diff options
Diffstat (limited to 'target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h')
| -rw-r--r-- | target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h b/target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h new file mode 100644 index 0000000000..29eec38dd2 --- /dev/null +++ b/target/linux/generic/files/include/dt-bindings/mtd/partitions/uimage.h @@ -0,0 +1,191 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * *** IMPORTANT *** + * This file is not only included from C-code but also from devicetree source + * files. As such this file MUST only contain comments and defines. + * + * Based on image.h from U-Boot which is + * (C) Copyright 2008 Semihalf + * (C) Copyright 2000-2005 Wolfgang Denk, DENX Software Engineering, wd@denx.de. + */ + +#ifndef __UIMAGE_H__ +#define __UIMAGE_H__ + +/* + * Operating System Codes + * + * The following are exposed to uImage header. + * New IDs *MUST* be appended at the end of the list and *NEVER* + * inserted for backward compatibility. + */ +#define IH_OS_INVALID 0 /* Invalid OS */ +#define IH_OS_OPENBSD 1 /* OpenBSD */ +#define IH_OS_NETBSD 2 /* NetBSD */ +#define IH_OS_FREEBSD 3 /* FreeBSD */ +#define IH_OS_4_4BSD 4 /* 4.4BSD */ +#define IH_OS_LINUX 5 /* Linux */ +#define IH_OS_SVR4 6 /* SVR4 */ +#define IH_OS_ESIX 7 /* Esix */ +#define IH_OS_SOLARIS 8 /* Solaris */ +#define IH_OS_IRIX 9 /* Irix */ +#define IH_OS_SCO 10 /* SCO */ +#define IH_OS_DELL 11 /* Dell */ +#define IH_OS_NCR 12 /* NCR */ +#define IH_OS_LYNXOS 13 /* LynxOS */ +#define IH_OS_VXWORKS 14 /* VxWorks */ +#define IH_OS_PSOS 15 /* pSOS */ +#define IH_OS_QNX 16 /* QNX */ +#define IH_OS_U_BOOT 17 /* Firmware */ +#define IH_OS_RTEMS 18 /* RTEMS */ +#define IH_OS_ARTOS 19 /* ARTOS */ +#define IH_OS_UNITY 20 /* Unity OS */ +#define IH_OS_INTEGRITY 21 /* INTEGRITY */ +#define IH_OS_OSE 22 /* OSE */ +#define IH_OS_PLAN9 23 /* Plan 9 */ +#define IH_OS_OPENRTOS 24 /* OpenRTOS */ +#define IH_OS_ARM_TRUSTED_FIRMWARE 25 /* ARM Trusted Firmware */ +#define IH_OS_TEE 26 /* Trusted Execution Environment */ +#define IH_OS_OPENSBI 27 /* RISC-V OpenSBI */ +#define IH_OS_EFI 28 /* EFI Firmware (e.g. GRUB2) */ + +/* + * CPU Architecture Codes (supported by Linux) + * + * The following are exposed to uImage header. + * New IDs *MUST* be appended at the end of the list and *NEVER* + * inserted for backward compatibility. + */ +#define IH_ARCH_INVALID 0 /* Invalid CPU */ +#define IH_ARCH_ALPHA 1 /* Alpha */ +#define IH_ARCH_ARM 2 /* ARM */ +#define IH_ARCH_I386 3 /* Intel x86 */ +#define IH_ARCH_IA64 4 /* IA64 */ +#define IH_ARCH_MIPS 5 /* MIPS */ +#define IH_ARCH_MIPS64 6 /* MIPS 64 Bit */ +#define IH_ARCH_PPC 7 /* PowerPC */ +#define IH_ARCH_S390 8 /* IBM S390 */ +#define IH_ARCH_SH 9 /* SuperH */ +#define IH_ARCH_SPARC 10 /* Sparc */ +#define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */ +#define IH_ARCH_M68K 12 /* M68K */ +#define IH_ARCH_NIOS 13 /* Nios-32 */ +#define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */ +#define IH_ARCH_NIOS2 15 /* Nios-II */ +#define IH_ARCH_BLACKFIN 16 /* Blackfin */ +#define IH_ARCH_AVR32 17 /* AVR32 */ +#define IH_ARCH_ST200 18 /* STMicroelectronics ST200 */ +#define IH_ARCH_SANDBOX 19 /* Sandbox architecture (test only) */ +#define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */ +#define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */ +#define IH_ARCH_ARM64 22 /* ARM64 */ +#define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */ +#define IH_ARCH_X86_64 24 /* AMD x86_64, Intel and Via */ +#define IH_ARCH_XTENSA 25 /* Xtensa */ +#define IH_ARCH_RISCV 26 /* RISC-V */ + +/* + * Image Types + * + * "Standalone Programs" are directly runnable in the environment + * provided by U-Boot; it is expected that (if they behave + * well) you can continue to work in U-Boot after return from + * the Standalone Program. + * "OS Kernel Images" are usually images of some Embedded OS which + * will take over control completely. Usually these programs + * will install their own set of exception handlers, device + * drivers, set up the MMU, etc. - this means, that you cannot + * expect to re-enter U-Boot except by resetting the CPU. + * "RAMDisk Images" are more or less just data blocks, and their + * parameters (address, size) are passed to an OS kernel that is + * being started. + * "Multi-File