diff options
Diffstat (limited to 'target/linux/etrax/patches/cris')
20 files changed, 55664 insertions, 0 deletions
diff --git a/target/linux/etrax/patches/cris/001-include-cris.patch b/target/linux/etrax/patches/cris/001-include-cris.patch new file mode 100644 index 0000000000..f384684414 --- /dev/null +++ b/target/linux/etrax/patches/cris/001-include-cris.patch @@ -0,0 +1,4551 @@ +diff -urN linux-2.6.19.2.old/include/asm-cris/Kbuild linux-2.6.19.2.dev/include/asm-cris/Kbuild +--- linux-2.6.19.2.old/include/asm-cris/Kbuild 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/Kbuild 2007-02-09 16:51:34.000000000 +0100 +@@ -3,3 +3,6 @@ + header-y += arch-v10/ arch-v32/ + + unifdef-y += rs485.h ++unifdef-y += ethernet.h ++unifdef-y += etraxgpio.h ++unifdef-y += rtc.h +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/Kbuild linux-2.6.19.2.dev/include/asm-cris/arch-v10/Kbuild +--- linux-2.6.19.2.old/include/asm-cris/arch-v10/Kbuild 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/Kbuild 2007-02-26 21:03:05.000000000 +0100 +@@ -1,2 +1,5 @@ + header-y += ptrace.h + header-y += user.h ++header-y += svinto.h ++header-y += sv_addr_ag.h ++header-y += sv_addr.agh +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/bug.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/bug.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v10/bug.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/bug.h 2006-06-21 10:29:16.000000000 +0200 +@@ -0,0 +1,66 @@ ++#ifndef __ASM_CRIS_ARCH_BUG_H ++#define __ASM_CRIS_ARCH_BUG_H ++ ++#include <linux/stringify.h> ++ ++#ifdef CONFIG_BUG ++#ifdef CONFIG_DEBUG_BUGVERBOSE ++/* The BUG() macro is used for marking obviously incorrect code paths. ++ * It will cause a message with the file name and line number to be printed, ++ * and then cause an oops. The message is actually printed by handle_BUG() ++ * in arch/cris/kernel/traps.c, and the reason we use this method of storing ++ * the file name and line number is that we do not want to affect the registers ++ * by calling printk() before causing the oops. ++ */ ++ ++#define BUG_PREFIX 0x0D7F ++#define BUG_MAGIC 0x00001234 ++ ++struct bug_frame { ++ unsigned short prefix; ++ unsigned int magic; ++ unsigned short clear; ++ unsigned short movu; ++ unsigned short line; ++ unsigned short jump; ++ unsigned char* filename; ++}; ++ ++#if 0 ++/* Unfortunately this version of the macro does not work due to a problem ++ * with the compiler (aka a bug) when compiling with -O2, which sometimes ++ * erroneously causes the second input to be stored in a register... ++ */ ++#define BUG() \ ++ __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ ++ "movu.w %0,$r0\n\t" \ ++ "jump %1\n\t" \ ++ : : "i" (__LINE__), "i" (__FILE__)) ++#else ++/* This version will have to do for now, until the compiler is fixed. ++ * The drawbacks of this version are that the file name will appear multiple ++ * times in the .rodata section, and that __LINE__ and __FILE__ can probably ++ * not be used like this with newer versions of gcc. ++ */ ++#define BUG() \ ++ __asm__ __volatile__ ("clear.d [" __stringify(BUG_MAGIC) "]\n\t"\ ++ "movu.w " __stringify(__LINE__) ",$r0\n\t"\ ++ "jump 0f\n\t" \ ++ ".section .rodata\n" \ ++ "0:\t.string \"" __FILE__ "\"\n\t" \ ++ ".previous") ++#endif ++ ++#else ++ ++/* This just causes an oops. */ ++#define BUG() (*(int *)0 = 0) ++ ++#endif ++ ++#define HAVE_ARCH_BUG ++#endif ++ ++#include <asm-generic/bug.h> ++ ++#endif +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/ide.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/ide.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v10/ide.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/ide.h 2005-08-23 11:44:36.000000000 +0200 +@@ -32,7 +32,7 @@ + * together in a hwgroup, and will serialize accesses. this is good, because + * we can't access more than one interface at the same time on ETRAX100. + */ +- return 4; ++ return 4; + } + + static inline unsigned long ide_default_io_base(int index) +@@ -61,15 +61,15 @@ + /* fill in ports for ATA addresses 0 to 7 */ + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { +- hw->io_ports[i] = data_port | +- IO_FIELD(R_ATA_CTRL_DATA, addr, i) | ++ hw->io_ports[i] = data_port | ++ IO_FIELD(R_ATA_CTRL_DATA, addr, i) | + IO_STATE(R_ATA_CTRL_DATA, cs0, active); + } + + /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */ + + hw->io_ports[IDE_CONTROL_OFFSET] = data_port | +- IO_FIELD(R_ATA_CTRL_DATA, addr, 6) | ++ IO_FIELD(R_ATA_CTRL_DATA, addr, 6) | + IO_STATE(R_ATA_CTRL_DATA, cs1, active); + + /* whats this for ? */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/io.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/io.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v10/io.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/io.h 2007-03-06 12:16:16.000000000 +0100 +@@ -56,6 +56,9 @@ + #define LED_RED 0x02 + #define LED_ORANGE (LED_GREEN | LED_RED) + ++#if defined(CONFIG_ETRAX_NO_LEDS) ++#define LED_NETWORK_SET(x) ++#else + #if CONFIG_ETRAX_LED1G == CONFIG_ETRAX_LED1R + #define LED_NETWORK_SET(x) \ + do { \ +@@ -80,6 +83,7 @@ + LED_ACTIVE_SET_R((x) & LED_RED); \ + } while (0) + #endif ++#endif + + #ifdef CONFIG_ETRAX_PA_LEDS + #define LED_NETWORK_SET_G(x) \ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v10/juliette.h linux-2.6.19.2.dev/include/asm-cris/arch-v10/juliette.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v10/juliette.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v10/juliette.h 2004-06-03 11:28:57.000000000 +0200 +@@ -0,0 +1,328 @@ ++#ifndef _ASM_JULIETTE_H ++#define _ASM_JULIETTE_H ++ ++#include <asm/arch/svinto.h> ++ ++/* juliette _IOC_TYPE, bits 8 to 15 in ioctl cmd */ ++ ++#define JULIOCTYPE 42 ++ ++/* supported ioctl _IOC_NR's */ ++ ++#define JULSTARTDMA 0x1 /* start a picture asynchronously */ ++ ++/* set parameters */ ++ ++#define SETDEFAULT 0x2 /* CCD/VIDEO/SS1M */ ++#define SETPARAMETERS 0x3 /* CCD/VIDEO */ ++#define SETSIZE 0x4 /* CCD/VIDEO/SS1M */ ++#define SETCOMPRESSION 0x5 /* CCD/VIDEO/SS1M */ ++#define SETCOLORLEVEL 0x6 /* CCD/VIDEO */ ++#define SETBRIGHTNESS 0x7 /* CCD */ ++#define SETROTATION 0x8 /* CCD */ ++#define SETTEXT 0x9 /* CCD/VIDEO/SS1M */ ++#define SETCLOCK 0xa /* CCD/VIDEO/SS1M */ ++#define SETDATE 0xb /* CCD/VIDEO/SS1M */ ++#define SETTIMEFORMAT 0xc /* CCD/VIDEO/SS1M */ ++#define SETDATEFORMAT 0xd /* VIDEO */ ++#define SETTEXTALIGNMENT 0xe /* VIDEO */ ++#define SETFPS 0xf /* CCD/VIDEO/SS1M */ ++#define SETVGA 0xff /* VIDEO */ ++#define SETCOMMENT 0xfe /* CCD/VIDEO */ ++ ++/* get parameters */ ++ ++#define GETDRIVERTYPE 0x10 /* CCD/VIDEO/SS1M */ ++#define GETNBROFCAMERAS 0x11 /* CCD/VIDEO/SS1M */ ++#define GETPARAMETERS 0x12 /* CCD/VIDEO/SS1M */ ++#define GETBUFFERSIZE 0x13 /* CCD/VIDEO/SS1M */ ++#define GETVIDEOTYPE 0x14 /* VIDEO/SS1M */ ++#define GETVIDEOSIGNAL 0x15 /* VIDEO */ ++#define GETMODULATION 0x16 /* VIDEO */ ++#define GETDCYVALUES 0xa0 /* CCD /SS1M */ ++#define GETDCYWIDTH 0xa1 /* CCD /SS1M */ ++#define GETDCYHEIGHT 0xa2 /* CCD /SS1M */ ++#define GETSIZE 0xa3 /* CCD/VIDEO */ ++#define GETCOMPRESSION 0xa4 /* CCD/VIDEO */ ++ ++/* detect and get parameters */ ++ ++#define DETECTMODULATION 0x17 /* VIDEO */ ++#define DETECTVIDEOTYPE 0x18 /* VIDEO */ ++#define DETECTVIDEOSIGNAL 0x19 /* VIDEO */ ++ ++/* configure default parameters */ ++ ++#define CONFIGUREDEFAULT 0x20 /* CCD/VIDEO/SS1M */ ++#define DEFSIZE 0x21 /* CCD/VIDEO/SS1M */ ++#define DEFCOMPRESSION 0x22 /* CCD/VIDEO/SS1M */ ++#define DEFCOLORLEVEL 0x23 /* CCD/VIDEO */ ++#define DEFBRIGHTNESS 0x24 /* CCD */ ++#define DEFROTATION 0x25 /* CCD */ ++#define DEFWHITEBALANCE 0x26 /* CCD */ ++#define DEFEXPOSURE 0x27 /* CCD */ ++#define DEFAUTOEXPWINDOW 0x28 /* CCD */ ++#define DEFTEXT 0x29 /* CCD/VIDEO/SS1M */ ++#define DEFCLOCK 0x2a /* CCD/VIDEO/SS1M */ ++#define DEFDATE 0x2b /* CCD/VIDEO/SS1M */ ++#define DEFTIMEFORMAT 0x2c /* CCD/VIDEO/SS1M */ ++#define DEFDATEFORMAT 0x2d /* VIDEO */ ++#define DEFTEXTALIGNMENT 0x2e /* VIDEO */ ++#define DEFFPS 0x2f /* CCD/VIDEO/SS1M */ ++#define DEFTEXTSTRING 0x30 /* CCD/VIDEO/SS1M */ ++#define DEFHEADERINFO 0x31 /* CCD/VIDEO/SS1M */ ++#define DEFWEXAR 0x32 /* CCD */ ++#define DEFLINEDELAY 0x33 /* CCD */ ++#define DEFDISABLEDVIDEO 0x34 /* VIDEO */ ++#define DEFVIDEOTYPE 0x35 /* VIDEO */ ++#define DEFMODULATION 0x36 /* VIDEO */ ++#define DEFXOFFSET 0x37 /* VIDEO */ ++#define DEFYOFFSET 0x38 /* VIDEO */ ++#define DEFYCMODE 0x39 /* VIDEO */ ++#define DEFVCRMODE 0x3a /* VIDEO */ ++#define DEFSTOREDCYVALUES 0x3b /* CCD/VIDEO/SS1M */ ++#define DEFWCDS 0x3c /* CCD */ ++#define DEFVGA 0x3d /* VIDEO */ ++#define DEFCOMMENT 0x3e /* CCD/VIDEO */ ++#define DEFCOMMENTSIZE 0x3f /* CCD/VIDEO */ ++#define DEFCOMMENTTEXT 0x50 /* CCD/VIDEO */ ++#define DEFSTOREDCYTEXT 0x51 /* VIDEO */ ++ ++ ++#define JULABORTDMA 0x70 /* Abort current DMA transfer */ ++ ++/* juliette general i/o port */ ++ ++#define JIO_READBITS 0x40 /* read and return current port bits */ ++#define JIO_SETBITS 0x41 /* set bits marked by 1 in the argument */ ++#define JIO_CLRBITS 0x42 /* clr bits marked by 1 in the argument */ ++#define JIO_READDIR 0x43 /* read direction, 0=input 1=output */ ++#define JIO_SETINPUT 0x44 /* set direction, 0=unchanged 1=input ++ returns current dir */ ++#define JIO_SETOUTPUT 0x45 /* set direction, 0=unchanged 1=output ++ returns current dir */ ++ ++/**** YumYum internal adresses ****/ ++ ++/* Juliette buffer addresses */ ++ ++#define BUFFER1_VIDEO 0x1100 ++#define BUFFER2_VIDEO 0x2800 ++#define ACDC_BUFF_VIDEO 0x0aaa ++#define BUFFER1 0x1700 ++#define BUFFER2 0x2b01 ++#define ACDC_BUFFER 0x1200 ++#define BUFFER1_SS1M 0x1100 ++#define BUFFER2_SS1M 0x2800 ++#define ACDC_BUFF_SS1M 0x0900 ++ ++/* Juliette parameter memory addresses */ ++ ++#define PA_BUFFER_CNT 0x3f09 /* CCD/VIDEO */ ++#define PA_CCD_BUFFER 0x3f10 /* CCD */ ++#define PA_VIDEO_BUFFER 0x3f10 /* VIDEO */ ++#define PA_DCT_BUFFER 0x3f11 /* CCD/VIDEO */ ++#define PA_TEMP 0x3f12 /* CCD/VIDEO */ ++#define PA_VIDEOLINE_RD 0x3f13 /* VIDEO */ ++#define PA_VIDEOLINE_WR 0x3f14 /* VIDEO */ ++#define PA_VI_HDELAY0 0x3f15 /* VIDEO */ ++#define PA_VI_VDELAY0 0x3f16 /* VIDEO */ ++#define PA_VI_HDELAY1 0x3f17 /* VIDEO */ ++#define PA_VI_VDELAY1 0x3f18 /* VIDEO */ ++#define PA_VI_HDELAY2 0x3f19 /* VIDEO */ ++#define PA_VI_VDELAY2 0x3f1a /* VIDEO */ ++#define PA_VI_HDELAY3 0x3f1b /* VIDEO */ ++#define PA_VI_VDELAY3 0x3f1c /* VIDEO */ ++#define PA_VI_CTRL 0x3f20 /* VIDEO */ ++#define PA_JPEG_CTRL 0x3f22 /* CCD/VIDEO */ ++#define PA_BUFFER_SIZE 0x3f24 /* CCD/VIDEO */ ++#define PA_PAL_NTSC 0x3f25 /* VIDEO */ ++#define PA_MACROBLOCKS 0x3f26 /* CCD/VIDEO */ ++#define PA_COLOR 0x3f27 /* VIDEO */ ++#define PA_MEMCH1CNT2 0x3f28 /* CCD/VIDEO */ ++#define PA_MEMCH1CNT3 0x3f29 /* VIDEO */ ++#define PA_MEMCH1STR2 0x3f2a /* CCD/VIDEO */ ++#define PA_MEMCH1STR3 0x3f2b /* VIDEO */ ++#define PA_BUFFERS 0x3f2c /* CCD/VIDEO */ ++#define PA_PROGRAM 0x3f2d /* CCD/VIDEO */ ++#define PA_ROTATION 0x3f2e /* CCD */ ++#define PA_PC 0x3f30 /* CCD/VIDEO */ ++#define PA_PC2 0x3f31 /* VIDEO */ ++#define PA_ODD_LINE 0x3f32 /* VIDEO */ ++#define PA_EXP_DELAY 0x3f34 /* CCD */ ++#define PA_MACROBLOCK_CNT 0x3f35 /* CCD/VIDEO */ ++#define PA_DRAM_PTR1_L 0x3f36 /* CCD/VIDEO */ ++#define PA_CLPOB_CNT 0x3f37 /* CCD */ ++#define PA_DRAM_PTR1_H 0x3f38 /* CCD/VIDEO */ ++#define PA_DRAM_PTR2_L 0x3f3a /* VIDEO */ ++#define PA_DRAM_PTR2_H 0x3f3c /* VIDEO */ ++#define PA_CCD_LINE_CNT 0x3f3f /* CCD */ ++#define PA_VIDEO_LINE_CNT 0x3f3f /* VIDEO */ ++#define PA_TEXT 0x3f41 /* CCD/VIDEO */ ++#define PA_CAMERA_CHANGED 0x3f42 /* VIDEO */ ++#define PA_TEXTALIGNMENT 0x3f43 /* VIDEO */ ++#define PA_DISABLED 0x3f44 /* VIDEO */ ++#define PA_MACROBLOCKTEXT 0x3f45 /* VIDEO */ ++#define PA_VGA 0x3f46 /* VIDEO */ ++#define PA_ZERO 0x3ffe /* VIDEO */ ++#define PA_NULL 0x3fff /* CCD/VIDEO */ ++ ++typedef enum { ++ jpeg = 0, ++ dummy = 1 ++} request_type; ++ ++typedef enum { ++ hugesize = 0, ++ fullsize = 1, ++ halfsize = 2, ++ fieldsize = 3 ++} size_type; ++ ++typedef enum { ++ min = 0, ++ low = 1, ++ medium = 2, ++ high = 3, ++ very_high = 4, ++ very_low = 5, ++ q1 = 6, ++ q2 = 7, ++ q3 = 8, ++ q4 = 9, ++ q5 = 10, ++ q6 = 11 ++} compr_type; ++ ++typedef enum { ++ deg_0 = 0, ++ deg_180 = 1, ++ deg_90 = 2, ++ deg_270 = 3 ++} rotation_type; ++ ++typedef enum { ++ auto_white = 0, ++ hold = 1, ++ fixed_outdoor = 2, ++ fixed_indoor = 3, ++ fixed_fluor = 4 ++} white_balance_type; ++ ++typedef enum { ++ auto_exp = 0, ++ fixed_exp = 1 ++} exposure_type; ++ ++typedef enum { ++ no_window = 0, ++ center = 1, ++ top = 2, ++ lower = 3, ++ left = 4, ++ right = 5, ++ spot = 6, ++ cw = 7 ++} exp_window_type; ++ ++typedef enum { ++ h_24 = 0, ++ h_12 = 1, ++ h_24P = 2 ++} hour_type; ++ ++typedef enum { ++ standard = 0, ++ YYYY_MM_DD = 1, ++ Www_Mmm_DD_YYYY = 2, ++ Www_DD_MM_YYYY = 3 ++} date_type; ++ ++typedef enum { ++ left_align = 0, ++ center_align = 1, ++ right_align = 2 ++} alignment_type; ++ ++typedef enum { ++ off = 0, ++ on = 1, ++ no = 0, ++ yes = 1 ++} enable_type; ++ ++typedef enum { ++ disabled = 0, ++ enabled = 1, ++ extended = 2 ++} comment_type; ++ ++typedef enum { ++ pal = 0, ++ ntsc = 1 ++} video_type; ++ ++typedef enum { ++ pal_bghi_ntsc_m = 0, ++ ntsc_4_43_50hz_pal_4_43_60hz = 1, ++ pal_n_ntsc_4_43_60hz = 2, ++ ntsc_n_pal_m = 3, ++ secam_pal_4_43_60hz = 4 ++} modulation_type; ++ ++typedef enum { ++ cam0 = 0, ++ cam1 = 1, ++ cam2 = 2, ++ cam3 = 3, ++ quad = 32 ++} camera_type; ++ ++typedef enum { ++ video_driver = 0, ++ ccd_driver = 1 ++} driver_type; ++ ++struct jul_param { ++ request_type req_type; ++ size_type size; ++ compr_type compression; ++ rotation_type rotation; ++ int color_level; ++ int brightness; ++ white_balance_type white_balance; ++ exposure_type exposure; ++ exp_window_type auto_exp_window; ++ hour_type time_format; ++ date_type date_format; ++ alignment_type text_alignment; ++ enable_type text; ++ enable_type clock; ++ enable_type date; ++ enable_type fps; ++ enable_type vga; ++ enable_type comment; ++}; ++ ++struct video_param { ++ enable_type disabled; ++ modulation_type modulation; ++ video_type video; ++ enable_type signal; ++ enable_type vcr; ++ int xoffset; ++ int yoffset; ++}; ++ ++/* The juliette_request structure is used during the JULSTARTDMA asynchronous ++ * picture-taking ioctl call as an argument to specify a buffer which will get ++ * the final picture. ++ */ ++ ++struct juliette_request { ++ char *buf; /* Pointer to the buffer to hold picture data */ ++ unsigned int buflen; /* Length of the above buffer */ ++ unsigned int size; /* Resulting length, 0 if the picture is not ready */ ++}; ++ ++#endif +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/Kbuild linux-2.6.19.2.dev/include/asm-cris/arch-v32/Kbuild +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/Kbuild 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/Kbuild 2007-02-09 16:51:34.000000000 +0100 +@@ -1,2 +1,3 @@ + header-y += ptrace.h + header-y += user.h ++header-y += cryptocop.h +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/arbiter.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/arbiter.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/arbiter.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/arbiter.h 2006-10-13 14:45:18.000000000 +0200 +@@ -22,6 +22,7 @@ + + int crisv32_arbiter_allocate_bandwidth(int client, int region, + unsigned long bandwidth); ++void crisv32_arbiter_deallocate_bandwidth(int client, int region); + int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback* cb); +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/bitops.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/bitops.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/bitops.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/bitops.h 2005-08-23 11:44:37.000000000 +0200 +@@ -16,7 +16,7 @@ + __asm__ __volatile__ ("swapnwbr %0\n\t" + "lz %0,%0" + : "=r" (res) : "0" (w)); +- ++ + return res; + } + +@@ -28,7 +28,7 @@ + __asm__ __volatile__ ("swapwbr %0\n\t" + "lz %0,%0" + : "=r" (res) : "0" (w)); +- ++ + return res; + } + +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/board.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/board.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/board.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/board.h 2007-01-29 15:05:01.000000000 +0100 +@@ -0,0 +1,74 @@ ++/* ++ * linux/include/asm-cris/arch-v32/board.h ++ * ++ * Types for board-specific data. ++ * ++ * Copyright (C) 2007 Axis Communications AB ++ */ ++ ++#ifndef __ARCH_V32_BOARD_H ++#define __ARCH_V32_BOARD_H ++ ++/* A tuple for a regi base and an interrupt. */ ++struct crisv32_regi_n_int { ++ u32 regi; ++ u32 irq; ++}; ++ ++/* ++ * SPI and SD/MMC types, arranged such that the data for mmc_spi is an ++ * add-on to SPI; the SPI data does not contain anything about SD/MMC ++ * and the SPI controller driver can't access it. SPI data is ++ * arranged to allow sharing common functions between SSER and GPIO. ++ */ ++ ++/* Hardware identification for the bitbanged GPIO SPI controller. */ ++struct crisv32_spi_gpio_controller_data { ++ /* Names of the pins. */ ++ const char *cs; ++ const char *miso; ++ const char *mosi; ++ const char *sclk; ++}; ++ ++/* Similar for the SSER SPI controller. */ ++struct crisv32_spi_sser_controller_data { ++ /* How to connect pins and claim the SSER interface and the DMA ++ channels. */ ++ int (*iface_allocate)(struct crisv32_regi_n_int *sser, ++ struct crisv32_regi_n_int *dmain, ++ struct crisv32_regi_n_int *dmaout); ++ void (*iface_free)(void); ++ ++ /* Whether DMA is to be used. */ ++ int using_dma; ++}; ++ ++struct crisv32_mmc_spi_pinstate; ++ ++/* ++ * Regardless of SPI controller, these pins are needed in addition to ++ * the SPI pins when the used as a SD/MMC SPI controller. ++ */ ++struct crisv32_mmc_spi_pindata { ++ /* Names of the pins. */ ++ const char *card_detect; ++ const char *write_protect; ++ ++ /* Related private state to interface to the mmc_spi API. */ ++ struct crisv32_mmc_spi_pinstate *pinstate; ++}; ++ ++/* When SD/MMC SPI on GPIO, here's all the hardware-identifying data. */ ++struct crisv32_mmc_spi_gpio_hwdata { ++ struct crisv32_spi_gpio_controller_data spi; ++ struct crisv32_mmc_spi_pindata mmc; ++}; ++ ++/* Similar for SSER. */ ++struct crisv32_mmc_spi_sser_hwdata { ++ struct crisv32_spi_sser_controller_data spi; ++ struct crisv32_mmc_spi_pindata mmc; ++}; ++ ++#endif /* __ARCH_V32_BOARD_H */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/bug.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/bug.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/bug.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/bug.h 2006-06-21 10:29:16.000000000 +0200 +@@ -0,0 +1,69 @@ ++#ifndef __ASM_CRIS_ARCH_BUG_H ++#define __ASM_CRIS_ARCH_BUG_H ++ ++#include <linux/stringify.h> ++ ++#ifdef CONFIG_BUG ++#ifdef CONFIG_DEBUG_BUGVERBOSE ++/* The BUG() macro is used for marking obviously incorrect code paths. ++ * It will cause a message with the file name and line number to be printed, ++ * and then cause an oops. The message is actually printed by handle_BUG() ++ * in arch/cris/kernel/traps.c, and the reason we use this method of storing ++ * the file name and line number is that we do not want to affect the registers ++ * by calling printk() before causing the oops (this is not entirely true ++ * for CRISv32 since we need to modify the $acr register). ++ */ ++ ++#define BUG_PREFIX 0xFE6F ++#define BUG_MAGIC 0x00001234 ++ ++struct bug_frame { ++ unsigned short prefix; ++ unsigned int magic; ++ unsigned short clear; ++ unsigned short movu; ++ unsigned short line; ++ unsigned short jump; ++ unsigned char* filename; ++}; ++ ++#if 0 ++/* Unfortunately this version of the macro does not work due to a problem ++ * with the compiler (aka a bug) when compiling with -O2, which sometimes ++ * erroneously causes the second input to be stored in a register... ++ */ ++#define BUG() \ ++ __asm__ __volatile__ ("move.d [" __stringify(BUG_MAGIC) "],$acr\n\t"\ ++ "clear.d [$acr]\n\t" \ ++ "movu.w %0,$r0\n\t" \ ++ "jump %1\n\t" \ ++ : : "i" (__LINE__), "i" (__FILE__)) ++#else ++/* This version will have to do for now, until the compiler is fixed. ++ * The drawbacks of this version are that the file name will appear multiple ++ * times in the .rodata section, and that __LINE__ and __FILE__ can probably ++ * not be used like this with newer versions of gcc. ++ */ ++#define BUG() \ ++ __asm__ __volatile__ ("move.d " __stringify(BUG_MAGIC) ",$acr\n\t"\ ++ "clear.d [$acr]\n\t" \ ++ "movu.w " __stringify(__LINE__) ",$r0\n\t"\ ++ "jump 0f\n\t" \ ++ ".section .rodata\n" \ ++ "0:\t.string \"" __FILE__ "\"\n\t" \ ++ ".previous") ++#endif ++ ++#else ++ ++/* This just causes an oops. */ ++#define BUG() (*(int *)0 = 0) ++ ++#endif ++ ++#define HAVE_ARCH_BUG ++#endif ++ ++#include <asm-generic/bug.h> ++ ++#endif +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/cache.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/cache.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/cache.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/cache.h 2007-01-05 09:59:53.000000000 +0100 +@@ -1,8 +1,19 @@ + #ifndef _ASM_CRIS_ARCH_CACHE_H + #define _ASM_CRIS_ARCH_CACHE_H + ++#include <asm/arch/hwregs/dma.h> ++ + /* A cache-line is 32 bytes. */ + #define L1_CACHE_BYTES 32 + #define L1_CACHE_SHIFT 5 + ++void flush_dma_list(dma_descr_data* descr); ++void flush_dma_descr(dma_descr_data* descr, int flush_buf); ++ ++#define flush_dma_context(c) \ ++ flush_dma_list(phys_to_virt((c)->saved_data)); ++ ++void cris_flush_cache_range(void* buf, unsigned long len); ++void cris_flush_cache(void); ++ + #endif /* _ASM_CRIS_ARCH_CACHE_H */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/cryptocop.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/cryptocop.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/cryptocop.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/cryptocop.h 2005-04-20 14:33:25.000000000 +0200 +@@ -160,7 +160,7 @@ + cryptocop_source_dma = 0, + cryptocop_source_des, + cryptocop_source_3des, +- cryptocop_source_aes, ++ cryptocop_source_aes, + cryptocop_source_md5, + cryptocop_source_sha1, + cryptocop_source_csum, +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/delay.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/delay.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/delay.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/delay.h 2006-10-11 19:46:19.000000000 +0200 +@@ -1,6 +1,16 @@ + #ifndef _ASM_CRIS_ARCH_DELAY_H + #define _ASM_CRIS_ARCH_DELAY_H + ++extern void cris_delay10ns(u32 n10ns); ++#define udelay(u) cris_delay10ns((u)*100) ++#define ndelay(n) cris_delay10ns(((n)+9)/10) ++ ++/* ++ * Not used anymore for udelay or ndelay. Referenced by ++ * e.g. init/calibrate.c. All other references are likely bugs; ++ * should be replaced by mdelay, udelay or ndelay. ++ */ ++ + static inline void + __delay(int loops) + { +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/dma.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/dma.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/dma.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/dma.h 2005-05-02 12:43:02.000000000 +0200 +@@ -67,7 +67,7 @@ + dma_ext3 + }; + +-int crisv32_request_dma(unsigned int dmanr, const char * device_id, ++int crisv32_request_dma(unsigned int dmanr, const char * device_id, + unsigned options, unsigned bandwidth, enum dma_owner owner); + void crisv32_free_dma(unsigned int dmanr); + +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/Makefile linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/Makefile +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/Makefile 2004-01-07 22:16:18.000000000 +0100 +@@ -126,9 +126,9 @@ + + # From /n/asic/projects/guinness/design/ + reg_map.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap +- $(RDES2C) -base 0xb0000000 $^ ++ $(RDES2C) -base 0xb0000000 $^ + reg_map_asm.h: $(DESIGNDIR)/top/rtl/global.rmap $(DESIGNDIR)/top/mod/modreg.rmap +- $(RDES2C) -base 0xb0000000 -asm -outfile $@ $^ ++ $(RDES2C) -base 0xb0000000 -asm -outfile $@ $^ + + reg_rdwr.h: $(DESIGNDIR)/top/sw/include/reg_rdwr.h + cat $< | sed -e 's/\$$Id\:/id\:/g' >$@ +@@ -171,14 +171,14 @@ + done + + .PHONY: axw +-## %.axw - Generate the specified .axw file (doesn't work for all files ++## %.axw - Generate the specified .axw file (doesn't work for all files + ## due to inconsistent naming ir .r files. + %.axw: axw + @for RDES in $(REGDESC); do \ + if echo "$$RDES" | grep $* ; then \ + $(RDES2TXT) $$RDES; \ + fi \ +- done ++ done + + .PHONY: clean + ## clean - Remove .h files and .axw files. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ata_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/ata/rtl/ata_regs.r +- * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp ++ * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp + * last modfied: Mon Apr 11 16:06:25 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ata_defs_asm.h ../../inst/ata/rtl/ata_regs.r + * id: $Id: ata_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_core_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r +- * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp ++ * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_core_defs_asm.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_dma_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_dma_regs.r +- * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp ++ * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp + * last modfied: Mon Apr 11 16:06:33 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_dma_defs_asm.h ../../inst/bif/rtl/bif_dma_regs.r + * id: $Id: bif_dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/bif_slave_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_slave_regs.r +- * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp ++ * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp + * last modfied: Mon Apr 11 16:06:34 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/bif_slave_defs_asm.h ../../inst/bif/rtl/bif_slave_regs.r + * id: $Id: bif_slave_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/config_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../rtl/config_regs.r +- * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp ++ * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/config_defs_asm.h ../../rtl/config_regs.r + * id: $Id: config_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cpu_vect.h 2005-04-24 20:31:04.000000000 +0200 +@@ -3,7 +3,7 @@ + version . */ + + #ifndef _______INST_CRISP_DOC_CPU_VECT_R +-#define _______INST_CRISP_DOC_CPU_VECT_R ++#define _______INST_CRISP_DOC_CPU_VECT_R + #define NMI_INTR_VECT 0x00 + #define RESERVED_1_INTR_VECT 0x01 + #define RESERVED_2_INTR_VECT 0x02 +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/cris_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/crisp/doc/cris.r +- * id: cris.r,v 1.6 2004/05/05 07:41:12 perz Exp ++ * id: cris.r,v 1.6 2004/05/05 07:41:12 perz Exp + * last modfied: Mon Apr 11 16:06:39 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/cris_defs_asm.h ../../inst/crisp/doc/cris.r + * id: $Id: cris_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/dma_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r +- * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp ++ * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp + * last modfied: Mon Apr 11 16:06:51 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/dma_defs_asm.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r + * id: $Id: dma_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/eth_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/eth/rtl/eth_regs.r +- * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp ++ * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp + * last modfied: Mon Apr 11 16:07:03 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/eth_defs_asm.h ../../inst/eth/rtl/eth_regs.r + * id: $Id: eth_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/gio_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r +- * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp ++ * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/gio_defs_asm.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect.h 2005-04-24 20:31:04.000000000 +0200 +@@ -3,7 +3,7 @@ + version . */ + + #ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +-#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R ++#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R + #define MEMARB_INTR_VECT 0x31 + #define GEN_IO_INTR_VECT 0x32 + #define IOP0_INTR_VECT 0x33 +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/intr_vect_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r +- * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp ++ * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp + * last modfied: Mon Apr 11 16:08:03 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/intr_vect_defs_asm.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r + * id: $Id: intr_vect_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/irq_nmi_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../mod/irq_nmi.r + * id: <not found> + * last modfied: Thu Jan 22 09:22:43 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/irq_nmi_defs_asm.h ../../mod/irq_nmi.r + * id: $Id: irq_nmi_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/marb_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Mon Apr 11 16:12:16 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +@@ -313,7 +313,7 @@ + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Mon Apr 11 16:12:16 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/marb_defs_asm.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/mmu_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/mmu/doc/mmu_regs.r +- * id: mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp ++ * id: mmu_regs.r,v 1.12 2004/05/06 13:48:45 mikaeln Exp + * last modfied: Mon Apr 11 17:03:20 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/mmu_defs_asm.h ../../inst/mmu/doc/mmu_regs.r + * id: $Id: mmu_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/pinmux_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r +- * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp ++ * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp + * last modfied: Mon Apr 11 16:09:11 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/pinmux_defs_asm.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: $Id: pinmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/reg_map_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,17 +4,17 @@ + /* + * This file is autogenerated from + * file: ../../mod/fakereg.rmap +- * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp ++ * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp + * last modified: Wed Feb 11 20:53:25 2004 + * file: ../../rtl/global.rmap +- * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp ++ * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp + * last modified: Mon Aug 18 17:08:23 2003 + * file: ../../mod/modreg.rmap +- * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp ++ * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp + * last modified: Fri Feb 20 16:40:04 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/reg_map_asm.h -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap +- * id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ ++ * id: $Id: reg_map_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/rt_trace_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/rt_trace/rtl/rt_regs.r +- * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp ++ * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp + * last modfied: Mon Apr 11 16:09:14 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/rt_trace_defs_asm.h ../../inst/rt_trace/rtl/rt_regs.r + * id: $Id: rt_trace_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/ser_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/ser/rtl/ser_regs.r +- * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp ++ * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp + * last modfied: Mon Apr 11 16:09:21 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/ser_defs_asm.h ../../inst/ser/rtl/ser_regs.r + * id: $Id: ser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/sser_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/syncser/rtl/sser_regs.r +- * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp ++ * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp + * last modfied: Mon Apr 11 16:09:48 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/sser_defs_asm.h ../../inst/syncser/rtl/sser_regs.r + * id: $Id: sser_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strcop_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/strcop/rtl/strcop_regs.r +- * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp ++ * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp + * last modfied: Mon Apr 11 16:09:38 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strcop_defs_asm.h ../../inst/strcop/rtl/strcop_regs.r + * id: $Id: strcop_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/strmux_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/strmux/rtl/guinness/strmux_regs.r +- * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp ++ * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp + * last modfied: Mon Apr 11 16:09:43 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/strmux_defs_asm.h ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: $Id: strmux_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/asm/timer_defs_asm.h 2005-04-24 20:31:04.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/timer/rtl/timer_regs.r +- * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp ++ * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * last modfied: Mon Apr 11 16:09:53 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/timer_defs_asm.h ../../inst/timer/rtl/timer_regs.r + * id: $Id: timer_defs_asm.h,v 1.1 2005/04/24 18:31:04 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ata_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ata_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ata_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ata_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/ata/rtl/ata_regs.r +- * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp ++ * id: ata_regs.r,v 1.11 2005/02/09 08:27:36 kriskn Exp + * last modfied: Mon Apr 11 16:06:25 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ata_defs.h ../../inst/ata/rtl/ata_regs.r + * id: $Id: ata_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_core_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_core_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_core_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_core_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_core_regs.r +- * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp ++ * id: bif_core_regs.r,v 1.17 2005/02/04 13:28:22 np Exp + * last modfied: Mon Apr 11 16:06:33 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_core_defs.h ../../inst/bif/rtl/bif_core_regs.r + * id: $Id: bif_core_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_dma_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_dma_regs.r +- * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp ++ * id: bif_dma_regs.r,v 1.6 2005/02/04 13:28:31 perz Exp + * last modfied: Mon Apr 11 16:06:33 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_dma_defs.h ../../inst/bif/rtl/bif_dma_regs.r + * id: $Id: bif_dma_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/bif_slave_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/bif/rtl/bif_slave_regs.r +- * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp ++ * id: bif_slave_regs.r,v 1.5 2005/02/04 13:55:28 perz Exp + * last modfied: Mon Apr 11 16:06:34 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile bif_slave_defs.h ../../inst/bif/rtl/bif_slave_regs.r + * id: $Id: bif_slave_defs.h,v 1.2 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/config_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/config_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/config_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/config_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../rtl/config_regs.r +- * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp ++ * id: config_regs.r,v 1.23 2004/03/04 11:34:42 mikaeln Exp + * last modfied: Thu Mar 4 12:34:39 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile config_defs.h ../../rtl/config_regs.r + * id: $Id: config_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/cpu_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/cpu_vect.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/cpu_vect.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/cpu_vect.h 2005-04-24 20:30:58.000000000 +0200 +@@ -3,7 +3,7 @@ + version . */ + + #ifndef _______INST_CRISP_DOC_CPU_VECT_R +-#define _______INST_CRISP_DOC_CPU_VECT_R ++#define _______INST_CRISP_DOC_CPU_VECT_R + #define NMI_INTR_VECT 0x00 + #define RESERVED_1_INTR_VECT 0x01 + #define RESERVED_2_INTR_VECT 0x02 +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma.h 2006-06-25 17:01:59.000000000 +0200 +@@ -1,6 +1,6 @@ +-/* $Id: dma.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ ++/* $Id: dma.h,v 1.8 2006/06/25 15:01:59 starvik Exp $ + * +- * DMA C definitions and help macros ++ * DMA C definitions and help macros + * + */ + +@@ -98,10 +98,10 @@ + + // give stream command + #define DMA_WR_CMD( inst, cmd_par ) \ +- do { reg_dma_rw_stream_cmd r = {0}; \ +- do { r = REG_RD( dma, inst, rw_stream_cmd ); } while( r.busy ); \ +- r.cmd = (cmd_par); \ +- REG_WR( dma, inst, rw_stream_cmd, r ); \ ++ do { reg_dma_rw_stream_cmd __x = {0}; \ ++ do { __x = REG_RD( dma, inst, rw_stream_cmd ); } while( __x.busy ); \ ++ __x.cmd = (cmd_par); \ ++ REG_WR( dma, inst, rw_stream_cmd, __x ); \ + } while( 0 ) + + // load: g,c,d:burst +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/dma_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/dma_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/dma/inst/dma_common/rtl/dma_regdes.r +- * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp ++ * id: dma_regdes.r,v 1.39 2005/02/10 14:07:23 janb Exp + * last modfied: Mon Apr 11 16:06:51 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile dma_defs.h ../../inst/dma/inst/dma_common/rtl/dma_regdes.r + * id: $Id: dma_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs.h 2006-01-26 14:45:30.000000000 +0100 +@@ -3,12 +3,12 @@ + + /* + * This file is autogenerated from +- * file: ../../inst/eth/rtl/eth_regs.r +- * id: eth_regs.r,v 1.11 2005/02/09 10:48:38 kriskn Exp +- * last modfied: Mon Apr 11 16:07:03 2005 +- * +- * by /n/asic/design/tools/rdesc/src/rdes2c --outfile eth_defs.h ../../inst/eth/rtl/eth_regs.r +- * id: $Id: eth_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ ++ * file: eth.r ++ * id: eth_regs.r,v 1.16 2005/05/20 15:41:22 perz Exp ++ * last modfied: Mon Jan 9 06:06:41 2006 ++ * ++ * by /n/asic/design/tools/rdesc/rdes2c eth.r ++ * id: $Id: eth_defs.h,v 1.7 2006/01/26 13:45:30 karljope Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- +@@ -116,26 +116,28 @@ + + /* Register rw_ga_lo, scope eth, type rw */ + typedef struct { +- unsigned int table : 32; ++ unsigned int tbl : 32; + } reg_eth_rw_ga_lo; + #define REG_RD_ADDR_eth_rw_ga_lo 16 + #define REG_WR_ADDR_eth_rw_ga_lo 16 + + /* Register rw_ga_hi, scope eth, type rw */ + typedef struct { +- unsigned int table : 32; ++ unsigned int tbl : 32; + } reg_eth_rw_ga_hi; + #define REG_RD_ADDR_eth_rw_ga_hi 20 + #define REG_WR_ADDR_eth_rw_ga_hi 20 + + /* Register rw_gen_ctrl, scope eth, type rw */ + typedef struct { +- unsigned int en : 1; +- unsigned int phy : 2; +- unsigned int protocol : 1; +- unsigned int loopback : 1; +- unsigned int flow_ctrl_dis : 1; +- unsigned int dummy1 : 26; ++ unsigned int en : 1; ++ unsigned int phy : 2; ++ unsigned int protocol : 1; ++ unsigned int loopback : 1; ++ unsigned int flow_ctrl : 1; ++ unsigned int gtxclk_out : 1; ++ unsigned int phyrst_n : 1; ++ unsigned int dummy1 : 24; + } reg_eth_rw_gen_ctrl; + #define REG_RD_ADDR_eth_rw_gen_ctrl 24 + #define REG_WR_ADDR_eth_rw_gen_ctrl 24 +@@ -150,22 +152,23 @@ + unsigned int oversize : 1; + unsigned int bad_crc : 1; + unsigned int duplex : 1; +- unsigned int max_size : 1; +- unsigned int dummy1 : 23; ++ unsigned int max_size : 16; ++ unsigned int dummy1 : 8; + } reg_eth_rw_rec_ctrl; + #define REG_RD_ADDR_eth_rw_rec_ctrl 28 + #define REG_WR_ADDR_eth_rw_rec_ctrl 28 + + /* Register rw_tr_ctrl, scope eth, type rw */ + typedef struct { +- unsigned int crc : 1; +- unsigned int pad : 1; +- unsigned int retry : 1; +- unsigned int ignore_col : 1; +- unsigned int cancel : 1; +- unsigned int hsh_delay : 1; +- unsigned int ignore_crs : 1; +- unsigned int dummy1 : 25; ++ unsigned int crc : 1; ++ unsigned int pad : 1; ++ unsigned int retry : 1; ++ unsigned int ignore_col : 1; ++ unsigned int cancel : 1; ++ unsigned int hsh_delay : 1; ++ unsigned int ignore_crs : 1; ++ unsigned int carrier_ext : 1; ++ unsigned int dummy1 : 24; + } reg_eth_rw_tr_ctrl; + #define REG_RD_ADDR_eth_rw_tr_ctrl 32 + #define REG_WR_ADDR_eth_rw_tr_ctrl 32 +@@ -180,13 +183,10 @@ + + /* Register rw_mgm_ctrl, scope eth, type rw */ + typedef struct { +- unsigned int mdio : 1; +- unsigned int mdoe : 1; +- unsigned int mdc : 1; +- unsigned int phyclk : 1; +- unsigned int txdata : 4; +- unsigned int txen : 1; +- unsigned int dummy1 : 23; ++ unsigned int mdio : 1; ++ unsigned int mdoe : 1; ++ unsigned int mdc : 1; ++ unsigned int dummy1 : 29; + } reg_eth_rw_mgm_ctrl; + #define REG_RD_ADDR_eth_rw_mgm_ctrl 40 + #define REG_WR_ADDR_eth_rw_mgm_ctrl 40 +@@ -196,17 +196,8 @@ + unsigned int mdio : 1; + unsigned int exc_col : 1; + unsigned int urun : 1; +- unsigned int phyclk : 1; +- unsigned int txdata : 4; +- unsigned int txen : 1; +- unsigned int col : 1; +- unsigned int crs : 1; +- unsigned int txclk : 1; +- unsigned int rxdata : 4; +- unsigned int rxer : 1; +- unsigned int rxdv : 1; +- unsigned int rxclk : 1; +- unsigned int dummy1 : 13; ++ unsigned int clk_125 : 1; ++ unsigned int dummy1 : 28; + } reg_eth_r_stat; + #define REG_RD_ADDR_eth_r_stat 44 + +@@ -274,83 +265,83 @@ + + /* Register rw_intr_mask, scope eth, type rw */ + typedef struct { +- unsigned int crc : 1; +- unsigned int align : 1; +- unsigned int oversize : 1; +- unsigned int congestion : 1; +- unsigned int single_col : 1; +- unsigned int mult_col : 1; +- unsigned int late_col : 1; +- unsigned int deferred : 1; +- unsigned int carrier_loss : 1; +- unsigned int sqe_test_err : 1; +- unsigned int orun : 1; +- unsigned int urun : 1; +- unsigned int excessive_col : 1; +- unsigned int mdio : 1; +- unsigned int dummy1 : 18; ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; + } reg_eth_rw_intr_mask; + #define REG_RD_ADDR_eth_rw_intr_mask 76 + #define REG_WR_ADDR_eth_rw_intr_mask 76 + + /* Register rw_ack_intr, scope eth, type rw */ + typedef struct { +- unsigned int crc : 1; +- unsigned int align : 1; +- unsigned int oversize : 1; +- unsigned int congestion : 1; +- unsigned int single_col : 1; +- unsigned int mult_col : 1; +- unsigned int late_col : 1; +- unsigned int deferred : 1; +- unsigned int carrier_loss : 1; +- unsigned int sqe_test_err : 1; +- unsigned int orun : 1; +- unsigned int urun : 1; +- unsigned int excessive_col : 1; +- unsigned int mdio : 1; +- unsigned int dummy1 : 18; ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; + } reg_eth_rw_ack_intr; + #define REG_RD_ADDR_eth_rw_ack_intr 80 + #define REG_WR_ADDR_eth_rw_ack_intr 80 + + /* Register r_intr, scope eth, type r */ + typedef struct { +- unsigned int crc : 1; +- unsigned int align : 1; +- unsigned int oversize : 1; +- unsigned int congestion : 1; +- unsigned int single_col : 1; +- unsigned int mult_col : 1; +- unsigned int late_col : 1; +- unsigned int deferred : 1; +- unsigned int carrier_loss : 1; +- unsigned int sqe_test_err : 1; +- unsigned int orun : 1; +- unsigned int urun : 1; +- unsigned int excessive_col : 1; +- unsigned int mdio : 1; +- unsigned int dummy1 : 18; ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; + } reg_eth_r_intr; + #define REG_RD_ADDR_eth_r_intr 84 + + /* Register r_masked_intr, scope eth, type r */ + typedef struct { +- unsigned int crc : 1; +- unsigned int align : 1; +- unsigned int oversize : 1; +- unsigned int congestion : 1; +- unsigned int single_col : 1; +- unsigned int mult_col : 1; +- unsigned int late_col : 1; +- unsigned int deferred : 1; +- unsigned int carrier_loss : 1; +- unsigned int sqe_test_err : 1; +- unsigned int orun : 1; +- unsigned int urun : 1; +- unsigned int excessive_col : 1; +- unsigned int mdio : 1; +- unsigned int dummy1 : 18; ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; + } reg_eth_r_masked_intr; + #define REG_RD_ADDR_eth_r_masked_intr 88 + +@@ -360,12 +351,15 @@ + regk_eth_discard = 0x00000000, + regk_eth_ether = 0x00000000, + regk_eth_full = 0x00000001, ++ regk_eth_gmii = 0x00000003, ++ regk_eth_gtxclk = 0x00000001, + regk_eth_half = 0x00000000, + regk_eth_hsh = 0x00000001, + regk_eth_mii = 0x00000001, ++ regk_eth_mii_arec = 0x00000002, + regk_eth_mii_clk = 0x00000000, +- regk_eth_mii_rec = 0x00000002, + regk_eth_no = 0x00000000, ++ regk_eth_phyrst = 0x00000000, + regk_eth_rec = 0x00000001, + regk_eth_rw_ga_hi_default = 0x00000000, + regk_eth_rw_ga_lo_default = 0x00000000, +@@ -377,8 +371,8 @@ + regk_eth_rw_ma1_lo_default = 0x00000000, + regk_eth_rw_mgm_ctrl_default = 0x00000000, + regk_eth_rw_test_ctrl_default = 0x00000000, +- regk_eth_size1518 = 0x00000000, +- regk_eth_size1522 = 0x00000001, ++ regk_eth_size1518 = 0x000005ee, ++ regk_eth_size1522 = 0x000005f2, + regk_eth_yes = 0x00000001 + }; + #endif /* __eth_defs_h */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/eth_defs_fs.h 2007-02-07 10:36:10.000000000 +0100 +@@ -0,0 +1,384 @@ ++#ifndef __eth_defs_h ++#define __eth_defs_h ++ ++/* ++ * This file is autogenerated from ++ * file: eth_regs.r ++ * id: eth_regs.r,v 1.17 2006/02/08 16:47:19 perz Exp perz ++ * last modfied: Tue Feb 6 13:57:16 2007 ++ * ++ * by /n/asic/design/io/eth/inst/rdesc/rdes2c eth_regs.r ++ * id: $Id: eth_defs_fs.h,v 1.1 2007/02/07 09:36:10 karljope Exp $ ++ * Any changes here will be lost. ++ * ++ * -*- buffer-read-only: t -*- ++ */ ++/* Main access macros */ ++#ifndef REG_RD ++#define REG_RD( scope, inst, reg ) \ ++ REG_READ( reg_##scope##_##reg, \ ++ (inst) + REG_RD_ADDR_##scope##_##reg ) ++#endif ++ ++#ifndef REG_WR ++#define REG_WR( scope, inst, reg, val ) \ ++ REG_WRITE( reg_##scope##_##reg, \ ++ (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) ++#endif ++ ++#ifndef REG_RD_VECT ++#define REG_RD_VECT( scope, inst, reg, index ) \ ++ REG_READ( reg_##scope##_##reg, \ ++ (inst) + REG_RD_ADDR_##scope##_##reg + \ ++ (index) * STRIDE_##scope##_##reg ) ++#endif ++ ++#ifndef REG_WR_VECT ++#define REG_WR_VECT( scope, inst, reg, index, val ) \ ++ REG_WRITE( reg_##scope##_##reg, \ ++ (inst) + REG_WR_ADDR_##scope##_##reg + \ ++ (index) * STRIDE_##scope##_##reg, (val) ) ++#endif ++ ++#ifndef REG_RD_INT ++#define REG_RD_INT( scope, inst, reg ) \ ++ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg ) ++#endif ++ ++#ifndef REG_WR_INT ++#define REG_WR_INT( scope, inst, reg, val ) \ ++ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg, (val) ) ++#endif ++ ++#ifndef REG_RD_INT_VECT ++#define REG_RD_INT_VECT( scope, inst, reg, index ) \ ++ REG_READ( int, (inst) + REG_RD_ADDR_##scope##_##reg + \ ++ (index) * STRIDE_##scope##_##reg ) ++#endif ++ ++#ifndef REG_WR_INT_VECT ++#define REG_WR_INT_VECT( scope, inst, reg, index, val ) \ ++ REG_WRITE( int, (inst) + REG_WR_ADDR_##scope##_##reg + \ ++ (index) * STRIDE_##scope##_##reg, (val) ) ++#endif ++ ++#ifndef REG_TYPE_CONV ++#define REG_TYPE_CONV( type, orgtype, val ) \ ++ ( { union { orgtype o; type n; } r; r.o = val; r.n; } ) ++#endif ++ ++#ifndef reg_page_size ++#define reg_page_size 8192 ++#endif ++ ++#ifndef REG_ADDR ++#define REG_ADDR( scope, inst, reg ) \ ++ ( (inst) + REG_RD_ADDR_##scope##_##reg ) ++#endif ++ ++#ifndef REG_ADDR_VECT ++#define REG_ADDR_VECT( scope, inst, reg, index ) \ ++ ( (inst) + REG_RD_ADDR_##scope##_##reg + \ ++ (index) * STRIDE_##scope##_##reg ) ++#endif ++ ++/* C-code for register scope eth */ ++ ++/* Register rw_ma0_lo, scope eth, type rw */ ++typedef struct { ++ unsigned int addr : 32; ++} reg_eth_rw_ma0_lo; ++#define REG_RD_ADDR_eth_rw_ma0_lo 0 ++#define REG_WR_ADDR_eth_rw_ma0_lo 0 ++ ++/* Register rw_ma0_hi, scope eth, type rw */ ++typedef struct { ++ unsigned int addr : 16; ++ unsigned int dummy1 : 16; ++} reg_eth_rw_ma0_hi; ++#define REG_RD_ADDR_eth_rw_ma0_hi 4 ++#define REG_WR_ADDR_eth_rw_ma0_hi 4 ++ ++/* Register rw_ma1_lo, scope eth, type rw */ ++typedef struct { ++ unsigned int addr : 32; ++} reg_eth_rw_ma1_lo; ++#define REG_RD_ADDR_eth_rw_ma1_lo 8 ++#define REG_WR_ADDR_eth_rw_ma1_lo 8 ++ ++/* Register rw_ma1_hi, scope eth, type rw */ ++typedef struct { ++ unsigned int addr : 16; ++ unsigned int dummy1 : 16; ++} reg_eth_rw_ma1_hi; ++#define REG_RD_ADDR_eth_rw_ma1_hi 12 ++#define REG_WR_ADDR_eth_rw_ma1_hi 12 ++ ++/* Register rw_ga_lo, scope eth, type rw */ ++typedef struct { ++ unsigned int table : 32; ++} reg_eth_rw_ga_lo; ++#define REG_RD_ADDR_eth_rw_ga_lo 16 ++#define REG_WR_ADDR_eth_rw_ga_lo 16 ++ ++/* Register rw_ga_hi, scope eth, type rw */ ++typedef struct { ++ unsigned int table : 32; ++} reg_eth_rw_ga_hi; ++#define REG_RD_ADDR_eth_rw_ga_hi 20 ++#define REG_WR_ADDR_eth_rw_ga_hi 20 ++ ++/* Register rw_gen_ctrl, scope eth, type rw */ ++typedef struct { ++ unsigned int en : 1; ++ unsigned int phy : 2; ++ unsigned int protocol : 1; ++ unsigned int loopback : 1; ++ unsigned int flow_ctrl : 1; ++ unsigned int dummy1 : 26; ++} reg_eth_rw_gen_ctrl; ++#define REG_RD_ADDR_eth_rw_gen_ctrl 24 ++#define REG_WR_ADDR_eth_rw_gen_ctrl 24 ++ ++/* Register rw_rec_ctrl, scope eth, type rw */ ++typedef struct { ++ unsigned int ma0 : 1; ++ unsigned int ma1 : 1; ++ unsigned int individual : 1; ++ unsigned int broadcast : 1; ++ unsigned int undersize : 1; ++ unsigned int oversize : 1; ++ unsigned int bad_crc : 1; ++ unsigned int duplex : 1; ++ unsigned int max_size : 1; ++ unsigned int dummy1 : 23; ++} reg_eth_rw_rec_ctrl; ++#define REG_RD_ADDR_eth_rw_rec_ctrl 28 ++#define REG_WR_ADDR_eth_rw_rec_ctrl 28 ++ ++/* Register rw_tr_ctrl, scope eth, type rw */ ++typedef struct { ++ unsigned int crc : 1; ++ unsigned int pad : 1; ++ unsigned int retry : 1; ++ unsigned int ignore_col : 1; ++ unsigned int cancel : 1; ++ unsigned int hsh_delay : 1; ++ unsigned int ignore_crs : 1; ++ unsigned int dummy1 : 25; ++} reg_eth_rw_tr_ctrl; ++#define REG_RD_ADDR_eth_rw_tr_ctrl 32 ++#define REG_WR_ADDR_eth_rw_tr_ctrl 32 ++ ++/* Register rw_clr_err, scope eth, type rw */ ++typedef struct { ++ unsigned int clr : 1; ++ unsigned int dummy1 : 31; ++} reg_eth_rw_clr_err; ++#define REG_RD_ADDR_eth_rw_clr_err 36 ++#define REG_WR_ADDR_eth_rw_clr_err 36 ++ ++/* Register rw_mgm_ctrl, scope eth, type rw */ ++typedef struct { ++ unsigned int mdio : 1; ++ unsigned int mdoe : 1; ++ unsigned int mdc : 1; ++ unsigned int phyclk : 1; ++ unsigned int txdata : 4; ++ unsigned int txen : 1; ++ unsigned int dummy1 : 23; ++} reg_eth_rw_mgm_ctrl; ++#define REG_RD_ADDR_eth_rw_mgm_ctrl 40 ++#define REG_WR_ADDR_eth_rw_mgm_ctrl 40 ++ ++/* Register r_stat, scope eth, type r */ ++typedef struct { ++ unsigned int mdio : 1; ++ unsigned int exc_col : 1; ++ unsigned int urun : 1; ++ unsigned int phyclk : 1; ++ unsigned int txdata : 4; ++ unsigned int txen : 1; ++ unsigned int col : 1; ++ unsigned int crs : 1; ++ unsigned int txclk : 1; ++ unsigned int rxdata : 4; ++ unsigned int rxer : 1; ++ unsigned int rxdv : 1; ++ unsigned int rxclk : 1; ++ unsigned int dummy1 : 13; ++} reg_eth_r_stat; ++#define REG_RD_ADDR_eth_r_stat 44 ++ ++/* Register rs_rec_cnt, scope eth, type rs */ ++typedef struct { ++ unsigned int crc_err : 8; ++ unsigned int align_err : 8; ++ unsigned int oversize : 8; ++ unsigned int congestion : 8; ++} reg_eth_rs_rec_cnt; ++#define REG_RD_ADDR_eth_rs_rec_cnt 48 ++ ++/* Register r_rec_cnt, scope eth, type r */ ++typedef struct { ++ unsigned int crc_err : 8; ++ unsigned int align_err : 8; ++ unsigned int oversize : 8; ++ unsigned int congestion : 8; ++} reg_eth_r_rec_cnt; ++#define REG_RD_ADDR_eth_r_rec_cnt 52 ++ ++/* Register rs_tr_cnt, scope eth, type rs */ ++typedef struct { ++ unsigned int single_col : 8; ++ unsigned int mult_col : 8; ++ unsigned int late_col : 8; ++ unsigned int deferred : 8; ++} reg_eth_rs_tr_cnt; ++#define REG_RD_ADDR_eth_rs_tr_cnt 56 ++ ++/* Register r_tr_cnt, scope eth, type r */ ++typedef struct { ++ unsigned int single_col : 8; ++ unsigned int mult_col : 8; ++ unsigned int late_col : 8; ++ unsigned int deferred : 8; ++} reg_eth_r_tr_cnt; ++#define REG_RD_ADDR_eth_r_tr_cnt 60 ++ ++/* Register rs_phy_cnt, scope eth, type rs */ ++typedef struct { ++ unsigned int carrier_loss : 8; ++ unsigned int sqe_err : 8; ++ unsigned int dummy1 : 16; ++} reg_eth_rs_phy_cnt; ++#define REG_RD_ADDR_eth_rs_phy_cnt 64 ++ ++/* Register r_phy_cnt, scope eth, type r */ ++typedef struct { ++ unsigned int carrier_loss : 8; ++ unsigned int sqe_err : 8; ++ unsigned int dummy1 : 16; ++} reg_eth_r_phy_cnt; ++#define REG_RD_ADDR_eth_r_phy_cnt 68 ++ ++/* Register rw_test_ctrl, scope eth, type rw */ ++typedef struct { ++ unsigned int snmp_inc : 1; ++ unsigned int snmp : 1; ++ unsigned int backoff : 1; ++ unsigned int dummy1 : 29; ++} reg_eth_rw_test_ctrl; ++#define REG_RD_ADDR_eth_rw_test_ctrl 72 ++#define REG_WR_ADDR_eth_rw_test_ctrl 72 ++ ++/* Register rw_intr_mask, scope eth, type rw */ ++typedef struct { ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; ++} reg_eth_rw_intr_mask; ++#define REG_RD_ADDR_eth_rw_intr_mask 76 ++#define REG_WR_ADDR_eth_rw_intr_mask 76 ++ ++/* Register rw_ack_intr, scope eth, type rw */ ++typedef struct { ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; ++} reg_eth_rw_ack_intr; ++#define REG_RD_ADDR_eth_rw_ack_intr 80 ++#define REG_WR_ADDR_eth_rw_ack_intr 80 ++ ++/* Register r_intr, scope eth, type r */ ++typedef struct { ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; ++} reg_eth_r_intr; ++#define REG_RD_ADDR_eth_r_intr 84 ++ ++/* Register r_masked_intr, scope eth, type r */ ++typedef struct { ++ unsigned int crc : 1; ++ unsigned int align : 1; ++ unsigned int oversize : 1; ++ unsigned int congestion : 1; ++ unsigned int single_col : 1; ++ unsigned int mult_col : 1; ++ unsigned int late_col : 1; ++ unsigned int deferred : 1; ++ unsigned int carrier_loss : 1; ++ unsigned int sqe_test_err : 1; ++ unsigned int orun : 1; ++ unsigned int urun : 1; ++ unsigned int exc_col : 1; ++ unsigned int mdio : 1; ++ unsigned int dummy1 : 18; ++} reg_eth_r_masked_intr; ++#define REG_RD_ADDR_eth_r_masked_intr 88 ++ ++ ++/* Constants */ ++enum { ++ regk_eth_discard = 0x00000000, ++ regk_eth_ether = 0x00000000, ++ regk_eth_full = 0x00000001, ++ regk_eth_half = 0x00000000, ++ regk_eth_hsh = 0x00000001, ++ regk_eth_mii = 0x00000001, ++ regk_eth_mii_arec = 0x00000002, ++ regk_eth_mii_clk = 0x00000000, ++ regk_eth_no = 0x00000000, ++ regk_eth_rec = 0x00000001, ++ regk_eth_rw_ga_hi_default = 0x00000000, ++ regk_eth_rw_ga_lo_default = 0x00000000, ++ regk_eth_rw_gen_ctrl_default = 0x00000000, ++ regk_eth_rw_intr_mask_default = 0x00000000, ++ regk_eth_rw_ma0_hi_default = 0x00000000, ++ regk_eth_rw_ma0_lo_default = 0x00000000, ++ regk_eth_rw_ma1_hi_default = 0x00000000, ++ regk_eth_rw_ma1_lo_default = 0x00000000, ++ regk_eth_rw_mgm_ctrl_default = 0x00000000, ++ regk_eth_rw_test_ctrl_default = 0x00000000, ++ regk_eth_size1518 = 0x00000000, ++ regk_eth_size1522 = 0x00000001, ++ regk_eth_yes = 0x00000001 ++}; ++#endif /* __eth_defs_h */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/extmem_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/extmem_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/extmem_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/extmem_defs.h 2004-06-04 09:15:33.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/ext_mem/mod/extmem_regs.r +- * id: extmem_regs.r,v 1.1 2004/02/16 13:29:30 np Exp ++ * id: extmem_regs.r,v 1.1 2004/02/16 13:29:30 np Exp + * last modfied: Tue Mar 30 22:26:21 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile extmem_defs.h ../../inst/ext_mem/mod/extmem_regs.r + * id: $Id: extmem_defs.h,v 1.5 2004/06/04 07:15:33 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/gio_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/gio_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/gio_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/gio_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/gio/rtl/gio_regs.r +- * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp ++ * id: gio_regs.r,v 1.5 2005/02/04 09:43:21 perz Exp + * last modfied: Mon Apr 11 16:07:47 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile gio_defs.h ../../inst/gio/rtl/gio_regs.r + * id: $Id: gio_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect.h 2005-05-23 14:59:21.000000000 +0200 +@@ -3,7 +3,7 @@ + version . */ + + #ifndef _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R +-#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R ++#define _______INST_INTR_VECT_RTL_GUINNESS_IVMASK_CONFIG_R + #define MEMARB_INTR_VECT 0x31 + #define GEN_IO_INTR_VECT 0x32 + #define IOP0_INTR_VECT 0x33 +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/intr_vect_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/intr_vect/rtl/guinness/ivmask.config.r +- * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp ++ * id: ivmask.config.r,v 1.4 2005/02/15 16:05:38 stefans Exp + * last modfied: Mon Apr 11 16:08:03 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile intr_vect_defs.h ../../inst/intr_vect/rtl/guinness/ivmask.config.r + * id: $Id: intr_vect_defs.h,v 1.8 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +@@ -209,7 +209,7 @@ + #define REG_RD_ADDR_intr_vect_r_guru 16 + + /* Register rw_ipi, scope intr_vect, type rw */ +-typedef struct ++typedef struct + { + unsigned int vector; + } reg_intr_vect_rw_ipi; +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/Makefile linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/Makefile +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/Makefile 2004-01-07 21:34:55.000000000 +0100 +@@ -125,14 +125,14 @@ + done + + .PHONY: axw +-## %.axw - Generate the specified .axw file (doesn't work for all files ++## %.axw - Generate the specified .axw file (doesn't work for all files + ## due to inconsistent naming of .r files. + %.axw: axw + @for RDES in $(IOPROCREGDESC); do \ + if echo "$$RDES" | grep $* ; then \ + $(RDES2TXT) $$RDES; \ + fi \ +- done ++ done + + .PHONY: clean + ## clean - Remove .h files and .axw files. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_crc_par_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_crc_par.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_crc_par_defs_asm.h ../../inst/io_proc/rtl/iop_crc_par.r + * id: $Id: iop_crc_par_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_in.r +- * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp ++ * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_in_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_in.r + * id: $Id: iop_dmc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_dmc_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_out.r +- * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp ++ * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_dmc_out_defs_asm.h ../../inst/io_proc/rtl/iop_dmc_out.r + * id: $Id: iop_dmc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_in.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:07 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in.r + * id: $Id: iop_fifo_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_in_extra_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:08 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_in_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: $Id: iop_fifo_in_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_out.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:09 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out.r + * id: $Id: iop_fifo_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_fifo_out_extra_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:10 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_fifo_out_extra_defs_asm.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: $Id: iop_fifo_out_extra_defs_asm.h,v 1.1 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_mpu_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_mpu.r +- * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp ++ * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_mpu_defs_asm.h ../../inst/io_proc/rtl/iop_mpu.r + * id: $Id: iop_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_reg_space_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -1,5 +1,5 @@ + /* Autogenerated Changes here will be lost! +- * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg ++ * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg + */ + #define iop_version 0 + #define iop_fifo_in0_extra 64 +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_sap_in.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_in_defs_asm.h ../../inst/io_proc/rtl/iop_sap_in.r + * id: $Id: iop_sap_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sap_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_sap_out.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sap_out_defs_asm.h ../../inst/io_proc/rtl/iop_sap_out.r + * id: $Id: iop_sap_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_in_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_in.r +- * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp ++ * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_in_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_in.r + * id: $Id: iop_scrc_in_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_scrc_out_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_out.r +- * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp ++ * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_scrc_out_defs_asm.h ../../inst/io_proc/rtl/iop_scrc_out.r + * id: $Id: iop_scrc_out_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_spu_defs_asm.h 2005-04-24 20:31:06.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_spu.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_spu_defs_asm.h ../../inst/io_proc/rtl/iop_spu.r + * id: $Id: iop_spu_defs_asm.h,v 1.5 2005/04/24 18:31:06 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cfg_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cfg_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: $Id: iop_sw_cfg_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_cpu_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_cpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: $Id: iop_sw_cpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_mpu_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_mpu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: $Id: iop_sw_mpu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_sw_spu_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_sw_spu_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: $Id: iop_sw_spu_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_timer_grp_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_timer_grp.r +- * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp ++ * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_timer_grp_defs_asm.h ../../inst/io_proc/rtl/iop_timer_grp.r + * id: $Id: iop_timer_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_trigger_grp_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_trigger_grp.r +- * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp ++ * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_trigger_grp_defs_asm.h ../../inst/io_proc/rtl/iop_trigger_grp.r + * id: $Id: iop_trigger_grp_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/asm/iop_version_defs_asm.h 2005-04-24 20:31:07.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_version.r +- * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp ++ * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp + * last modfied: Mon Apr 11 16:08:44 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -asm --outfile asm/iop_version_defs_asm.h ../../inst/io_proc/rtl/guinness/iop_version.r + * id: $Id: iop_version_defs_asm.h,v 1.5 2005/04/24 18:31:07 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_crc_par_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_crc_par.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_crc_par_defs.h ../../inst/io_proc/rtl/iop_crc_par.r + * id: $Id: iop_crc_par_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_in_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_in.r +- * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp ++ * id: iop_dmc_in.r,v 1.26 2005/02/16 09:14:17 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_in_defs.h ../../inst/io_proc/rtl/iop_dmc_in.r + * id: $Id: iop_dmc_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_dmc_out_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_dmc_out.r +- * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp ++ * id: iop_dmc_out.r,v 1.30 2005/02/16 09:14:11 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_dmc_out_defs.h ../../inst/io_proc/rtl/iop_dmc_out.r + * id: $Id: iop_dmc_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_in.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:07 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_defs.h ../../inst/io_proc/rtl/iop_fifo_in.r + * id: $Id: iop_fifo_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_in_extra_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:08 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_in_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_in_extra.r + * id: $Id: iop_fifo_in_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_out.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:09 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_defs.h ../../inst/io_proc/rtl/iop_fifo_out.r + * id: $Id: iop_fifo_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_fifo_out_extra_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:10 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_fifo_out_extra_defs.h ../../inst/io_proc/rtl/iop_fifo_out_extra.r + * id: $Id: iop_fifo_out_extra_defs.h,v 1.1 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_mpu.r +- * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp ++ * id: iop_mpu.r,v 1.30 2005/02/17 08:12:33 niklaspa Exp + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_mpu_defs.h ../../inst/io_proc/rtl/iop_mpu.r + * id: $Id: iop_mpu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_mpu_macros.h 2004-01-07 16:18:30.000000000 +0100 +@@ -96,189 +96,189 @@ + #define MPU_ADD_RRR(S,N,D) (0x4000008C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_RRS(S,N,D) (0x4000048C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_RSR(S,N,D) (0x4000018C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_RSS(S,N,D) (0x4000058C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_SRR(S,N,D) (0x4000028C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_SRS(S,N,D) (0x4000068C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_SSR(S,N,D) (0x4000038C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADD_SSS(S,N,D) (0x4000078C | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDQ_RIR(S,N,D) (0x10000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDQ_IRR(S,N,D) (0x10000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_IRR_INSTR(S,N,D) (0xC000008C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ADDX_RIR_INSTR(S,N,D) (0xC000008C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ADDX_ISR_INSTR(S,N,D) (0xC000028C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ADDX_SIR_INSTR(S,N,D) (0xC000028C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ADDX_IRS_INSTR(S,N,D) (0xC000048C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ADDX_RIS_INSTR(S,N,D) (0xC000048C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ADDX_ISS_INSTR(S,N,D) (0xC000068C | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ADDX_SIS_INSTR(S,N,D) (0xC000068C | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ADDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_AND_RRR(S,N,D) (0x4000008A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_RRS(S,N,D) (0x4000048A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_RSR(S,N,D) (0x4000018A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_RSS(S,N,D) (0x4000058A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_SRR(S,N,D) (0x4000028A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_SRS(S,N,D) (0x4000068A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_SSR(S,N,D) (0x4000038A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_AND_SSS(S,N,D) (0x4000078A | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDQ_RIR(S,N,D) (0x08000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDQ_IRR(S,N,D) (0x08000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_RIR_INSTR(S,N,D) (0xC000008A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ANDX_IRR_INSTR(S,N,D) (0xC000008A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ANDX_ISR_INSTR(S,N,D) (0xC000028A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ANDX_SIR_INSTR(S,N,D) (0xC000028A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ANDX_IRS_INSTR(S,N,D) (0xC000048A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ANDX_ISS_INSTR(S,N,D) (0xC000068A | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ANDX_RIS_INSTR(S,N,D) (0xC000048A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ANDX_SIS_INSTR(S,N,D) (0xC000068A | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ANDX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_BA_I(S) (0x60000000 | ((S & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_BAR_R(S) (0x62000000 | ((S & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_BAR_S(S) (0x63000000 | ((S & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_BBC_RII(S,N,D) (0x78000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 21)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_BBS_RII(S,N,D) (0x7C000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 21)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_BNZ_RI(S,D) (0x74400000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_BMI_RI(S,D) (0x7FE00000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_BPL_RI(S,D) (0x7BE00000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_BZ_RI(S,D) (0x74000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_DI() (0x40000001) + + #define MPU_EI() (0x40000003) +@@ -286,243 +286,243 @@ + #define MPU_HALT() (0x40000002) + + #define MPU_JIR_I(S) (0x60200000 | ((S & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_JIR_R(S) (0x62200000 | ((S & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_JIR_S(S) (0x63200000 | ((S & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_JNT() (0x61000000) + + #define MPU_JSR_I(S) (0x60400000 | ((S & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_JSR_R(S) (0x62400000 | ((S & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_JSR_S(S) (0x63400000 | ((S & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_LSL_RRR(S,N,D) (0x4000008E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_RRS(S,N,D) (0x4000048E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_RSR(S,N,D) (0x4000018E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_RSS(S,N,D) (0x4000058E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_SRR(S,N,D) (0x4000028E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_SRS(S,N,D) (0x4000068E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_SSR(S,N,D) (0x4000038E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSL_SSS(S,N,D) (0x4000078E | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSLQ_RIR(S,N,D) (0x18000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_RRR(S,N,D) (0x4000008F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_RRS(S,N,D) (0x4000048F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_RSR(S,N,D) (0x4000018F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_RSS(S,N,D) (0x4000058F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_SRR(S,N,D) (0x4000028F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_SRS(S,N,D) (0x4000068F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_SSR(S,N,D) (0x4000038F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSR_SSS(S,N,D) (0x4000078F | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LSRQ_RIR(S,N,D) (0x1C000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_LW_IR(S,D) (0x64400000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_IS(S,D) (0x64600000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_RR(S,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_RS(S,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_SR(S,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_SS(S,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_RIR(S,N,D) (0x66400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_RIS(S,N,D) (0x66600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_SIR(S,N,D) (0x67400000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_LW_SIS(S,N,D) (0x67600000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_MOVE_RR(S,D) (0x40000081 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVE_RS(S,D) (0x40000481 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVE_SR(S,D) (0x40000181 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVE_SS(S,D) (0x40000581 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVEQ_IR(S,D) (0x24000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVEQ_IS(S,D) (0x2C000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVEX_IR_INSTR(S,D) (0xC0000081 | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVEX_IR_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_MOVEX_IS_INSTR(S,D) (0xC0000481 | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_MOVEX_IS_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_NOP() (0x40000000) + + #define MPU_NOT_RR(S,D) (0x40100081 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_NOT_RS(S,D) (0x40100481 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_NOT_SR(S,D) (0x40100181 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_NOT_SS(S,D) (0x40100581 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_RRR(S,N,D) (0x4000008B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_RRS(S,N,D) (0x4000048B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_RSR(S,N,D) (0x4000018B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_RSS(S,N,D) (0x4000058B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_SRR(S,N,D) (0x4000028B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_SRS(S,N,D) (0x4000068B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_SSR(S,N,D) (0x4000038B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_OR_SSS(S,N,D) (0x4000078B | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORQ_RIR(S,N,D) (0x0C000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORQ_IRR(S,N,D) (0x0C000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_RIR_INSTR(S,N,D) (0xC000008B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ORX_IRR_INSTR(S,N,D) (0xC000008B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ORX_SIR_INSTR(S,N,D) (0xC000028B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ORX_ISR_INSTR(S,N,D) (0xC000028B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ORX_RIS_INSTR(S,N,D) (0xC000048B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ORX_IRS_INSTR(S,N,D) (0xC000048B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_ORX_SIS_INSTR(S,N,D) (0xC000068B | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_ORX_ISS_INSTR(S,N,D) (0xC000068B | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_ORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_RET() (0x63003000) +@@ -531,232 +531,232 @@ + + #define MPU_RR_IR(S,D) (0x50000000 | ((S & ((1 << 11) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_RR_SR(S,D) (0x50008000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_RW_RI(S,D) (0x56000000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 11) - 1)) << 0)) +- ++ + #define MPU_RW_RS(S,D) (0x57000000 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_RWQ_II(S,D) (0x58000000 | ((S & ((1 << 16) - 1)) << 11)\ + | ((D & ((1 << 11) - 1)) << 0)) +- ++ + #define MPU_RWQ_IS(S,D) (0x55000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_RWX_II_INSTR(S,D) (0xD4000000 | ((D & ((1 << 11) - 1)) << 0)) +- ++ + #define MPU_RWX_II_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_RWX_IS_INSTR(S,D) (0xD5000000 | ((D & ((1 << 5) - 1)) << 16)) +- ++ + #define MPU_RWX_IS_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_SUB_RRR(S,N,D) (0x4000008D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_RRS(S,N,D) (0x4000048D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_RSR(S,N,D) (0x4000018D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_RSS(S,N,D) (0x4000058D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_SRR(S,N,D) (0x4000028D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_SRS(S,N,D) (0x4000068D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_SSR(S,N,D) (0x4000038D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUB_SSS(S,N,D) (0x4000078D | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUBQ_RIR(S,N,D) (0x14000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUBX_RIR_INSTR(S,N,D) (0xC000008D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUBX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_SUBX_SIR_INSTR(S,N,D) (0xC000028D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUBX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_SUBX_RIS_INSTR(S,N,D) (0xC000048D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUBX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_SUBX_SIS_INSTR(S,N,D) (0xC000068D | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_SUBX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_SW_RI(S,D) (0x64000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_SW_SI(S,D) (0x64200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_SW_RR(S,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_SR(S,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_RS(S,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_SS(S,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_RIR(S,N,D) (0x66000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_SIR(S,N,D) (0x66200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_RIS(S,N,D) (0x67000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SW_SIS(S,N,D) (0x67200000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SWX_II_INSTR(S,D) (0xE4000000 | ((D & ((1 << 16) - 1)) << 0)) +- ++ + #define MPU_SWX_II_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_SWX_IR_INSTR(S,D) (0xE6000000 | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SWX_IR_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_SWX_IS_INSTR(S,D) (0xE7000000 | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SWX_IS_IMM(S,D) (S & 0xFFFFFFFF) + + #define MPU_SWX_IIR_INSTR(S,N,D) (0xE6000000 | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SWX_IIR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_SWX_IIS_INSTR(S,N,D) (0xE7000000 | ((N & ((1 << 8) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 11)) +- ++ + #define MPU_SWX_IIS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_XOR_RRR(S,N,D) (0x40000089 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_RRS(S,N,D) (0x40000489 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_RSR(S,N,D) (0x40000189 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_RSS(S,N,D) (0x40000589 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_SRR(S,N,D) (0x40000289 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_SRS(S,N,D) (0x40000689 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_SSR(S,N,D) (0x40000389 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_SSS(S,N,D) (0x40000789 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_RR(S,D) (0x40000088 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_RS(S,D) (0x40000488 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_SR(S,D) (0x40000188 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XOR_SS(S,D) (0x40000588 | ((S & ((1 << 5) - 1)) << 11)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORQ_RIR(S,N,D) (0x04000000 | ((S & ((1 << 5) - 1)) << 16)\ + | ((N & ((1 << 16) - 1)) << 0)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORQ_IRR(S,N,D) (0x04000000 | ((S & ((1 << 16) - 1)) << 0)\ + | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_RIR_INSTR(S,N,D) (0xC0000089 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_RIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_XORX_IRR_INSTR(S,N,D) (0xC0000089 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_IRR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_XORX_SIR_INSTR(S,N,D) (0xC0000289 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_SIR_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_XORX_ISR_INSTR(S,N,D) (0xC0000289 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_ISR_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_XORX_RIS_INSTR(S,N,D) (0xC0000489 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_RIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_XORX_IRS_INSTR(S,N,D) (0xC0000489 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_IRS_IMM(S,N,D) (S & 0xFFFFFFFF) + + #define MPU_XORX_SIS_INSTR(S,N,D) (0xC0000689 | ((S & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_SIS_IMM(S,N,D) (N & 0xFFFFFFFF) + + #define MPU_XORX_ISS_INSTR(S,N,D) (0xC0000689 | ((N & ((1 << 5) - 1)) << 16)\ + | ((D & ((1 << 5) - 1)) << 21)) +- ++ + #define MPU_XORX_ISS_IMM(S,N,D) (S & 0xFFFFFFFF) + + +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_reg_space.h 2005-04-24 20:31:05.000000000 +0200 +@@ -1,5 +1,5 @@ + /* Autogenerated Changes here will be lost! +- * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg ++ * generated by ../gen_sw.pl Mon Apr 11 16:10:18 2005 iop_sw.cfg + */ + #define regi_iop_version (regi_iop + 0) + #define regi_iop_fifo_in0_extra (regi_iop + 64) +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_in_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_sap_in.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:45 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_in_defs.h ../../inst/io_proc/rtl/iop_sap_in.r + * id: $Id: iop_sap_in_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sap_out_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_sap_out.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sap_out_defs.h ../../inst/io_proc/rtl/iop_sap_out.r + * id: $Id: iop_sap_out_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_in_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_in.r +- * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp ++ * id: iop_scrc_in.r,v 1.10 2005/02/16 09:13:58 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_in_defs.h ../../inst/io_proc/rtl/iop_scrc_in.r + * id: $Id: iop_scrc_in_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_scrc_out_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_scrc_out.r +- * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp ++ * id: iop_scrc_out.r,v 1.11 2005/02/16 09:13:38 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_scrc_out_defs.h ../../inst/io_proc/rtl/iop_scrc_out.r + * id: $Id: iop_scrc_out_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_spu_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/iop_spu.r + * id: <not found> + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_spu_defs.h ../../inst/io_proc/rtl/iop_spu.r + * id: $Id: iop_spu_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cfg_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cfg_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cfg.r + * id: $Id: iop_sw_cfg_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_cpu_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_cpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_cpu.r + * id: $Id: iop_sw_cpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_mpu_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_mpu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_mpu.r + * id: $Id: iop_sw_mpu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_sw_spu_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: <not found> + * last modfied: Mon Apr 11 16:10:19 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_sw_spu_defs.h ../../inst/io_proc/rtl/guinness/iop_sw_spu.r + * id: $Id: iop_sw_spu_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_timer_grp_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_timer_grp.r +- * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp ++ * id: iop_timer_grp.r,v 1.29 2005/02/16 09:13:27 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_timer_grp_defs.h ../../inst/io_proc/rtl/iop_timer_grp.r + * id: $Id: iop_timer_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_trigger_grp_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/iop_trigger_grp.r +- * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp ++ * id: iop_trigger_grp.r,v 0.20 2005/02/16 09:13:20 niklaspa Exp + * last modfied: Mon Apr 11 16:08:46 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_trigger_grp_defs.h ../../inst/io_proc/rtl/iop_trigger_grp.r + * id: $Id: iop_trigger_grp_defs.h,v 1.5 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/iop/iop_version_defs.h 2005-04-24 20:31:05.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/io_proc/rtl/guinness/iop_version.r +- * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp ++ * id: iop_version.r,v 1.3 2004/04/22 12:37:54 jonaso Exp + * last modfied: Mon Apr 11 16:08:44 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile iop_version_defs.h ../../inst/io_proc/rtl/guinness/iop_version.r + * id: $Id: iop_version_defs.h,v 1.4 2005/04/24 18:31:05 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/irq_nmi_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../mod/irq_nmi.r + * id: <not found> + * last modfied: Thu Jan 22 09:22:43 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile irq_nmi_defs.h ../../mod/irq_nmi.r + * id: $Id: irq_nmi_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_bp_defs.h 2004-06-04 09:15:33.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Fri Nov 7 15:36:04 2003 +- * ++ * + * by /n/asic/projects/guinness/design/top/inst/rdesc/rdes2c ../../rtl/global.rmap ../../mod/modreg.rmap -base 0xb0000000 ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_bp_defs.h,v 1.2 2004/06/04 07:15:33 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/marb_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/marb_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -6,7 +6,7 @@ + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Mon Apr 11 16:12:16 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +@@ -265,7 +265,7 @@ + * file: ../../inst/memarb/rtl/guinness/marb_top.r + * id: <not found> + * last modfied: Mon Apr 11 16:12:16 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile marb_defs.h ../../inst/memarb/rtl/guinness/marb_top.r + * id: $Id: marb_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/pinmux_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/pinmux_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/pinmux_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/pinmux_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/pinmux/rtl/guinness/pinmux_regs.r +- * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp ++ * id: pinmux_regs.r,v 1.40 2005/02/09 16:22:59 perz Exp + * last modfied: Mon Apr 11 16:09:11 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile pinmux_defs.h ../../inst/pinmux/rtl/guinness/pinmux_regs.r + * id: $Id: pinmux_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/reg_map.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/reg_map.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/reg_map.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/reg_map.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,17 +4,17 @@ + /* + * This file is autogenerated from + * file: ../../mod/fakereg.rmap +- * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp ++ * id: fakereg.rmap,v 1.3 2004/02/11 19:53:22 ronny Exp + * last modified: Wed Feb 11 20:53:25 2004 + * file: ../../rtl/global.rmap +- * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp ++ * id: global.rmap,v 1.3 2003/08/18 15:08:23 mikaeln Exp + * last modified: Mon Aug 18 17:08:23 2003 + * file: ../../mod/modreg.rmap +- * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp ++ * id: modreg.rmap,v 1.31 2004/02/20 15:40:04 stefans Exp + * last modified: Fri Feb 20 16:40:04 2004 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c -map -base 0xb0000000 ../../rtl/global.rmap ../../mod/modreg.rmap ../../inst/io_proc/rtl/guinness/iop_top.r ../../inst/memarb/rtl/guinness/marb_top.r ../../mod/fakereg.rmap +- * id: $Id: reg_map.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ ++ * id: $Id: reg_map.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. + * + * -*- buffer-read-only: t -*- +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/rt_trace_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/rt_trace/rtl/rt_regs.r +- * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp ++ * id: rt_regs.r,v 1.18 2005/02/08 15:45:00 stefans Exp + * last modfied: Mon Apr 11 16:09:14 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile rt_trace_defs.h ../../inst/rt_trace/rtl/rt_regs.r + * id: $Id: rt_trace_defs.h,v 1.1 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ser_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ser_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/ser_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/ser_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/ser/rtl/ser_regs.r +- * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp ++ * id: ser_regs.r,v 1.23 2005/02/08 13:58:35 perz Exp + * last modfied: Mon Apr 11 16:09:21 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile ser_defs.h ../../inst/ser/rtl/ser_regs.r + * id: $Id: ser_defs.h,v 1.10 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/sser_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/sser_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/sser_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/sser_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/syncser/rtl/sser_regs.r +- * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp ++ * id: sser_regs.r,v 1.24 2005/02/11 14:27:36 gunnard Exp + * last modfied: Mon Apr 11 16:09:48 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile sser_defs.h ../../inst/syncser/rtl/sser_regs.r + * id: $Id: sser_defs.h,v 1.3 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop.h 2003-10-22 15:27:12.000000000 +0200 +@@ -54,4 +54,4 @@ + hash_iv = 1 + }; + +- ++ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strcop_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strcop_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/strcop/rtl/strcop_regs.r +- * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp ++ * id: strcop_regs.r,v 1.5 2003/10/15 12:09:45 kriskn Exp + * last modfied: Mon Apr 11 16:09:38 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strcop_defs.h ../../inst/strcop/rtl/strcop_regs.r + * id: $Id: strcop_defs.h,v 1.7 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strmux_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strmux_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/strmux_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/strmux_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/strmux/rtl/guinness/strmux_regs.r +- * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp ++ * id: strmux_regs.r,v 1.10 2005/02/10 10:10:46 perz Exp + * last modfied: Mon Apr 11 16:09:43 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile strmux_defs.h ../../inst/strmux/rtl/guinness/strmux_regs.r + * id: $Id: strmux_defs.h,v 1.5 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/supp_reg.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/supp_reg.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/supp_reg.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/supp_reg.h 2004-12-17 11:23:03.000000000 +0100 +@@ -37,7 +37,7 @@ + #define RW_MM_TLB_HI 6 + #define RW_MM_TLB_PGD 7 + +-#define BANK_GC 0 ++#define BANK_GC 0 + #define BANK_IM 1 + #define BANK_DM 2 + #define BANK_BP 3 +@@ -63,7 +63,7 @@ + SPEC_REG_WR(SPEC_REG_SRS,b); \ + NOP(); \ + NOP(); \ +- NOP(); ++ NOP(); + + #define SUPP_REG_WR(r,v) \ + __asm__ __volatile__ ("move %0, $S" STRINGIFYFY(r) "\n\t" \ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/timer_defs.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/timer_defs.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/hwregs/timer_defs.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/hwregs/timer_defs.h 2005-04-24 20:30:58.000000000 +0200 +@@ -4,9 +4,9 @@ + /* + * This file is autogenerated from + * file: ../../inst/timer/rtl/timer_regs.r +- * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp ++ * id: timer_regs.r,v 1.7 2003/03/11 11:16:59 perz Exp + * last modfied: Mon Apr 11 16:09:53 2005 +- * ++ * + * by /n/asic/design/tools/rdesc/src/rdes2c --outfile timer_defs.h ../../inst/timer/rtl/timer_regs.r + * id: $Id: timer_defs.h,v 1.6 2005/04/24 18:30:58 starvik Exp $ + * Any changes here will be lost. +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/ide.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/ide.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/ide.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/ide.h 2005-08-23 11:44:37.000000000 +0200 +@@ -33,7 +33,7 @@ + * together in a hwgroup, and will serialize accesses. this is good, because + * we can't access more than one interface at the same time on ETRAX100. + */ +- return ATA_INTR_VECT; ++ return ATA_INTR_VECT; + } + + static inline unsigned long ide_default_io_base(int index) +@@ -44,7 +44,7 @@ + * so we can use the io_base to remember that bitfield. + */ + ctrl2.sel = index; +- ++ + return REG_TYPE_CONV(unsigned long, reg_ata_rw_ctrl2, ctrl2); + } + +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/io.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/io.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/io.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/io.h 2006-12-06 14:17:02.000000000 +0100 +@@ -1,6 +1,7 @@ + #ifndef _ASM_ARCH_CRIS_IO_H + #define _ASM_ARCH_CRIS_IO_H + ++#include <linux/spinlock.h> + #include <asm/arch/hwregs/reg_map.h> + #include <asm/arch/hwregs/reg_rdwr.h> + #include <asm/arch/hwregs/gio_defs.h> +@@ -13,10 +14,11 @@ + + struct crisv32_ioport + { +- unsigned long* oe; +- unsigned long* data; +- unsigned long* data_in; ++ volatile unsigned long* oe; ++ volatile unsigned long* data; ++ volatile unsigned long* data_in; + unsigned int pin_count; ++ spinlock_t lock; + }; + + struct crisv32_iopin +@@ -34,22 +36,37 @@ + extern struct crisv32_iopin crisv32_led3_green; + extern struct crisv32_iopin crisv32_led3_red; + ++extern struct crisv32_iopin crisv32_led_net0_green; ++extern struct crisv32_iopin crisv32_led_net0_red; ++extern struct crisv32_iopin crisv32_led_net1_green; ++extern struct crisv32_iopin crisv32_led_net1_red; ++ + static inline void crisv32_io_set(struct crisv32_iopin* iopin, + int val) + { ++ long flags; ++ spin_lock_irqsave(&iopin->port->lock, flags); ++ + if (val) + *iopin->port->data |= iopin->bit; + else + *iopin->port->data &= ~iopin->bit; ++ ++ spin_unlock_irqrestore(&iopin->port->lock, flags); + } + + static inline void crisv32_io_set_dir(struct crisv32_iopin* iopin, + enum crisv32_io_dir dir) + { ++ long flags; ++ spin_lock_irqsave(&iopin->port->lock, flags); ++ + if (dir == crisv32_io_dir_in) + *iopin->port->oe &= ~iopin->bit; + else + *iopin->port->oe |= iopin->bit; ++ ++ spin_unlock_irqrestore(&iopin->port->lock, flags); + } + + static inline int crisv32_io_rd(struct crisv32_iopin* iopin) +@@ -60,28 +77,51 @@ + int crisv32_io_get(struct crisv32_iopin* iopin, + unsigned int port, unsigned int pin); + int crisv32_io_get_name(struct crisv32_iopin* iopin, +- char* name); ++ const char* name); + + #define LED_OFF 0x00 + #define LED_GREEN 0x01 + #define LED_RED 0x02 + #define LED_ORANGE (LED_GREEN | LED_RED) + +-#define LED_NETWORK_SET(x) \ +- do { \ +- LED_NETWORK_SET_G((x) & LED_GREEN); \ +- LED_NETWORK_SET_R((x) & LED_RED); \ ++#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) ++#define LED_NETWORK_GRP0_SET(x) \ ++ do { \ ++ LED_NETWORK_GRP0_SET_G((x) & LED_GREEN); \ ++ LED_NETWORK_GRP0_SET_R((x) & LED_RED); \ + } while (0) ++#else ++#define LED_NETWORK_GRP0_SET(x) while (0) {} ++#endif ++ ++#define LED_NETWORK_GRP0_SET_G(x) \ ++ crisv32_io_set(&crisv32_led_net0_green, !(x)); ++ ++#define LED_NETWORK_GRP0_SET_R(x) \ ++ crisv32_io_set(&crisv32_led_net0_red, !(x)); ++ ++#if defined(CONFIG_ETRAX_NBR_LED_GRP_TWO) ++#define LED_NETWORK_GRP1_SET(x) \ ++ do { \ ++ LED_NETWORK_GRP1_SET_G((x) & LED_GREEN); \ ++ LED_NETWORK_GRP1_SET_R((x) & LED_RED); \ ++ } while (0) ++#else ++#define LED_NETWORK_GRP1_SET(x) while (0) {} ++#endif ++ ++#define LED_NETWORK_GRP1_SET_G(x) \ ++ crisv32_io_set(&crisv32_led_net1_green, !(x)); ++ ++#define LED_NETWORK_GRP1_SET_R(x) \ ++ crisv32_io_set(&crisv32_led_net1_red, !(x)); ++ + #define LED_ACTIVE_SET(x) \ + do { \ + LED_ACTIVE_SET_G((x) & LED_GREEN); \ + LED_ACTIVE_SET_R((x) & LED_RED); \ + } while (0) + +-#define LED_NETWORK_SET_G(x) \ +- crisv32_io_set(&crisv32_led1_green, !(x)); +-#define LED_NETWORK_SET_R(x) \ +- crisv32_io_set(&crisv32_led1_red, !(x)); + #define LED_ACTIVE_SET_G(x) \ + crisv32_io_set(&crisv32_led2_green, !(x)); + #define LED_ACTIVE_SET_R(x) \ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/irq.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/irq.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/irq.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/irq.h 2006-10-13 14:45:18.000000000 +0200 +@@ -50,7 +50,7 @@ + #define IRQ_NAME2(nr) nr##_interrupt(void) + #define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr) + +-/* ++/* + * The reason for setting the S-bit when debugging the kernel is that we want + * hardware breakpoints to remain active while we are in an exception handler. + * Note that we cannot simply copy S1, since we may come here from user-space, +@@ -86,7 +86,7 @@ + "moveq 1, $r11\n\t" \ + "jump ret_from_intr\n\t" \ + "nop\n\t"); +-/* ++/* + * This is subtle. The timer interrupt is crucial and it should not be disabled + * for too long. However, if it had been a normal interrupt as per BUILD_IRQ, it + * would have been BLOCK'ed, and then softirq's are run before we return here to +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/juliette.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/juliette.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/juliette.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/juliette.h 2004-06-09 11:20:19.000000000 +0200 +@@ -166,7 +166,7 @@ + #define PA_NULL 0x3fff /* CCD/VIDEO */ + + typedef enum { +- jpeg = 0, ++ jpeg = 0, + dummy = 1 + } request_type; + +@@ -176,8 +176,8 @@ + halfsize = 2, + fieldsize = 3 + } size_type; +- +-typedef enum { ++ ++typedef enum { + min = 0, + low = 1, + medium = 2, +@@ -192,14 +192,14 @@ + q6 = 11 + } compr_type; + +-typedef enum { ++typedef enum { + deg_0 = 0, + deg_180 = 1, + deg_90 = 2, + deg_270 = 3 + } rotation_type; + +-typedef enum { ++typedef enum { + auto_white = 0, + hold = 1, + fixed_outdoor = 2, +@@ -207,12 +207,12 @@ + fixed_fluor = 4 + } white_balance_type; + +-typedef enum { ++typedef enum { + auto_exp = 0, + fixed_exp = 1 + } exposure_type; + +-typedef enum { ++typedef enum { + no_window = 0, + center = 1, + top = 2, +@@ -242,7 +242,7 @@ + right_align = 2 + } alignment_type; + +-typedef enum { ++typedef enum { + off = 0, + on = 1, + no = 0, +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/mmu.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/mmu.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/mmu.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/mmu.h 2004-11-23 19:36:19.000000000 +0100 +@@ -34,7 +34,7 @@ + * +-----+------+--------+-------+--------+-------+---------+ + */ + +-/* ++/* + * Defines for accessing the bits. Also define some synonyms for use with + * the software-based defined bits below. + */ +@@ -46,7 +46,7 @@ + #define _PAGE_SILENT_READ (1 << 3) /* Same as above. */ + #define _PAGE_GLOBAL (1 << 4) /* Global page. */ + +-/* ++/* + * The hardware doesn't care about these bits, but the kernel uses them in + * software. + */ +@@ -84,9 +84,9 @@ + + #define _KERNPG_TABLE (_PAGE_TABLE | _PAGE_KERNEL) + +-/* CRISv32 can do page protection for execute. ++/* CRISv32 can do page protection for execute. + * Write permissions imply read permissions. +- * Note that the numbers are in Execute-Write-Read order! ++ * Note that the numbers are in Execute-Write-Read order! + */ + #define __P000 PAGE_NONE + #define __P001 PAGE_READONLY +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/offset.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/offset.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/offset.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/offset.h 2005-08-29 09:36:28.000000000 +0200 +@@ -27,7 +27,7 @@ + #define THREAD_usp 4 /* offsetof(struct thread_struct, usp) */ + #define THREAD_ccs 8 /* offsetof(struct thread_struct, ccs) */ + +-#define TASK_pid 149 /* offsetof(struct task_struct, pid) */ ++#define TASK_pid 151 /* offsetof(struct task_struct, pid) */ + + #define LCLONE_VM 256 /* CLONE_VM */ + #define LCLONE_UNTRACED 8388608 /* CLONE_UNTRACED */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/page.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/page.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/page.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/page.h 2006-10-13 14:45:18.000000000 +0200 +@@ -11,7 +11,7 @@ + * selected bit it's possible to convert between KSEG_x and 0x40000000 where the + * DRAM really resides. DRAM is virtually at 0xc. + */ +-#ifndef CONFIG_ETRAXFS_SIM ++#ifndef CONFIG_ETRAXFS_SIM + #define __pa(x) ((unsigned long)(x) & 0x7fffffff) + #define __va(x) ((void *)((unsigned long)(x) | 0x80000000)) + #else +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/pinmux.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/pinmux.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/pinmux.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/pinmux.h 2005-07-02 14:30:13.000000000 +0200 +@@ -1,7 +1,7 @@ + #ifndef _ASM_CRIS_ARCH_PINMUX_H + #define _ASM_CRIS_ARCH_PINMUX_H + +-#define PORT_B 0 ++#define PORT_B 0 + #define PORT_C 1 + #define PORT_D 2 + #define PORT_E 3 +@@ -34,6 +34,7 @@ + int crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode); + int crisv32_pinmux_alloc_fixed(enum fixed_function function); + int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin); ++int crisv32_pinmux_dealloc_fixed(enum fixed_function function); + void crisv32_pinmux_dump(void); + + #endif +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/processor.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/processor.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/processor.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/processor.h 2006-10-13 14:45:18.000000000 +0200 +@@ -19,7 +19,7 @@ + unsigned long ccs; /* Saved flags register. */ + }; + +-/* ++/* + * User-space process size. This is hardcoded into a few places, so don't + * changed it unless everything's clear! + */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/ptrace.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/ptrace.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/ptrace.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/ptrace.h 2004-10-21 13:51:21.000000000 +0200 +@@ -49,7 +49,7 @@ + #define CCS_SHIFT 10 /* Shift count for each level in CCS */ + + /* pt_regs not only specifices the format in the user-struct during +- * ptrace but is also the frame format used in the kernel prologue/epilogues ++ * ptrace but is also the frame format used in the kernel prologue/epilogues + * themselves + */ + +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/spinlock.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/spinlock.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/spinlock.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/spinlock.h 2007-01-09 10:31:32.000000000 +0100 +@@ -19,7 +19,7 @@ + __asm__ volatile ("move.d %1,%0" \ + : "=m" (lock->lock) \ + : "r" (1) \ +- : "memory"); ++ : "memory"); + } + + static inline int _raw_spin_trylock(spinlock_t *lock) +@@ -80,7 +80,7 @@ + { + unsigned long flags; + local_irq_save(flags); +- _raw_spin_lock(&rw->lock); ++ _raw_spin_lock(&rw->lock); + + rw->counter++; + +@@ -92,7 +92,7 @@ + { + unsigned long flags; + local_irq_save(flags); +- _raw_spin_lock(&rw->lock); ++ _raw_spin_lock(&rw->lock); + + rw->counter--; + +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/system.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/system.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/system.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/system.h 2006-10-13 14:45:18.000000000 +0200 +@@ -39,7 +39,7 @@ + #define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long) (x),(ptr),sizeof(*(ptr)))) + +-#define tas(ptr) (xchg((ptr),1)) ++#define tas(ptr) (xchg((ptr),1)) + + struct __xchg_dummy { unsigned long a[100]; }; + #define __xg(x) ((struct __xchg_dummy *)(x)) +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/timex.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/timex.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/timex.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/timex.h 2005-08-23 11:44:37.000000000 +0200 +@@ -6,8 +6,8 @@ + #include <asm/arch/hwregs/timer_defs.h> + + /* +- * The clock runs at 100MHz, we divide it by 1000000. If you change anything +- * here you must check time.c as well. ++ * The clock runs at 100MHz, we divide it by 1000000. If you change anything ++ * here you must check time.c as well. + */ + + #define CLOCK_TICK_RATE 100000000 /* Underlying frequency of the HZ timer */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/tlb.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/tlb.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/tlb.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/tlb.h 2003-07-02 11:29:45.000000000 +0200 +@@ -2,8 +2,8 @@ + #define _CRIS_ARCH_TLB_H + + /* +- * The TLB is a 64-entry cache. Each entry has a 8-bit page_id that is used +- * to store the "process" it belongs to (=> fast mm context switch). The ++ * The TLB is a 64-entry cache. Each entry has a 8-bit page_id that is used ++ * to store the "process" it belongs to (=> fast mm context switch). The + * last page_id is never used so we can make TLB entries that never matches. + */ + #define NUM_TLB_ENTRIES 64 +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/uaccess.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/uaccess.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/uaccess.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/uaccess.h 2006-01-04 07:13:04.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* ++/* + * Authors: Hans-Peter Nilsson (hp@axis.com) + * + */ +diff -urN linux-2.6.19.2.old/include/asm-cris/arch-v32/unistd.h linux-2.6.19.2.dev/include/asm-cris/arch-v32/unistd.h +--- linux-2.6.19.2.old/include/asm-cris/arch-v32/unistd.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/arch-v32/unistd.h 2005-10-31 09:50:44.000000000 +0100 +@@ -16,7 +16,8 @@ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ +- : "r" (__n_)); \ ++ : "r" (__n_) \ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ +@@ -33,7 +34,8 @@ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ +- : "r" (__n_), "0" (__a)); \ ++ : "r" (__n_), "0" (__a) \ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ +@@ -51,7 +53,8 @@ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ +- : "r" (__n_), "0" (__a), "r" (__b)); \ ++ : "r" (__n_), "0" (__a), "r" (__b) \ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ +@@ -70,7 +73,8 @@ + ".endif\n\t" \ + "break 13" \ + : "=r" (__a) \ +- : "r" (__n_), "0" (__a), "r" (__b), "r" (__c)); \ ++ : "r" (__n_), "0" (__a), "r" (__b), "r" (__c) \ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ +@@ -91,12 +95,13 @@ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ +- "r" (__c), "r" (__d)); \ ++ "r" (__c), "r" (__d)\ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ + return (type) -1; \ +-} ++} + + #define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4, \ + type5,arg5) \ +@@ -114,7 +119,8 @@ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ +- "r" (__c), "r" (__d), "h" (__e)); \ ++ "r" (__c), "r" (__d), "h" (__e) \ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ +@@ -138,7 +144,8 @@ + "break 13" \ + : "=r" (__a) \ + : "r" (__n_), "0" (__a), "r" (__b), \ +- "r" (__c), "r" (__d), "h" (__e), "x" (__f)); \ ++ "r" (__c), "r" (__d), "h" (__e), "x" (__f) \ ++ : "memory"); \ + if (__a >= 0) \ + return (type) __a; \ + errno = -__a; \ +diff -urN linux-2.6.19.2.old/include/asm-cris/atomic.h linux-2.6.19.2.dev/include/asm-cris/atomic.h +--- linux-2.6.19.2.old/include/asm-cris/atomic.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/atomic.h 2006-07-03 15:11:43.000000000 +0200 +@@ -5,6 +5,7 @@ + + #include <asm/system.h> + #include <asm/arch/atomic.h> ++#include <linux/compiler.h> + + /* + * Atomic operations that C can't guarantee us. Useful for +@@ -89,7 +90,7 @@ + unsigned long flags; + int retval; + cris_atomic_save(v, flags); +- retval = (v->counter)++; ++ retval = ++(v->counter); + cris_atomic_restore(v, flags); + return retval; + } +@@ -99,7 +100,7 @@ + unsigned long flags; + int retval; + cris_atomic_save(v, flags); +- retval = (v->counter)--; ++ retval = --(v->counter); + cris_atomic_restore(v, flags); + return retval; + } +diff -urN linux-2.6.19.2.old/include/asm-cris/axisflashmap.h linux-2.6.19.2.dev/include/asm-cris/axisflashmap.h +--- linux-2.6.19.2.old/include/asm-cris/axisflashmap.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/axisflashmap.h 2006-09-07 14:24:25.000000000 +0200 +@@ -15,18 +15,18 @@ + /* The partitiontable_head is located at offset +10: */ + struct partitiontable_head { + __u16 magic; /* PARTITION_TABLE_MAGIC */ +- __u16 size; /* Length of ptable block (not header) */ +- __u32 checksum; /* simple longword sum */ ++ __u16 size; /* Length of ptable block (entries + end marker) */ ++ __u32 checksum; /* simple longword sum, over entries + end marker */ + }; + + /* And followed by partition table entries */ + struct partitiontable_entry { +- __u32 offset; /* Offset is relative to the sector the ptable is in */ +- __u32 size; ++ __u32 offset; /* relative to the sector the ptable is in */ ++ __u32 size; /* in bytes */ + __u32 checksum; /* simple longword sum */ +- __u16 type; +- __u16 flags; /* bit 0: ro/rw = 1/0 */ +- __u32 future0; /* 16 bytes reserved for future use */ ++ __u16 type; /* see type codes below */ ++ __u16 flags; /* bit 0: ro/rw = 1/0 */ ++ __u32 future0; /* 16 bytes reserved for future use */ + __u32 future1; + __u32 future2; + __u32 future3; +@@ -35,10 +35,25 @@ + #define PARTITIONTABLE_END_MARKER 0xFFFFFFFF + #define PARTITIONTABLE_END_MARKER_SIZE 4 + +-/*#define PARTITION_TYPE_RESCUE 0x0000?*/ /* Not used, maybe it should? */ ++#define PARTITIONTABLE_END_PAD 10 ++ ++/* Complete structure for whole partition table */ ++/* note that table may end before CONFIG_ETRAX_PTABLE_ENTRIES by setting ++ * offset of the last entry + 1 to PARTITIONTABLE_END_MARKER. ++ */ ++struct partitiontable { ++ __u8 skip[PARTITION_TABLE_OFFSET]; ++ struct partitiontable_head head; ++ struct partitiontable_entry entries[]; ++}; ++ + #define PARTITION_TYPE_PARAM 0x0001 + #define PARTITION_TYPE_KERNEL 0x0002 + #define PARTITION_TYPE_JFFS 0x0003 ++#define PARTITION_TYPE_JFFS2 0x0000 ++ ++#define PARTITION_FLAGS_READONLY_MASK 0x0001 ++#define PARTITION_FLAGS_READONLY 0x0001 + + /* The master mtd for the entire flash. */ + extern struct mtd_info* axisflash_mtd; +diff -urN linux-2.6.19.2.old/include/asm-cris/bitops.h linux-2.6.19.2.dev/include/asm-cris/bitops.h +--- linux-2.6.19.2.old/include/asm-cris/bitops.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/bitops.h 2007-01-09 10:31:32.000000000 +0100 +@@ -155,7 +155,7 @@ + #include <asm-generic/bitops/hweight.h> + #include <asm-generic/bitops/find.h> + +-#include <asm-generic/bitops/ext2-non-atomic.h> ++//#include <asm-generic/bitops/ext2-non-atomic.h> + + #define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a) + #define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a) +diff -urN linux-2.6.19.2.old/include/asm-cris/bug.h linux-2.6.19.2.dev/include/asm-cris/bug.h +--- linux-2.6.19.2.old/include/asm-cris/bug.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/bug.h 2006-06-21 10:29:15.000000000 +0200 +@@ -1,4 +1,4 @@ + #ifndef _CRIS_BUG_H + #define _CRIS_BUG_H +-#include <asm-generic/bug.h> ++#include <asm/arch/bug.h> + #endif +diff -urN linux-2.6.19.2.old/include/asm-cris/delay.h linux-2.6.19.2.dev/include/asm-cris/delay.h +--- linux-2.6.19.2.old/include/asm-cris/delay.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/delay.h 2006-10-11 19:46:19.000000000 +0200 +@@ -13,10 +13,13 @@ + + extern unsigned long loops_per_usec; /* arch/cris/mm/init.c */ + ++/* May be defined by arch/delay.h. */ ++#ifndef udelay + static inline void udelay(unsigned long usecs) + { + __delay(usecs * loops_per_usec); + } ++#endif + + #endif /* defined(_CRIS_DELAY_H) */ + +diff -urN linux-2.6.19.2.old/include/asm-cris/ethernet.h linux-2.6.19.2.dev/include/asm-cris/ethernet.h +--- linux-2.6.19.2.old/include/asm-cris/ethernet.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/ethernet.h 2006-07-06 07:58:52.000000000 +0200 +@@ -15,4 +15,7 @@ + #define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 /* Auto neg duplex */ + #define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 /* Full duplex */ + #define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 /* Half duplex */ ++#define SET_ETH_ENABLE_LEDS SIOCDEVPRIVATE+6 /* Enable net LEDs */ ++#define SET_ETH_DISABLE_LEDS SIOCDEVPRIVATE+7 /* Disable net LEDs */ ++#define SET_ETH_AUTONEG SIOCDEVPRIVATE+8 + #endif /* _CRIS_ETHERNET_H */ +diff -urN linux-2.6.19.2.old/include/asm-cris/etraxgpio.h linux-2.6.19.2.dev/include/asm-cris/etraxgpio.h +--- linux-2.6.19.2.old/include/asm-cris/etraxgpio.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/etraxgpio.h 2007-01-09 10:31:32.000000000 +0100 +@@ -16,15 +16,19 @@ + * For ETRAX FS (ARCH_V32): + * /dev/gpioa minor 0, 8 bit GPIO, each bit can change direction + * /dev/gpiob minor 1, 18 bit GPIO, each bit can change direction +- * /dev/gpioc minor 2, 18 bit GPIO, each bit can change direction +- * /dev/gpiod minor 3, 18 bit GPIO, each bit can change direction +- * /dev/gpioe minor 4, 18 bit GPIO, each bit can change direction +- * /dev/leds minor 5, Access to leds depending on kernelconfig ++ * /dev/gpioc minor 3, 18 bit GPIO, each bit can change direction ++ * /dev/gpiod minor 4, 18 bit GPIO, each bit can change direction ++ * /dev/gpioe minor 5, 18 bit GPIO, each bit can change direction ++ * /dev/leds minor 2, Access to leds depending on kernelconfig + * + */ + #ifndef _ASM_ETRAXGPIO_H + #define _ASM_ETRAXGPIO_H + ++#ifndef __KERNEL__ ++#include <linux/autoconf.h> ++#endif ++ + /* etraxgpio _IOC_TYPE, bits 8 to 15 in ioctl cmd */ + #ifdef CONFIG_ETRAX_ARCH_V10 + #define ETRAXGPIO_IOCTYPE 43 +@@ -42,8 +46,13 @@ + #define GPIO_MINOR_C 3 + #define GPIO_MINOR_D 4 + #define GPIO_MINOR_E 5 ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++#define GPIO_MINOR_V 6 ++#define GPIO_MINOR_LAST 6 ++#else + #define GPIO_MINOR_LAST 5 + #endif ++#endif + + /* supported ioctl _IOC_NR's */ + +diff -urN linux-2.6.19.2.old/include/asm-cris/fasttimer.h linux-2.6.19.2.dev/include/asm-cris/fasttimer.h +--- linux-2.6.19.2.old/include/asm-cris/fasttimer.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/fasttimer.h 2006-12-11 12:22:38.000000000 +0100 +@@ -1,9 +1,9 @@ +-/* $Id: fasttimer.h,v 1.3 2004/05/14 10:19:19 starvik Exp $ ++/* + * linux/include/asm-cris/fasttimer.h + * + * Fast timers for ETRAX100LX + * This may be useful in other OS than Linux so use 2 space indentation... +- * Copyright (C) 2000, 2002 Axis Communications AB ++ * Copyright (C) 2000-2006 Axis Communications AB + */ + #include <linux/time.h> /* struct timeval */ + #include <linux/timex.h> +@@ -12,11 +12,16 @@ + + typedef void fast_timer_function_type(unsigned long); + ++struct fasttime_t { ++ unsigned long tv_jiff; /* jiffies */ ++ unsigned long tv_usec; /* microseconds */ ++}; ++ + struct fast_timer{ /* Close to timer_list */ + struct fast_timer *next; + struct fast_timer *prev; +- struct timeval tv_set; +- struct timeval tv_expires; ++ struct fasttime_t tv_set; ++ struct fasttime_t tv_expires; + unsigned long delay_us; + fast_timer_function_type *function; + unsigned long data; +@@ -38,6 +43,6 @@ + void schedule_usleep(unsigned long us); + + +-void fast_timer_init(void); ++int fast_timer_init(void); + + #endif +diff -urN linux-2.6.19.2.old/include/asm-cris/hardirq.h linux-2.6.19.2.dev/include/asm-cris/hardirq.h +--- linux-2.6.19.2.old/include/asm-cris/hardirq.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/hardirq.h 2005-10-31 09:50:43.000000000 +0100 +@@ -1,6 +1,7 @@ + #ifndef __ASM_HARDIRQ_H + #define __ASM_HARDIRQ_H + ++#include <asm/irq.h> + #include <linux/threads.h> + #include <linux/cache.h> + +diff -urN linux-2.6.19.2.old/include/asm-cris/io.h linux-2.6.19.2.dev/include/asm-cris/io.h +--- linux-2.6.19.2.old/include/asm-cris/io.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/io.h 2006-01-04 07:13:03.000000000 +0100 +@@ -127,8 +127,8 @@ + + #define eth_io_copy_and_sum(a,b,c,d) eth_copy_and_sum((a),(void __force *)(b),(c),(d)) + +-/* The following is junk needed for the arch-independent code but which +- * we never use in the CRIS port ++/* I/O port access. Normally there is no I/O space on CRIS but when Cardbus/PCI ++ * is enable the request is passed through the bridge. + */ + + #define IO_SPACE_LIMIT 0xffff +diff -urN linux-2.6.19.2.old/include/asm-cris/irq_regs.h linux-2.6.19.2.dev/include/asm-cris/irq_regs.h +--- linux-2.6.19.2.old/include/asm-cris/irq_regs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/irq_regs.h 2007-01-09 10:31:32.000000000 +0100 +@@ -0,0 +1 @@ ++#include <asm-generic/irq_regs.h> +diff -urN linux-2.6.19.2.old/include/asm-cris/pgtable.h linux-2.6.19.2.dev/include/asm-cris/pgtable.h +--- linux-2.6.19.2.old/include/asm-cris/pgtable.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/pgtable.h 2007-01-12 15:41:37.000000000 +0100 +@@ -279,7 +279,7 @@ + #define pte_unmap(pte) do { } while (0) + #define pte_unmap_nested(pte) do { } while (0) + #define pte_pfn(x) ((unsigned long)(__va((x).pte)) >> PAGE_SHIFT) +-#define pfn_pte(pfn, prot) __pte((__pa((pfn) << PAGE_SHIFT)) | pgprot_val(prot)) ++#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + + #define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), pte_val(e)) +diff -urN linux-2.6.19.2.old/include/asm-cris/semaphore-helper.h linux-2.6.19.2.dev/include/asm-cris/semaphore-helper.h +--- linux-2.6.19.2.old/include/asm-cris/semaphore-helper.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/semaphore-helper.h 2005-08-23 11:44:35.000000000 +0200 +@@ -20,12 +20,12 @@ + /* + * These two _must_ execute atomically wrt each other. + */ +-extern inline void wake_one_more(struct semaphore * sem) ++static inline void wake_one_more(struct semaphore * sem) + { + atomic_inc(&sem->waking); + } + +-extern inline int waking_non_zero(struct semaphore *sem) ++static inline int waking_non_zero(struct semaphore *sem) + { + unsigned long flags; + int ret = 0; +@@ -40,7 +40,7 @@ + return ret; + } + +-extern inline int waking_non_zero_interruptible(struct semaphore *sem, ++static inline int waking_non_zero_interruptible(struct semaphore *sem, + struct task_struct *tsk) + { + int ret = 0; +@@ -59,7 +59,7 @@ + return ret; + } + +-extern inline int waking_non_zero_trylock(struct semaphore *sem) ++static inline int waking_non_zero_trylock(struct semaphore *sem) + { + int ret = 1; + unsigned long flags; +diff -urN linux-2.6.19.2.old/include/asm-cris/semaphore.h linux-2.6.19.2.dev/include/asm-cris/semaphore.h +--- linux-2.6.19.2.old/include/asm-cris/semaphore.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/semaphore.h 2006-01-04 07:13:03.000000000 +0100 +@@ -51,7 +51,6 @@ + { + sema_init(sem, 0); + } +- + extern void __down(struct semaphore * sem); + extern int __down_interruptible(struct semaphore * sem); + extern int __down_trylock(struct semaphore * sem); +diff -urN linux-2.6.19.2.old/include/asm-cris/smp.h linux-2.6.19.2.dev/include/asm-cris/smp.h +--- linux-2.6.19.2.old/include/asm-cris/smp.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/smp.h 2005-10-31 09:50:43.000000000 +0100 +@@ -4,7 +4,7 @@ + #include <linux/cpumask.h> + + extern cpumask_t phys_cpu_present_map; +-#define cpu_possible_map phys_cpu_present_map ++extern cpumask_t cpu_possible_map; + + #define __smp_processor_id() (current_thread_info()->cpu) + +diff -urN linux-2.6.19.2.old/include/asm-cris/sync_serial.h linux-2.6.19.2.dev/include/asm-cris/sync_serial.h +--- linux-2.6.19.2.old/include/asm-cris/sync_serial.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/sync_serial.h 2005-11-10 15:43:16.000000000 +0100 +@@ -1,9 +1,9 @@ +-/* ++/* + * ioctl defines for synchronous serial port driver + * + * Copyright (c) 2001-2003 Axis Communications AB +- * +- * Author: Mikael Starvik ++ * ++ * Author: Mikael Starvik + * + */ + +@@ -24,7 +24,7 @@ + #define SSP150 0 + #define SSP300 1 + #define SSP600 2 +-#define SSP1200 3 ++#define SSP1200 3 + #define SSP2400 4 + #define SSP4800 5 + #define SSP9600 6 +@@ -67,6 +67,7 @@ + /* Values for SSP_FRAME_SYNC */ + #define NORMAL_SYNC 1 + #define EARLY_SYNC 2 ++#define SECOND_WORD_SYNC 0x40000 + + #define BIT_SYNC 4 + #define WORD_SYNC 8 +@@ -86,6 +87,8 @@ + #define CLOCK_GATED 0x10000 + #define CLOCK_NOT_GATED 0x20000 + ++ ++ + /* Values for SSP_IPOLARITY and SSP_OPOLARITY */ + #define CLOCK_NORMAL 1 + #define CLOCK_INVERT 2 +diff -urN linux-2.6.19.2.old/include/asm-cris/thread_info.h linux-2.6.19.2.dev/include/asm-cris/thread_info.h +--- linux-2.6.19.2.old/include/asm-cris/thread_info.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/thread_info.h 2006-03-22 11:01:27.000000000 +0100 +@@ -32,6 +32,7 @@ + unsigned long flags; /* low level flags */ + __u32 cpu; /* current CPU */ + int preempt_count; /* 0 => preemptable, <0 => BUG */ ++ __u32 tls; /* TLS for this thread */ + + mm_segment_t addr_limit; /* thread address space: + 0-0xBFFFFFFF for user-thead +@@ -82,6 +83,7 @@ + #define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ + #define TIF_SIGPENDING 2 /* signal pending */ + #define TIF_NEED_RESCHED 3 /* rescheduling necessary */ ++#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */ + #define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */ + #define TIF_MEMDIE 17 + +@@ -89,6 +91,7 @@ + #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) + #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) + #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) ++#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) + #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) + + #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ +diff -urN linux-2.6.19.2.old/include/asm-cris/unistd.h linux-2.6.19.2.dev/include/asm-cris/unistd.h +--- linux-2.6.19.2.old/include/asm-cris/unistd.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/include/asm-cris/unistd.h 2007-01-09 10:31:32.000000000 +0100 +@@ -255,6 +255,7 @@ + #define __NR_io_submit 248 + #define __NR_io_cancel 249 + #define __NR_fadvise64 250 ++/* 251 is available for reuse (was briefly sys_set_zone_reclaim) */ + #define __NR_exit_group 252 + #define __NR_lookup_dcookie 253 + #define __NR_epoll_create 254 +@@ -292,10 +293,41 @@ + #define __NR_add_key 286 + #define __NR_request_key 287 + #define __NR_keyctl 288 ++#define __NR_ioprio_set 289 ++#define __NR_ioprio_get 290 ++#define __NR_inotify_init 291 ++#define __NR_inotify_add_watch 292 ++#define __NR_inotify_rm_watch 293 ++#define __NR_migrate_pages 294 ++#define __NR_openat 295 ++#define __NR_mkdirat 296 ++#define __NR_mknodat 297 ++#define __NR_fchownat 298 ++#define __NR_futimesat 299 ++#define __NR_fstatat64 300 ++#define __NR_unlinkat 301 ++#define __NR_renameat 302 ++#define __NR_linkat 303 ++#define __NR_symlinkat 304 ++#define __NR_readlinkat 305 ++#define __NR_fchmodat 306 ++#define __NR_faccessat 307 ++#define __NR_pselect6 308 ++#define __NR_ppoll 309 ++#define __NR_unshare 310 ++#define __NR_set_robust_list 311 ++#define __NR_get_robust_list 312 ++#define __NR_splice 313 ++#define __NR_sync_file_range 314 ++#define __NR_tee 315 ++#define __NR_vmsplice 316 ++#define __NR_move_pages 317 ++#define __NR_getcpu 318 ++#define __NR_epoll_pwait 319 + + #ifdef __KERNEL__ + +-#define NR_syscalls 289 ++#define NR_syscalls 320 + + #include <asm/arch/unistd.h> + +@@ -321,6 +353,7 @@ + #define __ARCH_WANT_SYS_SIGPENDING + #define __ARCH_WANT_SYS_SIGPROCMASK + #define __ARCH_WANT_SYS_RT_SIGACTION ++#define __ARCH_WANT_SYS_RT_SIGSUSPEND + + /* + * "Conditional" syscalls diff --git a/target/linux/etrax/patches/cris/002-arch-cris.patch b/target/linux/etrax/patches/cris/002-arch-cris.patch new file mode 100644 index 0000000000..ee35210cd5 --- /dev/null +++ b/target/linux/etrax/patches/cris/002-arch-cris.patch @@ -0,0 +1,24914 @@ +diff -urN linux-2.6.19.2.old/arch/cris/Kconfig linux-2.6.19.2.dev/arch/cris/Kconfig +--- linux-2.6.19.2.old/arch/cris/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/Kconfig 2007-01-17 18:17:18.000000000 +0100 +@@ -16,6 +16,10 @@ + config RWSEM_XCHGADD_ALGORITHM + bool + ++config GENERIC_IOMAP ++ bool ++ default y ++ + config GENERIC_FIND_NEXT_BIT + bool + default y +@@ -42,6 +46,29 @@ + + source "fs/Kconfig.binfmt" + ++config GENERIC_HARDIRQS ++ bool ++ default y ++ ++config SMP ++ bool "SMP" ++ help ++ SMP support. Always Say N. ++ ++config NR_CPUS ++ int ++ depends on SMP ++ default 2 ++ ++config SCHED_MC ++ bool "Multi-core scheduler support" ++ depends on SMP ++ default y ++ help ++ Multi-core scheduler support improves the CPU scheduler's decision ++ making when dealing with multi-core CPU chips at a cost of slightly ++ increased overhead in some places. If unsure say N here. ++ + config ETRAX_CMDLINE + string "Kernel command line" + default "root=/dev/mtdblock3" +@@ -70,17 +97,11 @@ + timers). + This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled. + +-config PREEMPT +- bool "Preemptible Kernel" +- help +- This option reduces the latency of the kernel when reacting to +- real-time or interactive events by allowing a low priority process to +- be preempted even if it is in kernel mode executing a system call. +- This allows applications to run more reliably even when the system is +- under load. ++config OOM_REBOOT ++ bool "Enable reboot at out of memory" + +- Say Y here if you are building a kernel for a desktop, embedded +- or real-time system. Say N if you are unsure. ++source "kernel/Kconfig.preempt" ++source "kernel/Kconfig.sched" + + source mm/Kconfig + +@@ -107,6 +128,16 @@ + help + Support the xsim ETRAX Simulator. + ++config ETRAXFS ++ bool "ETRAX-FS-V32" ++ help ++ Support CRIS V32. ++ ++config ETRAXFS_SIM ++ bool "ETRAX-FS-V32-Simulator" ++ help ++ Support CRIS V32 VCS simualtor. ++ + endchoice + + config ETRAX_ARCH_V10 +@@ -114,6 +145,11 @@ + default y if ETRAX100LX || ETRAX100LX_V2 + default n if !(ETRAX100LX || ETRAX100LX_V2) + ++config ETRAX_ARCH_V32 ++ bool ++ default y if ETRAXFS || ETRAXFS_SIM ++ default n if !(ETRAXFS || ETRAXFS_SIM) ++ + config ETRAX_DRAM_SIZE + int "DRAM size (dec, in MB)" + default "8" +@@ -121,12 +157,23 @@ + Size of DRAM (decimal in MB) typically 2, 8 or 16. + + config ETRAX_FLASH_BUSWIDTH +- int "Buswidth of flash in bytes" ++ int "Buswidth of NOR flash in bytes" + default "2" + help +- Width in bytes of the Flash bus (1, 2 or 4). Is usually 2. ++ Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2. + +-source arch/cris/arch-v10/Kconfig ++config ETRAX_NANDFLASH_BUSWIDTH ++ int "Buswidth of NAND flash in bytes" ++ default "1" ++ help ++ Width in bytes of the NAND flash (1 or 2). ++ ++config ETRAX_FLASH1_SIZE ++ int "FLASH1 size (dec, in MB. 0 = Unknown)" ++ default "0" ++ ++# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) ++source arch/cris/arch/Kconfig + + endmenu + +@@ -134,7 +181,8 @@ + + # bring in ETRAX built-in drivers + menu "Drivers for built-in interfaces" +-source arch/cris/arch-v10/drivers/Kconfig ++# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32) ++source arch/cris/arch/drivers/Kconfig + + endmenu + +@@ -181,6 +229,10 @@ + + source "sound/Kconfig" + ++source "drivers/pcmcia/Kconfig" ++ ++source "drivers/pci/Kconfig" ++ + source "drivers/usb/Kconfig" + + source "arch/cris/Kconfig.debug" +diff -urN linux-2.6.19.2.old/arch/cris/Kconfig.debug linux-2.6.19.2.dev/arch/cris/Kconfig.debug +--- linux-2.6.19.2.old/arch/cris/Kconfig.debug 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/Kconfig.debug 2005-10-31 09:48:02.000000000 +0100 +@@ -1,14 +1,15 @@ + menu "Kernel hacking" + ++source "lib/Kconfig.debug" ++ + #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC ++ + config PROFILING + bool "Kernel profiling support" + + config SYSTEM_PROFILER + bool "System profiling support" + +-source "lib/Kconfig.debug" +- + config ETRAX_KGDB + bool "Use kernel GDB debugger" + depends on DEBUG_KERNEL +diff -urN linux-2.6.19.2.old/arch/cris/Makefile linux-2.6.19.2.dev/arch/cris/Makefile +--- linux-2.6.19.2.old/arch/cris/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/Makefile 2006-11-29 17:05:40.000000000 +0100 +@@ -1,4 +1,4 @@ +-# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $ ++# $Id: Makefile,v 1.41 2006/11/29 16:05:40 ricardw Exp $ + # cris/Makefile + # + # This file is included by the global makefile so that you can add your own +@@ -10,14 +10,11 @@ + # License. See the file "COPYING" in the main directory of this archive + # for more details. + +-# A bug in ld prevents us from having a (constant-value) symbol in a +-# "ORIGIN =" or "LENGTH =" expression. +- + arch-y := v10 + arch-$(CONFIG_ETRAX_ARCH_V10) := v10 + arch-$(CONFIG_ETRAX_ARCH_V32) := v32 + +-# No config avaiable for make clean etc ++# No config available for make clean etc + ifneq ($(arch-y),) + SARCH := arch-$(arch-y) + else +@@ -52,79 +49,58 @@ + # cris object files path + OBJ_ARCH = $(objtree)/arch/$(ARCH) + +-target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot +-target_boot_dir = $(OBJ_ARCH)/boot +-src_boot_dir = $(SRC_ARCH)/boot +-target_compressed_dir = $(OBJ_ARCH)/boot/compressed +-src_compressed_dir = $(SRC_ARCH)/boot/compressed +-target_rescue_dir = $(OBJ_ARCH)/boot/rescue +-src_rescue_dir = $(SRC_ARCH)/boot/rescue +- +-export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir +- +-vmlinux.bin: vmlinux +- $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin +- +-timage: vmlinux.bin +- cat vmlinux.bin cramfs.img >timage +- +-simimage: timage +- cp vmlinux.bin simvmlinux.bin +- +-# the following will remake timage without compiling the kernel +-# it does of course require that all object files exist... +- +-cramfs: +-## cramfs - Creates a cramfs image +- mkcramfs -b 8192 -m romfs_meta.txt root cramfs.img +- cat vmlinux.bin cramfs.img >timage +- +-clinux: vmlinux.bin decompress.bin rescue.bin +- +-decompress.bin: $(target_boot_dir) +- @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin +- +-$(target_rescue_dir)/rescue.bin: $(target_boot_dir) +- @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin ++boot := arch/$(ARCH)/boot ++MACHINE := arch/$(ARCH)/$(SARCH) + +-zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin +-## zImage - Compressed kernel (gzip) +- @$(MAKE) -f $(src_boot_dir)/Makefile zImage ++all: zImage + +-$(target_boot_dir): $(target_boot_arch_dir) +- ln -sfn $< $@ +- +-$(target_boot_arch_dir): +- mkdir -p $@ +- +-compressed: zImage +- +-archmrproper: +-archclean: +- @if [ -d arch/$(ARCH)/boot ]; then \ +- $(MAKE) $(clean)=arch/$(ARCH)/boot ; \ +- fi +- rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img +- rm -rf $(LD_SCRIPT).tmp ++zImage Image: vmlinux ++ $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + + archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch + + # Create some links to make all tools happy + $(SRC_ARCH)/.links: + @rm -rf $(SRC_ARCH)/drivers +- @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers ++ @ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers + @rm -rf $(SRC_ARCH)/boot +- @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot ++ @ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot + @rm -rf $(SRC_ARCH)/lib +- @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib +- @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch +- @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S +- @ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c ++ @ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib ++ @rm -rf $(SRC_ARCH)/arch ++ @ln -sfn $(SARCH) $(SRC_ARCH)/arch ++ @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S ++ @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S ++ @rm -rf $(SRC_ARCH)/kernel/asm-offsets.c ++ @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c + @touch $@ + + # Create link to sub arch includes + $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) +- @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink' ++ @echo ' SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)' + @rm -f include/asm-$(ARCH)/arch +- @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch ++ @ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch + @touch $@ ++ ++archclean: ++ $(Q)if [ -e arch/$(ARCH)/boot ]; then \ ++ $(MAKE) $(clean)=arch/$(ARCH)/boot; \ ++ fi ++ ++CLEAN_FILES += \ ++ $(MACHINE)/boot/zImage \ ++ $(SRC_ARCH)/.links \ ++ $(srctree)/include/asm-$(ARCH)/.arch ++ ++MRPROPER_FILES += \ ++ $(SRC_ARCH)/drivers \ ++ $(SRC_ARCH)/boot \ ++ $(SRC_ARCH)/lib \ ++ $(SRC_ARCH)/arch \ ++ $(SRC_ARCH)/kernel/vmlinux.lds.S \ ++ $(SRC_ARCH)/kernel/asm-offsets.c ++ ++define archhelp ++ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)' ++ echo '* Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)' ++endef +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/README.mm linux-2.6.19.2.dev/arch/cris/arch-v10/README.mm +--- linux-2.6.19.2.old/arch/cris/arch-v10/README.mm 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/README.mm 2005-08-23 11:44:32.000000000 +0200 +@@ -3,6 +3,9 @@ + HISTORY: + + $Log: README.mm,v $ ++Revision 1.2 2005/08/23 09:44:32 starvik ++extern inline -> static inline. Patch provided by Adrian Bunk <bunk@stusta.de> ++ + Revision 1.1 2001/12/17 13:59:27 bjornw + Initial revision + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/Makefile 2006-11-29 17:05:40.000000000 +0100 +@@ -1,13 +1,21 @@ + # +-# arch/cris/boot/Makefile ++# arch/cris/arch-v10/boot/Makefile + # +-target = $(target_boot_dir) +-src = $(src_boot_dir) + +-zImage: compressed/vmlinuz ++OBJCOPY = objcopy-cris ++OBJCOPYFLAGS = -O binary --remove-section=.bss + +-compressed/vmlinuz: +- @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz ++subdir- := compressed rescue ++targets := Image + +-clean: +- @$(MAKE) -f $(src)/compressed/Makefile clean ++$(obj)/Image: vmlinux FORCE ++ $(call if_changed,objcopy) ++ @echo ' Kernel: $@ is ready' ++ ++$(obj)/compressed/vmlinux: $(obj)/Image FORCE ++ $(Q)$(MAKE) $(build)=$(obj)/compressed $@ ++ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin ++ ++$(obj)/zImage: $(obj)/compressed/vmlinux ++ @cp $< $@ ++ @echo ' Kernel: $@ is ready' +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/Makefile 2006-10-11 17:47:04.000000000 +0200 +@@ -1,45 +1,34 @@ + # +-# create a compressed vmlinuz image from the binary vmlinux.bin file ++# arch/cris/arch-v10/boot/compressed/Makefile + # +-target = $(target_compressed_dir) +-src = $(src_compressed_dir) + + CC = gcc-cris -melf $(LINUXINCLUDE) + CFLAGS = -O2 + LD = ld-cris ++LDFLAGS = -T $(obj)/decompress.ld ++OBJECTS = $(obj)/head.o $(obj)/misc.o + OBJCOPY = objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss +-OBJECTS = $(target)/head.o $(target)/misc.o + +-# files to compress +-SYSTEM = $(objtree)/vmlinux.bin ++quiet_cmd_image = BUILD $@ ++cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ + +-all: $(target_compressed_dir)/vmlinuz ++targets := vmlinux piggy.gz decompress.o decompress.bin + +-$(target)/decompress.bin: $(OBJECTS) +- $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) +- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin ++$(obj)/decompress.o: $(OBJECTS) FORCE ++ $(call if_changed,ld) + +-# Create vmlinuz image in top-level build directory +-$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin +- @echo " COMPR vmlinux.bin --> vmlinuz" +- @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz +- @rm -f piggy.img ++$(obj)/decompress.bin: $(obj)/decompress.o FORCE ++ $(call if_changed,objcopy) + +-$(target)/head.o: $(src)/head.S +- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ ++$(obj)/head.o: $(obj)/head.S .config ++ @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ + +-$(target)/misc.o: $(src)/misc.c +- $(CC) -D__KERNEL__ -c $< -o $@ ++$(obj)/misc.o: $(obj)/misc.c .config ++ @$(CC) -D__KERNEL__ -c $< -o $@ + +-# gzip the kernel image +- +-piggy.img: $(SYSTEM) +- @cat $(SYSTEM) | gzip -f -9 > piggy.img +- +-$(target): +- mkdir -p $(target) +- +-clean: +- rm -f piggy.img $(objtree)/vmlinuz ++$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE ++ $(call if_changed,image) + ++$(obj)/piggy.gz: $(obj)/../Image FORCE ++ $(call if_changed,gzip) +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/misc.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/misc.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/misc.c 2006-10-13 14:43:10.000000000 +0200 +@@ -1,7 +1,7 @@ + /* + * misc.c + * +- * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $ ++ * $Id: misc.c,v 1.7 2006/10/13 12:43:10 starvik Exp $ + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/Makefile 2006-11-30 11:42:39.000000000 +0100 +@@ -1,56 +1,38 @@ + # +-# Makefile for rescue code ++# Makefile for rescue (bootstrap) code + # +-target = $(target_rescue_dir) +-src = $(src_rescue_dir) + + CC = gcc-cris -mlinux $(LINUXINCLUDE) + CFLAGS = -O2 +-LD = gcc-cris -mlinux -nostdlib ++AFLAGS = -traditional ++LD = gcc-cris -mlinux -nostdlib ++LDFLAGS = -T $(obj)/rescue.ld + OBJCOPY = objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss ++obj-y = head.o ++OBJECT = $(obj)/$(obj-y) + +-all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin ++targets := rescue.o rescue.bin + +-$(target)/rescue.bin: $(target) $(target)/head.o +- $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o +- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin +-# Place a copy in top-level build directory +- cp -p $(target)/rescue.bin $(objtree) ++$(obj)/rescue.o: $(OBJECT) FORCE ++ $(call if_changed,ld) + +-$(target)/testrescue.bin: $(target) $(target)/testrescue.o +- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin ++$(obj)/rescue.bin: $(obj)/rescue.o FORCE ++ $(call if_changed,objcopy) ++ cp -p $(obj)/rescue.bin $(objtree) ++ ++$(obj)/testrescue.bin: $(obj)/testrescue.o ++ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin + # Pad it to 784 bytes + dd if=/dev/zero of=tmp2423 bs=1 count=784 + cat tr.bin tmp2423 >testrescue_tmp.bin +- dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784 ++ dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784 + rm tr.bin tmp2423 testrescue_tmp.bin + +-$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o +- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin ++$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o ++ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin + # Pad it to 784 bytes, that's what the rescue loader expects + dd if=/dev/zero of=tmp2423 bs=1 count=784 + cat ktr.bin tmp2423 >kimagerescue_tmp.bin +- dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784 ++ dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784 + rm ktr.bin tmp2423 kimagerescue_tmp.bin +- +-$(target): +- mkdir -p $(target) +- +-$(target)/head.o: $(src)/head.S +- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o +- +-$(target)/testrescue.o: $(src)/testrescue.S +- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o +- +-$(target)/kimagerescue.o: $(src)/kimagerescue.S +- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o +- +-clean: +- rm -f $(target)/*.o $(target)/*.bin +- +-fastdep: +- +-modules: +- +-modules-install: +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/head.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/head.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/head.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/head.S 2006-10-13 14:43:10.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: head.S,v 1.7 2005/03/07 12:11:06 starvik Exp $ ++/* $Id: head.S,v 1.9 2006/10/13 12:43:10 starvik Exp $ + * + * Rescue code, made to reside at the beginning of the + * flash-memory. when it starts, it checks a partition +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/kimagerescue.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/kimagerescue.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/kimagerescue.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/kimagerescue.S 2006-11-29 17:05:41.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++/* $Id: kimagerescue.S,v 1.3 2006/11/29 16:05:41 ricardw Exp $ + * + * Rescue code to be prepended on a kimage and copied to the + * rescue serial port. +@@ -7,7 +7,7 @@ + */ + + #define ASSEMBLER_MACROS_ONLY +-#include <asm/sv_addr_ag.h> ++#include <asm/arch/sv_addr_ag.h> + + #define CODE_START 0x40004000 + #define CODE_LENGTH 784 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/testrescue.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/testrescue.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/testrescue.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/testrescue.S 2006-11-29 17:05:41.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++/* $Id: testrescue.S,v 1.2 2006/11/29 16:05:41 ricardw Exp $ + * + * Simple testcode to download by the rescue block. + * Just lits some LEDs to show it was downloaded correctly. +@@ -7,7 +7,7 @@ + */ + + #define ASSEMBLER_MACROS_ONLY +-#include <asm/sv_addr_ag.h> ++#include <asm/arch/sv_addr_ag.h> + + .text + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/defconfig linux-2.6.19.2.dev/arch/cris/arch-v10/defconfig +--- linux-2.6.19.2.old/arch/cris/arch-v10/defconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/defconfig 2006-01-03 15:48:23.000000000 +0100 +@@ -106,7 +106,6 @@ + CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y + # CONFIG_ETRAX_I2C_EEPROM is not set + CONFIG_ETRAX_GPIO=y +-CONFIG_ETRAX_PA_BUTTON_BITMASK=02 + CONFIG_ETRAX_PA_CHANGEABLE_DIR=00 + CONFIG_ETRAX_PA_CHANGEABLE_BITS=FF + CONFIG_ETRAX_PB_CHANGEABLE_DIR=00 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Kconfig +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Kconfig 2007-01-09 10:29:18.000000000 +0100 +@@ -6,6 +6,12 @@ + This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet + controller. + ++config ETRAX_NO_PHY ++ bool "PHY not present" ++ depends on ETRAX_ETHERNET ++ help ++ Enable if PHY is not present. ++ + choice + prompt "Network LED behavior" + depends on ETRAX_ETHERNET +@@ -90,7 +96,7 @@ + + config ETRAX_SERIAL_PORT0_DMA6_OUT + bool "DMA 6" +- ++ depends on !ETRAX_DEBUG_PORT0 + endchoice + + choice +@@ -103,7 +109,7 @@ + + config ETRAX_SERIAL_PORT0_DMA7_IN + bool "DMA 7" +- ++ depends on !ETRAX_DEBUG_PORT0 + endchoice + + choice +@@ -204,7 +210,7 @@ + + config ETRAX_SERIAL_PORT1_DMA8_OUT + bool "DMA 8" +- ++ depends on !ETRAX_DEBUG_PORT1 + endchoice + + choice +@@ -217,7 +223,7 @@ + + config ETRAX_SERIAL_PORT1_DMA9_IN + bool "DMA 9" +- ++ depends on !ETRAX_DEBUG_PORT1 + endchoice + + choice +@@ -321,7 +327,7 @@ + + config ETRAX_SERIAL_PORT2_DMA2_OUT + bool "DMA 2" +- ++ depends on !ETRAX_DEBUG_PORT2 + endchoice + + choice +@@ -334,7 +340,7 @@ + + config ETRAX_SERIAL_PORT2_DMA3_IN + bool "DMA 3" +- ++ depends on !ETRAX_DEBUG_PORT2 + endchoice + + choice +@@ -435,7 +441,7 @@ + + config ETRAX_SERIAL_PORT3_DMA4_OUT + bool "DMA 4" +- ++ depends on !ETRAX_DEBUG_PORT3 + endchoice + + choice +@@ -448,7 +454,7 @@ + + config ETRAX_SERIAL_PORT3_DMA5_IN + bool "DMA 5" +- ++ depends on !ETRAX_DEBUG_PORT3 + endchoice + + choice +@@ -514,8 +520,7 @@ + bool "RS-485 support" + depends on ETRAX_SERIAL + help +- Enables support for RS-485 serial communication. For a primer on +- RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>. ++ Enables support for RS-485 serial communication. + + config ETRAX_RS485_ON_PA + bool "RS-485 mode on PA" +@@ -541,6 +546,27 @@ + loopback. Not all products are able to do this in software only. + Axis 2400/2401 must disable receiver. + ++config ETRAX_SYNCHRONOUS_SERIAL ++ bool "Synchronous serial port driver" ++ help ++ Select this to enable the synchronous serial port driver. ++ ++config ETRAX_SYNCHRONOUS_SERIAL_PORT0 ++ bool "Synchronous serial port 0 enabled (sser1)" ++ depends on ETRAX_SYNCHRONOUS_SERIAL ++ ++config ETRAX_SYNCHRONOUS_SERIAL0_DMA ++ bool "Use DMA for synchronous serial port 0" ++ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0 ++ ++config ETRAX_SYNCHRONOUS_SERIAL_PORT1 ++ bool "Synchronous serial port 1 enabled (sser3)" ++ depends on ETRAX_SYNCHRONOUS_SERIAL ++ ++config ETRAX_SYNCHRONOUS_SERIAL1_DMA ++ bool "Use DMA for synchronous serial port 1" ++ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1 ++ + config ETRAX_IDE + bool "ATA/IDE support" + select IDE +@@ -604,8 +630,7 @@ + select MTD + select MTD_CFI + select MTD_CFI_AMDSTD +- select MTD_OBSOLETE_CHIPS +- select MTD_AMDSTD ++ select MTD_JEDECPROBE + select MTD_CHAR + select MTD_BLOCK + select MTD_PARTITIONS +@@ -615,6 +640,15 @@ + This option enables MTD mapping of flash devices. Needed to use + flash memories. If unsure, say Y. + ++config ETRAX_AXISFLASHMAP_MTD0WHOLE ++ bool "MTD0 is whole boot flash device" ++ depends on ETRAX_AXISFLASHMAP ++ default N ++ help ++ When this option is not set, mtd0 refers to the first partition ++ on the boot flash device. When set, mtd0 refers to the whole ++ device, with mtd1 referring to the first partition etc. ++ + config ETRAX_PTABLE_SECTOR + int "Byte-offset of partition table sector" + depends on ETRAX_AXISFLASHMAP +@@ -715,19 +749,6 @@ + Remember that you need to setup the port directions appropriately in + the General configuration. + +-config ETRAX_PA_BUTTON_BITMASK +- hex "PA-buttons bitmask" +- depends on ETRAX_GPIO +- default "02" +- help +- This is a bitmask with information about what bits on PA that +- are used for buttons. +- Most products has a so called TEST button on PA1, if that's true +- use 02 here. +- Use 00 if there are no buttons on PA. +- If the bitmask is <> 00 a button driver will be included in the gpio +- driver. ETRAX general I/O support must be enabled. +- + config ETRAX_PA_CHANGEABLE_DIR + hex "PA user changeable dir mask" + depends on ETRAX_GPIO +@@ -768,6 +789,40 @@ + Bit set = changeable. + You probably want 00 here. + ++config ETRAX_DEF_R_PORT_G_DIR ++ bool "Port G Output" ++ help ++ CONFIG_ETRAX_DEF_R_PORT_G_DIR: ++ Set the direction of specified pins to output. ++ ++config ETRAX_DEF_R_PORT_G0_DIR_OUT ++ bool "G0" ++ depends on ETRAX_DEF_R_PORT_G_DIR ++ help ++ CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT: ++ Set G0 to output. ++ ++config ETRAX_DEF_R_PORT_G8_15_DIR_OUT ++ bool "G8-G15" ++ depends on ETRAX_DEF_R_PORT_G_DIR ++ help ++ CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT: ++ Set G8-G15 to output. ++ ++config ETRAX_DEF_R_PORT_G16_23_DIR_OUT ++ bool "G16-G23" ++ depends on ETRAX_DEF_R_PORT_G_DIR ++ help ++ CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT: ++ Set G16-G23 to output. ++ ++config ETRAX_DEF_R_PORT_G24_DIR_OUT ++ bool "G24" ++ depends on ETRAX_DEF_R_PORT_G_DIR ++ help ++ CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT: ++ Set G24 to output. ++ + config ETRAX_RTC + bool "Real Time Clock support" + depends on ETRAX_ARCH_V10 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Makefile 2005-12-12 10:05:46.000000000 +0100 +@@ -8,5 +8,5 @@ + obj-$(CONFIG_ETRAX_GPIO) += gpio.o + obj-$(CONFIG_ETRAX_DS1302) += ds1302.o + obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o +- ++obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/axisflashmap.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/axisflashmap.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/axisflashmap.c 2006-11-22 13:26:55.000000000 +0100 +@@ -11,6 +11,26 @@ + * partition split defined below. + * + * $Log: axisflashmap.c,v $ ++ * Revision 1.17 2006/11/22 12:26:55 ricardw ++ * Added CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE option which when enabled puts mtd0 ++ * as whole device, with first partition at mtd1, etc. ++ * ++ * Revision 1.16 2006/10/30 15:17:57 pkj ++ * Avoid a compiler warning. ++ * ++ * Revision 1.15 2006/10/13 12:43:10 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.14 2006/08/30 13:20:00 karljope ++ * Do not use deprecated amd_flash to probe flash memory. ++ * Probe for flash chip with CFI first and if no chip was found try jedec_probe. ++ * ++ * Revision 1.13 2006/01/04 06:09:45 starvik ++ * Merge of Linux 2.6.15 ++ * ++ * Revision 1.12 2005/06/21 09:13:06 starvik ++ * Change const char* to const char[] to save space (from domen@coderock.org). ++ * + * Revision 1.11 2004/11/15 10:27:14 starvik + * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>). + * +@@ -300,6 +320,15 @@ + }, + }; + ++#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE ++/* Main flash device */ ++static struct mtd_partition main_partition = { ++ .name = "main", ++ .size = 0, ++ .offset = 0 ++}; ++#endif ++ + /* + * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash + * chips in that order (because the amd_flash-driver is faster). +@@ -312,12 +341,12 @@ + "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", + map_cs->name, map_cs->size, map_cs->map_priv_1); + +-#ifdef CONFIG_MTD_AMDSTD +- mtd_cs = do_map_probe("amd_flash", map_cs); +-#endif + #ifdef CONFIG_MTD_CFI ++ mtd_cs = do_map_probe("cfi_probe", map_cs); ++#endif ++#ifdef CONFIG_MTD_JEDECPROBE + if (!mtd_cs) { +- mtd_cs = do_map_probe("cfi_probe", map_cs); ++ mtd_cs = do_map_probe("jedec_probe", map_cs); + } + #endif + +@@ -396,7 +425,7 @@ + struct partitiontable_head *ptable_head = NULL; + struct partitiontable_entry *ptable; + int use_default_ptable = 1; /* Until proven otherwise. */ +- const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n"; ++ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; + + if (!(mymtd = flash_probe())) { + /* There's no reason to use this module if no flash chip can +@@ -491,6 +520,16 @@ + pidx++; + } + ++#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE ++ if (mymtd) { ++ main_partition.size = mymtd->size; ++ err = add_mtd_partitions(mymtd, &main_partition, 1); ++ if (err) ++ panic("axisflashmap: Could not initialize " ++ "partition for whole main mtd device!\n"); ++ } ++#endif ++ + if (mymtd) { + if (use_default_ptable) { + printk(KERN_INFO " Using default partition table.\n"); +@@ -524,7 +563,7 @@ + } + + printk(KERN_INFO " Adding RAM partition for romfs image:\n"); +- printk(pmsg, pidx, romfs_start, romfs_length); ++ printk(pmsg, pidx, (unsigned)romfs_start, (unsigned)romfs_length); + + err = mtdram_init_device(mtd_ram, (void*)romfs_start, + romfs_length, "romfs"); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/ds1302.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/ds1302.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/ds1302.c 2006-10-27 16:31:23.000000000 +0200 +@@ -6,136 +6,9 @@ + *! + *! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init + *! +-*! $Log: ds1302.c,v $ +-*! Revision 1.18 2005/01/24 09:11:26 mikaelam +-*! Minor changes to get DS1302 RTC chip driver to work +-*! +-*! Revision 1.17 2005/01/05 06:11:22 starvik +-*! No need to do local_irq_disable after local_irq_save. +-*! +-*! Revision 1.16 2004/12/13 12:21:52 starvik +-*! Added I/O and DMA allocators from Linux 2.4 +-*! +-*! Revision 1.14 2004/08/24 06:48:43 starvik +-*! Whitespace cleanup +-*! +-*! Revision 1.13 2004/05/28 09:26:59 starvik +-*! Modified I2C initialization to work in 2.6. +-*! +-*! Revision 1.12 2004/05/14 07:58:03 starvik +-*! Merge of changes from 2.4 +-*! +-*! Revision 1.10 2004/02/04 09:25:12 starvik +-*! Merge of Linux 2.6.2 +-*! +-*! Revision 1.9 2003/07/04 08:27:37 starvik +-*! Merge of Linux 2.5.74 +-*! +-*! Revision 1.8 2003/04/09 05:20:47 starvik +-*! Merge of Linux 2.5.67 +-*! +-*! Revision 1.6 2003/01/09 14:42:51 starvik +-*! Merge of Linux 2.5.55 +-*! +-*! Revision 1.4 2002/12/11 13:13:57 starvik +-*! Added arch/ to v10 specific includes +-*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) +-*! +-*! Revision 1.3 2002/11/20 11:56:10 starvik +-*! Merge of Linux 2.5.48 +-*! +-*! Revision 1.2 2002/11/18 13:16:06 starvik +-*! Linux 2.5 port of latest 2.4 drivers +-*! +-*! Revision 1.15 2002/10/11 16:14:33 johana +-*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the +-*! trcklecharge register. +-*! +-*! Revision 1.14 2002/10/10 12:15:38 magnusmn +-*! Added support for having the RST signal on bit g0 +-*! +-*! Revision 1.13 2002/05/29 15:16:08 johana +-*! Removed unused variables. +-*! +-*! Revision 1.12 2002/04/10 15:35:25 johana +-*! Moved probe function closer to init function and marked it __init. +-*! +-*! Revision 1.11 2001/06/14 12:35:52 jonashg +-*! The ATA hack is back. It is unfortunately the only way to set g27 to output. +-*! +-*! Revision 1.9 2001/06/14 10:00:14 jonashg +-*! No need for tempudelay to be inline anymore (had to adjust the usec to +-*! loops conversion because of this to make it slow enough to be a udelay). +-*! +-*! Revision 1.8 2001/06/14 08:06:32 jonashg +-*! Made tempudelay delay usecs (well, just a tad more). +-*! +-*! Revision 1.7 2001/06/13 14:18:11 jonashg +-*! Only allow processes with SYS_TIME capability to set time and charge. +-*! +-*! Revision 1.6 2001/06/12 15:22:07 jonashg +-*! * Made init function __init. +-*! * Parameter to out_byte() is unsigned char. +-*! * The magic number 42 has got a name. +-*! * Removed comment about /proc (nothing is exported there). +-*! +-*! Revision 1.5 2001/06/12 14:35:13 jonashg +-*! Gave the module a name and added it to printk's. +-*! +-*! Revision 1.4 2001/05/31 14:53:40 jonashg +-*! Made tempudelay() inline so that the watchdog doesn't reset (see +-*! function comment). +-*! +-*! Revision 1.3 2001/03/26 16:03:06 bjornw +-*! Needs linux/config.h +-*! +-*! Revision 1.2 2001/03/20 19:42:00 bjornw +-*! Use the ETRAX prefix on the DS1302 options +-*! +-*! Revision 1.1 2001/03/20 09:13:50 magnusmn +-*! Linux 2.4 port +-*! +-*! Revision 1.10 2000/07/05 15:38:23 bjornw +-*! Dont update kernel time when a RTC_SET_TIME is done +-*! +-*! Revision 1.9 2000/03/02 15:42:59 macce +-*! * Hack to make RTC work on all 2100/2400 +-*! +-*! Revision 1.8 2000/02/23 16:59:18 torbjore +-*! added setup of R_GEN_CONFIG when RTC is connected to the generic port. +-*! +-*! Revision 1.7 2000/01/17 15:51:43 johana +-*! Added RTC_SET_CHARGE ioctl to enable trickle charger. +-*! +-*! Revision 1.6 1999/10/27 13:19:47 bjornw +-*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel. +-*! /dev/rtc calls it now. +-*! +-*! Revision 1.5 1999/10/27 12:39:37 bjornw +-*! Disabled superuser check. Anyone can now set the time. +-*! +-*! Revision 1.4 1999/09/02 13:27:46 pkj +-*! Added shadow for R_PORT_PB_CONFIG. +-*! Renamed port_g_shadow to port_g_data_shadow. +-*! +-*! Revision 1.3 1999/09/02 08:28:06 pkj +-*! Made it possible to select either port PB or the generic port for the RST +-*! signal line to the DS1302 RTC. +-*! Also make sure the RST bit is configured as output on Port PB (if used). +-*! +-*! Revision 1.2 1999/09/01 14:47:20 bjornw +-*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read +-*! and set the date. Register as major 121. +-*! +-*! Revision 1.1 1999/09/01 09:45:29 bjornw +-*! Implemented a DS1302 RTC driver. +-*! +-*! + *! --------------------------------------------------------------------------- + *! +-*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN +-*! +-*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $ ++*! (C) Copyright 1999-2006 Axis Communications AB, LUND, SWEDEN + *! + *!***************************************************************************/ + +@@ -305,14 +178,7 @@ + void + ds1302_writereg(int reg, unsigned char val) + { +-#ifndef CONFIG_ETRAX_RTC_READONLY + int do_writereg = 1; +-#else +- int do_writereg = 0; +- +- if (reg == RTC_TRICKLECHARGER) +- do_writereg = 1; +-#endif + + if (do_writereg) { + ds1302_wenable(); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/eeprom.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/eeprom.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/eeprom.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/eeprom.c 2006-10-13 14:43:10.000000000 +0200 +@@ -20,6 +20,9 @@ + *! in the spin-lock. + *! + *! $Log: eeprom.c,v $ ++*! Revision 1.13 2006/10/13 12:43:10 starvik ++*! Merge of 2.6.18 ++*! + *! Revision 1.12 2005/06/19 17:06:46 starvik + *! Merge of Linux 2.6.12. + *! +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/gpio.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/gpio.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/gpio.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/gpio.c 2007-02-05 12:54:34.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $ ++/* $Id: gpio.c,v 1.28 2007/02/05 11:54:34 pkj Exp $ + * + * Etrax general port I/O device + * +@@ -9,6 +9,40 @@ + * Johan Adolfsson (read/set directions, write, port G) + * + * $Log: gpio.c,v $ ++ * Revision 1.28 2007/02/05 11:54:34 pkj ++ * Merge of Linux 2.6.19 ++ * ++ * Revision 1.27 2006/12/12 11:08:30 edgar ++ * In etrax_gpio_wake_up_check(), make flags unsigned long. ++ * ++ * Revision 1.26 2006/11/02 10:54:29 pkj ++ * Restored unique device id for request_irq() which was lost in the ++ * merge of 2.6.18. ++ * ++ * Revision 1.25 2006/10/13 12:43:10 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.24 2006/07/13 07:42:20 starvik ++ * Set unique device id in request_irq ++ * ++ * Revision 1.23 2006/06/21 09:38:46 starvik ++ * Use correct spinlock macros ++ * ++ * Revision 1.22 2005/08/29 07:32:16 starvik ++ * Merge of 2.6.13 ++ * ++ * Revision 1.21 2005/08/16 17:10:54 edgar ++ * dont leave locked spinlocks when returning. ++ * ++ * Revision 1.20 2005/08/15 13:10:47 orjanf ++ * Don't link struct into alarmlist until fully initialized. ++ * ++ * Revision 1.19 2005/07/13 11:43:11 karljope ++ * Corrected typo ++ * ++ * Revision 1.18 2005/06/21 12:26:53 starvik ++ * Improved alarm list locking. ++ * + * Revision 1.17 2005/06/19 17:06:46 starvik + * Merge of Linux 2.6.12. + * +@@ -277,7 +311,7 @@ + unsigned int mask = 0; + struct gpio_private *priv = (struct gpio_private *)file->private_data; + unsigned long data; +- spin_lock(&gpio_lock); ++ spin_lock_irq(&gpio_lock); + poll_wait(file, &priv->alarm_wq, wait); + if (priv->minor == GPIO_MINOR_A) { + unsigned long flags; +@@ -297,15 +331,17 @@ + data = *R_PORT_PB_DATA; + else if (priv->minor == GPIO_MINOR_G) + data = *R_PORT_G_DATA; +- else ++ else { ++ spin_unlock_irq(&gpio_lock); + return 0; ++ } + + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + mask = POLLIN|POLLRDNORM; + } + +- spin_unlock(&gpio_lock); ++ spin_unlock_irq(&gpio_lock); + + DP(printk("gpio_poll ready: mask 0x%08X\n", mask)); + +@@ -314,10 +350,12 @@ + + int etrax_gpio_wake_up_check(void) + { +- struct gpio_private *priv = alarmlist; ++ struct gpio_private *priv; + unsigned long data = 0; + int ret = 0; +- spin_lock(&gpio_lock); ++ unsigned long flags; ++ spin_lock_irqsave(&gpio_lock, flags); ++ priv = alarmlist; + while (priv) { + if (USE_PORTS(priv)) { + data = *priv->port; +@@ -332,12 +370,12 @@ + } + priv = priv->next; + } +- spin_unlock(&gpio_lock); ++ spin_unlock_irqrestore(&gpio_lock, flags); + return ret; + } + + static irqreturn_t +-gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++gpio_poll_timer_interrupt(int irq, void *dev_id) + { + if (gpio_some_alarms) { + etrax_gpio_wake_up_check(); +@@ -347,7 +385,7 @@ + } + + static irqreturn_t +-gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++gpio_pa_interrupt(int irq, void *dev_id) + { + unsigned long tmp; + spin_lock(&gpio_lock); +@@ -376,9 +414,6 @@ + struct gpio_private *priv = (struct gpio_private *)file->private_data; + unsigned char data, clk_mask, data_mask, write_msb; + unsigned long flags; +- +- spin_lock(&gpio_lock); +- + ssize_t retval = count; + if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) { + return -EFAULT; +@@ -394,6 +429,7 @@ + if (clk_mask == 0 || data_mask == 0) { + return -EPERM; + } ++ spin_lock_irq(&gpio_lock); + write_msb = priv->write_msb; + D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb)); + while (count--) { +@@ -425,7 +461,7 @@ + } + } + } +- spin_unlock(&gpio_lock); ++ spin_unlock_irq(&gpio_lock); + return retval; + } + +@@ -445,13 +481,12 @@ + + if (!priv) + return -ENOMEM; ++ memset(priv, 0, sizeof(*priv)); + + priv->minor = p; + +- /* initialize the io/alarm struct and link it into our alarmlist */ ++ /* initialize the io/alarm struct */ + +- priv->next = alarmlist; +- alarmlist = priv; + if (USE_PORTS(priv)) { /* A and B */ + priv->port = ports[p]; + priv->shadow = shads[p]; +@@ -476,6 +511,12 @@ + + filp->private_data = (void *)priv; + ++ /* link it into our alarmlist */ ++ spin_lock_irq(&gpio_lock); ++ priv->next = alarmlist; ++ alarmlist = priv; ++ spin_unlock_irq(&gpio_lock); ++ + return 0; + } + +@@ -485,10 +526,10 @@ + struct gpio_private *p; + struct gpio_private *todel; + +- spin_lock(&gpio_lock); ++ spin_lock_irq(&gpio_lock); + +- p = alarmlist; +- todel = (struct gpio_private *)filp->private_data; ++ p = alarmlist; ++ todel = (struct gpio_private *)filp->private_data; + + /* unlink from alarmlist and free the private structure */ + +@@ -506,12 +547,13 @@ + while (p) { + if (p->highalarm | p->lowalarm) { + gpio_some_alarms = 1; ++ spin_unlock_irq(&gpio_lock); + return 0; + } + p = p->next; + } + gpio_some_alarms = 0; +- spin_unlock(&gpio_lock); ++ spin_unlock_irq(&gpio_lock); + return 0; + } + +@@ -691,6 +733,8 @@ + /* Must update gpio_some_alarms */ + struct gpio_private *p = alarmlist; + int some_alarms; ++ spin_lock_irq(&gpio_lock); ++ p = alarmlist; + some_alarms = 0; + while (p) { + if (p->highalarm | p->lowalarm) { +@@ -700,6 +744,7 @@ + p = p->next; + } + gpio_some_alarms = some_alarms; ++ spin_unlock_irq(&gpio_lock); + } + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ +@@ -937,11 +982,11 @@ + * in some tests. + */ + if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt, +- IRQF_SHARED | IRQF_DISABLED,"gpio poll", NULL)) { ++ IRQF_SHARED | IRQF_DISABLED,"gpio poll", gpio_name)) { + printk(KERN_CRIT "err: timer0 irq for gpio\n"); + } + if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt, +- IRQF_SHARED | IRQF_DISABLED,"gpio PA", NULL)) { ++ IRQF_SHARED | IRQF_DISABLED,"gpio PA", gpio_name)) { + printk(KERN_CRIT "err: PA irq for gpio\n"); + } + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/i2c.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/i2c.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/i2c.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/i2c.c 2006-10-13 14:43:10.000000000 +0200 +@@ -11,7 +11,25 @@ + *! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - + *! don't use PB_I2C if DS1302 uses same bits, + *! use PB. ++*! June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now ++*! generates nack on last received byte, ++*! instead of ack. ++*! i2c_getack changed data level while clock ++*! was high, causing DS75 to see a stop condition ++*! + *! $Log: i2c.c,v $ ++*! Revision 1.17 2006/10/13 12:43:10 starvik ++*! Merge of 2.6.18 ++*! ++*! Revision 1.16 2005/09/29 13:33:35 bjarne ++*! If "first" should have any purpos it should probably change value.... ++*! ++*! Revision 1.15 2005/08/29 07:32:16 starvik ++*! Merge of 2.6.13 ++*! ++*! Revision 1.14 2005/06/30 18:07:31 starvik ++*! Added the sendnack patch from 2.4. ++*! + *! Revision 1.13 2005/03/07 13:13:07 starvik + *! Added spinlocks to protect states etc + *! +@@ -84,7 +102,7 @@ + *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN + *! + *!***************************************************************************/ +-/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */ ++/* $Id: i2c.c,v 1.17 2006/10/13 12:43:10 starvik Exp $ */ + + /****************** INCLUDE FILES SECTION ***********************************/ + +@@ -480,7 +498,7 @@ + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); +- ++ + i2c_dir_in(); + } + +@@ -622,7 +640,7 @@ + * last received byte needs to be nacked + * instead of acked + */ +- i2c_sendack(); ++ i2c_sendnack(); + /* + * end sequence + */ +@@ -708,6 +726,7 @@ + if (!first) { + return res; + } ++ first = 0; + + /* Setup and enable the Port B I2C interface */ + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/pcf8563.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/pcf8563.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/pcf8563.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/pcf8563.c 2006-10-27 17:22:12.000000000 +0200 +@@ -8,14 +8,13 @@ + * low detector are also provided. All address and data are transferred + * serially via two-line bidirectional I2C-bus. Maximum bus speed is + * 400 kbits/s. The built-in word address register is incremented +- * automatically after each written or read bute. ++ * automatically after each written or read byte. + * +- * Copyright (c) 2002, Axis Communications AB ++ * Copyright (c) 2002-2006, Axis Communications AB + * All rights reserved. + * + * Author: Tobias Anderberg <tobiasa@axis.com>. + * +- * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $ + */ + + #include <linux/module.h> +@@ -27,93 +26,105 @@ + #include <linux/ioctl.h> + #include <linux/delay.h> + #include <linux/bcd.h> +-#include <linux/capability.h> + + #include <asm/uaccess.h> + #include <asm/system.h> + #include <asm/io.h> +-#include <asm/arch/svinto.h> + #include <asm/rtc.h> ++ + #include "i2c.h" + +-#define PCF8563_MAJOR 121 /* Local major number. */ +-#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ +-#define PCF8563_NAME "PCF8563" +-#define DRIVER_VERSION "$Revision: 1.11 $" +- +-/* I2C bus slave registers. */ +-#define RTC_I2C_READ 0xa3 +-#define RTC_I2C_WRITE 0xa2 ++#define PCF8563_MAJOR 121 /* Local major number. */ ++#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ ++#define PCF8563_NAME "PCF8563" ++#define DRIVER_VERSION "$Revision: 1.18 $" + + /* Two simple wrapper macros, saves a few keystrokes. */ + #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) + #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) + + static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */ +- ++ + static const unsigned char days_in_month[] = + { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + + int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); + ++/* Cache VL bit value read at driver init since writing the RTC_SECOND ++ * register clears the VL status. ++ */ ++static int voltage_low = 0; ++ + static struct file_operations pcf8563_fops = { +- .owner = THIS_MODULE, +- .ioctl = pcf8563_ioctl, ++ owner: THIS_MODULE, ++ ioctl: pcf8563_ioctl, + }; + + unsigned char +-pcf8563_readreg(int reg) ++pcf8563_readreg(int reg) + { +- unsigned char res = i2c_readreg(RTC_I2C_READ, reg); ++ unsigned char res = rtc_read(reg); + +- /* The PCF8563 does not return 0 for unimplemented bits */ +- switch(reg) +- { ++ /* The PCF8563 does not return 0 for unimplemented bits. */ ++ switch (reg) { + case RTC_SECONDS: + case RTC_MINUTES: +- res &= 0x7f; +- break; ++ res &= 0x7F; ++ break; + case RTC_HOURS: + case RTC_DAY_OF_MONTH: +- res &= 0x3f; +- break; ++ res &= 0x3F; ++ break; ++ case RTC_WEEKDAY: ++ res &= 0x07; ++ break; + case RTC_MONTH: +- res = (res & 0x1f) - 1; /* PCF8563 returns month in range 1-12 */ +- break; ++ res &= 0x1F; ++ break; ++ case RTC_CONTROL1: ++ res &= 0xA8; ++ break; ++ case RTC_CONTROL2: ++ res &= 0x1F; ++ break; ++ case RTC_CLOCKOUT_FREQ: ++ case RTC_TIMER_CONTROL: ++ res &= 0x83; ++ break; + } + return res; + } + + void +-pcf8563_writereg(int reg, unsigned char val) ++pcf8563_writereg(int reg, unsigned char val) + { +-#ifdef CONFIG_ETRAX_RTC_READONLY +- if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) +- return; +-#endif +- + rtc_write(reg, val); + } + + void + get_rtc_time(struct rtc_time *tm) + { +- tm->tm_sec = rtc_read(RTC_SECONDS); +- tm->tm_min = rtc_read(RTC_MINUTES); ++ tm->tm_sec = rtc_read(RTC_SECONDS); ++ tm->tm_min = rtc_read(RTC_MINUTES); + tm->tm_hour = rtc_read(RTC_HOURS); + tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH); +- tm->tm_mon = rtc_read(RTC_MONTH); ++ tm->tm_wday = rtc_read(RTC_WEEKDAY); ++ tm->tm_mon = rtc_read(RTC_MONTH); + tm->tm_year = rtc_read(RTC_YEAR); + +- if (tm->tm_sec & 0x80) +- printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME); ++ if (tm->tm_sec & 0x80) { ++ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " ++ "information is no longer guaranteed!\n", PCF8563_NAME); ++ } + +- tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); +- tm->tm_sec &= 0x7f; +- tm->tm_min &= 0x7f; +- tm->tm_hour &= 0x3f; +- tm->tm_mday &= 0x3f; +- tm->tm_mon &= 0x1f; ++ tm->tm_year = BCD_TO_BIN(tm->tm_year) + ++ ((tm->tm_mon & 0x80) ? 100 : 0); ++ tm->tm_sec &= 0x7F; ++ tm->tm_min &= 0x7F; ++ tm->tm_hour &= 0x3F; ++ tm->tm_mday &= 0x3F; ++ tm->tm_wday &= 0x07; /* Not coded in BCD. */ ++ tm->tm_mon &= 0x1F; + + BCD_TO_BIN(tm->tm_sec); + BCD_TO_BIN(tm->tm_min); +@@ -126,17 +137,25 @@ + int __init + pcf8563_init(void) + { +- int ret; ++ static int res = 0; ++ static int first = 1; ++ ++ if (!first) { ++ return res; ++ } ++ first = 0; + +- if ((ret = i2c_init())) { +- printk(KERN_CRIT "pcf8563_init: failed to init i2c\n"); +- return ret; ++ /* Initiate the i2c protocol. */ ++ res = i2c_init(); ++ if (res < 0) { ++ printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); ++ return res; + } + + /* + * First of all we need to reset the chip. This is done by +- * clearing control1, control2 and clk freq, clear the +- * Voltage Low bit, and resetting all alarms. ++ * clearing control1, control2 and clk freq and resetting ++ * all alarms. + */ + if (rtc_write(RTC_CONTROL1, 0x00) < 0) + goto err; +@@ -147,41 +166,44 @@ + if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0) + goto err; + +- /* Clear the VL bit in the seconds register. */ +- ret = rtc_read(RTC_SECONDS); +- +- if (rtc_write(RTC_SECONDS, (ret & 0x7f)) < 0) ++ if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0) + goto err; +- ++ + /* Reset the alarms. */ +- if (rtc_write(RTC_MINUTE_ALARM, 0x00) < 0) ++ if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0) + goto err; +- +- if (rtc_write(RTC_HOUR_ALARM, 0x00) < 0) ++ ++ if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0) + goto err; +- +- if (rtc_write(RTC_DAY_ALARM, 0x00) < 0) ++ ++ if (rtc_write(RTC_DAY_ALARM, 0x80) < 0) + goto err; +- +- if (rtc_write(RTC_WEEKDAY_ALARM, 0x00) < 0) ++ ++ if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) + goto err; +- +- /* Check for low voltage, and warn about it.. */ +- if (rtc_read(RTC_SECONDS) & 0x80) +- printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME); +- +- return 0; ++ ++ /* Check for low voltage, and warn about it. */ ++ if (rtc_read(RTC_SECONDS) & 0x80) { ++ voltage_low = 1; ++ printk(KERN_WARNING "%s: RTC Voltage Low - reliable " ++ "date/time information is no longer guaranteed!\n", ++ PCF8563_NAME); ++ } ++ ++ return res; + + err: + printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); +- return -1; ++ res = -1; ++ return res; + } + + void __exit + pcf8563_exit(void) + { + if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) { +- printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME); ++ printk(KERN_INFO "%s: Unable to unregister device.\n", ++ PCF8563_NAME); + } + } + +@@ -190,7 +212,8 @@ + * POSIX says so! + */ + int +-pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) ++pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, ++ unsigned long arg) + { + /* Some sanity checks. */ + if (_IOC_TYPE(cmd) != RTC_MAGIC) +@@ -201,123 +224,151 @@ + + switch (cmd) { + case RTC_RD_TIME: +- { +- struct rtc_time tm; +- +- spin_lock(&rtc_lock); +- get_rtc_time(&tm); ++ { ++ struct rtc_time tm; + +- if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) { +- spin_unlock(&rtc_lock); +- return -EFAULT; +- } ++ spin_lock(&rtc_lock); ++ memset(&tm, 0, sizeof tm); ++ get_rtc_time(&tm); + ++ if (copy_to_user((struct rtc_time *) arg, &tm, ++ sizeof tm)) { + spin_unlock(&rtc_lock); +- return 0; ++ return -EFAULT; + } +- break; ++ ++ spin_unlock(&rtc_lock); ++ ++ return 0; ++ } + case RTC_SET_TIME: +- { +-#ifdef CONFIG_ETRAX_RTC_READONLY ++ { ++ int leap; ++ int year; ++ int century; ++ struct rtc_time tm; ++ ++ memset(&tm, 0, sizeof tm); ++ if (!capable(CAP_SYS_TIME)) + return -EPERM; +-#else +- int leap; +- int century; +- struct rtc_time tm; +- +- memset(&tm, 0, sizeof (struct rtc_time)); +- if (!capable(CAP_SYS_TIME)) +- return -EPERM; +- +- if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time))) +- return -EFAULT; +- +- /* Convert from struct tm to struct rtc_time. */ +- tm.tm_year += 1900; +- tm.tm_mon += 1; +- +- leap = ((tm.tm_mon == 2) && ((tm.tm_year % 4) == 0)) ? 1 : 0; +- +- /* Perform some sanity checks. */ +- if ((tm.tm_year < 1970) || +- (tm.tm_mon > 12) || +- (tm.tm_mday == 0) || +- (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || +- (tm.tm_hour >= 24) || +- (tm.tm_min >= 60) || +- (tm.tm_sec >= 60)) +- return -EINVAL; +- +- century = (tm.tm_year >= 2000) ? 0x80 : 0; +- tm.tm_year = tm.tm_year % 100; +- +- BIN_TO_BCD(tm.tm_year); +- BIN_TO_BCD(tm.tm_mday); +- BIN_TO_BCD(tm.tm_hour); +- BIN_TO_BCD(tm.tm_min); +- BIN_TO_BCD(tm.tm_sec); +- tm.tm_mon |= century; +- +- spin_lock(&rtc_lock); +- +- rtc_write(RTC_YEAR, tm.tm_year); +- rtc_write(RTC_MONTH, tm.tm_mon); +- rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); +- rtc_write(RTC_HOURS, tm.tm_hour); +- rtc_write(RTC_MINUTES, tm.tm_min); +- rtc_write(RTC_SECONDS, tm.tm_sec); + +- spin_unlock(&rtc_lock); ++ if (copy_from_user(&tm, (struct rtc_time *) arg, ++ sizeof tm)) { ++ return -EFAULT; ++ } + +- return 0; +-#endif /* !CONFIG_ETRAX_RTC_READONLY */ ++ /* Convert from struct tm to struct rtc_time. */ ++ tm.tm_year += 1900; ++ tm.tm_mon += 1; ++ ++ /* ++ * Check if tm.tm_year is a leap year. A year is a leap ++ * year if it is divisible by 4 but not 100, except ++ * that years divisible by 400 _are_ leap years. ++ */ ++ year = tm.tm_year; ++ leap = (tm.tm_mon == 2) && ++ ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); ++ ++ /* Perform some sanity checks. */ ++ if ((tm.tm_year < 1970) || ++ (tm.tm_mon > 12) || ++ (tm.tm_mday == 0) || ++ (tm.tm_mday > days_in_month[tm.tm_mon] + leap) || ++ (tm.tm_wday >= 7) || ++ (tm.tm_hour >= 24) || ++ (tm.tm_min >= 60) || ++ (tm.tm_sec >= 60)) { ++ return -EINVAL; + } + +- case RTC_VLOW_RD: +- { +- int vl_bit = 0; ++ century = (tm.tm_year >= 2000) ? 0x80 : 0; ++ tm.tm_year = tm.tm_year % 100; + +- if (rtc_read(RTC_SECONDS) & 0x80) { +- vl_bit = 1; +- printk(KERN_WARNING "%s: RTC Voltage Low - reliable " +- "date/time information is no longer guaranteed!\n", +- PCF8563_NAME); +- } +- if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) +- return -EFAULT; ++ BIN_TO_BCD(tm.tm_year); ++ BIN_TO_BCD(tm.tm_mon); ++ BIN_TO_BCD(tm.tm_mday); ++ BIN_TO_BCD(tm.tm_hour); ++ BIN_TO_BCD(tm.tm_min); ++ BIN_TO_BCD(tm.tm_sec); ++ tm.tm_mon |= century; ++ ++ spin_lock(&rtc_lock); ++ ++ rtc_write(RTC_YEAR, tm.tm_year); ++ rtc_write(RTC_MONTH, tm.tm_mon); ++ rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ ++ rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday); ++ rtc_write(RTC_HOURS, tm.tm_hour); ++ rtc_write(RTC_MINUTES, tm.tm_min); ++ rtc_write(RTC_SECONDS, tm.tm_sec); ++ ++ spin_unlock(&rtc_lock); + + return 0; + } ++ case RTC_VLOW_RD: ++ if (voltage_low) { ++ printk(KERN_WARNING "%s: RTC Voltage Low - " ++ "reliable date/time information is no " ++ "longer guaranteed!\n", PCF8563_NAME); ++ } ++ ++ if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) { ++ return -EFAULT; ++ } ++ ++ return 0; + + case RTC_VLOW_SET: + { +- /* Clear the VL bit in the seconds register */ ++ /* Clear the VL bit in the seconds register in case ++ * the time has not been set already (which would ++ * have cleared it). This does not really matter ++ * because of the cached voltage_low value but do it ++ * anyway for consistency. */ ++ + int ret = rtc_read(RTC_SECONDS); + + rtc_write(RTC_SECONDS, (ret & 0x7F)); + ++ /* Clear the cached value. */ ++ voltage_low = 0; ++ + return 0; + } +- + default: +- return -ENOTTY; ++ return -ENOTTY; + } + + return 0; + } + +-static int __init ++static int __init + pcf8563_register(void) + { +- pcf8563_init(); ++ if (pcf8563_init() < 0) { ++ printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " ++ "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); ++ return -1; ++ } ++ + if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { +- printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", +- PCF8563_NAME, PCF8563_MAJOR); ++ printk(KERN_INFO "%s: Unable to get major numer %d for RTC " ++ "device.\n", PCF8563_NAME, PCF8563_MAJOR); + return -1; + } + +- printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); +- return 0; ++ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, ++ DRIVER_VERSION); ++ ++ /* Check for low voltage, and warn about it. */ ++ if (voltage_low) { ++ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " ++ "information is no longer guaranteed!\n", PCF8563_NAME); ++ } ++ ++ return 0; + } + + module_init(pcf8563_register); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/sync_serial.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/sync_serial.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/sync_serial.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/sync_serial.c 2007-02-05 12:56:34.000000000 +0100 +@@ -0,0 +1,1329 @@ ++/* ++ * Simple synchronous serial port driver for ETRAX 100LX. ++ * ++ * Synchronous serial ports are used for continuous streamed data like audio. ++ * The default setting for this driver is compatible with the STA 013 MP3 ++ * decoder. The driver can easily be tuned to fit other audio encoder/decoders ++ * and SPI ++ * ++ * Copyright (c) 2001-2006 Axis Communications AB ++ * ++ * Author: Mikael Starvik, Johan Adolfsson ++ * ++ */ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/major.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/poll.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <asm/irq.h> ++#include <asm/dma.h> ++#include <asm/io.h> ++#include <asm/arch/svinto.h> ++#include <asm/uaccess.h> ++#include <asm/system.h> ++#include <asm/sync_serial.h> ++#include <asm/arch/io_interface_mux.h> ++ ++/* The receiver is a bit tricky beacuse of the continuous stream of data.*/ ++/* */ ++/* Three DMA descriptors are linked together. Each DMA descriptor is */ ++/* responsible for port->bufchunk of a common buffer. */ ++/* */ ++/* +---------------------------------------------+ */ ++/* | +----------+ +----------+ +----------+ | */ ++/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */ ++/* +----------+ +----------+ +----------+ */ ++/* | | | */ ++/* v v v */ ++/* +-------------------------------------+ */ ++/* | BUFFER | */ ++/* +-------------------------------------+ */ ++/* |<- data_avail ->| */ ++/* readp writep */ ++/* */ ++/* If the application keeps up the pace readp will be right after writep.*/ ++/* If the application can't keep the pace we have to throw away data. */ ++/* The idea is that readp should be ready with the data pointed out by */ ++/* Descr[i] when the DMA has filled in Descr[i+1]. */ ++/* Otherwise we will discard */ ++/* the rest of the data pointed out by Descr1 and set readp to the start */ ++/* of Descr2 */ ++ ++#define SYNC_SERIAL_MAJOR 125 ++ ++/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */ ++/* words can be handled */ ++#define IN_BUFFER_SIZE 12288 ++#define IN_DESCR_SIZE 256 ++#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) ++#define OUT_BUFFER_SIZE 4096 ++ ++#define DEFAULT_FRAME_RATE 0 ++#define DEFAULT_WORD_RATE 7 ++ ++/* NOTE: Enabling some debug will likely cause overrun or underrun, ++ * especially if manual mode is use. ++ */ ++#define DEBUG(x) ++#define DEBUGREAD(x) ++#define DEBUGWRITE(x) ++#define DEBUGPOLL(x) ++#define DEBUGRXINT(x) ++#define DEBUGTXINT(x) ++ ++/* Define some macros to access ETRAX 100 registers */ ++#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ ++ IO_FIELD_(reg##_, field##_, val) ++#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \ ++ IO_STATE_(reg##_, field##_, _##val) ++ ++typedef struct sync_port ++{ ++ /* Etrax registers and bits*/ ++ const volatile unsigned * const status; ++ volatile unsigned * const ctrl_data; ++ volatile unsigned * const output_dma_first; ++ volatile unsigned char * const output_dma_cmd; ++ volatile unsigned char * const output_dma_clr_irq; ++ volatile unsigned * const input_dma_first; ++ volatile unsigned char * const input_dma_cmd; ++ volatile unsigned * const input_dma_descr; ++ /* 8*4 */ ++ volatile unsigned char * const input_dma_clr_irq; ++ volatile unsigned * const data_out; ++ const volatile unsigned * const data_in; ++ char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ ++ char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */ ++ char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */ ++ ++ char output_dma_bit; /* In R_IRQ_MASK2_RD */ ++ /* End of fields initialised in array */ ++ char started; /* 1 if port has been started */ ++ char port_nbr; /* Port 0 or 1 */ ++ char busy; /* 1 if port is busy */ ++ ++ char enabled; /* 1 if port is enabled */ ++ char use_dma; /* 1 if port uses dma */ ++ char tr_running; ++ ++ char init_irqs; ++ ++ unsigned int ctrl_data_shadow; /* Register shadow */ ++ volatile unsigned int out_count; /* Remaining bytes for current transfer */ ++ unsigned char* outp; /* Current position in out_buffer */ ++ /* 16*4 */ ++ volatile unsigned char* volatile readp; /* Next byte to be read by application */ ++ volatile unsigned char* volatile writep; /* Next byte to be written by etrax */ ++ unsigned int in_buffer_size; ++ unsigned int inbufchunk; ++ struct etrax_dma_descr out_descr __attribute__ ((aligned(32))); ++ struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32))); ++ unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32))); ++ unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32))); ++ unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32))); ++ struct etrax_dma_descr* next_rx_desc; ++ struct etrax_dma_descr* prev_rx_desc; ++ int full; ++ ++ wait_queue_head_t out_wait_q; ++ wait_queue_head_t in_wait_q; ++} sync_port; ++ ++ ++static int etrax_sync_serial_init(void); ++static void initialize_port(int portnbr); ++static inline int sync_data_avail(struct sync_port *port); ++ ++static int sync_serial_open(struct inode *, struct file*); ++static int sync_serial_release(struct inode*, struct file*); ++static unsigned int sync_serial_poll(struct file *filp, poll_table *wait); ++ ++static int sync_serial_ioctl(struct inode*, struct file*, ++ unsigned int cmd, unsigned long arg); ++static ssize_t sync_serial_write(struct file * file, const char * buf, ++ size_t count, loff_t *ppos); ++static ssize_t sync_serial_read(struct file *file, char *buf, ++ size_t count, loff_t *ppos); ++ ++#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ ++ defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ ++ (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ ++ defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) ++#define SYNC_SER_DMA ++#endif ++ ++static void send_word(sync_port* port); ++static void start_dma(struct sync_port *port, const char* data, int count); ++static void start_dma_in(sync_port* port); ++#ifdef SYNC_SER_DMA ++static irqreturn_t tr_interrupt(int irq, void *dev_id); ++static irqreturn_t rx_interrupt(int irq, void *dev_id); ++#endif ++#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ ++ !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \ ++ (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \ ++ !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)) ++#define SYNC_SER_MANUAL ++#endif ++#ifdef SYNC_SER_MANUAL ++static irqreturn_t manual_interrupt(int irq, void *dev_id); ++#endif ++ ++/* The ports */ ++static struct sync_port ports[]= ++{ ++ { ++ .status = R_SYNC_SERIAL1_STATUS, ++ .ctrl_data = R_SYNC_SERIAL1_CTRL, ++ .output_dma_first = R_DMA_CH8_FIRST, ++ .output_dma_cmd = R_DMA_CH8_CMD, ++ .output_dma_clr_irq = R_DMA_CH8_CLR_INTR, ++ .input_dma_first = R_DMA_CH9_FIRST, ++ .input_dma_cmd = R_DMA_CH9_CMD, ++ .input_dma_descr = R_DMA_CH9_DESCR, ++ .input_dma_clr_irq = R_DMA_CH9_CLR_INTR, ++ .data_out = R_SYNC_SERIAL1_TR_DATA, ++ .data_in = R_SYNC_SERIAL1_REC_DATA, ++ .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data), ++ .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready), ++ .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr), ++ .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop), ++ .init_irqs = 1, ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) ++ .use_dma = 1, ++#else ++ .use_dma = 0, ++#endif ++ }, ++ { ++ .status = R_SYNC_SERIAL3_STATUS, ++ .ctrl_data = R_SYNC_SERIAL3_CTRL, ++ .output_dma_first = R_DMA_CH4_FIRST, ++ .output_dma_cmd = R_DMA_CH4_CMD, ++ .output_dma_clr_irq = R_DMA_CH4_CLR_INTR, ++ .input_dma_first = R_DMA_CH5_FIRST, ++ .input_dma_cmd = R_DMA_CH5_CMD, ++ .input_dma_descr = R_DMA_CH5_DESCR, ++ .input_dma_clr_irq = R_DMA_CH5_CLR_INTR, ++ .data_out = R_SYNC_SERIAL3_TR_DATA, ++ .data_in = R_SYNC_SERIAL3_REC_DATA, ++ .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data), ++ .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready), ++ .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr), ++ .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop), ++ .init_irqs = 1, ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) ++ .use_dma = 1, ++#else ++ .use_dma = 0, ++#endif ++ } ++}; ++ ++/* Register shadows */ ++static unsigned sync_serial_prescale_shadow = 0; ++ ++#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port)) ++ ++static struct file_operations sync_serial_fops = { ++ .owner = THIS_MODULE, ++ .write = sync_serial_write, ++ .read = sync_serial_read, ++ .poll = sync_serial_poll, ++ .ioctl = sync_serial_ioctl, ++ .open = sync_serial_open, ++ .release = sync_serial_release ++}; ++ ++static int __init etrax_sync_serial_init(void) ++{ ++ ports[0].enabled = 0; ++ ports[1].enabled = 0; ++ ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) ++ if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) { ++ printk(KERN_CRIT "ETRAX100LX sync_serial: Could not allocate IO group for port %d\n", 0); ++ return -EBUSY; ++ } ++#endif ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) ++ if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) { ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) ++ cris_free_io_interface(if_sync_serial_1); ++#endif ++ printk(KERN_CRIT "ETRAX100LX sync_serial: Could not allocate IO group for port %d\n", 1); ++ return -EBUSY; ++ } ++#endif ++ ++ if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) ++ { ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) ++ cris_free_io_interface(if_sync_serial_3); ++#endif ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) ++ cris_free_io_interface(if_sync_serial_1); ++#endif ++ printk("unable to get major for synchronous serial port\n"); ++ return -EBUSY; ++ } ++ ++ /* Deselect synchronous serial ports while configuring. */ ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); ++ *R_GEN_CONFIG_II = gen_config_ii_shadow; ++ ++ /* Initialize Ports */ ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) ++ ports[0].enabled = 1; ++ SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra); ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA) ++ ports[0].use_dma = 1; ++#else ++ ports[0].use_dma = 0; ++#endif ++ initialize_port(0); ++#endif ++ ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) ++ ports[1].enabled = 1; ++ SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra); ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); ++#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA) ++ ports[1].use_dma = 1; ++#else ++ ports[1].use_dma = 0; ++#endif ++ initialize_port(1); ++#endif ++ ++ *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */ ++ ++ /* Set up timing */ ++ *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = ( ++ IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) | ++ IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) | ++ IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) | ++ IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) | ++ IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) | ++ IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate, DEFAULT_FRAME_RATE) | ++ IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) | ++ IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal)); ++ ++ /* Select synchronous ports */ ++ *R_GEN_CONFIG_II = gen_config_ii_shadow; ++ ++ printk("ETRAX 100LX synchronous serial port driver\n"); ++ return 0; ++} ++ ++static void __init initialize_port(int portnbr) ++{ ++ struct sync_port* port = &ports[portnbr]; ++ ++ DEBUG(printk("Init sync serial port %d\n", portnbr)); ++ ++ port->started = 0; ++ port->port_nbr = portnbr; ++ port->busy = 0; ++ port->tr_running = 0; ++ ++ port->out_count = 0; ++ port->outp = port->out_buffer; ++ ++ port->readp = port->flip; ++ port->writep = port->flip; ++ port->in_buffer_size = IN_BUFFER_SIZE; ++ port->inbufchunk = IN_DESCR_SIZE; ++ port->next_rx_desc = &port->in_descr[0]; ++ port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1]; ++ port->prev_rx_desc->ctrl = d_eol; ++ ++ init_waitqueue_head(&port->out_wait_q); ++ init_waitqueue_head(&port->in_wait_q); ++ ++ port->ctrl_data_shadow = ++ IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)| ++ IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)| ++ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) | ++ IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)| ++ IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high); ++ ++ if (port->use_dma) ++ port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, dma_enable, on); ++ else ++ port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, dma_enable, off); ++ ++ *port->ctrl_data = port->ctrl_data_shadow; ++} ++ ++static inline int sync_data_avail(struct sync_port *port) ++{ ++ int avail; ++ unsigned char *start; ++ unsigned char *end; ++ ++ start = (unsigned char*)port->readp; /* cast away volatile */ ++ end = (unsigned char*)port->writep; /* cast away volatile */ ++ /* 0123456789 0123456789 ++ * ----- - ----- ++ * ^rp ^wp ^wp ^rp ++ */ ++ ++ if (end >= start) ++ avail = end - start; ++ else ++ avail = port->in_buffer_size - (start - end); ++ return avail; ++} ++ ++static inline int sync_data_avail_to_end(struct sync_port *port) ++{ ++ int avail; ++ unsigned char *start; ++ unsigned char *end; ++ ++ start = (unsigned char*)port->readp; /* cast away volatile */ ++ end = (unsigned char*)port->writep; /* cast away volatile */ ++ /* 0123456789 0123456789 ++ * ----- ----- ++ * ^rp ^wp ^wp ^rp ++ */ ++ ++ if (end >= start) ++ avail = end - start; ++ else ++ avail = port->flip + port->in_buffer_size - start; ++ return avail; ++} ++ ++ ++static int sync_serial_open(struct inode *inode, struct file *file) ++{ ++ int dev = MINOR(inode->i_rdev); ++ sync_port* port; ++ int mode; ++ ++ DEBUG(printk("Open sync serial port %d\n", dev)); ++ ++ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) ++ { ++ DEBUG(printk("Invalid minor %d\n", dev)); ++ return -ENODEV; ++ } ++ port = &ports[dev]; ++ /* Allow open this device twice (assuming one reader and one writer) */ ++ if (port->busy == 2) ++ { ++ DEBUG(printk("Device is busy.. \n")); ++ return -EBUSY; ++ } ++ if (port->init_irqs) { ++ if (port->use_dma) { ++ if (port == &ports[0]){ ++#ifdef SYNC_SER_DMA ++ if(request_irq(24, ++ tr_interrupt, ++ 0, ++ "synchronous serial 1 dma tr", ++ &ports[0])) { ++ printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); ++ return -EBUSY; ++ } else if(request_irq(25, ++ rx_interrupt, ++ 0, ++ "synchronous serial 1 dma rx", ++ &ports[0])) { ++ free_irq(24, &port[0]); ++ printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ"); ++ return -EBUSY; ++ } else if (cris_request_dma(8, ++ "synchronous serial 1 dma tr", ++ DMA_VERBOSE_ON_ERROR, ++ dma_ser1)) { ++ free_irq(24, &port[0]); ++ free_irq(25, &port[0]); ++ printk(KERN_CRIT "Can't allocate sync serial port 1 TX DMA channel"); ++ return -EBUSY; ++ } else if (cris_request_dma(9, ++ "synchronous serial 1 dma rec", ++ DMA_VERBOSE_ON_ERROR, ++ dma_ser1)) { ++ cris_free_dma(8, NULL); ++ free_irq(24, &port[0]); ++ free_irq(25, &port[0]); ++ printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel"); ++ return -EBUSY; ++ } ++#endif ++ RESET_DMA(8); WAIT_DMA(8); ++ RESET_DMA(9); WAIT_DMA(9); ++ *R_DMA_CH8_CLR_INTR = IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); ++ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr, do); ++ *R_IRQ_MASK2_SET = ++ IO_STATE(R_IRQ_MASK2_SET, dma8_eop, set) | ++ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); ++ } ++ else if (port == &ports[1]){ ++#ifdef SYNC_SER_DMA ++ if (request_irq(20, ++ tr_interrupt, ++ 0, ++ "synchronous serial 3 dma tr", ++ &ports[1])) { ++ printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); ++ return -EBUSY; ++ } else if (request_irq(21, ++ rx_interrupt, ++ 0, ++ "synchronous serial 3 dma rx", ++ &ports[1])) { ++ free_irq(20, &ports[1]); ++ printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ"); ++ return -EBUSY; ++ } else if (cris_request_dma(4, ++ "synchronous serial 3 dma tr", ++ DMA_VERBOSE_ON_ERROR, ++ dma_ser3)) { ++ free_irq(21, &ports[1]); ++ free_irq(20, &ports[1]); ++ printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); ++ return -EBUSY; ++ } else if (cris_request_dma(5, ++ "synchronous serial 3 dma rec", ++ DMA_VERBOSE_ON_ERROR, ++ dma_ser3)) { ++ cris_free_dma(4, NULL); ++ free_irq(21, &ports[1]); ++ free_irq(20, &ports[1]); ++ printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel"); ++ return -EBUSY; ++ } ++#endif ++ RESET_DMA(4); WAIT_DMA(4); ++ RESET_DMA(5); WAIT_DMA(5); ++ *R_DMA_CH4_CLR_INTR = IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); ++ *R_DMA_CH5_CLR_INTR = IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr, do); ++ *R_IRQ_MASK2_SET = ++ IO_STATE(R_IRQ_MASK2_SET, dma4_eop, set) | ++ IO_STATE(R_IRQ_MASK2_SET, dma5_descr, set); ++ } ++ start_dma_in(port); ++ port->init_irqs = 0; ++ } else { /* !port->use_dma */ ++#ifdef SYNC_SER_MANUAL ++ if (port == &ports[0]) { ++ if (request_irq(8, ++ manual_interrupt, ++ IRQF_SHARED | IRQF_DISABLED, ++ "synchronous serial manual irq", ++ &ports[0])) { ++ printk("Can't allocate sync serial manual irq"); ++ return -EBUSY; ++ } ++ } else if (port == &ports[1]) { ++ if (request_irq(8, ++ manual_interrupt, ++ IRQF_SHARED | IRQF_DISABLED, ++ "synchronous serial manual irq", ++ &ports[1])) { ++ printk(KERN_CRIT "Can't allocate sync serial manual irq"); ++ return -EBUSY; ++ } ++ } ++ port->init_irqs = 0; ++#else ++ panic("sync_serial: Manual mode not supported.