aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq40xx')
-rw-r--r--target/linux/ipq40xx/base-files/etc/board.d/01_leds8
-rw-r--r--target/linux/ipq40xx/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches3
-rw-r--r--target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata6
-rw-r--r--target/linux/ipq40xx/base-files/lib/upgrade/platform.sh21
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts328
-rw-r--r--target/linux/ipq40xx/image/mikrotik.mk21
-rw-r--r--target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch3
-rw-r--r--target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch3
9 files changed, 392 insertions, 5 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
index b2545f41e1..8942ad2000 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -45,6 +45,14 @@ engenius,ens620ext)
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
+mikrotik,hap-ac3)
+ ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
+ ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
+ ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
+ ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
+ ;;
mikrotik,sxtsq-5-ac)
ucidef_set_rssimon "wlan0" "200000" "1"
ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 5d123109a2..7ccdf97a60 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -50,6 +50,7 @@ ipq40xx_setup_interfaces()
;;
asus,rt-ac58u|\
mikrotik,hap-ac2|\
+ mikrotik,hap-ac3|\
p2w,r619ac-64m|\
p2w,r619ac-128m|\
zyxel,nbg6617)
@@ -182,7 +183,8 @@ ipq40xx_setup_macs()
wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
- mikrotik,hap-ac2)
+ mikrotik,hap-ac2|\
+ mikrotik,hap-ac3)
wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
lan_mac=$(macaddr_add $wan_mac 1)
label_mac="$wan_mac"
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
index 9029eb3a82..4036e5356f 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
@@ -18,6 +18,9 @@ cilab,meshpoint-one)
compex,wpj428)
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
;;
+mikrotik,hap-ac3)
+ ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "452" "0"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f90c558015..1e1b445924 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -149,7 +149,8 @@ case "$FIRMWARE" in
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
;;
- mikrotik,hap-ac2)
+ mikrotik,hap-ac2 |\
+ mikrotik,hap-ac3)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
@@ -266,7 +267,8 @@ case "$FIRMWARE" in
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
;;
- mikrotik,hap-ac2|\
+ mikrotik,hap-ac2 |\
+ mikrotik,hap-ac3 |\
mikrotik,sxtsq-5-ac)
wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
index 605b1e7881..02833ebc3d 100644
--- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -55,6 +55,24 @@ zyxel_do_upgrade() {
fi
}
+platform_do_upgrade_mikrotik_nand() {
+ local fw_mtd=$(find_mtd_part kernel)
+ fw_mtd="${fw_mtd/block/}"
+ [ -n "$fw_mtd" ] || return
+
+ local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+ [ -n "$board_dir" ] || return
+
+ local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
+ [ -n "$kernel_len" ] || return
+
+ tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
+
+ CI_KERNPART="none"
+ nand_do_upgrade "$1"
+}
+
platform_do_upgrade() {
case "$(board_name)" in
8dev,jalapeno |\
@@ -119,6 +137,9 @@ platform_do_upgrade() {
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
default_do_upgrade "$1"
;;
+ mikrotik,hap-ac3)
+ platform_do_upgrade_mikrotik_nand "$1"
+ ;;
netgear,rbr50 |\
netgear,rbs50 |\
netgear,srr60 |\
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
new file mode 100644
index 0000000000..9aa58ffcb4
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "MikroTik hAP ac3";
+ compatible = "mikrotik,hap-ac3";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ led-boot = &led_status_blue;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_red;
+ };
+
+ soc {
+ rng@22000 {
+ status = "okay";
+ };
+
+ counter@4a1000 {
+ compatible = "qcom,qca-gcnt";
+ reg = <0x4a1000 0x4>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "okay";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ usb2: usb2@60f8800 {
+ status = "okay";
+ };
+
+ crypto@8e3a000 {
+ status = "okay";
+ };
+
+ watchdog@b017000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ mode {
+ label = "mode";
+ gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+
+ led {
+ label = "led";
+ gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_blue: status-blue {
+ label = "blue:status";
+ gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led_status_red: status-red {
+ label = "red:status";
+ gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
+ panic-indicator;
+ };
+
+ led_status_green: status-green {
+ label = "green:status";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+
+ wlan {
+ label = "green:wlan";
+ gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+ };
+
+ ethernet {
+ label = "green:ethernet";
+ gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+ };
+
+ wan {
+ label = "green:wan";
+ gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan1 {
+ label = "green:lan1";
+ gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan2 {
+ label = "green:lan2";
+ gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan3 {
+ label = "green:lan3";
+ gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan4 {
+ label = "green:lan4";
+ gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
+ };
+
+ poe {
+ label = "red:poe";
+ gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&tlmm {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio16", "gpio17";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pin {
+ function = "blsp_spi0";
+ pins = "gpio13", "gpio14", "gpio15";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
+ pin_cs {
+ function = "gpio";
+ pins = "gpio12";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+
+ nand_pins: nand_pins {
+ pullups {
+ pins = "gpio53", "gpio58", "gpio59";
+ function = "qpic";
+ bias-pull-up;
+ };
+
+ pulldowns {
+ pins = "gpio55", "gpio56", "gpio57", "gpio60",
+ "gpio62", "gpio63", "gpio64", "gpio65",
+ "gpio66", "gpio67", "gpio68", "gpio69";
+ function = "qpic";
+ bias-pull-down;
+ };
+ };
+
+ enable-usb-power {
+ gpio-hog;
+ gpios = <44 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "enable USB power";
+ };
+};
+
+&blsp_dma {
+ status = "okay";
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Qualcomm";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ compatible = "mikrotik,routerboot-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ label = "RouterBoot";
+ reg = <0x80000 0x80000>;
+ read-only;
+
+ hard_config {
+ read-only;
+ size = <0x2000>;
+ };
+
+ dtb_config {
+ read-only;
+ };
+
+ soft_config {
+ };
+ };
+ };
+ };
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&nand {
+ status = "okay";
+
+ pinctrl-0 = <&nand_pins>;
+ pinctrl-names = "default";
+
+ nand@0 {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x0 0xa00000>;
+ };
+
+ partition@a00000 {
+ label = "ubi";
+ reg = <0xa00000 0x7600000>;
+ };
+ };
+ };
+};
+
+&blsp1_uart1 {
+ status = "okay";
+
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&usb2_hs_phy {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+};
+
+&wifi0 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
+};
+
+&wifi1 {
+ status = "okay";
+
+ qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
+};
diff --git a/target/linux/ipq40xx/image/mikrotik.mk b/target/linux/ipq40xx/image/mikrotik.mk
index 31497608be..bfff58597f 100644
--- a/target/linux/ipq40xx/image/mikrotik.mk
+++ b/target/linux/ipq40xx/image/mikrotik.mk
@@ -10,6 +10,16 @@ define Device/mikrotik_nor
check-size | append-metadata
endef
+define Device/mikrotik_nand
+ DEVICE_VENDOR := MikroTik
+ KERNEL_NAME := vmlinux
+ KERNEL_INITRAMFS := kernel-bin | append-dtb-elf
+ KERNEL := kernel-bin | append-dtb-elf | package-kernel-ubifs | \
+ ubinize-kernel
+ IMAGES := nand-sysupgrade.bin
+ IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
define Device/mikrotik_hap-ac2
$(call Device/mikrotik_nor)
DEVICE_MODEL := hAP ac2
@@ -19,6 +29,17 @@ define Device/mikrotik_hap-ac2
endef
TARGET_DEVICES += mikrotik_hap-ac2
+define Device/mikrotik_hap-ac3
+ $(call Device/mikrotik_nand)
+ DEVICE_MODEL := hAP ac3
+ SOC := qcom-ipq4019
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_UBIFS_OPTS = -m $$(PAGESIZE) -e 124KiB -c $$(PAGESIZE) -x none
+ DEVICE_PACKAGES := kmod-ledtrig-gpio ipq-wifi-mikrotik_hap-ac3
+endef
+TARGET_DEVICES += mikrotik_hap-ac3
+
define Device/mikrotik_sxtsq-5-ac
$(call Device/mikrotik_nor)
DEVICE_MODEL := SXTsq 5 ac (RBSXTsqG-5acD)
diff --git a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
index 436f5a74f5..69ba9e4a43 100644
--- a/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-5.10/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -902,11 +902,67 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -902,11 +902,68 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -55,6 +55,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-habanero-dvk.dtb \
++ qcom-ipq4019-hap-ac3.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-mr8300.dtb \
+ qcom-ipq4019-pa2200.dtb \
diff --git a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
index bb63c1c4fb..0846c6668c 100644
--- a/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,65 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,66 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@@ -52,6 +52,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
++ qcom-ipq4019-hap-ac3.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-mr8300.dtb \
+ qcom-ipq4019-e2600ac-c1.dtb \