diff options
Diffstat (limited to 'target/linux/generic/patches-3.6/020-ssb_update.patch')
| -rw-r--r-- | target/linux/generic/patches-3.6/020-ssb_update.patch | 130 |
1 files changed, 125 insertions, 5 deletions
diff --git a/target/linux/generic/patches-3.6/020-ssb_update.patch b/target/linux/generic/patches-3.6/020-ssb_update.patch index 4113c17097..2f4cdad449 100644 --- a/target/linux/generic/patches-3.6/020-ssb_update.patch +++ b/target/linux/generic/patches-3.6/020-ssb_update.patch @@ -384,6 +384,39 @@ u32 ssb_pmu_get_cpu_clock(struct ssb_chipcommon *cc) { struct ssb_bus *bus = cc->dev->bus; +@@ -645,3 +675,32 @@ u32 ssb_pmu_get_controlclock(struct ssb_ + return 0; + } + } ++ ++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid) ++{ ++ u32 pmu_ctl = 0; ++ ++ switch (cc->dev->bus->chip_id) { ++ case 0x4322: ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, 0x11100070); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL1, 0x1014140a); ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, 0x88888854); ++ if (spuravoid == 1) ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05201828); ++ else ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, 0x05001828); ++ pmu_ctl = SSB_CHIPCO_PMU_CTL_PLL_UPD; ++ break; ++ case 43222: ++ /* TODO: BCM43222 requires updating PLLs too */ ++ return; ++ default: ++ ssb_printk(KERN_ERR PFX ++ "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n", ++ cc->dev->bus->chip_id); ++ return; ++ } ++ ++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, pmu_ctl); ++} ++EXPORT_SYMBOL_GPL(ssb_pmu_spuravoid_pllupdate); --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c @@ -0,0 +1,18 @@ @@ -683,7 +716,7 @@ +} --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c -@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct +@@ -178,9 +178,9 @@ static void ssb_mips_serial_init(struct { struct ssb_bus *bus = mcore->dev->bus; @@ -974,7 +1007,15 @@ struct list_head list; --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -504,7 +504,9 @@ +@@ -219,6 +219,7 @@ + #define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */ + #define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ + #define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16 ++#define SSB_CHIPCO_PMU_CTL_PLL_UPD 0x00000400 + #define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ + #define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ + #define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +@@ -504,7 +505,9 @@ #define SSB_CHIPCO_FLASHCTL_ST_SE 0x02D8 /* Sector Erase */ #define SSB_CHIPCO_FLASHCTL_ST_BE 0x00C7 /* Bulk Erase */ #define SSB_CHIPCO_FLASHCTL_ST_DP 0x00B9 /* Deep Power-down */ @@ -985,7 +1026,7 @@ /* Status register bits for ST flashes */ #define SSB_CHIPCO_FLASHSTA_ST_WIP 0x01 /* Write In Progress */ -@@ -588,7 +590,10 @@ struct ssb_chipcommon { +@@ -588,7 +591,10 @@ struct ssb_chipcommon { u32 status; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; @@ -996,7 +1037,7 @@ }; static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) -@@ -628,8 +633,7 @@ enum ssb_clkmode { +@@ -628,8 +634,7 @@ enum ssb_clkmode { extern void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, enum ssb_clkmode mode); @@ -1006,7 +1047,7 @@ void ssb_chipco_irq_mask(struct ssb_chipcommon *cc, u32 mask, u32 value); -@@ -642,6 +646,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi +@@ -642,6 +647,8 @@ u32 ssb_chipco_gpio_outen(struct ssb_chi u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value); u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value); @@ -1015,6 +1056,13 @@ #ifdef CONFIG_SSB_SERIAL extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, +@@ -661,5 +668,6 @@ enum ssb_pmu_ldo_volt_id { + void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, + enum ssb_pmu_ldo_volt_id id, u32 voltage); + void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); ++void ssb_pmu_spuravoid_pllupdate(struct ssb_chipcommon *cc, int spuravoid); + + #endif /* LINUX_SSB_CHIPCO_H_ */ --- a/include/linux/ssb/ssb_driver_extif.h +++ b/include/linux/ssb/ssb_driver_extif.h @@ -152,12 +152,16 @@ @@ -1127,6 +1175,23 @@ extern void ssb_mipscore_init(struct ssb_mipscore *mcore); --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h +@@ -289,11 +289,11 @@ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_ANTAVAIL 0x005C /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 8 + #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 @@ -485,7 +485,7 @@ #define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 #define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 @@ -1158,3 +1223,58 @@ + return wdt->driver_data; +} +#endif /* LINUX_BCM47XX_WDT_H_ */ +--- a/drivers/net/wireless/b43/phy_n.c ++++ b/drivers/net/wireless/b43/phy_n.c +@@ -4583,7 +4583,8 @@ static void b43_nphy_pmu_spur_avoid(stru + #endif + #ifdef CONFIG_B43_SSB + case B43_BUS_SSB: +- /* FIXME */ ++ ssb_pmu_spuravoid_pllupdate(&dev->dev->sdev->bus->chipco, ++ avoid); + break; + #endif + } +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -339,6 +339,21 @@ static s8 r123_extract_antgain(u8 sprom_ + return (s8)gain; + } + ++static void sprom_extract_r23(struct ssb_sprom *out, const u16 *in) ++{ ++ SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(opo, SSB_SPROM2_OPO, SSB_SPROM2_OPO_VALUE, 0); ++ SPEX(pa1lob0, SSB_SPROM2_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM2_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM2_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM2_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM2_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM2_PA1HIB2, 0xFFFF, 0); ++ SPEX(maxpwr_ah, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_HI, 0); ++ SPEX(maxpwr_al, SSB_SPROM2_MAXP_A, SSB_SPROM2_MAXP_A_LO, ++ SSB_SPROM2_MAXP_A_LO_SHIFT); ++} ++ + static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in) + { + int i; +@@ -398,8 +413,7 @@ static void sprom_extract_r123(struct ss + SSB_SPROM1_ITSSI_A_SHIFT); + SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0); + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); +- if (out->revision >= 2) +- SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ + SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); + SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); + +@@ -410,6 +424,8 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.a1 = r123_extract_antgain(out->revision, in, + SSB_SPROM1_AGAIN_A, + SSB_SPROM1_AGAIN_A_SHIFT); ++ if (out->revision >= 2) ++ sprom_extract_r23(out, in); + } + + /* Revs 4 5 and 8 have partially shared layout */ |