diff options
Diffstat (limited to 'target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata')
| -rw-r--r-- | target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 4f21d4a4ef..bdc36070f2 100644 --- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -23,8 +23,8 @@ ath10kcal_die() { ath10kcal_from_file() { local source=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \ ath10kcal_die "failed to extract calibration data from $source" @@ -32,8 +32,8 @@ ath10kcal_from_file() { ath10kcal_extract() { local part=$1 - local offset=$2 - local count=$3 + local offset=$(($2)) + local count=$(($3)) local mtd mtd=$(find_mtd_chardev $part) @@ -80,33 +80,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0000:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x1e) ;; linksys,ea8500) - ath10kcal_extract "art" 4096 12064 + ath10kcal_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1) ;; nec,wg2600hp) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary PRODUCTDATA 0xc) +1) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 4096 12064 + ath10kcal_extract "art" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +1) ;; tplink,c2600) - ath10kcal_extract "radio" 4096 12064 + ath10kcal_extract "radio" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x8) -1) ;; tplink,vr2600v) - ath10kcal_extract "ART" 4096 12064 + ath10kcal_extract "ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary default-mac 0x0) -1) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 4096 12064 + ath10kcal_extract "0:ART" 0x1000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) ;; esac @@ -114,33 +114,33 @@ case "$FIRMWARE" in "ath10k/pre-cal-pci-0001:01:00.0.bin") case $board in buffalo,wxr-2533dhp) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary ART 0x18) ;; linksys,ea8500) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2) ;; nec,wg2600hp) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary PRODUCTDATA 0xc) ;; netgear,d7800 |\ netgear,r7500v2 |\ netgear,r7800) - ath10kcal_extract "art" 20480 12064 + ath10kcal_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x6) +2) ;; tplink,c2600) - ath10kcal_extract "radio" 20480 12064 + ath10kcal_extract "radio" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x8) ;; tplink,vr2600v) - ath10kcal_extract "ART" 20480 12064 + ath10kcal_extract "ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary default-mac 0x0) ;; zyxel,nbg6817) - ath10kcal_extract "0:ART" 20480 12064 + ath10kcal_extract "0:ART" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) ;; esac |