aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/patches-5.4
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/ipq40xx/patches-5.4')
-rw-r--r--target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch42
-rw-r--r--target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch (renamed from target/linux/ipq40xx/patches-5.4/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch (renamed from target/linux/ipq40xx/patches-5.4/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch)2
-rw-r--r--target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch71
-rw-r--r--target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch119
-rw-r--r--target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch (renamed from target/linux/ipq40xx/patches-5.4/086-ipq40xx-fix-high-resolution-timer.patch)12
-rw-r--r--target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch57
-rw-r--r--target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch (renamed from target/linux/ipq40xx/patches-5.4/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch (renamed from target/linux/ipq40xx/patches-5.4/040-crypto-qce-switch-to-skcipher-API.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch (renamed from target/linux/ipq40xx/patches-5.4/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch (renamed from target/linux/ipq40xx/patches-5.4/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch (renamed from target/linux/ipq40xx/patches-5.4/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch (renamed from target/linux/ipq40xx/patches-5.4/044-crypto-qce-update-the-skcipher-IV.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch (renamed from target/linux/ipq40xx/patches-5.4/046-crypto-qce-initialize-fallback-only-for-AES.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch (renamed from target/linux/ipq40xx/patches-5.4/051-crypto-qce-allow-building-only-hashes-ciphers.patch)12
-rw-r--r--target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch (renamed from target/linux/ipq40xx/patches-5.4/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch (renamed from target/linux/ipq40xx/patches-5.4/048-crypto-qce-use-AES-fallback-for-small-requests.patch)6
-rw-r--r--target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch (renamed from target/linux/ipq40xx/patches-5.4/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch (renamed from target/linux/ipq40xx/patches-5.4/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch)97
-rw-r--r--target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch (renamed from target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch (renamed from target/linux/ipq40xx/patches-5.4/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch)7
-rw-r--r--target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch38
-rw-r--r--target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch36
-rw-r--r--target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch38
-rw-r--r--target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch70
-rw-r--r--target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch (renamed from target/linux/ipq40xx/patches-5.4/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch (renamed from target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch)54
-rw-r--r--target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch42
-rw-r--r--target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch (renamed from target/linux/ipq40xx/patches-5.4/081-clk-fix-apss-cpu-overclocking.patch)0
-rw-r--r--target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch52
-rw-r--r--target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch2
-rw-r--r--target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch69
-rw-r--r--target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch29
33 files changed, 423 insertions, 432 deletions
diff --git a/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch
new file mode 100644
index 0000000000..8aa71f360f
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/0001-v5.7-ARM-qcom-Add-support-for-IPQ40xx.patch
@@ -0,0 +1,42 @@
+From f125e2d4339dda6937865f975470b29c84714c9b Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 6 Jan 2020 14:57:15 +0100
+Subject: [PATCH] ARM: qcom: Add support for IPQ40xx
+
+Add support for the Qualcomm IPQ40xx SoC in Kconfig.
+Also add its appropriate textofs.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
+Tested-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arm/Makefile | 1 +
+ arch/arm/mach-qcom/Kconfig | 5 +++++
+ 2 files changed, 6 insertions(+)
+
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x001
+ ifeq ($(CONFIG_ARCH_SA1100),y)
+ textofs-$(CONFIG_SA1111) := 0x00208000
+ endif
++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
+ textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
+ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+ textofs-$(CONFIG_ARCH_MESON) := 0x00208000
+--- a/arch/arm/mach-qcom/Kconfig
++++ b/arch/arm/mach-qcom/Kconfig
+@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM
+
+ if ARCH_QCOM
+
++config ARCH_IPQ40XX
++ bool "Enable support for IPQ40XX"
++ select CLKSRC_QCOM
++ select HAVE_ARM_ARCH_TIMER
++
+ config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
diff --git a/target/linux/ipq40xx/patches-5.4/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch b/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch
index aaf8c807ed..aaf8c807ed 100644
--- a/target/linux/ipq40xx/patches-5.4/088-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch
+++ b/target/linux/ipq40xx/patches-5.4/0002-01-v5.6-regulator-add-IPQ4019-SDHCI-VQMMC-LDO-driver.patch
diff --git a/target/linux/ipq40xx/patches-5.4/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch b/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch
index b3e0a20b32..25fce8daf0 100644
--- a/target/linux/ipq40xx/patches-5.4/089-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch
+++ b/target/linux/ipq40xx/patches-5.4/0002-02-v5.5-ARM-dts-qcom-ipq4019-Add-SDHCI-controller-node.patch
@@ -15,7 +15,7 @@ Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -209,6 +209,18 @@
+@@ -206,6 +206,18 @@
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch b/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch
new file mode 100644
index 0000000000..3a4127febf
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/0003-v5.6-ARM-dts-qcom-Add-nodes-for-SMP-boot-in-IPQ40xx.patch
@@ -0,0 +1,71 @@
+From 5e4548922009870a38bcf1d887317676d4e08f54 Mon Sep 17 00:00:00 2001
+From: Damir Franusic <damir.franusic@sartura.hr>
+Date: Thu, 21 Nov 2019 16:29:02 +0100
+Subject: [PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
+
+Add missing nodes and properties to enable SMP
+support on IPQ40xx devices.
+
+Booting without "saw_l2" node:
+
+[ 0.001400] CPU: Testing write buffer coherency: ok
+[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060
+[ 0.080140] rcu: Hierarchical SRCU implementation.
+[ 0.120258] smp: Bringing up secondary CPUs ...
+[ 0.200540] CPU1: failed to boot: -19
+[ 0.280689] CPU2: failed to boot: -19
+[ 0.360874] CPU3: failed to boot: -19
+[ 0.360966] smp: Brought up 1 node, 1 CPU
+[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS).
+[ 0.360988] CPU: All CPU(s) started in SVC mode.
+
+Then, booting with "saw_l2" node present (this patch applied):
+
+[ 0.001450] CPU: Testing write buffer coherency: ok
+[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060
+[ 0.080137] rcu: Hierarchical SRCU implementation.
+[ 0.120252] smp: Bringing up secondary CPUs ...
+[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+[ 0.361430] smp: Brought up 1 node, 4 CPUs
+[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS).
+[ 0.361469] CPU: All CPU(s) started in SVC mode.
+
+Signed-off-by: Damir Franusic <damir.franusic@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Cc: Robert Marko <robert.marko@sartura.hr>
+Cc: Andy Gross <agross@kernel.org>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: linux-arm-msm@vger.kernel.org
+Link: https://lore.kernel.org/r/20191121152902.21394-1-damir.franusic@gmail.com
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -102,6 +102,7 @@
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
+ };
+ };
+
+@@ -353,6 +354,12 @@
+ regulator;
+ };
+
++ saw_l2: regulator@b012000 {
++ compatible = "qcom,saw2";
++ reg = <0xb012000 0x1000>;
++ regulator;
++ };
++
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch
new file mode 100644
index 0000000000..6922bc8ff3
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/0003-v5.7-ARM-dts-qcom-add-gpio-ranges-property.patch
@@ -0,0 +1,119 @@
+From 8b99dc0922618062a1589ebd74df6108b4f9ac22 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Wed, 8 Jan 2020 13:54:55 +0100
+Subject: [PATCH] ARM: dts: qcom: add gpio-ranges property
+
+This patch adds the gpio-ranges property to almost all of
+the Qualcomm ARM platforms that utilize the pinctrl-msm
+framework.
+
+The gpio-ranges property is part of the gpiolib subsystem.
+As a result, the binding text is available in section
+"2.1 gpio- and pin-controller interaction" of
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+For more information please see the patch titled:
+"pinctrl: msm: fix gpio-hog related boot issues" from
+this series.
