diff options
Diffstat (limited to 'target/linux/ipq806x/a')
| -rw-r--r-- | target/linux/ipq806x/a | 464 |
1 files changed, 464 insertions, 0 deletions
diff --git a/target/linux/ipq806x/a b/target/linux/ipq806x/a new file mode 100644 index 0000000000..eddecefd6d --- /dev/null +++ b/target/linux/ipq806x/a @@ -0,0 +1,464 @@ +commit be3de98aef65403129a4b714ddce8ab71f563209 +Author: Ash Benz <ash.benz@bk.ru> +Date: Fri May 27 22:26:45 2016 +0800 + + ipq806x/dts: Add Archer C2600 DTS + + Signed-off-by: Ash Benz <ash.benz@bk.ru> + +diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile +index 52cc1fa..77391d0 100644 +--- a/target/linux/ipq806x/image/Makefile ++++ b/target/linux/ipq806x/image/Makefile +@@ -36,11 +36,6 @@ define Build/append-dtb + cat $(DTS_DIR)/$(DEVICE_DTS).dtb >> $@ + endef + +-define Build/append-new-dtb +- $(call Image/BuildDTB,../dts/$(DEVICE_DTS).dts,$@.dtb) +- cat $@.dtb >> $@ +-endef +- + define Build/append-file + cat $(1) >> $@ + endef +@@ -95,7 +90,7 @@ define Device/TpSafeImage + PROFILES += $$(DEVICE_NAME) + FILESYSTEMS := squashfs + KERNEL_SUFFIX := -uImage +- KERNEL = kernel-bin | append-new-dtb | uImage none ++ KERNEL = kernel-bin | append-dtb | uImage none + KERNEL_NAME := zImage + TPLINK_BOARD_NAME := + IMAGES := factory.bin sysupgrade.bin +diff --git a/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch +new file mode 100644 +index 0000000..8952f33 +--- /dev/null ++++ b/target/linux/ipq806x/patches-4.4/802-ARM-qcom-add-TPLink-C2600-device-tree.patch +@@ -0,0 +1,425 @@ ++--- a/arch/arm/boot/dts/Makefile +++++ b/arch/arm/boot/dts/Makefile ++@@ -506,6 +506,7 @@ ++ qcom-apq8084-ifc6540.dtb \ ++ qcom-apq8084-mtp.dtb \ ++ qcom-ipq8064-ap148.dtb \ +++ qcom-ipq8064-c2600.dtb \ ++ qcom-ipq8064-db149.dtb \ ++ qcom-ipq8064-r7500.dtb \ ++ qcom-ipq8064-d7800.dtb \ ++--- /dev/null +++++ b/arch/arm/boot/dts/qcom-ipq8064-c2600.dts ++@@ -0,0 +1,412 @@ +++#include "qcom-ipq8064-v1.0.dtsi" +++#include <dt-bindings/input/input.h> +++ +++/ { +++ model = "TP-Link Archer C2600"; +++ compatible = "tplink,c2600", "qcom,ipq8064"; +++ +++ memory@0 { +++ reg = <0x42000000 0x1e000000>; +++ device_type = "memory"; +++ }; +++ +++ reserved-memory { +++ #address-cells = <1>; +++ #size-cells = <1>; +++ ranges; +++ rsvd@41200000 { +++ reg = <0x41200000 0x300000>; +++ no-map; +++ }; +++ }; +++ +++ aliases { +++ serial0 = &uart4; +++ mdio-gpio0 = &mdio0; +++ }; +++ +++ chosen { +++ linux,stdout-path = "serial0:115200n8"; +++ }; +++ +++ soc { +++ pinmux@800000 { +++ i2c4_pins: i2c4_pinmux { +++ pins = "gpio12", "gpio13"; +++ function = "gsbi4"; +++ bias-disable; +++ }; +++ +++ spi_pins: spi_pins { +++ mux { +++ pins = "gpio18", "gpio19", "gpio21"; +++ function = "gsbi5"; +++ drive-strength = <10>; +++ bias-none; +++ }; +++ }; +++ +++ nand_pins: nand_pins { +++ mux { +++ pins = "gpio34", "gpio35", "gpio36", +++ "gpio37", "gpio38", "gpio39", +++ "gpio40", "gpio41", "gpio42", +++ "gpio43", "gpio44", "gpio45", +++ "gpio46", "gpio47"; +++ function = "nand"; +++ drive-strength = <10>; +++ bias-disable; +++ }; +++ +++ pullups { +++ pins = "gpio39"; +++ bias-pull-up; +++ }; +++ +++ hold { +++ pins = "gpio40", "gpio41", "gpio42", +++ "gpio43", "gpio44", "gpio45", +++ "gpio46", "gpio47"; +++ bias-bus-hold; +++ }; +++ }; +++ +++ mdio0_pins: mdio0_pins { +++ mux { +++ pins = "gpio0", "gpio1"; +++ function = "gpio"; +++ drive-strength = <8>; +++ bias-disable; +++ }; +++ }; +++ +++ rgmii2_pins: rgmii2_pins { +++ mux { +++ pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", +++ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ; +++ function = "rgmii2"; +++ drive-strength = <8>; +++ bias-disable; +++ }; +++ }; +++ }; +++ +++ gsbi@16300000 { +++ qcom,mode = <GSBI_PROT_I2C_UART>; +++ status = "ok"; +++ serial@16340000 { +++ status = "ok"; +++ }; +++ /* +++ * The i2c device on gsbi4 should not be enabled. +++ * On ipq806x designs gsbi4 i2c is meant for exclusive +++ * RPM usage. Turning this on in kernel manifests as +++ * i2c failure for the RPM. +++ */ +++ }; +++ +++ gsbi5: gsbi@1a200000 { +++ qcom,mode = <GSBI_PROT_SPI>; +++ status = "ok"; +++ +++ spi4: spi@1a280000 { +++ status = "ok"; +++ spi-max-frequency = <50000000>; +++ +++ pinctrl-0 = <&spi_pins>; +++ pinctrl-names = "default"; +++ +++ cs-gpios = <&qcom_pinmux 20 0>; +++ +++ flash: m25p80@0 { +++ compatible = "s25fl256s1"; +++ #address-cells = <1>; +++ #size-cells = <1>; +++ spi-max-frequency = <50000000>; +++ reg = <0>; +++ +++ SBL1@0 { +++ label = "SBL1"; +++ reg = <0x0 0x20000>; +++ read-only; +++ }; +++ MIBIB@20000 { +++ label = "MIBIB"; +++ reg = <0x20000 0x20000>; +++ read-only; +++ }; +++ SBL2@40000 { +++ label = "SBL2"; +++ reg = <0x40000 0x20000>; +++ read-only; +++ }; +++ SBL3@60000 { +++ label = "SBL3"; +++ reg = <0x60000 0x30000>; +++ read-only; +++ }; +++ DDRCONFIG@90000 { +++ label = "DDRCONFIG"; +++ reg = <0x90000 0x10000>; +++ read-only; +++ }; +++ SSD@a0000 { +++ label = "SSD"; +++ reg = <0xa0000 0x10000>; +++ read-only; +++ }; +++ TZ@b0000 { +++ label = "TZ"; +++ reg = <0xb0000 0x30000>; +++ read-only; +++ }; +++ RPM@e0000 { +++ label = "RPM"; +++ reg = <0xe0000 0x20000>; +++ read-only; +++ }; +++ fs-uboot@100000 { +++ label = "fs-uboot"; +++ reg = <0x100000 0x70000>; +++ read-only; +++ }; +++ uboot-env@170000 { +++ label = "uboot-env"; +++ reg = <0x170000 0x40000>; +++ read-only; +++ }; +++ radio@1b0000 { +++ label = "radio"; +++ reg = <0x1b0000 0x40000>; +++ read-only; +++ }; +++ os-image@1f0000 { +++ label = "os-image"; +++ reg = <0x1f0000 0x200000>; +++ }; +++ rootfs@3f0000 { +++ label = "rootfs"; +++ reg = <0x3f0000 0x1b00000>; +++ }; +++ defaultmac: default-mac@1ef0000 { +++ label = "default-mac"; +++ reg = <0x1ef0000 0x00200>; +++ read-only; +++ }; +++ pin@1ef0200 { +++ label = "pin"; +++ reg = <0x1ef0200 0x00200>; +++ read-only; +++ }; +++ product-info@1ef0400 { +++ label = "product-info"; +++ reg = <0x1ef0400 0x0fc00>; +++ read-only; +++ }; +++ partition-table@1f00000 { +++ label = "partition-table"; +++ reg = <0x1f00000 0x10000>; +++ read-only; +++ }; +++ soft-version@1f10000 { +++ label = "soft-version"; +++ reg = <0x1f10000 0x10000>; +++ read-only; +++ }; +++ support-list@1f20000 { +++ label = "support-list"; +++ reg = <0x1f20000 0x10000>; +++ read-only; +++ }; +++ profile@1f30000 { +++ label = "profile"; +++ reg = <0x1f30000 0x10000>; +++ read-only; +++ }; +++ default-config@1f40000 { +++ label = "default-config"; +++ reg = <0x1f40000 0x10000>; +++ read-only; +++ }; +++ user-config@1f50000 { +++ label = "user-config"; +++ reg = <0x1f50000 0x40000>; +++ read-only; +++ }; +++ qos-db@1f90000 { +++ label = "qos-db"; +++ reg = <0x1f90000 0x40000>; +++ read-only; +++ }; +++ usb-config@1fd0000 { +++ label = "usb-config"; +++ reg = <0x1fd0000 0x10000>; +++ read-only; +++ }; +++ log@1fe0000 { +++ label = "log"; +++ reg = <0x1fe0000 0x20000>; +++ read-only; +++ }; +++ }; +++ }; +++ }; +++ +++ phy@100f8800 { /* USB3 port 1 HS phy */ +++ status = "ok"; +++ }; +++ +++ phy@100f8830 { /* USB3 port 1 SS phy */ +++ status = "ok"; +++ }; +++ +++ phy@110f8800 { /* USB3 port 0 HS phy */ +++ status = "ok"; +++ }; +++ +++ phy@110f8830 { /* USB3 port 0 SS phy */ +++ status = "ok"; +++ }; +++ +++ usb30@0 { +++ status = "ok"; +++ }; +++ +++ usb30@1 { +++ status = "ok"; +++ }; +++ +++ pcie0: pci@1b500000 { +++ status = "ok"; +++ phy-tx0-term-offset = <7>; +++ }; +++ +++ pcie1: pci@1b700000 { +++ status = "ok"; +++ phy-tx0-term-offset = <7>; +++ }; +++ +++ mdio0: mdio { +++ compatible = "virtual,mdio-gpio"; +++ #address-cells = <1>; +++ #size-cells = <0>; +++ gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>; +++ pinctrl-0 = <&mdio0_pins>; +++ pinctrl-names = "default"; +++ +++ phy0: ethernet-phy@0 { +++ device_type = "ethernet-phy"; +++ reg = <0>; +++ qca,ar8327-initvals = < +++ 0x00004 0x7600000 /* PAD0_MODE */ +++ 0x00008 0x1000000 /* PAD5_MODE */ +++ 0x0000c 0x80 /* PAD6_MODE */ +++ 0x000e4 0xaa545 /* MAC_POWER_SEL */ +++ 0x000e0 0xc74164de /* SGMII_CTRL */ +++ 0x0007c 0x4e /* PORT0_STATUS */ +++ 0x00094 0x4e /* PORT6_STATUS */ +++ >; +++ }; +++ +++ phy4: ethernet-phy@4 { +++ device_type = "ethernet-phy"; +++ reg = <4>; +++ }; +++ }; +++ +++ gmac1: ethernet@37200000 { +++ status = "ok"; +++ phy-mode = "rgmii"; +++ qcom,id = <1>; +++ +++ pinctrl-0 = <&rgmii2_pins>; +++ pinctrl-names = "default"; +++ +++ mtd-mac-address = <&defaultmac 0x8>; +++ mtd-mac-address-increment = <1>; +++ +++ fixed-link { +++ speed = <1000>; +++ full-duplex; +++ }; +++ }; +++ +++ gmac2: ethernet@37400000 { +++ status = "ok"; +++ phy-mode = "sgmii"; +++ qcom,id = <2>; +++ +++ mtd-mac-address = <&defaultmac 0x8>; +++ +++ fixed-link { +++ speed = <1000>; +++ full-duplex; +++ }; +++ }; +++ }; +++ +++ gpio-keys { +++ compatible = "gpio-keys"; +++ +++ wifi { +++ label = "wifi"; +++ gpios = <&qcom_pinmux 49 1>; +++ linux,code = <KEY_WLAN>; +++ }; +++ +++ reset { +++ label = "reset"; +++ gpios = <&qcom_pinmux 64 1>; +++ linux,code = <KEY_RESTART>; +++ }; +++ +++ wps { +++ label = "wps"; +++ gpios = <&qcom_pinmux 65 1>; +++ linux,code = <KEY_WPS_BUTTON>; +++ }; +++ ledgeneral { +++ label = "ledgeneral"; +++ gpios = <&qcom_pinmux 16 1>; +++ linux,code = <KEY_DOLLAR>; +++ }; +++ }; +++ +++ gpio-leds { +++ compatible = "gpio-leds"; +++ +++ lan { +++ label = "lan:blue"; +++ gpios = <&qcom_pinmux 6 0>; +++ }; +++ usb4 { +++ label = "usb_4:blue"; +++ gpios = <&qcom_pinmux 7 0>; +++ }; +++ usb2 { +++ label = "usb_2:blue"; +++ gpios = <&qcom_pinmux 8 0>; +++ }; +++ wps { +++ label = "wps:blue"; +++ gpios = <&qcom_pinmux 9 0>; +++ }; +++ wan_blue { +++ label = "wan:blue"; +++ gpios = <&qcom_pinmux 33 1>; +++ }; +++ status { +++ label = "status:blue"; +++ gpios = <&qcom_pinmux 53 0>; +++ default-state = "on"; +++ }; +++ ledgnr { +++ label = "ledgnr:blue"; +++ gpios = <&qcom_pinmux 66 0>; +++ }; +++ }; +++}; +++ +++&adm_dma { +++ status = "ok"; +++}; |