aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch')
-rw-r--r--target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch327
1 files changed, 0 insertions, 327 deletions
diff --git a/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch
deleted file mode 100644
index f2966fafbb..0000000000
--- a/target/linux/generic/pending-4.9/190-e100e-avoid-receiver-interrupt-bursts.patch
+++ /dev/null
@@ -1,327 +0,0 @@
-Subject: [1/5] e1000e: Fix error path in link detection
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792259
-Message-Id: <20170721183627.13373-1-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:23 -0700
-
-In case of error from e1e_rphy(), the loop will exit early and "success"
-will be set to true erroneously.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++---
- 1 file changed, 4 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/phy.c b/drivers/net/ethernet/intel/e1000e/phy.c
-index d78d47b41a71..86ff0969efb6 100644
---- a/drivers/net/ethernet/intel/e1000e/phy.c
-+++ b/drivers/net/ethernet/intel/e1000e/phy.c
-@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- s32 ret_val = 0;
- u16 i, phy_status;
-
-+ *success = false;
- for (i = 0; i < iterations; i++) {
- /* Some PHYs require the MII_BMSR register to be read
- * twice due to the link bit being sticky. No harm doing
-@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
- if (ret_val)
- break;
-- if (phy_status & BMSR_LSTATUS)
-+ if (phy_status & BMSR_LSTATUS) {
-+ *success = true;
- break;
-+ }
- if (usec_interval >= 1000)
- msleep(usec_interval / 1000);
- else
- udelay(usec_interval);
- }
-
-- *success = (i < iterations);
--
- return ret_val;
- }
-
-
-Subject: [2/5] e1000e: Fix wrong comment related to link detection
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792257
-Message-Id: <20170721183627.13373-2-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:24 -0700
-
-Reading e1000e_check_for_copper_link() shows that get_link_status is set to
-false after link has been detected. Therefore, it stays TRUE until then.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index 2dcb5463d9b8..58a87134d2e5 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5074,7 +5074,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
-
- /* get_link_status is set on LSC (link status) interrupt or
- * Rx sequence error interrupt. get_link_status will stay
-- * false until the check_for_link establishes link
-+ * true until the check_for_link establishes link
- * for copper adapters ONLY
- */
- switch (hw->phy.media_type) {
-@@ -5092,7 +5092,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- break;
- case e1000_media_type_internal_serdes:
- ret_val = hw->mac.ops.check_for_link(hw);
-- link_active = adapter->hw.mac.serdes_has_link;
-+ link_active = hw->mac.serdes_has_link;
- break;
- default:
- case e1000_media_type_unknown:
-
-Content-Transfer-Encoding: 7bit
-Subject: [3/5] e1000e: Fix return value test
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792258
-Message-Id: <20170721183627.13373-3-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:25 -0700
-
-All the helpers return -E1000_ERR_PHY.
-
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index 58a87134d2e5..fc6a1d9999b2 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5099,7 +5099,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- break;
- }
-
-- if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
-+ if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
- (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
- /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- e_info("Gigabit has been disabled, downgrading speed\n");
-
-Content-Transfer-Encoding: 7bit
-Subject: [4/5] e1000e: Separate signaling for link check/link up
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792262
-Message-Id: <20170721183627.13373-4-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:26 -0700
-
-Lennart reported the following race condition:
-
-\ e1000_watchdog_task
- \ e1000e_has_link
- \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link
- /* link is up */
- mac->get_link_status = false;
-
- /* interrupt */
- \ e1000_msix_other
- hw->mac.get_link_status = true;
-
- link_active = !hw->mac.get_link_status
- /* link_active is false, wrongly */
-
-This problem arises because the single flag get_link_status is used to
-signal two different states: link status needs checking and link status is
-down.
-
-Avoid the problem by using the return value of .check_for_link to signal
-the link status to e1000e_has_link().
-
-Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/mac.c | 11 ++++++++---
- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +-
- 2 files changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c
-index b322011ec282..f457c5703d0c 100644
---- a/drivers/net/ethernet/intel/e1000e/mac.c
-+++ b/drivers/net/ethernet/intel/e1000e/mac.c
-@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
- * Checks to see of the link status of the hardware has changed. If a
- * change in link status has been detected, then we read the PHY registers
- * to get the current speed/duplex if link exists.
-+ *
-+ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
-+ * up).
- **/
- s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
- {
-@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
- * Change or Rx Sequence Error interrupt.
- */
- if (!mac->get_link_status)
-- return 0;
-+ return 1;
-
- /* First we want to see if the MII Status Register reports
- * link. If so, then we want to get the current speed/duplex
-@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
- * different link partner.
