diff options
Diffstat (limited to 'target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch')
| -rw-r--r-- | target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch | 140 |
1 files changed, 140 insertions, 0 deletions
diff --git a/target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch b/target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch new file mode 100644 index 0000000000..da60c63905 --- /dev/null +++ b/target/linux/generic/backport-5.15/791-v6.2-03-net-phy-add-Motorcomm-YT8531S-phy-id.patch @@ -0,0 +1,140 @@ +From 813abcd98fb1b2cccf850cdfa092a4bfc50b2363 Mon Sep 17 00:00:00 2001 +From: Frank <Frank.Sae@motor-comm.com> +Date: Tue, 22 Nov 2022 16:42:32 +0800 +Subject: [PATCH] net: phy: add Motorcomm YT8531S phy id. + +We added patch for motorcomm.c to support YT8531S. This patch has +been tested on AM335x platform which has one YT8531S interface +card and passed all test cases. +The tested cases indluding: YT8531S UTP function with support of +10M/100M/1000M; YT8531S Fiber function with support of 100M/1000M; +and YT8531S Combo function that supports auto detection of media type. + +Since most functions of YT8531S are similar to YT8521 and we reuse some +codes for YT8521 in the patch file. + +Signed-off-by: Frank <Frank.Sae@motor-comm.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/phy/Kconfig | 2 +- + drivers/net/phy/motorcomm.c | 52 +++++++++++++++++++++++++++++++++---- + 2 files changed, 48 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -245,7 +245,7 @@ config MOTORCOMM_PHY + tristate "Motorcomm PHYs" + help + Enables support for Motorcomm network PHYs. +- Currently supports the YT8511, YT8521 Gigabit Ethernet PHYs. ++ Currently supports the YT8511, YT8521, YT8531S Gigabit Ethernet PHYs. + + config NATIONAL_PHY + tristate "National Semiconductor PHYs" +--- a/drivers/net/phy/motorcomm.c ++++ b/drivers/net/phy/motorcomm.c +@@ -1,6 +1,6 @@ + // SPDX-License-Identifier: GPL-2.0+ + /* +- * Motorcomm 8511/8521 PHY driver. ++ * Motorcomm 8511/8521/8531S PHY driver. + * + * Author: Peter Geis <pgwipeout@gmail.com> + * Author: Frank <Frank.Sae@motor-comm.com> +@@ -12,9 +12,10 @@ + #include <linux/phy.h> + + #define PHY_ID_YT8511 0x0000010a +-#define PHY_ID_YT8521 0x0000011A ++#define PHY_ID_YT8521 0x0000011A ++#define PHY_ID_YT8531S 0x4F51E91A + +-/* YT8521 Register Overview ++/* YT8521/YT8531S Register Overview + * UTP Register space | FIBER Register space + * ------------------------------------------------------------ + * | UTP MII | FIBER MII | +@@ -147,7 +148,7 @@ + #define YT8521_LINK_TIMER_CFG2_REG 0xA5 + #define YT8521_LTCR_EN_AUTOSEN BIT(15) + +-/* 0xA000, 0xA001, 0xA003 ,and 0xA006 ~ 0xA00A are common ext registers ++/* 0xA000, 0xA001, 0xA003, 0xA006 ~ 0xA00A and 0xA012 are common ext registers + * of yt8521 phy. There is no need to switch reg space when operating these + * registers. + */ +@@ -221,6 +222,9 @@ + */ + #define YTPHY_WCR_TYPE_PULSE BIT(0) + ++#define YT8531S_SYNCE_CFG_REG 0xA012 ++#define YT8531S_SCR_SYNCE_ENABLE BIT(6) ++ + /* Extended Register end */ + + struct yt8521_priv { +@@ -648,6 +652,26 @@ static int yt8521_probe(struct phy_devic + } + + /** ++ * yt8531s_probe() - read chip config then set suitable polling_mode ++ * @phydev: a pointer to a &struct phy_device ++ * ++ * returns 0 or negative errno code ++ */ ++static int yt8531s_probe(struct phy_device *phydev) ++{ ++ int ret; ++ ++ /* Disable SyncE clock output by default */ ++ ret = ytphy_modify_ext_with_lock(phydev, YT8531S_SYNCE_CFG_REG, ++ YT8531S_SCR_SYNCE_ENABLE, 0); ++ if (ret < 0) ++ return ret; ++ ++ /* same as yt8521_probe */ ++ return yt8521_probe(phydev); ++} ++ ++/** + * ytphy_utp_read_lpa() - read LPA then setup lp_advertising for utp + * @phydev: a pointer to a &struct phy_device + * +@@ -1750,11 +1774,28 @@ static struct phy_driver motorcomm_phy_d + .suspend = yt8521_suspend, + .resume = yt8521_resume, + }, ++ { ++ PHY_ID_MATCH_EXACT(PHY_ID_YT8531S), ++ .name = "YT8531S Gigabit Ethernet", ++ .get_features = yt8521_get_features, ++ .probe = yt8531s_probe, ++ .read_page = yt8521_read_page, ++ .write_page = yt8521_write_page, ++ .get_wol = ytphy_get_wol, ++ .set_wol = ytphy_set_wol, ++ .config_aneg = yt8521_config_aneg, ++ .aneg_done = yt8521_aneg_done, ++ .config_init = yt8521_config_init, ++ .read_status = yt8521_read_status, ++ .soft_reset = yt8521_soft_reset, ++ .suspend = yt8521_suspend, ++ .resume = yt8521_resume, ++ }, + }; + + module_phy_driver(motorcomm_phy_drvs); + +-MODULE_DESCRIPTION("Motorcomm 8511/8521 PHY driver"); ++MODULE_DESCRIPTION("Motorcomm 8511/8521/8531S PHY driver"); + MODULE_AUTHOR("Peter Geis"); + MODULE_AUTHOR("Frank"); + MODULE_LICENSE("GPL"); +@@ -1762,6 +1803,7 @@ MODULE_LICENSE("GPL"); + static const struct mdio_device_id __maybe_unused motorcomm_tbl[] = { + { PHY_ID_MATCH_EXACT(PHY_ID_YT8511) }, + { PHY_ID_MATCH_EXACT(PHY_ID_YT8521) }, ++ { PHY_ID_MATCH_EXACT(PHY_ID_YT8531S) }, + { /* sentinal */ } + }; + |