aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/etrax/patches/cris/002-arch-cris.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/etrax/patches/cris/002-arch-cris.patch')
-rw-r--r--target/linux/etrax/patches/cris/002-arch-cris.patch24914
1 files changed, 0 insertions, 24914 deletions
diff --git a/target/linux/etrax/patches/cris/002-arch-cris.patch b/target/linux/etrax/patches/cris/002-arch-cris.patch
deleted file mode 100644
index fa3b2e22a9..0000000000
--- a/target/linux/etrax/patches/cris/002-arch-cris.patch
+++ /dev/null
@@ -1,24914 +0,0 @@
-diff -urN linux-2.6.19.2.old/arch/cris/Kconfig linux-2.6.19.2.dev/arch/cris/Kconfig
---- linux-2.6.19.2.old/arch/cris/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/Kconfig 2007-01-17 18:17:18.000000000 +0100
-@@ -16,6 +16,10 @@
- config RWSEM_XCHGADD_ALGORITHM
- bool
-
-+config GENERIC_IOMAP
-+ bool
-+ default y
-+
- config GENERIC_FIND_NEXT_BIT
- bool
- default y
-@@ -42,6 +46,29 @@
-
- source "fs/Kconfig.binfmt"
-
-+config GENERIC_HARDIRQS
-+ bool
-+ default y
-+
-+config SMP
-+ bool "SMP"
-+ help
-+ SMP support. Always Say N.
-+
-+config NR_CPUS
-+ int
-+ depends on SMP
-+ default 2
-+
-+config SCHED_MC
-+ bool "Multi-core scheduler support"
-+ depends on SMP
-+ default y
-+ help
-+ Multi-core scheduler support improves the CPU scheduler's decision
-+ making when dealing with multi-core CPU chips at a cost of slightly
-+ increased overhead in some places. If unsure say N here.
-+
- config ETRAX_CMDLINE
- string "Kernel command line"
- default "root=/dev/mtdblock3"
-@@ -70,17 +97,11 @@
- timers).
- This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
-
--config PREEMPT
-- bool "Preemptible Kernel"
-- help
-- This option reduces the latency of the kernel when reacting to
-- real-time or interactive events by allowing a low priority process to
-- be preempted even if it is in kernel mode executing a system call.
-- This allows applications to run more reliably even when the system is
-- under load.
-+config OOM_REBOOT
-+ bool "Enable reboot at out of memory"
-
-- Say Y here if you are building a kernel for a desktop, embedded
-- or real-time system. Say N if you are unsure.
-+source "kernel/Kconfig.preempt"
-+source "kernel/Kconfig.sched"
-
- source mm/Kconfig
-
-@@ -107,6 +128,16 @@
- help
- Support the xsim ETRAX Simulator.
-
-+config ETRAXFS
-+ bool "ETRAX-FS-V32"
-+ help
-+ Support CRIS V32.
-+
-+config ETRAXFS_SIM
-+ bool "ETRAX-FS-V32-Simulator"
-+ help
-+ Support CRIS V32 VCS simualtor.
-+
- endchoice
-
- config ETRAX_ARCH_V10
-@@ -114,6 +145,11 @@
- default y if ETRAX100LX || ETRAX100LX_V2
- default n if !(ETRAX100LX || ETRAX100LX_V2)
-
-+config ETRAX_ARCH_V32
-+ bool
-+ default y if ETRAXFS || ETRAXFS_SIM
-+ default n if !(ETRAXFS || ETRAXFS_SIM)
-+
- config ETRAX_DRAM_SIZE
- int "DRAM size (dec, in MB)"
- default "8"
-@@ -121,12 +157,23 @@
- Size of DRAM (decimal in MB) typically 2, 8 or 16.
-
- config ETRAX_FLASH_BUSWIDTH
-- int "Buswidth of flash in bytes"
-+ int "Buswidth of NOR flash in bytes"
- default "2"
- help
-- Width in bytes of the Flash bus (1, 2 or 4). Is usually 2.
-+ Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
-
--source arch/cris/arch-v10/Kconfig
-+config ETRAX_NANDFLASH_BUSWIDTH
-+ int "Buswidth of NAND flash in bytes"
-+ default "1"
-+ help
-+ Width in bytes of the NAND flash (1 or 2).
-+
-+config ETRAX_FLASH1_SIZE
-+ int "FLASH1 size (dec, in MB. 0 = Unknown)"
-+ default "0"
-+
-+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
-+source arch/cris/arch/Kconfig
-
- endmenu
-
-@@ -134,7 +181,8 @@
-
- # bring in ETRAX built-in drivers
- menu "Drivers for built-in interfaces"
--source arch/cris/arch-v10/drivers/Kconfig
-+# arch/cris/arch is a symlink to correct arch (arch-v10 or arch-v32)
-+source arch/cris/arch/drivers/Kconfig
-
- endmenu
-
-@@ -181,6 +229,10 @@
-
- source "sound/Kconfig"
-
-+source "drivers/pcmcia/Kconfig"
-+
-+source "drivers/pci/Kconfig"
-+
- source "drivers/usb/Kconfig"
-
- source "arch/cris/Kconfig.debug"
-diff -urN linux-2.6.19.2.old/arch/cris/Kconfig.debug linux-2.6.19.2.dev/arch/cris/Kconfig.debug
---- linux-2.6.19.2.old/arch/cris/Kconfig.debug 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/Kconfig.debug 2005-10-31 09:48:02.000000000 +0100
-@@ -1,14 +1,15 @@
- menu "Kernel hacking"
-
-+source "lib/Kconfig.debug"
-+
- #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
-+
- config PROFILING
- bool "Kernel profiling support"
-
- config SYSTEM_PROFILER
- bool "System profiling support"
-
--source "lib/Kconfig.debug"
--
- config ETRAX_KGDB
- bool "Use kernel GDB debugger"
- depends on DEBUG_KERNEL
-diff -urN linux-2.6.19.2.old/arch/cris/Makefile linux-2.6.19.2.dev/arch/cris/Makefile
---- linux-2.6.19.2.old/arch/cris/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/Makefile 2006-11-29 17:05:40.000000000 +0100
-@@ -1,4 +1,4 @@
--# $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $
-+# $Id: Makefile,v 1.41 2006/11/29 16:05:40 ricardw Exp $
- # cris/Makefile
- #
- # This file is included by the global makefile so that you can add your own
-@@ -10,14 +10,11 @@
- # License. See the file "COPYING" in the main directory of this archive
- # for more details.
-
--# A bug in ld prevents us from having a (constant-value) symbol in a
--# "ORIGIN =" or "LENGTH =" expression.
--
- arch-y := v10
- arch-$(CONFIG_ETRAX_ARCH_V10) := v10
- arch-$(CONFIG_ETRAX_ARCH_V32) := v32
-
--# No config avaiable for make clean etc
-+# No config available for make clean etc
- ifneq ($(arch-y),)
- SARCH := arch-$(arch-y)
- else
-@@ -52,79 +49,58 @@
- # cris object files path
- OBJ_ARCH = $(objtree)/arch/$(ARCH)
-
--target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot
--target_boot_dir = $(OBJ_ARCH)/boot
--src_boot_dir = $(SRC_ARCH)/boot
--target_compressed_dir = $(OBJ_ARCH)/boot/compressed
--src_compressed_dir = $(SRC_ARCH)/boot/compressed
--target_rescue_dir = $(OBJ_ARCH)/boot/rescue
--src_rescue_dir = $(SRC_ARCH)/boot/rescue
--
--export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir
--
--vmlinux.bin: vmlinux
-- $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin
--
--timage: vmlinux.bin
-- cat vmlinux.bin cramfs.img >timage
--
--simimage: timage
-- cp vmlinux.bin simvmlinux.bin
--
--# the following will remake timage without compiling the kernel
--# it does of course require that all object files exist...
--
--cramfs:
--## cramfs - Creates a cramfs image
-- mkcramfs -b 8192 -m romfs_meta.txt root cramfs.img
-- cat vmlinux.bin cramfs.img >timage
--
--clinux: vmlinux.bin decompress.bin rescue.bin
--
--decompress.bin: $(target_boot_dir)
-- @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin
--
--$(target_rescue_dir)/rescue.bin: $(target_boot_dir)
-- @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin
-+boot := arch/$(ARCH)/boot
-+MACHINE := arch/$(ARCH)/$(SARCH)
-
--zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin
--## zImage - Compressed kernel (gzip)
-- @$(MAKE) -f $(src_boot_dir)/Makefile zImage
-+all: zImage
-
--$(target_boot_dir): $(target_boot_arch_dir)
-- ln -sfn $< $@
--
--$(target_boot_arch_dir):
-- mkdir -p $@
--
--compressed: zImage
--
--archmrproper:
--archclean:
-- @if [ -d arch/$(ARCH)/boot ]; then \
-- $(MAKE) $(clean)=arch/$(ARCH)/boot ; \
-- fi
-- rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
-- rm -rf $(LD_SCRIPT).tmp
-+zImage Image: vmlinux
-+ $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
-
- archprepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch
-
- # Create some links to make all tools happy
- $(SRC_ARCH)/.links:
- @rm -rf $(SRC_ARCH)/drivers
-- @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers
-+ @ln -sfn $(SARCH)/drivers $(SRC_ARCH)/drivers
- @rm -rf $(SRC_ARCH)/boot
-- @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot
-+ @ln -sfn $(SARCH)/boot $(SRC_ARCH)/boot
- @rm -rf $(SRC_ARCH)/lib
-- @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
-- @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
-- @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
-- @ln -sfn $(SRC_ARCH)/$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
-+ @ln -sfn $(SARCH)/lib $(SRC_ARCH)/lib
-+ @rm -rf $(SRC_ARCH)/arch
-+ @ln -sfn $(SARCH) $(SRC_ARCH)/arch
-+ @rm -rf $(SRC_ARCH)/kernel/vmlinux.lds.S
-+ @ln -sfn ../$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
-+ @rm -rf $(SRC_ARCH)/kernel/asm-offsets.c
-+ @ln -sfn ../$(SARCH)/kernel/asm-offsets.c $(SRC_ARCH)/kernel/asm-offsets.c
- @touch $@
-
- # Create link to sub arch includes
- $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
-- @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink'
-+ @echo ' SYMLINK include/asm-$(ARCH)/arch -> include/asm-$(ARCH)/$(SARCH)'
- @rm -f include/asm-$(ARCH)/arch
-- @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch
-+ @ln -sf $(SARCH) $(srctree)/include/asm-$(ARCH)/arch
- @touch $@
-+
-+archclean:
-+ $(Q)if [ -e arch/$(ARCH)/boot ]; then \
-+ $(MAKE) $(clean)=arch/$(ARCH)/boot; \
-+ fi
-+
-+CLEAN_FILES += \
-+ $(MACHINE)/boot/zImage \
-+ $(SRC_ARCH)/.links \
-+ $(srctree)/include/asm-$(ARCH)/.arch
-+
-+MRPROPER_FILES += \
-+ $(SRC_ARCH)/drivers \
-+ $(SRC_ARCH)/boot \
-+ $(SRC_ARCH)/lib \
-+ $(SRC_ARCH)/arch \
-+ $(SRC_ARCH)/kernel/vmlinux.lds.S \
-+ $(SRC_ARCH)/kernel/asm-offsets.c
-+
-+define archhelp
-+ echo '* zImage - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
-+ echo '* Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
-+endef
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/README.mm linux-2.6.19.2.dev/arch/cris/arch-v10/README.mm
---- linux-2.6.19.2.old/arch/cris/arch-v10/README.mm 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/README.mm 2005-08-23 11:44:32.000000000 +0200
-@@ -3,6 +3,9 @@
- HISTORY:
-
- $Log: README.mm,v $
-+Revision 1.2 2005/08/23 09:44:32 starvik
-+extern inline -> static inline. Patch provided by Adrian Bunk <bunk@stusta.de>
-+
- Revision 1.1 2001/12/17 13:59:27 bjornw
- Initial revision
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/Makefile 2006-11-29 17:05:40.000000000 +0100
-@@ -1,13 +1,21 @@
- #
--# arch/cris/boot/Makefile
-+# arch/cris/arch-v10/boot/Makefile
- #
--target = $(target_boot_dir)
--src = $(src_boot_dir)
-
--zImage: compressed/vmlinuz
-+OBJCOPY = objcopy-cris
-+OBJCOPYFLAGS = -O binary --remove-section=.bss
-
--compressed/vmlinuz:
-- @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz
-+subdir- := compressed rescue
-+targets := Image
-
--clean:
-- @$(MAKE) -f $(src)/compressed/Makefile clean
-+$(obj)/Image: vmlinux FORCE
-+ $(call if_changed,objcopy)
-+ @echo ' Kernel: $@ is ready'
-+
-+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-+ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-+
-+$(obj)/zImage: $(obj)/compressed/vmlinux
-+ @cp $< $@
-+ @echo ' Kernel: $@ is ready'
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/Makefile 2006-10-11 17:47:04.000000000 +0200
-@@ -1,45 +1,34 @@
- #
--# create a compressed vmlinuz image from the binary vmlinux.bin file
-+# arch/cris/arch-v10/boot/compressed/Makefile
- #
--target = $(target_compressed_dir)
--src = $(src_compressed_dir)
-
- CC = gcc-cris -melf $(LINUXINCLUDE)
- CFLAGS = -O2
- LD = ld-cris
-+LDFLAGS = -T $(obj)/decompress.ld
-+OBJECTS = $(obj)/head.o $(obj)/misc.o
- OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
--OBJECTS = $(target)/head.o $(target)/misc.o
-
--# files to compress
--SYSTEM = $(objtree)/vmlinux.bin
-+quiet_cmd_image = BUILD $@
-+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
--all: $(target_compressed_dir)/vmlinuz
-+targets := vmlinux piggy.gz decompress.o decompress.bin
-
--$(target)/decompress.bin: $(OBJECTS)
-- $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
-- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
-+$(obj)/decompress.o: $(OBJECTS) FORCE
-+ $(call if_changed,ld)
-
--# Create vmlinuz image in top-level build directory
--$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
-- @echo " COMPR vmlinux.bin --> vmlinuz"
-- @cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz
-- @rm -f piggy.img
-+$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-+ $(call if_changed,objcopy)
-
--$(target)/head.o: $(src)/head.S
-- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-+$(obj)/head.o: $(obj)/head.S .config
-+ @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-
--$(target)/misc.o: $(src)/misc.c
-- $(CC) -D__KERNEL__ -c $< -o $@
-+$(obj)/misc.o: $(obj)/misc.c .config
-+ @$(CC) -D__KERNEL__ -c $< -o $@
-
--# gzip the kernel image
--
--piggy.img: $(SYSTEM)
-- @cat $(SYSTEM) | gzip -f -9 > piggy.img
--
--$(target):
-- mkdir -p $(target)
--
--clean:
-- rm -f piggy.img $(objtree)/vmlinuz
-+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-+ $(call if_changed,image)
-
-+$(obj)/piggy.gz: $(obj)/../Image FORCE
-+ $(call if_changed,gzip)
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/misc.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/compressed/misc.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/compressed/misc.c 2006-10-13 14:43:10.000000000 +0200
-@@ -1,7 +1,7 @@
- /*
- * misc.c
- *
-- * $Id: misc.c,v 1.6 2003/10/27 08:04:31 starvik Exp $
-+ * $Id: misc.c,v 1.7 2006/10/13 12:43:10 starvik Exp $
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/Makefile 2006-11-30 11:42:39.000000000 +0100
-@@ -1,56 +1,38 @@
- #
--# Makefile for rescue code
-+# Makefile for rescue (bootstrap) code
- #
--target = $(target_rescue_dir)
--src = $(src_rescue_dir)
-
- CC = gcc-cris -mlinux $(LINUXINCLUDE)
- CFLAGS = -O2
--LD = gcc-cris -mlinux -nostdlib
-+AFLAGS = -traditional
-+LD = gcc-cris -mlinux -nostdlib
-+LDFLAGS = -T $(obj)/rescue.ld
- OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
-+obj-y = head.o
-+OBJECT = $(obj)/$(obj-y)
-
--all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin
-+targets := rescue.o rescue.bin
-
--$(target)/rescue.bin: $(target) $(target)/head.o
-- $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
-- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
--# Place a copy in top-level build directory
-- cp -p $(target)/rescue.bin $(objtree)
-+$(obj)/rescue.o: $(OBJECT) FORCE
-+ $(call if_changed,ld)
-
--$(target)/testrescue.bin: $(target) $(target)/testrescue.o
-- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin
-+$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-+ $(call if_changed,objcopy)
-+ cp -p $(obj)/rescue.bin $(objtree)
-+
-+$(obj)/testrescue.bin: $(obj)/testrescue.o
-+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/testrescue.o tr.bin
- # Pad it to 784 bytes
- dd if=/dev/zero of=tmp2423 bs=1 count=784
- cat tr.bin tmp2423 >testrescue_tmp.bin
-- dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784
-+ dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
- rm tr.bin tmp2423 testrescue_tmp.bin
-
--$(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o
-- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin
-+$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
-+ $(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
- # Pad it to 784 bytes, that's what the rescue loader expects
- dd if=/dev/zero of=tmp2423 bs=1 count=784
- cat ktr.bin tmp2423 >kimagerescue_tmp.bin
-- dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784
-+ dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
- rm ktr.bin tmp2423 kimagerescue_tmp.bin
--
--$(target):
-- mkdir -p $(target)
--
--$(target)/head.o: $(src)/head.S
-- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
--
--$(target)/testrescue.o: $(src)/testrescue.S
-- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
--
--$(target)/kimagerescue.o: $(src)/kimagerescue.S
-- $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
--
--clean:
-- rm -f $(target)/*.o $(target)/*.bin
--
--fastdep:
--
--modules:
--
--modules-install:
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/head.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/head.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/head.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/head.S 2006-10-13 14:43:10.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: head.S,v 1.7 2005/03/07 12:11:06 starvik Exp $
-+/* $Id: head.S,v 1.9 2006/10/13 12:43:10 starvik Exp $
- *
- * Rescue code, made to reside at the beginning of the
- * flash-memory. when it starts, it checks a partition
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/kimagerescue.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/kimagerescue.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/kimagerescue.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/kimagerescue.S 2006-11-29 17:05:41.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: kimagerescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+/* $Id: kimagerescue.S,v 1.3 2006/11/29 16:05:41 ricardw Exp $
- *
- * Rescue code to be prepended on a kimage and copied to the
- * rescue serial port.
-@@ -7,7 +7,7 @@
- */
-
- #define ASSEMBLER_MACROS_ONLY
--#include <asm/sv_addr_ag.h>
-+#include <asm/arch/sv_addr_ag.h>
-
- #define CODE_START 0x40004000
- #define CODE_LENGTH 784
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/testrescue.S linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/testrescue.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/boot/rescue/testrescue.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/boot/rescue/testrescue.S 2006-11-29 17:05:41.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: testrescue.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+/* $Id: testrescue.S,v 1.2 2006/11/29 16:05:41 ricardw Exp $
- *
- * Simple testcode to download by the rescue block.
- * Just lits some LEDs to show it was downloaded correctly.
-@@ -7,7 +7,7 @@
- */
-
- #define ASSEMBLER_MACROS_ONLY
--#include <asm/sv_addr_ag.h>
-+#include <asm/arch/sv_addr_ag.h>
-
- .text
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/defconfig linux-2.6.19.2.dev/arch/cris/arch-v10/defconfig
---- linux-2.6.19.2.old/arch/cris/arch-v10/defconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/defconfig 2006-01-03 15:48:23.000000000 +0100
-@@ -106,7 +106,6 @@
- CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y
- # CONFIG_ETRAX_I2C_EEPROM is not set
- CONFIG_ETRAX_GPIO=y
--CONFIG_ETRAX_PA_BUTTON_BITMASK=02
- CONFIG_ETRAX_PA_CHANGEABLE_DIR=00
- CONFIG_ETRAX_PA_CHANGEABLE_BITS=FF
- CONFIG_ETRAX_PB_CHANGEABLE_DIR=00
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Kconfig
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Kconfig 2007-01-09 10:29:18.000000000 +0100
-@@ -6,6 +6,12 @@
- This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
- controller.
-
-+config ETRAX_NO_PHY
-+ bool "PHY not present"
-+ depends on ETRAX_ETHERNET
-+ help
-+ Enable if PHY is not present.
-+
- choice
- prompt "Network LED behavior"
- depends on ETRAX_ETHERNET
-@@ -90,7 +96,7 @@
-
- config ETRAX_SERIAL_PORT0_DMA6_OUT
- bool "DMA 6"
--
-+ depends on !ETRAX_DEBUG_PORT0
- endchoice
-
- choice
-@@ -103,7 +109,7 @@
-
- config ETRAX_SERIAL_PORT0_DMA7_IN
- bool "DMA 7"
--
-+ depends on !ETRAX_DEBUG_PORT0
- endchoice
-
- choice
-@@ -204,7 +210,7 @@
-
- config ETRAX_SERIAL_PORT1_DMA8_OUT
- bool "DMA 8"
--
-+ depends on !ETRAX_DEBUG_PORT1
- endchoice
-
- choice
-@@ -217,7 +223,7 @@
-
- config ETRAX_SERIAL_PORT1_DMA9_IN
- bool "DMA 9"
--
-+ depends on !ETRAX_DEBUG_PORT1
- endchoice
-
- choice
-@@ -321,7 +327,7 @@
-
- config ETRAX_SERIAL_PORT2_DMA2_OUT
- bool "DMA 2"
--
-+ depends on !ETRAX_DEBUG_PORT2
- endchoice
-
- choice
-@@ -334,7 +340,7 @@
-
- config ETRAX_SERIAL_PORT2_DMA3_IN
- bool "DMA 3"
--
-+ depends on !ETRAX_DEBUG_PORT2
- endchoice
-
- choice
-@@ -435,7 +441,7 @@
-
- config ETRAX_SERIAL_PORT3_DMA4_OUT
- bool "DMA 4"
--
-+ depends on !ETRAX_DEBUG_PORT3
- endchoice
-
- choice
-@@ -448,7 +454,7 @@
-
- config ETRAX_SERIAL_PORT3_DMA5_IN
- bool "DMA 5"
--
-+ depends on !ETRAX_DEBUG_PORT3
- endchoice
-
- choice
-@@ -514,8 +520,7 @@
- bool "RS-485 support"
- depends on ETRAX_SERIAL
- help
-- Enables support for RS-485 serial communication. For a primer on
-- RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
-+ Enables support for RS-485 serial communication.
-
- config ETRAX_RS485_ON_PA
- bool "RS-485 mode on PA"
-@@ -541,6 +546,27 @@
- loopback. Not all products are able to do this in software only.
- Axis 2400/2401 must disable receiver.
-
-+config ETRAX_SYNCHRONOUS_SERIAL
-+ bool "Synchronous serial port driver"
-+ help
-+ Select this to enable the synchronous serial port driver.
-+
-+config ETRAX_SYNCHRONOUS_SERIAL_PORT0
-+ bool "Synchronous serial port 0 enabled (sser1)"
-+ depends on ETRAX_SYNCHRONOUS_SERIAL
-+
-+config ETRAX_SYNCHRONOUS_SERIAL0_DMA
-+ bool "Use DMA for synchronous serial port 0"
-+ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
-+
-+config ETRAX_SYNCHRONOUS_SERIAL_PORT1
-+ bool "Synchronous serial port 1 enabled (sser3)"
-+ depends on ETRAX_SYNCHRONOUS_SERIAL
-+
-+config ETRAX_SYNCHRONOUS_SERIAL1_DMA
-+ bool "Use DMA for synchronous serial port 1"
-+ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
-+
- config ETRAX_IDE
- bool "ATA/IDE support"
- select IDE
-@@ -604,8 +630,7 @@
- select MTD
- select MTD_CFI
- select MTD_CFI_AMDSTD
-- select MTD_OBSOLETE_CHIPS
-- select MTD_AMDSTD
-+ select MTD_JEDECPROBE
- select MTD_CHAR
- select MTD_BLOCK
- select MTD_PARTITIONS
-@@ -615,6 +640,15 @@
- This option enables MTD mapping of flash devices. Needed to use
- flash memories. If unsure, say Y.
-
-+config ETRAX_AXISFLASHMAP_MTD0WHOLE
-+ bool "MTD0 is whole boot flash device"
-+ depends on ETRAX_AXISFLASHMAP
-+ default N
-+ help
-+ When this option is not set, mtd0 refers to the first partition
-+ on the boot flash device. When set, mtd0 refers to the whole
-+ device, with mtd1 referring to the first partition etc.
-+
- config ETRAX_PTABLE_SECTOR
- int "Byte-offset of partition table sector"
- depends on ETRAX_AXISFLASHMAP
-@@ -715,19 +749,6 @@
- Remember that you need to setup the port directions appropriately in
- the General configuration.
-
--config ETRAX_PA_BUTTON_BITMASK
-- hex "PA-buttons bitmask"
-- depends on ETRAX_GPIO
-- default "02"
-- help
-- This is a bitmask with information about what bits on PA that
-- are used for buttons.
-- Most products has a so called TEST button on PA1, if that's true
-- use 02 here.
-- Use 00 if there are no buttons on PA.
-- If the bitmask is <> 00 a button driver will be included in the gpio
-- driver. ETRAX general I/O support must be enabled.
--
- config ETRAX_PA_CHANGEABLE_DIR
- hex "PA user changeable dir mask"
- depends on ETRAX_GPIO
-@@ -768,6 +789,40 @@
- Bit set = changeable.
- You probably want 00 here.
-
-+config ETRAX_DEF_R_PORT_G_DIR
-+ bool "Port G Output"
-+ help
-+ CONFIG_ETRAX_DEF_R_PORT_G_DIR:
-+ Set the direction of specified pins to output.
-+
-+config ETRAX_DEF_R_PORT_G0_DIR_OUT
-+ bool "G0"
-+ depends on ETRAX_DEF_R_PORT_G_DIR
-+ help
-+ CONFIG_ETRAX_DEF_R_PORT_G0_DIR_OUT:
-+ Set G0 to output.
-+
-+config ETRAX_DEF_R_PORT_G8_15_DIR_OUT
-+ bool "G8-G15"
-+ depends on ETRAX_DEF_R_PORT_G_DIR
-+ help
-+ CONFIG_ETRAX_DEF_R_PORT_G8_15_DIR_OUT:
-+ Set G8-G15 to output.
-+
-+config ETRAX_DEF_R_PORT_G16_23_DIR_OUT
-+ bool "G16-G23"
-+ depends on ETRAX_DEF_R_PORT_G_DIR
-+ help
-+ CONFIG_ETRAX_DEF_R_PORT_G16_23_DIR_OUT:
-+ Set G16-G23 to output.
-+
-+config ETRAX_DEF_R_PORT_G24_DIR_OUT
-+ bool "G24"
-+ depends on ETRAX_DEF_R_PORT_G_DIR
-+ help
-+ CONFIG_ETRAX_DEF_R_PORT_G24_DIR_OUT:
-+ Set G24 to output.
-+
- config ETRAX_RTC
- bool "Real Time Clock support"
- depends on ETRAX_ARCH_V10
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Makefile linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/Makefile 2005-12-12 10:05:46.000000000 +0100
-@@ -8,5 +8,5 @@
- obj-$(CONFIG_ETRAX_GPIO) += gpio.o
- obj-$(CONFIG_ETRAX_DS1302) += ds1302.o
- obj-$(CONFIG_ETRAX_PCF8563) += pcf8563.o
--
-+obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/axisflashmap.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/axisflashmap.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/axisflashmap.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/axisflashmap.c 2006-11-22 13:26:55.000000000 +0100
-@@ -11,6 +11,26 @@
- * partition split defined below.
- *
- * $Log: axisflashmap.c,v $
-+ * Revision 1.17 2006/11/22 12:26:55 ricardw
-+ * Added CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE option which when enabled puts mtd0
-+ * as whole device, with first partition at mtd1, etc.
-+ *
-+ * Revision 1.16 2006/10/30 15:17:57 pkj
-+ * Avoid a compiler warning.
-+ *
-+ * Revision 1.15 2006/10/13 12:43:10 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.14 2006/08/30 13:20:00 karljope
-+ * Do not use deprecated amd_flash to probe flash memory.
-+ * Probe for flash chip with CFI first and if no chip was found try jedec_probe.
-+ *
-+ * Revision 1.13 2006/01/04 06:09:45 starvik
-+ * Merge of Linux 2.6.15
-+ *
-+ * Revision 1.12 2005/06/21 09:13:06 starvik
-+ * Change const char* to const char[] to save space (from domen@coderock.org).
-+ *
- * Revision 1.11 2004/11/15 10:27:14 starvik
- * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
- *
-@@ -300,6 +320,15 @@
- },
- };
-
-+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-+/* Main flash device */
-+static struct mtd_partition main_partition = {
-+ .name = "main",
-+ .size = 0,
-+ .offset = 0
-+};
-+#endif
-+
- /*
- * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
- * chips in that order (because the amd_flash-driver is faster).
-@@ -312,12 +341,12 @@
- "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
- map_cs->name, map_cs->size, map_cs->map_priv_1);
-
--#ifdef CONFIG_MTD_AMDSTD
-- mtd_cs = do_map_probe("amd_flash", map_cs);
--#endif
- #ifdef CONFIG_MTD_CFI
-+ mtd_cs = do_map_probe("cfi_probe", map_cs);
-+#endif
-+#ifdef CONFIG_MTD_JEDECPROBE
- if (!mtd_cs) {
-- mtd_cs = do_map_probe("cfi_probe", map_cs);
-+ mtd_cs = do_map_probe("jedec_probe", map_cs);
- }
- #endif
-
-@@ -396,7 +425,7 @@
- struct partitiontable_head *ptable_head = NULL;
- struct partitiontable_entry *ptable;
- int use_default_ptable = 1; /* Until proven otherwise. */
-- const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n";
-+ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n";
-
- if (!(mymtd = flash_probe())) {
- /* There's no reason to use this module if no flash chip can
-@@ -491,6 +520,16 @@
- pidx++;
- }
-
-+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-+ if (mymtd) {
-+ main_partition.size = mymtd->size;
-+ err = add_mtd_partitions(mymtd, &main_partition, 1);
-+ if (err)
-+ panic("axisflashmap: Could not initialize "
-+ "partition for whole main mtd device!\n");
-+ }
-+#endif
-+
- if (mymtd) {
- if (use_default_ptable) {
- printk(KERN_INFO " Using default partition table.\n");
-@@ -524,7 +563,7 @@
- }
-
- printk(KERN_INFO " Adding RAM partition for romfs image:\n");
-- printk(pmsg, pidx, romfs_start, romfs_length);
-+ printk(pmsg, pidx, (unsigned)romfs_start, (unsigned)romfs_length);
-
- err = mtdram_init_device(mtd_ram, (void*)romfs_start,
- romfs_length, "romfs");
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/ds1302.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/ds1302.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/ds1302.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/ds1302.c 2006-10-27 16:31:23.000000000 +0200
-@@ -6,136 +6,9 @@
- *!
- *! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
- *!
--*! $Log: ds1302.c,v $
--*! Revision 1.18 2005/01/24 09:11:26 mikaelam
--*! Minor changes to get DS1302 RTC chip driver to work
--*!
--*! Revision 1.17 2005/01/05 06:11:22 starvik
--*! No need to do local_irq_disable after local_irq_save.
--*!
--*! Revision 1.16 2004/12/13 12:21:52 starvik
--*! Added I/O and DMA allocators from Linux 2.4
--*!
--*! Revision 1.14 2004/08/24 06:48:43 starvik
--*! Whitespace cleanup
--*!
--*! Revision 1.13 2004/05/28 09:26:59 starvik
--*! Modified I2C initialization to work in 2.6.
--*!
--*! Revision 1.12 2004/05/14 07:58:03 starvik
--*! Merge of changes from 2.4
--*!
--*! Revision 1.10 2004/02/04 09:25:12 starvik
--*! Merge of Linux 2.6.2
--*!
--*! Revision 1.9 2003/07/04 08:27:37 starvik
--*! Merge of Linux 2.5.74
--*!
--*! Revision 1.8 2003/04/09 05:20:47 starvik
--*! Merge of Linux 2.5.67
--*!
--*! Revision 1.6 2003/01/09 14:42:51 starvik
--*! Merge of Linux 2.5.55
--*!
--*! Revision 1.4 2002/12/11 13:13:57 starvik
--*! Added arch/ to v10 specific includes
--*! Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
--*!
--*! Revision 1.3 2002/11/20 11:56:10 starvik
--*! Merge of Linux 2.5.48
--*!
--*! Revision 1.2 2002/11/18 13:16:06 starvik
--*! Linux 2.5 port of latest 2.4 drivers
--*!
--*! Revision 1.15 2002/10/11 16:14:33 johana
--*! Added CONFIG_ETRAX_DS1302_TRICKLE_CHARGE and initial setting of the
--*! trcklecharge register.
--*!
--*! Revision 1.14 2002/10/10 12:15:38 magnusmn
--*! Added support for having the RST signal on bit g0
--*!
--*! Revision 1.13 2002/05/29 15:16:08 johana
--*! Removed unused variables.
--*!
--*! Revision 1.12 2002/04/10 15:35:25 johana
--*! Moved probe function closer to init function and marked it __init.
--*!
--*! Revision 1.11 2001/06/14 12:35:52 jonashg
--*! The ATA hack is back. It is unfortunately the only way to set g27 to output.
--*!
--*! Revision 1.9 2001/06/14 10:00:14 jonashg
--*! No need for tempudelay to be inline anymore (had to adjust the usec to
--*! loops conversion because of this to make it slow enough to be a udelay).
--*!
--*! Revision 1.8 2001/06/14 08:06:32 jonashg
--*! Made tempudelay delay usecs (well, just a tad more).
--*!
--*! Revision 1.7 2001/06/13 14:18:11 jonashg
--*! Only allow processes with SYS_TIME capability to set time and charge.
--*!
--*! Revision 1.6 2001/06/12 15:22:07 jonashg
--*! * Made init function __init.
--*! * Parameter to out_byte() is unsigned char.
--*! * The magic number 42 has got a name.
--*! * Removed comment about /proc (nothing is exported there).
--*!
--*! Revision 1.5 2001/06/12 14:35:13 jonashg
--*! Gave the module a name and added it to printk's.
--*!
--*! Revision 1.4 2001/05/31 14:53:40 jonashg
--*! Made tempudelay() inline so that the watchdog doesn't reset (see
--*! function comment).
--*!
--*! Revision 1.3 2001/03/26 16:03:06 bjornw
--*! Needs linux/config.h
--*!
--*! Revision 1.2 2001/03/20 19:42:00 bjornw
--*! Use the ETRAX prefix on the DS1302 options
--*!
--*! Revision 1.1 2001/03/20 09:13:50 magnusmn
--*! Linux 2.4 port
--*!
--*! Revision 1.10 2000/07/05 15:38:23 bjornw
--*! Dont update kernel time when a RTC_SET_TIME is done
--*!
--*! Revision 1.9 2000/03/02 15:42:59 macce
--*! * Hack to make RTC work on all 2100/2400
--*!
--*! Revision 1.8 2000/02/23 16:59:18 torbjore
--*! added setup of R_GEN_CONFIG when RTC is connected to the generic port.
--*!
--*! Revision 1.7 2000/01/17 15:51:43 johana
--*! Added RTC_SET_CHARGE ioctl to enable trickle charger.
--*!
--*! Revision 1.6 1999/10/27 13:19:47 bjornw
--*! Added update_xtime_from_cmos which reads back the updated RTC into the kernel.
--*! /dev/rtc calls it now.
--*!
--*! Revision 1.5 1999/10/27 12:39:37 bjornw
--*! Disabled superuser check. Anyone can now set the time.
--*!
--*! Revision 1.4 1999/09/02 13:27:46 pkj
--*! Added shadow for R_PORT_PB_CONFIG.
--*! Renamed port_g_shadow to port_g_data_shadow.
--*!
--*! Revision 1.3 1999/09/02 08:28:06 pkj
--*! Made it possible to select either port PB or the generic port for the RST
--*! signal line to the DS1302 RTC.
--*! Also make sure the RST bit is configured as output on Port PB (if used).
--*!
--*! Revision 1.2 1999/09/01 14:47:20 bjornw
--*! Added support for /dev/rtc operations with ioctl RD_TIME and SET_TIME to read
--*! and set the date. Register as major 121.
--*!
--*! Revision 1.1 1999/09/01 09:45:29 bjornw
--*! Implemented a DS1302 RTC driver.
--*!
--*!
- *! ---------------------------------------------------------------------------
- *!
--*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN
--*!
--*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
-+*! (C) Copyright 1999-2006 Axis Communications AB, LUND, SWEDEN
- *!
- *!***************************************************************************/
-
-@@ -305,14 +178,7 @@
- void
- ds1302_writereg(int reg, unsigned char val)
- {
--#ifndef CONFIG_ETRAX_RTC_READONLY
- int do_writereg = 1;
--#else
-- int do_writereg = 0;
--
-- if (reg == RTC_TRICKLECHARGER)
-- do_writereg = 1;
--#endif
-
- if (do_writereg) {
- ds1302_wenable();
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/eeprom.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/eeprom.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/eeprom.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/eeprom.c 2006-10-13 14:43:10.000000000 +0200
-@@ -20,6 +20,9 @@
- *! in the spin-lock.
- *!
- *! $Log: eeprom.c,v $
-+*! Revision 1.13 2006/10/13 12:43:10 starvik
-+*! Merge of 2.6.18
-+*!
- *! Revision 1.12 2005/06/19 17:06:46 starvik
- *! Merge of Linux 2.6.12.
- *!
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/gpio.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/gpio.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/gpio.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/gpio.c 2007-02-05 12:54:34.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $
-+/* $Id: gpio.c,v 1.28 2007/02/05 11:54:34 pkj Exp $
- *
- * Etrax general port I/O device
- *
-@@ -9,6 +9,40 @@
- * Johan Adolfsson (read/set directions, write, port G)
- *
- * $Log: gpio.c,v $
-+ * Revision 1.28 2007/02/05 11:54:34 pkj
-+ * Merge of Linux 2.6.19
-+ *
-+ * Revision 1.27 2006/12/12 11:08:30 edgar
-+ * In etrax_gpio_wake_up_check(), make flags unsigned long.
-+ *
-+ * Revision 1.26 2006/11/02 10:54:29 pkj
-+ * Restored unique device id for request_irq() which was lost in the
-+ * merge of 2.6.18.
-+ *
-+ * Revision 1.25 2006/10/13 12:43:10 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.24 2006/07/13 07:42:20 starvik
-+ * Set unique device id in request_irq
-+ *
-+ * Revision 1.23 2006/06/21 09:38:46 starvik
-+ * Use correct spinlock macros
-+ *
-+ * Revision 1.22 2005/08/29 07:32:16 starvik
-+ * Merge of 2.6.13
-+ *
-+ * Revision 1.21 2005/08/16 17:10:54 edgar
-+ * dont leave locked spinlocks when returning.
-+ *
-+ * Revision 1.20 2005/08/15 13:10:47 orjanf
-+ * Don't link struct into alarmlist until fully initialized.
-+ *
-+ * Revision 1.19 2005/07/13 11:43:11 karljope
-+ * Corrected typo
-+ *
-+ * Revision 1.18 2005/06/21 12:26:53 starvik
-+ * Improved alarm list locking.
-+ *
- * Revision 1.17 2005/06/19 17:06:46 starvik
- * Merge of Linux 2.6.12.
- *
-@@ -277,7 +311,7 @@
- unsigned int mask = 0;
- struct gpio_private *priv = (struct gpio_private *)file->private_data;
- unsigned long data;
-- spin_lock(&gpio_lock);
-+ spin_lock_irq(&gpio_lock);
- poll_wait(file, &priv->alarm_wq, wait);
- if (priv->minor == GPIO_MINOR_A) {
- unsigned long flags;
-@@ -297,15 +331,17 @@
- data = *R_PORT_PB_DATA;
- else if (priv->minor == GPIO_MINOR_G)
- data = *R_PORT_G_DATA;
-- else
-+ else {
-+ spin_unlock_irq(&gpio_lock);
- return 0;
-+ }
-
- if ((data & priv->highalarm) ||
- (~data & priv->lowalarm)) {
- mask = POLLIN|POLLRDNORM;
- }
-
-- spin_unlock(&gpio_lock);
-+ spin_unlock_irq(&gpio_lock);
-
- DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
-
-@@ -314,10 +350,12 @@
-
- int etrax_gpio_wake_up_check(void)
- {
-- struct gpio_private *priv = alarmlist;
-+ struct gpio_private *priv;
- unsigned long data = 0;
- int ret = 0;
-- spin_lock(&gpio_lock);
-+ unsigned long flags;
-+ spin_lock_irqsave(&gpio_lock, flags);
-+ priv = alarmlist;
- while (priv) {
- if (USE_PORTS(priv)) {
- data = *priv->port;
-@@ -332,12 +370,12 @@
- }
- priv = priv->next;
- }
-- spin_unlock(&gpio_lock);
-+ spin_unlock_irqrestore(&gpio_lock, flags);
- return ret;
- }
-
- static irqreturn_t
--gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+gpio_poll_timer_interrupt(int irq, void *dev_id)
- {
- if (gpio_some_alarms) {
- etrax_gpio_wake_up_check();
-@@ -347,7 +385,7 @@
- }
-
- static irqreturn_t
--gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+gpio_pa_interrupt(int irq, void *dev_id)
- {
- unsigned long tmp;
- spin_lock(&gpio_lock);
-@@ -376,9 +414,6 @@
- struct gpio_private *priv = (struct gpio_private *)file->private_data;
- unsigned char data, clk_mask, data_mask, write_msb;
- unsigned long flags;
--
-- spin_lock(&gpio_lock);
--
- ssize_t retval = count;
- if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
- return -EFAULT;
-@@ -394,6 +429,7 @@
- if (clk_mask == 0 || data_mask == 0) {
- return -EPERM;
- }
-+ spin_lock_irq(&gpio_lock);
- write_msb = priv->write_msb;
- D(printk("gpio_write: %lu to data 0x%02X clk 0x%02X msb: %i\n",count, data_mask, clk_mask, write_msb));
- while (count--) {
-@@ -425,7 +461,7 @@
- }
- }
- }
-- spin_unlock(&gpio_lock);
-+ spin_unlock_irq(&gpio_lock);
- return retval;
- }
-
-@@ -445,13 +481,12 @@
-
- if (!priv)
- return -ENOMEM;
-+ memset(priv, 0, sizeof(*priv));
-
- priv->minor = p;
-
-- /* initialize the io/alarm struct and link it into our alarmlist */
-+ /* initialize the io/alarm struct */
-
-- priv->next = alarmlist;
-- alarmlist = priv;
- if (USE_PORTS(priv)) { /* A and B */
- priv->port = ports[p];
- priv->shadow = shads[p];
-@@ -476,6 +511,12 @@
-
- filp->private_data = (void *)priv;
-
-+ /* link it into our alarmlist */
-+ spin_lock_irq(&gpio_lock);
-+ priv->next = alarmlist;
-+ alarmlist = priv;
-+ spin_unlock_irq(&gpio_lock);
-+
- return 0;
- }
-
-@@ -485,10 +526,10 @@
- struct gpio_private *p;
- struct gpio_private *todel;
-
-- spin_lock(&gpio_lock);
-+ spin_lock_irq(&gpio_lock);
-
-- p = alarmlist;
-- todel = (struct gpio_private *)filp->private_data;
-+ p = alarmlist;
-+ todel = (struct gpio_private *)filp->private_data;
-
- /* unlink from alarmlist and free the private structure */
-
-@@ -506,12 +547,13 @@
- while (p) {
- if (p->highalarm | p->lowalarm) {
- gpio_some_alarms = 1;
-+ spin_unlock_irq(&gpio_lock);
- return 0;
- }
- p = p->next;
- }
- gpio_some_alarms = 0;
-- spin_unlock(&gpio_lock);
-+ spin_unlock_irq(&gpio_lock);
- return 0;
- }
-
-@@ -691,6 +733,8 @@
- /* Must update gpio_some_alarms */
- struct gpio_private *p = alarmlist;
- int some_alarms;
-+ spin_lock_irq(&gpio_lock);
-+ p = alarmlist;
- some_alarms = 0;
- while (p) {
- if (p->highalarm | p->lowalarm) {
-@@ -700,6 +744,7 @@
- p = p->next;
- }
- gpio_some_alarms = some_alarms;
-+ spin_unlock_irq(&gpio_lock);
- }
- break;
- case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
-@@ -937,11 +982,11 @@
- * in some tests.
- */
- if (request_irq(TIMER0_IRQ_NBR, gpio_poll_timer_interrupt,
-- IRQF_SHARED | IRQF_DISABLED,"gpio poll", NULL)) {
-+ IRQF_SHARED | IRQF_DISABLED,"gpio poll", gpio_name)) {
- printk(KERN_CRIT "err: timer0 irq for gpio\n");
- }
- if (request_irq(PA_IRQ_NBR, gpio_pa_interrupt,
-- IRQF_SHARED | IRQF_DISABLED,"gpio PA", NULL)) {
-+ IRQF_SHARED | IRQF_DISABLED,"gpio PA", gpio_name)) {
- printk(KERN_CRIT "err: PA irq for gpio\n");
- }
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/i2c.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/i2c.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/i2c.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/i2c.c 2006-10-13 14:43:10.000000000 +0200
-@@ -11,7 +11,25 @@
- *! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff -
- *! don't use PB_I2C if DS1302 uses same bits,
- *! use PB.
-+*! June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now
-+*! generates nack on last received byte,
-+*! instead of ack.
-+*! i2c_getack changed data level while clock
-+*! was high, causing DS75 to see a stop condition
-+*!
- *! $Log: i2c.c,v $
-+*! Revision 1.17 2006/10/13 12:43:10 starvik
-+*! Merge of 2.6.18
-+*!
-+*! Revision 1.16 2005/09/29 13:33:35 bjarne
-+*! If "first" should have any purpos it should probably change value....
-+*!
-+*! Revision 1.15 2005/08/29 07:32:16 starvik
-+*! Merge of 2.6.13
-+*!
-+*! Revision 1.14 2005/06/30 18:07:31 starvik
-+*! Added the sendnack patch from 2.4.
-+*!
- *! Revision 1.13 2005/03/07 13:13:07 starvik
- *! Added spinlocks to protect states etc
- *!
-@@ -84,7 +102,7 @@
- *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
- *!
- *!***************************************************************************/
--/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */
-+/* $Id: i2c.c,v 1.17 2006/10/13 12:43:10 starvik Exp $ */
-
- /****************** INCLUDE FILES SECTION ***********************************/
-
-@@ -480,7 +498,7 @@
- i2c_delay(CLOCK_HIGH_TIME);
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME);
--
-+
- i2c_dir_in();
- }
-
-@@ -622,7 +640,7 @@
- * last received byte needs to be nacked
- * instead of acked
- */
-- i2c_sendack();
-+ i2c_sendnack();
- /*
- * end sequence
- */
-@@ -708,6 +726,7 @@
- if (!first) {
- return res;
- }
-+ first = 0;
-
- /* Setup and enable the Port B I2C interface */
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/pcf8563.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/pcf8563.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/pcf8563.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/pcf8563.c 2006-10-27 17:22:12.000000000 +0200
-@@ -8,14 +8,13 @@
- * low detector are also provided. All address and data are transferred
- * serially via two-line bidirectional I2C-bus. Maximum bus speed is
- * 400 kbits/s. The built-in word address register is incremented
-- * automatically after each written or read bute.
-+ * automatically after each written or read byte.
- *
-- * Copyright (c) 2002, Axis Communications AB
-+ * Copyright (c) 2002-2006, Axis Communications AB
- * All rights reserved.
- *
- * Author: Tobias Anderberg <tobiasa@axis.com>.
- *
-- * $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $
- */
-
- #include <linux/module.h>
-@@ -27,93 +26,105 @@
- #include <linux/ioctl.h>
- #include <linux/delay.h>
- #include <linux/bcd.h>
--#include <linux/capability.h>
-
- #include <asm/uaccess.h>
- #include <asm/system.h>
- #include <asm/io.h>
--#include <asm/arch/svinto.h>
- #include <asm/rtc.h>
-+
- #include "i2c.h"
-
--#define PCF8563_MAJOR 121 /* Local major number. */
--#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
--#define PCF8563_NAME "PCF8563"
--#define DRIVER_VERSION "$Revision: 1.11 $"
--
--/* I2C bus slave registers. */
--#define RTC_I2C_READ 0xa3
--#define RTC_I2C_WRITE 0xa2
-+#define PCF8563_MAJOR 121 /* Local major number. */
-+#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
-+#define PCF8563_NAME "PCF8563"
-+#define DRIVER_VERSION "$Revision: 1.18 $"
-
- /* Two simple wrapper macros, saves a few keystrokes. */
- #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
- #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
-
- static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
--
-+
- static const unsigned char days_in_month[] =
- { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
- int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
-
-+/* Cache VL bit value read at driver init since writing the RTC_SECOND
-+ * register clears the VL status.
-+ */
-+static int voltage_low = 0;
-+
- static struct file_operations pcf8563_fops = {
-- .owner = THIS_MODULE,
-- .ioctl = pcf8563_ioctl,
-+ owner: THIS_MODULE,
-+ ioctl: pcf8563_ioctl,
- };
-
- unsigned char
--pcf8563_readreg(int reg)
-+pcf8563_readreg(int reg)
- {
-- unsigned char res = i2c_readreg(RTC_I2C_READ, reg);
-+ unsigned char res = rtc_read(reg);
-
-- /* The PCF8563 does not return 0 for unimplemented bits */
-- switch(reg)
-- {
-+ /* The PCF8563 does not return 0 for unimplemented bits. */
-+ switch (reg) {
- case RTC_SECONDS:
- case RTC_MINUTES:
-- res &= 0x7f;
-- break;
-+ res &= 0x7F;
-+ break;
- case RTC_HOURS:
- case RTC_DAY_OF_MONTH:
-- res &= 0x3f;
-- break;
-+ res &= 0x3F;
-+ break;
-+ case RTC_WEEKDAY:
-+ res &= 0x07;
-+ break;
- case RTC_MONTH:
-- res = (res & 0x1f) - 1; /* PCF8563 returns month in range 1-12 */
-- break;
-+ res &= 0x1F;
-+ break;
-+ case RTC_CONTROL1:
-+ res &= 0xA8;
-+ break;
-+ case RTC_CONTROL2:
-+ res &= 0x1F;
-+ break;
-+ case RTC_CLOCKOUT_FREQ:
-+ case RTC_TIMER_CONTROL:
-+ res &= 0x83;
-+ break;
- }
- return res;
- }
-
- void
--pcf8563_writereg(int reg, unsigned char val)
-+pcf8563_writereg(int reg, unsigned char val)
- {
--#ifdef CONFIG_ETRAX_RTC_READONLY
-- if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
-- return;
--#endif
--
- rtc_write(reg, val);
- }
-
- void
- get_rtc_time(struct rtc_time *tm)
- {
-- tm->tm_sec = rtc_read(RTC_SECONDS);
-- tm->tm_min = rtc_read(RTC_MINUTES);
-+ tm->tm_sec = rtc_read(RTC_SECONDS);
-+ tm->tm_min = rtc_read(RTC_MINUTES);
- tm->tm_hour = rtc_read(RTC_HOURS);
- tm->tm_mday = rtc_read(RTC_DAY_OF_MONTH);
-- tm->tm_mon = rtc_read(RTC_MONTH);
-+ tm->tm_wday = rtc_read(RTC_WEEKDAY);
-+ tm->tm_mon = rtc_read(RTC_MONTH);
- tm->tm_year = rtc_read(RTC_YEAR);
-
-- if (tm->tm_sec & 0x80)
-- printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
-+ if (tm->tm_sec & 0x80) {
-+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-+ "information is no longer guaranteed!\n", PCF8563_NAME);
-+ }
-
-- tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
-- tm->tm_sec &= 0x7f;
-- tm->tm_min &= 0x7f;
-- tm->tm_hour &= 0x3f;
-- tm->tm_mday &= 0x3f;
-- tm->tm_mon &= 0x1f;
-+ tm->tm_year = BCD_TO_BIN(tm->tm_year) +
-+ ((tm->tm_mon & 0x80) ? 100 : 0);
-+ tm->tm_sec &= 0x7F;
-+ tm->tm_min &= 0x7F;
-+ tm->tm_hour &= 0x3F;
-+ tm->tm_mday &= 0x3F;
-+ tm->tm_wday &= 0x07; /* Not coded in BCD. */
-+ tm->tm_mon &= 0x1F;
-
- BCD_TO_BIN(tm->tm_sec);
- BCD_TO_BIN(tm->tm_min);
-@@ -126,17 +137,25 @@
- int __init
- pcf8563_init(void)
- {
-- int ret;
-+ static int res = 0;
-+ static int first = 1;
-+
-+ if (!first) {
-+ return res;
-+ }
-+ first = 0;
-
-- if ((ret = i2c_init())) {
-- printk(KERN_CRIT "pcf8563_init: failed to init i2c\n");
-- return ret;
-+ /* Initiate the i2c protocol. */
-+ res = i2c_init();
-+ if (res < 0) {
-+ printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
-+ return res;
- }
-
- /*
- * First of all we need to reset the chip. This is done by
-- * clearing control1, control2 and clk freq, clear the
-- * Voltage Low bit, and resetting all alarms.
-+ * clearing control1, control2 and clk freq and resetting
-+ * all alarms.
- */
- if (rtc_write(RTC_CONTROL1, 0x00) < 0)
- goto err;
-@@ -147,41 +166,44 @@
- if (rtc_write(RTC_CLOCKOUT_FREQ, 0x00) < 0)
- goto err;
-
-- /* Clear the VL bit in the seconds register. */
-- ret = rtc_read(RTC_SECONDS);
--
-- if (rtc_write(RTC_SECONDS, (ret & 0x7f)) < 0)
-+ if (rtc_write(RTC_TIMER_CONTROL, 0x03) < 0)
- goto err;
--
-+
- /* Reset the alarms. */
-- if (rtc_write(RTC_MINUTE_ALARM, 0x00) < 0)
-+ if (rtc_write(RTC_MINUTE_ALARM, 0x80) < 0)
- goto err;
--
-- if (rtc_write(RTC_HOUR_ALARM, 0x00) < 0)
-+
-+ if (rtc_write(RTC_HOUR_ALARM, 0x80) < 0)
- goto err;
--
-- if (rtc_write(RTC_DAY_ALARM, 0x00) < 0)
-+
-+ if (rtc_write(RTC_DAY_ALARM, 0x80) < 0)
- goto err;
--
-- if (rtc_write(RTC_WEEKDAY_ALARM, 0x00) < 0)
-+
-+ if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
- goto err;
--
-- /* Check for low voltage, and warn about it.. */
-- if (rtc_read(RTC_SECONDS) & 0x80)
-- printk(KERN_WARNING "%s: RTC Low Voltage - date/time is not reliable!\n", PCF8563_NAME);
--
-- return 0;
-+
-+ /* Check for low voltage, and warn about it. */
-+ if (rtc_read(RTC_SECONDS) & 0x80) {
-+ voltage_low = 1;
-+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-+ "date/time information is no longer guaranteed!\n",
-+ PCF8563_NAME);
-+ }
-+
-+ return res;
-
- err:
- printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-- return -1;
-+ res = -1;
-+ return res;
- }
-
- void __exit
- pcf8563_exit(void)
- {
- if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
-- printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME);
-+ printk(KERN_INFO "%s: Unable to unregister device.\n",
-+ PCF8563_NAME);
- }
- }
-
-@@ -190,7 +212,8 @@
- * POSIX says so!
- */
- int
--pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
-+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-+ unsigned long arg)
- {
- /* Some sanity checks. */
- if (_IOC_TYPE(cmd) != RTC_MAGIC)
-@@ -201,123 +224,151 @@
-
- switch (cmd) {
- case RTC_RD_TIME:
-- {
-- struct rtc_time tm;
--
-- spin_lock(&rtc_lock);
-- get_rtc_time(&tm);
-+ {
-+ struct rtc_time tm;
-
-- if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
-- spin_unlock(&rtc_lock);
-- return -EFAULT;
-- }
-+ spin_lock(&rtc_lock);
-+ memset(&tm, 0, sizeof tm);
-+ get_rtc_time(&tm);
-
-+ if (copy_to_user((struct rtc_time *) arg, &tm,
-+ sizeof tm)) {
- spin_unlock(&rtc_lock);
-- return 0;
-+ return -EFAULT;
- }
-- break;
-+
-+ spin_unlock(&rtc_lock);
-+
-+ return 0;
-+ }
- case RTC_SET_TIME:
-- {
--#ifdef CONFIG_ETRAX_RTC_READONLY
-+ {
-+ int leap;
-+ int year;
-+ int century;
-+ struct rtc_time tm;
-+
-+ memset(&tm, 0, sizeof tm);
-+ if (!capable(CAP_SYS_TIME))
- return -EPERM;
--#else
-- int leap;
-- int century;
-- struct rtc_time tm;
--
-- memset(&tm, 0, sizeof (struct rtc_time));
-- if (!capable(CAP_SYS_TIME))
-- return -EPERM;
--
-- if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof(struct rtc_time)))
-- return -EFAULT;
--
-- /* Convert from struct tm to struct rtc_time. */
-- tm.tm_year += 1900;
-- tm.tm_mon += 1;
--
-- leap = ((tm.tm_mon == 2) && ((tm.tm_year % 4) == 0)) ? 1 : 0;
--
-- /* Perform some sanity checks. */
-- if ((tm.tm_year < 1970) ||
-- (tm.tm_mon > 12) ||
-- (tm.tm_mday == 0) ||
-- (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-- (tm.tm_hour >= 24) ||
-- (tm.tm_min >= 60) ||
-- (tm.tm_sec >= 60))
-- return -EINVAL;
--
-- century = (tm.tm_year >= 2000) ? 0x80 : 0;
-- tm.tm_year = tm.tm_year % 100;
--
-- BIN_TO_BCD(tm.tm_year);
-- BIN_TO_BCD(tm.tm_mday);
-- BIN_TO_BCD(tm.tm_hour);
-- BIN_TO_BCD(tm.tm_min);
-- BIN_TO_BCD(tm.tm_sec);
-- tm.tm_mon |= century;
--
-- spin_lock(&rtc_lock);
--
-- rtc_write(RTC_YEAR, tm.tm_year);
-- rtc_write(RTC_MONTH, tm.tm_mon);
-- rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-- rtc_write(RTC_HOURS, tm.tm_hour);
-- rtc_write(RTC_MINUTES, tm.tm_min);
-- rtc_write(RTC_SECONDS, tm.tm_sec);
-
-- spin_unlock(&rtc_lock);
-+ if (copy_from_user(&tm, (struct rtc_time *) arg,
-+ sizeof tm)) {
-+ return -EFAULT;
-+ }
-
-- return 0;
--#endif /* !CONFIG_ETRAX_RTC_READONLY */
-+ /* Convert from struct tm to struct rtc_time. */
-+ tm.tm_year += 1900;
-+ tm.tm_mon += 1;
-+
-+ /*
-+ * Check if tm.tm_year is a leap year. A year is a leap
-+ * year if it is divisible by 4 but not 100, except
-+ * that years divisible by 400 _are_ leap years.
-+ */
-+ year = tm.tm_year;
-+ leap = (tm.tm_mon == 2) &&
-+ ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-+
-+ /* Perform some sanity checks. */
-+ if ((tm.tm_year < 1970) ||
-+ (tm.tm_mon > 12) ||
-+ (tm.tm_mday == 0) ||
-+ (tm.tm_mday > days_in_month[tm.tm_mon] + leap) ||
-+ (tm.tm_wday >= 7) ||
-+ (tm.tm_hour >= 24) ||
-+ (tm.tm_min >= 60) ||
-+ (tm.tm_sec >= 60)) {
-+ return -EINVAL;
- }
-
-- case RTC_VLOW_RD:
-- {
-- int vl_bit = 0;
-+ century = (tm.tm_year >= 2000) ? 0x80 : 0;
-+ tm.tm_year = tm.tm_year % 100;
-
-- if (rtc_read(RTC_SECONDS) & 0x80) {
-- vl_bit = 1;
-- printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-- "date/time information is no longer guaranteed!\n",
-- PCF8563_NAME);
-- }
-- if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
-- return -EFAULT;
-+ BIN_TO_BCD(tm.tm_year);
-+ BIN_TO_BCD(tm.tm_mon);
-+ BIN_TO_BCD(tm.tm_mday);
-+ BIN_TO_BCD(tm.tm_hour);
-+ BIN_TO_BCD(tm.tm_min);
-+ BIN_TO_BCD(tm.tm_sec);
-+ tm.tm_mon |= century;
-+
-+ spin_lock(&rtc_lock);
-+
-+ rtc_write(RTC_YEAR, tm.tm_year);
-+ rtc_write(RTC_MONTH, tm.tm_mon);
-+ rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
-+ rtc_write(RTC_DAY_OF_MONTH, tm.tm_mday);
-+ rtc_write(RTC_HOURS, tm.tm_hour);
-+ rtc_write(RTC_MINUTES, tm.tm_min);
-+ rtc_write(RTC_SECONDS, tm.tm_sec);
-+
-+ spin_unlock(&rtc_lock);
-
- return 0;
- }
-+ case RTC_VLOW_RD:
-+ if (voltage_low) {
-+ printk(KERN_WARNING "%s: RTC Voltage Low - "
-+ "reliable date/time information is no "
-+ "longer guaranteed!\n", PCF8563_NAME);
-+ }
-+
-+ if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) {
-+ return -EFAULT;
-+ }
-+
-+ return 0;
-
- case RTC_VLOW_SET:
- {
-- /* Clear the VL bit in the seconds register */
-+ /* Clear the VL bit in the seconds register in case
-+ * the time has not been set already (which would
-+ * have cleared it). This does not really matter
-+ * because of the cached voltage_low value but do it
-+ * anyway for consistency. */
-+
- int ret = rtc_read(RTC_SECONDS);
-
- rtc_write(RTC_SECONDS, (ret & 0x7F));
-
-+ /* Clear the cached value. */
-+ voltage_low = 0;
-+
- return 0;
- }
--
- default:
-- return -ENOTTY;
-+ return -ENOTTY;
- }
-
- return 0;
- }
-
--static int __init
-+static int __init
- pcf8563_register(void)
- {
-- pcf8563_init();
-+ if (pcf8563_init() < 0) {
-+ printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
-+ "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-+ return -1;
-+ }
-+
- if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-- printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
-- PCF8563_NAME, PCF8563_MAJOR);
-+ printk(KERN_INFO "%s: Unable to get major numer %d for RTC "
-+ "device.\n", PCF8563_NAME, PCF8563_MAJOR);
- return -1;
- }
-
-- printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-- return 0;
-+ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
-+ DRIVER_VERSION);
-+
-+ /* Check for low voltage, and warn about it. */
-+ if (voltage_low) {
-+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-+ "information is no longer guaranteed!\n", PCF8563_NAME);
-+ }
-+
-+ return 0;
- }
-
- module_init(pcf8563_register);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/drivers/sync_serial.c linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/sync_serial.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/drivers/sync_serial.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/drivers/sync_serial.c 2007-02-05 12:56:34.000000000 +0100
-@@ -0,0 +1,1329 @@
-+/*
-+ * Simple synchronous serial port driver for ETRAX 100LX.
-+ *
-+ * Synchronous serial ports are used for continuous streamed data like audio.
-+ * The default setting for this driver is compatible with the STA 013 MP3
-+ * decoder. The driver can easily be tuned to fit other audio encoder/decoders
-+ * and SPI
-+ *
-+ * Copyright (c) 2001-2006 Axis Communications AB
-+ *
-+ * Author: Mikael Starvik, Johan Adolfsson
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/major.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/interrupt.h>
-+#include <linux/poll.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <asm/irq.h>
-+#include <asm/dma.h>
-+#include <asm/io.h>
-+#include <asm/arch/svinto.h>
-+#include <asm/uaccess.h>
-+#include <asm/system.h>
-+#include <asm/sync_serial.h>
-+#include <asm/arch/io_interface_mux.h>
-+
-+/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
-+/* */
-+/* Three DMA descriptors are linked together. Each DMA descriptor is */
-+/* responsible for port->bufchunk of a common buffer. */
-+/* */
-+/* +---------------------------------------------+ */
-+/* | +----------+ +----------+ +----------+ | */
-+/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */
-+/* +----------+ +----------+ +----------+ */
-+/* | | | */
-+/* v v v */
-+/* +-------------------------------------+ */
-+/* | BUFFER | */
-+/* +-------------------------------------+ */
-+/* |<- data_avail ->| */
-+/* readp writep */
-+/* */
-+/* If the application keeps up the pace readp will be right after writep.*/
-+/* If the application can't keep the pace we have to throw away data. */
-+/* The idea is that readp should be ready with the data pointed out by */
-+/* Descr[i] when the DMA has filled in Descr[i+1]. */
-+/* Otherwise we will discard */
-+/* the rest of the data pointed out by Descr1 and set readp to the start */
-+/* of Descr2 */
-+
-+#define SYNC_SERIAL_MAJOR 125
-+
-+/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */
-+/* words can be handled */
-+#define IN_BUFFER_SIZE 12288
-+#define IN_DESCR_SIZE 256
-+#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
-+#define OUT_BUFFER_SIZE 4096
-+
-+#define DEFAULT_FRAME_RATE 0
-+#define DEFAULT_WORD_RATE 7
-+
-+/* NOTE: Enabling some debug will likely cause overrun or underrun,
-+ * especially if manual mode is use.
-+ */
-+#define DEBUG(x)
-+#define DEBUGREAD(x)
-+#define DEBUGWRITE(x)
-+#define DEBUGPOLL(x)
-+#define DEBUGRXINT(x)
-+#define DEBUGTXINT(x)
-+
-+/* Define some macros to access ETRAX 100 registers */
-+#define SETF(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
-+ IO_FIELD_(reg##_, field##_, val)
-+#define SETS(var, reg, field, val) var = (var & ~IO_MASK_(reg##_, field##_)) | \
-+ IO_STATE_(reg##_, field##_, _##val)
-+
-+typedef struct sync_port
-+{
-+ /* Etrax registers and bits*/
-+ const volatile unsigned * const status;
-+ volatile unsigned * const ctrl_data;
-+ volatile unsigned * const output_dma_first;
-+ volatile unsigned char * const output_dma_cmd;
-+ volatile unsigned char * const output_dma_clr_irq;
-+ volatile unsigned * const input_dma_first;
-+ volatile unsigned char * const input_dma_cmd;
-+ volatile unsigned * const input_dma_descr;
-+ /* 8*4 */
-+ volatile unsigned char * const input_dma_clr_irq;
-+ volatile unsigned * const data_out;
-+ const volatile unsigned * const data_in;
-+ char data_avail_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
-+ char transmitter_ready_bit; /* In R_IRQ_MASK1_RD/SET/CLR */
-+ char input_dma_descr_bit; /* In R_IRQ_MASK2_RD */
-+
-+ char output_dma_bit; /* In R_IRQ_MASK2_RD */
-+ /* End of fields initialised in array */
-+ char started; /* 1 if port has been started */
-+ char port_nbr; /* Port 0 or 1 */
-+ char busy; /* 1 if port is busy */
-+
-+ char enabled; /* 1 if port is enabled */
-+ char use_dma; /* 1 if port uses dma */
-+ char tr_running;
-+
-+ char init_irqs;
-+
-+ unsigned int ctrl_data_shadow; /* Register shadow */
-+ volatile unsigned int out_count; /* Remaining bytes for current transfer */
-+ unsigned char* outp; /* Current position in out_buffer */
-+ /* 16*4 */
-+ volatile unsigned char* volatile readp; /* Next byte to be read by application */
-+ volatile unsigned char* volatile writep; /* Next byte to be written by etrax */
-+ unsigned int in_buffer_size;
-+ unsigned int inbufchunk;
-+ struct etrax_dma_descr out_descr __attribute__ ((aligned(32)));
-+ struct etrax_dma_descr in_descr[NUM_IN_DESCR] __attribute__ ((aligned(32)));
-+ unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32)));
-+ unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32)));
-+ unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32)));
-+ struct etrax_dma_descr* next_rx_desc;
-+ struct etrax_dma_descr* prev_rx_desc;
-+ int full;
-+
-+ wait_queue_head_t out_wait_q;
-+ wait_queue_head_t in_wait_q;
-+} sync_port;
-+
-+
-+static int etrax_sync_serial_init(void);
-+static void initialize_port(int portnbr);
-+static inline int sync_data_avail(struct sync_port *port);
-+
-+static int sync_serial_open(struct inode *, struct file*);
-+static int sync_serial_release(struct inode*, struct file*);
-+static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
-+
-+static int sync_serial_ioctl(struct inode*, struct file*,
-+ unsigned int cmd, unsigned long arg);
-+static ssize_t sync_serial_write(struct file * file, const char * buf,
-+ size_t count, loff_t *ppos);
-+static ssize_t sync_serial_read(struct file *file, char *buf,
-+ size_t count, loff_t *ppos);
-+
-+#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
-+ defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
-+ (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
-+ defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))
-+#define SYNC_SER_DMA
-+#endif
-+
-+static void send_word(sync_port* port);
-+static void start_dma(struct sync_port *port, const char* data, int count);
-+static void start_dma_in(sync_port* port);
-+#ifdef SYNC_SER_DMA
-+static irqreturn_t tr_interrupt(int irq, void *dev_id);
-+static irqreturn_t rx_interrupt(int irq, void *dev_id);
-+#endif
-+#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
-+ !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
-+ (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
-+ !defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))
-+#define SYNC_SER_MANUAL
-+#endif
-+#ifdef SYNC_SER_MANUAL
-+static irqreturn_t manual_interrupt(int irq, void *dev_id);
-+#endif
-+
-+/* The ports */
-+static struct sync_port ports[]=
-+{
-+ {
-+ .status = R_SYNC_SERIAL1_STATUS,
-+ .ctrl_data = R_SYNC_SERIAL1_CTRL,
-+ .output_dma_first = R_DMA_CH8_FIRST,
-+ .output_dma_cmd = R_DMA_CH8_CMD,
-+ .output_dma_clr_irq = R_DMA_CH8_CLR_INTR,
-+ .input_dma_first = R_DMA_CH9_FIRST,
-+ .input_dma_cmd = R_DMA_CH9_CMD,
-+ .input_dma_descr = R_DMA_CH9_DESCR,
-+ .input_dma_clr_irq = R_DMA_CH9_CLR_INTR,
-+ .data_out = R_SYNC_SERIAL1_TR_DATA,
-+ .data_in = R_SYNC_SERIAL1_REC_DATA,
-+ .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_data),
-+ .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser1_ready),
-+ .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma9_descr),
-+ .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma8_eop),
-+ .init_irqs = 1,
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
-+ .use_dma = 1,
-+#else
-+ .use_dma = 0,
-+#endif
-+ },
-+ {
-+ .status = R_SYNC_SERIAL3_STATUS,
-+ .ctrl_data = R_SYNC_SERIAL3_CTRL,
-+ .output_dma_first = R_DMA_CH4_FIRST,
-+ .output_dma_cmd = R_DMA_CH4_CMD,
-+ .output_dma_clr_irq = R_DMA_CH4_CLR_INTR,
-+ .input_dma_first = R_DMA_CH5_FIRST,
-+ .input_dma_cmd = R_DMA_CH5_CMD,
-+ .input_dma_descr = R_DMA_CH5_DESCR,
-+ .input_dma_clr_irq = R_DMA_CH5_CLR_INTR,
-+ .data_out = R_SYNC_SERIAL3_TR_DATA,
-+ .data_in = R_SYNC_SERIAL3_REC_DATA,
-+ .data_avail_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_data),
-+ .transmitter_ready_bit = IO_BITNR(R_IRQ_MASK1_RD, ser3_ready),
-+ .input_dma_descr_bit = IO_BITNR(R_IRQ_MASK2_RD, dma5_descr),
-+ .output_dma_bit = IO_BITNR(R_IRQ_MASK2_RD, dma4_eop),
-+ .init_irqs = 1,
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
-+ .use_dma = 1,
-+#else
-+ .use_dma = 0,
-+#endif
-+ }
-+};
-+
-+/* Register shadows */
-+static unsigned sync_serial_prescale_shadow = 0;
-+
-+#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port))
-+
-+static struct file_operations sync_serial_fops = {
-+ .owner = THIS_MODULE,
-+ .write = sync_serial_write,
-+ .read = sync_serial_read,
-+ .poll = sync_serial_poll,
-+ .ioctl = sync_serial_ioctl,
-+ .open = sync_serial_open,
-+ .release = sync_serial_release
-+};
-+
-+static int __init etrax_sync_serial_init(void)
-+{
-+ ports[0].enabled = 0;
-+ ports[1].enabled = 0;
-+
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
-+ if (cris_request_io_interface(if_sync_serial_1, "sync_ser1")) {
-+ printk(KERN_CRIT "ETRAX100LX sync_serial: Could not allocate IO group for port %d\n", 0);
-+ return -EBUSY;
-+ }
-+#endif
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
-+ if (cris_request_io_interface(if_sync_serial_3, "sync_ser3")) {
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
-+ cris_free_io_interface(if_sync_serial_1);
-+#endif
-+ printk(KERN_CRIT "ETRAX100LX sync_serial: Could not allocate IO group for port %d\n", 1);
-+ return -EBUSY;
-+ }
-+#endif
-+
-+ if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 )
-+ {
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
-+ cris_free_io_interface(if_sync_serial_3);
-+#endif
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
-+ cris_free_io_interface(if_sync_serial_1);
-+#endif
-+ printk("unable to get major for synchronous serial port\n");
-+ return -EBUSY;
-+ }
-+
-+ /* Deselect synchronous serial ports while configuring. */
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
-+ *R_GEN_CONFIG_II = gen_config_ii_shadow;
-+
-+ /* Initialize Ports */
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
-+ ports[0].enabled = 1;
-+ SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser1, ss1extra);
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
-+ ports[0].use_dma = 1;
-+#else
-+ ports[0].use_dma = 0;
-+#endif
-+ initialize_port(0);
-+#endif
-+
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
-+ ports[1].enabled = 1;
-+ SETS(port_pb_i2c_shadow, R_PORT_PB_I2C, syncser3, ss3extra);
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
-+#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
-+ ports[1].use_dma = 1;
-+#else
-+ ports[1].use_dma = 0;
-+#endif
-+ initialize_port(1);
-+#endif
-+
-+ *R_PORT_PB_I2C = port_pb_i2c_shadow; /* Use PB4/PB7 */
-+
-+ /* Set up timing */
-+ *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow = (
-+ IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec) |
-+ IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u1, external) |
-+ IO_STATE(R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec) |
-+ IO_STATE(R_SYNC_SERIAL_PRESCALE, word_stb_sel_u3, external) |
-+ IO_STATE(R_SYNC_SERIAL_PRESCALE, prescaler, div4) |
-+ IO_FIELD(R_SYNC_SERIAL_PRESCALE, frame_rate, DEFAULT_FRAME_RATE) |
-+ IO_FIELD(R_SYNC_SERIAL_PRESCALE, word_rate, DEFAULT_WORD_RATE) |
-+ IO_STATE(R_SYNC_SERIAL_PRESCALE, warp_mode, normal));
-+
-+ /* Select synchronous ports */
-+ *R_GEN_CONFIG_II = gen_config_ii_shadow;
-+
-+ printk("ETRAX 100LX synchronous serial port driver\n");
-+ return 0;
-+}
-+
-+static void __init initialize_port(int portnbr)
-+{
-+ struct sync_port* port = &ports[portnbr];
-+
-+ DEBUG(printk("Init sync serial port %d\n", portnbr));
-+
-+ port->started = 0;
-+ port->port_nbr = portnbr;
-+ port->busy = 0;
-+ port->tr_running = 0;
-+
-+ port->out_count = 0;
-+ port->outp = port->out_buffer;
-+
-+ port->readp = port->flip;
-+ port->writep = port->flip;
-+ port->in_buffer_size = IN_BUFFER_SIZE;
-+ port->inbufchunk = IN_DESCR_SIZE;
-+ port->next_rx_desc = &port->in_descr[0];
-+ port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1];
-+ port->prev_rx_desc->ctrl = d_eol;
-+
-+ init_waitqueue_head(&port->out_wait_q);
-+ init_waitqueue_head(&port->in_wait_q);
-+
-+ port->ctrl_data_shadow =
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, tr_baud, c115k2Hz) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, mode, master_output) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, error, ignore) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, rec_enable, disable) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, f_synctype, normal) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, f_syncsize, word) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, f_sync, on) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_mode, normal) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_halt, stopped) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, bitorder, msb) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, tr_enable, disable) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, buf_empty, lmt_8) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, buf_full, lmt_8) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_polarity, neg) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, frame_polarity, normal)|
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, status_polarity, inverted)|
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, clk_driver, normal) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, frame_driver, normal) |
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, status_driver, normal)|
-+ IO_STATE(R_SYNC_SERIAL1_CTRL, def_out0, high);
-+
-+ if (port->use_dma)
-+ port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, dma_enable, on);
-+ else
-+ port->ctrl_data_shadow |= IO_STATE(R_SYNC_SERIAL1_CTRL, dma_enable, off);
-+
-+ *port->ctrl_data = port->ctrl_data_shadow;
-+}
-+
-+static inline int sync_data_avail(struct sync_port *port)
-+{
-+ int avail;
-+ unsigned char *start;
-+ unsigned char *end;
-+
-+ start = (unsigned char*)port->readp; /* cast away volatile */
-+ end = (unsigned char*)port->writep; /* cast away volatile */
-+ /* 0123456789 0123456789
-+ * ----- - -----
-+ * ^rp ^wp ^wp ^rp
-+ */
-+
-+ if (end >= start)
-+ avail = end - start;
-+ else
-+ avail = port->in_buffer_size - (start - end);
-+ return avail;
-+}
-+
-+static inline int sync_data_avail_to_end(struct sync_port *port)
-+{
-+ int avail;
-+ unsigned char *start;
-+ unsigned char *end;
-+
-+ start = (unsigned char*)port->readp; /* cast away volatile */
-+ end = (unsigned char*)port->writep; /* cast away volatile */
-+ /* 0123456789 0123456789
-+ * ----- -----
-+ * ^rp ^wp ^wp ^rp
-+ */
-+
-+ if (end >= start)
-+ avail = end - start;
-+ else
-+ avail = port->flip + port->in_buffer_size - start;
-+ return avail;
-+}
-+
-+
-+static int sync_serial_open(struct inode *inode, struct file *file)
-+{
-+ int dev = MINOR(inode->i_rdev);
-+ sync_port* port;
-+ int mode;
-+
-+ DEBUG(printk("Open sync serial port %d\n", dev));
-+
-+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
-+ {
-+ DEBUG(printk("Invalid minor %d\n", dev));
-+ return -ENODEV;
-+ }
-+ port = &ports[dev];
-+ /* Allow open this device twice (assuming one reader and one writer) */
-+ if (port->busy == 2)
-+ {
-+ DEBUG(printk("Device is busy.. \n"));
-+ return -EBUSY;
-+ }
-+ if (port->init_irqs) {
-+ if (port->use_dma) {
-+ if (port == &ports[0]){
-+#ifdef SYNC_SER_DMA
-+ if(request_irq(24,
-+ tr_interrupt,
-+ 0,
-+ "synchronous serial 1 dma tr",
-+ &ports[0])) {
-+ printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ");
-+ return -EBUSY;
-+ } else if(request_irq(25,
-+ rx_interrupt,
-+ 0,
-+ "synchronous serial 1 dma rx",
-+ &ports[0])) {
-+ free_irq(24, &port[0]);
-+ printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ");
-+ return -EBUSY;
-+ } else if (cris_request_dma(8,
-+ "synchronous serial 1 dma tr",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_ser1)) {
-+ free_irq(24, &port[0]);
-+ free_irq(25, &port[0]);
-+ printk(KERN_CRIT "Can't allocate sync serial port 1 TX DMA channel");
-+ return -EBUSY;
-+ } else if (cris_request_dma(9,
-+ "synchronous serial 1 dma rec",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_ser1)) {
-+ cris_free_dma(8, NULL);
-+ free_irq(24, &port[0]);
-+ free_irq(25, &port[0]);
-+ printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel");
-+ return -EBUSY;
-+ }
-+#endif
-+ RESET_DMA(8); WAIT_DMA(8);
-+ RESET_DMA(9); WAIT_DMA(9);
-+ *R_DMA_CH8_CLR_INTR = IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do);
-+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH9_CLR_INTR, clr_descr, do);
-+ *R_IRQ_MASK2_SET =
-+ IO_STATE(R_IRQ_MASK2_SET, dma8_eop, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set);
-+ }
-+ else if (port == &ports[1]){
-+#ifdef SYNC_SER_DMA
-+ if (request_irq(20,
-+ tr_interrupt,
-+ 0,
-+ "synchronous serial 3 dma tr",
-+ &ports[1])) {
-+ printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ");
-+ return -EBUSY;
-+ } else if (request_irq(21,
-+ rx_interrupt,
-+ 0,
-+ "synchronous serial 3 dma rx",
-+ &ports[1])) {
-+ free_irq(20, &ports[1]);
-+ printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ");
-+ return -EBUSY;
-+ } else if (cris_request_dma(4,
-+ "synchronous serial 3 dma tr",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_ser3)) {
-+ free_irq(21, &ports[1]);
-+ free_irq(20, &ports[1]);
-+ printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel");
-+ return -EBUSY;
-+ } else if (cris_request_dma(5,
-+ "synchronous serial 3 dma rec",
-+ DMA_VERBOSE_ON_ERROR,
-+ dma_ser3)) {
-+ cris_free_dma(4, NULL);
-+ free_irq(21, &ports[1]);
-+ free_irq(20, &ports[1]);
-+ printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel");
-+ return -EBUSY;
-+ }
-+#endif
-+ RESET_DMA(4); WAIT_DMA(4);
-+ RESET_DMA(5); WAIT_DMA(5);
-+ *R_DMA_CH4_CLR_INTR = IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do);
-+ *R_DMA_CH5_CLR_INTR = IO_STATE(R_DMA_CH5_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH5_CLR_INTR, clr_descr, do);
-+ *R_IRQ_MASK2_SET =
-+ IO_STATE(R_IRQ_MASK2_SET, dma4_eop, set) |
-+ IO_STATE(R_IRQ_MASK2_SET, dma5_descr, set);
-+ }
-+ start_dma_in(port);
-+ port->init_irqs = 0;
-+ } else { /* !port->use_dma */
-+#ifdef SYNC_SER_MANUAL
-+ if (port == &ports[0]) {
-+ if (request_irq(8,
-+ manual_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED,
-+ "synchronous serial manual irq",
-+ &ports[0])) {
-+ printk("Can't allocate sync serial manual irq");
-+ return -EBUSY;
-+ }
-+ } else if (port == &ports[1]) {
-+ if (request_irq(8,
-+ manual_interrupt,
-+ IRQF_SHARED | IRQF_DISABLED,
-+ "synchronous serial manual irq",
-+ &ports[1])) {
-+ printk(KERN_CRIT "Can't allocate sync serial manual irq");
-+ return -EBUSY;
-+ }
-+ }
-+ port->init_irqs = 0;
-+#else
-+ panic("sync_serial: Manual mode not supported.\n");
-+#endif /* SYNC_SER_MANUAL */
-+ }
-+ } /* port->init_irqs */
-+
-+ port->busy++;
-+ /* Start port if we use it as input */
-+ mode = IO_EXTRACT(R_SYNC_SERIAL1_CTRL, mode, port->ctrl_data_shadow);
-+ if (mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_input) ||
-+ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_input) ||
-+ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, master_bidir) ||
-+ mode == IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, mode, slave_bidir)) {
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable);
-+ port->started = 1;
-+ *port->ctrl_data = port->ctrl_data_shadow;
-+ if (!port->use_dma)
-+ *R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
-+ DEBUG(printk("sser%d rec started\n", dev));
-+ }
-+ return 0;
-+}
-+
-+static int sync_serial_release(struct inode *inode, struct file *file)
-+{
-+ int dev = MINOR(inode->i_rdev);
-+ sync_port* port;
-+
-+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
-+ {
-+ DEBUG(printk("Invalid minor %d\n", dev));
-+ return -ENODEV;
-+ }
-+ port = &ports[dev];
-+ if (port->busy)
-+ port->busy--;
-+ if (!port->busy)
-+ *R_IRQ_MASK1_CLR = ((1 << port->data_avail_bit) |
-+ (1 << port->transmitter_ready_bit));
-+
-+ return 0;
-+}
-+
-+
-+
-+static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
-+{
-+ int dev = MINOR(file->f_dentry->d_inode->i_rdev);
-+ unsigned int mask = 0;
-+ sync_port* port;
-+ DEBUGPOLL( static unsigned int prev_mask = 0; );
-+
-+ port = &ports[dev];
-+ poll_wait(file, &port->out_wait_q, wait);
-+ poll_wait(file, &port->in_wait_q, wait);
-+ /* Some room to write */
-+ if (port->out_count < OUT_BUFFER_SIZE)
-+ mask |= POLLOUT | POLLWRNORM;
-+ /* At least an inbufchunk of data */
-+ if (sync_data_avail(port) >= port->inbufchunk)
-+ mask |= POLLIN | POLLRDNORM;
-+
-+ DEBUGPOLL(if (mask != prev_mask)
-+ printk("sync_serial_poll: mask 0x%08X %s %s\n", mask,
-+ mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":"");
-+ prev_mask = mask;
-+ );
-+ return mask;
-+}
-+
-+static int sync_serial_ioctl(struct inode *inode, struct file *file,
-+ unsigned int cmd, unsigned long arg)
-+{
-+ int return_val = 0;
-+ unsigned long flags;
-+
-+ int dev = MINOR(file->f_dentry->d_inode->i_rdev);
-+ sync_port* port;
-+
-+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
-+ {
-+ DEBUG(printk("Invalid minor %d\n", dev));
-+ return -1;
-+ }
-+ port = &ports[dev];
-+
-+ local_irq_save(flags);
-+ /* Disable port while changing config */
-+ if (dev)
-+ {
-+ if (port->use_dma) {
-+ RESET_DMA(4); WAIT_DMA(4);
-+ port->tr_running = 0;
-+ port->out_count = 0;
-+ port->outp = port->out_buffer;
-+ *R_DMA_CH4_CLR_INTR = IO_STATE(R_DMA_CH4_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH4_CLR_INTR, clr_descr, do);
-+ }
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, async);
-+ }
-+ else
-+ {
-+ if (port->use_dma) {
-+ RESET_DMA(8); WAIT_DMA(8);
-+ port->tr_running = 0;
-+ port->out_count = 0;
-+ port->outp = port->out_buffer;
-+ *R_DMA_CH8_CLR_INTR = IO_STATE(R_DMA_CH8_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH8_CLR_INTR, clr_descr, do);
-+ }
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, async);
-+ }
-+ *R_GEN_CONFIG_II = gen_config_ii_shadow;
-+ local_irq_restore(flags);
-+
-+ switch(cmd)
-+ {
-+ case SSP_SPEED:
-+ if (GET_SPEED(arg) == CODEC)
-+ {
-+ if (dev)
-+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u3, codec);
-+ else
-+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u1, codec);
-+
-+ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, prescaler, GET_FREQ(arg));
-+ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, frame_rate, GET_FRAME_RATE(arg));
-+ SETF(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, word_rate, GET_WORD_RATE(arg));
-+ }
-+ else
-+ {
-+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_baud, GET_SPEED(arg));
-+ if (dev)
-+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u3, baudrate);
-+ else
-+ SETS(sync_serial_prescale_shadow, R_SYNC_SERIAL_PRESCALE, clk_sel_u1, baudrate);
-+ }
-+ break;
-+ case SSP_MODE:
-+ if (arg > 5)
-+ return -EINVAL;
-+ if (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT)
-+ *R_IRQ_MASK1_CLR = 1 << port->data_avail_bit;
-+ else if (!port->use_dma)
-+ *R_IRQ_MASK1_SET = 1 << port->data_avail_bit;
-+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, arg);
-+ break;
-+ case SSP_FRAME_SYNC:
-+ if (arg & NORMAL_SYNC)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, normal);
-+ else if (arg & EARLY_SYNC)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, early);
-+
-+ if (arg & BIT_SYNC)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, bit);
-+ else if (arg & WORD_SYNC)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, word);
-+ else if (arg & EXTENDED_SYNC)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, extended);
-+
-+ if (arg & SYNC_ON)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on);
-+ else if (arg & SYNC_OFF)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, off);
-+
-+ if (arg & WORD_SIZE_8)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size8bit);
-+ else if (arg & WORD_SIZE_12)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size12bit);
-+ else if (arg & WORD_SIZE_16)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size16bit);
-+ else if (arg & WORD_SIZE_24)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size24bit);
-+ else if (arg & WORD_SIZE_32)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size32bit);
-+
-+ if (arg & BIT_ORDER_MSB)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, msb);
-+ else if (arg & BIT_ORDER_LSB)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, lsb);
-+
-+ if (arg & FLOW_CONTROL_ENABLE)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, enabled);
-+ else if (arg & FLOW_CONTROL_DISABLE)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, disabled);
-+
-+ if (arg & CLOCK_NOT_GATED)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_mode, normal);
-+ else if (arg & CLOCK_GATED)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_mode, gated);
-+
-+ break;
-+ case SSP_IPOLARITY:
-+ /* NOTE!! negedge is considered NORMAL */
-+ if (arg & CLOCK_NORMAL)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, neg);
-+ else if (arg & CLOCK_INVERT)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, pos);
-+
-+ if (arg & FRAME_NORMAL)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, normal);
-+ else if (arg & FRAME_INVERT)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, inverted);
-+
-+ if (arg & STATUS_NORMAL)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_polarity, normal);
-+ else if (arg & STATUS_INVERT)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_polarity, inverted);
-+ break;
-+ case SSP_OPOLARITY:
-+ if (arg & CLOCK_NORMAL)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, normal);
-+ else if (arg & CLOCK_INVERT)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, inverted);
-+
-+ if (arg & FRAME_NORMAL)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, normal);
-+ else if (arg & FRAME_INVERT)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, inverted);
-+
-+ if (arg & STATUS_NORMAL)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_driver, normal);
-+ else if (arg & STATUS_INVERT)
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, status_driver, inverted);
-+ break;
-+ case SSP_SPI:
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, flow_ctrl, disabled);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, bitorder, msb);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, wordsize, size8bit);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_sync, on);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_syncsize, word);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, f_synctype, normal);
-+ if (arg & SPI_SLAVE)
-+ {
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_polarity, inverted);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_polarity, neg);
-+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, SLAVE_INPUT);
-+ }
-+ else
-+ {
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, frame_driver, inverted);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_driver, inverted);
-+ SETF(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, mode, MASTER_OUTPUT);
-+ }
-+ break;
-+ case SSP_INBUFCHUNK:
-+#if 0
-+ if (arg > port->in_buffer_size/NUM_IN_DESCR)
-+ return -EINVAL;
-+ port->inbufchunk = arg;
-+ /* Make sure in_buffer_size is a multiple of inbufchunk */
-+ port->in_buffer_size = (port->in_buffer_size/port->inbufchunk) * port->inbufchunk;
-+ DEBUG(printk("inbufchunk %i in_buffer_size: %i\n", port->inbufchunk, port->in_buffer_size));
-+ if (port->use_dma) {
-+ if (port->port_nbr == 0) {
-+ RESET_DMA(9);
-+ WAIT_DMA(9);
-+ } else {
-+ RESET_DMA(5);
-+ WAIT_DMA(5);
-+ }
-+ start_dma_in(port);
-+ }
-+#endif
-+ break;
-+ default:
-+ return_val = -1;
-+ }
-+ /* Make sure we write the config without interruption */
-+ local_irq_save(flags);
-+ /* Set config and enable port */
-+ *port->ctrl_data = port->ctrl_data_shadow;
-+ nop(); nop(); nop(); nop();
-+ *R_SYNC_SERIAL_PRESCALE = sync_serial_prescale_shadow;
-+ nop(); nop(); nop(); nop();
-+ if (dev)
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode3, sync);
-+ else
-+ SETS(gen_config_ii_shadow, R_GEN_CONFIG_II, sermode1, sync);
-+
-+ *R_GEN_CONFIG_II = gen_config_ii_shadow;
-+ /* Reset DMA. At readout from serial port the data could be shifted
-+ * one byte if not resetting DMA.
-+ */
-+ if (port->use_dma) {
-+ if (port->port_nbr == 0) {
-+ RESET_DMA(9);
-+ WAIT_DMA(9);
-+ } else {
-+ RESET_DMA(5);
-+ WAIT_DMA(5);
-+ }
-+ start_dma_in(port);
-+ }
-+ local_irq_restore(flags);
-+ return return_val;
-+}
-+
-+
-+static ssize_t sync_serial_write(struct file * file, const char * buf,
-+ size_t count, loff_t *ppos)
-+{
-+ int dev = MINOR(file->f_dentry->d_inode->i_rdev);
-+ DECLARE_WAITQUEUE(wait, current);
-+ sync_port *port;
-+ unsigned long flags;
-+ unsigned long c, c1;
-+ unsigned long free_outp;
-+ unsigned long outp;
-+ unsigned long out_buffer;
-+
-+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
-+ {
-+ DEBUG(printk("Invalid minor %d\n", dev));
-+ return -ENODEV;
-+ }
-+ port = &ports[dev];
-+
-+ DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
-+ /* Space to end of buffer */
-+ /*
-+ * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE
-+ * outp^ +out_count
-+ ^free_outp
-+ * out_buffer 45<- c ->0123OUT_BUFFER_SIZE
-+ * +out_count outp^
-+ * free_outp
-+ *
-+ */
-+
-+ /* Read variables that may be updated by interrupts */
-+ local_irq_save(flags);
-+ count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE - port->out_count : count;
-+ outp = (unsigned long)port->outp;
-+ free_outp = outp + port->out_count;
-+ local_irq_restore(flags);
-+ out_buffer = (unsigned long)port->out_buffer;
-+
-+ /* Find out where and how much to write */
-+ if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
-+ free_outp -= OUT_BUFFER_SIZE;
-+ if (free_outp >= outp)
-+ c = out_buffer + OUT_BUFFER_SIZE - free_outp;
-+ else
-+ c = outp - free_outp;
-+ if (c > count)
-+ c = count;
-+
-+// DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c));
-+ if (copy_from_user((void*)free_outp, buf, c))
-+ return -EFAULT;
-+
-+ if (c != count) {
-+ buf += c;
-+ c1 = count - c;
-+ DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1));
-+ if (copy_from_user((void*)out_buffer, buf, c1))
-+ return -EFAULT;
-+ }
-+ local_irq_save(flags);
-+ port->out_count += count;
-+ local_irq_restore(flags);
-+
-+ /* Make sure transmitter/receiver is running */
-+ if (!port->started)
-+ {
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable);
-+ port->started = 1;
-+ }
-+
-+ *port->ctrl_data = port->ctrl_data_shadow;
-+
-+ if (file->f_flags & O_NONBLOCK) {
-+ local_irq_save(flags);
-+ if (!port->tr_running) {
-+ if (!port->use_dma) {
-+ /* Start sender by writing data */
-+ send_word(port);
-+ /* and enable transmitter ready IRQ */
-+ *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit;
-+ } else {
-+ start_dma(port, (unsigned char* volatile )port->outp, c);
-+ }
-+ }
-+ local_irq_restore(flags);
-+ DEBUGWRITE(printk("w d%d c %lu NB\n",
-+ port->port_nbr, count));
-+ return count;
-+ }
-+
-+ /* Sleep until all sent */
-+
-+ add_wait_queue(&port->out_wait_q, &wait);
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ local_irq_save(flags);
-+ if (!port->tr_running) {
-+ if (!port->use_dma) {
-+ /* Start sender by writing data */
-+ send_word(port);
-+ /* and enable transmitter ready IRQ */
-+ *R_IRQ_MASK1_SET = 1 << port->transmitter_ready_bit;
-+ } else {
-+ start_dma(port, port->outp, c);
-+ }
-+ }
-+ local_irq_restore(flags);
-+ schedule();
-+ set_current_state(TASK_RUNNING);
-+ remove_wait_queue(&port->out_wait_q, &wait);
-+ if (signal_pending(current))
-+ {
-+ return -EINTR;
-+ }
-+ DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count));
-+ return count;
-+}
-+
-+static ssize_t sync_serial_read(struct file * file, char * buf,
-+ size_t count, loff_t *ppos)
-+{
-+ int dev = MINOR(file->f_dentry->d_inode->i_rdev);
-+ int avail;
-+ sync_port *port;
-+ unsigned char* start;
-+ unsigned char* end;
-+ unsigned long flags;
-+
-+ if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
-+ {
-+ DEBUG(printk("Invalid minor %d\n", dev));
-+ return -ENODEV;
-+ }
-+ port = &ports[dev];
-+
-+ DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size));
-+
-+ if (!port->started)
-+ {
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, clk_halt, running);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, tr_enable, enable);
-+ SETS(port->ctrl_data_shadow, R_SYNC_SERIAL1_CTRL, rec_enable, enable);
-+ port->started = 1;
-+ }
-+ *port->ctrl_data = port->ctrl_data_shadow;
-+
-+
-+ /* Calculate number of available bytes */
-+ /* Save pointers to avoid that they are modified by interrupt */
-+ local_irq_save(flags);
-+ start = (unsigned char*)port->readp; /* cast away volatile */
-+ end = (unsigned char*)port->writep; /* cast away volatile */
-+ local_irq_restore(flags);
-+ while ((start == end) && !port->full) /* No data */
-+ {
-+ if (file->f_flags & O_NONBLOCK)
-+ {
-+ return -EAGAIN;
-+ }
-+
-+ interruptible_sleep_on(&port->in_wait_q);
-+ if (signal_pending(current))
-+ {
-+ return -EINTR;
-+ }
-+ local_irq_save(flags);
-+ start = (unsigned char*)port->readp; /* cast away volatile */
-+ end = (unsigned char*)port->writep; /* cast away volatile */
-+ local_irq_restore(flags);
-+ }
-+
-+ /* Lazy read, never return wrapped data. */
-+ if (port->full)
-+ avail = port->in_buffer_size;
-+ else if (end > start)
-+ avail = end - start;
-+ else
-+ avail = port->flip + port->in_buffer_size - start;
-+
-+ count = count > avail ? avail : count;
-+ if (copy_to_user(buf, start, count))
-+ return -EFAULT;
-+ /* Disable interrupts while updating readp */
-+ local_irq_save(flags);
-+ port->readp += count;
-+ if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
-+ port->readp = port->flip;
-+ port->full = 0;
-+ local_irq_restore(flags);
-+ DEBUGREAD(printk("r %d\n", count));
-+ return count;
-+}
-+
-+static void send_word(sync_port* port)
-+{
-+ switch(IO_EXTRACT(R_SYNC_SERIAL1_CTRL, wordsize, port->ctrl_data_shadow))
-+ {
-+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
-+ port->out_count--;
-+ *port->data_out = *port->outp++;
-+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
-+ port->outp = port->out_buffer;
-+ break;
-+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
-+ {
-+ int data = (*port->outp++) << 8;
-+ data |= *port->outp++;
-+ port->out_count-=2;
-+ *port->data_out = data;
-+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
-+ port->outp = port->out_buffer;
-+ }
-+ break;
-+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
-+ port->out_count-=2;
-+ *port->data_out = *(unsigned short *)port->outp;
-+ port->outp+=2;
-+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
-+ port->outp = port->out_buffer;
-+ break;
-+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
-+ port->out_count-=3;
-+ *port->data_out = *(unsigned int *)port->outp;
-+ port->outp+=3;
-+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
-+ port->outp = port->out_buffer;
-+ break;
-+ case IO_STATE_VALUE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
-+ port->out_count-=4;
-+ *port->data_out = *(unsigned int *)port->outp;
-+ port->outp+=4;
-+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
-+ port->outp = port->out_buffer;
-+ break;
-+ }
-+}
-+
-+
-+static void start_dma(struct sync_port* port, const char* data, int count)
-+{
-+ port->tr_running = 1;
-+ port->out_descr.hw_len = 0;
-+ port->out_descr.next = 0;
-+ port->out_descr.ctrl = d_eol | d_eop; /* No d_wait to avoid glitches */
-+ port->out_descr.sw_len = count;
-+ port->out_descr.buf = virt_to_phys((char*)data);
-+ port->out_descr.status = 0;
-+
-+ *port->output_dma_first = virt_to_phys(&port->out_descr);
-+ *port->output_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
-+ DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count));
-+}
-+
-+static void start_dma_in(sync_port* port)
-+{
-+ int i;
-+ unsigned long buf;
-+ port->writep = port->flip;
-+
-+ if (port->writep > port->flip + port->in_buffer_size)
-+ {
-+ panic("Offset too large in sync serial driver\n");
-+ return;
-+ }
-+ buf = virt_to_phys(port->in_buffer);
-+ for (i = 0; i < NUM_IN_DESCR; i++) {
-+ port->in_descr[i].sw_len = port->inbufchunk;
-+ port->in_descr[i].ctrl = d_int;
-+ port->in_descr[i].next = virt_to_phys(&port->in_descr[i+1]);
-+ port->in_descr[i].buf = buf;
-+ port->in_descr[i].hw_len = 0;
-+ port->in_descr[i].status = 0;
-+ port->in_descr[i].fifo_len = 0;
-+ buf += port->inbufchunk;
-+ prepare_rx_descriptor(&port->in_descr[i]);
-+ }
-+ /* Link the last descriptor to the first */
-+ port->in_descr[i-1].next = virt_to_phys(&port->in_descr[0]);
-+ port->in_descr[i-1].ctrl |= d_eol;
-+ port->next_rx_desc = &port->in_descr[0];
-+ port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1];
-+ *port->input_dma_first = virt_to_phys(port->next_rx_desc);
-+ *port->input_dma_cmd = IO_STATE(R_DMA_CH0_CMD, cmd, start);
-+}
-+
-+#ifdef SYNC_SER_DMA
-+static irqreturn_t tr_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long ireg = *R_IRQ_MASK2_RD;
-+ int i;
-+ struct etrax_dma_descr *descr;
-+ unsigned int sentl;
-+ int handled = 0;
-+
-+ for (i = 0; i < NUMBER_OF_PORTS; i++)
-+ {
-+ sync_port *port = &ports[i];
-+ if (!port->enabled || !port->use_dma )
-+ continue;
-+
-+ if (ireg & (1 << port->output_dma_bit)) /* IRQ active for the port? */
-+ {
-+ handled = 1;
-+
-+ /* Clear IRQ */
-+ *port->output_dma_clr_irq =
-+ IO_STATE(R_DMA_CH0_CLR_INTR, clr_eop, do) |
-+ IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do);
-+
-+ descr = &port->out_descr;
-+ if (!(descr->status & d_stop)) {
-+ sentl = descr->sw_len;
-+ } else
-+ /* otherwise we find the amount of data sent here */
-+ sentl = descr->hw_len;
-+ port->out_count -= sentl;
-+ port->outp += sentl;
-+ if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
-+ port->outp = port->out_buffer;
-+ if (port->out_count) {
-+ int c;
-+ c = port->out_buffer + OUT_BUFFER_SIZE - port->outp;
-+ if (c > port->out_count)
-+ c = port->out_count;
-+ DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c));
-+ start_dma(port, port->outp, c);
-+ } else {
-+ DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl));
-+ port->tr_running = 0;
-+ }
-+ wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */
-+ }
-+ }
-+ return IRQ_RETVAL(handled);
-+} /* tr_interrupt */
-+
-+static irqreturn_t rx_interrupt(int irq, void *dev_id)
-+{
-+ unsigned long ireg = *R_IRQ_MASK2_RD;
-+ int i;
-+ int handled = 0;
-+
-+ for (i = 0; i < NUMBER_OF_PORTS; i++)
-+ {
-+ sync_port *port = &ports[i];
-+
-+ if (!port->enabled || !port->use_dma )
-+ continue;
-+
-+ if (ireg & (1 << port->input_dma_descr_bit)) /* Descriptor interrupt */
-+ {
-+ handled = 1;
-+ while (*port->input_dma_descr != virt_to_phys(port->next_rx_desc)) {
-+
-+ if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) {
-+ int first_size = port->flip + port->in_buffer_size - port->writep;
-+ memcpy(port->writep, phys_to_virt(port->next_rx_desc->buf), first_size);
-+ memcpy(port->flip, phys_to_virt(port->next_rx_desc->buf+first_size), port->inbufchunk - first_size);
-+ port->writep = port->flip + port->inbufchunk - first_size;
-+ } else {
-+ memcpy(port->writep, phys_to_virt(port->next_rx_desc->buf), port->inbufchunk);
-+ port->writep += port->inbufchunk;
-+ if (port->writep >= port->flip + port->in_buffer_size)
-+ port->writep = port->flip;
-+ }
-+ if (port->writep == port->readp)
-+ {
-+ port->full = 1;
-+ }
-+
-+ prepare_rx_descriptor(port->next_rx_desc);
-+ port->next_rx_desc->ctrl |= d_eol;
-+ port->prev_rx_desc->ctrl &= ~d_eol;
-+ port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc);
-+ port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next);
-+ wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */
-+ *port->input_dma_cmd = IO_STATE(R_DMA_CH1_CMD, cmd, restart);
-+ /* DMA has reached end of descriptor */
-+ *port->input_dma_clr_irq =
-+ IO_STATE(R_DMA_CH0_CLR_INTR, clr_descr, do);
-+ }
-+ }
-+ }
-+
-+ return IRQ_RETVAL(handled);
-+} /* rx_interrupt */
-+#endif /* SYNC_SER_DMA */
-+
-+#ifdef SYNC_SER_MANUAL
-+static irqreturn_t manual_interrupt(int irq, void *dev_id)
-+{
-+ int i;
-+ int handled = 0;
-+
-+ for (i = 0; i < NUMBER_OF_PORTS; i++)
-+ {
-+ sync_port* port = &ports[i];
-+
-+ if (!port->enabled || port->use_dma)
-+ {
-+ continue;
-+ }
-+
-+ if (*R_IRQ_MASK1_RD & (1 << port->data_avail_bit)) /* Data received? */
-+ {
-+ handled = 1;
-+ /* Read data */
-+ switch(port->ctrl_data_shadow & IO_MASK(R_SYNC_SERIAL1_CTRL, wordsize))
-+ {
-+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size8bit):
-+ *port->writep++ = *(volatile char *)port->data_in;
-+ break;
-+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size12bit):
-+ {
-+ int data = *(unsigned short *)port->data_in;
-+ *port->writep = (data & 0x0ff0) >> 4;
-+ *(port->writep + 1) = data & 0x0f;
-+ port->writep+=2;
-+ }
-+ break;
-+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size16bit):
-+ *(unsigned short*)port->writep = *(volatile unsigned short *)port->data_in;
-+ port->writep+=2;
-+ break;
-+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size24bit):
-+ *(unsigned int*)port->writep = *port->data_in;
-+ port->writep+=3;
-+ break;
-+ case IO_STATE(R_SYNC_SERIAL1_CTRL, wordsize, size32bit):
-+ *(unsigned int*)port->writep = *port->data_in;
-+ port->writep+=4;
-+ break;
-+ }
-+
-+ if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */
-+ port->writep = port->flip;
-+ if (port->writep == port->readp) {
-+ /* receive buffer overrun, discard oldest data
-+ */
-+ port->readp++;
-+ if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
-+ port->readp = port->flip;
-+ }
-+ if (sync_data_avail(port) >= port->inbufchunk)
-+ wake_up_interruptible(&port->in_wait_q); /* Wake up application */
-+ }
-+
-+ if (*R_IRQ_MASK1_RD & (1 << port->transmitter_ready_bit)) /* Transmitter ready? */
-+ {
-+ if (port->out_count > 0) /* More data to send */
-+ send_word(port);
-+ else /* transmission finished */
-+ {
-+ *R_IRQ_MASK1_CLR = 1 << port->transmitter_ready_bit; /* Turn off IRQ */
-+ wake_up_interruptible(&port->out_wait_q); /* Wake up application */
-+ }
-+ }
-+ }
-+ return IRQ_RETVAL(handled);
-+}
-+#endif
-+
-+module_init(etrax_sync_serial_init);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/debugport.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/debugport.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/debugport.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/debugport.c 2006-10-30 16:17:57.000000000 +0100
-@@ -12,6 +12,34 @@
- * init_etrax_debug()
- *
- * $Log: debugport.c,v $
-+ * Revision 1.36 2006/10/30 15:17:57 pkj
-+ * Avoid a compiler warning.
-+ *
-+ * Revision 1.35 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.34 2006/09/29 10:32:01 starvik
-+ * Don't reference serial driver if not present
-+ *
-+ * Revision 1.33 2006/09/08 07:59:29 karljope
-+ * Makes v10 boot again when watchdog is enabled
-+ *
-+ * Revision 1.32 2006/06/20 08:23:36 pkj
-+ * Reverted incorrect merge.
-+ *
-+ * Revision 1.31 2006/05/17 12:22:10 edgar
-+ * check port before disable ints
-+ *
-+ * Revision 1.30 2005/11/15 12:08:42 starvik
-+ * Set index when no debug port is defined
-+ *
-+ * Revision 1.29 2005/08/29 07:32:17 starvik
-+ * Merge of 2.6.13
-+ *
-+ * Revision 1.28 2005/07/02 12:29:35 starvik
-+ * Use the generic oops_in_progress instead of the raw_printk hack.
-+ * Moved some functions to achr-independent code.
-+ *
- * Revision 1.27 2005/06/10 10:34:14 starvik
- * Real console support
- *
-@@ -112,6 +140,8 @@
- #include <asm/arch/svinto.h>
- #include <asm/io.h> /* Get SIMCOUT. */
-
-+extern void reset_watchdog(void);
-+
- struct dbg_port
- {
- unsigned int index;
-@@ -188,7 +218,9 @@
- }
- };
-
-+#ifdef CONFIG_ETRAX_SERIAL
- extern struct tty_driver *serial_driver;
-+#endif
-
- struct dbg_port* port =
- #if defined(CONFIG_ETRAX_DEBUG_PORT0)
-@@ -368,11 +400,12 @@
- {
- int i;
- unsigned long flags;
-- local_irq_save(flags);
--
-+
- if (!port)
- return;
--
-+
-+ local_irq_save(flags);
-+
- /* Send data */
- for (i = 0; i < len; i++) {
- /* LF -> CRLF */
-@@ -386,26 +419,16 @@
- ;
- *port->write = buf[i];
- }
-- local_irq_restore(flags);
--}
-
--int raw_printk(const char *fmt, ...)
--{
-- static char buf[1024];
-- int printed_len;
-- static int first = 1;
-- if (first) {
-- /* Force reinitialization of the port to get manual mode. */
-- port->started = 0;
-- start_port(port);
-- first = 0;
-- }
-- va_list args;
-- va_start(args, fmt);
-- printed_len = vsnprintf(buf, sizeof(buf), fmt, args);
-- va_end(args);
-- console_write_direct(NULL, buf, strlen(buf));
-- return printed_len;
-+ /*
-+ * Feed the watchdog, otherwise it will reset the chip during boot.
-+ * The time to send an ordinary boot message line (10-90 chars)
-+ * varies between 1-8ms at 115200. What makes up for the additional
-+ * 90ms that allows the watchdog to bite?
-+ */
-+ reset_watchdog();
-+
-+ local_irq_restore(flags);
- }
-
- static void
-@@ -500,6 +523,7 @@
- return 0;
- }
-
-+
- /* This is a dummy serial device that throws away anything written to it.
- * This is used when no debug output is wanted.
- */
-@@ -555,7 +579,13 @@
- {
- if (port)
- *index = port->index;
-+ else
-+ *index = 0;
-+#ifdef CONFIG_ETRAX_SERIAL
- return port ? serial_driver : &dummy_driver;
-+#else
-+ return &dummy_driver;
-+#endif
- }
-
- static struct console sercons = {
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/entry.S linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/entry.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/entry.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/entry.S 2007-01-09 10:36:17.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: entry.S,v 1.28 2005/06/20 05:06:30 starvik Exp $
-+/* $Id: entry.S,v 1.38 2007/01/09 09:36:17 starvik Exp $
- *
- * linux/arch/cris/entry.S
- *
-@@ -7,6 +7,41 @@
- * Authors: Bjorn Wesen (bjornw@axis.com)
- *
- * $Log: entry.S,v $
-+ * Revision 1.38 2007/01/09 09:36:17 starvik
-+ * Corrected kernel_execve
-+ *
-+ * Revision 1.37 2007/01/09 09:29:18 starvik
-+ * Merge of Linux 2.6.19
-+ *
-+ * Revision 1.36 2006/12/08 13:08:54 orjanf
-+ * Copied from Linux 2.4:
-+ * * Return from an pin-generated NMI the same way as for other interrupts.
-+ * * Reverse check order between external nmi and watchdog nmi to avoid false
-+ * watchdog oops in case of a glitch on the nmi pin.
-+ *
-+ * Revision 1.35 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.34 2006/06/25 15:00:09 starvik
-+ * Merge of Linux 2.6.17
-+ *
-+ * Revision 1.33 2006/05/19 12:23:09 orjanf
-+ * * Moved blocking of ethernet rx/tx irq from ethernet interrupt handler to
-+ * low-level asm interrupt handlers. Fixed in the multiple interrupt handler
-+ * also. Copied from Linux 2.4.
-+ *
-+ * Revision 1.32 2006/03/23 14:53:57 starvik
-+ * Corrected signal handling.
-+ *
-+ * Revision 1.31 2006/03/22 09:56:55 starvik
-+ * Merge of Linux 2.6.16
-+ *
-+ * Revision 1.30 2005/10/31 08:48:03 starvik
-+ * Merge of Linux 2.6.14
-+ *
-+ * Revision 1.29 2005/08/29 07:32:17 starvik
-+ * Merge of 2.6.13
-+ *
- * Revision 1.28 2005/06/20 05:06:30 starvik
- * Remove unnecessary diff to kernel.org tree
- *
-@@ -500,9 +535,8 @@
- ;; deal with pending signals and notify-resume requests
-
- move.d $r9, $r10 ; do_notify_resume syscall/irq param
-- moveq 0, $r11 ; oldset param - 0 in this case
-- move.d $sp, $r12 ; the regs param
-- move.d $r1, $r13 ; the thread_info_flags parameter
-+ move.d $sp, $r11 ; the regs param
-+ move.d $r1, $r12 ; the thread_info_flags parameter
- jsr do_notify_resume
-
- ba _Rexit
-@@ -653,7 +687,7 @@
- ;; special handlers for breakpoint and NMI
- hwbreakpoint:
- push $dccr
-- di
-+ di
- push $r10
- push $r11
- move.d [hw_bp_trig_ptr],$r10
-@@ -678,13 +712,19 @@
- push $r10 ; push orig_r10
- clear.d [$sp=$sp-4] ; frametype == 0, normal frame
-
-+ ;; If there is a glitch on the NMI pin shorter than ~100ns
-+ ;; (i.e. non-active by the time we get here) then the nmi_pin bit
-+ ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit
-+ ;; is cleared by us however (when feeding the watchdog), which is why
-+ ;; we use that bit to determine what brought us here.
-+
- move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
-- and.d 0x80000000, $r1
-- beq wdog
-+ and.d (1<<30), $r1
-+ bne wdog
- move.d $sp, $r10
- jsr handle_nmi
- setf m ; Enable NMI again
-- retb ; Return from NMI
-+ ba _Rexit ; Return the standard way
- nop
- wdog:
- #if defined(CONFIG_ETRAX_WATCHDOG) && !defined(CONFIG_SVINTO_SIM)
-@@ -774,23 +814,10 @@
- movem $r13, [$sp]
- push $r10 ; push orig_r10
- clear.d [$sp=$sp-4] ; frametype == 0, normal frame
--
-- moveq 2, $r2 ; first bit we care about is the timer0 irq
-- move.d [R_VECT_MASK_RD], $r0; read the irq bits that triggered the multiple irq
-- move.d $r0, [R_VECT_MASK_CLR] ; Block all active IRQs
--1:
-- btst $r2, $r0 ; check for the irq given by bit r2
-- bpl 2f
-- move.d $r2, $r10 ; First argument to do_IRQ
-- move.d $sp, $r11 ; second argument to do_IRQ
-- jsr do_IRQ
--2:
-- addq 1, $r2 ; next vector bit
-- cmp.b 32, $r2
-- bne 1b ; process all irq's up to and including number 31
-- moveq 0, $r9 ; make ret_from_intr realise we came from an ir
--
-- move.d $r0, [R_VECT_MASK_SET] ; Unblock all the IRQs
-+
-+ move.d $sp, $r10
-+ jsr do_multiple_IRQ
-+
- jump ret_from_intr
-
- do_sigtrap:
-@@ -836,6 +863,13 @@
- pop $r0 ; Restore r0.
- ba do_sigtrap ; SIGTRAP the offending process.
- pop $dccr ; Restore dccr in delay slot.
-+
-+ .global kernel_execve
-+kernel_execve:
-+ move.d __NR_execve, $r9
-+ break 13
-+ ret
-+ nop
-
- .data
-
-@@ -1135,7 +1169,38 @@
- .long sys_add_key
- .long sys_request_key
- .long sys_keyctl
--
-+ .long sys_ioprio_set
-+ .long sys_ioprio_get /* 290 */
-+ .long sys_inotify_init
-+ .long sys_inotify_add_watch
-+ .long sys_inotify_rm_watch
-+ .long sys_migrate_pages
-+ .long sys_openat /* 295 */
-+ .long sys_mkdirat
-+ .long sys_mknodat
-+ .long sys_fchownat
-+ .long sys_futimesat
-+ .long sys_fstatat64 /* 300 */
-+ .long sys_unlinkat
-+ .long sys_renameat
-+ .long sys_linkat
-+ .long sys_symlinkat
-+ .long sys_readlinkat /* 305 */
-+ .long sys_fchmodat
-+ .long sys_faccessat
-+ .long sys_pselect6
-+ .long sys_ppoll
-+ .long sys_unshare /* 310 */
-+ .long sys_set_robust_list
-+ .long sys_get_robust_list
-+ .long sys_splice
-+ .long sys_sync_file_range
-+ .long sys_tee /* 315 */
-+ .long sys_vmsplice
-+ .long sys_move_pages
-+ .long sys_getcpu
-+ .long sys_epoll_pwait
-+
- /*
- * NOTE!! This doesn't have to be exact - we just have
- * to make sure we have _enough_ of the "sys_ni_syscall"
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/fasttimer.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/fasttimer.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/fasttimer.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/fasttimer.c 2007-02-05 12:54:34.000000000 +0100
-@@ -1,97 +1,10 @@
--/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
-+/*
- * linux/arch/cris/kernel/fasttimer.c
- *
- * Fast timers for ETRAX100/ETRAX100LX
- * This may be useful in other OS than Linux so use 2 space indentation...
- *
-- * $Log: fasttimer.c,v $
-- * Revision 1.9 2005/03/04 08:16:16 starvik
-- * Merge of Linux 2.6.11.
-- *
-- * Revision 1.8 2005/01/05 06:09:29 starvik
-- * cli()/sti() will be obsolete in 2.6.11.
-- *
-- * Revision 1.7 2005/01/03 13:35:46 starvik
-- * Removed obsolete stuff.
-- * Mark fast timer IRQ as not shared.
-- *
-- * Revision 1.6 2004/05/14 10:18:39 starvik
-- * Export fast_timer_list
-- *
-- * Revision 1.5 2004/05/14 07:58:01 starvik
-- * Merge of changes from 2.4
-- *
-- * Revision 1.4 2003/07/04 08:27:41 starvik
-- * Merge of Linux 2.5.74
-- *
-- * Revision 1.3 2002/12/12 08:26:32 starvik
-- * Don't use C-comments inside CVS comments
-- *
-- * Revision 1.2 2002/12/11 15:42:02 starvik
-- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
-- *
-- * Revision 1.1 2002/11/18 07:58:06 starvik
-- * Fast timers (from Linux 2.4)
-- *
-- * Revision 1.5 2002/10/15 06:21:39 starvik
-- * Added call to init_waitqueue_head
-- *
-- * Revision 1.4 2002/05/28 17:47:59 johana
-- * Added del_fast_timer()
-- *
-- * Revision 1.3 2002/05/28 16:16:07 johana
-- * Handle empty fast_timer_list
-- *
-- * Revision 1.2 2002/05/27 15:38:42 johana
-- * Made it compile without warnings on Linux 2.4.
-- * (includes, wait_queue, PROC_FS and snprintf)
-- *
-- * Revision 1.1 2002/05/27 15:32:25 johana
-- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
-- *
-- * Revision 1.8 2001/11/27 13:50:40 pkj
-- * Disable interrupts while stopping the timer and while modifying the
-- * list of active timers in timer1_handler() as it may be interrupted
-- * by other interrupts (e.g., the serial interrupt) which may add fast
-- * timers.
-- *
-- * Revision 1.7 2001/11/22 11:50:32 pkj
-- * * Only store information about the last 16 timers.
-- * * proc_fasttimer_read() now uses an allocated buffer, since it
-- * requires more space than just a page even for only writing the
-- * last 16 timers. The buffer is only allocated on request, so
-- * unless /proc/fasttimer is read, it is never allocated.
-- * * Renamed fast_timer_started to fast_timers_started to match
-- * fast_timers_added and fast_timers_expired.
-- * * Some clean-up.
-- *
-- * Revision 1.6 2000/12/13 14:02:08 johana
-- * Removed volatile for fast_timer_list
-- *
-- * Revision 1.5 2000/12/13 13:55:35 johana
-- * Added DEBUG_LOG, added som cli() and cleanup
-- *
-- * Revision 1.4 2000/12/05 13:48:50 johana
-- * Added range check when writing proc file, modified timer int handling
-- *
-- * Revision 1.3 2000/11/23 10:10:20 johana
-- * More debug/logging possibilities.
-- * Moved GET_JIFFIES_USEC() to timex.h and time.c
-- *
-- * Revision 1.2 2000/11/01 13:41:04 johana
-- * Clean up and bugfixes.
-- * Created new do_gettimeofday_fast() that gets a timeval struct
-- * with time based on jiffies and *R_TIMER0_DATA, uses a table
-- * for fast conversion of timer value to microseconds.
-- * (Much faster the standard do_gettimeofday() and we don't really
-- * wan't to use the true time - we wan't the "uptime" so timers don't screw up
-- * when we change the time.
-- * TODO: Add efficient support for continuous timers as well.
-- *
-- * Revision 1.1 2000/10/26 15:49:16 johana
-- * Added fasttimer, highresolution timers.
-- *
-- * Copyright (C) 2000,2001 2002 Axis Communications AB, Lund, Sweden
-+ * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden
- */
-
- #include <linux/errno.h>
-@@ -136,13 +49,13 @@
-
- #define __INLINE__ inline
-
--static int fast_timer_running = 0;
--static int fast_timers_added = 0;
--static int fast_timers_started = 0;
--static int fast_timers_expired = 0;
--static int fast_timers_deleted = 0;
--static int fast_timer_is_init = 0;
--static int fast_timer_ints = 0;
-+static unsigned int fast_timer_running = 0;
-+static unsigned int fast_timers_added = 0;
-+static unsigned int fast_timers_started = 0;
-+static unsigned int fast_timers_expired = 0;
-+static unsigned int fast_timers_deleted = 0;
-+static unsigned int fast_timer_is_init = 0;
-+static unsigned int fast_timer_ints = 0;
-
- struct fast_timer *fast_timer_list = NULL;
-
-@@ -150,8 +63,8 @@
- #define DEBUG_LOG_MAX 128
- static const char * debug_log_string[DEBUG_LOG_MAX];
- static unsigned long debug_log_value[DEBUG_LOG_MAX];
--static int debug_log_cnt = 0;
--static int debug_log_cnt_wrapped = 0;
-+static unsigned int debug_log_cnt = 0;
-+static unsigned int debug_log_cnt_wrapped = 0;
-
- #define DEBUG_LOG(string, value) \
- { \
-@@ -206,41 +119,25 @@
- int timer_delay_settings[NUM_TIMER_STATS];
-
- /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
--void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
-+void __INLINE__ do_gettimeofday_fast(struct fasttime_t *tv)
- {
-- unsigned long sec = jiffies;
-- unsigned long usec = GET_JIFFIES_USEC();
--
-- usec += (sec % HZ) * (1000000 / HZ);
-- sec = sec / HZ;
--
-- if (usec > 1000000)
-- {
-- usec -= 1000000;
-- sec++;
-- }
-- tv->tv_sec = sec;
-- tv->tv_usec = usec;
-+ tv->tv_jiff = jiffies;
-+ tv->tv_usec = GET_JIFFIES_USEC();
- }
-
--int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
-+int __INLINE__ timeval_cmp(struct fasttime_t *t0, struct fasttime_t *t1)
- {
-- if (t0->tv_sec < t1->tv_sec)
-- {
-+ /* Compare jiffies. Takes care of wrapping */
-+ if (time_before(t0->tv_jiff, t1->tv_jiff))
- return -1;
-- }
-- else if (t0->tv_sec > t1->tv_sec)
-- {
-+ else if (time_after(t0->tv_jiff, t1->tv_jiff))
- return 1;
-- }
-+
-+ /* Compare us */
- if (t0->tv_usec < t1->tv_usec)
-- {
- return -1;
-- }
- else if (t0->tv_usec > t1->tv_usec)
-- {
- return 1;
-- }
- return 0;
- }
-
-@@ -340,7 +237,7 @@
- printk(KERN_WARNING
- "timer name: %s data: 0x%08lX already in list!\n", name, data);
- sanity_failed++;
-- return;
-+ goto done;
- }
- else
- {
-@@ -356,11 +253,11 @@
- t->name = name;
-
- t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
-- t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000;
-+ t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ;
- if (t->tv_expires.tv_usec > 1000000)
- {
- t->tv_expires.tv_usec -= 1000000;
-- t->tv_expires.tv_sec++;
-+ t->tv_expires.tv_jiff += HZ;
- }
- #ifdef FAST_TIMER_LOG
- timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
-@@ -401,6 +298,7 @@
-
- D2(printk("start_one_shot_timer: %d us done\n", delay_us));
-
-+done:
- local_irq_restore(flags);
- } /* start_one_shot_timer */
-
-@@ -444,11 +342,18 @@
- /* Timer 1 interrupt handler */
-
- static irqreturn_t
--timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
-+timer1_handler(int irq, void *dev_id)
- {
- struct fast_timer *t;
- unsigned long flags;
-
-+ /* We keep interrupts disabled not only when we modify the
-+ * fast timer list, but any time we hold a reference to a
-+ * timer in the list, since del_fast_timer may be called
-+ * from (another) interrupt context. Thus, the only time
-+ * when interrupts are enabled is when calling the timer
-+ * callback function.
-+ */
- local_irq_save(flags);
-
- /* Clear timer1 irq */
-@@ -466,16 +371,16 @@
- fast_timer_running = 0;
- fast_timer_ints++;
-
-- local_irq_restore(flags);
--
- t = fast_timer_list;
- while (t)
- {
-- struct timeval tv;
-+ struct fasttime_t tv;
-+ fast_timer_function_type *f;
-+ unsigned long d;
-
- /* Has it really expired? */
- do_gettimeofday_fast(&tv);
-- D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
-+ D1(printk("t: %is %06ius\n", tv.tv_jiff, tv.tv_usec));
-
- if (timeval_cmp(&t->tv_expires, &tv) <= 0)
- {
-@@ -486,7 +391,6 @@
- fast_timers_expired++;
-
- /* Remove this timer before call, since it may reuse the timer */
-- local_irq_save(flags);
- if (t->prev)
- {
- t->prev->next = t->next;
-@@ -501,11 +405,21 @@
- }
- t->prev = NULL;
- t->next = NULL;
-- local_irq_restore(flags);
-
-- if (t->function != NULL)
-+ /* Save function callback data before enabling interrupts,
-+ * since the timer may be removed and we don't know how it
-+ * was allocated (e.g. ->function and ->data may become
-+ * overwritten after deletion if the timer was stack-allocated).
-+ */
-+ f = t->function;
-+ d = t->data;
-+
-+ if (f != NULL)
- {
-- t->function(t->data);
-+ /* Run the callback function with interrupts enabled. */
-+ local_irq_restore(flags);
-+ f(d);
-+ local_irq_save(flags);
- }
- else
- {
-@@ -518,16 +432,19 @@
- D1(printk(".\n"));
- }
-
-- local_irq_save(flags);
- if ((t = fast_timer_list) != NULL)
- {
- /* Start next timer.. */
-- long us;
-- struct timeval tv;
-+ long us = 0;
-+ struct fasttime_t tv;
-
- do_gettimeofday_fast(&tv);
-- us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
-- t->tv_expires.tv_usec - tv.tv_usec);
-+
-+ /* time_after_eq takes care of wrapping */
-+ if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff))
-+ us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * 1000000 / HZ +
-+ t->tv_expires.tv_usec - tv.tv_usec);
-+
- if (us > 0)
- {
- if (!fast_timer_running)
-@@ -537,7 +454,6 @@
- #endif
- start_timer1(us);
- }
-- local_irq_restore(flags);
- break;
- }
- else
-@@ -548,9 +464,10 @@
- D1(printk("e! %d\n", us));
- }
- }
-- local_irq_restore(flags);
- }
-
-+ local_irq_restore(flags);
-+
- if (!t)
- {
- D1(printk("t1 stop!\n"));
-@@ -575,28 +492,17 @@
- void schedule_usleep(unsigned long us)
- {
- struct fast_timer t;
--#ifdef DECLARE_WAITQUEUE
- wait_queue_head_t sleep_wait;
- init_waitqueue_head(&sleep_wait);
-- {
-- DECLARE_WAITQUEUE(wait, current);
--#else
-- struct wait_queue *sleep_wait = NULL;
-- struct wait_queue wait = { current, NULL };
--#endif
-
- D1(printk("schedule_usleep(%d)\n", us));
-- add_wait_queue(&sleep_wait, &wait);
-- set_current_state(TASK_INTERRUPTIBLE);
- start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
- "usleep");
-- schedule();
-- set_current_state(TASK_RUNNING);
-- remove_wait_queue(&sleep_wait, &wait);
-+ /* Uninterruptible sleep on the fast timer. (The condition is somewhat
-+ redundant since the timer is what wakes us up.) */
-+ wait_event(sleep_wait, !fast_timer_pending(&t));
-+
- D1(printk("done schedule_usleep(%d)\n", us));
--#ifdef DECLARE_WAITQUEUE
-- }
--#endif
- }
-
- #ifdef CONFIG_PROC_FS
-@@ -616,7 +522,7 @@
- unsigned long flags;
- int i = 0;
- int num_to_show;
-- struct timeval tv;
-+ struct fasttime_t tv;
- struct fast_timer *t, *nextt;
- static char *bigbuf = NULL;
- static unsigned long used;
-@@ -624,7 +530,8 @@
- if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
- {
- used = 0;
-- bigbuf[0] = '\0';
-+ if (buf)
-+ buf[0] = '\0';
- return 0;
- }
-
-@@ -646,7 +553,7 @@
- used += sprintf(bigbuf + used, "Fast timer running: %s\n",
- fast_timer_running ? "yes" : "no");
- used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n",
-- (unsigned long)tv.tv_sec,
-+ (unsigned long)tv.tv_jiff,
- (unsigned long)tv.tv_usec);
- #ifdef FAST_TIMER_SANITY_CHECKS
- used += sprintf(bigbuf + used, "Sanity failed: %i\n",
-@@ -696,9 +603,9 @@
- "d: %6li us data: 0x%08lX"
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
-@@ -718,9 +625,9 @@
- "d: %6li us data: 0x%08lX"
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
-@@ -738,9 +645,9 @@
- "d: %6li us data: 0x%08lX"
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
-@@ -761,15 +668,15 @@
- /* " func: 0x%08lX" */
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
- /* , t->function */
- );
-- local_irq_disable();
-+ local_irq_save(flags);
- if (t->next != nextt)
- {
- printk(KERN_WARNING "timer removed!\n");
-@@ -798,7 +705,7 @@
- static struct fast_timer tr[10];
- static int exp_num[10];
-
--static struct timeval tv_exp[100];
-+static struct fasttime_t tv_exp[100];
-
- static void test_timeout(unsigned long data)
- {
-@@ -836,7 +743,7 @@
- int prev_num;
- int j;
-
-- struct timeval tv, tv0, tv1, tv2;
-+ struct fasttime_t tv, tv0, tv1, tv2;
-
- printk("fast_timer_test() start\n");
- do_gettimeofday_fast(&tv);
-@@ -849,7 +756,7 @@
- {
- do_gettimeofday_fast(&tv_exp[j]);
- }
-- printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
-+ printk("fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec);
-
- for (j = 0; j < 1000; j++)
- {
-@@ -859,11 +766,11 @@
- for (j = 0; j < 100; j++)
- {
- printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
-- tv_exp[j].tv_sec,tv_exp[j].tv_usec,
-- tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
-- tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
-- tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
-- tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
-+ tv_exp[j].tv_jiff,tv_exp[j].tv_usec,
-+ tv_exp[j+1].tv_jiff,tv_exp[j+1].tv_usec,
-+ tv_exp[j+2].tv_jiff,tv_exp[j+2].tv_usec,
-+ tv_exp[j+3].tv_jiff,tv_exp[j+3].tv_usec,
-+ tv_exp[j+4].tv_jiff,tv_exp[j+4].tv_usec);
- j += 4;
- }
- do_gettimeofday_fast(&tv0);
-@@ -895,9 +802,9 @@
- }
- }
- do_gettimeofday_fast(&tv2);
-- printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec);
-- printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
-- printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec);
-+ printk("Timers started %is %06i\n", tv0.tv_jiff, tv0.tv_usec);
-+ printk("Timers started at %is %06i\n", tv1.tv_jiff, tv1.tv_usec);
-+ printk("Timers done %is %06i\n", tv2.tv_jiff, tv2.tv_usec);
- DP(printk("buf0:\n");
- printk(buf0);
- printk("buf1:\n");
-@@ -919,9 +826,9 @@
- printk("%-10s set: %6is %06ius exp: %6is %06ius "
- "data: 0x%08X func: 0x%08X\n",
- t->name,
-- t->tv_set.tv_sec,
-+ t->tv_set.tv_jiff,
- t->tv_set.tv_usec,
-- t->tv_expires.tv_sec,
-+ t->tv_expires.tv_jiff,
- t->tv_expires.tv_usec,
- t->data,
- t->function
-@@ -929,10 +836,10 @@
-
- printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n",
- t->delay_us,
-- tv_exp[j].tv_sec,
-+ tv_exp[j].tv_jiff,
- tv_exp[j].tv_usec,
- exp_num[j],
-- (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
-+ (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
- }
- proc_fasttimer_read(buf5, NULL, 0, 0, 0);
- printk("buf5 after all done:\n");
-@@ -942,7 +849,7 @@
- #endif
-
-
--void fast_timer_init(void)
-+int fast_timer_init(void)
- {
- /* For some reason, request_irq() hangs when called froom time_init() */
- if (!fast_timer_is_init)
-@@ -975,4 +882,6 @@
- fast_timer_test();
- #endif
- }
-+ return 0;
- }
-+__initcall(fast_timer_init);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/head.S linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/head.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/head.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/head.S 2006-10-20 09:33:26.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: head.S,v 1.10 2005/06/20 05:12:54 starvik Exp $
-+/* $Id: head.S,v 1.13 2006/10/20 07:33:26 kjelld Exp $
- *
- * Head of the kernel - alter with care
- *
-@@ -7,6 +7,19 @@
- * Authors: Bjorn Wesen (bjornw@axis.com)
- *
- * $Log: head.S,v $
-+ * Revision 1.13 2006/10/20 07:33:26 kjelld
-+ * If serial port 2 is used, select it in R_GEN_CONFIG.
-+ * If serial port 2 is used, setup the control registers for the port.
-+ * This is done to avoid a puls on the TXD line during start up.
-+ * This puls could disturbe some units (e.g. some Axis 214 with internal
-+ * ver. 1.08).
-+ *
-+ * Revision 1.12 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
-+ * Revision 1.11 2005/08/29 07:32:17 starvik
-+ * Merge of 2.6.13
-+ *
- * Revision 1.10 2005/06/20 05:12:54 starvik
- * Remove unnecessary diff to kernel.org tree
- *
-@@ -595,11 +608,17 @@
-
- moveq 0,$r0
-
-+ ;; Select or disable serial port 2
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ or.d IO_STATE (R_GEN_CONFIG, ser2, select),$r0
-+#else
-+ or.d IO_STATE (R_GEN_CONFIG, ser2, disable),$r0
-+#endif
-+
- ;; Init interfaces (disable them).
- or.d IO_STATE (R_GEN_CONFIG, scsi0, disable) \
- | IO_STATE (R_GEN_CONFIG, ata, disable) \
- | IO_STATE (R_GEN_CONFIG, par0, disable) \
-- | IO_STATE (R_GEN_CONFIG, ser2, disable) \
- | IO_STATE (R_GEN_CONFIG, mio, disable) \
- | IO_STATE (R_GEN_CONFIG, scsi1, disable) \
- | IO_STATE (R_GEN_CONFIG, scsi0w, disable) \
-@@ -801,6 +820,41 @@
- | IO_STATE (R_SERIAL1_TR_CTRL, tr_bitnr, tr_8bit),$r0
- move.b $r0,[R_SERIAL1_TR_CTRL]
-
-+#ifdef CONFIG_ETRAX_SERIAL_PORT2
-+ ;; setup the serial port 2 at 115200 baud for debug purposes
-+
-+ moveq IO_STATE (R_SERIAL2_XOFF, tx_stop, enable) \
-+ | IO_STATE (R_SERIAL2_XOFF, auto_xoff, disable) \
-+ | IO_FIELD (R_SERIAL2_XOFF, xoff_char, 0),$r0
-+ move.d $r0,[R_SERIAL2_XOFF]
-+
-+ ; 115.2kbaud for both transmit and receive
-+ move.b IO_STATE (R_SERIAL2_BAUD, tr_baud, c115k2Hz) \
-+ | IO_STATE (R_SERIAL2_BAUD, rec_baud, c115k2Hz),$r0
-+ move.b $r0,[R_SERIAL2_BAUD]
-+
-+ ; Set up and enable the serial2 receiver.
-+ move.b IO_STATE (R_SERIAL2_REC_CTRL, dma_err, stop) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_enable, enable) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, rts_, active) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, sampling, middle) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_stick_par, normal) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_par, even) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_par_en, disable) \
-+ | IO_STATE (R_SERIAL2_REC_CTRL, rec_bitnr, rec_8bit),$r0
-+ move.b $r0,[R_SERIAL2_REC_CTRL]
-+
-+ ; Set up and enable the serial2 transmitter.
-+ move.b IO_FIELD (R_SERIAL2_TR_CTRL, txd, 0) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_enable, enable) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, auto_cts, disabled) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, stop_bits, one_bit) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_stick_par, normal) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_par, even) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_par_en, disable) \
-+ | IO_STATE (R_SERIAL2_TR_CTRL, tr_bitnr, tr_8bit),$r0
-+ move.b $r0,[R_SERIAL2_TR_CTRL]
-+#endif
-
- #ifdef CONFIG_ETRAX_SERIAL_PORT3
- ;; setup the serial port 3 at 115200 baud for debug purposes
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/io_interface_mux.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/io_interface_mux.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/io_interface_mux.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/io_interface_mux.c 2006-10-04 20:21:18.000000000 +0200
-@@ -1,10 +1,10 @@
- /* IO interface mux allocator for ETRAX100LX.
-- * Copyright 2004, Axis Communications AB
-- * $Id: io_interface_mux.c,v 1.2 2004/12/21 12:08:38 starvik Exp $
-+ * Copyright 2004-2006, Axis Communications AB
-+ * $Id: io_interface_mux.c,v 1.4 2006/10/04 18:21:18 henriken Exp $
- */
-
-
--/* C.f. ETRAX100LX Designer's Reference 20.9 */
-+/* C.f. ETRAX100LX Designer's Reference 19.9 */
-
- #include <linux/kernel.h>
- #include <linux/slab.h>
-@@ -35,7 +35,7 @@
- struct watcher
- {
- void (*notify)(const unsigned int gpio_in_available,
-- const unsigned int gpio_out_available,
-+ const unsigned int gpio_out_available,
- const unsigned char pa_available,
- const unsigned char pb_available);
- struct watcher *next;
-@@ -45,17 +45,40 @@
- struct if_group
- {
- enum io_if_group group;
-- unsigned char used;
-- enum cris_io_interface owner;
-+ // name - the name of the group 'A' to 'F'
-+ char *name;
-+ // used - a bit mask of all pins in the group in the order listed
-+ // in in the tables in 19.9.1 to 19.9.6. Note that no
-+ // distinction is made between in, out and in/out pins.
-+ unsigned int used;
- };
-
-
- struct interface
- {
- enum cris_io_interface ioif;
-+ // name - the name of the interface
-+ char *name;
-+ // groups - OR'ed together io_if_group flags describing what pin groups
-+ // the interface uses pins in.
- unsigned char groups;
-+ // used - set when the interface is allocated.
- unsigned char used;
- char *owner;
-+ // group_a through group_f - bit masks describing what pins in the
-+ // pin groups the interface uses.
-+ unsigned int group_a;
-+ unsigned int group_b;
-+ unsigned int group_c;
-+ unsigned int group_d;
-+ unsigned int group_e;
-+ unsigned int group_f;
-+
-+ // gpio_g_in, gpio_g_out, gpio_b - bit masks telling what pins in the
-+ // GPIO ports the interface uses. This
-+ // could be reconstucted using the group_X
-+ // masks and a table of what pins the GPIO
-+ // ports use, but that would be messy.
- unsigned int gpio_g_in;
- unsigned int gpio_g_out;
- unsigned char gpio_b;
-@@ -64,26 +87,32 @@
- static struct if_group if_groups[6] = {
- {
- .group = group_a,
-+ .name = "A",
- .used = 0,
- },
- {
- .group = group_b,
-+ .name = "B",
- .used = 0,
- },
- {
- .group = group_c,
-+ .name = "C",
- .used = 0,
- },
- {
- .group = group_d,
-+ .name = "D",
- .used = 0,
- },
- {
- .group = group_e,
-+ .name = "E",
- .used = 0,
- },
- {
- .group = group_f,
-+ .name = "F",
- .used = 0,
- }
- };
-@@ -94,14 +123,32 @@
- /* Begin Non-multiplexed interfaces */
- {
- .ioif = if_eth,
-+ .name = "ethernet",
- .groups = 0,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0,
- .gpio_g_out = 0,
- .gpio_b = 0
- },
- {
- .ioif = if_serial_0,
-+ .name = "serial_0",
- .groups = 0,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0,
- .gpio_g_out = 0,
- .gpio_b = 0
-@@ -109,172 +156,385 @@
- /* End Non-multiplexed interfaces */
- {
- .ioif = if_serial_1,
-+ .name = "serial_1",
- .groups = group_e,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0x0f,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0x00
- },
- {
- .ioif = if_serial_2,
-+ .name = "serial_2",
- .groups = group_b,
-+
-+ .group_a = 0,
-+ .group_b = 0x0f,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x000000c0,
- .gpio_g_out = 0x000000c0,
- .gpio_b = 0x00
- },
- {
- .ioif = if_serial_3,
-+ .name = "serial_3",
- .groups = group_c,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0x0f,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0xc0000000,
- .gpio_g_out = 0xc0000000,
- .gpio_b = 0x00
- },
- {
- .ioif = if_sync_serial_1,
-- .groups = group_e | group_f, /* if_sync_serial_1 and if_sync_serial_3
-- can be used simultaneously */
-+ .name = "sync_serial_1",
-+ .groups = group_e | group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0x0f,
-+ .group_f = 0x10,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0x10
- },
- {
- .ioif = if_sync_serial_3,
-+ .name = "sync_serial_3",
- .groups = group_c | group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0x0f,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0x80,
-+
- .gpio_g_in = 0xc0000000,
- .gpio_g_out = 0xc0000000,
- .gpio_b = 0x80
- },
- {
- .ioif = if_shared_ram,
-+ .name = "shared_ram",
- .groups = group_a,
-+
-+ .group_a = 0x7f8ff,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x0000ff3e,
- .gpio_g_out = 0x0000ff38,
- .gpio_b = 0x00
- },
- {
- .ioif = if_shared_ram_w,
-+ .name = "shared_ram_w",
- .groups = group_a | group_d,
-+
-+ .group_a = 0x7f8ff,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0xff,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x00ffff3e,
- .gpio_g_out = 0x00ffff38,
- .gpio_b = 0x00
- },
- {
- .ioif = if_par_0,
-+ .name = "par_0",
- .groups = group_a,
-+
-+ .group_a = 0x7fbff,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x0000ff3e,
- .gpio_g_out = 0x0000ff3e,
- .gpio_b = 0x00
- },
- {
- .ioif = if_par_1,
-+ .name = "par_1",
- .groups = group_d,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0x7feff,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x3eff0000,
- .gpio_g_out = 0x3eff0000,
- .gpio_b = 0x00
- },
- {
- .ioif = if_par_w,
-+ .name = "par_w",
- .groups = group_a | group_d,
-+
-+ .group_a = 0x7fbff,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0xff,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x00ffff3e,
- .gpio_g_out = 0x00ffff3e,
- .gpio_b = 0x00
- },
- {
- .ioif = if_scsi8_0,
-- .groups = group_a | group_b | group_f, /* if_scsi8_0 and if_scsi8_1
-- can be used simultaneously */
-+ .name = "scsi8_0",
-+ .groups = group_a | group_b | group_f,
-+
-+ .group_a = 0x7ffff,
-+ .group_b = 0x0f,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0x10,
-+
- .gpio_g_in = 0x0000ffff,
- .gpio_g_out = 0x0000ffff,
- .gpio_b = 0x10
- },
- {
- .ioif = if_scsi8_1,
-- .groups = group_c | group_d | group_f, /* if_scsi8_0 and if_scsi8_1
-- can be used simultaneously */
-+ .name = "scsi8_1",
-+ .groups = group_c | group_d | group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0x0f,
-+ .group_d = 0x7ffff,
-+ .group_e = 0,
-+ .group_f = 0x80,
-+
- .gpio_g_in = 0xffff0000,
- .gpio_g_out = 0xffff0000,
- .gpio_b = 0x80
- },
- {
- .ioif = if_scsi_w,
-+ .name = "scsi_w",
- .groups = group_a | group_b | group_d | group_f,
-+
-+ .group_a = 0x7ffff,
-+ .group_b = 0x0f,
-+ .group_c = 0,
-+ .group_d = 0x601ff,
-+ .group_e = 0,
-+ .group_f = 0x90,
-+
- .gpio_g_in = 0x01ffffff,
- .gpio_g_out = 0x07ffffff,
- .gpio_b = 0x80
- },
- {
- .ioif = if_ata,
-+ .name = "ata",
- .groups = group_a | group_b | group_c | group_d,
-+
-+ .group_a = 0x7ffff,
-+ .group_b = 0x0f,
-+ .group_c = 0x0f,
-+ .group_d = 0x7cfff,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0xf9ffffff,
- .gpio_g_out = 0xffffffff,
- .gpio_b = 0x80
- },
- {
- .ioif = if_csp,
-- .groups = group_f, /* if_csp and if_i2c can be used simultaneously */
-+ .name = "csp",
-+ .groups = group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0xfc,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0xfc
- },
- {
- .ioif = if_i2c,
-- .groups = group_f, /* if_csp and if_i2c can be used simultaneously */
-+ .name = "i2c",
-+ .groups = group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0x03,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0x03
- },
- {
- .ioif = if_usb_1,
-+ .name = "usb_1",
- .groups = group_e | group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0x0f,
-+ .group_f = 0x2c,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0x2c
- },
- {
- .ioif = if_usb_2,
-+ .name = "usb_2",
- .groups = group_d,
-- .gpio_g_in = 0x0e000000,
-- .gpio_g_out = 0x3c000000,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0x33e00,
-+ .group_f = 0,
-+
-+ .gpio_g_in = 0x3e000000,
-+ .gpio_g_out = 0x0c000000,
- .gpio_b = 0x00
- },
- /* GPIO pins */
- {
- .ioif = if_gpio_grp_a,
-+ .name = "gpio_a",
- .groups = group_a,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x0000ff3f,
- .gpio_g_out = 0x0000ff3f,
- .gpio_b = 0x00
- },
- {
- .ioif = if_gpio_grp_b,
-+ .name = "gpio_b",
- .groups = group_b,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x000000c0,
- .gpio_g_out = 0x000000c0,
- .gpio_b = 0x00
- },
- {
- .ioif = if_gpio_grp_c,
-+ .name = "gpio_c",
- .groups = group_c,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0xc0000000,
- .gpio_g_out = 0xc0000000,
- .gpio_b = 0x00
- },
- {
- .ioif = if_gpio_grp_d,
-+ .name = "gpio_d",
- .groups = group_d,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x3fff0000,
- .gpio_g_out = 0x3fff0000,
- .gpio_b = 0x00
- },
- {
- .ioif = if_gpio_grp_e,
-+ .name = "gpio_e",
- .groups = group_e,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0x00
- },
- {
- .ioif = if_gpio_grp_f,
-+ .name = "gpio_f",
- .groups = group_f,
-+
-+ .group_a = 0,
-+ .group_b = 0,
-+ .group_c = 0,
-+ .group_d = 0,
-+ .group_e = 0,
-+ .group_f = 0,
-+
- .gpio_g_in = 0x00000000,
- .gpio_g_out = 0x00000000,
- .gpio_b = 0xff
-@@ -284,11 +544,13 @@
-
- static struct watcher *watchers = NULL;
-
-+// The pins that are free to use in the GPIO ports.
- static unsigned int gpio_in_pins = 0xffffffff;
- static unsigned int gpio_out_pins = 0xffffffff;
- static unsigned char gpio_pb_pins = 0xff;
- static unsigned char gpio_pa_pins = 0xff;
-
-+// Identifiers for the owners of the GPIO pins.
- static enum cris_io_interface gpio_pa_owners[8];
- static enum cris_io_interface gpio_pb_owners[8];
- static enum cris_io_interface gpio_pg_owners[32];
-@@ -318,7 +580,7 @@
- struct watcher *w = watchers;
-
- DBG(printk("io_interface_mux: notifying watchers\n"));
--
-+
- while (NULL != w) {
- w->notify((const unsigned int)gpio_in_pins,
- (const unsigned int)gpio_out_pins,
-@@ -354,37 +616,48 @@
-
- if (interfaces[ioif].used) {
- local_irq_restore(flags);
-- printk(KERN_CRIT "cris_io_interface: Cannot allocate interface for %s, in use by %s\n",
-+ printk(KERN_CRIT "cris_io_interface: Cannot allocate interface %s for %s, in use by %s\n",
-+ interfaces[ioif].name,
- device_id,
- interfaces[ioif].owner);
- return -EBUSY;
- }
-
-- /* Check that all required groups are free before allocating, */
-+ /* Check that all required pins in the used groups are free
-+ * before allocating. */
- group_set = interfaces[ioif].groups;
- while (NULL != (grp = get_group(group_set))) {
-- if (grp->used) {
-- if (grp->group == group_f) {
-- if ((if_sync_serial_1 == ioif) ||
-- (if_sync_serial_3 == ioif)) {
-- if ((grp->owner != if_sync_serial_1) &&
-- (grp->owner != if_sync_serial_3)) {
-- local_irq_restore(flags);
-- return -EBUSY;
-- }
-- } else if ((if_scsi8_0 == ioif) ||
-- (if_scsi8_1 == ioif)) {
-- if ((grp->owner != if_scsi8_0) &&
-- (grp->owner != if_scsi8_1)) {
-- local_irq_restore(flags);
-- return -EBUSY;
-- }
-- }
-- } else {
-- local_irq_restore(flags);
-- return -EBUSY;
-- }
-+ unsigned int if_group_use = 0;
-+
-+ switch(grp->group) {
-+ case group_a:
-+ if_group_use = interfaces[ioif].group_a;
-+ break;
-+ case group_b:
-+ if_group_use = interfaces[ioif].group_b;
-+ break;
-+ case group_c:
-+ if_group_use = interfaces[ioif].group_c;
-+ break;
-+ case group_d:
-+ if_group_use = interfaces[ioif].group_d;
-+ break;
-+ case group_e:
-+ if_group_use = interfaces[ioif].group_e;
-+ break;
-+ case group_f:
-+ if_group_use = interfaces[ioif].group_f;
-+ break;
-+ default:
-+ BUG_ON(1);
- }
-+
-+ if(if_group_use & grp->used) {
-+ local_irq_restore(flags);
-+ printk(KERN_INFO "cris_request_io_interface: group %s needed by %s not available\n", grp->name, interfaces[ioif].name);
-+ return -EBUSY;
-+ }
-+
- group_set = clear_group_from_set(group_set, grp);
- }
-
-@@ -392,22 +665,16 @@
- if (((interfaces[ioif].gpio_g_in & gpio_in_pins) != interfaces[ioif].gpio_g_in) ||
- ((interfaces[ioif].gpio_g_out & gpio_out_pins) != interfaces[ioif].gpio_g_out) ||
- ((interfaces[ioif].gpio_b & gpio_pb_pins) != interfaces[ioif].gpio_b)) {
-- printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %u\n",
-- ioif);
-+ local_irq_restore(flags);
-+ printk(KERN_CRIT "cris_request_io_interface: Could not get required pins for interface %s\n",
-+ interfaces[ioif].name);
- return -EBUSY;
- }
-
-- /* All needed I/O pins and pin groups are free, allocate. */
-- group_set = interfaces[ioif].groups;
-- while (NULL != (grp = get_group(group_set))) {
-- grp->used = 1;
-- grp->owner = ioif;
-- group_set = clear_group_from_set(group_set, grp);
-- }
--
-+ /* Check which registers need to be reconfigured. */
- gens = genconfig_shadow;
- gens_ii = gen_config_ii_shadow;
--
-+
- set_gen_config = 1;
- switch (ioif)
- {
-@@ -494,9 +761,43 @@
- set_gen_config = 0;
- break;
- default:
-- panic("cris_request_io_interface: Bad interface %u submitted for %s\n",
-- ioif,
-- device_id);
-+ local_irq_restore(flags);
-+ printk(KERN_INFO "cris_request_io_interface: Bad interface %u submitted for %s\n",
-+ ioif,
-+ device_id);
-+ return -EBUSY;
-+ }
-+
-+ /* All needed I/O pins and pin groups are free, allocate. */
-+ group_set = interfaces[ioif].groups;
-+ while (NULL != (grp = get_group(group_set))) {
-+ unsigned int if_group_use = 0;
-+
-+ switch(grp->group) {
-+ case group_a:
-+ if_group_use = interfaces[ioif].group_a;
-+ break;
-+ case group_b:
-+ if_group_use = interfaces[ioif].group_b;
-+ break;
-+ case group_c:
-+ if_group_use = interfaces[ioif].group_c;
-+ break;
-+ case group_d:
-+ if_group_use = interfaces[ioif].group_d;
-+ break;
-+ case group_e:
-+ if_group_use = interfaces[ioif].group_e;
-+ break;
-+ case group_f:
-+ if_group_use = interfaces[ioif].group_f;
-+ break;
-+ default:
-+ BUG_ON(1);
-+ }
-+ grp->used |= if_group_use;
-+
-+ group_set = clear_group_from_set(group_set, grp);
- }
-
- interfaces[ioif].used = 1;
-@@ -528,7 +829,7 @@
-
- DBG(printk("GPIO pins: available after: g_in=0x%08x g_out=0x%08x pb=0x%02x\n",
- gpio_in_pins, gpio_out_pins, gpio_pb_pins));
--
-+
- local_irq_restore(flags);
-
- notify_watchers();
-@@ -559,43 +860,36 @@
- }
- group_set = interfaces[ioif].groups;
- while (NULL != (grp = get_group(group_set))) {
-- if (grp->group == group_f) {
-- switch (ioif)
-- {
-- case if_sync_serial_1:
-- if ((grp->owner == if_sync_serial_1) &&
-- interfaces[if_sync_serial_3].used) {
-- grp->owner = if_sync_serial_3;
-- } else
-- grp->used = 0;
-- break;
-- case if_sync_serial_3:
-- if ((grp->owner == if_sync_serial_3) &&
-- interfaces[if_sync_serial_1].used) {
-- grp->owner = if_sync_serial_1;
-- } else
-- grp->used = 0;
-- break;
-- case if_scsi8_0:
-- if ((grp->owner == if_scsi8_0) &&
-- interfaces[if_scsi8_1].used) {
-- grp->owner = if_scsi8_1;
-- } else
-- grp->used = 0;
-- break;
-- case if_scsi8_1:
-- if ((grp->owner == if_scsi8_1) &&
-- interfaces[if_scsi8_0].used) {
-- grp->owner = if_scsi8_0;
-- } else
-- grp->used = 0;
-- break;
-- default:
-- grp->used = 0;
-- }
-- } else {
-- grp->used = 0;
-+ unsigned int if_group_use = 0;
-+
-+ switch(grp->group) {
-+ case group_a:
-+ if_group_use = interfaces[ioif].group_a;
-+ break;
-+ case group_b:
-+ if_group_use = interfaces[ioif].group_b;
-+ break;
-+ case group_c:
-+ if_group_use = interfaces[ioif].group_c;
-+ break;
-+ case group_d:
-+ if_group_use = interfaces[ioif].group_d;
-+ break;
-+ case group_e:
-+ if_group_use = interfaces[ioif].group_e;
-+ break;
-+ case group_f:
-+ if_group_use = interfaces[ioif].group_f;
-+ break;
-+ default:
-+ BUG_ON(1);
- }
-+
-+ if ((grp->used & if_group_use) != if_group_use) {
-+ BUG_ON(1);
-+ }
-+ grp->used = grp->used & ~if_group_use;
-+
- group_set = clear_group_from_set(group_set, grp);
- }
- interfaces[ioif].used = 0;
-@@ -784,7 +1078,7 @@
-
- for (i = start_bit; i <= stop_bit; i++) {
- owners[i] = if_unclaimed;
-- }
-+ }
- local_irq_restore(flags);
- notify_watchers();
-
-@@ -821,7 +1115,7 @@
- }
-
- void cris_io_interface_delete_watcher(void (*notify)(const unsigned int gpio_in_available,
-- const unsigned int gpio_out_available,
-+ const unsigned int gpio_out_available,
- const unsigned char pa_available,
- const unsigned char pb_available))
- {
-@@ -870,7 +1164,7 @@
-
- module_init(cris_io_interface_init);
-
--
-+
- EXPORT_SYMBOL(cris_request_io_interface);
- EXPORT_SYMBOL(cris_free_io_interface);
- EXPORT_SYMBOL(cris_io_interface_allocate_pins);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/irq.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/irq.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/irq.c 2006-10-30 16:17:03.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: irq.c,v 1.4 2005/01/04 12:22:28 starvik Exp $
-+/* $Id: irq.c,v 1.9 2006/10/30 15:17:03 pkj Exp $
- *
- * linux/arch/cris/kernel/irq.c
- *
-@@ -12,7 +12,9 @@
- */
-
- #include <asm/irq.h>
-+#include <asm/current.h>
- #include <linux/irq.h>
-+#include <linux/interrupt.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
-
-@@ -75,8 +77,8 @@
- BUILD_IRQ(13, 0x2000)
- void mmu_bus_fault(void); /* IRQ 14 is the bus fault interrupt */
- void multiple_interrupt(void); /* IRQ 15 is the multiple IRQ interrupt */
--BUILD_IRQ(16, 0x10000)
--BUILD_IRQ(17, 0x20000)
-+BUILD_IRQ(16, 0x10000 | 0x20000) /* ethernet tx interrupt needs to block rx */
-+BUILD_IRQ(17, 0x20000 | 0x10000) /* ...and vice versa */
- BUILD_IRQ(18, 0x40000)
- BUILD_IRQ(19, 0x80000)
- BUILD_IRQ(20, 0x100000)
-@@ -147,6 +149,55 @@
- void do_sigtrap(void); /* from entry.S */
- void gdb_handle_breakpoint(void); /* from entry.S */
-
-+extern void do_IRQ(int irq, struct pt_regs * regs);
-+
-+/* Handle multiple IRQs */
-+void do_multiple_IRQ(struct pt_regs* regs)
-+{
-+ int bit;
-+ unsigned masked;
-+ unsigned mask;
-+ unsigned ethmask = 0;
-+
-+ /* Get interrupts to mask and handle */
-+ mask = masked = *R_VECT_MASK_RD;
-+
-+ /* Never mask timer IRQ */
-+ mask &= ~(IO_MASK(R_VECT_MASK_RD, timer0));
-+
-+ /*
-+ * If either ethernet interrupt (rx or tx) is active then block
-+ * the other one too. Unblock afterwards also.
-+ */
-+ if (mask &
-+ (IO_STATE(R_VECT_MASK_RD, dma0, active) |
-+ IO_STATE(R_VECT_MASK_RD, dma1, active))) {
-+ ethmask = (IO_MASK(R_VECT_MASK_RD, dma0) |
-+ IO_MASK(R_VECT_MASK_RD, dma1));
-+ }
-+
-+ /* Block them */
-+ *R_VECT_MASK_CLR = (mask | ethmask);
-+
-+ /* An extra irq_enter here to prevent softIRQs to run after
-+ * each do_IRQ. This will decrease the interrupt latency.
-+ */
-+ irq_enter();
-+
-+ /* Handle all IRQs */
-+ for (bit = 2; bit < 32; bit++) {
-+ if (masked & (1 << bit)) {
-+ do_IRQ(bit, regs);
-+ }
-+ }
-+
-+ /* This irq_exit() will trigger the soft IRQs. */
-+ irq_exit();
-+
-+ /* Unblock the IRQs again */
-+ *R_VECT_MASK_SET = (masked | ethmask);
-+}
-+
- /* init_IRQ() is called by start_kernel and is responsible for fixing IRQ masks and
- setting the irq vector table.
- */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/kgdb.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/kgdb.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/kgdb.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/kgdb.c 2006-03-22 10:56:55.000000000 +0100
-@@ -18,6 +18,10 @@
- *! Jul 21 1999 Bjorn Wesen eLinux port
- *!
- *! $Log: kgdb.c,v $
-+*! Revision 1.7 2006/03/22 09:56:55 starvik
-+*! Merge of Linux 2.6.16
-+*!
-+*!
- *! Revision 1.6 2005/01/14 10:12:17 starvik
- *! KGDB on separate port.
- *! Console fixes from 2.4.
-@@ -75,7 +79,7 @@
- *!
- *!---------------------------------------------------------------------------
- *!
--*! $Id: kgdb.c,v 1.6 2005/01/14 10:12:17 starvik Exp $
-+*! $Id: kgdb.c,v 1.7 2006/03/22 09:56:55 starvik Exp $
- *!
- *! (C) Copyright 1999, Axis Communications AB, LUND, SWEDEN
- *!
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/process.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/process.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/process.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/process.c 2006-10-13 14:43:11.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: process.c,v 1.12 2004/12/27 11:18:32 starvik Exp $
-+/* $Id: process.c,v 1.14 2006/10/13 12:43:11 starvik Exp $
- *
- * linux/arch/cris/kernel/process.c
- *
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/ptrace.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/ptrace.c 2006-10-30 16:17:57.000000000 +0100
-@@ -66,6 +66,7 @@
- ptrace_disable(struct task_struct *child)
- {
- /* Todo - pending singlesteps? */
-+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- }
-
- /*
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/setup.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/setup.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/setup.c 2006-10-13 14:43:11.000000000 +0200
-@@ -1,4 +1,4 @@
--/*
-+/*
- *
- * linux/arch/cris/arch-v10/kernel/setup.c
- *
-@@ -13,6 +13,7 @@
- #include <linux/seq_file.h>
- #include <linux/proc_fs.h>
- #include <linux/delay.h>
-+#include <linux/param.h>
-
- #ifdef CONFIG_PROC_FS
- #define HAS_FPU 0x0001
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/signal.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/signal.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/signal.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/signal.c 2006-03-22 10:56:55.000000000 +0100
-@@ -41,7 +41,7 @@
- */
- #define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->irp -= 2;
-
--int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
-+void do_signal(int canrestart, struct pt_regs *regs);
-
- /*
- * Atomically swap in the new signal mask, and wait for a signal. Define
-@@ -52,68 +52,16 @@
- sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
- long srp, struct pt_regs *regs)
- {
-- sigset_t saveset;
--
- mask &= _BLOCKABLE;
- spin_lock_irq(&current->sighand->siglock);
-- saveset = current->blocked;
-- siginitset(&current->blocked, mask);
-- recalc_sigpending();
-- spin_unlock_irq(&current->sighand->siglock);
--
-- regs->r10 = -EINTR;
-- while (1) {
-- current->state = TASK_INTERRUPTIBLE;
-- schedule();
-- if (do_signal(0, &saveset, regs))
-- /* We will get here twice: once to call the signal
-- handler, then again to return from the
-- sigsuspend system call. When calling the
-- signal handler, R10 holds the signal number as
-- set through do_signal. The sigsuspend call
-- will return with the restored value set above;
-- always -EINTR. */
-- return regs->r10;
-- }
--}
--
--/* Define dummy arguments to be able to reach the regs argument. (Note that
-- * this arrangement relies on size_t occupying one register.)
-- */
--int
--sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
-- long mof, long srp, struct pt_regs *regs)
--{
-- sigset_t saveset, newset;
--
-- /* XXX: Don't preclude handling different sized sigset_t's. */
-- if (sigsetsize != sizeof(sigset_t))
-- return -EINVAL;
--
-- if (copy_from_user(&newset, unewset, sizeof(newset)))
-- return -EFAULT;
-- sigdelsetmask(&newset, ~_BLOCKABLE);
--
-- spin_lock_irq(&current->sighand->siglock);
-- saveset = current->blocked;
-- current->blocked = newset;
-+ current->saved_sigmask = current->blocked;
-+ siginitset(&current->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
--
-- regs->r10 = -EINTR;
-- while (1) {
-- current->state = TASK_INTERRUPTIBLE;
-- schedule();
-- if (do_signal(0, &saveset, regs))
-- /* We will get here twice: once to call the signal
-- handler, then again to return from the
-- sigsuspend system call. When calling the
-- signal handler, R10 holds the signal number as
-- set through do_signal. The sigsuspend call
-- will return with the restored value set above;
-- always -EINTR. */
-- return regs->r10;
-- }
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule();
-+ set_thread_flag(TIF_RESTORE_SIGMASK);
-+ return -ERESTARTNOHAND;
- }
-
- int
-@@ -353,8 +301,8 @@
- * user-mode trampoline.
- */
-
--static void setup_frame(int sig, struct k_sigaction *ka,
-- sigset_t *set, struct pt_regs * regs)
-+static int setup_frame(int sig, struct k_sigaction *ka,
-+ sigset_t *set, struct pt_regs * regs)
- {
- struct sigframe __user *frame;
- unsigned long return_ip;
-@@ -402,14 +350,15 @@
-
- wrusp((unsigned long)frame);
-
-- return;
-+ return 0;
-
- give_sigsegv:
- force_sigsegv(sig, current);
-+ return -EFAULT;
- }
-
--static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-- sigset_t *set, struct pt_regs * regs)
-+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-+ sigset_t *set, struct pt_regs * regs)
- {
- struct rt_sigframe __user *frame;
- unsigned long return_ip;
-@@ -466,21 +415,24 @@
-
- wrusp((unsigned long)frame);
-
-- return;
-+ return 0;
-
- give_sigsegv:
- force_sigsegv(sig, current);
-+ return -EFAULT;
- }
-
- /*
- * OK, we're invoking a handler
- */
-
--static inline void
-+static inline int
- handle_signal(int canrestart, unsigned long sig,
- siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs * regs)
- {
-+ int ret;
-+
- /* Are we from a system call? */
- if (canrestart) {
- /* If so, check system call restarting.. */
-@@ -510,19 +462,20 @@
-
- /* Set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
-- setup_rt_frame(sig, ka, info, oldset, regs);
-+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
- else
-- setup_frame(sig, ka, oldset, regs);
-+ ret = setup_frame(sig, ka, oldset, regs);
-
-- if (ka->sa.sa_flags & SA_ONESHOT)
-- ka->sa.sa_handler = SIG_DFL;
-+ if (ret == 0) {
-+ spin_lock_irq(&current->sighand->siglock);
-+ sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-+ if (!(ka->sa.sa_flags & SA_NODEFER))
-+ sigaddset(&current->blocked,sig);
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+ }
-
-- spin_lock_irq(&current->sighand->siglock);
-- sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-- if (!(ka->sa.sa_flags & SA_NODEFER))
-- sigaddset(&current->blocked,sig);
-- recalc_sigpending();
-- spin_unlock_irq(&current->sighand->siglock);
-+ return ret;
- }
-
- /*
-@@ -537,12 +490,13 @@
- * mode below.
- */
-
--int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
-+void do_signal(int canrestart, struct pt_regs *regs)
- {
- siginfo_t info;
- int signr;
- struct k_sigaction ka;
--
-+ sigset_t *oldset;
-+
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
-@@ -550,16 +504,26 @@
- * if so.
- */
- if (!user_mode(regs))
-- return 1;
-+ return;
-
-- if (!oldset)
-+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
-+ oldset = &current->saved_sigmask;
-+ else
- oldset = &current->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Whee! Actually deliver the signal. */
-- handle_signal(canrestart, signr, &info, &ka, oldset, regs);
-- return 1;
-+ if (handle_signal(canrestart, signr, &info, &ka, oldset, regs)) {
-+ /* a signal was successfully delivered; the saved
-+ * sigmask will have been stored in the signal frame,
-+ * and will be restored by sigreturn, so we can simply
-+ * clear the TIF_RESTORE_SIGMASK flag */
-+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
-+ clear_thread_flag(TIF_RESTORE_SIGMASK);
-+ }
-+
-+ return;
- }
-
- /* Did we come from a system call? */
-@@ -575,5 +539,11 @@
- regs->irp -= 2;
- }
- }
-- return 0;
-+
-+ /* if there's no signal to deliver, we just put the saved sigmask
-+ * back */
-+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-+ clear_thread_flag(TIF_RESTORE_SIGMASK);
-+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-+ }
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/time.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/time.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/time.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/time.c 2007-01-09 10:29:18.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: time.c,v 1.5 2004/09/29 06:12:46 starvik Exp $
-+/* $Id: time.c,v 1.10 2007/01/09 09:29:18 starvik Exp $
- *
- * linux/arch/cris/arch-v10/kernel/time.c
- *
-@@ -20,6 +20,7 @@
- #include <asm/io.h>
- #include <asm/delay.h>
- #include <asm/rtc.h>
-+#include <asm/irq_regs.h>
-
- /* define this if you need to use print_timestamp */
- /* it will make jiffies at 96 hz instead of 100 hz though */
-@@ -202,8 +203,9 @@
- extern void cris_do_profile(struct pt_regs *regs);
-
- static inline irqreturn_t
--timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+timer_interrupt(int irq, void *dev_id)
- {
-+ struct pt_regs* regs = get_irq_regs();
- /* acknowledge the timer irq */
-
- #ifdef USE_CASCADE_TIMERS
-@@ -222,9 +224,11 @@
- #endif
-
- /* reset watchdog otherwise it resets us! */
--
- reset_watchdog();
-
-+ /* Update statistics. */
-+ update_process_times(user_mode(regs));
-+
- /* call the real timer interrupt handler */
-
- do_timer(1);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/kernel/traps.c linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/traps.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/kernel/traps.c 2006-12-11 14:04:24.000000000 +0100
-@@ -1,13 +1,10 @@
--/* $Id: traps.c,v 1.4 2005/04/24 18:47:55 starvik Exp $
-+/*
-+ * Helper functions for trap handlers
- *
-- * linux/arch/cris/arch-v10/traps.c
-+ * Copyright (C) 2000-2006, Axis Communications AB.
- *
-- * Heler functions for trap handlers
-- *
-- * Copyright (C) 2000-2002 Axis Communications AB
-- *
-- * Authors: Bjorn Wesen
-- * Hans-Peter Nilsson
-+ * Authors: Bjorn Wesen
-+ * Hans-Peter Nilsson
- *
- */
-
-@@ -15,124 +12,118 @@
- #include <asm/uaccess.h>
- #include <asm/arch/sv_addr_ag.h>
-
--extern int raw_printk(const char *fmt, ...);
--
--void
--show_registers(struct pt_regs * regs)
-+void
-+show_registers(struct pt_regs *regs)
- {
-- /* We either use rdusp() - the USP register, which might not
-- correspond to the current process for all cases we're called,
-- or we use the current->thread.usp, which is not up to date for
-- the current process. Experience shows we want the USP
-- register. */
-+ /*
-+ * It's possible to use either the USP register or current->thread.usp.
-+ * USP might not correspond to the current process for all cases this
-+ * function is called, and current->thread.usp isn't up to date for the
-+ * current process. Experience shows that using USP is the way to go.
-+ */
- unsigned long usp = rdusp();
-
-- raw_printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
-- regs->irp, regs->srp, regs->dccr, usp, regs->mof );
-- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
-+ printk("IRP: %08lx SRP: %08lx DCCR: %08lx USP: %08lx MOF: %08lx\n",
-+ regs->irp, regs->srp, regs->dccr, usp, regs->mof);
-+
-+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
- regs->r0, regs->r1, regs->r2, regs->r3);
-- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
-+
-+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
- regs->r4, regs->r5, regs->r6, regs->r7);
-- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
-+
-+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
- regs->r8, regs->r9, regs->r10, regs->r11);
-- raw_printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n",
-- regs->r12, regs->r13, regs->orig_r10, regs);
-- raw_printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
-- raw_printk("Process %s (pid: %d, stackpage=%08lx)\n",
-+
-+ printk("r12: %08lx r13: %08lx oR10: %08lx sp: %08lx\n",
-+ regs->r12, regs->r13, regs->orig_r10, (long unsigned)regs);
-+
-+ printk("R_MMU_CAUSE: %08lx\n", (unsigned long)*R_MMU_CAUSE);
-+
-+ printk("Process %s (pid: %d, stackpage=%08lx)\n",
- current->comm, current->pid, (unsigned long)current);
-
- /*
-- * When in-kernel, we also print out the stack and code at the
-- * time of the fault..
-- */
-- if (! user_mode(regs)) {
-- int i;
-+ * When in-kernel, we also print out the stack and code at the
-+ * time of the fault..
-+ */
-+ if (!user_mode(regs)) {
-+ int i;
-
-- show_stack(NULL, (unsigned long*)usp);
-+ show_stack(NULL, (unsigned long *)usp);
-
-- /* Dump kernel stack if the previous dump wasn't one. */
-+ /*
-+ * If the previous stack-dump wasn't a kernel one, dump the
-+ * kernel stack now.
-+ */
- if (usp != 0)
-- show_stack (NULL, NULL);
-+ show_stack(NULL, NULL);
-
-- raw_printk("\nCode: ");
-- if(regs->irp < PAGE_OFFSET)
-- goto bad;
--
-- /* Often enough the value at regs->irp does not point to
-- the interesting instruction, which is most often the
-- _previous_ instruction. So we dump at an offset large
-- enough that instruction decoding should be in sync at
-- the interesting point, but small enough to fit on a row
-- (sort of). We point out the regs->irp location in a
-- ksymoops-friendly way by wrapping the byte for that
-- address in parentheses. */
-- for(i = -12; i < 12; i++)
-- {
-- unsigned char c;
-- if(__get_user(c, &((unsigned char*)regs->irp)[i])) {
--bad:
-- raw_printk(" Bad IP value.");
-- break;
-- }
-+ printk("\nCode: ");
-+
-+ if (regs->irp < PAGE_OFFSET)
-+ goto bad_value;
-+
-+ /*
-+ * Quite often the value at regs->irp doesn't point to the
-+ * interesting instruction, which often is the previous
-+ * instruction. So dump at an offset large enough that the
-+ * instruction decoding should be in sync at the interesting
-+ * point, but small enough to fit on a row. The regs->irp
-+ * location is pointed out in a ksymoops-friendly way by
-+ * wrapping the byte for that address in parenthesises.
-+ */
-+ for (i = -12; i < 12; i++) {
-+ unsigned char c;
-+
-+ if (__get_user(c, &((unsigned char *)regs->irp)[i])) {
-+bad_value:
-+ printk(" Bad IP value.");
-+ break;
-+ }
-
- if (i == 0)
-- raw_printk("(%02x) ", c);
-+ printk("(%02x) ", c);
- else
-- raw_printk("%02x ", c);
-- }
-- raw_printk("\n");
-- }
-+ printk("%02x ", c);
-+ }
-+ printk("\n");
-+ }
- }
-
--/* Called from entry.S when the watchdog has bitten
-- * We print out something resembling an oops dump, and if
-- * we have the nice doggy development flag set, we halt here
-- * instead of rebooting.
-- */
--
--extern void reset_watchdog(void);
--extern void stop_watchdog(void);
--
--
- void
--watchdog_bite_hook(struct pt_regs *regs)
-+arch_enable_nmi(void)
- {
--#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-- local_irq_disable();
-- stop_watchdog();
-- show_registers(regs);
-- while(1) /* nothing */;
--#else
-- show_registers(regs);
--#endif
-+ asm volatile ("setf m");
- }
-
--/* This is normally the 'Oops' routine */
--void
--die_if_kernel(const char * str, struct pt_regs * regs, long err)
-+extern void (*nmi_handler)(struct pt_regs*);
-+void handle_nmi(struct pt_regs* regs)
- {
-- if(user_mode(regs))
-- return;
--
--#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-- /* This printout might take too long and trigger the
-- * watchdog normally. If we're in the nice doggy
-- * development mode, stop the watchdog during printout.
-- */
-- stop_watchdog();
--#endif
--
-- raw_printk("%s: %04lx\n", str, err & 0xffff);
--
-- show_registers(regs);
-+ if (nmi_handler)
-+ nmi_handler(regs);
-
--#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-- reset_watchdog();
--#endif
-- do_exit(SIGSEGV);
-+ /* Wait until nmi is no longer active. (We enable NMI immediately after
-+ returning from this function, and we don't want it happening while
-+ exiting from the NMI interrupt handler.) */
-+ while(*R_IRQ_MASK0_RD & IO_STATE(R_IRQ_MASK0_RD, nmi_pin, active));
- }
-
--void arch_enable_nmi(void)
-+#ifdef CONFIG_DEBUG_BUGVERBOSE
-+void
-+handle_BUG(struct pt_regs *regs)
- {
-- asm volatile("setf m");
-+ struct bug_frame f;
-+ unsigned char c;
-+ unsigned long irp = regs->irp;
-+
-+ if (__copy_from_user(&f, (const void __user *)(irp - 8), sizeof f))
-+ return;
-+ if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC)
-+ return;
-+ if (__get_user(c, f.filename))
-+ f.filename = "<bad filename>";
-+
-+ printk("kernel BUG at %s:%d!\n", f.filename, f.line);
- }
-+#endif
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksum.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksum.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksum.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksum.S 2005-08-16 12:38:52.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: checksum.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+/* $Id: checksum.S,v 1.2 2005/08/16 10:38:52 edgar Exp $
- * A fast checksum routine using movem
- * Copyright (c) 1998-2001 Axis Communications AB
- *
-@@ -61,8 +61,6 @@
-
- ax
- addq 0,$r12
-- ax ; do it again, since we might have generated a carry
-- addq 0,$r12
-
- subq 10*4,$r11
- bge _mloop
-@@ -88,10 +86,6 @@
- lsrq 16,$r13 ; r13 = checksum >> 16
- and.d $r9,$r12 ; checksum = checksum & 0xffff
- add.d $r13,$r12 ; checksum += r13
-- move.d $r12,$r13 ; do the same again, maybe we got a carry last add
-- lsrq 16,$r13
-- and.d $r9,$r12
-- add.d $r13,$r12
-
- _no_fold:
- cmpq 2,$r11
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksumcopy.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksumcopy.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/lib/checksumcopy.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/checksumcopy.S 2005-08-16 12:38:52.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: checksumcopy.S,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-+/* $Id: checksumcopy.S,v 1.2 2005/08/16 10:38:52 edgar Exp $
- * A fast checksum+copy routine using movem
- * Copyright (c) 1998, 2001 Axis Communications AB
- *
-@@ -67,8 +67,6 @@
-
- ax
- addq 0,$r13
-- ax ; do it again, since we might have generated a carry
-- addq 0,$r13
-
- subq 10*4,$r12
- bge _mloop
-@@ -91,10 +89,6 @@
- lsrq 16,$r9 ; r0 = checksum >> 16
- and.d 0xffff,$r13 ; checksum = checksum & 0xffff
- add.d $r9,$r13 ; checksum += r0
-- move.d $r13,$r9 ; do the same again, maybe we got a carry last add
-- lsrq 16,$r9
-- and.d 0xffff,$r13
-- add.d $r9,$r13
-
- _no_fold:
- cmpq 2,$r12
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/lib/dram_init.S linux-2.6.19.2.dev/arch/cris/arch-v10/lib/dram_init.S
---- linux-2.6.19.2.old/arch/cris/arch-v10/lib/dram_init.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/lib/dram_init.S 2006-10-13 14:43:11.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: dram_init.S,v 1.4 2003/09/22 09:21:59 starvik Exp $
-+/* $Id: dram_init.S,v 1.5 2006/10/13 12:43:11 starvik Exp $
- *
- * DRAM/SDRAM initialization - alter with care
- * This file is intended to be included from other assembler files
-@@ -11,6 +11,9 @@
- * Authors: Mikael Starvik (starvik@axis.com)
- *
- * $Log: dram_init.S,v $
-+ * Revision 1.5 2006/10/13 12:43:11 starvik
-+ * Merge of 2.6.18
-+ *
- * Revision 1.4 2003/09/22 09:21:59 starvik
- * Decompresser is linked to 0x407xxxxx and sdram commands are at 0x000xxxxx
- * so we need to mask off 12 bits.
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/mm/fault.c linux-2.6.19.2.dev/arch/cris/arch-v10/mm/fault.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/mm/fault.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/mm/fault.c 2006-12-11 12:32:10.000000000 +0100
-@@ -73,7 +73,7 @@
- /* leave it to the MM system fault handler */
- if (miss)
- do_page_fault(address, regs, 0, writeac);
-- else
-+ else
- do_page_fault(address, regs, 1, we);
-
- /* Reload TLB with new entry to avoid an extra miss exception.
-@@ -84,12 +84,13 @@
- local_irq_disable();
- pmd = (pmd_t *)(pgd + pgd_index(address));
- if (pmd_none(*pmd))
-- return;
-+ goto exit;
- pte = *pte_offset_kernel(pmd, address);
- if (!pte_present(pte))
-- return;
-+ goto exit;
- *R_TLB_SELECT = select;
- *R_TLB_HI = cause;
- *R_TLB_LO = pte_val(pte);
-+exit:
- local_irq_restore(flags);
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v10/mm/tlb.c linux-2.6.19.2.dev/arch/cris/arch-v10/mm/tlb.c
---- linux-2.6.19.2.old/arch/cris/arch-v10/mm/tlb.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v10/mm/tlb.c 2006-08-07 12:08:35.000000000 +0200
-@@ -179,23 +179,26 @@
- switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
- {
-- /* make sure we have a context */
-+ if (prev != next) {
-+ /* make sure we have a context */
-+ get_mmu_context(next);
-+
-+ /* remember the pgd for the fault handlers
-+ * this is similar to the pgd register in some other CPU's.
-+ * we need our own copy of it because current and active_mm
-+ * might be invalid at points where we still need to derefer
-+ * the pgd.
-+ */
-
-- get_mmu_context(next);
-+ per_cpu(current_pgd, smp_processor_id()) = next->pgd;
-
-- /* remember the pgd for the fault handlers
-- * this is similar to the pgd register in some other CPU's.
-- * we need our own copy of it because current and active_mm
-- * might be invalid at points where we still need to derefer
-- * the pgd.
-- */
--
-- per_cpu(current_pgd, smp_processor_id()) = next->pgd;
--
-- /* switch context in the MMU */
-+ /* switch context in the MMU */
-
-- D(printk("switching mmu_context to %d (%p)\n", next->context, next));
-+ D(printk("switching mmu_context to %d (%p)\n",
-+ next->context, next));
-
-- *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT, page_id, next->context.page_id);
-+ *R_MMU_CONTEXT = IO_FIELD(R_MMU_CONTEXT,
-+ page_id, next->context.page_id);
-+ }
- }
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v32/Kconfig
---- linux-2.6.19.2.old/arch/cris/arch-v32/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/Kconfig 2007-01-09 10:29:18.000000000 +0100
-@@ -1,23 +1,66 @@
-+source drivers/cpufreq/Kconfig
-+
- config ETRAX_DRAM_VIRTUAL_BASE
- hex
- depends on ETRAX_ARCH_V32
- default "c0000000"
-
--config ETRAX_LED1G
-- string "First green LED bit"
-+choice
-+ prompt "Nbr of Ethernet LED groups"
- depends on ETRAX_ARCH_V32
-+ default ETRAX_NBR_LED_GRP_ONE
-+ help
-+ Select how many Ethernet LED groups that can be used. Usually one per Ethernet
-+ interface is a good choice.
-+
-+config ETRAX_NBR_LED_GRP_ZERO
-+ bool "Use zero LED groups"
-+ help
-+ Select this if you do not want any Ethernet LEDs.
-+
-+config ETRAX_NBR_LED_GRP_ONE
-+ bool "Use one LED group"
-+ help
-+ Select this if you want one Ethernet LED group. This LED group can be used for
-+ one or more Ethernet interfaces. However, it is recomended that each Ethernet
-+ interface use a dedicated LED group.
-+
-+config ETRAX_NBR_LED_GRP_TWO
-+ bool "Use two LED groups"
-+ help
-+ Select this if you want two Ethernet LED groups. This is the best choice if you
-+ have more than one Ethernet interface and would like to have separate LEDs for
-+ the interfaces.
-+
-+endchoice
-+
-+config ETRAX_LED_G_NET0
-+ string "Ethernet LED group 0 green LED bit"
-+ depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
- default "PA3"
- help
-- Bit to use for the first green LED (network LED).
-- Most Axis products use bit A3 here.
-+ Bit to use for the green LED in Ethernet LED group 0.
-
--config ETRAX_LED1R
-- string "First red LED bit"
-- depends on ETRAX_ARCH_V32
-+config ETRAX_LED_R_NET0
-+ string "Ethernet LED group 0 red LED bit"
-+ depends on ETRAX_ARCH_V32 && (ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO)
- default "PA4"
- help
-- Bit to use for the first red LED (network LED).
-- Most Axis products use bit A4 here.
-+ Bit to use for the red LED in Ethernet LED group 0.
-+
-+config ETRAX_LED_G_NET1
-+ string "Ethernet group 1 green LED bit"
-+ depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
-+ default ""
-+ help
-+ Bit to use for the green LED in Ethernet LED group 1.
-+
-+config ETRAX_LED_R_NET1
-+ string "Ethernet group 1 red LED bit"
-+ depends on ETRAX_ARCH_V32 && ETRAX_NBR_LED_GRP_TWO
-+ default ""
-+ help
-+ Bit to use for the red LED in Ethernet LED group 1.
-
- config ETRAX_LED2G
- string "Second green LED bit"
-@@ -294,3 +337,22 @@
- help
- Configures the initial data for the general port E bits. Most
- products should use 00000 here.
-+
-+config ETRAX_DEF_GIO_PV_OE
-+ hex "GIO_PV_OE"
-+ depends on ETRAX_VIRTUAL_GPIO
-+ default "0000"
-+ help
-+ Configures the direction of virtual general port V bits. 1 is out,
-+ 0 is in. This is often totally different depending on the product
-+ used. These bits are used for all kinds of stuff. If you don't know
-+ what to use, it is always safe to put all as inputs, although
-+ floating inputs isn't good.
-+
-+config ETRAX_DEF_GIO_PV_OUT
-+ hex "GIO_PV_OUT"
-+ depends on ETRAX_VIRTUAL_GPIO
-+ default "0000"
-+ help
-+ Configures the initial data for the virtual general port V bits.
-+ Most products should use 0000 here.
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/Makefile 2006-11-29 17:05:41.000000000 +0100
-@@ -1,14 +1,21 @@
- #
- # arch/cris/arch-v32/boot/Makefile
- #
--target = $(target_boot_dir)
--src = $(src_boot_dir)
-
--zImage: compressed/vmlinuz
-+OBJCOPY = objcopy-cris
-+OBJCOPYFLAGS = -O binary -R .note -R .comment
-
--compressed/vmlinuz: $(objtree)/vmlinux
-- @$(MAKE) -f $(src)/compressed/Makefile $(objtree)/vmlinuz
-+subdir- := compressed rescue
-+targets := Image
-
--clean:
-- rm -f zImage tools/build compressed/vmlinux.out
-- @$(MAKE) -f $(src)/compressed/Makefile clean
-+$(obj)/Image: vmlinux FORCE
-+ $(call if_changed,objcopy)
-+ @echo ' Kernel: $@ is ready'
-+
-+$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-+ $(Q)$(MAKE) $(build)=$(obj)/compressed $@
-+ $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-+
-+$(obj)/zImage: $(obj)/compressed/vmlinux
-+ @cp $< $@
-+ @echo ' Kernel: $@ is ready'
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/Makefile 2006-11-29 17:05:42.000000000 +0100
-@@ -1,41 +1,29 @@
- #
--# lx25/arch/cris/arch-v32/boot/compressed/Makefile
-+# arch/cris/arch-v32/boot/compressed/Makefile
- #
--# create a compressed vmlinux image from the original vmlinux files and romfs
--#
--
--target = $(target_compressed_dir)
--src = $(src_compressed_dir)
-
- CC = gcc-cris -mlinux -march=v32 -I $(TOPDIR)/include
- CFLAGS = -O2
- LD = gcc-cris -mlinux -march=v32 -nostdlib
-+LDFLAGS = -T $(obj)/decompress.ld
-+obj-y = head.o misc.o
-+OBJECTS = $(obj)/head.o $(obj)/misc.o
- OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
--OBJECTS = $(target)/head.o $(target)/misc.o
--
--# files to compress
--SYSTEM = $(objtree)/vmlinux.bin
--
--all: vmlinuz
--
--$(target)/decompress.bin: $(OBJECTS)
-- $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
-- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
-
--$(objtree)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
-- cat $(target)/decompress.bin piggy.img > $(objtree)/vmlinuz
-- rm -f piggy.img
-- cp $(objtree)/vmlinuz $(src)
-+quiet_cmd_image = BUILD $@
-+cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
--$(target)/head.o: $(src)/head.S
-- $(CC) -D__ASSEMBLY__ -c $< -o $@
-+targets := vmlinux piggy.gz decompress.o decompress.bin
-
--# gzip the kernel image
-+$(obj)/decompress.o: $(OBJECTS) FORCE
-+ $(call if_changed,ld)
-
--piggy.img: $(SYSTEM)
-- cat $(SYSTEM) | gzip -f -9 > piggy.img
-+$(obj)/decompress.bin: $(obj)/decompress.o FORCE
-+ $(call if_changed,objcopy)
-
--clean:
-- rm -f piggy.img $(objtree)/vmlinuz vmlinuz.o decompress.o decompress.bin $(OBJECTS)
-+$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
-+ $(call if_changed,image)
-
-+$(obj)/piggy.gz: $(obj)/../Image FORCE
-+ $(call if_changed,gzip)
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/README linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/README
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/README 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/README 2003-08-21 11:37:03.000000000 +0200
-@@ -5,14 +5,14 @@
- This can be slightly confusing because it's a process with many steps.
-
- The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
--by that makefile into text and data binary files, vmlinux.text and
-+by that makefile into text and data binary files, vmlinux.text and
- vmlinux.data.
-
- Those files together with a ROM filesystem can be catted together and
- burned into a flash or executed directly at the DRAM origin.
-
- They can also be catted together and compressed with gzip, which is what
--happens in this makefile. Together they make up piggy.img.
-+happens in this makefile. Together they make up piggy.img.
-
- The decompressor is built into the file decompress.o. It is turned into
- the binary file decompress.bin, which is catted together with piggy.img
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/decompress.ld linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/decompress.ld
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/decompress.ld 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/decompress.ld 2003-08-21 11:57:56.000000000 +0200
-@@ -1,7 +1,7 @@
- /*#OUTPUT_FORMAT(elf32-us-cris) */
- OUTPUT_ARCH (crisv32)
-
--MEMORY
-+MEMORY
- {
- dram : ORIGIN = 0x40700000,
- LENGTH = 0x00100000
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/head.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/head.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/head.S 2007-01-09 10:29:20.000000000 +0100
-@@ -2,19 +2,19 @@
- * Code that sets up the DRAM registers, calls the
- * decompressor to unpack the piggybacked kernel, and jumps.
- *
-- * Copyright (C) 1999 - 2003, Axis Communications AB
-+ * Copyright (C) 1999 - 2006, Axis Communications AB
- */
-
- #define ASSEMBLER_MACROS_ONLY
- #include <asm/arch/hwregs/asm/reg_map_asm.h>
- #include <asm/arch/hwregs/asm/gio_defs_asm.h>
- #include <asm/arch/hwregs/asm/config_defs_asm.h>
--
-+
- #define RAM_INIT_MAGIC 0x56902387
- #define COMMAND_LINE_MAGIC 0x87109563
-
- ;; Exported symbols
--
-+
- .globl input_data
-
- .text
-@@ -29,53 +29,16 @@
- REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
- move.d $r0, [$r1]
-
-- ;; If booting from NAND flash we first have to copy some
-- ;; data from NAND flash to internal RAM to get the code
-- ;; that initializes the SDRAM. Lets copy 20 KB. This
-- ;; code executes at 0x38010000 if booting from NAND and
-- ;; we are guaranted that at least 0x200 bytes are good so
-- ;; lets start from there. The first 8192 bytes in the nand
-- ;; flash is spliced with zeroes and is thus 16384 bytes.
-- move.d 0x38010200, $r10
-- move.d 0x14200, $r11 ; Start offset in NAND flash 0x10200 + 16384
-- move.d 0x5000, $r12 ; Length of copy
--
-- ;; Before this code the tools add a partitiontable so the PC
-- ;; has an offset from the linked address.
--offset1:
-- lapcq ., $r13 ; get PC
-- add.d first_copy_complete-offset1, $r13
--
--#include "../../lib/nand_init.S"
--
--first_copy_complete:
-- ;; Initialze the DRAM registers.
-+ ;; Initialize the DRAM registers.
- cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized?
- beq dram_init_finished
- nop
-
- #include "../../lib/dram_init.S"
--
-+
- dram_init_finished:
-- lapcq ., $r13 ; get PC
-- add.d second_copy_complete-dram_init_finished, $r13
--
-- move.d REG_ADDR(config, regi_config, r_bootsel), $r0
-- move.d [$r0], $r0
-- and.d REG_MASK(config, r_bootsel, boot_mode), $r0
-- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
-- bne second_copy_complete ; No NAND boot
-- nop
--
-- ;; Copy 2MB from NAND flash to SDRAM (at 2-4MB into the SDRAM)
-- move.d 0x40204000, $r10
-- move.d 0x8000, $r11
-- move.d 0x200000, $r12
-- ba copy_nand_to_ram
-- nop
--second_copy_complete:
--
-- ;; Initiate the PA port.
-+
-+ ;; Initiate the GIO ports.
- move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
- move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
- move.d $r0, [$r1]
-@@ -84,57 +47,74 @@
- move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r1
- move.d $r0, [$r1]
-
-+ move.d CONFIG_ETRAX_DEF_GIO_PB_OUT, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PB_OE, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PC_OUT, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pc_dout), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PC_OE, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pc_oe), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PD_OUT, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pd_dout), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PD_OE, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pd_oe), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PE_OUT, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pe_dout), $r1
-+ move.d $r0, [$r1]
-+
-+ move.d CONFIG_ETRAX_DEF_GIO_PE_OE, $r0
-+ move.d REG_ADDR(gio, regi_gio, rw_pe_oe), $r1
-+ move.d $r0, [$r1]
-+
- ;; Setup the stack to a suitably high address.
-- ;; We assume 8 MB is the minimum DRAM and put
-+ ;; We assume 8 MB is the minimum DRAM and put
- ;; the SP at the top for now.
-
- move.d 0x40800000, $sp
-
-- ;; Figure out where the compressed piggyback image is
-- ;; in the flash (since we wont try to copy it to DRAM
-- ;; before unpacking). It is at _edata, but in flash.
-+ ;; Figure out where the compressed piggyback image is.
-+ ;; It is either in [NOR] flash (we don't want to copy it
-+ ;; to DRAM before unpacking), or copied to DRAM
-+ ;; by the [NAND] flash boot loader.
-+ ;; The piggyback image is at _edata, but relative to where the
-+ ;; image is actually located in memory, not where it is linked
-+ ;; (the decompressor is linked at 0x40700000+ and runs there).
- ;; Use (_edata - herami) as offset to the current PC.
-
-- move.d REG_ADDR(config, regi_config, r_bootsel), $r0
-- move.d [$r0], $r0
-- and.d REG_MASK(config, r_bootsel, boot_mode), $r0
-- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
-- beq hereami2
-- nop
--hereami:
-+hereami:
- lapcq ., $r5 ; get PC
- and.d 0x7fffffff, $r5 ; strip any non-cache bit
-- move.d $r5, $r0 ; save for later - flash address of 'herami'
-+ move.d $r5, $r0 ; source address of 'herami'
- add.d _edata, $r5
- sub.d hereami, $r5 ; r5 = flash address of '_edata'
- move.d hereami, $r1 ; destination
-- ba 2f
-- nop
--hereami2:
-- lapcq ., $r5 ; get PC
-- and.d 0x00ffffff, $r5 ; strip any non-cache bit
-- move.d $r5, $r6
-- or.d 0x40200000, $r6
-- move.d $r6, $r0 ; save for later - flash address of 'herami'
-- add.d _edata, $r5
-- sub.d hereami2, $r5 ; r5 = flash address of '_edata'
-- add.d 0x40200000, $r5
-- move.d hereami2, $r1 ; destination
--2:
-- ;; Copy text+data to DRAM
-
-+ ;; Copy text+data to DRAM
-+
- move.d _edata, $r2 ; end destination
--1: move.w [$r0+], $r3
-- move.w $r3, [$r1+]
-- cmp.d $r2, $r1
-+1: move.w [$r0+], $r3 ; from herami+ source
-+ move.w $r3, [$r1+] ; to hereami+ destination (linked address)
-+ cmp.d $r2, $r1 ; finish when destination == _edata
- bcs 1b
- nop
--
-- move.d input_data, $r0 ; for the decompressor
-+ move.d input_data, $r0 ; for the decompressor
- move.d $r5, [$r0] ; for the decompressor
-
- ;; Clear the decompressors BSS (between _edata and _end)
--
-+
- moveq 0, $r0
- move.d _edata, $r1
- move.d _end, $r2
-@@ -144,40 +124,47 @@
- nop
-
- ;; Save command line magic and address.
-- move.d _cmd_line_magic, $r12
-- move.d $r10, [$r12]
-- move.d _cmd_line_addr, $r12
-- move.d $r11, [$r12]
--
-+ move.d _cmd_line_magic, $r0
-+ move.d $r10, [$r0]
-+ move.d _cmd_line_addr, $r0
-+ move.d $r11, [$r0]
-+
-+ ;; Save boot source indicator
-+ move.d _boot_source, $r0
-+ move.d $r12, [$r0]
-+
- ;; Do the decompression and save compressed size in _inptr
-
- jsr decompress_kernel
- nop
-
-+ ;; Restore boot source indicator
-+ move.d _boot_source, $r12
-+ move.d [$r12], $r12
-+
- ;; Restore command line magic and address.
- move.d _cmd_line_magic, $r10
- move.d [$r10], $r10
- move.d _cmd_line_addr, $r11
- move.d [$r11], $r11
--
-+
- ;; Put start address of root partition in r9 so the kernel can use it
- ;; when mounting from flash
- move.d input_data, $r0
- move.d [$r0], $r9 ; flash address of compressed kernel
- move.d inptr, $r0
- add.d [$r0], $r9 ; size of compressed kernel
-- cmp.d 0x40200000, $r9
-- blo enter_kernel
-- nop
-- sub.d 0x40200000, $r9
-- add.d 0x4000, $r9
--
--enter_kernel:
-+ cmp.d 0x40000000, $r9 ; image in DRAM ?
-+ blo enter_kernel ; no, must be [NOR] flash, jump
-+ nop ; delay slot
-+ and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M
-+
-+enter_kernel:
- ;; Enter the decompressed kernel
- move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized
- jump 0x40004000 ; kernel is linked to this address
- nop
--
-+
- .data
-
- input_data:
-@@ -185,8 +172,8 @@
- _cmd_line_magic:
- .dword 0
- _cmd_line_addr:
-+ .dword 0
-+_boot_source:
- .dword 0
--is_nand_boot:
-- .dword 0
--
-+
- #include "../../lib/hw_settings.S"
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/misc.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/misc.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/compressed/misc.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/compressed/misc.c 2006-11-03 11:35:51.000000000 +0100
-@@ -1,15 +1,15 @@
- /*
- * misc.c
- *
-- * $Id: misc.c,v 1.8 2005/04/24 18:34:29 starvik Exp $
-- *
-- * This is a collection of several routines from gzip-1.0.3
-+ * $Id: misc.c,v 1.12 2006/11/03 10:35:51 pkj Exp $
-+ *
-+ * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adoptation for Linux/CRIS Axis Communications AB, 1999
-- *
-+ *
- */
-
- /* where the piggybacked kernel image expects itself to live.
-@@ -20,11 +20,11 @@
-
- #define KERNEL_LOAD_ADR 0x40004000
-
--
- #include <linux/types.h>
- #include <asm/arch/hwregs/reg_rdwr.h>
- #include <asm/arch/hwregs/reg_map.h>
- #include <asm/arch/hwregs/ser_defs.h>
-+#include <asm/arch/hwregs/pinmux_defs.h>
-
- /*
- * gzip declarations
-@@ -66,8 +66,8 @@
- #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
- #define RESERVED 0xC0 /* bit 6,7: reserved */
-
--#define get_byte() inbuf[inptr++]
--
-+#define get_byte() inbuf[inptr++]
-+
- /* Diagnostic functions */
- #ifdef DEBUG
- # define Assert(cond,msg) {if(!(cond)) error(msg);}
-@@ -96,20 +96,20 @@
- static long bytes_out = 0;
- static uch *output_data;
- static unsigned long output_ptr = 0;
--
-+
- static void *malloc(int size);
- static void free(void *where);
- static void error(char *m);
- static void gzip_mark(void **);
- static void gzip_release(void **);
--
-+
- static void puts(const char *);
-
- /* the "heap" is put directly after the BSS ends, at end */
--
-+
- extern int _end;
- static long free_mem_ptr = (long)&_end;
--
-+
- #include "../../../../../lib/inflate.c"
-
- static void *malloc(int size)
-@@ -152,7 +152,7 @@
- rs = REG_RD(ser, regi_ser, rs_stat_din);
- }
- while (!rs.tr_rdy);/* Wait for tranceiver. */
--
-+
- REG_WR(ser, regi_ser, rw_dout, dout);
- }
-
-@@ -209,9 +209,9 @@
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
--
-+
- in = window;
-- out = &output_data[output_ptr];
-+ out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-@@ -225,9 +225,9 @@
- static void
- error(char *x)
- {
-- puts("\n\n");
-+ puts("\r\n\n");
- puts(x);
-- puts("\n\n -- System halted\n");
-+ puts("\r\n\n -- System halted\n");
-
- while(1); /* Halt */
- }
-@@ -246,13 +246,13 @@
- reg_ser_rw_rec_ctrl rec_ctrl;
- reg_ser_rw_tr_baud_div tr_baud;
- reg_ser_rw_rec_baud_div rec_baud;
--
-+
- /* Turn off XOFF. */
- xoff = REG_RD(ser, regi_ser, rw_xoff);
--
-+
- xoff.chr = 0;
- xoff.automatic = regk_ser_no;
--
-+
- REG_WR(ser, regi_ser, rw_xoff, xoff);
-
- /* Set baudrate and stopbits. */
-@@ -260,19 +260,21 @@
- rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
- tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
- rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
--
-+
- tr_ctrl.stop_bits = 1; /* 2 stop bits. */
--
-- /*
-- * The baudrate setup is a bit fishy, but in the end the tranceiver is
-- * set to 4800 and the receiver to 115200. The magic value is
-- * 29.493 MHz.
-+ tr_ctrl.en = 1; /* enable transmitter */
-+ rec_ctrl.en = 1; /* enabler receiver */
-+
-+ /*
-+ * The baudrate setup used to be a bit fishy, but now transmitter and
-+ * receiver are both set to the intended baud rate, 115200.
-+ * The magic value is 29.493 MHz.
- */
- tr_ctrl.base_freq = regk_ser_f29_493;
- rec_ctrl.base_freq = regk_ser_f29_493;
-- tr_baud.div = (29493000 / 8) / 4800;
-+ tr_baud.div = (29493000 / 8) / 115200;
- rec_baud.div = (29493000 / 8) / 115200;
--
-+
- REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
- REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
- REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
-@@ -283,22 +285,28 @@
- decompress_kernel()
- {
- char revision;
--
-+ reg_pinmux_rw_hwprot hwprot;
-+
- /* input_data is set in head.S */
- inbuf = input_data;
--
-+
-+ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
- #ifdef CONFIG_ETRAX_DEBUG_PORT0
- serial_setup(regi_ser0);
- #endif
- #ifdef CONFIG_ETRAX_DEBUG_PORT1
-+ hwprot.ser1 = regk_pinmux_yes;
- serial_setup(regi_ser1);
- #endif
- #ifdef CONFIG_ETRAX_DEBUG_PORT2
-+ hwprot.ser2 = regk_pinmux_yes;
- serial_setup(regi_ser2);
- #endif
- #ifdef CONFIG_ETRAX_DEBUG_PORT3
-+ hwprot.ser3 = regk_pinmux_yes;
- serial_setup(regi_ser3);
- #endif
-+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-
- setup_normal_output_buffer();
-
-@@ -307,11 +315,11 @@
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 32)
- {
-- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\n");
-+ puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
- while(1);
- }
-
-- puts("Uncompressing Linux...\n");
-+ puts("Uncompressing Linux...\r\n");
- gunzip();
-- puts("Done. Now booting the kernel.\n");
-+ puts("Done. Now booting the kernel.\r\n");
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/Makefile 2007-01-17 14:24:50.000000000 +0100
-@@ -1,36 +1,29 @@
- #
--# Makefile for rescue code
-+# Makefile for rescue (bootstrap) code
- #
--target = $(target_rescue_dir)
--src = $(src_rescue_dir)
-
- CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
- CFLAGS = -O2
--LD = gcc-cris -mlinux -march=v32 -nostdlib
-+LD = gcc-cris -mlinux -march=v32 -nostdlib
-+LDFLAGS = -T $(obj)/rescue.ld
-+LDPOSTFLAGS = -lgcc
- OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
--
--all: $(target)/rescue.bin
--
--rescue: rescue.bin
-- # do nothing
--
--$(target)/rescue.bin: $(target) $(target)/head.o
-- $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
-- $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
-- cp -p $(target)/rescue.bin $(objtree)
--
--$(target):
-- mkdir -p $(target)
--
--$(target)/head.o: $(src)/head.S
-- $(CC) -D__ASSEMBLY__ -c $< -o $*.o
--
--clean:
-- rm -f $(target)/*.o $(target)/*.bin
--
--fastdep:
--
--modules:
--
--modules-install:
-+obj-y = head.o bootload.o crisv32_nand.o nand_base.o nand_ids.o nand_ecc.o \
-+ lib.o
-+OBJECTS = $(obj)/head.o $(obj)/bootload.o \
-+ $(obj)/crisv32_nand.o $(obj)/nand_base.o \
-+ $(obj)/nand_ids.o $(obj)/nand_ecc.o \
-+ $(obj)/lib.o $(obj)/../../lib/lib.a
-+
-+targets := rescue.o rescue.bin
-+
-+quiet_cmd_ldlibgcc = LD $@
-+cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-+
-+$(obj)/rescue.o: $(OBJECTS) FORCE
-+ $(call if_changed,ldlibgcc)
-+
-+$(obj)/rescue.bin: $(obj)/rescue.o FORCE
-+ $(call if_changed,objcopy)
-+ cp -p $(obj)/rescue.bin $(objtree)
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/bootload.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/bootload.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/bootload.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/bootload.c 2006-11-28 11:05:39.000000000 +0100
-@@ -0,0 +1,277 @@
-+/*
-+ * bootload.c
-+ * Simple boot loader for NAND chips on Etrax FS
-+ *
-+ * $Id: bootload.c,v 1.8 2006/11/28 10:05:39 ricardw Exp $
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+
-+#include "mtd.h"
-+#include "nand.h"
-+
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/reg_map.h>
-+#include <asm/arch/hwregs/pinmux_defs.h>
-+
-+#include "lib.h"
-+
-+#define BOOT_ADDR (CONFIG_ETRAX_PTABLE_SECTOR + 0x40200000)
-+
-+/* bits for nand_rw() `cmd'; or together as needed */
-+
-+#define NANDRW_READ 0x01
-+#define NANDRW_WRITE 0x00
-+#define NANDRW_JFFS2 0x02
-+#define NANDRW_JFFS2_SKIP 0x04
-+
-+#define ROUND_DOWN(value, boundary) ((value) & (~((boundary)-1)))
-+
-+/* set $r8 to RAM_INIT_MAGIC, $r12 to NAND_BOOT_MAGIC then jump */
-+#define BOOT(addr) __asm__ volatile (" \
-+ move.d 0x56902387, $r8\n\
-+ move.d 0x9A9DB001, $r12\n\
-+ jump %0\n\
-+ nop\n\
-+ " : : "r" (addr))
-+
-+#define D(x)
-+
-+extern struct mtd_info *crisv32_nand_flash_probe(void);
-+
-+extern int _end, _bss, _edata;
-+
-+/*
-+ * NAND read/write from U-Boot 1.4.4
-+ * Modified for newer mtd and use of mtd interface instead of nand directly.
-+ *
-+ * cmd: 0: NANDRW_WRITE write, fail on bad block
-+ * 1: NANDRW_READ read, fail on bad block
-+ * 2: NANDRW_WRITE | NANDRW_JFFS2 write, skip bad blocks
-+ * 3: NANDRW_READ | NANDRW_JFFS2 read, data all 0xff for bad blocks
-+ * 7: NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP read, skip bad blocks
-+ */
-+static int
-+nand_rw (struct mtd_info* mtd, int cmd,
-+ size_t start, size_t len,
-+ size_t *retlen, u_char * buf)
-+{
-+ int ret = 0, n, total = 0;
-+
-+ /* eblk (once set) is the start of the erase block containing the
-+ * data being processed.
-+ */
-+ size_t eblk = ~0; /* force mismatch on first pass */
-+ size_t erasesize = mtd->erasesize;
-+
-+ while (len) {
-+ if ((start & (-erasesize)) != eblk) {
-+ /* have crossed into new erase block, deal with
-+ * it if it is marked bad.
-+ */
-+ eblk = start & (-erasesize); /* start of block */
-+ D(
-+ puts("New block ");
-+ putx(eblk);
-+ putnl();
-+ )
-+ if (mtd->block_isbad(mtd, eblk)) {
-+ if (cmd == (NANDRW_READ | NANDRW_JFFS2)) {
-+ while (len > 0 &&
-+ start - eblk < erasesize) {
-+ *(buf++) = 0xff;
-+ ++start;
-+ ++total;
-+ --len;
-+ }
-+ continue;
-+ } else if (cmd == (NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP)) {
-+ start += erasesize;
-+ continue;
-+ } else if (cmd == (NANDRW_WRITE | NANDRW_JFFS2)) {
-+ /* skip bad block */
-+ start += erasesize;
-+ continue;
-+ } else {
-+ ret = 1;
-+ break;
-+ }
-+ }
-+ }
-+ /* The ECC will not be calculated correctly if
-+ less than 512 is written or read */
-+ /* Is request at least 512 bytes AND it starts on a proper boundry */
-+ if((start != ROUND_DOWN(start, 0x200)) || (len < 0x200))
-+ puts("Warning block writes should be at least 512 bytes and start on a 512 byte boundry\r\n");
-+
-+#if 0
-+ buf = (void *) 0x38008000; /* to fixed address, for testing */
-+#endif
-+
-+ if (cmd & NANDRW_READ) {
-+ ret = mtd->read_ecc(mtd, start,
-+ min(len, eblk + erasesize - start),
-+ (size_t *)&n, (u_char*)buf,
-+ NULL, NULL);
-+ } else {
-+ ret = mtd->write_ecc(mtd, start,
-+ min(len, eblk + erasesize - start),
-+ (size_t *)&n, (u_char*)buf,
-+ NULL, NULL);
-+ }
-+
-+ if (ret) {
-+ break;
-+ }
-+
-+ start += n;
-+ buf += n;
-+ total += n;
-+ len -= n;
-+ }
-+ if (retlen)
-+ *retlen = total;
-+
-+ return ret;
-+}
-+
-+
-+void
-+bootload()
-+{
-+ char revision;
-+ struct mtd_info *mtd;
-+
-+ serial_init();
-+
-+ __asm__ volatile ("move $vr,%0" : "=rm" (revision));
-+ if (revision < 32)
-+ {
-+ puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
-+ while(1);
-+ }
-+
-+ puts("\r\n\nETRAX FS NAND boot loader\r\n");
-+ puts("=========================\r\n");
-+ puts("Rev 1, " __DATE__ " " __TIME__ "\r\n");
-+
-+ puts("CPU revision: ");
-+ putx(revision);
-+ putnl();
-+
-+ puts("Bootloader main at ") ;
-+ putx((int) bootload);
-+ putnl();
-+
-+ puts("Data end: ");
-+ putx((long) &_edata);
-+ putnl();
-+
-+ puts("Bss: ");
-+ putx((long) &_bss);
-+ putnl();
-+
-+ puts("Heap: ");
-+ putx((long) &_end);
-+ putnl();
-+
-+#if 0 /* loop calibration */
-+ volatile int i;
-+ puts ("10000 loops...");
-+ for (i = 0; i < 10000; i++)
-+ udelay(1000);
-+ puts("done\r\n");
-+#endif
-+
-+ puts("Identifying nand chip...\r\n");
-+ mtd = crisv32_nand_flash_probe();
-+ puts("Done.\r\n");
-+
-+ if (mtd) {
-+ puts("Chip identified. ");
-+#if 0 /* print chip parameters */
-+ if (mtd->name)
-+ puts(mtd->name);
-+
-+ puts("\r\ntype: ");
-+ putx(mtd->type);
-+ puts("\r\nflags: ");
-+ putx(mtd->flags);
-+ puts("\r\nsize: ");
-+ putx(mtd->size);
-+ puts("\r\nerasesize: ");
-+ putx(mtd->erasesize);
-+ puts("\r\noobblock: ");
-+ putx(mtd->oobblock);
-+ puts("\r\noobsize: ");
-+ putx(mtd->oobsize);
-+ puts("\r\necctype: ");
-+ putx(mtd->ecctype);
-+ puts("\r\neccsize: ");
-+ putx(mtd->eccsize);
-+#endif
-+ putnl();
-+
-+ puts("Bad blocks:\r\n");
-+
-+ int i;
-+ for (i = 0; i < mtd->size; i += mtd->erasesize) {
-+ if (mtd->block_isbad(mtd, i)) {
-+ putx(i);
-+ putnl();
-+ }
-+ }
-+
-+#if 0 /* print oob parameters */
-+ puts("Oob info:\r\n");
-+ puts("useecc: ");
-+ putx(mtd->oobinfo.useecc);
-+ puts("\r\neccbytes: ");
-+ putx(mtd->oobinfo.eccbytes);
-+ puts("\r\neccpos: ");
-+ for (i = 0; i < mtd->oobinfo.eccbytes; i++) {
-+ putx(mtd->oobinfo.eccpos[i]);
-+ putc(' ');
-+ }
-+ putnl();
-+#endif
-+
-+ puts("Bootload in progress...");
-+ int res, copied;
-+ res = nand_rw(mtd,
-+ NANDRW_READ | NANDRW_JFFS2 | NANDRW_JFFS2_SKIP,
-+ CONFIG_ETRAX_PTABLE_SECTOR,
-+ 0x200000, /* 2 megs */
-+ &copied,
-+ (void *) BOOT_ADDR);
-+
-+ puts("complete, status ");
-+ putx(res);
-+ puts(", loaded ");
-+ putx(copied);
-+ puts(" bytes\r\n");
-+#if 1
-+ puts("Data in DRAM:\r\n");
-+ putx(* (int *) (BOOT_ADDR + 0));
-+ putc(' ');
-+ putx(* (int *) (BOOT_ADDR + 4));
-+ putc(' ');
-+ putx(* (int *) (BOOT_ADDR + 8));
-+ putnl();
-+#endif
-+
-+ if (res)
-+ error("Corrupt data in NAND flash.");
-+ else
-+ {
-+ puts("Booting...\r\n");
-+ BOOT(BOOT_ADDR);
-+ }
-+ } else
-+ error("No NAND flash chip found to boot from.");
-+
-+ while (1)
-+ ; /* hang around until hell freezes over */
-+}
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/crisv32_nand.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/crisv32_nand.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/crisv32_nand.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/crisv32_nand.c 2006-11-21 15:40:02.000000000 +0100
-@@ -0,0 +1,157 @@
-+/*
-+ * Taken from arch/cris/arch-v32/drivers/nandflash.c
-+ * and modified to use for boot loader.
-+ *
-+ * Copyright (c) 2004
-+ *
-+ * Derived from drivers/mtd/nand/spia.c
-+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
-+ *
-+ * $Id: crisv32_nand.c,v 1.2 2006/11/21 14:40:02 ricardw Exp $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include "mtd.h"
-+#include "nand.h"
-+
-+#if 0
-+#include <linux/mtd/partitions.h>
-+#endif
-+
-+#if 0
-+#include <asm/arch/memmap.h>
-+#endif
-+
-+#include <asm/arch/hwregs/reg_map.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/gio_defs.h>
-+#include <asm/arch/hwregs/bif_core_defs.h>
-+
-+#include "lib.h"
-+
-+/* Hardware */
-+
-+#define CE_BIT 4
-+#define CLE_BIT 5
-+#define ALE_BIT 6
-+#define BY_BIT 7
-+
-+#define NAND_RD_ADDR 0x90000000 /* read address */
-+#define NAND_WR_ADDR 0x94000000 /* write address */
-+
-+static struct mtd_info *crisv32_mtd = NULL;
-+
-+/*
-+ * hardware specific access to control-lines
-+ */
-+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+ unsigned long flags;
-+ reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout);
-+
-+ switch(cmd){
-+ case NAND_CTL_SETCLE:
-+ dout.data |= (1<<CLE_BIT);
-+ break;
-+ case NAND_CTL_CLRCLE:
-+ dout.data &= ~(1<<CLE_BIT);
-+ break;
-+ case NAND_CTL_SETALE:
-+ dout.data |= (1<<ALE_BIT);
-+ break;
-+ case NAND_CTL_CLRALE:
-+ dout.data &= ~(1<<ALE_BIT);
-+ break;
-+ case NAND_CTL_SETNCE:
-+ dout.data &= ~(1<<CE_BIT);
-+ break;
-+ case NAND_CTL_CLRNCE:
-+ dout.data |= (1<<CE_BIT);
-+ break;
-+ }
-+ REG_WR(gio, regi_gio, rw_pa_dout, dout);
-+#if 0
-+ /* read from gpio reg to flush pipeline.
-+ * doesn't seem to be necessary.
-+ */
-+ (void) REG_RD(gio, regi_gio, rw_pa_dout); /* gpio sync */
-+#endif
-+}
-+
-+/*
-+ * read device ready pin
-+ */
-+int crisv32_device_ready(struct mtd_info *mtd)
-+{
-+ reg_gio_r_pa_din din = REG_RD(gio, regi_gio, r_pa_din);
-+ return ((din.data & (1 << BY_BIT)) >> BY_BIT);
-+}
-+
-+/*
-+ * Main initialization routine
-+ */
-+struct mtd_info* crisv32_nand_flash_probe (void)
-+{
-+ reg_bif_core_rw_grp3_cfg bif_cfg = REG_RD(bif_core, regi_bif_core, rw_grp3_cfg);
-+ reg_gio_rw_pa_oe pa_oe = REG_RD(gio, regi_gio, rw_pa_oe);
-+ struct nand_chip *this;
-+ int err = 0;
-+
-+ /* Allocate memory for MTD device structure and private data */
-+ crisv32_mtd = malloc (sizeof(struct mtd_info) + sizeof (struct nand_chip));
-+ if (!crisv32_mtd) {
-+ puts ("Unable to allocate CRISv32 NAND MTD device structure.\r\n");
-+ err = -ENOMEM;
-+ return NULL;
-+ }
-+
-+ /* Get pointer to private data */
-+ this = (struct nand_chip *) (&crisv32_mtd[1]);
-+
-+ pa_oe.oe |= 1 << CE_BIT;
-+ pa_oe.oe |= 1 << ALE_BIT;
-+ pa_oe.oe |= 1 << CLE_BIT;
-+ pa_oe.oe &= ~ (1 << BY_BIT);
-+ REG_WR(gio, regi_gio, rw_pa_oe, pa_oe);
-+
-+ bif_cfg.gated_csp0 = regk_bif_core_rd;
-+ bif_cfg.gated_csp1 = regk_bif_core_wr;
-+ REG_WR(bif_core, regi_bif_core, rw_grp3_cfg, bif_cfg);
-+
-+ /* Initialize structures */
-+ memset((char *) crisv32_mtd, 0, sizeof(struct mtd_info));
-+ memset((char *) this, 0, sizeof(struct nand_chip));
-+
-+ /* Link the private data with the MTD structure */
-+ crisv32_mtd->priv = this;
-+
-+ /* Set address of NAND IO lines */
-+ this->IO_ADDR_R = (void *) NAND_RD_ADDR;
-+ this->IO_ADDR_W = (void *) NAND_WR_ADDR;
-+ this->hwcontrol = crisv32_hwcontrol;
-+ this->dev_ready = crisv32_device_ready;
-+ /* 20 us command delay time */
-+ this->chip_delay = 20;
-+ this->eccmode = NAND_ECC_SOFT;
-+
-+#if 0 /* don't use BBT in boot loader */
-+ /* Enable the following for a flash based bad block table */
-+ this->options = NAND_USE_FLASH_BBT;
-+#endif
-+ /* don't scan for BBT */
-+ this->options = NAND_SKIP_BBTSCAN;
-+
-+ /* Scan to find existance of the device */
-+ if (nand_scan (crisv32_mtd, 1)) {
-+ err = -ENXIO;
-+ puts ("nand_scan failed\r\n");
-+ free (crisv32_mtd);
-+ return NULL;
-+ }
-+
-+ return crisv32_mtd;
-+}
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/head.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/head.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/head.S 2007-01-31 16:52:19.000000000 +0100
-@@ -1,14 +1,85 @@
--/* $Id: head.S,v 1.4 2004/11/01 16:10:28 starvik Exp $
-- *
-- * This used to be the rescue code but now that is handled by the
-- * RedBoot based RFL instead. Nothing to see here, move along.
-+/* $Id: head.S,v 1.16 2007/01/31 15:52:19 pkj Exp $
-+ *
-+ * Simple boot loader which can also handle NAND chips.
- */
-
--#include <asm/arch/hwregs/reg_map_asm.h>
--#include <asm/arch/hwregs/config_defs_asm.h>
-+#include <asm/arch/hwregs/asm/reg_map_asm.h>
-+#include <asm/arch/hwregs/asm/config_defs_asm.h>
-+
-+#define RAM_INIT_MAGIC 0x56902387
-+#define NAND_BOOT_MAGIC 0x9A9DB001
-+
-+;; Debugging. Normally all these are set to 0.
-+#define LEDS (0)
-+#define LEDTEST (0)
-+#define FLASH_LEDS_INSTEAD_OF_BOOT (0)
-+#define SERIAL_DUMP (0)
-+#define SERIAL_PORT (0)
-+#define SERIAL_RECEIVE (0)
-+
-+#if LEDS
-+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
-+#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
-+#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
-+#endif
-+
-+#if SERIAL_DUMP
-+#include <asm/arch/hwregs/asm/ser_defs_asm.h>
-+#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
-+#endif
-+
-+
-+#if (SERIAL_PORT == 0)
-+#define regi_serial regi_ser0
-+#endif
-+#if (SERIAL_PORT == 1)
-+#define regi_serial regi_ser1
-+#endif
-+
-+;; Macros
-+
-+#if LEDS
-+.macro SAY x
-+ orq 31, $r9
-+ and.d ~(\x), $r9
-+ move.d $r9, [$r8]
-+.endm
-+#else
-+.macro SAY x
-+ ;; nothing
-+.endm
-+#endif
-+
-+#if SERIAL_DUMP
-+.macro DISPLAY x
-+ move.d \x, $r6 ; save value
-+ moveq 28, $r5 ; counter / shift amount
-+8:
-+ move.d $r6, $r3 ; fetch value
-+ bsr nybbleout
-+ lsr.d $r5, $r3 ; shift nybble we want (delay slot)
-+ subq 4, $r5 ; count down bits
-+ bpl 8b ; loop
-+ nop
-+ bsr serout
-+ moveq 13, $r3 ; delay slot
-+ bsr serout
-+ moveq 10, $r3 ; delay slot
-+.endm
-+#else
-+.macro DISPLAY x
-+ ;; nothing
-+.endm
-+#endif
-+
-+
-+;; Code
-
- .text
-+start:
-
-+ ;; TODO: Add code for Ronny's search-for-good-block boot rom algorithm
-+
- ;; Start clocks for used blocks.
- move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
- move.d [$r1], $r0
-@@ -17,22 +88,258 @@
- REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
- move.d $r0, [$r1]
-
-- ;; Copy 68KB NAND flash to Internal RAM (if NAND boot)
-- move.d 0x38004000, $r10
-- move.d 0x8000, $r11
-- move.d 0x11000, $r12
-- move.d copy_complete, $r13
-- and.d 0x000fffff, $r13
-- or.d 0x38000000, $r13
-+
-+#if LEDS
-+ ;; set up for led control on PB 0..4
-+ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r8 ; output reg
-+ move.d [$r8], $r9 ; shadow
-+
-+ ;; set up pinmux
-+ move.d REG_ADDR(pinmux, regi_pinmux, rw_pb_gio), $r2
-+ move.d [$r2], $r3
-+ orq 31, $r3
-+ move.d $r3, [$r2]
-+
-+ ;; set up GPIO
-+ ;; set to outputs
-+ move.d REG_ADDR(gio, regi_gio, rw_pb_oe), $r2
-+ move.d [$r2], $r3
-+ orq 31, $r3
-+ move.d $r3, [$r2]
-+
-+
-+#if LEDTEST
-+ ;; led test
-+
-+ moveq 0, $r1 ; led 5-bit binary counter
-+1:
-+ or.d 31, $r9
-+ xor $r1, $r9
-+ move.d $r9, [$r8]
-+ addq 1, $r1
-+
-+ move.d 100000000, $r2 ; delay loop (100e6 => 1s @200Mc)
-+2:
-+ bne 2b
-+ subq 1, $r2
-+
-+ ba 1b ; loop
-+ nop
-+#endif
-+
-+#endif
-+
-+
-+check_nand_boot:
-+ ;; Check boot source by checking highest nybble of PC:
-+ ;; If we're running at address 0x0XXXXXXX, we're in flash/eprom/sram
-+ ;; If we're running at address 0x38000000, we're in internal RAM,
-+ ;; so we're most likely coming from NAND.
-+ ;; If we're running at address 0x40000000, we're in SDRAM,
-+ ;; so we've most likely been started by some sort of bootstrapper
-+ ;; e.g. fsboot, which in turn implies NAND, else we would be booting
-+ ;; normally at 0x0XXXXXXX
-+
-+ SAY 1
-+
-+here:
-+ lapcq ., $r0 ; get PC
-+ sub.d (here-start), $r0 ; offset from here
-+ beq normal_boot ; running at address 0 - normal boot
-+ move.d $r0, $r13 ; save offset for later (unused delay slot)
-+ lsrq 28, $r0 ; get highest nybble
-+
-+ SAY 2
-+
-+ ;; Prepare to copy 128KB of the NAND flash to internal RAM
-+ move.d 0x38000200, $r10 ; dest in internal RAM
-+ move.d 0x1fe00, $r12 ; #bytes
-+ cmpq 4, $r0 ; running in RAM => started by fsboot
-+ bhs copy_from_ram
-+ movu.w 0x0200, $r11 ; source in flash (byte address) (DELAY SLOT)
-
- #include "../../lib/nand_init.S"
-
-- ;; No NAND found
-+#if LEDS
-+ ;; must set up registers again (clobbered by nand_init)
-+ move.d REG_ADDR(gio, regi_gio, rw_pb_dout), $r8 ; output reg
-+ move.d [$r8], $r9 ; shadow
-+#endif
-+
-+ SAY 3
-+
-+ ba copy_complete
-+ nop
-+
-+ ; Since the code above has to reside within the first 256 bytes of
-+ ; NAND flash, verify that the code so far hasn't gone past this
-+ ; limit. If you're considering removing this, you haven't
-+ ; properly understood the problem; see nand_init.S for details.
-+ .org PAGE_SIZE_ADDRESSES ; from nand_init.S
-+ .org PAGE_SIZE_BYTES ; from nand_init.S
-+
-+normal_boot:
-+ SAY 4
-+
-+ ;; Normal NOR boot
- move.d CONFIG_ETRAX_PTABLE_SECTOR, $r10
-- jump $r10 ; Jump to decompresser
-+ jump $r10 ; Jump to decompresser
-+ nop
-+
-+copy_from_ram:
-+ add.d $r13, $r11 ; mem offs + src offs -> src addr
-+1:
-+ move.d [$r11+], $r0 ; read source
-+ subq 4, $r12 ; 4 bytes at a time
-+ bne 1b ; loop until done
-+ move.d $r0, [$r10+] ; write dest (DELAY SLOT)
-+ jump copy_complete ; jump to internal RAM
-+ nop ; delay slot
-+
-+copy_complete:
-+ SAY 5
-+
-+#if FLASH_LEDS_INSTEAD_OF_BOOT
-+
-+flash:
-+
-+ ;; led test
-+
-+ moveq 0, $r1 ; led binary counter
-+1:
-+ or.d 31, $r9
-+ xor $r1, $r9
-+ move.d $r9, [$r8]
-+ addq 1, $r1
-+
-+ move.d 100000000, $r2 ; delay loop (100e6 => 1s)
-+2:
-+ bne 2b
-+ subq 1, $r2
-+
-+ ba 1b ; loop forever
- nop
-+#endif
-
--copy_complete:
-- move.d 0x38000000 + CONFIG_ETRAX_PTABLE_SECTOR, $r10
-- jump $r10 ; Jump to decompresser
-+
-+#if SERIAL_DUMP
-+ ;; dump memory to serial port
-+
-+#if (SERIAL_PORT == 1)
-+ ;; set up serial-1 pins
-+ move.d REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1
-+ move.d [$r1], $r0
-+ or.d REG_STATE(pinmux, rw_hwprot, ser1, yes), $r0
-+ move.d $r0, [$r1]
-+#endif
-+
-+ ;; rw_xoff: chr and automatic = 0
-+ move.d REG_ADDR(ser, regi_serial, rw_xoff), $r1
-+ move.d [$r1], $r0
-+ and.d ~(REG_MASK(ser, rw_xoff, automatic) | REG_MASK(ser, rw_xoff, chr)), $r0
-+ move.d $r0, [$r1]
-+
-+ ;; tr control
-+ move.d REG_ADDR(ser, regi_serial, rw_tr_ctrl), $r1
-+ move.d [$r1], $r0
-+ and.d ~(REG_MASK(ser, rw_tr_ctrl, base_freq) | REG_MASK(ser, rw_tr_ctrl, stop_bits)), $r0
-+ or.d REG_STATE(ser, rw_tr_ctrl, stop_bits, bits2) | REG_STATE(ser, rw_tr_ctrl, base_freq, f29_493) | REG_STATE(ser, rw_tr_ctrl, en, yes), $r0
-+ move.d $r0, [$r1]
-+
-+ ;; tr baud
-+ move.d REG_ADDR(ser, regi_serial, rw_tr_baud_div), $r1
-+ move.d [$r1], $r0
-+ move.w (29493000 / 8) / 115200, $r0
-+ move.d $r0, [$r1]
-+
-+#if SERIAL_RECEIVE
-+ ;; rec control
-+ move.d REG_ADDR(ser, regi_serial, rw_rec_ctrl), $r1
-+ move.d [$r1], $r0
-+ and.d ~(REG_MASK(ser, rw_rec_ctrl, base_freq)), $r0
-+ or.d REG_STATE(ser, rw_rec_ctrl, base_freq, f29_493) | REG_STATE(ser, rw_tr_ctrl, en, yes), $r0
-+ move.d $r0, [$r1]
-+
-+ ;; rec baud
-+ move.d REG_ADDR(ser, regi_serial, rw_rec_baud_div), $r1
-+ move.d [$r1], $r0
-+ move.w (29493000 / 8) / 115200, $r0
-+ move.d $r0, [$r1]
-+#endif
-+
-+ ;; dump memory
-+
-+ move.d 0x38000000, $r5 ; pointer
-+
-+ bsr serout
-+ moveq 13, $r3
-+ bsr serout
-+ moveq 10, $r3
-+ bsr serout
-+ moveq 10, $r3
-+
-+1:
-+ movu.b [$r5+], $r3 ; get value
-+ move.d $r3, $r6 ; save
-+
-+ bsr nybbleout
-+ lsrq 4, $r3 ; high nybble (delay slot)
-+
-+ move.d $r6, $r3 ; restore
-+ bsr nybbleout
-+ andq 15, $r3 ; delay slot
-+
-+ movu.b 32, $r3
-+ bsr serout
- nop
-+
-+ move.d $r5, $r3
-+ andq 15, $r3
-+ bne 1b
-+ nop
-+
-+ bsr serout
-+ moveq 13, $r3 ; delay slot
-+ bsr serout
-+ moveq 10, $r3 ; delay slot
-+
-+ ba 1b ; loop forever
-+ nop
-+
-+nybbleout:
-+ cmpq 10, $r3
-+ blo 1f
-+ addq 48, $r3 ; delay slot
-+ addq 7, $r3
-+1:
-+serout:
-+ move.d REG_ADDR(ser, regi_serial, rs_stat_din), $r1
-+ move.d REG_ADDR(ser, regi_serial, rw_dout), $r2
-+2:
-+ move.d [$r1], $r4
-+ btstq REG_BIT(ser, rs_stat_din, tr_rdy), $r4
-+ bpl 2b
-+ nop
-+ ret
-+ move.d $r3, [$r2] ; delay slot
-+
-+#endif
-+
-+;; Init DRAM
-+
-+#include "../../lib/dram_init.S"
-+ move.d RAM_INIT_MAGIC, $r8 ; tell kernel boot loader dram init'd
-+ move.d NAND_BOOT_MAGIC, $r12 ; booted from NAND flash
-+
-+;; TODO: Clear .bss (not needed yet because size of .bss is zero)
-+;; TODO: Change .ld script so that BSS is in DRAM?
-+
-+;; Ok, time to do something. Continue with boot loader in C.
-+;; Must set up minimal C environment first though.
-+
-+ move.d 0x38020000, $sp ; stack pointer at top of internal RAM
-+
-+ move.d bootload, $r10
-+ jump $r10 ; Jump to boot loader
-+ nop
-+
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.c 2006-11-03 11:35:52.000000000 +0100
-@@ -0,0 +1,243 @@
-+/*
-+ * lib.c
-+ * Small practical functions for boot loader
-+ * malloc/free
-+ * memcpy/memset
-+ * writeb/writew/readb/readw
-+ * putc/puts/putnybble/putx
-+ * error/error2/BUG
-+ * serial_init
-+ *
-+ * $Id: lib.c,v 1.4 2006/11/03 10:35:52 pkj Exp $
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/reg_map.h>
-+#include <asm/arch/hwregs/ser_defs.h>
-+#include <asm/arch/hwregs/pinmux_defs.h>
-+
-+#include "lib.h"
-+
-+/* the "heap" is put directly after BSS ends, at _end */
-+
-+extern int _end;
-+static long free_mem_ptr = (long)&_end;
-+
-+void *malloc(int size)
-+{
-+ void *p;
-+
-+ if (size <0) error("Malloc error");
-+
-+ free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */
-+
-+ p = (void *)free_mem_ptr;
-+ free_mem_ptr += size;
-+
-+ return p;
-+}
-+
-+void free(void *where)
-+{ /* Don't care */
-+}
-+
-+/* I/O */
-+
-+unsigned char readb(const volatile void *addr)
-+{
-+ return *(volatile unsigned char *) addr;
-+}
-+
-+unsigned short readw(const volatile void *addr)
-+{
-+ return *(volatile unsigned short *) addr;
-+}
-+
-+void writeb(unsigned char b, volatile void *addr)
-+{
-+ *(volatile unsigned char *) addr = b;
-+}
-+
-+void writew(unsigned short b, volatile void *addr)
-+{
-+ *(volatile unsigned short *) addr = b;
-+}
-+
-+/* info and error messages to serial console */
-+
-+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-+static inline void
-+serout(const char c, reg_scope_instances regi_ser)
-+{
-+ reg_ser_rs_stat_din rs;
-+ reg_ser_rw_dout dout = {.data = c};
-+
-+ do {
-+ rs = REG_RD(ser, regi_ser, rs_stat_din);
-+ }
-+ while (!rs.tr_rdy);/* Wait for tranceiver. */
-+
-+ REG_WR(ser, regi_ser, rw_dout, dout);
-+}
-+
-+
-+void
-+putc(const char c)
-+{
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ serout(c, regi_ser0);
-+#endif
-+#ifdef CONFIG_ETRAX_DEBUG_PORT1
-+ serout(c, regi_ser1);
-+#endif
-+#ifdef CONFIG_ETRAX_DEBUG_PORT2
-+ serout(c, regi_ser2);
-+#endif
-+#ifdef CONFIG_ETRAX_DEBUG_PORT3
-+ serout(c, regi_ser3);
-+#endif
-+}
-+
-+
-+void
-+puts(const char *s)
-+{
-+ while (*s)
-+ putc(*s++);
-+}
-+
-+void
-+putnybble(int n)
-+{
-+ putc("0123456789abcdef"[n & 15]);
-+}
-+
-+void
-+putx(int x)
-+{
-+ int i;
-+
-+ puts("0x");
-+ for (i = 7; i >= 0; i--)
-+ putnybble(x >> 4*i);
-+}
-+
-+void
-+putnl()
-+{
-+ puts("\r\n");
-+}
-+
-+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
-+
-+void*
-+memset(void* s, int c, size_t n)
-+{
-+ int i;
-+ char *ss = (char*)s;
-+
-+ for (i=0;i<n;i++) ss[i] = c;
-+}
-+
-+void*
-+memcpy(void* __dest, __const void* __src,
-+ size_t __n)
-+{
-+ int i;
-+ char *d = (char *)__dest, *s = (char *)__src;
-+
-+ for (i=0;i<__n;i++) d[i] = s[i];
-+}
-+
-+void
-+error(const char *x)
-+{
-+ puts("\r\n\n");
-+ puts(x);
-+ puts("\r\n\n -- System halted\n");
-+
-+ while(1); /* Halt */
-+}
-+
-+void
-+error2(const char *x, int y, const char *z)
-+{
-+ puts("\r\n\n");
-+ puts(x);
-+ putc(':');
-+ putx(y);
-+ putc(':');
-+ puts(z);
-+ puts("\r\n\n -- System halted\n");
-+
-+ while(1); /* Halt */
-+}
-+
-+static inline void
-+serial_setup(reg_scope_instances regi_ser)
-+{
-+ reg_ser_rw_xoff xoff;
-+ reg_ser_rw_tr_ctrl tr_ctrl;
-+ reg_ser_rw_rec_ctrl rec_ctrl;
-+ reg_ser_rw_tr_baud_div tr_baud;
-+ reg_ser_rw_rec_baud_div rec_baud;
-+
-+ /* Turn off XOFF. */
-+ xoff = REG_RD(ser, regi_ser, rw_xoff);
-+
-+ xoff.chr = 0;
-+ xoff.automatic = regk_ser_no;
-+
-+ REG_WR(ser, regi_ser, rw_xoff, xoff);
-+
-+ /* Set baudrate and stopbits. */
-+ tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
-+ rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
-+ tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
-+ rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
-+
-+ tr_ctrl.stop_bits = 1; /* 2 stop bits. */
-+ tr_ctrl.en = 1; /* enable transmitter */
-+ rec_ctrl.en = 1; /* enabler receiver */
-+
-+ /*
-+ * The baudrate setup used to be a bit fishy, but now transmitter and
-+ * receiver are both set to the intended baud rate, 115200.
-+ * The magic value is 29.493 MHz.
-+ */
-+ tr_ctrl.base_freq = regk_ser_f29_493;
-+ rec_ctrl.base_freq = regk_ser_f29_493;
-+ tr_baud.div = (29493000 / 8) / 115200;
-+ rec_baud.div = (29493000 / 8) / 115200;
-+
-+ REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
-+ REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
-+ REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
-+ REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
-+}
-+
-+void
-+serial_init()
-+{
-+ reg_pinmux_rw_hwprot hwprot;
-+
-+ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-+#ifdef CONFIG_ETRAX_DEBUG_PORT0
-+ serial_setup(regi_ser0);
-+#endif
-+#ifdef CONFIG_ETRAX_DEBUG_PORT1
-+ hwprot.ser1 = regk_pinmux_yes;
-+ serial_setup(regi_ser1);
-+#endif
-+#ifdef CONFIG_ETRAX_DEBUG_PORT2
-+ hwprot.ser2 = regk_pinmux_yes;
-+ serial_setup(regi_ser2);
-+#endif
-+#ifdef CONFIG_ETRAX_DEBUG_PORT3
-+ hwprot.ser3 = regk_pinmux_yes;
-+ serial_setup(regi_ser3);
-+#endif
-+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-+}
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/lib.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/lib.h 2006-11-03 11:35:52.000000000 +0100
-@@ -0,0 +1,56 @@
-+/*
-+ * lib.c
-+ * Small practical functions for boot loader
-+ * malloc/free
-+ * memset/memcpy
-+ * putc/puts/putnybble/putd
-+ * writeb/writew/readb/readw
-+ * error/error2/BUG
-+ * serial_init
-+ *
-+ * $Id: lib.h,v 1.3 2006/11/03 10:35:52 pkj Exp $
-+ *
-+ */
-+
-+#ifndef _LIB_H
-+#define _LIB_H
-+
-+#include <linux/types.h>
-+
-+/* nice stuff we need without having any library around */
-+
-+void* memset(void* s, int c, size_t n);
-+void* memcpy(void* __dest, __const void* __src,
-+ size_t __n);
-+
-+#define memzero(s, n) memset ((s), 0, (n))
-+
-+#undef BUG
-+#define BUG() error2("BUG in " __FILE__, __LINE__, __FUNCTION__)
-+
-+void *malloc(int size);
-+void free(void *where);
-+void error(const char *m);
-+void error2(const char *m, int l, const char *f);
-+void serial_init(void);
-+
-+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-+void putc(const char);
-+void puts(const char *);
-+void putnybble(int n);
-+void putx(int x);
-+void putnl();
-+#else
-+#define putc(ch)
-+#define puts(str)
-+#define putnybble(nyb)
-+#define putx(x)
-+#define putnl()
-+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
-+
-+unsigned char readb(const volatile void *addr);
-+unsigned short readw(const volatile void *addr);
-+void writeb(unsigned char b, volatile void *addr);
-+void writew(unsigned short b, volatile void *addr);
-+
-+#endif /* _LIB_H */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd-abi.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd-abi.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd-abi.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd-abi.h 2006-09-06 11:21:07.000000000 +0200
-@@ -0,0 +1,121 @@
-+/*
-+ * $Id: mtd-abi.h,v 1.1 2006/09/06 09:21:07 ricardw Exp $
-+ *
-+ * Portions of MTD ABI definition which are shared by kernel and user space
-+ */
-+
-+#ifndef __MTD_ABI_H__
-+#define __MTD_ABI_H__
-+
-+#ifndef __KERNEL__ /* Urgh. The whole point of splitting this out into
-+ separate files was to avoid #ifdef __KERNEL__ */
-+#define __user
-+#endif
-+
-+struct erase_info_user {
-+ uint32_t start;
-+ uint32_t length;
-+};
-+
-+struct mtd_oob_buf {
-+ uint32_t start;
-+ uint32_t length;
-+ unsigned char __user *ptr;
-+};
-+
-+#define MTD_ABSENT 0
-+#define MTD_RAM 1
-+#define MTD_ROM 2
-+#define MTD_NORFLASH 3
-+#define MTD_NANDFLASH 4
-+#define MTD_PEROM 5
-+#define MTD_DATAFLASH 6
-+#define MTD_OTHER 14
-+#define MTD_UNKNOWN 15
-+
-+#define MTD_CLEAR_BITS 1 // Bits can be cleared (flash)
-+#define MTD_SET_BITS 2 // Bits can be set
-+#define MTD_ERASEABLE 4 // Has an erase function
-+#define MTD_WRITEB_WRITEABLE 8 // Direct IO is possible
-+#define MTD_VOLATILE 16 // Set for RAMs
-+#define MTD_XIP 32 // eXecute-In-Place possible
-+#define MTD_OOB 64 // Out-of-band data (NAND flash)
-+#define MTD_ECC 128 // Device capable of automatic ECC
-+#define MTD_NO_VIRTBLOCKS 256 // Virtual blocks not allowed
-+#define MTD_PROGRAM_REGIONS 512 // Configurable Programming Regions
-+
-+// Some common devices / combinations of capabilities
-+#define MTD_CAP_ROM 0
-+#define MTD_CAP_RAM (MTD_CLEAR_BITS|MTD_SET_BITS|MTD_WRITEB_WRITEABLE)
-+#define MTD_CAP_NORFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE)
-+#define MTD_CAP_NANDFLASH (MTD_CLEAR_BITS|MTD_ERASEABLE|MTD_OOB)
-+#define MTD_WRITEABLE (MTD_CLEAR_BITS|MTD_SET_BITS)
-+
-+
-+// Types of automatic ECC/Checksum available
-+#define MTD_ECC_NONE 0 // No automatic ECC available
-+#define MTD_ECC_RS_DiskOnChip 1 // Automatic ECC on DiskOnChip
-+#define MTD_ECC_SW 2 // SW ECC for Toshiba & Samsung devices
-+
-+/* ECC byte placement */
-+#define MTD_NANDECC_OFF 0 // Switch off ECC (Not recommended)
-+#define MTD_NANDECC_PLACE 1 // Use the given placement in the structure (YAFFS1 legacy mode)
-+#define MTD_NANDECC_AUTOPLACE 2 // Use the default placement scheme
-+#define MTD_NANDECC_PLACEONLY 3 // Use the given placement in the structure (Do not store ecc result on read)
-+#define MTD_NANDECC_AUTOPL_USR 4 // Use the given autoplacement scheme rather than using the default
-+
-+/* OTP mode selection */
-+#define MTD_OTP_OFF 0
-+#define MTD_OTP_FACTORY 1
-+#define MTD_OTP_USER 2
-+
-+struct mtd_info_user {
-+ uint8_t type;
-+ uint32_t flags;
-+ uint32_t size; // Total size of the MTD
-+ uint32_t erasesize;
-+ uint32_t oobblock; // Size of OOB blocks (e.g. 512)
-+ uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
-+ uint32_t ecctype;
-+ uint32_t eccsize;
-+};
-+
-+struct region_info_user {
-+ uint32_t offset; /* At which this region starts,
-+ * from the beginning of the MTD */
-+ uint32_t erasesize; /* For this region */
-+ uint32_t numblocks; /* Number of blocks in this region */
-+ uint32_t regionindex;
-+};
-+
-+struct otp_info {
-+ uint32_t start;
-+ uint32_t length;
-+ uint32_t locked;
-+};
-+
-+#define MEMGETINFO _IOR('M', 1, struct mtd_info_user)
-+#define MEMERASE _IOW('M', 2, struct erase_info_user)
-+#define MEMWRITEOOB _IOWR('M', 3, struct mtd_oob_buf)
-+#define MEMREADOOB _IOWR('M', 4, struct mtd_oob_buf)
-+#define MEMLOCK _IOW('M', 5, struct erase_info_user)
-+#define MEMUNLOCK _IOW('M', 6, struct erase_info_user)
-+#define MEMGETREGIONCOUNT _IOR('M', 7, int)
-+#define MEMGETREGIONINFO _IOWR('M', 8, struct region_info_user)
-+#define MEMSETOOBSEL _IOW('M', 9, struct nand_oobinfo)
-+#define MEMGETOOBSEL _IOR('M', 10, struct nand_oobinfo)
-+#define MEMGETBADBLOCK _IOW('M', 11, loff_t)
-+#define MEMSETBADBLOCK _IOW('M', 12, loff_t)
-+#define OTPSELECT _IOR('M', 13, int)
-+#define OTPGETREGIONCOUNT _IOW('M', 14, int)
-+#define OTPGETREGIONINFO _IOW('M', 15, struct otp_info)
-+#define OTPLOCK _IOR('M', 16, struct otp_info)
-+
-+struct nand_oobinfo {
-+ uint32_t useecc;
-+ uint32_t eccbytes;
-+ uint32_t oobfree[8][2];
-+ uint32_t eccpos[32];
-+};
-+
-+#endif /* __MTD_ABI_H__ */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/mtd.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/mtd.h 2006-12-14 07:59:24.000000000 +0100
-@@ -0,0 +1,270 @@
-+/*
-+ * $Id: mtd.h,v 1.5 2006/12/14 06:59:24 ricardw Exp $
-+ *
-+ * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
-+ *
-+ * Released under GPL
-+ */
-+
-+#ifndef __MTD_MTD_H__
-+#define __MTD_MTD_H__
-+
-+#ifndef __KERNEL__
-+#error This is a kernel header. Perhaps include mtd-user.h instead?
-+#endif
-+
-+/* only include absolutely necessary linux headers which will not change
-+ * significantly
-+ */
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+
-+#if 0
-+#include <linux/module.h>
-+#include <linux/uio.h>
-+#include <linux/notifier.h>
-+
-+#include <linux/mtd/compatmac.h>
-+#include <mtd/mtd-abi.h>
-+#endif
-+
-+#include "mtd-abi.h"
-+
-+/* local config, we don't want linux/config.h here */
-+/* any undef/define pairs here avoid warnings due to linux autoconf includes */
-+#undef CONFIG_MTD_PARTITIONS
-+#undef CONFIG_MTD_DEBUG
-+#undef CONFIG_MTD_NAND_VERIFY_WRITE
-+#define CONFIG_MTD_NAND_VERIFY_WRITE
-+
-+/* our MTD config */
-+
-+#define NAND_BBT_SUPPORT 0
-+#define NAND_WRITE_SUPPORT 0
-+#define NAND_ERASE_SUPPORT 0
-+#define NAND_MULTICHIP_SUPPORT 0
-+#define NAND_HWECC_SUPPORT 0
-+#define NAND_KVEC_SUPPORT 0
-+
-+
-+#define MTD_CHAR_MAJOR 90
-+#define MTD_BLOCK_MAJOR 31
-+#define MAX_MTD_DEVICES 16
-+
-+#define MTD_ERASE_PENDING 0x01
-+#define MTD_ERASING 0x02
-+#define MTD_ERASE_SUSPEND 0x04
-+#define MTD_ERASE_DONE 0x08
-+#define MTD_ERASE_FAILED 0x10
-+
-+/* If the erase fails, fail_addr might indicate exactly which block failed. If
-+ fail_addr = 0xffffffff, the failure was not at the device level or was not
-+ specific to any particular block. */
-+struct erase_info {
-+ struct mtd_info *mtd;
-+ u_int32_t addr;
-+ u_int32_t len;
-+ u_int32_t fail_addr;
-+ u_long time;
-+ u_long retries;
-+ u_int dev;
-+ u_int cell;
-+ void (*callback) (struct erase_info *self);
-+ u_long priv;
-+ u_char state;
-+ struct erase_info *next;
-+};
-+
-+struct mtd_erase_region_info {
-+ u_int32_t offset; /* At which this region starts, from the beginning of the MTD */
-+ u_int32_t erasesize; /* For this region */
-+ u_int32_t numblocks; /* Number of blocks of erasesize in this region */
-+};
-+
-+struct mtd_info {
-+ u_char type;
-+ u_int32_t flags;
-+ u_int32_t size; // Total size of the MTD
-+
-+ /* "Major" erase size for the device. Naïve users may take this
-+ * to be the only erase size available, or may use the more detailed
-+ * information below if they desire
-+ */
-+ u_int32_t erasesize;
-+
-+ u_int32_t oobblock; // Size of OOB blocks (e.g. 512)
-+ u_int32_t oobsize; // Amount of OOB data per block (e.g. 16)
-+ u_int32_t ecctype;
-+ u_int32_t eccsize;
-+
-+ /*
-+ * Reuse some of the above unused fields in the case of NOR flash
-+ * with configurable programming regions to avoid modifying the
-+ * user visible structure layout/size. Only valid when the
-+ * MTD_PROGRAM_REGIONS flag is set.
-+ * (Maybe we should have an union for those?)
-+ */
-+#define MTD_PROGREGION_SIZE(mtd) (mtd)->oobblock
-+#define MTD_PROGREGION_CTRLMODE_VALID(mtd) (mtd)->oobsize
-+#define MTD_PROGREGION_CTRLMODE_INVALID(mtd) (mtd)->ecctype
-+
-+ // Kernel-only stuff starts here.
-+ char *name;
-+ int index;
-+
-+ // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
-+ struct nand_oobinfo oobinfo;
-+ u_int32_t oobavail; // Number of bytes in OOB area available for fs
-+
-+ /* Data for variable erase regions. If numeraseregions is zero,
-+ * it means that the whole device has erasesize as given above.
-+ */
-+ int numeraseregions;
-+ struct mtd_erase_region_info *eraseregions;
-+
-+ /* This really shouldn't be here. It can go away in 2.5 */
-+ u_int32_t bank_size;
-+
-+ int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
-+
-+ /* This stuff for eXecute-In-Place */
-+ int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
-+
-+ /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
-+ void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
-+
-+
-+ int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-+ int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
-+
-+ int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+ int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+
-+ int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-+ int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
-+
-+ /*
-+ * Methods to access the protection register area, present in some
-+ * flash devices. The user data is one time programmable but the
-+ * factory data is read only.
-+ */
-+ int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
-+ int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-+ int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
-+ int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-+ int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-+ int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
-+
-+#if NAND_KVEC_SUPPORT
-+ /* kvec-based read/write methods. We need these especially for NAND flash,
-+ with its limited number of write cycles per erase.
-+ NB: The 'count' parameter is the number of _vectors_, each of
-+ which contains an (ofs, len) tuple.
-+ */
-+ int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
-+ int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
-+ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+ int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
-+ int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
-+ size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+#endif
-+
-+ /* Sync */
-+ void (*sync) (struct mtd_info *mtd);
-+
-+ /* Chip-supported device locking */
-+ int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
-+ int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
-+
-+ /* Power Management functions */
-+ int (*suspend) (struct mtd_info *mtd);
-+ void (*resume) (struct mtd_info *mtd);
-+
-+ /* Bad block management functions */
-+ int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
-+ int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
-+
-+#if 0 /* don't know what this is for */
-+ struct notifier_block reboot_notifier; /* default mode before reboot */
-+#endif
-+
-+ void *priv;
-+
-+ struct module *owner;
-+ int usecount;
-+};
-+
-+#if 0 /* don't need these */
-+ /* Kernel-side ioctl definitions */
-+
-+extern int add_mtd_device(struct mtd_info *mtd);
-+extern int del_mtd_device (struct mtd_info *mtd);
-+
-+extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
-+
-+extern void put_mtd_device(struct mtd_info *mtd);
-+
-+
-+struct mtd_notifier {
-+ void (*add)(struct mtd_info *mtd);
-+ void (*remove)(struct mtd_info *mtd);
-+ struct list_head list;
-+};
-+
-+
-+extern void register_mtd_user (struct mtd_notifier *new);
-+extern int unregister_mtd_user (struct mtd_notifier *old);
-+#endif
-+
-+#if NAND_KVEC_SUPPORT
-+int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t *retlen);
-+
-+int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
-+ unsigned long count, loff_t from, size_t *retlen);
-+#endif
-+
-+#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
-+#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
-+#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
-+#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
-+#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
-+#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
-+#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
-+#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
-+#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
-+#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
-+#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
-+#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
-+
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+void mtd_erase_callback(struct erase_info *instr);
-+#else
-+static inline void mtd_erase_callback(struct erase_info *instr)
-+{
-+ if (instr->callback)
-+ instr->callback(instr);
-+}
-+#endif
-+
-+/*
-+ * Debugging macro and defines
-+ */
-+#define MTD_DEBUG_LEVEL0 (0) /* Quiet */
-+#define MTD_DEBUG_LEVEL1 (1) /* Audible */
-+#define MTD_DEBUG_LEVEL2 (2) /* Loud */
-+#define MTD_DEBUG_LEVEL3 (3) /* Noisy */
-+
-+#ifdef CONFIG_MTD_DEBUG
-+#define DEBUG(n, args...) \
-+ do { \
-+ if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
-+ printk(KERN_INFO args); \
-+ } while(0)
-+#else /* CONFIG_MTD_DEBUG */
-+#define DEBUG(n, args...) do { } while(0)
-+
-+#endif /* CONFIG_MTD_DEBUG */
-+
-+#endif /* __MTD_MTD_H__ */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand.h 2006-11-03 11:35:52.000000000 +0100
-@@ -0,0 +1,521 @@
-+/*
-+ * linux/include/linux/mtd/nand.h
-+ *
-+ * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
-+ * Steven J. Hill <sjhill@realitydiluted.com>
-+ * Thomas Gleixner <tglx@linutronix.de>
-+ *
-+ * $Id: nand.h,v 1.4 2006/11/03 10:35:52 pkj Exp $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Info:
-+ * Contains standard defines and IDs for NAND flash devices
-+ *
-+ * Changelog:
-+ * 01-31-2000 DMW Created
-+ * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers
-+ * so it can be used by other NAND flash device
-+ * drivers. I also changed the copyright since none
-+ * of the original contents of this file are specific
-+ * to DoC devices. David can whack me with a baseball
-+ * bat later if I did something naughty.
-+ * 10-11-2000 SJH Added private NAND flash structure for driver
-+ * 10-24-2000 SJH Added prototype for 'nand_scan' function
-+ * 10-29-2001 TG changed nand_chip structure to support
-+ * hardwarespecific function for accessing control lines
-+ * 02-21-2002 TG added support for different read/write adress and
-+ * ready/busy line access function
-+ * 02-26-2002 TG added chip_delay to nand_chip structure to optimize
-+ * command delay times for different chips
-+ * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate
-+ * defines in jffs2/wbuf.c
-+ * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if
-+ * CONFIG_MTD_NAND_ECC_JFFS2 is not set
-+ * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC
-+ *
-+ * 08-29-2002 tglx nand_chip structure: data_poi for selecting
-+ * internal / fs-driver buffer
-+ * support for 6byte/512byte hardware ECC
-+ * read_ecc, write_ecc extended for different oob-layout
-+ * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
-+ * NAND_YAFFS_OOB
-+ * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL
-+ * Split manufacturer and device ID structures
-+ *
-+ * 02-08-2004 tglx added option field to nand structure for chip anomalities
-+ * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id
-+ * update of nand_chip structure description
-+ * 01-17-2005 dmarlin added extended commands for AG-AND device and added option
-+ * for BBT_AUTO_REFRESH.
-+ * 01-20-2005 dmarlin added optional pointer to hardware specific callback for
-+ * extra error status checks.
-+ */
-+#ifndef __LINUX_MTD_NAND_H
-+#define __LINUX_MTD_NAND_H
-+
-+#if 0 /* avoid these as much as possible */
-+#include <linux/wait.h>
-+#include <linux/spinlock.h>
-+#include <linux/mtd/mtd.h>
-+#endif
-+
-+#include "mtd.h" /* local */
-+
-+#include <linux/kernel.h> /* we do need this though ... */
-+
-+struct mtd_info;
-+/* Scan and identify a NAND device */
-+extern int nand_scan (struct mtd_info *mtd, int max_chips);
-+/* Free resources held by the NAND device */
-+extern void nand_release (struct mtd_info *mtd);
-+
-+/* Read raw data from the device without ECC */
-+extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
-+
-+
-+/* The maximum number of NAND chips in an array */
-+#define NAND_MAX_CHIPS 8
-+
-+/* This constant declares the max. oobsize / page, which
-+ * is supported now. If you add a chip with bigger oobsize/page
-+ * adjust this accordingly.
-+ */
-+#define NAND_MAX_OOBSIZE 64
-+
-+/*
-+ * Constants for hardware specific CLE/ALE/NCE function
-+*/
-+/* Select the chip by setting nCE to low */
-+#define NAND_CTL_SETNCE 1
-+/* Deselect the chip by setting nCE to high */
-+#define NAND_CTL_CLRNCE 2
-+/* Select the command latch by setting CLE to high */
-+#define NAND_CTL_SETCLE 3
-+/* Deselect the command latch by setting CLE to low */
-+#define NAND_CTL_CLRCLE 4
-+/* Select the address latch by setting ALE to high */
-+#define NAND_CTL_SETALE 5
-+/* Deselect the address latch by setting ALE to low */
-+#define NAND_CTL_CLRALE 6
-+/* Set write protection by setting WP to high. Not used! */
-+#define NAND_CTL_SETWP 7
-+/* Clear write protection by setting WP to low. Not used! */
-+#define NAND_CTL_CLRWP 8
-+
-+/*
-+ * Standard NAND flash commands
-+ */
-+#define NAND_CMD_READ0 0
-+#define NAND_CMD_READ1 1
-+#define NAND_CMD_PAGEPROG 0x10
-+#define NAND_CMD_READOOB 0x50
-+#define NAND_CMD_ERASE1 0x60
-+#define NAND_CMD_STATUS 0x70
-+#define NAND_CMD_STATUS_MULTI 0x71
-+#define NAND_CMD_SEQIN 0x80
-+#define NAND_CMD_READID 0x90
-+#define NAND_CMD_ERASE2 0xd0
-+#define NAND_CMD_RESET 0xff
-+
-+/* Extended commands for large page devices */
-+#define NAND_CMD_READSTART 0x30
-+#define NAND_CMD_CACHEDPROG 0x15
-+
-+/* Extended commands for AG-AND device */
-+/*
-+ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but
-+ * there is no way to distinguish that from NAND_CMD_READ0
-+ * until the remaining sequence of commands has been completed
-+ * so add a high order bit and mask it off in the command.
-+ */
-+#define NAND_CMD_DEPLETE1 0x100
-+#define NAND_CMD_DEPLETE2 0x38
-+#define NAND_CMD_STATUS_MULTI 0x71
-+#define NAND_CMD_STATUS_ERROR 0x72
-+/* multi-bank error status (banks 0-3) */
-+#define NAND_CMD_STATUS_ERROR0 0x73
-+#define NAND_CMD_STATUS_ERROR1 0x74
-+#define NAND_CMD_STATUS_ERROR2 0x75
-+#define NAND_CMD_STATUS_ERROR3 0x76
-+#define NAND_CMD_STATUS_RESET 0x7f
-+#define NAND_CMD_STATUS_CLEAR 0xff
-+
-+/* Status bits */
-+#define NAND_STATUS_FAIL 0x01
-+#define NAND_STATUS_FAIL_N1 0x02
-+#define NAND_STATUS_TRUE_READY 0x20
-+#define NAND_STATUS_READY 0x40
-+#define NAND_STATUS_WP 0x80
-+
-+/*
-+ * Constants for ECC_MODES
-+ */
-+
-+/* No ECC. Usage is not recommended ! */
-+#define NAND_ECC_NONE 0
-+/* Software ECC 3 byte ECC per 256 Byte data */
-+#define NAND_ECC_SOFT 1
-+/* Hardware ECC 3 byte ECC per 256 Byte data */
-+#define NAND_ECC_HW3_256 2
-+/* Hardware ECC 3 byte ECC per 512 Byte data */
-+#define NAND_ECC_HW3_512 3
-+/* Hardware ECC 3 byte ECC per 512 Byte data */
-+#define NAND_ECC_HW6_512 4
-+/* Hardware ECC 8 byte ECC per 512 Byte data */
-+#define NAND_ECC_HW8_512 6
-+/* Hardware ECC 12 byte ECC per 2048 Byte data */
-+#define NAND_ECC_HW12_2048 7
-+
-+/*
-+ * Constants for Hardware ECC
-+ */
-+/* Reset Hardware ECC for read */
-+#define NAND_ECC_READ 0
-+/* Reset Hardware ECC for write */
-+#define NAND_ECC_WRITE 1
-+/* Enable Hardware ECC before syndrom is read back from flash */
-+#define NAND_ECC_READSYN 2
-+
-+/* Bit mask for flags passed to do_nand_read_ecc */
-+#define NAND_GET_DEVICE 0x80
-+
-+
-+/* Option constants for bizarre disfunctionality and real
-+* features
-+*/
-+/* Chip can not auto increment pages */
-+#define NAND_NO_AUTOINCR 0x00000001
-+/* Buswitdh is 16 bit */
-+#define NAND_BUSWIDTH_16 0x00000002
-+/* Device supports partial programming without padding */
-+#define NAND_NO_PADDING 0x00000004
-+/* Chip has cache program function */
-+#define NAND_CACHEPRG 0x00000008
-+/* Chip has copy back function */
-+#define NAND_COPYBACK 0x00000010
-+/* AND Chip which has 4 banks and a confusing page / block
-+ * assignment. See Renesas datasheet for further information */
-+#define NAND_IS_AND 0x00000020
-+/* Chip has a array of 4 pages which can be read without
-+ * additional ready /busy waits */
-+#define NAND_4PAGE_ARRAY 0x00000040
-+/* Chip requires that BBT is periodically rewritten to prevent
-+ * bits from adjacent blocks from 'leaking' in altering data.
-+ * This happens with the Renesas AG-AND chips, possibly others. */
-+#define BBT_AUTO_REFRESH 0x00000080
-+
-+/* Options valid for Samsung large page devices */
-+#define NAND_SAMSUNG_LP_OPTIONS \
-+ (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
-+
-+/* Macros to identify the above */
-+#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
-+#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
-+#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
-+#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
-+
-+/* Mask to zero out the chip options, which come from the id table */
-+#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR)
-+
-+/* Non chip related options */
-+/* Use a flash based bad block table. This option is passed to the
-+ * default bad block table function. */
-+#define NAND_USE_FLASH_BBT 0x00010000
-+/* The hw ecc generator provides a syndrome instead a ecc value on read
-+ * This can only work if we have the ecc bytes directly behind the
-+ * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */
-+#define NAND_HWECC_SYNDROME 0x00020000
-+/* This option skips the bbt scan during initialization. */
-+#define NAND_SKIP_BBTSCAN 0x00040000
-+
-+/* Options set by nand scan */
-+/* Nand scan has allocated oob_buf */
-+#define NAND_OOBBUF_ALLOC 0x40000000
-+/* Nand scan has allocated data_buf */
-+#define NAND_DATABUF_ALLOC 0x80000000
-+
-+
-+/*
-+ * nand_state_t - chip states
-+ * Enumeration for NAND flash chip state
-+ */
-+typedef enum {
-+ FL_READY,
-+ FL_READING,
-+ FL_WRITING,
-+ FL_ERASING,
-+ FL_SYNCING,
-+ FL_CACHEDPRG,
-+ FL_PM_SUSPENDED,
-+} nand_state_t;
-+
-+/* Keep gcc happy */
-+struct nand_chip;
-+
-+/**
-+ * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
-+ * @lock: protection lock
-+ * @active: the mtd device which holds the controller currently
-+ * @wq: wait queue to sleep on if a NAND operation is in progress
-+ * used instead of the per chip wait queue when a hw controller is available
-+ */
-+#if NAND_HWECC_SUPPORT
-+struct nand_hw_control {
-+ spinlock_t lock;
-+ struct nand_chip *active;
-+ wait_queue_head_t wq;
-+};
-+#endif
-+
-+/**
-+ * struct nand_chip - NAND Private Flash Chip Data
-+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
-+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
-+ * @read_byte: [REPLACEABLE] read one byte from the chip
-+ * @write_byte: [REPLACEABLE] write one byte to the chip
-+ * @read_word: [REPLACEABLE] read one word from the chip
-+ * @write_word: [REPLACEABLE] write one word to the chip
-+ * @write_buf: [REPLACEABLE] write data from the buffer to the chip
-+ * @read_buf: [REPLACEABLE] read data from the chip into the buffer
-+ * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data
-+ * @select_chip: [REPLACEABLE] select chip nr
-+ * @block_bad: [REPLACEABLE] check, if the block is bad
-+ * @block_markbad: [REPLACEABLE] mark the block bad
-+ * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines
-+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
-+ * If set to NULL no access to ready/busy is available and the ready/busy information
-+ * is read from the chip status register
-+ * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip
-+ * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready
-+ * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware
-+ * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
-+ * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
-+ * be provided if a hardware ECC is available
-+ * @erase_cmd: [INTERN] erase command write function, selectable due to AND support
-+ * @scan_bbt: [REPLACEABLE] function to scan bad block table
-+ * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
-+ * @eccsize: [INTERN] databytes used per ecc-calculation
-+ * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step
-+ * @eccsteps: [INTERN] number of ecc calculation steps per page
-+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
-+ * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip
-+ * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress
-+ * @state: [INTERN] the current state of the NAND device
-+ * @page_shift: [INTERN] number of address bits in a page (column address bits)
-+ * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock
-+ * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
-+ * @chip_shift: [INTERN] number of address bits in one chip
-+ * @data_buf: [INTERN] internal buffer for one page + oob
-+ * @oob_buf: [INTERN] oob buffer for one eraseblock
-+ * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized
-+ * @data_poi: [INTERN] pointer to a data buffer
-+ * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
-+ * special functionality. See the defines for further explanation
-+ * @badblockpos: [INTERN] position of the bad block marker in the oob area
-+ * @numchips: [INTERN] number of physical chips
-+ * @chipsize: [INTERN] the size of one chip for multichip arrays
-+ * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1
-+ * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf
-+ * @autooob: [REPLACEABLE] the default (auto)placement scheme
-+ * @bbt: [INTERN] bad block table pointer
-+ * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup
-+ * @bbt_md: [REPLACEABLE] bad block table mirror descriptor
-+ * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan
-+ * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices
-+ * @priv: [OPTIONAL] pointer to private chip date
-+ * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks
-+ * (determine if errors are correctable)
-+ */
-+
-+struct nand_chip {
-+ void __iomem *IO_ADDR_R;
-+ void __iomem *IO_ADDR_W;
-+
-+ u_char (*read_byte)(struct mtd_info *mtd);
-+ void (*write_byte)(struct mtd_info *mtd, u_char byte);
-+ u16 (*read_word)(struct mtd_info *mtd);
-+ void (*write_word)(struct mtd_info *mtd, u16 word);
-+
-+ void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len);
-+ void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len);
-+ int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len);
-+ void (*select_chip)(struct mtd_info *mtd, int chip);
-+ int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
-+ int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-+ void (*hwcontrol)(struct mtd_info *mtd, int cmd);
-+ int (*dev_ready)(struct mtd_info *mtd);
-+ void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
-+ int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
-+ int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
-+ int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-+ void (*enable_hwecc)(struct mtd_info *mtd, int mode);
-+ void (*erase_cmd)(struct mtd_info *mtd, int page);
-+ int (*scan_bbt)(struct mtd_info *mtd);
-+ int eccmode;
-+ int eccsize;
-+ int eccbytes;
-+ int eccsteps;
-+ int chip_delay;
-+#if 0 /* no spinlocks or wait queues in boot loader */
-+ spinlock_t chip_lock;
-+ wait_queue_head_t wq;
-+#endif
-+ nand_state_t state;
-+ int page_shift;
-+ int phys_erase_shift;
-+ int bbt_erase_shift;
-+ int chip_shift;
-+ u_char *data_buf;
-+ u_char *oob_buf;
-+ int oobdirty;
-+ u_char *data_poi;
-+ unsigned int options;
-+ int badblockpos;
-+ int numchips;
-+ unsigned long chipsize;
-+ int pagemask;
-+ int pagebuf;
-+ struct nand_oobinfo *autooob;
-+ uint8_t *bbt;
-+ struct nand_bbt_descr *bbt_td;
-+ struct nand_bbt_descr *bbt_md;
-+ struct nand_bbt_descr *badblock_pattern;
-+ struct nand_hw_control *controller;
-+ void *priv;
-+ int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page);
-+};
-+
-+/*
-+ * NAND Flash Manufacturer ID Codes
-+ */
-+#define NAND_MFR_TOSHIBA 0x98
-+#define NAND_MFR_SAMSUNG 0xec
-+#define NAND_MFR_FUJITSU 0x04
-+#define NAND_MFR_NATIONAL 0x8f
-+#define NAND_MFR_RENESAS 0x07
-+#define NAND_MFR_STMICRO 0x20
-+#define NAND_MFR_HYNIX 0xad
-+
-+/**
-+ * struct nand_flash_dev - NAND Flash Device ID Structure
-+ *
-+ * @name: Identify the device type
-+ * @id: device ID code
-+ * @pagesize: Pagesize in bytes. Either 256 or 512 or 0
-+ * If the pagesize is 0, then the real pagesize
-+ * and the eraseize are determined from the
-+ * extended id bytes in the chip
-+ * @erasesize: Size of an erase block in the flash device.
-+ * @chipsize: Total chipsize in Mega Bytes
-+ * @options: Bitfield to store chip relevant options
-+ */
-+struct nand_flash_dev {
-+ char *name;
-+ int id;
-+ unsigned long pagesize;
-+ unsigned long chipsize;
-+ unsigned long erasesize;
-+ unsigned long options;
-+};
-+
-+/**
-+ * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
-+ * @name: Manufacturer name
-+ * @id: manufacturer ID code of device.
-+*/
-+struct nand_manufacturers {
-+ int id;
-+ char * name;
-+};
-+
-+extern struct nand_flash_dev nand_flash_ids[];
-+extern struct nand_manufacturers nand_manuf_ids[];
-+
-+/**
-+ * struct nand_bbt_descr - bad block table descriptor
-+ * @options: options for this descriptor
-+ * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE
-+ * when bbt is searched, then we store the found bbts pages here.
-+ * Its an array and supports up to 8 chips now
-+ * @offs: offset of the pattern in the oob area of the page
-+ * @veroffs: offset of the bbt version counter in the oob are of the page
-+ * @version: version read from the bbt page during scan
-+ * @len: length of the pattern, if 0 no pattern check is performed
-+ * @maxblocks: maximum number of blocks to search for a bbt. This number of
-+ * blocks is reserved at the end of the device where the tables are
-+ * written.
-+ * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
-+ * bad) block in the stored bbt
-+ * @pattern: pattern to identify bad block table or factory marked good /
-+ * bad blocks, can be NULL, if len = 0
-+ *
-+ * Descriptor for the bad block table marker and the descriptor for the
-+ * pattern which identifies good and bad blocks. The assumption is made
-+ * that the pattern and the version count are always located in the oob area
-+ * of the first block.
-+ */
-+struct nand_bbt_descr {
-+ int options;
-+ int pages[NAND_MAX_CHIPS];
-+ int offs;
-+ int veroffs;
-+ uint8_t version[NAND_MAX_CHIPS];
-+ int len;
-+ int maxblocks;
-+ int reserved_block_code;
-+ uint8_t *pattern;
-+};
-+
-+/* Options for the bad block table descriptors */
-+
-+/* The number of bits used per block in the bbt on the device */
-+#define NAND_BBT_NRBITS_MSK 0x0000000F
-+#define NAND_BBT_1BIT 0x00000001
-+#define NAND_BBT_2BIT 0x00000002
-+#define NAND_BBT_4BIT 0x00000004
-+#define NAND_BBT_8BIT 0x00000008
-+/* The bad block table is in the last good block of the device */
-+#define NAND_BBT_LASTBLOCK 0x00000010
-+/* The bbt is at the given page, else we must scan for the bbt */
-+#define NAND_BBT_ABSPAGE 0x00000020
-+/* The bbt is at the given page, else we must scan for the bbt */
-+#define NAND_BBT_SEARCH 0x00000040
-+/* bbt is stored per chip on multichip devices */
-+#define NAND_BBT_PERCHIP 0x00000080
-+/* bbt has a version counter at offset veroffs */
-+#define NAND_BBT_VERSION 0x00000100
-+/* Create a bbt if none axists */
-+#define NAND_BBT_CREATE 0x00000200
-+/* Search good / bad pattern through all pages of a block */
-+#define NAND_BBT_SCANALLPAGES 0x00000400
-+/* Scan block empty during good / bad block scan */
-+#define NAND_BBT_SCANEMPTY 0x00000800
-+/* Write bbt if neccecary */
-+#define NAND_BBT_WRITE 0x00001000
-+/* Read and write back block contents when writing bbt */
-+#define NAND_BBT_SAVECONTENT 0x00002000
-+/* Search good / bad pattern on the first and the second page */
-+#define NAND_BBT_SCAN2NDPAGE 0x00004000
-+
-+/* The maximum number of blocks to scan for a bbt */
-+#define NAND_BBT_SCAN_MAXBLOCKS 4
-+
-+extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
-+extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
-+extern int nand_default_bbt (struct mtd_info *mtd);
-+extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
-+extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
-+extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t * retlen, u_char * buf, u_char * oob_buf,
-+ struct nand_oobinfo *oobsel, int flags);
-+
-+/*
-+* Constants for oob configuration
-+*/
-+#define NAND_SMALL_BADBLOCK_POS 5
-+#define NAND_LARGE_BADBLOCK_POS 0
-+
-+#endif /* __LINUX_MTD_NAND_H */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_base.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_base.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_base.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_base.c 2006-11-10 09:55:58.000000000 +0100
-@@ -0,0 +1,2910 @@
-+/*
-+ * Snitched from drivers/mtd/nand_base.c
-+ * Modified to run outside Linux.
-+ * #if 0'd to remove non-essential functionality
-+ *
-+ * Overview:
-+ * This is the generic MTD driver for NAND flash devices. It should be
-+ * capable of working with almost all NAND chips currently available.
-+ * Basic support for AG-AND chips is provided.
-+ *
-+ * Additional technical information is available on
-+ * http://www.linux-mtd.infradead.org/tech/nand.html
-+ *
-+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
-+ * 2002 Thomas Gleixner (tglx@linutronix.de)
-+ *
-+ * 02-08-2004 tglx: support for strange chips, which cannot auto increment
-+ * pages on read / read_oob
-+ *
-+ * 03-17-2004 tglx: Check ready before auto increment check. Simon Bayes
-+ * pointed this out, as he marked an auto increment capable chip
-+ * as NOAUTOINCR in the board driver.
-+ * Make reads over block boundaries work too
-+ *
-+ * 04-14-2004 tglx: first working version for 2k page size chips
-+ *
-+ * 05-19-2004 tglx: Basic support for Renesas AG-AND chips
-+ *
-+ * 09-24-2004 tglx: add support for hardware controllers (e.g. ECC) shared
-+ * among multiple independend devices. Suggestions and initial patch
-+ * from Ben Dooks <ben-mtd@fluff.org>
-+ *
-+ * 12-05-2004 dmarlin: add workaround for Renesas AG-AND chips "disturb" issue.
-+ * Basically, any block not rewritten may lose data when surrounding blocks
-+ * are rewritten many times. JFFS2 ensures this doesn't happen for blocks
-+ * it uses, but the Bad Block Table(s) may not be rewritten. To ensure they
-+ * do not lose data, force them to be rewritten when some of the surrounding
-+ * blocks are erased. Rather than tracking a specific nearby block (which
-+ * could itself go bad), use a page address 'mask' to select several blocks
-+ * in the same area, and rewrite the BBT when any of them are erased.
-+ *
-+ * 01-03-2005 dmarlin: added support for the device recovery command sequence for Renesas
-+ * AG-AND chips. If there was a sudden loss of power during an erase operation,
-+ * a "device recovery" operation must be performed when power is restored
-+ * to ensure correct operation.
-+ *
-+ * 01-20-2005 dmarlin: added support for optional hardware specific callback routine to
-+ * perform extra error status checks on erase and write failures. This required
-+ * adding a wrapper function for nand_read_ecc.
-+ *
-+ * 08-20-2005 vwool: suspend/resume added
-+ *
-+ * Credits:
-+ * David Woodhouse for adding multichip support
-+ *
-+ * Aleph One Ltd. and Toby Churchill Ltd. for supporting the
-+ * rework for 2K page size chips
-+ *
-+ * TODO:
-+ * Enable cached programming for 2k page size chips
-+ * Check, if mtd->ecctype should be set to MTD_ECC_HW
-+ * if we have HW ecc support.
-+ * The AG-AND chips have nice features for speed improvement,
-+ * which are not supported yet. Read / program 4 pages in one go.
-+ *
-+ * $Id: nand_base.c,v 1.11 2006/11/10 08:55:58 ricardw Exp $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/errno.h>
-+#if 0
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#endif
-+
-+#include "mtd.h"
-+#include "nand.h"
-+#include "nand_ecc.h"
-+
-+#if 0
-+#include <linux/mtd/compatmac.h>
-+#include <linux/interrupt.h>
-+#include <linux/bitops.h>
-+#include <asm/io.h>
-+#endif
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#include <linux/mtd/partitions.h>
-+
-+#endif
-+
-+#include "lib.h"
-+
-+#define GPIO_SYNC 0
-+
-+#undef DEBUG /* from mtd.h */
-+#define DEBUG(n, args...) do { } while(0)
-+
-+#define D(x)
-+
-+/* Define default oob placement schemes for large and small page devices */
-+static struct nand_oobinfo nand_oob_8 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 3,
-+ .eccpos = {0, 1, 2},
-+ .oobfree = { {3, 2}, {6, 2} }
-+};
-+
-+static struct nand_oobinfo nand_oob_16 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 6,
-+ .eccpos = {0, 1, 2, 3, 6, 7},
-+ .oobfree = { {8, 8} }
-+};
-+
-+static struct nand_oobinfo nand_oob_64 = {
-+ .useecc = MTD_NANDECC_AUTOPLACE,
-+ .eccbytes = 24,
-+ .eccpos = {
-+ 40, 41, 42, 43, 44, 45, 46, 47,
-+ 48, 49, 50, 51, 52, 53, 54, 55,
-+ 56, 57, 58, 59, 60, 61, 62, 63},
-+ .oobfree = { {2, 38} }
-+};
-+
-+/* This is used for padding purposes in nand_write_oob */
-+#if NAND_WRITE_SUPPORT
-+static u_char ffchars[] = {
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-+};
-+#endif
-+
-+/*
-+ * NAND low-level MTD interface functions
-+ */
-+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
-+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
-+
-+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t * retlen, u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf);
-+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf);
-+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel);
-+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char *buf);
-+#if NAND_KVEC_SUPPORT
-+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t * retlen);
-+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs,
-+ unsigned long count, loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
-+#endif
-+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr);
-+static void nand_sync (struct mtd_info *mtd);
-+
-+/* Some internal functions */
-+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page, u_char *oob_buf,
-+ struct nand_oobinfo *oobsel, int mode);
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
-+ u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
-+#else
-+#define nand_verify_pages(...) (0)
-+#endif
-+
-+static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state);
-+
-+/**
-+ * nand_release_device - [GENERIC] release chip
-+ * @mtd: MTD device structure
-+ *
-+ * Deselect, release chip lock and wake up anyone waiting on the device
-+ */
-+static void nand_release_device (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ /* De-select the NAND device */
-+ this->select_chip(mtd, -1);
-+#if 0
-+
-+ if (this->controller) {
-+ /* Release the controller and the chip */
-+ spin_lock(&this->controller->lock);
-+ this->controller->active = NULL;
-+ this->state = FL_READY;
-+ wake_up(&this->controller->wq);
-+ spin_unlock(&this->controller->lock);
-+ } else {
-+ /* Release the chip */
-+ spin_lock(&this->chip_lock);
-+ this->state = FL_READY;
-+ wake_up(&this->wq);
-+ spin_unlock(&this->chip_lock);
-+ }
-+#endif
-+}
-+
-+/**
-+ * nand_read_byte - [DEFAULT] read one byte from the chip
-+ * @mtd: MTD device structure
-+ *
-+ * Default read function for 8bit buswith
-+ */
-+static u_char nand_read_byte(struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ return readb(this->IO_ADDR_R);
-+}
-+
-+/**
-+ * nand_write_byte - [DEFAULT] write one byte to the chip
-+ * @mtd: MTD device structure
-+ * @byte: pointer to data byte to write
-+ *
-+ * Default write function for 8it buswith
-+ */
-+static void nand_write_byte(struct mtd_info *mtd, u_char byte)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ writeb(byte, this->IO_ADDR_W);
-+
-+#if GPIO_SYNC
-+ /* Bus sync: Read from address we just wrote.
-+ * This generates no signal to the NAND flash, since only chip
-+ * select lines are pulled out to the chip, and read is not
-+ * gated with chip select for the write area.
-+ * Turns out this is (probably) the wrong way to do it; the
-+ * right way is to set up suitable wait states in the kernel
-+ * config (CONFIG_ETRAX_MEM_GRP3_CONFIG).
-+ */
-+ (void) readb(this->IO_ADDR_W); /* that's right, IO_ADDR_W */
-+#endif
-+}
-+
-+/**
-+ * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
-+ * @mtd: MTD device structure
-+ *
-+ * Default read function for 16bit buswith with
-+ * endianess conversion
-+ */
-+static u_char nand_read_byte16(struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ return (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
-+}
-+
-+/**
-+ * nand_write_byte16 - [DEFAULT] write one byte endianess aware to the chip
-+ * @mtd: MTD device structure
-+ * @byte: pointer to data byte to write
-+ *
-+ * Default write function for 16bit buswith with
-+ * endianess conversion
-+ */
-+static void nand_write_byte16(struct mtd_info *mtd, u_char byte)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
-+}
-+
-+/**
-+ * nand_read_word - [DEFAULT] read one word from the chip
-+ * @mtd: MTD device structure
-+ *
-+ * Default read function for 16bit buswith without
-+ * endianess conversion
-+ */
-+static u16 nand_read_word(struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ return readw(this->IO_ADDR_R);
-+}
-+
-+/**
-+ * nand_write_word - [DEFAULT] write one word to the chip
-+ * @mtd: MTD device structure
-+ * @word: data word to write
-+ *
-+ * Default write function for 16bit buswith without
-+ * endianess conversion
-+ */
-+static void nand_write_word(struct mtd_info *mtd, u16 word)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ writew(word, this->IO_ADDR_W);
-+}
-+
-+/**
-+ * nand_select_chip - [DEFAULT] control CE line
-+ * @mtd: MTD device structure
-+ * @chip: chipnumber to select, -1 for deselect
-+ *
-+ * Default select function for 1 chip devices.
-+ */
-+static void nand_select_chip(struct mtd_info *mtd, int chip)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ switch(chip) {
-+ case -1:
-+ this->hwcontrol(mtd, NAND_CTL_CLRNCE);
-+ break;
-+ case 0:
-+ this->hwcontrol(mtd, NAND_CTL_SETNCE);
-+ break;
-+
-+ default:
-+ BUG();
-+ }
-+}
-+
-+/**
-+ * nand_write_buf - [DEFAULT] write buffer to chip
-+ * @mtd: MTD device structure
-+ * @buf: data buffer
-+ * @len: number of bytes to write
-+ *
-+ * Default write function for 8bit buswith
-+ */
-+static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+ struct nand_chip *this = mtd->priv;
-+
-+ for (i=0; i<len; i++)
-+ writeb(buf[i], this->IO_ADDR_W);
-+}
-+
-+/**
-+ * nand_read_buf - [DEFAULT] read chip data into buffer
-+ * @mtd: MTD device structure
-+ * @buf: buffer to store date
-+ * @len: number of bytes to read
-+ *
-+ * Default read function for 8bit buswith
-+ */
-+static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+ int i;
-+ struct nand_chip *this = mtd->priv;
-+
-+ for (i=0; i<len; i++)
-+ buf[i] = readb(this->IO_ADDR_R);
-+}
-+
-+/**
-+ * nand_verify_buf - [DEFAULT] Verify chip data against buffer
-+ * @mtd: MTD device structure
-+ * @buf: buffer containing the data to compare
-+ * @len: number of bytes to compare
-+ *
-+ * Default verify function for 8bit buswith
-+ */
-+static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+ struct nand_chip *this = mtd->priv;
-+
-+ for (i=0; i<len; i++)
-+ if (buf[i] != readb(this->IO_ADDR_R))
-+ return -EFAULT;
-+
-+ return 0;
-+}
-+
-+/**
-+ * nand_write_buf16 - [DEFAULT] write buffer to chip
-+ * @mtd: MTD device structure
-+ * @buf: data buffer
-+ * @len: number of bytes to write
-+ *
-+ * Default write function for 16bit buswith
-+ */
-+static void nand_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+ struct nand_chip *this = mtd->priv;
-+ u16 *p = (u16 *) buf;
-+ len >>= 1;
-+
-+ for (i=0; i<len; i++)
-+ writew(p[i], this->IO_ADDR_W);
-+
-+}
-+
-+/**
-+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
-+ * @mtd: MTD device structure
-+ * @buf: buffer to store date
-+ * @len: number of bytes to read
-+ *
-+ * Default read function for 16bit buswith
-+ */
-+static void nand_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
-+{
-+ int i;
-+ struct nand_chip *this = mtd->priv;
-+ u16 *p = (u16 *) buf;
-+ len >>= 1;
-+
-+ for (i=0; i<len; i++)
-+ p[i] = readw(this->IO_ADDR_R);
-+}
-+
-+/**
-+ * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer
-+ * @mtd: MTD device structure
-+ * @buf: buffer containing the data to compare
-+ * @len: number of bytes to compare
-+ *
-+ * Default verify function for 16bit buswith
-+ */
-+static int nand_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
-+{
-+ int i;
-+ struct nand_chip *this = mtd->priv;
-+ u16 *p = (u16 *) buf;
-+ len >>= 1;
-+
-+ for (i=0; i<len; i++)
-+ if (p[i] != readw(this->IO_ADDR_R))
-+ return -EFAULT;
-+
-+ return 0;
-+}
-+
-+/**
-+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ * @getchip: 0, if the chip is already selected
-+ *
-+ * Check, if the block is bad.
-+ */
-+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+{
-+ int page, chipnr, res = 0;
-+ struct nand_chip *this = mtd->priv;
-+ u16 bad;
-+
-+ if (getchip) {
-+ page = (int)(ofs >> this->page_shift);
-+ chipnr = (int)(ofs >> this->chip_shift);
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd, FL_READING);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+ } else
-+ page = (int) ofs;
-+
-+ if (this->options & NAND_BUSWIDTH_16) {
-+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
-+ bad = cpu_to_le16(this->read_word(mtd));
-+ if (this->badblockpos & 0x1)
-+ bad >>= 8;
-+ if ((bad & 0xFF) != 0xff)
-+ res = 1;
-+ } else {
-+ this->cmdfunc (mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
-+ if (this->read_byte(mtd) != 0xff)
-+ res = 1;
-+ }
-+
-+ if (getchip) {
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+ }
-+
-+ return res;
-+}
-+
-+/**
-+ * nand_default_block_markbad - [DEFAULT] mark a block bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ *
-+ * This is the default implementation, which can be overridden by
-+ * a hardware specific driver.
-+*/
-+#if NAND_WRITE_SUPPORT
-+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ u_char buf[2] = {0, 0};
-+ size_t retlen;
-+ int block;
-+
-+ /* Get block number */
-+ block = ((int) ofs) >> this->bbt_erase_shift;
-+ if (this->bbt)
-+ this->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
-+
-+#if NAND_BBT_SUPPORT
-+ /* Do we have a flash based bad block table ? */
-+ if (this->options & NAND_USE_FLASH_BBT)
-+ return nand_update_bbt (mtd, ofs);
-+#endif
-+
-+ /* We write two bytes, so we dont have to mess with 16 bit access */
-+ ofs += mtd->oobsize + (this->badblockpos & ~0x01);
-+ return nand_write_oob (mtd, ofs , 2, &retlen, buf);
-+}
-+#endif
-+
-+/**
-+ * nand_check_wp - [GENERIC] check if the chip is write protected
-+ * @mtd: MTD device structure
-+ * Check, if the device is write protected
-+ *
-+ * The function expects, that the device is already selected
-+ */
-+#if NAND_WRITE_SUPPORT
-+static int nand_check_wp (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ /* Check the WP bit */
-+ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
-+ return (this->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
-+}
-+#endif
-+
-+/**
-+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset from device start
-+ * @getchip: 0, if the chip is already selected
-+ * @allowbbt: 1, if its allowed to access the bbt area
-+ *
-+ * Check, if the block is bad. Either by reading the bad block table or
-+ * calling of the scan function.
-+ */
-+static int nand_block_checkbad (struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (!this->bbt)
-+ return this->block_bad(mtd, ofs, getchip);
-+
-+#if NAND_BBT_SUPPORT
-+ /* Return info from the table */
-+ return nand_isbad_bbt (mtd, ofs, allowbbt);
-+#endif
-+ BUG(); /* should not happen */
-+}
-+
-+/*
-+ * Wait for the ready pin, after a command
-+ * The timeout is catched later.
-+ */
-+static void nand_wait_ready(struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+#if 0
-+ unsigned long timeo = jiffies + 2;
-+#endif
-+
-+ /* wait until command is processed or timeout occures */
-+ do {
-+ if (this->dev_ready(mtd))
-+ return;
-+#if 0
-+ touch_softlockup_watchdog();
-+ } while (time_before(jiffies, timeo));
-+#endif
-+ } while (1);
-+}
-+
-+/**
-+ * nand_command - [DEFAULT] Send command to NAND device
-+ * @mtd: MTD device structure
-+ * @command: the command to be sent
-+ * @column: the column address for this command, -1 if none
-+ * @page_addr: the page address for this command, -1 if none
-+ *
-+ * Send command to NAND device. This function is used for small page
-+ * devices (256/512 Bytes per page)
-+ */
-+static void nand_command (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-+{
-+ register struct nand_chip *this = mtd->priv;
-+
-+ /* Begin command latch cycle */
-+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
-+ /*
-+ * Write out the command to the device.
-+ */
-+ if (command == NAND_CMD_SEQIN) {
-+ int readcmd;
-+
-+ if (column >= mtd->oobblock) {
-+ /* OOB area */
-+ column -= mtd->oobblock;
-+ readcmd = NAND_CMD_READOOB;
-+ } else if (column < 256) {
-+ /* First 256 bytes --> READ0 */
-+ readcmd = NAND_CMD_READ0;
-+ } else {
-+ column -= 256;
-+ readcmd = NAND_CMD_READ1;
-+ }
-+ this->write_byte(mtd, readcmd);
-+ }
-+ this->write_byte(mtd, command);
-+
-+ /* Set ALE and clear CLE to start address cycle */
-+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-+
-+ if (column != -1 || page_addr != -1) {
-+ this->hwcontrol(mtd, NAND_CTL_SETALE);
-+
-+ /* Serially input address */
-+ if (column != -1) {
-+ /* Adjust columns for 16 bit buswidth */
-+ if (this->options & NAND_BUSWIDTH_16)
-+ column >>= 1;
-+ this->write_byte(mtd, column);
-+ }
-+ if (page_addr != -1) {
-+ this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
-+ this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
-+ /* One more address cycle for devices > 32MiB */
-+ if (this->chipsize > (32 << 20))
-+ this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0x0f));
-+ }
-+ /* Latch in address */
-+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
-+ }
-+
-+ /*
-+ * program and erase have their own busy handlers
-+ * status and sequential in needs no delay
-+ */
-+ switch (command) {
-+
-+ case NAND_CMD_PAGEPROG:
-+ case NAND_CMD_ERASE1:
-+ case NAND_CMD_ERASE2:
-+ case NAND_CMD_SEQIN:
-+ case NAND_CMD_STATUS:
-+ return;
-+
-+ case NAND_CMD_RESET:
-+ if (this->dev_ready)
-+ break;
-+ udelay(this->chip_delay);
-+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
-+ this->write_byte(mtd, NAND_CMD_STATUS);
-+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-+ while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
-+ return;
-+
-+ /* This applies to read commands */
-+ default:
-+ /*
-+ * If we don't have access to the busy pin, we apply the given
-+ * command delay
-+ */
-+ if (!this->dev_ready) {
-+ udelay (this->chip_delay);
-+ return;
-+ }
-+ }
-+ /* Apply this short delay always to ensure that we do wait tWB in
-+ * any case on any machine. */
-+ ndelay (100);
-+
-+ nand_wait_ready(mtd);
-+}
-+
-+/**
-+ * nand_command_lp - [DEFAULT] Send command to NAND large page device
-+ * @mtd: MTD device structure
-+ * @command: the command to be sent
-+ * @column: the column address for this command, -1 if none
-+ * @page_addr: the page address for this command, -1 if none
-+ *
-+ * Send command to NAND device. This is the version for the new large page devices
-+ * We dont have the seperate regions as we have in the small page devices.
-+ * We must emulate NAND_CMD_READOOB to keep the code compatible.
-+ *
-+ */
-+static void nand_command_lp (struct mtd_info *mtd, unsigned command, int column, int page_addr)
-+{
-+ register struct nand_chip *this = mtd->priv;
-+
-+ /* Emulate NAND_CMD_READOOB */
-+ if (command == NAND_CMD_READOOB) {
-+ column += mtd->oobblock;
-+ command = NAND_CMD_READ0;
-+ }
-+
-+
-+ /* Begin command latch cycle */
-+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
-+ /* Write out the command to the device. */
-+ this->write_byte(mtd, (command & 0xff));
-+ /* End command latch cycle */
-+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-+
-+ if (column != -1 || page_addr != -1) {
-+ this->hwcontrol(mtd, NAND_CTL_SETALE);
-+
-+ /* Serially input address */
-+ if (column != -1) {
-+ /* Adjust columns for 16 bit buswidth */
-+ if (this->options & NAND_BUSWIDTH_16)
-+ column >>= 1;
-+ this->write_byte(mtd, column & 0xff);
-+ this->write_byte(mtd, column >> 8);
-+ }
-+ if (page_addr != -1) {
-+ this->write_byte(mtd, (unsigned char) (page_addr & 0xff));
-+ this->write_byte(mtd, (unsigned char) ((page_addr >> 8) & 0xff));
-+ /* One more address cycle for devices > 128MiB */
-+ if (this->chipsize > (128 << 20))
-+ this->write_byte(mtd, (unsigned char) ((page_addr >> 16) & 0xff));
-+ }
-+ /* Latch in address */
-+ this->hwcontrol(mtd, NAND_CTL_CLRALE);
-+ }
-+
-+ /*
-+ * program and erase have their own busy handlers
-+ * status, sequential in, and deplete1 need no delay
-+ */
-+ switch (command) {
-+
-+ case NAND_CMD_CACHEDPROG:
-+ case NAND_CMD_PAGEPROG:
-+ case NAND_CMD_ERASE1:
-+ case NAND_CMD_ERASE2:
-+ case NAND_CMD_SEQIN:
-+ case NAND_CMD_STATUS:
-+ case NAND_CMD_DEPLETE1:
-+ return;
-+
-+ /*
-+ * read error status commands require only a short delay
-+ */
-+ case NAND_CMD_STATUS_ERROR:
-+ case NAND_CMD_STATUS_ERROR0:
-+ case NAND_CMD_STATUS_ERROR1:
-+ case NAND_CMD_STATUS_ERROR2:
-+ case NAND_CMD_STATUS_ERROR3:
-+ udelay(this->chip_delay);
-+ return;
-+
-+ case NAND_CMD_RESET:
-+ if (this->dev_ready)
-+ break;
-+ udelay(this->chip_delay);
-+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
-+ this->write_byte(mtd, NAND_CMD_STATUS);
-+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-+ while ( !(this->read_byte(mtd) & NAND_STATUS_READY));
-+ return;
-+
-+ case NAND_CMD_READ0:
-+ /* Begin command latch cycle */
-+ this->hwcontrol(mtd, NAND_CTL_SETCLE);
-+ /* Write out the start read command */
-+ this->write_byte(mtd, NAND_CMD_READSTART);
-+ /* End command latch cycle */
-+ this->hwcontrol(mtd, NAND_CTL_CLRCLE);
-+ /* Fall through into ready check */
-+
-+ /* This applies to read commands */
-+ default:
-+ /*
-+ * If we don't have access to the busy pin, we apply the given
-+ * command delay
-+ */
-+ if (!this->dev_ready) {
-+ udelay (this->chip_delay);
-+ return;
-+ }
-+ }
-+
-+ /* Apply this short delay always to ensure that we do wait tWB in
-+ * any case on any machine. */
-+ ndelay (100);
-+
-+ nand_wait_ready(mtd);
-+}
-+
-+/**
-+ * nand_get_device - [GENERIC] Get chip for selected access
-+ * @this: the nand chip descriptor
-+ * @mtd: MTD device structure
-+ * @new_state: the state which is requested
-+ *
-+ * Get the device and lock it for exclusive access
-+ */
-+static int nand_get_device (struct nand_chip *this, struct mtd_info *mtd, int new_state)
-+{
-+ this->state = new_state;
-+ return 0;
-+#if 0
-+ struct nand_chip *active;
-+ spinlock_t *lock;
-+ wait_queue_head_t *wq;
-+ DECLARE_WAITQUEUE (wait, current);
-+
-+ lock = (this->controller) ? &this->controller->lock : &this->chip_lock;
-+ wq = (this->controller) ? &this->controller->wq : &this->wq;
-+retry:
-+ active = this;
-+ spin_lock(lock);
-+
-+ /* Hardware controller shared among independend devices */
-+ if (this->controller) {
-+ if (this->controller->active)
-+ active = this->controller->active;
-+ else
-+ this->controller->active = this;
-+ }
-+ if (active == this && this->state == FL_READY) {
-+ this->state = new_state;
-+ spin_unlock(lock);
-+ return 0;
-+ }
-+ if (new_state == FL_PM_SUSPENDED) {
-+ spin_unlock(lock);
-+ return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
-+ }
-+ set_current_state(TASK_UNINTERRUPTIBLE);
-+ add_wait_queue(wq, &wait);
-+ spin_unlock(lock);
-+ schedule();
-+ remove_wait_queue(wq, &wait);
-+ goto retry;
-+#endif
-+}
-+
-+/**
-+ * nand_wait - [DEFAULT] wait until the command is done
-+ * @mtd: MTD device structure
-+ * @this: NAND chip structure
-+ * @state: state to select the max. timeout value
-+ *
-+ * Wait for command done. This applies to erase and program only
-+ * Erase can take up to 400ms and program up to 20ms according to
-+ * general NAND and SmartMedia specs
-+ *
-+*/
-+static int nand_wait(struct mtd_info *mtd, struct nand_chip *this, int state)
-+{
-+
-+#if 0
-+ unsigned long timeo = jiffies;
-+#endif
-+ int status;
-+
-+#if 0
-+ if (state == FL_ERASING)
-+ timeo += (HZ * 400) / 1000;
-+ else
-+ timeo += (HZ * 20) / 1000;
-+#endif
-+
-+ /* Apply this short delay always to ensure that we do wait tWB in
-+ * any case on any machine. */
-+ ndelay (100);
-+
-+ if ((state == FL_ERASING) && (this->options & NAND_IS_AND))
-+ this->cmdfunc (mtd, NAND_CMD_STATUS_MULTI, -1, -1);
-+ else
-+ this->cmdfunc (mtd, NAND_CMD_STATUS, -1, -1);
-+
-+#if 0
-+ while (time_before(jiffies, timeo)) {
-+ /* Check, if we were interrupted */
-+ if (this->state != state)
-+ return 0;
-+#endif
-+ while (1) { /* wait indefinitely */
-+
-+ if (this->dev_ready) {
-+ if (this->dev_ready(mtd))
-+ break;
-+ } else {
-+ if (this->read_byte(mtd) & NAND_STATUS_READY)
-+ break;
-+ }
-+
-+#if 0
-+ cond_resched();
-+#endif
-+ }
-+ status = (int) this->read_byte(mtd);
-+ return status;
-+}
-+
-+/**
-+ * nand_write_page - [GENERIC] write one page
-+ * @mtd: MTD device structure
-+ * @this: NAND chip structure
-+ * @page: startpage inside the chip, must be called with (page & this->pagemask)
-+ * @oob_buf: out of band data buffer
-+ * @oobsel: out of band selecttion structre
-+ * @cached: 1 = enable cached programming if supported by chip
-+ *
-+ * Nand_page_program function is used for write and writev !
-+ * This function will always program a full page of data
-+ * If you call it with a non page aligned buffer, you're lost :)
-+ *
-+ * Cached programming is not supported yet.
-+ */
-+#if NAND_WRITE_SUPPORT
-+static int nand_write_page (struct mtd_info *mtd, struct nand_chip *this, int page,
-+ u_char *oob_buf, struct nand_oobinfo *oobsel, int cached)
-+{
-+ int i, status;
-+ u_char ecc_code[32];
-+ int eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+ int *oob_config = oobsel->eccpos;
-+ int datidx = 0, eccidx = 0, eccsteps = this->eccsteps;
-+ int eccbytes = 0;
-+
-+ /* FIXME: Enable cached programming */
-+ cached = 0;
-+
-+ /* Send command to begin auto page programming */
-+ this->cmdfunc (mtd, NAND_CMD_SEQIN, 0x00, page);
-+
-+ /* Write out complete page of data, take care of eccmode */
-+ switch (eccmode) {
-+ /* No ecc, write all */
-+ case NAND_ECC_NONE:
-+ puts ("Writing data without ECC to NAND-FLASH is not recommended\r\n");
-+ this->write_buf(mtd, this->data_poi, mtd->oobblock);
-+ break;
-+
-+ /* Software ecc 3/256, write all */
-+ case NAND_ECC_SOFT:
-+ for (; eccsteps; eccsteps--) {
-+ this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
-+ for (i = 0; i < 3; i++, eccidx++)
-+ oob_buf[oob_config[eccidx]] = ecc_code[i];
-+ datidx += this->eccsize;
-+ }
-+ this->write_buf(mtd, this->data_poi, mtd->oobblock);
-+ break;
-+ default:
-+ eccbytes = this->eccbytes;
-+ for (; eccsteps; eccsteps--) {
-+ /* enable hardware ecc logic for write */
-+ this->enable_hwecc(mtd, NAND_ECC_WRITE);
-+ this->write_buf(mtd, &this->data_poi[datidx], this->eccsize);
-+ this->calculate_ecc(mtd, &this->data_poi[datidx], ecc_code);
-+ for (i = 0; i < eccbytes; i++, eccidx++)
-+ oob_buf[oob_config[eccidx]] = ecc_code[i];
-+ /* If the hardware ecc provides syndromes then
-+ * the ecc code must be written immidiately after
-+ * the data bytes (words) */
-+ if (this->options & NAND_HWECC_SYNDROME)
-+ this->write_buf(mtd, ecc_code, eccbytes);
-+ datidx += this->eccsize;
-+ }
-+ break;
-+ }
-+
-+ /* Write out OOB data */
-+ if (this->options & NAND_HWECC_SYNDROME)
-+ this->write_buf(mtd, &oob_buf[oobsel->eccbytes], mtd->oobsize - oobsel->eccbytes);
-+ else
-+ this->write_buf(mtd, oob_buf, mtd->oobsize);
-+
-+ /* Send command to actually program the data */
-+ this->cmdfunc (mtd, cached ? NAND_CMD_CACHEDPROG : NAND_CMD_PAGEPROG, -1, -1);
-+
-+ if (!cached) {
-+ /* call wait ready function */
-+ status = this->waitfunc (mtd, this, FL_WRITING);
-+
-+ /* See if operation failed and additional status checks are available */
-+ if ((status & NAND_STATUS_FAIL) && (this->errstat)) {
-+ status = this->errstat(mtd, this, FL_WRITING, status, page);
-+ }
-+
-+ /* See if device thinks it succeeded */
-+ if (status & NAND_STATUS_FAIL) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write, page 0x%08x, ", __FUNCTION__, page);
-+ return -EIO;
-+ }
-+ } else {
-+ /* FIXME: Implement cached programming ! */
-+ /* wait until cache is ready*/
-+ // status = this->waitfunc (mtd, this, FL_CACHEDRPG);
-+ }
-+ return 0;
-+}
-+#endif
-+
-+#if NAND_WRITE_SUPPORT
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+/**
-+ * nand_verify_pages - [GENERIC] verify the chip contents after a write
-+ * @mtd: MTD device structure
-+ * @this: NAND chip structure
-+ * @page: startpage inside the chip, must be called with (page & this->pagemask)
-+ * @numpages: number of pages to verify
-+ * @oob_buf: out of band data buffer
-+ * @oobsel: out of band selecttion structre
-+ * @chipnr: number of the current chip
-+ * @oobmode: 1 = full buffer verify, 0 = ecc only
-+ *
-+ * The NAND device assumes that it is always writing to a cleanly erased page.
-+ * Hence, it performs its internal write verification only on bits that
-+ * transitioned from 1 to 0. The device does NOT verify the whole page on a
-+ * byte by byte basis. It is possible that the page was not completely erased
-+ * or the page is becoming unusable due to wear. The read with ECC would catch
-+ * the error later when the ECC page check fails, but we would rather catch
-+ * it early in the page write stage. Better to write no data than invalid data.
-+ */
-+static int nand_verify_pages (struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
-+ u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode)
-+{
-+ int i, j, datidx = 0, oobofs = 0, res = -EIO;
-+ int eccsteps = this->eccsteps;
-+ int hweccbytes;
-+ u_char oobdata[64];
-+
-+ hweccbytes = (this->options & NAND_HWECC_SYNDROME) ? (oobsel->eccbytes / eccsteps) : 0;
-+
-+ /* Send command to read back the first page */
-+ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page);
-+
-+ for(;;) {
-+ for (j = 0; j < eccsteps; j++) {
-+ /* Loop through and verify the data */
-+ if (this->verify_buf(mtd, &this->data_poi[datidx], mtd->eccsize)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ goto out;
-+ }
-+ datidx += mtd->eccsize;
-+ /* Have we a hw generator layout ? */
-+ if (!hweccbytes)
-+ continue;
-+ if (this->verify_buf(mtd, &this->oob_buf[oobofs], hweccbytes)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ goto out;
-+ }
-+ oobofs += hweccbytes;
-+ }
-+
-+ /* check, if we must compare all data or if we just have to
-+ * compare the ecc bytes
-+ */
-+ if (oobmode) {
-+ if (this->verify_buf(mtd, &oob_buf[oobofs], mtd->oobsize - hweccbytes * eccsteps)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "%s: " "Failed write verify, page 0x%08x ", __FUNCTION__, page);
-+ goto out;
-+ }
-+ } else {
-+ /* Read always, else autoincrement fails */
-+ this->read_buf(mtd, oobdata, mtd->oobsize - hweccbytes * eccsteps);
-+
-+ if (oobsel->useecc != MTD_NANDECC_OFF && !hweccbytes) {
-+ int ecccnt = oobsel->eccbytes;
-+
-+ for (i = 0; i < ecccnt; i++) {
-+ int idx = oobsel->eccpos[i];
-+ if (oobdata[idx] != oob_buf[oobofs + idx] ) {
-+ DEBUG (MTD_DEBUG_LEVEL0,
-+ "%s: Failed ECC write "
-+ "verify, page 0x%08x, " "%6i bytes were succesful\n", __FUNCTION__, page, i);
-+ goto out;
-+ }
-+ }
-+ }
-+ }
-+ oobofs += mtd->oobsize - hweccbytes * eccsteps;
-+ page++;
-+ numpages--;
-+
-+ /* Apply delay or wait for ready/busy pin
-+ * Do this before the AUTOINCR check, so no problems
-+ * arise if a chip which does auto increment
-+ * is marked as NOAUTOINCR by the board driver.
-+ * Do this also before returning, so the chip is
-+ * ready for the next command.
-+ */
-+ if (!this->dev_ready)
-+ udelay (this->chip_delay);
-+ else
-+ nand_wait_ready(mtd);
-+
-+ /* All done, return happy */
-+ if (!numpages)
-+ return 0;
-+
-+
-+ /* Check, if the chip supports auto page increment */
-+ if (!NAND_CANAUTOINCR(this))
-+ this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
-+ }
-+ /*
-+ * Terminate the read command. We come here in case of an error
-+ * So we must issue a reset command.
-+ */
-+out:
-+ this->cmdfunc (mtd, NAND_CMD_RESET, -1, -1);
-+ return res;
-+}
-+#endif
-+#endif
-+
-+/**
-+ * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
-+ * @mtd: MTD device structure
-+ * @from: offset to read from
-+ * @len: number of bytes to read
-+ * @retlen: pointer to variable to store the number of read bytes
-+ * @buf: the databuffer to put data
-+ *
-+ * This function simply calls nand_do_read_ecc with oob buffer and oobsel = NULL
-+ * and flags = 0xff
-+ */
-+static int nand_read (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+ return nand_do_read_ecc (mtd, from, len, retlen, buf, NULL, &mtd->oobinfo, 0xff);
-+}
-+
-+
-+/**
-+ * nand_read_ecc - [MTD Interface] MTD compability function for nand_do_read_ecc
-+ * @mtd: MTD device structure
-+ * @from: offset to read from
-+ * @len: number of bytes to read
-+ * @retlen: pointer to variable to store the number of read bytes
-+ * @buf: the databuffer to put data
-+ * @oob_buf: filesystem supplied oob data buffer
-+ * @oobsel: oob selection structure
-+ *
-+ * This function simply calls nand_do_read_ecc with flags = 0xff
-+ */
-+static int nand_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t * retlen, u_char * buf, u_char * oob_buf, struct nand_oobinfo *oobsel)
-+{
-+ /* use userspace supplied oobinfo, if zero */
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+ return nand_do_read_ecc(mtd, from, len, retlen, buf, oob_buf, oobsel, 0xff);
-+}
-+
-+
-+/**
-+ * nand_do_read_ecc - [MTD Interface] Read data with ECC
-+ * @mtd: MTD device structure
-+ * @from: offset to read from
-+ * @len: number of bytes to read
-+ * @retlen: pointer to variable to store the number of read bytes
-+ * @buf: the databuffer to put data
-+ * @oob_buf: filesystem supplied oob data buffer (can be NULL)
-+ * @oobsel: oob selection structure
-+ * @flags: flag to indicate if nand_get_device/nand_release_device should be preformed
-+ * and how many corrected error bits are acceptable:
-+ * bits 0..7 - number of tolerable errors
-+ * bit 8 - 0 == do not get/release chip, 1 == get/release chip
-+ *
-+ * NAND read with ECC
-+ */
-+int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t * retlen, u_char * buf, u_char * oob_buf,
-+ struct nand_oobinfo *oobsel, int flags)
-+{
-+
-+ int i, j, col, realpage, page, end, ecc, chipnr, sndcmd = 1;
-+ int read = 0, oob = 0, ecc_status = 0, ecc_failed = 0;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *data_poi, *oob_data = oob_buf;
-+ u_char ecc_calc[32];
-+ u_char ecc_code[32];
-+ int eccmode, eccsteps;
-+ int *oob_config, datidx;
-+ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
-+ int eccbytes;
-+ int compareecc = 1;
-+ int oobreadlen;
-+
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_ecc: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+ D(
-+ puts ("nand_read_ecc: from = ");
-+ putx (from);
-+ puts (", len = ");
-+ putx(len);
-+ putnl();
-+ )
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: Attempt read beyond end of device\n");
-+ D(puts("nand_read_ecc: Attempt read beyond end of device\r\n"));
-+ *retlen = 0;
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ if (flags & NAND_GET_DEVICE)
-+ nand_get_device (this, mtd, FL_READING);
-+
-+ /* Autoplace of oob data ? Use the default placement scheme */
-+ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE)
-+ oobsel = this->autooob;
-+
-+ eccmode = oobsel->useecc ? this->eccmode : NAND_ECC_NONE;
-+ oob_config = oobsel->eccpos;
-+
-+ /* Select the NAND device */
-+ chipnr = (int)(from >> this->chip_shift);
-+ this->select_chip(mtd, chipnr);
-+
-+ /* First we calculate the starting page */
-+ realpage = (int) (from >> this->page_shift);
-+ page = realpage & this->pagemask;
-+
-+ /* Get raw starting column */
-+ col = from & (mtd->oobblock - 1);
-+
-+ end = mtd->oobblock;
-+ ecc = this->eccsize;
-+ eccbytes = this->eccbytes;
-+
-+ if ((eccmode == NAND_ECC_NONE) || (this->options & NAND_HWECC_SYNDROME))
-+ compareecc = 0;
-+
-+ oobreadlen = mtd->oobsize;
-+ if (this->options & NAND_HWECC_SYNDROME)
-+ oobreadlen -= oobsel->eccbytes;
-+
-+ /* Loop until all data read */
-+ while (read < len) {
-+
-+ int aligned = (!col && (len - read) >= end);
-+ /*
-+ * If the read is not page aligned, we have to read into data buffer
-+ * due to ecc, else we read into return buffer direct
-+ */
-+ if (aligned)
-+ data_poi = &buf[read];
-+ else
-+ data_poi = this->data_buf;
-+
-+ /* Check, if we have this page in the buffer
-+ *
-+ * FIXME: Make it work when we must provide oob data too,
-+ * check the usage of data_buf oob field
-+ */
-+ if (realpage == this->pagebuf && !oob_buf) {
-+ /* aligned read ? */
-+ if (aligned)
-+ memcpy (data_poi, this->data_buf, end);
-+ goto readdata;
-+ }
-+
-+ /* Check, if we must send the read command */
-+ if (sndcmd) {
-+ this->cmdfunc (mtd, NAND_CMD_READ0, 0x00, page);
-+ sndcmd = 0;
-+ }
-+
-+ /* get oob area, if we have no oob buffer from fs-driver */
-+ if (!oob_buf || oobsel->useecc == MTD_NANDECC_AUTOPLACE ||
-+ oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
-+ oob_data = &this->data_buf[end];
-+
-+ eccsteps = this->eccsteps;
-+
-+ switch (eccmode) {
-+ case NAND_ECC_NONE: { /* No ECC, Read in a page */
-+#if 0
-+ static unsigned long lastwhinge = 0;
-+ if ((lastwhinge / HZ) != (jiffies / HZ)) {
-+ puts ("Reading data from NAND FLASH without ECC is not recommended\r\n");
-+ lastwhinge = jiffies;
-+ }
-+#endif
-+ this->read_buf(mtd, data_poi, end);
-+ break;
-+ }
-+
-+ case NAND_ECC_SOFT: /* Software ECC 3/256: Read in a page + oob data */
-+ this->read_buf(mtd, data_poi, end);
-+ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=3, datidx += ecc)
-+ this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
-+ break;
-+
-+ default:
-+#if NAND_HWECC_SUPPORT
-+ for (i = 0, datidx = 0; eccsteps; eccsteps--, i+=eccbytes, datidx += ecc) {
-+ this->enable_hwecc(mtd, NAND_ECC_READ);
-+ this->read_buf(mtd, &data_poi[datidx], ecc);
-+
-+ /* HW ecc with syndrome calculation must read the
-+ * syndrome from flash immidiately after the data */
-+ if (!compareecc) {
-+ /* Some hw ecc generators need to know when the
-+ * syndrome is read from flash */
-+ this->enable_hwecc(mtd, NAND_ECC_READSYN);
-+ this->read_buf(mtd, &oob_data[i], eccbytes);
-+ /* We calc error correction directly, it checks the hw
-+ * generator for an error, reads back the syndrome and
-+ * does the error correction on the fly */
-+ ecc_status = this->correct_data(mtd, &data_poi[datidx], &oob_data[i], &ecc_code[i]);
-+ if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: "
-+ "Failed ECC read, page 0x%08x on chip %d\n", page, chipnr);
-+ ecc_failed++;
-+ }
-+ } else {
-+ this->calculate_ecc(mtd, &data_poi[datidx], &ecc_calc[i]);
-+ }
-+ }
-+#endif
-+ break;
-+ }
-+
-+ /* read oobdata */
-+ this->read_buf(mtd, &oob_data[mtd->oobsize - oobreadlen], oobreadlen);
-+
-+ /* Skip ECC check, if not requested (ECC_NONE or HW_ECC with syndromes) */
-+ if (!compareecc)
-+ goto readoob;
-+
-+ /* Pick the ECC bytes out of the oob data */
-+ for (j = 0; j < oobsel->eccbytes; j++)
-+ ecc_code[j] = oob_data[oob_config[j]];
-+
-+ /* correct data, if neccecary */
-+ for (i = 0, j = 0, datidx = 0; i < this->eccsteps; i++, datidx += ecc) {
-+ ecc_status = this->correct_data(mtd, &data_poi[datidx], &ecc_code[j], &ecc_calc[j]);
-+
-+ /* Get next chunk of ecc bytes */
-+ j += eccbytes;
-+
-+ /* Check, if we have a fs supplied oob-buffer,
-+ * This is the legacy mode. Used by YAFFS1
-+ * Should go away some day
-+ */
-+ if (oob_buf && oobsel->useecc == MTD_NANDECC_PLACE) {
-+ int *p = (int *)(&oob_data[mtd->oobsize]);
-+ p[i] = ecc_status;
-+ }
-+
-+ if ((ecc_status == -1) || (ecc_status > (flags && 0xff))) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_ecc: " "Failed ECC read, page 0x%08x\n", page);
-+ D(
-+ puts ("nand_read_ecc: " "Failed ECC read, page ");
-+ putx (page);
-+ putnl();
-+ )
-+ ecc_failed++;
-+ }
-+ }
-+
-+ readoob:
-+ /* check, if we have a fs supplied oob-buffer */
-+ if (oob_buf) {
-+ /* without autoplace. Legacy mode used by YAFFS1 */
-+ switch(oobsel->useecc) {
-+ case MTD_NANDECC_AUTOPLACE:
-+ case MTD_NANDECC_AUTOPL_USR:
-+ /* Walk through the autoplace chunks */
-+ for (i = 0; oobsel->oobfree[i][1]; i++) {
-+ int from = oobsel->oobfree[i][0];
-+ int num = oobsel->oobfree[i][1];
-+ memcpy(&oob_buf[oob], &oob_data[from], num);
-+ oob += num;
-+ }
-+ break;
-+ case MTD_NANDECC_PLACE:
-+ /* YAFFS1 legacy mode */
-+ oob_data += this->eccsteps * sizeof (int);
-+ default:
-+ oob_data += mtd->oobsize;
-+ }
-+ }
-+ readdata:
-+ /* Partial page read, transfer data into fs buffer */
-+ if (!aligned) {
-+ for (j = col; j < end && read < len; j++)
-+ buf[read++] = data_poi[j];
-+ this->pagebuf = realpage;
-+ } else
-+ read += mtd->oobblock;
-+
-+ /* Apply delay or wait for ready/busy pin
-+ * Do this before the AUTOINCR check, so no problems
-+ * arise if a chip which does auto increment
-+ * is marked as NOAUTOINCR by the board driver.
-+ */
-+ if (!this->dev_ready)
-+ udelay (this->chip_delay);
-+ else
-+ nand_wait_ready(mtd);
-+
-+ if (read == len)
-+ break;
-+
-+ /* For subsequent reads align to page boundary. */
-+ col = 0;
-+ /* Increment page address */
-+ realpage++;
-+
-+ page = realpage & this->pagemask;
-+ /* Check, if we cross a chip boundary */
-+ if (!page) {
-+ chipnr++;
-+ this->select_chip(mtd, -1);
-+ this->select_chip(mtd, chipnr);
-+ }
-+ /* Check, if the chip supports auto page increment
-+ * or if we have hit a block boundary.
-+ */
-+ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
-+ sndcmd = 1;
-+ }
-+
-+ /* Deselect and wake up anyone waiting on the device */
-+ if (flags & NAND_GET_DEVICE)
-+ nand_release_device(mtd);
-+
-+ /*
-+ * Return success, if no ECC failures, else -EBADMSG
-+ * fs driver will take care of that, because
-+ * retlen == desired len and result == -EBADMSG
-+ */
-+ *retlen = read;
-+ return ecc_failed ? -EBADMSG : 0;
-+}
-+
-+/**
-+ * nand_read_oob - [MTD Interface] NAND read out-of-band
-+ * @mtd: MTD device structure
-+ * @from: offset to read from
-+ * @len: number of bytes to read
-+ * @retlen: pointer to variable to store the number of read bytes
-+ * @buf: the databuffer to put data
-+ *
-+ * NAND read out-of-band data from the spare area
-+ */
-+static int nand_read_oob (struct mtd_info *mtd, loff_t from, size_t len, size_t * retlen, u_char * buf)
-+{
-+ int i, col, page, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
-+
-+ /* Shift to get page */
-+ page = (int)(from >> this->page_shift);
-+ chipnr = (int)(from >> this->chip_shift);
-+
-+ /* Mask to get column */
-+ col = from & (mtd->oobsize - 1);
-+
-+ /* Initialize return length value */
-+ *retlen = 0;
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_oob: Attempt read beyond end of device\n");
-+ *retlen = 0;
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd , FL_READING);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+
-+ /* Send the read command */
-+ this->cmdfunc (mtd, NAND_CMD_READOOB, col, page & this->pagemask);
-+ /*
-+ * Read the data, if we read more than one page
-+ * oob data, let the device transfer the data !
-+ */
-+ i = 0;
-+ while (i < len) {
-+ int thislen = mtd->oobsize - col;
-+ thislen = min_t(int, thislen, len);
-+ this->read_buf(mtd, &buf[i], thislen);
-+ i += thislen;
-+
-+ /* Read more ? */
-+ if (i < len) {
-+ page++;
-+ col = 0;
-+
-+ /* Check, if we cross a chip boundary */
-+ if (!(page & this->pagemask)) {
-+ chipnr++;
-+ this->select_chip(mtd, -1);
-+ this->select_chip(mtd, chipnr);
-+ }
-+
-+ /* Apply delay or wait for ready/busy pin
-+ * Do this before the AUTOINCR check, so no problems
-+ * arise if a chip which does auto increment
-+ * is marked as NOAUTOINCR by the board driver.
-+ */
-+ if (!this->dev_ready)
-+ udelay (this->chip_delay);
-+ else
-+ nand_wait_ready(mtd);
-+
-+ /* Check, if the chip supports auto page increment
-+ * or if we have hit a block boundary.
-+ */
-+ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck)) {
-+ /* For subsequent page reads set offset to 0 */
-+ this->cmdfunc (mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
-+ }
-+ }
-+ }
-+
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+
-+ /* Return happy */
-+ *retlen = len;
-+ return 0;
-+}
-+
-+/**
-+ * nand_read_raw - [GENERIC] Read raw data including oob into buffer
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @from: offset to read from
-+ * @len: number of bytes to read
-+ * @ooblen: number of oob data bytes to read
-+ *
-+ * Read raw data including oob into buffer
-+ */
-+int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int page = (int) (from >> this->page_shift);
-+ int chip = (int) (from >> this->chip_shift);
-+ int sndcmd = 1;
-+ int cnt = 0;
-+ int pagesize = mtd->oobblock + mtd->oobsize;
-+ int blockcheck = (1 << (this->phys_erase_shift - this->page_shift)) - 1;
-+
-+ /* Do not allow reads past end of device */
-+ if ((from + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_read_raw: Attempt read beyond end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd , FL_READING);
-+
-+ this->select_chip (mtd, chip);
-+
-+ /* Add requested oob length */
-+ len += ooblen;
-+
-+ while (len) {
-+ if (sndcmd)
-+ this->cmdfunc (mtd, NAND_CMD_READ0, 0, page & this->pagemask);
-+ sndcmd = 0;
-+
-+ this->read_buf (mtd, &buf[cnt], pagesize);
-+
-+ len -= pagesize;
-+ cnt += pagesize;
-+ page++;
-+
-+ if (!this->dev_ready)
-+ udelay (this->chip_delay);
-+ else
-+ nand_wait_ready(mtd);
-+
-+ /* Check, if the chip supports auto page increment */
-+ if (!NAND_CANAUTOINCR(this) || !(page & blockcheck))
-+ sndcmd = 1;
-+ }
-+
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+ return 0;
-+}
-+
-+
-+/**
-+ * nand_prepare_oobbuf - [GENERIC] Prepare the out of band buffer
-+ * @mtd: MTD device structure
-+ * @fsbuf: buffer given by fs driver
-+ * @oobsel: out of band selection structre
-+ * @autoplace: 1 = place given buffer into the oob bytes
-+ * @numpages: number of pages to prepare
-+ *
-+ * Return:
-+ * 1. Filesystem buffer available and autoplacement is off,
-+ * return filesystem buffer
-+ * 2. No filesystem buffer or autoplace is off, return internal
-+ * buffer
-+ * 3. Filesystem buffer is given and autoplace selected
-+ * put data from fs buffer into internal buffer and
-+ * retrun internal buffer
-+ *
-+ * Note: The internal buffer is filled with 0xff. This must
-+ * be done only once, when no autoplacement happens
-+ * Autoplacement sets the buffer dirty flag, which
-+ * forces the 0xff fill before using the buffer again.
-+ *
-+*/
-+#if NAND_WRITE_SUPPORT
-+static u_char * nand_prepare_oobbuf (struct mtd_info *mtd, u_char *fsbuf, struct nand_oobinfo *oobsel,
-+ int autoplace, int numpages)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int i, len, ofs;
-+
-+ /* Zero copy fs supplied buffer */
-+ if (fsbuf && !autoplace)
-+ return fsbuf;
-+
-+ /* Check, if the buffer must be filled with ff again */
-+ if (this->oobdirty) {
-+ memset (this->oob_buf, 0xff,
-+ mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-+ this->oobdirty = 0;
-+ }
-+
-+ /* If we have no autoplacement or no fs buffer use the internal one */
-+ if (!autoplace || !fsbuf)
-+ return this->oob_buf;
-+
-+ /* Walk through the pages and place the data */
-+ this->oobdirty = 1;
-+ ofs = 0;
-+ while (numpages--) {
-+ for (i = 0, len = 0; len < mtd->oobavail; i++) {
-+ int to = ofs + oobsel->oobfree[i][0];
-+ int num = oobsel->oobfree[i][1];
-+ memcpy (&this->oob_buf[to], fsbuf, num);
-+ len += num;
-+ fsbuf += num;
-+ }
-+ ofs += mtd->oobavail;
-+ }
-+ return this->oob_buf;
-+}
-+#endif
-+
-+#define NOTALIGNED(x) (x & (mtd->oobblock-1)) != 0
-+
-+/**
-+ * nand_write - [MTD Interface] compability function for nand_write_ecc
-+ * @mtd: MTD device structure
-+ * @to: offset to write to
-+ * @len: number of bytes to write
-+ * @retlen: pointer to variable to store the number of written bytes
-+ * @buf: the data to write
-+ *
-+ * This function simply calls nand_write_ecc with oob buffer and oobsel = NULL
-+ *
-+*/
-+#if NAND_WRITE_SUPPORT
-+static int nand_write (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+ return (nand_write_ecc (mtd, to, len, retlen, buf, NULL, NULL));
-+}
-+#endif
-+
-+/**
-+ * nand_write_ecc - [MTD Interface] NAND write with ECC
-+ * @mtd: MTD device structure
-+ * @to: offset to write to
-+ * @len: number of bytes to write
-+ * @retlen: pointer to variable to store the number of written bytes
-+ * @buf: the data to write
-+ * @eccbuf: filesystem supplied oob data buffer
-+ * @oobsel: oob selection structure
-+ *
-+ * NAND write with ECC
-+ */
-+#if NAND_WRITE_SUPPORT
-+static int nand_write_ecc (struct mtd_info *mtd, loff_t to, size_t len,
-+ size_t * retlen, const u_char * buf, u_char * eccbuf, struct nand_oobinfo *oobsel)
-+{
-+ int startpage, page, ret = -EIO, oob = 0, written = 0, chipnr;
-+ int autoplace = 0, numpages, totalpages;
-+ struct nand_chip *this = mtd->priv;
-+ u_char *oobbuf, *bufstart;
-+ int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_ecc: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+ /* Initialize retlen, in case of early exit */
-+ *retlen = 0;
-+
-+ /* Do not allow write past end of device */
-+ if ((to + len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: Attempt to write past end of page\n");
-+ return -EINVAL;
-+ }
-+
-+ /* reject writes, which are not page aligned */
-+ if (NOTALIGNED (to) || NOTALIGNED(len)) {
-+ puts ("nand_write_ecc: Attempt to write not page aligned data\r\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd, FL_WRITING);
-+
-+ /* Calculate chipnr */
-+ chipnr = (int)(to >> this->chip_shift);
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+
-+ /* Check, if it is write protected */
-+ if (nand_check_wp(mtd))
-+ goto out;
-+
-+ /* if oobsel is NULL, use chip defaults */
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ /* Autoplace of oob data ? Use the default placement scheme */
-+ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
-+ oobsel = this->autooob;
-+ autoplace = 1;
-+ }
-+ if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
-+ autoplace = 1;
-+
-+ /* Setup variables and oob buffer */
-+ totalpages = len >> this->page_shift;
-+ page = (int) (to >> this->page_shift);
-+ /* Invalidate the page cache, if we write to the cached page */
-+ if (page <= this->pagebuf && this->pagebuf < (page + totalpages))
-+ this->pagebuf = -1;
-+
-+ /* Set it relative to chip */
-+ page &= this->pagemask;
-+ startpage = page;
-+ /* Calc number of pages we can write in one go */
-+ numpages = min (ppblock - (startpage & (ppblock - 1)), totalpages);
-+ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel, autoplace, numpages);
-+ bufstart = (u_char *)buf;
-+
-+ /* Loop until all data is written */
-+ while (written < len) {
-+
-+ this->data_poi = (u_char*) &buf[written];
-+ /* Write one page. If this is the last page to write
-+ * or the last page in this block, then use the
-+ * real pageprogram command, else select cached programming
-+ * if supported by the chip.
-+ */
-+ ret = nand_write_page (mtd, this, page, &oobbuf[oob], oobsel, (--numpages > 0));
-+ if (ret) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: write_page failed %d\n", ret);
-+ goto out;
-+ }
-+ /* Next oob page */
-+ oob += mtd->oobsize;
-+ /* Update written bytes count */
-+ written += mtd->oobblock;
-+ if (written == len)
-+ goto cmp;
-+
-+ /* Increment page address */
-+ page++;
-+
-+ /* Have we hit a block boundary ? Then we have to verify and
-+ * if verify is ok, we have to setup the oob buffer for
-+ * the next pages.
-+ */
-+ if (!(page & (ppblock - 1))){
-+ int ofs;
-+ this->data_poi = bufstart;
-+ ret = nand_verify_pages (mtd, this, startpage,
-+ page - startpage,
-+ oobbuf, oobsel, chipnr, (eccbuf != NULL));
-+ if (ret) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
-+ goto out;
-+ }
-+ *retlen = written;
-+
-+ ofs = autoplace ? mtd->oobavail : mtd->oobsize;
-+ if (eccbuf)
-+ eccbuf += (page - startpage) * ofs;
-+ totalpages -= page - startpage;
-+ numpages = min (totalpages, ppblock);
-+ page &= this->pagemask;
-+ startpage = page;
-+ oobbuf = nand_prepare_oobbuf (mtd, eccbuf, oobsel,
-+ autoplace, numpages);
-+ oob = 0;
-+ /* Check, if we cross a chip boundary */
-+ if (!page) {
-+ chipnr++;
-+ this->select_chip(mtd, -1);
-+ this->select_chip(mtd, chipnr);
-+ }
-+ }
-+ }
-+ /* Verify the remaining pages */
-+cmp:
-+ this->data_poi = bufstart;
-+ ret = nand_verify_pages (mtd, this, startpage, totalpages,
-+ oobbuf, oobsel, chipnr, (eccbuf != NULL));
-+ if (!ret)
-+ *retlen = written;
-+ else
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_ecc: verify_pages failed %d\n", ret);
-+
-+out:
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+#endif
-+
-+
-+/**
-+ * nand_write_oob - [MTD Interface] NAND write out-of-band
-+ * @mtd: MTD device structure
-+ * @to: offset to write to
-+ * @len: number of bytes to write
-+ * @retlen: pointer to variable to store the number of written bytes
-+ * @buf: the data to write
-+ *
-+ * NAND write out-of-band
-+ */
-+#if NAND_WRITE_SUPPORT
-+static int nand_write_oob (struct mtd_info *mtd, loff_t to, size_t len, size_t * retlen, const u_char * buf)
-+{
-+ int column, page, status, ret = -EIO, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
-+
-+ /* Shift to get page */
-+ page = (int) (to >> this->page_shift);
-+ chipnr = (int) (to >> this->chip_shift);
-+
-+ /* Mask to get column */
-+ column = to & (mtd->oobsize - 1);
-+
-+ /* Initialize return length value */
-+ *retlen = 0;
-+
-+ /* Do not allow write past end of page */
-+ if ((column + len) > mtd->oobsize) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: Attempt to write past end of page\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd, FL_WRITING);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+
-+ /* Reset the chip. Some chips (like the Toshiba TC5832DC found
-+ in one of my DiskOnChip 2000 test units) will clear the whole
-+ data page too if we don't do this. I have no clue why, but
-+ I seem to have 'fixed' it in the doc2000 driver in
-+ August 1999. dwmw2. */
-+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
-+
-+ /* Check, if it is write protected */
-+ if (nand_check_wp(mtd))
-+ goto out;
-+
-+ /* Invalidate the page cache, if we write to the cached page */
-+ if (page == this->pagebuf)
-+ this->pagebuf = -1;
-+
-+ if (NAND_MUST_PAD(this)) {
-+ /* Write out desired data */
-+ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock, page & this->pagemask);
-+ /* prepad 0xff for partial programming */
-+ this->write_buf(mtd, ffchars, column);
-+ /* write data */
-+ this->write_buf(mtd, buf, len);
-+ /* postpad 0xff for partial programming */
-+ this->write_buf(mtd, ffchars, mtd->oobsize - (len+column));
-+ } else {
-+ /* Write out desired data */
-+ this->cmdfunc (mtd, NAND_CMD_SEQIN, mtd->oobblock + column, page & this->pagemask);
-+ /* write data */
-+ this->write_buf(mtd, buf, len);
-+ }
-+ /* Send command to program the OOB data */
-+ this->cmdfunc (mtd, NAND_CMD_PAGEPROG, -1, -1);
-+
-+ status = this->waitfunc (mtd, this, FL_WRITING);
-+
-+ /* See if device thinks it succeeded */
-+ if (status & NAND_STATUS_FAIL) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write, page 0x%08x\n", page);
-+ ret = -EIO;
-+ goto out;
-+ }
-+ /* Return happy */
-+ *retlen = len;
-+
-+#ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-+ /* Send command to read back the data */
-+ this->cmdfunc (mtd, NAND_CMD_READOOB, column, page & this->pagemask);
-+
-+ if (this->verify_buf(mtd, buf, len)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_write_oob: " "Failed write verify, page 0x%08x\n", page);
-+ ret = -EIO;
-+ goto out;
-+ }
-+#endif
-+ ret = 0;
-+out:
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+
-+ return ret;
-+}
-+#endif
-+
-+
-+/**
-+ * nand_writev - [MTD Interface] compabilty function for nand_writev_ecc
-+ * @mtd: MTD device structure
-+ * @vecs: the iovectors to write
-+ * @count: number of vectors
-+ * @to: offset to write to
-+ * @retlen: pointer to variable to store the number of written bytes
-+ *
-+ * NAND write with kvec. This just calls the ecc function
-+ */
-+#if NAND_KVEC_SUPPORT
-+#if NAND_WRITE_SUPPORT
-+static int nand_writev (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+ loff_t to, size_t * retlen)
-+{
-+ return (nand_writev_ecc (mtd, vecs, count, to, retlen, NULL, NULL));
-+}
-+#endif
-+#endif
-+
-+/**
-+ * nand_writev_ecc - [MTD Interface] write with iovec with ecc
-+ * @mtd: MTD device structure
-+ * @vecs: the iovectors to write
-+ * @count: number of vectors
-+ * @to: offset to write to
-+ * @retlen: pointer to variable to store the number of written bytes
-+ * @eccbuf: filesystem supplied oob data buffer
-+ * @oobsel: oob selection structure
-+ *
-+ * NAND write with iovec with ecc
-+ */
-+#if NAND_KVEC_SUPPORT
-+#if NAND_WRITE_SUPPORT
-+static int nand_writev_ecc (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count,
-+ loff_t to, size_t * retlen, u_char *eccbuf, struct nand_oobinfo *oobsel)
-+{
-+ int i, page, len, total_len, ret = -EIO, written = 0, chipnr;
-+ int oob, numpages, autoplace = 0, startpage;
-+ struct nand_chip *this = mtd->priv;
-+ int ppblock = (1 << (this->phys_erase_shift - this->page_shift));
-+ u_char *oobbuf, *bufstart;
-+
-+ /* Preset written len for early exit */
-+ *retlen = 0;
-+
-+ /* Calculate total length of data */
-+ total_len = 0;
-+ for (i = 0; i < count; i++)
-+ total_len += (int) vecs[i].iov_len;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3,
-+ "nand_writev: to = 0x%08x, len = %i, count = %ld\n", (unsigned int) to, (unsigned int) total_len, count);
-+
-+ /* Do not allow write past end of page */
-+ if ((to + total_len) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_writev: Attempted write past end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ /* reject writes, which are not page aligned */
-+ if (NOTALIGNED (to) || NOTALIGNED(total_len)) {
-+ puts ("nand_write_ecc: Attempt to write not page aligned data\r\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd, FL_WRITING);
-+
-+ /* Get the current chip-nr */
-+ chipnr = (int) (to >> this->chip_shift);
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+
-+ /* Check, if it is write protected */
-+ if (nand_check_wp(mtd))
-+ goto out;
-+
-+ /* if oobsel is NULL, use chip defaults */
-+ if (oobsel == NULL)
-+ oobsel = &mtd->oobinfo;
-+
-+ /* Autoplace of oob data ? Use the default placement scheme */
-+ if (oobsel->useecc == MTD_NANDECC_AUTOPLACE) {
-+ oobsel = this->autooob;
-+ autoplace = 1;
-+ }
-+ if (oobsel->useecc == MTD_NANDECC_AUTOPL_USR)
-+ autoplace = 1;
-+
-+ /* Setup start page */
-+ page = (int) (to >> this->page_shift);
-+ /* Invalidate the page cache, if we write to the cached page */
-+ if (page <= this->pagebuf && this->pagebuf < ((to + total_len) >> this->page_shift))
-+ this->pagebuf = -1;
-+
-+ startpage = page & this->pagemask;
-+
-+ /* Loop until all kvec' data has been written */
-+ len = 0;
-+ while (count) {
-+ /* If the given tuple is >= pagesize then
-+ * write it out from the iov
-+ */
-+ if ((vecs->iov_len - len) >= mtd->oobblock) {
-+ /* Calc number of pages we can write
-+ * out of this iov in one go */
-+ numpages = (vecs->iov_len - len) >> this->page_shift;
-+ /* Do not cross block boundaries */
-+ numpages = min (ppblock - (startpage & (ppblock - 1)), numpages);
-+ oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
-+ bufstart = (u_char *)vecs->iov_base;
-+ bufstart += len;
-+ this->data_poi = bufstart;
-+ oob = 0;
-+ for (i = 1; i <= numpages; i++) {
-+ /* Write one page. If this is the last page to write
-+ * then use the real pageprogram command, else select
-+ * cached programming if supported by the chip.
-+ */
-+ ret = nand_write_page (mtd, this, page & this->pagemask,
-+ &oobbuf[oob], oobsel, i != numpages);
-+ if (ret)
-+ goto out;
-+ this->data_poi += mtd->oobblock;
-+ len += mtd->oobblock;
-+ oob += mtd->oobsize;
-+ page++;
-+ }
-+ /* Check, if we have to switch to the next tuple */
-+ if (len >= (int) vecs->iov_len) {
-+ vecs++;
-+ len = 0;
-+ count--;
-+ }
-+ } else {
-+ /* We must use the internal buffer, read data out of each
-+ * tuple until we have a full page to write
-+ */
-+ int cnt = 0;
-+ while (cnt < mtd->oobblock) {
-+ if (vecs->iov_base != NULL && vecs->iov_len)
-+ this->data_buf[cnt++] = ((u_char *) vecs->iov_base)[len++];
-+ /* Check, if we have to switch to the next tuple */
-+ if (len >= (int) vecs->iov_len) {
-+ vecs++;
-+ len = 0;
-+ count--;
-+ }
-+ }
-+ this->pagebuf = page;
-+ this->data_poi = this->data_buf;
-+ bufstart = this->data_poi;
-+ numpages = 1;
-+ oobbuf = nand_prepare_oobbuf (mtd, NULL, oobsel, autoplace, numpages);
-+ ret = nand_write_page (mtd, this, page & this->pagemask,
-+ oobbuf, oobsel, 0);
-+ if (ret)
-+ goto out;
-+ page++;
-+ }
-+
-+ this->data_poi = bufstart;
-+ ret = nand_verify_pages (mtd, this, startpage, numpages, oobbuf, oobsel, chipnr, 0);
-+ if (ret)
-+ goto out;
-+
-+ written += mtd->oobblock * numpages;
-+ /* All done ? */
-+ if (!count)
-+ break;
-+
-+ startpage = page & this->pagemask;
-+ /* Check, if we cross a chip boundary */
-+ if (!startpage) {
-+ chipnr++;
-+ this->select_chip(mtd, -1);
-+ this->select_chip(mtd, chipnr);
-+ }
-+ }
-+ ret = 0;
-+out:
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+
-+ *retlen = written;
-+ return ret;
-+}
-+#endif
-+#endif
-+
-+/**
-+ * single_erease_cmd - [GENERIC] NAND standard block erase command function
-+ * @mtd: MTD device structure
-+ * @page: the page address of the block which will be erased
-+ *
-+ * Standard erase command for NAND chips
-+ */
-+#if NAND_ERASE_SUPPORT
-+static void single_erase_cmd (struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ /* Send commands to erase a block */
-+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
-+ this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
-+}
-+#endif
-+
-+/**
-+ * multi_erease_cmd - [GENERIC] AND specific block erase command function
-+ * @mtd: MTD device structure
-+ * @page: the page address of the block which will be erased
-+ *
-+ * AND multi block erase command function
-+ * Erase 4 consecutive blocks
-+ */
-+#if NAND_ERASE_SUPPORT
-+static void multi_erase_cmd (struct mtd_info *mtd, int page)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ /* Send commands to erase a block */
-+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
-+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
-+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page++);
-+ this->cmdfunc (mtd, NAND_CMD_ERASE1, -1, page);
-+ this->cmdfunc (mtd, NAND_CMD_ERASE2, -1, -1);
-+}
-+#endif
-+
-+/**
-+ * nand_erase - [MTD Interface] erase block(s)
-+ * @mtd: MTD device structure
-+ * @instr: erase instruction
-+ *
-+ * Erase one ore more blocks
-+ */
-+#if NAND_ERASE_SUPPORT
-+static int nand_erase (struct mtd_info *mtd, struct erase_info *instr)
-+{
-+ return nand_erase_nand (mtd, instr, 0);
-+}
-+#endif
-+
-+#define BBT_PAGE_MASK 0xffffff3f
-+/**
-+ * nand_erase_intern - [NAND Interface] erase block(s)
-+ * @mtd: MTD device structure
-+ * @instr: erase instruction
-+ * @allowbbt: allow erasing the bbt area
-+ *
-+ * Erase one ore more blocks
-+ */
-+#if NAND_ERASE_SUPPORT
-+int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt)
-+{
-+ int page, len, status, pages_per_block, ret, chipnr;
-+ struct nand_chip *this = mtd->priv;
-+ int rewrite_bbt[NAND_MAX_CHIPS]={0}; /* flags to indicate the page, if bbt needs to be rewritten. */
-+ unsigned int bbt_masked_page; /* bbt mask to compare to page being erased. */
-+ /* It is used to see if the current page is in the same */
-+ /* 256 block group and the same bank as the bbt. */
-+
-+ DEBUG (MTD_DEBUG_LEVEL3,
-+ "nand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
-+
-+ /* Start address must align on block boundary */
-+ if (instr->addr & ((1 << this->phys_erase_shift) - 1)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Unaligned address\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Length must align on block boundary */
-+ if (instr->len & ((1 << this->phys_erase_shift) - 1)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Length not block aligned\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Do not allow erase past end of device */
-+ if ((instr->len + instr->addr) > mtd->size) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Erase past end of device\n");
-+ return -EINVAL;
-+ }
-+
-+ instr->fail_addr = 0xffffffff;
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd, FL_ERASING);
-+
-+ /* Shift to get first page */
-+ page = (int) (instr->addr >> this->page_shift);
-+ chipnr = (int) (instr->addr >> this->chip_shift);
-+
-+ /* Calculate pages in each block */
-+ pages_per_block = 1 << (this->phys_erase_shift - this->page_shift);
-+
-+ /* Select the NAND device */
-+ this->select_chip(mtd, chipnr);
-+
-+ /* Check the WP bit */
-+ /* Check, if it is write protected */
-+ if (nand_check_wp(mtd)) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: Device is write protected!!!\n");
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /* if BBT requires refresh, set the BBT page mask to see if the BBT should be rewritten */
-+ if (this->options & BBT_AUTO_REFRESH) {
-+ bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
-+ } else {
-+ bbt_masked_page = 0xffffffff; /* should not match anything */
-+ }
-+
-+ /* Loop through the pages */
-+ len = instr->len;
-+
-+ instr->state = MTD_ERASING;
-+
-+ while (len) {
-+ /* Check if we have a bad block, we do not erase bad blocks ! */
-+ if (nand_block_checkbad(mtd, ((loff_t) page) << this->page_shift, 0, allowbbt)) {
-+ puts ("nand_erase: attempt to erase a bad block at page ");
-+ putx (page);
-+ putnl ();
-+ instr->state = MTD_ERASE_FAILED;
-+ goto erase_exit;
-+ }
-+
-+ /* Invalidate the page cache, if we erase the block which contains
-+ the current cached page */
-+ if (page <= this->pagebuf && this->pagebuf < (page + pages_per_block))
-+ this->pagebuf = -1;
-+
-+ this->erase_cmd (mtd, page & this->pagemask);
-+
-+ status = this->waitfunc (mtd, this, FL_ERASING);
-+
-+ /* See if operation failed and additional status checks are available */
-+ if ((status & NAND_STATUS_FAIL) && (this->errstat)) {
-+ status = this->errstat(mtd, this, FL_ERASING, status, page);
-+ }
-+
-+ /* See if block erase succeeded */
-+ if (status & NAND_STATUS_FAIL) {
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page);
-+ instr->state = MTD_ERASE_FAILED;
-+ instr->fail_addr = (page << this->page_shift);
-+ goto erase_exit;
-+ }
-+
-+ /* if BBT requires refresh, set the BBT rewrite flag to the page being erased */
-+ if (this->options & BBT_AUTO_REFRESH) {
-+ if (((page & BBT_PAGE_MASK) == bbt_masked_page) &&
-+ (page != this->bbt_td->pages[chipnr])) {
-+ rewrite_bbt[chipnr] = (page << this->page_shift);
-+ }
-+ }
-+
-+ /* Increment page address and decrement length */
-+ len -= (1 << this->phys_erase_shift);
-+ page += pages_per_block;
-+
-+ /* Check, if we cross a chip boundary */
-+ if (len && !(page & this->pagemask)) {
-+ chipnr++;
-+ this->select_chip(mtd, -1);
-+ this->select_chip(mtd, chipnr);
-+
-+ /* if BBT requires refresh and BBT-PERCHIP,
-+ * set the BBT page mask to see if this BBT should be rewritten */
-+ if ((this->options & BBT_AUTO_REFRESH) && (this->bbt_td->options & NAND_BBT_PERCHIP)) {
-+ bbt_masked_page = this->bbt_td->pages[chipnr] & BBT_PAGE_MASK;
-+ }
-+
-+ }
-+ }
-+ instr->state = MTD_ERASE_DONE;
-+
-+erase_exit:
-+
-+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
-+#if 0
-+ /* Do call back function */
-+ if (!ret)
-+ mtd_erase_callback(instr);
-+#endif
-+
-+ /* Deselect and wake up anyone waiting on the device */
-+ nand_release_device(mtd);
-+
-+#if NAND_BBT_SUPPORT
-+ /* if BBT requires refresh and erase was successful, rewrite any selected bad block tables */
-+ if ((this->options & BBT_AUTO_REFRESH) && (!ret)) {
-+ for (chipnr = 0; chipnr < this->numchips; chipnr++) {
-+ if (rewrite_bbt[chipnr]) {
-+ /* update the BBT for chip */
-+ DEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt (%d:0x%0x 0x%0x)\n",
-+ chipnr, rewrite_bbt[chipnr], this->bbt_td->pages[chipnr]);
-+ nand_update_bbt (mtd, rewrite_bbt[chipnr]);
-+ }
-+ }
-+ }
-+#endif
-+
-+ /* Return more or less happy */
-+ return ret;
-+}
-+#endif
-+
-+/**
-+ * nand_sync - [MTD Interface] sync
-+ * @mtd: MTD device structure
-+ *
-+ * Sync is actually a wait for chip ready function
-+ */
-+#if 0 /* not needed */
-+static void nand_sync (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ DEBUG (MTD_DEBUG_LEVEL3, "nand_sync: called\n");
-+
-+ /* Grab the lock and see if the device is available */
-+ nand_get_device (this, mtd, FL_SYNCING);
-+ /* Release it and go back */
-+ nand_release_device (mtd);
-+}
-+#endif
-+
-+
-+/**
-+ * nand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset relative to mtd start
-+ */
-+static int nand_block_isbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+ /* Check for invalid offset */
-+ if (ofs > mtd->size)
-+ return -EINVAL;
-+
-+ return nand_block_checkbad (mtd, ofs, 1, 0);
-+}
-+
-+/**
-+ * nand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
-+ * @mtd: MTD device structure
-+ * @ofs: offset relative to mtd start
-+ */
-+#if NAND_WRITE_SUPPORT
-+static int nand_block_markbad (struct mtd_info *mtd, loff_t ofs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int ret;
-+
-+ if ((ret = nand_block_isbad(mtd, ofs))) {
-+ /* If it was bad already, return success and do nothing. */
-+ if (ret > 0)
-+ return 0;
-+ return ret;
-+ }
-+
-+ return this->block_markbad(mtd, ofs);
-+}
-+#endif
-+
-+/**
-+ * nand_suspend - [MTD Interface] Suspend the NAND flash
-+ * @mtd: MTD device structure
-+ */
-+#if 0 /* don't need it */
-+static int nand_suspend(struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ return nand_get_device (this, mtd, FL_PM_SUSPENDED);
-+}
-+#endif
-+
-+/**
-+ * nand_resume - [MTD Interface] Resume the NAND flash
-+ * @mtd: MTD device structure
-+ */
-+#if 0 /* don't need it */
-+static void nand_resume(struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ if (this->state == FL_PM_SUSPENDED)
-+ nand_release_device(mtd);
-+ else
-+ puts("resume() called for the chip which is not in suspended state\n");
-+
-+}
-+#endif
-+
-+
-+/**
-+ * nand_scan - [NAND Interface] Scan for the NAND device
-+ * @mtd: MTD device structure
-+ * @maxchips: Number of chips to scan for
-+ *
-+ * This fills out all the not initialized function pointers
-+ * with the defaults.
-+ * The flash ID is read and the mtd/chip structures are
-+ * filled with the appropriate values. Buffers are allocated if
-+ * they are not provided by the board driver
-+ *
-+ */
-+int nand_scan (struct mtd_info *mtd, int maxchips)
-+{
-+ int i, nand_maf_id, nand_dev_id, busw, maf_id;
-+ struct nand_chip *this = mtd->priv;
-+
-+ /* Get buswidth to select the correct functions*/
-+ busw = this->options & NAND_BUSWIDTH_16;
-+
-+ /* check for proper chip_delay setup, set 20us if not */
-+ if (!this->chip_delay)
-+ this->chip_delay = 20;
-+
-+ /* check, if a user supplied command function given */
-+ if (this->cmdfunc == NULL)
-+ this->cmdfunc = nand_command;
-+
-+ /* check, if a user supplied wait function given */
-+ if (this->waitfunc == NULL)
-+ this->waitfunc = nand_wait;
-+
-+ if (!this->select_chip)
-+ this->select_chip = nand_select_chip;
-+ if (!this->write_byte)
-+ this->write_byte = busw ? nand_write_byte16 : nand_write_byte;
-+ if (!this->read_byte)
-+ this->read_byte = busw ? nand_read_byte16 : nand_read_byte;
-+ if (!this->write_word)
-+ this->write_word = nand_write_word;
-+ if (!this->read_word)
-+ this->read_word = nand_read_word;
-+ if (!this->block_bad)
-+ this->block_bad = nand_block_bad;
-+#if NAND_WRITE_SUPPORT
-+ if (!this->block_markbad)
-+ this->block_markbad = nand_default_block_markbad;
-+#endif
-+ if (!this->write_buf)
-+ this->write_buf = busw ? nand_write_buf16 : nand_write_buf;
-+ if (!this->read_buf)
-+ this->read_buf = busw ? nand_read_buf16 : nand_read_buf;
-+ if (!this->verify_buf)
-+ this->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf;
-+#if NAND_BBT_SUPPORT
-+ if (!this->scan_bbt)
-+ this->scan_bbt = nand_default_bbt;
-+#endif
-+
-+ /* Select the device */
-+ this->select_chip(mtd, 0);
-+
-+ /* Send the command for reading device ID */
-+ this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
-+
-+ /* Read manufacturer and device IDs */
-+ nand_maf_id = this->read_byte(mtd);
-+ nand_dev_id = this->read_byte(mtd);
-+
-+ /* Print and store flash device information */
-+ for (i = 0; nand_flash_ids[i].name != NULL; i++) {
-+
-+ if (nand_dev_id != nand_flash_ids[i].id)
-+ continue;
-+
-+ if (!mtd->name) mtd->name = nand_flash_ids[i].name;
-+ this->chipsize = nand_flash_ids[i].chipsize << 20;
-+
-+ /* New devices have all the information in additional id bytes */
-+ if (!nand_flash_ids[i].pagesize) {
-+ int extid;
-+ /* The 3rd id byte contains non relevant data ATM */
-+ extid = this->read_byte(mtd);
-+ /* The 4th id byte is the important one */
-+ extid = this->read_byte(mtd);
-+ /* Calc pagesize */
-+ mtd->oobblock = 1024 << (extid & 0x3);
-+ extid >>= 2;
-+ /* Calc oobsize */
-+ mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock >> 9);
-+ extid >>= 2;
-+ /* Calc blocksize. Blocksize is multiples of 64KiB */
-+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
-+ extid >>= 2;
-+ /* Get buswidth information */
-+ busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
-+
-+ } else {
-+ /* Old devices have this data hardcoded in the
-+ * device id table */
-+ mtd->erasesize = nand_flash_ids[i].erasesize;
-+ mtd->oobblock = nand_flash_ids[i].pagesize;
-+ mtd->oobsize = mtd->oobblock / 32;
-+ busw = nand_flash_ids[i].options & NAND_BUSWIDTH_16;
-+ }
-+
-+ /* Try to identify manufacturer */
-+ for (maf_id = 0; nand_manuf_ids[maf_id].id != 0x0; maf_id++) {
-+ if (nand_manuf_ids[maf_id].id == nand_maf_id)
-+ break;
-+ }
-+
-+ /* Check, if buswidth is correct. Hardware drivers should set
-+ * this correct ! */
-+ if (busw != (this->options & NAND_BUSWIDTH_16)) {
-+#if 0
-+ puts ("Manufacturer ID: ");
-+ putx (nand_maf_id);
-+ puts (", Chip ID: ");
-+ putx (nand_dev_id);
-+ puts (" (");
-+ puts (nand_manuf_ids[maf_id].name);
-+ putc (' ');
-+ puts (mtd->name);
-+ puts (")\r\n");
-+#endif
-+ puts ("Expected NAND bus width ");
-+ putx ((this->options & NAND_BUSWIDTH_16) ? 16 : 8);
-+ puts (",found ");
-+ putx (busw ? 16 : 8);
-+ putnl();
-+ this->select_chip(mtd, -1);
-+ return 1;
-+ }
-+
-+ /* Calculate the address shift from the page size */
-+ this->page_shift = ffs(mtd->oobblock) - 1;
-+ this->bbt_erase_shift = this->phys_erase_shift = ffs(mtd->erasesize) - 1;
-+ this->chip_shift = ffs(this->chipsize) - 1;
-+
-+ /* Set the bad block position */
-+ this->badblockpos = mtd->oobblock > 512 ?
-+ NAND_LARGE_BADBLOCK_POS : NAND_SMALL_BADBLOCK_POS;
-+
-+ /* Get chip options, preserve non chip based options */
-+ this->options &= ~NAND_CHIPOPTIONS_MSK;
-+ this->options |= nand_flash_ids[i].options & NAND_CHIPOPTIONS_MSK;
-+ /* Set this as a default. Board drivers can override it, if neccecary */
-+ this->options |= NAND_NO_AUTOINCR;
-+ /* Check if this is a not a samsung device. Do not clear the options
-+ * for chips which are not having an extended id.
-+ */
-+ if (nand_maf_id != NAND_MFR_SAMSUNG && !nand_flash_ids[i].pagesize)
-+ this->options &= ~NAND_SAMSUNG_LP_OPTIONS;
-+
-+#if NAND_ERASE_SUPPORT
-+ /* Check for AND chips with 4 page planes */
-+ if (this->options & NAND_4PAGE_ARRAY)
-+ this->erase_cmd = multi_erase_cmd;
-+ else
-+ this->erase_cmd = single_erase_cmd;
-+#endif
-+
-+ /* Do not replace user supplied command function ! */
-+ if (mtd->oobblock > 512 && this->cmdfunc == nand_command)
-+ this->cmdfunc = nand_command_lp;
-+
-+ puts ("Manufacturer ID / Chip ID: ");
-+ putx (nand_maf_id << 8 | nand_dev_id);
-+ puts (" (");
-+ puts (nand_manuf_ids[maf_id].name);
-+ putc (' ');
-+ puts (nand_flash_ids[i].name);
-+ puts (")\r\n");
-+ break;
-+ }
-+
-+ if (!nand_flash_ids[i].name) {
-+ puts ("No NAND device found!!!\r\n");
-+ this->select_chip(mtd, -1);
-+ return 1;
-+ }
-+
-+#if NAND_MULTICHIP_SUPPORT
-+ for (i=1; i < maxchips; i++) {
-+ this->select_chip(mtd, i);
-+
-+ /* Send the command for reading device ID */
-+ this->cmdfunc (mtd, NAND_CMD_READID, 0x00, -1);
-+
-+ /* Read manufacturer and device IDs */
-+ if (nand_maf_id != this->read_byte(mtd) ||
-+ nand_dev_id != this->read_byte(mtd))
-+ break;
-+ }
-+ if (i > 1) {
-+ putx (i);
-+ puts (" NAND chips detected\r\n");
-+ }
-+#endif
-+
-+ /* Allocate buffers, if neccecary */
-+ if (!this->oob_buf) {
-+ size_t len;
-+ len = mtd->oobsize << (this->phys_erase_shift - this->page_shift);
-+ this->oob_buf = malloc (len);
-+ if (!this->oob_buf) {
-+ puts ("nand_scan(): Cannot allocate oob_buf\r\n");
-+ return -ENOMEM;
-+ }
-+ this->options |= NAND_OOBBUF_ALLOC;
-+ }
-+
-+ if (!this->data_buf) {
-+ size_t len;
-+ len = mtd->oobblock + mtd->oobsize;
-+ this->data_buf = malloc (len);
-+ if (!this->data_buf) {
-+ if (this->options & NAND_OOBBUF_ALLOC)
-+ free (this->oob_buf);
-+ puts ("nand_scan(): Cannot allocate data_buf\r\n");
-+ return -ENOMEM;
-+ }
-+ this->options |= NAND_DATABUF_ALLOC;
-+ }
-+
-+#if NAND_MULTICHIP_SUPP0RT
-+ /* Store the number of chips and calc total size for mtd */
-+ this->numchips = i;
-+ mtd->size = i * this->chipsize;
-+#else
-+ /* Store the number of chips and calc total size for mtd */
-+ this->numchips = 1;
-+ mtd->size = this->chipsize;
-+#endif
-+
-+ /* Convert chipsize to number of pages per chip -1. */
-+ this->pagemask = (this->chipsize >> this->page_shift) - 1;
-+ /* Preset the internal oob buffer */
-+ memset(this->oob_buf, 0xff, mtd->oobsize << (this->phys_erase_shift - this->page_shift));
-+
-+ /* If no default placement scheme is given, select an
-+ * appropriate one */
-+ if (!this->autooob) {
-+ /* Select the appropriate default oob placement scheme for
-+ * placement agnostic filesystems */
-+ switch (mtd->oobsize) {
-+ case 8:
-+ this->autooob = &nand_oob_8;
-+ break;
-+ case 16:
-+ this->autooob = &nand_oob_16;
-+ break;
-+ case 64:
-+ this->autooob = &nand_oob_64;
-+ break;
-+ default:
-+ puts ("No oob scheme defined for oobsize ");
-+ putx (mtd->oobsize);
-+ putnl ();
-+ BUG();
-+ }
-+ }
-+
-+ /* The number of bytes available for the filesystem to place fs dependend
-+ * oob data */
-+ mtd->oobavail = 0;
-+ for (i = 0; this->autooob->oobfree[i][1]; i++)
-+ mtd->oobavail += this->autooob->oobfree[i][1];
-+
-+ /*
-+ * check ECC mode, default to software
-+ * if 3byte/512byte hardware ECC is selected and we have 256 byte pagesize
-+ * fallback to software ECC
-+ */
-+ this->eccsize = 256; /* set default eccsize */
-+ this->eccbytes = 3;
-+
-+ switch (this->eccmode) {
-+#if NAND_HWECC_SUPPORT
-+ case NAND_ECC_HW12_2048:
-+ if (mtd->oobblock < 2048) {
-+ puts ("2048 byte HW ECC not possible on ");
-+ putx (mtd->oobblock);
-+ puts (" byte page size, fallback to SW ECC\r\n");
-+ this->eccmode = NAND_ECC_SOFT;
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ } else
-+ this->eccsize = 2048;
-+ break;
-+
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512:
-+ case NAND_ECC_HW8_512:
-+ if (mtd->oobblock == 256) {
-+ puts ("512 byte HW ECC not possible on 256 Byte pagesize, fallback to SW ECC\r\n");
-+ this->eccmode = NAND_ECC_SOFT;
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ } else
-+ this->eccsize = 512; /* set eccsize to 512 */
-+ break;
-+
-+ case NAND_ECC_HW3_256:
-+ break;
-+#endif
-+
-+ case NAND_ECC_NONE:
-+ puts ("NAND_ECC_NONE selected by board driver. This is not recommended !!\r\n");
-+ this->eccmode = NAND_ECC_NONE;
-+ break;
-+
-+ case NAND_ECC_SOFT:
-+ this->calculate_ecc = nand_calculate_ecc;
-+ this->correct_data = nand_correct_data;
-+ break;
-+
-+ default:
-+ puts ("Invalid NAND_ECC_MODE ");
-+ putx (this->eccmode);
-+ putnl ();
-+ BUG();
-+ }
-+
-+ /* Check hardware ecc function availability and adjust number of ecc bytes per
-+ * calculation step
-+ */
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ this->eccbytes += 4;
-+ case NAND_ECC_HW8_512:
-+ this->eccbytes += 2;
-+ case NAND_ECC_HW6_512:
-+ this->eccbytes += 3;
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW3_256:
-+ if (this->calculate_ecc && this->correct_data && this->enable_hwecc)
-+ break;
-+ puts ("No ECC functions supplied, Hardware ECC not possible\r\n");
-+ BUG();
-+ }
-+
-+ mtd->eccsize = this->eccsize;
-+
-+ /* Set the number of read / write steps for one page to ensure ECC generation */
-+ switch (this->eccmode) {
-+ case NAND_ECC_HW12_2048:
-+ this->eccsteps = mtd->oobblock / 2048;
-+ break;
-+ case NAND_ECC_HW3_512:
-+ case NAND_ECC_HW6_512:
-+ case NAND_ECC_HW8_512:
-+ this->eccsteps = mtd->oobblock / 512;
-+ break;
-+ case NAND_ECC_HW3_256:
-+ case NAND_ECC_SOFT:
-+ this->eccsteps = mtd->oobblock / 256;
-+ break;
-+
-+ case NAND_ECC_NONE:
-+ this->eccsteps = 1;
-+ break;
-+ }
-+
-+ /* Initialize state, waitqueue and spinlock */
-+ this->state = FL_READY;
-+#if 0
-+ init_waitqueue_head (&this->wq);
-+ spin_lock_init (&this->chip_lock);
-+#endif
-+
-+ /* De-select the device */
-+ this->select_chip(mtd, -1);
-+
-+ /* Invalidate the pagebuffer reference */
-+ this->pagebuf = -1;
-+
-+ /* Fill in remaining MTD driver data */
-+ mtd->type = MTD_NANDFLASH;
-+ mtd->flags = MTD_CAP_NANDFLASH | MTD_ECC;
-+ mtd->ecctype = MTD_ECC_SW;
-+#if NAND_ERASE_SUPPORT
-+ mtd->erase = nand_erase;
-+#endif
-+#if 0 /* not needed */
-+ mtd->point = NULL;
-+ mtd->unpoint = NULL;
-+#endif
-+ mtd->read = nand_read;
-+#if NAND_WRITE_SUPPORT
-+ mtd->write = nand_write;
-+#endif
-+ mtd->read_ecc = nand_read_ecc;
-+#if NAND_WRITE_SUPPORT
-+ mtd->write_ecc = nand_write_ecc;
-+#endif
-+ mtd->read_oob = nand_read_oob;
-+#if NAND_WRITE_SUPPORT
-+ mtd->write_oob = nand_write_oob;
-+#endif
-+#if NAND_KVEC_SUPPORT
-+ mtd->readv = NULL;
-+#endif
-+#if NAND_WRITE_SUPPORT && NAND_KVEC_SUPPORT
-+ mtd->writev = nand_writev;
-+ mtd->writev_ecc = nand_writev_ecc;
-+#endif
-+#if 0 /* not needed */
-+ mtd->sync = nand_sync;
-+ mtd->lock = NULL;
-+ mtd->unlock = NULL;
-+ mtd->suspend = nand_suspend;
-+ mtd->resume = nand_resume;
-+#endif
-+ mtd->block_isbad = nand_block_isbad;
-+#if NAND_WRITE_SUPPORT
-+ mtd->block_markbad = nand_block_markbad;
-+#endif
-+
-+ /* and make the autooob the default one */
-+ memcpy(&mtd->oobinfo, this->autooob, sizeof(mtd->oobinfo));
-+
-+#ifdef THIS_MODULE /* normally isn't for us */
-+ mtd->owner = THIS_MODULE;
-+#endif
-+
-+ /* Check, if we should skip the bad block table scan */
-+ if (this->options & NAND_SKIP_BBTSCAN)
-+ return 0;
-+
-+#if NAND_BBT_SUPPORT
-+ /* Build bad block table */
-+ return this->scan_bbt (mtd);
-+#else
-+ return -1;
-+#endif
-+}
-+
-+/**
-+ * nand_release - [NAND Interface] Free resources held by the NAND device
-+ * @mtd: MTD device structure
-+*/
-+#if 0 /* don't need it */
-+void nand_release (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+#if 0
-+#ifdef CONFIG_MTD_PARTITIONS
-+ /* Deregister partitions */
-+ del_mtd_partitions (mtd);
-+#endif
-+ /* Deregister the device */
-+ del_mtd_device (mtd);
-+#endif
-+
-+ /* Free bad block table memory */
-+ free (this->bbt);
-+ /* Buffer allocated by nand_scan ? */
-+ if (this->options & NAND_OOBBUF_ALLOC)
-+ free (this->oob_buf);
-+ /* Buffer allocated by nand_scan ? */
-+ if (this->options & NAND_DATABUF_ALLOC)
-+ free (this->data_buf);
-+}
-+#endif
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_bbt.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_bbt.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_bbt.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_bbt.c 2006-11-10 09:55:58.000000000 +0100
-@@ -0,0 +1,1151 @@
-+/*
-+ * drivers/mtd/nand_bbt.c
-+ *
-+ * Overview:
-+ * Bad block table support for the NAND driver
-+ *
-+ * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de)
-+ *
-+ * $Id: nand_bbt.c,v 1.5 2006/11/10 08:55:58 ricardw Exp $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * Description:
-+ *
-+ * When nand_scan_bbt is called, then it tries to find the bad block table
-+ * depending on the options in the bbt descriptor(s). If a bbt is found
-+ * then the contents are read and the memory based bbt is created. If a
-+ * mirrored bbt is selected then the mirror is searched too and the
-+ * versions are compared. If the mirror has a greater version number
-+ * than the mirror bbt is used to build the memory based bbt.
-+ * If the tables are not versioned, then we "or" the bad block information.
-+ * If one of the bbt's is out of date or does not exist it is (re)created.
-+ * If no bbt exists at all then the device is scanned for factory marked
-+ * good / bad blocks and the bad block tables are created.
-+ *
-+ * For manufacturer created bbts like the one found on M-SYS DOC devices
-+ * the bbt is searched and read but never created
-+ *
-+ * The autogenerated bad block table is located in the last good blocks
-+ * of the device. The table is mirrored, so it can be updated eventually.
-+ * The table is marked in the oob area with an ident pattern and a version
-+ * number which indicates which of both tables is more up to date.
-+ *
-+ * The table uses 2 bits per block
-+ * 11b: block is good
-+ * 00b: block is factory marked bad
-+ * 01b, 10b: block is marked bad due to wear
-+ *
-+ * The memory bad block table uses the following scheme:
-+ * 00b: block is good
-+ * 01b: block is marked bad due to wear
-+ * 10b: block is reserved (to protect the bbt area)
-+ * 11b: block is factory marked bad
-+ *
-+ * Multichip devices like DOC store the bad block info per floor.
-+ *
-+ * Following assumptions are made:
-+ * - bbts start at a page boundary, if autolocated on a block boundary
-+ * - the space neccecary for a bbt in FLASH does not exceed a block boundary
-+ *
-+ */
-+
-+#if 0
-+#include <linux/slab.h>
-+#endif
-+
-+#include <linux/types.h>
-+#include "mtd.h"
-+#include "nand.h"
-+#include "nand_ecc.h"
-+
-+#if 0
-+#include <linux/mtd/compatmac.h>
-+#include <linux/bitops.h>
-+#endif
-+
-+#include <linux/delay.h>
-+
-+#include "lib.h"
-+
-+
-+/**
-+ * check_pattern - [GENERIC] check if a pattern is in the buffer
-+ * @buf: the buffer to search
-+ * @len: the length of buffer to search
-+ * @paglen: the pagelength
-+ * @td: search pattern descriptor
-+ *
-+ * Check for a pattern at the given place. Used to search bad block
-+ * tables and good / bad block identifiers.
-+ * If the SCAN_EMPTY option is set then check, if all bytes except the
-+ * pattern area contain 0xff
-+ *
-+*/
-+static int check_pattern (uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
-+{
-+ int i, end = 0;
-+ uint8_t *p = buf;
-+
-+ end = paglen + td->offs;
-+ if (td->options & NAND_BBT_SCANEMPTY) {
-+ for (i = 0; i < end; i++) {
-+ if (p[i] != 0xff)
-+ return -1;
-+ }
-+ }
-+ p += end;
-+
-+ /* Compare the pattern */
-+ for (i = 0; i < td->len; i++) {
-+ if (p[i] != td->pattern[i])
-+ return -1;
-+ }
-+
-+ if (td->options & NAND_BBT_SCANEMPTY) {
-+ p += td->len;
-+ end += td->len;
-+ for (i = end; i < len; i++) {
-+ if (*p++ != 0xff)
-+ return -1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer
-+ * @buf: the buffer to search
-+ * @td: search pattern descriptor
-+ *
-+ * Check for a pattern at the given place. Used to search bad block
-+ * tables and good / bad block identifiers. Same as check_pattern, but
-+ * no optional empty check
-+ *
-+*/
-+static int check_short_pattern (uint8_t *buf, struct nand_bbt_descr *td)
-+{
-+ int i;
-+ uint8_t *p = buf;
-+
-+ /* Compare the pattern */
-+ for (i = 0; i < td->len; i++) {
-+ if (p[td->offs + i] != td->pattern[i])
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * read_bbt - [GENERIC] Read the bad block table starting from page
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @page: the starting page
-+ * @num: the number of bbt descriptors to read
-+ * @bits: number of bits per block
-+ * @offs: offset in the memory table
-+ * @reserved_block_code: Pattern to identify reserved blocks
-+ *
-+ * Read the bad block table starting from page.
-+ *
-+ */
-+static int read_bbt (struct mtd_info *mtd, uint8_t *buf, int page, int num,
-+ int bits, int offs, int reserved_block_code)
-+{
-+ int res, i, j, act = 0;
-+ struct nand_chip *this = mtd->priv;
-+ size_t retlen, len, totlen;
-+ loff_t from;
-+ uint8_t msk = (uint8_t) ((1 << bits) - 1);
-+
-+ totlen = (num * bits) >> 3;
-+ from = ((loff_t)page) << this->page_shift;
-+
-+ while (totlen) {
-+ len = min (totlen, (size_t) (1 << this->bbt_erase_shift));
-+ res = mtd->read_ecc (mtd, from, len, &retlen, buf, NULL, this->autooob);
-+ if (res < 0) {
-+ if (retlen != len) {
-+ puts ("nand_bbt: Error reading bad block table\n");
-+ return res;
-+ }
-+ puts ("nand_bbt: ECC error while reading bad block table\n");
-+ }
-+
-+ /* Analyse data */
-+ for (i = 0; i < len; i++) {
-+ uint8_t dat = buf[i];
-+ for (j = 0; j < 8; j += bits, act += 2) {
-+ uint8_t tmp = (dat >> j) & msk;
-+ if (tmp == msk)
-+ continue;
-+ if (reserved_block_code &&
-+ (tmp == reserved_block_code)) {
-+ puts ("nand_read_bbt: Reserved block at");
-+ putx (((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-+ putnl ();
-+ this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06);
-+ continue;
-+ }
-+ /* Leave it for now, if its matured we can move this
-+ * message to MTD_DEBUG_LEVEL0 */
-+ puts ("nand_read_bbt: Bad block at ");
-+ putx (((offs << 2) + (act >> 1)) << this->bbt_erase_shift);
-+ putnl ();
-+ /* Factory marked bad or worn out ? */
-+ if (tmp == 0)
-+ this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06);
-+ else
-+ this->bbt[offs + (act >> 3)] |= 0x1 << (act & 0x06);
-+ }
-+ }
-+ totlen -= len;
-+ from += len;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @td: descriptor for the bad block table
-+ * @chip: read the table for a specific chip, -1 read all chips.
-+ * Applies only if NAND_BBT_PERCHIP option is set
-+ *
-+ * Read the bad block table for all chips starting at a given page
-+ * We assume that the bbt bits are in consecutive order.
-+*/
-+static int read_abs_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int res = 0, i;
-+ int bits;
-+
-+ bits = td->options & NAND_BBT_NRBITS_MSK;
-+ if (td->options & NAND_BBT_PERCHIP) {
-+ int offs = 0;
-+ for (i = 0; i < this->numchips; i++) {
-+ if (chip == -1 || chip == i)
-+ res = read_bbt (mtd, buf, td->pages[i], this->chipsize >> this->bbt_erase_shift, bits, offs, td->reserved_block_code);
-+ if (res)
-+ return res;
-+ offs += this->chipsize >> (this->bbt_erase_shift + 2);
-+ }
-+ } else {
-+ res = read_bbt (mtd, buf, td->pages[0], mtd->size >> this->bbt_erase_shift, bits, 0, td->reserved_block_code);
-+ if (res)
-+ return res;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @td: descriptor for the bad block table
-+ * @md: descriptor for the bad block table mirror
-+ *
-+ * Read the bad block table(s) for all chips starting at a given page
-+ * We assume that the bbt bits are in consecutive order.
-+ *
-+*/
-+static int read_abs_bbts (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td,
-+ struct nand_bbt_descr *md)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ /* Read the primary version, if available */
-+ if (td->options & NAND_BBT_VERSION) {
-+ nand_read_raw (mtd, buf, td->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
-+ td->version[0] = buf[mtd->oobblock + td->veroffs];
-+ puts ("Bad block table at page ");
-+ putx (td->pages[0]);
-+ puts (", version ");
-+ putx (td->version[0]);
-+ putnl ();
-+ }
-+
-+ /* Read the mirror version, if available */
-+ if (md && (md->options & NAND_BBT_VERSION)) {
-+ nand_read_raw (mtd, buf, md->pages[0] << this->page_shift, mtd->oobblock, mtd->oobsize);
-+ md->version[0] = buf[mtd->oobblock + md->veroffs];
-+ puts ("Bad block table at page ");
-+ putx (md->pages[0]);
-+ puts (", version ");
-+ putx (md->version[0]);
-+ putnl ();
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * create_bbt - [GENERIC] Create a bad block table by scanning the device
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @bd: descriptor for the good/bad block search pattern
-+ * @chip: create the table for a specific chip, -1 read all chips.
-+ * Applies only if NAND_BBT_PERCHIP option is set
-+ *
-+ * Create a bad block table by scanning the device
-+ * for the given good/bad block identify pattern
-+ */
-+static int create_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int i, j, numblocks, len, scanlen;
-+ int startblock;
-+ loff_t from;
-+ size_t readlen, ooblen;
-+
-+ puts ("Scanning device for bad blocks\n");
-+
-+ if (bd->options & NAND_BBT_SCANALLPAGES)
-+ len = 1 << (this->bbt_erase_shift - this->page_shift);
-+ else {
-+ if (bd->options & NAND_BBT_SCAN2NDPAGE)
-+ len = 2;
-+ else
-+ len = 1;
-+ }
-+
-+ if (!(bd->options & NAND_BBT_SCANEMPTY)) {
-+ /* We need only read few bytes from the OOB area */
-+ scanlen = ooblen = 0;
-+ readlen = bd->len;
-+ } else {
-+ /* Full page content should be read */
-+ scanlen = mtd->oobblock + mtd->oobsize;
-+ readlen = len * mtd->oobblock;
-+ ooblen = len * mtd->oobsize;
-+ }
-+
-+ if (chip == -1) {
-+ /* Note that numblocks is 2 * (real numblocks) here, see i+=2 below as it
-+ * makes shifting and masking less painful */
-+ numblocks = mtd->size >> (this->bbt_erase_shift - 1);
-+ startblock = 0;
-+ from = 0;
-+ } else {
-+ if (chip >= this->numchips) {
-+ puts ("create_bbt(): chipnr (");
-+ putx (chip + 1);
-+ puts (" > available chips ");
-+ putx (this->numchips);
-+ putnl ();
-+ return -EINVAL;
-+ }
-+ numblocks = this->chipsize >> (this->bbt_erase_shift - 1);
-+ startblock = chip * numblocks;
-+ numblocks += startblock;
-+ from = startblock << (this->bbt_erase_shift - 1);
-+ }
-+
-+ for (i = startblock; i < numblocks;) {
-+ int ret;
-+
-+ if (bd->options & NAND_BBT_SCANEMPTY)
-+ if ((ret = nand_read_raw (mtd, buf, from, readlen, ooblen)))
-+ return ret;
-+
-+ for (j = 0; j < len; j++) {
-+ if (!(bd->options & NAND_BBT_SCANEMPTY)) {
-+ size_t retlen;
-+
-+ /* Read the full oob until read_oob is fixed to
-+ * handle single byte reads for 16 bit buswidth */
-+ ret = mtd->read_oob(mtd, from + j * mtd->oobblock,
-+ mtd->oobsize, &retlen, buf);
-+ if (ret)
-+ return ret;
-+
-+ if (check_short_pattern (buf, bd)) {
-+ this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-+ puts ("Bad eraseblock ");
-+ putx (i >> 1);
-+ puts (" at ");
-+ putx ((unsigned int) from);
-+ putnl ();
-+ break;
-+ }
-+ } else {
-+ if (check_pattern (&buf[j * scanlen], scanlen, mtd->oobblock, bd)) {
-+ this->bbt[i >> 3] |= 0x03 << (i & 0x6);
-+ puts ("Bad eraseblock ");
-+ putx (i >> 1);
-+ puts (" at ");
-+ putx ((unsigned int) from);
-+ putnl ();
-+ break;
-+ }
-+ }
-+ }
-+ i += 2;
-+ from += (1 << this->bbt_erase_shift);
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * search_bbt - [GENERIC] scan the device for a specific bad block table
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @td: descriptor for the bad block table
-+ *
-+ * Read the bad block table by searching for a given ident pattern.
-+ * Search is preformed either from the beginning up or from the end of
-+ * the device downwards. The search starts always at the start of a
-+ * block.
-+ * If the option NAND_BBT_PERCHIP is given, each chip is searched
-+ * for a bbt, which contains the bad block information of this chip.
-+ * This is neccecary to provide support for certain DOC devices.
-+ *
-+ * The bbt ident pattern resides in the oob area of the first page
-+ * in a block.
-+ */
-+static int search_bbt (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int i, chips;
-+ int bits, startblock, block, dir;
-+ int scanlen = mtd->oobblock + mtd->oobsize;
-+ int bbtblocks;
-+
-+ /* Search direction top -> down ? */
-+ if (td->options & NAND_BBT_LASTBLOCK) {
-+ startblock = (mtd->size >> this->bbt_erase_shift) -1;
-+ dir = -1;
-+ } else {
-+ startblock = 0;
-+ dir = 1;
-+ }
-+
-+ /* Do we have a bbt per chip ? */
-+ if (td->options & NAND_BBT_PERCHIP) {
-+ chips = this->numchips;
-+ bbtblocks = this->chipsize >> this->bbt_erase_shift;
-+ startblock &= bbtblocks - 1;
-+ } else {
-+ chips = 1;
-+ bbtblocks = mtd->size >> this->bbt_erase_shift;
-+ }
-+
-+ /* Number of bits for each erase block in the bbt */
-+ bits = td->options & NAND_BBT_NRBITS_MSK;
-+
-+ for (i = 0; i < chips; i++) {
-+ /* Reset version information */
-+ td->version[i] = 0;
-+ td->pages[i] = -1;
-+ /* Scan the maximum number of blocks */
-+ for (block = 0; block < td->maxblocks; block++) {
-+ int actblock = startblock + dir * block;
-+ /* Read first page */
-+ nand_read_raw (mtd, buf, actblock << this->bbt_erase_shift, mtd->oobblock, mtd->oobsize);
-+ if (!check_pattern(buf, scanlen, mtd->oobblock, td)) {
-+ td->pages[i] = actblock << (this->bbt_erase_shift - this->page_shift);
-+ if (td->options & NAND_BBT_VERSION) {
-+ td->version[i] = buf[mtd->oobblock + td->veroffs];
-+ }
-+ break;
-+ }
-+ }
-+ startblock += this->chipsize >> this->bbt_erase_shift;
-+ }
-+ /* Check, if we found a bbt for each requested chip */
-+ for (i = 0; i < chips; i++) {
-+ if (td->pages[i] == -1) {
-+ puts ("Bad block table not found for chip ");
-+ putx (i);
-+ putnl ();
-+ } else {
-+ puts ("Bad block table found at page ");
-+ putx (td->pages[i]);
-+ puts (" version ");
-+ putx (td->version[i]);
-+ putnl ();
-+ }
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * search_read_bbts - [GENERIC] scan the device for bad block table(s)
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @td: descriptor for the bad block table
-+ * @md: descriptor for the bad block table mirror
-+ *
-+ * Search and read the bad block table(s)
-+*/
-+static int search_read_bbts (struct mtd_info *mtd, uint8_t *buf,
-+ struct nand_bbt_descr *td, struct nand_bbt_descr *md)
-+{
-+ /* Search the primary table */
-+ search_bbt (mtd, buf, td);
-+
-+ /* Search the mirror table */
-+ if (md)
-+ search_bbt (mtd, buf, md);
-+
-+ /* Force result check */
-+ return 1;
-+}
-+
-+
-+/**
-+ * write_bbt - [GENERIC] (Re)write the bad block table
-+ *
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @td: descriptor for the bad block table
-+ * @md: descriptor for the bad block table mirror
-+ * @chipsel: selector for a specific chip, -1 for all
-+ *
-+ * (Re)write the bad block table
-+ *
-+*/
-+static int write_bbt (struct mtd_info *mtd, uint8_t *buf,
-+ struct nand_bbt_descr *td, struct nand_bbt_descr *md, int chipsel)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ struct nand_oobinfo oobinfo;
-+ struct erase_info einfo;
-+ int i, j, res, chip = 0;
-+ int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
-+ int nrchips, bbtoffs, pageoffs;
-+ uint8_t msk[4];
-+ uint8_t rcode = td->reserved_block_code;
-+ size_t retlen, len = 0;
-+ loff_t to;
-+
-+ if (!rcode)
-+ rcode = 0xff;
-+ /* Write bad block table per chip rather than per device ? */
-+ if (td->options & NAND_BBT_PERCHIP) {
-+ numblocks = (int) (this->chipsize >> this->bbt_erase_shift);
-+ /* Full device write or specific chip ? */
-+ if (chipsel == -1) {
-+ nrchips = this->numchips;
-+ } else {
-+ nrchips = chipsel + 1;
-+ chip = chipsel;
-+ }
-+ } else {
-+ numblocks = (int) (mtd->size >> this->bbt_erase_shift);
-+ nrchips = 1;
-+ }
-+
-+ /* Loop through the chips */
-+ for (; chip < nrchips; chip++) {
-+
-+ /* There was already a version of the table, reuse the page
-+ * This applies for absolute placement too, as we have the
-+ * page nr. in td->pages.
-+ */
-+ if (td->pages[chip] != -1) {
-+ page = td->pages[chip];
-+ goto write;
-+ }
-+
-+ /* Automatic placement of the bad block table */
-+ /* Search direction top -> down ? */
-+ if (td->options & NAND_BBT_LASTBLOCK) {
-+ startblock = numblocks * (chip + 1) - 1;
-+ dir = -1;
-+ } else {
-+ startblock = chip * numblocks;
-+ dir = 1;
-+ }
-+
-+ for (i = 0; i < td->maxblocks; i++) {
-+ int block = startblock + dir * i;
-+ /* Check, if the block is bad */
-+ switch ((this->bbt[block >> 2] >> (2 * (block & 0x03))) & 0x03) {
-+ case 0x01:
-+ case 0x03:
-+ continue;
-+ }
-+ page = block << (this->bbt_erase_shift - this->page_shift);
-+ /* Check, if the block is used by the mirror table */
-+ if (!md || md->pages[chip] != page)
-+ goto write;
-+ }
-+ puts ("No space left to write bad block table\r\n");
-+ return -ENOSPC;
-+write:
-+
-+ /* Set up shift count and masks for the flash table */
-+ bits = td->options & NAND_BBT_NRBITS_MSK;
-+ switch (bits) {
-+ case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x01; break;
-+ case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01; msk[2] = ~rcode; msk[3] = 0x03; break;
-+ case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C; msk[2] = ~rcode; msk[3] = 0x0f; break;
-+ case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F; msk[2] = ~rcode; msk[3] = 0xff; break;
-+ default: return -EINVAL;
-+ }
-+
-+ bbtoffs = chip * (numblocks >> 2);
-+
-+ to = ((loff_t) page) << this->page_shift;
-+
-+ memcpy (&oobinfo, this->autooob, sizeof(oobinfo));
-+ oobinfo.useecc = MTD_NANDECC_PLACEONLY;
-+
-+ /* Must we save the block contents ? */
-+ if (td->options & NAND_BBT_SAVECONTENT) {
-+ /* Make it block aligned */
-+ to &= ~((loff_t) ((1 << this->bbt_erase_shift) - 1));
-+ len = 1 << this->bbt_erase_shift;
-+ res = mtd->read_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
-+ if (res < 0) {
-+ if (retlen != len) {
-+ puts ("nand_bbt: Error reading block for writing the bad block table\r\n");
-+ return res;
-+ }
-+ puts ("nand_bbt: ECC error while reading block for writing bad block table\r\n");
-+ }
-+ /* Calc the byte offset in the buffer */
-+ pageoffs = page - (int)(to >> this->page_shift);
-+ offs = pageoffs << this->page_shift;
-+ /* Preset the bbt area with 0xff */
-+ memset (&buf[offs], 0xff, (size_t)(numblocks >> sft));
-+ /* Preset the bbt's oob area with 0xff */
-+ memset (&buf[len + pageoffs * mtd->oobsize], 0xff,
-+ ((len >> this->page_shift) - pageoffs) * mtd->oobsize);
-+ if (td->options & NAND_BBT_VERSION) {
-+ buf[len + (pageoffs * mtd->oobsize) + td->veroffs] = td->version[chip];
-+ }
-+ } else {
-+ /* Calc length */
-+ len = (size_t) (numblocks >> sft);
-+ /* Make it page aligned ! */
-+ len = (len + (mtd->oobblock-1)) & ~(mtd->oobblock-1);
-+ /* Preset the buffer with 0xff */
-+ memset (buf, 0xff, len + (len >> this->page_shift) * mtd->oobsize);
-+ offs = 0;
-+ /* Pattern is located in oob area of first page */
-+ memcpy (&buf[len + td->offs], td->pattern, td->len);
-+ if (td->options & NAND_BBT_VERSION) {
-+ buf[len + td->veroffs] = td->version[chip];
-+ }
-+ }
-+
-+ /* walk through the memory table */
-+ for (i = 0; i < numblocks; ) {
-+ uint8_t dat;
-+ dat = this->bbt[bbtoffs + (i >> 2)];
-+ for (j = 0; j < 4; j++ , i++) {
-+ int sftcnt = (i << (3 - sft)) & sftmsk;
-+ /* Do not store the reserved bbt blocks ! */
-+ buf[offs + (i >> sft)] &= ~(msk[dat & 0x03] << sftcnt);
-+ dat >>= 2;
-+ }
-+ }
-+
-+ memset (&einfo, 0, sizeof (einfo));
-+ einfo.mtd = mtd;
-+ einfo.addr = (unsigned long) to;
-+ einfo.len = 1 << this->bbt_erase_shift;
-+ res = nand_erase_nand (mtd, &einfo, 1);
-+ if (res < 0) {
-+ puts ("nand_bbt: Error during block erase: ");
-+ putx (res);
-+ putnl();
-+ return res;
-+ }
-+
-+ res = mtd->write_ecc (mtd, to, len, &retlen, buf, &buf[len], &oobinfo);
-+ if (res < 0) {
-+ puts ("nand_bbt: Error while writing bad block table ");
-+ putx (res);
-+ putnl ();
-+ return res;
-+ }
-+ puts ("Bad block table written to ");
-+ putx ((unsigned int) to);
-+ puts (", version ");
-+ putx (td->version[chip]);
-+ putnl ();
-+
-+ /* Mark it as used */
-+ td->pages[chip] = page;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * nand_memory_bbt - [GENERIC] create a memory based bad block table
-+ * @mtd: MTD device structure
-+ * @bd: descriptor for the good/bad block search pattern
-+ *
-+ * The function creates a memory based bbt by scanning the device
-+ * for manufacturer / software marked good / bad blocks
-+*/
-+static inline int nand_memory_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ bd->options &= ~NAND_BBT_SCANEMPTY;
-+ return create_bbt (mtd, this->data_buf, bd, -1);
-+}
-+
-+/**
-+ * check_create - [GENERIC] create and write bbt(s) if neccecary
-+ * @mtd: MTD device structure
-+ * @buf: temporary buffer
-+ * @bd: descriptor for the good/bad block search pattern
-+ *
-+ * The function checks the results of the previous call to read_bbt
-+ * and creates / updates the bbt(s) if neccecary
-+ * Creation is neccecary if no bbt was found for the chip/device
-+ * Update is neccecary if one of the tables is missing or the
-+ * version nr. of one table is less than the other
-+*/
-+static int check_create (struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
-+{
-+ int i, chips, writeops, chipsel, res;
-+ struct nand_chip *this = mtd->priv;
-+ struct nand_bbt_descr *td = this->bbt_td;
-+ struct nand_bbt_descr *md = this->bbt_md;
-+ struct nand_bbt_descr *rd, *rd2;
-+
-+ /* Do we have a bbt per chip ? */
-+ if (td->options & NAND_BBT_PERCHIP)
-+ chips = this->numchips;
-+ else
-+ chips = 1;
-+
-+ for (i = 0; i < chips; i++) {
-+ writeops = 0;
-+ rd = NULL;
-+ rd2 = NULL;
-+ /* Per chip or per device ? */
-+ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
-+ /* Mirrored table avilable ? */
-+ if (md) {
-+ if (td->pages[i] == -1 && md->pages[i] == -1) {
-+ writeops = 0x03;
-+ goto create;
-+ }
-+
-+ if (td->pages[i] == -1) {
-+ rd = md;
-+ td->version[i] = md->version[i];
-+ writeops = 1;
-+ goto writecheck;
-+ }
-+
-+ if (md->pages[i] == -1) {
-+ rd = td;
-+ md->version[i] = td->version[i];
-+ writeops = 2;
-+ goto writecheck;
-+ }
-+
-+ if (td->version[i] == md->version[i]) {
-+ rd = td;
-+ if (!(td->options & NAND_BBT_VERSION))
-+ rd2 = md;
-+ goto writecheck;
-+ }
-+
-+ if (((int8_t) (td->version[i] - md->version[i])) > 0) {
-+ rd = td;
-+ md->version[i] = td->version[i];
-+ writeops = 2;
-+ } else {
-+ rd = md;
-+ td->version[i] = md->version[i];
-+ writeops = 1;
-+ }
-+
-+ goto writecheck;
-+
-+ } else {
-+ if (td->pages[i] == -1) {
-+ writeops = 0x01;
-+ goto create;
-+ }
-+ rd = td;
-+ goto writecheck;
-+ }
-+create:
-+ /* Create the bad block table by scanning the device ? */
-+ if (!(td->options & NAND_BBT_CREATE))
-+ continue;
-+
-+ /* Create the table in memory by scanning the chip(s) */
-+ create_bbt (mtd, buf, bd, chipsel);
-+
-+ td->version[i] = 1;
-+ if (md)
-+ md->version[i] = 1;
-+writecheck:
-+ /* read back first ? */
-+ if (rd)
-+ read_abs_bbt (mtd, buf, rd, chipsel);
-+ /* If they weren't versioned, read both. */
-+ if (rd2)
-+ read_abs_bbt (mtd, buf, rd2, chipsel);
-+
-+ /* Write the bad block table to the device ? */
-+ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
-+ res = write_bbt (mtd, buf, td, md, chipsel);
-+ if (res < 0)
-+ return res;
-+ }
-+
-+ /* Write the mirror bad block table to the device ? */
-+ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
-+ res = write_bbt (mtd, buf, md, td, chipsel);
-+ if (res < 0)
-+ return res;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * mark_bbt_regions - [GENERIC] mark the bad block table regions
-+ * @mtd: MTD device structure
-+ * @td: bad block table descriptor
-+ *
-+ * The bad block table regions are marked as "bad" to prevent
-+ * accidental erasures / writes. The regions are identified by
-+ * the mark 0x02.
-+*/
-+static void mark_bbt_region (struct mtd_info *mtd, struct nand_bbt_descr *td)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int i, j, chips, block, nrblocks, update;
-+ uint8_t oldval, newval;
-+
-+ /* Do we have a bbt per chip ? */
-+ if (td->options & NAND_BBT_PERCHIP) {
-+ chips = this->numchips;
-+ nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
-+ } else {
-+ chips = 1;
-+ nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
-+ }
-+
-+ for (i = 0; i < chips; i++) {
-+ if ((td->options & NAND_BBT_ABSPAGE) ||
-+ !(td->options & NAND_BBT_WRITE)) {
-+ if (td->pages[i] == -1) continue;
-+ block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
-+ block <<= 1;
-+ oldval = this->bbt[(block >> 3)];
-+ newval = oldval | (0x2 << (block & 0x06));
-+ this->bbt[(block >> 3)] = newval;
-+ if ((oldval != newval) && td->reserved_block_code)
-+ nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1));
-+ continue;
-+ }
-+ update = 0;
-+ if (td->options & NAND_BBT_LASTBLOCK)
-+ block = ((i + 1) * nrblocks) - td->maxblocks;
-+ else
-+ block = i * nrblocks;
-+ block <<= 1;
-+ for (j = 0; j < td->maxblocks; j++) {
-+ oldval = this->bbt[(block >> 3)];
-+ newval = oldval | (0x2 << (block & 0x06));
-+ this->bbt[(block >> 3)] = newval;
-+ if (oldval != newval) update = 1;
-+ block += 2;
-+ }
-+ /* If we want reserved blocks to be recorded to flash, and some
-+ new ones have been marked, then we need to update the stored
-+ bbts. This should only happen once. */
-+ if (update && td->reserved_block_code)
-+ nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1));
-+ }
-+}
-+
-+/**
-+ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
-+ * @mtd: MTD device structure
-+ * @bd: descriptor for the good/bad block search pattern
-+ *
-+ * The function checks, if a bad block table(s) is/are already
-+ * available. If not it scans the device for manufacturer
-+ * marked good / bad blocks and writes the bad block table(s) to
-+ * the selected place.
-+ *
-+ * The bad block table memory is allocated here. It must be freed
-+ * by calling the nand_free_bbt function.
-+ *
-+*/
-+int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int len, res = 0;
-+ uint8_t *buf;
-+ struct nand_bbt_descr *td = this->bbt_td;
-+ struct nand_bbt_descr *md = this->bbt_md;
-+
-+ len = mtd->size >> (this->bbt_erase_shift + 2);
-+ /* Allocate memory (2bit per block) */
-+ this->bbt = malloc (len);
-+ if (!this->bbt) {
-+ puts ("nand_scan_bbt: Out of memory\r\n");
-+ return -ENOMEM;
-+ }
-+ /* Clear the memory bad block table */
-+ memset (this->bbt, 0x00, len);
-+
-+ /* If no primary table decriptor is given, scan the device
-+ * to build a memory based bad block table
-+ */
-+ if (!td) {
-+ if ((res = nand_memory_bbt(mtd, bd))) {
-+ puts ("nand_bbt: Can't scan flash and build the RAM-based BBT\r\n");
-+ free (this->bbt);
-+ this->bbt = NULL;
-+ }
-+ return res;
-+ }
-+
-+ /* Allocate a temporary buffer for one eraseblock incl. oob */
-+ len = (1 << this->bbt_erase_shift);
-+ len += (len >> this->page_shift) * mtd->oobsize;
-+ buf = malloc (len);
-+ if (!buf) {
-+ puts ("nand_bbt: Out of memory\r\n");
-+ free (this->bbt);
-+ this->bbt = NULL;
-+ return -ENOMEM;
-+ }
-+
-+ /* Is the bbt at a given page ? */
-+ if (td->options & NAND_BBT_ABSPAGE) {
-+ res = read_abs_bbts (mtd, buf, td, md);
-+ } else {
-+ /* Search the bad block table using a pattern in oob */
-+ res = search_read_bbts (mtd, buf, td, md);
-+ }
-+
-+ if (res)
-+ res = check_create (mtd, buf, bd);
-+
-+ /* Prevent the bbt regions from erasing / writing */
-+ mark_bbt_region (mtd, td);
-+ if (md)
-+ mark_bbt_region (mtd, md);
-+
-+ free (buf);
-+ return res;
-+}
-+
-+
-+/**
-+ * nand_update_bbt - [NAND Interface] update bad block table(s)
-+ * @mtd: MTD device structure
-+ * @offs: the offset of the newly marked block
-+ *
-+ * The function updates the bad block table(s)
-+*/
-+int nand_update_bbt (struct mtd_info *mtd, loff_t offs)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int len, res = 0, writeops = 0;
-+ int chip, chipsel;
-+ uint8_t *buf;
-+ struct nand_bbt_descr *td = this->bbt_td;
-+ struct nand_bbt_descr *md = this->bbt_md;
-+
-+ if (!this->bbt || !td)
-+ return -EINVAL;
-+
-+ len = mtd->size >> (this->bbt_erase_shift + 2);
-+ /* Allocate a temporary buffer for one eraseblock incl. oob */
-+ len = (1 << this->bbt_erase_shift);
-+ len += (len >> this->page_shift) * mtd->oobsize;
-+ buf = malloc (len);
-+ if (!buf) {
-+ puts ("nand_update_bbt: Out of memory\r\n");
-+ return -ENOMEM;
-+ }
-+
-+ writeops = md != NULL ? 0x03 : 0x01;
-+
-+ /* Do we have a bbt per chip ? */
-+ if (td->options & NAND_BBT_PERCHIP) {
-+ chip = (int) (offs >> this->chip_shift);
-+ chipsel = chip;
-+ } else {
-+ chip = 0;
-+ chipsel = -1;
-+ }
-+
-+ td->version[chip]++;
-+ if (md)
-+ md->version[chip]++;
-+
-+ /* Write the bad block table to the device ? */
-+ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
-+ res = write_bbt (mtd, buf, td, md, chipsel);
-+ if (res < 0)
-+ goto out;
-+ }
-+ /* Write the mirror bad block table to the device ? */
-+ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
-+ res = write_bbt (mtd, buf, md, td, chipsel);
-+ }
-+
-+out:
-+ free (buf);
-+ return res;
-+}
-+
-+/* Define some generic bad / good block scan pattern which are used
-+ * while scanning a device for factory marked good / bad blocks. */
-+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-+
-+static struct nand_bbt_descr smallpage_memorybased = {
-+ .options = NAND_BBT_SCAN2NDPAGE,
-+ .offs = 5,
-+ .len = 1,
-+ .pattern = scan_ff_pattern
-+};
-+
-+static struct nand_bbt_descr largepage_memorybased = {
-+ .options = 0,
-+ .offs = 0,
-+ .len = 2,
-+ .pattern = scan_ff_pattern
-+};
-+
-+static struct nand_bbt_descr smallpage_flashbased = {
-+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
-+ .offs = 5,
-+ .len = 1,
-+ .pattern = scan_ff_pattern
-+};
-+
-+static struct nand_bbt_descr largepage_flashbased = {
-+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
-+ .offs = 0,
-+ .len = 2,
-+ .pattern = scan_ff_pattern
-+};
-+
-+static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 };
-+
-+static struct nand_bbt_descr agand_flashbased = {
-+ .options = NAND_BBT_SCANEMPTY | NAND_BBT_SCANALLPAGES,
-+ .offs = 0x20,
-+ .len = 6,
-+ .pattern = scan_agand_pattern
-+};
-+
-+/* Generic flash bbt decriptors
-+*/
-+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
-+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
-+
-+static struct nand_bbt_descr bbt_main_descr = {
-+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-+ .offs = 8,
-+ .len = 4,
-+ .veroffs = 12,
-+ .maxblocks = 4,
-+ .pattern = bbt_pattern
-+};
-+
-+static struct nand_bbt_descr bbt_mirror_descr = {
-+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
-+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
-+ .offs = 8,
-+ .len = 4,
-+ .veroffs = 12,
-+ .maxblocks = 4,
-+ .pattern = mirror_pattern
-+};
-+
-+/**
-+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
-+ * @mtd: MTD device structure
-+ *
-+ * This function selects the default bad block table
-+ * support for the device and calls the nand_scan_bbt function
-+ *
-+*/
-+int nand_default_bbt (struct mtd_info *mtd)
-+{
-+ struct nand_chip *this = mtd->priv;
-+
-+ /* Default for AG-AND. We must use a flash based
-+ * bad block table as the devices have factory marked
-+ * _good_ blocks. Erasing those blocks leads to loss
-+ * of the good / bad information, so we _must_ store
-+ * this information in a good / bad table during
-+ * startup
-+ */
-+ if (this->options & NAND_IS_AND) {
-+ /* Use the default pattern descriptors */
-+ if (!this->bbt_td) {
-+ this->bbt_td = &bbt_main_descr;
-+ this->bbt_md = &bbt_mirror_descr;
-+ }
-+ this->options |= NAND_USE_FLASH_BBT;
-+ return nand_scan_bbt (mtd, &agand_flashbased);
-+ }
-+
-+
-+ /* Is a flash based bad block table requested ? */
-+ if (this->options & NAND_USE_FLASH_BBT) {
-+ /* Use the default pattern descriptors */
-+ if (!this->bbt_td) {
-+ this->bbt_td = &bbt_main_descr;
-+ this->bbt_md = &bbt_mirror_descr;
-+ }
-+ if (!this->badblock_pattern) {
-+ this->badblock_pattern = (mtd->oobblock > 512) ?
