diff options
Diffstat (limited to 'target/linux/ipq40xx')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 18 | ||||
| -rw-r--r-- | target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh | 14 |
2 files changed, 16 insertions, 16 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 42cb295496..87876ad844 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -12,7 +12,7 @@ case "$FIRMWARE" in meraki,mr33) caldata_extract_ubi "ART" 0x9000 0x844 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844 - ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1) + ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1) ;; esac ;; @@ -128,7 +128,7 @@ case "$FIRMWARE" in ;; engenius,ens620ext) caldata_extract "ART" 0x1000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2) ;; linksys,ea8300 |\ linksys,mr8300) @@ -138,7 +138,7 @@ case "$FIRMWARE" in meraki,mr33) caldata_extract_ubi "ART" 0x1000 0x2f20 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20 - ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2) + ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2) ;; mikrotik,hap-ac2) wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" @@ -180,7 +180,7 @@ case "$FIRMWARE" in aruba,ap-303h |\ aruba,ap-365) caldata_extract "ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1) ;; asus,map-ac2200) caldata_extract_ubi "Factory" 0x5000 0x2f20 @@ -233,15 +233,15 @@ case "$FIRMWARE" in ;; engenius,emd1) caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1) ;; engenius,emr3500) caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1) ;; engenius,ens620ext) caldata_extract "ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3) ;; linksys,ea8300 |\ linksys,mr8300) @@ -251,7 +251,7 @@ case "$FIRMWARE" in meraki,mr33) caldata_extract_ubi "ART" 0x5000 0x2f20 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3) + ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3) ;; mikrotik,hap-ac2|\ mikrotik,sxtsq-5-ac) @@ -266,7 +266,7 @@ case "$FIRMWARE" in ;; netgear,wac510) caldata_extract "0:ART" 0x5000 0x2f20 - ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) +16) + ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16) ;; zyxel,nbg6617 |\ zyxel,wre6606) diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh index 0d606c75b5..51ba7071e7 100644 --- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh +++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh @@ -4,8 +4,8 @@ preinit_set_mac_address() { case $(board_name) in asus,map-ac2200) base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006) - ip link set dev eth0 address $(macaddr_add "$base_mac" +1) - ip link set dev eth1 address $(macaddr_add "$base_mac" +3) + ip link set dev eth0 address $(macaddr_add "$base_mac" 1) + ip link set dev eth1 address $(macaddr_add "$base_mac" 3) ;; ezviz,cs-w3-wd1200g-eup) ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6) @@ -13,13 +13,13 @@ preinit_set_mac_address() { ;; engenius,eap2200) base_mac=$(cat /sys/class/net/eth0/address) - ip link set dev eth1 address $(macaddr_add "${base_mac}" +1) + ip link set dev eth1 address $(macaddr_add "$base_mac" 1) ;; linksys,ea8300|\ linksys,mr8300) base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) - ip link set dev eth0 address "${base_mac}" - ip link set dev eth1 address $(macaddr_add "${base_mac}" 1) + ip link set dev eth0 address "$base_mac" + ip link set dev eth1 address $(macaddr_add "$base_mac" 1) ;; meraki,mr33) mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) @@ -27,8 +27,8 @@ preinit_set_mac_address() { ;; zyxel,nbg6617) base_mac=$(cat /sys/class/net/eth0/address) - ip link set dev eth0 address $(macaddr_add "$base_mac" +2) - ip link set dev eth1 address $(macaddr_add "$base_mac" +3) + ip link set dev eth0 address $(macaddr_add "$base_mac" 2) + ip link set dev eth1 address $(macaddr_add "$base_mac" 3) esac } |