diff options
Diffstat (limited to 'target/linux/ifxmips/files')
8 files changed, 6410 insertions, 0 deletions
diff --git a/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c b/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c new file mode 100644 index 0000000000..4d14b8947b --- /dev/null +++ b/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c @@ -0,0 +1,3658 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_core.c +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment + 1.00.01 TC Chen Fixed cell rate calculation issue + Fixed pvovider_id of adsl mib swapping issue + 1.00.02 TC Chen Added L3 Low Poewr Mode support. + 1.00.03 TC Chen Fixed Clear Eoc transmit issue. + 1.00.04 31/08/2006 TC Chen Add ADSL Link/Data Led + Add Dual Latency Path + Add AUTOBOOT_ENABLE_SET ioctl for autoboot + mode enable/disable + Fix fast path cell rate calculation + 1.00.05 25/09/2006 TC Chen Fix ATM QoS fail on interface 0(fast path). + 1.00.06 02/10/2006 TC Chen Change ifxmips_ppe_set_cell_rate to + ifx_atm_set_cell_rate + Add ATM Led callback function + 1.00.07 13/11/2006 TC Chen Invert ADSL Link LED Signal + 1.00.08 08/12/2006 TC Chen Fix loop diagnostic warning message issue + 1.00.09 20/12/2006 TC Chen Workaround for USB OC interrupt which is trigegred once DSL reset +******************************************************************************/ + +/* + * =========================================================================== + * INCLUDE FILES + * =========================================================================== + */ + +#include <asm/ifxmips/ifxmips_mei_linux.h> + +char IFXMIPS_MEI_VERSION[] = "1.00.09"; + +#define IFXMIPS_MEI_CMV_EXTRA //WINHOST debug +#define IFX_ADSL_L3_MODE_SUPPORT //L3 Low Power Mode Support +#define IFX_ADSL_DUAL_LATENCY_SUPPORT +#undef IFXMIPS_CLEAR_EOC //clear eoc support + +// for ARC memory access +#define WHILE_DELAY 20000 +#if defined(IFXMIPS_PORT_RTEMS) +#undef IFXMIPS_DMA_DEBUG_MUTEX +#else +#define IFXMIPS_DMA_DEBUG_MUTEX +#endif + +#define IMAGE_SWAP +#define BOOT_SWAP +#define HEADER_SWAP + +//TODO +#undef DFE_LOOPBACK // testing code //undefined by Henry , start to real link test. + //165203:henryhsu + +#ifdef DFE_LOOPBACK +//#define DFE_MEM_TEST +//#define DFE_PING_TEST +#define DFE_ATM_LOOPBACK +#endif + +#undef DATA_LED_ON_MODE +#define DATA_LED_SUPPORT // support adsl data led +//#define DATA_LED_ADSL_FW_HANDLE // adsl data led handle by firmware +#define CONFIG_IFXMIPS_MEI_LED // adsl led support + +// Block size per BAR +#define SDRAM_SEGMENT_SIZE (64*1024) +// Number of Bar registers +#define MAX_BAR_REGISTERS (17) + +#define XDATA_REGISTER (15) + +#define IFXMIPS_MEI_DEVNAME "mei" + +#ifdef DFE_LOOPBACK +#ifndef UINT32 +#define UINT32 unsigned long +#endif +#ifdef DFE_PING_TEST +#include "dsp_xmem_arb_rand_em.h" +#endif +#ifdef DFE_MEM_TEST +#include "aai_mem_test.h" +#endif +#ifdef DFE_ATM_LOOPBACK +#include "aai_lpbk_dyn_rate.h" +#endif +#endif + +/************************************************************************ + * Function declaration + ************************************************************************/ +static MEI_ERROR meiDMAWrite (u32 destaddr, u32 * databuff, u32 databuffsize); +static MEI_ERROR meiDMARead (u32 srcaddr, u32 * databuff, u32 databuffsize); +static void meiControlModeSwitch (int mode); +static void meiPollForDbgDone (void); +static MEI_ERROR _meiDebugLongWordRead (u32 DEC_mode, u32 address, + u32 * data); +static MEI_ERROR _meiDebugLongWordWrite (u32 DEC_mode, u32 address, u32 data); +MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize); +static MEI_ERROR meiDebugRead (u32 srcaddr, u32 * databuff, u32 databuffsize); +static MEI_ERROR meiMailboxWrite (u16 * msgsrcbuffer, u16 msgsize); +static MEI_ERROR meiDownloadBootCode (void); +static MEI_ERROR meiHaltArc (void); +static MEI_ERROR meiRunArc (void); +static MEI_ERROR meiRunAdslModem (void); +static int meiGetPage (u32 Page, u32 data, u32 MaxSize, u32 * Buffer, + u32 * Dest); +void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, + u16 * data, u16 * CMVMSG); +MEI_ERROR meiCMV (u16 * request, int reply, u16 * response); +static void meiMailboxInterruptsDisable (void); +static void meiMailboxInterruptsEnable (void); +static int update_bar_register (int nTotalBar); +static int free_image_buffer (int type); +static int alloc_processor_memory (unsigned long size, + smmu_mem_info_t * adsl_mem_info); +ssize_t mei_write (MEI_file_t * filp, char *buf, size_t size, loff_t * loff); +int mei_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command, + unsigned long lon); + +#ifdef CONFIG_PROC_FS +static int proc_read (struct file *file, char *buf, size_t nbytes, + loff_t * ppos); +static ssize_t proc_write (struct file *file, const char *buffer, + size_t count, loff_t * ppos); +#endif + +#ifdef CONFIG_IFXMIPS_MEI_MIB +int mei_mib_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command, + unsigned long lon); +int mei_mib_adsl_link_up (void); +int mei_mib_adsl_link_down (void); +int ifxmips_mei_mib_init (void); +int ifxmips_mei_mib_cleanup (void); +#endif +#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT) +static int ifxmips_mei_led_init (void); +static int ifxmips_mei_led_cleanup (void); +static int adsl_led_flash_task (void); +#endif +// for clearEoC +#ifdef IFXMIPS_CLEAR_EOC +extern void ifx_push_eoc (struct sk_buff *pkt); +#endif + +/************************************************************************ + * variable declaration + ************************************************************************/ +static smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS]; +static unsigned long image_size = 0; +static struct timeval time_disconnect, time_showtime; +static u16 unavailable_seconds = 0; +#ifdef IFXMIPS_CLEAR_EOC +static wait_queue_head_t wait_queue_hdlc_poll; ///clear eoc +#endif + +static int showtime_lock_flag = 0; +static int quiet_mode_flag = 0; + +int showtime = 0; +static int major = IFXMIPS_MEI_MAJOR; +MEI_mutex_t mei_sema; + +// Mei to ARC CMV count, reply count, ARC Indicator count +static int indicator_count = 0; +static int cmv_count = 0; +static int reply_count = 0; +static u16 Recent_indicator[MSG_LENGTH]; +static int reset_arc_flag = 0; + +// Used in interrupt handler as flags +static int arcmsgav = 0; +static int cmv_reply = 0; +static int cmv_waiting = 0; +static int modem_ready = 0; +// to wait for arc cmv reply, sleep on wait_queue_arcmsgav; +static wait_queue_head_t wait_queue_arcmsgav; + +// CMV mailbox messages +// ARC to MEI message +static u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4))); +// MEI to ARC message +static u16 CMV_TxMsg[MSG_LENGTH] __attribute__ ((aligned (4))); + +static u32 *mei_arc_swap_buff = NULL; // holding swap pages +static ARC_IMG_HDR *img_hdr; +static int arc_halt_flag = 0; +static int nBar = 0; // total bars to be used. + +static u32 loop_diagnostics_mode = 0; +wait_queue_head_t wait_queue_loop_diagnostic; +int loop_diagnostics_completed = 0; +u32 adsl_mode, adsl_mode_extend; // adsl mode : adsl/ 2/ 2+ +static int autoboot_enable_flag = 0; + +#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT +static u8 bDualLatency = 0; +#endif + +#ifdef IFXMIPS_CLEAR_EOC +static u16 ceoc_read_idx = 0; +#endif + +#ifdef IFX_ADSL_L3_MODE_SUPPORT +static wait_queue_head_t wait_queue_l3; // l3 power mode +static int l3_shutdown = 0; +int get_l3_power_status (void); +#endif + +#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT) +int led_status_on = 0, led_need_to_flash = 0; +static int stop_led_module = 0; //wakeup and clean led module +static wait_queue_head_t wait_queue_led_polling; // adsl led +#endif + +static struct file_operations mei_operations = { + write : mei_write, + ioctl : mei_ioctl, +}; + +#ifdef CONFIG_PROC_FS +static struct proc_dir_entry *meidir; +static struct file_operations proc_operations = { + read:proc_read, + write:proc_write, +}; +static reg_entry_t regs[PROC_ITEMS]; //total items to be monitored by /proc/mei +#define NUM_OF_REG_ENTRY (sizeof(regs)/sizeof(reg_entry_t)) +#endif //#ifdef CONFIG_PROC_FS + +#ifdef DFE_LOOPBACK +unsigned char got_int = 0; +#endif + +///////////////// mei access Rd/Wr methods /////////////// +/** + * Write a value to register + * This function writes a value to ifxmips register + * + * \param ul_address The address to write + * \param ul_data The value to write + * \ingroup Internal + */ +static void +meiLongwordWrite (u32* ul_address, u32 ul_data) +{ + writel(ul_data, ul_address); + wmb(); + return; +} // end of "meiLongwordWrite(..." + +/** + * Read the ifxmips register + * This function read the value from ifxmips register + * + * \param ul_address The address to write + * \param pul_data Pointer to the data + * \ingroup Internal + */ +static void +meiLongwordRead (u32* ul_address, u32 * pul_data) +{ + //*pul_data = *((volatile u32 *)ul_address); + *pul_data = readl(ul_address); + wmb(); + return; +} // end of "meiLongwordRead(..." + +/** + * Write several DWORD datas to ARC memory via ARC DMA interface + * This function writes several DWORD datas to ARC memory via DMA interface. + * + * \param destaddr The address to write + * \param databuff Pointer to the data buffer + * \param databuffsize Number of DWORDs to write + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiDMAWrite (u32 destaddr, u32 * databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + MEI_intstat_t flags; + + if (destaddr & 3) + return MEI_FAILURE; + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_LOCKINT (flags); +#endif + + //printk("destaddr=%X,size=%d\n",destaddr,databuffsize); + // Set the write transfer address + meiLongwordWrite (MEI_XFR_ADDR, destaddr); + + // Write the data pushed across DMA + while (databuffsize--) { + temp = *p; + if (databuff == (u32 *) CMV_TxMsg) + MEI_HALF_WORD_SWAP (temp); + meiLongwordWrite (MEI_DATA_XFR, temp); + p++; + } // end of "while(..." + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_UNLOCKINT (flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMAWrite(..." + +/** + * Read several DWORD datas from ARC memory via ARC DMA interface + * This function reads several DWORD datas from ARC memory via DMA interface. + * + * \param srcaddr The address to read + * \param databuff Pointer to the data buffer + * \param databuffsize Number of DWORDs to read + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiDMARead (u32 srcaddr, u32 * databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_intstat_t flags; +#endif + //printk("destaddr=%X,size=%X\n",srcaddr,databuffsize); + if (srcaddr & 3) + return MEI_FAILURE; + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_LOCKINT (flags); +#endif + + // Set the read transfer address + meiLongwordWrite (MEI_XFR_ADDR, srcaddr); + + // Read the data popped across DMA + while (databuffsize--) { + meiLongwordRead (MEI_DATA_XFR, &temp); + if (databuff == (u32 *) CMV_RxMsg) // swap half word + MEI_HALF_WORD_SWAP (temp); + *p = temp; + p++; + } // end of "while(..." + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_UNLOCKINT (flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMARead(..." + +/** + * Switch the ARC control mode + * This function switchs the ARC control mode to JTAG mode or MEI mode + * + * \param mode The mode want to switch: JTAG_MASTER_MODE or MEI_MASTER_MODE. + * \ingroup Internal + */ +static void +meiControlModeSwitch (int mode) +{ + u32 temp = 0x0; + meiLongwordRead ( MEI_DBG_MASTER, &temp); + switch (mode) { + case JTAG_MASTER_MODE: + temp &= ~(HOST_MSTR); + break; + case MEI_MASTER_MODE: + temp |= (HOST_MSTR); + break; + default: + printk ("meiControlModeSwitch: unkonwn mode [%d]\n", + mode); + return; + } + meiLongwordWrite (MEI_DBG_MASTER, temp); +} + +/** + * Poll for transaction complete signal + * This function polls and waits for transaction complete signal. + * + * \ingroup Internal + */ +static void +meiPollForDbgDone (void) +{ + u32 query = 0; + int i = 0; + while (i < WHILE_DELAY) { + meiLongwordRead (ARC_TO_MEI_INT, &query); + query &= (ARC_TO_MEI_DBG_DONE); + if (query) + break; + i++; + if (i == WHILE_DELAY) { + printk ("\n\n PollforDbg fail"); + } + } + meiLongwordWrite ( ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE); // to clear this interrupt +} // end of "meiPollForDbgDone(..." + +/** + * ARC Debug Memory Access for a single DWORD reading. + * This function used for direct, address-based access to ARC memory. + * + * \param DEC_mode ARC memory space to used + * \param address Address to read + * \param data Pointer to data + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +_meiDebugLongWordRead (u32 DEC_mode, u32 address, u32 * data) +{ + meiLongwordWrite ( MEI_DEBUG_DEC, DEC_mode); + meiLongwordWrite ( MEI_DEBUG_RAD, address); + meiPollForDbgDone (); + meiLongwordRead (MEI_DEBUG_DATA, data); + return MEI_SUCCESS; +} + +/** + * ARC Debug Memory Access for a single DWORD writing. + * This function used for direct, address-based access to ARC memory. + * + * \param DEC_mode ARC memory space to used + * \param address The address to write + * \param data The data to write + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +_meiDebugLongWordWrite (u32 DEC_mode, u32 address, u32 data) +{ + meiLongwordWrite (MEI_DEBUG_DEC, DEC_mode); + meiLongwordWrite (MEI_DEBUG_WAD, address); + meiLongwordWrite (MEI_DEBUG_DATA, data); + meiPollForDbgDone (); + return MEI_SUCCESS; +} + +/** + * ARC Debug Memory Access for writing. + * This function used for direct, address-based access to ARC memory. + * + * \param destaddr The address to ead + * \param databuffer Pointer to data + * \param databuffsize The number of DWORDs to read + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ + +MEI_ERROR +meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_intstat_t flags; +#endif + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_LOCKINT (flags); +#endif + + // Open the debug port before DMP memory write + meiControlModeSwitch (MEI_MASTER_MODE); + + meiLongwordWrite (MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); + + // For the requested length, write the address and write the data + address = destaddr; + buffer = databuff; + for (i = 0; i < databuffsize; i++) { + temp = *buffer; + _meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, address, + temp); + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory write + meiControlModeSwitch (JTAG_MASTER_MODE); + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_UNLOCKINT (flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugWrite(..." + +/** + * ARC Debug Memory Access for reading. + * This function used for direct, address-based access to ARC memory. + * + * \param srcaddr The address to read + * \param databuffer Pointer to data + * \param databuffsize The number of DWORDs to read + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiDebugRead (u32 srcaddr, u32 * databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_intstat_t flags; +#endif + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_LOCKINT (flags); +#endif + + // Open the debug port before DMP memory read + meiControlModeSwitch (MEI_MASTER_MODE); + + meiLongwordWrite (MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); + + // For the requested length, write the address and read the data + address = srcaddr; + buffer = databuff; + for (i = 0; i < databuffsize; i++) { + _meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, address, + &temp); + *buffer = temp; + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory read + meiControlModeSwitch (JTAG_MASTER_MODE); + +#ifdef IFXMIPS_DMA_DEBUG_MUTEX + MEI_UNLOCKINT (flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugRead(..." + +/** + * Send a message to ARC MailBox. + * This function sends a message to ARC Mailbox via ARC DMA interface. + * + * \param msgsrcbuffer Pointer to message. + * \param msgsize The number of words to write. + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiMailboxWrite (u16 * msgsrcbuffer, u16 msgsize) +{ + int i; + u32 arc_mailbox_status = 0x0; + u32 temp = 0; + MEI_ERROR meiMailboxError = MEI_SUCCESS; + + // Write to mailbox + meiMailboxError = + meiDMAWrite (MEI_TO_ARC_MAILBOX, (u32 *) msgsrcbuffer, + msgsize / 2); + meiMailboxError = + meiDMAWrite (MEI_TO_ARC_MAILBOXR, (u32 *) (&temp), 1); + + // Notify arc that mailbox write completed + cmv_waiting = 1; + meiLongwordWrite (MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV); + + i = 0; + while (i < WHILE_DELAY) { // wait for ARC to clear the bit + meiLongwordRead ( MEI_TO_ARC_INT, &arc_mailbox_status); + if ((arc_mailbox_status & MEI_TO_ARC_MSGAV) != + MEI_TO_ARC_MSGAV) + break; + i++; + if (i == WHILE_DELAY) { + printk + ("\n\n MEI_TO_ARC_MSGAV not cleared by ARC"); + meiMailboxError = MEI_FAILURE; + } + } + + // Return + return meiMailboxError; + +} // end of "meiMailboxWrite(..." + +/** + * Read a message from ARC MailBox. + * This function reads a message from ARC Mailbox via ARC DMA interface. + * + * \param msgsrcbuffer Pointer to message. + * \param msgsize The number of words to read + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiMailboxRead (u16 * msgdestbuffer, u16 msgsize) +{ + MEI_ERROR meiMailboxError = MEI_SUCCESS; + // Read from mailbox + meiMailboxError = + meiDMARead (ARC_TO_MEI_MAILBOX, (u32 *) msgdestbuffer, + msgsize / 2); + + // Notify arc that mailbox read completed + meiLongwordWrite (ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); + + // Return + return meiMailboxError; + +} // end of "meiMailboxRead(..." + +/** + * Download boot pages to ARC. + * This function downloads boot pages to ARC. + * + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiDownloadBootPages (void) +{ + int boot_loop; + int page_size; + u32 dest_addr; + + /* + ** DMA the boot code page(s) + */ +#ifndef HEADER_SWAP + for (boot_loop = 1; boot_loop < le32_to_cpu (img_hdr->count); + boot_loop++) +#else + for (boot_loop = 1; boot_loop < (img_hdr->count); boot_loop++) +#endif + { +#ifndef HEADER_SWAP + if (le32_to_cpu (img_hdr->page[boot_loop].p_size) & BOOT_FLAG) +#else + if ((img_hdr->page[boot_loop].p_size) & BOOT_FLAG) +#endif + { + page_size = + meiGetPage (boot_loop, GET_PROG, MAXSWAPSIZE, + mei_arc_swap_buff, &dest_addr); + if (page_size > 0) { + meiDMAWrite (dest_addr, mei_arc_swap_buff, + page_size); + } + } +#ifndef HEADER_SWAP + if (le32_to_cpu (img_hdr->page[boot_loop].d_size) & BOOT_FLAG) +#else + if ((img_hdr->page[boot_loop].d_size) & BOOT_FLAG) +#endif + { + page_size = + meiGetPage (boot_loop, GET_DATA, MAXSWAPSIZE, + mei_arc_swap_buff, &dest_addr); + if (page_size > 0) { + meiDMAWrite (dest_addr, mei_arc_swap_buff, + page_size); + } + } + } + return MEI_SUCCESS; +} + +/** + * Initial efuse rar. + **/ +static void +mei_fuse_rar_init (void) +{ + u32 data = 0; + meiDMAWrite (IRAM0_BASE, &data, 1); + meiDMAWrite (IRAM0_BASE + 4, &data, 1); + meiDMAWrite (IRAM1_BASE, &data, 1); + meiDMAWrite (IRAM1_BASE + 4, &data, 1); + meiDMAWrite (BRAM_BASE, &data, 1); + meiDMAWrite (BRAM_BASE + 4, &data, 1); + meiDMAWrite (ADSL_DILV_BASE, &data, 1); + meiDMAWrite (ADSL_DILV_BASE + 4, &data, 1); +} + +/** + * efuse rar program + **/ +static void +mei_fuse_prg (void) +{ + u32 reg_data, fuse_value; + int i = 0; + meiLongwordRead ( IFXMIPS_RCU_REQ, ®_data); + while ((reg_data & 0x10000000) == 0) { + meiLongwordRead ( IFXMIPS_RCU_REQ, ®_data); + //add a watchdog + i++; + /* 0x4000 translate to about 16 ms@111M, so should be enough */ + if (i == 0x4000) + return; + } + // STEP a: Prepare memory for external accesses + // Write fuse_en bit24 + meiLongwordRead (IFXMIPS_RCU_REQ, ®_data); + meiLongwordWrite (IFXMIPS_RCU_REQ, reg_data | (1 << 24)); + + mei_fuse_rar_init (); + for (i = 0; i < 4; i++) { + meiLongwordRead((u32*)(IFXMIPS_FUSE_BASE_ADDR + (i * 4)), &fuse_value); + switch (fuse_value & 0xF0000) { + case 0x80000: + reg_data = + ((fuse_value & RX_DILV_ADDR_BIT_MASK) | + (RX_DILV_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (ADSL_DILV_BASE, ®_data, 1); + break; + case 0x90000: + reg_data = + ((fuse_value & RX_DILV_ADDR_BIT_MASK) | + (RX_DILV_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (ADSL_DILV_BASE + 4, ®_data, 1); + break; + case 0xA0000: + reg_data = + ((fuse_value & IRAM0_ADDR_BIT_MASK) | + (IRAM0_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (IRAM0_BASE, ®_data, 1); + break; + case 0xB0000: + reg_data = + ((fuse_value & IRAM0_ADDR_BIT_MASK) | + (IRAM0_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (IRAM0_BASE + 4, ®_data, 1); + break; + case 0xC0000: + reg_data = + ((fuse_value & IRAM1_ADDR_BIT_MASK) | + (IRAM1_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (IRAM1_BASE, ®_data, 1); + break; + case 0xD0000: + reg_data = + ((fuse_value & IRAM1_ADDR_BIT_MASK) | + (IRAM1_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (IRAM1_BASE + 4, ®_data, 1); + break; + case 0xE0000: + reg_data = + ((fuse_value & BRAM_ADDR_BIT_MASK) | + (BRAM_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (BRAM_BASE, ®_data, 1); + break; + case 0xF0000: + reg_data = + ((fuse_value & BRAM_ADDR_BIT_MASK) | + (BRAM_ADDR_BIT_MASK + 0x1)); + meiDMAWrite (BRAM_BASE + 4, ®_data, 1); + break; + default: // PPE efuse + break; + } + } + meiLongwordRead (IFXMIPS_RCU_REQ, ®_data); + meiLongwordWrite (IFXMIPS_RCU_REQ, reg_data & 0xF7FFFFFF); +} + +/** + * Download boot code to ARC. + * This function downloads boot code to ARC. + * + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiDownloadBootCode (void) +{ + u32 arc_debug_data = ACL_CLK_MODE_ENABLE; //0x10 + + meiMailboxInterruptsDisable (); + + // Switch arc control from JTAG mode to MEI mode + meiControlModeSwitch (MEI_MASTER_MODE); + //enable ac_clk signal + _meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0, + &arc_debug_data); + arc_debug_data |= ACL_CLK_MODE_ENABLE; + _meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0, + arc_debug_data); + //Switch arc control from MEI mode to JTAG mode + meiControlModeSwitch (JTAG_MASTER_MODE); + + mei_fuse_prg (); //program fuse rar + + meiDownloadBootPages (); + + return MEI_SUCCESS; + +} // end of "meiDownloadBootCode(..." + +//#endif + +/** + * Halt the ARC. + * This function halts the ARC. + * + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiHaltArc (void) +{ + u32 arc_debug_data = 0x0; + + // Switch arc control from JTAG mode to MEI mode + meiControlModeSwitch (MEI_MASTER_MODE); + _meiDebugLongWordRead (MEI_DEBUG_DEC_AUX_MASK, ARC_DEBUG, + &arc_debug_data); + arc_debug_data |= (BIT1); + _meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, ARC_DEBUG, + arc_debug_data); + // Switch arc control from MEI mode to JTAG mode + meiControlModeSwitch (JTAG_MASTER_MODE); + arc_halt_flag = 1; + + MEI_WAIT (10); + // Return + return MEI_SUCCESS; + +} // end of "meiHalt(..." + +/** + * Run the ARC. + * This function runs the ARC. + * + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiRunArc (void) +{ + u32 arc_debug_data = 0x0; + + // Switch arc control from JTAG mode to MEI mode- write '1' to bit0 + meiControlModeSwitch (MEI_MASTER_MODE); + _meiDebugLongWordRead (MEI_DEBUG_DEC_AUX_MASK, AUX_STATUS, + &arc_debug_data); + + // Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared) + arc_debug_data &= ~(BIT25); + _meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_STATUS, + arc_debug_data); + + // Switch arc control from MEI mode to JTAG mode- write '0' to bit0 + meiControlModeSwitch (JTAG_MASTER_MODE); + // Enable mask for arc codeswap interrupts + meiMailboxInterruptsEnable (); + arc_halt_flag = 0; + + // Return + return MEI_SUCCESS; + +} // end of "meiActivate(..." + +/** + * Reset the ARC. + * This function resets the ARC. + * + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiResetARC (void) +{ + + u32 arc_debug_data = 0; + showtime = 0; + + meiHaltArc (); + + meiLongwordRead (IFXMIPS_RCU_REQ, &arc_debug_data); + meiLongwordWrite (IFXMIPS_RCU_REQ, + arc_debug_data | IFXMIPS_RCU_RST_REQ_DFE | + IFXMIPS_RCU_RST_REQ_AFE); + meiLongwordWrite (IFXMIPS_RCU_REQ, arc_debug_data); + // reset ARC + meiLongwordWrite(MEI_RST_CONTROL, MEI_SOFT_RESET); + meiLongwordWrite(MEI_RST_CONTROL, 0); + + meiMailboxInterruptsDisable (); + MEI_MUTEX_INIT (mei_sema, 1); + reset_arc_flag = 1; + modem_ready = 0; + return MEI_SUCCESS; +} + +/** + * Reset the ARC, download boot codes, and run the ARC. + * This function resets the ARC, downloads boot codes to ARC, and runs the ARC. + * + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +static MEI_ERROR +meiRunAdslModem (void) +{ + int nSize = 0, idx = 0; + + img_hdr = (ARC_IMG_HDR *) adsl_mem_info[0].address; +#if defined(HEADER_SWAP) + if ((img_hdr->count) * sizeof (ARC_SWP_PAGE_HDR) > SDRAM_SEGMENT_SIZE) +#else //define(HEADER_SWAP) + if (le32_to_cpu (img_hdr->count) * sizeof (ARC_SWP_PAGE_HDR) > + SDRAM_SEGMENT_SIZE) +#endif //define(HEADER_SWAP) + { + printk + ("segment_size is smaller than firmware header size\n"); + return -1; + } + // check image size + for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) { + nSize += adsl_mem_info[idx].nCopy; + } + if (nSize != image_size) { + printk + ("Firmware download is not completed. \nPlease download firmware again!\n"); + return -1; + } + // TODO: check crc + /// + if (reset_arc_flag == 0) { + u32 arc_debug_data; + + meiResetARC (); + meiControlModeSwitch (MEI_MASTER_MODE); + //enable ac_clk signal + _meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0, + &arc_debug_data); + arc_debug_data |= ACL_CLK_MODE_ENABLE; + _meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0, + arc_debug_data); + meiControlModeSwitch (JTAG_MASTER_MODE); + meiHaltArc (); + update_bar_register (nBar); + } + reset_arc_flag = 0; + if (arc_halt_flag == 0) { + meiHaltArc (); + } + printk ("Starting to meiDownloadBootCode\n"); + + meiDownloadBootCode(); + + // 1.00.09 20/12/2006 TC Chen + // disable USB OC interrupt, reset DSL chip will triger OC interrupt + disable_irq(IFXMIPS_USB_OC_INT); + + meiRunArc (); + + MEI_WAIT (100); //wait 100ms + + //1.00.09 20/12/2006 TC Chen + // restore USB OC interrupt + MEI_MASK_AND_ACK_IRQ(IFXMIPS_USB_OC_INT); + enable_irq(IFXMIPS_USB_OC_INT); + + if (modem_ready != 1) { + printk ("Running ADSL modem firmware fail!\n"); + return MEI_FAILURE; + } + + + return MEI_SUCCESS; +} + +/** + * Get the page's data pointer + * This function caculats the data address from the firmware header. + * + * \param Page The page number. + * \param data Data page or program page. + * \param MaxSize The maximum size to read. + * \param Buffer Pointer to data. + * \param Dest Pointer to the destination address. + * \return The number of bytes to read. + * \ingroup Internal + */ +static int +meiGetPage (u32 Page, u32 data, u32 MaxSize, u32 * Buffer, u32 * Dest) +{ + u32 size; + u32 i; + u32 *p; + u32 idx, offset, nBar = 0; + + if (Page > img_hdr->count) + return -2; + /* + ** Get program or data size, depending on "data" flag + */ +#ifndef HEADER_SWAP + size = (data == + GET_DATA) ? le32_to_cpu (img_hdr->page[Page]. + d_size) : le32_to_cpu (img_hdr-> + page[Page]. + p_size); +#else + size = (data == + GET_DATA) ? (img_hdr->page[Page].d_size) : (img_hdr-> + page[Page]. + p_size); +#endif + size &= BOOT_FLAG_MASK; // Clear boot bit! + if (size > MaxSize) + return -1; + + if (size == 0) + return 0; + /* + ** Get program or data offset, depending on "data" flag + */ +#ifndef HEADER_SWAP + i = data ? le32_to_cpu (img_hdr->page[Page]. + d_offset) : le32_to_cpu (img_hdr->page[Page]. + p_offset); +#else + i = data ? (img_hdr->page[Page].d_offset) : (img_hdr->page[Page]. + p_offset); +#endif + + /* + ** Copy data/program to buffer + */ + + idx = i / SDRAM_SEGMENT_SIZE; + offset = i % SDRAM_SEGMENT_SIZE; + p = (u32 *) ((u8 *) adsl_mem_info[idx].address + offset); + + for (i = 0; i < size; i++) { + if (offset + i * 4 - (nBar * SDRAM_SEGMENT_SIZE) >= + SDRAM_SEGMENT_SIZE) { + idx++; + nBar++; + p = (u32 *) ((u8 *) + KSEG1ADDR ((u32) adsl_mem_info[idx]. + address)); + } + Buffer[i] = *p++; +#ifdef BOOT_SWAP +#ifndef IMAGE_SWAP + Buffer[i] = le32_to_cpu (Buffer[i]); +#endif +#endif + } + + /* + ** Pass back data/program destination address + */ +#ifndef HEADER_SWAP + *Dest = data ? le32_to_cpu (img_hdr->page[Page]. + d_dest) : le32_to_cpu (img_hdr-> + page[Page].p_dest); +#else + *Dest = data ? (img_hdr->page[Page].d_dest) : (img_hdr->page[Page]. + p_dest); +#endif + + return size; +} + +////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// + +/** + * Compose a message. + * This function compose a message from opcode, group, address, index, size, and data + * + * \param opcode The message opcode + * \param group The message group number + * \param address The message address. + * \param index The message index. + * \param size The number of words to read/write. + * \param data The pointer to data. + * \param CMVMSG The pointer to message buffer. + * \ingroup Internal + */ +void +makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data, + u16 * CMVMSG) +{ + memset (CMVMSG, 0, MSG_LENGTH * 2); + CMVMSG[0] = (opcode << 4) + (size & 0xf); + CMVMSG[1] = (((index == 0) ? 0 : 1) << 7) + (group & 0x7f); + CMVMSG[2] = address; + CMVMSG[3] = index; + if (opcode == H2D_CMV_WRITE) + memcpy (CMVMSG + 4, data, size * 2); + return; +} + +/** + * Send a message to ARC and read the response + * This function sends a message to arc, waits the response, and reads the responses. + * + * \param request Pointer to the request + * \param reply Wait reply or not. + * \param response Pointer to the response + * \return MEI_SUCCESS or MEI_FAILURE + * \ingroup Internal + */ +MEI_ERROR +meiCMV (u16 * request, int reply, u16 * response) // write cmv to arc, if reply needed, wait for reply +{ + MEI_ERROR meierror; +#if defined(IFXMIPS_PORT_RTEMS) + int delay_counter = 0; +#endif + + cmv_reply = reply; + memcpy (CMV_TxMsg, request, MSG_LENGTH * 2); + arcmsgav = 0; + + meierror = meiMailboxWrite (CMV_TxMsg, MSG_LENGTH); + + if (meierror != MEI_SUCCESS) { + cmv_waiting = 0; + arcmsgav = 0; + printk ("\n\n MailboxWrite Fail."); + return meierror; + } + else { + cmv_count++; + } + + if (cmv_reply == NO_REPLY) + return MEI_SUCCESS; + +#if !defined(IFXMIPS_PORT_RTEMS) + if (arcmsgav == 0) + MEI_WAIT_EVENT_TIMEOUT (wait_queue_arcmsgav, CMV_TIMEOUT); +#else + while (arcmsgav == 0 && delay_counter < CMV_TIMEOUT / 5) { + MEI_WAIT (5); + delay_counter++; + } +#endif + + cmv_waiting = 0; + if (arcmsgav == 0) { //CMV_timeout + arcmsgav = 0; + printk ("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n"); + return MEI_MAILBOX_TIMEOUT; + } + else { + arcmsgav = 0; + reply_count++; + memcpy (response, CMV_RxMsg, MSG_LENGTH * 2); + return MEI_SUCCESS; + } + return MEI_SUCCESS; +} + +///////////////////// Interrupt handler ///////////////////////// +/** + * Disable ARC to MEI interrupt + * + * \ingroup Internal + */ +static void +meiMailboxInterruptsDisable (void) +{ + meiLongwordWrite (ARC_TO_MEI_INT_MASK, 0x0); +} // end of "meiMailboxInterruptsDisable(..." + +/** + * Eable ARC to MEI interrupt + * + * \ingroup Internal + */ +static void +meiMailboxInterruptsEnable (void) +{ + meiLongwordWrite (ARC_TO_MEI_INT_MASK, MSGAV_EN); +} // end of "meiMailboxInterruptsEnable(..." + +/** + * MEI interrupt handler + * + * \param int1 + * \param void0 + * \param regs Pointer to the structure of ifxmips mips registers + * \ingroup Internal + */ +irqreturn_t +mei_interrupt_arcmsgav (int int1, void *void0) +{ + u32 scratch; + +#if defined(DFE_LOOPBACK) && defined(DFE_PING_TEST) + dfe_loopback_irq_handler (); + goto out; +#endif //DFE_LOOPBACK + + meiDebugRead (ARC_MEI_MAILBOXR, &scratch, 1); + if (scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) { + printk("\n\n Receive Code Swap Request interrupt!!!"); + goto out; + } + else if (scratch & OMB_CLEAREOC_INTERRUPT_CODE) // clear eoc message interrupt + { + meiLongwordWrite (ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); +#if defined (IFXMIPS_CLEAR_EOC) + MEI_WAKEUP_EVENT (wait_queue_hdlc_poll); +#endif + MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT); + goto out; + } + else { // normal message + meiMailboxRead (CMV_RxMsg, MSG_LENGTH); +#if 0 + { + int msg_idx = 0; + printk ("got interrupt\n"); + for (msg_idx = 0; msg_idx < MSG_LENGTH; msg_idx++) { + printk ("%04X ", CMV_RxMsg[msg_idx]); + if (msg_idx % 8 == 7) + printk ("\n"); + } + printk ("\n"); + } +#endif + if (cmv_waiting == 1) { + arcmsgav = 1; + cmv_waiting = 0; +#if !defined(IFXMIPS_PORT_RTEMS) + MEI_WAKEUP_EVENT (wait_queue_arcmsgav); +#endif + } + else { + indicator_count++; + memcpy ((char *) Recent_indicator, (char *) CMV_RxMsg, + MSG_LENGTH * 2); + if (((CMV_RxMsg[0] & 0xff0) >> 4) == D2H_AUTONOMOUS_MODEM_READY_MSG) // arc ready + { //check ARC ready message + printk ("Got MODEM_READY_MSG\n"); + modem_ready = 1; + MEI_MUTEX_UNLOCK (mei_sema); // allow cmv access + } + } + } + + MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT); +out: + return IRQ_HANDLED;; +} + +////////////////////////hdlc //////////////// + +/** + * Get the hdlc status + * + * \return HDLC status + * \ingroup Internal + */ +static unsigned int +ifx_me_hdlc_status (void) +{ + u16 CMVMSG[MSG_LENGTH]; + int ret; + + if (showtime != 1) + return -ENETRESET; + + makeCMV (H2D_CMV_READ, STAT, 14, 0, 1, NULL, CMVMSG); //Get HDLC status + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + return CMVMSG[4] & 0x0F; +} + +/** + * Check if the me is reslved. + * + * \param status the me status + * \return ME_HDLC_UNRESOLVED or ME_HDLC_RESOLVED + * \ingroup Internal + */ +int +ifx_me_is_resloved (int status) +{ + u16 CMVMSG[MSG_LENGTH]; + int ret; + if (adsl_mode <= 8 && adsl_mode_extend == 0) // adsl mode + { + makeCMV (H2D_CMV_READ, CNTL, 2, 0, 1, NULL, CMVMSG); //Get ME-HDLC Control + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return ME_HDLC_UNRESOLVED; + } + if (CMVMSG[4] & (1 << 0)) { + return ME_HDLC_UNRESOLVED; + } + } + else { + if (status == ME_HDLC_MSG_QUEUED + || status == ME_HDLC_MSG_SENT) + return ME_HDLC_UNRESOLVED; + if (status == ME_HDLC_IDLE) { + makeCMV (H2D_CMV_READ, CNTL, 2, 0, 1, NULL, CMVMSG); //Get ME-HDLC Control + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return IFX_POP_EOC_FAIL; + } + if (CMVMSG[4] & (1 << 0)) { + return ME_HDLC_UNRESOLVED; + } + } + } + return ME_HDLC_RESOLVED; +} + +int +_ifx_me_hdlc_send (unsigned char *hdlc_pkt, int pkt_len, int max_length) +{ + int ret; + u16 CMVMSG[MSG_LENGTH]; + u16 data = 0; + u16 len = 0; + int rx_length = 0; + int write_size = 0; + + if (pkt_len > max_length) { + makeCMV (H2D_CMV_READ, INFO, 85, 2, 1, NULL, CMVMSG); //Get ME-HDLC Control + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + rx_length = CMVMSG[4]; + if (rx_length + max_length < pkt_len) { + printk ("Exceed maximum eoc rx(%d)+tx(%d) message length\n", rx_length, max_length); + return -EMSGSIZE; + } + data = 1; + makeCMV (H2D_CMV_WRITE, INFO, 85, 6, 1, &data, CMVMSG); //disable RX Eoc + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + } + while (len < pkt_len) { + write_size = pkt_len - len; + if (write_size > 24) + write_size = 24; + //printk("len=%d,write_size=%d,pkt_len=%d\n",len,write_size,pkt_len); + memset (CMVMSG, 0, sizeof (CMVMSG)); + makeCMV (H2D_CMV_WRITE, INFO, 81, len / 2, (write_size + 1) / 2, (u16 *) (hdlc_pkt + len), CMVMSG); //Write clear eoc message to ARC + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + len += write_size; + } + makeCMV (H2D_CMV_WRITE, INFO, 83, 2, 1, &len, CMVMSG); //Update tx message length + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + + data = (1 << 0); + makeCMV (H2D_CMV_WRITE, CNTL, 2, 0, 1, &data, CMVMSG); //Start to send + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + return 0; +} + +/** + * Send hdlc packets + * + * \param hdlc_pkt Pointer to hdlc packet + * \param hdlc_pkt_len The number of bytes to send + * \return success or failure. + * \ingroup Internal + */ +int +ifx_me_hdlc_send (unsigned char *hdlc_pkt, int hdlc_pkt_len) +{ + int hdlc_status = 0; + u16 CMVMSG[MSG_LENGTH]; + int max_hdlc_tx_length = 0, ret = 0, retry = 0; + int power_mode = 0; + int send_busy_counter = 0; + int send_retry = 0; + + HDLC_SEND: + // retry 1000 times (10 seconds) + while (retry < 1000) { + /* In L2 power mode, do not read the OHC related parameters, + instead give the indication to the calling IOCTL, + that the readout fails (just return -EBUSY). */ + power_mode = get_l3_power_status(); + if (power_mode == L2_POWER_MODE) { + return -EBUSY; + } + + hdlc_status = ifx_me_hdlc_status (); + if (ifx_me_is_resloved (hdlc_status) == ME_HDLC_RESOLVED) // arc ready to send HDLC message + { + makeCMV (H2D_CMV_READ, INFO, 83, 0, 1, NULL, CMVMSG); //Get Maximum Allowed HDLC Tx Message Length + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + printk + ("ifx_me_hdlc_send failed. Return -EIO"); + return -EIO; + } + max_hdlc_tx_length = CMVMSG[4]; + ret = _ifx_me_hdlc_send (hdlc_pkt, hdlc_pkt_len, + max_hdlc_tx_length); + return ret; + } + else { + if (hdlc_status == ME_HDLC_MSG_SENT) + send_busy_counter++; + } + retry++; + MEI_WAIT (1); + } + // wait 10 seconds and FW still report busy -> reset FW HDLC status + if (send_busy_counter > 950 && send_retry == 0) { + u16 data = 0; + send_retry = 1; + retry = 0; + printk ("Reset FW HDLC status!!\n"); + send_busy_counter = 0; + data = (1 << 1); + makeCMV (H2D_CMV_WRITE, CNTL, 2, 0, 1, NULL, CMVMSG); //Force reset to idle + ret = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + goto HDLC_SEND; + } + printk ("ifx_me_hdlc_send failed. Return -EBUSY"); + return -EBUSY; +} + +/** + * Read the hdlc packets + * + * \param hdlc_pkt Pointer to hdlc packet + * \param hdlc_pkt_len The maximum number of bytes to read + * \return The number of bytes which reads. + * \ingroup Internal + */ +int +ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len) +{ + u16 CMVMSG[MSG_LENGTH]; + int msg_read_len, ret = 0, pkt_len = 0, retry = 0; + + while (retry < 10) { + ret = ifx_me_hdlc_status (); + if (ret == ME_HDLC_RESP_RCVD) { + int current_size = 0; + makeCMV (H2D_CMV_READ, INFO, 83, 3, 1, NULL, CMVMSG); //Get EoC packet length + ret = mei_ioctl ((MEI_inode_t *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + + pkt_len = CMVMSG[4]; + if (pkt_len > max_hdlc_pkt_len) { + ret = -ENOMEM; + goto error; + } + while (current_size < pkt_len) { + if (pkt_len - current_size > + (MSG_LENGTH * 2 - 8)) + msg_read_len = (MSG_LENGTH * 2 - 8); + else + msg_read_len = + pkt_len - (current_size); + makeCMV (H2D_CMV_READ, INFO, 82, 0 + (current_size / 2), (msg_read_len + 1) / 2, NULL, CMVMSG); //Get hdlc packet + ret = mei_ioctl ((MEI_inode_t *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + goto error; + } + memcpy (hdlc_pkt + current_size, &CMVMSG[4], + msg_read_len); + current_size += msg_read_len; + } + ret = current_size; + break; + } + else { + ret = -ENODATA; + } + + retry++; + + MEI_WAIT (10); + } + error: + return ret; +} + +#if defined(IFXMIPS_CLEAR_EOC) +int +ifx_me_ceoc_send (struct sk_buff *eoc_pkt) +{ + int ret, pkt_len = 0; + unsigned char *pkt_data_ptr; + int offset = 0; + int swap_idx = 0; + + if (adsl_mode <= 8 && adsl_mode_extend == 0) // adsl mode + { + pkt_len = eoc_pkt->len; + + pkt_data_ptr = kmalloc (pkt_len + 3, GFP_KERNEL); + + offset = 2; + pkt_data_ptr[0] = 0x4c; + pkt_data_ptr[1] = 0x81; + pkt_len += 2; + } else { + pkt_len = eoc_pkt->len + 4; + pkt_data_ptr = kmalloc (pkt_len + 1 + 2, GFP_KERNEL); + memset (pkt_data_ptr, 0, pkt_len + 1 + 2); + //fill clear eoc header + pkt_data_ptr[0] = 0x1; + pkt_data_ptr[1] = 0x8; + pkt_data_ptr[2] = 0x4c; + pkt_data_ptr[3] = 0x81; + offset = 4; + } + for (swap_idx = 0; swap_idx < (eoc_pkt->len / 2) * 2; swap_idx += 2) + { + //printk("%02X %02X ",eoc_pkt->data[swap_idx],eoc_pkt->data[swap_idx+1]); + pkt_data_ptr[swap_idx + offset] = eoc_pkt->data[swap_idx + 1]; + pkt_data_ptr[swap_idx + 1 + offset] = eoc_pkt->data[swap_idx]; + } + if (eoc_pkt->len % 2) + { + //printk("%02X ",eoc_pkt->data[eoc_pkt->len-1]); + pkt_data_ptr[eoc_pkt->len - 1 + offset] = + eoc_pkt->data[eoc_pkt->len - 1]; + pkt_data_ptr[eoc_pkt->len + offset] = + eoc_pkt->data[eoc_pkt->len - 1]; + } + ret = ifx_me_hdlc_send (pkt_data_ptr, pkt_len); + + if (pkt_data_ptr != eoc_pkt->data) + { + kfree (pkt_data_ptr); + } + dev_kfree_skb (eoc_pkt); + return ret; +} + +int +get_me_ceoc_data (int pkt_len, int rx_buffer_addr, int rx_buffer_len, + u8 * data_ptr1) +{ + int ret; + MEI_ERROR dma_ret; + u16 CMVMSG[MSG_LENGTH]; + int read_size, aread_size; + int offset = 0; + u8 *data = NULL, *data_ptr = NULL; + int i, j; + int over_read = 0; + + i = j = 0; + + read_size = (pkt_len / 4) + 4; + offset = ceoc_read_idx % 4; + over_read = read_size * 4 - pkt_len - offset; + + ceoc_read_idx = (ceoc_read_idx & 0xFFFFFFFC); + + data = kmalloc (read_size * 4, GFP_KERNEL); + if (data == NULL) + goto error; + data_ptr = kmalloc (read_size * 4, GFP_KERNEL); + if (data_ptr == NULL) + goto error; + if (ceoc_read_idx + read_size * 4 >= rx_buffer_len) { + aread_size = (rx_buffer_len - ceoc_read_idx) / 4; + } + else { + aread_size = read_size; + } + + //printk("aread_size = %d,ceoc_read_idx=%d,read_size=%d,offset=%d\n",aread_size,ceoc_read_idx,read_size,offset); + dma_ret = + meiDebugRead (rx_buffer_addr + ceoc_read_idx, (u32 *) (data), + aread_size); + ceoc_read_idx += aread_size * 4; + if (aread_size != read_size) { + dma_ret = + meiDebugRead (rx_buffer_addr, + (u32 *) (data) + aread_size, + read_size - aread_size); + ceoc_read_idx = (read_size - aread_size) * 4; + } + if (ceoc_read_idx < over_read) + ceoc_read_idx = rx_buffer_len + ceoc_read_idx - over_read; + else + ceoc_read_idx -= over_read; + + if (offset == 0 || offset == 2) { + for (i = 0; i < read_size; i++) { + // 3412 --> 1234 + + for (j = 0; j < 4; j++) { + if (i * 4 + j - offset >= 0) + data_ptr[i * 4 + j - offset] = + data[i * 4 + (3 - j)]; + } + } + + } + else if (offset == 1) { + for (i = 0; i < pkt_len; i = i + 4) { + + data_ptr[i + 1] = data[i + 1]; + data_ptr[i] = data[i + 2]; + data_ptr[i + 3] = data[i + 7]; + data_ptr[i + 2] = data[i]; + } + } + else if (offset == 3) { + for (i = 0; i < pkt_len; i = i + 4) { + data_ptr[i + 1] = data[i + 7]; + data_ptr[i + 0] = data[i]; + data_ptr[i + 3] = data[i + 5]; + data_ptr[i + 2] = data[i + 6]; + } + } + if (pkt_len % 2 == 1) + data_ptr[pkt_len - 1] = data_ptr[pkt_len]; + + kfree (data); + memcpy (data_ptr1, data_ptr, pkt_len); + kfree (data_ptr); + + makeCMV (H2D_CMV_WRITE, INFO, 85, 3, 1, &ceoc_read_idx, CMVMSG); + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + goto error; + } + + return dma_ret; + error: + kfree (data); + kfree (data_ptr); + return -1; +} + +int +ifx_me_ceoc_receive (int ceoc_write_idx, int rx_buffer_len, + struct sk_buff **eoc_pkt) +{ + u16 CMVMSG[MSG_LENGTH]; + int pkt_len, ret; + u16 lsw_addr, msw_addr; + u32 rx_buffer_addr = 0; + MEI_ERROR dma_ret; + + //printk("rx_buffer_len=%d,ceoc_read_idx=%d,ceoc_write_idx=%d\n",rx_buffer_len,ceoc_read_idx,ceoc_write_idx); + if (ceoc_write_idx > ceoc_read_idx) { + pkt_len = ceoc_write_idx - ceoc_read_idx; + } + else { + pkt_len = rx_buffer_len - ceoc_read_idx + ceoc_write_idx; + } + *eoc_pkt = dev_alloc_skb (pkt_len); + if (*eoc_pkt == NULL) { + printk ("Out of memory!