\n"); ++#endif /* SYNC_SER_MANUAL */ ++ } ++ } /* port->init_irqs */ ++ ++ port->busy++; ++ /* Start port if we use it as input */ ++ mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow); ++ if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) || ++ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) || ++ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) || ++ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) { ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable); ++ port->started = 1; ++ *port->ctrl_data = port->ctrl_data_shadow; ++ if (!port->use_dma) ++ *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; ++ DEBUG(printk("sser%d rec started\n", dev)); ++ } ++ return 0; ++} ++ ++static int sync_serial_release(struct inode *inode, struct file *file) ++{ ++ int dev = MINOR(inode->i_rdev); ++ sync_port* port; ++ ++ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) ++ { ++ DEBUG(printk("Invalid minor %d\n", dev)); ++ return -ENODEV; ++ } ++ port = &ports[dev]; ++ if (port->busy) ++ port->busy--; ++ if (!port->busy) ++ *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) | ++ (1 << port->transmitter_ready_bit)); ++ ++ return 0; ++} ++ ++ ++ ++static unsigned int sync_serial_poll(struct file *file, poll_table *wait) ++{ ++ int dev = MINOR(file->f_dentry->d_inode->i_rdev); ++ unsigned int mask = 0; ++ sync_port* port; ++ DEBUGPOLL( static unsigned int prev_mask = 0; ); ++ ++ port = &ports[dev]; ++ poll_wait(file, &port->out_wait_q, wait); ++ poll_wait(file, &port->in_wait_q, wait); ++ /* Some room to write */ ++ if (port->out_count < OUT_BUFFER_SIZE) ++ mask |= POLLOUT | POLLWRNORM; ++ /* At least an inbufchunk of data */ ++ if (sync_data_avail(port) >= port->inbufchunk) ++ mask |= POLLIN | POLLRDNORM; ++ ++ DEBUGPOLL(if (mask != prev_mask) ++ printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, ++ mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); ++ prev_mask = mask; ++ ); ++ return mask; ++} ++ ++static int sync_serial_ioctl(struct inode *inode, struct file *file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int return_val = 0; ++ unsigned long flags; ++ ++ int dev = MINOR(file->f_dentry->d_inode->i_rdev); ++ sync_port* port; ++ ++ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) ++ { ++ DEBUG(printk("Invalid minor %d\n", dev)); ++ return -1; ++ } ++ port = &ports[dev]; ++ ++ local_irq_save(flags); ++ /* Disable port while changing config */ ++ if (dev) ++ { ++ if (port->use_dma) { ++ RESET_DMA(4); WAIT_DMA(4); ++ port->tr_running = 0; ++ port->out_count = 0; ++ port->outp = port->out_buffer; ++ *R_DMA_CH4_CLR_INTR = IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do); ++ } ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async); ++ } ++ else ++ { ++ if (port->use_dma) { ++ RESET_DMA(8); WAIT_DMA(8); ++ port->tr_running = 0; ++ port->out_count = 0; ++ port->outp = port->out_buffer; ++ *R_DMA_CH8_CLR_INTR = IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do); ++ } ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); ++ } ++ *R_GEN_CONFIG_II = gen_config_ii_shadow; ++ local_irq_restore(flags); ++ ++ switch(cmd) ++ { ++ case SSP_SPEED: ++ if (GET_SPEED(arg) == CODEC) ++ { ++ if (dev) ++ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec); ++ else ++ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec); ++ ++ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, prescaler, GET_FREQ(arg)); ++ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, frame_rate, GET_FRAME_RATE(arg)); ++ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, word_rate, GET_WORD_RATE(arg)); ++ } ++ else ++ { ++ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_baud, GET_SPEED(arg)); ++ if (dev) ++ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u3, baudrate); ++ else ++ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u1, baudrate); ++ } ++ break; ++ case SSP_MODE: ++ if (arg > 5) ++ return -EINVAL; ++ if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT) ++ *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit; ++ else if (!port->use_dma) ++ *R_IRQ_MASK1_SET = 1 << port->data_avail_bit; ++ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg); ++ break; ++ case SSP_FRAME_SYNC: ++ if (arg & NORMAL_SYNC) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, normal); ++ else if (arg & EARLY_SYNC) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, early); ++ ++ if (arg & BIT_SYNC) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, bit); ++ else if (arg & WORD_SYNC) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, word); ++ else if (arg & EXTENDED_SYNC) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, extended); ++ ++ if (arg & SYNC_ON) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); ++ else if (arg & SYNC_OFF) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, off); ++ ++ if (arg & WORD_SIZE_8) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size8bit); ++ else if (arg & WORD_SIZE_12) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size12bit); ++ else if (arg & WORD_SIZE_16) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size16bit); ++ else if (arg & WORD_SIZE_24) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size24bit); ++ else if (arg & WORD_SIZE_32) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size32bit); ++ ++ if (arg & BIT_ORDER_MSB) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, msb); ++ else if (arg & BIT_ORDER_LSB) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, lsb); ++ ++ if (arg & FLOW_CONTROL_ENABLE) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled); ++ else if (arg & FLOW_CONTROL_DISABLE) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, disabled); ++ ++ if (arg & CLOCK_NOT_GATED) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_mode, normal); ++ else if (arg & CLOCK_GATED) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_mode, gated); ++ ++ break; ++ case SSP_IPOLARITY: ++ /* NOTE!! negedge is considered NORMAL */ ++ if (arg & CLOCK_NORMAL) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, neg); ++ else if (arg & CLOCK_INVERT) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, pos); ++ ++ if (arg & FRAME_NORMAL) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, normal); ++ else if (arg & FRAME_INVERT) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, inverted); ++ ++ if (arg & STATUS_NORMAL) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_polarity, normal); ++ else if (arg & STATUS_INVERT) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_polarity, inverted); ++ break; ++ case SSP_OPOLARITY: ++ if (arg & CLOCK_NORMAL) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, normal); ++ else if (arg & CLOCK_INVERT) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, inverted); ++ ++ if (arg & FRAME_NORMAL) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, normal); ++ else if (arg & FRAME_INVERT) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, inverted); ++ ++ if (arg & STATUS_NORMAL) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_driver, normal); ++ else if (arg & STATUS_INVERT) ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_driver, inverted); ++ break; ++ case SSP_SPI: ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, disabled); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, msb); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size8bit); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, word); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, normal); ++ if (arg & SPI_SLAVE) ++ { ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, inverted); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, neg); ++ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, SLAVE_INPUT); ++ } ++ else ++ { ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, inverted); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, inverted); ++ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, MASTER_OUTPUT); ++ } ++ break; ++ case SSP_INBUFCHUNK: ++#if 0 ++ if (arg > port->in_buffer_size/NUM_IN_DESCR) ++ return -EINVAL; ++ port->inbufchunk = arg; ++ /* Make sure in_buffer_size is a multiple of inbufchunk */ ++ port->in_buffer_size = (port->in_buffer_size/port->inbufchunk) * port->inbufchunk; ++ DEBUG(printk("inbufchunk %i in_buffer_size: %i\n", port->inbufchunk, port->in_buffer_size)); ++ if (port->use_dma) { ++ if (port->port_nbr == 0) { ++ RESET_DMA(9); ++ WAIT_DMA(9); ++ } else { ++ RESET_DMA(5); ++ WAIT_DMA(5); ++ } ++ start_dma_in(port); ++ } ++#endif ++ break; ++ default: ++ return_val = -1; ++ } ++ /* Make sure we write the config without interruption */ ++ local_irq_save(flags); ++ /* Set config and enable port */ ++ *port->ctrl_data = port->ctrl_data_shadow; ++ nop(); nop(); nop(); nop(); ++ *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow; ++ nop(); nop(); nop(); nop(); ++ if (dev) ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync); ++ else ++ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync); ++ ++ *R_GEN_CONFIG_II = gen_config_ii_shadow; ++ /* Reset DMA. At readout from serial port the data could be shifted ++ * one byte if not resetting DMA. ++ */ ++ if (port->use_dma) { ++ if (port->port_nbr == 0) { ++ RESET_DMA(9); ++ WAIT_DMA(9); ++ } else { ++ RESET_DMA(5); ++ WAIT_DMA(5); ++ } ++ start_dma_in(port); ++ } ++ local_irq_restore(flags); ++ return return_val; ++} ++ ++ ++static ssize_t sync_serial_write(struct file * file, const char * buf, ++ size_t count, loff_t *ppos) ++{ ++ int dev = MINOR(file->f_dentry->d_inode->i_rdev); ++ DECLARE_WAITQUEUE(wait, current); ++ sync_port *port; ++ unsigned long flags; ++ unsigned long c, c1; ++ unsigned long free_outp; ++ unsigned long outp; ++ unsigned long out_buffer; ++ ++ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) ++ { ++ DEBUG(printk("Invalid minor %d\n", dev)); ++ return -ENODEV; ++ } ++ port = &ports[dev]; ++ ++ DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); ++ /* Space to end of buffer */ ++ /* ++ * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE ++ * outp^ +out_count ++ ^free_outp ++ * out_buffer 45<- c ->0123OUT_BUFFER_SIZE ++ * +out_count outp^ ++ * free_outp ++ * ++ */ ++ ++ /* Read variables that may be updated by interrupts */ ++ local_irq_save(flags); ++ count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE - port->out_count : count; ++ outp = (unsigned long)port->outp; ++ free_outp = outp + port->out_count; ++ local_irq_restore(flags); ++ out_buffer = (unsigned long)port->out_buffer; ++ ++ /* Find out where and how much to write */ ++ if (free_outp >= out_buffer + OUT_BUFFER_SIZE) ++ free_outp -= OUT_BUFFER_SIZE; ++ if (free_outp >= outp) ++ c = out_buffer + OUT_BUFFER_SIZE - free_outp; ++ else ++ c = outp - free_outp; ++ if (c > count) ++ c = count; ++ ++// DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c)); ++ if (copy_from_user((void*)free_outp, buf, c)) ++ return -EFAULT; ++ ++ if (c != count) { ++ buf += c; ++ c1 = count - c; ++ DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1)); ++ if (copy_from_user((void*)out_buffer, buf, c1)) ++ return -EFAULT; ++ } ++ local_irq_save(flags); ++ port->out_count += count; ++ local_irq_restore(flags); ++ ++ /* Make sure transmitter/receiver is running */ ++ if (!port->started) ++ { ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable); ++ port->started = 1; ++ } ++ ++ *port->ctrl_data = port->ctrl_data_shadow; ++ ++ if (file->f_flags & O_NONBLOCK) { ++ local_irq_save(flags); ++ if (!port->tr_running) { ++ if (!port->use_dma) { ++ /* Start sender by writing data */ ++ send_word(port); ++ /* and enable transmitter ready IRQ */ ++ *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; ++ } else { ++ start_dma(port, (unsigned char* volatile )port->outp, c); ++ } ++ } ++ local_irq_restore(flags); ++ DEBUGWRITE(printk("w d%d c %lu NB\n", ++ port->port_nbr, count)); ++ return count; ++ } ++ ++ /* Sleep until all sent */ ++ ++ add_wait_queue(&port->out_wait_q, &wait); ++ set_current_state(TASK_INTERRUPTIBLE); ++ local_irq_save(flags); ++ if (!port->tr_running) { ++ if (!port->use_dma) { ++ /* Start sender by writing data */ ++ send_word(port); ++ /* and enable transmitter ready IRQ */ ++ *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit; ++ } else { ++ start_dma(port, port->outp, c); ++ } ++ } ++ local_irq_restore(flags); ++ schedule(); ++ set_current_state(TASK_RUNNING); ++ remove_wait_queue(&port->out_wait_q, &wait); ++ if (signal_pending(current)) ++ { ++ return -EINTR; ++ } ++ DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count)); ++ return count; ++} ++ ++static ssize_t sync_serial_read(struct file * file, char * buf, ++ size_t count, loff_t *ppos) ++{ ++ int dev = MINOR(file->f_dentry->d_inode->i_rdev); ++ int avail; ++ sync_port *port; ++ unsigned char* start; ++ unsigned char* end; ++ unsigned long flags; ++ ++ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) ++ { ++ DEBUG(printk("Invalid minor %d\n", dev)); ++ return -ENODEV; ++ } ++ port = &ports[dev]; ++ ++ DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size)); ++ ++ if (!port->started) ++ { ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable); ++ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable); ++ port->started = 1; ++ } ++ *port->ctrl_data = port->ctrl_data_shadow; ++ ++ ++ /* Calculate number of available bytes */ ++ /* Save pointers to avoid that they are modified by interrupt */ ++ local_irq_save(flags); ++ start = (unsigned char*)port->readp; /* cast away volatile */ ++ end = (unsigned char*)port->writep; /* cast away volatile */ ++ local_irq_restore(flags); ++ while ((start == end) && !port->full) /* No data */ ++ { ++ if (file->f_flags & O_NONBLOCK) ++ { ++ return -EAGAIN; ++ } ++ ++ interruptible_sleep_on(&port->in_wait_q); ++ if (signal_pending(current)) ++ { ++ return -EINTR; ++ } ++ local_irq_save(flags); ++ start = (unsigned char*)port->readp; /* cast away volatile */ ++ end = (unsigned char*)port->writep; /* cast away volatile */ ++ local_irq_restore(flags); ++ } ++ ++ /* Lazy read, never return wrapped data. */ ++ if (port->full) ++ avail = port->in_buffer_size; ++ else if (end > start) ++ avail = end - start; ++ else ++ avail = port->flip + port->in_buffer_size - start; ++ ++ count = count > avail ? avail : count; ++ if (copy_to_user(buf, start, count)) ++ return -EFAULT; ++ /* Disable interrupts while updating readp */ ++ local_irq_save(flags); ++ port->readp += count; ++ if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ ++ port->readp = port->flip; ++ port->full = 0; ++ local_irq_restore(flags); ++ DEBUGREAD(printk("r %d\n", count)); ++ return count; ++} ++ ++static void send_word(sync_port* port) ++{ ++ switch(IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize, port->ctrl_data_shadow)) ++ { ++ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): ++ port->out_count--; ++ *port->data_out = *port->outp++; ++ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) ++ port->outp = port->out_buffer; ++ break; ++ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): ++ { ++ int data = (*port->outp++) << 8; ++ data |= *port->outp++; ++ port->out_count-=2; ++ *port->data_out = data; ++ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) ++ port->outp = port->out_buffer; ++ } ++ break; ++ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): ++ port->out_count-=2; ++ *port->data_out = *(unsigned short *)port->outp; ++ port->outp+=2; ++ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) ++ port->outp = port->out_buffer; ++ break; ++ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): ++ port->out_count-=3; ++ *port->data_out = *(unsigned int *)port->outp; ++ port->outp+=3; ++ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) ++ port->outp = port->out_buffer; ++ break; ++ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): ++ port->out_count-=4; ++ *port->data_out = *(unsigned int *)port->outp; ++ port->outp+=4; ++ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) ++ port->outp = port->out_buffer; ++ break; ++ } ++} ++ ++ ++static void start_dma(struct sync_port* port, const char* data, int count) ++{ ++ port->tr_running = 1; ++ port->out_descr.hw_len = 0; ++ port->out_descr.next = 0; ++ port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */ ++ port->out_descr.sw_len = count; ++ port->out_descr.buf = virt_to_phys((char*)data); ++ port->out_descr.status = 0; ++ ++ *port->output_dma_first = virt_to_phys(&port->out_descr); ++ *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); ++ DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count)); ++} ++ ++static void start_dma_in(sync_port* port) ++{ ++ int i; ++ unsigned long buf; ++ port->writep = port->flip; ++ ++ if (port->writep > port->flip + port->in_buffer_size) ++ { ++ panic("Offset too large in sync serial driver\n"); ++ return; ++ } ++ buf = virt_to_phys(port->in_buffer); ++ for (i = 0; i < NUM_IN_DESCR; i++) { ++ port->in_descr[i].sw_len = port->inbufchunk; ++ port->in_descr[i].ctrl = d_int; ++ port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]); ++ port->in_descr[i].buf = buf; ++ port->in_descr[i].hw_len = 0; ++ port->in_descr[i].status = 0; ++ port->in_descr[i].fifo_len = 0; ++ buf += port->inbufchunk; ++ prepare_rx_descriptor(&port->in_descr[i]); ++ } ++ /* Link the last descriptor to the first */ ++ port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]); ++ port->in_descr[i-1].ctrl |= d_eol; ++ port->next_rx_desc = &port->in_descr[0]; ++ port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1]; ++ *port->input_dma_first = virt_to_phys(port->next_rx_desc); ++ *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start); ++} ++ ++#ifdef SYNC_SER_DMA ++static irqreturn_t tr_interrupt(int irq, void *dev_id) ++{ ++ unsigned long ireg = *R_IRQ_MASK2_RD; ++ int i; ++ struct etrax_dma_descr *descr; ++ unsigned int sentl; ++ int handled = 0; ++ ++ for (i = 0; i < NUMBER_OF_PORTS; i++) ++ { ++ sync_port *port = &ports[i]; ++ if (!port->enabled || !port->use_dma ) ++ continue; ++ ++ if (ireg & (1 << port->output_dma_bit)) /* IRQ active for the port? */ ++ { ++ handled = 1; ++ ++ /* Clear IRQ */ ++ *port->output_dma_clr_irq = ++ IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) | ++ IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); ++ ++ descr = &port->out_descr; ++ if (!(descr->status & d_stop)) { ++ sentl = descr->sw_len; ++ } else ++ /* otherwise we find the amount of data sent here */ ++ sentl = descr->hw_len; ++ port->out_count -= sentl; ++ port->outp += sentl; ++ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) ++ port->outp = port->out_buffer; ++ if (port->out_count) { ++ int c; ++ c = port->out_buffer + OUT_BUFFER_SIZE - port->outp; ++ if (c > port->out_count) ++ c = port->out_count; ++ DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c)); ++ start_dma(port, port->outp, c); ++ } else { ++ DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); ++ port->tr_running = 0; ++ } ++ wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */ ++ } ++ } ++ return IRQ_RETVAL(handled); ++} /* tr_interrupt */ ++ ++static irqreturn_t rx_interrupt(int irq, void *dev_id) ++{ ++ unsigned long ireg = *R_IRQ_MASK2_RD; ++ int i; ++ int handled = 0; ++ ++ for (i = 0; i < NUMBER_OF_PORTS; i++) ++ { ++ sync_port *port = &ports[i]; ++ ++ if (!port->enabled || !port->use_dma ) ++ continue; ++ ++ if (ireg & (1 << port->input_dma_descr_bit)) /* Descriptor interrupt */ ++ { ++ handled = 1; ++ while (*port->input_dma_descr != virt_to_phys(port->next_rx_desc)) { ++ ++ if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { ++ int first_size = port->flip + port->in_buffer_size - port->writep; ++ memcpy(port->writep, phys_to_virt(port->next_rx_desc->buf), first_size); ++ memcpy(port->flip, phys_to_virt(port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); ++ port->writep = port->flip + port->inbufchunk - first_size; ++ } else { ++ memcpy(port->writep, phys_to_virt(port->next_rx_desc->buf), port->inbufchunk); ++ port->writep += port->inbufchunk; ++ if (port->writep >= port->flip + port->in_buffer_size) ++ port->writep = port->flip; ++ } ++ if (port->writep == port->readp) ++ { ++ port->full = 1; ++ } ++ ++ prepare_rx_descriptor(port->next_rx_desc); ++ port->next_rx_desc->ctrl |= d_eol; ++ port->prev_rx_desc->ctrl &= ~d_eol; ++ port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc); ++ port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); ++ wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */ ++ *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD, cmd, restart); ++ /* DMA has reached end of descriptor */ ++ *port->input_dma_clr_irq = ++ IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do); ++ } ++ } ++ } ++ ++ return IRQ_RETVAL(handled); ++} /* rx_interrupt */ ++#endif /* SYNC_SER_DMA */ ++ ++#ifdef SYNC_SER_MANUAL ++static irqreturn_t manual_interrupt(int irq, void *dev_id) ++{ ++ int i; ++ int handled = 0; ++ ++ for (i = 0; i < NUMBER_OF_PORTS; i++) ++ { ++ sync_port* port = &ports[i]; ++ ++ if (!port->enabled || port->use_dma) ++ { ++ continue; ++ } ++ ++ if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) /* Data received? */ ++ { ++ handled = 1; ++ /* Read data */ ++ switch(port->ctrl_data_shadow & IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize)) ++ { ++ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit): ++ *port->writep++ = *(volatile char *)port->data_in; ++ break; ++ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit): ++ { ++ int data = *(unsigned short *)port->data_in; ++ *port->writep = (data & 0x0ff0) >> 4; ++ *(port->writep + 1) = data & 0x0f; ++ port->writep+=2; ++ } ++ break; ++ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit): ++ *(unsigned short*)port->writep = *(volatile unsigned short *)port->data_in; ++ port->writep+=2; ++ break; ++ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit): ++ *(unsigned int*)port->writep = *port->data_in; ++ port->writep+=3; ++ break; ++ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit): ++ *(unsigned int*)port->writep = *port->data_in; ++ port->writep+=4; ++ break; ++ } ++ ++ if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */ ++ port->writep = port->flip; ++ if (port->writep == port->readp) { ++ /* receive buffer overrun, discard oldest data ++ */ ++ port->readp++; ++ if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */ ++ port->readp = port->flip; ++ } ++ if (sync_data_avail(port) >= port->inbufchunk) ++ wake_up_interruptible(&port->in_wait_q); /* Wake up application */ ++ } ++ ++ if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) /* Transmitter ready? */ ++ { ++ if (port->out_count > 0) /* More data to send */ ++ send_word(port); ++ else /* transmission finished */ ++ { ++ *R_IRQ_MASK1_CLR = 1 << port->transmitter_ready_bit; /* Turn off IRQ */ ++ wake_up_interruptible(&port->out_wait_q); /* Wake up application */ ++ } ++ } ++ } ++ return IRQ_RETVAL(handled); ++} ++#endif ++ ++module_init(etrax_sync_serial_init); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/debugport.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/debugport.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/debugport.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/debugport.c 2006-10-30 16:17:57.000000000 +0100 +@@ -12,6 +12,34 @@ + * init_etrax_debug() + * + * $Log: debugport.c,v $ ++ * Revision 1.36 2006/10/30 15:17:57 pkj ++ * Avoid a compiler warning. ++ * ++ * Revision 1.35 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.34 2006/09/29 10:32:01 starvik ++ * Don't reference serial driver if not present ++ * ++ * Revision 1.33 2006/09/08 07:59:29 karljope ++ * Makes v10 boot again when watchdog is enabled ++ * ++ * Revision 1.32 2006/06/20 08:23:36 pkj ++ * Reverted incorrect merge. ++ * ++ * Revision 1.31 2006/05/17 12:22:10 edgar ++ * check port before disable ints ++ * ++ * Revision 1.30 2005/11/15 12:08:42 starvik ++ * Set index when no debug port is defined ++ * ++ * Revision 1.29 2005/08/29 07:32:17 starvik ++ * Merge of 2.6.13 ++ * ++ * Revision 1.28 2005/07/02 12:29:35 starvik ++ * Use the generic oops_in_progress instead of the raw_printk hack. ++ * Moved some functions to achr-independent code. ++ * + * Revision 1.27 2005/06/10 10:34:14 starvik + * Real console support + * +@@ -112,6 +140,8 @@ + #include <asm/arch/svinto.h> + #include <asm/io.h> /* Get SIMCOUT. */ + ++extern void reset_watchdog(void); ++ + struct dbg_port + { + unsigned int index; +@@ -188,7 +218,9 @@ + } + }; + ++#ifdef CONFIG_ETRAX_SERIAL + extern struct tty_driver *serial_driver; ++#endif + + struct dbg_port* port = + #if defined(CONFIG_ETRAX_DEBUG_PORT0) +@@ -368,11 +400,12 @@ + { + int i; + unsigned long flags; +- local_irq_save(flags); +- ++ + if (!port) + return; +- ++ ++ local_irq_save(flags); ++ + /* Send data */ + for (i = 0; i < len; i++) { + /* LF -> CRLF */ +@@ -386,26 +419,16 @@ + ; + *port->write = buf[i]; + } +- local_irq_restore(flags); +-} + +-int raw_printk(const char *fmt, ...) +-{ +- static char buf[1024]; +- int printed_len; +- static int first = 1; +- if (first) { +- /* Force reinitialization of the port to get manual mode. */ +- port->started = 0; +- start_port(port); +- first = 0; +- } +- va_list args; +- va_start(args, fmt); +- printed_len = vsnprintf(buf, sizeof(buf), fmt, args); +- va_end(args); +- console_write_direct(NULL, buf, strlen(buf)); +- return printed_len; ++ /* ++ * Feed the watchdog, otherwise it will reset the chip during boot. ++ * The time to send an ordinary boot message line (10-90 chars) ++ * varies between 1-8ms at 115200. What makes up for the additional ++ * 90ms that allows the watchdog to bite? ++ */ ++ reset_watchdog(); ++ ++ local_irq_restore(flags); + } + + static void +@@ -500,6 +523,7 @@ + return 0; + } + ++ + /* This is a dummy serial device that throws away anything written to it. + * This is used when no debug output is wanted. + */ +@@ -555,7 +579,13 @@ + { + if (port) + *index = port->index; ++ else ++ *index = 0; ++#ifdef CONFIG_ETRAX_SERIAL + return port ? serial_driver : &dummy_driver; ++#else ++ return &dummy_driver; ++#endif + } + + static struct console sercons = { +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/entry.S linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/entry.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/entry.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/entry.S 2007-01-09 10:36:17.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: entry.S,v 1.28 2005/06/20 05:06:30 starvik Exp $ ++/* $Id: entry.S,v 1.38 2007/01/09 09:36:17 starvik Exp $ + * + * linux/arch/cris/entry.S + * +@@ -7,6 +7,41 @@ + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * $Log: entry.S,v $ ++ * Revision 1.38 2007/01/09 09:36:17 starvik ++ * Corrected kernel_execve ++ * ++ * Revision 1.37 2007/01/09 09:29:18 starvik ++ * Merge of Linux 2.6.19 ++ * ++ * Revision 1.36 2006/12/08 13:08:54 orjanf ++ * Copied from Linux 2.4: ++ * * Return from an pin-generated NMI the same way as for other interrupts. ++ * * Reverse check order between external nmi and watchdog nmi to avoid false ++ * watchdog oops in case of a glitch on the nmi pin. ++ * ++ * Revision 1.35 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.34 2006/06/25 15:00:09 starvik ++ * Merge of Linux 2.6.17 ++ * ++ * Revision 1.33 2006/05/19 12:23:09 orjanf ++ * * Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to ++ * low-level asm interrupt handlers. Fixed in the multiple interrupt handler ++ * also. Copied from Linux 2.4. ++ * ++ * Revision 1.32 2006/03/23 14:53:57 starvik ++ * Corrected signal handling. ++ * ++ * Revision 1.31 2006/03/22 09:56:55 starvik ++ * Merge of Linux 2.6.16 ++ * ++ * Revision 1.30 2005/10/31 08:48:03 starvik ++ * Merge of Linux 2.6.14 ++ * ++ * Revision 1.29 2005/08/29 07:32:17 starvik ++ * Merge of 2.6.13 ++ * + * Revision 1.28 2005/06/20 05:06:30 starvik + * Remove unnecessary diff to kernel.org tree + * +@@ -500,9 +535,8 @@ + ;; deal with pending signals and notify-resume requests + + move.d $r9, $r10 ; do_notify_resume syscall/irq param +- moveq 0, $r11 ; oldset param - 0 in this case +- move.d $sp, $r12 ; the regs param +- move.d $r1, $r13 ; the thread_info_flags parameter ++ move.d $sp, $r11 ; the regs param ++ move.d $r1, $r12 ; the thread_info_flags parameter + jsr do_notify_resume + + ba _Rexit +@@ -653,7 +687,7 @@ + ;; special handlers for breakpoint and NMI + hwbreakpoint: + push $dccr +- di ++ di + push $r10 + push $r11 + move.d [hw_bp_trig_ptr],$r10 +@@ -678,13 +712,19 @@ + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal frame + ++ ;; If there is a glitch on the NMI pin shorter than ~100ns ++ ;; (i.e. non-active by the time we get here) then the nmi_pin bit ++ ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit ++ ;; is cleared by us however (when feeding the watchdog), which is why ++ ;; we use that bit to determine what brought us here. ++ + move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog? +- and.d 0x80000000, $r1 +- beq wdog ++ and.d (1<<30), $r1 ++ bne wdog + move.d $sp, $r10 + jsr handle_nmi + setf m ; Enable NMI again +- retb ; Return from NMI ++ ba _Rexit ; Return the standard way + nop + wdog: + #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM) +@@ -774,23 +814,10 @@ + movem $r13, [$sp] + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal frame +- +- moveq 2, $r2 ; first bit we care about is the timer0 irq +- move.d [R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq +- move.d $r0, [R_VECT_MASK_CLR] ; Block all active IRQs +-1: +- btst $r2, $r0 ; check for the irq given by bit r2 +- bpl 2f +- move.d $r2, $r10 ; First argument to do_IRQ +- move.d $sp, $r11 ; second argument to do_IRQ +- jsr do_IRQ +-2: +- addq 1, $r2 ; next vector bit +- cmp.b 32, $r2 +- bne 1b ; process all irq's up to and including number 31 +- moveq 0, $r9 ; make ret_from_intr realise we came from an ir +- +- move.d $r0, [R_VECT_MASK_SET] ; Unblock all the IRQs ++ ++ move.d $sp, $r10 ++ jsr do_multiple_IRQ ++ + jump ret_from_intr + + do_sigtrap: +@@ -836,6 +863,13 @@ + pop $r0 ; Restore r0. + ba do_sigtrap ; SIGTRAP the offending process. + pop $dccr ; Restore dccr in delay slot. ++ ++ .global kernel_execve ++kernel_execve: ++ move.d __NR_execve, $r9 ++ break 13 ++ ret ++ nop + + .data + +@@ -1135,7 +1169,38 @@ + .long sys_add_key + .long sys_request_key + .long sys_keyctl +- ++ .long sys_ioprio_set ++ .long sys_ioprio_get /* 290 */ ++ .long sys_inotify_init ++ .long sys_inotify_add_watch ++ .long sys_inotify_rm_watch ++ .long sys_migrate_pages ++ .long sys_openat /* 295 */ ++ .long sys_mkdirat ++ .long sys_mknodat ++ .long sys_fchownat ++ .long sys_futimesat ++ .long sys_fstatat64 /* 300 */ ++ .long sys_unlinkat ++ .long sys_renameat ++ .long sys_linkat ++ .long sys_symlinkat ++ .long sys_readlinkat /* 305 */ ++ .long sys_fchmodat ++ .long sys_faccessat ++ .long sys_pselect6 ++ .long sys_ppoll ++ .long sys_unshare /* 310 */ ++ .long sys_set_robust_list ++ .long sys_get_robust_list ++ .long sys_splice ++ .long sys_sync_file_range ++ .long sys_tee /* 315 */ ++ .long sys_vmsplice ++ .long sys_move_pages ++ .long sys_getcpu ++ .long sys_epoll_pwait ++ + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/fasttimer.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/fasttimer.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/fasttimer.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/fasttimer.c 2007-02-05 12:54:34.000000000 +0100 +@@ -1,97 +1,10 @@ +-/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $ ++/* + * linux/arch/cris/kernel/fasttimer.c + * + * Fast timers for ETRAX100/ETRAX100LX + * This may be useful in other OS than Linux so use 2 space indentation... + * +- * $Log: fasttimer.c,v $ +- * Revision 1.9 2005/03/04 08:16:16 starvik +- * Merge of Linux 2.6.11. +- * +- * Revision 1.8 2005/01/05 06:09:29 starvik +- * cli()/sti() will be obsolete in 2.6.11. +- * +- * Revision 1.7 2005/01/03 13:35:46 starvik +- * Removed obsolete stuff. +- * Mark fast timer IRQ as not shared. +- * +- * Revision 1.6 2004/05/14 10:18:39 starvik +- * Export fast_timer_list +- * +- * Revision 1.5 2004/05/14 07:58:01 starvik +- * Merge of changes from 2.4 +- * +- * Revision 1.4 2003/07/04 08:27:41 starvik +- * Merge of Linux 2.5.74 +- * +- * Revision 1.3 2002/12/12 08:26:32 starvik +- * Don't use C-comments inside CVS comments +- * +- * Revision 1.2 2002/12/11 15:42:02 starvik +- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ +- * +- * Revision 1.1 2002/11/18 07:58:06 starvik +- * Fast timers (from Linux 2.4) +- * +- * Revision 1.5 2002/10/15 06:21:39 starvik +- * Added call to init_waitqueue_head +- * +- * Revision 1.4 2002/05/28 17:47:59 johana +- * Added del_fast_timer() +- * +- * Revision 1.3 2002/05/28 16:16:07 johana +- * Handle empty fast_timer_list +- * +- * Revision 1.2 2002/05/27 15:38:42 johana +- * Made it compile without warnings on Linux 2.4. +- * (includes, wait_queue, PROC_FS and snprintf) +- * +- * Revision 1.1 2002/05/27 15:32:25 johana +- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. +- * +- * Revision 1.8 2001/11/27 13:50:40 pkj +- * Disable interrupts while stopping the timer and while modifying the +- * list of active timers in timer1_handler() as it may be interrupted +- * by other interrupts (e.g., the serial interrupt) which may add fast +- * timers. +- * +- * Revision 1.7 2001/11/22 11:50:32 pkj +- * * Only store information about the last 16 timers. +- * * proc_fasttimer_read() now uses an allocated buffer, since it +- * requires more space than just a page even for only writing the +- * last 16 timers. The buffer is only allocated on request, so +- * unless /proc/fasttimer is read, it is never allocated. +- * * Renamed fast_timer_started to fast_timers_started to match +- * fast_timers_added and fast_timers_expired. +- * * Some clean-up. +- * +- * Revision 1.6 2000/12/13 14:02:08 johana +- * Removed volatile for fast_timer_list +- * +- * Revision 1.5 2000/12/13 13:55:35 johana +- * Added DEBUG_LOG, added som cli() and cleanup +- * +- * Revision 1.4 2000/12/05 13:48:50 johana +- * Added range check when writing proc file, modified timer int handling +- * +- * Revision 1.3 2000/11/23 10:10:20 johana +- * More debug/logging possibilities. +- * Moved GET_JIFFIES_USEC() to timex.h and time.c +- * +- * Revision 1.2 2000/11/01 13:41:04 johana +- * Clean up and bugfixes. +- * Created new do_gettimeofday_fast() that gets a timeval struct +- * with time based on jiffies and *R_TIMER0_DATA, uses a table +- * for fast conversion of timer value to microseconds. +- * (Much faster the standard do_gettimeofday() and we don't really +- * wan't to use the true time - we wan't the "uptime" so timers don't screw up +- * when we change the time. +- * TODO: Add efficient support for continuous timers as well. +- * +- * Revision 1.1 2000/10/26 15:49:16 johana +- * Added fasttimer, highresolution timers. +- * +- * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden ++ * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden + */ + + #include <linux/errno.h> +@@ -136,13 +49,13 @@ + + #define __INLINE__ inline + +-static int fast_timer_running = 0; +-static int fast_timers_added = 0; +-static int fast_timers_started = 0; +-static int fast_timers_expired = 0; +-static int fast_timers_deleted = 0; +-static int fast_timer_is_init = 0; +-static int fast_timer_ints = 0; ++static unsigned int fast_timer_running = 0; ++static unsigned int fast_timers_added = 0; ++static unsigned int fast_timers_started = 0; ++static unsigned int fast_timers_expired = 0; ++static unsigned int fast_timers_deleted = 0; ++static unsigned int fast_timer_is_init = 0; ++static unsigned int fast_timer_ints = 0; + + struct fast_timer *fast_timer_list = NULL; + +@@ -150,8 +63,8 @@ + #define DEBUG_LOG_MAX 128 + static const char * debug_log_string[DEBUG_LOG_MAX]; + static unsigned long debug_log_value[DEBUG_LOG_MAX]; +-static int debug_log_cnt = 0; +-static int debug_log_cnt_wrapped = 0; ++static unsigned int debug_log_cnt = 0; ++static unsigned int debug_log_cnt_wrapped = 0; + + #define DEBUG_LOG(string, value) \ + { \ +@@ -206,41 +119,25 @@ + int timer_delay_settings[NUM_TIMER_STATS]; + + /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ +-void __INLINE__ do_gettimeofday_fast(struct timeval *tv) ++void __INLINE__ do_gettimeofday_fast(struct fasttime_t *tv) + { +- unsigned long sec = jiffies; +- unsigned long usec = GET_JIFFIES_USEC(); +- +- usec += (sec % HZ) * (1000000 / HZ); +- sec = sec / HZ; +- +- if (usec > 1000000) +- { +- usec -= 1000000; +- sec++; +- } +- tv->tv_sec = sec; +- tv->tv_usec = usec; ++ tv->tv_jiff = jiffies; ++ tv->tv_usec = GET_JIFFIES_USEC(); + } + +-int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) ++int __INLINE__ timeval_cmp(struct fasttime_t *t0, struct fasttime_t *t1) + { +- if (t0->tv_sec < t1->tv_sec) +- { ++ /* Compare jiffies. Takes care of wrapping */ ++ if (time_before(t0->tv_jiff, t1->tv_jiff)) + return -1; +- } +- else if (t0->tv_sec > t1->tv_sec) +- { ++ else if (time_after(t0->tv_jiff, t1->tv_jiff)) + return 1; +- } ++ ++ /* Compare us */ + if (t0->tv_usec < t1->tv_usec) +- { + return -1; +- } + else if (t0->tv_usec > t1->tv_usec) +- { + return 1; +- } + return 0; + } + +@@ -340,7 +237,7 @@ + printk(KERN_WARNING + "timer name: %s data: 0x%08lX already in list!\n", name, data); + sanity_failed++; +- return; ++ goto done; + } + else + { +@@ -356,11 +253,11 @@ + t->name = name; + + t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; +- t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; ++ t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; + if (t->tv_expires.tv_usec > 1000000) + { + t->tv_expires.tv_usec -= 1000000; +- t->tv_expires.tv_sec++; ++ t->tv_expires.tv_jiff += HZ; + } + #ifdef FAST_TIMER_LOG + timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; +@@ -401,6 +298,7 @@ + + D2(printk("start_one_shot_timer: %d us done\n", delay_us)); + ++done: + local_irq_restore(flags); + } /* start_one_shot_timer */ + +@@ -444,11 +342,18 @@ + /* Timer 1 interrupt handler */ + + static irqreturn_t +-timer1_handler(int irq, void *dev_id, struct pt_regs *regs) ++timer1_handler(int irq, void *dev_id) + { + struct fast_timer *t; + unsigned long flags; + ++ /* We keep interrupts disabled not only when we modify the ++ * fast timer list, but any time we hold a reference to a ++ * timer in the list, since del_fast_timer may be called ++ * from (another) interrupt context. Thus, the only time ++ * when interrupts are enabled is when calling the timer ++ * callback function. ++ */ + local_irq_save(flags); + + /* Clear timer1 irq */ +@@ -466,16 +371,16 @@ + fast_timer_running = 0; + fast_timer_ints++; + +- local_irq_restore(flags); +- + t = fast_timer_list; + while (t) + { +- struct timeval tv; ++ struct fasttime_t tv; ++ fast_timer_function_type *f; ++ unsigned long d; + + /* Has it really expired? */ + do_gettimeofday_fast(&tv); +- D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); ++ D1(printk("t: %is %06ius\n", tv.tv_jiff, tv.tv_usec)); + + if (timeval_cmp(&t->tv_expires, &tv) <= 0) + { +@@ -486,7 +391,6 @@ + fast_timers_expired++; + + /* Remove this timer before call, since it may reuse the timer */ +- local_irq_save(flags); + if (t->prev) + { + t->prev->next = t->next; +@@ -501,11 +405,21 @@ + } + t->prev = NULL; + t->next = NULL; +- local_irq_restore(flags); + +- if (t->function != NULL) ++ /* Save function callback data before enabling interrupts, ++ * since the timer may be removed and we don't know how it ++ * was allocated (e.g. ->function and ->data may become ++ * overwritten after deletion if the timer was stack-allocated). ++ */ ++ f = t->function; ++ d = t->data; ++ ++ if (f != NULL) + { +- t->function(t->data); ++ /* Run the callback function with interrupts enabled. */ ++ local_irq_restore(flags); ++ f(d); ++ local_irq_save(flags); + } + else + { +@@ -518,16 +432,19 @@ + D1(printk(".\n")); + } + +- local_irq_save(flags); + if ((t = fast_timer_list) != NULL) + { + /* Start next timer.. */ +- long us; +- struct timeval tv; ++ long us = 0; ++ struct fasttime_t tv; + + do_gettimeofday_fast(&tv); +- us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + +- t->tv_expires.tv_usec - tv.tv_usec); ++ ++ /* time_after_eq takes care of wrapping */ ++ if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) ++ us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * 1000000 / HZ + ++ t->tv_expires.tv_usec - tv.tv_usec); ++ + if (us > 0) + { + if (!fast_timer_running) +@@ -537,7 +454,6 @@ + #endif + start_timer1(us); + } +- local_irq_restore(flags); + break; + } + else +@@ -548,9 +464,10 @@ + D1(printk("e! %d\n", us)); + } + } +- local_irq_restore(flags); + } + ++ local_irq_restore(flags); ++ + if (!t) + { + D1(printk("t1 stop!\n")); +@@ -575,28 +492,17 @@ + void schedule_usleep(unsigned long us) + { + struct fast_timer t; +-#ifdef DECLARE_WAITQUEUE + wait_queue_head_t sleep_wait; + init_waitqueue_head(&sleep_wait); +- { +- DECLARE_WAITQUEUE(wait, current); +-#else +- struct wait_queue *sleep_wait = NULL; +- struct wait_queue wait = { current, NULL }; +-#endif + + D1(printk("schedule_usleep(%d)\n", us)); +- add_wait_queue(&sleep_wait, &wait); +- set_current_state(TASK_INTERRUPTIBLE); + start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, + "usleep"); +- schedule(); +- set_current_state(TASK_RUNNING); +- remove_wait_queue(&sleep_wait, &wait); ++ /* Uninterruptible sleep on the fast timer. (The condition is somewhat ++ redundant since the timer is what wakes us up.) */ ++ wait_event(sleep_wait, !fast_timer_pending(&t)); ++ + D1(printk("done schedule_usleep(%d)\n", us)); +-#ifdef DECLARE_WAITQUEUE +- } +-#endif + } + + #ifdef CONFIG_PROC_FS +@@ -616,7 +522,7 @@ + unsigned long flags; + int i = 0; + int num_to_show; +- struct timeval tv; ++ struct fasttime_t tv; + struct fast_timer *t, *nextt; + static char *bigbuf = NULL; + static unsigned long used; +@@ -624,7 +530,8 @@ + if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) + { + used = 0; +- bigbuf[0] = '\0'; ++ if (buf) ++ buf[0] = '\0'; + return 0; + } + +@@ -646,7 +553,7 @@ + used += sprintf(bigbuf + used, "Fast timer running: %s\n", + fast_timer_running ? "yes" : "no"); + used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", +- (unsigned long)tv.tv_sec, ++ (unsigned long)tv.tv_jiff, + (unsigned long)tv.tv_usec); + #ifdef FAST_TIMER_SANITY_CHECKS + used += sprintf(bigbuf + used, "Sanity failed: %i\n", +@@ -696,9 +603,9 @@ + "d: %6li us data: 0x%08lX" + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +@@ -718,9 +625,9 @@ + "d: %6li us data: 0x%08lX" + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +@@ -738,9 +645,9 @@ + "d: %6li us data: 0x%08lX" + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +@@ -761,15 +668,15 @@ + /* " func: 0x%08lX" */ + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data + /* , t->function */ + ); +- local_irq_disable(); ++ local_irq_save(flags); + if (t->next != nextt) + { + printk(KERN_WARNING "timer removed!\n"); +@@ -798,7 +705,7 @@ + static struct fast_timer tr[10]; + static int exp_num[10]; + +-static struct timeval tv_exp[100]; ++static struct fasttime_t tv_exp[100]; + + static void test_timeout(unsigned long data) + { +@@ -836,7 +743,7 @@ + int prev_num; + int j; + +- struct timeval tv, tv0, tv1, tv2; ++ struct fasttime_t tv, tv0, tv1, tv2; + + printk("fast_timer_test() start\n"); + do_gettimeofday_fast(&tv); +@@ -849,7 +756,7 @@ + { + do_gettimeofday_fast(&tv_exp[j]); + } +- printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); ++ printk("fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec); + + for (j = 0; j < 1000; j++) + { +@@ -859,11 +766,11 @@ + for (j = 0; j < 100; j++) + { + printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", +- tv_exp[j].tv_sec,tv_exp[j].tv_usec, +- tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, +- tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, +- tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, +- tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); ++ tv_exp[j].tv_jiff,tv_exp[j].tv_usec, ++ tv_exp[j+1].tv_jiff,tv_exp[j+1].tv_usec, ++ tv_exp[j+2].tv_jiff,tv_exp[j+2].tv_usec, ++ tv_exp[j+3].tv_jiff,tv_exp[j+3].tv_usec, ++ tv_exp[j+4].tv_jiff,tv_exp[j+4].tv_usec); + j += 4; + } + do_gettimeofday_fast(&tv0); +@@ -895,9 +802,9 @@ + } + } + do_gettimeofday_fast(&tv2); +- printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); +- printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); +- printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); ++ printk("Timers started %is %06i\n", tv0.tv_jiff, tv0.tv_usec); ++ printk("Timers started at %is %06i\n", tv1.tv_jiff, tv1.tv_usec); ++ printk("Timers done %is %06i\n", tv2.tv_jiff, tv2.tv_usec); + DP(printk("buf0:\n"); + printk(buf0); + printk("buf1:\n"); +@@ -919,9 +826,9 @@ + printk("%-10s set: %6is %06ius exp: %6is %06ius " + "data: 0x%08X func: 0x%08X\n", + t->name, +- t->tv_set.tv_sec, ++ t->tv_set.tv_jiff, + t->tv_set.tv_usec, +- t->tv_expires.tv_sec, ++ t->tv_expires.tv_jiff, + t->tv_expires.tv_usec, + t->data, + t->function +@@ -929,10 +836,10 @@ + + printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", + t->delay_us, +- tv_exp[j].tv_sec, ++ tv_exp[j].tv_jiff, + tv_exp[j].tv_usec, + exp_num[j], +- (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); ++ (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); + } + proc_fasttimer_read(buf5, NULL, 0, 0, 0); + printk("buf5 after all done:\n"); +@@ -942,7 +849,7 @@ + #endif + + +-void fast_timer_init(void) ++int fast_timer_init(void) + { + /* For some reason, request_irq() hangs when called froom time_init() */ + if (!fast_timer_is_init) +@@ -975,4 +882,6 @@ + fast_timer_test(); + #endif + } ++ return 0; + } ++__initcall(fast_timer_init); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/head.S linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/head.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/head.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/head.S 2006-10-20 09:33:26.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $ ++/* $Id: head.S,v 1.13 2006/10/20 07:33:26 kjelld Exp $ + * + * Head of the kernel - alter with care + * +@@ -7,6 +7,19 @@ + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * $Log: head.S,v $ ++ * Revision 1.13 2006/10/20 07:33:26 kjelld ++ * If serial port 2 is used, select it in R_GEN_CONFIG. ++ * If serial port 2 is used, setup the control registers for the port. ++ * This is done to avoid a puls on the TXD line during start up. ++ * This puls could disturbe some units (e.g. some Axis 214 with internal ++ * ver. 1.08). ++ * ++ * Revision 1.12 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.11 2005/08/29 07:32:17 starvik ++ * Merge of 2.6.13 ++ * + * Revision 1.10 2005/06/20 05:12:54 starvik + * Remove unnecessary diff to kernel.org tree + * +@@ -595,11 +608,17 @@ + + moveq 0,$r0 + ++ ;; Select or disable serial port 2 ++#ifdef CONFIG_ETRAX_SERIAL_PORT2 ++ or.d IO_STATE (R_GEN_CONFIG, ser2, select),$r0 ++#else ++ or.d IO_STATE (R_GEN_CONFIG, ser2, disable),$r0 ++#endif ++ + ;; Init interfaces (disable them). + or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \ + | IO_STATE (R_GEN_CONFIG, ata, disable) \ + | IO_STATE (R_GEN_CONFIG, par0, disable) \ +- | IO_STATE (R_GEN_CONFIG, ser2, disable) \ + | IO_STATE (R_GEN_CONFIG, mio, disable) \ + | IO_STATE (R_GEN_CONFIG, scsi1, disable) \ + | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \ +@@ -801,6 +820,41 @@ + | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0 + move.b $r0,[R_SERIAL1_TR_CTRL] + ++#ifdef CONFIG_ETRAX_SERIAL_PORT2 ++ ;; setup the serial port 2 at 115200 baud for debug purposes ++ ++ moveq IO_STATE (R_SERIAL2_XOFF, tx_stop, enable) \ ++ | IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable) \ ++ | IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0 ++ move.d $r0,[R_SERIAL2_XOFF] ++ ++ ; 115.2kbaud for both transmit and receive ++ move.b IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz) \ ++ | IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0 ++ move.b $r0,[R_SERIAL2_BAUD] ++ ++ ; Set up and enable the serial2 receiver. ++ move.b IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, rts_, active) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable) \ ++ | IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0 ++ move.b $r0,[R_SERIAL2_REC_CTRL] ++ ++ ; Set up and enable the serial2 transmitter. ++ move.b IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable) \ ++ | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0 ++ move.b $r0,[R_SERIAL2_TR_CTRL] ++#endif + + #ifdef CONFIG_ETRAX_SERIAL_PORT3 + ;; setup the serial port 3 at 115200 baud for debug purposes +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/io_interface_mux.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/io_interface_mux.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/io_interface_mux.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/io_interface_mux.c 2006-10-04 20:21:18.000000000 +0200 +@@ -1,10 +1,10 @@ + /* IO interface mux allocator for ETRAX100LX. +- * Copyright 2004, Axis Communications AB +- * $Id: io_interface_mux.c,v 1.2 2004/12/21 12:08:38 starvik Exp $ ++ * Copyright 2004-2006, Axis Communications AB ++ * $Id: io_interface_mux.c,v 1.4 2006/10/04 18:21:18 henriken Exp $ + */ + + +-/* C.f. ETRAX100LX Designer's Reference 20.9 */ ++/* C.f. ETRAX100LX Designer's Reference 19.9 */ + + #include <linux/kernel.h> + #include <linux/slab.h> +@@ -35,7 +35,7 @@ + struct watcher + { + void (*notify)(const unsigned int gpio_in_available, +- const unsigned int gpio_out_available, ++ const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available); + struct watcher *next; +@@ -45,17 +45,40 @@ + struct if_group + { + enum io_if_group group; +- unsigned char used; +- enum cris_io_interface owner; ++ // name - the name of the group 'A' to 'F' ++ char *name; ++ // used - a bit mask of all pins in the group in the order listed ++ // in in the tables in 19.9.1 to 19.9.6. Note that no ++ // distinction is made between in, out and in/out pins. ++ unsigned int used; + }; + + + struct interface + { + enum cris_io_interface ioif; ++ // name - the name of the interface ++ char *name; ++ // groups - OR'ed together io_if_group flags describing what pin groups ++ // the interface uses pins in. + unsigned char groups; ++ // used - set when the interface is allocated. + unsigned char used; + char *owner; ++ // group_a through group_f - bit masks describing what pins in the ++ // pin groups the interface uses. ++ unsigned int group_a; ++ unsigned int group_b; ++ unsigned int group_c; ++ unsigned int group_d; ++ unsigned int group_e; ++ unsigned int group_f; ++ ++ // gpio_g_in, gpio_g_out, gpio_b - bit masks telling what pins in the ++ // GPIO ports the interface uses. This ++ // could be reconstucted using the group_X ++ // masks and a table of what pins the GPIO ++ // ports use, but that would be messy. + unsigned int gpio_g_in; + unsigned int gpio_g_out; + unsigned char gpio_b; +@@ -64,26 +87,32 @@ + static struct if_group if_groups[6] = { + { + .group = group_a, ++ .name = "A", + .used = 0, + }, + { + .group = group_b, ++ .name = "B", + .used = 0, + }, + { + .group = group_c, ++ .name = "C", + .used = 0, + }, + { + .group = group_d, ++ .name = "D", + .used = 0, + }, + { + .group = group_e, ++ .name = "E", + .used = 0, + }, + { + .group = group_f, ++ .name = "F", + .used = 0, + } + }; +@@ -94,14 +123,32 @@ + /* Begin Non-multiplexed interfaces */ + { + .ioif = if_eth, ++ .name = "ethernet", + .groups = 0, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0, + .gpio_g_out = 0, + .gpio_b = 0 + }, + { + .ioif = if_serial_0, ++ .name = "serial_0", + .groups = 0, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0, + .gpio_g_out = 0, + .gpio_b = 0 +@@ -109,172 +156,385 @@ + /* End Non-multiplexed interfaces */ + { + .ioif = if_serial_1, ++ .name = "serial_1", + .groups = group_e, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0x0f, ++ .group_f = 0, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x00 + }, + { + .ioif = if_serial_2, ++ .name = "serial_2", + .groups = group_b, ++ ++ .group_a = 0, ++ .group_b = 0x0f, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x000000c0, + .gpio_g_out = 0x000000c0, + .gpio_b = 0x00 + }, + { + .ioif = if_serial_3, ++ .name = "serial_3", + .groups = group_c, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0x0f, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x00 + }, + { + .ioif = if_sync_serial_1, +- .groups = group_e | group_f, /* if_sync_serial_1 and if_sync_serial_3 +- can be used simultaneously */ ++ .name = "sync_serial_1", ++ .groups = group_e | group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0x0f, ++ .group_f = 0x10, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x10 + }, + { + .ioif = if_sync_serial_3, ++ .name = "sync_serial_3", + .groups = group_c | group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0x0f, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0x80, ++ + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x80 + }, + { + .ioif = if_shared_ram, ++ .name = "shared_ram", + .groups = group_a, ++ ++ .group_a = 0x7f8ff, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x0000ff3e, + .gpio_g_out = 0x0000ff38, + .gpio_b = 0x00 + }, + { + .ioif = if_shared_ram_w, ++ .name = "shared_ram_w", + .groups = group_a | group_d, ++ ++ .group_a = 0x7f8ff, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0xff, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x00ffff3e, + .gpio_g_out = 0x00ffff38, + .gpio_b = 0x00 + }, + { + .ioif = if_par_0, ++ .name = "par_0", + .groups = group_a, ++ ++ .group_a = 0x7fbff, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x0000ff3e, + .gpio_g_out = 0x0000ff3e, + .gpio_b = 0x00 + }, + { + .ioif = if_par_1, ++ .name = "par_1", + .groups = group_d, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0x7feff, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x3eff0000, + .gpio_g_out = 0x3eff0000, + .gpio_b = 0x00 + }, + { + .ioif = if_par_w, ++ .name = "par_w", + .groups = group_a | group_d, ++ ++ .group_a = 0x7fbff, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0xff, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x00ffff3e, + .gpio_g_out = 0x00ffff3e, + .gpio_b = 0x00 + }, + { + .ioif = if_scsi8_0, +- .groups = group_a | group_b | group_f, /* if_scsi8_0 and if_scsi8_1 +- can be used simultaneously */ ++ .name = "scsi8_0", ++ .groups = group_a | group_b | group_f, ++ ++ .group_a = 0x7ffff, ++ .group_b = 0x0f, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0x10, ++ + .gpio_g_in = 0x0000ffff, + .gpio_g_out = 0x0000ffff, + .gpio_b = 0x10 + }, + { + .ioif = if_scsi8_1, +- .groups = group_c | group_d | group_f, /* if_scsi8_0 and if_scsi8_1 +- can be used simultaneously */ ++ .name = "scsi8_1", ++ .groups = group_c | group_d | group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0x0f, ++ .group_d = 0x7ffff, ++ .group_e = 0, ++ .group_f = 0x80, ++ + .gpio_g_in = 0xffff0000, + .gpio_g_out = 0xffff0000, + .gpio_b = 0x80 + }, + { + .ioif = if_scsi_w, ++ .name = "scsi_w", + .groups = group_a | group_b | group_d | group_f, ++ ++ .group_a = 0x7ffff, ++ .group_b = 0x0f, ++ .group_c = 0, ++ .group_d = 0x601ff, ++ .group_e = 0, ++ .group_f = 0x90, ++ + .gpio_g_in = 0x01ffffff, + .gpio_g_out = 0x07ffffff, + .gpio_b = 0x80 + }, + { + .ioif = if_ata, ++ .name = "ata", + .groups = group_a | group_b | group_c | group_d, ++ ++ .group_a = 0x7ffff, ++ .group_b = 0x0f, ++ .group_c = 0x0f, ++ .group_d = 0x7cfff, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0xf9ffffff, + .gpio_g_out = 0xffffffff, + .gpio_b = 0x80 + }, + { + .ioif = if_csp, +- .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ ++ .name = "csp", ++ .groups = group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0xfc, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0xfc + }, + { + .ioif = if_i2c, +- .groups = group_f, /* if_csp and if_i2c can be used simultaneously */ ++ .name = "i2c", ++ .groups = group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0x03, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x03 + }, + { + .ioif = if_usb_1, ++ .name = "usb_1", + .groups = group_e | group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0x0f, ++ .group_f = 0x2c, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x2c + }, + { + .ioif = if_usb_2, ++ .name = "usb_2", + .groups = group_d, +- .gpio_g_in = 0x0e000000, +- .gpio_g_out = 0x3c000000, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0x33e00, ++ .group_f = 0, ++ ++ .gpio_g_in = 0x3e000000, ++ .gpio_g_out = 0x0c000000, + .gpio_b = 0x00 + }, + /* GPIO pins */ + { + .ioif = if_gpio_grp_a, ++ .name = "gpio_a", + .groups = group_a, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x0000ff3f, + .gpio_g_out = 0x0000ff3f, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_b, ++ .name = "gpio_b", + .groups = group_b, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x000000c0, + .gpio_g_out = 0x000000c0, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_c, ++ .name = "gpio_c", + .groups = group_c, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0xc0000000, + .gpio_g_out = 0xc0000000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_d, ++ .name = "gpio_d", + .groups = group_d, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x3fff0000, + .gpio_g_out = 0x3fff0000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_e, ++ .name = "gpio_e", + .groups = group_e, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0x00 + }, + { + .ioif = if_gpio_grp_f, ++ .name = "gpio_f", + .groups = group_f, ++ ++ .group_a = 0, ++ .group_b = 0, ++ .group_c = 0, ++ .group_d = 0, ++ .group_e = 0, ++ .group_f = 0, ++ + .gpio_g_in = 0x00000000, + .gpio_g_out = 0x00000000, + .gpio_b = 0xff +@@ -284,11 +544,13 @@ + + static struct watcher *watchers = NULL; + ++// The pins that are free to use in the GPIO ports. + static unsigned int gpio_in_pins = 0xffffffff; + static unsigned int gpio_out_pins = 0xffffffff; + static unsigned char gpio_pb_pins = 0xff; + static unsigned char gpio_pa_pins = 0xff; + ++// Identifiers for the owners of the GPIO pins. + static enum cris_io_interface gpio_pa_owners[8]; + static enum cris_io_interface gpio_pb_owners[8]; + static enum cris_io_interface gpio_pg_owners[32]; +@@ -318,7 +580,7 @@ + struct watcher *w = watchers; + + DBG(printk("io_interface_mux: notifying watchers\n")); +- ++ + while (NULL != w) { + w->notify((const unsigned int)gpio_in_pins, + (const unsigned int)gpio_out_pins, +@@ -354,37 +616,48 @@ + + if (interfaces[ioif].used) { + local_irq_restore(flags); +- printk(KERN_CRIT "cris_io_interface: Cannot allocate interface for %s, in use by %s\n", ++ printk(KERN_CRIT "cris_io_interface: Cannot allocate interface %s for %s, in use by %s\n", ++ interfaces[ioif].name, + device_id, + interfaces[ioif].owner); + return -EBUSY; + } + +- /* Check that all required groups are free before allocating, */ ++ /* Check that all required pins in the used groups are free ++ * before allocating. */ + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { +- if (grp->used) { +- if (grp->group == group_f) { +- if ((if_sync_serial_1 == ioif) || +- (if_sync_serial_3 == ioif)) { +- if ((grp->owner != if_sync_serial_1) && +- (grp->owner != if_sync_serial_3)) { +- local_irq_restore(flags); +- return -EBUSY; +- } +- } else if ((if_scsi8_0 == ioif) || +- (if_scsi8_1 == ioif)) { +- if ((grp->owner != if_scsi8_0) && +- (grp->owner != if_scsi8_1)) { +- local_irq_restore(flags); +- return -EBUSY; +- } +- } +- } else { +- local_irq_restore(flags); +- return -EBUSY; +- } ++ unsigned int if_group_use = 0; ++ ++ switch(grp->group) { ++ case group_a: ++ if_group_use = interfaces[ioif].group_a; ++ break; ++ case group_b: ++ if_group_use = interfaces[ioif].group_b; ++ break; ++ case group_c: ++ if_group_use = interfaces[ioif].group_c; ++ break; ++ case group_d: ++ if_group_use = interfaces[ioif].group_d; ++ break; ++ case group_e: ++ if_group_use = interfaces[ioif].group_e; ++ break; ++ case group_f: ++ if_group_use = interfaces[ioif].group_f; ++ break; ++ default: ++ BUG_ON(1); + } ++ ++ if(if_group_use & grp->used) { ++ local_irq_restore(flags); ++ printk(KERN_INFO "cris_request_io_interface: group %s needed by %s not available\n", grp->name, interfaces[ioif].name); ++ return -EBUSY; ++ } ++ + group_set = clear_group_from_set(group_set, grp); + } + +@@ -392,22 +665,16 @@ + if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) || + ((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) || + ((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) { +- printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n", +- ioif); ++ local_irq_restore(flags); ++ printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %s\n", ++ interfaces[ioif].name); + return -EBUSY; + } + +- /* All needed I/O pins and pin groups are free, allocate. */ +- group_set = interfaces[ioif].groups; +- while (NULL != (grp = get_group(group_set))) { +- grp->used = 1; +- grp->owner = ioif; +- group_set = clear_group_from_set(group_set, grp); +- } +- ++ /* Check which registers need to be reconfigured. */ + gens = genconfig_shadow; + gens_ii = gen_config_ii_shadow; +- ++ + set_gen_config = 1; + switch (ioif) + { +@@ -494,9 +761,43 @@ + set_gen_config = 0; + break; + default: +- panic("cris_request_io_interface: Bad interface %u submitted for %s\n", +- ioif, +- device_id); ++ local_irq_restore(flags); ++ printk(KERN_INFO "cris_request_io_interface: Bad interface %u submitted for %s\n", ++ ioif, ++ device_id); ++ return -EBUSY; ++ } ++ ++ /* All needed I/O pins and pin groups are free, allocate. */ ++ group_set = interfaces[ioif].groups; ++ while (NULL != (grp = get_group(group_set))) { ++ unsigned int if_group_use = 0; ++ ++ switch(grp->group) { ++ case group_a: ++ if_group_use = interfaces[ioif].group_a; ++ break; ++ case group_b: ++ if_group_use = interfaces[ioif].group_b; ++ break; ++ case group_c: ++ if_group_use = interfaces[ioif].group_c; ++ break; ++ case group_d: ++ if_group_use = interfaces[ioif].group_d; ++ break; ++ case group_e: ++ if_group_use = interfaces[ioif].group_e; ++ break; ++ case group_f: ++ if_group_use = interfaces[ioif].group_f; ++ break; ++ default: ++ BUG_ON(1); ++ } ++ grp->used |= if_group_use; ++ ++ group_set = clear_group_from_set(group_set, grp); + } + + interfaces[ioif].used = 1; +@@ -528,7 +829,7 @@ + + DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n", + gpio_in_pins, gpio_out_pins, gpio_pb_pins)); +- ++ + local_irq_restore(flags); + + notify_watchers(); +@@ -559,43 +860,36 @@ + } + group_set = interfaces[ioif].groups; + while (NULL != (grp = get_group(group_set))) { +- if (grp->group == group_f) { +- switch (ioif) +- { +- case if_sync_serial_1: +- if ((grp->owner == if_sync_serial_1) && +- interfaces[if_sync_serial_3].used) { +- grp->owner = if_sync_serial_3; +- } else +- grp->used = 0; +- break; +- case if_sync_serial_3: +- if ((grp->owner == if_sync_serial_3) && +- interfaces[if_sync_serial_1].used) { +- grp->owner = if_sync_serial_1; +- } else +- grp->used = 0; +- break; +- case if_scsi8_0: +- if ((grp->owner == if_scsi8_0) && +- interfaces[if_scsi8_1].used) { +- grp->owner = if_scsi8_1; +- } else +- grp->used = 0; +- break; +- case if_scsi8_1: +- if ((grp->owner == if_scsi8_1) && +- interfaces[if_scsi8_0].used) { +- grp->owner = if_scsi8_0; +- } else +- grp->used = 0; +- break; +- default: +- grp->used = 0; +- } +- } else { +- grp->used = 0; ++ unsigned int if_group_use = 0; ++ ++ switch(grp->group) { ++ case group_a: ++ if_group_use = interfaces[ioif].group_a; ++ break; ++ case group_b: ++ if_group_use = interfaces[ioif].group_b; ++ break; ++ case group_c: ++ if_group_use = interfaces[ioif].group_c; ++ break; ++ case group_d: ++ if_group_use = interfaces[ioif].group_d; ++ break; ++ case group_e: ++ if_group_use = interfaces[ioif].group_e; ++ break; ++ case group_f: ++ if_group_use = interfaces[ioif].group_f; ++ break; ++ default: ++ BUG_ON(1); + } ++ ++ if ((grp->used & if_group_use) != if_group_use) { ++ BUG_ON(1); ++ } ++ grp->used = grp->used & ~if_group_use; ++ + group_set = clear_group_from_set(group_set, grp); + } + interfaces[ioif].used = 0; +@@ -784,7 +1078,7 @@ + + for (i = start_bit; i <= stop_bit; i++) { + owners[i] = if_unclaimed; +- } ++ } + local_irq_restore(flags); + notify_watchers(); + +@@ -821,7 +1115,7 @@ + } + + void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available, +- const unsigned int gpio_out_available, ++ const unsigned int gpio_out_available, + const unsigned char pa_available, + const unsigned char pb_available)) + { +@@ -870,7 +1164,7 @@ + + module_init(cris_io_interface_init); + +- ++ + EXPORT_SYMBOL(cris_request_io_interface); + EXPORT_SYMBOL(cris_free_io_interface); + EXPORT_SYMBOL(cris_io_interface_allocate_pins); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/irq.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/irq.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/irq.c 2006-10-30 16:17:03.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: irq.c,v 1.4 2005/01/04 12:22:28 starvik Exp $ ++/* $Id: irq.c,v 1.9 2006/10/30 15:17:03 pkj Exp $ + * + * linux/arch/cris/kernel/irq.c + * +@@ -12,7 +12,9 @@ + */ + + #include <asm/irq.h> ++#include <asm/current.h> + #include <linux/irq.h> ++#include <linux/interrupt.h> + #include <linux/kernel.h> + #include <linux/init.h> + +@@ -75,8 +77,8 @@ + BUILD_IRQ(13, 0x2000) + void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */ + void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */ +-BUILD_IRQ(16, 0x10000) +-BUILD_IRQ(17, 0x20000) ++BUILD_IRQ(16, 0x10000 | 0x20000) /* ethernet tx interrupt needs to block rx */ ++BUILD_IRQ(17, 0x20000 | 0x10000) /* ...and vice versa */ + BUILD_IRQ(18, 0x40000) + BUILD_IRQ(19, 0x80000) + BUILD_IRQ(20, 0x100000) +@@ -147,6 +149,55 @@ + void do_sigtrap(void); /* from entry.S */ + void gdb_handle_breakpoint(void); /* from entry.S */ + ++extern void do_IRQ(int irq, struct pt_regs * regs); ++ ++/* Handle multiple IRQs */ ++void do_multiple_IRQ(struct pt_regs* regs) ++{ ++ int bit; ++ unsigned masked; ++ unsigned mask; ++ unsigned ethmask = 0; ++ ++ /* Get interrupts to mask and handle */ ++ mask = masked = *R_VECT_MASK_RD; ++ ++ /* Never mask timer IRQ */ ++ mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0)); ++ ++ /* ++ * If either ethernet interrupt (rx or tx) is active then block ++ * the other one too. Unblock afterwards also. ++ */ ++ if (mask & ++ (IO_STATE(R_VECT_MASK_RD, dma0, active) | ++ IO_STATE(R_VECT_MASK_RD, dma1, active))) { ++ ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) | ++ IO_MASK(R_VECT_MASK_RD, dma1)); ++ } ++ ++ /* Block them */ ++ *R_VECT_MASK_CLR = (mask | ethmask); ++ ++ /* An extra irq_enter here to prevent softIRQs to run after ++ * each do_IRQ. This will decrease the interrupt latency. ++ */ ++ irq_enter(); ++ ++ /* Handle all IRQs */ ++ for (bit = 2; bit < 32; bit++) { ++ if (masked & (1 << bit)) { ++ do_IRQ(bit, regs); ++ } ++ } ++ ++ /* This irq_exit() will trigger the soft IRQs. */ ++ irq_exit(); ++ ++ /* Unblock the IRQs again */ ++ *R_VECT_MASK_SET = (masked | ethmask); ++} ++ + /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and + setting the irq vector table. + */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/kgdb.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/kgdb.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/kgdb.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/kgdb.c 2006-03-22 10:56:55.000000000 +0100 +@@ -18,6 +18,10 @@ + *! Jul 21 1999 Bjorn Wesen eLinux port + *! + *! $Log: kgdb.c,v $ ++*! Revision 1.7 2006/03/22 09:56:55 starvik ++*! Merge of Linux 2.6.16 ++*! ++*! + *! Revision 1.6 2005/01/14 10:12:17 starvik + *! KGDB on separate port. + *! Console fixes from 2.4. +@@ -75,7 +79,7 @@ + *! + *!--------------------------------------------------------------------------- + *! +-*! $Id: kgdb.c,v 1.6 2005/01/14 10:12:17 starvik Exp $ ++*! $Id: kgdb.c,v 1.7 2006/03/22 09:56:55 starvik Exp $ + *! + *! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN + *! +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/process.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/process.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/process.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/process.c 2006-10-13 14:43:11.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: process.c,v 1.12 2004/12/27 11:18:32 starvik Exp $ ++/* $Id: process.c,v 1.14 2006/10/13 12:43:11 starvik Exp $ + * + * linux/arch/cris/kernel/process.c + * +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/ptrace.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/ptrace.c 2006-10-30 16:17:57.000000000 +0100 +@@ -66,6 +66,7 @@ + ptrace_disable(struct task_struct *child) + { + /* Todo - pending singlesteps? */ ++ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } + + /* +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/setup.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/setup.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/setup.c 2006-10-13 14:43:11.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* ++/* + * + * linux/arch/cris/arch-v10/kernel/setup.c + * +@@ -13,6 +13,7 @@ + #include <linux/seq_file.h> + #include <linux/proc_fs.h> + #include <linux/delay.h> ++#include <linux/param.h> + + #ifdef CONFIG_PROC_FS + #define HAS_FPU 0x0001 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/signal.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/signal.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/signal.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/signal.c 2006-03-22 10:56:55.000000000 +0100 +@@ -41,7 +41,7 @@ + */ + #define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2; + +-int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs); ++void do_signal(int canrestart, struct pt_regs *regs); + + /* + * Atomically swap in the new signal mask, and wait for a signal. Define +@@ -52,68 +52,16 @@ + sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, + long srp, struct pt_regs *regs) + { +- sigset_t saveset; +- + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); +- saveset = current->blocked; +- siginitset(¤t->blocked, mask); +- recalc_sigpending(); +- spin_unlock_irq(¤t->sighand->siglock); +- +- regs->r10 = -EINTR; +- while (1) { +- current->state = TASK_INTERRUPTIBLE; +- schedule(); +- if (do_signal(0, &saveset, regs)) +- /* We will get here twice: once to call the signal +- handler, then again to return from the +- sigsuspend system call. When calling the +- signal handler, R10 holds the signal number as +- set through do_signal. The sigsuspend call +- will return with the restored value set above; +- always -EINTR. */ +- return regs->r10; +- } +-} +- +-/* Define dummy arguments to be able to reach the regs argument. (Note that +- * this arrangement relies on size_t occupying one register.) +- */ +-int +-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, +- long mof, long srp, struct pt_regs *regs) +-{ +- sigset_t saveset, newset; +- +- /* XXX: Don't preclude handling different sized sigset_t's. */ +- if (sigsetsize != sizeof(sigset_t)) +- return -EINVAL; +- +- if (copy_from_user(&newset, unewset, sizeof(newset))) +- return -EFAULT; +- sigdelsetmask(&newset, ~_BLOCKABLE); +- +- spin_lock_irq(¤t->sighand->siglock); +- saveset = current->blocked; +- current->blocked = newset; ++ current->saved_sigmask = current->blocked; ++ siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +- +- regs->r10 = -EINTR; +- while (1) { +- current->state = TASK_INTERRUPTIBLE; +- schedule(); +- if (do_signal(0, &saveset, regs)) +- /* We will get here twice: once to call the signal +- handler, then again to return from the +- sigsuspend system call. When calling the +- signal handler, R10 holds the signal number as +- set through do_signal. The sigsuspend call +- will return with the restored value set above; +- always -EINTR. */ +- return regs->r10; +- } ++ current->state = TASK_INTERRUPTIBLE; ++ schedule(); ++ set_thread_flag(TIF_RESTORE_SIGMASK); ++ return -ERESTARTNOHAND; + } + + int +@@ -353,8 +301,8 @@ + * user-mode trampoline. + */ + +-static void setup_frame(int sig, struct k_sigaction *ka, +- sigset_t *set, struct pt_regs * regs) ++static int setup_frame(int sig, struct k_sigaction *ka, ++ sigset_t *set, struct pt_regs * regs) + { + struct sigframe __user *frame; + unsigned long return_ip; +@@ -402,14 +350,15 @@ + + wrusp((unsigned long)frame); + +- return; ++ return 0; + + give_sigsegv: + force_sigsegv(sig, current); ++ return -EFAULT; + } + +-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, +- sigset_t *set, struct pt_regs * regs) ++static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, ++ sigset_t *set, struct pt_regs * regs) + { + struct rt_sigframe __user *frame; + unsigned long return_ip; +@@ -466,21 +415,24 @@ + + wrusp((unsigned long)frame); + +- return; ++ return 0; + + give_sigsegv: + force_sigsegv(sig, current); ++ return -EFAULT; + } + + /* + * OK, we're invoking a handler + */ + +-static inline void ++static inline int + handle_signal(int canrestart, unsigned long sig, + siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) + { ++ int ret; ++ + /* Are we from a system call? */ + if (canrestart) { + /* If so, check system call restarting.. */ +@@ -510,19 +462,20 @@ + + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) +- setup_rt_frame(sig, ka, info, oldset, regs); ++ ret = setup_rt_frame(sig, ka, info, oldset, regs); + else +- setup_frame(sig, ka, oldset, regs); ++ ret = setup_frame(sig, ka, oldset, regs); + +- if (ka->sa.sa_flags & SA_ONESHOT) +- ka->sa.sa_handler = SIG_DFL; ++ if (ret == 0) { ++ spin_lock_irq(¤t->sighand->siglock); ++ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); ++ if (!(ka->sa.sa_flags & SA_NODEFER)) ++ sigaddset(¤t->blocked,sig); ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++ } + +- spin_lock_irq(¤t->sighand->siglock); +- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); +- if (!(ka->sa.sa_flags & SA_NODEFER)) +- sigaddset(¤t->blocked,sig); +- recalc_sigpending(); +- spin_unlock_irq(¤t->sighand->siglock); ++ return ret; + } + + /* +@@ -537,12 +490,13 @@ + * mode below. + */ + +-int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) ++void do_signal(int canrestart, struct pt_regs *regs) + { + siginfo_t info; + int signr; + struct k_sigaction ka; +- ++ sigset_t *oldset; ++ + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from +@@ -550,16 +504,26 @@ + * if so. + */ + if (!user_mode(regs)) +- return 1; ++ return; + +- if (!oldset) ++ if (test_thread_flag(TIF_RESTORE_SIGMASK)) ++ oldset = ¤t->saved_sigmask; ++ else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); + if (signr > 0) { + /* Whee! Actually deliver the signal. */ +- handle_signal(canrestart, signr, &info, &ka, oldset, regs); +- return 1; ++ if (handle_signal(canrestart, signr, &info, &ka, oldset, regs)) { ++ /* a signal was successfully delivered; the saved ++ * sigmask will have been stored in the signal frame, ++ * and will be restored by sigreturn, so we can simply ++ * clear the TIF_RESTORE_SIGMASK flag */ ++ if (test_thread_flag(TIF_RESTORE_SIGMASK)) ++ clear_thread_flag(TIF_RESTORE_SIGMASK); ++ } ++ ++ return; + } + + /* Did we come from a system call? */ +@@ -575,5 +539,11 @@ + regs->irp -= 2; + } + } +- return 0; ++ ++ /* if there's no signal to deliver, we just put the saved sigmask ++ * back */ ++ if (test_thread_flag(TIF_RESTORE_SIGMASK)) { ++ clear_thread_flag(TIF_RESTORE_SIGMASK); ++ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); ++ } + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/time.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/time.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/time.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/time.c 2007-01-09 10:29:18.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $ ++/* $Id: time.c,v 1.10 2007/01/09 09:29:18 starvik Exp $ + * + * linux/arch/cris/arch-v10/kernel/time.c + * +@@ -20,6 +20,7 @@ + #include <asm/io.h> + #include <asm/delay.h> + #include <asm/rtc.h> ++#include <asm/irq_regs.h> + + /* define this if you need to use print_timestamp */ + /* it will make jiffies at 96 hz instead of 100 hz though */ +@@ -202,8 +203,9 @@ + extern void cris_do_profile(struct pt_regs *regs); + + static inline irqreturn_t +-timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++timer_interrupt(int irq, void *dev_id) + { ++ struct pt_regs* regs = get_irq_regs(); + /* acknowledge the timer irq */ + + #ifdef USE_CASCADE_TIMERS +@@ -222,9 +224,11 @@ + #endif + + /* reset watchdog otherwise it resets us! */ +- + reset_watchdog(); + ++ /* Update statistics. */ ++ update_process_times(user_mode(regs)); ++ + /* call the real timer interrupt handler */ + + do_timer(1); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/traps.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/traps.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/traps.c 2006-12-11 14:04:24.000000000 +0100 +@@ -1,13 +1,10 @@ +-/* $Id: traps.c,v 1.4 2005/04/24 18:47:55 starvik Exp $ ++/* ++ * Helper functions for trap handlers + * +- * linux/arch/cris/arch-v10/traps.c ++ * Copyright (C) 2000-2006, Axis Communications AB. + * +- * Heler functions for trap handlers +- * +- * Copyright (C) 2000-2002 Axis Communications AB +- * +- * Authors: Bjorn Wesen +- * Hans-Peter Nilsson ++ * Authors: Bjorn Wesen ++ * Hans-Peter Nilsson + * + */ + +@@ -15,124 +12,118 @@ + #include <asm/uaccess.h> + #include <asm/arch/sv_addr_ag.h> + +-extern int raw_printk(const char *fmt, ...); +- +-void +-show_registers(struct pt_regs * regs) ++void ++show_registers(struct pt_regs *regs) + { +- /* We either use rdusp() - the USP register, which might not +- correspond to the current process for all cases we're called, +- or we use the current->thread.usp, which is not up to date for +- the current process. Experience shows we want the USP +- register. */ ++ /* ++ * It's possible to use either the USP register or current->thread.usp. ++ * USP might not correspond to the current process for all cases this ++ * function is called, and current->thread.usp isn't up to date for the ++ * current process. Experience shows that using USP is the way to go. ++ */ + unsigned long usp = rdusp(); + +- raw_printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", +- regs->irp, regs->srp, regs->dccr, usp, regs->mof ); +- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", ++ printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n", ++ regs->irp, regs->srp, regs->dccr, usp, regs->mof); ++ ++ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); +- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", ++ ++ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); +- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", ++ ++ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); +- raw_printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", +- regs->r12, regs->r13, regs->orig_r10, regs); +- raw_printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); +- raw_printk("Process %s (pid: %d, stackpage=%08lx)\n", ++ ++ printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n", ++ regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs); ++ ++ printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE); ++ ++ printk("Process %s (pid: %d, stackpage=%08lx)\n", + current->comm, current->pid, (unsigned long)current); + + /* +- * When in-kernel, we also print out the stack and code at the +- * time of the fault.. +- */ +- if (! user_mode(regs)) { +- int i; ++ * When in-kernel, we also print out the stack and code at the ++ * time of the fault.. ++ */ ++ if (!user_mode(regs)) { ++ int i; + +- show_stack(NULL, (unsigned long*)usp); ++ show_stack(NULL, (unsigned long *)usp); + +- /* Dump kernel stack if the previous dump wasn't one. */ ++ /* ++ * If the previous stack-dump wasn't a kernel one, dump the ++ * kernel stack now. ++ */ + if (usp != 0) +- show_stack (NULL, NULL); ++ show_stack(NULL, NULL); + +- raw_printk("\nCode: "); +- if(regs->irp < PAGE_OFFSET) +- goto bad; +- +- /* Often enough the value at regs->irp does not point to +- the interesting instruction, which is most often the +- _previous_ instruction. So we dump at an offset large +- enough that instruction decoding should be in sync at +- the interesting point, but small enough to fit on a row +- (sort of). We point out the regs->irp location in a +- ksymoops-friendly way by wrapping the byte for that +- address in parentheses. */ +- for(i = -12; i < 12; i++) +- { +- unsigned char c; +- if(__get_user(c, &((unsigned char*)regs->irp)[i])) { +-bad: +- raw_printk(" Bad IP value."); +- break; +- } ++ printk("\nCode: "); ++ ++ if (regs->irp < PAGE_OFFSET) ++ goto bad_value; ++ ++ /* ++ * Quite often the value at regs->irp doesn't point to the ++ * interesting instruction, which often is the previous ++ * instruction. So dump at an offset large enough that the ++ * instruction decoding should be in sync at the interesting ++ * point, but small enough to fit on a row. The regs->irp ++ * location is pointed out in a ksymoops-friendly way by ++ * wrapping the byte for that address in parenthesises. ++ */ ++ for (i = -12; i < 12; i++) { ++ unsigned char c; ++ ++ if (__get_user(c, &((unsigned char *)regs->irp)[i])) { ++bad_value: ++ printk(" Bad IP value."); ++ break; ++ } + + if (i == 0) +- raw_printk("(%02x) ", c); ++ printk("(%02x) ", c); + else +- raw_printk("%02x ", c); +- } +- raw_printk("\n"); +- } ++ printk("%02x ", c); ++ } ++ printk("\n"); ++ } + } + +-/* Called from entry.S when the watchdog has bitten +- * We print out something resembling an oops dump, and if +- * we have the nice doggy development flag set, we halt here +- * instead of rebooting. +- */ +- +-extern void reset_watchdog(void); +-extern void stop_watchdog(void); +- +- + void +-watchdog_bite_hook(struct pt_regs *regs) ++arch_enable_nmi(void) + { +-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY +- local_irq_disable(); +- stop_watchdog(); +- show_registers(regs); +- while(1) /* nothing */; +-#else +- show_registers(regs); +-#endif ++ asm volatile ("setf m"); + } + +-/* This is normally the 'Oops' routine */ +-void +-die_if_kernel(const char * str, struct pt_regs * regs, long err) ++extern void (*nmi_handler)(struct pt_regs*); ++void handle_nmi(struct pt_regs* regs) + { +- if(user_mode(regs)) +- return; +- +-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY +- /* This printout might take too long and trigger the +- * watchdog normally. If we're in the nice doggy +- * development mode, stop the watchdog during printout. +- */ +- stop_watchdog(); +-#endif +- +- raw_printk("%s: %04lx\n", str, err & 0xffff); +- +- show_registers(regs); ++ if (nmi_handler) ++ nmi_handler(regs); + +-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY +- reset_watchdog(); +-#endif +- do_exit(SIGSEGV); ++ /* Wait until nmi is no longer active. (We enable NMI immediately after ++ returning from this function, and we don't want it happening while ++ exiting from the NMI interrupt handler.) */ ++ while(*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active)); + } + +-void arch_enable_nmi(void) ++#ifdef CONFIG_DEBUG_BUGVERBOSE ++void ++handle_BUG(struct pt_regs *regs) + { +- asm volatile("setf m"); ++ struct bug_frame f; ++ unsigned char c; ++ unsigned long irp = regs->irp; ++ ++ if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f)) ++ return; ++ if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC) ++ return; ++ if (__get_user(c, f.filename)) ++ f.filename = "<bad filename>"; ++ ++ printk("kernel BUG at %s:%d!\n", f.filename, f.line); + } ++#endif +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksum.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksum.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksum.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksum.S 2005-08-16 12:38:52.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: checksum.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++/* $Id: checksum.S,v 1.2 2005/08/16 10:38:52 edgar Exp $ + * A fast checksum routine using movem + * Copyright (c) 1998-2001 Axis Communications AB + * +@@ -61,8 +61,6 @@ + + ax + addq 0,$r12 +- ax ; do it again, since we might have generated a carry +- addq 0,$r12 + + subq 10*4,$r11 + bge _mloop +@@ -88,10 +86,6 @@ + lsrq 16,$r13 ; r13 = checksum >> 16 + and.d $r9,$r12 ; checksum = checksum & 0xffff + add.d $r13,$r12 ; checksum += r13 +- move.d $r12,$r13 ; do the same again, maybe we got a carry last add +- lsrq 16,$r13 +- and.d $r9,$r12 +- add.d $r13,$r12 + + _no_fold: + cmpq 2,$r11 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksumcopy.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksumcopy.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksumcopy.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksumcopy.S 2005-08-16 12:38:52.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: checksumcopy.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++/* $Id: checksumcopy.S,v 1.2 2005/08/16 10:38:52 edgar Exp $ + * A fast checksum+copy routine using movem + * Copyright (c) 1998, 2001 Axis Communications AB + * +@@ -67,8 +67,6 @@ + + ax + addq 0,$r13 +- ax ; do it again, since we might have generated a carry +- addq 0,$r13 + + subq 10*4,$r12 + bge _mloop +@@ -91,10 +89,6 @@ + lsrq 16,$r9 ; r0 = checksum >> 16 + and.d 0xffff,$r13 ; checksum = checksum & 0xffff + add.d $r9,$r13 ; checksum += r0 +- move.d $r13,$r9 ; do the same again, maybe we got a carry last add +- lsrq 16,$r9 +- and.d 0xffff,$r13 +- add.d $r9,$r13 + + _no_fold: + cmpq 2,$r12 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/dram_init.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/dram_init.S +--- linux-2.6.19.2.old/arch/cris/arch-v10/lib/dram_init.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/dram_init.S 2006-10-13 14:43:11.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: dram_init.S,v 1.4 2003/09/22 09:21:59 starvik Exp $ ++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ + * + * DRAM/SDRAM initialization - alter with care + * This file is intended to be included from other assembler files +@@ -11,6 +11,9 @@ + * Authors: Mikael Starvik (starvik@axis.com) + * + * $Log: dram_init.S,v $ ++ * Revision 1.5 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * + * Revision 1.4 2003/09/22 09:21:59 starvik + * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx + * so we need to mask off 12 bits. +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/mm/fault.c linux-2.6.19.2.dev/arch/cris/arch-v10/mm/fault.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/mm/fault.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/mm/fault.c 2006-12-11 12:32:10.000000000 +0100 +@@ -73,7 +73,7 @@ + /* leave it to the MM system fault handler */ + if (miss) + do_page_fault(address, regs, 0, writeac); +- else ++ else + do_page_fault(address, regs, 1, we); + + /* Reload TLB with new entry to avoid an extra miss exception. +@@ -84,12 +84,13 @@ + local_irq_disable(); + pmd = (pmd_t *)(pgd + pgd_index(address)); + if (pmd_none(*pmd)) +- return; ++ goto exit; + pte = *pte_offset_kernel(pmd, address); + if (!pte_present(pte)) +- return; ++ goto exit; + *R_TLB_SELECT = select; + *R_TLB_HI = cause; + *R_TLB_LO = pte_val(pte); ++exit: + local_irq_restore(flags); + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/mm/tlb.c linux-2.6.19.2.dev/arch/cris/arch-v10/mm/tlb.c +--- linux-2.6.19.2.old/arch/cris/arch-v10/mm/tlb.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v10/mm/tlb.c 2006-08-07 12:08:35.000000000 +0200 +@@ -179,23 +179,26 @@ + switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) + { +- /* make sure we have a context */ ++ if (prev != next) { ++ /* make sure we have a context */ ++ get_mmu_context(next); ++ ++ /* remember the pgd for the fault handlers ++ * this is similar to the pgd register in some other CPU's. ++ * we need our own copy of it because current and active_mm ++ * might be invalid at points where we still need to derefer ++ * the pgd. ++ */ + +- get_mmu_context(next); ++ per_cpu(current_pgd, smp_processor_id()) = next->pgd; + +- /* remember the pgd for the fault handlers +- * this is similar to the pgd register in some other CPU's. +- * we need our own copy of it because current and active_mm +- * might be invalid at points where we still need to derefer +- * the pgd. +- */ +- +- per_cpu(current_pgd, smp_processor_id()) = next->pgd; +- +- /* switch context in the MMU */ ++ /* switch context in the MMU */ + +- D(printk("switching mmu_context to %d (%p)\n", next->context, next)); ++ D(printk("switching mmu_context to %d (%p)\n", ++ next->context, next)); + +- *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, page_id, next->context.page_id); ++ *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, ++ page_id, next->context.page_id); ++ } + } + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v32/Kconfig +--- linux-2.6.19.2.old/arch/cris/arch-v32/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/Kconfig 2007-01-09 10:29:18.000000000 +0100 +@@ -1,23 +1,66 @@ ++source drivers/cpufreq/Kconfig ++ + config ETRAX_DRAM_VIRTUAL_BASE + hex + depends on ETRAX_ARCH_V32 + default "c0000000" + +-config ETRAX_LED1G +- string "First green LED bit" ++choice ++ prompt "Nbr of Ethernet LED groups" + depends on ETRAX_ARCH_V32 ++ default ETRAX_NBR_LED_GRP_ONE ++ help ++ Select how many Ethernet LED groups that can be used. Usually one per Ethernet ++ interface is a good choice. ++ ++config ETRAX_NBR_LED_GRP_ZERO ++ bool "Use zero LED groups" ++ help ++ Select this if you do not want any Ethernet LEDs. ++ ++config ETRAX_NBR_LED_GRP_ONE ++ bool "Use one LED group" ++ help ++ Select this if you want one Ethernet LED group. This LED group can be used for ++ one or more Ethernet interfaces. However, it is recomended that each Ethernet ++ interface use a dedicated LED group. ++ ++config ETRAX_NBR_LED_GRP_TWO ++ bool "Use two LED groups" ++ help ++ Select this if you want two Ethernet LED groups. This is the best choice if you ++ have more than one Ethernet interface and would like to have separate LEDs for ++ the interfaces. ++ ++endchoice ++ ++config ETRAX_LED_G_NET0 ++ string "Ethernet LED group 0 green LED bit" ++ depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) + default "PA3" + help +- Bit to use for the first green LED (network LED). +- Most Axis products use bit A3 here. ++ Bit to use for the green LED in Ethernet LED group 0. + +-config ETRAX_LED1R +- string "First red LED bit" +- depends on ETRAX_ARCH_V32 ++config ETRAX_LED_R_NET0 ++ string "Ethernet LED group 0 red LED bit" ++ depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO) + default "PA4" + help +- Bit to use for the first red LED (network LED). +- Most Axis products use bit A4 here. ++ Bit to use for the red LED in Ethernet LED group 0. ++ ++config ETRAX_LED_G_NET1 ++ string "Ethernet group 1 green LED bit" ++ depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO ++ default "" ++ help ++ Bit to use for the green LED in Ethernet LED group 1. ++ ++config ETRAX_LED_R_NET1 ++ string "Ethernet group 1 red LED bit" ++ depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO ++ default "" ++ help ++ Bit to use for the red LED in Ethernet LED group 1. + + config ETRAX_LED2G + string "Second green LED bit" +@@ -294,3 +337,22 @@ + help + Configures the initial data for the general port E bits. Most + products should use 00000 here. ++ ++config ETRAX_DEF_GIO_PV_OE ++ hex "GIO_PV_OE" ++ depends on ETRAX_VIRTUAL_GPIO ++ default "0000" ++ help ++ Configures the direction of virtual general port V bits. 1 is out, ++ 0 is in. This is often totally different depending on the product ++ used. These bits are used for all kinds of stuff. If you don't know ++ what to use, it is always safe to put all as inputs, although ++ floating inputs isn't good. ++ ++config ETRAX_DEF_GIO_PV_OUT ++ hex "GIO_PV_OUT" ++ depends on ETRAX_VIRTUAL_GPIO ++ default "0000" ++ help ++ Configures the initial data for the virtual general port V bits. ++ Most products should use 0000 here. +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/Makefile 2006-11-29 17:05:41.000000000 +0100 +@@ -1,14 +1,21 @@ + # + # arch/cris/arch-v32/boot/Makefile + # +-target = $(target_boot_dir) +-src = $(src_boot_dir) + +-zImage: compressed/vmlinuz ++OBJCOPY = objcopy-cris ++OBJCOPYFLAGS = -O binary -R .note -R .comment + +-compressed/vmlinuz: $(objtree)/vmlinux +- @$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz ++subdir- := compressed rescue ++targets := Image + +-clean: +- rm -f zImage tools/build compressed/vmlinux.out +- @$(MAKE) -f $(src)/compressed/Makefile clean ++$(obj)/Image: vmlinux FORCE ++ $(call if_changed,objcopy) ++ @echo ' Kernel: $@ is ready' ++ ++$(obj)/compressed/vmlinux: $(obj)/Image FORCE ++ $(Q)$(MAKE) $(build)=$(obj)/compressed $@ ++ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin ++ ++$(obj)/zImage: $(obj)/compressed/vmlinux ++ @cp $< $@ ++ @echo ' Kernel: $@ is ready' +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/Makefile 2006-11-29 17:05:42.000000000 +0100 +@@ -1,41 +1,29 @@ + # +-# lx25/arch/cris/arch-v32/boot/compressed/Makefile ++# arch/cris/arch-v32/boot/compressed/Makefile + # +-# create a compressed vmlinux image from the original vmlinux files and romfs +-# +- +-target = $(target_compressed_dir) +-src = $(src_compressed_dir) + + CC = gcc-cris -mlinux -march=v32 -I $(TOPDIR)/include + CFLAGS = -O2 + LD = gcc-cris -mlinux -march=v32 -nostdlib ++LDFLAGS = -T $(obj)/decompress.ld ++obj-y = head.o misc.o ++OBJECTS = $(obj)/head.o $(obj)/misc.o + OBJCOPY = objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss +-OBJECTS = $(target)/head.o $(target)/misc.o +- +-# files to compress +-SYSTEM = $(objtree)/vmlinux.bin +- +-all: vmlinuz +- +-$(target)/decompress.bin: $(OBJECTS) +- $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS) +- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin + +-$(objtree)/vmlinuz: $(target) piggy.img $(target)/decompress.bin +- cat $(target)/decompress.bin piggy.img > $(objtree)/vmlinuz +- rm -f piggy.img +- cp $(objtree)/vmlinuz $(src) ++quiet_cmd_image = BUILD $@ ++cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@ + +-$(target)/head.o: $(src)/head.S +- $(CC) -D__ASSEMBLY__ -c $< -o $@ ++targets := vmlinux piggy.gz decompress.o decompress.bin + +-# gzip the kernel image ++$(obj)/decompress.o: $(OBJECTS) FORCE ++ $(call if_changed,ld) + +-piggy.img: $(SYSTEM) +- cat $(SYSTEM) | gzip -f -9 > piggy.img ++$(obj)/decompress.bin: $(obj)/decompress.o FORCE ++ $(call if_changed,objcopy) + +-clean: +- rm -f piggy.img $(objtree)/vmlinuz vmlinuz.o decompress.o decompress.bin $(OBJECTS) ++$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE ++ $(call if_changed,image) + ++$(obj)/piggy.gz: $(obj)/../Image FORCE ++ $(call if_changed,gzip) +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/README linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/README +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/README 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/README 2003-08-21 11:37:03.000000000 +0200 +@@ -5,14 +5,14 @@ + This can be slightly confusing because it's a process with many steps. + + The kernel object built by the arch/etrax100/Makefile, vmlinux, is split +-by that makefile into text and data binary files, vmlinux.text and ++by that makefile into text and data binary files, vmlinux.text and + vmlinux.data. + + Those files together with a ROM filesystem can be catted together and + burned into a flash or executed directly at the DRAM origin. + + They can also be catted together and compressed with gzip, which is what +-happens in this makefile. Together they make up piggy.img. ++happens in this makefile. Together they make up piggy.img. + + The decompressor is built into the file decompress.o. It is turned into + the binary file decompress.bin, which is catted together with piggy.img +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/decompress.ld linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/decompress.ld +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/decompress.ld 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/decompress.ld 2003-08-21 11:57:56.000000000 +0200 +@@ -1,7 +1,7 @@ + /*#OUTPUT_FORMAT(elf32-us-cris) */ + OUTPUT_ARCH (crisv32) + +-MEMORY ++MEMORY + { + dram : ORIGIN = 0x40700000, + LENGTH = 0x00100000 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/head.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/head.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/head.S 2007-01-09 10:29:20.000000000 +0100 +@@ -2,19 +2,19 @@ + * Code that sets up the DRAM registers, calls the + * decompressor to unpack the piggybacked kernel, and jumps. + * +- * Copyright (C) 1999 - 2003, Axis Communications AB ++ * Copyright (C) 1999 - 2006, Axis Communications AB + */ + + #define ASSEMBLER_MACROS_ONLY + #include <asm/arch/hwregs/asm/reg_map_asm.h> + #include <asm/arch/hwregs/asm/gio_defs_asm.h> + #include <asm/arch/hwregs/asm/config_defs_asm.h> +- ++ + #define RAM_INIT_MAGIC 0x56902387 + #define COMMAND_LINE_MAGIC 0x87109563 + + ;; Exported symbols +- ++ + .globl input_data + + .text +@@ -29,53 +29,16 @@ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + +- ;; If booting from NAND flash we first have to copy some +- ;; data from NAND flash to internal RAM to get the code +- ;; that initializes the SDRAM. Lets copy 20 KB. This +- ;; code executes at 0x38010000 if booting from NAND and +- ;; we are guaranted that at least 0x200 bytes are good so +- ;; lets start from there. The first 8192 bytes in the nand +- ;; flash is spliced with zeroes and is thus 16384 bytes. +- move.d 0x38010200, $r10 +- move.d 0x14200, $r11 ; Start offset in NAND flash 0x10200 + 16384 +- move.d 0x5000, $r12 ; Length of copy +- +- ;; Before this code the tools add a partitiontable so the PC +- ;; has an offset from the linked address. +-offset1: +- lapcq ., $r13 ; get PC +- add.d first_copy_complete-offset1, $r13 +- +-#include "../../lib/nand_init.S" +- +-first_copy_complete: +- ;; Initialze the DRAM registers. ++ ;; Initialize the DRAM registers. + cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? + beq dram_init_finished + nop + + #include "../../lib/dram_init.S" +- ++ + dram_init_finished: +- lapcq ., $r13 ; get PC +- add.d second_copy_complete-dram_init_finished, $r13 +- +- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 +- move.d [$r0], $r0 +- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 +- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 +- bne second_copy_complete ; No NAND boot +- nop +- +- ;; Copy 2MB from NAND flash to SDRAM (at 2-4MB into the SDRAM) +- move.d 0x40204000, $r10 +- move.d 0x8000, $r11 +- move.d 0x200000, $r12 +- ba copy_nand_to_ram +- nop +-second_copy_complete: +- +- ;; Initiate the PA port. ++ ++ ;; Initiate the GIO ports. + move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1 + move.d $r0, [$r1] +@@ -84,57 +47,74 @@ + move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1 + move.d $r0, [$r1] + ++ move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PD_OUT, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pd_dout), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PD_OE, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pd_oe), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PE_OUT, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pe_dout), $r1 ++ move.d $r0, [$r1] ++ ++ move.d CONFIG_ETRAX_DEF_GIO_PE_OE, $r0 ++ move.d REG_ADDR(gio, regi_gio, rw_pe_oe), $r1 ++ move.d $r0, [$r1] ++ + ;; Setup the stack to a suitably high address. +- ;; We assume 8 MB is the minimum DRAM and put ++ ;; We assume 8 MB is the minimum DRAM and put + ;; the SP at the top for now. + + move.d 0x40800000, $sp + +- ;; Figure out where the compressed piggyback image is +- ;; in the flash (since we wont try to copy it to DRAM +- ;; before unpacking). It is at _edata, but in flash. ++ ;; Figure out where the compressed piggyback image is. ++ ;; It is either in [NOR] flash (we don't want to copy it ++ ;; to DRAM before unpacking), or copied to DRAM ++ ;; by the [NAND] flash boot loader. ++ ;; The piggyback image is at _edata, but relative to where the ++ ;; image is actually located in memory, not where it is linked ++ ;; (the decompressor is linked at 0x40700000+ and runs there). + ;; Use (_edata - herami) as offset to the current PC. + +- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 +- move.d [$r0], $r0 +- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 +- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 +- beq hereami2 +- nop +-hereami: ++hereami: + lapcq ., $r5 ; get PC + and.d 0x7fffffff, $r5 ; strip any non-cache bit +- move.d $r5, $r0 ; save for later - flash address of 'herami' ++ move.d $r5, $r0 ; source address of 'herami' + add.d _edata, $r5 + sub.d hereami, $r5 ; r5 = flash address of '_edata' + move.d hereami, $r1 ; destination +- ba 2f +- nop +-hereami2: +- lapcq ., $r5 ; get PC +- and.d 0x00ffffff, $r5 ; strip any non-cache bit +- move.d $r5, $r6 +- or.d 0x40200000, $r6 +- move.d $r6, $r0 ; save for later - flash address of 'herami' +- add.d _edata, $r5 +- sub.d hereami2, $r5 ; r5 = flash address of '_edata' +- add.d 0x40200000, $r5 +- move.d hereami2, $r1 ; destination +-2: +- ;; Copy text+data to DRAM + ++ ;; Copy text+data to DRAM ++ + move.d _edata, $r2 ; end destination +-1: move.w [$r0+], $r3 +- move.w $r3, [$r1+] +- cmp.d $r2, $r1 ++1: move.w [$r0+], $r3 ; from herami+ source ++ move.w $r3, [$r1+] ; to hereami+ destination (linked address) ++ cmp.d $r2, $r1 ; finish when destination == _edata + bcs 1b + nop +- +- move.d input_data, $r0 ; for the decompressor ++ move.d input_data, $r0 ; for the decompressor + move.d $r5, [$r0] ; for the decompressor + + ;; Clear the decompressors BSS (between _edata and _end) +- ++ + moveq 0, $r0 + move.d _edata, $r1 + move.d _end, $r2 +@@ -144,40 +124,47 @@ + nop + + ;; Save command line magic and address. +- move.d _cmd_line_magic, $r12 +- move.d $r10, [$r12] +- move.d _cmd_line_addr, $r12 +- move.d $r11, [$r12] +- ++ move.d _cmd_line_magic, $r0 ++ move.d $r10, [$r0] ++ move.d _cmd_line_addr, $r0 ++ move.d $r11, [$r0] ++ ++ ;; Save boot source indicator ++ move.d _boot_source, $r0 ++ move.d $r12, [$r0] ++ + ;; Do the decompression and save compressed size in _inptr + + jsr decompress_kernel + nop + ++ ;; Restore boot source indicator ++ move.d _boot_source, $r12 ++ move.d [$r12], $r12 ++ + ;; Restore command line magic and address. + move.d _cmd_line_magic, $r10 + move.d [$r10], $r10 + move.d _cmd_line_addr, $r11 + move.d [$r11], $r11 +- ++ + ;; Put start address of root partition in r9 so the kernel can use it + ;; when mounting from flash + move.d input_data, $r0 + move.d [$r0], $r9 ; flash address of compressed kernel + move.d inptr, $r0 + add.d [$r0], $r9 ; size of compressed kernel +- cmp.d 0x40200000, $r9 +- blo enter_kernel +- nop +- sub.d 0x40200000, $r9 +- add.d 0x4000, $r9 +- +-enter_kernel: ++ cmp.d 0x40000000, $r9 ; image in DRAM ? ++ blo enter_kernel ; no, must be [NOR] flash, jump ++ nop ; delay slot ++ and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M ++ ++enter_kernel: + ;; Enter the decompressed kernel + move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized + jump 0x40004000 ; kernel is linked to this address + nop +- ++ + .data + + input_data: +@@ -185,8 +172,8 @@ + _cmd_line_magic: + .dword 0 + _cmd_line_addr: ++ .dword 0 ++_boot_source: + .dword 0 +-is_nand_boot: +- .dword 0 +- ++ + #include "../../lib/hw_settings.S" +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/misc.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/misc.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/misc.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/misc.c 2006-11-03 11:35:51.000000000 +0100 +@@ -1,15 +1,15 @@ + /* + * misc.c + * +- * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $ +- * +- * This is a collection of several routines from gzip-1.0.3 ++ * $Id: misc.c,v 1.12 2006/11/03 10:35:51 pkj Exp $ ++ * ++ * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * puts by Nick Holloway 1993, better puts by Martin Mares 1995 + * adoptation for Linux/CRIS Axis Communications AB, 1999 +- * ++ * + */ + + /* where the piggybacked kernel image expects itself to live. +@@ -20,11 +20,11 @@ + + #define KERNEL_LOAD_ADR 0x40004000 + +- + #include <linux/types.h> + #include <asm/arch/hwregs/reg_rdwr.h> + #include <asm/arch/hwregs/reg_map.h> + #include <asm/arch/hwregs/ser_defs.h> ++#include <asm/arch/hwregs/pinmux_defs.h> + + /* + * gzip declarations +@@ -66,8 +66,8 @@ + #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ + #define RESERVED 0xC0 /* bit 6,7: reserved */ + +-#define get_byte() inbuf[inptr++] +- ++#define get_byte() inbuf[inptr++] ++ + /* Diagnostic functions */ + #ifdef DEBUG + # define Assert(cond,msg) {if(!(cond)) error(msg);} +@@ -96,20 +96,20 @@ + static long bytes_out = 0; + static uch *output_data; + static unsigned long output_ptr = 0; +- ++ + static void *malloc(int size); + static void free(void *where); + static void error(char *m); + static void gzip_mark(void **); + static void gzip_release(void **); +- ++ + static void puts(const char *); + + /* the "heap" is put directly after the BSS ends, at end */ +- ++ + extern int _end; + static long free_mem_ptr = (long)&_end; +- ++ + #include "../../../../../lib/inflate.c" + + static void *malloc(int size) +@@ -152,7 +152,7 @@ + rs = REG_RD(ser, regi_ser, rs_stat_din); + } + while (!rs.tr_rdy);/* Wait for tranceiver. */ +- ++ + REG_WR(ser, regi_ser, rw_dout, dout); + } + +@@ -209,9 +209,9 @@ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; +- ++ + in = window; +- out = &output_data[output_ptr]; ++ out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); +@@ -225,9 +225,9 @@ + static void + error(char *x) + { +- puts("\n\n"); ++ puts("\r\n\n"); + puts(x); +- puts("\n\n -- System halted\n"); ++ puts("\r\n\n -- System halted\n"); + + while(1); /* Halt */ + } +@@ -246,13 +246,13 @@ + reg_ser_rw_rec_ctrl rec_ctrl; + reg_ser_rw_tr_baud_div tr_baud; + reg_ser_rw_rec_baud_div rec_baud; +- ++ + /* Turn off XOFF. */ + xoff = REG_RD(ser, regi_ser, rw_xoff); +- ++ + xoff.chr = 0; + xoff.automatic = regk_ser_no; +- ++ + REG_WR(ser, regi_ser, rw_xoff, xoff); + + /* Set baudrate and stopbits. */ +@@ -260,19 +260,21 @@ + rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); + tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div); + rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); +- ++ + tr_ctrl.stop_bits = 1; /* 2 stop bits. */ +- +- /* +- * The baudrate setup is a bit fishy, but in the end the tranceiver is +- * set to 4800 and the receiver to 115200. The magic value is +- * 29.493 MHz. ++ tr_ctrl.en = 1; /* enable transmitter */ ++ rec_ctrl.en = 1; /* enabler receiver */ ++ ++ /* ++ * The baudrate setup used to be a bit fishy, but now transmitter and ++ * receiver are both set to the intended baud rate, 115200. ++ * The magic value is 29.493 MHz. + */ + tr_ctrl.base_freq = regk_ser_f29_493; + rec_ctrl.base_freq = regk_ser_f29_493; +- tr_baud.div = (29493000 / 8) / 4800; ++ tr_baud.div = (29493000 / 8) / 115200; + rec_baud.div = (29493000 / 8) / 115200; +- ++ + REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); + REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud); + REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); +@@ -283,22 +285,28 @@ + decompress_kernel() + { + char revision; +- ++ reg_pinmux_rw_hwprot hwprot; ++ + /* input_data is set in head.S */ + inbuf = input_data; +- ++ ++ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); + #ifdef CONFIG_ETRAX_DEBUG_PORT0 + serial_setup(regi_ser0); + #endif + #ifdef CONFIG_ETRAX_DEBUG_PORT1 ++ hwprot.ser1 = regk_pinmux_yes; + serial_setup(regi_ser1); + #endif + #ifdef CONFIG_ETRAX_DEBUG_PORT2 ++ hwprot.ser2 = regk_pinmux_yes; + serial_setup(regi_ser2); + #endif + #ifdef CONFIG_ETRAX_DEBUG_PORT3 ++ hwprot.ser3 = regk_pinmux_yes; + serial_setup(regi_ser3); + #endif ++ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + + setup_normal_output_buffer(); + +@@ -307,11 +315,11 @@ + __asm__ volatile ("move $vr,%0" : "=rm" (revision)); + if (revision < 32) + { +- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n"); ++ puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); + while(1); + } + +- puts("Uncompressing Linux...\n"); ++ puts("Uncompressing Linux...\r\n"); + gunzip(); +- puts("Done. Now booting the kernel.\n"); ++ puts("Done. Now booting the kernel.\r\n"); + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/Makefile 2007-01-17 14:24:50.000000000 +0100 +@@ -1,36 +1,29 @@ + # +-# Makefile for rescue code ++# Makefile for rescue (bootstrap) code + # +-target = $(target_rescue_dir) +-src = $(src_rescue_dir) + + CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE) + CFLAGS = -O2 +-LD = gcc-cris -mlinux -march=v32 -nostdlib ++LD = gcc-cris -mlinux -march=v32 -nostdlib ++LDFLAGS = -T $(obj)/rescue.ld ++LDPOSTFLAGS = -lgcc + OBJCOPY = objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss +- +-all: $(target)/rescue.bin +- +-rescue: rescue.bin +- # do nothing +- +-$(target)/rescue.bin: $(target) $(target)/head.o +- $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o +- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin +- cp -p $(target)/rescue.bin $(objtree) +- +-$(target): +- mkdir -p $(target) +- +-$(target)/head.o: $(src)/head.S +- $(CC) -D__ASSEMBLY__ -c $< -o $*.o +- +-clean: +- rm -f $(target)/*.o $(target)/*.bin +- +-fastdep: +- +-modules: +- +-modules-install: ++obj-y = head.o bootload.o crisv32_nand.o nand_base.o nand_ids.o nand_ecc.o \ ++ lib.o ++OBJECTS = $(obj)/head.o $(obj)/bootload.o \ ++ $(obj)/crisv32_nand.o $(obj)/nand_base.o \ ++ $(obj)/nand_ids.o $(obj)/nand_ecc.o \ ++ $(obj)/lib.o $(obj)/../../lib/lib.a ++ ++targets := rescue.o rescue.bin ++ ++quiet_cmd_ldlibgcc = LD $@ ++cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@ ++ ++$(obj)/rescue.o: $(OBJECTS) FORCE ++ $(call if_changed,ldlibgcc) ++ ++$(obj)/rescue.bin: $(obj)/rescue.o FORCE ++ $(call if_changed,objcopy) ++ cp -p $(obj)/rescue.bin $(objtree) +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/bootload.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/bootload.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/bootload.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/bootload.c 2006-11-28 11:05:39.000000000 +0100 +@@ -0,0 +1,277 @@ ++/* ++ * bootload.c ++ * Simple boot loader for NAND chips on Etrax FS ++ * ++ * $Id: bootload.c,v 1.8 2006/11/28 10:05:39 ricardw Exp $ ++ * ++ */ ++ ++#include <linux/types.h> ++#include <linux/delay.h> ++ ++#include "mtd.h" ++#include "nand.h" ++ ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/reg_map.h> ++#include <asm/arch/hwregs/pinmux_defs.h> ++ ++#include "lib.h" ++ ++#define BOOT_ADDR (CONFIG_ETRAX_PTABLE_SECTOR + 0x40200000) ++ ++/* bits for nand_rw() `cmd'; or together as needed */ ++ ++#define NANDRW_READ 0x01 ++#define NANDRW_WRITE 0x00 ++#define NANDRW_JFFS2 0x02 ++#define NANDRW_JFFS2_SKIP 0x04 ++ ++#define ROUND_DOWN(value, boundary) ((value) & (~((boundary)-1))) ++ ++/* set $r8 to RAM_INIT_MAGIC, $r12 to NAND_BOOT_MAGIC then jump */ ++#define BOOT(addr) __asm__ volatile (" \ ++ move.d 0x56902387, $r8\n\ ++ move.d 0x9A9DB001, $r12\n\ ++ jump %0\n\ ++ nop\n\ ++ " : : "r" (addr)) ++ ++#define D(x) ++ ++extern struct mtd_info *crisv32_nand_flash_probe(void); ++ ++extern int _end, _bss, _edata; ++ ++/* ++ * NAND read/write from U-Boot 1.4.4 ++ * Modified for newer mtd and use of mtd interface instead of nand directly. ++ * ++ * cmd: 0: NANDRW_WRITE write, fail on bad block ++ * 1: NANDRW_READ read, fail on bad block ++ * 2: NANDRW_WRITE | NANDRW_JFFS2 write, skip bad blocks ++ * 3: NANDRW_READ | NANDRW_JFFS2 read, data all 0xff for bad blocks ++ * 7: NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP read, skip bad blocks ++ */ ++static int ++nand_rw (struct mtd_info* mtd, int cmd, ++ size_t start, size_t len, ++ size_t *retlen, u_char * buf) ++{ ++ int ret = 0, n, total = 0; ++ ++ /* eblk (once set) is the start of the erase block containing the ++ * data being processed. ++ */ ++ size_t eblk = ~0; /* force mismatch on first pass */ ++ size_t erasesize = mtd->erasesize; ++ ++ while (len) { ++ if ((start & (-erasesize)) != eblk) { ++ /* have crossed into new erase block, deal with ++ * it if it is marked bad. ++ */ ++ eblk = start & (-erasesize); /* start of block */ ++ D( ++ puts("New block "); ++ putx(eblk); ++ putnl(); ++ ) ++ if (mtd->block_isbad(mtd, eblk)) { ++ if (cmd == (NANDRW_READ | NANDRW_JFFS2)) { ++ while (len > 0 && ++ start - eblk < erasesize) { ++ *(buf++) = 0xff; ++ ++start; ++ ++total; ++ --len; ++ } ++ continue; ++ } else if (cmd == (NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP)) { ++ start += erasesize; ++ continue; ++ } else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) { ++ /* skip bad block */ ++ start += erasesize; ++ continue; ++ } else { ++ ret = 1; ++ break; ++ } ++ } ++ } ++ /* The ECC will not be calculated correctly if ++ less than 512 is written or read */ ++ /* Is request at least 512 bytes AND it starts on a proper boundry */ ++ if((start != ROUND_DOWN(start, 0x200)) || (len < 0x200)) ++ puts("Warning block writes should be at least 512 bytes and start on a 512 byte boundry\r\n"); ++ ++#if 0 ++ buf = (void *) 0x38008000; /* to fixed address, for testing */ ++#endif ++ ++ if (cmd & NANDRW_READ) { ++ ret = mtd->read_ecc(mtd, start, ++ min(len, eblk + erasesize - start), ++ (size_t *)&n, (u_char*)buf, ++ NULL, NULL); ++ } else { ++ ret = mtd->write_ecc(mtd, start, ++ min(len, eblk + erasesize - start), ++ (size_t *)&n, (u_char*)buf, ++ NULL, NULL); ++ } ++ ++ if (ret) { ++ break; ++ } ++ ++ start += n; ++ buf += n; ++ total += n; ++ len -= n; ++ } ++ if (retlen) ++ *retlen = total; ++ ++ return ret; ++} ++ ++ ++void ++bootload() ++{ ++ char revision; ++ struct mtd_info *mtd; ++ ++ serial_init(); ++ ++ __asm__ volatile ("move $vr,%0" : "=rm" (revision)); ++ if (revision < 32) ++ { ++ puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n"); ++ while(1); ++ } ++ ++ puts("\r\n\nETRAX FS NAND boot loader\r\n"); ++ puts("=========================\r\n"); ++ puts("Rev 1, " __DATE__ " " __TIME__ "\r\n"); ++ ++ puts("CPU revision: "); ++ putx(revision); ++ putnl(); ++ ++ puts("Bootloader main at ") ; ++ putx((int) bootload); ++ putnl(); ++ ++ puts("Data end: "); ++ putx((long) &_edata); ++ putnl(); ++ ++ puts("Bss: "); ++ putx((long) &_bss); ++ putnl(); ++ ++ puts("Heap: "); ++ putx((long) &_end); ++ putnl(); ++ ++#if 0 /* loop calibration */ ++ volatile int i; ++ puts ("10000 loops..."); ++ for (i = 0; i < 10000; i++) ++ udelay(1000); ++ puts("done\r\n"); ++#endif ++ ++ puts("Identifying nand chip...\r\n"); ++ mtd = crisv32_nand_flash_probe(); ++ puts("Done.\r\n"); ++ ++ if (mtd) { ++ puts("Chip identified. "); ++#if 0 /* print chip parameters */ ++ if (mtd->name) ++ puts(mtd->name); ++ ++ puts("\r\ntype: "); ++ putx(mtd->type); ++ puts("\r\nflags: "); ++ putx(mtd->flags); ++ puts("\r\nsize: "); ++ putx(mtd->size); ++ puts("\r\nerasesize: "); ++ putx(mtd->erasesize); ++ puts("\r\noobblock: "); ++ putx(mtd->oobblock); ++ puts("\r\noobsize: "); ++ putx(mtd->oobsize); ++ puts("\r\necctype: "); ++ putx(mtd->ecctype); ++ puts("\r\neccsize: "); ++ putx(mtd->eccsize); ++#endif ++ putnl(); ++ ++ puts("Bad blocks:\r\n"); ++ ++ int i; ++ for (i = 0; i < mtd->size; i += mtd->erasesize) { ++ if (mtd->block_isbad(mtd, i)) { ++ putx(i); ++ putnl(); ++ } ++ } ++ ++#if 0 /* print oob parameters */ ++ puts("Oob info:\r\n"); ++ puts("useecc: "); ++ putx(mtd->oobinfo.useecc); ++ puts("\r\neccbytes: "); ++ putx(mtd->oobinfo.eccbytes); ++ puts("\r\neccpos: "); ++ for (i = 0; i < mtd->oobinfo.eccbytes; i++) { ++ putx(mtd->oobinfo.eccpos[i]); ++ putc(' '); ++ } ++ putnl(); ++#endif ++ ++ puts("Bootload in progress..."); ++ int res, copied; ++ res = nand_rw(mtd, ++ NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP, ++ CONFIG_ETRAX_PTABLE_SECTOR, ++ 0x200000, /* 2 megs */ ++ &copied, ++ (void *) BOOT_ADDR); ++ ++ puts("complete, status "); ++ putx(res); ++ puts(", loaded "); ++ putx(copied); ++ puts(" bytes\r\n"); ++#if 1 ++ puts("Data in DRAM:\r\n"); ++ putx(* (int *) (BOOT_ADDR + 0)); ++ putc(' '); ++ putx(* (int *) (BOOT_ADDR + 4)); ++ putc(' '); ++ putx(* (int *) (BOOT_ADDR + 8)); ++ putnl(); ++#endif ++ ++ if (res) ++ error("Corrupt data in NAND flash."); ++ else ++ { ++ puts("Booting...\r\n"); ++ BOOT(BOOT_ADDR); ++ } ++ } else ++ error("No NAND flash chip found to boot from."); ++ ++ while (1) ++ ; /* hang around until hell freezes over */ ++} +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/crisv32_nand.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/crisv32_nand.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/crisv32_nand.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/crisv32_nand.c 2006-11-21 15:40:02.000000000 +0100 +@@ -0,0 +1,157 @@ ++/* ++ * Taken from arch/cris/arch-v32/drivers/nandflash.c ++ * and modified to use for boot loader. ++ * ++ * Copyright (c) 2004 ++ * ++ * Derived from drivers/mtd/nand/spia.c ++ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) ++ * ++ * $Id: crisv32_nand.c,v 1.2 2006/11/21 14:40:02 ricardw Exp $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include "mtd.h" ++#include "nand.h" ++ ++#if 0 ++#include <linux/mtd/partitions.h> ++#endif ++ ++#if 0 ++#include <asm/arch/memmap.h> ++#endif ++ ++#include <asm/arch/hwregs/reg_map.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/gio_defs.h> ++#include <asm/arch/hwregs/bif_core_defs.h> ++ ++#include "lib.h" ++ ++/* Hardware */ ++ ++#define CE_BIT 4 ++#define CLE_BIT 5 ++#define ALE_BIT 6 ++#define BY_BIT 7 ++ ++#define NAND_RD_ADDR 0x90000000 /* read address */ ++#define NAND_WR_ADDR 0x94000000 /* write address */ ++ ++static struct mtd_info *crisv32_mtd = NULL; ++ ++/* ++ * hardware specific access to control-lines ++ */ ++static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd) ++{ ++ unsigned long flags; ++ reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout); ++ ++ switch(cmd){ ++ case NAND_CTL_SETCLE: ++ dout.data |= (1<<CLE_BIT); ++ break; ++ case NAND_CTL_CLRCLE: ++ dout.data &= ~(1<<CLE_BIT); ++ break; ++ case NAND_CTL_SETALE: ++ dout.data |= (1<<ALE_BIT); ++ break; ++ case NAND_CTL_CLRALE: ++ dout.data &= ~(1<<ALE_BIT); ++ break; ++ case NAND_CTL_SETNCE: ++ dout.data &= ~(1<<CE_BIT); ++ break; ++ case NAND_CTL_CLRNCE: ++ dout.data |= (1<<CE_BIT); ++ break; ++ } ++ REG_WR(gio, regi_gio, rw_pa_dout, dout); ++#if 0 ++ /* read from gpio reg to flush pipeline. ++ * doesn't seem to be necessary. ++ */ ++ (void) REG_RD(gio, regi_gio, rw_pa_dout); /* gpio sync */ ++#endif ++} ++ ++/* ++ * read device ready pin ++ */ ++int crisv32_device_ready(struct mtd_info *mtd) ++{ ++ reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din); ++ return ((din.data & (1 << BY_BIT)) >> BY_BIT); ++} ++ ++/* ++ * Main initialization routine ++ */ ++struct mtd_info* crisv32_nand_flash_probe (void) ++{ ++ reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg); ++ reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe); ++ struct nand_chip *this; ++ int err = 0; ++ ++ /* Allocate memory for MTD device structure and private data */ ++ crisv32_mtd = malloc (sizeof(struct mtd_info) + sizeof (struct nand_chip)); ++ if (!crisv32_mtd) { ++ puts ("Unable to allocate CRISv32 NAND MTD device structure.\r\n"); ++ err = -ENOMEM; ++ return NULL; ++ } ++ ++ /* Get pointer to private data */ ++ this = (struct nand_chip *) (&crisv32_mtd[1]); ++ ++ pa_oe.oe |= 1 << CE_BIT; ++ pa_oe.oe |= 1 << ALE_BIT; ++ pa_oe.oe |= 1 << CLE_BIT; ++ pa_oe.oe &= ~ (1 << BY_BIT); ++ REG_WR(gio, regi_gio, rw_pa_oe, pa_oe); ++ ++ bif_cfg.gated_csp0 = regk_bif_core_rd; ++ bif_cfg.gated_csp1 = regk_bif_core_wr; ++ REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg); ++ ++ /* Initialize structures */ ++ memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info)); ++ memset((char *) this, 0, sizeof(struct nand_chip)); ++ ++ /* Link the private data with the MTD structure */ ++ crisv32_mtd->priv = this; ++ ++ /* Set address of NAND IO lines */ ++ this->IO_ADDR_R = (void *) NAND_RD_ADDR; ++ this->IO_ADDR_W = (void *) NAND_WR_ADDR; ++ this->hwcontrol = crisv32_hwcontrol; ++ this->dev_ready = crisv32_device_ready; ++ /* 20 us command delay time */ ++ this->chip_delay = 20; ++ this->eccmode = NAND_ECC_SOFT; ++ ++#if 0 /* don't use BBT in boot loader */ ++ /* Enable the following for a flash based bad block table */ ++ this->options = NAND_USE_FLASH_BBT; ++#endif ++ /* don't scan for BBT */ ++ this->options = NAND_SKIP_BBTSCAN; ++ ++ /* Scan to find existance of the device */ ++ if (nand_scan (crisv32_mtd, 1)) { ++ err = -ENXIO; ++ puts ("nand_scan failed\r\n"); ++ free (crisv32_mtd); ++ return NULL; ++ } ++ ++ return crisv32_mtd; ++} +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/head.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/head.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/head.S 2007-01-31 16:52:19.000000000 +0100 +@@ -1,14 +1,85 @@ +-/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $ +- * +- * This used to be the rescue code but now that is handled by the +- * RedBoot based RFL instead. Nothing to see here, move along. ++/* $Id: head.S,v 1.16 2007/01/31 15:52:19 pkj Exp $ ++ * ++ * Simple boot loader which can also handle NAND chips. + */ + +-#include <asm/arch/hwregs/reg_map_asm.h> +-#include <asm/arch/hwregs/config_defs_asm.h> ++#include <asm/arch/hwregs/asm/reg_map_asm.h> ++#include <asm/arch/hwregs/asm/config_defs_asm.h> ++ ++#define RAM_INIT_MAGIC 0x56902387 ++#define NAND_BOOT_MAGIC 0x9A9DB001 ++ ++;; Debugging. Normally all these are set to 0. ++#define LEDS (0) ++#define LEDTEST (0) ++#define FLASH_LEDS_INSTEAD_OF_BOOT (0) ++#define SERIAL_DUMP (0) ++#define SERIAL_PORT (0) ++#define SERIAL_RECEIVE (0) ++ ++#if LEDS ++#include <asm/arch/hwregs/asm/gio_defs_asm.h> ++#include <asm/arch/hwregs/asm/pinmux_defs_asm.h> ++#include <asm/arch/hwregs/asm/bif_core_defs_asm.h> ++#endif ++ ++#if SERIAL_DUMP ++#include <asm/arch/hwregs/asm/ser_defs_asm.h> ++#include <asm/arch/hwregs/asm/pinmux_defs_asm.h> ++#endif ++ ++ ++#if (SERIAL_PORT == 0) ++#define regi_serial regi_ser0 ++#endif ++#if (SERIAL_PORT == 1) ++#define regi_serial regi_ser1 ++#endif ++ ++;; Macros ++ ++#if LEDS ++.macro SAY x ++ orq 31, $r9 ++ and.d ~(\x), $r9 ++ move.d $r9, [$r8] ++.endm ++#else ++.macro SAY x ++ ;; nothing ++.endm ++#endif ++ ++#if SERIAL_DUMP ++.macro DISPLAY x ++ move.d \x, $r6 ; save value ++ moveq 28, $r5 ; counter / shift amount ++8: ++ move.d $r6, $r3 ; fetch value ++ bsr nybbleout ++ lsr.d $r5, $r3 ; shift nybble we want (delay slot) ++ subq 4, $r5 ; count down bits ++ bpl 8b ; loop ++ nop ++ bsr serout ++ moveq 13, $r3 ; delay slot ++ bsr serout ++ moveq 10, $r3 ; delay slot ++.endm ++#else ++.macro DISPLAY x ++ ;; nothing ++.endm ++#endif ++ ++ ++;; Code + + .text ++start: + ++ ;; TODO: Add code for Ronny's search-for-good-block boot rom algorithm ++ + ;; Start clocks for used blocks. + move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1 + move.d [$r1], $r0 +@@ -17,22 +88,258 @@ + REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0 + move.d $r0, [$r1] + +- ;; Copy 68KB NAND flash to Internal RAM (if NAND boot) +- move.d 0x38004000, $r10 +- move.d 0x8000, $r11 +- move.d 0x11000, $r12 +- move.d copy_complete, $r13 +- and.d 0x000fffff, $r13 +- or.d 0x38000000, $r13 ++ ++#if LEDS ++ ;; set up for led control on PB 0..4 ++ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r8 ; output reg ++ move.d [$r8], $r9 ; shadow ++ ++ ;; set up pinmux ++ move.d REG_ADDR(pinmux, regi_pinmux, rw_pb_gio), $r2 ++ move.d [$r2], $r3 ++ orq 31, $r3 ++ move.d $r3, [$r2] ++ ++ ;; set up GPIO ++ ;; set to outputs ++ move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r2 ++ move.d [$r2], $r3 ++ orq 31, $r3 ++ move.d $r3, [$r2] ++ ++ ++#if LEDTEST ++ ;; led test ++ ++ moveq 0, $r1 ; led 5-bit binary counter ++1: ++ or.d 31, $r9 ++ xor $r1, $r9 ++ move.d $r9, [$r8] ++ addq 1, $r1 ++ ++ move.d 100000000, $r2 ; delay loop (100e6 => 1s @200Mc) ++2: ++ bne 2b ++ subq 1, $r2 ++ ++ ba 1b ; loop ++ nop ++#endif ++ ++#endif ++ ++ ++check_nand_boot: ++ ;; Check boot source by checking highest nybble of PC: ++ ;; If we're running at address 0x0XXXXXXX, we're in flash/eprom/sram ++ ;; If we're running at address 0x38000000, we're in internal RAM, ++ ;; so we're most likely coming from NAND. ++ ;; If we're running at address 0x40000000, we're in SDRAM, ++ ;; so we've most likely been started by some sort of bootstrapper ++ ;; e.g. fsboot, which in turn implies NAND, else we would be booting ++ ;; normally at 0x0XXXXXXX ++ ++ SAY 1 ++ ++here: ++ lapcq ., $r0 ; get PC ++ sub.d (here-start), $r0 ; offset from here ++ beq normal_boot ; running at address 0 - normal boot ++ move.d $r0, $r13 ; save offset for later (unused delay slot) ++ lsrq 28, $r0 ; get highest nybble ++ ++ SAY 2 ++ ++ ;; Prepare to copy 128KB of the NAND flash to internal RAM ++ move.d 0x38000200, $r10 ; dest in internal RAM ++ move.d 0x1fe00, $r12 ; #bytes ++ cmpq 4, $r0 ; running in RAM => started by fsboot ++ bhs copy_from_ram ++ movu.w 0x0200, $r11 ; source in flash (byte address) (DELAY SLOT) + + #include "../../lib/nand_init.S" + +- ;; No NAND found ++#if LEDS ++ ;; must set up registers again (clobbered by nand_init) ++ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r8 ; output reg ++ move.d [$r8], $r9 ; shadow ++#endif ++ ++ SAY 3 ++ ++ ba copy_complete ++ nop ++ ++ ; Since the code above has to reside within the first 256 bytes of ++ ; NAND flash, verify that the code so far hasn't gone past this ++ ; limit. If you're considering removing this, you haven't ++ ; properly understood the problem; see nand_init.S for details. ++ .org PAGE_SIZE_ADDRESSES ; from nand_init.S ++ .org PAGE_SIZE_BYTES ; from nand_init.S ++ ++normal_boot: ++ SAY 4 ++ ++ ;; Normal NOR boot + move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10 +- jump $r10 ; Jump to decompresser ++ jump $r10 ; Jump to decompresser ++ nop ++ ++copy_from_ram: ++ add.d $r13, $r11 ; mem offs + src offs -> src addr ++1: ++ move.d [$r11+], $r0 ; read source ++ subq 4, $r12 ; 4 bytes at a time ++ bne 1b ; loop until done ++ move.d $r0, [$r10+] ; write dest (DELAY SLOT) ++ jump copy_complete ; jump to internal RAM ++ nop ; delay slot ++ ++copy_complete: ++ SAY 5 ++ ++#if FLASH_LEDS_INSTEAD_OF_BOOT ++ ++flash: ++ ++ ;; led test ++ ++ moveq 0, $r1 ; led binary counter ++1: ++ or.d 31, $r9 ++ xor $r1, $r9 ++ move.d $r9, [$r8] ++ addq 1, $r1 ++ ++ move.d 100000000, $r2 ; delay loop (100e6 => 1s) ++2: ++ bne 2b ++ subq 1, $r2 ++ ++ ba 1b ; loop forever + nop ++#endif + +-copy_complete: +- move.d 0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10 +- jump $r10 ; Jump to decompresser ++ ++#if SERIAL_DUMP ++ ;; dump memory to serial port ++ ++#if (SERIAL_PORT == 1) ++ ;; set up serial-1 pins ++ move.d REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1 ++ move.d [$r1], $r0 ++ or.d REG_STATE(pinmux, rw_hwprot, ser1, yes), $r0 ++ move.d $r0, [$r1] ++#endif ++ ++ ;; rw_xoff: chr and automatic = 0 ++ move.d REG_ADDR(ser, regi_serial, rw_xoff), $r1 ++ move.d [$r1], $r0 ++ and.d ~(REG_MASK(ser, rw_xoff, automatic) | REG_MASK(ser, rw_xoff, chr)), $r0 ++ move.d $r0, [$r1] ++ ++ ;; tr control ++ move.d REG_ADDR(ser, regi_serial, rw_tr_ctrl), $r1 ++ move.d [$r1], $r0 ++ and.d ~(REG_MASK(ser, rw_tr_ctrl, base_freq) | REG_MASK(ser, rw_tr_ctrl, stop_bits)), $r0 ++ or.d REG_STATE(ser, rw_tr_ctrl, stop_bits, bits2) | REG_STATE(ser, rw_tr_ctrl, base_freq, f29_493) | REG_STATE(ser, rw_tr_ctrl, en, yes), $r0 ++ move.d $r0, [$r1] ++ ++ ;; tr baud ++ move.d REG_ADDR(ser, regi_serial, rw_tr_baud_div), $r1 ++ move.d [$r1], $r0 ++ move.w (29493000 / 8) / 115200, $r0 ++ move.d $r0, [$r1] ++ ++#if SERIAL_RECEIVE ++ ;; rec control ++ move.d REG_ADDR(ser, regi_serial, rw_rec_ctrl), $r1 ++ move.d [$r1], $r0 ++ and.d ~(REG_MASK(ser, rw_rec_ctrl, base_freq)), $r0 ++ or.d REG_STATE(ser, rw_rec_ctrl, base_freq, f29_493) | REG_STATE(ser, rw_tr_ctrl, en, yes), $r0 ++ move.d $r0, [$r1] ++ ++ ;; rec baud ++ move.d REG_ADDR(ser, regi_serial, rw_rec_baud_div), $r1 ++ move.d [$r1], $r0 ++ move.w (29493000 / 8) / 115200, $r0 ++ move.d $r0, [$r1] ++#endif ++ ++ ;; dump memory ++ ++ move.d 0x38000000, $r5 ; pointer ++ ++ bsr serout ++ moveq 13, $r3 ++ bsr serout ++ moveq 10, $r3 ++ bsr serout ++ moveq 10, $r3 ++ ++1: ++ movu.b [$r5+], $r3 ; get value ++ move.d $r3, $r6 ; save ++ ++ bsr nybbleout ++ lsrq 4, $r3 ; high nybble (delay slot) ++ ++ move.d $r6, $r3 ; restore ++ bsr nybbleout ++ andq 15, $r3 ; delay slot ++ ++ movu.b 32, $r3 ++ bsr serout + nop ++ ++ move.d $r5, $r3 ++ andq 15, $r3 ++ bne 1b ++ nop ++ ++ bsr serout ++ moveq 13, $r3 ; delay slot ++ bsr serout ++ moveq 10, $r3 ; delay slot ++ ++ ba 1b ; loop forever ++ nop ++ ++nybbleout: ++ cmpq 10, $r3 ++ blo 1f ++ addq 48, $r3 ; delay slot ++ addq 7, $r3 ++1: ++serout: ++ move.d REG_ADDR(ser, regi_serial, rs_stat_din), $r1 ++ move.d REG_ADDR(ser, regi_serial, rw_dout), $r2 ++2: ++ move.d [$r1], $r4 ++ btstq REG_BIT(ser, rs_stat_din, tr_rdy), $r4 ++ bpl 2b ++ nop ++ ret ++ move.d $r3, [$r2] ; delay slot ++ ++#endif ++ ++;; Init DRAM ++ ++#include "../../lib/dram_init.S" ++ move.d RAM_INIT_MAGIC, $r8 ; tell kernel boot loader dram init'd ++ move.d NAND_BOOT_MAGIC, $r12 ; booted from NAND flash ++ ++;; TODO: Clear .bss (not needed yet because size of .bss is zero) ++;; TODO: Change .ld script so that BSS is in DRAM? ++ ++;; Ok, time to do something. Continue with boot loader in C. ++;; Must set up minimal C environment first though. ++ ++ move.d 0x38020000, $sp ; stack pointer at top of internal RAM ++ ++ move.d bootload, $r10 ++ jump $r10 ; Jump to boot loader ++ nop ++ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.c 2006-11-03 11:35:52.000000000 +0100 +@@ -0,0 +1,243 @@ ++/* ++ * lib.c ++ * Small practical functions for boot loader ++ * malloc/free ++ * memcpy/memset ++ * writeb/writew/readb/readw ++ * putc/puts/putnybble/putx ++ * error/error2/BUG ++ * serial_init ++ * ++ * $Id: lib.c,v 1.4 2006/11/03 10:35:52 pkj Exp $ ++ * ++ */ ++ ++#include <linux/types.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/reg_map.h> ++#include <asm/arch/hwregs/ser_defs.h> ++#include <asm/arch/hwregs/pinmux_defs.h> ++ ++#include "lib.h" ++ ++/* the "heap" is put directly after BSS ends, at _end */ ++ ++extern int _end; ++static long free_mem_ptr = (long)&_end; ++ ++void *malloc(int size) ++{ ++ void *p; ++ ++ if (size <0) error("Malloc error"); ++ ++ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ ++ ++ p = (void *)free_mem_ptr; ++ free_mem_ptr += size; ++ ++ return p; ++} ++ ++void free(void *where) ++{ /* Don't care */ ++} ++ ++/* I/O */ ++ ++unsigned char readb(const volatile void *addr) ++{ ++ return *(volatile unsigned char *) addr; ++} ++ ++unsigned short readw(const volatile void *addr) ++{ ++ return *(volatile unsigned short *) addr; ++} ++ ++void writeb(unsigned char b, volatile void *addr) ++{ ++ *(volatile unsigned char *) addr = b; ++} ++ ++void writew(unsigned short b, volatile void *addr) ++{ ++ *(volatile unsigned short *) addr = b; ++} ++ ++/* info and error messages to serial console */ ++ ++#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL ++static inline void ++serout(const char c, reg_scope_instances regi_ser) ++{ ++ reg_ser_rs_stat_din rs; ++ reg_ser_rw_dout dout = {.data = c}; ++ ++ do { ++ rs = REG_RD(ser, regi_ser, rs_stat_din); ++ } ++ while (!rs.tr_rdy);/* Wait for tranceiver. */ ++ ++ REG_WR(ser, regi_ser, rw_dout, dout); ++} ++ ++ ++void ++putc(const char c) ++{ ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ serout(c, regi_ser0); ++#endif ++#ifdef CONFIG_ETRAX_DEBUG_PORT1 ++ serout(c, regi_ser1); ++#endif ++#ifdef CONFIG_ETRAX_DEBUG_PORT2 ++ serout(c, regi_ser2); ++#endif ++#ifdef CONFIG_ETRAX_DEBUG_PORT3 ++ serout(c, regi_ser3); ++#endif ++} ++ ++ ++void ++puts(const char *s) ++{ ++ while (*s) ++ putc(*s++); ++} ++ ++void ++putnybble(int n) ++{ ++ putc("0123456789abcdef"[n & 15]); ++} ++ ++void ++putx(int x) ++{ ++ int i; ++ ++ puts("0x"); ++ for (i = 7; i >= 0; i--) ++ putnybble(x >> 4*i); ++} ++ ++void ++putnl() ++{ ++ puts("\r\n"); ++} ++ ++#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */ ++ ++void* ++memset(void* s, int c, size_t n) ++{ ++ int i; ++ char *ss = (char*)s; ++ ++ for (i=0;i<n;i++) ss[i] = c; ++} ++ ++void* ++memcpy(void* __dest, __const void* __src, ++ size_t __n) ++{ ++ int i; ++ char *d = (char *)__dest, *s = (char *)__src; ++ ++ for (i=0;i<__n;i++) d[i] = s[i]; ++} ++ ++void ++error(const char *x) ++{ ++ puts("\r\n\n"); ++ puts(x); ++ puts("\r\n\n -- System halted\n"); ++ ++ while(1); /* Halt */ ++} ++ ++void ++error2(const char *x, int y, const char *z) ++{ ++ puts("\r\n\n"); ++ puts(x); ++ putc(':'); ++ putx(y); ++ putc(':'); ++ puts(z); ++ puts("\r\n\n -- System halted\n"); ++ ++ while(1); /* Halt */ ++} ++ ++static inline void ++serial_setup(reg_scope_instances regi_ser) ++{ ++ reg_ser_rw_xoff xoff; ++ reg_ser_rw_tr_ctrl tr_ctrl; ++ reg_ser_rw_rec_ctrl rec_ctrl; ++ reg_ser_rw_tr_baud_div tr_baud; ++ reg_ser_rw_rec_baud_div rec_baud; ++ ++ /* Turn off XOFF. */ ++ xoff = REG_RD(ser, regi_ser, rw_xoff); ++ ++ xoff.chr = 0; ++ xoff.automatic = regk_ser_no; ++ ++ REG_WR(ser, regi_ser, rw_xoff, xoff); ++ ++ /* Set baudrate and stopbits. */ ++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); ++ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); ++ tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div); ++ rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div); ++ ++ tr_ctrl.stop_bits = 1; /* 2 stop bits. */ ++ tr_ctrl.en = 1; /* enable transmitter */ ++ rec_ctrl.en = 1; /* enabler receiver */ ++ ++ /* ++ * The baudrate setup used to be a bit fishy, but now transmitter and ++ * receiver are both set to the intended baud rate, 115200. ++ * The magic value is 29.493 MHz. ++ */ ++ tr_ctrl.base_freq = regk_ser_f29_493; ++ rec_ctrl.base_freq = regk_ser_f29_493; ++ tr_baud.div = (29493000 / 8) / 115200; ++ rec_baud.div = (29493000 / 8) / 115200; ++ ++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); ++ REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud); ++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); ++ REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud); ++} ++ ++void ++serial_init() ++{ ++ reg_pinmux_rw_hwprot hwprot; ++ ++ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ serial_setup(regi_ser0); ++#endif ++#ifdef CONFIG_ETRAX_DEBUG_PORT1 ++ hwprot.ser1 = regk_pinmux_yes; ++ serial_setup(regi_ser1); ++#endif ++#ifdef CONFIG_ETRAX_DEBUG_PORT2 ++ hwprot.ser2 = regk_pinmux_yes; ++ serial_setup(regi_ser2); ++#endif ++#ifdef CONFIG_ETRAX_DEBUG_PORT3 ++ hwprot.ser3 = regk_pinmux_yes; ++ serial_setup(regi_ser3); ++#endif ++ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); ++} +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.h 2006-11-03 11:35:52.000000000 +0100 +@@ -0,0 +1,56 @@ ++/* ++ * lib.c ++ * Small practical functions for boot loader ++ * malloc/free ++ * memset/memcpy ++ * putc/puts/putnybble/putd ++ * writeb/writew/readb/readw ++ * error/error2/BUG ++ * serial_init ++ * ++ * $Id: lib.h,v 1.3 2006/11/03 10:35:52 pkj Exp $ ++ * ++ */ ++ ++#ifndef _LIB_H ++#define _LIB_H ++ ++#include <linux/types.h> ++ ++/* nice stuff we need without having any library around */ ++ ++void* memset(void* s, int c, size_t n); ++void* memcpy(void* __dest, __const void* __src, ++ size_t __n); ++ ++#define memzero(s, n) memset ((s), 0, (n)) ++ ++#undef BUG ++#define BUG() error2("BUG in " __FILE__, __LINE__, __FUNCTION__) ++ ++void *malloc(int size); ++void free(void *where); ++void error(const char *m); ++void error2(const char *m, int l, const char *f); ++void serial_init(void); ++ ++#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL ++void putc(const char); ++void puts(const char *); ++void putnybble(int n); ++void putx(int x); ++void putnl(); ++#else ++#define putc(ch) ++#define puts(str) ++#define putnybble(nyb) ++#define putx(x) ++#define putnl() ++#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */ ++ ++unsigned char readb(const volatile void *addr); ++unsigned short readw(const volatile void *addr); ++void writeb(unsigned char b, volatile void *addr); ++void writew(unsigned short b, volatile void *addr); ++ ++#endif /* _LIB_H */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd-abi.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd-abi.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd-abi.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd-abi.h 2006-09-06 11:21:07.000000000 +0200 +@@ -0,0 +1,121 @@ ++/* ++ * $Id: mtd-abi.h,v 1.1 2006/09/06 09:21:07 ricardw Exp $ ++ * ++ * Portions of MTD ABI definition which are shared by kernel and user space ++ */ ++ ++#ifndef __MTD_ABI_H__ ++#define __MTD_ABI_H__ ++ ++#ifndef __KERNEL__ /* Urgh. The whole point of splitting this out into ++ separate files was to avoid #ifdef __KERNEL__ */ ++#define __user ++#endif ++ ++struct erase_info_user { ++ uint32_t start; ++ uint32_t length; ++}; ++ ++struct mtd_oob_buf { ++ uint32_t start; ++ uint32_t length; ++ unsigned char __user *ptr; ++}; ++ ++#define MTD_ABSENT 0 ++#define MTD_RAM 1 ++#define MTD_ROM 2 ++#define MTD_NORFLASH 3 ++#define MTD_NANDFLASH 4 ++#define MTD_PEROM 5 ++#define MTD_DATAFLASH 6 ++#define MTD_OTHER 14 ++#define MTD_UNKNOWN 15 ++ ++#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash) ++#define MTD_SET_BITS 2 // Bits can be set ++#define MTD_ERASEABLE 4 // Has an erase function ++#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible ++#define MTD_VOLATILE 16 // Set for RAMs ++#define MTD_XIP 32 // eXecute-In-Place possible ++#define MTD_OOB 64 // Out-of-band data (NAND flash) ++#define MTD_ECC 128 // Device capable of automatic ECC ++#define MTD_NO_VIRTBLOCKS 256 // Virtual blocks not allowed ++#define MTD_PROGRAM_REGIONS 512 // Configurable Programming Regions ++ ++// Some common devices / combinations of capabilities ++#define MTD_CAP_ROM 0 ++#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE) ++#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE) ++#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB) ++#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS) ++ ++ ++// Types of automatic ECC/Checksum available ++#define MTD_ECC_NONE 0 // No automatic ECC available ++#define MTD_ECC_RS_DiskOnChip 1 // Automatic ECC on DiskOnChip ++#define MTD_ECC_SW 2 // SW ECC for Toshiba & Samsung devices ++ ++/* ECC byte placement */ ++#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended) ++#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode) ++#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme ++#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read) ++#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default ++ ++/* OTP mode selection */ ++#define MTD_OTP_OFF 0 ++#define MTD_OTP_FACTORY 1 ++#define MTD_OTP_USER 2 ++ ++struct mtd_info_user { ++ uint8_t type; ++ uint32_t flags; ++ uint32_t size; // Total size of the MTD ++ uint32_t erasesize; ++ uint32_t oobblock; // Size of OOB blocks (e.g. 512) ++ uint32_t oobsize; // Amount of OOB data per block (e.g. 16) ++ uint32_t ecctype; ++ uint32_t eccsize; ++}; ++ ++struct region_info_user { ++ uint32_t offset; /* At which this region starts, ++ * from the beginning of the MTD */ ++ uint32_t erasesize; /* For this region */ ++ uint32_t numblocks; /* Number of blocks in this region */ ++ uint32_t regionindex; ++}; ++ ++struct otp_info { ++ uint32_t start; ++ uint32_t length; ++ uint32_t locked; ++}; ++ ++#define MEMGETINFO _IOR('M', 1, struct mtd_info_user) ++#define MEMERASE _IOW('M', 2, struct erase_info_user) ++#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf) ++#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf) ++#define MEMLOCK _IOW('M', 5, struct erase_info_user) ++#define MEMUNLOCK _IOW('M', 6, struct erase_info_user) ++#define MEMGETREGIONCOUNT _IOR('M', 7, int) ++#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user) ++#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo) ++#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo) ++#define MEMGETBADBLOCK _IOW('M', 11, loff_t) ++#define MEMSETBADBLOCK _IOW('M', 12, loff_t) ++#define OTPSELECT _IOR('M', 13, int) ++#define OTPGETREGIONCOUNT _IOW('M', 14, int) ++#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info) ++#define OTPLOCK _IOR('M', 16, struct otp_info) ++ ++struct nand_oobinfo { ++ uint32_t useecc; ++ uint32_t eccbytes; ++ uint32_t oobfree[8][2]; ++ uint32_t eccpos[32]; ++}; ++ ++#endif /* __MTD_ABI_H__ */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd.h 2006-12-14 07:59:24.000000000 +0100 +@@ -0,0 +1,270 @@ ++/* ++ * $Id: mtd.h,v 1.5 2006/12/14 06:59:24 ricardw Exp $ ++ * ++ * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al. ++ * ++ * Released under GPL ++ */ ++ ++#ifndef __MTD_MTD_H__ ++#define __MTD_MTD_H__ ++ ++#ifndef __KERNEL__ ++#error This is a kernel header. Perhaps include mtd-user.h instead? ++#endif ++ ++/* only include absolutely necessary linux headers which will not change ++ * significantly ++ */ ++#include <linux/types.h> ++#include <linux/errno.h> ++ ++#if 0 ++#include <linux/module.h> ++#include <linux/uio.h> ++#include <linux/notifier.h> ++ ++#include <linux/mtd/compatmac.h> ++#include <mtd/mtd-abi.h> ++#endif ++ ++#include "mtd-abi.h" ++ ++/* local config, we don't want linux/config.h here */ ++/* any undef/define pairs here avoid warnings due to linux autoconf includes */ ++#undef CONFIG_MTD_PARTITIONS ++#undef CONFIG_MTD_DEBUG ++#undef CONFIG_MTD_NAND_VERIFY_WRITE ++#define CONFIG_MTD_NAND_VERIFY_WRITE ++ ++/* our MTD config */ ++ ++#define NAND_BBT_SUPPORT 0 ++#define NAND_WRITE_SUPPORT 0 ++#define NAND_ERASE_SUPPORT 0 ++#define NAND_MULTICHIP_SUPPORT 0 ++#define NAND_HWECC_SUPPORT 0 ++#define NAND_KVEC_SUPPORT 0 ++ ++ ++#define MTD_CHAR_MAJOR 90 ++#define MTD_BLOCK_MAJOR 31 ++#define MAX_MTD_DEVICES 16 ++ ++#define MTD_ERASE_PENDING 0x01 ++#define MTD_ERASING 0x02 ++#define MTD_ERASE_SUSPEND 0x04 ++#define MTD_ERASE_DONE 0x08 ++#define MTD_ERASE_FAILED 0x10 ++ ++/* If the erase fails, fail_addr might indicate exactly which block failed. If ++ fail_addr = 0xffffffff, the failure was not at the device level or was not ++ specific to any particular block. */ ++struct erase_info { ++ struct mtd_info *mtd; ++ u_int32_t addr; ++ u_int32_t len; ++ u_int32_t fail_addr; ++ u_long time; ++ u_long retries; ++ u_int dev; ++ u_int cell; ++ void (*callback) (struct erase_info *self); ++ u_long priv; ++ u_char state; ++ struct erase_info *next; ++}; ++ ++struct mtd_erase_region_info { ++ u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ ++ u_int32_t erasesize; /* For this region */ ++ u_int32_t numblocks; /* Number of blocks of erasesize in this region */ ++}; ++ ++struct mtd_info { ++ u_char type; ++ u_int32_t flags; ++ u_int32_t size; // Total size of the MTD ++ ++ /* "Major" erase size for the device. Naïve users may take this ++ * to be the only erase size available, or may use the more detailed ++ * information below if they desire ++ */ ++ u_int32_t erasesize; ++ ++ u_int32_t oobblock; // Size of OOB blocks (e.g. 512) ++ u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) ++ u_int32_t ecctype; ++ u_int32_t eccsize; ++ ++ /* ++ * Reuse some of the above unused fields in the case of NOR flash ++ * with configurable programming regions to avoid modifying the ++ * user visible structure layout/size. Only valid when the ++ * MTD_PROGRAM_REGIONS flag is set. ++ * (Maybe we should have an union for those?) ++ */ ++#define MTD_PROGREGION_SIZE(mtd) (mtd)->oobblock ++#define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize ++#define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype ++ ++ // Kernel-only stuff starts here. ++ char *name; ++ int index; ++ ++ // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) ++ struct nand_oobinfo oobinfo; ++ u_int32_t oobavail; // Number of bytes in OOB area available for fs ++ ++ /* Data for variable erase regions. If numeraseregions is zero, ++ * it means that the whole device has erasesize as given above. ++ */ ++ int numeraseregions; ++ struct mtd_erase_region_info *eraseregions; ++ ++ /* This really shouldn't be here. It can go away in 2.5 */ ++ u_int32_t bank_size; ++ ++ int (*erase) (struct mtd_info *mtd, struct erase_info *instr); ++ ++ /* This stuff for eXecute-In-Place */ ++ int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); ++ ++ /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ ++ void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); ++ ++ ++ int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); ++ int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); ++ ++ int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); ++ int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); ++ ++ int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); ++ int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); ++ ++ /* ++ * Methods to access the protection register area, present in some ++ * flash devices. The user data is one time programmable but the ++ * factory data is read only. ++ */ ++ int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); ++ int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); ++ int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len); ++ int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); ++ int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); ++ int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len); ++ ++#if NAND_KVEC_SUPPORT ++ /* kvec-based read/write methods. We need these especially for NAND flash, ++ with its limited number of write cycles per erase. ++ NB: The 'count' parameter is the number of _vectors_, each of ++ which contains an (ofs, len) tuple. ++ */ ++ int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); ++ int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, ++ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); ++ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); ++ int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, ++ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); ++#endif ++ ++ /* Sync */ ++ void (*sync) (struct mtd_info *mtd); ++ ++ /* Chip-supported device locking */ ++ int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); ++ int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); ++ ++ /* Power Management functions */ ++ int (*suspend) (struct mtd_info *mtd); ++ void (*resume) (struct mtd_info *mtd); ++ ++ /* Bad block management functions */ ++ int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); ++ int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); ++ ++#if 0 /* don't know what this is for */ ++ struct notifier_block reboot_notifier; /* default mode before reboot */ ++#endif ++ ++ void *priv; ++ ++ struct module *owner; ++ int usecount; ++}; ++ ++#if 0 /* don't need these */ ++ /* Kernel-side ioctl definitions */ ++ ++extern int add_mtd_device(struct mtd_info *mtd); ++extern int del_mtd_device (struct mtd_info *mtd); ++ ++extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); ++ ++extern void put_mtd_device(struct mtd_info *mtd); ++ ++ ++struct mtd_notifier { ++ void (*add)(struct mtd_info *mtd); ++ void (*remove)(struct mtd_info *mtd); ++ struct list_head list; ++}; ++ ++ ++extern void register_mtd_user (struct mtd_notifier *new); ++extern int unregister_mtd_user (struct mtd_notifier *old); ++#endif ++ ++#if NAND_KVEC_SUPPORT ++int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, ++ unsigned long count, loff_t to, size_t *retlen); ++ ++int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, ++ unsigned long count, loff_t from, size_t *retlen); ++#endif ++ ++#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args) ++#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d)) ++#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg) ++#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args) ++#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args) ++#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args) ++#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args) ++#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args) ++#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args) ++#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args) ++#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args) ++#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0) ++ ++ ++#ifdef CONFIG_MTD_PARTITIONS ++void mtd_erase_callback(struct erase_info *instr); ++#else ++static inline void mtd_erase_callback(struct erase_info *instr) ++{ ++ if (instr->callback) ++ instr->callback(instr); ++} ++#endif ++ ++/* ++ * Debugging macro and defines ++ */ ++#define MTD_DEBUG_LEVEL0 (0) /* Quiet */ ++#define MTD_DEBUG_LEVEL1 (1) /* Audible */ ++#define MTD_DEBUG_LEVEL2 (2) /* Loud */ ++#define MTD_DEBUG_LEVEL3 (3) /* Noisy */ ++ ++#ifdef CONFIG_MTD_DEBUG ++#define DEBUG(n, args...) \ ++ do { \ ++ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ ++ printk(KERN_INFO args); \ ++ } while(0) ++#else /* CONFIG_MTD_DEBUG */ ++#define DEBUG(n, args...) do { } while(0) ++ ++#endif /* CONFIG_MTD_DEBUG */ ++ ++#endif /* __MTD_MTD_H__ */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand.h 2006-11-03 11:35:52.000000000 +0100 +@@ -0,0 +1,521 @@ ++/* ++ * linux/include/linux/mtd/nand.h ++ * ++ * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com> ++ * Steven J. Hill <sjhill@realitydiluted.com> ++ * Thomas Gleixner <tglx@linutronix.de> ++ * ++ * $Id: nand.h,v 1.4 2006/11/03 10:35:52 pkj Exp $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Info: ++ * Contains standard defines and IDs for NAND flash devices ++ * ++ * Changelog: ++ * 01-31-2000 DMW Created ++ * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers ++ * so it can be used by other NAND flash device ++ * drivers. I also changed the copyright since none ++ * of the original contents of this file are specific ++ * to DoC devices. David can whack me with a baseball ++ * bat later if I did something naughty. ++ * 10-11-2000 SJH Added private NAND flash structure for driver ++ * 10-24-2000 SJH Added prototype for 'nand_scan' function ++ * 10-29-2001 TG changed nand_chip structure to support ++ * hardwarespecific function for accessing control lines ++ * 02-21-2002 TG added support for different read/write adress and ++ * ready/busy line access function ++ * 02-26-2002 TG added chip_delay to nand_chip structure to optimize ++ * command delay times for different chips ++ * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate ++ * defines in jffs2/wbuf.c ++ * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if ++ * CONFIG_MTD_NAND_ECC_JFFS2 is not set ++ * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC ++ * ++ * 08-29-2002 tglx nand_chip structure: data_poi for selecting ++ * internal / fs-driver buffer ++ * support for 6byte/512byte hardware ECC ++ * read_ecc, write_ecc extended for different oob-layout ++ * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, ++ * NAND_YAFFS_OOB ++ * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL ++ * Split manufacturer and device ID structures ++ * ++ * 02-08-2004 tglx added option field to nand structure for chip anomalities ++ * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id ++ * update of nand_chip structure description ++ * 01-17-2005 dmarlin added extended commands for AG-AND device and added option ++ * for BBT_AUTO_REFRESH. ++ * 01-20-2005 dmarlin added optional pointer to hardware specific callback for ++ * extra error status checks. ++ */ ++#ifndef __LINUX_MTD_NAND_H ++#define __LINUX_MTD_NAND_H ++ ++#if 0 /* avoid these as much as possible */ ++#include <linux/wait.h> ++#include <linux/spinlock.h> ++#include <linux/mtd/mtd.h> ++#endif ++ ++#include "mtd.h" /* local */ ++ ++#include <linux/kernel.h> /* we do need this though ... */ ++ ++struct mtd_info; ++/* Scan and identify a NAND device */ ++extern int nand_scan (struct mtd_info *mtd, int max_chips); ++/* Free resources held by the NAND device */ ++extern void nand_release (struct mtd_info *mtd); ++ ++/* Read raw data from the device without ECC */ ++extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); ++ ++ ++/* The maximum number of NAND chips in an array */ ++#define NAND_MAX_CHIPS 8 ++ ++/* This constant declares the max. oobsize / page, which ++ * is supported now. If you add a chip with bigger oobsize/page ++ * adjust this accordingly. ++ */ ++#define NAND_MAX_OOBSIZE 64 ++ ++/* ++ * Constants for hardware specific CLE/ALE/NCE function ++*/ ++/* Select the chip by setting nCE to low */ ++#define NAND_CTL_SETNCE 1 ++/* Deselect the chip by setting nCE to high */ ++#define NAND_CTL_CLRNCE 2 ++/* Select the command latch by setting CLE to high */ ++#define NAND_CTL_SETCLE 3 ++/* Deselect the command latch by setting CLE to low */ ++#define NAND_CTL_CLRCLE 4 ++/* Select the address latch by setting ALE to high */ ++#define NAND_CTL_SETALE 5 ++/* Deselect the address latch by setting ALE to low */ ++#define NAND_CTL_CLRALE 6 ++/* Set write protection by setting WP to high. Not used! */ ++#define NAND_CTL_SETWP 7 ++/* Clear write protection by setting WP to low. Not used! */ ++#define NAND_CTL_CLRWP 8 ++ ++/* ++ * Standard NAND flash commands ++ */ ++#define NAND_CMD_READ0 0 ++#define NAND_CMD_READ1 1 ++#define NAND_CMD_PAGEPROG 0x10 ++#define NAND_CMD_READOOB 0x50 ++#define NAND_CMD_ERASE1 0x60 ++#define NAND_CMD_STATUS 0x70 ++#define NAND_CMD_STATUS_MULTI 0x71 ++#define NAND_CMD_SEQIN 0x80 ++#define NAND_CMD_READID 0x90 ++#define NAND_CMD_ERASE2 0xd0 ++#define NAND_CMD_RESET 0xff ++ ++/* Extended commands for large page devices */ ++#define NAND_CMD_READSTART 0x30 ++#define NAND_CMD_CACHEDPROG 0x15 ++ ++/* Extended commands for AG-AND device */ ++/* ++ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but ++ * there is no way to distinguish that from NAND_CMD_READ0 ++ * until the remaining sequence of commands has been completed ++ * so add a high order bit and mask it off in the command. ++ */ ++#define NAND_CMD_DEPLETE1 0x100 ++#define NAND_CMD_DEPLETE2 0x38 ++#define NAND_CMD_STATUS_MULTI 0x71 ++#define NAND_CMD_STATUS_ERROR 0x72 ++/* multi-bank error status (banks 0-3) */ ++#define NAND_CMD_STATUS_ERROR0 0x73 ++#define NAND_CMD_STATUS_ERROR1 0x74 ++#define NAND_CMD_STATUS_ERROR2 0x75 ++#define NAND_CMD_STATUS_ERROR3 0x76 ++#define NAND_CMD_STATUS_RESET 0x7f ++#define NAND_CMD_STATUS_CLEAR 0xff ++ ++/* Status bits */ ++#define NAND_STATUS_FAIL 0x01 ++#define NAND_STATUS_FAIL_N1 0x02 ++#define NAND_STATUS_TRUE_READY 0x20 ++#define NAND_STATUS_READY 0x40 ++#define NAND_STATUS_WP 0x80 ++ ++/* ++ * Constants for ECC_MODES ++ */ ++ ++/* No ECC. Usage is not recommended ! */ ++#define NAND_ECC_NONE 0 ++/* Software ECC 3 byte ECC per 256 Byte data */ ++#define NAND_ECC_SOFT 1 ++/* Hardware ECC 3 byte ECC per 256 Byte data */ ++#define NAND_ECC_HW3_256 2 ++/* Hardware ECC 3 byte ECC per 512 Byte data */ ++#define NAND_ECC_HW3_512 3 ++/* Hardware ECC 3 byte ECC per 512 Byte data */ ++#define NAND_ECC_HW6_512 4 ++/* Hardware ECC 8 byte ECC per 512 Byte data */ ++#define NAND_ECC_HW8_512 6 ++/* Hardware ECC 12 byte ECC per 2048 Byte data */ ++#define NAND_ECC_HW12_2048 7 ++ ++/* ++ * Constants for Hardware ECC ++ */ ++/* Reset Hardware ECC for read */ ++#define NAND_ECC_READ 0 ++/* Reset Hardware ECC for write */ ++#define NAND_ECC_WRITE 1 ++/* Enable Hardware ECC before syndrom is read back from flash */ ++#define NAND_ECC_READSYN 2 ++ ++/* Bit mask for flags passed to do_nand_read_ecc */ ++#define NAND_GET_DEVICE 0x80 ++ ++ ++/* Option constants for bizarre disfunctionality and real ++* features ++*/ ++/* Chip can not auto increment pages */ ++#define NAND_NO_AUTOINCR 0x00000001 ++/* Buswitdh is 16 bit */ ++#define NAND_BUSWIDTH_16 0x00000002 ++/* Device supports partial programming without padding */ ++#define NAND_NO_PADDING 0x00000004 ++/* Chip has cache program function */ ++#define NAND_CACHEPRG 0x00000008 ++/* Chip has copy back function */ ++#define NAND_COPYBACK 0x00000010 ++/* AND Chip which has 4 banks and a confusing page / block ++ * assignment. See Renesas datasheet for further information */ ++#define NAND_IS_AND 0x00000020 ++/* Chip has a array of 4 pages which can be read without ++ * additional ready /busy waits */ ++#define NAND_4PAGE_ARRAY 0x00000040 ++/* Chip requires that BBT is periodically rewritten to prevent ++ * bits from adjacent blocks from 'leaking' in altering data. ++ * This happens with the Renesas AG-AND chips, possibly others. */ ++#define BBT_AUTO_REFRESH 0x00000080 ++ ++/* Options valid for Samsung large page devices */ ++#define NAND_SAMSUNG_LP_OPTIONS \ ++ (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) ++ ++/* Macros to identify the above */ ++#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) ++#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) ++#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) ++#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) ++ ++/* Mask to zero out the chip options, which come from the id table */ ++#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) ++ ++/* Non chip related options */ ++/* Use a flash based bad block table. This option is passed to the ++ * default bad block table function. */ ++#define NAND_USE_FLASH_BBT 0x00010000 ++/* The hw ecc generator provides a syndrome instead a ecc value on read ++ * This can only work if we have the ecc bytes directly behind the ++ * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ ++#define NAND_HWECC_SYNDROME 0x00020000 ++/* This option skips the bbt scan during initialization. */ ++#define NAND_SKIP_BBTSCAN 0x00040000 ++ ++/* Options set by nand scan */ ++/* Nand scan has allocated oob_buf */ ++#define NAND_OOBBUF_ALLOC 0x40000000 ++/* Nand scan has allocated data_buf */ ++#define NAND_DATABUF_ALLOC 0x80000000 ++ ++ ++/* ++ * nand_state_t - chip states ++ * Enumeration for NAND flash chip state ++ */ ++typedef enum { ++ FL_READY, ++ FL_READING, ++ FL_WRITING, ++ FL_ERASING, ++ FL_SYNCING, ++ FL_CACHEDPRG, ++ FL_PM_SUSPENDED, ++} nand_state_t; ++ ++/* Keep gcc happy */ ++struct nand_chip; ++ ++/** ++ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices ++ * @lock: protection lock ++ * @active: the mtd device which holds the controller currently ++ * @wq: wait queue to sleep on if a NAND operation is in progress ++ * used instead of the per chip wait queue when a hw controller is available ++ */ ++#if NAND_HWECC_SUPPORT ++struct nand_hw_control { ++ spinlock_t lock; ++ struct nand_chip *active; ++ wait_queue_head_t wq; ++}; ++#endif ++ ++/** ++ * struct nand_chip - NAND Private Flash Chip Data ++ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device ++ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device ++ * @read_byte: [REPLACEABLE] read one byte from the chip ++ * @write_byte: [REPLACEABLE] write one byte to the chip ++ * @read_word: [REPLACEABLE] read one word from the chip ++ * @write_word: [REPLACEABLE] write one word to the chip ++ * @write_buf: [REPLACEABLE] write data from the buffer to the chip ++ * @read_buf: [REPLACEABLE] read data from the chip into the buffer ++ * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data ++ * @select_chip: [REPLACEABLE] select chip nr ++ * @block_bad: [REPLACEABLE] check, if the block is bad ++ * @block_markbad: [REPLACEABLE] mark the block bad ++ * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines ++ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line ++ * If set to NULL no access to ready/busy is available and the ready/busy information ++ * is read from the chip status register ++ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip ++ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready ++ * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware ++ * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) ++ * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only ++ * be provided if a hardware ECC is available ++ * @erase_cmd: [INTERN] erase command write function, selectable due to AND support ++ * @scan_bbt: [REPLACEABLE] function to scan bad block table ++ * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines ++ * @eccsize: [INTERN] databytes used per ecc-calculation ++ * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step ++ * @eccsteps: [INTERN] number of ecc calculation steps per page ++ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) ++ * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip ++ * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress ++ * @state: [INTERN] the current state of the NAND device ++ * @page_shift: [INTERN] number of address bits in a page (column address bits) ++ * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock ++ * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry ++ * @chip_shift: [INTERN] number of address bits in one chip ++ * @data_buf: [INTERN] internal buffer for one page + oob ++ * @oob_buf: [INTERN] oob buffer for one eraseblock ++ * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized ++ * @data_poi: [INTERN] pointer to a data buffer ++ * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about ++ * special functionality. See the defines for further explanation ++ * @badblockpos: [INTERN] position of the bad block marker in the oob area ++ * @numchips: [INTERN] number of physical chips ++ * @chipsize: [INTERN] the size of one chip for multichip arrays ++ * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 ++ * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf ++ * @autooob: [REPLACEABLE] the default (auto)placement scheme ++ * @bbt: [INTERN] bad block table pointer ++ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup ++ * @bbt_md: [REPLACEABLE] bad block table mirror descriptor ++ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan ++ * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices ++ * @priv: [OPTIONAL] pointer to private chip date ++ * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks ++ * (determine if errors are correctable) ++ */ ++ ++struct nand_chip { ++ void __iomem *IO_ADDR_R; ++ void __iomem *IO_ADDR_W; ++ ++ u_char (*read_byte)(struct mtd_info *mtd); ++ void (*write_byte)(struct mtd_info *mtd, u_char byte); ++ u16 (*read_word)(struct mtd_info *mtd); ++ void (*write_word)(struct mtd_info *mtd, u16 word); ++ ++ void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len); ++ void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len); ++ int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len); ++ void (*select_chip)(struct mtd_info *mtd, int chip); ++ int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); ++ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); ++ void (*hwcontrol)(struct mtd_info *mtd, int cmd); ++ int (*dev_ready)(struct mtd_info *mtd); ++ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); ++ int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); ++ int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); ++ int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); ++ void (*enable_hwecc)(struct mtd_info *mtd, int mode); ++ void (*erase_cmd)(struct mtd_info *mtd, int page); ++ int (*scan_bbt)(struct mtd_info *mtd); ++ int eccmode; ++ int eccsize; ++ int eccbytes; ++ int eccsteps; ++ int chip_delay; ++#if 0 /* no spinlocks or wait queues in boot loader */ ++ spinlock_t chip_lock; ++ wait_queue_head_t wq; ++#endif ++ nand_state_t state; ++ int page_shift; ++ int phys_erase_shift; ++ int bbt_erase_shift; ++ int chip_shift; ++ u_char *data_buf; ++ u_char *oob_buf; ++ int oobdirty; ++ u_char *data_poi; ++ unsigned int options; ++ int badblockpos; ++ int numchips; ++ unsigned long chipsize; ++ int pagemask; ++ int pagebuf; ++ struct nand_oobinfo *autooob; ++ uint8_t *bbt; ++ struct nand_bbt_descr *bbt_td; ++ struct nand_bbt_descr *bbt_md; ++ struct nand_bbt_descr *badblock_pattern; ++ struct nand_hw_control *controller; ++ void *priv; ++ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); ++}; ++ ++/* ++ * NAND Flash Manufacturer ID Codes ++ */ ++#define NAND_MFR_TOSHIBA 0x98 ++#define NAND_MFR_SAMSUNG 0xec ++#define NAND_MFR_FUJITSU 0x04 ++#define NAND_MFR_NATIONAL 0x8f ++#define NAND_MFR_RENESAS 0x07 ++#define NAND_MFR_STMICRO 0x20 ++#define NAND_MFR_HYNIX 0xad ++ ++/** ++ * struct nand_flash_dev - NAND Flash Device ID Structure ++ * ++ * @name: Identify the device type ++ * @id: device ID code ++ * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 ++ * If the pagesize is 0, then the real pagesize ++ * and the eraseize are determined from the ++ * extended id bytes in the chip ++ * @erasesize: Size of an erase block in the flash device. ++ * @chipsize: Total chipsize in Mega Bytes ++ * @options: Bitfield to store chip relevant options ++ */ ++struct nand_flash_dev { ++ char *name; ++ int id; ++ unsigned long pagesize; ++ unsigned long chipsize; ++ unsigned long erasesize; ++ unsigned long options; ++}; ++ ++/** ++ * struct nand_manufacturers - NAND Flash Manufacturer ID Structure ++ * @name: Manufacturer name ++ * @id: manufacturer ID code of device. ++*/ ++struct nand_manufacturers { ++ int id; ++ char * name; ++}; ++ ++extern struct nand_flash_dev nand_flash_ids[]; ++extern struct nand_manufacturers nand_manuf_ids[]; ++ ++/** ++ * struct nand_bbt_descr - bad block table descriptor ++ * @options: options for this descriptor ++ * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE ++ * when bbt is searched, then we store the found bbts pages here. ++ * Its an array and supports up to 8 chips now ++ * @offs: offset of the pattern in the oob area of the page ++ * @veroffs: offset of the bbt version counter in the oob are of the page ++ * @version: version read from the bbt page during scan ++ * @len: length of the pattern, if 0 no pattern check is performed ++ * @maxblocks: maximum number of blocks to search for a bbt. This number of ++ * blocks is reserved at the end of the device where the tables are ++ * written. ++ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than ++ * bad) block in the stored bbt ++ * @pattern: pattern to identify bad block table or factory marked good / ++ * bad blocks, can be NULL, if len = 0 ++ * ++ * Descriptor for the bad block table marker and the descriptor for the ++ * pattern which identifies good and bad blocks. The assumption is made ++ * that the pattern and the version count are always located in the oob area ++ * of the first block. ++ */ ++struct nand_bbt_descr { ++ int options; ++ int pages[NAND_MAX_CHIPS]; ++ int offs; ++ int veroffs; ++ uint8_t version[NAND_MAX_CHIPS]; ++ int len; ++ int maxblocks; ++ int reserved_block_code; ++ uint8_t *pattern; ++}; ++ ++/* Options for the bad block table descriptors */ ++ ++/* The number of bits used per block in the bbt on the device */ ++#define NAND_BBT_NRBITS_MSK 0x0000000F ++#define NAND_BBT_1BIT 0x00000001 ++#define NAND_BBT_2BIT 0x00000002 ++#define NAND_BBT_4BIT 0x00000004 ++#define NAND_BBT_8BIT 0x00000008 ++/* The bad block table is in the last good block of the device */ ++#define NAND_BBT_LASTBLOCK 0x00000010 ++/* The bbt is at the given page, else we must scan for the bbt */ ++#define NAND_BBT_ABSPAGE 0x00000020 ++/* The bbt is at the given page, else we must scan for the bbt */ ++#define NAND_BBT_SEARCH 0x00000040 ++/* bbt is stored per chip on multichip devices */ ++#define NAND_BBT_PERCHIP 0x00000080 ++/* bbt has a version counter at offset veroffs */ ++#define NAND_BBT_VERSION 0x00000100 ++/* Create a bbt if none axists */ ++#define NAND_BBT_CREATE 0x00000200 ++/* Search good / bad pattern through all pages of a block */ ++#define NAND_BBT_SCANALLPAGES 0x00000400 ++/* Scan block empty during good / bad block scan */ ++#define NAND_BBT_SCANEMPTY 0x00000800 ++/* Write bbt if neccecary */ ++#define NAND_BBT_WRITE 0x00001000 ++/* Read and write back block contents when writing bbt */ ++#define NAND_BBT_SAVECONTENT 0x00002000 ++/* Search good / bad pattern on the first and the second page */ ++#define NAND_BBT_SCAN2NDPAGE 0x00004000 ++ ++/* The maximum number of blocks to scan for a bbt */ ++#define NAND_BBT_SCAN_MAXBLOCKS 4 ++ ++extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd); ++extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs); ++extern int nand_default_bbt (struct mtd_info *mtd); ++extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); ++extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); ++extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, ++ size_t * retlen, u_char * buf, u_char * oob_buf, ++ struct nand_oobinfo *oobsel, int flags); ++ ++/* ++* Constants for oob configuration ++*/ ++#define NAND_SMALL_BADBLOCK_POS 5 ++#define NAND_LARGE_BADBLOCK_POS 0 ++ ++#endif /* __LINUX_MTD_NAND_H */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_base.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_base.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_base.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_base.c 2006-11-10 09:55:58.000000000 +0100 +@@ -0,0 +1,2910 @@ ++/* ++ * Snitched from drivers/mtd/nand_base.c ++ * Modified to run outside Linux. ++ * #if 0'd to remove non-essential functionality ++ * ++ * Overview: ++ * This is the generic MTD driver for NAND flash devices. It should be ++ * capable of working with almost all NAND chips currently available. ++ * Basic support for AG-AND chips is provided. ++ * ++ * Additional technical information is available on ++ * http://www.linux-mtd.infradead.org/tech/nand.html ++ * ++ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) ++ * 2002 Thomas Gleixner (tglx@linutronix.de) ++ * ++ * 02-08-2004 tglx: support for strange chips, which cannot auto increment ++ * pages on read / read_oob ++ * ++ * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes ++ * pointed this out, as he marked an auto increment capable chip ++ * as NOAUTOINCR in the board driver. ++ * Make reads over block boundaries work too ++ * ++ * 04-14-2004 tglx: first working version for 2k page size chips ++ * ++ * 05-19-2004 tglx: Basic support for Renesas AG-AND chips ++ * ++ * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared ++ * among multiple independend devices. Suggestions and initial patch ++ * from Ben Dooks <ben-mtd@fluff.org> ++ * ++ * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue. ++ * Basically, any block not rewritten may lose data when surrounding blocks ++ * are rewritten many times. JFFS2 ensures this doesn't happen for blocks ++ * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they ++ * do not lose data, force them to be rewritten when some of the surrounding ++ * blocks are erased. Rather than tracking a specific nearby block (which ++ * could itself go bad), use a page address 'mask' to select several blocks ++ * in the same area, and rewrite the BBT when any of them are erased. ++ * ++ * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas ++ * AG-AND chips. If there was a sudden loss of power during an erase operation, ++ * a "device recovery" operation must be performed when power is restored ++ * to ensure correct operation. ++ * ++ * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to ++ * perform extra error status checks on erase and write failures. This required ++ * adding a wrapper function for nand_read_ecc. ++ * ++ * 08-20-2005 vwool: suspend/resume added ++ * ++ * Credits: ++ * David Woodhouse for adding multichip support ++ * ++ * Aleph One Ltd. and Toby Churchill Ltd. for supporting the ++ * rework for 2K page size chips ++ * ++ * TODO: ++ * Enable cached programming for 2k page size chips ++ * Check, if mtd->ecctype should be set to MTD_ECC_HW ++ * if we have HW ecc support. ++ * The AG-AND chips have nice features for speed improvement, ++ * which are not supported yet. Read / program 4 pages in one go. ++ * ++ * $Id: nand_base.c,v 1.11 2006/11/10 08:55:58 ricardw Exp $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/errno.h> ++#if 0 ++#include <linux/sched.h> ++#include <linux/slab.h> ++#endif ++ ++#include "mtd.h" ++#include "nand.h" ++#include "nand_ecc.h" ++ ++#if 0 ++#include <linux/mtd/compatmac.h> ++#include <linux/interrupt.h> ++#include <linux/bitops.h> ++#include <asm/io.h> ++#endif ++ ++#ifdef CONFIG_MTD_PARTITIONS ++#include <linux/mtd/partitions.h> ++ ++#endif ++ ++#include "lib.h" ++ ++#define GPIO_SYNC 0 ++ ++#undef DEBUG /* from mtd.h */ ++#define DEBUG(n, args...) do { } while(0) ++ ++#define D(x) ++ ++/* Define default oob placement schemes for large and small page devices */ ++static struct nand_oobinfo nand_oob_8 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 3, ++ .eccpos = {0, 1, 2}, ++ .oobfree = { {3, 2}, {6, 2} } ++}; ++ ++static struct nand_oobinfo nand_oob_16 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 6, ++ .eccpos = {0, 1, 2, 3, 6, 7}, ++ .oobfree = { {8, 8} } ++}; ++ ++static struct nand_oobinfo nand_oob_64 = { ++ .useecc = MTD_NANDECC_AUTOPLACE, ++ .eccbytes = 24, ++ .eccpos = { ++ 40, 41, 42, 43, 44, 45, 46, 47, ++ 48, 49, 50, 51, 52, 53, 54, 55, ++ 56, 57, 58, 59, 60, 61, 62, 63}, ++ .oobfree = { {2, 38} } ++}; ++ ++/* This is used for padding purposes in nand_write_oob */ ++#if NAND_WRITE_SUPPORT ++static u_char ffchars[] = { ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, ++}; ++#endif ++ ++/* ++ * NAND low-level MTD interface functions ++ */ ++static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); ++static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); ++static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); ++ ++static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); ++static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, ++ size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); ++static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf); ++static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf); ++static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, ++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel); ++static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf); ++#if NAND_KVEC_SUPPORT ++static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, ++ unsigned long count, loff_t to, size_t * retlen); ++static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, ++ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); ++#endif ++static int nand_erase (struct mtd_info *mtd, struct erase_info *instr); ++static void nand_sync (struct mtd_info *mtd); ++ ++/* Some internal functions */ ++static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf, ++ struct nand_oobinfo *oobsel, int mode); ++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, ++ u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode); ++#else ++#define nand_verify_pages(...) (0) ++#endif ++ ++static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state); ++ ++/** ++ * nand_release_device - [GENERIC] release chip ++ * @mtd: MTD device structure ++ * ++ * Deselect, release chip lock and wake up anyone waiting on the device ++ */ ++static void nand_release_device (struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ /* De-select the NAND device */ ++ this->select_chip(mtd, -1); ++#if 0 ++ ++ if (this->controller) { ++ /* Release the controller and the chip */ ++ spin_lock(&this->controller->lock); ++ this->controller->active = NULL; ++ this->state = FL_READY; ++ wake_up(&this->controller->wq); ++ spin_unlock(&this->controller->lock); ++ } else { ++ /* Release the chip */ ++ spin_lock(&this->chip_lock); ++ this->state = FL_READY; ++ wake_up(&this->wq); ++ spin_unlock(&this->chip_lock); ++ } ++#endif ++} ++ ++/** ++ * nand_read_byte - [DEFAULT] read one byte from the chip ++ * @mtd: MTD device structure ++ * ++ * Default read function for 8bit buswith ++ */ ++static u_char nand_read_byte(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ return readb(this->IO_ADDR_R); ++} ++ ++/** ++ * nand_write_byte - [DEFAULT] write one byte to the chip ++ * @mtd: MTD device structure ++ * @byte: pointer to data byte to write ++ * ++ * Default write function for 8it buswith ++ */ ++static void nand_write_byte(struct mtd_info *mtd, u_char byte) ++{ ++ struct nand_chip *this = mtd->priv; ++ writeb(byte, this->IO_ADDR_W); ++ ++#if GPIO_SYNC ++ /* Bus sync: Read from address we just wrote. ++ * This generates no signal to the NAND flash, since only chip ++ * select lines are pulled out to the chip, and read is not ++ * gated with chip select for the write area. ++ * Turns out this is (probably) the wrong way to do it; the ++ * right way is to set up suitable wait states in the kernel ++ * config (CONFIG_ETRAX_MEM_GRP3_CONFIG). ++ */ ++ (void) readb(this->IO_ADDR_W); /* that's right, IO_ADDR_W */ ++#endif ++} ++ ++/** ++ * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip ++ * @mtd: MTD device structure ++ * ++ * Default read function for 16bit buswith with ++ * endianess conversion ++ */ ++static u_char nand_read_byte16(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ return (u_char) cpu_to_le16(readw(this->IO_ADDR_R)); ++} ++ ++/** ++ * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip ++ * @mtd: MTD device structure ++ * @byte: pointer to data byte to write ++ * ++ * Default write function for 16bit buswith with ++ * endianess conversion ++ */ ++static void nand_write_byte16(struct mtd_info *mtd, u_char byte) ++{ ++ struct nand_chip *this = mtd->priv; ++ writew(le16_to_cpu((u16) byte), this->IO_ADDR_W); ++} ++ ++/** ++ * nand_read_word - [DEFAULT] read one word from the chip ++ * @mtd: MTD device structure ++ * ++ * Default read function for 16bit buswith without ++ * endianess conversion ++ */ ++static u16 nand_read_word(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ return readw(this->IO_ADDR_R); ++} ++ ++/** ++ * nand_write_word - [DEFAULT] write one word to the chip ++ * @mtd: MTD device structure ++ * @word: data word to write ++ * ++ * Default write function for 16bit buswith without ++ * endianess conversion ++ */ ++static void nand_write_word(struct mtd_info *mtd, u16 word) ++{ ++ struct nand_chip *this = mtd->priv; ++ writew(word, this->IO_ADDR_W); ++} ++ ++/** ++ * nand_select_chip - [DEFAULT] control CE line ++ * @mtd: MTD device structure ++ * @chip: chipnumber to select, -1 for deselect ++ * ++ * Default select function for 1 chip devices. ++ */ ++static void nand_select_chip(struct mtd_info *mtd, int chip) ++{ ++ struct nand_chip *this = mtd->priv; ++ switch(chip) { ++ case -1: ++ this->hwcontrol(mtd, NAND_CTL_CLRNCE); ++ break; ++ case 0: ++ this->hwcontrol(mtd, NAND_CTL_SETNCE); ++ break; ++ ++ default: ++ BUG(); ++ } ++} ++ ++/** ++ * nand_write_buf - [DEFAULT] write buffer to chip ++ * @mtd: MTD device structure ++ * @buf: data buffer ++ * @len: number of bytes to write ++ * ++ * Default write function for 8bit buswith ++ */ ++static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ ++ for (i=0; i<len; i++) ++ writeb(buf[i], this->IO_ADDR_W); ++} ++ ++/** ++ * nand_read_buf - [DEFAULT] read chip data into buffer ++ * @mtd: MTD device structure ++ * @buf: buffer to store date ++ * @len: number of bytes to read ++ * ++ * Default read function for 8bit buswith ++ */ ++static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ ++ for (i=0; i<len; i++) ++ buf[i] = readb(this->IO_ADDR_R); ++} ++ ++/** ++ * nand_verify_buf - [DEFAULT] Verify chip data against buffer ++ * @mtd: MTD device structure ++ * @buf: buffer containing the data to compare ++ * @len: number of bytes to compare ++ * ++ * Default verify function for 8bit buswith ++ */ ++static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ ++ for (i=0; i<len; i++) ++ if (buf[i] != readb(this->IO_ADDR_R)) ++ return -EFAULT; ++ ++ return 0; ++} ++ ++/** ++ * nand_write_buf16 - [DEFAULT] write buffer to chip ++ * @mtd: MTD device structure ++ * @buf: data buffer ++ * @len: number of bytes to write ++ * ++ * Default write function for 16bit buswith ++ */ ++static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ u16 *p = (u16 *) buf; ++ len >>= 1; ++ ++ for (i=0; i<len; i++) ++ writew(p[i], this->IO_ADDR_W); ++ ++} ++ ++/** ++ * nand_read_buf16 - [DEFAULT] read chip data into buffer ++ * @mtd: MTD device structure ++ * @buf: buffer to store date ++ * @len: number of bytes to read ++ * ++ * Default read function for 16bit buswith ++ */ ++static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ u16 *p = (u16 *) buf; ++ len >>= 1; ++ ++ for (i=0; i<len; i++) ++ p[i] = readw(this->IO_ADDR_R); ++} ++ ++/** ++ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer ++ * @mtd: MTD device structure ++ * @buf: buffer containing the data to compare ++ * @len: number of bytes to compare ++ * ++ * Default verify function for 16bit buswith ++ */ ++static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) ++{ ++ int i; ++ struct nand_chip *this = mtd->priv; ++ u16 *p = (u16 *) buf; ++ len >>= 1; ++ ++ for (i=0; i<len; i++) ++ if (p[i] != readw(this->IO_ADDR_R)) ++ return -EFAULT; ++ ++ return 0; ++} ++ ++/** ++ * nand_block_bad - [DEFAULT] Read bad block marker from the chip ++ * @mtd: MTD device structure ++ * @ofs: offset from device start ++ * @getchip: 0, if the chip is already selected ++ * ++ * Check, if the block is bad. ++ */ ++static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) ++{ ++ int page, chipnr, res = 0; ++ struct nand_chip *this = mtd->priv; ++ u16 bad; ++ ++ if (getchip) { ++ page = (int)(ofs >> this->page_shift); ++ chipnr = (int)(ofs >> this->chip_shift); ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd, FL_READING); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ } else ++ page = (int) ofs; ++ ++ if (this->options & NAND_BUSWIDTH_16) { ++ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask); ++ bad = cpu_to_le16(this->read_word(mtd)); ++ if (this->badblockpos & 0x1) ++ bad >>= 8; ++ if ((bad & 0xFF) != 0xff) ++ res = 1; ++ } else { ++ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask); ++ if (this->read_byte(mtd) != 0xff) ++ res = 1; ++ } ++ ++ if (getchip) { ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ } ++ ++ return res; ++} ++ ++/** ++ * nand_default_block_markbad - [DEFAULT] mark a block bad ++ * @mtd: MTD device structure ++ * @ofs: offset from device start ++ * ++ * This is the default implementation, which can be overridden by ++ * a hardware specific driver. ++*/ ++#if NAND_WRITE_SUPPORT ++static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_chip *this = mtd->priv; ++ u_char buf[2] = {0, 0}; ++ size_t retlen; ++ int block; ++ ++ /* Get block number */ ++ block = ((int) ofs) >> this->bbt_erase_shift; ++ if (this->bbt) ++ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); ++ ++#if NAND_BBT_SUPPORT ++ /* Do we have a flash based bad block table ? */ ++ if (this->options & NAND_USE_FLASH_BBT) ++ return nand_update_bbt (mtd, ofs); ++#endif ++ ++ /* We write two bytes, so we dont have to mess with 16 bit access */ ++ ofs += mtd->oobsize + (this->badblockpos & ~0x01); ++ return nand_write_oob (mtd, ofs , 2, &retlen, buf); ++} ++#endif ++ ++/** ++ * nand_check_wp - [GENERIC] check if the chip is write protected ++ * @mtd: MTD device structure ++ * Check, if the device is write protected ++ * ++ * The function expects, that the device is already selected ++ */ ++#if NAND_WRITE_SUPPORT ++static int nand_check_wp (struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ /* Check the WP bit */ ++ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); ++ return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1; ++} ++#endif ++ ++/** ++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad ++ * @mtd: MTD device structure ++ * @ofs: offset from device start ++ * @getchip: 0, if the chip is already selected ++ * @allowbbt: 1, if its allowed to access the bbt area ++ * ++ * Check, if the block is bad. Either by reading the bad block table or ++ * calling of the scan function. ++ */ ++static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (!this->bbt) ++ return this->block_bad(mtd, ofs, getchip); ++ ++#if NAND_BBT_SUPPORT ++ /* Return info from the table */ ++ return nand_isbad_bbt (mtd, ofs, allowbbt); ++#endif ++ BUG(); /* should not happen */ ++} ++ ++/* ++ * Wait for the ready pin, after a command ++ * The timeout is catched later. ++ */ ++static void nand_wait_ready(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++#if 0 ++ unsigned long timeo = jiffies + 2; ++#endif ++ ++ /* wait until command is processed or timeout occures */ ++ do { ++ if (this->dev_ready(mtd)) ++ return; ++#if 0 ++ touch_softlockup_watchdog(); ++ } while (time_before(jiffies, timeo)); ++#endif ++ } while (1); ++} ++ ++/** ++ * nand_command - [DEFAULT] Send command to NAND device ++ * @mtd: MTD device structure ++ * @command: the command to be sent ++ * @column: the column address for this command, -1 if none ++ * @page_addr: the page address for this command, -1 if none ++ * ++ * Send command to NAND device. This function is used for small page ++ * devices (256/512 Bytes per page) ++ */ ++static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr) ++{ ++ register struct nand_chip *this = mtd->priv; ++ ++ /* Begin command latch cycle */ ++ this->hwcontrol(mtd, NAND_CTL_SETCLE); ++ /* ++ * Write out the command to the device. ++ */ ++ if (command == NAND_CMD_SEQIN) { ++ int readcmd; ++ ++ if (column >= mtd->oobblock) { ++ /* OOB area */ ++ column -= mtd->oobblock; ++ readcmd = NAND_CMD_READOOB; ++ } else if (column < 256) { ++ /* First 256 bytes --> READ0 */ ++ readcmd = NAND_CMD_READ0; ++ } else { ++ column -= 256; ++ readcmd = NAND_CMD_READ1; ++ } ++ this->write_byte(mtd, readcmd); ++ } ++ this->write_byte(mtd, command); ++ ++ /* Set ALE and clear CLE to start address cycle */ ++ this->hwcontrol(mtd, NAND_CTL_CLRCLE); ++ ++ if (column != -1 || page_addr != -1) { ++ this->hwcontrol(mtd, NAND_CTL_SETALE); ++ ++ /* Serially input address */ ++ if (column != -1) { ++ /* Adjust columns for 16 bit buswidth */ ++ if (this->options & NAND_BUSWIDTH_16) ++ column >>= 1; ++ this->write_byte(mtd, column); ++ } ++ if (page_addr != -1) { ++ this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); ++ this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); ++ /* One more address cycle for devices > 32MiB */ ++ if (this->chipsize > (32 << 20)) ++ this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f)); ++ } ++ /* Latch in address */ ++ this->hwcontrol(mtd, NAND_CTL_CLRALE); ++ } ++ ++ /* ++ * program and erase have their own busy handlers ++ * status and sequential in needs no delay ++ */ ++ switch (command) { ++ ++ case NAND_CMD_PAGEPROG: ++ case NAND_CMD_ERASE1: ++ case NAND_CMD_ERASE2: ++ case NAND_CMD_SEQIN: ++ case NAND_CMD_STATUS: ++ return; ++ ++ case NAND_CMD_RESET: ++ if (this->dev_ready) ++ break; ++ udelay(this->chip_delay); ++ this->hwcontrol(mtd, NAND_CTL_SETCLE); ++ this->write_byte(mtd, NAND_CMD_STATUS); ++ this->hwcontrol(mtd, NAND_CTL_CLRCLE); ++ while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); ++ return; ++ ++ /* This applies to read commands */ ++ default: ++ /* ++ * If we don't have access to the busy pin, we apply the given ++ * command delay ++ */ ++ if (!this->dev_ready) { ++ udelay (this->chip_delay); ++ return; ++ } ++ } ++ /* Apply this short delay always to ensure that we do wait tWB in ++ * any case on any machine. */ ++ ndelay (100); ++ ++ nand_wait_ready(mtd); ++} ++ ++/** ++ * nand_command_lp - [DEFAULT] Send command to NAND large page device ++ * @mtd: MTD device structure ++ * @command: the command to be sent ++ * @column: the column address for this command, -1 if none ++ * @page_addr: the page address for this command, -1 if none ++ * ++ * Send command to NAND device. This is the version for the new large page devices ++ * We dont have the seperate regions as we have in the small page devices. ++ * We must emulate NAND_CMD_READOOB to keep the code compatible. ++ * ++ */ ++static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr) ++{ ++ register struct nand_chip *this = mtd->priv; ++ ++ /* Emulate NAND_CMD_READOOB */ ++ if (command == NAND_CMD_READOOB) { ++ column += mtd->oobblock; ++ command = NAND_CMD_READ0; ++ } ++ ++ ++ /* Begin command latch cycle */ ++ this->hwcontrol(mtd, NAND_CTL_SETCLE); ++ /* Write out the command to the device. */ ++ this->write_byte(mtd, (command & 0xff)); ++ /* End command latch cycle */ ++ this->hwcontrol(mtd, NAND_CTL_CLRCLE); ++ ++ if (column != -1 || page_addr != -1) { ++ this->hwcontrol(mtd, NAND_CTL_SETALE); ++ ++ /* Serially input address */ ++ if (column != -1) { ++ /* Adjust columns for 16 bit buswidth */ ++ if (this->options & NAND_BUSWIDTH_16) ++ column >>= 1; ++ this->write_byte(mtd, column & 0xff); ++ this->write_byte(mtd, column >> 8); ++ } ++ if (page_addr != -1) { ++ this->write_byte(mtd, (unsigned char) (page_addr & 0xff)); ++ this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff)); ++ /* One more address cycle for devices > 128MiB */ ++ if (this->chipsize > (128 << 20)) ++ this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff)); ++ } ++ /* Latch in address */ ++ this->hwcontrol(mtd, NAND_CTL_CLRALE); ++ } ++ ++ /* ++ * program and erase have their own busy handlers ++ * status, sequential in, and deplete1 need no delay ++ */ ++ switch (command) { ++ ++ case NAND_CMD_CACHEDPROG: ++ case NAND_CMD_PAGEPROG: ++ case NAND_CMD_ERASE1: ++ case NAND_CMD_ERASE2: ++ case NAND_CMD_SEQIN: ++ case NAND_CMD_STATUS: ++ case NAND_CMD_DEPLETE1: ++ return; ++ ++ /* ++ * read error status commands require only a short delay ++ */ ++ case NAND_CMD_STATUS_ERROR: ++ case NAND_CMD_STATUS_ERROR0: ++ case NAND_CMD_STATUS_ERROR1: ++ case NAND_CMD_STATUS_ERROR2: ++ case NAND_CMD_STATUS_ERROR3: ++ udelay(this->chip_delay); ++ return; ++ ++ case NAND_CMD_RESET: ++ if (this->dev_ready) ++ break; ++ udelay(this->chip_delay); ++ this->hwcontrol(mtd, NAND_CTL_SETCLE); ++ this->write_byte(mtd, NAND_CMD_STATUS); ++ this->hwcontrol(mtd, NAND_CTL_CLRCLE); ++ while ( !(this->read_byte(mtd) & NAND_STATUS_READY)); ++ return; ++ ++ case NAND_CMD_READ0: ++ /* Begin command latch cycle */ ++ this->hwcontrol(mtd, NAND_CTL_SETCLE); ++ /* Write out the start read command */ ++ this->write_byte(mtd, NAND_CMD_READSTART); ++ /* End command latch cycle */ ++ this->hwcontrol(mtd, NAND_CTL_CLRCLE); ++ /* Fall through into ready check */ ++ ++ /* This applies to read commands */ ++ default: ++ /* ++ * If we don't have access to the busy pin, we apply the given ++ * command delay ++ */ ++ if (!this->dev_ready) { ++ udelay (this->chip_delay); ++ return; ++ } ++ } ++ ++ /* Apply this short delay always to ensure that we do wait tWB in ++ * any case on any machine. */ ++ ndelay (100); ++ ++ nand_wait_ready(mtd); ++} ++ ++/** ++ * nand_get_device - [GENERIC] Get chip for selected access ++ * @this: the nand chip descriptor ++ * @mtd: MTD device structure ++ * @new_state: the state which is requested ++ * ++ * Get the device and lock it for exclusive access ++ */ ++static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state) ++{ ++ this->state = new_state; ++ return 0; ++#if 0 ++ struct nand_chip *active; ++ spinlock_t *lock; ++ wait_queue_head_t *wq; ++ DECLARE_WAITQUEUE (wait, current); ++ ++ lock = (this->controller) ? &this->controller->lock : &this->chip_lock; ++ wq = (this->controller) ? &this->controller->wq : &this->wq; ++retry: ++ active = this; ++ spin_lock(lock); ++ ++ /* Hardware controller shared among independend devices */ ++ if (this->controller) { ++ if (this->controller->active) ++ active = this->controller->active; ++ else ++ this->controller->active = this; ++ } ++ if (active == this && this->state == FL_READY) { ++ this->state = new_state; ++ spin_unlock(lock); ++ return 0; ++ } ++ if (new_state == FL_PM_SUSPENDED) { ++ spin_unlock(lock); ++ return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN; ++ } ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ add_wait_queue(wq, &wait); ++ spin_unlock(lock); ++ schedule(); ++ remove_wait_queue(wq, &wait); ++ goto retry; ++#endif ++} ++ ++/** ++ * nand_wait - [DEFAULT] wait until the command is done ++ * @mtd: MTD device structure ++ * @this: NAND chip structure ++ * @state: state to select the max. timeout value ++ * ++ * Wait for command done. This applies to erase and program only ++ * Erase can take up to 400ms and program up to 20ms according to ++ * general NAND and SmartMedia specs ++ * ++*/ ++static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state) ++{ ++ ++#if 0 ++ unsigned long timeo = jiffies; ++#endif ++ int status; ++ ++#if 0 ++ if (state == FL_ERASING) ++ timeo += (HZ * 400) / 1000; ++ else ++ timeo += (HZ * 20) / 1000; ++#endif ++ ++ /* Apply this short delay always to ensure that we do wait tWB in ++ * any case on any machine. */ ++ ndelay (100); ++ ++ if ((state == FL_ERASING) && (this->options & NAND_IS_AND)) ++ this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1); ++ else ++ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1); ++ ++#if 0 ++ while (time_before(jiffies, timeo)) { ++ /* Check, if we were interrupted */ ++ if (this->state != state) ++ return 0; ++#endif ++ while (1) { /* wait indefinitely */ ++ ++ if (this->dev_ready) { ++ if (this->dev_ready(mtd)) ++ break; ++ } else { ++ if (this->read_byte(mtd) & NAND_STATUS_READY) ++ break; ++ } ++ ++#if 0 ++ cond_resched(); ++#endif ++ } ++ status = (int) this->read_byte(mtd); ++ return status; ++} ++ ++/** ++ * nand_write_page - [GENERIC] write one page ++ * @mtd: MTD device structure ++ * @this: NAND chip structure ++ * @page: startpage inside the chip, must be called with (page & this->pagemask) ++ * @oob_buf: out of band data buffer ++ * @oobsel: out of band selecttion structre ++ * @cached: 1 = enable cached programming if supported by chip ++ * ++ * Nand_page_program function is used for write and writev ! ++ * This function will always program a full page of data ++ * If you call it with a non page aligned buffer, you're lost :) ++ * ++ * Cached programming is not supported yet. ++ */ ++#if NAND_WRITE_SUPPORT ++static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, ++ u_char *oob_buf, struct nand_oobinfo *oobsel, int cached) ++{ ++ int i, status; ++ u_char ecc_code[32]; ++ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; ++ int *oob_config = oobsel->eccpos; ++ int datidx = 0, eccidx = 0, eccsteps = this->eccsteps; ++ int eccbytes = 0; ++ ++ /* FIXME: Enable cached programming */ ++ cached = 0; ++ ++ /* Send command to begin auto page programming */ ++ this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page); ++ ++ /* Write out complete page of data, take care of eccmode */ ++ switch (eccmode) { ++ /* No ecc, write all */ ++ case NAND_ECC_NONE: ++ puts ("Writing data without ECC to NAND-FLASH is not recommended\r\n"); ++ this->write_buf(mtd, this->data_poi, mtd->oobblock); ++ break; ++ ++ /* Software ecc 3/256, write all */ ++ case NAND_ECC_SOFT: ++ for (; eccsteps; eccsteps--) { ++ this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); ++ for (i = 0; i < 3; i++, eccidx++) ++ oob_buf[oob_config[eccidx]] = ecc_code[i]; ++ datidx += this->eccsize; ++ } ++ this->write_buf(mtd, this->data_poi, mtd->oobblock); ++ break; ++ default: ++ eccbytes = this->eccbytes; ++ for (; eccsteps; eccsteps--) { ++ /* enable hardware ecc logic for write */ ++ this->enable_hwecc(mtd, NAND_ECC_WRITE); ++ this->write_buf(mtd, &this->data_poi[datidx], this->eccsize); ++ this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code); ++ for (i = 0; i < eccbytes; i++, eccidx++) ++ oob_buf[oob_config[eccidx]] = ecc_code[i]; ++ /* If the hardware ecc provides syndromes then ++ * the ecc code must be written immidiately after ++ * the data bytes (words) */ ++ if (this->options & NAND_HWECC_SYNDROME) ++ this->write_buf(mtd, ecc_code, eccbytes); ++ datidx += this->eccsize; ++ } ++ break; ++ } ++ ++ /* Write out OOB data */ ++ if (this->options & NAND_HWECC_SYNDROME) ++ this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes); ++ else ++ this->write_buf(mtd, oob_buf, mtd->oobsize); ++ ++ /* Send command to actually program the data */ ++ this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1); ++ ++ if (!cached) { ++ /* call wait ready function */ ++ status = this->waitfunc (mtd, this, FL_WRITING); ++ ++ /* See if operation failed and additional status checks are available */ ++ if ((status & NAND_STATUS_FAIL) && (this->errstat)) { ++ status = this->errstat(mtd, this, FL_WRITING, status, page); ++ } ++ ++ /* See if device thinks it succeeded */ ++ if (status & NAND_STATUS_FAIL) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page); ++ return -EIO; ++ } ++ } else { ++ /* FIXME: Implement cached programming ! */ ++ /* wait until cache is ready*/ ++ // status = this->waitfunc (mtd, this, FL_CACHEDRPG); ++ } ++ return 0; ++} ++#endif ++ ++#if NAND_WRITE_SUPPORT ++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++/** ++ * nand_verify_pages - [GENERIC] verify the chip contents after a write ++ * @mtd: MTD device structure ++ * @this: NAND chip structure ++ * @page: startpage inside the chip, must be called with (page & this->pagemask) ++ * @numpages: number of pages to verify ++ * @oob_buf: out of band data buffer ++ * @oobsel: out of band selecttion structre ++ * @chipnr: number of the current chip ++ * @oobmode: 1 = full buffer verify, 0 = ecc only ++ * ++ * The NAND device assumes that it is always writing to a cleanly erased page. ++ * Hence, it performs its internal write verification only on bits that ++ * transitioned from 1 to 0. The device does NOT verify the whole page on a ++ * byte by byte basis. It is possible that the page was not completely erased ++ * or the page is becoming unusable due to wear. The read with ECC would catch ++ * the error later when the ECC page check fails, but we would rather catch ++ * it early in the page write stage. Better to write no data than invalid data. ++ */ ++static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages, ++ u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode) ++{ ++ int i, j, datidx = 0, oobofs = 0, res = -EIO; ++ int eccsteps = this->eccsteps; ++ int hweccbytes; ++ u_char oobdata[64]; ++ ++ hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0; ++ ++ /* Send command to read back the first page */ ++ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page); ++ ++ for(;;) { ++ for (j = 0; j < eccsteps; j++) { ++ /* Loop through and verify the data */ ++ if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); ++ goto out; ++ } ++ datidx += mtd->eccsize; ++ /* Have we a hw generator layout ? */ ++ if (!hweccbytes) ++ continue; ++ if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); ++ goto out; ++ } ++ oobofs += hweccbytes; ++ } ++ ++ /* check, if we must compare all data or if we just have to ++ * compare the ecc bytes ++ */ ++ if (oobmode) { ++ if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page); ++ goto out; ++ } ++ } else { ++ /* Read always, else autoincrement fails */ ++ this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps); ++ ++ if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) { ++ int ecccnt = oobsel->eccbytes; ++ ++ for (i = 0; i < ecccnt; i++) { ++ int idx = oobsel->eccpos[i]; ++ if (oobdata[idx] != oob_buf[oobofs + idx] ) { ++ DEBUG (MTD_DEBUG_LEVEL0, ++ "%s: Failed ECC write " ++ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i); ++ goto out; ++ } ++ } ++ } ++ } ++ oobofs += mtd->oobsize - hweccbytes * eccsteps; ++ page++; ++ numpages--; ++ ++ /* Apply delay or wait for ready/busy pin ++ * Do this before the AUTOINCR check, so no problems ++ * arise if a chip which does auto increment ++ * is marked as NOAUTOINCR by the board driver. ++ * Do this also before returning, so the chip is ++ * ready for the next command. ++ */ ++ if (!this->dev_ready) ++ udelay (this->chip_delay); ++ else ++ nand_wait_ready(mtd); ++ ++ /* All done, return happy */ ++ if (!numpages) ++ return 0; ++ ++ ++ /* Check, if the chip supports auto page increment */ ++ if (!NAND_CANAUTOINCR(this)) ++ this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); ++ } ++ /* ++ * Terminate the read command. We come here in case of an error ++ * So we must issue a reset command. ++ */ ++out: ++ this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1); ++ return res; ++} ++#endif ++#endif ++ ++/** ++ * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @len: number of bytes to read ++ * @retlen: pointer to variable to store the number of read bytes ++ * @buf: the databuffer to put data ++ * ++ * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL ++ * and flags = 0xff ++ */ ++static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) ++{ ++ return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff); ++} ++ ++ ++/** ++ * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @len: number of bytes to read ++ * @retlen: pointer to variable to store the number of read bytes ++ * @buf: the databuffer to put data ++ * @oob_buf: filesystem supplied oob data buffer ++ * @oobsel: oob selection structure ++ * ++ * This function simply calls nand_do_read_ecc with flags = 0xff ++ */ ++static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, ++ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel) ++{ ++ /* use userspace supplied oobinfo, if zero */ ++ if (oobsel == NULL) ++ oobsel = &mtd->oobinfo; ++ return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff); ++} ++ ++ ++/** ++ * nand_do_read_ecc - [MTD Interface] Read data with ECC ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @len: number of bytes to read ++ * @retlen: pointer to variable to store the number of read bytes ++ * @buf: the databuffer to put data ++ * @oob_buf: filesystem supplied oob data buffer (can be NULL) ++ * @oobsel: oob selection structure ++ * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed ++ * and how many corrected error bits are acceptable: ++ * bits 0..7 - number of tolerable errors ++ * bit 8 - 0 == do not get/release chip, 1 == get/release chip ++ * ++ * NAND read with ECC ++ */ ++int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len, ++ size_t * retlen, u_char * buf, u_char * oob_buf, ++ struct nand_oobinfo *oobsel, int flags) ++{ ++ ++ int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1; ++ int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0; ++ struct nand_chip *this = mtd->priv; ++ u_char *data_poi, *oob_data = oob_buf; ++ u_char ecc_calc[32]; ++ u_char ecc_code[32]; ++ int eccmode, eccsteps; ++ int *oob_config, datidx; ++ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; ++ int eccbytes; ++ int compareecc = 1; ++ int oobreadlen; ++ ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); ++ D( ++ puts ("nand_read_ecc: from = "); ++ putx (from); ++ puts (", len = "); ++ putx(len); ++ putnl(); ++ ) ++ ++ /* Do not allow reads past end of device */ ++ if ((from + len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n"); ++ D(puts("nand_read_ecc: Attempt read beyond end of device\r\n")); ++ *retlen = 0; ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ if (flags & NAND_GET_DEVICE) ++ nand_get_device (this, mtd, FL_READING); ++ ++ /* Autoplace of oob data ? Use the default placement scheme */ ++ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) ++ oobsel = this->autooob; ++ ++ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE; ++ oob_config = oobsel->eccpos; ++ ++ /* Select the NAND device */ ++ chipnr = (int)(from >> this->chip_shift); ++ this->select_chip(mtd, chipnr); ++ ++ /* First we calculate the starting page */ ++ realpage = (int) (from >> this->page_shift); ++ page = realpage & this->pagemask; ++ ++ /* Get raw starting column */ ++ col = from & (mtd->oobblock - 1); ++ ++ end = mtd->oobblock; ++ ecc = this->eccsize; ++ eccbytes = this->eccbytes; ++ ++ if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME)) ++ compareecc = 0; ++ ++ oobreadlen = mtd->oobsize; ++ if (this->options & NAND_HWECC_SYNDROME) ++ oobreadlen -= oobsel->eccbytes; ++ ++ /* Loop until all data read */ ++ while (read < len) { ++ ++ int aligned = (!col && (len - read) >= end); ++ /* ++ * If the read is not page aligned, we have to read into data buffer ++ * due to ecc, else we read into return buffer direct ++ */ ++ if (aligned) ++ data_poi = &buf[read]; ++ else ++ data_poi = this->data_buf; ++ ++ /* Check, if we have this page in the buffer ++ * ++ * FIXME: Make it work when we must provide oob data too, ++ * check the usage of data_buf oob field ++ */ ++ if (realpage == this->pagebuf && !oob_buf) { ++ /* aligned read ? */ ++ if (aligned) ++ memcpy (data_poi, this->data_buf, end); ++ goto readdata; ++ } ++ ++ /* Check, if we must send the read command */ ++ if (sndcmd) { ++ this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page); ++ sndcmd = 0; ++ } ++ ++ /* get oob area, if we have no oob buffer from fs-driver */ ++ if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE || ++ oobsel->useecc == MTD_NANDECC_AUTOPL_USR) ++ oob_data = &this->data_buf[end]; ++ ++ eccsteps = this->eccsteps; ++ ++ switch (eccmode) { ++ case NAND_ECC_NONE: { /* No ECC, Read in a page */ ++#if 0 ++ static unsigned long lastwhinge = 0; ++ if ((lastwhinge / HZ) != (jiffies / HZ)) { ++ puts ("Reading data from NAND FLASH without ECC is not recommended\r\n"); ++ lastwhinge = jiffies; ++ } ++#endif ++ this->read_buf(mtd, data_poi, end); ++ break; ++ } ++ ++ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */ ++ this->read_buf(mtd, data_poi, end); ++ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc) ++ this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); ++ break; ++ ++ default: ++#if NAND_HWECC_SUPPORT ++ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) { ++ this->enable_hwecc(mtd, NAND_ECC_READ); ++ this->read_buf(mtd, &data_poi[datidx], ecc); ++ ++ /* HW ecc with syndrome calculation must read the ++ * syndrome from flash immidiately after the data */ ++ if (!compareecc) { ++ /* Some hw ecc generators need to know when the ++ * syndrome is read from flash */ ++ this->enable_hwecc(mtd, NAND_ECC_READSYN); ++ this->read_buf(mtd, &oob_data[i], eccbytes); ++ /* We calc error correction directly, it checks the hw ++ * generator for an error, reads back the syndrome and ++ * does the error correction on the fly */ ++ ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]); ++ if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " ++ "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr); ++ ecc_failed++; ++ } ++ } else { ++ this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]); ++ } ++ } ++#endif ++ break; ++ } ++ ++ /* read oobdata */ ++ this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen); ++ ++ /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */ ++ if (!compareecc) ++ goto readoob; ++ ++ /* Pick the ECC bytes out of the oob data */ ++ for (j = 0; j < oobsel->eccbytes; j++) ++ ecc_code[j] = oob_data[oob_config[j]]; ++ ++ /* correct data, if neccecary */ ++ for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) { ++ ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]); ++ ++ /* Get next chunk of ecc bytes */ ++ j += eccbytes; ++ ++ /* Check, if we have a fs supplied oob-buffer, ++ * This is the legacy mode. Used by YAFFS1 ++ * Should go away some day ++ */ ++ if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) { ++ int *p = (int *)(&oob_data[mtd->oobsize]); ++ p[i] = ecc_status; ++ } ++ ++ if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page); ++ D( ++ puts ("nand_read_ecc: " "Failed ECC read, page "); ++ putx (page); ++ putnl(); ++ ) ++ ecc_failed++; ++ } ++ } ++ ++ readoob: ++ /* check, if we have a fs supplied oob-buffer */ ++ if (oob_buf) { ++ /* without autoplace. Legacy mode used by YAFFS1 */ ++ switch(oobsel->useecc) { ++ case MTD_NANDECC_AUTOPLACE: ++ case MTD_NANDECC_AUTOPL_USR: ++ /* Walk through the autoplace chunks */ ++ for (i = 0; oobsel->oobfree[i][1]; i++) { ++ int from = oobsel->oobfree[i][0]; ++ int num = oobsel->oobfree[i][1]; ++ memcpy(&oob_buf[oob], &oob_data[from], num); ++ oob += num; ++ } ++ break; ++ case MTD_NANDECC_PLACE: ++ /* YAFFS1 legacy mode */ ++ oob_data += this->eccsteps * sizeof (int); ++ default: ++ oob_data += mtd->oobsize; ++ } ++ } ++ readdata: ++ /* Partial page read, transfer data into fs buffer */ ++ if (!aligned) { ++ for (j = col; j < end && read < len; j++) ++ buf[read++] = data_poi[j]; ++ this->pagebuf = realpage; ++ } else ++ read += mtd->oobblock; ++ ++ /* Apply delay or wait for ready/busy pin ++ * Do this before the AUTOINCR check, so no problems ++ * arise if a chip which does auto increment ++ * is marked as NOAUTOINCR by the board driver. ++ */ ++ if (!this->dev_ready) ++ udelay (this->chip_delay); ++ else ++ nand_wait_ready(mtd); ++ ++ if (read == len) ++ break; ++ ++ /* For subsequent reads align to page boundary. */ ++ col = 0; ++ /* Increment page address */ ++ realpage++; ++ ++ page = realpage & this->pagemask; ++ /* Check, if we cross a chip boundary */ ++ if (!page) { ++ chipnr++; ++ this->select_chip(mtd, -1); ++ this->select_chip(mtd, chipnr); ++ } ++ /* Check, if the chip supports auto page increment ++ * or if we have hit a block boundary. ++ */ ++ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) ++ sndcmd = 1; ++ } ++ ++ /* Deselect and wake up anyone waiting on the device */ ++ if (flags & NAND_GET_DEVICE) ++ nand_release_device(mtd); ++ ++ /* ++ * Return success, if no ECC failures, else -EBADMSG ++ * fs driver will take care of that, because ++ * retlen == desired len and result == -EBADMSG ++ */ ++ *retlen = read; ++ return ecc_failed ? -EBADMSG : 0; ++} ++ ++/** ++ * nand_read_oob - [MTD Interface] NAND read out-of-band ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @len: number of bytes to read ++ * @retlen: pointer to variable to store the number of read bytes ++ * @buf: the databuffer to put data ++ * ++ * NAND read out-of-band data from the spare area ++ */ ++static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf) ++{ ++ int i, col, page, chipnr; ++ struct nand_chip *this = mtd->priv; ++ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len); ++ ++ /* Shift to get page */ ++ page = (int)(from >> this->page_shift); ++ chipnr = (int)(from >> this->chip_shift); ++ ++ /* Mask to get column */ ++ col = from & (mtd->oobsize - 1); ++ ++ /* Initialize return length value */ ++ *retlen = 0; ++ ++ /* Do not allow reads past end of device */ ++ if ((from + len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n"); ++ *retlen = 0; ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd , FL_READING); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ ++ /* Send the read command */ ++ this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask); ++ /* ++ * Read the data, if we read more than one page ++ * oob data, let the device transfer the data ! ++ */ ++ i = 0; ++ while (i < len) { ++ int thislen = mtd->oobsize - col; ++ thislen = min_t(int, thislen, len); ++ this->read_buf(mtd, &buf[i], thislen); ++ i += thislen; ++ ++ /* Read more ? */ ++ if (i < len) { ++ page++; ++ col = 0; ++ ++ /* Check, if we cross a chip boundary */ ++ if (!