diff options
Diffstat (limited to 'target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts')
-rw-r--r-- | target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts | 193 |
1 files changed, 0 insertions, 193 deletions
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts deleted file mode 100644 index 07bb674520..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts +++ /dev/null @@ -1,193 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Aruba AP-365"; - compatible = "aruba,ap-365"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - led_system_red: system_red { - label = "ap-365:red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - }; - - led_system_green: system_green { - label = "ap-365:green:system"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - }; - - system_amber { - label = "ap-365:amber:system"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <1000>; - always-running; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - pulse low to reset watchdog status flipflop - * 40 - out - active high to enable watchdog - * 41 - out - watchdog poke - * 42 - out - active low to reset BLE radio - * 43 - out - active low to reset TPM - * 47 - out - pulse low to reset warm reset status - * 54 - out - active low to force HW reset - * 18 - in - PHY interrupt line - * 45 - in - power monitor interrupt - * 48 - in - active low when cold reset - * 52 - in - active high when watchdog reset - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&i2c_0 { - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - - temperature-sensor@48 { - compatible = "adi,ad7416"; - reg = <0x48>; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1f0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@370000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - label = "osss1"; - reg = <0x3b0000 0x50000>; - read-only; - }; - }; - }; -}; |