+
+Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
+Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019]
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+---
+ arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
+ arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
+ arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
+ arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
+ arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
+ arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
+ 8 files changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
+@@ -350,6 +350,7 @@
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
++ gpio-ranges = <&tlmm_pinmux 0 0 90>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
++++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
+@@ -401,6 +401,7 @@
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 147>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -201,6 +201,7 @@
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 100>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -119,6 +119,7 @@
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
++ gpio-ranges = <&qcom_pinmux 0 0 69>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
++++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
+@@ -128,6 +128,7 @@
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,mdm9615-pinctrl";
+ gpio-controller;
++ gpio-ranges = <&msmgpio 0 0 88>;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
++++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
+@@ -115,6 +115,7 @@
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 173>;
+ #gpio-cells = <2>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
++++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
+@@ -107,6 +107,7 @@
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,msm8960-pinctrl";
+ gpio-controller;
++ gpio-ranges = <&msmgpio 0 0 152>;
+ #gpio-cells = <2>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
++++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
+@@ -707,6 +707,7 @@
+ compatible = "qcom,msm8974-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
++ gpio-ranges = <&msmgpio 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
diff --git a/target/linux/ipq40xx/patches-5.4/086-ipq40xx-fix-high-resolution-timer.patch b/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch
index 3bfd0d99e0..f82021f4cd 100644
--- a/target/linux/ipq40xx/patches-5.4/086-ipq40xx-fix-high-resolution-timer.patch
+++ b/target/linux/ipq40xx/patches-5.4/0004-v5.8-ARM-dts-qcom-ipq4019-fix-high-resolution-timer.patch
@@ -1,7 +1,7 @@
-From 09f145f417a5d64d6b8d4476699dfb0eccc6c784 Mon Sep 17 00:00:00 2001
+From 8acc36189dcaf4487d8c6ba7445948f39b1d248a Mon Sep 17 00:00:00 2001
From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Tue, 7 May 2019 10:14:05 +0300
-Subject: [PATCH] ipq40xx: fix high resolution timer
+Date: Fri, 3 Apr 2020 13:40:40 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: fix high resolution timer
Cherry-picked from CAF QSDK repo.
Original commit message:
@@ -10,9 +10,13 @@ mode and clock source operates in 10ms resolution. The always-on
property needs to be given for timer device tree node to make
clock source working in 1ns resolution.
-Change-Id: I7c00b3c74d97c2a30ac9f05e18b511a0550fd459
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Tested-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch b/target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch
new file mode 100644
index 0000000000..1976686e8f
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/0005-v5.8-02-ARM-dts-qcom-ipq4019-add-MDIO-node.patch
@@ -0,0 +1,57 @@
+From 9c8c0f70ec6fdac2398632c723c48277be09b7c0 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Thu, 30 Apr 2020 11:07:07 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: add MDIO node
+
+This patch adds the necessary MDIO interface node
+to the Qualcomm IPQ4019 DTSI.
+
+Built-in QCA8337N switch is managed using it,
+and since we have a driver for it lets add it.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -577,5 +577,33 @@
+ "legacy";
+ status = "disabled";
+ };
++
++ mdio: mdio@90000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "qcom,ipq4019-mdio";
++ reg = <0x90000 0x64>;
++ status = "disabled";
++
++ ethphy0: ethernet-phy@0 {
++ reg = <0>;
++ };
++
++ ethphy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++
++ ethphy2: ethernet-phy@2 {
++ reg = <2>;
++ };
++
++ ethphy3: ethernet-phy@3 {
++ reg = <3>;
++ };
++
++ ethphy4: ethernet-phy@4 {
++ reg = <4>;
++ };
++ };
+ };
+ };
diff --git a/target/linux/ipq40xx/patches-5.4/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch b/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch
index 415d6fff99..415d6fff99 100644
--- a/target/linux/ipq40xx/patches-5.4/039-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch
+++ b/target/linux/ipq40xx/patches-5.4/0006-v5.5-crypto-qce-add-CRYPTO_ALG_KERN_DRIVER_ONLY-flag.patch
diff --git a/target/linux/ipq40xx/patches-5.4/040-crypto-qce-switch-to-skcipher-API.patch b/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch
index 4dcb942150..4dcb942150 100644
--- a/target/linux/ipq40xx/patches-5.4/040-crypto-qce-switch-to-skcipher-API.patch
+++ b/target/linux/ipq40xx/patches-5.4/0007-v5.5-crypto-qce-switch-to-skcipher-API.patch
diff --git a/target/linux/ipq40xx/patches-5.4/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch b/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch
index ac4f163f4a..ac4f163f4a 100644
--- a/target/linux/ipq40xx/patches-5.4/041-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch
+++ b/target/linux/ipq40xx/patches-5.4/0008-v5.6-crypto-qce-fix-ctr-aes-qce-block-chunk-sizes.patch
diff --git a/target/linux/ipq40xx/patches-5.4/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch b/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch
index 4dcf1ac726..4dcf1ac726 100644
--- a/target/linux/ipq40xx/patches-5.4/042-crypto-qce-fix-xts-aes-qce-key-sizes.patch
+++ b/target/linux/ipq40xx/patches-5.4/0009-v5.6-crypto-qce-fix-xts-aes-qce-key-sizes.patch
diff --git a/target/linux/ipq40xx/patches-5.4/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch b/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch
index 2385d483f2..2385d483f2 100644
--- a/target/linux/ipq40xx/patches-5.4/043-crypto-qce-save-a-sg-table-slot-for-result-buf.patch
+++ b/target/linux/ipq40xx/patches-5.4/0010-v5.6-crypto-qce-save-a-sg-table-slot-for-result-buf.patch
diff --git a/target/linux/ipq40xx/patches-5.4/044-crypto-qce-update-the-skcipher-IV.patch b/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch
index 5efdb72c44..5efdb72c44 100644
--- a/target/linux/ipq40xx/patches-5.4/044-crypto-qce-update-the-skcipher-IV.patch
+++ b/target/linux/ipq40xx/patches-5.4/0011-v5.6-crypto-qce-update-the-skcipher-IV.patch
diff --git a/target/linux/ipq40xx/patches-5.4/046-crypto-qce-initialize-fallback-only-for-AES.patch b/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch
index 84aef04ef4..84aef04ef4 100644
--- a/target/linux/ipq40xx/patches-5.4/046-crypto-qce-initialize-fallback-only-for-AES.patch
+++ b/target/linux/ipq40xx/patches-5.4/0012-v5.6-crypto-qce-initialize-fallback-only-for-AES.patch
diff --git a/target/linux/ipq40xx/patches-5.4/051-crypto-qce-allow-building-only-hashes-ciphers.patch b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
index 5f350183d8..bcd5551f54 100644
--- a/target/linux/ipq40xx/patches-5.4/051-crypto-qce-allow-building-only-hashes-ciphers.patch
+++ b/target/linux/ipq40xx/patches-5.4/0013-v5.6-crypto-qce-allow-building-only-hashes-ciphers.patch
@@ -94,8 +94,8 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+
+endchoice
- config CRYPTO_DEV_QCE_SW_MAX_LEN
- int "Default maximum request size to use software for AES"
+ config CRYPTO_DEV_QCOM_RNG
+ tristate "Qualcomm Random Number Generator Driver"
--- a/drivers/crypto/qce/Makefile
+++ b/drivers/crypto/qce/Makefile
@@ -2,6 +2,7 @@
@@ -111,7 +111,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
--- a/drivers/crypto/qce/common.c
+++ b/drivers/crypto/qce/common.c
-@@ -43,52 +43,56 @@ qce_clear_array(struct qce_device *qce,
+@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce,
qce_write(qce, offset + i * sizeof(u32), 0);
}
@@ -204,7 +204,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
{
u32 cfg = 0;
-@@ -135,88 +139,6 @@ static u32 qce_auth_cfg(unsigned long fl
+@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl
return cfg;
}
@@ -293,7 +293,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
{
-@@ -301,6 +223,87 @@ go_proc:
+@@ -303,6 +225,87 @@ go_proc:
return 0;
}
@@ -381,7 +381,7 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
u32 totallen, u32 offset)
-@@ -382,15 +385,20 @@ static int qce_setup_regs_skcipher(struc
+@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc
return 0;
}
diff --git a/target/linux/ipq40xx/patches-5.4/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch b/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch
index 160420b485..160420b485 100644
--- a/target/linux/ipq40xx/patches-5.4/047-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch
+++ b/target/linux/ipq40xx/patches-5.4/0014-v5.7-crypto-qce-use-cryptlen-when-adding-extra-sgl.patch
diff --git a/target/linux/ipq40xx/patches-5.4/048-crypto-qce-use-AES-fallback-for-small-requests.patch b/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch
index d9a6c4dff9..55d15f56b5 100644
--- a/target/linux/ipq40xx/patches-5.4/048-crypto-qce-use-AES-fallback-for-small-requests.patch
+++ b/target/linux/ipq40xx/patches-5.4/0015-v5.7-crypto-qce-use-AES-fallback-for-small-requests.patch
@@ -28,9 +28,9 @@ Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
-@@ -628,6 +628,29 @@ config CRYPTO_DEV_QCE
- hardware. To compile this driver as a module, choose M here. The
- module will be called qcrypto.
