diff options
Diffstat (limited to 'target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch')
| -rw-r--r-- | target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch | 272 |
1 files changed, 0 insertions, 272 deletions
diff --git a/target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch b/target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch deleted file mode 100644 index 3d2f4ed8a9..0000000000 --- a/target/linux/gemini/patches-4.14/0013-ARM-dts-Add-basic-devicetree-for-D-Link-DNS-313.patch +++ /dev/null @@ -1,272 +0,0 @@ -From 2f08de94f207a4347053e1faa22c9a310c9c61b0 Mon Sep 17 00:00:00 2001 -From: Linus Walleij <linus.walleij@linaro.org> -Date: Fri, 17 Nov 2017 16:36:32 +0100 -Subject: [PATCH 13/31] ARM: dts: Add basic devicetree for D-Link DNS-313 - -This adds a basic device tree for the D-Link DNS-313 -NAS enclosure. This device has a thermal sensor and a -fan so we add a thermal zone for the chassis in the -device tree based on information from the product. - -Reviewed-by: Andrew Lunn <andrew@lunn.ch> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/gemini-dlink-dns-313.dts | 241 +++++++++++++++++++++++++++++ - 2 files changed, 242 insertions(+) - create mode 100644 arch/arm/boot/dts/gemini-dlink-dns-313.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -185,6 +185,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ - exynos5800-peach-pi.dtb - dtb-$(CONFIG_ARCH_GEMINI) += \ - gemini-dlink-dir-685.dtb \ -+ gemini-dlink-dns-313.dtb \ - gemini-nas4220b.dtb \ - gemini-rut1xx.dtb \ - gemini-sq201.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts -@@ -0,0 +1,241 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure -+ */ -+ -+/dts-v1/; -+ -+#include "gemini.dtsi" -+#include <dt-bindings/input/input.h> -+#include <dt-bindings/thermal/thermal.h> -+ -+/ { -+ model = "D-Link DNS-313 1-Bay Network Storage Enclosure"; -+ compatible = "dlink,dns-313", "cortina,gemini"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ memory { -+ /* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */ -+ device_type = "memory"; -+ reg = <0x00000000 0x4000000>; -+ }; -+ -+ aliases { -+ mdio-gpio0 = &mdio0; -+ }; -+ -+ chosen { -+ stdout-path = "uart0:19200n8"; -+ }; -+ -+ gpio_keys { -+ compatible = "gpio-keys"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ button-esc { -+ debounce_interval = <50>; -+ wakeup-source; -+ linux,code = <KEY_ESC>; -+ label = "reset"; -+ gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ led-power { -+ label = "dns313:blue:power"; -+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ linux,default-trigger = "heartbeat"; -+ }; -+ led-disk-blue { -+ label = "dns313:blue:disk"; -+ gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; -+ default-state = "off"; -+ }; -+ led-disk-green { -+ label = "dns313:green:disk"; -+ gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; -+ default-state = "off"; -+ linux,default-trigger = "ide-disk"; -+ /* Ideally should activate while reading */ -+ }; -+ led-disk-red { -+ label = "dns313:red:disk"; -+ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; -+ default-state = "off"; -+ /* Ideally should activate while writing */ -+ }; -+ }; -+ -+ /* -+ * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM. -+ */ -+ fan0: gpio-fan { -+ compatible = "gpio-fan"; -+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, -+ <&gpio0 12 GPIO_ACTIVE_HIGH>; -+ gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>; -+ cooling-min-level = <0>; -+ cooling-max-level = <2>; -+ #cooling-cells = <2>; -+ }; -+ -+ -+ /* Global Mixed-Mode Technology G751 mounted on GPIO I2C */ -+ gpio-i2c { -+ compatible = "i2c-gpio"; -+ sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; -+ scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ g751: temperature-sensor@48 { -+ compatible = "gmt,g751"; -+ reg = <0x48>; -+ #thermal-sensor-cells = <0>; -+ }; -+ }; -+ -+ thermal-zones { -+ chassis-thermal { -+ /* Poll every 20 seconds */ -+ polling-delay = <20000>; -+ /* Poll every 2nd second when cooling */ -+ polling-delay-passive = <2000>; -+ -+ thermal-sensors = <&g751>; -+ -+ /* Tripping points from the fan.script in the rootfs */ -+ trips { -+ chassis_alert0: chassis-alert0 { -+ /* At 43 degrees turn on low speed */ -+ temperature = <43000>; -+ hysteresis = <3000>; -+ type = "active"; -+ }; -+ chassis_alert1: chassis-alert1 { -+ /* At 47 degrees turn on high speed */ -+ temperature = <47000>; -+ hysteresis = <3000>; -+ type = "active"; -+ }; -+ chassis_crit: chassis-crit { -+ /* Just shut down at 60 degrees */ -+ temperature = <60000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ }; -+ -+ cooling-maps { -+ map0 { -+ trip = <&chassis_alert0>; -+ cooling-device = <&fan0 1 1>; -+ }; -+ map1 { -+ trip = <&chassis_alert1>; -+ cooling-device = <&fan0 2 2>; -+ }; -+ }; -+ }; -+ }; -+ -+ mdio0: ethernet-phy { -+ compatible = "virtual,mdio-gpio"; -+ /* Uses MDC and MDIO */ -+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ -+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ /* This is a Realtek RTL8211B Gigabit ethernet transceiver */ -+ phy0: ethernet-phy@1 { -+ reg = <1>; -+ device_type = "ethernet-phy"; -+ }; -+ }; -+ -+ soc { -+ flash@30000000 { -+ status = "okay"; -+ /* 512KB of flash */ -+ reg = <0x30000000 0x00080000>; -+ -+ /* -+ * This "RedBoot" is the Storlink derivative. -+ */ -+ partition@0 { -+ label = "RedBoot"; -+ reg = <0x00000000 0x00040000>; -+ read-only; -+ }; -+ partition@40000 { -+ label = "MTD1"; -+ reg = <0x00040000 0x00020000>; -+ read-only; -+ }; -+ partition@60000 { -+ label = "MTD2"; -+ reg = <0x00060000 0x00020000>; -+ read-only; -+ }; -+ }; -+ -+ syscon: syscon@40000000 { -+ pinctrl { -+ /* -+ */ -+ gpio0_default_pins: pinctrl-gpio0 { -+ mux { -+ function = "gpio0"; -+ groups = -+ /* Used by LEDs conflicts ICE */ -+ "gpio0bgrp", -+ /* Used by ? conflicts ICE */ -+ "gpio0cgrp", -+ /* -+ * Used by fan & G751, conflicts LPC, -+ * UART modem lines, SSP -+ */ -+ "gpio0egrp", -+ /* Used by G751 */ -+ "gpio0fgrp", -+ /* Used by MDIO */ -+ "gpio0igrp"; -+ }; -+ }; -+ gpio1_default_pins: pinctrl-gpio1 { -+ mux { -+ function = "gpio1"; -+ /* Used by "reset" button */ -+ groups = "gpio1dgrp"; -+ }; -+ }; -+ }; -+ }; -+ -+ sata: sata@46000000 { -+ /* The ROM uses this muxmode */ -+ cortina,gemini-ata-muxmode = <3>; -+ cortina,gemini-enable-sata-bridge; -+ status = "okay"; -+ }; -+ -+ gpio0: gpio@4d000000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpio0_default_pins>; -+ }; -+ -+ gpio1: gpio@4e000000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&gpio1_default_pins>; -+ }; -+ -+ ata@63000000 { -+ status = "okay"; -+ }; -+ }; -+}; |