aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/pending-4.19/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic/pending-4.19/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch')
-rw-r--r--target/linux/generic/pending-4.19/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch108
1 files changed, 0 insertions, 108 deletions
diff --git a/target/linux/generic/pending-4.19/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch b/target/linux/generic/pending-4.19/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
deleted file mode 100644
index b540e1dbc1..0000000000
--- a/target/linux/generic/pending-4.19/739-net-avoid-tx-fault-with-Nokia-GPON-module.patch
+++ /dev/null
@@ -1,108 +0,0 @@
-From 283b211aa01bdae94dffb3121655dbb20bf237f4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 15:22:05 +0000
-Subject: net: sfp: avoid tx-fault with Nokia GPON module
-
-The Nokia GPON module can hold tx-fault active while it is initialising
-which can take up to 60s. Avoid this causing the module to be declared
-faulty after the SFP MSA defined non-cooled module timeout.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 ++++++++++++++++++++++++++++++------------
- 1 file changed, 30 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -153,10 +153,20 @@ static const enum gpiod_flags gpio_flags
- GPIOD_ASIS,
- };
-
--#define T_WAIT msecs_to_jiffies(50)
--#define T_INIT_JIFFIES msecs_to_jiffies(300)
--#define T_RESET_US 10
--#define T_FAULT_RECOVER msecs_to_jiffies(1000)
-+/* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a
-+ * non-cooled module to initialise its laser safety circuitry. We wait
-+ * an initial T_WAIT period before we check the tx fault to give any PHY
-+ * on board (for a copper SFP) time to initialise.
-+ */
-+#define T_WAIT msecs_to_jiffies(50)
-+#define T_START_UP msecs_to_jiffies(300)
-+#define T_START_UP_BAD_GPON msecs_to_jiffies(60000)
-+
-+/* t_reset is the time required to assert the TX_DISABLE signal to reset
-+ * an indicated TX_FAULT.
-+ */
-+#define T_RESET_US 10
-+#define T_FAULT_RECOVER msecs_to_jiffies(1000)
-
- /* SFP module presence detection is poor: the three MOD DEF signals are
- * the same length on the PCB, which means it's possible for MOD DEF 0 to
-@@ -216,6 +226,7 @@ struct sfp {
-
- struct sfp_eeprom_id id;
- unsigned int module_power_mW;
-+ unsigned int module_t_start_up;
-
- #if IS_ENABLED(CONFIG_HWMON)
- struct sfp_diag diag;
-@@ -1590,6 +1601,12 @@ static int sfp_sm_mod_probe(struct sfp *
- if (ret < 0)
- return ret;
-
-+ if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) &&
-+ !memcmp(id.base.vendor_pn, "3FE46541AA ", 16))
-+ sfp->module_t_start_up = T_START_UP_BAD_GPON;
-+ else
-+ sfp->module_t_start_up = T_START_UP;
-+
- return 0;
- }
-
-@@ -1795,11 +1812,12 @@ static void sfp_sm_main(struct sfp *sfp,
- break;
-
- if (sfp->state & SFP_F_TX_FAULT) {
-- /* Wait t_init before indicating that the link is up,
-- * provided the current state indicates no TX_FAULT. If
-- * TX_FAULT clears before this time, that's fine too.
-+ /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431)
-+ * from the TX_DISABLE deassertion for the module to
-+ * initialise, which is indicated by TX_FAULT
-+ * deasserting.
- */
-- timeout = T_INIT_JIFFIES;
-+ timeout = sfp->module_t_start_up;
- if (timeout > T_WAIT)
- timeout -= T_WAIT;
- else
-@@ -1816,8 +1834,8 @@ static void sfp_sm_main(struct sfp *sfp,
-
- case SFP_S_INIT:
- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-- /* TX_FAULT is still asserted after t_init, so assume
-- * there is a fault.
-+ /* TX_FAULT is still asserted after t_init or
-+ * or t_start_up, so assume there is a fault.
- */
- sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
- sfp->sm_retries == 5);
-@@ -1836,7 +1854,7 @@ static void sfp_sm_main(struct sfp *sfp,
- case SFP_S_INIT_TX_FAULT:
- if (event == SFP_E_TIMEOUT) {
- sfp_module_tx_fault_reset(sfp);
-- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up);
- }
- break;
-
-@@ -1860,7 +1878,7 @@ static void sfp_sm_main(struct sfp *sfp,
- case SFP_S_TX_FAULT:
- if (event == SFP_E_TIMEOUT) {
- sfp_module_tx_fault_reset(sfp);
-- sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
-+ sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up);
- }
- break;
-