1 files changed, 27 insertions, 43 deletions

diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c
index 27b062bc47..f3c953b808 100644
--- a/target/linux/generic/files/drivers/net/phy/ar8216.c
+++ b/target/linux/generic/files/drivers/net/phy/ar8216.c
@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device *phydev)
 	if (ret & BMCR_ANENABLE)
 		return 0;
 
-	dev_info(&phydev->dev, "ANEG disabled, re-enabling ...\n");
+	dev_info(&phydev->mdio.dev, "ANEG disabled, re-enabling ...\n");
 	ret |= BMCR_ANENABLE | BMCR_ANRESTART;
 	return phy_write(phydev, MII_BMCR, ret);
 }
@@ -1996,7 +1996,7 @@ ar8xxx_phy_config_init(struct phy_device *phydev)
 
 	priv->phy = phydev;
 
-	if (phydev->addr != 0) {
+	if (phydev->mdio.addr != 0) {
 		if (chip_is_ar8316(priv)) {
 			/* switch device has been initialized, reinit */
 			priv->dev.ports = (AR8216_NUM_PORTS - 1);
@@ -2044,7 +2044,7 @@ ar8xxx_check_link_states(struct ar8xxx_priv *priv)
 		/* flush ARL entries for this port if it went down*/
 		if (!link_new)
 			priv->chip->atu_flush_port(priv, i);
-		dev_info(&priv->phy->dev, "Port %d is %s\n",
+		dev_info(&priv->phy->mdio.dev, "Port %d is %s\n",
 			 i, link_new ? "up" : "down");
 	}
 
@@ -2063,10 +2063,10 @@ ar8xxx_phy_read_status(struct phy_device *phydev)
 	if (phydev->state == PHY_CHANGELINK)
 		ar8xxx_check_link_states(priv);
 
-	if (phydev->addr != 0)
+	if (phydev->mdio.addr != 0)
 		return genphy_read_status(phydev);
 
-	ar8216_read_port_link(priv, phydev->addr, &link);
+	ar8216_read_port_link(priv, phydev->mdio.addr, &link);
 	phydev->link = !!link.link;
 	if (!phydev->link)
 		return 0;
@@ -2096,7 +2096,7 @@ ar8xxx_phy_read_status(struct phy_device *phydev)
 static int
 ar8xxx_phy_config_aneg(struct phy_device *phydev)
 {
-	if (phydev->addr == 0)
+	if (phydev->mdio.addr == 0)
 		return 0;
 
 	return genphy_config_aneg(phydev);
@@ -2151,15 +2151,15 @@ ar8xxx_phy_probe(struct phy_device *phydev)
 	int ret;
 
 	/* skip PHYs at unused adresses */
-	if (phydev->addr != 0 && phydev->addr != 4)
+	if (phydev->mdio.addr != 0 && phydev->mdio.addr != 4)
 		return -ENODEV;
 
-	if (!ar8xxx_is_possible(phydev->bus))
+	if (!ar8xxx_is_possible(phydev->mdio.bus))
 		return -ENODEV;
 
 	mutex_lock(&ar8xxx_dev_list_lock);
 	list_for_each_entry(priv, &ar8xxx_dev_list, list)
-		if (priv->mii_bus == phydev->bus)
+		if (priv->mii_bus == phydev->mdio.bus)
 			goto found;
 
 	priv = ar8xxx_create();
@@ -2168,7 +2168,7 @@ ar8xxx_phy_probe(struct phy_device *phydev)
 		goto unlock;
 	}
 
-	priv->mii_bus = phydev->bus;
+	priv->mii_bus = phydev->mdio.bus;
 
 	ret = ar8xxx_probe_switch(priv);
 	if (ret)
@@ -2189,7 +2189,7 @@ ar8xxx_phy_probe(struct phy_device *phydev)
 found:
 	priv->use_count++;
 
-	if (phydev->addr == 0) {
+	if (phydev->mdio.addr == 0) {
 		if (ar8xxx_has_gige(priv)) {
 			phydev->supported = SUPPORTED_1000baseT_Full;
 			phydev->advertising = ADVERTISED_1000baseT_Full;
@@ -2270,44 +2270,28 @@ ar8xxx_phy_remove(struct phy_device *phydev)
 	ar8xxx_free(priv);
 }
 
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)
 static int
 ar8xxx_phy_soft_reset(struct phy_device *phydev)
 {
 	/* we don't need an extra reset */
 	return 0;
 }
-#endif
-
-static struct phy_driver ar8xxx_phy_driver = {
-	.phy_id		= 0x004d0000,
-	.name		= "Atheros AR8216/AR8236/AR8316",
-	.phy_id_mask	= 0xffff0000,
-	.features	= PHY_BASIC_FEATURES,
-	.probe		= ar8xxx_phy_probe,
-	.remove		= ar8xxx_phy_remove,
-	.detach		= ar8xxx_phy_detach,
-	.config_init	= ar8xxx_phy_config_init,
-	.config_aneg	= ar8xxx_phy_config_aneg,
-	.read_status	= ar8xxx_phy_read_status,
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0)
-	.soft_reset	= ar8xxx_phy_soft_reset,
-#endif
-	.driver		= { .owner = THIS_MODULE },
-};
 
-int __init
-ar8xxx_init(void)
-{
-	return phy_driver_register(&ar8xxx_phy_driver);
-}
-
-void __exit
-ar8xxx_exit(void)
-{
-	phy_driver_unregister(&ar8xxx_phy_driver);
-}
+static struct phy_driver ar8xxx_phy_driver[] = {
+	{
+		.phy_id		= 0x004d0000,
+		.name		= "Atheros AR8216/AR8236/AR8316",
+		.phy_id_mask	= 0xffff0000,
+		.features	= PHY_BASIC_FEATURES,
+		.probe		= ar8xxx_phy_probe,
+		.remove		= ar8xxx_phy_remove,
+		.detach		= ar8xxx_phy_detach,
+		.config_init	= ar8xxx_phy_config_init,
+		.config_aneg	= ar8xxx_phy_config_aneg,
+		.read_status	= ar8xxx_phy_read_status,
+		.soft_reset	= ar8xxx_phy_soft_reset,
+	}
+};
 
-module_init(ar8xxx_init);
-module_exit(ar8xxx_exit);
+module_phy_driver(ar8xxx_phy_driver);
 MODULE_LICENSE("GPL");