(page & this->pagemask)) { ++ chipnr++; ++ this->select_chip(mtd, -1); ++ this->select_chip(mtd, chipnr); ++ } ++ ++ /* Apply delay or wait for ready/busy pin ++ * Do this before the AUTOINCR check, so no problems ++ * arise if a chip which does auto increment ++ * is marked as NOAUTOINCR by the board driver. ++ */ ++ if (!this->dev_ready) ++ udelay (this->chip_delay); ++ else ++ nand_wait_ready(mtd); ++ ++ /* Check, if the chip supports auto page increment ++ * or if we have hit a block boundary. ++ */ ++ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) { ++ /* For subsequent page reads set offset to 0 */ ++ this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask); ++ } ++ } ++ } ++ ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ ++ /* Return happy */ ++ *retlen = len; ++ return 0; ++} ++ ++/** ++ * nand_read_raw - [GENERIC] Read raw data including oob into buffer ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @from: offset to read from ++ * @len: number of bytes to read ++ * @ooblen: number of oob data bytes to read ++ * ++ * Read raw data including oob into buffer ++ */ ++int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen) ++{ ++ struct nand_chip *this = mtd->priv; ++ int page = (int) (from >> this->page_shift); ++ int chip = (int) (from >> this->chip_shift); ++ int sndcmd = 1; ++ int cnt = 0; ++ int pagesize = mtd->oobblock + mtd->oobsize; ++ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1; ++ ++ /* Do not allow reads past end of device */ ++ if ((from + len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n"); ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd , FL_READING); ++ ++ this->select_chip (mtd, chip); ++ ++ /* Add requested oob length */ ++ len += ooblen; ++ ++ while (len) { ++ if (sndcmd) ++ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask); ++ sndcmd = 0; ++ ++ this->read_buf (mtd, &buf[cnt], pagesize); ++ ++ len -= pagesize; ++ cnt += pagesize; ++ page++; ++ ++ if (!this->dev_ready) ++ udelay (this->chip_delay); ++ else ++ nand_wait_ready(mtd); ++ ++ /* Check, if the chip supports auto page increment */ ++ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) ++ sndcmd = 1; ++ } ++ ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ return 0; ++} ++ ++ ++/** ++ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer ++ * @mtd: MTD device structure ++ * @fsbuf: buffer given by fs driver ++ * @oobsel: out of band selection structre ++ * @autoplace: 1 = place given buffer into the oob bytes ++ * @numpages: number of pages to prepare ++ * ++ * Return: ++ * 1. Filesystem buffer available and autoplacement is off, ++ * return filesystem buffer ++ * 2. No filesystem buffer or autoplace is off, return internal ++ * buffer ++ * 3. Filesystem buffer is given and autoplace selected ++ * put data from fs buffer into internal buffer and ++ * retrun internal buffer ++ * ++ * Note: The internal buffer is filled with 0xff. This must ++ * be done only once, when no autoplacement happens ++ * Autoplacement sets the buffer dirty flag, which ++ * forces the 0xff fill before using the buffer again. ++ * ++*/ ++#if NAND_WRITE_SUPPORT ++static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel, ++ int autoplace, int numpages) ++{ ++ struct nand_chip *this = mtd->priv; ++ int i, len, ofs; ++ ++ /* Zero copy fs supplied buffer */ ++ if (fsbuf && !autoplace) ++ return fsbuf; ++ ++ /* Check, if the buffer must be filled with ff again */ ++ if (this->oobdirty) { ++ memset (this->oob_buf, 0xff, ++ mtd->oobsize << (this->phys_erase_shift - this->page_shift)); ++ this->oobdirty = 0; ++ } ++ ++ /* If we have no autoplacement or no fs buffer use the internal one */ ++ if (!autoplace || !fsbuf) ++ return this->oob_buf; ++ ++ /* Walk through the pages and place the data */ ++ this->oobdirty = 1; ++ ofs = 0; ++ while (numpages--) { ++ for (i = 0, len = 0; len < mtd->oobavail; i++) { ++ int to = ofs + oobsel->oobfree[i][0]; ++ int num = oobsel->oobfree[i][1]; ++ memcpy (&this->oob_buf[to], fsbuf, num); ++ len += num; ++ fsbuf += num; ++ } ++ ofs += mtd->oobavail; ++ } ++ return this->oob_buf; ++} ++#endif ++ ++#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0 ++ ++/** ++ * nand_write - [MTD Interface] compability function for nand_write_ecc ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @len: number of bytes to write ++ * @retlen: pointer to variable to store the number of written bytes ++ * @buf: the data to write ++ * ++ * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL ++ * ++*/ ++#if NAND_WRITE_SUPPORT ++static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) ++{ ++ return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL)); ++} ++#endif ++ ++/** ++ * nand_write_ecc - [MTD Interface] NAND write with ECC ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @len: number of bytes to write ++ * @retlen: pointer to variable to store the number of written bytes ++ * @buf: the data to write ++ * @eccbuf: filesystem supplied oob data buffer ++ * @oobsel: oob selection structure ++ * ++ * NAND write with ECC ++ */ ++#if NAND_WRITE_SUPPORT ++static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len, ++ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel) ++{ ++ int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr; ++ int autoplace = 0, numpages, totalpages; ++ struct nand_chip *this = mtd->priv; ++ u_char *oobbuf, *bufstart; ++ int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); ++ ++ /* Initialize retlen, in case of early exit */ ++ *retlen = 0; ++ ++ /* Do not allow write past end of device */ ++ if ((to + len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n"); ++ return -EINVAL; ++ } ++ ++ /* reject writes, which are not page aligned */ ++ if (NOTALIGNED (to) || NOTALIGNED(len)) { ++ puts ("nand_write_ecc: Attempt to write not page aligned data\r\n"); ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd, FL_WRITING); ++ ++ /* Calculate chipnr */ ++ chipnr = (int)(to >> this->chip_shift); ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ ++ /* Check, if it is write protected */ ++ if (nand_check_wp(mtd)) ++ goto out; ++ ++ /* if oobsel is NULL, use chip defaults */ ++ if (oobsel == NULL) ++ oobsel = &mtd->oobinfo; ++ ++ /* Autoplace of oob data ? Use the default placement scheme */ ++ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { ++ oobsel = this->autooob; ++ autoplace = 1; ++ } ++ if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) ++ autoplace = 1; ++ ++ /* Setup variables and oob buffer */ ++ totalpages = len >> this->page_shift; ++ page = (int) (to >> this->page_shift); ++ /* Invalidate the page cache, if we write to the cached page */ ++ if (page <= this->pagebuf && this->pagebuf < (page + totalpages)) ++ this->pagebuf = -1; ++ ++ /* Set it relative to chip */ ++ page &= this->pagemask; ++ startpage = page; ++ /* Calc number of pages we can write in one go */ ++ numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages); ++ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages); ++ bufstart = (u_char *)buf; ++ ++ /* Loop until all data is written */ ++ while (written < len) { ++ ++ this->data_poi = (u_char*) &buf[written]; ++ /* Write one page. If this is the last page to write ++ * or the last page in this block, then use the ++ * real pageprogram command, else select cached programming ++ * if supported by the chip. ++ */ ++ ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0)); ++ if (ret) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret); ++ goto out; ++ } ++ /* Next oob page */ ++ oob += mtd->oobsize; ++ /* Update written bytes count */ ++ written += mtd->oobblock; ++ if (written == len) ++ goto cmp; ++ ++ /* Increment page address */ ++ page++; ++ ++ /* Have we hit a block boundary ? Then we have to verify and ++ * if verify is ok, we have to setup the oob buffer for ++ * the next pages. ++ */ ++ if (!(page & (ppblock - 1))){ ++ int ofs; ++ this->data_poi = bufstart; ++ ret = nand_verify_pages (mtd, this, startpage, ++ page - startpage, ++ oobbuf, oobsel, chipnr, (eccbuf != NULL)); ++ if (ret) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); ++ goto out; ++ } ++ *retlen = written; ++ ++ ofs = autoplace ? mtd->oobavail : mtd->oobsize; ++ if (eccbuf) ++ eccbuf += (page - startpage) * ofs; ++ totalpages -= page - startpage; ++ numpages = min (totalpages, ppblock); ++ page &= this->pagemask; ++ startpage = page; ++ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, ++ autoplace, numpages); ++ oob = 0; ++ /* Check, if we cross a chip boundary */ ++ if (!page) { ++ chipnr++; ++ this->select_chip(mtd, -1); ++ this->select_chip(mtd, chipnr); ++ } ++ } ++ } ++ /* Verify the remaining pages */ ++cmp: ++ this->data_poi = bufstart; ++ ret = nand_verify_pages (mtd, this, startpage, totalpages, ++ oobbuf, oobsel, chipnr, (eccbuf != NULL)); ++ if (!ret) ++ *retlen = written; ++ else ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret); ++ ++out: ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ ++ return ret; ++} ++#endif ++ ++ ++/** ++ * nand_write_oob - [MTD Interface] NAND write out-of-band ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @len: number of bytes to write ++ * @retlen: pointer to variable to store the number of written bytes ++ * @buf: the data to write ++ * ++ * NAND write out-of-band ++ */ ++#if NAND_WRITE_SUPPORT ++static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf) ++{ ++ int column, page, status, ret = -EIO, chipnr; ++ struct nand_chip *this = mtd->priv; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len); ++ ++ /* Shift to get page */ ++ page = (int) (to >> this->page_shift); ++ chipnr = (int) (to >> this->chip_shift); ++ ++ /* Mask to get column */ ++ column = to & (mtd->oobsize - 1); ++ ++ /* Initialize return length value */ ++ *retlen = 0; ++ ++ /* Do not allow write past end of page */ ++ if ((column + len) > mtd->oobsize) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n"); ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd, FL_WRITING); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ ++ /* Reset the chip. Some chips (like the Toshiba TC5832DC found ++ in one of my DiskOnChip 2000 test units) will clear the whole ++ data page too if we don't do this. I have no clue why, but ++ I seem to have 'fixed' it in the doc2000 driver in ++ August 1999. dwmw2. */ ++ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ ++ /* Check, if it is write protected */ ++ if (nand_check_wp(mtd)) ++ goto out; ++ ++ /* Invalidate the page cache, if we write to the cached page */ ++ if (page == this->pagebuf) ++ this->pagebuf = -1; ++ ++ if (NAND_MUST_PAD(this)) { ++ /* Write out desired data */ ++ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask); ++ /* prepad 0xff for partial programming */ ++ this->write_buf(mtd, ffchars, column); ++ /* write data */ ++ this->write_buf(mtd, buf, len); ++ /* postpad 0xff for partial programming */ ++ this->write_buf(mtd, ffchars, mtd->oobsize - (len+column)); ++ } else { ++ /* Write out desired data */ ++ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask); ++ /* write data */ ++ this->write_buf(mtd, buf, len); ++ } ++ /* Send command to program the OOB data */ ++ this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1); ++ ++ status = this->waitfunc (mtd, this, FL_WRITING); ++ ++ /* See if device thinks it succeeded */ ++ if (status & NAND_STATUS_FAIL) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page); ++ ret = -EIO; ++ goto out; ++ } ++ /* Return happy */ ++ *retlen = len; ++ ++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++ /* Send command to read back the data */ ++ this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask); ++ ++ if (this->verify_buf(mtd, buf, len)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page); ++ ret = -EIO; ++ goto out; ++ } ++#endif ++ ret = 0; ++out: ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ ++ return ret; ++} ++#endif ++ ++ ++/** ++ * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc ++ * @mtd: MTD device structure ++ * @vecs: the iovectors to write ++ * @count: number of vectors ++ * @to: offset to write to ++ * @retlen: pointer to variable to store the number of written bytes ++ * ++ * NAND write with kvec. This just calls the ecc function ++ */ ++#if NAND_KVEC_SUPPORT ++#if NAND_WRITE_SUPPORT ++static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, ++ loff_t to, size_t * retlen) ++{ ++ return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL)); ++} ++#endif ++#endif ++ ++/** ++ * nand_writev_ecc - [MTD Interface] write with iovec with ecc ++ * @mtd: MTD device structure ++ * @vecs: the iovectors to write ++ * @count: number of vectors ++ * @to: offset to write to ++ * @retlen: pointer to variable to store the number of written bytes ++ * @eccbuf: filesystem supplied oob data buffer ++ * @oobsel: oob selection structure ++ * ++ * NAND write with iovec with ecc ++ */ ++#if NAND_KVEC_SUPPORT ++#if NAND_WRITE_SUPPORT ++static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, ++ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel) ++{ ++ int i, page, len, total_len, ret = -EIO, written = 0, chipnr; ++ int oob, numpages, autoplace = 0, startpage; ++ struct nand_chip *this = mtd->priv; ++ int ppblock = (1 << (this->phys_erase_shift - this->page_shift)); ++ u_char *oobbuf, *bufstart; ++ ++ /* Preset written len for early exit */ ++ *retlen = 0; ++ ++ /* Calculate total length of data */ ++ total_len = 0; ++ for (i = 0; i < count; i++) ++ total_len += (int) vecs[i].iov_len; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, ++ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count); ++ ++ /* Do not allow write past end of page */ ++ if ((to + total_len) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n"); ++ return -EINVAL; ++ } ++ ++ /* reject writes, which are not page aligned */ ++ if (NOTALIGNED (to) || NOTALIGNED(total_len)) { ++ puts ("nand_write_ecc: Attempt to write not page aligned data\r\n"); ++ return -EINVAL; ++ } ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd, FL_WRITING); ++ ++ /* Get the current chip-nr */ ++ chipnr = (int) (to >> this->chip_shift); ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ ++ /* Check, if it is write protected */ ++ if (nand_check_wp(mtd)) ++ goto out; ++ ++ /* if oobsel is NULL, use chip defaults */ ++ if (oobsel == NULL) ++ oobsel = &mtd->oobinfo; ++ ++ /* Autoplace of oob data ? Use the default placement scheme */ ++ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) { ++ oobsel = this->autooob; ++ autoplace = 1; ++ } ++ if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR) ++ autoplace = 1; ++ ++ /* Setup start page */ ++ page = (int) (to >> this->page_shift); ++ /* Invalidate the page cache, if we write to the cached page */ ++ if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift)) ++ this->pagebuf = -1; ++ ++ startpage = page & this->pagemask; ++ ++ /* Loop until all kvec' data has been written */ ++ len = 0; ++ while (count) { ++ /* If the given tuple is >= pagesize then ++ * write it out from the iov ++ */ ++ if ((vecs->iov_len - len) >= mtd->oobblock) { ++ /* Calc number of pages we can write ++ * out of this iov in one go */ ++ numpages = (vecs->iov_len - len) >> this->page_shift; ++ /* Do not cross block boundaries */ ++ numpages = min (ppblock - (startpage & (ppblock - 1)), numpages); ++ oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); ++ bufstart = (u_char *)vecs->iov_base; ++ bufstart += len; ++ this->data_poi = bufstart; ++ oob = 0; ++ for (i = 1; i <= numpages; i++) { ++ /* Write one page. If this is the last page to write ++ * then use the real pageprogram command, else select ++ * cached programming if supported by the chip. ++ */ ++ ret = nand_write_page (mtd, this, page & this->pagemask, ++ &oobbuf[oob], oobsel, i != numpages); ++ if (ret) ++ goto out; ++ this->data_poi += mtd->oobblock; ++ len += mtd->oobblock; ++ oob += mtd->oobsize; ++ page++; ++ } ++ /* Check, if we have to switch to the next tuple */ ++ if (len >= (int) vecs->iov_len) { ++ vecs++; ++ len = 0; ++ count--; ++ } ++ } else { ++ /* We must use the internal buffer, read data out of each ++ * tuple until we have a full page to write ++ */ ++ int cnt = 0; ++ while (cnt < mtd->oobblock) { ++ if (vecs->iov_base != NULL && vecs->iov_len) ++ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++]; ++ /* Check, if we have to switch to the next tuple */ ++ if (len >= (int) vecs->iov_len) { ++ vecs++; ++ len = 0; ++ count--; ++ } ++ } ++ this->pagebuf = page; ++ this->data_poi = this->data_buf; ++ bufstart = this->data_poi; ++ numpages = 1; ++ oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages); ++ ret = nand_write_page (mtd, this, page & this->pagemask, ++ oobbuf, oobsel, 0); ++ if (ret) ++ goto out; ++ page++; ++ } ++ ++ this->data_poi = bufstart; ++ ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0); ++ if (ret) ++ goto out; ++ ++ written += mtd->oobblock * numpages; ++ /* All done ? */ ++ if (!count) ++ break; ++ ++ startpage = page & this->pagemask; ++ /* Check, if we cross a chip boundary */ ++ if (!startpage) { ++ chipnr++; ++ this->select_chip(mtd, -1); ++ this->select_chip(mtd, chipnr); ++ } ++ } ++ ret = 0; ++out: ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ ++ *retlen = written; ++ return ret; ++} ++#endif ++#endif ++ ++/** ++ * single_erease_cmd - [GENERIC] NAND standard block erase command function ++ * @mtd: MTD device structure ++ * @page: the page address of the block which will be erased ++ * ++ * Standard erase command for NAND chips ++ */ ++#if NAND_ERASE_SUPPORT ++static void single_erase_cmd (struct mtd_info *mtd, int page) ++{ ++ struct nand_chip *this = mtd->priv; ++ /* Send commands to erase a block */ ++ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); ++ this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); ++} ++#endif ++ ++/** ++ * multi_erease_cmd - [GENERIC] AND specific block erase command function ++ * @mtd: MTD device structure ++ * @page: the page address of the block which will be erased ++ * ++ * AND multi block erase command function ++ * Erase 4 consecutive blocks ++ */ ++#if NAND_ERASE_SUPPORT ++static void multi_erase_cmd (struct mtd_info *mtd, int page) ++{ ++ struct nand_chip *this = mtd->priv; ++ /* Send commands to erase a block */ ++ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); ++ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); ++ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++); ++ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page); ++ this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1); ++} ++#endif ++ ++/** ++ * nand_erase - [MTD Interface] erase block(s) ++ * @mtd: MTD device structure ++ * @instr: erase instruction ++ * ++ * Erase one ore more blocks ++ */ ++#if NAND_ERASE_SUPPORT ++static int nand_erase (struct mtd_info *mtd, struct erase_info *instr) ++{ ++ return nand_erase_nand (mtd, instr, 0); ++} ++#endif ++ ++#define BBT_PAGE_MASK 0xffffff3f ++/** ++ * nand_erase_intern - [NAND Interface] erase block(s) ++ * @mtd: MTD device structure ++ * @instr: erase instruction ++ * @allowbbt: allow erasing the bbt area ++ * ++ * Erase one ore more blocks ++ */ ++#if NAND_ERASE_SUPPORT ++int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt) ++{ ++ int page, len, status, pages_per_block, ret, chipnr; ++ struct nand_chip *this = mtd->priv; ++ int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */ ++ unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */ ++ /* It is used to see if the current page is in the same */ ++ /* 256 block group and the same bank as the bbt. */ ++ ++ DEBUG (MTD_DEBUG_LEVEL3, ++ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len); ++ ++ /* Start address must align on block boundary */ ++ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n"); ++ return -EINVAL; ++ } ++ ++ /* Length must align on block boundary */ ++ if (instr->len & ((1 << this->phys_erase_shift) - 1)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n"); ++ return -EINVAL; ++ } ++ ++ /* Do not allow erase past end of device */ ++ if ((instr->len + instr->addr) > mtd->size) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n"); ++ return -EINVAL; ++ } ++ ++ instr->fail_addr = 0xffffffff; ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd, FL_ERASING); ++ ++ /* Shift to get first page */ ++ page = (int) (instr->addr >> this->page_shift); ++ chipnr = (int) (instr->addr >> this->chip_shift); ++ ++ /* Calculate pages in each block */ ++ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift); ++ ++ /* Select the NAND device */ ++ this->select_chip(mtd, chipnr); ++ ++ /* Check the WP bit */ ++ /* Check, if it is write protected */ ++ if (nand_check_wp(mtd)) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n"); ++ instr->state = MTD_ERASE_FAILED; ++ goto erase_exit; ++ } ++ ++ /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */ ++ if (this->options & BBT_AUTO_REFRESH) { ++ bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; ++ } else { ++ bbt_masked_page = 0xffffffff; /* should not match anything */ ++ } ++ ++ /* Loop through the pages */ ++ len = instr->len; ++ ++ instr->state = MTD_ERASING; ++ ++ while (len) { ++ /* Check if we have a bad block, we do not erase bad blocks ! */ ++ if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) { ++ puts ("nand_erase: attempt to erase a bad block at page "); ++ putx (page); ++ putnl (); ++ instr->state = MTD_ERASE_FAILED; ++ goto erase_exit; ++ } ++ ++ /* Invalidate the page cache, if we erase the block which contains ++ the current cached page */ ++ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block)) ++ this->pagebuf = -1; ++ ++ this->erase_cmd (mtd, page & this->pagemask); ++ ++ status = this->waitfunc (mtd, this, FL_ERASING); ++ ++ /* See if operation failed and additional status checks are available */ ++ if ((status & NAND_STATUS_FAIL) && (this->errstat)) { ++ status = this->errstat(mtd, this, FL_ERASING, status, page); ++ } ++ ++ /* See if block erase succeeded */ ++ if (status & NAND_STATUS_FAIL) { ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); ++ instr->state = MTD_ERASE_FAILED; ++ instr->fail_addr = (page << this->page_shift); ++ goto erase_exit; ++ } ++ ++ /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */ ++ if (this->options & BBT_AUTO_REFRESH) { ++ if (((page & BBT_PAGE_MASK) == bbt_masked_page) && ++ (page != this->bbt_td->pages[chipnr])) { ++ rewrite_bbt[chipnr] = (page << this->page_shift); ++ } ++ } ++ ++ /* Increment page address and decrement length */ ++ len -= (1 << this->phys_erase_shift); ++ page += pages_per_block; ++ ++ /* Check, if we cross a chip boundary */ ++ if (len && !(page & this->pagemask)) { ++ chipnr++; ++ this->select_chip(mtd, -1); ++ this->select_chip(mtd, chipnr); ++ ++ /* if BBT requires refresh and BBT-PERCHIP, ++ * set the BBT page mask to see if this BBT should be rewritten */ ++ if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) { ++ bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK; ++ } ++ ++ } ++ } ++ instr->state = MTD_ERASE_DONE; ++ ++erase_exit: ++ ++ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; ++#if 0 ++ /* Do call back function */ ++ if (!ret) ++ mtd_erase_callback(instr); ++#endif ++ ++ /* Deselect and wake up anyone waiting on the device */ ++ nand_release_device(mtd); ++ ++#if NAND_BBT_SUPPORT ++ /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */ ++ if ((this->options & BBT_AUTO_REFRESH) && (!ret)) { ++ for (chipnr = 0; chipnr < this->numchips; chipnr++) { ++ if (rewrite_bbt[chipnr]) { ++ /* update the BBT for chip */ ++ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n", ++ chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]); ++ nand_update_bbt (mtd, rewrite_bbt[chipnr]); ++ } ++ } ++ } ++#endif ++ ++ /* Return more or less happy */ ++ return ret; ++} ++#endif ++ ++/** ++ * nand_sync - [MTD Interface] sync ++ * @mtd: MTD device structure ++ * ++ * Sync is actually a wait for chip ready function ++ */ ++#if 0 /* not needed */ ++static void nand_sync (struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n"); ++ ++ /* Grab the lock and see if the device is available */ ++ nand_get_device (this, mtd, FL_SYNCING); ++ /* Release it and go back */ ++ nand_release_device (mtd); ++} ++#endif ++ ++ ++/** ++ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad ++ * @mtd: MTD device structure ++ * @ofs: offset relative to mtd start ++ */ ++static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs) ++{ ++ /* Check for invalid offset */ ++ if (ofs > mtd->size) ++ return -EINVAL; ++ ++ return nand_block_checkbad (mtd, ofs, 1, 0); ++} ++ ++/** ++ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad ++ * @mtd: MTD device structure ++ * @ofs: offset relative to mtd start ++ */ ++#if NAND_WRITE_SUPPORT ++static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_chip *this = mtd->priv; ++ int ret; ++ ++ if ((ret = nand_block_isbad(mtd, ofs))) { ++ /* If it was bad already, return success and do nothing. */ ++ if (ret > 0) ++ return 0; ++ return ret; ++ } ++ ++ return this->block_markbad(mtd, ofs); ++} ++#endif ++ ++/** ++ * nand_suspend - [MTD Interface] Suspend the NAND flash ++ * @mtd: MTD device structure ++ */ ++#if 0 /* don't need it */ ++static int nand_suspend(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ return nand_get_device (this, mtd, FL_PM_SUSPENDED); ++} ++#endif ++ ++/** ++ * nand_resume - [MTD Interface] Resume the NAND flash ++ * @mtd: MTD device structure ++ */ ++#if 0 /* don't need it */ ++static void nand_resume(struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ if (this->state == FL_PM_SUSPENDED) ++ nand_release_device(mtd); ++ else ++ puts("resume() called for the chip which is not in suspended state\n"); ++ ++} ++#endif ++ ++ ++/** ++ * nand_scan - [NAND Interface] Scan for the NAND device ++ * @mtd: MTD device structure ++ * @maxchips: Number of chips to scan for ++ * ++ * This fills out all the not initialized function pointers ++ * with the defaults. ++ * The flash ID is read and the mtd/chip structures are ++ * filled with the appropriate values. Buffers are allocated if ++ * they are not provided by the board driver ++ * ++ */ ++int nand_scan (struct mtd_info *mtd, int maxchips) ++{ ++ int i, nand_maf_id, nand_dev_id, busw, maf_id; ++ struct nand_chip *this = mtd->priv; ++ ++ /* Get buswidth to select the correct functions*/ ++ busw = this->options & NAND_BUSWIDTH_16; ++ ++ /* check for proper chip_delay setup, set 20us if not */ ++ if (!this->chip_delay) ++ this->chip_delay = 20; ++ ++ /* check, if a user supplied command function given */ ++ if (this->cmdfunc == NULL) ++ this->cmdfunc = nand_command; ++ ++ /* check, if a user supplied wait function given */ ++ if (this->waitfunc == NULL) ++ this->waitfunc = nand_wait; ++ ++ if (!this->select_chip) ++ this->select_chip = nand_select_chip; ++ if (!this->write_byte) ++ this->write_byte = busw ? nand_write_byte16 : nand_write_byte; ++ if (!this->read_byte) ++ this->read_byte = busw ? nand_read_byte16 : nand_read_byte; ++ if (!this->write_word) ++ this->write_word = nand_write_word; ++ if (!this->read_word) ++ this->read_word = nand_read_word; ++ if (!this->block_bad) ++ this->block_bad = nand_block_bad; ++#if NAND_WRITE_SUPPORT ++ if (!this->block_markbad) ++ this->block_markbad = nand_default_block_markbad; ++#endif ++ if (!this->write_buf) ++ this->write_buf = busw ? nand_write_buf16 : nand_write_buf; ++ if (!this->read_buf) ++ this->read_buf = busw ? nand_read_buf16 : nand_read_buf; ++ if (!this->verify_buf) ++ this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; ++#if NAND_BBT_SUPPORT ++ if (!this->scan_bbt) ++ this->scan_bbt = nand_default_bbt; ++#endif ++ ++ /* Select the device */ ++ this->select_chip(mtd, 0); ++ ++ /* Send the command for reading device ID */ ++ this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); ++ ++ /* Read manufacturer and device IDs */ ++ nand_maf_id = this->read_byte(mtd); ++ nand_dev_id = this->read_byte(mtd); ++ ++ /* Print and store flash device information */ ++ for (i = 0; nand_flash_ids[i].name != NULL; i++) { ++ ++ if (nand_dev_id != nand_flash_ids[i].id) ++ continue; ++ ++ if (!mtd->name) mtd->name = nand_flash_ids[i].name; ++ this->chipsize = nand_flash_ids[i].chipsize << 20; ++ ++ /* New devices have all the information in additional id bytes */ ++ if (!nand_flash_ids[i].pagesize) { ++ int extid; ++ /* The 3rd id byte contains non relevant data ATM */ ++ extid = this->read_byte(mtd); ++ /* The 4th id byte is the important one */ ++ extid = this->read_byte(mtd); ++ /* Calc pagesize */ ++ mtd->oobblock = 1024 << (extid & 0x3); ++ extid >>= 2; ++ /* Calc oobsize */ ++ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock >> 9); ++ extid >>= 2; ++ /* Calc blocksize. Blocksize is multiples of 64KiB */ ++ mtd->erasesize = (64 * 1024) << (extid & 0x03); ++ extid >>= 2; ++ /* Get buswidth information */ ++ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; ++ ++ } else { ++ /* Old devices have this data hardcoded in the ++ * device id table */ ++ mtd->erasesize = nand_flash_ids[i].erasesize; ++ mtd->oobblock = nand_flash_ids[i].pagesize; ++ mtd->oobsize = mtd->oobblock / 32; ++ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16; ++ } ++ ++ /* Try to identify manufacturer */ ++ for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) { ++ if (nand_manuf_ids[maf_id].id == nand_maf_id) ++ break; ++ } ++ ++ /* Check, if buswidth is correct. Hardware drivers should set ++ * this correct ! */ ++ if (busw != (this->options & NAND_BUSWIDTH_16)) { ++#if 0 ++ puts ("Manufacturer ID: "); ++ putx (nand_maf_id); ++ puts (", Chip ID: "); ++ putx (nand_dev_id); ++ puts (" ("); ++ puts (nand_manuf_ids[maf_id].name); ++ putc (' '); ++ puts (mtd->name); ++ puts (")\r\n"); ++#endif ++ puts ("Expected NAND bus width "); ++ putx ((this->options & NAND_BUSWIDTH_16) ? 16 : 8); ++ puts (",found "); ++ putx (busw ? 16 : 8); ++ putnl(); ++ this->select_chip(mtd, -1); ++ return 1; ++ } ++ ++ /* Calculate the address shift from the page size */ ++ this->page_shift = ffs(mtd->oobblock) - 1; ++ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1; ++ this->chip_shift = ffs(this->chipsize) - 1; ++ ++ /* Set the bad block position */ ++ this->badblockpos = mtd->oobblock > 512 ? ++ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS; ++ ++ /* Get chip options, preserve non chip based options */ ++ this->options &= ~NAND_CHIPOPTIONS_MSK; ++ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK; ++ /* Set this as a default. Board drivers can override it, if neccecary */ ++ this->options |= NAND_NO_AUTOINCR; ++ /* Check if this is a not a samsung device. Do not clear the options ++ * for chips which are not having an extended id. ++ */ ++ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize) ++ this->options &= ~NAND_SAMSUNG_LP_OPTIONS; ++ ++#if NAND_ERASE_SUPPORT ++ /* Check for AND chips with 4 page planes */ ++ if (this->options & NAND_4PAGE_ARRAY) ++ this->erase_cmd = multi_erase_cmd; ++ else ++ this->erase_cmd = single_erase_cmd; ++#endif ++ ++ /* Do not replace user supplied command function ! */ ++ if (mtd->oobblock > 512 && this->cmdfunc == nand_command) ++ this->cmdfunc = nand_command_lp; ++ ++ puts ("Manufacturer ID / Chip ID: "); ++ putx (nand_maf_id << 8 | nand_dev_id); ++ puts (" ("); ++ puts (nand_manuf_ids[maf_id].name); ++ putc (' '); ++ puts (nand_flash_ids[i].name); ++ puts (")\r\n"); ++ break; ++ } ++ ++ if (!nand_flash_ids[i].name) { ++ puts ("No NAND device found!!!\r\n"); ++ this->select_chip(mtd, -1); ++ return 1; ++ } ++ ++#if NAND_MULTICHIP_SUPPORT ++ for (i=1; i < maxchips; i++) { ++ this->select_chip(mtd, i); ++ ++ /* Send the command for reading device ID */ ++ this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1); ++ ++ /* Read manufacturer and device IDs */ ++ if (nand_maf_id != this->read_byte(mtd) || ++ nand_dev_id != this->read_byte(mtd)) ++ break; ++ } ++ if (i > 1) { ++ putx (i); ++ puts (" NAND chips detected\r\n"); ++ } ++#endif ++ ++ /* Allocate buffers, if neccecary */ ++ if (!this->oob_buf) { ++ size_t len; ++ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift); ++ this->oob_buf = malloc (len); ++ if (!this->oob_buf) { ++ puts ("nand_scan(): Cannot allocate oob_buf\r\n"); ++ return -ENOMEM; ++ } ++ this->options |= NAND_OOBBUF_ALLOC; ++ } ++ ++ if (!this->data_buf) { ++ size_t len; ++ len = mtd->oobblock + mtd->oobsize; ++ this->data_buf = malloc (len); ++ if (!this->data_buf) { ++ if (this->options & NAND_OOBBUF_ALLOC) ++ free (this->oob_buf); ++ puts ("nand_scan(): Cannot allocate data_buf\r\n"); ++ return -ENOMEM; ++ } ++ this->options |= NAND_DATABUF_ALLOC; ++ } ++ ++#if NAND_MULTICHIP_SUPP0RT ++ /* Store the number of chips and calc total size for mtd */ ++ this->numchips = i; ++ mtd->size = i * this->chipsize; ++#else ++ /* Store the number of chips and calc total size for mtd */ ++ this->numchips = 1; ++ mtd->size = this->chipsize; ++#endif ++ ++ /* Convert chipsize to number of pages per chip -1. */ ++ this->pagemask = (this->chipsize >> this->page_shift) - 1; ++ /* Preset the internal oob buffer */ ++ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift)); ++ ++ /* If no default placement scheme is given, select an ++ * appropriate one */ ++ if (!this->autooob) { ++ /* Select the appropriate default oob placement scheme for ++ * placement agnostic filesystems */ ++ switch (mtd->oobsize) { ++ case 8: ++ this->autooob = &nand_oob_8; ++ break; ++ case 16: ++ this->autooob = &nand_oob_16; ++ break; ++ case 64: ++ this->autooob = &nand_oob_64; ++ break; ++ default: ++ puts ("No oob scheme defined for oobsize "); ++ putx (mtd->oobsize); ++ putnl (); ++ BUG(); ++ } ++ } ++ ++ /* The number of bytes available for the filesystem to place fs dependend ++ * oob data */ ++ mtd->oobavail = 0; ++ for (i = 0; this->autooob->oobfree[i][1]; i++) ++ mtd->oobavail += this->autooob->oobfree[i][1]; ++ ++ /* ++ * check ECC mode, default to software ++ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize ++ * fallback to software ECC ++ */ ++ this->eccsize = 256; /* set default eccsize */ ++ this->eccbytes = 3; ++ ++ switch (this->eccmode) { ++#if NAND_HWECC_SUPPORT ++ case NAND_ECC_HW12_2048: ++ if (mtd->oobblock < 2048) { ++ puts ("2048 byte HW ECC not possible on "); ++ putx (mtd->oobblock); ++ puts (" byte page size, fallback to SW ECC\r\n"); ++ this->eccmode = NAND_ECC_SOFT; ++ this->calculate_ecc = nand_calculate_ecc; ++ this->correct_data = nand_correct_data; ++ } else ++ this->eccsize = 2048; ++ break; ++ ++ case NAND_ECC_HW3_512: ++ case NAND_ECC_HW6_512: ++ case NAND_ECC_HW8_512: ++ if (mtd->oobblock == 256) { ++ puts ("512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC\r\n"); ++ this->eccmode = NAND_ECC_SOFT; ++ this->calculate_ecc = nand_calculate_ecc; ++ this->correct_data = nand_correct_data; ++ } else ++ this->eccsize = 512; /* set eccsize to 512 */ ++ break; ++ ++ case NAND_ECC_HW3_256: ++ break; ++#endif ++ ++ case NAND_ECC_NONE: ++ puts ("NAND_ECC_NONE selected by board driver. This is not recommended !!\r\n"); ++ this->eccmode = NAND_ECC_NONE; ++ break; ++ ++ case NAND_ECC_SOFT: ++ this->calculate_ecc = nand_calculate_ecc; ++ this->correct_data = nand_correct_data; ++ break; ++ ++ default: ++ puts ("Invalid NAND_ECC_MODE "); ++ putx (this->eccmode); ++ putnl (); ++ BUG(); ++ } ++ ++ /* Check hardware ecc function availability and adjust number of ecc bytes per ++ * calculation step ++ */ ++ switch (this->eccmode) { ++ case NAND_ECC_HW12_2048: ++ this->eccbytes += 4; ++ case NAND_ECC_HW8_512: ++ this->eccbytes += 2; ++ case NAND_ECC_HW6_512: ++ this->eccbytes += 3; ++ case NAND_ECC_HW3_512: ++ case NAND_ECC_HW3_256: ++ if (this->calculate_ecc && this->correct_data && this->enable_hwecc) ++ break; ++ puts ("No ECC functions supplied, Hardware ECC not possible\r\n"); ++ BUG(); ++ } ++ ++ mtd->eccsize = this->eccsize; ++ ++ /* Set the number of read / write steps for one page to ensure ECC generation */ ++ switch (this->eccmode) { ++ case NAND_ECC_HW12_2048: ++ this->eccsteps = mtd->oobblock / 2048; ++ break; ++ case NAND_ECC_HW3_512: ++ case NAND_ECC_HW6_512: ++ case NAND_ECC_HW8_512: ++ this->eccsteps = mtd->oobblock / 512; ++ break; ++ case NAND_ECC_HW3_256: ++ case NAND_ECC_SOFT: ++ this->eccsteps = mtd->oobblock / 256; ++ break; ++ ++ case NAND_ECC_NONE: ++ this->eccsteps = 1; ++ break; ++ } ++ ++ /* Initialize state, waitqueue and spinlock */ ++ this->state = FL_READY; ++#if 0 ++ init_waitqueue_head (&this->wq); ++ spin_lock_init (&this->chip_lock); ++#endif ++ ++ /* De-select the device */ ++ this->select_chip(mtd, -1); ++ ++ /* Invalidate the pagebuffer reference */ ++ this->pagebuf = -1; ++ ++ /* Fill in remaining MTD driver data */ ++ mtd->type = MTD_NANDFLASH; ++ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC; ++ mtd->ecctype = MTD_ECC_SW; ++#if NAND_ERASE_SUPPORT ++ mtd->erase = nand_erase; ++#endif ++#if 0 /* not needed */ ++ mtd->point = NULL; ++ mtd->unpoint = NULL; ++#endif ++ mtd->read = nand_read; ++#if NAND_WRITE_SUPPORT ++ mtd->write = nand_write; ++#endif ++ mtd->read_ecc = nand_read_ecc; ++#if NAND_WRITE_SUPPORT ++ mtd->write_ecc = nand_write_ecc; ++#endif ++ mtd->read_oob = nand_read_oob; ++#if NAND_WRITE_SUPPORT ++ mtd->write_oob = nand_write_oob; ++#endif ++#if NAND_KVEC_SUPPORT ++ mtd->readv = NULL; ++#endif ++#if NAND_WRITE_SUPPORT && NAND_KVEC_SUPPORT ++ mtd->writev = nand_writev; ++ mtd->writev_ecc = nand_writev_ecc; ++#endif ++#if 0 /* not needed */ ++ mtd->sync = nand_sync; ++ mtd->lock = NULL; ++ mtd->unlock = NULL; ++ mtd->suspend = nand_suspend; ++ mtd->resume = nand_resume; ++#endif ++ mtd->block_isbad = nand_block_isbad; ++#if NAND_WRITE_SUPPORT ++ mtd->block_markbad = nand_block_markbad; ++#endif ++ ++ /* and make the autooob the default one */ ++ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo)); ++ ++#ifdef THIS_MODULE /* normally isn't for us */ ++ mtd->owner = THIS_MODULE; ++#endif ++ ++ /* Check, if we should skip the bad block table scan */ ++ if (this->options & NAND_SKIP_BBTSCAN) ++ return 0; ++ ++#if NAND_BBT_SUPPORT ++ /* Build bad block table */ ++ return this->scan_bbt (mtd); ++#else ++ return -1; ++#endif ++} ++ ++/** ++ * nand_release - [NAND Interface] Free resources held by the NAND device ++ * @mtd: MTD device structure ++*/ ++#if 0 /* don't need it */ ++void nand_release (struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++#if 0 ++#ifdef CONFIG_MTD_PARTITIONS ++ /* Deregister partitions */ ++ del_mtd_partitions (mtd); ++#endif ++ /* Deregister the device */ ++ del_mtd_device (mtd); ++#endif ++ ++ /* Free bad block table memory */ ++ free (this->bbt); ++ /* Buffer allocated by nand_scan ? */ ++ if (this->options & NAND_OOBBUF_ALLOC) ++ free (this->oob_buf); ++ /* Buffer allocated by nand_scan ? */ ++ if (this->options & NAND_DATABUF_ALLOC) ++ free (this->data_buf); ++} ++#endif +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_bbt.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_bbt.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_bbt.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_bbt.c 2006-11-10 09:55:58.000000000 +0100 +@@ -0,0 +1,1151 @@ ++/* ++ * drivers/mtd/nand_bbt.c ++ * ++ * Overview: ++ * Bad block table support for the NAND driver ++ * ++ * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) ++ * ++ * $Id: nand_bbt.c,v 1.5 2006/11/10 08:55:58 ricardw Exp $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * Description: ++ * ++ * When nand_scan_bbt is called, then it tries to find the bad block table ++ * depending on the options in the bbt descriptor(s). If a bbt is found ++ * then the contents are read and the memory based bbt is created. If a ++ * mirrored bbt is selected then the mirror is searched too and the ++ * versions are compared. If the mirror has a greater version number ++ * than the mirror bbt is used to build the memory based bbt. ++ * If the tables are not versioned, then we "or" the bad block information. ++ * If one of the bbt's is out of date or does not exist it is (re)created. ++ * If no bbt exists at all then the device is scanned for factory marked ++ * good / bad blocks and the bad block tables are created. ++ * ++ * For manufacturer created bbts like the one found on M-SYS DOC devices ++ * the bbt is searched and read but never created ++ * ++ * The autogenerated bad block table is located in the last good blocks ++ * of the device. The table is mirrored, so it can be updated eventually. ++ * The table is marked in the oob area with an ident pattern and a version ++ * number which indicates which of both tables is more up to date. ++ * ++ * The table uses 2 bits per block ++ * 11b: block is good ++ * 00b: block is factory marked bad ++ * 01b, 10b: block is marked bad due to wear ++ * ++ * The memory bad block table uses the following scheme: ++ * 00b: block is good ++ * 01b: block is marked bad due to wear ++ * 10b: block is reserved (to protect the bbt area) ++ * 11b: block is factory marked bad ++ * ++ * Multichip devices like DOC store the bad block info per floor. ++ * ++ * Following assumptions are made: ++ * - bbts start at a page boundary, if autolocated on a block boundary ++ * - the space neccecary for a bbt in FLASH does not exceed a block boundary ++ * ++ */ ++ ++#if 0 ++#include <linux/slab.h> ++#endif ++ ++#include <linux/types.h> ++#include "mtd.h" ++#include "nand.h" ++#include "nand_ecc.h" ++ ++#if 0 ++#include <linux/mtd/compatmac.h> ++#include <linux/bitops.h> ++#endif ++ ++#include <linux/delay.h> ++ ++#include "lib.h" ++ ++ ++/** ++ * check_pattern - [GENERIC] check if a pattern is in the buffer ++ * @buf: the buffer to search ++ * @len: the length of buffer to search ++ * @paglen: the pagelength ++ * @td: search pattern descriptor ++ * ++ * Check for a pattern at the given place. Used to search bad block ++ * tables and good / bad block identifiers. ++ * If the SCAN_EMPTY option is set then check, if all bytes except the ++ * pattern area contain 0xff ++ * ++*/ ++static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) ++{ ++ int i, end = 0; ++ uint8_t *p = buf; ++ ++ end = paglen + td->offs; ++ if (td->options & NAND_BBT_SCANEMPTY) { ++ for (i = 0; i < end; i++) { ++ if (p[i] != 0xff) ++ return -1; ++ } ++ } ++ p += end; ++ ++ /* Compare the pattern */ ++ for (i = 0; i < td->len; i++) { ++ if (p[i] != td->pattern[i]) ++ return -1; ++ } ++ ++ if (td->options & NAND_BBT_SCANEMPTY) { ++ p += td->len; ++ end += td->len; ++ for (i = end; i < len; i++) { ++ if (*p++ != 0xff) ++ return -1; ++ } ++ } ++ return 0; ++} ++ ++/** ++ * check_short_pattern - [GENERIC] check if a pattern is in the buffer ++ * @buf: the buffer to search ++ * @td: search pattern descriptor ++ * ++ * Check for a pattern at the given place. Used to search bad block ++ * tables and good / bad block identifiers. Same as check_pattern, but ++ * no optional empty check ++ * ++*/ ++static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td) ++{ ++ int i; ++ uint8_t *p = buf; ++ ++ /* Compare the pattern */ ++ for (i = 0; i < td->len; i++) { ++ if (p[td->offs + i] != td->pattern[i]) ++ return -1; ++ } ++ return 0; ++} ++ ++/** ++ * read_bbt - [GENERIC] Read the bad block table starting from page ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @page: the starting page ++ * @num: the number of bbt descriptors to read ++ * @bits: number of bits per block ++ * @offs: offset in the memory table ++ * @reserved_block_code: Pattern to identify reserved blocks ++ * ++ * Read the bad block table starting from page. ++ * ++ */ ++static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num, ++ int bits, int offs, int reserved_block_code) ++{ ++ int res, i, j, act = 0; ++ struct nand_chip *this = mtd->priv; ++ size_t retlen, len, totlen; ++ loff_t from; ++ uint8_t msk = (uint8_t) ((1 << bits) - 1); ++ ++ totlen = (num * bits) >> 3; ++ from = ((loff_t)page) << this->page_shift; ++ ++ while (totlen) { ++ len = min (totlen, (size_t) (1 << this->bbt_erase_shift)); ++ res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob); ++ if (res < 0) { ++ if (retlen != len) { ++ puts ("nand_bbt: Error reading bad block table\n"); ++ return res; ++ } ++ puts ("nand_bbt: ECC error while reading bad block table\n"); ++ } ++ ++ /* Analyse data */ ++ for (i = 0; i < len; i++) { ++ uint8_t dat = buf[i]; ++ for (j = 0; j < 8; j += bits, act += 2) { ++ uint8_t tmp = (dat >> j) & msk; ++ if (tmp == msk) ++ continue; ++ if (reserved_block_code && ++ (tmp == reserved_block_code)) { ++ puts ("nand_read_bbt: Reserved block at"); ++ putx (((offs << 2) + (act >> 1)) << this->bbt_erase_shift); ++ putnl (); ++ this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); ++ continue; ++ } ++ /* Leave it for now, if its matured we can move this ++ * message to MTD_DEBUG_LEVEL0 */ ++ puts ("nand_read_bbt: Bad block at "); ++ putx (((offs << 2) + (act >> 1)) << this->bbt_erase_shift); ++ putnl (); ++ /* Factory marked bad or worn out ? */ ++ if (tmp == 0) ++ this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); ++ else ++ this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06); ++ } ++ } ++ totlen -= len; ++ from += len; ++ } ++ return 0; ++} ++ ++/** ++ * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @td: descriptor for the bad block table ++ * @chip: read the table for a specific chip, -1 read all chips. ++ * Applies only if NAND_BBT_PERCHIP option is set ++ * ++ * Read the bad block table for all chips starting at a given page ++ * We assume that the bbt bits are in consecutive order. ++*/ ++static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip) ++{ ++ struct nand_chip *this = mtd->priv; ++ int res = 0, i; ++ int bits; ++ ++ bits = td->options & NAND_BBT_NRBITS_MSK; ++ if (td->options & NAND_BBT_PERCHIP) { ++ int offs = 0; ++ for (i = 0; i < this->numchips; i++) { ++ if (chip == -1 || chip == i) ++ res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code); ++ if (res) ++ return res; ++ offs += this->chipsize >> (this->bbt_erase_shift + 2); ++ } ++ } else { ++ res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code); ++ if (res) ++ return res; ++ } ++ return 0; ++} ++ ++/** ++ * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @td: descriptor for the bad block table ++ * @md: descriptor for the bad block table mirror ++ * ++ * Read the bad block table(s) for all chips starting at a given page ++ * We assume that the bbt bits are in consecutive order. ++ * ++*/ ++static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, ++ struct nand_bbt_descr *md) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ /* Read the primary version, if available */ ++ if (td->options & NAND_BBT_VERSION) { ++ nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); ++ td->version[0] = buf[mtd->oobblock + td->veroffs]; ++ puts ("Bad block table at page "); ++ putx (td->pages[0]); ++ puts (", version "); ++ putx (td->version[0]); ++ putnl (); ++ } ++ ++ /* Read the mirror version, if available */ ++ if (md && (md->options & NAND_BBT_VERSION)) { ++ nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize); ++ md->version[0] = buf[mtd->oobblock + md->veroffs]; ++ puts ("Bad block table at page "); ++ putx (md->pages[0]); ++ puts (", version "); ++ putx (md->version[0]); ++ putnl (); ++ } ++ ++ return 1; ++} ++ ++/** ++ * create_bbt - [GENERIC] Create a bad block table by scanning the device ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @bd: descriptor for the good/bad block search pattern ++ * @chip: create the table for a specific chip, -1 read all chips. ++ * Applies only if NAND_BBT_PERCHIP option is set ++ * ++ * Create a bad block table by scanning the device ++ * for the given good/bad block identify pattern ++ */ ++static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) ++{ ++ struct nand_chip *this = mtd->priv; ++ int i, j, numblocks, len, scanlen; ++ int startblock; ++ loff_t from; ++ size_t readlen, ooblen; ++ ++ puts ("Scanning device for bad blocks\n"); ++ ++ if (bd->options & NAND_BBT_SCANALLPAGES) ++ len = 1 << (this->bbt_erase_shift - this->page_shift); ++ else { ++ if (bd->options & NAND_BBT_SCAN2NDPAGE) ++ len = 2; ++ else ++ len = 1; ++ } ++ ++ if (!(bd->options & NAND_BBT_SCANEMPTY)) { ++ /* We need only read few bytes from the OOB area */ ++ scanlen = ooblen = 0; ++ readlen = bd->len; ++ } else { ++ /* Full page content should be read */ ++ scanlen = mtd->oobblock + mtd->oobsize; ++ readlen = len * mtd->oobblock; ++ ooblen = len * mtd->oobsize; ++ } ++ ++ if (chip == -1) { ++ /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it ++ * makes shifting and masking less painful */ ++ numblocks = mtd->size >> (this->bbt_erase_shift - 1); ++ startblock = 0; ++ from = 0; ++ } else { ++ if (chip >= this->numchips) { ++ puts ("create_bbt(): chipnr ("); ++ putx (chip + 1); ++ puts (" > available chips "); ++ putx (this->numchips); ++ putnl (); ++ return -EINVAL; ++ } ++ numblocks = this->chipsize >> (this->bbt_erase_shift - 1); ++ startblock = chip * numblocks; ++ numblocks += startblock; ++ from = startblock << (this->bbt_erase_shift - 1); ++ } ++ ++ for (i = startblock; i < numblocks;) { ++ int ret; ++ ++ if (bd->options & NAND_BBT_SCANEMPTY) ++ if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen))) ++ return ret; ++ ++ for (j = 0; j < len; j++) { ++ if (!(bd->options & NAND_BBT_SCANEMPTY)) { ++ size_t retlen; ++ ++ /* Read the full oob until read_oob is fixed to ++ * handle single byte reads for 16 bit buswidth */ ++ ret = mtd->read_oob(mtd, from + j * mtd->oobblock, ++ mtd->oobsize, &retlen, buf); ++ if (ret) ++ return ret; ++ ++ if (check_short_pattern (buf, bd)) { ++ this->bbt[i >> 3] |= 0x03 << (i & 0x6); ++ puts ("Bad eraseblock "); ++ putx (i >> 1); ++ puts (" at "); ++ putx ((unsigned int) from); ++ putnl (); ++ break; ++ } ++ } else { ++ if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) { ++ this->bbt[i >> 3] |= 0x03 << (i & 0x6); ++ puts ("Bad eraseblock "); ++ putx (i >> 1); ++ puts (" at "); ++ putx ((unsigned int) from); ++ putnl (); ++ break; ++ } ++ } ++ } ++ i += 2; ++ from += (1 << this->bbt_erase_shift); ++ } ++ return 0; ++} ++ ++/** ++ * search_bbt - [GENERIC] scan the device for a specific bad block table ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @td: descriptor for the bad block table ++ * ++ * Read the bad block table by searching for a given ident pattern. ++ * Search is preformed either from the beginning up or from the end of ++ * the device downwards. The search starts always at the start of a ++ * block. ++ * If the option NAND_BBT_PERCHIP is given, each chip is searched ++ * for a bbt, which contains the bad block information of this chip. ++ * This is neccecary to provide support for certain DOC devices. ++ * ++ * The bbt ident pattern resides in the oob area of the first page ++ * in a block. ++ */ ++static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td) ++{ ++ struct nand_chip *this = mtd->priv; ++ int i, chips; ++ int bits, startblock, block, dir; ++ int scanlen = mtd->oobblock + mtd->oobsize; ++ int bbtblocks; ++ ++ /* Search direction top -> down ? */ ++ if (td->options & NAND_BBT_LASTBLOCK) { ++ startblock = (mtd->size >> this->bbt_erase_shift) -1; ++ dir = -1; ++ } else { ++ startblock = 0; ++ dir = 1; ++ } ++ ++ /* Do we have a bbt per chip ? */ ++ if (td->options & NAND_BBT_PERCHIP) { ++ chips = this->numchips; ++ bbtblocks = this->chipsize >> this->bbt_erase_shift; ++ startblock &= bbtblocks - 1; ++ } else { ++ chips = 1; ++ bbtblocks = mtd->size >> this->bbt_erase_shift; ++ } ++ ++ /* Number of bits for each erase block in the bbt */ ++ bits = td->options & NAND_BBT_NRBITS_MSK; ++ ++ for (i = 0; i < chips; i++) { ++ /* Reset version information */ ++ td->version[i] = 0; ++ td->pages[i] = -1; ++ /* Scan the maximum number of blocks */ ++ for (block = 0; block < td->maxblocks; block++) { ++ int actblock = startblock + dir * block; ++ /* Read first page */ ++ nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize); ++ if (!check_pattern(buf, scanlen, mtd->oobblock, td)) { ++ td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift); ++ if (td->options & NAND_BBT_VERSION) { ++ td->version[i] = buf[mtd->oobblock + td->veroffs]; ++ } ++ break; ++ } ++ } ++ startblock += this->chipsize >> this->bbt_erase_shift; ++ } ++ /* Check, if we found a bbt for each requested chip */ ++ for (i = 0; i < chips; i++) { ++ if (td->pages[i] == -1) { ++ puts ("Bad block table not found for chip "); ++ putx (i); ++ putnl (); ++ } else { ++ puts ("Bad block table found at page "); ++ putx (td->pages[i]); ++ puts (" version "); ++ putx (td->version[i]); ++ putnl (); ++ } ++ } ++ return 0; ++} ++ ++/** ++ * search_read_bbts - [GENERIC] scan the device for bad block table(s) ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @td: descriptor for the bad block table ++ * @md: descriptor for the bad block table mirror ++ * ++ * Search and read the bad block table(s) ++*/ ++static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf, ++ struct nand_bbt_descr *td, struct nand_bbt_descr *md) ++{ ++ /* Search the primary table */ ++ search_bbt (mtd, buf, td); ++ ++ /* Search the mirror table */ ++ if (md) ++ search_bbt (mtd, buf, md); ++ ++ /* Force result check */ ++ return 1; ++} ++ ++ ++/** ++ * write_bbt - [GENERIC] (Re)write the bad block table ++ * ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @td: descriptor for the bad block table ++ * @md: descriptor for the bad block table mirror ++ * @chipsel: selector for a specific chip, -1 for all ++ * ++ * (Re)write the bad block table ++ * ++*/ ++static int write_bbt (struct mtd_info *mtd, uint8_t *buf, ++ struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel) ++{ ++ struct nand_chip *this = mtd->priv; ++ struct nand_oobinfo oobinfo; ++ struct erase_info einfo; ++ int i, j, res, chip = 0; ++ int bits, startblock, dir, page, offs, numblocks, sft, sftmsk; ++ int nrchips, bbtoffs, pageoffs; ++ uint8_t msk[4]; ++ uint8_t rcode = td->reserved_block_code; ++ size_t retlen, len = 0; ++ loff_t to; ++ ++ if (!rcode) ++ rcode = 0xff; ++ /* Write bad block table per chip rather than per device ? */ ++ if (td->options & NAND_BBT_PERCHIP) { ++ numblocks = (int) (this->chipsize >> this->bbt_erase_shift); ++ /* Full device write or specific chip ? */ ++ if (chipsel == -1) { ++ nrchips = this->numchips; ++ } else { ++ nrchips = chipsel + 1; ++ chip = chipsel; ++ } ++ } else { ++ numblocks = (int) (mtd->size >> this->bbt_erase_shift); ++ nrchips = 1; ++ } ++ ++ /* Loop through the chips */ ++ for (; chip < nrchips; chip++) { ++ ++ /* There was already a version of the table, reuse the page ++ * This applies for absolute placement too, as we have the ++ * page nr. in td->pages. ++ */ ++ if (td->pages[chip] != -1) { ++ page = td->pages[chip]; ++ goto write; ++ } ++ ++ /* Automatic placement of the bad block table */ ++ /* Search direction top -> down ? */ ++ if (td->options & NAND_BBT_LASTBLOCK) { ++ startblock = numblocks * (chip + 1) - 1; ++ dir = -1; ++ } else { ++ startblock = chip * numblocks; ++ dir = 1; ++ } ++ ++ for (i = 0; i < td->maxblocks; i++) { ++ int block = startblock + dir * i; ++ /* Check, if the block is bad */ ++ switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) { ++ case 0x01: ++ case 0x03: ++ continue; ++ } ++ page = block << (this->bbt_erase_shift - this->page_shift); ++ /* Check, if the block is used by the mirror table */ ++ if (!md || md->pages[chip] != page) ++ goto write; ++ } ++ puts ("No space left to write bad block table\r\n"); ++ return -ENOSPC; ++write: ++ ++ /* Set up shift count and masks for the flash table */ ++ bits = td->options & NAND_BBT_NRBITS_MSK; ++ switch (bits) { ++ case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break; ++ case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break; ++ case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break; ++ case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break; ++ default: return -EINVAL; ++ } ++ ++ bbtoffs = chip * (numblocks >> 2); ++ ++ to = ((loff_t) page) << this->page_shift; ++ ++ memcpy (&oobinfo, this->autooob, sizeof(oobinfo)); ++ oobinfo.useecc = MTD_NANDECC_PLACEONLY; ++ ++ /* Must we save the block contents ? */ ++ if (td->options & NAND_BBT_SAVECONTENT) { ++ /* Make it block aligned */ ++ to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1)); ++ len = 1 << this->bbt_erase_shift; ++ res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); ++ if (res < 0) { ++ if (retlen != len) { ++ puts ("nand_bbt: Error reading block for writing the bad block table\r\n"); ++ return res; ++ } ++ puts ("nand_bbt: ECC error while reading block for writing bad block table\r\n"); ++ } ++ /* Calc the byte offset in the buffer */ ++ pageoffs = page - (int)(to >> this->page_shift); ++ offs = pageoffs << this->page_shift; ++ /* Preset the bbt area with 0xff */ ++ memset (&buf[offs], 0xff, (size_t)(numblocks >> sft)); ++ /* Preset the bbt's oob area with 0xff */ ++ memset (&buf[len + pageoffs * mtd->oobsize], 0xff, ++ ((len >> this->page_shift) - pageoffs) * mtd->oobsize); ++ if (td->options & NAND_BBT_VERSION) { ++ buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip]; ++ } ++ } else { ++ /* Calc length */ ++ len = (size_t) (numblocks >> sft); ++ /* Make it page aligned ! */ ++ len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1); ++ /* Preset the buffer with 0xff */ ++ memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize); ++ offs = 0; ++ /* Pattern is located in oob area of first page */ ++ memcpy (&buf[len + td->offs], td->pattern, td->len); ++ if (td->options & NAND_BBT_VERSION) { ++ buf[len + td->veroffs] = td->version[chip]; ++ } ++ } ++ ++ /* walk through the memory table */ ++ for (i = 0; i < numblocks; ) { ++ uint8_t dat; ++ dat = this->bbt[bbtoffs + (i >> 2)]; ++ for (j = 0; j < 4; j++ , i++) { ++ int sftcnt = (i << (3 - sft)) & sftmsk; ++ /* Do not store the reserved bbt blocks ! */ ++ buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt); ++ dat >>= 2; ++ } ++ } ++ ++ memset (&einfo, 0, sizeof (einfo)); ++ einfo.mtd = mtd; ++ einfo.addr = (unsigned long) to; ++ einfo.len = 1 << this->bbt_erase_shift; ++ res = nand_erase_nand (mtd, &einfo, 1); ++ if (res < 0) { ++ puts ("nand_bbt: Error during block erase: "); ++ putx (res); ++ putnl(); ++ return res; ++ } ++ ++ res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo); ++ if (res < 0) { ++ puts ("nand_bbt: Error while writing bad block table "); ++ putx (res); ++ putnl (); ++ return res; ++ } ++ puts ("Bad block table written to "); ++ putx ((unsigned int) to); ++ puts (", version "); ++ putx (td->version[chip]); ++ putnl (); ++ ++ /* Mark it as used */ ++ td->pages[chip] = page; ++ } ++ return 0; ++} ++ ++/** ++ * nand_memory_bbt - [GENERIC] create a memory based bad block table ++ * @mtd: MTD device structure ++ * @bd: descriptor for the good/bad block search pattern ++ * ++ * The function creates a memory based bbt by scanning the device ++ * for manufacturer / software marked good / bad blocks ++*/ ++static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ bd->options &= ~NAND_BBT_SCANEMPTY; ++ return create_bbt (mtd, this->data_buf, bd, -1); ++} ++ ++/** ++ * check_create - [GENERIC] create and write bbt(s) if neccecary ++ * @mtd: MTD device structure ++ * @buf: temporary buffer ++ * @bd: descriptor for the good/bad block search pattern ++ * ++ * The function checks the results of the previous call to read_bbt ++ * and creates / updates the bbt(s) if neccecary ++ * Creation is neccecary if no bbt was found for the chip/device ++ * Update is neccecary if one of the tables is missing or the ++ * version nr. of one table is less than the other ++*/ ++static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd) ++{ ++ int i, chips, writeops, chipsel, res; ++ struct nand_chip *this = mtd->priv; ++ struct nand_bbt_descr *td = this->bbt_td; ++ struct nand_bbt_descr *md = this->bbt_md; ++ struct nand_bbt_descr *rd, *rd2; ++ ++ /* Do we have a bbt per chip ? */ ++ if (td->options & NAND_BBT_PERCHIP) ++ chips = this->numchips; ++ else ++ chips = 1; ++ ++ for (i = 0; i < chips; i++) { ++ writeops = 0; ++ rd = NULL; ++ rd2 = NULL; ++ /* Per chip or per device ? */ ++ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1; ++ /* Mirrored table avilable ? */ ++ if (md) { ++ if (td->pages[i] == -1 && md->pages[i] == -1) { ++ writeops = 0x03; ++ goto create; ++ } ++ ++ if (td->pages[i] == -1) { ++ rd = md; ++ td->version[i] = md->version[i]; ++ writeops = 1; ++ goto writecheck; ++ } ++ ++ if (md->pages[i] == -1) { ++ rd = td; ++ md->version[i] = td->version[i]; ++ writeops = 2; ++ goto writecheck; ++ } ++ ++ if (td->version[i] == md->version[i]) { ++ rd = td; ++ if (!(td->options & NAND_BBT_VERSION)) ++ rd2 = md; ++ goto writecheck; ++ } ++ ++ if (((int8_t) (td->version[i] - md->version[i])) > 0) { ++ rd = td; ++ md->version[i] = td->version[i]; ++ writeops = 2; ++ } else { ++ rd = md; ++ td->version[i] = md->version[i]; ++ writeops = 1; ++ } ++ ++ goto writecheck; ++ ++ } else { ++ if (td->pages[i] == -1) { ++ writeops = 0x01; ++ goto create; ++ } ++ rd = td; ++ goto writecheck; ++ } ++create: ++ /* Create the bad block table by scanning the device ? */ ++ if (!(td->options & NAND_BBT_CREATE)) ++ continue; ++ ++ /* Create the table in memory by scanning the chip(s) */ ++ create_bbt (mtd, buf, bd, chipsel); ++ ++ td->version[i] = 1; ++ if (md) ++ md->version[i] = 1; ++writecheck: ++ /* read back first ? */ ++ if (rd) ++ read_abs_bbt (mtd, buf, rd, chipsel); ++ /* If they weren't versioned, read both. */ ++ if (rd2) ++ read_abs_bbt (mtd, buf, rd2, chipsel); ++ ++ /* Write the bad block table to the device ? */ ++ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { ++ res = write_bbt (mtd, buf, td, md, chipsel); ++ if (res < 0) ++ return res; ++ } ++ ++ /* Write the mirror bad block table to the device ? */ ++ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { ++ res = write_bbt (mtd, buf, md, td, chipsel); ++ if (res < 0) ++ return res; ++ } ++ } ++ return 0; ++} ++ ++/** ++ * mark_bbt_regions - [GENERIC] mark the bad block table regions ++ * @mtd: MTD device structure ++ * @td: bad block table descriptor ++ * ++ * The bad block table regions are marked as "bad" to prevent ++ * accidental erasures / writes. The regions are identified by ++ * the mark 0x02. ++*/ ++static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td) ++{ ++ struct nand_chip *this = mtd->priv; ++ int i, j, chips, block, nrblocks, update; ++ uint8_t oldval, newval; ++ ++ /* Do we have a bbt per chip ? */ ++ if (td->options & NAND_BBT_PERCHIP) { ++ chips = this->numchips; ++ nrblocks = (int)(this->chipsize >> this->bbt_erase_shift); ++ } else { ++ chips = 1; ++ nrblocks = (int)(mtd->size >> this->bbt_erase_shift); ++ } ++ ++ for (i = 0; i < chips; i++) { ++ if ((td->options & NAND_BBT_ABSPAGE) || ++ !(td->options & NAND_BBT_WRITE)) { ++ if (td->pages[i] == -1) continue; ++ block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift); ++ block <<= 1; ++ oldval = this->bbt[(block >> 3)]; ++ newval = oldval | (0x2 << (block & 0x06)); ++ this->bbt[(block >> 3)] = newval; ++ if ((oldval != newval) && td->reserved_block_code) ++ nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1)); ++ continue; ++ } ++ update = 0; ++ if (td->options & NAND_BBT_LASTBLOCK) ++ block = ((i + 1) * nrblocks) - td->maxblocks; ++ else ++ block = i * nrblocks; ++ block <<= 1; ++ for (j = 0; j < td->maxblocks; j++) { ++ oldval = this->bbt[(block >> 3)]; ++ newval = oldval | (0x2 << (block & 0x06)); ++ this->bbt[(block >> 3)] = newval; ++ if (oldval != newval) update = 1; ++ block += 2; ++ } ++ /* If we want reserved blocks to be recorded to flash, and some ++ new ones have been marked, then we need to update the stored ++ bbts. This should only happen once. */ ++ if (update && td->reserved_block_code) ++ nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1)); ++ } ++} ++ ++/** ++ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s) ++ * @mtd: MTD device structure ++ * @bd: descriptor for the good/bad block search pattern ++ * ++ * The function checks, if a bad block table(s) is/are already ++ * available. If not it scans the device for manufacturer ++ * marked good / bad blocks and writes the bad block table(s) to ++ * the selected place. ++ * ++ * The bad block table memory is allocated here. It must be freed ++ * by calling the nand_free_bbt function. ++ * ++*/ ++int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd) ++{ ++ struct nand_chip *this = mtd->priv; ++ int len, res = 0; ++ uint8_t *buf; ++ struct nand_bbt_descr *td = this->bbt_td; ++ struct nand_bbt_descr *md = this->bbt_md; ++ ++ len = mtd->size >> (this->bbt_erase_shift + 2); ++ /* Allocate memory (2bit per block) */ ++ this->bbt = malloc (len); ++ if (!this->bbt) { ++ puts ("nand_scan_bbt: Out of memory\r\n"); ++ return -ENOMEM; ++ } ++ /* Clear the memory bad block table */ ++ memset (this->bbt, 0x00, len); ++ ++ /* If no primary table decriptor is given, scan the device ++ * to build a memory based bad block table ++ */ ++ if (!td) { ++ if ((res = nand_memory_bbt(mtd, bd))) { ++ puts ("nand_bbt: Can't scan flash and build the RAM-based BBT\r\n"); ++ free (this->bbt); ++ this->bbt = NULL; ++ } ++ return res; ++ } ++ ++ /* Allocate a temporary buffer for one eraseblock incl. oob */ ++ len = (1 << this->bbt_erase_shift); ++ len += (len >> this->page_shift) * mtd->oobsize; ++ buf = malloc (len); ++ if (!buf) { ++ puts ("nand_bbt: Out of memory\r\n"); ++ free (this->bbt); ++ this->bbt = NULL; ++ return -ENOMEM; ++ } ++ ++ /* Is the bbt at a given page ? */ ++ if (td->options & NAND_BBT_ABSPAGE) { ++ res = read_abs_bbts (mtd, buf, td, md); ++ } else { ++ /* Search the bad block table using a pattern in oob */ ++ res = search_read_bbts (mtd, buf, td, md); ++ } ++ ++ if (res) ++ res = check_create (mtd, buf, bd); ++ ++ /* Prevent the bbt regions from erasing / writing */ ++ mark_bbt_region (mtd, td); ++ if (md) ++ mark_bbt_region (mtd, md); ++ ++ free (buf); ++ return res; ++} ++ ++ ++/** ++ * nand_update_bbt - [NAND Interface] update bad block table(s) ++ * @mtd: MTD device structure ++ * @offs: the offset of the newly marked block ++ * ++ * The function updates the bad block table(s) ++*/ ++int nand_update_bbt (struct mtd_info *mtd, loff_t offs) ++{ ++ struct nand_chip *this = mtd->priv; ++ int len, res = 0, writeops = 0; ++ int chip, chipsel; ++ uint8_t *buf; ++ struct nand_bbt_descr *td = this->bbt_td; ++ struct nand_bbt_descr *md = this->bbt_md; ++ ++ if (!this->bbt || !td) ++ return -EINVAL; ++ ++ len = mtd->size >> (this->bbt_erase_shift + 2); ++ /* Allocate a temporary buffer for one eraseblock incl. oob */ ++ len = (1 << this->bbt_erase_shift); ++ len += (len >> this->page_shift) * mtd->oobsize; ++ buf = malloc (len); ++ if (!buf) { ++ puts ("nand_update_bbt: Out of memory\r\n"); ++ return -ENOMEM; ++ } ++ ++ writeops = md != NULL ? 0x03 : 0x01; ++ ++ /* Do we have a bbt per chip ? */ ++ if (td->options & NAND_BBT_PERCHIP) { ++ chip = (int) (offs >> this->chip_shift); ++ chipsel = chip; ++ } else { ++ chip = 0; ++ chipsel = -1; ++ } ++ ++ td->version[chip]++; ++ if (md) ++ md->version[chip]++; ++ ++ /* Write the bad block table to the device ? */ ++ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) { ++ res = write_bbt (mtd, buf, td, md, chipsel); ++ if (res < 0) ++ goto out; ++ } ++ /* Write the mirror bad block table to the device ? */ ++ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) { ++ res = write_bbt (mtd, buf, md, td, chipsel); ++ } ++ ++out: ++ free (buf); ++ return res; ++} ++ ++/* Define some generic bad / good block scan pattern which are used ++ * while scanning a device for factory marked good / bad blocks. */ ++static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; ++ ++static struct nand_bbt_descr smallpage_memorybased = { ++ .options = NAND_BBT_SCAN2NDPAGE, ++ .offs = 5, ++ .len = 1, ++ .pattern = scan_ff_pattern ++}; ++ ++static struct nand_bbt_descr largepage_memorybased = { ++ .options = 0, ++ .offs = 0, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++ ++static struct nand_bbt_descr smallpage_flashbased = { ++ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, ++ .offs = 5, ++ .len = 1, ++ .pattern = scan_ff_pattern ++}; ++ ++static struct nand_bbt_descr largepage_flashbased = { ++ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, ++ .offs = 0, ++ .len = 2, ++ .pattern = scan_ff_pattern ++}; ++ ++static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 }; ++ ++static struct nand_bbt_descr agand_flashbased = { ++ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES, ++ .offs = 0x20, ++ .len = 6, ++ .pattern = scan_agand_pattern ++}; ++ ++/* Generic flash bbt decriptors ++*/ ++static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' }; ++static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' }; ++ ++static struct nand_bbt_descr bbt_main_descr = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, ++ .offs = 8, ++ .len = 4, ++ .veroffs = 12, ++ .maxblocks = 4, ++ .pattern = bbt_pattern ++}; ++ ++static struct nand_bbt_descr bbt_mirror_descr = { ++ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE ++ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, ++ .offs = 8, ++ .len = 4, ++ .veroffs = 12, ++ .maxblocks = 4, ++ .pattern = mirror_pattern ++}; ++ ++/** ++ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device ++ * @mtd: MTD device structure ++ * ++ * This function selects the default bad block table ++ * support for the device and calls the nand_scan_bbt function ++ * ++*/ ++int nand_default_bbt (struct mtd_info *mtd) ++{ ++ struct nand_chip *this = mtd->priv; ++ ++ /* Default for AG-AND. We must use a flash based ++ * bad block table as the devices have factory marked ++ * _good_ blocks. Erasing those blocks leads to loss ++ * of the good / bad information, so we _must_ store ++ * this information in a good / bad table during ++ * startup ++ */ ++ if (this->options & NAND_IS_AND) { ++ /* Use the default pattern descriptors */ ++ if (!this->bbt_td) { ++ this->bbt_td = &bbt_main_descr; ++ this->bbt_md = &bbt_mirror_descr; ++ } ++ this->options |= NAND_USE_FLASH_BBT; ++ return nand_scan_bbt (mtd, &agand_flashbased); ++ } ++ ++ ++ /* Is a flash based bad block table requested ? */ ++ if (this->options & NAND_USE_FLASH_BBT) { ++ /* Use the default pattern descriptors */ ++ if (!this->bbt_td) { ++ this->bbt_td = &bbt_main_descr; ++ this->bbt_md = &bbt_mirror_descr; ++ } ++ if (!this->badblock_pattern) { ++ this->badblock_pattern = (mtd->oobblock > 512) ? ++ &largepage_flashbased : &smallpage_flashbased; ++ } ++ } else { ++ this->bbt_td = NULL; ++ this->bbt_md = NULL; ++ if (!this->badblock_pattern) { ++ this->badblock_pattern = (mtd->oobblock > 512) ? ++ &largepage_memorybased : &smallpage_memorybased; ++ } ++ } ++ return nand_scan_bbt (mtd, this->badblock_pattern); ++} ++ ++/** ++ * nand_isbad_bbt - [NAND Interface] Check if a block is bad ++ * @mtd: MTD device structure ++ * @offs: offset in the device ++ * @allowbbt: allow access to bad block table region ++ * ++*/ ++int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt) ++{ ++ struct nand_chip *this = mtd->priv; ++ int block; ++ uint8_t res; ++ ++ /* Get block number * 2 */ ++ block = (int) (offs >> (this->bbt_erase_shift - 1)); ++ res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; ++ ++ DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n", ++ (unsigned int)offs, block >> 1, res); ++ ++ switch ((int)res) { ++ case 0x00: return 0; ++ case 0x01: return 1; ++ case 0x02: return allowbbt ? 0 : 1; ++ } ++ return 1; ++} +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.c 2006-08-04 16:38:14.000000000 +0200 +@@ -0,0 +1,246 @@ ++/* ++ * This file contains an ECC algorithm from Toshiba that detects and ++ * corrects 1 bit errors in a 256 byte block of data. ++ * ++ * Taken from drivers/mtd/nand/nand_ecc.c, modified for ++ * NAND flash boot on Etrax FS. ++ * ++ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com) ++ * Toshiba America Electronics Components, Inc. ++ * ++ * $Id: nand_ecc.c,v 1.1 2006/08/04 14:38:14 ricardw Exp $ ++ * ++ * This file is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 or (at your option) any ++ * later version. ++ * ++ * This file is distributed in the hope that it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this file; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. ++ * ++ * As a special exception, if other files instantiate templates or use ++ * macros or inline functions from these files, or you compile these ++ * files and link them with other works to produce a work based on these ++ * files, these files do not by themselves cause the resulting work to be ++ * covered by the GNU General Public License. However the source code for ++ * these files must still be made available in accordance with section (3) ++ * of the GNU General Public License. ++ * ++ * This exception does not invalidate any other reasons why a work based on ++ * this file might be covered by the GNU General Public License. ++ */ ++ ++#include <linux/types.h> ++#if 0 ++#include <linux/kernel.h> ++#include <linux/module.h> ++#endif ++#include "nand_ecc.h" ++ ++/* ++ * Pre-calculated 256-way 1 byte column parity ++ */ ++static const u_char nand_ecc_precalc_table[] = { ++ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00, ++ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, ++ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, ++ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, ++ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, ++ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, ++ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, ++ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, ++ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a, ++ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f, ++ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c, ++ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69, ++ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03, ++ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66, ++ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65, ++ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 ++}; ++ ++ ++/** ++ * nand_trans_result - [GENERIC] create non-inverted ECC ++ * @reg2: line parity reg 2 ++ * @reg3: line parity reg 3 ++ * @ecc_code: ecc ++ * ++ * Creates non-inverted ECC code from line parity ++ */ ++static void nand_trans_result(u_char reg2, u_char reg3, ++ u_char *ecc_code) ++{ ++ u_char a, b, i, tmp1, tmp2; ++ ++ /* Initialize variables */ ++ a = b = 0x80; ++ tmp1 = tmp2 = 0; ++ ++ /* Calculate first ECC byte */ ++ for (i = 0; i < 4; i++) { ++ if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ ++ tmp1 |= b; ++ b >>= 1; ++ if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ ++ tmp1 |= b; ++ b >>= 1; ++ a >>= 1; ++ } ++ ++ /* Calculate second ECC byte */ ++ b = 0x80; ++ for (i = 0; i < 4; i++) { ++ if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ ++ tmp2 |= b; ++ b >>= 1; ++ if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ ++ tmp2 |= b; ++ b >>= 1; ++ a >>= 1; ++ } ++ ++ /* Store two of the ECC bytes */ ++ ecc_code[0] = tmp1; ++ ecc_code[1] = tmp2; ++} ++ ++/** ++ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block ++ * @mtd: MTD block structure ++ * @dat: raw data ++ * @ecc_code: buffer for ECC ++ */ ++int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) ++{ ++ u_char idx, reg1, reg2, reg3; ++ int j; ++ ++ /* Initialize variables */ ++ reg1 = reg2 = reg3 = 0; ++ ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; ++ ++ /* Build up column parity */ ++ for(j = 0; j < 256; j++) { ++ ++ /* Get CP0 - CP5 from table */ ++ idx = nand_ecc_precalc_table[dat[j]]; ++ reg1 ^= (idx & 0x3f); ++ ++ /* All bit XOR = 1 ? */ ++ if (idx & 0x40) { ++ reg3 ^= (u_char) j; ++ reg2 ^= ~((u_char) j); ++ } ++ } ++ ++ /* Create non-inverted ECC code from line parity */ ++ nand_trans_result(reg2, reg3, ecc_code); ++ ++ /* Calculate final ECC code */ ++ ecc_code[0] = ~ecc_code[0]; ++ ecc_code[1] = ~ecc_code[1]; ++ ecc_code[2] = ((~reg1) << 2) | 0x03; ++ return 0; ++} ++ ++/** ++ * nand_correct_data - [NAND Interface] Detect and correct bit error(s) ++ * @mtd: MTD block structure ++ * @dat: raw data read from the chip ++ * @read_ecc: ECC from the chip ++ * @calc_ecc: the ECC calculated from raw data ++ * ++ * Detect and correct a 1 bit error for 256 byte block ++ */ ++int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) ++{ ++ u_char a, b, c, d1, d2, d3, add, bit, i; ++ ++ /* Do error detection */ ++ d1 = calc_ecc[0] ^ read_ecc[0]; ++ d2 = calc_ecc[1] ^ read_ecc[1]; ++ d3 = calc_ecc[2] ^ read_ecc[2]; ++ ++ if ((d1 | d2 | d3) == 0) { ++ /* No errors */ ++ return 0; ++ } ++ else { ++ a = (d1 ^ (d1 >> 1)) & 0x55; ++ b = (d2 ^ (d2 >> 1)) & 0x55; ++ c = (d3 ^ (d3 >> 1)) & 0x54; ++ ++ /* Found and will correct single bit error in the data */ ++ if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { ++ c = 0x80; ++ add = 0; ++ a = 0x80; ++ for (i=0; i<4; i++) { ++ if (d1 & c) ++ add |= a; ++ c >>= 2; ++ a >>= 1; ++ } ++ c = 0x80; ++ for (i=0; i<4; i++) { ++ if (d2 & c) ++ add |= a; ++ c >>= 2; ++ a >>= 1; ++ } ++ bit = 0; ++ b = 0x04; ++ c = 0x80; ++ for (i=0; i<3; i++) { ++ if (d3 & c) ++ bit |= b; ++ c >>= 2; ++ b >>= 1; ++ } ++ b = 0x01; ++ a = dat[add]; ++ a ^= (b << bit); ++ dat[add] = a; ++ return 1; ++ } ++ else { ++ i = 0; ++ while (d1) { ++ if (d1 & 0x01) ++ ++i; ++ d1 >>= 1; ++ } ++ while (d2) { ++ if (d2 & 0x01) ++ ++i; ++ d2 >>= 1; ++ } ++ while (d3) { ++ if (d3 & 0x01) ++ ++i; ++ d3 >>= 1; ++ } ++ if (i == 1) { ++ /* ECC Code Error Correction */ ++ read_ecc[0] = calc_ecc[0]; ++ read_ecc[1] = calc_ecc[1]; ++ read_ecc[2] = calc_ecc[2]; ++ return 2; ++ } ++ else { ++ /* Uncorrectable Error */ ++ return -1; ++ } ++ } ++ } ++ ++ /* Should never happen */ ++ return -1; ++} +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.h 2006-08-04 16:38:14.000000000 +0200 +@@ -0,0 +1,30 @@ ++/* ++ * drivers/mtd/nand_ecc.h ++ * ++ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) ++ * ++ * $Id: nand_ecc.h,v 1.1 2006/08/04 14:38:14 ricardw Exp $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * This file is the header for the ECC algorithm. ++ */ ++ ++#ifndef __MTD_NAND_ECC_H__ ++#define __MTD_NAND_ECC_H__ ++ ++struct mtd_info; ++ ++/* ++ * Calculate 3 byte ECC code for 256 byte block ++ */ ++int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); ++ ++/* ++ * Detect and correct a 1 bit error for 256 byte block ++ */ ++int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); ++ ++#endif /* __MTD_NAND_ECC_H__ */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ids.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ids.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ids.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ids.c 2006-08-04 16:38:14.000000000 +0200 +@@ -0,0 +1,133 @@ ++/* ++ * drivers/mtd/nandids.c ++ * ++ * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de) ++ * ++ * $Id: nand_ids.c,v 1.1 2006/08/04 14:38:14 ricardw Exp $ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#if 0 ++#include <linux/module.h> ++#endif ++ ++#include "nand.h" ++/* ++* Chip ID list ++* ++* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size, ++* options ++* ++* Pagesize; 0, 256, 512 ++* 0 get this information from the extended chip ID +++ 256 256 Byte page size ++* 512 512 Byte page size ++*/ ++struct nand_flash_dev nand_flash_ids[] = { ++ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0}, ++ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0}, ++ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0}, ++ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0}, ++ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0}, ++ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0}, ++ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0}, ++ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0}, ++ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0}, ++ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0}, ++ ++ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0}, ++ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0}, ++ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16}, ++ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16}, ++ ++ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0}, ++ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0}, ++ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16}, ++ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16}, ++ ++ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0}, ++ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0}, ++ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16}, ++ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16}, ++ ++ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0}, ++ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0}, ++ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16}, ++ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16}, ++ ++ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0}, ++ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0}, ++ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0}, ++ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16}, ++ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16}, ++ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16}, ++ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16}, ++ ++ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0}, ++ ++ /* These are the new chips with large page size. The pagesize ++ * and the erasesize is determined from the extended id bytes ++ */ ++ /*512 Megabit */ ++ {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ ++ /* 1 Gigabit */ ++ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ ++ /* 2 Gigabit */ ++ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ ++ /* 4 Gigabit */ ++ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ ++ /* 8 Gigabit */ ++ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ ++ /* 16 Gigabit */ ++ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR}, ++ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR}, ++ ++ /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout ! ++ * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes ++ * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7 ++ * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go ++ * There are more speed improvements for reads and writes possible, but not implemented now ++ */ ++ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, ++ ++ {NULL,} ++}; ++ ++/* ++* Manufacturer ID list ++*/ ++struct nand_manufacturers nand_manuf_ids[] = { ++ {NAND_MFR_TOSHIBA, "Toshiba"}, ++ {NAND_MFR_SAMSUNG, "Samsung"}, ++ {NAND_MFR_FUJITSU, "Fujitsu"}, ++ {NAND_MFR_NATIONAL, "National"}, ++ {NAND_MFR_RENESAS, "Renesas"}, ++ {NAND_MFR_STMICRO, "ST Micro"}, ++ {NAND_MFR_HYNIX, "Hynix"}, ++ {0x0, "Unknown"} ++}; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/rescue.ld linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/rescue.ld +--- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/rescue.ld 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/rescue.ld 2006-10-18 10:52:47.000000000 +0200 +@@ -1,20 +1,40 @@ +-MEMORY ++/*#OUTPUT_FORMAT(elf32-us-cris) */ ++OUTPUT_ARCH (crisv32) ++ ++MEMORY + { +- flash : ORIGIN = 0x00000000, +- LENGTH = 0x00100000 ++ bootblk : ORIGIN = 0x38000000, ++ LENGTH = 0x00004000 ++ intmem : ORIGIN = 0x38004000, ++ LENGTH = 0x00005000 + } + + SECTIONS + { + .text : + { +- stext = . ; ++ _stext = . ; + *(.text) +- etext = . ; +- } > flash ++ *(.rodata) ++ *(.rodata.*) ++ _etext = . ; ++ } > bootblk + .data : + { + *(.data) +- edata = . ; +- } > flash ++ _edata = . ; ++ } > bootblk ++ .bss : ++ { ++ _bss = . ; ++ *(.bss) ++ _end = ALIGN( 0x10 ) ; ++ } > intmem ++ ++ /* Get rid of stuff from EXPORT_SYMBOL(foo). */ ++ /DISCARD/ : ++ { ++ *(__ksymtab_strings) ++ *(__ksymtab) ++ } + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Kconfig +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Kconfig 2007-01-29 16:14:16.000000000 +0100 +@@ -6,14 +6,6 @@ + This option enables the ETRAX FS built-in 10/100Mbit Ethernet + controller. + +-config ETRAX_ETHERNET_HW_CSUM +- bool "Hardware accelerated ethernet checksum and scatter/gather" +- depends on ETRAX_ETHERNET +- depends on ETRAX_STREAMCOPROC +- default y +- help +- Hardware acceleration of checksumming and scatter/gather +- + config ETRAX_ETHERNET_IFACE0 + depends on ETRAX_ETHERNET + bool "Enable network interface 0" +@@ -23,6 +15,52 @@ + bool "Enable network interface 1 (uses DMA6 and DMA7)" + + choice ++ prompt "Eth0 led group" ++ depends on ETRAX_ETHERNET_IFACE0 ++ default ETRAX_ETH0_USE_LEDGRP0 ++ ++config ETRAX_ETH0_USE_LEDGRP0 ++ bool "Use LED grp 0" ++ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO ++ help ++ Use LED grp 0 for eth0 ++ ++config ETRAX_ETH0_USE_LEDGRP1 ++ bool "Use LED grp 1" ++ depends on ETRAX_NBR_LED_GRP_TWO ++ help ++ Use LED grp 1 for eth0 ++ ++config ETRAX_ETH0_USE_LEDGRPNULL ++ bool "Use no LEDs for eth0" ++ help ++ Use no LEDs for eth0 ++endchoice ++ ++choice ++ prompt "Eth1 led group" ++ depends on ETRAX_ETHERNET_IFACE1 ++ default ETRAX_ETH1_USE_LEDGRP1 ++ ++config ETRAX_ETH1_USE_LEDGRP0 ++ bool "Use LED grp 0" ++ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO ++ help ++ Use LED grp 0 for eth1 ++ ++config ETRAX_ETH1_USE_LEDGRP1 ++ bool "Use LED grp 1" ++ depends on ETRAX_NBR_LED_GRP_TWO ++ help ++ Use LED grp 1 for eth1 ++ ++config ETRAX_ETH1_USE_LEDGRPNULL ++ bool "Use no LEDs for eth1" ++ help ++ Use no LEDs for eth1 ++endchoice ++ ++choice + prompt "Network LED behavior" + depends on ETRAX_ETHERNET + default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY +@@ -56,10 +94,25 @@ + config ETRAXFS_SERIAL + bool "Serial-port support" + depends on ETRAX_ARCH_V32 ++ select SERIAL_CORE ++ select SERIAL_CORE_CONSOLE + help + Enables the ETRAX FS serial driver for ser0 (ttyS0) + You probably want this enabled. + ++config ETRAX_RS485 ++ bool "RS-485 support" ++ depends on ETRAXFS_SERIAL ++ help ++ Enables support for RS-485 serial communication. ++ ++config ETRAX_RS485_DISABLE_RECEIVER ++ bool "Disable serial receiver" ++ depends on ETRAX_RS485 ++ help ++ It is necessary to disable the serial receiver to avoid serial ++ loopback. Not all products are able to do this in software only. ++ + config ETRAX_SERIAL_PORT0 + bool "Serial port 0 enabled" + depends on ETRAXFS_SERIAL +@@ -70,6 +123,31 @@ + ser0 can use dma4 or dma6 for output and dma5 or dma7 for input. + + choice ++ prompt "Ser0 default port type " ++ depends on ETRAX_SERIAL_PORT0 ++ default ETRAX_SERIAL_PORT0_TYPE_232 ++ help ++ Type of serial port. ++ ++config ETRAX_SERIAL_PORT0_TYPE_232 ++ bool "Ser0 is a RS-232 port" ++ help ++ Configure serial port 0 to be a RS-232 port. ++ ++config ETRAX_SERIAL_PORT0_TYPE_485HD ++ bool "Ser0 is a half duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 0 to be a half duplex (two wires) RS-485 port. ++ ++config ETRAX_SERIAL_PORT0_TYPE_485FD ++ bool "Ser0 is a full duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 0 to be a full duplex (four wires) RS-485 port. ++endchoice ++ ++choice + prompt "Ser0 DMA in channel " + depends on ETRAX_SERIAL_PORT0 + default ETRAX_SERIAL_PORT0_NO_DMA_IN +@@ -139,6 +217,31 @@ + Enables the ETRAX FS serial driver for ser1 (ttyS1). + + choice ++ prompt "Ser1 default port type" ++ depends on ETRAX_SERIAL_PORT1 ++ default ETRAX_SERIAL_PORT1_TYPE_232 ++ help ++ Type of serial port. ++ ++config ETRAX_SERIAL_PORT1_TYPE_232 ++ bool "Ser1 is a RS-232 port" ++ help ++ Configure serial port 1 to be a RS-232 port. ++ ++config ETRAX_SERIAL_PORT1_TYPE_485HD ++ bool "Ser1 is a half duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 1 to be a half duplex (two wires) RS-485 port. ++ ++config ETRAX_SERIAL_PORT1_TYPE_485FD ++ bool "Ser1 is a full duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 1 to be a full duplex (four wires) RS-485 port. ++endchoice ++ ++choice + prompt "Ser1 DMA in channel " + depends on ETRAX_SERIAL_PORT1 + default ETRAX_SERIAL_PORT1_NO_DMA_IN +@@ -210,6 +313,31 @@ + Enables the ETRAX FS serial driver for ser2 (ttyS2). + + choice ++ prompt "Ser2 default port type" ++ depends on ETRAX_SERIAL_PORT2 ++ default ETRAX_SERIAL_PORT2_TYPE_232 ++ help ++ What DMA channel to use for ser2 ++ ++config ETRAX_SERIAL_PORT2_TYPE_232 ++ bool "Ser2 is a RS-232 port" ++ help ++ Configure serial port 2 to be a RS-232 port. ++ ++config ETRAX_SERIAL_PORT2_TYPE_485HD ++ bool "Ser2 is a half duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 2 to be a half duplex (two wires) RS-485 port. ++ ++config ETRAX_SERIAL_PORT2_TYPE_485FD ++ bool "Ser2 is a full duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 2 to be a full duplex (four wires) RS-485 port. ++endchoice ++ ++choice + prompt "Ser2 DMA in channel " + depends on ETRAX_SERIAL_PORT2 + default ETRAX_SERIAL_PORT2_NO_DMA_IN +@@ -279,6 +407,31 @@ + Enables the ETRAX FS serial driver for ser3 (ttyS3). + + choice ++ prompt "Ser3 default port type" ++ depends on ETRAX_SERIAL_PORT3 ++ default ETRAX_SERIAL_PORT3_TYPE_232 ++ help ++ What DMA channel to use for ser3. ++ ++config ETRAX_SERIAL_PORT3_TYPE_232 ++ bool "Ser3 is a RS-232 port" ++ help ++ Configure serial port 3 to be a RS-232 port. ++ ++config ETRAX_SERIAL_PORT3_TYPE_485HD ++ bool "Ser3 is a half duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 3 to be a half duplex (two wires) RS-485 port. ++ ++config ETRAX_SERIAL_PORT3_TYPE_485FD ++ bool "Ser3 is a full duplex RS-485 port" ++ depends on ETRAX_RS485 ++ help ++ Configure serial port 3 to be a full duplex (four wires) RS-485 port. ++endchoice ++ ++choice + prompt "Ser3 DMA in channel " + depends on ETRAX_SERIAL_PORT3 + default ETRAX_SERIAL_PORT3_NO_DMA_IN +@@ -341,38 +494,6 @@ + string "Ser 3 CD bit (empty = not used)" + depends on ETRAX_SERIAL_PORT3 + +-config ETRAX_RS485 +- bool "RS-485 support" +- depends on ETRAX_SERIAL +- help +- Enables support for RS-485 serial communication. For a primer on +- RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>. +- +-config ETRAX_RS485_DISABLE_RECEIVER +- bool "Disable serial receiver" +- depends on ETRAX_RS485 +- help +- It is necessary to disable the serial receiver to avoid serial +- loopback. Not all products are able to do this in software only. +- Axis 2400/2401 must disable receiver. +- +-config ETRAX_AXISFLASHMAP +- bool "Axis flash-map support" +- depends on ETRAX_ARCH_V32 +- select MTD +- select MTD_CFI +- select MTD_CFI_AMDSTD +- select MTD_OBSOLETE_CHIPS +- select MTD_AMDSTD +- select MTD_CHAR +- select MTD_BLOCK +- select MTD_PARTITIONS +- select MTD_CONCAT +- select MTD_COMPLEX_MAPPINGS +- help +- This option enables MTD mapping of flash devices. Needed to use +- flash memories. If unsure, say Y. +- + config ETRAX_SYNCHRONOUS_SERIAL + bool "Synchronous serial-port support" + depends on ETRAX_ARCH_V32 +@@ -405,6 +526,31 @@ + A synchronous serial port can run in manual or DMA mode. + Selecting this option will make it run in DMA mode. + ++config ETRAX_AXISFLASHMAP ++ bool "Axis flash-map support" ++ depends on ETRAX_ARCH_V32 ++ select MTD ++ select MTD_CFI ++ select MTD_CFI_AMDSTD ++ select MTD_JEDECPROBE ++ select MTD_CHAR ++ select MTD_BLOCK ++ select MTD_PARTITIONS ++ select MTD_CONCAT ++ select MTD_COMPLEX_MAPPINGS ++ help ++ This option enables MTD mapping of flash devices. Needed to use ++ flash memories. If unsure, say Y. ++ ++config ETRAX_AXISFLASHMAP_MTD0WHOLE ++ bool "MTD0 is whole boot flash device" ++ depends on ETRAX_AXISFLASHMAP ++ default N ++ help ++ When this option is not set, mtd0 refers to the first partition ++ on the boot flash device. When set, mtd0 refers to the whole ++ device, with mtd1 referring to the first partition etc. ++ + config ETRAX_PTABLE_SECTOR + int "Byte-offset of partition table sector" + depends on ETRAX_AXISFLASHMAP +@@ -425,11 +571,19 @@ + This option enables MTD mapping of NAND flash devices. Needed to use + NAND flash memories. If unsure, say Y. + ++config ETRAX_NANDBOOT ++ bool "Boot from NAND flash" ++ depends on ETRAX_NANDFLASH ++ help ++ This options enables booting from NAND flash devices. ++ Say Y if your boot code, kernel and root file system is in ++ NAND flash. Say N if they are in NOR flash. ++ + config ETRAX_I2C + bool "I2C driver" + depends on ETRAX_ARCH_V32 + help +- This option enabled the I2C driver used by e.g. the RTC driver. ++ This option enables the I2C driver used by e.g. the RTC driver. + + config ETRAX_I2C_DATA_PORT + string "I2C data pin" +@@ -476,18 +630,19 @@ + Remember that you need to setup the port directions appropriately in + the General configuration. + +-config ETRAX_PA_BUTTON_BITMASK +- hex "PA-buttons bitmask" ++config ETRAX_VIRTUAL_GPIO ++ bool "Virtual GPIO support" + depends on ETRAX_GPIO +- default "0x02" + help +- This is a bitmask (8 bits) with information about what bits on PA +- that are used for buttons. +- Most products has a so called TEST button on PA1, if that is true +- use 0x02 here. +- Use 00 if there are no buttons on PA. +- If the bitmask is <> 00 a button driver will be included in the gpio +- driver. ETRAX general I/O support must be enabled. ++ Enables the virtual Etrax general port device (major 120, minor 6). ++ It uses an I/O expander for the I2C-bus. ++ ++config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN ++ int "Virtual GPIO interrupt pin on PA pin" ++ range 0 7 ++ depends on ETRAX_VIRTUAL_GPIO ++ help ++ The pin to use on PA for virtual gpio interrupt. + + config ETRAX_PA_CHANGEABLE_DIR + hex "PA user changeable dir mask" +@@ -584,6 +739,25 @@ + that a user can change the value on using ioctl's. + Bit set = changeable. + ++config ETRAX_PV_CHANGEABLE_DIR ++ hex "PV user changeable dir mask" ++ depends on ETRAX_VIRTUAL_GPIO ++ default "0x0000" ++ help ++ This is a bitmask (16 bits) with information of what bits in PV ++ that a user can change direction on using ioctl's. ++ Bit set = changeable. ++ You probably want 0x0000 here, but it depends on your hardware. ++ ++config ETRAX_PV_CHANGEABLE_BITS ++ hex "PV user changeable bits mask" ++ depends on ETRAX_VIRTUAL_GPIO ++ default "0x0000" ++ help ++ This is a bitmask (16 bits) with information of what bits in PV ++ that a user can change the value on using ioctl's. ++ Bit set = changeable. ++ + config ETRAX_IDE + bool "ATA/IDE support" + depends on ETRAX_ARCH_V32 +@@ -603,11 +777,11 @@ + select HOTPLUG + select PCCARD_NONSTATIC + help +- Enabled the ETRAX Carbus driver. ++ Enabled the ETRAX Carbus driver. + + config PCI + bool +- depends on ETRAX_CARDBUS ++ depends on ETRAX_CARDBUS + default y + + config ETRAX_IOP_FW_LOAD +@@ -623,3 +797,175 @@ + help + This option enables a driver for the stream co-processor + for cryptographic operations. ++ ++source drivers/mmc/Kconfig ++ ++config ETRAX_SPI_MMC ++# Make this one of several "choices" (possible simultaneously but ++# suggested uniquely) when an IOP driver emerges for "real" MMC/SD ++# protocol support. ++ tristate ++ depends on MMC ++ default MMC ++ select SPI ++ select MMC_SPI ++ select ETRAX_SPI_MMC_BOARD ++ ++# For the parts that can't be a module (due to restrictions in ++# framework elsewhere). ++config ETRAX_SPI_MMC_BOARD ++ boolean ++ default n ++ ++# While the board info is MMC_SPI only, the drivers are written to be ++# independent of MMC_SPI, so we'll keep SPI non-dependent on the ++# MMC_SPI config choices (well, except for a single depends-on-line ++# for the board-info file until a separate non-MMC SPI board file ++# emerges). ++# FIXME: When that happens, we'll need to be able to ask for and ++# configure non-MMC SPI ports together with MMC_SPI ports (if multiple ++# SPI ports are enabled). ++ ++config ETRAX_SPI_SSER0 ++ tristate "SPI using synchronous serial port 0 (sser0)" ++ depends on ETRAX_SPI_MMC ++ default m if MMC_SPI=m ++ default y if MMC_SPI=y ++ default y if MMC_SPI=n ++ select SPI_ETRAX_SSER ++ help ++ Say Y for an MMC/SD socket connected to synchronous serial port 0, ++ or for devices using the SPI protocol on that port. Say m if you ++ want to build it as a module, which will be named spi_crisv32_sser. ++ (You need to select MMC separately.) ++ ++config ETRAX_SPI_SSER0_DMA ++ bool "DMA for SPI on sser0 enabled" ++ depends on ETRAX_SPI_SSER0 ++ depends on !ETRAX_SERIAL_PORT1_DMA4_OUT && !ETRAX_SERIAL_PORT1_DMA5_IN ++ default y ++ help ++ Say Y if using DMA (dma4/dma5) for SPI on synchronous serial port 0. ++ ++config ETRAX_SPI_MMC_CD_SSER0_PIN ++ string "MMC/SD card detect pin for SPI on sser0" ++ depends on ETRAX_SPI_SSER0 && MMC_SPI ++ default "pd11" ++ help ++ The pin to use for SD/MMC card detect. This pin should be pulled up ++ and grounded when a card is present. If defined as " " (space), no ++ pin is selected. A card must then always be inserted for proper ++ action. ++ ++config ETRAX_SPI_MMC_WP_SSER0_PIN ++ string "MMC/SD card write-protect pin for SPI on sser0" ++ depends on ETRAX_SPI_SSER0 && MMC_SPI ++ default "pd10" ++ help ++ The pin to use for the SD/MMC write-protect signal for a memory ++ card. If defined as " " (space), the card is considered writable. ++ ++config ETRAX_SPI_SSER1 ++ tristate "SPI using synchronous serial port 1 (sser1)" ++ depends on ETRAX_SPI_MMC ++ default m if MMC_SPI=m && ETRAX_SPI_SSER0=n ++ default y if MMC_SPI=y && ETRAX_SPI_SSER0=n ++ default y if MMC_SPI=n && ETRAX_SPI_SSER0=n ++ select SPI_ETRAX_SSER ++ help ++ Say Y for an MMC/SD socket connected to synchronous serial port 1, ++ or for devices using the SPI protocol on that port. Say m if you ++ want to build it as a module, which will be named spi_crisv32_sser. ++ (You need to select MMC separately.) ++ ++config ETRAX_SPI_SSER1_DMA ++ bool "DMA for SPI on sser1 enabled" ++ depends on ETRAX_SPI_SSER1 && !ETRAX_ETHERNET_IFACE1 ++ depends on !ETRAX_SERIAL_PORT0_DMA6_OUT && !ETRAX_SERIAL_PORT0_DMA7_IN ++ default y ++ help ++ Say Y if using DMA (dma6/dma7) for SPI on synchronous serial port 1. ++ ++config ETRAX_SPI_MMC_CD_SSER1_PIN ++ string "MMC/SD card detect pin for SPI on sser1" ++ depends on ETRAX_SPI_SSER1 && MMC_SPI ++ default "pd12" ++ help ++ The pin to use for SD/MMC card detect. This pin should be pulled up ++ and grounded when a card is present. If defined as " " (space), no ++ pin is selected. A card must then always be inserted for proper ++ action. ++ ++config ETRAX_SPI_MMC_WP_SSER1_PIN ++ string "MMC/SD card write-protect pin for SPI on sser1" ++ depends on ETRAX_SPI_SSER1 && MMC_SPI ++ default "pd9" ++ help ++ The pin to use for the SD/MMC write-protect signal for a memory ++ card. If defined as " " (space), the card is considered writable. ++ ++config ETRAX_SPI_GPIO ++ tristate "Bitbanged SPI using gpio pins" ++ depends on ETRAX_SPI_MMC ++ select SPI_ETRAX_GPIO ++ default m if MMC_SPI=m && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n ++ default y if MMC_SPI=y && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n ++ default y if MMC_SPI=n && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n ++ help ++ Say Y for an MMC/SD socket connected to general I/O pins (but not ++ a complete synchronous serial ports), or for devices using the SPI ++ protocol on general I/O pins. Slow and slows down the system. ++ Say m to build it as a module, which will be called spi_crisv32_gpio. ++ (You need to select MMC separately.) ++ ++# The default match that of sser0, only because that's how it was tested. ++config ETRAX_SPI_CS_PIN ++ string "SPI chip select pin" ++ depends on ETRAX_SPI_GPIO ++ default "pc3" ++ help ++ The pin to use for SPI chip select. ++ ++config ETRAX_SPI_CLK_PIN ++ string "SPI clock pin" ++ depends on ETRAX_SPI_GPIO ++ default "pc1" ++ help ++ The pin to use for the SPI clock. ++ ++config ETRAX_SPI_DATAIN_PIN ++ string "SPI MISO (data in) pin" ++ depends on ETRAX_SPI_GPIO ++ default "pc16" ++ help ++ The pin to use for SPI data in from the device. ++ ++config ETRAX_SPI_DATAOUT_PIN ++ string "SPI MOSI (data out) pin" ++ depends on ETRAX_SPI_GPIO ++ default "pc0" ++ help ++ The pin to use for SPI data out to the device. ++ ++config ETRAX_SPI_MMC_CD_GPIO_PIN ++ string "MMC/SD card detect pin for SPI using gpio (space for none)" ++ depends on ETRAX_SPI_GPIO && MMC_SPI ++ default "pd11" ++ help ++ The pin to use for SD/MMC card detect. This pin should be pulled up ++ and grounded when a card is present. If defined as " " (space), no ++ pin is selected. A card must then always be inserted for proper ++ action. ++ ++config ETRAX_SPI_MMC_WP_GPIO_PIN ++ string "MMC/SD card write-protect pin for SPI using gpio (space for none)" ++ depends on ETRAX_SPI_GPIO && MMC_SPI ++ default "pd10" ++ help ++ The pin to use for the SD/MMC write-protect signal for a memory ++ card. If defined as " " (space), the card is considered writable. ++ ++# Avoid choices causing non-working configs by conditionalizing the inclusion. ++if ETRAX_SPI_MMC ++source drivers/spi/Kconfig ++endif +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Makefile 2007-01-29 16:14:16.000000000 +0100 +@@ -11,3 +11,4 @@ + obj-$(CONFIG_ETRAX_I2C) += i2c.o + obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o + obj-$(CONFIG_PCI) += pci/ ++obj-$(CONFIG_ETRAX_SPI_MMC_BOARD) += board_mmcspi.o +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/axisflashmap.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/axisflashmap.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/axisflashmap.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/axisflashmap.c 2007-02-06 17:37:50.000000000 +0100 +@@ -11,7 +11,7 @@ + * partition split defined below. + * + * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5 +- * with minor changes. ++ * with quite a few changes now. + * + */ + +@@ -27,6 +27,8 @@ + #include <linux/mtd/mtdram.h> + #include <linux/mtd/partitions.h> + ++#include <linux/cramfs_fs.h> ++ + #include <asm/arch/hwregs/config_defs.h> + #include <asm/axisflashmap.h> + #include <asm/mmu.h> +@@ -37,16 +39,24 @@ + #define FLASH_UNCACHED_ADDR KSEG_E + #define FLASH_CACHED_ADDR KSEG_F + ++#define PAGESIZE (512) ++ + #if CONFIG_ETRAX_FLASH_BUSWIDTH==1 + #define flash_data __u8 + #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2 + #define flash_data __u16 + #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4 +-#define flash_data __u16 ++#define flash_data __u32 + #endif + + /* From head.S */ +-extern unsigned long romfs_start, romfs_length, romfs_in_flash; ++extern unsigned long romfs_in_flash; /* 1 when romfs_start, _length in flash */ ++extern unsigned long romfs_start, romfs_length; ++extern unsigned long nand_boot; /* 1 when booted from nand flash */ ++ ++struct partition_name { ++ char name[6]; ++}; + + /* The master mtd for the entire flash. */ + struct mtd_info* axisflash_mtd = NULL; +@@ -112,32 +122,20 @@ + .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE + }; + +-/* If no partition-table was found, we use this default-set. */ +-#define MAX_PARTITIONS 7 +-#define NUM_DEFAULT_PARTITIONS 3 ++#define MAX_PARTITIONS 7 ++#ifdef CONFIG_ETRAX_NANDBOOT ++#define NUM_DEFAULT_PARTITIONS 4 ++#define DEFAULT_ROOTFS_PARTITION_NO 2 ++#define DEFAULT_MEDIA_SIZE 0x2000000 /* 32 megs */ ++#else ++#define NUM_DEFAULT_PARTITIONS 3 ++#define DEFAULT_ROOTFS_PARTITION_NO (-1) ++#define DEFAULT_MEDIA_SIZE 0x800000 /* 8 megs */ ++#endif + +-/* +- * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the +- * size of one flash block and "filesystem"-partition needs 5 blocks to be able +- * to use JFFS. +- */ +-static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { +- { +- .name = "boot firmware", +- .size = CONFIG_ETRAX_PTABLE_SECTOR, +- .offset = 0 +- }, +- { +- .name = "kernel", +- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), +- .offset = CONFIG_ETRAX_PTABLE_SECTOR +- }, +- { +- .name = "filesystem", +- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, +- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) +- } +-}; ++#if (MAX_PARTITIONS < NUM_DEFAULT_PARTITIONS) ++#error MAX_PARTITIONS must be >= than NUM_DEFAULT_PARTITIONS ++#endif + + /* Initialize the ones normally used. */ + static struct mtd_partition axis_partitions[MAX_PARTITIONS] = { +@@ -178,6 +176,56 @@ + }, + }; + ++ ++/* If no partition-table was found, we use this default-set. ++ * Default flash size is 8MB (NOR). CONFIG_ETRAX_PTABLE_SECTOR is most ++ * likely the size of one flash block and "filesystem"-partition needs ++ * to be >=5 blocks to be able to use JFFS. ++ */ ++static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { ++ { ++ .name = "boot firmware", ++ .size = CONFIG_ETRAX_PTABLE_SECTOR, ++ .offset = 0 ++ }, ++ { ++ .name = "kernel", ++ .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, ++ .offset = CONFIG_ETRAX_PTABLE_SECTOR ++ }, ++#define FILESYSTEM_SECTOR (11 * CONFIG_ETRAX_PTABLE_SECTOR) ++#ifdef CONFIG_ETRAX_NANDBOOT ++ { ++ .name = "rootfs", ++ .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR, ++ .offset = FILESYSTEM_SECTOR ++ }, ++#undef FILESYSTEM_SECTOR ++#define FILESYSTEM_SECTOR (21 * CONFIG_ETRAX_PTABLE_SECTOR) ++#endif ++ { ++ .name = "rwfs", ++ .size = DEFAULT_MEDIA_SIZE - FILESYSTEM_SECTOR, ++ .offset = FILESYSTEM_SECTOR ++ } ++}; ++ ++#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE ++/* Main flash device */ ++static struct mtd_partition main_partition = { ++ .name = "main", ++ .size = 0, ++ .offset = 0 ++}; ++#endif ++ ++/* Auxilliary partition if we find another flash */ ++static struct mtd_partition aux_partition = { ++ .name = "aux", ++ .size = 0, ++ .offset = 0 ++}; ++ + /* + * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash + * chips in that order (because the amd_flash-driver is faster). +@@ -186,23 +234,23 @@ + { + struct mtd_info *mtd_cs = NULL; + +- printk(KERN_INFO ++ printk(KERN_INFO + "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n", + map_cs->name, map_cs->size, map_cs->map_priv_1); + +-#ifdef CONFIG_MTD_AMDSTD +- mtd_cs = do_map_probe("amd_flash", map_cs); +-#endif + #ifdef CONFIG_MTD_CFI ++ mtd_cs = do_map_probe("cfi_probe", map_cs); ++#endif ++#ifdef CONFIG_MTD_JEDECPROBE + if (!mtd_cs) { +- mtd_cs = do_map_probe("cfi_probe", map_cs); ++ mtd_cs = do_map_probe("jedec_probe", map_cs); + } + #endif + + return mtd_cs; + } + +-/* ++/* + * Probe each chip select individually for flash chips. If there are chips on + * both cse0 and cse1, the mtd_info structs will be concatenated to one struct + * so that MTD partitions can cross chip boundries. +@@ -217,22 +265,17 @@ + { + struct mtd_info *mtd_cse0; + struct mtd_info *mtd_cse1; +- struct mtd_info *mtd_nand = NULL; + struct mtd_info *mtd_total; +- struct mtd_info *mtds[3]; ++ struct mtd_info *mtds[2]; + int count = 0; + + if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL) + mtds[count++] = mtd_cse0; + if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL) + mtds[count++] = mtd_cse1; ++ + +-#ifdef CONFIG_ETRAX_NANDFLASH +- if ((mtd_nand = crisv32_nand_flash_probe()) != NULL) +- mtds[count++] = mtd_nand; +-#endif +- +- if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) { ++ if (!mtd_cse0 && !mtd_cse1) { + /* No chip found. */ + return NULL; + } +@@ -248,7 +291,7 @@ + */ + mtd_total = mtd_concat_create(mtds, + count, +- "cse0+cse1+nand"); ++ "cse0+cse1"); + #else + printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel " + "(mis)configuration!\n", map_cse0.name, map_cse1.name); +@@ -260,57 +303,155 @@ + + /* The best we can do now is to only use what we found + * at cse0. +- */ ++ */ + mtd_total = mtd_cse0; + map_destroy(mtd_cse1); + } + } else { +- mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand; +- ++ mtd_total = mtd_cse0 ? mtd_cse0 : mtd_cse1; ++ + } + + return mtd_total; + } + +-extern unsigned long crisv32_nand_boot; +-extern unsigned long crisv32_nand_cramfs_offset; +- + /* + * Probe the flash chip(s) and, if it succeeds, read the partition-table + * and register the partitions with MTD. + */ + static int __init init_axis_flash(void) + { +- struct mtd_info *mymtd; ++ struct mtd_info *main_mtd; ++ struct mtd_info *aux_mtd = NULL; + int err = 0; + int pidx = 0; + struct partitiontable_head *ptable_head = NULL; + struct partitiontable_entry *ptable; +- int use_default_ptable = 1; /* Until proven otherwise. */ +- const char *pmsg = KERN_INFO " /dev/flash%d at 0x%08x, size 0x%08x\n"; +- static char page[512]; ++ int ptable_ok = 0; ++ static char page[PAGESIZE]; + size_t len; ++ int ram_rootfs_partition = -1; /* -1 => no RAM rootfs partition */ ++ int part; ++ ++ /* We need a root fs. If it resides in RAM, we need to use an ++ * MTDRAM device, so it must be enabled in the kernel config, ++ * but its size must be configured as 0 so as not to conflict ++ * with our usage. ++ */ ++#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) ++ if (!romfs_in_flash && !nand_boot) { ++ printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " ++ "device; configure CONFIG_MTD_MTDRAM with size = 0!\n"); ++ panic("This kernel cannot boot from RAM!\n"); ++ } ++#endif + + #ifndef CONFIG_ETRAXFS_SIM +- mymtd = flash_probe(); +- mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page); +- ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET); ++ main_mtd = flash_probe(); ++ if (main_mtd) ++ printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n", ++ main_mtd->name, main_mtd->size); ++ ++#ifdef CONFIG_ETRAX_NANDFLASH ++ aux_mtd = crisv32_nand_flash_probe(); ++ if (aux_mtd) ++ printk(KERN_INFO "%s: 0x%08x bytes of NAND flash memory.\n", ++ aux_mtd->name, aux_mtd->size); + +- if (!mymtd) { ++#ifdef CONFIG_ETRAX_NANDBOOT ++ { ++ struct mtd_info *tmp_mtd; ++ ++ printk(KERN_INFO "axisflashmap: Set to boot from NAND flash, " ++ "making NAND flash primary device.\n"); ++ tmp_mtd = main_mtd; ++ main_mtd = aux_mtd; ++ aux_mtd = tmp_mtd; ++ } ++#endif /* CONFIG_ETRAX_NANDBOOT */ ++#endif /* CONFIG_ETRAX_NANDFLASH */ ++ ++ if (!main_mtd && !aux_mtd) { + /* There's no reason to use this module if no flash chip can + * be identified. Make sure that's understood. + */ + printk(KERN_INFO "axisflashmap: Found no flash chip.\n"); +- } else { +- printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n", +- mymtd->name, mymtd->size); +- axisflash_mtd = mymtd; + } + +- if (mymtd) { +- mymtd->owner = THIS_MODULE; ++#if 0 /* Dump flash memory so we can see what is going on */ ++ if (main_mtd) { ++ int sectoraddr, i; ++ for (sectoraddr = 0; sectoraddr < 2*65536+4096; sectoraddr += PAGESIZE) { ++ main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, page); ++ printk(KERN_INFO ++ "Sector at %d (length %d):\n", ++ sectoraddr, len); ++ for (i = 0; i < PAGESIZE; i += 16) { ++ printk(KERN_INFO ++ "%02x %02x %02x %02x %02x %02x %02x %02x " ++ "%02x %02x %02x %02x %02x %02x %02x %02x\n", ++ page[i] & 255, page[i+1] & 255, ++ page[i+2] & 255, page[i+3] & 255, ++ page[i+4] & 255, page[i+5] & 255, ++ page[i+6] & 255, page[i+7] & 255, ++ page[i+8] & 255, page[i+9] & 255, ++ page[i+10] & 255, page[i+11] & 255, ++ page[i+12] & 255, page[i+13] & 255, ++ page[i+14] & 255, page[i+15] & 255); ++ } ++ ++ } ++ } ++#endif ++ ++ if (main_mtd) { ++ main_mtd->owner = THIS_MODULE; ++ axisflash_mtd = main_mtd; ++ ++ loff_t ptable_sector = CONFIG_ETRAX_PTABLE_SECTOR; ++ ++ pidx++; /* First partition (rescue) is always set to the default. */ ++#ifdef CONFIG_ETRAX_NANDBOOT ++ /* We know where the partition table should be located, ++ * it will be in first good block after that. ++ */ ++ int blockstat; ++ do { ++ blockstat = main_mtd->block_isbad(main_mtd, ptable_sector); ++ if (blockstat < 0) ++ ptable_sector = 0; /* read error */ ++ else if (blockstat) ++ ptable_sector += main_mtd->erasesize; ++ } while (blockstat && ptable_sector); ++#endif ++ if (ptable_sector) { ++ main_mtd->read(main_mtd, ptable_sector, PAGESIZE, &len, page); ++ ptable_head = &((struct partitiontable *) page)->head; ++ } ++ ++#if 0 /* Dump partition table so we can see what is going on */ ++ printk(KERN_INFO ++ "axisflashmap: flash read %d bytes at 0x%08x, data: " ++ "%02x %02x %02x %02x %02x %02x %02x %02x\n", ++ len, CONFIG_ETRAX_PTABLE_SECTOR, ++ page[0] & 255, page[1] & 255, ++ page[2] & 255, page[3] & 255, ++ page[4] & 255, page[5] & 255, ++ page[6] & 255, page[7] & 255); ++ printk(KERN_INFO ++ "axisflashmap: partition table offset %d, data: " ++ "%02x %02x %02x %02x %02x %02x %02x %02x\n", ++ PARTITION_TABLE_OFFSET, ++ page[PARTITION_TABLE_OFFSET+0] & 255, ++ page[PARTITION_TABLE_OFFSET+1] & 255, ++ page[PARTITION_TABLE_OFFSET+2] & 255, ++ page[PARTITION_TABLE_OFFSET+3] & 255, ++ page[PARTITION_TABLE_OFFSET+4] & 255, ++ page[PARTITION_TABLE_OFFSET+5] & 255, ++ page[PARTITION_TABLE_OFFSET+6] & 255, ++ page[PARTITION_TABLE_OFFSET+7] & 255); ++#endif + } +- pidx++; /* First partition is always set to the default. */ + + if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC) + && (ptable_head->size < +@@ -323,7 +464,6 @@ + /* Looks like a start, sane length and end of a + * partition table, lets check csum etc. + */ +- int ptable_ok = 0; + struct partitiontable_entry *max_addr = + (struct partitiontable_entry *) + ((unsigned long)ptable_head + sizeof(*ptable_head) + +@@ -331,7 +471,7 @@ + unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR; + unsigned char *p; + unsigned long csum = 0; +- ++ + ptable = (struct partitiontable_entry *) + ((unsigned long)ptable_head + sizeof(*ptable_head)); + +@@ -343,108 +483,177 @@ + csum += *p++; + csum += *p++; + csum += *p++; +- } ++ } + ptable_ok = (csum == ptable_head->checksum); + + /* Read the entries and use/show the info. */ +- printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n", ++ printk(KERN_INFO "axisflashmap: " ++ "Found a%s partition table at 0x%p-0x%p.\n", + (ptable_ok ? " valid" : "n invalid"), ptable_head, + max_addr); + + /* We have found a working bootblock. Now read the +- * partition table. Scan the table. It ends when +- * there is 0xffffffff, that is, empty flash. ++ * partition table. Scan the table. It ends with 0xffffffff. + */ + while (ptable_ok +- && ptable->offset != 0xffffffff ++ && ptable->offset != PARTITIONTABLE_END_MARKER + && ptable < max_addr +- && pidx < MAX_PARTITIONS) { ++ && pidx < MAX_PARTITIONS - 1) { + +- axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0); +- axis_partitions[pidx].size = ptable->size; +- +- printk(pmsg, pidx, axis_partitions[pidx].offset, +- axis_partitions[pidx].size); ++ axis_partitions[pidx].offset = offset + ptable->offset; ++#ifdef CONFIG_ETRAX_NANDFLASH ++ if (main_mtd->type == MTD_NANDFLASH) { ++ axis_partitions[pidx].size = ++ (((ptable+1)->offset == ++ PARTITIONTABLE_END_MARKER) ? ++ main_mtd->size : ++ ((ptable+1)->offset + offset)) - ++ (ptable->offset + offset); ++ ++ } else ++#endif /* CONFIG_ETRAX_NANDFLASH */ ++ axis_partitions[pidx].size = ptable->size; ++#ifdef CONFIG_ETRAX_NANDBOOT ++ /* Save partition number of jffs2 ro partition. ++ * Needed if RAM booting or root file system in RAM. ++ */ ++ if (!nand_boot && ++ ram_rootfs_partition < 0 && /* not already set */ ++ ptable->type == PARTITION_TYPE_JFFS2 && ++ (ptable->flags & PARTITION_FLAGS_READONLY_MASK) == ++ PARTITION_FLAGS_READONLY) ++ ram_rootfs_partition = pidx; ++#endif /* CONFIG_ETRAX_NANDBOOT */ + pidx++; + ptable++; + } +- use_default_ptable = !ptable_ok; + } + +- if (romfs_in_flash) { +- /* Add an overlapping device for the root partition (romfs). */ ++ /* Decide whether to use default partition table. */ ++ /* Only use default table if we actually have a device (main_mtd) */ + +- axis_partitions[pidx].name = "romfs"; +- if (crisv32_nand_boot) { +- char* data = kmalloc(1024, GFP_KERNEL); +- int len; +- int offset = crisv32_nand_cramfs_offset & ~(1024-1); +- char* tmp; +- +- mymtd->read(mymtd, offset, 1024, &len, data); +- tmp = &data[crisv32_nand_cramfs_offset % 512]; +- axis_partitions[pidx].size = *(unsigned*)(tmp + 4); +- axis_partitions[pidx].offset = crisv32_nand_cramfs_offset; +- kfree(data); +- } else { +- axis_partitions[pidx].size = romfs_length; +- axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; +- } ++ struct mtd_partition *partition = &axis_partitions[0]; ++ if (main_mtd && !ptable_ok) { ++ memcpy(axis_partitions, axis_default_partitions, ++ sizeof(axis_default_partitions)); ++ pidx = NUM_DEFAULT_PARTITIONS; ++ ram_rootfs_partition = DEFAULT_ROOTFS_PARTITION_NO; ++ } + ++ /* Add artificial partitions for rootfs if necessary */ ++ if (romfs_in_flash) { ++ /* rootfs is in directly accessible flash memory = NOR flash. ++ Add an overlapping device for the rootfs partition. */ ++ printk(KERN_INFO "axisflashmap: Adding partition for " ++ "overlapping root file system image\n"); ++ axis_partitions[pidx].size = romfs_length; ++ axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR; ++ axis_partitions[pidx].name = "romfs"; + axis_partitions[pidx].mask_flags |= MTD_WRITEABLE; +- +- printk(KERN_INFO +- " Adding readonly flash partition for romfs image:\n"); +- printk(pmsg, pidx, axis_partitions[pidx].offset, +- axis_partitions[pidx].size); ++ ram_rootfs_partition = -1; + pidx++; + } +- +- if (mymtd) { +- if (use_default_ptable) { +- printk(KERN_INFO " Using default partition table.\n"); +- err = add_mtd_partitions(mymtd, axis_default_partitions, +- NUM_DEFAULT_PARTITIONS); +- } else { +- err = add_mtd_partitions(mymtd, axis_partitions, pidx); ++ else if (romfs_length && !nand_boot) { ++ /* romfs exists in memory, but not in flash, so must be in RAM. ++ * Configure an MTDRAM partition. */ ++ if (ram_rootfs_partition < 0) { /* none set yet */ ++ ram_rootfs_partition = pidx; /* put it at the end */ ++ pidx++; + } ++ printk(KERN_INFO "axisflashmap: Adding partition for " ++ "root file system image in RAM\n"); ++ axis_partitions[ram_rootfs_partition].size = romfs_length; ++ axis_partitions[ram_rootfs_partition].offset = romfs_start; ++ axis_partitions[ram_rootfs_partition].name = "romfs"; ++ axis_partitions[ram_rootfs_partition].mask_flags |= ++ MTD_WRITEABLE; ++ } + +- if (err) { +- panic("axisflashmap could not add MTD partitions!\n"); +- } ++#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE ++ if (main_mtd) { ++ main_partition.size = main_mtd->size; ++ err = add_mtd_partitions(main_mtd, &main_partition, 1); ++ if (err) ++ panic("axisflashmap: Could not initialize " ++ "partition for whole main mtd device!\n"); + } +-/* CONFIG_EXTRAXFS_SIM */ + #endif + +- if (!romfs_in_flash) { +- /* Create an RAM device for the root partition (romfs). */ ++ /* Now, register all partitions with mtd. ++ * We do this one at a time so we can slip in an MTDRAM device ++ * in the proper place if required. */ ++ ++ for (part = 0; part < pidx; part++) { ++ if (part == ram_rootfs_partition) { ++ /* add MTDRAM partition here */ ++ struct mtd_info *mtd_ram; ++ ++ mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL); ++ if (!mtd_ram) ++ panic("axisflashmap: Couldn't allocate memory " ++ "for mtd_info!\n"); ++ printk(KERN_INFO "axisflashmap: Adding RAM partition " ++ "for rootfs image.\n"); ++ err = mtdram_init_device(mtd_ram, ++ (void *)partition[part].offset, ++ partition[part].size, ++ partition[part].name); ++ if (err) ++ panic("axisflashmap: Could not initialize " ++ "MTD RAM device!\n"); ++ /* JFFS2 likes to have an erasesize. Keep potential ++ * JFFS2 rootfs happy by providing one. Since image ++ * was most likely created for main mtd, use that ++ * erasesize, if available. Otherwise, make a guess. */ ++ mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : ++ CONFIG_ETRAX_PTABLE_SECTOR); ++ } else { ++ err = add_mtd_partitions(main_mtd, ++ &partition[part], 1); ++ if (err) ++ panic("axisflashmap: Could not add mtd " ++ "partition %d\n", part); ++ } ++ } + +-#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0) +- /* No use trying to boot this kernel from RAM. Panic! */ +- printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM " +- "device due to kernel (mis)configuration!\n"); +- panic("This kernel cannot boot from RAM!\n"); +-#else +- struct mtd_info *mtd_ram; ++#endif /* CONFIG_EXTRAXFS_SIM */ + +- mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info), +- GFP_KERNEL); +- if (!mtd_ram) { +- panic("axisflashmap couldn't allocate memory for " +- "mtd_info!\n"); +- } ++#ifdef CONFIG_ETRAXFS_SIM ++ /* For simulator, always use a RAM partition. ++ * The rootfs will be found after the kernel in RAM, ++ * with romfs_start and romfs_end indicating location and size. ++ */ ++ struct mtd_info *mtd_ram; ++ ++ mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info), ++ GFP_KERNEL); ++ if (!mtd_ram) { ++ panic("axisflashmap: Couldn't allocate memory for " ++ "mtd_info!\n"); ++ } + +- printk(KERN_INFO " Adding RAM partition for romfs image:\n"); +- printk(pmsg, pidx, romfs_start, romfs_length); ++ printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, " ++ "at %u, size %u\n", ++ (unsigned) romfs_start, (unsigned) romfs_length); ++ ++ err = mtdram_init_device(mtd_ram, (void*)romfs_start, ++ romfs_length, "romfs"); ++ if (err) { ++ panic("axisflashmap: Could not initialize MTD RAM " ++ "device!\n"); ++ } ++#endif /* CONFIG_EXTRAXFS_SIM */ ++ ++#ifndef CONFIG_ETRAXFS_SIM ++ if (aux_mtd) { ++ aux_partition.size = aux_mtd->size; ++ err = add_mtd_partitions(aux_mtd, &aux_partition, 1); ++ if (err) ++ panic("axisflashmap: Could not initialize " ++ "aux mtd device!\n"); + +- err = mtdram_init_device(mtd_ram, (void*)romfs_start, +- romfs_length, "romfs"); +- if (err) { +- panic("axisflashmap could not initialize MTD RAM " +- "device!\n"); +- } +-#endif + } ++#endif /* CONFIG_EXTRAXFS_SIM */ + + return err; + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/board_mmcspi.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/board_mmcspi.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/board_mmcspi.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/board_mmcspi.c 2007-01-29 15:51:19.000000000 +0100 +@@ -0,0 +1,686 @@ ++/* ++ * Somewhat generic "board-side" code to support SPI drivers for chips ++ * with a CRIS v32 and later. Not really board-specific, and only for ++ * registration of SPI devices for MMC, hence the "mmcspi" part of the ++ * name instead of a proper board name. ++ * ++ * Copyright (c) 2007 Axis Communications AB ++ * ++ * TODO: SDIO interrupt-pin support (though can't be done until ++ * there's support added in both the mmc_spi and the mmc frameworks). ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include <linux/types.h> ++#include <linux/platform_device.h> ++#include <linux/spi/spi.h> ++#include <linux/spi/mmc_spi.h> ++#include <linux/mmc/host.h> ++#include <asm/arch/board.h> ++#include <asm/arch/pinmux.h> ++#include <asm/arch/dma.h> ++#include <linux/err.h> ++ ++#include <asm/io.h> ++ ++/* We need some housekeeping. */ ++#define CONCAT_(a, b) a ## b ++#define CONCAT(a, b) CONCAT_(a, b) ++#define CONCAT3(a, b, c) CONCAT(CONCAT(a, b), c) ++ ++/* Grr. Why not define them as usual in autoconf, #ifdef REVEAL_MODULES? */ ++#if !defined(CONFIG_SPI_ETRAX_SSER) && defined(CONFIG_SPI_ETRAX_SSER_MODULE) ++#define CONFIG_SPI_ETRAX_SSER ++#endif ++ ++#if !defined(CONFIG_ETRAX_SPI_SSER0) && defined(CONFIG_ETRAX_SPI_SSER0_MODULE) ++#define CONFIG_ETRAX_SPI_SSER0 ++#endif ++ ++#if !defined(CONFIG_ETRAX_SPI_SSER1) && defined(CONFIG_ETRAX_SPI_SSER1_MODULE) ++#define CONFIG_ETRAX_SPI_SSER1 ++#endif ++ ++#if !defined(CONFIG_SPI_ETRAX_GPIO) && defined(CONFIG_SPI_ETRAX_GPIO_MODULE) ++#define CONFIG_SPI_ETRAX_GPIO ++#endif ++ ++#define CONFIGURED_PIN(x) ((x) != NULL && *(x) != 0 && *(x) != ' ') ++ ++/* Helper function to configure an iopin for input. */ ++ ++static int crisv32_config_pin_in(struct crisv32_iopin *pin, const char *name) ++{ ++ int ret = crisv32_io_get_name(pin, name); ++ if (ret) ++ return ret; ++ ++ crisv32_io_set_dir(pin, crisv32_io_dir_in); ++ return 0; ++} ++ ++/* ++ * Writable data pointed to by the constant parts of each MMC_SPI bus ++ * interface. Should only hold MMC-specific state (for the ++ * MMC-specific pins), nothing SPI-generic. ++ */ ++ ++struct crisv32_mmc_spi_pinstate { ++ struct crisv32_iopin write_protect_pin; ++ struct crisv32_iopin card_detect_pin; ++ ++ /* We must poll for card-detect, which we do each: */ ++#define CARD_DETECT_CHECK_INTERVAL (2*HZ) ++ /* We poll using a self-arming workqueue function. */ ++ struct work_struct cd_work; ++ ++ /* When we detect a change in card presence, we call this ++ * function, supplied by the mmc_spi framework: */ ++ irqreturn_t (*detectfunc)(int, void *); ++ ++ /* ++ * We call that function with this parameter as the second ++ * one. We must assume the other parameters are unused, as we ++ * don't have an interrupt context. ++ */ ++ void *detectfunc_param2; ++ ++ /* State for the card-detect worker. */ ++ int card_present; ++}; ++ ++/* Rearming "work" function for card-detect polling. */ ++ ++static void crisv32_cd_worker(void *x) ++{ ++ struct crisv32_mmc_spi_pinstate *state = x; ++ ++ /* It's a pull-up, so a card is present when 0. */ ++ int card_present = crisv32_io_rd(&state->card_detect_pin) == 0; ++ ++ if (card_present != state->card_present) { ++ state->card_present = card_present; ++ state->detectfunc(0, state->detectfunc_param2); ++ } ++ schedule_delayed_work(&state->cd_work, CARD_DETECT_CHECK_INTERVAL); ++} ++ ++/* The parts of MMC-specific configuration common to GPIO and SSER. */ ++ ++static int crisv32_mmcspi_config_common(struct spi_device *spidev, ++ irqreturn_t (*intfunc)(int, void *), ++ struct mmc_host *mmc_host, ++ const struct crisv32_mmc_spi_pindata *pd) ++{ ++ int ret = 0; ++ struct crisv32_mmc_spi_pinstate *ps = pd->pinstate; ++ ++ /* ++ * If we don't have a card-detect pin, the card must be ++ * present at startup (including insmod/modprobe). No ++ * re-scans are done if no card is present at that time. ++ */ ++ if (CONFIGURED_PIN(pd->card_detect)) { ++ ret = crisv32_config_pin_in(&ps->card_detect_pin, ++ pd->card_detect); ++ ++ if (ret != 0) ++ goto bad_card_detect; ++ ++ /* Need to cast away const from pd, unfortunately. */ ++ INIT_WORK(&ps->cd_work, crisv32_cd_worker, (void *) ps); ++ ps->card_present = 1; ++ ps->detectfunc = intfunc; ++ ps->detectfunc_param2 = mmc_host; ++ crisv32_cd_worker(ps); ++ } else ++ ps->detectfunc = NULL; ++ ++ /* ++ * We set up for checking for presence of a write-protect pin ++ * as pin.port being non-NULL. ++ */ ++ memset(&ps->write_protect_pin, 0, sizeof ps->write_protect_pin); ++ if (CONFIGURED_PIN(pd->write_protect)) { ++ ret = crisv32_config_pin_in(&ps->write_protect_pin, ++ pd->write_protect); ++ ++ if (ret != 0) ++ goto bad_write_protect; ++ } ++ ++ return 0; ++ ++ bad_write_protect: ++ if (ps->detectfunc) { ++ cancel_rearming_delayed_work(&ps->cd_work); ++ ps->detectfunc = NULL; ++ } ++ ++ bad_card_detect: ++ return ret; ++} ++ ++/* A function to undo crisv32_mmcspi_config_common. */ ++ ++static void crisv32_mmcspi_deconfig_common(const struct ++ crisv32_mmc_spi_pindata *pd) ++{ ++ if (pd->pinstate->detectfunc) { ++ cancel_rearming_delayed_work(&pd->pinstate->cd_work); ++ pd->pinstate->detectfunc = NULL; ++ } ++ ++ /* We don't have to undo the pin allocations, being GPIO. */ ++} ++ ++/* Helper function for write-protect sense. */ ++ ++static int crisv32_mmcspi_get_ro_helper(struct crisv32_mmc_spi_pinstate *ps) ++{ ++ return ps->write_protect_pin.port != NULL ++ && crisv32_io_rd(&ps->write_protect_pin) != 0; ++} ++ ++/* The hardware-interface-specific SPI+MMC parts. */ ++ ++#ifdef CONFIG_SPI_ETRAX_SSER ++static const char crisv32_matching_spi_sser_driver_name[] __init_or_module ++ = "spi_crisv32_sser"; ++ ++/* ++ * Make up something we can use in tables and function without ++ * #ifdef-cluttering. ++ */ ++#ifdef CONFIG_ETRAX_SPI_SSER0_DMA ++#define WITH_ETRAX_SPI_SSER0_DMA 1 ++#else ++#define WITH_ETRAX_SPI_SSER0_DMA 0 ++#endif ++#ifdef CONFIG_ETRAX_SPI_SSER1_DMA ++#define WITH_ETRAX_SPI_SSER1_DMA 1 ++#else ++#define WITH_ETRAX_SPI_SSER1_DMA 0 ++#endif ++ ++/* Write-protect sense for the SSER interface. */ ++ ++static int crisv32_mmcspi_sser_get_ro(struct device *dev) ++{ ++ struct spi_device *spidev = to_spi_device(dev); ++ struct crisv32_mmc_spi_sser_hwdata *sser_defs ++ = spidev->controller_data; ++ struct crisv32_mmc_spi_pindata *pd = &sser_defs->mmc; ++ return crisv32_mmcspi_get_ro_helper(pd->pinstate); ++} ++ ++/* Initialize the MMC-specific parts of the MMC+SPI interface, SSER. */ ++ ++static int crisv32_mmcspi_sser_init(struct device *dev, ++ irqreturn_t (*intfunc)(int, void *), ++ void *xmmc_host) ++{ ++ struct mmc_host *mmc_host = xmmc_host; ++ struct spi_device *spidev = to_spi_device(dev); ++ struct crisv32_mmc_spi_sser_hwdata *sser_defs ++ = spidev->controller_data; ++ int ret = crisv32_mmcspi_config_common(spidev, intfunc, mmc_host, ++ &sser_defs->mmc); ++ if (ret != 0) ++ return ret; ++ ++ mmc_host->f_max = spidev->max_speed_hz; ++ ++ /* ++ * Let's just set this to ceil(100e6/65536). It wouldn't be ++ * hard to change the base frequency to support down to 450Hz, ++ * but there's no apparent requirement from known hardware. ++ * Would also require adjustments to the SPI code, not just ++ * here. ++ * ++ * On second thought, let's not set f_min unconditionally, as ++ * mmc doesn't treat it as a limit, but as the frequency to ++ * use at initialization. We stick with what mmc_spi sets, if ++ * it fits. ++ */ ++ if (mmc_host->f_min < 1526) ++ mmc_host->f_min = 1526; ++ ++ dev_info(dev, "CRIS v32 mmc_spi support hooked to SPI on sser%d" ++ " (cd: %s, wp: %s)\n", ++ spidev->master->bus_num, ++ CONFIGURED_PIN(sser_defs->mmc.card_detect) ++ ? sser_defs->mmc.card_detect : "(none)", ++ CONFIGURED_PIN(sser_defs->mmc.write_protect) ++ ? sser_defs->mmc.write_protect : "(none)"); ++ return 0; ++} ++ ++/* Similarly, to undo crisv32_mmcspi_sser_init. */ ++ ++static void crisv32_mmcspi_sser_exit(struct device *dev, void *xmmc_host) ++{ ++ struct spi_device *spidev = to_spi_device(dev); ++ struct crisv32_mmc_spi_sser_hwdata *sser_defs ++ = spidev->controller_data; ++ ++ crisv32_mmcspi_deconfig_common(&sser_defs->mmc); ++} ++ ++/* ++ * Connect sser and DMA channels and return the proper numbers to use. ++ * ++ * This function exists really only to avoid having the following constants ++ * tabled: regi_sserN, SSERn_INTR_VECT, pinmux_sserN, SYNC_SERn_TX_DMA_NBR, ++ * SYNC_SERn_RX_DMA_NBR dma_sserN, regi_dmaM, regi_dmaN, DMAm_INTR_VECT, ++ * DMAn_INTR_VECT. I might have missed some. :-) ++ */ ++static int crisv32_allocate_sser(struct crisv32_regi_n_int *sserp, ++ struct crisv32_regi_n_int *dmainp, ++ struct crisv32_regi_n_int *dmaoutp, ++ u32 sserno) ++{ ++ int ret; ++ u32 regi_sser = sserno == 0 ? regi_sser0 : regi_sser1; ++ u32 sser_irq = sserno == 0 ? SSER0_INTR_VECT : SSER1_INTR_VECT; ++ BUG_ON(sserno > 1 || sserp == NULL); ++ ++ ret = crisv32_pinmux_alloc_fixed(sserno == 0 ++ ? pinmux_sser0 : pinmux_sser1); ++ if (ret != 0) ++ return ret; ++ ++ sserp->regi = regi_sser; ++ sserp->irq = sser_irq; ++ ++ if (dmaoutp) { ++ crisv32_request_dma(sserno == 0 ++ ? SYNC_SER0_TX_DMA_NBR ++ : SYNC_SER1_TX_DMA_NBR, ++ "SD/MMC SPI dma tr", ++ DMA_VERBOSE_ON_ERROR | DMA_PANIC_ON_ERROR, ++ /* Let's be brave and ask for the ++ max. Except it's simplex, so ++ let's request half the max ++ speed in either direction. */ ++ 50 * 1000 * 1000 / 8 / 2, ++ sserno == 0 ? dma_sser0 : dma_sser1); ++ dmaoutp->regi = sserno == 0 ++ ? CONCAT(regi_dma, SYNC_SER0_TX_DMA_NBR) ++ : CONCAT(regi_dma, SYNC_SER1_TX_DMA_NBR); ++ dmaoutp->irq = sserno == 0 ++ ? CONCAT3(DMA, SYNC_SER0_TX_DMA_NBR, _INTR_VECT) ++ : CONCAT3(DMA, SYNC_SER1_TX_DMA_NBR, _INTR_VECT); ++ } ++ ++ if (dmainp) { ++ crisv32_request_dma(sserno == 0 ++ ? SYNC_SER0_RX_DMA_NBR ++ : SYNC_SER1_RX_DMA_NBR, ++ "SD/MMC SPI dma rec", ++ DMA_VERBOSE_ON_ERROR | DMA_PANIC_ON_ERROR, ++ 50 * 1000 * 1000 / 8 / 2, ++ sserno == 0 ? dma_sser0 : dma_sser1); ++ dmainp->regi = sserno == 0 ++ ? CONCAT(regi_dma, SYNC_SER0_RX_DMA_NBR) ++ : CONCAT(regi_dma, SYNC_SER1_RX_DMA_NBR); ++ dmainp->irq = sserno == 0 ++ ? CONCAT3(DMA, SYNC_SER0_RX_DMA_NBR, _INTR_VECT) ++ : CONCAT3(DMA, SYNC_SER1_RX_DMA_NBR, _INTR_VECT); ++ } ++ ++ return 0; ++} ++ ++/* Undo whatever allocations et. al. that crisv32_allocate_sser did. */ ++ ++static void crisv32_free_sser(u32 sserno, int with_dma) ++{ ++ int ret; ++ ++ if (with_dma) { ++ crisv32_free_dma(sserno == 0 ++ ? SYNC_SER0_RX_DMA_NBR ++ : SYNC_SER1_RX_DMA_NBR); ++ crisv32_free_dma(sserno == 0 ++ ? SYNC_SER0_TX_DMA_NBR ++ : SYNC_SER1_TX_DMA_NBR); ++ } ++ ++ ret = crisv32_pinmux_dealloc_fixed(sserno == 0 ++ ? pinmux_sser0 : pinmux_sser1); ++ ++ if (ret != 0) ++ panic("%s: crisv32_pinmux_dealloc_fixed returned %d\n", ++ __FUNCTION__, ret); ++} ++ ++/* Convenience-macro to avoid typos causing diffs between sser ports. */ ++ ++#define SSER_CDATA(n) \ ++ { \ ++ { \ ++ .using_dma = WITH_ETRAX_SPI_SSER##n##_DMA, \ ++ .iface_allocate = crisv32_allocate_sser##n, \ ++ .iface_free = crisv32_free_sser##n \ ++ }, \ ++ { \ ++ .card_detect \ ++ = CONFIG_ETRAX_SPI_MMC_CD_SSER##n##_PIN,\ ++ .write_protect \ ++ = CONFIG_ETRAX_SPI_MMC_WP_SSER##n##_PIN,\ ++ .pinstate \ ++ = &crisv32_mmcspi_sser##n##_pinstate \ ++ } \ ++ } ++ ++#ifdef CONFIG_ETRAX_SPI_SSER0 ++ ++/* Allocate hardware to go with sser0 and fill in the right numbers. */ ++ ++static int crisv32_allocate_sser0(struct crisv32_regi_n_int *sserp, ++ struct crisv32_regi_n_int *dmainp, ++ struct crisv32_regi_n_int *dmaoutp) ++{ ++ return crisv32_allocate_sser(sserp, dmainp, dmaoutp, 0); ++} ++ ++/* Undo those allocations. */ ++ ++static void crisv32_free_sser0(void) ++{ ++ crisv32_free_sser(0, WITH_ETRAX_SPI_SSER0_DMA); ++} ++ ++static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_sser0_pinstate; ++static const struct crisv32_mmc_spi_sser_hwdata crisv32_mmcspi_sser0_cdata ++ = SSER_CDATA(0); ++#endif /* CONFIG_ETRAX_SPI_SSER0 */ ++ ++#ifdef CONFIG_ETRAX_SPI_SSER1 ++ ++/* Allocate hardware to go with sser0 and fill in the right numbers. */ ++ ++static int crisv32_allocate_sser1(struct crisv32_regi_n_int *sserp, ++ struct crisv32_regi_n_int *dmainp, ++ struct crisv32_regi_n_int *dmaoutp) ++{ ++ return crisv32_allocate_sser(sserp, dmainp, dmaoutp, 1); ++} ++ ++/* Undo those allocations. */ ++ ++static void crisv32_free_sser1(void) ++{ ++ crisv32_free_sser(1, WITH_ETRAX_SPI_SSER1_DMA); ++} ++ ++static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_sser1_pinstate; ++static const struct crisv32_mmc_spi_sser_hwdata crisv32_mmcspi_sser1_cdata ++ = SSER_CDATA(1); ++ ++#endif /* CONFIG_ETRAX_SPI_SSER1 */ ++ ++static struct mmc_spi_platform_data crisv32_mmcspi_sser_pdata = { ++ .init = crisv32_mmcspi_sser_init, ++ .exit = __devexit_p(crisv32_mmcspi_sser_exit), ++ .detect_delay = 0, ++ .get_ro = crisv32_mmcspi_sser_get_ro, ++ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, ++ .setpower = NULL ++}; ++ ++#endif /* CONFIG_SPI_ETRAX_SSER */ ++ ++#ifdef CONFIG_SPI_ETRAX_GPIO ++ ++static const char crisv32_matching_spi_gpio_driver_name[] __init_or_module ++ = "spi_crisv32_gpio"; ++ ++/* Write-protect sense for the GPIO interface. */ ++ ++static int crisv32_mmcspi_gpio_get_ro(struct device *dev) ++{ ++ struct spi_device *spidev = to_spi_device(dev); ++ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs ++ = spidev->controller_data; ++ struct crisv32_mmc_spi_pindata *pd = &gpio_defs->mmc; ++ ++ return crisv32_mmcspi_get_ro_helper(pd->pinstate); ++} ++ ++/* Initialize the MMC-specific parts of the MMC+SPI interface, GPIO. */ ++ ++static int crisv32_mmcspi_gpio_init(struct device *dev, ++ irqreturn_t (*intfunc)(int, void *), ++ void *xmmc_host) ++{ ++ struct mmc_host *mmc_host = xmmc_host; ++ struct spi_device *spidev = to_spi_device(dev); ++ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs ++ = spidev->controller_data; ++ int ret = crisv32_mmcspi_config_common(spidev, intfunc, mmc_host, ++ &gpio_defs->mmc); ++ if (ret) ++ return ret; ++ ++ mmc_host->f_max = spidev->max_speed_hz; ++ ++ /* ++ * We don't set f_min, as the mmc code doesn't treat it as a ++ * limit, but as the frequency to use at initialization. We ++ * stick with what mmc_spi sets. ++ */ ++ dev_info(dev, "CRIS v32 mmc_spi support hooked to SPI on GPIO" ++ " (bus #%d, cd: %s, wp: %s)\n", ++ spidev->master->bus_num, ++ CONFIGURED_PIN(gpio_defs->mmc.card_detect) ++ ? gpio_defs->mmc.card_detect : "(none)", ++ CONFIGURED_PIN(gpio_defs->mmc.write_protect) ++ ? gpio_defs->mmc.write_protect : "(none)"); ++ return 0; ++} ++ ++/* Similarly, to undo crisv32_mmcspi_gpio_init. */ ++ ++static void crisv32_mmcspi_gpio_exit(struct device *dev, void *xmmc_host) ++{ ++ struct spi_device *spidev = to_spi_device(dev); ++ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs ++ = spidev->controller_data; ++ ++ crisv32_mmcspi_deconfig_common(&gpio_defs->mmc); ++} ++ ++static const struct mmc_spi_platform_data crisv32_mmcspi_gpio_pdata = { ++ .init = crisv32_mmcspi_gpio_init, ++ .exit = __devexit_p(crisv32_mmcspi_gpio_exit), ++ .detect_delay = 0, ++ .get_ro = crisv32_mmcspi_gpio_get_ro, ++ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, ++ .setpower = NULL ++}; ++ ++static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_gpio_pinstate; ++static const struct crisv32_mmc_spi_gpio_hwdata crisv32_mmcspi_gpio_cdata = { ++ { ++ .cs = CONFIG_ETRAX_SPI_CS_PIN, ++ .miso = CONFIG_ETRAX_SPI_DATAIN_PIN, ++ .mosi = CONFIG_ETRAX_SPI_DATAOUT_PIN, ++ .sclk = CONFIG_ETRAX_SPI_CLK_PIN ++ }, ++ { ++ .card_detect = CONFIG_ETRAX_SPI_MMC_CD_GPIO_PIN, ++ .write_protect = CONFIG_ETRAX_SPI_MMC_WP_GPIO_PIN, ++ .pinstate = &crisv32_mmcspi_gpio_pinstate ++ } ++}; ++#endif /* CONFIG_SPI_ETRAX_GPIO */ ++ ++struct crisv32_s_b_i_and_driver_info { ++ struct spi_board_info sbi; ++ const char *driver_name; ++ ++ /* ++ * We have to adjust the platform device at time of creation ++ * below, to allow the Linux DMA framework to handle DMA. In ++ * the name of simplicity, we state the dma:able property ++ * twice, a bit redundantly; here and in the controller_data ++ * structure pointed to by spi_board_info. ++ */ ++ int dma_able; ++}; ++ ++/* Convenience-macro to avoid typos causing diffs between sser ports. */ ++ ++#define SSER_CONFIG(n) \ ++ { \ ++ /* \ ++ * No meaningful values for .irq or .chip_select, \ ++ * so we leave them out. \ ++ */ \ ++ { \ ++ .modalias = "mmc_spi", \ ++ .platform_data \ ++ = &crisv32_mmcspi_sser_pdata, \ ++ /* \ ++ * Casting to avoid a compiler const-warning. \ ++ */ \ ++ .controller_data \ ++ = ((void *) \ ++ &crisv32_mmcspi_sser##n##_cdata), \ ++ .max_speed_hz = 50 * 1000 * 1000, \ ++ .bus_num = n, \ ++ /* \ ++ * We only provide one mode, so it must be \ ++ * default. \ ++ */ \ ++ .mode = SPI_MODE_3 \ ++ }, \ ++ crisv32_matching_spi_sser_driver_name, \ ++ WITH_ETRAX_SPI_SSER##n##_DMA \ ++ } ++ ++static const struct crisv32_s_b_i_and_driver_info ++crisv32_mmcspi_devices[] __initdata = { ++#ifdef CONFIG_ETRAX_SPI_SSER0 ++ SSER_CONFIG(0), ++#endif ++#ifdef CONFIG_ETRAX_SPI_SSER1 ++ SSER_CONFIG(1), ++#endif ++#ifdef CONFIG_SPI_ETRAX_GPIO ++ { ++ { ++ .modalias = "mmc_spi", ++ .platform_data = &crisv32_mmcspi_gpio_pdata, ++ /* Casting to avoid a compiler const-warning. */ ++ .controller_data ++ = (void *) &crisv32_mmcspi_gpio_cdata, ++ ++ /* No, we can't even reach this number with GPIO. */ ++ .max_speed_hz = 5 * 1000 * 1000, ++ .bus_num = 2 ++ }, ++ crisv32_matching_spi_gpio_driver_name, ++ 0 ++ }, ++#endif ++}; ++ ++/* Must not be __initdata. */ ++static const char controller_data_ptr_name[] = "controller_data_ptr"; ++static u64 allmem_mask = ~(u32) 0; ++ ++/* ++ * We have to register the SSER and GPIO "platform_device"s separately ++ * from the "spi_board_info"s in order to have the drivers separated ++ * from the hardware instance info. ++ */ ++ ++static int __init crisv32_register_mmcspi(void) ++{ ++ int ret; ++ void *retp; ++ const struct crisv32_s_b_i_and_driver_info *sbip; ++ ++ for (sbip = crisv32_mmcspi_devices; ++ sbip < crisv32_mmcspi_devices ++ + ARRAY_SIZE(crisv32_mmcspi_devices); ++ sbip++) { ++ ++ /* ++ * We have to pass the controller data as a device ++ * "resource" (FIXME: too?), so it can be available ++ * for the setup *before* starting the SPI core - ++ * which is where .controller_data makes it to the SPI ++ * structure! ++ */ ++ struct resource mmcspi_res = { ++ .start = (resource_size_t) sbip->sbi.controller_data, ++ .end = (resource_size_t) sbip->sbi.controller_data, ++ .name = controller_data_ptr_name ++ }; ++ ++ /* ++ * Presumably we could pass the irqs and register ++ * addresses and... as individual resources here ++ * instead of privately in spi_board_info ++ * .controller_data, and make that part a bit more ++ * readable. Maybe not worthwhile. ++ */ ++ /* Need to cast away const here. FIXME: fix the pdrs API. */ ++ retp = platform_device_alloc(sbip->driver_name, ++ sbip->sbi.bus_num); ++ if (IS_ERR_VALUE(PTR_ERR(retp))) ++ return PTR_ERR(retp); ++ ++ /* ++ * We can't use platform_device_register_simple as we ++ * want to set stuff in the device to mark that we'd ++ * prefer buffers explicitly passed as DMA-able. ++ * Disabling/omitting the "if" below, cause testing of ++ * the non-DMA-mem execution path of a DMA-capable ++ * driver. ++ */ ++ if (sbip->dma_able) { ++ struct platform_device *pdev = retp; ++ ++ pdev->dev.dma_mask = &allmem_mask; ++ pdev->dev.coherent_dma_mask = allmem_mask; ++ } ++ ++ if ((ret = platform_device_add_resources(retp, &mmcspi_res, 1)) != 0 ++ || (ret = platform_device_add(retp)) != 0) { ++ platform_device_put(retp); ++ return ret; ++ } ++ ++ /* ++ * The cost of keeping all info rooted at ++ * crisv32_mmcspi_devices is the allocation overhead ++ * for allocating separately each board info (in the ++ * unlikely event that there's more than one). ++ */ ++ ret = spi_register_board_info(&sbip->sbi, 1); ++ if (ret != 0) ++ return ret; ++ } ++ ++ return 0; ++} ++#ifdef MODULE ++#error "Non-module because spi_register_board_info is one-way; there's no unregister function" ++#endif ++ ++/* ++ * Needs to be called before __initcall/module_init because the SPI ++ * bus scanning happens when the actual driver registers with the SPI ++ * machinery (spi_bitbang_start/spi_register_master), not when the ++ * device registers (spi_register_board_info). ++ */ ++subsys_initcall(crisv32_register_mmcspi); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/cryptocop.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/cryptocop.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/cryptocop.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/cryptocop.c 2007-01-09 10:29:20.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: cryptocop.c,v 1.13 2005/04/21 17:27:55 henriken Exp $ ++/* $Id: cryptocop.c,v 1.22 2007/01/09 09:29:20 starvik Exp $ + * + * Stream co-processor driver for the ETRAX FS + * +@@ -1718,7 +1718,7 @@ + * i = i + 1 + * } + * i = Nk +- * ++ * + * while (i < (Nb * (Nr + 1))) { + * temp = w[i - 1] + * if ((i mod Nk) == 0) { +@@ -1886,7 +1886,7 @@ + } + + static irqreturn_t +-dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++dma_done_interrupt(int irq, void *dev_id) + { + struct cryptocop_prio_job *done_job; + reg_dma_rw_ack_intr ack_intr = { +@@ -2226,6 +2226,7 @@ + &pj->iop->ctx_out, (char*)virt_to_phys(&pj->iop->ctx_out))); + + /* Start input DMA. */ ++ flush_dma_context(&pj->iop->ctx_in); + DMA_START_CONTEXT(regi_dma9, virt_to_phys(&pj->iop->ctx_in)); + + /* Start output DMA. */ +@@ -3459,7 +3460,7 @@ + int err; + int i; + static int initialized = 0; +- ++ + if (initialized) + return 0; + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/gpio.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/gpio.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/gpio.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/gpio.c 2007-01-09 10:29:20.000000000 +0100 +@@ -1,68 +1,15 @@ +-/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $ +- * ++/* + * ETRAX CRISv32 general port I/O device + * +- * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB ++ * Copyright (c) 1999-2006 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Ola Knutsson (LED handling) + * Johan Adolfsson (read/set directions, write, port G, + * port to ETRAX FS. + * +- * $Log: gpio.c,v $ +- * Revision 1.16 2005/06/19 17:06:49 starvik +- * Merge of Linux 2.6.12. +- * +- * Revision 1.15 2005/05/25 08:22:20 starvik +- * Changed GPIO port order to fit packages/devices/axis-2.4. +- * +- * Revision 1.14 2005/04/24 18:35:08 starvik +- * Updated with final register headers. +- * +- * Revision 1.13 2005/03/15 15:43:00 starvik +- * dev_id needs to be supplied for shared IRQs. +- * +- * Revision 1.12 2005/03/10 17:12:00 starvik +- * Protect alarm list with spinlock. +- * +- * Revision 1.11 2005/01/05 06:08:59 starvik +- * No need to do local_irq_disable after local_irq_save. +- * +- * Revision 1.10 2004/11/19 08:38:31 starvik +- * Removed old crap. +- * +- * Revision 1.9 2004/05/14 07:58:02 starvik +- * Merge of changes from 2.4 +- * +- * Revision 1.8 2003/09/11 07:29:50 starvik +- * Merge of Linux 2.6.0-test5 +- * +- * Revision 1.7 2003/07/10 13:25:46 starvik +- * Compiles for 2.5.74 +- * Lindented ethernet.c +- * +- * Revision 1.6 2003/07/04 08:27:46 starvik +- * Merge of Linux 2.5.74 +- * +- * Revision 1.5 2003/06/10 08:26:37 johana +- * Etrax -> ETRAX CRISv32 +- * +- * Revision 1.4 2003/06/05 14:22:48 johana +- * Initialise some_alarms. +- * +- * Revision 1.3 2003/06/05 10:15:46 johana +- * New INTR_VECT macros. +- * Enable interrupts in global config. +- * +- * Revision 1.2 2003/06/03 15:52:50 johana +- * Initial CRIS v32 version. +- * +- * Revision 1.1 2003/06/03 08:53:15 johana +- * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7. +- * + */ + +- + #include <linux/module.h> + #include <linux/sched.h> + #include <linux/slab.h> +@@ -85,6 +32,13 @@ + #include <asm/system.h> + #include <asm/irq.h> + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++#include "i2c.h" ++ ++#define VIRT_I2C_ADDR 0x40 ++#endif ++ ++ + /* The following gio ports on ETRAX FS is available: + * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge + * pb 18 bits +@@ -111,6 +65,10 @@ + static wait_queue_head_t *gpio_wq; + #endif + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++static int virtual_gpio_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg); ++#endif + static int gpio_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); + static ssize_t gpio_write(struct file * file, const char * buf, size_t count, +@@ -148,55 +106,75 @@ + #define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) + #define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg ) + unsigned long led_dummy; ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++static unsigned long virtual_dummy; ++static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE; ++static unsigned short cached_virtual_gpio_read = 0; ++#endif + +-static volatile unsigned long *data_out[NUM_PORTS] = { +- GIO_REG_WR_ADDR(rw_pa_dout), +- GIO_REG_WR_ADDR(rw_pb_dout), ++static volatile unsigned long *data_out[NUM_PORTS] = { ++ GIO_REG_WR_ADDR(rw_pa_dout), ++ GIO_REG_WR_ADDR(rw_pb_dout), + &led_dummy, +- GIO_REG_WR_ADDR(rw_pc_dout), +- GIO_REG_WR_ADDR(rw_pd_dout), ++ GIO_REG_WR_ADDR(rw_pc_dout), ++ GIO_REG_WR_ADDR(rw_pd_dout), + GIO_REG_WR_ADDR(rw_pe_dout), ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ &virtual_dummy, ++#endif + }; + +-static volatile unsigned long *data_in[NUM_PORTS] = { +- GIO_REG_RD_ADDR(r_pa_din), +- GIO_REG_RD_ADDR(r_pb_din), ++static volatile unsigned long *data_in[NUM_PORTS] = { ++ GIO_REG_RD_ADDR(r_pa_din), ++ GIO_REG_RD_ADDR(r_pb_din), + &led_dummy, +- GIO_REG_RD_ADDR(r_pc_din), +- GIO_REG_RD_ADDR(r_pd_din), ++ GIO_REG_RD_ADDR(r_pc_din), ++ GIO_REG_RD_ADDR(r_pd_din), + GIO_REG_RD_ADDR(r_pe_din), ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ &virtual_dummy, ++#endif + }; + +-static unsigned long changeable_dir[NUM_PORTS] = { ++static unsigned long changeable_dir[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_DIR, + CONFIG_ETRAX_PB_CHANGEABLE_DIR, + 0, + CONFIG_ETRAX_PC_CHANGEABLE_DIR, +- CONFIG_ETRAX_PD_CHANGEABLE_DIR, ++ CONFIG_ETRAX_PD_CHANGEABLE_DIR, + CONFIG_ETRAX_PE_CHANGEABLE_DIR, ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ CONFIG_ETRAX_PV_CHANGEABLE_DIR, ++#endif + }; + +-static unsigned long changeable_bits[NUM_PORTS] = { ++static unsigned long changeable_bits[NUM_PORTS] = { + CONFIG_ETRAX_PA_CHANGEABLE_BITS, + CONFIG_ETRAX_PB_CHANGEABLE_BITS, + 0, + CONFIG_ETRAX_PC_CHANGEABLE_BITS, + CONFIG_ETRAX_PD_CHANGEABLE_BITS, + CONFIG_ETRAX_PE_CHANGEABLE_BITS, ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ CONFIG_ETRAX_PV_CHANGEABLE_BITS, ++#endif + }; + +-static volatile unsigned long *dir_oe[NUM_PORTS] = { +- GIO_REG_WR_ADDR(rw_pa_oe), +- GIO_REG_WR_ADDR(rw_pb_oe), ++static volatile unsigned long *dir_oe[NUM_PORTS] = { ++ GIO_REG_WR_ADDR(rw_pa_oe), ++ GIO_REG_WR_ADDR(rw_pb_oe), + &led_dummy, +- GIO_REG_WR_ADDR(rw_pc_oe), +- GIO_REG_WR_ADDR(rw_pd_oe), ++ GIO_REG_WR_ADDR(rw_pc_oe), ++ GIO_REG_WR_ADDR(rw_pd_oe), + GIO_REG_WR_ADDR(rw_pe_oe), ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ &virtual_rw_pv_oe, ++#endif + }; + + + +-static unsigned int ++static unsigned int + gpio_poll(struct file *file, + poll_table *wait) + { +@@ -278,7 +256,7 @@ + return 0; + + if ((data & priv->highalarm) || +- (~data & priv->lowalarm)) { ++ (~data & priv->lowalarm)) { + mask = POLLIN|POLLRDNORM; + } + +@@ -288,11 +266,26 @@ + + int etrax_gpio_wake_up_check(void) + { +- struct gpio_private *priv = alarmlist; ++ struct gpio_private *priv; + unsigned long data = 0; ++ unsigned long flags; + int ret = 0; ++ spin_lock_irqsave(&alarm_lock, flags); ++ priv = alarmlist; + while (priv) { ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ if (priv->minor == GPIO_MINOR_V) { ++ data = (unsigned long)cached_virtual_gpio_read; ++ } ++ else { ++ data = *data_in[priv->minor]; ++ if (priv->minor == GPIO_MINOR_A) { ++ priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); ++ } ++ } ++#else + data = *data_in[priv->minor]; ++#endif + if ((data & priv->highalarm) || + (~data & priv->lowalarm)) { + DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor)); +@@ -301,11 +294,12 @@ + } + priv = priv->next; + } ++ spin_unlock_irqrestore(&alarm_lock, flags); + return ret; + } + +-static irqreturn_t +-gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++static irqreturn_t ++gpio_poll_timer_interrupt(int irq, void *dev_id) + { + if (gpio_some_alarms) { + return IRQ_RETVAL(etrax_gpio_wake_up_check()); +@@ -314,14 +308,17 @@ + } + + static irqreturn_t +-gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++gpio_pa_interrupt(int irq, void *dev_id) + { + reg_gio_rw_intr_mask intr_mask; + reg_gio_r_masked_intr masked_intr; + reg_gio_rw_ack_intr ack_intr; + unsigned long tmp; + unsigned long tmp2; +- ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ unsigned char enable_gpiov_ack = 0; ++#endif ++ + /* Find what PA interrupts are active */ + masked_intr = REG_RD(gio, regi_gio, r_masked_intr); + tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr); +@@ -331,6 +328,17 @@ + tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms); + spin_unlock(&alarm_lock); + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ /* Something changed on virtual GPIO. Interrupt is acked by ++ * reading the device. ++ */ ++ if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) { ++ i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read, ++ sizeof(cached_virtual_gpio_read)); ++ enable_gpiov_ack = 1; ++ } ++#endif ++ + /* Ack them */ + ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp); + REG_WR(gio, regi_gio, rw_ack_intr, ack_intr); +@@ -339,13 +347,21 @@ + intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); + tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask); + tmp2 &= ~tmp; ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ /* Do not disable interrupt on virtual GPIO. Changes on virtual ++ * pins are only noticed by an interrupt. ++ */ ++ if (enable_gpiov_ack) { ++ tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); ++ } ++#endif + intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2); + REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); + + if (gpio_some_alarms) { + return IRQ_RETVAL(etrax_gpio_wake_up_check()); + } +- return IRQ_NONE; ++ return IRQ_NONE; + } + + +@@ -358,8 +374,13 @@ + unsigned long shadow; + volatile unsigned long *port; + ssize_t retval = count; +- /* Only bits 0-7 may be used for write operations but allow all ++ /* Only bits 0-7 may be used for write operations but allow all + devices except leds... */ ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ if (priv->minor == GPIO_MINOR_V) { ++ return -EFAULT; ++ } ++#endif + if (priv->minor == GPIO_MINOR_LEDS) { + return -EFAULT; + } +@@ -416,25 +437,24 @@ + + static int + gpio_open(struct inode *inode, struct file *filp) +-{ ++{ + struct gpio_private *priv; + int p = iminor(inode); + + if (p > GPIO_MINOR_LAST) + return -EINVAL; + +- priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private), ++ priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private), + GFP_KERNEL); + + if (!priv) + return -ENOMEM; ++ memset(priv, 0, sizeof(*priv)); + + priv->minor = p; + +- /* initialize the io/alarm struct and link it into our alarmlist */ ++ /* initialize the io/alarm struct */ + +- priv->next = alarmlist; +- alarmlist = priv; + priv->clk_mask = 0; + priv->data_mask = 0; + priv->highalarm = 0; +@@ -443,20 +463,30 @@ + + filp->private_data = (void *)priv; + ++ /* link it into our alarmlist */ ++ spin_lock_irq(&alarm_lock); ++ priv->next = alarmlist; ++ alarmlist = priv; ++ spin_unlock_irq(&alarm_lock); ++ + return 0; + } + + static int + gpio_release(struct inode *inode, struct file *filp) + { +- struct gpio_private *p = alarmlist; +- struct gpio_private *todel = (struct gpio_private *)filp->private_data; ++ struct gpio_private *p; ++ struct gpio_private *todel; + /* local copies while updating them: */ + unsigned long a_high, a_low; + unsigned long some_alarms; + + /* unlink from alarmlist and free the private structure */ + ++ spin_lock_irq(&alarm_lock); ++ p = alarmlist; ++ todel = (struct gpio_private *)filp->private_data; ++ + if (p == todel) { + alarmlist = todel->next; + } else { +@@ -473,6 +503,9 @@ + a_low = 0; + while (p) { + if (p->minor == GPIO_MINOR_A) { ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); ++#endif + a_high |= p->highalarm; + a_low |= p->lowalarm; + } +@@ -483,23 +516,30 @@ + p = p->next; + } + +- spin_lock(&alarm_lock); ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ /* Variables 'some_alarms' and 'a_low' needs to be set here again ++ * to ensure that interrupt for virtual GPIO is handled. ++ */ ++ some_alarms = 1; ++ a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); ++#endif ++ + gpio_some_alarms = some_alarms; + gpio_pa_high_alarms = a_high; + gpio_pa_low_alarms = a_low; +- spin_unlock(&alarm_lock); ++ spin_unlock_irq(&alarm_lock); + + return 0; + } + +-/* Main device API. ioctl's to read/set/clear bits, as well as to ++/* Main device API. ioctl's to read/set/clear bits, as well as to + * set alarms to wait for using a subsequent select(). + */ + + unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg) + { +- /* Set direction 0=unchanged 1=input, +- * return mask with 1=input ++ /* Set direction 0=unchanged 1=input, ++ * return mask with 1=input + */ + unsigned long flags; + unsigned long dir_shadow; +@@ -512,6 +552,10 @@ + + if (priv->minor == GPIO_MINOR_A) + dir_shadow ^= 0xFF; /* Only 8 bits */ ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ else if (priv->minor == GPIO_MINOR_V) ++ dir_shadow ^= 0xFFFF; /* Only 16 bits */ ++#endif + else + dir_shadow ^= 0x3FFFF; /* Only 18 bits */ + return dir_shadow; +@@ -546,6 +590,11 @@ + return -EINVAL; + } + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ if (priv->minor == GPIO_MINOR_V) ++ return virtual_gpio_ioctl(file, cmd, arg); ++#endif ++ + switch (_IOC_NR(cmd)) { + case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */ + // read the port +@@ -553,8 +602,6 @@ + break; + case IO_SETBITS: + local_irq_save(flags); +- if (arg & 0x04) +- printk("GPIO SET 2\n"); + // set changeable bits with a 1 in arg + shadow = *data_out[priv->minor]; + shadow |= (arg & changeable_bits[priv->minor]); +@@ -563,8 +610,6 @@ + break; + case IO_CLRBITS: + local_irq_save(flags); +- if (arg & 0x04) +- printk("GPIO CLR 2\n"); + // clear changeable bits with a 1 in arg + shadow = *data_out[priv->minor]; + shadow &= ~(arg & changeable_bits[priv->minor]); +@@ -574,52 +619,52 @@ + case IO_HIGHALARM: + // set alarm when bits with 1 in arg go high + priv->highalarm |= arg; +- spin_lock(&alarm_lock); ++ spin_lock_irqsave(&alarm_lock, flags); + gpio_some_alarms = 1; + if (priv->minor == GPIO_MINOR_A) { + gpio_pa_high_alarms |= arg; + } +- spin_unlock(&alarm_lock); ++ spin_unlock_irqrestore(&alarm_lock, flags); + break; + case IO_LOWALARM: + // set alarm when bits with 1 in arg go low + priv->lowalarm |= arg; +- spin_lock(&alarm_lock); ++ spin_lock_irqsave(&alarm_lock, flags); + gpio_some_alarms = 1; + if (priv->minor == GPIO_MINOR_A) { + gpio_pa_low_alarms |= arg; + } +- spin_unlock(&alarm_lock); ++ spin_unlock_irqrestore(&alarm_lock, flags); + break; + case IO_CLRALARM: + // clear alarm for bits with 1 in arg + priv->highalarm &= ~arg; + priv->lowalarm &= ~arg; +- spin_lock(&alarm_lock); ++ spin_lock_irqsave(&alarm_lock, flags); + if (priv->minor == GPIO_MINOR_A) { +- if (gpio_pa_high_alarms & arg || ++ if (gpio_pa_high_alarms & arg || + gpio_pa_low_alarms & arg) { + /* Must update the gpio_pa_*alarms masks */ + } + } +- spin_unlock(&alarm_lock); ++ spin_unlock_irqrestore(&alarm_lock, flags); + break; + case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */ + /* Read direction 0=input 1=output */ + return *dir_oe[priv->minor]; + case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */ +- /* Set direction 0=unchanged 1=input, +- * return mask with 1=input ++ /* Set direction 0=unchanged 1=input, ++ * return mask with 1=input + */ + return setget_input(priv, arg); + break; + case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */ +- /* Set direction 0=unchanged 1=output, +- * return mask with 1=output ++ /* Set direction 0=unchanged 1=output, ++ * return mask with 1=output + */ + return setget_output(priv, arg); + +- case IO_CFG_WRITE_MODE: ++ case IO_CFG_WRITE_MODE: + { + unsigned long dir_shadow; + dir_shadow = *dir_oe[priv->minor]; +@@ -641,7 +686,7 @@ + } + break; + } +- case IO_READ_INBITS: ++ case IO_READ_INBITS: + /* *arg is result of reading the input pins */ + val = *data_in[priv->minor]; + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) +@@ -654,7 +699,7 @@ + if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) + return -EFAULT; + break; +- case IO_SETGET_INPUT: ++ case IO_SETGET_INPUT: + /* bits set in *arg is set to input, + * *arg updated with current input pins. + */ +@@ -684,6 +729,132 @@ + return 0; + } + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++static int ++virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ unsigned long flags; ++ unsigned short val; ++ unsigned short shadow; ++ struct gpio_private *priv = (struct gpio_private *)file->private_data; ++ ++ switch (_IOC_NR(cmd)) { ++ case IO_SETBITS: ++ local_irq_save(flags); ++ // set changeable bits with a 1 in arg ++ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ shadow |= ~*dir_oe[priv->minor]; ++ shadow |= (arg & changeable_bits[priv->minor]); ++ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ local_irq_restore(flags); ++ break; ++ case IO_CLRBITS: ++ local_irq_save(flags); ++ // clear changeable bits with a 1 in arg ++ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ shadow |= ~*dir_oe[priv->minor]; ++ shadow &= ~(arg & changeable_bits[priv->minor]); ++ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ local_irq_restore(flags); ++ break; ++ case IO_HIGHALARM: ++ // set alarm when bits with 1 in arg go high ++ priv->highalarm |= arg; ++ spin_lock(&alarm_lock); ++ gpio_some_alarms = 1; ++ spin_unlock(&alarm_lock); ++ break; ++ case IO_LOWALARM: ++ // set alarm when bits with 1 in arg go low ++ priv->lowalarm |= arg; ++ spin_lock(&alarm_lock); ++ gpio_some_alarms = 1; ++ spin_unlock(&alarm_lock); ++ break; ++ case IO_CLRALARM: ++ // clear alarm for bits with 1 in arg ++ priv->highalarm &= ~arg; ++ priv->lowalarm &= ~arg; ++ spin_lock(&alarm_lock); ++ spin_unlock(&alarm_lock); ++ break; ++ case IO_CFG_WRITE_MODE: ++ { ++ unsigned long dir_shadow; ++ dir_shadow = *dir_oe[priv->minor]; ++ ++ priv->clk_mask = arg & 0xFF; ++ priv->data_mask = (arg >> 8) & 0xFF; ++ priv->write_msb = (arg >> 16) & 0x01; ++ /* Check if we're allowed to change the bits and ++ * the direction is correct ++ */ ++ if (!((priv->clk_mask & changeable_bits[priv->minor]) && ++ (priv->data_mask & changeable_bits[priv->minor]) && ++ (priv->clk_mask & dir_shadow) && ++ (priv->data_mask & dir_shadow))) ++ { ++ priv->clk_mask = 0; ++ priv->data_mask = 0; ++ return -EPERM; ++ } ++ break; ++ } ++ case IO_READ_INBITS: ++ /* *arg is result of reading the input pins */ ++ val = cached_virtual_gpio_read; ++ val &= ~*dir_oe[priv->minor]; ++ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) ++ return -EFAULT; ++ return 0; ++ break; ++ case IO_READ_OUTBITS: ++ /* *arg is result of reading the output shadow */ ++ i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val)); ++ val &= *dir_oe[priv->minor]; ++ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) ++ return -EFAULT; ++ break; ++ case IO_SETGET_INPUT: ++ { ++ /* bits set in *arg is set to input, ++ * *arg updated with current input pins. ++ */ ++ unsigned short input_mask = ~*dir_oe[priv->minor]; ++ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) ++ return -EFAULT; ++ val = setget_input(priv, val); ++ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) ++ return -EFAULT; ++ if ((input_mask & val) != input_mask) { ++ /* Input pins changed. All ports desired as input ++ * should be set to logic 1. ++ */ ++ unsigned short change = input_mask ^ val; ++ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ shadow &= ~change; ++ shadow |= val; ++ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ } ++ break; ++ } ++ case IO_SETGET_OUTPUT: ++ /* bits set in *arg is set to output, ++ * *arg updated with current output pins. ++ */ ++ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val))) ++ return -EFAULT; ++ val = setget_output(priv, val); ++ if (copy_to_user((unsigned long*)arg, &val, sizeof(val))) ++ return -EFAULT; ++ break; ++ default: ++ return -EINVAL; ++ } /* switch */ ++ return 0; ++} ++#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */ ++ + static int + gpio_leds_ioctl(unsigned int cmd, unsigned long arg) + { +@@ -714,6 +885,66 @@ + .release = gpio_release, + }; + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++static void ++virtual_gpio_init(void) ++{ ++ reg_gio_rw_intr_cfg intr_cfg; ++ reg_gio_rw_intr_mask intr_mask; ++ unsigned short shadow; ++ ++ shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */ ++ shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT; ++ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow)); ++ ++ /* Set interrupt mask and on what state the interrupt shall trigger. ++ * For virtual gpio the interrupt shall trigger on logic '0'. ++ */ ++ intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg); ++ intr_mask = REG_RD(gio, regi_gio, rw_intr_mask); ++ ++ switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) { ++ case 0: ++ intr_cfg.pa0 = regk_gio_lo; ++ intr_mask.pa0 = regk_gio_yes; ++ break; ++ case 1: ++ intr_cfg.pa1 = regk_gio_lo; ++ intr_mask.pa1 = regk_gio_yes; ++ break; ++ case 2: ++ intr_cfg.pa2 = regk_gio_lo; ++ intr_mask.pa2 = regk_gio_yes; ++ break; ++ case 3: ++ intr_cfg.pa3 = regk_gio_lo; ++ intr_mask.pa3 = regk_gio_yes; ++ break; ++ case 4: ++ intr_cfg.pa4 = regk_gio_lo; ++ intr_mask.pa4 = regk_gio_yes; ++ break; ++ case 5: ++ intr_cfg.pa5 = regk_gio_lo; ++ intr_mask.pa5 = regk_gio_yes; ++ break; ++ case 6: ++ intr_cfg.pa6 = regk_gio_lo; ++ intr_mask.pa6 = regk_gio_yes; ++ break; ++ case 7: ++ intr_cfg.pa7 = regk_gio_lo; ++ intr_mask.pa7 = regk_gio_yes; ++ break; ++ } ++ ++ REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg); ++ REG_WR(gio, regi_gio, rw_intr_mask, intr_mask); ++ ++ gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN); ++ gpio_some_alarms = 1; ++} ++#endif + + /* main driver initialization routine, called from mem.c */ + +@@ -732,17 +963,18 @@ + } + + /* Clear all leds */ +- LED_NETWORK_SET(0); ++ LED_NETWORK_GRP0_SET(0); ++ LED_NETWORK_GRP1_SET(0); + LED_ACTIVE_SET(0); + LED_DISK_READ(0); + LED_DISK_WRITE(0); + +- printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n"); ++ printk("ETRAX FS GPIO driver v2.5, (c) 2003-2006 Axis Communications AB\n"); + /* We call etrax_gpio_wake_up_check() from timer interrupt and + * from cpu_idle() in kernel/process.c + * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms + * in some tests. +- */ ++ */ + if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt, + IRQF_SHARED | IRQF_DISABLED,"gpio poll", &alarmlist)) { + printk("err: timer0 irq for gpio\n"); +@@ -757,6 +989,10 @@ + intr_mask.gen_io = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + ++#ifdef CONFIG_ETRAX_VIRTUAL_GPIO ++ virtual_gpio_init(); ++#endif ++ + return res; + } + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.c 2006-11-06 16:48:06.000000000 +0100 +@@ -8,11 +8,11 @@ + *! + *! Nov 30 1998 Torbjorn Eliasson Initial version. + *! Bjorn Wesen Elinux kernel version. +-*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - ++*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff - + *! don't use PB_I2C if DS1302 uses same bits, + *! use PB. + *| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now +-*| generates nack on last received byte, ++*| generates nack on last received byte, + *| instead of ack. + *| i2c_getack changed data level while clock + *| was high, causing DS75 to see a stop condition +@@ -22,7 +22,7 @@ + *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN + *! + *!***************************************************************************/ +-/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */ ++/* $Id: i2c.c,v 1.6 2006/11/06 15:48:06 imres Exp $ */ + /****************** INCLUDE FILES SECTION ***********************************/ + + #include <linux/module.h> +@@ -60,8 +60,8 @@ + #define I2C_DATA_HIGH 1 + #define I2C_DATA_LOW 0 + +-#define i2c_enable() +-#define i2c_disable() ++#define i2c_enable() ++#define i2c_disable() + + /* enable or disable output-enable, to select output or input on the i2c bus */ + +@@ -79,6 +79,8 @@ + + #define i2c_delay(usecs) udelay(usecs) + ++static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */ ++ + /****************** VARIABLE SECTION ************************************/ + + static struct crisv32_iopin cris_i2c_clk; +@@ -154,7 +156,7 @@ + } else { + i2c_data(I2C_DATA_LOW); + } +- ++ + i2c_delay(CLOCK_LOW_TIME/2); + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); +@@ -213,7 +215,7 @@ + } + i2c_clk(I2C_CLOCK_HIGH); + i2c_delay(CLOCK_HIGH_TIME); +- ++ + /* + * we leave the clock low, getbyte is usually followed + * by sendack/nack, they assume the clock to be low +@@ -252,6 +254,7 @@ + * generate ACK clock pulse + */ + i2c_clk(I2C_CLOCK_HIGH); ++#if 0 + /* + * Use PORT PB instead of I2C + * for input. (I2C not working) +@@ -264,6 +267,8 @@ + i2c_data(1); + i2c_disable(); + i2c_dir_in(); ++#endif ++ + /* + * now wait for ack + */ +@@ -285,13 +290,15 @@ + * before we enable our output. If we keep data high + * and enable output, we would generate a stop condition. + */ ++#if 0 + i2c_data(I2C_DATA_LOW); +- ++ + /* + * end clock pulse + */ + i2c_enable(); + i2c_dir_out(); ++#endif + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_HIGH_TIME/4); + /* +@@ -338,7 +345,7 @@ + */ + i2c_data(I2C_DATA_HIGH); + i2c_delay(CLOCK_LOW_TIME); +- ++ + i2c_dir_in(); + } + +@@ -369,24 +376,160 @@ + i2c_delay(CLOCK_HIGH_TIME); + i2c_clk(I2C_CLOCK_LOW); + i2c_delay(CLOCK_LOW_TIME); +- ++ + i2c_dir_in(); + } + + /*#--------------------------------------------------------------------------- + *# ++*# FUNCTION NAME: i2c_write ++*# ++*# DESCRIPTION : Writes a value to an I2C device ++*# ++*#--------------------------------------------------------------------------*/ ++int ++i2c_write(unsigned char theSlave, void *data, size_t nbytes) ++{ ++ int error, cntr = 3; ++ unsigned char bytes_wrote = 0; ++ unsigned char value; ++ unsigned long flags; ++ ++ spin_lock(&i2c_lock); ++ ++ do { ++ error = 0; ++ /* ++ * we don't like to be interrupted ++ */ ++ local_irq_save(flags); ++ ++ i2c_start(); ++ /* ++ * send slave address ++ */ ++ i2c_outbyte((theSlave & 0xfe)); ++ /* ++ * wait for ack ++ */ ++ if(!i2c_getack()) ++ error = 1; ++ /* ++ * send data ++ */ ++ for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) { ++ memcpy(&value, data + bytes_wrote, sizeof value); ++ i2c_outbyte(value); ++ /* ++ * now it's time to wait for ack ++ */ ++ if (!i2c_getack()) ++ error |= 4; ++ } ++ /* ++ * end byte stream ++ */ ++ i2c_stop(); ++ /* ++ * enable interrupt again ++ */ ++ local_irq_restore(flags); ++ ++ } while(error && cntr--); ++ ++ i2c_delay(CLOCK_LOW_TIME); ++ ++ spin_unlock(&i2c_lock); ++ ++ return -error; ++} ++ ++/*#--------------------------------------------------------------------------- ++*# ++*# FUNCTION NAME: i2c_read ++*# ++*# DESCRIPTION : Reads a value from an I2C device ++*# ++*#--------------------------------------------------------------------------*/ ++int ++i2c_read(unsigned char theSlave, void *data, size_t nbytes) ++{ ++ unsigned char b = 0; ++ unsigned char bytes_read = 0; ++ int error, cntr = 3; ++ unsigned long flags; ++ ++ spin_lock(&i2c_lock); ++ ++ do { ++ error = 0; ++ memset(data, 0, nbytes); ++ /* ++ * we don't like to be interrupted ++ */ ++ local_irq_save(flags); ++ /* ++ * generate start condition ++ */ ++ i2c_start(); ++ ++ /* ++ * send slave address ++ */ ++ i2c_outbyte((theSlave | 0x01)); ++ /* ++ * wait for ack ++ */ ++ if(!i2c_getack()) ++ error = 1; ++ /* ++ * fetch data ++ */ ++ for (bytes_read = 0; bytes_read < nbytes; bytes_read++) { ++ b = i2c_inbyte(); ++ memcpy(data + bytes_read, &b, sizeof b); ++ ++ if (bytes_read < (nbytes - 1)) { ++ i2c_sendack(); ++ } ++ } ++ /* ++ * last received byte needs to be nacked ++ * instead of acked ++ */ ++ i2c_sendnack(); ++ /* ++ * end sequence ++ */ ++ i2c_stop(); ++ /* ++ * enable interrupt again ++ */ ++ local_irq_restore(flags); ++ ++ } while(error && cntr--); ++ ++ spin_unlock(&i2c_lock); ++ ++ return -error; ++} ++ ++/*#--------------------------------------------------------------------------- ++*# + *# FUNCTION NAME: i2c_writereg + *# + *# DESCRIPTION : Writes a value to an I2C device + *# + *#--------------------------------------------------------------------------*/ + int +-i2c_writereg(unsigned char theSlave, unsigned char theReg, ++i2c_writereg(unsigned char theSlave, unsigned char theReg, + unsigned char theValue) + { + int error, cntr = 3; + unsigned long flags; + ++ spin_lock(&i2c_lock); ++ + do { + error = 0; + /* +@@ -431,10 +574,12 @@ + * enable interrupt again + */ + local_irq_restore(flags); +- ++ + } while(error && cntr--); + + i2c_delay(CLOCK_LOW_TIME); ++ ++ spin_unlock(&i2c_lock); + + return -error; + } +@@ -453,6 +598,8 @@ + int error, cntr = 3; + unsigned long flags; + ++ spin_lock(&i2c_lock); ++ + do { + error = 0; + /* +@@ -463,7 +610,7 @@ + * generate start condition + */ + i2c_start(); +- ++ + /* + * send slave address + */ +@@ -482,7 +629,7 @@ + * now it's time to wait for ack + */ + if(!i2c_getack()) +- error = 1; ++ error |= 2; + /* + * repeat start condition + */ +@@ -496,7 +643,7 @@ + * wait for ack + */ + if(!i2c_getack()) +- error = 1; ++ error |= 4; + /* + * fetch register + */ +@@ -514,9 +661,11 @@ + * enable interrupt again + */ + local_irq_restore(flags); +- ++ + } while(error && cntr--); + ++ spin_unlock(&i2c_lock); ++ + return b; + } + +@@ -546,7 +695,7 @@ + switch (_IOC_NR(cmd)) { + case I2C_WRITEREG: + /* write to an i2c slave */ +- D(printk("i2cw %d %d %d\n", ++ D(printk("i2cw %d %d %d\n", + I2C_ARGSLAVE(arg), + I2C_ARGREG(arg), + I2C_ARGVALUE(arg))); +@@ -558,18 +707,18 @@ + { + unsigned char val; + /* read from an i2c slave */ +- D(printk("i2cr %d %d ", ++ D(printk("i2cr %d %d ", + I2C_ARGSLAVE(arg), + I2C_ARGREG(arg))); + val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg)); + D(printk("= %d\n", val)); + return val; +- } ++ } + default: + return -EINVAL; + + } +- ++ + return 0; + } + +@@ -583,28 +732,53 @@ + int __init + i2c_init(void) + { +- int res; ++ static int res = 0; ++ static int first = 1; ++ ++ if (!first) { ++ return res; ++ } ++ first = 0; + +- /* Setup and enable the Port B I2C interface */ ++ /* Setup and enable the DATA and CLK pins */ + +- crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT); +- crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT); ++ res = crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT); ++ if (res < 0) { ++ return res; ++ } ++ ++ res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT); ++ crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out); ++ ++ return res; ++} + +- /* register char device */ + ++int __init ++i2c_register(void) ++{ ++ ++ int res; ++ ++ res = i2c_init(); ++ if (res < 0) { ++ return res; ++ } ++ ++ /* register char device */ + res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops); + if(res < 0) { + printk(KERN_ERR "i2c: couldn't get a major number.\n"); + return res; + } + +- printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n"); +- ++ printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n"); ++ + return 0; + } + + /* this makes sure that i2c_init is called during boot */ + +-module_init(i2c_init); ++module_init(i2c_register); + + /****************** END OF FILE i2c.c ********************************/ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.h linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.h 2006-11-06 16:48:06.000000000 +0100 +@@ -3,6 +3,8 @@ + + /* High level I2C actions */ + int __init i2c_init(void); ++int i2c_write(unsigned char theSlave, void *data, size_t nbytes); ++int i2c_read(unsigned char theSlave, void *data, size_t nbytes); + int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue); + unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg); + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/iop_fw_load.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/iop_fw_load.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/iop_fw_load.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/iop_fw_load.c 2005-04-07 11:27:46.000000000 +0200 +@@ -67,12 +67,12 @@ + return -ENODEV; + + /* get firmware */ +- retval = request_firmware(&fw_entry, +- fw_name, ++ retval = request_firmware(&fw_entry, ++ fw_name, + &iop_spu_device[spu_inst]); + if (retval != 0) + { +- printk(KERN_ERR ++ printk(KERN_ERR + "iop_load_spu: Failed to load firmware \"%s\"\n", + fw_name); + return retval; +@@ -123,7 +123,7 @@ + return retval; + } + +-int iop_fw_load_mpu(unsigned char *fw_name) ++int iop_fw_load_mpu(unsigned char *fw_name) + { + const unsigned int start_addr = 0; + reg_iop_mpu_rw_ctrl mpu_ctrl; +@@ -135,13 +135,13 @@ + retval = request_firmware(&fw_entry, fw_name, &iop_mpu_device); + if (retval != 0) + { +- printk(KERN_ERR ++ printk(KERN_ERR + "iop_load_spu: Failed to load firmware \"%s\"\n", + fw_name); + return retval; + } + data = (u32 *) fw_entry->data; +- ++ + /* disable MPU */ + mpu_ctrl.en = regk_iop_mpu_no; + REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/nandflash.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/nandflash.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/nandflash.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/nandflash.c 2006-10-16 14:56:46.000000000 +0200 +@@ -5,8 +5,8 @@ + * + * Derived from drivers/mtd/nand/spia.c + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) +- * +- * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $ ++ * ++ * $Id: nandflash.c,v 1.8 2006/10/16 12:56:46 ricardw Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as +@@ -32,37 +32,53 @@ + #define ALE_BIT 6 + #define BY_BIT 7 + ++/* Bitmask for control pins */ ++#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT)) ++ ++/* Bitmask for mtd nand control bits */ ++#define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE) ++ ++ + static struct mtd_info *crisv32_mtd = NULL; +-/* ++/* + * hardware specific access to control-lines + */ +-static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd) ++static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd, ++ unsigned int ctrl) + { + unsigned long flags; +- reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout); ++ reg_gio_rw_pa_dout dout; ++ struct nand_chip *this = mtd->priv; + + local_irq_save(flags); +- switch(cmd){ +- case NAND_CTL_SETCLE: +- dout.data |= (1<<CLE_BIT); +- break; +- case NAND_CTL_CLRCLE: +- dout.data &= ~(1<<CLE_BIT); +- break; +- case NAND_CTL_SETALE: +- dout.data |= (1<<ALE_BIT); +- break; +- case NAND_CTL_CLRALE: +- dout.data &= ~(1<<ALE_BIT); +- break; +- case NAND_CTL_SETNCE: +- dout.data |= (1<<CE_BIT); +- break; +- case NAND_CTL_CLRNCE: +- dout.data &= ~(1<<CE_BIT); +- break; ++ ++ /* control bits change */ ++ if (ctrl & NAND_CTRL_CHANGE) { ++ dout = REG_RD(gio, regi_gio, rw_pa_dout); ++ dout.data &= ~PIN_BITMASK; ++ ++#if (CE_BIT == 4 && NAND_NCE == 1 && \ ++ CLE_BIT == 5 && NAND_CLE == 2 && \ ++ ALE_BIT == 6 && NAND_ALE == 4) ++ /* Pins in same order as control bits, but shifted. ++ * Optimize for this case; works for 2.6.18 */ ++ dout.data |= ((ctrl & CTRL_BITMASK) ^ NAND_NCE) << CE_BIT; ++#else ++ /* the slow way */ ++ if (!(ctrl & NAND_NCE)) ++ dout.data |= (1 << CE_BIT); ++ if (ctrl & NAND_CLE) ++ dout.data |= (1 << CLE_BIT); ++ if (ctrl & NAND_ALE) ++ dout.data |= (1 << ALE_BIT); ++#endif ++ REG_WR(gio, regi_gio, rw_pa_dout, dout); + } +- REG_WR(gio, regi_gio, rw_pa_dout, dout); ++ ++ /* command to chip */ ++ if (cmd != NAND_CMD_NONE) ++ writeb(cmd, this->IO_ADDR_W); ++ + local_irq_restore(flags); + } + +@@ -129,26 +145,26 @@ + /* Set address of NAND IO lines */ + this->IO_ADDR_R = read_cs; + this->IO_ADDR_W = write_cs; +- this->hwcontrol = crisv32_hwcontrol; ++ this->cmd_ctrl = crisv32_hwcontrol; + this->dev_ready = crisv32_device_ready; + /* 20 us command delay time */ +- this->chip_delay = 20; +- this->eccmode = NAND_ECC_SOFT; ++ this->chip_delay = 20; ++ this->ecc.mode = NAND_ECC_SOFT; + + /* Enable the following for a flash based bad block table */ +- this->options = NAND_USE_FLASH_BBT; ++ /* this->options = NAND_USE_FLASH_BBT; */ + + /* Scan to find existance of the device */ + if (nand_scan (crisv32_mtd, 1)) { + err = -ENXIO; + goto out_ior; + } +- ++ + return crisv32_mtd; +- ++ + out_ior: + iounmap((void *)read_cs); +- iounmap((void *)write_cs); ++ iounmap((void *)write_cs); + out_mtd: + kfree (crisv32_mtd); + return NULL; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pcf8563.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pcf8563.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pcf8563.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pcf8563.c 2006-10-27 17:22:13.000000000 +0200 +@@ -10,7 +10,7 @@ + * 400 kbits/s. The built-in word address register is incremented + * automatically after each written or read byte. + * +- * Copyright (c) 2002-2003, Axis Communications AB ++ * Copyright (c) 2002-2006, Axis Communications AB + * All rights reserved. + * + * Author: Tobias Anderberg <tobiasa@axis.com>. +@@ -37,24 +37,27 @@ + #define PCF8563_MAJOR 121 /* Local major number. */ + #define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */ + #define PCF8563_NAME "PCF8563" +-#define DRIVER_VERSION "$Revision: 1.1 $" ++#define DRIVER_VERSION "$Revision: 1.9 $" + + /* Two simple wrapper macros, saves a few keystrokes. */ + #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x) + #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y) + ++static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */ ++ + static const unsigned char days_in_month[] = + { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; + + int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long); +-int pcf8563_open(struct inode *, struct file *); +-int pcf8563_release(struct inode *, struct file *); ++ ++/* Cache VL bit value read at driver init since writing the RTC_SECOND ++ * register clears the VL status. ++ */ ++static int voltage_low = 0; + + static struct file_operations pcf8563_fops = { + owner: THIS_MODULE, + ioctl: pcf8563_ioctl, +- open: pcf8563_open, +- release: pcf8563_release, + }; + + unsigned char +@@ -62,7 +65,7 @@ + { + unsigned char res = rtc_read(reg); + +- /* The PCF8563 does not return 0 for unimplemented bits */ ++ /* The PCF8563 does not return 0 for unimplemented bits. */ + switch (reg) { + case RTC_SECONDS: + case RTC_MINUTES: +@@ -95,11 +98,6 @@ + void + pcf8563_writereg(int reg, unsigned char val) + { +-#ifdef CONFIG_ETRAX_RTC_READONLY +- if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR)) +- return; +-#endif +- + rtc_write(reg, val); + } + +@@ -114,11 +112,13 @@ + tm->tm_mon = rtc_read(RTC_MONTH); + tm->tm_year = rtc_read(RTC_YEAR); + +- if (tm->tm_sec & 0x80) ++ if (tm->tm_sec & 0x80) { + printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " + "information is no longer guaranteed!\n", PCF8563_NAME); ++ } + +- tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0); ++ tm->tm_year = BCD_TO_BIN(tm->tm_year) + ++ ((tm->tm_mon & 0x80) ? 100 : 0); + tm->tm_sec &= 0x7F; + tm->tm_min &= 0x7F; + tm->tm_hour &= 0x3F; +@@ -137,8 +137,20 @@ + int __init + pcf8563_init(void) + { ++ static int res = 0; ++ static int first = 1; ++ ++ if (!first) { ++ return res; ++ } ++ first = 0; ++ + /* Initiate the i2c protocol. */ +- i2c_init(); ++ res = i2c_init(); ++ if (res < 0) { ++ printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n"); ++ return res; ++ } + + /* + * First of all we need to reset the chip. This is done by +@@ -170,31 +182,28 @@ + if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0) + goto err; + +- if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { +- printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n", +- PCF8563_NAME, PCF8563_MAJOR); +- return -1; ++ /* Check for low voltage, and warn about it. */ ++ if (rtc_read(RTC_SECONDS) & 0x80) { ++ voltage_low = 1; ++ printk(KERN_WARNING "%s: RTC Voltage Low - reliable " ++ "date/time information is no longer guaranteed!\n", ++ PCF8563_NAME); + } + +- printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); +- +- /* Check for low voltage, and warn about it.. */ +- if (rtc_read(RTC_SECONDS) & 0x80) +- printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " +- "information is no longer guaranteed!\n", PCF8563_NAME); +- +- return 0; ++ return res; + + err: + printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME); +- return -1; ++ res = -1; ++ return res; + } + + void __exit + pcf8563_exit(void) + { + if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) { +- printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME); ++ printk(KERN_INFO "%s: Unable to unregister device.\n", ++ PCF8563_NAME); + } + } + +@@ -203,7 +212,8 @@ + * POSIX says so! + */ + int +-pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg) ++pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, ++ unsigned long arg) + { + /* Some sanity checks. */ + if (_IOC_TYPE(cmd) != RTC_MAGIC) +@@ -217,31 +227,35 @@ + { + struct rtc_time tm; + +- memset(&tm, 0, sizeof (struct rtc_time)); ++ spin_lock(&rtc_lock); ++ memset(&tm, 0, sizeof tm); + get_rtc_time(&tm); + +- if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) { ++ if (copy_to_user((struct rtc_time *) arg, &tm, ++ sizeof tm)) { ++ spin_unlock(&rtc_lock); + return -EFAULT; + } + ++ spin_unlock(&rtc_lock); ++ + return 0; + } +- + case RTC_SET_TIME: + { +-#ifdef CONFIG_ETRAX_RTC_READONLY +- return -EPERM; +-#else + int leap; + int year; + int century; + struct rtc_time tm; + ++ memset(&tm, 0, sizeof tm); + if (!capable(CAP_SYS_TIME)) + return -EPERM; + +- if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm)) ++ if (copy_from_user(&tm, (struct rtc_time *) arg, ++ sizeof tm)) { + return -EFAULT; ++ } + + /* Convert from struct tm to struct rtc_time. */ + tm.tm_year += 1900; +@@ -253,7 +267,8 @@ + * that years divisible by 400 _are_ leap years. + */ + year = tm.tm_year; +- leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); ++ leap = (tm.tm_mon == 2) && ++ ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0); + + /* Perform some sanity checks. */ + if ((tm.tm_year < 1970) || +@@ -263,19 +278,23 @@ + (tm.tm_wday >= 7) || + (tm.tm_hour >= 24) || + (tm.tm_min >= 60) || +- (tm.tm_sec >= 60)) ++ (tm.tm_sec >= 60)) { + return -EINVAL; ++ } + + century = (tm.tm_year >= 2000) ? 0x80 : 0; + tm.tm_year = tm.tm_year % 100; + + BIN_TO_BCD(tm.tm_year); ++ BIN_TO_BCD(tm.tm_mon); + BIN_TO_BCD(tm.tm_mday); + BIN_TO_BCD(tm.tm_hour); + BIN_TO_BCD(tm.tm_min); + BIN_TO_BCD(tm.tm_sec); + tm.tm_mon |= century; + ++ spin_lock(&rtc_lock); ++ + rtc_write(RTC_YEAR, tm.tm_year); + rtc_write(RTC_MONTH, tm.tm_mon); + rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */ +@@ -284,36 +303,40 @@ + rtc_write(RTC_MINUTES, tm.tm_min); + rtc_write(RTC_SECONDS, tm.tm_sec); + ++ spin_unlock(&rtc_lock); ++ + return 0; +-#endif /* !CONFIG_ETRAX_RTC_READONLY */ + } +- + case RTC_VLOW_RD: +- { +- int vl_bit = 0; +- +- if (rtc_read(RTC_SECONDS) & 0x80) { +- vl_bit = 1; +- printk(KERN_WARNING "%s: RTC Voltage Low - reliable " +- "date/time information is no longer guaranteed!\n", +- PCF8563_NAME); ++ if (voltage_low) { ++ printk(KERN_WARNING "%s: RTC Voltage Low - " ++ "reliable date/time information is no " ++ "longer guaranteed!\n", PCF8563_NAME); + } +- if (copy_to_user((int *) arg, &vl_bit, sizeof(int))) +- return -EFAULT; + ++ if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) { ++ return -EFAULT; ++ } ++ + return 0; +- } + + case RTC_VLOW_SET: + { +- /* Clear the VL bit in the seconds register */ ++ /* Clear the VL bit in the seconds register in case ++ * the time has not been set already (which would ++ * have cleared it). This does not really matter ++ * because of the cached voltage_low value but do it ++ * anyway for consistency. */ ++ + int ret = rtc_read(RTC_SECONDS); + + rtc_write(RTC_SECONDS, (ret & 0x7F)); + ++ /* Clear the cached value. */ ++ voltage_low = 0; ++ + return 0; + } +- + default: + return -ENOTTY; + } +@@ -321,17 +344,32 @@ + return 0; + } + +-int +-pcf8563_open(struct inode *inode, struct file *filp) ++static int __init ++pcf8563_register(void) + { +- return 0; +-} ++ if (pcf8563_init() < 0) { ++ printk(KERN_INFO "%s: Unable to initialize Real-Time Clock " ++ "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION); ++ return -1; ++ } ++ ++ if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) { ++ printk(KERN_INFO "%s: Unable to get major numer %d for RTC " ++ "device.\n", PCF8563_NAME, PCF8563_MAJOR); ++ return -1; ++ } ++ ++ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, ++ DRIVER_VERSION); ++ ++ /* Check for low voltage, and warn about it. */ ++ if (voltage_low) { ++ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time " ++ "information is no longer guaranteed!\n", PCF8563_NAME); ++ } + +-int +-pcf8563_release(struct inode *inode, struct file *filp) +-{ + return 0; + } + +-module_init(pcf8563_init); ++module_init(pcf8563_register); + module_exit(pcf8563_exit); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/bios.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/bios.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/bios.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/bios.c 2006-10-13 14:43:15.000000000 +0200 +@@ -60,7 +60,7 @@ + u16 cmd, old_cmd; + int idx; + struct resource *r; +- ++ + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/dma.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/dma.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/dma.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/dma.c 2005-10-31 09:48:04.000000000 +0100 +@@ -62,7 +62,7 @@ + { + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); +- ++ + if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { + int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; + +@@ -120,7 +120,7 @@ + void dma_release_declared_memory(struct device *dev) + { + struct dma_coherent_mem *mem = dev->dma_mem; +- ++ + if(!mem) + return; + dev->dma_mem = NULL; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/sync_serial.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/sync_serial.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/sync_serial.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/sync_serial.c 2007-01-09 10:29:20.000000000 +0100 +@@ -50,7 +50,7 @@ + /* readp writep */ + /* */ + /* If the application keeps up the pace readp will be right after writep.