diff options
Diffstat (limited to 'target/linux/generic')
15 files changed, 388 insertions, 127 deletions
diff --git a/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h new file mode 100644 index 0000000000..1ade657d5f --- /dev/null +++ b/target/linux/generic/files/include/linux/platform_data/brcmfmac-sdio.h @@ -0,0 +1,124 @@ +/* + * Copyright (c) 2013 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#ifndef _LINUX_BRCMFMAC_PLATFORM_H +#define _LINUX_BRCMFMAC_PLATFORM_H + +/* + * Platform specific driver functions and data. Through the platform specific + * device data functions can be provided to help the brcmfmac driver to + * operate with the device in combination with the used platform. + * + * Use the platform data in the following (similar) way: + * + * +#include <brcmfmac_platform.h> + + +static void brcmfmac_power_on(void) +{ +} + +static void brcmfmac_power_off(void) +{ +} + +static void brcmfmac_reset(void) +{ +} + +static struct brcmfmac_sdio_platform_data brcmfmac_sdio_pdata = { + .power_on = brcmfmac_power_on, + .power_off = brcmfmac_power_off, + .reset = brcmfmac_reset +}; + +static struct platform_device brcmfmac_device = { + .name = BRCMFMAC_SDIO_PDATA_NAME, + .id = PLATFORM_DEVID_NONE, + .dev.platform_data = &brcmfmac_sdio_pdata +}; + +void __init brcmfmac_init_pdata(void) +{ + brcmfmac_sdio_pdata.oob_irq_supported = true; + brcmfmac_sdio_pdata.oob_irq_nr = gpio_to_irq(GPIO_BRCMF_SDIO_OOB); + brcmfmac_sdio_pdata.oob_irq_flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHLEVEL; + platform_device_register(&brcmfmac_device); +} + * + * + * Note: the brcmfmac can be loaded as module or be statically built-in into + * the kernel. If built-in then do note that it uses module_init (and + * module_exit) routines which equal device_initcall. So if you intend to + * create a module with the platform specific data for the brcmfmac and have + * it built-in to the kernel then use a higher initcall then device_initcall + * (see init.h). If this is not done then brcmfmac will load without problems + * but will not pickup the platform data. + * + * When the driver does not "detect" platform driver data then it will continue + * without reporting anything and just assume there is no data needed. Which is + * probably true for most platforms. + * + * Explanation of the platform_data fields: + * + * drive_strength: is the preferred drive_strength to be used for the SDIO + * pins. If 0 then a default value will be used. This is the target drive + * strength, the exact drive strength which will be used depends on the + * capabilities of the device. + * + * oob_irq_supported: does the board have support for OOB interrupts. SDIO + * in-band interrupts are relatively slow and for having less overhead on + * interrupt processing an out of band interrupt can be used. If the HW + * supports this then enable this by setting this field to true and configure + * the oob related fields. + * + * oob_irq_nr, oob_irq_flags: the OOB interrupt information. The values are + * used for registering the irq using request_irq function. + * + * power_on: This function is called by the brcmfmac when the module gets + * loaded. This can be particularly useful for low power devices. The platform + * spcific routine may for example decide to power up the complete device. + * If there is no use-case for this function then provide NULL. + * + * power_off: This function is called by the brcmfmac when the module gets + * unloaded. At this point the device can be powered down or otherwise be reset. + * So if an actual power_off is not supported but reset is then reset the device + * when this function gets called. This can be particularly useful for low power + * devices. If there is no use-case for this function (either power-down or + * reset) then provide NULL. + * + * reset: This function can get called if the device communication broke down. + * This functionality is particularly useful in case of SDIO type devices. It is + * possible to reset a dongle via sdio data interface, but it requires that + * this is fully functional. This function is chip/module specific and this + * function should return only after the complete reset has completed. + */ + +#define BRCMFMAC_SDIO_PDATA_NAME "brcmfmac_sdio" + +struct brcmfmac_sdio_platform_data { + unsigned int drive_strength; + bool oob_irq_supported; + unsigned int oob_irq_nr; + unsigned long oob_irq_flags; + void (*power_on)(void); + void (*power_off)(void); + void (*reset)(void); +}; + +#endif /* _LINUX_BRCMFMAC_PLATFORM_H */ diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch index 6a4dbe7e13..4ca261484f 100644 --- a/target/linux/generic/patches-3.3/020-ssb_update.patch +++ b/target/linux/generic/patches-3.3/020-ssb_update.patch @@ -794,7 +794,7 @@ +} --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c -@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct +@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct { struct ssb_bus *bus = mcore->dev->bus; diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch index 6875a5eb8b..d3f9fb0f83 100644 --- a/target/linux/generic/patches-3.3/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch @@ -1574,7 +1574,7 @@ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); } } -@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips +@@ -171,9 +194,9 @@ u32 bcma_cpu_clock(struct bcma_drv_mips struct bcma_bus *bus = mcore->core->bus; if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) @@ -1932,7 +1932,7 @@ } /************************************************** -@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct +@@ -138,88 +143,108 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { @@ -2790,7 +2790,7 @@ { struct bcma_bus *bus = pci_get_drvdata(dev); -@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct +@@ -234,7 +238,7 @@ static void bcma_host_pci_remove(struct pci_set_drvdata(dev, NULL); } @@ -3231,12 +3231,12 @@ + break; + default: + return "UNKNOWN"; -+ } + } + + for (i = 0; i < size; i++) { + if (names[i].id == id->id) + return names[i].name; - } ++ } + return "UNKNOWN"; } @@ -3620,7 +3620,71 @@ + SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); + SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); + } -+ + +- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & +- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; +- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & +- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; +- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & +- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; +- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & +- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; +- +- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & +- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; +- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & +- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; +- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & +- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; +- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & +- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; +- +- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & +- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; +- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & +- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; +- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & +- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; +- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & +- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; +- +- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & +- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; +- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & +- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; +- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & +- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; +- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & +- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; +- +- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; +- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; +- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; +- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; +- +- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; +- +- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; +- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; +- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; +- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; +- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & +- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; +- +- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; +- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; +- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; +- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; +- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & +- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, + SSB_SROM8_FEM_TSSIPOS_SHIFT); + SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, @@ -3802,71 +3866,7 @@ + case BCMA_CHIP_ID_BCM4331: + present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; + break; - -- bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -- SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT; -- bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] & -- SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT; -- bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -- SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT; -- bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] & -- SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT; -- -- bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -- SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT; -- bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] & -- SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT; -- bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -- SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT; -- bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] & -- SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT; -- -- bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -- SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT; -- bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] & -- SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT; -- bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -- SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT; -- bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] & -- SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT; -- -- bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -- SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT; -- bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] & -- SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT; -- bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -- SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT; -- bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] & -- SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT; -- -- bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)]; -- bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)]; -- bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)]; -- bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)]; -- -- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; -- -- bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -- bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -- bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -- bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -- bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] & -- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; -- -- bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT; -- bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT; -- bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT; -- bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT; -- bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] & -- SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT; ++ + default: + return true; + } @@ -4045,7 +4045,12 @@ #define BCMA_CORE_INVALID 0x700 #define BCMA_CORE_CHIPCOMMON 0x800 #define BCMA_CORE_ILINE20 0x801 -@@ -125,6 +138,41 @@ struct bcma_host_ops { +@@ -121,10 +134,46 @@ struct bcma_host_ops { + #define BCMA_CORE_I2S 0x834 + #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ + #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ ++#define BCMA_CORE_ARM_CR4 0x83e + #define BCMA_CORE_DEFAULT 0xFFF #define BCMA_MAX_NR_CORES 16 @@ -4087,7 +4092,7 @@ struct bcma_device { struct bcma_bus *bus; struct bcma_device_id id; -@@ -136,8 +184,10 @@ struct bcma_device { +@@ -136,8 +185,10 @@ struct bcma_device { bool dev_registered; u8 core_index; @@ -4098,7 +4103,7 @@ u32 wrap; void __iomem *io_addr; -@@ -175,6 +225,12 @@ int __bcma_driver_register(struct bcma_d +@@ -175,6 +226,12 @@ int __bcma_driver_register(struct bcma_d extern void bcma_driver_unregister(struct bcma_driver *drv); @@ -4111,7 +4116,7 @@ struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -@@ -191,14 +247,18 @@ struct bcma_bus { +@@ -191,14 +248,18 @@ struct bcma_bus { struct bcma_chipinfo chipinfo; @@ -4131,7 +4136,7 @@ /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ -@@ -282,6 +342,7 @@ static inline void bcma_maskset16(struct +@@ -282,6 +343,7 @@ static inline void bcma_maskset16(struct bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } @@ -4139,7 +4144,7 @@ extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); -@@ -289,6 +350,7 @@ extern void bcma_core_set_clockmode(stru +@@ -289,6 +351,7 @@ extern void bcma_core_set_clockmode(stru enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); @@ -4324,7 +4329,17 @@ /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 -@@ -240,7 +353,60 @@ +@@ -203,6 +316,9 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ ++#define BCMA_CC_PMU_CTL_RES_SHIFT 13 ++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ + #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +@@ -240,7 +356,60 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ @@ -4386,7 +4401,7 @@ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 -@@ -256,6 +422,15 @@ +@@ -256,6 +425,15 @@ /* 4706 PMU */ #define BCMA_CC_PMU4706_MAINPLL_PLL0 0 @@ -4402,7 +4417,7 @@ /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 -@@ -284,6 +459,19 @@ +@@ -284,6 +462,19 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f @@ -4422,7 +4437,7 @@ /* BCM4331 ChipControl numbers. */ #define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ #define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ -@@ -297,9 +485,25 @@ +@@ -297,9 +488,25 @@ #define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ #define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ #define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ @@ -4448,7 +4463,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -310,11 +514,35 @@ struct bcma_chipcommon_pmu { +@@ -310,11 +517,35 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { @@ -4484,7 +4499,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -330,15 +558,30 @@ struct bcma_drv_cc { +@@ -330,15 +561,30 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; @@ -4515,7 +4530,7 @@ }; /* Register access */ -@@ -355,14 +598,16 @@ struct bcma_drv_cc { +@@ -355,14 +601,16 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); @@ -4534,7 +4549,7 @@ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); -@@ -375,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d +@@ -375,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); @@ -4547,7 +4562,7 @@ extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value); -@@ -387,5 +635,6 @@ extern void bcma_chipco_chipctl_maskset( +@@ -387,5 +638,6 @@ extern void bcma_chipco_chipctl_maskset( u32 offset, u32 mask, u32 set); extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask, u32 set); @@ -4862,7 +4877,15 @@ /* Is there any BCM4328 on BCMA bus? */ #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ -@@ -56,4 +58,36 @@ +@@ -35,6 +37,7 @@ + #define BCMA_IOST_BIST_DONE 0x8000 + #define BCMA_RESET_CTL 0x0800 + #define BCMA_RESET_CTL_RESET 0x0001 ++#define BCMA_RESET_ST 0x0804 + + /* BCMA PCI config space registers. */ + #define BCMA_PCI_PMCSR 0x44 +@@ -56,4 +59,36 @@ #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ diff --git a/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch b/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch index cbcd29ac39..3ee5e49829 100644 --- a/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch +++ b/target/linux/generic/patches-3.3/604-netfilter_conntrack_flush.patch @@ -1,6 +1,6 @@ --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c -@@ -267,10 +267,34 @@ static int ct_open(struct inode *inode, +@@ -267,10 +267,34 @@ static int ct_open(struct inode *inode, sizeof(struct ct_iter_state)); } diff --git a/target/linux/generic/patches-3.6/020-ssb_update.patch b/target/linux/generic/patches-3.6/020-ssb_update.patch index 2f4cdad449..6f9c8342d0 100644 --- a/target/linux/generic/patches-3.6/020-ssb_update.patch +++ b/target/linux/generic/patches-3.6/020-ssb_update.patch @@ -716,7 +716,7 @@ +} --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c -@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct +@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct { struct ssb_bus *bus = mcore->dev->bus; diff --git a/target/linux/generic/patches-3.6/025-bcma_backport.patch b/target/linux/generic/patches-3.6/025-bcma_backport.patch index 36f30de015..15f54a7162 100644 --- a/target/linux/generic/patches-3.6/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.6/025-bcma_backport.patch @@ -1075,7 +1075,7 @@ for (i = 0; i <= 6; i++) printk(" %s%s", irq_name[i], i == irq ? "*" : " "); printk("\n"); -@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips +@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips struct bcma_bus *bus = mcore->core->bus; if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) @@ -1261,7 +1261,7 @@ } pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0); return ret; -@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct +@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL); if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE) break; @@ -1649,7 +1649,15 @@ struct bcma_device; struct bcma_bus; -@@ -157,6 +157,7 @@ struct bcma_host_ops { +@@ -134,6 +134,7 @@ struct bcma_host_ops { + #define BCMA_CORE_I2S 0x834 + #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ + #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ ++#define BCMA_CORE_ARM_CR4 0x83e + #define BCMA_CORE_DEFAULT 0xFFF + + #define BCMA_MAX_NR_CORES 16 +@@ -157,6 +158,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 @@ -1657,7 +1665,7 @@ #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 -@@ -166,7 +167,11 @@ struct bcma_host_ops { +@@ -166,7 +168,11 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 @@ -1669,7 +1677,7 @@ struct bcma_device { struct bcma_bus *bus; -@@ -251,7 +256,7 @@ struct bcma_bus { +@@ -251,7 +257,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; @@ -1678,7 +1686,7 @@ struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; -@@ -345,6 +350,7 @@ extern void bcma_core_set_clockmode(stru +@@ -345,6 +351,7 @@ extern void bcma_core_set_clockmode(stru enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); @@ -1737,7 +1745,17 @@ /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 -@@ -325,6 +353,60 @@ +@@ -288,6 +316,9 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ ++#define BCMA_CC_PMU_CTL_RES_SHIFT 13 ++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ + #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +@@ -325,6 +356,60 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ @@ -1798,7 +1816,7 @@ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 -@@ -415,6 +497,13 @@ +@@ -415,6 +500,13 @@ /* 4313 Chip specific ChipControl register bits */ #define BCMA_CCTRL_4313_12MA_LED_DRIVE 0x00000007 /* 12 mA drive strengh for later 4313 */ @@ -1812,7 +1830,7 @@ /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ -@@ -425,11 +514,35 @@ struct bcma_chipcommon_pmu { +@@ -425,11 +517,35 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { @@ -1848,7 +1866,7 @@ struct bcma_serial_port { void *regs; unsigned long clockspeed; -@@ -445,15 +558,30 @@ struct bcma_drv_cc { +@@ -445,15 +561,30 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; @@ -1879,7 +1897,7 @@ }; /* Register access */ -@@ -470,14 +598,16 @@ struct bcma_drv_cc { +@@ -470,14 +601,16 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); @@ -1898,7 +1916,7 @@ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); -@@ -490,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d +@@ -490,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); @@ -1946,7 +1964,15 @@ /* Is there any BCM4328 on BCMA bus? */ #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ -@@ -83,4 +85,9 @@ +@@ -35,6 +37,7 @@ + #define BCMA_IOST_BIST_DONE 0x8000 + #define BCMA_RESET_CTL 0x0800 + #define BCMA_RESET_CTL_RESET 0x0001 ++#define BCMA_RESET_ST 0x0804 + + /* BCMA PCI config space registers. */ + #define BCMA_PCI_PMCSR 0x44 +@@ -83,4 +86,9 @@ * (2 ZettaBytes), high 32 bits */ diff --git a/target/linux/generic/patches-3.6/474-mtd_mp25p80_add_pm25lq032.patch b/target/linux/generic/patches-3.6/474-mtd_mp25p80_add_pm25lq032.patch index e122cc9a92..5f81cd430a 100644 --- a/target/linux/generic/patches-3.6/474-mtd_mp25p80_add_pm25lq032.patch +++ b/target/linux/generic/patches-3.6/474-mtd_mp25p80_add_pm25lq032.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -682,6 +682,7 @@ +@@ -668,6 +668,7 @@ static const struct spi_device_id m25p_i /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, diff --git a/target/linux/generic/patches-3.6/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch b/target/linux/generic/patches-3.6/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch index 6aacaaca93..ac837ff258 100644 --- a/target/linux/generic/patches-3.6/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch +++ b/target/linux/generic/patches-3.6/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch @@ -30,7 +30,7 @@ /****************************************************************************/ struct m25p { -@@ -903,7 +909,7 @@ static int __devinit m25p_probe(struct s +@@ -904,7 +910,7 @@ static int __devinit m25p_probe(struct s flash->mtd._write = m25p80_write; /* prefer "small sector" erase if possible */ diff --git a/target/linux/generic/patches-3.6/950-vm_exports.patch b/target/linux/generic/patches-3.6/950-vm_exports.patch index ba363c11bd..a49a2f7791 100644 --- a/target/linux/generic/patches-3.6/950-vm_exports.patch +++ b/target/linux/generic/patches-3.6/950-vm_exports.patch @@ -1,6 +1,6 @@ --- a/mm/shmem.c +++ b/mm/shmem.c -@@ -2914,6 +2914,16 @@ EXPORT_SYMBOL_GPL(shmem_truncate_range); +@@ -2920,6 +2920,16 @@ EXPORT_SYMBOL_GPL(shmem_truncate_range); /* common code */ @@ -17,7 +17,7 @@ /** * shmem_file_setup - get an unlinked file living in tmpfs * @name: name for dentry (to be seen in /proc/<pid>/maps -@@ -2991,11 +3001,8 @@ int shmem_zero_setup(struct vm_area_stru +@@ -2997,11 +3007,8 @@ int shmem_zero_setup(struct vm_area_stru if (IS_ERR(file)) return PTR_ERR(file); diff --git a/target/linux/generic/patches-3.7/020-ssb_update.patch