aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch')
-rw-r--r--target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch1863
1 files changed, 0 insertions, 1863 deletions
diff --git a/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch b/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch
deleted file mode 100644
index ae3b50bba5..0000000000
--- a/target/linux/generic-2.6/patches-2.6.27/978-ssb_update.patch
+++ /dev/null
@@ -1,1863 +0,0 @@
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -1,10 +1,11 @@
--menu "Sonics Silicon Backplane"
--
- config SSB_POSSIBLE
- bool
- depends on HAS_IOMEM && HAS_DMA
- default y
-
-+menu "Sonics Silicon Backplane"
-+ depends on SSB_POSSIBLE
-+
- config SSB
- tristate "Sonics Silicon Backplane support"
- depends on SSB_POSSIBLE
-@@ -52,11 +53,11 @@ config SSB_B43_PCI_BRIDGE
-
- config SSB_PCMCIAHOST_POSSIBLE
- bool
-- depends on SSB && (PCMCIA = y || PCMCIA = SSB) && EXPERIMENTAL
-+ depends on SSB && (PCMCIA = y || PCMCIA = SSB)
- default y
-
- config SSB_PCMCIAHOST
-- bool "Support for SSB on PCMCIA-bus host (EXPERIMENTAL)"
-+ bool "Support for SSB on PCMCIA-bus host"
- depends on SSB_PCMCIAHOST_POSSIBLE
- select SSB_SPROM
- help
-@@ -106,14 +107,14 @@ config SSB_DRIVER_PCICORE
- If unsure, say Y
-
- config SSB_PCICORE_HOSTMODE
-- bool "Hostmode support for SSB PCI core (EXPERIMENTAL)"
-- depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS && EXPERIMENTAL
-+ bool "Hostmode support for SSB PCI core"
-+ depends on SSB_DRIVER_PCICORE && SSB_DRIVER_MIPS
- help
- PCIcore hostmode operation (external PCI bus).
-
- config SSB_DRIVER_MIPS
-- bool "SSB Broadcom MIPS core driver (EXPERIMENTAL)"
-- depends on SSB && MIPS && EXPERIMENTAL
-+ bool "SSB Broadcom MIPS core driver"
-+ depends on SSB && MIPS
- select SSB_SERIAL
- help
- Driver for the Sonics Silicon Backplane attached
-@@ -125,11 +126,13 @@ config SSB_DRIVER_MIPS
- config SSB_EMBEDDED
- bool
- depends on SSB_DRIVER_MIPS
-+ select USB_EHCI_HCD_SSB if USB_EHCI_HCD
-+ select USB_OHCI_HCD_SSB if USB_OHCI_HCD
- default y
-
- config SSB_DRIVER_EXTIF
-- bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)"
-- depends on SSB_DRIVER_MIPS && EXPERIMENTAL
-+ bool "SSB Broadcom EXTIF core driver"
-+ depends on SSB_DRIVER_MIPS
- help
- Driver for the Sonics Silicon Backplane attached
- Broadcom EXTIF core.
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.
-
- # built-in drivers
- ssb-y += driver_chipcommon.o
-+ssb-y += driver_chipcommon_pmu.o
- ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
---- a/drivers/ssb/b43_pci_bridge.c
-+++ b/drivers/ssb/b43_pci_bridge.c
-@@ -18,9 +18,11 @@
-
- static const struct pci_device_id b43_pci_bridge_tbl[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4301) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4306) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4307) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4311) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
-@@ -29,6 +31,7 @@ static const struct pci_device_id b43_pc
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4329) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x432b) },
- { 0, },
- };
- MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
---- a/drivers/ssb/driver_chipcommon.c
-+++ b/drivers/ssb/driver_chipcommon.c
-@@ -26,19 +26,6 @@ enum ssb_clksrc {
- };
-
-
--static inline u32 chipco_read32(struct ssb_chipcommon *cc,
-- u16 offset)
--{
-- return ssb_read32(cc->dev, offset);
--}
--
--static inline void chipco_write32(struct ssb_chipcommon *cc,
-- u16 offset,
-- u32 value)
--{
-- ssb_write32(cc->dev, offset, value);
--}
--
- static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset,
- u32 mask, u32 value)
- {
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -473,6 +473,8 @@ static int ssb_devices_register(struct s
- case SSB_BUSTYPE_SSB:
- dev->dma_mask = &dev->coherent_dma_mask;
- break;
-+ default:
-+ break;
- }
-
- sdev->dev = dev;
-@@ -1359,8 +1361,10 @@ static int __init ssb_modinit(void)
- ssb_buses_lock();
- err = ssb_attach_queued_buses();
- ssb_buses_unlock();
-- if (err)
-+ if (err) {
- bus_unregister(&ssb_bustype);
-+ goto out;
-+ }
-
- err = b43_pci_ssb_bridge_init();
- if (err) {
-@@ -1376,7 +1380,7 @@ static int __init ssb_modinit(void)
- /* don't fail SSB init because of this */
- err = 0;
- }
--
-+out:
- return err;
- }
- /* ssb must be initialized after PCI but before the ssb drivers.
---- a/drivers/ssb/pci.c
-+++ b/drivers/ssb/pci.c
-@@ -169,8 +169,14 @@ err_pci:
- /* Get the word-offset for a SSB_SPROM_XXX define. */
- #define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16))
- /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */
--#define SPEX(_outvar, _offset, _mask, _shift) \
-+#define SPEX16(_outvar, _offset, _mask, _shift) \
- out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift))
-+#define SPEX32(_outvar, _offset, _mask, _shift) \
-+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \
-+ in[SPOFF(_offset)]) & (_mask)) >> (_shift))
-+#define SPEX(_outvar, _offset, _mask, _shift) \
-+ SPEX16(_outvar, _offset, _mask, _shift)
-+
-
- static inline u8 ssb_crc8(u8 crc, u8 data)
- {
-@@ -327,11 +333,9 @@ static void sprom_extract_r123(struct ss
- s8 gain;
- u16 loc[3];
-
-- if (out->revision == 3) { /* rev 3 moved MAC */
-+ if (out->revision == 3) /* rev 3 moved MAC */
- loc[0] = SSB_SPROM3_IL0MAC;
-- loc[1] = SSB_SPROM3_ET0MAC;
-- loc[2] = SSB_SPROM3_ET1MAC;
-- } else {
-+ else {
- loc[0] = SSB_SPROM1_IL0MAC;
- loc[1] = SSB_SPROM1_ET0MAC;
- loc[2] = SSB_SPROM1_ET1MAC;
-@@ -340,13 +344,15 @@ static void sprom_extract_r123(struct ss
- v = in[SPOFF(loc[0]) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(loc[1]) + i];
-- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
-- }
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(loc[2]) + i];
-- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
-+ if (out->revision < 3) { /* only rev 1-2 have et0, et1 */
-+ for (i = 0; i < 3; i++) {
-+ v = in[SPOFF(loc[1]) + i];
-+ *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
-+ }
-+ for (i = 0; i < 3; i++) {
-+ v = in[SPOFF(loc[2]) + i];
-+ *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
-+ }
- }
- SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
- SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
-@@ -399,30 +405,33 @@ static void sprom_extract_r123(struct ss
- out->antenna_gain.ghz5.a3 = gain;
- }
-
--static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in)
-+static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in)
- {
- int i;
- u16 v;
-+ u16 il0mac_offset;
-
-- /* extract the equivalent of the r1 variables */
-+ if (out->revision == 4)
-+ il0mac_offset = SSB_SPROM4_IL0MAC;
-+ else
-+ il0mac_offset = SSB_SPROM5_IL0MAC;
-+ /* extract the MAC address */
- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(SSB_SPROM4_IL0MAC) + i];
-+ v = in[SPOFF(il0mac_offset) + i];
- *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
- }
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(SSB_SPROM4_ET0MAC) + i];
-- *(((__be16 *)out->et0mac) + i) = cpu_to_be16(v);
-- }
-- for (i = 0; i < 3; i++) {
-- v = in[SPOFF(SSB_SPROM4_ET1MAC) + i];
-- *(((__be16 *)out->et1mac) + i) = cpu_to_be16(v);
-- }
- SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0);
- SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A,
- SSB_SPROM4_ETHPHY_ET1A_SHIFT);
-- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
-- SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-- SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+ if (out->revision == 4) {
-+ SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
-+ SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
-+ SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0);
-+ } else {
-+ SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0);
-+ SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0);
-+ SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0);
-+ }
- SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
- SSB_SPROM4_ANTAVAIL_A_SHIFT);
- SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
-@@ -433,12 +442,21 @@ static void sprom_extract_r4(struct ssb_
- SPEX(maxpwr_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_MAXP_A_MASK, 0);
- SPEX(itssi_a, SSB_SPROM4_MAXP_A, SSB_SPROM4_ITSSI_A,
- SSB_SPROM4_ITSSI_A_SHIFT);
-- SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-- SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-- SSB_SPROM4_GPIOA_P1_SHIFT);
-- SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-- SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-- SSB_SPROM4_GPIOB_P3_SHIFT);
-+ if (out->revision == 4) {
-+ SPEX(gpio0, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P0, 0);
-+ SPEX(gpio1, SSB_SPROM4_GPIOA, SSB_SPROM4_GPIOA_P1,
-+ SSB_SPROM4_GPIOA_P1_SHIFT);
-+ SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
-+ SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
-+ SSB_SPROM4_GPIOB_P3_SHIFT);
-+ } else {
-+ SPEX(gpio0, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P0, 0);
-+ SPEX(gpio1, SSB_SPROM5_GPIOA, SSB_SPROM5_GPIOA_P1,
-+ SSB_SPROM5_GPIOA_P1_SHIFT);
-+ SPEX(gpio2, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P2, 0);
-+ SPEX(gpio3, SSB_SPROM5_GPIOB, SSB_SPROM5_GPIOB_P3,
-+ SSB_SPROM5_GPIOB_P3_SHIFT);
-+ }
-
- /* Extract the antenna gain values. */
- SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
-@@ -455,6 +473,96 @@ static void sprom_extract_r4(struct ssb_
- /* TODO - get remaining rev 4 stuff needed */
- }
-
-+static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in)
-+{
-+ int i;
-+ u16 v;
-+
-+ /* extract the MAC address */
-+ for (i = 0; i < 3; i++) {
-+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i];
-+ *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v);
-+ }
-+ SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0);
-+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0);
-+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0);
-+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0);
-+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0);
-+ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A,
-+ SSB_SPROM8_ANTAVAIL_A_SHIFT);
-+ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG,
-+ SSB_SPROM8_ANTAVAIL_BG_SHIFT);
-+ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0);
-+ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG,
-+ SSB_SPROM8_ITSSI_BG_SHIFT);
-+ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0);
-+ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A,
-+ SSB_SPROM8_ITSSI_A_SHIFT);
-+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0);
-+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK,
-+ SSB_SPROM8_MAXP_AL_SHIFT);
-+ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0);
-+ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1,
-+ SSB_SPROM8_GPIOA_P1_SHIFT);
-+ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0);
-+ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3,
-+ SSB_SPROM8_GPIOB_P3_SHIFT);
-+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0);
-+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G,
-+ SSB_SPROM8_TRI5G_SHIFT);
-+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0);
-+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH,
-+ SSB_SPROM8_TRI5GH_SHIFT);
-+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0);
-+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G,
-+ SSB_SPROM8_RXPO5G_SHIFT);
-+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0);
-+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G,
-+ SSB_SPROM8_RSSISMC2G_SHIFT);
-+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G,
-+ SSB_SPROM8_RSSISAV2G_SHIFT);
-+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G,
-+ SSB_SPROM8_BXA2G_SHIFT);
-+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0);
-+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G,
-+ SSB_SPROM8_RSSISMC5G_SHIFT);
-+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G,
-+ SSB_SPROM8_RSSISAV5G_SHIFT);
-+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G,
-+ SSB_SPROM8_BXA5G_SHIFT);
-+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0);
-+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0);
-+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0);
-+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0);
-+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0);
-+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0);
-+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0);
-+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0);
-+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0);
-+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0);
-+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0);
-+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0);
-+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0);
-+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0);
-+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0);
-+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0);
-+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0);
-+
-+ /* Extract the antenna gain values. */
-+ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01,
-+ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT);
-+ SPEX(antenna_gain.ghz24.a1, SSB_SPROM8_AGAIN01,
-+ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT);
-+ SPEX(antenna_gain.ghz24.a2, SSB_SPROM8_AGAIN23,
-+ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT);
-+ SPEX(antenna_gain.ghz24.a3, SSB_SPROM8_AGAIN23,
-+ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT);
-+ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
-+ sizeof(out->antenna_gain.ghz5));
-+
-+ /* TODO - get remaining rev 8 stuff needed */
-+}
-+
- static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
- const u16 *in, u16 size)
- {
-@@ -462,6 +570,8 @@ static int sprom_extract(struct ssb_bus
-
- out->revision = in[size - 1] & 0x00FF;
- ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
-+ memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */
-+ memset(out->et1mac, 0xFF, 6);
- if ((bus->chip_id & 0xFF00) == 0x4400) {
- /* Workaround: The BCM44XX chip has a stupid revision
- * number stored in the SPROM.
-@@ -471,17 +581,28 @@ static int sprom_extract(struct ssb_bus
- } else if (bus->chip_id == 0x4321) {
- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */
- out->revision = 4;
-- sprom_extract_r4(out, in);
-+ sprom_extract_r45(out, in);
- } else {
-- if (out->revision == 0)
-- goto unsupported;
-- if (out->revision >= 1 && out->revision <= 3) {
-+ switch (out->revision) {
-+ case 1:
-+ case 2:
-+ case 3:
-+ sprom_extract_r123(out, in);
-+ break;
-+ case 4:
-+ case 5:
-+ sprom_extract_r45(out, in);
-+ break;
-+ case 8:
-+ sprom_extract_r8(out, in);
-+ break;
-+ default:
-+ ssb_printk(KERN_WARNING PFX "Unsupported SPROM"
-+ " revision %d detected. Will extract"
-+ " v1\n", out->revision);
-+ out->revision = 1;
- sprom_extract_r123(out, in);
- }
-- if (out->revision == 4)
-- sprom_extract_r4(out, in);
-- if (out->revision >= 5)
-- goto unsupported;
- }
-
- if (out->boardflags_lo == 0xFFFF)
-@@ -490,11 +611,6 @@ static int sprom_extract(struct ssb_bus
- out->boardflags_hi = 0; /* per specs */
-
- return 0;
--unsupported:
-- ssb_printk(KERN_WARNING PFX "Unsupported SPROM revision %d "
-- "detected. Will extract v1\n", out->revision);
-- sprom_extract_r123(out, in);
-- return 0;
- }
-
- static int ssb_pci_sprom_get(struct ssb_bus *bus,
---- a/drivers/ssb/pcmcia.c
-+++ b/drivers/ssb/pcmcia.c
-@@ -80,7 +80,7 @@ static int ssb_pcmcia_cfg_write(struct s
- reg.Action = CS_WRITE;
- reg.Value = value;
- res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
-- if (unlikely(res != CS_SUCCESS))
-+ if (unlikely(res != 0))
- return -EBUSY;
-
- return 0;
-@@ -96,7 +96,7 @@ static int ssb_pcmcia_cfg_read(struct ss
- reg.Offset = offset;
- reg.Action = CS_READ;
- res = pcmcia_access_configuration_register(bus->host_pcmcia, &reg);
-- if (unlikely(res != CS_SUCCESS))
-+ if (unlikely(res != 0))
- return -EBUSY;
- *value = reg.Value;
-
-@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st
- ssb_printk(".");
- err = ssb_pcmcia_sprom_write(bus, i, sprom[i]);
- if (err) {
-- ssb_printk("\n" KERN_NOTICE PFX
-+ ssb_printk(KERN_NOTICE PFX
- "Failed to write to SPROM.\n");
- failed = 1;
- break;
-@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st
- }
- err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS);
- if (err) {
-- ssb_printk("\n" KERN_NOTICE PFX
-+ ssb_printk(KERN_NOTICE PFX
- "Could not disable SPROM write access.\n");
- failed = 1;
- }
-@@ -638,17 +638,17 @@ int ssb_pcmcia_get_invariants(struct ssb
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl");
-+ GOTO_ERROR_ON(res != 0, "MAC first tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC first tpl data");
-+ GOTO_ERROR_ON(res != 0, "MAC first tpl data");
- while (1) {
- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1");
- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID)
- break;
- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl");
-+ GOTO_ERROR_ON(res != 0, "MAC next tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "MAC next tpl data");
-+ GOTO_ERROR_ON(res != 0, "MAC next tpl data");
- }
- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size");
- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN);
-@@ -659,9 +659,9 @@ int ssb_pcmcia_get_invariants(struct ssb
- tuple.TupleData = buf;
- tuple.TupleDataMax = sizeof(buf);
- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl");
-+ GOTO_ERROR_ON(res != 0, "VEN first tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN first tpl data");
-+ GOTO_ERROR_ON(res != 0, "VEN first tpl data");
- while (1) {
- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1");
- switch (tuple.TupleData[0]) {
-@@ -678,7 +678,8 @@ int ssb_pcmcia_get_invariants(struct ssb
- sprom->board_rev = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_PA:
-- GOTO_ERROR_ON(tuple.TupleDataLen != 9,
-+ GOTO_ERROR_ON((tuple.TupleDataLen != 9) &&
-+ (tuple.TupleDataLen != 10),
- "pa tpl size");
- sprom->pa0b0 = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
-@@ -718,7 +719,8 @@ int ssb_pcmcia_get_invariants(struct ssb
- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1];
- break;
- case SSB_PCMCIA_CIS_BFLAGS:
-- GOTO_ERROR_ON(tuple.TupleDataLen != 3,
-+ GOTO_ERROR_ON((tuple.TupleDataLen != 3) &&
-+ (tuple.TupleDataLen != 5),
- "bfl tpl size");
- sprom->boardflags_lo = tuple.TupleData[1] |
- ((u16)tuple.TupleData[2] << 8);
-@@ -733,11 +735,11 @@ int ssb_pcmcia_get_invariants(struct ssb
- break;
- }
- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple);
-- if (res == CS_NO_MORE_ITEMS)
-+ if (res == -ENOSPC)
- break;
-- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl");
-+ GOTO_ERROR_ON(res != 0, "VEN next tpl");
- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple);
-- GOTO_ERROR_ON(res != CS_SUCCESS, "VEN next tpl data");
-+ GOTO_ERROR_ON(res != 0, "VEN next tpl data");
- }
-
- return 0;
---- a/drivers/ssb/scan.c
-+++ b/drivers/ssb/scan.c
-@@ -175,6 +175,8 @@ static u32 scan_read32(struct ssb_bus *b
- } else
- ssb_pcmcia_switch_segment(bus, 0);
- break;
-+ default:
-+ break;
- }
- return readl(bus->mmio + offset);
- }
-@@ -188,6 +190,8 @@ static int scan_switchcore(struct ssb_bu
- return ssb_pci_switch_coreidx(bus, coreidx);
- case SSB_BUSTYPE_PCMCIA:
- return ssb_pcmcia_switch_coreidx(bus, coreidx);
-+ default:
-+ break;
- }
- return 0;
- }
-@@ -206,6 +210,8 @@ void ssb_iounmap(struct ssb_bus *bus)
- SSB_BUG_ON(1); /* Can't reach this code. */
- #endif
- break;
-+ default:
-+ break;
- }
- bus->mmio = NULL;
- bus->mapped_device = NULL;
-@@ -230,6 +236,8 @@ static void __iomem *ssb_ioremap(struct
- SSB_BUG_ON(1); /* Can't reach this code. */
- #endif
- break;
-+ default:
-+ break;
- }
-
- return mmio;
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -27,24 +27,54 @@ struct ssb_sprom {
- u8 et1mdcport; /* MDIO for enet1 */
- u8 board_rev; /* Board revision number from SPROM. */
- u8 country_code; /* Country Code */
-- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
-- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
-+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */
-+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */
- u16 pa0b0;
- u16 pa0b1;
- u16 pa0b2;
- u16 pa1b0;
- u16 pa1b1;
- u16 pa1b2;
-+ u16 pa1lob0;
-+ u16 pa1lob1;
-+ u16 pa1lob2;
-+ u16 pa1hib0;
-+ u16 pa1hib1;
-+ u16 pa1hib2;
- u8 gpio0; /* GPIO pin 0 */
- u8 gpio1; /* GPIO pin 1 */
- u8 gpio2; /* GPIO pin 2 */
- u8 gpio3; /* GPIO pin 3 */
-- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */
-- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */
-+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */
-+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */
-+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */
-+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */
- u8 itssi_a; /* Idle TSSI Target for A-PHY */
- u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
-- u16 boardflags_lo; /* Boardflags (low 16 bits) */
-- u16 boardflags_hi; /* Boardflags (high 16 bits) */
-+ u8 tri2g; /* 2.4GHz TX isolation */
-+ u8 tri5gl; /* 5.2GHz TX isolation */
-+ u8 tri5g; /* 5.3GHz TX isolation */
-+ u8 tri5gh; /* 5.8GHz TX isolation */
-+ u8 rxpo2g; /* 2GHz RX power offset */
-+ u8 rxpo5g; /* 5GHz RX power offset */
-+ u8 rssisav2g; /* 2GHz RSSI params */
-+ u8 rssismc2g;
-+ u8 rssismf2g;
-+ u8 bxa2g; /* 2GHz BX arch */
-+ u8 rssisav5g; /* 5GHz RSSI params */
-+ u8 rssismc5g;
-+ u8 rssismf5g;
-+ u8 bxa5g; /* 5GHz BX arch */
-+ u16 cck2gpo; /* CCK power offset */
-+ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */
-+ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */
-+ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */
-+ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */
-+ u16 boardflags_lo; /* Board flags (bits 0-15) */
-+ u16 boardflags_hi; /* Board flags (bits 16-31) */
-+ u16 boardflags2_lo; /* Board flags (bits 32-47) */
-+ u16 boardflags2_hi; /* Board flags (bits 48-63) */
-+ /* TODO store board flags in a single u64 */
-
- /* Antenna gain values for up to 4 antennas
- * on each band. Values in dBm/4 (Q5.2). Negative gain means the
-@@ -58,7 +88,7 @@ struct ssb_sprom {
- } ghz5; /* 5GHz band */
- } antenna_gain;
-
-- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
-+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */
- };
-
- /* Information about the PCB the circuitry is soldered on. */
-@@ -208,6 +238,7 @@ enum ssb_bustype {
- SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */
- SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */
- SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */
-+ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */
- };
-
- /* board_vendor */
-@@ -240,8 +271,12 @@ struct ssb_bus {
-
- /* The core in the basic address register window. (PCI bus only) */
- struct ssb_device *mapped_device;
-- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-- u8 mapped_pcmcia_seg;
-+ union {
-+ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
-+ u8 mapped_pcmcia_seg;
-+ /* Current SSB base address window for SDIO. */
-+ u32 sdio_sbaddr;
-+ };
- /* Lock for core and segment switching.
- * On PCMCIA-host busses this is used to protect the whole MMIO access. */
- spinlock_t bar_lock;
-@@ -252,6 +287,11 @@ struct ssb_bus {
- struct pci_dev *host_pci;
- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
- struct pcmcia_device *host_pcmcia;
-+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
-+ struct sdio_func *host_sdio;
-+
-+ /* See enum ssb_quirks */
-+ unsigned int quirks;
-
- #ifdef CONFIG_SSB_SPROM
- /* Mutex to protect the SPROM writing. */
-@@ -306,6 +346,11 @@ struct ssb_bus {
- #endif /* DEBUG */
- };
-
-+enum ssb_quirks {
-+ /* SDIO connected card requires performing a read after writing a 32-bit value */
-+ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0),
-+};
-+
- /* The initialization-invariants. */
- struct ssb_init_invariants {
- /* Versioning information about the PCB. */
-@@ -431,12 +476,16 @@ static inline int ssb_dma_mapping_error(
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- return pci_dma_mapping_error(dev->bus->host_pci, addr);
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- return dma_mapping_error(dev->dev, addr);
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- return -ENOSYS;
- }
-
-@@ -445,12 +494,16 @@ static inline dma_addr_t ssb_dma_map_sin
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- return pci_map_single(dev->bus->host_pci, p, size, dir);
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- return dma_map_single(dev->dev, p, size, dir);
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- return 0;
- }
-
-@@ -459,14 +512,18 @@ static inline void ssb_dma_unmap_single(
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- pci_unmap_single(dev->bus->host_pci, dma_addr, size, dir);
- return;
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- dma_unmap_single(dev->dev, dma_addr, size, dir);
- return;
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- }
-
- static inline void ssb_dma_sync_single_for_cpu(struct ssb_device *dev,
-@@ -476,15 +533,19 @@ static inline void ssb_dma_sync_single_f
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
- size, dir);
- return;
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_for_cpu(dev->dev, dma_addr, size, dir);
- return;
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- }
-
- static inline void ssb_dma_sync_single_for_device(struct ssb_device *dev,
-@@ -494,15 +555,19 @@ static inline void ssb_dma_sync_single_f
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
- size, dir);
- return;
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_for_device(dev->dev, dma_addr, size, dir);
- return;
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- }
-
- static inline void ssb_dma_sync_single_range_for_cpu(struct ssb_device *dev,
-@@ -513,17 +578,21 @@ static inline void ssb_dma_sync_single_r
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- /* Just sync everything. That's all the PCI API can do. */
- pci_dma_sync_single_for_cpu(dev->bus->host_pci, dma_addr,
- offset + size, dir);
- return;
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_range_for_cpu(dev->dev, dma_addr, offset,
- size, dir);
- return;
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- }
-
- static inline void ssb_dma_sync_single_range_for_device(struct ssb_device *dev,
-@@ -534,17 +603,21 @@ static inline void ssb_dma_sync_single_r
- {
- switch (dev->bus->bustype) {
- case SSB_BUSTYPE_PCI:
-+#ifdef CONFIG_SSB_PCIHOST
- /* Just sync everything. That's all the PCI API can do. */
- pci_dma_sync_single_for_device(dev->bus->host_pci, dma_addr,
- offset + size, dir);
- return;
-+#endif
-+ break;
- case SSB_BUSTYPE_SSB:
- dma_sync_single_range_for_device(dev->dev, dma_addr, offset,
- size, dir);
- return;
- default:
-- __ssb_dma_not_implemented(dev);
-+ break;
- }
-+ __ssb_dma_not_implemented(dev);
- }
-
-
---- a/include/linux/ssb/ssb_driver_chipcommon.h
-+++ b/include/linux/ssb/ssb_driver_chipcommon.h
-@@ -181,6 +181,16 @@
- #define SSB_CHIPCO_PROG_WAITCNT 0x0124
- #define SSB_CHIPCO_FLASH_CFG 0x0128
- #define SSB_CHIPCO_FLASH_WAITCNT 0x012C
-+#define SSB_CHIPCO_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */
-+#define SSB_CHIPCO_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
-+#define SSB_CHIPCO_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
-+#define SSB_CHIPCO_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
-+#define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
-+#define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
-+#define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
-+#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */
-+#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */
-+#define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */
- #define SSB_CHIPCO_UART0_DATA 0x0300
- #define SSB_CHIPCO_UART0_IMR 0x0304
- #define SSB_CHIPCO_UART0_FCR 0x0308
-@@ -197,6 +207,196 @@
- #define SSB_CHIPCO_UART1_LSR 0x0414
- #define SSB_CHIPCO_UART1_MSR 0x0418
- #define SSB_CHIPCO_UART1_SCRATCH 0x041C
-+/* PMU registers (rev >= 20) */
-+#define SSB_CHIPCO_PMU_CTL 0x0600 /* PMU control */
-+#define SSB_CHIPCO_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */
-+#define SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT 16
-+#define SSB_CHIPCO_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */
-+#define SSB_CHIPCO_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */
-+#define SSB_CHIPCO_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */
-+#define SSB_CHIPCO_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */
-+#define SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT 2
-+#define SSB_CHIPCO_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */
-+#define SSB_CHIPCO_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */
-+#define SSB_CHIPCO_PMU_CAP 0x0604 /* PMU capabilities */
-+#define SSB_CHIPCO_PMU_CAP_REVISION 0x000000FF /* Revision mask */
-+#define SSB_CHIPCO_PMU_STAT 0x0608 /* PMU status */
-+#define SSB_CHIPCO_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */
-+#define SSB_CHIPCO_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */
-+#define SSB_CHIPCO_PMU_STAT_HAVEALP 0x00000008 /* ALP available */
-+#define SSB_CHIPCO_PMU_STAT_HAVEHT 0x00000004 /* HT available */
-+#define SSB_CHIPCO_PMU_STAT_RESINIT 0x00000003 /* Res init */
-+#define SSB_CHIPCO_PMU_RES_STAT 0x060C /* PMU res status */
-+#define SSB_CHIPCO_PMU_RES_PEND 0x0610 /* PMU res pending */
-+#define SSB_CHIPCO_PMU_TIMER 0x0614 /* PMU timer */
-+#define SSB_CHIPCO_PMU_MINRES_MSK 0x0618 /* PMU min res mask */
-+#define SSB_CHIPCO_PMU_MAXRES_MSK 0x061C /* PMU max res mask */
-+#define SSB_CHIPCO_PMU_RES_TABSEL 0x0620 /* PMU res table sel */
-+#define SSB_CHIPCO_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */
-+#define SSB_CHIPCO_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */
-+#define SSB_CHIPCO_PMU_RES_TIMER 0x062C /* PMU res timer */
-+#define SSB_CHIPCO_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */
-+#define SSB_CHIPCO_PMU_WATCHDOG 0x0634 /* PMU watchdog */
-+#define SSB_CHIPCO_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */
-+#define SSB_CHIPCO_PMU_RES_REQT 0x0644 /* PMU res req timer */
-+#define SSB_CHIPCO_PMU_RES_REQM 0x0648 /* PMU res req mask */
-+#define SSB_CHIPCO_CHIPCTL_ADDR 0x0650
-+#define SSB_CHIPCO_CHIPCTL_DATA 0x0654
-+#define SSB_CHIPCO_REGCTL_ADDR 0x0658
-+#define SSB_CHIPCO_REGCTL_DATA 0x065C
-+#define SSB_CHIPCO_PLLCTL_ADDR 0x0660
-+#define SSB_CHIPCO_PLLCTL_DATA 0x0664
-+
-+
-+
-+/** PMU PLL registers */
-+
-+/* PMU rev 0 PLL registers */
-+#define SSB_PMU0_PLLCTL0 0
-+#define SSB_PMU0_PLLCTL0_PDIV_MSK 0x00000001
-+#define SSB_PMU0_PLLCTL0_PDIV_FREQ 25000 /* kHz */
-+#define SSB_PMU0_PLLCTL1 1
-+#define SSB_PMU0_PLLCTL1_WILD_IMSK 0xF0000000 /* Wild int mask (low nibble) */
-+#define SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT 28
-+#define SSB_PMU0_PLLCTL1_WILD_FMSK 0x0FFFFF00 /* Wild frac mask */
-+#define SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT 8
-+#define SSB_PMU0_PLLCTL1_STOPMOD 0x00000040 /* Stop mod */
-+#define SSB_PMU0_PLLCTL2 2
-+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI 0x0000000F /* Wild int mask (high nibble) */
-+#define SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT 0
-+
-+/* PMU rev 1 PLL registers */
-+#define SSB_PMU1_PLLCTL0 0
-+#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */
-+#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20
-+#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */
-+#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24
-+#define SSB_PMU1_PLLCTL1 1
-+#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */
-+#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0
-+#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */
-+#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8
-+#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */
-+#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16
-+#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */
-+#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24
-+#define SSB_PMU1_PLLCTL2 2
-+#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */
-+#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0
-+#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */
-+#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8
-+#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */
-+#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17
-+#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */
-+#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20
-+#define SSB_PMU1_PLLCTL3 3
-+#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */
-+#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0
-+#define SSB_PMU1_PLLCTL4 4
-+#define SSB_PMU1_PLLCTL5 5
-+#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */
-+#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8
-+
-+/* BCM4312 PLL resource numbers. */
-+#define SSB_PMURES_4312_SWITCHER_BURST 0
-+#define SSB_PMURES_4312_SWITCHER_PWM 1
-+#define SSB_PMURES_4312_PA_REF_LDO 2
-+#define SSB_PMURES_4312_CORE_LDO_BURST 3
-+#define SSB_PMURES_4312_CORE_LDO_PWM 4
-+#define SSB_PMURES_4312_RADIO_LDO 5
-+#define SSB_PMURES_4312_ILP_REQUEST 6
-+#define SSB_PMURES_4312_BG_FILTBYP 7
-+#define SSB_PMURES_4312_TX_FILTBYP 8
-+#define SSB_PMURES_4312_RX_FILTBYP 9
-+#define SSB_PMURES_4312_XTAL_PU 10
-+#define SSB_PMURES_4312_ALP_AVAIL 11
-+#define SSB_PMURES_4312_BB_PLL_FILTBYP 12
-+#define SSB_PMURES_4312_RF_PLL_FILTBYP 13
-+#define SSB_PMURES_4312_HT_AVAIL 14
-+
-+/* BCM4325 PLL resource numbers. */
-+#define SSB_PMURES_4325_BUCK_BOOST_BURST 0
-+#define SSB_PMURES_4325_CBUCK_BURST 1
-+#define SSB_PMURES_4325_CBUCK_PWM 2
-+#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3
-+#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4
-+#define SSB_PMURES_4325_BUCK_BOOST_PWM 5
-+#define SSB_PMURES_4325_ILP_REQUEST 6
-+#define SSB_PMURES_4325_ABUCK_BURST 7
-+#define SSB_PMURES_4325_ABUCK_PWM 8
-+#define SSB_PMURES_4325_LNLDO1_PU 9
-+#define SSB_PMURES_4325_LNLDO2_PU 10
-+#define SSB_PMURES_4325_LNLDO3_PU 11
-+#define SSB_PMURES_4325_LNLDO4_PU 12
-+#define SSB_PMURES_4325_XTAL_PU 13
-+#define SSB_PMURES_4325_ALP_AVAIL 14
-+#define SSB_PMURES_4325_RX_PWRSW_PU 15
-+#define SSB_PMURES_4325_TX_PWRSW_PU 16
-+#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17
-+#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18
-+#define SSB_PMURES_4325_AFE_PWRSW_PU 19
-+#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20
-+#define SSB_PMURES_4325_HT_AVAIL 21
-+
-+/* BCM4328 PLL resource numbers. */
-+#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0
-+#define SSB_PMURES_4328_BB_SWITCHER_PWM 1
-+#define SSB_PMURES_4328_BB_SWITCHER_BURST 2
-+#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3
-+#define SSB_PMURES_4328_ILP_REQUEST 4
-+#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5
-+#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6
-+#define SSB_PMURES_4328_ROM_SWITCH 7
-+#define SSB_PMURES_4328_PA_REF_LDO 8
-+#define SSB_PMURES_4328_RADIO_LDO 9
-+#define SSB_PMURES_4328_AFE_LDO 10
-+#define SSB_PMURES_4328_PLL_LDO 11
-+#define SSB_PMURES_4328_BG_FILTBYP 12
-+#define SSB_PMURES_4328_TX_FILTBYP 13
-+#define SSB_PMURES_4328_RX_FILTBYP 14
-+#define SSB_PMURES_4328_XTAL_PU 15
-+#define SSB_PMURES_4328_XTAL_EN 16
-+#define SSB_PMURES_4328_BB_PLL_FILTBYP 17
-+#define SSB_PMURES_4328_RF_PLL_FILTBYP 18
-+#define SSB_PMURES_4328_BB_PLL_PU 19
-+
-+/* BCM5354 PLL resource numbers. */
-+#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0
-+#define SSB_PMURES_5354_BB_SWITCHER_PWM 1
-+#define SSB_PMURES_5354_BB_SWITCHER_BURST 2
-+#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3
-+#define SSB_PMURES_5354_ILP_REQUEST 4
-+#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5
-+#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6
-+#define SSB_PMURES_5354_ROM_SWITCH 7
-+#define SSB_PMURES_5354_PA_REF_LDO 8
-+#define SSB_PMURES_5354_RADIO_LDO 9
-+#define SSB_PMURES_5354_AFE_LDO 10
-+#define SSB_PMURES_5354_PLL_LDO 11
-+#define SSB_PMURES_5354_BG_FILTBYP 12
-+#define SSB_PMURES_5354_TX_FILTBYP 13
-+#define SSB_PMURES_5354_RX_FILTBYP 14
-+#define SSB_PMURES_5354_XTAL_PU 15
-+#define SSB_PMURES_5354_XTAL_EN 16
-+#define SSB_PMURES_5354_BB_PLL_FILTBYP 17
-+#define SSB_PMURES_5354_RF_PLL_FILTBYP 18
-+#define SSB_PMURES_5354_BB_PLL_PU 19
-+
-+
-+
-+/** Chip specific Chip-Status register contents. */
-+#define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003
-+#define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */
-+#define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */
-+#define SSB_CHIPCO_CHST_4325_OTP_SEL 2 /* OTP is powered up, no SPROM */
-+#define SSB_CHIPCO_CHST_4325_OTP_PWRDN 3 /* OTP is powered down, SPROM is present */
-+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE 0x00000004
-+#define SSB_CHIPCO_CHST_4325_SDIO_USB_MODE_SHIFT 2
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALID 0x00000008
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALID_SHIFT 3
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE 0x000001F0
-+#define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4
-+#define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */
-
-
-
-@@ -353,11 +553,20 @@
- struct ssb_device;
- struct ssb_serial_port;
-
-+/* Data for the PMU, if available.
-+ * Check availability with ((struct ssb_chipcommon)->capabilities & SSB_CHIPCO_CAP_PMU)
-+ */
-+struct ssb_chipcommon_pmu {
-+ u8 rev; /* PMU revision */
-+ u32 crystalfreq; /* The active crystal frequency (in kHz) */
-+};
-+
- struct ssb_chipcommon {
- struct ssb_device *dev;
- u32 capabilities;
- /* Fast Powerup Delay constant */
- u16 fast_pwrup_delay;
-+ struct ssb_chipcommon_pmu pmu;
- };
-
- static inline bool ssb_chipco_available(struct ssb_chipcommon *cc)
-@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available(
- return (cc->dev != NULL);
- }
-
-+/* Register access */
-+#define chipco_read32(cc, offset) ssb_read32((cc)->dev, offset)
-+#define chipco_write32(cc, offset, val) ssb_write32((cc)->dev, offset, val)
-+
-+#define chipco_mask32(cc, offset, mask) \
-+ chipco_write32(cc, offset, chipco_read32(cc, offset) & (mask))
-+#define chipco_set32(cc, offset, set) \
-+ chipco_write32(cc, offset, chipco_read32(cc, offset) | (set))
-+#define chipco_maskset32(cc, offset, mask, set) \
-+ chipco_write32(cc, offset, (chipco_read32(cc, offset) & (mask)) | (set))
-+
- extern void ssb_chipcommon_init(struct ssb_chipcommon *cc);
-
- extern void ssb_chipco_suspend(struct ssb_chipcommon *cc);
-@@ -406,4 +626,18 @@ extern int ssb_chipco_serial_init(struct
- struct ssb_serial_port *ports);
- #endif /* CONFIG_SSB_SERIAL */
-
-+/* PMU support */
-+extern void ssb_pmu_init(struct ssb_chipcommon *cc);
-+
-+enum ssb_pmu_ldo_volt_id {
-+ LDO_PAREF = 0,
-+ LDO_VOLT1,
-+ LDO_VOLT2,
-+ LDO_VOLT3,
-+};
-+
-+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
-+ enum ssb_pmu_ldo_volt_id id, u32 voltage);
-+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on);
-+
- #endif /* LINUX_SSB_CHIPCO_H_ */
---- a/include/linux/ssb/ssb_regs.h
-+++ b/include/linux/ssb/ssb_regs.h
-@@ -162,7 +162,7 @@
-
- /* SPROM shadow area. If not otherwise noted, fields are
- * two bytes wide. Note that the SPROM can _only_ be read
-- * in two-byte quantinies.
-+ * in two-byte quantities.
- */
- #define SSB_SPROMSIZE_WORDS 64
- #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16))
-@@ -245,8 +245,6 @@
-
- /* SPROM Revision 3 (inherits most data from rev 2) */
- #define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */
--#define SSB_SPROM3_ET0MAC 0x1050 /* 6 bytes MAC address for Ethernet ?? */
--#define SSB_SPROM3_ET1MAC 0x1050 /* 6 bytes MAC address for 802.11a ?? */
- #define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */
- #define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */
- #define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */
-@@ -267,8 +265,6 @@
-
- /* SPROM Revision 4 */
- #define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
--#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */
--#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */
- #define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */
- #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */
- #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */
-@@ -316,6 +312,109 @@
- #define SSB_SPROM4_PA1B1 0x1090
- #define SSB_SPROM4_PA1B2 0x1092
-
-+/* SPROM Revision 5 (inherits most data from rev 4) */
-+#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */
-+#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */
-+#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */
-+#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */
-+#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */
-+#define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */
-+#define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */
-+#define SSB_SPROM5_GPIOA_P1_SHIFT 8
-+#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */
-+#define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */
-+#define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */
-+#define SSB_SPROM5_GPIOB_P3_SHIFT 8
-+
-+/* SPROM Revision 8 */
-+#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */
-+#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */
-+#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */
-+#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */
-+#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */
-+#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */
-+#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */
-+#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/
-+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */
-+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8
-+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */
-+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0
-+#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */
-+#define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */
-+#define SSB_SPROM8_AGAIN0_SHIFT 0
-+#define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */
-+#define SSB_SPROM8_AGAIN1_SHIFT 8
-+#define SSB_SPROM8_AGAIN23 0x10A0
-+#define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */
-+#define SSB_SPROM8_AGAIN2_SHIFT 0
-+#define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */
-+#define SSB_SPROM8_AGAIN3_SHIFT 8
-+#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */
-+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */
-+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */
-+#define SSB_SPROM8_GPIOA_P1_SHIFT 8
-+#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */
-+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */
-+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */
-+#define SSB_SPROM8_GPIOB_P3_SHIFT 8
-+#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */
-+#define SSB_SPROM8_RSSISMF2G 0x000F
-+#define SSB_SPROM8_RSSISMC2G 0x00F0
-+#define SSB_SPROM8_RSSISMC2G_SHIFT 4
-+#define SSB_SPROM8_RSSISAV2G 0x0700
-+#define SSB_SPROM8_RSSISAV2G_SHIFT 8
-+#define SSB_SPROM8_BXA2G 0x1800
-+#define SSB_SPROM8_BXA2G_SHIFT 11
-+#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */
-+#define SSB_SPROM8_RSSISMF5G 0x000F
-+#define SSB_SPROM8_RSSISMC5G 0x00F0
-+#define SSB_SPROM8_RSSISMC5G_SHIFT 4
-+#define SSB_SPROM8_RSSISAV5G 0x0700
-+#define SSB_SPROM8_RSSISAV5G_SHIFT 8
-+#define SSB_SPROM8_BXA5G 0x1800
-+#define SSB_SPROM8_BXA5G_SHIFT 11
-+#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */
-+#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */
-+#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */
-+#define SSB_SPROM8_TRI5G_SHIFT 8
-+#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */
-+#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */
-+#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */
-+#define SSB_SPROM8_TRI5GH_SHIFT 8
-+#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */
-+#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */
-+#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */
-+#define SSB_SPROM8_RXPO5G_SHIFT 8
-+#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */
-+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */
-+#define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */
-+#define SSB_SPROM8_ITSSI_BG_SHIFT 8
-+#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */
-+#define SSB_SPROM8_PA0B1 0x10C4
-+#define SSB_SPROM8_PA0B2 0x10C6
-+#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */
-+#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */
-+#define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */
-+#define SSB_SPROM8_ITSSI_A_SHIFT 8
-+#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */
-+#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */
-+#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */
-+#define SSB_SPROM8_MAXP_AL_SHIFT 8
-+#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */
-+#define SSB_SPROM8_PA1B1 0x10CE
-+#define SSB_SPROM8_PA1B2 0x10D0
-+#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */
-+#define SSB_SPROM8_PA1LOB1 0x10D4
-+#define SSB_SPROM8_PA1LOB2 0x10D6
-+#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */
-+#define SSB_SPROM8_PA1HIB1 0x10DA
-+#define SSB_SPROM8_PA1HIB2 0x10DC
-+#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */
-+#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */
-+#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */
-+#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */
-+#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */
-+
- /* Values for SSB_SPROM1_BINF_CCODE */
- enum {
- SSB_SPROM1CCODE_WORLD = 0,
---- /dev/null
-+++ b/drivers/ssb/driver_chipcommon_pmu.c
-@@ -0,0 +1,602 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom ChipCommon Power Management Unit driver
-+ *
-+ * Copyright 2009, Michael Buesch <mb@bu3sch.de>
-+ * Copyright 2007, Broadcom Corporation
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_regs.h>
-+#include <linux/ssb/ssb_driver_chipcommon.h>
-+#include <linux/delay.h>
-+
-+#include "ssb_private.h"
-+
-+static u32 ssb_chipco_pll_read(struct ssb_chipcommon *cc, u32 offset)
-+{
-+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
-+ return chipco_read32(cc, SSB_CHIPCO_PLLCTL_DATA);
-+}
-+
-+static void ssb_chipco_pll_write(struct ssb_chipcommon *cc,
-+ u32 offset, u32 value)
-+{
-+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_ADDR, offset);
-+ chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value);
-+}
-+
-+static void ssb_chipco_regctl_maskset(struct ssb_chipcommon *cc,
-+ u32 offset, u32 mask, u32 set)
-+{
-+ u32 value;
-+
-+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
-+ chipco_write32(cc, SSB_CHIPCO_REGCTL_ADDR, offset);
-+ chipco_read32(cc, SSB_CHIPCO_REGCTL_ADDR);
-+ value = chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
-+ value &= mask;
-+ value |= set;
-+ chipco_write32(cc, SSB_CHIPCO_REGCTL_DATA, value);
-+ chipco_read32(cc, SSB_CHIPCO_REGCTL_DATA);
-+}
-+
-+struct pmu0_plltab_entry {
-+ u16 freq; /* Crystal frequency in kHz.*/
-+ u8 xf; /* Crystal frequency value for PMU control */
-+ u8 wb_int;
-+ u32 wb_frac;
-+};
-+
-+static const struct pmu0_plltab_entry pmu0_plltab[] = {
-+ { .freq = 12000, .xf = 1, .wb_int = 73, .wb_frac = 349525, },