*/ +-/* If the application can't keep the pace we have to throw away data. */ ++/* If the application can't keep the pace we have to throw away data. */ + /* The idea is that readp should be ready with the data pointed out by */ + /* Descr[i] when the DMA has filled in Descr[i+1]. */ + /* Otherwise we will discard */ +@@ -65,6 +65,7 @@ + #define IN_DESCR_SIZE 256 + #define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE) + #define OUT_BUFFER_SIZE 4096 ++#define NUM_OUT_DESCRS 4 + + #define DEFAULT_FRAME_RATE 0 + #define DEFAULT_WORD_RATE 7 +@@ -112,7 +113,7 @@ + + dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16))); + dma_descr_context in_context __attribute__ ((__aligned__(32))); +- dma_descr_data out_descr __attribute__ ((__aligned__(16))); ++ dma_descr_data out_descr[NUM_OUT_DESCRS] __attribute__ ((__aligned__(16))); + dma_descr_context out_context __attribute__ ((__aligned__(32))); + wait_queue_head_t out_wait_q; + wait_queue_head_t in_wait_q; +@@ -130,9 +131,9 @@ + + static int sync_serial_ioctl(struct inode*, struct file*, + unsigned int cmd, unsigned long arg); +-static ssize_t sync_serial_write(struct file * file, const char * buf, ++static ssize_t sync_serial_write(struct file * file, const char * buf, + size_t count, loff_t *ppos); +-static ssize_t sync_serial_read(struct file *file, char *buf, ++static ssize_t sync_serial_read(struct file *file, char *buf, + size_t count, loff_t *ppos); + + #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ +@@ -146,8 +147,8 @@ + static void start_dma(struct sync_port *port, const char* data, int count); + static void start_dma_in(sync_port* port); + #ifdef SYNC_SER_DMA +-static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs); +-static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs); ++static irqreturn_t tr_interrupt(int irq, void *dev_id); ++static irqreturn_t rx_interrupt(int irq, void *dev_id); + #endif + + #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \ +@@ -157,7 +158,7 @@ + #define SYNC_SER_MANUAL + #endif + #ifdef SYNC_SER_MANUAL +-static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs); ++static irqreturn_t manual_interrupt(int irq, void *dev_id); + #endif + + /* The ports */ +@@ -201,8 +202,8 @@ + { + ports[0].enabled = 0; + ports[1].enabled = 0; +- +- if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) ++ ++ if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 ) + { + printk("unable to get major for synchronous serial port\n"); + return -EBUSY; +@@ -243,13 +244,13 @@ + + DEBUG(printk("Init sync serial port %d\n", portnbr)); + +- port->port_nbr = portnbr; ++ port->port_nbr = portnbr; + port->init_irqs = 1; + + port->outp = port->out_buffer; + port->output = 1; + port->input = 0; +- ++ + port->readp = port->flip; + port->writep = port->flip; + port->in_buffer_size = IN_BUFFER_SIZE; +@@ -286,11 +287,16 @@ + tr_cfg.sample_size = 7; + tr_cfg.sh_dir = regk_sser_msbfirst; + tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; ++#if 0 + tr_cfg.rate_ctrl = regk_sser_bulk; + tr_cfg.data_pin_use = regk_sser_dout; ++#else ++ tr_cfg.rate_ctrl = regk_sser_iso; ++ tr_cfg.data_pin_use = regk_sser_dout; ++#endif + tr_cfg.bulk_wspace = 1; + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); +- ++ + rec_cfg.sample_size = 7; + rec_cfg.sh_dir = regk_sser_msbfirst; + rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no; +@@ -303,17 +309,17 @@ + int avail; + unsigned char *start; + unsigned char *end; +- ++ + start = (unsigned char*)port->readp; /* cast away volatile */ + end = (unsigned char*)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- - ----- + * ^rp ^wp ^wp ^rp + */ +- ++ + if (end >= start) + avail = end - start; +- else ++ else + avail = port->in_buffer_size - (start - end); + return avail; + } +@@ -323,17 +329,17 @@ + int avail; + unsigned char *start; + unsigned char *end; +- ++ + start = (unsigned char*)port->readp; /* cast away volatile */ + end = (unsigned char*)port->writep; /* cast away volatile */ + /* 0123456789 0123456789 + * ----- ----- + * ^rp ^wp ^wp ^rp + */ +- ++ + if (end >= start) + avail = end - start; +- else ++ else + avail = port->flip + port->in_buffer_size - start; + return avail; + } +@@ -343,10 +349,10 @@ + int dev = iminor(inode); + sync_port* port; + reg_dma_rw_cfg cfg = {.en = regk_dma_yes}; +- reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; +- +- DEBUG(printk("Open sync serial port %d\n", dev)); ++ reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes}; + ++ DEBUG(printk("Open sync serial port %d\n", dev)); ++ + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); +@@ -354,7 +360,7 @@ + } + port = &ports[dev]; + /* Allow open this device twice (assuming one reader and one writer) */ +- if (port->busy == 2) ++ if (port->busy == 2) + { + DEBUG(printk("Device is busy.. \n")); + return -EBUSY; +@@ -422,8 +428,8 @@ + DMA_VERBOSE_ON_ERROR, + 0, + dma_sser1)) { +- free_irq(21, &ports[1]); +- free_irq(20, &ports[1]); ++ free_irq(DMA6_INTR_VECT, &ports[1]); ++ free_irq(DMA7_INTR_VECT, &ports[1]); + printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel"); + return -EBUSY; + } else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR, +@@ -446,7 +452,7 @@ + /* Enable DMA IRQs */ + REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask); + REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask); +- /* Set up wordsize = 2 for DMAs. */ ++ /* Set up wordsize = 1 for DMAs. */ + DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1); + DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1); + +@@ -497,7 +503,7 @@ + port = &ports[dev]; + if (port->busy) + port->busy--; +- if (!port->busy) ++ if (!port->busy) + /* XXX */ ; + return 0; + } +@@ -508,17 +514,29 @@ + unsigned int mask = 0; + sync_port* port; + DEBUGPOLL( static unsigned int prev_mask = 0; ); +- ++ + port = &ports[dev]; ++ ++ if (!port->started) ++ { ++ reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); ++ reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); ++ cfg.en = regk_sser_yes; ++ rec_cfg.rec_en = port->input; ++ REG_WR(sser, port->regi_sser, rw_cfg, cfg); ++ REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); ++ port->started = 1; ++ } ++ + poll_wait(file, &port->out_wait_q, wait); + poll_wait(file, &port->in_wait_q, wait); + /* Some room to write */ +- if (port->out_count < OUT_BUFFER_SIZE) ++ if (port->output && port->out_count < OUT_BUFFER_SIZE) + mask |= POLLOUT | POLLWRNORM; + /* At least an inbufchunk of data */ +- if (sync_data_avail(port) >= port->inbufchunk) ++ if (port->input && sync_data_avail(port) >= port->inbufchunk) + mask |= POLLIN | POLLRDNORM; +- ++ + DEBUGPOLL(if (mask != prev_mask) + printk("sync_serial_poll: mask 0x%08X %s %s\n", mask, + mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":""); +@@ -531,14 +549,15 @@ + unsigned int cmd, unsigned long arg) + { + int return_val = 0; ++ int dma_w_size = regk_dma_set_w_size1; + int dev = iminor(file->f_dentry->d_inode); + sync_port* port; + reg_sser_rw_tr_cfg tr_cfg; + reg_sser_rw_rec_cfg rec_cfg; +- reg_sser_rw_frm_cfg frm_cfg; ++ reg_sser_rw_frm_cfg frm_cfg; + reg_sser_rw_cfg gen_cfg; + reg_sser_rw_intr_mask intr_mask; +- ++ + if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled) + { + DEBUG(printk("Invalid minor %d\n", dev)); +@@ -558,9 +577,32 @@ + case SSP_SPEED: + if (GET_SPEED(arg) == CODEC) + { ++ unsigned int freq; ++ + gen_cfg.base_freq = regk_sser_f32; +- /* FREQ = 0 => 4 MHz => clk_div = 7*/ +- gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg)); ++ ++ /* Clock divider will internally be ++ * gen_cfg.clk_div + 1. ++ */ ++ ++ freq = GET_FREQ(arg); ++ switch (freq) ++ { ++ case FREQ_32kHz: ++ case FREQ_64kHz: ++ case FREQ_128kHz: ++ case FREQ_256kHz: ++ gen_cfg.clk_div = 125 * (1 << (freq - FREQ_256kHz)) - 1; ++ break; ++ case FREQ_512kHz: ++ gen_cfg.clk_div = 62; ++ break; ++ case FREQ_1MHz: ++ case FREQ_2MHz: ++ case FREQ_4MHz: ++ gen_cfg.clk_div = 8 * (1 << freq) - 1; ++ break; ++ } + } + else + { +@@ -625,87 +667,118 @@ + case MASTER_OUTPUT: + port->output = 1; + port->input = 0; ++ frm_cfg.out_on = regk_sser_tr; ++ frm_cfg.frame_pin_dir = regk_sser_out; + gen_cfg.clk_dir = regk_sser_out; + break; + case SLAVE_OUTPUT: + port->output = 1; + port->input = 0; ++ frm_cfg.frame_pin_dir = regk_sser_in; + gen_cfg.clk_dir = regk_sser_in; + break; + case MASTER_INPUT: + port->output = 0; + port->input = 1; ++ frm_cfg.frame_pin_dir = regk_sser_out; ++ frm_cfg.out_on = regk_sser_intern_tb; + gen_cfg.clk_dir = regk_sser_out; + break; + case SLAVE_INPUT: + port->output = 0; + port->input = 1; ++ frm_cfg.frame_pin_dir = regk_sser_in; + gen_cfg.clk_dir = regk_sser_in; + break; + case MASTER_BIDIR: + port->output = 1; + port->input = 1; ++ frm_cfg.frame_pin_dir = regk_sser_out; ++ frm_cfg.out_on = regk_sser_intern_tb; + gen_cfg.clk_dir = regk_sser_out; + break; + case SLAVE_BIDIR: + port->output = 1; + port->input = 1; ++ frm_cfg.frame_pin_dir = regk_sser_in; + gen_cfg.clk_dir = regk_sser_in; + break; + default: + spin_unlock_irq(&port->lock); + return -EINVAL; +- ++ + } + if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)) + intr_mask.rdav = regk_sser_yes; + break; + case SSP_FRAME_SYNC: +- if (arg & NORMAL_SYNC) ++ if (arg & NORMAL_SYNC) { ++ frm_cfg.rec_delay = 1; + frm_cfg.tr_delay = 1; ++ } + else if (arg & EARLY_SYNC) +- frm_cfg.tr_delay = 0; ++ frm_cfg.rec_delay = frm_cfg.tr_delay = 0; ++ else if (arg & SECOND_WORD_SYNC) { ++ frm_cfg.rec_delay = 17; ++ frm_cfg.tr_delay = 1; ++ } ++ ++ + + tr_cfg.bulk_wspace = frm_cfg.tr_delay; + frm_cfg.early_wend = regk_sser_yes; +- if (arg & BIT_SYNC) ++ if (arg & BIT_SYNC) + frm_cfg.type = regk_sser_edge; + else if (arg & WORD_SYNC) + frm_cfg.type = regk_sser_level; + else if (arg & EXTENDED_SYNC) + frm_cfg.early_wend = regk_sser_no; +- ++ + if (arg & SYNC_ON) + frm_cfg.frame_pin_use = regk_sser_frm; + else if (arg & SYNC_OFF) + frm_cfg.frame_pin_use = regk_sser_gio0; +- +- if (arg & WORD_SIZE_8) ++ ++ if (arg & WORD_SIZE_8) { + rec_cfg.sample_size = tr_cfg.sample_size = 7; +- else if (arg & WORD_SIZE_12) ++ dma_w_size = regk_dma_set_w_size1; ++ } ++ else if (arg & WORD_SIZE_12) { + rec_cfg.sample_size = tr_cfg.sample_size = 11; +- else if (arg & WORD_SIZE_16) ++ dma_w_size = regk_dma_set_w_size2; ++ } ++ else if (arg & WORD_SIZE_16) { + rec_cfg.sample_size = tr_cfg.sample_size = 15; +- else if (arg & WORD_SIZE_24) ++ dma_w_size = regk_dma_set_w_size2; ++ } ++ else if (arg & WORD_SIZE_24) { + rec_cfg.sample_size = tr_cfg.sample_size = 23; +- else if (arg & WORD_SIZE_32) ++ dma_w_size = regk_dma_set_w_size2; ++ } ++ else if (arg & WORD_SIZE_32) { + rec_cfg.sample_size = tr_cfg.sample_size = 31; ++ dma_w_size = regk_dma_set_w_size2; ++ } + + if (arg & BIT_ORDER_MSB) + rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst; + else if (arg & BIT_ORDER_LSB) + rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst; +- +- if (arg & FLOW_CONTROL_ENABLE) ++ ++ if (arg & FLOW_CONTROL_ENABLE) { ++ frm_cfg.status_pin_use = regk_sser_frm; + rec_cfg.fifo_thr = regk_sser_thr16; +- else if (arg & FLOW_CONTROL_DISABLE) ++ } ++ else if (arg & FLOW_CONTROL_DISABLE) { ++ frm_cfg.status_pin_use = regk_sser_gio0; + rec_cfg.fifo_thr = regk_sser_inf; ++ } + + if (arg & CLOCK_NOT_GATED) + gen_cfg.gate_clk = regk_sser_no; + else if (arg & CLOCK_GATED) + gen_cfg.gate_clk = regk_sser_yes; +- ++ + break; + case SSP_IPOLARITY: + /* NOTE!! negedge is considered NORMAL */ +@@ -713,12 +786,12 @@ + rec_cfg.clk_pol = regk_sser_neg; + else if (arg & CLOCK_INVERT) + rec_cfg.clk_pol = regk_sser_pos; +- ++ + if (arg & FRAME_NORMAL) + frm_cfg.level = regk_sser_pos_hi; + else if (arg & FRAME_INVERT) + frm_cfg.level = regk_sser_neg_lo; +- ++ + if (arg & STATUS_NORMAL) + gen_cfg.hold_pol = regk_sser_pos; + else if (arg & STATUS_INVERT) +@@ -726,15 +799,15 @@ + break; + case SSP_OPOLARITY: + if (arg & CLOCK_NORMAL) +- gen_cfg.out_clk_pol = regk_sser_neg; +- else if (arg & CLOCK_INVERT) + gen_cfg.out_clk_pol = regk_sser_pos; +- ++ else if (arg & CLOCK_INVERT) ++ gen_cfg.out_clk_pol = regk_sser_neg; ++ + if (arg & FRAME_NORMAL) + frm_cfg.level = regk_sser_pos_hi; + else if (arg & FRAME_INVERT) + frm_cfg.level = regk_sser_neg_lo; +- ++ + if (arg & STATUS_NORMAL) + gen_cfg.hold_pol = regk_sser_pos; + else if (arg & STATUS_INVERT) +@@ -772,9 +845,10 @@ + + if (port->started) + { +- tr_cfg.tr_en = port->output; + rec_cfg.rec_en = port->input; ++ gen_cfg.en = (port->output | port->input); + } ++ + + REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); +@@ -782,11 +856,24 @@ + REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask); + REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); + ++ ++ if (cmd == SSP_FRAME_SYNC && ++ (arg & (WORD_SIZE_8 | WORD_SIZE_12 | WORD_SIZE_16 | WORD_SIZE_24 | WORD_SIZE_32))) { ++ int en = gen_cfg.en; ++ gen_cfg.en = 0; ++ REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); ++ /* ##### Should DMA be stoped before we change dma size? */ ++ DMA_WR_CMD (port->regi_dmain, dma_w_size); ++ DMA_WR_CMD (port->regi_dmaout, dma_w_size); ++ gen_cfg.en = en; ++ REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg); ++ } ++ + spin_unlock_irq(&port->lock); + return return_val; + } + +-static ssize_t sync_serial_write(struct file * file, const char * buf, ++static ssize_t sync_serial_write(struct file * file, const char * buf, + size_t count, loff_t *ppos) + { + int dev = iminor(file->f_dentry->d_inode); +@@ -807,7 +894,7 @@ + + DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE)); + /* Space to end of buffer */ +- /* ++ /* + * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE + * outp^ +out_count + ^free_outp +@@ -824,7 +911,7 @@ + free_outp = outp + port->out_count; + spin_unlock_irqrestore(&port->lock, flags); + out_buffer = (unsigned long)port->out_buffer; +- ++ + /* Find out where and how much to write */ + if (free_outp >= out_buffer + OUT_BUFFER_SIZE) + free_outp -= OUT_BUFFER_SIZE; +@@ -834,7 +921,7 @@ + c = outp - free_outp; + if (c > count) + c = count; +- ++ + // DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c)); + if (copy_from_user((void*)free_outp, buf, c)) + return -EFAULT; +@@ -854,13 +941,10 @@ + if (!port->started) + { + reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg); +- reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); + reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg); + cfg.en = regk_sser_yes; +- tr_cfg.tr_en = port->output; + rec_cfg.rec_en = port->input; + REG_WR(sser, port->regi_sser, rw_cfg, cfg); +- REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg); + port->started = 1; + } +@@ -887,7 +971,7 @@ + } + + /* Sleep until all sent */ +- ++ + add_wait_queue(&port->out_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_lock_irqsave(&port->lock, flags); +@@ -916,13 +1000,13 @@ + return count; + } + +-static ssize_t sync_serial_read(struct file * file, char * buf, ++static ssize_t sync_serial_read(struct file * file, char * buf, + size_t count, loff_t *ppos) + { + int dev = iminor(file->f_dentry->d_inode); + int avail; + sync_port *port; +- unsigned char* start; ++ unsigned char* start; + unsigned char* end; + unsigned long flags; + +@@ -949,7 +1033,7 @@ + port->started = 1; + } + +- ++ + /* Calculate number of available bytes */ + /* Save pointers to avoid that they are modified by interrupt */ + spin_lock_irqsave(&port->lock, flags); +@@ -958,11 +1042,12 @@ + spin_unlock_irqrestore(&port->lock, flags); + while ((start == end) && !port->full) /* No data */ + { ++ DEBUGREAD(printk("&")); + if (file->f_flags & O_NONBLOCK) +- { ++ { + return -EAGAIN; + } +- ++ + interruptible_sleep_on(&port->in_wait_q); + if (signal_pending(current)) + { +@@ -979,9 +1064,9 @@ + avail = port->in_buffer_size; + else if (end > start) + avail = end - start; +- else ++ else + avail = port->flip + port->in_buffer_size - start; +- ++ + count = count > avail ? avail : count; + if (copy_to_user(buf, start, count)) + return -EFAULT; +@@ -1016,7 +1101,7 @@ + data |= *port->outp++; + port->out_count-=2; + tr_data.data = data; +- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); ++ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; + } +@@ -1032,7 +1117,7 @@ + case 24: + port->out_count-=3; + tr_data.data = *(unsigned short *)port->outp; +- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); ++ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + tr_data.data = *port->outp++; + REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); +@@ -1042,10 +1127,10 @@ + case 32: + port->out_count-=4; + tr_data.data = *(unsigned short *)port->outp; +- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); ++ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + tr_data.data = *(unsigned short *)port->outp; +- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); ++ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data); + port->outp+=2; + if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE) + port->outp = port->out_buffer; +@@ -1056,15 +1141,27 @@ + + static void start_dma(struct sync_port* port, const char* data, int count) + { ++ int i; ++ reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); + port->tr_running = 1; +- port->out_descr.buf = (char*)virt_to_phys((char*)data); +- port->out_descr.after = port->out_descr.buf + count; +- port->out_descr.eol = port->out_descr.intr = 1; ++ for (i = 0; i < NUM_OUT_DESCRS; i++) ++ { ++ port->out_descr[i].buf = (char*)virt_to_phys(port->out_buffer + 1024*i); ++ port->out_descr[i].after = port->out_descr[i].buf + 1024; ++ port->out_descr[i].eol = 0; ++ port->out_descr[i].intr = 1; ++ port->out_descr[i].next = virt_to_phys(&port->out_descr[i+1]); ++ } ++ port->out_descr[i-1].next = virt_to_phys(&port->out_descr[0]); + +- port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr); +- port->out_context.saved_data_buf = port->out_descr.buf; ++ port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr[0]); ++ port->out_context.saved_data_buf = port->out_descr[0].buf; + + DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context)); ++ ++ tr_cfg.tr_en = regk_sser_yes; ++ REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); ++ + DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count)); + } + +@@ -1073,7 +1170,7 @@ + int i; + char* buf; + port->writep = port->flip; +- ++ + if (port->writep > port->flip + port->in_buffer_size) + { + panic("Offset too large in sync serial driver\n"); +@@ -1099,7 +1196,7 @@ + } + + #ifdef SYNC_SER_DMA +-static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++static irqreturn_t tr_interrupt(int irq, void *dev_id) + { + reg_dma_r_masked_intr masked; + reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; +@@ -1108,7 +1205,7 @@ + unsigned int sentl; + int found = 0; + +- for (i = 0; i < NUMBER_OF_PORTS; i++) ++ for (i = 0; i < NUMBER_OF_PORTS; i++) + { + sync_port *port = &ports[i]; + if (!port->enabled || !port->use_dma ) +@@ -1133,18 +1230,21 @@ + if (c > port->out_count) + c = port->out_count; + DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c)); +- start_dma(port, port->outp, c); ++ //start_dma(port, port->outp, c); + } else { +- DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); ++ reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg); ++ DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl)); + port->tr_running = 0; ++ tr_cfg.tr_en = regk_sser_no; ++ REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg); + } + wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */ +- } ++ } + } + return IRQ_RETVAL(found); + } /* tr_interrupt */ + +-static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++static irqreturn_t rx_interrupt(int irq, void *dev_id) + { + reg_dma_r_masked_intr masked; + reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes}; +@@ -1152,7 +1252,7 @@ + int i; + int found = 0; + +- for (i = 0; i < NUMBER_OF_PORTS; i++) ++ for (i = 0; i < NUMBER_OF_PORTS; i++) + { + sync_port *port = &ports[i]; + +@@ -1164,17 +1264,17 @@ + if (masked.data) /* Descriptor interrupt */ + { + found = 1; +- while (REG_RD(dma, port->regi_dmain, rw_data) != ++ while (REG_RD(dma, port->regi_dmain, rw_data) != + virt_to_phys(port->next_rx_desc)) { +- ++ DEBUGRXINT(printk("!")); + if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) { + int first_size = port->flip + port->in_buffer_size - port->writep; + memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size); + memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size); + port->writep = port->flip + port->inbufchunk - first_size; + } else { +- memcpy((char*)port->writep, +- phys_to_virt((unsigned)port->next_rx_desc->buf), ++ memcpy((char*)port->writep, ++ phys_to_virt((unsigned)port->next_rx_desc->buf), + port->inbufchunk); + port->writep += port->inbufchunk; + if (port->writep >= port->flip + port->in_buffer_size) +@@ -1184,11 +1284,13 @@ + { + port->full = 1; + } +- +- port->next_rx_desc->eol = 0; +- port->prev_rx_desc->eol = 1; +- port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc); ++ ++ port->next_rx_desc->eol = 1; ++ port->prev_rx_desc->eol = 0; ++ flush_dma_descr(port->prev_rx_desc,0); // Cache bug workaround ++ port->prev_rx_desc = port->next_rx_desc; + port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next); ++ flush_dma_descr(port->prev_rx_desc,1); // Cache bug workaround + wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */ + DMA_CONTINUE(port->regi_dmain); + REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr); +@@ -1201,7 +1303,7 @@ + #endif /* SYNC_SER_DMA */ + + #ifdef SYNC_SER_MANUAL +-static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++static irqreturn_t manual_interrupt(int irq, void *dev_id) + { + int i; + int found = 0; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/Makefile 2006-12-06 14:17:02.000000000 +0100 +@@ -1,4 +1,4 @@ +-# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $ ++# $Id: Makefile,v 1.13 2006/12/06 13:17:02 starvik Exp $ + # + # Makefile for the linux kernel. + # +@@ -8,7 +8,7 @@ + + obj-y := entry.o traps.o irq.o debugport.o dma.o pinmux.o \ + process.o ptrace.o setup.o signal.o traps.o time.o \ +- arbiter.o io.o ++ arbiter.o io.o cache.o cacheflush.o + + obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o + +@@ -16,6 +16,7 @@ + obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o + obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o + obj-$(CONFIG_MODULES) += crisksyms.o ++obj-$(CONFIG_CPU_FREQ) += cpufreq.o + + clean: + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/arbiter.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/arbiter.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/arbiter.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/arbiter.c 2006-10-13 14:43:13.000000000 +0200 +@@ -6,7 +6,7 @@ + * bandwidth (e.g. ethernet) and then the remaining slots are divided + * on all the active clients. + * +- * Copyright (c) 2004, 2005 Axis Communications AB. ++ * Copyright (c) 2004, 2005, 2006 Axis Communications AB. + */ + + #include <asm/arch/hwregs/reg_map.h> +@@ -44,35 +44,88 @@ + {regi_marb_bp3} + }; + +-static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; +-static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; ++static u8 requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS]; ++static u8 active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS]; + static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH}; + + DEFINE_SPINLOCK(arbiter_lock); + +-static irqreturn_t ++static irqreturn_t + crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs); + +-static void crisv32_arbiter_config(int region) ++/* ++ * "I'm the arbiter, I know the score. ++ * From square one I'll be watching all 64." ++ * (memory arbiter slots, that is) ++ * ++ * Or in other words: ++ * Program the memory arbiter slots for "region" according to what's ++ * in requested_slots[] and active_clients[], while minimizing ++ * latency. A caller may pass a non-zero positive amount for ++ * "unused_slots", which must then be the unallocated, remaining ++ * number of slots, free to hand out to any client. ++ */ ++ ++static void crisv32_arbiter_config(int region, int unused_slots) + { + int slot; + int client; + int interval = 0; +- int val[NBR_OF_SLOTS]; ++ ++ /* ++ * This vector corresponds to the hardware arbiter slots (see ++ * the hardware documentation for semantics). We initialize ++ * each slot with a suitable sentinel value outside the valid ++ * range {0 .. NBR_OF_CLIENTS - 1} and replace them with ++ * client indexes. Then it's fed to the hardware. ++ */ ++ s8 val[NBR_OF_SLOTS]; + + for (slot = 0; slot < NBR_OF_SLOTS; slot++) +- val[slot] = NBR_OF_CLIENTS + 1; ++ val[slot] = -1; + + for (client = 0; client < NBR_OF_CLIENTS; client++) + { + int pos; ++ /* Allocate the requested non-zero number of slots, but ++ * also give clients with zero-requests one slot each ++ * while stocks last. We do the latter here, in client ++ * order. This makes sure zero-request clients are the ++ * first to get to any spare slots, else those slots ++ * could, when bandwidth is allocated close to the limit, ++ * all be allocated to low-index non-zero-request clients ++ * in the default-fill loop below. Another positive but ++ * secondary effect is a somewhat better spread of the ++ * zero-bandwidth clients in the vector, avoiding some of ++ * the latency that could otherwise be caused by the ++ * partitioning of non-zero-bandwidth clients at low ++ * indexes and zero-bandwidth clients at high ++ * indexes. (Note that this spreading can only affect the ++ * unallocated bandwidth.) All the above only matters for ++ * memory-intensive situations, of course. ++ */ + if (!requested_slots[region][client]) +- continue; +- interval = NBR_OF_SLOTS / requested_slots[region][client]; ++ { ++ /* ++ * Skip inactive clients. Also skip zero-slot ++ * allocations in this pass when there are no known ++ * free slots. ++ */ ++ if (!active_clients[region][client] || unused_slots <= 0) ++ continue; ++ ++ unused_slots--; ++ ++ /* Only allocate one slot for this client. */ ++ interval = NBR_OF_SLOTS; ++ } ++ else ++ interval = NBR_OF_SLOTS / requested_slots[region][client]; ++ + pos = 0; + while (pos < NBR_OF_SLOTS) + { +- if (val[pos] != NBR_OF_CLIENTS + 1) ++ if (val[pos] >= 0) + pos++; + else + { +@@ -85,7 +138,13 @@ + client = 0; + for (slot = 0; slot < NBR_OF_SLOTS; slot++) + { +- if (val[slot] == NBR_OF_CLIENTS + 1) ++ /* ++ * Allocate remaining slots in round-robin ++ * client-number order for active clients. For this ++ * pass, we ignore requested bandwidth and previous ++ * allocations. ++ */ ++ if (val[slot] < 0) + { + int first = client; + while(!active_clients[region][client]) { +@@ -100,7 +159,7 @@ + REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]); + else if (region == INT_REGION) + REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]); +- } ++ } + } + + extern char _stext, _etext; +@@ -111,18 +170,28 @@ + + if (initialized) + return; +- ++ + initialized = 1; + +- /* CPU caches are active. */ +- active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; +- crisv32_arbiter_config(EXT_REGION); +- crisv32_arbiter_config(INT_REGION); ++ /* ++ * CPU caches are always set to active, but with zero ++ * bandwidth allocated. It should be ok to allocate zero ++ * bandwidth for the caches, because DMA for other channels ++ * will supposedly finish, once their programmed amount is ++ * done, and then the caches will get access according to the ++ * "fixed scheme" for unclaimed slots. Though, if for some ++ * use-case somewhere, there's a maximum CPU latency for ++ * e.g. some interrupt, we have to start allocating specific ++ * bandwidth for the CPU caches too. ++ */ ++ active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1; ++ crisv32_arbiter_config(EXT_REGION, 0); ++ crisv32_arbiter_config(INT_REGION, 0); + + if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED, + "arbiter", NULL)) + printk(KERN_ERR "Couldn't allocate arbiter IRQ\n"); +- ++ + #ifndef CONFIG_ETRAX_KGDB + /* Global watch for writes to kernel text segment. */ + crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext, +@@ -130,6 +199,7 @@ + #endif + } + ++/* Main entry for bandwidth allocation. */ + + + int crisv32_arbiter_allocate_bandwidth(int client, int region, +@@ -141,39 +211,76 @@ + int req; + + crisv32_arbiter_init(); +- ++ + for (i = 0; i < NBR_OF_CLIENTS; i++) + { + total_assigned += requested_slots[region][i]; + total_clients += active_clients[region][i]; + } +- req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); + +- if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS) ++ /* Avoid division by 0 for 0-bandwidth requests. */ ++ req = bandwidth == 0 ++ ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth); ++ ++ /* ++ * We make sure that there are enough slots only for non-zero ++ * requests. Requesting 0 bandwidth *may* allocate slots, ++ * though if all bandwidth is allocated, such a client won't ++ * get any and will have to rely on getting memory access ++ * according to the fixed scheme that's the default when one ++ * of the slot-allocated clients doesn't claim their slot. ++ */ ++ if (total_assigned + req > NBR_OF_SLOTS) + return -ENOMEM; + + active_clients[region][client] = 1; + requested_slots[region][client] = req; +- crisv32_arbiter_config(region); ++ crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned); + + return 0; + } + ++/* ++ * Main entry for bandwidth deallocation. ++ * ++ * Strictly speaking, for a somewhat constant set of clients where ++ * each client gets a constant bandwidth and is just enabled or ++ * disabled (somewhat dynamically), no action is necessary here to ++ * avoid starvation for non-zero-allocation clients, as the allocated ++ * slots will just be unused. However, handing out those unused slots ++ * to active clients avoids needless latency if the "fixed scheme" ++ * would give unclaimed slots to an eager low-index client. ++ */ ++ ++void crisv32_arbiter_deallocate_bandwidth(int client, int region) ++{ ++ int i; ++ int total_assigned = 0; ++ ++ requested_slots[region][client] = 0; ++ active_clients[region][client] = 0; ++ ++ for (i = 0; i < NBR_OF_CLIENTS; i++) ++ total_assigned += requested_slots[region][i]; ++ ++ crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned); ++} ++ + int crisv32_arbiter_watch(unsigned long start, unsigned long size, + unsigned long clients, unsigned long accesses, + watch_callback* cb) + { + int i; +- ++ + crisv32_arbiter_init(); +- ++ + if (start > 0x80000000) { + printk("Arbiter: %lX doesn't look like a physical address", start); + return -EFAULT; + } + + spin_lock(&arbiter_lock); +- ++ + for (i = 0; i < NUMBER_OF_BP; i++) { + if (!watches[i].used) { + reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask); +@@ -214,7 +321,7 @@ + crisv32_arbiter_init(); + + spin_lock(&arbiter_lock); +- ++ + if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) { + spin_unlock(&arbiter_lock); + return -EINVAL; +@@ -239,7 +346,7 @@ + + extern void show_registers(struct pt_regs *regs); + +-static irqreturn_t ++static irqreturn_t + crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs) + { + reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr); +@@ -248,10 +355,10 @@ + reg_marb_bp_r_brk_op r_op; + reg_marb_bp_r_brk_first_client r_first; + reg_marb_bp_r_brk_size r_size; +- reg_marb_bp_rw_ack ack = {0}; ++ reg_marb_bp_rw_ack ack = {0}; + reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1}; + struct crisv32_watch_entry* watch; +- ++ + if (masked_intr.bp0) { + watch = &watches[0]; + ack_intr.bp0 = regk_marb_yes; +@@ -291,6 +398,6 @@ + if (watch->cb) + watch->cb(); + +- ++ + return IRQ_HANDLED; + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/asm-offsets.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/asm-offsets.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/asm-offsets.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/asm-offsets.c 2003-06-02 10:39:38.000000000 +0200 +@@ -16,8 +16,8 @@ + { + #define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry)) + ENTRY(orig_r10); +- ENTRY(r13); +- ENTRY(r12); ++ ENTRY(r13); ++ ENTRY(r12); + ENTRY(r11); + ENTRY(r10); + ENTRY(r9); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cache.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cache.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cache.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cache.c 2007-01-23 13:09:57.000000000 +0100 +@@ -0,0 +1,31 @@ ++#include <linux/module.h> ++#include <asm/io.h> ++#include <asm/arch/cache.h> ++#include <asm/arch/hwregs/dma.h> ++ ++// This file is used to workaround a cache bug, Guinness TR 106 ++ ++inline void flush_dma_descr(dma_descr_data* descr, int flush_buf) ++{ ++ // Flush descriptor to make sure we get correct in_eop and after ++ asm volatile ("ftagd [%0]" :: "r" (descr)); ++ // Flush buffer pointed out by descriptor ++ if (flush_buf) ++ cris_flush_cache_range(phys_to_virt((unsigned)descr->buf), (unsigned)(descr->after - descr->buf)); ++} ++ ++void flush_dma_list(dma_descr_data* descr) ++{ ++ while(1) ++ { ++ flush_dma_descr(descr, 1); ++ if (descr->eol) ++ break; ++ descr = phys_to_virt((unsigned)descr->next); ++ } ++} ++ ++EXPORT_SYMBOL(flush_dma_list); ++EXPORT_SYMBOL(flush_dma_descr); ++EXPORT_SYMBOL(cris_flush_cache); ++EXPORT_SYMBOL(cris_flush_cache_range); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cacheflush.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cacheflush.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cacheflush.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cacheflush.S 2006-12-06 14:17:02.000000000 +0100 +@@ -0,0 +1,93 @@ ++ .global cris_flush_cache_range ++cris_flush_cache_range: ++ move.d 1024, $r12 ++ cmp.d $r11, $r12 ++ bhi cris_flush_1KB ++ nop ++ add.d $r10, $r11 ++cris_flush_last: ++ addq 32, $r10 ++ cmp.d $r11, $r10 ++ blt cris_flush_last ++ ftagd [$r10] ++ ret ++ nop ++cris_flush_1KB: ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ftagd [$r10] ++ addq 32, $r10 ++ ba cris_flush_cache_range ++ sub.d $r12, $r11 ++ ++ .global cris_flush_cache ++cris_flush_cache: ++ moveq 0, $r10 ++cris_flush_line: ++ move.d 16*1024, $r11 ++ addq 16, $r10 ++ cmp.d $r10, $r11 ++ blt cris_flush_line ++ fidxd [$r10] ++ ret ++ nop +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cpufreq.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cpufreq.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cpufreq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cpufreq.c 2006-11-03 11:35:52.000000000 +0100 +@@ -0,0 +1,147 @@ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/cpufreq.h> ++#include <asm/arch/hwregs/reg_map.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/config_defs.h> ++#include <asm/arch/hwregs/bif_core_defs.h> ++ ++static int ++cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, void *data); ++ ++static struct notifier_block cris_sdram_freq_notifier_block = { ++ .notifier_call = cris_sdram_freq_notifier ++}; ++ ++static struct cpufreq_frequency_table cris_freq_table[] = { ++ {0x01, 6000}, ++ {0x02, 200000}, ++ {0, CPUFREQ_TABLE_END}, ++}; ++ ++static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu) ++{ ++ reg_config_rw_clk_ctrl clk_ctrl; ++ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); ++ return clk_ctrl.pll ? 200000 : 6000; ++} ++ ++static void cris_freq_set_cpu_state (unsigned int state) ++{ ++ int i; ++ struct cpufreq_freqs freqs; ++ reg_config_rw_clk_ctrl clk_ctrl; ++ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl); ++ ++ for_each_cpu(i) { ++ freqs.old = cris_freq_get_cpu_frequency(i); ++ freqs.new = cris_freq_table[state].frequency; ++ freqs.cpu = i; ++ } ++ ++ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); ++ ++ local_irq_disable(); ++ ++ // Even though we may be SMP they will share the same clock ++ // so all settings are made on CPU0. ++ if (cris_freq_table[state].frequency == 200000) ++ clk_ctrl.pll = 1; ++ else ++ clk_ctrl.pll = 0; ++ REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); ++ ++ local_irq_enable(); ++ ++ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); ++}; ++ ++static int cris_freq_verify (struct cpufreq_policy *policy) ++{ ++ return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]); ++} ++ ++static int cris_freq_target (struct cpufreq_policy *policy, ++ unsigned int target_freq, ++ unsigned int relation) ++{ ++ unsigned int newstate = 0; ++ ++ if (cpufreq_frequency_table_target(policy, cris_freq_table, target_freq, relation, &newstate)) ++ return -EINVAL; ++ ++ cris_freq_set_cpu_state(newstate); ++ ++ return 0; ++} ++ ++static int cris_freq_cpu_init(struct cpufreq_policy *policy) ++{ ++ int result; ++ ++ /* cpuinfo and default policy values */ ++ policy->governor = CPUFREQ_DEFAULT_GOVERNOR; ++ policy->cpuinfo.transition_latency = 1000000; /* 1ms */ ++ policy->cur = cris_freq_get_cpu_frequency(0); ++ ++ result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table); ++ if (result) ++ return (result); ++ ++ cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu); ++ ++ return 0; ++} ++ ++ ++static int cris_freq_cpu_exit(struct cpufreq_policy *policy) ++{ ++ cpufreq_frequency_table_put_attr(policy->cpu); ++ return 0; ++} ++ ++ ++static struct freq_attr* cris_freq_attr[] = { ++ &cpufreq_freq_attr_scaling_available_freqs, ++ NULL, ++}; ++ ++static struct cpufreq_driver cris_freq_driver = { ++ .get = cris_freq_get_cpu_frequency, ++ .verify = cris_freq_verify, ++ .target = cris_freq_target, ++ .init = cris_freq_cpu_init, ++ .exit = cris_freq_cpu_exit, ++ .name = "cris_freq", ++ .owner = THIS_MODULE, ++ .attr = cris_freq_attr, ++}; ++ ++static int __init cris_freq_init(void) ++{ ++ int ret; ++ ret = cpufreq_register_driver(&cris_freq_driver); ++ cpufreq_register_notifier(&cris_sdram_freq_notifier_block, ++ CPUFREQ_TRANSITION_NOTIFIER); ++ return ret; ++} ++ ++static int ++cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, void *data) ++{ ++ int i; ++ struct cpufreq_freqs *freqs = data; ++ if (val == CPUFREQ_PRECHANGE) { ++ reg_bif_core_rw_sdram_timing timing = ++ REG_RD(bif_core, regi_bif_core, rw_sdram_timing); ++ timing.cpd = (freqs->new == 200000 ? 0 : 1); ++ ++ if (freqs->new == 200000) ++ for (i = 0; i < 50000; i++); ++ REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing); ++ } ++ return 0; ++} ++ ++ ++module_init(cris_freq_init); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/crisksyms.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/crisksyms.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/crisksyms.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/crisksyms.c 2006-11-21 04:21:34.000000000 +0100 +@@ -3,6 +3,7 @@ + #include <asm/arch/dma.h> + #include <asm/arch/intmem.h> + #include <asm/arch/pinmux.h> ++#include <asm/arch/io.h> + + /* Functions for allocating DMA channels */ + EXPORT_SYMBOL(crisv32_request_dma); +@@ -16,7 +17,11 @@ + + /* Functions for handling pinmux */ + EXPORT_SYMBOL(crisv32_pinmux_alloc); ++EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed); + EXPORT_SYMBOL(crisv32_pinmux_dealloc); ++EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed); ++EXPORT_SYMBOL(crisv32_io_get_name); ++EXPORT_SYMBOL(crisv32_io_get); + + /* Functions masking/unmasking interrupts */ + EXPORT_SYMBOL(mask_irq); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/debugport.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/debugport.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/debugport.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/debugport.c 2006-10-13 14:43:13.000000000 +0200 +@@ -4,18 +4,13 @@ + + #include <linux/console.h> + #include <linux/init.h> +-#include <linux/major.h> +-#include <linux/delay.h> +-#include <linux/tty.h> + #include <asm/system.h> +-#include <asm/io.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/reg_map.h> + #include <asm/arch/hwregs/ser_defs.h> + #include <asm/arch/hwregs/dma_defs.h> + #include <asm/arch/pinmux.h> + +-#include <asm/irq.h> +-#include <asm/arch/hwregs/intr_vect_defs.h> +- + struct dbg_port + { + unsigned char nbr; +@@ -26,7 +21,7 @@ + unsigned int bits; + }; + +-struct dbg_port ports[] = ++struct dbg_port ports[] = + { + { + 0, +@@ -89,15 +84,6 @@ + #endif + #endif + +-#ifdef CONFIG_ETRAXFS_SIM +-extern void print_str( const char *str ); +-static char buffer[1024]; +-static char msg[] = "Debug: "; +-static int buffer_pos = sizeof(msg) - 1; +-#endif +- +-extern struct tty_driver *serial_driver; +- + static void + start_port(struct dbg_port* p) + { +@@ -118,7 +104,7 @@ + /* Set up serial port registers */ + reg_ser_rw_tr_ctrl tr_ctrl = {0}; + reg_ser_rw_tr_dma_en tr_dma_en = {0}; +- ++ + reg_ser_rw_rec_ctrl rec_ctrl = {0}; + reg_ser_rw_tr_baud_div tr_baud_div = {0}; + reg_ser_rw_rec_baud_div rec_baud_div = {0}; +@@ -148,6 +134,7 @@ + tr_ctrl.data_bits = regk_ser_bits7; + rec_ctrl.data_bits = regk_ser_bits7; + } ++ + + REG_WR (ser, p->instance, rw_tr_baud_div, tr_baud_div); + REG_WR (ser, p->instance, rw_rec_baud_div, rec_baud_div); +@@ -156,124 +143,21 @@ + REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl); + } + +-/* No debug */ +-#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL +- +-static void +-console_write(struct console *co, const char *buf, unsigned int len) +-{ +- return; +-} +- +-/* Target debug */ +-#elif !defined(CONFIG_ETRAXFS_SIM) +- +-static void +-console_write_direct(struct console *co, const char *buf, unsigned int len) +-{ +- int i; +- reg_ser_r_stat_din stat; +- reg_ser_rw_tr_dma_en tr_dma_en, old; +- +- /* Switch to manual mode */ +- tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en); +- if (tr_dma_en.en == regk_ser_yes) { +- tr_dma_en.en = regk_ser_no; +- REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en); +- } +- +- /* Send data */ +- for (i = 0; i < len; i++) { +- /* LF -> CRLF */ +- if (buf[i] == '\n') { +- do { +- stat = REG_RD (ser, port->instance, r_stat_din); +- } while (!stat.tr_rdy); +- REG_WR_INT (ser, port->instance, rw_dout, '\r'); +- } +- /* Wait until transmitter is ready and send.*/ +- do { +- stat = REG_RD (ser, port->instance, r_stat_din); +- } while (!stat.tr_rdy); +- REG_WR_INT (ser, port->instance, rw_dout, buf[i]); +- } +- +- /* Restore mode */ +- if (tr_dma_en.en != old.en) +- REG_WR(ser, port->instance, rw_tr_dma_en, old); +-} +- +-static void +-console_write(struct console *co, const char *buf, unsigned int len) +-{ +- if (!port) +- return; +- console_write_direct(co, buf, len); +-} +- +- +- +-#else +- +-/* VCS debug */ +- +-static void +-console_write(struct console *co, const char *buf, unsigned int len) +-{ +- char* pos; +- pos = memchr(buf, '\n', len); +- if (pos) { +- int l = ++pos - buf; +- memcpy(buffer + buffer_pos, buf, l); +- memcpy(buffer, msg, sizeof(msg) - 1); +- buffer[buffer_pos + l] = '\0'; +- print_str(buffer); +- buffer_pos = sizeof(msg) - 1; +- if (pos - buf != len) { +- memcpy(buffer + buffer_pos, pos, len - l); +- buffer_pos += len - l; +- } +- } else { +- memcpy(buffer + buffer_pos, buf, len); +- buffer_pos += len; +- } +-} +- +-#endif +- +-int raw_printk(const char *fmt, ...) +-{ +- static char buf[1024]; +- int printed_len; +- va_list args; +- va_start(args, fmt); +- printed_len = vsnprintf(buf, sizeof(buf), fmt, args); +- va_end(args); +- console_write(NULL, buf, strlen(buf)); +- return printed_len; +-} +- +-void +-stupid_debug(char* buf) +-{ +- console_write(NULL, buf, strlen(buf)); +-} +- + #ifdef CONFIG_ETRAX_KGDB + /* Use polling to get a single character from the kernel debug port */ + int + getDebugChar(void) + { +- reg_ser_rs_status_data stat; ++ reg_ser_rs_stat_din stat; + reg_ser_rw_ack_intr ack_intr = { 0 }; + + do { +- stat = REG_RD(ser, kgdb_instance, rs_status_data); +- } while (!stat.data_avail); ++ stat = REG_RD(ser, kgdb_port->instance, rs_stat_din); ++ } while (!stat.dav); + + /* Ack the data_avail interrupt. */ +- ack_intr.data_avail = 1; +- REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr); ++ ack_intr.dav = 1; ++ REG_WR(ser, kgdb_port->instance, rw_ack_intr, ack_intr); + + return stat.data; + } +@@ -282,173 +166,18 @@ + void + putDebugChar(int val) + { +- reg_ser_r_status_data stat; ++ reg_ser_r_stat_din stat; + do { +- stat = REG_RD (ser, kgdb_instance, r_status_data); +- } while (!stat.tr_ready); +- REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val)); ++ stat = REG_RD (ser, kgdb_port->instance, r_stat_din); ++ } while (!stat.tr_rdy); ++ REG_WR_INT (ser, kgdb_port->instance, rw_dout, val); + } + #endif /* CONFIG_ETRAX_KGDB */ + +-static int __init +-console_setup(struct console *co, char *options) +-{ +- char* s; +- +- if (options) { +- port = &ports[co->index]; +- port->baudrate = 115200; +- port->parity = 'N'; +- port->bits = 8; +- port->baudrate = simple_strtoul(options, NULL, 10); +- s = options; +- while(*s >= '0' && *s <= '9') +- s++; +- if (*s) port->parity = *s++; +- if (*s) port->bits = *s++ - '0'; +- port->started = 0; +- start_port(port); +- } +- return 0; +-} +- +-/* This is a dummy serial device that throws away anything written to it. +- * This is used when no debug output is wanted. +- */ +-static struct tty_driver dummy_driver; +- +-static int dummy_open(struct tty_struct *tty, struct file * filp) +-{ +- return 0; +-} +- +-static void dummy_close(struct tty_struct *tty, struct file * filp) +-{ +-} +- +-static int dummy_write(struct tty_struct * tty, +- const unsigned char *buf, int count) +-{ +- return count; +-} +- +-static int +-dummy_write_room(struct tty_struct *tty) +-{ +- return 8192; +-} +- +-void __init +-init_dummy_console(void) +-{ +- memset(&dummy_driver, 0, sizeof(struct tty_driver)); +- dummy_driver.driver_name = "serial"; +- dummy_driver.name = "ttyS"; +- dummy_driver.major = TTY_MAJOR; +- dummy_driver.minor_start = 68; +- dummy_driver.num = 1; /* etrax100 has 4 serial ports */ +- dummy_driver.type = TTY_DRIVER_TYPE_SERIAL; +- dummy_driver.subtype = SERIAL_TYPE_NORMAL; +- dummy_driver.init_termios = tty_std_termios; +- dummy_driver.init_termios.c_cflag = +- B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */ +- dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; +- +- dummy_driver.open = dummy_open; +- dummy_driver.close = dummy_close; +- dummy_driver.write = dummy_write; +- dummy_driver.write_room = dummy_write_room; +- if (tty_register_driver(&dummy_driver)) +- panic("Couldn't register dummy serial driver\n"); +-} +- +-static struct tty_driver* +-crisv32_console_device(struct console* co, int *index) +-{ +- if (port) +- *index = port->nbr; +- return port ? serial_driver : &dummy_driver; +-} +- +-static struct console sercons = { +- name : "ttyS", +- write: console_write, +- read : NULL, +- device : crisv32_console_device, +- unblank : NULL, +- setup : console_setup, +- flags : CON_PRINTBUFFER, +- index : -1, +- cflag : 0, +- next : NULL +-}; +-static struct console sercons0 = { +- name : "ttyS", +- write: console_write, +- read : NULL, +- device : crisv32_console_device, +- unblank : NULL, +- setup : console_setup, +- flags : CON_PRINTBUFFER, +- index : 0, +- cflag : 0, +- next : NULL +-}; +- +-static struct console sercons1 = { +- name : "ttyS", +- write: console_write, +- read : NULL, +- device : crisv32_console_device, +- unblank : NULL, +- setup : console_setup, +- flags : CON_PRINTBUFFER, +- index : 1, +- cflag : 0, +- next : NULL +-}; +-static struct console sercons2 = { +- name : "ttyS", +- write: console_write, +- read : NULL, +- device : crisv32_console_device, +- unblank : NULL, +- setup : console_setup, +- flags : CON_PRINTBUFFER, +- index : 2, +- cflag : 0, +- next : NULL +-}; +-static struct console sercons3 = { +- name : "ttyS", +- write: console_write, +- read : NULL, +- device : crisv32_console_device, +- unblank : NULL, +- setup : console_setup, +- flags : CON_PRINTBUFFER, +- index : 3, +- cflag : 0, +- next : NULL +-}; +- + /* Register console for printk's, etc. */ + int __init + init_etrax_debug(void) + { +- static int first = 1; +- +- if (!first) { +- unregister_console(&sercons); +- register_console(&sercons0); +- register_console(&sercons1); +- register_console(&sercons2); +- register_console(&sercons3); +- init_dummy_console(); +- return 0; +- } +- first = 0; +- register_console(&sercons); + start_port(port); + + #ifdef CONFIG_ETRAX_KGDB +@@ -456,5 +185,3 @@ + #endif /* CONFIG_ETRAX_KGDB */ + return 0; + } +- +-__initcall(init_etrax_debug); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/dma.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/dma.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/dma.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/dma.c 2007-02-02 08:45:22.000000000 +0100 +@@ -12,6 +12,16 @@ + #include <asm/system.h> + #include <asm/arch/arbiter.h> + ++/* ++ * The memory region we allocated bandwidth for is stored in ++ * used_dma_channels as an in-use flag. ++ */ ++enum dma_region_allocated_marker { ++ DMA_NO_REGION_ALLOCATED = 0, ++ DMA_INT_REGION_ALLOCATED = 1, ++ DMA_EXT_REGION_ALLOCATED = 2 ++}; ++ + static char used_dma_channels[MAX_DMA_CHANNELS]; + static const char * used_dma_channels_users[MAX_DMA_CHANNELS]; + +@@ -74,7 +84,7 @@ + if (options & DMA_VERBOSE_ON_ERROR) { + printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1); + } +- ++ + if (options & DMA_PANIC_ON_ERROR) + panic("request_dma error!"); + return -EINVAL; +@@ -202,13 +212,14 @@ + if (dmanr == 3) + strmux_cfg.dma3 = regk_strmux_ext3; + else if (dmanr == 9) +- strmux_cfg.dma9 = regk_strmux_ext2; ++ strmux_cfg.dma9 = regk_strmux_ext3; + else +- panic("Invalid DMA channel for ext2\n"); ++ panic("Invalid DMA channel for ext3\n"); + break; + } + +- used_dma_channels[dmanr] = 1; ++ used_dma_channels[dmanr] = options & DMA_INT_MEM ++ ? DMA_INT_REGION_ALLOCATED : DMA_EXT_REGION_ALLOCATED; + used_dma_channels_users[dmanr] = device_id; + REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl); + REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg); +@@ -218,7 +229,12 @@ + + void crisv32_free_dma(unsigned int dmanr) + { ++ int region; ++ + spin_lock(&dma_lock); ++ region = used_dma_channels[dmanr] == DMA_INT_REGION_ALLOCATED ++ ? INT_REGION : EXT_REGION; + used_dma_channels[dmanr] = 0; ++ crisv32_arbiter_deallocate_bandwidth(dmanr, region); + spin_unlock(&dma_lock); + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/entry.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/entry.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/entry.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/entry.S 2007-01-09 10:29:19.000000000 +0100 +@@ -11,7 +11,7 @@ + * + * Stack layout in 'ret_from_system_call': + * ptrace needs to have all regs on the stack. +- * if the order here is changed, it needs to be ++ * if the order here is changed, it needs to be + * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace.c and ptrace.h + * +@@ -40,7 +40,7 @@ + .globl sys_call_table + + ; Check if preemptive kernel scheduling should be done. +-#ifdef CONFIG_PREEMPT ++#ifdef CONFIG_PREEMPT + _resume_kernel: + di + ; Load current task struct. +@@ -81,7 +81,7 @@ + nop + ba ret_from_sys_call + nop +- ++ + ret_from_intr: + ;; Check for resched if preemptive kernel, or if we're going back to + ;; user-mode. This test matches the user_regs(regs) macro. Don't simply +@@ -93,7 +93,7 @@ + bpl _resume_kernel + + ; Note that di below is in delay slot. +- ++ + _resume_userspace: + di ; So need_resched and sigpending don't change. + +@@ -107,19 +107,19 @@ + nop + ba _Rexit + nop +- ++ + ;; The system_call is called by a BREAK instruction, which looks pretty + ;; much like any other exception. + ;; + ;; System calls can't be made from interrupts but we still stack ERP + ;; to have a complete stack frame. +- ;; ++ ;; + ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12, + ;; r13,mof,srp + ;; + ;; This function looks on the _surface_ like spaghetti programming, but it's +- ;; really designed so that the fast-path does not force cache-loading of +- ;; non-used instructions. Only the non-common cases cause the outlined code ++ ;; really designed so that the fast-path does not force cache-loading of ++ ;; non-used instructions. Only the non-common cases cause the outlined code + ;; to run.. + + system_call: +@@ -151,7 +151,7 @@ + or.d (1<<9), $r0 + move $r0, $ccs + #endif +- ++ + movs.w -ENOSYS, $r0 + addoq +PT_r10, $sp, $acr + move.d $r0, [$acr] +@@ -166,9 +166,9 @@ + bmi _syscall_trace_entry + nop + +-_syscall_traced: ++_syscall_traced: + ;; Check for sanity in the requested syscall number. +- cmpu.w NR_syscalls, $r9 ++ cmpu.w NR_syscalls, $r9 + bhs ret_from_sys_call + lslq 2, $r9 ; Multiply by 4, in the delay slot. + +@@ -177,7 +177,7 @@ + move.d $sp, $r0 + subq 4, $sp + move.d $r0, [$sp] +- ++ + ;; The registers carrying parameters (R10-R13) are intact. The optional + ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them + ;; back on the stack. +@@ -185,33 +185,33 @@ + move $srp, [$sp] + subq 4, $sp + move $mof, [$sp] +- ++ + ;; Actually to the system call. + addo.d +sys_call_table, $r9, $acr + move.d [$acr], $acr + jsr $acr + nop +- ++ + addq 3*4, $sp ; Pop the mof, srp and regs parameters. + addoq +PT_r10, $sp, $acr + move.d $r10, [$acr] ; Save the return value. + +- moveq 1, $r9 ; "Parameter" to ret_from_sys_call to ++ moveq 1, $r9 ; "Parameter" to ret_from_sys_call to + ; show it was a sys call. +- ++ + ;; Fall through into ret_from_sys_call to return. +- ++ + ret_from_sys_call: + ;; R9 is a parameter: + ;; >= 1 from syscall + ;; 0 from irq +- ++ + ;; Get the current task-struct pointer. +- movs.w -8192, $r0 ; THREAD_SIZE == 8192 ++ movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + di ; Make sure need_resched and sigpending don't change. +- ++ + addoq +TI_flags, $r0, $acr + move.d [$acr], $r1 + and.d _TIF_ALLWORK_MASK, $r1 +@@ -253,14 +253,14 @@ + move.d $r1, $r9 + ba _resume_userspace + nop +- ++ + _work_pending: + addoq +TI_flags, $r0, $acr + move.d [$acr], $r10 + btstq TIF_NEED_RESCHED, $r10 ; Need resched? + bpl _work_notifysig ; No, must be signal/notify. + nop +- ++ + _work_resched: + move.d $r9, $r1 ; Preserve R9. + jsr schedule +@@ -281,28 +281,26 @@ + ;; Deal with pending signals and notify-resume requests. + + addoq +TI_flags, $r0, $acr +- move.d [$acr], $r13 ; The thread_info_flags parameter. +- move.d $r9, $r10 ; do_notify_resume syscall/irq param. +- moveq 0, $r11 ; oldset param - 0 in this case. +- move.d $sp, $r12 ; The regs param. ++ move.d [$acr], $r12 ; The thread_info_flags parameter. ++ move.d $sp, $r11 ; The regs param. + jsr do_notify_resume +- nop +- ++ move.d $r9, $r10 ; do_notify_resume syscall/irq param. ++ + ba _Rexit + nop + + ;; We get here as a sidetrack when we've entered a syscall with the + ;; trace-bit set. We need to call do_syscall_trace and then continue + ;; with the call. +- ++ + _syscall_trace_entry: + ;; PT_r10 in the frame contains -ENOSYS as required, at this point. +- ++ + jsr do_syscall_trace + nop + + ;; Now re-enter the syscall code to do the syscall itself. We need to +- ;; restore R9 here to contain the wanted syscall, and the other ++ ;; restore R9 here to contain the wanted syscall, and the other + ;; parameter-bearing registers. + addoq +PT_r9, $sp, $acr + move.d [$acr], $r9 +@@ -318,10 +316,10 @@ + move [$acr], $mof + addoq +PT_srp, $sp, $acr + move [$acr], $srp +- ++ + ba _syscall_traced + nop +- ++ + ;; Resume performs the actual task-switching, by switching stack + ;; pointers. Input arguments are: + ;; +@@ -331,7 +329,7 @@ + ;; + ;; Returns old current in R10. + +-resume: ++resume: + subq 4, $sp + move $srp, [$sp] ; Keep old/new PC on the stack. + add.d $r12, $r10 ; R10 = current tasks tss. +@@ -341,14 +339,14 @@ + + addoq +THREAD_usp, $r10, $acr + move $usp, [$acr] ; Save user-mode stackpointer. +- ++ + ;; See copy_thread for the reason why register R9 is saved. + subq 10*4, $sp + movem $r9, [$sp] ; Save non-scratch registers and R9. +- ++ + addoq +THREAD_ksp, $r10, $acr + move.d $sp, [$acr] ; Save kernel SP for old task. +- ++ + move.d $sp, $r10 ; Return last running task in R10. + and.d -8192, $r10 ; Get thread_info from stackpointer. + addoq +TI_task, $r10, $acr +@@ -360,7 +358,7 @@ + + addoq +THREAD_usp, $r11, $acr + move [$acr], $usp ; Restore user-mode stackpointer. +- ++ + addoq +THREAD_ccs, $r11, $acr + move [$acr], $ccs ; Restore IRQ enable status. + move.d [$sp+], $acr +@@ -407,7 +405,7 @@ + movem [$sp+], $r13 + move.d [$sp+], $acr + move [$sp], $srs +- addq 4, $sp ++ addq 4, $sp + move [$sp+], $mof + move [$sp+], $spc + move [$sp+], $ccs +@@ -419,7 +417,7 @@ + + .comm cause_of_death, 4 ;; Don't declare this anywhere. + +-spurious_interrupt: ++spurious_interrupt: + di + jump hard_reset_now + nop +@@ -494,31 +492,38 @@ + ;; thread_info as first parameter + move.d $r9, $r10 + moveq 5, $r11 ; SIGTRAP as second argument. +- jsr ugdb_trap_user ++ jsr ugdb_trap_user + nop + jump ret_from_intr ; Use the return routine for interrupts. + nop +- +-gdb_handle_exception: ++ ++gdb_handle_exception: + subq 4, $sp + move.d $r0, [$sp] + #ifdef CONFIG_ETRAX_KGDB +- move $ccs, $r0 ; U-flag not affected by previous insns. ++ move $ccs, $r0 ; U-flag not affected by previous insns. + btstq 16, $r0 ; Test the U-flag. +- bmi _ugdb_handle_exception ; Go to user mode debugging. +- nop ; Empty delay-slot (cannot pop R0 here). ++ bmi _ugdb_handle_exception ; Go to user mode debugging. ++ nop ; Empty delay-slot (cannot pop R0 here). + ba kgdb_handle_exception ; Go to kernel debugging. + move.d [$sp+], $r0 ; Restore R0 in delay slot. + #endif +- ++ + _ugdb_handle_exception: + ba do_sigtrap ; SIGTRAP the offending process. + move.d [$sp+], $r0 ; Restore R0 in delay slot. + ++ .global kernel_execve ++kernel_execve: ++ move.d __NR_execve, $r9 ++ break 13 ++ ret ++ nop ++ + .data + + .section .rodata,"a" +-sys_call_table: ++sys_call_table: + .long sys_restart_syscall ; 0 - old "setup()" system call, used + ; for restarting. + .long sys_exit +@@ -647,7 +652,7 @@ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask +- .long sys_ni_syscall /* old "create_module" */ ++ .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ +@@ -789,7 +794,7 @@ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 +- .long sys_fstatfs64 ++ .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 +@@ -805,7 +810,43 @@ + .long sys_mq_getsetattr + .long sys_ni_syscall /* reserved for kexec */ + .long sys_waitid +- ++ .long sys_ni_syscall /* 285 */ /* available */ ++ .long sys_add_key ++ .long sys_request_key ++ .long sys_keyctl ++ .long sys_ioprio_set ++ .long sys_ioprio_get /* 290 */ ++ .long sys_inotify_init ++ .long sys_inotify_add_watch ++ .long sys_inotify_rm_watch ++ .long sys_migrate_pages ++ .long sys_openat /* 295 */ ++ .long sys_mkdirat ++ .long sys_mknodat ++ .long sys_fchownat ++ .long sys_futimesat ++ .long sys_fstatat64 /* 300 */ ++ .long sys_unlinkat ++ .long sys_renameat ++ .long sys_linkat ++ .long sys_symlinkat ++ .long sys_readlinkat /* 305 */ ++ .long sys_fchmodat ++ .long sys_faccessat ++ .long sys_pselect6 ++ .long sys_ppoll ++ .long sys_unshare /* 310 */ ++ .long sys_set_robust_list ++ .long sys_set_robust_list ++ .long sys_get_robust_list ++ .long sys_splice ++ .long sys_sync_file_range ++ .long sys_tee /* 315 */ ++ .long sys_vmsplice ++ .long sys_move_pages ++ .long sys_getcpu ++ .long sys_epoll_pwait ++ + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" +@@ -816,4 +857,4 @@ + .rept NR_syscalls - (.-sys_call_table) / 4 + .long sys_ni_syscall + .endr +- ++ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/fasttimer.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/fasttimer.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/fasttimer.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/fasttimer.c 2007-01-09 10:29:19.000000000 +0100 +@@ -1,110 +1,10 @@ +-/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $ ++/* + * linux/arch/cris/kernel/fasttimer.c + * + * Fast timers for ETRAX FS + * This may be useful in other OS than Linux so use 2 space indentation... + * +- * $Log: fasttimer.c,v $ +- * Revision 1.11 2005/01/04 11:15:46 starvik +- * Don't share timer IRQ. +- * +- * Revision 1.10 2004/12/07 09:19:38 starvik +- * Corrected includes. +- * Use correct interrupt macros. +- * +- * Revision 1.9 2004/05/14 10:18:58 starvik +- * Export fast_timer_list +- * +- * Revision 1.8 2004/05/14 07:58:03 starvik +- * Merge of changes from 2.4 +- * +- * Revision 1.7 2003/07/10 12:06:14 starvik +- * Return IRQ_NONE if irq wasn't handled +- * +- * Revision 1.6 2003/07/04 08:27:49 starvik +- * Merge of Linux 2.5.74 +- * +- * Revision 1.5 2003/06/05 10:16:22 johana +- * New INTR_VECT macros. +- * +- * Revision 1.4 2003/06/03 08:49:45 johana +- * Fixed typo. +- * +- * Revision 1.3 2003/06/02 12:51:27 johana +- * Now compiles. +- * Commented some include files that probably can be removed. +- * +- * Revision 1.2 2003/06/02 12:09:41 johana +- * Ported to ETRAX FS using the trig interrupt instead of timer1. +- * +- * Revision 1.3 2002/12/12 08:26:32 starvik +- * Don't use C-comments inside CVS comments +- * +- * Revision 1.2 2002/12/11 15:42:02 starvik +- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/ +- * +- * Revision 1.1 2002/11/18 07:58:06 starvik +- * Fast timers (from Linux 2.4) +- * +- * Revision 1.5 2002/10/15 06:21:39 starvik +- * Added call to init_waitqueue_head +- * +- * Revision 1.4 2002/05/28 17:47:59 johana +- * Added del_fast_timer() +- * +- * Revision 1.3 2002/05/28 16:16:07 johana +- * Handle empty fast_timer_list +- * +- * Revision 1.2 2002/05/27 15:38:42 johana +- * Made it compile without warnings on Linux 2.4. +- * (includes, wait_queue, PROC_FS and snprintf) +- * +- * Revision 1.1 2002/05/27 15:32:25 johana +- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree. +- * +- * Revision 1.8 2001/11/27 13:50:40 pkj +- * Disable interrupts while stopping the timer and while modifying the +- * list of active timers in timer1_handler() as it may be interrupted +- * by other interrupts (e.g., the serial interrupt) which may add fast +- * timers. +- * +- * Revision 1.7 2001/11/22 11:50:32 pkj +- * * Only store information about the last 16 timers. +- * * proc_fasttimer_read() now uses an allocated buffer, since it +- * requires more space than just a page even for only writing the +- * last 16 timers. The buffer is only allocated on request, so +- * unless /proc/fasttimer is read, it is never allocated. +- * * Renamed fast_timer_started to fast_timers_started to match +- * fast_timers_added and fast_timers_expired. +- * * Some clean-up. +- * +- * Revision 1.6 2000/12/13 14:02:08 johana +- * Removed volatile for fast_timer_list +- * +- * Revision 1.5 2000/12/13 13:55:35 johana +- * Added DEBUG_LOG, added som cli() and cleanup +- * +- * Revision 1.4 2000/12/05 13:48:50 johana +- * Added range check when writing proc file, modified timer int handling +- * +- * Revision 1.3 2000/11/23 10:10:20 johana +- * More debug/logging possibilities. +- * Moved GET_JIFFIES_USEC() to timex.h and time.c +- * +- * Revision 1.2 2000/11/01 13:41:04 johana +- * Clean up and bugfixes. +- * Created new do_gettimeofday_fast() that gets a timeval struct +- * with time based on jiffies and *R_TIMER0_DATA, uses a table +- * for fast conversion of timer value to microseconds. +- * (Much faster the standard do_gettimeofday() and we don't really +- * wan't to use the true time - we wan't the "uptime" so timers don't screw up +- * when we change the time. +- * TODO: Add efficient support for continuous timers as well. +- * +- * Revision 1.1 2000/10/26 15:49:16 johana +- * Added fasttimer, highresolution timers. +- * +- * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden ++ * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden + */ + + #include <linux/errno.h> +@@ -128,13 +28,13 @@ + #include <asm/fasttimer.h> + #include <linux/proc_fs.h> + +-/* +- * timer0 is running at 100MHz and generating jiffies timer ticks ++/* ++ * timer0 is running at 100MHz and generating jiffies timer ticks + * at 100 or 1000 HZ. + * fasttimer gives an API that gives timers that expire "between" the jiffies + * giving microsecond resolution (10 ns). + * fasttimer uses reg_timer_rw_trig register to get interrupt when +- * r_time reaches a certain value. ++ * r_time reaches a certain value. + */ + + +@@ -151,19 +51,19 @@ + #define SANITYCHECK(x) + #endif + +-#define D1(x) +-#define D2(x) +-#define DP(x) ++#define D1(x) ++#define D2(x) ++#define DP(x) + + #define __INLINE__ inline + +-static int fast_timer_running = 0; +-static int fast_timers_added = 0; +-static int fast_timers_started = 0; +-static int fast_timers_expired = 0; +-static int fast_timers_deleted = 0; +-static int fast_timer_is_init = 0; +-static int fast_timer_ints = 0; ++static unsigned int fast_timer_running = 0; ++static unsigned int fast_timers_added = 0; ++static unsigned int fast_timers_started = 0; ++static unsigned int fast_timers_expired = 0; ++static unsigned int fast_timers_deleted = 0; ++static unsigned int fast_timer_is_init = 0; ++static unsigned int fast_timer_ints = 0; + + struct fast_timer *fast_timer_list = NULL; + +@@ -171,8 +71,8 @@ + #define DEBUG_LOG_MAX 128 + static const char * debug_log_string[DEBUG_LOG_MAX]; + static unsigned long debug_log_value[DEBUG_LOG_MAX]; +-static int debug_log_cnt = 0; +-static int debug_log_cnt_wrapped = 0; ++static unsigned int debug_log_cnt = 0; ++static unsigned int debug_log_cnt_wrapped = 0; + + #define DEBUG_LOG(string, value) \ + { \ +@@ -202,48 +102,33 @@ + int timer_div_settings[NUM_TIMER_STATS]; + int timer_delay_settings[NUM_TIMER_STATS]; + ++struct work_struct fast_work; + + static void +-timer_trig_handler(void); ++timer_trig_handler(void* dummy); + + + + /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */ +-void __INLINE__ do_gettimeofday_fast(struct timeval *tv) ++void __INLINE__ do_gettimeofday_fast(struct fasttime_t *tv) + { +- unsigned long sec = jiffies; +- unsigned long usec = GET_JIFFIES_USEC(); +- +- usec += (sec % HZ) * (1000000 / HZ); +- sec = sec / HZ; +- +- if (usec > 1000000) +- { +- usec -= 1000000; +- sec++; +- } +- tv->tv_sec = sec; +- tv->tv_usec = usec; ++ tv->tv_jiff = jiffies; ++ tv->tv_usec = GET_JIFFIES_USEC(); + } + +-int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1) ++int __INLINE__ timeval_cmp(struct fasttime_t *t0, struct fasttime_t *t1) + { +- if (t0->tv_sec < t1->tv_sec) +- { ++ /* Compare jiffies. Takes care of wrapping */ ++ if (time_before(t0->tv_jiff, t1->tv_jiff)) + return -1; +- } +- else if (t0->tv_sec > t1->tv_sec) +- { ++ else if (time_after(t0->tv_jiff, t1->tv_jiff)) + return 1; +- } ++ ++ /* Compare us */ + if (t0->tv_usec < t1->tv_usec) +- { + return -1; +- } + else if (t0->tv_usec > t1->tv_usec) +- { + return 1; +- } + return 0; + } + +@@ -254,20 +139,23 @@ + reg_timer_rw_intr_mask intr_mask; + reg_timer_rw_trig trig; + reg_timer_rw_trig_cfg trig_cfg = { 0 }; +- reg_timer_r_time r_time; +- +- r_time = REG_RD(timer, regi_timer, r_time); ++ reg_timer_r_time r_time0; ++ reg_timer_r_time r_time1; ++ unsigned char trig_wrap; ++ unsigned char time_wrap; + ++ r_time0 = REG_RD(timer, regi_timer, r_time); ++ + D1(printk("start_timer_trig : %d us freq: %i div: %i\n", + delay_us, freq_index, div)); + /* Clear trig irq */ + intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask.trig = 0; + REG_WR(timer, regi_timer, rw_intr_mask, intr_mask); +- +- /* Set timer values */ ++ ++ /* Set timer values and check if trigger wraps. */ + /* r_time is 100MHz (10 ns resolution) */ +- trig = r_time + delay_us*(1000/10); ++ trig_wrap = (trig = r_time0 + delay_us*(1000/10)) < r_time0; + + timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig; + timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us; +@@ -275,15 +163,17 @@ + /* Ack interrupt */ + ack_intr.trig = 1; + REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); +- ++ + /* Start timer */ + REG_WR(timer, regi_timer, rw_trig, trig); + trig_cfg.tmr = regk_timer_time; + REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + + /* Check if we have already passed the trig time */ +- r_time = REG_RD(timer, regi_timer, r_time); +- if (r_time < trig) { ++ r_time1 = REG_RD(timer, regi_timer, r_time); ++ time_wrap = r_time1 < r_time0; ++ ++ if ((trig_wrap && !time_wrap) || (r_time1 < trig)) { + /* No, Enable trig irq */ + intr_mask = REG_RD(timer, regi_timer, rw_intr_mask); + intr_mask.trig = 1; +@@ -291,16 +181,17 @@ + fast_timers_started++; + fast_timer_running = 1; + } +- else ++ else + { + /* We have passed the time, disable trig point, ack intr */ + trig_cfg.tmr = regk_timer_off; + REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg); + REG_WR(timer, regi_timer, rw_ack_intr, ack_intr); +- /* call the int routine directly */ +- timer_trig_handler(); ++ /* call the int routine */ ++ INIT_WORK(&fast_work, timer_trig_handler, (void*)NULL); ++ schedule_work(&fast_work); + } +- ++ + } + + /* In version 1.4 this function takes 27 - 50 us */ +@@ -327,7 +218,7 @@ + { + printk("timer name: %s data: 0x%08lX already in list!\n", name, data); + sanity_failed++; +- return; ++ goto done; + } + else + { +@@ -343,11 +234,11 @@ + t->name = name; + + t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000; +- t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000; ++ t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ; + if (t->tv_expires.tv_usec > 1000000) + { + t->tv_expires.tv_usec -= 1000000; +- t->tv_expires.tv_sec++; ++ t->tv_expires.tv_jiff += HZ; + } + #ifdef FAST_TIMER_LOG + timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t; +@@ -388,6 +279,7 @@ + + D2(printk("start_one_shot_timer: %d us done\n", delay_us)); + ++done: + local_irq_restore(flags); + } /* start_one_shot_timer */ + +@@ -431,26 +323,32 @@ + /* Timer interrupt handler for trig interrupts */ + + static irqreturn_t +-timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++timer_trig_interrupt(int irq, void *dev_id) + { + reg_timer_r_masked_intr masked_intr; +- + /* Check if the timer interrupt is for us (a trig int) */ + masked_intr = REG_RD(timer, regi_timer, r_masked_intr); + if (!masked_intr.trig) + return IRQ_NONE; +- timer_trig_handler(); ++ timer_trig_handler(NULL); + return IRQ_HANDLED; + } + +-static void timer_trig_handler(void) ++static void timer_trig_handler(void* dummy) + { + reg_timer_rw_ack_intr ack_intr = { 0 }; + reg_timer_rw_intr_mask intr_mask; + reg_timer_rw_trig_cfg trig_cfg = { 0 }; + struct fast_timer *t; +- unsigned long flags; ++ unsigned long flags; + ++ /* We keep interrupts disabled not only when we modify the ++ * fast timer list, but any time we hold a reference to a ++ * timer in the list, since del_fast_timer may be called ++ * from (another) interrupt context. Thus, the only time ++ * when interrupts are enabled is when calling the timer ++ * callback function. ++ */ + local_irq_save(flags); + + /* Clear timer trig interrupt */ +@@ -470,16 +368,17 @@ + fast_timer_running = 0; + fast_timer_ints++; + +- local_irq_restore(flags); ++ fast_timer_function_type *f; ++ unsigned long d; + + t = fast_timer_list; + while (t) + { +- struct timeval tv; ++ struct fasttime_t tv; + + /* Has it really expired? */ + do_gettimeofday_fast(&tv); +- D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec)); ++ D1(printk("t: %is %06ius\n", tv.tv_jiff, tv.tv_usec)); + + if (timeval_cmp(&t->tv_expires, &tv) <= 0) + { +@@ -490,7 +389,6 @@ + fast_timers_expired++; + + /* Remove this timer before call, since it may reuse the timer */ +- local_irq_save(flags); + if (t->prev) + { + t->prev->next = t->next; +@@ -505,11 +403,21 @@ + } + t->prev = NULL; + t->next = NULL; +- local_irq_restore(flags); + +- if (t->function != NULL) ++ /* Save function callback data before enabling interrupts, ++ * since the timer may be removed and we don't know how it ++ * was allocated (e.g. ->function and ->data may become ++ * overwritten after deletion if the timer was stack-allocated). ++ */ ++ f = t->function; ++ d = t->data; ++ ++ if (f != NULL) + { +- t->function(t->data); ++ /* Run the callback function with interrupts enabled. */ ++ local_irq_restore(flags); ++ f(d); ++ local_irq_save(flags); + } + else + { +@@ -522,16 +430,19 @@ + D1(printk(".\n")); + } + +- local_irq_save(flags); + if ((t = fast_timer_list) != NULL) + { + /* Start next timer.. */ +- long us; +- struct timeval tv; ++ long us = 0; ++ struct fasttime_t tv; + + do_gettimeofday_fast(&tv); +- us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 + +- t->tv_expires.tv_usec - tv.tv_usec); ++ ++ /* time_after_eq takes care of wrapping */ ++ if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff)) ++ us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * 1000000 / HZ + ++ t->tv_expires.tv_usec - tv.tv_usec); ++ + if (us > 0) + { + if (!fast_timer_running) +@@ -541,7 +452,6 @@ + #endif + start_timer_trig(us); + } +- local_irq_restore(flags); + break; + } + else +@@ -552,9 +462,10 @@ + D1(printk("e! %d\n", us)); + } + } +- local_irq_restore(flags); + } + ++ local_irq_restore(flags); ++ + if (!t) + { + D1(printk("ttrig stop!\n")); +@@ -577,28 +488,17 @@ + void schedule_usleep(unsigned long us) + { + struct fast_timer t; +-#ifdef DECLARE_WAITQUEUE + wait_queue_head_t sleep_wait; + init_waitqueue_head(&sleep_wait); +- { +- DECLARE_WAITQUEUE(wait, current); +-#else +- struct wait_queue *sleep_wait = NULL; +- struct wait_queue wait = { current, NULL }; +-#endif + + D1(printk("schedule_usleep(%d)\n", us)); +- add_wait_queue(&sleep_wait, &wait); +- set_current_state(TASK_INTERRUPTIBLE); + start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us, + "usleep"); +- schedule(); +- set_current_state(TASK_RUNNING); +- remove_wait_queue(&sleep_wait, &wait); ++ /* Uninterruptible sleep on the fast timer. (The condition is somewhat ++ redundant since the timer is what wakes us up.) */ ++ wait_event(sleep_wait, !fast_timer_pending(&t)); ++ + D1(printk("done schedule_usleep(%d)\n", us)); +-#ifdef DECLARE_WAITQUEUE +- } +-#endif + } + + #ifdef CONFIG_PROC_FS +@@ -638,7 +538,7 @@ + unsigned long flags; + int i = 0; + int num_to_show; +- struct timeval tv; ++ struct fasttime_t tv; + struct fast_timer *t, *nextt; + static char *bigbuf = NULL; + static unsigned long used; +@@ -646,7 +546,8 @@ + if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE))) + { + used = 0; +- bigbuf[0] = '\0'; ++ if (buf) ++ buf[0] = '\0'; + return 0; + } + +@@ -668,7 +569,7 @@ + used += sprintf(bigbuf + used, "Fast timer running: %s\n", + fast_timer_running ? "yes" : "no"); + used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n", +- (unsigned long)tv.tv_sec, ++ (unsigned long)tv.tv_jiff, + (unsigned long)tv.tv_usec); + #ifdef FAST_TIMER_SANITY_CHECKS + used += sprintf(bigbuf + used, "Sanity failed: %i\n", +@@ -717,9 +618,9 @@ + "d: %6li us data: 0x%08lX" + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +@@ -739,9 +640,9 @@ + "d: %6li us data: 0x%08lX" + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +@@ -759,9 +660,9 @@ + "d: %6li us data: 0x%08lX" + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data +@@ -772,7 +673,6 @@ + + used += sprintf(bigbuf + used, "Active timers:\n"); + local_irq_save(flags); +- local_irq_save(flags); + t = fast_timer_list; + while (t != NULL && (used+100 < BIG_BUF_SIZE)) + { +@@ -783,15 +683,15 @@ + /* " func: 0x%08lX" */ + "\n", + t->name, +- (unsigned long)t->tv_set.tv_sec, ++ (unsigned long)t->tv_set.tv_jiff, + (unsigned long)t->tv_set.tv_usec, +- (unsigned long)t->tv_expires.tv_sec, ++ (unsigned long)t->tv_expires.tv_jiff, + (unsigned long)t->tv_expires.tv_usec, + t->delay_us, + t->data + /* , t->function */ + ); +- local_irq_disable(); ++ local_irq_save(flags); + if (t->next != nextt) + { + printk("timer removed!\n"); +@@ -822,7 +722,7 @@ + static struct fast_timer tr[10]; + static int exp_num[10]; + +-static struct timeval tv_exp[100]; ++static struct fasttime_t tv_exp[100]; + + static void test_timeout(unsigned long data) + { +@@ -860,7 +760,7 @@ + int prev_num; + int j; + +- struct timeval tv, tv0, tv1, tv2; ++ struct fasttime_t tv, tv0, tv1, tv2; + + printk("fast_timer_test() start\n"); + do_gettimeofday_fast(&tv); +@@ -873,7 +773,7 @@ + { + do_gettimeofday_fast(&tv_exp[j]); + } +- printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec); ++ printk("fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec); + + for (j = 0; j < 1000; j++) + { +@@ -883,11 +783,11 @@ + for (j = 0; j < 100; j++) + { + printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n", +- tv_exp[j].tv_sec,tv_exp[j].tv_usec, +- tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec, +- tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec, +- tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec, +- tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec); ++ tv_exp[j].tv_jiff,tv_exp[j].tv_usec, ++ tv_exp[j+1].tv_jiff,tv_exp[j+1].tv_usec, ++ tv_exp[j+2].tv_jiff,tv_exp[j+2].tv_usec, ++ tv_exp[j+3].tv_jiff,tv_exp[j+3].tv_usec, ++ tv_exp[j+4].tv_jiff,tv_exp[j+4].tv_usec); + j += 4; + } + do_gettimeofday_fast(&tv0); +@@ -919,9 +819,9 @@ + } + } + do_gettimeofday_fast(&tv2); +- printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec); +- printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec); +- printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec); ++ printk("Timers started %is %06i\n", tv0.tv_jiff, tv0.tv_usec); ++ printk("Timers started at %is %06i\n", tv1.tv_jiff, tv1.tv_usec); ++ printk("Timers done %is %06i\n", tv2.tv_jiff, tv2.tv_usec); + DP(printk("buf0:\n"); + printk(buf0); + printk("buf1:\n"); +@@ -943,9 +843,9 @@ + printk("%-10s set: %6is %06ius exp: %6is %06ius " + "data: 0x%08X func: 0x%08X\n", + t->name, +- t->tv_set.tv_sec, ++ t->tv_set.tv_jiff, + t->tv_set.tv_usec, +- t->tv_expires.tv_sec, ++ t->tv_expires.tv_jiff, + t->tv_expires.tv_usec, + t->data, + t->function +@@ -953,10 +853,10 @@ + + printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n", + t->delay_us, +- tv_exp[j].tv_sec, ++ tv_exp[j].tv_jiff, + tv_exp[j].tv_usec, + exp_num[j], +- (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); ++ (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec); + } + proc_fasttimer_read(buf5, NULL, 0, 0, 0); + printk("buf5 after all done:\n"); +@@ -966,7 +866,7 @@ + #endif + + +-void fast_timer_init(void) ++int fast_timer_init(void) + { + /* For some reason, request_irq() hangs when called froom time_init() */ + if (!fast_timer_is_init) +@@ -981,10 +881,10 @@ + proc_register_dynamic(&proc_root, &fasttimer_proc_entry); + #endif + #endif /* PROC_FS */ +- if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, IRQF_DISABLED, +- "fast timer int", NULL)) ++ if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_SHIRQ | SA_INTERRUPT, ++ "fast timer int", &fast_timer_list)) + { +- printk("err: timer1 irq\n"); ++ printk("err: fasttimer irq\n"); + } + fast_timer_is_init = 1; + #ifdef FAST_TIMER_TEST +@@ -992,4 +892,6 @@ + fast_timer_test(); + #endif + } ++ return 0; + } ++__initcall(fast_timer_init); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/head.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/head.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/head.S 2007-01-09 10:29:19.000000000 +0100 +@@ -4,7 +4,6 @@ + * Copyright (C) 2003, Axis Communications AB + */ + +- + #define ASSEMBLER_MACROS_ONLY + + /* +@@ -12,14 +11,21 @@ + * -traditional must not be used when assembling this file. + */ + #include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/memmap.h> ++#include <asm/arch/hwregs/intr_vect.h> + #include <asm/arch/hwregs/asm/mmu_defs_asm.h> + #include <asm/arch/hwregs/asm/reg_map_asm.h> + #include <asm/arch/hwregs/asm/config_defs_asm.h> + #include <asm/arch/hwregs/asm/bif_core_defs_asm.h> +- ++#include <asm/arch/hwregs/asm/pinmux_defs_asm.h> ++#include <asm/arch/hwregs/asm/gio_defs_asm.h> ++ + #define CRAMFS_MAGIC 0x28cd3d45 ++#define JHEAD_MAGIC 0x1FF528A6 ++#define JHEAD_SIZE 8 + #define RAM_INIT_MAGIC 0x56902387 +-#define COMMAND_LINE_MAGIC 0x87109563 ++#define COMMAND_LINE_MAGIC 0x87109563 ++#define NAND_BOOT_MAGIC 0x9a9db001 + + ;; NOTE: R8 and R9 carry information from the decompressor (if the + ;; kernel was compressed). They must not be used in the code below +@@ -30,11 +36,10 @@ + .global romfs_start + .global romfs_length + .global romfs_in_flash ++ .global nand_boot + .global swapper_pg_dir +- .global crisv32_nand_boot +- .global crisv32_nand_cramfs_offset + +- ;; Dummy section to make it bootable with current VCS simulator ++ ;; Dummy section to make it bootable with current VCS simulator + #ifdef CONFIG_ETRAXFS_SIM + .section ".boot", "ax" + ba tstart +@@ -42,13 +47,13 @@ + #endif + + .text +-tstart: ++tstart: + ;; This is the entry point of the kernel. The CPU is currently in + ;; supervisor mode. +- ;; ++ ;; + ;; 0x00000000 if flash. + ;; 0x40004000 if DRAM. +- ;; ++ ;; + di + + ;; Start clocks for used blocks. +@@ -72,20 +77,25 @@ + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0 + move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1 + move.d $r1, [$r0] +- +-#ifdef CONFIG_ETRAXFS_SIM ++ ++#ifdef CONFIG_ETRAXFS_SIM + ;; Set up minimal flash waitstates + move.d 0, $r10 + move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11 + move.d $r10, [$r11] +-#endif ++#endif + ++#ifdef CONFIG_SMP ++secondary_cpu_entry: /* Entry point for secondary CPUs */ ++ di ++#endif ++ + ;; Setup and enable the MMU. Use same configuration for both the data + ;; and the instruction MMU. + ;; + ;; Note; 3 cycles is needed for a bank-select to take effect. Further; + ;; bank 1 is the instruction MMU, bank 2 is the data MMU. +-#ifndef CONFIG_ETRAXFS_SIM ++#ifndef CONFIG_ETRAXFS_SIM + move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0 +@@ -96,7 +106,7 @@ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \ + | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0 +-#endif ++#endif + + ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00. + move.d REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 4) \ +@@ -146,8 +156,8 @@ + | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \ + | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2 +-#endif +- ++#endif ++ + ;; Update instruction MMU. + move 1, $srs + nop +@@ -165,7 +175,7 @@ + move $r0, $s2 ; kbase_hi. + move $r1, $s1 ; kbase_lo + move $r2, $s0 ; mm_cfg, virtual memory configuration. +- ++ + ;; Enable data and instruction MMU. + move 0, $srs + moveq 0xf, $r0 ; IMMU, DMMU, DCache, Icache on +@@ -183,17 +193,11 @@ + nop + nop + nop +- move $s10, $r0 ++ move $s12, $r0 + cmpq 0, $r0 + beq master_cpu + nop + slave_cpu: +- ; A slave waits for cpu_now_booting to be equal to CPU ID. +- move.d cpu_now_booting, $r1 +-slave_wait: +- cmp.d [$r1], $r0 +- bne slave_wait +- nop + ; Time to boot-up. Get stack location provided by master CPU. + move.d smp_init_current_idle_thread, $r1 + move.d [$r1], $sp +@@ -203,9 +207,16 @@ + jsr smp_callin + nop + master_cpu: +-#endif ++ /* Set up entry point for secondary CPUs. The boot ROM has set up ++ * EBP at start of internal memory. The CPU will get there ++ * later when we issue an IPI to them... */ ++ move.d MEM_INTMEM_START + IPI_INTR_VECT * 4, $r0 ++ move.d secondary_cpu_entry, $r1 ++ move.d $r1, [$r0] ++#endif + #ifndef CONFIG_ETRAXFS_SIM +- ;; Check if starting from DRAM or flash. ++ ; Check if starting from DRAM (network->RAM boot or unpacked ++ ; compressed kernel), or directly from flash. + lapcq ., $r0 + and.d 0x7fffffff, $r0 ; Mask off the non-cache bit. + cmp.d 0x10000, $r0 ; Arbitrary, something above this code. +@@ -238,6 +249,7 @@ + ;; Copy the text and data section to DRAM. This depends on that the + ;; variables used below are correctly set up by the linker script. + ;; The calculated value stored in R4 is used below. ++ ;; Leave the cramfs file system (piggybacked after the kernel) in flash. + moveq 0, $r0 ; Source. + move.d text_start, $r1 ; Destination. + move.d __vmlinux_end, $r2 +@@ -249,7 +261,7 @@ + blo 1b + nop + +- ;; Keep CRAMFS in flash. ++ ;; Check for cramfs. + moveq 0, $r0 + move.d romfs_length, $r1 + move.d $r0, [$r1] +@@ -257,7 +269,8 @@ + cmp.d CRAMFS_MAGIC, $r0 + bne 1f + nop +- ++ ++ ;; Set length and start of cramfs, set romfs_in_flash flag + addoq +4, $r4, $acr + move.d [$acr], $r0 + move.d romfs_length, $r1 +@@ -273,35 +286,32 @@ + nop + + _inram: +- ;; Check if booting from NAND flash (in that case we just remember the offset +- ;; into the flash where cramfs should be). +- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 +- move.d [$r0], $r0 +- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 +- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 +- bne move_cramfs +- moveq 1,$r0 +- move.d crisv32_nand_boot, $r1 +- move.d $r0, [$r1] +- move.d crisv32_nand_cramfs_offset, $r1 +- move.d $r9, [$r1] ++ ;; Check if booting from NAND flash; if so, set appropriate flags ++ ;; and move on. ++ cmp.d NAND_BOOT_MAGIC, $r12 ++ bne move_cramfs ; not nand, jump + moveq 1, $r0 +- move.d romfs_in_flash, $r1 ++ move.d nand_boot, $r1 ; tell axisflashmap we're booting from NAND ++ move.d $r0, [$r1] ++ moveq 0, $r0 ; tell axisflashmap romfs is not in ++ move.d romfs_in_flash, $r1 ; (directly accessed) flash + move.d $r0, [$r1] +- jump _start_it ++ jump _start_it ; continue with boot + nop + +-move_cramfs: +- ;; Move the cramfs after BSS. ++move_cramfs: ++ ;; kernel is in DRAM. ++ ;; Must figure out if there is a piggybacked rootfs image or not. ++ ;; Set romfs_length to 0 => no rootfs image available by default. + moveq 0, $r0 + move.d romfs_length, $r1 + move.d $r0, [$r1] + +-#ifndef CONFIG_ETRAXFS_SIM ++#ifndef CONFIG_ETRAXFS_SIM + ;; The kernel could have been unpacked to DRAM by the loader, but +- ;; the cramfs image could still be inte the flash immediately +- ;; following the compressed kernel image. The loaded passes the address +- ;; of the bute succeeding the last compressed byte in the flash in ++ ;; the cramfs image could still be in the flash immediately ++ ;; following the compressed kernel image. The loader passes the address ++ ;; of the byte succeeding the last compressed byte in the flash in + ;; register R9 when starting the kernel. + cmp.d 0x0ffffff8, $r9 + bhs _no_romfs_in_flash ; R9 points outside the flash area. +@@ -309,12 +319,14 @@ + #else + ba _no_romfs_in_flash + nop +-#endif ++#endif ++ ;; cramfs rootfs might to be in flash. Check for it. + move.d [$r9], $r0 ; cramfs_super.magic + cmp.d CRAMFS_MAGIC, $r0 + bne _no_romfs_in_flash + nop + ++ ;; found cramfs in flash. set address and size, and romfs_in_flash flag. + addoq +4, $r9, $acr + move.d [$acr], $r0 + move.d romfs_length, $r1 +@@ -330,29 +342,45 @@ + nop + + _no_romfs_in_flash: +- ;; Look for cramfs. +-#ifndef CONFIG_ETRAXFS_SIM ++ ;; No romfs in flash, so look for cramfs, or jffs2 with jhead, ++ ;; after kernel in RAM, as is the case with network->RAM boot. ++ ;; For cramfs, partition starts with magic and length. ++ ;; For jffs2, a jhead is prepended which contains with magic and length. ++ ;; The jhead is not part of the jffs2 partition however. ++#ifndef CONFIG_ETRAXFS_SIM + move.d __vmlinux_end, $r0 + #else +- move.d __end, $r0 +-#endif ++ move.d __end, $r0 ++#endif + move.d [$r0], $r1 +- cmp.d CRAMFS_MAGIC, $r1 +- bne 2f ++ cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic? ++ beq 2f ; yes, jump ++ nop ++ cmp.d JHEAD_MAGIC, $r1 ; jffs2 (jhead) magic? ++ bne 4f ; no, skip copy ++ nop ++ addq 4, $r0 ; location of jffs2 size ++ move.d [$r0+], $r2 ; fetch jffs2 size -> r2 ++ ; r0 now points to start of jffs2 ++ ba 3f + nop ++2: ++ addoq +4, $r0, $acr ; location of cramfs size ++ move.d [$acr], $r2 ; fetch cramfs size -> r2 ++ ; r0 still points to start of cramfs ++3: ++ ;; Now, move the root fs to after kernel's BSS + +- addoq +4, $r0, $acr +- move.d [$acr], $r2 +- move.d _end, $r1 ++ move.d _end, $r1 ; start of cramfs -> r1 + move.d romfs_start, $r3 +- move.d $r1, [$r3] ++ move.d $r1, [$r3] ; store at romfs_start (for axisflashmap) + move.d romfs_length, $r3 +- move.d $r2, [$r3] ++ move.d $r2, [$r3] ; store size at romfs_length + +-#ifndef CONFIG_ETRAXFS_SIM +- add.d $r2, $r0 ++#ifndef CONFIG_ETRAXFS_SIM ++ add.d $r2, $r0 ; copy from end and downwards + add.d $r2, $r1 +- ++ + lsrq 1, $r2 ; Size is in bytes, we copy words. + addq 1, $r2 + 1: +@@ -364,17 +392,24 @@ + bne 1b + nop + #endif +- +-2: ++ ++4: ++ ;; BSS move done. ++ ;; Clear romfs_in_flash flag, as we now know romfs is in DRAM ++ ;; Also clear nand_boot flag; if we got here, we know we've not ++ ;; booted from NAND flash. + moveq 0, $r0 + move.d romfs_in_flash, $r1 + move.d $r0, [$r1] ++ moveq 0, $r0 ++ move.d nand_boot, $r1 ++ move.d $r0, [$r1] + + jump _start_it ; Jump to cached code. + nop +- ++ + _start_it: +- ++ + ;; Check if kernel command line is supplied + cmp.d COMMAND_LINE_MAGIC, $r10 + bne no_command_line +@@ -383,9 +418,9 @@ + move.d 256, $r13 + move.d cris_command_line, $r10 + or.d 0x80000000, $r11 ; Make it virtual +-1: +- move.b [$r11+], $r12 +- move.b $r12, [$r10+] ++1: ++ move.b [$r11+], $r1 ++ move.b $r1, [$r10+] + subq 1, $r13 + bne 1b + nop +@@ -401,7 +436,7 @@ + move.d etrax_irv, $r1 ; Set the exception base register and pointer. + move.d $r0, [$r1] + +-#ifndef CONFIG_ETRAXFS_SIM ++#ifndef CONFIG_ETRAXFS_SIM + ;; Clear the BSS region from _bss_start to _end. + move.d __bss_start, $r0 + move.d _end, $r1 +@@ -429,17 +464,31 @@ + .data + etrax_irv: + .dword 0 ++ ++; Variables for communication with the Axis flash map driver (axisflashmap), ++; and for setting up memory in arch/cris/kernel/setup.c . ++ ++; romfs_start is set to the start of the root file system, if it exists ++; in directly accessible memory (i.e. NOR Flash when booting from Flash, ++; or RAM when booting directly from a network-downloaded RAM image) + romfs_start: + .dword 0 ++ ++; romfs_length is set to the size of the root file system image, if it exists ++; in directly accessible memory (see romfs_start). Otherwise it is set to 0. + romfs_length: + .dword 0 ++ ++; romfs_in_flash is set to 1 if the root file system resides in directly ++; accessible flash memory (i.e. NOR flash). It is set to 0 for RAM boot ++; or NAND flash boot. + romfs_in_flash: + .dword 0 +-crisv32_nand_boot: +- .dword 0 +-crisv32_nand_cramfs_offset: +- .dword 0 + ++; nand_boot is set to 1 when the kernel has been booted from NAND flash ++nand_boot: ++ .dword 0 ++ + swapper_pg_dir = 0xc0002000 + + .section ".init.data", "aw" +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/io.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/io.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/io.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/io.c 2006-11-21 00:04:55.000000000 +0100 +@@ -1,7 +1,7 @@ +-/* ++/* + * Helper functions for I/O pins. + * +- * Copyright (c) 2004 Axis Communications AB. ++ * Copyright (c) 2004, 2006 Axis Communications AB. + */ + + #include <linux/types.h> +@@ -15,6 +15,10 @@ + #include <asm/arch/pinmux.h> + #include <asm/arch/hwregs/gio_defs.h> + ++#ifndef DEBUG ++#define DEBUG(x) ++#endif ++ + struct crisv32_ioport crisv32_ioports[] = + { + { +@@ -46,13 +50,15 @@ + (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout), + (unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din), + 18 +- } ++ } + }; + + #define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport) + +-struct crisv32_iopin crisv32_led1_green; +-struct crisv32_iopin crisv32_led1_red; ++struct crisv32_iopin crisv32_led_net0_green; ++struct crisv32_iopin crisv32_led_net0_red; ++struct crisv32_iopin crisv32_led_net1_green; ++struct crisv32_iopin crisv32_led_net1_red; + struct crisv32_iopin crisv32_led2_green; + struct crisv32_iopin crisv32_led2_red; + struct crisv32_iopin crisv32_led3_green; +@@ -76,34 +82,54 @@ + static int __init crisv32_io_init(void) + { + int ret = 0; ++ ++ u32 i; ++ ++ /* Locks *should* be dynamically initialized. */ ++ for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++) ++ spin_lock_init (&crisv32_ioports[i].lock); ++ spin_lock_init (&dummy_port.lock); ++ + /* Initialize LEDs */ +- ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G); +- ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R); ++#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO)) ++ ret += crisv32_io_get_name(&crisv32_led_net0_green, CONFIG_ETRAX_LED_G_NET0); ++ crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out); ++ if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) { ++ ret += crisv32_io_get_name(&crisv32_led_net0_red, CONFIG_ETRAX_LED_R_NET0); ++ crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out); ++ } else ++ crisv32_led_net0_red = dummy_led; ++#endif ++ ++#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO ++ ret += crisv32_io_get_name(&crisv32_led_net1_green, CONFIG_ETRAX_LED_G_NET1); ++ crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out); ++ if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) { ++ crisv32_io_get_name(&crisv32_led_net1_red, CONFIG_ETRAX_LED_R_NET1); ++ crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out); ++ } else ++ crisv32_led_net1_red = dummy_led; ++#endif ++ + ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G); + ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R); + ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G); + ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R); +- crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out); +- crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out); ++ + crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out); + crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out); + +- if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R)) +- crisv32_led1_red = dummy_led; +- if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R)) +- crisv32_led2_red = dummy_led; +- + return ret; + } + + __initcall(crisv32_io_init); + +-int crisv32_io_get(struct crisv32_iopin* iopin, ++int crisv32_io_get(struct crisv32_iopin* iopin, + unsigned int port, unsigned int pin) + { +- if (port > NBR_OF_PORTS) ++ if (port > NBR_OF_PORTS) + return -EINVAL; + if (port > crisv32_ioports[port].pin_count) + return -EINVAL; +@@ -111,14 +137,17 @@ + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + +- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) ++ /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ ++ /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ ++ if (port != 0 && crisv32_pinmux_alloc(port-1, pin, pin, pinmux_gpio)) + return -EIO; +- ++ DEBUG(printk("crisv32_io_get: Allocated pin %d on port %d\n", pin, port )); ++ + return 0; + } + + int crisv32_io_get_name(struct crisv32_iopin* iopin, +- char* name) ++ const char* name) + { + int port; + int pin; +@@ -128,7 +157,7 @@ + + if (toupper(*name) < 'A' || toupper(*name) > 'E') + return -EINVAL; +- ++ + port = toupper(*name) - 'A'; + name++; + pin = simple_strtoul(name, NULL, 10); +@@ -139,9 +168,12 @@ + iopin->bit = 1 << pin; + iopin->port = &crisv32_ioports[port]; + +- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio)) ++ /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */ ++ /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */ ++ if (port != 0 && crisv32_pinmux_alloc(port-1, pin, pin, pinmux_gpio)) + return -EIO; + ++ DEBUG(printk("crisv32_io_get_name: Allocated pin %d on port %d\n", pin, port)); + return 0; + } + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/irq.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/irq.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/irq.c 2006-10-13 14:43:13.000000000 +0200 +@@ -44,10 +44,10 @@ + cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */ + }; + +-struct cris_irq_allocation irq_allocations[NR_IRQS] = ++struct cris_irq_allocation irq_allocations[NR_IRQS] = + {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}}; + +-static unsigned long irq_regs[NR_CPUS] = ++static unsigned long irq_regs[NR_CPUS] = + { + regi_irq, + #ifdef CONFIG_SMP +@@ -79,9 +79,9 @@ + extern void kgdb_init(void); + extern void breakpoint(void); + +-/* +- * Build the IRQ handler stubs using macros from irq.h. First argument is the +- * IRQ number, the second argument is the corresponding bit in ++/* ++ * Build the IRQ handler stubs using macros from irq.h. First argument is the ++ * IRQ number, the second argument is the corresponding bit in + * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h. + */ + BUILD_IRQ(0x31, (1 << 0)) /* memarb */ +@@ -139,7 +139,7 @@ + + spin_lock_irqsave(&irq_lock, flags); + intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); +- ++ + /* Remember; 1 let thru, 0 block. */ + intr_mask &= ~(1 << (irq - FIRST_IRQ)); + +@@ -152,10 +152,10 @@ + { + int intr_mask; + unsigned long flags; +- ++ + spin_lock_irqsave(&irq_lock, flags); + intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); +- ++ + /* Remember; 1 let thru, 0 block. */ + intr_mask |= (1 << (irq - FIRST_IRQ)); + +@@ -168,7 +168,7 @@ + { + int cpu; + unsigned long flags; +- ++ + spin_lock_irqsave(&irq_lock, flags); + cpu = irq_allocations[irq - FIRST_IRQ].cpu; + +@@ -178,12 +178,12 @@ + spin_unlock_irqrestore(&irq_lock, flags); + return smp_processor_id(); + } +- ++ + + /* Let the interrupt stay if possible */ + if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask)) + goto out; +- ++ + /* IRQ must be moved to another CPU. */ + cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask); + irq_allocations[irq - FIRST_IRQ].cpu = cpu; +@@ -287,7 +287,7 @@ + * interrupt from the CPU and software has to sort out which + * interrupts that happened. There are two special cases here: + * +- * 1. Timer interrupts may never be blocked because of the ++ * 1. Timer interrupts may never be blocked because of the + * watchdog (refer to comment in include/asr/arch/irq.h) + * 2. GDB serial port IRQs are unhandled here and will be handled + * as a single IRQ when it strikes again because the GDB +@@ -304,33 +304,33 @@ + cpu = smp_processor_id(); + + /* An extra irq_enter here to prevent softIRQs to run after +- * each do_IRQ. This will decrease the interrupt latency. ++ * each do_IRQ. This will decrease the interrupt latency. + */ + irq_enter(); + + /* Get which IRQs that happend. */ + masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect); +- ++ + /* Calculate new IRQ mask with these IRQs disabled. */ + mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask); + mask &= ~masked; + + /* Timer IRQ is never masked */ + if (masked & TIMER_MASK) +- mask |= TIMER_MASK; ++ mask |= TIMER_MASK; + + /* Block all the IRQs */ + REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask); +- ++ + /* Check for timer IRQ and handle it special. */ + if (masked & TIMER_MASK) { + masked &= ~TIMER_MASK; +- do_IRQ(TIMER_INTR_VECT, regs); ++ do_IRQ(TIMER_INTR_VECT, regs); + } + + #ifdef IGNORE_MASK + /* Remove IRQs that can't be handled as multiple. */ +- masked &= ~IGNORE_MASK; ++ masked &= ~IGNORE_MASK; + #endif + + /* Handle the rest of the IRQs. */ +@@ -377,7 +377,7 @@ + irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU; + irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED; + irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU; +- ++ + set_exception_vector(0x00, nmi_interrupt); + set_exception_vector(0x30, multiple_interrupt); + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb.c 2005-07-06 11:40:49.000000000 +0200 +@@ -25,7 +25,7 @@ + * kgdb usage notes: + * ----------------- + * +- * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be ++ * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be + * built with different gcc flags: "-g" is added to get debug infos, and + * "-fomit-frame-pointer" is omitted to make debugging easier. Since the + * resulting kernel will be quite big (approx. > 7 MB), it will be stripped +@@ -118,7 +118,7 @@ + * call to kgdb_init() is necessary in order to allow any breakpoints + * or error conditions to be properly intercepted and reported to gdb. + * Two, a breakpoint needs to be generated to begin communication. This +- * is most easily accomplished by a call to breakpoint(). ++ * is most easily accomplished by a call to breakpoint(). + * + * The following gdb commands are supported: + * +@@ -382,8 +382,8 @@ + int getDebugChar(void); + + #ifdef CONFIG_ETRAXFS_SIM +-int getDebugChar(void) +-{ ++int getDebugChar(void) ++{ + return socketread(); + } + #endif +@@ -490,7 +490,7 @@ + + /********************************** Breakpoint *******************************/ + /* Use an internal stack in the breakpoint and interrupt response routines. +- FIXME: How do we know the size of this stack is enough? ++ FIXME: How do we know the size of this stack is enough? + Global so it can be reached from assembler code. */ + #define INTERNAL_STACK_SIZE 1024 + char internal_stack[INTERNAL_STACK_SIZE]; +@@ -511,7 +511,7 @@ + gdb_cris_strcpy(char *s1, const char *s2) + { + char *s = s1; +- ++ + for (s = s1; (*s++ = *s2++) != '\0'; ) + ; + return s1; +@@ -522,7 +522,7 @@ + gdb_cris_strlen(const char *s) + { + const char *sc; +- ++ + for (sc = s; *sc != '\0'; sc++) + ; + return (sc - s); +@@ -534,7 +534,7 @@ + { + const unsigned char uc = c; + const unsigned char *su; +- ++ + for (su = s; 0 < n; ++su, --n) + if (*su == uc) + return (void *)su; +@@ -549,15 +549,15 @@ + char *s1; + char *sd; + int x = 0; +- ++ + for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hexchars); +- ++ + if (endptr) { + /* Unconverted suffix is stored in endptr unless endptr is NULL. */ + *endptr = s1; + } +- ++ + return x; + } + +@@ -629,7 +629,7 @@ + } else if (regno == PID) { + /* 32-bit register. */ + *valptr = *(unsigned int *)((char *)®.pid); +- ++ + } else if (regno == SRS) { + /* 8-bit register. */ + *valptr = (unsigned int)(*(unsigned char *)((char *)®.srs)); +@@ -726,7 +726,7 @@ + *buf++ = highhex (ch); + *buf++ = lowhex (ch); + } +- ++ + /* Terminate properly. */ + *buf = '\0'; + return buf; +@@ -804,7 +804,7 @@ + continue; + + buffer[count] = 0; +- ++ + if (ch == '#') { + xmitcsum = hex(getDebugChar()) << 4; + xmitcsum += hex(getDebugChar()); +@@ -836,7 +836,7 @@ + int checksum; + int runlen; + int encode; +- ++ + do { + char *src = buffer; + putDebugChar('$'); +@@ -905,42 +905,42 @@ + { + char *ptr = output_buffer; + unsigned int reg_cont; +- ++ + /* Send trap type (converted to signal) */ + +- *ptr++ = 'T'; ++ *ptr++ = 'T'; + *ptr++ = highhex(sigval); + *ptr++ = lowhex(sigval); + + if (((reg.exs & 0xff00) >> 8) == 0xc) { +- ++ + /* Some kind of hardware watchpoint triggered. Find which one + and determine its type (read/write/access). */ + int S, bp, trig_bits = 0, rw_bits = 0; + int trig_mask = 0; + unsigned int *bp_d_regs = &sreg.s3_3; + /* In a lot of cases, the stopped data address will simply be EDA. +- In some cases, we adjust it to match the watched data range. ++ In some cases, we adjust it to match the watched data range. + (We don't want to change the actual EDA though). */ + unsigned int stopped_data_address; + /* The S field of EXS. */ + S = (reg.exs & 0xffff0000) >> 16; +- ++ + if (S & 1) { + /* Instruction watchpoint. */ + /* FIXME: Check against, and possibly adjust reported EDA. */ + } else { + /* Data watchpoint. Find the one that triggered. */ + for (bp = 0; bp < 6; bp++) { +- ++ + /* Dx_RD, Dx_WR in the S field of EXS for this BP. */ + int bitpos_trig = 1 + bp * 2; + /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */ + int bitpos_config = 2 + bp * 4; +- ++ + /* Get read/write trig bits for this BP. */ + trig_bits = (S & (3 << bitpos_trig)) >> bitpos_trig; +- ++ + /* Read/write config bits for this BP. */ + rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config; + if (trig_bits) { +@@ -949,11 +949,11 @@ + if ((rw_bits == 0x1 && trig_bits != 0x1) || + (rw_bits == 0x2 && trig_bits != 0x2)) + panic("Invalid r/w trigging for this BP"); +- ++ + /* Mark this BP as trigged for future reference. */ + trig_mask |= (1 << bp); +- +- if (reg.eda >= bp_d_regs[bp * 2] && ++ ++ if (reg.eda >= bp_d_regs[bp * 2] && + reg.eda <= bp_d_regs[bp * 2 + 1]) { + /* EDA withing range for this BP; it must be the one + we're looking for. */ +@@ -972,7 +972,7 @@ + + /* Read/write config bits for this BP (needed later). */ + rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config; +- ++ + if (trig_mask & (1 << bp)) { + /* EDA within 31 bytes of the configured start address? */ + if (reg.eda + 31 >= bp_d_regs[bp * 2]) { +@@ -987,12 +987,12 @@ + } + } + } +- ++ + /* No match yet? */ + BUG_ON(bp >= 6); + /* Note that we report the type according to what the BP is configured + for (otherwise we'd never report an 'awatch'), not according to how +- it trigged. We did check that the trigged bits match what the BP is ++ it trigged. We did check that the trigged bits match what the BP is + configured for though. */ + if (rw_bits == 0x1) { + /* read */ +@@ -1110,12 +1110,12 @@ + + if (sigval == SIGTRAP) { + /* Break 8, single step or hardware breakpoint exception. */ +- ++ + /* Check IDX field of EXS. */ + if (((reg.exs & 0xff00) >> 8) == 0x18) { + + /* Break 8. */ +- ++ + /* Static (compiled) breakpoints must return to the next instruction + in order to avoid infinite loops (default value of ERP). Dynamic + (gdb-invoked) must subtract the size of the break instruction from +@@ -1132,7 +1132,7 @@ + reg.pc -= 2; + } + } +- ++ + } else if (((reg.exs & 0xff00) >> 8) == 0x3) { + /* Single step. */ + /* Don't fiddle with S1. */ +@@ -1190,10 +1190,10 @@ + unsigned int *bp_d_regs = &sreg.s3_3; + + /* The watchpoint allocation scheme is the simplest possible. +- For example, if a region is watched for read and ++ For example, if a region is watched for read and + a write watch is requested, a new watchpoint will + be used. Also, if a watch for a region that is already +- covered by one or more existing watchpoints, a new ++ covered by one or more existing watchpoints, a new + watchpoint will be used. */ + + /* First, find a free data watchpoint. */ +@@ -1205,13 +1205,13 @@ + break; + } + } +- ++ + if (bp > 5) { + /* We're out of watchpoints. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + return; + } +- ++ + /* Configure the control register first. */ + if (type == '3' || type == '4') { + /* Trigger on read. */ +@@ -1221,11 +1221,11 @@ + /* Trigger on write. */ + sreg.s0_3 |= (2 << (2 + bp * 4)); + } +- ++ + /* Ugly pointer arithmetics to configure the watched range. */ + bp_d_regs[bp * 2] = addr; + bp_d_regs[bp * 2 + 1] = (addr + len - 1); +- } ++ } + + /* Set the S1 flag to enable watchpoints. */ + reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); +@@ -1258,7 +1258,7 @@ + /* Not in use. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + return; +- } ++ } + /* Deconfigure. */ + sreg.s1_3 = 0; + sreg.s2_3 = 0; +@@ -1268,8 +1268,8 @@ + unsigned int *bp_d_regs = &sreg.s3_3; + /* Try to find a watchpoint that is configured for the + specified range, then check that read/write also matches. */ +- +- /* Ugly pointer arithmetic, since I cannot rely on a ++ ++ /* Ugly pointer arithmetic, since I cannot rely on a + single switch (addr) as there may be several watchpoints with + the same start address for example. */ + +@@ -1279,7 +1279,7 @@ + /* Matching range. */ + int bitpos = 2 + bp * 4; + int rw_bits; +- ++ + /* Read/write bits for this BP. */ + rw_bits = (sreg.s0_3 & (0x3 << bitpos)) >> bitpos; + +@@ -1347,7 +1347,7 @@ + (char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), + 16 * sizeof(unsigned int)); + break; +- } ++ } + case 'G': + /* Write registers. GXX..XX + Each byte of register data is described by two hex digits. +@@ -1357,11 +1357,11 @@ + hex2mem((char *)®, &input_buffer[1], sizeof(registers)); + /* Support registers. */ + hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)), +- &input_buffer[1] + sizeof(registers), ++ &input_buffer[1] + sizeof(registers), + 16 * sizeof(unsigned int)); + gdb_cris_strcpy(output_buffer, "OK"); + break; +- ++ + case 'P': + /* Write register. Pn...=r... + Write register n..., hex value without 0x, with value r..., +@@ -1393,7 +1393,7 @@ + } + } + break; +- ++ + case 'm': + /* Read from memory. mAA..AA,LLLL + AA..AA is the address and LLLL is the length. +@@ -1416,7 +1416,7 @@ + mem2hex(output_buffer, addr, len); + } + break; +- ++ + case 'X': + /* Write to memory. XAA..AA,LLLL:XX..XX + AA..AA is the start address, LLLL is the number of bytes, and +@@ -1448,7 +1448,7 @@ + } + } + break; +- ++ + case 'c': + /* Continue execution. cAA..AA + AA..AA is the address where execution is resumed. If AA..AA is +@@ -1472,15 +1472,15 @@ + if ((sreg.s0_3 & 0x3fff) == 0) { + reg.ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT)); + } +- ++ + return; +- ++ + case 's': + /* Step. sAA..AA + AA..AA is the address where execution is resumed. If AA..AA is + omitted, resume at the present address. Success: return to the + executing thread. Failure: will never know. */ +- ++ + if (input_buffer[1] != '\0') { + /* FIXME: Doesn't handle address argument. */ + gdb_cris_strcpy(output_buffer, error_message[E04]); +@@ -1497,7 +1497,7 @@ + return; + + case 'Z': +- ++ + /* Insert breakpoint or watchpoint, Ztype,addr,length. + Remote protocol says: A remote target shall return an empty string + for an unrecognized breakpoint or watchpoint packet type. */ +@@ -1522,7 +1522,7 @@ + int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16); + int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16); + char type = input_buffer[1]; +- ++ + remove_watchpoint(type, addr, len); + break; + } +@@ -1537,14 +1537,14 @@ + output_buffer[2] = lowhex(sigval); + output_buffer[3] = 0; + break; +- ++ + case 'D': + /* Detach from host. D + Success: OK, and return to the executing thread. + Failure: will never know */ + putpacket("OK"); + return; +- ++ + case 'k': + case 'r': + /* kill request or reset request. +@@ -1552,7 +1552,7 @@ + Failure: will never know. */ + kill_restart(); + break; +- ++ + case 'C': + case 'S': + case '!': +@@ -1570,7 +1570,7 @@ + and ignored (below)? */ + gdb_cris_strcpy(output_buffer, error_message[E04]); + break; +- ++ + default: + /* The stub should ignore other request and send an empty + response ($#<checksum>). This way we can extend the protocol and GDB +@@ -1587,7 +1587,7 @@ + { + reg_intr_vect_rw_mask intr_mask; + reg_ser_rw_intr_mask ser_intr_mask; +- ++ + /* Configure the kgdb serial port. */ + #if defined(CONFIG_ETRAX_KGDB_PORT0) + /* Note: no shortcut registered (not handled by multiple_interrupt). +@@ -1597,9 +1597,9 @@ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser0 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); +- ++ + ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask); +- ser_intr_mask.data_avail = regk_ser_yes; ++ ser_intr_mask.dav = regk_ser_yes; + REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask); + #elif defined(CONFIG_ETRAX_KGDB_PORT1) + /* Note: no shortcut registered (not handled by multiple_interrupt). +@@ -1609,9 +1609,9 @@ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser1 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); +- ++ + ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask); +- ser_intr_mask.data_avail = regk_ser_yes; ++ ser_intr_mask.dav = regk_ser_yes; + REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask); + #elif defined(CONFIG_ETRAX_KGDB_PORT2) + /* Note: no shortcut registered (not handled by multiple_interrupt). +@@ -1621,9 +1621,9 @@ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.ser2 = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); +- ++ + ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask); +- ser_intr_mask.data_avail = regk_ser_yes; ++ ser_intr_mask.dav = regk_ser_yes; + REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask); + #elif defined(CONFIG_ETRAX_KGDB_PORT3) + /* Note: no shortcut registered (not handled by multiple_interrupt). +@@ -1635,7 +1635,7 @@ + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); + + ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask); +- ser_intr_mask.data_avail = regk_ser_yes; ++ ser_intr_mask.dav = regk_ser_yes; + REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask); + #endif + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb_asm.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb_asm.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb_asm.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb_asm.S 2006-10-13 14:43:13.000000000 +0200 +@@ -11,7 +11,7 @@ + .globl kgdb_handle_exception + + kgdb_handle_exception: +- ++ + ;; Create a register image of the caller. + ;; + ;; First of all, save the ACR on the stack since we need it for address calculations. +@@ -262,7 +262,7 @@ + ;; Nothing in S15, bank 3 + clear.d [$acr] + addq 4, $acr +- ++ + ;; Check what got us here: get IDX field of EXS. + move $exs, $r10 + and.d 0xff00, $r10 +@@ -307,7 +307,7 @@ + handle_comm: + move.d internal_stack+1020, $sp ; Use the internal stack which grows upwards + jsr handle_exception ; Interactive routine +- nop ++ nop + + ;; + ;; Return to the caller +@@ -345,7 +345,7 @@ + ;; Nothing in S6 - S7, bank 0. + addq 4, $acr + addq 4, $acr +- ++ + move.d [$acr], $r0 + move $r0, $s8 + addq 4, $acr +@@ -507,7 +507,7 @@ + addq 8, $acr + + ;; Skip BZ, VR. +- addq 2, $acr ++ addq 2, $acr + + move [$acr], $pid ; Restore PID + addq 4, $acr +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/pinmux.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/pinmux.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/pinmux.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/pinmux.c 2006-08-11 10:32:21.000000000 +0200 +@@ -1,7 +1,7 @@ +-/* ++/* + * Allocator for I/O pins. All pins are allocated to GPIO at bootup. + * Unassigned pins and GPIO pins can be allocated to a fixed interface +- * or the I/O processor instead. ++ * or the I/O processor instead. + * + * Copyright (c) 2004 Axis Communications AB. + */ +@@ -33,9 +33,10 @@ + + if (!initialized) { + reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa); ++ REG_WR_INT(pinmux, regi_pinmux, rw_hwprot, 0); + initialized = 1; +- pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 = +- pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes; ++ pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 = ++ pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes; + REG_WR(pinmux, regi_pinmux, rw_pa, pa); + crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio); + crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio); +@@ -46,124 +47,137 @@ + return 0; + } + +-int +-crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) ++/* ++ * must be called with the pinmux_lock held. ++ */ ++static int __crisv32_pinmux_alloc(int port, int first_pin, int last_pin, ++ enum pin_mode mode) + { + int i; +- unsigned long flags; + +- crisv32_pinmux_init(); +- +- if (port > PORTS) ++ if (port >= PORTS || ++ first_pin < 0 || last_pin >= PORT_PINS || last_pin < first_pin) + return -EINVAL; +- +- spin_lock_irqsave(&pinmux_lock, flags); +- +- for (i = first_pin; i <= last_pin; i++) ++ ++ for (i = first_pin; i <= last_pin; i++) + { +- if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) && +- (pins[port][i] != mode)) ++ if ((pins[port][i] != pinmux_none) ++ && (pins[port][i] != pinmux_gpio) ++ && (pins[port][i] != mode)) + { +- spin_unlock_irqrestore(&pinmux_lock, flags); + #ifdef DEBUG + panic("Pinmux alloc failed!\n"); + #endif + return -EPERM; + } + } +- ++ + for (i = first_pin; i <= last_pin; i++) + pins[port][i] = mode; + + crisv32_pinmux_set(port); +- +- spin_unlock_irqrestore(&pinmux_lock, flags); +- + return 0; + } + + int ++crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode) ++{ ++ int r; ++ unsigned long flags; ++ ++ crisv32_pinmux_init(); ++ ++ spin_lock_irqsave(&pinmux_lock, flags); ++ r = __crisv32_pinmux_alloc(port, first_pin, last_pin, mode); ++ spin_unlock_irqrestore(&pinmux_lock, flags); ++ return r; ++} ++ ++int + crisv32_pinmux_alloc_fixed(enum fixed_function function) + { + int ret = -EINVAL; + char saved[sizeof pins]; + unsigned long flags; +- ++ reg_pinmux_rw_hwprot hwprot; ++ ++ crisv32_pinmux_init(); ++ + spin_lock_irqsave(&pinmux_lock, flags); + + /* Save internal data for recovery */ + memcpy(saved, pins, sizeof pins); +- +- reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); +- ++ ++ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); ++ + switch(function) + { + case pinmux_ser1: +- ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed); + hwprot.ser1 = regk_pinmux_yes; + break; + case pinmux_ser2: +- ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed); + hwprot.ser2 = regk_pinmux_yes; + break; + case pinmux_ser3: +- ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed); + hwprot.ser3 = regk_pinmux_yes; + break; + case pinmux_sser0: +- ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed); +- ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed); ++ ret |= __crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); + hwprot.sser0 = regk_pinmux_yes; + break; + case pinmux_sser1: +- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); + hwprot.sser1 = regk_pinmux_yes; + break; + case pinmux_ata0: +- ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed); +- ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed); ++ ret |= __crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed); + hwprot.ata0 = regk_pinmux_yes; + break; + case pinmux_ata1: +- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); +- ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed); ++ ret |= __crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed); + hwprot.ata1 = regk_pinmux_yes; + break; + case pinmux_ata2: +- ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed); +- ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed); ++ ret |= __crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed); + hwprot.ata2 = regk_pinmux_yes; + break; + case pinmux_ata3: +- ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed); +- ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed); ++ ret |= __crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed); + hwprot.ata2 = regk_pinmux_yes; + break; + case pinmux_ata: +- ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed); +- ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed); ++ ret |= __crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed); + hwprot.ata = regk_pinmux_yes; + break; + case pinmux_eth1: +- ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed); + hwprot.eth1 = regk_pinmux_yes; + hwprot.eth1_mgm = regk_pinmux_yes; + break; + case pinmux_timer: +- ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); ++ ret = __crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed); + hwprot.timer = regk_pinmux_yes; + spin_unlock_irqrestore(&pinmux_lock, flags); + return ret; + } +- ++ + if (!ret) + REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); + else + memcpy(pins, saved, sizeof pins); +- +- spin_unlock_irqrestore(&pinmux_lock, flags); +- +- return ret; ++ ++ spin_unlock_irqrestore(&pinmux_lock, flags); ++ ++ return ret; + } + + void +@@ -189,33 +203,126 @@ + #endif + } + +-int +-crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) ++/* ++ * must be called with the pinmux_lock held. ++ */ ++static int __crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) + { + int i; ++ ++ if (port > PORTS) ++ return -EINVAL; ++ ++ for (i = first_pin; i <= last_pin; i++) ++ pins[port][i] = pinmux_none; ++ ++ crisv32_pinmux_set(port); ++ ++ return 0; ++} ++ ++int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin) ++{ ++ int r; + unsigned long flags; + + crisv32_pinmux_init(); ++ ++ spin_lock_irqsave(&pinmux_lock, flags); ++ r = __crisv32_pinmux_dealloc(port, first_pin, last_pin); ++ spin_unlock_irqrestore(&pinmux_lock, flags); ++ return r; ++} + +- if (port > PORTS) +- return -EINVAL; ++int ++crisv32_pinmux_dealloc_fixed(enum fixed_function function) ++{ ++ int ret = -EINVAL; ++ char saved[sizeof pins]; ++ unsigned long flags; + + spin_lock_irqsave(&pinmux_lock, flags); + +- for (i = first_pin; i <= last_pin; i++) +- pins[port][i] = pinmux_none; ++ /* Save internal data for recovery */ ++ memcpy(saved, pins, sizeof pins); ++ ++ reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot); ++ ++ switch(function) ++ { ++ case pinmux_ser1: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 4, 7); ++ hwprot.ser1 = regk_pinmux_no; ++ break; ++ case pinmux_ser2: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 8, 11); ++ hwprot.ser2 = regk_pinmux_no; ++ break; ++ case pinmux_ser3: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 12, 15); ++ hwprot.ser3 = regk_pinmux_no; ++ break; ++ case pinmux_sser0: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 0, 3); ++ ret |= __crisv32_pinmux_dealloc(PORT_C, 16, 16); ++ hwprot.sser0 = regk_pinmux_no; ++ break; ++ case pinmux_sser1: ++ ret = __crisv32_pinmux_dealloc(PORT_D, 0, 4); ++ hwprot.sser1 = regk_pinmux_no; ++ break; ++ case pinmux_ata0: ++ ret = __crisv32_pinmux_dealloc(PORT_D, 5, 7); ++ ret |= __crisv32_pinmux_dealloc(PORT_D, 15, 17); ++ hwprot.ata0 = regk_pinmux_no; ++ break; ++ case pinmux_ata1: ++ ret = __crisv32_pinmux_dealloc(PORT_D, 0, 4); ++ ret |= __crisv32_pinmux_dealloc(PORT_E, 17, 17); ++ hwprot.ata1 = regk_pinmux_no; ++ break; ++ case pinmux_ata2: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 11, 15); ++ ret |= __crisv32_pinmux_dealloc(PORT_E, 3, 3); ++ hwprot.ata2 = regk_pinmux_no; ++ break; ++ case pinmux_ata3: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 8, 10); ++ ret |= __crisv32_pinmux_dealloc(PORT_C, 0, 2); ++ hwprot.ata2 = regk_pinmux_no; ++ break; ++ case pinmux_ata: ++ ret = __crisv32_pinmux_dealloc(PORT_B, 0, 15); ++ ret |= __crisv32_pinmux_dealloc(PORT_D, 8, 15); ++ hwprot.ata = regk_pinmux_no; ++ break; ++ case pinmux_eth1: ++ ret = __crisv32_pinmux_dealloc(PORT_E, 0, 17); ++ hwprot.eth1 = regk_pinmux_no; ++ hwprot.eth1_mgm = regk_pinmux_no; ++ break; ++ case pinmux_timer: ++ ret = __crisv32_pinmux_dealloc(PORT_C, 16, 16); ++ hwprot.timer = regk_pinmux_no; ++ spin_unlock_irqrestore(&pinmux_lock, flags); ++ return ret; ++ } ++ ++ if (!ret) ++ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot); ++ else ++ memcpy(pins, saved, sizeof pins); + +- crisv32_pinmux_set(port); + spin_unlock_irqrestore(&pinmux_lock, flags); +- +- return 0; ++ ++ return ret; + } + + void + crisv32_pinmux_dump(void) + { + int i, j; +- ++ + crisv32_pinmux_init(); + + for (i = 0; i < PORTS; i++) +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/process.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/process.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/process.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/process.c 2006-10-13 14:43:13.000000000 +0200 +@@ -74,9 +74,9 @@ + #else + { + reg_timer_rw_wd_ctrl wd_ctrl = {0}; +- ++ + stop_watchdog(); +- ++ + wd_ctrl.key = 16; /* Arbitrary key. */ + wd_ctrl.cnt = 1; /* Minimum time. */ + wd_ctrl.cmd = regk_timer_start; +@@ -141,7 +141,7 @@ + { + struct pt_regs *childregs; + struct switch_stack *swstack; +- ++ + /* + * Put the pt_regs structure at the end of the new kernel stack page and + * fix it up. Note: the task_struct doubles as the kernel stack for the +@@ -152,7 +152,7 @@ + p->set_child_tid = p->clear_child_tid = NULL; + childregs->r10 = 0; /* Child returns 0 after a fork/clone. */ + +- /* Set a new TLS ? ++ /* Set a new TLS ? + * The TLS is in $mof beacuse it is the 5th argument to sys_clone. + */ + if (p->mm && (clone_flags & CLONE_SETTLS)) { +@@ -165,20 +165,20 @@ + /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */ + swstack->r9 = 0; + +- /* ++ /* + * We want to return into ret_from_sys_call after the _resume. + * ret_from_fork will call ret_from_sys_call. + */ + swstack->return_ip = (unsigned long) ret_from_fork; +- ++ + /* Fix the user-mode and kernel-mode stackpointer. */ +- p->thread.usp = usp; ++ p->thread.usp = usp; + p->thread.ksp = (unsigned long) swstack; + + return 0; + } + +-/* ++/* + * Be aware of the "magic" 7th argument in the four system-calls below. + * They need the latest stackframe, which is put as the 7th argument by + * entry.S. The previous arguments are dummies or actually used, but need +@@ -200,7 +200,7 @@ + + /* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */ + asmlinkage int +-sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid, ++sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid, + unsigned long tls, long srp, struct pt_regs *regs) + { + if (!newusp) +@@ -209,11 +209,11 @@ + return do_fork(flags, newusp, regs, 0, parent_tid, child_tid); + } + +-/* ++/* + * vfork is a system call in i386 because of register-pressure - maybe + * we can remove it and handle it in libc but we put it here until then. + */ +-asmlinkage int ++asmlinkage int + sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp, + struct pt_regs *regs) + { +@@ -222,7 +222,7 @@ + + /* sys_execve() executes a new program. */ + asmlinkage int +-sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp, ++sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp, + struct pt_regs *regs) + { + int error; +@@ -254,13 +254,13 @@ + unsigned long usp = rdusp(); + printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", + regs->erp, regs->srp, regs->ccs, usp, regs->mof); +- ++ + printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", + regs->r0, regs->r1, regs->r2, regs->r3); +- ++ + printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", + regs->r4, regs->r5, regs->r6, regs->r7); +- ++ + printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", + regs->r8, regs->r9, regs->r10, regs->r11); + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/ptrace.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/ptrace.c 2006-03-22 10:56:56.000000000 +0100 +@@ -20,7 +20,7 @@ + #include <asm/processor.h> + #include <asm/arch/hwregs/supp_reg.h> + +-/* ++/* + * Determines which bits in CCS the user has access to. + * 1 = access, 0 = no access. + */ +@@ -84,7 +84,7 @@ + * + * Make sure the single step bit is not set. + */ +-void ++void + ptrace_disable(struct task_struct *child) + { + unsigned long tmp; +@@ -105,7 +105,7 @@ + unsigned long __user *datap = (unsigned long __user *)data; + + switch (request) { +- /* Read word at location address. */ ++ /* Read word at location address. */ + case PTRACE_PEEKTEXT: + case PTRACE_PEEKDATA: { + unsigned long tmp; +@@ -122,11 +122,11 @@ + tmp = *(unsigned long*)addr; + } else { + copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); +- ++ + if (copied != sizeof(tmp)) + break; + } +- ++ + ret = put_user(tmp,datap); + break; + } +@@ -143,18 +143,18 @@ + ret = put_user(tmp, datap); + break; + } +- ++ + /* Write the word at location address. */ + case PTRACE_POKETEXT: + case PTRACE_POKEDATA: + ret = 0; +- ++ + if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data)) + break; +- ++ + ret = -EIO; + break; +- ++ + /* Write the word at location address in the USER area. */ + case PTRACE_POKEUSR: + ret = -EIO; +@@ -178,10 +178,10 @@ + case PTRACE_SYSCALL: + case PTRACE_CONT: + ret = -EIO; +- ++ + if (!valid_signal(data)) + break; +- ++ + /* Continue means no single-step. */ + put_reg(child, PT_SPC, 0); + +@@ -198,27 +198,27 @@ + else { + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + } +- ++ + child->exit_code = data; +- ++ + /* TODO: make sure any pending breakpoint is killed */ + wake_up_process(child); + ret = 0; +- ++ + break; +- ++ + /* Make the child exit by sending it a sigkill. */ + case PTRACE_KILL: + ret = 0; +- ++ + if (child->exit_state == EXIT_ZOMBIE) + break; +- ++ + child->exit_code = SIGKILL; +- ++ + /* Deconfigure single-step and h/w bp. */ + ptrace_disable(child); +- ++ + /* TODO: make sure any pending breakpoint is killed */ + wake_up_process(child); + break; +@@ -227,7 +227,7 @@ + case PTRACE_SINGLESTEP: { + unsigned long tmp; + ret = -EIO; +- ++ + /* Set up SPC if not set already (in which case we have + no other choice but to trust it). */ + if (!get_reg(child, PT_SPC)) { +@@ -240,7 +240,7 @@ + + if (!valid_signal(data)) + break; +- ++ + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + + /* TODO: set some clever breakpoint mechanism... */ +@@ -259,15 +259,15 @@ + case PTRACE_GETREGS: { + int i; + unsigned long tmp; +- ++ + for (i = 0; i <= PT_MAX; i++) { + tmp = get_reg(child, i); +- ++ + if (put_user(tmp, datap)) { + ret = -EFAULT; + goto out_tsk; + } +- ++ + datap++; + } + +@@ -279,22 +279,22 @@ + case PTRACE_SETREGS: { + int i; + unsigned long tmp; +- ++ + for (i = 0; i <= PT_MAX; i++) { + if (get_user(tmp, datap)) { + ret = -EFAULT; + goto out_tsk; + } +- ++ + if (i == PT_CCS) { + tmp &= CCS_MASK; + tmp |= get_reg(child, PT_CCS) & ~CCS_MASK; + } +- ++ + put_reg(child, i, tmp); + datap++; + } +- ++ + ret = 0; + break; + } +@@ -304,6 +304,7 @@ + break; + } + ++out_tsk: + return ret; + } + +@@ -311,15 +312,15 @@ + { + if (!test_thread_flag(TIF_SYSCALL_TRACE)) + return; +- ++ + if (!(current->ptrace & PT_PTRACED)) + return; +- ++ + /* the 0x80 provides a way for the tracing parent to distinguish + between a syscall stop and SIGTRAP delivery */ + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) + ? 0x80 : 0)); +- ++ + /* + * This isn't the same as continuing with a signal, but it will do for + * normal use. +@@ -338,7 +339,7 @@ + int copied; + int opsize = 0; + +- /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */ ++ /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */ + copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0); + if (copied != sizeof(opcode)) + return 0; +@@ -361,7 +362,7 @@ + opsize = 6; + break; + default: +- panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n", ++ panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n", + opcode, pc); + } + +@@ -378,7 +379,7 @@ + /* Delay slot bit set. Report as stopped on proper + instruction. */ + if (spc) { +- /* Rely on SPC if set. FIXME: We might want to check ++ /* Rely on SPC if set. FIXME: We might want to check + that EXS indicates we stopped due to a single-step + exception. */ + pc = spc; +@@ -422,7 +423,7 @@ + register int old_srs; + + #ifdef CONFIG_ETRAX_KGDB +- /* Ignore write, but pretend it was ok if value is 0 ++ /* Ignore write, but pretend it was ok if value is 0 + (we don't want POKEUSR/SETREGS failing unnessecarily). */ + return (data == 0) ? ret : -1; + #endif +@@ -431,7 +432,7 @@ + if (!bp_owner) + bp_owner = pid; + else if (bp_owner != pid) { +- /* Ignore write, but pretend it was ok if value is 0 ++ /* Ignore write, but pretend it was ok if value is 0 + (we don't want POKEUSR/SETREGS failing unnessecarily). */ + return (data == 0) ? ret : -1; + } +@@ -440,7 +441,7 @@ + SPEC_REG_RD(SPEC_REG_SRS, old_srs); + /* Switch to BP bank. */ + SUPP_BANK_SEL(BANK_BP); +- ++ + switch (regno - PT_BP) { + case 0: + SUPP_REG_WR(0, data); break; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/setup.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/setup.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/setup.c 2006-10-13 14:43:13.000000000 +0200 +@@ -40,12 +40,12 @@ + + {"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB + | HAS_MMU | HAS_MMU_BUG}, +- ++ + {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB + | HAS_MMU}, +- ++ + {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU}, +- ++ + {"Unknown", 0, 0, 0} + }; + +@@ -67,7 +67,7 @@ + #endif + + revision = rdvr(); +- ++ + for (i = 0; i < entries; i++) { + if (cpinfo[i].rev == revision) { + info = &cpinfo[i]; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/signal.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/signal.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/signal.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/signal.c 2006-03-22 10:56:56.000000000 +0100 +@@ -50,7 +50,7 @@ + unsigned char retcode[8]; /* Trampoline code. */ + }; + +-int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs); ++void do_signal(int restart, struct pt_regs *regs); + void keep_debug_flags(unsigned long oldccs, unsigned long oldspc, + struct pt_regs *regs); + /* +@@ -61,74 +61,16 @@ + sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof, + long srp, struct pt_regs *regs) + { +- sigset_t saveset; +- + mask &= _BLOCKABLE; +- + spin_lock_irq(¤t->sighand->siglock); +- +- saveset = current->blocked; +- ++ current->saved_sigmask = current->blocked; + siginitset(¤t->blocked, mask); +- + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +- +- regs->r10 = -EINTR; +- +- while (1) { +- current->state = TASK_INTERRUPTIBLE; +- schedule(); +- +- if (do_signal(0, &saveset, regs)) { +- /* +- * This point is reached twice: once to call +- * the signal handler, then again to return +- * from the sigsuspend system call. When +- * calling the signal handler, R10 hold the +- * signal number as set by do_signal(). The +- * sigsuspend call will always return with +- * the restored value above; -EINTR. +- */ +- return regs->r10; +- } +- } +-} +- +-/* Define some dummy arguments to be able to reach the regs argument. */ +-int +-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13, +- long mof, long srp, struct pt_regs *regs) +-{ +- sigset_t saveset; +- sigset_t newset; +- +- if (sigsetsize != sizeof(sigset_t)) +- return -EINVAL; +- +- if (copy_from_user(&newset, unewset, sizeof(newset))) +- return -EFAULT; +- +- sigdelsetmask(&newset, ~_BLOCKABLE); +- spin_lock_irq(¤t->sighand->siglock); +- +- saveset = current->blocked; +- current->blocked = newset; +- +- recalc_sigpending(); +- spin_unlock_irq(¤t->sighand->siglock); +- +- regs->r10 = -EINTR; +- +- while (1) { +- current->state = TASK_INTERRUPTIBLE; +- schedule(); +- +- if (do_signal(0, &saveset, regs)) { +- /* See comment in function above. */ +- return regs->r10; +- } +- } ++ current->state = TASK_INTERRUPTIBLE; ++ schedule(); ++ set_thread_flag(TIF_RESTORE_SIGMASK); ++ return -ERESTARTNOHAND; + } + + int +@@ -263,7 +205,7 @@ + unsigned long oldccs = regs->ccs; + + frame = (struct rt_signal_frame *) rdusp(); +- ++ + /* + * Since the signal is stacked on a dword boundary, the frame + * should be dword aligned here as well. It it's not, then the +@@ -285,7 +227,7 @@ + + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +- ++ + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) + goto badframe; + +@@ -311,7 +253,7 @@ + + err = 0; + usp = rdusp(); +- ++ + /* + * Copy the registers. They are located first in sc, so it's + * possible to use sc directly. +@@ -351,7 +293,7 @@ + * which performs the syscall sigreturn(), or a provided user-mode + * trampoline. + */ +-static void ++static int + setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, + struct pt_regs * regs) + { +@@ -388,7 +330,7 @@ + /* Trampoline - the desired return ip is in the signal return page. */ + return_ip = cris_signal_return_page; + +- /* ++ /* + * This is movu.w __NR_sigreturn, r9; break 13; + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical +@@ -402,7 +344,7 @@ + + if (err) + goto give_sigsegv; +- ++ + /* + * Set up registers for signal handler. + * +@@ -417,16 +359,17 @@ + /* Actually move the USP to reflect the stacked frame. */ + wrusp((unsigned long)frame); + +- return; ++ return 0; + + give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; +- ++ + force_sig(SIGSEGV, current); ++ return -EFAULT; + } + +-static void ++static int + setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs * regs) + { +@@ -441,11 +384,11 @@ + goto give_sigsegv; + + /* TODO: what is the current->exec_domain stuff and invmap ? */ +- ++ + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); +- ++ + if (err) + goto give_sigsegv; + +@@ -467,7 +410,7 @@ + /* Trampoline - the desired return ip is in the signal return page. */ + return_ip = cris_signal_return_page + 6; + +- /* ++ /* + * This is movu.w __NR_rt_sigreturn, r9; break 13; + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical +@@ -478,7 +421,7 @@ + + err |= __put_user(__NR_rt_sigreturn, + (short __user*)(frame->retcode+2)); +- ++ + err |= __put_user(0xe93d, (short __user*)(frame->retcode+4)); + } + +@@ -503,21 +446,24 @@ + /* Actually move the usp to reflect the stacked frame. */ + wrusp((unsigned long)frame); + +- return; ++ return 0; + + give_sigsegv: + if (sig == SIGSEGV) + ka->sa.sa_handler = SIG_DFL; +- ++ + force_sig(SIGSEGV, current); ++ return -EFAULT; + } + + /* Invoke a singal handler to, well, handle the signal. */ +-static inline void ++static inline int + handle_signal(int canrestart, unsigned long sig, + siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) + { ++ int ret; ++ + /* Check if this got called from a system call. */ + if (canrestart) { + /* If so, check system call restarting. */ +@@ -561,19 +507,23 @@ + + /* Set up the stack frame. */ + if (ka->sa.sa_flags & SA_SIGINFO) +- setup_rt_frame(sig, ka, info, oldset, regs); ++ ret = setup_rt_frame(sig, ka, info, oldset, regs); + else +- setup_frame(sig, ka, oldset, regs); ++ ret = setup_frame(sig, ka, oldset, regs); + + if (ka->sa.sa_flags & SA_ONESHOT) + ka->sa.sa_handler = SIG_DFL; + +- spin_lock_irq(¤t->sighand->siglock); +- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); +- if (!(ka->sa.sa_flags & SA_NODEFER)) +- sigaddset(¤t->blocked,sig); +- recalc_sigpending(); +- spin_unlock_irq(¤t->sighand->siglock); ++ if (ret == 0) { ++ spin_lock_irq(¤t->sighand->siglock); ++ sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); ++ if (!(ka->sa.sa_flags & SA_NODEFER)) ++ sigaddset(¤t->blocked,sig); ++ recalc_sigpending(); ++ spin_unlock_irq(¤t->sighand->siglock); ++ } ++ ++ return ret; + } + + /* +@@ -587,12 +537,13 @@ + * we can use user_mode(regs) to see if we came directly from kernel or user + * mode below. + */ +-int +-do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs) ++void ++do_signal(int canrestart, struct pt_regs *regs) + { + int signr; + siginfo_t info; + struct k_sigaction ka; ++ sigset_t *oldset; + + /* + * The common case should go fast, which is why this point is +@@ -600,17 +551,27 @@ + * without doing anything. + */ + if (!user_mode(regs)) +- return 1; ++ return; + +- if (!oldset) ++ if (test_thread_flag(TIF_RESTORE_SIGMASK)) ++ oldset = ¤t->saved_sigmask; ++ else + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, NULL); +- ++ + if (signr > 0) { +- /* Deliver the signal. */ +- handle_signal(canrestart, signr, &info, &ka, oldset, regs); +- return 1; ++ /* Whee! Actually deliver the signal. */ ++ if (handle_signal(canrestart, signr, &info, &ka, oldset, regs)) { ++ /* a signal was successfully delivered; the saved ++ * sigmask will have been stored in the signal frame, ++ * and will be restored by sigreturn, so we can simply ++ * clear the TIF_RESTORE_SIGMASK flag */ ++ if (test_thread_flag(TIF_RESTORE_SIGMASK)) ++ clear_thread_flag(TIF_RESTORE_SIGMASK); ++ } ++ ++ return; + } + + /* Got here from a system call? */ +@@ -621,14 +582,19 @@ + regs->r10 == -ERESTARTNOINTR) { + RESTART_CRIS_SYS(regs); + } +- ++ + if (regs->r10 == -ERESTART_RESTARTBLOCK){ + regs->r10 = __NR_restart_syscall; + regs->erp -= 2; + } + } +- +- return 0; ++ ++ /* if there's no signal to deliver, we just put the saved sigmask ++ * back */ ++ if (test_thread_flag(TIF_RESTORE_SIGMASK)) { ++ clear_thread_flag(TIF_RESTORE_SIGMASK); ++ sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); ++ } + } + + asmlinkage void +@@ -651,7 +617,7 @@ + sys_kill(ti->task->pid, sig); + } + +-void ++void + keep_debug_flags(unsigned long oldccs, unsigned long oldspc, + struct pt_regs *regs) + { +@@ -666,7 +632,7 @@ + regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT)); + /* Assume the SPC is valid and interesting. */ + regs->spc = oldspc; +- ++ + } else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) { + /* If a h/w bp was set in the signal handler we need + to keep the S flag. */ +@@ -679,7 +645,7 @@ + have forgotten all about it. */ + regs->spc = 0; + regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT)); +- } ++ } + } + + /* Set up the trampolines on the signal return page. */ +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/smp.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/smp.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/smp.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/smp.c 2007-01-09 10:29:19.000000000 +0100 +@@ -20,6 +20,7 @@ + #define IPI_SCHEDULE 1 + #define IPI_CALL 2 + #define IPI_FLUSH_TLB 4 ++#define IPI_BOOT 8 + + #define FLUSH_ALL (void*)0xffffffff + +@@ -30,6 +31,8 @@ + cpumask_t cpu_online_map = CPU_MASK_NONE; + EXPORT_SYMBOL(cpu_online_map); + cpumask_t phys_cpu_present_map = CPU_MASK_NONE; ++cpumask_t cpu_possible_map; ++EXPORT_SYMBOL(cpu_possible_map); + EXPORT_SYMBOL(phys_cpu_present_map); + + /* Variables used during SMP boot */ +@@ -55,7 +58,7 @@ + extern int setup_irq(int, struct irqaction *); + + /* Mode registers */ +-static unsigned long irq_regs[NR_CPUS] = ++static unsigned long irq_regs[NR_CPUS] = + { + regi_irq, + regi_irq2 +@@ -97,6 +100,7 @@ + + cpu_set(0, cpu_online_map); + cpu_set(0, phys_cpu_present_map); ++ cpu_set(0, cpu_possible_map); + } + + void __init smp_cpus_done(unsigned int max_cpus) +@@ -109,6 +113,7 @@ + { + unsigned timeout; + struct task_struct *idle; ++ cpumask_t cpu_mask = CPU_MASK_NONE; + + idle = fork_idle(cpuid); + if (IS_ERR(idle)) +@@ -120,6 +125,12 @@ + smp_init_current_idle_thread = task_thread_info(idle); + cpu_now_booting = cpuid; + ++ /* Kick it */ ++ cpu_set(cpuid, cpu_online_map); ++ cpu_set(cpuid, cpu_mask); ++ send_ipi(IPI_BOOT, 0, cpu_mask); ++ cpu_clear(cpuid, cpu_online_map); ++ + /* Wait for CPU to come online */ + for (timeout = 0; timeout < 10000; timeout++) { + if(cpu_online(cpuid)) { +@@ -142,7 +153,7 @@ + * specific stuff such as the local timer and the MMU. */ + void __init smp_callin(void) + { +- extern void cpu_idle(void); ++ extern void cpu_idle(void); + + int cpu = cpu_now_booting; + reg_intr_vect_rw_mask vect_mask = {0}; +@@ -190,8 +201,8 @@ + + /* cache_decay_ticks is used by the scheduler to decide if a process + * is "hot" on one CPU. A higher value means a higher penalty to move +- * a process to another CPU. Our cache is rather small so we report +- * 1 tick. ++ * a process to another CPU. Our cache is rather small so we report ++ * 1 tick. + */ + unsigned long cache_decay_ticks = 1; + +@@ -205,14 +216,14 @@ + { + cpumask_t cpu_mask = CPU_MASK_NONE; + cpu_set(cpu, cpu_mask); +- send_ipi(IPI_SCHEDULE, 0, cpu_mask); ++ send_ipi(IPI_SCHEDULE, 0, cpu_mask); + } + + /* TLB flushing + * + * Flush needs to be done on the local CPU and on any other CPU that + * may have the same mapping. The mm->cpu_vm_mask is used to keep track +- * of which CPUs that a specific process has been executed on. ++ * of which CPUs that a specific process has been executed on. + */ + void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr) + { +@@ -244,7 +255,7 @@ + cpu_set(smp_processor_id(), mm->cpu_vm_mask); + } + +-void flush_tlb_page(struct vm_area_struct *vma, ++void flush_tlb_page(struct vm_area_struct *vma, + unsigned long addr) + { + __flush_tlb_page(vma, addr); +@@ -252,8 +263,8 @@ + } + + /* Inter processor interrupts +- * +- * The IPIs are used for: ++ * ++ * The IPIs are used for: + * * Force a schedule on a CPU + * * FLush TLB on other CPUs + * * Call a function on other CPUs +@@ -341,7 +352,7 @@ + else if (flush_vma == FLUSH_ALL) + __flush_tlb_mm(flush_mm); + else +- __flush_tlb_page(flush_vma, flush_addr); ++ __flush_tlb_page(flush_vma, flush_addr); + } + + ipi.vector = 0; +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/time.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/time.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/time.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/time.c 2007-01-09 10:29:19.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $ ++/* $Id: time.c,v 1.25 2007/01/09 09:29:19 starvik Exp $ + * + * linux/arch/cris/arch-v32/kernel/time.c + * +@@ -14,12 +14,14 @@ + #include <linux/sched.h> + #include <linux/init.h> + #include <linux/threads.h> ++#include <linux/cpufreq.h> + #include <asm/types.h> + #include <asm/signal.h> + #include <asm/io.h> + #include <asm/delay.h> + #include <asm/rtc.h> + #include <asm/irq.h> ++#include <asm/irq_regs.h> + + #include <asm/arch/hwregs/reg_map.h> + #include <asm/arch/hwregs/reg_rdwr.h> +@@ -31,7 +33,7 @@ + #define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */ + #define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */ + +-unsigned long timer_regs[NR_CPUS] = ++unsigned long timer_regs[NR_CPUS] = + { + regi_timer, + #ifdef CONFIG_SMP +@@ -44,6 +46,15 @@ + extern int setup_irq(int, struct irqaction *); + extern int have_rtc; + ++#ifdef CONFIG_CPU_FREQ ++static int ++cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, void *data); ++ ++static struct notifier_block cris_time_freq_notifier_block = { ++ .notifier_call = cris_time_freq_notifier ++}; ++#endif ++ + unsigned long get_ns_in_jiffie(void) + { + reg_timer_r_tmr0_data data; +@@ -63,7 +74,7 @@ + static unsigned long jiffies_p = 0; + + /* +- * cache volatile jiffies temporarily; we have IRQs turned off. ++ * cache volatile jiffies temporarily; we have IRQs turned off. + */ + unsigned long jiffies_t; + +@@ -82,7 +93,7 @@ + */ + if( jiffies_t == jiffies_p ) { + if( count > count_p ) { +- /* Timer wrapped, use new count and prescale ++ /* Timer wrapped, use new count and prescale + * increase the time corresponding to one jiffie + */ + usec_count = 1000000/HZ; +@@ -101,7 +112,7 @@ + * The watchdog timer is an 8-bit timer with a configurable start value. + * Once started the whatchdog counts downwards with a frequency of 763 Hz + * (100/131072 MHz). When the watchdog counts down to 1, it generates an +- * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the ++ * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the + * chip. + */ + /* This gives us 1.3 ms to do something useful when the NMI comes */ +@@ -124,7 +135,7 @@ + { + #if defined(CONFIG_ETRAX_WATCHDOG) + reg_timer_rw_wd_ctrl wd_ctrl = { 0 }; +- ++ + /* only keep watchdog happy as long as we have memory left! */ + if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) { + /* reset the watchdog with the inverse of the old key */ +@@ -139,7 +150,7 @@ + + /* stop the watchdog - we still need the correct key */ + +-void ++void + stop_watchdog(void) + { + #if defined(CONFIG_ETRAX_WATCHDOG) +@@ -149,7 +160,7 @@ + wd_ctrl.cmd = regk_timer_stop; + wd_ctrl.key = watchdog_key; + REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl); +-#endif ++#endif + } + + extern void show_registers(struct pt_regs *regs); +@@ -160,7 +171,8 @@ + #if defined(CONFIG_ETRAX_WATCHDOG) + extern int cause_of_death; + +- raw_printk("Watchdog bite\n"); ++ oops_in_progress = 1; ++ printk("Watchdog bite\n"); + + /* Check if forced restart or unexpected watchdog */ + if (cause_of_death == 0xbedead) { +@@ -169,8 +181,9 @@ + + /* Unexpected watchdog, stop the watchdog and dump registers*/ + stop_watchdog(); +- raw_printk("Oops: bitten by watchdog\n"); +- show_registers(regs); ++ printk("Oops: bitten by watchdog\n"); ++ show_registers(regs); ++ oops_in_progress = 0; + #ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + reset_watchdog(); + #endif +@@ -191,8 +204,9 @@ + extern void cris_do_profile(struct pt_regs *regs); + + static inline irqreturn_t +-timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++timer_interrupt(int irq, void *dev_id) + { ++ struct pt_regs* regs = get_irq_regs(); + int cpu = smp_processor_id(); + reg_timer_r_masked_intr masked_intr; + reg_timer_rw_ack_intr ack_intr = { 0 }; +@@ -226,7 +240,7 @@ + * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + * +- * The division here is not time critical since it will run once in ++ * The division here is not time critical since it will run once in + * 11 minutes + */ + if ((time_status & STA_UNSYNC) == 0 && +@@ -246,7 +260,7 @@ + */ + + static struct irqaction irq_timer = { +- .mask = timer_interrupt, ++ .handler = timer_interrupt, + .flags = IRQF_SHARED | IRQF_DISABLED, + .mask = CPU_MASK_NONE, + .name = "timer" +@@ -262,7 +276,7 @@ + + /* Setup the etrax timers + * Base frequency is 100MHz, divider 1000000 -> 100 HZ +- * We use timer0, so timer1 is free. ++ * We use timer0, so timer1 is free. + * The trig timer is used by the fasttimer API if enabled. + */ + +@@ -284,11 +298,11 @@ + { + reg_intr_vect_rw_mask intr_mask; + +- /* probe for the RTC and read it if it exists +- * Before the RTC can be probed the loops_per_usec variable needs +- * to be initialized to make usleep work. A better value for +- * loops_per_usec is calculated by the kernel later once the +- * clock has started. ++ /* probe for the RTC and read it if it exists ++ * Before the RTC can be probed the loops_per_usec variable needs ++ * to be initialized to make usleep work. A better value for ++ * loops_per_usec is calculated by the kernel later once the ++ * clock has started. + */ + loops_per_usec = 50; + +@@ -297,7 +311,7 @@ + xtime.tv_sec = 0; + xtime.tv_nsec = 0; + have_rtc = 0; +- } else { ++ } else { + /* get the current time */ + have_rtc = 1; + update_xtime_from_cmos(); +@@ -316,9 +330,9 @@ + intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); + intr_mask.timer = 1; + REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); +- ++ + /* now actually register the timer irq handler that calls timer_interrupt() */ +- ++ + setup_irq(TIMER_INTR_VECT, &irq_timer); + + /* enable watchdog if we should use one */ +@@ -330,10 +344,7 @@ + /* If we use the hardware watchdog, we want to trap it as an NMI + and dump registers before it resets us. For this to happen, we + must set the "m" NMI enable flag (which once set, is unset only +- when an NMI is taken). +- +- The same goes for the external NMI, but that doesn't have any +- driver or infrastructure support yet. */ ++ when an NMI is taken). */ + { + unsigned long flags; + local_save_flags(flags); +@@ -341,4 +352,27 @@ + local_irq_restore(flags); + } + #endif ++ ++#ifdef CONFIG_CPU_FREQ ++ cpufreq_register_notifier(&cris_time_freq_notifier_block, ++ CPUFREQ_TRANSITION_NOTIFIER); ++#endif ++} ++ ++#ifdef CONFIG_CPU_FREQ ++static int ++cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, void *data) ++{ ++ struct cpufreq_freqs *freqs = data; ++ if (val == CPUFREQ_POSTCHANGE) { ++ reg_timer_r_tmr0_data data; ++ reg_timer_rw_tmr0_div div = (freqs->new * 500) / HZ; ++ do ++ { ++ data = REG_RD(timer, timer_regs[freqs->cpu], r_tmr0_data); ++ } while (data > 20); ++ REG_WR(timer, timer_regs[freqs->cpu], rw_tmr0_div, div); ++ } ++ return 0; + } ++#endif +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/traps.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/traps.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/traps.c 2006-12-11 14:04:24.000000000 +0100 +@@ -1,50 +1,43 @@ + /* +- * Copyright (C) 2003, Axis Communications AB. ++ * Copyright (C) 2003-2006, Axis Communications AB. + */ + + #include <linux/ptrace.h> + #include <asm/uaccess.h> +- + #include <asm/arch/hwregs/supp_reg.h> +- +-extern void reset_watchdog(void); +-extern void stop_watchdog(void); +- +-extern int raw_printk(const char *fmt, ...); ++#include <asm/arch/hwregs/intr_vect_defs.h> + + void + show_registers(struct pt_regs *regs) + { + /* + * It's possible to use either the USP register or current->thread.usp. +- * USP might not correspond to the current proccess for all cases this ++ * USP might not correspond to the current process for all cases this + * function is called, and current->thread.usp isn't up to date for the +- * current proccess. Experience shows that using USP is the way to go. ++ * current process. Experience shows that using USP is the way to go. + */ +- unsigned long usp; ++ unsigned long usp = rdusp(); + unsigned long d_mmu_cause; + unsigned long i_mmu_cause; + +- usp = rdusp(); ++ printk("CPU: %d\n", smp_processor_id()); + +- raw_printk("CPU: %d\n", smp_processor_id()); ++ printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", ++ regs->erp, regs->srp, regs->ccs, usp, regs->mof); + +- raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", +- regs->erp, regs->srp, regs->ccs, usp, regs->mof); ++ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", ++ regs->r0, regs->r1, regs->r2, regs->r3); + +- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", +- regs->r0, regs->r1, regs->r2, regs->r3); ++ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", ++ regs->r4, regs->r5, regs->r6, regs->r7); + +- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", +- regs->r4, regs->r5, regs->r6, regs->r7); ++ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", ++ regs->r8, regs->r9, regs->r10, regs->r11); + +- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", +- regs->r8, regs->r9, regs->r10, regs->r11); ++ printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", ++ regs->r12, regs->r13, regs->orig_r10, regs->acr); + +- raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", +- regs->r12, regs->r13, regs->orig_r10, regs->acr); +- +- raw_printk("sp: %08lx\n", regs); ++ printk(" sp: %08lx\n", (unsigned long)regs); + + SUPP_BANK_SEL(BANK_IM); + SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause); +@@ -52,18 +45,20 @@ + SUPP_BANK_SEL(BANK_DM); + SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause); + +- raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause); +- raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); ++ printk(" Data MMU Cause: %08lx\n", d_mmu_cause); ++ printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); + +- raw_printk("Process %s (pid: %d, stackpage: %08lx)\n", +- current->comm, current->pid, (unsigned long) current); ++ printk("Process %s (pid: %d, stackpage=%08lx)\n", ++ current->comm, current->pid, (unsigned long)current); + +- /* Show additional info if in kernel-mode. */ ++ /* ++ * When in-kernel, we also print out the stack and code at the ++ * time of the fault.. ++ */ + if (!user_mode(regs)) { + int i; +- unsigned char c; + +- show_stack(NULL, (unsigned long *) usp); ++ show_stack(NULL, (unsigned long *)usp); + + /* + * If the previous stack-dump wasn't a kernel one, dump the +@@ -72,7 +67,7 @@ + if (usp != 0) + show_stack(NULL, NULL); + +- raw_printk("\nCode: "); ++ printk("\nCode: "); + + if (regs->erp < PAGE_OFFSET) + goto bad_value; +@@ -84,76 +79,65 @@ + * instruction decoding should be in sync at the interesting + * point, but small enough to fit on a row. The regs->erp + * location is pointed out in a ksymoops-friendly way by +- * wrapping the byte for that address in parenthesis. ++ * wrapping the byte for that address in parenthesises. + */ + for (i = -12; i < 12; i++) { +- if (__get_user(c, &((unsigned char *) regs->erp)[i])) { ++ unsigned char c; ++ ++ if (__get_user(c, &((unsigned char *)regs->erp)[i])) { + bad_value: +- raw_printk(" Bad IP value."); ++ printk(" Bad IP value."); + break; + } + + if (i == 0) +- raw_printk("(%02x) ", c); ++ printk("(%02x) ", c); + else +- raw_printk("%02x ", c); ++ printk("%02x ", c); + } +- +- raw_printk("\n"); ++ printk("\n"); + } + } + +-/* +- * This gets called from entry.S when the watchdog has bitten. Show something +- * similiar to an Oops dump, and if the kernel if configured to be a nice doggy; +- * halt instead of reboot. +- */ + void +-watchdog_bite_hook(struct pt_regs *regs) ++arch_enable_nmi(void) + { +-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY +- local_irq_disable(); +- stop_watchdog(); +- show_registers(regs); +- +- while (1) +- ; /* Do nothing. */ +-#else +- show_registers(regs); +-#endif ++ unsigned long flags; ++ ++ local_save_flags(flags); ++ flags |= (1 << 30); /* NMI M flag is at bit 30 */ ++ local_irq_restore(flags); + } + +-/* This is normally the Oops function. */ +-void +-die_if_kernel(const char *str, struct pt_regs *regs, long err) ++extern void (*nmi_handler)(struct pt_regs*); ++void handle_nmi(struct pt_regs* regs) + { +- if (user_mode(regs)) +- return; ++ reg_intr_vect_r_nmi r; + +-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY +- /* +- * This printout might take too long and could trigger +- * the watchdog normally. If NICE_DOGGY is set, simply +- * stop the watchdog during the printout. +- */ +- stop_watchdog(); +-#endif +- +- raw_printk("%s: %04lx\n", str, err & 0xffff); ++ if (nmi_handler) ++ nmi_handler(regs); + +- show_registers(regs); +- +-#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY +- reset_watchdog(); +-#endif +- +- do_exit(SIGSEGV); ++ /* Wait until nmi is no longer active. */ ++ do { ++ r = REG_RD(intr_vect, regi_irq, r_nmi); ++ } while (r.ext == regk_intr_vect_on); + } + +-void arch_enable_nmi(void) ++#ifdef CONFIG_DEBUG_BUGVERBOSE ++void ++handle_BUG(struct pt_regs *regs) + { +- unsigned long flags; +- local_save_flags(flags); +- flags |= (1<<30); /* NMI M flag is at bit 30 */ +- local_irq_restore(flags); ++ struct bug_frame f; ++ unsigned char c; ++ unsigned long erp = regs->erp; ++ ++ if (__copy_from_user(&f, (const void __user *)(erp - 8), sizeof f)) ++ return; ++ if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC) ++ return; ++ if (__get_user(c, f.filename)) ++ f.filename = "<bad filename>"; ++ ++ printk("kernel BUG at %s:%d!\n", f.filename, f.line); + } ++#endif +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.c 1970-01-01 01:00:00.000000000 +0100 +@@ -1,96 +0,0 @@ +-// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $ +-// +-// Call simulator hook. This is the part running in the +-// simulated program. +-// +- +-#include "vcs_hook.h" +-#include <stdarg.h> +-#include <asm/arch-v32/hwregs/reg_map.h> +-#include <asm/arch-v32/hwregs/intr_vect_defs.h> +- +-#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */ +-#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */ +- +-#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset] +-#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset] +-#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0) +-#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset] +- +- +-// ------------------------------------------------------------------ hook_call +-int hook_call( unsigned id, unsigned pcnt, ...) { +- va_list ap; +- unsigned i; +- unsigned ret; +-#ifdef USING_SOS +- PREEMPT_OFF_SAVE(); +-#endif +- +- // pass parameters +- HOOK_DATA(0) = id; +- +- /* Have to make hook_print_str a special case since we call with a +- parameter of byte type. Should perhaps be a separate +- hook_call. */ +- +- if (id == hook_print_str) { +- int i; +- char *str; +- +- HOOK_DATA(1) = pcnt; +- +- va_start(ap, pcnt); +- str = (char*)va_arg(ap,unsigned); +- +- for (i=0; i!=pcnt; i++) { +- HOOK_DATA_BYTE(8+i) = str[i]; +- } +- HOOK_DATA_BYTE(8+i) = 0; /* null byte */ +- } +- else { +- va_start(ap, pcnt); +- for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned); +- va_end(ap); +- } +- +- // read from mem to make sure data has propagated to memory before trigging +- *((volatile unsigned*) HOOK_MEM_BASE_ADDR); +- +- // trigger hook +- HOOK_TRIG(id); +- +- // wait for call to finish +- while( VHOOK_DATA(0) > 0 ) {} +- +- // extract return value +- +- ret = VHOOK_DATA(1); +- +-#ifdef USING_SOS +- PREEMPT_RESTORE(); +-#endif +- return ret; +-} +- +-unsigned +-hook_buf(unsigned i) +-{ +- return (HOOK_DATA(i)); +-} +- +-void print_str( const char *str ) { +- int i; +- for (i=1; str[i]; i++); /* find null at end of string */ +- hook_call(hook_print_str, i, str); +-} +- +-// --------------------------------------------------------------- CPU_KICK_DOG +-void CPU_KICK_DOG(void) { +- (void) hook_call( hook_kick_dog, 0 ); +-} +- +-// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT +-void CPU_WATCHDOG_TIMEOUT( unsigned t ) { +- (void) hook_call( hook_dog_timeout, 1, t ); +-} +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.h linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.h +--- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,42 +0,0 @@ +-// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $ +-// +-// Call simulator hook functions +- +-#ifndef HOOK_H +-#define HOOK_H +- +-int hook_call( unsigned id, unsigned pcnt, ...); +- +-enum hook_ids { +- hook_debug_on = 1, +- hook_debug_off, +- hook_stop_sim_ok, +- hook_stop_sim_fail, +- hook_alloc_shared, +- hook_ptr_shared, +- hook_free_shared, +- hook_file2shared, +- hook_cmp_shared, +- hook_print_params, +- hook_sim_time, +- hook_stop_sim, +- hook_kick_dog, +- hook_dog_timeout, +- hook_rand, +- hook_srand, +- hook_rand_range, +- hook_print_str, +- hook_print_hex, +- hook_cmp_offset_shared, +- hook_fill_random_shared, +- hook_alloc_random_data, +- hook_calloc_random_data, +- hook_print_int, +- hook_print_uint, +- hook_fputc, +- hook_init_fd, +- hook_sbrk +- +-}; +- +-#endif +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/lib/Makefile +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/Makefile 2006-10-11 19:29:20.000000000 +0200 +@@ -2,5 +2,5 @@ + # Makefile for Etrax-specific library files.. + # + +-lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o ++lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o delay.o + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksum.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksum.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksum.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksum.S 2005-08-15 15:53:12.000000000 +0200 +@@ -7,15 +7,15 @@ + + .globl csum_partial + csum_partial: +- ++ + ;; r10 - src + ;; r11 - length + ;; r12 - checksum + + ;; check for breakeven length between movem and normal word looping versions +- ;; we also do _NOT_ want to compute a checksum over more than the ++ ;; we also do _NOT_ want to compute a checksum over more than the + ;; actual length when length < 40 +- ++ + cmpu.w 80,$r11 + blo _word_loop + nop +@@ -24,17 +24,17 @@ + ;; this overhead is why we have a check above for breakeven length + ;; only r0 - r8 have to be saved, the other ones are clobber-able + ;; according to the ABI +- ++ + subq 9*4,$sp + subq 10*4,$r11 ; update length for the first loop + movem $r8,[$sp] +- ++ + ;; do a movem checksum + + _mloop: movem [$r10+],$r9 ; read 10 longwords + + ;; perform dword checksumming on the 10 longwords +- ++ + add.d $r0,$r12 + addc $r1,$r12 + addc $r2,$r12 +@@ -48,9 +48,8 @@ + + ;; fold the carry into the checksum, to avoid having to loop the carry + ;; back into the top +- ++ + addc 0,$r12 +- addc 0,$r12 ; do it again, since we might have generated a carry + + subq 10*4,$r11 + bge _mloop +@@ -68,34 +67,30 @@ + + ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below. + ;; r9 and r13 can be used as temporaries. +- ++ + moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9 + lsrq 16,$r9 +- ++ + move.d $r12,$r13 + lsrq 16,$r13 ; r13 = checksum >> 16 + and.d $r9,$r12 ; checksum = checksum & 0xffff + add.d $r13,$r12 ; checksum += r13 +- move.d $r12,$r13 ; do the same again, maybe we got a carry last add +- lsrq 16,$r13 +- and.d $r9,$r12 +- add.d $r13,$r12 + + _no_fold: + cmpq 2,$r11 + blt _no_words + nop +- ++ + ;; checksum the rest of the words +- ++ + subq 2,$r11 +- ++ + _wloop: subq 2,$r11 + bge _wloop + addu.w [$r10+],$r12 +- ++ + addq 2,$r11 +- ++ + _no_words: + ;; see if we have one odd byte more + cmpq 1,$r11 +@@ -104,7 +99,7 @@ + ret + move.d $r12,$r10 + +-_do_byte: ++_do_byte: + ;; copy and checksum the last byte + addu.b [$r10],$r12 + ret +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksumcopy.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksumcopy.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksumcopy.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksumcopy.S 2005-08-15 15:53:12.000000000 +0200 +@@ -3,23 +3,23 @@ + * Copyright (c) 1998, 2001, 2003 Axis Communications AB + * + * Authors: Bjorn Wesen +- * ++ * + * csum_partial_copy_nocheck(const char *src, char *dst, + * int len, unsigned int sum) + */ + + .globl csum_partial_copy_nocheck +-csum_partial_copy_nocheck: +- ++csum_partial_copy_nocheck: ++ + ;; r10 - src + ;; r11 - dst + ;; r12 - length + ;; r13 - checksum + + ;; check for breakeven length between movem and normal word looping versions +- ;; we also do _NOT_ want to compute a checksum over more than the ++ ;; we also do _NOT_ want to compute a checksum over more than the + ;; actual length when length < 40 +- ++ + cmpu.w 80,$r12 + blo _word_loop + nop +@@ -28,19 +28,19 @@ + ;; this overhead is why we have a check above for breakeven length + ;; only r0 - r8 have to be saved, the other ones are clobber-able + ;; according to the ABI +- ++ + subq 9*4,$sp + subq 10*4,$r12 ; update length for the first loop + movem $r8,[$sp] +- ++ + ;; do a movem copy and checksum +- ++ + 1: ;; A failing userspace access (the read) will have this as PC. + _mloop: movem [$r10+],$r9 ; read 10 longwords + movem $r9,[$r11+] ; write 10 longwords + + ;; perform dword checksumming on the 10 longwords +- ++ + add.d $r0,$r13 + addc $r1,$r13 + addc $r2,$r13 +@@ -54,9 +54,8 @@ + + ;; fold the carry into the checksum, to avoid having to loop the carry + ;; back into the top +- ++ + addc 0,$r13 +- addc 0,$r13 ; do it again, since we might have generated a carry + + subq 10*4,$r12 + bge _mloop +@@ -74,34 +73,30 @@ + + ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below + ;; r9 can be used as temporary. +- ++ + move.d $r13,$r9 + lsrq 16,$r9 ; r0 = checksum >> 16 + and.d 0xffff,$r13 ; checksum = checksum & 0xffff + add.d $r9,$r13 ; checksum += r0 +- move.d $r13,$r9 ; do the same again, maybe we got a carry last add +- lsrq 16,$r9 +- and.d 0xffff,$r13 +- add.d $r9,$r13 +- ++ + _no_fold: + cmpq 2,$r12 + blt _no_words + nop +- ++ + ;; copy and checksum the rest of the words +- ++ + subq 2,$r12 +- ++ + 2: ;; A failing userspace access for the read below will have this as PC. + _wloop: move.w [$r10+],$r9 + addu.w $r9,$r13 + subq 2,$r12 + bge _wloop + move.w $r9,[$r11+] +- ++ + addq 2,$r12 +- ++ + _no_words: + ;; see if we have one odd byte more + cmpq 1,$r12 +@@ -110,7 +105,7 @@ + ret + move.d $r13,$r10 + +-_do_byte: ++_do_byte: + ;; copy and checksum the last byte + 3: ;; A failing userspace access for the read below will have this as PC. + move.b [$r10],$r9 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/delay.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/delay.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/delay.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/delay.c 2006-10-16 01:08:41.000000000 +0200 +@@ -0,0 +1,28 @@ ++/* ++ * Precise Delay Loops for ETRAX FS ++ * ++ * Copyright (C) 2006 Axis Communications AB. ++ * ++ */ ++ ++#include <asm/arch/hwregs/reg_map.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/timer_defs.h> ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/module.h> ++ ++/* ++ * On ETRAX FS, we can check the free-running read-only 100MHz timer ++ * getting 32-bit 10ns precision, theoretically good for 42.94967295 ++ * seconds. Unsigned arithmetic and careful expression handles ++ * wrapping. ++ */ ++ ++void cris_delay10ns(u32 n10ns) ++{ ++ u32 t0 = REG_RD(timer, regi_timer, r_time); ++ while (REG_RD(timer, regi_timer, r_time) - t0 < n10ns) ++ ; ++} ++EXPORT_SYMBOL(cris_delay10ns); +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/dram_init.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/dram_init.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/dram_init.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/dram_init.S 2006-11-28 11:06:19.000000000 +0100 +@@ -1,14 +1,14 @@ +-/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $ +- * ++/* $Id: dram_init.S,v 1.9 2006/11/28 10:06:19 ricardw Exp $ ++ * + * DRAM/SDRAM initialization - alter with care + * This file is intended to be included from other assembler files + * +- * Note: This file may not modify r8 or r9 because they are used to +- * carry information from the decompresser to the kernel ++ * Note: This file may not modify r8 .. r12 because they are used to ++ * carry information from the decompressor to the kernel + * + * Copyright (C) 2000-2003 Axis Communications AB + * +- * Authors: Mikael Starvik (starvik@axis.com) ++ * Authors: Mikael Starvik (starvik@axis.com) + */ + + /* Just to be certain the config file is included, we include it here +@@ -18,13 +18,13 @@ + + #include <asm/arch/hwregs/asm/reg_map_asm.h> + #include <asm/arch/hwregs/asm/bif_core_defs_asm.h> +- +- ;; WARNING! The registers r8 and r9 are used as parameters carrying +- ;; information from the decompressor (if the kernel was compressed). ++ ++ ;; WARNING! The registers r8 .. r12 are used as parameters carrying ++ ;; information from the decompressor (if the kernel was compressed). + ;; They should not be used in the code below. + + ; Refer to BIF MDS for a description of SDRAM initialization +- ++ + ; Bank configuration + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0), $r0 + move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1 +@@ -33,7 +33,7 @@ + move.d CONFIG_ETRAX_SDRAM_GRP1_CONFIG, $r1 + move.d $r1, [$r0] + +- ; Calculate value of mrs_data ++ ; Calculate value of mrs_data + ; CAS latency = 2 && bus_width = 32 => 0x40 + ; CAS latency = 3 && bus_width = 32 => 0x60 + ; CAS latency = 2 && bus_width = 16 => 0x20 +@@ -43,7 +43,7 @@ + move.d CONFIG_ETRAX_SDRAM_COMMAND, $r2 + bne _set_timing + nop +- ++ + move.d 0x40, $r4 ; Assume 32 bits and CAS latency = 2 + move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 + and.d 0x07, $r1 ; Get CAS latency +@@ -51,7 +51,7 @@ + beq _bw_check + nop + move.d 0x60, $r4 +- ++ + _bw_check: + ; Assume that group 0 width is equal to group 1. This assumption + ; is wrong for a group 1 only hardware (such as the grand old +@@ -67,23 +67,27 @@ + move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 + and.d ~(3 << reg_bif_core_rw_sdram_timing___ref___lsb), $r1 + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0 +- move.d $r1, [$r0] ++ move.d $r1, [$r0] ++ ++ ; Wait 200us ++ move.d 10000, $r2 ++1: bne 1b ++ subq 1, $r2 + + ; Issue NOP command + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd), $r5 + moveq regk_bif_core_nop, $r1 + move.d $r1, [$r5] +- ++ + ; Wait 200us + move.d 10000, $r2 + 1: bne 1b + subq 1, $r2 +- ++ + ; Issue initialization command sequence +- move.d _sdram_commands_start, $r2 +- and.d 0x000fffff, $r2 ; Make sure commands are read from flash +- move.d _sdram_commands_end, $r3 +- and.d 0x000fffff, $r3 ++ lapc.d _sdram_commands_start, $r2 ; position-independent ++ lapc.d _sdram_commands_end, $r3 ; position-independent ++ + 1: clear.d $r6 + move.b [$r2+], $r6 ; Load command + or.d $r4, $r6 ; Add calculated mrs +@@ -100,7 +104,7 @@ + move.d CONFIG_ETRAX_SDRAM_TIMING, $r1 + move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0 + move.d $r1, [$r0] +- ++ + ; Initialization finished + ba _sdram_commands_end + nop +@@ -116,4 +120,4 @@ + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_ref ; refresh + .byte regk_bif_core_mrs ; mrs +-_sdram_commands_end: ++_sdram_commands_end: +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/hw_settings.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/hw_settings.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/hw_settings.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/hw_settings.S 2006-10-13 14:43:15.000000000 +0200 +@@ -1,25 +1,25 @@ + /* +- * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $ +- * ++ * $Id: hw_settings.S,v 1.5 2006/10/13 12:43:15 starvik Exp $ ++ * + * This table is used by some tools to extract hardware parameters. + * The table should be included in the kernel and the decompressor. + * Don't forget to update the tools if you change this table. + * + * Copyright (C) 2001 Axis Communications AB + * +- * Authors: Mikael Starvik (starvik@axis.com) ++ * Authors: Mikael Starvik (starvik@axis.com) + */ + + #include <asm/arch/hwregs/asm/reg_map_asm.h> + #include <asm/arch/hwregs/asm/bif_core_defs_asm.h> + #include <asm/arch/hwregs/asm/gio_defs_asm.h> +- ++ + .ascii "HW_PARAM_MAGIC" ; Magic number + .dword 0xc0004000 ; Kernel start address + + ; Debug port + #ifdef CONFIG_ETRAX_DEBUG_PORT0 +- .dword 0 ++ .dword 0 + #elif defined(CONFIG_ETRAX_DEBUG_PORT1) + .dword 1 + #elif defined(CONFIG_ETRAX_DEBUG_PORT2) +@@ -28,9 +28,9 @@ + .dword 3 + #else + .dword 4 ; No debug +-#endif ++#endif + +- ; Register values ++ ; Register values + .dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg) + .dword CONFIG_ETRAX_MEM_GRP1_CONFIG + .dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg) +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/memset.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/memset.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/memset.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/memset.c 2003-07-02 05:00:14.000000000 +0200 +@@ -66,7 +66,7 @@ + + { + register char *dst __asm__ ("r13") = pdst; +- ++ + /* This is NONPORTABLE, but since this whole routine is */ + /* grossly nonportable that doesn't matter. */ + +@@ -156,7 +156,7 @@ + } + + /* Either we directly starts copying, using dword copying +- in a loop, or we copy as much as possible with 'movem' ++ in a loop, or we copy as much as possible with 'movem' + and then the last block (<44 bytes) is copied here. + This will work since 'movem' will have updated src,dst,n. */ + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/nand_init.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/nand_init.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/nand_init.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/nand_init.S 2007-01-31 16:52:19.000000000 +0100 +@@ -9,14 +9,16 @@ + ## + ## Some notes about the bug/feature for future reference: + ## The bootrom copies the first 127 KB from NAND flash to internal +-## memory. The problem is that it does a bytewise copy. NAND flashes +-## does autoincrement on the address so for a 16-bite device each +-## read/write increases the address by two. So the copy loop in the ++## memory. The problem is that it does a bytewise copy, copying ++## a single byte from the lowest byte of the bus for each address. ++## NAND flashes autoincrement on the address so for a 16 bit device ++## each read/write increases the address by two. So the copy loop in the + ## bootrom will discard every second byte. This is solved by inserting +-## zeroes in every second byte in the first erase block. ++## zeroes in every second byte in the first erase block, in order ++## to get contiguous code. + ## + ## The bootrom also incorrectly assumes that it can read the flash +-## linear with only one read command but the flash will actually ++## linearly with only one read command but the flash will actually + ## switch between normal area and spare area if you do that so we + ## can't trust more than the first 256 bytes. + ## +@@ -29,14 +31,16 @@ + #include <asm/arch/hwregs/asm/config_defs_asm.h> + + ;; There are 8-bit NAND flashes and 16-bit NAND flashes. +-;; We need to treat them slightly different. +-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 +-#define PAGE_SIZE 256 ++;; We need to treat them slightly differently. ++#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 ++#define PAGE_SIZE_ADDRESSES 256 + #else +-#error 2 +-#define PAGE_SIZE 512 ++#define PAGE_SIZE_ADDRESSES 512 + #endif ++ ++;; Block size for erase + #define ERASE_BLOCK 16384 ++#define PAGE_SIZE_BYTES 512 + + ;; GPIO pins connected to NAND flash + #define CE 4 +@@ -49,6 +53,7 @@ + #define NAND_WR_ADDR 0x94000000 + + #define READ_CMD 0x00 ++#define RESET_CMD 0xFF + + ;; Readability macros + #define CSP_MASK \ +@@ -58,6 +63,10 @@ + REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \ + REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr) + ++;; Normally we initialize GPIO and bus interfaces. ++;; This is strictly not necessary; boot ROM does this for us. ++#define INTERFACE_SETUP (1) ++ + ;;---------------------------------------------------------------------------- + ;; Macros to set/clear GPIO bits + +@@ -71,16 +80,41 @@ + move.d $r9, [$r2] + .endm + ++.macro GPIO_SYNC ++;; Originally, we read back data written to nand flash in order ++;; to flush the pipeline. It turned out however, that the real ++;; culprit was a lack of wait states. ++;; This macro remains in the code however in case this conclusion ++;; is wrong too. ++;; ++;; move.d [$r2], $r9 ; read back to flush pipeline ++.endm ++ + ;;---------------------------------------------------------------------------- ++;; Read value from bus to temporary register to sync with previous write ++;; This generates no signal to the NAND flash, since only chip select lines are ++;; pulled out to the chip, and read is not gated with chip select for the write ++;; area. + +-nand_boot: +- ;; Check if nand boot was selected +- move.d REG_ADDR(config, regi_config, r_bootsel), $r0 +- move.d [$r0], $r0 +- and.d REG_MASK(config, r_bootsel, boot_mode), $r0 +- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0 +- bne normal_boot ; No NAND boot +- nop ++.macro BUS_SYNC r ++ move.b [$r1], \r ++.endm ++ ++;;---------------------------------------------------------------------------- ++;; Delay macro ++;; x = delay = 10*x + 20 ns, e.g. DELAY 25 => 270ns delay, max 63 (650 ns) ++;;(@200Mc) ++;; r is temp reg used ++;; Macro currently not used, save for a rainy day. ++ ++.macro DELAY x, r ++ clear.d \r ++ addq (\x),\r ; addq zero-extends its argument ++7: bne 7b ++ subq 1, \r ++.endm ++ ++;;---------------------------------------------------------------------------- + + copy_nand_to_ram: + ;; copy_nand_to_ram +@@ -88,7 +122,6 @@ + ;; r10 - destination + ;; r11 - source offset + ;; r12 - size +- ;; r13 - Address to jump to after completion + ;; Note : r10-r12 are clobbered on return + ;; Registers used: + ;; r0 - NAND_RD_ADDR +@@ -96,83 +129,99 @@ + ;; r2 - reg_gio_rw_pa_dout + ;; r3 - reg_gio_r_pa_din + ;; r4 - tmp +- ;; r5 - byte counter within a page +- ;; r6 - reg_pinmux_rw_pa +- ;; r7 - reg_gio_rw_pa_oe +- ;; r8 - reg_bif_core_rw_grp3_cfg ++ ;; r5 - byte counter within a page / tmp2 ++ ;; r6 - r_bootsel masked w/ 0x18 ++ ;; r7 - n/u ++ ;; r8 - n/u + ;; r9 - reg_gio_rw_pa_dout shadow +- move.d 0x90000000, $r0 +- move.d 0x94000000, $r1 ++ move.d NAND_RD_ADDR, $r0 ++ move.d NAND_WR_ADDR, $r1 + move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2 + move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3 +- move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6 +- move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7 +- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8 + +-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 ++#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 + lsrq 1, $r11 + #endif ++ ++#if INTERFACE_SETUP ++ ;; Set up pinmux ++ move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r5 ++ move.d [$r5], $r4 ++ or.b 0xf0, $r4 ; bits 4,5,6,7 ++ move.d $r4, [$r5] ++ + ;; Set up GPIO +- move.d [$r2], $r9 +- move.d [$r7], $r4 ++ move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r5 ++ move.d [$r5], $r4 + or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4 +- move.d $r4, [$r7] ++ move.d $r4, [$r5] + ++#endif + ;; Set up bif +- move.d [$r8], $r4 +- and.d CSP_MASK, $r4 ++ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r5 ++ move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r4 ; wait states ++ and.d ~CSP_MASK, $r4 + or.d CSP_VAL, $r4 +- move.d $r4, [$r8] ++ move.d $r4, [$r5] ++ ++ move.d [$r2], $r9 ; fetch PA DOUT to shadow register ++ ++ ;; figure out how many address cycles the flash needs ++ move.d REG_ADDR(config, regi_config, r_bootsel), $r5 ++ move.d [$r5], $r6 ++ andq 0x18, $r6 ; mask out bs3,4 (00=>3, 08=>4, 18=>5 cycles) + + 1: ;; Copy one page + CLR CE + SET CLE ++ GPIO_SYNC + moveq READ_CMD, $r4 + move.b $r4, [$r1] +- moveq 20, $r4 +-2: bne 2b +- subq 1, $r4 ++ BUS_SYNC $r4 + CLR CLE + SET ALE +- clear.w [$r1] ; Column address = 0 +- move.d $r11, $r4 ++ GPIO_SYNC ++ clear.b [$r1] ; Column address = 0 ++ move.d $r11, $r4 ; Address ++ lsrq 9, $r4 ; Row address is A9 and up ++ move.b $r4, [$r1] ; Row address byte #0 + lsrq 8, $r4 +- move.b $r4, [$r1] ; Row address ++ cmpq 0x08, $r6 ; 8 => Z, 0 => C, 18h => NZ,NC ++ bcs 4f ; C (3 cycles) => jump ++ move.b $r4, [$r1] ; Row address byte #1 (DELAY SLOT) (no flagset) ++ beq 3f ; Z (4 cycles) => jump ++ lsrq 8, $r4 ; (DELAY SLOT) ++ move.b $r4, [$r1] ; Row address byte #2 (5 cyc only) + lsrq 8, $r4 +- move.b $r4, [$r1] ; Row adddress +- moveq 20, $r4 +-2: bne 2b +- subq 1, $r4 ++3: ++ move.b $r4, [$r1] ; Row address byte #3 (5 cyc) or #2 (4 cyc) ++4: ++ BUS_SYNC $r4 + CLR ALE ++ GPIO_SYNC ++ + 2: move.d [$r3], $r4 + and.d 1 << BY, $r4 + beq 2b +- movu.w PAGE_SIZE, $r5 ++ nop ++ movu.w PAGE_SIZE_ADDRESSES, $r5 + 2: ; Copy one byte/word +-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 ++#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 + move.w [$r0], $r4 + #else + move.b [$r0], $r4 + #endif + subq 1, $r5 + bne 2b +-#if CONFIG_ETRAX_FLASH_BUSWIDTH==2 ++#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2 + move.w $r4, [$r10+] +- subu.w PAGE_SIZE*2, $r12 + #else + move.b $r4, [$r10+] +- subu.w PAGE_SIZE, $r12 + #endif +- bpl 1b +- addu.w PAGE_SIZE, $r11 ++ subu.w PAGE_SIZE_BYTES, $r12 ++ bhi 1b ++ addu.w PAGE_SIZE_ADDRESSES, $r11 + +- ;; End of copy +- jump $r13 +- nop ++ SET CE + +- ;; This will warn if the code above is too large. If you consider +- ;; to remove this you don't understand the bug/feature. +- .org 256 +- .org ERASE_BLOCK +- +-normal_boot: ++ ;; End of copy +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/spinlock.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/spinlock.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/spinlock.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/spinlock.S 2006-05-24 11:38:43.000000000 +0200 +@@ -1,22 +1,22 @@ + ;; Core of the spinlock implementation + ;; +-;; Copyright (C) 2004 Axis Communications AB. ++;; Copyright (C) 2004 Axis Communications AB. + ;; +-;; Author: Mikael Starvik +- ++;; Author: Mikael Starvik + ++ + .global cris_spin_lock + .global cris_spin_trylock + + .text +- ++ + cris_spin_lock: + clearf p +-1: test.d [$r10] ++1: test.b [$r10] + beq 1b + clearf p + ax +- clear.d [$r10] ++ clear.b [$r10] + bcs 1b + clearf p + ret +@@ -24,10 +24,10 @@ + + cris_spin_trylock: + clearf p +-1: move.d [$r10], $r11 ++1: move.b [$r10], $r11 + ax +- clear.d [$r10] ++ clear.b [$r10] + bcs 1b + clearf p + ret +- move.d $r11,$r10 ++ movu.b $r11,$r10 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/string.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/string.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/lib/string.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/string.c 2003-07-02 05:00:14.000000000 +0200 +@@ -48,8 +48,8 @@ + register char *dst __asm__ ("r13") = pdst; + register const char *src __asm__ ("r11") = psrc; + register int n __asm__ ("r12") = pn; +- +- ++ ++ + /* When src is aligned but not dst, this makes a few extra needless + cycles. I believe it would take as many to check that the + re-alignment was unnecessary. */ +@@ -117,13 +117,13 @@ + ;; Restore registers from stack \n\ + movem [$sp+],$r10" + +- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) ++ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) + /* Inputs */ : "0" (dst), "1" (src), "2" (n)); +- ++ + } + + /* Either we directly starts copying, using dword copying +- in a loop, or we copy as much as possible with 'movem' ++ in a loop, or we copy as much as possible with 'movem' + and then the last block (<44 bytes) is copied here. + This will work since 'movem' will have updated src,dst,n. */ + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/init.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/init.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/mm/init.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/init.c 2006-10-13 14:43:14.000000000 +0200 +@@ -34,12 +34,12 @@ + unsigned long mmu_kbase_hi; + unsigned long mmu_kbase_lo; + unsigned short mmu_page_id; +- +- /* ++ ++ /* + * Make sure the current pgd table points to something sane, even if it + * is most probably not used until the next switch_mm. + */ +- per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; ++ per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd; + + #ifdef CONFIG_SMP + { +@@ -65,7 +65,7 @@ + REG_STATE(mmu, rw_mm_cfg, seg_d, page) | + REG_STATE(mmu, rw_mm_cfg, seg_c, linear) | + REG_STATE(mmu, rw_mm_cfg, seg_b, linear) | +-#ifndef CONFIG_ETRAXFS_SIM ++#ifndef CONFIG_ETRAXFS_SIM + REG_STATE(mmu, rw_mm_cfg, seg_a, page) | + #else + REG_STATE(mmu, rw_mm_cfg, seg_a, linear) | +@@ -115,7 +115,7 @@ + SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi); + SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo); + SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id); +- ++ + /* Update the data MMU. */ + SUPP_BANK_SEL(BANK_DM); + SUPP_REG_WR(RW_MM_CFG, mmu_config); +@@ -125,7 +125,7 @@ + + SPEC_REG_WR(SPEC_REG_PID, 0); + +- /* ++ /* + * The MMU has been enabled ever since head.S but just to make it + * totally obvious enable it here as well. + */ +@@ -133,7 +133,7 @@ + SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */ + } + +-void __init ++void __init + paging_init(void) + { + int i; +@@ -160,13 +160,13 @@ + for (i = 1; i < MAX_NR_ZONES; i++) + zones_size[i] = 0; + +- /* ++ /* + * Use free_area_init_node instead of free_area_init, because it is +- * designed for systems where the DRAM starts at an address ++ * designed for systems where the DRAM starts at an address + * substantially higher than 0, like us (we start at PAGE_OFFSET). This + * saves space in the mem_map page array. + */ + free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0); +- ++ + mem_map = contig_page_data.node_mem_map; + } +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/intmem.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/intmem.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/mm/intmem.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/intmem.c 2006-01-02 12:27:04.000000000 +0100 +@@ -27,7 +27,7 @@ + { + static int initiated = 0; + if (!initiated) { +- struct intmem_allocation* alloc = ++ struct intmem_allocation* alloc = + (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL); + INIT_LIST_HEAD(&intmem_allocations); + intmem_virtual = ioremap(MEM_INTMEM_START, MEM_INTMEM_SIZE); +@@ -44,7 +44,7 @@ + struct intmem_allocation* allocation; + struct intmem_allocation* tmp; + void* ret = NULL; +- ++ + preempt_disable(); + crisv32_intmem_init(); + +@@ -55,7 +55,7 @@ + if (allocation->status == STATUS_FREE && + allocation->size >= size + alignment) { + if (allocation->size > size + alignment) { +- struct intmem_allocation* alloc = ++ struct intmem_allocation* alloc = + (struct intmem_allocation*) + kmalloc(sizeof *alloc, GFP_ATOMIC); + alloc->status = STATUS_FREE; +@@ -73,13 +73,13 @@ + allocation->offset += alignment; + list_add_tail(&tmp->entry, &allocation->entry); + } +- } ++ } + allocation->status = STATUS_ALLOCATED; + allocation->size = size; + ret = (void*)((int)intmem_virtual + allocation->offset); + } + } +- preempt_enable(); ++ preempt_enable(); + return ret; + } + +@@ -96,22 +96,22 @@ + + list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) { + if (allocation->offset == (int)(addr - intmem_virtual)) { +- struct intmem_allocation* prev = +- list_entry(allocation->entry.prev, ++ struct intmem_allocation* prev = ++ list_entry(allocation->entry.prev, + struct intmem_allocation, entry); +- struct intmem_allocation* next = +- list_entry(allocation->entry.next, ++ struct intmem_allocation* next = ++ list_entry(allocation->entry.next, + struct intmem_allocation, entry); + + allocation->status = STATUS_FREE; + /* Join with prev and/or next if also free */ +- if (prev->status == STATUS_FREE) { ++ if ((prev != &intmem_allocations) && (prev->status == STATUS_FREE)) { + prev->size += allocation->size; + list_del(&allocation->entry); + kfree(allocation); + allocation = prev; + } +- if (next->status == STATUS_FREE) { ++ if ((next != &intmem_allocations) && (next->status == STATUS_FREE)) { + allocation->size += next->size; + list_del(&next->entry); + kfree(next); +@@ -125,13 +125,13 @@ + + void* crisv32_intmem_phys_to_virt(unsigned long addr) + { +- return (void*)(addr - MEM_INTMEM_START+ ++ return (void*)(addr - MEM_INTMEM_START+ + (unsigned long)intmem_virtual); + } + + unsigned long crisv32_intmem_virt_to_phys(void* addr) + { +- return (unsigned long)((unsigned long )addr - ++ return (unsigned long)((unsigned long )addr - + (unsigned long)intmem_virtual + MEM_INTMEM_START); + } + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/mmu.S linux-2.6.19.2.dev/arch/cris/arch-v32/mm/mmu.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/mm/mmu.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/mmu.S 2006-08-04 10:10:20.000000000 +0200 +@@ -1,3 +1,5 @@ ++; WARNING : The refill handler has been modified, see below !!! ++ + /* + * Copyright (C) 2003 Axis Communications AB + * +@@ -9,7 +11,7 @@ + + #include <asm/page.h> + #include <asm/pgtable.h> +- ++ + ; Save all register. Must save in same order as struct pt_regs. + .macro SAVE_ALL + subq 12, $sp +@@ -29,11 +31,11 @@ + subq 14*4, $sp + movem $r13, [$sp] + subq 4, $sp +- move.d $r10, [$sp] ++ move.d $r10, [$sp] + .endm + + ; Bus fault handler. Extracts relevant information and calls mm subsystem +-; to handle the fault. ++; to handle the fault. + .macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex + .globl \handler + \handler: +@@ -45,7 +47,7 @@ + orq \ex << 1, $r13 ; execute? + move $s3, $r10 ; rw_mm_cause + and.d ~8191, $r10 ; Get faulting page start address +- ++ + jsr do_page_fault + nop + ba ret_from_intr +@@ -59,15 +61,28 @@ + ; The code below handles case 1 and calls the mm subsystem for case 2 and 3. + ; Do not touch this code without very good reasons and extensive testing. + ; Note that the code is optimized to minimize stalls (makes the code harder +-; to read). ++; to read). ++; ++; WARNING !!! ++; Modified by Mikael Asker 060725: added a workaround for strange TLB ++; behavior. If the same PTE is present in more than one set, the TLB ++; doesn't recognize it and we get stuck in a loop of refill exceptions. ++; The workaround detects such loops and exits them by flushing ++; the TLB contents. The problem and workaround were verified ++; in VCS by Mikael Starvik. + ; + ; Each page is 8 KB. Each PMD holds 8192/4 PTEs (each PTE is 4 bytes) so each +-; PMD holds 16 MB of virtual memory. ++; PMD holds 16 MB of virtual memory. + ; Bits 0-12 : Offset within a page + ; Bits 13-23 : PTE offset within a PMD + ; Bits 24-31 : PMD offset within the PGD +- ++ + .macro MMU_REFILL_HANDLER handler, mmu ++ .data ++1: .dword 0 ; refill_count ++ ; == 0 <=> last_refill_cause is invalid ++2: .dword 0 ; last_refill_cause ++ .text + .globl \handler + \handler: + subq 4, $sp +@@ -76,40 +91,88 @@ + subq 4, $sp + move \mmu, $srs ; Select MMU support register bank + move.d $acr, [$sp] +- subq 4, $sp +- move.d $r0, [$sp] +-#ifdef CONFIG_SMP ++ subq 12, $sp ++ move.d 1b, $acr ; Point to refill_count ++ movem $r2, [$sp] ++ ++ test.d [$acr] ; refill_count == 0 ? ++ beq 5f ; yes, last_refill_cause is invalid ++ move.d $acr, $r1 ++ ++ ; last_refill_cause is valid, investigate cause ++ addq 4, $r1 ; Point to last_refill_cause ++ move $s3, $r0 ; Get rw_mm_cause ++ move.d [$r1], $r2 ; Get last_refill_cause ++ cmp.d $r0, $r2 ; rw_mm_cause == last_refill_cause ? ++ beq 6f ; yes, increment count ++ moveq 1, $r2 ++ ++ ; rw_mm_cause != last_refill_cause ++ move.d $r2, [$acr] ; refill_count = 1 ++ move.d $r0, [$r1] ; last_refill_cause = rw_mm_cause ++ ++3: ; Probably not in a loop, continue normal processing ++#ifdef CONFIG_SMP + move $s7, $acr ; PGD + #else + move.d per_cpu__current_pgd, $acr ; PGD + #endif + ; Look up PMD in PGD +- move $s3, $r0 ; rw_mm_cause + lsrq 24, $r0 ; Get PMD index into PGD (bit 24-31) + move.d [$acr], $acr ; PGD for the current process + addi $r0.d, $acr, $acr + move $s3, $r0 ; rw_mm_cause + move.d [$acr], $acr ; Get PMD +- beq 1f ++ beq 8f + ; Look up PTE in PMD + lsrq PAGE_SHIFT, $r0 + and.w PAGE_MASK, $acr ; Remove PMD flags + and.d 0x7ff, $r0 ; Get PTE index into PMD (bit 13-23) + addi $r0.d, $acr, $acr + move.d [$acr], $acr ; Get PTE +- beq 2f +- move.d [$sp+], $r0 ; Pop r0 in delayslot ++ beq 9f ++ movem [$sp], $r2 ; Restore r0-r2 in delay slot ++ addq 12, $sp + ; Store in TLB + move $acr, $s5 +- ; Return ++4: ; Return + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp + rete + rfe +-1: ; PMD missing, let the mm subsystem fix it up. +- move.d [$sp+], $r0 ; Pop r0 +-2: ; PTE missing, let the mm subsystem fix it up. ++ ++5: ; last_refill_cause is invalid ++ moveq 1, $r2 ++ addq 4, $r1 ; Point to last_refill_cause ++ move.d $r2, [$acr] ; refill_count = 1 ++ move $s3, $r0 ; Get rw_mm_cause ++ ba 3b ; Continue normal processing ++ move.d $r0,[$r1] ; last_refill_cause = rw_mm_cause ++ ++6: ; rw_mm_cause == last_refill_cause ++ move.d [$acr], $r2 ; Get refill_count ++ cmpq 4, $r2 ; refill_count > 4 ? ++ bhi 7f ; yes ++ addq 1, $r2 ; refill_count++ ++ ba 3b ; Continue normal processing ++ move.d $r2, [$acr] ++ ++7: ; refill_count > 4, error ++ subq 4, $sp ++ move $srp, [$sp] ++ jsr __flush_tlb_all ++ move.d $acr, $r0 ; Save pointer to refill_count ++ move [$sp+], $srp ++ clear.d [$r0] ; refill_count = 0 ++ movem [$sp], $r2 ++ ba 4b ; Return ++ addq 12, $sp ++ ++8: ; PMD missing, let the mm subsystem fix it up. ++ movem [$sp], $r2 ; Restore r0-r2 ++9: ; PTE missing, let the mm subsystem fix it up. ++ addq 12, $sp + move.d [$sp+], $acr + move [$sp], $srs + addq 4, $sp +@@ -128,7 +191,7 @@ + ba ret_from_intr + nop + .endm +- ++ + ; This is the MMU bus fault handlers. + + MMU_REFILL_HANDLER i_mmu_refill, 1 +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/tlb.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/tlb.c +--- linux-2.6.19.2.old/arch/cris/arch-v32/mm/tlb.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/tlb.c 2006-08-07 12:06:44.000000000 +0200 +@@ -2,7 +2,7 @@ + * Low level TLB handling. + * + * Copyright (C) 2000-2003, Axis Communications AB. +- * ++ * + * Authors: Bjorn Wesen <bjornw@axis.com> + * Tobias Anderberg <tobiasa@axis.com>, CRISv32 port. + */ +@@ -79,7 +79,7 @@ + void + __flush_tlb_mm(struct mm_struct *mm) + { +- int i; ++ int i; + int mmu; + unsigned long flags; + unsigned long page_id; +@@ -90,7 +90,7 @@ + + if (page_id == NO_CONTEXT) + return; +- ++ + /* Mark the TLB entries that match the page_id as invalid. */ + local_save_flags(flags); + local_irq_disable(); +@@ -99,15 +99,15 @@ + SUPP_BANK_SEL(mmu); + for (i = 0; i < NUM_TLB_ENTRIES; i++) { + UPDATE_TLB_SEL_IDX(i); +- ++ + /* Get the page_id */ + SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi); + + /* Check if the page_id match. */ + if ((tlb_hi & 0xff) == page_id) { + mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid, +- INVALID_PAGEID) +- | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, ++ INVALID_PAGEID) ++ | REG_FIELD(mmu, rw_mm_tlb_hi, vpn, + i & 0xf)); + + UPDATE_TLB_HILO(mmu_tlb_hi, 0); +@@ -135,7 +135,7 @@ + return; + + addr &= PAGE_MASK; +- ++ + /* + * Invalidate those TLB entries that match both the mm context and the + * requested virtual address. +@@ -150,11 +150,11 @@ + SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi); + + /* Check if page_id and address matches */ +- if (((tlb_hi & 0xff) == page_id) && ++ if (((tlb_hi & 0xff) == page_id) && + ((tlb_hi & PAGE_MASK) == addr)) { + mmu_tlb_hi = REG_FIELD(mmu, rw_mm_tlb_hi, pid, + INVALID_PAGEID) | addr; +- ++ + UPDATE_TLB_HILO(mmu_tlb_hi, 0); + } + } +@@ -178,33 +178,35 @@ + static DEFINE_SPINLOCK(mmu_context_lock); + + /* Called in schedule() just before actually doing the switch_to. */ +-void ++void + switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +-{ +- int cpu = smp_processor_id(); +- +- /* Make sure there is a MMU context. */ +- spin_lock(&mmu_context_lock); +- get_mmu_context(next); +- cpu_set(cpu, next->cpu_vm_mask); +- spin_unlock(&mmu_context_lock); +- +- /* +- * Remember the pgd for the fault handlers. Keep a seperate copy of it +- * because current and active_mm might be invalid at points where +- * there's still a need to derefer the pgd. +- */ +- per_cpu(current_pgd, cpu) = next->pgd; +- +- /* Switch context in the MMU. */ +- if (tsk && task_thread_info(tsk)) +- { +- SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls); +- } +- else +- { +- SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); +- } ++{ ++ if (prev != next) { ++ int cpu = smp_processor_id(); ++ ++ /* Make sure there is a MMU context. */ ++ spin_lock(&mmu_context_lock); ++ get_mmu_context(next); ++ cpu_set(cpu, next->cpu_vm_mask); ++ spin_unlock(&mmu_context_lock); ++ ++ /* ++ * Remember the pgd for the fault handlers. Keep a seperate copy of it ++ * because current and active_mm might be invalid at points where ++ * there's still a need to derefer the pgd. ++ */ ++ per_cpu(current_pgd, cpu) = next->pgd; ++ ++ /* Switch context in the MMU. */ ++ if (tsk && task_thread_info(tsk)) ++ { ++ SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls); ++ } ++ else ++ { ++ SPEC_REG_WR(SPEC_REG_PID, next->context.page_id); ++ } ++ } + } + +diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/vmlinux.lds.S linux-2.6.19.2.dev/arch/cris/arch-v32/vmlinux.lds.S +--- linux-2.6.19.2.old/arch/cris/arch-v32/vmlinux.lds.S 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/arch-v32/vmlinux.lds.S 2006-10-13 14:43:11.000000000 +0200 +@@ -5,11 +5,11 @@ + * script. It is for example quite vital that all generated sections + * that are used are actually named here, otherwise the linker will + * put them at the end, where the init stuff is which is FREED after +- * the kernel has booted. +- */ ++ * the kernel has booted. ++ */ + + #include <asm-generic/vmlinux.lds.h> +- ++ + jiffies = jiffies_64; + SECTIONS + { +@@ -20,7 +20,7 @@ + /* The boot section is only necessary until the VCS top level testbench */ + /* includes both flash and DRAM. */ + .boot : { *(.boot) } +- ++ + . = DRAM_VIRTUAL_BASE + 0x4000; /* See head.S and pages reserved at the start. */ + + _text = .; /* Text and read-only data. */ +@@ -35,7 +35,7 @@ + *(.text.__*) + } + +- _etext = . ; /* End of text section. */ ++ _etext = . ; /* End of text section. */ + __etext = .; + + . = ALIGN(4); /* Exception table. */ +@@ -59,7 +59,7 @@ + + . = ALIGN(8192); /* Init code and data. */ + __init_begin = .; +- .init.text : { ++ .init.text : { + _sinittext = .; + *(.init.text) + _einittext = .; +@@ -81,7 +81,7 @@ + *(.initcall5.init); + *(.initcall6.init); + *(.initcall7.init); +- __initcall_end = .; ++ __initcall_end = .; + } + + .con_initcall.init : { +@@ -94,20 +94,20 @@ + __per_cpu_start = .; + .data.percpu : { *(.data.percpu) } + __per_cpu_end = .; +- ++ + .init.ramfs : { + __initramfs_start = .; + *(.init.ramfs) + __initramfs_end = .; +- /* ++ /* + * We fill to the next page, so we can discard all init + * pages without needing to consider what payload might be + * appended to the kernel image. + */ +- FILL (0); ++ FILL (0); + . = ALIGN (8192); + } +- ++ + __vmlinux_end = .; /* Last address of the physical file. */ + __init_end = .; + +diff -urN linux-2.6.19.2.old/arch/cris/kernel/crisksyms.c linux-2.6.19.2.dev/arch/cris/kernel/crisksyms.c +--- linux-2.6.19.2.old/arch/cris/kernel/crisksyms.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/crisksyms.c 2006-11-03 13:49:17.000000000 +0100 +@@ -9,7 +9,7 @@ + #include <linux/kernel.h> + #include <linux/string.h> + #include <linux/tty.h> +- ++ + #include <asm/semaphore.h> + #include <asm/processor.h> + #include <asm/uaccess.h> +@@ -28,6 +28,7 @@ + extern void __ashldi3(void); + extern void __ashrdi3(void); + extern void __lshrdi3(void); ++extern void __negdi2(void); + extern void iounmap(volatile void * __iomem); + + /* Platform dependent support */ +@@ -35,18 +36,7 @@ + EXPORT_SYMBOL(get_cmos_time); + EXPORT_SYMBOL(loops_per_usec); + +-/* String functions */ +-EXPORT_SYMBOL(memcmp); +-EXPORT_SYMBOL(memmove); +-EXPORT_SYMBOL(strstr); +-EXPORT_SYMBOL(strcpy); +-EXPORT_SYMBOL(strchr); +-EXPORT_SYMBOL(strcmp); +-EXPORT_SYMBOL(strlen); +-EXPORT_SYMBOL(strcat); +-EXPORT_SYMBOL(strncat); +-EXPORT_SYMBOL(strncmp); +-EXPORT_SYMBOL(strncpy); ++EXPORT_SYMBOL(ktime_get_ts); + + /* Math functions */ + EXPORT_SYMBOL(__Udiv); +@@ -56,6 +46,7 @@ + EXPORT_SYMBOL(__ashldi3); + EXPORT_SYMBOL(__ashrdi3); + EXPORT_SYMBOL(__lshrdi3); ++EXPORT_SYMBOL(__negdi2); + + /* Memory functions */ + EXPORT_SYMBOL(__ioremap); +@@ -85,4 +76,4 @@ + EXPORT_SYMBOL(del_fast_timer); + EXPORT_SYMBOL(schedule_usleep); + #endif +- ++EXPORT_SYMBOL(csum_partial); +diff -urN linux-2.6.19.2.old/arch/cris/kernel/irq.c linux-2.6.19.2.dev/arch/cris/kernel/irq.c +--- linux-2.6.19.2.old/arch/cris/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/irq.c 2007-01-09 10:29:20.000000000 +0100 +@@ -92,14 +92,16 @@ + asmlinkage void do_IRQ(int irq, struct pt_regs * regs) + { + unsigned long sp; ++ struct pt_regs *old_regs = set_irq_regs(regs); + irq_enter(); + sp = rdsp(); + if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) { + printk("do_IRQ: stack overflow: %lX\n", sp); + show_stack(NULL, (unsigned long *)sp); + } +- __do_IRQ(irq, regs); ++ __do_IRQ(irq); + irq_exit(); ++ set_irq_regs(old_regs); + } + + void weird_irq(void) +diff -urN linux-2.6.19.2.old/arch/cris/kernel/process.c linux-2.6.19.2.dev/arch/cris/kernel/process.c +--- linux-2.6.19.2.old/arch/cris/kernel/process.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/process.c 2006-06-25 17:00:10.000000000 +0200 +@@ -1,4 +1,4 @@ +-/* $Id: process.c,v 1.21 2005/03/04 08:16:17 starvik Exp $ ++/* $Id: process.c,v 1.26 2006/06/25 15:00:10 starvik Exp $ + * + * linux/arch/cris/kernel/process.c + * +@@ -8,6 +8,21 @@ + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * $Log: process.c,v $ ++ * Revision 1.26 2006/06/25 15:00:10 starvik ++ * Merge of Linux 2.6.17 ++ * ++ * Revision 1.25 2006/03/22 09:56:56 starvik ++ * Merge of Linux 2.6.16 ++ * ++ * Revision 1.24 2006/01/04 06:09:48 starvik ++ * Merge of Linux 2.6.15 ++ * ++ * Revision 1.23 2005/08/29 07:32:19 starvik ++ * Merge of 2.6.13 ++ * ++ * Revision 1.22 2005/08/18 08:33:18 starvik ++ * Corrected signature of machine_restart ++ * + * Revision 1.21 2005/03/04 08:16:17 starvik + * Merge of Linux 2.6.11. + * +@@ -195,12 +210,18 @@ + */ + void (*pm_idle)(void); + ++extern void default_idle(void); ++ ++void (*pm_power_off)(void); ++EXPORT_SYMBOL(pm_power_off); ++ + /* + * The idle thread. There's no useful work to be + * done, so just try to conserve power and have a + * low exit latency (ie sit in a loop waiting for + * somebody to say that they'd like to reschedule) + */ ++ + void cpu_idle (void) + { + /* endless idle loop with no priority at all */ +diff -urN linux-2.6.19.2.old/arch/cris/kernel/profile.c linux-2.6.19.2.dev/arch/cris/kernel/profile.c +--- linux-2.6.19.2.old/arch/cris/kernel/profile.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/profile.c 2004-10-05 08:22:44.000000000 +0200 +@@ -42,7 +42,7 @@ + return count; + } + +-static ssize_t ++static ssize_t + write_cris_profile(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) + { +diff -urN linux-2.6.19.2.old/arch/cris/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/kernel/ptrace.c +--- linux-2.6.19.2.old/arch/cris/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/ptrace.c 2006-03-23 15:54:02.000000000 +0100 +@@ -8,6 +8,9 @@ + * Authors: Bjorn Wesen + * + * $Log: ptrace.c,v $ ++ * Revision 1.11 2006/03/23 14:54:02 starvik ++ * Corrected signal handling. ++ * + * Revision 1.10 2004/09/22 11:50:01 orjanf + * * Moved get_reg/put_reg to arch-specific files. + * * Added functions to access debug registers (CRISv32). +@@ -82,13 +85,13 @@ + /* notification of userspace execution resumption + * - triggered by current->work.notify_resume + */ +-extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs); ++extern int do_signal(int canrestart, struct pt_regs *regs); + + +-void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs, ++void do_notify_resume(int canrestart, struct pt_regs *regs, + __u32 thread_info_flags ) + { + /* deal with pending signal delivery */ + if (thread_info_flags & _TIF_SIGPENDING) +- do_signal(canrestart,oldset,regs); ++ do_signal(canrestart,regs); + } +diff -urN linux-2.6.19.2.old/arch/cris/kernel/semaphore.c linux-2.6.19.2.dev/arch/cris/kernel/semaphore.c +--- linux-2.6.19.2.old/arch/cris/kernel/semaphore.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/semaphore.c 2005-10-31 09:48:05.000000000 +0100 +@@ -4,7 +4,7 @@ + */ + + #include <linux/sched.h> +-#include <linux/init.h> ++#include <asm/semaphore.h> + #include <asm/semaphore-helper.h> + + /* +@@ -95,6 +95,7 @@ + tsk->state = TASK_RUNNING; \ + remove_wait_queue(&sem->wait, &wait); + ++ + void __sched __down(struct semaphore * sem) + { + DOWN_VAR +diff -urN linux-2.6.19.2.old/arch/cris/kernel/setup.c linux-2.6.19.2.dev/arch/cris/kernel/setup.c +--- linux-2.6.19.2.old/arch/cris/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/setup.c 2007-01-09 10:29:20.000000000 +0100 +@@ -18,7 +18,7 @@ + #include <linux/screen_info.h> + #include <linux/utsname.h> + #include <linux/pfn.h> +- ++#include <linux/cpu.h> + #include <asm/setup.h> + + /* +@@ -36,6 +36,8 @@ + + extern unsigned long romfs_start, romfs_length, romfs_in_flash; /* from head.S */ + ++static struct cpu cpu_devices[NR_CPUS]; ++ + extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */ + + /* This mainly sets up the memory area, and can be really confusing. +@@ -187,4 +189,14 @@ + .show = show_cpuinfo, + }; + ++static int __init topology_init(void) ++{ ++ int i; ++ ++ for_each_possible_cpu(i) { ++ return register_cpu(&cpu_devices[i], i); ++ } ++} ++ ++subsys_initcall(topology_init); + +diff -urN linux-2.6.19.2.old/arch/cris/kernel/sys_cris.c linux-2.6.19.2.dev/arch/cris/kernel/sys_cris.c +--- linux-2.6.19.2.old/arch/cris/kernel/sys_cris.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/sys_cris.c 2007-01-09 10:29:20.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: sys_cris.c,v 1.6 2004/03/11 11:38:40 starvik Exp $ ++/* $Id: sys_cris.c,v 1.7 2007/01/09 09:29:20 starvik Exp $ + * + * linux/arch/cris/kernel/sys_cris.c + * +@@ -172,3 +172,4 @@ + return -ENOSYS; + } + } ++ +diff -urN linux-2.6.19.2.old/arch/cris/kernel/time.c linux-2.6.19.2.dev/arch/cris/kernel/time.c +--- linux-2.6.19.2.old/arch/cris/kernel/time.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/time.c 2007-01-09 10:29:20.000000000 +0100 +@@ -1,4 +1,4 @@ +-/* $Id: time.c,v 1.18 2005/03/04 08:16:17 starvik Exp $ ++/* $Id: time.c,v 1.23 2007/01/09 09:29:20 starvik Exp $ + * + * linux/arch/cris/kernel/time.c + * +@@ -172,10 +172,6 @@ + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); + +- printk(KERN_DEBUG +- "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n", +- sec, min, hour, day, mon, year); +- + BCD_TO_BIN(sec); + BCD_TO_BIN(min); + BCD_TO_BIN(hour); +@@ -208,11 +204,11 @@ + cris_do_profile(struct pt_regs* regs) + { + +-#if CONFIG_SYSTEM_PROFILER ++#ifdef CONFIG_SYSTEM_PROFILER + cris_profile_sample(regs); + #endif + +-#if CONFIG_PROFILING ++#ifdef CONFIG_PROFILING + profile_tick(CPU_PROFILING, regs); + #endif + } +@@ -222,10 +218,15 @@ + */ + unsigned long long sched_clock(void) + { +- return (unsigned long long)jiffies * (1000000000 / HZ); ++ unsigned long long ns; ++ ++ ns = jiffies; ++ ns *= 1000000000 / HZ; ++ ns += get_ns_in_jiffie(); ++ return ns; + } + +-static int ++static int + __init init_udelay(void) + { + loops_per_usec = (loops_per_jiffy * HZ) / 1000000; +diff -urN linux-2.6.19.2.old/arch/cris/kernel/traps.c linux-2.6.19.2.dev/arch/cris/kernel/traps.c +--- linux-2.6.19.2.old/arch/cris/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/kernel/traps.c 2006-12-11 14:04:23.000000000 +0100 +@@ -1,66 +1,78 @@ +-/* $Id: traps.c,v 1.11 2005/01/24 16:03:19 orjanf Exp $ +- * ++/* + * linux/arch/cris/traps.c + * +- * Here we handle the break vectors not used by the system call +- * mechanism, as well as some general stack/register dumping ++ * Here we handle the break vectors not used by the system call ++ * mechanism, as well as some general stack/register dumping + * things. +- * +- * Copyright (C) 2000-2002 Axis Communications AB ++ * ++ * Copyright (C) 2000-2006 Axis Communications AB + * + * Authors: Bjorn Wesen +- * Hans-Peter Nilsson ++ * Hans-Peter Nilsson + * + */ + + #include <linux/init.h> + #include <linux/module.h> ++ + #include <asm/pgtable.h> + #include <asm/uaccess.h> + ++extern void arch_enable_nmi(void); ++extern void stop_watchdog(void); ++extern void reset_watchdog(void); ++extern void show_registers(struct pt_regs *regs); ++ ++#ifdef CONFIG_DEBUG_BUGVERBOSE ++extern void handle_BUG(struct pt_regs *regs); ++#else ++#define handle_BUG(regs) ++#endif ++ + static int kstack_depth_to_print = 24; + +-extern int raw_printk(const char *fmt, ...); ++void (*nmi_handler)(struct pt_regs*); + +-void show_trace(unsigned long * stack) ++void ++show_trace(unsigned long *stack) + { + unsigned long addr, module_start, module_end; + extern char _stext, _etext; + int i; + +- raw_printk("\nCall Trace: "); ++ printk("\nCall Trace: "); + +- i = 1; +- module_start = VMALLOC_START; +- module_end = VMALLOC_END; ++ i = 1; ++ module_start = VMALLOC_START; ++ module_end = VMALLOC_END; + +- while (((long) stack & (THREAD_SIZE-1)) != 0) { +- if (__get_user (addr, stack)) { ++ while (((long)stack & (THREAD_SIZE-1)) != 0) { ++ if (__get_user(addr, stack)) { + /* This message matches "failing address" marked + s390 in ksymoops, so lines containing it will + not be filtered out by ksymoops. */ +- raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); ++ printk("Failing address 0x%lx\n", (unsigned long)stack); + break; + } + stack++; + +- /* +- * If the address is either in the text segment of the +- * kernel, or in the region which contains vmalloc'ed +- * memory, it *may* be the address of a calling +- * routine; if so, print it so that someone tracing +- * down the cause of the crash will be able to figure +- * out the call path that was taken. +- */ +- if (((addr >= (unsigned long) &_stext) && +- (addr <= (unsigned long) &_etext)) || +- ((addr >= module_start) && (addr <= module_end))) { +- if (i && ((i % 8) == 0)) +- raw_printk("\n "); +- raw_printk("[<%08lx>] ", addr); +- i++; +- } +- } ++ /* ++ * If the address is either in the text segment of the ++ * kernel, or in the region which contains vmalloc'ed ++ * memory, it *may* be the address of a calling ++ * routine; if so, print it so that someone tracing ++ * down the cause of the crash will be able to figure ++ * out the call path that was taken. ++ */ ++ if (((addr >= (unsigned long)&_stext) && ++ (addr <= (unsigned long)&_etext)) || ++ ((addr >= module_start) && (addr <= module_end))) { ++ if (i && ((i % 8) == 0)) ++ printk("\n "); ++ printk("[<%08lx>] ", addr); ++ i++; ++ } ++ } + } + + /* +@@ -78,109 +90,150 @@ + * with the ksymoops maintainer. + */ + +-void ++void + show_stack(struct task_struct *task, unsigned long *sp) + { +- unsigned long *stack, addr; +- int i; ++ unsigned long *stack, addr; ++ int i; + + /* + * debugging aid: "show_stack(NULL);" prints a + * back trace. + */ + +- if(sp == NULL) { ++ if (sp == NULL) { + if (task) + sp = (unsigned long*)task->thread.ksp; + else + sp = (unsigned long*)rdsp(); + } + +- stack = sp; ++ stack = sp; + +- raw_printk("\nStack from %08lx:\n ", (unsigned long)stack); +- for(i = 0; i < kstack_depth_to_print; i++) { +- if (((long) stack & (THREAD_SIZE-1)) == 0) +- break; +- if (i && ((i % 8) == 0)) +- raw_printk("\n "); +- if (__get_user (addr, stack)) { ++ printk("\nStack from %08lx:\n ", (unsigned long)stack); ++ for (i = 0; i < kstack_depth_to_print; i++) { ++ if (((long)stack & (THREAD_SIZE-1)) == 0) ++ break; ++ if (i && ((i % 8) == 0)) ++ printk("\n "); ++ if (__get_user(addr, stack)) { + /* This message matches "failing address" marked + s390 in ksymoops, so lines containing it will + not be filtered out by ksymoops. */ +- raw_printk ("Failing address 0x%lx\n", (unsigned long)stack); ++ printk("Failing address 0x%lx\n", (unsigned long)stack); + break; + } + stack++; +- raw_printk("%08lx ", addr); +- } ++ printk("%08lx ", addr); ++ } + show_trace(sp); + } + +-static void (*nmi_handler)(struct pt_regs*); +-extern void arch_enable_nmi(void); ++#if 0 ++/* displays a short stack trace */ + +-void set_nmi_handler(void (*handler)(struct pt_regs*)) ++int ++show_stack(void) + { +- nmi_handler = handler; +- arch_enable_nmi(); ++ unsigned long *sp = (unsigned long *)rdusp(); ++ int i; ++ ++ printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); ++ for (i = 0; i < 16; i++) ++ printk("sp + %d: 0x%08lx\n", i*4, sp[i]); ++ return 0; + } ++#endif + +-void handle_nmi(struct pt_regs* regs) ++void ++dump_stack(void) + { +- if (nmi_handler) +- nmi_handler(regs); ++ show_stack(NULL, NULL); ++} ++ ++EXPORT_SYMBOL(dump_stack); ++ ++void ++set_nmi_handler(void (*handler)(struct pt_regs*)) ++{ ++ nmi_handler = handler; ++ arch_enable_nmi(); + } + + #ifdef CONFIG_DEBUG_NMI_OOPS +-void oops_nmi_handler(struct pt_regs* regs) ++void ++oops_nmi_handler(struct pt_regs* regs) + { +- stop_watchdog(); +- raw_printk("NMI!\n"); +- show_registers(regs); ++ stop_watchdog(); ++ oops_in_progress = 1; ++ printk("NMI!\n"); ++ show_registers(regs); ++ oops_in_progress = 0; + } + +-static int +-__init oops_nmi_register(void) ++static int __init ++oops_nmi_register(void) + { +- set_nmi_handler(oops_nmi_handler); +- return 0; ++ set_nmi_handler(oops_nmi_handler); ++ return 0; + } + + __initcall(oops_nmi_register); + + #endif + +-#if 0 +-/* displays a short stack trace */ +- +-int +-show_stack() ++/* ++ * This gets called from entry.S when the watchdog has bitten. Show something ++ * similiar to an Oops dump, and if the kernel is configured to be a nice ++ * doggy, then halt instead of reboot. ++ */ ++void ++watchdog_bite_hook(struct pt_regs *regs) + { +- unsigned long *sp = (unsigned long *)rdusp(); +- int i; +- raw_printk("Stack dump [0x%08lx]:\n", (unsigned long)sp); +- for(i = 0; i < 16; i++) +- raw_printk("sp + %d: 0x%08lx\n", i*4, sp[i]); +- return 0; +-} ++#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY ++ local_irq_disable(); ++ stop_watchdog(); ++ show_registers(regs); ++ ++ while (1) ++ ; /* Do nothing. */ ++#else ++ show_registers(regs); + #endif ++} + +-void dump_stack(void) ++/* This is normally the Oops function. */ ++void ++die_if_kernel(const char *str, struct pt_regs *regs, long err) + { +- show_stack(NULL, NULL); +-} ++ if (user_mode(regs)) ++ return; + +-EXPORT_SYMBOL(dump_stack); ++#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY ++ /* ++ * This printout might take too long and could trigger ++ * the watchdog normally. If NICE_DOGGY is set, simply ++ * stop the watchdog during the printout. ++ */ ++ stop_watchdog(); ++#endif + +-void __init +-trap_init(void) +-{ +- /* Nothing needs to be done */ ++ handle_BUG(regs); ++ ++ printk("%s: %04lx\n", str, err & 0xffff); ++ ++ show_registers(regs); ++ ++ oops_in_progress = 0; ++ ++#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY ++ reset_watchdog(); ++#endif ++ do_exit(SIGSEGV); + } + +-void spinning_cpu(void* addr) ++void __init ++trap_init(void) + { +- raw_printk("CPU %d spinning on %X\n", smp_processor_id(), addr); +- dump_stack(); ++ /* Nothing needs to be done */ + } +diff -urN linux-2.6.19.2.old/arch/cris/mm/fault.c linux-2.6.19.2.dev/arch/cris/mm/fault.c +--- linux-2.6.19.2.old/arch/cris/mm/fault.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/mm/fault.c 2006-09-29 13:14:06.000000000 +0200 +@@ -1,11 +1,27 @@ + /* + * linux/arch/cris/mm/fault.c + * +- * Copyright (C) 2000, 2001 Axis Communications AB ++ * Copyright (C) 2000-2006 Axis Communications AB ++ * ++ * Authors: Bjorn Wesen + * +- * Authors: Bjorn Wesen +- * + * $Log: fault.c,v $ ++ * Revision 1.25 2006/09/29 11:14:06 orjanf ++ * * Use arch-independent macro to get irp/erp for v10/v32. ++ * ++ * Revision 1.24 2006/09/29 10:58:09 orjanf ++ * * Added user mode SIGSEGV printk. ++ * ++ * Revision 1.23 2006/06/20 07:42:56 pkj ++ * Removed an unnecessary reference to raw_printk(). ++ * ++ * Revision 1.22 2005/08/29 07:32:20 starvik ++ * Merge of 2.6.13 ++ * ++ * Revision 1.21 2005/07/02 12:29:37 starvik ++ * Use the generic oops_in_progress instead of the raw_printk hack. ++ * Moved some functions to achr-independent code. ++ * + * Revision 1.20 2005/03/04 08:16:18 starvik + * Merge of Linux 2.6.11. + * +@@ -135,7 +151,6 @@ + + extern int find_fixup_code(struct pt_regs *); + extern void die_if_kernel(const char *, struct pt_regs *, long); +-extern int raw_printk(const char *fmt, ...); + + /* debug of low-level TLB reload */ + #undef DEBUG +@@ -164,8 +179,8 @@ + * address. + * + * error_code: +- * bit 0 == 0 means no page found, 1 means protection fault +- * bit 1 == 0 means read, 1 means write ++ * bit 0 == 0 means no page found, 1 means protection fault ++ * bit 1 == 0 means read, 1 means write + * + * If this routine detects a bad access, it returns 1, otherwise it + * returns 0. +@@ -180,9 +195,9 @@ + struct vm_area_struct * vma; + siginfo_t info; + +- D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", +- address, smp_processor_id(), instruction_pointer(regs), +- protection, writeaccess)); ++ D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n", ++ address, smp_processor_id(), instruction_pointer(regs), ++ protection, writeaccess)); + + tsk = current; + +@@ -318,6 +333,8 @@ + /* info.si_code has been set above */ + info.si_addr = (void *)address; + force_sig_info(SIGSEGV, &info, tsk); ++ printk(KERN_NOTICE "%s (pid %d) segfaults for page address %08lx at pc %08lx\n", ++ tsk->comm, tsk->pid, address, instruction_pointer(regs)); + return; + } + +@@ -325,7 +342,7 @@ + + /* Are we prepared to handle this kernel fault? + * +- * (The kernel has valid exception-points in the source ++ * (The kernel has valid exception-points in the source + * when it acesses user-memory. When it fails in one + * of those points, we find it in a table and do a jump + * to some fixup code that loads an appropriate error +@@ -340,13 +357,17 @@ + * terminate things with extreme prejudice. + */ + +- if ((unsigned long) (address) < PAGE_SIZE) +- raw_printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); +- else +- raw_printk(KERN_ALERT "Unable to handle kernel access"); +- raw_printk(" at virtual address %08lx\n",address); ++ if (!oops_in_progress) { ++ oops_in_progress = 1; ++ if ((unsigned long) (address) < PAGE_SIZE) ++ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); ++ else ++ printk(KERN_ALERT "Unable to handle kernel access"); ++ printk(" at virtual address %08lx\n",address); + +- die_if_kernel("Oops", regs, (writeaccess << 1) | protection); ++ die_if_kernel("Oops", regs, (writeaccess << 1) | protection); ++ oops_in_progress = 0; ++ } + + do_exit(SIGKILL); + +@@ -405,8 +426,8 @@ + /* Since we're two-level, we don't need to do both + * set_pgd and set_pmd (they do the same thing). If + * we go three-level at some point, do the right thing +- * with pgd_present and set_pgd here. +- * ++ * with pgd_present and set_pgd here. ++ * + * Also, since the vmalloc area is global, we don't + * need to copy individual PTE's, it is enough to + * copy the pgd pointer into the pte page of the +diff -urN linux-2.6.19.2.old/arch/cris/mm/init.c linux-2.6.19.2.dev/arch/cris/mm/init.c +--- linux-2.6.19.2.old/arch/cris/mm/init.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/arch/cris/mm/init.c 2006-06-25 17:00:10.000000000 +0200 +@@ -7,6 +7,15 @@ + * Authors: Bjorn Wesen (bjornw@axis.com) + * + * $Log: init.c,v $ ++ * Revision 1.14 2006/06/25 15:00:10 starvik ++ * Merge of Linux 2.6.17 ++ * ++ * Revision 1.13 2005/06/20 05:30:00 starvik ++ * Remove unnecessary diff to kernel.org tree ++ * ++ * Revision 1.12 2004/08/16 12:37:24 starvik ++ * Merge of Linux 2.6.8 ++ * + * Revision 1.11 2004/05/28 09:28:56 starvik + * Calculation of loops_per_usec moved because initalization order has changed + * in Linux 2.6. diff --git a/target/linux/etrax/patches/cris/003-drivers-cris.patch b/target/linux/etrax/patches/cris/003-drivers-cris.patch new file mode 100644 index 0000000000..1f42fc86e6 --- /dev/null +++ b/target/linux/etrax/patches/cris/003-drivers-cris.patch @@ -0,0 +1,22601 @@ +diff -urN linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c +--- linux-2.6.19.2.orig/drivers/ide/cris/ide-cris.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/ide/cris/ide-cris.c 2006-12-06 14:17:02.000000000 +0100 +@@ -1,8 +1,8 @@ +-/* $Id: cris-ide-driver.patch,v 1.1 2005/06/29 21:39:07 akpm Exp $ ++/* $Id: ide-cris.c,v 1.10 2006/12/06 13:17:02 starvik Exp $ + * + * Etrax specific IDE functions, like init and PIO-mode setting etc. + * Almost the entire ide.c is used for the rest of the Etrax ATA driver. +- * Copyright (c) 2000-2005 Axis Communications AB ++ * Copyright (c) 2000-2006 Axis Communications AB + * + * Authors: Bjorn Wesen (initial version) + * Mikael Starvik (crisv32 port) +@@ -43,8 +43,8 @@ + + #define IDE_REGISTER_TIMEOUT 300 + +-#define LOWDB(x) +-#define D(x) ++#define LOWDB(x) ++#define D(x) + + enum /* Transfer types */ + { +@@ -88,12 +88,50 @@ + #define ATA_PIO0_STROBE 39 + #define ATA_PIO0_HOLD 9 + +-int ++/* ++ * On ETRAX FS, an interrupt remains latched and active until ack:ed. ++ * Further, ATA acks are without effect as long as INTRQ is asserted, as the ++ * corresponding ATA interrupt is continuously set to active. There will be a ++ * clearing ack at the usual cris_ide_ack_intr call, but that serves just to ++ * gracefully handle an actual spurious interrupt or similar situation (which ++ * will cause an early return without further actions, see the ide_intr ++ * function). ++ * ++ * However, the normal case at time of this writing is that nothing has ++ * changed from when INTRQ was asserted until the cris_ide_ack_intr call; no ++ * ATA registers written and no status register read, so INTRQ will *remain* ++ * asserted, thus *another* interrupt will be latched, and will be seen as a ++ * spurious interrupt after the "real" interrupt is serviced. With lots of ++ * ATA traffic (as in a trivial file-copy between two drives), this will trig ++ * the condition desc->irqs_unhandled > 99900 in ++ * kernel/irq/spurious.c:note_interrupt and the system will halt. ++ * ++ * To actually get rid of the interrupt corresponding to the current INTRQ ++ * assertion, we make a second ack after the next ATA register read or write; ++ * i.e. when INTRQ must be deasserted. At that time, we don't have the hwif ++ * pointer available, so we need to stash a local copy (safe, because it'll be ++ * set and cleared within the same spin_lock_irqsave region). The pointer ++ * serves doubly as a boolean flag that an ack is needed. The caller must ++ * NULL the pointer after the "second ack". ++ */ ++ ++static ide_hwif_t *hwif_to_ack; ++ ++static int + cris_ide_ack_intr(ide_hwif_t* hwif) + { +- reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, ++ /* ++ * The interrupt is shared so we need to find the interface bit number ++ * to ack. We define the ATA I/O register addresses to have the ++ * format of ata rw_ctrl2 register contents, conveniently holding this ++ * number. ++ */ ++ reg_ata_rw_ctrl2 ctrl2 = REG_TYPE_CONV(reg_ata_rw_ctrl2, + int, hwif->io_ports[0]); + REG_WR_INT(ata, regi_ata, rw_ack_intr, 1 << ctrl2.sel); ++ ++ /* Prepare to ack again, see above. */ ++ hwif_to_ack = hwif; + return 1; + } + +@@ -122,8 +160,24 @@ + + static void + cris_ide_write_command(unsigned long command) +-{ ++{ + REG_WR_INT(ata, regi_ata, rw_ctrl2, command); /* write data to the drive's register */ ++ ++ /* ++ * Perform a pending ack if needed; see hwif_ack definition. Perhaps ++ * we should check closer that this call is really a part of the ++ * preparation to read the ATA status register or write to the ATA ++ * command register (causing deassert of INTRQ; see the ATA standard), ++ * but at time of this writing (and expected to sanely remain so), the ++ * first ATA register activity after an cris_ide_ack_intr call is ++ * certain to do exactly that. ++ */ ++ if (hwif_to_ack) { ++ /* The drive may take this long to deassert INTRQ. */ ++ ndelay(400); ++ cris_ide_ack_intr(hwif_to_ack); ++ hwif_to_ack = NULL; ++ } + } + + static void +@@ -160,8 +214,8 @@ + { + reg_ata_rw_ctrl2 ctrl2 = {0}; + ctrl2.addr = addr; +- ctrl2.cs1 = cs1; +- ctrl2.cs0 = cs0; ++ ctrl2.cs1 = !cs1; ++ ctrl2.cs0 = !cs0; + return REG_TYPE_CONV(int, reg_ata_rw_ctrl2, ctrl2); + } + +@@ -184,14 +238,14 @@ + + intr_mask.bus0 = regk_ata_yes; + intr_mask.bus1 = regk_ata_yes; +- intr_mask.bus2 = regk_ata_yes; ++ intr_mask.bus2 = regk_ata_yes; + intr_mask.bus3 = regk_ata_yes; + + REG_WR(ata, regi_ata, rw_intr_mask, intr_mask); + + crisv32_request_dma(2, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata); + crisv32_request_dma(3, "ETRAX FS built-in ATA", DMA_VERBOSE_ON_ERROR, 0, dma_ata); +- ++ + crisv32_pinmux_alloc_fixed(pinmux_ata); + crisv32_pinmux_alloc_fixed(pinmux_ata0); + crisv32_pinmux_alloc_fixed(pinmux_ata1); +@@ -204,14 +258,15 @@ + DMA_ENABLE(regi_dma3); + + DMA_WR_CMD (regi_dma2, regk_dma_set_w_size2); +- DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2); ++ DMA_WR_CMD (regi_dma3, regk_dma_set_w_size2); + } + + static dma_descr_context mycontext __attribute__ ((__aligned__(32))); + + #define cris_dma_descr_type dma_descr_data +-#define cris_pio_read regk_ata_rd +-#define cris_ultra_mask 0x7 ++#define cris_pio_read (regk_ata_rd << 24) ++#define cris_ultra_mask 0x0 /* 0x7 for UDMA */ ++#define IRQ ATA_INTR_VECT + #define MAX_DESCR_SIZE 0xffffffffUL + + static unsigned long +@@ -226,6 +281,8 @@ + d->buf = (char*)virt_to_phys(buf); + d->after = d->buf + len; + d->eol = last; ++ /* assume descriptors are consecutively placed in memory */ ++ d->next = last ? 0 : (cris_dma_descr_type*)virt_to_phys(d+1); + } + + static void +@@ -237,8 +294,10 @@ + mycontext.saved_data = (dma_descr_data*)virt_to_phys(d); + mycontext.saved_data_buf = d->buf; + /* start the dma channel */ ++ if (dir) ++ flush_dma_context(&mycontext); // Cache bug workaround + DMA_START_CONTEXT(dir ? regi_dma3 : regi_dma2, virt_to_phys(&mycontext)); +- ++ + /* initiate a multi word dma read using PIO handshaking */ + trf_cnt.cnt = len >> 1; + /* Due to a "feature" the transfer count has to be one extra word for UDMA. */ +@@ -248,7 +307,7 @@ + + ctrl2.rw = dir ? regk_ata_rd : regk_ata_wr; + ctrl2.trf_mode = regk_ata_dma; +- ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio : ++ ctrl2.hsh = type == TYPE_PIO ? regk_ata_pio : + type == TYPE_DMA ? regk_ata_dma : regk_ata_udma; + ctrl2.multi = regk_ata_yes; + ctrl2.dma_size = regk_ata_word; +@@ -339,7 +398,7 @@ + #define ATA_PIO0_STROBE 19 + #define ATA_PIO0_HOLD 4 + +-int ++int + cris_ide_ack_intr(ide_hwif_t* hwif) + { + return 1; +@@ -348,13 +407,13 @@ + static inline int + cris_ide_busy(void) + { +- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ; ++ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, busy) ; + } + + static inline int + cris_ide_ready(void) + { +- return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ; ++ return *R_ATA_STATUS_DATA & IO_MASK(R_ATA_STATUS_DATA, tr_rdy) ; + } + + static inline int +@@ -364,12 +423,12 @@ + *data = (unsigned short)status; + return status & IO_MASK(R_ATA_STATUS_DATA, dav); + } +- ++ + static void + cris_ide_write_command(unsigned long command) + { +- *R_ATA_CTRL_DATA = command; +-} ++ *R_ATA_CTRL_DATA = command; ++} + + static void + cris_ide_set_speed(int type, int setup, int strobe, int hold) +@@ -406,8 +465,8 @@ + cris_ide_reg_addr(unsigned long addr, int cs0, int cs1) + { + return IO_FIELD(R_ATA_CTRL_DATA, addr, addr) | +- IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0) | +- IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1); ++ IO_FIELD(R_ATA_CTRL_DATA, cs0, cs0 ? 0 : 1) | ++ IO_FIELD(R_ATA_CTRL_DATA, cs1, cs1 ? 0 : 1); + } + + static __init void +@@ -484,6 +543,7 @@ + #define cris_dma_descr_type etrax_dma_descr + #define cris_pio_read IO_STATE(R_ATA_CTRL_DATA, rw, read) + #define cris_ultra_mask 0x0 ++#define IRQ 4 + #define MAX_DESCR_SIZE 0x10000UL + + static unsigned long +@@ -497,8 +557,8 @@ + { + d->buf = virt_to_phys(buf); + d->sw_len = len == MAX_DESCR_SIZE ? 0 : len; +- if (last) +- d->ctrl |= d_eol; ++ d->ctrl = last ? d_eol : 0; ++ d->next = last ? 0 : virt_to_phys(d+1); /* assumes descr's in array */ + } + + static void cris_ide_start_dma(ide_drive_t *drive, cris_dma_descr_type *d, int dir, int type, int len) +@@ -521,14 +581,14 @@ + *R_DMA_CH2_FIRST = virt_to_phys(d); + *R_DMA_CH2_CMD = IO_STATE(R_DMA_CH2_CMD, cmd, start); + } +- ++ + /* initiate a multi word dma read using DMA handshaking */ + + *R_ATA_TRANSFER_CNT = + IO_FIELD(R_ATA_TRANSFER_CNT, count, len >> 1); + + cmd = dir ? IO_STATE(R_ATA_CTRL_DATA, rw, read) : IO_STATE(R_ATA_CTRL_DATA, rw, write); +- cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) : ++ cmd |= type == TYPE_PIO ? IO_STATE(R_ATA_CTRL_DATA, handsh, pio) : + IO_STATE(R_ATA_CTRL_DATA, handsh, dma); + *R_ATA_CTRL_DATA = + cmd | +@@ -570,7 +630,7 @@ + } + + #endif +- ++ + void + cris_ide_outw(unsigned short data, unsigned long reg) { + int timeleft; +@@ -597,7 +657,7 @@ + if(!timeleft) + printk("ATA timeout reg 0x%lx := 0x%x\n", reg, data); + +- cris_ide_write_command(reg|data); /* write data to the drive's register */ ++ cris_ide_write_command(reg|data); /* write data to the drive's register */ + + timeleft = IDE_REGISTER_TIMEOUT; + /* wait for transmitter ready */ +@@ -684,13 +744,15 @@ + static void cris_atapi_output_bytes(ide_drive_t *drive, void *, unsigned int); + static int cris_dma_off (ide_drive_t *drive); + static int cris_dma_on (ide_drive_t *drive); ++static int cris_dma_host_off (ide_drive_t *drive); ++static int cris_dma_host_on (ide_drive_t *drive); + + static void tune_cris_ide(ide_drive_t *drive, u8 pio) + { + int setup, strobe, hold; + + switch(pio) +- { ++ { + case 0: + setup = ATA_PIO0_SETUP; + strobe = ATA_PIO0_STROBE; +@@ -715,7 +777,7 @@ + setup = ATA_PIO4_SETUP; + strobe = ATA_PIO4_STROBE; + hold = ATA_PIO4_HOLD; +- break; ++ break; + default: + return; + } +@@ -733,7 +795,7 @@ + } + + switch(speed) +- { ++ { + case XFER_UDMA_0: + cyc = ATA_UDMA0_CYC; + dvs = ATA_UDMA0_DVS; +@@ -765,7 +827,7 @@ + if (speed >= XFER_UDMA_0) + cris_ide_set_speed(TYPE_UDMA, cyc, dvs, 0); + else +- cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); ++ cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); + + return 0; + } +@@ -790,11 +852,13 @@ + + for(h = 0; h < MAX_HWIFS; h++) { + ide_hwif_t *hwif = &ide_hwifs[h]; +- ide_setup_ports(&hw, cris_ide_base_address(h), ++ memset(&hw, 0, sizeof(hw)); ++ ide_setup_ports(&hw, cris_ide_base_address(h), + ide_offsets, + 0, 0, cris_ide_ack_intr, +- ide_default_irq(0)); ++ IRQ); + ide_register_hw(&hw, &hwif); ++ hwif->irq = IRQ; + hwif->mmio = 2; + hwif->chipset = ide_etrax100; + hwif->tuneproc = &tune_cris_ide; +@@ -814,13 +878,15 @@ + hwif->OUTBSYNC = &cris_ide_outbsync; + hwif->INB = &cris_ide_inb; + hwif->INW = &cris_ide_inw; +- hwif->ide_dma_host_off = &cris_dma_off; +- hwif->ide_dma_host_on = &cris_dma_on; ++ hwif->ide_dma_host_off = &cris_dma_host_off; ++ hwif->ide_dma_host_on = &cris_dma_host_on; + hwif->ide_dma_off_quietly = &cris_dma_off; ++ hwif->ide_dma_on = &cris_dma_on; + hwif->udma_four = 0; + hwif->ultra_mask = cris_ultra_mask; + hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */ + hwif->swdma_mask = 0x07; /* Singleword DMA 0-2 */ ++ hwif->rqsize = 256; + } + + /* Reset pulse */ +@@ -835,13 +901,25 @@ + cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0); + } + ++static int cris_dma_host_off (ide_drive_t *drive) ++{ ++ return 0; ++} ++ ++static int cris_dma_host_on (ide_drive_t *drive) ++{ ++ return 0; ++} ++ + static int cris_dma_off (ide_drive_t *drive) + { ++ drive->using_dma = 0; + return 0; + } + + static int cris_dma_on (ide_drive_t *drive) + { ++ drive->using_dma = 1; + return 0; + } + +@@ -958,30 +1036,28 @@ + size += sg_dma_len(sg); + } + +- /* did we run out of descriptors? */ +- +- if(count >= MAX_DMA_DESCRS) { +- printk("%s: too few DMA descriptors\n", drive->name); +- return 1; +- } +- +- /* however, this case is more difficult - rw_trf_cnt cannot be more +- than 65536 words per transfer, so in that case we need to either ++ /* rw_trf_cnt cannot be more than 131072 words per transfer, ++ (- 1 word for UDMA CRC) so in that case we need to either: + 1) use a DMA interrupt to re-trigger rw_trf_cnt and continue with + the descriptors, or + 2) simply do the request here, and get dma_intr to only ide_end_request on + those blocks that were actually set-up for transfer. ++ (The ide framework will issue a new request for the remainder) + */ + +- if(ata_tot_size + size > 131072) { ++ if(ata_tot_size + size > 262140) { + printk("too large total ATA DMA request, %d + %d!\n", ata_tot_size, (int)size); + return 1; + } + +- /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. Since we +- don't handle size > 131072 only one split is necessary */ ++ /* If size > MAX_DESCR_SIZE it has to be splitted into new descriptors. */ + +- if(size > MAX_DESCR_SIZE) { ++ while (size > MAX_DESCR_SIZE) { ++ /* did we run out of descriptors? */ ++ if(count >= MAX_DMA_DESCRS) { ++ printk("%s: too few DMA descriptors\n", drive->name); ++ return 1; ++ } + cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, MAX_DESCR_SIZE, 0); + count++; + ata_tot_size += MAX_DESCR_SIZE; +@@ -989,6 +1065,11 @@ + addr += MAX_DESCR_SIZE; + } + ++ /* did we run out of descriptors? */ ++ if(count >= MAX_DMA_DESCRS) { ++ printk("%s: too few DMA descriptors\n", drive->name); ++ return 1; ++ } + cris_ide_fill_descriptor(&ata_descrs[count], (void*)addr, size,i ? 0 : 1); + count++; + ata_tot_size += size; +@@ -1050,8 +1131,12 @@ + + if (id && (id->capability & 1)) { + if (ide_use_dma(drive)) { +- if (cris_config_drive_for_dma(drive)) +- return hwif->ide_dma_on(drive); ++ if (cris_config_drive_for_dma(drive)) { ++ if (hwif->ide_dma_on) ++ return hwif->ide_dma_on(drive); ++ else ++ return 1; ++ } + } + } + +--- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/serial/crisv10.c 2007-01-09 10:30:54.000000000 +0100 +@@ -2,7 +2,7 @@ + * + * Serial port driver for the ETRAX 100LX chip + * +- * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Axis Communications AB ++ * Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB + * + * Many, many authors. Based once upon a time on serial.c for 16x50. + * +@@ -445,6 +445,7 @@ + + #include <asm/io.h> + #include <asm/irq.h> ++#include <asm/dma.h> + #include <asm/system.h> + #include <asm/bitops.h> + #include <linux/delay.h> +@@ -454,8 +455,9 @@ + /* non-arch dependent serial structures are in linux/serial.h */ + #include <linux/serial.h> + /* while we keep our own stuff (struct e100_serial) in a local .h file */ +-#include "serial.h" ++#include "crisv10.h" + #include <asm/fasttimer.h> ++#include <asm/arch/io_interface_mux.h> + + #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER + #ifndef CONFIG_ETRAX_FAST_TIMER +@@ -586,11 +588,10 @@ + static void change_speed(struct e100_serial *info); + static void rs_throttle(struct tty_struct * tty); + static void rs_wait_until_sent(struct tty_struct *tty, int timeout); +-static int rs_write(struct tty_struct * tty, int from_user, ++static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count); + #ifdef CONFIG_ETRAX_RS485 +-static int e100_write_rs485(struct tty_struct * tty, int from_user, +- const unsigned char *buf, int count); ++static int e100_write_rs485(struct tty_struct * tty, const unsigned char *buf, int count); + #endif + static int get_lsr_info(struct e100_serial * info, unsigned int *value); + +@@ -677,20 +678,39 @@ + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 2, ++ .dma_owner = dma_ser0, ++ .io_if = if_serial_0, + #ifdef CONFIG_ETRAX_SERIAL_PORT0 + .enabled = 1, + #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT + .dma_out_enabled = 1, ++ .dma_out_nbr = SER0_TX_DMA_NBR, ++ .dma_out_irq_nbr = SER0_DMA_TX_IRQ_NBR, ++ .dma_out_irq_flags = IRQF_DISABLED, ++ .dma_out_irq_description = "serial 0 dma tr", + #else + .dma_out_enabled = 0, ++ .dma_out_nbr = UINT_MAX, ++ .dma_out_irq_nbr = 0, ++ .dma_out_irq_flags = 0, ++ .dma_out_irq_description = NULL, + #endif + #ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN + .dma_in_enabled = 1, ++ .dma_in_nbr = SER0_RX_DMA_NBR, ++ .dma_in_irq_nbr = SER0_DMA_RX_IRQ_NBR, ++ .dma_in_irq_flags = IRQF_DISABLED, ++ .dma_in_irq_description = "serial 0 dma rec", + #else +- .dma_in_enabled = 0 ++ .dma_in_enabled = 0, ++ .dma_in_nbr = UINT_MAX, ++ .dma_in_irq_nbr = 0, ++ .dma_in_irq_flags = 0, ++ .dma_in_irq_description = NULL, + #endif + #else + .enabled = 0, ++ .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 + #endif +@@ -712,20 +732,42 @@ + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 3, ++ .dma_owner = dma_ser1, ++ .io_if = if_serial_1, + #ifdef CONFIG_ETRAX_SERIAL_PORT1 + .enabled = 1, ++ .io_if_description = "ser1", + #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT + .dma_out_enabled = 1, ++ .dma_out_nbr = SER1_TX_DMA_NBR, ++ .dma_out_irq_nbr = SER1_DMA_TX_IRQ_NBR, ++ .dma_out_irq_flags = IRQF_DISABLED, ++ .dma_out_irq_description = "serial 1 dma tr", + #else + .dma_out_enabled = 0, ++ .dma_out_nbr = UINT_MAX, ++ .dma_out_irq_nbr = 0, ++ .dma_out_irq_flags = 0, ++ .dma_out_irq_description = NULL, + #endif + #ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN + .dma_in_enabled = 1, ++ .dma_in_nbr = SER1_RX_DMA_NBR, ++ .dma_in_irq_nbr = SER1_DMA_RX_IRQ_NBR, ++ .dma_in_irq_flags = IRQF_DISABLED, ++ .dma_in_irq_description = "serial 1 dma rec", + #else +- .dma_in_enabled = 0 ++ .dma_in_enabled = 0, ++ .dma_in_enabled = 0, ++ .dma_in_nbr = UINT_MAX, ++ .dma_in_irq_nbr = 0, ++ .dma_in_irq_flags = 0, ++ .dma_in_irq_description = NULL, + #endif + #else + .enabled = 0, ++ .io_if_description = NULL, ++ .dma_in_irq_nbr = 0, + .dma_out_enabled = 0, + .dma_in_enabled = 0 + #endif +@@ -746,20 +788,40 @@ + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 0, ++ .dma_owner = dma_ser2, ++ .io_if = if_serial_2, + #ifdef CONFIG_ETRAX_SERIAL_PORT2 + .enabled = 1, ++ .io_if_description = "ser2", + #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT + .dma_out_enabled = 1, ++ .dma_out_nbr = SER2_TX_DMA_NBR, ++ .dma_out_irq_nbr = SER2_DMA_TX_IRQ_NBR, ++ .dma_out_irq_flags = IRQF_DISABLED, ++ .dma_out_irq_description = "serial 2 dma tr", + #else + .dma_out_enabled = 0, ++ .dma_in_nbr = UINT_MAX, ++ .dma_in_irq_nbr = 0, ++ .dma_in_irq_flags = 0, ++ .dma_in_irq_description = NULL, + #endif + #ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN + .dma_in_enabled = 1, ++ .dma_in_nbr = SER2_RX_DMA_NBR, ++ .dma_in_irq_nbr = SER2_DMA_RX_IRQ_NBR, ++ .dma_in_irq_flags = IRQF_DISABLED, ++ .dma_in_irq_description = "serial 2 dma rec", + #else +- .dma_in_enabled = 0 ++ .dma_in_enabled = 0, ++ .dma_in_nbr = UINT_MAX, ++ .dma_in_irq_nbr = 0, ++ .dma_in_irq_flags = 0, ++ .dma_in_irq_description = NULL, + #endif + #else + .enabled = 0, ++ .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 + #endif +@@ -780,20 +842,40 @@ + .rx_ctrl = DEF_RX, + .tx_ctrl = DEF_TX, + .iseteop = 1, ++ .dma_owner = dma_ser3, ++ .io_if = if_serial_3, + #ifdef CONFIG_ETRAX_SERIAL_PORT3 + .enabled = 1, ++ .io_if_description = "ser3", + #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT + .dma_out_enabled = 1, ++ .dma_out_nbr = SER3_TX_DMA_NBR, ++ .dma_out_irq_nbr = SER3_DMA_TX_IRQ_NBR, ++ .dma_out_irq_flags = IRQF_DISABLED, ++ .dma_out_irq_description = "serial 3 dma tr", + #else + .dma_out_enabled = 0, ++ .dma_out_nbr = UINT_MAX, ++ .dma_out_irq_nbr = 0, ++ .dma_out_irq_flags = 0, ++ .dma_out_irq_description = NULL, + #endif + #ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN + .dma_in_enabled = 1, ++ .dma_in_nbr = SER3_RX_DMA_NBR, ++ .dma_in_irq_nbr = SER3_DMA_RX_IRQ_NBR, ++ .dma_in_irq_flags = IRQF_DISABLED, ++ .dma_in_irq_description = "serial 3 dma rec", + #else +- .dma_in_enabled = 0 ++ .dma_in_enabled = 0, ++ .dma_in_nbr = UINT_MAX, ++ .dma_in_irq_nbr = 0, ++ .dma_in_irq_flags = 0, ++ .dma_in_irq_description = NULL + #endif + #else + .enabled = 0, ++ .io_if_description = NULL, + .dma_out_enabled = 0, + .dma_in_enabled = 0 + #endif +@@ -1414,12 +1496,11 @@ + { + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + *e100_modem_pins[info->line].dtr_shadow &= ~mask; + *e100_modem_pins[info->line].dtr_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].dtr_port = *e100_modem_pins[info->line].dtr_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + + #ifdef SERIAL_DEBUG_IO +@@ -1438,12 +1519,11 @@ + { + #ifndef CONFIG_SVINTO_SIM + unsigned long flags; +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + info->rx_ctrl &= ~E100_RTS_MASK; + info->rx_ctrl |= (set ? 0 : E100_RTS_MASK); /* RTS is active low */ + info->port[REG_REC_CTRL] = info->rx_ctrl; +- restore_flags(flags); ++ local_irq_restore(flags); + #ifdef SERIAL_DEBUG_IO + printk("ser%i rts %i\n", info->line, set); + #endif +@@ -1461,12 +1541,11 @@ + unsigned char mask = e100_modem_pins[info->line].ri_mask; + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + *e100_modem_pins[info->line].ri_shadow &= ~mask; + *e100_modem_pins[info->line].ri_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].ri_port = *e100_modem_pins[info->line].ri_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + #endif + } +@@ -1479,12 +1558,11 @@ + unsigned char mask = e100_modem_pins[info->line].cd_mask; + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + *e100_modem_pins[info->line].cd_shadow &= ~mask; + *e100_modem_pins[info->line].cd_shadow |= (set ? 0 : mask); + *e100_modem_pins[info->line].cd_port = *e100_modem_pins[info->line].cd_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + #endif + } +@@ -1558,8 +1636,7 @@ + /* Disable output DMA channel for the serial port in question + * ( set to something other then serialX) + */ +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line)); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma6)) == +@@ -1587,7 +1664,7 @@ + } + } + *R_GEN_CONFIG = genconfig_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + + +@@ -1595,8 +1672,7 @@ + { + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "enable_txdma_channel %i\n", info->line)); + /* Enable output DMA channel for the serial port in question */ + if (info->line == 0) { +@@ -1613,7 +1689,7 @@ + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma4, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + + static void e100_disable_rxdma_channel(struct e100_serial *info) +@@ -1623,8 +1699,7 @@ + /* Disable input DMA channel for the serial port in question + * ( set to something other then serialX) + */ +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + if (info->line == 0) { + if ((genconfig_shadow & IO_MASK(R_GEN_CONFIG, dma7)) == + IO_STATE(R_GEN_CONFIG, dma7, serial0)) { +@@ -1651,7 +1726,7 @@ + } + } + *R_GEN_CONFIG = genconfig_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + + +@@ -1659,8 +1734,7 @@ + { + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + /* Enable input DMA channel for the serial port in question */ + if (info->line == 0) { + genconfig_shadow &= ~IO_MASK(R_GEN_CONFIG, dma7); +@@ -1676,7 +1750,7 @@ + genconfig_shadow |= IO_STATE(R_GEN_CONFIG, dma5, serial3); + } + *R_GEN_CONFIG = genconfig_shadow; +- restore_flags(flags); ++ local_irq_restore(flags); + } + + #ifdef SERIAL_HANDLE_EARLY_ERRORS +@@ -1783,7 +1857,7 @@ + } + + static int +-e100_write_rs485(struct tty_struct *tty, int from_user, ++e100_write_rs485(struct tty_struct *tty, + const unsigned char *buf, int count) + { + struct e100_serial * info = (struct e100_serial *)tty->driver_data; +@@ -1796,7 +1870,7 @@ + */ + info->rs485.enabled = 1; + /* rs_write now deals with RS485 if enabled */ +- count = rs_write(tty, from_user, buf, count); ++ count = rs_write(tty, buf, count); + info->rs485.enabled = old_enabled; + return count; + } +@@ -1834,7 +1908,7 @@ + unsigned long flags; + unsigned long xoff; + +- save_flags(flags); cli(); ++ local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_stop xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); +@@ -1846,7 +1920,7 @@ + } + + *((unsigned long *)&info->port[REG_XOFF]) = xoff; +- restore_flags(flags); ++ local_irq_restore(flags); + } + } + +@@ -1858,7 +1932,7 @@ + unsigned long flags; + unsigned long xoff; + +- save_flags(flags); cli(); ++ local_irq_save(flags); + DFLOW(DEBUG_LOG(info->line, "XOFF rs_start xmit %i\n", + CIRC_CNT(info->xmit.head, + info->xmit.tail,SERIAL_XMIT_SIZE))); +@@ -1873,7 +1947,7 @@ + info->xmit.head != info->xmit.tail && info->xmit.buf) + e100_enable_serial_tx_ready_irq(info); + +- restore_flags(flags); ++ local_irq_restore(flags); + } + } + +@@ -2053,8 +2127,7 @@ + static void flush_timeout_function(unsigned long data); + #define START_FLUSH_FAST_TIMER_TIME(info, string, usec) {\ + unsigned long timer_flags; \ +- save_flags(timer_flags); \ +- cli(); \ ++ local_irq_save(timer_flags); \ + if (fast_timers[info->line].function == NULL) { \ + serial_fast_timer_started++; \ + TIMERD(DEBUG_LOG(info->line, "start_timer %i ", info->line)); \ +@@ -2068,7 +2141,7 @@ + else { \ + TIMERD(DEBUG_LOG(info->line, "timer %i already running\n", info->line)); \ + } \ +- restore_flags(timer_flags); \ ++ local_irq_restore(timer_flags); \ + } + #define START_FLUSH_FAST_TIMER(info, string) START_FLUSH_FAST_TIMER_TIME(info, string, info->flush_time_usec) + +@@ -2097,8 +2170,7 @@ + { + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + + if (!info->first_recv_buffer) + info->first_recv_buffer = buffer; +@@ -2111,7 +2183,7 @@ + if (info->recv_cnt > info->max_recv_cnt) + info->max_recv_cnt = info->recv_cnt; + +- restore_flags(flags); ++ local_irq_restore(flags); + } + + static int +@@ -2131,11 +2203,7 @@ + info->icount.rx++; + } else { + struct tty_struct *tty = info->tty; +- *tty->flip.char_buf_ptr = data; +- *tty->flip.flag_buf_ptr = flag; +- tty->flip.flag_buf_ptr++; +- tty->flip.char_buf_ptr++; +- tty->flip.count++; ++ tty_insert_flip_char(tty, data, flag); + info->icount.rx++; + } + +@@ -2320,7 +2388,6 @@ + */ + return; + #endif +- info->tty->flip.count = 0; + if (info->uses_dma_in) { + /* reset the input dma channel to be sure it works */ + +@@ -2482,70 +2549,21 @@ + { + struct tty_struct *tty; + struct etrax_recv_buffer *buffer; +- unsigned int length; + unsigned long flags; +- int max_flip_size; +- +- if (!info->first_recv_buffer) +- return; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); ++ tty = info->tty; + +- if (!(tty = info->tty)) { +- restore_flags(flags); ++ if (!tty) { ++ local_irq_restore(flags); + return; + } + +- length = tty->flip.count; +- /* Don't flip more than the ldisc has room for. +- * The return value from ldisc.receive_room(tty) - might not be up to +- * date, the previous flip of up to TTY_FLIPBUF_SIZE might be on the +- * processed and not accounted for yet. +- * Since we use DMA, 1 SERIAL_DESCR_BUF_SIZE could be on the way. +- * Lets buffer data here and let flow control take care of it. +- * Since we normally flip large chunks, the ldisc don't react +- * with throttle until too late if we flip to much. +- */ +- max_flip_size = tty->ldisc.receive_room(tty); +- if (max_flip_size < 0) +- max_flip_size = 0; +- if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */ +- length + info->recv_cnt + /* We have this queued */ +- 2*SERIAL_DESCR_BUF_SIZE + /* This could be on the way */ +- TTY_THRESHOLD_THROTTLE)) { /* Some slack */ +- /* check TTY_THROTTLED first so it indicates our state */ +- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { +- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles room %lu\n", max_flip_size)); +- rs_throttle(tty); +- } +-#if 0 +- else if (max_flip_size <= (TTY_FLIPBUF_SIZE + /* Maybe not accounted for */ +- length + info->recv_cnt + /* We have this queued */ +- SERIAL_DESCR_BUF_SIZE + /* This could be on the way */ +- TTY_THRESHOLD_THROTTLE)) { /* Some slack */ +- DFLOW(DEBUG_LOG(info->line,"flush_to_flip throttles again! %lu\n", max_flip_size)); +- rs_throttle(tty); +- } +-#endif +- } +- +- if (max_flip_size > TTY_FLIPBUF_SIZE) +- max_flip_size = TTY_FLIPBUF_SIZE; +- +- while ((buffer = info->first_recv_buffer) && length < max_flip_size) { ++ while ((buffer = info->first_recv_buffer)) { + unsigned int count = buffer->length; + +- if (length + count > max_flip_size) +- count = max_flip_size - length; +- +- memcpy(tty->flip.char_buf_ptr + length, buffer->buffer, count); +- memset(tty->flip.flag_buf_ptr + length, TTY_NORMAL, count); +- tty->flip.flag_buf_ptr[length] = buffer->error; +- +- length += count; ++ tty_insert_flip_string(tty, buffer->buffer, count); + info->recv_cnt -= count; +- DFLIP(DEBUG_LOG(info->line,"flip: %i\n", length)); + + if (count == buffer->length) { + info->first_recv_buffer = buffer->next; +@@ -2560,24 +2578,7 @@ + if (!info->first_recv_buffer) + info->last_recv_buffer = NULL; + +- tty->flip.count = length; +- DFLIP(if (tty->ldisc.chars_in_buffer(tty) > 3500) { +- DEBUG_LOG(info->line, "ldisc %lu\n", +- tty->ldisc.chars_in_buffer(tty)); +- DEBUG_LOG(info->line, "flip.count %lu\n", +- tty->flip.count); +- } +- ); +- restore_flags(flags); +- +- DFLIP( +- if (1) { +- DEBUG_LOG(info->line, "*** rxtot %i\n", info->icount.rx); +- DEBUG_LOG(info->line, "ldisc %lu\n", tty->ldisc.chars_in_buffer(tty)); +- DEBUG_LOG(info->line, "room %lu\n", tty->ldisc.receive_room(tty)); +- } +- +- ); ++ local_irq_restore(flags); + + /* this includes a check for low-latency */ + tty_flip_buffer_push(tty); +@@ -2722,21 +2723,7 @@ + printk("!NO TTY!\n"); + return info; + } +- if (tty->flip.count >= TTY_FLIPBUF_SIZE - TTY_THRESHOLD_THROTTLE) { +- /* check TTY_THROTTLED first so it indicates our state */ +- if (!test_and_set_bit(TTY_THROTTLED, &tty->flags)) { +- DFLOW(DEBUG_LOG(info->line, "rs_throttle flip.count: %i\n", tty->flip.count)); +- rs_throttle(tty); +- } +- } +- if (tty->flip.count >= TTY_FLIPBUF_SIZE) { +- DEBUG_LOG(info->line, "force FLIP! %i\n", tty->flip.count); +- tty->flip.work.func((void *) tty); +- if (tty->flip.count >= TTY_FLIPBUF_SIZE) { +- DEBUG_LOG(info->line, "FLIP FULL! %i\n", tty->flip.count); +- return info; /* if TTY_DONT_FLIP is set */ +- } +- } ++ + /* Read data and status at the same time */ + data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + more_data: +@@ -2789,27 +2776,25 @@ + DEBUG_LOG(info->line, "EBRK %i\n", info->break_detected_cnt); + info->errorcode = ERRCODE_INSERT_BREAK; + } else { ++ unsigned char data = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); ++ char flag = TTY_NORMAL; + if (info->errorcode == ERRCODE_INSERT_BREAK) { +- info->icount.brk++; +- *tty->flip.char_buf_ptr = 0; +- *tty->flip.flag_buf_ptr = TTY_BREAK; +- tty->flip.flag_buf_ptr++; +- tty->flip.char_buf_ptr++; +- tty->flip.count++; ++ struct tty_struct *tty = info->tty; ++ tty_insert_flip_char(tty, 0, flag); + info->icount.rx++; + } +- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); + + if (data_read & IO_MASK(R_SERIAL0_READ, par_err)) { + info->icount.parity++; +- *tty->flip.flag_buf_ptr = TTY_PARITY; ++ flag = TTY_PARITY; + } else if (data_read & IO_MASK(R_SERIAL0_READ, overrun)) { + info->icount.overrun++; +- *tty->flip.flag_buf_ptr = TTY_OVERRUN; ++ flag = TTY_OVERRUN; + } else if (data_read & IO_MASK(R_SERIAL0_READ, framing_err)) { + info->icount.frame++; +- *tty->flip.flag_buf_ptr = TTY_FRAME; ++ flag = TTY_FRAME; + } ++ tty_insert_flip_char(tty, data, flag); + info->errorcode = 0; + } + info->break_detected_cnt = 0; +@@ -2825,16 +2810,12 @@ + log_int(rdpc(), 0, 0); + } + ); +- *tty->flip.char_buf_ptr = IO_EXTRACT(R_SERIAL0_READ, data_in, data_read); +- *tty->flip.flag_buf_ptr = 0; ++ tty_insert_flip_char(tty, IO_EXTRACT(R_SERIAL0_READ, data_in, data_read), TTY_NORMAL); + } else { + DEBUG_LOG(info->line, "ser_rx int but no data_avail %08lX\n", data_read); + } + + +- tty->flip.flag_buf_ptr++; +- tty->flip.char_buf_ptr++; +- tty->flip.count++; + info->icount.rx++; + data_read = *((unsigned long *)&info->port[REG_DATA_STATUS32]); + if (data_read & IO_MASK(R_SERIAL0_READ, data_avail)) { +@@ -2972,7 +2953,7 @@ + if (info->x_char) { + unsigned char rstat; + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar 0x%02X\n", info->x_char)); +- save_flags(flags); cli(); ++ local_irq_save(flags); + rstat = info->port[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + +@@ -2981,7 +2962,7 @@ + info->x_char = 0; + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); +- restore_flags(flags); ++ local_irq_restore(flags); + return; + } + if (info->uses_dma_out) { +@@ -2989,7 +2970,7 @@ + int i; + /* We only use normal tx interrupt when sending x_char */ + DFLOW(DEBUG_LOG(info->line, "tx_int: xchar sent\n", 0)); +- save_flags(flags); cli(); ++ local_irq_save(flags); + rstat = info->port[REG_STATUS]; + DFLOW(DEBUG_LOG(info->line, "stat %x\n", rstat)); + e100_disable_serial_tx_ready_irq(info); +@@ -3002,7 +2983,7 @@ + nop(); + + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, continue); +- restore_flags(flags); ++ local_irq_restore(flags); + return; + } + /* Normal char-by-char interrupt */ +@@ -3016,7 +2997,7 @@ + } + DINTR2(DEBUG_LOG(info->line, "tx_int %c\n", info->xmit.buf[info->xmit.tail])); + /* Send a byte, rs485 timing is critical so turn of ints */ +- save_flags(flags); cli(); ++ local_irq_save(flags); + info->port[REG_TR_DATA] = info->xmit.buf[info->xmit.tail]; + info->xmit.tail = (info->xmit.tail + 1) & (SERIAL_XMIT_SIZE-1); + info->icount.tx++; +@@ -3040,7 +3021,7 @@ + /* We must enable since it is disabled in ser_interrupt */ + e100_enable_serial_tx_ready_irq(info); + } +- restore_flags(flags); ++ local_irq_restore(flags); + + if (CIRC_CNT(info->xmit.head, + info->xmit.tail, +@@ -3065,7 +3046,7 @@ + int handled = 0; + static volatile unsigned long reentered_ready_mask = 0; + +- save_flags(flags); cli(); ++ local_irq_save(flags); + irq_mask1_rd = *R_IRQ_MASK1_RD; + /* First handle all rx interrupts with ints disabled */ + info = rs_table; +@@ -3110,7 +3091,7 @@ + /* Unblock the serial interrupt */ + *R_VECT_MASK_SET = IO_STATE(R_VECT_MASK_SET, serial, set); + +- sti(); ++ local_irq_enable(); + ready_mask = (1 << (8+1+2*0)); /* ser0 tr_ready */ + info = rs_table; + for (i = 0; i < NR_PORTS; i++) { +@@ -3123,11 +3104,11 @@ + ready_mask <<= 2; + } + /* handle_ser_tx_interrupt enables tr_ready interrupts */ +- cli(); ++ local_irq_disable(); + /* Handle reentered TX interrupt */ + irq_mask1_rd = reentered_ready_mask; + } +- cli(); ++ local_irq_disable(); + tx_started = 0; + } else { + unsigned long ready_mask; +@@ -3143,7 +3124,7 @@ + } + } + +- restore_flags(flags); ++ local_irq_restore(flags); + return IRQ_RETVAL(handled); + } /* ser_interrupt */ + #endif +@@ -3192,13 +3173,12 @@ + if (!xmit_page) + return -ENOMEM; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + + /* if it was already initialized, skip this */ + + if (info->flags & ASYNC_INITIALIZED) { +- restore_flags(flags); ++ local_irq_restore(flags); + free_page(xmit_page); + return 0; + } +@@ -3324,7 +3304,7 @@ + + info->flags |= ASYNC_INITIALIZED; + +- restore_flags(flags); ++ local_irq_restore(flags); + return 0; + } + +@@ -3375,8 +3355,7 @@ + info->irq); + #endif + +- save_flags(flags); +- cli(); /* Disable interrupts */ ++ local_irq_save(flags); + + if (info->xmit.buf) { + free_page((unsigned long)info->xmit.buf); +@@ -3400,7 +3379,7 @@ + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; +- restore_flags(flags); ++ local_irq_restore(flags); + } + + +@@ -3492,8 +3471,7 @@ + + #ifndef CONFIG_SVINTO_SIM + /* start with default settings and then fill in changes */ +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + /* 8 bit, no/even parity */ + info->rx_ctrl &= ~(IO_MASK(R_SERIAL0_REC_CTRL, rec_bitnr) | + IO_MASK(R_SERIAL0_REC_CTRL, rec_par_en) | +@@ -3557,7 +3535,7 @@ + } + + *((unsigned long *)&info->port[REG_XOFF]) = xoff; +- restore_flags(flags); ++ local_irq_restore(flags); + #endif /* !CONFIG_SVINTO_SIM */ + + update_char_time(info); +@@ -3585,13 +3563,12 @@ + + /* this protection might not exactly be necessary here */ + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + start_transmit(info); +- restore_flags(flags); ++ local_irq_restore(flags); + } + +-static int rs_raw_write(struct tty_struct * tty, int from_user, ++static int rs_raw_write(struct tty_struct * tty, + const unsigned char *buf, int count) + { + int c, ret = 0; +@@ -3614,72 +3591,37 @@ + SIMCOUT(buf, count); + return count; + #endif +- save_flags(flags); ++ local_save_flags(flags); + DFLOW(DEBUG_LOG(info->line, "write count %i ", count)); + DFLOW(DEBUG_LOG(info->line, "ldisc %i\n", tty->ldisc.chars_in_buffer(tty))); + + +- /* the cli/restore_flags pairs below are needed because the ++ /* the local_irq_disable/restore_flags pairs below are needed because the + * DMA interrupt handler moves the info->xmit values. the memcpy + * needs to be in the critical region unfortunately, because we + * need to read xmit values, memcpy, write xmit values in one + * atomic operation... this could perhaps be avoided by more clever + * design. + */ +- if (from_user) { +- mutex_lock(&tmp_buf_mutex); +- while (1) { +- int c1; +- c = CIRC_SPACE_TO_END(info->xmit.head, +- info->xmit.tail, +- SERIAL_XMIT_SIZE); +- if (count < c) +- c = count; +- if (c <= 0) +- break; +- +- c -= copy_from_user(tmp_buf, buf, c); +- if (!c) { +- if (!ret) +- ret = -EFAULT; +- break; +- } +- cli(); +- c1 = CIRC_SPACE_TO_END(info->xmit.head, +- info->xmit.tail, +- SERIAL_XMIT_SIZE); +- if (c1 < c) +- c = c1; +- memcpy(info->xmit.buf + info->xmit.head, tmp_buf, c); +- info->xmit.head = ((info->xmit.head + c) & +- (SERIAL_XMIT_SIZE-1)); +- restore_flags(flags); +- buf += c; +- count -= c; +- ret += c; +- } +- mutex_unlock(&tmp_buf_mutex); +- } else { +- cli(); +- while (count) { +- c = CIRC_SPACE_TO_END(info->xmit.head, +- info->xmit.tail, +- SERIAL_XMIT_SIZE); +- +- if (count < c) +- c = count; +- if (c <= 0) +- break; +- +- memcpy(info->xmit.buf + info->xmit.head, buf, c); +- info->xmit.head = (info->xmit.head + c) & +- (SERIAL_XMIT_SIZE-1); +- buf += c; +- count -= c; +- ret += c; +- } +- restore_flags(flags); ++ local_irq_disable(); ++ while (count) { ++ c = CIRC_SPACE_TO_END(info->xmit.head, ++ info->xmit.tail, ++ SERIAL_XMIT_SIZE); ++ ++ if (count < c) ++ c = count; ++ if (c <= 0) ++ break; ++ ++ memcpy(info->xmit.buf + info->xmit.head, buf, c); ++ info->xmit.head = (info->xmit.head + c) & ++ (SERIAL_XMIT_SIZE-1); ++ buf += c; ++ count -= c; ++ ret += c; + } ++ local_irq_restore(flags); + + /* enable transmitter if not running, unless the tty is stopped + * this does not need IRQ protection since if tr_running == 0 +@@ -3698,7 +3640,7 @@ + } /* raw_raw_write() */ + + static int +-rs_write(struct tty_struct * tty, int from_user, ++rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) + { + #if defined(CONFIG_ETRAX_RS485) +@@ -3725,7 +3667,7 @@ + } + #endif /* CONFIG_ETRAX_RS485 */ + +- count = rs_raw_write(tty, from_user, buf, count); ++ count = rs_raw_write(tty, buf, count); + + #if defined(CONFIG_ETRAX_RS485) + if (info->rs485.enabled) +@@ -3793,10 +3735,9 @@ + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + info->xmit.head = info->xmit.tail = 0; +- restore_flags(flags); ++ local_irq_restore(flags); + + wake_up_interruptible(&tty->write_wait); + +@@ -3818,7 +3759,7 @@ + { + struct e100_serial *info = (struct e100_serial *)tty->driver_data; + unsigned long flags; +- save_flags(flags); cli(); ++ local_irq_save(flags); + if (info->uses_dma_out) { + /* Put the DMA on hold and disable the channel */ + *info->ocmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, hold); +@@ -3835,7 +3776,7 @@ + DFLOW(DEBUG_LOG(info->line, "rs_send_xchar 0x%02X\n", ch)); + info->x_char = ch; + e100_enable_serial_tx_ready_irq(info); +- restore_flags(flags); ++ local_irq_restore(flags); + } + + /* +@@ -4085,61 +4026,6 @@ + return 0; + } + +- +-static int +-set_modem_info(struct e100_serial * info, unsigned int cmd, +- unsigned int *value) +-{ +- unsigned int arg; +- +- if (copy_from_user(&arg, value, sizeof(int))) +- return -EFAULT; +- +- switch (cmd) { +- case TIOCMBIS: +- if (arg & TIOCM_RTS) { +- e100_rts(info, 1); +- } +- if (arg & TIOCM_DTR) { +- e100_dtr(info, 1); +- } +- /* Handle FEMALE behaviour */ +- if (arg & TIOCM_RI) { +- e100_ri_out(info, 1); +- } +- if (arg & TIOCM_CD) { +- e100_cd_out(info, 1); +- } +- break; +- case TIOCMBIC: +- if (arg & TIOCM_RTS) { +- e100_rts(info, 0); +- } +- if (arg & TIOCM_DTR) { +- e100_dtr(info, 0); +- } +- /* Handle FEMALE behaviour */ +- if (arg & TIOCM_RI) { +- e100_ri_out(info, 0); +- } +- if (arg & TIOCM_CD) { +- e100_cd_out(info, 0); +- } +- break; +- case TIOCMSET: +- e100_rts(info, arg & TIOCM_RTS); +- e100_dtr(info, arg & TIOCM_DTR); +- /* Handle FEMALE behaviour */ +- e100_ri_out(info, arg & TIOCM_RI); +- e100_cd_out(info, arg & TIOCM_CD); +- break; +- default: +- return -EINVAL; +- } +- return 0; +-} +- +- + static void + rs_break(struct tty_struct *tty, int break_state) + { +@@ -4149,8 +4035,7 @@ + if (!info->port) + return; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + if (break_state == -1) { + /* Go to manual mode and set the txd pin to 0 */ + info->tx_ctrl &= 0x3F; /* Clear bit 7 (txd) and 6 (tr_enable) */ +@@ -4158,7 +4043,42 @@ + info->tx_ctrl |= (0x80 | 0x40); /* Set bit 7 (txd) and 6 (tr_enable) */ + } + info->port[REG_TR_CTRL] = info->tx_ctrl; +- restore_flags(flags); ++ local_irq_restore(flags); ++} ++ ++static int ++rs_tiocmset(struct tty_struct *tty, struct file * file, unsigned int set, unsigned int clear) ++{ ++ struct e100_serial * info = (struct e100_serial *)tty->driver_data; ++ ++ if (clear & TIOCM_RTS) { ++ e100_rts(info, 0); ++ } ++ if (clear & TIOCM_DTR) { ++ e100_dtr(info, 0); ++ } ++ /* Handle FEMALE behaviour */ ++ if (clear & TIOCM_RI) { ++ e100_ri_out(info, 0); ++ } ++ if (clear & TIOCM_CD) { ++ e100_cd_out(info, 0); ++ } ++ ++ if (set & TIOCM_RTS) { ++ e100_rts(info, 1); ++ } ++ if (set & TIOCM_DTR) { ++ e100_dtr(info, 1); ++ } ++ /* Handle FEMALE behaviour */ ++ if (set & TIOCM_RI) { ++ e100_ri_out(info, 1); ++ } ++ if (set & TIOCM_CD) { ++ e100_cd_out(info, 1); ++ } ++ return 0; + } + + static int +@@ -4177,10 +4097,6 @@ + switch (cmd) { + case TIOCMGET: + return get_modem_info(info, (unsigned int *) arg); +- case TIOCMBIS: +- case TIOCMBIC: +- case TIOCMSET: +- return set_modem_info(info, cmd, (unsigned int *) arg); + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); +@@ -4212,7 +4128,7 @@ + if (copy_from_user(&rs485wr, (struct rs485_write*)arg, sizeof(rs485wr))) + return -EFAULT; + +- return e100_write_rs485(tty, 1, rs485wr.outc, rs485wr.outc_size); ++ return e100_write_rs485(tty, rs485wr.outc, rs485wr.outc_size); + } + #endif + +@@ -4242,46 +4158,6 @@ + + } + +-/* In debugport.c - register a console write function that uses the normal +- * serial driver +- */ +-typedef int (*debugport_write_function)(int i, const char *buf, unsigned int len); +- +-extern debugport_write_function debug_write_function; +- +-static int rs_debug_write_function(int i, const char *buf, unsigned int len) +-{ +- int cnt; +- int written = 0; +- struct tty_struct *tty; +- static int recurse_cnt = 0; +- +- tty = rs_table[i].tty; +- if (tty) { +- unsigned long flags; +- if (recurse_cnt > 5) /* We skip this debug output */ +- return 1; +- +- local_irq_save(flags); +- recurse_cnt++; +- local_irq_restore(flags); +- do { +- cnt = rs_write(tty, 0, buf + written, len); +- if (cnt >= 0) { +- written += cnt; +- buf += cnt; +- len -= cnt; +- } else +- len = cnt; +- } while(len > 0); +- local_irq_save(flags); +- recurse_cnt--; +- local_irq_restore(flags); +- return 1; +- } +- return 0; +-} +- + /* + * ------------------------------------------------------------ + * rs_close() +@@ -4303,11 +4179,10 @@ + + /* interrupts are disabled for this entire function */ + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + + if (tty_hung_up_p(filp)) { +- restore_flags(flags); ++ local_irq_restore(flags); + return; + } + +@@ -4334,7 +4209,7 @@ + info->count = 0; + } + if (info->count) { +- restore_flags(flags); ++ local_irq_restore(flags); + return; + } + info->flags |= ASYNC_CLOSING; +@@ -4388,7 +4263,7 @@ + } + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&info->close_wait); +- restore_flags(flags); ++ local_irq_restore(flags); + + /* port closed */ + +@@ -4410,6 +4285,28 @@ + #endif + } + #endif ++ ++ /* ++ * Release any allocated DMA irq's. ++ */ ++ if (info->dma_in_enabled) { ++ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); ++ free_irq(info->dma_in_irq_nbr, ++ info); ++ info->uses_dma_in = 0; ++#ifdef SERIAL_DEBUG_OPEN ++ printk("DMA irq '%s' freed\n", info->dma_in_irq_description); ++#endif ++ } ++ if (info->dma_out_enabled) { ++ free_irq(info->dma_out_irq_nbr, ++ info); ++ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); ++ info->uses_dma_out = 0; ++#ifdef SERIAL_DEBUG_OPEN ++ printk("DMA irq '%s' freed\n", info->dma_out_irq_description); ++#endif ++ } + } + + /* +@@ -4485,7 +4382,7 @@ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) +- interruptible_sleep_on(&info->close_wait); ++ wait_event_interruptible(info->close_wait, 0); + #ifdef SERIAL_DO_RESTART + if (info->flags & ASYNC_HUP_NOTIFY) + return -EAGAIN; +@@ -4523,21 +4420,19 @@ + printk("block_til_ready before block: ttyS%d, count = %d\n", + info->line, info->count); + #endif +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + if (!tty_hung_up_p(filp)) { + extra_count++; + info->count--; + } +- restore_flags(flags); ++ local_irq_restore(flags); + info->blocked_open++; + while (1) { +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + /* assert RTS and DTR */ + e100_rts(info, 1); + e100_dtr(info, 1); +- restore_flags(flags); ++ local_irq_restore(flags); + set_current_state(TASK_INTERRUPTIBLE); + if (tty_hung_up_p(filp) || + !(info->flags & ASYNC_INITIALIZED)) { +@@ -4589,9 +4484,9 @@ + struct e100_serial *info; + int retval, line; + unsigned long page; ++ int allocated_resources = 0; + + /* find which port we want to open */ +- + line = tty->index; + + if (line < 0 || line >= NR_PORTS) +@@ -4632,7 +4527,7 @@ + if (tty_hung_up_p(filp) || + (info->flags & ASYNC_CLOSING)) { + if (info->flags & ASYNC_CLOSING) +- interruptible_sleep_on(&info->close_wait); ++ wait_event_interruptible(info->close_wait, 0); + #ifdef SERIAL_DO_RESTART + return ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); +@@ -4642,12 +4537,79 @@ + } + + /* ++ * If DMA is enabled try to allocate the irq's. ++ */ ++ if (info->count == 1) { ++ allocated_resources = 1; ++ if (info->dma_in_enabled) { ++ if (request_irq(info->dma_in_irq_nbr, ++ rec_interrupt, ++ info->dma_in_irq_flags, ++ info->dma_in_irq_description, ++ info)) { ++ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description); ++ /* Make sure we never try to use DMA in for the port again. */ ++ info->dma_in_enabled = 0; ++ } else if (cris_request_dma(info->dma_in_nbr, ++ info->dma_in_irq_description, ++ DMA_VERBOSE_ON_ERROR, ++ info->dma_owner)) { ++ free_irq(info->dma_in_irq_nbr, info); ++ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_in_irq_description); ++ /* Make sure we never try to use DMA in for the port again. */ ++ info->dma_in_enabled = 0; ++ } ++#ifdef SERIAL_DEBUG_OPEN ++ else printk("DMA irq '%s' allocated\n", info->dma_in_irq_description); ++#endif ++ } ++ if (info->dma_out_enabled) { ++ if (request_irq(info->dma_out_irq_nbr, ++ tr_interrupt, ++ info->dma_out_irq_flags, ++ info->dma_out_irq_description, ++ info)) { ++ printk(KERN_WARNING "DMA irq '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description); ++ /* Make sure we never try to use DMA out for the port again. */ ++ info->dma_out_enabled = 0; ++ } else if (cris_request_dma(info->dma_out_nbr, ++ info->dma_out_irq_description, ++ DMA_VERBOSE_ON_ERROR, ++ info->dma_owner)) { ++ free_irq(info->dma_out_irq_nbr, info); ++ printk(KERN_WARNING "DMA '%s' busy; falling back to non-DMA mode\n", info->dma_out_irq_description); ++ /* Make sure we never try to use DMA in for the port again. */ ++ info->dma_out_enabled = 0; ++ } ++#ifdef SERIAL_DEBUG_OPEN ++ else printk("DMA irq '%s' allocated\n", info->dma_out_irq_description); ++#endif ++ } ++ } ++ ++ /* + * Start up the serial port + */ + + retval = startup(info); +- if (retval) +- return retval; ++ if (retval) { ++ if (allocated_resources) { ++ if (info->dma_out_enabled) { ++ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); ++ free_irq(info->dma_out_irq_nbr, ++ info); ++ } ++ if (info->dma_in_enabled) { ++ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); ++ free_irq(info->dma_in_irq_nbr, ++ info); ++ } ++ } ++ /* FIXME Decrease count info->count here too? */ ++ return retval; ++ ++ } ++ + + retval = block_til_ready(tty, filp, info); + if (retval) { +@@ -4655,6 +4617,19 @@ + printk("rs_open returning after block_til_ready with %d\n", + retval); + #endif ++ if (allocated_resources) { ++ if (info->dma_out_enabled) { ++ cris_free_dma(info->dma_out_nbr, info->dma_out_irq_description); ++ free_irq(info->dma_out_irq_nbr, ++ info); ++ } ++ if (info->dma_in_enabled) { ++ cris_free_dma(info->dma_in_nbr, info->dma_in_irq_description); ++ free_irq(info->dma_in_irq_nbr, ++ info); ++ } ++ } ++ + return retval; + } + +@@ -4844,6 +4819,7 @@ + .send_xchar = rs_send_xchar, + .wait_until_sent = rs_wait_until_sent, + .read_proc = rs_read_proc, ++ .tiocmset = rs_tiocmset + }; + + static int __init +@@ -4863,7 +4839,22 @@ + #if !defined(CONFIG_ETRAX_SERIAL_FAST_TIMER) + init_timer(&flush_timer); + flush_timer.function = timed_flush_handler; +- mod_timer(&flush_timer, jiffies + CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS); ++ mod_timer(&flush_timer, jiffies + 5); ++#endif ++ ++#if defined(CONFIG_ETRAX_RS485) ++#if defined(CONFIG_ETRAX_RS485_ON_PA) ++ if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, rs485_pa_bit)) { ++ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n"); ++ return -EBUSY; ++ } ++#endif ++#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) ++ if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, rs485_port_g_bit)) { ++ printk(KERN_CRIT "ETRAX100LX serial: Could not allocate RS485 pin\n"); ++ return -EBUSY; ++ } ++#endif + #endif + + /* Initialize the tty_driver structure */ +@@ -4888,6 +4879,14 @@ + /* do some initializing for the separate ports */ + + for (i = 0, info = rs_table; i < NR_PORTS; i++,info++) { ++ if (info->enabled) { ++ if (cris_request_io_interface(info->io_if, info->io_if_description)) { ++ printk(KERN_CRIT "ETRAX100LX async serial: Could not allocate IO pins for %s, port %d\n", ++ info->io_if_description, ++ i); ++ info->enabled = 0; ++ } ++ } + info->uses_dma_in = 0; + info->uses_dma_out = 0; + info->line = i; +@@ -4939,64 +4938,16 @@ + #endif + + #ifndef CONFIG_SVINTO_SIM ++#ifndef CONFIG_ETRAX_KGDB + /* Not needed in simulator. May only complicate stuff. */ + /* hook the irq's for DMA channel 6 and 7, serial output and input, and some more... */ + +- if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", NULL)) +- panic("irq8"); +- +-#ifdef CONFIG_ETRAX_SERIAL_PORT0 +-#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT +- if (request_irq(SER0_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 0 dma tr", NULL)) +- panic("irq22"); +-#endif +-#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN +- if (request_irq(SER0_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 0 dma rec", NULL)) +- panic("irq23"); +-#endif +-#endif +- +-#ifdef CONFIG_ETRAX_SERIAL_PORT1 +-#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT +- if (request_irq(SER1_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_DISABLED, "serial 1 dma tr", NULL)) +- panic("irq24"); +-#endif +-#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN +- if (request_irq(SER1_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_DISABLED, "serial 1 dma rec", NULL)) +- panic("irq25"); +-#endif +-#endif +-#ifdef CONFIG_ETRAX_SERIAL_PORT2 +- /* DMA Shared with par0 (and SCSI0 and ATA) */ +-#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT +- if (request_irq(SER2_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma tr", NULL)) +- panic("irq18"); +-#endif +-#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN +- if (request_irq(SER2_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 2 dma rec", NULL)) +- panic("irq19"); +-#endif +-#endif +-#ifdef CONFIG_ETRAX_SERIAL_PORT3 +- /* DMA Shared with par1 (and SCSI1 and Extern DMA 0) */ +-#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT +- if (request_irq(SER3_DMA_TX_IRQ_NBR, tr_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma tr", NULL)) +- panic("irq20"); +-#endif +-#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN +- if (request_irq(SER3_DMA_RX_IRQ_NBR, rec_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial 3 dma rec", NULL)) +- panic("irq21"); +-#endif +-#endif ++ if (request_irq(SERIAL_IRQ_NBR, ser_interrupt, IRQF_SHARED | IRQF_DISABLED, "serial ", driver)) ++ panic("%s: Failed to request irq8", __FUNCTION__); + +-#ifdef CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST +- if (request_irq(TIMER1_IRQ_NBR, timeout_interrupt, IRQF_SHARED | IRQF_DISABLED, +- "fast serial dma timeout", NULL)) { +- printk(KERN_CRIT "err: timer1 irq\n"); +- } + #endif + #endif /* CONFIG_SVINTO_SIM */ +- debug_write_function = rs_debug_write_function; ++ + return 0; + } + +--- linux-2.6.19.2.orig/drivers/serial/crisv10.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/serial/crisv10.h 2006-10-13 14:44:38.000000000 +0200 +@@ -9,6 +9,8 @@ + + #include <linux/circ_buf.h> + #include <asm/termios.h> ++#include <asm/dma.h> ++#include <asm/arch/io_interface_mux.h> + + /* Software state per channel */ + +@@ -61,6 +63,19 @@ + u8 dma_in_enabled:1; /* Set to 1 if DMA should be used */ + + /* end of fields defined in rs_table[] in .c-file */ ++ int dma_owner; ++ unsigned int dma_in_nbr; ++ unsigned int dma_out_nbr; ++ unsigned int dma_in_irq_nbr; ++ unsigned int dma_out_irq_nbr; ++ unsigned long dma_in_irq_flags; ++ unsigned long dma_out_irq_flags; ++ char *dma_in_irq_description; ++ char *dma_out_irq_description; ++ ++ enum cris_io_interface io_if; ++ char *io_if_description; ++ + u8 uses_dma_in; /* Set to 1 if DMA is used */ + u8 uses_dma_out; /* Set to 1 if DMA is used */ + u8 forced_eop; /* a fifo eop has been forced */ +--- linux-2.6.19.2.orig/drivers/serial/crisv32.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/serial/crisv32.c 2007-01-05 09:59:53.000000000 +0100 +@@ -0,0 +1,2333 @@ ++/* $Id: crisv32.c,v 1.78 2007/01/05 08:59:53 starvik Exp $ ++ * ++ * Serial port driver for the ETRAX FS chip ++ * ++ * Copyright (C) 1998-2006 Axis Communications AB ++ * ++ * Many, many authors. Based once upon a time on serial.c for 16x50. ++ * ++ * Johan Adolfsson - port to ETRAX FS ++ * Mikael Starvik - port to serial_core framework ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/console.h> ++#include <linux/types.h> ++#include <linux/errno.h> ++#include <linux/serial_core.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/uaccess.h> ++ ++#include <asm/arch/dma.h> ++#include <asm/arch/system.h> ++#include <asm/arch/pinmux.h> ++#include <asm/arch/hwregs/dma.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/ser_defs.h> ++#include <asm/arch/hwregs/dma_defs.h> ++#include <asm/arch/hwregs/gio_defs.h> ++#include <asm/arch/hwregs/intr_vect_defs.h> ++#include <asm/arch/hwregs/reg_map.h> ++ ++#define UART_NR 5 /* 4 ports + dummy port */ ++#define SERIAL_RECV_DESCRIPTORS 8 ++ ++/* We only buffer 255 characters here, no need for more tx descriptors. */ ++#define SERIAL_TX_DESCRIPTORS 4 ++ ++/* Kept for experimental purposes. */ ++#define ETRAX_SER_FIFO_SIZE 1 ++#define SERIAL_DESCR_BUF_SIZE 256 ++#define regi_NULL 0 ++#define DMA_WAIT_UNTIL_RESET(inst) \ ++ do { \ ++ reg_dma_rw_stat r; \ ++ do { \ ++ r = REG_RD(dma, (inst), rw_stat); \ ++ } while (r.mode != regk_dma_rst); \ ++ } while (0) ++ ++/* Macro to set up control lines for a port. */ ++#define SETUP_PINS(port) \ ++ if (serial_cris_ports[port].used) { \ ++ if (strcmp(CONFIG_ETRAX_SER##port##_DTR_BIT, "")) \ ++ crisv32_io_get_name(&serial_cris_ports[port].dtr_pin, \ ++ CONFIG_ETRAX_SER##port##_DTR_BIT); \ ++ else \ ++ serial_cris_ports[port].dtr_pin = dummy_pin; \ ++ if (strcmp(CONFIG_ETRAX_SER##port##_DSR_BIT, "")) \ ++ crisv32_io_get_name(&serial_cris_ports[port].dsr_pin, \ ++ CONFIG_ETRAX_SER##port##_DSR_BIT); \ ++ else \ ++ serial_cris_ports[port].dsr_pin = dummy_pin; \ ++ if (strcmp(CONFIG_ETRAX_SER##port##_RI_BIT, "")) \ ++ crisv32_io_get_name(&serial_cris_ports[port].ri_pin, \ ++ CONFIG_ETRAX_SER##port##_RI_BIT); \ ++ else \ ++ serial_cris_ports[port].ri_pin = dummy_pin; \ ++ if (strcmp(CONFIG_ETRAX_SER##port##_CD_BIT, "")) \ ++ crisv32_io_get_name(&serial_cris_ports[port].cd_pin, \ ++ CONFIG_ETRAX_SER##port##_CD_BIT); \ ++ else \ ++ serial_cris_ports[port].cd_pin = dummy_pin; \ ++ } ++ ++/* Set a serial port register if anything has changed. */ ++#define MODIFY_REG(instance, reg, var) \ ++ if (REG_RD_INT(ser, instance, reg) \ ++ != REG_TYPE_CONV(int, reg_ser_##reg, var)) \ ++ REG_WR(ser, instance, reg, var); ++ ++/* ++ * Regarding RS485 operation in crisv32 serial driver. ++ * --------------------------------------------------- ++ * RS485 can be run in two modes, full duplex using four wires (485FD) and ++ * half duplex using two wires (485HD). The default mode of each serial port ++ * is configured in the kernel configuration. The available modes are: ++ * RS-232, RS-485 half duplex, and RS-485 full duplex. ++ * ++ * In the 485HD mode the direction of the data bus must be able to switch. ++ * The direction of the transceiver is controlled by the RTS signal. Hence ++ * the auto_rts function in the ETRAX FS chip is enabled in this mode, which ++ * automatically toggle RTS when transmitting. The initial direction of the ++ * port is receiving. ++ * ++ * In the 485FD mode two transceivers will be used, one in each direction. ++ * Usually the hardware can handle both 485HD and 485FD, which implies that ++ * one of the transceivers can change direction. Consequently that transceiver ++ * must be tied to operate in the opposite direction of the other one, setting ++ * and keeping RTS to a fixed value do this. ++ * ++ * There are two special "ioctl" that can configure the ports. These two are ++ * left for backward compatible with older applications. The effects of using ++ * them are described below: ++ * The TIOCSERSETRS485: ++ * This ioctl sets a serial port in 232 mode to 485HD mode or vise versa. The ++ * state of the port is kept when closing the port. Note that this ioctl has no ++ * effect on a serial port in the 485FD mode. ++ * The TIOCSERWRRS485: ++ * This ioctl set a serial port in 232 mode to 485HD mode and writes the data ++ * "included" in the ioctl to the port. The port will then stay in 485HD mode. ++ * Using this ioctl on a serial port in the 485HD mode will transmit the data ++ * without changing the mode. Using this ioctl on a serial port in 485FD mode ++ * will not change the mode and simply send the data using the 485FD mode. ++ */ ++ ++#define TYPE_232 0 ++#define TYPE_485HD 1 ++#define TYPE_485FD 2 ++ ++struct etrax_recv_buffer { ++ struct etrax_recv_buffer *next; ++ unsigned short length; ++ unsigned char error; ++ unsigned char pad; ++ ++ unsigned char buffer[0]; ++}; ++ ++struct uart_cris_port { ++ struct uart_port port; ++ ++ int initialized; ++ int used; ++ int irq; ++ ++ /* Used to check if port enabled as well by testing for zero. */ ++ reg_scope_instances regi_ser; ++ reg_scope_instances regi_dmain; ++ reg_scope_instances regi_dmaout; ++ ++ struct crisv32_iopin dtr_pin; ++ struct crisv32_iopin dsr_pin; ++ struct crisv32_iopin ri_pin; ++ struct crisv32_iopin cd_pin; ++ ++ struct dma_descr_context tr_context_descr ++ __attribute__ ((__aligned__(32))); ++ struct dma_descr_data tr_descr[SERIAL_TX_DESCRIPTORS] ++ __attribute__ ((__aligned__(32))); ++ struct dma_descr_context rec_context_descr ++ __attribute__ ((__aligned__(32))); ++ struct dma_descr_data rec_descr[SERIAL_RECV_DESCRIPTORS] ++ __attribute__ ((__aligned__(32))); ++ ++ /* This is the first one in the list the HW is working on now. */ ++ struct dma_descr_data* first_tx_descr; ++ ++ /* This is the last one in the list the HW is working on now. */ ++ struct dma_descr_data* last_tx_descr; ++ ++ /* This is how many characters the HW is working on now. */ ++ unsigned int tx_pending_chars; ++ ++ int tx_started; ++ unsigned int cur_rec_descr; ++ struct etrax_recv_buffer *first_recv_buffer; ++ struct etrax_recv_buffer *last_recv_buffer; ++ ++ unsigned int recv_cnt; ++ unsigned int max_recv_cnt; ++ ++ /* The time for 1 char, in usecs. */ ++ unsigned long char_time_usec; ++ ++ /* Last tx usec in the jiffies. */ ++ unsigned long last_tx_active_usec; ++ ++ /* Last tx time in jiffies. */ ++ unsigned long last_tx_active; ++ ++ /* Last rx usec in the jiffies. */ ++ unsigned long last_rx_active_usec; ++ ++ /* Last rx time in jiffies. */ ++ unsigned long last_rx_active; ++ ++#ifdef CONFIG_ETRAX_RS485 ++ /* RS-485 support, duh. */ ++ struct rs485_control rs485; ++#endif ++ int port_type; ++}; ++ ++extern struct uart_driver serial_cris_driver; ++static struct uart_port *console_port; ++static int console_baud = 115200; ++static struct uart_cris_port serial_cris_ports[UART_NR] = { ++{ ++#ifdef CONFIG_ETRAX_SERIAL_PORT0 ++ .used = 1, ++ .irq = SER0_INTR_VECT, ++ .regi_ser = regi_ser0, ++ /* ++ * We initialize the dma stuff like this to get a compiler error ++ * if a CONFIG is missing ++ */ ++ .regi_dmain = ++# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN ++ regi_dma7, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN ++ regi_NULL, ++# endif ++ ++ .regi_dmaout = ++# ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT ++ regi_dma6, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT ++ regi_NULL, ++# endif ++ ++# ifdef CONFIG_ETRAX_RS485 ++# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485HD ++ .port_type = TYPE_485HD, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT0_TYPE_485FD ++ .port_type = TYPE_485FD, ++# endif ++# endif ++#else ++ .regi_ser = regi_NULL, ++ .regi_dmain = regi_NULL, ++ .regi_dmaout = regi_NULL, ++#endif ++}, /* ttyS0 */ ++{ ++#ifdef CONFIG_ETRAX_SERIAL_PORT1 ++ .used = 1, ++ .irq = SER1_INTR_VECT, ++ .regi_ser = regi_ser1, ++ .regi_dmain = ++# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN ++ regi_dma5, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN ++ regi_NULL, ++# endif ++ ++ .regi_dmaout = ++# ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT ++ regi_dma4, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT ++ regi_NULL, ++# endif ++ ++# ifdef CONFIG_ETRAX_RS485 ++# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485HD ++ .port_type = TYPE_485HD, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT1_TYPE_485FD ++ .port_type = TYPE_485FD, ++# endif ++# endif ++#else ++ .regi_ser = regi_NULL, ++ .regi_dmain = regi_NULL, ++ .regi_dmaout = regi_NULL, ++#endif ++}, /* ttyS1 */ ++{ ++#ifdef CONFIG_ETRAX_SERIAL_PORT2 ++ .used = 1, ++ .irq = SER2_INTR_VECT, ++ .regi_ser = regi_ser2, ++ .regi_dmain = ++# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN ++ regi_dma3, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN ++ regi_NULL, ++# endif ++ ++ .regi_dmaout = ++# ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT ++ regi_dma2, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT ++ regi_NULL, ++# endif ++ ++# ifdef CONFIG_ETRAX_RS485 ++# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485HD ++ .port_type = TYPE_485HD, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT2_TYPE_485FD ++ .port_type = TYPE_485FD, ++# endif ++# endif ++#else ++ .regi_ser = regi_NULL, ++ .regi_dmain = regi_NULL, ++ .regi_dmaout = regi_NULL, ++#endif ++}, /* ttyS2 */ ++{ ++#ifdef CONFIG_ETRAX_SERIAL_PORT3 ++ .used = 1, ++ .irq = SER3_INTR_VECT, ++ .regi_ser = regi_ser3, ++ .regi_dmain = ++# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN ++ regi_dma9, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN ++ regi_NULL, ++# endif ++ ++ .regi_dmaout = ++# ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT ++ regi_dma8, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT ++ regi_NULL, ++# endif ++ ++# ifdef CONFIG_ETRAX_RS485 ++# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485HD ++ .port_type = TYPE_485HD, ++# endif ++# ifdef CONFIG_ETRAX_SERIAL_PORT3_TYPE_485FD ++ .port_type = TYPE_485FD, ++# endif ++# endif ++#else ++ .regi_ser = regi_NULL, ++ .regi_dmain = regi_NULL, ++ .regi_dmaout = regi_NULL, ++#endif ++}, /* ttyS3 */ ++{ ++#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL ++ .used = 1, ++#endif ++ .regi_ser = regi_NULL ++} /* Dummy console port */ ++ ++}; ++ ++/* Dummy pin used for unused CD, DSR, DTR and RI signals. */ ++static unsigned long io_dummy; ++static struct crisv32_ioport dummy_port = ++{ ++ &io_dummy, ++ &io_dummy, ++ &io_dummy, ++ 18 ++}; ++static struct crisv32_iopin dummy_pin = ++{ ++ &dummy_port, ++ 0 ++}; ++ ++static int selected_console = ++#if defined(CONFIG_ETRAX_DEBUG_PORT0) ++0; ++#elif defined(CONFIG_ETRAX_DEBUG_PORT1) ++1; ++#elif defined(CONFIG_ETRAX_DEBUG_PORT2) ++2; ++#elif defined(CONFIG_ETRAX_DEBUG_PORT3) ++3; ++#else /* CONFIG_ETRAX_DEBUG_PORT_NULL */ ++4; ++#endif ++ ++extern void reset_watchdog(void); ++ ++/* ++ * Interrupts are disabled on entering ++ */ ++static void ++cris_console_write(struct console *co, const char *s, unsigned int count) ++{ ++ struct uart_cris_port *up; ++ int i; ++ reg_ser_r_stat_din stat; ++ reg_ser_rw_tr_dma_en tr_dma_en, old; ++ ++ up = &serial_cris_ports[selected_console]; ++ ++ /* ++ * This function isn't covered by the struct uart_ops, so we ++ * have to check manually that the port really is there, ++ * configured and live. ++ */ ++ if (!up->regi_ser) ++ return; ++ ++ /* Switch to manual mode. */ ++ tr_dma_en = old = REG_RD (ser, up->regi_ser, rw_tr_dma_en); ++ if (tr_dma_en.en == regk_ser_yes) { ++ tr_dma_en.en = regk_ser_no; ++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); ++ } ++ ++ /* Send data. */ ++ for (i = 0; i < count; i++) { ++ /* LF -> CRLF */ ++ if (s[i] == '\n') { ++ do { ++ stat = REG_RD (ser, up->regi_ser, r_stat_din); ++ } while (!stat.tr_rdy); ++ REG_WR_INT (ser, up->regi_ser, rw_dout, '\r'); ++ } ++ /* Wait until transmitter is ready and send. */ ++ do { ++ stat = REG_RD (ser, up->regi_ser, r_stat_din); ++ } while (!stat.tr_rdy); ++ REG_WR_INT (ser, up->regi_ser, rw_dout, s[i]); ++ ++ /* Feed watchdog, because this may take looong time. */ ++ reset_watchdog(); ++ } ++ ++ /* Restore mode. */ ++ if (tr_dma_en.en != old.en) ++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, old); ++} ++ ++static void cris_serial_port_init(struct uart_port *port, int line); ++static int __init ++cris_console_setup(struct console *co, char *options) ++{ ++ struct uart_port *port; ++ int baud = 115200; ++ int bits = 8; ++ int parity = 'n'; ++ int flow = 'n'; ++ ++ if (co->index >= UART_NR) ++ co->index = 0; ++ if (options) ++ selected_console = co->index; ++ port = &serial_cris_ports[selected_console].port; ++ console_port = port; ++ ++ if (options) ++ uart_parse_options(options, &baud, &parity, &bits, &flow); ++ console_baud = baud; ++ cris_serial_port_init(port, selected_console); ++ co->index = port->line; ++ uart_set_options(port, co, baud, parity, bits, flow); ++ ++ return 0; ++} ++ ++static struct tty_driver* ++cris_console_device(struct console* co, int *index) ++{ ++ struct uart_driver *p = co->data; ++ *index = selected_console; ++ return p->tty_driver; ++} ++ ++static struct console cris_console = { ++ .name = "ttyS", ++ .write = cris_console_write, ++ .device = cris_console_device, ++ .setup = cris_console_setup, ++ .flags = CON_PRINTBUFFER, ++ .index = -1, ++ .data = &serial_cris_driver, ++}; ++ ++#define SERIAL_CRIS_CONSOLE &cris_console ++ ++struct uart_driver serial_cris_driver = { ++ .owner = THIS_MODULE, ++ .driver_name = "serial", ++ .dev_name = "ttyS", ++ .major = TTY_MAJOR, ++ .minor = 64, ++ .nr = UART_NR, ++ .cons = SERIAL_CRIS_CONSOLE, ++}; ++ ++static int inline crisv32_serial_get_rts(struct uart_cris_port *up) ++{ ++ reg_scope_instances regi_ser = up->regi_ser; ++ /* ++ * Return what the user has controlled rts to or ++ * what the pin is? (if auto_rts is used it differs during tx) ++ */ ++ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); ++ return !(rstat.rts_n == regk_ser_active); ++} ++ ++/* ++ * A set = 0 means 3.3V on the pin, bitvalue: 0=active, 1=inactive ++ * 0=0V , 1=3.3V ++ */ ++static inline void crisv32_serial_set_rts(struct uart_cris_port *up, int set) ++{ ++ reg_scope_instances regi_ser = up->regi_ser; ++ ++#ifdef CONFIG_ETRAX_RS485 ++ /* Never toggle RTS if port is in 485 mode. If port is in 485FD mode we ++ * do not want to send with the reciever and for 485HD mode auto_rts ++ * take care of the RTS for us. ++ */ ++ if (!up->rs485.enabled) { ++#else ++ { ++#endif ++ unsigned long flags; ++ reg_ser_rw_rec_ctrl rec_ctrl; ++ ++ local_irq_save(flags); ++ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); ++ if (set) ++ rec_ctrl.rts_n = regk_ser_active; ++ else ++ rec_ctrl.rts_n = regk_ser_inactive; ++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); ++ local_irq_restore(flags); ++ } ++} ++ ++/* Input */ ++static int inline crisv32_serial_get_cts(struct uart_cris_port *up) ++{ ++ reg_scope_instances regi_ser = up->regi_ser; ++ reg_ser_r_stat_din rstat = REG_RD(ser, regi_ser, r_stat_din); ++ return (rstat.cts_n == regk_ser_active); ++} ++ ++/* ++ * Send a single character for XON/XOFF purposes. We do it in this separate ++ * function instead of the alternative support port.x_char, in the ...start_tx ++ * function, so we don't mix up this case with possibly enabling transmission ++ * of queued-up data (in case that's disabled after *receiving* an XOFF or ++ * negative CTS). This function is used for both DMA and non-DMA case; see HW ++ * docs specifically blessing sending characters manually when DMA for ++ * transmission is enabled and running. We may be asked to transmit despite ++ * the transmitter being disabled by a ..._stop_tx call so we need to enable ++ * it temporarily but restore the state afterwards. ++ * ++ * Beware: I'm not sure how the RS-485 stuff is supposed to work. Using ++ * XON/XOFF seems problematic if there are several controllers, but if it's ++ * actually RS-422 (multi-drop; one sender and multiple receivers), it might ++ * Just Work, so don't bail out just because it looks a little suspicious. ++ */ ++ ++void serial_cris_send_xchar(struct uart_port *port, char ch) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ reg_ser_rw_dout dout = { .data = ch }; ++ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; ++ reg_ser_r_stat_din rstat; ++ reg_ser_rw_tr_ctrl prev_tr_ctrl, tr_ctrl; ++ reg_scope_instances regi_ser = up->regi_ser; ++ unsigned long flags; ++ ++ /* ++ * Wait for tr_rdy in case a character is already being output. Make ++ * sure we have integrity between the register reads and the writes ++ * below, but don't busy-wait with interrupts off and the port lock ++ * taken. ++ */ ++ spin_lock_irqsave(&port->lock, flags); ++ do { ++ spin_unlock_irqrestore(&port->lock, flags); ++ spin_lock_irqsave(&port->lock, flags); ++ prev_tr_ctrl = tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); ++ rstat = REG_RD(ser, regi_ser, r_stat_din); ++ } while (!rstat.tr_rdy); ++ ++ /* ++ * Ack an interrupt if one was just issued for the previous character ++ * that was output. This is required for non-DMA as the interrupt is ++ * used as the only indicator that the transmitter is ready and it ++ * isn't while this x_char is being transmitted. ++ */ ++ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); ++ ++ /* Enable the transmitter in case it was disabled. */ ++ tr_ctrl.stop = 0; ++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); ++ ++ /* ++ * Finally, send the blessed character; nothing should stop it now, ++ * except for an xoff-detected state, which we'll handle below. ++ */ ++ REG_WR(ser, regi_ser, rw_dout, dout); ++ up->port.icount.tx++; ++ ++ /* There might be an xoff state to clear. */ ++ rstat = REG_RD(ser, up->regi_ser, r_stat_din); ++ ++ /* ++ * Clear any xoff state that *may* have been there to ++ * inhibit transmission of the character. ++ */ ++ if (rstat.xoff_detect) { ++ reg_ser_rw_xoff_clr xoff_clr = { .clr = 1 }; ++ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); ++ reg_ser_rw_tr_dma_en tr_dma_en ++ = REG_RD(ser, regi_ser, rw_tr_dma_en); ++ ++ /* ++ * If we had an xoff state but cleared it, instead sneak in a ++ * disabled state for the transmitter, after the character we ++ * sent. Thus we keep the port disabled, just as if the xoff ++ * state was still in effect (or actually, as if stop_tx had ++ * been called, as we stop DMA too). ++ */ ++ prev_tr_ctrl.stop = 1; ++ ++ tr_dma_en.en = 0; ++ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); ++ } ++ ++ /* Restore "previous" enabled/disabled state of the transmitter. */ ++ REG_WR(ser, regi_ser, rw_tr_ctrl, prev_tr_ctrl); ++ ++ spin_unlock_irqrestore(&port->lock, flags); ++} ++ ++static void transmit_chars_dma(struct uart_cris_port *up); ++ ++/* ++ * Do not spin_lock_irqsave or disable interrupts by other means here; it's ++ * already done by the caller. ++ */ ++ ++static void serial_cris_start_tx(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ reg_scope_instances regi_ser = up->regi_ser; ++ reg_ser_rw_tr_ctrl tr_ctrl; ++ ++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); ++ tr_ctrl.stop = regk_ser_no; ++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); ++ if (!up->regi_dmaout) { ++ reg_ser_rw_intr_mask intr_mask = ++ REG_RD(ser, regi_ser, rw_intr_mask); ++ intr_mask.tr_rdy = regk_ser_yes; ++ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); ++ } else { ++ /* ++ * We're called possibly to re-enable transmission after it ++ * has been disabled. If so, DMA needs to be re-enabled. ++ */ ++ reg_ser_rw_tr_dma_en tr_dma_en = { .en = 1 }; ++ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); ++ transmit_chars_dma(up); ++ } ++} ++ ++/* ++ * This function handles both the DMA and non-DMA case by ordering the ++ * transmitter to stop of after the current character. We don't need to wait ++ * for any such character to be completely transmitted; we do that where it ++ * matters, like in serial_cris_set_termios. Don't busy-wait here; see ++ * Documentation/serial/driver: this function is called within ++ * spin_lock_irq{,save} and thus separate ones would be disastrous (when SMP). ++ * There's no documented need to set the txd pin to any particular value; ++ * break setting is controlled solely by serial_cris_break_ctl. ++ */ ++ ++static void serial_cris_stop_tx(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ reg_scope_instances regi_ser = up->regi_ser; ++ reg_ser_rw_tr_ctrl tr_ctrl; ++ reg_ser_rw_intr_mask intr_mask; ++ reg_ser_rw_tr_dma_en tr_dma_en = {0}; ++ reg_ser_rw_xoff_clr xoff_clr = {0}; ++ ++ /* ++ * For the non-DMA case, we'd get a tr_rdy interrupt that we're not ++ * interested in as we're not transmitting any characters. For the ++ * DMA case, that interrupt is already turned off, but no reason to ++ * waste code on conditionals here. ++ */ ++ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); ++ intr_mask.tr_rdy = regk_ser_no; ++ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); ++ ++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); ++ tr_ctrl.stop = 1; ++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); ++ ++ /* ++ * Always clear possible hardware xoff-detected state here, no need to ++ * unnecessary consider mctrl settings and when they change. We clear ++ * it here rather than in start_tx: both functions are called as the ++ * effect of XOFF processing, but start_tx is also called when upper ++ * levels tell the driver that there are more characters to send, so ++ * avoid adding code there. ++ */ ++ xoff_clr.clr = 1; ++ REG_WR(ser, regi_ser, rw_xoff_clr, xoff_clr); ++ ++ /* ++ * Disable transmitter DMA, so that if we're in XON/XOFF, we can send ++ * those single characters without also giving go-ahead for queued up ++ * DMA data. ++ */ ++ tr_dma_en.en = 0; ++ REG_WR(ser, regi_ser, rw_tr_dma_en, tr_dma_en); ++} ++ ++static void serial_cris_stop_rx(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ reg_scope_instances regi_ser = up->regi_ser; ++ reg_ser_rw_rec_ctrl rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); ++ ++ rec_ctrl.en = regk_ser_no; ++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); ++} ++ ++static void serial_cris_enable_ms(struct uart_port *port) ++{ ++} ++ ++static void check_modem_status(struct uart_cris_port *up) ++{ ++} ++ ++static unsigned int serial_cris_tx_empty(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ unsigned long flags; ++ unsigned int ret; ++ reg_ser_r_stat_din rstat = {0}; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ if (up->regi_dmaout) { ++ /* ++ * For DMA, before looking at r_stat, we need to check that we ++ * either haven't actually started or that end-of-list is ++ * reached, else a tr_empty indication is just an internal ++ * state. The caller qualifies, if needed, that the ++ * port->info.xmit buffer is empty, so we don't need to ++ * check that. ++ */ ++ reg_dma_rw_stat status = REG_RD(dma, up->regi_dmaout, rw_stat); ++ ++ if (!up->tx_started) { ++ ret = 1; ++ goto done; ++ } ++ ++ if (status.list_state != regk_dma_data_at_eol) { ++ ret = 0; ++ goto done; ++ } ++ } ++ ++ rstat = REG_RD(ser, up->regi_ser, r_stat_din); ++ ret = rstat.tr_empty ? TIOCSER_TEMT : 0; ++ ++ done: ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ return ret; ++} ++static unsigned int serial_cris_get_mctrl(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ unsigned int ret; ++ ++ ret = 0; ++ if (crisv32_serial_get_rts(up)) ++ ret |= TIOCM_RTS; ++ if (crisv32_io_rd(&up->dtr_pin)) ++ ret |= TIOCM_DTR; ++ if (crisv32_io_rd(&up->cd_pin)) ++ ret |= TIOCM_CD; ++ if (crisv32_io_rd(&up->ri_pin)) ++ ret |= TIOCM_RI; ++ if (!crisv32_io_rd(&up->dsr_pin)) ++ ret |= TIOCM_DSR; ++ if (crisv32_serial_get_cts(up)) ++ ret |= TIOCM_CTS; ++ return ret; ++} ++ ++static void serial_cris_set_mctrl(struct uart_port *port, unsigned int mctrl) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ ++ crisv32_serial_set_rts(up, mctrl & TIOCM_RTS ? 1 : 0); ++ crisv32_io_set(&up->dtr_pin, mctrl & TIOCM_DTR ? 1 : 0); ++ crisv32_io_set(&up->ri_pin, mctrl & TIOCM_RNG ? 1 : 0); ++ crisv32_io_set(&up->cd_pin, mctrl & TIOCM_CD ? 1 : 0); ++} ++ ++static void serial_cris_break_ctl(struct uart_port *port, int break_state) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ unsigned long flags; ++ reg_ser_rw_tr_ctrl tr_ctrl; ++ reg_ser_rw_tr_dma_en tr_dma_en; ++ reg_ser_rw_intr_mask intr_mask; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ tr_ctrl = REG_RD(ser, up->regi_ser, rw_tr_ctrl); ++ tr_dma_en = REG_RD(ser, up->regi_ser, rw_tr_dma_en); ++ intr_mask = REG_RD(ser, up->regi_ser, rw_intr_mask); ++ ++ if (break_state != 0) { /* Send break */ ++ /* ++ * We need to disable DMA (if used) or tr_rdy interrupts if no ++ * DMA. No need to make this conditional on use of DMA; ++ * disabling will be a no-op for the other mode. ++ */ ++ intr_mask.tr_rdy = regk_ser_no; ++ tr_dma_en.en = 0; ++ ++ /* ++ * Stop transmission and set the txd pin to 0 after the ++ * current character. The txd setting will take effect after ++ * any current transmission has completed. ++ */ ++ tr_ctrl.stop = 1; ++ tr_ctrl.txd = 0; ++ } else { ++ /* Re-enable either transmit DMA or the serial interrupt. */ ++ if (up->regi_dmaout) ++ tr_dma_en.en = 1; ++ else ++ intr_mask.tr_rdy = regk_ser_yes; ++ ++ ++ tr_ctrl.stop = 0; ++ tr_ctrl.txd = 1; ++ } ++ REG_WR(ser, up->regi_ser, rw_tr_ctrl, tr_ctrl); ++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tr_dma_en); ++ REG_WR(ser, up->regi_ser, rw_intr_mask, intr_mask); ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++/* ++ * The output DMA channel is free - use it to send as many chars as ++ * possible. ++ */ ++ ++static void ++transmit_chars_dma(struct uart_cris_port *up) ++{ ++ struct dma_descr_data *descr, *pending_descr, *dmapos; ++ struct dma_descr_data *last_tx_descr; ++ struct circ_buf *xmit = &up->port.info->xmit; ++ unsigned int sentl = 0; ++ reg_dma_rw_ack_intr ack_intr = { .data = regk_dma_yes }; ++ reg_dma_rw_stat status; ++ reg_scope_instances regi_dmaout = up->regi_dmaout; ++ unsigned int chars_in_q; ++ unsigned int chars_to_send; ++ ++ /* Acknowledge dma data descriptor irq, if there was one. */ ++ REG_WR(dma, regi_dmaout, rw_ack_intr, ack_intr); ++ ++ /* ++ * First get the amount of bytes sent during the last DMA transfer, ++ * and update xmit accordingly. ++ */ ++ status = REG_RD(dma, regi_dmaout, rw_stat); ++ if (status.list_state == regk_dma_data_at_eol || !up->tx_started) ++ dmapos = phys_to_virt((int)up->last_tx_descr->next); ++ else ++ dmapos = phys_to_virt(REG_RD_INT(dma, regi_dmaout, rw_data)); ++ ++ pending_descr = up->first_tx_descr; ++ while (pending_descr != dmapos) { ++ sentl += pending_descr->after - pending_descr->buf; ++ pending_descr->after = pending_descr->buf = NULL; ++ pending_descr = phys_to_virt((int)pending_descr->next); ++ } ++ ++ up->first_tx_descr = pending_descr; ++ last_tx_descr = up->last_tx_descr; ++ ++ /* Update stats. */ ++ up->port.icount.tx += sentl; ++ ++ up->tx_pending_chars -= sentl; ++ ++ /* Update xmit buffer. */ ++ xmit->tail = (xmit->tail + sentl) & (UART_XMIT_SIZE - 1); ++ ++ /* ++ * Find out the largest amount of consecutive bytes we want to send ++ * now. ++ */ ++ chars_in_q = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); ++ ++ if (chars_in_q == 0) ++ /* Tell upper layers that we're now idle. */ ++ goto done; ++ ++ /* Some of those characters are actually pending output. */ ++ chars_to_send = chars_in_q - up->tx_pending_chars; ++ ++ /* ++ * Clamp the new number of pending chars to the advertised ++ * one. ++ */ ++ if (chars_to_send + up->tx_pending_chars > up->port.fifosize) ++ chars_to_send = up->port.fifosize - up->tx_pending_chars; ++ ++ /* If we don't want to send any, we're done. */ ++ if (chars_to_send == 0) ++ goto done; ++ ++ descr = phys_to_virt((int)last_tx_descr->next); ++ ++ /* ++ * We can't send anything if we could make the condition in ++ * the while-loop above (reaping finished descriptors) be met ++ * immediately before the first iteration. However, don't ++ * mistake the full state for the empty state. ++ */ ++ if ((descr == up->first_tx_descr && up->tx_pending_chars != 0) ++ || descr->next == up->first_tx_descr) ++ goto done; ++ ++ /* Set up the descriptor for output. */ ++ descr->buf = (void*)virt_to_phys(xmit->buf + xmit->tail ++ + up->tx_pending_chars); ++ descr->after = descr->buf + chars_to_send; ++ descr->eol = 1; ++ descr->out_eop = 0; ++ descr->intr = 1; ++ descr->wait = 0; ++ descr->in_eop = 0; ++ descr->md = 0; ++ /* ++ * Make sure GCC doesn't move this eol clear before the eol set ++ * above. ++ */ ++ barrier(); ++ last_tx_descr->eol = 0; ++ ++ up->last_tx_descr = descr; ++ up->tx_pending_chars += chars_to_send; ++ ++ if (!up->tx_started) { ++ up->tx_started = 1; ++ up->tr_context_descr.next = 0; ++ up->tr_context_descr.saved_data ++ = (dma_descr_data*)virt_to_phys(descr); ++ up->tr_context_descr.saved_data_buf = descr->buf; ++ DMA_START_CONTEXT(regi_dmaout, ++ virt_to_phys(&up->tr_context_descr)); ++ } else ++ DMA_CONTINUE_DATA(regi_dmaout); ++ ++ /* DMA is now running (hopefully). */ ++ ++ done: ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(&up->port); ++} ++ ++static void ++transmit_chars_no_dma(struct uart_cris_port *up) ++{ ++ int count; ++ struct circ_buf *xmit = &up->port.info->xmit; ++ ++ reg_scope_instances regi_ser = up->regi_ser; ++ reg_ser_r_stat_din rstat; ++ reg_ser_rw_ack_intr ack_intr = { .tr_rdy = regk_ser_yes }; ++ ++ if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) { ++ /* No more to send, so disable the interrupt. */ ++ reg_ser_rw_intr_mask intr_mask; ++ intr_mask = REG_RD(ser, regi_ser, rw_intr_mask); ++ intr_mask.tr_rdy = 0; ++ intr_mask.tr_empty = 0; ++ REG_WR(ser, regi_ser, rw_intr_mask, intr_mask); ++ return; ++ } ++ ++ count = ETRAX_SER_FIFO_SIZE; ++ do { ++ reg_ser_rw_dout dout = { .data = xmit->buf[xmit->tail] }; ++ REG_WR(ser, regi_ser, rw_dout, dout); ++ REG_WR(ser, regi_ser, rw_ack_intr, ack_intr); ++ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE-1); ++ up->port.icount.tx++; ++ if (xmit->head == xmit->tail) ++ break; ++ rstat = REG_RD(ser, regi_ser, r_stat_din); ++ } while ((--count > 0) && rstat.tr_rdy); ++ ++ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) ++ uart_write_wakeup(&up->port); ++} /* transmit_chars_no_dma */ ++ ++static struct etrax_recv_buffer * ++alloc_recv_buffer(unsigned int size) ++{ ++ struct etrax_recv_buffer *buffer; ++ ++ if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) ++ panic("%s: Could not allocate %d bytes buffer\n", ++ __FUNCTION__, size); ++ ++ buffer->next = NULL; ++ buffer->length = 0; ++ buffer->error = TTY_NORMAL; ++ ++ return buffer; ++} ++ ++static void ++append_recv_buffer(struct uart_cris_port *up, ++ struct etrax_recv_buffer *buffer) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ if (!up->first_recv_buffer) ++ up->first_recv_buffer = buffer; ++ else ++ up->last_recv_buffer->next = buffer; ++ ++ up->last_recv_buffer = buffer; ++ ++ up->recv_cnt += buffer->length; ++ if (up->recv_cnt > up->max_recv_cnt) ++ up->max_recv_cnt = up->recv_cnt; ++ ++ local_irq_restore(flags); ++} ++ ++static int ++add_char_and_flag(struct uart_cris_port *up, unsigned char data, ++ unsigned char flag) ++{ ++ struct etrax_recv_buffer *buffer; ++ ++ buffer = alloc_recv_buffer(4); ++ buffer->length = 1; ++ buffer->error = flag; ++ buffer->buffer[0] = data; ++ ++ append_recv_buffer(up, buffer); ++ ++ up->port.icount.rx++; ++ ++ return 1; ++} ++ ++static void ++flush_to_flip_buffer(struct uart_cris_port *up) ++{ ++ struct tty_struct *tty; ++ struct etrax_recv_buffer *buffer; ++ ++ tty = up->port.info->tty; ++ if (!up->first_recv_buffer || !tty) ++ return; ++ ++ while ((buffer = up->first_recv_buffer)) { ++ unsigned int count = (unsigned int) ++ tty_insert_flip_string(tty, buffer->buffer, ++ buffer->length); ++ ++ up->recv_cnt -= count; ++ ++ if (count == buffer->length) { ++ up->first_recv_buffer = buffer->next; ++ kfree(buffer); ++ } else { ++ buffer->length -= count; ++ memmove(buffer->buffer, buffer->buffer + count, ++ buffer->length); ++ buffer->error = TTY_NORMAL; ++ } ++ } ++ ++ if (!up->first_recv_buffer) ++ up->last_recv_buffer = NULL; ++ ++ /* This call includes a check for low-latency. */ ++ tty_flip_buffer_push(tty); ++} ++ ++static unsigned int ++handle_descr_data(struct uart_cris_port *up, struct dma_descr_data *descr, ++ unsigned int recvl) ++{ ++ struct etrax_recv_buffer *buffer ++ = phys_to_virt((unsigned long)descr->buf) - sizeof *buffer; ++ ++ if (up->recv_cnt + recvl > 65536) { ++ printk(KERN_ERR "Too much pending incoming data on %s!" ++ " Dropping %u bytes.\n", up->port.info->tty->name, ++ recvl); ++ return 0; ++ } ++ ++ buffer->length = recvl; ++ ++ append_recv_buffer(up, buffer); ++ ++ flush_to_flip_buffer(up); ++ ++ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); ++ descr->buf = (void*)virt_to_phys(buffer->buffer); ++ descr->after = descr->buf + SERIAL_DESCR_BUF_SIZE; ++ ++ return recvl; ++} ++ ++static unsigned int ++handle_all_descr_data(struct uart_cris_port *up) ++{ ++ struct dma_descr_data *descr ++ = &up->rec_descr[(up->cur_rec_descr - 1) ++ % SERIAL_RECV_DESCRIPTORS]; ++ struct dma_descr_data *prev_descr; ++ unsigned int recvl; ++ unsigned int ret = 0; ++ reg_scope_instances regi_dmain = up->regi_dmain; ++ ++ while (1) { ++ prev_descr = descr; ++ descr = &up->rec_descr[up->cur_rec_descr]; ++ ++ if (descr == phys_to_virt(REG_RD(dma, regi_dmain, rw_data))) ++ break; ++ ++ if (++up->cur_rec_descr == SERIAL_RECV_DESCRIPTORS) ++ up->cur_rec_descr = 0; ++ ++ /* Find out how many bytes were read. */ ++ recvl = descr->after - descr->buf; ++ ++ /* Update stats. */ ++ up->port.icount.rx += recvl; ++ ++ ret += handle_descr_data(up, descr, recvl); ++ descr->eol = 1; ++ /* ++ * Make sure GCC doesn't move this eol clear before the ++ * eol set above. ++ */ ++ barrier(); ++ prev_descr->eol = 0; ++ flush_dma_descr(descr,1); // Cache bug workaround ++ flush_dma_descr(prev_descr,0); // Cache bug workaround ++ } ++ ++ return ret; ++} ++ ++static void ++receive_chars_dma(struct uart_cris_port *up) ++{ ++ reg_ser_r_stat_din rstat; ++ reg_dma_rw_ack_intr ack_intr = {0}; ++ ++ /* Acknowledge both dma_descr and dma_eop irq. */ ++ ack_intr.data = 1; ++ ack_intr.in_eop = 1; ++ REG_WR(dma, up->regi_dmain, rw_ack_intr, ack_intr); ++ ++ handle_all_descr_data(up); ++ ++ /* Read the status register to detect errors. */ ++ rstat = REG_RD(ser, up->regi_ser, r_stat_din); ++ ++ if (rstat.framing_err | rstat.par_err | rstat.orun) { ++ /* ++ * If we got an error, we must reset it by reading the ++ * rs_stat_din register and put the data in buffer manually. ++ */ ++ reg_ser_rs_stat_din stat_din; ++ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din); ++ ++ if (stat_din.par_err) ++ add_char_and_flag(up, stat_din.data, TTY_PARITY); ++ else if (stat_din.orun) ++ add_char_and_flag(up, stat_din.data, TTY_OVERRUN); ++ else if (stat_din.framing_err) ++ add_char_and_flag(up, stat_din.data, TTY_FRAME); ++ } ++ ++ /* Restart the receiving DMA, in case it got stuck on an EOL. */ ++ DMA_CONTINUE_DATA(up->regi_dmain); ++} ++ ++void receive_chars_no_dma(struct uart_cris_port *up) ++{ ++ reg_ser_rs_stat_din stat_din; ++ reg_ser_r_stat_din rstat; ++ struct tty_struct *tty; ++ struct uart_icount *icount; ++ int max_count = 16; ++ char flag; ++ reg_ser_rw_ack_intr ack_intr = { 0 }; ++ ++ rstat = REG_RD(ser, up->regi_ser, r_stat_din); ++ up->last_rx_active_usec = GET_JIFFIES_USEC(); ++ up->last_rx_active = jiffies; ++ icount = &up->port.icount; ++ tty = up->port.info->tty; ++ ++ do { ++ stat_din = REG_RD(ser, up->regi_ser, rs_stat_din); ++ ++ flag = TTY_NORMAL; ++ ack_intr.dav = 1; ++ REG_WR(ser, up->regi_ser, rw_ack_intr, ack_intr); ++ icount->rx++; ++ ++ if (stat_din.framing_err | stat_din.par_err | stat_din.orun) { ++ if (stat_din.data == 0x00 && ++ stat_din.framing_err) { ++ /* Most likely a break. */ ++ flag = TTY_BREAK; ++ icount->brk++; ++ } else if (stat_din.par_err) { ++ flag = TTY_PARITY; ++ icount->parity++; ++ } else if (stat_din.orun) { ++ flag = TTY_OVERRUN; ++ icount->overrun++; ++ } else if (stat_din.framing_err) { ++ flag = TTY_FRAME; ++ icount->frame++; ++ } ++ } ++ ++ /* ++ * If this becomes important, we probably *could* handle this ++ * gracefully by keeping track of the unhandled character. ++ */ ++ if (!tty_insert_flip_char(tty, stat_din.data, flag)) ++ panic("%s: No tty buffer space", __FUNCTION__); ++ rstat = REG_RD(ser, up->regi_ser, r_stat_din); ++ } while (rstat.dav && (max_count-- > 0)); ++ spin_unlock(&up->port.lock); ++ tty_flip_buffer_push(tty); ++ spin_lock(&up->port.lock); ++} /* receive_chars_no_dma */ ++ ++/* ++ * DMA output channel interrupt handler. ++ * this interrupt is called from DMA2(ser2), DMA8(ser3), DMA6(ser0) or ++ * DMA4(ser1) when they have finished a descriptor with the intr flag set. ++ */ ++ ++static irqreturn_t ++dma_tr_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)dev_id; ++ reg_dma_r_masked_intr masked_intr; ++ reg_scope_instances regi_dmaout; ++ int handled = 0; ++ ++ spin_lock(&up->port.lock); ++ regi_dmaout = up->regi_dmaout; ++ if (!regi_dmaout) { ++ spin_unlock(&up->port.lock); ++ return IRQ_NONE; ++ } ++ ++ /* ++ * Check for dma_descr (don't need to check for dma_eop in ++ * output DMA for serial). ++ */ ++ masked_intr = REG_RD(dma, regi_dmaout, r_masked_intr); ++ ++ if (masked_intr.data) { ++ /* We can send a new dma bunch. make it so. */ ++ ++ /* ++ * Read jiffies_usec first. ++ * We want this time to be as late as possible. ++ */ ++ up->last_tx_active_usec = GET_JIFFIES_USEC(); ++ up->last_tx_active = jiffies; ++ transmit_chars_dma(up); ++ handled = 1; ++ } ++ check_modem_status(up); ++ spin_unlock(&up->port.lock); ++ return IRQ_RETVAL(handled); ++} ++ ++/* DMA input channel interrupt handler. */ ++ ++static irqreturn_t ++dma_rec_interrupt(int irq, void *dev_id, struct pt_regs * regs) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)dev_id; ++ reg_dma_r_masked_intr masked_intr; ++ reg_scope_instances regi_dmain; ++ int handled = 0; ++ ++ spin_lock(&up->port.lock); ++ regi_dmain = up->regi_dmain; ++ if (!regi_dmain) { ++ spin_unlock(&up->port.lock); ++ return IRQ_NONE; ++ } ++ ++ /* Check for both dma_eop and dma_descr for the input dma channel. */ ++ masked_intr = REG_RD(dma, regi_dmain, r_masked_intr); ++ if (masked_intr.data || masked_intr.in_eop) { ++ /* We have received something. */ ++ receive_chars_dma(up); ++ handled = 1; ++ } ++ check_modem_status(up); ++ spin_unlock(&up->port.lock); ++ return IRQ_RETVAL(handled); ++} ++ ++/* "Normal" serial port interrupt handler - both rx and tx. */ ++ ++static irqreturn_t ++ser_interrupt(int irq, void *dev_id, struct pt_regs *regs) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)dev_id; ++ reg_scope_instances regi_ser; ++ int handled = 0; ++ ++ spin_lock(&up->port.lock); ++ if (up->regi_dmain && up->regi_dmaout) { ++ spin_unlock(&up->port.lock); ++ return IRQ_NONE; ++ } ++ ++ regi_ser = up->regi_ser; ++ ++ if (regi_ser) { ++ reg_ser_r_masked_intr masked_intr; ++ masked_intr = REG_RD(ser, regi_ser, r_masked_intr); ++ /* ++ * Check what interrupts are active before taking ++ * actions. If DMA is used the interrupt shouldn't ++ * be enabled. ++ */ ++ if (masked_intr.dav) { ++ receive_chars_no_dma(up); ++ handled = 1; ++ } ++ check_modem_status(up); ++ ++ if (masked_intr.tr_rdy) { ++ transmit_chars_no_dma(up); ++ handled = 1; ++ } ++ } ++ spin_unlock(&up->port.lock); ++ return IRQ_RETVAL(handled); ++} /* ser_interrupt */ ++ ++static int start_recv_dma(struct uart_cris_port *up) ++{ ++ struct dma_descr_data *descr = up->rec_descr; ++ struct etrax_recv_buffer *buffer; ++ int i; ++ ++ /* Set up the receiving descriptors. */ ++ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { ++ buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); ++ descr[i].next = (void*)virt_to_phys(&descr[i+1]); ++ descr[i].buf = (void*)virt_to_phys(buffer->buffer); ++ descr[i].after = descr[i].buf + SERIAL_DESCR_BUF_SIZE; ++ descr[i].eol = 0; ++ descr[i].out_eop = 0; ++ descr[i].intr = 1; ++ descr[i].wait = 0; ++ descr[i].in_eop = 0; ++ descr[i].md = 0; ++ ++ } ++ ++ /* Link the last descriptor to the first. */ ++ descr[i-1].next = (void*)virt_to_phys(&descr[0]); ++ ++ /* And mark it as end of list. */ ++ descr[i-1].eol = 1; ++ ++ /* Start with the first descriptor in the list. */ ++ up->cur_rec_descr = 0; ++ up->rec_context_descr.next = 0; ++ up->rec_context_descr.saved_data ++ = (dma_descr_data *)virt_to_phys(&descr[up->cur_rec_descr]); ++ up->rec_context_descr.saved_data_buf = descr[up->cur_rec_descr].buf; ++ ++ /* Start the DMA. */ ++ DMA_START_CONTEXT(up->regi_dmain, ++ virt_to_phys(&up->rec_context_descr)); ++ ++ /* Input DMA should be running now. */ ++ return 1; ++} ++ ++ ++static void start_receive(struct uart_cris_port *up) ++{ ++ reg_scope_instances regi_dmain = up->regi_dmain; ++ if (regi_dmain) { ++ start_recv_dma(up); ++ } ++} ++ ++ ++static void start_transmitter(struct uart_cris_port *up) ++{ ++ int i; ++ reg_scope_instances regi_dmaout = up->regi_dmaout; ++ if (regi_dmaout) { ++ for (i = 0; i < SERIAL_TX_DESCRIPTORS; i++) { ++ memset(&up->tr_descr[i], 0, sizeof(up->tr_descr[i])); ++ up->tr_descr[i].eol = 1; ++ up->tr_descr[i].intr = 1; ++ up->tr_descr[i].next = (dma_descr_data *) ++ virt_to_phys(&up->tr_descr[i+1]); ++ } ++ up->tr_descr[i-1].next = (dma_descr_data *) ++ virt_to_phys(&up->tr_descr[0]); ++ up->first_tx_descr = &up->tr_descr[0]; ++ ++ /* ++ * We'll be counting up to up->last_tx_descr->next from ++ * up->first_tx_descr when starting DMA, so we should make ++ * them the same for the very first round. If instead we'd ++ * set last_tx_descr = first_tx_descr, we'd rely on ++ * accidentally working code and data as we'd take a pass over ++ * the first, unused, descriptor. ++ */ ++ up->last_tx_descr = &up->tr_descr[i-1]; ++ up->tx_started = 0; ++ up->tx_pending_chars = 0; ++ } ++} ++ ++static int serial_cris_startup(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ unsigned long flags; ++ reg_intr_vect_rw_mask intr_mask; ++ reg_ser_rw_intr_mask ser_intr_mask = {0}; ++ reg_dma_rw_intr_mask dmain_intr_mask = {0}; ++ reg_dma_rw_intr_mask dmaout_intr_mask = {0}; ++ reg_dma_rw_cfg cfg = {.en = 1}; ++ reg_scope_instances regi_dma; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); ++ ++ dmain_intr_mask.data = dmain_intr_mask.in_eop = regk_dma_yes; ++ dmaout_intr_mask.data = regk_dma_yes; ++ if (!up->regi_dmain) ++ ser_intr_mask.dav = regk_ser_yes; ++ ++ if (port->line == 0) { ++ if (request_irq(SER0_INTR_VECT, ser_interrupt, ++ IRQF_SHARED | IRQF_DISABLED, "ser0", ++ &serial_cris_ports[0])) ++ panic("irq ser0"); ++ /* Enable the ser0 irq in global config. */ ++ intr_mask.ser0 = 1; ++ /* Port ser0 can use dma6 for tx and dma7 for rx. */ ++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT ++ if (request_irq(DMA6_INTR_VECT, dma_tr_interrupt, ++ IRQF_DISABLED, "serial 0 dma tr", ++ &serial_cris_ports[0])) ++ panic("irq ser0txdma"); ++ crisv32_request_dma(6, "ser0", DMA_PANIC_ON_ERROR, 0, ++ dma_ser0); ++ /* Enable the dma6 irq in global config. */ ++ intr_mask.dma6 = 1; ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN ++ if (request_irq(DMA7_INTR_VECT, dma_rec_interrupt, ++ IRQF_DISABLED, "serial 0 dma rec", ++ &serial_cris_ports[0])) ++ panic("irq ser0rxdma"); ++ crisv32_request_dma(7, "ser0", DMA_PANIC_ON_ERROR, 0, ++ dma_ser0); ++ /* Enable the dma7 irq in global config. */ ++ intr_mask.dma7 = 1; ++#endif ++ } else if (port->line == 1) { ++ if (request_irq(SER1_INTR_VECT, ser_interrupt, ++ IRQF_SHARED | IRQF_DISABLED, "ser1", ++ &serial_cris_ports[1])) ++ panic("irq ser1"); ++ /* Enable the ser1 irq in global config. */ ++ intr_mask.ser1 = 1; ++ ++ /* Port ser1 can use dma4 for tx and dma5 for rx. */ ++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT ++ if (request_irq(DMA4_INTR_VECT, dma_tr_interrupt, ++ IRQF_DISABLED, "serial 1 dma tr", ++ &serial_cris_ports[1])) ++ panic("irq ser1txdma"); ++ crisv32_request_dma(4, "ser1", DMA_PANIC_ON_ERROR, 0, ++ dma_ser1); ++ /* Enable the dma4 irq in global config. */ ++ intr_mask.dma4 = 1; ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN ++ if (request_irq(DMA5_INTR_VECT, dma_rec_interrupt, ++ IRQF_DISABLED, "serial 1 dma rec", ++ &serial_cris_ports[1])) ++ panic("irq ser1rxdma"); ++ crisv32_request_dma(5, "ser1", DMA_PANIC_ON_ERROR, 0, ++ dma_ser1); ++ /* Enable the dma5 irq in global config. */ ++ intr_mask.dma5 = 1; ++#endif ++ } else if (port->line == 2) { ++ if (request_irq(SER2_INTR_VECT, ser_interrupt, ++ IRQF_SHARED | IRQF_DISABLED, "ser2", ++ &serial_cris_ports[2])) ++ panic("irq ser2"); ++ /* Enable the ser2 irq in global config. */ ++ intr_mask.ser2 = 1; ++ ++ /* Port ser2 can use dma2 for tx and dma3 for rx. */ ++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT ++ if (request_irq(DMA2_INTR_VECT, dma_tr_interrupt, ++ IRQF_DISABLED, "serial 2 dma tr", ++ &serial_cris_ports[2])) ++ panic("irq ser2txdma"); ++ crisv32_request_dma(2, "ser2", DMA_PANIC_ON_ERROR, 0, ++ dma_ser2); ++ /* Enable the dma2 irq in global config. */ ++ intr_mask.dma2 = 1; ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN ++ if (request_irq(DMA3_INTR_VECT, dma_rec_interrupt, ++ IRQF_DISABLED, "serial 2 dma rec", ++ &serial_cris_ports[2])) ++ panic("irq ser2rxdma"); ++ crisv32_request_dma(3, "ser2", DMA_PANIC_ON_ERROR, 0, ++ dma_ser2); ++ /* Enable the dma3 irq in global config. */ ++ intr_mask.dma3 = 1; ++#endif ++ } else if (port->line == 3) { ++ if (request_irq(SER3_INTR_VECT, ser_interrupt, ++ IRQF_SHARED | IRQF_DISABLED, "ser3", ++ &serial_cris_ports[3])) ++ panic("irq ser3" ); ++ /* Enable the ser3 irq in global config. */ ++ intr_mask.ser3 = 1; ++ ++ /* Port ser3 can use dma8 for tx and dma9 for rx. */ ++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT ++ if (request_irq(DMA8_INTR_VECT, dma_tr_interrupt, ++ IRQF_DISABLED, "serial 3 dma tr", ++ &serial_cris_ports[3])) ++ panic("irq ser3txdma"); ++ crisv32_request_dma(8, "ser3", DMA_PANIC_ON_ERROR, 0, ++ dma_ser3); ++ /* Enable the dma2 irq in global config. */ ++ intr_mask.dma8 = 1; ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN ++ if (request_irq(DMA9_INTR_VECT, dma_rec_interrupt, ++ IRQF_DISABLED, "serial 3 dma rec", ++ &serial_cris_ports[3])) ++ panic("irq ser3rxdma"); ++ crisv32_request_dma(9, "ser3", DMA_PANIC_ON_ERROR, 0, ++ dma_ser3); ++ /* Enable the dma3 irq in global config. */ ++ intr_mask.dma9 = 1; ++#endif ++ } ++ ++ /* ++ * Reset the DMA channels and make sure their interrupts are cleared. ++ */ ++ ++ regi_dma = up->regi_dmain; ++ if (regi_dma) { ++ reg_dma_rw_ack_intr ack_intr = { 0 }; ++ DMA_RESET(regi_dma); ++ /* Wait until reset cycle is complete. */ ++ DMA_WAIT_UNTIL_RESET(regi_dma); ++ REG_WR(dma, regi_dma, rw_cfg, cfg); ++ /* Make sure the irqs are cleared. */ ++ ack_intr.group = 1; ++ ack_intr.ctxt = 1; ++ ack_intr.data = 1; ++ ack_intr.in_eop = 1; ++ ack_intr.stream_cmd = 1; ++ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr); ++ } ++ regi_dma = up->regi_dmaout; ++ if (regi_dma) { ++ reg_dma_rw_ack_intr ack_intr = { 0 }; ++ DMA_RESET(regi_dma); ++ /* Wait until reset cycle is complete. */ ++ DMA_WAIT_UNTIL_RESET(regi_dma); ++ REG_WR(dma, regi_dma, rw_cfg, cfg); ++ /* Make sure the irqs are cleared. */ ++ ack_intr.group = 1; ++ ack_intr.ctxt = 1; ++ ack_intr.data = 1; ++ ack_intr.in_eop = 1; ++ ack_intr.stream_cmd = 1; ++ REG_WR(dma, regi_dma, rw_ack_intr, ack_intr); ++ } ++ ++ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); ++ REG_WR(ser, up->regi_ser, rw_intr_mask, ser_intr_mask); ++ if (up->regi_dmain) ++ REG_WR(dma, up->regi_dmain, rw_intr_mask, dmain_intr_mask); ++ if (up->regi_dmaout) ++ REG_WR(dma, up->regi_dmaout, rw_intr_mask, dmaout_intr_mask); ++ ++ start_receive(up); ++ start_transmitter(up); ++ ++ serial_cris_set_mctrl(&up->port, up->port.mctrl); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++ return 0; ++} ++ ++static void serial_cris_shutdown(struct uart_port *port) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ unsigned long flags; ++ reg_intr_vect_rw_mask intr_mask; ++ ++ spin_lock_irqsave(&up->port.lock, flags); ++ ++ intr_mask = REG_RD(intr_vect, regi_irq, rw_mask); ++ serial_cris_stop_tx(port); ++ serial_cris_stop_rx(port); ++ ++ if (port->line == 0) { ++ intr_mask.ser0 = 0; ++ free_irq(SER0_INTR_VECT, &serial_cris_ports[0]); ++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT ++ intr_mask.dma6 = 0; ++ crisv32_free_dma(6); ++ free_irq(DMA6_INTR_VECT, &serial_cris_ports[0]); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN ++ intr_mask.dma7 = 0; ++ crisv32_free_dma(7); ++ free_irq(DMA7_INTR_VECT, &serial_cris_ports[0]); ++#endif ++ } else if (port->line == 1) { ++ intr_mask.ser1 = 0; ++ free_irq(SER1_INTR_VECT, &serial_cris_ports[1]); ++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA4_OUT ++ intr_mask.dma4 = 0; ++ crisv32_free_dma(4); ++ free_irq(DMA4_INTR_VECT, &serial_cris_ports[1]); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT1_DMA5_IN ++ intr_mask.dma5 = 0; ++ crisv32_free_dma(5); ++ free_irq(DMA5_INTR_VECT, &serial_cris_ports[1]); ++#endif ++ } else if (port->line == 2) { ++ intr_mask.ser2 = 0; ++ free_irq(SER2_INTR_VECT, &serial_cris_ports[2]); ++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT ++ intr_mask.dma2 = 0; ++ crisv32_free_dma(2); ++ free_irq(DMA2_INTR_VECT, &serial_cris_ports[2]); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN ++ intr_mask.dma3 = 0; ++ crisv32_free_dma(3); ++ free_irq(DMA3_INTR_VECT, &serial_cris_ports[2]); ++#endif ++ } else if (port->line == 3) { ++ intr_mask.ser3 = 0; ++ free_irq(SER3_INTR_VECT, &serial_cris_ports[3]); ++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA8_OUT ++ intr_mask.dma8 = 0; ++ crisv32_free_dma(8); ++ free_irq(DMA8_INTR_VECT, &serial_cris_ports[3]); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN ++ intr_mask.dma9 = 0; ++ crisv32_free_dma(9); ++ free_irq(DMA9_INTR_VECT, &serial_cris_ports[3]); ++#endif ++ } ++ ++ REG_WR(intr_vect, regi_irq, rw_mask, intr_mask); ++ ++ serial_cris_set_mctrl(&up->port, up->port.mctrl); ++ ++ if (up->regi_dmain) { ++ struct etrax_recv_buffer *rb; ++ struct etrax_recv_buffer *rb_next; ++ int i; ++ struct dma_descr_data *descr; ++ ++ /* ++ * In case of DMA and receive errors, there might be pending ++ * receive buffers still linked here and not flushed upwards. ++ * Release them. ++ */ ++ for (rb = up->first_recv_buffer; rb != NULL; rb = rb_next) { ++ rb_next = rb->next; ++ kfree (rb); ++ } ++ up->first_recv_buffer = NULL; ++ up->last_recv_buffer = NULL; ++ ++ /* ++ * Also release buffers that were attached to the DMA ++ * before we shut down the hardware above. ++ */ ++ for (i = 0, descr = up->rec_descr; ++ i < SERIAL_RECV_DESCRIPTORS; ++ i++) ++ if (descr[i].buf) { ++ rb = phys_to_virt((u32) descr[i].buf) ++ - sizeof *rb; ++ kfree(rb); ++ descr[i].buf = NULL; ++ } ++ } ++ ++ spin_unlock_irqrestore(&up->port.lock, flags); ++ ++} ++ ++static void ++serial_cris_set_termios(struct uart_port *port, struct termios *termios, ++ struct termios *old) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ unsigned long flags; ++ reg_ser_rw_xoff xoff; ++ reg_ser_rw_xoff_clr xoff_clr = {0}; ++ reg_ser_rw_tr_ctrl tx_ctrl = {0}; ++ reg_ser_rw_tr_dma_en tx_dma_en = {0}; ++ reg_ser_rw_rec_ctrl rx_ctrl = {0}; ++ reg_ser_rw_tr_baud_div tx_baud_div = {0}; ++ reg_ser_rw_rec_baud_div rx_baud_div = {0}; ++ reg_ser_r_stat_din rstat; ++ int baud; ++ ++ if (old && ++ termios->c_cflag == old->c_cflag && ++ termios->c_iflag == old->c_iflag) ++ return; ++ ++ /* Start with default settings and then fill in changes. */ ++ ++ /* Tx: 8 bit, no/even parity, 1 stop bit, no cts. */ ++ tx_ctrl.base_freq = regk_ser_f29_493; ++ tx_ctrl.en = 0; ++ tx_ctrl.stop = 0; ++#ifdef CONFIG_ETRAX_RS485 ++ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) { ++ tx_ctrl.auto_rts = regk_ser_yes; ++ } else ++#endif ++ tx_ctrl.auto_rts = regk_ser_no; ++ tx_ctrl.txd = 1; ++ tx_ctrl.auto_cts = 0; ++ /* Rx: 8 bit, no/even parity. */ ++ if (up->regi_dmain) { ++ rx_ctrl.dma_mode = 1; ++ rx_ctrl.auto_eop = 1; ++ } ++ rx_ctrl.dma_err = regk_ser_stop; ++ rx_ctrl.sampling = regk_ser_majority; ++ rx_ctrl.timeout = 1; ++ ++#ifdef CONFIG_ETRAX_RS485 ++ if (up->rs485.enabled && (up->port_type != TYPE_485FD)) { ++# ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER ++ rx_ctrl.half_duplex = regk_ser_yes; ++# endif ++ rx_ctrl.rts_n = up->rs485.rts_after_sent ? ++ regk_ser_active : regk_ser_inactive; ++ } else if (up->port_type == TYPE_485FD) { ++ rx_ctrl.rts_n = regk_ser_active; ++ } else ++#endif ++ rx_ctrl.rts_n = regk_ser_inactive; ++ ++ /* Common for tx and rx: 8N1. */ ++ tx_ctrl.data_bits = regk_ser_bits8; ++ rx_ctrl.data_bits = regk_ser_bits8; ++ tx_ctrl.par = regk_ser_even; ++ rx_ctrl.par = regk_ser_even; ++ tx_ctrl.par_en = regk_ser_no; ++ rx_ctrl.par_en = regk_ser_no; ++ ++ tx_ctrl.stop_bits = regk_ser_bits1; ++ ++ ++ /* Change baud-rate and write it to the hardware. */ ++ ++ /* baud_clock = base_freq / (divisor*8) ++ * divisor = base_freq / (baud_clock * 8) ++ * base_freq is either: ++ * off, ext, 29.493MHz, 32.000 MHz, 32.768 MHz or 100 MHz ++ * 20.493MHz is used for standard baudrates ++ */ ++ ++ /* ++ * For the console port we keep the original baudrate here. Not very ++ * beautiful. ++ */ ++ if ((port != console_port) || old) ++ baud = uart_get_baud_rate(port, termios, old, 0, ++ port->uartclk / 8); ++ else ++ baud = console_baud; ++ ++ tx_baud_div.div = 29493000 / (8 * baud); ++ /* Rx uses same as tx. */ ++ rx_baud_div.div = tx_baud_div.div; ++ rx_ctrl.base_freq = tx_ctrl.base_freq; ++ ++ if ((termios->c_cflag & CSIZE) == CS7) { ++ /* Set 7 bit mode. */ ++ tx_ctrl.data_bits = regk_ser_bits7; ++ rx_ctrl.data_bits = regk_ser_bits7; ++ } ++ ++ if (termios->c_cflag & CSTOPB) { ++ /* Set 2 stop bit mode. */ ++ tx_ctrl.stop_bits = regk_ser_bits2; ++ } ++ ++ if (termios->c_cflag & PARENB) { ++ /* Enable parity. */ ++ tx_ctrl.par_en = regk_ser_yes; ++ rx_ctrl.par_en = regk_ser_yes; ++ } ++ ++ if (termios->c_cflag & CMSPAR) { ++ if (termios->c_cflag & PARODD) { ++ /* Set mark parity if PARODD and CMSPAR. */ ++ tx_ctrl.par = regk_ser_mark; ++ rx_ctrl.par = regk_ser_mark; ++ } else { ++ tx_ctrl.par = regk_ser_space; ++ rx_ctrl.par = regk_ser_space; ++ } ++ } else { ++ if (termios->c_cflag & PARODD) { ++ /* Set odd parity. */ ++ tx_ctrl.par = regk_ser_odd; ++ rx_ctrl.par = regk_ser_odd; ++ } ++ } ++ ++ if (termios->c_cflag & CRTSCTS) { ++ /* Enable automatic CTS handling. */ ++ tx_ctrl.auto_cts = regk_ser_yes; ++ } ++ ++ /* Make sure the tx and rx are enabled. */ ++ tx_ctrl.en = regk_ser_yes; ++ rx_ctrl.en = regk_ser_yes; ++ ++ /* ++ * Wait for tr_idle in case a character is being output, so it won't ++ * be damaged by the changes we do below. It seems the termios ++ * changes "sometimes" (we can't see e.g. a tcsetattr TCSANOW ++ * parameter here) should take place no matter what state. However, ++ * in case we should wait, we may have a non-empty transmitter state ++ * as we tell the upper layers that we're all done when we've passed ++ * characters to the hardware, but we don't wait for them being ++ * actually shifted out. ++ */ ++ spin_lock_irqsave(&port->lock, flags); ++ ++ /* ++ * None of our interrupts re-enable DMA, so it's thankfully ok to ++ * disable it once, outside the loop. ++ */ ++ tx_dma_en.en = 0; ++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); ++ do { ++ /* ++ * Make sure we have integrity between the read r_stat status ++ * and us writing the registers below, but don't busy-wait ++ * with interrupts off. We need to keep the port lock though ++ * (if we go SMP), so nobody else writes characters. ++ */ ++ local_irq_restore(flags); ++ local_irq_save(flags); ++ rstat = REG_RD(ser, up->regi_ser, r_stat_din); ++ } while (!rstat.tr_idle); ++ ++ /* Actually write the control regs (if modified) to the hardware. */ ++ ++ uart_update_timeout(port, termios->c_cflag, port->uartclk/8); ++ MODIFY_REG(up->regi_ser, rw_rec_baud_div, rx_baud_div); ++ MODIFY_REG(up->regi_ser, rw_rec_ctrl, rx_ctrl); ++ ++ MODIFY_REG(up->regi_ser, rw_tr_baud_div, tx_baud_div); ++ MODIFY_REG(up->regi_ser, rw_tr_ctrl, tx_ctrl); ++ ++ tx_dma_en.en = up->regi_dmaout != 0; ++ REG_WR(ser, up->regi_ser, rw_tr_dma_en, tx_dma_en); ++ ++ xoff = REG_RD(ser, up->regi_ser, rw_xoff); ++ ++ if (up->port.info && (up->port.info->tty->termios->c_iflag & IXON)) { ++ xoff.chr = STOP_CHAR(up->port.info->tty); ++ xoff.automatic = regk_ser_yes; ++ } else ++ xoff.automatic = regk_ser_no; ++ ++ MODIFY_REG(up->regi_ser, rw_xoff, xoff); ++ ++ /* ++ * Make sure we don't start in an automatically shut-off state due to ++ * a previous early exit. ++ */ ++ xoff_clr.clr = 1; ++ REG_WR(ser, up->regi_ser, rw_xoff_clr, xoff_clr); ++ ++ serial_cris_set_mctrl(&up->port, up->port.mctrl); ++ spin_unlock_irqrestore(&up->port.lock, flags); ++} ++ ++static const char * ++serial_cris_type(struct uart_port *port) ++{ ++ return "CRISv32"; ++} ++ ++static void serial_cris_release_port(struct uart_port *port) ++{ ++} ++ ++static int serial_cris_request_port(struct uart_port *port) ++{ ++ return 0; ++} ++ ++static void serial_cris_config_port(struct uart_port *port, int flags) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ up->port.type = PORT_CRIS; ++} ++ ++#if defined(CONFIG_ETRAX_RS485) ++ ++static void cris_set_rs485_mode(struct uart_cris_port* up) { ++ reg_ser_rw_tr_ctrl tr_ctrl; ++ reg_ser_rw_rec_ctrl rec_ctrl; ++ reg_scope_instances regi_ser = up->regi_ser; ++ ++ if (up->port_type == TYPE_485FD) ++ /* We do not want to change anything if we are in 485FD mode */ ++ return; ++ ++ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl); ++ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl); ++ ++ /* Set port in RS-485 mode */ ++ if (up->rs485.enabled) { ++ tr_ctrl.auto_rts = regk_ser_yes; ++ rec_ctrl.rts_n = up->rs485.rts_after_sent ? ++ regk_ser_active : regk_ser_inactive; ++#ifdef CONFIG_ETRAX_RS485_DISABLE_RECEIVER ++ rec_ctrl.half_duplex = regk_ser_yes; ++#endif ++ } ++ /* Set port to RS-232 mode */ ++ else { ++ rec_ctrl.rts_n = regk_ser_inactive; ++ tr_ctrl.auto_rts = regk_ser_no; ++ rec_ctrl.half_duplex = regk_ser_no; ++ } ++ ++ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl); ++ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl); ++} ++ ++/* Enable/disable RS-485 mode on selected port. */ ++static int ++cris_enable_rs485(struct uart_cris_port* up, struct rs485_control *r) ++{ ++ if (up->port_type == TYPE_485FD) ++ /* Port in 485FD mode can not chage mode */ ++ goto out; ++ ++ up->rs485.enabled = 0x1 & r->enabled; ++ up->rs485.rts_on_send = 0x01 & r->rts_on_send; ++ up->rs485.rts_after_sent = 0x01 & r->rts_after_sent; ++ up->rs485.delay_rts_before_send = r->delay_rts_before_send; ++ ++ cris_set_rs485_mode(up); ++ out: ++ return 0; ++} ++ ++ ++/* Enable RS485 mode on port and send the data. Port will stay ++ * in 485 mode after the data has been sent. ++ */ ++static int ++cris_write_rs485(struct uart_cris_port* up, const unsigned char *buf, ++ int count) ++{ ++ up->rs485.enabled = 1; ++ ++ /* Set the port in RS485 mode */ ++ cris_set_rs485_mode(up); ++ ++ /* Send the data */ ++ count = serial_cris_driver.tty_driver->write(up->port.info->tty, buf, count); ++ ++ return count; ++} ++ ++#endif /* CONFIG_ETRAX_RS485 */ ++ ++static int serial_cris_ioctl(struct uart_port *port, unsigned int cmd, ++ unsigned long arg) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ ++ switch (cmd) { ++#if defined(CONFIG_ETRAX_RS485) ++ case TIOCSERSETRS485: { ++ struct rs485_control rs485ctrl; ++ if (copy_from_user(&rs485ctrl, (struct rs485_control*) arg, ++ sizeof(rs485ctrl))) ++ return -EFAULT; ++ ++ return cris_enable_rs485(up, &rs485ctrl); ++ } ++ ++ case TIOCSERWRRS485: { ++ struct rs485_write rs485wr; ++ if (copy_from_user(&rs485wr, (struct rs485_write*)arg, ++ sizeof(rs485wr))) ++ return -EFAULT; ++ ++ return cris_write_rs485(up, rs485wr.outc, rs485wr.outc_size); ++ } ++#endif ++ default: ++ return -ENOIOCTLCMD; ++ } ++ ++ return 0; ++} ++ ++static const struct uart_ops serial_cris_pops = { ++ .tx_empty = serial_cris_tx_empty, ++ .set_mctrl = serial_cris_set_mctrl, ++ .get_mctrl = serial_cris_get_mctrl, ++ .stop_tx = serial_cris_stop_tx, ++ .start_tx = serial_cris_start_tx, ++ .send_xchar = serial_cris_send_xchar, ++ .stop_rx = serial_cris_stop_rx, ++ .enable_ms = serial_cris_enable_ms, ++ .break_ctl = serial_cris_break_ctl, ++ .startup = serial_cris_startup, ++ .shutdown = serial_cris_shutdown, ++ .set_termios = serial_cris_set_termios, ++ .type = serial_cris_type, ++ .release_port = serial_cris_release_port, ++ .request_port = serial_cris_request_port, ++ .config_port = serial_cris_config_port, ++ .ioctl = serial_cris_ioctl, ++}; ++ ++/* ++ * It's too easy to break CONFIG_ETRAX_DEBUG_PORT_NULL and the ++ * no-config choices by adding and moving code to before a necessary ++ * early exit in all functions for the special case of ++ * up->regi_ser == 0. This collection of dummy functions lets us ++ * avoid that. Maybe there should be a generic table of dummy serial ++ * functions? ++ */ ++ ++static unsigned int serial_cris_tx_empty_dummy(struct uart_port *port) ++{ ++ return TIOCSER_TEMT; ++} ++ ++static void serial_cris_set_mctrl_dummy(struct uart_port *port, ++ unsigned int mctrl) ++{ ++} ++ ++static unsigned int serial_cris_get_mctrl_dummy(struct uart_port *port) ++{ ++ return 0; ++} ++ ++static void serial_cris_stop_tx_dummy(struct uart_port *port) ++{ ++} ++ ++static void serial_cris_start_tx_dummy(struct uart_port *port) ++{ ++ /* Discard outbound characters. */ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ struct circ_buf *xmit = &up->port.info->xmit; ++ xmit->tail = xmit->head; ++ uart_write_wakeup(port); ++} ++ ++#define serial_cris_stop_rx_dummy serial_cris_stop_tx_dummy ++ ++#define serial_cris_enable_ms_dummy serial_cris_stop_tx_dummy ++ ++static void serial_cris_break_ctl_dummy(struct uart_port *port, ++ int break_state) ++{ ++} ++ ++static int serial_cris_startup_dummy(struct uart_port *port) ++{ ++ return 0; ++} ++ ++#define serial_cris_shutdown_dummy serial_cris_stop_tx_dummy ++ ++static void ++serial_cris_set_termios_dummy(struct uart_port *port, struct termios *termios, ++ struct termios *old) ++{ ++} ++ ++#define serial_cris_release_port_dummy serial_cris_stop_tx_dummy ++#define serial_cris_request_port_dummy serial_cris_startup_dummy ++ ++static const struct uart_ops serial_cris_dummy_pops = { ++ /* ++ * We *could* save one or two of those with different ++ * signature by casting and knowledge of the ABI, but it's ++ * just not worth the maintenance headache. ++ * For the ones we don't define here, the default (usually meaning ++ * "unimplemented") makes sense. ++ */ ++ .tx_empty = serial_cris_tx_empty_dummy, ++ .set_mctrl = serial_cris_set_mctrl_dummy, ++ .get_mctrl = serial_cris_get_mctrl_dummy, ++ .stop_tx = serial_cris_stop_tx_dummy, ++ .start_tx = serial_cris_start_tx_dummy, ++ .stop_rx = serial_cris_stop_rx_dummy, ++ .enable_ms = serial_cris_enable_ms_dummy, ++ .break_ctl = serial_cris_break_ctl_dummy, ++ .startup = serial_cris_startup_dummy, ++ .shutdown = serial_cris_shutdown_dummy, ++ .set_termios = serial_cris_set_termios_dummy, ++ ++ /* This one we keep the same. */ ++ .type = serial_cris_type, ++ ++ .release_port = serial_cris_release_port_dummy, ++ .request_port = serial_cris_request_port_dummy, ++ ++ /* ++ * This one we keep the same too, as long as it doesn't do ++ * anything else but to set the type. ++ */ ++ .config_port = serial_cris_config_port, ++}; ++ ++static void cris_serial_port_init(struct uart_port *port, int line) ++{ ++ struct uart_cris_port *up = (struct uart_cris_port *)port; ++ static int first = 1; ++ ++ if (up->initialized) ++ return; ++ up->initialized = 1; ++ port->line = line; ++ spin_lock_init(&port->lock); ++ port->ops = ++ up->regi_ser == 0 ? &serial_cris_dummy_pops : ++ &serial_cris_pops; ++ port->irq = up->irq; ++ port->iobase = up->regi_ser ? up->regi_ser : 1; ++ port->uartclk = 29493000; ++ ++ /* ++ * We can't fit any more than 255 here (unsigned char), though ++ * actually UART_XMIT_SIZE characters could be pending output (if it ++ * wasn't for the single test in transmit_chars_dma). At time of this ++ * writing, the definition of "fifosize" is here the amount of ++ * characters that can be pending output after a start_tx call until ++ * tx_empty returns 1: see serial_core.c:uart_wait_until_sent. This ++ * matters for timeout calculations unfortunately, but keeping larger ++ * amounts at the DMA wouldn't win much so let's just play nice. ++ */ ++ port->fifosize = 255; ++ port->flags = UPF_BOOT_AUTOCONF; ++ ++#ifdef CONFIG_ETRAX_RS485 ++ /* Set sane defaults. */ ++ up->rs485.rts_on_send = 0; ++ up->rs485.rts_after_sent = 1; ++ up->rs485.delay_rts_before_send = 0; ++ if (up->port_type > TYPE_232) ++ up->rs485.enabled = 1; ++ else ++ up->rs485.enabled = 0; ++#endif ++ ++ if (first) { ++ first = 0; ++#ifdef CONFIG_ETRAX_SERIAL_PORT0 ++ SETUP_PINS(0); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT1 ++ SETUP_PINS(1); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT2 ++ SETUP_PINS(2); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT3 ++ SETUP_PINS(3); ++#endif ++ } ++} ++ ++static int __init serial_cris_init(void) ++{ ++ int ret, i; ++ reg_ser_rw_rec_ctrl rec_ctrl; ++ printk(KERN_INFO "Serial: CRISv32 driver $Revision: 1.78 $ "); ++ ++ ret = uart_register_driver(&serial_cris_driver); ++ if (ret) ++ goto out; ++ ++ for (i = 0; i < UART_NR; i++) { ++ if (serial_cris_ports[i].used) { ++#ifdef CONFIG_ETRAX_RS485 ++ /* Make sure that the RTS pin stays low when allocating ++ * pins for a port in 485 mode. ++ */ ++ if (serial_cris_ports[i].port_type > TYPE_232) { ++ rec_ctrl = REG_RD(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl); ++ rec_ctrl.rts_n = regk_ser_active; ++ REG_WR(ser, serial_cris_ports[i].regi_ser, rw_rec_ctrl, rec_ctrl); ++ } ++#endif ++ switch (serial_cris_ports[i].regi_ser) { ++ case regi_ser1: ++ if (crisv32_pinmux_alloc_fixed(pinmux_ser1)) { ++ printk("Failed to allocate pins for ser1, disable port\n"); ++ serial_cris_ports[i].used = 0; ++ continue; ++ } ++ break; ++ case regi_ser2: ++ if (crisv32_pinmux_alloc_fixed(pinmux_ser2)) { ++ printk("Failed to allocate pins for ser2, disable port\n"); ++ serial_cris_ports[i].used = 0; ++ continue; ++ } ++ break; ++ case regi_ser3: ++ if (crisv32_pinmux_alloc_fixed(pinmux_ser3)) { ++ printk("Failed to allocate pins for ser3, disable port\n"); ++ serial_cris_ports[i].used = 0; ++ continue; ++ } ++ break; ++ } ++ ++ struct uart_port *port = &serial_cris_ports[i].port; ++ cris_console.index = i; ++ cris_serial_port_init(port, i); ++ uart_add_one_port(&serial_cris_driver, port); ++ } ++ } ++ ++out: ++ return ret; ++} ++ ++static void __exit serial_cris_exit(void) ++{ ++ int i; ++ for (i = 0; i < UART_NR; i++) ++ if (serial_cris_ports[i].used) { ++ switch (serial_cris_ports[i].regi_ser) { ++ case regi_ser1: ++ crisv32_pinmux_dealloc_fixed(pinmux_ser1); ++ break; ++ case regi_ser2: ++ crisv32_pinmux_dealloc_fixed(pinmux_ser2); ++ break; ++ case regi_ser3: ++ crisv32_pinmux_dealloc_fixed(pinmux_ser3); ++ break; ++ } ++ uart_remove_one_port(&serial_cris_driver, ++ &serial_cris_ports[i].port); ++ } ++ uart_unregister_driver(&serial_cris_driver); ++} ++ ++module_init(serial_cris_init); ++module_exit(serial_cris_exit); +--- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100 +@@ -1,219 +1,51 @@ + /* +- * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD) + * +- * Copyright (c) 2002, 2003 Axis Communications AB. ++ * ETRAX 100LX USB Host Controller Driver ++ * ++ * Copyright (C) 2005, 2006 Axis Communications AB ++ * ++ * Author: Konrad Eriksson <konrad.eriksson@axis.se> ++ * + */ + ++#include <linux/module.h> + #include <linux/kernel.h> +-#include <linux/delay.h> +-#include <linux/ioport.h> +-#include <linux/sched.h> +-#include <linux/slab.h> +-#include <linux/errno.h> +-#include <linux/unistd.h> +-#include <linux/interrupt.h> + #include <linux/init.h> +-#include <linux/list.h> ++#include <linux/moduleparam.h> + #include <linux/spinlock.h> ++#include <linux/usb.h> ++#include <linux/platform_device.h> + +-#include <asm/uaccess.h> + #include <asm/io.h> + #include <asm/irq.h> +-#include <asm/dma.h> +-#include <asm/system.h> +-#include <asm/arch/svinto.h> ++#include <asm/arch/dma.h> ++#include <asm/arch/io_interface_mux.h> + +-#include <linux/usb.h> +-/* Ugly include because we don't live with the other host drivers. */ +-#include <../drivers/usb/core/hcd.h> +-#include <../drivers/usb/core/usb.h> +- +-#include "hc_crisv10.h" ++#include "../core/hcd.h" ++#include "../core/hub.h" ++#include "hc-crisv10.h" ++#include "hc-cris-dbg.h" ++ ++ ++/***************************************************************************/ ++/***************************************************************************/ ++/* Host Controller settings */ ++/***************************************************************************/ ++/***************************************************************************/ ++ ++#define VERSION "1.00" ++#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB" ++#define DESCRIPTION "ETRAX 100LX USB Host Controller" + + #define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR + #define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR + #define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR + +-static const char *usb_hcd_version = "$Revision: 1.2 $"; +- +-#undef KERN_DEBUG +-#define KERN_DEBUG "" +- +- +-#undef USB_DEBUG_RH +-#undef USB_DEBUG_EPID +-#undef USB_DEBUG_SB +-#undef USB_DEBUG_DESC +-#undef USB_DEBUG_URB +-#undef USB_DEBUG_TRACE +-#undef USB_DEBUG_BULK +-#undef USB_DEBUG_CTRL +-#undef USB_DEBUG_INTR +-#undef USB_DEBUG_ISOC +- +-#ifdef USB_DEBUG_RH +-#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg) +-#else +-#define dbg_rh(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_EPID +-#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg) +-#else +-#define dbg_epid(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_SB +-#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg) +-#else +-#define dbg_sb(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_CTRL +-#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg) +-#else +-#define dbg_ctrl(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_BULK +-#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg) +-#else +-#define dbg_bulk(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_INTR +-#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg) +-#else +-#define dbg_intr(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_ISOC +-#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg) +-#else +-#define dbg_isoc(format, arg...) do {} while (0) +-#endif +- +-#ifdef USB_DEBUG_TRACE +-#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) +-#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) +-#else +-#define DBFENTER do {} while (0) +-#define DBFEXIT do {} while (0) +-#endif +- +-#define usb_pipeslow(pipe) (((pipe) >> 26) & 1) +- +-/*------------------------------------------------------------------- +- Virtual Root Hub +- -------------------------------------------------------------------*/ +- +-static __u8 root_hub_dev_des[] = +-{ +- 0x12, /* __u8 bLength; */ +- 0x01, /* __u8 bDescriptorType; Device */ +- 0x00, /* __le16 bcdUSB; v1.0 */ +- 0x01, +- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ +- 0x00, /* __u8 bDeviceSubClass; */ +- 0x00, /* __u8 bDeviceProtocol; */ +- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ +- 0x00, /* __le16 idVendor; */ +- 0x00, +- 0x00, /* __le16 idProduct; */ +- 0x00, +- 0x00, /* __le16 bcdDevice; */ +- 0x00, +- 0x00, /* __u8 iManufacturer; */ +- 0x02, /* __u8 iProduct; */ +- 0x01, /* __u8 iSerialNumber; */ +- 0x01 /* __u8 bNumConfigurations; */ +-}; +- +-/* Configuration descriptor */ +-static __u8 root_hub_config_des[] = +-{ +- 0x09, /* __u8 bLength; */ +- 0x02, /* __u8 bDescriptorType; Configuration */ +- 0x19, /* __le16 wTotalLength; */ +- 0x00, +- 0x01, /* __u8 bNumInterfaces; */ +- 0x01, /* __u8 bConfigurationValue; */ +- 0x00, /* __u8 iConfiguration; */ +- 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */ +- 0x00, /* __u8 MaxPower; */ +- +- /* interface */ +- 0x09, /* __u8 if_bLength; */ +- 0x04, /* __u8 if_bDescriptorType; Interface */ +- 0x00, /* __u8 if_bInterfaceNumber; */ +- 0x00, /* __u8 if_bAlternateSetting; */ +- 0x01, /* __u8 if_bNumEndpoints; */ +- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ +- 0x00, /* __u8 if_bInterfaceSubClass; */ +- 0x00, /* __u8 if_bInterfaceProtocol; */ +- 0x00, /* __u8 if_iInterface; */ +- +- /* endpoint */ +- 0x07, /* __u8 ep_bLength; */ +- 0x05, /* __u8 ep_bDescriptorType; Endpoint */ +- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ +- 0x03, /* __u8 ep_bmAttributes; Interrupt */ +- 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */ +- 0x00, +- 0xff /* __u8 ep_bInterval; 255 ms */ +-}; +- +-static __u8 root_hub_hub_des[] = +-{ +- 0x09, /* __u8 bLength; */ +- 0x29, /* __u8 bDescriptorType; Hub-descriptor */ +- 0x02, /* __u8 bNbrPorts; */ +- 0x00, /* __u16 wHubCharacteristics; */ +- 0x00, +- 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ +- 0x00, /* __u8 bHubContrCurrent; 0 mA */ +- 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ +- 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ +-}; +- +-static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0); +-static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0); +- +-/* We want the start timer to expire before the eot timer, because the former might start +- traffic, thus making it unnecessary for the latter to time out. */ +-#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */ +-#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */ +- +-#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break +-#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ +-{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} +- +-#define SLAB_FLAG (in_interrupt() ? SLAB_ATOMIC : SLAB_KERNEL) +-#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) +- +-/* Most helpful debugging aid */ +-#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) +- +-/* Alternative assert define which stops after a failed assert. */ +-/* +-#define assert(expr) \ +-{ \ +- if (!(expr)) { \ +- err("assert failed at line %d",__LINE__); \ +- while (1); \ +- } \ +-} +-*/ +- ++/* Number of physical ports in Etrax 100LX */ ++#define USB_ROOT_HUB_PORTS 2 + +-/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically? +- To adjust it dynamically we would have to get an interrupt when we reach the end +- of the rx descriptor list, or when we get close to the end, and then allocate more +- descriptors. */ +- +-#define NBR_OF_RX_DESC 512 +-#define RX_DESC_BUF_SIZE 1024 +-#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) ++const char hc_name[] = "hc-crisv10"; ++const char product_desc[] = DESCRIPTION; + + /* The number of epids is, among other things, used for pre-allocating + ctrl, bulk and isoc EP descriptors (one for each epid). +@@ -221,4332 +53,4632 @@ + #define NBR_OF_EPIDS 32 + + /* Support interrupt traffic intervals up to 128 ms. */ +-#define MAX_INTR_INTERVAL 128 ++#define MAX_INTR_INTERVAL 128 + +-/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table +- must be "invalid". By this we mean that we shouldn't care about epid attentions +- for this epid, or at least handle them differently from epid attentions for "valid" +- epids. This define determines which one to use (don't change it). */ +-#define INVALID_EPID 31 ++/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP ++ table must be "invalid". By this we mean that we shouldn't care about epid ++ attentions for this epid, or at least handle them differently from epid ++ attentions for "valid" epids. This define determines which one to use ++ (don't change it). */ ++#define INVALID_EPID 31 + /* A special epid for the bulk dummys. */ +-#define DUMMY_EPID 30 +- +-/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */ +-static __u32 epid_usage_bitmask; +- +-/* A bitfield to keep information on in/out traffic is needed to uniquely identify +- an endpoint on a device, since the most significant bit which indicates traffic +- direction is lacking in the ep_id field (ETRAX epids can handle both in and +- out traffic on endpoints that are otherwise identical). The USB framework, however, +- relies on them to be handled separately. For example, bulk IN and OUT urbs cannot +- be queued in the same list, since they would block each other. */ +-static __u32 epid_out_traffic; +- +-/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. +- Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */ +-static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); +-static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); +- +-/* Pointers into RxDescList. */ +-static volatile USB_IN_Desc_t *myNextRxDesc; +-static volatile USB_IN_Desc_t *myLastRxDesc; +-static volatile USB_IN_Desc_t *myPrevRxDesc; +- +-/* EP descriptors must be 32-bit aligned. */ +-static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); +-static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); +-/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set, +- causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which +- gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the +- EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors +- in each frame. */ +-static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); +- +-static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); +-static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4))); +- +-static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); +-static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4))); +- +-/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting +- this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0 +- results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point +- it to this buffer. */ +-static int zout_buffer[4] __attribute__ ((aligned (4))); ++#define DUMMY_EPID 30 + +-/* Cache for allocating new EP and SB descriptors. */ +-static kmem_cache_t *usb_desc_cache; ++/* Module settings */ + +-/* Cache for the registers allocated in the top half. */ +-static kmem_cache_t *top_half_reg_cache; ++MODULE_DESCRIPTION(DESCRIPTION); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>"); + +-/* Cache for the data allocated in the isoc descr top half. */ +-static kmem_cache_t *isoc_compl_cache; + +-static struct usb_bus *etrax_usb_bus; ++/* Module parameters */ + +-/* This is a circular (double-linked) list of the active urbs for each epid. +- The head is never removed, and new urbs are linked onto the list as +- urb_entry_t elements. Don't reference urb_list directly; use the wrapper +- functions instead. Note that working with these lists might require spinlock +- protection. */ +-static struct list_head urb_list[NBR_OF_EPIDS]; ++/* 0 = No ports enabled ++ 1 = Only port 1 enabled (on board ethernet on devboard) ++ 2 = Only port 2 enabled (external connector on devboard) ++ 3 = Both ports enabled ++*/ ++static unsigned int ports = 3; ++module_param(ports, uint, S_IRUGO); ++MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use"); + +-/* Read about the need and usage of this lock in submit_ctrl_urb. */ +-static spinlock_t urb_list_lock; + +-/* Used when unlinking asynchronously. */ +-static struct list_head urb_unlink_list; ++/***************************************************************************/ ++/***************************************************************************/ ++/* Shared global variables for this module */ ++/***************************************************************************/ ++/***************************************************************************/ + +-/* for returning string descriptors in UTF-16LE */ +-static int ascii2utf (char *ascii, __u8 *utf, int utfmax) +-{ +- int retval; ++/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */ ++static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); + +- for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) { +- *utf++ = *ascii++ & 0x7f; +- *utf++ = 0; +- } +- return retval; +-} ++static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); + +-static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) +-{ +- char buf [30]; ++/* EP descriptor lists for period transfers. Must be 32-bit aligned. */ ++static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); ++static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4))); + +- // assert (len > (2 * (sizeof (buf) + 1))); +- // assert (strlen (type) <= 8); ++static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); ++static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4))); + +- // language ids +- if (id == 0) { +- *data++ = 4; *data++ = 3; /* 4 bytes data */ +- *data++ = 0; *data++ = 0; /* some language id */ +- return 4; +- +- // serial number +- } else if (id == 1) { +- sprintf (buf, "%x", serial); +- +- // product description +- } else if (id == 2) { +- sprintf (buf, "USB %s Root Hub", type); +- +- // id 3 == vendor description +- +- // unsupported IDs --> "stall" +- } else +- return 0; +- +- data [0] = 2 + ascii2utf (buf, data + 2, len - 2); +- data [1] = 3; +- return data [0]; +-} ++static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); + +-/* Wrappers around the list functions (include/linux/list.h). */ ++/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set, ++ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which ++ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the ++ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors ++ in each frame. */ ++static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); + +-static inline int urb_list_empty(int epid) ++/* List of URB pointers, where each points to the active URB for a epid. ++ For Bulk, Ctrl and Intr this means which URB that currently is added to ++ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as ++ URB has completed is the queue examined and the first URB in queue is ++ removed and moved to the activeUrbList while its state change to STARTED and ++ its transfer(s) gets added to DMA list (exception Isoc where URBs enter ++ state STARTED directly and added transfers added to DMA lists). */ ++static struct urb *activeUrbList[NBR_OF_EPIDS]; ++ ++/* Additional software state info for each epid */ ++static struct etrax_epid epid_state[NBR_OF_EPIDS]; ++ ++/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops ++ even if there is new data waiting to be processed */ ++static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); ++static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); ++ ++/* We want the start timer to expire before the eot timer, because the former ++ might start traffic, thus making it unnecessary for the latter to time ++ out. */ ++#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */ ++#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */ ++ ++/* Delay before a URB completion happen when it's scheduled to be delayed */ ++#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */ ++ ++/* Simplifying macros for checking software state info of a epid */ ++/* ----------------------------------------------------------------------- */ ++#define epid_inuse(epid) epid_state[epid].inuse ++#define epid_out_traffic(epid) epid_state[epid].out_traffic ++#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0) ++#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0) ++ ++ ++/***************************************************************************/ ++/***************************************************************************/ ++/* DEBUG FUNCTIONS */ ++/***************************************************************************/ ++/***************************************************************************/ ++/* Note that these functions are always available in their "__" variants, ++ for use in error situations. The "__" missing variants are controlled by ++ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */ ++static void __dump_urb(struct urb* purb) + { +- return list_empty(&urb_list[epid]); ++ struct crisv10_urb_priv *urb_priv = purb->hcpriv; ++ int urb_num = -1; ++ if(urb_priv) { ++ urb_num = urb_priv->urb_num; ++ } ++ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num); ++ printk("dev :0x%08lx\n", (unsigned long)purb->dev); ++ printk("pipe :0x%08x\n", purb->pipe); ++ printk("status :%d\n", purb->status); ++ printk("transfer_flags :0x%08x\n", purb->transfer_flags); ++ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); ++ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); ++ printk("actual_length :%d\n", purb->actual_length); ++ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); ++ printk("start_frame :%d\n", purb->start_frame); ++ printk("number_of_packets :%d\n", purb->number_of_packets); ++ printk("interval :%d\n", purb->interval); ++ printk("error_count :%d\n", purb->error_count); ++ printk("context :0x%08lx\n", (unsigned long)purb->context); ++ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); ++} ++ ++static void __dump_in_desc(volatile struct USB_IN_Desc *in) ++{ ++ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); ++ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); ++ printk(" command : 0x%04x\n", in->command); ++ printk(" next : 0x%08lx\n", in->next); ++ printk(" buf : 0x%08lx\n", in->buf); ++ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); ++ printk(" status : 0x%04x\n\n", in->status); ++} ++ ++static void __dump_sb_desc(volatile struct USB_SB_Desc *sb) ++{ ++ char tt = (sb->command & 0x30) >> 4; ++ char *tt_string; ++ ++ switch (tt) { ++ case 0: ++ tt_string = "zout"; ++ break; ++ case 1: ++ tt_string = "in"; ++ break; ++ case 2: ++ tt_string = "out"; ++ break; ++ case 3: ++ tt_string = "setup"; ++ break; ++ default: ++ tt_string = "unknown (weird)"; ++ } ++ ++ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb); ++ printk(" command:0x%04x (", sb->command); ++ printk("rem:%d ", (sb->command & 0x3f00) >> 8); ++ printk("full:%d ", (sb->command & 0x40) >> 6); ++ printk("tt:%d(%s) ", tt, tt_string); ++ printk("intr:%d ", (sb->command & 0x8) >> 3); ++ printk("eot:%d ", (sb->command & 0x2) >> 1); ++ printk("eol:%d)", sb->command & 0x1); ++ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len); ++ printk(" next:0x%08lx", sb->next); ++ printk(" buf:0x%08lx\n", sb->buf); ++} ++ ++ ++static void __dump_ep_desc(volatile struct USB_EP_Desc *ep) ++{ ++ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep); ++ printk(" command:0x%04x (", ep->command); ++ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8); ++ printk("enable:%d ", (ep->command & 0x10) >> 4); ++ printk("intr:%d ", (ep->command & 0x8) >> 3); ++ printk("eof:%d ", (ep->command & 0x2) >> 1); ++ printk("eol:%d)", ep->command & 0x1); ++ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len); ++ printk(" next:0x%08lx", ep->next); ++ printk(" sub:0x%08lx\n", ep->sub); + } + +-/* Returns first urb for this epid, or NULL if list is empty. */ +-static inline struct urb *urb_list_first(int epid) ++static inline void __dump_ep_list(int pipe_type) + { +- struct urb *first_urb = 0; ++ volatile struct USB_EP_Desc *ep; ++ volatile struct USB_EP_Desc *first_ep; ++ volatile struct USB_SB_Desc *sb; ++ ++ switch (pipe_type) ++ { ++ case PIPE_BULK: ++ first_ep = &TxBulkEPList[0]; ++ break; ++ case PIPE_CONTROL: ++ first_ep = &TxCtrlEPList[0]; ++ break; ++ case PIPE_INTERRUPT: ++ first_ep = &TxIntrEPList[0]; ++ break; ++ case PIPE_ISOCHRONOUS: ++ first_ep = &TxIsocEPList[0]; ++ break; ++ default: ++ warn("Cannot dump unknown traffic type"); ++ return; ++ } ++ ep = first_ep; ++ ++ printk("\n\nDumping EP list...\n\n"); ++ ++ do { ++ __dump_ep_desc(ep); ++ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ ++ sb = ep->sub ? phys_to_virt(ep->sub) : 0; ++ while (sb) { ++ __dump_sb_desc(sb); ++ sb = sb->next ? phys_to_virt(sb->next) : 0; ++ } ++ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next)); + +- if (!urb_list_empty(epid)) { +- /* Get the first urb (i.e. head->next). */ +- urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); +- first_urb = urb_entry->urb; +- } +- return first_urb; ++ } while (ep != first_ep); + } + +-/* Adds an urb_entry last in the list for this epid. */ +-static inline void urb_list_add(struct urb *urb, int epid) ++static inline void __dump_ept_data(int epid) + { +- urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG); +- assert(urb_entry); ++ unsigned long flags; ++ __u32 r_usb_ept_data; + +- urb_entry->urb = urb; +- list_add_tail(&urb_entry->list, &urb_list[epid]); ++ if (epid < 0 || epid > 31) { ++ printk("Cannot dump ept data for invalid epid %d\n", epid); ++ return; ++ } ++ ++ local_irq_save(flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); ++ nop(); ++ r_usb_ept_data = *R_USB_EPT_DATA; ++ local_irq_restore(flags); ++ ++ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); ++ if (r_usb_ept_data == 0) { ++ /* No need for more detailed printing. */ ++ return; ++ } ++ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); ++ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); ++ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); ++ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); ++ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); ++ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); ++ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); ++ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); ++ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); ++ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); ++ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); ++ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); ++} ++ ++static inline void __dump_ept_data_iso(int epid) ++{ ++ unsigned long flags; ++ __u32 ept_data; ++ ++ if (epid < 0 || epid > 31) { ++ printk("Cannot dump ept data for invalid epid %d\n", epid); ++ return; ++ } ++ ++ local_irq_save(flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); ++ nop(); ++ ept_data = *R_USB_EPT_DATA_ISO; ++ local_irq_restore(flags); ++ ++ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid); ++ if (ept_data == 0) { ++ /* No need for more detailed printing. */ ++ return; ++ } ++ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid, ++ ept_data)); ++ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port, ++ ept_data)); ++ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, ++ ept_data)); ++ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, ++ ept_data)); ++ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, ++ ept_data)); ++ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, ++ ept_data)); + } + +-/* Search through the list for an element that contains this urb. (The list +- is expected to be short and the one we are about to delete will often be +- the first in the list.) */ +-static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) ++static inline void __dump_ept_data_list(void) + { +- struct list_head *entry; +- struct list_head *tmp; +- urb_entry_t *urb_entry; +- +- list_for_each_safe(entry, tmp, &urb_list[epid]) { +- urb_entry = list_entry(entry, urb_entry_t, list); +- assert(urb_entry); +- assert(urb_entry->urb); +- +- if (urb_entry->urb == urb) { +- return urb_entry; +- } +- } +- return 0; +-} ++ int i; + +-/* Delete an urb from the list. */ +-static inline void urb_list_del(struct urb *urb, int epid) +-{ +- urb_entry_t *urb_entry = __urb_list_entry(urb, epid); +- assert(urb_entry); ++ printk("Dumping the whole R_USB_EPT_DATA list\n"); + +- /* Delete entry and free. */ +- list_del(&urb_entry->list); +- kfree(urb_entry); ++ for (i = 0; i < 32; i++) { ++ __dump_ept_data(i); ++ } ++} ++ ++static void debug_epid(int epid) { ++ int i; ++ ++ if(epid_isoc(epid)) { ++ __dump_ept_data_iso(epid); ++ } else { ++ __dump_ept_data(epid); ++ } ++ ++ printk("Bulk:\n"); ++ for(i = 0; i < 32; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i])); ++ } ++ } ++ ++ printk("Ctrl:\n"); ++ for(i = 0; i < 32; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i])); ++ } ++ } ++ ++ printk("Intr:\n"); ++ for(i = 0; i < MAX_INTR_INTERVAL; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i])); ++ } ++ } ++ ++ printk("Isoc:\n"); ++ for(i = 0; i < 32; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i])); ++ } ++ } ++ ++ __dump_ept_data_list(); ++ __dump_ep_list(PIPE_INTERRUPT); ++ printk("\n\n"); ++} ++ ++ ++ ++char* hcd_status_to_str(__u8 bUsbStatus) { ++ static char hcd_status_str[128]; ++ hcd_status_str[0] = '\0'; ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) { ++ strcat(hcd_status_str, "ourun "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) { ++ strcat(hcd_status_str, "perror "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) { ++ strcat(hcd_status_str, "device_mode "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) { ++ strcat(hcd_status_str, "host_mode "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) { ++ strcat(hcd_status_str, "started "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) { ++ strcat(hcd_status_str, "running "); ++ } ++ return hcd_status_str; ++} ++ ++ ++char* sblist_to_str(struct USB_SB_Desc* sb_desc) { ++ static char sblist_to_str_buff[128]; ++ char tmp[32], tmp2[32]; ++ sblist_to_str_buff[0] = '\0'; ++ while(sb_desc != NULL) { ++ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) { ++ case 0: sprintf(tmp, "zout"); break; ++ case 1: sprintf(tmp, "in"); break; ++ case 2: sprintf(tmp, "out"); break; ++ case 3: sprintf(tmp, "setup"); break; ++ } ++ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len); ++ strcat(sblist_to_str_buff, tmp2); ++ if(sb_desc->next != 0) { ++ sb_desc = phys_to_virt(sb_desc->next); ++ } else { ++ sb_desc = NULL; ++ } ++ } ++ return sblist_to_str_buff; ++} ++ ++char* port_status_to_str(__u16 wPortStatus) { ++ static char port_status_str[128]; ++ port_status_str[0] = '\0'; ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) { ++ strcat(port_status_str, "connected "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) { ++ strcat(port_status_str, "enabled "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) { ++ strcat(port_status_str, "suspended "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) { ++ strcat(port_status_str, "reset "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) { ++ strcat(port_status_str, "full-speed "); ++ } else { ++ strcat(port_status_str, "low-speed "); ++ } ++ return port_status_str; ++} ++ ++ ++char* endpoint_to_str(struct usb_endpoint_descriptor *ed) { ++ static char endpoint_to_str_buff[128]; ++ char tmp[32]; ++ int epnum = ed->bEndpointAddress & 0x0F; ++ int dir = ed->bEndpointAddress & 0x80; ++ int type = ed->bmAttributes & 0x03; ++ endpoint_to_str_buff[0] = '\0'; ++ sprintf(endpoint_to_str_buff, "ep:%d ", epnum); ++ switch(type) { ++ case 0: ++ sprintf(tmp, " ctrl"); ++ break; ++ case 1: ++ sprintf(tmp, " isoc"); ++ break; ++ case 2: ++ sprintf(tmp, " bulk"); ++ break; ++ case 3: ++ sprintf(tmp, " intr"); ++ break; ++ } ++ strcat(endpoint_to_str_buff, tmp); ++ if(dir) { ++ sprintf(tmp, " in"); ++ } else { ++ sprintf(tmp, " out"); ++ } ++ strcat(endpoint_to_str_buff, tmp); ++ ++ return endpoint_to_str_buff; ++} ++ ++/* Debug helper functions for Transfer Controller */ ++char* pipe_to_str(unsigned int pipe) { ++ static char pipe_to_str_buff[128]; ++ char tmp[64]; ++ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe)); ++ sprintf(tmp, " type:%s", str_type(pipe)); ++ strcat(pipe_to_str_buff, tmp); ++ ++ sprintf(tmp, " dev:%d", usb_pipedevice(pipe)); ++ strcat(pipe_to_str_buff, tmp); ++ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe)); ++ strcat(pipe_to_str_buff, tmp); ++ return pipe_to_str_buff; + } + +-/* Move an urb to the end of the list. */ +-static inline void urb_list_move_last(struct urb *urb, int epid) +-{ +- urb_entry_t *urb_entry = __urb_list_entry(urb, epid); +- assert(urb_entry); +- +- list_move_tail(&urb_entry->list, &urb_list[epid]); +-} + +-/* Get the next urb in the list. */ +-static inline struct urb *urb_list_next(struct urb *urb, int epid) +-{ +- urb_entry_t *urb_entry = __urb_list_entry(urb, epid); ++#define USB_DEBUG_DESC 1 + +- assert(urb_entry); ++#ifdef USB_DEBUG_DESC ++#define dump_in_desc(x) __dump_in_desc(x) ++#define dump_sb_desc(...) __dump_sb_desc(...) ++#define dump_ep_desc(x) __dump_ep_desc(x) ++#define dump_ept_data(x) __dump_ept_data(x) ++#else ++#define dump_in_desc(...) do {} while (0) ++#define dump_sb_desc(...) do {} while (0) ++#define dump_ep_desc(...) do {} while (0) ++#endif + +- if (urb_entry->list.next != &urb_list[epid]) { +- struct list_head *elem = urb_entry->list.next; +- urb_entry = list_entry(elem, urb_entry_t, list); +- return urb_entry->urb; +- } else { +- return NULL; +- } +-} + ++/* Uncomment this to enable massive function call trace ++ #define USB_DEBUG_TRACE */ + ++#ifdef USB_DEBUG_TRACE ++#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) ++#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) ++#else ++#define DBFENTER do {} while (0) ++#define DBFEXIT do {} while (0) ++#endif + +-/* For debug purposes only. */ +-static inline void urb_list_dump(int epid) +-{ +- struct list_head *entry; +- struct list_head *tmp; +- urb_entry_t *urb_entry; +- int i = 0; +- +- info("Dumping urb list for epid %d", epid); +- +- list_for_each_safe(entry, tmp, &urb_list[epid]) { +- urb_entry = list_entry(entry, urb_entry_t, list); +- info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb); +- } +-} ++#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ ++{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} + +-static void init_rx_buffers(void); +-static int etrax_rh_unlink_urb(struct urb *urb); +-static void etrax_rh_send_irq(struct urb *urb); +-static void etrax_rh_init_int_timer(struct urb *urb); +-static void etrax_rh_int_timer_do(unsigned long ptr); +- +-static int etrax_usb_setup_epid(struct urb *urb); +-static int etrax_usb_lookup_epid(struct urb *urb); +-static int etrax_usb_allocate_epid(void); +-static void etrax_usb_free_epid(int epid); +- +-static int etrax_remove_from_sb_list(struct urb *urb); +- +-static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, +- unsigned mem_flags, dma_addr_t *dma); +-static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); +- +-static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid); +-static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid); +-static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid); +-static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid); +- +-static int etrax_usb_submit_bulk_urb(struct urb *urb); +-static int etrax_usb_submit_ctrl_urb(struct urb *urb); +-static int etrax_usb_submit_intr_urb(struct urb *urb); +-static int etrax_usb_submit_isoc_urb(struct urb *urb); +- +-static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags); +-static int etrax_usb_unlink_urb(struct urb *urb, int status); +-static int etrax_usb_get_frame_number(struct usb_device *usb_dev); +- +-static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc); +-static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc); +-static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc); +-static void etrax_usb_hc_interrupt_bottom_half(void *data); +- +-static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data); +- +- +-/* The following is a list of interrupt handlers for the host controller interrupts we use. +- They are called from etrax_usb_hc_interrupt_bottom_half. */ +-static void etrax_usb_hc_isoc_eof_interrupt(void); +-static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced); +-static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg); +-static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg); +-static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg); +- +-static int etrax_rh_submit_urb (struct urb *urb); +- +-/* Forward declaration needed because they are used in the rx interrupt routine. */ +-static void etrax_usb_complete_urb(struct urb *urb, int status); +-static void etrax_usb_complete_bulk_urb(struct urb *urb, int status); +-static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status); +-static void etrax_usb_complete_intr_urb(struct urb *urb, int status); +-static void etrax_usb_complete_isoc_urb(struct urb *urb, int status); ++/* Most helpful debugging aid */ ++#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__)))) + +-static int etrax_usb_hc_init(void); +-static void etrax_usb_hc_cleanup(void); + +-static struct usb_operations etrax_usb_device_operations = +-{ +- .get_frame_number = etrax_usb_get_frame_number, +- .submit_urb = etrax_usb_submit_urb, +- .unlink_urb = etrax_usb_unlink_urb, +- .buffer_alloc = etrax_usb_buffer_alloc, +- .buffer_free = etrax_usb_buffer_free +-}; ++/***************************************************************************/ ++/***************************************************************************/ ++/* Forward declarations */ ++/***************************************************************************/ ++/***************************************************************************/ ++void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg); ++void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg); ++void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg); ++void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg); ++ ++void rh_port_status_change(__u16[]); ++int rh_clear_port_feature(__u8, __u16); ++int rh_set_port_feature(__u8, __u16); ++static void rh_disable_port(unsigned int port); ++ ++static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, ++ int timer); ++ ++static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, ++ int mem_flags); ++static void tc_free_epid(struct usb_host_endpoint *ep); ++static int tc_allocate_epid(void); ++static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status); ++static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, ++ int status); ++ ++static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, ++ int mem_flags); ++static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb); ++ ++static inline struct urb *urb_list_first(int epid); ++static inline void urb_list_add(struct urb *urb, int epid, ++ int mem_flags); ++static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid); ++static inline void urb_list_del(struct urb *urb, int epid); ++static inline void urb_list_move_last(struct urb *urb, int epid); ++static inline struct urb *urb_list_next(struct urb *urb, int epid); ++ ++int create_sb_for_urb(struct urb *urb, int mem_flags); ++int init_intr_urb(struct urb *urb, int mem_flags); ++ ++static inline void etrax_epid_set(__u8 index, __u32 data); ++static inline void etrax_epid_clear_error(__u8 index); ++static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, ++ __u8 toggle); ++static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout); ++static inline __u32 etrax_epid_get(__u8 index); ++ ++/* We're accessing the same register position in Etrax so ++ when we do full access the internal difference doesn't matter */ ++#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data) ++#define etrax_epid_iso_get(index) etrax_epid_get(index) ++ ++ ++static void tc_dma_process_isoc_urb(struct urb *urb); ++static void tc_dma_process_queue(int epid); ++static void tc_dma_unlink_intr_urb(struct urb *urb); ++static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc); ++static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc); ++ ++static void tc_bulk_start_timer_func(unsigned long dummy); ++static void tc_bulk_eot_timer_func(unsigned long dummy); ++ ++ ++/*************************************************************/ ++/*************************************************************/ ++/* Host Controler Driver block */ ++/*************************************************************/ ++/*************************************************************/ ++ ++/* HCD operations */ ++static irqreturn_t crisv10_hcd_top_irq(int irq, void*); ++static int crisv10_hcd_reset(struct usb_hcd *); ++static int crisv10_hcd_start(struct usb_hcd *); ++static void crisv10_hcd_stop(struct usb_hcd *); ++#ifdef CONFIG_PM ++static int crisv10_hcd_suspend(struct device *, u32, u32); ++static int crisv10_hcd_resume(struct device *, u32); ++#endif /* CONFIG_PM */ ++static int crisv10_hcd_get_frame(struct usb_hcd *); ++ ++static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags); ++static int tc_urb_dequeue(struct usb_hcd *, struct urb *); ++static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep); ++ ++static int rh_status_data_request(struct usb_hcd *, char *); ++static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16); ++ ++#ifdef CONFIG_PM ++static int crisv10_hcd_hub_suspend(struct usb_hcd *); ++static int crisv10_hcd_hub_resume(struct usb_hcd *); ++#endif /* CONFIG_PM */ ++#ifdef CONFIG_USB_OTG ++static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned); ++#endif /* CONFIG_USB_OTG */ ++ ++/* host controller driver interface */ ++static const struct hc_driver crisv10_hc_driver = ++ { ++ .description = hc_name, ++ .product_desc = product_desc, ++ .hcd_priv_size = sizeof(struct crisv10_hcd), ++ ++ /* Attaching IRQ handler manualy in probe() */ ++ /* .irq = crisv10_hcd_irq, */ ++ ++ .flags = HCD_USB11, ++ ++ /* called to init HCD and root hub */ ++ .reset = crisv10_hcd_reset, ++ .start = crisv10_hcd_start, ++ ++ /* cleanly make HCD stop writing memory and doing I/O */ ++ .stop = crisv10_hcd_stop, ++ ++ /* return current frame number */ ++ .get_frame_number = crisv10_hcd_get_frame, ++ ++ ++ /* Manage i/o requests via the Transfer Controller */ ++ .urb_enqueue = tc_urb_enqueue, ++ .urb_dequeue = tc_urb_dequeue, ++ ++ /* hw synch, freeing endpoint resources that urb_dequeue can't */ ++ .endpoint_disable = tc_endpoint_disable, ++ ++ ++ /* Root Hub support */ ++ .hub_status_data = rh_status_data_request, ++ .hub_control = rh_control_request, ++#ifdef CONFIG_PM ++ .hub_suspend = rh_suspend_request, ++ .hub_resume = rh_resume_request, ++#endif /* CONFIG_PM */ ++#ifdef CONFIG_USB_OTG ++ .start_port_reset = crisv10_hcd_start_port_reset, ++#endif /* CONFIG_USB_OTG */ ++ }; + +-/* Note that these functions are always available in their "__" variants, for use in +- error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/ +- USB_DEBUG_URB macros. */ +-static void __dump_urb(struct urb* purb) +-{ +- printk("\nurb :0x%08lx\n", (unsigned long)purb); +- printk("dev :0x%08lx\n", (unsigned long)purb->dev); +- printk("pipe :0x%08x\n", purb->pipe); +- printk("status :%d\n", purb->status); +- printk("transfer_flags :0x%08x\n", purb->transfer_flags); +- printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); +- printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); +- printk("actual_length :%d\n", purb->actual_length); +- printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); +- printk("start_frame :%d\n", purb->start_frame); +- printk("number_of_packets :%d\n", purb->number_of_packets); +- printk("interval :%d\n", purb->interval); +- printk("error_count :%d\n", purb->error_count); +- printk("context :0x%08lx\n", (unsigned long)purb->context); +- printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); +-} + +-static void __dump_in_desc(volatile USB_IN_Desc_t *in) +-{ +- printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); +- printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); +- printk(" command : 0x%04x\n", in->command); +- printk(" next : 0x%08lx\n", in->next); +- printk(" buf : 0x%08lx\n", in->buf); +- printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); +- printk(" status : 0x%04x\n\n", in->status); +-} ++/* ++ * conversion between pointers to a hcd and the corresponding ++ * crisv10_hcd ++ */ + +-static void __dump_sb_desc(volatile USB_SB_Desc_t *sb) ++static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd) + { +- char tt = (sb->command & 0x30) >> 4; +- char *tt_string; +- +- switch (tt) { +- case 0: +- tt_string = "zout"; +- break; +- case 1: +- tt_string = "in"; +- break; +- case 2: +- tt_string = "out"; +- break; +- case 3: +- tt_string = "setup"; +- break; +- default: +- tt_string = "unknown (weird)"; +- } +- +- printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb); +- printk(" command : 0x%04x\n", sb->command); +- printk(" rem : %d\n", (sb->command & 0x3f00) >> 8); +- printk(" full : %d\n", (sb->command & 0x40) >> 6); +- printk(" tt : %d (%s)\n", tt, tt_string); +- printk(" intr : %d\n", (sb->command & 0x8) >> 3); +- printk(" eot : %d\n", (sb->command & 0x2) >> 1); +- printk(" eol : %d\n", sb->command & 0x1); +- printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len); +- printk(" next : 0x%08lx\n", sb->next); +- printk(" buf : 0x%08lx\n\n", sb->buf); ++ return (struct crisv10_hcd *) hcd->hcd_priv; + } + +- +-static void __dump_ep_desc(volatile USB_EP_Desc_t *ep) ++static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd) + { +- printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep); +- printk(" command : 0x%04x\n", ep->command); +- printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8); +- printk(" enable : %d\n", (ep->command & 0x10) >> 4); +- printk(" intr : %d\n", (ep->command & 0x8) >> 3); +- printk(" eof : %d\n", (ep->command & 0x2) >> 1); +- printk(" eol : %d\n", ep->command & 0x1); +- printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len); +- printk(" next : 0x%08lx\n", ep->next); +- printk(" sub : 0x%08lx\n\n", ep->sub); ++ return container_of((void *) hcd, struct usb_hcd, hcd_priv); + } + +-static inline void __dump_ep_list(int pipe_type) ++/* check if specified port is in use */ ++static inline int port_in_use(unsigned int port) + { +- volatile USB_EP_Desc_t *ep; +- volatile USB_EP_Desc_t *first_ep; +- volatile USB_SB_Desc_t *sb; +- +- switch (pipe_type) +- { +- case PIPE_BULK: +- first_ep = &TxBulkEPList[0]; +- break; +- case PIPE_CONTROL: +- first_ep = &TxCtrlEPList[0]; +- break; +- case PIPE_INTERRUPT: +- first_ep = &TxIntrEPList[0]; +- break; +- case PIPE_ISOCHRONOUS: +- first_ep = &TxIsocEPList[0]; +- break; +- default: +- warn("Cannot dump unknown traffic type"); +- return; +- } +- ep = first_ep; +- +- printk("\n\nDumping EP list...\n\n"); +- +- do { +- __dump_ep_desc(ep); +- /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ +- sb = ep->sub ? phys_to_virt(ep->sub) : 0; +- while (sb) { +- __dump_sb_desc(sb); +- sb = sb->next ? phys_to_virt(sb->next) : 0; +- } +- ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next)); +- +- } while (ep != first_ep); ++ return ports & (1 << port); + } + +-static inline void __dump_ept_data(int epid) ++/* number of ports in use */ ++static inline unsigned int num_ports(void) + { +- unsigned long flags; +- __u32 r_usb_ept_data; +- +- if (epid < 0 || epid > 31) { +- printk("Cannot dump ept data for invalid epid %d\n", epid); +- return; +- } +- +- save_flags(flags); +- cli(); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- r_usb_ept_data = *R_USB_EPT_DATA; +- restore_flags(flags); +- +- printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); +- if (r_usb_ept_data == 0) { +- /* No need for more detailed printing. */ +- return; +- } +- printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); +- printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); +- printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); +- printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); +- printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); +- printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); +- printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); +- printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); +- printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); +- printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); +- printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); +- printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); ++ unsigned int i, num = 0; ++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) ++ if (port_in_use(i)) ++ num++; ++ return num; + } + +-static inline void __dump_ept_data_list(void) ++/* map hub port number to the port number used internally by the HC */ ++static inline unsigned int map_port(unsigned int port) + { +- int i; +- +- printk("Dumping the whole R_USB_EPT_DATA list\n"); +- +- for (i = 0; i < 32; i++) { +- __dump_ept_data(i); +- } ++ unsigned int i, num = 0; ++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) ++ if (port_in_use(i)) ++ if (++num == port) ++ return i; ++ return -1; + } +-#ifdef USB_DEBUG_DESC +-#define dump_in_desc(...) __dump_in_desc(...) +-#define dump_sb_desc(...) __dump_sb_desc(...) +-#define dump_ep_desc(...) __dump_ep_desc(...) +-#else +-#define dump_in_desc(...) do {} while (0) +-#define dump_sb_desc(...) do {} while (0) +-#define dump_ep_desc(...) do {} while (0) +-#endif + +-#ifdef USB_DEBUG_URB +-#define dump_urb(x) __dump_urb(x) +-#else +-#define dump_urb(x) do {} while (0) ++/* size of descriptors in slab cache */ ++#ifndef MAX ++#define MAX(x, y) ((x) > (y) ? (x) : (y)) + #endif + +-static void init_rx_buffers(void) +-{ +- int i; + +- DBFENTER; ++/******************************************************************/ ++/* Hardware Interrupt functions */ ++/******************************************************************/ ++ ++/* Fast interrupt handler for HC */ ++static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd) ++{ ++ struct usb_hcd *hcd = vcd; ++ struct crisv10_irq_reg reg; ++ __u32 irq_mask; ++ unsigned long flags; ++ ++ DBFENTER; ++ ++ ASSERT(hcd != NULL); ++ reg.hcd = hcd; ++ ++ /* Turn of other interrupts while handling these sensitive cases */ ++ local_irq_save(flags); ++ ++ /* Read out which interrupts that are flaged */ ++ irq_mask = *R_USB_IRQ_MASK_READ; ++ reg.r_usb_irq_mask_read = irq_mask; ++ ++ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that ++ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter ++ clears the ourun and perror fields of R_USB_STATUS. */ ++ reg.r_usb_status = *R_USB_STATUS; ++ ++ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn ++ interrupts. */ ++ reg.r_usb_epid_attn = *R_USB_EPID_ATTN; ++ ++ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the ++ port_status interrupt. */ ++ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1; ++ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2; ++ ++ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ ++ /* Note: the lower 11 bits contain the actual frame number, sent with each ++ sof. */ ++ reg.r_usb_fm_number = *R_USB_FM_NUMBER; ++ ++ /* Interrupts are handled in order of priority. */ ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { ++ crisv10_hcd_port_status_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { ++ crisv10_hcd_epid_attn_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { ++ crisv10_hcd_ctl_status_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { ++ crisv10_hcd_isoc_eof_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { ++ /* Update/restart the bulk start timer since obviously the channel is ++ running. */ ++ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); ++ /* Update/restart the bulk eot timer since we just received an bulk eot ++ interrupt. */ ++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); ++ ++ /* Check for finished bulk transfers on epids */ ++ check_finished_bulk_tx_epids(hcd, 0); ++ } ++ local_irq_restore(flags); ++ ++ DBFEXIT; ++ return IRQ_HANDLED; ++} ++ ++ ++void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) { ++ struct usb_hcd *hcd = reg->hcd; ++ struct crisv10_urb_priv *urb_priv; ++ int epid; ++ DBFENTER; ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if (test_bit(epid, (void *)®->r_usb_epid_attn)) { ++ struct urb *urb; ++ __u32 ept_data; ++ int error_code; ++ ++ if (epid == DUMMY_EPID || epid == INVALID_EPID) { ++ /* We definitely don't care about these ones. Besides, they are ++ always disabled, so any possible disabling caused by the ++ epid attention interrupt is irrelevant. */ ++ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid); ++ continue; ++ } ++ ++ if(!epid_inuse(epid)) { ++ irq_err("Epid attention on epid:%d that isn't in use\n", epid); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ debug_epid(epid); ++ continue; ++ } ++ ++ /* Note that although there are separate R_USB_EPT_DATA and ++ R_USB_EPT_DATA_ISO registers, they are located at the same address and ++ are of the same size. In other words, this read should be ok for isoc ++ also. */ ++ ept_data = etrax_epid_get(epid); ++ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data); ++ ++ /* Get the active URB for this epid. We blatantly assume ++ that only this URB could have caused the epid attention. */ ++ urb = activeUrbList[epid]; ++ if (urb == NULL) { ++ irq_err("Attention on epid:%d error:%d with no active URB.\n", ++ epid, error_code); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ debug_epid(epid); ++ continue; ++ } ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ ++ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ ++ /* Isoc traffic doesn't have error_count_in/error_count_out. */ ++ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && ++ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 || ++ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) { ++ /* Check if URB allready is marked for late-finish, we can get ++ several 3rd error for Intr traffic when a device is unplugged */ ++ if(urb_priv->later_data == NULL) { ++ /* 3rd error. */ ++ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe), ++ (unsigned int)urb, urb_priv->urb_num); ++ ++ tc_finish_urb_later(hcd, urb, -EPROTO); ++ } ++ ++ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { ++ irq_warn("Perror for epid:%d\n", epid); ++ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ __dump_urb(urb); ++ debug_epid(epid); ++ ++ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { ++ /* invalid ep_id */ ++ panic("Perror because of invalid epid." ++ " Deconfigured too early?"); ++ } else { ++ /* past eof1, near eof, zout transfer, setup transfer */ ++ /* Dump the urb and the relevant EP descriptor. */ ++ panic("Something wrong with DMA descriptor contents." ++ " Too much traffic inserted?"); ++ } ++ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { ++ /* buffer ourun */ ++ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ __dump_urb(urb); ++ debug_epid(epid); + +- for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { +- RxDescList[i].sw_len = RX_DESC_BUF_SIZE; +- RxDescList[i].command = 0; +- RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); +- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); +- RxDescList[i].hw_len = 0; +- RxDescList[i].status = 0; +- +- /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc +- for the relevant fields.) */ +- prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); ++ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid); ++ } else { ++ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe)); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ __dump_urb(urb); ++ debug_epid(epid); ++ } + ++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, ++ stall)) { ++ /* Not really a protocol error, just says that the endpoint gave ++ a stall response. Note that error_code cannot be stall for isoc. */ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ panic("Isoc traffic cannot stall"); + } + +- RxDescList[i].sw_len = RX_DESC_BUF_SIZE; +- RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); +- RxDescList[i].next = virt_to_phys(&RxDescList[0]); +- RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); +- RxDescList[i].hw_len = 0; +- RxDescList[i].status = 0; ++ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb); ++ tc_finish_urb(hcd, urb, -EPIPE); ++ ++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, ++ bus_error)) { ++ /* Two devices responded to a transaction request. Must be resolved ++ by software. FIXME: Reset ports? */ ++ panic("Bus error for epid %d." ++ " Two devices responded to transaction request\n", ++ epid); ++ ++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, ++ buffer_error)) { ++ /* DMA overrun or underrun. */ ++ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe)); ++ ++ /* It seems that error_code = buffer_error in ++ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS ++ are the same error. */ ++ tc_finish_urb(hcd, urb, -EPROTO); ++ } else { ++ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe)); ++ dump_ept_data(epid); ++ } ++ } ++ } ++ DBFEXIT; ++} ++ ++void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg) ++{ ++ __u16 port_reg[USB_ROOT_HUB_PORTS]; ++ DBFENTER; ++ port_reg[0] = reg->r_usb_rh_port_status_1; ++ port_reg[1] = reg->r_usb_rh_port_status_2; ++ rh_port_status_change(port_reg); ++ DBFEXIT; ++} ++ ++void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg) ++{ ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv *urb_priv; ++ ++ DBFENTER; ++ ++ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { ++ ++ /* Only check epids that are in use, is valid and has SB list */ ++ if (!epid_inuse(epid) || epid == INVALID_EPID || ++ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) { ++ /* Nothing here to see. */ ++ continue; ++ } ++ ASSERT(epid_isoc(epid)); ++ ++ /* Get the active URB for this epid (if any). */ ++ urb = activeUrbList[epid]; ++ if (urb == 0) { ++ isoc_warn("Ignoring NULL urb for epid:%d\n", epid); ++ continue; ++ } ++ if(!epid_out_traffic(epid)) { ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ if (urb_priv->urb_state == NOT_STARTED) { ++ /* If ASAP is not set and urb->start_frame is the current frame, ++ start the transfer. */ ++ if (!(urb->transfer_flags & URB_ISO_ASAP) && ++ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { ++ /* EP should not be enabled if we're waiting for start_frame */ ++ ASSERT((TxIsocEPList[epid].command & ++ IO_STATE(USB_EP_command, enable, yes)) == 0); ++ ++ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid); ++ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ ++ /* This urb is now active. */ ++ urb_priv->urb_state = STARTED; ++ continue; ++ } ++ } ++ } ++ } ++ ++ DBFEXIT; ++} ++ ++void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg) ++{ ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd); ++ ++ DBFENTER; ++ ASSERT(crisv10_hcd); ++ ++ irq_dbg("ctr_status_irq, controller status: %s\n", ++ hcd_status_to_str(reg->r_usb_status)); ++ ++ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB ++ list for the corresponding epid? */ ++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { ++ panic("USB controller got ourun."); ++ } ++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { ++ ++ /* Before, etrax_usb_do_intr_recover was called on this epid if it was ++ an interrupt pipe. I don't see how re-enabling all EP descriptors ++ will help if there was a programming error. */ ++ panic("USB controller got perror."); ++ } ++ ++ /* Keep track of USB Controller, if it's running or not */ ++ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) { ++ crisv10_hcd->running = 1; ++ } else { ++ crisv10_hcd->running = 0; ++ } ++ ++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { ++ /* We should never operate in device mode. */ ++ panic("USB controller in device mode."); ++ } ++ ++ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably ++ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */ ++ set_bit(HCD_FLAG_SAW_IRQ, ®->hcd->flags); ++ ++ DBFEXIT; ++} ++ ++ ++/******************************************************************/ ++/* Host Controller interface functions */ ++/******************************************************************/ ++ ++static inline void crisv10_ready_wait(void) { ++ volatile int timeout = 10000; ++ /* Check the busy bit of USB controller in Etrax */ ++ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for USB controller to be idle\n"); ++ } ++} ++ ++/* reset host controller */ ++static int crisv10_hcd_reset(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ hcd_dbg(hcd, "reset\n"); ++ ++ ++ /* Reset the USB interface. */ ++ /* ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); ++ nop(); ++ */ ++ DBFEXIT; ++ return 0; ++} ++ ++/* start host controller */ ++static int crisv10_hcd_start(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ hcd_dbg(hcd, "start\n"); ++ ++ crisv10_ready_wait(); ++ ++ /* Start processing of USB traffic. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); ++ ++ nop(); ++ ++ hcd->state = HC_STATE_RUNNING; ++ ++ DBFEXIT; ++ return 0; ++} ++ ++/* stop host controller */ ++static void crisv10_hcd_stop(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ hcd_dbg(hcd, "stop\n"); ++ crisv10_hcd_reset(hcd); ++ DBFEXIT; ++} ++ ++/* return the current frame number */ ++static int crisv10_hcd_get_frame(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ DBFEXIT; ++ return (*R_USB_FM_NUMBER & 0x7ff); ++} ++ ++#ifdef CONFIG_USB_OTG ++ ++static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port) ++{ ++ return 0; /* no-op for now */ ++} ++ ++#endif /* CONFIG_USB_OTG */ ++ ++ ++/******************************************************************/ ++/* Root Hub functions */ ++/******************************************************************/ ++ ++/* root hub status */ ++static const struct usb_hub_status rh_hub_status = ++ { ++ .wHubStatus = 0, ++ .wHubChange = 0, ++ }; ++ ++/* root hub descriptor */ ++static const u8 rh_hub_descr[] = ++ { ++ 0x09, /* bDescLength */ ++ 0x29, /* bDescriptorType */ ++ USB_ROOT_HUB_PORTS, /* bNbrPorts */ ++ 0x00, /* wHubCharacteristics */ ++ 0x00, ++ 0x01, /* bPwrOn2pwrGood */ ++ 0x00, /* bHubContrCurrent */ ++ 0x00, /* DeviceRemovable */ ++ 0xff /* PortPwrCtrlMask */ ++ }; ++ ++/* Actual holder of root hub status*/ ++struct crisv10_rh rh; ++ ++/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */ ++int rh_init(void) { ++ int i; ++ /* Reset port status flags */ ++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) { ++ rh.wPortChange[i] = 0; ++ rh.wPortStatusPrev[i] = 0; ++ } ++ return 0; ++} ++ ++#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\ ++ (1<<USB_PORT_FEAT_ENABLE)|\ ++ (1<<USB_PORT_FEAT_SUSPEND)|\ ++ (1<<USB_PORT_FEAT_RESET)) ++ ++/* Handle port status change interrupt (called from bottom part interrupt) */ ++void rh_port_status_change(__u16 port_reg[]) { ++ int i; ++ __u16 wChange; ++ ++ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) { ++ /* Xor out changes since last read, masked for important flags */ ++ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i]; ++ /* Or changes together with (if any) saved changes */ ++ rh.wPortChange[i] |= wChange; ++ /* Save new status */ ++ rh.wPortStatusPrev[i] = port_reg[i]; ++ ++ if(wChange) { ++ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1, ++ port_status_to_str(wChange), ++ port_status_to_str(port_reg[i])); ++ } ++ } ++} ++ ++/* Construct port status change bitmap for the root hub */ ++static int rh_status_data_request(struct usb_hcd *hcd, char *buf) ++{ ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ unsigned int i; ++ ++ DBFENTER; ++ /* ++ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4) ++ * return bitmap indicating ports with status change ++ */ ++ *buf = 0; ++ spin_lock(&crisv10_hcd->lock); ++ for (i = 1; i <= crisv10_hcd->num_ports; i++) { ++ if (rh.wPortChange[map_port(i)]) { ++ *buf |= (1 << i); ++ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i, ++ port_status_to_str(rh.wPortChange[map_port(i)]), ++ port_status_to_str(rh.wPortStatusPrev[map_port(i)])); ++ } ++ } ++ spin_unlock(&crisv10_hcd->lock); ++ DBFEXIT; ++ return *buf == 0 ? 0 : 1; ++} ++ ++/* Handle a control request for the root hub (called from hcd_driver) */ ++static int rh_control_request(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, ++ u16 wIndex, ++ char *buf, ++ u16 wLength) { ++ ++ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ int retval = 0; ++ int len; ++ DBFENTER; ++ ++ switch (typeReq) { ++ case GetHubDescriptor: ++ rh_dbg("GetHubDescriptor\n"); ++ len = min_t(unsigned int, sizeof rh_hub_descr, wLength); ++ memcpy(buf, rh_hub_descr, len); ++ buf[2] = crisv10_hcd->num_ports; ++ break; ++ case GetHubStatus: ++ rh_dbg("GetHubStatus\n"); ++ len = min_t(unsigned int, sizeof rh_hub_status, wLength); ++ memcpy(buf, &rh_hub_status, len); ++ break; ++ case GetPortStatus: ++ if (!wIndex || wIndex > crisv10_hcd->num_ports) ++ goto error; ++ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex, ++ port_status_to_str(rh.wPortChange[map_port(wIndex)]), ++ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)])); ++ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]); ++ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]); ++ break; ++ case SetHubFeature: ++ rh_dbg("SetHubFeature\n"); ++ case ClearHubFeature: ++ rh_dbg("ClearHubFeature\n"); ++ switch (wValue) { ++ case C_HUB_OVER_CURRENT: ++ case C_HUB_LOCAL_POWER: ++ rh_warn("Not implemented hub request:%d \n", typeReq); ++ /* not implemented */ ++ break; ++ default: ++ goto error; ++ } ++ break; ++ case SetPortFeature: ++ if (!wIndex || wIndex > crisv10_hcd->num_ports) ++ goto error; ++ if(rh_set_port_feature(map_port(wIndex), wValue)) ++ goto error; ++ break; ++ case ClearPortFeature: ++ if (!wIndex || wIndex > crisv10_hcd->num_ports) ++ goto error; ++ if(rh_clear_port_feature(map_port(wIndex), wValue)) ++ goto error; ++ break; ++ default: ++ rh_warn("Unknown hub request: %d\n", typeReq); ++ error: ++ retval = -EPIPE; ++ } ++ DBFEXIT; ++ return retval; ++} ++ ++int rh_set_port_feature(__u8 bPort, __u16 wFeature) { ++ __u8 bUsbCommand = 0; ++ switch(wFeature) { ++ case USB_PORT_FEAT_RESET: ++ rh_dbg("SetPortFeature: reset\n"); ++ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset); ++ goto set; ++ break; ++ case USB_PORT_FEAT_SUSPEND: ++ rh_dbg("SetPortFeature: suspend\n"); ++ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend); ++ goto set; ++ break; ++ case USB_PORT_FEAT_POWER: ++ rh_dbg("SetPortFeature: power\n"); ++ break; ++ case USB_PORT_FEAT_C_CONNECTION: ++ rh_dbg("SetPortFeature: c_connection\n"); ++ break; ++ case USB_PORT_FEAT_C_RESET: ++ rh_dbg("SetPortFeature: c_reset\n"); ++ break; ++ case USB_PORT_FEAT_C_OVER_CURRENT: ++ rh_dbg("SetPortFeature: c_over_current\n"); ++ break; ++ ++ set: ++ /* Select which port via the port_sel field */ ++ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); ++ ++ /* Make sure the controller isn't busy. */ ++ crisv10_ready_wait(); ++ /* Send out the actual command to the USB controller */ ++ *R_USB_COMMAND = bUsbCommand; ++ ++ /* If port reset then also bring USB controller into running state */ ++ if(wFeature == USB_PORT_FEAT_RESET) { ++ /* Wait a while for controller to first become started after port reset */ ++ udelay(12000); /* 12ms blocking wait */ ++ ++ /* Make sure the controller isn't busy. */ ++ crisv10_ready_wait(); ++ ++ /* If all enabled ports were disabled the host controller goes down into ++ started mode, so we need to bring it back into the running state. ++ (This is safe even if it's already in the running state.) */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); ++ } ++ ++ break; ++ default: ++ rh_dbg("SetPortFeature: unknown feature\n"); ++ return -1; ++ } ++ return 0; ++} ++ ++int rh_clear_port_feature(__u8 bPort, __u16 wFeature) { ++ switch(wFeature) { ++ case USB_PORT_FEAT_ENABLE: ++ rh_dbg("ClearPortFeature: enable\n"); ++ rh_disable_port(bPort); ++ break; ++ case USB_PORT_FEAT_SUSPEND: ++ rh_dbg("ClearPortFeature: suspend\n"); ++ break; ++ case USB_PORT_FEAT_POWER: ++ rh_dbg("ClearPortFeature: power\n"); ++ break; ++ ++ case USB_PORT_FEAT_C_ENABLE: ++ rh_dbg("ClearPortFeature: c_enable\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_SUSPEND: ++ rh_dbg("ClearPortFeature: c_suspend\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_CONNECTION: ++ rh_dbg("ClearPortFeature: c_connection\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_OVER_CURRENT: ++ rh_dbg("ClearPortFeature: c_over_current\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_RESET: ++ rh_dbg("ClearPortFeature: c_reset\n"); ++ goto clear; ++ clear: ++ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16)); ++ break; ++ default: ++ rh_dbg("ClearPortFeature: unknown feature\n"); ++ return -1; ++ } ++ return 0; ++} ++ ++ ++#ifdef CONFIG_PM ++/* Handle a suspend request for the root hub (called from hcd_driver) */ ++static int rh_suspend_request(struct usb_hcd *hcd) ++{ ++ return 0; /* no-op for now */ ++} ++ ++/* Handle a resume request for the root hub (called from hcd_driver) */ ++static int rh_resume_request(struct usb_hcd *hcd) ++{ ++ return 0; /* no-op for now */ ++} ++#endif /* CONFIG_PM */ ++ ++ ++ ++/* Wrapper function for workaround port disable registers in USB controller */ ++static void rh_disable_port(unsigned int port) { ++ volatile int timeout = 10000; ++ volatile char* usb_portx_disable; ++ switch(port) { ++ case 0: ++ usb_portx_disable = R_USB_PORT1_DISABLE; ++ break; ++ case 1: ++ usb_portx_disable = R_USB_PORT2_DISABLE; ++ break; ++ default: ++ /* Invalid port index */ ++ return; ++ } ++ /* Set disable flag in special register */ ++ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); ++ /* Wait until not enabled anymore */ ++ while((rh.wPortStatusPrev[port] & ++ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for port %d to become disabled\n", port); ++ } ++ /* clear disable flag in special register */ ++ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no); ++ rh_info("Physical port %d disabled\n", port+1); ++} ++ ++ ++/******************************************************************/ ++/* Transfer Controller (TC) functions */ ++/******************************************************************/ ++ ++/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it ++ dynamically? ++ To adjust it dynamically we would have to get an interrupt when we reach ++ the end of the rx descriptor list, or when we get close to the end, and ++ then allocate more descriptors. */ ++#define NBR_OF_RX_DESC 512 ++#define RX_DESC_BUF_SIZE 1024 ++#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) + +- myNextRxDesc = &RxDescList[0]; +- myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; +- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; + +- *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); +- *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); ++/* Local variables for Transfer Controller */ ++/* --------------------------------------- */ + +- DBFEXIT; +-} ++/* This is a circular (double-linked) list of the active urbs for each epid. ++ The head is never removed, and new urbs are linked onto the list as ++ urb_entry_t elements. Don't reference urb_list directly; use the wrapper ++ functions instead (which includes spin_locks) */ ++static struct list_head urb_list[NBR_OF_EPIDS]; + +-static void init_tx_bulk_ep(void) +-{ +- int i; ++/* Read about the need and usage of this lock in submit_ctrl_urb. */ ++/* Lock for URB lists for each EPID */ ++static spinlock_t urb_list_lock; + +- DBFENTER; ++/* Lock for EPID array register (R_USB_EPT_x) in Etrax */ ++static spinlock_t etrax_epid_lock; + +- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { +- CHECK_ALIGN(&TxBulkEPList[i]); +- TxBulkEPList[i].hw_len = 0; +- TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i); +- TxBulkEPList[i].sub = 0; +- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]); +- +- /* Initiate two EPs, disabled and with the eol flag set. No need for any +- preserved epid. */ +- +- /* The first one has the intr flag set so we get an interrupt when the DMA +- channel is about to become disabled. */ +- CHECK_ALIGN(&TxBulkDummyEPList[i][0]); +- TxBulkDummyEPList[i][0].hw_len = 0; +- TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | +- IO_STATE(USB_EP_command, eol, yes) | +- IO_STATE(USB_EP_command, intr, yes)); +- TxBulkDummyEPList[i][0].sub = 0; +- TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); +- +- /* The second one. */ +- CHECK_ALIGN(&TxBulkDummyEPList[i][1]); +- TxBulkDummyEPList[i][1].hw_len = 0; +- TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | +- IO_STATE(USB_EP_command, eol, yes)); +- TxBulkDummyEPList[i][1].sub = 0; +- /* The last dummy's next pointer is the same as the current EP's next pointer. */ +- TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); +- } ++/* Lock for dma8 sub0 handling */ ++static spinlock_t etrax_dma8_sub0_lock; + +- /* Configure the last one. */ +- CHECK_ALIGN(&TxBulkEPList[i]); +- TxBulkEPList[i].hw_len = 0; +- TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | +- IO_FIELD(USB_EP_command, epid, i)); +- TxBulkEPList[i].sub = 0; +- TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]); +- +- /* No need configuring dummy EPs for the last one as it will never be used for +- bulk traffic (i == INVALD_EPID at this point). */ +- +- /* Set up to start on the last EP so we will enable it when inserting traffic +- for the first time (imitating the situation where the DMA has stopped +- because there was no more traffic). */ +- *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); +- /* No point in starting the bulk channel yet. +- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ +- DBFEXIT; +-} ++/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. ++ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be ++ cache aligned. */ ++static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); ++static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); + +-static void init_tx_ctrl_ep(void) +-{ +- int i; ++/* Pointers into RxDescList. */ ++static volatile struct USB_IN_Desc *myNextRxDesc; ++static volatile struct USB_IN_Desc *myLastRxDesc; + +- DBFENTER; ++/* A zout transfer makes a memory access at the address of its buf pointer, ++ which means that setting this buf pointer to 0 will cause an access to the ++ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes ++ (depending on DMA burst size) transfer. ++ Instead, we set it to 1, and point it to this buffer. */ ++static int zout_buffer[4] __attribute__ ((aligned (4))); + +- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { +- CHECK_ALIGN(&TxCtrlEPList[i]); +- TxCtrlEPList[i].hw_len = 0; +- TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i); +- TxCtrlEPList[i].sub = 0; +- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]); +- } ++/* Cache for allocating new EP and SB descriptors. */ ++static kmem_cache_t *usb_desc_cache; + +- CHECK_ALIGN(&TxCtrlEPList[i]); +- TxCtrlEPList[i].hw_len = 0; +- TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | +- IO_FIELD(USB_EP_command, epid, i)); ++/* Cache for the data allocated in the isoc descr top half. */ ++static kmem_cache_t *isoc_compl_cache; + +- TxCtrlEPList[i].sub = 0; +- TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]); ++/* Cache for the data allocated when delayed finishing of URBs */ ++static kmem_cache_t *later_data_cache; + +- *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]); +- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); + +- DBFEXIT; ++/* Counter to keep track of how many Isoc EP we have sat up. Used to enable ++ and disable iso_eof interrupt. We only need these interrupts when we have ++ Isoc data endpoints (consumes CPU cycles). ++ FIXME: This could be more fine granular, so this interrupt is only enabled ++ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */ ++static int isoc_epid_counter; ++ ++/* Protecting wrapper functions for R_USB_EPT_x */ ++/* -------------------------------------------- */ ++static inline void etrax_epid_set(__u8 index, __u32 data) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ *R_USB_EPT_DATA = data; ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++} ++ ++static inline void etrax_epid_clear_error(__u8 index) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ *R_USB_EPT_DATA &= ++ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | ++ IO_MASK(R_USB_EPT_DATA, error_count_out) | ++ IO_MASK(R_USB_EPT_DATA, error_code)); ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++} ++ ++static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, ++ __u8 toggle) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ if(dirout) { ++ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); ++ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); ++ } else { ++ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); ++ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); ++ } ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++} ++ ++static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) { ++ unsigned long flags; ++ __u8 toggle; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ if (dirout) { ++ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); ++ } else { ++ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); ++ } ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++ return toggle; ++} ++ ++ ++static inline __u32 etrax_epid_get(__u8 index) { ++ unsigned long flags; ++ __u32 data; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ data = *R_USB_EPT_DATA; ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++ return data; ++} ++ ++ ++ ++ ++/* Main functions for Transfer Controller */ ++/* -------------------------------------- */ ++ ++/* Init structs, memories and lists used by Transfer Controller */ ++int tc_init(struct usb_hcd *hcd) { ++ int i; ++ /* Clear software state info for all epids */ ++ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS); ++ ++ /* Set Invalid and Dummy as being in use and disabled */ ++ epid_state[INVALID_EPID].inuse = 1; ++ epid_state[DUMMY_EPID].inuse = 1; ++ epid_state[INVALID_EPID].disabled = 1; ++ epid_state[DUMMY_EPID].disabled = 1; ++ ++ /* Clear counter for how many Isoc epids we have sat up */ ++ isoc_epid_counter = 0; ++ ++ /* Initialize the urb list by initiating a head for each list. ++ Also reset list hodling active URB for each epid */ ++ for (i = 0; i < NBR_OF_EPIDS; i++) { ++ INIT_LIST_HEAD(&urb_list[i]); ++ activeUrbList[i] = NULL; ++ } ++ ++ /* Init lock for URB lists */ ++ spin_lock_init(&urb_list_lock); ++ /* Init lock for Etrax R_USB_EPT register */ ++ spin_lock_init(&etrax_epid_lock); ++ /* Init lock for Etrax dma8 sub0 handling */ ++ spin_lock_init(&etrax_dma8_sub0_lock); ++ ++ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ ++ ++ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also ++ allocate SB descriptors from this cache. This is ok since ++ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */ ++ usb_desc_cache = kmem_cache_create("usb_desc_cache", ++ sizeof(struct USB_EP_Desc), 0, ++ SLAB_HWCACHE_ALIGN, 0, 0); ++ if(usb_desc_cache == NULL) { ++ return -ENOMEM; ++ } ++ ++ /* Create slab cache for speedy allocation of memory for isoc bottom-half ++ interrupt handling */ ++ isoc_compl_cache = ++ kmem_cache_create("isoc_compl_cache", ++ sizeof(struct crisv10_isoc_complete_data), ++ 0, SLAB_HWCACHE_ALIGN, 0, 0); ++ if(isoc_compl_cache == NULL) { ++ return -ENOMEM; ++ } ++ ++ /* Create slab cache for speedy allocation of memory for later URB finish ++ struct */ ++ later_data_cache = ++ kmem_cache_create("later_data_cache", ++ sizeof(struct urb_later_data), ++ 0, SLAB_HWCACHE_ALIGN, 0, 0); ++ if(later_data_cache == NULL) { ++ return -ENOMEM; ++ } ++ ++ ++ /* Initiate the bulk start timer. */ ++ init_timer(&bulk_start_timer); ++ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; ++ bulk_start_timer.function = tc_bulk_start_timer_func; ++ add_timer(&bulk_start_timer); ++ ++ ++ /* Initiate the bulk eot timer. */ ++ init_timer(&bulk_eot_timer); ++ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; ++ bulk_eot_timer.function = tc_bulk_eot_timer_func; ++ bulk_eot_timer.data = (unsigned long)hcd; ++ add_timer(&bulk_eot_timer); ++ ++ return 0; ++} ++ ++/* Uninitialize all resources used by Transfer Controller */ ++void tc_destroy(void) { ++ ++ /* Destroy all slab cache */ ++ kmem_cache_destroy(usb_desc_cache); ++ kmem_cache_destroy(isoc_compl_cache); ++ kmem_cache_destroy(later_data_cache); ++ ++ /* Remove timers */ ++ del_timer(&bulk_start_timer); ++ del_timer(&bulk_eot_timer); ++} ++ ++static void restart_dma8_sub0(void) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags); ++ /* Verify that the dma is not running */ ++ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) { ++ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP); ++ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) { ++ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next); ++ } ++ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID. ++ * ep->next is already a physical address; no need for a virt_to_phys. */ ++ *R_DMA_CH8_SUB0_EP = ep->next; ++ /* Restart the DMA */ ++ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); ++ } ++ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags); ++} ++ ++/* queue an URB with the transfer controller (called from hcd_driver) */ ++static int tc_urb_enqueue(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep, ++ struct urb *urb, ++ gfp_t mem_flags) { ++ int epid; ++ int retval; ++ int bustime = 0; ++ int maxpacket; ++ unsigned long flags; ++ struct crisv10_urb_priv *urb_priv; ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ DBFENTER; ++ ++ if(!(crisv10_hcd->running)) { ++ /* The USB Controller is not running, probably because no device is ++ attached. No idea to enqueue URBs then */ ++ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n", ++ (unsigned int)urb); ++ return -ENOENT; ++ } ++ ++ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); ++ /* Special case check for In Isoc transfers. Specification states that each ++ In Isoc transfer consists of one packet and therefore it should fit into ++ the transfer-buffer of an URB. ++ We do the check here to be sure (an invalid scenario can be produced with ++ parameters to the usbtest suite) */ ++ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) && ++ (urb->transfer_buffer_length < maxpacket)) { ++ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket); ++ return -EMSGSIZE; ++ } ++ ++ /* Check if there is enough bandwidth for periodic transfer */ ++ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) { ++ /* only check (and later claim) if not already claimed */ ++ if (urb->bandwidth == 0) { ++ bustime = usb_check_bandwidth(urb->dev, urb); ++ if (bustime < 0) { ++ tc_err("Not enough periodic bandwidth\n"); ++ return -ENOSPC; ++ } ++ } ++ } ++ ++ /* Check if there is a epid for URBs destination, if not this function ++ set up one. */ ++ epid = tc_setup_epid(ep, urb, mem_flags); ++ if (epid < 0) { ++ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb); ++ DBFEXIT; ++ return -ENOMEM; ++ } ++ ++ if(urb == activeUrbList[epid]) { ++ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb); ++ return -ENXIO; ++ } ++ ++ if(urb_list_entry(urb, epid)) { ++ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb); ++ return -ENXIO; ++ } ++ ++ /* If we actively have flaged endpoint as disabled then refuse submition */ ++ if(epid_state[epid].disabled) { ++ return -ENOENT; ++ } ++ ++ /* Allocate and init HC-private data for URB */ ++ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) { ++ DBFEXIT; ++ return -ENOMEM; ++ } ++ urb_priv = urb->hcpriv; ++ ++ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n", ++ (unsigned int)urb, urb_priv->urb_num, epid, ++ pipe_to_str(urb->pipe), urb->transfer_buffer_length); ++ ++ /* Create and link SBs required for this URB */ ++ retval = create_sb_for_urb(urb, mem_flags); ++ if(retval != 0) { ++ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb, ++ urb_priv->urb_num); ++ urb_priv_free(hcd, urb); ++ DBFEXIT; ++ return retval; ++ } ++ ++ /* Init intr EP pool if this URB is a INTR transfer. This pool is later ++ used when inserting EPs in the TxIntrEPList. We do the alloc here ++ so we can't run out of memory later */ ++ if(usb_pipeint(urb->pipe)) { ++ retval = init_intr_urb(urb, mem_flags); ++ if(retval != 0) { ++ tc_warn("Failed to init Intr URB\n"); ++ urb_priv_free(hcd, urb); ++ DBFEXIT; ++ return retval; ++ } ++ } ++ ++ /* Disable other access when inserting USB */ ++ local_irq_save(flags); ++ ++ /* Claim bandwidth, if needed */ ++ if(bustime) { ++ usb_claim_bandwidth(urb->dev, urb, bustime, 0); ++ } ++ ++ /* Add URB to EP queue */ ++ urb_list_add(urb, epid, mem_flags); ++ ++ if(usb_pipeisoc(urb->pipe)) { ++ /* Special processing of Isoc URBs. */ ++ tc_dma_process_isoc_urb(urb); ++ } else { ++ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ ++ tc_dma_process_queue(epid); ++ } ++ ++ local_irq_restore(flags); ++ ++ DBFEXIT; ++ return 0; ++} ++ ++/* remove an URB from the transfer controller queues (called from hcd_driver)*/ ++static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { ++ struct crisv10_urb_priv *urb_priv; ++ unsigned long flags; ++ int epid; ++ ++ DBFENTER; ++ /* Disable interrupts here since a descriptor interrupt for the isoc epid ++ will modify the sb list. This could possibly be done more granular, but ++ urb_dequeue should not be used frequently anyway. ++ */ ++ local_irq_save(flags); ++ ++ urb_priv = urb->hcpriv; ++ ++ if (!urb_priv) { ++ /* This happens if a device driver calls unlink on an urb that ++ was never submitted (lazy driver) or if the urb was completed ++ while dequeue was being called. */ ++ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb); ++ local_irq_restore(flags); ++ return 0; ++ } ++ epid = urb_priv->epid; ++ ++ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", ++ (urb == activeUrbList[epid]) ? "active" : "queued", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), epid, urb->status, ++ (urb_priv->later_data) ? "later-sched" : ""); ++ ++ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB ++ that isn't active can be dequeued by just removing it from the queue */ ++ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) || ++ usb_pipeint(urb->pipe)) { ++ ++ /* Check if URB haven't gone further than the queue */ ++ if(urb != activeUrbList[epid]) { ++ ASSERT(urb_priv->later_data == NULL); ++ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue" ++ " (not active)\n", (unsigned int)urb, urb_priv->urb_num, ++ str_dir(urb->pipe), str_type(urb->pipe), epid); ++ ++ /* Finish the URB with error status from USB core */ ++ tc_finish_urb(hcd, urb, urb->status); ++ local_irq_restore(flags); ++ return 0; ++ } ++ } ++ ++ /* Set URB status to Unlink for handling when interrupt comes. */ ++ urb_priv->urb_state = UNLINK; ++ ++ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */ ++ switch(usb_pipetype(urb->pipe)) { ++ case PIPE_BULK: ++ /* Check if EP still is enabled */ ++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ /* Kicking dummy list out of the party. */ ++ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); ++ break; ++ case PIPE_CONTROL: ++ /* Check if EP still is enabled */ ++ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ break; ++ case PIPE_ISOCHRONOUS: ++ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in ++ finish_isoc_urb(). Because there might the case when URB is dequeued ++ but there are other valid URBs waiting */ ++ ++ /* Check if In Isoc EP still is enabled */ ++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ break; ++ case PIPE_INTERRUPT: ++ /* Special care is taken for interrupt URBs. EPs are unlinked in ++ tc_finish_urb */ ++ break; ++ default: ++ break; ++ } ++ ++ /* Asynchronous unlink, finish the URB later from scheduled or other ++ event (data finished, error) */ ++ tc_finish_urb_later(hcd, urb, urb->status); ++ ++ local_irq_restore(flags); ++ DBFEXIT; ++ return 0; ++} ++ ++ ++static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) { ++ volatile int timeout = 10000; ++ struct urb* urb; ++ struct crisv10_urb_priv* urb_priv; ++ unsigned long flags; ++ ++ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ ++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ ++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ ++ ++ int type = epid_state[epid].type; ++ ++ /* Setting this flag will cause enqueue() to return -ENOENT for new ++ submitions on this endpoint and finish_urb() wont process queue further */ ++ epid_state[epid].disabled = 1; ++ ++ switch(type) { ++ case PIPE_BULK: ++ /* Check if EP still is enabled */ ++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); ++ ++ /* Do busy-wait until DMA not using this EP descriptor anymore */ ++ while((*R_DMA_CH8_SUB0_EP == ++ virt_to_phys(&TxBulkEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for" ++ " epid:%d\n", epid); ++ } ++ } ++ break; ++ ++ case PIPE_CONTROL: ++ /* Check if EP still is enabled */ ++ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); ++ ++ /* Do busy-wait until DMA not using this EP descriptor anymore */ ++ while((*R_DMA_CH8_SUB1_EP == ++ virt_to_phys(&TxCtrlEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for" ++ " epid:%d\n", epid); ++ } ++ } ++ break; ++ ++ case PIPE_INTERRUPT: ++ local_irq_save(flags); ++ /* Disable all Intr EPs belonging to epid */ ++ first_ep = &TxIntrEPList[0]; ++ curr_ep = first_ep; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { ++ /* Disable EP */ ++ next_ep->command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != first_ep); ++ ++ local_irq_restore(flags); ++ break; ++ ++ case PIPE_ISOCHRONOUS: ++ /* Check if EP still is enabled */ ++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid); ++ /* The EP was enabled, disable it. */ ++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ ++ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for" ++ " epid:%d\n", epid); ++ } ++ } ++ break; ++ } ++ ++ local_irq_save(flags); ++ ++ /* Finish if there is active URB for this endpoint */ ++ if(activeUrbList[epid] != NULL) { ++ urb = activeUrbList[epid]; ++ urb_priv = urb->hcpriv; ++ ASSERT(urb_priv); ++ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", ++ (urb == activeUrbList[epid]) ? "active" : "queued", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), epid, urb->status, ++ (urb_priv->later_data) ? "later-sched" : ""); ++ ++ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT); ++ ASSERT(activeUrbList[epid] == NULL); ++ } ++ ++ /* Finish any queued URBs for this endpoint. There won't be any resubmitions ++ because epid_disabled causes enqueue() to fail for this endpoint */ ++ while((urb = urb_list_first(epid)) != NULL) { ++ urb_priv = urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", ++ (urb == activeUrbList[epid]) ? "active" : "queued", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), epid, urb->status, ++ (urb_priv->later_data) ? "later-sched" : ""); ++ ++ tc_finish_urb(hcd, urb, -ENOENT); ++ } ++ epid_state[epid].disabled = 0; ++ local_irq_restore(flags); ++} ++ ++/* free resources associated with an endpoint (called from hcd_driver) */ ++static void tc_endpoint_disable(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep) { ++ DBFENTER; ++ /* Only free epid if it has been allocated. We get two endpoint_disable ++ requests for ctrl endpoints so ignore the second one */ ++ if(ep->hcpriv != NULL) { ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ int epid = ep_priv->epid; ++ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n", ++ (unsigned int)ep, (unsigned int)ep->hcpriv, ++ endpoint_to_str(&(ep->desc)), epid); ++ ++ tc_sync_finish_epid(hcd, epid); ++ ++ ASSERT(activeUrbList[epid] == NULL); ++ ASSERT(list_empty(&urb_list[epid])); ++ ++ tc_free_epid(ep); ++ } else { ++ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep, ++ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc))); ++ } ++ DBFEXIT; ++} ++ ++static void tc_finish_urb_later_proc(void *data) { ++ unsigned long flags; ++ struct urb_later_data* uld = (struct urb_later_data*)data; ++ local_irq_save(flags); ++ if(uld->urb == NULL) { ++ late_dbg("Later finish of URB = NULL (allready finished)\n"); ++ } else { ++ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv; ++ ASSERT(urb_priv); ++ if(urb_priv->urb_num == uld->urb_num) { ++ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb), ++ urb_priv->urb_num); ++ if(uld->status != uld->urb->status) { ++ errno_dbg("Later-finish URB with status:%d, later-status:%d\n", ++ uld->urb->status, uld->status); ++ } ++ if(uld != urb_priv->later_data) { ++ panic("Scheduled uld not same as URBs uld\n"); ++ } ++ tc_finish_urb(uld->hcd, uld->urb, uld->status); ++ } else { ++ late_warn("Ignoring later finish of URB:0x%x[%d]" ++ ", urb_num doesn't match current URB:0x%x[%d]", ++ (unsigned int)(uld->urb), uld->urb_num, ++ (unsigned int)(uld->urb), urb_priv->urb_num); ++ } ++ } ++ local_irq_restore(flags); ++ kmem_cache_free(later_data_cache, uld); ++} ++ ++static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, ++ int status) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ struct urb_later_data* uld; ++ ++ ASSERT(urb_priv); ++ ++ if(urb_priv->later_data != NULL) { ++ /* Later-finish allready scheduled for this URB, just update status to ++ return when finishing later */ ++ errno_dbg("Later-finish schedule change URB status:%d with new" ++ " status:%d\n", urb_priv->later_data->status, status); ++ ++ urb_priv->later_data->status = status; ++ return; ++ } ++ ++ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC); ++ ASSERT(uld); ++ ++ uld->hcd = hcd; ++ uld->urb = urb; ++ uld->urb_num = urb_priv->urb_num; ++ uld->status = status; ++ ++ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld); ++ urb_priv->later_data = uld; ++ ++ /* Schedule the finishing of the URB to happen later */ ++ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY); ++} ++ ++static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, ++ int status); ++ ++static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) { ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ int epid; ++ char toggle; ++ int urb_num; ++ ++ DBFENTER; ++ ASSERT(urb_priv != NULL); ++ epid = urb_priv->epid; ++ urb_num = urb_priv->urb_num; ++ ++ if(urb != activeUrbList[epid]) { ++ if(urb_list_entry(urb, epid)) { ++ /* Remove this URB from the list. Only happens when URB are finished ++ before having been processed (dequeing) */ ++ urb_list_del(urb, epid); ++ } else { ++ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for" ++ " epid:%d\n", (unsigned int)urb, urb_num, epid); ++ } ++ } ++ ++ /* Cancel any pending later-finish of this URB */ ++ if(urb_priv->later_data) { ++ urb_priv->later_data->urb = NULL; ++ } ++ ++ /* For an IN pipe, we always set the actual length, regardless of whether ++ there was an error or not (which means the device driver can use the data ++ if it wants to). */ ++ if(usb_pipein(urb->pipe)) { ++ urb->actual_length = urb_priv->rx_offset; ++ } else { ++ /* Set actual_length for OUT urbs also; the USB mass storage driver seems ++ to want that. */ ++ if (status == 0 && urb->status == -EINPROGRESS) { ++ urb->actual_length = urb->transfer_buffer_length; ++ } else { ++ /* We wouldn't know of any partial writes if there was an error. */ ++ urb->actual_length = 0; ++ } ++ } ++ ++ ++ /* URB status mangling */ ++ if(urb->status == -EINPROGRESS) { ++ /* The USB core hasn't changed the status, let's set our finish status */ ++ urb->status = status; ++ ++ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) && ++ usb_pipein(urb->pipe) && ++ (urb->actual_length != urb->transfer_buffer_length)) { ++ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's ++ max length) is to be treated as an error. */ ++ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short" ++ " data:%d\n", (unsigned int)urb, urb_num, ++ urb->actual_length); ++ urb->status = -EREMOTEIO; ++ } ++ ++ if(urb_priv->urb_state == UNLINK) { ++ /* URB has been requested to be unlinked asynchronously */ ++ urb->status = -ECONNRESET; ++ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n", ++ (unsigned int)urb, urb_num, urb->status); ++ } ++ } else { ++ /* The USB Core wants to signal some error via the URB, pass it through */ ++ } ++ ++ /* use completely different finish function for Isoc URBs */ ++ if(usb_pipeisoc(urb->pipe)) { ++ tc_finish_isoc_urb(hcd, urb, status); ++ return; ++ } ++ ++ /* Do special unlinking of EPs for Intr traffic */ ++ if(usb_pipeint(urb->pipe)) { ++ tc_dma_unlink_intr_urb(urb); ++ } ++ ++ /* Release allocated bandwidth for periodic transfers */ ++ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) ++ usb_release_bandwidth(urb->dev, urb, 0); ++ ++ /* This URB is active on EP */ ++ if(urb == activeUrbList[epid]) { ++ /* We need to fiddle with the toggle bits because the hardware doesn't do ++ it for us. */ ++ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe)); ++ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), ++ usb_pipeout(urb->pipe), toggle); ++ ++ /* Checks for Ctrl and Bulk EPs */ ++ switch(usb_pipetype(urb->pipe)) { ++ case PIPE_BULK: ++ /* Check so Bulk EP realy is disabled before finishing active URB */ ++ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) == ++ IO_STATE(USB_EP_command, enable, no)); ++ /* Disable sub-pointer for EP to avoid next tx_interrupt() to ++ process Bulk EP. */ ++ TxBulkEPList[epid].sub = 0; ++ /* No need to wait for the DMA before changing the next pointer. ++ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use ++ the last one (INVALID_EPID) for actual traffic. */ ++ TxBulkEPList[epid].next = ++ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); ++ break; ++ case PIPE_CONTROL: ++ /* Check so Ctrl EP realy is disabled before finishing active URB */ ++ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) == ++ IO_STATE(USB_EP_command, enable, no)); ++ /* Disable sub-pointer for EP to avoid next tx_interrupt() to ++ process Ctrl EP. */ ++ TxCtrlEPList[epid].sub = 0; ++ break; ++ } ++ } ++ ++ /* Free HC-private URB data*/ ++ urb_priv_free(hcd, urb); ++ ++ if(urb->status) { ++ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", ++ (unsigned int)urb, urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb->actual_length, urb->status); ++ } else { ++ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", ++ (unsigned int)urb, urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb->actual_length, urb->status); ++ } ++ ++ /* If we just finished an active URB, clear active pointer. */ ++ if (urb == activeUrbList[epid]) { ++ /* Make URB not active on EP anymore */ ++ activeUrbList[epid] = NULL; ++ ++ if(urb->status == 0) { ++ /* URB finished sucessfully, process queue to see if there are any more ++ URBs waiting before we call completion function.*/ ++ if(crisv10_hcd->running) { ++ /* Only process queue if USB controller is running */ ++ tc_dma_process_queue(epid); ++ } else { ++ tc_warn("No processing of queue for epid:%d, USB Controller not" ++ " running\n", epid); ++ } ++ } ++ } ++ ++ /* Hand the URB from HCD to its USB device driver, using its completion ++ functions */ ++ usb_hcd_giveback_urb (hcd, urb); ++ ++ /* Check the queue once more if the URB returned with error, because we ++ didn't do it before the completion function because the specification ++ states that the queue should not restart until all it's unlinked ++ URBs have been fully retired, with the completion functions run */ ++ if(crisv10_hcd->running) { ++ /* Only process queue if USB controller is running */ ++ tc_dma_process_queue(epid); ++ } else { ++ tc_warn("No processing of queue for epid:%d, USB Controller not running\n", ++ epid); ++ } ++ ++ DBFEXIT; ++} ++ ++static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, ++ int status) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ int epid, i; ++ volatile int timeout = 10000; ++ ++ ASSERT(urb_priv); ++ epid = urb_priv->epid; ++ ++ ASSERT(usb_pipeisoc(urb->pipe)); ++ ++ /* Set that all isoc packets have status and length set before ++ completing the urb. */ ++ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){ ++ urb->iso_frame_desc[i].actual_length = 0; ++ urb->iso_frame_desc[i].status = -EPROTO; ++ } ++ ++ /* Check if the URB is currently active (done or error) */ ++ if(urb == activeUrbList[epid]) { ++ /* Check if there are another In Isoc URB queued for this epid */ ++ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) { ++ /* Move it from queue to active and mark it started so Isoc transfers ++ won't be interrupted. ++ All Isoc URBs data transfers are already added to DMA lists so we ++ don't have to insert anything in DMA lists here. */ ++ activeUrbList[epid] = urb_list_first(epid); ++ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state = ++ STARTED; ++ urb_list_del(activeUrbList[epid], epid); ++ ++ if(urb->status) { ++ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" ++ " status:%d, new waiting URB:0x%x[%d]\n", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb_priv->isoc_packet_counter, ++ urb->number_of_packets, urb->status, ++ (unsigned int)activeUrbList[epid], ++ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num); ++ } ++ ++ } else { /* No other URB queued for this epid */ ++ if(urb->status) { ++ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" ++ " status:%d, no new URB waiting\n", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb_priv->isoc_packet_counter, ++ urb->number_of_packets, urb->status); ++ } ++ ++ /* Check if EP is still enabled, then shut it down. */ ++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid); ++ ++ /* Should only occur for In Isoc EPs where SB isn't consumed. */ ++ ASSERT(usb_pipein(urb->pipe)); ++ ++ /* Disable it and wait for it to stop */ ++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ ++ /* Ah, the luxury of busy-wait. */ ++ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid); ++ } ++ } ++ ++ /* Unlink SB to say that epid is finished. */ ++ TxIsocEPList[epid].sub = 0; ++ TxIsocEPList[epid].hw_len = 0; ++ ++ /* No URB active for EP anymore */ ++ activeUrbList[epid] = NULL; ++ } ++ } else { /* Finishing of not active URB (queued up with SBs thought) */ ++ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d," ++ " SB queued but not active\n", ++ (unsigned int)urb, str_dir(urb->pipe), ++ urb_priv->isoc_packet_counter, urb->number_of_packets, ++ urb->status); ++ if(usb_pipeout(urb->pipe)) { ++ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */ ++ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb; ++ ++ iter_sb = TxIsocEPList[epid].sub ? ++ phys_to_virt(TxIsocEPList[epid].sub) : 0; ++ prev_sb = 0; ++ ++ /* SB that is linked before this URBs first SB */ ++ while (iter_sb && (iter_sb != urb_priv->first_sb)) { ++ prev_sb = iter_sb; ++ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; ++ } ++ ++ if (iter_sb == 0) { ++ /* Unlink of the URB currently being transmitted. */ ++ prev_sb = 0; ++ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; ++ } ++ ++ while (iter_sb && (iter_sb != urb_priv->last_sb)) { ++ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; ++ } ++ ++ if (iter_sb) { ++ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; ++ } else { ++ /* This should only happen if the DMA has completed ++ processing the SB list for this EP while interrupts ++ are disabled. */ ++ isoc_dbg("Isoc urb not found, already sent?\n"); ++ next_sb = 0; ++ } ++ if (prev_sb) { ++ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; ++ } else { ++ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; ++ } ++ } ++ } ++ ++ /* Free HC-private URB data*/ ++ urb_priv_free(hcd, urb); ++ ++ usb_release_bandwidth(urb->dev, urb, 0); ++ ++ /* Hand the URB from HCD to its USB device driver, using its completion ++ functions */ ++ usb_hcd_giveback_urb (hcd, urb); ++} ++ ++static __u32 urb_num = 0; ++ ++/* allocate and initialize URB private data */ ++static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, ++ int mem_flags) { ++ struct crisv10_urb_priv *urb_priv; ++ ++ urb_priv = kmalloc(sizeof *urb_priv, mem_flags); ++ if (!urb_priv) ++ return -ENOMEM; ++ memset(urb_priv, 0, sizeof *urb_priv); ++ ++ urb_priv->epid = epid; ++ urb_priv->urb_state = NOT_STARTED; ++ ++ urb->hcpriv = urb_priv; ++ /* Assign URB a sequence number, and increment counter */ ++ urb_priv->urb_num = urb_num; ++ urb_num++; ++ return 0; ++} ++ ++/* free URB private data */ ++static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) { ++ int i; ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ ASSERT(urb_priv != 0); ++ ++ /* Check it has any SBs linked that needs to be freed*/ ++ if(urb_priv->first_sb != NULL) { ++ struct USB_SB_Desc *next_sb, *first_sb, *last_sb; ++ int i = 0; ++ first_sb = urb_priv->first_sb; ++ last_sb = urb_priv->last_sb; ++ ASSERT(last_sb); ++ while(first_sb != last_sb) { ++ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next); ++ kmem_cache_free(usb_desc_cache, first_sb); ++ first_sb = next_sb; ++ i++; ++ } ++ kmem_cache_free(usb_desc_cache, last_sb); ++ i++; ++ } ++ ++ /* Check if it has any EPs in its Intr pool that also needs to be freed */ ++ if(urb_priv->intr_ep_pool_length > 0) { ++ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) { ++ kfree(urb_priv->intr_ep_pool[i]); ++ } ++ /* ++ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n", ++ urb_priv->intr_ep_pool_length, (unsigned int)urb); ++ */ ++ } ++ ++ kfree(urb_priv); ++ urb->hcpriv = NULL; ++} ++ ++static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) { ++ struct crisv10_ep_priv *ep_priv; ++ ++ ep_priv = kmalloc(sizeof *ep_priv, mem_flags); ++ if (!ep_priv) ++ return -ENOMEM; ++ memset(ep_priv, 0, sizeof *ep_priv); ++ ++ ep->hcpriv = ep_priv; ++ return 0; ++} ++ ++static void ep_priv_free(struct usb_host_endpoint *ep) { ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ ASSERT(ep_priv); ++ kfree(ep_priv); ++ ep->hcpriv = NULL; ++} ++ ++/* EPID handling functions, managing EP-list in Etrax through wrappers */ ++/* ------------------------------------------------------------------- */ ++ ++/* Sets up a new EPID for an endpoint or returns existing if found */ ++static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, ++ int mem_flags) { ++ int epid; ++ char devnum, endpoint, out_traffic, slow; ++ int maxlen; ++ __u32 epid_data; ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ ++ DBFENTER; ++ ++ /* Check if a valid epid already is setup for this endpoint */ ++ if(ep_priv != NULL) { ++ return ep_priv->epid; ++ } ++ ++ /* We must find and initiate a new epid for this urb. */ ++ epid = tc_allocate_epid(); ++ ++ if (epid == -1) { ++ /* Failed to allocate a new epid. */ ++ DBFEXIT; ++ return epid; ++ } ++ ++ /* We now have a new epid to use. Claim it. */ ++ epid_state[epid].inuse = 1; ++ ++ /* Init private data for new endpoint */ ++ if(ep_priv_create(ep, mem_flags) != 0) { ++ return -ENOMEM; ++ } ++ ep_priv = ep->hcpriv; ++ ep_priv->epid = epid; ++ ++ devnum = usb_pipedevice(urb->pipe); ++ endpoint = usb_pipeendpoint(urb->pipe); ++ slow = (urb->dev->speed == USB_SPEED_LOW); ++ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); ++ ++ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { ++ /* We want both IN and OUT control traffic to be put on the same ++ EP/SB list. */ ++ out_traffic = 1; ++ } else { ++ out_traffic = usb_pipeout(urb->pipe); ++ } ++ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | ++ /* FIXME: Change any to the actual port? */ ++ IO_STATE(R_USB_EPT_DATA_ISO, port, any) | ++ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | ++ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | ++ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); ++ etrax_epid_iso_set(epid, epid_data); ++ } else { ++ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) | ++ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | ++ /* FIXME: Change any to the actual port? */ ++ IO_STATE(R_USB_EPT_DATA, port, any) | ++ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | ++ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | ++ IO_FIELD(R_USB_EPT_DATA, dev, devnum); ++ etrax_epid_set(epid, epid_data); ++ } ++ ++ epid_state[epid].out_traffic = out_traffic; ++ epid_state[epid].type = usb_pipetype(urb->pipe); ++ ++ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n", ++ (unsigned int)ep, epid, devnum, endpoint, maxlen, ++ str_type(urb->pipe), out_traffic ? "out" : "in", ++ slow ? "low" : "full"); ++ ++ /* Enable Isoc eof interrupt if we set up the first Isoc epid */ ++ if(usb_pipeisoc(urb->pipe)) { ++ isoc_epid_counter++; ++ if(isoc_epid_counter == 1) { ++ isoc_warn("Enabled Isoc eof interrupt\n"); ++ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); ++ } ++ } ++ ++ DBFEXIT; ++ return epid; ++} ++ ++static void tc_free_epid(struct usb_host_endpoint *ep) { ++ unsigned long flags; ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ int epid; ++ volatile int timeout = 10000; ++ ++ DBFENTER; ++ ++ if (ep_priv == NULL) { ++ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep); ++ DBFEXIT; ++ return; ++ } ++ ++ epid = ep_priv->epid; ++ ++ /* Disable Isoc eof interrupt if we free the last Isoc epid */ ++ if(epid_isoc(epid)) { ++ ASSERT(isoc_epid_counter > 0); ++ isoc_epid_counter--; ++ if(isoc_epid_counter == 0) { ++ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); ++ isoc_warn("Disabled Isoc eof interrupt\n"); ++ } ++ } ++ ++ /* Take lock manualy instead of in epid_x_x wrappers, ++ because we need to be polling here */ ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); ++ nop(); ++ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for epid:%d to drop hold\n", epid); ++ } ++ /* This will, among other things, set the valid field to 0. */ ++ *R_USB_EPT_DATA = 0; ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++ ++ /* Free resource in software state info list */ ++ epid_state[epid].inuse = 0; ++ ++ /* Free private endpoint data */ ++ ep_priv_free(ep); ++ ++ DBFEXIT; ++} ++ ++static int tc_allocate_epid(void) { ++ int i; ++ DBFENTER; ++ for (i = 0; i < NBR_OF_EPIDS; i++) { ++ if (!epid_inuse(i)) { ++ DBFEXIT; ++ return i; ++ } ++ } ++ ++ tc_warn("Found no free epids\n"); ++ DBFEXIT; ++ return -1; + } + + +-static void init_tx_intr_ep(void) +-{ +- int i; ++/* Wrappers around the list functions (include/linux/list.h). */ ++/* ---------------------------------------------------------- */ ++static inline int __urb_list_empty(int epid) { ++ int retval; ++ retval = list_empty(&urb_list[epid]); ++ return retval; ++} + +- DBFENTER; ++/* Returns first urb for this epid, or NULL if list is empty. */ ++static inline struct urb *urb_list_first(int epid) { ++ unsigned long flags; ++ struct urb *first_urb = 0; ++ spin_lock_irqsave(&urb_list_lock, flags); ++ if (!__urb_list_empty(epid)) { ++ /* Get the first urb (i.e. head->next). */ ++ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); ++ first_urb = urb_entry->urb; ++ } ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return first_urb; ++} + +- /* Read comment at zout_buffer declaration for an explanation to this. */ +- TxIntrSB_zout.sw_len = 1; +- TxIntrSB_zout.next = 0; +- TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); +- TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, zout) | +- IO_STATE(USB_SB_command, full, yes) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { +- CHECK_ALIGN(&TxIntrEPList[i]); +- TxIntrEPList[i].hw_len = 0; +- TxIntrEPList[i].command = +- (IO_STATE(USB_EP_command, eof, yes) | +- IO_STATE(USB_EP_command, enable, yes) | +- IO_FIELD(USB_EP_command, epid, INVALID_EPID)); +- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); +- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); +- } ++/* Adds an urb_entry last in the list for this epid. */ ++static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) { ++ unsigned long flags; ++ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags); ++ ASSERT(urb_entry); ++ ++ urb_entry->urb = urb; ++ spin_lock_irqsave(&urb_list_lock, flags); ++ list_add_tail(&urb_entry->list, &urb_list[epid]); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++} + +- CHECK_ALIGN(&TxIntrEPList[i]); +- TxIntrEPList[i].hw_len = 0; +- TxIntrEPList[i].command = +- (IO_STATE(USB_EP_command, eof, yes) | +- IO_STATE(USB_EP_command, eol, yes) | +- IO_STATE(USB_EP_command, enable, yes) | +- IO_FIELD(USB_EP_command, epid, INVALID_EPID)); +- TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); +- TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); +- +- *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); +- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); +- DBFEXIT; ++/* Search through the list for an element that contains this urb. (The list ++ is expected to be short and the one we are about to delete will often be ++ the first in the list.) ++ Should be protected by spin_locks in calling function */ ++static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { ++ struct list_head *entry; ++ struct list_head *tmp; ++ urb_entry_t *urb_entry; ++ ++ list_for_each_safe(entry, tmp, &urb_list[epid]) { ++ urb_entry = list_entry(entry, urb_entry_t, list); ++ ASSERT(urb_entry); ++ ASSERT(urb_entry->urb); ++ ++ if (urb_entry->urb == urb) { ++ return urb_entry; ++ } ++ } ++ return 0; ++} ++ ++/* Same function as above but for global use. Protects list by spinlock */ ++static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return (urb_entry); + } + +-static void init_tx_isoc_ep(void) +-{ +- int i; ++/* Delete an urb from the list. */ ++static inline void urb_list_del(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ ++ /* Delete entry and free. */ ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ ASSERT(urb_entry); ++ ++ list_del(&urb_entry->list); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ kfree(urb_entry); ++} + +- DBFENTER; ++/* Move an urb to the end of the list. */ ++static inline void urb_list_move_last(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ ASSERT(urb_entry); ++ ++ list_del(&urb_entry->list); ++ list_add_tail(&urb_entry->list, &urb_list[epid]); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++} + +- /* Read comment at zout_buffer declaration for an explanation to this. */ +- TxIsocSB_zout.sw_len = 1; +- TxIsocSB_zout.next = 0; +- TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); +- TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, zout) | +- IO_STATE(USB_SB_command, full, yes) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- /* The last isochronous EP descriptor is a dummy. */ +- +- for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { +- CHECK_ALIGN(&TxIsocEPList[i]); +- TxIsocEPList[i].hw_len = 0; +- TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); +- TxIsocEPList[i].sub = 0; +- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); ++/* Get the next urb in the list. */ ++static inline struct urb *urb_list_next(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ ASSERT(urb_entry); ++ ++ if (urb_entry->list.next != &urb_list[epid]) { ++ struct list_head *elem = urb_entry->list.next; ++ urb_entry = list_entry(elem, urb_entry_t, list); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return urb_entry->urb; ++ } else { ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return NULL; ++ } ++} ++ ++struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc, ++ int mem_flags) { ++ struct USB_EP_Desc *ep_desc; ++ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags); ++ if(ep_desc == NULL) ++ return NULL; ++ memset(ep_desc, 0, sizeof(struct USB_EP_Desc)); ++ ++ ep_desc->hw_len = 0; ++ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | ++ IO_STATE(USB_EP_command, enable, yes)); ++ if(sb_desc == NULL) { ++ ep_desc->sub = 0; ++ } else { ++ ep_desc->sub = virt_to_phys(sb_desc); ++ } ++ return ep_desc; ++} ++ ++#define TT_ZOUT 0 ++#define TT_IN 1 ++#define TT_OUT 2 ++#define TT_SETUP 3 ++ ++#define CMD_EOL IO_STATE(USB_SB_command, eol, yes) ++#define CMD_INTR IO_STATE(USB_SB_command, intr, yes) ++#define CMD_FULL IO_STATE(USB_SB_command, full, yes) ++ ++/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT ++ SBs. Also used by create_sb_in() to avoid same allocation procedure at two ++ places */ ++struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data, ++ int datalen, int mem_flags) { ++ struct USB_SB_Desc *sb_desc; ++ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); ++ if(sb_desc == NULL) ++ return NULL; ++ memset(sb_desc, 0, sizeof(struct USB_SB_Desc)); ++ ++ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) | ++ IO_STATE(USB_SB_command, eot, yes); ++ ++ sb_desc->sw_len = datalen; ++ if(data != NULL) { ++ sb_desc->buf = virt_to_phys(data); ++ } else { ++ sb_desc->buf = 0; ++ } ++ if(sb_prev != NULL) { ++ sb_prev->next = virt_to_phys(sb_desc); ++ } ++ return sb_desc; ++} ++ ++/* Creates a copy of an existing SB by allocation space for it and copy ++ settings */ ++struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) { ++ struct USB_SB_Desc *sb_desc; ++ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); ++ if(sb_desc == NULL) ++ return NULL; ++ ++ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc)); ++ return sb_desc; ++} ++ ++/* A specific create_sb function for creation of in SBs. This is due to ++ that datalen in In SBs shows how many packets we are expecting. It also ++ sets up the rem field to show if how many bytes we expect in last packet ++ if it's not a full one */ ++struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen, ++ int maxlen, int mem_flags) { ++ struct USB_SB_Desc *sb_desc; ++ sb_desc = create_sb(sb_prev, TT_IN, NULL, ++ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags); ++ if(sb_desc == NULL) ++ return NULL; ++ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen); ++ return sb_desc; ++} ++ ++void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) { ++ sb_desc->command |= flags; ++} ++ ++int create_sb_for_urb(struct urb *urb, int mem_flags) { ++ int is_out = !usb_pipein(urb->pipe); ++ int type = usb_pipetype(urb->pipe); ++ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out); ++ int buf_len = urb->transfer_buffer_length; ++ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL; ++ struct USB_SB_Desc *sb_desc = NULL; ++ ++ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv != NULL); ++ ++ switch(type) { ++ case PIPE_CONTROL: ++ /* Setup stage */ ++ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ set_sb_cmds(sb_desc, CMD_FULL); ++ ++ /* Attach first SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ ++ if (is_out) { /* Out Control URB */ ++ /* If this Control OUT transfer has an optional data stage we add ++ an OUT token before the mandatory IN (status) token */ ++ if ((buf_len > 0) && buf) { ++ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ ++ /* Status stage */ ++ /* The data length has to be exactly 1. This is due to a requirement ++ of the USB specification that a host must be prepared to receive ++ data in the status phase */ ++ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ } else { /* In control URB */ ++ /* Data stage */ ++ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ ++ /* Status stage */ ++ /* Read comment at zout_buffer declaration for an explanation to this. */ ++ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ /* Set descriptor interrupt flag for in URBs so we can finish URB after ++ zout-packet has been sent */ ++ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL); ++ } ++ /* Set end-of-list flag in last SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ /* Attach last SB to URB */ ++ urb_priv->last_sb = sb_desc; ++ break; ++ ++ case PIPE_BULK: ++ if (is_out) { /* Out Bulk URB */ ++ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ /* The full field is set to yes, even if we don't actually check that ++ this is a full-length transfer (i.e., that transfer_buffer_length % ++ maxlen = 0). ++ Setting full prevents the USB controller from sending an empty packet ++ in that case. However, if URB_ZERO_PACKET was set we want that. */ ++ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ } else { /* In Bulk URB */ ++ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ } ++ /* Set end-of-list flag for last SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ ++ /* Attach SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ urb_priv->last_sb = sb_desc; ++ break; ++ ++ case PIPE_INTERRUPT: ++ if(is_out) { /* Out Intr URB */ ++ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ ++ /* The full field is set to yes, even if we don't actually check that ++ this is a full-length transfer (i.e., that transfer_buffer_length % ++ maxlen = 0). ++ Setting full prevents the USB controller from sending an empty packet ++ in that case. However, if URB_ZERO_PACKET was set we want that. */ ++ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ /* Only generate TX interrupt if it's a Out URB*/ ++ set_sb_cmds(sb_desc, CMD_INTR); ++ ++ } else { /* In Intr URB */ ++ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ } ++ /* Set end-of-list flag for last SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ ++ /* Attach SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ urb_priv->last_sb = sb_desc; ++ ++ break; ++ case PIPE_ISOCHRONOUS: ++ if(is_out) { /* Out Isoc URB */ ++ int i; ++ if(urb->number_of_packets == 0) { ++ tc_err("Can't create SBs for Isoc URB with zero packets\n"); ++ return -EPIPE; ++ } ++ /* Create one SB descriptor for each packet and link them together. */ ++ for(i = 0; i < urb->number_of_packets; i++) { ++ if (urb->iso_frame_desc[i].length > 0) { ++ ++ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer + ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ ++ /* Check if it's a full length packet */ ++ if (urb->iso_frame_desc[i].length == ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ ++ } else { /* zero length packet */ ++ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ /* Attach first SB descriptor to URB */ ++ if (i == 0) { ++ urb_priv->first_sb = sb_desc; ++ } ++ } ++ /* Set interrupt and end-of-list flags in last SB */ ++ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL); ++ /* Attach last SB descriptor to URB */ ++ urb_priv->last_sb = sb_desc; ++ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n", ++ urb->number_of_packets, (unsigned int)urb); ++ } else { /* In Isoc URB */ ++ /* Actual number of packets is not relevant for periodic in traffic as ++ long as it is more than zero. Set to 1 always. */ ++ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ /* Set end-of-list flags for SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ ++ /* Attach SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ urb_priv->last_sb = sb_desc; ++ } ++ break; ++ default: ++ tc_err("Unknown pipe-type\n"); ++ return -EPIPE; ++ break; ++ } ++ return 0; ++} ++ ++int init_intr_urb(struct urb *urb, int mem_flags) { ++ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ struct USB_EP_Desc* ep_desc; ++ int interval; ++ int i; ++ int ep_count; ++ ++ ASSERT(urb_priv != NULL); ++ ASSERT(usb_pipeint(urb->pipe)); ++ /* We can't support interval longer than amount of eof descriptors in ++ TxIntrEPList */ ++ if(urb->interval > MAX_INTR_INTERVAL) { ++ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval, ++ MAX_INTR_INTERVAL); ++ return -EINVAL; ++ } ++ ++ /* We assume that the SB descriptors already have been setup */ ++ ASSERT(urb_priv->first_sb != NULL); ++ ++ /* Round of the interval to 2^n, it is obvious that this code favours ++ smaller numbers, but that is actually a good thing */ ++ /* FIXME: The "rounding error" for larger intervals will be quite ++ large. For in traffic this shouldn't be a problem since it will only ++ mean that we "poll" more often. */ ++ interval = urb->interval; ++ for (i = 0; interval; i++) { ++ interval = interval >> 1; ++ } ++ urb_priv->interval = 1 << (i - 1); ++ ++ /* We can only have max interval for Out Interrupt due to that we can only ++ handle one linked in EP for a certain epid in the Intr descr array at the ++ time. The USB Controller in the Etrax 100LX continues to process Intr EPs ++ so we have no way of knowing which one that caused the actual transfer if ++ we have several linked in. */ ++ if(usb_pipeout(urb->pipe)) { ++ urb_priv->interval = MAX_INTR_INTERVAL; ++ } ++ ++ /* Calculate amount of EPs needed */ ++ ep_count = MAX_INTR_INTERVAL / urb_priv->interval; ++ ++ for(i = 0; i < ep_count; i++) { ++ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags); ++ if(ep_desc == NULL) { ++ /* Free any descriptors that we may have allocated before failure */ ++ while(i > 0) { ++ i--; ++ kfree(urb_priv->intr_ep_pool[i]); ++ } ++ return -ENOMEM; ++ } ++ urb_priv->intr_ep_pool[i] = ep_desc; ++ } ++ urb_priv->intr_ep_pool_length = ep_count; ++ return 0; ++} ++ ++/* DMA RX/TX functions */ ++/* ----------------------- */ ++ ++static void tc_dma_init_rx_list(void) { ++ int i; ++ ++ /* Setup descriptor list except last one */ ++ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { ++ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; ++ RxDescList[i].command = 0; ++ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); ++ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); ++ RxDescList[i].hw_len = 0; ++ RxDescList[i].status = 0; ++ ++ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as ++ USB_IN_Desc for the relevant fields.) */ ++ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); ++ ++ } ++ /* Special handling of last descriptor */ ++ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; ++ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); ++ RxDescList[i].next = virt_to_phys(&RxDescList[0]); ++ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); ++ RxDescList[i].hw_len = 0; ++ RxDescList[i].status = 0; ++ ++ /* Setup list pointers that show progress in list */ ++ myNextRxDesc = &RxDescList[0]; ++ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; ++ ++ flush_etrax_cache(); ++ /* Point DMA to first descriptor in list and start it */ ++ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); ++ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); ++} ++ ++ ++static void tc_dma_init_tx_bulk_list(void) { ++ int i; ++ volatile struct USB_EP_Desc *epDescr; ++ ++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { ++ epDescr = &(TxBulkEPList[i]); ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]); ++ ++ /* Initiate two EPs, disabled and with the eol flag set. No need for any ++ preserved epid. */ ++ ++ /* The first one has the intr flag set so we get an interrupt when the DMA ++ channel is about to become disabled. */ ++ CHECK_ALIGN(&TxBulkDummyEPList[i][0]); ++ TxBulkDummyEPList[i][0].hw_len = 0; ++ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | ++ IO_STATE(USB_EP_command, eol, yes) | ++ IO_STATE(USB_EP_command, intr, yes)); ++ TxBulkDummyEPList[i][0].sub = 0; ++ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); ++ ++ /* The second one. */ ++ CHECK_ALIGN(&TxBulkDummyEPList[i][1]); ++ TxBulkDummyEPList[i][1].hw_len = 0; ++ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | ++ IO_STATE(USB_EP_command, eol, yes)); ++ TxBulkDummyEPList[i][1].sub = 0; ++ /* The last dummy's next pointer is the same as the current EP's next pointer. */ ++ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); ++ } ++ ++ /* Special handling of last descr in list, make list circular */ ++ epDescr = &TxBulkEPList[i]; ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | ++ IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxBulkEPList[0]); ++ ++ /* Init DMA sub-channel pointers to last item in each list */ ++ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); ++ /* No point in starting the bulk channel yet. ++ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ ++} ++ ++static void tc_dma_init_tx_ctrl_list(void) { ++ int i; ++ volatile struct USB_EP_Desc *epDescr; ++ ++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { ++ epDescr = &(TxCtrlEPList[i]); ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]); ++ } ++ /* Special handling of last descr in list, make list circular */ ++ epDescr = &TxCtrlEPList[i]; ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | ++ IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxCtrlEPList[0]); ++ ++ /* Init DMA sub-channel pointers to last item in each list */ ++ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]); ++ /* No point in starting the ctrl channel yet. ++ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ ++} ++ ++ ++static void tc_dma_init_tx_intr_list(void) { ++ int i; ++ ++ TxIntrSB_zout.sw_len = 1; ++ TxIntrSB_zout.next = 0; ++ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); ++ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | ++ IO_STATE(USB_SB_command, tt, zout) | ++ IO_STATE(USB_SB_command, full, yes) | ++ IO_STATE(USB_SB_command, eot, yes) | ++ IO_STATE(USB_SB_command, eol, yes)); ++ ++ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { ++ CHECK_ALIGN(&TxIntrEPList[i]); ++ TxIntrEPList[i].hw_len = 0; ++ TxIntrEPList[i].command = ++ (IO_STATE(USB_EP_command, eof, yes) | ++ IO_STATE(USB_EP_command, enable, yes) | ++ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); ++ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); ++ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); ++ } ++ ++ /* Special handling of last descr in list, make list circular */ ++ CHECK_ALIGN(&TxIntrEPList[i]); ++ TxIntrEPList[i].hw_len = 0; ++ TxIntrEPList[i].command = ++ (IO_STATE(USB_EP_command, eof, yes) | ++ IO_STATE(USB_EP_command, eol, yes) | ++ IO_STATE(USB_EP_command, enable, yes) | ++ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); ++ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); ++ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); ++ ++ intr_dbg("Initiated Intr EP descriptor list\n"); ++ ++ ++ /* Connect DMA 8 sub-channel 2 to first in list */ ++ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); ++} ++ ++static void tc_dma_init_tx_isoc_list(void) { ++ int i; ++ ++ DBFENTER; ++ ++ /* Read comment at zout_buffer declaration for an explanation to this. */ ++ TxIsocSB_zout.sw_len = 1; ++ TxIsocSB_zout.next = 0; ++ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); ++ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | ++ IO_STATE(USB_SB_command, tt, zout) | ++ IO_STATE(USB_SB_command, full, yes) | ++ IO_STATE(USB_SB_command, eot, yes) | ++ IO_STATE(USB_SB_command, eol, yes)); ++ ++ /* The last isochronous EP descriptor is a dummy. */ ++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { ++ CHECK_ALIGN(&TxIsocEPList[i]); ++ TxIsocEPList[i].hw_len = 0; ++ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); ++ TxIsocEPList[i].sub = 0; ++ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); ++ } ++ ++ CHECK_ALIGN(&TxIsocEPList[i]); ++ TxIsocEPList[i].hw_len = 0; ++ ++ /* Must enable the last EP descr to get eof interrupt. */ ++ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | ++ IO_STATE(USB_EP_command, eof, yes) | ++ IO_STATE(USB_EP_command, eol, yes) | ++ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); ++ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); ++ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); ++ ++ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); ++ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); ++} ++ ++static int tc_dma_init(struct usb_hcd *hcd) { ++ tc_dma_init_rx_list(); ++ tc_dma_init_tx_bulk_list(); ++ tc_dma_init_tx_ctrl_list(); ++ tc_dma_init_tx_intr_list(); ++ tc_dma_init_tx_isoc_list(); ++ ++ if (cris_request_dma(USB_TX_DMA_NBR, ++ "ETRAX 100LX built-in USB (Tx)", ++ DMA_VERBOSE_ON_ERROR, ++ dma_usb)) { ++ err("Could not allocate DMA ch 8 for USB"); ++ return -EBUSY; ++ } ++ ++ if (cris_request_dma(USB_RX_DMA_NBR, ++ "ETRAX 100LX built-in USB (Rx)", ++ DMA_VERBOSE_ON_ERROR, ++ dma_usb)) { ++ err("Could not allocate DMA ch 9 for USB"); ++ return -EBUSY; ++ } ++ ++ *R_IRQ_MASK2_SET = ++ /* Note that these interrupts are not used. */ ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | ++ /* Sub channel 1 (ctrl) descr. interrupts are used. */ ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | ++ /* Sub channel 3 (isoc) descr. interrupts are used. */ ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); ++ ++ /* Note that the dma9_descr interrupt is not used. */ ++ *R_IRQ_MASK2_SET = ++ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | ++ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); ++ ++ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0, ++ "ETRAX 100LX built-in USB (Rx)", hcd)) { ++ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); ++ return -EBUSY; ++ } ++ ++ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0, ++ "ETRAX 100LX built-in USB (Tx)", hcd)) { ++ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); ++ return -EBUSY; ++ } ++ ++ return 0; ++} ++ ++static void tc_dma_destroy(void) { ++ free_irq(ETRAX_USB_RX_IRQ, NULL); ++ free_irq(ETRAX_USB_TX_IRQ, NULL); ++ ++ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)"); ++ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)"); ++ ++} ++ ++static void tc_dma_link_intr_urb(struct urb *urb); ++ ++/* Handle processing of Bulk, Ctrl and Intr queues */ ++static void tc_dma_process_queue(int epid) { ++ struct urb *urb; ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ unsigned long flags; ++ char toggle; ++ ++ if(epid_state[epid].disabled) { ++ /* Don't process any URBs on a disabled endpoint */ ++ return; ++ } ++ ++ /* Do not disturb us while fiddling with EPs and epids */ ++ local_irq_save(flags); ++ ++ /* For bulk, Ctrl and Intr can we only have one URB active at a time for ++ a specific EP. */ ++ if(activeUrbList[epid] != NULL) { ++ /* An URB is already active on EP, skip checking queue */ ++ local_irq_restore(flags); ++ return; ++ } ++ ++ urb = urb_list_first(epid); ++ if(urb == NULL) { ++ /* No URB waiting in EP queue. Nothing do to */ ++ local_irq_restore(flags); ++ return; ++ } ++ ++ urb_priv = urb->hcpriv; ++ ASSERT(urb_priv != NULL); ++ ASSERT(urb_priv->urb_state == NOT_STARTED); ++ ASSERT(!usb_pipeisoc(urb->pipe)); ++ ++ /* Remove this URB from the queue and move it to active */ ++ activeUrbList[epid] = urb; ++ urb_list_del(urb, epid); ++ ++ urb_priv->urb_state = STARTED; ++ ++ /* Reset error counters (regardless of which direction this traffic is). */ ++ etrax_epid_clear_error(epid); ++ ++ /* Special handling of Intr EP lists */ ++ if(usb_pipeint(urb->pipe)) { ++ tc_dma_link_intr_urb(urb); ++ local_irq_restore(flags); ++ return; ++ } ++ ++ /* Software must preset the toggle bits for Bulk and Ctrl */ ++ if(usb_pipecontrol(urb->pipe)) { ++ /* Toggle bits are initialized only during setup transaction in a ++ CTRL transfer */ ++ etrax_epid_set_toggle(epid, 0, 0); ++ etrax_epid_set_toggle(epid, 1, 0); ++ } else { ++ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), ++ usb_pipeout(urb->pipe)); ++ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle); ++ } ++ ++ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n", ++ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid, ++ sblist_to_str(urb_priv->first_sb)); ++ ++ /* We start the DMA sub channel without checking if it's running or not, ++ because: ++ 1) If it's already running, issuing the start command is a nop. ++ 2) We avoid a test-and-set race condition. */ ++ switch(usb_pipetype(urb->pipe)) { ++ case PIPE_BULK: ++ /* Assert that the EP descriptor is disabled. */ ++ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); ++ ++ /* Set up and enable the EP descriptor. */ ++ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ TxBulkEPList[epid].hw_len = 0; ++ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ ++ /* Check if the dummy list is already with us (if several urbs were queued). */ ++ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) { ++ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d", ++ (unsigned long)urb, epid); ++ ++ /* We don't need to check if the DMA is at this EP or not before changing the ++ next pointer, since we will do it in one 32-bit write (EP descriptors are ++ 32-bit aligned). */ ++ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); ++ } ++ ++ restart_dma8_sub0(); ++ ++ /* Update/restart the bulk start timer since we just started the channel.*/ ++ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); ++ /* Update/restart the bulk eot timer since we just inserted traffic. */ ++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); ++ break; ++ case PIPE_CONTROL: ++ /* Assert that the EP descriptor is disabled. */ ++ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); ++ ++ /* Set up and enable the EP descriptor. */ ++ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ TxCtrlEPList[epid].hw_len = 0; ++ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ ++ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); ++ break; ++ } ++ local_irq_restore(flags); ++} ++ ++static void tc_dma_link_intr_urb(struct urb *urb) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ volatile struct USB_EP_Desc *tmp_ep; ++ struct USB_EP_Desc *ep_desc; ++ int i = 0, epid; ++ int pool_idx = 0; ++ ++ ASSERT(urb_priv != NULL); ++ epid = urb_priv->epid; ++ ASSERT(urb_priv->interval > 0); ++ ASSERT(urb_priv->intr_ep_pool_length > 0); ++ ++ tmp_ep = &TxIntrEPList[0]; ++ ++ /* Only insert one EP descriptor in list for Out Intr URBs. ++ We can only handle Out Intr with interval of 128ms because ++ it's not possible to insert several Out Intr EPs because they ++ are not consumed by the DMA. */ ++ if(usb_pipeout(urb->pipe)) { ++ ep_desc = urb_priv->intr_ep_pool[0]; ++ ASSERT(ep_desc); ++ ep_desc->next = tmp_ep->next; ++ tmp_ep->next = virt_to_phys(ep_desc); ++ i++; ++ } else { ++ /* Loop through Intr EP descriptor list and insert EP for URB at ++ specified interval */ ++ do { ++ /* Each EP descriptor with eof flag sat signals a new frame */ ++ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { ++ /* Insert a EP from URBs EP pool at correct interval */ ++ if ((i % urb_priv->interval) == 0) { ++ ep_desc = urb_priv->intr_ep_pool[pool_idx]; ++ ASSERT(ep_desc); ++ ep_desc->next = tmp_ep->next; ++ tmp_ep->next = virt_to_phys(ep_desc); ++ pool_idx++; ++ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length); + } ++ i++; ++ } ++ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next); ++ } while(tmp_ep != &TxIntrEPList[0]); ++ } ++ ++ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid, ++ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx); ++ ++ /* We start the DMA sub channel without checking if it's running or not, ++ because: ++ 1) If it's already running, issuing the start command is a nop. ++ 2) We avoid a test-and-set race condition. */ ++ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); ++} ++ ++static void tc_dma_process_isoc_urb(struct urb *urb) { ++ unsigned long flags; ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ int epid; ++ ++ /* Do not disturb us while fiddling with EPs and epids */ ++ local_irq_save(flags); ++ ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->first_sb); ++ epid = urb_priv->epid; ++ ++ if(activeUrbList[epid] == NULL) { ++ /* EP is idle, so make this URB active */ ++ activeUrbList[epid] = urb; ++ urb_list_del(urb, epid); ++ ASSERT(TxIsocEPList[epid].sub == 0); ++ ASSERT(!(TxIsocEPList[epid].command & ++ IO_STATE(USB_EP_command, enable, yes))); ++ ++ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/ ++ if(usb_pipein(urb->pipe)) { ++ /* Each EP for In Isoc will have only one SB descriptor, setup when ++ submitting the first active urb. We do it here by copying from URBs ++ pre-allocated SB. */ ++ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb, ++ sizeof(TxIsocSBList[epid])); ++ TxIsocEPList[epid].hw_len = 0; ++ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid])); ++ } else { ++ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */ ++ TxIsocEPList[epid].hw_len = 0; ++ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ ++ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x" ++ " last_sb::0x%x\n", ++ (unsigned int)urb, urb_priv->urb_num, epid, ++ (unsigned int)(urb_priv->first_sb), ++ (unsigned int)(urb_priv->last_sb)); ++ } ++ ++ if (urb->transfer_flags & URB_ISO_ASAP) { ++ /* The isoc transfer should be started as soon as possible. The ++ start_frame field is a return value if URB_ISO_ASAP was set. Comparing ++ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN ++ token is sent 2 frames later. I'm not sure how this affects usage of ++ the start_frame field by the device driver, or how it affects things ++ when USB_ISO_ASAP is not set, so therefore there's no compensation for ++ the 2 frame "lag" here. */ ++ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); ++ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ urb_priv->urb_state = STARTED; ++ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n", ++ urb->start_frame); ++ } else { ++ /* Not started yet. */ ++ urb_priv->urb_state = NOT_STARTED; ++ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n", ++ (unsigned int)urb); ++ } ++ ++ } else { ++ /* An URB is already active on the EP. Leave URB in queue and let ++ finish_isoc_urb process it after current active URB */ ++ ASSERT(TxIsocEPList[epid].sub != 0); ++ ++ if(usb_pipein(urb->pipe)) { ++ /* Because there already is a active In URB on this epid we do nothing ++ and the finish_isoc_urb() function will handle switching to next URB*/ ++ ++ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */ ++ struct USB_SB_Desc *temp_sb_desc; ++ ++ /* Set state STARTED to all Out Isoc URBs added to SB list because we ++ don't know how many of them that are finished before descr interrupt*/ ++ urb_priv->urb_state = STARTED; ++ ++ /* Find end of current SB list by looking for SB with eol flag sat */ ++ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); ++ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != ++ IO_STATE(USB_SB_command, eol, yes)) { ++ ASSERT(temp_sb_desc->next); ++ temp_sb_desc = phys_to_virt(temp_sb_desc->next); ++ } ++ ++ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d" ++ " sub:0x%x eol:0x%x\n", ++ (unsigned int)urb, urb_priv->urb_num, ++ (unsigned int)(urb_priv->first_sb), ++ (unsigned int)(urb_priv->last_sb), epid, ++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), ++ (unsigned int)temp_sb_desc); ++ ++ /* Next pointer must be set before eol is removed. */ ++ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); ++ /* Clear the previous end of list flag since there is a new in the ++ added SB descriptor list. */ ++ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); ++ ++ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { ++ __u32 epid_data; ++ /* 8.8.5 in Designer's Reference says we should check for and correct ++ any errors in the EP here. That should not be necessary if ++ epid_attn is handled correctly, so we assume all is ok. */ ++ epid_data = etrax_epid_iso_get(epid); ++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) != ++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending" ++ " URB:0x%x[%d]\n", ++ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid, ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ ++ /* The SB list was exhausted. */ ++ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { ++ /* The new sublist did not get processed before the EP was ++ disabled. Setup the EP again. */ ++ ++ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) { ++ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted" ++ ", restarting from this URBs SB:0x%x\n", ++ epid, (unsigned int)temp_sb_desc, ++ (unsigned int)(urb_priv->first_sb)); ++ TxIsocEPList[epid].hw_len = 0; ++ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); ++ /* Enable the EP again so data gets processed this time */ ++ TxIsocEPList[epid].command |= ++ IO_STATE(USB_EP_command, enable, yes); ++ ++ } else { ++ /* The EP has been disabled but not at end this URB (god knows ++ where). This should generate an epid_attn so we should not be ++ here */ ++ isoc_warn("EP was disabled on sb:0x%x before SB list for" ++ " URB:0x%x[%d] got processed\n", ++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ } else { ++ /* This might happend if we are slow on this function and isn't ++ an error. */ ++ isoc_dbg("EP was disabled and finished with SBs from appended" ++ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num); ++ } ++ } ++ } ++ } ++ ++ /* Start the DMA sub channel */ ++ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); ++ ++ local_irq_restore(flags); ++} ++ ++static void tc_dma_unlink_intr_urb(struct urb *urb) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ ++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ ++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ ++ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from ++ the list. */ ++ int count = 0; ++ volatile int timeout = 10000; ++ int epid; ++ ++ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the ++ List". */ ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->intr_ep_pool_length > 0); ++ epid = urb_priv->epid; ++ ++ /* First disable all Intr EPs belonging to epid for this URB */ ++ first_ep = &TxIntrEPList[0]; ++ curr_ep = first_ep; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { ++ /* Disable EP */ ++ next_ep->command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != first_ep); ++ ++ ++ /* Now unlink all EPs belonging to this epid from Descr list */ ++ first_ep = &TxIntrEPList[0]; ++ curr_ep = first_ep; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { ++ /* This is the one we should unlink. */ ++ unlink_ep = next_ep; ++ ++ /* Actually unlink the EP from the DMA list. */ ++ curr_ep->next = unlink_ep->next; ++ ++ /* Wait until the DMA is no longer at this descriptor. */ ++ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n"); ++ } ++ ++ count++; ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != first_ep); ++ ++ if(count != urb_priv->intr_ep_pool_length) { ++ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count, ++ urb_priv->intr_ep_pool_length, (unsigned int)urb, ++ urb_priv->urb_num); ++ } else { ++ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count, ++ urb_priv->intr_ep_pool_length, (unsigned int)urb); ++ } ++} ++ ++static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, ++ int timer) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ __u32 epid_data; ++ ++ /* Protect TxEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ /* A finished EP descriptor is disabled and has a valid sub pointer */ ++ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && ++ (TxBulkEPList[epid].sub != 0)) { ++ ++ /* Get the active URB for this epid */ ++ urb = activeUrbList[epid]; ++ /* Sanity checks */ ++ ASSERT(urb); ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ /* Only handle finished out Bulk EPs here, ++ and let RX interrupt take care of the rest */ ++ if(!epid_out_traffic(epid)) { ++ continue; ++ } ++ ++ if(timer) { ++ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n", ++ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, ++ urb_priv->urb_num); ++ } else { ++ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n", ++ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, ++ urb_priv->urb_num); ++ } ++ ++ if(urb_priv->urb_state == UNLINK) { ++ /* This Bulk URB is requested to be unlinked, that means that the EP ++ has been disabled and we might not have sent all data */ ++ tc_finish_urb(hcd, urb, urb->status); ++ continue; ++ } ++ ++ ASSERT(urb_priv->urb_state == STARTED); ++ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { ++ tc_err("Endpoint got disabled before reaching last sb\n"); ++ } ++ ++ epid_data = etrax_epid_get(epid); ++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == ++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ /* This means that the endpoint has no error, is disabled ++ and had inserted traffic, i.e. transfer successfully completed. */ ++ tc_finish_urb(hcd, urb, 0); ++ } else { ++ /* Shouldn't happen. We expect errors to be caught by epid ++ attention. */ ++ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n", ++ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); ++ } ++ } else { ++ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid); ++ } ++ } ++ ++ local_irq_restore(flags); ++} ++ ++static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ __u32 epid_data; ++ ++ /* Protect TxEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if(epid == DUMMY_EPID) ++ continue; ++ ++ /* A finished EP descriptor is disabled and has a valid sub pointer */ ++ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) && ++ (TxCtrlEPList[epid].sub != 0)) { ++ ++ /* Get the active URB for this epid */ ++ urb = activeUrbList[epid]; ++ ++ if(urb == NULL) { ++ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid); ++ continue; ++ } ++ ++ /* Sanity checks */ ++ ASSERT(usb_pipein(urb->pipe)); ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) { ++ tc_err("Endpoint got disabled before reaching last sb\n"); ++ } ++ ++ epid_data = etrax_epid_get(epid); ++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == ++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ /* This means that the endpoint has no error, is disabled ++ and had inserted traffic, i.e. transfer successfully completed. */ ++ ++ /* Check if RX-interrupt for In Ctrl has been processed before ++ finishing the URB */ ++ if(urb_priv->ctrl_rx_done) { ++ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n", ++ (unsigned int)urb, urb_priv->urb_num); ++ tc_finish_urb(hcd, urb, 0); ++ } else { ++ /* If we get zout descriptor interrupt before RX was done for a ++ In Ctrl transfer, then we flag that and it will be finished ++ in the RX-Interrupt */ ++ urb_priv->ctrl_zout_done = 1; ++ tc_dbg("Got zout descr interrupt before RX interrupt\n"); ++ } ++ } else { ++ /* Shouldn't happen. We expect errors to be caught by epid ++ attention. */ ++ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); ++ __dump_ep_desc(&(TxCtrlEPList[epid])); ++ __dump_ept_data(epid); ++ } ++ } ++ } ++ local_irq_restore(flags); ++} ++ ++/* This function goes through all epids that are setup for Out Isoc transfers ++ and marks (isoc_out_done) all queued URBs that the DMA has finished ++ transfer for. ++ No URB completetion is done here to make interrupt routine return quickly. ++ URBs are completed later with help of complete_isoc_bottom_half() that ++ becomes schedules when this functions is finished. */ ++static void check_finished_isoc_tx_epids(void) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ struct USB_SB_Desc* sb_desc; ++ int epid_done; ++ ++ /* Protect TxIsocEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID || ++ !epid_out_traffic(epid)) { ++ /* Nothing here to see. */ ++ continue; ++ } ++ ASSERT(epid_inuse(epid)); ++ ASSERT(epid_isoc(epid)); ++ ++ sb_desc = phys_to_virt(TxIsocEPList[epid].sub); ++ /* Find the last descriptor of the currently active URB for this ep. ++ This is the first descriptor in the sub list marked for a descriptor ++ interrupt. */ ++ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { ++ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; ++ } ++ ASSERT(sb_desc); ++ ++ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n", ++ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), ++ (unsigned int)sb_desc); ++ ++ urb = activeUrbList[epid]; ++ if(urb == NULL) { ++ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid); ++ continue; ++ } ++ ++ epid_done = 0; ++ while(urb && !epid_done) { ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); ++ ASSERT(usb_pipeout(urb->pipe)); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->urb_state == STARTED || ++ urb_priv->urb_state == UNLINK); ++ ++ if (sb_desc != urb_priv->last_sb) { ++ /* This urb has been sent. */ ++ urb_priv->isoc_out_done = 1; ++ ++ } else { /* Found URB that has last_sb as the interrupt reason */ ++ ++ /* Check if EP has been disabled, meaning that all transfers are done*/ ++ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { ++ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) == ++ IO_STATE(USB_SB_command, eol, yes)); ++ ASSERT(sb_desc->next == 0); ++ urb_priv->isoc_out_done = 1; ++ } else { ++ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n", ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ /* Stop looking any further in queue */ ++ epid_done = 1; ++ } ++ ++ if (!epid_done) { ++ if(urb == activeUrbList[epid]) { ++ urb = urb_list_first(epid); ++ } else { ++ urb = urb_list_next(urb, epid); ++ } ++ } ++ } /* END: while(urb && !epid_done) */ ++ } ++ ++ local_irq_restore(flags); ++} ++ ++ ++/* This is where the Out Isoc URBs are realy completed. This function is ++ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers ++ are done. This functions completes all URBs earlier marked with ++ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */ ++ ++static void complete_isoc_bottom_half(void *data) { ++ struct crisv10_isoc_complete_data *comp_data; ++ struct usb_iso_packet_descriptor *packet; ++ struct crisv10_urb_priv * urb_priv; ++ unsigned long flags; ++ struct urb* urb; ++ int epid_done; ++ int epid; ++ int i; ++ ++ comp_data = (struct crisv10_isoc_complete_data*)data; ++ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { ++ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) { ++ /* Only check valid Out Isoc epids */ ++ continue; ++ } ++ ++ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid, ++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub)); ++ ++ /* The descriptor interrupt handler has marked all transmitted Out Isoc ++ URBs with isoc_out_done. Now we traverse all epids and for all that ++ have out Isoc traffic we traverse its URB list and complete the ++ transmitted URBs. */ ++ epid_done = 0; ++ while (!epid_done) { ++ ++ /* Get the active urb (if any) */ ++ urb = activeUrbList[epid]; ++ if (urb == 0) { ++ isoc_dbg("No active URB on epid:%d anymore\n", epid); ++ epid_done = 1; ++ continue; ++ } ++ ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); ++ ASSERT(usb_pipeout(urb->pipe)); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ if (!(urb_priv->isoc_out_done)) { ++ /* We have reached URB that isn't flaged done yet, stop traversing. */ ++ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d" ++ " before not yet flaged URB:0x%x[%d]\n", ++ epid, (unsigned int)urb, urb_priv->urb_num); ++ epid_done = 1; ++ continue; ++ } ++ ++ /* This urb has been sent. */ ++ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n", ++ (unsigned int)urb, urb_priv->urb_num); ++ ++ /* Set ok on transfered packets for this URB and finish it */ ++ for (i = 0; i < urb->number_of_packets; i++) { ++ packet = &urb->iso_frame_desc[i]; ++ packet->status = 0; ++ packet->actual_length = packet->length; ++ } ++ urb_priv->isoc_packet_counter = urb->number_of_packets; ++ tc_finish_urb(comp_data->hcd, urb, 0); ++ ++ } /* END: while(!epid_done) */ ++ } /* END: for(epid...) */ ++ ++ local_irq_restore(flags); ++ kmem_cache_free(isoc_compl_cache, comp_data); ++} ++ ++ ++static void check_finished_intr_tx_epids(struct usb_hcd *hcd) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ ++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ ++ ++ /* Protect TxintrEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) { ++ /* Nothing to see on this epid. Only check valid Out Intr epids */ ++ continue; ++ } ++ ++ urb = activeUrbList[epid]; ++ if(urb == 0) { ++ intr_warn("Found Out Intr epid:%d with no active URB\n", epid); ++ continue; ++ } ++ ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT); ++ ASSERT(usb_pipeout(urb->pipe)); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs ++ are inserted.*/ ++ curr_ep = &TxIntrEPList[0]; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if(next_ep == urb_priv->intr_ep_pool[0]) { ++ /* We found the Out Intr EP for this epid */ ++ ++ /* Disable it so it doesn't get processed again */ ++ next_ep->command &= ~IO_MASK(USB_EP_command, enable); ++ ++ /* Finish the active Out Intr URB with status OK */ ++ tc_finish_urb(hcd, urb, 0); ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != &TxIntrEPList[1]); ++ ++ } ++ local_irq_restore(flags); ++} ++ ++/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */ ++static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) { ++ struct usb_hcd *hcd = (struct usb_hcd*)vhc; ++ ASSERT(hcd); ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); ++ restart_dma8_sub0(); ++ } ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); ++ check_finished_ctrl_tx_epids(hcd); ++ } ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); ++ check_finished_intr_tx_epids(hcd); ++ } ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { ++ struct crisv10_isoc_complete_data* comp_data; ++ ++ /* Flag done Out Isoc for later completion */ ++ check_finished_isoc_tx_epids(); ++ ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); ++ /* Schedule bottom half of Out Isoc completion function. This function ++ finishes the URBs marked with isoc_out_done */ ++ comp_data = (struct crisv10_isoc_complete_data*) ++ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); ++ ASSERT(comp_data != NULL); ++ comp_data ->hcd = hcd; ++ ++ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data); ++ schedule_work(&comp_data->usb_bh); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */ ++static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) { ++ unsigned long flags; ++ struct urb *urb; ++ struct usb_hcd *hcd = (struct usb_hcd*)vhc; ++ struct crisv10_urb_priv *urb_priv; ++ int epid = 0; ++ int real_error; ++ ++ ASSERT(hcd); ++ ++ /* Clear this interrupt. */ ++ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); ++ ++ /* Custom clear interrupt for this interrupt */ ++ /* The reason we cli here is that we call the driver's callback functions. */ ++ local_irq_save(flags); ++ ++ /* Note that this while loop assumes that all packets span only ++ one rx descriptor. */ ++ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { ++ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); ++ /* Get the active URB for this epid */ ++ urb = activeUrbList[epid]; ++ ++ ASSERT(epid_inuse(epid)); ++ if (!urb) { ++ dma_err("No urb for epid %d in rx interrupt\n", epid); ++ goto skip_out; ++ } ++ ++ /* Check if any errors on epid */ ++ real_error = 0; ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { ++ __u32 r_usb_ept_data; ++ ++ if (usb_pipeisoc(urb->pipe)) { ++ r_usb_ept_data = etrax_epid_iso_get(epid); ++ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && ++ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && ++ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { ++ /* Not an error, just a failure to receive an expected iso ++ in packet in this frame. This is not documented ++ in the designers reference. Continue processing. ++ */ ++ } else real_error = 1; ++ } else real_error = 1; ++ } ++ ++ if(real_error) { ++ dma_err("Error in RX descr on epid:%d for URB 0x%x", ++ epid, (unsigned int)urb); ++ dump_ept_data(epid); ++ dump_in_desc(myNextRxDesc); ++ goto skip_out; ++ } ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->urb_state == STARTED || ++ urb_priv->urb_state == UNLINK); ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_BULK) || ++ (usb_pipetype(urb->pipe) == PIPE_CONTROL) || ++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ ++ /* We get nodata for empty data transactions, and the rx descriptor's ++ hw_len field is not valid in that case. No data to copy in other ++ words. */ ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { ++ /* No data to copy */ ++ } else { ++ /* ++ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n", ++ (unsigned int)urb, epid, myNextRxDesc->hw_len, ++ urb_priv->rx_offset); ++ */ ++ /* Only copy data if URB isn't flaged to be unlinked*/ ++ if(urb_priv->urb_state != UNLINK) { ++ /* Make sure the data fits in the buffer. */ ++ if(urb_priv->rx_offset + myNextRxDesc->hw_len ++ <= urb->transfer_buffer_length) { ++ ++ /* Copy the data to URBs buffer */ ++ memcpy(urb->transfer_buffer + urb_priv->rx_offset, ++ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); ++ urb_priv->rx_offset += myNextRxDesc->hw_len; ++ } else { ++ /* Signal overflow when returning URB */ ++ urb->status = -EOVERFLOW; ++ tc_finish_urb_later(hcd, urb, urb->status); ++ } ++ } ++ } ++ ++ /* Check if it was the last packet in the transfer */ ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { ++ /* Special handling for In Ctrl URBs. */ ++ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) && ++ !(urb_priv->ctrl_zout_done)) { ++ /* Flag that RX part of Ctrl transfer is done. Because zout descr ++ interrupt hasn't happend yet will the URB be finished in the ++ TX-Interrupt. */ ++ urb_priv->ctrl_rx_done = 1; ++ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting" ++ " for zout\n", (unsigned int)urb); ++ } else { ++ tc_finish_urb(hcd, urb, 0); ++ } ++ } ++ } else { /* ISOC RX */ ++ /* ++ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n", ++ epid, (unsigned int)urb); ++ */ ++ ++ struct usb_iso_packet_descriptor *packet; ++ ++ if (urb_priv->urb_state == UNLINK) { ++ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n"); ++ goto skip_out; ++ } else if (urb_priv->urb_state == NOT_STARTED) { ++ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n"); ++ goto skip_out; ++ } ++ ++ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; ++ ASSERT(packet); ++ packet->status = 0; ++ ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { ++ /* We get nodata for empty data transactions, and the rx descriptor's ++ hw_len field is not valid in that case. We copy 0 bytes however to ++ stay in synch. */ ++ packet->actual_length = 0; ++ } else { ++ packet->actual_length = myNextRxDesc->hw_len; ++ /* Make sure the data fits in the buffer. */ ++ ASSERT(packet->actual_length <= packet->length); ++ memcpy(urb->transfer_buffer + packet->offset, ++ phys_to_virt(myNextRxDesc->buf), packet->actual_length); ++ if(packet->actual_length > 0) ++ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n", ++ packet->actual_length, urb_priv->isoc_packet_counter, ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ ++ /* Increment the packet counter. */ ++ urb_priv->isoc_packet_counter++; ++ ++ /* Note that we don't care about the eot field in the rx descriptor's ++ status. It will always be set for isoc traffic. */ ++ if (urb->number_of_packets == urb_priv->isoc_packet_counter) { ++ /* Complete the urb with status OK. */ ++ tc_finish_urb(hcd, urb, 0); ++ } ++ } ++ ++ skip_out: ++ myNextRxDesc->status = 0; ++ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol); ++ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); ++ myLastRxDesc = myNextRxDesc; ++ myNextRxDesc = phys_to_virt(myNextRxDesc->next); ++ flush_etrax_cache(); ++ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart); ++ } ++ ++ local_irq_restore(flags); ++ ++ return IRQ_HANDLED; ++} ++ ++static void tc_bulk_start_timer_func(unsigned long dummy) { ++ /* We might enable an EP descriptor behind the current DMA position when ++ it's about to decide that there are no more bulk traffic and it should ++ stop the bulk channel. ++ Therefore we periodically check if the bulk channel is stopped and there ++ is an enabled bulk EP descriptor, in which case we start the bulk ++ channel. */ ++ ++ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { ++ int epid; ++ ++ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n"); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n", ++ epid); ++ restart_dma8_sub0(); ++ ++ /* Restart the bulk eot timer since we just started the bulk channel.*/ ++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); ++ ++ /* No need to search any further. */ ++ break; ++ } ++ } ++ } else { ++ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n"); ++ } ++} ++ ++static void tc_bulk_eot_timer_func(unsigned long dummy) { ++ struct usb_hcd *hcd = (struct usb_hcd*)dummy; ++ ASSERT(hcd); ++ /* Because of a race condition in the top half, we might miss a bulk eot. ++ This timer "simulates" a bulk eot if we don't get one for a while, ++ hopefully correcting the situation. */ ++ timer_dbg("bulk_eot_timer timed out.\n"); ++ check_finished_bulk_tx_epids(hcd, 1); ++} ++ ++ ++/*************************************************************/ ++/*************************************************************/ ++/* Device driver block */ ++/*************************************************************/ ++/*************************************************************/ ++ ++/* Forward declarations for device driver functions */ ++static int devdrv_hcd_probe(struct device *); ++static int devdrv_hcd_remove(struct device *); ++#ifdef CONFIG_PM ++static int devdrv_hcd_suspend(struct device *, u32, u32); ++static int devdrv_hcd_resume(struct device *, u32); ++#endif /* CONFIG_PM */ ++ ++/* the device */ ++static struct platform_device *devdrv_hc_platform_device; ++ ++/* device driver interface */ ++static struct device_driver devdrv_hc_device_driver = { ++ .name = (char *) hc_name, ++ .bus = &platform_bus_type, ++ ++ .probe = devdrv_hcd_probe, ++ .remove = devdrv_hcd_remove, ++ ++#ifdef CONFIG_PM ++ .suspend = devdrv_hcd_suspend, ++ .resume = devdrv_hcd_resume, ++#endif /* CONFIG_PM */ ++}; + +- CHECK_ALIGN(&TxIsocEPList[i]); +- TxIsocEPList[i].hw_len = 0; +- +- /* Must enable the last EP descr to get eof interrupt. */ +- TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | +- IO_STATE(USB_EP_command, eof, yes) | +- IO_STATE(USB_EP_command, eol, yes) | +- IO_FIELD(USB_EP_command, epid, INVALID_EPID)); +- TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); +- TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); +- +- *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); +- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); +- +- DBFEXIT; +-} +- +-static void etrax_usb_unlink_intr_urb(struct urb *urb) ++/* initialize the host controller and driver */ ++static int __init_or_module devdrv_hcd_probe(struct device *dev) + { +- volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */ +- volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */ +- volatile USB_EP_Desc_t *next_ep; /* The EP after current. */ +- volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */ +- +- int epid; +- +- /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */ +- +- DBFENTER; +- +- epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid; +- +- first_ep = &TxIntrEPList[0]; +- curr_ep = first_ep; +- +- +- /* Note that this loop removes all EP descriptors with this epid. This assumes +- that all EP descriptors belong to the one and only urb for this epid. */ +- +- do { +- next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next); +- +- if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { +- +- dbg_intr("Found EP to unlink for epid %d", epid); +- +- /* This is the one we should unlink. */ +- unlink_ep = next_ep; +- +- /* Actually unlink the EP from the DMA list. */ +- curr_ep->next = unlink_ep->next; +- +- /* Wait until the DMA is no longer at this descriptor. */ +- while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)); ++ struct usb_hcd *hcd; ++ struct crisv10_hcd *crisv10_hcd; ++ int retval; ++ ++ /* Check DMA burst length */ ++ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) != ++ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) { ++ devdrv_err("Invalid DMA burst length in Etrax 100LX," ++ " needs to be 32\n"); ++ return -EPERM; ++ } ++ ++ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id); ++ if (!hcd) ++ return -ENOMEM; ++ ++ crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ spin_lock_init(&crisv10_hcd->lock); ++ crisv10_hcd->num_ports = num_ports(); ++ crisv10_hcd->running = 0; ++ ++ dev_set_drvdata(dev, crisv10_hcd); ++ ++ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ, ++ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ); ++ ++ /* Print out chip version read from registers */ ++ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major); ++ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor); ++ if(rev_min == 0) { ++ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj); ++ } else { ++ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min); ++ } ++ ++ devdrv_info("Bulk timer interval, start:%d eot:%d\n", ++ BULK_START_TIMER_INTERVAL, ++ BULK_EOT_TIMER_INTERVAL); ++ ++ ++ /* Init root hub data structures */ ++ if(rh_init()) { ++ devdrv_err("Failed init data for Root Hub\n"); ++ retval = -ENOMEM; ++ } ++ ++ if(port_in_use(0)) { ++ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) { ++ printk(KERN_CRIT "usb-host: request IO interface usb1 failed"); ++ retval = -EBUSY; ++ goto out; ++ } ++ devdrv_info("Claimed interface for USB physical port 1\n"); ++ } ++ if(port_in_use(1)) { ++ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) { ++ /* Free first interface if second failed to be claimed */ ++ if(port_in_use(0)) { ++ cris_free_io_interface(if_usb_1); ++ } ++ printk(KERN_CRIT "usb-host: request IO interface usb2 failed"); ++ retval = -EBUSY; ++ goto out; ++ } ++ devdrv_info("Claimed interface for USB physical port 2\n"); ++ } ++ ++ /* Init transfer controller structs and locks */ ++ if((retval = tc_init(hcd)) != 0) { ++ goto out; ++ } ++ ++ /* Attach interrupt functions for DMA and init DMA controller */ ++ if((retval = tc_dma_init(hcd)) != 0) { ++ goto out; ++ } ++ ++ /* Attach the top IRQ handler for USB controller interrupts */ ++ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0, ++ "ETRAX 100LX built-in USB (HC)", hcd)) { ++ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); ++ retval = -EBUSY; ++ goto out; ++ } ++ ++ /* iso_eof is only enabled when isoc traffic is running. */ ++ *R_USB_IRQ_MASK_SET = ++ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */ ++ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | ++ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | ++ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | ++ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); ++ ++ ++ crisv10_ready_wait(); ++ /* Reset the USB interface. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); ++ ++ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to ++ 0x2A30 (10800), to guarantee that control traffic gets 10% of the ++ bandwidth, and periodic transfer may allocate the rest (90%). ++ This doesn't work though. ++ The value 11960 is chosen to be just after the SOF token, with a couple ++ of bit times extra for possible bit stuffing. */ ++ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); ++ ++ crisv10_ready_wait(); ++ /* Configure the USB interface as a host controller. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); ++ ++ ++ /* Check so controller not busy before enabling ports */ ++ crisv10_ready_wait(); ++ ++ /* Enable selected USB ports */ ++ if(port_in_use(0)) { ++ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); ++ } else { ++ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); ++ } ++ if(port_in_use(1)) { ++ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); ++ } else { ++ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); ++ } ++ ++ crisv10_ready_wait(); ++ /* Start processing of USB traffic. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); ++ ++ /* Do not continue probing initialization before USB interface is done */ ++ crisv10_ready_wait(); ++ ++ /* Register our Host Controller to USB Core ++ * Finish the remaining parts of generic HCD initialization: allocate the ++ * buffers of consistent memory, register the bus ++ * and call the driver's reset() and start() routines. */ ++ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED); ++ if (retval != 0) { ++ devdrv_err("Failed registering HCD driver\n"); ++ goto out; ++ } ++ ++ return 0; ++ ++ out: ++ devdrv_hcd_remove(dev); ++ return retval; ++} ++ ++ ++/* cleanup after the host controller and driver */ ++static int __init_or_module devdrv_hcd_remove(struct device *dev) ++{ ++ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev); ++ struct usb_hcd *hcd; ++ ++ if (!crisv10_hcd) ++ return 0; ++ hcd = crisv10_hcd_to_hcd(crisv10_hcd); ++ ++ ++ /* Stop USB Controller in Etrax 100LX */ ++ crisv10_hcd_reset(hcd); ++ ++ usb_remove_hcd(hcd); ++ devdrv_dbg("Removed HCD from USB Core\n"); ++ ++ /* Free USB Controller IRQ */ ++ free_irq(ETRAX_USB_HC_IRQ, NULL); ++ ++ /* Free resources */ ++ tc_dma_destroy(); ++ tc_destroy(); ++ ++ ++ if(port_in_use(0)) { ++ cris_free_io_interface(if_usb_1); ++ } ++ if(port_in_use(1)) { ++ cris_free_io_interface(if_usb_2); ++ } ++ ++ devdrv_dbg("Freed all claimed resources\n"); ++ ++ return 0; ++} ++ ++ ++#ifdef CONFIG_PM ++ ++static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level) ++{ ++ return 0; /* no-op for now */ ++} ++ ++static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level) ++{ ++ return 0; /* no-op for now */ ++} ++ ++#endif /* CONFIG_PM */ ++ ++ ++ ++/*************************************************************/ ++/*************************************************************/ ++/* Module block */ ++/*************************************************************/ ++/*************************************************************/ ++ ++/* register driver */ ++static int __init module_hcd_init(void) ++{ ++ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ /* Here we select enabled ports by following defines created from ++ menuconfig */ ++#ifndef CONFIG_ETRAX_USB_HOST_PORT1 ++ ports &= ~(1<<0); ++#endif ++#ifndef CONFIG_ETRAX_USB_HOST_PORT2 ++ ports &= ~(1<<1); ++#endif + +- /* Now we are free to remove it and its SB descriptor. +- Note that it is assumed here that there is only one sb in the +- sb list for this ep. */ +- kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub)); +- kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep); +- } ++ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc); + +- curr_ep = phys_to_virt(curr_ep->next); ++ devdrv_hc_platform_device = ++ platform_device_register_simple((char *) hc_name, 0, NULL, 0); + +- } while (curr_ep != first_ep); +- urb->hcpriv = NULL; ++ if (IS_ERR(devdrv_hc_platform_device)) ++ return PTR_ERR(devdrv_hc_platform_device); ++ return driver_register(&devdrv_hc_device_driver); ++ /* ++ * Note that we do not set the DMA mask for the device, ++ * i.e. we pretend that we will use PIO, since no specific ++ * allocation routines are needed for DMA buffers. This will ++ * cause the HCD buffer allocation routines to fall back to ++ * kmalloc(). ++ */ + } + +-void etrax_usb_do_intr_recover(int epid) +-{ +- USB_EP_Desc_t *first_ep, *tmp_ep; ++/* unregister driver */ ++static void __exit module_hcd_exit(void) ++{ ++ driver_unregister(&devdrv_hc_device_driver); ++} + +- DBFENTER; +- +- first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP); +- tmp_ep = first_ep; +- +- /* What this does is simply to walk the list of interrupt +- ep descriptors and enable those that are disabled. */ +- +- do { +- if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid && +- !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) { +- tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes); +- } +- +- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); +- +- } while (tmp_ep != first_ep); +- +- +- DBFEXIT; +-} +- +-static int etrax_rh_unlink_urb (struct urb *urb) +-{ +- etrax_hc_t *hc; +- +- DBFENTER; +- +- hc = urb->dev->bus->hcpriv; +- +- if (hc->rh.urb == urb) { +- hc->rh.send = 0; +- del_timer(&hc->rh.rh_int_timer); +- } +- +- DBFEXIT; +- return 0; +-} +- +-static void etrax_rh_send_irq(struct urb *urb) +-{ +- __u16 data = 0; +- etrax_hc_t *hc = urb->dev->bus->hcpriv; +- DBFENTER; +- +-/* +- dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER); +- dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING); +-*/ +- +- data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0; +- data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0; +- +- *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data); +- /* FIXME: Why is actual_length set to 1 when data is 2 bytes? +- Since only 1 byte is used, why not declare data as __u8? */ +- urb->actual_length = 1; +- urb->status = 0; +- +- if (hc->rh.send && urb->complete) { +- dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1); +- dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2); +- +- urb->complete(urb, NULL); +- } +- +- DBFEXIT; +-} +- +-static void etrax_rh_init_int_timer(struct urb *urb) +-{ +- etrax_hc_t *hc; +- +- DBFENTER; +- +- hc = urb->dev->bus->hcpriv; +- hc->rh.interval = urb->interval; +- init_timer(&hc->rh.rh_int_timer); +- hc->rh.rh_int_timer.function = etrax_rh_int_timer_do; +- hc->rh.rh_int_timer.data = (unsigned long)urb; +- /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped +- to 0, and the rest to the nearest lower 10 ms. */ +- hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000); +- add_timer(&hc->rh.rh_int_timer); +- +- DBFEXIT; +-} +- +-static void etrax_rh_int_timer_do(unsigned long ptr) +-{ +- struct urb *urb; +- etrax_hc_t *hc; +- +- DBFENTER; +- +- urb = (struct urb*)ptr; +- hc = urb->dev->bus->hcpriv; +- +- if (hc->rh.send) { +- etrax_rh_send_irq(urb); +- } +- +- DBFEXIT; +-} +- +-static int etrax_usb_setup_epid(struct urb *urb) +-{ +- int epid; +- char devnum, endpoint, out_traffic, slow; +- int maxlen; +- unsigned long flags; +- +- DBFENTER; +- +- epid = etrax_usb_lookup_epid(urb); +- if ((epid != -1)){ +- /* An epid that fits this urb has been found. */ +- DBFEXIT; +- return epid; +- } +- +- /* We must find and initiate a new epid for this urb. */ +- epid = etrax_usb_allocate_epid(); +- +- if (epid == -1) { +- /* Failed to allocate a new epid. */ +- DBFEXIT; +- return epid; +- } +- +- /* We now have a new epid to use. Initiate it. */ +- set_bit(epid, (void *)&epid_usage_bitmask); +- +- devnum = usb_pipedevice(urb->pipe); +- endpoint = usb_pipeendpoint(urb->pipe); +- slow = usb_pipeslow(urb->pipe); +- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); +- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { +- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ +- out_traffic = 1; +- } else { +- out_traffic = usb_pipeout(urb->pipe); +- } +- +- save_flags(flags); +- cli(); +- +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- +- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | +- /* FIXME: Change any to the actual port? */ +- IO_STATE(R_USB_EPT_DATA_ISO, port, any) | +- IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | +- IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | +- IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); +- } else { +- *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) | +- IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | +- /* FIXME: Change any to the actual port? */ +- IO_STATE(R_USB_EPT_DATA, port, any) | +- IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | +- IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | +- IO_FIELD(R_USB_EPT_DATA, dev, devnum); +- } +- +- restore_flags(flags); +- +- if (out_traffic) { +- set_bit(epid, (void *)&epid_out_traffic); +- } else { +- clear_bit(epid, (void *)&epid_out_traffic); +- } +- +- dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)", +- epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN"); +- +- DBFEXIT; +- return epid; +-} +- +-static void etrax_usb_free_epid(int epid) +-{ +- unsigned long flags; +- +- DBFENTER; +- +- if (!test_bit(epid, (void *)&epid_usage_bitmask)) { +- warn("Trying to free unused epid %d", epid); +- DBFEXIT; +- return; +- } +- +- save_flags(flags); +- cli(); +- +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)); +- /* This will, among other things, set the valid field to 0. */ +- *R_USB_EPT_DATA = 0; +- restore_flags(flags); +- +- clear_bit(epid, (void *)&epid_usage_bitmask); +- +- +- dbg_epid("Freed epid %d", epid); +- +- DBFEXIT; +-} +- +-static int etrax_usb_lookup_epid(struct urb *urb) +-{ +- int i; +- __u32 data; +- char devnum, endpoint, slow, out_traffic; +- int maxlen; +- unsigned long flags; +- +- DBFENTER; +- +- devnum = usb_pipedevice(urb->pipe); +- endpoint = usb_pipeendpoint(urb->pipe); +- slow = usb_pipeslow(urb->pipe); +- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); +- if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { +- /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ +- out_traffic = 1; +- } else { +- out_traffic = usb_pipeout(urb->pipe); +- } +- +- /* Step through att epids. */ +- for (i = 0; i < NBR_OF_EPIDS; i++) { +- if (test_bit(i, (void *)&epid_usage_bitmask) && +- test_bit(i, (void *)&epid_out_traffic) == out_traffic) { +- +- save_flags(flags); +- cli(); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i); +- nop(); +- +- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- data = *R_USB_EPT_DATA_ISO; +- restore_flags(flags); +- +- if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) && +- (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) && +- (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) && +- (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) { +- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", +- i, devnum, endpoint, out_traffic ? "OUT" : "IN"); +- DBFEXIT; +- return i; +- } +- } else { +- data = *R_USB_EPT_DATA; +- restore_flags(flags); +- +- if ((IO_MASK(R_USB_EPT_DATA, valid) & data) && +- (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) && +- (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) && +- (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) && +- (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) { +- dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", +- i, devnum, endpoint, out_traffic ? "OUT" : "IN"); +- DBFEXIT; +- return i; +- } +- } +- } +- } +- +- DBFEXIT; +- return -1; +-} +- +-static int etrax_usb_allocate_epid(void) +-{ +- int i; +- +- DBFENTER; +- +- for (i = 0; i < NBR_OF_EPIDS; i++) { +- if (!test_bit(i, (void *)&epid_usage_bitmask)) { +- dbg_epid("Found free epid %d", i); +- DBFEXIT; +- return i; +- } +- } +- +- dbg_epid("Found no free epids"); +- DBFEXIT; +- return -1; +-} +- +-static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags) +-{ +- etrax_hc_t *hc; +- int ret = -EINVAL; +- +- DBFENTER; +- +- if (!urb->dev || !urb->dev->bus) { +- return -ENODEV; +- } +- if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) { +- info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe); +- return -EMSGSIZE; +- } +- +- if (urb->timeout) { +- /* FIXME. */ +- warn("urb->timeout specified, ignoring."); +- } +- +- hc = (etrax_hc_t*)urb->dev->bus->hcpriv; +- +- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { +- /* This request is for the Virtual Root Hub. */ +- ret = etrax_rh_submit_urb(urb); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { +- +- ret = etrax_usb_submit_bulk_urb(urb); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { +- +- ret = etrax_usb_submit_ctrl_urb(urb); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { +- int bustime; +- +- if (urb->bandwidth == 0) { +- bustime = usb_check_bandwidth(urb->dev, urb); +- if (bustime < 0) { +- ret = bustime; +- } else { +- ret = etrax_usb_submit_intr_urb(urb); +- if (ret == 0) +- usb_claim_bandwidth(urb->dev, urb, bustime, 0); +- } +- } else { +- /* Bandwidth already set. */ +- ret = etrax_usb_submit_intr_urb(urb); +- } +- +- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- int bustime; +- +- if (urb->bandwidth == 0) { +- bustime = usb_check_bandwidth(urb->dev, urb); +- if (bustime < 0) { +- ret = bustime; +- } else { +- ret = etrax_usb_submit_isoc_urb(urb); +- if (ret == 0) +- usb_claim_bandwidth(urb->dev, urb, bustime, 0); +- } +- } else { +- /* Bandwidth already set. */ +- ret = etrax_usb_submit_isoc_urb(urb); +- } +- } +- +- DBFEXIT; +- +- if (ret != 0) +- printk("Submit URB error %d\n", ret); +- +- return ret; +-} +- +-static int etrax_usb_unlink_urb(struct urb *urb, int status) +-{ +- etrax_hc_t *hc; +- etrax_urb_priv_t *urb_priv; +- int epid; +- unsigned int flags; +- +- DBFENTER; +- +- if (!urb) { +- return -EINVAL; +- } +- +- /* Disable interrupts here since a descriptor interrupt for the isoc epid +- will modify the sb list. This could possibly be done more granular, but +- unlink_urb should not be used frequently anyway. +- */ +- +- save_flags(flags); +- cli(); +- +- if (!urb->dev || !urb->dev->bus) { +- restore_flags(flags); +- return -ENODEV; +- } +- if (!urb->hcpriv) { +- /* This happens if a device driver calls unlink on an urb that +- was never submitted (lazy driver) or if the urb was completed +- while unlink was being called. */ +- restore_flags(flags); +- return 0; +- } +- if (urb->transfer_flags & URB_ASYNC_UNLINK) { +- /* FIXME. */ +- /* If URB_ASYNC_UNLINK is set: +- unlink +- move to a separate urb list +- call complete at next sof with ECONNRESET +- +- If not: +- wait 1 ms +- unlink +- call complete with ENOENT +- */ +- warn("URB_ASYNC_UNLINK set, ignoring."); +- } +- +- /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking, +- but that doesn't work for interrupt and isochronous traffic since they are completed +- repeatedly, and urb->status is set then. That may in itself be a bug though. */ +- +- hc = urb->dev->bus->hcpriv; +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- epid = urb_priv->epid; +- +- /* Set the urb status (synchronous unlink). */ +- urb->status = -ENOENT; +- urb_priv->urb_state = UNLINK; +- +- if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { +- int ret; +- ret = etrax_rh_unlink_urb(urb); +- DBFEXIT; +- restore_flags(flags); +- return ret; +- +- } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { +- +- dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb); +- +- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { +- /* The EP was enabled, disable it and wait. */ +- TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); +- +- /* Ah, the luxury of busy-wait. */ +- while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid])); +- } +- /* Kicking dummy list out of the party. */ +- TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { +- +- dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb); +- +- if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { +- /* The EP was enabled, disable it and wait. */ +- TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); +- +- /* Ah, the luxury of busy-wait. */ +- while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid])); +- } +- +- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { +- +- dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb); +- +- /* Separate function because it's a tad more complicated. */ +- etrax_usb_unlink_intr_urb(urb); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- +- dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb); +- +- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { +- /* The EP was enabled, disable it and wait. */ +- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); +- +- /* Ah, the luxury of busy-wait. */ +- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); +- } +- } +- +- /* Note that we need to remove the urb from the urb list *before* removing its SB +- descriptors. (This means that the isoc eof handler might get a null urb when we +- are unlinking the last urb.) */ +- +- if (usb_pipetype(urb->pipe) == PIPE_BULK) { +- +- urb_list_del(urb, epid); +- TxBulkEPList[epid].sub = 0; +- etrax_remove_from_sb_list(urb); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { +- +- urb_list_del(urb, epid); +- TxCtrlEPList[epid].sub = 0; +- etrax_remove_from_sb_list(urb); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { +- +- urb_list_del(urb, epid); +- /* Sanity check (should never happen). */ +- assert(urb_list_empty(epid)); +- +- /* Release allocated bandwidth. */ +- usb_release_bandwidth(urb->dev, urb, 0); +- +- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- +- if (usb_pipeout(urb->pipe)) { +- +- USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb; +- +- if (__urb_list_entry(urb, epid)) { +- +- urb_list_del(urb, epid); +- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; +- prev_sb = 0; +- while (iter_sb && (iter_sb != urb_priv->first_sb)) { +- prev_sb = iter_sb; +- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; +- } +- +- if (iter_sb == 0) { +- /* Unlink of the URB currently being transmitted. */ +- prev_sb = 0; +- iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; +- } +- +- while (iter_sb && (iter_sb != urb_priv->last_sb)) { +- iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; +- } +- if (iter_sb) { +- next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; +- } else { +- /* This should only happen if the DMA has completed +- processing the SB list for this EP while interrupts +- are disabled. */ +- dbg_isoc("Isoc urb not found, already sent?"); +- next_sb = 0; +- } +- if (prev_sb) { +- prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; +- } else { +- TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; +- } +- +- etrax_remove_from_sb_list(urb); +- if (urb_list_empty(epid)) { +- TxIsocEPList[epid].sub = 0; +- dbg_isoc("Last isoc out urb epid %d", epid); +- } else if (next_sb || prev_sb) { +- dbg_isoc("Re-enable isoc out epid %d", epid); +- +- TxIsocEPList[epid].hw_len = 0; +- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); +- } else { +- TxIsocEPList[epid].sub = 0; +- dbg_isoc("URB list non-empty and no SB list, EP disabled"); +- } +- } else { +- dbg_isoc("Urb 0x%p not found, completed already?", urb); +- } +- } else { +- +- urb_list_del(urb, epid); +- +- /* For in traffic there is only one SB descriptor for each EP even +- though there may be several urbs (all urbs point at the same SB). */ +- if (urb_list_empty(epid)) { +- /* No more urbs, remove the SB. */ +- TxIsocEPList[epid].sub = 0; +- etrax_remove_from_sb_list(urb); +- } else { +- TxIsocEPList[epid].hw_len = 0; +- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); +- } +- } +- /* Release allocated bandwidth. */ +- usb_release_bandwidth(urb->dev, urb, 1); +- } +- /* Free the epid if urb list is empty. */ +- if (urb_list_empty(epid)) { +- etrax_usb_free_epid(epid); +- } +- restore_flags(flags); +- +- /* Must be done before calling completion handler. */ +- kfree(urb_priv); +- urb->hcpriv = 0; +- +- if (urb->complete) { +- urb->complete(urb, NULL); +- } +- +- DBFEXIT; +- return 0; +-} +- +-static int etrax_usb_get_frame_number(struct usb_device *usb_dev) +-{ +- DBFENTER; +- DBFEXIT; +- return (*R_USB_FM_NUMBER & 0x7ff); +-} +- +-static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc) +-{ +- DBFENTER; +- +- /* This interrupt handler could be used when unlinking EP descriptors. */ +- +- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { +- USB_EP_Desc_t *ep; +- +- //dbg_bulk("dma8_sub0_descr (BULK) intr."); +- +- /* It should be safe clearing the interrupt here, since we don't expect to get a new +- one until we restart the bulk channel. */ +- *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); +- +- /* Wait while the DMA is running (though we don't expect it to be). */ +- while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)); +- +- /* Advance the DMA to the next EP descriptor. */ +- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); +- +- //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep); +- +- /* ep->next is already a physical address; no need for a virt_to_phys. */ +- *R_DMA_CH8_SUB0_EP = ep->next; +- +- /* Start the DMA bulk channel again. */ +- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); +- } +- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { +- struct urb *urb; +- int epid; +- etrax_urb_priv_t *urb_priv; +- unsigned long int flags; +- +- dbg_ctrl("dma8_sub1_descr (CTRL) intr."); +- *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); +- +- /* The complete callback gets called so we cli. */ +- save_flags(flags); +- cli(); +- +- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { +- if ((TxCtrlEPList[epid].sub == 0) || +- (epid == DUMMY_EPID) || +- (epid == INVALID_EPID)) { +- /* Nothing here to see. */ +- continue; +- } +- +- /* Get the first urb (if any). */ +- urb = urb_list_first(epid); +- +- if (urb) { +- +- /* Sanity check. */ +- assert(usb_pipetype(urb->pipe) == PIPE_CONTROL); +- +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) { +- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); +- +- etrax_usb_complete_urb(urb, 0); +- } +- } +- } +- restore_flags(flags); +- } +- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { +- dbg_intr("dma8_sub2_descr (INTR) intr."); +- *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); +- } +- if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { +- struct urb *urb; +- int epid; +- int epid_done; +- etrax_urb_priv_t *urb_priv; +- USB_SB_Desc_t *sb_desc; +- +- usb_isoc_complete_data_t *comp_data = NULL; +- +- /* One or more isoc out transfers are done. */ +- dbg_isoc("dma8_sub3_descr (ISOC) intr."); +- +- /* For each isoc out EP search for the first sb_desc with the intr flag +- set. This descriptor must be the last packet from an URB. Then +- traverse the URB list for the EP until the URB with urb_priv->last_sb +- matching the intr-marked sb_desc is found. All URBs before this have +- been sent. +- */ +- +- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { +- /* Skip past epids with no SB lists, epids used for in traffic, +- and special (dummy, invalid) epids. */ +- if ((TxIsocEPList[epid].sub == 0) || +- (test_bit(epid, (void *)&epid_out_traffic) == 0) || +- (epid == DUMMY_EPID) || +- (epid == INVALID_EPID)) { +- /* Nothing here to see. */ +- continue; +- } +- sb_desc = phys_to_virt(TxIsocEPList[epid].sub); +- +- /* Find the last descriptor of the currently active URB for this ep. +- This is the first descriptor in the sub list marked for a descriptor +- interrupt. */ +- while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { +- sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; +- } +- assert(sb_desc); +- +- dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p", +- epid, +- phys_to_virt(TxIsocEPList[epid].sub), +- sb_desc); +- +- epid_done = 0; +- +- /* Get the first urb (if any). */ +- urb = urb_list_first(epid); +- assert(urb); +- +- while (urb && !epid_done) { +- +- /* Sanity check. */ +- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); +- +- if (!usb_pipeout(urb->pipe)) { +- /* descr interrupts are generated only for out pipes. */ +- epid_done = 1; +- continue; +- } +- +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- if (sb_desc != urb_priv->last_sb) { +- +- /* This urb has been sent. */ +- dbg_isoc("out URB 0x%p sent", urb); +- +- urb_priv->urb_state = TRANSFER_DONE; +- +- } else if ((sb_desc == urb_priv->last_sb) && +- !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { +- +- assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes)); +- assert(sb_desc->next == 0); +- +- dbg_isoc("out URB 0x%p last in list, epid disabled", urb); +- TxIsocEPList[epid].sub = 0; +- TxIsocEPList[epid].hw_len = 0; +- urb_priv->urb_state = TRANSFER_DONE; +- +- epid_done = 1; +- +- } else { +- epid_done = 1; +- } +- if (!epid_done) { +- urb = urb_list_next(urb, epid); +- } +- } +- +- } +- +- *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); +- +- comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); +- assert(comp_data != NULL); +- +- INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data); +- schedule_work(&comp_data->usb_bh); +- } +- +- DBFEXIT; +- return IRQ_HANDLED; +-} +- +-static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data) +-{ +- usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data; +- +- struct urb *urb; +- int epid; +- int epid_done; +- etrax_urb_priv_t *urb_priv; +- +- DBFENTER; +- +- dbg_isoc("dma8_sub3_descr (ISOC) bottom half."); +- +- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { +- unsigned long flags; +- +- save_flags(flags); +- cli(); +- +- epid_done = 0; +- +- /* The descriptor interrupt handler has marked all transmitted isoch. out +- URBs with TRANSFER_DONE. Now we traverse all epids and for all that +- have isoch. out traffic traverse its URB list and complete the +- transmitted URB. +- */ +- +- while (!epid_done) { +- +- /* Get the first urb (if any). */ +- urb = urb_list_first(epid); +- if (urb == 0) { +- epid_done = 1; +- continue; +- } +- +- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { +- epid_done = 1; +- continue; +- } +- +- if (!usb_pipeout(urb->pipe)) { +- /* descr interrupts are generated only for out pipes. */ +- epid_done = 1; +- continue; +- } +- +- dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub); +- +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- if (urb_priv->urb_state == TRANSFER_DONE) { +- int i; +- struct usb_iso_packet_descriptor *packet; +- +- /* This urb has been sent. */ +- dbg_isoc("Completing isoc out URB 0x%p", urb); +- +- for (i = 0; i < urb->number_of_packets; i++) { +- packet = &urb->iso_frame_desc[i]; +- packet->status = 0; +- packet->actual_length = packet->length; +- } +- +- etrax_usb_complete_isoc_urb(urb, 0); +- +- if (urb_list_empty(epid)) { +- etrax_usb_free_epid(epid); +- epid_done = 1; +- } +- } else { +- epid_done = 1; +- } +- } +- restore_flags(flags); +- +- } +- kmem_cache_free(isoc_compl_cache, comp_data); +- +- DBFEXIT; +-} +- +- +- +-static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc) +-{ +- struct urb *urb; +- etrax_urb_priv_t *urb_priv; +- int epid = 0; +- unsigned long flags; +- +- /* Isoc diagnostics. */ +- static int curr_fm = 0; +- static int prev_fm = 0; +- +- DBFENTER; +- +- /* Clear this interrupt. */ +- *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); +- +- /* Note that this while loop assumes that all packets span only +- one rx descriptor. */ +- +- /* The reason we cli here is that we call the driver's callback functions. */ +- save_flags(flags); +- cli(); +- +- while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { +- +- epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); +- urb = urb_list_first(epid); +- +- //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb); +- +- if (!urb) { +- err("No urb for epid %d in rx interrupt", epid); +- __dump_ept_data(epid); +- goto skip_out; +- } +- +- /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since +- ctrl pipes are not. */ +- +- if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { +- __u32 r_usb_ept_data; +- int no_error = 0; +- +- assert(test_bit(epid, (void *)&epid_usage_bitmask)); +- +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- r_usb_ept_data = *R_USB_EPT_DATA_ISO; +- +- if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && +- (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && +- (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { +- /* Not an error, just a failure to receive an expected iso +- in packet in this frame. This is not documented +- in the designers reference. +- */ +- no_error++; +- } else { +- warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data); +- } +- } else { +- r_usb_ept_data = *R_USB_EPT_DATA; +- warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data); +- } +- +- if (!no_error){ +- warn("error in rx desc->status, epid %d, first urb = 0x%lx", +- epid, (unsigned long)urb); +- __dump_in_desc(myNextRxDesc); +- +- warn("R_USB_STATUS = 0x%x", *R_USB_STATUS); +- +- /* Check that ept was disabled when error occurred. */ +- switch (usb_pipetype(urb->pipe)) { +- case PIPE_BULK: +- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); +- break; +- case PIPE_CONTROL: +- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); +- break; +- case PIPE_INTERRUPT: +- assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable))); +- break; +- case PIPE_ISOCHRONOUS: +- assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))); +- break; +- default: +- warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p", +- usb_pipetype(urb->pipe), +- urb); +- } +- etrax_usb_complete_urb(urb, -EPROTO); +- goto skip_out; +- } +- } +- +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- if ((usb_pipetype(urb->pipe) == PIPE_BULK) || +- (usb_pipetype(urb->pipe) == PIPE_CONTROL) || +- (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { +- +- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { +- /* We get nodata for empty data transactions, and the rx descriptor's +- hw_len field is not valid in that case. No data to copy in other +- words. */ +- } else { +- /* Make sure the data fits in the buffer. */ +- assert(urb_priv->rx_offset + myNextRxDesc->hw_len +- <= urb->transfer_buffer_length); +- +- memcpy(urb->transfer_buffer + urb_priv->rx_offset, +- phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); +- urb_priv->rx_offset += myNextRxDesc->hw_len; +- } +- +- if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { +- if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) && +- ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) == +- IO_STATE(USB_EP_command, enable, yes))) { +- /* The EP is still enabled, so the OUT packet used to ack +- the in data is probably not processed yet. If the EP +- sub pointer has not moved beyond urb_priv->last_sb mark +- it for a descriptor interrupt and complete the urb in +- the descriptor interrupt handler. +- */ +- USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0; +- +- while ((sub != NULL) && (sub != urb_priv->last_sb)) { +- sub = sub->next ? phys_to_virt(sub->next) : 0; +- } +- if (sub != NULL) { +- /* The urb has not been fully processed. */ +- urb_priv->urb_state = WAITING_FOR_DESCR_INTR; +- } else { +- warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub); +- etrax_usb_complete_urb(urb, 0); +- } +- } else { +- etrax_usb_complete_urb(urb, 0); +- } +- } +- +- } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- +- struct usb_iso_packet_descriptor *packet; +- +- if (urb_priv->urb_state == UNLINK) { +- info("Ignoring rx data for urb being unlinked."); +- goto skip_out; +- } else if (urb_priv->urb_state == NOT_STARTED) { +- info("What? Got rx data for urb that isn't started?"); +- goto skip_out; +- } +- +- packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; +- packet->status = 0; +- +- if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { +- /* We get nodata for empty data transactions, and the rx descriptor's +- hw_len field is not valid in that case. We copy 0 bytes however to +- stay in synch. */ +- packet->actual_length = 0; +- } else { +- packet->actual_length = myNextRxDesc->hw_len; +- /* Make sure the data fits in the buffer. */ +- assert(packet->actual_length <= packet->length); +- memcpy(urb->transfer_buffer + packet->offset, +- phys_to_virt(myNextRxDesc->buf), packet->actual_length); +- } +- +- /* Increment the packet counter. */ +- urb_priv->isoc_packet_counter++; +- +- /* Note that we don't care about the eot field in the rx descriptor's status. +- It will always be set for isoc traffic. */ +- if (urb->number_of_packets == urb_priv->isoc_packet_counter) { +- +- /* Out-of-synch diagnostics. */ +- curr_fm = (*R_USB_FM_NUMBER & 0x7ff); +- if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) { +- /* This test is wrong, if there is more than one isoc +- in endpoint active it will always calculate wrong +- since prev_fm is shared by all endpoints. +- +- FIXME Make this check per URB using urb->start_frame. +- */ +- dbg_isoc("Out of synch? Previous frame = %d, current frame = %d", +- prev_fm, curr_fm); +- +- } +- prev_fm = curr_fm; +- +- /* Complete the urb with status OK. */ +- etrax_usb_complete_isoc_urb(urb, 0); +- } +- } +- +- skip_out: +- +- /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr +- has the same layout as USB_IN_Desc for the relevant fields.) */ +- prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc); +- +- myPrevRxDesc = myNextRxDesc; +- myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol); +- myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); +- myLastRxDesc = myPrevRxDesc; +- +- myNextRxDesc->status = 0; +- myNextRxDesc = phys_to_virt(myNextRxDesc->next); +- } +- +- restore_flags(flags); +- +- DBFEXIT; +- +- return IRQ_HANDLED; +-} +- +- +-/* This function will unlink the SB descriptors associated with this urb. */ +-static int etrax_remove_from_sb_list(struct urb *urb) +-{ +- USB_SB_Desc_t *next_sb, *first_sb, *last_sb; +- etrax_urb_priv_t *urb_priv; +- int i = 0; +- +- DBFENTER; +- +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor +- doesn't really need to be disabled, it's just that we expect it to be. */ +- if (usb_pipetype(urb->pipe) == PIPE_BULK) { +- assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); +- } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { +- assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); +- } +- +- first_sb = urb_priv->first_sb; +- last_sb = urb_priv->last_sb; +- +- assert(first_sb); +- assert(last_sb); +- +- while (first_sb != last_sb) { +- next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next); +- kmem_cache_free(usb_desc_cache, first_sb); +- first_sb = next_sb; +- i++; +- } +- kmem_cache_free(usb_desc_cache, last_sb); +- i++; +- dbg_sb("%d SB descriptors freed", i); +- /* Compare i with urb->number_of_packets for Isoc traffic. +- Should be same when calling unlink_urb */ +- +- DBFEXIT; +- +- return i; +-} +- +-static int etrax_usb_submit_bulk_urb(struct urb *urb) +-{ +- int epid; +- int empty; +- unsigned long flags; +- etrax_urb_priv_t *urb_priv; +- +- DBFENTER; +- +- /* Epid allocation, empty check and list add must be protected. +- Read about this in etrax_usb_submit_ctrl_urb. */ +- +- spin_lock_irqsave(&urb_list_lock, flags); +- epid = etrax_usb_setup_epid(urb); +- if (epid == -1) { +- DBFEXIT; +- spin_unlock_irqrestore(&urb_list_lock, flags); +- return -ENOMEM; +- } +- empty = urb_list_empty(epid); +- urb_list_add(urb, epid); +- spin_unlock_irqrestore(&urb_list_lock, flags); +- +- dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d", +- usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid); +- +- /* Mark the urb as being in progress. */ +- urb->status = -EINPROGRESS; +- +- /* Setup the hcpriv data. */ +- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); +- assert(urb_priv != NULL); +- /* This sets rx_offset to 0. */ +- urb_priv->urb_state = NOT_STARTED; +- urb->hcpriv = urb_priv; +- +- if (empty) { +- etrax_usb_add_to_bulk_sb_list(urb, epid); +- } +- +- DBFEXIT; +- +- return 0; +-} +- +-static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid) +-{ +- USB_SB_Desc_t *sb_desc; +- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- unsigned long flags; +- char maxlen; +- +- DBFENTER; +- +- dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb); +- +- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); +- +- sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- assert(sb_desc != NULL); +- memset(sb_desc, 0, sizeof(USB_SB_Desc_t)); +- +- +- if (usb_pipeout(urb->pipe)) { +- +- dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid); +- +- /* This is probably a sanity check of the bulk transaction length +- not being larger than 64 kB. */ +- if (urb->transfer_buffer_length > 0xffff) { +- panic("urb->transfer_buffer_length > 0xffff"); +- } +- +- sb_desc->sw_len = urb->transfer_buffer_length; +- +- /* The rem field is don't care if it's not a full-length transfer, so setting +- it shouldn't hurt. Also, rem isn't used for OUT traffic. */ +- sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, out) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- /* The full field is set to yes, even if we don't actually check that this is +- a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0). +- Setting full prevents the USB controller from sending an empty packet in +- that case. However, if URB_ZERO_PACKET was set we want that. */ +- if (!(urb->transfer_flags & URB_ZERO_PACKET)) { +- sb_desc->command |= IO_STATE(USB_SB_command, full, yes); +- } +- +- sb_desc->buf = virt_to_phys(urb->transfer_buffer); +- sb_desc->next = 0; +- +- } else if (usb_pipein(urb->pipe)) { +- +- dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid); +- +- sb_desc->sw_len = urb->transfer_buffer_length ? +- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; +- +- /* The rem field is don't care if it's not a full-length transfer, so setting +- it shouldn't hurt. */ +- sb_desc->command = +- (IO_FIELD(USB_SB_command, rem, +- urb->transfer_buffer_length % maxlen) | +- IO_STATE(USB_SB_command, tt, in) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- sb_desc->buf = 0; +- sb_desc->next = 0; +- } +- +- urb_priv->first_sb = sb_desc; +- urb_priv->last_sb = sb_desc; +- urb_priv->epid = epid; +- +- urb->hcpriv = urb_priv; +- +- /* Reset toggle bits and reset error count. */ +- save_flags(flags); +- cli(); +- +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- +- /* FIXME: Is this a special case since the hold field is checked, +- or should we check hold in a lot of other cases as well? */ +- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { +- panic("Hold was set in %s", __FUNCTION__); +- } +- +- /* Reset error counters (regardless of which direction this traffic is). */ +- *R_USB_EPT_DATA &= +- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | +- IO_MASK(R_USB_EPT_DATA, error_count_out)); +- +- /* Software must preset the toggle bits. */ +- if (usb_pipeout(urb->pipe)) { +- char toggle = +- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); +- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); +- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); +- } else { +- char toggle = +- usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); +- *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); +- *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); +- } +- +- /* Assert that the EP descriptor is disabled. */ +- assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); +- +- /* The reason we set the EP's sub pointer directly instead of +- walking the SB list and linking it last in the list is that we only +- have one active urb at a time (the rest are queued). */ +- +- /* Note that we cannot have interrupts running when we have set the SB descriptor +- but the EP is not yet enabled. If a bulk eot happens for another EP, we will +- find this EP disabled and with a SB != 0, which will make us think that it's done. */ +- TxBulkEPList[epid].sub = virt_to_phys(sb_desc); +- TxBulkEPList[epid].hw_len = 0; +- /* Note that we don't have to fill in the ep_id field since this +- was done when we allocated the EP descriptors in init_tx_bulk_ep. */ +- +- /* Check if the dummy list is already with us (if several urbs were queued). */ +- if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) { +- +- dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d", +- (unsigned long)urb, epid); +- +- /* The last EP in the dummy list already has its next pointer set to +- TxBulkEPList[epid].next. */ +- +- /* We don't need to check if the DMA is at this EP or not before changing the +- next pointer, since we will do it in one 32-bit write (EP descriptors are +- 32-bit aligned). */ +- TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); +- } +- /* Enable the EP descr. */ +- dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid); +- TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); +- +- /* Everything is set up, safe to enable interrupts again. */ +- restore_flags(flags); +- +- /* If the DMA bulk channel isn't running, we need to restart it if it +- has stopped at the last EP descriptor (DMA stopped because there was +- no more traffic) or if it has stopped at a dummy EP with the intr flag +- set (DMA stopped because we were too slow in inserting new traffic). */ +- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { +- +- USB_EP_Desc_t *ep; +- ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); +- dbg_bulk("DMA channel not running in add"); +- dbg_bulk("DMA is at 0x%lx", (unsigned long)ep); +- +- if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) || +- (ep->command & 0x8) >> 3) { +- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); +- /* Update/restart the bulk start timer since we just started the channel. */ +- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); +- /* Update/restart the bulk eot timer since we just inserted traffic. */ +- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); +- } +- } +- +- DBFEXIT; +-} +- +-static void etrax_usb_complete_bulk_urb(struct urb *urb, int status) +-{ +- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- int epid = urb_priv->epid; +- unsigned long flags; +- +- DBFENTER; +- +- if (status) +- warn("Completing bulk urb with status %d.", status); +- +- dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid); +- +- /* Update the urb list. */ +- urb_list_del(urb, epid); +- +- /* For an IN pipe, we always set the actual length, regardless of whether there was +- an error or not (which means the device driver can use the data if it wants to). */ +- if (usb_pipein(urb->pipe)) { +- urb->actual_length = urb_priv->rx_offset; +- } else { +- /* Set actual_length for OUT urbs also; the USB mass storage driver seems +- to want that. We wouldn't know of any partial writes if there was an error. */ +- if (status == 0) { +- urb->actual_length = urb->transfer_buffer_length; +- } else { +- urb->actual_length = 0; +- } +- } +- +- /* FIXME: Is there something of the things below we shouldn't do if there was an error? +- Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */ +- +- save_flags(flags); +- cli(); +- +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- +- /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */ +- if (usb_pipeout(urb->pipe)) { +- char toggle = +- IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); +- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), +- usb_pipeout(urb->pipe), toggle); +- } else { +- char toggle = +- IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); +- usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), +- usb_pipeout(urb->pipe), toggle); +- } +- restore_flags(flags); +- +- /* Remember to free the SBs. */ +- etrax_remove_from_sb_list(urb); +- kfree(urb_priv); +- urb->hcpriv = 0; +- +- /* If there are any more urb's in the list we'd better start sending */ +- if (!urb_list_empty(epid)) { +- +- struct urb *new_urb; +- +- /* Get the first urb. */ +- new_urb = urb_list_first(epid); +- assert(new_urb); +- +- dbg_bulk("More bulk for epid %d", epid); +- +- etrax_usb_add_to_bulk_sb_list(new_urb, epid); +- } +- +- urb->status = status; +- +- /* We let any non-zero status from the layer above have precedence. */ +- if (status == 0) { +- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) +- is to be treated as an error. */ +- if (urb->transfer_flags & URB_SHORT_NOT_OK) { +- if (usb_pipein(urb->pipe) && +- (urb->actual_length != +- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { +- urb->status = -EREMOTEIO; +- } +- } +- } +- +- if (urb->complete) { +- urb->complete(urb, NULL); +- } +- +- if (urb_list_empty(epid)) { +- /* This means that this EP is now free, deconfigure it. */ +- etrax_usb_free_epid(epid); +- +- /* No more traffic; time to clean up. +- Must set sub pointer to 0, since we look at the sub pointer when handling +- the bulk eot interrupt. */ +- +- dbg_bulk("No bulk for epid %d", epid); +- +- TxBulkEPList[epid].sub = 0; +- +- /* Unlink the dummy list. */ +- +- dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d", +- (unsigned long)urb, epid); +- +- /* No need to wait for the DMA before changing the next pointer. +- The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use +- the last one (INVALID_EPID) for actual traffic. */ +- TxBulkEPList[epid].next = +- virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); +- } +- +- DBFEXIT; +-} +- +-static int etrax_usb_submit_ctrl_urb(struct urb *urb) +-{ +- int epid; +- int empty; +- unsigned long flags; +- etrax_urb_priv_t *urb_priv; +- +- DBFENTER; +- +- /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */ +- +- /* Epid allocation, empty check and list add must be protected. +- +- Epid allocation because if we find an existing epid for this endpoint an urb might be +- completed (emptying the list) before we add the new urb to the list, causing the epid +- to be de-allocated. We would then start the transfer with an invalid epid -> epid attn. +- +- Empty check and add because otherwise we might conclude that the list is not empty, +- after which it becomes empty before we add the new urb to the list, causing us not to +- insert the new traffic into the SB list. */ +- +- spin_lock_irqsave(&urb_list_lock, flags); +- epid = etrax_usb_setup_epid(urb); +- if (epid == -1) { +- spin_unlock_irqrestore(&urb_list_lock, flags); +- DBFEXIT; +- return -ENOMEM; +- } +- empty = urb_list_empty(epid); +- urb_list_add(urb, epid); +- spin_unlock_irqrestore(&urb_list_lock, flags); +- +- dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d", +- (unsigned long)urb, empty ? "empty" : "", epid); +- +- /* Mark the urb as being in progress. */ +- urb->status = -EINPROGRESS; +- +- /* Setup the hcpriv data. */ +- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); +- assert(urb_priv != NULL); +- /* This sets rx_offset to 0. */ +- urb_priv->urb_state = NOT_STARTED; +- urb->hcpriv = urb_priv; +- +- if (empty) { +- etrax_usb_add_to_ctrl_sb_list(urb, epid); +- } +- +- DBFEXIT; +- +- return 0; +-} +- +-static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid) +-{ +- USB_SB_Desc_t *sb_desc_setup; +- USB_SB_Desc_t *sb_desc_data; +- USB_SB_Desc_t *sb_desc_status; +- +- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- +- unsigned long flags; +- char maxlen; +- +- DBFENTER; +- +- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); +- +- sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- assert(sb_desc_setup != NULL); +- sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- assert(sb_desc_status != NULL); +- +- /* Initialize the mandatory setup SB descriptor (used only in control transfers) */ +- sb_desc_setup->sw_len = 8; +- sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, setup) | +- IO_STATE(USB_SB_command, full, yes) | +- IO_STATE(USB_SB_command, eot, yes)); +- +- sb_desc_setup->buf = virt_to_phys(urb->setup_packet); +- +- if (usb_pipeout(urb->pipe)) { +- dbg_ctrl("Transfer for epid %d is OUT", epid); +- +- /* If this Control OUT transfer has an optional data stage we add an OUT token +- before the mandatory IN (status) token, hence the reordered SB list */ +- +- sb_desc_setup->next = virt_to_phys(sb_desc_status); +- if (urb->transfer_buffer) { +- +- dbg_ctrl("This OUT transfer has an extra data stage"); +- +- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- assert(sb_desc_data != NULL); +- +- sb_desc_setup->next = virt_to_phys(sb_desc_data); +- +- sb_desc_data->sw_len = urb->transfer_buffer_length; +- sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) | +- IO_STATE(USB_SB_command, full, yes) | +- IO_STATE(USB_SB_command, eot, yes)); +- sb_desc_data->buf = virt_to_phys(urb->transfer_buffer); +- sb_desc_data->next = virt_to_phys(sb_desc_status); +- } +- +- sb_desc_status->sw_len = 1; +- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, in) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, intr, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- sb_desc_status->buf = 0; +- sb_desc_status->next = 0; +- +- } else if (usb_pipein(urb->pipe)) { +- +- dbg_ctrl("Transfer for epid %d is IN", epid); +- dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length); +- dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen); +- +- sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- assert(sb_desc_data != NULL); +- +- sb_desc_setup->next = virt_to_phys(sb_desc_data); +- +- sb_desc_data->sw_len = urb->transfer_buffer_length ? +- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; +- dbg_ctrl("sw_len got %d", sb_desc_data->sw_len); +- +- sb_desc_data->command = +- (IO_FIELD(USB_SB_command, rem, +- urb->transfer_buffer_length % maxlen) | +- IO_STATE(USB_SB_command, tt, in) | +- IO_STATE(USB_SB_command, eot, yes)); +- +- sb_desc_data->buf = 0; +- sb_desc_data->next = virt_to_phys(sb_desc_status); +- +- /* Read comment at zout_buffer declaration for an explanation to this. */ +- sb_desc_status->sw_len = 1; +- sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, zout) | +- IO_STATE(USB_SB_command, full, yes) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, intr, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- sb_desc_status->buf = virt_to_phys(&zout_buffer[0]); +- sb_desc_status->next = 0; +- } +- +- urb_priv->first_sb = sb_desc_setup; +- urb_priv->last_sb = sb_desc_status; +- urb_priv->epid = epid; +- +- urb_priv->urb_state = STARTED; +- +- /* Reset toggle bits and reset error count, remember to di and ei */ +- /* Warning: it is possible that this locking doesn't work with bottom-halves */ +- +- save_flags(flags); +- cli(); +- +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { +- panic("Hold was set in %s", __FUNCTION__); +- } +- +- +- /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits +- are set to a specific value. Why the difference? Read "Transfer and Toggle Bits +- in Designer's Reference, p. 8 - 11. */ +- *R_USB_EPT_DATA &= +- ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | +- IO_MASK(R_USB_EPT_DATA, error_count_out) | +- IO_MASK(R_USB_EPT_DATA, t_in) | +- IO_MASK(R_USB_EPT_DATA, t_out)); +- +- /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now +- (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */ +- restore_flags(flags); +- +- /* Assert that the EP descriptor is disabled. */ +- assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); +- +- /* Set up and enable the EP descriptor. */ +- TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup); +- TxCtrlEPList[epid].hw_len = 0; +- TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); +- +- /* We start the DMA sub channel without checking if it's running or not, because: +- 1) If it's already running, issuing the start command is a nop. +- 2) We avoid a test-and-set race condition. */ +- *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); +- +- DBFEXIT; +-} +- +-static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status) +-{ +- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- int epid = urb_priv->epid; +- +- DBFENTER; +- +- if (status) +- warn("Completing ctrl urb with status %d.", status); +- +- dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb); +- +- /* Remove this urb from the list. */ +- urb_list_del(urb, epid); +- +- /* For an IN pipe, we always set the actual length, regardless of whether there was +- an error or not (which means the device driver can use the data if it wants to). */ +- if (usb_pipein(urb->pipe)) { +- urb->actual_length = urb_priv->rx_offset; +- } +- +- /* FIXME: Is there something of the things below we shouldn't do if there was an error? +- Like, maybe we shouldn't insert more traffic. */ +- +- /* Remember to free the SBs. */ +- etrax_remove_from_sb_list(urb); +- kfree(urb_priv); +- urb->hcpriv = 0; +- +- /* If there are any more urbs in the list we'd better start sending. */ +- if (!urb_list_empty(epid)) { +- struct urb *new_urb; +- +- /* Get the first urb. */ +- new_urb = urb_list_first(epid); +- assert(new_urb); +- +- dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb); +- +- etrax_usb_add_to_ctrl_sb_list(new_urb, epid); +- } +- +- urb->status = status; +- +- /* We let any non-zero status from the layer above have precedence. */ +- if (status == 0) { +- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) +- is to be treated as an error. */ +- if (urb->transfer_flags & URB_SHORT_NOT_OK) { +- if (usb_pipein(urb->pipe) && +- (urb->actual_length != +- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { +- urb->status = -EREMOTEIO; +- } +- } +- } +- +- if (urb->complete) { +- urb->complete(urb, NULL); +- } +- +- if (urb_list_empty(epid)) { +- /* No more traffic. Time to clean up. */ +- etrax_usb_free_epid(epid); +- /* Must set sub pointer to 0. */ +- dbg_ctrl("No ctrl for epid %d", epid); +- TxCtrlEPList[epid].sub = 0; +- } +- +- DBFEXIT; +-} +- +-static int etrax_usb_submit_intr_urb(struct urb *urb) +-{ +- +- int epid; +- +- DBFENTER; +- +- if (usb_pipeout(urb->pipe)) { +- /* Unsupported transfer type. +- We don't support interrupt out traffic. (If we do, we can't support +- intervals for neither in or out traffic, but are forced to schedule all +- interrupt traffic in one frame.) */ +- return -EINVAL; +- } +- +- epid = etrax_usb_setup_epid(urb); +- if (epid == -1) { +- DBFEXIT; +- return -ENOMEM; +- } +- +- if (!urb_list_empty(epid)) { +- /* There is already a queued urb for this endpoint. */ +- etrax_usb_free_epid(epid); +- return -ENXIO; +- } +- +- urb->status = -EINPROGRESS; +- +- dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid); +- +- urb_list_add(urb, epid); +- etrax_usb_add_to_intr_sb_list(urb, epid); +- +- return 0; +- +- DBFEXIT; +-} +- +-static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid) +-{ +- +- volatile USB_EP_Desc_t *tmp_ep; +- volatile USB_EP_Desc_t *first_ep; +- +- char maxlen; +- int interval; +- int i; +- +- etrax_urb_priv_t *urb_priv; +- +- DBFENTER; +- +- maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); +- interval = urb->interval; +- +- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); +- assert(urb_priv != NULL); +- urb->hcpriv = urb_priv; +- +- first_ep = &TxIntrEPList[0]; +- +- /* Round of the interval to 2^n, it is obvious that this code favours +- smaller numbers, but that is actually a good thing */ +- /* FIXME: The "rounding error" for larger intervals will be quite +- large. For in traffic this shouldn't be a problem since it will only +- mean that we "poll" more often. */ +- for (i = 0; interval; i++) { +- interval = interval >> 1; +- } +- interval = 1 << (i - 1); +- +- dbg_intr("Interval rounded to %d", interval); +- +- tmp_ep = first_ep; +- i = 0; +- do { +- if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { +- if ((i % interval) == 0) { +- /* Insert the traffic ep after tmp_ep */ +- USB_EP_Desc_t *ep_desc; +- USB_SB_Desc_t *sb_desc; +- +- dbg_intr("Inserting EP for epid %d", epid); +- +- ep_desc = (USB_EP_Desc_t *) +- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- sb_desc = (USB_SB_Desc_t *) +- kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); +- assert(ep_desc != NULL); +- CHECK_ALIGN(ep_desc); +- assert(sb_desc != NULL); +- +- ep_desc->sub = virt_to_phys(sb_desc); +- ep_desc->hw_len = 0; +- ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | +- IO_STATE(USB_EP_command, enable, yes)); +- +- +- /* Round upwards the number of packets of size maxlen +- that this SB descriptor should receive. */ +- sb_desc->sw_len = urb->transfer_buffer_length ? +- (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; +- sb_desc->next = 0; +- sb_desc->buf = 0; +- sb_desc->command = +- (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | +- IO_STATE(USB_SB_command, tt, in) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- ep_desc->next = tmp_ep->next; +- tmp_ep->next = virt_to_phys(ep_desc); +- } +- i++; +- } +- tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); +- } while (tmp_ep != first_ep); +- +- +- /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */ +- urb_priv->epid = epid; +- +- /* We start the DMA sub channel without checking if it's running or not, because: +- 1) If it's already running, issuing the start command is a nop. +- 2) We avoid a test-and-set race condition. */ +- *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); +- +- DBFEXIT; +-} +- +- +- +-static void etrax_usb_complete_intr_urb(struct urb *urb, int status) +-{ +- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- int epid = urb_priv->epid; +- +- DBFENTER; +- +- if (status) +- warn("Completing intr urb with status %d.", status); +- +- dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb); +- +- urb->status = status; +- urb->actual_length = urb_priv->rx_offset; +- +- dbg_intr("interrupt urb->actual_length = %d", urb->actual_length); +- +- /* We let any non-zero status from the layer above have precedence. */ +- if (status == 0) { +- /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) +- is to be treated as an error. */ +- if (urb->transfer_flags & URB_SHORT_NOT_OK) { +- if (urb->actual_length != +- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { +- urb->status = -EREMOTEIO; +- } +- } +- } +- +- /* The driver will resubmit the URB so we need to remove it first */ +- etrax_usb_unlink_urb(urb, 0); +- if (urb->complete) { +- urb->complete(urb, NULL); +- } +- +- DBFEXIT; +-} +- +- +-static int etrax_usb_submit_isoc_urb(struct urb *urb) +-{ +- int epid; +- unsigned long flags; +- +- DBFENTER; +- +- dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb); +- +- /* Epid allocation, empty check and list add must be protected. +- Read about this in etrax_usb_submit_ctrl_urb. */ +- +- spin_lock_irqsave(&urb_list_lock, flags); +- /* Is there an active epid for this urb ? */ +- epid = etrax_usb_setup_epid(urb); +- if (epid == -1) { +- DBFEXIT; +- spin_unlock_irqrestore(&urb_list_lock, flags); +- return -ENOMEM; +- } +- +- /* Ok, now we got valid endpoint, lets insert some traffic */ +- +- urb->status = -EINPROGRESS; +- +- /* Find the last urb in the URB_List and add this urb after that one. +- Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This +- is important to make this in "real time" since isochronous traffic is +- time sensitive. */ +- +- dbg_isoc("Adding isoc urb to (possibly empty) list"); +- urb_list_add(urb, epid); +- etrax_usb_add_to_isoc_sb_list(urb, epid); +- spin_unlock_irqrestore(&urb_list_lock, flags); +- +- DBFEXIT; +- +- return 0; +-} +- +-static void etrax_usb_check_error_isoc_ep(const int epid) +-{ +- unsigned long int flags; +- int error_code; +- __u32 r_usb_ept_data; +- +- /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof, +- bulk_eot and epid_attn interrupts. So we just check the status of +- the epid without testing if for it in R_USB_EPID_ATTN. */ +- +- +- save_flags(flags); +- cli(); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO +- registers, they are located at the same address and are of the same size. +- In other words, this read should be ok for isoc also. */ +- r_usb_ept_data = *R_USB_EPT_DATA; +- restore_flags(flags); +- +- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); +- +- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { +- warn("Hold was set for epid %d.", epid); +- return; +- } +- +- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) { +- +- /* This indicates that the SB list of the ept was completed before +- new data was appended to it. This is not an error, but indicates +- large system or USB load and could possibly cause trouble for +- very timing sensitive USB device drivers so we log it. +- */ +- info("Isoc. epid %d disabled with no error", epid); +- return; +- +- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) { +- /* Not really a protocol error, just says that the endpoint gave +- a stall response. Note that error_code cannot be stall for isoc. */ +- panic("Isoc traffic cannot stall"); +- +- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) { +- /* Two devices responded to a transaction request. Must be resolved +- by software. FIXME: Reset ports? */ +- panic("Bus error for epid %d." +- " Two devices responded to transaction request", +- epid); +- +- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { +- /* DMA overrun or underrun. */ +- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); +- +- /* It seems that error_code = buffer_error in +- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS +- are the same error. */ +- } +-} +- +- +-static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid) +-{ +- +- int i = 0; +- +- etrax_urb_priv_t *urb_priv; +- USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc; +- +- DBFENTER; +- +- prev_sb_desc = next_sb_desc = temp_sb_desc = NULL; +- +- urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC); +- assert(urb_priv != NULL); +- +- urb->hcpriv = urb_priv; +- urb_priv->epid = epid; +- +- if (usb_pipeout(urb->pipe)) { +- +- if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n"); +- +- dbg_isoc("Transfer for epid %d is OUT", epid); +- dbg_isoc("%d packets in URB", urb->number_of_packets); +- +- /* Create one SB descriptor for each packet and link them together. */ +- for (i = 0; i < urb->number_of_packets; i++) { +- if (!urb->iso_frame_desc[i].length) +- continue; +- +- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC); +- assert(next_sb_desc != NULL); +- +- if (urb->iso_frame_desc[i].length > 0) { +- +- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) | +- IO_STATE(USB_SB_command, eot, yes)); +- +- next_sb_desc->sw_len = urb->iso_frame_desc[i].length; +- next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset); +- +- /* Check if full length transfer. */ +- if (urb->iso_frame_desc[i].length == +- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { +- next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes); +- } +- } else { +- dbg_isoc("zero len packet"); +- next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | +- IO_STATE(USB_SB_command, tt, zout) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, full, yes)); +- +- next_sb_desc->sw_len = 1; +- next_sb_desc->buf = virt_to_phys(&zout_buffer[0]); +- } +- +- /* First SB descriptor that belongs to this urb */ +- if (i == 0) +- urb_priv->first_sb = next_sb_desc; +- else +- prev_sb_desc->next = virt_to_phys(next_sb_desc); +- +- prev_sb_desc = next_sb_desc; +- } +- +- next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- next_sb_desc->next = 0; +- urb_priv->last_sb = next_sb_desc; +- +- } else if (usb_pipein(urb->pipe)) { +- +- dbg_isoc("Transfer for epid %d is IN", epid); +- dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length); +- dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length); +- +- /* Note that in descriptors for periodic traffic are not consumed. This means that +- the USB controller never propagates in the SB list. In other words, if there already +- is an SB descriptor in the list for this EP we don't have to do anything. */ +- if (TxIsocEPList[epid].sub == 0) { +- dbg_isoc("Isoc traffic not already running, allocating SB"); +- +- next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_ATOMIC); +- assert(next_sb_desc != NULL); +- +- next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) | +- IO_STATE(USB_SB_command, eot, yes) | +- IO_STATE(USB_SB_command, eol, yes)); +- +- next_sb_desc->next = 0; +- next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant +- for periodic in traffic as long as it is more +- than zero. Set to 1 always. */ +- next_sb_desc->buf = 0; +- +- /* The rem field is don't care for isoc traffic, so we don't set it. */ +- +- /* Only one SB descriptor that belongs to this urb. */ +- urb_priv->first_sb = next_sb_desc; +- urb_priv->last_sb = next_sb_desc; +- +- } else { +- +- dbg_isoc("Isoc traffic already running, just setting first/last_sb"); +- +- /* Each EP for isoc in will have only one SB descriptor, setup when submitting the +- already active urb. Note that even though we may have several first_sb/last_sb +- pointing at the same SB descriptor, they are freed only once (when the list has +- become empty). */ +- urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub); +- urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub); +- return; +- } +- +- } +- +- /* Find the spot to insert this urb and add it. */ +- if (TxIsocEPList[epid].sub == 0) { +- /* First SB descriptor inserted in this list (in or out). */ +- dbg_isoc("Inserting SB desc first in list"); +- TxIsocEPList[epid].hw_len = 0; +- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); +- +- } else { +- /* Isochronous traffic is already running, insert new traffic last (only out). */ +- dbg_isoc("Inserting SB desc last in list"); +- temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); +- while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != +- IO_STATE(USB_SB_command, eol, yes)) { +- assert(temp_sb_desc->next); +- temp_sb_desc = phys_to_virt(temp_sb_desc->next); +- } +- dbg_isoc("Appending list on desc 0x%p", temp_sb_desc); +- +- /* Next pointer must be set before eol is removed. */ +- temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); +- /* Clear the previous end of list flag since there is a new in the +- added SB descriptor list. */ +- temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); +- +- if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { +- /* 8.8.5 in Designer's Reference says we should check for and correct +- any errors in the EP here. That should not be necessary if epid_attn +- is handled correctly, so we assume all is ok. */ +- dbg_isoc("EP disabled"); +- etrax_usb_check_error_isoc_ep(epid); +- +- /* The SB list was exhausted. */ +- if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { +- /* The new sublist did not get processed before the EP was +- disabled. Setup the EP again. */ +- dbg_isoc("Set EP sub to new list"); +- TxIsocEPList[epid].hw_len = 0; +- TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); +- } +- } +- } +- +- if (urb->transfer_flags & URB_ISO_ASAP) { +- /* The isoc transfer should be started as soon as possible. The start_frame +- field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER +- with a USB Chief trace shows that the first isoc IN token is sent 2 frames +- later. I'm not sure how this affects usage of the start_frame field by the +- device driver, or how it affects things when USB_ISO_ASAP is not set, so +- therefore there's no compensation for the 2 frame "lag" here. */ +- urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); +- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); +- urb_priv->urb_state = STARTED; +- dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame); +- } else { +- /* Not started yet. */ +- urb_priv->urb_state = NOT_STARTED; +- dbg_isoc("urb_priv->urb_state set to NOT_STARTED"); +- } +- +- /* We start the DMA sub channel without checking if it's running or not, because: +- 1) If it's already running, issuing the start command is a nop. +- 2) We avoid a test-and-set race condition. */ +- *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); +- +- DBFEXIT; +-} +- +-static void etrax_usb_complete_isoc_urb(struct urb *urb, int status) +-{ +- etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- int epid = urb_priv->epid; +- int auto_resubmit = 0; +- +- DBFENTER; +- dbg_isoc("complete urb 0x%p, status %d", urb, status); +- +- if (status) +- warn("Completing isoc urb with status %d.", status); +- +- if (usb_pipein(urb->pipe)) { +- int i; +- +- /* Make that all isoc packets have status and length set before +- completing the urb. */ +- for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) { +- urb->iso_frame_desc[i].actual_length = 0; +- urb->iso_frame_desc[i].status = -EPROTO; +- } +- +- urb_list_del(urb, epid); +- +- if (!list_empty(&urb_list[epid])) { +- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; +- } else { +- unsigned long int flags; +- if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { +- /* The EP was enabled, disable it and wait. */ +- TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); +- +- /* Ah, the luxury of busy-wait. */ +- while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); +- } +- +- etrax_remove_from_sb_list(urb); +- TxIsocEPList[epid].sub = 0; +- TxIsocEPList[epid].hw_len = 0; +- +- save_flags(flags); +- cli(); +- etrax_usb_free_epid(epid); +- restore_flags(flags); +- } +- +- urb->hcpriv = 0; +- kfree(urb_priv); +- +- /* Release allocated bandwidth. */ +- usb_release_bandwidth(urb->dev, urb, 0); +- } else if (usb_pipeout(urb->pipe)) { +- int freed_descr; +- +- dbg_isoc("Isoc out urb complete 0x%p", urb); +- +- /* Update the urb list. */ +- urb_list_del(urb, epid); +- +- freed_descr = etrax_remove_from_sb_list(urb); +- dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets); +- assert(freed_descr == urb->number_of_packets); +- urb->hcpriv = 0; +- kfree(urb_priv); +- +- /* Release allocated bandwidth. */ +- usb_release_bandwidth(urb->dev, urb, 0); +- } +- +- urb->status = status; +- if (urb->complete) { +- urb->complete(urb, NULL); +- } +- +- if (auto_resubmit) { +- /* Check that urb was not unlinked by the complete callback. */ +- if (__urb_list_entry(urb, epid)) { +- /* Move this one down the list. */ +- urb_list_move_last(urb, epid); +- +- /* Mark the now first urb as started (may already be). */ +- ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; +- +- /* Must set this to 0 since this urb is still active after +- completion. */ +- urb_priv->isoc_packet_counter = 0; +- } else { +- warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb); +- } +- } +- +- DBFEXIT; +-} +- +-static void etrax_usb_complete_urb(struct urb *urb, int status) +-{ +- switch (usb_pipetype(urb->pipe)) { +- case PIPE_BULK: +- etrax_usb_complete_bulk_urb(urb, status); +- break; +- case PIPE_CONTROL: +- etrax_usb_complete_ctrl_urb(urb, status); +- break; +- case PIPE_INTERRUPT: +- etrax_usb_complete_intr_urb(urb, status); +- break; +- case PIPE_ISOCHRONOUS: +- etrax_usb_complete_isoc_urb(urb, status); +- break; +- default: +- err("Unknown pipetype"); +- } +-} +- +- +- +-static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc) +-{ +- usb_interrupt_registers_t *reg; +- unsigned long flags; +- __u32 irq_mask; +- __u8 status; +- __u32 epid_attn; +- __u16 port_status_1; +- __u16 port_status_2; +- __u32 fm_number; +- +- DBFENTER; +- +- /* Read critical registers into local variables, do kmalloc afterwards. */ +- save_flags(flags); +- cli(); +- +- irq_mask = *R_USB_IRQ_MASK_READ; +- /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS +- must be read before R_USB_EPID_ATTN since reading the latter clears the +- ourun and perror fields of R_USB_STATUS. */ +- status = *R_USB_STATUS; +- +- /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */ +- epid_attn = *R_USB_EPID_ATTN; +- +- /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the +- port_status interrupt. */ +- port_status_1 = *R_USB_RH_PORT_STATUS_1; +- port_status_2 = *R_USB_RH_PORT_STATUS_2; +- +- /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ +- /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */ +- fm_number = *R_USB_FM_NUMBER; +- +- restore_flags(flags); +- +- reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, SLAB_ATOMIC); +- +- assert(reg != NULL); +- +- reg->hc = (etrax_hc_t *)vhc; +- +- /* Now put register values into kmalloc'd area. */ +- reg->r_usb_irq_mask_read = irq_mask; +- reg->r_usb_status = status; +- reg->r_usb_epid_attn = epid_attn; +- reg->r_usb_rh_port_status_1 = port_status_1; +- reg->r_usb_rh_port_status_2 = port_status_2; +- reg->r_usb_fm_number = fm_number; +- +- INIT_WORK(®->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg); +- schedule_work(®->usb_bh); +- +- DBFEXIT; +- +- return IRQ_HANDLED; +-} +- +-static void etrax_usb_hc_interrupt_bottom_half(void *data) +-{ +- usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data; +- __u32 irq_mask = reg->r_usb_irq_mask_read; +- +- DBFENTER; +- +- /* Interrupts are handled in order of priority. */ +- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { +- etrax_usb_hc_epid_attn_interrupt(reg); +- } +- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { +- etrax_usb_hc_port_status_interrupt(reg); +- } +- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { +- etrax_usb_hc_ctl_status_interrupt(reg); +- } +- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { +- etrax_usb_hc_isoc_eof_interrupt(); +- } +- if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { +- /* Update/restart the bulk start timer since obviously the channel is running. */ +- mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); +- /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */ +- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); +- +- etrax_usb_hc_bulk_eot_interrupt(0); +- } +- +- kmem_cache_free(top_half_reg_cache, reg); +- +- DBFEXIT; +-} +- +- +-void etrax_usb_hc_isoc_eof_interrupt(void) +-{ +- struct urb *urb; +- etrax_urb_priv_t *urb_priv; +- int epid; +- unsigned long flags; +- +- DBFENTER; +- +- /* Do not check the invalid epid (it has a valid sub pointer). */ +- for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { +- +- /* Do not check the invalid epid (it has a valid sub pointer). */ +- if ((epid == DUMMY_EPID) || (epid == INVALID_EPID)) +- continue; +- +- /* Disable interrupts to block the isoc out descriptor interrupt handler +- from being called while the isoc EPID list is being checked. +- */ +- save_flags(flags); +- cli(); +- +- if (TxIsocEPList[epid].sub == 0) { +- /* Nothing here to see. */ +- restore_flags(flags); +- continue; +- } +- +- /* Get the first urb (if any). */ +- urb = urb_list_first(epid); +- if (urb == 0) { +- warn("Ignoring NULL urb"); +- restore_flags(flags); +- continue; +- } +- if (usb_pipein(urb->pipe)) { +- +- /* Sanity check. */ +- assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); +- +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- if (urb_priv->urb_state == NOT_STARTED) { +- +- /* If ASAP is not set and urb->start_frame is the current frame, +- start the transfer. */ +- if (!(urb->transfer_flags & URB_ISO_ASAP) && +- (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { +- +- dbg_isoc("Enabling isoc IN EP descr for epid %d", epid); +- TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); +- +- /* This urb is now active. */ +- urb_priv->urb_state = STARTED; +- continue; +- } +- } +- } +- restore_flags(flags); +- } +- +- DBFEXIT; +- +-} +- +-void etrax_usb_hc_bulk_eot_interrupt(int timer_induced) +-{ +- int epid; +- +- /* The technique is to run one urb at a time, wait for the eot interrupt at which +- point the EP descriptor has been disabled. */ +- +- DBFENTER; +- dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : ""); +- +- for (epid = 0; epid < NBR_OF_EPIDS; epid++) { +- +- if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && +- (TxBulkEPList[epid].sub != 0)) { +- +- struct urb *urb; +- etrax_urb_priv_t *urb_priv; +- unsigned long flags; +- __u32 r_usb_ept_data; +- +- /* Found a disabled EP descriptor which has a non-null sub pointer. +- Verify that this ctrl EP descriptor got disabled no errors. +- FIXME: Necessary to check error_code? */ +- dbg_bulk("for epid %d?", epid); +- +- /* Get the first urb. */ +- urb = urb_list_first(epid); +- +- /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of +- wrong unlinking? */ +- if (!urb) { +- warn("NULL urb for epid %d", epid); +- continue; +- } +- +- assert(urb); +- urb_priv = (etrax_urb_priv_t *)urb->hcpriv; +- assert(urb_priv); +- +- /* Sanity checks. */ +- assert(usb_pipetype(urb->pipe) == PIPE_BULK); +- if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { +- err("bulk endpoint got disabled before reaching last sb"); +- } +- +- /* For bulk IN traffic, there seems to be a race condition between +- between the bulk eot and eop interrupts, or rather an uncertainty regarding +- the order in which they happen. Normally we expect the eop interrupt from +- DMA channel 9 to happen before the eot interrupt. +- +- Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */ +- +- if (usb_pipein(urb->pipe)) { +- dbg_bulk("in urb, continuing"); +- continue; +- } +- +- save_flags(flags); +- cli(); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- r_usb_ept_data = *R_USB_EPT_DATA; +- restore_flags(flags); +- +- if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) == +- IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { +- /* This means that the endpoint has no error, is disabled +- and had inserted traffic, i.e. transfer successfully completed. */ +- etrax_usb_complete_bulk_urb(urb, 0); +- } else { +- /* Shouldn't happen. We expect errors to be caught by epid attention. */ +- err("Found disabled bulk EP desc, error_code != no_error"); +- } +- } +- } +- +- /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer. +- However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may +- not. Also, we might find two disabled EPs when handling an eot interrupt, and then find +- none the next time. */ +- +- DBFEXIT; +- +-} +- +-void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg) +-{ +- /* This function handles the epid attention interrupt. There are a variety of reasons +- for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details): +- +- invalid ep_id - Invalid epid in an EP (EP disabled). +- stall - Not strictly an error condition (EP disabled). +- 3rd error - Three successive transaction errors (EP disabled). +- buffer ourun - Buffer overrun or underrun (EP disabled). +- past eof1 - Intr or isoc transaction proceeds past EOF1. +- near eof - Intr or isoc transaction would not fit inside the frame. +- zout transfer - If zout transfer for a bulk endpoint (EP disabled). +- setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */ +- +- int epid; +- +- +- DBFENTER; +- +- assert(reg != NULL); +- +- /* Note that we loop through all epids. We still want to catch errors for +- the invalid one, even though we might handle them differently. */ +- for (epid = 0; epid < NBR_OF_EPIDS; epid++) { +- +- if (test_bit(epid, (void *)®->r_usb_epid_attn)) { +- +- struct urb *urb; +- __u32 r_usb_ept_data; +- unsigned long flags; +- int error_code; +- +- save_flags(flags); +- cli(); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); +- nop(); +- /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO +- registers, they are located at the same address and are of the same size. +- In other words, this read should be ok for isoc also. */ +- r_usb_ept_data = *R_USB_EPT_DATA; +- restore_flags(flags); +- +- /* First some sanity checks. */ +- if (epid == INVALID_EPID) { +- /* FIXME: What if it became disabled? Could seriously hurt interrupt +- traffic. (Use do_intr_recover.) */ +- warn("Got epid_attn for INVALID_EPID (%d).", epid); +- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); +- err("R_USB_STATUS = 0x%x", reg->r_usb_status); +- continue; +- } else if (epid == DUMMY_EPID) { +- /* We definitely don't care about these ones. Besides, they are +- always disabled, so any possible disabling caused by the +- epid attention interrupt is irrelevant. */ +- warn("Got epid_attn for DUMMY_EPID (%d).", epid); +- continue; +- } +- +- /* Get the first urb in the urb list for this epid. We blatantly assume +- that only the first urb could have caused the epid attention. +- (For bulk and ctrl, only one urb is active at any one time. For intr +- and isoc we remove them once they are completed.) */ +- urb = urb_list_first(epid); +- +- if (urb == NULL) { +- err("Got epid_attn for epid %i with no urb.", epid); +- err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); +- err("R_USB_STATUS = 0x%x", reg->r_usb_status); +- continue; +- } +- +- switch (usb_pipetype(urb->pipe)) { +- case PIPE_BULK: +- warn("Got epid attn for bulk endpoint, epid %d", epid); +- break; +- case PIPE_CONTROL: +- warn("Got epid attn for control endpoint, epid %d", epid); +- break; +- case PIPE_INTERRUPT: +- warn("Got epid attn for interrupt endpoint, epid %d", epid); +- break; +- case PIPE_ISOCHRONOUS: +- warn("Got epid attn for isochronous endpoint, epid %d", epid); +- break; +- } +- +- if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { +- if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { +- warn("Hold was set for epid %d.", epid); +- continue; +- } +- } +- +- /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and +- R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */ +- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); +- } else { +- error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data); +- } +- +- /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ +- if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { +- +- /* Isoc traffic doesn't have error_count_in/error_count_out. */ +- if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && +- (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 || +- IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) { +- /* 3rd error. */ +- warn("3rd error for epid %i", epid); +- etrax_usb_complete_urb(urb, -EPROTO); +- +- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { +- +- warn("Perror for epid %d", epid); +- +- if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { +- /* invalid ep_id */ +- panic("Perror because of invalid epid." +- " Deconfigured too early?"); +- } else { +- /* past eof1, near eof, zout transfer, setup transfer */ +- +- /* Dump the urb and the relevant EP descriptor list. */ +- +- __dump_urb(urb); +- __dump_ept_data(epid); +- __dump_ep_list(usb_pipetype(urb->pipe)); +- +- panic("Something wrong with DMA descriptor contents." +- " Too much traffic inserted?"); +- } +- } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { +- /* buffer ourun */ +- panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid); +- } +- +- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) { +- /* Not really a protocol error, just says that the endpoint gave +- a stall response. Note that error_code cannot be stall for isoc. */ +- if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { +- panic("Isoc traffic cannot stall"); +- } +- +- warn("Stall for epid %d", epid); +- etrax_usb_complete_urb(urb, -EPIPE); +- +- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) { +- /* Two devices responded to a transaction request. Must be resolved +- by software. FIXME: Reset ports? */ +- panic("Bus error for epid %d." +- " Two devices responded to transaction request", +- epid); +- +- } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { +- /* DMA overrun or underrun. */ +- warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); +- +- /* It seems that error_code = buffer_error in +- R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS +- are the same error. */ +- etrax_usb_complete_urb(urb, -EPROTO); +- } +- } +- } +- +- DBFEXIT; +- +-} +- +-void etrax_usb_bulk_start_timer_func(unsigned long dummy) +-{ +- +- /* We might enable an EP descriptor behind the current DMA position when it's about +- to decide that there are no more bulk traffic and it should stop the bulk channel. +- Therefore we periodically check if the bulk channel is stopped and there is an +- enabled bulk EP descriptor, in which case we start the bulk channel. */ +- dbg_bulk("bulk_start_timer timed out."); +- +- if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { +- int epid; +- +- dbg_bulk("Bulk DMA channel not running."); +- +- for (epid = 0; epid < NBR_OF_EPIDS; epid++) { +- if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { +- dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n", +- epid); +- *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); +- +- /* Restart the bulk eot timer since we just started the bulk channel. */ +- mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); +- +- /* No need to search any further. */ +- break; +- } +- } +- } else { +- dbg_bulk("Bulk DMA channel running."); +- } +-} +- +-void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg) +-{ +- etrax_hc_t *hc = reg->hc; +- __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1; +- __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2; +- +- DBFENTER; +- +- /* The Etrax RH does not include a wPortChange register, so this has to be handled in software +- (by saving the old port status value for comparison when the port status interrupt happens). +- See section 11.16.2.6.2 in the USB 1.1 spec for details. */ +- +- dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1); +- dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2); +- dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1); +- dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2); +- +- /* C_PORT_CONNECTION is set on any transition. */ +- hc->rh.wPortChange_1 |= +- ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) != +- (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ? +- (1 << RH_PORT_CONNECTION) : 0; +- +- hc->rh.wPortChange_2 |= +- ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) != +- (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ? +- (1 << RH_PORT_CONNECTION) : 0; +- +- /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when +- the port is disabled, not when it's enabled. */ +- hc->rh.wPortChange_1 |= +- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE)) +- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ? +- (1 << RH_PORT_ENABLE) : 0; +- +- hc->rh.wPortChange_2 |= +- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE)) +- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ? +- (1 << RH_PORT_ENABLE) : 0; +- +- /* C_PORT_SUSPEND is set to one when the device has transitioned out +- of the suspended state, i.e. when suspend goes from one to zero. */ +- hc->rh.wPortChange_1 |= +- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND)) +- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ? +- (1 << RH_PORT_SUSPEND) : 0; +- +- hc->rh.wPortChange_2 |= +- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND)) +- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ? +- (1 << RH_PORT_SUSPEND) : 0; +- +- +- /* C_PORT_RESET is set when reset processing on this port is complete. */ +- hc->rh.wPortChange_1 |= +- ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET)) +- && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ? +- (1 << RH_PORT_RESET) : 0; +- +- hc->rh.wPortChange_2 |= +- ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET)) +- && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ? +- (1 << RH_PORT_RESET) : 0; +- +- /* Save the new values for next port status change. */ +- hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1; +- hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2; +- +- dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1); +- dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2); +- +- DBFEXIT; +- +-} +- +-void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg) +-{ +- DBFENTER; +- +- /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB +- list for the corresponding epid? */ +- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { +- panic("USB controller got ourun."); +- } +- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { +- +- /* Before, etrax_usb_do_intr_recover was called on this epid if it was +- an interrupt pipe. I don't see how re-enabling all EP descriptors +- will help if there was a programming error. */ +- panic("USB controller got perror."); +- } +- +- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { +- /* We should never operate in device mode. */ +- panic("USB controller in device mode."); +- } +- +- /* These if-statements could probably be nested. */ +- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) { +- info("USB controller in host mode."); +- } +- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) { +- info("USB controller started."); +- } +- if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) { +- info("USB controller running."); +- } +- +- DBFEXIT; +- +-} +- +- +-static int etrax_rh_submit_urb(struct urb *urb) +-{ +- struct usb_device *usb_dev = urb->dev; +- etrax_hc_t *hc = usb_dev->bus->hcpriv; +- unsigned int pipe = urb->pipe; +- struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet; +- void *data = urb->transfer_buffer; +- int leni = urb->transfer_buffer_length; +- int len = 0; +- int stat = 0; +- +- __u16 bmRType_bReq; +- __u16 wValue; +- __u16 wIndex; +- __u16 wLength; +- +- DBFENTER; +- +- /* FIXME: What is this interrupt urb that is sent to the root hub? */ +- if (usb_pipetype (pipe) == PIPE_INTERRUPT) { +- dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval); +- hc->rh.urb = urb; +- hc->rh.send = 1; +- /* FIXME: We could probably remove this line since it's done +- in etrax_rh_init_int_timer. (Don't remove it from +- etrax_rh_init_int_timer though.) */ +- hc->rh.interval = urb->interval; +- etrax_rh_init_int_timer(urb); +- DBFEXIT; +- +- return 0; +- } +- +- bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8); +- wValue = le16_to_cpu(cmd->wValue); +- wIndex = le16_to_cpu(cmd->wIndex); +- wLength = le16_to_cpu(cmd->wLength); +- +- dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq); +- dbg_rh("wValue : 0x%04x (%d)", wValue, wValue); +- dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex); +- dbg_rh("wLength : 0x%04x (%d)", wLength, wLength); +- +- switch (bmRType_bReq) { +- +- /* Request Destination: +- without flags: Device, +- RH_INTERFACE: interface, +- RH_ENDPOINT: endpoint, +- RH_CLASS means HUB here, +- RH_OTHER | RH_CLASS almost ever means HUB_PORT here +- */ +- +- case RH_GET_STATUS: +- *(__u16 *) data = cpu_to_le16 (1); +- OK (2); +- +- case RH_GET_STATUS | RH_INTERFACE: +- *(__u16 *) data = cpu_to_le16 (0); +- OK (2); +- +- case RH_GET_STATUS | RH_ENDPOINT: +- *(__u16 *) data = cpu_to_le16 (0); +- OK (2); +- +- case RH_GET_STATUS | RH_CLASS: +- *(__u32 *) data = cpu_to_le32 (0); +- OK (4); /* hub power ** */ +- +- case RH_GET_STATUS | RH_OTHER | RH_CLASS: +- if (wIndex == 1) { +- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1); +- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1); +- } else if (wIndex == 2) { +- *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2); +- *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2); +- } else { +- dbg_rh("RH_GET_STATUS whith invalid wIndex!"); +- OK(0); +- } +- +- OK(4); +- +- case RH_CLEAR_FEATURE | RH_ENDPOINT: +- switch (wValue) { +- case (RH_ENDPOINT_STALL): +- OK (0); +- } +- break; +- +- case RH_CLEAR_FEATURE | RH_CLASS: +- switch (wValue) { +- case (RH_C_HUB_OVER_CURRENT): +- OK (0); /* hub power over current ** */ +- } +- break; +- +- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: +- switch (wValue) { +- case (RH_PORT_ENABLE): +- if (wIndex == 1) { +- +- dbg_rh("trying to do disable port 1"); +- +- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); +- +- while (hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)); +- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); +- dbg_rh("Port 1 is disabled"); +- +- } else if (wIndex == 2) { +- +- dbg_rh("trying to do disable port 2"); +- +- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); +- +- while (hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes)); +- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); +- dbg_rh("Port 2 is disabled"); +- +- } else { +- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE " +- "with invalid wIndex == %d!", wIndex); +- } +- +- OK (0); +- case (RH_PORT_SUSPEND): +- /* Opposite to suspend should be resume, so we'll do a resume. */ +- /* FIXME: USB 1.1, 11.16.2.2 says: +- "Clearing the PORT_SUSPEND feature causes a host-initiated resume +- on the specified port. If the port is not in the Suspended state, +- the hub should treat this request as a functional no-operation." +- Shouldn't we check if the port is in a suspended state before +- resuming? */ +- +- /* Make sure the controller isn't busy. */ +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- if (wIndex == 1) { +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, port1) | +- IO_STATE(R_USB_COMMAND, port_cmd, resume) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); +- } else if (wIndex == 2) { +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, port2) | +- IO_STATE(R_USB_COMMAND, port_cmd, resume) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); +- } else { +- dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND " +- "with invalid wIndex == %d!", wIndex); +- } +- +- OK (0); +- case (RH_PORT_POWER): +- OK (0); /* port power ** */ +- case (RH_C_PORT_CONNECTION): +- if (wIndex == 1) { +- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION); +- } else if (wIndex == 2) { +- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION); +- } else { +- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION " +- "with invalid wIndex == %d!", wIndex); +- } +- +- OK (0); +- case (RH_C_PORT_ENABLE): +- if (wIndex == 1) { +- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE); +- } else if (wIndex == 2) { +- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE); +- } else { +- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE " +- "with invalid wIndex == %d!", wIndex); +- } +- OK (0); +- case (RH_C_PORT_SUSPEND): +-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ +- OK (0); +- case (RH_C_PORT_OVER_CURRENT): +- OK (0); /* port power over current ** */ +- case (RH_C_PORT_RESET): +- if (wIndex == 1) { +- hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET); +- } else if (wIndex == 2) { +- hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET); +- } else { +- dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET " +- "with invalid index == %d!", wIndex); +- } +- +- OK (0); +- +- } +- break; +- +- case RH_SET_FEATURE | RH_OTHER | RH_CLASS: +- switch (wValue) { +- case (RH_PORT_SUSPEND): +- +- /* Make sure the controller isn't busy. */ +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- if (wIndex == 1) { +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, port1) | +- IO_STATE(R_USB_COMMAND, port_cmd, suspend) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); +- } else if (wIndex == 2) { +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, port2) | +- IO_STATE(R_USB_COMMAND, port_cmd, suspend) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); +- } else { +- dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND " +- "with invalid wIndex == %d!", wIndex); +- } +- +- OK (0); +- case (RH_PORT_RESET): +- if (wIndex == 1) { +- +- port_1_reset: +- dbg_rh("Doing reset of port 1"); +- +- /* Make sure the controller isn't busy. */ +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, port1) | +- IO_STATE(R_USB_COMMAND, port_cmd, reset) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); +- +- /* We must wait at least 10 ms for the device to recover. +- 15 ms should be enough. */ +- udelay(15000); +- +- /* Wait for reset bit to go low (should be done by now). */ +- while (hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)); +- +- /* If the port status is +- 1) connected and enabled then there is a device and everything is fine +- 2) neither connected nor enabled then there is no device, also fine +- 3) connected and not enabled then we try again +- (Yes, there are other port status combinations besides these.) */ +- +- if ((hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && +- (hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { +- dbg_rh("Connected device on port 1, but port not enabled?" +- " Trying reset again."); +- goto port_2_reset; +- } +- +- /* Diagnostic printouts. */ +- if ((hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) && +- (hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { +- dbg_rh("No connected device on port 1"); +- } else if ((hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && +- (hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) { +- dbg_rh("Connected device on port 1, port 1 enabled"); +- } +- +- } else if (wIndex == 2) { +- +- port_2_reset: +- dbg_rh("Doing reset of port 2"); +- +- /* Make sure the controller isn't busy. */ +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- /* Issue the reset command. */ +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, port2) | +- IO_STATE(R_USB_COMMAND, port_cmd, reset) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); +- +- /* We must wait at least 10 ms for the device to recover. +- 15 ms should be enough. */ +- udelay(15000); +- +- /* Wait for reset bit to go low (should be done by now). */ +- while (hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes)); +- +- /* If the port status is +- 1) connected and enabled then there is a device and everything is fine +- 2) neither connected nor enabled then there is no device, also fine +- 3) connected and not enabled then we try again +- (Yes, there are other port status combinations besides these.) */ +- +- if ((hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && +- (hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { +- dbg_rh("Connected device on port 2, but port not enabled?" +- " Trying reset again."); +- goto port_2_reset; +- } +- +- /* Diagnostic printouts. */ +- if ((hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) && +- (hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { +- dbg_rh("No connected device on port 2"); +- } else if ((hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && +- (hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) { +- dbg_rh("Connected device on port 2, port 2 enabled"); +- } +- +- } else { +- dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex); +- } +- +- /* Make sure the controller isn't busy. */ +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- /* If all enabled ports were disabled the host controller goes down into +- started mode, so we need to bring it back into the running state. +- (This is safe even if it's already in the running state.) */ +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, nop) | +- IO_STATE(R_USB_COMMAND, port_cmd, reset) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); +- +- dbg_rh("...Done"); +- OK(0); +- +- case (RH_PORT_POWER): +- OK (0); /* port power ** */ +- case (RH_PORT_ENABLE): +- /* There is no port enable command in the host controller, so if the +- port is already enabled, we do nothing. If not, we reset the port +- (with an ugly goto). */ +- +- if (wIndex == 1) { +- if (hc->rh.prev_wPortStatus_1 & +- IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) { +- goto port_1_reset; +- } +- } else if (wIndex == 2) { +- if (hc->rh.prev_wPortStatus_2 & +- IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) { +- goto port_2_reset; +- } +- } else { +- dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex); +- } +- OK (0); +- } +- break; +- +- case RH_SET_ADDRESS: +- hc->rh.devnum = wValue; +- dbg_rh("RH address set to: %d", hc->rh.devnum); +- OK (0); +- +- case RH_GET_DESCRIPTOR: +- switch ((wValue & 0xff00) >> 8) { +- case (0x01): /* device descriptor */ +- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength)); +- memcpy (data, root_hub_dev_des, len); +- OK (len); +- case (0x02): /* configuration descriptor */ +- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength)); +- memcpy (data, root_hub_config_des, len); +- OK (len); +- case (0x03): /* string descriptors */ +- len = usb_root_hub_string (wValue & 0xff, +- 0xff, "ETRAX 100LX", +- data, wLength); +- if (len > 0) { +- OK(min(leni, len)); +- } else { +- stat = -EPIPE; +- } +- +- } +- break; +- +- case RH_GET_DESCRIPTOR | RH_CLASS: +- root_hub_hub_des[2] = hc->rh.numports; +- len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength)); +- memcpy (data, root_hub_hub_des, len); +- OK (len); +- +- case RH_GET_CONFIGURATION: +- *(__u8 *) data = 0x01; +- OK (1); +- +- case RH_SET_CONFIGURATION: +- OK (0); +- +- default: +- stat = -EPIPE; +- } +- +- urb->actual_length = len; +- urb->status = stat; +- urb->dev = NULL; +- if (urb->complete) { +- urb->complete(urb, NULL); +- } +- DBFEXIT; +- +- return 0; +-} +- +-static void +-etrax_usb_bulk_eot_timer_func(unsigned long dummy) +-{ +- /* Because of a race condition in the top half, we might miss a bulk eot. +- This timer "simulates" a bulk eot if we don't get one for a while, hopefully +- correcting the situation. */ +- dbg_bulk("bulk_eot_timer timed out."); +- etrax_usb_hc_bulk_eot_interrupt(1); +-} +- +-static void* +-etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, +- unsigned mem_flags, dma_addr_t *dma) +-{ +- return kmalloc(size, mem_flags); +-} +- +-static void +-etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma) +-{ +- kfree(addr); +-} +- +- +-static struct device fake_device; +- +-static int __init etrax_usb_hc_init(void) +-{ +- static etrax_hc_t *hc; +- struct usb_bus *bus; +- struct usb_device *usb_rh; +- int i; +- +- DBFENTER; +- +- info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version); +- +- hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL); +- assert(hc != NULL); +- +- /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ +- /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate +- SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) == +- sizeof(USB_SB_Desc_t). */ +- +- usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0, +- SLAB_HWCACHE_ALIGN, 0, 0); +- assert(usb_desc_cache != NULL); +- +- top_half_reg_cache = kmem_cache_create("top_half_reg_cache", +- sizeof(usb_interrupt_registers_t), +- 0, SLAB_HWCACHE_ALIGN, 0, 0); +- assert(top_half_reg_cache != NULL); +- +- isoc_compl_cache = kmem_cache_create("isoc_compl_cache", +- sizeof(usb_isoc_complete_data_t), +- 0, SLAB_HWCACHE_ALIGN, 0, 0); +- assert(isoc_compl_cache != NULL); +- +- etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations); +- hc->bus = bus; +- bus->bus_name="ETRAX 100LX"; +- bus->hcpriv = hc; +- +- /* Initialize RH to the default address. +- And make sure that we have no status change indication */ +- hc->rh.numports = 2; /* The RH has two ports */ +- hc->rh.devnum = 1; +- hc->rh.wPortChange_1 = 0; +- hc->rh.wPortChange_2 = 0; +- +- /* Also initate the previous values to zero */ +- hc->rh.prev_wPortStatus_1 = 0; +- hc->rh.prev_wPortStatus_2 = 0; +- +- /* Initialize the intr-traffic flags */ +- /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */ +- hc->intr.sleeping = 0; +- hc->intr.wq = NULL; +- +- epid_usage_bitmask = 0; +- epid_out_traffic = 0; +- +- /* Mark the invalid epid as being used. */ +- set_bit(INVALID_EPID, (void *)&epid_usage_bitmask); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID); +- nop(); +- /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */ +- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) | +- IO_FIELD(R_USB_EPT_DATA, max_len, 1)); +- +- /* Mark the dummy epid as being used. */ +- set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask); +- *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID); +- nop(); +- *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) | +- IO_FIELD(R_USB_EPT_DATA, max_len, 1)); +- +- /* Initialize the urb list by initiating a head for each list. */ +- for (i = 0; i < NBR_OF_EPIDS; i++) { +- INIT_LIST_HEAD(&urb_list[i]); +- } +- spin_lock_init(&urb_list_lock); +- +- INIT_LIST_HEAD(&urb_unlink_list); +- +- +- /* Initiate the bulk start timer. */ +- init_timer(&bulk_start_timer); +- bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; +- bulk_start_timer.function = etrax_usb_bulk_start_timer_func; +- add_timer(&bulk_start_timer); +- +- +- /* Initiate the bulk eot timer. */ +- init_timer(&bulk_eot_timer); +- bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; +- bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func; +- add_timer(&bulk_eot_timer); +- +- /* Set up the data structures for USB traffic. Note that this must be done before +- any interrupt that relies on sane DMA list occurrs. */ +- init_rx_buffers(); +- init_tx_bulk_ep(); +- init_tx_ctrl_ep(); +- init_tx_intr_ep(); +- init_tx_isoc_ep(); +- +- device_initialize(&fake_device); +- kobject_set_name(&fake_device.kobj, "etrax_usb"); +- kobject_add(&fake_device.kobj); +- kobject_uevent(&fake_device.kobj, KOBJ_ADD); +- hc->bus->controller = &fake_device; +- usb_register_bus(hc->bus); +- +- *R_IRQ_MASK2_SET = +- /* Note that these interrupts are not used. */ +- IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | +- /* Sub channel 1 (ctrl) descr. interrupts are used. */ +- IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | +- IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | +- /* Sub channel 3 (isoc) descr. interrupts are used. */ +- IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); +- +- /* Note that the dma9_descr interrupt is not used. */ +- *R_IRQ_MASK2_SET = +- IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | +- IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); +- +- /* FIXME: Enable iso_eof only when isoc traffic is running. */ +- *R_USB_IRQ_MASK_SET = +- IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | +- IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | +- IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | +- IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | +- IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); +- +- +- if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0, +- "ETRAX 100LX built-in USB (HC)", hc)) { +- err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); +- etrax_usb_hc_cleanup(); +- DBFEXIT; +- return -1; +- } +- +- if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0, +- "ETRAX 100LX built-in USB (Rx)", hc)) { +- err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); +- etrax_usb_hc_cleanup(); +- DBFEXIT; +- return -1; +- } +- +- if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0, +- "ETRAX 100LX built-in USB (Tx)", hc)) { +- err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); +- etrax_usb_hc_cleanup(); +- DBFEXIT; +- return -1; +- } +- +- /* R_USB_COMMAND: +- USB commands in host mode. The fields in this register should all be +- written to in one write. Do not read-modify-write one field at a time. A +- write to this register will trigger events in the USB controller and an +- incomplete command may lead to unpredictable results, and in worst case +- even to a deadlock in the controller. +- (Note however that the busy field is read-only, so no need to write to it.) */ +- +- /* Check the busy bit before writing to R_USB_COMMAND. */ +- +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- /* Reset the USB interface. */ +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, nop) | +- IO_STATE(R_USB_COMMAND, port_cmd, reset) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); +- +- /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800), +- to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may +- allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation. +- +- While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK +- behaviour, it doesn't solve this problem. What happens is that a control transfer will not +- be interrupted in its data stage when PSTART happens (the point at which periodic traffic +- is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before +- PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done, +- there may be too little time left for an isochronous transfer, causing an epid attention +- interrupt due to perror. The work-around for this is to let the control transfers run at the +- end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't +- fit into the frame. However, since there will *always* be a control transfer at the beginning +- of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer +- which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to +- this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make +- sure that the periodic transfers that are inserted will always fit in the frame. +- +- The idea was suggested that a control transfer could be split up into several 8 byte transfers, +- so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this +- hasn't been implemented. +- +- The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra +- for possible bit stuffing. */ +- +- *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); +- +-#ifdef CONFIG_ETRAX_USB_HOST_PORT1 +- *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); +-#endif +- +-#ifdef CONFIG_ETRAX_USB_HOST_PORT2 +- *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); +-#endif +- +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- /* Configure the USB interface as a host controller. */ +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, nop) | +- IO_STATE(R_USB_COMMAND, port_cmd, reset) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); +- +- /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled +- sequence of resetting the ports. If we reset both ports now, and there are devices +- on both ports, we will get a bus error because both devices will answer the set address +- request. */ +- +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- /* Start processing of USB traffic. */ +- *R_USB_COMMAND = +- IO_STATE(R_USB_COMMAND, port_sel, nop) | +- IO_STATE(R_USB_COMMAND, port_cmd, reset) | +- IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); +- +- while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); +- +- usb_rh = usb_alloc_dev(NULL, hc->bus, 0); +- hc->bus->root_hub = usb_rh; +- usb_rh->state = USB_STATE_ADDRESS; +- usb_rh->speed = USB_SPEED_FULL; +- usb_rh->devnum = 1; +- hc->bus->devnum_next = 2; +- usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64); +- usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE); +- usb_new_device(usb_rh); +- +- DBFEXIT; +- +- return 0; +-} +- +-static void etrax_usb_hc_cleanup(void) +-{ +- DBFENTER; +- +- free_irq(ETRAX_USB_HC_IRQ, NULL); +- free_irq(ETRAX_USB_RX_IRQ, NULL); +- free_irq(ETRAX_USB_TX_IRQ, NULL); +- +- usb_deregister_bus(etrax_usb_bus); +- +- /* FIXME: call kmem_cache_destroy here? */ +- +- DBFEXIT; +-} + +-module_init(etrax_usb_hc_init); +-module_exit(etrax_usb_hc_cleanup); ++/* Module hooks */ ++module_init(module_hcd_init); ++module_exit(module_hcd_exit); +--- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.c 2007-02-26 20:58:29.000000000 +0100 +@@ -0,0 +1,4684 @@ ++/* ++ * ++ * ETRAX 100LX USB Host Controller Driver ++ * ++ * Copyright (C) 2005, 2006 Axis Communications AB ++ * ++ * Author: Konrad Eriksson <konrad.eriksson@axis.se> ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/moduleparam.h> ++#include <linux/spinlock.h> ++#include <linux/usb.h> ++#include <linux/platform_device.h> ++ ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/arch/dma.h> ++#include <asm/arch/io_interface_mux.h> ++ ++#include "../core/hcd.h" ++#include "../core/hub.h" ++#include "hc-crisv10.h" ++#include "hc-cris-dbg.h" ++ ++ ++/***************************************************************************/ ++/***************************************************************************/ ++/* Host Controller settings */ ++/***************************************************************************/ ++/***************************************************************************/ ++ ++#define VERSION "1.00" ++#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB" ++#define DESCRIPTION "ETRAX 100LX USB Host Controller" ++ ++#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR ++#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR ++#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR ++ ++/* Number of physical ports in Etrax 100LX */ ++#define USB_ROOT_HUB_PORTS 2 ++ ++const char hc_name[] = "hc-crisv10"; ++const char product_desc[] = DESCRIPTION; ++ ++/* The number of epids is, among other things, used for pre-allocating ++ ctrl, bulk and isoc EP descriptors (one for each epid). ++ Assumed to be > 1 when initiating the DMA lists. */ ++#define NBR_OF_EPIDS 32 ++ ++/* Support interrupt traffic intervals up to 128 ms. */ ++#define MAX_INTR_INTERVAL 128 ++ ++/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP ++ table must be "invalid". By this we mean that we shouldn't care about epid ++ attentions for this epid, or at least handle them differently from epid ++ attentions for "valid" epids. This define determines which one to use ++ (don't change it). */ ++#define INVALID_EPID 31 ++/* A special epid for the bulk dummys. */ ++#define DUMMY_EPID 30 ++ ++/* Module settings */ ++ ++MODULE_DESCRIPTION(DESCRIPTION); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Konrad Eriksson <konrad.eriksson@axis.se>"); ++ ++ ++/* Module parameters */ ++ ++/* 0 = No ports enabled ++ 1 = Only port 1 enabled (on board ethernet on devboard) ++ 2 = Only port 2 enabled (external connector on devboard) ++ 3 = Both ports enabled ++*/ ++static unsigned int ports = 3; ++module_param(ports, uint, S_IRUGO); ++MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use"); ++ ++ ++/***************************************************************************/ ++/***************************************************************************/ ++/* Shared global variables for this module */ ++/***************************************************************************/ ++/***************************************************************************/ ++ ++/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */ ++static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); ++ ++static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); ++ ++/* EP descriptor lists for period transfers. Must be 32-bit aligned. */ ++static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); ++static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4))); ++ ++static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); ++static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4))); ++ ++static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); ++ ++/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set, ++ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which ++ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the ++ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors ++ in each frame. */ ++static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); ++ ++/* List of URB pointers, where each points to the active URB for a epid. ++ For Bulk, Ctrl and Intr this means which URB that currently is added to ++ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as ++ URB has completed is the queue examined and the first URB in queue is ++ removed and moved to the activeUrbList while its state change to STARTED and ++ its transfer(s) gets added to DMA list (exception Isoc where URBs enter ++ state STARTED directly and added transfers added to DMA lists). */ ++static struct urb *activeUrbList[NBR_OF_EPIDS]; ++ ++/* Additional software state info for each epid */ ++static struct etrax_epid epid_state[NBR_OF_EPIDS]; ++ ++/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops ++ even if there is new data waiting to be processed */ ++static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); ++static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); ++ ++/* We want the start timer to expire before the eot timer, because the former ++ might start traffic, thus making it unnecessary for the latter to time ++ out. */ ++#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */ ++#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */ ++ ++/* Delay before a URB completion happen when it's scheduled to be delayed */ ++#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */ ++ ++/* Simplifying macros for checking software state info of a epid */ ++/* ----------------------------------------------------------------------- */ ++#define epid_inuse(epid) epid_state[epid].inuse ++#define epid_out_traffic(epid) epid_state[epid].out_traffic ++#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0) ++#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0) ++ ++ ++/***************************************************************************/ ++/***************************************************************************/ ++/* DEBUG FUNCTIONS */ ++/***************************************************************************/ ++/***************************************************************************/ ++/* Note that these functions are always available in their "__" variants, ++ for use in error situations. The "__" missing variants are controlled by ++ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */ ++static void __dump_urb(struct urb* purb) ++{ ++ struct crisv10_urb_priv *urb_priv = purb->hcpriv; ++ int urb_num = -1; ++ if(urb_priv) { ++ urb_num = urb_priv->urb_num; ++ } ++ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num); ++ printk("dev :0x%08lx\n", (unsigned long)purb->dev); ++ printk("pipe :0x%08x\n", purb->pipe); ++ printk("status :%d\n", purb->status); ++ printk("transfer_flags :0x%08x\n", purb->transfer_flags); ++ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); ++ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); ++ printk("actual_length :%d\n", purb->actual_length); ++ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); ++ printk("start_frame :%d\n", purb->start_frame); ++ printk("number_of_packets :%d\n", purb->number_of_packets); ++ printk("interval :%d\n", purb->interval); ++ printk("error_count :%d\n", purb->error_count); ++ printk("context :0x%08lx\n", (unsigned long)purb->context); ++ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); ++} ++ ++static void __dump_in_desc(volatile struct USB_IN_Desc *in) ++{ ++ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); ++ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); ++ printk(" command : 0x%04x\n", in->command); ++ printk(" next : 0x%08lx\n", in->next); ++ printk(" buf : 0x%08lx\n", in->buf); ++ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); ++ printk(" status : 0x%04x\n\n", in->status); ++} ++ ++static void __dump_sb_desc(volatile struct USB_SB_Desc *sb) ++{ ++ char tt = (sb->command & 0x30) >> 4; ++ char *tt_string; ++ ++ switch (tt) { ++ case 0: ++ tt_string = "zout"; ++ break; ++ case 1: ++ tt_string = "in"; ++ break; ++ case 2: ++ tt_string = "out"; ++ break; ++ case 3: ++ tt_string = "setup"; ++ break; ++ default: ++ tt_string = "unknown (weird)"; ++ } ++ ++ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb); ++ printk(" command:0x%04x (", sb->command); ++ printk("rem:%d ", (sb->command & 0x3f00) >> 8); ++ printk("full:%d ", (sb->command & 0x40) >> 6); ++ printk("tt:%d(%s) ", tt, tt_string); ++ printk("intr:%d ", (sb->command & 0x8) >> 3); ++ printk("eot:%d ", (sb->command & 0x2) >> 1); ++ printk("eol:%d)", sb->command & 0x1); ++ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len); ++ printk(" next:0x%08lx", sb->next); ++ printk(" buf:0x%08lx\n", sb->buf); ++} ++ ++ ++static void __dump_ep_desc(volatile struct USB_EP_Desc *ep) ++{ ++ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep); ++ printk(" command:0x%04x (", ep->command); ++ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8); ++ printk("enable:%d ", (ep->command & 0x10) >> 4); ++ printk("intr:%d ", (ep->command & 0x8) >> 3); ++ printk("eof:%d ", (ep->command & 0x2) >> 1); ++ printk("eol:%d)", ep->command & 0x1); ++ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len); ++ printk(" next:0x%08lx", ep->next); ++ printk(" sub:0x%08lx\n", ep->sub); ++} ++ ++static inline void __dump_ep_list(int pipe_type) ++{ ++ volatile struct USB_EP_Desc *ep; ++ volatile struct USB_EP_Desc *first_ep; ++ volatile struct USB_SB_Desc *sb; ++ ++ switch (pipe_type) ++ { ++ case PIPE_BULK: ++ first_ep = &TxBulkEPList[0]; ++ break; ++ case PIPE_CONTROL: ++ first_ep = &TxCtrlEPList[0]; ++ break; ++ case PIPE_INTERRUPT: ++ first_ep = &TxIntrEPList[0]; ++ break; ++ case PIPE_ISOCHRONOUS: ++ first_ep = &TxIsocEPList[0]; ++ break; ++ default: ++ warn("Cannot dump unknown traffic type"); ++ return; ++ } ++ ep = first_ep; ++ ++ printk("\n\nDumping EP list...\n\n"); ++ ++ do { ++ __dump_ep_desc(ep); ++ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ ++ sb = ep->sub ? phys_to_virt(ep->sub) : 0; ++ while (sb) { ++ __dump_sb_desc(sb); ++ sb = sb->next ? phys_to_virt(sb->next) : 0; ++ } ++ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next)); ++ ++ } while (ep != first_ep); ++} ++ ++static inline void __dump_ept_data(int epid) ++{ ++ unsigned long flags; ++ __u32 r_usb_ept_data; ++ ++ if (epid < 0 || epid > 31) { ++ printk("Cannot dump ept data for invalid epid %d\n", epid); ++ return; ++ } ++ ++ local_irq_save(flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); ++ nop(); ++ r_usb_ept_data = *R_USB_EPT_DATA; ++ local_irq_restore(flags); ++ ++ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); ++ if (r_usb_ept_data == 0) { ++ /* No need for more detailed printing. */ ++ return; ++ } ++ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); ++ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); ++ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); ++ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); ++ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); ++ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); ++ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); ++ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); ++ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); ++ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); ++ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); ++ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); ++} ++ ++static inline void __dump_ept_data_iso(int epid) ++{ ++ unsigned long flags; ++ __u32 ept_data; ++ ++ if (epid < 0 || epid > 31) { ++ printk("Cannot dump ept data for invalid epid %d\n", epid); ++ return; ++ } ++ ++ local_irq_save(flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); ++ nop(); ++ ept_data = *R_USB_EPT_DATA_ISO; ++ local_irq_restore(flags); ++ ++ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid); ++ if (ept_data == 0) { ++ /* No need for more detailed printing. */ ++ return; ++ } ++ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid, ++ ept_data)); ++ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port, ++ ept_data)); ++ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, ++ ept_data)); ++ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, ++ ept_data)); ++ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, ++ ept_data)); ++ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, ++ ept_data)); ++} ++ ++static inline void __dump_ept_data_list(void) ++{ ++ int i; ++ ++ printk("Dumping the whole R_USB_EPT_DATA list\n"); ++ ++ for (i = 0; i < 32; i++) { ++ __dump_ept_data(i); ++ } ++} ++ ++static void debug_epid(int epid) { ++ int i; ++ ++ if(epid_isoc(epid)) { ++ __dump_ept_data_iso(epid); ++ } else { ++ __dump_ept_data(epid); ++ } ++ ++ printk("Bulk:\n"); ++ for(i = 0; i < 32; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i])); ++ } ++ } ++ ++ printk("Ctrl:\n"); ++ for(i = 0; i < 32; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i])); ++ } ++ } ++ ++ printk("Intr:\n"); ++ for(i = 0; i < MAX_INTR_INTERVAL; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i])); ++ } ++ } ++ ++ printk("Isoc:\n"); ++ for(i = 0; i < 32; i++) { ++ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) == ++ epid) { ++ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i])); ++ } ++ } ++ ++ __dump_ept_data_list(); ++ __dump_ep_list(PIPE_INTERRUPT); ++ printk("\n\n"); ++} ++ ++ ++ ++char* hcd_status_to_str(__u8 bUsbStatus) { ++ static char hcd_status_str[128]; ++ hcd_status_str[0] = '\0'; ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) { ++ strcat(hcd_status_str, "ourun "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) { ++ strcat(hcd_status_str, "perror "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) { ++ strcat(hcd_status_str, "device_mode "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) { ++ strcat(hcd_status_str, "host_mode "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) { ++ strcat(hcd_status_str, "started "); ++ } ++ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) { ++ strcat(hcd_status_str, "running "); ++ } ++ return hcd_status_str; ++} ++ ++ ++char* sblist_to_str(struct USB_SB_Desc* sb_desc) { ++ static char sblist_to_str_buff[128]; ++ char tmp[32], tmp2[32]; ++ sblist_to_str_buff[0] = '\0'; ++ while(sb_desc != NULL) { ++ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) { ++ case 0: sprintf(tmp, "zout"); break; ++ case 1: sprintf(tmp, "in"); break; ++ case 2: sprintf(tmp, "out"); break; ++ case 3: sprintf(tmp, "setup"); break; ++ } ++ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len); ++ strcat(sblist_to_str_buff, tmp2); ++ if(sb_desc->next != 0) { ++ sb_desc = phys_to_virt(sb_desc->next); ++ } else { ++ sb_desc = NULL; ++ } ++ } ++ return sblist_to_str_buff; ++} ++ ++char* port_status_to_str(__u16 wPortStatus) { ++ static char port_status_str[128]; ++ port_status_str[0] = '\0'; ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) { ++ strcat(port_status_str, "connected "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) { ++ strcat(port_status_str, "enabled "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) { ++ strcat(port_status_str, "suspended "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) { ++ strcat(port_status_str, "reset "); ++ } ++ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) { ++ strcat(port_status_str, "full-speed "); ++ } else { ++ strcat(port_status_str, "low-speed "); ++ } ++ return port_status_str; ++} ++ ++ ++char* endpoint_to_str(struct usb_endpoint_descriptor *ed) { ++ static char endpoint_to_str_buff[128]; ++ char tmp[32]; ++ int epnum = ed->bEndpointAddress & 0x0F; ++ int dir = ed->bEndpointAddress & 0x80; ++ int type = ed->bmAttributes & 0x03; ++ endpoint_to_str_buff[0] = '\0'; ++ sprintf(endpoint_to_str_buff, "ep:%d ", epnum); ++ switch(type) { ++ case 0: ++ sprintf(tmp, " ctrl"); ++ break; ++ case 1: ++ sprintf(tmp, " isoc"); ++ break; ++ case 2: ++ sprintf(tmp, " bulk"); ++ break; ++ case 3: ++ sprintf(tmp, " intr"); ++ break; ++ } ++ strcat(endpoint_to_str_buff, tmp); ++ if(dir) { ++ sprintf(tmp, " in"); ++ } else { ++ sprintf(tmp, " out"); ++ } ++ strcat(endpoint_to_str_buff, tmp); ++ ++ return endpoint_to_str_buff; ++} ++ ++/* Debug helper functions for Transfer Controller */ ++char* pipe_to_str(unsigned int pipe) { ++ static char pipe_to_str_buff[128]; ++ char tmp[64]; ++ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe)); ++ sprintf(tmp, " type:%s", str_type(pipe)); ++ strcat(pipe_to_str_buff, tmp); ++ ++ sprintf(tmp, " dev:%d", usb_pipedevice(pipe)); ++ strcat(pipe_to_str_buff, tmp); ++ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe)); ++ strcat(pipe_to_str_buff, tmp); ++ return pipe_to_str_buff; ++} ++ ++ ++#define USB_DEBUG_DESC 1 ++ ++#ifdef USB_DEBUG_DESC ++#define dump_in_desc(x) __dump_in_desc(x) ++#define dump_sb_desc(...) __dump_sb_desc(...) ++#define dump_ep_desc(x) __dump_ep_desc(x) ++#define dump_ept_data(x) __dump_ept_data(x) ++#else ++#define dump_in_desc(...) do {} while (0) ++#define dump_sb_desc(...) do {} while (0) ++#define dump_ep_desc(...) do {} while (0) ++#endif ++ ++ ++/* Uncomment this to enable massive function call trace ++ #define USB_DEBUG_TRACE */ ++ ++#ifdef USB_DEBUG_TRACE ++#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) ++#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) ++#else ++#define DBFENTER do {} while (0) ++#define DBFEXIT do {} while (0) ++#endif ++ ++#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ ++{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} ++ ++/* Most helpful debugging aid */ ++#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__)))) ++ ++ ++/***************************************************************************/ ++/***************************************************************************/ ++/* Forward declarations */ ++/***************************************************************************/ ++/***************************************************************************/ ++void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg); ++void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg); ++void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg); ++void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg); ++ ++void rh_port_status_change(__u16[]); ++int rh_clear_port_feature(__u8, __u16); ++int rh_set_port_feature(__u8, __u16); ++static void rh_disable_port(unsigned int port); ++ ++static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, ++ int timer); ++ ++static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, ++ int mem_flags); ++static void tc_free_epid(struct usb_host_endpoint *ep); ++static int tc_allocate_epid(void); ++static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status); ++static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, ++ int status); ++ ++static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, ++ int mem_flags); ++static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb); ++ ++static inline struct urb *urb_list_first(int epid); ++static inline void urb_list_add(struct urb *urb, int epid, ++ int mem_flags); ++static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid); ++static inline void urb_list_del(struct urb *urb, int epid); ++static inline void urb_list_move_last(struct urb *urb, int epid); ++static inline struct urb *urb_list_next(struct urb *urb, int epid); ++ ++int create_sb_for_urb(struct urb *urb, int mem_flags); ++int init_intr_urb(struct urb *urb, int mem_flags); ++ ++static inline void etrax_epid_set(__u8 index, __u32 data); ++static inline void etrax_epid_clear_error(__u8 index); ++static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, ++ __u8 toggle); ++static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout); ++static inline __u32 etrax_epid_get(__u8 index); ++ ++/* We're accessing the same register position in Etrax so ++ when we do full access the internal difference doesn't matter */ ++#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data) ++#define etrax_epid_iso_get(index) etrax_epid_get(index) ++ ++ ++static void tc_dma_process_isoc_urb(struct urb *urb); ++static void tc_dma_process_queue(int epid); ++static void tc_dma_unlink_intr_urb(struct urb *urb); ++static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc); ++static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc); ++ ++static void tc_bulk_start_timer_func(unsigned long dummy); ++static void tc_bulk_eot_timer_func(unsigned long dummy); ++ ++ ++/*************************************************************/ ++/*************************************************************/ ++/* Host Controler Driver block */ ++/*************************************************************/ ++/*************************************************************/ ++ ++/* HCD operations */ ++static irqreturn_t crisv10_hcd_top_irq(int irq, void*); ++static int crisv10_hcd_reset(struct usb_hcd *); ++static int crisv10_hcd_start(struct usb_hcd *); ++static void crisv10_hcd_stop(struct usb_hcd *); ++#ifdef CONFIG_PM ++static int crisv10_hcd_suspend(struct device *, u32, u32); ++static int crisv10_hcd_resume(struct device *, u32); ++#endif /* CONFIG_PM */ ++static int crisv10_hcd_get_frame(struct usb_hcd *); ++ ++static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags); ++static int tc_urb_dequeue(struct usb_hcd *, struct urb *); ++static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep); ++ ++static int rh_status_data_request(struct usb_hcd *, char *); ++static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16); ++ ++#ifdef CONFIG_PM ++static int crisv10_hcd_hub_suspend(struct usb_hcd *); ++static int crisv10_hcd_hub_resume(struct usb_hcd *); ++#endif /* CONFIG_PM */ ++#ifdef CONFIG_USB_OTG ++static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned); ++#endif /* CONFIG_USB_OTG */ ++ ++/* host controller driver interface */ ++static const struct hc_driver crisv10_hc_driver = ++ { ++ .description = hc_name, ++ .product_desc = product_desc, ++ .hcd_priv_size = sizeof(struct crisv10_hcd), ++ ++ /* Attaching IRQ handler manualy in probe() */ ++ /* .irq = crisv10_hcd_irq, */ ++ ++ .flags = HCD_USB11, ++ ++ /* called to init HCD and root hub */ ++ .reset = crisv10_hcd_reset, ++ .start = crisv10_hcd_start, ++ ++ /* cleanly make HCD stop writing memory and doing I/O */ ++ .stop = crisv10_hcd_stop, ++ ++ /* return current frame number */ ++ .get_frame_number = crisv10_hcd_get_frame, ++ ++ ++ /* Manage i/o requests via the Transfer Controller */ ++ .urb_enqueue = tc_urb_enqueue, ++ .urb_dequeue = tc_urb_dequeue, ++ ++ /* hw synch, freeing endpoint resources that urb_dequeue can't */ ++ .endpoint_disable = tc_endpoint_disable, ++ ++ ++ /* Root Hub support */ ++ .hub_status_data = rh_status_data_request, ++ .hub_control = rh_control_request, ++#ifdef CONFIG_PM ++ .hub_suspend = rh_suspend_request, ++ .hub_resume = rh_resume_request, ++#endif /* CONFIG_PM */ ++#ifdef CONFIG_USB_OTG ++ .start_port_reset = crisv10_hcd_start_port_reset, ++#endif /* CONFIG_USB_OTG */ ++ }; ++ ++ ++/* ++ * conversion between pointers to a hcd and the corresponding ++ * crisv10_hcd ++ */ ++ ++static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd) ++{ ++ return (struct crisv10_hcd *) hcd->hcd_priv; ++} ++ ++static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd) ++{ ++ return container_of((void *) hcd, struct usb_hcd, hcd_priv); ++} ++ ++/* check if specified port is in use */ ++static inline int port_in_use(unsigned int port) ++{ ++ return ports & (1 << port); ++} ++ ++/* number of ports in use */ ++static inline unsigned int num_ports(void) ++{ ++ unsigned int i, num = 0; ++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) ++ if (port_in_use(i)) ++ num++; ++ return num; ++} ++ ++/* map hub port number to the port number used internally by the HC */ ++static inline unsigned int map_port(unsigned int port) ++{ ++ unsigned int i, num = 0; ++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) ++ if (port_in_use(i)) ++ if (++num == port) ++ return i; ++ return -1; ++} ++ ++/* size of descriptors in slab cache */ ++#ifndef MAX ++#define MAX(x, y) ((x) > (y) ? (x) : (y)) ++#endif ++ ++ ++/******************************************************************/ ++/* Hardware Interrupt functions */ ++/******************************************************************/ ++ ++/* Fast interrupt handler for HC */ ++static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd) ++{ ++ struct usb_hcd *hcd = vcd; ++ struct crisv10_irq_reg reg; ++ __u32 irq_mask; ++ unsigned long flags; ++ ++ DBFENTER; ++ ++ ASSERT(hcd != NULL); ++ reg.hcd = hcd; ++ ++ /* Turn of other interrupts while handling these sensitive cases */ ++ local_irq_save(flags); ++ ++ /* Read out which interrupts that are flaged */ ++ irq_mask = *R_USB_IRQ_MASK_READ; ++ reg.r_usb_irq_mask_read = irq_mask; ++ ++ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that ++ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter ++ clears the ourun and perror fields of R_USB_STATUS. */ ++ reg.r_usb_status = *R_USB_STATUS; ++ ++ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn ++ interrupts. */ ++ reg.r_usb_epid_attn = *R_USB_EPID_ATTN; ++ ++ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the ++ port_status interrupt. */ ++ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1; ++ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2; ++ ++ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ ++ /* Note: the lower 11 bits contain the actual frame number, sent with each ++ sof. */ ++ reg.r_usb_fm_number = *R_USB_FM_NUMBER; ++ ++ /* Interrupts are handled in order of priority. */ ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { ++ crisv10_hcd_port_status_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { ++ crisv10_hcd_epid_attn_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { ++ crisv10_hcd_ctl_status_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { ++ crisv10_hcd_isoc_eof_irq(®); ++ } ++ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { ++ /* Update/restart the bulk start timer since obviously the channel is ++ running. */ ++ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); ++ /* Update/restart the bulk eot timer since we just received an bulk eot ++ interrupt. */ ++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); ++ ++ /* Check for finished bulk transfers on epids */ ++ check_finished_bulk_tx_epids(hcd, 0); ++ } ++ local_irq_restore(flags); ++ ++ DBFEXIT; ++ return IRQ_HANDLED; ++} ++ ++ ++void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) { ++ struct usb_hcd *hcd = reg->hcd; ++ struct crisv10_urb_priv *urb_priv; ++ int epid; ++ DBFENTER; ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if (test_bit(epid, (void *)®->r_usb_epid_attn)) { ++ struct urb *urb; ++ __u32 ept_data; ++ int error_code; ++ ++ if (epid == DUMMY_EPID || epid == INVALID_EPID) { ++ /* We definitely don't care about these ones. Besides, they are ++ always disabled, so any possible disabling caused by the ++ epid attention interrupt is irrelevant. */ ++ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid); ++ continue; ++ } ++ ++ if(!epid_inuse(epid)) { ++ irq_err("Epid attention on epid:%d that isn't in use\n", epid); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ debug_epid(epid); ++ continue; ++ } ++ ++ /* Note that although there are separate R_USB_EPT_DATA and ++ R_USB_EPT_DATA_ISO registers, they are located at the same address and ++ are of the same size. In other words, this read should be ok for isoc ++ also. */ ++ ept_data = etrax_epid_get(epid); ++ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data); ++ ++ /* Get the active URB for this epid. We blatantly assume ++ that only this URB could have caused the epid attention. */ ++ urb = activeUrbList[epid]; ++ if (urb == NULL) { ++ irq_err("Attention on epid:%d error:%d with no active URB.\n", ++ epid, error_code); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ debug_epid(epid); ++ continue; ++ } ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ ++ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ ++ /* Isoc traffic doesn't have error_count_in/error_count_out. */ ++ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && ++ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 || ++ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) { ++ /* Check if URB allready is marked for late-finish, we can get ++ several 3rd error for Intr traffic when a device is unplugged */ ++ if(urb_priv->later_data == NULL) { ++ /* 3rd error. */ ++ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe), ++ (unsigned int)urb, urb_priv->urb_num); ++ ++ tc_finish_urb_later(hcd, urb, -EPROTO); ++ } ++ ++ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { ++ irq_warn("Perror for epid:%d\n", epid); ++ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ __dump_urb(urb); ++ debug_epid(epid); ++ ++ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { ++ /* invalid ep_id */ ++ panic("Perror because of invalid epid." ++ " Deconfigured too early?"); ++ } else { ++ /* past eof1, near eof, zout transfer, setup transfer */ ++ /* Dump the urb and the relevant EP descriptor. */ ++ panic("Something wrong with DMA descriptor contents." ++ " Too much traffic inserted?"); ++ } ++ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { ++ /* buffer ourun */ ++ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ __dump_urb(urb); ++ debug_epid(epid); ++ ++ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid); ++ } else { ++ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe)); ++ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); ++ __dump_urb(urb); ++ debug_epid(epid); ++ } ++ ++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, ++ stall)) { ++ /* Not really a protocol error, just says that the endpoint gave ++ a stall response. Note that error_code cannot be stall for isoc. */ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ panic("Isoc traffic cannot stall"); ++ } ++ ++ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb); ++ tc_finish_urb(hcd, urb, -EPIPE); ++ ++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, ++ bus_error)) { ++ /* Two devices responded to a transaction request. Must be resolved ++ by software. FIXME: Reset ports? */ ++ panic("Bus error for epid %d." ++ " Two devices responded to transaction request\n", ++ epid); ++ ++ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, ++ buffer_error)) { ++ /* DMA overrun or underrun. */ ++ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe)); ++ ++ /* It seems that error_code = buffer_error in ++ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS ++ are the same error. */ ++ tc_finish_urb(hcd, urb, -EPROTO); ++ } else { ++ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid, ++ str_dir(urb->pipe), str_type(urb->pipe)); ++ dump_ept_data(epid); ++ } ++ } ++ } ++ DBFEXIT; ++} ++ ++void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg) ++{ ++ __u16 port_reg[USB_ROOT_HUB_PORTS]; ++ DBFENTER; ++ port_reg[0] = reg->r_usb_rh_port_status_1; ++ port_reg[1] = reg->r_usb_rh_port_status_2; ++ rh_port_status_change(port_reg); ++ DBFEXIT; ++} ++ ++void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg) ++{ ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv *urb_priv; ++ ++ DBFENTER; ++ ++ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { ++ ++ /* Only check epids that are in use, is valid and has SB list */ ++ if (!epid_inuse(epid) || epid == INVALID_EPID || ++ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) { ++ /* Nothing here to see. */ ++ continue; ++ } ++ ASSERT(epid_isoc(epid)); ++ ++ /* Get the active URB for this epid (if any). */ ++ urb = activeUrbList[epid]; ++ if (urb == 0) { ++ isoc_warn("Ignoring NULL urb for epid:%d\n", epid); ++ continue; ++ } ++ if(!epid_out_traffic(epid)) { ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ if (urb_priv->urb_state == NOT_STARTED) { ++ /* If ASAP is not set and urb->start_frame is the current frame, ++ start the transfer. */ ++ if (!(urb->transfer_flags & URB_ISO_ASAP) && ++ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { ++ /* EP should not be enabled if we're waiting for start_frame */ ++ ASSERT((TxIsocEPList[epid].command & ++ IO_STATE(USB_EP_command, enable, yes)) == 0); ++ ++ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid); ++ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ ++ /* This urb is now active. */ ++ urb_priv->urb_state = STARTED; ++ continue; ++ } ++ } ++ } ++ } ++ ++ DBFEXIT; ++} ++ ++void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg) ++{ ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd); ++ ++ DBFENTER; ++ ASSERT(crisv10_hcd); ++ ++ irq_dbg("ctr_status_irq, controller status: %s\n", ++ hcd_status_to_str(reg->r_usb_status)); ++ ++ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB ++ list for the corresponding epid? */ ++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { ++ panic("USB controller got ourun."); ++ } ++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { ++ ++ /* Before, etrax_usb_do_intr_recover was called on this epid if it was ++ an interrupt pipe. I don't see how re-enabling all EP descriptors ++ will help if there was a programming error. */ ++ panic("USB controller got perror."); ++ } ++ ++ /* Keep track of USB Controller, if it's running or not */ ++ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) { ++ crisv10_hcd->running = 1; ++ } else { ++ crisv10_hcd->running = 0; ++ } ++ ++ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { ++ /* We should never operate in device mode. */ ++ panic("USB controller in device mode."); ++ } ++ ++ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably ++ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */ ++ set_bit(HCD_FLAG_SAW_IRQ, ®->hcd->flags); ++ ++ DBFEXIT; ++} ++ ++ ++/******************************************************************/ ++/* Host Controller interface functions */ ++/******************************************************************/ ++ ++static inline void crisv10_ready_wait(void) { ++ volatile int timeout = 10000; ++ /* Check the busy bit of USB controller in Etrax */ ++ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for USB controller to be idle\n"); ++ } ++} ++ ++/* reset host controller */ ++static int crisv10_hcd_reset(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ hcd_dbg(hcd, "reset\n"); ++ ++ ++ /* Reset the USB interface. */ ++ /* ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); ++ nop(); ++ */ ++ DBFEXIT; ++ return 0; ++} ++ ++/* start host controller */ ++static int crisv10_hcd_start(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ hcd_dbg(hcd, "start\n"); ++ ++ crisv10_ready_wait(); ++ ++ /* Start processing of USB traffic. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); ++ ++ nop(); ++ ++ hcd->state = HC_STATE_RUNNING; ++ ++ DBFEXIT; ++ return 0; ++} ++ ++/* stop host controller */ ++static void crisv10_hcd_stop(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ hcd_dbg(hcd, "stop\n"); ++ crisv10_hcd_reset(hcd); ++ DBFEXIT; ++} ++ ++/* return the current frame number */ ++static int crisv10_hcd_get_frame(struct usb_hcd *hcd) ++{ ++ DBFENTER; ++ DBFEXIT; ++ return (*R_USB_FM_NUMBER & 0x7ff); ++} ++ ++#ifdef CONFIG_USB_OTG ++ ++static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port) ++{ ++ return 0; /* no-op for now */ ++} ++ ++#endif /* CONFIG_USB_OTG */ ++ ++ ++/******************************************************************/ ++/* Root Hub functions */ ++/******************************************************************/ ++ ++/* root hub status */ ++static const struct usb_hub_status rh_hub_status = ++ { ++ .wHubStatus = 0, ++ .wHubChange = 0, ++ }; ++ ++/* root hub descriptor */ ++static const u8 rh_hub_descr[] = ++ { ++ 0x09, /* bDescLength */ ++ 0x29, /* bDescriptorType */ ++ USB_ROOT_HUB_PORTS, /* bNbrPorts */ ++ 0x00, /* wHubCharacteristics */ ++ 0x00, ++ 0x01, /* bPwrOn2pwrGood */ ++ 0x00, /* bHubContrCurrent */ ++ 0x00, /* DeviceRemovable */ ++ 0xff /* PortPwrCtrlMask */ ++ }; ++ ++/* Actual holder of root hub status*/ ++struct crisv10_rh rh; ++ ++/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */ ++int rh_init(void) { ++ int i; ++ /* Reset port status flags */ ++ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) { ++ rh.wPortChange[i] = 0; ++ rh.wPortStatusPrev[i] = 0; ++ } ++ return 0; ++} ++ ++#define RH_FEAT_MASK ((1<<USB_PORT_FEAT_CONNECTION)|\ ++ (1<<USB_PORT_FEAT_ENABLE)|\ ++ (1<<USB_PORT_FEAT_SUSPEND)|\ ++ (1<<USB_PORT_FEAT_RESET)) ++ ++/* Handle port status change interrupt (called from bottom part interrupt) */ ++void rh_port_status_change(__u16 port_reg[]) { ++ int i; ++ __u16 wChange; ++ ++ for(i = 0; i < USB_ROOT_HUB_PORTS; i++) { ++ /* Xor out changes since last read, masked for important flags */ ++ wChange = (port_reg[i] & RH_FEAT_MASK) ^ rh.wPortStatusPrev[i]; ++ /* Or changes together with (if any) saved changes */ ++ rh.wPortChange[i] |= wChange; ++ /* Save new status */ ++ rh.wPortStatusPrev[i] = port_reg[i]; ++ ++ if(wChange) { ++ rh_dbg("Interrupt port_status change port%d: %s Current-status:%s\n", i+1, ++ port_status_to_str(wChange), ++ port_status_to_str(port_reg[i])); ++ } ++ } ++} ++ ++/* Construct port status change bitmap for the root hub */ ++static int rh_status_data_request(struct usb_hcd *hcd, char *buf) ++{ ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ unsigned int i; ++ ++ DBFENTER; ++ /* ++ * corresponds to hub status change EP (USB 2.0 spec section 11.13.4) ++ * return bitmap indicating ports with status change ++ */ ++ *buf = 0; ++ spin_lock(&crisv10_hcd->lock); ++ for (i = 1; i <= crisv10_hcd->num_ports; i++) { ++ if (rh.wPortChange[map_port(i)]) { ++ *buf |= (1 << i); ++ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i, ++ port_status_to_str(rh.wPortChange[map_port(i)]), ++ port_status_to_str(rh.wPortStatusPrev[map_port(i)])); ++ } ++ } ++ spin_unlock(&crisv10_hcd->lock); ++ DBFEXIT; ++ return *buf == 0 ? 0 : 1; ++} ++ ++/* Handle a control request for the root hub (called from hcd_driver) */ ++static int rh_control_request(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, ++ u16 wIndex, ++ char *buf, ++ u16 wLength) { ++ ++ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ int retval = 0; ++ int len; ++ DBFENTER; ++ ++ switch (typeReq) { ++ case GetHubDescriptor: ++ rh_dbg("GetHubDescriptor\n"); ++ len = min_t(unsigned int, sizeof rh_hub_descr, wLength); ++ memcpy(buf, rh_hub_descr, len); ++ buf[2] = crisv10_hcd->num_ports; ++ break; ++ case GetHubStatus: ++ rh_dbg("GetHubStatus\n"); ++ len = min_t(unsigned int, sizeof rh_hub_status, wLength); ++ memcpy(buf, &rh_hub_status, len); ++ break; ++ case GetPortStatus: ++ if (!wIndex || wIndex > crisv10_hcd->num_ports) ++ goto error; ++ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex, ++ port_status_to_str(rh.wPortChange[map_port(wIndex)]), ++ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)])); ++ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]); ++ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]); ++ break; ++ case SetHubFeature: ++ rh_dbg("SetHubFeature\n"); ++ case ClearHubFeature: ++ rh_dbg("ClearHubFeature\n"); ++ switch (wValue) { ++ case C_HUB_OVER_CURRENT: ++ case C_HUB_LOCAL_POWER: ++ rh_warn("Not implemented hub request:%d \n", typeReq); ++ /* not implemented */ ++ break; ++ default: ++ goto error; ++ } ++ break; ++ case SetPortFeature: ++ if (!wIndex || wIndex > crisv10_hcd->num_ports) ++ goto error; ++ if(rh_set_port_feature(map_port(wIndex), wValue)) ++ goto error; ++ break; ++ case ClearPortFeature: ++ if (!wIndex || wIndex > crisv10_hcd->num_ports) ++ goto error; ++ if(rh_clear_port_feature(map_port(wIndex), wValue)) ++ goto error; ++ break; ++ default: ++ rh_warn("Unknown hub request: %d\n", typeReq); ++ error: ++ retval = -EPIPE; ++ } ++ DBFEXIT; ++ return retval; ++} ++ ++int rh_set_port_feature(__u8 bPort, __u16 wFeature) { ++ __u8 bUsbCommand = 0; ++ switch(wFeature) { ++ case USB_PORT_FEAT_RESET: ++ rh_dbg("SetPortFeature: reset\n"); ++ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset); ++ goto set; ++ break; ++ case USB_PORT_FEAT_SUSPEND: ++ rh_dbg("SetPortFeature: suspend\n"); ++ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend); ++ goto set; ++ break; ++ case USB_PORT_FEAT_POWER: ++ rh_dbg("SetPortFeature: power\n"); ++ break; ++ case USB_PORT_FEAT_C_CONNECTION: ++ rh_dbg("SetPortFeature: c_connection\n"); ++ break; ++ case USB_PORT_FEAT_C_RESET: ++ rh_dbg("SetPortFeature: c_reset\n"); ++ break; ++ case USB_PORT_FEAT_C_OVER_CURRENT: ++ rh_dbg("SetPortFeature: c_over_current\n"); ++ break; ++ ++ set: ++ /* Select which port via the port_sel field */ ++ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); ++ ++ /* Make sure the controller isn't busy. */ ++ crisv10_ready_wait(); ++ /* Send out the actual command to the USB controller */ ++ *R_USB_COMMAND = bUsbCommand; ++ ++ /* If port reset then also bring USB controller into running state */ ++ if(wFeature == USB_PORT_FEAT_RESET) { ++ /* Wait a while for controller to first become started after port reset */ ++ udelay(12000); /* 12ms blocking wait */ ++ ++ /* Make sure the controller isn't busy. */ ++ crisv10_ready_wait(); ++ ++ /* If all enabled ports were disabled the host controller goes down into ++ started mode, so we need to bring it back into the running state. ++ (This is safe even if it's already in the running state.) */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); ++ } ++ ++ break; ++ default: ++ rh_dbg("SetPortFeature: unknown feature\n"); ++ return -1; ++ } ++ return 0; ++} ++ ++int rh_clear_port_feature(__u8 bPort, __u16 wFeature) { ++ switch(wFeature) { ++ case USB_PORT_FEAT_ENABLE: ++ rh_dbg("ClearPortFeature: enable\n"); ++ rh_disable_port(bPort); ++ break; ++ case USB_PORT_FEAT_SUSPEND: ++ rh_dbg("ClearPortFeature: suspend\n"); ++ break; ++ case USB_PORT_FEAT_POWER: ++ rh_dbg("ClearPortFeature: power\n"); ++ break; ++ ++ case USB_PORT_FEAT_C_ENABLE: ++ rh_dbg("ClearPortFeature: c_enable\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_SUSPEND: ++ rh_dbg("ClearPortFeature: c_suspend\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_CONNECTION: ++ rh_dbg("ClearPortFeature: c_connection\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_OVER_CURRENT: ++ rh_dbg("ClearPortFeature: c_over_current\n"); ++ goto clear; ++ case USB_PORT_FEAT_C_RESET: ++ rh_dbg("ClearPortFeature: c_reset\n"); ++ goto clear; ++ clear: ++ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16)); ++ break; ++ default: ++ rh_dbg("ClearPortFeature: unknown feature\n"); ++ return -1; ++ } ++ return 0; ++} ++ ++ ++#ifdef CONFIG_PM ++/* Handle a suspend request for the root hub (called from hcd_driver) */ ++static int rh_suspend_request(struct usb_hcd *hcd) ++{ ++ return 0; /* no-op for now */ ++} ++ ++/* Handle a resume request for the root hub (called from hcd_driver) */ ++static int rh_resume_request(struct usb_hcd *hcd) ++{ ++ return 0; /* no-op for now */ ++} ++#endif /* CONFIG_PM */ ++ ++ ++ ++/* Wrapper function for workaround port disable registers in USB controller */ ++static void rh_disable_port(unsigned int port) { ++ volatile int timeout = 10000; ++ volatile char* usb_portx_disable; ++ switch(port) { ++ case 0: ++ usb_portx_disable = R_USB_PORT1_DISABLE; ++ break; ++ case 1: ++ usb_portx_disable = R_USB_PORT2_DISABLE; ++ break; ++ default: ++ /* Invalid port index */ ++ return; ++ } ++ /* Set disable flag in special register */ ++ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); ++ /* Wait until not enabled anymore */ ++ while((rh.wPortStatusPrev[port] & ++ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for port %d to become disabled\n", port); ++ } ++ /* clear disable flag in special register */ ++ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no); ++ rh_info("Physical port %d disabled\n", port+1); ++} ++ ++ ++/******************************************************************/ ++/* Transfer Controller (TC) functions */ ++/******************************************************************/ ++ ++/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it ++ dynamically? ++ To adjust it dynamically we would have to get an interrupt when we reach ++ the end of the rx descriptor list, or when we get close to the end, and ++ then allocate more descriptors. */ ++#define NBR_OF_RX_DESC 512 ++#define RX_DESC_BUF_SIZE 1024 ++#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) ++ ++ ++/* Local variables for Transfer Controller */ ++/* --------------------------------------- */ ++ ++/* This is a circular (double-linked) list of the active urbs for each epid. ++ The head is never removed, and new urbs are linked onto the list as ++ urb_entry_t elements. Don't reference urb_list directly; use the wrapper ++ functions instead (which includes spin_locks) */ ++static struct list_head urb_list[NBR_OF_EPIDS]; ++ ++/* Read about the need and usage of this lock in submit_ctrl_urb. */ ++/* Lock for URB lists for each EPID */ ++static spinlock_t urb_list_lock; ++ ++/* Lock for EPID array register (R_USB_EPT_x) in Etrax */ ++static spinlock_t etrax_epid_lock; ++ ++/* Lock for dma8 sub0 handling */ ++static spinlock_t etrax_dma8_sub0_lock; ++ ++/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. ++ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be ++ cache aligned. */ ++static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); ++static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); ++ ++/* Pointers into RxDescList. */ ++static volatile struct USB_IN_Desc *myNextRxDesc; ++static volatile struct USB_IN_Desc *myLastRxDesc; ++ ++/* A zout transfer makes a memory access at the address of its buf pointer, ++ which means that setting this buf pointer to 0 will cause an access to the ++ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes ++ (depending on DMA burst size) transfer. ++ Instead, we set it to 1, and point it to this buffer. */ ++static int zout_buffer[4] __attribute__ ((aligned (4))); ++ ++/* Cache for allocating new EP and SB descriptors. */ ++static kmem_cache_t *usb_desc_cache; ++ ++/* Cache for the data allocated in the isoc descr top half. */ ++static kmem_cache_t *isoc_compl_cache; ++ ++/* Cache for the data allocated when delayed finishing of URBs */ ++static kmem_cache_t *later_data_cache; ++ ++ ++/* Counter to keep track of how many Isoc EP we have sat up. Used to enable ++ and disable iso_eof interrupt. We only need these interrupts when we have ++ Isoc data endpoints (consumes CPU cycles). ++ FIXME: This could be more fine granular, so this interrupt is only enabled ++ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */ ++static int isoc_epid_counter; ++ ++/* Protecting wrapper functions for R_USB_EPT_x */ ++/* -------------------------------------------- */ ++static inline void etrax_epid_set(__u8 index, __u32 data) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ *R_USB_EPT_DATA = data; ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++} ++ ++static inline void etrax_epid_clear_error(__u8 index) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ *R_USB_EPT_DATA &= ++ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | ++ IO_MASK(R_USB_EPT_DATA, error_count_out) | ++ IO_MASK(R_USB_EPT_DATA, error_code)); ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++} ++ ++static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, ++ __u8 toggle) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ if(dirout) { ++ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); ++ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); ++ } else { ++ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); ++ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); ++ } ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++} ++ ++static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) { ++ unsigned long flags; ++ __u8 toggle; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ if (dirout) { ++ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); ++ } else { ++ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); ++ } ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++ return toggle; ++} ++ ++ ++static inline __u32 etrax_epid_get(__u8 index) { ++ unsigned long flags; ++ __u32 data; ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); ++ nop(); ++ data = *R_USB_EPT_DATA; ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++ return data; ++} ++ ++ ++ ++ ++/* Main functions for Transfer Controller */ ++/* -------------------------------------- */ ++ ++/* Init structs, memories and lists used by Transfer Controller */ ++int tc_init(struct usb_hcd *hcd) { ++ int i; ++ /* Clear software state info for all epids */ ++ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS); ++ ++ /* Set Invalid and Dummy as being in use and disabled */ ++ epid_state[INVALID_EPID].inuse = 1; ++ epid_state[DUMMY_EPID].inuse = 1; ++ epid_state[INVALID_EPID].disabled = 1; ++ epid_state[DUMMY_EPID].disabled = 1; ++ ++ /* Clear counter for how many Isoc epids we have sat up */ ++ isoc_epid_counter = 0; ++ ++ /* Initialize the urb list by initiating a head for each list. ++ Also reset list hodling active URB for each epid */ ++ for (i = 0; i < NBR_OF_EPIDS; i++) { ++ INIT_LIST_HEAD(&urb_list[i]); ++ activeUrbList[i] = NULL; ++ } ++ ++ /* Init lock for URB lists */ ++ spin_lock_init(&urb_list_lock); ++ /* Init lock for Etrax R_USB_EPT register */ ++ spin_lock_init(&etrax_epid_lock); ++ /* Init lock for Etrax dma8 sub0 handling */ ++ spin_lock_init(&etrax_dma8_sub0_lock); ++ ++ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ ++ ++ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also ++ allocate SB descriptors from this cache. This is ok since ++ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */ ++ usb_desc_cache = kmem_cache_create("usb_desc_cache", ++ sizeof(struct USB_EP_Desc), 0, ++ SLAB_HWCACHE_ALIGN, 0, 0); ++ if(usb_desc_cache == NULL) { ++ return -ENOMEM; ++ } ++ ++ /* Create slab cache for speedy allocation of memory for isoc bottom-half ++ interrupt handling */ ++ isoc_compl_cache = ++ kmem_cache_create("isoc_compl_cache", ++ sizeof(struct crisv10_isoc_complete_data), ++ 0, SLAB_HWCACHE_ALIGN, 0, 0); ++ if(isoc_compl_cache == NULL) { ++ return -ENOMEM; ++ } ++ ++ /* Create slab cache for speedy allocation of memory for later URB finish ++ struct */ ++ later_data_cache = ++ kmem_cache_create("later_data_cache", ++ sizeof(struct urb_later_data), ++ 0, SLAB_HWCACHE_ALIGN, 0, 0); ++ if(later_data_cache == NULL) { ++ return -ENOMEM; ++ } ++ ++ ++ /* Initiate the bulk start timer. */ ++ init_timer(&bulk_start_timer); ++ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; ++ bulk_start_timer.function = tc_bulk_start_timer_func; ++ add_timer(&bulk_start_timer); ++ ++ ++ /* Initiate the bulk eot timer. */ ++ init_timer(&bulk_eot_timer); ++ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; ++ bulk_eot_timer.function = tc_bulk_eot_timer_func; ++ bulk_eot_timer.data = (unsigned long)hcd; ++ add_timer(&bulk_eot_timer); ++ ++ return 0; ++} ++ ++/* Uninitialize all resources used by Transfer Controller */ ++void tc_destroy(void) { ++ ++ /* Destroy all slab cache */ ++ kmem_cache_destroy(usb_desc_cache); ++ kmem_cache_destroy(isoc_compl_cache); ++ kmem_cache_destroy(later_data_cache); ++ ++ /* Remove timers */ ++ del_timer(&bulk_start_timer); ++ del_timer(&bulk_eot_timer); ++} ++ ++static void restart_dma8_sub0(void) { ++ unsigned long flags; ++ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags); ++ /* Verify that the dma is not running */ ++ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) { ++ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP); ++ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) { ++ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next); ++ } ++ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID. ++ * ep->next is already a physical address; no need for a virt_to_phys. */ ++ *R_DMA_CH8_SUB0_EP = ep->next; ++ /* Restart the DMA */ ++ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); ++ } ++ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags); ++} ++ ++/* queue an URB with the transfer controller (called from hcd_driver) */ ++static int tc_urb_enqueue(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep, ++ struct urb *urb, ++ gfp_t mem_flags) { ++ int epid; ++ int retval; ++ int bustime = 0; ++ int maxpacket; ++ unsigned long flags; ++ struct crisv10_urb_priv *urb_priv; ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ DBFENTER; ++ ++ if(!(crisv10_hcd->running)) { ++ /* The USB Controller is not running, probably because no device is ++ attached. No idea to enqueue URBs then */ ++ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n", ++ (unsigned int)urb); ++ return -ENOENT; ++ } ++ ++ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); ++ /* Special case check for In Isoc transfers. Specification states that each ++ In Isoc transfer consists of one packet and therefore it should fit into ++ the transfer-buffer of an URB. ++ We do the check here to be sure (an invalid scenario can be produced with ++ parameters to the usbtest suite) */ ++ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) && ++ (urb->transfer_buffer_length < maxpacket)) { ++ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket); ++ return -EMSGSIZE; ++ } ++ ++ /* Check if there is enough bandwidth for periodic transfer */ ++ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) { ++ /* only check (and later claim) if not already claimed */ ++ if (urb->bandwidth == 0) { ++ bustime = usb_check_bandwidth(urb->dev, urb); ++ if (bustime < 0) { ++ tc_err("Not enough periodic bandwidth\n"); ++ return -ENOSPC; ++ } ++ } ++ } ++ ++ /* Check if there is a epid for URBs destination, if not this function ++ set up one. */ ++ epid = tc_setup_epid(ep, urb, mem_flags); ++ if (epid < 0) { ++ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb); ++ DBFEXIT; ++ return -ENOMEM; ++ } ++ ++ if(urb == activeUrbList[epid]) { ++ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb); ++ return -ENXIO; ++ } ++ ++ if(urb_list_entry(urb, epid)) { ++ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb); ++ return -ENXIO; ++ } ++ ++ /* If we actively have flaged endpoint as disabled then refuse submition */ ++ if(epid_state[epid].disabled) { ++ return -ENOENT; ++ } ++ ++ /* Allocate and init HC-private data for URB */ ++ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) { ++ DBFEXIT; ++ return -ENOMEM; ++ } ++ urb_priv = urb->hcpriv; ++ ++ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n", ++ (unsigned int)urb, urb_priv->urb_num, epid, ++ pipe_to_str(urb->pipe), urb->transfer_buffer_length); ++ ++ /* Create and link SBs required for this URB */ ++ retval = create_sb_for_urb(urb, mem_flags); ++ if(retval != 0) { ++ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb, ++ urb_priv->urb_num); ++ urb_priv_free(hcd, urb); ++ DBFEXIT; ++ return retval; ++ } ++ ++ /* Init intr EP pool if this URB is a INTR transfer. This pool is later ++ used when inserting EPs in the TxIntrEPList. We do the alloc here ++ so we can't run out of memory later */ ++ if(usb_pipeint(urb->pipe)) { ++ retval = init_intr_urb(urb, mem_flags); ++ if(retval != 0) { ++ tc_warn("Failed to init Intr URB\n"); ++ urb_priv_free(hcd, urb); ++ DBFEXIT; ++ return retval; ++ } ++ } ++ ++ /* Disable other access when inserting USB */ ++ local_irq_save(flags); ++ ++ /* Claim bandwidth, if needed */ ++ if(bustime) { ++ usb_claim_bandwidth(urb->dev, urb, bustime, 0); ++ } ++ ++ /* Add URB to EP queue */ ++ urb_list_add(urb, epid, mem_flags); ++ ++ if(usb_pipeisoc(urb->pipe)) { ++ /* Special processing of Isoc URBs. */ ++ tc_dma_process_isoc_urb(urb); ++ } else { ++ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ ++ tc_dma_process_queue(epid); ++ } ++ ++ local_irq_restore(flags); ++ ++ DBFEXIT; ++ return 0; ++} ++ ++/* remove an URB from the transfer controller queues (called from hcd_driver)*/ ++static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) { ++ struct crisv10_urb_priv *urb_priv; ++ unsigned long flags; ++ int epid; ++ ++ DBFENTER; ++ /* Disable interrupts here since a descriptor interrupt for the isoc epid ++ will modify the sb list. This could possibly be done more granular, but ++ urb_dequeue should not be used frequently anyway. ++ */ ++ local_irq_save(flags); ++ ++ urb_priv = urb->hcpriv; ++ ++ if (!urb_priv) { ++ /* This happens if a device driver calls unlink on an urb that ++ was never submitted (lazy driver) or if the urb was completed ++ while dequeue was being called. */ ++ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb); ++ local_irq_restore(flags); ++ return 0; ++ } ++ epid = urb_priv->epid; ++ ++ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", ++ (urb == activeUrbList[epid]) ? "active" : "queued", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), epid, urb->status, ++ (urb_priv->later_data) ? "later-sched" : ""); ++ ++ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB ++ that isn't active can be dequeued by just removing it from the queue */ ++ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) || ++ usb_pipeint(urb->pipe)) { ++ ++ /* Check if URB haven't gone further than the queue */ ++ if(urb != activeUrbList[epid]) { ++ ASSERT(urb_priv->later_data == NULL); ++ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue" ++ " (not active)\n", (unsigned int)urb, urb_priv->urb_num, ++ str_dir(urb->pipe), str_type(urb->pipe), epid); ++ ++ /* Finish the URB with error status from USB core */ ++ tc_finish_urb(hcd, urb, urb->status); ++ local_irq_restore(flags); ++ return 0; ++ } ++ } ++ ++ /* Set URB status to Unlink for handling when interrupt comes. */ ++ urb_priv->urb_state = UNLINK; ++ ++ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */ ++ switch(usb_pipetype(urb->pipe)) { ++ case PIPE_BULK: ++ /* Check if EP still is enabled */ ++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ /* Kicking dummy list out of the party. */ ++ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); ++ break; ++ case PIPE_CONTROL: ++ /* Check if EP still is enabled */ ++ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ break; ++ case PIPE_ISOCHRONOUS: ++ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in ++ finish_isoc_urb(). Because there might the case when URB is dequeued ++ but there are other valid URBs waiting */ ++ ++ /* Check if In Isoc EP still is enabled */ ++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ break; ++ case PIPE_INTERRUPT: ++ /* Special care is taken for interrupt URBs. EPs are unlinked in ++ tc_finish_urb */ ++ break; ++ default: ++ break; ++ } ++ ++ /* Asynchronous unlink, finish the URB later from scheduled or other ++ event (data finished, error) */ ++ tc_finish_urb_later(hcd, urb, urb->status); ++ ++ local_irq_restore(flags); ++ DBFEXIT; ++ return 0; ++} ++ ++ ++static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) { ++ volatile int timeout = 10000; ++ struct urb* urb; ++ struct crisv10_urb_priv* urb_priv; ++ unsigned long flags; ++ ++ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ ++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ ++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ ++ ++ int type = epid_state[epid].type; ++ ++ /* Setting this flag will cause enqueue() to return -ENOENT for new ++ submitions on this endpoint and finish_urb() wont process queue further */ ++ epid_state[epid].disabled = 1; ++ ++ switch(type) { ++ case PIPE_BULK: ++ /* Check if EP still is enabled */ ++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); ++ ++ /* Do busy-wait until DMA not using this EP descriptor anymore */ ++ while((*R_DMA_CH8_SUB0_EP == ++ virt_to_phys(&TxBulkEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for" ++ " epid:%d\n", epid); ++ } ++ } ++ break; ++ ++ case PIPE_CONTROL: ++ /* Check if EP still is enabled */ ++ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ /* The EP was enabled, disable it. */ ++ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); ++ ++ /* Do busy-wait until DMA not using this EP descriptor anymore */ ++ while((*R_DMA_CH8_SUB1_EP == ++ virt_to_phys(&TxCtrlEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for" ++ " epid:%d\n", epid); ++ } ++ } ++ break; ++ ++ case PIPE_INTERRUPT: ++ local_irq_save(flags); ++ /* Disable all Intr EPs belonging to epid */ ++ first_ep = &TxIntrEPList[0]; ++ curr_ep = first_ep; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { ++ /* Disable EP */ ++ next_ep->command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != first_ep); ++ ++ local_irq_restore(flags); ++ break; ++ ++ case PIPE_ISOCHRONOUS: ++ /* Check if EP still is enabled */ ++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid); ++ /* The EP was enabled, disable it. */ ++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ ++ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for" ++ " epid:%d\n", epid); ++ } ++ } ++ break; ++ } ++ ++ local_irq_save(flags); ++ ++ /* Finish if there is active URB for this endpoint */ ++ if(activeUrbList[epid] != NULL) { ++ urb = activeUrbList[epid]; ++ urb_priv = urb->hcpriv; ++ ASSERT(urb_priv); ++ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", ++ (urb == activeUrbList[epid]) ? "active" : "queued", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), epid, urb->status, ++ (urb_priv->later_data) ? "later-sched" : ""); ++ ++ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT); ++ ASSERT(activeUrbList[epid] == NULL); ++ } ++ ++ /* Finish any queued URBs for this endpoint. There won't be any resubmitions ++ because epid_disabled causes enqueue() to fail for this endpoint */ ++ while((urb = urb_list_first(epid)) != NULL) { ++ urb_priv = urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", ++ (urb == activeUrbList[epid]) ? "active" : "queued", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), epid, urb->status, ++ (urb_priv->later_data) ? "later-sched" : ""); ++ ++ tc_finish_urb(hcd, urb, -ENOENT); ++ } ++ epid_state[epid].disabled = 0; ++ local_irq_restore(flags); ++} ++ ++/* free resources associated with an endpoint (called from hcd_driver) */ ++static void tc_endpoint_disable(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep) { ++ DBFENTER; ++ /* Only free epid if it has been allocated. We get two endpoint_disable ++ requests for ctrl endpoints so ignore the second one */ ++ if(ep->hcpriv != NULL) { ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ int epid = ep_priv->epid; ++ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n", ++ (unsigned int)ep, (unsigned int)ep->hcpriv, ++ endpoint_to_str(&(ep->desc)), epid); ++ ++ tc_sync_finish_epid(hcd, epid); ++ ++ ASSERT(activeUrbList[epid] == NULL); ++ ASSERT(list_empty(&urb_list[epid])); ++ ++ tc_free_epid(ep); ++ } else { ++ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep, ++ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc))); ++ } ++ DBFEXIT; ++} ++ ++static void tc_finish_urb_later_proc(void *data) { ++ unsigned long flags; ++ struct urb_later_data* uld = (struct urb_later_data*)data; ++ local_irq_save(flags); ++ if(uld->urb == NULL) { ++ late_dbg("Later finish of URB = NULL (allready finished)\n"); ++ } else { ++ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv; ++ ASSERT(urb_priv); ++ if(urb_priv->urb_num == uld->urb_num) { ++ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb), ++ urb_priv->urb_num); ++ if(uld->status != uld->urb->status) { ++ errno_dbg("Later-finish URB with status:%d, later-status:%d\n", ++ uld->urb->status, uld->status); ++ } ++ if(uld != urb_priv->later_data) { ++ panic("Scheduled uld not same as URBs uld\n"); ++ } ++ tc_finish_urb(uld->hcd, uld->urb, uld->status); ++ } else { ++ late_warn("Ignoring later finish of URB:0x%x[%d]" ++ ", urb_num doesn't match current URB:0x%x[%d]", ++ (unsigned int)(uld->urb), uld->urb_num, ++ (unsigned int)(uld->urb), urb_priv->urb_num); ++ } ++ } ++ local_irq_restore(flags); ++ kmem_cache_free(later_data_cache, uld); ++} ++ ++static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, ++ int status) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ struct urb_later_data* uld; ++ ++ ASSERT(urb_priv); ++ ++ if(urb_priv->later_data != NULL) { ++ /* Later-finish allready scheduled for this URB, just update status to ++ return when finishing later */ ++ errno_dbg("Later-finish schedule change URB status:%d with new" ++ " status:%d\n", urb_priv->later_data->status, status); ++ ++ urb_priv->later_data->status = status; ++ return; ++ } ++ ++ uld = kmem_cache_alloc(later_data_cache, SLAB_ATOMIC); ++ ASSERT(uld); ++ ++ uld->hcd = hcd; ++ uld->urb = urb; ++ uld->urb_num = urb_priv->urb_num; ++ uld->status = status; ++ ++ INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld); ++ urb_priv->later_data = uld; ++ ++ /* Schedule the finishing of the URB to happen later */ ++ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY); ++} ++ ++static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, ++ int status); ++ ++static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) { ++ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ int epid; ++ char toggle; ++ int urb_num; ++ ++ DBFENTER; ++ ASSERT(urb_priv != NULL); ++ epid = urb_priv->epid; ++ urb_num = urb_priv->urb_num; ++ ++ if(urb != activeUrbList[epid]) { ++ if(urb_list_entry(urb, epid)) { ++ /* Remove this URB from the list. Only happens when URB are finished ++ before having been processed (dequeing) */ ++ urb_list_del(urb, epid); ++ } else { ++ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for" ++ " epid:%d\n", (unsigned int)urb, urb_num, epid); ++ } ++ } ++ ++ /* Cancel any pending later-finish of this URB */ ++ if(urb_priv->later_data) { ++ urb_priv->later_data->urb = NULL; ++ } ++ ++ /* For an IN pipe, we always set the actual length, regardless of whether ++ there was an error or not (which means the device driver can use the data ++ if it wants to). */ ++ if(usb_pipein(urb->pipe)) { ++ urb->actual_length = urb_priv->rx_offset; ++ } else { ++ /* Set actual_length for OUT urbs also; the USB mass storage driver seems ++ to want that. */ ++ if (status == 0 && urb->status == -EINPROGRESS) { ++ urb->actual_length = urb->transfer_buffer_length; ++ } else { ++ /* We wouldn't know of any partial writes if there was an error. */ ++ urb->actual_length = 0; ++ } ++ } ++ ++ ++ /* URB status mangling */ ++ if(urb->status == -EINPROGRESS) { ++ /* The USB core hasn't changed the status, let's set our finish status */ ++ urb->status = status; ++ ++ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) && ++ usb_pipein(urb->pipe) && ++ (urb->actual_length != urb->transfer_buffer_length)) { ++ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's ++ max length) is to be treated as an error. */ ++ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short" ++ " data:%d\n", (unsigned int)urb, urb_num, ++ urb->actual_length); ++ urb->status = -EREMOTEIO; ++ } ++ ++ if(urb_priv->urb_state == UNLINK) { ++ /* URB has been requested to be unlinked asynchronously */ ++ urb->status = -ECONNRESET; ++ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n", ++ (unsigned int)urb, urb_num, urb->status); ++ } ++ } else { ++ /* The USB Core wants to signal some error via the URB, pass it through */ ++ } ++ ++ /* use completely different finish function for Isoc URBs */ ++ if(usb_pipeisoc(urb->pipe)) { ++ tc_finish_isoc_urb(hcd, urb, status); ++ return; ++ } ++ ++ /* Do special unlinking of EPs for Intr traffic */ ++ if(usb_pipeint(urb->pipe)) { ++ tc_dma_unlink_intr_urb(urb); ++ } ++ ++ /* Release allocated bandwidth for periodic transfers */ ++ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) ++ usb_release_bandwidth(urb->dev, urb, 0); ++ ++ /* This URB is active on EP */ ++ if(urb == activeUrbList[epid]) { ++ /* We need to fiddle with the toggle bits because the hardware doesn't do ++ it for us. */ ++ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe)); ++ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), ++ usb_pipeout(urb->pipe), toggle); ++ ++ /* Checks for Ctrl and Bulk EPs */ ++ switch(usb_pipetype(urb->pipe)) { ++ case PIPE_BULK: ++ /* Check so Bulk EP realy is disabled before finishing active URB */ ++ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) == ++ IO_STATE(USB_EP_command, enable, no)); ++ /* Disable sub-pointer for EP to avoid next tx_interrupt() to ++ process Bulk EP. */ ++ TxBulkEPList[epid].sub = 0; ++ /* No need to wait for the DMA before changing the next pointer. ++ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use ++ the last one (INVALID_EPID) for actual traffic. */ ++ TxBulkEPList[epid].next = ++ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); ++ break; ++ case PIPE_CONTROL: ++ /* Check so Ctrl EP realy is disabled before finishing active URB */ ++ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) == ++ IO_STATE(USB_EP_command, enable, no)); ++ /* Disable sub-pointer for EP to avoid next tx_interrupt() to ++ process Ctrl EP. */ ++ TxCtrlEPList[epid].sub = 0; ++ break; ++ } ++ } ++ ++ /* Free HC-private URB data*/ ++ urb_priv_free(hcd, urb); ++ ++ if(urb->status) { ++ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", ++ (unsigned int)urb, urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb->actual_length, urb->status); ++ } else { ++ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", ++ (unsigned int)urb, urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb->actual_length, urb->status); ++ } ++ ++ /* If we just finished an active URB, clear active pointer. */ ++ if (urb == activeUrbList[epid]) { ++ /* Make URB not active on EP anymore */ ++ activeUrbList[epid] = NULL; ++ ++ if(urb->status == 0) { ++ /* URB finished sucessfully, process queue to see if there are any more ++ URBs waiting before we call completion function.*/ ++ if(crisv10_hcd->running) { ++ /* Only process queue if USB controller is running */ ++ tc_dma_process_queue(epid); ++ } else { ++ tc_warn("No processing of queue for epid:%d, USB Controller not" ++ " running\n", epid); ++ } ++ } ++ } ++ ++ /* Hand the URB from HCD to its USB device driver, using its completion ++ functions */ ++ usb_hcd_giveback_urb (hcd, urb); ++ ++ /* Check the queue once more if the URB returned with error, because we ++ didn't do it before the completion function because the specification ++ states that the queue should not restart until all it's unlinked ++ URBs have been fully retired, with the completion functions run */ ++ if(crisv10_hcd->running) { ++ /* Only process queue if USB controller is running */ ++ tc_dma_process_queue(epid); ++ } else { ++ tc_warn("No processing of queue for epid:%d, USB Controller not running\n", ++ epid); ++ } ++ ++ DBFEXIT; ++} ++ ++static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, ++ int status) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ int epid, i; ++ volatile int timeout = 10000; ++ ++ ASSERT(urb_priv); ++ epid = urb_priv->epid; ++ ++ ASSERT(usb_pipeisoc(urb->pipe)); ++ ++ /* Set that all isoc packets have status and length set before ++ completing the urb. */ ++ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){ ++ urb->iso_frame_desc[i].actual_length = 0; ++ urb->iso_frame_desc[i].status = -EPROTO; ++ } ++ ++ /* Check if the URB is currently active (done or error) */ ++ if(urb == activeUrbList[epid]) { ++ /* Check if there are another In Isoc URB queued for this epid */ ++ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) { ++ /* Move it from queue to active and mark it started so Isoc transfers ++ won't be interrupted. ++ All Isoc URBs data transfers are already added to DMA lists so we ++ don't have to insert anything in DMA lists here. */ ++ activeUrbList[epid] = urb_list_first(epid); ++ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state = ++ STARTED; ++ urb_list_del(activeUrbList[epid], epid); ++ ++ if(urb->status) { ++ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" ++ " status:%d, new waiting URB:0x%x[%d]\n", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb_priv->isoc_packet_counter, ++ urb->number_of_packets, urb->status, ++ (unsigned int)activeUrbList[epid], ++ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num); ++ } ++ ++ } else { /* No other URB queued for this epid */ ++ if(urb->status) { ++ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" ++ " status:%d, no new URB waiting\n", ++ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), ++ str_type(urb->pipe), urb_priv->isoc_packet_counter, ++ urb->number_of_packets, urb->status); ++ } ++ ++ /* Check if EP is still enabled, then shut it down. */ ++ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid); ++ ++ /* Should only occur for In Isoc EPs where SB isn't consumed. */ ++ ASSERT(usb_pipein(urb->pipe)); ++ ++ /* Disable it and wait for it to stop */ ++ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); ++ ++ /* Ah, the luxury of busy-wait. */ ++ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid); ++ } ++ } ++ ++ /* Unlink SB to say that epid is finished. */ ++ TxIsocEPList[epid].sub = 0; ++ TxIsocEPList[epid].hw_len = 0; ++ ++ /* No URB active for EP anymore */ ++ activeUrbList[epid] = NULL; ++ } ++ } else { /* Finishing of not active URB (queued up with SBs thought) */ ++ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d," ++ " SB queued but not active\n", ++ (unsigned int)urb, str_dir(urb->pipe), ++ urb_priv->isoc_packet_counter, urb->number_of_packets, ++ urb->status); ++ if(usb_pipeout(urb->pipe)) { ++ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */ ++ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb; ++ ++ iter_sb = TxIsocEPList[epid].sub ? ++ phys_to_virt(TxIsocEPList[epid].sub) : 0; ++ prev_sb = 0; ++ ++ /* SB that is linked before this URBs first SB */ ++ while (iter_sb && (iter_sb != urb_priv->first_sb)) { ++ prev_sb = iter_sb; ++ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; ++ } ++ ++ if (iter_sb == 0) { ++ /* Unlink of the URB currently being transmitted. */ ++ prev_sb = 0; ++ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; ++ } ++ ++ while (iter_sb && (iter_sb != urb_priv->last_sb)) { ++ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; ++ } ++ ++ if (iter_sb) { ++ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; ++ } else { ++ /* This should only happen if the DMA has completed ++ processing the SB list for this EP while interrupts ++ are disabled. */ ++ isoc_dbg("Isoc urb not found, already sent?\n"); ++ next_sb = 0; ++ } ++ if (prev_sb) { ++ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; ++ } else { ++ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; ++ } ++ } ++ } ++ ++ /* Free HC-private URB data*/ ++ urb_priv_free(hcd, urb); ++ ++ usb_release_bandwidth(urb->dev, urb, 0); ++ ++ /* Hand the URB from HCD to its USB device driver, using its completion ++ functions */ ++ usb_hcd_giveback_urb (hcd, urb); ++} ++ ++static __u32 urb_num = 0; ++ ++/* allocate and initialize URB private data */ ++static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, ++ int mem_flags) { ++ struct crisv10_urb_priv *urb_priv; ++ ++ urb_priv = kmalloc(sizeof *urb_priv, mem_flags); ++ if (!urb_priv) ++ return -ENOMEM; ++ memset(urb_priv, 0, sizeof *urb_priv); ++ ++ urb_priv->epid = epid; ++ urb_priv->urb_state = NOT_STARTED; ++ ++ urb->hcpriv = urb_priv; ++ /* Assign URB a sequence number, and increment counter */ ++ urb_priv->urb_num = urb_num; ++ urb_num++; ++ return 0; ++} ++ ++/* free URB private data */ ++static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) { ++ int i; ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ ASSERT(urb_priv != 0); ++ ++ /* Check it has any SBs linked that needs to be freed*/ ++ if(urb_priv->first_sb != NULL) { ++ struct USB_SB_Desc *next_sb, *first_sb, *last_sb; ++ int i = 0; ++ first_sb = urb_priv->first_sb; ++ last_sb = urb_priv->last_sb; ++ ASSERT(last_sb); ++ while(first_sb != last_sb) { ++ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next); ++ kmem_cache_free(usb_desc_cache, first_sb); ++ first_sb = next_sb; ++ i++; ++ } ++ kmem_cache_free(usb_desc_cache, last_sb); ++ i++; ++ } ++ ++ /* Check if it has any EPs in its Intr pool that also needs to be freed */ ++ if(urb_priv->intr_ep_pool_length > 0) { ++ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) { ++ kfree(urb_priv->intr_ep_pool[i]); ++ } ++ /* ++ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n", ++ urb_priv->intr_ep_pool_length, (unsigned int)urb); ++ */ ++ } ++ ++ kfree(urb_priv); ++ urb->hcpriv = NULL; ++} ++ ++static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) { ++ struct crisv10_ep_priv *ep_priv; ++ ++ ep_priv = kmalloc(sizeof *ep_priv, mem_flags); ++ if (!ep_priv) ++ return -ENOMEM; ++ memset(ep_priv, 0, sizeof *ep_priv); ++ ++ ep->hcpriv = ep_priv; ++ return 0; ++} ++ ++static void ep_priv_free(struct usb_host_endpoint *ep) { ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ ASSERT(ep_priv); ++ kfree(ep_priv); ++ ep->hcpriv = NULL; ++} ++ ++/* EPID handling functions, managing EP-list in Etrax through wrappers */ ++/* ------------------------------------------------------------------- */ ++ ++/* Sets up a new EPID for an endpoint or returns existing if found */ ++static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, ++ int mem_flags) { ++ int epid; ++ char devnum, endpoint, out_traffic, slow; ++ int maxlen; ++ __u32 epid_data; ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ ++ DBFENTER; ++ ++ /* Check if a valid epid already is setup for this endpoint */ ++ if(ep_priv != NULL) { ++ return ep_priv->epid; ++ } ++ ++ /* We must find and initiate a new epid for this urb. */ ++ epid = tc_allocate_epid(); ++ ++ if (epid == -1) { ++ /* Failed to allocate a new epid. */ ++ DBFEXIT; ++ return epid; ++ } ++ ++ /* We now have a new epid to use. Claim it. */ ++ epid_state[epid].inuse = 1; ++ ++ /* Init private data for new endpoint */ ++ if(ep_priv_create(ep, mem_flags) != 0) { ++ return -ENOMEM; ++ } ++ ep_priv = ep->hcpriv; ++ ep_priv->epid = epid; ++ ++ devnum = usb_pipedevice(urb->pipe); ++ endpoint = usb_pipeendpoint(urb->pipe); ++ slow = (urb->dev->speed == USB_SPEED_LOW); ++ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); ++ ++ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { ++ /* We want both IN and OUT control traffic to be put on the same ++ EP/SB list. */ ++ out_traffic = 1; ++ } else { ++ out_traffic = usb_pipeout(urb->pipe); ++ } ++ ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | ++ /* FIXME: Change any to the actual port? */ ++ IO_STATE(R_USB_EPT_DATA_ISO, port, any) | ++ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | ++ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | ++ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); ++ etrax_epid_iso_set(epid, epid_data); ++ } else { ++ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) | ++ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | ++ /* FIXME: Change any to the actual port? */ ++ IO_STATE(R_USB_EPT_DATA, port, any) | ++ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | ++ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | ++ IO_FIELD(R_USB_EPT_DATA, dev, devnum); ++ etrax_epid_set(epid, epid_data); ++ } ++ ++ epid_state[epid].out_traffic = out_traffic; ++ epid_state[epid].type = usb_pipetype(urb->pipe); ++ ++ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n", ++ (unsigned int)ep, epid, devnum, endpoint, maxlen, ++ str_type(urb->pipe), out_traffic ? "out" : "in", ++ slow ? "low" : "full"); ++ ++ /* Enable Isoc eof interrupt if we set up the first Isoc epid */ ++ if(usb_pipeisoc(urb->pipe)) { ++ isoc_epid_counter++; ++ if(isoc_epid_counter == 1) { ++ isoc_warn("Enabled Isoc eof interrupt\n"); ++ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); ++ } ++ } ++ ++ DBFEXIT; ++ return epid; ++} ++ ++static void tc_free_epid(struct usb_host_endpoint *ep) { ++ unsigned long flags; ++ struct crisv10_ep_priv *ep_priv = ep->hcpriv; ++ int epid; ++ volatile int timeout = 10000; ++ ++ DBFENTER; ++ ++ if (ep_priv == NULL) { ++ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep); ++ DBFEXIT; ++ return; ++ } ++ ++ epid = ep_priv->epid; ++ ++ /* Disable Isoc eof interrupt if we free the last Isoc epid */ ++ if(epid_isoc(epid)) { ++ ASSERT(isoc_epid_counter > 0); ++ isoc_epid_counter--; ++ if(isoc_epid_counter == 0) { ++ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); ++ isoc_warn("Disabled Isoc eof interrupt\n"); ++ } ++ } ++ ++ /* Take lock manualy instead of in epid_x_x wrappers, ++ because we need to be polling here */ ++ spin_lock_irqsave(&etrax_epid_lock, flags); ++ ++ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); ++ nop(); ++ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for epid:%d to drop hold\n", epid); ++ } ++ /* This will, among other things, set the valid field to 0. */ ++ *R_USB_EPT_DATA = 0; ++ spin_unlock_irqrestore(&etrax_epid_lock, flags); ++ ++ /* Free resource in software state info list */ ++ epid_state[epid].inuse = 0; ++ ++ /* Free private endpoint data */ ++ ep_priv_free(ep); ++ ++ DBFEXIT; ++} ++ ++static int tc_allocate_epid(void) { ++ int i; ++ DBFENTER; ++ for (i = 0; i < NBR_OF_EPIDS; i++) { ++ if (!epid_inuse(i)) { ++ DBFEXIT; ++ return i; ++ } ++ } ++ ++ tc_warn("Found no free epids\n"); ++ DBFEXIT; ++ return -1; ++} ++ ++ ++/* Wrappers around the list functions (include/linux/list.h). */ ++/* ---------------------------------------------------------- */ ++static inline int __urb_list_empty(int epid) { ++ int retval; ++ retval = list_empty(&urb_list[epid]); ++ return retval; ++} ++ ++/* Returns first urb for this epid, or NULL if list is empty. */ ++static inline struct urb *urb_list_first(int epid) { ++ unsigned long flags; ++ struct urb *first_urb = 0; ++ spin_lock_irqsave(&urb_list_lock, flags); ++ if (!__urb_list_empty(epid)) { ++ /* Get the first urb (i.e. head->next). */ ++ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); ++ first_urb = urb_entry->urb; ++ } ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return first_urb; ++} ++ ++/* Adds an urb_entry last in the list for this epid. */ ++static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) { ++ unsigned long flags; ++ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags); ++ ASSERT(urb_entry); ++ ++ urb_entry->urb = urb; ++ spin_lock_irqsave(&urb_list_lock, flags); ++ list_add_tail(&urb_entry->list, &urb_list[epid]); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++} ++ ++/* Search through the list for an element that contains this urb. (The list ++ is expected to be short and the one we are about to delete will often be ++ the first in the list.) ++ Should be protected by spin_locks in calling function */ ++static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { ++ struct list_head *entry; ++ struct list_head *tmp; ++ urb_entry_t *urb_entry; ++ ++ list_for_each_safe(entry, tmp, &urb_list[epid]) { ++ urb_entry = list_entry(entry, urb_entry_t, list); ++ ASSERT(urb_entry); ++ ASSERT(urb_entry->urb); ++ ++ if (urb_entry->urb == urb) { ++ return urb_entry; ++ } ++ } ++ return 0; ++} ++ ++/* Same function as above but for global use. Protects list by spinlock */ ++static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return (urb_entry); ++} ++ ++/* Delete an urb from the list. */ ++static inline void urb_list_del(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ ++ /* Delete entry and free. */ ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ ASSERT(urb_entry); ++ ++ list_del(&urb_entry->list); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ kfree(urb_entry); ++} ++ ++/* Move an urb to the end of the list. */ ++static inline void urb_list_move_last(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ ASSERT(urb_entry); ++ ++ list_del(&urb_entry->list); ++ list_add_tail(&urb_entry->list, &urb_list[epid]); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++} ++ ++/* Get the next urb in the list. */ ++static inline struct urb *urb_list_next(struct urb *urb, int epid) { ++ unsigned long flags; ++ urb_entry_t *urb_entry; ++ ++ spin_lock_irqsave(&urb_list_lock, flags); ++ urb_entry = __urb_list_entry(urb, epid); ++ ASSERT(urb_entry); ++ ++ if (urb_entry->list.next != &urb_list[epid]) { ++ struct list_head *elem = urb_entry->list.next; ++ urb_entry = list_entry(elem, urb_entry_t, list); ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return urb_entry->urb; ++ } else { ++ spin_unlock_irqrestore(&urb_list_lock, flags); ++ return NULL; ++ } ++} ++ ++struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc, ++ int mem_flags) { ++ struct USB_EP_Desc *ep_desc; ++ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags); ++ if(ep_desc == NULL) ++ return NULL; ++ memset(ep_desc, 0, sizeof(struct USB_EP_Desc)); ++ ++ ep_desc->hw_len = 0; ++ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | ++ IO_STATE(USB_EP_command, enable, yes)); ++ if(sb_desc == NULL) { ++ ep_desc->sub = 0; ++ } else { ++ ep_desc->sub = virt_to_phys(sb_desc); ++ } ++ return ep_desc; ++} ++ ++#define TT_ZOUT 0 ++#define TT_IN 1 ++#define TT_OUT 2 ++#define TT_SETUP 3 ++ ++#define CMD_EOL IO_STATE(USB_SB_command, eol, yes) ++#define CMD_INTR IO_STATE(USB_SB_command, intr, yes) ++#define CMD_FULL IO_STATE(USB_SB_command, full, yes) ++ ++/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT ++ SBs. Also used by create_sb_in() to avoid same allocation procedure at two ++ places */ ++struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data, ++ int datalen, int mem_flags) { ++ struct USB_SB_Desc *sb_desc; ++ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); ++ if(sb_desc == NULL) ++ return NULL; ++ memset(sb_desc, 0, sizeof(struct USB_SB_Desc)); ++ ++ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) | ++ IO_STATE(USB_SB_command, eot, yes); ++ ++ sb_desc->sw_len = datalen; ++ if(data != NULL) { ++ sb_desc->buf = virt_to_phys(data); ++ } else { ++ sb_desc->buf = 0; ++ } ++ if(sb_prev != NULL) { ++ sb_prev->next = virt_to_phys(sb_desc); ++ } ++ return sb_desc; ++} ++ ++/* Creates a copy of an existing SB by allocation space for it and copy ++ settings */ ++struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) { ++ struct USB_SB_Desc *sb_desc; ++ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); ++ if(sb_desc == NULL) ++ return NULL; ++ ++ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc)); ++ return sb_desc; ++} ++ ++/* A specific create_sb function for creation of in SBs. This is due to ++ that datalen in In SBs shows how many packets we are expecting. It also ++ sets up the rem field to show if how many bytes we expect in last packet ++ if it's not a full one */ ++struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen, ++ int maxlen, int mem_flags) { ++ struct USB_SB_Desc *sb_desc; ++ sb_desc = create_sb(sb_prev, TT_IN, NULL, ++ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags); ++ if(sb_desc == NULL) ++ return NULL; ++ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen); ++ return sb_desc; ++} ++ ++void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) { ++ sb_desc->command |= flags; ++} ++ ++int create_sb_for_urb(struct urb *urb, int mem_flags) { ++ int is_out = !usb_pipein(urb->pipe); ++ int type = usb_pipetype(urb->pipe); ++ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out); ++ int buf_len = urb->transfer_buffer_length; ++ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL; ++ struct USB_SB_Desc *sb_desc = NULL; ++ ++ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv != NULL); ++ ++ switch(type) { ++ case PIPE_CONTROL: ++ /* Setup stage */ ++ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ set_sb_cmds(sb_desc, CMD_FULL); ++ ++ /* Attach first SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ ++ if (is_out) { /* Out Control URB */ ++ /* If this Control OUT transfer has an optional data stage we add ++ an OUT token before the mandatory IN (status) token */ ++ if ((buf_len > 0) && buf) { ++ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ ++ /* Status stage */ ++ /* The data length has to be exactly 1. This is due to a requirement ++ of the USB specification that a host must be prepared to receive ++ data in the status phase */ ++ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ } else { /* In control URB */ ++ /* Data stage */ ++ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ ++ /* Status stage */ ++ /* Read comment at zout_buffer declaration for an explanation to this. */ ++ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ /* Set descriptor interrupt flag for in URBs so we can finish URB after ++ zout-packet has been sent */ ++ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL); ++ } ++ /* Set end-of-list flag in last SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ /* Attach last SB to URB */ ++ urb_priv->last_sb = sb_desc; ++ break; ++ ++ case PIPE_BULK: ++ if (is_out) { /* Out Bulk URB */ ++ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ /* The full field is set to yes, even if we don't actually check that ++ this is a full-length transfer (i.e., that transfer_buffer_length % ++ maxlen = 0). ++ Setting full prevents the USB controller from sending an empty packet ++ in that case. However, if URB_ZERO_PACKET was set we want that. */ ++ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ } else { /* In Bulk URB */ ++ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ } ++ /* Set end-of-list flag for last SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ ++ /* Attach SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ urb_priv->last_sb = sb_desc; ++ break; ++ ++ case PIPE_INTERRUPT: ++ if(is_out) { /* Out Intr URB */ ++ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ ++ /* The full field is set to yes, even if we don't actually check that ++ this is a full-length transfer (i.e., that transfer_buffer_length % ++ maxlen = 0). ++ Setting full prevents the USB controller from sending an empty packet ++ in that case. However, if URB_ZERO_PACKET was set we want that. */ ++ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ /* Only generate TX interrupt if it's a Out URB*/ ++ set_sb_cmds(sb_desc, CMD_INTR); ++ ++ } else { /* In Intr URB */ ++ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ } ++ /* Set end-of-list flag for last SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ ++ /* Attach SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ urb_priv->last_sb = sb_desc; ++ ++ break; ++ case PIPE_ISOCHRONOUS: ++ if(is_out) { /* Out Isoc URB */ ++ int i; ++ if(urb->number_of_packets == 0) { ++ tc_err("Can't create SBs for Isoc URB with zero packets\n"); ++ return -EPIPE; ++ } ++ /* Create one SB descriptor for each packet and link them together. */ ++ for(i = 0; i < urb->number_of_packets; i++) { ++ if (urb->iso_frame_desc[i].length > 0) { ++ ++ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer + ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ ++ /* Check if it's a full length packet */ ++ if (urb->iso_frame_desc[i].length == ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ ++ } else { /* zero length packet */ ++ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ set_sb_cmds(sb_desc, CMD_FULL); ++ } ++ /* Attach first SB descriptor to URB */ ++ if (i == 0) { ++ urb_priv->first_sb = sb_desc; ++ } ++ } ++ /* Set interrupt and end-of-list flags in last SB */ ++ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL); ++ /* Attach last SB descriptor to URB */ ++ urb_priv->last_sb = sb_desc; ++ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n", ++ urb->number_of_packets, (unsigned int)urb); ++ } else { /* In Isoc URB */ ++ /* Actual number of packets is not relevant for periodic in traffic as ++ long as it is more than zero. Set to 1 always. */ ++ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); ++ if(sb_desc == NULL) ++ return -ENOMEM; ++ /* Set end-of-list flags for SB */ ++ set_sb_cmds(sb_desc, CMD_EOL); ++ ++ /* Attach SB to URB */ ++ urb_priv->first_sb = sb_desc; ++ urb_priv->last_sb = sb_desc; ++ } ++ break; ++ default: ++ tc_err("Unknown pipe-type\n"); ++ return -EPIPE; ++ break; ++ } ++ return 0; ++} ++ ++int init_intr_urb(struct urb *urb, int mem_flags) { ++ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ struct USB_EP_Desc* ep_desc; ++ int interval; ++ int i; ++ int ep_count; ++ ++ ASSERT(urb_priv != NULL); ++ ASSERT(usb_pipeint(urb->pipe)); ++ /* We can't support interval longer than amount of eof descriptors in ++ TxIntrEPList */ ++ if(urb->interval > MAX_INTR_INTERVAL) { ++ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval, ++ MAX_INTR_INTERVAL); ++ return -EINVAL; ++ } ++ ++ /* We assume that the SB descriptors already have been setup */ ++ ASSERT(urb_priv->first_sb != NULL); ++ ++ /* Round of the interval to 2^n, it is obvious that this code favours ++ smaller numbers, but that is actually a good thing */ ++ /* FIXME: The "rounding error" for larger intervals will be quite ++ large. For in traffic this shouldn't be a problem since it will only ++ mean that we "poll" more often. */ ++ interval = urb->interval; ++ for (i = 0; interval; i++) { ++ interval = interval >> 1; ++ } ++ urb_priv->interval = 1 << (i - 1); ++ ++ /* We can only have max interval for Out Interrupt due to that we can only ++ handle one linked in EP for a certain epid in the Intr descr array at the ++ time. The USB Controller in the Etrax 100LX continues to process Intr EPs ++ so we have no way of knowing which one that caused the actual transfer if ++ we have several linked in. */ ++ if(usb_pipeout(urb->pipe)) { ++ urb_priv->interval = MAX_INTR_INTERVAL; ++ } ++ ++ /* Calculate amount of EPs needed */ ++ ep_count = MAX_INTR_INTERVAL / urb_priv->interval; ++ ++ for(i = 0; i < ep_count; i++) { ++ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags); ++ if(ep_desc == NULL) { ++ /* Free any descriptors that we may have allocated before failure */ ++ while(i > 0) { ++ i--; ++ kfree(urb_priv->intr_ep_pool[i]); ++ } ++ return -ENOMEM; ++ } ++ urb_priv->intr_ep_pool[i] = ep_desc; ++ } ++ urb_priv->intr_ep_pool_length = ep_count; ++ return 0; ++} ++ ++/* DMA RX/TX functions */ ++/* ----------------------- */ ++ ++static void tc_dma_init_rx_list(void) { ++ int i; ++ ++ /* Setup descriptor list except last one */ ++ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { ++ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; ++ RxDescList[i].command = 0; ++ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); ++ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); ++ RxDescList[i].hw_len = 0; ++ RxDescList[i].status = 0; ++ ++ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as ++ USB_IN_Desc for the relevant fields.) */ ++ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); ++ ++ } ++ /* Special handling of last descriptor */ ++ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; ++ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); ++ RxDescList[i].next = virt_to_phys(&RxDescList[0]); ++ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); ++ RxDescList[i].hw_len = 0; ++ RxDescList[i].status = 0; ++ ++ /* Setup list pointers that show progress in list */ ++ myNextRxDesc = &RxDescList[0]; ++ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; ++ ++ flush_etrax_cache(); ++ /* Point DMA to first descriptor in list and start it */ ++ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); ++ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); ++} ++ ++ ++static void tc_dma_init_tx_bulk_list(void) { ++ int i; ++ volatile struct USB_EP_Desc *epDescr; ++ ++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { ++ epDescr = &(TxBulkEPList[i]); ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]); ++ ++ /* Initiate two EPs, disabled and with the eol flag set. No need for any ++ preserved epid. */ ++ ++ /* The first one has the intr flag set so we get an interrupt when the DMA ++ channel is about to become disabled. */ ++ CHECK_ALIGN(&TxBulkDummyEPList[i][0]); ++ TxBulkDummyEPList[i][0].hw_len = 0; ++ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | ++ IO_STATE(USB_EP_command, eol, yes) | ++ IO_STATE(USB_EP_command, intr, yes)); ++ TxBulkDummyEPList[i][0].sub = 0; ++ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); ++ ++ /* The second one. */ ++ CHECK_ALIGN(&TxBulkDummyEPList[i][1]); ++ TxBulkDummyEPList[i][1].hw_len = 0; ++ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | ++ IO_STATE(USB_EP_command, eol, yes)); ++ TxBulkDummyEPList[i][1].sub = 0; ++ /* The last dummy's next pointer is the same as the current EP's next pointer. */ ++ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); ++ } ++ ++ /* Special handling of last descr in list, make list circular */ ++ epDescr = &TxBulkEPList[i]; ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | ++ IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxBulkEPList[0]); ++ ++ /* Init DMA sub-channel pointers to last item in each list */ ++ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); ++ /* No point in starting the bulk channel yet. ++ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ ++} ++ ++static void tc_dma_init_tx_ctrl_list(void) { ++ int i; ++ volatile struct USB_EP_Desc *epDescr; ++ ++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { ++ epDescr = &(TxCtrlEPList[i]); ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]); ++ } ++ /* Special handling of last descr in list, make list circular */ ++ epDescr = &TxCtrlEPList[i]; ++ CHECK_ALIGN(epDescr); ++ epDescr->hw_len = 0; ++ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | ++ IO_FIELD(USB_EP_command, epid, i); ++ epDescr->sub = 0; ++ epDescr->next = virt_to_phys(&TxCtrlEPList[0]); ++ ++ /* Init DMA sub-channel pointers to last item in each list */ ++ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]); ++ /* No point in starting the ctrl channel yet. ++ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ ++} ++ ++ ++static void tc_dma_init_tx_intr_list(void) { ++ int i; ++ ++ TxIntrSB_zout.sw_len = 1; ++ TxIntrSB_zout.next = 0; ++ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); ++ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | ++ IO_STATE(USB_SB_command, tt, zout) | ++ IO_STATE(USB_SB_command, full, yes) | ++ IO_STATE(USB_SB_command, eot, yes) | ++ IO_STATE(USB_SB_command, eol, yes)); ++ ++ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { ++ CHECK_ALIGN(&TxIntrEPList[i]); ++ TxIntrEPList[i].hw_len = 0; ++ TxIntrEPList[i].command = ++ (IO_STATE(USB_EP_command, eof, yes) | ++ IO_STATE(USB_EP_command, enable, yes) | ++ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); ++ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); ++ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); ++ } ++ ++ /* Special handling of last descr in list, make list circular */ ++ CHECK_ALIGN(&TxIntrEPList[i]); ++ TxIntrEPList[i].hw_len = 0; ++ TxIntrEPList[i].command = ++ (IO_STATE(USB_EP_command, eof, yes) | ++ IO_STATE(USB_EP_command, eol, yes) | ++ IO_STATE(USB_EP_command, enable, yes) | ++ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); ++ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); ++ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); ++ ++ intr_dbg("Initiated Intr EP descriptor list\n"); ++ ++ ++ /* Connect DMA 8 sub-channel 2 to first in list */ ++ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); ++} ++ ++static void tc_dma_init_tx_isoc_list(void) { ++ int i; ++ ++ DBFENTER; ++ ++ /* Read comment at zout_buffer declaration for an explanation to this. */ ++ TxIsocSB_zout.sw_len = 1; ++ TxIsocSB_zout.next = 0; ++ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); ++ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | ++ IO_STATE(USB_SB_command, tt, zout) | ++ IO_STATE(USB_SB_command, full, yes) | ++ IO_STATE(USB_SB_command, eot, yes) | ++ IO_STATE(USB_SB_command, eol, yes)); ++ ++ /* The last isochronous EP descriptor is a dummy. */ ++ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { ++ CHECK_ALIGN(&TxIsocEPList[i]); ++ TxIsocEPList[i].hw_len = 0; ++ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); ++ TxIsocEPList[i].sub = 0; ++ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); ++ } ++ ++ CHECK_ALIGN(&TxIsocEPList[i]); ++ TxIsocEPList[i].hw_len = 0; ++ ++ /* Must enable the last EP descr to get eof interrupt. */ ++ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | ++ IO_STATE(USB_EP_command, eof, yes) | ++ IO_STATE(USB_EP_command, eol, yes) | ++ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); ++ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); ++ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); ++ ++ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); ++ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); ++} ++ ++static int tc_dma_init(struct usb_hcd *hcd) { ++ tc_dma_init_rx_list(); ++ tc_dma_init_tx_bulk_list(); ++ tc_dma_init_tx_ctrl_list(); ++ tc_dma_init_tx_intr_list(); ++ tc_dma_init_tx_isoc_list(); ++ ++ if (cris_request_dma(USB_TX_DMA_NBR, ++ "ETRAX 100LX built-in USB (Tx)", ++ DMA_VERBOSE_ON_ERROR, ++ dma_usb)) { ++ err("Could not allocate DMA ch 8 for USB"); ++ return -EBUSY; ++ } ++ ++ if (cris_request_dma(USB_RX_DMA_NBR, ++ "ETRAX 100LX built-in USB (Rx)", ++ DMA_VERBOSE_ON_ERROR, ++ dma_usb)) { ++ err("Could not allocate DMA ch 9 for USB"); ++ return -EBUSY; ++ } ++ ++ *R_IRQ_MASK2_SET = ++ /* Note that these interrupts are not used. */ ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | ++ /* Sub channel 1 (ctrl) descr. interrupts are used. */ ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | ++ /* Sub channel 3 (isoc) descr. interrupts are used. */ ++ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); ++ ++ /* Note that the dma9_descr interrupt is not used. */ ++ *R_IRQ_MASK2_SET = ++ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | ++ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); ++ ++ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0, ++ "ETRAX 100LX built-in USB (Rx)", hcd)) { ++ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); ++ return -EBUSY; ++ } ++ ++ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0, ++ "ETRAX 100LX built-in USB (Tx)", hcd)) { ++ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); ++ return -EBUSY; ++ } ++ ++ return 0; ++} ++ ++static void tc_dma_destroy(void) { ++ free_irq(ETRAX_USB_RX_IRQ, NULL); ++ free_irq(ETRAX_USB_TX_IRQ, NULL); ++ ++ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)"); ++ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)"); ++ ++} ++ ++static void tc_dma_link_intr_urb(struct urb *urb); ++ ++/* Handle processing of Bulk, Ctrl and Intr queues */ ++static void tc_dma_process_queue(int epid) { ++ struct urb *urb; ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ unsigned long flags; ++ char toggle; ++ ++ if(epid_state[epid].disabled) { ++ /* Don't process any URBs on a disabled endpoint */ ++ return; ++ } ++ ++ /* Do not disturb us while fiddling with EPs and epids */ ++ local_irq_save(flags); ++ ++ /* For bulk, Ctrl and Intr can we only have one URB active at a time for ++ a specific EP. */ ++ if(activeUrbList[epid] != NULL) { ++ /* An URB is already active on EP, skip checking queue */ ++ local_irq_restore(flags); ++ return; ++ } ++ ++ urb = urb_list_first(epid); ++ if(urb == NULL) { ++ /* No URB waiting in EP queue. Nothing do to */ ++ local_irq_restore(flags); ++ return; ++ } ++ ++ urb_priv = urb->hcpriv; ++ ASSERT(urb_priv != NULL); ++ ASSERT(urb_priv->urb_state == NOT_STARTED); ++ ASSERT(!usb_pipeisoc(urb->pipe)); ++ ++ /* Remove this URB from the queue and move it to active */ ++ activeUrbList[epid] = urb; ++ urb_list_del(urb, epid); ++ ++ urb_priv->urb_state = STARTED; ++ ++ /* Reset error counters (regardless of which direction this traffic is). */ ++ etrax_epid_clear_error(epid); ++ ++ /* Special handling of Intr EP lists */ ++ if(usb_pipeint(urb->pipe)) { ++ tc_dma_link_intr_urb(urb); ++ local_irq_restore(flags); ++ return; ++ } ++ ++ /* Software must preset the toggle bits for Bulk and Ctrl */ ++ if(usb_pipecontrol(urb->pipe)) { ++ /* Toggle bits are initialized only during setup transaction in a ++ CTRL transfer */ ++ etrax_epid_set_toggle(epid, 0, 0); ++ etrax_epid_set_toggle(epid, 1, 0); ++ } else { ++ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), ++ usb_pipeout(urb->pipe)); ++ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle); ++ } ++ ++ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n", ++ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid, ++ sblist_to_str(urb_priv->first_sb)); ++ ++ /* We start the DMA sub channel without checking if it's running or not, ++ because: ++ 1) If it's already running, issuing the start command is a nop. ++ 2) We avoid a test-and-set race condition. */ ++ switch(usb_pipetype(urb->pipe)) { ++ case PIPE_BULK: ++ /* Assert that the EP descriptor is disabled. */ ++ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); ++ ++ /* Set up and enable the EP descriptor. */ ++ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ TxBulkEPList[epid].hw_len = 0; ++ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ ++ /* Check if the dummy list is already with us (if several urbs were queued). */ ++ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) { ++ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d", ++ (unsigned long)urb, epid); ++ ++ /* We don't need to check if the DMA is at this EP or not before changing the ++ next pointer, since we will do it in one 32-bit write (EP descriptors are ++ 32-bit aligned). */ ++ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); ++ } ++ ++ restart_dma8_sub0(); ++ ++ /* Update/restart the bulk start timer since we just started the channel.*/ ++ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); ++ /* Update/restart the bulk eot timer since we just inserted traffic. */ ++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); ++ break; ++ case PIPE_CONTROL: ++ /* Assert that the EP descriptor is disabled. */ ++ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); ++ ++ /* Set up and enable the EP descriptor. */ ++ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ TxCtrlEPList[epid].hw_len = 0; ++ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ ++ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); ++ break; ++ } ++ local_irq_restore(flags); ++} ++ ++static void tc_dma_link_intr_urb(struct urb *urb) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ volatile struct USB_EP_Desc *tmp_ep; ++ struct USB_EP_Desc *ep_desc; ++ int i = 0, epid; ++ int pool_idx = 0; ++ ++ ASSERT(urb_priv != NULL); ++ epid = urb_priv->epid; ++ ASSERT(urb_priv->interval > 0); ++ ASSERT(urb_priv->intr_ep_pool_length > 0); ++ ++ tmp_ep = &TxIntrEPList[0]; ++ ++ /* Only insert one EP descriptor in list for Out Intr URBs. ++ We can only handle Out Intr with interval of 128ms because ++ it's not possible to insert several Out Intr EPs because they ++ are not consumed by the DMA. */ ++ if(usb_pipeout(urb->pipe)) { ++ ep_desc = urb_priv->intr_ep_pool[0]; ++ ASSERT(ep_desc); ++ ep_desc->next = tmp_ep->next; ++ tmp_ep->next = virt_to_phys(ep_desc); ++ i++; ++ } else { ++ /* Loop through Intr EP descriptor list and insert EP for URB at ++ specified interval */ ++ do { ++ /* Each EP descriptor with eof flag sat signals a new frame */ ++ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { ++ /* Insert a EP from URBs EP pool at correct interval */ ++ if ((i % urb_priv->interval) == 0) { ++ ep_desc = urb_priv->intr_ep_pool[pool_idx]; ++ ASSERT(ep_desc); ++ ep_desc->next = tmp_ep->next; ++ tmp_ep->next = virt_to_phys(ep_desc); ++ pool_idx++; ++ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length); ++ } ++ i++; ++ } ++ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next); ++ } while(tmp_ep != &TxIntrEPList[0]); ++ } ++ ++ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid, ++ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx); ++ ++ /* We start the DMA sub channel without checking if it's running or not, ++ because: ++ 1) If it's already running, issuing the start command is a nop. ++ 2) We avoid a test-and-set race condition. */ ++ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); ++} ++ ++static void tc_dma_process_isoc_urb(struct urb *urb) { ++ unsigned long flags; ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ int epid; ++ ++ /* Do not disturb us while fiddling with EPs and epids */ ++ local_irq_save(flags); ++ ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->first_sb); ++ epid = urb_priv->epid; ++ ++ if(activeUrbList[epid] == NULL) { ++ /* EP is idle, so make this URB active */ ++ activeUrbList[epid] = urb; ++ urb_list_del(urb, epid); ++ ASSERT(TxIsocEPList[epid].sub == 0); ++ ASSERT(!(TxIsocEPList[epid].command & ++ IO_STATE(USB_EP_command, enable, yes))); ++ ++ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/ ++ if(usb_pipein(urb->pipe)) { ++ /* Each EP for In Isoc will have only one SB descriptor, setup when ++ submitting the first active urb. We do it here by copying from URBs ++ pre-allocated SB. */ ++ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb, ++ sizeof(TxIsocSBList[epid])); ++ TxIsocEPList[epid].hw_len = 0; ++ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid])); ++ } else { ++ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */ ++ TxIsocEPList[epid].hw_len = 0; ++ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ ++ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x" ++ " last_sb::0x%x\n", ++ (unsigned int)urb, urb_priv->urb_num, epid, ++ (unsigned int)(urb_priv->first_sb), ++ (unsigned int)(urb_priv->last_sb)); ++ } ++ ++ if (urb->transfer_flags & URB_ISO_ASAP) { ++ /* The isoc transfer should be started as soon as possible. The ++ start_frame field is a return value if URB_ISO_ASAP was set. Comparing ++ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN ++ token is sent 2 frames later. I'm not sure how this affects usage of ++ the start_frame field by the device driver, or how it affects things ++ when USB_ISO_ASAP is not set, so therefore there's no compensation for ++ the 2 frame "lag" here. */ ++ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); ++ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); ++ urb_priv->urb_state = STARTED; ++ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n", ++ urb->start_frame); ++ } else { ++ /* Not started yet. */ ++ urb_priv->urb_state = NOT_STARTED; ++ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n", ++ (unsigned int)urb); ++ } ++ ++ } else { ++ /* An URB is already active on the EP. Leave URB in queue and let ++ finish_isoc_urb process it after current active URB */ ++ ASSERT(TxIsocEPList[epid].sub != 0); ++ ++ if(usb_pipein(urb->pipe)) { ++ /* Because there already is a active In URB on this epid we do nothing ++ and the finish_isoc_urb() function will handle switching to next URB*/ ++ ++ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */ ++ struct USB_SB_Desc *temp_sb_desc; ++ ++ /* Set state STARTED to all Out Isoc URBs added to SB list because we ++ don't know how many of them that are finished before descr interrupt*/ ++ urb_priv->urb_state = STARTED; ++ ++ /* Find end of current SB list by looking for SB with eol flag sat */ ++ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); ++ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != ++ IO_STATE(USB_SB_command, eol, yes)) { ++ ASSERT(temp_sb_desc->next); ++ temp_sb_desc = phys_to_virt(temp_sb_desc->next); ++ } ++ ++ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d" ++ " sub:0x%x eol:0x%x\n", ++ (unsigned int)urb, urb_priv->urb_num, ++ (unsigned int)(urb_priv->first_sb), ++ (unsigned int)(urb_priv->last_sb), epid, ++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), ++ (unsigned int)temp_sb_desc); ++ ++ /* Next pointer must be set before eol is removed. */ ++ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); ++ /* Clear the previous end of list flag since there is a new in the ++ added SB descriptor list. */ ++ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); ++ ++ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { ++ __u32 epid_data; ++ /* 8.8.5 in Designer's Reference says we should check for and correct ++ any errors in the EP here. That should not be necessary if ++ epid_attn is handled correctly, so we assume all is ok. */ ++ epid_data = etrax_epid_iso_get(epid); ++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) != ++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending" ++ " URB:0x%x[%d]\n", ++ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid, ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ ++ /* The SB list was exhausted. */ ++ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { ++ /* The new sublist did not get processed before the EP was ++ disabled. Setup the EP again. */ ++ ++ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) { ++ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted" ++ ", restarting from this URBs SB:0x%x\n", ++ epid, (unsigned int)temp_sb_desc, ++ (unsigned int)(urb_priv->first_sb)); ++ TxIsocEPList[epid].hw_len = 0; ++ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); ++ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); ++ /* Enable the EP again so data gets processed this time */ ++ TxIsocEPList[epid].command |= ++ IO_STATE(USB_EP_command, enable, yes); ++ ++ } else { ++ /* The EP has been disabled but not at end this URB (god knows ++ where). This should generate an epid_attn so we should not be ++ here */ ++ isoc_warn("EP was disabled on sb:0x%x before SB list for" ++ " URB:0x%x[%d] got processed\n", ++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ } else { ++ /* This might happend if we are slow on this function and isn't ++ an error. */ ++ isoc_dbg("EP was disabled and finished with SBs from appended" ++ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num); ++ } ++ } ++ } ++ } ++ ++ /* Start the DMA sub channel */ ++ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); ++ ++ local_irq_restore(flags); ++} ++ ++static void tc_dma_unlink_intr_urb(struct urb *urb) { ++ struct crisv10_urb_priv *urb_priv = urb->hcpriv; ++ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ ++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ ++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ ++ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from ++ the list. */ ++ int count = 0; ++ volatile int timeout = 10000; ++ int epid; ++ ++ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the ++ List". */ ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->intr_ep_pool_length > 0); ++ epid = urb_priv->epid; ++ ++ /* First disable all Intr EPs belonging to epid for this URB */ ++ first_ep = &TxIntrEPList[0]; ++ curr_ep = first_ep; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { ++ /* Disable EP */ ++ next_ep->command &= ~IO_MASK(USB_EP_command, enable); ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != first_ep); ++ ++ ++ /* Now unlink all EPs belonging to this epid from Descr list */ ++ first_ep = &TxIntrEPList[0]; ++ curr_ep = first_ep; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { ++ /* This is the one we should unlink. */ ++ unlink_ep = next_ep; ++ ++ /* Actually unlink the EP from the DMA list. */ ++ curr_ep->next = unlink_ep->next; ++ ++ /* Wait until the DMA is no longer at this descriptor. */ ++ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) && ++ (timeout-- > 0)); ++ if(timeout == 0) { ++ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n"); ++ } ++ ++ count++; ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != first_ep); ++ ++ if(count != urb_priv->intr_ep_pool_length) { ++ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count, ++ urb_priv->intr_ep_pool_length, (unsigned int)urb, ++ urb_priv->urb_num); ++ } else { ++ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count, ++ urb_priv->intr_ep_pool_length, (unsigned int)urb); ++ } ++} ++ ++static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, ++ int timer) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ __u32 epid_data; ++ ++ /* Protect TxEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ /* A finished EP descriptor is disabled and has a valid sub pointer */ ++ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && ++ (TxBulkEPList[epid].sub != 0)) { ++ ++ /* Get the active URB for this epid */ ++ urb = activeUrbList[epid]; ++ /* Sanity checks */ ++ ASSERT(urb); ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ /* Only handle finished out Bulk EPs here, ++ and let RX interrupt take care of the rest */ ++ if(!epid_out_traffic(epid)) { ++ continue; ++ } ++ ++ if(timer) { ++ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n", ++ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, ++ urb_priv->urb_num); ++ } else { ++ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n", ++ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, ++ urb_priv->urb_num); ++ } ++ ++ if(urb_priv->urb_state == UNLINK) { ++ /* This Bulk URB is requested to be unlinked, that means that the EP ++ has been disabled and we might not have sent all data */ ++ tc_finish_urb(hcd, urb, urb->status); ++ continue; ++ } ++ ++ ASSERT(urb_priv->urb_state == STARTED); ++ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { ++ tc_err("Endpoint got disabled before reaching last sb\n"); ++ } ++ ++ epid_data = etrax_epid_get(epid); ++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == ++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ /* This means that the endpoint has no error, is disabled ++ and had inserted traffic, i.e. transfer successfully completed. */ ++ tc_finish_urb(hcd, urb, 0); ++ } else { ++ /* Shouldn't happen. We expect errors to be caught by epid ++ attention. */ ++ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n", ++ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); ++ } ++ } else { ++ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid); ++ } ++ } ++ ++ local_irq_restore(flags); ++} ++ ++static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ __u32 epid_data; ++ ++ /* Protect TxEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if(epid == DUMMY_EPID) ++ continue; ++ ++ /* A finished EP descriptor is disabled and has a valid sub pointer */ ++ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) && ++ (TxCtrlEPList[epid].sub != 0)) { ++ ++ /* Get the active URB for this epid */ ++ urb = activeUrbList[epid]; ++ ++ if(urb == NULL) { ++ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid); ++ continue; ++ } ++ ++ /* Sanity checks */ ++ ASSERT(usb_pipein(urb->pipe)); ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) { ++ tc_err("Endpoint got disabled before reaching last sb\n"); ++ } ++ ++ epid_data = etrax_epid_get(epid); ++ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == ++ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { ++ /* This means that the endpoint has no error, is disabled ++ and had inserted traffic, i.e. transfer successfully completed. */ ++ ++ /* Check if RX-interrupt for In Ctrl has been processed before ++ finishing the URB */ ++ if(urb_priv->ctrl_rx_done) { ++ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n", ++ (unsigned int)urb, urb_priv->urb_num); ++ tc_finish_urb(hcd, urb, 0); ++ } else { ++ /* If we get zout descriptor interrupt before RX was done for a ++ In Ctrl transfer, then we flag that and it will be finished ++ in the RX-Interrupt */ ++ urb_priv->ctrl_zout_done = 1; ++ tc_dbg("Got zout descr interrupt before RX interrupt\n"); ++ } ++ } else { ++ /* Shouldn't happen. We expect errors to be caught by epid ++ attention. */ ++ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); ++ __dump_ep_desc(&(TxCtrlEPList[epid])); ++ __dump_ept_data(epid); ++ } ++ } ++ } ++ local_irq_restore(flags); ++} ++ ++/* This function goes through all epids that are setup for Out Isoc transfers ++ and marks (isoc_out_done) all queued URBs that the DMA has finished ++ transfer for. ++ No URB completetion is done here to make interrupt routine return quickly. ++ URBs are completed later with help of complete_isoc_bottom_half() that ++ becomes schedules when this functions is finished. */ ++static void check_finished_isoc_tx_epids(void) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ struct USB_SB_Desc* sb_desc; ++ int epid_done; ++ ++ /* Protect TxIsocEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID || ++ !epid_out_traffic(epid)) { ++ /* Nothing here to see. */ ++ continue; ++ } ++ ASSERT(epid_inuse(epid)); ++ ASSERT(epid_isoc(epid)); ++ ++ sb_desc = phys_to_virt(TxIsocEPList[epid].sub); ++ /* Find the last descriptor of the currently active URB for this ep. ++ This is the first descriptor in the sub list marked for a descriptor ++ interrupt. */ ++ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { ++ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; ++ } ++ ASSERT(sb_desc); ++ ++ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n", ++ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), ++ (unsigned int)sb_desc); ++ ++ urb = activeUrbList[epid]; ++ if(urb == NULL) { ++ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid); ++ continue; ++ } ++ ++ epid_done = 0; ++ while(urb && !epid_done) { ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); ++ ASSERT(usb_pipeout(urb->pipe)); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->urb_state == STARTED || ++ urb_priv->urb_state == UNLINK); ++ ++ if (sb_desc != urb_priv->last_sb) { ++ /* This urb has been sent. */ ++ urb_priv->isoc_out_done = 1; ++ ++ } else { /* Found URB that has last_sb as the interrupt reason */ ++ ++ /* Check if EP has been disabled, meaning that all transfers are done*/ ++ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { ++ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) == ++ IO_STATE(USB_SB_command, eol, yes)); ++ ASSERT(sb_desc->next == 0); ++ urb_priv->isoc_out_done = 1; ++ } else { ++ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n", ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ /* Stop looking any further in queue */ ++ epid_done = 1; ++ } ++ ++ if (!epid_done) { ++ if(urb == activeUrbList[epid]) { ++ urb = urb_list_first(epid); ++ } else { ++ urb = urb_list_next(urb, epid); ++ } ++ } ++ } /* END: while(urb && !epid_done) */ ++ } ++ ++ local_irq_restore(flags); ++} ++ ++ ++/* This is where the Out Isoc URBs are realy completed. This function is ++ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers ++ are done. This functions completes all URBs earlier marked with ++ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */ ++ ++static void complete_isoc_bottom_half(void *data) { ++ struct crisv10_isoc_complete_data *comp_data; ++ struct usb_iso_packet_descriptor *packet; ++ struct crisv10_urb_priv * urb_priv; ++ unsigned long flags; ++ struct urb* urb; ++ int epid_done; ++ int epid; ++ int i; ++ ++ comp_data = (struct crisv10_isoc_complete_data*)data; ++ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { ++ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) { ++ /* Only check valid Out Isoc epids */ ++ continue; ++ } ++ ++ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid, ++ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub)); ++ ++ /* The descriptor interrupt handler has marked all transmitted Out Isoc ++ URBs with isoc_out_done. Now we traverse all epids and for all that ++ have out Isoc traffic we traverse its URB list and complete the ++ transmitted URBs. */ ++ epid_done = 0; ++ while (!epid_done) { ++ ++ /* Get the active urb (if any) */ ++ urb = activeUrbList[epid]; ++ if (urb == 0) { ++ isoc_dbg("No active URB on epid:%d anymore\n", epid); ++ epid_done = 1; ++ continue; ++ } ++ ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); ++ ASSERT(usb_pipeout(urb->pipe)); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ if (!(urb_priv->isoc_out_done)) { ++ /* We have reached URB that isn't flaged done yet, stop traversing. */ ++ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d" ++ " before not yet flaged URB:0x%x[%d]\n", ++ epid, (unsigned int)urb, urb_priv->urb_num); ++ epid_done = 1; ++ continue; ++ } ++ ++ /* This urb has been sent. */ ++ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n", ++ (unsigned int)urb, urb_priv->urb_num); ++ ++ /* Set ok on transfered packets for this URB and finish it */ ++ for (i = 0; i < urb->number_of_packets; i++) { ++ packet = &urb->iso_frame_desc[i]; ++ packet->status = 0; ++ packet->actual_length = packet->length; ++ } ++ urb_priv->isoc_packet_counter = urb->number_of_packets; ++ tc_finish_urb(comp_data->hcd, urb, 0); ++ ++ } /* END: while(!epid_done) */ ++ } /* END: for(epid...) */ ++ ++ local_irq_restore(flags); ++ kmem_cache_free(isoc_compl_cache, comp_data); ++} ++ ++ ++static void check_finished_intr_tx_epids(struct usb_hcd *hcd) { ++ unsigned long flags; ++ int epid; ++ struct urb *urb; ++ struct crisv10_urb_priv * urb_priv; ++ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ ++ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ ++ ++ /* Protect TxintrEPList */ ++ local_irq_save(flags); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) { ++ /* Nothing to see on this epid. Only check valid Out Intr epids */ ++ continue; ++ } ++ ++ urb = activeUrbList[epid]; ++ if(urb == 0) { ++ intr_warn("Found Out Intr epid:%d with no active URB\n", epid); ++ continue; ++ } ++ ++ /* Sanity check. */ ++ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT); ++ ASSERT(usb_pipeout(urb->pipe)); ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ++ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs ++ are inserted.*/ ++ curr_ep = &TxIntrEPList[0]; ++ do { ++ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); ++ if(next_ep == urb_priv->intr_ep_pool[0]) { ++ /* We found the Out Intr EP for this epid */ ++ ++ /* Disable it so it doesn't get processed again */ ++ next_ep->command &= ~IO_MASK(USB_EP_command, enable); ++ ++ /* Finish the active Out Intr URB with status OK */ ++ tc_finish_urb(hcd, urb, 0); ++ } ++ curr_ep = phys_to_virt(curr_ep->next); ++ } while (curr_ep != &TxIntrEPList[1]); ++ ++ } ++ local_irq_restore(flags); ++} ++ ++/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */ ++static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) { ++ struct usb_hcd *hcd = (struct usb_hcd*)vhc; ++ ASSERT(hcd); ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); ++ restart_dma8_sub0(); ++ } ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); ++ check_finished_ctrl_tx_epids(hcd); ++ } ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); ++ check_finished_intr_tx_epids(hcd); ++ } ++ ++ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { ++ struct crisv10_isoc_complete_data* comp_data; ++ ++ /* Flag done Out Isoc for later completion */ ++ check_finished_isoc_tx_epids(); ++ ++ /* Clear this interrupt */ ++ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); ++ /* Schedule bottom half of Out Isoc completion function. This function ++ finishes the URBs marked with isoc_out_done */ ++ comp_data = (struct crisv10_isoc_complete_data*) ++ kmem_cache_alloc(isoc_compl_cache, SLAB_ATOMIC); ++ ASSERT(comp_data != NULL); ++ comp_data ->hcd = hcd; ++ ++ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data); ++ schedule_work(&comp_data->usb_bh); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */ ++static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) { ++ unsigned long flags; ++ struct urb *urb; ++ struct usb_hcd *hcd = (struct usb_hcd*)vhc; ++ struct crisv10_urb_priv *urb_priv; ++ int epid = 0; ++ int real_error; ++ ++ ASSERT(hcd); ++ ++ /* Clear this interrupt. */ ++ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); ++ ++ /* Custom clear interrupt for this interrupt */ ++ /* The reason we cli here is that we call the driver's callback functions. */ ++ local_irq_save(flags); ++ ++ /* Note that this while loop assumes that all packets span only ++ one rx descriptor. */ ++ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { ++ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); ++ /* Get the active URB for this epid */ ++ urb = activeUrbList[epid]; ++ ++ ASSERT(epid_inuse(epid)); ++ if (!urb) { ++ dma_err("No urb for epid %d in rx interrupt\n", epid); ++ goto skip_out; ++ } ++ ++ /* Check if any errors on epid */ ++ real_error = 0; ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { ++ __u32 r_usb_ept_data; ++ ++ if (usb_pipeisoc(urb->pipe)) { ++ r_usb_ept_data = etrax_epid_iso_get(epid); ++ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && ++ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && ++ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { ++ /* Not an error, just a failure to receive an expected iso ++ in packet in this frame. This is not documented ++ in the designers reference. Continue processing. ++ */ ++ } else real_error = 1; ++ } else real_error = 1; ++ } ++ ++ if(real_error) { ++ dma_err("Error in RX descr on epid:%d for URB 0x%x", ++ epid, (unsigned int)urb); ++ dump_ept_data(epid); ++ dump_in_desc(myNextRxDesc); ++ goto skip_out; ++ } ++ ++ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; ++ ASSERT(urb_priv); ++ ASSERT(urb_priv->urb_state == STARTED || ++ urb_priv->urb_state == UNLINK); ++ ++ if ((usb_pipetype(urb->pipe) == PIPE_BULK) || ++ (usb_pipetype(urb->pipe) == PIPE_CONTROL) || ++ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { ++ ++ /* We get nodata for empty data transactions, and the rx descriptor's ++ hw_len field is not valid in that case. No data to copy in other ++ words. */ ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { ++ /* No data to copy */ ++ } else { ++ /* ++ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n", ++ (unsigned int)urb, epid, myNextRxDesc->hw_len, ++ urb_priv->rx_offset); ++ */ ++ /* Only copy data if URB isn't flaged to be unlinked*/ ++ if(urb_priv->urb_state != UNLINK) { ++ /* Make sure the data fits in the buffer. */ ++ if(urb_priv->rx_offset + myNextRxDesc->hw_len ++ <= urb->transfer_buffer_length) { ++ ++ /* Copy the data to URBs buffer */ ++ memcpy(urb->transfer_buffer + urb_priv->rx_offset, ++ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); ++ urb_priv->rx_offset += myNextRxDesc->hw_len; ++ } else { ++ /* Signal overflow when returning URB */ ++ urb->status = -EOVERFLOW; ++ tc_finish_urb_later(hcd, urb, urb->status); ++ } ++ } ++ } ++ ++ /* Check if it was the last packet in the transfer */ ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { ++ /* Special handling for In Ctrl URBs. */ ++ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) && ++ !(urb_priv->ctrl_zout_done)) { ++ /* Flag that RX part of Ctrl transfer is done. Because zout descr ++ interrupt hasn't happend yet will the URB be finished in the ++ TX-Interrupt. */ ++ urb_priv->ctrl_rx_done = 1; ++ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting" ++ " for zout\n", (unsigned int)urb); ++ } else { ++ tc_finish_urb(hcd, urb, 0); ++ } ++ } ++ } else { /* ISOC RX */ ++ /* ++ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n", ++ epid, (unsigned int)urb); ++ */ ++ ++ struct usb_iso_packet_descriptor *packet; ++ ++ if (urb_priv->urb_state == UNLINK) { ++ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n"); ++ goto skip_out; ++ } else if (urb_priv->urb_state == NOT_STARTED) { ++ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n"); ++ goto skip_out; ++ } ++ ++ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; ++ ASSERT(packet); ++ packet->status = 0; ++ ++ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { ++ /* We get nodata for empty data transactions, and the rx descriptor's ++ hw_len field is not valid in that case. We copy 0 bytes however to ++ stay in synch. */ ++ packet->actual_length = 0; ++ } else { ++ packet->actual_length = myNextRxDesc->hw_len; ++ /* Make sure the data fits in the buffer. */ ++ ASSERT(packet->actual_length <= packet->length); ++ memcpy(urb->transfer_buffer + packet->offset, ++ phys_to_virt(myNextRxDesc->buf), packet->actual_length); ++ if(packet->actual_length > 0) ++ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n", ++ packet->actual_length, urb_priv->isoc_packet_counter, ++ (unsigned int)urb, urb_priv->urb_num); ++ } ++ ++ /* Increment the packet counter. */ ++ urb_priv->isoc_packet_counter++; ++ ++ /* Note that we don't care about the eot field in the rx descriptor's ++ status. It will always be set for isoc traffic. */ ++ if (urb->number_of_packets == urb_priv->isoc_packet_counter) { ++ /* Complete the urb with status OK. */ ++ tc_finish_urb(hcd, urb, 0); ++ } ++ } ++ ++ skip_out: ++ myNextRxDesc->status = 0; ++ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol); ++ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); ++ myLastRxDesc = myNextRxDesc; ++ myNextRxDesc = phys_to_virt(myNextRxDesc->next); ++ flush_etrax_cache(); ++ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart); ++ } ++ ++ local_irq_restore(flags); ++ ++ return IRQ_HANDLED; ++} ++ ++static void tc_bulk_start_timer_func(unsigned long dummy) { ++ /* We might enable an EP descriptor behind the current DMA position when ++ it's about to decide that there are no more bulk traffic and it should ++ stop the bulk channel. ++ Therefore we periodically check if the bulk channel is stopped and there ++ is an enabled bulk EP descriptor, in which case we start the bulk ++ channel. */ ++ ++ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { ++ int epid; ++ ++ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n"); ++ ++ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { ++ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { ++ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n", ++ epid); ++ restart_dma8_sub0(); ++ ++ /* Restart the bulk eot timer since we just started the bulk channel.*/ ++ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); ++ ++ /* No need to search any further. */ ++ break; ++ } ++ } ++ } else { ++ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n"); ++ } ++} ++ ++static void tc_bulk_eot_timer_func(unsigned long dummy) { ++ struct usb_hcd *hcd = (struct usb_hcd*)dummy; ++ ASSERT(hcd); ++ /* Because of a race condition in the top half, we might miss a bulk eot. ++ This timer "simulates" a bulk eot if we don't get one for a while, ++ hopefully correcting the situation. */ ++ timer_dbg("bulk_eot_timer timed out.\n"); ++ check_finished_bulk_tx_epids(hcd, 1); ++} ++ ++ ++/*************************************************************/ ++/*************************************************************/ ++/* Device driver block */ ++/*************************************************************/ ++/*************************************************************/ ++ ++/* Forward declarations for device driver functions */ ++static int devdrv_hcd_probe(struct device *); ++static int devdrv_hcd_remove(struct device *); ++#ifdef CONFIG_PM ++static int devdrv_hcd_suspend(struct device *, u32, u32); ++static int devdrv_hcd_resume(struct device *, u32); ++#endif /* CONFIG_PM */ ++ ++/* the device */ ++static struct platform_device *devdrv_hc_platform_device; ++ ++/* device driver interface */ ++static struct device_driver devdrv_hc_device_driver = { ++ .name = (char *) hc_name, ++ .bus = &platform_bus_type, ++ ++ .probe = devdrv_hcd_probe, ++ .remove = devdrv_hcd_remove, ++ ++#ifdef CONFIG_PM ++ .suspend = devdrv_hcd_suspend, ++ .resume = devdrv_hcd_resume, ++#endif /* CONFIG_PM */ ++}; ++ ++/* initialize the host controller and driver */ ++static int __init_or_module devdrv_hcd_probe(struct device *dev) ++{ ++ struct usb_hcd *hcd; ++ struct crisv10_hcd *crisv10_hcd; ++ int retval; ++ ++ /* Check DMA burst length */ ++ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) != ++ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) { ++ devdrv_err("Invalid DMA burst length in Etrax 100LX," ++ " needs to be 32\n"); ++ return -EPERM; ++ } ++ ++ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id); ++ if (!hcd) ++ return -ENOMEM; ++ ++ crisv10_hcd = hcd_to_crisv10_hcd(hcd); ++ spin_lock_init(&crisv10_hcd->lock); ++ crisv10_hcd->num_ports = num_ports(); ++ crisv10_hcd->running = 0; ++ ++ dev_set_drvdata(dev, crisv10_hcd); ++ ++ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ, ++ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ); ++ ++ /* Print out chip version read from registers */ ++ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major); ++ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor); ++ if(rev_min == 0) { ++ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj); ++ } else { ++ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min); ++ } ++ ++ devdrv_info("Bulk timer interval, start:%d eot:%d\n", ++ BULK_START_TIMER_INTERVAL, ++ BULK_EOT_TIMER_INTERVAL); ++ ++ ++ /* Init root hub data structures */ ++ if(rh_init()) { ++ devdrv_err("Failed init data for Root Hub\n"); ++ retval = -ENOMEM; ++ } ++ ++ if(port_in_use(0)) { ++ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) { ++ printk(KERN_CRIT "usb-host: request IO interface usb1 failed"); ++ retval = -EBUSY; ++ goto out; ++ } ++ devdrv_info("Claimed interface for USB physical port 1\n"); ++ } ++ if(port_in_use(1)) { ++ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) { ++ /* Free first interface if second failed to be claimed */ ++ if(port_in_use(0)) { ++ cris_free_io_interface(if_usb_1); ++ } ++ printk(KERN_CRIT "usb-host: request IO interface usb2 failed"); ++ retval = -EBUSY; ++ goto out; ++ } ++ devdrv_info("Claimed interface for USB physical port 2\n"); ++ } ++ ++ /* Init transfer controller structs and locks */ ++ if((retval = tc_init(hcd)) != 0) { ++ goto out; ++ } ++ ++ /* Attach interrupt functions for DMA and init DMA controller */ ++ if((retval = tc_dma_init(hcd)) != 0) { ++ goto out; ++ } ++ ++ /* Attach the top IRQ handler for USB controller interrupts */ ++ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0, ++ "ETRAX 100LX built-in USB (HC)", hcd)) { ++ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); ++ retval = -EBUSY; ++ goto out; ++ } ++ ++ /* iso_eof is only enabled when isoc traffic is running. */ ++ *R_USB_IRQ_MASK_SET = ++ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */ ++ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | ++ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | ++ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | ++ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); ++ ++ ++ crisv10_ready_wait(); ++ /* Reset the USB interface. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); ++ ++ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to ++ 0x2A30 (10800), to guarantee that control traffic gets 10% of the ++ bandwidth, and periodic transfer may allocate the rest (90%). ++ This doesn't work though. ++ The value 11960 is chosen to be just after the SOF token, with a couple ++ of bit times extra for possible bit stuffing. */ ++ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); ++ ++ crisv10_ready_wait(); ++ /* Configure the USB interface as a host controller. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); ++ ++ ++ /* Check so controller not busy before enabling ports */ ++ crisv10_ready_wait(); ++ ++ /* Enable selected USB ports */ ++ if(port_in_use(0)) { ++ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); ++ } else { ++ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); ++ } ++ if(port_in_use(1)) { ++ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); ++ } else { ++ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); ++ } ++ ++ crisv10_ready_wait(); ++ /* Start processing of USB traffic. */ ++ *R_USB_COMMAND = ++ IO_STATE(R_USB_COMMAND, port_sel, nop) | ++ IO_STATE(R_USB_COMMAND, port_cmd, reset) | ++ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); ++ ++ /* Do not continue probing initialization before USB interface is done */ ++ crisv10_ready_wait(); ++ ++ /* Register our Host Controller to USB Core ++ * Finish the remaining parts of generic HCD initialization: allocate the ++ * buffers of consistent memory, register the bus ++ * and call the driver's reset() and start() routines. */ ++ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED); ++ if (retval != 0) { ++ devdrv_err("Failed registering HCD driver\n"); ++ goto out; ++ } ++ ++ return 0; ++ ++ out: ++ devdrv_hcd_remove(dev); ++ return retval; ++} ++ ++ ++/* cleanup after the host controller and driver */ ++static int __init_or_module devdrv_hcd_remove(struct device *dev) ++{ ++ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev); ++ struct usb_hcd *hcd; ++ ++ if (!crisv10_hcd) ++ return 0; ++ hcd = crisv10_hcd_to_hcd(crisv10_hcd); ++ ++ ++ /* Stop USB Controller in Etrax 100LX */ ++ crisv10_hcd_reset(hcd); ++ ++ usb_remove_hcd(hcd); ++ devdrv_dbg("Removed HCD from USB Core\n"); ++ ++ /* Free USB Controller IRQ */ ++ free_irq(ETRAX_USB_HC_IRQ, NULL); ++ ++ /* Free resources */ ++ tc_dma_destroy(); ++ tc_destroy(); ++ ++ ++ if(port_in_use(0)) { ++ cris_free_io_interface(if_usb_1); ++ } ++ if(port_in_use(1)) { ++ cris_free_io_interface(if_usb_2); ++ } ++ ++ devdrv_dbg("Freed all claimed resources\n"); ++ ++ return 0; ++} ++ ++ ++#ifdef CONFIG_PM ++ ++static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level) ++{ ++ return 0; /* no-op for now */ ++} ++ ++static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level) ++{ ++ return 0; /* no-op for now */ ++} ++ ++#endif /* CONFIG_PM */ ++ ++ ++ ++/*************************************************************/ ++/*************************************************************/ ++/* Module block */ ++/*************************************************************/ ++/*************************************************************/ ++ ++/* register driver */ ++static int __init module_hcd_init(void) ++{ ++ ++ if (usb_disabled()) ++ return -ENODEV; ++ ++ /* Here we select enabled ports by following defines created from ++ menuconfig */ ++#ifndef CONFIG_ETRAX_USB_HOST_PORT1 ++ ports &= ~(1<<0); ++#endif ++#ifndef CONFIG_ETRAX_USB_HOST_PORT2 ++ ports &= ~(1<<1); ++#endif ++ ++ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc); ++ ++ devdrv_hc_platform_device = ++ platform_device_register_simple((char *) hc_name, 0, NULL, 0); ++ ++ if (IS_ERR(devdrv_hc_platform_device)) ++ return PTR_ERR(devdrv_hc_platform_device); ++ return driver_register(&devdrv_hc_device_driver); ++ /* ++ * Note that we do not set the DMA mask for the device, ++ * i.e. we pretend that we will use PIO, since no specific ++ * allocation routines are needed for DMA buffers. This will ++ * cause the HCD buffer allocation routines to fall back to ++ * kmalloc(). ++ */ ++} ++ ++/* unregister driver */ ++static void __exit module_hcd_exit(void) ++{ ++ driver_unregister(&devdrv_hc_device_driver); ++} ++ ++ ++/* Module hooks */ ++module_init(module_hcd_init); ++module_exit(module_hcd_exit); +--- linux-2.6.19.2.orig/drivers/usb/host/hc_crisv10.h 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/usb/host/hc_crisv10.h 1970-01-01 01:00:00.000000000 +0100 +@@ -1,289 +0,0 @@ +-#ifndef __LINUX_ETRAX_USB_H +-#define __LINUX_ETRAX_USB_H +- +-#include <linux/types.h> +-#include <linux/list.h> +- +-typedef struct USB_IN_Desc { +- volatile __u16 sw_len; +- volatile __u16 command; +- volatile unsigned long next; +- volatile unsigned long buf; +- volatile __u16 hw_len; +- volatile __u16 status; +-} USB_IN_Desc_t; +- +-typedef struct USB_SB_Desc { +- volatile __u16 sw_len; +- volatile __u16 command; +- volatile unsigned long next; +- volatile unsigned long buf; +- __u32 dummy; +-} USB_SB_Desc_t; +- +-typedef struct USB_EP_Desc { +- volatile __u16 hw_len; +- volatile __u16 command; +- volatile unsigned long sub; +- volatile unsigned long next; +- __u32 dummy; +-} USB_EP_Desc_t; +- +-struct virt_root_hub { +- int devnum; +- void *urb; +- void *int_addr; +- int send; +- int interval; +- int numports; +- struct timer_list rh_int_timer; +- volatile __u16 wPortChange_1; +- volatile __u16 wPortChange_2; +- volatile __u16 prev_wPortStatus_1; +- volatile __u16 prev_wPortStatus_2; +-}; +- +-struct etrax_usb_intr_traffic { +- int sleeping; +- int error; +- struct wait_queue *wq; +-}; +- +-typedef struct etrax_usb_hc { +- struct usb_bus *bus; +- struct virt_root_hub rh; +- struct etrax_usb_intr_traffic intr; +-} etrax_hc_t; +- +-typedef enum { +- STARTED, +- NOT_STARTED, +- UNLINK, +- TRANSFER_DONE, +- WAITING_FOR_DESCR_INTR +-} etrax_usb_urb_state_t; +- +- +- +-typedef struct etrax_usb_urb_priv { +- /* The first_sb field is used for freeing all SB descriptors belonging +- to an urb. The corresponding ep descriptor's sub pointer cannot be +- used for this since the DMA advances the sub pointer as it processes +- the sb list. */ +- USB_SB_Desc_t *first_sb; +- /* The last_sb field referes to the last SB descriptor that belongs to +- this urb. This is important to know so we can free the SB descriptors +- that ranges between first_sb and last_sb. */ +- USB_SB_Desc_t *last_sb; +- +- /* The rx_offset field is used in ctrl and bulk traffic to keep track +- of the offset in the urb's transfer_buffer where incoming data should be +- copied to. */ +- __u32 rx_offset; +- +- /* Counter used in isochronous transfers to keep track of the +- number of packets received/transmitted. */ +- __u32 isoc_packet_counter; +- +- /* This field is used to pass information about the urb's current state between +- the various interrupt handlers (thus marked volatile). */ +- volatile etrax_usb_urb_state_t urb_state; +- +- /* Connection between the submitted urb and ETRAX epid number */ +- __u8 epid; +- +- /* The rx_data_list field is used for periodic traffic, to hold +- received data for later processing in the the complete_urb functions, +- where the data us copied to the urb's transfer_buffer. Basically, we +- use this intermediate storage because we don't know when it's safe to +- reuse the transfer_buffer (FIXME?). */ +- struct list_head rx_data_list; +-} etrax_urb_priv_t; +- +-/* This struct is for passing data from the top half to the bottom half. */ +-typedef struct usb_interrupt_registers +-{ +- etrax_hc_t *hc; +- __u32 r_usb_epid_attn; +- __u8 r_usb_status; +- __u16 r_usb_rh_port_status_1; +- __u16 r_usb_rh_port_status_2; +- __u32 r_usb_irq_mask_read; +- __u32 r_usb_fm_number; +- struct work_struct usb_bh; +-} usb_interrupt_registers_t; +- +-/* This struct is for passing data from the isoc top half to the isoc bottom half. */ +-typedef struct usb_isoc_complete_data +-{ +- struct urb *urb; +- struct work_struct usb_bh; +-} usb_isoc_complete_data_t; +- +-/* This struct holds data we get from the rx descriptors for DMA channel 9 +- for periodic traffic (intr and isoc). */ +-typedef struct rx_data +-{ +- void *data; +- int length; +- struct list_head list; +-} rx_data_t; +- +-typedef struct urb_entry +-{ +- struct urb *urb; +- struct list_head list; +-} urb_entry_t; +- +-/* --------------------------------------------------------------------------- +- Virtual Root HUB +- ------------------------------------------------------------------------- */ +-/* destination of request */ +-#define RH_INTERFACE 0x01 +-#define RH_ENDPOINT 0x02 +-#define RH_OTHER 0x03 +- +-#define RH_CLASS 0x20 +-#define RH_VENDOR 0x40 +- +-/* Requests: bRequest << 8 | bmRequestType */ +-#define RH_GET_STATUS 0x0080 +-#define RH_CLEAR_FEATURE 0x0100 +-#define RH_SET_FEATURE 0x0300 +-#define RH_SET_ADDRESS 0x0500 +-#define RH_GET_DESCRIPTOR 0x0680 +-#define RH_SET_DESCRIPTOR 0x0700 +-#define RH_GET_CONFIGURATION 0x0880 +-#define RH_SET_CONFIGURATION 0x0900 +-#define RH_GET_STATE 0x0280 +-#define RH_GET_INTERFACE 0x0A80 +-#define RH_SET_INTERFACE 0x0B00 +-#define RH_SYNC_FRAME 0x0C80 +-/* Our Vendor Specific Request */ +-#define RH_SET_EP 0x2000 +- +- +-/* Hub port features */ +-#define RH_PORT_CONNECTION 0x00 +-#define RH_PORT_ENABLE 0x01 +-#define RH_PORT_SUSPEND 0x02 +-#define RH_PORT_OVER_CURRENT 0x03 +-#define RH_PORT_RESET 0x04 +-#define RH_PORT_POWER 0x08 +-#define RH_PORT_LOW_SPEED 0x09 +-#define RH_C_PORT_CONNECTION 0x10 +-#define RH_C_PORT_ENABLE 0x11 +-#define RH_C_PORT_SUSPEND 0x12 +-#define RH_C_PORT_OVER_CURRENT 0x13 +-#define RH_C_PORT_RESET 0x14 +- +-/* Hub features */ +-#define RH_C_HUB_LOCAL_POWER 0x00 +-#define RH_C_HUB_OVER_CURRENT 0x01 +- +-#define RH_DEVICE_REMOTE_WAKEUP 0x00 +-#define RH_ENDPOINT_STALL 0x01 +- +-/* Our Vendor Specific feature */ +-#define RH_REMOVE_EP 0x00 +- +- +-#define RH_ACK 0x01 +-#define RH_REQ_ERR -1 +-#define RH_NACK 0x00 +- +-/* Field definitions for */ +- +-#define USB_IN_command__eol__BITNR 0 /* command macros */ +-#define USB_IN_command__eol__WIDTH 1 +-#define USB_IN_command__eol__no 0 +-#define USB_IN_command__eol__yes 1 +- +-#define USB_IN_command__intr__BITNR 3 +-#define USB_IN_command__intr__WIDTH 1 +-#define USB_IN_command__intr__no 0 +-#define USB_IN_command__intr__yes 1 +- +-#define USB_IN_status__eop__BITNR 1 /* status macros. */ +-#define USB_IN_status__eop__WIDTH 1 +-#define USB_IN_status__eop__no 0 +-#define USB_IN_status__eop__yes 1 +- +-#define USB_IN_status__eot__BITNR 5 +-#define USB_IN_status__eot__WIDTH 1 +-#define USB_IN_status__eot__no 0 +-#define USB_IN_status__eot__yes 1 +- +-#define USB_IN_status__error__BITNR 6 +-#define USB_IN_status__error__WIDTH 1 +-#define USB_IN_status__error__no 0 +-#define USB_IN_status__error__yes 1 +- +-#define USB_IN_status__nodata__BITNR 7 +-#define USB_IN_status__nodata__WIDTH 1 +-#define USB_IN_status__nodata__no 0 +-#define USB_IN_status__nodata__yes 1 +- +-#define USB_IN_status__epid__BITNR 8 +-#define USB_IN_status__epid__WIDTH 5 +- +-#define USB_EP_command__eol__BITNR 0 +-#define USB_EP_command__eol__WIDTH 1 +-#define USB_EP_command__eol__no 0 +-#define USB_EP_command__eol__yes 1 +- +-#define USB_EP_command__eof__BITNR 1 +-#define USB_EP_command__eof__WIDTH 1 +-#define USB_EP_command__eof__no 0 +-#define USB_EP_command__eof__yes 1 +- +-#define USB_EP_command__intr__BITNR 3 +-#define USB_EP_command__intr__WIDTH 1 +-#define USB_EP_command__intr__no 0 +-#define USB_EP_command__intr__yes 1 +- +-#define USB_EP_command__enable__BITNR 4 +-#define USB_EP_command__enable__WIDTH 1 +-#define USB_EP_command__enable__no 0 +-#define USB_EP_command__enable__yes 1 +- +-#define USB_EP_command__hw_valid__BITNR 5 +-#define USB_EP_command__hw_valid__WIDTH 1 +-#define USB_EP_command__hw_valid__no 0 +-#define USB_EP_command__hw_valid__yes 1 +- +-#define USB_EP_command__epid__BITNR 8 +-#define USB_EP_command__epid__WIDTH 5 +- +-#define USB_SB_command__eol__BITNR 0 /* command macros. */ +-#define USB_SB_command__eol__WIDTH 1 +-#define USB_SB_command__eol__no 0 +-#define USB_SB_command__eol__yes 1 +- +-#define USB_SB_command__eot__BITNR 1 +-#define USB_SB_command__eot__WIDTH 1 +-#define USB_SB_command__eot__no 0 +-#define USB_SB_command__eot__yes 1 +- +-#define USB_SB_command__intr__BITNR 3 +-#define USB_SB_command__intr__WIDTH 1 +-#define USB_SB_command__intr__no 0 +-#define USB_SB_command__intr__yes 1 +- +-#define USB_SB_command__tt__BITNR 4 +-#define USB_SB_command__tt__WIDTH 2 +-#define USB_SB_command__tt__zout 0 +-#define USB_SB_command__tt__in 1 +-#define USB_SB_command__tt__out 2 +-#define USB_SB_command__tt__setup 3 +- +- +-#define USB_SB_command__rem__BITNR 8 +-#define USB_SB_command__rem__WIDTH 6 +- +-#define USB_SB_command__full__BITNR 6 +-#define USB_SB_command__full__WIDTH 1 +-#define USB_SB_command__full__no 0 +-#define USB_SB_command__full__yes 1 +- +-#endif +--- linux-2.6.19.2.orig/drivers/usb/host/hc-crisv10.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/usb/host/hc-crisv10.h 2006-01-27 13:59:58.000000000 +0100 +@@ -0,0 +1,330 @@ ++#ifndef __LINUX_ETRAX_USB_H ++#define __LINUX_ETRAX_USB_H ++ ++#include <linux/types.h> ++#include <linux/list.h> ++ ++struct USB_IN_Desc { ++ volatile __u16 sw_len; ++ volatile __u16 command; ++ volatile unsigned long next; ++ volatile unsigned long buf; ++ volatile __u16 hw_len; ++ volatile __u16 status; ++}; ++ ++struct USB_SB_Desc { ++ volatile __u16 sw_len; ++ volatile __u16 command; ++ volatile unsigned long next; ++ volatile unsigned long buf; ++}; ++ ++struct USB_EP_Desc { ++ volatile __u16 hw_len; ++ volatile __u16 command; ++ volatile unsigned long sub; ++ volatile unsigned long next; ++}; ++ ++ ++/* Root Hub port status struct */ ++struct crisv10_rh { ++ volatile __u16 wPortChange[2]; ++ volatile __u16 wPortStatusPrev[2]; ++}; ++ ++/* HCD description */ ++struct crisv10_hcd { ++ spinlock_t lock; ++ __u8 num_ports; ++ __u8 running; ++}; ++ ++ ++/* Endpoint HC private data description */ ++struct crisv10_ep_priv { ++ int epid; ++}; ++ ++/* Additional software state info for a USB Controller epid */ ++struct etrax_epid { ++ __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */ ++ __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */ ++ __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */ ++ __u8 out_traffic; /* !0 = This epid is for out traffic */ ++}; ++ ++/* Struct to hold information of scheduled later URB completion */ ++struct urb_later_data { ++ struct work_struct ws; ++ struct usb_hcd *hcd; ++ struct urb *urb; ++ int urb_num; ++ int status; ++}; ++ ++ ++typedef enum { ++ STARTED, ++ NOT_STARTED, ++ UNLINK, ++} crisv10_urb_state_t; ++ ++ ++struct crisv10_urb_priv { ++ /* Sequence number for this URB. Every new submited URB gets this from ++ a incrementing counter. Used when a URB is scheduled for later finish to ++ be sure that the intended URB hasn't already been completed (device ++ drivers has a tendency to reuse URBs once they are completed, causing us ++ to not be able to single old ones out only based on the URB pointer.) */ ++ __u32 urb_num; ++ ++ /* The first_sb field is used for freeing all SB descriptors belonging ++ to an urb. The corresponding ep descriptor's sub pointer cannot be ++ used for this since the DMA advances the sub pointer as it processes ++ the sb list. */ ++ struct USB_SB_Desc *first_sb; ++ ++ /* The last_sb field referes to the last SB descriptor that belongs to ++ this urb. This is important to know so we can free the SB descriptors ++ that ranges between first_sb and last_sb. */ ++ struct USB_SB_Desc *last_sb; ++ ++ /* The rx_offset field is used in ctrl and bulk traffic to keep track ++ of the offset in the urb's transfer_buffer where incoming data should be ++ copied to. */ ++ __u32 rx_offset; ++ ++ /* Counter used in isochronous transfers to keep track of the ++ number of packets received/transmitted. */ ++ __u32 isoc_packet_counter; ++ ++ /* Flag that marks if this Isoc Out URB has finished it's transfer. Used ++ because several URBs can be finished before list is processed */ ++ __u8 isoc_out_done; ++ ++ /* This field is used to pass information about the urb's current state ++ between the various interrupt handlers (thus marked volatile). */ ++ volatile crisv10_urb_state_t urb_state; ++ ++ /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT. ++ When DMA8 sub-channel 2 has processed the SB list for this sequence we ++ get a interrupt. We also get a interrupt for In transfers and which ++ one of these interrupts that comes first depends of data size and device. ++ To be sure that we have got both interrupts before we complete the URB ++ we have these to flags that shows which part that has completed. ++ We can then check when we get one of the interrupts that if the other has ++ occured it's safe for us to complete the URB, otherwise we set appropriate ++ flag and do the completion when we get the other interrupt. */ ++ volatile unsigned char ctrl_zout_done; ++ volatile unsigned char ctrl_rx_done; ++ ++ /* Connection between the submitted urb and ETRAX epid number */ ++ __u8 epid; ++ ++ /* The rx_data_list field is used for periodic traffic, to hold ++ received data for later processing in the the complete_urb functions, ++ where the data us copied to the urb's transfer_buffer. Basically, we ++ use this intermediate storage because we don't know when it's safe to ++ reuse the transfer_buffer (FIXME?). */ ++ struct list_head rx_data_list; ++ ++ ++ /* The interval time rounded up to closest 2^N */ ++ int interval; ++ ++ /* Pool of EP descriptors needed if it's a INTR transfer. ++ Amount of EPs in pool correspons to how many INTR that should ++ be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */ ++ struct USB_EP_Desc* intr_ep_pool[128]; ++ ++ /* The mount of EPs allocated for this INTR URB */ ++ int intr_ep_pool_length; ++ ++ /* Pointer to info struct if URB is scheduled to be finished later */ ++ struct urb_later_data* later_data; ++}; ++ ++ ++/* This struct is for passing data from the top half to the bottom half irq ++ handlers */ ++struct crisv10_irq_reg { ++ struct usb_hcd* hcd; ++ __u32 r_usb_epid_attn; ++ __u8 r_usb_status; ++ __u16 r_usb_rh_port_status_1; ++ __u16 r_usb_rh_port_status_2; ++ __u32 r_usb_irq_mask_read; ++ __u32 r_usb_fm_number; ++ struct work_struct usb_bh; ++}; ++ ++ ++/* This struct is for passing data from the isoc top half to the isoc bottom ++ half. */ ++struct crisv10_isoc_complete_data { ++ struct usb_hcd *hcd; ++ struct urb *urb; ++ struct work_struct usb_bh; ++}; ++ ++/* Entry item for URB lists for each endpint */ ++typedef struct urb_entry ++{ ++ struct urb *urb; ++ struct list_head list; ++} urb_entry_t; ++ ++/* --------------------------------------------------------------------------- ++ Virtual Root HUB ++ ------------------------------------------------------------------------- */ ++/* destination of request */ ++#define RH_INTERFACE 0x01 ++#define RH_ENDPOINT 0x02 ++#define RH_OTHER 0x03 ++ ++#define RH_CLASS 0x20 ++#define RH_VENDOR 0x40 ++ ++/* Requests: bRequest << 8 | bmRequestType */ ++#define RH_GET_STATUS 0x0080 ++#define RH_CLEAR_FEATURE 0x0100 ++#define RH_SET_FEATURE 0x0300 ++#define RH_SET_ADDRESS 0x0500 ++#define RH_GET_DESCRIPTOR 0x0680 ++#define RH_SET_DESCRIPTOR 0x0700 ++#define RH_GET_CONFIGURATION 0x0880 ++#define RH_SET_CONFIGURATION 0x0900 ++#define RH_GET_STATE 0x0280 ++#define RH_GET_INTERFACE 0x0A80 ++#define RH_SET_INTERFACE 0x0B00 ++#define RH_SYNC_FRAME 0x0C80 ++/* Our Vendor Specific Request */ ++#define RH_SET_EP 0x2000 ++ ++ ++/* Hub port features */ ++#define RH_PORT_CONNECTION 0x00 ++#define RH_PORT_ENABLE 0x01 ++#define RH_PORT_SUSPEND 0x02 ++#define RH_PORT_OVER_CURRENT 0x03 ++#define RH_PORT_RESET 0x04 ++#define RH_PORT_POWER 0x08 ++#define RH_PORT_LOW_SPEED 0x09 ++#define RH_C_PORT_CONNECTION 0x10 ++#define RH_C_PORT_ENABLE 0x11 ++#define RH_C_PORT_SUSPEND 0x12 ++#define RH_C_PORT_OVER_CURRENT 0x13 ++#define RH_C_PORT_RESET 0x14 ++ ++/* Hub features */ ++#define RH_C_HUB_LOCAL_POWER 0x00 ++#define RH_C_HUB_OVER_CURRENT 0x01 ++ ++#define RH_DEVICE_REMOTE_WAKEUP 0x00 ++#define RH_ENDPOINT_STALL 0x01 ++ ++/* Our Vendor Specific feature */ ++#define RH_REMOVE_EP 0x00 ++ ++ ++#define RH_ACK 0x01 ++#define RH_REQ_ERR -1 ++#define RH_NACK 0x00 ++ ++/* Field definitions for */ ++ ++#define USB_IN_command__eol__BITNR 0 /* command macros */ ++#define USB_IN_command__eol__WIDTH 1 ++#define USB_IN_command__eol__no 0 ++#define USB_IN_command__eol__yes 1 ++ ++#define USB_IN_command__intr__BITNR 3 ++#define USB_IN_command__intr__WIDTH 1 ++#define USB_IN_command__intr__no 0 ++#define USB_IN_command__intr__yes 1 ++ ++#define USB_IN_status__eop__BITNR 1 /* status macros. */ ++#define USB_IN_status__eop__WIDTH 1 ++#define USB_IN_status__eop__no 0 ++#define USB_IN_status__eop__yes 1 ++ ++#define USB_IN_status__eot__BITNR 5 ++#define USB_IN_status__eot__WIDTH 1 ++#define USB_IN_status__eot__no 0 ++#define USB_IN_status__eot__yes 1 ++ ++#define USB_IN_status__error__BITNR 6 ++#define USB_IN_status__error__WIDTH 1 ++#define USB_IN_status__error__no 0 ++#define USB_IN_status__error__yes 1 ++ ++#define USB_IN_status__nodata__BITNR 7 ++#define USB_IN_status__nodata__WIDTH 1 ++#define USB_IN_status__nodata__no 0 ++#define USB_IN_status__nodata__yes 1 ++ ++#define USB_IN_status__epid__BITNR 8 ++#define USB_IN_status__epid__WIDTH 5 ++ ++#define USB_EP_command__eol__BITNR 0 ++#define USB_EP_command__eol__WIDTH 1 ++#define USB_EP_command__eol__no 0 ++#define USB_EP_command__eol__yes 1 ++ ++#define USB_EP_command__eof__BITNR 1 ++#define USB_EP_command__eof__WIDTH 1 ++#define USB_EP_command__eof__no 0 ++#define USB_EP_command__eof__yes 1 ++ ++#define USB_EP_command__intr__BITNR 3 ++#define USB_EP_command__intr__WIDTH 1 ++#define USB_EP_command__intr__no 0 ++#define USB_EP_command__intr__yes 1 ++ ++#define USB_EP_command__enable__BITNR 4 ++#define USB_EP_command__enable__WIDTH 1 ++#define USB_EP_command__enable__no 0 ++#define USB_EP_command__enable__yes 1 ++ ++#define USB_EP_command__hw_valid__BITNR 5 ++#define USB_EP_command__hw_valid__WIDTH 1 ++#define USB_EP_command__hw_valid__no 0 ++#define USB_EP_command__hw_valid__yes 1 ++ ++#define USB_EP_command__epid__BITNR 8 ++#define USB_EP_command__epid__WIDTH 5 ++ ++#define USB_SB_command__eol__BITNR 0 /* command macros. */ ++#define USB_SB_command__eol__WIDTH 1 ++#define USB_SB_command__eol__no 0 ++#define USB_SB_command__eol__yes 1 ++ ++#define USB_SB_command__eot__BITNR 1 ++#define USB_SB_command__eot__WIDTH 1 ++#define USB_SB_command__eot__no 0 ++#define USB_SB_command__eot__yes 1 ++ ++#define USB_SB_command__intr__BITNR 3 ++#define USB_SB_command__intr__WIDTH 1 ++#define USB_SB_command__intr__no 0 ++#define USB_SB_command__intr__yes 1 ++ ++#define USB_SB_command__tt__BITNR 4 ++#define USB_SB_command__tt__WIDTH 2 ++#define USB_SB_command__tt__zout 0 ++#define USB_SB_command__tt__in 1 ++#define USB_SB_command__tt__out 2 ++#define USB_SB_command__tt__setup 3 ++ ++ ++#define USB_SB_command__rem__BITNR 8 ++#define USB_SB_command__rem__WIDTH 6 ++ ++#define USB_SB_command__full__BITNR 6 ++#define USB_SB_command__full__WIDTH 1 ++#define USB_SB_command__full__no 0 ++#define USB_SB_command__full__yes 1 ++ ++#endif +diff -urN linux-2.6.19.2.orig/drivers/net/cris/Makefile linux-2.6.19.2.dev/drivers/net/cris/Makefile +--- linux-2.6.19.2.orig/drivers/net/cris/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/net/cris/Makefile 2005-01-04 13:09:12.000000000 +0100 +@@ -1 +1,2 @@ + obj-$(CONFIG_ETRAX_ARCH_V10) += eth_v10.o ++obj-$(CONFIG_ETRAX_ARCH_V32) += eth_v32.o +diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c +--- linux-2.6.19.2.orig/drivers/net/cris/eth_v10.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/net/cris/eth_v10.c 2007-01-15 16:35:48.000000000 +0100 +@@ -1,221 +1,10 @@ +-/* $Id: ethernet.c,v 1.31 2004/10/18 14:49:03 starvik Exp $ +- * +- * e100net.c: A network driver for the ETRAX 100LX network controller. ++/* ++ * Driver for the ETRAX 100LX network controller. + * +- * Copyright (c) 1998-2002 Axis Communications AB. ++ * Copyright (c) 1998-2006 Axis Communications AB. + * + * The outline of this driver comes from skeleton.c. + * +- * $Log: ethernet.c,v $ +- * Revision 1.31 2004/10/18 14:49:03 starvik +- * Use RX interrupt as random source +- * +- * Revision 1.30 2004/09/29 10:44:04 starvik +- * Enabed MAC-address output again +- * +- * Revision 1.29 2004/08/24 07:14:05 starvik +- * Make use of generic MDIO interface and constants. +- * +- * Revision 1.28 2004/08/20 09:37:11 starvik +- * Added support for Intel LXT972A. Creds to Randy Scarborough. +- * +- * Revision 1.27 2004/08/16 12:37:22 starvik +- * Merge of Linux 2.6.8 +- * +- * Revision 1.25 2004/06/21 10:29:57 starvik +- * Merge of Linux 2.6.7 +- * +- * Revision 1.23 2004/06/09 05:29:22 starvik +- * Avoid any race where R_DMA_CH1_FIRST is NULL (may trigger cache bug). +- * +- * Revision 1.22 2004/05/14 07:58:03 starvik +- * Merge of changes from 2.4 +- * +- * Revision 1.20 2004/03/11 11:38:40 starvik +- * Merge of Linux 2.6.4 +- * +- * Revision 1.18 2003/12/03 13:45:46 starvik +- * Use hardware pad for short packets to prevent information leakage. +- * +- * Revision 1.17 2003/07/04 08:27:37 starvik +- * Merge of Linux 2.5.74 +- * +- * Revision 1.16 2003/04/24 08:28:22 starvik +- * New LED behaviour: LED off when no link +- * +- * Revision 1.15 2003/04/09 05:20:47 starvik +- * Merge of Linux 2.5.67 +- * +- * Revision 1.13 2003/03/06 16:11:01 henriken +- * Off by one error in group address register setting. +- * +- * Revision 1.12 2003/02/27 17:24:19 starvik +- * Corrected Rev to Revision +- * +- * Revision 1.11 2003/01/24 09:53:21 starvik +- * Oops. Initialize GA to 0, not to 1 +- * +- * Revision 1.10 2003/01/24 09:50:55 starvik +- * Initialize GA_0 and GA_1 to 0 to avoid matching of unwanted packets +- * +- * Revision 1.9 2002/12/13 07:40:58 starvik +- * Added basic ethtool interface +- * Handled out of memory when allocating new buffers +- * +- * Revision 1.8 2002/12/11 13:13:57 starvik +- * Added arch/ to v10 specific includes +- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer) +- * +- * Revision 1.7 2002/11/26 09:41:42 starvik +- * Added e100_set_config (standard interface to set media type) +- * Added protection against preemptive scheduling +- * Added standard MII ioctls +- * +- * Revision 1.6 2002/11/21 07:18:18 starvik +- * Timers must be initialized in 2.5.48 +- * +- * Revision 1.5 2002/11/20 11:56:11 starvik +- * Merge of Linux 2.5.48 +- * +- * Revision 1.4 2002/11/18 07:26:46 starvik +- * Linux 2.5 port of latest Linux 2.4 ethernet driver +- * +- * Revision 1.33 2002/10/02 20:16:17 hp +- * SETF, SETS: Use underscored IO_x_ macros rather than incorrect token concatenation +- * +- * Revision 1.32 2002/09/16 06:05:58 starvik +- * Align memory returned by dev_alloc_skb +- * Moved handling of sent packets to interrupt to avoid reference counting problem +- * +- * Revision 1.31 2002/09/10 13:28:23 larsv +- * Return -EINVAL for unknown ioctls to avoid confusing tools that tests +- * for supported functionality by issuing special ioctls, i.e. wireless +- * extensions. +- * +- * Revision 1.30 2002/05/07 18:50:08 johana +- * Correct spelling in comments. +- * +- * Revision 1.29 2002/05/06 05:38:49 starvik +- * Performance improvements: +- * Large packets are not copied (breakpoint set to 256 bytes) +- * The cache bug workaround is delayed until half of the receive list +- * has been used +- * Added transmit list +- * Transmit interrupts are only enabled when transmit queue is full +- * +- * Revision 1.28.2.1 2002/04/30 08:15:51 starvik +- * Performance improvements: +- * Large packets are not copied (breakpoint set to 256 bytes) +- * The cache bug workaround is delayed until half of the receive list +- * has been used. +- * Added transmit list +- * Transmit interrupts are only enabled when transmit queue is full +- * +- * Revision 1.28 2002/04/22 11:47:21 johana +- * Fix according to 2.4.19-pre7. time_after/time_before and +- * missing end of comment. +- * The patch has a typo for ethernet.c in e100_clear_network_leds(), +- * that is fixed here. +- * +- * Revision 1.27 2002/04/12 11:55:11 bjornw +- * Added TODO +- * +- * Revision 1.26 2002/03/15 17:11:02 bjornw +- * Use prepare_rx_descriptor after the CPU has touched the receiving descs +- * +- * Revision 1.25 2002/03/08 13:07:53 bjornw +- * Unnecessary spinlock removed +- * +- * Revision 1.24 2002/02/20 12:57:43 fredriks +- * Replaced MIN() with min(). +- * +- * Revision 1.23 2002/02/20 10:58:14 fredriks +- * Strip the Ethernet checksum (4 bytes) before forwarding a frame to upper layers. +- * +- * Revision 1.22 2002/01/30 07:48:22 matsfg +- * Initiate R_NETWORK_TR_CTRL +- * +- * Revision 1.21 2001/11/23 11:54:49 starvik +- * Added IFF_PROMISC and IFF_ALLMULTI handling in set_multicast_list +- * Removed compiler warnings +- * +- * Revision 1.20 2001/11/12 19:26:00 pkj +- * * Corrected e100_negotiate() to not assign half to current_duplex when +- * it was supposed to compare them... +- * * Cleaned up failure handling in e100_open(). +- * * Fixed compiler warnings. +- * +- * Revision 1.19 2001/11/09 07:43:09 starvik +- * Added full duplex support +- * Added ioctl to set speed and duplex +- * Clear LED timer only runs when LED is lit +- * +- * Revision 1.18 2001/10/03 14:40:43 jonashg +- * Update rx_bytes counter. +- * +- * Revision 1.17 2001/06/11 12:43:46 olof +- * Modified defines for network LED behavior +- * +- * Revision 1.16 2001/05/30 06:12:46 markusl +- * TxDesc.next should not be set to NULL +- * +- * Revision 1.15 2001/05/29 10:27:04 markusl +- * Updated after review remarks: +- * +Use IO_EXTRACT +- * +Handle underrun +- * +- * Revision 1.14 2001/05/29 09:20:14 jonashg +- * Use driver name on printk output so one can tell which driver that complains. +- * +- * Revision 1.13 2001/05/09 12:35:59 johana +- * Use DMA_NBR and IRQ_NBR defines from dma.h and irq.h +- * +- * Revision 1.12 2001/04/05 11:43:11 tobiasa +- * Check dev before panic. +- * +- * Revision 1.11 2001/04/04 11:21:05 markusl +- * Updated according to review remarks +- * +- * Revision 1.10 2001/03/26 16:03:06 bjornw +- * Needs linux/config.h +- * +- * Revision 1.9 2001/03/19 14:47:48 pkj +- * * Make sure there is always a pause after the network LEDs are +- * changed so they will not look constantly lit during heavy traffic. +- * * Always use HZ when setting times relative to jiffies. +- * * Use LED_NETWORK_SET() when setting the network LEDs. +- * +- * Revision 1.8 2001/02/27 13:52:48 bjornw +- * malloc.h -> slab.h +- * +- * Revision 1.7 2001/02/23 13:46:38 bjornw +- * Spellling check +- * +- * Revision 1.6 2001/01/26 15:21:04 starvik +- * Don't disable interrupts while reading MDIO registers (MDIO is slow) +- * Corrected promiscuous mode +- * Improved deallocation of IRQs ("ifconfig eth0 down" now works) +- * +- * Revision 1.5 2000/11/29 17:22:22 bjornw +- * Get rid of the udword types legacy stuff +- * +- * Revision 1.4 2000/11/22 16:36:09 bjornw +- * Please marketing by using the correct case when spelling Etrax. +- * +- * Revision 1.3 2000/11/21 16:43:04 bjornw +- * Minor short->int change +- * +- * Revision 1.2 2000/11/08 14:27:57 bjornw +- * 2.4 port +- * +- * Revision 1.1 2000/11/06 13:56:00 bjornw +- * Verbatim copy of the 1.24 version of e100net.c from elinux +- * +- * Revision 1.24 2000/10/04 15:55:23 bjornw +- * * Use virt_to_phys etc. for DMA addresses +- * * Removed bogus CHECKSUM_UNNECESSARY +- * +- * + */ + + +@@ -251,6 +40,7 @@ + #include <asm/bitops.h> + #include <asm/ethernet.h> + #include <asm/cache.h> ++#include <asm/arch/io_interface_mux.h> + + //#define ETHDEBUG + #define D(x) +@@ -280,6 +70,9 @@ + * by this lock as well. + */ + spinlock_t lock; ++ ++ spinlock_t led_lock; /* Protect LED state */ ++ spinlock_t transceiver_lock; /* Protect transceiver state. */ + }; + + typedef struct etrax_eth_descr +@@ -296,8 +89,6 @@ + void (*check_duplex)(struct net_device* dev); + }; + +-struct transceiver_ops* transceiver; +- + /* Duplex settings */ + enum duplex + { +@@ -308,7 +99,7 @@ + + /* Dma descriptors etc. */ + +-#define MAX_MEDIA_DATA_SIZE 1518 ++#define MAX_MEDIA_DATA_SIZE 1522 + + #define MIN_PACKET_LEN 46 + #define ETHER_HEAD_LEN 14 +@@ -332,9 +123,9 @@ + #define MDIO_TDK_DIAGNOSTIC_DPLX 0x800 + + /*Intel LXT972A specific*/ +-#define MDIO_INT_STATUS_REG_2 0x0011 +-#define MDIO_INT_FULL_DUPLEX_IND ( 1 << 9 ) +-#define MDIO_INT_SPEED ( 1 << 14 ) ++#define MDIO_INT_STATUS_REG_2 0x0011 ++#define MDIO_INT_FULL_DUPLEX_IND (1 << 9) ++#define MDIO_INT_SPEED (1 << 14) + + /* Network flash constants */ + #define NET_FLASH_TIME (HZ/50) /* 20 ms */ +@@ -345,8 +136,8 @@ + #define NO_NETWORK_ACTIVITY 0 + #define NETWORK_ACTIVITY 1 + +-#define NBR_OF_RX_DESC 64 +-#define NBR_OF_TX_DESC 256 ++#define NBR_OF_RX_DESC 32 ++#define NBR_OF_TX_DESC 16 + + /* Large packets are sent directly to upper layers while small packets are */ + /* copied (to reduce memory waste). The following constant decides the breakpoint */ +@@ -368,7 +159,6 @@ + static etrax_eth_descr *myNextRxDesc; /* Points to the next descriptor to + to be processed */ + static etrax_eth_descr *myLastRxDesc; /* The last processed descriptor */ +-static etrax_eth_descr *myPrevRxDesc; /* The descriptor right before myNextRxDesc */ + + static etrax_eth_descr RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned(32))); + +@@ -378,7 +168,6 @@ + static etrax_eth_descr TxDescList[NBR_OF_TX_DESC] __attribute__ ((aligned(32))); + + static unsigned int network_rec_config_shadow = 0; +-static unsigned int mdio_phy_addr; /* Transciever address */ + + static unsigned int network_tr_ctrl_shadow = 0; + +@@ -412,7 +201,7 @@ + static void e100_tx_timeout(struct net_device *dev); + static struct net_device_stats *e100_get_stats(struct net_device *dev); + static void set_multicast_list(struct net_device *dev); +-static void e100_hardware_send_packet(char *buf, int length); ++static void e100_hardware_send_packet(struct net_local* np, char *buf, int length); + static void update_rx_stats(struct net_device_stats *); + static void update_tx_stats(struct net_device_stats *); + static int e100_probe_transceiver(struct net_device* dev); +@@ -435,7 +224,10 @@ + static void e100_set_network_leds(int active); + + static const struct ethtool_ops e100_ethtool_ops; +- ++#if defined(CONFIG_ETRAX_NO_PHY) ++static void dummy_check_speed(struct net_device* dev); ++static void dummy_check_duplex(struct net_device* dev); ++#else + static void broadcom_check_speed(struct net_device* dev); + static void broadcom_check_duplex(struct net_device* dev); + static void tdk_check_speed(struct net_device* dev); +@@ -444,16 +236,29 @@ + static void intel_check_duplex(struct net_device* dev); + static void generic_check_speed(struct net_device* dev); + static void generic_check_duplex(struct net_device* dev); ++#endif ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void e100_netpoll(struct net_device* dev); ++#endif ++ ++static int autoneg_normal = 1; + + struct transceiver_ops transceivers[] = + { ++#if defined(CONFIG_ETRAX_NO_PHY) ++ {0x0000, dummy_check_speed, dummy_check_duplex} /* Dummy */ ++#else + {0x1018, broadcom_check_speed, broadcom_check_duplex}, /* Broadcom */ + {0xC039, tdk_check_speed, tdk_check_duplex}, /* TDK 2120 */ + {0x039C, tdk_check_speed, tdk_check_duplex}, /* TDK 2120C */ +- {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/ ++ {0x04de, intel_check_speed, intel_check_duplex}, /* Intel LXT972A*/ + {0x0000, generic_check_speed, generic_check_duplex} /* Generic, must be last */ ++#endif + }; + ++struct transceiver_ops* transceiver = &transceivers[0]; ++static unsigned int mdio_phy_addr = 0; /* PHY address on MDIO bus */ ++ + #define tx_done(dev) (*R_DMA_CH0_CMD == 0) + + /* +@@ -468,18 +273,26 @@ + etrax_ethernet_init(void) + { + struct net_device *dev; +- struct net_local* np; ++ struct net_local* np; + int i, err; + + printk(KERN_INFO +- "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 2000-2003 Axis Communications AB\n"); +- ++ "ETRAX 100LX 10/100MBit ethernet v2.0 (c) 1998-2006 Axis Communications AB\n"); ++ ++ if (cris_request_io_interface(if_eth, cardname)) { ++ printk(KERN_CRIT "etrax_ethernet_init failed to get IO interface\n"); ++ return -EBUSY; ++ } ++ + dev = alloc_etherdev(sizeof(struct net_local)); +- np = dev->priv; +- + if (!dev) + return -ENOMEM; ++ ++ np = netdev_priv(dev); + ++ /* we do our own locking */ ++ dev->features |= NETIF_F_LLTX; ++ + dev->base_addr = (unsigned int)R_NETWORK_SA_0; /* just to have something to show */ + + /* now setup our etrax specific stuff */ +@@ -495,18 +308,26 @@ + dev->get_stats = e100_get_stats; + dev->set_multicast_list = set_multicast_list; + dev->set_mac_address = e100_set_mac_address; +- dev->ethtool_ops = &e100_ethtool_ops; ++ dev->ethtool_ops = &e100_ethtool_ops; + dev->do_ioctl = e100_ioctl; +- dev->set_config = e100_set_config; ++ dev->set_config = e100_set_config; + dev->tx_timeout = e100_tx_timeout; ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ dev->poll_controller = e100_netpoll; ++#endif ++ ++ spin_lock_init(&np->lock); ++ spin_lock_init(&np->led_lock); ++ spin_lock_init(&np->transceiver_lock); + + /* Initialise the list of Etrax DMA-descriptors */ + + /* Initialise receive descriptors */ + + for (i = 0; i < NBR_OF_RX_DESC; i++) { +- /* Allocate two extra cachelines to make sure that buffer used by DMA +- * does not share cacheline with any other data (to avoid cache bug) ++ /* Allocate two extra cachelines to make sure that buffer used ++ * by DMA does not share cacheline with any other data (to ++ * avoid cache bug) + */ + RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); + if (!RxDescList[i].skb) +@@ -517,6 +338,7 @@ + RxDescList[i].descr.buf = L1_CACHE_ALIGN(virt_to_phys(RxDescList[i].skb->data)); + RxDescList[i].descr.status = 0; + RxDescList[i].descr.hw_len = 0; ++ + prepare_rx_descriptor(&RxDescList[i].descr); + } + +@@ -542,7 +364,6 @@ + + myNextRxDesc = &RxDescList[0]; + myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; +- myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; + myFirstTxDesc = &TxDescList[0]; + myNextTxDesc = &TxDescList[0]; + myLastTxDesc = &TxDescList[NBR_OF_TX_DESC - 1]; +@@ -563,18 +384,19 @@ + current_speed = 10; + current_speed_selection = 0; /* Auto */ + speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; +- duplex_timer.data = (unsigned long)dev; ++ speed_timer.data = (unsigned long)dev; + speed_timer.function = e100_check_speed; + + clear_led_timer.function = e100_clear_network_leds; ++ clear_led_timer.data = (unsigned long)dev; + + full_duplex = 0; + current_duplex = autoneg; + duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; +- duplex_timer.data = (unsigned long)dev; ++ duplex_timer.data = (unsigned long)dev; + duplex_timer.function = e100_check_duplex; + +- /* Initialize mii interface */ ++ /* Initialize mii interface */ + np->mii_if.phy_id = mdio_phy_addr; + np->mii_if.phy_id_mask = 0x1f; + np->mii_if.reg_num_mask = 0x1f; +@@ -586,6 +408,9 @@ + /* unwanted addresses are matched */ + *R_NETWORK_GA_0 = 0x00000000; + *R_NETWORK_GA_1 = 0x00000000; ++ ++ /* Initialize next time the led can flash */ ++ led_next_time = jiffies; + return 0; + } + +@@ -596,7 +421,7 @@ + static int + e100_set_mac_address(struct net_device *dev, void *p) + { +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); + struct sockaddr *addr = p; + int i; + +@@ -680,17 +505,36 @@ + /* allocate the irq corresponding to the transmitting DMA */ + + if (request_irq(NETWORK_DMA_TX_IRQ_NBR, e100rxtx_interrupt, 0, +- cardname, (void *)dev)) { ++ cardname, (void *)dev)) { + goto grace_exit1; + } + + /* allocate the irq corresponding to the network errors etc */ + + if (request_irq(NETWORK_STATUS_IRQ_NBR, e100nw_interrupt, 0, +- cardname, (void *)dev)) { ++ cardname, (void *)dev)) { + goto grace_exit2; + } + ++ /* ++ * Always allocate the DMA channels after the IRQ, ++ * and clean up on failure. ++ */ ++ ++ if (cris_request_dma(NETWORK_TX_DMA_NBR, ++ cardname, ++ DMA_VERBOSE_ON_ERROR, ++ dma_eth)) { ++ goto grace_exit3; ++ } ++ ++ if (cris_request_dma(NETWORK_RX_DMA_NBR, ++ cardname, ++ DMA_VERBOSE_ON_ERROR, ++ dma_eth)) { ++ goto grace_exit4; ++ } ++ + /* give the HW an idea of what MAC address we want */ + + *R_NETWORK_SA_0 = dev->dev_addr[0] | (dev->dev_addr[1] << 8) | +@@ -705,6 +549,7 @@ + + *R_NETWORK_REC_CONFIG = 0xd; /* broadcast rec, individ. rec, ma0 enabled */ + #else ++ SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, max_size, size1522); + SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, broadcast, receive); + SETS(network_rec_config_shadow, R_NETWORK_REC_CONFIG, ma0, enable); + SETF(network_rec_config_shadow, R_NETWORK_REC_CONFIG, duplex, full_duplex); +@@ -724,8 +569,7 @@ + SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, crc, enable); + *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow; + +- save_flags(flags); +- cli(); ++ local_irq_save(flags); + + /* enable the irq's for ethernet DMA */ + +@@ -757,12 +601,13 @@ + + *R_DMA_CH0_FIRST = 0; + *R_DMA_CH0_DESCR = virt_to_phys(myLastTxDesc); ++ netif_start_queue(dev); + +- restore_flags(flags); ++ local_irq_restore(flags); + + /* Probe for transceiver */ + if (e100_probe_transceiver(dev)) +- goto grace_exit3; ++ goto grace_exit5; + + /* Start duplex/speed timers */ + add_timer(&speed_timer); +@@ -771,10 +616,14 @@ + /* We are now ready to accept transmit requeusts from + * the queueing layer of the networking. + */ +- netif_start_queue(dev); ++ netif_carrier_on(dev); + + return 0; + ++grace_exit5: ++ cris_free_dma(NETWORK_RX_DMA_NBR, cardname); ++grace_exit4: ++ cris_free_dma(NETWORK_TX_DMA_NBR, cardname); + grace_exit3: + free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev); + grace_exit2: +@@ -785,7 +634,13 @@ + return -EAGAIN; + } + +- ++#if defined(CONFIG_ETRAX_NO_PHY) ++static void ++dummy_check_speed(struct net_device* dev) ++{ ++ current_speed = 100; ++} ++#else + static void + generic_check_speed(struct net_device* dev) + { +@@ -821,15 +676,18 @@ + data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2); + current_speed = (data & MDIO_INT_SPEED ? 