diff options
Diffstat (limited to 'target/linux/generic/patches-3.10/771-bgmac-pending.patch')
| -rw-r--r-- | target/linux/generic/patches-3.10/771-bgmac-pending.patch | 78 |
1 files changed, 0 insertions, 78 deletions
diff --git a/target/linux/generic/patches-3.10/771-bgmac-pending.patch b/target/linux/generic/patches-3.10/771-bgmac-pending.patch deleted file mode 100644 index 42a5fe3110..0000000000 --- a/target/linux/generic/patches-3.10/771-bgmac-pending.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/drivers/net/ethernet/broadcom/bgmac.c -+++ b/drivers/net/ethernet/broadcom/bgmac.c -@@ -725,11 +725,9 @@ static void bgmac_phy_reset(struct bgmac - if (bgmac->phyaddr == BGMAC_PHY_NOREGS) - return; - -- bgmac_phy_write(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL, -- BGMAC_PHY_CTL_RESET); -+ bgmac_phy_write(bgmac, bgmac->phyaddr, MII_BMCR, BMCR_RESET); - udelay(100); -- if (bgmac_phy_read(bgmac, bgmac->phyaddr, BGMAC_PHY_CTL) & -- BGMAC_PHY_CTL_RESET) -+ if (bgmac_phy_read(bgmac, bgmac->phyaddr, MII_BMCR) & BMCR_RESET) - bgmac_err(bgmac, "PHY reset failed\n"); - bgmac_phy_init(bgmac); - } -@@ -1200,27 +1198,11 @@ static int bgmac_set_mac_address(struct - static int bgmac_ioctl(struct net_device *net_dev, struct ifreq *ifr, int cmd) - { - struct bgmac *bgmac = netdev_priv(net_dev); -- struct mii_ioctl_data *data = if_mii(ifr); - -- switch (cmd) { -- case SIOCGMIIPHY: -- data->phy_id = bgmac->phyaddr; -- /* fallthru */ -- case SIOCGMIIREG: -- if (!netif_running(net_dev)) -- return -EAGAIN; -- data->val_out = bgmac_phy_read(bgmac, data->phy_id, -- data->reg_num & 0x1f); -- return 0; -- case SIOCSMIIREG: -- if (!netif_running(net_dev)) -- return -EAGAIN; -- bgmac_phy_write(bgmac, data->phy_id, data->reg_num & 0x1f, -- data->val_in); -- return 0; -- default: -- return -EOPNOTSUPP; -- } -+ if (!netif_running(net_dev)) -+ return -EINVAL; -+ -+ return phy_mii_ioctl(bgmac->phy_dev, ifr, cmd); - } - - static const struct net_device_ops bgmac_netdev_ops = { ---- a/drivers/net/ethernet/broadcom/bgmac.h -+++ b/drivers/net/ethernet/broadcom/bgmac.h -@@ -220,27 +220,6 @@ - #define BGMAC_RX_STATUS 0xb38 - #define BGMAC_TX_STATUS 0xb3c - --#define BGMAC_PHY_CTL 0x00 --#define BGMAC_PHY_CTL_SPEED_MSB 0x0040 --#define BGMAC_PHY_CTL_DUPLEX 0x0100 /* duplex mode */ --#define BGMAC_PHY_CTL_RESTART 0x0200 /* restart autonegotiation */ --#define BGMAC_PHY_CTL_ANENAB 0x1000 /* enable autonegotiation */ --#define BGMAC_PHY_CTL_SPEED 0x2000 --#define BGMAC_PHY_CTL_LOOP 0x4000 /* loopback */ --#define BGMAC_PHY_CTL_RESET 0x8000 /* reset */ --/* Helpers */ --#define BGMAC_PHY_CTL_SPEED_10 0 --#define BGMAC_PHY_CTL_SPEED_100 BGMAC_PHY_CTL_SPEED --#define BGMAC_PHY_CTL_SPEED_1000 BGMAC_PHY_CTL_SPEED_MSB --#define BGMAC_PHY_ADV 0x04 --#define BGMAC_PHY_ADV_10HALF 0x0020 /* advertise 10MBits/s half duplex */ --#define BGMAC_PHY_ADV_10FULL 0x0040 /* advertise 10MBits/s full duplex */ --#define BGMAC_PHY_ADV_100HALF 0x0080 /* advertise 100MBits/s half duplex */ --#define BGMAC_PHY_ADV_100FULL 0x0100 /* advertise 100MBits/s full duplex */ --#define BGMAC_PHY_ADV2 0x09 --#define BGMAC_PHY_ADV2_1000HALF 0x0100 /* advertise 1000MBits/s half duplex */ --#define BGMAC_PHY_ADV2_1000FULL 0x0200 /* advertise 1000MBits/s full duplex */ -- - /* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */ - #define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */ - #define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */ |