diff options
Diffstat (limited to 'target/linux/generic/pending-5.10/736-net-phy-at803x-add-at8031-features.patch')
| -rw-r--r-- | target/linux/generic/pending-5.10/736-net-phy-at803x-add-at8031-features.patch | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/target/linux/generic/pending-5.10/736-net-phy-at803x-add-at8031-features.patch b/target/linux/generic/pending-5.10/736-net-phy-at803x-add-at8031-features.patch deleted file mode 100644 index 77d3946aae..0000000000 --- a/target/linux/generic/pending-5.10/736-net-phy-at803x-add-at8031-features.patch +++ /dev/null @@ -1,36 +0,0 @@ -Add back explicit PHY feature flags for the AR8031 and -AR8033 PHY instead of reading them from the PHY. - -The Botloader for Ubiquiti UniFi AC boards (and possibly more) -leave fiber page selected, thus we will end up reading the PHY -capabilities of the SGMII side (which does not offer 10 Mbit/s). - -We already have a hack in place, which switches back to the copper -page, however this happens after capabilities are read. - -The original conversation about 735-net-phy-at803x-fix-at8033-sgmii-mode -back in 2015 explicitly mention the UniFi AC Lite. The issue however is -not missing autonegotiation on the Fiber side, but the fact the PHY -is never switched to the copper side. So half of this patch is superfluous. - -A fix is currently being upstreamed. Once this is mainlined and available to us, -these patches can be dropped: - -735-net-phy-at803x-fix-at8033-sgmii-mode.patch -736-net-phy-at803x-add-at8031-features.patch - -This was tested on a UniFi AC Lite. - -See https://patchwork.kernel.org/project/netdevbpf/list/?series=467341 - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -1119,7 +1119,7 @@ static struct phy_driver at803x_driver[] - .get_wol = at803x_get_wol, - .suspend = at803x_suspend, - .resume = at803x_resume, -- /* PHY_GBIT_FEATURES */ -+ .features = PHY_GBIT_FEATURES, - .read_status = at803x_read_status, - .aneg_done = at803x_aneg_done, - .ack_interrupt = &at803x_ack_interrupt, |