+@@ -683,6 +683,29 @@ choice
+
+ endchoice
+config CRYPTO_DEV_QCE_SW_MAX_LEN
+ int "Default maximum request size to use software for AES"
diff --git a/target/linux/ipq40xx/patches-5.4/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch b/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch
index 18beda6296..18beda6296 100644
--- a/target/linux/ipq40xx/patches-5.4/049-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch
+++ b/target/linux/ipq40xx/patches-5.4/0016-v5.7-crypto-qce-handle-AES-XTS-cases-that-qce-fails.patch
diff --git a/target/linux/ipq40xx/patches-5.4/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch b/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch
index 6ded0e9bad..ad09a9f250 100644
--- a/target/linux/ipq40xx/patches-5.4/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
+++ b/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch
@@ -1,18 +1,21 @@
-From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 14:45:49 +0200
-Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
+From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Sun, 3 May 2020 22:18:22 +0200
+Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY
-Add a driver to setup the USB phy on Qualcom Dakota SoCs.
-The driver sets up HS and SS phys. In case of HS some magic values need to
-be written to magic offsets. These were taken from the SDK driver.
+Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs.
+The driver sets up HS and SS phys.
Signed-off-by: John Crispin <john@phrozen.org>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
- drivers/phy/qualcomm/Kconfig | 7 ++
+ drivers/phy/qualcomm/Kconfig | 7 +
drivers/phy/qualcomm/Makefile | 1 +
- drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++
- 3 files changed, 196 insertions(+)
+ drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++
+ 3 files changed, 156 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
--- a/drivers/phy/qualcomm/Kconfig
@@ -22,33 +25,35 @@ Signed-off-by: John Crispin <john@phrozen.org>
select GENERIC_PHY
+config PHY_QCOM_IPQ4019_USB
-+ tristate "Qualcomm IPQ4019 USB PHY module"
-+ depends on OF && ARCH_QCOM
++ tristate "Qualcomm IPQ4019 USB PHY driver"
++ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
-+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets.
++ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
+
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
+--- a/drivers/phy/qualcomm/Makefile
++++ b/drivers/phy/qualcomm/Makefile
+@@ -1,6 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
+ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
++obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
+ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+ obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
+ obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-@@ -0,0 +1,188 @@
+@@ -0,0 +1,148 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
@@ -58,29 +63,11 @@ Signed-off-by: John Crispin <john@phrozen.org>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
++#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
-+/*
-+ * Magic registers copied from the SDK driver code
-+ */
-+#define PHY_CTRL0_ADDR 0x000
-+#define PHY_CTRL1_ADDR 0x004
-+#define PHY_CTRL2_ADDR 0x008
-+#define PHY_CTRL3_ADDR 0x00C
-+#define PHY_CTRL4_ADDR 0x010
-+#define PHY_MISC_ADDR 0x024
-+#define PHY_IPG_ADDR 0x030
-+
-+#define PHY_CTRL0_VAL 0xA4600015
-+#define PHY_CTRL1_VAL 0x09500000
-+#define PHY_CTRL2_VAL 0x00058180
-+#define PHY_CTRL3_VAL 0x6DB6DCD6
-+#define PHY_CTRL4_VAL 0x836DB6DB
-+#define PHY_MISC_VAL 0x3803FB0C
-+#define PHY_IPG_VAL 0x47323232
-+
+struct ipq4019_usb_phy {
+ struct device *dev;
+ struct phy *phy;
@@ -137,15 +124,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ reset_control_deassert(phy->srif_rst);
+ msleep(10);
+
-+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
-+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
-+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
-+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
-+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
-+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
-+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
-+ msleep(10);
-+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
@@ -169,11 +147,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct ipq4019_usb_phy *phy;
-+ const struct of_device_id *match;
-+
-+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
@@ -198,7 +171,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ if (IS_ERR(phy->srif_rst))
+ return PTR_ERR(phy->srif_rst);
+
-+ phy->phy = devm_phy_create(dev, NULL, match->data);
++ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev));
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy->phy);
@@ -222,13 +195,3 @@ Signed-off-by: John Crispin <john@phrozen.org>
+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
- obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
- obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
- obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
- obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
diff --git a/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch b/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch
index 5cd4ccc30f..5cd4ccc30f 100644
--- a/target/linux/ipq40xx/patches-5.4/090-pinctrl-msm-open-drain.patch
+++ b/target/linux/ipq40xx/patches-5.4/0018-v5.9-pinctrl-msm-open-drain.patch
diff --git a/target/linux/ipq40xx/patches-5.4/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch b/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch
index e0078b7260..97433b030e 100644
--- a/target/linux/ipq40xx/patches-5.4/304-mtd-spi-nor-Add-support-for-mx25r3235f.patch
+++ b/target/linux/ipq40xx/patches-5.4/0019-v5.6-mtd-spi-nor-Add-support-for-mx25r3235f.patch
@@ -1,6 +1,6 @@
-From 158acdbf0336f601971637f988b57a6a67a0869b Mon Sep 17 00:00:00 2001
+From 707745e8d4e75b638b990d67950ab292b3b8ea2a Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
-Date: Sun, 15 Dec 2019 13:10:50 +0100
+Date: Mon, 16 Dec 2019 01:36:46 +0100
Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f
Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix.
@@ -8,7 +8,10 @@ The chip has 4MB of total capacity, divided into a total of 64 sectors,
each 64KB sized. The chip also supports 4KB large sectors.
Additionally, it supports dual and quad read modes.
+Functionality was verified on an HPE/Aruba AP-303 board.
+
Signed-off-by: David Bauer <mail@david-bauer.net>
+Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
drivers/mtd/spi-nor/spi-nor.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch b/target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch
deleted file mode 100644
index 631a1307dd..0000000000
--- a/target/linux/ipq40xx/patches-5.4/071-02-ipq40xx-Fix-booting-secondary-cores.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 8a4540321e8bcf7a5b485c332a2e78f3501c78ed Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 29 Nov 2018 22:29:36 +0100
-Subject: [PATCH] ipq40xx: Fix booting secondary cores
-
-Add the second part of old 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
-We dont modify the patch itself as its upstream and this change is not.
-
-Originally added by Mantas Pucka Mantas Pucka <mantas@8devices.com>
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -102,6 +102,7 @@
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
- };
- };
-
-@@ -341,6 +342,12 @@
- regulator;
- };
-
-+ saw_l2: regulator@b012000 {
-+ compatible = "qcom,saw2";
-+ reg = <0xb012000 0x1000>;
-+ regulator;
-+ };
-+
- blsp1_uart1: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
diff --git a/target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
deleted file mode 100644
index 16ac94fd37..0000000000
--- a/target/linux/ipq40xx/patches-5.4/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 22 Jul 2018 12:07:57 +0200
-Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support
-
-Add support for the Qualcomm Atheros IPQ4019 SoC.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/Makefile | 1 +
- arch/arm/mach-qcom/Kconfig | 5 +++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -156,6 +156,7 @@ textofs-$(CONFIG_ARCH_MSM8X60) := 0x0020
- textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
- textofs-$(CONFIG_ARCH_MESON) := 0x00208000
- textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
-+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
-
- # Machine directory name. This list is sorted alphanumerically
- # by CONFIG_* macro name.
