diff options
Diffstat (limited to 'target/linux/ipq40xx')
-rw-r--r-- | target/linux/ipq40xx/base-files/etc/board.d/02_network | 1 | ||||
-rw-r--r-- | target/linux/ipq40xx/base-files/lib/upgrade/platform.sh | 1 | ||||
-rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dts | 226 | ||||
-rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi (renamed from target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dtsi) | 2 | ||||
-rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts | 10 | ||||
-rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts | 12 | ||||
-rw-r--r-- | target/linux/ipq40xx/image/generic.mk | 13 |
7 files changed, 258 insertions, 7 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 77dc892d07..5de62f1d7d 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -108,6 +108,7 @@ ipq40xx_setup_interfaces() zte,mf286d) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan" ;; + zte,mf287|\ zte,mf287plus|\ zte,mf287pro) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index 83aac330ca..97f14b45f9 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -27,6 +27,7 @@ EOF ;; zte,mf18a |\ zte,mf286d |\ + zte,mf287|\ zte,mf287plus |\ zte,mf287pro |\ zte,mf289f) diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dts new file mode 100644 index 0000000000..722f25053d --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dts @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>. +// Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. +// Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> + +#include "qcom-ipq4018-mf287_common.dtsi" + +/ { + model = "ZTE MF287"; + compatible = "zte,mf287"; + + /* + * This node is used to restart modem module to avoid anomalous + * behaviours on initial communication. + */ + gpio-restart { + compatible = "gpio-restart"; + gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + }; +}; + +&key_reset { + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; +}; + +&key_wps { + gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; +}; + +&led_status { + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, + <&tlmm 59 GPIO_ACTIVE_HIGH>, + <&tlmm 1 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "0:APPSBL"; + reg = <0xf0000 0xc0000>; + read-only; + }; + + partition@1b0000 { + label = "0:reserved1"; + reg = <0x1b0000 0x50000>; + read-only; + }; + }; + }; + + spi-nand@1 { /* flash@1 ? */ + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fota-flag"; + reg = <0x0 0x140000>; + read-only; + }; + + partition@140000 { + label = "ART"; + reg = <0x140000 0x140000>; + read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + }; + + partition@280000 { + label = "mac"; + reg = <0x280000 0x140000>; + read-only; + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_mac_0: macaddr@0 { + reg = <0x0 0x6>; + }; + }; + + partition@3c0000 { + label = "cfg-param"; + reg = <0x3c0000 0x600000>; + read-only; + }; + + partition@9c0000 { + label = "oops"; + reg = <0x9c0000 0x140000>; + }; + + partition@b00000 { + label = "web"; + reg = <0xb00000 0x800000>; + }; + + partition@1300000 { + label = "rootfs"; + reg = <0x1300000 0x2200000>; + }; + + partition@3500000 { + label = "data"; + reg = <0x3500000 0x1900000>; + }; + + partition@4e00000 { + label = "fota"; + reg = <0x4e00000 0x3200000>; + }; + }; + }; + + zigbee@2 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "silabs,em3581"; + reg = <2>; + spi-max-frequency = <12000000>; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio54", "gpio59", "gpio1"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&wifi0 { + qcom,ath10k-calibration-variant = "zte,mf287"; +}; + +&wifi1{ + qcom,ath10k-calibration-variant = "zte,mf287"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi index 3cbe2eaa38..dcb4915ae0 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287.dtsi +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287_common.dtsi @@ -171,7 +171,6 @@ status = "okay"; nvmem-cell-names = "pre-calibration", "mac-address"; nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>; - qcom,ath10k-calibration-variant = "zte,mf287plus"; }; &wifi1 { @@ -179,5 +178,4 @@ nvmem-cell-names = "pre-calibration", "mac-address"; nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>; mac-address-increment = <1>; - qcom,ath10k-calibration-variant = "zte,mf287plus"; }; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts index db8c8c9ad0..b5f386fa4b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts @@ -3,7 +3,7 @@ // Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. // Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> -#include "qcom-ipq4018-mf287.dtsi" +#include "qcom-ipq4018-mf287_common.dtsi" / { model = "ZTE MF287Plus"; @@ -216,3 +216,11 @@ }; }; }; + +&wifi0 { + qcom,ath10k-calibration-variant = "zte,mf287plus"; +}; + +&wifi1{ + qcom,ath10k-calibration-variant = "zte,mf287plus"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts index dda0f74449..0af7b0426b 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287pro.dts @@ -3,7 +3,7 @@ // Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>. // Copyright (c) 2023, Andreas Böhler <dev@aboehler.at> -#include "qcom-ipq4018-mf287.dtsi" +#include "qcom-ipq4018-mf287_common.dtsi" / { model = "ZTE MF287Pro"; @@ -263,3 +263,13 @@ }; }; }; + +/* The MF287Plus and MF287Pro share the same board data file */ +&wifi0 { + qcom,ath10k-calibration-variant = "zte,mf287plus"; +}; + +/* The MF287Plus and MF287Pro share the same board data file */ +&wifi1{ + qcom,ath10k-calibration-variant = "zte,mf287plus"; +}; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 08cbd63b3c..99a9b78b78 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -1164,7 +1164,6 @@ TARGET_DEVICES += zte_mf286d define Device/zte_mf287_common $(call Device/zte_mf28x_common) - DEVICE_PACKAGES += ipq-wifi-zte_mf287plus SOC := qcom-ipq4018 # The recovery image is used to return back to stock (an initramfs-based image # that can be flashed to the device via sysupgrade @@ -1177,15 +1176,23 @@ endef define Device/zte_mf287plus $(call Device/zte_mf287_common) + DEVICE_PACKAGES += ipq-wifi-zte_mf287plus DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 DEVICE_MODEL := MF287Plus - DEVICE_ALT0_VENDOR := ZTE - DEVICE_ALT0_MODEL := MF287 endef TARGET_DEVICES += zte_mf287plus +define Device/zte_mf287 + $(call Device/zte_mf287_common) + DEVICE_PACKAGES += ipq-wifi-zte_mf287 + DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 + DEVICE_MODEL := MF287 +endef +TARGET_DEVICES += zte_mf287 + define Device/zte_mf287pro $(call Device/zte_mf287_common) + DEVICE_PACKAGES += ipq-wifi-zte_mf287plus DEVICE_DTS_CONFIG := config@ap.dk04.1-c1 DEVICE_MODEL := MF287Pro endef |