diff options
Diffstat (limited to 'target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts')
| -rw-r--r-- | target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts | 241 |
1 files changed, 0 insertions, 241 deletions
diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts deleted file mode 100644 index 17d9215544..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/soc/qcom,tcsr.h> - -/ { - model = "D-Link DAP 2610"; - compatible = "dlink,dap-2610"; - - aliases { - led-boot = &led_red; - led-failsafe = &led_red; - led-running = &led_green; - led-upgrade = &led_red; - }; - - soc { - edma@c080000 { - qcom,num_gmac = <1>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = <TCSR_ESS_PSGMII>; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>; - }; - - rng@22000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_red: red { - label = "dap-2610:red:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - }; - - led_green: green { - label = "dap-2610:green:power"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = <KEY_RESTART>; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fixed-partitions"; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "wrg"; - label = "firmware"; - reg = <0x180000 0xdc0000>; - }; - partition@fb0000 { - label = "rgbd"; - reg = <0xfb0000 0x10000>; - read-only; - }; - partition@fc0000 { - label = "bdcfg"; - reg = <0xfc0000 0x10000>; - read-only; - }; - partition@fd0000 { - label = "langpack"; - reg = <0xfd0000 0x20000>; - read-only; - }; - partition@ff0000 { - label = "certificate"; - reg = <0xff0000 0x10000>; - read-only; - }; - partition@f40000 { - label = "captival"; - reg = <0xf40000 0x70000>; - read-only; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - -&mdio { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; |