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -28,4 +28,9 @@ config ARCH_MDM9615
- bool "Enable support for MDM9615"
- select CLKSRC_QCOM
-
-+config ARCH_IPQ40XX
-+ bool "Enable support for IPQ40XX"
-+ select CLKSRC_QCOM
-+ select HAVE_ARM_ARCH_TIMER
-+
- endif
diff --git a/target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
deleted file mode 100644
index e7407bcbab..0000000000
--- a/target/linux/ipq40xx/patches-5.4/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 15:09:36 +0200
-Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
-
-This patch adds the binding documentation for the HS/SS USB PHY found
-inside Qualcom Dakota SoCs.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-@@ -0,0 +1,21 @@
-+Qualcom Dakota HS/SS USB PHY
-+
-+Required properties:
-+ - compatible: "qcom,usb-ss-ipq4019-phy",
-+ "qcom,usb-hs-ipq4019-phy"
-+ - reg: offset and length of the registers
-+ - #phy-cells: should be 0
-+ - resets: the reset controllers as listed below
-+ - reset-names: the names of the reset controllers
-+ "por_rst" - the POR reset line for SS and HS phys
-+ "srif_rst" - the SRIF reset line for HS phys
-+Example:
-+
-+hsphy@a8000 {
-+ compatible = "qcom,usb-hs-ipq4019-phy";
-+ phy-cells = <0>;
-+ reg = <0xa8000 0x40>;
-+ resets = <&gcc USB2_HSPHY_POR_ARES>,
-+ <&gcc USB2_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+};
diff --git a/target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch b/target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch
deleted file mode 100644
index 972bdb7497..0000000000
--- a/target/linux/ipq40xx/patches-5.4/080-ARM-dts-qcom-add-gpio-ranges-property.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From patchwork Mon May 21 20:57:38 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property
-X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com>
-X-Patchwork-Id: 917856
-Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com>
-To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
-Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
- Linus Walleij <linus.walleij@linaro.org>,
- Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>,
- Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Andy Gross <andy.gross@linaro.org>,
- Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Mon, 21 May 2018 22:57:38 +0200
-From: Christian Lamparter <chunkeey@gmail.com>
-List-Id: <linux-gpio.vger.kernel.org>
-
-This patch adds the gpio-ranges property to almost all of
-the Qualcomm ARM platforms that utilize the pinctrl-msm
-framework.
-
-The gpio-ranges property is part of the gpiolib subsystem.
-As a result, the binding text is available in section
-"2.1 gpio- and pin-controller interaction" of
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-For more information please see the patch titled:
-"pinctrl: msm: fix gpio-hog related boot issues" from
-this series.
-
-Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
----
-To help with git bisect, the DT update patch has been intentionally
-placed after the "pinctrl: msm: fix gpio-hog related boot issues".
-Otherwise - if the order was reveresed - and bisect decides to split
-between these two patches, the gpiochip_add_pin_ranges() function
-will be executed twice with the same parameters for the same pinctrl.
----
- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
- arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
- 13 files changed, 14 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -201,6 +201,7 @@
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x01000000 0x300000>;
- gpio-controller;
-+ gpio-ranges = <&tlmm 0 0 100>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
diff --git a/target/linux/ipq40xx/patches-5.4/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch
index 14affc28c1..14affc28c1 100644
--- a/target/linux/ipq40xx/patches-5.4/100-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch
+++ b/target/linux/ipq40xx/patches-5.4/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch
diff --git a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch
index 5efc08bcca..b033a1baee 100644
--- a/target/linux/ipq40xx/patches-5.4/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
+++ b/target/linux/ipq40xx/patches-5.4/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch
@@ -1,49 +1,23 @@
-From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
+From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 14:47:55 +0200
-Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
+Date: Wed, 9 Sep 2020 18:31:03 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes
-This patch makes USB work on the Dakota EVB.
+Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI.
