1 files changed, 7 insertions, 173 deletions

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts
index 6c285f4b8a..db8c8c9ad0 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-mf287plus.dts
@@ -3,31 +3,12 @@
 // Copyright (c) 2022, Giammarco Marzano <stich86@gmail.com>.
 // Copyright (c) 2023, Andreas Böhler <dev@aboehler.at>
 
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/soc/qcom,tcsr.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "qcom-ipq4018-mf287.dtsi"
 
 / {
 	model = "ZTE MF287Plus";
 	compatible = "zte,mf287plus";
 
-	aliases {
-		led-boot = &led_status;
-		led-failsafe = &led_status;
-		led-running = &led_status;
-		led-upgrade = &led_status;
-	};
-
-	chosen {
-		/*
-		 * bootargs forced by u-boot bootipq command:
-		 * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
-		 */
-		bootargs-append = " root=/dev/ubiblock0_1";
-	};
-
 	/*
 	 * This node is used to restart modem module to avoid anomalous
 	 * behaviours on initial communication.
@@ -36,85 +17,18 @@
 		compatible = "gpio-restart";
 		gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
 	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_status: led-0 {
-			label = "blue:power";
-			function = LED_FUNCTION_POWER;
-			color = <LED_COLOR_ID_BLUE>;
-			gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		key-reset {
-			label = "reset";
-			linux,code = <KEY_RESTART>;
-			gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
-		};
-
-		key-wps {
-			label = "wps";
-			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-	};
 };
 
-&mdio {
-	status = "okay";
+&key_reset {
+	gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 };
 
-&watchdog {
-	status = "okay";
+&key_wps {
+	gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 };
 
-&blsp_dma {
-	status = "okay";
-};
-
-&usb2 {
-	status = "okay";
-};
-
-&usb3 {
-	status = "okay";
+&led_status {
+	gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 };
 
 &blsp1_spi1 {
@@ -276,59 +190,6 @@
 	};
 };
 
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&crypto {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&gmac {
-	status = "okay";
-	nvmem-cell-names = "mac-address";
-	nvmem-cells = <&macaddr_mac_0>;
-	mac-address-increment = <2>;
-};
-
-&switch {
-	status = "okay";
-};
-
-&swport2 {
-	status = "okay";
-
-	label = "lan1";
-};
-
-&swport3 {
-	status = "okay";
-
-	label = "lan2";
-};
-
-&swport4 {
-	status = "okay";
-
-	label = "lan3";
-};
-
-&swport5 {
-	status = "okay";
-
-	label = "lan4";
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
 &tlmm {
 	serial_pins: serial_pinmux {
 		mux {
@@ -355,30 +216,3 @@
 		};
 	};
 };
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	nvmem-cell-names = "pre-calibration", "mac-address";
-	nvmem-cells = <&precal_art_1000>, <&macaddr_mac_0>;
-	qcom,ath10k-calibration-variant = "zte,mf287plus";
-};
-
-&wifi1 {
-	status = "okay";
-	nvmem-cell-names = "pre-calibration", "mac-address";
-	nvmem-cells = <&precal_art_5000>, <&macaddr_mac_0>;
-	mac-address-increment = <1>;
-	qcom,ath10k-calibration-variant = "zte,mf287plus";
-};