\n"); + ret = -ENOMEM; + goto error; + } + + makeCMV (H2D_CMV_READ, INFO, 85, 0, 1, NULL, CMVMSG); //Get HDLC packet + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + goto error; + } + lsw_addr = CMVMSG[4]; + + makeCMV (H2D_CMV_READ, INFO, 85, 1, 1, NULL, CMVMSG); //Get HDLC packet + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + goto error; + } + msw_addr = CMVMSG[4]; + rx_buffer_addr = msw_addr << 16 | lsw_addr; + dma_ret = + get_me_ceoc_data (pkt_len, rx_buffer_addr, rx_buffer_len, + (u16 *) skb_put (*eoc_pkt, pkt_len)); + if (dma_ret != MEI_SUCCESS) { + ret = -EIO; + goto error; + } + + return 0; + error: + if (*eoc_pkt != NULL) + dev_kfree_skb (*eoc_pkt); + return ret; +} + +int +ifx_mei_ceoc_rx (void) +{ + u16 CMVMSG[MSG_LENGTH]; + int rx_buffer_len, ret, pkt_len = 0; + struct sk_buff *eoc_pkt; + u16 ceoc_write_idx = 0; + + makeCMV (H2D_CMV_READ, INFO, 85, 2, 1, NULL, CMVMSG); //Get EoC packet length + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + printk ("ioctl fail!!\n"); + } + rx_buffer_len = CMVMSG[4]; + + makeCMV (H2D_CMV_READ, INFO, 85, 4, 1, NULL, CMVMSG); //Get write index + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + if (ret != 0) { + return -EIO; + } + + ceoc_write_idx = CMVMSG[4]; + ret = ifx_me_ceoc_receive (ceoc_write_idx, rx_buffer_len, &eoc_pkt); +#if defined (CONFIG_ATM_IFXMIPS) + if (ret == 0) { + skb_pull (eoc_pkt, 2); // skip 4c 81 header + ifx_push_ceoc (eoc_pkt); //pass data to higher layer + } + + return ret; +#endif +} + +static int +adsl_clear_eoc_poll (void *unused) +{ + struct task_struct *tsk = current; + + daemonize("mei_eoc_poll"); + strcpy(tsk->comm, "mei_ceoc_poll"); + sigfillset(&tsk->blocked); + + while (1) + { + MEI_WAIT_EVENT (wait_queue_hdlc_poll); + if (showtime) + ifx_mei_ceoc_rx(); + } + return 0; +} +#endif //#if defined(IFXMIPS_CLEAR_EOC) + +#ifdef IFXMIPS_CLEAR_EOC +static int +ifxmips_mei_ceoc_init (void) +{ + kernel_thread (adsl_clear_eoc_poll, NULL, + CLONE_FS | CLONE_FILES | CLONE_SIGNAL); + return 0; +} +#endif + +////////////////////// Driver Structure /////////////////////// + +/** + * Free the memory for ARC firmware + * + * \param type Free all memory or free the unused memory after showtime + * \ingroup Internal + */ +static int +free_image_buffer (int type) +{ + int idx = 0; + for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) { + printk ("meminfo[%d].type=%d,size=%ld,addr=%X\n", idx, + adsl_mem_info[idx].type, adsl_mem_info[idx].size, + (unsigned int)adsl_mem_info[idx].address); + if (type == FREE_ALL || adsl_mem_info[idx].type == type) { + if (adsl_mem_info[idx].size > 0) { + kfree (adsl_mem_info[idx].org_address); + adsl_mem_info[idx].address = 0; + adsl_mem_info[idx].size = 0; + adsl_mem_info[idx].type = 0; + adsl_mem_info[idx].nCopy = 0; + } + } + } + return 0; +} + +/** + * Allocate memory for ARC firmware + * + * \param size The number of bytes to allocate. + * \param adsl_mem_info Pointer to firmware information. + * \ingroup Internal + */ +static int +alloc_processor_memory (unsigned long size, smmu_mem_info_t * adsl_mem_info) +{ + char *mem_ptr = NULL; + char *org_mem_ptr = NULL; + int idx = 0; + long total_size = 0; + long img_size = size; + int err = 0; + + // Alloc Swap Pages + while (img_size > 0 && idx < MAX_BAR_REGISTERS) { + // skip bar15 for XDATA usage. +#ifndef DFE_LOOPBACK + if (idx == XDATA_REGISTER) + idx++; +#endif + if (idx == MAX_BAR_REGISTERS - 1) + { + //allocate 1MB memory for bar16 + org_mem_ptr = kmalloc (1024 * 1024, GFP_ATOMIC); + mem_ptr = (char*)((unsigned long) (org_mem_ptr + 1023) & 0xFFFFFC00); + adsl_mem_info[idx].size = 1024 * 1024; + } else { + org_mem_ptr = kmalloc (SDRAM_SEGMENT_SIZE, GFP_ATOMIC); + mem_ptr = (char*)((unsigned long) (org_mem_ptr + 1023) & 0xFFFFFC00); + adsl_mem_info[idx].size = SDRAM_SEGMENT_SIZE; + } + if (org_mem_ptr == NULL) + { + printk ("kmalloc memory fail!\n"); + err = -ENOMEM; + goto allocate_error; + } + adsl_mem_info[idx].address = mem_ptr; + adsl_mem_info[idx].org_address = org_mem_ptr; + + img_size -= SDRAM_SEGMENT_SIZE; + total_size += SDRAM_SEGMENT_SIZE; + printk("alloc memory idx=%d,img_size=%ld,addr=%X\n", + idx, img_size, (unsigned int)adsl_mem_info[idx].address); + idx++; + } + if (img_size > 0) + { + printk ("Image size is too large!\n"); + err = -EFBIG; + goto allocate_error; + } + err = idx; + return err; + + allocate_error: + free_image_buffer (FREE_ALL); + return err; +} + +/** + * Program the BAR registers + * + * \param nTotalBar The number of bar to program. + * \ingroup Internal + */ +static int +update_bar_register (int nTotalBar) +{ + int idx = 0; + + for (idx = 0; idx < nTotalBar; idx++) { + //skip XDATA register + if (idx == XDATA_REGISTER) + idx++; + meiLongwordWrite ( MEI_XMEM_BAR_BASE + idx * 4, + (((uint32_t) adsl_mem_info[idx]. + address) & 0x0FFFFFFF)); + printk ("BAR%d=%08X, addr=%08X\n", idx, + (((uint32_t) adsl_mem_info[idx]. + address) & 0x0FFFFFFF), + (((uint32_t) adsl_mem_info[idx].address))); + } + for (idx = nTotalBar; idx < MAX_BAR_REGISTERS; idx++) { + if (idx == XDATA_REGISTER) + idx++; + meiLongwordWrite ( MEI_XMEM_BAR_BASE + idx * 4, + (((uint32_t) adsl_mem_info[nTotalBar - 1]. + address) & 0x0FFFFFFF)); + } + + meiLongwordWrite (MEI_XMEM_BAR_BASE + XDATA_REGISTER * 4, + (((uint32_t) adsl_mem_info[XDATA_REGISTER]. + address) & 0x0FFFFFFF)); + // update MEI_XDATA_BASE_SH + printk ("update bar15 register with %08lX\n", + ((unsigned long) adsl_mem_info[XDATA_REGISTER]. + address) & 0x0FFFFFFF); + meiLongwordWrite (MEI_XDATA_BASE_SH, + ((unsigned long) adsl_mem_info[XDATA_REGISTER]. + address) & 0x0FFFFFFF); + return MEI_SUCCESS; +} + +/** + * Copy the firmware to BARs memory. + * + * \param filp Pointer to the file structure. + * \param buf Pointer to the data. + * \param size The number of bytes to copy. + * \param loff The file offset. + * \return The current file position. + * \ingroup Internal + */ +ssize_t +mei_write (MEI_file_t * filp, char *buf, size_t size, loff_t * loff) +{ + ARC_IMG_HDR img_hdr_tmp, *img_hdr; + + size_t nRead = 0, nCopy = 0; + char *mem_ptr; + ssize_t retval = -ENOMEM; + int idx = 0; + + if (*loff == 0) { + if (size < sizeof (img_hdr)) { + printk ("Firmware size is too small!\n"); + return retval; + } + copy_from_user ((char *) &img_hdr_tmp, buf, + sizeof (img_hdr_tmp)); + image_size = le32_to_cpu (img_hdr_tmp.size) + 8; // header of image_size and crc are not included. + if (image_size > 1024 * 1024) { + printk ("Firmware size is too large!\n"); + return retval; + } + // check if arc is halt + if (arc_halt_flag != 1) { + meiResetARC (); + meiHaltArc (); + } + + // reset part of PPE + *(unsigned long *) (IFXMIPS_PPE32_SRST) = 0xC30; + *(unsigned long *) (IFXMIPS_PPE32_SRST) = 0xFFF; + + free_image_buffer (FREE_ALL); //free all + + retval = alloc_processor_memory (image_size, adsl_mem_info); + if (retval < 0) { + printk ("Error: No memory space left.\n"); + goto error; + } + + for (idx = 0; idx < retval; idx++) { + //skip XDATA register + if (idx == XDATA_REGISTER) + idx++; + if (idx * SDRAM_SEGMENT_SIZE < + le32_to_cpu (img_hdr_tmp.page[0].p_offset)) { + adsl_mem_info[idx].type = FREE_RELOAD; + } + else { + adsl_mem_info[idx].type = FREE_SHOWTIME; + } + + } + nBar = retval; + + img_hdr = (ARC_IMG_HDR *) adsl_mem_info[0].address; + +#if !defined(__LINUX__) + adsl_mem_info[XDATA_REGISTER].org_address = + kmalloc (SDRAM_SEGMENT_SIZE + 1023, GFP_ATOMIC); +#else + adsl_mem_info[XDATA_REGISTER].org_address = + kmalloc (SDRAM_SEGMENT_SIZE, GFP_ATOMIC); +#endif + adsl_mem_info[XDATA_REGISTER].address = + (char + *) ((unsigned long) (adsl_mem_info[XDATA_REGISTER]. + org_address + + 1023) & 0xFFFFFC00); + adsl_mem_info[XDATA_REGISTER].size = SDRAM_SEGMENT_SIZE; + if (adsl_mem_info[XDATA_REGISTER].address == NULL) { + printk ("kmalloc memory fail!\n"); + retval = -ENOMEM; + goto error; + } + adsl_mem_info[XDATA_REGISTER].type = FREE_RELOAD; + update_bar_register (nBar); + + } + else if (image_size == 0) { + printk ("Error: Firmware size=0! \n"); + goto error; + } + else { + if (arc_halt_flag == 0) { + printk + ("Please download the firmware from the beginning of the firmware!\n"); + goto error; + } + } + + nRead = 0; + while (nRead < size) { + long offset = ((long) (*loff) + nRead) % SDRAM_SEGMENT_SIZE; + idx = (((long) (*loff)) + nRead) / SDRAM_SEGMENT_SIZE; + mem_ptr = (char *) + KSEG1ADDR ((unsigned long) (adsl_mem_info[idx]. + address) + offset); + if ((size - nRead + offset) > SDRAM_SEGMENT_SIZE) + nCopy = SDRAM_SEGMENT_SIZE - offset; + else + nCopy = size - nRead; + copy_from_user (mem_ptr, buf + nRead, nCopy); +#ifdef IMAGE_SWAP + for (offset = 0; offset < (nCopy / 4); offset++) { + ((unsigned long *) mem_ptr)[offset] = + le32_to_cpu (((unsigned long *) + mem_ptr)[offset]); + } +#endif //IMAGE_SWAP + nRead += nCopy; + adsl_mem_info[idx].nCopy += nCopy; + } + +#if ( defined(HEADER_SWAP) && !defined(IMAGE_SWAP)) || (defined(IMAGE_SWAP) && !defined(HEADER_SWAP)) + if (*loff == 0) { + + for (idx = 0; + idx < + (sizeof (ARC_IMG_HDR) + + (le32_to_cpu (img_hdr_tmp.count) - + 1) * sizeof (ARC_SWP_PAGE_HDR)) / 4; idx++) { + ((unsigned long *) img_hdr)[idx] = + le32_to_cpu (((unsigned long *) + img_hdr)[idx]); + } + } +#endif //( defined(HEADER_SWAP) && !defined(IMAGE_SWAP)) || (defined(IMAGE_SWAP) && !defined(HEADER_SWAP)) + printk ("size=%X,loff=%08X\n", size, (unsigned int) *loff); + + *loff += size; + return size; + error: + free_image_buffer (FREE_ALL); + + return retval; +} + +/******************************************************** + * L3 Power Mode * + ********************************************************/ +/** + * Send a CMV message. + * This function sends a CMV message to ARC + * + * \param opcode The message opcode + * \param group The message group number + * \param address The message address. + * \param index The message index. + * \param size The number of words to read/write. + * \param data The pointer to data. + * \param CMVMSG The pointer to message buffer. + * \return 0: success + * \ingroup Internal + */ +int +send_cmv (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data, u16 * CMVMSG) +{ + int ret; + + makeCMV(opcode, group, address, index, size, data, CMVMSG); + ret = mei_ioctl((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, (unsigned long)CMVMSG); + return ret; +} + +#ifdef IFX_ADSL_L3_MODE_SUPPORT + +/** + * Check the L3 request from CO + * This function Check if CPE received the L3 request from CO + * \return 1: got L3 request. + * \ingroup Internal + */ +int +check_co_l3_shutdown_request (void) +{ + u16 CMVMSG[MSG_LENGTH]; + if (modem_ready == 1) { + if (send_cmv (H2D_CMV_READ, STAT, 4, 0, 1, NULL, CMVMSG) != 0) { + return -EBUSY; + } + if (CMVMSG[4] & BIT14) { + return 1; + } + } + return 0; +} + +/** + * Check the L3 status + * This function get the CPE Power Management Mode status + * \return 0: L0 Mode + * 2: L2 Mode + * 3: L3 Mode + * \ingroup Internal + */ +int +get_l3_power_status (void) +{ + u16 CMVMSG[MSG_LENGTH]; + if (modem_ready == 0) { + return L3_POWER_MODE; + } + else { + if (send_cmv (H2D_CMV_READ, STAT, 18, 0, 1, NULL, CMVMSG) != + 0) { + return -EBUSY; + } + return ((int) CMVMSG[4]); + + } + return 0; +} + +/** + * Send a L3 request to CO + * This function send a L3 request to CO and check the CO response. + * \return 0: Success. Others: Fail. + * \ingroup Internal + */ +int +send_l3_shutdown_cmd (void) +{ + u16 cmd = 0x1; + int nRetry = 0; + u16 CMVMSG[MSG_LENGTH]; + + if (modem_ready == 0) { + return -EBUSY; + } + // send l3 request to CO + if (send_cmv (H2D_CMV_WRITE, CNTL, 3, 0, 1, &cmd, CMVMSG) != 0) { + return -EBUSY; + } + retry: + MEI_WAIT (10); + + // check CO response + if (send_cmv (H2D_CMV_READ, STAT, 20, 0, 1, NULL, CMVMSG) != 0) { + return -EBUSY; + } + if (CMVMSG[4] == 0) { + nRetry++; + if (nRetry < 10) { + goto retry; + } + else { + return -EBUSY; + } + + } + else if (CMVMSG[4] == 1) // reject + { + return -EPERM; + } + else if (CMVMSG[4] == 2) // ok + { + return 0; + } + else if (CMVMSG[4] == 3) // failure + { + return -EAGAIN; + } + return 0; +} + +/** + * Enable L3 Power Mode + * This function send a L3 request to CO and check the CO response. Then reboot the CPE to enter L3 Mode. + * \return 0: Success. Others: Fail. + * \ingroup Internal + */ +int +set_l3_shutdown (void) +{ + int ret = 0; + if (l3_shutdown == 0) { + // send l3 request to CO + ret = send_l3_shutdown_cmd (); + if (ret == 0) //got CO ACK + { + //reboot adsl and block autoboot daemon + ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_REBOOT, (unsigned long)NULL); + l3_shutdown = 1; + } + } + return ret; +} + +/** + * Disable L3 Power Mode + * This function disable L3 Mode and wake up the autoboot daemon. + * \return 0: Success. + * \ingroup Internal + */ +//l3 power mode disable +int +set_l3_power_on (void) +{ + if (l3_shutdown == 1) { + l3_shutdown = 0; + // wakeup autoboot daemon + MEI_WAKEUP_EVENT (wait_queue_l3); + + } + return 0; +} + +/******************************************************** + * End of L3 Power Mode * + ********************************************************/ +#endif //IFX_ADSL_L3_MODE_SUPPORT + +#ifdef CONFIG_IFXMIPS_MEI_LED +/* + * LED Initialization function + */ +int +meiADSLLedInit (void) +{ + u16 data = 0x0600; + u16 CMVMSG[MSG_LENGTH]; + + data = 0x0400; +#if defined(DATA_LED_SUPPORT) && defined (DATA_LED_ADSL_FW_HANDLE) + data |= 0x200; +#endif + // Setup ADSL Link/Data LED + if (send_cmv (H2D_CMV_WRITE, INFO, 91, 0, 1, &data, CMVMSG) != 0) { + return -EBUSY; + } + + if (send_cmv (H2D_CMV_WRITE, INFO, 91, 2, 1, &data, CMVMSG) != 0) { + return -EBUSY; + } + + // Let FW to handle ADSL Link LED + data = 0x0a03; //invert the LED signal as per input from Stefan on 13/11/2006 + if (send_cmv (H2D_CMV_WRITE, INFO, 91, 4, 1, &data, CMVMSG) != 0) { + return -EBUSY; + } + +#ifdef DATA_LED_SUPPORT +#ifdef DATA_LED_ADSL_FW_HANDLE + + // Turn ADSL Data LED on + data = 0x0900; + if (send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG) != 0) { + return -EBUSY; + } +#else + ifxmips_led_set(0x1); +#endif +#endif + return 0; +} +#endif + +#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT +/* + * Dual Latency Path Initialization function + */ +int +meiDualLatencyInit (void) +{ + u16 nDual = 0; + u16 CMVMSG[MSG_LENGTH]; + + // setup up stream path + if (bDualLatency & DUAL_LATENCY_US_ENABLE) { + nDual = 2; + } + else { + nDual = 1; + } + + if (send_cmv (H2D_CMV_WRITE, CNFG, 10, 0, 1, &nDual, CMVMSG) != 0) { + return -EBUSY; + } + + if (send_cmv (H2D_CMV_WRITE, CNFG, 11, 0, 1, &nDual, CMVMSG) != 0) { + return -EBUSY; + } + + // setup down stream path + if (bDualLatency & DUAL_LATENCY_DS_ENABLE) { + nDual = 2; + } + else { + nDual = 1; + } + + if (send_cmv (H2D_CMV_WRITE, CNFG, 21, 0, 1, &nDual, CMVMSG) != 0) { + return -EBUSY; + } + if (send_cmv (H2D_CMV_WRITE, CNFG, 22, 0, 1, &nDual, CMVMSG) != 0) { + return -EBUSY; + } + return 0; +} + +int +mei_is_dual_latency_enabled (void) +{ + return bDualLatency; +} +#endif + +int +meiAdslStartupInit (void) +{ +#ifdef CONFIG_IFXMIPS_MEI_LED + meiADSLLedInit (); +#endif +#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT + meiDualLatencyInit (); +#endif + return 0; +} + +/** + * MEI IO controls for user space accessing + * + * \param ino Pointer to the stucture of inode. + * \param fil Pointer to the stucture of file. + * \param command The ioctl command. + * \param lon The address of data. + * \return Success or failure. + * \ingroup Internal + */ +int +mei_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command, + unsigned long lon) +{ + int i; + + int meierr = MEI_SUCCESS; + meireg regrdwr; + meidebug debugrdwr; + u32 arc_debug_data, reg_data; +#ifdef IFXMIPS_CLEAR_EOC + u16 data; + struct sk_buff *eoc_skb; +#endif //IFXMIPS_CLEAR_EOC + u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4))); + u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4))); + + int from_kernel = 0; //joelin + if (ino == (MEI_inode_t *) 0) + from_kernel = 1; //joelin + if (command < IFXMIPS_MEI_START) { +#ifdef CONFIG_IFXMIPS_MEI_MIB + return mei_mib_ioctl (ino, fil, command, lon); +#endif //CONFIG_IFXMIPS_MEI_MIB + + if (command == IFXMIPS_MIB_LO_ATUR + || command == IFXMIPS_MIB_LO_ATUC) + return MEI_SUCCESS; + printk + ("No such ioctl command (0x%X)! MEI ADSL MIB is not supported!\n", + command); + return -ENOIOCTLCMD; + } + else { + switch (command) { + case IFXMIPS_MEI_START: + + showtime = 0; + loop_diagnostics_completed = 0; + if (time_disconnect.tv_sec == 0) + do_gettimeofday (&time_disconnect); + + if (MEI_MUTEX_LOCK (mei_sema)) //disable CMV access until ARC ready + { + printk ("-ERESTARTSYS\n"); + return -ERESTARTSYS; + } + + meiMailboxInterruptsDisable (); //disable all MEI interrupts + if (mei_arc_swap_buff == NULL) { + mei_arc_swap_buff = + (u32 *) kmalloc (MAXSWAPSIZE * 4, + GFP_KERNEL); + if (mei_arc_swap_buff == NULL) { + printk + ("\n\n malloc fail for codeswap buff"); + meierr = MEI_FAILURE; + } + } + if (meiRunAdslModem () != MEI_SUCCESS) { + printk + ("meiRunAdslModem() error..."); + meierr = MEI_FAILURE; + } +#ifdef IFX_ADSL_L3_MODE_SUPPORT + /* L3 Power Mode Start */ + if (l3_shutdown == 1) { + // block autoboot daemon until l3 power mode disable + MEI_WAIT_EVENT (wait_queue_l3); + } + /* L3 Power Mode End */ +#endif //IFX_ADSL_L3_MODE_SUPPORT + if (autoboot_enable_flag) + meiAdslStartupInit (); + break; + + case IFXMIPS_MEI_SHOWTIME: + if (MEI_MUTEX_LOCK (mei_sema)) + return -ERESTARTSYS; + + do_gettimeofday (&time_showtime); + unavailable_seconds += + time_showtime.tv_sec - time_disconnect.tv_sec; + time_disconnect.tv_sec = 0; + makeCMV (H2D_CMV_READ, RATE, 0, 0, 4, NULL, TxMessage); //maximum allowed tx message length, in bytes + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != + MEI_SUCCESS) { + printk + ("\n\nCMV fail, Group RAGE Address 0 Index 0"); + } + else { + u32 rate_fast; + u32 rate_intl; + rate_intl = RxMessage[4] | RxMessage[5] << 16; + rate_fast = RxMessage[6] | RxMessage[7] << 16; + // 609251:tc.chen Fix ATM QoS issue start + if (rate_intl && rate_fast) // apply cell rate to each path + { +#ifdef CONFIG_ATM_IFXMIPS + ifx_atm_set_cell_rate (1, + rate_intl / + (53 * 8)); + ifx_atm_set_cell_rate (0, + rate_fast / + (53 * 8)); +#endif + } + else if (rate_fast) // apply fast path cell rate to atm interface 0 + { +#ifdef CONFIG_ATM_IFXMIPS + ifx_atm_set_cell_rate (0, + rate_fast / + (53 * 8)); +#endif + } + else if (rate_intl) // apply interleave path cell rate to atm interface 0 + { +#ifdef CONFIG_ATM_IFXMIPS + ifx_atm_set_cell_rate (0, + rate_intl / + (53 * 8)); +#endif + } + else { + printk ("Got rate fail.\n"); + } + // 609251:tc.chen end + } + +#ifdef IFXMIPS_CLEAR_EOC + data = 1; + makeCMV (H2D_CMV_WRITE, OPTN, 24, 0, 1, &data, + TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != + MEI_SUCCESS) { + printk ("Enable clear eoc fail!\n"); + } +#endif + // read adsl mode + makeCMV (H2D_CMV_READ, STAT, 1, 0, 1, NULL, + TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != + MEI_SUCCESS) { +#ifdef IFXMIPS_MEI_DEBUG_ON + printk ("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + } + adsl_mode = RxMessage[4]; + makeCMV (H2D_CMV_READ, STAT, 17, 0, 1, NULL, + TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != + MEI_SUCCESS) { +#ifdef IFXMIPS_MEI_DEBUG_ON + printk ("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + } + adsl_mode_extend = RxMessage[4]; +#ifdef CONFIG_IFXMIPS_MEI_MIB + mei_mib_adsl_link_up (); +#endif + +//joelin 04/16/2005-start + makeCMV (H2D_CMV_WRITE, PLAM, 10, 0, 1, + &unavailable_seconds, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != + MEI_SUCCESS) { + printk + ("\n\nCMV fail, Group 7 Address 10 Index 0"); + } + +//joelin 04/16/2005-end + showtime = 1; + free_image_buffer (FREE_SHOWTIME); + MEI_MUTEX_UNLOCK (mei_sema); + break; + + case IFXMIPS_MEI_HALT: + if (arc_halt_flag == 0) { + meiResetARC (); + meiHaltArc (); + } + break; + case IFXMIPS_MEI_RUN: + if (arc_halt_flag == 1) { + meiRunArc (); + } + break; + case IFXMIPS_MEI_CMV_WINHOST: + if (MEI_MUTEX_LOCK (mei_sema)) + return -ERESTARTSYS; + + if (!from_kernel) + copy_from_user ((char *) TxMessage, (char *) lon, MSG_LENGTH * 2); //joelin + else + memcpy (TxMessage, (char *) lon, + MSG_LENGTH * 2); + + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != + MEI_SUCCESS) { + printk + ("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n", + TxMessage[0], TxMessage[1], + TxMessage[2], TxMessage[3], + RxMessage[0], RxMessage[1], + RxMessage[2], RxMessage[3], + RxMessage[4]); + meierr = MEI_FAILURE; + } + else { + if (!from_kernel) //joelin + copy_to_user ((char *) lon, + (char *) RxMessage, + MSG_LENGTH * 2); + else + memcpy ((char *) lon, + (char *) RxMessage, + MSG_LENGTH * 2); + } + + MEI_MUTEX_UNLOCK (mei_sema); + break; +#ifdef IFXMIPS_MEI_CMV_EXTRA + case IFXMIPS_MEI_CMV_READ: + copy_from_user ((char *) (®rdwr), (char *) lon, + sizeof (meireg)); + meiLongwordRead ((u32*)regrdwr.iAddress, &(regrdwr.iData)); + + copy_to_user((char *) lon, (char *) (®rdwr), sizeof (meireg)); + break; + + case IFXMIPS_MEI_CMV_WRITE: + copy_from_user ((char *) (®rdwr), (char *) lon, sizeof (meireg)); + meiLongwordWrite ((u32*)regrdwr.iAddress, regrdwr.iData); + break; + + case IFXMIPS_MEI_REMOTE: + copy_from_user ((char *) (&i), (char *) lon, + sizeof (int)); + if (i == 0) { + meiMailboxInterruptsEnable (); + + MEI_MUTEX_UNLOCK (mei_sema); + } + else if (i == 1) { + meiMailboxInterruptsDisable (); + if (MEI_MUTEX_LOCK (mei_sema)) + return -ERESTARTSYS; + } + else { + printk + ("\n\n IFXMIPS_MEI_REMOTE argument error"); + meierr = MEI_FAILURE; + } + break; + + case IFXMIPS_MEI_READDEBUG: + case IFXMIPS_MEI_WRITEDEBUG: +#if 0 //tc.chen:It is no necessary to acquire lock to read debug memory!! + if (MEI_MUTEX_LOCK (mei_sema)) + return -ERESTARTSYS; +#endif + if (!from_kernel) + copy_from_user ((char *) (&debugrdwr), + (char *) lon, + sizeof (debugrdwr)); + else + memcpy ((char *) (&debugrdwr), (char *) lon, + sizeof (debugrdwr)); + + if (command == IFXMIPS_MEI_READDEBUG) + meiDebugRead (debugrdwr.iAddress, + debugrdwr.buffer, + debugrdwr.iCount); + else + meiDebugWrite (debugrdwr.iAddress, + debugrdwr.buffer, + debugrdwr.iCount); + + if (!from_kernel) + copy_to_user ((char *) lon, (char *) (&debugrdwr), sizeof (debugrdwr)); //dying gasp +#if 0 //tc.chen:It is no necessary to acquire lock to read debug memory!! + MEI_MUTEX_UNLOCK (mei_sema); +#endif + break; + case IFXMIPS_MEI_RESET: + case IFXMIPS_MEI_REBOOT: + +#ifdef CONFIG_IFXMIPS_MEI_MIB + mei_mib_adsl_link_down (); +#endif + +#ifdef IFX_ADSL_L3_MODE_SUPPORT + /* L3 Power Mode start */ + if (check_co_l3_shutdown_request () == 1) //co request + { + // cpe received co L3 request + l3_shutdown = 1; + } + /* L3 Power Mode end */ +#endif //IFX_ADSL_L3_MODE_SUPPORT + + meiResetARC (); + meiControlModeSwitch (MEI_MASTER_MODE); + //enable ac_clk signal + _meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, + CRI_CCR0, &arc_debug_data); + arc_debug_data |= ACL_CLK_MODE_ENABLE; + _meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, + CRI_CCR0, arc_debug_data); + meiControlModeSwitch (JTAG_MASTER_MODE); + meiHaltArc (); + update_bar_register (nBar); + break; + case IFXMIPS_MEI_DOWNLOAD: + // DMA the boot code page(s) + printk ("Start download pages"); + meiDownloadBootPages (); + break; +#endif //IFXMIPS_MEI_CMV_EXTRA + //for clearEoC +#ifdef IFXMIPS_CLEAR_EOC + case IFXMIPS_MEI_EOC_SEND: + if (!showtime) { + return -EIO; + } + if (!from_kernel) { + copy_from_user ((char *) (&debugrdwr), + (char *) lon, + sizeof (debugrdwr)); + eoc_skb = + dev_alloc_skb (debugrdwr.iCount * 4); + if (eoc_skb == NULL) { + printk + ("\n\nskb alloc fail"); + break; + } + + eoc_skb->len = debugrdwr.iCount * 4; + memcpy (skb_put + (eoc_skb, debugrdwr.iCount * 4), + (char *) debugrdwr.buffer, + debugrdwr.iCount * 4); + } + else { + eoc_skb = (struct sk_buff *) lon; + } + ifx_me_ceoc_send (eoc_skb); //pass data to higher layer + break; +#endif // IFXMIPS_CLEAR_EOC + case IFXMIPS_MEI_JTAG_ENABLE: + printk ("ARC JTAG Enable.\n"); + *(IFXMIPS_GPIO_P0_DIR) = (*IFXMIPS_GPIO_P0_DIR) & (~0x800); // set gpio11 to input + *(IFXMIPS_GPIO_P0_ALTSEL0) = ((*IFXMIPS_GPIO_P0_ALTSEL0) & (~0x800)); + *(IFXMIPS_GPIO_P0_ALTSEL1) = ((*IFXMIPS_GPIO_P0_ALTSEL1) & (~0x800)); + *IFXMIPS_GPIO_P0_OD = (*IFXMIPS_GPIO_P0_OD) | 0x800; + + //enable ARC JTAG + meiLongwordRead(IFXMIPS_RCU_REQ, ®_data); + meiLongwordWrite(IFXMIPS_RCU_REQ, reg_data | IFXMIPS_RCU_RST_REQ_ARC_JTAG); + break; + + case GET_ADSL_LOOP_DIAGNOSTICS_MODE: + copy_to_user ((char *) lon, (char *) &loop_diagnostics_mode, sizeof(int)); + break; + case LOOP_DIAGNOSTIC_MODE_COMPLETE: + loop_diagnostics_completed = 1; +#ifdef CONFIG_IFXMIPS_MEI_MIB + // read adsl mode + makeCMV (H2D_CMV_READ, STAT, 1, 0, 1, NULL, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) { +#ifdef IFXMIPS_MEI_DEBUG_ON + printk ("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + } + adsl_mode = RxMessage[4]; + + makeCMV (H2D_CMV_READ, STAT, 17, 0, 1, NULL, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) { +#ifdef IFXMIPS_MEI_DEBUG_ON + printk ("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + } + adsl_mode_extend = RxMessage[4]; +#endif + MEI_WAKEUP_EVENT (wait_queue_loop_diagnostic); + break; + case SET_ADSL_LOOP_DIAGNOSTICS_MODE: + if (lon != loop_diagnostics_mode) { + loop_diagnostics_completed = 0; + loop_diagnostics_mode = lon; +#if 0 //08/12/2006 tc.chen : autoboot daemon should reset dsl + mei_ioctl ((MEI_inode_t *) 0, NULL, + IFXMIPS_MEI_REBOOT, + (unsigned long) NULL); +#endif + } + break; + case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE: + copy_to_user ((char *) lon, + (char *) &loop_diagnostics_completed, + sizeof (int)); + break; +#ifdef IFX_ADSL_L3_MODE_SUPPORT + /* L3 Power Mode Start */ + case GET_POWER_MANAGEMENT_MODE: + i = get_l3_power_status (); + copy_to_user ((char *) lon, (char *) &i, + sizeof (int)); + break; + case SET_L3_POWER_MODE: + i = 1; + copy_from_user ((char *) &i, (char *) lon, + sizeof (int)); + if (i == 0) { + return set_l3_shutdown (); + } + else { + return set_l3_power_on (); + } + break; + /* L3 Power Mode End */ +#endif //IFX_ADSL_L3_MODE_SUPPORT +#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT + case GET_ADSL_DUAL_LATENCY: + i = mei_is_dual_latency_enabled (); + if (i < 0) + return i; + copy_to_user ((char *) lon, (char *) &i, + sizeof (int)); + break; + case SET_ADSL_DUAL_LATENCY: + i = 0; + copy_from_user ((char *) &i, (char *) lon, + sizeof (int)); + if (i > DUAL_LATENCY_US_DS_ENABLE) { + return -EINVAL; + } + if (i != bDualLatency) { + bDualLatency = i; + i = 1; // DualLatency update,need to reboot arc + } + else { + i = 0; // DualLatency is the same + } + if (modem_ready && i) // modem is already start, reboot arc to apply Dual Latency changed + { + mei_ioctl ((MEI_inode_t *) 0, NULL, + IFXMIPS_MEI_REBOOT, + (unsigned long) NULL); + } + break; + +#endif + case QUIET_MODE_GET: + copy_to_user ((char *) lon, (char *) &quiet_mode_flag, + sizeof (int)); + break; + case QUIET_MODE_SET: + copy_from_user ((char *) &i, (char *) lon, + sizeof (int)); + if (i > 1 || i < 0) + return -EINVAL; + if (i == 1) { + u16 CMVMSG[MSG_LENGTH]; + u16 data = 0; + makeCMV (H2D_CMV_WRITE, INFO, 94, 0, 1, &data, CMVMSG); // set tx power to 0 + meierr = mei_ioctl ((struct inode *) 0, NULL, + IFXMIPS_MEI_CMV_WINHOST, + (unsigned long) CMVMSG); + } + quiet_mode_flag = i; + break; + case SHOWTIME_LOCK_GET: + copy_to_user ((char *) lon, + (char *) &showtime_lock_flag, + sizeof (int)); + break; + case SHOWTIME_LOCK_SET: + copy_from_user ((char *) &i, (char *) lon, + sizeof (int)); + if (i > 1 || i < 0) + return -EINVAL; + showtime_lock_flag = i; + break; + case AUTOBOOT_ENABLE_SET: + copy_from_user ((char *) &i, (char *) lon, + sizeof (int)); + if (i > 1 || i < 0) + return -EINVAL; + autoboot_enable_flag = i; + break; + default: + printk + ("The ioctl command(0x%X is not supported!\n", + command); + meierr = -ENOIOCTLCMD; + } + } + return meierr; +} //mei_ioctl + +//////////////////// procfs debug /////////////////////////// + +#ifdef CONFIG_PROC_FS +static int +proc_read (struct file *file, char *buf, size_t nbytes, loff_t * ppos) +{ + int i_ino = (file->f_dentry->d_inode)->i_ino; + char outputbuf[64]; + int count = 0; + int i; + u32 version = 0; + reg_entry_t *current_reg = NULL; + u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4))); + u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4))); + + for (i = 0; i < NUM_OF_REG_ENTRY; i++) { + if (regs[i].low_ino == i_ino) { + current_reg = ®s[i]; + break; + } + } + if (current_reg == NULL) + return -EINVAL; + + if (current_reg->flag == (int *) 8) { + ///proc/mei/version + //format: + //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl + ///Firmware Date Time Code: date/month min:hour + if (*ppos > 0) /* Assume reading completed in previous read */ + return 0; // indicates end of file + if (MEI_MUTEX_LOCK (mei_sema)) + return -ERESTARTSYS; + + if (indicator_count < 1) { + MEI_MUTEX_UNLOCK (mei_sema); + return -EAGAIN; + } + //major:bits 0-7 + //minor:bits 8-15 + makeCMV (H2D_CMV_READ, INFO, 54, 0, 1, NULL, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) { + MEI_MUTEX_UNLOCK (mei_sema); + return -EIO; + } + version = RxMessage[4]; + count = sprintf (outputbuf, "%d.%d.", (version) & 0xff, + (version >> 8) & 0xff); + + //sub_version:bits 4-7 + //int_version:bits 0-3 + //spl_appl:bits 8-13 + //rel_state:bits 14-15 + makeCMV (H2D_CMV_READ, INFO, 54, 1, 1, NULL, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) { + MEI_MUTEX_UNLOCK (mei_sema); + return -EFAULT; + } + version = RxMessage[4]; + count += sprintf (outputbuf + count, "%d.%d.%d.%d", + (version >> 4) & 0xf, + version & 0xf, + (version >> 14) & 0x3, + (version >> 8) & 0x3f); + //Date:bits 0-7 + //Month:bits 8-15 + makeCMV (H2D_CMV_READ, INFO, 55, 0, 1, NULL, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) { + MEI_MUTEX_UNLOCK (mei_sema); + return -EIO; + } + version = RxMessage[4]; + + //Hour:bits 0-7 + //Minute:bits 8-15 + makeCMV (H2D_CMV_READ, INFO, 55, 1, 1, NULL, TxMessage); + if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) { + MEI_MUTEX_UNLOCK (mei_sema); + return -EFAULT; + } + version += (RxMessage[4] << 16); + count += sprintf (outputbuf + count, " %d/%d %d:%d\n", + version & 0xff, (version >> 8) & 0xff, + (version >> 25) & 0xff, + (version >> 16) & 0xff); + MEI_MUTEX_UNLOCK (mei_sema); + + *ppos += count; + } + else if (current_reg->flag != (int *) Recent_indicator) { + if (*ppos > 0) /* Assume reading completed in previous read */ + return 0; // indicates end of file + count = sprintf (outputbuf, "0x%08X\n\n", + *(current_reg->flag)); + *ppos += count; + if (count > nbytes) /* Assume output can be read at one time */ + return -EINVAL; + } + else { + if ((int) (*ppos) / ((int) 7) == 16) + return 0; // indicate end of the message + count = sprintf (outputbuf, "0x%04X\n\n", + *(((u16 *) (current_reg->flag)) + + (int) (*ppos) / ((int) 7))); + *ppos += count; + } + if (copy_to_user (buf, outputbuf, count)) + return -EFAULT; + return count; +} + +static ssize_t +proc_write (struct file *file, const char *buffer, size_t count, + loff_t * ppos) +{ + int i_ino = (file->f_dentry->d_inode)->i_ino; + reg_entry_t *current_reg = NULL; + int i; + unsigned long newRegValue; + char *endp; + + for (i = 0; i < NUM_OF_REG_ENTRY; i++) { + if (regs[i].low_ino == i_ino) { + current_reg = ®s[i]; + break; + } + } + if ((current_reg == NULL) + || (current_reg->flag == (int *) Recent_indicator)) + return -EINVAL; + + newRegValue = simple_strtoul (buffer, &endp, 0); + *(current_reg->flag) = (int) newRegValue; + return (count + endp - buffer); +} +#endif //CONFIG_PROC_FS + +//TODO, for loopback test +#ifdef DFE_LOOPBACK +#define mte_reg_base (0x4800*4+0x20000) + +/* Iridia Registers Address Constants */ +#define MTE_Reg(r) (int)(mte_reg_base + (r*4)) + +#define IT_AMODE MTE_Reg(0x0004) + +#define OMBOX_BASE 0xDF80 +#define OMBOX1 (OMBOX_BASE+0x4) +#define IMBOX_BASE 0xDFC0 + +#define TIMER_DELAY (1024) +#define BC0_BYTES (32) +#define BC1_BYTES (30) +#define NUM_MB (12) +#define TIMEOUT_VALUE 2000 + +static void +BFMWait (u32 cycle) +{ + u32 i; + for (i = 0; i < cycle; i++); +} + +static void +WriteRegLong (u32 addr, u32 data) +{ + //*((volatile u32 *)(addr)) = data; + IFXMIPS_WRITE_REGISTER_L (data, addr); +} + +static u32 +ReadRegLong (u32 addr) +{ + // u32 rd_val; + //rd_val = *((volatile u32 *)(addr)); + // return rd_val; + return IFXMIPS_READ_REGISTER_L (addr); +} + +/* This routine writes the mailbox with the data in an input array */ +static void +WriteMbox (u32 * mboxarray, u32 size) +{ + meiDebugWrite (IMBOX_BASE, mboxarray, size); + printk ("write to %X\n", IMBOX_BASE); + meiLongwordWrite ( MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV); +} + +/* This routine reads the output mailbox and places the results into an array */ +static void +ReadMbox (u32 * mboxarray, u32 size) +{ + meiDebugRead (OMBOX_BASE, mboxarray, size); + printk ("read from %X\n", OMBOX_BASE); +} + +static void +MEIWriteARCValue (u32 address, u32 value) +{ + u32 i, check = 0; + + /* Write address register */ + IFXMIPS_WRITE_REGISTER_L (address, MEI_DEBUG_WAD); + + /* Write data register */ + IFXMIPS_WRITE_REGISTER_L (value, MEI_DEBUG_DATA); + + /* wait until complete - timeout at 40 */ + for (i = 0; i < 40; i++) { + check = IFXMIPS_READ_REGISTER_L (ARC_TO_MEI_INT); + + if ((check & ARC_TO_MEI_DBG_DONE)) + break; + } + /* clear the flag */ + IFXMIPS_WRITE_REGISTER_L (ARC_TO_MEI_DBG_DONE, ARC_TO_MEI_INT); +} + +void +arc_code_page_download (uint32_t arc_code_length, uint32_t * start_address) +{ + int count; + printk ("try to download pages,size=%d\n", arc_code_length); + meiControlModeSwitch (MEI_MASTER_MODE); + if (arc_halt_flag == 0) { + meiHaltArc (); + } + meiLongwordWrite ( MEI_XFR_ADDR, 0); + for (count = 0; count < arc_code_length; count++) { + meiLongwordWrite ( MEI_DATA_XFR, + *(start_address + count)); + } + meiControlModeSwitch (JTAG_MASTER_MODE); +} +static int +load_jump_table (unsigned long addr) +{ + int i; + uint32_t addr_le, addr_be; + uint32_t jump_table[32]; + for (i = 0; i < 16; i++) { + addr_le = i * 8 + addr; + addr_be = ((addr_le >> 16) & 0xffff); + addr_be |= ((addr_le & 0xffff) << 16); + jump_table[i * 2 + 0] = 0x0f802020; + jump_table[i * 2 + 1] = addr_be; + //printk("jt %X %08X %08X\n",i,jump_table[i*2+0],jump_table[i*2+1]); + } + arc_code_page_download (32, &jump_table[0]); + return 0; +} + +void +dfe_loopback_irq_handler (void) +{ + uint32_t rd_mbox[10]; + + memset (&rd_mbox[0], 0, 10 * 4); + ReadMbox (&rd_mbox[0], 6); + if (rd_mbox[0] == 0x0) { + printk ("Get ARC_ACK\n"); + got_int = 1; + } + else if (rd_mbox[0] == 0x5) { + printk ("Get ARC_BUSY\n"); + got_int = 2; + } + else if (rd_mbox[0] == 0x3) { + printk ("Get ARC_EDONE\n"); + if (rd_mbox[1] == 0x0) { + got_int = 3; + printk ("Get E_MEMTEST\n"); + if (rd_mbox[2] != 0x1) { + got_int = 4; + printk ("Get Result %X\n", + rd_mbox[2]); + } + } + } + meiLongwordWrite ( ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE); + MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT); + disable_irq (IFXMIPS_MEI_INT); + //got_int = 1; + return; +} + +static void +wait_mem_test_result (void) +{ + uint32_t mbox[5]; + mbox[0] = 0; + printk ("Waiting Starting\n"); + while (mbox[0] == 0) { + ReadMbox (&mbox[0], 5); + } + printk ("Try to get mem test result.\n"); + ReadMbox (&mbox[0], 5); + if (mbox[0] == 0xA) { + printk ("Success.\n"); + } + else if (mbox[0] == 0xA) { + printk + ("Fail,address %X,except data %X,receive data %X\n", + mbox[1], mbox[2], mbox[3]); + } + else { + printk ("Fail\n"); + } +} + +static int +arc_ping_testing (void) +{ +#define MEI_PING 0x00000001 + uint32_t wr_mbox[10], rd_mbox[10]; + int i; + for (i = 0; i < 10; i++) { + wr_mbox[i] = 0; + rd_mbox[i] = 0; + } + + printk ("send ping msg\n"); + wr_mbox[0] = MEI_PING; + WriteMbox (&wr_mbox[0], 10); + + while (got_int == 0) { + MEI_WAIT (100); + } + + printk ("send start event\n"); + got_int = 0; + + wr_mbox[0] = 0x4; + wr_mbox[1] = 0; + wr_mbox[2] = 0; + wr_mbox[3] = (uint32_t) 0xf5acc307e; + wr_mbox[4] = 5; + wr_mbox[5] = 2; + wr_mbox[6] = 0x1c000; + wr_mbox[7] = 64; + wr_mbox[8] = 0; + wr_mbox[9] = 0; + WriteMbox (&wr_mbox[0], 10); + enable_irq (IFXMIPS_MEI_INT); + //printk("meiMailboxWrite ret=%d\n",i); + meiLongwordWrite ( MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV); + printk ("sleeping\n"); + while (1) { + if (got_int > 0) { + + if (got_int > 3) + printk ("got_int >>>> 3\n"); + else + printk ("got int = %d\n", got_int); + got_int = 0; + //schedule(); + enable_irq (IFXMIPS_MEI_INT); + } + //mbox_read(&rd_mbox[0],6); + MEI_WAIT (100); + } +} + +static MEI_ERROR +DFE_Loopback_Test (void) +{ + int i = 0; + u32 arc_debug_data = 0, temp; + + meiResetARC (); + // start the clock + arc_debug_data = ACL_CLK_MODE_ENABLE; + meiDebugWrite (CRI_CCR0, &arc_debug_data, 1); + +#if defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK) + // WriteARCreg(AUX_XMEM_LTEST,0); + meiControlModeSwitch (MEI_MASTER_MODE); +#define AUX_XMEM_LTEST 0x128 + _meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_XMEM_LTEST, 0); + meiControlModeSwitch (JTAG_MASTER_MODE); + + // WriteARCreg(AUX_XDMA_GAP,0); + meiControlModeSwitch (MEI_MASTER_MODE); +#define AUX_XDMA_GAP 0x114 + _meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_XDMA_GAP, 0); + meiControlModeSwitch (JTAG_MASTER_MODE); + + meiControlModeSwitch (MEI_MASTER_MODE); + temp = 0; + _meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, + (u32) MEI_XDATA_BASE_SH, temp); + meiControlModeSwitch (JTAG_MASTER_MODE); + + i = alloc_processor_memory (SDRAM_SEGMENT_SIZE * 16, adsl_mem_info); + if (i >= 0) { + int idx; + + for (idx = 0; idx < i; idx++) { + adsl_mem_info[idx].type = FREE_RELOAD; + IFXMIPS_WRITE_REGISTER_L ((((uint32_t) + adsl_mem_info[idx]. + address) & 0x0fffffff), + MEI_XMEM_BAR_BASE + idx * 4); + printk ("bar%d(%X)=%X\n", idx, + MEI_XMEM_BAR_BASE + idx * 4, + (((uint32_t) adsl_mem_info[idx]. + address) & 0x0fffffff)); + memset ((u8 *) adsl_mem_info[idx].address, 0, + SDRAM_SEGMENT_SIZE); + } + + meiLongwordWrite ( MEI_XDATA_BASE_SH, ((unsigned long) + adsl_mem_info + [XDATA_REGISTER]. + address) & + 0x0FFFFFFF); + + } + else { + printk ("cannot load image: no memory\n\n"); + return MEI_FAILURE; + } + //WriteARCreg(AUX_IC_CTRL,2); + meiControlModeSwitch (MEI_MASTER_MODE); +#define AUX_IC_CTRL 0x11 + _meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_IC_CTRL, 2); + meiControlModeSwitch (JTAG_MASTER_MODE); + + meiHaltArc (); + +#ifdef DFE_PING_TEST + + printk ("ping test image size=%d\n", sizeof (code_array)); + memcpy ((u8 *) (adsl_mem_info[0].address + 0x1004), &code_array[0], + sizeof (code_array)); + load_jump_table (0x80000 + 0x1004); + +#endif //DFE_PING_TEST + + printk ("ARC ping test code download complete\n"); +#endif //defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK) +#ifdef DFE_MEM_TEST + meiLongwordWrite (ARC_TO_MEI_INT_MASK, MSGAV_EN); + + arc_code_page_download (1537, &mem_test_code_array[0]); + printk ("ARC mem test code download complete\n"); +#endif //DFE_MEM_TEST +#ifdef DFE_ATM_LOOPBACK + arc_debug_data = 0xf; + arc_code_page_download (1077, &code_array[0]); + // Start Iridia IT_AMODE (in dmp access) why is it required? + meiDebugWrite (0x32010, &arc_debug_data, 1); +#endif //DFE_ATM_LOOPBACK + meiMailboxInterruptsEnable (); + meiRunArc (); + +#ifdef DFE_PING_TEST + arc_ping_testing (); +#endif //DFE_PING_TEST +#ifdef DFE_MEM_TEST + wait_mem_test_result (); +#endif //DFE_MEM_TEST + + free_image_buffer (FREE_ALL); + return MEI_SUCCESS; +} + +#endif //DFE_LOOPBACK +//end of TODO, for loopback test + +#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT) + +/* + * Led Thread Main function + */ +static int +led_poll (void *unused) +{ + struct task_struct *tsk = current; + + daemonize("mei_led_poll"); + strcpy (tsk->comm, "atm_led"); + sigfillset (&tsk->blocked); + + stop_led_module = 0; //begin polling ... + + while (!stop_led_module) { + if (led_status_on || led_need_to_flash) { + adsl_led_flash_task (); + } + if (led_status_on) //sleep 200 ms to check if need to turn led off + { + interruptible_sleep_on_timeout + (&wait_queue_led_polling, 25); + } + else { + interruptible_sleep_on (&wait_queue_led_polling); + } + } + return 0; +} + +/* + * API for atm driver to notify led thread a data coming/sending + */ +#if defined (CONFIG_ATM_IFXMIPS) +static int +adsl_led_flash (void) +{ + if (!modem_ready) + return 0; + + if (led_status_on == 0 && led_need_to_flash == 0) + { + wake_up_interruptible (&wait_queue_led_polling); //wake up and clean led module + } + led_need_to_flash = 1; //asking to flash led + + return 0; +} +#endif +/* + * Main task for led controlling. + */ +static int +adsl_led_flash_task (void) +{ +#ifdef DATA_LED_ADSL_FW_HANDLE + u16 one = 1; + u16 zero = 0; + u16 data = 0x0600; + u16 CMVMSG[MSG_LENGTH]; +#endif + +// printk("Task Running...