b/target/linux/generic/patches-3.7/020-ssb_update.patch index 73c3830602..d44c8129c6 100644 --- a/target/linux/generic/patches-3.7/020-ssb_update.patch +++ b/target/linux/generic/patches-3.7/020-ssb_update.patch @@ -716,7 +716,7 @@ +} --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c -@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct +@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct { struct ssb_bus *bus = mcore->dev->bus; diff --git a/target/linux/generic/patches-3.7/025-bcma_backport.patch b/target/linux/generic/patches-3.7/025-bcma_backport.patch index 94be7ae8e5..3cba3ca859 100644 --- a/target/linux/generic/patches-3.7/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.7/025-bcma_backport.patch @@ -366,7 +366,7 @@ bcma_cc_write32(cc, BCMA_CC_CORECTL, --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c -@@ -32,6 +32,9 @@ int bcma_nflash_init(struct bcma_drv_cc +@@ -32,6 +32,9 @@ int bcma_nflash_init(struct bcma_drv_cc } cc->nflash.present = true; @@ -393,7 +393,7 @@ void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value) { -@@ -144,7 +145,7 @@ static void bcma_pmu_workarounds(struct +@@ -144,7 +145,7 @@ static void bcma_pmu_workarounds(struct } } @@ -662,7 +662,7 @@ { 0 }, }; -@@ -84,6 +111,8 @@ int bcma_sflash_init(struct bcma_drv_cc +@@ -84,6 +111,8 @@ int bcma_sflash_init(struct bcma_drv_cc break; } break; @@ -671,7 +671,7 @@ default: for (e = bcma_sflash_st_tbl; e->name; e++) { if (e->id == id) -@@ -116,7 +145,7 @@ int bcma_sflash_init(struct bcma_drv_cc +@@ -116,7 +145,7 @@ int bcma_sflash_init(struct bcma_drv_cc return -ENOTSUPP; } @@ -885,7 +885,7 @@ for (i = 0; i <= 6; i++) printk(" %s%s", irq_name[i], i == irq ? "*" : " "); printk("\n"); -@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips +@@ -171,7 +194,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips struct bcma_bus *bus = mcore->core->bus; if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) @@ -1288,7 +1288,15 @@ --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -157,6 +157,7 @@ struct bcma_host_ops { +@@ -134,6 +134,7 @@ struct bcma_host_ops { + #define BCMA_CORE_I2S 0x834 + #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ + #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ ++#define BCMA_CORE_ARM_CR4 0x83e + #define BCMA_CORE_DEFAULT 0xFFF + + #define BCMA_MAX_NR_CORES 16 +@@ -157,6 +158,7 @@ struct bcma_host_ops { /* Chip IDs of SoCs */ #define BCMA_CHIP_ID_BCM4706 0x5300 @@ -1296,7 +1304,7 @@ #define BCMA_CHIP_ID_BCM4716 0x4716 #define BCMA_PKG_ID_BCM4716 8 #define BCMA_PKG_ID_BCM4717 9 -@@ -166,7 +167,11 @@ struct bcma_host_ops { +@@ -166,7 +168,11 @@ struct bcma_host_ops { #define BCMA_CHIP_ID_BCM4749 0x4749 #define BCMA_CHIP_ID_BCM5356 0x5356 #define BCMA_CHIP_ID_BCM5357 0x5357 @@ -1308,7 +1316,7 @@ struct bcma_device { struct bcma_bus *bus; -@@ -251,7 +256,7 @@ struct bcma_bus { +@@ -251,7 +257,7 @@ struct bcma_bus { u8 num; struct bcma_drv_cc drv_cc; @@ -1317,7 +1325,7 @@ struct bcma_drv_mips drv_mips; struct bcma_drv_gmac_cmn drv_gmac_cmn; -@@ -345,6 +350,7 @@ extern void bcma_core_set_clockmode(stru +@@ -345,6 +351,7 @@ extern void bcma_core_set_clockmode(stru enum bcma_clkmode clkmode); extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on); @@ -1345,7 +1353,17 @@ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 -@@ -510,6 +514,7 @@ struct bcma_chipcommon_pmu { +@@ -312,6 +316,9 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ ++#define BCMA_CC_PMU_CTL_RES_SHIFT 13 ++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ + #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +@@ -510,6 +517,7 @@ struct bcma_chipcommon_pmu { #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash { @@ -1353,7 +1371,7 @@ u8 buswidth; u32 window; u32 window_size; -@@ -532,6 +537,7 @@ struct mtd_info; +@@ -532,6 +540,7 @@ struct mtd_info; struct bcma_nflash { bool present; @@ -1361,7 +1379,7 @@ struct mtd_info *mtd; }; -@@ -552,6 +558,7 @@ struct bcma_drv_cc { +@@ -552,6 +561,7 @@ struct bcma_drv_cc { u32 capabilities; u32 capabilities_ext; u8 setup_done:1; @@ -1369,7 +1387,7 @@ /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; -@@ -567,6 +574,14 @@ struct bcma_drv_cc { +@@ -567,6 +577,14 @@ struct bcma_drv_cc { int nr_serial_ports; struct bcma_serial_port serial_ports[4]; #endif /* CONFIG_BCMA_DRIVER_MIPS */ @@ -1384,7 +1402,7 @@ }; /* Register access */ -@@ -583,14 +598,16 @@ struct bcma_drv_cc { +@@ -583,14 +601,16 @@ struct bcma_drv_cc { bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); @@ -1403,7 +1421,7 @@ void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); -@@ -603,9 +620,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d +@@ -603,9 +623,12 @@ u32 bcma_chipco_gpio_outen(struct