100 : 10); + } +- ++#endif + static void + e100_check_speed(unsigned long priv) + { + struct net_device* dev = (struct net_device*)priv; ++ struct net_local *np = netdev_priv(dev); + static int led_initiated = 0; + unsigned long data; + int old_speed = current_speed; + ++ spin_lock(&np->transceiver_lock); ++ + data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMSR); + if (!(data & BMSR_LSTATUS)) { + current_speed = 0; +@@ -837,14 +695,22 @@ + transceiver->check_speed(dev); + } + ++ spin_lock(&np->led_lock); + if ((old_speed != current_speed) || !led_initiated) { + led_initiated = 1; + e100_set_network_leds(NO_NETWORK_ACTIVITY); ++ if (current_speed) ++ netif_carrier_on(dev); ++ else ++ netif_carrier_off(dev); + } ++ spin_unlock(&np->led_lock); + + /* Reinitialize the timer. */ + speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; + add_timer(&speed_timer); ++ ++ spin_unlock(&np->transceiver_lock); + } + + static void +@@ -857,7 +723,7 @@ + ADVERTISE_10HALF | ADVERTISE_10FULL); + + switch (current_speed_selection) { +- case 10 : ++ case 10: + if (current_duplex == full) + data |= ADVERTISE_10FULL; + else if (current_duplex == half) +@@ -866,7 +732,7 @@ + data |= ADVERTISE_10HALF | ADVERTISE_10FULL; + break; + +- case 100 : ++ case 100: + if (current_duplex == full) + data |= ADVERTISE_100FULL; + else if (current_duplex == half) +@@ -875,45 +741,54 @@ + data |= ADVERTISE_100HALF | ADVERTISE_100FULL; + break; + +- case 0 : /* Auto */ ++ case 0: /* Auto */ + if (current_duplex == full) + data |= ADVERTISE_100FULL | ADVERTISE_10FULL; + else if (current_duplex == half) + data |= ADVERTISE_100HALF | ADVERTISE_10HALF; + else + data |= ADVERTISE_10HALF | ADVERTISE_10FULL | +- ADVERTISE_100HALF | ADVERTISE_100FULL; ++ ADVERTISE_100HALF | ADVERTISE_100FULL; + break; + +- default : /* assume autoneg speed and duplex */ ++ default: /* assume autoneg speed and duplex */ + data |= ADVERTISE_10HALF | ADVERTISE_10FULL | +- ADVERTISE_100HALF | ADVERTISE_100FULL; ++ ADVERTISE_100HALF | ADVERTISE_100FULL; ++ break; + } + + e100_set_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE, data); + + /* Renegotiate with link partner */ +- data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR); +- data |= BMCR_ANENABLE | BMCR_ANRESTART; +- ++ if (autoneg_normal) { ++ data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_BMCR); ++ data |= BMCR_ANENABLE | BMCR_ANRESTART; ++ } + e100_set_mdio_reg(dev, mdio_phy_addr, MII_BMCR, data); + } + + static void + e100_set_speed(struct net_device* dev, unsigned long speed) + { ++ struct net_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->transceiver_lock); + if (speed != current_speed_selection) { + current_speed_selection = speed; + e100_negotiate(dev); + } ++ spin_unlock(&np->transceiver_lock); + } + + static void + e100_check_duplex(unsigned long priv) + { + struct net_device *dev = (struct net_device *)priv; +- struct net_local *np = (struct net_local *)dev->priv; +- int old_duplex = full_duplex; ++ struct net_local *np = netdev_priv(dev); ++ int old_duplex; ++ ++ spin_lock(&np->transceiver_lock); ++ old_duplex = full_duplex; + transceiver->check_duplex(dev); + if (old_duplex != full_duplex) { + /* Duplex changed */ +@@ -925,12 +800,20 @@ + duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; + add_timer(&duplex_timer); + np->mii_if.full_duplex = full_duplex; ++ spin_unlock(&np->transceiver_lock); + } +- ++#if defined(CONFIG_ETRAX_NO_PHY) ++static void ++dummy_check_duplex(struct net_device* dev) ++{ ++ full_duplex = 1; ++} ++#else + static void + generic_check_duplex(struct net_device* dev) + { + unsigned long data; ++ + data = e100_get_mdio_reg(dev, mdio_phy_addr, MII_ADVERTISE); + if ((data & ADVERTISE_10FULL) || + (data & ADVERTISE_100FULL)) +@@ -943,6 +826,7 @@ + tdk_check_duplex(struct net_device* dev) + { + unsigned long data; ++ + data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_TDK_DIAGNOSTIC_REG); + full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0; + } +@@ -951,6 +835,7 @@ + broadcom_check_duplex(struct net_device* dev) + { + unsigned long data; ++ + data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_AUX_CTRL_STATUS_REG); + full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0; + } +@@ -959,26 +844,35 @@ + intel_check_duplex(struct net_device* dev) + { + unsigned long data; ++ + data = e100_get_mdio_reg(dev, mdio_phy_addr, MDIO_INT_STATUS_REG_2); + full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0; + } +- ++#endif + static void + e100_set_duplex(struct net_device* dev, enum duplex new_duplex) + { ++ struct net_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->transceiver_lock); + if (new_duplex != current_duplex) { + current_duplex = new_duplex; + e100_negotiate(dev); + } ++ spin_unlock(&np->transceiver_lock); + } + + static int + e100_probe_transceiver(struct net_device* dev) + { ++#if !defined(CONFIG_ETRAX_NO_PHY) + unsigned int phyid_high; + unsigned int phyid_low; + unsigned int oui; + struct transceiver_ops* ops = NULL; ++ struct net_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->transceiver_lock); + + /* Probe MDIO physical address */ + for (mdio_phy_addr = 0; mdio_phy_addr <= 31; mdio_phy_addr++) { +@@ -986,7 +880,7 @@ + break; + } + if (mdio_phy_addr == 32) +- return -ENODEV; ++ return -ENODEV; + + /* Get manufacturer */ + phyid_high = e100_get_mdio_reg(dev, mdio_phy_addr, MII_PHYSID1); +@@ -999,6 +893,8 @@ + } + transceiver = ops; + ++ spin_unlock(&np->transceiver_lock); ++#endif + return 0; + } + +@@ -1006,7 +902,7 @@ + e100_get_mdio_reg(struct net_device *dev, int phy_id, int location) + { + unsigned short cmd; /* Data to be sent on MDIO port */ +- int data; /* Data read from MDIO */ ++ int data; /* Data read from MDIO */ + int bitCounter; + + /* Start of frame, OP Code, Physical Address, Register Address */ +@@ -1082,6 +978,7 @@ + e100_receive_mdio_bit() + { + unsigned char bit; ++ + *R_NETWORK_MGM_CTRL = 0; + bit = IO_EXTRACT(R_NETWORK_STAT, mdio, *R_NETWORK_STAT); + udelay(1); +@@ -1117,7 +1014,7 @@ + static void + e100_tx_timeout(struct net_device *dev) + { +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&np->lock, flags); +@@ -1139,8 +1036,7 @@ + e100_reset_transceiver(dev); + + /* and get rid of the packets that never got an interrupt */ +- while (myFirstTxDesc != myNextTxDesc) +- { ++ while (myFirstTxDesc != myNextTxDesc) { + dev_kfree_skb(myFirstTxDesc->skb); + myFirstTxDesc->skb = 0; + myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next); +@@ -1166,7 +1062,7 @@ + static int + e100_send_packet(struct sk_buff *skb, struct net_device *dev) + { +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); + unsigned char *buf = skb->data; + unsigned long flags; + +@@ -1179,7 +1075,7 @@ + + dev->trans_start = jiffies; + +- e100_hardware_send_packet(buf, skb->len); ++ e100_hardware_send_packet(np, buf, skb->len); + + myNextTxDesc = phys_to_virt(myNextTxDesc->descr.next); + +@@ -1202,13 +1098,15 @@ + e100rxtx_interrupt(int irq, void *dev_id) + { + struct net_device *dev = (struct net_device *)dev_id; +- struct net_local *np = (struct net_local *)dev->priv; +- unsigned long irqbits = *R_IRQ_MASK2_RD; ++ struct net_local *np = netdev_priv(dev); ++ unsigned long irqbits; + +- /* Disable RX/TX IRQs to avoid reentrancy */ +- *R_IRQ_MASK2_CLR = +- IO_STATE(R_IRQ_MASK2_CLR, dma0_eop, clr) | +- IO_STATE(R_IRQ_MASK2_CLR, dma1_eop, clr); ++ /* ++ * Note that both rx and tx interrupts are blocked at this point, ++ * regardless of which got us here. ++ */ ++ ++ irqbits = *R_IRQ_MASK2_RD; + + /* Handle received packets */ + if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma1_eop, active)) { +@@ -1224,7 +1122,7 @@ + * allocate a new buffer to put a packet in. + */ + e100_rx(dev); +- ((struct net_local *)dev->priv)->stats.rx_packets++; ++ np->stats.rx_packets++; + /* restart/continue on the channel, for safety */ + *R_DMA_CH1_CMD = IO_STATE(R_DMA_CH1_CMD, cmd, restart); + /* clear dma channel 1 eop/descr irq bits */ +@@ -1239,8 +1137,7 @@ + + /* Report any packets that have been sent */ + while (myFirstTxDesc != phys_to_virt(*R_DMA_CH0_FIRST) && +- myFirstTxDesc != myNextTxDesc) +- { ++ (netif_queue_stopped(dev) || myFirstTxDesc != myNextTxDesc)) { + np->stats.tx_bytes += myFirstTxDesc->skb->len; + np->stats.tx_packets++; + +@@ -1249,19 +1146,15 @@ + dev_kfree_skb_irq(myFirstTxDesc->skb); + myFirstTxDesc->skb = 0; + myFirstTxDesc = phys_to_virt(myFirstTxDesc->descr.next); ++ /* Wake up queue. */ ++ netif_wake_queue(dev); + } + + if (irqbits & IO_STATE(R_IRQ_MASK2_RD, dma0_eop, active)) { +- /* acknowledge the eop interrupt and wake up queue */ ++ /* acknowledge the eop interrupt. */ + *R_DMA_CH0_CLR_INTR = IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do); +- netif_wake_queue(dev); + } + +- /* Enable RX/TX IRQs again */ +- *R_IRQ_MASK2_SET = +- IO_STATE(R_IRQ_MASK2_SET, dma0_eop, set) | +- IO_STATE(R_IRQ_MASK2_SET, dma1_eop, set); +- + return IRQ_HANDLED; + } + +@@ -1269,7 +1162,7 @@ + e100nw_interrupt(int irq, void *dev_id) + { + struct net_device *dev = (struct net_device *)dev_id; +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); + unsigned long irqbits = *R_IRQ_MASK0_RD; + + /* check for underrun irq */ +@@ -1291,7 +1184,6 @@ + SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, clr); + *R_NETWORK_TR_CTRL = network_tr_ctrl_shadow; + SETS(network_tr_ctrl_shadow, R_NETWORK_TR_CTRL, clr_error, nop); +- *R_NETWORK_TR_CTRL = IO_STATE(R_NETWORK_TR_CTRL, clr_error, clr); + np->stats.tx_errors++; + D(printk("ethernet excessive collisions!\n")); + } +@@ -1304,12 +1196,13 @@ + { + struct sk_buff *skb; + int length = 0; +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); + unsigned char *skb_data_ptr; + #ifdef ETHDEBUG + int i; + #endif +- ++ etrax_eth_descr *prevRxDesc; /* The descriptor right before myNextRxDesc */ ++ spin_lock(&np->led_lock); + if (!led_active && time_after(jiffies, led_next_time)) { + /* light the network leds depending on the current speed. */ + e100_set_network_leds(NETWORK_ACTIVITY); +@@ -1319,9 +1212,10 @@ + led_active = 1; + mod_timer(&clear_led_timer, jiffies + HZ/10); + } ++ spin_unlock(&np->led_lock); + + length = myNextRxDesc->descr.hw_len - 4; +- ((struct net_local *)dev->priv)->stats.rx_bytes += length; ++ np->stats.rx_bytes += length; + + #ifdef ETHDEBUG + printk("Got a packet of length %d:\n", length); +@@ -1341,7 +1235,7 @@ + if (!skb) { + np->stats.rx_errors++; + printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); +- return; ++ goto update_nextrxdesc; + } + + skb_put(skb, length - ETHER_HEAD_LEN); /* allocate room for the packet body */ +@@ -1358,15 +1252,15 @@ + else { + /* Large packet, send directly to upper layers and allocate new + * memory (aligned to cache line boundary to avoid bug). +- * Before sending the skb to upper layers we must make sure that +- * skb->data points to the aligned start of the packet. ++ * Before sending the skb to upper layers we must make sure ++ * that skb->data points to the aligned start of the packet. + */ + int align; + struct sk_buff *new_skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); + if (!new_skb) { + np->stats.rx_errors++; + printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); +- return; ++ goto update_nextrxdesc; + } + skb = myNextRxDesc->skb; + align = (int)phys_to_virt(myNextRxDesc->descr.buf) - (int)skb->data; +@@ -1382,9 +1276,10 @@ + /* Send the packet to the upper layers */ + netif_rx(skb); + ++ update_nextrxdesc: + /* Prepare for next packet */ + myNextRxDesc->descr.status = 0; +- myPrevRxDesc = myNextRxDesc; ++ prevRxDesc = myNextRxDesc; + myNextRxDesc = phys_to_virt(myNextRxDesc->descr.next); + + rx_queue_len++; +@@ -1392,9 +1287,9 @@ + /* Check if descriptors should be returned */ + if (rx_queue_len == RX_QUEUE_THRESHOLD) { + flush_etrax_cache(); +- myPrevRxDesc->descr.ctrl |= d_eol; ++ prevRxDesc->descr.ctrl |= d_eol; + myLastRxDesc->descr.ctrl &= ~d_eol; +- myLastRxDesc = myPrevRxDesc; ++ myLastRxDesc = prevRxDesc; + rx_queue_len = 0; + } + } +@@ -1403,7 +1298,7 @@ + static int + e100_close(struct net_device *dev) + { +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); + + printk(KERN_INFO "Closing %s.\n", dev->name); + +@@ -1431,6 +1326,9 @@ + free_irq(NETWORK_DMA_TX_IRQ_NBR, (void *)dev); + free_irq(NETWORK_STATUS_IRQ_NBR, (void *)dev); + ++ cris_free_dma(NETWORK_TX_DMA_NBR, cardname); ++ cris_free_dma(NETWORK_RX_DMA_NBR, cardname); ++ + /* Update the statistics here. */ + + update_rx_stats(&np->stats); +@@ -1448,46 +1346,56 @@ + { + struct mii_ioctl_data *data = if_mii(ifr); + struct net_local *np = netdev_priv(dev); ++ int ret = 0; ++ int old_autoneg; + + spin_lock(&np->lock); /* Preempt protection */ + switch (cmd) { +- case SIOCGMIIPHY: /* Get PHY address */ ++ case SIOCGMIIPHY: /* Get PHY address */ + data->phy_id = mdio_phy_addr; + break; +- case SIOCGMIIREG: /* Read MII register */ ++ case SIOCGMIIREG: /* Read MII register */ + data->val_out = e100_get_mdio_reg(dev, mdio_phy_addr, data->reg_num); + break; +- case SIOCSMIIREG: /* Write MII register */ ++ case SIOCSMIIREG: /* Write MII register */ + e100_set_mdio_reg(dev, mdio_phy_addr, data->reg_num, data->val_in); + break; ++ + /* The ioctls below should be considered obsolete but are */ + /* still present for compatability with old scripts/apps */ +- case SET_ETH_SPEED_10: /* 10 Mbps */ ++ case SET_ETH_SPEED_10: /* 10 Mbps */ + e100_set_speed(dev, 10); + break; +- case SET_ETH_SPEED_100: /* 100 Mbps */ ++ case SET_ETH_SPEED_100: /* 100 Mbps */ + e100_set_speed(dev, 100); + break; +- case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */ ++ case SET_ETH_SPEED_AUTO: /* Auto-negotiate speed */ + e100_set_speed(dev, 0); + break; +- case SET_ETH_DUPLEX_HALF: /* Half duplex. */ ++ case SET_ETH_DUPLEX_HALF: /* Half duplex */ + e100_set_duplex(dev, half); + break; +- case SET_ETH_DUPLEX_FULL: /* Full duplex. */ ++ case SET_ETH_DUPLEX_FULL: /* Full duplex */ + e100_set_duplex(dev, full); + break; +- case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex*/ ++ case SET_ETH_DUPLEX_AUTO: /* Auto-negotiate duplex */ + e100_set_duplex(dev, autoneg); + break; ++ case SET_ETH_AUTONEG: ++ old_autoneg = autoneg_normal; ++ autoneg_normal = *(int*)data; ++ if (autoneg_normal != old_autoneg) ++ e100_negotiate(dev); ++ break; + default: ++ spin_unlock(&np->lock); + return -EINVAL; + } + spin_unlock(&np->lock); +- return 0; ++ return ret; + } + +-static int e100_set_settings(struct net_device *dev, ++static int e100_get_settings(struct net_device *dev, + struct ethtool_cmd *ecmd) + { + ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | +@@ -1565,7 +1473,8 @@ + static int + e100_set_config(struct net_device *dev, struct ifmap *map) + { +- struct net_local *np = (struct net_local *)dev->priv; ++ struct net_local *np = netdev_priv(dev); ++ + spin_lock(&np->lock); /* Preempt protection */ + + switch(map->port) { +@@ -1574,21 +1483,25 @@ + e100_set_speed(dev, 0); + e100_set_duplex(dev, autoneg); + break; ++ + case IF_PORT_10BASET: + e100_set_speed(dev, 10); + e100_set_duplex(dev, autoneg); + break; ++ + case IF_PORT_100BASET: + case IF_PORT_100BASETX: + e100_set_speed(dev, 100); + e100_set_duplex(dev, autoneg); + break; ++ + case IF_PORT_100BASEFX: + case IF_PORT_10BASE2: + case IF_PORT_AUI: + spin_unlock(&np->lock); + return -EOPNOTSUPP; + break; ++ + default: + printk(KERN_ERR "%s: Invalid media selected", dev->name); + spin_unlock(&np->lock); +@@ -1602,6 +1515,7 @@ + update_rx_stats(struct net_device_stats *es) + { + unsigned long r = *R_REC_COUNTERS; ++ + /* update stats relevant to reception errors */ + es->rx_fifo_errors += IO_EXTRACT(R_REC_COUNTERS, congestion, r); + es->rx_crc_errors += IO_EXTRACT(R_REC_COUNTERS, crc_error, r); +@@ -1613,11 +1527,11 @@ + update_tx_stats(struct net_device_stats *es) + { + unsigned long r = *R_TR_COUNTERS; ++ + /* update stats relevant to transmission errors */ + es->collisions += + IO_EXTRACT(R_TR_COUNTERS, single_col, r) + + IO_EXTRACT(R_TR_COUNTERS, multiple_col, r); +- es->tx_errors += IO_EXTRACT(R_TR_COUNTERS, deferred, r); + } + + /* +@@ -1627,8 +1541,9 @@ + static struct net_device_stats * + e100_get_stats(struct net_device *dev) + { +- struct net_local *lp = (struct net_local *)dev->priv; ++ struct net_local *lp = netdev_priv(dev); + unsigned long flags; ++ + spin_lock_irqsave(&lp->lock, flags); + + update_rx_stats(&lp->stats); +@@ -1640,21 +1555,21 @@ + + /* + * Set or clear the multicast filter for this adaptor. +- * num_addrs == -1 Promiscuous mode, receive all packets +- * num_addrs == 0 Normal mode, clear multicast list +- * num_addrs > 0 Multicast mode, receive normal and MC packets, +- * and do best-effort filtering. ++ * num_addrs == -1 Promiscuous mode, receive all packets ++ * num_addrs == 0 Normal mode, clear multicast list ++ * num_addrs > 0 Multicast mode, receive normal and MC packets, ++ * and do best-effort filtering. + */ + static void + set_multicast_list(struct net_device *dev) + { +- struct net_local *lp = (struct net_local *)dev->priv; ++ struct net_local *lp = netdev_priv(dev); + int num_addr = dev->mc_count; + unsigned long int lo_bits; + unsigned long int hi_bits; ++ + spin_lock(&lp->lock); +- if (dev->flags & IFF_PROMISC) +- { ++ if (dev->flags & IFF_PROMISC) { + /* promiscuous mode */ + lo_bits = 0xfffffffful; + hi_bits = 0xfffffffful; +@@ -1684,9 +1599,10 @@ + struct dev_mc_list *dmi = dev->mc_list; + int i; + char *baddr; ++ + lo_bits = 0x00000000ul; + hi_bits = 0x00000000ul; +- for (i=0; i<num_addr; i++) { ++ for (i = 0; i < num_addr; i++) { + /* Calculate the hash index for the GA registers */ + + hash_ix = 0; +@@ -1713,8 +1629,7 @@ + + if (hash_ix >= 32) { + hi_bits |= (1 << (hash_ix-32)); +- } +- else { ++ } else { + lo_bits |= (1 << hash_ix); + } + dmi = dmi->next; +@@ -1729,10 +1644,11 @@ + } + + void +-e100_hardware_send_packet(char *buf, int length) ++e100_hardware_send_packet(struct net_local *np, char *buf, int length) + { + D(printk("e100 send pack, buf 0x%x len %d\n", buf, length)); + ++ spin_lock(&np->led_lock); + if (!led_active && time_after(jiffies, led_next_time)) { + /* light the network leds depending on the current speed. */ + e100_set_network_leds(NETWORK_ACTIVITY); +@@ -1742,15 +1658,16 @@ + led_active = 1; + mod_timer(&clear_led_timer, jiffies + HZ/10); + } ++ spin_unlock(&np->led_lock); + + /* configure the tx dma descriptor */ + myNextTxDesc->descr.sw_len = length; + myNextTxDesc->descr.ctrl = d_eop | d_eol | d_wait; + myNextTxDesc->descr.buf = virt_to_phys(buf); + +- /* Move end of list */ +- myLastTxDesc->descr.ctrl &= ~d_eol; +- myLastTxDesc = myNextTxDesc; ++ /* Move end of list */ ++ myLastTxDesc->descr.ctrl &= ~d_eol; ++ myLastTxDesc = myNextTxDesc; + + /* Restart DMA channel */ + *R_DMA_CH0_CMD = IO_STATE(R_DMA_CH0_CMD, cmd, restart); +@@ -1759,6 +1676,11 @@ + static void + e100_clear_network_leds(unsigned long dummy) + { ++ struct net_device *dev = (struct net_device *)dummy; ++ struct net_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->led_lock); ++ + if (led_active && time_after(jiffies, led_next_time)) { + e100_set_network_leds(NO_NETWORK_ACTIVITY); + +@@ -1766,6 +1688,8 @@ + led_next_time = jiffies + NET_FLASH_PAUSE; + led_active = 0; + } ++ ++ spin_unlock(&np->led_lock); + } + + static void +@@ -1786,19 +1710,25 @@ + #else + LED_NETWORK_SET(LED_OFF); + #endif +- } +- else if (light_leds) { ++ } else if (light_leds) { + if (current_speed == 10) { + LED_NETWORK_SET(LED_ORANGE); + } else { + LED_NETWORK_SET(LED_GREEN); + } +- } +- else { ++ } else { + LED_NETWORK_SET(LED_OFF); + } + } + ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void ++e100_netpoll(struct net_device* netdev) ++{ ++ e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL); ++} ++#endif ++ + static int + etrax_init_module(void) + { +diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c +--- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.c 2007-02-06 11:10:37.000000000 +0100 +@@ -0,0 +1,2305 @@ ++/* ++ * Driver for the ETRAX FS network controller. ++ * ++ * Copyright (c) 2003-2006 Axis Communications AB. ++ */ ++ ++#include <linux/module.h> ++ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/delay.h> ++#include <linux/types.h> ++#include <linux/fcntl.h> ++#include <linux/interrupt.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/in.h> ++#include <linux/slab.h> ++#include <linux/string.h> ++#include <linux/spinlock.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/cpufreq.h> ++ ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++#include <linux/ethtool.h> ++#include <linux/mii.h> ++ ++#include <asm/io.h> /* LED_* I/O functions */ ++#include <asm/irq.h> ++#include <asm/arch/hwregs/reg_map.h> ++#include <asm/arch/hwregs/reg_rdwr.h> ++#include <asm/arch/hwregs/dma.h> ++#include <asm/arch/hwregs/eth_defs.h> ++#include <asm/arch/hwregs/config_defs.h> ++#include <asm/arch/hwregs/intr_vect_defs.h> ++#include <asm/system.h> ++#include <asm/bitops.h> ++#include <asm/ethernet.h> ++#include <asm/arch/dma.h> ++#include <asm/arch/intmem.h> ++#include <asm/arch/pinmux.h> ++ ++#include "eth_v32.h" ++ ++#define DEBUG(x) ++#define GET_BIT(bit,val) (((val) >> (bit)) & 0x01) ++ ++/* Toggle network LEDs on/off at runtime */ ++static int use_network_leds = 1; ++ ++static void update_rx_stats(struct crisv32_ethernet_local *np); ++static void update_tx_stats(struct crisv32_ethernet_local *np); ++static void crisv32_eth_setup_controller(struct net_device *dev); ++static int crisv32_eth_request_irqdma(struct net_device *dev); ++static void crisv32_eth_init_rings(struct net_device *dev); ++static void crisv32_eth_reset_rings(struct net_device *dev); ++static void crisv32_ethernet_bug(struct net_device *dev); ++ ++/* ++ * The name of the card. Is used for messages and in the requests for ++ * io regions, irqs and dma channels. ++ */ ++static const char *cardname = "ETRAX FS built-in ethernet controller"; ++ ++static int autoneg_normal = 1; ++ ++/* Some chipset needs special care. */ ++struct transceiver_ops transceivers[] = { ++ {0x1018, broadcom_check_speed, broadcom_check_duplex}, ++ /* TDK 2120 and TDK 2120C */ ++ {0xC039, tdk_check_speed, tdk_check_duplex}, ++ {0x039C, tdk_check_speed, tdk_check_duplex}, ++ /* Intel LXT972A*/ ++ {0x04de, intel_check_speed, intel_check_duplex}, ++ /* National Semiconductor DP83865 */ ++ {0x0017, national_check_speed, national_check_duplex}, ++ /* Generic, must be last. */ ++ {0x0000, generic_check_speed, generic_check_duplex} ++}; ++ ++static struct net_device *crisv32_dev[2]; ++static struct crisv32_eth_leds *crisv32_leds[3]; ++ ++#ifdef CONFIG_CPU_FREQ ++static int ++crisv32_ethernet_freq_notifier(struct notifier_block *nb, unsigned long val, ++ void *data); ++ ++static struct notifier_block crisv32_ethernet_freq_notifier_block = { ++ .notifier_call = crisv32_ethernet_freq_notifier ++}; ++#endif ++ ++/* ++ * mask in and out tx/rx interrupts. ++ */ ++static inline void crisv32_disable_tx_ints(struct crisv32_ethernet_local *np) ++{ ++ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_no }; ++ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx); ++} ++ ++static inline void crisv32_enable_tx_ints(struct crisv32_ethernet_local *np) ++{ ++ reg_dma_rw_intr_mask intr_mask_tx = { .data = regk_dma_yes }; ++ REG_WR(dma, np->dma_out_inst, rw_intr_mask, intr_mask_tx); ++} ++ ++static inline void crisv32_disable_rx_ints(struct crisv32_ethernet_local *np) ++{ ++ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_no }; ++ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx); ++} ++ ++static inline void crisv32_enable_rx_ints(struct crisv32_ethernet_local *np) ++{ ++ reg_dma_rw_intr_mask intr_mask_rx = { .in_eop = regk_dma_yes }; ++ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_rx); ++} ++ ++/* start/stop receiver */ ++static inline void crisv32_start_receiver(struct crisv32_ethernet_local *np) ++{ ++ reg_eth_rw_rec_ctrl rec_ctrl; ++ ++ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); ++ rec_ctrl.ma0 = regk_eth_yes; ++ rec_ctrl.broadcast = regk_eth_rec; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++} ++ ++static inline void crisv32_stop_receiver(struct crisv32_ethernet_local *np) ++{ ++ reg_eth_rw_rec_ctrl rec_ctrl; ++ ++ rec_ctrl = REG_RD(eth, np->eth_inst, rw_rec_ctrl); ++ rec_ctrl.ma0 = regk_eth_no; ++ rec_ctrl.broadcast = regk_eth_discard; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++} ++ ++static int __init ++crisv32_eth_request_irqdma(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ /* Allocate IRQs and DMAs. */ ++ if (np->eth_inst == regi_eth0) { ++ if (request_irq(DMA0_INTR_VECT, crisv32tx_eth_interrupt, ++ 0, cardname, dev)) { ++ return -EAGAIN; ++ } ++ ++ if (request_irq(DMA1_INTR_VECT, crisv32rx_eth_interrupt, ++ IRQF_SAMPLE_RANDOM, cardname, dev)) { ++ goto err0_1; ++ } ++ ++ if (crisv32_request_dma(0, cardname, DMA_VERBOSE_ON_ERROR, ++ 12500000, dma_eth0)) ++ goto err0_2; ++ ++ if (crisv32_request_dma(1, cardname, DMA_VERBOSE_ON_ERROR, ++ 12500000, dma_eth0)) ++ goto err0_3; ++ ++ if (request_irq(ETH0_INTR_VECT, crisv32nw_eth_interrupt, 0, ++ cardname, dev)) { ++ crisv32_free_dma(1); ++ err0_3: ++ crisv32_free_dma(0); ++ err0_2: ++ free_irq(DMA1_INTR_VECT, dev); ++ err0_1: ++ free_irq(DMA0_INTR_VECT, dev); ++ return -EAGAIN; ++ } ++ } else { ++ if (request_irq(DMA6_INTR_VECT, crisv32tx_eth_interrupt, ++ 0, cardname, dev)) ++ return -EAGAIN; ++ ++ if (request_irq(DMA7_INTR_VECT, crisv32rx_eth_interrupt, ++ IRQF_SAMPLE_RANDOM, cardname, dev)) ++ goto err1_1; ++ ++ if (crisv32_request_dma(6, cardname, DMA_VERBOSE_ON_ERROR, ++ 0, dma_eth1)) ++ goto err1_2; ++ ++ if (crisv32_request_dma(7, cardname, DMA_VERBOSE_ON_ERROR, ++ 0, dma_eth1)) ++ goto err1_3; ++ ++ if (request_irq(ETH1_INTR_VECT, crisv32nw_eth_interrupt, 0, ++ cardname, dev)) { ++ crisv32_free_dma(7); ++ err1_3: ++ crisv32_free_dma(6); ++ err1_2: ++ free_irq(DMA7_INTR_VECT, dev); ++ err1_1: ++ free_irq(DMA6_INTR_VECT, dev); ++ return -EAGAIN; ++ } ++ } ++ return 0; ++} ++ ++static void __init ++crisv32_eth_setup_controller(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ reg_config_rw_pad_ctrl pad_ctrl; ++ ++ reg_eth_rw_tr_ctrl tr_ctrl = { ++ .retry = regk_eth_yes, ++ .pad = regk_eth_yes, ++ .crc = regk_eth_yes ++ }; ++ ++ reg_eth_rw_rec_ctrl rec_ctrl = { ++ .ma0 = regk_eth_no, /* enable at open() */ ++ .broadcast = regk_eth_no, ++ .max_size = regk_eth_size1522 ++ }; ++ ++ reg_eth_rw_ga_lo ga_lo = { 0 }; ++ reg_eth_rw_ga_hi ga_hi = { 0 }; ++ ++ reg_eth_rw_gen_ctrl gen_ctrl = { ++ .phy = regk_eth_mii_clk, ++ .flow_ctrl = regk_eth_yes ++ }; ++ ++ /* ++ * Initialize group address registers to make sure that no ++ * unwanted addresses are matched. ++ */ ++ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo); ++ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi); ++ ++ /* Configure receiver and transmitter */ ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); ++ ++ /* Enable ethernet controller with mii clk. */ ++ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); ++ gen_ctrl.en = regk_eth_yes; ++ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); ++ ++ /* keep reset low (RESET_LEN) */ ++ udelay(500); ++ ++ /* done */ ++ pad_ctrl = REG_RD(config, regi_config, rw_pad_ctrl); ++ pad_ctrl.phyrst_n = 1; ++ REG_WR(config, regi_config, rw_pad_ctrl, pad_ctrl); ++ ++ /* Let the PHY reset (RESET_WAIT) */ ++ udelay(200); ++ ++ crisv32_eth_probe_transceiver(dev); ++} ++ ++static void __init ++crisv32_eth_init_rings(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ int i; ++ ++ /* Initialise receive descriptors for interface. */ ++ for (i = 0; i < NBR_RX_DESC; i++) { ++ struct sk_buff *skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); ++ ++ np->dma_rx_descr_list[i].skb = skb; ++ np->dma_rx_descr_list[i].descr.buf = ++ (char*)virt_to_phys(skb->data); ++ np->dma_rx_descr_list[i].descr.after = ++ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE); ++ ++ np->dma_rx_descr_list[i].descr.eol = 0; ++ np->dma_rx_descr_list[i].descr.in_eop = 0; ++ np->dma_rx_descr_list[i].descr.next = ++ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr); ++ } ++ /* bend the list into a ring */ ++ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next = ++ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr); ++ ++ /* Initialize transmit descriptors. */ ++ for (i = 0; i < NBR_TX_DESC; i++) { ++ np->dma_tx_descr_list[i].descr.wait = 1; ++ np->dma_tx_descr_list[i].descr.eol = 0; ++ np->dma_tx_descr_list[i].descr.out_eop = 0; ++ np->dma_tx_descr_list[i].descr.next = ++ (void*)virt_to_phys(&np->dma_tx_descr_list[i+1].descr); ++ } ++ /* bend the list into a ring */ ++ np->dma_tx_descr_list[NBR_TX_DESC - 1].descr.next = ++ (void *) virt_to_phys(&np->dma_tx_descr_list[0].descr); ++ ++ crisv32_eth_reset_rings(dev); ++} ++ ++static void ++crisv32_eth_reset_rings(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ int i; ++ ++ /* free un-handled tx packets */ ++ while(np->txpackets ++ || np->catch_tx_desc != np->active_tx_desc) { ++ np->txpackets--; ++ if (np->catch_tx_desc->skb) ++ dev_kfree_skb(np->catch_tx_desc->skb); ++ ++ np->catch_tx_desc->skb = 0; ++ np->catch_tx_desc = ++ phys_to_virt((int)np->catch_tx_desc->descr.next); ++ } while (np->catch_tx_desc != np->active_tx_desc); ++ WARN_ON(np->txpackets != 0); ++ np->txpackets = 0; ++ ++ /* cleanup the rx-ring */ ++ for (i = 0; i < NBR_RX_DESC; i++) { ++ struct sk_buff *skb; ++ skb = np->dma_rx_descr_list[i].skb; ++ if (!skb ++ || (np->dma_rx_descr_list[i].descr.buf != ++ (void *)virt_to_phys(skb->data))) ++ { ++ printk("%s:%d: damaged rx-ring! " ++ "i=%d skb=%p %lx %lx %p %p\n", ++ __func__, __LINE__, i, ++ skb, ++ virt_to_phys(skb->data), ++ virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE), ++ np->dma_rx_descr_list[i].descr.buf, ++ np->dma_rx_descr_list[i].descr.after); ++ WARN_ON(1); ++ crisv32_ethernet_bug(dev); ++ if (skb) ++ dev_kfree_skb(skb); ++ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); ++ np->dma_rx_descr_list[i].skb = skb; ++ np->dma_rx_descr_list[i].descr.buf = ++ (char*)virt_to_phys(skb->data); ++ } ++ np->dma_rx_descr_list[i].descr.after = ++ (char*)virt_to_phys(skb->data ++ + MAX_MEDIA_DATA_SIZE); ++ np->dma_rx_descr_list[i].descr.eol = 0; ++ np->dma_rx_descr_list[i].descr.in_eop = 0; ++ /* Workaround cache bug */ ++ flush_dma_descr(&np->dma_rx_descr_list[i].descr, 1); ++ } ++ ++ /* reset rx-ring */ ++ np->active_rx_desc = &np->dma_rx_descr_list[0]; ++ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1]; ++ np->last_rx_desc = np->prev_rx_desc; ++ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1; ++ ++ /* reset tx-ring */ ++ np->dma_tx_descr_list[0].descr.buf = ++ np->dma_tx_descr_list[0].descr.after = 0; ++ np->dma_rx_descr_list[i].descr.in_eop = 0; ++ np->dma_tx_descr_list[0].descr.eol = 1; ++ ++ np->active_tx_desc = &np->dma_tx_descr_list[0]; ++ np->prev_tx_desc = &np->dma_tx_descr_list[NBR_TX_DESC - 1]; ++ np->catch_tx_desc = &np->dma_tx_descr_list[0]; ++ ++ /* Fill context descriptors. */ ++ np->ctxt_in.next = 0; ++ np->ctxt_in.saved_data = ++ (void *)virt_to_phys(&np->active_rx_desc->descr); ++ np->ctxt_in.saved_data_buf = np->active_rx_desc->descr.buf; ++ ++ np->ctxt_out.next = 0; ++ np->ctxt_out.saved_data = ++ (void *)virt_to_phys(&np->dma_tx_descr_list[0].descr); ++} ++ ++static void __init ++crisv32_init_leds(int ledgrp, struct net_device* dev) ++{ ++ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ /* Use already allocated led grp if initialized */ ++ if (crisv32_leds[ledgrp] != NULL) { ++ np->leds = crisv32_leds[ledgrp]; ++ return; ++ } ++ ++ crisv32_leds[ledgrp] = kmalloc(sizeof(struct crisv32_eth_leds),GFP_KERNEL); ++ ++ crisv32_leds[ledgrp]->ledgrp = ledgrp; ++ crisv32_leds[ledgrp]->led_active = 0; ++ /* NOTE: Should this value be set to zero as the jiffies timer can wrap? */ ++ crisv32_leds[ledgrp]->led_next_time = jiffies; ++ ++ crisv32_leds[ledgrp]->clear_led_timer = timer_init; ++ crisv32_leds[ledgrp]->clear_led_timer.function = crisv32_clear_network_leds; ++ crisv32_leds[ledgrp]->clear_led_timer.data = (unsigned long) dev; ++ ++ spin_lock_init(&crisv32_leds[ledgrp]->led_lock); ++ ++ np->leds = crisv32_leds[ledgrp]; ++} ++ ++static int __init ++crisv32_ethernet_init(void) ++{ ++ struct crisv32_ethernet_local *np; ++ int ret = 0; ++ ++ printk("ETRAX FS 10/100MBit ethernet v0.01 (c)" ++ " 2003 Axis Communications AB\n"); ++ ++#ifdef CONFIG_ETRAX_ETHERNET_IFACE0 ++{ ++ int iface0 = 0; ++ /* Default MAC address for interface 0. ++ * The real one will be set later. */ ++ static struct sockaddr default_mac_iface0 = ++ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x00}}; ++ ++ if (!(crisv32_dev[iface0] = alloc_etherdev(sizeof *np))) ++ return -ENOMEM; ++ ++ ret |= crisv32_ethernet_device_init(crisv32_dev[iface0]); ++ ++#if defined(CONFIG_ETRAX_ETH0_USE_LEDGRP0) ++ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface0]); ++#elif defined(CONFIG_ETRAX_ETH0_USE_LEDGRP1) ++ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface0]); ++#else ++ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface0]); ++#endif ++ ++ np = (struct crisv32_ethernet_local *) crisv32_dev[iface0]->priv; ++ np->eth_inst = regi_eth0; ++ np->dma_out_inst = regi_dma0; ++ np->dma_in_inst = regi_dma1; ++ ++ register_netdev(crisv32_dev[iface0]); ++ ++ /* Set up default MAC address */ ++ memcpy(crisv32_dev[iface0]->dev_addr, default_mac_iface0.sa_data, 6); ++ crisv32_eth_set_mac_address(crisv32_dev[iface0], &default_mac_iface0); ++ if (crisv32_eth_request_irqdma(crisv32_dev[iface0])) ++ printk("%s: eth0 unable to allocate IRQ and DMA resources\n", ++ __func__); ++ np->txpackets = 0; ++ crisv32_eth_init_rings(crisv32_dev[iface0]); ++ crisv32_eth_setup_controller(crisv32_dev[iface0]); ++} ++#endif /* CONFIG_ETRAX_ETHERNET_IFACE0 */ ++ ++#ifdef CONFIG_ETRAX_ETHERNET_IFACE1 ++{ ++ int iface1 = 0; ++ /* Default MAC address for interface 1. ++ * The real one will be set later. */ ++ static struct sockaddr default_mac_iface1 = ++ {0, {0x00, 0x40, 0x8C, 0xCD, 0x00, 0x01}}; ++ ++ if (crisv32_pinmux_alloc_fixed(pinmux_eth1)) ++ panic("Eth pinmux\n"); ++ ++ /* Increase index to device array if interface 0 is enabled as well.*/ ++#ifdef CONFIG_ETRAX_ETHERNET_IFACE0 ++ iface1++; ++#endif ++ if (!(crisv32_dev[iface1] = alloc_etherdev(sizeof *np))) ++ return -ENOMEM; ++ ++ ret |= crisv32_ethernet_device_init(crisv32_dev[iface1]); ++ ++#if defined(CONFIG_ETRAX_ETH1_USE_LEDGRP0) ++ crisv32_init_leds(LED_GRP_0,crisv32_dev[iface1]); ++#elif defined(CONFIG_ETRAX_ETH1_USE_LEDGRP1) ++ crisv32_init_leds(LED_GRP_1,crisv32_dev[iface1]); ++#else ++ crisv32_init_leds(LED_GRP_NONE,crisv32_dev[iface1]); ++#endif ++ ++ np = (struct crisv32_ethernet_local *) crisv32_dev[iface1]->priv; ++ np->eth_inst = regi_eth1; ++ np->dma_out_inst = regi_dma6; ++ np->dma_in_inst = regi_dma7; ++ ++ register_netdev(crisv32_dev[iface1]); ++ ++ /* Set up default MAC address */ ++ memcpy(crisv32_dev[iface1]->dev_addr, default_mac_iface1.sa_data, 6); ++ crisv32_eth_set_mac_address(crisv32_dev[iface1], &default_mac_iface1); ++ ++ if (crisv32_eth_request_irqdma(crisv32_dev[iface1])) ++ printk("%s: eth1 unable to allocate IRQ and DMA resources\n", ++ __func__); ++ np->txpackets = 0; ++ crisv32_eth_init_rings(crisv32_dev[iface1]); ++ crisv32_eth_setup_controller(crisv32_dev[iface1]); ++} ++#endif /* CONFIG_ETRAX_ETHERNET_IFACE1 */ ++ ++#ifdef CONFIG_CPU_FREQ ++ cpufreq_register_notifier(&crisv32_ethernet_freq_notifier_block, ++ CPUFREQ_TRANSITION_NOTIFIER); ++#endif ++ ++ return ret; ++} ++ ++static int __init ++crisv32_ethernet_device_init(struct net_device* dev) ++{ ++ struct timer_list timer_init = TIMER_INITIALIZER(NULL, 0, 0); ++ struct crisv32_ethernet_local *np; ++ ++ dev->base_addr = 0; /* Just to have something to show. */ ++ ++ /* we do our own locking */ ++ dev->features |= NETIF_F_LLTX; ++ ++ /* We use several IRQs and DMAs so just report 0 here. */ ++ dev->irq = 0; ++ dev->dma = 0; ++ ++ /* ++ * Fill in our handlers so the network layer can talk to us in the ++ * future. ++ */ ++ dev->open = crisv32_eth_open; ++ dev->hard_start_xmit = crisv32_eth_send_packet; ++ dev->stop = crisv32_eth_close; ++ dev->get_stats = crisv32_get_stats; ++ dev->set_multicast_list = crisv32_eth_set_multicast_list; ++ dev->set_mac_address = crisv32_eth_set_mac_address; ++ dev->ethtool_ops = &crisv32_ethtool_ops; ++ dev->do_ioctl = crisv32_eth_ioctl; ++ dev->set_config = crisv32_eth_set_config; ++ dev->tx_timeout = crisv32_eth_tx_timeout; ++#ifdef CONFIG_NET_POLL_CONTROLLER ++ dev->poll_controller = crisv32_netpoll; ++#endif ++ ++ np = netdev_priv(dev); ++ ++ spin_lock_init(&np->lock); ++ spin_lock_init(&np->transceiver_lock); ++ ++ /* Initialize speed indicator stuff. */ ++ np->current_speed = 10; ++ np->current_speed_selection = 0; /* Auto. */ ++ np->speed_timer = timer_init; ++ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; ++ np->speed_timer.data = (unsigned long) dev; ++ np->speed_timer.function = crisv32_eth_check_speed; ++ ++ np->full_duplex = 0; ++ np->current_duplex = autoneg; ++ np->duplex_timer = timer_init; ++ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; ++ np->duplex_timer.data = (unsigned long) dev; ++ np->duplex_timer.function = crisv32_eth_check_duplex; ++ ++ return 0; ++} ++ ++static int ++crisv32_eth_open(struct net_device *dev) ++{ ++ struct sockaddr mac_addr; ++ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 }; ++ reg_dma_rw_cfg dma_cfg = { .en = 1 }; ++ reg_eth_rw_clr_err clr_err = {.clr = regk_eth_yes}; ++ int intr_mask_nw = 0x1cff; ++ int eth_ack_intr = 0xffff; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->lock); ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ np->gigabit_mode = 0; ++#endif ++ crisv32_disable_tx_ints(np); ++ crisv32_disable_rx_ints(np); ++ ++ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); ++ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, eth_ack_intr); ++ REG_WR_INT(eth, np->eth_inst, rw_intr_mask, intr_mask_nw); ++ crisv32_eth_reset_rings(dev); ++ ++ /* Give the hardware an idea of what MAC address we want. */ ++ memcpy(mac_addr.sa_data, dev->dev_addr, dev->addr_len); ++ crisv32_eth_set_mac_address(dev, &mac_addr); ++ ++ /* Enable irq and make sure that the irqs are cleared. */ ++ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); ++ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); ++ ++ /* Prepare input DMA. */ ++ DMA_RESET(np->dma_in_inst); ++ DMA_ENABLE(np->dma_in_inst); ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ DMA_WR_CMD(np->dma_in_inst, regk_dma_set_w_size2); ++#endif ++ DMA_START_CONTEXT( np->dma_in_inst, virt_to_phys(&np->ctxt_in)); ++ DMA_CONTINUE(np->dma_in_inst); ++ crisv32_enable_rx_ints(np); ++ crisv32_start_receiver(np); ++ ++ /* Prepare output DMA. */ ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ DMA_WR_CMD(np->dma_out_inst, regk_dma_set_w_size4); ++#endif ++ REG_WR(dma, np->dma_out_inst, rw_cfg, dma_cfg); ++ netif_start_queue(dev); ++ crisv32_enable_tx_ints(np); ++ ++ /* Start duplex/speed timers */ ++ add_timer(&np->speed_timer); ++ add_timer(&np->duplex_timer); ++ ++ spin_unlock(&np->lock); ++ /* ++ * We are now ready to accept transmit requeusts from the queueing ++ * layer of the networking. ++ */ ++ netif_carrier_on(dev); ++ ++ return 0; ++} ++ ++static int ++crisv32_eth_close(struct net_device *dev) ++{ ++ reg_dma_rw_ack_intr ack_intr = {0}; ++ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ unsigned long flags; ++ ++ printk(KERN_INFO "Closing %s.\n", dev->name); ++ ++ /* stop the receiver before the DMA channels to avoid overruns. */ ++ crisv32_stop_receiver(np); ++ ++ spin_lock_irqsave(&np->lock, flags); ++ netif_stop_queue(dev); ++ ++ /* Reset the TX DMA in case it has hung on something. */ ++ DMA_RESET(np->dma_in_inst); ++ ++ /* Stop DMA */ ++ DMA_STOP(np->dma_in_inst); ++ DMA_STOP(np->dma_out_inst); ++ ++ /* Disable irq and make sure that the irqs are cleared. */ ++ crisv32_disable_tx_ints(np); ++ ack_intr.data = 1; ++ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); ++ ++ crisv32_disable_rx_ints(np); ++ ack_intr.in_eop = 1; ++ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); ++ ++ np->sender_started = 0; ++ spin_unlock_irqrestore(&np->lock, flags); ++ ++ /* Update the statistics. */ ++ update_rx_stats(np); ++ update_tx_stats(np); ++ ++ /* Stop speed/duplex timers */ ++ del_timer(&np->speed_timer); ++ del_timer(&np->duplex_timer); ++ ++ return 0; ++} ++ ++static int ++crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr) ++{ ++ int i; ++ unsigned char *addr = ((struct sockaddr*)vpntr)->sa_data; ++ ++ reg_eth_rw_ma0_lo ma0_lo = ++ { addr[0] | (addr[1] << 8) | (addr[2] << 16) | (addr[3] << 24)}; ++ ++ reg_eth_rw_ma0_hi ma0_hi = { addr[4] | (addr[5] << 8) }; ++ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ /* Remember the address. */ ++ memcpy(dev->dev_addr, addr, dev->addr_len); ++ ++ /* ++ * Write the address to the hardware. ++ * Note the way the address is wrapped: ++ * ma0_l0 = a0_0 | (a0_1 << 8) | (a0_2 << 16) | (a0_3 << 24); ++ * ma0_hi = a0_4 | (a0_5 << 8); ++ */ ++ REG_WR(eth, np->eth_inst, rw_ma0_lo, ma0_lo); ++ REG_WR(eth, np->eth_inst, rw_ma0_hi, ma0_hi); ++ ++ printk(KERN_INFO "%s: changed MAC to ", dev->name); ++ ++ for (i = 0; i < 5; i++) ++ printk("%02X:", dev->dev_addr[i]); ++ ++ printk("%02X\n", dev->dev_addr[i]); ++ ++ return 0; ++} ++ ++static irqreturn_t ++crisv32rx_eth_interrupt(int irq, void *dev_id) ++{ ++ reg_dma_r_masked_intr masked_in; ++ reg_dma_rw_cmd cmd = {0}; ++ reg_dma_rw_ack_intr ack_intr = {0}; ++ struct net_device *dev = (struct net_device *) dev_id; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ masked_in = REG_RD(dma, np->dma_in_inst, r_masked_intr); ++ ++ if (masked_in.in_eop) { ++ DEBUG(printk("EOP_IN interrupt\n")); ++ ++ /* Acknowledge input dma interrupt. */ ++ ack_intr.in_eop = 1; ++ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); ++ ++ np->new_rx_package = 1; ++ /* Check if complete packets were indeed received. */ ++ while (np->active_rx_desc->descr.in_eop == 1 ++ && np->new_rx_package) { ++ /* ++ * Take out the buffer and give it to the OS, then ++ * allocate a new buffer to put a packet in. ++ */ ++ crisv32_eth_receive_packet(dev); ++ ++ /* Update number of packets received. */ ++ np->stats.rx_packets++; ++ ++ /* Restarts input dma. */ ++ cmd.cont_data = 1; ++ REG_WR(dma, np->dma_in_inst, rw_cmd, cmd); ++ ++ /* Acknowledge input dma interrupt. */ ++ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); ++ } ++ } ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t ++crisv32tx_eth_interrupt(int irq, void *dev_id) ++{ ++ reg_dma_rw_stat stat; ++ dma_descr_data *dma_pos; ++ reg_dma_rw_ack_intr ack_intr = { .data = 1 }; ++ reg_dma_r_masked_intr masked_out; ++ ++ struct net_device *dev = (struct net_device *) dev_id; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ unsigned long flags; ++ ++ masked_out = REG_RD(dma, np->dma_out_inst, r_masked_intr); ++ ++ /* Get the current output dma position. */ ++ stat = REG_RD(dma, np->dma_out_inst, rw_stat); ++ if (stat.list_state == regk_dma_data_at_eol) ++ dma_pos = &np->active_tx_desc->descr; ++ else ++ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, ++ rw_data)); ++ ++ /* ack the interrupt */ ++ REG_WR(dma, np->dma_out_inst, rw_ack_intr, ack_intr); ++ ++ /* protect against ethernet excessive-col interrupts */ ++ spin_lock_irqsave(&np->lock, flags); ++ ++ /* Take care of transmited dma descriptors and report sent packet. */ ++ while (np->txpackets && ((&np->catch_tx_desc->descr != dma_pos) ++ || netif_queue_stopped(dev))) { ++ /* Update sent packet statistics. */ ++ np->stats.tx_bytes += np->catch_tx_desc->skb->len; ++ np->stats.tx_packets++; ++ ++ dev_kfree_skb_irq(np->catch_tx_desc->skb); ++ np->catch_tx_desc->skb = 0; ++ np->txpackets--; ++ np->catch_tx_desc = ++ phys_to_virt((int)np->catch_tx_desc->descr.next); ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ if (np->gigabit_mode) { ++ np->intmem_tx_buf_catch->free = 1; ++ np->intmem_tx_buf_catch = np->intmem_tx_buf_catch->next; ++ } ++#endif ++ netif_wake_queue(dev); ++ } ++ spin_unlock_irqrestore(&np->lock, flags); ++ return IRQ_HANDLED; ++} ++ ++ ++/* Update receive errors. */ ++static void ++update_rx_stats(struct crisv32_ethernet_local *np) ++{ ++ reg_eth_rs_rec_cnt r; ++ reg_eth_rs_phy_cnt rp; ++ ++ r = REG_RD(eth, np->eth_inst, rs_rec_cnt); ++ rp = REG_RD(eth, np->eth_inst, rs_phy_cnt); ++ ++ np->stats.rx_fifo_errors += r.congestion; ++ np->stats.rx_crc_errors += r.crc_err; ++ np->stats.rx_frame_errors += r.align_err; ++ np->stats.rx_length_errors += r.oversize; ++} ++ ++/* Update transmit errors. */ ++static void ++update_tx_stats(struct crisv32_ethernet_local *np) ++{ ++ reg_eth_rs_tr_cnt r; ++ ++ r = REG_RD(eth, np->eth_inst, rs_tr_cnt); ++ ++ np->stats.collisions += r.single_col + r.mult_col; ++ np->stats.tx_errors += r.deferred; ++} ++ ++/* Get current statistics. */ ++static struct net_device_stats * ++crisv32_get_stats(struct net_device *dev) ++{ ++ unsigned long flags; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ spin_lock_irqsave(&np->lock, flags); ++ ++ update_rx_stats(np); ++ update_tx_stats(np); ++ ++ spin_unlock_irqrestore(&np->lock, flags); ++ ++ return &np->stats; ++} ++ ++/* Check for network errors. This acknowledge the received interrupt. */ ++static irqreturn_t ++crisv32nw_eth_interrupt(int irq, void *dev_id) ++{ ++ struct net_device *dev = (struct net_device *) dev_id; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ reg_eth_r_masked_intr intr_mask; ++ int ack_intr = 0xffff; ++ reg_eth_rw_clr_err clr_err; ++ ++ intr_mask = REG_RD(eth, np->eth_inst, r_masked_intr); ++ ++ /* ++ * Check for underrun and/or excessive collisions. Note that the ++ * rw_clr_err register clears both underrun and excessive collision ++ * errors, so there's no need to check them separately. ++ */ ++ if (np->sender_started ++ && (intr_mask.urun || intr_mask.exc_col)) { ++ unsigned long flags; ++ dma_descr_data *dma_pos; ++ reg_dma_rw_stat stat; ++ ++ /* Get the current output dma position. */ ++ stat = REG_RD(dma, np->dma_out_inst, rw_stat); ++ if (stat.list_state == regk_dma_data_at_eol) ++ dma_pos = &np->active_tx_desc->descr; ++ else ++ dma_pos = phys_to_virt(REG_RD_INT(dma, ++ np->dma_out_inst, ++ rw_data)); ++ ++ /* ++ * Protect against the tx-interrupt messing with ++ * the tx-ring. ++ */ ++ spin_lock_irqsave(&np->lock, flags); ++ /* ++ * If we have more than one packet in the tx-ring ++ * drop one and move ahead. Upper layers rely on ++ * packeloss when doing congestion control. ++ */ ++ if (intr_mask.exc_col && np->txpackets > 1) { ++ dev_kfree_skb_irq(np->catch_tx_desc->skb); ++ np->catch_tx_desc->skb = 0; ++ np->catch_tx_desc = ++ phys_to_virt((int) ++ np->catch_tx_desc->descr.next); ++ np->txpackets--; ++ netif_wake_queue(dev); ++ } ++ np->ctxt_out.next = 0; ++ if (np->txpackets) { ++ np->ctxt_out.saved_data = (void *) ++ virt_to_phys(&np->catch_tx_desc->descr); ++ np->ctxt_out.saved_data_buf = ++ np->catch_tx_desc->descr.buf; ++ ++ /* restart the DMA */ ++ DMA_START_CONTEXT(np->dma_out_inst, ++ (int) virt_to_phys(&np->ctxt_out)); ++ } ++ else { ++ /* let the next packet restart the DMA */ ++ np->ctxt_out.saved_data = (void *) ++ virt_to_phys(&np->active_tx_desc->descr); ++ np->sender_started = 0; ++ } ++ ++ spin_unlock_irqrestore(&np->lock, flags); ++ np->stats.tx_errors++; ++ } ++ ++ REG_WR_INT(eth, np->eth_inst, rw_ack_intr, ack_intr); ++ clr_err.clr = 1; ++ REG_WR(eth, np->eth_inst, rw_clr_err, clr_err); ++ ++ update_rx_stats(np); ++ update_tx_stats(np); ++ ++ return IRQ_HANDLED; ++} ++ ++/* We have a good packet(s), get it/them out of the buffers. */ ++static void ++crisv32_eth_receive_packet(struct net_device *dev) ++{ ++ int length; ++ struct sk_buff *skb; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ struct sk_buff *tmp; ++ unsigned long flags; ++ ++ DEBUG(printk("crisv32_receive_packet\n")); ++ ++ /* Activate LED */ ++ spin_lock_irqsave(&np->leds->led_lock, flags); ++ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) { ++ /* light the network leds depending on the current speed. */ ++ crisv32_set_network_leds(LED_ACTIVITY, dev); ++ ++ /* Set the earliest time we may clear the LED */ ++ np->leds->led_next_time = jiffies + NET_FLASH_TIME; ++ np->leds->led_active = 1; ++ np->leds->clear_led_timer.data = (unsigned long) dev; ++ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10); ++ } ++ spin_unlock_irqrestore(&np->leds->led_lock, flags); ++ ++ /* Discard CRC (4 bytes). */ ++ length = (np->active_rx_desc->descr.after) - ++ (np->active_rx_desc->descr.buf) - 4; ++ ++ /* Update received packet statistics. */ ++ np->stats.rx_bytes += length; ++ ++ if (np->active_rx_desc != np->last_rx_desc) { ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ if (np->gigabit_mode) { ++ skb = dev_alloc_skb(length); ++ if(!skb) { ++ np->stats.rx_errors++; ++ printk(KERN_NOTICE "%s: memory squeeze," ++ " dropping packet.", dev->name); ++ return; ++ } ++ /* Allocate room for the packet body. */ ++ skb_put(skb, length - ETHER_HEAD_LEN); ++ /* Allocate room for the header and copy the data to ++ * the SKB */ ++ memcpy(skb_push(skb, ETHER_HEAD_LEN), ++ crisv32_intmem_phys_to_virt((unsigned long)np->active_rx_desc->descr.buf), length); ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ skb->ip_summed = CHECKSUM_NONE; ++ /* Send the packet to the upper layer. */ ++ netif_rx(skb); ++ np->last_rx_desc = ++ (void *) phys_to_virt(np->last_rx_desc->descr.next); ++ } else { ++#endif ++ tmp = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); ++ if (!tmp) { ++ np->stats.rx_errors++; ++ printk(KERN_NOTICE "%s: memory squeeze," ++ " dropping packet.", ++ dev->name); ++ return; ++ } ++ skb = np->active_rx_desc->skb; ++ np->active_rx_desc->skb = tmp; ++ skb_put(skb, length); ++ ++ np->active_rx_desc->descr.buf = ++ (void *) virt_to_phys(np->active_rx_desc->skb->data); ++ np->active_rx_desc->descr.after = ++ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE; ++ ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ skb->ip_summed = CHECKSUM_NONE; ++ ++ /* Send the packet to the upper layer. */ ++ netif_rx(skb); ++ np->last_rx_desc = ++ phys_to_virt((int) ++ np->last_rx_desc->descr.next); ++ } ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ } ++#endif ++ /* ++ * When the input DMA reaches eol precaution must be taken, otherwise ++ * the DMA could stop. The problem occurs if the eol flag is re-placed ++ * on the descriptor that the DMA stands on before the DMA proceed to ++ * the next descriptor. This case could, for example, happen if there ++ * is a traffic burst and then the network goes silent. To prevent this ++ * we make sure that we do not set the eol flag on the descriptor that ++ * the DMA stands on. ++ */ ++ if(virt_to_phys(&np->active_rx_desc->descr) != ++ REG_RD_INT(dma, np->dma_in_inst, rw_saved_data)) { ++ np->active_rx_desc->descr.after = ++ np->active_rx_desc->descr.buf + MAX_MEDIA_DATA_SIZE; ++ np->active_rx_desc->descr.eol = 1; ++ np->active_rx_desc->descr.in_eop = 0; ++ np->active_rx_desc = ++ phys_to_virt((int)np->active_rx_desc->descr.next); ++ barrier(); ++ np->prev_rx_desc->descr.eol = 0; ++ flush_dma_descr(&np->prev_rx_desc->descr, 0); // Workaround cache bug ++ np->prev_rx_desc = ++ phys_to_virt((int)np->prev_rx_desc->descr.next); ++ flush_dma_descr(&np->prev_rx_desc->descr, 1); // Workaround cache bug ++ } else { ++ np->new_rx_package = 0; ++ } ++} ++ ++/* ++ * This function (i.e. hard_start_xmit) is protected from concurent calls by a ++ * spinlock (xmit_lock) in the net_device structure. ++ */ ++static int ++crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ unsigned char *buf = skb->data; ++ unsigned long flags; ++ ++ dev->trans_start = jiffies; ++ ++ spin_lock_irqsave(&np->leds->led_lock, flags); ++ if (!np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) { ++ /* light the network leds depending on the current speed. */ ++ crisv32_set_network_leds(LED_ACTIVITY, dev); ++ ++ /* Set the earliest time we may clear the LED */ ++ np->leds->led_next_time = jiffies + NET_FLASH_TIME; ++ np->leds->led_active = 1; ++ np->leds->clear_led_timer.data = (unsigned long) dev; ++ mod_timer(&np->leds->clear_led_timer, jiffies + HZ/10); ++ } ++ spin_unlock_irqrestore(&np->leds->led_lock, flags); ++ ++ /* ++ * Need to disable irq to avoid updating pointer in interrupt while ++ * sending packets. ++ */ ++ spin_lock_irqsave(&np->lock, flags); ++ ++ np->active_tx_desc->skb = skb; ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ if (np->gigabit_mode) { ++ if(np->intmem_tx_buf_active->free) { ++ memcpy(np->intmem_tx_buf_active->buf, ++ skb->data, skb->len); ++ np->intmem_tx_buf_active->free = 0; ++ crisv32_eth_hw_send_packet( ++ np->intmem_tx_buf_active->buf, skb->len, np); ++ np->intmem_tx_buf_active = ++ np->intmem_tx_buf_active->next; ++ } else { ++ printk("%s: Internal tx memory buffer not free!\n\r", ++ __FILE__); ++ spin_unlock_irqrestore(&np->lock, flags); ++ return 1; ++ } ++ } ++ else ++#endif ++ { ++ crisv32_eth_hw_send_packet(buf, skb->len, np); ++ } ++ /* Stop queue if full. */ ++ if (np->active_tx_desc == np->catch_tx_desc) ++ netif_stop_queue(dev); ++ ++ np->txpackets++; ++ spin_unlock_irqrestore(&np->lock, flags); ++ ++ return 0; ++} ++ ++ ++static void ++crisv32_eth_hw_send_packet(unsigned char *buf, int length, void *priv) ++{ ++ struct crisv32_ethernet_local *np = ++ (struct crisv32_ethernet_local *) priv; ++ ++ /* Configure the tx dma descriptor. */ ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ if (np->gigabit_mode) { ++ np->active_tx_desc->descr.buf = (unsigned char *) crisv32_intmem_virt_to_phys(buf); ++ } else ++#endif ++ { ++ np->active_tx_desc->descr.buf = (unsigned char *) virt_to_phys(buf); ++ } ++ ++ np->active_tx_desc->descr.after = np->active_tx_desc->descr.buf + ++ length; ++ np->active_tx_desc->descr.intr = 1; ++ np->active_tx_desc->descr.out_eop = 1; ++ ++ /* Move eol. */ ++ np->active_tx_desc->descr.eol = 1; ++ np->prev_tx_desc->descr.eol = 0; ++ ++ ++ /* Update pointers. */ ++ np->prev_tx_desc = np->active_tx_desc; ++ np->active_tx_desc = phys_to_virt((int)np->active_tx_desc->descr.next); ++ ++ /* Start DMA. */ ++ crisv32_start_dma_out(np); ++} ++ ++static void ++crisv32_start_dma_out(struct crisv32_ethernet_local* np) ++{ ++ if (!np->sender_started) { ++ /* Start DMA for the first time. */ ++ np->ctxt_out.saved_data_buf = np->prev_tx_desc->descr.buf; ++ REG_WR(dma, np->dma_out_inst, rw_group_down, ++ (int) virt_to_phys(&np->ctxt_out)); ++ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); ++ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst); ++ np->sender_started = 1; ++ } else { ++ DMA_CONTINUE_DATA(np->dma_out_inst); ++ } ++} ++ ++/* ++ * Called by upper layers if they decide it took too long to complete sending ++ * a packet - we need to reset and stuff. ++ */ ++static void ++crisv32_eth_tx_timeout(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ reg_dma_rw_cfg cfg = {0}; ++ reg_dma_rw_stat stat = {0}; ++ unsigned long flags; ++ ++ printk(KERN_WARNING "%s: transmit timed out\n", dev->name); ++ ++ ++ spin_lock_irqsave(&np->lock, flags); ++ crisv32_ethernet_bug(dev); ++ ++ np->txpackets = 0; ++ /* Update error stats. */ ++ np->stats.tx_errors++; ++ ++ /* Reset the TX DMA in case it has hung on something. */ ++ cfg.en = 0; ++ REG_WR(dma, np->dma_out_inst, rw_cfg, cfg); ++ ++ do { ++ stat = REG_RD(dma, np->dma_out_inst, rw_stat); ++ } while (stat.mode != regk_dma_rst); ++ ++ /* Reset the tranceiver. */ ++ crisv32_eth_reset_tranceiver(dev); ++ ++ /* Get rid of the packets that never got an interrupt. */ ++ do { ++ if (np->catch_tx_desc->skb) ++ dev_kfree_skb(np->catch_tx_desc->skb); ++ ++ np->catch_tx_desc->skb = 0; ++ np->catch_tx_desc = ++ phys_to_virt((int)np->catch_tx_desc->descr.next); ++ } while (np->catch_tx_desc != np->active_tx_desc); ++ ++ ++ /* Start output DMA. */ ++ REG_WR(dma, np->dma_out_inst, rw_group_down, ++ (int) virt_to_phys(&np->ctxt_out)); ++ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_c); ++ DMA_WR_CMD(np->dma_out_inst, regk_dma_load_d | regk_dma_burst); ++ spin_unlock_irqrestore(&np->lock, flags); ++ ++ /* Tell the upper layers we're ok again. */ ++ netif_wake_queue(dev); ++} ++ ++/* ++ * Set or clear the multicast filter for this adaptor. ++ * num_addrs == -1 Promiscuous mode, receive all packets ++ * num_addrs == 0 Normal mode, clear multicast list ++ * num_addrs > 0 Multicast mode, receive normal and MC packets, ++ * and do best-effort filtering. ++ */ ++static void ++crisv32_eth_set_multicast_list(struct net_device *dev) ++{ ++ int num_addr = dev->mc_count; ++ unsigned long int lo_bits; ++ unsigned long int hi_bits; ++ reg_eth_rw_rec_ctrl rec_ctrl = {0}; ++ reg_eth_rw_ga_lo ga_lo = {0}; ++ reg_eth_rw_ga_hi ga_hi = {0}; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ if (dev->flags & IFF_PROMISC) { ++ /* Promiscuous mode. */ ++ lo_bits = 0xfffffffful; ++ hi_bits = 0xfffffffful; ++ ++ /* Enable individual receive. */ ++ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, ++ rw_rec_ctrl); ++ rec_ctrl.individual = regk_eth_yes; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++ } else if (dev->flags & IFF_ALLMULTI) { ++ /* Enable all multicasts. */ ++ lo_bits = 0xfffffffful; ++ hi_bits = 0xfffffffful; ++ ++ /* Disable individual receive */ ++ rec_ctrl = ++ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); ++ rec_ctrl.individual = regk_eth_no; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++ } else if (num_addr == 0) { ++ /* Normal, clear the mc list. */ ++ lo_bits = 0x00000000ul; ++ hi_bits = 0x00000000ul; ++ ++ /* Disable individual receive */ ++ rec_ctrl = ++ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); ++ rec_ctrl.individual = regk_eth_no; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++ } else { ++ /* MC mode, receive normal and MC packets. */ ++ char hash_ix; ++ struct dev_mc_list *dmi = dev->mc_list; ++ int i; ++ char *baddr; ++ lo_bits = 0x00000000ul; ++ hi_bits = 0x00000000ul; ++ ++ for (i = 0; i < num_addr; i++) { ++ /* Calculate the hash index for the GA registers. */ ++ hash_ix = 0; ++ baddr = dmi->dmi_addr; ++ hash_ix ^= (*baddr) & 0x3f; ++ hash_ix ^= ((*baddr) >> 6) & 0x03; ++ ++baddr; ++ hash_ix ^= ((*baddr) << 2) & 0x03c; ++ hash_ix ^= ((*baddr) >> 4) & 0xf; ++ ++baddr; ++ hash_ix ^= ((*baddr) << 4) & 0x30; ++ hash_ix ^= ((*baddr) >> 2) & 0x3f; ++ ++baddr; ++ hash_ix ^= (*baddr) & 0x3f; ++ hash_ix ^= ((*baddr) >> 6) & 0x03; ++ ++baddr; ++ hash_ix ^= ((*baddr) << 2) & 0x03c; ++ hash_ix ^= ((*baddr) >> 4) & 0xf; ++ ++baddr; ++ hash_ix ^= ((*baddr) << 4) & 0x30; ++ hash_ix ^= ((*baddr) >> 2) & 0x3f; ++ ++ hash_ix &= 0x3f; ++ ++ if (hash_ix > 32) ++ hi_bits |= (1 << (hash_ix - 32)); ++ else ++ lo_bits |= (1 << hash_ix); ++ ++ dmi = dmi->next; ++ } ++ ++ /* Disable individual receive. */ ++ rec_ctrl = ++ (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, rw_rec_ctrl); ++ rec_ctrl.individual = regk_eth_no; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++ } ++ ++ ga_lo.tbl = (unsigned int) lo_bits; ++ ga_hi.tbl = (unsigned int) hi_bits; ++ ++ REG_WR(eth, np->eth_inst, rw_ga_lo, ga_lo); ++ REG_WR(eth, np->eth_inst, rw_ga_hi, ga_hi); ++} ++ ++static int ++crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ struct mii_ioctl_data *data = if_mii(ifr); ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ int old_autoneg; ++ ++ spin_lock(&np->lock); /* Preempt protection */ ++ switch (cmd) { ++ case SIOCGMIIPHY: /* Get PHY address */ ++ data->phy_id = np->mdio_phy_addr; ++ break; ++ case SIOCGMIIREG: /* Read MII register */ ++ data->val_out = crisv32_eth_get_mdio_reg(dev, ++ data->reg_num); ++ break; ++ case SIOCSMIIREG: /* Write MII register */ ++ crisv32_eth_set_mdio_reg(dev, data->reg_num, ++ data->val_in); ++ break; ++ case SET_ETH_ENABLE_LEDS: ++ use_network_leds = 1; ++ break; ++ case SET_ETH_DISABLE_LEDS: ++ use_network_leds = 0; ++ break; ++ case SET_ETH_AUTONEG: ++ old_autoneg = autoneg_normal; ++ autoneg_normal = *(int*)data; ++ if (autoneg_normal != old_autoneg) ++ crisv32_eth_negotiate(dev); ++ break; ++ default: ++ spin_unlock(&np->lock); /* Preempt protection */ ++ return -EINVAL; ++ } ++ spin_unlock(&np->lock); ++ return 0; ++} ++ ++static int crisv32_eth_get_settings(struct net_device *dev, ++ struct ethtool_cmd *ecmd) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ /* What about GMII and 1000xpause? not included in ethtool.h */ ++ ecmd->supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | ++ SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | ++ SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ ecmd->supported |= SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full; ++#endif ++ ecmd->port = PORT_TP; ++ ecmd->transceiver = XCVR_EXTERNAL; ++ ecmd->phy_address = np->mdio_phy_addr; ++ ecmd->speed = np->current_speed; ++ ecmd->duplex = np->full_duplex; ++ ecmd->advertising = ADVERTISED_TP; ++ ++ if (np->current_duplex == autoneg && np->current_speed_selection == 0) ++ ecmd->advertising |= ADVERTISED_Autoneg; ++ else { ++ ecmd->advertising |= ++ ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | ++ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ ecmd->advertising |= ADVERTISED_1000baseT_Half | ++ ADVERTISED_1000baseT_Full; ++#endif ++ if (np->current_speed_selection == 10) ++ ecmd->advertising &= ~(ADVERTISED_100baseT_Half | ++ ADVERTISED_100baseT_Full | ++ ADVERTISED_1000baseT_Half | ++ ADVERTISED_1000baseT_Full); ++ ++ else if (np->current_speed_selection == 100) ++ ecmd->advertising &= ~(ADVERTISED_10baseT_Half | ++ ADVERTISED_10baseT_Full | ++ ADVERTISED_1000baseT_Half | ++ ADVERTISED_1000baseT_Full); ++ ++ else if (np->current_speed_selection == 1000) ++ ecmd->advertising &= ~(ADVERTISED_10baseT_Half | ++ ADVERTISED_10baseT_Full | ++ ADVERTISED_100baseT_Half | ++ ADVERTISED_100baseT_Full); ++ ++ if (np->current_duplex == half) ++ ecmd->advertising &= ~(ADVERTISED_10baseT_Full | ++ ADVERTISED_100baseT_Full | ++ ADVERTISED_1000baseT_Full); ++ else if (np->current_duplex == full) ++ ecmd->advertising &= ~(ADVERTISED_10baseT_Half | ++ ADVERTISED_100baseT_Half | ++ ADVERTISED_1000baseT_Half); ++ } ++ ++ ecmd->autoneg = AUTONEG_ENABLE; ++ return 0; ++} ++ ++static int crisv32_eth_set_settings(struct net_device *dev, ++ struct ethtool_cmd *ecmd) ++{ ++ if (ecmd->autoneg == AUTONEG_ENABLE) { ++ crisv32_eth_set_duplex(dev, autoneg); ++ crisv32_eth_set_speed(dev, 0); ++ } else { ++ crisv32_eth_set_duplex(dev, ecmd->duplex); ++ crisv32_eth_set_speed(dev, ecmd->speed); ++ } ++ ++ return 0; ++} ++ ++static void crisv32_eth_get_drvinfo(struct net_device *dev, ++ struct ethtool_drvinfo *info) ++{ ++ strncpy(info->driver, "ETRAX FS", sizeof(info->driver) - 1); ++ strncpy(info->version, "$Revision: 1.96 $", sizeof(info->version) - 1); ++ strncpy(info->fw_version, "N/A", sizeof(info->fw_version) - 1); ++ strncpy(info->bus_info, "N/A", sizeof(info->bus_info) - 1); ++} ++ ++static int crisv32_eth_nway_reset(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ if (np->current_duplex == autoneg && np->current_speed_selection == 0) ++ crisv32_eth_negotiate(dev); ++ return 0; ++} ++ ++static struct ethtool_ops crisv32_ethtool_ops = { ++ .get_settings = crisv32_eth_get_settings, ++ .set_settings = crisv32_eth_set_settings, ++ .get_drvinfo = crisv32_eth_get_drvinfo, ++ .nway_reset = crisv32_eth_nway_reset, ++ .get_link = ethtool_op_get_link, ++}; ++ ++/* Is this function really needed? Use ethtool instead? */ ++static int ++crisv32_eth_set_config(struct net_device *dev, struct ifmap *map) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->lock); /* Preempt protection */ ++ ++ switch(map->port) { ++ case IF_PORT_UNKNOWN: ++ /* Use autoneg */ ++ crisv32_eth_set_speed(dev, 0); ++ crisv32_eth_set_duplex(dev, autoneg); ++ break; ++ case IF_PORT_10BASET: ++ crisv32_eth_set_speed(dev, 10); ++ crisv32_eth_set_duplex(dev, autoneg); ++ break; ++ case IF_PORT_100BASET: ++ case IF_PORT_100BASETX: ++ crisv32_eth_set_speed(dev, 100); ++ crisv32_eth_set_duplex(dev, autoneg); ++ break; ++ case IF_PORT_100BASEFX: ++ case IF_PORT_10BASE2: ++ case IF_PORT_AUI: ++ spin_unlock(&np->lock); ++ return -EOPNOTSUPP; ++ break; ++ default: ++ printk(KERN_ERR "%s: Invalid media selected", ++ dev->name); ++ spin_unlock(&np->lock); ++ return -EINVAL; ++ } ++ spin_unlock(&np->lock); ++ return 0; ++} ++ ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++/* ++ * Switch the behaviour of the tx and rx buffers using ++ * external or internal memory. Usage of the internal ++ * memory is required for gigabit operation. ++ */ ++static void ++crisv32_eth_switch_intmem_usage(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ int i; ++ reg_dma_rw_stat stat; ++ reg_dma_rw_cfg cfg = {0}; ++ reg_dma_rw_intr_mask intr_mask_in = { .in_eop = regk_dma_yes }; ++ reg_dma_rw_ack_intr ack_intr = { .data = 1,.in_eop = 1 }; ++ unsigned char *intmem_tmp; ++ ++ /* Notify the kernel that the interface has stopped */ ++ netif_stop_queue(dev); ++ ++ /* Stop the receiver DMA */ ++ cfg.en = regk_dma_no; ++ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg); ++ ++ if (!(np->gigabit_mode)) { ++ /* deallocate SKBs in rx_desc */ ++ for (i = 0; i < NBR_RX_DESC; i++) ++ dev_kfree_skb(np->dma_rx_descr_list[i].skb); ++ ++ /* Init TX*/ ++ for(i=0; i < NBR_INTMEM_TX_BUF; i++) { ++ /* Allocate internal memory */ ++ intmem_tmp = NULL; ++ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE, ++ 32); ++ /* Check that we really got the memory */ ++ if (intmem_tmp == NULL) { ++ printk(KERN_ERR "%s: Can't allocate intmem for" ++ " RX buffer nbr: %d\n", dev->name, i); ++ return; ++ } ++ /* Setup the list entry */ ++ np->tx_intmem_buf_list[i].free = 1; ++ np->tx_intmem_buf_list[i].buf = intmem_tmp; ++ np->tx_intmem_buf_list[i].next = &np->tx_intmem_buf_list[i + 1]; ++ } ++ /* Setup the last list entry */ ++ np->tx_intmem_buf_list[NBR_INTMEM_TX_BUF - 1].next = &np->tx_intmem_buf_list[0]; ++ /* Setup initial pointer */ ++ np->intmem_tx_buf_active = np->tx_intmem_buf_list; ++ np->intmem_tx_buf_catch = np->tx_intmem_buf_list; ++ ++ /* Init RX */ ++ for (i=0; i < NBR_INTMEM_RX_DESC; i++) { ++ /* Allocate internal memory */ ++ intmem_tmp = NULL; ++ intmem_tmp = crisv32_intmem_alloc(MAX_MEDIA_DATA_SIZE, 32); ++ /* Check that we really got the memory */ ++ if (intmem_tmp == NULL) { ++ printk(KERN_ERR "%s: Can't allocate intmem for" ++ " desc nbr: %d\n", dev->name, i); ++ return; ++ } ++ /* Setup the descriptors*/ ++ np->dma_rx_descr_list[i].skb = NULL; ++ np->dma_rx_descr_list[i].descr.buf = ++ (void *) crisv32_intmem_virt_to_phys(intmem_tmp); ++ np->dma_rx_descr_list[i].descr.after = ++ (void *) crisv32_intmem_virt_to_phys(intmem_tmp + MAX_MEDIA_DATA_SIZE); ++ np->dma_rx_descr_list[i].descr.eol = 0; ++ np->dma_rx_descr_list[i].descr.in_eop = 0; ++ np->dma_rx_descr_list[i].descr.next = ++ (void *) virt_to_phys(&np->dma_rx_descr_list[i+1].descr); ++ } ++ /* Setup the last rx descriptor */ ++ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.eol = 1; ++ np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1].descr.next = ++ (void*) virt_to_phys(&np->dma_rx_descr_list[0].descr); ++ /* Initialise initial receive pointers. */ ++ np->active_rx_desc = &np->dma_rx_descr_list[0]; ++ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_INTMEM_RX_DESC - 1]; ++ np->last_rx_desc = np->prev_rx_desc; ++ ++ np->gigabit_mode = 1; ++ } else { ++ /* dealloc TX intmem */ ++ for(i=0; i < NBR_INTMEM_TX_BUF; i++) ++ crisv32_intmem_free(np->tx_intmem_buf_list[i].buf); ++ ++ /* dealloc RX intmem */ ++ for (i=0; i < NBR_INTMEM_RX_DESC; i++) ++ crisv32_intmem_free(crisv32_intmem_phys_to_virt((unsigned long)np->dma_rx_descr_list[i].descr.buf)); ++ ++ /* Setup new rx_desc and alloc SKBs */ ++ for (i = 0; i < NBR_RX_DESC; i++) { ++ struct sk_buff *skb; ++ ++ skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE); ++ np->dma_rx_descr_list[i].skb = skb; ++ np->dma_rx_descr_list[i].descr.buf = ++ (char*)virt_to_phys(skb->data); ++ np->dma_rx_descr_list[i].descr.after = ++ (char*)virt_to_phys(skb->data + MAX_MEDIA_DATA_SIZE); ++ ++ np->dma_rx_descr_list[i].descr.eol = 0; ++ np->dma_rx_descr_list[i].descr.in_eop = 0; ++ np->dma_rx_descr_list[i].descr.next = ++ (void *) virt_to_phys(&np->dma_rx_descr_list[i + 1].descr); ++ } ++ ++ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.eol = 1; ++ np->dma_rx_descr_list[NBR_RX_DESC - 1].descr.next = ++ (void *) virt_to_phys(&np->dma_rx_descr_list[0].descr); ++ ++ /* Initialise initial receive pointers. */ ++ np->active_rx_desc = &np->dma_rx_descr_list[0]; ++ np->prev_rx_desc = &np->dma_rx_descr_list[NBR_RX_DESC - 1]; ++ np->last_rx_desc = np->prev_rx_desc; ++ ++ np->gigabit_mode = 0; ++ } ++ ++ /* Fill context descriptors. */ ++ np->ctxt_in.next = 0; ++ np->ctxt_in.saved_data = ++ (dma_descr_data *) virt_to_phys(&np->dma_rx_descr_list[0].descr); ++ np->ctxt_in.saved_data_buf = np->dma_rx_descr_list[0].descr.buf; ++ ++ /* Enable irq and make sure that the irqs are cleared. */ ++ REG_WR(dma, np->dma_in_inst, rw_intr_mask, intr_mask_in); ++ REG_WR(dma, np->dma_in_inst, rw_ack_intr, ack_intr); ++ ++ /* Start input dma */ ++ cfg.en = regk_dma_yes; ++ REG_WR(dma, np->dma_in_inst, rw_cfg, cfg); ++ REG_WR(dma, np->dma_in_inst, rw_group_down, ++ (int) virt_to_phys(&np->ctxt_in)); ++ ++ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_c); ++ DMA_WR_CMD(np->dma_in_inst, regk_dma_load_d | regk_dma_burst); ++ ++ netif_wake_queue(dev); ++ ++ stat = REG_RD(dma, np->dma_in_inst, rw_stat); ++} ++#endif ++ ++static void ++crisv32_eth_negotiate(struct net_device *dev) ++{ ++ unsigned short data = ++ crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE); ++ unsigned short ctrl1000 = ++ crisv32_eth_get_mdio_reg(dev, MII_CTRL1000); ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ /* Make all capabilities available */ ++ data |= ADVERTISE_10HALF | ADVERTISE_10FULL | ++ ADVERTISE_100HALF | ADVERTISE_100FULL; ++ ctrl1000 |= ADVERTISE_1000HALF | ADVERTISE_1000FULL; ++ ++ /* Remove the speed capabilities that we that do not want */ ++ switch (np->current_speed_selection) { ++ case 10 : ++ data &= ~(ADVERTISE_100HALF | ADVERTISE_100FULL); ++ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); ++ break; ++ case 100 : ++ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL); ++ ctrl1000 &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL); ++ break; ++ case 1000 : ++ data &= ~(ADVERTISE_10HALF | ADVERTISE_10FULL | ++ ADVERTISE_100HALF | ADVERTISE_100FULL); ++ break; ++ } ++ ++ /* Remove the duplex capabilites that we do not want */ ++ if (np->current_duplex == full) { ++ data &= ~(ADVERTISE_10HALF | ADVERTISE_100HALF); ++ ctrl1000 &= ~(ADVERTISE_1000HALF); ++ } ++ else if (np->current_duplex == half) { ++ data &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL); ++ ctrl1000 &= ~(ADVERTISE_1000FULL); ++ } ++ ++ crisv32_eth_set_mdio_reg(dev, MII_ADVERTISE, data); ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ crisv32_eth_set_mdio_reg(dev, MII_CTRL1000, ctrl1000); ++#endif ++ ++ /* Renegotiate with link partner */ ++ if (autoneg_normal) { ++ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR); ++ data |= BMCR_ANENABLE | BMCR_ANRESTART; ++ } ++ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data); ++} ++static void ++crisv32_eth_check_speed(unsigned long idev) ++{ ++ static int led_initiated = 0; ++ struct net_device *dev = (struct net_device *) idev; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ unsigned long data; ++ int old_speed; ++ unsigned long flags; ++ ++ BUG_ON(!np); ++ BUG_ON(!np->transceiver); ++ ++ spin_lock(&np->transceiver_lock); ++ ++ old_speed = np->current_speed; ++ data = crisv32_eth_get_mdio_reg(dev, MII_BMSR); ++ ++ if (!(data & BMSR_LSTATUS)) ++ np->current_speed = 0; ++ else ++ np->transceiver->check_speed(dev); ++ ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ if ((old_speed != np->current_speed) ++ && ((old_speed == 1000) || (np->current_speed == 1000))) { ++ /* Switch between mii and gmii */ ++ reg_eth_rw_gen_ctrl gen_ctrl = REG_RD(eth, np->eth_inst, ++ rw_gen_ctrl); ++ reg_eth_rw_tr_ctrl tr_ctrl = REG_RD(eth, np->eth_inst, ++ rw_tr_ctrl); ++ if (old_speed == 1000) { ++ gen_ctrl.phy = regk_eth_mii; ++ gen_ctrl.gtxclk_out = regk_eth_no; ++ tr_ctrl.carrier_ext = regk_eth_no; ++ } ++ else { ++ gen_ctrl.phy = regk_eth_gmii; ++ gen_ctrl.gtxclk_out = regk_eth_yes; ++ tr_ctrl.carrier_ext = regk_eth_yes; ++ } ++ REG_WR(eth, np->eth_inst, rw_tr_ctrl, tr_ctrl); ++ REG_WR(eth, np->eth_inst, rw_gen_ctrl, gen_ctrl); ++ ++ crisv32_eth_switch_intmem_usage(dev); ++ } ++#endif ++ ++ spin_lock_irqsave(&np->leds->led_lock, flags); ++ if ((old_speed != np->current_speed) || !led_initiated) { ++ led_initiated = 1; ++ np->leds->clear_led_timer.data = (unsigned long) dev; ++ if (np->current_speed) { ++ netif_carrier_on(dev); ++ crisv32_set_network_leds(LED_LINK, dev); ++ } else { ++ netif_carrier_off(dev); ++ crisv32_set_network_leds(LED_NOLINK, dev); ++ } ++ } ++ spin_unlock_irqrestore(&np->leds->led_lock, flags); ++ ++ /* Reinitialize the timer. */ ++ np->speed_timer.expires = jiffies + NET_LINK_UP_CHECK_INTERVAL; ++ add_timer(&np->speed_timer); ++ ++ spin_unlock(&np->transceiver_lock); ++} ++ ++static void ++crisv32_eth_set_speed(struct net_device *dev, unsigned long speed) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ spin_lock(&np->transceiver_lock); ++ if (np->current_speed_selection != speed) { ++ np->current_speed_selection = speed; ++ crisv32_eth_negotiate(dev); ++ } ++ spin_unlock(&np->transceiver_lock); ++} ++ ++static void ++crisv32_eth_check_duplex(unsigned long idev) ++{ ++ struct net_device *dev = (struct net_device *) idev; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ reg_eth_rw_rec_ctrl rec_ctrl; ++ int old_duplex = np->full_duplex; ++ ++ np->transceiver->check_duplex(dev); ++ ++ if (old_duplex != np->full_duplex) { ++ /* Duplex changed. */ ++ rec_ctrl = (reg_eth_rw_rec_ctrl) REG_RD(eth, np->eth_inst, ++ rw_rec_ctrl); ++ rec_ctrl.duplex = np->full_duplex; ++ REG_WR(eth, np->eth_inst, rw_rec_ctrl, rec_ctrl); ++ } ++ ++ /* Reinitialize the timer. */ ++ np->duplex_timer.expires = jiffies + NET_DUPLEX_CHECK_INTERVAL; ++ add_timer(&np->duplex_timer); ++} ++ ++static void ++crisv32_eth_set_duplex(struct net_device *dev, enum duplex new_duplex) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ spin_lock(&np->transceiver_lock); ++ if (np->current_duplex != new_duplex) { ++ np->current_duplex = new_duplex; ++ crisv32_eth_negotiate(dev); ++ } ++ spin_unlock(&np->transceiver_lock); ++} ++ ++static int ++crisv32_eth_probe_transceiver(struct net_device *dev) ++{ ++ unsigned int phyid_high; ++ unsigned int phyid_low; ++ unsigned int oui; ++ struct transceiver_ops *ops = NULL; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ /* Probe MDIO physical address. */ ++ for (np->mdio_phy_addr = 0; ++ np->mdio_phy_addr <= 31; np->mdio_phy_addr++) { ++ if (crisv32_eth_get_mdio_reg(dev, MII_BMSR) != 0xffff) ++ break; ++ } ++ ++ if (np->mdio_phy_addr == 32) ++ return -ENODEV; ++ ++ /* Get manufacturer. */ ++ phyid_high = crisv32_eth_get_mdio_reg(dev, MII_PHYSID1); ++ phyid_low = crisv32_eth_get_mdio_reg(dev, MII_PHYSID2); ++ ++ oui = (phyid_high << 6) | (phyid_low >> 10); ++ ++ for (ops = &transceivers[0]; ops->oui; ops++) { ++ if (ops->oui == oui) ++ break; ++ } ++ ++ np->transceiver = ops; ++ return 0; ++} ++ ++static void ++generic_check_speed(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE); ++ if ((data & ADVERTISE_100FULL) || ++ (data & ADVERTISE_100HALF)) ++ np->current_speed = 100; ++ else ++ np->current_speed = 10; ++} ++ ++static void ++generic_check_duplex(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MII_ADVERTISE); ++ if ((data & ADVERTISE_10FULL) || ++ (data & ADVERTISE_100FULL)) ++ np->full_duplex = 1; ++ else ++ np->full_duplex = 0; ++} ++ ++static void ++broadcom_check_speed(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG); ++ np->current_speed = (data & MDIO_BC_SPEED ? 100 : 10); ++} ++ ++static void ++broadcom_check_duplex(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_AUX_CTRL_STATUS_REG); ++ np->full_duplex = (data & MDIO_BC_FULL_DUPLEX_IND) ? 1 : 0; ++} ++ ++static void ++tdk_check_speed(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG); ++ np->current_speed = (data & MDIO_TDK_DIAGNOSTIC_RATE ? 100 : 10); ++} ++ ++static void ++tdk_check_duplex(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_TDK_DIAGNOSTIC_REG); ++ np->full_duplex = (data & MDIO_TDK_DIAGNOSTIC_DPLX) ? 1 : 0; ++ ++} ++ ++static void ++intel_check_speed(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2); ++ np->current_speed = (data & MDIO_INT_SPEED ? 100 : 10); ++} ++ ++static void ++intel_check_duplex(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_INT_STATUS_REG_2); ++ np->full_duplex = (data & MDIO_INT_FULL_DUPLEX_IND) ? 1 : 0; ++} ++ ++static void ++national_check_speed(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG); ++ if (data & MDIO_NAT_1000) ++ np->current_speed = 1000; ++ else if (data & MDIO_NAT_100) ++ np->current_speed = 100; ++ else ++ np->current_speed = 10; ++} ++ ++static void ++national_check_duplex(struct net_device *dev) ++{ ++ unsigned long data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MDIO_NAT_LINK_AN_REG); ++ if (data & MDIO_NAT_FULL_DUPLEX_IND) ++ np->full_duplex = 1; ++ else ++ np->full_duplex = 0; ++} ++ ++static void ++crisv32_eth_reset_tranceiver(struct net_device *dev) ++{ ++ int i; ++ unsigned short cmd; ++ unsigned short data; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR); ++ ++ cmd = (MDIO_START << 14) ++ | (MDIO_WRITE << 12) ++ | (np->mdio_phy_addr << 7) ++ | (MII_BMCR << 2); ++ ++ crisv32_eth_send_mdio_cmd(dev, cmd, 1); ++ ++ data |= 0x8000; ++ ++ /* Magic value is number of bits. */ ++ for (i = 15; i >= 0; i--) ++ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data)); ++} ++ ++static unsigned short ++crisv32_eth_get_mdio_reg(struct net_device *dev, unsigned char reg_num) ++{ ++ int i; ++ unsigned short cmd; /* Data to be sent on MDIO port. */ ++ unsigned short data; /* Data read from MDIO. */ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ /* Start of frame, OP Code, Physical Address, Register Address. */ ++ cmd = (MDIO_START << 14) ++ | (MDIO_READ << 12) ++ | (np->mdio_phy_addr << 7) ++ | (reg_num << 2); ++ ++ crisv32_eth_send_mdio_cmd(dev, cmd, 0); ++ ++ data = 0; ++ ++ /* Receive data. Magic value is number of bits. */ ++ for (i = 15; i >= 0; i--) ++ data |= (crisv32_eth_receive_mdio_bit(dev) << i); ++ ++ return data; ++} ++ ++static void ++crisv32_eth_set_mdio_reg(struct net_device *dev, unsigned char reg, int value) ++{ ++ int bitCounter; ++ unsigned short cmd; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ cmd = (MDIO_START << 14) ++ | (MDIO_WRITE << 12) ++ | (np->mdio_phy_addr << 7) ++ | (reg << 2); ++ ++ crisv32_eth_send_mdio_cmd(dev, cmd, 1); ++ ++ /* Data... */ ++ for (bitCounter=15; bitCounter>=0 ; bitCounter--) { ++ crisv32_eth_send_mdio_bit(dev, GET_BIT(bitCounter, value)); ++ } ++} ++ ++static void ++crisv32_eth_send_mdio_cmd(struct net_device *dev, unsigned short cmd, ++ int write_cmd) ++{ ++ int i; ++ unsigned char data = 0x2; ++ ++ /* Preamble. Magic value is number of bits. */ ++ for (i = 31; i >= 0; i--) ++ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, MDIO_PREAMBLE)); ++ ++ for (i = 15; i >= 2; i--) ++ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, cmd)); ++ ++ /* Turnaround. */ ++ for (i = 1; i >= 0; i--) ++ if (write_cmd) ++ crisv32_eth_send_mdio_bit(dev, GET_BIT(i, data)); ++ else ++ crisv32_eth_receive_mdio_bit(dev); ++} ++ ++static void ++crisv32_eth_send_mdio_bit(struct net_device *dev, unsigned char bit) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ reg_eth_rw_mgm_ctrl mgm_ctrl = { ++ .mdoe = regk_eth_yes, ++ .mdio = bit & 1 ++ }; ++ ++ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); ++ ++ udelay(1); ++ ++ mgm_ctrl.mdc = 1; ++ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); ++ ++ udelay(1); ++} ++ ++static unsigned char ++crisv32_eth_receive_mdio_bit(struct net_device *dev) ++{ ++ reg_eth_r_stat stat; ++ reg_eth_rw_mgm_ctrl mgm_ctrl = {0}; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ ++ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); ++ stat = REG_RD(eth, np->eth_inst, r_stat); ++ ++ udelay(1); ++ ++ mgm_ctrl.mdc = 1; ++ REG_WR(eth, np->eth_inst, rw_mgm_ctrl, mgm_ctrl); ++ ++ udelay(1); ++ return stat.mdio; ++} ++ ++static void ++crisv32_clear_network_leds(unsigned long priv) ++{ ++ struct net_device *dev = (struct net_device*)priv; ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&np->leds->led_lock, flags); ++ if (np->leds->led_active && time_after(jiffies, np->leds->led_next_time)) { ++ crisv32_set_network_leds(LED_NOACTIVITY, dev); ++ ++ /* Set the earliest time we may set the LED */ ++ np->leds->led_next_time = jiffies + NET_FLASH_PAUSE; ++ np->leds->led_active = 0; ++ } ++ spin_unlock_irqrestore(&np->leds->led_lock, flags); ++} ++ ++static void ++crisv32_set_network_leds(int active, struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ int light_leds = 0; ++ ++ if (np->leds->ledgrp == LED_GRP_NONE) ++ return; ++ ++ if (active == LED_NOLINK) { ++ if (dev == crisv32_dev[0]) ++ np->leds->ifisup[0] = 0; ++ else ++ np->leds->ifisup[1] = 0; ++ } ++ else if (active == LED_LINK) { ++ if (dev == crisv32_dev[0]) ++ np->leds->ifisup[0] = 1; ++ else ++ np->leds->ifisup[1] = 1; ++#if defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK) ++ light_leds = 1; ++ } else { ++ light_leds = (active == LED_NOACTIVITY); ++#elif defined(CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY) ++ light_leds = 0; ++ } else { ++ light_leds = (active == LED_ACTIVITY); ++#else ++#error "Define either CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK or CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY" ++#endif ++ } ++ ++ if (!use_network_leds) { ++ NET_LED_SET(np->leds->ledgrp,LED_OFF); ++ return; ++ } ++ ++ if (!np->current_speed) { ++ /* Set link down if none of the interfaces that use this led group is up */ ++ if ((np->leds->ifisup[0] + np->leds->ifisup[1]) == 0) { ++#if defined(CONFIG_ETRAX_NETWORK_RED_ON_NO_CONNECTION) ++ /* Make LED red, link is down */ ++ NET_LED_SET(np->leds->ledgrp,LED_RED); ++#else ++ NET_LED_SET(np->leds->ledgrp,LED_OFF); ++#endif ++ } ++ } ++ else if (light_leds) { ++ if (np->current_speed == 10) { ++ NET_LED_SET(np->leds->ledgrp,LED_ORANGE); ++ } else { ++ NET_LED_SET(np->leds->ledgrp,LED_GREEN); ++ } ++ } ++ else { ++ NET_LED_SET(np->leds->ledgrp,LED_OFF); ++ } ++} ++ ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void ++crisv32_netpoll(struct net_device* netdev) ++{ ++ crisv32rx_eth_interrupt(DMA0_INTR_VECT, netdev, NULL); ++} ++#endif ++ ++#ifdef CONFIG_CPU_FREQ ++static int ++crisv32_ethernet_freq_notifier(struct notifier_block *nb, ++ unsigned long val, void *data) ++{ ++ struct cpufreq_freqs *freqs = data; ++ if (val == CPUFREQ_POSTCHANGE) { ++ int i; ++ for (i = 0; i < 2; i++) { ++ struct net_device* dev = crisv32_dev[i]; ++ unsigned short data; ++ if (dev == NULL) ++ continue; ++ ++ data = crisv32_eth_get_mdio_reg(dev, MII_BMCR); ++ if (freqs->new == 200000) ++ data &= ~BMCR_PDOWN; ++ else ++ data |= BMCR_PDOWN; ++ crisv32_eth_set_mdio_reg(dev, MII_BMCR, data); ++ } ++ } ++ return 0; ++} ++#endif ++ ++/* ++ * Must be called with the np->lock held. ++ */ ++static void crisv32_ethernet_bug(struct net_device *dev) ++{ ++ struct crisv32_ethernet_local *np = netdev_priv(dev); ++ dma_descr_data *dma_pos; ++ dma_descr_data *in_dma_pos; ++ reg_dma_rw_stat stat = {0}; ++ reg_dma_rw_stat in_stat = {0}; ++ int i; ++ ++ /* Get the current output dma position. */ ++ stat = REG_RD(dma, np->dma_out_inst, rw_stat); ++ dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_out_inst, rw_data)); ++ in_stat = REG_RD(dma, np->dma_in_inst, rw_stat); ++ in_dma_pos = phys_to_virt(REG_RD_INT(dma, np->dma_in_inst, rw_data)); ++ ++ printk("%s:\n" ++ "stat.list_state=%x\n" ++ "stat.mode=%x\n" ++ "stat.stream_cmd_src=%x\n" ++ "dma_pos=%x\n" ++ "in_stat.list_state=%x\n" ++ "in_stat.mode=%x\n" ++ "in_stat.stream_cmd_src=%x\n" ++ "in_dma_pos=%x\n" ++ "catch=%x active=%x\n" ++ "packets=%d queue=%d\n" ++ "intr_vect.r_vect=%x\n" ++ "dma.r_masked_intr=%x dma.rw_ack_intr=%x " ++ "dma.r_intr=%x dma.rw_intr_masked=%x\n" ++ "eth.r_stat=%x\n", ++ __func__, ++ stat.list_state, stat.mode, stat.stream_cmd_src, ++ (unsigned int)dma_pos, ++ in_stat.list_state, in_stat.mode, in_stat.stream_cmd_src, ++ (unsigned int)in_dma_pos, ++ (unsigned int)&np->catch_tx_desc->descr, ++ (unsigned int)&np->active_tx_desc->descr, ++ np->txpackets, ++ netif_queue_stopped(dev), ++ REG_RD_INT(intr_vect, regi_irq, r_vect), ++ REG_RD_INT(dma, np->dma_out_inst, r_masked_intr), ++ REG_RD_INT(dma, np->dma_out_inst, rw_ack_intr), ++ REG_RD_INT(dma, np->dma_out_inst, r_intr), ++ REG_RD_INT(dma, np->dma_out_inst, rw_intr_mask), ++ REG_RD_INT(eth, np->eth_inst, r_stat)); ++ ++ printk("tx-descriptors:\n"); ++ for (i = 0; i < NBR_TX_DESC; i++) { ++ printk("txdesc[%d]=0x%x\n", i, (unsigned int) ++ virt_to_phys(&np->dma_tx_descr_list[i].descr)); ++ printk("txdesc[%d].skb=0x%x\n", i, ++ (unsigned int)np->dma_tx_descr_list[i].skb); ++ printk("txdesc[%d].buf=0x%x\n", i, ++ (unsigned int)np->dma_tx_descr_list[i].descr.buf); ++ printk("txdesc[%d].after=0x%x\n", i, ++ (unsigned int)np->dma_tx_descr_list[i].descr.after); ++ printk("txdesc[%d].intr=%x\n", i, ++ np->dma_tx_descr_list[i].descr.intr); ++ printk("txdesc[%d].eol=%x\n", i, ++ np->dma_tx_descr_list[i].descr.eol); ++ printk("txdesc[%d].out_eop=%x\n", i, ++ np->dma_tx_descr_list[i].descr.out_eop); ++ printk("txdesc[%d].wait=%x\n", i, ++ np->dma_tx_descr_list[i].descr.wait); ++ } ++} ++ ++ ++static int ++crisv32_init_module(void) ++{ ++ return crisv32_ethernet_init(); ++} ++ ++module_init(crisv32_init_module); +diff -urN linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h +--- linux-2.6.19.2.orig/drivers/net/cris/eth_v32.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/drivers/net/cris/eth_v32.h 2007-02-06 11:10:37.000000000 +0100 +@@ -0,0 +1,248 @@ ++/* ++ * Definitions for ETRAX FS ethernet driver. ++ * ++ * Copyright (C) 2003, 2004, 2005 Axis Communications. ++ */ ++ ++#ifndef _ETRAX_ETHERNET_H_ ++#define _ETRAX_ETHERNET_H_ ++ ++#include <asm/arch/hwregs/dma.h> ++ ++ ++#define MAX_MEDIA_DATA_SIZE 1522 /* Max packet size. */ ++ ++#define NBR_RX_DESC 64 /* Number of RX descriptors. */ ++#define NBR_TX_DESC 16 /* Number of TX descriptors. */ ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++#define NBR_INTMEM_RX_DESC 5 /* Number of RX descriptors in int. mem. ++ * when running in gigabit mode. ++ * Should be less then NBR_RX_DESC ++ */ ++#define NBR_INTMEM_TX_BUF 4 /* Number of TX buffers in int. mem ++ * when running in gigabit mode. ++ * Should be less than NBR_TX_DESC ++ */ ++#endif ++ ++/* Large packets are sent directly to upper layers while small packets ++ * are copied (to reduce memory waste). The following constant ++ * decides the breakpoint. ++ */ ++#define RX_COPYBREAK (256) ++ ++#define ETHER_HEAD_LEN (14) ++ ++/* ++** MDIO constants. ++*/ ++#define MDIO_START 0x1 ++#define MDIO_READ 0x2 ++#define MDIO_WRITE 0x1 ++#define MDIO_PREAMBLE 0xfffffffful ++ ++/* Broadcom specific */ ++#define MDIO_AUX_CTRL_STATUS_REG 0x18 ++#define MDIO_BC_FULL_DUPLEX_IND 0x1 ++#define MDIO_BC_SPEED 0x2 ++ ++/* TDK specific */ ++#define MDIO_TDK_DIAGNOSTIC_REG 18 ++#define MDIO_TDK_DIAGNOSTIC_RATE 0x400 ++#define MDIO_TDK_DIAGNOSTIC_DPLX 0x800 ++ ++/*Intel LXT972A specific*/ ++#define MDIO_INT_STATUS_REG_2 0x0011 ++#define MDIO_INT_FULL_DUPLEX_IND ( 0x0001 << 9 ) ++#define MDIO_INT_SPEED ( 0x0001 << 14 ) ++ ++/*National Semiconductor DP83865 specific*/ ++#define MDIO_NAT_LINK_AN_REG 0x11 ++#define MDIO_NAT_1000 (0x0001 << 4) ++#define MDIO_NAT_100 (0x0001 << 3) ++#define MDIO_NAT_FULL_DUPLEX_IND (0x0001 << 1) ++ ++/* Network flash constants */ ++#define NET_FLASH_TIME (HZ/50) /* 20 ms */ ++#define NET_FLASH_PAUSE (HZ/100) /* 10 ms */ ++#define NET_LINK_UP_CHECK_INTERVAL (2*HZ) /* 2 seconds. */ ++#define NET_DUPLEX_CHECK_INTERVAL (2*HZ) /* 2 seconds. */ ++ ++/* Duplex settings. */ ++enum duplex { ++ half, ++ full, ++ autoneg ++}; ++ ++/* Some transceivers requires special handling. */ ++struct transceiver_ops { ++ unsigned int oui; ++ void (*check_speed) (struct net_device * dev); ++ void (*check_duplex) (struct net_device * dev); ++}; ++ ++typedef struct crisv32_eth_descr { ++ dma_descr_data descr __attribute__ ((__aligned__(32))); ++ struct sk_buff *skb; ++ unsigned char *linearized_packet; ++} crisv32_eth_descr; ++ ++ ++ ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++struct tx_buffer_list { ++ struct tx_buffer_list *next; ++ unsigned char *buf; ++ char free; ++}; ++#endif ++ ++/* LED stuff */ ++#define LED_GRP_0 0 ++#define LED_GRP_1 1 ++#define LED_GRP_NONE 2 ++ ++#define LED_ACTIVITY 0 ++#define LED_NOACTIVITY 1 ++#define LED_LINK 2 ++#define LED_NOLINK 3 ++ ++struct crisv32_eth_leds { ++ unsigned int ledgrp; ++ int led_active; ++ unsigned long led_next_time; ++ struct timer_list clear_led_timer; ++ spinlock_t led_lock; /* Protect LED state */ ++ int ifisup[2]; ++}; ++ ++#define NET_LED_SET(x,y) \ ++ do { \ ++ if (x == 0) LED_NETWORK_GRP0_SET(y); \ ++ if (x == 1) LED_NETWORK_GRP1_SET(y); \ ++ } while (0) ++ ++/* Information that need to be kept for each device. */ ++struct crisv32_ethernet_local { ++ dma_descr_context ctxt_in __attribute__ ((__aligned__(32))); ++ dma_descr_context ctxt_out __attribute__ ((__aligned__(32))); ++ ++ crisv32_eth_descr *active_rx_desc; ++ crisv32_eth_descr *prev_rx_desc; ++ crisv32_eth_descr *last_rx_desc; ++ ++ crisv32_eth_descr *active_tx_desc; ++ crisv32_eth_descr *prev_tx_desc; ++ crisv32_eth_descr *catch_tx_desc; ++ ++ crisv32_eth_descr dma_rx_descr_list[NBR_RX_DESC]; ++ crisv32_eth_descr dma_tx_descr_list[NBR_TX_DESC]; ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++ struct tx_buffer_list tx_intmem_buf_list[NBR_INTMEM_TX_BUF]; ++ struct tx_buffer_list *intmem_tx_buf_active; ++ struct tx_buffer_list *intmem_tx_buf_catch; ++ char gigabit_mode; ++#endif ++ char new_rx_package; ++ ++ /* DMA and ethernet registers for the device. */ ++ int eth_inst; ++ int dma_in_inst; ++ int dma_out_inst; ++ ++ /* Network speed indication. */ ++ struct timer_list speed_timer; ++ int current_speed; /* Speed read from tranceiver */ ++ int current_speed_selection; /* Speed selected by user */ ++ int sender_started; ++ int txpackets; ++ ++ struct crisv32_eth_leds *leds; ++ ++ /* Duplex. */ ++ struct timer_list duplex_timer; ++ int full_duplex; ++ enum duplex current_duplex; ++ ++ struct net_device_stats stats; ++ ++ /* Transciever address. */ ++ unsigned int mdio_phy_addr; ++ ++ struct transceiver_ops *transceiver; ++ ++ /* ++ * TX control lock. This protects the transmit buffer ring state along ++ * with the "tx full" state of the driver. This means all netif_queue ++ * flow control actions are protected by this lock as well. ++ */ ++ spinlock_t lock; ++ spinlock_t transceiver_lock; /* Protect transceiver state. */ ++}; ++ ++/* Function prototypes. */ ++static int crisv32_ethernet_init(void); ++static int crisv32_ethernet_device_init(struct net_device* dev); ++static int crisv32_eth_open(struct net_device *dev); ++static int crisv32_eth_close(struct net_device *dev); ++static int crisv32_eth_set_mac_address(struct net_device *dev, void *vpntr); ++static irqreturn_t crisv32rx_eth_interrupt(int irq, void *dev_id); ++static irqreturn_t crisv32tx_eth_interrupt(int irq, void *dev_id); ++static irqreturn_t crisv32nw_eth_interrupt(int irq, void *dev_id); ++static void crisv32_eth_receive_packet(struct net_device *dev); ++static int crisv32_eth_send_packet(struct sk_buff *skb, struct net_device *dev); ++static void crisv32_eth_hw_send_packet(unsigned char *buf, int length, ++ void *priv); ++static void crisv32_eth_tx_timeout(struct net_device *dev); ++static void crisv32_eth_set_multicast_list(struct net_device *dev); ++static int crisv32_eth_ioctl(struct net_device *dev, struct ifreq *ifr, ++ int cmd); ++static int crisv32_eth_set_config(struct net_device* dev, struct ifmap* map); ++#ifdef CONFIG_CRIS_MACH_ARTPEC3 ++static void crisv32_eth_switch_intmem_usage(struct net_device *dev); ++#endif ++static void crisv32_eth_negotiate(struct net_device *dev); ++static void crisv32_eth_check_speed(unsigned long idev); ++static void crisv32_eth_set_speed(struct net_device *dev, unsigned long speed); ++static void crisv32_eth_check_duplex(unsigned long idev); ++static void crisv32_eth_set_duplex(struct net_device *dev, enum duplex); ++static int crisv32_eth_probe_transceiver(struct net_device *dev); ++ ++static struct ethtool_ops crisv32_ethtool_ops; ++ ++static void generic_check_speed(struct net_device *dev); ++static void generic_check_duplex(struct net_device *dev); ++static void broadcom_check_speed(struct net_device *dev); ++static void broadcom_check_duplex(struct net_device *dev); ++static void tdk_check_speed(struct net_device *dev); ++static void tdk_check_duplex(struct net_device *dev); ++static void intel_check_speed(struct net_device* dev); ++static void intel_check_duplex(struct net_device *dev); ++static void national_check_speed(struct net_device* dev); ++static void national_check_duplex(struct net_device *dev); ++ ++#ifdef CONFIG_NET_POLL_CONTROLLER ++static void crisv32_netpoll(struct net_device* dev); ++#endif ++ ++static void crisv32_clear_network_leds(unsigned long dummy); ++static void crisv32_set_network_leds(int active, struct net_device* dev); ++ ++static void crisv32_eth_reset_tranceiver(struct net_device *dev); ++static unsigned short crisv32_eth_get_mdio_reg(struct net_device *dev, ++ unsigned char reg_num); ++static void crisv32_eth_set_mdio_reg(struct net_device *dev, ++ unsigned char reg_num, ++ int val); ++static void crisv32_eth_send_mdio_cmd(struct net_device *dev, ++ unsigned short cmd, int write_cmd); ++static void crisv32_eth_send_mdio_bit(struct net_device *dev, ++ unsigned char bit); ++static unsigned char crisv32_eth_receive_mdio_bit(struct net_device *dev); ++ ++static struct net_device_stats *crisv32_get_stats(struct net_device *dev); ++static void crisv32_start_dma_out(struct crisv32_ethernet_local* np); ++ ++ ++#endif /* _ETRAX_ETHERNET_H_ */ diff --git a/target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch b/target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch new file mode 100644 index 0000000000..c6feeebf7b --- /dev/null +++ b/target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch @@ -0,0 +1,21 @@ +--- linux-2.6.19.2.old/kernel/Kconfig.sched 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2.dev/kernel/Kconfig.sched 2007-02-05 12:22:39.000000000 +0100 +@@ -0,0 +1,18 @@ ++# ++# Scheduler tuning ++# ++ ++config OVERRIDE_SCHED_STARVATION_LIMIT ++ bool "Override scheduler STARVATION_LIMIT" ++ help ++ This threshold sets the maximum time a task may wait in the ++ expired runqueue when deciding to re-insert interactive tasks ++ into the active runqueue. The time-limit is in ms but scales with ++ the number of running tasks in the system. ++ ++config SCHED_STARVATION_LIMIT ++ int "Scheduler Starvation Limit" ++ depends on OVERRIDE_SCHED_STARVATION_LIMIT ++ default 10 ++ help ++ Starvation limit in milliseconds per running task. diff --git a/target/linux/etrax/patches/cris/005-loader.patch b/target/linux/etrax/patches/cris/005-loader.patch new file mode 100644 index 0000000000..bf35bd8aa0 --- /dev/null +++ b/target/linux/etrax/patches/cris/005-loader.patch @@ -0,0 +1,60 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile 2007-05-19 14:31:06.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile 2007-05-19 14:32:24.000000000 +0200 +@@ -2,7 +2,7 @@ + # arch/cris/arch-v10/boot/Makefile + # + +-OBJCOPY = objcopy-cris ++OBJCOPY = /usr/local/cris/objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss + + subdir- := compressed rescue +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-19 14:31:06.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-19 14:33:45.000000000 +0200 +@@ -4,10 +4,10 @@ + + CC = gcc-cris -melf $(LINUXINCLUDE) + CFLAGS = -O2 +-LD = ld-cris ++LD = /usr/local/cris/ld-cris + LDFLAGS = -T $(obj)/decompress.ld + OBJECTS = $(obj)/head.o $(obj)/misc.o +-OBJCOPY = objcopy-cris ++OBJCOPY = /usr/local/cris/objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss + + quiet_cmd_image = BUILD $@ +@@ -22,10 +22,10 @@ + $(call if_changed,objcopy) + + $(obj)/head.o: $(obj)/head.S .config +- @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@ ++ /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@ + + $(obj)/misc.o: $(obj)/misc.c .config +- @$(CC) -D__KERNEL__ -c $< -o $@ ++ /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@ + + $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE + $(call if_changed,image) +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/rescue/Makefile +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/rescue/Makefile 2007-05-19 14:31:06.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/rescue/Makefile 2007-05-19 14:34:25.000000000 +0200 +@@ -2,12 +2,12 @@ + # Makefile for rescue (bootstrap) code + # + +-CC = gcc-cris -mlinux $(LINUXINCLUDE) ++CC = /usr/local/cris/gcc-cris -mlinux $(LINUXINCLUDE) + CFLAGS = -O2 + AFLAGS = -traditional +-LD = gcc-cris -mlinux -nostdlib ++LD = /usr/local/cris/gcc-cris -mlinux -nostdlib + LDFLAGS = -T $(obj)/rescue.ld +-OBJCOPY = objcopy-cris ++OBJCOPY = /usr/local/cris/objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss + obj-y = head.o + OBJECT = $(obj)/$(obj-y) diff --git a/target/linux/etrax/patches/cris/006-gcc-4.patch b/target/linux/etrax/patches/cris/006-gcc-4.patch new file mode 100644 index 0000000000..a957632e2f --- /dev/null +++ b/target/linux/etrax/patches/cris/006-gcc-4.patch @@ -0,0 +1,705 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/lib/memset.c linux-2.6.19.2/arch/cris/arch-v10/lib/memset.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/lib/memset.c 2007-06-03 13:59:39.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/lib/memset.c 2007-06-03 14:11:43.000000000 +0200 +@@ -110,45 +110,28 @@ + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r12=r12, r11=r11" */ +- __asm__ volatile (" +- ;; Check that the following is true (same register names on +- ;; both sides of equal sign, as in r8=r8): +- ;; %0=r13, %1=r12, %4=r11 +- ;; +- ;; Save the registers we'll clobber in the movem process +- ;; on the stack. Don't mention them to gcc, it will only be +- ;; upset. +- subq 11*4,$sp +- movem $r10,[$sp] +- +- move.d $r11,$r0 +- move.d $r11,$r1 +- move.d $r11,$r2 +- move.d $r11,$r3 +- move.d $r11,$r4 +- move.d $r11,$r5 +- move.d $r11,$r6 +- move.d $r11,$r7 +- move.d $r11,$r8 +- move.d $r11,$r9 +- move.d $r11,$r10 +- +- ;; Now we've got this: +- ;; r13 - dst +- ;; r12 - n ++ __asm__ volatile ( ++ "subq 11*4,$sp\n\t" ++ "movem $r10,[$sp]\n\t" ++ "move.d $r11,$r0\n\t" ++ "move.d $r11,$r1\n\t" ++ "move.d $r11,$r2\n\t" ++ "move.d $r11,$r3\n\t" ++ "move.d $r11,$r4\n\t" ++ "move.d $r11,$r5\n\t" ++ "move.d $r11,$r6\n\t" ++ "move.d $r11,$r7\n\t" ++ "move.d $r11,$r8\n\t" ++ "move.d $r11,$r9\n\t" ++ "move.d $r11,$r10\n\t" ++ "subq 12*4,$r12\n\t" ++"0:\n\t" ++ "subq 12*4,$r12\n\t" ++ "bge 0b\n\t" ++ "movem $r11,[$r13+]\n\t" ++ "addq 12*4,$r12\n\t" ++ "movem [$sp+],$r10" + +- ;; Update n for the first loop +- subq 12*4,$r12 +-0: +- subq 12*4,$r12 +- bge 0b +- movem $r11,[$r13+] +- +- addq 12*4,$r12 ;; compensate for last loop underflowing n +- +- ;; Restore registers from stack +- movem [$sp+],$r10" +- + /* Outputs */ : "=r" (dst), "=r" (n) + /* Inputs */ : "0" (dst), "1" (n), "r" (lc)); + +@@ -161,10 +144,14 @@ + + while ( n >= 16 ) + { +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + n -= 16; + } + +@@ -182,67 +169,95 @@ + *(short*)dst = (short) lc; + break; + case 3: +- *((short*)dst)++ = (short) lc; ++ *((short*)dst) = (short) lc; ++ dst+=2; + *(char*)dst = (char) lc; + break; + case 4: +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; + break; + case 5: +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; + *(char*)dst = (char) lc; + break; + case 6: +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; + *(short*)dst = (short) lc; + break; + case 7: +- *((long*)dst)++ = lc; +- *((short*)dst)++ = (short) lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((short*)dst) = (short) lc; ++ dst+=2; + *(char*)dst = (char) lc; + break; + case 8: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + break; + case 9: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + *(char*)dst = (char) lc; + break; + case 10: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + *(short*)dst = (short) lc; + break; + case 11: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((short*)dst)++ = (short) lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((short*)dst) = (short) lc; ++ dst+=2; + *(char*)dst = (char) lc; + break; + case 12: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + break; + case 13: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + *(char*)dst = (char) lc; + break; + case 14: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; + *(short*)dst = (short) lc; + break; + case 15: +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((long*)dst)++ = lc; +- *((short*)dst)++ = (short) lc; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((long*)dst) = lc; ++ dst+=4; ++ *((short*)dst) = (short) lc; ++ dst+=2; + *(char*)dst = (char) lc; + break; + } +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/lib/string.c linux-2.6.19.2/arch/cris/arch-v10/lib/string.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/lib/string.c 2007-06-03 13:59:39.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/lib/string.c 2007-06-03 14:21:02.000000000 +0200 +@@ -95,37 +95,19 @@ + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r11=r11, r12=r12" */ +- __asm__ volatile (" +- ;; Check that the following is true (same register names on +- ;; both sides of equal sign, as in r8=r8): +- ;; %0=r13, %1=r11, %2=r12 +- ;; +- ;; Save the registers we'll use in the movem process +- ;; on the stack. +- subq 11*4,$sp +- movem $r10,[$sp] +- +- ;; Now we've got this: +- ;; r11 - src +- ;; r13 - dst +- ;; r12 - n +- +- ;; Update n for the first loop +- subq 44,$r12 +-0: +- movem [$r11+],$r10 +- subq 44,$r12 +- bge 0b +- movem $r10,[$r13+] +- +- addq 44,$r12 ;; compensate for last loop underflowing n +- +- ;; Restore registers from stack +- movem [$sp+],$r10" +- ++ __asm__ volatile ( ++ "subq 11*4,$sp\n\t" ++ "movem $r10,[$sp]\n\t" ++ "subq 44,$r12\n\t" ++"0:\n\t" ++ "movem [$r11+],$r10\n\t" ++ "subq 44,$r12\n\t" ++ "bge 0b\n\t" ++ "movem $r10,[$r13+]\n\t" ++ "addq 44,$r12\n\t" ++ "movem [$sp+],$r10\n\t" + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) + /* Inputs */ : "0" (dst), "1" (src), "2" (n)); +- + } + + /* Either we directly starts copying, using dword copying +@@ -135,10 +117,14 @@ + + while ( n >= 16 ) + { +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + n -= 16; + } + +@@ -156,67 +142,95 @@ + *(short*)dst = *(short*)src; + break; + case 3: +- *((short*)dst)++ = *((short*)src)++; ++ *((short*)dst) = *((short*)src); ++ src+=2;dst+=2; + *(char*)dst = *(char*)src; + break; + case 4: +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + break; + case 5: +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + *(char*)dst = *(char*)src; + break; + case 6: +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + *(short*)dst = *(short*)src; + break; + case 7: +- *((long*)dst)++ = *((long*)src)++; +- *((short*)dst)++ = *((short*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((short*)dst) = *((short*)src); ++ src+=2;dst+=2; + *(char*)dst = *(char*)src; + break; + case 8: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + break; + case 9: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + *(char*)dst = *(char*)src; + break; + case 10: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + *(short*)dst = *(short*)src; + break; + case 11: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((short*)dst)++ = *((short*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((short*)dst) = *((short*)src); ++ src+=2;dst+=2; + *(char*)dst = *(char*)src; + break; + case 12: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + break; + case 13: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + *(char*)dst = *(char*)src; + break; + case 14: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; + *(short*)dst = *(short*)src; + break; + case 15: +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((long*)dst)++ = *((long*)src)++; +- *((short*)dst)++ = *((short*)src)++; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((long*)dst) = *((long*)src); ++ src+=4;dst+=4; ++ *((short*)dst) = *((short*)src); ++ src+=2;dst+=2; + *(char*)dst = *(char*)src; + break; + } +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/lib/usercopy.c linux-2.6.19.2/arch/cris/arch-v10/lib/usercopy.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/lib/usercopy.c 2007-06-03 13:59:39.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/lib/usercopy.c 2007-06-03 14:25:55.000000000 +0200 +@@ -88,63 +88,38 @@ + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r11=r11, r12=r12". */ +- __asm__ volatile ("\ +- .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ +- .err \n\ +- .endif \n\ +- +- ;; Save the registers we'll use in the movem process +- ;; on the stack. +- subq 11*4,$sp +- movem $r10,[$sp] +- +- ;; Now we've got this: +- ;; r11 - src +- ;; r13 - dst +- ;; r12 - n +- +- ;; Update n for the first loop +- subq 44,$r12 +- +-; Since the noted PC of a faulting instruction in a delay-slot of a taken +-; branch, is that of the branch target, we actually point at the from-movem +-; for this case. There is no ambiguity here; if there was a fault in that +-; instruction (meaning a kernel oops), the faulted PC would be the address +-; after *that* movem. +- +-0: +- movem [$r11+],$r10 +- subq 44,$r12 +- bge 0b +- movem $r10,[$r13+] +-1: +- addq 44,$r12 ;; compensate for last loop underflowing n +- +- ;; Restore registers from stack +- movem [$sp+],$r10 +-2: +- .section .fixup,\"ax\" +- +-; To provide a correct count in r10 of bytes that failed to be copied, +-; we jump back into the loop if the loop-branch was taken. There is no +-; performance penalty for sany use; the program will segfault soon enough. +- +-3: +- move.d [$sp],$r10 +- addq 44,$r10 +- move.d $r10,[$sp] +- jump 0b +-4: +- movem [$sp+],$r10 +- addq 44,$r10 +- addq 44,$r12 +- jump 2b +- +- .previous +- .section __ex_table,\"a\" +- .dword 0b,3b +- .dword 1b,4b +- .previous" ++ __asm__ volatile ( ++ ".ifnc %0%1%2%3,$r13$r11$r12$r10 \n\t" ++ ".err \n\t" ++ ".endif \n\t" ++ "subq 11*4,$sp\n\t" ++ "movem $r10,[$sp]\n\t" ++ "subq 44,$r12\n\t" ++ "0:\n\t" ++ "movem [$r11+],$r10\n\t" ++ "subq 44,$r12\n\t" ++ "bge 0b\n\t" ++ "movem $r10,[$r13+]\n\t" ++ "1:\n\t" ++ "addq 44,$r12 \n\t" ++ "movem [$sp+],$r10\n\t" ++ "2:\n\t" ++ ".section .fixup,\"ax\"\n\t" ++ "3:\n\t" ++ "move.d [$sp],$r10\n\t" ++ "addq 44,$r10\n\t" ++ "move.d $r10,[$sp]\n\t" ++ "jump 0b\n\t" ++ "4:\n\t" ++ "movem [$sp+],$r10\n\t" ++ "addq 44,$r10\n\t" ++ "addq 44,$r12\n\t" ++ "jump 2b\n\t" ++ ".previous\n\t" ++ ".section __ex_table,\"a\"\n\t" ++ ".dword 0b,3b\n\t" ++ ".dword 1b,4b\n\t" ++ ".previous\n\t" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); +@@ -253,60 +228,32 @@ + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + "r13=r13, r11=r11, r12=r12" */ +- __asm__ volatile (" +- .ifnc %0%1%2%3,$r13$r11$r12$r10 \n\ +- .err \n\ +- .endif \n\ +- +- ;; Save the registers we'll use in the movem process +- ;; on the stack. +- subq 11*4,$sp +- movem $r10,[$sp] +- +- ;; Now we've got this: +- ;; r11 - src +- ;; r13 - dst +- ;; r12 - n +- +- ;; Update n for the first loop +- subq 44,$r12 +-0: +- movem [$r11+],$r10 +-1: +- subq 44,$r12 +- bge 0b +- movem $r10,[$r13+] +- +- addq 44,$r12 ;; compensate for last loop underflowing n +- +- ;; Restore registers from stack +- movem [$sp+],$r10 +-4: +- .section .fixup,\"ax\" +- +-;; Do not jump back into the loop if we fail. For some uses, we get a +-;; page fault somewhere on the line. Without checking for page limits, +-;; we don't know where, but we need to copy accurately and keep an +-;; accurate count; not just clear the whole line. To do that, we fall +-;; down in the code below, proceeding with smaller amounts. It should +-;; be kept in mind that we have to cater to code like what at one time +-;; was in fs/super.c: +-;; i = size - copy_from_user((void *)page, data, size); +-;; which would cause repeated faults while clearing the remainder of +-;; the SIZE bytes at PAGE after the first fault. +-;; A caveat here is that we must not fall through from a failing page +-;; to a valid page. +- +-3: +- movem [$sp+],$r10 +- addq 44,$r12 ;; Get back count before faulting point. +- subq 44,$r11 ;; Get back pointer to faulting movem-line. +- jump 4b ;; Fall through, pretending the fault didn't happen. +- +- .previous +- .section __ex_table,\"a\" +- .dword 1b,3b +- .previous" ++ __asm__ volatile ( ++ ".ifnc %0%1%2%3,$r13$r11$r12$r10 \n\t" ++ ".err \n\t" ++ ".endif \n\t" ++ "subq 11*4,$sp\n\t" ++ "movem $r10,[$sp]\n\t" ++ "subq 44,$r12\n\t" ++ "0:\n\t" ++ "movem [$r11+],$r10\n\t" ++ "1:\n\t" ++ "subq 44,$r12\n\t" ++ "bge 0b\n\t" ++ "movem $r10,[$r13+]\n\t" ++ "addq 44,$r12 \n\t" ++ "movem [$sp+],$r10\n\t" ++ "4:\n\t" ++ ".section .fixup,\"ax\"\n\t" ++ "3:\n\t" ++ "movem [$sp+],$r10\n\t" ++ "addq 44,$r12\n\t" ++ "subq 44,$r11\n\t" ++ "jump 4b \n\t" ++ ".previous\n\t" ++ ".section __ex_table,\"a\"\n\t" ++ ".dword 1b,3b\n\t" ++ ".previous\n\t" + + /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (src), "2" (n), "3" (retn)); +@@ -425,66 +372,50 @@ + If you want to check that the allocation was right; then + check the equalities in the first comment. It should say + something like "r13=r13, r11=r11, r12=r12". */ +- __asm__ volatile (" +- .ifnc %0%1%2,$r13$r12$r10 \n\ +- .err \n\ +- .endif \n\ +- +- ;; Save the registers we'll clobber in the movem process +- ;; on the stack. Don't mention them to gcc, it will only be +- ;; upset. +- subq 11*4,$sp +- movem $r10,[$sp] +- +- clear.d $r0 +- clear.d $r1 +- clear.d $r2 +- clear.d $r3 +- clear.d $r4 +- clear.d $r5 +- clear.d $r6 +- clear.d $r7 +- clear.d $r8 +- clear.d $r9 +- clear.d $r10 +- clear.d $r11 +- +- ;; Now we've got this: +- ;; r13 - dst +- ;; r12 - n +- +- ;; Update n for the first loop +- subq 12*4,$r12 +-0: +- subq 12*4,$r12 +- bge 0b +- movem $r11,[$r13+] +-1: +- addq 12*4,$r12 ;; compensate for last loop underflowing n +- +- ;; Restore registers from stack +- movem [$sp+],$r10 +-2: +- .section .fixup,\"ax\" +-3: +- move.d [$sp],$r10 +- addq 12*4,$r10 +- move.d $r10,[$sp] +- clear.d $r10 +- jump 0b +- +-4: +- movem [$sp+],$r10 +- addq 12*4,$r10 +- addq 12*4,$r12 +- jump 2b +- +- .previous +- .section __ex_table,\"a\" +- .dword 0b,3b +- .dword 1b,4b +- .previous" +- ++ __asm__ volatile ( ++ ".ifnc %0%1%2,$r13$r12$r10\n\t" ++ ".err \n\t" ++ ".endif\n\t" ++ "subq 11*4,$sp\n\t" ++ "movem $r10,[$sp]\n\t" ++ "clear.d $r0\n\t" ++ "clear.d $r1\n\t" ++ "clear.d $r2\n\t" ++ "clear.d $r3\n\t" ++ "clear.d $r4\n\t" ++ "clear.d $r5\n\t" ++ "clear.d $r6\n\t" ++ "clear.d $r7\n\t" ++ "clear.d $r8\n\t" ++ "clear.d $r9\n\t" ++ "clear.d $r10\n\t" ++ "clear.d $r11\n\t" ++ "subq 12*4,$r12\n\t" ++ "0:\n\t" ++ "subq 12*4,$r12\n\t" ++ "bge 0b\n\t" ++ "movem $r11,[$r13+]\n\t" ++ "1: \n\t" ++ "addq 12*4,$r12 \n\t" ++ "movem [$sp+],$r10\n\t" ++ "2:\n\t" ++ ".section .fixup,\"ax\"\n\t" ++ "3:\n\t" ++ "move.d [$sp],$r10\n\t" ++ "addq 12*4,$r10\n\t" ++ "move.d $r10,[$sp]\n\t" ++ "clear.d $r10\n\t" ++ "jump 0b\n\t" ++ "4:\n\t" ++ "movem [$sp+],$r10\n\t" ++ "addq 12*4,$r10\n\t" ++ "addq 12*4,$r12\n\t" ++ "jump 2b\n\t" ++ ".previous\n\t" ++ ".section __ex_table,\"a\"\n\t" ++ ".dword 0b,3b\n\t" ++ ".dword 1b,4b\n\t" ++ ".previous\n\t" + /* Outputs */ : "=r" (dst), "=r" (n), "=r" (retn) + /* Inputs */ : "0" (dst), "1" (n), "2" (retn) + /* Clobber */ : "r11"); diff --git a/target/linux/etrax/patches/cris/007-nr_free_pages.patch b/target/linux/etrax/patches/cris/007-nr_free_pages.patch new file mode 100644 index 0000000000..235b000ded --- /dev/null +++ b/target/linux/etrax/patches/cris/007-nr_free_pages.patch @@ -0,0 +1,12 @@ +diff -urN linux-2.6.19.2.orig/mm/page_alloc.c linux-2.6.19.2/mm/page_alloc.c +--- linux-2.6.19.2.orig/mm/page_alloc.c 2007-05-20 03:26:41.000000000 +0200 ++++ linux-2.6.19.2/mm/page_alloc.c 2007-05-20 03:28:22.000000000 +0200 +@@ -1200,7 +1200,7 @@ + unsigned int nr_free_pages(void) + { + unsigned int sum = 0; +- struct zone *zone; ++ volatile struct zone *zone; + + for_each_zone(zone) + sum += zone->free_pages; diff --git a/target/linux/etrax/patches/cris/008-flashmap.patch b/target/linux/etrax/patches/cris/008-flashmap.patch new file mode 100644 index 0000000000..63ee023e08 --- /dev/null +++ b/target/linux/etrax/patches/cris/008-flashmap.patch @@ -0,0 +1,41 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-21 23:12:27.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-21 23:13:09.000000000 +0200 +@@ -256,7 +256,7 @@ + + /* If no partition-table was found, we use this default-set. */ + #define MAX_PARTITIONS 7 +-#define NUM_DEFAULT_PARTITIONS 3 ++#define NUM_DEFAULT_PARTITIONS 3 + + /* + * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the +@@ -265,19 +265,19 @@ + */ + static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = { + { +- .name = "boot firmware", +- .size = CONFIG_ETRAX_PTABLE_SECTOR, ++ .name = "kernel", ++ .size = 0x200000, + .offset = 0 + }, + { +- .name = "kernel", +- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR), +- .offset = CONFIG_ETRAX_PTABLE_SECTOR ++ .name = "filesystem", ++ .size = 0x200000, ++ .offset = 0x200000 + }, + { +- .name = "filesystem", +- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR, +- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR) ++ .name = "filesystem2", ++ .size = 0x400000, ++ .offset = 0x400000 + } + }; + +009-flashmap.patch diff --git a/target/linux/etrax/patches/cris/008a-flashmap.patch b/target/linux/etrax/patches/cris/008a-flashmap.patch new file mode 100644 index 0000000000..dfb5d08300 --- /dev/null +++ b/target/linux/etrax/patches/cris/008a-flashmap.patch @@ -0,0 +1,33 @@ +Binary files linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/.axisflashmap.c.swp and linux-2.6.19.2/arch/cris/arch-v10/drivers/.axisflashmap.c.swp differ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-28 01:40:09.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-28 01:41:29.000000000 +0200 +@@ -256,7 +256,7 @@ + + /* If no partition-table was found, we use this default-set. */ + #define MAX_PARTITIONS 7 +-#define NUM_DEFAULT_PARTITIONS 3 ++#define NUM_DEFAULT_PARTITIONS 2 + + /* + * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the +@@ -270,15 +270,10 @@ + .offset = 0 + }, + { +- .name = "filesystem", +- .size = 0x200000, ++ .name = "rootfs", ++ .size = 0x600000, + .offset = 0x200000 + }, +- { +- .name = "filesystem2", +- .size = 0x400000, +- .offset = 0x400000 +- } + }; + + /* Initialize the ones normally used. */ +Binary files linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.o and linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.o differ +Binary files linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/built-in.o and linux-2.6.19.2/arch/cris/arch-v10/drivers/built-in.o differ diff --git a/target/linux/etrax/patches/cris/009-sysfs.patch b/target/linux/etrax/patches/cris/009-sysfs.patch new file mode 100644 index 0000000000..4988a20fc3 --- /dev/null +++ b/target/linux/etrax/patches/cris/009-sysfs.patch @@ -0,0 +1,83 @@ +--- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-05-26 18:12:33.000000000 +0200 ++++ linux-2.6.19.2/drivers/serial/crisv10.c 2007-05-26 19:24:56.000000000 +0200 +@@ -442,6 +442,7 @@ + #include <asm/uaccess.h> + #include <linux/kernel.h> + #include <linux/mutex.h> ++#include <linux/miscdevice.h> + + #include <asm/io.h> + #include <asm/irq.h> +@@ -4822,6 +4823,12 @@ + .tiocmset = rs_tiocmset + }; + ++#define CONFIG_ETRAX_SYSFS_NODES ++#ifdef CONFIG_ETRAX_SYSFS_NODES ++static struct class *mem_class; ++#endif ++ ++static struct class *rs_class; + static int __init + rs_init(void) + { +@@ -4948,6 +4955,30 @@ + #endif + #endif /* CONFIG_SVINTO_SIM */ + ++#ifdef CONFIG_ETRAX_SYSFS_NODES ++ ++ rs_class = class_create(THIS_MODULE, "rs_tty"); ++#ifdef CONFIG_ETRAX_SERIAL_PORT0 ++ class_device_create(rs_class, NULL, ++ MKDEV(TTY_MAJOR, 64), ++ NULL, "ttyS0"); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT1 ++ class_device_create(rs_class, NULL, ++ MKDEV(TTY_MAJOR, 65), ++ NULL, "ttyS1"); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT2 ++ class_device_create(rs_class, NULL, ++ MKDEV(TTY_MAJOR, 66), ++ NULL, "ttyS2"); ++#endif ++#ifdef CONFIG_ETRAX_SERIAL_PORT3 ++ class_device_create(rs_class, NULL, ++ MKDEV(TTY_MAJOR, 67), ++ NULL, "ttyS3"); ++#endif ++#endif + return 0; + } + +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/Kconfig 2007-05-26 18:12:22.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/Kconfig 2007-05-26 19:26:06.000000000 +0200 +@@ -900,3 +900,9 @@ + 1 = 2kohm, 2 = 4kohm, 3 = 4kohm + 4 = 1 diode, 8 = 2 diodes + Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 ++ ++config ETRAX_SYSFS_NODES ++ bool "Create device nodes using sysfs for builtin devices" ++ default n ++ help ++ Creates device nodes inside the rootfs dynamically for all the builtin devices +--- linux-2.6.19.2.orig/drivers/serial/crisv10.c 2007-05-28 20:37:56.000000000 +0200 ++++ linux-2.6.19.2/drivers/serial/crisv10.c 2007-05-28 20:39:07.000000000 +0200 +@@ -4823,12 +4823,11 @@ + .tiocmset = rs_tiocmset + }; + +-#define CONFIG_ETRAX_SYSFS_NODES + #ifdef CONFIG_ETRAX_SYSFS_NODES +-static struct class *mem_class; ++static struct class *rs_class; + #endif + +-static struct class *rs_class; ++ + static int __init + rs_init(void) + { diff --git a/target/linux/etrax/patches/cris/010-multi-target-build.patch b/target/linux/etrax/patches/cris/010-multi-target-build.patch new file mode 100644 index 0000000000..9d3a28b502 --- /dev/null +++ b/target/linux/etrax/patches/cris/010-multi-target-build.patch @@ -0,0 +1,1973 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/Makefile 2007-05-28 16:28:34.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/Makefile 2007-05-28 17:24:26.000000000 +0200 +@@ -5,7 +5,7 @@ + OBJCOPY = /usr/local/cris/objcopy-cris + OBJCOPYFLAGS = -O binary --remove-section=.bss + +-subdir- := compressed rescue ++subdir- := compressed + targets := Image + + $(obj)/Image: vmlinux FORCE +@@ -14,8 +14,12 @@ + + $(obj)/compressed/vmlinux: $(obj)/Image FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ +- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin + + $(obj)/zImage: $(obj)/compressed/vmlinux + @cp $< $@ ++ @cp $(obj)/compressed/vmlinux $(obj)/zImage_custom ++ @cp $(obj)/compressed/vmlinux_MCM $(obj)/zImage_MCM ++ @cp $(obj)/compressed/vmlinux_416 $(obj)/zImage_416 ++ @cp $(obj)/compressed/vmlinux_816 $(obj)/zImage_816 ++ @cp $(obj)/compressed/vmlinux_832 $(obj)/zImage_832 + @echo ' Kernel: $@ is ready' +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-28 16:28:34.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/Makefile 2007-05-28 17:03:02.000000000 +0200 +@@ -17,18 +17,34 @@ + + $(obj)/decompress.o: $(OBJECTS) FORCE + $(call if_changed,ld) ++ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_MCM.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_MCM.o ++ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_416.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_416.o ++ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_816.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_816.o ++ $(LD) $(LDFLAGS) arch/cris/boot/compressed/head_832.o arch/cris/boot/compressed/misc.o -o arch/cris/boot/compressed/decompress_832.o + + $(obj)/decompress.bin: $(obj)/decompress.o FORCE + $(call if_changed,objcopy) ++ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_MCM.o $(obj)/decompress_MCM.bin ++ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_416.o $(obj)/decompress_416.bin ++ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_816.o $(obj)/decompress_816.bin ++ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/decompress_832.o $(obj)/decompress_832.bin ++ ++$(obj)/head.o: $(obj)/head.S .config FORCE ++ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c $< -o $@ ++ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_MCM.S -o arch/cris/boot/compressed/head_MCM.o ++ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_416.S -o arch/cris/boot/compressed/head_416.o ++ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_816.S -o arch/cris/boot/compressed/head_816.o ++ /usr/local/cris/gcc-cris -melf -Iinclude -include include/linux/autoconf.h -D__ASSEMBLY__ -traditional -c arch/cris/boot/compressed/head_832.S -o arch/cris/boot/compressed/head_832.o + +-$(obj)/head.o: $(obj)/head.S .config +- /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__ASSEMBLY__ -traditional -c $< -o $@ +- +-$(obj)/misc.o: $(obj)/misc.c .config ++$(obj)/misc.o: $(obj)/misc.c .config FORCE + /usr/local/cris/gcc-cris -melf $(LINUXINCLUDE) -D__KERNEL__ -c $< -o $@ + + $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE + $(call if_changed,image) ++ cat $(obj)/decompress_MCM.bin $(obj)/piggy.gz > $(obj)/vmlinux_MCM ++ cat $(obj)/decompress_416.bin $(obj)/piggy.gz > $(obj)/vmlinux_416 ++ cat $(obj)/decompress_816.bin $(obj)/piggy.gz > $(obj)/vmlinux_816 ++ cat $(obj)/decompress_832.bin $(obj)/piggy.gz > $(obj)/vmlinux_832 + + $(obj)/piggy.gz: $(obj)/../Image FORCE + $(call if_changed,gzip) +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init.S 2007-05-28 16:42:15.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ ++ * ++ * DRAM/SDRAM initialization - alter with care ++ * This file is intended to be included from other assembler files ++ * ++ * Note: This file may not modify r9 because r9 is used to carry ++ * information from the decompresser to the kernel ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ * ++ * $Log: dram_init.S,v $ ++ * Revision 1.5 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.4 2003/09/22 09:21:59 starvik ++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx ++ * so we need to mask off 12 bits. ++ * ++ * Revision 1.3 2003/03/31 09:38:37 starvik ++ * Corrected calculation of end of sdram init commands ++ * ++ * Revision 1.2 2002/11/19 13:33:29 starvik ++ * Changes from Linux 2.4 ++ * ++ * Revision 1.13 2002/10/30 07:42:28 starvik ++ * Always read SDRAM command sequence from flash ++ * ++ * Revision 1.12 2002/08/09 11:37:37 orjanf ++ * Added double initialization work-around for Samsung SDRAMs. ++ * ++ * Revision 1.11 2002/06/04 11:43:21 starvik ++ * Check if mrs_data is specified in kernelconfig (necessary for MCM) ++ * ++ * Revision 1.10 2001/10/04 12:00:21 martinnn ++ * Added missing underscores. ++ * ++ * Revision 1.9 2001/10/01 14:47:35 bjornw ++ * Added register prefixes and removed underscores ++ * ++ * Revision 1.8 2001/05/15 07:12:45 hp ++ * Copy warning from head.S about r8 and r9 ++ * ++ * Revision 1.7 2001/04/18 12:05:39 bjornw ++ * Fixed comments, and explicitely include config.h to be sure its there ++ * ++ * Revision 1.6 2001/04/10 06:20:16 starvik ++ * Delay should be 200us, not 200ns ++ * ++ * Revision 1.5 2001/04/09 06:01:13 starvik ++ * Added support for 100 MHz SDRAMs ++ * ++ * Revision 1.4 2001/03/26 14:24:01 bjornw ++ * Namechange of some config options ++ * ++ * Revision 1.3 2001/03/23 08:29:41 starvik ++ * Corrected calculation of mrs_data ++ * ++ * Revision 1.2 2001/02/08 15:20:00 starvik ++ * Corrected SDRAM initialization ++ * Should now be included as inline ++ * ++ * Revision 1.1 2001/01/29 13:08:02 starvik ++ * Initial version ++ * This file should be included from all assembler files that needs to ++ * initialize DRAM/SDRAM. ++ * ++ */ ++ ++/* Just to be certain the config file is included, we include it here ++ * explicitely instead of depending on it being included in the file that ++ * uses this code. ++ */ ++ ++ ++ ;; WARNING! The registers r8 and r9 are used as parameters carrying ++ ;; information from the decompressor (if the kernel was compressed). ++ ;; They should not be used in the code below. ++ ++#ifndef CONFIG_SVINTO_SIM ++ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 ++ move.d $r0, [R_WAITSTATES] ++ ++ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 ++ move.d $r0, [R_BUS_CONFIG] ++ ++#ifndef CONFIG_ETRAX_SDRAM ++ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 ++ move.d $r0, [R_DRAM_CONFIG] ++ ++ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 ++ move.d $r0, [R_DRAM_TIMING] ++#else ++ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. ++ moveq 2, $r6 ++_sdram_init: ++ ++ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization ++ ++ ; Bank configuration ++ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r0 ++ move.d $r0, [R_SDRAM_CONFIG] ++ ++ ; Calculate value of mrs_data ++ ; CAS latency = 2 && bus_width = 32 => 0x40 ++ ; CAS latency = 3 && bus_width = 32 => 0x60 ++ ; CAS latency = 2 && bus_width = 16 => 0x20 ++ ; CAS latency = 3 && bus_width = 16 => 0x30 ++ ++ ; Check if value is already supplied in kernel config ++ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r2 ++ and.d 0x00ff0000, $r2 ++ bne _set_timing ++ lsrq 16, $r2 ++ ++ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 ++ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 ++ move.d $r1, $r3 ++ and.d 0x03, $r1 ; Get CAS latency ++ and.d 0x1000, $r3 ; 50 or 100 MHz? ++ beq _speed_50 ++ nop ++_speed_100: ++ cmp.d 0x00, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++ ba _bw_check ++ nop ++_speed_50: ++ cmp.d 0x01, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++_bw_check: ++ move.d CONFIG_ETRAX_DEF_R_SDRAM_CONFIG, $r1 ++ and.d 0x800000, $r1 ; DRAM width is bit 23 ++ bne _set_timing ++ nop ++ lsrq 1, $r2 ; 16 bits. Shift down value. ++ ++ ; Set timing parameters. Starts master clock ++_set_timing: ++ move.d CONFIG_ETRAX_DEF_R_SDRAM_TIMING, $r1 ++ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 ++ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set ++ move.d $r1, $r5 ++ or.d 0x0000c000, $r1 ; ref = disable ++ lslq 16, $r2 ; mrs data starts at bit 16 ++ or.d $r2, $r1 ++ move.d $r1, [R_SDRAM_TIMING] ++ ++ ; Wait 200us ++ move.d 10000, $r2 ++1: bne 1b ++ subq 1, $r2 ++ ++ ; Issue initialization command sequence ++ move.d _sdram_commands_start, $r2 ++ and.d 0x000fffff, $r2 ; Make sure commands are read from flash ++ move.d _sdram_commands_end, $r3 ++ and.d 0x000fffff, $r3 ++1: clear.d $r4 ++ move.b [$r2+], $r4 ++ lslq 9, $r4 ; Command starts at bit 9 ++ or.d $r1, $r4 ++ move.d $r4, [R_SDRAM_TIMING] ++ nop ; Wait five nop cycles between each command ++ nop ++ nop ++ nop ++ nop ++ cmp.d $r2, $r3 ++ bne 1b ++ nop ++ move.d $r5, [R_SDRAM_TIMING] ++ subq 1, $r6 ++ bne _sdram_init ++ nop ++ ba _sdram_commands_end ++ nop ++ ++_sdram_commands_start: ++ .byte 3 ; Precharge ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 1 ; mrs ++ .byte 0 ; nop ++_sdram_commands_end: ++#endif ++#endif +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_416.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_416.S 2007-05-28 20:02:25.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ ++ * ++ * DRAM/SDRAM initialization - alter with care ++ * This file is intended to be included from other assembler files ++ * ++ * Note: This file may not modify r9 because r9 is used to carry ++ * information from the decompresser to the kernel ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ * ++ * $Log: dram_init.S,v $ ++ * Revision 1.5 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.4 2003/09/22 09:21:59 starvik ++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx ++ * so we need to mask off 12 bits. ++ * ++ * Revision 1.3 2003/03/31 09:38:37 starvik ++ * Corrected calculation of end of sdram init commands ++ * ++ * Revision 1.2 2002/11/19 13:33:29 starvik ++ * Changes from Linux 2.4 ++ * ++ * Revision 1.13 2002/10/30 07:42:28 starvik ++ * Always read SDRAM command sequence from flash ++ * ++ * Revision 1.12 2002/08/09 11:37:37 orjanf ++ * Added double initialization work-around for Samsung SDRAMs. ++ * ++ * Revision 1.11 2002/06/04 11:43:21 starvik ++ * Check if mrs_data is specified in kernelconfig (necessary for MCM) ++ * ++ * Revision 1.10 2001/10/04 12:00:21 martinnn ++ * Added missing underscores. ++ * ++ * Revision 1.9 2001/10/01 14:47:35 bjornw ++ * Added register prefixes and removed underscores ++ * ++ * Revision 1.8 2001/05/15 07:12:45 hp ++ * Copy warning from head.S about r8 and r9 ++ * ++ * Revision 1.7 2001/04/18 12:05:39 bjornw ++ * Fixed comments, and explicitely include config.h to be sure its there ++ * ++ * Revision 1.6 2001/04/10 06:20:16 starvik ++ * Delay should be 200us, not 200ns ++ * ++ * Revision 1.5 2001/04/09 06:01:13 starvik ++ * Added support for 100 MHz SDRAMs ++ * ++ * Revision 1.4 2001/03/26 14:24:01 bjornw ++ * Namechange of some config options ++ * ++ * Revision 1.3 2001/03/23 08:29:41 starvik ++ * Corrected calculation of mrs_data ++ * ++ * Revision 1.2 2001/02/08 15:20:00 starvik ++ * Corrected SDRAM initialization ++ * Should now be included as inline ++ * ++ * Revision 1.1 2001/01/29 13:08:02 starvik ++ * Initial version ++ * This file should be included from all assembler files that needs to ++ * initialize DRAM/SDRAM. ++ * ++ */ ++ ++/* Just to be certain the config file is included, we include it here ++ * explicitely instead of depending on it being included in the file that ++ * uses this code. ++ */ ++ ++ ++ ;; WARNING! The registers r8 and r9 are used as parameters carrying ++ ;; information from the decompressor (if the kernel was compressed). ++ ;; They should not be used in the code below. ++ ++#ifndef CONFIG_SVINTO_SIM ++ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 ++ move.d $r0, [R_WAITSTATES] ++ ++ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 ++ move.d $r0, [R_BUS_CONFIG] ++ ++#ifndef CONFIG_ETRAX_SDRAM ++ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 ++ move.d $r0, [R_DRAM_CONFIG] ++ ++ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 ++ move.d $r0, [R_DRAM_TIMING] ++#else ++ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. ++ moveq 2, $r6 ++_sdram_init: ++ ++ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization ++ ++ ; Bank configuration ++ move.d 0x09603636, $r0 ++ move.d $r0, [R_SDRAM_CONFIG] ++ ++ ; Calculate value of mrs_data ++ ; CAS latency = 2 && bus_width = 32 => 0x40 ++ ; CAS latency = 3 && bus_width = 32 => 0x60 ++ ; CAS latency = 2 && bus_width = 16 => 0x20 ++ ; CAS latency = 3 && bus_width = 16 => 0x30 ++ ++ ; Check if value is already supplied in kernel config ++ move.d 0x80008002, $r2 ++ and.d 0x00ff0000, $r2 ++ bne _set_timing ++ lsrq 16, $r2 ++ ++ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 ++ move.d 0x80008002, $r1 ++ move.d $r1, $r3 ++ and.d 0x03, $r1 ; Get CAS latency ++ and.d 0x1000, $r3 ; 50 or 100 MHz? ++ beq _speed_50 ++ nop ++_speed_100: ++ cmp.d 0x00, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++ ba _bw_check ++ nop ++_speed_50: ++ cmp.d 0x01, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++_bw_check: ++ move.d 0x09603636, $r1 ++ and.d 0x800000, $r1 ; DRAM width is bit 23 ++ bne _set_timing ++ nop ++ lsrq 1, $r2 ; 16 bits. Shift down value. ++ ++ ; Set timing parameters. Starts master clock ++_set_timing: ++ move.d 0x80008002, $r1 ++ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 ++ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set ++ move.d $r1, $r5 ++ or.d 0x0000c000, $r1 ; ref = disable ++ lslq 16, $r2 ; mrs data starts at bit 16 ++ or.d $r2, $r1 ++ move.d $r1, [R_SDRAM_TIMING] ++ ++ ; Wait 200us ++ move.d 10000, $r2 ++1: bne 1b ++ subq 1, $r2 ++ ++ ; Issue initialization command sequence ++ move.d _sdram_commands_start, $r2 ++ and.d 0x000fffff, $r2 ; Make sure commands are read from flash ++ move.d _sdram_commands_end, $r3 ++ and.d 0x000fffff, $r3 ++1: clear.d $r4 ++ move.b [$r2+], $r4 ++ lslq 9, $r4 ; Command starts at bit 9 ++ or.d $r1, $r4 ++ move.d $r4, [R_SDRAM_TIMING] ++ nop ; Wait five nop cycles between each command ++ nop ++ nop ++ nop ++ nop ++ cmp.d $r2, $r3 ++ bne 1b ++ nop ++ move.d $r5, [R_SDRAM_TIMING] ++ subq 1, $r6 ++ bne _sdram_init ++ nop ++ ba _sdram_commands_end ++ nop ++ ++_sdram_commands_start: ++ .byte 3 ; Precharge ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 1 ; mrs ++ .byte 0 ; nop ++_sdram_commands_end: ++#endif ++#endif +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_816.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_816.S 2007-05-28 20:04:05.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ ++ * ++ * DRAM/SDRAM initialization - alter with care ++ * This file is intended to be included from other assembler files ++ * ++ * Note: This file may not modify r9 because r9 is used to carry ++ * information from the decompresser to the kernel ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ * ++ * $Log: dram_init.S,v $ ++ * Revision 1.5 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.4 2003/09/22 09:21:59 starvik ++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx ++ * so we need to mask off 12 bits. ++ * ++ * Revision 1.3 2003/03/31 09:38:37 starvik ++ * Corrected calculation of end of sdram init commands ++ * ++ * Revision 1.2 2002/11/19 13:33:29 starvik ++ * Changes from Linux 2.4 ++ * ++ * Revision 1.13 2002/10/30 07:42:28 starvik ++ * Always read SDRAM command sequence from flash ++ * ++ * Revision 1.12 2002/08/09 11:37:37 orjanf ++ * Added double initialization work-around for Samsung SDRAMs. ++ * ++ * Revision 1.11 2002/06/04 11:43:21 starvik ++ * Check if mrs_data is specified in kernelconfig (necessary for MCM) ++ * ++ * Revision 1.10 2001/10/04 12:00:21 martinnn ++ * Added missing underscores. ++ * ++ * Revision 1.9 2001/10/01 14:47:35 bjornw ++ * Added register prefixes and removed underscores ++ * ++ * Revision 1.8 2001/05/15 07:12:45 hp ++ * Copy warning from head.S about r8 and r9 ++ * ++ * Revision 1.7 2001/04/18 12:05:39 bjornw ++ * Fixed comments, and explicitely include config.h to be sure its there ++ * ++ * Revision 1.6 2001/04/10 06:20:16 starvik ++ * Delay should be 200us, not 200ns ++ * ++ * Revision 1.5 2001/04/09 06:01:13 starvik ++ * Added support for 100 MHz SDRAMs ++ * ++ * Revision 1.4 2001/03/26 14:24:01 bjornw ++ * Namechange of some config options ++ * ++ * Revision 1.3 2001/03/23 08:29:41 starvik ++ * Corrected calculation of mrs_data ++ * ++ * Revision 1.2 2001/02/08 15:20:00 starvik ++ * Corrected SDRAM initialization ++ * Should now be included as inline ++ * ++ * Revision 1.1 2001/01/29 13:08:02 starvik ++ * Initial version ++ * This file should be included from all assembler files that needs to ++ * initialize DRAM/SDRAM. ++ * ++ */ ++ ++/* Just to be certain the config file is included, we include it here ++ * explicitely instead of depending on it being included in the file that ++ * uses this code. ++ */ ++ ++ ++ ;; WARNING! The registers r8 and r9 are used as parameters carrying ++ ;; information from the decompressor (if the kernel was compressed). ++ ;; They should not be used in the code below. ++ ++#ifndef CONFIG_SVINTO_SIM ++ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 ++ move.d $r0, [R_WAITSTATES] ++ ++ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 ++ move.d $r0, [R_BUS_CONFIG] ++ ++#ifndef CONFIG_ETRAX_SDRAM ++ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 ++ move.d $r0, [R_DRAM_CONFIG] ++ ++ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 ++ move.d $r0, [R_DRAM_TIMING] ++#else ++ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. ++ moveq 2, $r6 ++_sdram_init: ++ ++ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization ++ ++ ; Bank configuration ++ move.d 0x09603636, $r0 ++ move.d $r0, [R_SDRAM_CONFIG] ++ ++ ; Calculate value of mrs_data ++ ; CAS latency = 2 && bus_width = 32 => 0x40 ++ ; CAS latency = 3 && bus_width = 32 => 0x60 ++ ; CAS latency = 2 && bus_width = 16 => 0x20 ++ ; CAS latency = 3 && bus_width = 16 => 0x30 ++ ++ ; Check if value is already supplied in kernel config ++ move.d 0x80008002, $r2 ++ and.d 0x00ff0000, $r2 ++ bne _set_timing ++ lsrq 16, $r2 ++ ++ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 ++ move.d 0x80008002, $r1 ++ move.d $r1, $r3 ++ and.d 0x03, $r1 ; Get CAS latency ++ and.d 0x1000, $r3 ; 50 or 100 MHz? ++ beq _speed_50 ++ nop ++_speed_100: ++ cmp.d 0x00, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++ ba _bw_check ++ nop ++_speed_50: ++ cmp.d 0x01, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++_bw_check: ++ move.d 0x09603636, $r1 ++ and.d 0x800000, $r1 ; DRAM width is bit 23 ++ bne _set_timing ++ nop ++ lsrq 1, $r2 ; 16 bits. Shift down value. ++ ++ ; Set timing parameters. Starts master clock ++_set_timing: ++ move.d 0x80008002, $r1 ++ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 ++ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set ++ move.d $r1, $r5 ++ or.d 0x0000c000, $r1 ; ref = disable ++ lslq 16, $r2 ; mrs data starts at bit 16 ++ or.d $r2, $r1 ++ move.d $r1, [R_SDRAM_TIMING] ++ ++ ; Wait 200us ++ move.d 10000, $r2 ++1: bne 1b ++ subq 1, $r2 ++ ++ ; Issue initialization command sequence ++ move.d _sdram_commands_start, $r2 ++ and.d 0x000fffff, $r2 ; Make sure commands are read from flash ++ move.d _sdram_commands_end, $r3 ++ and.d 0x000fffff, $r3 ++1: clear.d $r4 ++ move.b [$r2+], $r4 ++ lslq 9, $r4 ; Command starts at bit 9 ++ or.d $r1, $r4 ++ move.d $r4, [R_SDRAM_TIMING] ++ nop ; Wait five nop cycles between each command ++ nop ++ nop ++ nop ++ nop ++ cmp.d $r2, $r3 ++ bne 1b ++ nop ++ move.d $r5, [R_SDRAM_TIMING] ++ subq 1, $r6 ++ bne _sdram_init ++ nop ++ ba _sdram_commands_end ++ nop ++ ++_sdram_commands_start: ++ .byte 3 ; Precharge ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 1 ; mrs ++ .byte 0 ; nop ++_sdram_commands_end: ++#endif ++#endif +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_832.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_832.S 2007-05-28 20:04:57.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ ++ * ++ * DRAM/SDRAM initialization - alter with care ++ * This file is intended to be included from other assembler files ++ * ++ * Note: This file may not modify r9 because r9 is used to carry ++ * information from the decompresser to the kernel ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ * ++ * $Log: dram_init.S,v $ ++ * Revision 1.5 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.4 2003/09/22 09:21:59 starvik ++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx ++ * so we need to mask off 12 bits. ++ * ++ * Revision 1.3 2003/03/31 09:38:37 starvik ++ * Corrected calculation of end of sdram init commands ++ * ++ * Revision 1.2 2002/11/19 13:33:29 starvik ++ * Changes from Linux 2.4 ++ * ++ * Revision 1.13 2002/10/30 07:42:28 starvik ++ * Always read SDRAM command sequence from flash ++ * ++ * Revision 1.12 2002/08/09 11:37:37 orjanf ++ * Added double initialization work-around for Samsung SDRAMs. ++ * ++ * Revision 1.11 2002/06/04 11:43:21 starvik ++ * Check if mrs_data is specified in kernelconfig (necessary for MCM) ++ * ++ * Revision 1.10 2001/10/04 12:00:21 martinnn ++ * Added missing underscores. ++ * ++ * Revision 1.9 2001/10/01 14:47:35 bjornw ++ * Added register prefixes and removed underscores ++ * ++ * Revision 1.8 2001/05/15 07:12:45 hp ++ * Copy warning from head.S about r8 and r9 ++ * ++ * Revision 1.7 2001/04/18 12:05:39 bjornw ++ * Fixed comments, and explicitely include config.h to be sure its there ++ * ++ * Revision 1.6 2001/04/10 06:20:16 starvik ++ * Delay should be 200us, not 200ns ++ * ++ * Revision 1.5 2001/04/09 06:01:13 starvik ++ * Added support for 100 MHz SDRAMs ++ * ++ * Revision 1.4 2001/03/26 14:24:01 bjornw ++ * Namechange of some config options ++ * ++ * Revision 1.3 2001/03/23 08:29:41 starvik ++ * Corrected calculation of mrs_data ++ * ++ * Revision 1.2 2001/02/08 15:20:00 starvik ++ * Corrected SDRAM initialization ++ * Should now be included as inline ++ * ++ * Revision 1.1 2001/01/29 13:08:02 starvik ++ * Initial version ++ * This file should be included from all assembler files that needs to ++ * initialize DRAM/SDRAM. ++ * ++ */ ++ ++/* Just to be certain the config file is included, we include it here ++ * explicitely instead of depending on it being included in the file that ++ * uses this code. ++ */ ++ ++ ++ ;; WARNING! The registers r8 and r9 are used as parameters carrying ++ ;; information from the decompressor (if the kernel was compressed). ++ ;; They should not be used in the code below. ++ ++#ifndef CONFIG_SVINTO_SIM ++ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 ++ move.d $r0, [R_WAITSTATES] ++ ++ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 ++ move.d $r0, [R_BUS_CONFIG] ++ ++#ifndef CONFIG_ETRAX_SDRAM ++ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 ++ move.d $r0, [R_DRAM_CONFIG] ++ ++ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 ++ move.d $r0, [R_DRAM_TIMING] ++#else ++ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. ++ moveq 2, $r6 ++_sdram_init: ++ ++ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization ++ ++ ; Bank configuration ++ move.d 0x09603737, $r0 ++ move.d $r0, [R_SDRAM_CONFIG] ++ ++ ; Calculate value of mrs_data ++ ; CAS latency = 2 && bus_width = 32 => 0x40 ++ ; CAS latency = 3 && bus_width = 32 => 0x60 ++ ; CAS latency = 2 && bus_width = 16 => 0x20 ++ ; CAS latency = 3 && bus_width = 16 => 0x30 ++ ++ ; Check if value is already supplied in kernel config ++ move.d 0x80008002, $r2 ++ and.d 0x00ff0000, $r2 ++ bne _set_timing ++ lsrq 16, $r2 ++ ++ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 ++ move.d 0x80008002, $r1 ++ move.d $r1, $r3 ++ and.d 0x03, $r1 ; Get CAS latency ++ and.d 0x1000, $r3 ; 50 or 100 MHz? ++ beq _speed_50 ++ nop ++_speed_100: ++ cmp.d 0x00, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++ ba _bw_check ++ nop ++_speed_50: ++ cmp.d 0x01, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++_bw_check: ++ move.d 0x09603737, $r1 ++ and.d 0x800000, $r1 ; DRAM width is bit 23 ++ bne _set_timing ++ nop ++ lsrq 1, $r2 ; 16 bits. Shift down value. ++ ++ ; Set timing parameters. Starts master clock ++_set_timing: ++ move.d 0x80008002, $r1 ++ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 ++ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set ++ move.d $r1, $r5 ++ or.d 0x0000c000, $r1 ; ref = disable ++ lslq 16, $r2 ; mrs data starts at bit 16 ++ or.d $r2, $r1 ++ move.d $r1, [R_SDRAM_TIMING] ++ ++ ; Wait 200us ++ move.d 10000, $r2 ++1: bne 1b ++ subq 1, $r2 ++ ++ ; Issue initialization command sequence ++ move.d _sdram_commands_start, $r2 ++ and.d 0x000fffff, $r2 ; Make sure commands are read from flash ++ move.d _sdram_commands_end, $r3 ++ and.d 0x000fffff, $r3 ++1: clear.d $r4 ++ move.b [$r2+], $r4 ++ lslq 9, $r4 ; Command starts at bit 9 ++ or.d $r1, $r4 ++ move.d $r4, [R_SDRAM_TIMING] ++ nop ; Wait five nop cycles between each command ++ nop ++ nop ++ nop ++ nop ++ cmp.d $r2, $r3 ++ bne 1b ++ nop ++ move.d $r5, [R_SDRAM_TIMING] ++ subq 1, $r6 ++ bne _sdram_init ++ nop ++ ba _sdram_commands_end ++ nop ++ ++_sdram_commands_start: ++ .byte 3 ; Precharge ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 1 ; mrs ++ .byte 0 ; nop ++_sdram_commands_end: ++#endif ++#endif +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/dram_init_MCM.S 2007-05-28 20:03:13.000000000 +0200 +@@ -0,0 +1,207 @@ ++/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $ ++ * ++ * DRAM/SDRAM initialization - alter with care ++ * This file is intended to be included from other assembler files ++ * ++ * Note: This file may not modify r9 because r9 is used to carry ++ * information from the decompresser to the kernel ++ * ++ * Copyright (C) 2000, 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ * ++ * $Log: dram_init.S,v $ ++ * Revision 1.5 2006/10/13 12:43:11 starvik ++ * Merge of 2.6.18 ++ * ++ * Revision 1.4 2003/09/22 09:21:59 starvik ++ * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx ++ * so we need to mask off 12 bits. ++ * ++ * Revision 1.3 2003/03/31 09:38:37 starvik ++ * Corrected calculation of end of sdram init commands ++ * ++ * Revision 1.2 2002/11/19 13:33:29 starvik ++ * Changes from Linux 2.4 ++ * ++ * Revision 1.13 2002/10/30 07:42:28 starvik ++ * Always read SDRAM command sequence from flash ++ * ++ * Revision 1.12 2002/08/09 11:37:37 orjanf ++ * Added double initialization work-around for Samsung SDRAMs. ++ * ++ * Revision 1.11 2002/06/04 11:43:21 starvik ++ * Check if mrs_data is specified in kernelconfig (necessary for MCM) ++ * ++ * Revision 1.10 2001/10/04 12:00:21 martinnn ++ * Added missing underscores. ++ * ++ * Revision 1.9 2001/10/01 14:47:35 bjornw ++ * Added register prefixes and removed underscores ++ * ++ * Revision 1.8 2001/05/15 07:12:45 hp ++ * Copy warning from head.S about r8 and r9 ++ * ++ * Revision 1.7 2001/04/18 12:05:39 bjornw ++ * Fixed comments, and explicitely include config.h to be sure its there ++ * ++ * Revision 1.6 2001/04/10 06:20:16 starvik ++ * Delay should be 200us, not 200ns ++ * ++ * Revision 1.5 2001/04/09 06:01:13 starvik ++ * Added support for 100 MHz SDRAMs ++ * ++ * Revision 1.4 2001/03/26 14:24:01 bjornw ++ * Namechange of some config options ++ * ++ * Revision 1.3 2001/03/23 08:29:41 starvik ++ * Corrected calculation of mrs_data ++ * ++ * Revision 1.2 2001/02/08 15:20:00 starvik ++ * Corrected SDRAM initialization ++ * Should now be included as inline ++ * ++ * Revision 1.1 2001/01/29 13:08:02 starvik ++ * Initial version ++ * This file should be included from all assembler files that needs to ++ * initialize DRAM/SDRAM. ++ * ++ */ ++ ++/* Just to be certain the config file is included, we include it here ++ * explicitely instead of depending on it being included in the file that ++ * uses this code. ++ */ ++ ++ ++ ;; WARNING! The registers r8 and r9 are used as parameters carrying ++ ;; information from the decompressor (if the kernel was compressed). ++ ;; They should not be used in the code below. ++ ++#ifndef CONFIG_SVINTO_SIM ++ move.d CONFIG_ETRAX_DEF_R_WAITSTATES, $r0 ++ move.d $r0, [R_WAITSTATES] ++ ++ move.d CONFIG_ETRAX_DEF_R_BUS_CONFIG, $r0 ++ move.d $r0, [R_BUS_CONFIG] ++ ++#ifndef CONFIG_ETRAX_SDRAM ++ move.d CONFIG_ETRAX_DEF_R_DRAM_CONFIG, $r0 ++ move.d $r0, [R_DRAM_CONFIG] ++ ++ move.d CONFIG_ETRAX_DEF_R_DRAM_TIMING, $r0 ++ move.d $r0, [R_DRAM_TIMING] ++#else ++ ;; Samsung SDRAMs seem to require to be initialized twice to work properly. ++ moveq 2, $r6 ++_sdram_init: ++ ++ ; Refer to ETRAX 100LX Designers Reference for a description of SDRAM initialization ++ ++ ; Bank configuration ++ move.d 0x09603636, $r0 ++ move.d $r0, [R_SDRAM_CONFIG] ++ ++ ; Calculate value of mrs_data ++ ; CAS latency = 2 && bus_width = 32 => 0x40 ++ ; CAS latency = 3 && bus_width = 32 => 0x60 ++ ; CAS latency = 2 && bus_width = 16 => 0x20 ++ ; CAS latency = 3 && bus_width = 16 => 0x30 ++ ++ ; Check if value is already supplied in kernel config ++ move.d 0x80608002, $r2 ++ and.d 0x00ff0000, $r2 ++ bne _set_timing ++ lsrq 16, $r2 ++ ++ move.d 0x40, $r2 ; Assume 32 bits and CAS latency = 2 ++ move.d 0x80608002, $r1 ++ move.d $r1, $r3 ++ and.d 0x03, $r1 ; Get CAS latency ++ and.d 0x1000, $r3 ; 50 or 100 MHz? ++ beq _speed_50 ++ nop ++_speed_100: ++ cmp.d 0x00, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++ ba _bw_check ++ nop ++_speed_50: ++ cmp.d 0x01, $r1 ; CAS latency = 2? ++ beq _bw_check ++ nop ++ or.d 0x20, $r2 ; CAS latency = 3 ++_bw_check: ++ move.d 0x09603636, $r1 ++ and.d 0x800000, $r1 ; DRAM width is bit 23 ++ bne _set_timing ++ nop ++ lsrq 1, $r2 ; 16 bits. Shift down value. ++ ++ ; Set timing parameters. Starts master clock ++_set_timing: ++ move.d 0x80608002, $r1 ++ and.d 0x8000f9ff, $r1 ; Make sure mrs data and command is 0 ++ or.d 0x80000000, $r1 ; Make sure sdram enable bit is set ++ move.d $r1, $r5 ++ or.d 0x0000c000, $r1 ; ref = disable ++ lslq 16, $r2 ; mrs data starts at bit 16 ++ or.d $r2, $r1 ++ move.d $r1, [R_SDRAM_TIMING] ++ ++ ; Wait 200us ++ move.d 10000, $r2 ++1: bne 1b ++ subq 1, $r2 ++ ++ ; Issue initialization command sequence ++ move.d _sdram_commands_start, $r2 ++ and.d 0x000fffff, $r2 ; Make sure commands are read from flash ++ move.d _sdram_commands_end, $r3 ++ and.d 0x000fffff, $r3 ++1: clear.d $r4 ++ move.b [$r2+], $r4 ++ lslq 9, $r4 ; Command starts at bit 9 ++ or.d $r1, $r4 ++ move.d $r4, [R_SDRAM_TIMING] ++ nop ; Wait five nop cycles between each command ++ nop ++ nop ++ nop ++ nop ++ cmp.d $r2, $r3 ++ bne 1b ++ nop ++ move.d $r5, [R_SDRAM_TIMING] ++ subq 1, $r6 ++ bne _sdram_init ++ nop ++ ba _sdram_commands_end ++ nop ++ ++_sdram_commands_start: ++ .byte 3 ; Precharge ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 2 ; refresh ++ .byte 0 ; nop ++ .byte 1 ; mrs ++ .byte 0 ; nop ++_sdram_commands_end: ++#endif ++#endif +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_416.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_416.S 2007-05-28 17:16:28.000000000 +0200 +@@ -0,0 +1,126 @@ ++/* ++ * arch/cris/boot/compressed/head.S ++ * ++ * Copyright (C) 1999, 2001 Axis Communications AB ++ * ++ * Code that sets up the DRAM registers, calls the ++ * decompressor to unpack the piggybacked kernel, and jumps. ++ * ++ */ ++ ++#define ASSEMBLER_MACROS_ONLY ++#include <asm/arch/sv_addr_ag.h> ++ ++#define RAM_INIT_MAGIC 0x56902387 ++#define COMMAND_LINE_MAGIC 0x87109563 ++ ++ ;; Exported symbols ++ ++ .globl _input_data ++ ++ ++ .text ++ ++ nop ++ di ++ ++;; We need to initialze DRAM registers before we start using the DRAM ++ ++ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? ++ beq dram_init_finished ++ nop ++ ++#include "dram_init_416.S" ++ ++dram_init_finished: ++ ++ ;; Initiate the PA and PB ports ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 ++ move.b r0, [R_PORT_PA_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 ++ move.b r0, [R_PORT_PA_DIR] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 ++ move.b r0, [R_PORT_PB_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 ++ move.b r0, [R_PORT_PB_DIR] ++ ++ ;; Setup the stack to a suitably high address. ++ ;; We assume 8 MB is the minimum DRAM in an eLinux ++ ;; product and put the sp at the top for now. ++ ++ move.d 0x40800000, sp ++ ++ ;; Figure out where the compressed piggyback image is ++ ;; in the flash (since we wont try to copy it to DRAM ++ ;; before unpacking). It is at _edata, but in flash. ++ ;; Use (_edata - basse) as offset to the current PC. ++ ++basse: move.d pc, r5 ++ and.d 0x7fffffff, r5 ; strip any non-cache bit ++ subq 2, r5 ; compensate for the move.d pc instr ++ move.d r5, r0 ; save for later - flash address of 'basse' ++ add.d _edata, r5 ++ sub.d basse, r5 ; r5 = flash address of '_edata' ++ ++ ;; Copy text+data to DRAM ++ ++ move.d basse, r1 ; destination ++ move.d _edata, r2 ; end destination ++1: move.w [r0+], r3 ++ move.w r3, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ move.d r5, [_input_data] ; for the decompressor ++ ++ ++ ;; Clear the decompressors BSS (between _edata and _end) ++ ++ moveq 0, r0 ++ move.d _edata, r1 ++ move.d _end, r2 ++1: move.w r0, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ ;; Save command line magic and address. ++ move.d _cmd_line_magic, $r12 ++ move.d $r10, [$r12] ++ move.d _cmd_line_addr, $r12 ++ move.d $r11, [$r12] ++ ++ ;; Do the decompression and save compressed size in _inptr ++ ++ jsr _decompress_kernel ++ ++ ;; Put start address of root partition in r9 so the kernel can use it ++ ;; when mounting from flash ++ ++ move.d [_input_data], r9 ; flash address of compressed kernel ++ add.d [_inptr], r9 ; size of compressed kernel ++ ++ ;; Restore command line magic and address. ++ move.d _cmd_line_magic, $r10 ++ move.d [$r10], $r10 ++ move.d _cmd_line_addr, $r11 ++ move.d [$r11], $r11 ++ ++ ;; Enter the decompressed kernel ++ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized ++ jump 0x40004000 ; kernel is linked to this address ++ ++ .data ++ ++_input_data: ++ .dword 0 ; used by the decompressor ++_cmd_line_magic: ++ .dword 0 ++_cmd_line_addr: ++ .dword 0 ++#include "hw_settings_416.S" +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_816.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_816.S 2007-05-28 17:16:58.000000000 +0200 +@@ -0,0 +1,126 @@ ++/* ++ * arch/cris/boot/compressed/head.S ++ * ++ * Copyright (C) 1999, 2001 Axis Communications AB ++ * ++ * Code that sets up the DRAM registers, calls the ++ * decompressor to unpack the piggybacked kernel, and jumps. ++ * ++ */ ++ ++#define ASSEMBLER_MACROS_ONLY ++#include <asm/arch/sv_addr_ag.h> ++ ++#define RAM_INIT_MAGIC 0x56902387 ++#define COMMAND_LINE_MAGIC 0x87109563 ++ ++ ;; Exported symbols ++ ++ .globl _input_data ++ ++ ++ .text ++ ++ nop ++ di ++ ++;; We need to initialze DRAM registers before we start using the DRAM ++ ++ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? ++ beq dram_init_finished ++ nop ++ ++#include "dram_init_816.S" ++ ++dram_init_finished: ++ ++ ;; Initiate the PA and PB ports ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 ++ move.b r0, [R_PORT_PA_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 ++ move.b r0, [R_PORT_PA_DIR] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 ++ move.b r0, [R_PORT_PB_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 ++ move.b r0, [R_PORT_PB_DIR] ++ ++ ;; Setup the stack to a suitably high address. ++ ;; We assume 8 MB is the minimum DRAM in an eLinux ++ ;; product and put the sp at the top for now. ++ ++ move.d 0x40800000, sp ++ ++ ;; Figure out where the compressed piggyback image is ++ ;; in the flash (since we wont try to copy it to DRAM ++ ;; before unpacking). It is at _edata, but in flash. ++ ;; Use (_edata - basse) as offset to the current PC. ++ ++basse: move.d pc, r5 ++ and.d 0x7fffffff, r5 ; strip any non-cache bit ++ subq 2, r5 ; compensate for the move.d pc instr ++ move.d r5, r0 ; save for later - flash address of 'basse' ++ add.d _edata, r5 ++ sub.d basse, r5 ; r5 = flash address of '_edata' ++ ++ ;; Copy text+data to DRAM ++ ++ move.d basse, r1 ; destination ++ move.d _edata, r2 ; end destination ++1: move.w [r0+], r3 ++ move.w r3, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ move.d r5, [_input_data] ; for the decompressor ++ ++ ++ ;; Clear the decompressors BSS (between _edata and _end) ++ ++ moveq 0, r0 ++ move.d _edata, r1 ++ move.d _end, r2 ++1: move.w r0, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ ;; Save command line magic and address. ++ move.d _cmd_line_magic, $r12 ++ move.d $r10, [$r12] ++ move.d _cmd_line_addr, $r12 ++ move.d $r11, [$r12] ++ ++ ;; Do the decompression and save compressed size in _inptr ++ ++ jsr _decompress_kernel ++ ++ ;; Put start address of root partition in r9 so the kernel can use it ++ ;; when mounting from flash ++ ++ move.d [_input_data], r9 ; flash address of compressed kernel ++ add.d [_inptr], r9 ; size of compressed kernel ++ ++ ;; Restore command line magic and address. ++ move.d _cmd_line_magic, $r10 ++ move.d [$r10], $r10 ++ move.d _cmd_line_addr, $r11 ++ move.d [$r11], $r11 ++ ++ ;; Enter the decompressed kernel ++ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized ++ jump 0x40004000 ; kernel is linked to this address ++ ++ .data ++ ++_input_data: ++ .dword 0 ; used by the decompressor ++_cmd_line_magic: ++ .dword 0 ++_cmd_line_addr: ++ .dword 0 ++#include "hw_settings_816.S" +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_832.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_832.S 2007-05-28 17:17:12.000000000 +0200 +@@ -0,0 +1,126 @@ ++/* ++ * arch/cris/boot/compressed/head.S ++ * ++ * Copyright (C) 1999, 2001 Axis Communications AB ++ * ++ * Code that sets up the DRAM registers, calls the ++ * decompressor to unpack the piggybacked kernel, and jumps. ++ * ++ */ ++ ++#define ASSEMBLER_MACROS_ONLY ++#include <asm/arch/sv_addr_ag.h> ++ ++#define RAM_INIT_MAGIC 0x56902387 ++#define COMMAND_LINE_MAGIC 0x87109563 ++ ++ ;; Exported symbols ++ ++ .globl _input_data ++ ++ ++ .text ++ ++ nop ++ di ++ ++;; We need to initialze DRAM registers before we start using the DRAM ++ ++ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? ++ beq dram_init_finished ++ nop ++ ++#include "dram_init_832.S" ++ ++dram_init_finished: ++ ++ ;; Initiate the PA and PB ports ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 ++ move.b r0, [R_PORT_PA_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 ++ move.b r0, [R_PORT_PA_DIR] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 ++ move.b r0, [R_PORT_PB_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 ++ move.b r0, [R_PORT_PB_DIR] ++ ++ ;; Setup the stack to a suitably high address. ++ ;; We assume 8 MB is the minimum DRAM in an eLinux ++ ;; product and put the sp at the top for now. ++ ++ move.d 0x40800000, sp ++ ++ ;; Figure out where the compressed piggyback image is ++ ;; in the flash (since we wont try to copy it to DRAM ++ ;; before unpacking). It is at _edata, but in flash. ++ ;; Use (_edata - basse) as offset to the current PC. ++ ++basse: move.d pc, r5 ++ and.d 0x7fffffff, r5 ; strip any non-cache bit ++ subq 2, r5 ; compensate for the move.d pc instr ++ move.d r5, r0 ; save for later - flash address of 'basse' ++ add.d _edata, r5 ++ sub.d basse, r5 ; r5 = flash address of '_edata' ++ ++ ;; Copy text+data to DRAM ++ ++ move.d basse, r1 ; destination ++ move.d _edata, r2 ; end destination ++1: move.w [r0+], r3 ++ move.w r3, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ move.d r5, [_input_data] ; for the decompressor ++ ++ ++ ;; Clear the decompressors BSS (between _edata and _end) ++ ++ moveq 0, r0 ++ move.d _edata, r1 ++ move.d _end, r2 ++1: move.w r0, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ ;; Save command line magic and address. ++ move.d _cmd_line_magic, $r12 ++ move.d $r10, [$r12] ++ move.d _cmd_line_addr, $r12 ++ move.d $r11, [$r12] ++ ++ ;; Do the decompression and save compressed size in _inptr ++ ++ jsr _decompress_kernel ++ ++ ;; Put start address of root partition in r9 so the kernel can use it ++ ;; when mounting from flash ++ ++ move.d [_input_data], r9 ; flash address of compressed kernel ++ add.d [_inptr], r9 ; size of compressed kernel ++ ++ ;; Restore command line magic and address. ++ move.d _cmd_line_magic, $r10 ++ move.d [$r10], $r10 ++ move.d _cmd_line_addr, $r11 ++ move.d [$r11], $r11 ++ ++ ;; Enter the decompressed kernel ++ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized ++ jump 0x40004000 ; kernel is linked to this address ++ ++ .data ++ ++_input_data: ++ .dword 0 ; used by the decompressor ++_cmd_line_magic: ++ .dword 0 ++_cmd_line_addr: ++ .dword 0 ++#include "hw_settings_832.S" +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/head_MCM.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/head_MCM.S 2007-05-28 17:17:51.000000000 +0200 +@@ -0,0 +1,126 @@ ++/* ++ * arch/cris/boot/compressed/head.S ++ * ++ * Copyright (C) 1999, 2001 Axis Communications AB ++ * ++ * Code that sets up the DRAM registers, calls the ++ * decompressor to unpack the piggybacked kernel, and jumps. ++ * ++ */ ++ ++#define ASSEMBLER_MACROS_ONLY ++#include <asm/arch/sv_addr_ag.h> ++ ++#define RAM_INIT_MAGIC 0x56902387 ++#define COMMAND_LINE_MAGIC 0x87109563 ++ ++ ;; Exported symbols ++ ++ .globl _input_data ++ ++ ++ .text ++ ++ nop ++ di ++ ++;; We need to initialze DRAM registers before we start using the DRAM ++ ++ cmp.d RAM_INIT_MAGIC, r8 ; Already initialized? ++ beq dram_init_finished ++ nop ++ ++#include "dram_init_MCM.S" ++ ++dram_init_finished: ++ ++ ;; Initiate the PA and PB ports ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0 ++ move.b r0, [R_PORT_PA_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0 ++ move.b r0, [R_PORT_PA_DIR] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0 ++ move.b r0, [R_PORT_PB_DATA] ++ ++ move.b CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0 ++ move.b r0, [R_PORT_PB_DIR] ++ ++ ;; Setup the stack to a suitably high address. ++ ;; We assume 8 MB is the minimum DRAM in an eLinux ++ ;; product and put the sp at the top for now. ++ ++ move.d 0x40800000, sp ++ ++ ;; Figure out where the compressed piggyback image is ++ ;; in the flash (since we wont try to copy it to DRAM ++ ;; before unpacking). It is at _edata, but in flash. ++ ;; Use (_edata - basse) as offset to the current PC. ++ ++basse: move.d pc, r5 ++ and.d 0x7fffffff, r5 ; strip any non-cache bit ++ subq 2, r5 ; compensate for the move.d pc instr ++ move.d r5, r0 ; save for later - flash address of 'basse' ++ add.d _edata, r5 ++ sub.d basse, r5 ; r5 = flash address of '_edata' ++ ++ ;; Copy text+data to DRAM ++ ++ move.d basse, r1 ; destination ++ move.d _edata, r2 ; end destination ++1: move.w [r0+], r3 ++ move.w r3, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ move.d r5, [_input_data] ; for the decompressor ++ ++ ++ ;; Clear the decompressors BSS (between _edata and _end) ++ ++ moveq 0, r0 ++ move.d _edata, r1 ++ move.d _end, r2 ++1: move.w r0, [r1+] ++ cmp.d r2, r1 ++ bcs 1b ++ nop ++ ++ ;; Save command line magic and address. ++ move.d _cmd_line_magic, $r12 ++ move.d $r10, [$r12] ++ move.d _cmd_line_addr, $r12 ++ move.d $r11, [$r12] ++ ++ ;; Do the decompression and save compressed size in _inptr ++ ++ jsr _decompress_kernel ++ ++ ;; Put start address of root partition in r9 so the kernel can use it ++ ;; when mounting from flash ++ ++ move.d [_input_data], r9 ; flash address of compressed kernel ++ add.d [_inptr], r9 ; size of compressed kernel ++ ++ ;; Restore command line magic and address. ++ move.d _cmd_line_magic, $r10 ++ move.d [$r10], $r10 ++ move.d _cmd_line_addr, $r11 ++ move.d [$r11], $r11 ++ ++ ;; Enter the decompressed kernel ++ move.d RAM_INIT_MAGIC, r8 ; Tell kernel that DRAM is initialized ++ jump 0x40004000 ; kernel is linked to this address ++ ++ .data ++ ++_input_data: ++ .dword 0 ; used by the decompressor ++_cmd_line_magic: ++ .dword 0 ++_cmd_line_addr: ++ .dword 0 ++#include "hw_settings_MCM.S" +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-28 17:14:14.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++ * ++ * This table is used by some tools to extract hardware parameters. ++ * The table should be included in the kernel and the decompressor. ++ * Don't forget to update the tools if you change this table. ++ * ++ * Copyright (C) 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ */ ++ ++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) ++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) ++ ++ .ascii "HW_PARAM_MAGIC" ; Magic number ++ .dword 0xc0004000 ; Kernel start address ++ ++ ; Debug port ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ .dword 0 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT1) ++ .dword 1 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT2) ++ .dword 2 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT3) ++ .dword 3 ++#else ++ .dword 4 ; No debug ++#endif ++ ++ ; SDRAM or EDO DRAM? ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword 1 ++#else ++ .dword 0 ++#endif ++ ++ ; Register values ++ .dword R_WAITSTATES ++ .dword CONFIG_ETRAX_DEF_R_WAITSTATES ++ .dword R_BUS_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword R_SDRAM_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG ++ .dword R_SDRAM_TIMING ++ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING ++#else ++ .dword R_DRAM_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG ++ .dword R_DRAM_TIMING ++ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING ++#endif ++ .dword R_PORT_PA_SET ++ .dword PA_SET_VALUE ++ .dword R_PORT_PB_SET ++ .dword PB_SET_VALUE ++ .dword 0 ; No more register values +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-28 20:12:02.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++ * ++ * This table is used by some tools to extract hardware parameters. ++ * The table should be included in the kernel and the decompressor. ++ * Don't forget to update the tools if you change this table. ++ * ++ * Copyright (C) 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ */ ++ ++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) ++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) ++ ++ .ascii "HW_PARAM_MAGIC" ; Magic number ++ .dword 0xc0004000 ; Kernel start address ++ ++ ; Debug port ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ .dword 0 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT1) ++ .dword 1 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT2) ++ .dword 2 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT3) ++ .dword 3 ++#else ++ .dword 4 ; No debug ++#endif ++ ++ ; SDRAM or EDO DRAM? ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword 1 ++#else ++ .dword 0 ++#endif ++ ++ ; Register values ++ .dword R_WAITSTATES ++ .dword CONFIG_ETRAX_DEF_R_WAITSTATES ++ .dword R_BUS_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword R_SDRAM_CONFIG ++ .dword 0x09603636 ++ .dword R_SDRAM_TIMING ++ .dword 0x80008002 ++#else ++ .dword R_DRAM_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG ++ .dword R_DRAM_TIMING ++ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING ++#endif ++ .dword R_PORT_PA_SET ++ .dword PA_SET_VALUE ++ .dword R_PORT_PB_SET ++ .dword PB_SET_VALUE ++ .dword 0 ; No more register values +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-28 20:12:29.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++ * ++ * This table is used by some tools to extract hardware parameters. ++ * The table should be included in the kernel and the decompressor. ++ * Don't forget to update the tools if you change this table. ++ * ++ * Copyright (C) 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ */ ++ ++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) ++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) ++ ++ .ascii "HW_PARAM_MAGIC" ; Magic number ++ .dword 0xc0004000 ; Kernel start address ++ ++ ; Debug port ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ .dword 0 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT1) ++ .dword 1 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT2) ++ .dword 2 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT3) ++ .dword 3 ++#else ++ .dword 4 ; No debug ++#endif ++ ++ ; SDRAM or EDO DRAM? ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword 1 ++#else ++ .dword 0 ++#endif ++ ++ ; Register values ++ .dword R_WAITSTATES ++ .dword CONFIG_ETRAX_DEF_R_WAITSTATES ++ .dword R_BUS_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword R_SDRAM_CONFIG ++ .dword 0x09603636 ++ .dword R_SDRAM_TIMING ++ .dword 0x80008002 ++#else ++ .dword R_DRAM_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG ++ .dword R_DRAM_TIMING ++ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING ++#endif ++ .dword R_PORT_PA_SET ++ .dword PA_SET_VALUE ++ .dword R_PORT_PB_SET ++ .dword PB_SET_VALUE ++ .dword 0 ; No more register values +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-28 20:12:55.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++ * ++ * This table is used by some tools to extract hardware parameters. ++ * The table should be included in the kernel and the decompressor. ++ * Don't forget to update the tools if you change this table. ++ * ++ * Copyright (C) 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ */ ++ ++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) ++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) ++ ++ .ascii "HW_PARAM_MAGIC" ; Magic number ++ .dword 0xc0004000 ; Kernel start address ++ ++ ; Debug port ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ .dword 0 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT1) ++ .dword 1 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT2) ++ .dword 2 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT3) ++ .dword 3 ++#else ++ .dword 4 ; No debug ++#endif ++ ++ ; SDRAM or EDO DRAM? ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword 1 ++#else ++ .dword 0 ++#endif ++ ++ ; Register values ++ .dword R_WAITSTATES ++ .dword CONFIG_ETRAX_DEF_R_WAITSTATES ++ .dword R_BUS_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword R_SDRAM_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_SDRAM_CONFIG ++ .dword R_SDRAM_TIMING ++ .dword CONFIG_ETRAX_DEF_R_SDRAM_TIMING ++#else ++ .dword R_DRAM_CONFIG ++ .dword 0x09603737 ++ .dword R_DRAM_TIMING ++ .dword 0x80008002 ++#endif ++ .dword R_PORT_PA_SET ++ .dword PA_SET_VALUE ++ .dword R_PORT_PB_SET ++ .dword PB_SET_VALUE ++ .dword 0 ; No more register values +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-28 20:11:31.000000000 +0200 +@@ -0,0 +1,62 @@ ++/* ++ * $Id: hw_settings.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $ ++ * ++ * This table is used by some tools to extract hardware parameters. ++ * The table should be included in the kernel and the decompressor. ++ * Don't forget to update the tools if you change this table. ++ * ++ * Copyright (C) 2001 Axis Communications AB ++ * ++ * Authors: Mikael Starvik (starvik@axis.com) ++ */ ++ ++#define PA_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PA_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PA_DATA)) ++#define PB_SET_VALUE ((CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG << 16) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DIR << 8) | \ ++ (CONFIG_ETRAX_DEF_R_PORT_PB_DATA)) ++ ++ .ascii "HW_PARAM_MAGIC" ; Magic number ++ .dword 0xc0004000 ; Kernel start address ++ ++ ; Debug port ++#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++ .dword 0 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT1) ++ .dword 1 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT2) ++ .dword 2 ++#elif defined(CONFIG_ETRAX_DEBUG_PORT3) ++ .dword 3 ++#else ++ .dword 4 ; No debug ++#endif ++ ++ ; SDRAM or EDO DRAM? ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword 1 ++#else ++ .dword 0 ++#endif ++ ++ ; Register values ++ .dword R_WAITSTATES ++ .dword CONFIG_ETRAX_DEF_R_WAITSTATES ++ .dword R_BUS_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_BUS_CONFIG ++#ifdef CONFIG_ETRAX_SDRAM ++ .dword R_SDRAM_CONFIG ++ .dword 0x09603636 ++ .dword R_SDRAM_TIMING ++ .dword 0x80608002 ++#else ++ .dword R_DRAM_CONFIG ++ .dword CONFIG_ETRAX_DEF_R_DRAM_CONFIG ++ .dword R_DRAM_TIMING ++ .dword CONFIG_ETRAX_DEF_R_DRAM_TIMING ++#endif ++ .dword R_PORT_PA_SET ++ .dword PA_SET_VALUE ++ .dword R_PORT_PB_SET ++ .dword PB_SET_VALUE ++ .dword 0 ; No more register values diff --git a/target/linux/etrax/patches/cris/011-debug-port b/target/linux/etrax/patches/cris/011-debug-port new file mode 100644 index 0000000000..ecd780c608 --- /dev/null +++ b/target/linux/etrax/patches/cris/011-debug-port @@ -0,0 +1,26 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 21:53:52.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 22:23:16.000000000 +0200 +@@ -143,9 +143,10 @@ + static void + puts(const char *s) + { +-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL +- while(*s) { +-#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++#if defined(CONFIG_ETRAX_DEBUG_PORT0) || defined(CONFIG_ETRAX_DEBUG_PORT1) || defined(CONFIG_ETRAX_DEBUG_PORT2) || defined(CONFIG_ETRAX_DEBUG_PORT3) || defined(CONFIG_ETRAX_SERIAL_PORT0) ++ ++while(*s) { ++#if defined(CONFIG_ETRAX_DEBUG_PORT0) || defined(CONFIG_ETRAX_SERIAL_PORT0) + while(!(*R_SERIAL0_STATUS & (1 << 5))) ; + *R_SERIAL0_TR_DATA = *s++; + #endif +@@ -232,7 +233,7 @@ + /* input_data is set in head.S */ + inbuf = input_data; + +-#ifdef CONFIG_ETRAX_DEBUG_PORT0 ++#if defined(CONFIG_ETRAX_DEBUG_PORT0) || defined(CONFIG_ETRAX_SERIAL_PORT0) + *R_SERIAL0_XOFF = 0; + *R_SERIAL0_BAUD = 0x99; + *R_SERIAL0_TR_CTRL = 0x40; diff --git a/target/linux/etrax/patches/cris/012-splash.patch b/target/linux/etrax/patches/cris/012-splash.patch new file mode 100644 index 0000000000..73c3f9fabe --- /dev/null +++ b/target/linux/etrax/patches/cris/012-splash.patch @@ -0,0 +1,22 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 22:35:23.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/misc.c 2007-05-28 22:40:43.000000000 +0200 +@@ -266,8 +266,16 @@ + puts("You need an ETRAX 100LX to run linux 2.6\n"); + while(1); + } ++ puts("\r\n _ _ _ \r\n"); ++ puts(" | | (_) | \r\n"); ++ puts(" __ _ ___ _ __ ___ ___ ___ _ _ ___| |_ ___ _ __ ___ ___ _| |_\r\n"); ++ puts(" / _` |/ __| '_ ` _ \\ / _ \\/ __| | | / __| __/ _ \\ '_ ` _ \\/ __| | | __|\r\n"); ++ puts(" | (_| | (__| | | | | | __/\\__ \\ |_| \\__ \\ || __/ | | | | \\__ \\_| | |_ \r\n"); ++ puts(" \\__,_|\\___|_| |_| |_|\\___||___/\\__, |___/\\__\\___|_| |_| |_|___(_)_|\\__|\r\n"); ++ puts(" __/ | \r\n"); ++ puts(" |___/ FOXBOARD @ www.acmesystems.it \r\n"); + +- puts("Uncompressing Linux...\n"); ++ puts("Uncompressing Linux...\r\n"); + gunzip(); +- puts("Done. Now booting the kernel.\n"); ++ puts("Done. Now booting the kernel.\r\n"); + } diff --git a/target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch b/target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch new file mode 100644 index 0000000000..7f594c4194 --- /dev/null +++ b/target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch @@ -0,0 +1,180 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.19.2/arch/cris/arch-v10/drivers/ds1302.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/ds1302.c 2007-05-28 22:35:23.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/ds1302.c 2007-05-28 22:55:40.000000000 +0200 +@@ -21,7 +21,7 @@ + #include <linux/delay.h> + #include <linux/bcd.h> + #include <linux/capability.h> +- ++#include <linux/device.h> + #include <asm/uaccess.h> + #include <asm/system.h> + #include <asm/arch/svinto.h> +@@ -480,6 +480,10 @@ + return 0; + } + ++#ifdef CONFIG_SYSFS ++static struct class *rtc_class; ++#endif ++ + static int __init ds1302_register(void) + { + ds1302_init(); +@@ -488,7 +492,15 @@ + ds1302_name, RTC_MAJOR_NR); + return -1; + } +- return 0; ++ ++ #ifdef CONFIG_SYSFS ++ rtc_class = class_create(THIS_MODULE, "rtc"); ++ class_device_create(rtc_class, NULL, ++ MKDEV(RTC_MAJOR_NR, 0), ++ NULL, "rtc"); ++ #endif ++ ++ return 0; + + } + +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/eeprom.c linux-2.6.19.2/arch/cris/arch-v10/drivers/eeprom.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/eeprom.c 2007-05-28 22:35:23.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/eeprom.c 2007-05-28 23:03:45.000000000 +0200 +@@ -103,6 +103,7 @@ + #include <linux/delay.h> + #include <linux/interrupt.h> + #include <linux/wait.h> ++#include <linux/device.h> + #include <asm/uaccess.h> + #include "i2c.h" + +@@ -185,6 +186,9 @@ + }; + + /* eeprom init call. Probes for different eeprom models. */ ++#ifdef CONFIG_SYSFS ++static struct class *eep_class; ++#endif + + int __init eeprom_init(void) + { +@@ -202,7 +206,13 @@ + eeprom_name, EEPROM_MAJOR_NR); + return -1; + } +- ++ ++#ifdef CONFIG_SYSFS ++ eep_class = class_create(THIS_MODULE, "eep"); ++ class_device_create(eep_class, NULL, MKDEV(EEPROM_MAJOR, 0), NULL, "eeprom"); ++#endif ++ ++ + printk("EEPROM char device v0.3, (c) 2000 Axis Communications AB\n"); + + /* +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/gpio.c linux-2.6.19.2/arch/cris/arch-v10/drivers/gpio.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/gpio.c 2007-05-28 22:35:23.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/gpio.c 2007-05-28 22:59:27.000000000 +0200 +@@ -181,6 +181,7 @@ + #include <linux/poll.h> + #include <linux/init.h> + #include <linux/interrupt.h> ++#include <linux/device.h> + + #include <asm/etraxgpio.h> + #include <asm/arch/svinto.h> +@@ -938,6 +939,10 @@ + + /* main driver initialization routine, called from mem.c */ + ++#ifdef CONFIG_SYSFS ++static struct class *gpio_class; ++#endif ++ + static __init int + gpio_init(void) + { +@@ -955,6 +960,14 @@ + return res; + } + ++#ifdef CONFIG_SYSFS ++ gpio_class = class_create(THIS_MODULE, "gpio"); ++ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 0), NULL, "gpioa"); ++ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 1), NULL, "gpiob"); ++ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 2), NULL, "leds"); ++ class_device_create(gpio_class, NULL, MKDEV(GPIO_MAJOR, 3), NULL, "gpiog"); ++#endif ++ + /* Clear all leds */ + #if defined (CONFIG_ETRAX_CSP0_LEDS) || defined (CONFIG_ETRAX_PA_LEDS) || defined (CONFIG_ETRAX_PB_LEDS) + LED_NETWORK_SET(0); +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/pcf8563.c linux-2.6.19.2/arch/cris/arch-v10/drivers/pcf8563.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/pcf8563.c 2007-05-28 22:35:23.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/pcf8563.c 2007-05-28 23:09:02.000000000 +0200 +@@ -26,6 +26,7 @@ + #include <linux/ioctl.h> + #include <linux/delay.h> + #include <linux/bcd.h> ++#include <linux/device.h> + + #include <asm/uaccess.h> + #include <asm/system.h> +@@ -344,6 +345,10 @@ + return 0; + } + ++#ifdef CONFIG_SYSFS ++static struct class *pcf8563_class; ++#endif ++ + static int __init + pcf8563_register(void) + { +@@ -358,6 +363,10 @@ + "device.\n", PCF8563_NAME, PCF8563_MAJOR); + return -1; + } ++#ifdef CONFIG_SYSFS ++ pcf8563_class = class_create(THIS_MODULE, "pcf8563"); ++ class_device_create(pcf8563_class, NULL, MKDEV(PCF8563_MAJOR, 0), NULL, "rtc"); ++#endif + + printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, + DRIVER_VERSION); +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/sync_serial.c linux-2.6.19.2/arch/cris/arch-v10/drivers/sync_serial.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/sync_serial.c 2007-05-28 22:35:23.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/sync_serial.c 2007-05-28 23:06:41.000000000 +0200 +@@ -29,6 +29,8 @@ + #include <asm/uaccess.h> + #include <asm/system.h> + #include <asm/sync_serial.h> ++#include <linux/device.h> ++ + #include <asm/arch/io_interface_mux.h> + + /* The receiver is a bit tricky beacuse of the continuous stream of data.*/ +@@ -241,6 +243,9 @@ + .open = sync_serial_open, + .release = sync_serial_release + }; ++#ifdef CONFIG_SYSFS ++static struct class *syncser_class; ++#endif + + static int __init etrax_sync_serial_init(void) + { +@@ -274,6 +279,11 @@ + printk("unable to get major for synchronous serial port\n"); + return -EBUSY; + } ++#ifdef CONFIG_SYSFS ++ syncser_class = class_create(THIS_MODULE, "syncser"); ++ class_device_create(syncser_class, NULL, MKDEV(SYNC_SERIAL_MAJOR, 0), NULL, "syncser0"); ++ class_device_create(syncser_class, NULL, MKDEV(SYNC_SERIAL_MAJOR, 1), NULL, "syncser1"); ++#endif + + /* Deselect synchronous serial ports while configuring. */ + SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async); diff --git a/target/linux/etrax/patches/cris/014-partition-tables.patch b/target/linux/etrax/patches/cris/014-partition-tables.patch new file mode 100644 index 0000000000..d32762a81e --- /dev/null +++ b/target/linux/etrax/patches/cris/014-partition-tables.patch @@ -0,0 +1,102 @@ +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-29 23:30:35.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-05-29 23:33:44.000000000 +0200 +@@ -60,3 +60,5 @@ + .dword R_PORT_PB_SET + .dword PB_SET_VALUE + .dword 0 ; No more register values ++ .ascii "ACME_PART_MAGIC" ; Magic number ++ .dword 0xdeadc0de +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-29 23:30:35.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-05-29 23:33:44.000000000 +0200 +@@ -60,3 +60,5 @@ + .dword R_PORT_PB_SET + .dword PB_SET_VALUE + .dword 0 ; No more register values ++ .ascii "ACME_PART_MAGIC" ; Magic number ++ .dword 0xdeadc0de +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-29 23:30:35.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-05-29 23:33:44.000000000 +0200 +@@ -60,3 +60,5 @@ + .dword R_PORT_PB_SET + .dword PB_SET_VALUE + .dword 0 ; No more register values ++ .ascii "ACME_PART_MAGIC" ; Magic number ++ .dword 0xdeadc0de +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-29 23:30:35.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-05-29 23:33:44.000000000 +0200 +@@ -60,3 +60,5 @@ + .dword R_PORT_PB_SET + .dword PB_SET_VALUE + .dword 0 ; No more register values ++ .ascii "ACME_PART_MAGIC" ; Magic number ++ .dword 0xdeadc0de +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S +--- linux-2.6.19.2.orig/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-29 23:30:35.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-05-29 23:33:44.000000000 +0200 +@@ -60,3 +60,5 @@ + .dword R_PORT_PB_SET + .dword PB_SET_VALUE + .dword 0 ; No more register values ++ .ascii "ACME_PART_MAGIC" ; Magic number ++ .dword 0xdeadc0de +diff -urN linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-29 23:30:36.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/axisflashmap.c 2007-05-29 23:36:31.000000000 +0200 +@@ -421,6 +421,11 @@ + struct partitiontable_entry *ptable; + int use_default_ptable = 1; /* Until proven otherwise. */ + const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n"; ++ unsigned int kernel_part_size = 0; ++ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR); ++ unsigned int flash_scan_count = 0; ++ const char *part_magic = "ACME_PART_MAGIC"; ++ unsigned int magic_len = strlen(part_magic); + + if (!(mymtd = flash_probe())) { + /* There's no reason to use this module if no flash chip can +@@ -432,6 +437,32 @@ + mymtd->name, mymtd->size); + axisflash_mtd = mymtd; + } ++ /* scan flash to findout where out partition starts */ ++ ++ printk(KERN_INFO "Scanning flash for end of kernel magic\n"); ++ for(flash_scan_count = 0; flash_scan_count < 100000; flash_scan_count++){ ++ if(strncmp(&flash_mem[flash_scan_count], part_magic, magic_len - 1) == 0){ ++ //printk(KERN_INFO "Found end of kernel magic at 0x%.08X\n", flash_scan_count); ++ kernel_part_size = flash_mem[flash_scan_count + magic_len ]; ++ kernel_part_size <<= 8; ++ kernel_part_size += flash_mem[flash_scan_count + magic_len + 2]; ++ kernel_part_size <<= 8; ++ kernel_part_size += flash_mem[flash_scan_count + magic_len + 1]; ++ kernel_part_size <<= 8; ++ kernel_part_size += flash_mem[flash_scan_count + magic_len + 3]; ++ printk(KERN_INFO "Kernel ends at 0x%.08X\n", kernel_part_size); ++ flash_scan_count = 1100000; ++ } ++ } ++ ++ ++ if(kernel_part_size){ ++ kernel_part_size = (kernel_part_size & 0xffff0000); ++ //printk(KERN_INFO "Configuring partition sizes total flash 0x%.08X - kernel 0x%.08X - rootfs 0x%.08X\n", mymtd->size, kernel_part_size, mymtd->size - kernel_part_size); ++ axis_default_partitions[0].size = kernel_part_size; ++ axis_default_partitions[1].size = mymtd->size - axis_default_partitions[0].size; ++ axis_default_partitions[1].offset = axis_default_partitions[0].size; ++ } + + if (mymtd) { + mymtd->owner = THIS_MODULE; +@@ -527,7 +558,7 @@ + + if (mymtd) { + if (use_default_ptable) { +- printk(KERN_INFO " Using default partition table.\n"); ++ printk(KERN_INFO " Using ACME partition table.\n"); + err = add_mtd_partitions(mymtd, axis_default_partitions, + NUM_DEFAULT_PARTITIONS); + } else { diff --git a/target/linux/etrax/patches/cris/015-samsung-flash-chip.patch b/target/linux/etrax/patches/cris/015-samsung-flash-chip.patch new file mode 100644 index 0000000000..0c87fb995c --- /dev/null +++ b/target/linux/etrax/patches/cris/015-samsung-flash-chip.patch @@ -0,0 +1,13 @@ +diff -urN linux-2.6.19.2.orig/drivers/mtd/chips/cfi_cmdset_0002.c linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c +--- linux-2.6.19.2.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-05-30 21:23:01.000000000 +0200 ++++ linux-2.6.19.2/drivers/mtd/chips/cfi_cmdset_0002.c 2007-05-30 21:38:13.000000000 +0200 +@@ -291,8 +291,7 @@ + kfree(mtd); + return NULL; + } +- +- if (extp->MajorVersion != '1' || ++ if (extp->MajorVersion < '0' || extp->MajorVersion > '3' || + (extp->MinorVersion < '0' || extp->MinorVersion > '4')) { + if (cfi->mfr == MANUFACTURER_SAMSUNG && + (extp->MajorVersion == '3' && extp->MinorVersion == '3')) { diff --git a/target/linux/etrax/patches/cris/016-auto-detect-ram.patch b/target/linux/etrax/patches/cris/016-auto-detect-ram.patch new file mode 100644 index 0000000000..51930f2ce2 --- /dev/null +++ b/target/linux/etrax/patches/cris/016-auto-detect-ram.patch @@ -0,0 +1,101 @@ +diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S +--- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-06-01 00:37:57.000000000 +0200 ++++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings.S 2007-06-01 00:34:55.000000000 +0200 +@@ -62,3 +62,5 @@ + .dword 0 ; No more register values + .ascii "ACME_PART_MAGIC" ; Magic number + .dword 0xdeadc0de ++ .ascii "ACME_RAM_MAGIC" ; Magic number ++ .dword 0x2000000 +diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_416.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S +--- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-06-01 00:37:57.000000000 +0200 ++++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_416.S 2007-06-01 00:34:55.000000000 +0200 +@@ -62,3 +62,5 @@ + .dword 0 ; No more register values + .ascii "ACME_PART_MAGIC" ; Magic number + .dword 0xdeadc0de ++ .ascii "ACME_RAM_MAGIC" ; Magic number ++ .dword 0x1000000 +diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_816.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S +--- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-06-01 00:37:57.000000000 +0200 ++++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_816.S 2007-06-01 00:34:55.000000000 +0200 +@@ -62,3 +62,5 @@ + .dword 0 ; No more register values + .ascii "ACME_PART_MAGIC" ; Magic number + .dword 0xdeadc0de ++ .ascii "ACME_RAM_MAGIC" ; Magic number ++ .dword 0x1000000 +diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_832.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S +--- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-06-01 00:37:57.000000000 +0200 ++++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_832.S 2007-06-01 00:34:55.000000000 +0200 +@@ -62,3 +62,5 @@ + .dword 0 ; No more register values + .ascii "ACME_PART_MAGIC" ; Magic number + .dword 0xdeadc0de ++ .ascii "ACME_RAM_MAGIC" ; Magic number ++ .dword 0x2000000 +diff -urN linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S +--- linux-2.6.19.2//arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-06-01 00:37:57.000000000 +0200 ++++ /tmp/linux-2.6.19.2/arch/cris/arch-v10/boot/compressed/hw_settings_MCM.S 2007-06-01 00:34:55.000000000 +0200 +@@ -62,3 +62,5 @@ + .dword 0 ; No more register values + .ascii "ACME_PART_MAGIC" ; Magic number + .dword 0xdeadc0de ++ .ascii "ACME_RAM_MAGIC" ; Magic number ++ .dword 0x1000000 +--- linux-2.6.19.2//arch/cris/kernel/setup.c 2007-06-01 00:37:55.000000000 +0200 ++++ /tmp/linux-2.6.19.2/arch/cris/kernel/setup.c 2007-06-01 00:34:55.000000000 +0200 +@@ -55,6 +55,13 @@ + * boot code and the system. + * + */ ++#ifdef CONFIG_CRIS_LOW_MAP ++#define FLASH_UNCACHED_ADDR KSEG_8 ++#define FLASH_CACHED_ADDR KSEG_5 ++#else ++#define FLASH_UNCACHED_ADDR KSEG_E ++#define FLASH_CACHED_ADDR KSEG_F ++#endif + + void __init + setup_arch(char **cmdline_p) +@@ -63,15 +70,37 @@ + unsigned long bootmap_size; + unsigned long start_pfn, max_pfn; + unsigned long memory_start; +- ++ unsigned int ram_size = 0; ++ unsigned char *flash_mem = (unsigned char*)(FLASH_CACHED_ADDR); ++ unsigned int ram_scan_count = 0; ++ const char *ram_magic = "ACME_RAM_MAGIC"; ++ unsigned int magic_len = strlen(ram_magic); ++ unsigned long dend; + /* register an initial console printing routine for printk's */ + + init_etrax_debug(); + + /* we should really poll for DRAM size! */ ++ printk(KERN_INFO "Determinig RAM size\n"); ++ for(ram_scan_count = 0; ram_scan_count < 100000; ram_scan_count++){ ++ if(strncmp(&flash_mem[ram_scan_count], ram_magic, magic_len - 1) == 0){ ++ ram_size = flash_mem[ram_scan_count + magic_len ]; ++ ram_size <<= 8; ++ ram_size += flash_mem[ram_scan_count + magic_len + 2]; ++ ram_size <<= 8; ++ ram_size += flash_mem[ram_scan_count + magic_len + 1]; ++ ram_size <<= 8; ++ ram_size += flash_mem[ram_scan_count + magic_len + 3]; ++ printk(KERN_INFO "RAM size is %uMB\n", 16 * ram_size); ++ ram_scan_count = 1100000; ++ } ++ } + + high_memory = &dram_end; +- ++ dend = dram_start + 16 * 1024 * 1024 * ram_size; ++ if(ram_size == 1){ ++ high_memory = 0xc1000000; ++ } + if(romfs_in_flash || !romfs_length) { + /* if we have the romfs in flash, or if there is no rom filesystem, + * our free area starts directly after the BSS diff --git a/target/linux/etrax/patches/cris/017-uclibc-swab.patch b/target/linux/etrax/patches/cris/017-uclibc-swab.patch new file mode 100644 index 0000000000..e9f14e44e4 --- /dev/null +++ b/target/linux/etrax/patches/cris/017-uclibc-swab.patch @@ -0,0 +1,50 @@ +Binary files linux-2.6.19.2.orig/include/linux/byteorder/.swab.h.swp and linux-2.6.19.2/include/linux/byteorder/.swab.h.swp differ +diff -urN linux-2.6.19.2.orig/include/linux/byteorder/swab.h linux-2.6.19.2/include/linux/byteorder/swab.h +--- linux-2.6.19.2.orig/include/linux/byteorder/swab.h 2007-06-02 03:13:27.000000000 +0200 ++++ linux-2.6.19.2/include/linux/byteorder/swab.h 2007-06-02 03:14:52.000000000 +0200 +@@ -20,6 +20,8 @@ + /* casts are necessary for constants, because we never know how for sure + * how U/UL/ULL map to __u16, __u32, __u64. At least not in a portable way. + */ ++ ++#ifndef _BITS_BYTESWAP_H + #define ___swab16(x) \ + ({ \ + __u16 __x = (x); \ +@@ -37,6 +39,8 @@ + (((__u32)(__x) & (__u32)0x00ff0000UL) >> 8) | \ + (((__u32)(__x) & (__u32)0xff000000UL) >> 24) )); \ + }) ++#endif ++ + + #define ___swab64(x) \ + ({ \ +@@ -129,11 +133,13 @@ + # define __swab64(x) __fswab64(x) + #endif /* OPTIMIZE */ + +- ++#ifndef _BITS_BYTESWAP_H + static __inline__ __attribute_const__ __u16 __fswab16(__u16 x) + { + return __arch__swab16(x); + } ++#endif ++ + static __inline__ __u16 __swab16p(const __u16 *x) + { + return __arch__swab16p(x); +@@ -143,10 +149,12 @@ + __arch__swab16s(addr); + } + ++#ifndef _BITS_BYTESWAP_H + static __inline__ __attribute_const__ __u32 __fswab32(__u32 x) + { + return __arch__swab32(x); + } ++#endif + static __inline__ __u32 __swab32p(const __u32 *x) + { + return __arch__swab32p(x); diff --git a/target/linux/etrax/patches/cris/018-reboot.patch b/target/linux/etrax/patches/cris/018-reboot.patch new file mode 100644 index 0000000000..b9d138373f --- /dev/null +++ b/target/linux/etrax/patches/cris/018-reboot.patch @@ -0,0 +1,10 @@ +--- linux-2.6.19.2.orig/kernel/sys.c 2007-06-04 22:00:44.000000000 +0200 ++++ linux-2.6.19.2/kernel/sys.c 2007-06-04 22:02:06.000000000 +0200 +@@ -829,6 +829,7 @@ + break; + + case LINUX_REBOOT_CMD_CAD_ON: ++ kernel_restart(NULL); + C_A_D = 1; + break; + diff --git a/target/linux/etrax/patches/cris/020-syscalls.patch b/target/linux/etrax/patches/cris/020-syscalls.patch new file mode 100644 index 0000000000..5e674a6232 --- /dev/null +++ b/target/linux/etrax/patches/cris/020-syscalls.patch @@ -0,0 +1,166 @@ +diff -urN linux-2.6.19.2.orig/include/asm-cris/unistd.h linux-2.6.19.2/include/asm/unistd.h +--- linux-2.6.19.2.orig/include/asm-cris/unistd.h 2007-06-16 23:59:11.000000000 +0200 ++++ linux-2.6.19.2/include/asm/unistd.h 2007-06-17 03:43:10.000000000 +0200 +@@ -325,9 +325,52 @@ + #define __NR_getcpu 318 + #define __NR_epoll_pwait 319 + ++#ifdef CONFIG_ETRAX_GPIO ++ #ifdef CONFIG_FOXBONE ++ #define __NR_gpiosetbits 320 ++ #define __NR_gpioclearbits 321 ++ #define __NR_gpiosetdir 322 ++ #define __NR_gpiotogglebit 323 ++ #define __NR_gpiogetbits 324 ++ #define __NR_foxboneread 325 ++ #define __NR_foxbonewrite 326 ++ #define __NR_foxbonebulkread 327 ++ #define __NR_foxbonebulkwrite 328 ++ #define __NR_foxbonereset 329 ++ #define __NR_foxboneintreg 330 ++ #define __NR_foxboneintcheck 331 ++ #define __NR_foxboneintwait 332 ++ #define NR_syscalls 333 ++ ++ #else ++ #define __NR_gpiosetbits 320 ++ #define __NR_gpioclearbits 321 ++ #define __NR_gpiosetdir 322 ++ #define __NR_gpiotogglebit 323 ++ #define __NR_gpiogetbits 324 ++ ++ #define NR_syscalls 325 ++ #endif ++#else ++ #ifdef CONFIG_FOXBONE ++ #define __NR_foxboneread 320 ++ #define __NR_foxbonewrite 321 ++ #define __NR_foxbonebulkread 322 ++ #define __NR_foxbonebulkwrite 323 ++ #define __NR_foxboneintreg 324 ++ #define __NR_foxboneintcheck 325 ++ #define __NR_foxboneintwait 326 ++ ++ #define NR_syscalls 327 ++ ++ #else ++ ++ #define NR_syscalls 320 ++ #endif ++#endif ++ + #ifdef __KERNEL__ + +-#define NR_syscalls 320 + + #include <asm/arch/unistd.h> + +--- linux-2.6.19.2.orig/include/linux/gpio_syscalls.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.19.2/include/linux/gpio_syscalls.h 2007-06-17 03:44:49.000000000 +0200 +@@ -0,0 +1,75 @@ ++#ifndef __LINUX_SYSCALL_GPIO ++#define __LINUX_SYSCALL_GPIO ++#include <linux/autoconf.h> ++#include <linux/kernel.h> ++#include <linux/errno.h> ++#include <asm/unistd.h> ++ ++// port defines ++#define PORTA 'A' ++#define PORTB 'B' ++#define PORTG 'G' ++ ++//direction defines ++#define DIRIN 'I' ++#define DIROUT 'O' ++ ++// pin defines for PORTG ++#define PG0 (1<<0) ++#define PG1 (1<<1) ++#define PG2 (1<<2) ++#define PG3 (1<<3) ++#define PG4 (1<<4) ++#define PG5 (1<<5) ++#define PG6 (1<<6) ++#define PG7 (1<<7) ++#define PG8 (1<<8) ++#define PG9 (1<<9) ++#define PG10 (1<<10) ++#define PG11 (1<<11) ++#define PG12 (1<<12) ++#define PG13 (1<<13) ++#define PG14 (1<<14) ++#define PG15 (1<<15) ++#define PG16 (1<<16) ++#define PG17 (1<<17) ++#define PG18 (1<<18) ++#define PG19 (1<<19) ++#define PG20 (1<<20) ++#define PG21 (1<<21) ++#define PG22 (1<<22) ++#define PG23 (1<<23) ++#define PG24 (1<<24) ++ ++#define PG8_15 0x00ff00 ++#define PG16_23 0xff0000 ++ ++ ++// pin defines for PORTA ++#define PA0 (1<<0) ++#define PA1 (1<<1) ++#define PA2 (1<<2) ++#define PA3 (1<<3) ++#define PA4 (1<<4) ++#define PA5 (1<<5) ++#define PA6 (1<<6) ++#define PA7 (1<<7) ++ ++// pin defines for PORTB ++#define PB0 (1<<0) ++#define PB1 (1<<1) ++#define PB2 (1<<2) ++#define PB3 (1<<3) ++#define PB4 (1<<4) ++#define PB5 (1<<5) ++#define PB6 (1<<6) ++#define PB7 (1<<7) ++ ++int errno; ++_syscall2(void, gpiosetbits, unsigned char, port, unsigned int, bits); ++_syscall2(void, gpioclearbits, unsigned char, port, unsigned int, bits); ++_syscall3(void, gpiosetdir, unsigned char, port, unsigned char, dir, unsigned int, bits); ++_syscall2(void, gpiotogglebit, unsigned char, port, unsigned int, bits); ++_syscall2(unsigned int, gpiogetbits, unsigned char, port, unsigned int, bits); ++ ++#endif +--- linux-2.6.19.2.orig/arch/cris/arch-v10/kernel/entry.S 2007-06-16 23:58:14.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/kernel/entry.S 2007-06-17 03:48:21.000000000 +0200 +@@ -1200,6 +1200,23 @@ + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait ++#ifdef CONFIG_ETRAX_GPIO ++ .long sys_gpiosetbits ++ .long sys_gpioclearbits ++ .long sys_gpiosetdir ++ .long sys_gpiotogglebit ++ .long sys_gpiogetbits ++#endif ++#ifdef CONFIG_FOXBONE ++ .long sys_foxboneread ++ .long sys_foxbonewrite ++ .long sys_foxbonebulkread ++ .long sys_foxbonebulkwrite ++ .long sys_foxbonereset ++ .long sys_foxboneintreg ++ .long sys_foxboneintcheck ++ .long sys_foxboneintwait ++#endif + + /* + * NOTE!! This doesn't have to be exact - we just have +diff linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/Makefile linux-2.6.19.2/arch/cris/arch-v10/drivers/Makefile +--- linux-2.6.19.2.orig/arch/cris/arch-v10/drivers/Makefile 2007-06-16 23:58:14.000000000 +0200 ++++ linux-2.6.19.2/arch/cris/arch-v10/drivers/Makefile 2007-06-17 03:48:21.000000000 +0200 +8a9 +> obj-$(CONFIG_ETRAX_GPIO) += gpio_syscalls.o |