diff options
Diffstat (limited to 'target/linux/ipq40xx')
12 files changed, 46 insertions, 46 deletions
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts index 0fd4318527..17d9215544 100644 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -19,7 +19,7 @@ soc { edma@c080000 { qcom,num_gmac = <1>; - status = "ok"; + status = "okay"; }; tcsr@1949000 { @@ -41,25 +41,25 @@ }; rng@22000 { - status = "ok"; + status = "okay"; }; crypto@8e3a000 { - status = "ok"; + status = "okay"; }; watchdog@b017000 { - status = "ok"; + status = "okay"; }; ess-switch@c000000 { - status = "ok"; + status = "okay"; switch_lan_bmp = <0x20>; switch_wan_bmp = <0x00>; }; ess-psgmii@98000 { - status = "ok"; + status = "okay"; }; }; @@ -91,7 +91,7 @@ &blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; flash@0 { @@ -179,17 +179,17 @@ }; &blsp_dma { - status = "ok"; + status = "okay"; }; &blsp1_uart1 { pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; &cryptobam { - status = "ok"; + status = "okay"; }; &gmac0 { @@ -201,7 +201,7 @@ }; &mdio { - status = "ok"; + status = "okay"; }; &tlmm { @@ -231,11 +231,11 @@ }; &wifi0 { - status = "ok"; + status = "okay"; qcom,ath10k-calibration-variant = "dlink,dap-2610"; }; &wifi1 { - status = "ok"; + status = "okay"; qcom,ath10k-calibration-variant = "dlink,dap-2610"; }; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts index 6cf9d46767..3a0e0b8cfa 100644 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts @@ -275,7 +275,7 @@ i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; serial@78af000 { diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts index 0859f97c9e..1f7a728492 100644 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts @@ -87,7 +87,7 @@ i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; tpm@29 { /* No Driver */ diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi index 6cf80d47d6..4d1d82a272 100644 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi +++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi @@ -78,7 +78,7 @@ i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; tpm@29 { /* No Driver */ diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts index 0fd4318527..17d9215544 100644 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -19,7 +19,7 @@ soc { edma@c080000 { qcom,num_gmac = <1>; - status = "ok"; + status = "okay"; }; tcsr@1949000 { @@ -41,25 +41,25 @@ }; rng@22000 { - status = "ok"; + status = "okay"; }; crypto@8e3a000 { - status = "ok"; + status = "okay"; }; watchdog@b017000 { - status = "ok"; + status = "okay"; }; ess-switch@c000000 { - status = "ok"; + status = "okay"; switch_lan_bmp = <0x20>; switch_wan_bmp = <0x00>; }; ess-psgmii@98000 { - status = "ok"; + status = "okay"; }; }; @@ -91,7 +91,7 @@ &blsp1_spi1 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; flash@0 { @@ -179,17 +179,17 @@ }; &blsp_dma { - status = "ok"; + status = "okay"; }; &blsp1_uart1 { pinctrl-0 = <&serial_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; &cryptobam { - status = "ok"; + status = "okay"; }; &gmac0 { @@ -201,7 +201,7 @@ }; &mdio { - status = "ok"; + status = "okay"; }; &tlmm { @@ -231,11 +231,11 @@ }; &wifi0 { - status = "ok"; + status = "okay"; qcom,ath10k-calibration-variant = "dlink,dap-2610"; }; &wifi1 { - status = "ok"; + status = "okay"; qcom,ath10k-calibration-variant = "dlink,dap-2610"; }; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts index 6cf9d46767..3a0e0b8cfa 100644 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts @@ -275,7 +275,7 @@ i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; }; serial@78af000 { diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts index 0859f97c9e..1f7a728492 100644 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts @@ -87,7 +87,7 @@ i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; tpm@29 { /* No Driver */ diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi index 6cf80d47d6..4d1d82a272 100644 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi +++ b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi @@ -78,7 +78,7 @@ i2c_0: i2c@78b7000 { pinctrl-0 = <&i2c_0_pins>; pinctrl-names = "default"; - status = "ok"; + status = "okay"; tpm@29 { /* No Driver */ diff --git a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch index e02fdf59c2..30a0678fd8 100644 --- a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -19,23 +19,23 @@ Signed-off-by: John Crispin <john@phrozen.org> }; + + usb3_ss_phy: ssphy@9a000 { -+ status = "ok"; ++ status = "okay"; + }; + + usb3_hs_phy: hsphy@a6000 { -+ status = "ok"; ++ status = "okay"; + }; + + usb3: usb3@8af8800 { -+ status = "ok"; ++ status = "okay"; + }; + + usb2_hs_phy: hsphy@a8000 { -+ status = "ok"; ++ status = "okay"; + }; + + usb2: usb2@60f8800 { -+ status = "ok"; ++ status = "okay"; + }; }; }; diff --git a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch index 48825375eb..5157079762 100644 --- a/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch +++ b/target/linux/ipq40xx/patches-4.19/900-dts-ipq4019-ap-dk01.1.patch @@ -17,7 +17,7 @@ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; -+ status = "ok"; ++ status = "okay"; + }; + + ess_tcsr@1953000 { @@ -77,7 +77,7 @@ + }; + usb3_ss_phy: ssphy@9a000 { - status = "ok"; + status = "okay"; }; --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts diff --git a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch index fbcbecf080..5efc08bcca 100644 --- a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ b/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -19,23 +19,23 @@ Signed-off-by: John Crispin <john@phrozen.org> }; + + usb3_ss_phy: ssphy@9a000 { -+ status = "ok"; ++ status = "okay"; + }; + + usb3_hs_phy: hsphy@a6000 { -+ status = "ok"; ++ status = "okay"; + }; + + usb3: usb3@8af8800 { -+ status = "ok"; ++ status = "okay"; + }; + + usb2_hs_phy: hsphy@a8000 { -+ status = "ok"; ++ status = "okay"; + }; + + usb2: usb2@60f8800 { -+ status = "ok"; ++ status = "okay"; + }; }; }; diff --git a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch index 48825375eb..5157079762 100644 --- a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch +++ b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch @@ -17,7 +17,7 @@ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>; -+ status = "ok"; ++ status = "okay"; + }; + + ess_tcsr@1953000 { @@ -77,7 +77,7 @@ + }; + usb3_ss_phy: ssphy@9a000 { - status = "ok"; + status = "okay"; }; --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts |