diff options
Diffstat (limited to 'target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts')
| -rw-r--r-- | target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts | 279 |
1 files changed, 0 insertions, 279 deletions
diff --git a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts deleted file mode 100644 index 735ccb2d53..0000000000 --- a/target/linux/ipq806x/files-5.10/arch/arm/boot/dts/qcom-ipq8064-g10.dts +++ /dev/null @@ -1,279 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-ipq8064-v2.0.dtsi" - -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - compatible = "asrock,g10", "qcom,ipq8064"; - model = "ASRock G10"; - - aliases { - ethernet0 = &gmac1; - ethernet1 = &gmac0; - - led-boot = &led_status_blue; - led-failsafe = &led_status_amber; - led-running = &led_status_blue; - led-upgrade = &led_status_amber; - }; - - chosen { - bootargs-override = "console=ttyMSM0,115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - /* - * this is a bit misleading. Because there are about seven - * multicolor LEDs connected all wired together in parallel. - */ - - status_yellow { - label = "yellow:status"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - led_status_amber: status_amber { - label = "amber:status"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - led_status_blue: status_blue { - label = "blue:status"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - /* - * LED is declared in vendors boardfile but it's not - * working and the manual doesn't mention anything - * about the LED being white. - - status_white { - label = "white:status"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - */ - }; - - i2c-gpio { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "i2c-gpio"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */ - <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <5>; - i2c-gpio,scl-output-only; - - mcu@50 { - reg = <0x50>; - compatible = "sonix,sn8f25e21"; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - ir-remote { - label = "ir-remote"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = <BTN_0>; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - debounce-interval = <60>; - wakeup-source; - }; - - wps5g { - label = "wps5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - - wps2g { - label = "wps2g"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WPS_BUTTON>; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - ethernet-phy@0 { - reg = <0>; - qca,ar8327-initvals = < - 0x00004 0x7600000 /* PAD0_MODE */ - 0x00008 0x1000000 /* PAD5_MODE */ - 0x0000c 0x80 /* PAD6_MODE */ - 0x000e4 0x6a545 /* MAC_POWER_SEL */ - 0x000e0 0xc74164de /* SGMII_CTRL */ - 0x0007c 0x4e /* PORT0_STATUS */ - 0x00094 0x4e /* PORT6_STATUS */ - >; - }; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot_pages_size = <0x1200000>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi5g: wifi@1,0 { - reg = <0x00010000 0 0 0 0>; - compatible = "qcom,ath10k"; - qcom,ath10k-calibration-variant = "ASRock-G10"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2g: wifi@1,0 { - reg = <0x00010000 0 0 0 0>; - compatible = "qcom,ath10k"; - qcom,ath10k-calibration-variant = "ASRock-G10"; - }; - }; -}; - -&qcom_pinmux { - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio15", "gpio16", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&rpm { - pinctrl-0 = <&i2c4_pins>; - pinctrl-names = "default"; -}; - -&usb3_0 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&tcsr { - qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>; -}; - -/delete-node/ &pcie2_pins; -/delete-node/ &pcie2; |