aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts')
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts535
1 files changed, 0 insertions, 535 deletions
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
deleted file mode 100644
index 7b5ee799ee..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ /dev/null
@@ -1,535 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Buffalo WXR-2533DHP";
- compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
-
- memory@42000000 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
-
- led-boot = &power;
- led-failsafe = &diag;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- /* use "ubi_rootfs" volume in "ubi" partition as rootfs */
- bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- nand@1ac00000 {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ubi@0 {
- label = "ubi";
- reg = <0x0000000 0x4000000>;
- };
-
- rootfs_1@4000000 {
- label = "rootfs_1";
- reg = <0x4000000 0x4000000>;
- };
- };
- };
- };
-
- mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x07600000 /* PAD0_MODE */
- 0x00008 0x01000000 /* PAD5_MODE */
- 0x0000c 0x00000080 /* PAD6_MODE */
- 0x00050 0xcc35cc35 /* LED_CTRL0 */
- 0x00054 0xca35ca35 /* LED_CTRL1 */
- 0x00058 0xc935c935 /* LED_CTRL2 */
- 0x0005c 0x03ffff00 /* LED_CTRL3 */
- 0x000e4 0x0006a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x0000007e /* PORT0_STATUS */
- 0x00094 0x0000007e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb {
- label = "wxr-2533dhp:green:usb";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port0 &hub_port1>;
- };
-
- guestport {
- label = "wxr-2533dhp:green:guestport";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- diag: diag {
- label = "wxr-2533dhp:orange:diag";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- internet_orange {
- label = "wxr-2533dhp:orange:internet";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- internet_white {
- label = "wxr-2533dhp:white:internet";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wireless_orange {
- label = "wxr-2533dhp:orange:wireless";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wireless_white {
- label = "wxr-2533dhp:white:wireless";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- router_orange {
- label = "wxr-2533dhp:orange:router";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
- };
-
- router_white {
- label = "wxr-2533dhp:white:router";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- power: power {
- label = "wxr-2533dhp:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- power {
- label = "power";
- gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- eject {
- label = "eject";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_EJECTCD>;
- };
-
- guest {
- label = "guest";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- ap {
- label = "ap";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
-
- router {
- label = "router";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
-
- auto {
- label = "auto";
- gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&ART 6>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "ok";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&ART 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi4_serial {
- status = "okay";
-
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&gsbi5 {
- status = "okay";
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- MIBIB@10000 {
- label = "MIBIB";
- reg = <0x10000 0x20000>;
- read-only;
- };
-
- SBL2@30000 {
- label = "SBL2";
- reg = <0x30000 0x30000>;
- read-only;
- };
-
- SBL3@60000 {
- label = "SBL3";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- DDRCONFIG@90000 {
- label = "DDRCONFIG";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- SSD@a0000 {
- label = "SSD";
- reg = <0xa0000 0x10000>;
- read-only;
- };
-
- TZ@b0000 {
- label = "TZ";
- reg = <0xb0000 0x30000>;
- read-only;
- };
-
- RPM@e0000 {
- label = "RPM";
- reg = <0xe0000 0x20000>;
- read-only;
- };
-
- APPSBL@100000 {
- label = "APPSBL";
- reg = <0x100000 0x70000>;
- read-only;
- };
-
- APPSBLENV@170000 {
- label = "APPSBLENV";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- ART: ART@180000 {
- label = "ART";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- BOOTCONFIG@1c0000 {
- label = "BOOTCONFIG";
- reg = <0x1c0000 0x10000>;
- read-only;
- };
-
- APPSBL_1@1d0000 {
- label = "APPSBL_1";
- reg = <0x1d0000 0x70000>;
- read-only;
- };
- };
- };
- };
-};
-
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&dwc3_0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&dwc3_1 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
- force_gen1 = <1>;
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
- "gpio58", "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
- "gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs{
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
-
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
-
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- usb_pwr_en_pins: usb_pwr_en_pins {
- mux{
- pins = "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- output-high;
- };
- };
-}; \ No newline at end of file
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-29 21:11:43 +0000