1 files changed, 0 insertions, 67 deletions
diff --git a/target/linux/generic/pending-5.15/722-net-mt7531-only-do-PLL-once-after-the-reset.patch b/target/linux/generic/pending-5.15/722-net-mt7531-only-do-PLL-once-after-the-reset.patch
deleted file mode 100644
index 6fd450d7f9..0000000000
--- a/target/linux/generic/pending-5.15/722-net-mt7531-only-do-PLL-once-after-the-reset.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 9fec662b54fc956b776df15c704e996c61292850 Mon Sep 17 00:00:00 2001
-From: Alexander Couzens <lynxis@fe80.eu>
-Date: Sat, 13 Aug 2022 13:05:09 +0200
-Subject: [PATCH 02/10] net: mt7531: only do PLL once after the reset
-
-Move the PLL init of the switch out of the pad configuration of the port
-6 (usally cpu port).
-
-Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
-outbound traffic on port 5 or port 6.
-
-Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
----
- drivers/net/dsa/mt7530.c | 15 +++++++++------
- 1 file changed, 9 insertions(+), 6 deletions(-)
-
---- a/drivers/net/dsa/mt7530.c
-+++ b/drivers/net/dsa/mt7530.c
-@@ -506,14 +506,19 @@ static bool mt7531_dual_sgmii_supported(
- static int
- mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
- {
--	struct mt7530_priv *priv = ds->priv;
-+	return 0;
-+}
-+
-+static void
-+mt7531_pll_setup(struct mt7530_priv *priv)
-+{
- 	u32 top_sig;
- 	u32 hwstrap;
- 	u32 xtal;
- 	u32 val;
- 
- 	if (mt7531_dual_sgmii_supported(priv))
--		return 0;
-+		return;
- 
- 	val = mt7530_read(priv, MT7531_CREV);
- 	top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
-@@ -592,8 +597,6 @@ mt7531_pad_setup(struct dsa_switch *ds,
- 	val |= EN_COREPLL;
- 	mt7530_write(priv, MT7531_PLLGP_EN, val);
- 	usleep_range(25, 35);
--
--	return 0;
- }
- 
- static void
-@@ -2326,6 +2329,8 @@ mt7531_setup(struct dsa_switch *ds)
- 		     SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
- 		     SYS_CTRL_REG_RST);
- 
-+	mt7531_pll_setup(priv);
-+
- 	if (mt7531_dual_sgmii_supported(priv)) {
- 		priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
- 
-@@ -2882,8 +2887,6 @@ mt7531_cpu_port_config(struct dsa_switch
- 	case 6:
- 		interface = PHY_INTERFACE_MODE_2500BASEX;
- 
--		mt7531_pad_setup(ds, interface);
--
- 		priv->p6_interface = interface;
- 		break;
- 	default: