diff options
Diffstat (limited to 'target/linux/gemini')
20 files changed, 0 insertions, 1592 deletions
diff --git a/target/linux/gemini/Makefile b/target/linux/gemini/Makefile index 867e284714..304e515980 100644 --- a/target/linux/gemini/Makefile +++ b/target/linux/gemini/Makefile @@ -14,7 +14,6 @@ CPU_TYPE:=fa526 MAINTAINER:=Roman Yeryomin <roman@advem.lv> KERNEL_PATCHVER:=4.14 -KERNEL_TESTING_PATCHVER := 4.19 define Target/Description Build firmware images for the StorLink/Cortina Gemini CS351x ARM FA526 CPU diff --git a/target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch b/target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch deleted file mode 100644 index 3bf9341e34..0000000000 --- a/target/linux/gemini/patches-4.19/0001-pinctrl-gemini-Mask-and-set-properly.patch +++ /dev/null @@ -1,31 +0,0 @@ -From f8ac3d3472a8dc99c8647a637611d146d88be8cb Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Tue, 9 Oct 2018 10:09:14 +0200 -Subject: [PATCH 01/18] pinctrl: gemini: Mask and set properly - -The code was written under the assumption that the -regmap_update_bits() would mask the bits in the mask and -set the bits in the value. - -It missed the points that it will not set bits in the value -unless these are also masked in the mask. Set value bits -that are not in the mask will simply be ignored. - -Fixes: 06351d133dea ("pinctrl: add a Gemini SoC pin controller") -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/pinctrl-gemini.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/pinctrl/pinctrl-gemini.c -+++ b/drivers/pinctrl/pinctrl-gemini.c -@@ -2184,7 +2184,8 @@ static int gemini_pmx_set_mux(struct pin - func->name, grp->name); - - regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before); -- regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL, grp->mask, -+ regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL, -+ grp->mask | grp->value, - grp->value); - regmap_read(pmx->map, GLOBAL_MISC_CTRL, &after); - diff --git a/target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch b/target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch deleted file mode 100644 index 64172acb44..0000000000 --- a/target/linux/gemini/patches-4.19/0002-pinctrl-gemini-Fix-up-TVC-clock-group.patch +++ /dev/null @@ -1,141 +0,0 @@ -From ce81398dccb984855de606b75db25eddecdaa9e5 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Wed, 10 Oct 2018 20:25:39 +0200 -Subject: [PATCH 02/18] pinctrl: gemini: Fix up TVC clock group - -The previous fix made the TVC clock get muxed in on the -D-Link DIR-685 instead of giving nagging warnings of this -not working. Not good. We didn't want that, as it breaks -video. - -Create a specific group for the TVC CLK, and break out -a specific GPIO group for it on the SL3516 so we can use -that line as GPIO if we don't need the TVC CLK. - -Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly") -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/pinctrl-gemini.c | 44 ++++++++++++++++++++++++++------ - 1 file changed, 36 insertions(+), 8 deletions(-) - ---- a/drivers/pinctrl/pinctrl-gemini.c -+++ b/drivers/pinctrl/pinctrl-gemini.c -@@ -591,13 +591,16 @@ static const unsigned int tvc_3512_pins[ - 319, /* TVC_DATA[1] */ - 301, /* TVC_DATA[2] */ - 283, /* TVC_DATA[3] */ -- 265, /* TVC_CLK */ - 320, /* TVC_DATA[4] */ - 302, /* TVC_DATA[5] */ - 284, /* TVC_DATA[6] */ - 266, /* TVC_DATA[7] */ - }; - -+static const unsigned int tvc_clk_3512_pins[] = { -+ 265, /* TVC_CLK */ -+}; -+ - /* NAND flash pins */ - static const unsigned int nflash_3512_pins[] = { - 199, 200, 201, 202, 216, 217, 218, 219, 220, 234, 235, 236, 237, 252, -@@ -629,7 +632,7 @@ static const unsigned int pflash_3512_pi - /* Serial flash pins CE0, CE1, DI, DO, CK */ - static const unsigned int sflash_3512_pins[] = { 230, 231, 232, 233, 211 }; - --/* The GPIO0A (0) pin overlap with TVC and extended parallel flash */ -+/* The GPIO0A (0) pin overlap with TVC CLK and extended parallel flash */ - static const unsigned int gpio0a_3512_pins[] = { 265 }; - - /* The GPIO0B (1-4) pins overlap with TVC and ICE */ -@@ -823,7 +826,13 @@ static const struct gemini_pin_group gem - .num_pins = ARRAY_SIZE(tvc_3512_pins), - /* Conflict with character LCD and ICE */ - .mask = LCD_PADS_ENABLE, -- .value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE, -+ .value = TVC_PADS_ENABLE, -+ }, -+ { -+ .name = "tvcclkgrp", -+ .pins = tvc_clk_3512_pins, -+ .num_pins = ARRAY_SIZE(tvc_clk_3512_pins), -+ .value = TVC_CLK_PAD_ENABLE, - }, - /* - * The construction is done such that it is possible to use a serial -@@ -860,8 +869,8 @@ static const struct gemini_pin_group gem - .name = "gpio0agrp", - .pins = gpio0a_3512_pins, - .num_pins = ARRAY_SIZE(gpio0a_3512_pins), -- /* Conflict with TVC */ -- .mask = TVC_PADS_ENABLE, -+ /* Conflict with TVC CLK */ -+ .mask = TVC_CLK_PAD_ENABLE, - }, - { - .name = "gpio0bgrp", -@@ -1531,13 +1540,16 @@ static const unsigned int tvc_3516_pins[ - 311, /* TVC_DATA[1] */ - 394, /* TVC_DATA[2] */ - 374, /* TVC_DATA[3] */ -- 333, /* TVC_CLK */ - 354, /* TVC_DATA[4] */ - 395, /* TVC_DATA[5] */ - 312, /* TVC_DATA[6] */ - 334, /* TVC_DATA[7] */ - }; - -+static const unsigned int tvc_clk_3516_pins[] = { -+ 333, /* TVC_CLK */ -+}; -+ - /* NAND flash pins */ - static const unsigned int nflash_3516_pins[] = { - 243, 260, 261, 224, 280, 262, 281, 264, 300, 263, 282, 301, 320, 283, -@@ -1570,7 +1582,7 @@ static const unsigned int pflash_3516_pi - static const unsigned int sflash_3516_pins[] = { 296, 338, 295, 359, 339 }; - - /* The GPIO0A (0-4) pins overlap with TVC and extended parallel flash */ --static const unsigned int gpio0a_3516_pins[] = { 333, 354, 395, 312, 334 }; -+static const unsigned int gpio0a_3516_pins[] = { 354, 395, 312, 334 }; - - /* The GPIO0B (5-7) pins overlap with ICE */ - static const unsigned int gpio0b_3516_pins[] = { 375, 396, 376 }; -@@ -1602,6 +1614,9 @@ static const unsigned int gpio0j_3516_pi - /* The GPIO0K (30,31) pins overlap with NAND flash */ - static const unsigned int gpio0k_3516_pins[] = { 275, 298 }; - -+/* The GPIO0L (0) pins overlap with TVC_CLK */ -+static const unsigned int gpio0l_3516_pins[] = { 333 }; -+ - /* The GPIO1A (0-4) pins that overlap with IDE and parallel flash */ - static const unsigned int gpio1a_3516_pins[] = { 221, 200, 222, 201, 220 }; - -@@ -1761,7 +1776,13 @@ static const struct gemini_pin_group gem - .num_pins = ARRAY_SIZE(tvc_3516_pins), - /* Conflict with character LCD */ - .mask = LCD_PADS_ENABLE, -- .value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE, -+ .value = TVC_PADS_ENABLE, -+ }, -+ { -+ .name = "tvcclkgrp", -+ .pins = tvc_clk_3516_pins, -+ .num_pins = ARRAY_SIZE(tvc_clk_3516_pins), -+ .value = TVC_CLK_PAD_ENABLE, - }, - /* - * The construction is done such that it is possible to use a serial -@@ -1873,6 +1894,13 @@ static const struct gemini_pin_group gem - .value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE, - }, - { -+ .name = "gpio0lgrp", -+ .pins = gpio0l_3516_pins, -+ .num_pins = ARRAY_SIZE(gpio0l_3516_pins), -+ /* Conflict with TVE CLK */ -+ .mask = TVC_CLK_PAD_ENABLE, -+ }, -+ { - .name = "gpio1agrp", - .pins = gpio1a_3516_pins, - .num_pins = ARRAY_SIZE(gpio1a_3516_pins), diff --git a/target/linux/gemini/patches-4.19/0003-pinctrl-gemini-Drop-noisy-debug-prints.patch b/target/linux/gemini/patches-4.19/0003-pinctrl-gemini-Drop-noisy-debug-prints.patch deleted file mode 100644 index d3383b3182..0000000000 --- a/target/linux/gemini/patches-4.19/0003-pinctrl-gemini-Drop-noisy-debug-prints.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 5d1bd9669ddcd26384672891c37110046e1ac8e8 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Tue, 9 Oct 2018 10:12:24 +0200 -Subject: [PATCH 03/18] pinctrl: gemini: Drop noisy debug prints - -The dev_info() in the pin control driver is really just good -for debug, so drop it. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/pinctrl-gemini.c | 32 ++++++++++++++++---------------- - 1 file changed, 16 insertions(+), 16 deletions(-) - ---- a/drivers/pinctrl/pinctrl-gemini.c -+++ b/drivers/pinctrl/pinctrl-gemini.c -@@ -2207,9 +2207,9 @@ static int gemini_pmx_set_mux(struct pin - return -ENODEV; - } - -- dev_info(pmx->dev, -- "ACTIVATE function \"%s\" with group \"%s\"\n", -- func->name, grp->name); -+ dev_dbg(pmx->dev, -+ "ACTIVATE function \"%s\" with group \"%s\"\n", -+ func->name, grp->name); - - regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before); - regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL, -@@ -2240,10 +2240,10 @@ static int gemini_pmx_set_mux(struct pin - "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n", - before, after, expected); - } else { -- dev_info(pmx->dev, -- "padgroup %s %s\n", -- gemini_padgroups[i], -- enabled ? "enabled" : "disabled"); -+ dev_dbg(pmx->dev, -+ "padgroup %s %s\n", -+ gemini_padgroups[i], -+ enabled ? "enabled" : "disabled"); - } - } - -@@ -2262,10 +2262,10 @@ static int gemini_pmx_set_mux(struct pin - "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n", - before, after, expected); - } else { -- dev_info(pmx->dev, -- "padgroup %s %s\n", -- gemini_padgroups[i], -- enabled ? "enabled" : "disabled"); -+ dev_dbg(pmx->dev, -+ "padgroup %s %s\n", -+ gemini_padgroups[i], -+ enabled ? "enabled" : "disabled"); - } - } - -@@ -2492,9 +2492,9 @@ static int gemini_pinconf_group_set(stru - regmap_update_bits(pmx->map, GLOBAL_IODRIVE, - grp->driving_mask, - val); -- dev_info(pmx->dev, -- "set group %s to %d mA drive strength mask %08x val %08x\n", -- grp->name, arg, grp->driving_mask, val); -+ dev_dbg(pmx->dev, -+ "set group %s to %d mA drive strength mask %08x val %08x\n", -+ grp->name, arg, grp->driving_mask, val); - break; - default: - dev_err(pmx->dev, "invalid config param %04x\n", param); -@@ -2585,8 +2585,8 @@ static int gemini_pmx_probe(struct platf - /* Print initial state */ - tmp = val; - for_each_set_bit(i, &tmp, PADS_MAXBIT) { -- dev_info(dev, "pad group %s %s\n", gemini_padgroups[i], -- (val & BIT(i)) ? "enabled" : "disabled"); -+ dev_dbg(dev, "pad group %s %s\n", gemini_padgroups[i], -+ (val & BIT(i)) ? "enabled" : "disabled"); - } - - /* Check if flash pin is set */ diff --git a/target/linux/gemini/patches-4.19/0004-boot-sq201-from-sda1.patch b/target/linux/gemini/patches-4.19/0004-boot-sq201-from-sda1.patch deleted file mode 100644 index d2fa02a957..0000000000 --- a/target/linux/gemini/patches-4.19/0004-boot-sq201-from-sda1.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 95be54e285767c5209bb51df923373f78b8c4099 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Mon, 16 Jul 2018 23:36:30 +0200 -Subject: [PATCH 04/18] boot sq201 from sda1 - ---- - arch/arm/boot/dts/gemini-sq201.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/gemini-sq201.dts -+++ b/arch/arm/boot/dts/gemini-sq201.dts -@@ -20,7 +20,7 @@ - }; - - chosen { -- bootargs = "console=ttyS0,115200n8"; -+ bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait"; - stdout-path = &uart0; - }; - diff --git a/target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch b/target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch deleted file mode 100644 index 5462844a79..0000000000 --- a/target/linux/gemini/patches-4.19/0005-mtd-physmap_of-Move-custom-initialization.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 58ecb60d53d43e8d584708722a2cf851ba88f9e1 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Thu, 11 Oct 2018 19:53:40 +0200 -Subject: [PATCH 05/18] mtd: physmap_of: Move custom initialization - -In order to be able to assign custom complex mappings -to the physmap_of plugin for Gemini, move the initialization -so that the simple map is initialized before we enter the -platform-specific functions so the latter can override -them. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/mtd/maps/physmap_of_core.c | 15 ++++++++------- - 1 file changed, 8 insertions(+), 7 deletions(-) - ---- a/drivers/mtd/maps/physmap_of_core.c -+++ b/drivers/mtd/maps/physmap_of_core.c -@@ -239,13 +239,6 @@ static int of_flash_probe(struct platfor - else if (of_property_read_bool(dp, "little-endian")) - info->list[i].map.swap = CFI_LITTLE_ENDIAN; - -- err = of_flash_probe_gemini(dev, dp, &info->list[i].map); -- if (err) -- goto err_out; -- err = of_flash_probe_versatile(dev, dp, &info->list[i].map); -- if (err) -- goto err_out; -- - err = -ENOMEM; - info->list[i].map.virt = ioremap(info->list[i].map.phys, - info->list[i].map.size); -@@ -257,6 +250,14 @@ static int of_flash_probe(struct platfor - - simple_map_init(&info->list[i].map); - -+ /* Variants can override map accessors */ -+ err = of_flash_probe_gemini(dev, dp, &info->list[i].map); -+ if (err) -+ goto err_out; -+ err = of_flash_probe_versatile(dev, dp, &info->list[i].map); -+ if (err) -+ goto err_out; -+ - /* - * On some platforms (e.g. MPC5200) a direct 1:1 mapping - * may cause problems with JFFS2 usage, as the local bus (LPB) diff --git a/target/linux/gemini/patches-4.19/0006-mtd-physmap_of_gemini-Handle-pin-control.patch b/target/linux/gemini/patches-4.19/0006-mtd-physmap_of_gemini-Handle-pin-control.patch deleted file mode 100644 index 128760d78a..0000000000 --- a/target/linux/gemini/patches-4.19/0006-mtd-physmap_of_gemini-Handle-pin-control.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 8e5e628a9de439d02914b85a48e1ac3e04ea486a Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Thu, 11 Oct 2018 20:03:49 +0200 -Subject: [PATCH 06/18] mtd: physmap_of_gemini: Handle pin control - -This enables the complex mapping for the Gemini and kicks in -custom read/write functions that will wrap the existing -simple functions in calls to enable/disable the parallel -flash pins using pin controls. - -This is necessary on some hardware such as the D-Link -DIR-685 where all flash pins are patched in/out at the same -time, but some of the flash pins are in practice unused by -the flash and have anyway been reused as GPIO. - -This concerns specifically CE1 on the Gemini. There is only -one flash chip, so only CE0 is used, and the line for CE1 -has been reused as chip select for the emulated SPI port -connected to the display. If we try to use the same lines -for flash and GPIO at the same time, one of them will loose: -the GPIO line will disappear because it gets disconnected -from the pin when the flash group is muxed out. - -Fix this by introducing two pin control states named simply -"enabled" and "disabled" and only enable the flash lines -when absolutely necessary (during read/write/copy). This -way, they are available for GPIO at all other times and -the display works. - -Collect all the state variables in a struct named -struct gemini_flash and allocate this struct at probe -time. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/mtd/maps/Kconfig | 1 + - drivers/mtd/maps/physmap_of_gemini.c | 105 ++++++++++++++++++++++++++- - 2 files changed, 105 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -89,6 +89,7 @@ config MTD_PHYSMAP_OF_GEMINI - depends on MTD_PHYSMAP_OF - depends on MFD_SYSCON - default ARCH_GEMINI -+ select MTD_COMPLEX_MAPPINGS - help - This provides some extra DT physmap parsing for the Gemini - platforms, some detection and setting up parallel mode on the ---- a/drivers/mtd/maps/physmap_of_gemini.c -+++ b/drivers/mtd/maps/physmap_of_gemini.c -@@ -10,9 +10,11 @@ - #include <linux/of.h> - #include <linux/of_device.h> - #include <linux/mtd/map.h> -+#include <linux/mtd/xip.h> - #include <linux/mfd/syscon.h> - #include <linux/regmap.h> - #include <linux/bitops.h> -+#include <linux/pinctrl/consumer.h> - #include "physmap_of_gemini.h" - - /* -@@ -49,6 +51,77 @@ static const struct of_device_id syscon_ - { }, - }; - -+struct gemini_flash { -+ struct device *dev; -+ struct pinctrl *p; -+ struct pinctrl_state *enabled_state; -+ struct pinctrl_state *disabled_state; -+}; -+ -+/* Static local state */ -+static struct gemini_flash *gf; -+ -+static void gemini_flash_enable_pins(void) -+{ -+ int ret; -+ -+ if (IS_ERR(gf->enabled_state)) -+ return; -+ ret = pinctrl_select_state(gf->p, gf->enabled_state); -+ if (ret) -+ dev_err(gf->dev, "failed to enable pins\n"); -+} -+ -+static void gemini_flash_disable_pins(void) -+{ -+ int ret; -+ -+ if (IS_ERR(gf->disabled_state)) -+ return; -+ ret = pinctrl_select_state(gf->p, gf->disabled_state); -+ if (ret) -+ dev_err(gf->dev, "failed to disable pins\n"); -+} -+ -+static map_word __xipram gemini_flash_map_read(struct map_info *map, -+ unsigned long ofs) -+{ -+ map_word __xipram ret; -+ -+ gemini_flash_enable_pins(); -+ ret = inline_map_read(map, ofs); -+ gemini_flash_disable_pins(); -+ -+ return ret; -+} -+ -+static void __xipram gemini_flash_map_write(struct map_info *map, -+ const map_word datum, -+ unsigned long ofs) -+{ -+ gemini_flash_enable_pins(); -+ inline_map_write(map, datum, ofs); -+ gemini_flash_disable_pins(); -+} -+ -+static void __xipram gemini_flash_map_copy_from(struct map_info *map, -+ void *to, unsigned long from, -+ ssize_t len) -+{ -+ gemini_flash_enable_pins(); -+ inline_map_copy_from(map, to, from, len); -+ gemini_flash_disable_pins(); -+} -+ -+static void __xipram gemini_flash_map_copy_to(struct map_info *map, -+ unsigned long to, -+ const void *from, ssize_t len) -+{ -+ gemini_flash_enable_pins(); -+ inline_map_copy_to(map, to, from, len); -+ gemini_flash_disable_pins(); -+} -+ - int of_flash_probe_gemini(struct platform_device *pdev, - struct device_node *np, - struct map_info *map) -@@ -62,6 +135,11 @@ int of_flash_probe_gemini(struct platfor - if (!of_device_is_compatible(np, "cortina,gemini-flash")) - return 0; - -+ gf = devm_kzalloc(dev, sizeof(*gf), GFP_KERNEL); -+ if (!gf) -+ return -ENOMEM; -+ gf->dev = dev; -+ - rmap = syscon_regmap_lookup_by_phandle(np, "syscon"); - if (IS_ERR(rmap)) { - dev_err(dev, "no syscon\n"); -@@ -96,7 +174,32 @@ int of_flash_probe_gemini(struct platfor - map->bankwidth * 8); - } - -- dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n"); -+ gf->p = devm_pinctrl_get(dev); -+ if (IS_ERR(gf->p)) { -+ dev_err(dev, "no pinctrl handle\n"); -+ ret = PTR_ERR(gf->p); -+ return ret; -+ } -+ -+ gf->enabled_state = pinctrl_lookup_state(gf->p, "enabled"); -+ if (IS_ERR(gf->enabled_state)) -+ dev_err(dev, "no enabled pin control state\n"); -+ -+ gf->disabled_state = pinctrl_lookup_state(gf->p, "disabled"); -+ if (IS_ERR(gf->enabled_state)) { -+ dev_err(dev, "no disabled pin control state\n"); -+ } else { -+ ret = pinctrl_select_state(gf->p, gf->disabled_state); -+ if (ret) -+ dev_err(gf->dev, "failed to disable pins\n"); -+ } -+ -+ map->read = gemini_flash_map_read; -+ map->write = gemini_flash_map_write; -+ map->copy_from = gemini_flash_map_copy_from; -+ map->copy_to = gemini_flash_map_copy_to; -+ -+ dev_info(dev, "initialized Gemini-specific physmap control\n"); - - return 0; - } diff --git a/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch b/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch deleted file mode 100644 index 372242c68b..0000000000 --- a/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch +++ /dev/null @@ -1,162 +0,0 @@ -From 74631102645df8984acbdf67b731e4d437f27fed Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Thu, 11 Oct 2018 20:06:23 +0200 -Subject: [PATCH 08/18] ARM: dts: Enable Gemini flash access - -Some Gemini platforms have a parallel NOR flash which conflicts -with use cases reusing some of the flash lines (such as CE1) -for GPIO. - -Fix this on the D-Link DIR-685 and Itian SQ201 by creating -"enabled" and "disabled" states for the flash pin control -handle, and rely on the flash handling code to switch this -in and out when accessed so these lines can be used -for GPIO when flash is not accessed, and enable flash -access. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 35 +++++++++++++++------- - arch/arm/boot/dts/gemini-sq201.dts | 31 ++++++++++--------- - 2 files changed, 41 insertions(+), 25 deletions(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -64,7 +64,6 @@ - gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; - gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; - gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; -- /* Collides with pflash CE1, not so cool */ - cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - num-chipselects = <1>; - -@@ -253,15 +252,18 @@ - soc { - flash@30000000 { - /* -- * Flash access is by default disabled, because it -- * collides with the Chip Enable signal for the display -- * panel, that reuse the parallel flash Chip Select 1 -- * (CS1). Enabling flash makes graphics stop working. -- * -- * We might be able to hack around this by letting -- * GPIO poke around in the flash controller registers. -+ * Flash access collides with the Chip Enable signal for -+ * the display panel, that reuse the parallel flash Chip -+ * Select 1 (CS1). We switch the pin control state so we -+ * enable these pins for flash access only when we need -+ * then, and when disabled they can be used for GPIO which -+ * is what the display panel needs. - */ -- /* status = "okay"; */ -+ status = "okay"; -+ pinctrl-names = "enabled", "disabled"; -+ pinctrl-0 = <&pflash_default_pins>; -+ pinctrl-1 = <&pflash_disabled_pins>; -+ - /* 32MB of flash */ - reg = <0x30000000 0x02000000>; - -@@ -327,7 +329,6 @@ - "gpio0cgrp", - "gpio0egrp", - "gpio0fgrp", -- "gpio0ggrp", - "gpio0hgrp"; - }; - }; -@@ -342,6 +343,18 @@ - groups = "gpio1bgrp"; - }; - }; -+ /* -+ * These GPIO groups will be mapped in over some -+ * of the flash pins when the flash is not in -+ * active use. -+ */ -+ pflash_disabled_pins: pinctrl-pflash-disabled { -+ mux { -+ function = "gpio0"; -+ groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", -+ "gpio0kgrp"; -+ }; -+ }; - pinctrl-gmii { - mux { - function = "gmii"; -@@ -430,7 +443,7 @@ - }; - - display-controller@6a000000 { -- status = "okay"; -+ status = "disabled"; - - port@0 { - reg = <0>; ---- a/arch/arm/boot/dts/gemini-sq201.dts -+++ b/arch/arm/boot/dts/gemini-sq201.dts -@@ -41,14 +41,12 @@ - compatible = "gpio-leds"; - led-green-info { - label = "sq201:green:info"; -- /* Conflict with parallel flash */ - gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - led-green-usb { - label = "sq201:green:usb"; -- /* Conflict with parallel and NAND flash */ - gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "usb-host"; -@@ -126,15 +124,10 @@ - - soc { - flash@30000000 { -- /* -- * Flash access can be enabled, with the side effect -- * of disabling access to GPIO LED on GPIO0[20] which -- * reuse one of the parallel flash chip select lines. -- * Also the default firmware on the machine has the -- * problem that since it uses the flash, the two LEDS -- * on the right become numb. -- */ -- /* status = "okay"; */ -+ status = "okay"; -+ pinctrl-names = "enabled", "disabled"; -+ pinctrl-0 = <&pflash_default_pins>; -+ pinctrl-1 = <&pflash_disabled_pins>; - /* 16MB of flash */ - reg = <0x30000000 0x01000000>; - -@@ -184,9 +177,7 @@ - mux { - function = "gpio0"; - groups = "gpio0fgrp", -- "gpio0ggrp", -- "gpio0hgrp", -- "gpio0kgrp"; -+ "gpio0hgrp"; - }; - }; - /* -@@ -199,6 +190,18 @@ - groups = "gpio1dgrp"; - }; - }; -+ /* -+ * These GPIO groups will be mapped in over some -+ * of the flash pins when the flash is not in -+ * active use. -+ */ -+ pflash_disabled_pins: pinctrl-pflash-disabled { -+ mux { -+ function = "gpio0"; -+ groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp", -+ "gpio0kgrp"; -+ }; -+ }; - pinctrl-gmii { - mux { - function = "gmii"; diff --git a/target/linux/gemini/patches-4.19/0009-mtd-partitions-Add-RedBoot-FIS-DT-bindings.patch b/target/linux/gemini/patches-4.19/0009-mtd-partitions-Add-RedBoot-FIS-DT-bindings.patch deleted file mode 100644 index bc3c927db8..0000000000 --- a/target/linux/gemini/patches-4.19/0009-mtd-partitions-Add-RedBoot-FIS-DT-bindings.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 3dfe7ff875a64b83de21dad6365225f41f3cdb17 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 19 Oct 2018 08:22:18 +0200 -Subject: [PATCH 09/18] mtd: partitions: Add RedBoot FIS DT bindings - -This adds device tree bindings for the RedBoot FIS partition -format. - -Cc: devicetree@vger.kernel.org -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - .../bindings/mtd/partitions/redboot-fis.txt | 27 +++++++++++++++++++ - 1 file changed, 27 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt -@@ -0,0 +1,27 @@ -+RedBoot FLASH Image System (FIS) Partitions -+=========================================== -+ -+The FLASH Image System (FIS) directory is a flash description -+format closely associated with the RedBoot boot loader. -+ -+It uses one single flash eraseblock in the flash to store an index of -+all images in the flash. -+ -+This block size will vary depending on flash but is typically -+32 KB in size. -+ -+Required properties: -+- compatible : (required) must be "redboot-fis" -+- fis-index-block : (required) a index to the eraseblock containing -+ the FIS directory on this device. On a flash memory with 32KB -+ eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the -+ second eraseblock at 0x00008000 and so on. -+ -+Example: -+ -+flash@0 { -+ partitions { -+ compatible = "redboot-fis"; -+ fis-index-block = <0>; -+ }; -+}; diff --git a/target/linux/gemini/patches-4.19/0010-mtd-partitions-Add-second-compatible-for-redboot.patch b/target/linux/gemini/patches-4.19/0010-mtd-partitions-Add-second-compatible-for-redboot.patch deleted file mode 100644 index d888e78187..0000000000 --- a/target/linux/gemini/patches-4.19/0010-mtd-partitions-Add-second-compatible-for-redboot.patch +++ /dev/null @@ -1,72 +0,0 @@ -From e1b9d122030220d8b8176d9e23568e26fa2f9d23 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 19 Oct 2018 08:56:41 +0200 -Subject: [PATCH 10/18] mtd: partitions: Add second compatible for redboot - -Simple backport of the upstream redboot partition table -bindings that are used in the mainline Linux kernel. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/mtd/redboot.c | 29 ++++++++++++++++++++++++++++- - 1 file changed, 28 insertions(+), 1 deletion(-) - ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -25,7 +25,7 @@ - #include <linux/slab.h> - #include <linux/init.h> - #include <linux/vmalloc.h> -- -+#include <linux/of.h> - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> - #include <linux/module.h> -@@ -56,6 +56,31 @@ static inline int redboot_checksum(struc - return 1; - } - -+#ifdef CONFIG_OF -+static void parse_redboot_of(struct mtd_info *master) -+{ -+ struct device_node *np; -+ u32 dirblock; -+ int ret; -+ -+ np = mtd_get_of_node(master); -+ if (!np) -+ return; -+ ret = of_property_read_u32(np, "fis-index-block", &dirblock); -+ if (ret) -+ return; -+ /* -+ * Assign the block found in the device tree to the local -+ * directory block pointer. -+ */ -+ directory = dirblock; -+} -+#else -+static void parse_redboot_of(struct mtd_info *master) -+{ -+} -+#endif -+ - static int parse_redboot_partitions(struct mtd_info *master, - const struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -75,6 +100,7 @@ static int parse_redboot_partitions(stru - #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - static char nullstring[] = "unallocated"; - #endif -+ parse_redboot_of(master); - - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; -@@ -298,6 +324,7 @@ static int parse_redboot_partitions(stru - - static const struct of_device_id redboot_parser_of_match_table[] = { - { .compatible = "ecoscentric,redboot-fis-partitions" }, -+ { .compatible = "redboot-fis" }, - {}, - }; - MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table); diff --git a/target/linux/gemini/patches-4.19/0011-ARM-dts-Fix-up-SQ201-flash-access.patch b/target/linux/gemini/patches-4.19/0011-ARM-dts-Fix-up-SQ201-flash-access.patch deleted file mode 100644 index 7517d62ed3..0000000000 --- a/target/linux/gemini/patches-4.19/0011-ARM-dts-Fix-up-SQ201-flash-access.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 186692e51e6c40d8ebd05d25f009098eb00f8110 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 19 Oct 2018 09:00:51 +0200 -Subject: [PATCH 11/18] ARM: dts: Fix up SQ201 flash access - -This sets the partition information on the SQ201 to be read -out from the RedBoot partition table, removes the static -partition table and sets our boot options to mount root from -/dev/mtdblock2 where the initramfs resides. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - arch/arm/boot/dts/gemini-sq201.dts | 37 ++++-------------------------- - 1 file changed, 5 insertions(+), 32 deletions(-) - ---- a/arch/arm/boot/dts/gemini-sq201.dts -+++ b/arch/arm/boot/dts/gemini-sq201.dts -@@ -20,7 +20,7 @@ - }; - - chosen { -- bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait"; -+ bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; - stdout-path = &uart0; - }; - -@@ -131,37 +131,10 @@ - /* 16MB of flash */ - reg = <0x30000000 0x01000000>; - -- partition@0 { -- label = "RedBoot"; -- reg = <0x00000000 0x00120000>; -- read-only; -- }; -- partition@120000 { -- label = "Kernel"; -- reg = <0x00120000 0x00200000>; -- }; -- partition@320000 { -- label = "Ramdisk"; -- reg = <0x00320000 0x00600000>; -- }; -- partition@920000 { -- label = "Application"; -- reg = <0x00920000 0x00600000>; -- }; -- partition@f20000 { -- label = "VCTL"; -- reg = <0x00f20000 0x00020000>; -- read-only; -- }; -- partition@f40000 { -- label = "CurConf"; -- reg = <0x00f40000 0x000a0000>; -- read-only; -- }; -- partition@fe0000 { -- label = "FIS directory"; -- reg = <0x00fe0000 0x00020000>; -- read-only; -+ partitions { -+ compatible = "redboot-fis"; -+ /* Eraseblock at 0xfe0000 */ -+ fis-index-block = <0x1fc>; - }; - }; - diff --git a/target/linux/gemini/patches-4.19/0012-ARM-dts-Blank-D-Link-DIR-685-console.patch b/target/linux/gemini/patches-4.19/0012-ARM-dts-Blank-D-Link-DIR-685-console.patch deleted file mode 100644 index ebddc3ab90..0000000000 --- a/target/linux/gemini/patches-4.19/0012-ARM-dts-Blank-D-Link-DIR-685-console.patch +++ /dev/null @@ -1,25 +0,0 @@ -From ec8b953c92c1dd0e0f1450f4b9a32c60125d4510 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Mon, 27 Aug 2018 00:10:39 +0200 -Subject: [PATCH 12/18] ARM: dts: Blank D-Link DIR-685 console - -Leaving this NAS with display and backlight on heats it up -and dissipates power. Turn off the screen after 4 minutes, -it comes back on when a user touches the keys. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -20,7 +20,7 @@ - }; - - chosen { -- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; -+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300"; - stdout-path = "uart0:19200n8"; - }; - diff --git a/target/linux/gemini/patches-4.19/0013-usb-host-fotg2-add-silicon-clock-handling.patch b/target/linux/gemini/patches-4.19/0013-usb-host-fotg2-add-silicon-clock-handling.patch deleted file mode 100644 index b28454e6f1..0000000000 --- a/target/linux/gemini/patches-4.19/0013-usb-host-fotg2-add-silicon-clock-handling.patch +++ /dev/null @@ -1,116 +0,0 @@ -From e76906e8e9dfaeeb22a37706aca493b86e4367bd Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 21 Apr 2017 20:46:12 +0200 -Subject: [PATCH 13/18] usb: host: fotg2: add silicon clock handling - -When used in a system with software-controlled silicon clocks, -the FOTG210 needs to grab, prepare and enable the clock. - -This is needed on for example the Cortina Gemini, where the -platform will by default gate off the clock unless the -peripheral (in this case the USB driver) grabs and enables -the clock. - -If there is no clock available on the platform, we live -without it. Make sure to percolate probe deferrals. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- -ChangeLog v1->v2: -- Handle probe deferrals on the clock controller, no matter - how unlikely they are. -- Send the patch to get Gemini USB rolling and try to get some - stuff upstream, this patch should be fine on its own. ---- - drivers/usb/host/fotg210-hcd.c | 33 +++++++++++++++++++++++++++++---- - drivers/usb/host/fotg210.h | 3 +++ - 2 files changed, 32 insertions(+), 4 deletions(-) - ---- a/drivers/usb/host/fotg210-hcd.c -+++ b/drivers/usb/host/fotg210-hcd.c -@@ -31,6 +31,7 @@ - #include <linux/uaccess.h> - #include <linux/platform_device.h> - #include <linux/io.h> -+#include <linux/clk.h> - - #include <asm/byteorder.h> - #include <asm/irq.h> -@@ -5596,7 +5597,7 @@ static int fotg210_hcd_probe(struct plat - hcd->regs = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(hcd->regs)) { - retval = PTR_ERR(hcd->regs); -- goto failed; -+ goto failed_put_hcd; - } - - hcd->rsrc_start = res->start; -@@ -5606,22 +5607,42 @@ static int fotg210_hcd_probe(struct plat - - fotg210->caps = hcd->regs; - -+ /* It's OK not to supply this clock */ -+ fotg210->pclk = clk_get(dev, "PCLK"); -+ if (!IS_ERR(fotg210->pclk)) { -+ retval = clk_prepare_enable(fotg210->pclk); -+ if (retval) { -+ dev_err(dev, "failed to enable PCLK\n"); -+ goto failed_put_hcd; -+ } -+ } else if (PTR_ERR(fotg210->pclk) == -EPROBE_DEFER) { -+ /* -+ * Percolate deferrals, for anything else, -+ * just live without the clocking. -+ */ -+ retval = PTR_ERR(fotg210->pclk); -+ goto failed_dis_clk; -+ } -+ - retval = fotg210_setup(hcd); - if (retval) -- goto failed; -+ goto failed_dis_clk; - - fotg210_init(fotg210); - - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval) { - dev_err(dev, "failed to add hcd with err %d\n", retval); -- goto failed; -+ goto failed_dis_clk; - } - device_wakeup_enable(hcd->self.controller); - - return retval; - --failed: -+failed_dis_clk: -+ if (!IS_ERR(fotg210->pclk)) -+ clk_disable_unprepare(fotg210->pclk); -+failed_put_hcd: - usb_put_hcd(hcd); - fail_create_hcd: - dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval); -@@ -5637,6 +5658,10 @@ static int fotg210_hcd_remove(struct pla - { - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); -+ struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd); -+ -+ if (!IS_ERR(fotg210->pclk)) -+ clk_disable_unprepare(fotg210->pclk); - - if (!hcd) - return 0; ---- a/drivers/usb/host/fotg210.h -+++ b/drivers/usb/host/fotg210.h -@@ -182,6 +182,9 @@ struct fotg210_hcd { /* one per contro - # define COUNT(x) - #endif - -+ /* silicon clock */ -+ struct clk *pclk; -+ - /* debug files */ - struct dentry *debug_dir; - }; diff --git a/target/linux/gemini/patches-4.19/0014-usb-host-add-DT-bindings-for-faraday-fotg2.patch b/target/linux/gemini/patches-4.19/0014-usb-host-add-DT-bindings-for-faraday-fotg2.patch deleted file mode 100644 index 4bac72a5d1..0000000000 --- a/target/linux/gemini/patches-4.19/0014-usb-host-add-DT-bindings-for-faraday-fotg2.patch +++ /dev/null @@ -1,63 +0,0 @@ -From f9cfc45c57227448d4239e9582258587aacf34e7 Mon Sep 17 00:00:00 2001 -From: Hans Ulli Kroll <ulli.kroll@googlemail.com> -Date: Wed, 8 Feb 2017 21:00:09 +0100 -Subject: [PATCH 14/18] usb: host: add DT bindings for faraday fotg2 - -This adds device tree bindings for the Faraday FOTG2 -dual-mode host controller. - -Cc: devicetree@vger.kernel.org -Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> -Acked-by: Rob Herring <robh@kernel.org> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- -ChangeLog v1->v2: -- Changed "OTH" to "OTG" -- Collected Rob's ACK. -- I don't see any problem with these bindings, but IIRC Hans - had some reservations for the OTG mode, maybe we can strip - some properties like the mini-usb thing and use as a starter - so we can add host mode at least? ---- - .../bindings/usb/faraday,fotg210.txt | 35 +++++++++++++++++++ - 1 file changed, 35 insertions(+) - create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt -@@ -0,0 +1,35 @@ -+Faraday FOTG Host controller -+ -+This OTG-capable USB host controller is found in Cortina Systems -+Gemini and other SoC products. -+ -+Required properties: -+- compatible: should be one of: -+ "faraday,fotg210" -+ "cortina,gemini-usb", "faraday,fotg210" -+- reg: should contain one register range i.e. start and length -+- interrupts: description of the interrupt line -+ -+Optional properties: -+- clocks: should contain the IP block clock -+- clock-names: should be "PCLK" for the IP block clock -+ -+Required properties for "cortina,gemini-usb" compatible: -+- syscon: a phandle to the system controller to access PHY registers -+ -+Optional properties for "cortina,gemini-usb" compatible: -+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B -+ OTG connector is in use -+- wakeup-source: see power/wakeup-source.txt -+ -+Example for Gemini: -+ -+usb@68000000 { -+ compatible = "cortina,gemini-usb", "faraday,fotg210"; -+ reg = <0x68000000 0x1000>; -+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&cc 12>; -+ clock-names = "PCLK"; -+ syscon = <&syscon>; -+ wakeup-source; -+}; diff --git a/target/linux/gemini/patches-4.19/0015-usb-host-fotg2-add-device-tree-probing.patch b/target/linux/gemini/patches-4.19/0015-usb-host-fotg2-add-device-tree-probing.patch deleted file mode 100644 index 8950ef040f..0000000000 --- a/target/linux/gemini/patches-4.19/0015-usb-host-fotg2-add-device-tree-probing.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 8f45c69ba80a993a6dba2397825b27e11fa9dea7 Mon Sep 17 00:00:00 2001 -From: Hans Ulli Kroll <ulli.kroll@googlemail.com> -Date: Thu, 9 Feb 2017 15:20:49 +0100 -Subject: [PATCH 15/18] usb: host: fotg2: add device tree probing - -Add device tree probing to the fotg2 driver. - -Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> -[Drop DMA mask coercion, drivers/of/platform.c does the job] -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/usb/host/fotg210-hcd.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/drivers/usb/host/fotg210-hcd.c -+++ b/drivers/usb/host/fotg210-hcd.c -@@ -10,6 +10,7 @@ - * Most of code borrowed from the Linux-3.7 EHCI driver - */ - #include <linux/module.h> -+#include <linux/of.h> - #include <linux/device.h> - #include <linux/dmapool.h> - #include <linux/kernel.h> -@@ -5672,9 +5673,18 @@ static int fotg210_hcd_remove(struct pla - return 0; - } - -+#ifdef CONFIG_OF -+static const struct of_device_id fotg210_of_match[] = { -+ { .compatible = "faraday,fotg210" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, fotg210_of_match); -+#endif -+ - static struct platform_driver fotg210_hcd_driver = { - .driver = { - .name = "fotg210-hcd", -+ .of_match_table = of_match_ptr(fotg210_of_match), - }, - .probe = fotg210_hcd_probe, - .remove = fotg210_hcd_remove, diff --git a/target/linux/gemini/patches-4.19/0016-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-4.19/0016-usb-host-fotg2-add-Gemini-specific-handling.patch deleted file mode 100644 index 51bd0e7d7e..0000000000 --- a/target/linux/gemini/patches-4.19/0016-usb-host-fotg2-add-Gemini-specific-handling.patch +++ /dev/null @@ -1,131 +0,0 @@ -From b331ae758123ba20ba41199e007ac33fc0f242e3 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 21 Apr 2017 22:19:00 +0200 -Subject: [PATCH 16/18] usb: host: fotg2: add Gemini-specific handling - -The Cortina Systems Gemini has bolted on a PHY inside the -silicon that can be handled by six bits in a MISC register in -the system controller. - -If we are running on Gemini, look up a syscon regmap through -a phandle and enable VBUS and optionally the Mini-B connector. - -If the device is flagged as "wakeup-source" using the standard -DT bindings, we also enable this in the global controller for -respective port. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/usb/host/Kconfig | 1 + - drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++ - 2 files changed, 77 insertions(+) - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -372,6 +372,7 @@ config USB_ISP1362_HCD - config USB_FOTG210_HCD - tristate "FOTG210 HCD support" - depends on USB && HAS_DMA && HAS_IOMEM -+ select MFD_SYSCON - ---help--- - Faraday FOTG210 is an OTG controller which can be configured as - an USB2.0 host. It is designed to meet USB2.0 EHCI specification ---- a/drivers/usb/host/fotg210-hcd.c -+++ b/drivers/usb/host/fotg210-hcd.c -@@ -33,6 +33,10 @@ - #include <linux/platform_device.h> - #include <linux/io.h> - #include <linux/clk.h> -+#include <linux/bitops.h> -+/* For Cortina Gemini */ -+#include <linux/mfd/syscon.h> -+#include <linux/regmap.h> - - #include <asm/byteorder.h> - #include <asm/irq.h> -@@ -5554,6 +5558,72 @@ static void fotg210_init(struct fotg210_ - iowrite32(value, &fotg210->regs->otgcsr); - } - -+/* -+ * Gemini-specific initialization function, only executed on the -+ * Gemini SoC using the global misc control register. -+ */ -+#define GEMINI_GLOBAL_MISC_CTRL 0x30 -+#define GEMINI_MISC_USB0_WAKEUP BIT(14) -+#define GEMINI_MISC_USB1_WAKEUP BIT(15) -+#define GEMINI_MISC_USB0_VBUS_ON BIT(22) -+#define GEMINI_MISC_USB1_VBUS_ON BIT(23) -+#define GEMINI_MISC_USB0_MINI_B BIT(29) -+#define GEMINI_MISC_USB1_MINI_B BIT(30) -+ -+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd) -+{ -+ struct device_node *np = dev->of_node; -+ struct regmap *map; -+ bool mini_b; -+ bool wakeup; -+ u32 mask, val; -+ int ret; -+ -+ map = syscon_regmap_lookup_by_phandle(np, "syscon"); -+ if (IS_ERR(map)) { -+ dev_err(dev, "no syscon\n"); -+ return PTR_ERR(map); -+ } -+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b"); -+ wakeup = of_property_read_bool(np, "wakeup-source"); -+ -+ /* -+ * Figure out if this is USB0 or USB1 by simply checking the -+ * physical base address. -+ */ -+ mask = 0; -+ if (hcd->rsrc_start == 0x69000000) { -+ val = GEMINI_MISC_USB1_VBUS_ON; -+ if (mini_b) -+ val |= GEMINI_MISC_USB1_MINI_B; -+ else -+ mask |= GEMINI_MISC_USB1_MINI_B; -+ if (wakeup) -+ val |= GEMINI_MISC_USB1_WAKEUP; -+ else -+ mask |= GEMINI_MISC_USB1_WAKEUP; -+ } else { -+ val = GEMINI_MISC_USB0_VBUS_ON; -+ if (mini_b) -+ val |= GEMINI_MISC_USB0_MINI_B; -+ else -+ mask |= GEMINI_MISC_USB0_MINI_B; -+ if (wakeup) -+ val |= GEMINI_MISC_USB0_WAKEUP; -+ else -+ mask |= GEMINI_MISC_USB0_WAKEUP; -+ } -+ -+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val); -+ if (ret) { -+ dev_err(dev, "failed to initialize Gemini PHY\n"); -+ return ret; -+ } -+ -+ dev_info(dev, "initialized Gemini PHY\n"); -+ return 0; -+} -+ - /** - * fotg210_hcd_probe - initialize faraday FOTG210 HCDs - * -@@ -5631,6 +5701,12 @@ static int fotg210_hcd_probe(struct plat - - fotg210_init(fotg210); - -+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) { -+ retval = fotg210_gemini_init(dev, hcd); -+ if (retval) -+ goto failed_dis_clk; -+ } -+ - retval = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (retval) { - dev_err(dev, "failed to add hcd with err %d\n", retval); diff --git a/target/linux/gemini/patches-4.19/0017-usb-host-fotg2-restart-hcd-after-port-reset.patch b/target/linux/gemini/patches-4.19/0017-usb-host-fotg2-restart-hcd-after-port-reset.patch deleted file mode 100644 index 0b5e81ce54..0000000000 --- a/target/linux/gemini/patches-4.19/0017-usb-host-fotg2-restart-hcd-after-port-reset.patch +++ /dev/null @@ -1,27 +0,0 @@ -From b9d300b5aea18f2e992201d182d939030130aab2 Mon Sep 17 00:00:00 2001 -From: Hans Ulli Kroll <ulli.kroll@googlemail.com> -Date: Sat, 14 Apr 2018 18:49:57 +0200 -Subject: [PATCH 17/18] usb: host: fotg2: restart hcd after port reset - -on Gemini SoC FOTG2 stalls after port reset -rerstart the hcd. - -Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/usb/host/fotg210-hcd.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/usb/host/fotg210-hcd.c -+++ b/drivers/usb/host/fotg210-hcd.c -@@ -1633,6 +1633,10 @@ static int fotg210_hub_control(struct us - /* see what we found out */ - temp = check_reset_complete(fotg210, wIndex, status_reg, - fotg210_readl(fotg210, status_reg)); -+ -+ /* restart schedule */ -+ fotg210->command |= CMD_RUN; -+ fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command); - } - - if (!(temp & (PORT_RESUME|PORT_RESET))) { diff --git a/target/linux/gemini/patches-4.19/0018-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini-boards.patch b/target/linux/gemini/patches-4.19/0018-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini-boards.patch deleted file mode 100644 index 83d993b1f9..0000000000 --- a/target/linux/gemini/patches-4.19/0018-ARM-dts-Add-the-FOTG210-USB-host-to-Gemini-boards.patch +++ /dev/null @@ -1,191 +0,0 @@ -From 1ff9a279dbeb0034929042faef186ce934474c2b Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 21 Apr 2017 20:50:22 +0200 -Subject: [PATCH 18/18] ARM: dts: Add the FOTG210 USB host to Gemini boards - -This adds the FOTG210 USB host controller to the Gemini -device trees. In the main SoC DTSI it is flagged as disabled -and then it is selectively enabled on the devices that utilize -it. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- -ChangeLog v1->v2: -- Rebased to kernel v4.19-rc1 -- Drop pinctrl-0 handle from the second USB port -- Add comment on how to deal with the USB pin control ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 8 ++++++ - arch/arm/boot/dts/gemini-nas4220b.dts | 8 ++++++ - arch/arm/boot/dts/gemini-rut1xx.dts | 20 ++++++++++++++ - arch/arm/boot/dts/gemini-sl93512r.dts | 8 ++++++ - arch/arm/boot/dts/gemini-sq201.dts | 8 ++++++ - arch/arm/boot/dts/gemini-wbd111.dts | 8 ++++++ - arch/arm/boot/dts/gemini-wbd222.dts | 8 ++++++ - arch/arm/boot/dts/gemini.dtsi | 32 ++++++++++++++++++++++ - 8 files changed, 100 insertions(+) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -452,5 +452,13 @@ - }; - }; - }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini-nas4220b.dts -+++ b/arch/arm/boot/dts/gemini-nas4220b.dts -@@ -204,5 +204,13 @@ - ata@63400000 { - status = "okay"; - }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini-rut1xx.dts -+++ b/arch/arm/boot/dts/gemini-rut1xx.dts -@@ -124,5 +124,25 @@ - /* Not used in this platform */ - }; - }; -+ -+ ethernet@60000000 { -+ status = "okay"; -+ -+ ethernet-port@0 { -+ phy-mode = "rgmii"; -+ phy-handle = <&phy0>; -+ }; -+ ethernet-port@1 { -+ /* Not used in this platform */ -+ }; -+ }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini-sl93512r.dts -+++ b/arch/arm/boot/dts/gemini-sl93512r.dts -@@ -324,5 +324,13 @@ - ata@63400000 { - status = "okay"; - }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini-sq201.dts -+++ b/arch/arm/boot/dts/gemini-sq201.dts -@@ -292,5 +292,13 @@ - ata@63000000 { - status = "okay"; - }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini-wbd111.dts -+++ b/arch/arm/boot/dts/gemini-wbd111.dts -@@ -171,5 +171,13 @@ - /* Not used in this platform */ - }; - }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini-wbd222.dts -+++ b/arch/arm/boot/dts/gemini-wbd222.dts -@@ -183,5 +183,13 @@ - phy-handle = <&phy1>; - }; - }; -+ -+ usb@68000000 { -+ status = "okay"; -+ }; -+ -+ usb@69000000 { -+ status = "okay"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/gemini.dtsi -+++ b/arch/arm/boot/dts/gemini.dtsi -@@ -409,5 +409,37 @@ - #size-cells = <0>; - status = "disabled"; - }; -+ -+ usb@68000000 { -+ compatible = "cortina,gemini-usb", "faraday,fotg210"; -+ reg = <0x68000000 0x1000>; -+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; -+ resets = <&syscon GEMINI_RESET_USB0>; -+ clocks = <&syscon GEMINI_CLK_GATE_USB0>; -+ clock-names = "PCLK"; -+ /* -+ * This will claim pins for USB0 and USB1 at the same -+ * time as they are using some common pins. If you for -+ * some reason have a system using USB1 at 96000000 but -+ * NOT using USB0 at 68000000 you wll have to add the -+ * usb_default_pins to the USB controller at 96000000 -+ * in your .dts for the board. -+ */ -+ pinctrl-names = "default"; -+ pinctrl-0 = <&usb_default_pins>; -+ syscon = <&syscon>; -+ status = "disabled"; -+ }; -+ -+ usb@69000000 { -+ compatible = "cortina,gemini-usb", "faraday,fotg210"; -+ reg = <0x69000000 0x1000>; -+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; -+ resets = <&syscon GEMINI_RESET_USB1>; -+ clocks = <&syscon GEMINI_CLK_GATE_USB1>; -+ clock-names = "PCLK"; -+ syscon = <&syscon>; -+ status = "disabled"; -+ }; - }; - }; diff --git a/target/linux/gemini/patches-4.19/0019-ARM-dts-gemini-Indent-DIR-685-partition-table.patch b/target/linux/gemini/patches-4.19/0019-ARM-dts-gemini-Indent-DIR-685-partition-table.patch deleted file mode 100644 index c205b5f88d..0000000000 --- a/target/linux/gemini/patches-4.19/0019-ARM-dts-gemini-Indent-DIR-685-partition-table.patch +++ /dev/null @@ -1,105 +0,0 @@ -From 4a228ecf553e879bae384e634bb6413438e81a0e Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Mon, 11 Mar 2019 15:43:05 +0100 -Subject: [PATCH 1/2] ARM: dts: gemini: Indent DIR-685 partition table - -It is discouraged to have OF partitions as subnodes directly -under the device, create a "partitions" subnode and put the -partitions inside it. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 82 ++++++++++++---------- - 1 file changed, 44 insertions(+), 38 deletions(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -267,44 +267,50 @@ - /* 32MB of flash */ - reg = <0x30000000 0x02000000>; - -- /* -- * This "RedBoot" is the Storlink derivative. -- */ -- partition@0 { -- label = "RedBoot"; -- reg = <0x00000000 0x00040000>; -- read-only; -- }; -- /* -- * This firmware image contains the kernel catenated -- * with the squashfs root filesystem. For some reason -- * this is called "upgrade" on the vendor system. -- */ -- partition@40000 { -- label = "upgrade"; -- reg = <0x00040000 0x01f40000>; -- read-only; -- }; -- /* RGDB, Residental Gateway Database? */ -- partition@1f80000 { -- label = "rgdb"; -- reg = <0x01f80000 0x00040000>; -- read-only; -- }; -- /* -- * This partition contains MAC addresses for WAN, -- * WLAN and LAN, and the country code (for wireless -- * I guess). -- */ -- partition@1fc0000 { -- label = "nvram"; -- reg = <0x01fc0000 0x00020000>; -- read-only; -- }; -- partition@1fe0000 { -- label = "LangPack"; -- reg = <0x01fe0000 0x00020000>; -- read-only; -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ /* -+ * This "RedBoot" is the Storlink derivative. -+ */ -+ partition@0 { -+ label = "RedBoot"; -+ reg = <0x00000000 0x00040000>; -+ read-only; -+ }; -+ /* -+ * This firmware image contains the kernel catenated -+ * with the squashfs root filesystem. For some reason -+ * this is called "upgrade" on the vendor system. -+ */ -+ partition@40000 { -+ label = "upgrade"; -+ reg = <0x00040000 0x01f40000>; -+ read-only; -+ }; -+ /* RGDB, Residental Gateway Database? */ -+ partition@1f80000 { -+ label = "rgdb"; -+ reg = <0x01f80000 0x00040000>; -+ read-only; -+ }; -+ /* -+ * This partition contains MAC addresses for WAN, -+ * WLAN and LAN, and the country code (for wireless -+ * I guess). -+ */ -+ partition@1fc0000 { -+ label = "nvram"; -+ reg = <0x01fc0000 0x00020000>; -+ read-only; -+ }; -+ partition@1fe0000 { -+ label = "LangPack"; -+ reg = <0x01fe0000 0x00020000>; -+ read-only; -+ }; - }; - }; - diff --git a/target/linux/gemini/patches-4.19/0020-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-4.19/0020-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch deleted file mode 100644 index bb4076558d..0000000000 --- a/target/linux/gemini/patches-4.19/0020-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch +++ /dev/null @@ -1,35 +0,0 @@ -From 854934b0ce8e758ce581f5ddbc30e618ab46fbdb Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Mon, 11 Mar 2019 15:44:29 +0100 -Subject: [PATCH 2/2] ARM: dts: Augment DIR-685 partition table for OpenWrt - -Rename the firmware partition so that the firmware MTD -splitter will do its job, drop the rootfs arguments as -the MTD splitter will set this up automatically. - -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - arch/arm/boot/dts/gemini-dlink-dir-685.dts | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts -+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts -@@ -20,7 +20,7 @@ - }; - - chosen { -- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300"; -+ bootargs = "console=ttyS0,19200n8 consoleblank=300"; - stdout-path = "uart0:19200n8"; - }; - -@@ -286,7 +286,8 @@ - * this is called "upgrade" on the vendor system. - */ - partition@40000 { -- label = "upgrade"; -+ compatible = "wrg"; -+ label = "firmware"; - reg = <0x00040000 0x01f40000>; - read-only; - }; |