\n"); //joelin test + + if (!showtime) { + led_need_to_flash = 0; + led_status_on = 0; + return 0; + } + + if (led_status_on == 0 && led_need_to_flash == 1) { + +#ifdef DATA_LED_ADSL_FW_HANDLE + data = 0x0901; //flash + send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG); //use GPIO9 for TR68 data led .flash. +#else + ifxmips_led_blink_set(0x0); // data + ifxmips_led_blink_set(0x1); // link +#endif + led_status_on = 1; + + } + else if (led_status_on == 1 && led_need_to_flash == 0) { +#ifdef DATA_LED_ADSL_FW_HANDLE +#ifdef DATA_LED_ON_MODE + data = 0x0903; //use GPIO9 for TR68 data led .turn on. +#else + data = 0x0900; //off +#endif + printk ("off %04X\n", data); + send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG); //use GPIO9 for TR68 data led .off. +#else +#endif + led_status_on = 0; + } + led_need_to_flash = 0; + return 0; +} + +/* + * Led initialization function + * This function create a thread to polling atm traffic and do led blanking + */ +static int +ifxmips_mei_led_init (void) +{ + init_waitqueue_head (&wait_queue_led_polling); // adsl led for led function + kernel_thread (led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_THREAD); + return 0; +} + +/* + * Led destory function + */ +static int +ifxmips_mei_led_cleanup (void) +{ + stop_led_module = 1; //wake up and clean led module + wake_up_interruptible (&wait_queue_led_polling); //wake up and clean led module + return 0; +} +#endif //#ifdef CONFIG_IFXMIPS_MEI_LED + +//////////////////////////////////////////////////////////////////////////// +int __init +ifxmips_mei_init_module (void) +{ + struct proc_dir_entry *entry; + int i; + u32 temp; +#ifdef CONFIG_DEVFS_FS + char buf[10]; +#endif + reg_entry_t regs_temp[PROC_ITEMS] = // Items being debugged + { + /* { flag, name, description } */ + {&arcmsgav, "arcmsgav", "arc to mei message ", 0}, + {&cmv_reply, "cmv_reply", "cmv needs reply", 0}, + {&cmv_waiting, "cmv_waiting", + "waiting for cmv reply from arc", 0}, + {&indicator_count, "indicator_count", + "ARC to MEI indicator count", 0}, + {&cmv_count, "cmv_count", "MEI to ARC CMVs", 0}, + {&reply_count, "reply_count", "ARC to MEI Reply", 0}, + {(int *) Recent_indicator, "Recent_indicator", + "most recent indicator", 0}, + {(int *) 8, "version", "version of firmware", 0}, + }; + do_gettimeofday (&time_disconnect); + + printk ("Danube MEI version:%s\n", IFXMIPS_MEI_VERSION); + + memcpy ((char *) regs, (char *) regs_temp, sizeof (regs_temp)); + MEI_MUTEX_INIT (mei_sema, 1); // semaphore initialization, mutex + MEI_INIT_WAKELIST ("arcq", wait_queue_arcmsgav); // for ARCMSGAV + MEI_INIT_WAKELIST ("arcldq", wait_queue_loop_diagnostic); // for loop diagnostic function +#ifdef IFX_ADSL_L3_MODE_SUPPORT + MEI_INIT_WAKELIST ("arcl3q", wait_queue_l3); // for l3 power mode +#endif //IFX_ADSL_L3_MODE_SUPPORT + + + memset (&adsl_mem_info[0], 0, sizeof (smmu_mem_info_t) * MAX_BAR_REGISTERS); +#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT) + printk("not enabling mei leds due to bug that makes the board hang\n"); +// ifxmips_mei_led_init (); +#endif + +#ifdef CONFIG_IFXMIPS_MEI_MIB + ifxmips_mei_mib_init (); +#endif + +#ifdef IFXMIPS_CLEAR_EOC + MEI_INIT_WAKELIST ("arceoc", wait_queue_hdlc_poll); + ifxmips_mei_ceoc_init (); +#endif + // power up mei + temp = readl(IFXMIPS_PMU_PWDCR); + temp &= 0xffff7dbe; + writel(temp, IFXMIPS_PMU_PWDCR); + +#if defined (CONFIG_ATM_IFXMIPS) + IFX_ATM_LED_Callback_Register (adsl_led_flash); +#endif + if (register_chrdev (major, IFXMIPS_MEI_DEVNAME, &mei_operations) != 0) { + printk("\n\n unable to register major for ifxmips_mei!!!"); + return -ENODEV; + } else { + printk("registered ifxmips_mei on #%d\n", major); + } + + disable_irq(IFXMIPS_MEI_INT); + + if (request_irq(IFXMIPS_MEI_INT, mei_interrupt_arcmsgav, 0, "ifxmips_mei_arcmsgav", NULL) != 0) { + printk("\n\n unable to register irq(%d) for ifxmips_mei!!!", + IFXMIPS_MEI_INT); + return -1; + } + +// enable_irq(IFXMIPS_MEI_INT); + // procfs + meidir = proc_mkdir(MEI_DIRNAME, &proc_root); + if (meidir == NULL) + { + printk(": can't create /proc/" MEI_DIRNAME "\n\n"); + return -ENOMEM; + } + + for (i = 0; i < NUM_OF_REG_ENTRY; i++) { + entry = create_proc_entry (regs[i].name, + S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, meidir); + if (entry) + { + regs[i].low_ino = entry->low_ino; + entry->proc_fops = &proc_operations; + } else { + printk (": can't create /proc/" MEI_DIRNAME "/%s\n\n", regs[i].name); + return -ENOMEM; + } + } + + ///////////////////////////////// register net device //////////////////////////// +#ifdef DFE_LOOPBACK + DFE_Loopback_Test (); +#endif //DFE_LOOPBACK + return 0; +} + +void __exit +ifxmips_mei_cleanup_module (void) +{ + int i; + +#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT) + ifxmips_mei_led_cleanup (); +#endif + showtime = 0; //joelin,clear task + +#ifdef CONFIG_PROC_FS + for (i = 0; i < NUM_OF_REG_ENTRY; i++) + remove_proc_entry (regs[i].name, meidir); + + remove_proc_entry (MEI_DIRNAME, &proc_root); +#endif //CONFIG_PROC_FS + +#if defined (CONFIG_ATM_IFXMIPS) + IFX_ATM_LED_Callback_Unregister (adsl_led_flash); +#endif + disable_irq (IFXMIPS_MEI_INT); + free_irq(IFXMIPS_MEI_INT, NULL); + +#ifdef CONFIG_DEVFS_FS + devfs_unregister (mei_devfs_handle); +#else + unregister_chrdev (major, "ifxmips_mei"); +#endif +#ifdef CONFIG_IFXMIPS_MEI_MIB + ifxmips_mei_mib_cleanup (); +#endif + + free_image_buffer (FREE_ALL); + return; +} + +EXPORT_SYMBOL (meiDebugRead); +EXPORT_SYMBOL (meiDebugWrite); +EXPORT_SYMBOL (ifx_me_hdlc_send); +EXPORT_SYMBOL (ifx_mei_hdlc_read); +MODULE_LICENSE ("GPL"); + +module_init (ifxmips_mei_init_module); +module_exit (ifxmips_mei_cleanup_module); diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h new file mode 100644 index 0000000000..c4a9929f6b --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h @@ -0,0 +1,22 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2007 John Crispin <blogic@openwrt.org> + */ + +extern void ifxmips_led_set(unsigned int led); +extern void ifxmips_led_clear(unsigned int led); +extern void ifxmips_led_blink_set(unsigned int led); +extern void ifxmips_led_blink_clear(unsigned int led); diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h new file mode 100644 index 0000000000..d8a4b8867f --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h @@ -0,0 +1,270 @@ +/****************************************************************************** +** +** FILE NAME : danube_mei.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_H +#define _IFXMIPS_MEI_H +///////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#include "ifxmips_mei_app.h" + +#define IFXMIPS_MEI_DEBUG +#define IFXMIPS_MEI_CMV_EXTRA +#define IFXMIPS_MEI_MAJOR 106 + +/* +** Define where in ME Processor's memory map the Stratify chip lives +*/ + +#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) + +// Mailboxes +#define MSG_LENGTH 16 // x16 bits +#define YES_REPLY 1 +#define NO_REPLY 0 + +#define CMV_TIMEOUT 100 //jiffies +#define MIB_INTERVAL 10000 //msec + +/*** Bit definitions ***/ + +#define FALSE 0 +#define TRUE 1 +#define BIT0 1<<0 +#define BIT1 1<<1 +#define BIT2 1<<2 +#define BIT3 1<<3 +#define BIT4 1<<4 +#define BIT5 1<<5 +#define BIT6 1<<6 +#define BIT7 1<<7 +#define BIT8 1<<8 +#define BIT9 1<<9 +#define BIT10 1<<10 +#define BIT11 1<<11 +#define BIT12 1<<12 +#define BIT13 1<<13 +#define BIT14 1<<14 +#define BIT15 1<<15 +#define BIT16 1<<16 +#define BIT17 1<<17 +#define BIT18 1<<18 +#define BIT19 1<<19 +#define BIT20 1<<20 +#define BIT21 1<<21 +#define BIT22 1<<22 +#define BIT23 1<<23 +#define BIT24 1<<24 +#define BIT25 1<<25 +#define BIT26 1<<26 +#define BIT27 1<<27 +#define BIT28 1<<28 +#define BIT29 1<<29 +#define BIT30 1<<30 +#define BIT31 1<<31 + +// ARC register addresss +#define ARC_STATUS 0x0 +#define ARC_LP_START 0x2 +#define ARC_LP_END 0x3 +#define ARC_DEBUG 0x5 +#define ARC_INT_MASK 0x10A + +#define IRAM0_BASE (0x00000) +#define IRAM1_BASE (0x04000) +#define BRAM_BASE (0x0A000) + +#define ADSL_BASE (0x20000) +#define CRI_BASE (ADSL_BASE + 0x11F00) +#define CRI_CCR0 (CRI_BASE + 0x00) +#define CRI_RST (CRI_BASE + 0x04*4) +#define ADSL_DILV_BASE (ADSL_BASE+0x20000) + +// +#define IRAM0_ADDR_BIT_MASK 0xFFF +#define IRAM1_ADDR_BIT_MASK 0xFFF +#define BRAM_ADDR_BIT_MASK 0xFFF +#define RX_DILV_ADDR_BIT_MASK 0x1FFF + +// CRI_CCR0 Register definitions +#define CLK_2M_MODE_ENABLE BIT6 +#define ACL_CLK_MODE_ENABLE BIT4 +#define FDF_CLK_MODE_ENABLE BIT2 +#define STM_CLK_MODE_ENABLE BIT0 + +// CRI_RST Register definitions +#define FDF_SRST BIT3 +#define MTE_SRST BIT2 +#define FCI_SRST BIT1 +#define AAI_SRST BIT0 + +// MEI_TO_ARC_INTERRUPT Register definitions +#define MEI_TO_ARC_INT1 BIT3 +#define MEI_TO_ARC_INT0 BIT2 +#define MEI_TO_ARC_CS_DONE BIT1 //need to check +#define MEI_TO_ARC_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT Register definitions +#define ARC_TO_MEI_INT1 BIT8 +#define ARC_TO_MEI_INT0 BIT7 +#define ARC_TO_MEI_CS_REQ BIT6 +#define ARC_TO_MEI_DBG_DONE BIT5 +#define ARC_TO_MEI_MSGACK BIT4 +#define ARC_TO_MEI_NO_ACCESS BIT3 +#define ARC_TO_MEI_CHECK_AAITX BIT2 +#define ARC_TO_MEI_CHECK_AAIRX BIT1 +#define ARC_TO_MEI_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT_MASK Register definitions +#define GP_INT1_EN BIT8 +#define GP_INT0_EN BIT7 +#define CS_REQ_EN BIT6 +#define DBG_DONE_EN BIT5 +#define MSGACK_EN BIT4 +#define NO_ACC_EN BIT3 +#define AAITX_EN BIT2 +#define AAIRX_EN BIT1 +#define MSGAV_EN BIT0 + +#define MEI_SOFT_RESET BIT0 + +#define HOST_MSTR BIT0 + +#define JTAG_MASTER_MODE 0x0 +#define MEI_MASTER_MODE HOST_MSTR + +// MEI_DEBUG_DECODE Register definitions +#define MEI_DEBUG_DEC_MASK (0x3) +#define MEI_DEBUG_DEC_AUX_MASK (0x0) +#define MEI_DEBUG_DEC_DMP1_MASK (0x1) +#define MEI_DEBUG_DEC_DMP2_MASK (0x2) +#define MEI_DEBUG_DEC_CORE_MASK (0x3) + +#define AUX_STATUS (0x0) +// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate +// page swap requests. +#define MEI_TO_ARC_MAILBOX (0xDFD0) +#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) + +#define ARC_TO_MEI_MAILBOX (0xDFA0) +#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) + +// Codeswap request messages are indicated by setting BIT31 +#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) + +// Clear Eoc messages received are indicated by setting BIT17 +#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) + +/* +** Swap page header +*/ +// Page must be loaded at boot time if size field has BIT31 set +#define BOOT_FLAG (BIT31) +#define BOOT_FLAG_MASK ~BOOT_FLAG + +#define FREE_RELOAD 1 +#define FREE_SHOWTIME 2 +#define FREE_ALL 3 + +#define IFX_POP_EOC_DONE 0 +#define IFX_POP_EOC_FAIL -1 + +#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered + +// marcos +#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0) +#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) +#define SET_BIT(reg, mask) reg |= (mask) +#define CLEAR_BIT(reg, mask) reg &= (~mask) +#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) +#define SET_BITS(reg, mask) SET_BIT(reg, mask) +#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} + +#define ALIGN_SIZE ( 1L<<10 ) //1K size align +#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) + +// swap marco +#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} +#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} + +// Swap page header describes size in 32-bit words, load location, and image offset +// for program and/or data segments +typedef struct _arc_swp_page_hdr { + u32 p_offset; //Offset bytes of progseg from beginning of image + u32 p_dest; //Destination addr of progseg on processor + u32 p_size; //Size in 32-bitwords of program segment + u32 d_offset; //Offset bytes of dataseg from beginning of image + u32 d_dest; //Destination addr of dataseg on processor + u32 d_size; //Size in 32-bitwords of data segment +} ARC_SWP_PAGE_HDR; + +#ifdef CONFIG_PROC_FS +typedef struct reg_entry { + int *flag; + char name[30]; // big enough to hold names + char description[100]; // big enough to hold description + unsigned short low_ino; +} reg_entry_t; +#endif + +/* +** Swap image header +*/ +#define GET_PROG 0 // Flag used for program mem segment +#define GET_DATA 1 // Flag used for data mem segment + +// Image header contains size of image, checksum for image, and count of +// page headers. Following that are 'count' page headers followed by +// the code and/or data segments to be loaded +typedef struct _arc_img_hdr { + u32 size; // Size of binary image in bytes + u32 checksum; // Checksum for image + u32 count; // Count of swp pages in image + ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy +} ARC_IMG_HDR; + +typedef struct smmu_mem_info { + int type; + unsigned long nCopy; + unsigned long size; + unsigned char *address; + unsigned char *org_address; +} smmu_mem_info_t; + +/* +** Native size for the Stratiphy interface is 32-bits. All reads and writes +** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or +** byte data. Read routines are provided. Write routines are probably a bad idea, as the +** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle +** could very well have unintended results. +*/ +MEI_ERROR meiCMV (u16 *, int, u16 *); // first arg is CMV to ARC, second to indicate whether need reply + +MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize); +extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len); +extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len); +#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS) +extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, + u16 * data, u16 * CMVMSG); +int ifx_mei_hdlc_send (char *, int); +int ifx_mei_hdlc_read (char *, int); +#endif + +#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h new file mode 100644 index 0000000000..cba742e58a --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h @@ -0,0 +1,116 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_app.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_APP_H +#define _IFXMIPS_MEI_APP_H + // ioctl control +#define IFXMIPS_MEI_START 300 +#define IFXMIPS_MEI_REPLY 301 +#define IFXMIPS_MEI_NOREPLY 302 + +#define IFXMIPS_MEI_RESET 303 +#define IFXMIPS_MEI_REBOOT 304 +#define IFXMIPS_MEI_HALT 305 +#define IFXMIPS_MEI_CMV_WINHOST 306 +#define IFXMIPS_MEI_CMV_READ 307 +#define IFXMIPS_MEI_CMV_WRITE 308 +#define IFXMIPS_MEI_MIB_DAEMON 309 +#define IFXMIPS_MEI_SHOWTIME 310 +#define IFXMIPS_MEI_REMOTE 311 +#define IFXMIPS_MEI_READDEBUG 312 +#define IFXMIPS_MEI_WRITEDEBUG 313 +#define IFXMIPS_MEI_LOP 314 + +#define IFXMIPS_MEI_PCM_SETUP 315 +#define IFXMIPS_MEI_PCM_START_TIMER 316 +#define IFXMIPS_MEI_PCM_STOP_TIMER 317 +#define IFXMIPS_MEI_PCM_CHECK 318 +#define IFXMIPS_MEI_GET_EOC_LEN 319 +#define IFXMIPS_MEI_GET_EOC_DATA 320 +#define IFXMIPS_MEI_PCM_GETDATA 321 +#define IFXMIPS_MEI_PCM_GPIO 322 +#define IFXMIPS_MEI_EOC_SEND 323 +#define IFXMIPS_MEI_DOWNLOAD 326 +#define IFXMIPS_MEI_JTAG_ENABLE 327 +#define IFXMIPS_MEI_RUN 328 +#define IFXMIPS_MEI_DEBUG_MODE 329 + +/* Loop diagnostics mode of the ADSL line related constants */ +#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 330 +#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 331 +#define LOOP_DIAGNOSTIC_MODE_COMPLETE 332 +#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 333 + +/* L3 Power Mode */ +/* Get current Power Moaagement Mode Status*/ +#define GET_POWER_MANAGEMENT_MODE 334 +/* Set L3 Power Mode /disable L3 power mode */ +#define SET_L3_POWER_MODE 335 + +/* get current dual latency configuration */ +#define GET_ADSL_DUAL_LATENCY 336 +/* enable/disable dual latency path */ +#define SET_ADSL_DUAL_LATENCY 337 + +/* Enable/Disable autoboot mode. */ +/* When the autoboot mode is disabled, the driver will excute some cmv + commands for led control and dual latency when DSL startup.*/ +#define AUTOBOOT_ENABLE_SET 338 + +/* Enable/Disable Quiet Mode*/ +/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */ +#define QUIET_MODE_GET 339 +#define QUIET_MODE_SET 340 + +/* Enable/Disable showtime lock*/ +/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */ +#define SHOWTIME_LOCK_GET 341 +#define SHOWTIME_LOCK_SET 342 + +#define L0_POWER_MODE 0 +#define L2_POWER_MODE 2 +#define L3_POWER_MODE 3 + +#define DUAL_LATENCY_US_DS_DISABLE 0 +#define DUAL_LATENCY_US_ENABLE (1<<0) +#define DUAL_LATENCY_DS_ENABLE (1<<1) +#define DUAL_LATENCY_US_DS_ENABLE (DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE) + +#define ME_HDLC_IDLE 0 +#define ME_HDLC_INVALID_MSG 1 +#define ME_HDLC_MSG_QUEUED 2 +#define ME_HDLC_MSG_SENT 3 +#define ME_HDLC_RESP_RCVD 4 +#define ME_HDLC_RESP_TIMEOUT 5 +#define ME_HDLC_RX_BUF_OVERFLOW 6 +#define ME_HDLC_UNRESOLVED 1 +#define ME_HDLC_RESOLVED 2 + +/*** Enums ***/ +typedef enum mei_error { + MEI_SUCCESS = 0, + MEI_FAILURE = -1, + MEI_MAILBOX_FULL = -2, + MEI_MAILBOX_EMPTY = -3, + MEI_MAILBOX_TIMEOUT = -4, +} MEI_ERROR; + +#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h new file mode 100644 index 0000000000..08c3dd3fc1 --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h @@ -0,0 +1,1191 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_app_ioctl.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef __IFXMIPS_MEI_APP_IOCTL_H +#define __IFXMIPS_MEI_APP_IOCTL_H + +#ifdef __KERNEL__ +#include "ifxmips_mei_ioctl.h" +#endif + +/* Interface Name */ +//#define INTERFACE_NAME <define the interface> + +/* adslLineTable constants */ +#define GET_ADSL_LINE_CODE 1 + +/* adslAtucPhysTable constants */ +#define GET_ADSL_ATUC_PHY 4 + +/* adslAturPhysTable constants */ +#define GET_ADSL_ATUR_PHY 10 + +/* adslAtucChanTable constants */ +#define GET_ADSL_ATUC_CHAN_INFO 15 + +/* adslAturChanTable constants */ +#define GET_ADSL_ATUR_CHAN_INFO 18 + +/* adslAtucPerfDataTable constants */ +#define GET_ADSL_ATUC_PERF_DATA 21 + +/* adslAturPerfDataTable constants */ +#define GET_ADSL_ATUR_PERF_DATA 40 + +/* adslAtucIntervalTable constants */ +#define GET_ADSL_ATUC_INTVL_INFO 60 + +/* adslAturIntervalTable constants */ +#define GET_ADSL_ATUR_INTVL_INFO 65 + +/* adslAtucChanPerfDataTable constants */ +#define GET_ADSL_ATUC_CHAN_PERF_DATA 70 + +/* adslAturChanPerfDataTable constants */ +#define GET_ADSL_ATUR_CHAN_PERF_DATA 90 + +/* adslAtucChanIntervalTable constants */ +#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110 + +/* adslAturChanIntervalTable constants */ +#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115 + +/* adslLineAlarmConfProfileTable constants */ +#define GET_ADSL_ALRM_CONF_PROF 120 +#define SET_ADSL_ALRM_CONF_PROF 121 + +/* adslAturTrap constants */ +#define ADSL_ATUR_TRAPS 135 + +////////////////// RFC-3440 ////////////// + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +/* adslLineExtTable */ +#define GET_ADSL_ATUC_LINE_EXT 201 +#define SET_ADSL_ATUC_LINE_EXT 203 + +/* adslAtucPerfDateExtTable */ +#define GET_ADSL_ATUC_PERF_DATA_EXT 205 + +/* adslAtucIntervalExtTable */ +#define GET_ADSL_ATUC_INTVL_EXT_INFO 221 + +/* adslAturPerfDataExtTable */ +#define GET_ADSL_ATUR_PERF_DATA_EXT 225 + +/* adslAturIntervalExtTable */ +#define GET_ADSL_ATUR_INTVL_EXT_INFO 233 + +/* adslAlarmConfProfileExtTable */ +#define GET_ADSL_ALRM_CONF_PROF_EXT 235 +#define SET_ADSL_ALRM_CONF_PROF_EXT 236 + +/* adslAturExtTrap */ +#define ADSL_ATUR_EXT_TRAPS 240 + +#endif + +/* The following constants are added to support the WEB related ADSL Statistics */ + +/* adslLineStatus constants */ +#define GET_ADSL_LINE_STATUS 245 + +/* adslLineRate constants */ +#define GET_ADSL_LINE_RATE 250 + +/* adslLineInformation constants */ +#define GET_ADSL_LINE_INFO 255 + +/* adslNearEndPerformanceStats constants */ +#define GET_ADSL_NEAREND_STATS 270 + +/* adslFarEndPerformanceStats constants */ +#define GET_ADSL_FAREND_STATS 290 + +/* Sub-carrier related parameters */ +#define GET_ADSL_LINE_INIT_STATS 150 +#define GET_ADSL_POWER_SPECTRAL_DENSITY 151 + +#define IFXMIPS_MIB_LO_ATUC 295 +#define IFXMIPS_MIB_LO_ATUR 296 + +#define GET_ADSL_ATUC_SUBCARRIER_STATS 297 +#define GET_ADSL_ATUR_SUBCARRIER_STATS 298 + + + +/////////////////////////////////////////////////////////// +// makeCMV(Opcode, Group, Address, Index, Size, Data) + +/* adslLineCode Flags */ +#define LINE_CODE_FLAG 0x1 /* BIT 0th position */ + +/* adslAtucPhysTable Flags */ +#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage) +#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage) + +#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ +#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage) + +#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ +#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage) + +#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */ + +#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */ +#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage) + +#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */ +#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage) + + +/* adslAturPhysTable Flags */ +#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage) +#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage) + +#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ +#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage) + +#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ +#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage) + +#define ATUR_SNRMGN_FLAG 0x8 +#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */ +#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage) +#else +#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage) +#endif + +#define ATUR_ATTN_FLAG 0x10 +#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage) + +#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */ + +#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */ +#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage) + +#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */ +#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage) + +/* adslAtucChanTable Flags */ +#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ +//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage) +#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage) + +#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ +#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage) + +#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ + +/* adslAturChanTable Flags */ +#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ +//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage) +#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage) + +#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ +#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage) + +#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ + +#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */ + +/* adslAtucPerfDataTable Flags */ +#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage) +#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */ +#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage) +#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */ +#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ +#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ +#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ +#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ +#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */ +#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */ +#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ +#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ +#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */ +#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */ +#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ +#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ +#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */ +#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */ + +/* adslAturPerfDataTable Flags */ +#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ +#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */ +#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */ +#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage) +#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */ +#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage) +#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ +#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ +#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ +#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ +#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */ +#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */ +#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ +#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ +#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */ +#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */ +#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ +#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ +#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */ +#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */ + +/* adslAtucIntervalTable Flags */ +#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ +#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */ +#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */ +#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */ +#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ + +/* adslAturIntervalTable Flags */ +#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ +#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */ +#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */ +#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */ +#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ + +/* adslAtucChanPerfDataTable Flags */ +#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ +#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ +#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ +#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ +#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ +#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ +#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ +#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ +#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ +#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ +#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/ +#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ +#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ +#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ +#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ +#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ +#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */ +#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ +#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ + + +/* adslAturChanPerfDataTable Flags */ +#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ +#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage) +#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage) +#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ +#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage) +#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage) +#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ +#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage) +#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage) +#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ +#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage) +#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage) +#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ +#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ +#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ +#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ +#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ +#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ +#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ +#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ +#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ +#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ +#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ +#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */ +#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ +#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ + +/* adslAtucChanIntervalTable Flags */ +#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ +#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ +#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ +#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ +#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ + +/* adslAturChanIntervalTable Flags */ +#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */ +#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ +#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ +#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ +#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ +#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ + +/* adslLineAlarmConfProfileTable Flags */ +#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */ +#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */ +#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */ +#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */ +#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */ +#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */ +#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */ +#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */ +#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */ +#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */ +#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */ +#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */ +#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */ +#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */ +#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */ +#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */ +#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */ + + +/* adslAturTraps Flags */ +#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */ +#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */ +#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */ +#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */ +#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */ +#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */ +#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */ + +//RFC- 3440 FLAG DEFINITIONS + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +/* adslLineExtTable flags */ +#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */ +#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage) +#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */ +#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage) +#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage) +#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */ +#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage) +#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */ +#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage) + +/* adslAtucPerfDataExtTable flags */ +#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) +#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) +#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */ +#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage) +#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */ +#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage) +#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */ +#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */ +#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */ +#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */ +#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */ +#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */ +#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */ +#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */ +#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */ +#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */ +#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */ +#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */ + +/* adslAturPerfDataExtTable */ +#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */ +#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage) +#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */ +#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage) +#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */ +#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */ +#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */ +#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */ +#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */ +#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */ + +/* adslAutcIntervalExtTable flags */ +#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */ +#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */ +#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */ +#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */ + +/* adslAturIntervalExtTable */ +#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */ +#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */ + +/* adslAlarmConfProfileExtTable */ +#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */ +#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */ +#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */ +#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */ +#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */ + +/* adslAturExtTraps */ +#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */ +#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */ +#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */ +#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */ +#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */ + +#endif + +/* adslLineStatus Flags */ +#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */ +#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage) +#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */ +#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage) +#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */ +#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage) +#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */ +#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage) + +/* adslLineRate Flags */ +#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */ +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage) + + +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage) + +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage) + +#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */ +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage) + + +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage) + +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage) + +#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */ +#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage) + +#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */ +#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage) + +/* adslLineInformation Flags */ +#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */ +#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage) +#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage) +#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */ +#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage) +#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage) +#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */ +#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage) +#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */ +#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage) +#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */ +#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage) +#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */ +#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage) +#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */ +#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage) +#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage) +#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage) +#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */ +#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage) +#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */ +#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage) +#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */ +#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage) + +/* adslNearEndPerformanceStats Flags */ +#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage) +#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage) +#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */ +#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage) +#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */ +#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */ +#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */ +#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */ +#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */ +#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */ +#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage) +#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage) +#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage) +#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage) +#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */ +#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage) +#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */ +#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage) +#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */ +#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage) +#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */ +#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage) +#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */ +#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage) +#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */ +#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage) +#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage) +#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */ + +/* adslFarEndPerformanceStats Flags */ +#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage) +#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */ +#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */ +#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */ +#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */ +#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */ +#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage) +#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage) +#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */ +#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage) +#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage) +#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */ +#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage) +#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */ +#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage) +#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */ +#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage) +#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */ +#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage) +#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */ +#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage) +#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */ +#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage) +#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage) +#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */ +// 603221:tc.chen end +/* TR-69 related additional parameters - defines */ +/* Defines for struct adslATURSubcarrierInfo */ +#define NEAREND_HLINSC 0x1 +#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data, TxMessage) +#define NEAREND_HLINPS 0x2 +#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data, TxMessage) +#define NEAREND_HLOGMT 0x4 +#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data, TxMessage) +#define NEAREND_HLOGPS 0x8 +#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data, TxMessage) +#define NEAREND_QLNMT 0x10 +#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data, TxMessage) +#define NEAREND_QLNPS 0x20 +#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data, TxMessage) +#define NEAREND_SNRMT 0x40 +#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data, TxMessage) +#define NEAREND_SNRPS 0x80 +#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data, TxMessage) +#define NEAREND_BITPS 0x100 +#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data, TxMessage) +#define NEAREND_GAINPS 0x200 +#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data, TxMessage) + +/* Defines for struct adslATUCSubcarrierInfo */ +#define FAREND_HLINSC 0x1 + +/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */ +#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 2, 1, data, TxMessage) +#define FAREND_HLINPS 0x2 +#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data, TxMessage) +#define FAREND_HLOGMT 0x4 +#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data, TxMessage) +#define FAREND_HLOGPS 0x8 +#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data, TxMessage) +#define FAREND_QLNMT 0x10 +#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data, TxMessage) +#define FAREND_QLNPS 0x20 +#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data, TxMessage) +#define FAREND_SNRMT 0x40 +#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data, TxMessage) +#define FAREND_SNRPS 0x80 +#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 11, idx, size, data, TxMessage) +#define FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data, TxMessage) +#define FAREND_BITPS 0x100 +#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data, TxMessage) +#define FAREND_GAINPS 0x200 +#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data, TxMessage) + + +// GET_ADSL_POWER_SPECTRAL_DENSITY +#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage) +#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage) +#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage) +#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage) +#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage) +#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage) + +/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing + +#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val)) +// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer + +#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0) +// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer + + +#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit)) +// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer + + +////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION + +//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type. + // +#define u32 unsigned int +#define u16 unsigned short +#define s16 short +#define u8 unsigned char + + +typedef u32 AdslPerfTimeElapsed; +typedef u32 AdslPerfPrevDayCount; +typedef u32 PerfCurrentCount; +typedef u32 PerfIntervalCount; +typedef u32 AdslPerfCurrDayCount; + + +//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry) + +typedef struct adslLineTableEntry { + int ifIndex; + int adslLineCode; + u8 flags; +} adslLineTableEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslLineExtTableEntry { + int ifIndex; + u16 adslLineTransAtucCap; + u16 adslLineTransAtucConfig; + u16 adslLineTransAtucActual; + int adslLineGlitePowerState; + u32 flags; +}adslLineExtTableEntry; +#endif +//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry) +#ifndef u_char +#define u_char u8 +#endif + +typedef struct adslVendorId { + u16 country_code; + u_char provider_id[4]; /* Ascii characters */ + u_char revision_info[2]; +}adslVendorId; + +typedef struct adslAtucPhysEntry { + int ifIndex; + char serial_no[32]; + union { + char vendor_id[16]; + adslVendorId vendor_info; + } vendor_id; + char version_no[16]; + u32 status; + int outputPwr; + u32 attainableRate; + u8 flags; +} adslAtucPhysEntry; + + +//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry) + +typedef struct adslAturPhysEntry { + int ifIndex; + char serial_no[32]; + union { + char vendor_id[16]; + adslVendorId vendor_info; + } vendor_id; + char version_no[16]; + int SnrMgn; + u32 Attn; + u32 status; + int outputPwr; + u32 attainableRate; + u8 flags; +} adslAturPhysEntry; + + +//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo) + +typedef struct adslAtucChanInfo { + int ifIndex; + u32 interleaveDelay; + u32 currTxRate; + u32 prevTxRate; + u8 flags; +} adslAtucChanInfo; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo) + +typedef struct adslAturChanInfo { + int ifIndex; + u32 interleaveDelay; + u32 currTxRate; + u32 prevTxRate; + u32 crcBlkLen; + u8 flags; +} adslAturChanInfo; + + +//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry) + +typedef struct atucPerfDataEntry +{ + int ifIndex; + u32 adslAtucPerfLofs; + u32 adslAtucPerfLoss; + u32 adslAtucPerfESs; + u32 adslAtucPerfInits; + int adslAtucPerfValidIntervals; + int adslAtucPerfInvalidIntervals; + AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAtucPerfCurr15MinLofs; + PerfCurrentCount adslAtucPerfCurr15MinLoss; + PerfCurrentCount adslAtucPerfCurr15MinESs; + PerfCurrentCount adslAtucPerfCurr15MinInits; + AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs; + AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss; + AdslPerfCurrDayCount adslAtucPerfCurr1DayESs; + AdslPerfCurrDayCount adslAtucPerfCurr1DayInits; + int adslAtucPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss; + AdslPerfPrevDayCount adslAtucPerfPrev1DayESs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayInits; + u32 flags; +} atucPerfDataEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct atucPerfDataExtEntry + { + int ifIndex; + u32 adslAtucPerfStatFastR; + u32 adslAtucPerfStatFailedFastR; + u32 adslAtucPerfStatSesL; + u32 adslAtucPerfStatUasL; + u32 adslAtucPerfCurr15MinFastR; + u32 adslAtucPerfCurr15MinFailedFastR; + u32 adslAtucPerfCurr15MinSesL; + u32 adslAtucPerfCurr15MinUasL; + u32 adslAtucPerfCurr1DayFastR; + u32 