Images" contain several images, typically an OS + * (Linux) kernel image and one or more data images like + * RAMDisks. This construct is useful for instance when you want + * to boot over the network using BOOTP etc., where the boot + * server provides just a single image file, but you want to get + * for instance an OS kernel and a RAMDisk image. + * + * "Multi-File Images" start with a list of image sizes, each + * image size (in bytes) specified by an "uint32_t" in network + * byte order. This list is terminated by an "(uint32_t)0". + * Immediately after the terminating 0 follow the images, one by + * one, all aligned on "uint32_t" boundaries (size rounded up to + * a multiple of 4 bytes - except for the last file). + * + * "Firmware Images" are binary images containing firmware (like + * U-Boot or FPGA images) which usually will be programmed to + * flash memory. + * + * "Script files" are command sequences that will be executed by + * U-Boot's command interpreter; this feature is especially + * useful when you configure U-Boot to use a real shell (hush) + * as command interpreter (=> Shell Scripts). + * + * The following are exposed to uImage header. + * New IDs *MUST* be appended at the end of the list and *NEVER* + * inserted for backward compatibility. + */ +#define IH_TYPE_INVALID 0 /* Invalid Image */ +#define IH_TYPE_STANDALONE 1 /* Standalone Program */ +#define IH_TYPE_KERNEL 2 /* OS Kernel Image */ +#define IH_TYPE_RAMDISK 3 /* RAMDisk Image */ +#define IH_TYPE_MULTI 4 /* Multi-File Image */ +#define IH_TYPE_FIRMWARE 5 /* Firmware Image */ +#define IH_TYPE_SCRIPT 6 /* Script file */ +#define IH_TYPE_FILESYSTEM 7 /* Filesystem Image (any type) */ +#define IH_TYPE_FLATDT 8 /* Binary Flat Device Tree Blob */ +#define IH_TYPE_KWBIMAGE 9 /* Kirkwood Boot Image */ +#define IH_TYPE_IMXIMAGE 10 /* Freescale IMXBoot Image */ +#define IH_TYPE_UBLIMAGE 11 /* Davinci UBL Image */ +#define IH_TYPE_OMAPIMAGE 12 /* TI OMAP Config Header Image */ +#define IH_TYPE_AISIMAGE 13 /* TI Davinci AIS Image */ + /* OS Kernel Image, can run from any load address */ +#define IH_TYPE_KERNEL_NOLOAD 14 +#define IH_TYPE_PBLIMAGE 15 /* Freescale PBL Boot Image */ +#define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */ +#define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */ +#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */ +#define IH_TYPE_SOCFPGAIMAGE 19 /* Altera SOCFPGA CV/AV Preloader */ +#define IH_TYPE_X86_SETUP 20 /* x86 setup.bin Image */ +#define IH_TYPE_LPC32XXIMAGE 21 /* x86 setup.bin Image */ +#define IH_TYPE_LOADABLE 22 /* A list of typeless images */ +#define IH_TYPE_RKIMAGE 23 /* Rockchip Boot Image */ +#define IH_TYPE_RKSD 24 /* Rockchip SD card */ +#define IH_TYPE_RKSPI 25 /* Rockchip SPI image */ +#define IH_TYPE_ZYNQIMAGE 26 /* Xilinx Zynq Boot Image */ +#define IH_TYPE_ZYNQMPIMAGE 27 /* Xilinx ZynqMP Boot Image */ +#define IH_TYPE_ZYNQMPBIF 28 /* Xilinx ZynqMP Boot Image (bif) */ +#define IH_TYPE_FPGA 29 /* FPGA Image */ +#define IH_TYPE_VYBRIDIMAGE 30 /* VYBRID .vyb Image */ +#define IH_TYPE_TEE 31 /* Trusted Execution Environment OS Image */ +#define IH_TYPE_FIRMWARE_IVT 32 /* Firmware Image with HABv4 IVT */ +#define IH_TYPE_PMMC 33 /* TI Power Management Micro-Controller Firmware */ +#define IH_TYPE_STM32IMAGE 34 /* STMicroelectronics STM32 Image */ +#define IH_TYPE_SOCFPGAIMAGE_V1 35 /* Altera SOCFPGA A10 Preloader */ +#define IH_TYPE_MTKIMAGE 36 /* MediaTek BootROM loadable Image */ +#define IH_TYPE_IMX8MIMAGE 37 /* Freescale IMX8MBoot Image */ +#define IH_TYPE_IMX8IMAGE 38 /* Freescale IMX8Boot Image */ +#define IH_TYPE_COPRO 39 /* Coprocessor Image for remoteproc*/ + + +/* + * Compression Types + * + * The following are exposed to uImage header. + * New IDs *MUST* be appended at the end of the list and *NEVER* + * inserted for backward compatibility. + */ +#define IH_COMP_NONE 0 /* No Compression Used */ +#define IH_COMP_GZIP 1 /* gzip Compression Used */ +#define IH_COMP_BZIP2 2 /* bzip2 Compression Used */ +#define IH_COMP_LZMA 3 /* lzma Compression Used */ +#define IH_COMP_LZO 4 /* lzo Compression Used */ +#define IH_COMP_LZ4 5 /* lz4 Compression Used */ + + +#define LZ4F_MAGIC 0x184D2204 /* LZ4 Magic Number */ +#define IH_MAGIC 0x27051956 /* Image Magic Number */ +#define IH_NMLEN 32 /* Image Name Length */ + +#endif /* __UIMAGE_H__ */ |