-+ &largepage_flashbased : &smallpage_flashbased;
-+ }
-+ } else {
-+ this->bbt_td = NULL;
-+ this->bbt_md = NULL;
-+ if (!this->badblock_pattern) {
-+ this->badblock_pattern = (mtd->oobblock > 512) ?
-+ &largepage_memorybased : &smallpage_memorybased;
-+ }
-+ }
-+ return nand_scan_bbt (mtd, this->badblock_pattern);
-+}
-+
-+/**
-+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad
-+ * @mtd: MTD device structure
-+ * @offs: offset in the device
-+ * @allowbbt: allow access to bad block table region
-+ *
-+*/
-+int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt)
-+{
-+ struct nand_chip *this = mtd->priv;
-+ int block;
-+ uint8_t res;
-+
-+ /* Get block number * 2 */
-+ block = (int) (offs >> (this->bbt_erase_shift - 1));
-+ res = (this->bbt[block >> 3] >> (block & 0x06)) & 0x03;
-+
-+ DEBUG (MTD_DEBUG_LEVEL2, "nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
-+ (unsigned int)offs, block >> 1, res);
-+
-+ switch ((int)res) {
-+ case 0x00: return 0;
-+ case 0x01: return 1;
-+ case 0x02: return allowbbt ? 0 : 1;
-+ }
-+ return 1;
-+}
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.c 2006-08-04 16:38:14.000000000 +0200
-@@ -0,0 +1,246 @@
-+/*
-+ * This file contains an ECC algorithm from Toshiba that detects and
-+ * corrects 1 bit errors in a 256 byte block of data.
-+ *
-+ * Taken from drivers/mtd/nand/nand_ecc.c, modified for
-+ * NAND flash boot on Etrax FS.
-+ *
-+ * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
-+ * Toshiba America Electronics Components, Inc.
-+ *
-+ * $Id: nand_ecc.c,v 1.1 2006/08/04 14:38:14 ricardw Exp $
-+ *
-+ * This file is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 or (at your option) any
-+ * later version.
-+ *
-+ * This file is distributed in the hope that it will be useful, but WITHOUT
-+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-+ * for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License along
-+ * with this file; if not, write to the Free Software Foundation, Inc.,
-+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-+ *
-+ * As a special exception, if other files instantiate templates or use
-+ * macros or inline functions from these files, or you compile these
-+ * files and link them with other works to produce a work based on these
-+ * files, these files do not by themselves cause the resulting work to be
-+ * covered by the GNU General Public License. However the source code for
-+ * these files must still be made available in accordance with section (3)
-+ * of the GNU General Public License.
-+ *
-+ * This exception does not invalidate any other reasons why a work based on
-+ * this file might be covered by the GNU General Public License.
-+ */
-+
-+#include <linux/types.h>
-+#if 0
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#endif
-+#include "nand_ecc.h"
-+
-+/*
-+ * Pre-calculated 256-way 1 byte column parity
-+ */
-+static const u_char nand_ecc_precalc_table[] = {
-+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
-+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
-+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
-+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
-+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
-+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
-+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
-+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
-+ 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
-+ 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
-+ 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
-+ 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
-+ 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
-+ 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
-+ 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
-+ 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
-+};
-+
-+
-+/**
-+ * nand_trans_result - [GENERIC] create non-inverted ECC
-+ * @reg2: line parity reg 2
-+ * @reg3: line parity reg 3
-+ * @ecc_code: ecc
-+ *
-+ * Creates non-inverted ECC code from line parity
-+ */
-+static void nand_trans_result(u_char reg2, u_char reg3,
-+ u_char *ecc_code)
-+{
-+ u_char a, b, i, tmp1, tmp2;
-+
-+ /* Initialize variables */
-+ a = b = 0x80;
-+ tmp1 = tmp2 = 0;
-+
-+ /* Calculate first ECC byte */
-+ for (i = 0; i < 4; i++) {
-+ if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
-+ tmp1 |= b;
-+ b >>= 1;
-+ if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
-+ tmp1 |= b;
-+ b >>= 1;
-+ a >>= 1;
-+ }
-+
-+ /* Calculate second ECC byte */
-+ b = 0x80;
-+ for (i = 0; i < 4; i++) {
-+ if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
-+ tmp2 |= b;
-+ b >>= 1;
-+ if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
-+ tmp2 |= b;
-+ b >>= 1;
-+ a >>= 1;
-+ }
-+
-+ /* Store two of the ECC bytes */
-+ ecc_code[0] = tmp1;
-+ ecc_code[1] = tmp2;
-+}
-+
-+/**
-+ * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block
-+ * @mtd: MTD block structure
-+ * @dat: raw data
-+ * @ecc_code: buffer for ECC
-+ */
-+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
-+{
-+ u_char idx, reg1, reg2, reg3;
-+ int j;
-+
-+ /* Initialize variables */
-+ reg1 = reg2 = reg3 = 0;
-+ ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
-+
-+ /* Build up column parity */
-+ for(j = 0; j < 256; j++) {
-+
-+ /* Get CP0 - CP5 from table */
-+ idx = nand_ecc_precalc_table[dat[j]];
-+ reg1 ^= (idx & 0x3f);
-+
-+ /* All bit XOR = 1 ? */
-+ if (idx & 0x40) {
-+ reg3 ^= (u_char) j;
-+ reg2 ^= ~((u_char) j);
-+ }
-+ }
-+
-+ /* Create non-inverted ECC code from line parity */
-+ nand_trans_result(reg2, reg3, ecc_code);
-+
-+ /* Calculate final ECC code */
-+ ecc_code[0] = ~ecc_code[0];
-+ ecc_code[1] = ~ecc_code[1];
-+ ecc_code[2] = ((~reg1) << 2) | 0x03;
-+ return 0;
-+}
-+
-+/**
-+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
-+ * @mtd: MTD block structure
-+ * @dat: raw data read from the chip
-+ * @read_ecc: ECC from the chip
-+ * @calc_ecc: the ECC calculated from raw data
-+ *
-+ * Detect and correct a 1 bit error for 256 byte block
-+ */
-+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-+{
-+ u_char a, b, c, d1, d2, d3, add, bit, i;
-+
-+ /* Do error detection */
-+ d1 = calc_ecc[0] ^ read_ecc[0];
-+ d2 = calc_ecc[1] ^ read_ecc[1];
-+ d3 = calc_ecc[2] ^ read_ecc[2];
-+
-+ if ((d1 | d2 | d3) == 0) {
-+ /* No errors */
-+ return 0;
-+ }
-+ else {
-+ a = (d1 ^ (d1 >> 1)) & 0x55;
-+ b = (d2 ^ (d2 >> 1)) & 0x55;
-+ c = (d3 ^ (d3 >> 1)) & 0x54;
-+
-+ /* Found and will correct single bit error in the data */
-+ if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
-+ c = 0x80;
-+ add = 0;
-+ a = 0x80;
-+ for (i=0; i<4; i++) {
-+ if (d1 & c)
-+ add |= a;
-+ c >>= 2;
-+ a >>= 1;
-+ }
-+ c = 0x80;
-+ for (i=0; i<4; i++) {
-+ if (d2 & c)
-+ add |= a;
-+ c >>= 2;
-+ a >>= 1;
-+ }
-+ bit = 0;
-+ b = 0x04;
-+ c = 0x80;
-+ for (i=0; i<3; i++) {
-+ if (d3 & c)
-+ bit |= b;
-+ c >>= 2;
-+ b >>= 1;
-+ }
-+ b = 0x01;
-+ a = dat[add];
-+ a ^= (b << bit);
-+ dat[add] = a;
-+ return 1;
-+ }
-+ else {
-+ i = 0;
-+ while (d1) {
-+ if (d1 & 0x01)
-+ ++i;
-+ d1 >>= 1;
-+ }
-+ while (d2) {
-+ if (d2 & 0x01)
-+ ++i;
-+ d2 >>= 1;
-+ }
-+ while (d3) {
-+ if (d3 & 0x01)
-+ ++i;
-+ d3 >>= 1;
-+ }
-+ if (i == 1) {
-+ /* ECC Code Error Correction */
-+ read_ecc[0] = calc_ecc[0];
-+ read_ecc[1] = calc_ecc[1];
-+ read_ecc[2] = calc_ecc[2];
-+ return 2;
-+ }
-+ else {
-+ /* Uncorrectable Error */
-+ return -1;
-+ }
-+ }
-+ }
-+
-+ /* Should never happen */
-+ return -1;
-+}
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.h linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ecc.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ecc.h 2006-08-04 16:38:14.000000000 +0200
-@@ -0,0 +1,30 @@
-+/*
-+ * drivers/mtd/nand_ecc.h
-+ *
-+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
-+ *
-+ * $Id: nand_ecc.h,v 1.1 2006/08/04 14:38:14 ricardw Exp $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This file is the header for the ECC algorithm.
-+ */
-+
-+#ifndef __MTD_NAND_ECC_H__
-+#define __MTD_NAND_ECC_H__
-+
-+struct mtd_info;
-+
-+/*
-+ * Calculate 3 byte ECC code for 256 byte block
-+ */
-+int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
-+
-+/*
-+ * Detect and correct a 1 bit error for 256 byte block
-+ */
-+int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-+
-+#endif /* __MTD_NAND_ECC_H__ */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ids.c linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ids.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/nand_ids.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/nand_ids.c 2006-08-04 16:38:14.000000000 +0200
-@@ -0,0 +1,133 @@
-+/*
-+ * drivers/mtd/nandids.c
-+ *
-+ * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
-+ *
-+ * $Id: nand_ids.c,v 1.1 2006/08/04 14:38:14 ricardw Exp $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#if 0
-+#include <linux/module.h>
-+#endif
-+
-+#include "nand.h"
-+/*
-+* Chip ID list
-+*
-+* Name. ID code, pagesize, chipsize in MegaByte, eraseblock size,
-+* options
-+*
-+* Pagesize; 0, 256, 512
-+* 0 get this information from the extended chip ID
-++ 256 256 Byte page size
-+* 512 512 Byte page size
-+*/
-+struct nand_flash_dev nand_flash_ids[] = {
-+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
-+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
-+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
-+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
-+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
-+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
-+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
-+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
-+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
-+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
-+
-+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
-+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
-+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
-+
-+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
-+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
-+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
-+
-+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
-+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
-+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
-+
-+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
-+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
-+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
-+
-+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
-+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
-+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
-+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
-+
-+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
-+
-+ /* These are the new chips with large page size. The pagesize
-+ * and the erasesize is determined from the extended id bytes
-+ */
-+ /*512 Megabit */
-+ {"NAND 64MiB 1,8V 8-bit", 0xA2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 64MiB 3,3V 8-bit", 0xF2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 64MiB 1,8V 16-bit", 0xB2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+ {"NAND 64MiB 3,3V 16-bit", 0xC2, 0, 64, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+
-+ /* 1 Gigabit */
-+ {"NAND 128MiB 1,8V 8-bit", 0xA1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 128MiB 3,3V 8-bit", 0xF1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 128MiB 1,8V 16-bit", 0xB1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+ {"NAND 128MiB 3,3V 16-bit", 0xC1, 0, 128, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+
-+ /* 2 Gigabit */
-+ {"NAND 256MiB 1,8V 8-bit", 0xAA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 256MiB 3,3V 8-bit", 0xDA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 256MiB 1,8V 16-bit", 0xBA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+ {"NAND 256MiB 3,3V 16-bit", 0xCA, 0, 256, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+
-+ /* 4 Gigabit */
-+ {"NAND 512MiB 1,8V 8-bit", 0xAC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 512MiB 3,3V 8-bit", 0xDC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 512MiB 1,8V 16-bit", 0xBC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+ {"NAND 512MiB 3,3V 16-bit", 0xCC, 0, 512, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+
-+ /* 8 Gigabit */
-+ {"NAND 1GiB 1,8V 8-bit", 0xA3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 1GiB 3,3V 8-bit", 0xD3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 1GiB 1,8V 16-bit", 0xB3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+ {"NAND 1GiB 3,3V 16-bit", 0xC3, 0, 1024, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+
-+ /* 16 Gigabit */
-+ {"NAND 2GiB 1,8V 8-bit", 0xA5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 2GiB 3,3V 8-bit", 0xD5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_NO_AUTOINCR},
-+ {"NAND 2GiB 1,8V 16-bit", 0xB5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+ {"NAND 2GiB 3,3V 16-bit", 0xC5, 0, 2048, 0, NAND_SAMSUNG_LP_OPTIONS | NAND_BUSWIDTH_16 | NAND_NO_AUTOINCR},
-+
-+ /* Renesas AND 1 Gigabit. Those chips do not support extended id and have a strange page/block layout !
-+ * The chosen minimum erasesize is 4 * 2 * 2048 = 16384 Byte, as those chips have an array of 4 page planes
-+ * 1 block = 2 pages, but due to plane arrangement the blocks 0-3 consists of page 0 + 4,1 + 5, 2 + 6, 3 + 7
-+ * Anyway JFFS2 would increase the eraseblock size so we chose a combined one which can be erased in one go
-+ * There are more speed improvements for reads and writes possible, but not implemented now
-+ */
-+ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, NAND_IS_AND | NAND_NO_AUTOINCR | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH},
-+
-+ {NULL,}
-+};
-+
-+/*
-+* Manufacturer ID list
-+*/
-+struct nand_manufacturers nand_manuf_ids[] = {
-+ {NAND_MFR_TOSHIBA, "Toshiba"},
-+ {NAND_MFR_SAMSUNG, "Samsung"},
-+ {NAND_MFR_FUJITSU, "Fujitsu"},
-+ {NAND_MFR_NATIONAL, "National"},
-+ {NAND_MFR_RENESAS, "Renesas"},
-+ {NAND_MFR_STMICRO, "ST Micro"},
-+ {NAND_MFR_HYNIX, "Hynix"},
-+ {0x0, "Unknown"}
-+};
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/rescue.ld linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/rescue.ld
---- linux-2.6.19.2.old/arch/cris/arch-v32/boot/rescue/rescue.ld 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/boot/rescue/rescue.ld 2006-10-18 10:52:47.000000000 +0200
-@@ -1,20 +1,40 @@
--MEMORY
-+/*#OUTPUT_FORMAT(elf32-us-cris) */
-+OUTPUT_ARCH (crisv32)
-+
-+MEMORY
- {
-- flash : ORIGIN = 0x00000000,
-- LENGTH = 0x00100000
-+ bootblk : ORIGIN = 0x38000000,
-+ LENGTH = 0x00004000
-+ intmem : ORIGIN = 0x38004000,
-+ LENGTH = 0x00005000
- }
-
- SECTIONS
- {
- .text :
- {
-- stext = . ;
-+ _stext = . ;
- *(.text)
-- etext = . ;
-- } > flash
-+ *(.rodata)
-+ *(.rodata.*)
-+ _etext = . ;
-+ } > bootblk
- .data :
- {
- *(.data)
-- edata = . ;
-- } > flash
-+ _edata = . ;
-+ } > bootblk
-+ .bss :
-+ {
-+ _bss = . ;
-+ *(.bss)
-+ _end = ALIGN( 0x10 ) ;
-+ } > intmem
-+
-+ /* Get rid of stuff from EXPORT_SYMBOL(foo). */
-+ /DISCARD/ :
-+ {
-+ *(__ksymtab_strings)
-+ *(__ksymtab)
-+ }
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Kconfig linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Kconfig
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Kconfig 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Kconfig 2007-01-29 16:14:16.000000000 +0100
-@@ -6,14 +6,6 @@
- This option enables the ETRAX FS built-in 10/100Mbit Ethernet
- controller.
-
--config ETRAX_ETHERNET_HW_CSUM
-- bool "Hardware accelerated ethernet checksum and scatter/gather"
-- depends on ETRAX_ETHERNET
-- depends on ETRAX_STREAMCOPROC
-- default y
-- help
-- Hardware acceleration of checksumming and scatter/gather
--
- config ETRAX_ETHERNET_IFACE0
- depends on ETRAX_ETHERNET
- bool "Enable network interface 0"
-@@ -23,6 +15,52 @@
- bool "Enable network interface 1 (uses DMA6 and DMA7)"
-
- choice
-+ prompt "Eth0 led group"
-+ depends on ETRAX_ETHERNET_IFACE0
-+ default ETRAX_ETH0_USE_LEDGRP0
-+
-+config ETRAX_ETH0_USE_LEDGRP0
-+ bool "Use LED grp 0"
-+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 0 for eth0
-+
-+config ETRAX_ETH0_USE_LEDGRP1
-+ bool "Use LED grp 1"
-+ depends on ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 1 for eth0
-+
-+config ETRAX_ETH0_USE_LEDGRPNULL
-+ bool "Use no LEDs for eth0"
-+ help
-+ Use no LEDs for eth0
-+endchoice
-+
-+choice
-+ prompt "Eth1 led group"
-+ depends on ETRAX_ETHERNET_IFACE1
-+ default ETRAX_ETH1_USE_LEDGRP1
-+
-+config ETRAX_ETH1_USE_LEDGRP0
-+ bool "Use LED grp 0"
-+ depends on ETRAX_NBR_LED_GRP_ONE || ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 0 for eth1
-+
-+config ETRAX_ETH1_USE_LEDGRP1
-+ bool "Use LED grp 1"
-+ depends on ETRAX_NBR_LED_GRP_TWO
-+ help
-+ Use LED grp 1 for eth1
-+
-+config ETRAX_ETH1_USE_LEDGRPNULL
-+ bool "Use no LEDs for eth1"
-+ help
-+ Use no LEDs for eth1
-+endchoice
-+
-+choice
- prompt "Network LED behavior"
- depends on ETRAX_ETHERNET
- default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
-@@ -56,10 +94,25 @@
- config ETRAXFS_SERIAL
- bool "Serial-port support"
- depends on ETRAX_ARCH_V32
-+ select SERIAL_CORE
-+ select SERIAL_CORE_CONSOLE
- help
- Enables the ETRAX FS serial driver for ser0 (ttyS0)
- You probably want this enabled.
-
-+config ETRAX_RS485
-+ bool "RS-485 support"
-+ depends on ETRAXFS_SERIAL
-+ help
-+ Enables support for RS-485 serial communication.
-+
-+config ETRAX_RS485_DISABLE_RECEIVER
-+ bool "Disable serial receiver"
-+ depends on ETRAX_RS485
-+ help
-+ It is necessary to disable the serial receiver to avoid serial
-+ loopback. Not all products are able to do this in software only.
-+
- config ETRAX_SERIAL_PORT0
- bool "Serial port 0 enabled"
- depends on ETRAXFS_SERIAL
-@@ -70,6 +123,31 @@
- ser0 can use dma4 or dma6 for output and dma5 or dma7 for input.
-
- choice
-+ prompt "Ser0 default port type "
-+ depends on ETRAX_SERIAL_PORT0
-+ default ETRAX_SERIAL_PORT0_TYPE_232
-+ help
-+ Type of serial port.
-+
-+config ETRAX_SERIAL_PORT0_TYPE_232
-+ bool "Ser0 is a RS-232 port"
-+ help
-+ Configure serial port 0 to be a RS-232 port.
-+
-+config ETRAX_SERIAL_PORT0_TYPE_485HD
-+ bool "Ser0 is a half duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 0 to be a half duplex (two wires) RS-485 port.
-+
-+config ETRAX_SERIAL_PORT0_TYPE_485FD
-+ bool "Ser0 is a full duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 0 to be a full duplex (four wires) RS-485 port.
-+endchoice
-+
-+choice
- prompt "Ser0 DMA in channel "
- depends on ETRAX_SERIAL_PORT0
- default ETRAX_SERIAL_PORT0_NO_DMA_IN
-@@ -139,6 +217,31 @@
- Enables the ETRAX FS serial driver for ser1 (ttyS1).
-
- choice
-+ prompt "Ser1 default port type"
-+ depends on ETRAX_SERIAL_PORT1
-+ default ETRAX_SERIAL_PORT1_TYPE_232
-+ help
-+ Type of serial port.
-+
-+config ETRAX_SERIAL_PORT1_TYPE_232
-+ bool "Ser1 is a RS-232 port"
-+ help
-+ Configure serial port 1 to be a RS-232 port.
-+
-+config ETRAX_SERIAL_PORT1_TYPE_485HD
-+ bool "Ser1 is a half duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 1 to be a half duplex (two wires) RS-485 port.
-+
-+config ETRAX_SERIAL_PORT1_TYPE_485FD
-+ bool "Ser1 is a full duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 1 to be a full duplex (four wires) RS-485 port.
-+endchoice
-+
-+choice
- prompt "Ser1 DMA in channel "
- depends on ETRAX_SERIAL_PORT1
- default ETRAX_SERIAL_PORT1_NO_DMA_IN
-@@ -210,6 +313,31 @@
- Enables the ETRAX FS serial driver for ser2 (ttyS2).
-
- choice
-+ prompt "Ser2 default port type"
-+ depends on ETRAX_SERIAL_PORT2
-+ default ETRAX_SERIAL_PORT2_TYPE_232
-+ help
-+ What DMA channel to use for ser2
-+
-+config ETRAX_SERIAL_PORT2_TYPE_232
-+ bool "Ser2 is a RS-232 port"
-+ help
-+ Configure serial port 2 to be a RS-232 port.
-+
-+config ETRAX_SERIAL_PORT2_TYPE_485HD
-+ bool "Ser2 is a half duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 2 to be a half duplex (two wires) RS-485 port.
-+
-+config ETRAX_SERIAL_PORT2_TYPE_485FD
-+ bool "Ser2 is a full duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 2 to be a full duplex (four wires) RS-485 port.
-+endchoice
-+
-+choice
- prompt "Ser2 DMA in channel "
- depends on ETRAX_SERIAL_PORT2
- default ETRAX_SERIAL_PORT2_NO_DMA_IN
-@@ -279,6 +407,31 @@
- Enables the ETRAX FS serial driver for ser3 (ttyS3).
-
- choice
-+ prompt "Ser3 default port type"
-+ depends on ETRAX_SERIAL_PORT3
-+ default ETRAX_SERIAL_PORT3_TYPE_232
-+ help
-+ What DMA channel to use for ser3.
-+
-+config ETRAX_SERIAL_PORT3_TYPE_232
-+ bool "Ser3 is a RS-232 port"
-+ help
-+ Configure serial port 3 to be a RS-232 port.
-+
-+config ETRAX_SERIAL_PORT3_TYPE_485HD
-+ bool "Ser3 is a half duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 3 to be a half duplex (two wires) RS-485 port.
-+
-+config ETRAX_SERIAL_PORT3_TYPE_485FD
-+ bool "Ser3 is a full duplex RS-485 port"
-+ depends on ETRAX_RS485
-+ help
-+ Configure serial port 3 to be a full duplex (four wires) RS-485 port.
-+endchoice
-+
-+choice
- prompt "Ser3 DMA in channel "
- depends on ETRAX_SERIAL_PORT3
- default ETRAX_SERIAL_PORT3_NO_DMA_IN
-@@ -341,38 +494,6 @@
- string "Ser 3 CD bit (empty = not used)"
- depends on ETRAX_SERIAL_PORT3
-
--config ETRAX_RS485
-- bool "RS-485 support"
-- depends on ETRAX_SERIAL
-- help
-- Enables support for RS-485 serial communication. For a primer on
-- RS-485, see <http://www.hw.cz/english/docs/rs485/rs485.html>.
--
--config ETRAX_RS485_DISABLE_RECEIVER
-- bool "Disable serial receiver"
-- depends on ETRAX_RS485
-- help
-- It is necessary to disable the serial receiver to avoid serial
-- loopback. Not all products are able to do this in software only.
-- Axis 2400/2401 must disable receiver.
--
--config ETRAX_AXISFLASHMAP
-- bool "Axis flash-map support"
-- depends on ETRAX_ARCH_V32
-- select MTD
-- select MTD_CFI
-- select MTD_CFI_AMDSTD
-- select MTD_OBSOLETE_CHIPS
-- select MTD_AMDSTD
-- select MTD_CHAR
-- select MTD_BLOCK
-- select MTD_PARTITIONS
-- select MTD_CONCAT
-- select MTD_COMPLEX_MAPPINGS
-- help
-- This option enables MTD mapping of flash devices. Needed to use
-- flash memories. If unsure, say Y.
--
- config ETRAX_SYNCHRONOUS_SERIAL
- bool "Synchronous serial-port support"
- depends on ETRAX_ARCH_V32
-@@ -405,6 +526,31 @@
- A synchronous serial port can run in manual or DMA mode.
- Selecting this option will make it run in DMA mode.
-
-+config ETRAX_AXISFLASHMAP
-+ bool "Axis flash-map support"
-+ depends on ETRAX_ARCH_V32
-+ select MTD
-+ select MTD_CFI
-+ select MTD_CFI_AMDSTD
-+ select MTD_JEDECPROBE
-+ select MTD_CHAR
-+ select MTD_BLOCK
-+ select MTD_PARTITIONS
-+ select MTD_CONCAT
-+ select MTD_COMPLEX_MAPPINGS
-+ help
-+ This option enables MTD mapping of flash devices. Needed to use
-+ flash memories. If unsure, say Y.
-+
-+config ETRAX_AXISFLASHMAP_MTD0WHOLE
-+ bool "MTD0 is whole boot flash device"
-+ depends on ETRAX_AXISFLASHMAP
-+ default N
-+ help
-+ When this option is not set, mtd0 refers to the first partition
-+ on the boot flash device. When set, mtd0 refers to the whole
-+ device, with mtd1 referring to the first partition etc.
-+
- config ETRAX_PTABLE_SECTOR
- int "Byte-offset of partition table sector"
- depends on ETRAX_AXISFLASHMAP
-@@ -425,11 +571,19 @@
- This option enables MTD mapping of NAND flash devices. Needed to use
- NAND flash memories. If unsure, say Y.
-
-+config ETRAX_NANDBOOT
-+ bool "Boot from NAND flash"
-+ depends on ETRAX_NANDFLASH
-+ help
-+ This options enables booting from NAND flash devices.
-+ Say Y if your boot code, kernel and root file system is in
-+ NAND flash. Say N if they are in NOR flash.
-+
- config ETRAX_I2C
- bool "I2C driver"
- depends on ETRAX_ARCH_V32
- help
-- This option enabled the I2C driver used by e.g. the RTC driver.
-+ This option enables the I2C driver used by e.g. the RTC driver.
-
- config ETRAX_I2C_DATA_PORT
- string "I2C data pin"
-@@ -476,18 +630,19 @@
- Remember that you need to setup the port directions appropriately in
- the General configuration.
-
--config ETRAX_PA_BUTTON_BITMASK
-- hex "PA-buttons bitmask"
-+config ETRAX_VIRTUAL_GPIO
-+ bool "Virtual GPIO support"
- depends on ETRAX_GPIO
-- default "0x02"
- help
-- This is a bitmask (8 bits) with information about what bits on PA
-- that are used for buttons.
-- Most products has a so called TEST button on PA1, if that is true
-- use 0x02 here.
-- Use 00 if there are no buttons on PA.
-- If the bitmask is <> 00 a button driver will be included in the gpio
-- driver. ETRAX general I/O support must be enabled.
-+ Enables the virtual Etrax general port device (major 120, minor 6).
-+ It uses an I/O expander for the I2C-bus.
-+
-+config ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN
-+ int "Virtual GPIO interrupt pin on PA pin"
-+ range 0 7
-+ depends on ETRAX_VIRTUAL_GPIO
-+ help
-+ The pin to use on PA for virtual gpio interrupt.
-
- config ETRAX_PA_CHANGEABLE_DIR
- hex "PA user changeable dir mask"
-@@ -584,6 +739,25 @@
- that a user can change the value on using ioctl's.
- Bit set = changeable.
-
-+config ETRAX_PV_CHANGEABLE_DIR
-+ hex "PV user changeable dir mask"
-+ depends on ETRAX_VIRTUAL_GPIO
-+ default "0x0000"
-+ help
-+ This is a bitmask (16 bits) with information of what bits in PV
-+ that a user can change direction on using ioctl's.
-+ Bit set = changeable.
-+ You probably want 0x0000 here, but it depends on your hardware.
-+
-+config ETRAX_PV_CHANGEABLE_BITS
-+ hex "PV user changeable bits mask"
-+ depends on ETRAX_VIRTUAL_GPIO
-+ default "0x0000"
-+ help
-+ This is a bitmask (16 bits) with information of what bits in PV
-+ that a user can change the value on using ioctl's.
-+ Bit set = changeable.
-+
- config ETRAX_IDE
- bool "ATA/IDE support"
- depends on ETRAX_ARCH_V32
-@@ -603,11 +777,11 @@
- select HOTPLUG
- select PCCARD_NONSTATIC
- help
-- Enabled the ETRAX Carbus driver.
-+ Enabled the ETRAX Carbus driver.
-
- config PCI
- bool
-- depends on ETRAX_CARDBUS
-+ depends on ETRAX_CARDBUS
- default y
-
- config ETRAX_IOP_FW_LOAD
-@@ -623,3 +797,175 @@
- help
- This option enables a driver for the stream co-processor
- for cryptographic operations.
-+
-+source drivers/mmc/Kconfig
-+
-+config ETRAX_SPI_MMC
-+# Make this one of several "choices" (possible simultaneously but
-+# suggested uniquely) when an IOP driver emerges for "real" MMC/SD
-+# protocol support.
-+ tristate
-+ depends on MMC
-+ default MMC
-+ select SPI
-+ select MMC_SPI
-+ select ETRAX_SPI_MMC_BOARD
-+
-+# For the parts that can't be a module (due to restrictions in
-+# framework elsewhere).
-+config ETRAX_SPI_MMC_BOARD
-+ boolean
-+ default n
-+
-+# While the board info is MMC_SPI only, the drivers are written to be
-+# independent of MMC_SPI, so we'll keep SPI non-dependent on the
-+# MMC_SPI config choices (well, except for a single depends-on-line
-+# for the board-info file until a separate non-MMC SPI board file
-+# emerges).
-+# FIXME: When that happens, we'll need to be able to ask for and
-+# configure non-MMC SPI ports together with MMC_SPI ports (if multiple
-+# SPI ports are enabled).
-+
-+config ETRAX_SPI_SSER0
-+ tristate "SPI using synchronous serial port 0 (sser0)"
-+ depends on ETRAX_SPI_MMC
-+ default m if MMC_SPI=m
-+ default y if MMC_SPI=y
-+ default y if MMC_SPI=n
-+ select SPI_ETRAX_SSER
-+ help
-+ Say Y for an MMC/SD socket connected to synchronous serial port 0,
-+ or for devices using the SPI protocol on that port. Say m if you
-+ want to build it as a module, which will be named spi_crisv32_sser.
-+ (You need to select MMC separately.)
-+
-+config ETRAX_SPI_SSER0_DMA
-+ bool "DMA for SPI on sser0 enabled"
-+ depends on ETRAX_SPI_SSER0
-+ depends on !ETRAX_SERIAL_PORT1_DMA4_OUT && !ETRAX_SERIAL_PORT1_DMA5_IN
-+ default y
-+ help
-+ Say Y if using DMA (dma4/dma5) for SPI on synchronous serial port 0.
-+
-+config ETRAX_SPI_MMC_CD_SSER0_PIN
-+ string "MMC/SD card detect pin for SPI on sser0"
-+ depends on ETRAX_SPI_SSER0 && MMC_SPI
-+ default "pd11"
-+ help
-+ The pin to use for SD/MMC card detect. This pin should be pulled up
-+ and grounded when a card is present. If defined as " " (space), no
-+ pin is selected. A card must then always be inserted for proper
-+ action.
-+
-+config ETRAX_SPI_MMC_WP_SSER0_PIN
-+ string "MMC/SD card write-protect pin for SPI on sser0"
-+ depends on ETRAX_SPI_SSER0 && MMC_SPI
-+ default "pd10"
-+ help
-+ The pin to use for the SD/MMC write-protect signal for a memory
-+ card. If defined as " " (space), the card is considered writable.
-+
-+config ETRAX_SPI_SSER1
-+ tristate "SPI using synchronous serial port 1 (sser1)"
-+ depends on ETRAX_SPI_MMC
-+ default m if MMC_SPI=m && ETRAX_SPI_SSER0=n
-+ default y if MMC_SPI=y && ETRAX_SPI_SSER0=n
-+ default y if MMC_SPI=n && ETRAX_SPI_SSER0=n
-+ select SPI_ETRAX_SSER
-+ help
-+ Say Y for an MMC/SD socket connected to synchronous serial port 1,
-+ or for devices using the SPI protocol on that port. Say m if you
-+ want to build it as a module, which will be named spi_crisv32_sser.
-+ (You need to select MMC separately.)
-+
-+config ETRAX_SPI_SSER1_DMA
-+ bool "DMA for SPI on sser1 enabled"
-+ depends on ETRAX_SPI_SSER1 && !ETRAX_ETHERNET_IFACE1
-+ depends on !ETRAX_SERIAL_PORT0_DMA6_OUT && !ETRAX_SERIAL_PORT0_DMA7_IN
-+ default y
-+ help
-+ Say Y if using DMA (dma6/dma7) for SPI on synchronous serial port 1.
-+
-+config ETRAX_SPI_MMC_CD_SSER1_PIN
-+ string "MMC/SD card detect pin for SPI on sser1"
-+ depends on ETRAX_SPI_SSER1 && MMC_SPI
-+ default "pd12"
-+ help
-+ The pin to use for SD/MMC card detect. This pin should be pulled up
-+ and grounded when a card is present. If defined as " " (space), no
-+ pin is selected. A card must then always be inserted for proper
-+ action.
-+
-+config ETRAX_SPI_MMC_WP_SSER1_PIN
-+ string "MMC/SD card write-protect pin for SPI on sser1"
-+ depends on ETRAX_SPI_SSER1 && MMC_SPI
-+ default "pd9"
-+ help
-+ The pin to use for the SD/MMC write-protect signal for a memory
-+ card. If defined as " " (space), the card is considered writable.
-+
-+config ETRAX_SPI_GPIO
-+ tristate "Bitbanged SPI using gpio pins"
-+ depends on ETRAX_SPI_MMC
-+ select SPI_ETRAX_GPIO
-+ default m if MMC_SPI=m && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n
-+ default y if MMC_SPI=y && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n
-+ default y if MMC_SPI=n && ETRAX_SPI_SSER0=n && ETRAX_SPI_SSER1=n
-+ help
-+ Say Y for an MMC/SD socket connected to general I/O pins (but not
-+ a complete synchronous serial ports), or for devices using the SPI
-+ protocol on general I/O pins. Slow and slows down the system.
-+ Say m to build it as a module, which will be called spi_crisv32_gpio.
-+ (You need to select MMC separately.)
-+
-+# The default match that of sser0, only because that's how it was tested.
-+config ETRAX_SPI_CS_PIN
-+ string "SPI chip select pin"
-+ depends on ETRAX_SPI_GPIO
-+ default "pc3"
-+ help
-+ The pin to use for SPI chip select.
-+
-+config ETRAX_SPI_CLK_PIN
-+ string "SPI clock pin"
-+ depends on ETRAX_SPI_GPIO
-+ default "pc1"
-+ help
-+ The pin to use for the SPI clock.
-+
-+config ETRAX_SPI_DATAIN_PIN
-+ string "SPI MISO (data in) pin"
-+ depends on ETRAX_SPI_GPIO
-+ default "pc16"
-+ help
-+ The pin to use for SPI data in from the device.
-+
-+config ETRAX_SPI_DATAOUT_PIN
-+ string "SPI MOSI (data out) pin"
-+ depends on ETRAX_SPI_GPIO
-+ default "pc0"
-+ help
-+ The pin to use for SPI data out to the device.
-+
-+config ETRAX_SPI_MMC_CD_GPIO_PIN
-+ string "MMC/SD card detect pin for SPI using gpio (space for none)"
-+ depends on ETRAX_SPI_GPIO && MMC_SPI
-+ default "pd11"
-+ help
-+ The pin to use for SD/MMC card detect. This pin should be pulled up
-+ and grounded when a card is present. If defined as " " (space), no
-+ pin is selected. A card must then always be inserted for proper
-+ action.
-+
-+config ETRAX_SPI_MMC_WP_GPIO_PIN
-+ string "MMC/SD card write-protect pin for SPI using gpio (space for none)"
-+ depends on ETRAX_SPI_GPIO && MMC_SPI
-+ default "pd10"
-+ help
-+ The pin to use for the SD/MMC write-protect signal for a memory
-+ card. If defined as " " (space), the card is considered writable.
-+
-+# Avoid choices causing non-working configs by conditionalizing the inclusion.
-+if ETRAX_SPI_MMC
-+source drivers/spi/Kconfig
-+endif
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/Makefile 2007-01-29 16:14:16.000000000 +0100
-@@ -11,3 +11,4 @@
- obj-$(CONFIG_ETRAX_I2C) += i2c.o
- obj-$(CONFIG_ETRAX_SYNCHRONOUS_SERIAL) += sync_serial.o
- obj-$(CONFIG_PCI) += pci/
-+obj-$(CONFIG_ETRAX_SPI_MMC_BOARD) += board_mmcspi.o
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/axisflashmap.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/axisflashmap.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/axisflashmap.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/axisflashmap.c 2007-02-06 17:37:50.000000000 +0100
-@@ -11,7 +11,7 @@
- * partition split defined below.
- *
- * Copy of os/lx25/arch/cris/arch-v10/drivers/axisflashmap.c 1.5
-- * with minor changes.
-+ * with quite a few changes now.
- *
- */
-
-@@ -27,6 +27,8 @@
- #include <linux/mtd/mtdram.h>
- #include <linux/mtd/partitions.h>
-
-+#include <linux/cramfs_fs.h>
-+
- #include <asm/arch/hwregs/config_defs.h>
- #include <asm/axisflashmap.h>
- #include <asm/mmu.h>
-@@ -37,16 +39,24 @@
- #define FLASH_UNCACHED_ADDR KSEG_E
- #define FLASH_CACHED_ADDR KSEG_F
-
-+#define PAGESIZE (512)
-+
- #if CONFIG_ETRAX_FLASH_BUSWIDTH==1
- #define flash_data __u8
- #elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
- #define flash_data __u16
- #elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
--#define flash_data __u16
-+#define flash_data __u32
- #endif
-
- /* From head.S */
--extern unsigned long romfs_start, romfs_length, romfs_in_flash;
-+extern unsigned long romfs_in_flash; /* 1 when romfs_start, _length in flash */
-+extern unsigned long romfs_start, romfs_length;
-+extern unsigned long nand_boot; /* 1 when booted from nand flash */
-+
-+struct partition_name {
-+ char name[6];
-+};
-
- /* The master mtd for the entire flash. */
- struct mtd_info* axisflash_mtd = NULL;
-@@ -112,32 +122,20 @@
- .map_priv_1 = FLASH_UNCACHED_ADDR + MEM_CSE0_SIZE
- };
-
--/* If no partition-table was found, we use this default-set. */
--#define MAX_PARTITIONS 7
--#define NUM_DEFAULT_PARTITIONS 3
-+#define MAX_PARTITIONS 7
-+#ifdef CONFIG_ETRAX_NANDBOOT
-+#define NUM_DEFAULT_PARTITIONS 4
-+#define DEFAULT_ROOTFS_PARTITION_NO 2
-+#define DEFAULT_MEDIA_SIZE 0x2000000 /* 32 megs */
-+#else
-+#define NUM_DEFAULT_PARTITIONS 3
-+#define DEFAULT_ROOTFS_PARTITION_NO (-1)
-+#define DEFAULT_MEDIA_SIZE 0x800000 /* 8 megs */
-+#endif
-
--/*
-- * Default flash size is 2MB. CONFIG_ETRAX_PTABLE_SECTOR is most likely the
-- * size of one flash block and "filesystem"-partition needs 5 blocks to be able
-- * to use JFFS.
-- */
--static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
-- {
-- .name = "boot firmware",
-- .size = CONFIG_ETRAX_PTABLE_SECTOR,
-- .offset = 0
-- },
-- {
-- .name = "kernel",
-- .size = 0x200000 - (6 * CONFIG_ETRAX_PTABLE_SECTOR),
-- .offset = CONFIG_ETRAX_PTABLE_SECTOR
-- },
-- {
-- .name = "filesystem",
-- .size = 5 * CONFIG_ETRAX_PTABLE_SECTOR,
-- .offset = 0x200000 - (5 * CONFIG_ETRAX_PTABLE_SECTOR)
-- }
--};
-+#if (MAX_PARTITIONS < NUM_DEFAULT_PARTITIONS)
-+#error MAX_PARTITIONS must be >= than NUM_DEFAULT_PARTITIONS
-+#endif
-
- /* Initialize the ones normally used. */
- static struct mtd_partition axis_partitions[MAX_PARTITIONS] = {
-@@ -178,6 +176,56 @@
- },
- };
-
-+
-+/* If no partition-table was found, we use this default-set.
-+ * Default flash size is 8MB (NOR). CONFIG_ETRAX_PTABLE_SECTOR is most
-+ * likely the size of one flash block and "filesystem"-partition needs
-+ * to be >=5 blocks to be able to use JFFS.
-+ */
-+static struct mtd_partition axis_default_partitions[NUM_DEFAULT_PARTITIONS] = {
-+ {
-+ .name = "boot firmware",
-+ .size = CONFIG_ETRAX_PTABLE_SECTOR,
-+ .offset = 0
-+ },
-+ {
-+ .name = "kernel",
-+ .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR,
-+ .offset = CONFIG_ETRAX_PTABLE_SECTOR
-+ },
-+#define FILESYSTEM_SECTOR (11 * CONFIG_ETRAX_PTABLE_SECTOR)
-+#ifdef CONFIG_ETRAX_NANDBOOT
-+ {
-+ .name = "rootfs",
-+ .size = 10 * CONFIG_ETRAX_PTABLE_SECTOR,
-+ .offset = FILESYSTEM_SECTOR
-+ },
-+#undef FILESYSTEM_SECTOR
-+#define FILESYSTEM_SECTOR (21 * CONFIG_ETRAX_PTABLE_SECTOR)
-+#endif
-+ {
-+ .name = "rwfs",
-+ .size = DEFAULT_MEDIA_SIZE - FILESYSTEM_SECTOR,
-+ .offset = FILESYSTEM_SECTOR
-+ }
-+};
-+
-+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-+/* Main flash device */
-+static struct mtd_partition main_partition = {
-+ .name = "main",
-+ .size = 0,
-+ .offset = 0
-+};
-+#endif
-+
-+/* Auxilliary partition if we find another flash */
-+static struct mtd_partition aux_partition = {
-+ .name = "aux",
-+ .size = 0,
-+ .offset = 0
-+};
-+
- /*
- * Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
- * chips in that order (because the amd_flash-driver is faster).
-@@ -186,23 +234,23 @@
- {
- struct mtd_info *mtd_cs = NULL;
-
-- printk(KERN_INFO
-+ printk(KERN_INFO
- "%s: Probing a 0x%08lx bytes large window at 0x%08lx.\n",
- map_cs->name, map_cs->size, map_cs->map_priv_1);
-
--#ifdef CONFIG_MTD_AMDSTD
-- mtd_cs = do_map_probe("amd_flash", map_cs);
--#endif
- #ifdef CONFIG_MTD_CFI
-+ mtd_cs = do_map_probe("cfi_probe", map_cs);
-+#endif
-+#ifdef CONFIG_MTD_JEDECPROBE
- if (!mtd_cs) {
-- mtd_cs = do_map_probe("cfi_probe", map_cs);
-+ mtd_cs = do_map_probe("jedec_probe", map_cs);
- }
- #endif
-
- return mtd_cs;
- }
-
--/*
-+/*
- * Probe each chip select individually for flash chips. If there are chips on
- * both cse0 and cse1, the mtd_info structs will be concatenated to one struct
- * so that MTD partitions can cross chip boundries.
-@@ -217,22 +265,17 @@
- {
- struct mtd_info *mtd_cse0;
- struct mtd_info *mtd_cse1;
-- struct mtd_info *mtd_nand = NULL;
- struct mtd_info *mtd_total;
-- struct mtd_info *mtds[3];
-+ struct mtd_info *mtds[2];
- int count = 0;
-
- if ((mtd_cse0 = probe_cs(&map_cse0)) != NULL)
- mtds[count++] = mtd_cse0;
- if ((mtd_cse1 = probe_cs(&map_cse1)) != NULL)
- mtds[count++] = mtd_cse1;
-+
-
--#ifdef CONFIG_ETRAX_NANDFLASH
-- if ((mtd_nand = crisv32_nand_flash_probe()) != NULL)
-- mtds[count++] = mtd_nand;
--#endif
--
-- if (!mtd_cse0 && !mtd_cse1 && !mtd_nand) {
-+ if (!mtd_cse0 && !mtd_cse1) {
- /* No chip found. */
- return NULL;
- }
-@@ -248,7 +291,7 @@
- */
- mtd_total = mtd_concat_create(mtds,
- count,
-- "cse0+cse1+nand");
-+ "cse0+cse1");
- #else
- printk(KERN_ERR "%s and %s: Cannot concatenate due to kernel "
- "(mis)configuration!\n", map_cse0.name, map_cse1.name);
-@@ -260,57 +303,155 @@
-
- /* The best we can do now is to only use what we found
- * at cse0.
-- */
-+ */
- mtd_total = mtd_cse0;
- map_destroy(mtd_cse1);
- }
- } else {
-- mtd_total = mtd_cse0? mtd_cse0 : mtd_cse1 ? mtd_cse1 : mtd_nand;
--
-+ mtd_total = mtd_cse0 ? mtd_cse0 : mtd_cse1;
-+
- }
-
- return mtd_total;
- }
-
--extern unsigned long crisv32_nand_boot;
--extern unsigned long crisv32_nand_cramfs_offset;
--
- /*
- * Probe the flash chip(s) and, if it succeeds, read the partition-table
- * and register the partitions with MTD.
- */
- static int __init init_axis_flash(void)
- {
-- struct mtd_info *mymtd;
-+ struct mtd_info *main_mtd;
-+ struct mtd_info *aux_mtd = NULL;
- int err = 0;
- int pidx = 0;
- struct partitiontable_head *ptable_head = NULL;
- struct partitiontable_entry *ptable;
-- int use_default_ptable = 1; /* Until proven otherwise. */
-- const char *pmsg = KERN_INFO " /dev/flash%d at 0x%08x, size 0x%08x\n";
-- static char page[512];
-+ int ptable_ok = 0;
-+ static char page[PAGESIZE];
- size_t len;
-+ int ram_rootfs_partition = -1; /* -1 => no RAM rootfs partition */
-+ int part;
-+
-+ /* We need a root fs. If it resides in RAM, we need to use an
-+ * MTDRAM device, so it must be enabled in the kernel config,
-+ * but its size must be configured as 0 so as not to conflict
-+ * with our usage.
-+ */
-+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
-+ if (!romfs_in_flash && !nand_boot) {
-+ printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
-+ "device; configure CONFIG_MTD_MTDRAM with size = 0!\n");
-+ panic("This kernel cannot boot from RAM!\n");
-+ }
-+#endif
-
- #ifndef CONFIG_ETRAXFS_SIM
-- mymtd = flash_probe();
-- mymtd->read(mymtd, CONFIG_ETRAX_PTABLE_SECTOR, 512, &len, page);
-- ptable_head = (struct partitiontable_head *)(page + PARTITION_TABLE_OFFSET);
-+ main_mtd = flash_probe();
-+ if (main_mtd)
-+ printk(KERN_INFO "%s: 0x%08x bytes of NOR flash memory.\n",
-+ main_mtd->name, main_mtd->size);
-+
-+#ifdef CONFIG_ETRAX_NANDFLASH
-+ aux_mtd = crisv32_nand_flash_probe();
-+ if (aux_mtd)
-+ printk(KERN_INFO "%s: 0x%08x bytes of NAND flash memory.\n",
-+ aux_mtd->name, aux_mtd->size);
-
-- if (!mymtd) {
-+#ifdef CONFIG_ETRAX_NANDBOOT
-+ {
-+ struct mtd_info *tmp_mtd;
-+
-+ printk(KERN_INFO "axisflashmap: Set to boot from NAND flash, "
-+ "making NAND flash primary device.\n");
-+ tmp_mtd = main_mtd;
-+ main_mtd = aux_mtd;
-+ aux_mtd = tmp_mtd;
-+ }
-+#endif /* CONFIG_ETRAX_NANDBOOT */
-+#endif /* CONFIG_ETRAX_NANDFLASH */
-+
-+ if (!main_mtd && !aux_mtd) {
- /* There's no reason to use this module if no flash chip can
- * be identified. Make sure that's understood.
- */
- printk(KERN_INFO "axisflashmap: Found no flash chip.\n");
-- } else {
-- printk(KERN_INFO "%s: 0x%08x bytes of flash memory.\n",
-- mymtd->name, mymtd->size);
-- axisflash_mtd = mymtd;
- }
-
-- if (mymtd) {
-- mymtd->owner = THIS_MODULE;
-+#if 0 /* Dump flash memory so we can see what is going on */
-+ if (main_mtd) {
-+ int sectoraddr, i;
-+ for (sectoraddr = 0; sectoraddr < 2*65536+4096; sectoraddr += PAGESIZE) {
-+ main_mtd->read(main_mtd, sectoraddr, PAGESIZE, &len, page);
-+ printk(KERN_INFO
-+ "Sector at %d (length %d):\n",
-+ sectoraddr, len);
-+ for (i = 0; i < PAGESIZE; i += 16) {
-+ printk(KERN_INFO
-+ "%02x %02x %02x %02x %02x %02x %02x %02x "
-+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
-+ page[i] & 255, page[i+1] & 255,
-+ page[i+2] & 255, page[i+3] & 255,
-+ page[i+4] & 255, page[i+5] & 255,
-+ page[i+6] & 255, page[i+7] & 255,
-+ page[i+8] & 255, page[i+9] & 255,
-+ page[i+10] & 255, page[i+11] & 255,
-+ page[i+12] & 255, page[i+13] & 255,
-+ page[i+14] & 255, page[i+15] & 255);
-+ }
-+
-+ }
-+ }
-+#endif
-+
-+ if (main_mtd) {
-+ main_mtd->owner = THIS_MODULE;
-+ axisflash_mtd = main_mtd;
-+
-+ loff_t ptable_sector = CONFIG_ETRAX_PTABLE_SECTOR;
-+
-+ pidx++; /* First partition (rescue) is always set to the default. */
-+#ifdef CONFIG_ETRAX_NANDBOOT
-+ /* We know where the partition table should be located,
-+ * it will be in first good block after that.
-+ */
-+ int blockstat;
-+ do {
-+ blockstat = main_mtd->block_isbad(main_mtd, ptable_sector);
-+ if (blockstat < 0)
-+ ptable_sector = 0; /* read error */
-+ else if (blockstat)
-+ ptable_sector += main_mtd->erasesize;
-+ } while (blockstat && ptable_sector);
-+#endif
-+ if (ptable_sector) {
-+ main_mtd->read(main_mtd, ptable_sector, PAGESIZE, &len, page);
-+ ptable_head = &((struct partitiontable *) page)->head;
-+ }
-+
-+#if 0 /* Dump partition table so we can see what is going on */
-+ printk(KERN_INFO
-+ "axisflashmap: flash read %d bytes at 0x%08x, data: "
-+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
-+ len, CONFIG_ETRAX_PTABLE_SECTOR,
-+ page[0] & 255, page[1] & 255,
-+ page[2] & 255, page[3] & 255,
-+ page[4] & 255, page[5] & 255,
-+ page[6] & 255, page[7] & 255);
-+ printk(KERN_INFO
-+ "axisflashmap: partition table offset %d, data: "
-+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
-+ PARTITION_TABLE_OFFSET,
-+ page[PARTITION_TABLE_OFFSET+0] & 255,
-+ page[PARTITION_TABLE_OFFSET+1] & 255,
-+ page[PARTITION_TABLE_OFFSET+2] & 255,
-+ page[PARTITION_TABLE_OFFSET+3] & 255,
-+ page[PARTITION_TABLE_OFFSET+4] & 255,
-+ page[PARTITION_TABLE_OFFSET+5] & 255,
-+ page[PARTITION_TABLE_OFFSET+6] & 255,
-+ page[PARTITION_TABLE_OFFSET+7] & 255);
-+#endif
- }
-- pidx++; /* First partition is always set to the default. */
-
- if (ptable_head && (ptable_head->magic == PARTITION_TABLE_MAGIC)
- && (ptable_head->size <
-@@ -323,7 +464,6 @@
- /* Looks like a start, sane length and end of a
- * partition table, lets check csum etc.
- */
-- int ptable_ok = 0;
- struct partitiontable_entry *max_addr =
- (struct partitiontable_entry *)
- ((unsigned long)ptable_head + sizeof(*ptable_head) +
-@@ -331,7 +471,7 @@
- unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
- unsigned char *p;
- unsigned long csum = 0;
--
-+
- ptable = (struct partitiontable_entry *)
- ((unsigned long)ptable_head + sizeof(*ptable_head));
-
-@@ -343,108 +483,177 @@
- csum += *p++;
- csum += *p++;
- csum += *p++;
-- }
-+ }
- ptable_ok = (csum == ptable_head->checksum);
-
- /* Read the entries and use/show the info. */
-- printk(KERN_INFO " Found a%s partition table at 0x%p-0x%p.\n",
-+ printk(KERN_INFO "axisflashmap: "
-+ "Found a%s partition table at 0x%p-0x%p.\n",
- (ptable_ok ? " valid" : "n invalid"), ptable_head,
- max_addr);
-
- /* We have found a working bootblock. Now read the
-- * partition table. Scan the table. It ends when
-- * there is 0xffffffff, that is, empty flash.
-+ * partition table. Scan the table. It ends with 0xffffffff.
- */
- while (ptable_ok
-- && ptable->offset != 0xffffffff
-+ && ptable->offset != PARTITIONTABLE_END_MARKER
- && ptable < max_addr
-- && pidx < MAX_PARTITIONS) {
-+ && pidx < MAX_PARTITIONS - 1) {
-
-- axis_partitions[pidx].offset = offset + ptable->offset + (crisv32_nand_boot ? 16384 : 0);
-- axis_partitions[pidx].size = ptable->size;
--
-- printk(pmsg, pidx, axis_partitions[pidx].offset,
-- axis_partitions[pidx].size);
-+ axis_partitions[pidx].offset = offset + ptable->offset;
-+#ifdef CONFIG_ETRAX_NANDFLASH
-+ if (main_mtd->type == MTD_NANDFLASH) {
-+ axis_partitions[pidx].size =
-+ (((ptable+1)->offset ==
-+ PARTITIONTABLE_END_MARKER) ?
-+ main_mtd->size :
-+ ((ptable+1)->offset + offset)) -
-+ (ptable->offset + offset);
-+
-+ } else
-+#endif /* CONFIG_ETRAX_NANDFLASH */
-+ axis_partitions[pidx].size = ptable->size;
-+#ifdef CONFIG_ETRAX_NANDBOOT
-+ /* Save partition number of jffs2 ro partition.
-+ * Needed if RAM booting or root file system in RAM.
-+ */
-+ if (!nand_boot &&
-+ ram_rootfs_partition < 0 && /* not already set */
-+ ptable->type == PARTITION_TYPE_JFFS2 &&
-+ (ptable->flags & PARTITION_FLAGS_READONLY_MASK) ==
-+ PARTITION_FLAGS_READONLY)
-+ ram_rootfs_partition = pidx;
-+#endif /* CONFIG_ETRAX_NANDBOOT */
- pidx++;
- ptable++;
- }
-- use_default_ptable = !ptable_ok;
- }
-
-- if (romfs_in_flash) {
-- /* Add an overlapping device for the root partition (romfs). */
-+ /* Decide whether to use default partition table. */
-+ /* Only use default table if we actually have a device (main_mtd) */
-
-- axis_partitions[pidx].name = "romfs";
-- if (crisv32_nand_boot) {
-- char* data = kmalloc(1024, GFP_KERNEL);
-- int len;
-- int offset = crisv32_nand_cramfs_offset & ~(1024-1);
-- char* tmp;
--
-- mymtd->read(mymtd, offset, 1024, &len, data);
-- tmp = &data[crisv32_nand_cramfs_offset % 512];
-- axis_partitions[pidx].size = *(unsigned*)(tmp + 4);
-- axis_partitions[pidx].offset = crisv32_nand_cramfs_offset;
-- kfree(data);
-- } else {
-- axis_partitions[pidx].size = romfs_length;
-- axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
-- }
-+ struct mtd_partition *partition = &axis_partitions[0];
-+ if (main_mtd && !ptable_ok) {
-+ memcpy(axis_partitions, axis_default_partitions,
-+ sizeof(axis_default_partitions));
-+ pidx = NUM_DEFAULT_PARTITIONS;
-+ ram_rootfs_partition = DEFAULT_ROOTFS_PARTITION_NO;
-+ }
-
-+ /* Add artificial partitions for rootfs if necessary */
-+ if (romfs_in_flash) {
-+ /* rootfs is in directly accessible flash memory = NOR flash.
-+ Add an overlapping device for the rootfs partition. */
-+ printk(KERN_INFO "axisflashmap: Adding partition for "
-+ "overlapping root file system image\n");
-+ axis_partitions[pidx].size = romfs_length;
-+ axis_partitions[pidx].offset = romfs_start - FLASH_CACHED_ADDR;
-+ axis_partitions[pidx].name = "romfs";
- axis_partitions[pidx].mask_flags |= MTD_WRITEABLE;
--
-- printk(KERN_INFO
-- " Adding readonly flash partition for romfs image:\n");
-- printk(pmsg, pidx, axis_partitions[pidx].offset,
-- axis_partitions[pidx].size);
-+ ram_rootfs_partition = -1;
- pidx++;
- }
--
-- if (mymtd) {
-- if (use_default_ptable) {
-- printk(KERN_INFO " Using default partition table.\n");
-- err = add_mtd_partitions(mymtd, axis_default_partitions,
-- NUM_DEFAULT_PARTITIONS);
-- } else {
-- err = add_mtd_partitions(mymtd, axis_partitions, pidx);
-+ else if (romfs_length && !nand_boot) {
-+ /* romfs exists in memory, but not in flash, so must be in RAM.
-+ * Configure an MTDRAM partition. */
-+ if (ram_rootfs_partition < 0) { /* none set yet */
-+ ram_rootfs_partition = pidx; /* put it at the end */
-+ pidx++;
- }
-+ printk(KERN_INFO "axisflashmap: Adding partition for "
-+ "root file system image in RAM\n");
-+ axis_partitions[ram_rootfs_partition].size = romfs_length;
-+ axis_partitions[ram_rootfs_partition].offset = romfs_start;
-+ axis_partitions[ram_rootfs_partition].name = "romfs";
-+ axis_partitions[ram_rootfs_partition].mask_flags |=
-+ MTD_WRITEABLE;
-+ }
-
-- if (err) {
-- panic("axisflashmap could not add MTD partitions!\n");
-- }
-+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
-+ if (main_mtd) {
-+ main_partition.size = main_mtd->size;
-+ err = add_mtd_partitions(main_mtd, &main_partition, 1);
-+ if (err)
-+ panic("axisflashmap: Could not initialize "
-+ "partition for whole main mtd device!\n");
- }
--/* CONFIG_EXTRAXFS_SIM */
- #endif
-
-- if (!romfs_in_flash) {
-- /* Create an RAM device for the root partition (romfs). */
-+ /* Now, register all partitions with mtd.
-+ * We do this one at a time so we can slip in an MTDRAM device
-+ * in the proper place if required. */
-+
-+ for (part = 0; part < pidx; part++) {
-+ if (part == ram_rootfs_partition) {
-+ /* add MTDRAM partition here */
-+ struct mtd_info *mtd_ram;
-+
-+ mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
-+ if (!mtd_ram)
-+ panic("axisflashmap: Couldn't allocate memory "
-+ "for mtd_info!\n");
-+ printk(KERN_INFO "axisflashmap: Adding RAM partition "
-+ "for rootfs image.\n");
-+ err = mtdram_init_device(mtd_ram,
-+ (void *)partition[part].offset,
-+ partition[part].size,
-+ partition[part].name);
-+ if (err)
-+ panic("axisflashmap: Could not initialize "
-+ "MTD RAM device!\n");
-+ /* JFFS2 likes to have an erasesize. Keep potential
-+ * JFFS2 rootfs happy by providing one. Since image
-+ * was most likely created for main mtd, use that
-+ * erasesize, if available. Otherwise, make a guess. */
-+ mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize :
-+ CONFIG_ETRAX_PTABLE_SECTOR);
-+ } else {
-+ err = add_mtd_partitions(main_mtd,
-+ &partition[part], 1);
-+ if (err)
-+ panic("axisflashmap: Could not add mtd "
-+ "partition %d\n", part);
-+ }
-+ }
-
--#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
-- /* No use trying to boot this kernel from RAM. Panic! */
-- printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
-- "device due to kernel (mis)configuration!\n");
-- panic("This kernel cannot boot from RAM!\n");
--#else
-- struct mtd_info *mtd_ram;
-+#endif /* CONFIG_EXTRAXFS_SIM */
-
-- mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
-- GFP_KERNEL);
-- if (!mtd_ram) {
-- panic("axisflashmap couldn't allocate memory for "
-- "mtd_info!\n");
-- }
-+#ifdef CONFIG_ETRAXFS_SIM
-+ /* For simulator, always use a RAM partition.
-+ * The rootfs will be found after the kernel in RAM,
-+ * with romfs_start and romfs_end indicating location and size.
-+ */
-+ struct mtd_info *mtd_ram;
-+
-+ mtd_ram = (struct mtd_info *)kmalloc(sizeof(struct mtd_info),
-+ GFP_KERNEL);
-+ if (!mtd_ram) {
-+ panic("axisflashmap: Couldn't allocate memory for "
-+ "mtd_info!\n");
-+ }
-
-- printk(KERN_INFO " Adding RAM partition for romfs image:\n");
-- printk(pmsg, pidx, romfs_start, romfs_length);
-+ printk(KERN_INFO "axisflashmap: Adding RAM partition for romfs, "
-+ "at %u, size %u\n",
-+ (unsigned) romfs_start, (unsigned) romfs_length);
-+
-+ err = mtdram_init_device(mtd_ram, (void*)romfs_start,
-+ romfs_length, "romfs");
-+ if (err) {
-+ panic("axisflashmap: Could not initialize MTD RAM "
-+ "device!\n");
-+ }
-+#endif /* CONFIG_EXTRAXFS_SIM */
-+
-+#ifndef CONFIG_ETRAXFS_SIM
-+ if (aux_mtd) {
-+ aux_partition.size = aux_mtd->size;
-+ err = add_mtd_partitions(aux_mtd, &aux_partition, 1);
-+ if (err)
-+ panic("axisflashmap: Could not initialize "
-+ "aux mtd device!\n");
-
-- err = mtdram_init_device(mtd_ram, (void*)romfs_start,
-- romfs_length, "romfs");
-- if (err) {
-- panic("axisflashmap could not initialize MTD RAM "
-- "device!\n");
-- }
--#endif
- }
-+#endif /* CONFIG_EXTRAXFS_SIM */
-
- return err;
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/board_mmcspi.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/board_mmcspi.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/board_mmcspi.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/board_mmcspi.c 2007-01-29 15:51:19.000000000 +0100
-@@ -0,0 +1,686 @@
-+/*
-+ * Somewhat generic "board-side" code to support SPI drivers for chips
-+ * with a CRIS v32 and later. Not really board-specific, and only for
-+ * registration of SPI devices for MMC, hence the "mmcspi" part of the
-+ * name instead of a proper board name.
-+ *
-+ * Copyright (c) 2007 Axis Communications AB
-+ *
-+ * TODO: SDIO interrupt-pin support (though can't be done until
-+ * there's support added in both the mmc_spi and the mmc frameworks).
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/mmc_spi.h>
-+#include <linux/mmc/host.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/pinmux.h>
-+#include <asm/arch/dma.h>
-+#include <linux/err.h>
-+
-+#include <asm/io.h>
-+
-+/* We need some housekeeping. */
-+#define CONCAT_(a, b) a ## b
-+#define CONCAT(a, b) CONCAT_(a, b)
-+#define CONCAT3(a, b, c) CONCAT(CONCAT(a, b), c)
-+
-+/* Grr. Why not define them as usual in autoconf, #ifdef REVEAL_MODULES? */
-+#if !defined(CONFIG_SPI_ETRAX_SSER) && defined(CONFIG_SPI_ETRAX_SSER_MODULE)
-+#define CONFIG_SPI_ETRAX_SSER
-+#endif
-+
-+#if !defined(CONFIG_ETRAX_SPI_SSER0) && defined(CONFIG_ETRAX_SPI_SSER0_MODULE)
-+#define CONFIG_ETRAX_SPI_SSER0
-+#endif
-+
-+#if !defined(CONFIG_ETRAX_SPI_SSER1) && defined(CONFIG_ETRAX_SPI_SSER1_MODULE)
-+#define CONFIG_ETRAX_SPI_SSER1
-+#endif
-+
-+#if !defined(CONFIG_SPI_ETRAX_GPIO) && defined(CONFIG_SPI_ETRAX_GPIO_MODULE)
-+#define CONFIG_SPI_ETRAX_GPIO
-+#endif
-+
-+#define CONFIGURED_PIN(x) ((x) != NULL && *(x) != 0 && *(x) != ' ')
-+
-+/* Helper function to configure an iopin for input. */
-+
-+static int crisv32_config_pin_in(struct crisv32_iopin *pin, const char *name)
-+{
-+ int ret = crisv32_io_get_name(pin, name);
-+ if (ret)
-+ return ret;
-+
-+ crisv32_io_set_dir(pin, crisv32_io_dir_in);
-+ return 0;
-+}
-+
-+/*
-+ * Writable data pointed to by the constant parts of each MMC_SPI bus
-+ * interface. Should only hold MMC-specific state (for the
-+ * MMC-specific pins), nothing SPI-generic.
-+ */
-+
-+struct crisv32_mmc_spi_pinstate {
-+ struct crisv32_iopin write_protect_pin;
-+ struct crisv32_iopin card_detect_pin;
-+
-+ /* We must poll for card-detect, which we do each: */
-+#define CARD_DETECT_CHECK_INTERVAL (2*HZ)
-+ /* We poll using a self-arming workqueue function. */
-+ struct work_struct cd_work;
-+
-+ /* When we detect a change in card presence, we call this
-+ * function, supplied by the mmc_spi framework: */
-+ irqreturn_t (*detectfunc)(int, void *);
-+
-+ /*
-+ * We call that function with this parameter as the second
-+ * one. We must assume the other parameters are unused, as we
-+ * don't have an interrupt context.
-+ */
-+ void *detectfunc_param2;
-+
-+ /* State for the card-detect worker. */
-+ int card_present;
-+};
-+
-+/* Rearming "work" function for card-detect polling. */
-+
-+static void crisv32_cd_worker(void *x)
-+{
-+ struct crisv32_mmc_spi_pinstate *state = x;
-+
-+ /* It's a pull-up, so a card is present when 0. */
-+ int card_present = crisv32_io_rd(&state->card_detect_pin) == 0;
-+
-+ if (card_present != state->card_present) {
-+ state->card_present = card_present;
-+ state->detectfunc(0, state->detectfunc_param2);
-+ }
-+ schedule_delayed_work(&state->cd_work, CARD_DETECT_CHECK_INTERVAL);
-+}
-+
-+/* The parts of MMC-specific configuration common to GPIO and SSER. */
-+
-+static int crisv32_mmcspi_config_common(struct spi_device *spidev,
-+ irqreturn_t (*intfunc)(int, void *),
-+ struct mmc_host *mmc_host,
-+ const struct crisv32_mmc_spi_pindata *pd)
-+{
-+ int ret = 0;
-+ struct crisv32_mmc_spi_pinstate *ps = pd->pinstate;
-+
-+ /*
-+ * If we don't have a card-detect pin, the card must be
-+ * present at startup (including insmod/modprobe). No
-+ * re-scans are done if no card is present at that time.
-+ */
-+ if (CONFIGURED_PIN(pd->card_detect)) {
-+ ret = crisv32_config_pin_in(&ps->card_detect_pin,
-+ pd->card_detect);
-+
-+ if (ret != 0)
-+ goto bad_card_detect;
-+
-+ /* Need to cast away const from pd, unfortunately. */
-+ INIT_WORK(&ps->cd_work, crisv32_cd_worker, (void *) ps);
-+ ps->card_present = 1;
-+ ps->detectfunc = intfunc;
-+ ps->detectfunc_param2 = mmc_host;
-+ crisv32_cd_worker(ps);
-+ } else
-+ ps->detectfunc = NULL;
-+
-+ /*
-+ * We set up for checking for presence of a write-protect pin
-+ * as pin.port being non-NULL.
-+ */
-+ memset(&ps->write_protect_pin, 0, sizeof ps->write_protect_pin);
-+ if (CONFIGURED_PIN(pd->write_protect)) {
-+ ret = crisv32_config_pin_in(&ps->write_protect_pin,
-+ pd->write_protect);
-+
-+ if (ret != 0)
-+ goto bad_write_protect;
-+ }
-+
-+ return 0;
-+
-+ bad_write_protect:
-+ if (ps->detectfunc) {
-+ cancel_rearming_delayed_work(&ps->cd_work);
-+ ps->detectfunc = NULL;
-+ }
-+
-+ bad_card_detect:
-+ return ret;
-+}
-+
-+/* A function to undo crisv32_mmcspi_config_common. */
-+
-+static void crisv32_mmcspi_deconfig_common(const struct
-+ crisv32_mmc_spi_pindata *pd)
-+{
-+ if (pd->pinstate->detectfunc) {
-+ cancel_rearming_delayed_work(&pd->pinstate->cd_work);
-+ pd->pinstate->detectfunc = NULL;
-+ }
-+
-+ /* We don't have to undo the pin allocations, being GPIO. */
-+}
-+
-+/* Helper function for write-protect sense. */
-+
-+static int crisv32_mmcspi_get_ro_helper(struct crisv32_mmc_spi_pinstate *ps)
-+{
-+ return ps->write_protect_pin.port != NULL
-+ && crisv32_io_rd(&ps->write_protect_pin) != 0;
-+}
-+
-+/* The hardware-interface-specific SPI+MMC parts. */
-+
-+#ifdef CONFIG_SPI_ETRAX_SSER
-+static const char crisv32_matching_spi_sser_driver_name[] __init_or_module
-+ = "spi_crisv32_sser";
-+
-+/*
-+ * Make up something we can use in tables and function without
-+ * #ifdef-cluttering.
-+ */
-+#ifdef CONFIG_ETRAX_SPI_SSER0_DMA
-+#define WITH_ETRAX_SPI_SSER0_DMA 1
-+#else
-+#define WITH_ETRAX_SPI_SSER0_DMA 0
-+#endif
-+#ifdef CONFIG_ETRAX_SPI_SSER1_DMA
-+#define WITH_ETRAX_SPI_SSER1_DMA 1
-+#else
-+#define WITH_ETRAX_SPI_SSER1_DMA 0
-+#endif
-+
-+/* Write-protect sense for the SSER interface. */
-+
-+static int crisv32_mmcspi_sser_get_ro(struct device *dev)
-+{
-+ struct spi_device *spidev = to_spi_device(dev);
-+ struct crisv32_mmc_spi_sser_hwdata *sser_defs
-+ = spidev->controller_data;
-+ struct crisv32_mmc_spi_pindata *pd = &sser_defs->mmc;
-+ return crisv32_mmcspi_get_ro_helper(pd->pinstate);
-+}
-+
-+/* Initialize the MMC-specific parts of the MMC+SPI interface, SSER. */
-+
-+static int crisv32_mmcspi_sser_init(struct device *dev,
-+ irqreturn_t (*intfunc)(int, void *),
-+ void *xmmc_host)
-+{
-+ struct mmc_host *mmc_host = xmmc_host;
-+ struct spi_device *spidev = to_spi_device(dev);
-+ struct crisv32_mmc_spi_sser_hwdata *sser_defs
-+ = spidev->controller_data;
-+ int ret = crisv32_mmcspi_config_common(spidev, intfunc, mmc_host,
-+ &sser_defs->mmc);
-+ if (ret != 0)
-+ return ret;
-+
-+ mmc_host->f_max = spidev->max_speed_hz;
-+
-+ /*
-+ * Let's just set this to ceil(100e6/65536). It wouldn't be
-+ * hard to change the base frequency to support down to 450Hz,
-+ * but there's no apparent requirement from known hardware.
-+ * Would also require adjustments to the SPI code, not just
-+ * here.
-+ *
-+ * On second thought, let's not set f_min unconditionally, as
-+ * mmc doesn't treat it as a limit, but as the frequency to
-+ * use at initialization. We stick with what mmc_spi sets, if
-+ * it fits.
-+ */
-+ if (mmc_host->f_min < 1526)
-+ mmc_host->f_min = 1526;
-+
-+ dev_info(dev, "CRIS v32 mmc_spi support hooked to SPI on sser%d"
-+ " (cd: %s, wp: %s)\n",
-+ spidev->master->bus_num,
-+ CONFIGURED_PIN(sser_defs->mmc.card_detect)
-+ ? sser_defs->mmc.card_detect : "(none)",
-+ CONFIGURED_PIN(sser_defs->mmc.write_protect)
-+ ? sser_defs->mmc.write_protect : "(none)");
-+ return 0;
-+}
-+
-+/* Similarly, to undo crisv32_mmcspi_sser_init. */
-+
-+static void crisv32_mmcspi_sser_exit(struct device *dev, void *xmmc_host)
-+{
-+ struct spi_device *spidev = to_spi_device(dev);
-+ struct crisv32_mmc_spi_sser_hwdata *sser_defs
-+ = spidev->controller_data;
-+
-+ crisv32_mmcspi_deconfig_common(&sser_defs->mmc);
-+}
-+
-+/*
-+ * Connect sser and DMA channels and return the proper numbers to use.
-+ *
-+ * This function exists really only to avoid having the following constants
-+ * tabled: regi_sserN, SSERn_INTR_VECT, pinmux_sserN, SYNC_SERn_TX_DMA_NBR,
-+ * SYNC_SERn_RX_DMA_NBR dma_sserN, regi_dmaM, regi_dmaN, DMAm_INTR_VECT,
-+ * DMAn_INTR_VECT. I might have missed some. :-)
-+ */
-+static int crisv32_allocate_sser(struct crisv32_regi_n_int *sserp,
-+ struct crisv32_regi_n_int *dmainp,
-+ struct crisv32_regi_n_int *dmaoutp,
-+ u32 sserno)
-+{
-+ int ret;
-+ u32 regi_sser = sserno == 0 ? regi_sser0 : regi_sser1;
-+ u32 sser_irq = sserno == 0 ? SSER0_INTR_VECT : SSER1_INTR_VECT;
-+ BUG_ON(sserno > 1 || sserp == NULL);
-+
-+ ret = crisv32_pinmux_alloc_fixed(sserno == 0
-+ ? pinmux_sser0 : pinmux_sser1);
-+ if (ret != 0)
-+ return ret;
-+
-+ sserp->regi = regi_sser;
-+ sserp->irq = sser_irq;
-+
-+ if (dmaoutp) {
-+ crisv32_request_dma(sserno == 0
-+ ? SYNC_SER0_TX_DMA_NBR
-+ : SYNC_SER1_TX_DMA_NBR,
-+ "SD/MMC SPI dma tr",
-+ DMA_VERBOSE_ON_ERROR | DMA_PANIC_ON_ERROR,
-+ /* Let's be brave and ask for the
-+ max. Except it's simplex, so
-+ let's request half the max
-+ speed in either direction. */
-+ 50 * 1000 * 1000 / 8 / 2,
-+ sserno == 0 ? dma_sser0 : dma_sser1);
-+ dmaoutp->regi = sserno == 0
-+ ? CONCAT(regi_dma, SYNC_SER0_TX_DMA_NBR)
-+ : CONCAT(regi_dma, SYNC_SER1_TX_DMA_NBR);
-+ dmaoutp->irq = sserno == 0
-+ ? CONCAT3(DMA, SYNC_SER0_TX_DMA_NBR, _INTR_VECT)
-+ : CONCAT3(DMA, SYNC_SER1_TX_DMA_NBR, _INTR_VECT);
-+ }
-+
-+ if (dmainp) {
-+ crisv32_request_dma(sserno == 0
-+ ? SYNC_SER0_RX_DMA_NBR
-+ : SYNC_SER1_RX_DMA_NBR,
-+ "SD/MMC SPI dma rec",
-+ DMA_VERBOSE_ON_ERROR | DMA_PANIC_ON_ERROR,
-+ 50 * 1000 * 1000 / 8 / 2,
-+ sserno == 0 ? dma_sser0 : dma_sser1);
-+ dmainp->regi = sserno == 0
-+ ? CONCAT(regi_dma, SYNC_SER0_RX_DMA_NBR)
-+ : CONCAT(regi_dma, SYNC_SER1_RX_DMA_NBR);
-+ dmainp->irq = sserno == 0
-+ ? CONCAT3(DMA, SYNC_SER0_RX_DMA_NBR, _INTR_VECT)
-+ : CONCAT3(DMA, SYNC_SER1_RX_DMA_NBR, _INTR_VECT);
-+ }
-+
-+ return 0;
-+}
-+
-+/* Undo whatever allocations et. al. that crisv32_allocate_sser did. */
-+
-+static void crisv32_free_sser(u32 sserno, int with_dma)
-+{
-+ int ret;
-+
-+ if (with_dma) {
-+ crisv32_free_dma(sserno == 0
-+ ? SYNC_SER0_RX_DMA_NBR
-+ : SYNC_SER1_RX_DMA_NBR);
-+ crisv32_free_dma(sserno == 0
-+ ? SYNC_SER0_TX_DMA_NBR
-+ : SYNC_SER1_TX_DMA_NBR);
-+ }
-+
-+ ret = crisv32_pinmux_dealloc_fixed(sserno == 0
-+ ? pinmux_sser0 : pinmux_sser1);
-+
-+ if (ret != 0)
-+ panic("%s: crisv32_pinmux_dealloc_fixed returned %d\n",
-+ __FUNCTION__, ret);
-+}
-+
-+/* Convenience-macro to avoid typos causing diffs between sser ports. */
-+
-+#define SSER_CDATA(n) \
-+ { \
-+ { \
-+ .using_dma = WITH_ETRAX_SPI_SSER##n##_DMA, \
-+ .iface_allocate = crisv32_allocate_sser##n, \
-+ .iface_free = crisv32_free_sser##n \
-+ }, \
-+ { \
-+ .card_detect \
-+ = CONFIG_ETRAX_SPI_MMC_CD_SSER##n##_PIN,\
-+ .write_protect \
-+ = CONFIG_ETRAX_SPI_MMC_WP_SSER##n##_PIN,\
-+ .pinstate \
-+ = &crisv32_mmcspi_sser##n##_pinstate \
-+ } \
-+ }
-+
-+#ifdef CONFIG_ETRAX_SPI_SSER0
-+
-+/* Allocate hardware to go with sser0 and fill in the right numbers. */
-+
-+static int crisv32_allocate_sser0(struct crisv32_regi_n_int *sserp,
-+ struct crisv32_regi_n_int *dmainp,
-+ struct crisv32_regi_n_int *dmaoutp)
-+{
-+ return crisv32_allocate_sser(sserp, dmainp, dmaoutp, 0);
-+}
-+
-+/* Undo those allocations. */
-+
-+static void crisv32_free_sser0(void)
-+{
-+ crisv32_free_sser(0, WITH_ETRAX_SPI_SSER0_DMA);
-+}
-+
-+static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_sser0_pinstate;
-+static const struct crisv32_mmc_spi_sser_hwdata crisv32_mmcspi_sser0_cdata
-+ = SSER_CDATA(0);
-+#endif /* CONFIG_ETRAX_SPI_SSER0 */
-+
-+#ifdef CONFIG_ETRAX_SPI_SSER1
-+
-+/* Allocate hardware to go with sser0 and fill in the right numbers. */
-+
-+static int crisv32_allocate_sser1(struct crisv32_regi_n_int *sserp,
-+ struct crisv32_regi_n_int *dmainp,
-+ struct crisv32_regi_n_int *dmaoutp)
-+{
-+ return crisv32_allocate_sser(sserp, dmainp, dmaoutp, 1);
-+}
-+
-+/* Undo those allocations. */
-+
-+static void crisv32_free_sser1(void)
-+{
-+ crisv32_free_sser(1, WITH_ETRAX_SPI_SSER1_DMA);
-+}
-+
-+static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_sser1_pinstate;
-+static const struct crisv32_mmc_spi_sser_hwdata crisv32_mmcspi_sser1_cdata
-+ = SSER_CDATA(1);
-+
-+#endif /* CONFIG_ETRAX_SPI_SSER1 */
-+
-+static struct mmc_spi_platform_data crisv32_mmcspi_sser_pdata = {
-+ .init = crisv32_mmcspi_sser_init,
-+ .exit = __devexit_p(crisv32_mmcspi_sser_exit),
-+ .detect_delay = 0,
-+ .get_ro = crisv32_mmcspi_sser_get_ro,
-+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-+ .setpower = NULL
-+};
-+
-+#endif /* CONFIG_SPI_ETRAX_SSER */
-+
-+#ifdef CONFIG_SPI_ETRAX_GPIO
-+
-+static const char crisv32_matching_spi_gpio_driver_name[] __init_or_module
-+ = "spi_crisv32_gpio";
-+
-+/* Write-protect sense for the GPIO interface. */
-+
-+static int crisv32_mmcspi_gpio_get_ro(struct device *dev)
-+{
-+ struct spi_device *spidev = to_spi_device(dev);
-+ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs
-+ = spidev->controller_data;
-+ struct crisv32_mmc_spi_pindata *pd = &gpio_defs->mmc;
-+
-+ return crisv32_mmcspi_get_ro_helper(pd->pinstate);
-+}
-+
-+/* Initialize the MMC-specific parts of the MMC+SPI interface, GPIO. */
-+
-+static int crisv32_mmcspi_gpio_init(struct device *dev,
-+ irqreturn_t (*intfunc)(int, void *),
-+ void *xmmc_host)
-+{
-+ struct mmc_host *mmc_host = xmmc_host;
-+ struct spi_device *spidev = to_spi_device(dev);
-+ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs
-+ = spidev->controller_data;
-+ int ret = crisv32_mmcspi_config_common(spidev, intfunc, mmc_host,
-+ &gpio_defs->mmc);
-+ if (ret)
-+ return ret;
-+
-+ mmc_host->f_max = spidev->max_speed_hz;
-+
-+ /*
-+ * We don't set f_min, as the mmc code doesn't treat it as a
-+ * limit, but as the frequency to use at initialization. We
-+ * stick with what mmc_spi sets.
-+ */
-+ dev_info(dev, "CRIS v32 mmc_spi support hooked to SPI on GPIO"
-+ " (bus #%d, cd: %s, wp: %s)\n",
-+ spidev->master->bus_num,
-+ CONFIGURED_PIN(gpio_defs->mmc.card_detect)
-+ ? gpio_defs->mmc.card_detect : "(none)",
-+ CONFIGURED_PIN(gpio_defs->mmc.write_protect)
-+ ? gpio_defs->mmc.write_protect : "(none)");
-+ return 0;
-+}
-+
-+/* Similarly, to undo crisv32_mmcspi_gpio_init. */
-+
-+static void crisv32_mmcspi_gpio_exit(struct device *dev, void *xmmc_host)
-+{
-+ struct spi_device *spidev = to_spi_device(dev);
-+ struct crisv32_mmc_spi_gpio_hwdata *gpio_defs
-+ = spidev->controller_data;
-+
-+ crisv32_mmcspi_deconfig_common(&gpio_defs->mmc);
-+}
-+
-+static const struct mmc_spi_platform_data crisv32_mmcspi_gpio_pdata = {
-+ .init = crisv32_mmcspi_gpio_init,
-+ .exit = __devexit_p(crisv32_mmcspi_gpio_exit),
-+ .detect_delay = 0,
-+ .get_ro = crisv32_mmcspi_gpio_get_ro,
-+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-+ .setpower = NULL
-+};
-+
-+static struct crisv32_mmc_spi_pinstate crisv32_mmcspi_gpio_pinstate;
-+static const struct crisv32_mmc_spi_gpio_hwdata crisv32_mmcspi_gpio_cdata = {
-+ {
-+ .cs = CONFIG_ETRAX_SPI_CS_PIN,
-+ .miso = CONFIG_ETRAX_SPI_DATAIN_PIN,
-+ .mosi = CONFIG_ETRAX_SPI_DATAOUT_PIN,
-+ .sclk = CONFIG_ETRAX_SPI_CLK_PIN
-+ },
-+ {
-+ .card_detect = CONFIG_ETRAX_SPI_MMC_CD_GPIO_PIN,
-+ .write_protect = CONFIG_ETRAX_SPI_MMC_WP_GPIO_PIN,
-+ .pinstate = &crisv32_mmcspi_gpio_pinstate
-+ }
-+};
-+#endif /* CONFIG_SPI_ETRAX_GPIO */
-+
-+struct crisv32_s_b_i_and_driver_info {
-+ struct spi_board_info sbi;
-+ const char *driver_name;
-+
-+ /*
-+ * We have to adjust the platform device at time of creation
-+ * below, to allow the Linux DMA framework to handle DMA. In
-+ * the name of simplicity, we state the dma:able property
-+ * twice, a bit redundantly; here and in the controller_data
-+ * structure pointed to by spi_board_info.
-+ */
-+ int dma_able;
-+};
-+
-+/* Convenience-macro to avoid typos causing diffs between sser ports. */
-+
-+#define SSER_CONFIG(n) \
-+ { \
-+ /* \
-+ * No meaningful values for .irq or .chip_select, \
-+ * so we leave them out. \
-+ */ \
-+ { \
-+ .modalias = "mmc_spi", \
-+ .platform_data \
-+ = &crisv32_mmcspi_sser_pdata, \
-+ /* \
-+ * Casting to avoid a compiler const-warning. \
-+ */ \
-+ .controller_data \
-+ = ((void *) \
-+ &crisv32_mmcspi_sser##n##_cdata), \
-+ .max_speed_hz = 50 * 1000 * 1000, \
-+ .bus_num = n, \
-+ /* \
-+ * We only provide one mode, so it must be \
-+ * default. \
-+ */ \
-+ .mode = SPI_MODE_3 \
-+ }, \
-+ crisv32_matching_spi_sser_driver_name, \
-+ WITH_ETRAX_SPI_SSER##n##_DMA \
-+ }
-+
-+static const struct crisv32_s_b_i_and_driver_info
-+crisv32_mmcspi_devices[] __initdata = {
-+#ifdef CONFIG_ETRAX_SPI_SSER0
-+ SSER_CONFIG(0),
-+#endif
-+#ifdef CONFIG_ETRAX_SPI_SSER1
-+ SSER_CONFIG(1),
-+#endif
-+#ifdef CONFIG_SPI_ETRAX_GPIO
-+ {
-+ {
-+ .modalias = "mmc_spi",
-+ .platform_data = &crisv32_mmcspi_gpio_pdata,
-+ /* Casting to avoid a compiler const-warning. */
-+ .controller_data
-+ = (void *) &crisv32_mmcspi_gpio_cdata,
-+
-+ /* No, we can't even reach this number with GPIO. */
-+ .max_speed_hz = 5 * 1000 * 1000,
-+ .bus_num = 2
-+ },
-+ crisv32_matching_spi_gpio_driver_name,
-+ 0
-+ },
-+#endif
-+};
-+
-+/* Must not be __initdata. */
-+static const char controller_data_ptr_name[] = "controller_data_ptr";
-+static u64 allmem_mask = ~(u32) 0;
-+
-+/*
-+ * We have to register the SSER and GPIO "platform_device"s separately
-+ * from the "spi_board_info"s in order to have the drivers separated
-+ * from the hardware instance info.
-+ */
-+
-+static int __init crisv32_register_mmcspi(void)
-+{
-+ int ret;
-+ void *retp;
-+ const struct crisv32_s_b_i_and_driver_info *sbip;
-+
-+ for (sbip = crisv32_mmcspi_devices;
-+ sbip < crisv32_mmcspi_devices
-+ + ARRAY_SIZE(crisv32_mmcspi_devices);
-+ sbip++) {
-+
-+ /*
-+ * We have to pass the controller data as a device
-+ * "resource" (FIXME: too?), so it can be available
-+ * for the setup *before* starting the SPI core -
-+ * which is where .controller_data makes it to the SPI
-+ * structure!
-+ */
-+ struct resource mmcspi_res = {
-+ .start = (resource_size_t) sbip->sbi.controller_data,
-+ .end = (resource_size_t) sbip->sbi.controller_data,
-+ .name = controller_data_ptr_name
-+ };
-+
-+ /*
-+ * Presumably we could pass the irqs and register
-+ * addresses and... as individual resources here
-+ * instead of privately in spi_board_info
-+ * .controller_data, and make that part a bit more
-+ * readable. Maybe not worthwhile.
-+ */
-+ /* Need to cast away const here. FIXME: fix the pdrs API. */
-+ retp = platform_device_alloc(sbip->driver_name,
-+ sbip->sbi.bus_num);
-+ if (IS_ERR_VALUE(PTR_ERR(retp)))
-+ return PTR_ERR(retp);
-+
-+ /*
-+ * We can't use platform_device_register_simple as we
-+ * want to set stuff in the device to mark that we'd
-+ * prefer buffers explicitly passed as DMA-able.
-+ * Disabling/omitting the "if" below, cause testing of
-+ * the non-DMA-mem execution path of a DMA-capable
-+ * driver.
-+ */
-+ if (sbip->dma_able) {
-+ struct platform_device *pdev = retp;
-+
-+ pdev->dev.dma_mask = &allmem_mask;
-+ pdev->dev.coherent_dma_mask = allmem_mask;
-+ }
-+
-+ if ((ret = platform_device_add_resources(retp, &mmcspi_res, 1)) != 0
-+ || (ret = platform_device_add(retp)) != 0) {
-+ platform_device_put(retp);
-+ return ret;
-+ }
-+
-+ /*
-+ * The cost of keeping all info rooted at
-+ * crisv32_mmcspi_devices is the allocation overhead
-+ * for allocating separately each board info (in the
-+ * unlikely event that there's more than one).
-+ */
-+ ret = spi_register_board_info(&sbip->sbi, 1);
-+ if (ret != 0)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+#ifdef MODULE
-+#error "Non-module because spi_register_board_info is one-way; there's no unregister function"
-+#endif
-+
-+/*
-+ * Needs to be called before __initcall/module_init because the SPI
-+ * bus scanning happens when the actual driver registers with the SPI
-+ * machinery (spi_bitbang_start/spi_register_master), not when the
-+ * device registers (spi_register_board_info).
-+ */
-+subsys_initcall(crisv32_register_mmcspi);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/cryptocop.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/cryptocop.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/cryptocop.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/cryptocop.c 2007-01-09 10:29:20.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: cryptocop.c,v 1.13 2005/04/21 17:27:55 henriken Exp $
-+/* $Id: cryptocop.c,v 1.22 2007/01/09 09:29:20 starvik Exp $
- *
- * Stream co-processor driver for the ETRAX FS
- *
-@@ -1718,7 +1718,7 @@
- * i = i + 1
- * }
- * i = Nk
-- *
-+ *
- * while (i < (Nb * (Nr + 1))) {
- * temp = w[i - 1]
- * if ((i mod Nk) == 0) {
-@@ -1886,7 +1886,7 @@
- }
-
- static irqreturn_t
--dma_done_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+dma_done_interrupt(int irq, void *dev_id)
- {
- struct cryptocop_prio_job *done_job;
- reg_dma_rw_ack_intr ack_intr = {
-@@ -2226,6 +2226,7 @@
- &pj->iop->ctx_out, (char*)virt_to_phys(&pj->iop->ctx_out)));
-
- /* Start input DMA. */
-+ flush_dma_context(&pj->iop->ctx_in);
- DMA_START_CONTEXT(regi_dma9, virt_to_phys(&pj->iop->ctx_in));
-
- /* Start output DMA. */
-@@ -3459,7 +3460,7 @@
- int err;
- int i;
- static int initialized = 0;
--
-+
- if (initialized)
- return 0;
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/gpio.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/gpio.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/gpio.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/gpio.c 2007-01-09 10:29:20.000000000 +0100
-@@ -1,68 +1,15 @@
--/* $Id: gpio.c,v 1.16 2005/06/19 17:06:49 starvik Exp $
-- *
-+/*
- * ETRAX CRISv32 general port I/O device
- *
-- * Copyright (c) 1999, 2000, 2001, 2002, 2003 Axis Communications AB
-+ * Copyright (c) 1999-2006 Axis Communications AB
- *
- * Authors: Bjorn Wesen (initial version)
- * Ola Knutsson (LED handling)
- * Johan Adolfsson (read/set directions, write, port G,
- * port to ETRAX FS.
- *
-- * $Log: gpio.c,v $
-- * Revision 1.16 2005/06/19 17:06:49 starvik
-- * Merge of Linux 2.6.12.
-- *
-- * Revision 1.15 2005/05/25 08:22:20 starvik
-- * Changed GPIO port order to fit packages/devices/axis-2.4.
-- *
-- * Revision 1.14 2005/04/24 18:35:08 starvik
-- * Updated with final register headers.
-- *
-- * Revision 1.13 2005/03/15 15:43:00 starvik
-- * dev_id needs to be supplied for shared IRQs.
-- *
-- * Revision 1.12 2005/03/10 17:12:00 starvik
-- * Protect alarm list with spinlock.
-- *
-- * Revision 1.11 2005/01/05 06:08:59 starvik
-- * No need to do local_irq_disable after local_irq_save.
-- *
-- * Revision 1.10 2004/11/19 08:38:31 starvik
-- * Removed old crap.
-- *
-- * Revision 1.9 2004/05/14 07:58:02 starvik
-- * Merge of changes from 2.4
-- *
-- * Revision 1.8 2003/09/11 07:29:50 starvik
-- * Merge of Linux 2.6.0-test5
-- *
-- * Revision 1.7 2003/07/10 13:25:46 starvik
-- * Compiles for 2.5.74
-- * Lindented ethernet.c
-- *
-- * Revision 1.6 2003/07/04 08:27:46 starvik
-- * Merge of Linux 2.5.74
-- *
-- * Revision 1.5 2003/06/10 08:26:37 johana
-- * Etrax -> ETRAX CRISv32
-- *
-- * Revision 1.4 2003/06/05 14:22:48 johana
-- * Initialise some_alarms.
-- *
-- * Revision 1.3 2003/06/05 10:15:46 johana
-- * New INTR_VECT macros.
-- * Enable interrupts in global config.
-- *
-- * Revision 1.2 2003/06/03 15:52:50 johana
-- * Initial CRIS v32 version.
-- *
-- * Revision 1.1 2003/06/03 08:53:15 johana
-- * Copy of os/lx25/arch/cris/arch-v10/drivers/gpio.c version 1.7.
-- *
- */
-
--
- #include <linux/module.h>
- #include <linux/sched.h>
- #include <linux/slab.h>
-@@ -85,6 +32,13 @@
- #include <asm/system.h>
- #include <asm/irq.h>
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+#include "i2c.h"
-+
-+#define VIRT_I2C_ADDR 0x40
-+#endif
-+
-+
- /* The following gio ports on ETRAX FS is available:
- * pa 8 bits, supports interrupts off, hi, low, set, posedge, negedge anyedge
- * pb 18 bits
-@@ -111,6 +65,10 @@
- static wait_queue_head_t *gpio_wq;
- #endif
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg);
-+#endif
- static int gpio_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg);
- static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
-@@ -148,55 +106,75 @@
- #define GIO_REG_RD_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
- #define GIO_REG_WR_ADDR(reg) (volatile unsigned long*) (regi_gio + REG_RD_ADDR_gio_##reg )
- unsigned long led_dummy;
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+static unsigned long virtual_dummy;
-+static unsigned long virtual_rw_pv_oe = CONFIG_ETRAX_DEF_GIO_PV_OE;
-+static unsigned short cached_virtual_gpio_read = 0;
-+#endif
-
--static volatile unsigned long *data_out[NUM_PORTS] = {
-- GIO_REG_WR_ADDR(rw_pa_dout),
-- GIO_REG_WR_ADDR(rw_pb_dout),
-+static volatile unsigned long *data_out[NUM_PORTS] = {
-+ GIO_REG_WR_ADDR(rw_pa_dout),
-+ GIO_REG_WR_ADDR(rw_pb_dout),
- &led_dummy,
-- GIO_REG_WR_ADDR(rw_pc_dout),
-- GIO_REG_WR_ADDR(rw_pd_dout),
-+ GIO_REG_WR_ADDR(rw_pc_dout),
-+ GIO_REG_WR_ADDR(rw_pd_dout),
- GIO_REG_WR_ADDR(rw_pe_dout),
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ &virtual_dummy,
-+#endif
- };
-
--static volatile unsigned long *data_in[NUM_PORTS] = {
-- GIO_REG_RD_ADDR(r_pa_din),
-- GIO_REG_RD_ADDR(r_pb_din),
-+static volatile unsigned long *data_in[NUM_PORTS] = {
-+ GIO_REG_RD_ADDR(r_pa_din),
-+ GIO_REG_RD_ADDR(r_pb_din),
- &led_dummy,
-- GIO_REG_RD_ADDR(r_pc_din),
-- GIO_REG_RD_ADDR(r_pd_din),
-+ GIO_REG_RD_ADDR(r_pc_din),
-+ GIO_REG_RD_ADDR(r_pd_din),
- GIO_REG_RD_ADDR(r_pe_din),
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ &virtual_dummy,
-+#endif
- };
-
--static unsigned long changeable_dir[NUM_PORTS] = {
-+static unsigned long changeable_dir[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_DIR,
- CONFIG_ETRAX_PB_CHANGEABLE_DIR,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_DIR,
-- CONFIG_ETRAX_PD_CHANGEABLE_DIR,
-+ CONFIG_ETRAX_PD_CHANGEABLE_DIR,
- CONFIG_ETRAX_PE_CHANGEABLE_DIR,
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ CONFIG_ETRAX_PV_CHANGEABLE_DIR,
-+#endif
- };
-
--static unsigned long changeable_bits[NUM_PORTS] = {
-+static unsigned long changeable_bits[NUM_PORTS] = {
- CONFIG_ETRAX_PA_CHANGEABLE_BITS,
- CONFIG_ETRAX_PB_CHANGEABLE_BITS,
- 0,
- CONFIG_ETRAX_PC_CHANGEABLE_BITS,
- CONFIG_ETRAX_PD_CHANGEABLE_BITS,
- CONFIG_ETRAX_PE_CHANGEABLE_BITS,
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ CONFIG_ETRAX_PV_CHANGEABLE_BITS,
-+#endif
- };
-
--static volatile unsigned long *dir_oe[NUM_PORTS] = {
-- GIO_REG_WR_ADDR(rw_pa_oe),
-- GIO_REG_WR_ADDR(rw_pb_oe),
-+static volatile unsigned long *dir_oe[NUM_PORTS] = {
-+ GIO_REG_WR_ADDR(rw_pa_oe),
-+ GIO_REG_WR_ADDR(rw_pb_oe),
- &led_dummy,
-- GIO_REG_WR_ADDR(rw_pc_oe),
-- GIO_REG_WR_ADDR(rw_pd_oe),
-+ GIO_REG_WR_ADDR(rw_pc_oe),
-+ GIO_REG_WR_ADDR(rw_pd_oe),
- GIO_REG_WR_ADDR(rw_pe_oe),
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ &virtual_rw_pv_oe,
-+#endif
- };
-
-
-
--static unsigned int
-+static unsigned int
- gpio_poll(struct file *file,
- poll_table *wait)
- {
-@@ -278,7 +256,7 @@
- return 0;
-
- if ((data & priv->highalarm) ||
-- (~data & priv->lowalarm)) {
-+ (~data & priv->lowalarm)) {
- mask = POLLIN|POLLRDNORM;
- }
-
-@@ -288,11 +266,26 @@
-
- int etrax_gpio_wake_up_check(void)
- {
-- struct gpio_private *priv = alarmlist;
-+ struct gpio_private *priv;
- unsigned long data = 0;
-+ unsigned long flags;
- int ret = 0;
-+ spin_lock_irqsave(&alarm_lock, flags);
-+ priv = alarmlist;
- while (priv) {
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ if (priv->minor == GPIO_MINOR_V) {
-+ data = (unsigned long)cached_virtual_gpio_read;
-+ }
-+ else {
-+ data = *data_in[priv->minor];
-+ if (priv->minor == GPIO_MINOR_A) {
-+ priv->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-+ }
-+ }
-+#else
- data = *data_in[priv->minor];
-+#endif
- if ((data & priv->highalarm) ||
- (~data & priv->lowalarm)) {
- DP(printk("etrax_gpio_wake_up_check %i\n",priv->minor));
-@@ -301,11 +294,12 @@
- }
- priv = priv->next;
- }
-+ spin_unlock_irqrestore(&alarm_lock, flags);
- return ret;
- }
-
--static irqreturn_t
--gpio_poll_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+static irqreturn_t
-+gpio_poll_timer_interrupt(int irq, void *dev_id)
- {
- if (gpio_some_alarms) {
- return IRQ_RETVAL(etrax_gpio_wake_up_check());
-@@ -314,14 +308,17 @@
- }
-
- static irqreturn_t
--gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+gpio_pa_interrupt(int irq, void *dev_id)
- {
- reg_gio_rw_intr_mask intr_mask;
- reg_gio_r_masked_intr masked_intr;
- reg_gio_rw_ack_intr ack_intr;
- unsigned long tmp;
- unsigned long tmp2;
--
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ unsigned char enable_gpiov_ack = 0;
-+#endif
-+
- /* Find what PA interrupts are active */
- masked_intr = REG_RD(gio, regi_gio, r_masked_intr);
- tmp = REG_TYPE_CONV(unsigned long, reg_gio_r_masked_intr, masked_intr);
-@@ -331,6 +328,17 @@
- tmp &= (gpio_pa_high_alarms | gpio_pa_low_alarms);
- spin_unlock(&alarm_lock);
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ /* Something changed on virtual GPIO. Interrupt is acked by
-+ * reading the device.
-+ */
-+ if (tmp & (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN)) {
-+ i2c_read(VIRT_I2C_ADDR, (void *)&cached_virtual_gpio_read,
-+ sizeof(cached_virtual_gpio_read));
-+ enable_gpiov_ack = 1;
-+ }
-+#endif
-+
- /* Ack them */
- ack_intr = REG_TYPE_CONV(reg_gio_rw_ack_intr, unsigned long, tmp);
- REG_WR(gio, regi_gio, rw_ack_intr, ack_intr);
-@@ -339,13 +347,21 @@
- intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
- tmp2 = REG_TYPE_CONV(unsigned long, reg_gio_rw_intr_mask, intr_mask);
- tmp2 &= ~tmp;
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ /* Do not disable interrupt on virtual GPIO. Changes on virtual
-+ * pins are only noticed by an interrupt.
-+ */
-+ if (enable_gpiov_ack) {
-+ tmp2 |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-+ }
-+#endif
- intr_mask = REG_TYPE_CONV(reg_gio_rw_intr_mask, unsigned long, tmp2);
- REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-
- if (gpio_some_alarms) {
- return IRQ_RETVAL(etrax_gpio_wake_up_check());
- }
-- return IRQ_NONE;
-+ return IRQ_NONE;
- }
-
-
-@@ -358,8 +374,13 @@
- unsigned long shadow;
- volatile unsigned long *port;
- ssize_t retval = count;
-- /* Only bits 0-7 may be used for write operations but allow all
-+ /* Only bits 0-7 may be used for write operations but allow all
- devices except leds... */
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ if (priv->minor == GPIO_MINOR_V) {
-+ return -EFAULT;
-+ }
-+#endif
- if (priv->minor == GPIO_MINOR_LEDS) {
- return -EFAULT;
- }
-@@ -416,25 +437,24 @@
-
- static int
- gpio_open(struct inode *inode, struct file *filp)
--{
-+{
- struct gpio_private *priv;
- int p = iminor(inode);
-
- if (p > GPIO_MINOR_LAST)
- return -EINVAL;
-
-- priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
-+ priv = (struct gpio_private *)kmalloc(sizeof(struct gpio_private),
- GFP_KERNEL);
-
- if (!priv)
- return -ENOMEM;
-+ memset(priv, 0, sizeof(*priv));
-
- priv->minor = p;
-
-- /* initialize the io/alarm struct and link it into our alarmlist */
-+ /* initialize the io/alarm struct */
-
-- priv->next = alarmlist;
-- alarmlist = priv;
- priv->clk_mask = 0;
- priv->data_mask = 0;
- priv->highalarm = 0;
-@@ -443,20 +463,30 @@
-
- filp->private_data = (void *)priv;
-
-+ /* link it into our alarmlist */
-+ spin_lock_irq(&alarm_lock);
-+ priv->next = alarmlist;
-+ alarmlist = priv;
-+ spin_unlock_irq(&alarm_lock);
-+
- return 0;
- }
-
- static int
- gpio_release(struct inode *inode, struct file *filp)
- {
-- struct gpio_private *p = alarmlist;
-- struct gpio_private *todel = (struct gpio_private *)filp->private_data;
-+ struct gpio_private *p;
-+ struct gpio_private *todel;
- /* local copies while updating them: */
- unsigned long a_high, a_low;
- unsigned long some_alarms;
-
- /* unlink from alarmlist and free the private structure */
-
-+ spin_lock_irq(&alarm_lock);
-+ p = alarmlist;
-+ todel = (struct gpio_private *)filp->private_data;
-+
- if (p == todel) {
- alarmlist = todel->next;
- } else {
-@@ -473,6 +503,9 @@
- a_low = 0;
- while (p) {
- if (p->minor == GPIO_MINOR_A) {
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ p->lowalarm |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-+#endif
- a_high |= p->highalarm;
- a_low |= p->lowalarm;
- }
-@@ -483,23 +516,30 @@
- p = p->next;
- }
-
-- spin_lock(&alarm_lock);
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ /* Variables 'some_alarms' and 'a_low' needs to be set here again
-+ * to ensure that interrupt for virtual GPIO is handled.
-+ */
-+ some_alarms = 1;
-+ a_low |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-+#endif
-+
- gpio_some_alarms = some_alarms;
- gpio_pa_high_alarms = a_high;
- gpio_pa_low_alarms = a_low;
-- spin_unlock(&alarm_lock);
-+ spin_unlock_irq(&alarm_lock);
-
- return 0;
- }
-
--/* Main device API. ioctl's to read/set/clear bits, as well as to
-+/* Main device API. ioctl's to read/set/clear bits, as well as to
- * set alarms to wait for using a subsequent select().
- */
-
- unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
- {
-- /* Set direction 0=unchanged 1=input,
-- * return mask with 1=input
-+ /* Set direction 0=unchanged 1=input,
-+ * return mask with 1=input
- */
- unsigned long flags;
- unsigned long dir_shadow;
-@@ -512,6 +552,10 @@
-
- if (priv->minor == GPIO_MINOR_A)
- dir_shadow ^= 0xFF; /* Only 8 bits */
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ else if (priv->minor == GPIO_MINOR_V)
-+ dir_shadow ^= 0xFFFF; /* Only 16 bits */
-+#endif
- else
- dir_shadow ^= 0x3FFFF; /* Only 18 bits */
- return dir_shadow;
-@@ -546,6 +590,11 @@
- return -EINVAL;
- }
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ if (priv->minor == GPIO_MINOR_V)
-+ return virtual_gpio_ioctl(file, cmd, arg);
-+#endif
-+
- switch (_IOC_NR(cmd)) {
- case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
- // read the port
-@@ -553,8 +602,6 @@
- break;
- case IO_SETBITS:
- local_irq_save(flags);
-- if (arg & 0x04)
-- printk("GPIO SET 2\n");
- // set changeable bits with a 1 in arg
- shadow = *data_out[priv->minor];
- shadow |= (arg & changeable_bits[priv->minor]);
-@@ -563,8 +610,6 @@
- break;
- case IO_CLRBITS:
- local_irq_save(flags);
-- if (arg & 0x04)
-- printk("GPIO CLR 2\n");
- // clear changeable bits with a 1 in arg
- shadow = *data_out[priv->minor];
- shadow &= ~(arg & changeable_bits[priv->minor]);
-@@ -574,52 +619,52 @@
- case IO_HIGHALARM:
- // set alarm when bits with 1 in arg go high
- priv->highalarm |= arg;
-- spin_lock(&alarm_lock);
-+ spin_lock_irqsave(&alarm_lock, flags);
- gpio_some_alarms = 1;
- if (priv->minor == GPIO_MINOR_A) {
- gpio_pa_high_alarms |= arg;
- }
-- spin_unlock(&alarm_lock);
-+ spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_LOWALARM:
- // set alarm when bits with 1 in arg go low
- priv->lowalarm |= arg;
-- spin_lock(&alarm_lock);
-+ spin_lock_irqsave(&alarm_lock, flags);
- gpio_some_alarms = 1;
- if (priv->minor == GPIO_MINOR_A) {
- gpio_pa_low_alarms |= arg;
- }
-- spin_unlock(&alarm_lock);
-+ spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_CLRALARM:
- // clear alarm for bits with 1 in arg
- priv->highalarm &= ~arg;
- priv->lowalarm &= ~arg;
-- spin_lock(&alarm_lock);
-+ spin_lock_irqsave(&alarm_lock, flags);
- if (priv->minor == GPIO_MINOR_A) {
-- if (gpio_pa_high_alarms & arg ||
-+ if (gpio_pa_high_alarms & arg ||
- gpio_pa_low_alarms & arg) {
- /* Must update the gpio_pa_*alarms masks */
- }
- }
-- spin_unlock(&alarm_lock);
-+ spin_unlock_irqrestore(&alarm_lock, flags);
- break;
- case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
- /* Read direction 0=input 1=output */
- return *dir_oe[priv->minor];
- case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
-- /* Set direction 0=unchanged 1=input,
-- * return mask with 1=input
-+ /* Set direction 0=unchanged 1=input,
-+ * return mask with 1=input
- */
- return setget_input(priv, arg);
- break;
- case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
-- /* Set direction 0=unchanged 1=output,
-- * return mask with 1=output
-+ /* Set direction 0=unchanged 1=output,
-+ * return mask with 1=output
- */
- return setget_output(priv, arg);
-
-- case IO_CFG_WRITE_MODE:
-+ case IO_CFG_WRITE_MODE:
- {
- unsigned long dir_shadow;
- dir_shadow = *dir_oe[priv->minor];
-@@ -641,7 +686,7 @@
- }
- break;
- }
-- case IO_READ_INBITS:
-+ case IO_READ_INBITS:
- /* *arg is result of reading the input pins */
- val = *data_in[priv->minor];
- if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-@@ -654,7 +699,7 @@
- if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
- return -EFAULT;
- break;
-- case IO_SETGET_INPUT:
-+ case IO_SETGET_INPUT:
- /* bits set in *arg is set to input,
- * *arg updated with current input pins.
- */
-@@ -684,6 +729,132 @@
- return 0;
- }
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+static int
-+virtual_gpio_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-+{
-+ unsigned long flags;
-+ unsigned short val;
-+ unsigned short shadow;
-+ struct gpio_private *priv = (struct gpio_private *)file->private_data;
-+
-+ switch (_IOC_NR(cmd)) {
-+ case IO_SETBITS:
-+ local_irq_save(flags);
-+ // set changeable bits with a 1 in arg
-+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+ shadow |= ~*dir_oe[priv->minor];
-+ shadow |= (arg & changeable_bits[priv->minor]);
-+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+ local_irq_restore(flags);
-+ break;
-+ case IO_CLRBITS:
-+ local_irq_save(flags);
-+ // clear changeable bits with a 1 in arg
-+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+ shadow |= ~*dir_oe[priv->minor];
-+ shadow &= ~(arg & changeable_bits[priv->minor]);
-+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+ local_irq_restore(flags);
-+ break;
-+ case IO_HIGHALARM:
-+ // set alarm when bits with 1 in arg go high
-+ priv->highalarm |= arg;
-+ spin_lock(&alarm_lock);
-+ gpio_some_alarms = 1;
-+ spin_unlock(&alarm_lock);
-+ break;
-+ case IO_LOWALARM:
-+ // set alarm when bits with 1 in arg go low
-+ priv->lowalarm |= arg;
-+ spin_lock(&alarm_lock);
-+ gpio_some_alarms = 1;
-+ spin_unlock(&alarm_lock);
-+ break;
-+ case IO_CLRALARM:
-+ // clear alarm for bits with 1 in arg
-+ priv->highalarm &= ~arg;
-+ priv->lowalarm &= ~arg;
-+ spin_lock(&alarm_lock);
-+ spin_unlock(&alarm_lock);
-+ break;
-+ case IO_CFG_WRITE_MODE:
-+ {
-+ unsigned long dir_shadow;
-+ dir_shadow = *dir_oe[priv->minor];
-+
-+ priv->clk_mask = arg & 0xFF;
-+ priv->data_mask = (arg >> 8) & 0xFF;
-+ priv->write_msb = (arg >> 16) & 0x01;
-+ /* Check if we're allowed to change the bits and
-+ * the direction is correct
-+ */
-+ if (!((priv->clk_mask & changeable_bits[priv->minor]) &&
-+ (priv->data_mask & changeable_bits[priv->minor]) &&
-+ (priv->clk_mask & dir_shadow) &&
-+ (priv->data_mask & dir_shadow)))
-+ {
-+ priv->clk_mask = 0;
-+ priv->data_mask = 0;
-+ return -EPERM;
-+ }
-+ break;
-+ }
-+ case IO_READ_INBITS:
-+ /* *arg is result of reading the input pins */
-+ val = cached_virtual_gpio_read;
-+ val &= ~*dir_oe[priv->minor];
-+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-+ return -EFAULT;
-+ return 0;
-+ break;
-+ case IO_READ_OUTBITS:
-+ /* *arg is result of reading the output shadow */
-+ i2c_read(VIRT_I2C_ADDR, (void *)&val, sizeof(val));
-+ val &= *dir_oe[priv->minor];
-+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-+ return -EFAULT;
-+ break;
-+ case IO_SETGET_INPUT:
-+ {
-+ /* bits set in *arg is set to input,
-+ * *arg updated with current input pins.
-+ */
-+ unsigned short input_mask = ~*dir_oe[priv->minor];
-+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
-+ return -EFAULT;
-+ val = setget_input(priv, val);
-+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-+ return -EFAULT;
-+ if ((input_mask & val) != input_mask) {
-+ /* Input pins changed. All ports desired as input
-+ * should be set to logic 1.
-+ */
-+ unsigned short change = input_mask ^ val;
-+ i2c_read(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+ shadow &= ~change;
-+ shadow |= val;
-+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+ }
-+ break;
-+ }
-+ case IO_SETGET_OUTPUT:
-+ /* bits set in *arg is set to output,
-+ * *arg updated with current output pins.
-+ */
-+ if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
-+ return -EFAULT;
-+ val = setget_output(priv, val);
-+ if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
-+ return -EFAULT;
-+ break;
-+ default:
-+ return -EINVAL;
-+ } /* switch */
-+ return 0;
-+}
-+#endif /* CONFIG_ETRAX_VIRTUAL_GPIO */
-+
- static int
- gpio_leds_ioctl(unsigned int cmd, unsigned long arg)
- {
-@@ -714,6 +885,66 @@
- .release = gpio_release,
- };
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+static void
-+virtual_gpio_init(void)
-+{
-+ reg_gio_rw_intr_cfg intr_cfg;
-+ reg_gio_rw_intr_mask intr_mask;
-+ unsigned short shadow;
-+
-+ shadow = ~virtual_rw_pv_oe; /* Input ports should be set to logic 1 */
-+ shadow |= CONFIG_ETRAX_DEF_GIO_PV_OUT;
-+ i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
-+
-+ /* Set interrupt mask and on what state the interrupt shall trigger.
-+ * For virtual gpio the interrupt shall trigger on logic '0'.
-+ */
-+ intr_cfg = REG_RD(gio, regi_gio, rw_intr_cfg);
-+ intr_mask = REG_RD(gio, regi_gio, rw_intr_mask);
-+
-+ switch (CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN) {
-+ case 0:
-+ intr_cfg.pa0 = regk_gio_lo;
-+ intr_mask.pa0 = regk_gio_yes;
-+ break;
-+ case 1:
-+ intr_cfg.pa1 = regk_gio_lo;
-+ intr_mask.pa1 = regk_gio_yes;
-+ break;
-+ case 2:
-+ intr_cfg.pa2 = regk_gio_lo;
-+ intr_mask.pa2 = regk_gio_yes;
-+ break;
-+ case 3:
-+ intr_cfg.pa3 = regk_gio_lo;
-+ intr_mask.pa3 = regk_gio_yes;
-+ break;
-+ case 4:
-+ intr_cfg.pa4 = regk_gio_lo;
-+ intr_mask.pa4 = regk_gio_yes;
-+ break;
-+ case 5:
-+ intr_cfg.pa5 = regk_gio_lo;
-+ intr_mask.pa5 = regk_gio_yes;
-+ break;
-+ case 6:
-+ intr_cfg.pa6 = regk_gio_lo;
-+ intr_mask.pa6 = regk_gio_yes;
-+ break;
-+ case 7:
-+ intr_cfg.pa7 = regk_gio_lo;
-+ intr_mask.pa7 = regk_gio_yes;
-+ break;
-+ }
-+
-+ REG_WR(gio, regi_gio, rw_intr_cfg, intr_cfg);
-+ REG_WR(gio, regi_gio, rw_intr_mask, intr_mask);
-+
-+ gpio_pa_low_alarms |= (1 << CONFIG_ETRAX_VIRTUAL_GPIO_INTERRUPT_PA_PIN);
-+ gpio_some_alarms = 1;
-+}
-+#endif
-
- /* main driver initialization routine, called from mem.c */
-
-@@ -732,17 +963,18 @@
- }
-
- /* Clear all leds */
-- LED_NETWORK_SET(0);
-+ LED_NETWORK_GRP0_SET(0);
-+ LED_NETWORK_GRP1_SET(0);
- LED_ACTIVE_SET(0);
- LED_DISK_READ(0);
- LED_DISK_WRITE(0);
-
-- printk("ETRAX FS GPIO driver v2.5, (c) 2003-2005 Axis Communications AB\n");
-+ printk("ETRAX FS GPIO driver v2.5, (c) 2003-2006 Axis Communications AB\n");
- /* We call etrax_gpio_wake_up_check() from timer interrupt and
- * from cpu_idle() in kernel/process.c
- * The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
- * in some tests.
-- */
-+ */
- if (request_irq(TIMER_INTR_VECT, gpio_poll_timer_interrupt,
- IRQF_SHARED | IRQF_DISABLED,"gpio poll", &alarmlist)) {
- printk("err: timer0 irq for gpio\n");
-@@ -757,6 +989,10 @@
- intr_mask.gen_io = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-
-+#ifdef CONFIG_ETRAX_VIRTUAL_GPIO
-+ virtual_gpio_init();
-+#endif
-+
- return res;
- }
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.c 2006-11-06 16:48:06.000000000 +0100
-@@ -8,11 +8,11 @@
- *!
- *! Nov 30 1998 Torbjorn Eliasson Initial version.
- *! Bjorn Wesen Elinux kernel version.
--*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff -
-+*! Jan 14 2000 Johan Adolfsson Fixed PB shadow register stuff -
- *! don't use PB_I2C if DS1302 uses same bits,
- *! use PB.
- *| June 23 2003 Pieter Grimmerink Added 'i2c_sendnack'. i2c_readreg now
--*| generates nack on last received byte,
-+*| generates nack on last received byte,
- *| instead of ack.
- *| i2c_getack changed data level while clock
- *| was high, causing DS75 to see a stop condition
-@@ -22,7 +22,7 @@
- *! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
- *!
- *!***************************************************************************/
--/* $Id: i2c.c,v 1.2 2005/05/09 15:29:49 starvik Exp $ */
-+/* $Id: i2c.c,v 1.6 2006/11/06 15:48:06 imres Exp $ */
- /****************** INCLUDE FILES SECTION ***********************************/
-
- #include <linux/module.h>
-@@ -60,8 +60,8 @@
- #define I2C_DATA_HIGH 1
- #define I2C_DATA_LOW 0
-
--#define i2c_enable()
--#define i2c_disable()
-+#define i2c_enable()
-+#define i2c_disable()
-
- /* enable or disable output-enable, to select output or input on the i2c bus */
-
-@@ -79,6 +79,8 @@
-
- #define i2c_delay(usecs) udelay(usecs)
-
-+static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
-+
- /****************** VARIABLE SECTION ************************************/
-
- static struct crisv32_iopin cris_i2c_clk;
-@@ -154,7 +156,7 @@
- } else {
- i2c_data(I2C_DATA_LOW);
- }
--
-+
- i2c_delay(CLOCK_LOW_TIME/2);
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
-@@ -213,7 +215,7 @@
- }
- i2c_clk(I2C_CLOCK_HIGH);
- i2c_delay(CLOCK_HIGH_TIME);
--
-+
- /*
- * we leave the clock low, getbyte is usually followed
- * by sendack/nack, they assume the clock to be low
-@@ -252,6 +254,7 @@
- * generate ACK clock pulse
- */
- i2c_clk(I2C_CLOCK_HIGH);
-+#if 0
- /*
- * Use PORT PB instead of I2C
- * for input. (I2C not working)
-@@ -264,6 +267,8 @@
- i2c_data(1);
- i2c_disable();
- i2c_dir_in();
-+#endif
-+
- /*
- * now wait for ack
- */
-@@ -285,13 +290,15 @@
- * before we enable our output. If we keep data high
- * and enable output, we would generate a stop condition.
- */
-+#if 0
- i2c_data(I2C_DATA_LOW);
--
-+
- /*
- * end clock pulse
- */
- i2c_enable();
- i2c_dir_out();
-+#endif
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_HIGH_TIME/4);
- /*
-@@ -338,7 +345,7 @@
- */
- i2c_data(I2C_DATA_HIGH);
- i2c_delay(CLOCK_LOW_TIME);
--
-+
- i2c_dir_in();
- }
-
-@@ -369,24 +376,160 @@
- i2c_delay(CLOCK_HIGH_TIME);
- i2c_clk(I2C_CLOCK_LOW);
- i2c_delay(CLOCK_LOW_TIME);
--
-+
- i2c_dir_in();
- }
-
- /*#---------------------------------------------------------------------------
- *#
-+*# FUNCTION NAME: i2c_write
-+*#
-+*# DESCRIPTION : Writes a value to an I2C device
-+*#
-+*#--------------------------------------------------------------------------*/
-+int
-+i2c_write(unsigned char theSlave, void *data, size_t nbytes)
-+{
-+ int error, cntr = 3;
-+ unsigned char bytes_wrote = 0;
-+ unsigned char value;
-+ unsigned long flags;
-+
-+ spin_lock(&i2c_lock);
-+
-+ do {
-+ error = 0;
-+ /*
-+ * we don't like to be interrupted
-+ */
-+ local_irq_save(flags);
-+
-+ i2c_start();
-+ /*
-+ * send slave address
-+ */
-+ i2c_outbyte((theSlave & 0xfe));
-+ /*
-+ * wait for ack
-+ */
-+ if(!i2c_getack())
-+ error = 1;
-+ /*
-+ * send data
-+ */
-+ for (bytes_wrote = 0; bytes_wrote < nbytes; bytes_wrote++) {
-+ memcpy(&value, data + bytes_wrote, sizeof value);
-+ i2c_outbyte(value);
-+ /*
-+ * now it's time to wait for ack
-+ */
-+ if (!i2c_getack())
-+ error |= 4;
-+ }
-+ /*
-+ * end byte stream
-+ */
-+ i2c_stop();
-+ /*
-+ * enable interrupt again
-+ */
-+ local_irq_restore(flags);
-+
-+ } while(error && cntr--);
-+
-+ i2c_delay(CLOCK_LOW_TIME);
-+
-+ spin_unlock(&i2c_lock);
-+
-+ return -error;
-+}
-+
-+/*#---------------------------------------------------------------------------
-+*#
-+*# FUNCTION NAME: i2c_read
-+*#
-+*# DESCRIPTION : Reads a value from an I2C device
-+*#
-+*#--------------------------------------------------------------------------*/
-+int
-+i2c_read(unsigned char theSlave, void *data, size_t nbytes)
-+{
-+ unsigned char b = 0;
-+ unsigned char bytes_read = 0;
-+ int error, cntr = 3;
-+ unsigned long flags;
-+
-+ spin_lock(&i2c_lock);
-+
-+ do {
-+ error = 0;
-+ memset(data, 0, nbytes);
-+ /*
-+ * we don't like to be interrupted
-+ */
-+ local_irq_save(flags);
-+ /*
-+ * generate start condition
-+ */
-+ i2c_start();
-+
-+ /*
-+ * send slave address
-+ */
-+ i2c_outbyte((theSlave | 0x01));
-+ /*
-+ * wait for ack
-+ */
-+ if(!i2c_getack())
-+ error = 1;
-+ /*
-+ * fetch data
-+ */
-+ for (bytes_read = 0; bytes_read < nbytes; bytes_read++) {
-+ b = i2c_inbyte();
-+ memcpy(data + bytes_read, &b, sizeof b);
-+
-+ if (bytes_read < (nbytes - 1)) {
-+ i2c_sendack();
-+ }
-+ }
-+ /*
-+ * last received byte needs to be nacked
-+ * instead of acked
-+ */
-+ i2c_sendnack();
-+ /*
-+ * end sequence
-+ */
-+ i2c_stop();
-+ /*
-+ * enable interrupt again
-+ */
-+ local_irq_restore(flags);
-+
-+ } while(error && cntr--);
-+
-+ spin_unlock(&i2c_lock);
-+
-+ return -error;
-+}
-+
-+/*#---------------------------------------------------------------------------
-+*#
- *# FUNCTION NAME: i2c_writereg
- *#
- *# DESCRIPTION : Writes a value to an I2C device
- *#
- *#--------------------------------------------------------------------------*/
- int
--i2c_writereg(unsigned char theSlave, unsigned char theReg,
-+i2c_writereg(unsigned char theSlave, unsigned char theReg,
- unsigned char theValue)
- {
- int error, cntr = 3;
- unsigned long flags;
-
-+ spin_lock(&i2c_lock);
-+
- do {
- error = 0;
- /*
-@@ -431,10 +574,12 @@
- * enable interrupt again
- */
- local_irq_restore(flags);
--
-+
- } while(error && cntr--);
-
- i2c_delay(CLOCK_LOW_TIME);
-+
-+ spin_unlock(&i2c_lock);
-
- return -error;
- }
-@@ -453,6 +598,8 @@
- int error, cntr = 3;
- unsigned long flags;
-
-+ spin_lock(&i2c_lock);
-+
- do {
- error = 0;
- /*
-@@ -463,7 +610,7 @@
- * generate start condition
- */
- i2c_start();
--
-+
- /*
- * send slave address
- */
-@@ -482,7 +629,7 @@
- * now it's time to wait for ack
- */
- if(!i2c_getack())
-- error = 1;
-+ error |= 2;
- /*
- * repeat start condition
- */
-@@ -496,7 +643,7 @@
- * wait for ack
- */
- if(!i2c_getack())
-- error = 1;
-+ error |= 4;
- /*
- * fetch register
- */
-@@ -514,9 +661,11 @@
- * enable interrupt again
- */
- local_irq_restore(flags);
--
-+
- } while(error && cntr--);
-
-+ spin_unlock(&i2c_lock);
-+
- return b;
- }
-
-@@ -546,7 +695,7 @@
- switch (_IOC_NR(cmd)) {
- case I2C_WRITEREG:
- /* write to an i2c slave */
-- D(printk("i2cw %d %d %d\n",
-+ D(printk("i2cw %d %d %d\n",
- I2C_ARGSLAVE(arg),
- I2C_ARGREG(arg),
- I2C_ARGVALUE(arg)));
-@@ -558,18 +707,18 @@
- {
- unsigned char val;
- /* read from an i2c slave */
-- D(printk("i2cr %d %d ",
-+ D(printk("i2cr %d %d ",
- I2C_ARGSLAVE(arg),
- I2C_ARGREG(arg)));
- val = i2c_readreg(I2C_ARGSLAVE(arg), I2C_ARGREG(arg));
- D(printk("= %d\n", val));
- return val;
-- }
-+ }
- default:
- return -EINVAL;
-
- }
--
-+
- return 0;
- }
-
-@@ -583,28 +732,53 @@
- int __init
- i2c_init(void)
- {
-- int res;
-+ static int res = 0;
-+ static int first = 1;
-+
-+ if (!first) {
-+ return res;
-+ }
-+ first = 0;
-
-- /* Setup and enable the Port B I2C interface */
-+ /* Setup and enable the DATA and CLK pins */
-
-- crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT);
-- crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT);
-+ res = crisv32_io_get_name(&cris_i2c_data, CONFIG_ETRAX_I2C_DATA_PORT);
-+ if (res < 0) {
-+ return res;
-+ }
-+
-+ res = crisv32_io_get_name(&cris_i2c_clk, CONFIG_ETRAX_I2C_CLK_PORT);
-+ crisv32_io_set_dir(&cris_i2c_clk, crisv32_io_dir_out);
-+
-+ return res;
-+}
-
-- /* register char device */
-
-+int __init
-+i2c_register(void)
-+{
-+
-+ int res;
-+
-+ res = i2c_init();
-+ if (res < 0) {
-+ return res;
-+ }
-+
-+ /* register char device */
- res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
- if(res < 0) {
- printk(KERN_ERR "i2c: couldn't get a major number.\n");
- return res;
- }
-
-- printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
--
-+ printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
-+
- return 0;
- }
-
- /* this makes sure that i2c_init is called during boot */
-
--module_init(i2c_init);
-+module_init(i2c_register);
-
- /****************** END OF FILE i2c.c ********************************/
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.h linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/i2c.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/i2c.h 2006-11-06 16:48:06.000000000 +0100
-@@ -3,6 +3,8 @@
-
- /* High level I2C actions */
- int __init i2c_init(void);
-+int i2c_write(unsigned char theSlave, void *data, size_t nbytes);
-+int i2c_read(unsigned char theSlave, void *data, size_t nbytes);
- int i2c_writereg(unsigned char theSlave, unsigned char theReg, unsigned char theValue);
- unsigned char i2c_readreg(unsigned char theSlave, unsigned char theReg);
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/iop_fw_load.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/iop_fw_load.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/iop_fw_load.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/iop_fw_load.c 2005-04-07 11:27:46.000000000 +0200
-@@ -67,12 +67,12 @@
- return -ENODEV;
-
- /* get firmware */
-- retval = request_firmware(&fw_entry,
-- fw_name,
-+ retval = request_firmware(&fw_entry,
-+ fw_name,
- &iop_spu_device[spu_inst]);
- if (retval != 0)
- {
-- printk(KERN_ERR
-+ printk(KERN_ERR
- "iop_load_spu: Failed to load firmware \"%s\"\n",
- fw_name);
- return retval;
-@@ -123,7 +123,7 @@
- return retval;
- }
-
--int iop_fw_load_mpu(unsigned char *fw_name)
-+int iop_fw_load_mpu(unsigned char *fw_name)
- {
- const unsigned int start_addr = 0;
- reg_iop_mpu_rw_ctrl mpu_ctrl;
-@@ -135,13 +135,13 @@
- retval = request_firmware(&fw_entry, fw_name, &iop_mpu_device);
- if (retval != 0)
- {
-- printk(KERN_ERR
-+ printk(KERN_ERR
- "iop_load_spu: Failed to load firmware \"%s\"\n",
- fw_name);
- return retval;
- }
- data = (u32 *) fw_entry->data;
--
-+
- /* disable MPU */
- mpu_ctrl.en = regk_iop_mpu_no;
- REG_WR(iop_mpu, regi_iop_mpu, rw_ctrl, mpu_ctrl);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/nandflash.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/nandflash.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/nandflash.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/nandflash.c 2006-10-16 14:56:46.000000000 +0200
-@@ -5,8 +5,8 @@
- *
- * Derived from drivers/mtd/nand/spia.c
- * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
-- *
-- * $Id: nandflash.c,v 1.3 2005/06/01 10:57:12 starvik Exp $
-+ *
-+ * $Id: nandflash.c,v 1.8 2006/10/16 12:56:46 ricardw Exp $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -32,37 +32,53 @@
- #define ALE_BIT 6
- #define BY_BIT 7
-
-+/* Bitmask for control pins */
-+#define PIN_BITMASK ((1 << CE_BIT) | (1 << CLE_BIT) | (1 << ALE_BIT))
-+
-+/* Bitmask for mtd nand control bits */
-+#define CTRL_BITMASK (NAND_NCE | NAND_CLE | NAND_ALE)
-+
-+
- static struct mtd_info *crisv32_mtd = NULL;
--/*
-+/*
- * hardware specific access to control-lines
- */
--static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd)
-+static void crisv32_hwcontrol(struct mtd_info *mtd, int cmd,
-+ unsigned int ctrl)
- {
- unsigned long flags;
-- reg_gio_rw_pa_dout dout = REG_RD(gio, regi_gio, rw_pa_dout);
-+ reg_gio_rw_pa_dout dout;
-+ struct nand_chip *this = mtd->priv;
-
- local_irq_save(flags);
-- switch(cmd){
-- case NAND_CTL_SETCLE:
-- dout.data |= (1<<CLE_BIT);
-- break;
-- case NAND_CTL_CLRCLE:
-- dout.data &= ~(1<<CLE_BIT);
-- break;
-- case NAND_CTL_SETALE:
-- dout.data |= (1<<ALE_BIT);
-- break;
-- case NAND_CTL_CLRALE:
-- dout.data &= ~(1<<ALE_BIT);
-- break;
-- case NAND_CTL_SETNCE:
-- dout.data |= (1<<CE_BIT);
-- break;
-- case NAND_CTL_CLRNCE:
-- dout.data &= ~(1<<CE_BIT);
-- break;
-+
-+ /* control bits change */
-+ if (ctrl & NAND_CTRL_CHANGE) {
-+ dout = REG_RD(gio, regi_gio, rw_pa_dout);
-+ dout.data &= ~PIN_BITMASK;
-+
-+#if (CE_BIT == 4 && NAND_NCE == 1 && \
-+ CLE_BIT == 5 && NAND_CLE == 2 && \
-+ ALE_BIT == 6 && NAND_ALE == 4)
-+ /* Pins in same order as control bits, but shifted.
-+ * Optimize for this case; works for 2.6.18 */
-+ dout.data |= ((ctrl & CTRL_BITMASK) ^ NAND_NCE) << CE_BIT;
-+#else
-+ /* the slow way */
-+ if (!(ctrl & NAND_NCE))
-+ dout.data |= (1 << CE_BIT);
-+ if (ctrl & NAND_CLE)
-+ dout.data |= (1 << CLE_BIT);
-+ if (ctrl & NAND_ALE)
-+ dout.data |= (1 << ALE_BIT);
-+#endif
-+ REG_WR(gio, regi_gio, rw_pa_dout, dout);
- }
-- REG_WR(gio, regi_gio, rw_pa_dout, dout);
-+
-+ /* command to chip */
-+ if (cmd != NAND_CMD_NONE)
-+ writeb(cmd, this->IO_ADDR_W);
-+
- local_irq_restore(flags);
- }
-
-@@ -129,26 +145,26 @@
- /* Set address of NAND IO lines */
- this->IO_ADDR_R = read_cs;
- this->IO_ADDR_W = write_cs;
-- this->hwcontrol = crisv32_hwcontrol;
-+ this->cmd_ctrl = crisv32_hwcontrol;
- this->dev_ready = crisv32_device_ready;
- /* 20 us command delay time */
-- this->chip_delay = 20;
-- this->eccmode = NAND_ECC_SOFT;
-+ this->chip_delay = 20;
-+ this->ecc.mode = NAND_ECC_SOFT;
-
- /* Enable the following for a flash based bad block table */
-- this->options = NAND_USE_FLASH_BBT;
-+ /* this->options = NAND_USE_FLASH_BBT; */
-
- /* Scan to find existance of the device */
- if (nand_scan (crisv32_mtd, 1)) {
- err = -ENXIO;
- goto out_ior;
- }
--
-+
- return crisv32_mtd;
--
-+
- out_ior:
- iounmap((void *)read_cs);
-- iounmap((void *)write_cs);
-+ iounmap((void *)write_cs);
- out_mtd:
- kfree (crisv32_mtd);
- return NULL;
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pcf8563.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pcf8563.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pcf8563.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pcf8563.c 2006-10-27 17:22:13.000000000 +0200
-@@ -10,7 +10,7 @@
- * 400 kbits/s. The built-in word address register is incremented
- * automatically after each written or read byte.
- *
-- * Copyright (c) 2002-2003, Axis Communications AB
-+ * Copyright (c) 2002-2006, Axis Communications AB
- * All rights reserved.
- *
- * Author: Tobias Anderberg <tobiasa@axis.com>.
-@@ -37,24 +37,27 @@
- #define PCF8563_MAJOR 121 /* Local major number. */
- #define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
- #define PCF8563_NAME "PCF8563"
--#define DRIVER_VERSION "$Revision: 1.1 $"
-+#define DRIVER_VERSION "$Revision: 1.9 $"
-
- /* Two simple wrapper macros, saves a few keystrokes. */
- #define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
- #define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
-
-+static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
-+
- static const unsigned char days_in_month[] =
- { 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
- int pcf8563_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
--int pcf8563_open(struct inode *, struct file *);
--int pcf8563_release(struct inode *, struct file *);
-+
-+/* Cache VL bit value read at driver init since writing the RTC_SECOND
-+ * register clears the VL status.
-+ */
-+static int voltage_low = 0;
-
- static struct file_operations pcf8563_fops = {
- owner: THIS_MODULE,
- ioctl: pcf8563_ioctl,
-- open: pcf8563_open,
-- release: pcf8563_release,
- };
-
- unsigned char
-@@ -62,7 +65,7 @@
- {
- unsigned char res = rtc_read(reg);
-
-- /* The PCF8563 does not return 0 for unimplemented bits */
-+ /* The PCF8563 does not return 0 for unimplemented bits. */
- switch (reg) {
- case RTC_SECONDS:
- case RTC_MINUTES:
-@@ -95,11 +98,6 @@
- void
- pcf8563_writereg(int reg, unsigned char val)
- {
--#ifdef CONFIG_ETRAX_RTC_READONLY
-- if (reg == RTC_CONTROL1 || (reg >= RTC_SECONDS && reg <= RTC_YEAR))
-- return;
--#endif
--
- rtc_write(reg, val);
- }
-
-@@ -114,11 +112,13 @@
- tm->tm_mon = rtc_read(RTC_MONTH);
- tm->tm_year = rtc_read(RTC_YEAR);
-
-- if (tm->tm_sec & 0x80)
-+ if (tm->tm_sec & 0x80) {
- printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
- "information is no longer guaranteed!\n", PCF8563_NAME);
-+ }
-
-- tm->tm_year = BCD_TO_BIN(tm->tm_year) + ((tm->tm_mon & 0x80) ? 100 : 0);
-+ tm->tm_year = BCD_TO_BIN(tm->tm_year) +
-+ ((tm->tm_mon & 0x80) ? 100 : 0);
- tm->tm_sec &= 0x7F;
- tm->tm_min &= 0x7F;
- tm->tm_hour &= 0x3F;
-@@ -137,8 +137,20 @@
- int __init
- pcf8563_init(void)
- {
-+ static int res = 0;
-+ static int first = 1;
-+
-+ if (!first) {
-+ return res;
-+ }
-+ first = 0;
-+
- /* Initiate the i2c protocol. */
-- i2c_init();
-+ res = i2c_init();
-+ if (res < 0) {
-+ printk(KERN_CRIT "pcf8563_init: Failed to init i2c.\n");
-+ return res;
-+ }
-
- /*
- * First of all we need to reset the chip. This is done by
-@@ -170,31 +182,28 @@
- if (rtc_write(RTC_WEEKDAY_ALARM, 0x80) < 0)
- goto err;
-
-- if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-- printk(KERN_INFO "%s: Unable to get major numer %d for RTC device.\n",
-- PCF8563_NAME, PCF8563_MAJOR);
-- return -1;
-+ /* Check for low voltage, and warn about it. */
-+ if (rtc_read(RTC_SECONDS) & 0x80) {
-+ voltage_low = 1;
-+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-+ "date/time information is no longer guaranteed!\n",
-+ PCF8563_NAME);
- }
-
-- printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
--
-- /* Check for low voltage, and warn about it.. */
-- if (rtc_read(RTC_SECONDS) & 0x80)
-- printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-- "information is no longer guaranteed!\n", PCF8563_NAME);
--
-- return 0;
-+ return res;
-
- err:
- printk(KERN_INFO "%s: Error initializing chip.\n", PCF8563_NAME);
-- return -1;
-+ res = -1;
-+ return res;
- }
-
- void __exit
- pcf8563_exit(void)
- {
- if (unregister_chrdev(PCF8563_MAJOR, DEVICE_NAME) < 0) {
-- printk(KERN_INFO "%s: Unable to unregister device.\n", PCF8563_NAME);
-+ printk(KERN_INFO "%s: Unable to unregister device.\n",
-+ PCF8563_NAME);
- }
- }
-
-@@ -203,7 +212,8 @@
- * POSIX says so!
- */
- int
--pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long arg)
-+pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
-+ unsigned long arg)
- {
- /* Some sanity checks. */
- if (_IOC_TYPE(cmd) != RTC_MAGIC)
-@@ -217,31 +227,35 @@
- {
- struct rtc_time tm;
-
-- memset(&tm, 0, sizeof (struct rtc_time));
-+ spin_lock(&rtc_lock);
-+ memset(&tm, 0, sizeof tm);
- get_rtc_time(&tm);
-
-- if (copy_to_user((struct rtc_time *) arg, &tm, sizeof tm)) {
-+ if (copy_to_user((struct rtc_time *) arg, &tm,
-+ sizeof tm)) {
-+ spin_unlock(&rtc_lock);
- return -EFAULT;
- }
-
-+ spin_unlock(&rtc_lock);
-+
- return 0;
- }
--
- case RTC_SET_TIME:
- {
--#ifdef CONFIG_ETRAX_RTC_READONLY
-- return -EPERM;
--#else
- int leap;
- int year;
- int century;
- struct rtc_time tm;
-
-+ memset(&tm, 0, sizeof tm);
- if (!capable(CAP_SYS_TIME))
- return -EPERM;
-
-- if (copy_from_user(&tm, (struct rtc_time *) arg, sizeof tm))
-+ if (copy_from_user(&tm, (struct rtc_time *) arg,
-+ sizeof tm)) {
- return -EFAULT;
-+ }
-
- /* Convert from struct tm to struct rtc_time. */
- tm.tm_year += 1900;
-@@ -253,7 +267,8 @@
- * that years divisible by 400 _are_ leap years.
- */
- year = tm.tm_year;
-- leap = (tm.tm_mon == 2) && ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-+ leap = (tm.tm_mon == 2) &&
-+ ((year % 4 == 0 && year % 100 != 0) || year % 400 == 0);
-
- /* Perform some sanity checks. */
- if ((tm.tm_year < 1970) ||
-@@ -263,19 +278,23 @@
- (tm.tm_wday >= 7) ||
- (tm.tm_hour >= 24) ||
- (tm.tm_min >= 60) ||
-- (tm.tm_sec >= 60))
-+ (tm.tm_sec >= 60)) {
- return -EINVAL;
-+ }
-
- century = (tm.tm_year >= 2000) ? 0x80 : 0;
- tm.tm_year = tm.tm_year % 100;
-
- BIN_TO_BCD(tm.tm_year);
-+ BIN_TO_BCD(tm.tm_mon);
- BIN_TO_BCD(tm.tm_mday);
- BIN_TO_BCD(tm.tm_hour);
- BIN_TO_BCD(tm.tm_min);
- BIN_TO_BCD(tm.tm_sec);
- tm.tm_mon |= century;
-
-+ spin_lock(&rtc_lock);
-+
- rtc_write(RTC_YEAR, tm.tm_year);
- rtc_write(RTC_MONTH, tm.tm_mon);
- rtc_write(RTC_WEEKDAY, tm.tm_wday); /* Not coded in BCD. */
-@@ -284,36 +303,40 @@
- rtc_write(RTC_MINUTES, tm.tm_min);
- rtc_write(RTC_SECONDS, tm.tm_sec);
-
-+ spin_unlock(&rtc_lock);
-+
- return 0;
--#endif /* !CONFIG_ETRAX_RTC_READONLY */
- }
--
- case RTC_VLOW_RD:
-- {
-- int vl_bit = 0;
--
-- if (rtc_read(RTC_SECONDS) & 0x80) {
-- vl_bit = 1;
-- printk(KERN_WARNING "%s: RTC Voltage Low - reliable "
-- "date/time information is no longer guaranteed!\n",
-- PCF8563_NAME);
-+ if (voltage_low) {
-+ printk(KERN_WARNING "%s: RTC Voltage Low - "
-+ "reliable date/time information is no "
-+ "longer guaranteed!\n", PCF8563_NAME);
- }
-- if (copy_to_user((int *) arg, &vl_bit, sizeof(int)))
-- return -EFAULT;
-
-+ if (copy_to_user((int *) arg, &voltage_low, sizeof(int))) {
-+ return -EFAULT;
-+ }
-+
- return 0;
-- }
-
- case RTC_VLOW_SET:
- {
-- /* Clear the VL bit in the seconds register */
-+ /* Clear the VL bit in the seconds register in case
-+ * the time has not been set already (which would
-+ * have cleared it). This does not really matter
-+ * because of the cached voltage_low value but do it
-+ * anyway for consistency. */
-+
- int ret = rtc_read(RTC_SECONDS);
-
- rtc_write(RTC_SECONDS, (ret & 0x7F));
-
-+ /* Clear the cached value. */
-+ voltage_low = 0;
-+
- return 0;
- }
--
- default:
- return -ENOTTY;
- }
-@@ -321,17 +344,32 @@
- return 0;
- }
-
--int
--pcf8563_open(struct inode *inode, struct file *filp)
-+static int __init
-+pcf8563_register(void)
- {
-- return 0;
--}
-+ if (pcf8563_init() < 0) {
-+ printk(KERN_INFO "%s: Unable to initialize Real-Time Clock "
-+ "Driver, %s\n", PCF8563_NAME, DRIVER_VERSION);
-+ return -1;
-+ }
-+
-+ if (register_chrdev(PCF8563_MAJOR, DEVICE_NAME, &pcf8563_fops) < 0) {
-+ printk(KERN_INFO "%s: Unable to get major numer %d for RTC "
-+ "device.\n", PCF8563_NAME, PCF8563_MAJOR);
-+ return -1;
-+ }
-+
-+ printk(KERN_INFO "%s Real-Time Clock Driver, %s\n", PCF8563_NAME,
-+ DRIVER_VERSION);
-+
-+ /* Check for low voltage, and warn about it. */
-+ if (voltage_low) {
-+ printk(KERN_WARNING "%s: RTC Voltage Low - reliable date/time "
-+ "information is no longer guaranteed!\n", PCF8563_NAME);
-+ }
-
--int
--pcf8563_release(struct inode *inode, struct file *filp)
--{
- return 0;
- }
-
--module_init(pcf8563_init);
-+module_init(pcf8563_register);
- module_exit(pcf8563_exit);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/bios.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/bios.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/bios.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/bios.c 2006-10-13 14:43:15.000000000 +0200
-@@ -60,7 +60,7 @@
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
--
-+
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/dma.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/dma.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/pci/dma.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/pci/dma.c 2005-10-31 09:48:04.000000000 +0100
-@@ -62,7 +62,7 @@
- {
- struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
- int order = get_order(size);
--
-+
- if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
- int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-@@ -120,7 +120,7 @@
- void dma_release_declared_memory(struct device *dev)
- {
- struct dma_coherent_mem *mem = dev->dma_mem;
--
-+
- if(!mem)
- return;
- dev->dma_mem = NULL;
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/drivers/sync_serial.c linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/sync_serial.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/drivers/sync_serial.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/drivers/sync_serial.c 2007-01-09 10:29:20.000000000 +0100
-@@ -50,7 +50,7 @@
- /* readp writep */
- /* */
- /* If the application keeps up the pace readp will be right after writep.*/
--/* If the application can't keep the pace we have to throw away data. */
-+/* If the application can't keep the pace we have to throw away data. */
- /* The idea is that readp should be ready with the data pointed out by */
- /* Descr[i] when the DMA has filled in Descr[i+1]. */
- /* Otherwise we will discard */
-@@ -65,6 +65,7 @@
- #define IN_DESCR_SIZE 256
- #define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
- #define OUT_BUFFER_SIZE 4096
-+#define NUM_OUT_DESCRS 4
-
- #define DEFAULT_FRAME_RATE 0
- #define DEFAULT_WORD_RATE 7
-@@ -112,7 +113,7 @@
-
- dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16)));
- dma_descr_context in_context __attribute__ ((__aligned__(32)));
-- dma_descr_data out_descr __attribute__ ((__aligned__(16)));
-+ dma_descr_data out_descr[NUM_OUT_DESCRS] __attribute__ ((__aligned__(16)));
- dma_descr_context out_context __attribute__ ((__aligned__(32)));
- wait_queue_head_t out_wait_q;
- wait_queue_head_t in_wait_q;
-@@ -130,9 +131,9 @@
-
- static int sync_serial_ioctl(struct inode*, struct file*,
- unsigned int cmd, unsigned long arg);
--static ssize_t sync_serial_write(struct file * file, const char * buf,
-+static ssize_t sync_serial_write(struct file * file, const char * buf,
- size_t count, loff_t *ppos);
--static ssize_t sync_serial_read(struct file *file, char *buf,
-+static ssize_t sync_serial_read(struct file *file, char *buf,
- size_t count, loff_t *ppos);
-
- #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
-@@ -146,8 +147,8 @@
- static void start_dma(struct sync_port *port, const char* data, int count);
- static void start_dma_in(sync_port* port);
- #ifdef SYNC_SER_DMA
--static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs);
--static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-+static irqreturn_t tr_interrupt(int irq, void *dev_id);
-+static irqreturn_t rx_interrupt(int irq, void *dev_id);
- #endif
-
- #if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
-@@ -157,7 +158,7 @@
- #define SYNC_SER_MANUAL
- #endif
- #ifdef SYNC_SER_MANUAL
--static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs);
-+static irqreturn_t manual_interrupt(int irq, void *dev_id);
- #endif
-
- /* The ports */
-@@ -201,8 +202,8 @@
- {
- ports[0].enabled = 0;
- ports[1].enabled = 0;
--
-- if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 )
-+
-+ if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 )
- {
- printk("unable to get major for synchronous serial port\n");
- return -EBUSY;
-@@ -243,13 +244,13 @@
-
- DEBUG(printk("Init sync serial port %d\n", portnbr));
-
-- port->port_nbr = portnbr;
-+ port->port_nbr = portnbr;
- port->init_irqs = 1;
-
- port->outp = port->out_buffer;
- port->output = 1;
- port->input = 0;
--
-+
- port->readp = port->flip;
- port->writep = port->flip;
- port->in_buffer_size = IN_BUFFER_SIZE;
-@@ -286,11 +287,16 @@
- tr_cfg.sample_size = 7;
- tr_cfg.sh_dir = regk_sser_msbfirst;
- tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no;
-+#if 0
- tr_cfg.rate_ctrl = regk_sser_bulk;
- tr_cfg.data_pin_use = regk_sser_dout;
-+#else
-+ tr_cfg.rate_ctrl = regk_sser_iso;
-+ tr_cfg.data_pin_use = regk_sser_dout;
-+#endif
- tr_cfg.bulk_wspace = 1;
- REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
--
-+
- rec_cfg.sample_size = 7;
- rec_cfg.sh_dir = regk_sser_msbfirst;
- rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no;
-@@ -303,17 +309,17 @@
- int avail;
- unsigned char *start;
- unsigned char *end;
--
-+
- start = (unsigned char*)port->readp; /* cast away volatile */
- end = (unsigned char*)port->writep; /* cast away volatile */
- /* 0123456789 0123456789
- * ----- - -----
- * ^rp ^wp ^wp ^rp
- */
--
-+
- if (end >= start)
- avail = end - start;
-- else
-+ else
- avail = port->in_buffer_size - (start - end);
- return avail;
- }
-@@ -323,17 +329,17 @@
- int avail;
- unsigned char *start;
- unsigned char *end;
--
-+
- start = (unsigned char*)port->readp; /* cast away volatile */
- end = (unsigned char*)port->writep; /* cast away volatile */
- /* 0123456789 0123456789
- * ----- -----
- * ^rp ^wp ^wp ^rp
- */
--
-+
- if (end >= start)
- avail = end - start;
-- else
-+ else
- avail = port->flip + port->in_buffer_size - start;
- return avail;
- }
-@@ -343,10 +349,10 @@
- int dev = iminor(inode);
- sync_port* port;
- reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
-- reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
--
-- DEBUG(printk("Open sync serial port %d\n", dev));
-+ reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
-
-+ DEBUG(printk("Open sync serial port %d\n", dev));
-+
- if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
- {
- DEBUG(printk("Invalid minor %d\n", dev));
-@@ -354,7 +360,7 @@
- }
- port = &ports[dev];
- /* Allow open this device twice (assuming one reader and one writer) */
-- if (port->busy == 2)
-+ if (port->busy == 2)
- {
- DEBUG(printk("Device is busy.. \n"));
- return -EBUSY;
-@@ -422,8 +428,8 @@
- DMA_VERBOSE_ON_ERROR,
- 0,
- dma_sser1)) {
-- free_irq(21, &ports[1]);
-- free_irq(20, &ports[1]);
-+ free_irq(DMA6_INTR_VECT, &ports[1]);
-+ free_irq(DMA7_INTR_VECT, &ports[1]);
- printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel");
- return -EBUSY;
- } else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR,
-@@ -446,7 +452,7 @@
- /* Enable DMA IRQs */
- REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask);
- REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask);
-- /* Set up wordsize = 2 for DMAs. */
-+ /* Set up wordsize = 1 for DMAs. */
- DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1);
- DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1);
-
-@@ -497,7 +503,7 @@
- port = &ports[dev];
- if (port->busy)
- port->busy--;
-- if (!port->busy)
-+ if (!port->busy)
- /* XXX */ ;
- return 0;
- }
-@@ -508,17 +514,29 @@
- unsigned int mask = 0;
- sync_port* port;
- DEBUGPOLL( static unsigned int prev_mask = 0; );
--
-+
- port = &ports[dev];
-+
-+ if (!port->started)
-+ {
-+ reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg);
-+ reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
-+ cfg.en = regk_sser_yes;
-+ rec_cfg.rec_en = port->input;
-+ REG_WR(sser, port->regi_sser, rw_cfg, cfg);
-+ REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
-+ port->started = 1;
-+ }
-+
- poll_wait(file, &port->out_wait_q, wait);
- poll_wait(file, &port->in_wait_q, wait);
- /* Some room to write */
-- if (port->out_count < OUT_BUFFER_SIZE)
-+ if (port->output && port->out_count < OUT_BUFFER_SIZE)
- mask |= POLLOUT | POLLWRNORM;
- /* At least an inbufchunk of data */
-- if (sync_data_avail(port) >= port->inbufchunk)
-+ if (port->input && sync_data_avail(port) >= port->inbufchunk)
- mask |= POLLIN | POLLRDNORM;
--
-+
- DEBUGPOLL(if (mask != prev_mask)
- printk("sync_serial_poll: mask 0x%08X %s %s\n", mask,
- mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":"");
-@@ -531,14 +549,15 @@
- unsigned int cmd, unsigned long arg)
- {
- int return_val = 0;
-+ int dma_w_size = regk_dma_set_w_size1;
- int dev = iminor(file->f_dentry->d_inode);
- sync_port* port;
- reg_sser_rw_tr_cfg tr_cfg;
- reg_sser_rw_rec_cfg rec_cfg;
-- reg_sser_rw_frm_cfg frm_cfg;
-+ reg_sser_rw_frm_cfg frm_cfg;
- reg_sser_rw_cfg gen_cfg;
- reg_sser_rw_intr_mask intr_mask;
--
-+
- if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
- {
- DEBUG(printk("Invalid minor %d\n", dev));
-@@ -558,9 +577,32 @@
- case SSP_SPEED:
- if (GET_SPEED(arg) == CODEC)
- {
-+ unsigned int freq;
-+
- gen_cfg.base_freq = regk_sser_f32;
-- /* FREQ = 0 => 4 MHz => clk_div = 7*/
-- gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg));
-+
-+ /* Clock divider will internally be
-+ * gen_cfg.clk_div + 1.