Signed-off-by: John Crispin <john@phrozen.org>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++
- 2 files changed, 94 insertions(+)
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++
+ 1 file changed, 74 insertions(+)
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -109,5 +109,25 @@
- wifi@a800000 {
- status = "ok";
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "okay";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "okay";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ status = "okay";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "okay";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ status = "okay";
-+ };
- };
- };
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -563,5 +563,79 @@
- "legacy";
- status = "disabled";
+@@ -615,5 +615,79 @@
+ reg = <4>;
+ };
};
+
+ usb3_ss_phy: ssphy@9a000 {
@@ -66,7 +40,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ status = "disabled";
+ };
+
-+ usb3@8af8800 {
++ usb3: usb3@8af8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x8af8800 0x100>;
+ #address-cells = <1>;
@@ -98,7 +72,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ status = "disabled";
+ };
+
-+ usb2@60f8800 {
++ usb2: usb2@60f8800 {
+ compatible = "qcom,dwc3";
+ reg = <0x60f8800 0x100>;
+ #address-cells = <1>;
diff --git a/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch
new file mode 100644
index 0000000000..0e215ee7cf
--- /dev/null
+++ b/target/linux/ipq40xx/patches-5.4/103-arm-dts-qcom-ipq4019-add-more-labels.patch
@@ -0,0 +1,42 @@
+From caa3ee6b094ee18021943504c938919fcac325ec Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Wed, 9 Sep 2020 20:40:33 +0200
+Subject: [PATCH] arm: dts: qcom: ipq4019: add more labels
+
+Lets add labels to more commonly used nodes for easier modification in board DTS files.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -190,7 +190,7 @@
+ reg = <0x1800000 0x60000>;
+ };
+
+- rng@22000 {
++ prng: rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x22000 0x140>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+@@ -310,7 +310,7 @@
+ status = "disabled";
+ };
+
+- crypto@8e3a000 {
++ crypto: crypto@8e3a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0x08e3a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+@@ -396,7 +396,7 @@
+ dma-names = "rx", "tx";
+ };
+
+- watchdog@b017000 {
++ watchdog: watchdog@b017000 {
+ compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
+ reg = <0xb017000 0x40>;
+ clocks = <&sleep_clk>;
diff --git a/target/linux/ipq40xx/patches-5.4/081-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch
index 25a2020bd2..25a2020bd2 100644
--- a/target/linux/ipq40xx/patches-5.4/081-clk-fix-apss-cpu-overclocking.patch
+++ b/target/linux/ipq40xx/patches-5.4/104-clk-fix-apss-cpu-overclocking.patch
diff --git a/target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch
deleted file mode 100644
index b0a69433b1..0000000000
--- a/target/linux/ipq40xx/patches-5.4/701-dts-ipq4019-add-mdio-node.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:10:33 +0100
-Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
-
-This patch adds the mdio device-tree node.
-This is where the switch is connected to, so it's needed
-for the ethernet interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -588,6 +588,34 @@
- status = "disabled";
- };
-
-+ mdio: mdio@90000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "qcom,ipq4019-mdio";
-+ reg = <0x90000 0x64>;
-+ status = "disabled";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+
-+ ethphy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+
-+ ethphy2: ethernet-phy@2 {
-+ reg = <2>;
-+ };
-+
-+ ethphy3: ethernet-phy@3 {
-+ reg = <3>;
-+ };
-+
-+ ethphy4: ethernet-phy@4 {
-+ reg = <4>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch
index a90ae0eb89..4cdeab637a 100644
--- a/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch
+++ b/target/linux/ipq40xx/patches-5.4/705-net-add-qualcomm-ar40xx-phy.patch
@@ -8,7 +8,7 @@
+ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
+ depends on HAS_IOMEM && OF
+ select SWCONFIG
-+ ---help---
++ help
+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
+
endif # PHYLIB
diff --git a/target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch b/target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch
deleted file mode 100644
index 6424dd5243..0000000000
--- a/target/linux/ipq40xx/patches-5.4/721-dts-ipq4019-add-ethernet-essedma-node.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet ipqess node
-
-This patch adds the device-tree node for the ipqess ethernet
-interfaces.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -699,6 +699,53 @@
- };
- };
-
-+ gmac: ethernet@c080000 {
-+ compatible = "qcom,ipq4019-ess-edma";
-+ reg = <0xc080000 0x8000>;
-+ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
-+
-+ status = "disabled";
-+
-+ phy-mode = "internal";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ asym-pause;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
diff --git a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch
index 5157079762..5a245eb431 100644
--- a/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch
+++ b/target/linux/ipq40xx/patches-5.4/900-dts-ipq4019-ap-dk01.1.patch
@@ -56,10 +56,11 @@
};
serial@78af000 {
-@@ -110,6 +129,22 @@
+@@ -109,5 +128,41 @@
+ wifi@a800000 {
status = "ok";
};
-
++
+ mdio@90000 {
+ status = "okay";
+ };
@@ -76,9 +77,27 @@
+ status = "okay";
+ };
+
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
++ usb3_ss_phy: ssphy@9a000 {
++ status = "okay";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ status = "okay";
++ };
++
++ usb3: usb3@8af8800 {
++ status = "okay";
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ status = "okay";
++ };
++
++ usb2: usb2@60f8800 {
++ status = "okay";
++ };
+ };
+ };
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,73 @@