-+ { .freq = 13000, .xf = 2, .wb_int = 67, .wb_frac = 725937, },
-+ { .freq = 14400, .xf = 3, .wb_int = 61, .wb_frac = 116508, },
-+ { .freq = 15360, .xf = 4, .wb_int = 57, .wb_frac = 305834, },
-+ { .freq = 16200, .xf = 5, .wb_int = 54, .wb_frac = 336579, },
-+ { .freq = 16800, .xf = 6, .wb_int = 52, .wb_frac = 399457, },
-+ { .freq = 19200, .xf = 7, .wb_int = 45, .wb_frac = 873813, },
-+ { .freq = 19800, .xf = 8, .wb_int = 44, .wb_frac = 466033, },
-+ { .freq = 20000, .xf = 9, .wb_int = 44, .wb_frac = 0, },
-+ { .freq = 25000, .xf = 10, .wb_int = 70, .wb_frac = 419430, },
-+ { .freq = 26000, .xf = 11, .wb_int = 67, .wb_frac = 725937, },
-+ { .freq = 30000, .xf = 12, .wb_int = 58, .wb_frac = 699050, },
-+ { .freq = 38400, .xf = 13, .wb_int = 45, .wb_frac = 873813, },
-+ { .freq = 40000, .xf = 14, .wb_int = 45, .wb_frac = 0, },
-+};
-+#define SSB_PMU0_DEFAULT_XTALFREQ 20000
-+
-+static const struct pmu0_plltab_entry * pmu0_plltab_find_entry(u32 crystalfreq)
-+{
-+ const struct pmu0_plltab_entry *e;
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(pmu0_plltab); i++) {
-+ e = &pmu0_plltab[i];
-+ if (e->freq == crystalfreq)
-+ return e;
-+ }
-+
-+ return NULL;
-+}
-+
-+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
-+static void ssb_pmu0_pllinit_r0(struct ssb_chipcommon *cc,
-+ u32 crystalfreq)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ const struct pmu0_plltab_entry *e = NULL;
-+ u32 pmuctl, tmp, pllctl;
-+ unsigned int i;
-+
-+ if ((bus->chip_id == 0x5354) && !crystalfreq) {
-+ /* The 5354 crystal freq is 25MHz */
-+ crystalfreq = 25000;
-+ }
-+ if (crystalfreq)
-+ e = pmu0_plltab_find_entry(crystalfreq);
-+ if (!e)
-+ e = pmu0_plltab_find_entry(SSB_PMU0_DEFAULT_XTALFREQ);
-+ BUG_ON(!e);
-+ crystalfreq = e->freq;
-+ cc->pmu.crystalfreq = e->freq;
-+
-+ /* Check if the PLL already is programmed to this frequency. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
-+ /* We're already there... */
-+ return;
-+ }
-+
-+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-+ (crystalfreq / 1000), (crystalfreq % 1000));
-+
-+ /* First turn the PLL off. */
-+ switch (bus->chip_id) {
-+ case 0x4328:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~(1 << SSB_PMURES_4328_BB_PLL_PU));
-+ break;
-+ case 0x5354:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~(1 << SSB_PMURES_5354_BB_PLL_PU));
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ }
-+ for (i = 1500; i; i--) {
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
-+ break;
-+ udelay(10);
-+ }
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+
-+ /* Set PDIV in PLL control 0. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL0);
-+ if (crystalfreq >= SSB_PMU0_PLLCTL0_PDIV_FREQ)
-+ pllctl |= SSB_PMU0_PLLCTL0_PDIV_MSK;
-+ else
-+ pllctl &= ~SSB_PMU0_PLLCTL0_PDIV_MSK;
-+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL0, pllctl);
-+
-+ /* Set WILD in PLL control 1. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL1);
-+ pllctl &= ~SSB_PMU0_PLLCTL1_STOPMOD;
-+ pllctl &= ~(SSB_PMU0_PLLCTL1_WILD_IMSK | SSB_PMU0_PLLCTL1_WILD_FMSK);
-+ pllctl |= ((u32)e->wb_int << SSB_PMU0_PLLCTL1_WILD_IMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_IMSK;
-+ pllctl |= ((u32)e->wb_frac << SSB_PMU0_PLLCTL1_WILD_FMSK_SHIFT) & SSB_PMU0_PLLCTL1_WILD_FMSK;
-+ if (e->wb_frac == 0)
-+ pllctl |= SSB_PMU0_PLLCTL1_STOPMOD;
-+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL1, pllctl);
-+
-+ /* Set WILD in PLL control 2. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU0_PLLCTL2);
-+ pllctl &= ~SSB_PMU0_PLLCTL2_WILD_IMSKHI;
-+ pllctl |= (((u32)e->wb_int >> 4) << SSB_PMU0_PLLCTL2_WILD_IMSKHI_SHIFT) & SSB_PMU0_PLLCTL2_WILD_IMSKHI;
-+ ssb_chipco_pll_write(cc, SSB_PMU0_PLLCTL2, pllctl);
-+
-+ /* Set the crystalfrequency and the divisor. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+ pmuctl |= (((crystalfreq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
-+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+ pmuctl &= ~SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
-+}
-+
-+struct pmu1_plltab_entry {
-+ u16 freq; /* Crystal frequency in kHz.*/
-+ u8 xf; /* Crystal frequency value for PMU control */
-+ u8 ndiv_int;
-+ u32 ndiv_frac;
-+ u8 p1div;
-+ u8 p2div;
-+};
-+
-+static const struct pmu1_plltab_entry pmu1_plltab[] = {
-+ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, },
-+ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, },
-+ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, },
-+ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, },
-+ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, },
-+ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, },
-+ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, },
-+ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, },
-+ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, },
-+ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, },
-+ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, },
-+ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, },
-+ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, },
-+ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, },
-+ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, },
-+};
-+
-+#define SSB_PMU1_DEFAULT_XTALFREQ 15360
-+
-+static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq)
-+{
-+ const struct pmu1_plltab_entry *e;
-+ unsigned int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) {
-+ e = &pmu1_plltab[i];
-+ if (e->freq == crystalfreq)
-+ return e;
-+ }
-+
-+ return NULL;
-+}
-+
-+/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */
-+static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc,
-+ u32 crystalfreq)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ const struct pmu1_plltab_entry *e = NULL;
-+ u32 buffer_strength = 0;
-+ u32 tmp, pllctl, pmuctl;
-+ unsigned int i;
-+
-+ if (bus->chip_id == 0x4312) {
-+ /* We do not touch the BCM4312 PLL and assume
-+ * the default crystal settings work out-of-the-box. */
-+ cc->pmu.crystalfreq = 20000;
-+ return;
-+ }
-+
-+ if (crystalfreq)
-+ e = pmu1_plltab_find_entry(crystalfreq);
-+ if (!e)
-+ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ);
-+ BUG_ON(!e);
-+ crystalfreq = e->freq;
-+ cc->pmu.crystalfreq = e->freq;
-+
-+ /* Check if the PLL already is programmed to this frequency. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) {
-+ /* We're already there... */
-+ return;
-+ }
-+
-+ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n",
-+ (crystalfreq / 1000), (crystalfreq % 1000));
-+
-+ /* First turn the PLL off. */
-+ switch (bus->chip_id) {
-+ case 0x4325:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK,
-+ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_HT_AVAIL)));
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK,
-+ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_HT_AVAIL)));
-+ /* Adjust the BBPLL to 2 on all channels later. */
-+ buffer_strength = 0x222222;
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ }
-+ for (i = 1500; i; i--) {
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT))
-+ break;
-+ udelay(10);
-+ }
-+ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST);
-+ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)
-+ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n");
-+
-+ /* Set p1div and p2div. */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0);
-+ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV);
-+ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV;
-+ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl);
-+
-+ /* Set ndiv int and ndiv mode */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2);
-+ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE);
-+ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT;
-+ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl);
-+
-+ /* Set ndiv frac */
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3);
-+ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC;
-+ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl);
-+
