diff options
Diffstat (limited to 'target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi')
-rw-r--r-- | target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 547 |
1 files changed, 0 insertions, 547 deletions
diff --git a/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi deleted file mode 100644 index 01f9afb195..0000000000 --- a/target/linux/imx6/files-4.4/arch/arm/boot/dts/imx6qdl-gw553x.dtsi +++ /dev/null @@ -1,547 +0,0 @@ -/* - * Copyright 2016 Gateworks Corporation - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/gpio/gpio.h> - -/ { - /* these are used by bootloader for disabling nodes */ - aliases { - led0 = &led0; - led1 = &led1; - nand = &gpmi; - usb0 = &usbh1; - usb1 = &usbotg; - }; - - chosen { - bootargs = "console=ttymxc1,115200"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_leds>; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ - default-state = "off"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - user_pb { - label = "user_pb"; - - gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; - linux,code = <256>; - }; - }; - - memory { - reg = <0x10000000 0x20000000>; - }; - - pps { - compatible = "pps-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pps>; - gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P0V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_5p0v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - }; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - status = "okay"; -}; - -&hdmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hdmi>; - ddc-i2c-bus = <&i2c3>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gsc: gsc@20 { - compatible = "gw,gsc"; - reg = <0x20>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gsc>; - interrupt-parent = <&gpio1>; - interrupts = <4 GPIO_ACTIVE_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - /* GSC watchdog */ - watchdog { - compatible = "gw,gsc_wdt"; - status = "okay"; - }; - - /* Linux input events from GSC interrupt events */ - input { - compatible = "gw,gsc_input"; - interrupt-parent = <&gsc>; - interrupts = <0 1 2 5 7>; - interrupt-names = "button", "key-erased", "eeprom-wp", "tamper", "button-held"; - status = "okay"; - }; - }; - - gsc_gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - interrupt-parent = <&gsc>; - interrupts = <4>; - }; - - gsc_hwmon: hwmon@29 { - compatible = "gw,gsc_hwmon"; - reg = <0x29>; - }; - - gsc_rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - status = "okay"; - - /* LSM9DS1 magnetic sensor */ - lsm9ds1-m@0x1c { - compatible = "st,lsm9ds1-mag"; - reg = <0x1C>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_imu_mag>; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* IRQ */ - rot-matrix = /bits/ 16 <(1) (0) (0) - (0) (1) (0) - (0) (0) (1)>; - poll-interval = <100>; - min-interval = <13>; - fs-range = <0>; - }; - - /* LSM9DS1 accelerometer/gyroscope sensor */ - lsm9ds1-ag@0x6a { - compatible = "st,lsm9ds1-acc-gyr"; - reg = <0x6A>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_imu_acc>; - gpios = <&gpio7 13 GPIO_ACTIVE_LOW>, /* INT1 */ - <&gpio4 5 GPIO_ACTIVE_LOW>; /* INT2 */ - rot-matrix = /bits/ 16 <(1) (0) (0) - (0) (1) (0) - (0) (0) (1)>; - g-poll-interval = <100>; - g-min-interval = <2>; - g-fs-range = <0>; - x-poll-interval = <100>; - x-min-interval = <1>; - x-fs-range = <0>; - aa-filter-bw = <0>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; -}; - -&pcie { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pwm2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ - status = "disabled"; -}; - -&pwm3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ - status = "disabled"; -}; - -&pwm4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */ - status = "disabled"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - status = "okay"; -}; - -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart4>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5>; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg>; - disable-over-current; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default", "state_100mhz", "state_200mhz"; - pinctrl-0 = <&pinctrl_usdhc3>; - pinctrl-1 = <&pinctrl_usdhc3_100mhz>; - pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - vmmc-supply = <®_3p3v>; - no-1-8-v; /* firmware will remove if board revision supports */ - status = "okay"; -}; - -&wdog1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_wdog>; - fsl,ext-reset-output; -}; - -&iomuxc { - imx6qdl-gw553x { - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - >; - }; - - pinctrl_gsc: gscgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0 - >; - }; - - pinctrl_hdmi: hdmigrp { - fsl,pins = < - MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0 - >; - }; - - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 - >; - }; - - pinctrl_imu_mag: gpioimxmaggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* IRQ */ - MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* data ready */ - >; - }; - - pinctrl_imu_acc: gpioimxaccgrp { - fsl,pins = < - MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* INT1 */ - MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* INT2 */ - MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* Data enable */ - >; - }; - - pinctrl_gpio_leds: gpioledsgrp { - fsl,pins = < - MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 - MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 - >; - }; - - pinctrl_pcie: pciegrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 - MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b0 /* PCIESKT_WDIS# */ - >; - }; - - pinctrl_pps: ppsgrp { - fsl,pins = < - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 - >; - }; - - pinctrl_pwm2: pwm2grp { - fsl,pins = < - MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 - >; - }; - - pinctrl_pwm3: pwm3grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 - >; - }; - - pinctrl_pwm4: pwm4grp { - fsl,pins = < - MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart3: uart3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_uart5: uart5grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 - >; - }; - - pinctrl_usbotg: usbotggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */ - >; - }; - - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059 - >; - }; - - pinctrl_usdhc3_100mhz: usdhc3grp100mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3grp200mhz { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */ - MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9 - >; - }; - - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 - >; - }; - }; -}; |