1 files changed, 0 insertions, 82 deletions
diff --git a/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch b/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch
deleted file mode 100644
index 8cab32200f..0000000000
--- a/target/linux/gemini/patches-4.14/0905-arm-dts-gemini-dlink-dir-685-add-rtl8366rb.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -87,6 +87,12 @@
- 		};
- 	};
- 
-+	rtl8366rb {
-+		compatible = "realtek,rtl8366rb";
-+		gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+		gpio-sck = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+	};
-+
- 	leds {
- 		compatible = "gpio-leds";
- 		led-wps {
-@@ -245,6 +251,47 @@
- 						groups = "gpio1bgrp";
- 					};
- 				};
-+				pinctrl-gmii {
-+					mux {
-+						function = "gmii";
-+						groups = "gmii_gmac0_grp";
-+					};
-+					conf0 {
-+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
-+						skew-delay = <0>;
-+					};
-+					conf1 {
-+						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
-+						skew-delay = <15>;
-+					};
-+					conf2 {
-+						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
-+						skew-delay = <7>;
-+					};
-+					conf3 {
-+						pins = "U8 GMAC0 TXC";
-+						skew-delay = <11>;
-+					};
-+					conf4 {
-+						pins = "V11 GMAC1 TXC";
-+						skew-delay = <10>;
-+					};
-+					conf5 {
-+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
-+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
-+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
-+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
-+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
-+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
-+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
-+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
-+						skew-delay = <7>;
-+					};
-+					conf6 {
-+						groups = "gmii_gmac0_grp";
-+						drive-strength = <16>;
-+					};
-+				};
- 			};
- 		};
- 
-@@ -286,6 +333,18 @@
- 				<0x6000 0 0 4 &pci_intc 2>;
- 		};
- 
-+		ethernet@60000000 {
-+			status = "okay";
-+
-+			ethernet-port@0 {
-+				phy-mode = "rgmii";
-+				// phy-handle = <&phy0>;
-+			};
-+			ethernet-port@1 {
-+				/* Not used in this platform */
-+			};
-+		};
-+
- 		ata@63000000 {
- 			status = "okay";
- 		};