1 files changed, 0 insertions, 193 deletions
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
deleted file mode 100644
index 07bb674520..0000000000
--- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-
-#include "qcom-ipq4029-aruba-glenmorangie.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Aruba AP-365";
-	compatible = "aruba,ap-365";
-
-	aliases {
-		led-boot = &led_system_green;
-		led-failsafe = &led_system_red;
-		led-running = &led_system_green;
-		led-upgrade = &led_system_red;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led_system_red: system_red {
-			label = "ap-365:red:system";
-			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
-		};
-
-		led_system_green: system_green {
-			label = "ap-365:green:system";
-			gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
-		};
-
-		system_amber {
-			label = "ap-365:amber:system";
-			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
-		};
-	};
-
-	watchdog {
-		compatible = "linux,wdt-gpio";
-		gpios = <&tlmm 41 GPIO_ACTIVE_LOW>;
-		hw_algo = "toggle";
-		hw_margin_ms = <1000>;
-		always-running;
-	};
-};
-
-&tlmm {
-	/*
-	 * In addition to the Pins listed below,
-	 * the following GPIOs have "features":
-	 * 39 - out - pulse low to reset watchdog status flipflop
-	 * 40 - out - active high to enable watchdog
-	 * 41 - out - watchdog poke
-	 * 42 - out - active low to reset BLE radio
-	 * 43 - out - active low to reset TPM
-	 * 47 - out - pulse low to reset warm reset status
-	 * 54 - out - active low to force HW reset
-	 * 18 - in  - PHY interrupt line
-	 * 45 - in  - power monitor interrupt
-	 * 48 - in  - active low when cold reset
-	 * 52 - in  - active high when watchdog reset
-	 */
-
-	phy-reset {
-		line-name = "PHY-reset";
-		gpios = <42 GPIO_ACTIVE_HIGH>;
-		gpio-hog;
-		output-high;
-	};
-};
-
-&i2c_0 {
-	power-monitor@40 {
-		/* No driver */
-		compatible = "isl,isl28022";
-		reg = <0x40>;
-	};
-
-	temperature-sensor@48 {
-		compatible = "adi,ad7416";
-		reg = <0x48>;
-	};
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			/*
-			 * There is no partition map for the NOR flash
-			 * in the stock firmware.
-			 *
-			 * All partitions here are based on offsets
-			 * found in the U-Boot GPL code and information
-			 * from smem.
-			 */
-
-			partition@0 {
-				label = "sbl1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "mibib";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "qsee";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "cdt";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "ddrparams";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "u-boot-env";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "appsbl";
-				reg = <0xf0000 0x100000>;
-				read-only;
-			};
-
-			partition@1f0000 {
-				label = "ART";
-				reg = <0x1f0000 0x10000>;
-				read-only;
-			};
-
-			partition@200000 {
-				label = "osss";
-				reg = <0x200000 0x170000>;
-				read-only;
-			};
-
-			partition@370000 {
-				label = "pds";
-				reg = <0x370000 0x10000>;
-				read-only;
-			};
-
-			partition@380000 {
-				label = "apcd";
-				reg = <0x380000 0x10000>;
-				read-only;
-			};
-
-			partition@390000 {
-				label = "mfginfo";
-				reg = <0x390000 0x10000>;
-				read-only;
-			};
-
-			partition@3a0000 {
-				label = "fcache";
-				reg = <0x3a0000 0x10000>;
-				read-only;
-			};
-
-			partition@3b0000 {
-				label = "osss1";
-				reg = <0x3b0000 0x50000>;
-				read-only;
-			};
-		};
-	};
-};