adslAtucPerfCurr1DayFailedFastR; + u32 adslAtucPerfCurr1DaySesL; + u32 adslAtucPerfCurr1DayUasL; + u32 adslAtucPerfPrev1DayFastR; + u32 adslAtucPerfPrev1DayFailedFastR; + u32 adslAtucPerfPrev1DaySesL; + u32 adslAtucPerfPrev1DayUasL; + u32 flags; +} atucPerfDataExtEntry; + +#endif +//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry) + +typedef struct aturPerfDataEntry +{ + int ifIndex; + u32 adslAturPerfLofs; + u32 adslAturPerfLoss; + u32 adslAturPerfLprs; + u32 adslAturPerfESs; + int adslAturPerfValidIntervals; + int adslAturPerfInvalidIntervals; + AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAturPerfCurr15MinLofs; + PerfCurrentCount adslAturPerfCurr15MinLoss; + PerfCurrentCount adslAturPerfCurr15MinLprs; + PerfCurrentCount adslAturPerfCurr15MinESs; + AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAturPerfCurr1DayLofs; + AdslPerfCurrDayCount adslAturPerfCurr1DayLoss; + AdslPerfCurrDayCount adslAturPerfCurr1DayLprs; + AdslPerfCurrDayCount adslAturPerfCurr1DayESs; + int adslAturPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAturPerfPrev1DayLofs; + AdslPerfPrevDayCount adslAturPerfPrev1DayLoss; + AdslPerfPrevDayCount adslAturPerfPrev1DayLprs; + AdslPerfPrevDayCount adslAturPerfPrev1DayESs; + u32 flags; +} aturPerfDataEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct aturPerfDataExtEntry + { + int ifIndex; + u32 adslAturPerfStatSesL; + u32 adslAturPerfStatUasL; + u32 adslAturPerfCurr15MinSesL; + u32 adslAturPerfCurr15MinUasL; + u32 adslAturPerfCurr1DaySesL; + u32 adslAturPerfCurr1DayUasL; + u32 adslAturPerfPrev1DaySesL; + u32 adslAturPerfPrev1DayUasL; + u32 flags; +} aturPerfDataExtEntry; +#endif +//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo) + +typedef struct adslAtucIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount intervalLOF; + PerfIntervalCount intervalLOS; + PerfIntervalCount intervalES; + PerfIntervalCount intervalInits; + int intervalValidData; + u8 flags; +} adslAtucIntvlInfo; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslAtucInvtlExtInfo + { + int ifIndex; + int IntervalNumber; + u32 adslAtucIntervalFastR; + u32 adslAtucIntervalFailedFastR; + u32 adslAtucIntervalSesL; + u32 adslAtucIntervalUasL; + u32 flags; +} adslAtucInvtlExtInfo; +#endif +//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo) + +typedef struct adslAturIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount intervalLOF; + PerfIntervalCount intervalLOS; + PerfIntervalCount intervalLPR; + PerfIntervalCount intervalES; + int intervalValidData; + u8 flags; +} adslAturIntvlInfo; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslAturInvtlExtInfo + { + int ifIndex; + int IntervalNumber; + u32 adslAturIntervalSesL; + u32 adslAturIntervalUasL; + u32 flags; +} adslAturInvtlExtInfo; +#endif +//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry) + +typedef struct atucChannelPerfDataEntry +{ + int ifIndex; + u32 adslAtucChanReceivedBlks; + u32 adslAtucChanTransmittedBlks; + u32 adslAtucChanCorrectedBlks; + u32 adslAtucChanUncorrectBlks; + int adslAtucChanPerfValidIntervals; + int adslAtucChanPerfInvalidIntervals; + AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks; + AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks; + int adslAtucChanPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks; + u32 flags; +}atucChannelPerfDataEntry; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry) + +typedef struct aturChannelPerfDataEntry +{ + int ifIndex; + u32 adslAturChanReceivedBlks; + u32 adslAturChanTransmittedBlks; + u32 adslAturChanCorrectedBlks; + u32 adslAturChanUncorrectBlks; + int adslAturChanPerfValidIntervals; + int adslAturChanPerfInvalidIntervals; + AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks; + AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks; + int adslAturChanPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks; + u32 flags; +} aturChannelPerfDataEntry; + + +//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo) + +typedef struct adslAtucChanIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount chanIntervalRecvdBlks; + PerfIntervalCount chanIntervalXmitBlks; + PerfIntervalCount chanIntervalCorrectedBlks; + PerfIntervalCount chanIntervalUncorrectBlks; + int intervalValidData; + u8 flags; +} adslAtucChanIntvlInfo; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo) + +typedef struct adslAturChanIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount chanIntervalRecvdBlks; + PerfIntervalCount chanIntervalXmitBlks; + PerfIntervalCount chanIntervalCorrectedBlks; + PerfIntervalCount chanIntervalUncorrectBlks; + int intervalValidData; + u8 flags; +} adslAturChanIntvlInfo; + + +//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) +//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) + +typedef struct adslLineAlarmConfProfileEntry + { + unsigned char adslLineAlarmConfProfileName[32]; + int adslAtucThresh15MinLofs; + int adslAtucThresh15MinLoss; + int adslAtucThresh15MinESs; + u32 adslAtucThreshFastRateUp; + u32 adslAtucThreshInterleaveRateUp; + u32 adslAtucThreshFastRateDown; + u32 adslAtucThreshInterleaveRateDown; + int adslAtucInitFailureTrapEnable; + int adslAturThresh15MinLofs; + int adslAturThresh15MinLoss; + int adslAturThresh15MinLprs; + int adslAturThresh15MinESs; + u32 adslAturThreshFastRateUp; + u32 adslAturThreshInterleaveRateUp; + u32 adslAturThreshFastRateDown; + u32 adslAturThreshInterleaveRateDown; + int adslLineAlarmConfProfileRowStatus; + u32 flags; +} adslLineAlarmConfProfileEntry; + +#ifdef IFXMIPS_MEI_MIB_RFC3440 +typedef struct adslLineAlarmConfProfileExtEntry + { + u8 adslLineAlarmConfProfileExtName[32]; + u32 adslAtucThreshold15MinFailedFastR; + u32 adslAtucThreshold15MinSesL; + u32 adslAtucThreshold15MinUasL; + u32 adslAturThreshold15MinSesL; + u32 adslAturThreshold15MinUasL; + u32 flags; +} adslLineAlarmConfProfileExtEntry; +#endif +//TRAPS + +/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */ +typedef struct adslLineStatus + { + int adslModemStatus; + u32 adslModeSelected; + int adslAtucThresh15MinESs; + int adslTrellisCodeEnable; + int adslLatency; + u8 flags; + } adslLineStatusInfo; + +typedef struct adslLineRate + { + u32 adslDataRateds; + u32 adslDataRateus; + u32 adslATTNDRds; + u32 adslATTNDRus; + u8 flags; + } adslLineRateInfo; + +typedef struct adslLineInfo + { + u32 adslInterleaveDepthds; + u32 adslInterleaveDepthus; + u32 adslLATNds; + u32 adslLATNus; + u32 adslSATNds; + u32 adslSATNus; + int adslSNRMds; + int adslSNRMus; + int adslACATPds; + int adslACATPus; + u32 flags; + } adslLineInfo; + +typedef struct adslNearEndPerfStats + { + u32 adslSuperFrames; + u32 adslneLOS; + u32 adslneLOF; + u32 adslneLPR; + u32 adslneNCD; + u32 adslneLCD; + u32 adslneCRC; + u32 adslneRSCorr; + u32 adslneFECS; + u32 adslneES; + u32 adslneSES; + u32 adslneLOSS; + u32 adslneUAS; + u32 adslneHECErrors; + u32 flags; + } adslNearEndPerfStats; + +typedef struct adslFarEndPerfStats + { + u32 adslfeLOS; + u32 adslfeLOF; + u32 adslfeLPR; + u32 adslfeNCD; + u32 adslfeLCD; + u32 adslfeCRC; + u32 adslfeRSCorr; + u32 adslfeFECS; + u32 adslfeES; + u32 adslfeSES; + u32 adslfeLOSS; + u32 adslfeUAS; + u32 adslfeHECErrors; + u32 flags; + } adslFarEndPerfStats; + +/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */ +typedef struct adslATURSubcarrierInfo { + int ifindex; + u16 HLINSCds; + u16 HLINpsds[1024];/* Even index = real part; Odd Index + = imaginary part for each tone */ + u16 HLOGMTds; + u16 HLOGpsds[512]; + u16 QLNMTds; + u16 QLNpsds[512]; + u16 SNRMTds; + u16 SNRpsds[512]; + u16 BITpsds[512]; + s16 GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10. + Needs to be converted into linear scale*/ + u16 flags; +}adslATURSubcarrierInfo; + +typedef struct adslATUCSubcarrierInfo { + int ifindex; + u16 HLINSCus; + u16 HLINpsus[128];/* Even index = real part; Odd Index + = imaginary part for each tone */ + u16 HLOGMTus; + u16 HLOGpsus[64]; + u16 QLNMTus; + u16 QLNpsus[64]; + u16 SNRMTus; + u16 SNRpsus[64]; + u16 BITpsus[64]; + s16 GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10. + Needs to be converted into linear scale*/ + u16 flags; +}adslATUCSubcarrierInfo; + +#ifndef u_int16 +#define u_int16 u16 +#endif + +typedef struct adslInitStats { + u_int16 FullInitializationCount; + u_int16 FailedFullInitializationCount; + u_int16 LINIT_Errors; + u_int16 Init_Timeouts; +}adslInitStats; + +typedef struct adslPowerSpectralDensity { + int ACTPSDds; + int ACTPSDus; +}adslPowerSpectralDensity; + +//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags) +typedef union structpts { + adslLineTableEntry * adslLineTableEntry_pt; + adslAtucPhysEntry * adslAtucPhysEntry_pt; + adslAturPhysEntry * adslAturPhysEntry_pt; + adslAtucChanInfo * adslAtucChanInfo_pt; + adslAturChanInfo * adslAturChanInfo_pt; + atucPerfDataEntry * atucPerfDataEntry_pt; + aturPerfDataEntry * aturPerfDataEntry_pt; + adslAtucIntvlInfo * adslAtucIntvlInfo_pt; + adslAturIntvlInfo * adslAturIntvlInfo_pt; + atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt; + aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt; + adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt; + adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt; + adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt; + // RFC 3440 + + #ifdef IFXMIPS_MEI_MIB_RFC3440 + adslLineExtTableEntry * adslLineExtTableEntry_pt; + atucPerfDataExtEntry * atucPerfDataExtEntry_pt; + adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt; + aturPerfDataExtEntry * aturPerfDataExtEntry_pt; + adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt; + adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt; + #endif + adslLineStatusInfo * adslLineStatusInfo_pt; + adslLineRateInfo * adslLineRateInfo_pt; + adslLineInfo * adslLineInfo_pt; + adslNearEndPerfStats * adslNearEndPerfStats_pt; + adslFarEndPerfStats * adslFarEndPerfStats_pt; + adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt; + adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt; + adslPowerSpectralDensity * adslPowerSpectralDensity_pt; +}structpts; + +#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */ diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h new file mode 100644 index 0000000000..c34662013c --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h @@ -0,0 +1,308 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_bsp.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_BSP_H_ +#define _IFXMIPS_MEI_BSP_H_ + +/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ +#define MEI_DATA_XFR_OFFSET (0x0000) +#define MEI_VERSION_OFFSET (0x0004) +#define MEI_ARC_GP_STAT_OFFSET (0x0008) +#define MEI_DATA_XFR_STAT_OFFSET (0x000C) +#define MEI_XFR_ADDR_OFFSET (0x0010) +#define MEI_MAX_WAIT_OFFSET (0x0014) +#define MEI_TO_ARC_INT_OFFSET (0x0018) +#define ARC_TO_MEI_INT_OFFSET (0x001C) +#define ARC_TO_MEI_INT_MASK_OFFSET (0x0020) +#define MEI_DEBUG_WAD_OFFSET (0x0024) +#define MEI_DEBUG_RAD_OFFSET (0x0028) +#define MEI_DEBUG_DATA_OFFSET (0x002C) +#define MEI_DEBUG_DEC_OFFSET (0x0030) +#define MEI_CONFIG_OFFSET (0x0034) +#define MEI_RST_CONTROL_OFFSET (0x0038) +#define MEI_DBG_MASTER_OFFSET (0x003C) +#define MEI_CLK_CONTROL_OFFSET (0x0040) +#define MEI_BIST_CONTROL_OFFSET (0x0044) +#define MEI_BIST_STAT_OFFSET (0x0048) +#define MEI_XDATA_BASE_SH_OFFSET (0x004c) +#define MEI_XDATA_BASE_OFFSET (0x0050) +#define MEI_XMEM_BAR_BASE_OFFSET (0x0054) +#define MEI_XMEM_BAR0_OFFSET (0x0054) +#define MEI_XMEM_BAR1_OFFSET (0x0058) +#define MEI_XMEM_BAR2_OFFSET (0x005C) +#define MEI_XMEM_BAR3_OFFSET (0x0060) +#define MEI_XMEM_BAR4_OFFSET (0x0064) +#define MEI_XMEM_BAR5_OFFSET (0x0068) +#define MEI_XMEM_BAR6_OFFSET (0x006C)) +#define MEI_XMEM_BAR7_OFFSET (0x0070) +#define MEI_XMEM_BAR8_OFFSET (0x0074) +#define MEI_XMEM_BAR9_OFFSET (0x0078) +#define MEI_XMEM_BAR10_OFFSET (0x007C) +#define MEI_XMEM_BAR11_OFFSET (0x0080) +#define MEI_XMEM_BAR12_OFFSET (0x0084) +#define MEI_XMEM_BAR13_OFFSET (0x0088) +#define MEI_XMEM_BAR14_OFFSET (0x008C) +#define MEI_XMEM_BAR15_OFFSET (0x0090) +#define MEI_XMEM_BAR16_OFFSET (0x0094) + +#define WHILE_DELAY 20000 +/* +** Define where in ME Processor's memory map the Stratify chip lives +*/ + +#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) + +// Mailboxes +#define MSG_LENGTH 16 // x16 bits +#define YES_REPLY 1 +#define NO_REPLY 0 + +#define CMV_TIMEOUT 1000 //jiffies + +// Block size per BAR +#define SDRAM_SEGMENT_SIZE (64*1024) +// Number of Bar registers +#define MAX_BAR_REGISTERS (17) + +#define XDATA_REGISTER (15) + +#define IFXMIPS_MEI_IOCTL_CMV_WINHOST IFX_ADSL_IOC_CMV_WINHOST + +#define IFXMIPS_MEI_IOCTL_CMV_READ IFX_ADSL_IOC_CMV_READ +#define IFXMIPS_MEI_IOCTL_CMV_WRITE IFX_ADSL_IOC_CMV_WRITE + +#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS IFX_ADSL_IOC_GET_BASE_ADDRESS + +// ARC register addresss +#define ARC_STATUS 0x0 +#define ARC_LP_START 0x2 +#define ARC_LP_END 0x3 +#define ARC_DEBUG 0x5 +#define ARC_INT_MASK 0x10A + +#define IRAM0_BASE (0x00000) +#define IRAM1_BASE (0x04000) +#define BRAM_BASE (0x0A000) + +#define ADSL_BASE (0x20000) +#define CRI_BASE (ADSL_BASE + 0x11F00) +#define CRI_CCR0 (CRI_BASE + 0x00) +#define CRI_RST (CRI_BASE + 0x04*4) +#define ADSL_DILV_BASE (ADSL_BASE+0x20000) + +// +#define IRAM0_ADDR_BIT_MASK 0xFFF +#define IRAM1_ADDR_BIT_MASK 0xFFF +#define BRAM_ADDR_BIT_MASK 0xFFF +#define RX_DILV_ADDR_BIT_MASK 0x1FFF + +/*** Bit definitions ***/ + +#define FALSE 0 +#define TRUE 1 +#define BIT0 1<<0 +#define BIT1 1<<1 +#define BIT2 1<<2 +#define BIT3 1<<3 +#define BIT4 1<<4 +#define BIT5 1<<5 +#define BIT6 1<<6 +#define BIT7 1<<7 +#define BIT8 1<<8 +#define BIT9 1<<9 +#define BIT10 1<<10 +#define BIT11 1<<11 +#define BIT12 1<<12 +#define BIT13 1<<13 +#define BIT14 1<<14 +#define BIT15 1<<15 +#define BIT16 1<<16 +#define BIT17 1<<17 +#define BIT18 1<<18 +#define BIT19 1<<19 +#define BIT20 1<<20 +#define BIT21 1<<21 +#define BIT22 1<<22 +#define BIT23 1<<23 +#define BIT24 1<<24 +#define BIT25 1<<25 +#define BIT26 1<<26 +#define BIT27 1<<27 +#define BIT28 1<<28 +#define BIT29 1<<29 +#define BIT30 1<<30 +#define BIT31 1<<31 + +// CRI_CCR0 Register definitions +#define CLK_2M_MODE_ENABLE BIT6 +#define ACL_CLK_MODE_ENABLE BIT4 +#define FDF_CLK_MODE_ENABLE BIT2 +#define STM_CLK_MODE_ENABLE BIT0 + +// CRI_RST Register definitions +#define FDF_SRST BIT3 +#define MTE_SRST BIT2 +#define FCI_SRST BIT1 +#define AAI_SRST BIT0 + +// MEI_TO_ARC_INTERRUPT Register definitions +#define MEI_TO_ARC_INT1 BIT3 +#define MEI_TO_ARC_INT0 BIT2 +#define MEI_TO_ARC_CS_DONE BIT1 //need to check +#define MEI_TO_ARC_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT Register definitions +#define ARC_TO_MEI_INT1 BIT8 +#define ARC_TO_MEI_INT0 BIT7 +#define ARC_TO_MEI_CS_REQ BIT6 +#define ARC_TO_MEI_DBG_DONE BIT5 +#define ARC_TO_MEI_MSGACK BIT4 +#define ARC_TO_MEI_NO_ACCESS BIT3 +#define ARC_TO_MEI_CHECK_AAITX BIT2 +#define ARC_TO_MEI_CHECK_AAIRX BIT1 +#define ARC_TO_MEI_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT_MASK Register definitions +#define GP_INT1_EN BIT8 +#define GP_INT0_EN BIT7 +#define CS_REQ_EN BIT6 +#define DBG_DONE_EN BIT5 +#define MSGACK_EN BIT4 +#define NO_ACC_EN BIT3 +#define AAITX_EN BIT2 +#define AAIRX_EN BIT1 +#define MSGAV_EN BIT0 + +#define MEI_SOFT_RESET BIT0 + +#define HOST_MSTR BIT0 + +#define JTAG_MASTER_MODE 0x0 +#define MEI_MASTER_MODE HOST_MSTR + +// MEI_DEBUG_DECODE Register definitions +#define MEI_DEBUG_DEC_MASK (0x3) +#define MEI_DEBUG_DEC_AUX_MASK (0x0) +#define MEI_DEBUG_DEC_DMP1_MASK (0x1) +#define MEI_DEBUG_DEC_DMP2_MASK (0x2) +#define MEI_DEBUG_DEC_CORE_MASK (0x3) + +#define AUX_STATUS (0x0) +// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate +// page swap requests. +#define MEI_TO_ARC_MAILBOX (0xDFD0) +#define MEI_TO_ARC_MAILBOXR (MEI_TO_ARC_MAILBOX + 0x2C) + +#define ARC_TO_MEI_MAILBOX (0xDFA0) +#define ARC_MEI_MAILBOXR (ARC_TO_MEI_MAILBOX + 0x2C) + +// Codeswap request messages are indicated by setting BIT31 +#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) + +// Clear Eoc messages received are indicated by setting BIT17 +#define OMB_CLEAREOC_INTERRUPT_CODE (0x00020000) + +/* +** Swap page header +*/ +// Page must be loaded at boot time if size field has BIT31 set +#define BOOT_FLAG (BIT31) +#define BOOT_FLAG_MASK ~BOOT_FLAG + +#define FREE_RELOAD 1 +#define FREE_SHOWTIME 2 +#define FREE_ALL 3 + +// marcos +#define IFXMIPS_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data);} while (0) +#define IFXMIPS_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) +#define SET_BIT(reg, mask) reg |= (mask) +#define CLEAR_BIT(reg, mask) reg &= (~mask) +#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) +#define SET_BITS(reg, mask) SET_BIT(reg, mask) +#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} + +#define ALIGN_SIZE ( 1L<<10 ) //1K size align +#define MEM_ALIGN(addr) (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) ) + +// swap marco +#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);} +#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);} + +// Swap page header describes size in 32-bit words, load location, and image offset +// for program and/or data segments +typedef struct _arc_swp_page_hdr { + u32 p_offset; //Offset bytes of progseg from beginning of image + u32 p_dest; //Destination addr of progseg on processor + u32 p_size; //Size in 32-bitwords of program segment + u32 d_offset; //Offset bytes of dataseg from beginning of image + u32 d_dest; //Destination addr of dataseg on processor + u32 d_size; //Size in 32-bitwords of data segment +} ARC_SWP_PAGE_HDR; + +/* +** Swap image header +*/ +#define GET_PROG 0 // Flag used for program mem segment +#define GET_DATA 1 // Flag used for data mem segment + +// Image header contains size of image, checksum for image, and count of +// page headers. Following that are 'count' page headers followed by +// the code and/or data segments to be loaded +typedef struct _arc_img_hdr { + u32 size; // Size of binary image in bytes + u32 checksum; // Checksum for image + u32 count; // Count of swp pages in image + ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy +} ARC_IMG_HDR; + +typedef struct smmu_mem_info { + int type; + unsigned long nCopy; + unsigned long size; + unsigned char *address; + unsigned char *org_address; +} smmu_mem_info_t; + +typedef struct ifxmips_mei_device_private { + int modem_ready; + int arcmsgav; + int cmv_reply; + int cmv_waiting; + // Mei to ARC CMV count, reply count, ARC Indicator count + int indicator_count; + int cmv_count; + int reply_count; + unsigned long image_size; + int nBar; + u16 Recent_indicator[MSG_LENGTH]; + + u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4))); + + smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS]; + ARC_IMG_HDR *img_hdr; + // to wait for arc cmv reply, sleep on wait_queue_arcmsgav; + wait_queue_head_t wait_queue_arcmsgav; + wait_queue_head_t wait_queue_modemready; + MEI_mutex_t mei_cmv_sema; +} ifxmips_mei_device_private_t; + +#endif //_IFXMIPS_MEI_BSP_H_ diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h new file mode 100644 index 0000000000..d11f04ea97 --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h @@ -0,0 +1,734 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_ioctl.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#ifndef _IFXMIPS_MEI_IOCTL_H +#define _IFXMIPS_MEI_IOCTL_H + +///////////////////////////////////////////////////////////////////////////////////////////////////// +#define PCM_BUFF_SIZE 1024 //bytes +// interrupt numbers + +#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP)) + +// Number of intervals +#define INTERVAL_NUM 192 //two days +typedef struct ifxmips_mei_mib { + struct list_head list; + struct timeval start_time; //start of current interval + + int AtucPerfLof; + int AtucPerfLos; + int AtucPerfEs; + int AtucPerfInit; + + int AturPerfLof; + int AturPerfLos; + int AturPerfLpr; + int AturPerfEs; + + int AturChanPerfRxBlk; + int AturChanPerfTxBlk; + int AturChanPerfCorrBlk; + int AturChanPerfUncorrBlk; + + //RFC-3440 + int AtucPerfStatFastR; + int AtucPerfStatFailedFastR; + int AtucPerfStatSesL; + int AtucPerfStatUasL; + int AturPerfStatSesL; + int AturPerfStatUasL; +} ifxmips_mei_mib; + +typedef struct adslChanPrevTxRate { + u32 adslAtucChanPrevTxRate; + u32 adslAturChanPrevTxRate; +} adslChanPrevTxRate; + +typedef struct adslPhysCurrStatus { + u32 adslAtucCurrStatus; + u32 adslAturCurrStatus; +} adslPhysCurrStatus; + +typedef struct ChanType { + int interleave; + int fast; + int bearchannel0; + int bearchannel1; +} ChanType; + +typedef struct mib_previous_read { + u16 ATUC_PERF_ESS; + u16 ATUR_PERF_ESS; + u32 ATUR_CHAN_RECV_BLK; + u16 ATUR_CHAN_CORR_BLK_INTL; + u16 ATUR_CHAN_CORR_BLK_FAST; + u16 ATUR_CHAN_UNCORR_BLK_INTL; + u16 ATUR_CHAN_UNCORR_BLK_FAST; + u16 ATUC_PERF_STAT_FASTR; + u16 ATUC_PERF_STAT_FAILED_FASTR; + u16 ATUC_PERF_STAT_SESL; + u16 ATUC_PERF_STAT_UASL; + u16 ATUR_PERF_STAT_SESL; +} mib_previous_read; + +typedef struct mib_flags_pretime { + struct timeval ATUC_PERF_LOSS_PTIME; + struct timeval ATUC_PERF_LOFS_PTIME; + struct timeval ATUR_PERF_LOSS_PTIME; + struct timeval ATUR_PERF_LOFS_PTIME; + struct timeval ATUR_PERF_LPR_PTIME; +} mib_flags_pretime; + + // cmv message structures +#define MP_PAYLOAD_SIZE 12 +typedef struct mpmessage { + u16 iFunction; + u16 iGroup; + u16 iAddress; + u16 iIndex; + u16 iPayload[MP_PAYLOAD_SIZE]; +} MPMessage; +#endif + +typedef struct meireg { + u32 iAddress; + u32 iData; +} meireg; + +#define MEIDEBUG_BUFFER_SIZES 50 +typedef struct meidebug { + u32 iAddress; + u32 iCount; + u32 buffer[MEIDEBUG_BUFFER_SIZES]; +} meidebug; + +//============================================================================== +// Group definitions +//============================================================================== +#define OPTN 5 +#define CNFG 8 +#define CNTL 1 +#define STAT 2 +#define RATE 6 +#define PLAM 7 +#define INFO 3 +#define TEST 4 +//============================================================================== +// Opcode definitions +//============================================================================== +#define H2D_CMV_READ 0x00 +#define H2D_CMV_WRITE 0x04 +#define H2D_CMV_INDICATE_REPLY 0x10 +#define H2D_ERROR_OPCODE_UNKNOWN 0x20 +#define H2D_ERROR_CMV_UNKNOWN 0x30 + +#define D2H_CMV_READ_REPLY 0x01 +#define D2H_CMV_WRITE_REPLY 0x05 +#define D2H_CMV_INDICATE 0x11 +#define D2H_ERROR_OPCODE_UNKNOWN 0x21 +#define D2H_ERROR_CMV_UNKNOWN 0x31 +#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 +#define D2H_ERROR_CMV_WRITE_ONLY 0x51 +#define D2H_ERROR_CMV_READ_ONLY 0x61 + +#define H2D_DEBUG_READ_DM 0x02 +#define H2D_DEBUG_READ_PM 0x06 +#define H2D_DEBUG_WRITE_DM 0x0a +#define H2D_DEBUG_WRITE_PM 0x0e + +#define D2H_DEBUG_READ_DM_REPLY 0x03 +#define D2H_DEBUG_READ_FM_REPLY 0x07 +#define D2H_DEBUG_WRITE_DM_REPLY 0x0b +#define D2H_DEBUG_WRITE_FM_REPLY 0x0f +#define D2H_ERROR_ADDR_UNKNOWN 0x33 + +#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 +//============================================================================== +// INFO register address field definitions +//============================================================================== + +#define INFO_TxState 0 +#define INFO_RxState 1 +#define INFO_TxNextState 2 +#define INFO_RxNextState 3 +#define INFO_TxStateJumpFrom 4 +#define INFO_RxStateJumpFrom 5 + +#define INFO_ReverbSnrBuf 8 +#define INFO_ReverbEchoSnrBuf 9 +#define INFO_MedleySnrBuf 10 +#define INFO_RxShowtimeSnrBuf 11 +#define INFO_DECdelay 12 +#define INFO_DECExponent 13 +#define INFO_DECTaps 14 +#define INFO_AECdelay 15 +#define INFO_AECExponent 16 +#define INFO_AECTaps 17 +#define INFO_TDQExponent 18 +#define INFO_TDQTaps 19 +#define INFO_FDQExponent 20 +#define INFO_FDQTaps 21 +#define INFO_USBat 22 +#define INFO_DSBat 23 +#define INFO_USFineGains 24 +#define INFO_DSFineGains 25 +#define INFO_BitloadFirstChannel 26 +#define INFO_BitloadLastChannel 27 +#define INFO_PollEOCData 28 // CO specific +#define INFO_CSNRMargin 29 // CO specific +#define INFO_RCMsgs1 30 +#define INFO_RMsgs1 31 +#define INFO_RMsgRA 32 +#define INFO_RCMsgRA 33 +#define INFO_RMsg2 34 +#define INFO_RCMsg2 35 +#define INFO_BitLoadOK 36 +#define INFO_RCRates1 37 +#define INFO_RRates1Tab 38 +#define INFO_RMsgs1Tab 39 +#define INFO_RMsgRATab 40 +#define INFO_RRatesRA 41 +#define INFO_RCRatesRA 42 +#define INFO_RRates2 43 +#define INFO_RCRates2 44 +#define INFO_PackedRMsg2 45 +#define INFO_RxBitSwapFlag 46 +#define INFO_TxBitSwapFlag 47 +#define INFO_ShowtimeSNRUpdateCount 48 +#define INFO_ShowtimeFDQUpdateCount 49 +#define INFO_ShowtimeDECUpdateCount 50 +#define INFO_CopyRxBuffer 51 +#define INFO_RxToneBuf 52 +#define INFO_TxToneBuf 53 +#define INFO_Version 54 +#define INFO_TimeStamp 55 +#define INFO_feVendorID 56 +#define INFO_feSerialNum 57 +#define INFO_feVersionNum 58 +#define INFO_BulkMemory 59 //Points to start of bulk memory +#define INFO_neVendorID 60 +#define INFO_neVersionNum 61 +#define INFO_neSerialNum 62 + +//============================================================================== +// RATE register address field definitions +//============================================================================== + +#define RATE_UsRate 0 +#define RATE_DsRate 1 + +//============================================================================== +// PLAM (Physical Layer Management) register address field definitions +// (See G997.1 for reference) +//============================================================================== + + // /// + // Failure Flags /// + // /// + +#define PLAM_NearEndFailureFlags 0 +#define PLAM_FarEndFailureFlags 1 + + // /// + // Near End Failure Flags Bit Definitions /// + // /// + +// ADSL Failures /// +#define PLAM_LOS_FailureBit 0x0001 +#define PLAM_LOF_FailureBit 0x0002 +#define PLAM_LPR_FailureBit 0x0004 +#define PLAM_RFI_FailureBit 0x0008 + +// ATM Failures /// +#define PLAM_NCD_LP0_FailureBit 0x0010 +#define PLAM_NCD_LP1_FailureBit 0x0020 +#define PLAM_LCD_LP0_FailureBit 0x0040 +#define PLAM_LCD_LP1_FailureBit 0x0080 + +#define PLAM_NCD_BC0_FailureBit 0x0100 +#define PLAM_NCD_BC1_FailureBit 0x0200 +#define PLAM_LCD_BC0_FailureBit 0x0400 +#define PLAM_LCD_BC1_FailureBit 0x0800 + // /// + // Performance Counts /// + // /// + +#define PLAM_NearEndCrcCnt 2 +#define PLAM_CorrectedRSErrors 3 + +#define PLAM_NearEndECSCnt 6 +#define PLAM_NearEndESCnt 7 +#define PLAM_NearEndSESCnt 8 +#define PLAM_NearEndLOSSCnt 9 +#define PLAM_NearEndUASLCnt 10 + +#define PLAM_NearEndHECErrCnt 11 + +#define PLAM_NearEndHECTotCnt 16 +#define PLAM_NearEndCellTotCnt 18 +#define PLAM_NearEndSfCntLSW 20 +#define PLAM_NearEndSfCntMSW 21 + +#define PLAM_FarEndFebeCnt 24 + +#define PLAM_FarEndFecCnt 28 + +#define PLAM_FarEndFECSCnt 32 +#define PLAM_FarEndESCnt 33 +#define PLAM_FarEndSESCnt 34 +#define PLAM_FarEndLOSSCnt 35 +#define PLAM_FarEndUASLCnt 36 + +#define PLAM_FarEndHECErrCnt 37 + +#define PLAM_FarEndHECTotCnt 41 + +#define PLAM_FarEndCellTotCnt 43 + +#define PLAM_SNRMargin_0_1db 45 + +#define PLAM_SNRMargin 46 + +//============================================================================== +// CNTL register address and bit field definitions +//============================================================================== + +#define CNTL_ModemControl 0 + +#define CNTL_ModemReset 0x0 +#define CNTL_ModemStart 0x2 + +//============================================================================== +// STAT register address and bit field definitions +//============================================================================== + +#define STAT_MacroState 0 +#define STAT_Mode 1 +#define STAT_DMTFramingMode 2 +#define STAT_SleepState 3 +#define STAT_Misc 4 +#define STAT_FailureState 5 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_OLRStatus provides status of OLR + //16-bit STAT_OLRStatus_DS + // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted + // [3:2]: Reserved + // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) + // [7:6]: Reserved + // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). + // [11]: 1=Receive Response, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_OLRStatus_DS 6 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_OLRStatus provides status of OLR + // 16-bit STAT_OLRStatus_US CMV + // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted + // [3:2]: Reserved + // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) + // [7:6]: Reserved + // [8]: 1=Request Received. 0=not. + // [10:9]: Reserved + // [11]: 1=Response Sent, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/// +#define STAT_OLRStatus_US 7 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_PMStatus provides status of PM + // 16-bit STAT_PMStatus CMV + // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted + // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM + // [3]: Reserved + // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) + // [7:6]: Reserved + // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). + // [11]: 1=Response, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_PMStatus 8 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError + // [3:0]: OLR/PM response reason code + // [7:4]: OLR/PM Internal error code + // [15:8]: OLR/PM Reserved for future + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_OLRError_DS 9 +#define STAT_OLRError_US 10 +#define STAT_PMError 11 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_MacroState +// MacroState reflects the high level state of the modem + +#define STAT_InitState 0x0000 +#define STAT_ReadyState 0x0001 +#define STAT_FailState 0x0002 +#define STAT_IdleState 0x0003 +#define STAT_QuietState 0x0004 +#define STAT_GhsState 0x0005 +#define STAT_FullInitState 0x0006 +#define STAT_ShowTimeState 0x0007 +#define STAT_FastRetrainState 0x0008 +#define STAT_LoopDiagMode 0x0009 +#define STAT_ShortInit 0x000A // Bis short initialization /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_Mode +// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use +// G.Hs or some other mechanism to negotiate the specific mode of operation. +// The OPTN_modeControl CMV is used to select a set of desired modes. +// The STAT_Mode CMV indicates which mode was actually selected. + +#define STAT_ConfigMode_T1413 0x0001 +#define STAT_ConfigMode_G992_2_AB 0x0002 +#define STAT_ConfigMode_G992_1_A 0x0004 +#define STAT_ConfigMode_G992_1_B 0x0008 +#define STAT_ConfigMode_G992_1_C 0x0010 +#define STAT_ConfigMode_G992_2_C 0x0020 + +#define STAT_ConfigMode_G992_3_A 0x0100 +#define STAT_ConfigMode_G992_3_B 0x0200 +#define STAT_ConfigMode_G992_3_I 0x0400 +#define STAT_ConfigMode_G992_3_J 0x0800 +#define STAT_ConfigMode_G992_3_L 0x1000 + +#define STAT_ConfigMode_G992_4_A 0x2000 +#define STAT_ConfigMode_G992_4_I 0x4000 + +#define STAT_ConfigMode_G992_5 0x8000 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_DMTFramingMode +// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode +// status is not applicable in BIS mode and its value is undefined +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_FramingModeMask 0x0003 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_Misc +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_OverlappedSpectrum 0x0008 +#define STAT_TCM 0x0010 +#define STAT_TDQ_at_1104 0x0020 +#define STAT_T1413_Signal_Detected 0x0040 +#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 +#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_FailureState +// when the MacroSTate indicates the fail state, FailureState provides a failure code +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define E_CODE_NO_ERROR 0 +#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ +#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ +#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ +#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 +#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ +#define E_CODE_BITLOAD 6 // bit loading fails */ +#define E_CODE_ST_ERROR 7 // showtime CRC error */ +#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ +#define E_CODE_C_TONES 9 // detected C_TONES */ +#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ +#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ +#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ +#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ +#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ +#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ +#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ +#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ +#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ +#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ +#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ +#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ +#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ +#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ +#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ +#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ +#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ +#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ +#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ +#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ +#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ +#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ +#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ +#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ +#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ +#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ +#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ +#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ +#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ +#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ +#define E_CODE_BAD_MEM_ACCESS 46 +#define E_CODE_BAD_INSTRUCTION_ACCESS 47 +#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 +#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 +#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//STAT_OLRStatus: +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_OLRPM_IDLE 0x0000 +#define STAT_OLRPM_IN_PROGRESS 0x0001 +#define STAT_OLRPM_COMPLETE 0x0002 +#define STAT_OLRPM_ABORTED 0x0003 +#define STAT_OLRPM_RESPONSE 0x0800 + +#define STAT_OLR_BITSWAP 0x0010 +#define STAT_OLR_DRR 0x0020 +#define STAT_OLR_SRA 0x0030 + +//STAT_PMStatus_US: +#define STAT_PM_CO_REQ 0x0004 +#define STAT_PM_SIMPLE_REQ 0x0010 +#define STAT_PM_L2_REQ 0x0020 +#define STAT_PM_L2_TRIM_REQ 0x0030 + +// STAT_OLRError_DS, STAT_OLRError_US +//4 bit response reason code: +#define RESP_BUSY 0x01 +#define RESP_INVALID_PARAMETERS 0x02 +#define RESP_NOT_ENABLED 0x03 +#define RESP_NOT_SUPPORTED 0x04 + +//4 bit internal error code (common for OLR and PM) +#define REQ_INVALID_BiGi 0x10 +#define REQ_INVALID_Lp 0x20 +#define REQ_INVALID_Bpn 0x30 +#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 +#define REQ_NOT_IN_L0_STATE 0x50 +#define REQ_NOT_IN_L2_STATE 0x60 +#define REQ_INVALID_PCB 0x70 +#define REQ_VIOLATES_MARGIN 0x80 + +//STAT_PMError +//4 bit response reason code: +#define RESP_STATE_NOT_DESIRED 0x03 +#define RESP_INFEASIBLE_PARAMETERS 0x04 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN register address and bit field definitions +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_ModeControl 0 +#define OPTN_DMTLnkCtl 1 +// Reserved 2 +#define OPTN_GhsControl 3 +// Reserved 4 +#define OPTN_PwrManControl 5 +#define OPTN_AnnexControl 6 +#define OPTN_ModeControl1 7 +// Reserved 8 +#define OPTN_StateMachineCtrl 9 +// Reserved 10 +// Reserved 11 +#define OPTN_BisLinkControl 12 +#define OPTN_ATMAddrConfig 13 +#define OPTN_ATMNumCellConfig 14 + +// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// +// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// +// The OPTN_ModeControl CMV is used to select a set of desired modes /// +// The STAT_ModeControl CMV indicates which mode was actually selected /// + +// OPTN_ModeControl +#define OPTN_ConfigMode_T1413 0x0001 +#define OPTN_ConfigMode_G992_2_AB 0x0002 +#define OPTN_ConfigMode_G992_1_A 0x0004 +#define OPTN_ConfigMode_G992_1_B 0x0008 +#define OPTN_ConfigMode_G992_1_C 0x0010 +#define OPTN_ConfigMode_G992_2_C 0x0020 + +#define OPTN_ConfigMode_G992_3_A 0x0100 +#define OPTN_ConfigMode_G992_3_B 0x0200 +#define OPTN_ConfigMode_G992_3_I 0x0400 +#define OPTN_ConfigMode_G992_3_J 0x0800 +#define OPTN_ConfigMode_G992_3_L 0x1000 + +#define OPTN_ConfigMode_G992_4_A 0x2000 +#define OPTN_ConfigMode_G992_4_I 0x4000 + +#define OPTN_ConfigMode_G992_5 0x8000 + +// OPTN_PwrManControl +#define OPTN_PwrManWakeUpGhs 0x1 +#define OPTN_PwrManWakeUpFR 0x2 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_DMT Link Control +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define OPTN_DMT_DualLatency_Dis 0x200 +#define OPTN_DMT_S_Dis 0x100 +#define OPTN_DMT_FRAMINGMODE 0x1 +#define OPTN_DMT_FRAMINGMODE_MASK 0x7 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_BIS Link Control +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define OPTN_BisLinkContrl_LineProbeDis 0x1 +#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 +#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_GhsControl +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// +// for OPTN_GhsControl, we will assign 16bit word as follows +// bit 0~3: set the control over which start(initial) message CPE will send: +// +// BIT: 2 1 0 +// 0 0 1 CLR +// 0 1 0 MR +// 0 1 1 MS +// 1 0 0 MP +// +// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange +// BIT: 5 4 +// 0 1 MS +// 1 0 MR +// 1 1 MP +// +// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. +// BIT: 15 +// 1 means session one +// +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_GHS_ST_GHS 0x8000 +#define OPTN_GHS_INIT_MASK 0x000F +#define OPTN_GHS_RESP_MASK 0x00F0 + +#define OPTN_RTInitTxMsg_CLR 0x0001 +#define OPTN_RTInitTxMsg_MR 0x0002 +#define OPTN_RTInitTxMsg_MS 0x0003 +#define OPTN_RTInitTxMsg_MP 0x0004 + +#define OPTN_RTRespTxMsg_MS 0x0010 +#define OPTN_RTRespTxMsg_MR 0x0020 +#define OPTN_RTRespTxMsg_MP 0x0030 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_AnnexControl +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +// G.992.3 Annex A/L1/L2 US PSD Mask preferred + +#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 +#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// +#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// +#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//OPTN_ATMAddrConfig +// Bits 4:0 are Utopia address for BC1 +// Bits 9:5 are Utopia address for BC0 +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_UTPADDR_BC1 0x001F +#define OPTN_UTPADDR_BC0 0x03E0 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//OPTN_ATMNumCellConfig +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// +#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// CNFG register address field /// +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +/////////////////////////////////////////// +// these cmvs are used by bis handshake /// +/////////////////////////////////////////// + +// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) +#define CNFG_TPS_TC_DS0 0 +#define CNFG_TPS_TC_DS1 1 +#define CNFG_TPS_TC_US0 2 +#define CNFG_TPS_TC_US1 3 + +#define CNFG_HDLC_Overhead_Requirements 4 + +// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) +#define CNFG_PMS_TC_DS0 5 +#define CNFG_PMS_TC_DS1 6 +#define CNFG_PMS_TC_US0 7 +#define CNFG_PMS_TC_US1 8 + +// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) +#define CNFG_PMD_PARAMETERS 9 + +//////////////////////////////////////////////////////////// +// these cmvs are used by bis training and showtime code /// +//////////////////////////////////////////////////////////// + +//////////////// +// Tx Config /// +//////////////// +#define CNFG_tx_Cnfg_Nbc 10 +#define CNFG_tx_Cnfg_Nlp 11 +#define CNFG_tx_Cnfg_Rp 12 +#define CNFG_tx_Cnfg_Mp 13 +#define CNFG_tx_Cnfg_Lp 14 +#define CNFG_tx_Cnfg_Tp 15 +#define CNFG_tx_Cnfg_Dp 16 +#define CNFG_tx_Cnfg_Bpn 17 +#define CNFG_tx_Cnfg_FramingMode 18 +#define CNFG_tx_Cnfg_MSGLp 19 +#define CNFG_tx_Cnfg_MSGc 20 + +//////////////// +// Rx Config /// +//////////////// +#define CNFG_rx_Cnfg_Nbc 21 +#define CNFG_rx_Cnfg_Nlp 22 +#define CNFG_rx_Cnfg_Rp 23 +#define CNFG_rx_Cnfg_Mp 24 +#define CNFG_rx_Cnfg_Lp 25 +#define CNFG_rx_Cnfg_Tp 26 +#define CNFG_rx_Cnfg_Dp 27 +#define CNFG_rx_Cnfg_Bpn 28 +#define CNFG_rx_Cnfg_FramingMode 29 +#define CNFG_rx_Cnfg_MSGLp 30 +#define CNFG_rx_Cnfg_MSGc 31 + +#define CNFG_tx_Cnfg_BCnToLPp 32 +#define CNFG_rx_Cnfg_BCnToLPp 33 + +#endif diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h new file mode 100644 index 0000000000..b1c12d1d01 --- /dev/null +++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h @@ -0,0 +1,111 @@ +/****************************************************************************** +** +** FILE NAME : ifxmips_mei_linux.h +** PROJECT : Danube +** MODULES : MEI +** +** DATE : 1 Jan 2006 +** AUTHOR : TC Chen +** DESCRIPTION : MEI Driver +** COPYRIGHT : Copyright (c) 2006 +** Infineon Technologies AG +** Am Campeon 1-12, 85579 Neubiberg, Germany +** +** This program is free software; you can redistribute it and/or modify +** it under the terms of the GNU General Public License as published by +** the Free Software Foundation; either version 2 of the License, or +** (at your option) any later version. +** +** HISTORY +** $Version $Date $Author $Comment +*******************************************************************************/ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/version.h> +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <asm/semaphore.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <asm/uaccess.h> + +#undef CONFIG_DEVFS_FS //165204:henryhsu devfs will make mei open file fail. + +#ifdef CONFIG_DEVFS_FS +#include <linux/devfs_fs_kernel.h> +#endif +#ifdef CONFIG_PROC_FS +#include <linux/proc_fs.h> +#endif + +#include <linux/list.h> +#include <linux/delay.h> +#define __LINUX__ + +#ifdef CONFIG_PROC_FS +#define PROC_ITEMS 8 +#define MEI_DIRNAME "mei" +#endif + +#include <asm/ifxmips/ifxmips.h> +#include <asm/ifxmips/ifxmips_irq.h> +#include <asm/ifxmips/ifxmips_mei.h> +#include <asm/ifxmips/ifxmips_mei_app.h> +#include <asm/ifxmips/ifxmips_mei_ioctl.h> +#include <asm/ifxmips/ifxmips_mei_app_ioctl.h> +#include <asm/ifxmips/ifxmips_gpio.h> +#include <asm/ifxmips/ifxmips_led.h> + +#ifdef CONFIG_DEVFS_FS +#define IFXMIPS_DEVNAME "ifxmips" +#endif //ifdef CONFIG_DEVFS_FS + +#define MEI_LOCKINT(var) \ + local_save_flags(var);\ + local_irq_disable() +#define MEI_UNLOCKINT(var) \ + local_irq_restore(var) + +#define MEI_MUTEX_INIT(id,flag) \ + sema_init(&id,flag) +#define MEI_MUTEX_LOCK(id) \ + down_interruptible(&id) +#define MEI_MUTEX_UNLOCK(id) \ + up(&id) + +#define MEI_MASK_AND_ACK_IRQ \ + mask_and_ack_ifxmips_irq + +#define MEI_DISABLE_IRQ \ + disable_irq +#define MEI_ENABLE_IRQ \ + enable_irq + +#define MEI_WAIT(ms) \ + {\ + set_current_state(TASK_INTERRUPTIBLE);\ + schedule_timeout(ms);\ + } + +#define MEI_INIT_WAKELIST(name,queue) \ + init_waitqueue_head(&queue) + +#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\ + interruptible_sleep_on_timeout(&ev,timeout) + +#define MEI_WAIT_EVENT(ev)\ + interruptible_sleep_on(&ev) +#define MEI_WAKEUP_EVENT(ev)\ + wake_up_interruptible(&ev) + +typedef unsigned long MEI_intstat_t; +typedef struct semaphore MEI_mutex_t; +typedef struct file MEI_file_t; +typedef struct inode MEI_inode_t; + +extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr); |