1 files changed, 204 insertions, 0 deletions
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr42.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
new file mode 100644
index 0000000000..ccf2554ca3
--- /dev/null
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8068-mr42.dts
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+
+#include "qcom-ipq8068-cryptid-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Meraki MR42";
+	compatible = "meraki,mr42", "qcom,ipq8064";
+
+	aliases {
+		serial1 = &gsbi1_serial;
+		ethernet0 = &gmac3;
+
+		led-boot = &led_active;
+		led-failsafe = &led_power;
+		led-running = &led_active;
+		led-upgrade = &led_active;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		reset {
+			label = "reset";
+			gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+			debounce-interval = <60>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led_power: power {
+			label = "orange:power";
+			gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>;
+		};
+
+		led_active: active {
+			label = "white:active";
+			gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&gmac3 {
+	status = "okay";
+
+	qcom,id = <3>;
+	mdiobus = <&mdio0>;
+
+	phy-mode = "sgmii";
+	phy-handle = <&phy2>;
+
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gsbi2 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C>;
+};
+
+&gsbi2_i2c {
+	status = "okay";
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	ina2xx@40 {
+		compatible = "ina219";
+		shunt-resistor = <40000>;
+		reg = <0x40>;
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x56>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
+
+&gsbi6 {
+	qcom,mode = <GSBI_PROT_I2C>;
+	status = "okay";
+};
+
+&gsbi6_i2c {
+	status = "okay";
+
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	tlc591xx@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "ti,tlc59108";
+		reg = <0x40>;
+
+		red@0 {
+			label = "red:user";
+			reg = <0x0>;
+		};
+
+		green@1 {
+			label = "green:user";
+			reg = <0x1>;
+		};
+
+		blue@2 {
+			label = "blue:user";
+			reg = <0x2>;
+		};
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	pinctrl-0 = <&mdio0_pins_active>, <&phy_active>;
+	pinctrl-names = "default";
+
+	phy2: ethernet-phy2 {
+		reg = <2>;
+
+		reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <24000>;
+
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&qcom_pinmux {
+	i2c0_pins: i2c0_pins {
+		mux {
+			pins = "gpio24", "gpio25";
+			function = "gsbi2";
+			drive-strength = <2>;
+			bias-pull-up;
+			input;
+		};
+	};
+
+	button_pins: button_pins {
+		mux {
+			pins = "gpio26";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	i2c1_pins: i2c1_pins {
+		mux {
+			pins = "gpio29", "gpio30";
+			function = "gsbi6";
+			drive-strength = <2>;
+			bias-pull-up;
+			input;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio31", "gpio32";
+			function = "gpio";
+			drive-strength = <12>;
+			bias-pull-down;
+			output-low;
+		};
+	};
+};
+
+&wifi0 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <1>;
+};
+
+&wifi1 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <2>;
+};
+
+&wifi2 {
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+	mac-address-increment = <3>;
+};