- */
- ret_val = e1000e_config_fc_after_link_up(hw);
-- if (ret_val)
-+ if (ret_val) {
- e_dbg("Error configuring flow control\n");
-+ return ret_val;
-+ }
-
-- return ret_val;
-+ return 1;
- }
-
- /**
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index fc6a1d9999b2..5a8ab1136566 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -5081,7 +5081,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
- case e1000_media_type_copper:
- if (hw->mac.get_link_status) {
- ret_val = hw->mac.ops.check_for_link(hw);
-- link_active = !hw->mac.get_link_status;
-+ link_active = ret_val > 0;
- } else {
- link_active = true;
- }
-
-Content-Transfer-Encoding: 7bit
-Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts
-From: Benjamin Poirier <bpoirier@suse.com>
-X-Patchwork-Id: 792260
-Message-Id: <20170721183627.13373-5-bpoirier@suse.com>
-To: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-Cc: netdev@vger.kernel.org, intel-wired-lan@lists.osuosl.org,
- linux-kernel@vger.kernel.org,
- Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Date: Fri, 21 Jul 2017 11:36:27 -0700
-
-When e1000e_poll() is not fast enough to keep up with incoming traffic, the
-adapter (when operating in msix mode) raises the Other interrupt to signal
-Receiver Overrun.
-
-This is a double problem because 1) at the moment e1000_msix_other()
-assumes that it is only called in case of Link Status Change and 2) if the
-condition persists, the interrupt is repeatedly raised again in quick
-succession.
-
-Ideally we would configure the Other interrupt to not be raised in case of
-receiver overrun but this doesn't seem possible on this adapter. Instead,
-we handle the first part of the problem by reverting to the practice of
-reading ICR in the other interrupt handler, like before commit 16ecba59bc33
-("e1000e: Do not read ICR in Other interrupt"). Thanks to commit
-0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME
-from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts
-anymore. We handle the second part of the problem by not re-enabling the
-Other interrupt right away when there is overrun. Instead, we wait until
-traffic subsides, napi polling mode is exited and interrupts are
-re-enabled.
-
-Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
-Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt")
-Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
----
- drivers/net/ethernet/intel/e1000e/defines.h | 1 +
- drivers/net/ethernet/intel/e1000e/netdev.c | 33 +++++++++++++++++++++++------
- 2 files changed, 27 insertions(+), 7 deletions(-)
-
-diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
-index 0641c0098738..afb7ebe20b24 100644
---- a/drivers/net/ethernet/intel/e1000e/defines.h
-+++ b/drivers/net/ethernet/intel/e1000e/defines.h
-@@ -398,6 +398,7 @@
- #define E1000_ICR_LSC 0x00000004 /* Link Status Change */
- #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
- #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
-+#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */
- #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
- #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */
- /* If this bit asserted, the driver should claim the interrupt */
-diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
-index 5a8ab1136566..803edd1a6401 100644
---- a/drivers/net/ethernet/intel/e1000e/netdev.c
-+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
-@@ -1910,12 +1910,30 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-+ u32 icr;
-+ bool enable = true;
-+
-+ icr = er32(ICR);
-+ if (icr & E1000_ICR_RXO) {
-+ ew32(ICR, E1000_ICR_RXO);
-+ enable = false;
-+ /* napi poll will re-enable Other, make sure it runs */
-+ if (napi_schedule_prep(&adapter->napi)) {
-+ adapter->total_rx_bytes = 0;
-+ adapter->total_rx_packets = 0;
-+ __napi_schedule(&adapter->napi);
-+ }
-+ }
-+ if (icr & E1000_ICR_LSC) {
-+ ew32(ICR, E1000_ICR_LSC);
-+ hw->mac.get_link_status = true;
-+ /* guard against interrupt when we're going down */
-+ if (!test_bit(__E1000_DOWN, &adapter->state)) {
-+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+ }
-+ }
-
-- hw->mac.get_link_status = true;
--
-- /* guard against interrupt when we're going down */
-- if (!test_bit(__E1000_DOWN, &adapter->state)) {
-- mod_timer(&adapter->watchdog_timer, jiffies + 1);
-+ if (enable && !test_bit(__E1000_DOWN, &adapter->state)) {
- ew32(IMS, E1000_IMS_OTHER);
- }
-
-@@ -2687,7 +2705,8 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
- napi_complete_done(napi, work_done);
- if (!test_bit(__E1000_DOWN, &adapter->state)) {
- if (adapter->msix_entries)
-- ew32(IMS, adapter->rx_ring->ims_val);
-+ ew32(IMS, adapter->rx_ring->ims_val |
-+ E1000_IMS_OTHER);
- else
- e1000_irq_enable(adapter);
- }
-@@ -4204,7 +4223,7 @@ static void e1000e_trigger_lsc(struct e1000_adapter *adapter)
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->msix_entries)
-- ew32(ICS, E1000_ICS_OTHER);
-+ ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
- else
- ew32(ICS, E1000_ICS_LSC);
- }