-+ /* Change the drive strength, if required. */
-+ if (buffer_strength) {
-+ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5);
-+ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV;
-+ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV;
-+ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl);
-+ }
-+
-+ /* Tune the crystalfreq and the divisor. */
-+ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL);
-+ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ);
-+ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT)
-+ & SSB_CHIPCO_PMU_CTL_ILP_DIV;
-+ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ;
-+ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl);
-+}
-+
-+static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 crystalfreq = 0; /* in kHz. 0 = keep default freq. */
-+
-+ if (bus->bustype == SSB_BUSTYPE_SSB) {
-+ /* TODO: The user may override the crystal frequency. */
-+ }
-+
-+ switch (bus->chip_id) {
-+ case 0x4312:
-+ case 0x4325:
-+ ssb_pmu1_pllinit_r0(cc, crystalfreq);
-+ break;
-+ case 0x4328:
-+ case 0x5354:
-+ ssb_pmu0_pllinit_r0(cc, crystalfreq);
-+ break;
-+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PLL init unknown for device %04X\n",
-+ bus->chip_id);
-+ }
-+}
-+
-+struct pmu_res_updown_tab_entry {
-+ u8 resource; /* The resource number */
-+ u16 updown; /* The updown value */
-+};
-+
-+enum pmu_res_depend_tab_task {
-+ PMU_RES_DEP_SET = 1,
-+ PMU_RES_DEP_ADD,
-+ PMU_RES_DEP_REMOVE,
-+};
-+
-+struct pmu_res_depend_tab_entry {
-+ u8 resource; /* The resource number */
-+ u8 task; /* SET | ADD | REMOVE */
-+ u32 depend; /* The depend mask */
-+};
-+
-+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = {
-+ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, },
-+ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, },
-+ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, },
-+ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, },
-+ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, },
-+ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, },
-+ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, },
-+};
-+
-+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = {
-+ {
-+ /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */
-+ .resource = SSB_PMURES_4328_ILP_REQUEST,
-+ .task = PMU_RES_DEP_SET,
-+ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
-+ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)),
-+ },
-+};
-+
-+static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = {
-+ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, },
-+};
-+
-+static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = {
-+ {
-+ /* Adjust HT-Available dependencies. */
-+ .resource = SSB_PMURES_4325_HT_AVAIL,
-+ .task = PMU_RES_DEP_ADD,
-+ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_TX_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) |
-+ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)),
-+ },
-+};
-+
-+static void ssb_pmu_resources_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 min_msk = 0, max_msk = 0;
-+ unsigned int i;
-+ const struct pmu_res_updown_tab_entry *updown_tab = NULL;
-+ unsigned int updown_tab_size;
-+ const struct pmu_res_depend_tab_entry *depend_tab = NULL;
-+ unsigned int depend_tab_size;
-+
-+ switch (bus->chip_id) {
-+ case 0x4312:
-+ /* We keep the default settings:
-+ * min_msk = 0xCBB
-+ * max_msk = 0x7FFFF
-+ */
-+ break;
-+ case 0x4325:
-+ /* Power OTP down later. */
-+ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) |
-+ (1 << SSB_PMURES_4325_LNLDO2_PU);
-+ if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) &
-+ SSB_CHIPCO_CHST_4325_PMUTOP_2B)
-+ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST);
-+ /* The PLL may turn on, if it decides so. */
-+ max_msk = 0xFFFFF;
-+ updown_tab = pmu_res_updown_tab_4325a0;
-+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4325a0);
-+ depend_tab = pmu_res_depend_tab_4325a0;
-+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0);
-+ break;
-+ case 0x4328:
-+ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) |
-+ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) |
-+ (1 << SSB_PMURES_4328_XTAL_EN);
-+ /* The PLL may turn on, if it decides so. */
-+ max_msk = 0xFFFFF;
-+ updown_tab = pmu_res_updown_tab_4328a0;
-+ updown_tab_size = ARRAY_SIZE(pmu_res_updown_tab_4328a0);
-+ depend_tab = pmu_res_depend_tab_4328a0;
-+ depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4328a0);
-+ break;
-+ case 0x5354:
-+ /* The PLL may turn on, if it decides so. */
-+ max_msk = 0xFFFFF;
-+ break;
-+ default:
-+ ssb_printk(KERN_ERR PFX
-+ "ERROR: PMU resource config unknown for device %04X\n",
-+ bus->chip_id);
-+ }
-+
-+ if (updown_tab) {
-+ for (i = 0; i < updown_tab_size; i++) {
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
-+ updown_tab[i].resource);
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_UPDNTM,
-+ updown_tab[i].updown);
-+ }
-+ }
-+ if (depend_tab) {
-+ for (i = 0; i < depend_tab_size; i++) {
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_TABSEL,
-+ depend_tab[i].resource);
-+ switch (depend_tab[i].task) {
-+ case PMU_RES_DEP_SET:
-+ chipco_write32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+ depend_tab[i].depend);
-+ break;
-+ case PMU_RES_DEP_ADD:
-+ chipco_set32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+ depend_tab[i].depend);
-+ break;
-+ case PMU_RES_DEP_REMOVE:
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_RES_DEPMSK,
-+ ~(depend_tab[i].depend));
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ }
-+ }
-+ }
-+
-+ /* Set the resource masks. */
-+ if (min_msk)
-+ chipco_write32(cc, SSB_CHIPCO_PMU_MINRES_MSK, min_msk);
-+ if (max_msk)
-+ chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk);
-+}
-+
-+void ssb_pmu_init(struct ssb_chipcommon *cc)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 pmucap;
-+
-+ if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU))
-+ return;
-+
-+ pmucap = chipco_read32(cc, SSB_CHIPCO_PMU_CAP);
-+ cc->pmu.rev = (pmucap & SSB_CHIPCO_PMU_CAP_REVISION);
-+
-+ ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n",
-+ cc->pmu.rev, pmucap);
-+
-+ if (cc->pmu.rev >= 1) {
-+ if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) {
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL,
-+ ~SSB_CHIPCO_PMU_CTL_NOILPONW);
-+ } else {
-+ chipco_set32(cc, SSB_CHIPCO_PMU_CTL,
-+ SSB_CHIPCO_PMU_CTL_NOILPONW);
-+ }
-+ }
-+ ssb_pmu_pll_init(cc);
-+ ssb_pmu_resources_init(cc);
-+}
-+
-+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc,
-+ enum ssb_pmu_ldo_volt_id id, u32 voltage)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ u32 addr, shift, mask;
-+
-+ switch (bus->chip_id) {
-+ case 0x4328:
-+ case 0x5354:
-+ switch (id) {
-+ case LDO_VOLT1:
-+ addr = 2;
-+ shift = 25;
-+ mask = 0xF;
-+ break;
-+ case LDO_VOLT2:
-+ addr = 3;
-+ shift = 1;
-+ mask = 0xF;
-+ break;
-+ case LDO_VOLT3:
-+ addr = 3;
-+ shift = 9;
-+ mask = 0xF;
-+ break;
-+ case LDO_PAREF:
-+ addr = 3;
-+ shift = 17;
-+ mask = 0x3F;
-+ break;
-+ default:
-+ SSB_WARN_ON(1);
-+ return;
-+ }
-+ break;
-+ case 0x4312:
-+ if (SSB_WARN_ON(id != LDO_PAREF))
-+ return;
-+ addr = 0;
-+ shift = 21;
-+ mask = 0x3F;
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ ssb_chipco_regctl_maskset(cc, addr, ~(mask << shift),
-+ (voltage & mask) << shift);
-+}
-+
-+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on)
-+{
-+ struct ssb_bus *bus = cc->dev->bus;
-+ int ldo;
-+
-+ switch (bus->chip_id) {
-+ case 0x4312:
-+ ldo = SSB_PMURES_4312_PA_REF_LDO;
-+ break;
-+ case 0x4328:
-+ ldo = SSB_PMURES_4328_PA_REF_LDO;
-+ break;
-+ case 0x5354:
-+ ldo = SSB_PMURES_5354_PA_REF_LDO;
-+ break;
-+ default:
-+ return;
-+ }
-+
-+ if (on)
-+ chipco_set32(cc, SSB_CHIPCO_PMU_MINRES_MSK, 1 << ldo);
-+ else
-+ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ~(1 << ldo));
-+ chipco_read32(cc, SSB_CHIPCO_PMU_MINRES_MSK); //SPEC FIXME found via mmiotrace - dummy read?
-+}
-+
-+EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage);
-+EXPORT_SYMBOL(ssb_pmu_set_ldo_paref);