bcma_d u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); @@ -1437,7 +1455,15 @@ extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h -@@ -85,6 +85,9 @@ +@@ -37,6 +37,7 @@ + #define BCMA_IOST_BIST_DONE 0x8000 + #define BCMA_RESET_CTL 0x0800 + #define BCMA_RESET_CTL_RESET 0x0001 ++#define BCMA_RESET_ST 0x0804 + + /* BCMA PCI config space registers. */ + #define BCMA_PCI_PMCSR 0x44 +@@ -85,6 +86,9 @@ * (2 ZettaBytes), high 32 bits */ diff --git a/target/linux/generic/patches-3.7/474-mtd_mp25p80_add_pm25lq032.patch b/target/linux/generic/patches-3.7/474-mtd_mp25p80_add_pm25lq032.patch index e122cc9a92..e4b29ccecb 100644 --- a/target/linux/generic/patches-3.7/474-mtd_mp25p80_add_pm25lq032.patch +++ b/target/linux/generic/patches-3.7/474-mtd_mp25p80_add_pm25lq032.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c -@@ -682,6 +682,7 @@ +@@ -676,6 +676,7 @@ static const struct spi_device_id m25p_i /* PMC -- pm25x "blocks" are 32K, sectors are 4K */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, { "pm25lv010", INFO(0, 0, 32 * 1024, 4, SECT_4K_PMC) }, diff --git a/target/linux/generic/patches-3.7/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch b/target/linux/generic/patches-3.7/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch index 58d8d0636d..d720b69328 100644 --- a/target/linux/generic/patches-3.7/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch +++ b/target/linux/generic/patches-3.7/476-mtd-m25p80-allow-to-disable-small-sector-erase.patch @@ -30,7 +30,7 @@ /****************************************************************************/ struct m25p { -@@ -915,7 +921,7 @@ static int __devinit m25p_probe(struct s +@@ -916,7 +922,7 @@ static int __devinit m25p_probe(struct s flash->mtd._write = m25p80_write; /* prefer "small sector" erase if possible */ diff --git a/target/linux/generic/patches-3.8/025-bcma_backport.patch b/target/linux/generic/patches-3.8/025-bcma_backport.patch index 1cabd42ec6..c80275b951 100644 --- a/target/linux/generic/patches-3.8/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.8/025-bcma_backport.patch @@ -649,7 +649,17 @@ #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 -@@ -606,6 +607,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct +@@ -315,6 +316,9 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ ++#define BCMA_CC_PMU_CTL_RES_SHIFT 13 ++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ + #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +@@ -606,6 +610,8 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); @@ -793,3 +803,23 @@ break; default: bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -134,6 +134,7 @@ struct bcma_host_ops { + #define BCMA_CORE_I2S 0x834 + #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ + #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ ++#define BCMA_CORE_ARM_CR4 0x83e + #define BCMA_CORE_DEFAULT 0xFFF + + #define BCMA_MAX_NR_CORES 16 +--- a/include/linux/bcma/bcma_regs.h ++++ b/include/linux/bcma/bcma_regs.h +@@ -37,6 +37,7 @@ + #define BCMA_IOST_BIST_DONE 0x8000 + #define BCMA_RESET_CTL 0x0800 + #define BCMA_RESET_CTL_RESET 0x0001 ++#define BCMA_RESET_ST 0x0804 + + /* BCMA PCI config space registers. */ + #define BCMA_PCI_PMCSR 0x44 diff --git a/target/linux/generic/patches-3.9/025-bcma_backport.patch b/target/linux/generic/patches-3.9/025-bcma_backport.patch new file mode 100644 index 0000000000..489dc20188 --- /dev/null +++ b/target/linux/generic/patches-3.9/025-bcma_backport.patch @@ -0,0 +1,32 @@ +--- a/include/linux/bcma/bcma.h ++++ b/include/linux/bcma/bcma.h +@@ -134,6 +134,7 @@ struct bcma_host_ops { + #define BCMA_CORE_I2S 0x834 + #define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ + #define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ ++#define BCMA_CORE_ARM_CR4 0x83e + #define BCMA_CORE_DEFAULT 0xFFF + + #define BCMA_MAX_NR_CORES 16 +--- a/include/linux/bcma/bcma_regs.h ++++ b/include/linux/bcma/bcma_regs.h +@@ -37,6 +37,7 @@ + #define BCMA_IOST_BIST_DONE 0x8000 + #define BCMA_RESET_CTL 0x0800 + #define BCMA_RESET_CTL_RESET 0x0001 ++#define BCMA_RESET_ST 0x0804 + + /* BCMA PCI config space registers. */ + #define BCMA_PCI_PMCSR 0x44 +--- a/include/linux/bcma/bcma_driver_chipcommon.h ++++ b/include/linux/bcma/bcma_driver_chipcommon.h +@@ -316,6 +316,9 @@ + #define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ + #define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 ++#define BCMA_CC_PMU_CTL_RES 0x00006000 /* reset control mask */ ++#define BCMA_CC_PMU_CTL_RES_SHIFT 13 ++#define BCMA_CC_PMU_CTL_RES_RELOAD 0x2 /* reload POR values */ + #define BCMA_CC_PMU_CTL_PLL_UPD 0x00000400 + #define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ |