aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/patches-3.3/132-solos-dma.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic/patches-3.3/132-solos-dma.patch')
-rw-r--r--target/linux/generic/patches-3.3/132-solos-dma.patch442
1 files changed, 0 insertions, 442 deletions
diff --git a/target/linux/generic/patches-3.3/132-solos-dma.patch b/target/linux/generic/patches-3.3/132-solos-dma.patch
deleted file mode 100644
index beba891250..0000000000
--- a/target/linux/generic/patches-3.3/132-solos-dma.patch
+++ /dev/null
@@ -1,442 +0,0 @@
-commit b4bd8ad9bb311e8536f726f7a633620ccd358cde
-Author: David Woodhouse <dwmw2@infradead.org>
-Date: Thu May 24 04:58:27 2012 +0000
-
- solos-pci: Fix DMA support
-
- DMA support has finally made its way to the top of the TODO list, having
- realised that a Geode using MMIO can't keep up with two ADSL2+ lines
- each running at 21Mb/s.
-
- This patch fixes a couple of bugs in the DMA support in the driver, so
- once the corresponding FPGA update is complete and tested everything
- should work properly.
-
- We weren't storing the currently-transmitting skb, so we were never
- unmapping it and never freeing/popping it when the TX was done.
- And the addition of pci_set_master() is fairly self-explanatory.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Cc: stable@kernel.org
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 152a2a8b5e1d4cbe91a7c66f1028db15164a3766
-Author: David Woodhouse <David.Woodhouse@intel.com>
-Date: Wed Dec 19 11:01:21 2012 +0000
-
- solos-pci: ensure all TX packets are aligned to 4 bytes
-
- The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
- if skb->data isn't suitably aligned.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 13af816469db3449c072afbae6c4c1bd9ccecccb
-Author: Nathan Williams <nathan@traverse.com.au>
-Date: Wed Dec 19 11:01:20 2012 +0000
-
- solos-pci: add firmware upgrade support for new models
-
- Signed-off-by: Nathan Williams <nathan@traverse.com.au>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit 7fbdadb5e951e4f0c0fc991ff5f50295568786e6
-Author: Nathan Williams <nathan@traverse.com.au>
-Date: Wed Dec 19 11:01:19 2012 +0000
-
- solos-pci: remove superfluous debug output
-
- Signed-off-by: Nathan Williams <nathan@traverse.com.au>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit f9baad02e7411d9f38d5ebe1a1cdcde4ceec100d
-Author: Nathan Williams <nathan@traverse.com.au>
-Date: Wed Dec 19 11:01:18 2012 +0000
-
- solos-pci: add GPIO support for newer versions on Geos board
-
- dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
- only register on newer boards, register under PCI device instead of
- duplicating them under each ATM device.
-
- Signed-off-by: Nathan Williams <nathan@traverse.com.au>
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-commit cae49ede00ec3d0cda290b03fee55b72b49efc11
-Author: David Woodhouse <dwmw2@infradead.org>
-Date: Tue Dec 11 14:57:14 2012 +0000
-
- solos-pci: fix double-free of TX skb in DMA mode
-
- We weren't clearing card->tx_skb[port] when processing the TX done interrupt.
- If there wasn't another skb ready to transmit immediately, this led to a
- double-free because we'd free it *again* next time we did have a packet to
- send.
-
- Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
- Cc: stable@kernel.org
- Signed-off-by: David S. Miller <davem@davemloft.net>
-
-==
-There is a typo here so we do a double lock instead of an unlock.
-
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
----
-Only needed in linux-next. Introduced in f9baad02e7411d9 [14/17]
-solos-pci: add GPIO support for newer versions on Geos board
-
-
---- a/drivers/atm/solos-pci.c
-+++ b/drivers/atm/solos-pci.c
-@@ -42,7 +42,8 @@
- #include <linux/swab.h>
- #include <linux/slab.h>
-
--#define VERSION "0.07"
-+#define VERSION "1.04"
-+#define DRIVER_VERSION 0x01
- #define PTAG "solos-pci"
-
- #define CONFIG_RAM_SIZE 128
-@@ -56,16 +57,21 @@
- #define FLASH_BUSY 0x60
- #define FPGA_MODE 0x5C
- #define FLASH_MODE 0x58
-+#define GPIO_STATUS 0x54
-+#define DRIVER_VER 0x50
- #define TX_DMA_ADDR(port) (0x40 + (4 * (port)))
- #define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
-
- #define DATA_RAM_SIZE 32768
- #define BUF_SIZE 2048
- #define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
--#define FPGA_PAGE 528 /* FPGA flash page size*/
--#define SOLOS_PAGE 512 /* Solos flash page size*/
--#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
--#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
-+/* Old boards use ATMEL AD45DB161D flash */
-+#define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
-+#define ATMEL_SOLOS_PAGE 512 /* Solos flash page size*/
-+#define ATMEL_FPGA_BLOCK (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
-+#define ATMEL_SOLOS_BLOCK (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
-+/* Current boards use M25P/M25PE SPI flash */
-+#define SPI_FLASH_BLOCK (256 * 64)
-
- #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
- #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
-@@ -123,11 +129,14 @@ struct solos_card {
- struct sk_buff_head cli_queue[4];
- struct sk_buff *tx_skb[4];
- struct sk_buff *rx_skb[4];
-+ unsigned char *dma_bounce;
- wait_queue_head_t param_wq;
- wait_queue_head_t fw_wq;
- int using_dma;
-+ int dma_alignment;
- int fpga_version;
- int buffer_size;
-+ int atmel_flash;
- };
-
-
-@@ -452,7 +461,6 @@ static ssize_t console_show(struct devic
-
- len = skb->len;
- memcpy(buf, skb->data, len);
-- dev_dbg(&card->dev->dev, "len: %d\n", len);
-
- kfree_skb(skb);
- return len;
-@@ -499,6 +507,78 @@ static ssize_t console_store(struct devi
- return err?:count;
- }
-
-+struct geos_gpio_attr {
-+ struct device_attribute attr;
-+ int offset;
-+};
-+
-+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset) \
-+ struct geos_gpio_attr gpio_attr_##_name = { \
-+ .attr = __ATTR(_name, _mode, _show, _store), \
-+ .offset = _offset }
-+
-+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
-+ struct solos_card *card = pci_get_drvdata(pdev);
-+ uint32_t data32;
-+
-+ if (count != 1 && (count != 2 || buf[1] != '\n'))
-+ return -EINVAL;
-+
-+ spin_lock_irq(&card->param_queue_lock);
-+ data32 = ioread32(card->config_regs + GPIO_STATUS);
-+ if (buf[0] == '1') {
-+ data32 |= 1 << gattr->offset;
-+ iowrite32(data32, card->config_regs + GPIO_STATUS);
-+ } else if (buf[0] == '0') {
-+ data32 &= ~(1 << gattr->offset);
-+ iowrite32(data32, card->config_regs + GPIO_STATUS);
-+ } else {
-+ count = -EINVAL;
-+ }
-+ spin_unlock_irq(&card->param_queue_lock);
-+ return count;
-+}
-+
-+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
-+ struct solos_card *card = pci_get_drvdata(pdev);
-+ uint32_t data32;
-+
-+ data32 = ioread32(card->config_regs + GPIO_STATUS);
-+ data32 = (data32 >> gattr->offset) & 1;
-+
-+ return sprintf(buf, "%d\n", data32);
-+}
-+
-+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-+ struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
-+ struct solos_card *card = pci_get_drvdata(pdev);
-+ uint32_t data32;
-+
-+ data32 = ioread32(card->config_regs + GPIO_STATUS);
-+ switch (gattr->offset) {
-+ case 0:
-+ /* HardwareVersion */
-+ data32 = data32 & 0x1F;
-+ break;
-+ case 1:
-+ /* HardwareVariant */
-+ data32 = (data32 >> 5) & 0x0F;
-+ break;
-+ }
-+ return sprintf(buf, "%d\n", data32);
-+}
-+
- static DEVICE_ATTR(console, 0644, console_show, console_store);
-
-
-@@ -507,6 +587,14 @@ static DEVICE_ATTR(console, 0644, consol
-
- #include "solos-attrlist.c"
-
-+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
-+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
-+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
-+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
-+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
-+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
-+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
-+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
- #undef SOLOS_ATTR_RO
- #undef SOLOS_ATTR_RW
-
-@@ -523,6 +611,23 @@ static struct attribute_group solos_attr
- .name = "parameters",
- };
-
-+static struct attribute *gpio_attrs[] = {
-+ &gpio_attr_GPIO1.attr.attr,
-+ &gpio_attr_GPIO2.attr.attr,
-+ &gpio_attr_GPIO3.attr.attr,
-+ &gpio_attr_GPIO4.attr.attr,
-+ &gpio_attr_GPIO5.attr.attr,
-+ &gpio_attr_PushButton.attr.attr,
-+ &gpio_attr_HardwareVersion.attr.attr,
-+ &gpio_attr_HardwareVariant.attr.attr,
-+ NULL
-+};
-+
-+static struct attribute_group gpio_attr_group = {
-+ .attrs = gpio_attrs,
-+ .name = "gpio",
-+};
-+
- static int flash_upgrade(struct solos_card *card, int chip)
- {
- const struct firmware *fw;
-@@ -534,16 +639,25 @@ static int flash_upgrade(struct solos_ca
- switch (chip) {
- case 0:
- fw_name = "solos-FPGA.bin";
-- blocksize = FPGA_BLOCK;
-+ if (card->atmel_flash)
-+ blocksize = ATMEL_FPGA_BLOCK;
-+ else
-+ blocksize = SPI_FLASH_BLOCK;
- break;
- case 1:
- fw_name = "solos-Firmware.bin";
-- blocksize = SOLOS_BLOCK;
-+ if (card->atmel_flash)
-+ blocksize = ATMEL_SOLOS_BLOCK;
-+ else
-+ blocksize = SPI_FLASH_BLOCK;
- break;
- case 2:
- if (card->fpga_version > LEGACY_BUFFERS){
- fw_name = "solos-db-FPGA.bin";
-- blocksize = FPGA_BLOCK;
-+ if (card->atmel_flash)
-+ blocksize = ATMEL_FPGA_BLOCK;
-+ else
-+ blocksize = SPI_FLASH_BLOCK;
- } else {
- dev_info(&card->dev->dev, "FPGA version doesn't support"
- " daughter board upgrades\n");
-@@ -553,7 +667,10 @@ static int flash_upgrade(struct solos_ca
- case 3:
- if (card->fpga_version > LEGACY_BUFFERS){
- fw_name = "solos-Firmware.bin";
-- blocksize = SOLOS_BLOCK;
-+ if (card->atmel_flash)
-+ blocksize = ATMEL_SOLOS_BLOCK;
-+ else
-+ blocksize = SPI_FLASH_BLOCK;
- } else {
- dev_info(&card->dev->dev, "FPGA version doesn't support"
- " daughter board upgrades\n");
-@@ -569,6 +686,9 @@ static int flash_upgrade(struct solos_ca
-
- dev_info(&card->dev->dev, "Flash upgrade starting\n");
-
-+ /* New FPGAs require driver version before permitting flash upgrades */
-+ iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
-+
- numblocks = fw->size / blocksize;
- dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
- dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
-@@ -598,9 +718,13 @@ static int flash_upgrade(struct solos_ca
- /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
- iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
-
-- /* Copy block to buffer, swapping each 16 bits */
-+ /* Copy block to buffer, swapping each 16 bits for Atmel flash */
- for(i = 0; i < blocksize; i += 4) {
-- uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
-+ uint32_t word;
-+ if (card->atmel_flash)
-+ word = swahb32p((uint32_t *)(fw->data + offset + i));
-+ else
-+ word = *(uint32_t *)(fw->data + offset + i);
- if(card->fpga_version > LEGACY_BUFFERS)
- iowrite32(word, FLASH_BUF + i);
- else
-@@ -945,10 +1069,11 @@ static uint32_t fpga_tx(struct solos_car
- for (port = 0; tx_pending; tx_pending >>= 1, port++) {
- if (tx_pending & 1) {
- struct sk_buff *oldskb = card->tx_skb[port];
-- if (oldskb)
-+ if (oldskb) {
- pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
- oldskb->len, PCI_DMA_TODEVICE);
--
-+ card->tx_skb[port] = NULL;
-+ }
- spin_lock(&card->tx_queue_lock);
- skb = skb_dequeue(&card->tx_queue[port]);
- if (!skb)
-@@ -960,8 +1085,14 @@ static uint32_t fpga_tx(struct solos_car
- tx_started |= 1 << port;
- oldskb = skb; /* We're done with this skb already */
- } else if (skb && card->using_dma) {
-- SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
-+ unsigned char *data = skb->data;
-+ if ((unsigned long)data & card->dma_alignment) {
-+ data = card->dma_bounce + (BUF_SIZE * port);
-+ memcpy(data, skb->data, skb->len);
-+ }
-+ SKB_CB(skb)->dma_addr = pci_map_single(card->dev, data,
- skb->len, PCI_DMA_TODEVICE);
-+ card->tx_skb[port] = skb;
- iowrite32(SKB_CB(skb)->dma_addr,
- card->config_regs + TX_DMA_ADDR(port));
- }
-@@ -1133,17 +1264,33 @@ static int fpga_probe(struct pci_dev *de
- db_fpga_upgrade = db_firmware_upgrade = 0;
- }
-
-- if (card->fpga_version >= DMA_SUPPORTED){
-+ /* Stopped using Atmel flash after 0.03-38 */
-+ if (fpga_ver < 39)
-+ card->atmel_flash = 1;
-+ else
-+ card->atmel_flash = 0;
-+
-+ data32 = ioread32(card->config_regs + PORTS);
-+ card->nr_ports = (data32 & 0x000000FF);
-+
-+ if (card->fpga_version >= DMA_SUPPORTED) {
-+ pci_set_master(dev);
- card->using_dma = 1;
-+ if (1) { /* All known FPGA versions so far */
-+ card->dma_alignment = 3;
-+ card->dma_bounce = kmalloc(card->nr_ports * BUF_SIZE, GFP_KERNEL);
-+ if (!card->dma_bounce) {
-+ dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
-+ /* Fallback to MMIO doesn't work */
-+ goto out_unmap_both;
-+ }
-+ }
- } else {
- card->using_dma = 0;
- /* Set RX empty flag for all ports */
- iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
- }
-
-- data32 = ioread32(card->config_regs + PORTS);
-- card->nr_ports = (data32 & 0x000000FF);
--
- pci_set_drvdata(dev, card);
-
- tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
-@@ -1178,6 +1325,10 @@ static int fpga_probe(struct pci_dev *de
- if (err)
- goto out_free_irq;
-
-+ if (card->fpga_version >= DMA_SUPPORTED &&
-+ sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
-+ dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
-+
- return 0;
-
- out_free_irq:
-@@ -1186,6 +1337,7 @@ static int fpga_probe(struct pci_dev *de
- tasklet_kill(&card->tlet);
-
- out_unmap_both:
-+ kfree(card->dma_bounce);
- pci_set_drvdata(dev, NULL);
- pci_iounmap(dev, card->buffers);
- out_unmap_config:
-@@ -1288,11 +1440,16 @@ static void fpga_remove(struct pci_dev *
- iowrite32(1, card->config_regs + FPGA_MODE);
- (void)ioread32(card->config_regs + FPGA_MODE);
-
-+ if (card->fpga_version >= DMA_SUPPORTED)
-+ sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
-+
- atm_remove(card);
-
- free_irq(dev->irq, card);
- tasklet_kill(&card->tlet);
-
-+ kfree(card->dma_bounce);
-+
- /* Release device from reset */
- iowrite32(0, card->config_regs + FPGA_MODE);
- (void)ioread32(card->config_regs + FPGA_MODE);