-+ */
-+
-+ freq = GET_FREQ(arg);
-+ switch (freq)
-+ {
-+ case FREQ_32kHz:
-+ case FREQ_64kHz:
-+ case FREQ_128kHz:
-+ case FREQ_256kHz:
-+ gen_cfg.clk_div = 125 * (1 << (freq - FREQ_256kHz)) - 1;
-+ break;
-+ case FREQ_512kHz:
-+ gen_cfg.clk_div = 62;
-+ break;
-+ case FREQ_1MHz:
-+ case FREQ_2MHz:
-+ case FREQ_4MHz:
-+ gen_cfg.clk_div = 8 * (1 << freq) - 1;
-+ break;
-+ }
- }
- else
- {
-@@ -625,87 +667,118 @@
- case MASTER_OUTPUT:
- port->output = 1;
- port->input = 0;
-+ frm_cfg.out_on = regk_sser_tr;
-+ frm_cfg.frame_pin_dir = regk_sser_out;
- gen_cfg.clk_dir = regk_sser_out;
- break;
- case SLAVE_OUTPUT:
- port->output = 1;
- port->input = 0;
-+ frm_cfg.frame_pin_dir = regk_sser_in;
- gen_cfg.clk_dir = regk_sser_in;
- break;
- case MASTER_INPUT:
- port->output = 0;
- port->input = 1;
-+ frm_cfg.frame_pin_dir = regk_sser_out;
-+ frm_cfg.out_on = regk_sser_intern_tb;
- gen_cfg.clk_dir = regk_sser_out;
- break;
- case SLAVE_INPUT:
- port->output = 0;
- port->input = 1;
-+ frm_cfg.frame_pin_dir = regk_sser_in;
- gen_cfg.clk_dir = regk_sser_in;
- break;
- case MASTER_BIDIR:
- port->output = 1;
- port->input = 1;
-+ frm_cfg.frame_pin_dir = regk_sser_out;
-+ frm_cfg.out_on = regk_sser_intern_tb;
- gen_cfg.clk_dir = regk_sser_out;
- break;
- case SLAVE_BIDIR:
- port->output = 1;
- port->input = 1;
-+ frm_cfg.frame_pin_dir = regk_sser_in;
- gen_cfg.clk_dir = regk_sser_in;
- break;
- default:
- spin_unlock_irq(&port->lock);
- return -EINVAL;
--
-+
- }
- if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT))
- intr_mask.rdav = regk_sser_yes;
- break;
- case SSP_FRAME_SYNC:
-- if (arg & NORMAL_SYNC)
-+ if (arg & NORMAL_SYNC) {
-+ frm_cfg.rec_delay = 1;
- frm_cfg.tr_delay = 1;
-+ }
- else if (arg & EARLY_SYNC)
-- frm_cfg.tr_delay = 0;
-+ frm_cfg.rec_delay = frm_cfg.tr_delay = 0;
-+ else if (arg & SECOND_WORD_SYNC) {
-+ frm_cfg.rec_delay = 17;
-+ frm_cfg.tr_delay = 1;
-+ }
-+
-+
-
- tr_cfg.bulk_wspace = frm_cfg.tr_delay;
- frm_cfg.early_wend = regk_sser_yes;
-- if (arg & BIT_SYNC)
-+ if (arg & BIT_SYNC)
- frm_cfg.type = regk_sser_edge;
- else if (arg & WORD_SYNC)
- frm_cfg.type = regk_sser_level;
- else if (arg & EXTENDED_SYNC)
- frm_cfg.early_wend = regk_sser_no;
--
-+
- if (arg & SYNC_ON)
- frm_cfg.frame_pin_use = regk_sser_frm;
- else if (arg & SYNC_OFF)
- frm_cfg.frame_pin_use = regk_sser_gio0;
--
-- if (arg & WORD_SIZE_8)
-+
-+ if (arg & WORD_SIZE_8) {
- rec_cfg.sample_size = tr_cfg.sample_size = 7;
-- else if (arg & WORD_SIZE_12)
-+ dma_w_size = regk_dma_set_w_size1;
-+ }
-+ else if (arg & WORD_SIZE_12) {
- rec_cfg.sample_size = tr_cfg.sample_size = 11;
-- else if (arg & WORD_SIZE_16)
-+ dma_w_size = regk_dma_set_w_size2;
-+ }
-+ else if (arg & WORD_SIZE_16) {
- rec_cfg.sample_size = tr_cfg.sample_size = 15;
-- else if (arg & WORD_SIZE_24)
-+ dma_w_size = regk_dma_set_w_size2;
-+ }
-+ else if (arg & WORD_SIZE_24) {
- rec_cfg.sample_size = tr_cfg.sample_size = 23;
-- else if (arg & WORD_SIZE_32)
-+ dma_w_size = regk_dma_set_w_size2;
-+ }
-+ else if (arg & WORD_SIZE_32) {
- rec_cfg.sample_size = tr_cfg.sample_size = 31;
-+ dma_w_size = regk_dma_set_w_size2;
-+ }
-
- if (arg & BIT_ORDER_MSB)
- rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst;
- else if (arg & BIT_ORDER_LSB)
- rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst;
--
-- if (arg & FLOW_CONTROL_ENABLE)
-+
-+ if (arg & FLOW_CONTROL_ENABLE) {
-+ frm_cfg.status_pin_use = regk_sser_frm;
- rec_cfg.fifo_thr = regk_sser_thr16;
-- else if (arg & FLOW_CONTROL_DISABLE)
-+ }
-+ else if (arg & FLOW_CONTROL_DISABLE) {
-+ frm_cfg.status_pin_use = regk_sser_gio0;
- rec_cfg.fifo_thr = regk_sser_inf;
-+ }
-
- if (arg & CLOCK_NOT_GATED)
- gen_cfg.gate_clk = regk_sser_no;
- else if (arg & CLOCK_GATED)
- gen_cfg.gate_clk = regk_sser_yes;
--
-+
- break;
- case SSP_IPOLARITY:
- /* NOTE!! negedge is considered NORMAL */
-@@ -713,12 +786,12 @@
- rec_cfg.clk_pol = regk_sser_neg;
- else if (arg & CLOCK_INVERT)
- rec_cfg.clk_pol = regk_sser_pos;
--
-+
- if (arg & FRAME_NORMAL)
- frm_cfg.level = regk_sser_pos_hi;
- else if (arg & FRAME_INVERT)
- frm_cfg.level = regk_sser_neg_lo;
--
-+
- if (arg & STATUS_NORMAL)
- gen_cfg.hold_pol = regk_sser_pos;
- else if (arg & STATUS_INVERT)
-@@ -726,15 +799,15 @@
- break;
- case SSP_OPOLARITY:
- if (arg & CLOCK_NORMAL)
-- gen_cfg.out_clk_pol = regk_sser_neg;
-- else if (arg & CLOCK_INVERT)
- gen_cfg.out_clk_pol = regk_sser_pos;
--
-+ else if (arg & CLOCK_INVERT)
-+ gen_cfg.out_clk_pol = regk_sser_neg;
-+
- if (arg & FRAME_NORMAL)
- frm_cfg.level = regk_sser_pos_hi;
- else if (arg & FRAME_INVERT)
- frm_cfg.level = regk_sser_neg_lo;
--
-+
- if (arg & STATUS_NORMAL)
- gen_cfg.hold_pol = regk_sser_pos;
- else if (arg & STATUS_INVERT)
-@@ -772,9 +845,10 @@
-
- if (port->started)
- {
-- tr_cfg.tr_en = port->output;
- rec_cfg.rec_en = port->input;
-+ gen_cfg.en = (port->output | port->input);
- }
-+
-
- REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
- REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
-@@ -782,11 +856,24 @@
- REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
- REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg);
-
-+
-+ if (cmd == SSP_FRAME_SYNC &&
-+ (arg & (WORD_SIZE_8 | WORD_SIZE_12 | WORD_SIZE_16 | WORD_SIZE_24 | WORD_SIZE_32))) {
-+ int en = gen_cfg.en;
-+ gen_cfg.en = 0;
-+ REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg);
-+ /* ##### Should DMA be stoped before we change dma size? */
-+ DMA_WR_CMD (port->regi_dmain, dma_w_size);
-+ DMA_WR_CMD (port->regi_dmaout, dma_w_size);
-+ gen_cfg.en = en;
-+ REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg);
-+ }
-+
- spin_unlock_irq(&port->lock);
- return return_val;
- }
-
--static ssize_t sync_serial_write(struct file * file, const char * buf,
-+static ssize_t sync_serial_write(struct file * file, const char * buf,
- size_t count, loff_t *ppos)
- {
- int dev = iminor(file->f_dentry->d_inode);
-@@ -807,7 +894,7 @@
-
- DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
- /* Space to end of buffer */
-- /*
-+ /*
- * out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE
- * outp^ +out_count
- ^free_outp
-@@ -824,7 +911,7 @@
- free_outp = outp + port->out_count;
- spin_unlock_irqrestore(&port->lock, flags);
- out_buffer = (unsigned long)port->out_buffer;
--
-+
- /* Find out where and how much to write */
- if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
- free_outp -= OUT_BUFFER_SIZE;
-@@ -834,7 +921,7 @@
- c = outp - free_outp;
- if (c > count)
- c = count;
--
-+
- // DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c));
- if (copy_from_user((void*)free_outp, buf, c))
- return -EFAULT;
-@@ -854,13 +941,10 @@
- if (!port->started)
- {
- reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg);
-- reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
- reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
- cfg.en = regk_sser_yes;
-- tr_cfg.tr_en = port->output;
- rec_cfg.rec_en = port->input;
- REG_WR(sser, port->regi_sser, rw_cfg, cfg);
-- REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
- REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
- port->started = 1;
- }
-@@ -887,7 +971,7 @@
- }
-
- /* Sleep until all sent */
--
-+
- add_wait_queue(&port->out_wait_q, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- spin_lock_irqsave(&port->lock, flags);
-@@ -916,13 +1000,13 @@
- return count;
- }
-
--static ssize_t sync_serial_read(struct file * file, char * buf,
-+static ssize_t sync_serial_read(struct file * file, char * buf,
- size_t count, loff_t *ppos)
- {
- int dev = iminor(file->f_dentry->d_inode);
- int avail;
- sync_port *port;
-- unsigned char* start;
-+ unsigned char* start;
- unsigned char* end;
- unsigned long flags;
-
-@@ -949,7 +1033,7 @@
- port->started = 1;
- }
-
--
-+
- /* Calculate number of available bytes */
- /* Save pointers to avoid that they are modified by interrupt */
- spin_lock_irqsave(&port->lock, flags);
-@@ -958,11 +1042,12 @@
- spin_unlock_irqrestore(&port->lock, flags);
- while ((start == end) && !port->full) /* No data */
- {
-+ DEBUGREAD(printk("&"));
- if (file->f_flags & O_NONBLOCK)
-- {
-+ {
- return -EAGAIN;
- }
--
-+
- interruptible_sleep_on(&port->in_wait_q);
- if (signal_pending(current))
- {
-@@ -979,9 +1064,9 @@
- avail = port->in_buffer_size;
- else if (end > start)
- avail = end - start;
-- else
-+ else
- avail = port->flip + port->in_buffer_size - start;
--
-+
- count = count > avail ? avail : count;
- if (copy_to_user(buf, start, count))
- return -EFAULT;
-@@ -1016,7 +1101,7 @@
- data |= *port->outp++;
- port->out_count-=2;
- tr_data.data = data;
-- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
-+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
- if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
- port->outp = port->out_buffer;
- }
-@@ -1032,7 +1117,7 @@
- case 24:
- port->out_count-=3;
- tr_data.data = *(unsigned short *)port->outp;
-- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
-+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
- port->outp+=2;
- tr_data.data = *port->outp++;
- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
-@@ -1042,10 +1127,10 @@
- case 32:
- port->out_count-=4;
- tr_data.data = *(unsigned short *)port->outp;
-- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
-+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
- port->outp+=2;
- tr_data.data = *(unsigned short *)port->outp;
-- REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
-+ REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
- port->outp+=2;
- if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
- port->outp = port->out_buffer;
-@@ -1056,15 +1141,27 @@
-
- static void start_dma(struct sync_port* port, const char* data, int count)
- {
-+ int i;
-+ reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
- port->tr_running = 1;
-- port->out_descr.buf = (char*)virt_to_phys((char*)data);
-- port->out_descr.after = port->out_descr.buf + count;
-- port->out_descr.eol = port->out_descr.intr = 1;
-+ for (i = 0; i < NUM_OUT_DESCRS; i++)
-+ {
-+ port->out_descr[i].buf = (char*)virt_to_phys(port->out_buffer + 1024*i);
-+ port->out_descr[i].after = port->out_descr[i].buf + 1024;
-+ port->out_descr[i].eol = 0;
-+ port->out_descr[i].intr = 1;
-+ port->out_descr[i].next = virt_to_phys(&port->out_descr[i+1]);
-+ }
-+ port->out_descr[i-1].next = virt_to_phys(&port->out_descr[0]);
-
-- port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr);
-- port->out_context.saved_data_buf = port->out_descr.buf;
-+ port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr[0]);
-+ port->out_context.saved_data_buf = port->out_descr[0].buf;
-
- DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context));
-+
-+ tr_cfg.tr_en = regk_sser_yes;
-+ REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
-+
- DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count));
- }
-
-@@ -1073,7 +1170,7 @@
- int i;
- char* buf;
- port->writep = port->flip;
--
-+
- if (port->writep > port->flip + port->in_buffer_size)
- {
- panic("Offset too large in sync serial driver\n");
-@@ -1099,7 +1196,7 @@
- }
-
- #ifdef SYNC_SER_DMA
--static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+static irqreturn_t tr_interrupt(int irq, void *dev_id)
- {
- reg_dma_r_masked_intr masked;
- reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes};
-@@ -1108,7 +1205,7 @@
- unsigned int sentl;
- int found = 0;
-
-- for (i = 0; i < NUMBER_OF_PORTS; i++)
-+ for (i = 0; i < NUMBER_OF_PORTS; i++)
- {
- sync_port *port = &ports[i];
- if (!port->enabled || !port->use_dma )
-@@ -1133,18 +1230,21 @@
- if (c > port->out_count)
- c = port->out_count;
- DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c));
-- start_dma(port, port->outp, c);
-+ //start_dma(port, port->outp, c);
- } else {
-- DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl));
-+ reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
-+ DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl));
- port->tr_running = 0;
-+ tr_cfg.tr_en = regk_sser_no;
-+ REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
- }
- wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */
-- }
-+ }
- }
- return IRQ_RETVAL(found);
- } /* tr_interrupt */
-
--static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+static irqreturn_t rx_interrupt(int irq, void *dev_id)
- {
- reg_dma_r_masked_intr masked;
- reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes};
-@@ -1152,7 +1252,7 @@
- int i;
- int found = 0;
-
-- for (i = 0; i < NUMBER_OF_PORTS; i++)
-+ for (i = 0; i < NUMBER_OF_PORTS; i++)
- {
- sync_port *port = &ports[i];
-
-@@ -1164,17 +1264,17 @@
- if (masked.data) /* Descriptor interrupt */
- {
- found = 1;
-- while (REG_RD(dma, port->regi_dmain, rw_data) !=
-+ while (REG_RD(dma, port->regi_dmain, rw_data) !=
- virt_to_phys(port->next_rx_desc)) {
--
-+ DEBUGRXINT(printk("!"));
- if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) {
- int first_size = port->flip + port->in_buffer_size - port->writep;
- memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size);
- memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size);
- port->writep = port->flip + port->inbufchunk - first_size;
- } else {
-- memcpy((char*)port->writep,
-- phys_to_virt((unsigned)port->next_rx_desc->buf),
-+ memcpy((char*)port->writep,
-+ phys_to_virt((unsigned)port->next_rx_desc->buf),
- port->inbufchunk);
- port->writep += port->inbufchunk;
- if (port->writep >= port->flip + port->in_buffer_size)
-@@ -1184,11 +1284,13 @@
- {
- port->full = 1;
- }
--
-- port->next_rx_desc->eol = 0;
-- port->prev_rx_desc->eol = 1;
-- port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc);
-+
-+ port->next_rx_desc->eol = 1;
-+ port->prev_rx_desc->eol = 0;
-+ flush_dma_descr(port->prev_rx_desc,0); // Cache bug workaround
-+ port->prev_rx_desc = port->next_rx_desc;
- port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next);
-+ flush_dma_descr(port->prev_rx_desc,1); // Cache bug workaround
- wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */
- DMA_CONTINUE(port->regi_dmain);
- REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr);
-@@ -1201,7 +1303,7 @@
- #endif /* SYNC_SER_DMA */
-
- #ifdef SYNC_SER_MANUAL
--static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs)
-+static irqreturn_t manual_interrupt(int irq, void *dev_id)
- {
- int i;
- int found = 0;
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/Makefile 2006-12-06 14:17:02.000000000 +0100
-@@ -1,4 +1,4 @@
--# $Id: Makefile,v 1.11 2004/12/17 10:16:13 starvik Exp $
-+# $Id: Makefile,v 1.13 2006/12/06 13:17:02 starvik Exp $
- #
- # Makefile for the linux kernel.
- #
-@@ -8,7 +8,7 @@
-
- obj-y := entry.o traps.o irq.o debugport.o dma.o pinmux.o \
- process.o ptrace.o setup.o signal.o traps.o time.o \
-- arbiter.o io.o
-+ arbiter.o io.o cache.o cacheflush.o
-
- obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
- obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
- obj-$(CONFIG_MODULES) += crisksyms.o
-+obj-$(CONFIG_CPU_FREQ) += cpufreq.o
-
- clean:
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/arbiter.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/arbiter.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/arbiter.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/arbiter.c 2006-10-13 14:43:13.000000000 +0200
-@@ -6,7 +6,7 @@
- * bandwidth (e.g. ethernet) and then the remaining slots are divided
- * on all the active clients.
- *
-- * Copyright (c) 2004, 2005 Axis Communications AB.
-+ * Copyright (c) 2004, 2005, 2006 Axis Communications AB.
- */
-
- #include <asm/arch/hwregs/reg_map.h>
-@@ -44,35 +44,88 @@
- {regi_marb_bp3}
- };
-
--static int requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS];
--static int active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS];
-+static u8 requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS];
-+static u8 active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS];
- static int max_bandwidth[NBR_OF_REGIONS] = {SDRAM_BANDWIDTH, INTMEM_BANDWIDTH};
-
- DEFINE_SPINLOCK(arbiter_lock);
-
--static irqreturn_t
-+static irqreturn_t
- crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs);
-
--static void crisv32_arbiter_config(int region)
-+/*
-+ * "I'm the arbiter, I know the score.
-+ * From square one I'll be watching all 64."
-+ * (memory arbiter slots, that is)
-+ *
-+ * Or in other words:
-+ * Program the memory arbiter slots for "region" according to what's
-+ * in requested_slots[] and active_clients[], while minimizing
-+ * latency. A caller may pass a non-zero positive amount for
-+ * "unused_slots", which must then be the unallocated, remaining
-+ * number of slots, free to hand out to any client.
-+ */
-+
-+static void crisv32_arbiter_config(int region, int unused_slots)
- {
- int slot;
- int client;
- int interval = 0;
-- int val[NBR_OF_SLOTS];
-+
-+ /*
-+ * This vector corresponds to the hardware arbiter slots (see
-+ * the hardware documentation for semantics). We initialize
-+ * each slot with a suitable sentinel value outside the valid
-+ * range {0 .. NBR_OF_CLIENTS - 1} and replace them with
-+ * client indexes. Then it's fed to the hardware.
-+ */
-+ s8 val[NBR_OF_SLOTS];
-
- for (slot = 0; slot < NBR_OF_SLOTS; slot++)
-- val[slot] = NBR_OF_CLIENTS + 1;
-+ val[slot] = -1;
-
- for (client = 0; client < NBR_OF_CLIENTS; client++)
- {
- int pos;
-+ /* Allocate the requested non-zero number of slots, but
-+ * also give clients with zero-requests one slot each
-+ * while stocks last. We do the latter here, in client
-+ * order. This makes sure zero-request clients are the
-+ * first to get to any spare slots, else those slots
-+ * could, when bandwidth is allocated close to the limit,
-+ * all be allocated to low-index non-zero-request clients
-+ * in the default-fill loop below. Another positive but
-+ * secondary effect is a somewhat better spread of the
-+ * zero-bandwidth clients in the vector, avoiding some of
-+ * the latency that could otherwise be caused by the
-+ * partitioning of non-zero-bandwidth clients at low
-+ * indexes and zero-bandwidth clients at high
-+ * indexes. (Note that this spreading can only affect the
-+ * unallocated bandwidth.) All the above only matters for
-+ * memory-intensive situations, of course.
-+ */
- if (!requested_slots[region][client])
-- continue;
-- interval = NBR_OF_SLOTS / requested_slots[region][client];
-+ {
-+ /*
-+ * Skip inactive clients. Also skip zero-slot
-+ * allocations in this pass when there are no known
-+ * free slots.
-+ */
-+ if (!active_clients[region][client] || unused_slots <= 0)
-+ continue;
-+
-+ unused_slots--;
-+
-+ /* Only allocate one slot for this client. */
-+ interval = NBR_OF_SLOTS;
-+ }
-+ else
-+ interval = NBR_OF_SLOTS / requested_slots[region][client];
-+
- pos = 0;
- while (pos < NBR_OF_SLOTS)
- {
-- if (val[pos] != NBR_OF_CLIENTS + 1)
-+ if (val[pos] >= 0)
- pos++;
- else
- {
-@@ -85,7 +138,13 @@
- client = 0;
- for (slot = 0; slot < NBR_OF_SLOTS; slot++)
- {
-- if (val[slot] == NBR_OF_CLIENTS + 1)
-+ /*
-+ * Allocate remaining slots in round-robin
-+ * client-number order for active clients. For this
-+ * pass, we ignore requested bandwidth and previous
-+ * allocations.
-+ */
-+ if (val[slot] < 0)
- {
- int first = client;
- while(!active_clients[region][client]) {
-@@ -100,7 +159,7 @@
- REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot, val[slot]);
- else if (region == INT_REGION)
- REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot, val[slot]);
-- }
-+ }
- }
-
- extern char _stext, _etext;
-@@ -111,18 +170,28 @@
-
- if (initialized)
- return;
--
-+
- initialized = 1;
-
-- /* CPU caches are active. */
-- active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1;
-- crisv32_arbiter_config(EXT_REGION);
-- crisv32_arbiter_config(INT_REGION);
-+ /*
-+ * CPU caches are always set to active, but with zero
-+ * bandwidth allocated. It should be ok to allocate zero
-+ * bandwidth for the caches, because DMA for other channels
-+ * will supposedly finish, once their programmed amount is
-+ * done, and then the caches will get access according to the
-+ * "fixed scheme" for unclaimed slots. Though, if for some
-+ * use-case somewhere, there's a maximum CPU latency for
-+ * e.g. some interrupt, we have to start allocating specific
-+ * bandwidth for the CPU caches too.
-+ */
-+ active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1;
-+ crisv32_arbiter_config(EXT_REGION, 0);
-+ crisv32_arbiter_config(INT_REGION, 0);
-
- if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED,
- "arbiter", NULL))
- printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
--
-+
- #ifndef CONFIG_ETRAX_KGDB
- /* Global watch for writes to kernel text segment. */
- crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext,
-@@ -130,6 +199,7 @@
- #endif
- }
-
-+/* Main entry for bandwidth allocation. */
-
-
- int crisv32_arbiter_allocate_bandwidth(int client, int region,
-@@ -141,39 +211,76 @@
- int req;
-
- crisv32_arbiter_init();
--
-+
- for (i = 0; i < NBR_OF_CLIENTS; i++)
- {
- total_assigned += requested_slots[region][i];
- total_clients += active_clients[region][i];
- }
-- req = NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth);
-
-- if (total_assigned + total_clients + req + 1 > NBR_OF_SLOTS)
-+ /* Avoid division by 0 for 0-bandwidth requests. */
-+ req = bandwidth == 0
-+ ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth);
-+
-+ /*
-+ * We make sure that there are enough slots only for non-zero
-+ * requests. Requesting 0 bandwidth *may* allocate slots,
-+ * though if all bandwidth is allocated, such a client won't
-+ * get any and will have to rely on getting memory access
-+ * according to the fixed scheme that's the default when one
-+ * of the slot-allocated clients doesn't claim their slot.
-+ */
-+ if (total_assigned + req > NBR_OF_SLOTS)
- return -ENOMEM;
-
- active_clients[region][client] = 1;
- requested_slots[region][client] = req;
-- crisv32_arbiter_config(region);
-+ crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned);
-
- return 0;
- }
-
-+/*
-+ * Main entry for bandwidth deallocation.
-+ *
-+ * Strictly speaking, for a somewhat constant set of clients where
-+ * each client gets a constant bandwidth and is just enabled or
-+ * disabled (somewhat dynamically), no action is necessary here to
-+ * avoid starvation for non-zero-allocation clients, as the allocated
-+ * slots will just be unused. However, handing out those unused slots
-+ * to active clients avoids needless latency if the "fixed scheme"
-+ * would give unclaimed slots to an eager low-index client.
-+ */
-+
-+void crisv32_arbiter_deallocate_bandwidth(int client, int region)
-+{
-+ int i;
-+ int total_assigned = 0;
-+
-+ requested_slots[region][client] = 0;
-+ active_clients[region][client] = 0;
-+
-+ for (i = 0; i < NBR_OF_CLIENTS; i++)
-+ total_assigned += requested_slots[region][i];
-+
-+ crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned);
-+}
-+
- int crisv32_arbiter_watch(unsigned long start, unsigned long size,
- unsigned long clients, unsigned long accesses,
- watch_callback* cb)
- {
- int i;
--
-+
- crisv32_arbiter_init();
--
-+
- if (start > 0x80000000) {
- printk("Arbiter: %lX doesn't look like a physical address", start);
- return -EFAULT;
- }
-
- spin_lock(&arbiter_lock);
--
-+
- for (i = 0; i < NUMBER_OF_BP; i++) {
- if (!watches[i].used) {
- reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask);
-@@ -214,7 +321,7 @@
- crisv32_arbiter_init();
-
- spin_lock(&arbiter_lock);
--
-+
- if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) {
- spin_unlock(&arbiter_lock);
- return -EINVAL;
-@@ -239,7 +346,7 @@
-
- extern void show_registers(struct pt_regs *regs);
-
--static irqreturn_t
-+static irqreturn_t
- crisv32_arbiter_irq(int irq, void* dev_id, struct pt_regs* regs)
- {
- reg_marb_r_masked_intr masked_intr = REG_RD(marb, regi_marb, r_masked_intr);
-@@ -248,10 +355,10 @@
- reg_marb_bp_r_brk_op r_op;
- reg_marb_bp_r_brk_first_client r_first;
- reg_marb_bp_r_brk_size r_size;
-- reg_marb_bp_rw_ack ack = {0};
-+ reg_marb_bp_rw_ack ack = {0};
- reg_marb_rw_ack_intr ack_intr = {.bp0=1,.bp1=1,.bp2=1,.bp3=1};
- struct crisv32_watch_entry* watch;
--
-+
- if (masked_intr.bp0) {
- watch = &watches[0];
- ack_intr.bp0 = regk_marb_yes;
-@@ -291,6 +398,6 @@
- if (watch->cb)
- watch->cb();
-
--
-+
- return IRQ_HANDLED;
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/asm-offsets.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/asm-offsets.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/asm-offsets.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/asm-offsets.c 2003-06-02 10:39:38.000000000 +0200
-@@ -16,8 +16,8 @@
- {
- #define ENTRY(entry) DEFINE(PT_ ## entry, offsetof(struct pt_regs, entry))
- ENTRY(orig_r10);
-- ENTRY(r13);
-- ENTRY(r12);
-+ ENTRY(r13);
-+ ENTRY(r12);
- ENTRY(r11);
- ENTRY(r10);
- ENTRY(r9);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cache.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cache.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cache.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cache.c 2007-01-23 13:09:57.000000000 +0100
-@@ -0,0 +1,31 @@
-+#include <linux/module.h>
-+#include <asm/io.h>
-+#include <asm/arch/cache.h>
-+#include <asm/arch/hwregs/dma.h>
-+
-+// This file is used to workaround a cache bug, Guinness TR 106
-+
-+inline void flush_dma_descr(dma_descr_data* descr, int flush_buf)
-+{
-+ // Flush descriptor to make sure we get correct in_eop and after
-+ asm volatile ("ftagd [%0]" :: "r" (descr));
-+ // Flush buffer pointed out by descriptor
-+ if (flush_buf)
-+ cris_flush_cache_range(phys_to_virt((unsigned)descr->buf), (unsigned)(descr->after - descr->buf));
-+}
-+
-+void flush_dma_list(dma_descr_data* descr)
-+{
-+ while(1)
-+ {
-+ flush_dma_descr(descr, 1);
-+ if (descr->eol)
-+ break;
-+ descr = phys_to_virt((unsigned)descr->next);
-+ }
-+}
-+
-+EXPORT_SYMBOL(flush_dma_list);
-+EXPORT_SYMBOL(flush_dma_descr);
-+EXPORT_SYMBOL(cris_flush_cache);
-+EXPORT_SYMBOL(cris_flush_cache_range);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cacheflush.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cacheflush.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cacheflush.S 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cacheflush.S 2006-12-06 14:17:02.000000000 +0100
-@@ -0,0 +1,93 @@
-+ .global cris_flush_cache_range
-+cris_flush_cache_range:
-+ move.d 1024, $r12
-+ cmp.d $r11, $r12
-+ bhi cris_flush_1KB
-+ nop
-+ add.d $r10, $r11
-+cris_flush_last:
-+ addq 32, $r10
-+ cmp.d $r11, $r10
-+ blt cris_flush_last
-+ ftagd [$r10]
-+ ret
-+ nop
-+cris_flush_1KB:
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ftagd [$r10]
-+ addq 32, $r10
-+ ba cris_flush_cache_range
-+ sub.d $r12, $r11
-+
-+ .global cris_flush_cache
-+cris_flush_cache:
-+ moveq 0, $r10
-+cris_flush_line:
-+ move.d 16*1024, $r11
-+ addq 16, $r10
-+ cmp.d $r10, $r11
-+ blt cris_flush_line
-+ fidxd [$r10]
-+ ret
-+ nop
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cpufreq.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cpufreq.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/cpufreq.c 2006-11-03 11:35:52.000000000 +0100
-@@ -0,0 +1,147 @@
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/cpufreq.h>
-+#include <asm/arch/hwregs/reg_map.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/config_defs.h>
-+#include <asm/arch/hwregs/bif_core_defs.h>
-+
-+static int
-+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, void *data);
-+
-+static struct notifier_block cris_sdram_freq_notifier_block = {
-+ .notifier_call = cris_sdram_freq_notifier
-+};
-+
-+static struct cpufreq_frequency_table cris_freq_table[] = {
-+ {0x01, 6000},
-+ {0x02, 200000},
-+ {0, CPUFREQ_TABLE_END},
-+};
-+
-+static unsigned int cris_freq_get_cpu_frequency(unsigned int cpu)
-+{
-+ reg_config_rw_clk_ctrl clk_ctrl;
-+ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
-+ return clk_ctrl.pll ? 200000 : 6000;
-+}
-+
-+static void cris_freq_set_cpu_state (unsigned int state)
-+{
-+ int i;
-+ struct cpufreq_freqs freqs;
-+ reg_config_rw_clk_ctrl clk_ctrl;
-+ clk_ctrl = REG_RD(config, regi_config, rw_clk_ctrl);
-+
-+ for_each_cpu(i) {
-+ freqs.old = cris_freq_get_cpu_frequency(i);
-+ freqs.new = cris_freq_table[state].frequency;
-+ freqs.cpu = i;
-+ }
-+
-+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-+
-+ local_irq_disable();
-+
-+ // Even though we may be SMP they will share the same clock
-+ // so all settings are made on CPU0.
-+ if (cris_freq_table[state].frequency == 200000)
-+ clk_ctrl.pll = 1;
-+ else
-+ clk_ctrl.pll = 0;
-+ REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl);
-+
-+ local_irq_enable();
-+
-+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-+};
-+
-+static int cris_freq_verify (struct cpufreq_policy *policy)
-+{
-+ return cpufreq_frequency_table_verify(policy, &cris_freq_table[0]);
-+}
-+
-+static int cris_freq_target (struct cpufreq_policy *policy,
-+ unsigned int target_freq,
-+ unsigned int relation)
-+{
-+ unsigned int newstate = 0;
-+
-+ if (cpufreq_frequency_table_target(policy, cris_freq_table, target_freq, relation, &newstate))
-+ return -EINVAL;
-+
-+ cris_freq_set_cpu_state(newstate);
-+
-+ return 0;
-+}
-+
-+static int cris_freq_cpu_init(struct cpufreq_policy *policy)
-+{
-+ int result;
-+
-+ /* cpuinfo and default policy values */
-+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-+ policy->cpuinfo.transition_latency = 1000000; /* 1ms */
-+ policy->cur = cris_freq_get_cpu_frequency(0);
-+
-+ result = cpufreq_frequency_table_cpuinfo(policy, cris_freq_table);
-+ if (result)
-+ return (result);
-+
-+ cpufreq_frequency_table_get_attr(cris_freq_table, policy->cpu);
-+
-+ return 0;
-+}
-+
-+
-+static int cris_freq_cpu_exit(struct cpufreq_policy *policy)
-+{
-+ cpufreq_frequency_table_put_attr(policy->cpu);
-+ return 0;
-+}
-+
-+
-+static struct freq_attr* cris_freq_attr[] = {
-+ &cpufreq_freq_attr_scaling_available_freqs,
-+ NULL,
-+};
-+
-+static struct cpufreq_driver cris_freq_driver = {
-+ .get = cris_freq_get_cpu_frequency,
-+ .verify = cris_freq_verify,
-+ .target = cris_freq_target,
-+ .init = cris_freq_cpu_init,
-+ .exit = cris_freq_cpu_exit,
-+ .name = "cris_freq",
-+ .owner = THIS_MODULE,
-+ .attr = cris_freq_attr,
-+};
-+
-+static int __init cris_freq_init(void)
-+{
-+ int ret;
-+ ret = cpufreq_register_driver(&cris_freq_driver);
-+ cpufreq_register_notifier(&cris_sdram_freq_notifier_block,
-+ CPUFREQ_TRANSITION_NOTIFIER);
-+ return ret;
-+}
-+
-+static int
-+cris_sdram_freq_notifier(struct notifier_block *nb, unsigned long val, void *data)
-+{
-+ int i;
-+ struct cpufreq_freqs *freqs = data;
-+ if (val == CPUFREQ_PRECHANGE) {
-+ reg_bif_core_rw_sdram_timing timing =
-+ REG_RD(bif_core, regi_bif_core, rw_sdram_timing);
-+ timing.cpd = (freqs->new == 200000 ? 0 : 1);
-+
-+ if (freqs->new == 200000)
-+ for (i = 0; i < 50000; i++);
-+ REG_WR(bif_core, regi_bif_core, rw_sdram_timing, timing);
-+ }
-+ return 0;
-+}
-+
-+
-+module_init(cris_freq_init);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/crisksyms.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/crisksyms.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/crisksyms.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/crisksyms.c 2006-11-21 04:21:34.000000000 +0100
-@@ -3,6 +3,7 @@
- #include <asm/arch/dma.h>
- #include <asm/arch/intmem.h>
- #include <asm/arch/pinmux.h>
-+#include <asm/arch/io.h>
-
- /* Functions for allocating DMA channels */
- EXPORT_SYMBOL(crisv32_request_dma);
-@@ -16,7 +17,11 @@
-
- /* Functions for handling pinmux */
- EXPORT_SYMBOL(crisv32_pinmux_alloc);
-+EXPORT_SYMBOL(crisv32_pinmux_alloc_fixed);
- EXPORT_SYMBOL(crisv32_pinmux_dealloc);
-+EXPORT_SYMBOL(crisv32_pinmux_dealloc_fixed);
-+EXPORT_SYMBOL(crisv32_io_get_name);
-+EXPORT_SYMBOL(crisv32_io_get);
-
- /* Functions masking/unmasking interrupts */
- EXPORT_SYMBOL(mask_irq);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/debugport.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/debugport.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/debugport.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/debugport.c 2006-10-13 14:43:13.000000000 +0200
-@@ -4,18 +4,13 @@
-
- #include <linux/console.h>
- #include <linux/init.h>
--#include <linux/major.h>
--#include <linux/delay.h>
--#include <linux/tty.h>
- #include <asm/system.h>
--#include <asm/io.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/reg_map.h>
- #include <asm/arch/hwregs/ser_defs.h>
- #include <asm/arch/hwregs/dma_defs.h>
- #include <asm/arch/pinmux.h>
-
--#include <asm/irq.h>
--#include <asm/arch/hwregs/intr_vect_defs.h>
--
- struct dbg_port
- {
- unsigned char nbr;
-@@ -26,7 +21,7 @@
- unsigned int bits;
- };
-
--struct dbg_port ports[] =
-+struct dbg_port ports[] =
- {
- {
- 0,
-@@ -89,15 +84,6 @@
- #endif
- #endif
-
--#ifdef CONFIG_ETRAXFS_SIM
--extern void print_str( const char *str );
--static char buffer[1024];
--static char msg[] = "Debug: ";
--static int buffer_pos = sizeof(msg) - 1;
--#endif
--
--extern struct tty_driver *serial_driver;
--
- static void
- start_port(struct dbg_port* p)
- {
-@@ -118,7 +104,7 @@
- /* Set up serial port registers */
- reg_ser_rw_tr_ctrl tr_ctrl = {0};
- reg_ser_rw_tr_dma_en tr_dma_en = {0};
--
-+
- reg_ser_rw_rec_ctrl rec_ctrl = {0};
- reg_ser_rw_tr_baud_div tr_baud_div = {0};
- reg_ser_rw_rec_baud_div rec_baud_div = {0};
-@@ -148,6 +134,7 @@
- tr_ctrl.data_bits = regk_ser_bits7;
- rec_ctrl.data_bits = regk_ser_bits7;
- }
-+
-
- REG_WR (ser, p->instance, rw_tr_baud_div, tr_baud_div);
- REG_WR (ser, p->instance, rw_rec_baud_div, rec_baud_div);
-@@ -156,124 +143,21 @@
- REG_WR (ser, p->instance, rw_rec_ctrl, rec_ctrl);
- }
-
--/* No debug */
--#ifdef CONFIG_ETRAX_DEBUG_PORT_NULL
--
--static void
--console_write(struct console *co, const char *buf, unsigned int len)
--{
-- return;
--}
--
--/* Target debug */
--#elif !defined(CONFIG_ETRAXFS_SIM)
--
--static void
--console_write_direct(struct console *co, const char *buf, unsigned int len)
--{
-- int i;
-- reg_ser_r_stat_din stat;
-- reg_ser_rw_tr_dma_en tr_dma_en, old;
--
-- /* Switch to manual mode */
-- tr_dma_en = old = REG_RD (ser, port->instance, rw_tr_dma_en);
-- if (tr_dma_en.en == regk_ser_yes) {
-- tr_dma_en.en = regk_ser_no;
-- REG_WR(ser, port->instance, rw_tr_dma_en, tr_dma_en);
-- }
--
-- /* Send data */
-- for (i = 0; i < len; i++) {
-- /* LF -> CRLF */
-- if (buf[i] == '\n') {
-- do {
-- stat = REG_RD (ser, port->instance, r_stat_din);
-- } while (!stat.tr_rdy);
-- REG_WR_INT (ser, port->instance, rw_dout, '\r');
-- }
-- /* Wait until transmitter is ready and send.*/
-- do {
-- stat = REG_RD (ser, port->instance, r_stat_din);
-- } while (!stat.tr_rdy);
-- REG_WR_INT (ser, port->instance, rw_dout, buf[i]);
-- }
--
-- /* Restore mode */
-- if (tr_dma_en.en != old.en)
-- REG_WR(ser, port->instance, rw_tr_dma_en, old);
--}
--
--static void
--console_write(struct console *co, const char *buf, unsigned int len)
--{
-- if (!port)
-- return;
-- console_write_direct(co, buf, len);
--}
--
--
--
--#else
--
--/* VCS debug */
--
--static void
--console_write(struct console *co, const char *buf, unsigned int len)
--{
-- char* pos;
-- pos = memchr(buf, '\n', len);
-- if (pos) {
-- int l = ++pos - buf;
-- memcpy(buffer + buffer_pos, buf, l);
-- memcpy(buffer, msg, sizeof(msg) - 1);
-- buffer[buffer_pos + l] = '\0';
-- print_str(buffer);
-- buffer_pos = sizeof(msg) - 1;
-- if (pos - buf != len) {
-- memcpy(buffer + buffer_pos, pos, len - l);
-- buffer_pos += len - l;
-- }
-- } else {
-- memcpy(buffer + buffer_pos, buf, len);
-- buffer_pos += len;
-- }
--}
--
--#endif
--
--int raw_printk(const char *fmt, ...)
--{
-- static char buf[1024];
-- int printed_len;
-- va_list args;
-- va_start(args, fmt);
-- printed_len = vsnprintf(buf, sizeof(buf), fmt, args);
-- va_end(args);
-- console_write(NULL, buf, strlen(buf));
-- return printed_len;
--}
--
--void
--stupid_debug(char* buf)
--{
-- console_write(NULL, buf, strlen(buf));
--}
--
- #ifdef CONFIG_ETRAX_KGDB
- /* Use polling to get a single character from the kernel debug port */
- int
- getDebugChar(void)
- {
-- reg_ser_rs_status_data stat;
-+ reg_ser_rs_stat_din stat;
- reg_ser_rw_ack_intr ack_intr = { 0 };
-
- do {
-- stat = REG_RD(ser, kgdb_instance, rs_status_data);
-- } while (!stat.data_avail);
-+ stat = REG_RD(ser, kgdb_port->instance, rs_stat_din);
-+ } while (!stat.dav);
-
- /* Ack the data_avail interrupt. */
-- ack_intr.data_avail = 1;
-- REG_WR(ser, kgdb_instance, rw_ack_intr, ack_intr);
-+ ack_intr.dav = 1;
-+ REG_WR(ser, kgdb_port->instance, rw_ack_intr, ack_intr);
-
- return stat.data;
- }
-@@ -282,173 +166,18 @@
- void
- putDebugChar(int val)
- {
-- reg_ser_r_status_data stat;
-+ reg_ser_r_stat_din stat;
- do {
-- stat = REG_RD (ser, kgdb_instance, r_status_data);
-- } while (!stat.tr_ready);
-- REG_WR (ser, kgdb_instance, rw_data_out, REG_TYPE_CONV(reg_ser_rw_data_out, int, val));
-+ stat = REG_RD (ser, kgdb_port->instance, r_stat_din);
-+ } while (!stat.tr_rdy);
-+ REG_WR_INT (ser, kgdb_port->instance, rw_dout, val);
- }
- #endif /* CONFIG_ETRAX_KGDB */
-
--static int __init
--console_setup(struct console *co, char *options)
--{
-- char* s;
--
-- if (options) {
-- port = &ports[co->index];
-- port->baudrate = 115200;
-- port->parity = 'N';
-- port->bits = 8;
-- port->baudrate = simple_strtoul(options, NULL, 10);
-- s = options;
-- while(*s >= '0' && *s <= '9')
-- s++;
-- if (*s) port->parity = *s++;
-- if (*s) port->bits = *s++ - '0';
-- port->started = 0;
-- start_port(port);
-- }
-- return 0;
--}
--
--/* This is a dummy serial device that throws away anything written to it.
-- * This is used when no debug output is wanted.
-- */
--static struct tty_driver dummy_driver;
--
--static int dummy_open(struct tty_struct *tty, struct file * filp)
--{
-- return 0;
--}
--
--static void dummy_close(struct tty_struct *tty, struct file * filp)
--{
--}
--
--static int dummy_write(struct tty_struct * tty,
-- const unsigned char *buf, int count)
--{
-- return count;
--}
--
--static int
--dummy_write_room(struct tty_struct *tty)
--{
-- return 8192;
--}
--
--void __init
--init_dummy_console(void)
--{
-- memset(&dummy_driver, 0, sizeof(struct tty_driver));
-- dummy_driver.driver_name = "serial";
-- dummy_driver.name = "ttyS";
-- dummy_driver.major = TTY_MAJOR;
-- dummy_driver.minor_start = 68;
-- dummy_driver.num = 1; /* etrax100 has 4 serial ports */
-- dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
-- dummy_driver.subtype = SERIAL_TYPE_NORMAL;
-- dummy_driver.init_termios = tty_std_termios;
-- dummy_driver.init_termios.c_cflag =
-- B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
-- dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
--
-- dummy_driver.open = dummy_open;
-- dummy_driver.close = dummy_close;
-- dummy_driver.write = dummy_write;
-- dummy_driver.write_room = dummy_write_room;
-- if (tty_register_driver(&dummy_driver))
-- panic("Couldn't register dummy serial driver\n");
--}
--
--static struct tty_driver*
--crisv32_console_device(struct console* co, int *index)
--{
-- if (port)
-- *index = port->nbr;
-- return port ? serial_driver : &dummy_driver;
--}
--
--static struct console sercons = {
-- name : "ttyS",
-- write: console_write,
-- read : NULL,
-- device : crisv32_console_device,
-- unblank : NULL,
-- setup : console_setup,
-- flags : CON_PRINTBUFFER,
-- index : -1,
-- cflag : 0,
-- next : NULL
--};
--static struct console sercons0 = {
-- name : "ttyS",
-- write: console_write,
-- read : NULL,
-- device : crisv32_console_device,
-- unblank : NULL,
-- setup : console_setup,
-- flags : CON_PRINTBUFFER,
-- index : 0,
-- cflag : 0,
-- next : NULL
--};
--
--static struct console sercons1 = {
-- name : "ttyS",
-- write: console_write,
-- read : NULL,
-- device : crisv32_console_device,
-- unblank : NULL,
-- setup : console_setup,
-- flags : CON_PRINTBUFFER,
-- index : 1,
-- cflag : 0,
-- next : NULL
--};
--static struct console sercons2 = {
-- name : "ttyS",
-- write: console_write,
-- read : NULL,
-- device : crisv32_console_device,
-- unblank : NULL,
-- setup : console_setup,
-- flags : CON_PRINTBUFFER,
-- index : 2,
-- cflag : 0,
-- next : NULL
--};
--static struct console sercons3 = {
-- name : "ttyS",
-- write: console_write,
-- read : NULL,
-- device : crisv32_console_device,
-- unblank : NULL,
-- setup : console_setup,
-- flags : CON_PRINTBUFFER,
-- index : 3,
-- cflag : 0,
-- next : NULL
--};
--
- /* Register console for printk's, etc. */
- int __init
- init_etrax_debug(void)
- {
-- static int first = 1;
--
-- if (!first) {
-- unregister_console(&sercons);
-- register_console(&sercons0);
-- register_console(&sercons1);
-- register_console(&sercons2);
-- register_console(&sercons3);
-- init_dummy_console();
-- return 0;
-- }
-- first = 0;
-- register_console(&sercons);
- start_port(port);
-
- #ifdef CONFIG_ETRAX_KGDB
-@@ -456,5 +185,3 @@
- #endif /* CONFIG_ETRAX_KGDB */
- return 0;
- }
--
--__initcall(init_etrax_debug);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/dma.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/dma.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/dma.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/dma.c 2007-02-02 08:45:22.000000000 +0100
-@@ -12,6 +12,16 @@
- #include <asm/system.h>
- #include <asm/arch/arbiter.h>
-
-+/*
-+ * The memory region we allocated bandwidth for is stored in
-+ * used_dma_channels as an in-use flag.
-+ */
-+enum dma_region_allocated_marker {
-+ DMA_NO_REGION_ALLOCATED = 0,
-+ DMA_INT_REGION_ALLOCATED = 1,
-+ DMA_EXT_REGION_ALLOCATED = 2
-+};
-+
- static char used_dma_channels[MAX_DMA_CHANNELS];
- static const char * used_dma_channels_users[MAX_DMA_CHANNELS];
-
-@@ -74,7 +84,7 @@
- if (options & DMA_VERBOSE_ON_ERROR) {
- printk("Failed to request DMA %i for %s, only 0-%i valid)\n", dmanr, device_id, MAX_DMA_CHANNELS-1);
- }
--
-+
- if (options & DMA_PANIC_ON_ERROR)
- panic("request_dma error!");
- return -EINVAL;
-@@ -202,13 +212,14 @@
- if (dmanr == 3)
- strmux_cfg.dma3 = regk_strmux_ext3;
- else if (dmanr == 9)
-- strmux_cfg.dma9 = regk_strmux_ext2;
-+ strmux_cfg.dma9 = regk_strmux_ext3;
- else
-- panic("Invalid DMA channel for ext2\n");
-+ panic("Invalid DMA channel for ext3\n");
- break;
- }
-
-- used_dma_channels[dmanr] = 1;
-+ used_dma_channels[dmanr] = options & DMA_INT_MEM
-+ ? DMA_INT_REGION_ALLOCATED : DMA_EXT_REGION_ALLOCATED;
- used_dma_channels_users[dmanr] = device_id;
- REG_WR(config, regi_config, rw_clk_ctrl, clk_ctrl);
- REG_WR(strmux, regi_strmux, rw_cfg, strmux_cfg);
-@@ -218,7 +229,12 @@
-
- void crisv32_free_dma(unsigned int dmanr)
- {
-+ int region;
-+
- spin_lock(&dma_lock);
-+ region = used_dma_channels[dmanr] == DMA_INT_REGION_ALLOCATED
-+ ? INT_REGION : EXT_REGION;
- used_dma_channels[dmanr] = 0;
-+ crisv32_arbiter_deallocate_bandwidth(dmanr, region);
- spin_unlock(&dma_lock);
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/entry.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/entry.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/entry.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/entry.S 2007-01-09 10:29:19.000000000 +0100
-@@ -11,7 +11,7 @@
- *
- * Stack layout in 'ret_from_system_call':
- * ptrace needs to have all regs on the stack.
-- * if the order here is changed, it needs to be
-+ * if the order here is changed, it needs to be
- * updated in fork.c:copy_process, signal.c:do_signal,
- * ptrace.c and ptrace.h
- *
-@@ -40,7 +40,7 @@
- .globl sys_call_table
-
- ; Check if preemptive kernel scheduling should be done.
--#ifdef CONFIG_PREEMPT
-+#ifdef CONFIG_PREEMPT
- _resume_kernel:
- di
- ; Load current task struct.
-@@ -81,7 +81,7 @@
- nop
- ba ret_from_sys_call
- nop
--
-+
- ret_from_intr:
- ;; Check for resched if preemptive kernel, or if we're going back to
- ;; user-mode. This test matches the user_regs(regs) macro. Don't simply
-@@ -93,7 +93,7 @@
- bpl _resume_kernel
-
- ; Note that di below is in delay slot.
--
-+
- _resume_userspace:
- di ; So need_resched and sigpending don't change.
-
-@@ -107,19 +107,19 @@
- nop
- ba _Rexit
- nop
--
-+
- ;; The system_call is called by a BREAK instruction, which looks pretty
- ;; much like any other exception.
- ;;
- ;; System calls can't be made from interrupts but we still stack ERP
- ;; to have a complete stack frame.
-- ;;
-+ ;;
- ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,
- ;; r13,mof,srp
- ;;
- ;; This function looks on the _surface_ like spaghetti programming, but it's
-- ;; really designed so that the fast-path does not force cache-loading of
-- ;; non-used instructions. Only the non-common cases cause the outlined code
-+ ;; really designed so that the fast-path does not force cache-loading of
-+ ;; non-used instructions. Only the non-common cases cause the outlined code
- ;; to run..
-
- system_call:
-@@ -151,7 +151,7 @@
- or.d (1<<9), $r0
- move $r0, $ccs
- #endif
--
-+
- movs.w -ENOSYS, $r0
- addoq +PT_r10, $sp, $acr
- move.d $r0, [$acr]
-@@ -166,9 +166,9 @@
- bmi _syscall_trace_entry
- nop
-
--_syscall_traced:
-+_syscall_traced:
- ;; Check for sanity in the requested syscall number.
-- cmpu.w NR_syscalls, $r9
-+ cmpu.w NR_syscalls, $r9
- bhs ret_from_sys_call
- lslq 2, $r9 ; Multiply by 4, in the delay slot.
-
-@@ -177,7 +177,7 @@
- move.d $sp, $r0
- subq 4, $sp
- move.d $r0, [$sp]
--
-+
- ;; The registers carrying parameters (R10-R13) are intact. The optional
- ;; fifth and sixth parameters is in MOF and SRP respectivly. Put them
- ;; back on the stack.
-@@ -185,33 +185,33 @@
- move $srp, [$sp]
- subq 4, $sp
- move $mof, [$sp]
--
-+
- ;; Actually to the system call.
- addo.d +sys_call_table, $r9, $acr
- move.d [$acr], $acr
- jsr $acr
- nop
--
-+
- addq 3*4, $sp ; Pop the mof, srp and regs parameters.
- addoq +PT_r10, $sp, $acr
- move.d $r10, [$acr] ; Save the return value.
-
-- moveq 1, $r9 ; "Parameter" to ret_from_sys_call to
-+ moveq 1, $r9 ; "Parameter" to ret_from_sys_call to
- ; show it was a sys call.
--
-+
- ;; Fall through into ret_from_sys_call to return.
--
-+
- ret_from_sys_call:
- ;; R9 is a parameter:
- ;; >= 1 from syscall
- ;; 0 from irq
--
-+
- ;; Get the current task-struct pointer.
-- movs.w -8192, $r0 ; THREAD_SIZE == 8192
-+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
- and.d $sp, $r0
-
- di ; Make sure need_resched and sigpending don't change.
--
-+
- addoq +TI_flags, $r0, $acr
- move.d [$acr], $r1
- and.d _TIF_ALLWORK_MASK, $r1
-@@ -253,14 +253,14 @@
- move.d $r1, $r9
- ba _resume_userspace
- nop
--
-+
- _work_pending:
- addoq +TI_flags, $r0, $acr
- move.d [$acr], $r10
- btstq TIF_NEED_RESCHED, $r10 ; Need resched?
- bpl _work_notifysig ; No, must be signal/notify.
- nop
--
-+
- _work_resched:
- move.d $r9, $r1 ; Preserve R9.
- jsr schedule
-@@ -281,28 +281,26 @@
- ;; Deal with pending signals and notify-resume requests.
-
- addoq +TI_flags, $r0, $acr
-- move.d [$acr], $r13 ; The thread_info_flags parameter.
-- move.d $r9, $r10 ; do_notify_resume syscall/irq param.
-- moveq 0, $r11 ; oldset param - 0 in this case.
-- move.d $sp, $r12 ; The regs param.
-+ move.d [$acr], $r12 ; The thread_info_flags parameter.
-+ move.d $sp, $r11 ; The regs param.
- jsr do_notify_resume
-- nop
--
-+ move.d $r9, $r10 ; do_notify_resume syscall/irq param.
-+
- ba _Rexit
- nop
-
- ;; We get here as a sidetrack when we've entered a syscall with the
- ;; trace-bit set. We need to call do_syscall_trace and then continue
- ;; with the call.
--
-+
- _syscall_trace_entry:
- ;; PT_r10 in the frame contains -ENOSYS as required, at this point.
--
-+
- jsr do_syscall_trace
- nop
-
- ;; Now re-enter the syscall code to do the syscall itself. We need to
-- ;; restore R9 here to contain the wanted syscall, and the other
-+ ;; restore R9 here to contain the wanted syscall, and the other
- ;; parameter-bearing registers.
- addoq +PT_r9, $sp, $acr
- move.d [$acr], $r9
-@@ -318,10 +316,10 @@
- move [$acr], $mof
- addoq +PT_srp, $sp, $acr
- move [$acr], $srp
--
-+
- ba _syscall_traced
- nop
--
-+
- ;; Resume performs the actual task-switching, by switching stack
- ;; pointers. Input arguments are:
- ;;
-@@ -331,7 +329,7 @@
- ;;
- ;; Returns old current in R10.
-
--resume:
-+resume:
- subq 4, $sp
- move $srp, [$sp] ; Keep old/new PC on the stack.
- add.d $r12, $r10 ; R10 = current tasks tss.
-@@ -341,14 +339,14 @@
-
- addoq +THREAD_usp, $r10, $acr
- move $usp, [$acr] ; Save user-mode stackpointer.
--
-+
- ;; See copy_thread for the reason why register R9 is saved.
- subq 10*4, $sp
- movem $r9, [$sp] ; Save non-scratch registers and R9.
--
-+
- addoq +THREAD_ksp, $r10, $acr
- move.d $sp, [$acr] ; Save kernel SP for old task.
--
-+
- move.d $sp, $r10 ; Return last running task in R10.
- and.d -8192, $r10 ; Get thread_info from stackpointer.
- addoq +TI_task, $r10, $acr
-@@ -360,7 +358,7 @@
-
- addoq +THREAD_usp, $r11, $acr
- move [$acr], $usp ; Restore user-mode stackpointer.
--
-+
- addoq +THREAD_ccs, $r11, $acr
- move [$acr], $ccs ; Restore IRQ enable status.
- move.d [$sp+], $acr
-@@ -407,7 +405,7 @@
- movem [$sp+], $r13
- move.d [$sp+], $acr
- move [$sp], $srs
-- addq 4, $sp
-+ addq 4, $sp
- move [$sp+], $mof
- move [$sp+], $spc
- move [$sp+], $ccs
-@@ -419,7 +417,7 @@
-
- .comm cause_of_death, 4 ;; Don't declare this anywhere.
-
--spurious_interrupt:
-+spurious_interrupt:
- di
- jump hard_reset_now
- nop
-@@ -494,31 +492,38 @@
- ;; thread_info as first parameter
- move.d $r9, $r10
- moveq 5, $r11 ; SIGTRAP as second argument.
-- jsr ugdb_trap_user
-+ jsr ugdb_trap_user
- nop
- jump ret_from_intr ; Use the return routine for interrupts.
- nop
--
--gdb_handle_exception:
-+
-+gdb_handle_exception:
- subq 4, $sp
- move.d $r0, [$sp]
- #ifdef CONFIG_ETRAX_KGDB
-- move $ccs, $r0 ; U-flag not affected by previous insns.
-+ move $ccs, $r0 ; U-flag not affected by previous insns.
- btstq 16, $r0 ; Test the U-flag.
-- bmi _ugdb_handle_exception ; Go to user mode debugging.
-- nop ; Empty delay-slot (cannot pop R0 here).
-+ bmi _ugdb_handle_exception ; Go to user mode debugging.
-+ nop ; Empty delay-slot (cannot pop R0 here).
- ba kgdb_handle_exception ; Go to kernel debugging.
- move.d [$sp+], $r0 ; Restore R0 in delay slot.
- #endif
--
-+
- _ugdb_handle_exception:
- ba do_sigtrap ; SIGTRAP the offending process.
- move.d [$sp+], $r0 ; Restore R0 in delay slot.
-
-+ .global kernel_execve
-+kernel_execve:
-+ move.d __NR_execve, $r9
-+ break 13
-+ ret
-+ nop
-+
- .data
-
- .section .rodata,"a"
--sys_call_table:
-+sys_call_table:
- .long sys_restart_syscall ; 0 - old "setup()" system call, used
- ; for restarting.
- .long sys_exit
-@@ -647,7 +652,7 @@
- .long sys_adjtimex
- .long sys_mprotect /* 125 */
- .long sys_sigprocmask
-- .long sys_ni_syscall /* old "create_module" */
-+ .long sys_ni_syscall /* old "create_module" */
- .long sys_init_module
- .long sys_delete_module
- .long sys_ni_syscall /* 130: old "get_kernel_syms" */
-@@ -789,7 +794,7 @@
- .long sys_clock_getres
- .long sys_clock_nanosleep
- .long sys_statfs64
-- .long sys_fstatfs64
-+ .long sys_fstatfs64
- .long sys_tgkill /* 270 */
- .long sys_utimes
- .long sys_fadvise64_64
-@@ -805,7 +810,43 @@
- .long sys_mq_getsetattr
- .long sys_ni_syscall /* reserved for kexec */
- .long sys_waitid
--
-+ .long sys_ni_syscall /* 285 */ /* available */
-+ .long sys_add_key
-+ .long sys_request_key
-+ .long sys_keyctl
-+ .long sys_ioprio_set
-+ .long sys_ioprio_get /* 290 */
-+ .long sys_inotify_init
-+ .long sys_inotify_add_watch
-+ .long sys_inotify_rm_watch
-+ .long sys_migrate_pages
-+ .long sys_openat /* 295 */
-+ .long sys_mkdirat
-+ .long sys_mknodat
-+ .long sys_fchownat
-+ .long sys_futimesat
-+ .long sys_fstatat64 /* 300 */
-+ .long sys_unlinkat
-+ .long sys_renameat
-+ .long sys_linkat
-+ .long sys_symlinkat
-+ .long sys_readlinkat /* 305 */
-+ .long sys_fchmodat
-+ .long sys_faccessat
-+ .long sys_pselect6
-+ .long sys_ppoll
-+ .long sys_unshare /* 310 */
-+ .long sys_set_robust_list
-+ .long sys_set_robust_list
-+ .long sys_get_robust_list
-+ .long sys_splice
-+ .long sys_sync_file_range
-+ .long sys_tee /* 315 */
-+ .long sys_vmsplice
-+ .long sys_move_pages
-+ .long sys_getcpu
-+ .long sys_epoll_pwait
-+
- /*
- * NOTE!! This doesn't have to be exact - we just have
- * to make sure we have _enough_ of the "sys_ni_syscall"
-@@ -816,4 +857,4 @@
- .rept NR_syscalls - (.-sys_call_table) / 4
- .long sys_ni_syscall
- .endr
--
-+
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/fasttimer.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/fasttimer.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/fasttimer.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/fasttimer.c 2007-01-09 10:29:19.000000000 +0100
-@@ -1,110 +1,10 @@
--/* $Id: fasttimer.c,v 1.11 2005/01/04 11:15:46 starvik Exp $
-+/*
- * linux/arch/cris/kernel/fasttimer.c
- *
- * Fast timers for ETRAX FS
- * This may be useful in other OS than Linux so use 2 space indentation...
- *
-- * $Log: fasttimer.c,v $
-- * Revision 1.11 2005/01/04 11:15:46 starvik
-- * Don't share timer IRQ.
-- *
-- * Revision 1.10 2004/12/07 09:19:38 starvik
-- * Corrected includes.
-- * Use correct interrupt macros.
-- *
-- * Revision 1.9 2004/05/14 10:18:58 starvik
-- * Export fast_timer_list
-- *
-- * Revision 1.8 2004/05/14 07:58:03 starvik
-- * Merge of changes from 2.4
-- *
-- * Revision 1.7 2003/07/10 12:06:14 starvik
-- * Return IRQ_NONE if irq wasn't handled
-- *
-- * Revision 1.6 2003/07/04 08:27:49 starvik
-- * Merge of Linux 2.5.74
-- *
-- * Revision 1.5 2003/06/05 10:16:22 johana
-- * New INTR_VECT macros.
-- *
-- * Revision 1.4 2003/06/03 08:49:45 johana
-- * Fixed typo.
-- *
-- * Revision 1.3 2003/06/02 12:51:27 johana
-- * Now compiles.
-- * Commented some include files that probably can be removed.
-- *
-- * Revision 1.2 2003/06/02 12:09:41 johana
-- * Ported to ETRAX FS using the trig interrupt instead of timer1.
-- *
-- * Revision 1.3 2002/12/12 08:26:32 starvik
-- * Don't use C-comments inside CVS comments
-- *
-- * Revision 1.2 2002/12/11 15:42:02 starvik
-- * Extracted v10 (ETRAX 100LX) specific stuff from arch/cris/kernel/
-- *
-- * Revision 1.1 2002/11/18 07:58:06 starvik
-- * Fast timers (from Linux 2.4)
-- *
-- * Revision 1.5 2002/10/15 06:21:39 starvik
-- * Added call to init_waitqueue_head
-- *
-- * Revision 1.4 2002/05/28 17:47:59 johana
-- * Added del_fast_timer()
-- *
-- * Revision 1.3 2002/05/28 16:16:07 johana
-- * Handle empty fast_timer_list
-- *
-- * Revision 1.2 2002/05/27 15:38:42 johana
-- * Made it compile without warnings on Linux 2.4.
-- * (includes, wait_queue, PROC_FS and snprintf)
-- *
-- * Revision 1.1 2002/05/27 15:32:25 johana
-- * arch/etrax100/kernel/fasttimer.c v1.8 from the elinux tree.
-- *
-- * Revision 1.8 2001/11/27 13:50:40 pkj
-- * Disable interrupts while stopping the timer and while modifying the
-- * list of active timers in timer1_handler() as it may be interrupted
-- * by other interrupts (e.g., the serial interrupt) which may add fast
-- * timers.
-- *
-- * Revision 1.7 2001/11/22 11:50:32 pkj
-- * * Only store information about the last 16 timers.
-- * * proc_fasttimer_read() now uses an allocated buffer, since it
-- * requires more space than just a page even for only writing the
-- * last 16 timers. The buffer is only allocated on request, so
-- * unless /proc/fasttimer is read, it is never allocated.
-- * * Renamed fast_timer_started to fast_timers_started to match
-- * fast_timers_added and fast_timers_expired.
-- * * Some clean-up.
-- *
-- * Revision 1.6 2000/12/13 14:02:08 johana
-- * Removed volatile for fast_timer_list
-- *
-- * Revision 1.5 2000/12/13 13:55:35 johana
-- * Added DEBUG_LOG, added som cli() and cleanup
-- *
-- * Revision 1.4 2000/12/05 13:48:50 johana
-- * Added range check when writing proc file, modified timer int handling
-- *
-- * Revision 1.3 2000/11/23 10:10:20 johana
-- * More debug/logging possibilities.
-- * Moved GET_JIFFIES_USEC() to timex.h and time.c
-- *
-- * Revision 1.2 2000/11/01 13:41:04 johana
-- * Clean up and bugfixes.
-- * Created new do_gettimeofday_fast() that gets a timeval struct
-- * with time based on jiffies and *R_TIMER0_DATA, uses a table
-- * for fast conversion of timer value to microseconds.
-- * (Much faster the standard do_gettimeofday() and we don't really
-- * wan't to use the true time - we wan't the "uptime" so timers don't screw up
-- * when we change the time.
-- * TODO: Add efficient support for continuous timers as well.
-- *
-- * Revision 1.1 2000/10/26 15:49:16 johana
-- * Added fasttimer, highresolution timers.
-- *
-- * Copyright (C) 2000,2001 2002, 2003 Axis Communications AB, Lund, Sweden
-+ * Copyright (C) 2000-2006 Axis Communications AB, Lund, Sweden
- */
-
- #include <linux/errno.h>
-@@ -128,13 +28,13 @@
- #include <asm/fasttimer.h>
- #include <linux/proc_fs.h>
-
--/*
-- * timer0 is running at 100MHz and generating jiffies timer ticks
-+/*
-+ * timer0 is running at 100MHz and generating jiffies timer ticks
- * at 100 or 1000 HZ.
- * fasttimer gives an API that gives timers that expire "between" the jiffies
- * giving microsecond resolution (10 ns).
- * fasttimer uses reg_timer_rw_trig register to get interrupt when
-- * r_time reaches a certain value.
-+ * r_time reaches a certain value.
- */
-
-
-@@ -151,19 +51,19 @@
- #define SANITYCHECK(x)
- #endif
-
--#define D1(x)
--#define D2(x)
--#define DP(x)
-+#define D1(x)
-+#define D2(x)
-+#define DP(x)
-
- #define __INLINE__ inline
-
--static int fast_timer_running = 0;
--static int fast_timers_added = 0;
--static int fast_timers_started = 0;
--static int fast_timers_expired = 0;
--static int fast_timers_deleted = 0;
--static int fast_timer_is_init = 0;
--static int fast_timer_ints = 0;
-+static unsigned int fast_timer_running = 0;
-+static unsigned int fast_timers_added = 0;
-+static unsigned int fast_timers_started = 0;
-+static unsigned int fast_timers_expired = 0;
-+static unsigned int fast_timers_deleted = 0;
-+static unsigned int fast_timer_is_init = 0;
-+static unsigned int fast_timer_ints = 0;
-
- struct fast_timer *fast_timer_list = NULL;
-
-@@ -171,8 +71,8 @@
- #define DEBUG_LOG_MAX 128
- static const char * debug_log_string[DEBUG_LOG_MAX];
- static unsigned long debug_log_value[DEBUG_LOG_MAX];
--static int debug_log_cnt = 0;
--static int debug_log_cnt_wrapped = 0;
-+static unsigned int debug_log_cnt = 0;
-+static unsigned int debug_log_cnt_wrapped = 0;
-
- #define DEBUG_LOG(string, value) \
- { \
-@@ -202,48 +102,33 @@
- int timer_div_settings[NUM_TIMER_STATS];
- int timer_delay_settings[NUM_TIMER_STATS];
-
-+struct work_struct fast_work;
-
- static void
--timer_trig_handler(void);
-+timer_trig_handler(void* dummy);
-
-
-
- /* Not true gettimeofday, only checks the jiffies (uptime) + useconds */
--void __INLINE__ do_gettimeofday_fast(struct timeval *tv)
-+void __INLINE__ do_gettimeofday_fast(struct fasttime_t *tv)
- {
-- unsigned long sec = jiffies;
-- unsigned long usec = GET_JIFFIES_USEC();
--
-- usec += (sec % HZ) * (1000000 / HZ);
-- sec = sec / HZ;
--
-- if (usec > 1000000)
-- {
-- usec -= 1000000;
-- sec++;
-- }
-- tv->tv_sec = sec;
-- tv->tv_usec = usec;
-+ tv->tv_jiff = jiffies;
-+ tv->tv_usec = GET_JIFFIES_USEC();
- }
-
--int __INLINE__ timeval_cmp(struct timeval *t0, struct timeval *t1)
-+int __INLINE__ timeval_cmp(struct fasttime_t *t0, struct fasttime_t *t1)
- {
-- if (t0->tv_sec < t1->tv_sec)
-- {
-+ /* Compare jiffies. Takes care of wrapping */
-+ if (time_before(t0->tv_jiff, t1->tv_jiff))
- return -1;
-- }
-- else if (t0->tv_sec > t1->tv_sec)
-- {
-+ else if (time_after(t0->tv_jiff, t1->tv_jiff))
- return 1;
-- }
-+
-+ /* Compare us */
- if (t0->tv_usec < t1->tv_usec)
-- {
- return -1;
-- }
- else if (t0->tv_usec > t1->tv_usec)
-- {
- return 1;
-- }
- return 0;
- }
-
-@@ -254,20 +139,23 @@
- reg_timer_rw_intr_mask intr_mask;
- reg_timer_rw_trig trig;
- reg_timer_rw_trig_cfg trig_cfg = { 0 };
-- reg_timer_r_time r_time;
--
-- r_time = REG_RD(timer, regi_timer, r_time);
-+ reg_timer_r_time r_time0;
-+ reg_timer_r_time r_time1;
-+ unsigned char trig_wrap;
-+ unsigned char time_wrap;
-
-+ r_time0 = REG_RD(timer, regi_timer, r_time);
-+
- D1(printk("start_timer_trig : %d us freq: %i div: %i\n",
- delay_us, freq_index, div));
- /* Clear trig irq */
- intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
- intr_mask.trig = 0;
- REG_WR(timer, regi_timer, rw_intr_mask, intr_mask);
--
-- /* Set timer values */
-+
-+ /* Set timer values and check if trigger wraps. */
- /* r_time is 100MHz (10 ns resolution) */
-- trig = r_time + delay_us*(1000/10);
-+ trig_wrap = (trig = r_time0 + delay_us*(1000/10)) < r_time0;
-
- timer_div_settings[fast_timers_started % NUM_TIMER_STATS] = trig;
- timer_delay_settings[fast_timers_started % NUM_TIMER_STATS] = delay_us;
-@@ -275,15 +163,17 @@
- /* Ack interrupt */
- ack_intr.trig = 1;
- REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
--
-+
- /* Start timer */
- REG_WR(timer, regi_timer, rw_trig, trig);
- trig_cfg.tmr = regk_timer_time;
- REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
-
- /* Check if we have already passed the trig time */
-- r_time = REG_RD(timer, regi_timer, r_time);
-- if (r_time < trig) {
-+ r_time1 = REG_RD(timer, regi_timer, r_time);
-+ time_wrap = r_time1 < r_time0;
-+
-+ if ((trig_wrap && !time_wrap) || (r_time1 < trig)) {
- /* No, Enable trig irq */
- intr_mask = REG_RD(timer, regi_timer, rw_intr_mask);
- intr_mask.trig = 1;
-@@ -291,16 +181,17 @@
- fast_timers_started++;
- fast_timer_running = 1;
- }
-- else
-+ else
- {
- /* We have passed the time, disable trig point, ack intr */
- trig_cfg.tmr = regk_timer_off;
- REG_WR(timer, regi_timer, rw_trig_cfg, trig_cfg);
- REG_WR(timer, regi_timer, rw_ack_intr, ack_intr);
-- /* call the int routine directly */
-- timer_trig_handler();
-+ /* call the int routine */
-+ INIT_WORK(&fast_work, timer_trig_handler, (void*)NULL);
-+ schedule_work(&fast_work);
- }
--
-+
- }
-
- /* In version 1.4 this function takes 27 - 50 us */
-@@ -327,7 +218,7 @@
- {
- printk("timer name: %s data: 0x%08lX already in list!\n", name, data);
- sanity_failed++;
-- return;
-+ goto done;
- }
- else
- {
-@@ -343,11 +234,11 @@
- t->name = name;
-
- t->tv_expires.tv_usec = t->tv_set.tv_usec + delay_us % 1000000;
-- t->tv_expires.tv_sec = t->tv_set.tv_sec + delay_us / 1000000;
-+ t->tv_expires.tv_jiff = t->tv_set.tv_jiff + delay_us / 1000000 / HZ;
- if (t->tv_expires.tv_usec > 1000000)
- {
- t->tv_expires.tv_usec -= 1000000;
-- t->tv_expires.tv_sec++;
-+ t->tv_expires.tv_jiff += HZ;
- }
- #ifdef FAST_TIMER_LOG
- timer_added_log[fast_timers_added % NUM_TIMER_STATS] = *t;
-@@ -388,6 +279,7 @@
-
- D2(printk("start_one_shot_timer: %d us done\n", delay_us));
-
-+done:
- local_irq_restore(flags);
- } /* start_one_shot_timer */
-
-@@ -431,26 +323,32 @@
- /* Timer interrupt handler for trig interrupts */
-
- static irqreturn_t
--timer_trig_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+timer_trig_interrupt(int irq, void *dev_id)
- {
- reg_timer_r_masked_intr masked_intr;
--
- /* Check if the timer interrupt is for us (a trig int) */
- masked_intr = REG_RD(timer, regi_timer, r_masked_intr);
- if (!masked_intr.trig)
- return IRQ_NONE;
-- timer_trig_handler();
-+ timer_trig_handler(NULL);
- return IRQ_HANDLED;
- }
-
--static void timer_trig_handler(void)
-+static void timer_trig_handler(void* dummy)
- {
- reg_timer_rw_ack_intr ack_intr = { 0 };
- reg_timer_rw_intr_mask intr_mask;
- reg_timer_rw_trig_cfg trig_cfg = { 0 };
- struct fast_timer *t;
-- unsigned long flags;
-+ unsigned long flags;
-
-+ /* We keep interrupts disabled not only when we modify the
-+ * fast timer list, but any time we hold a reference to a
-+ * timer in the list, since del_fast_timer may be called
-+ * from (another) interrupt context. Thus, the only time
-+ * when interrupts are enabled is when calling the timer
-+ * callback function.
-+ */
- local_irq_save(flags);
-
- /* Clear timer trig interrupt */
-@@ -470,16 +368,17 @@
- fast_timer_running = 0;
- fast_timer_ints++;
-
-- local_irq_restore(flags);
-+ fast_timer_function_type *f;
-+ unsigned long d;
-
- t = fast_timer_list;
- while (t)
- {
-- struct timeval tv;
-+ struct fasttime_t tv;
-
- /* Has it really expired? */
- do_gettimeofday_fast(&tv);
-- D1(printk("t: %is %06ius\n", tv.tv_sec, tv.tv_usec));
-+ D1(printk("t: %is %06ius\n", tv.tv_jiff, tv.tv_usec));
-
- if (timeval_cmp(&t->tv_expires, &tv) <= 0)
- {
-@@ -490,7 +389,6 @@
- fast_timers_expired++;
-
- /* Remove this timer before call, since it may reuse the timer */
-- local_irq_save(flags);
- if (t->prev)
- {
- t->prev->next = t->next;
-@@ -505,11 +403,21 @@
- }
- t->prev = NULL;
- t->next = NULL;
-- local_irq_restore(flags);
-
-- if (t->function != NULL)
-+ /* Save function callback data before enabling interrupts,
-+ * since the timer may be removed and we don't know how it
-+ * was allocated (e.g. ->function and ->data may become
-+ * overwritten after deletion if the timer was stack-allocated).
-+ */
-+ f = t->function;
-+ d = t->data;
-+
-+ if (f != NULL)
- {
-- t->function(t->data);
-+ /* Run the callback function with interrupts enabled. */
-+ local_irq_restore(flags);
-+ f(d);
-+ local_irq_save(flags);
- }
- else
- {
-@@ -522,16 +430,19 @@
- D1(printk(".\n"));
- }
-
-- local_irq_save(flags);
- if ((t = fast_timer_list) != NULL)
- {
- /* Start next timer.. */
-- long us;
-- struct timeval tv;
-+ long us = 0;
-+ struct fasttime_t tv;
-
- do_gettimeofday_fast(&tv);
-- us = ((t->tv_expires.tv_sec - tv.tv_sec) * 1000000 +
-- t->tv_expires.tv_usec - tv.tv_usec);
-+
-+ /* time_after_eq takes care of wrapping */
-+ if (time_after_eq(t->tv_expires.tv_jiff, tv.tv_jiff))
-+ us = ((t->tv_expires.tv_jiff - tv.tv_jiff) * 1000000 / HZ +
-+ t->tv_expires.tv_usec - tv.tv_usec);
-+
- if (us > 0)
- {
- if (!fast_timer_running)
-@@ -541,7 +452,6 @@
- #endif
- start_timer_trig(us);
- }
-- local_irq_restore(flags);
- break;
- }
- else
-@@ -552,9 +462,10 @@
- D1(printk("e! %d\n", us));
- }
- }
-- local_irq_restore(flags);
- }
-
-+ local_irq_restore(flags);
-+
- if (!t)
- {
- D1(printk("ttrig stop!\n"));
-@@ -577,28 +488,17 @@
- void schedule_usleep(unsigned long us)
- {
- struct fast_timer t;
--#ifdef DECLARE_WAITQUEUE
- wait_queue_head_t sleep_wait;
- init_waitqueue_head(&sleep_wait);
-- {
-- DECLARE_WAITQUEUE(wait, current);
--#else
-- struct wait_queue *sleep_wait = NULL;
-- struct wait_queue wait = { current, NULL };
--#endif
-
- D1(printk("schedule_usleep(%d)\n", us));
-- add_wait_queue(&sleep_wait, &wait);
-- set_current_state(TASK_INTERRUPTIBLE);
- start_one_shot_timer(&t, wake_up_func, (unsigned long)&sleep_wait, us,
- "usleep");
-- schedule();
-- set_current_state(TASK_RUNNING);
-- remove_wait_queue(&sleep_wait, &wait);
-+ /* Uninterruptible sleep on the fast timer. (The condition is somewhat
-+ redundant since the timer is what wakes us up.) */
-+ wait_event(sleep_wait, !fast_timer_pending(&t));
-+
- D1(printk("done schedule_usleep(%d)\n", us));
--#ifdef DECLARE_WAITQUEUE
-- }
--#endif
- }
-
- #ifdef CONFIG_PROC_FS
-@@ -638,7 +538,7 @@
- unsigned long flags;
- int i = 0;
- int num_to_show;
-- struct timeval tv;
-+ struct fasttime_t tv;
- struct fast_timer *t, *nextt;
- static char *bigbuf = NULL;
- static unsigned long used;
-@@ -646,7 +546,8 @@
- if (!bigbuf && !(bigbuf = vmalloc(BIG_BUF_SIZE)))
- {
- used = 0;
-- bigbuf[0] = '\0';
-+ if (buf)
-+ buf[0] = '\0';
- return 0;
- }
-
-@@ -668,7 +569,7 @@
- used += sprintf(bigbuf + used, "Fast timer running: %s\n",
- fast_timer_running ? "yes" : "no");
- used += sprintf(bigbuf + used, "Current time: %lu.%06lu\n",
-- (unsigned long)tv.tv_sec,
-+ (unsigned long)tv.tv_jiff,
- (unsigned long)tv.tv_usec);
- #ifdef FAST_TIMER_SANITY_CHECKS
- used += sprintf(bigbuf + used, "Sanity failed: %i\n",
-@@ -717,9 +618,9 @@
- "d: %6li us data: 0x%08lX"
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
-@@ -739,9 +640,9 @@
- "d: %6li us data: 0x%08lX"
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
-@@ -759,9 +660,9 @@
- "d: %6li us data: 0x%08lX"
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
-@@ -772,7 +673,6 @@
-
- used += sprintf(bigbuf + used, "Active timers:\n");
- local_irq_save(flags);
-- local_irq_save(flags);
- t = fast_timer_list;
- while (t != NULL && (used+100 < BIG_BUF_SIZE))
- {
-@@ -783,15 +683,15 @@
- /* " func: 0x%08lX" */
- "\n",
- t->name,
-- (unsigned long)t->tv_set.tv_sec,
-+ (unsigned long)t->tv_set.tv_jiff,
- (unsigned long)t->tv_set.tv_usec,
-- (unsigned long)t->tv_expires.tv_sec,
-+ (unsigned long)t->tv_expires.tv_jiff,
- (unsigned long)t->tv_expires.tv_usec,
- t->delay_us,
- t->data
- /* , t->function */
- );
-- local_irq_disable();
-+ local_irq_save(flags);
- if (t->next != nextt)
- {
- printk("timer removed!\n");
-@@ -822,7 +722,7 @@
- static struct fast_timer tr[10];
- static int exp_num[10];
-
--static struct timeval tv_exp[100];
-+static struct fasttime_t tv_exp[100];
-
- static void test_timeout(unsigned long data)
- {
-@@ -860,7 +760,7 @@
- int prev_num;
- int j;
-
-- struct timeval tv, tv0, tv1, tv2;
-+ struct fasttime_t tv, tv0, tv1, tv2;
-
- printk("fast_timer_test() start\n");
- do_gettimeofday_fast(&tv);
-@@ -873,7 +773,7 @@
- {
- do_gettimeofday_fast(&tv_exp[j]);
- }
-- printk("fast_timer_test() %is %06i\n", tv.tv_sec, tv.tv_usec);
-+ printk("fast_timer_test() %is %06i\n", tv.tv_jiff, tv.tv_usec);
-
- for (j = 0; j < 1000; j++)
- {
-@@ -883,11 +783,11 @@
- for (j = 0; j < 100; j++)
- {
- printk("%i.%i %i.%i %i.%i %i.%i %i.%i\n",
-- tv_exp[j].tv_sec,tv_exp[j].tv_usec,
-- tv_exp[j+1].tv_sec,tv_exp[j+1].tv_usec,
-- tv_exp[j+2].tv_sec,tv_exp[j+2].tv_usec,
-- tv_exp[j+3].tv_sec,tv_exp[j+3].tv_usec,
-- tv_exp[j+4].tv_sec,tv_exp[j+4].tv_usec);
-+ tv_exp[j].tv_jiff,tv_exp[j].tv_usec,
-+ tv_exp[j+1].tv_jiff,tv_exp[j+1].tv_usec,
-+ tv_exp[j+2].tv_jiff,tv_exp[j+2].tv_usec,
-+ tv_exp[j+3].tv_jiff,tv_exp[j+3].tv_usec,
-+ tv_exp[j+4].tv_jiff,tv_exp[j+4].tv_usec);
- j += 4;
- }
- do_gettimeofday_fast(&tv0);
-@@ -919,9 +819,9 @@
- }
- }
- do_gettimeofday_fast(&tv2);
-- printk("Timers started %is %06i\n", tv0.tv_sec, tv0.tv_usec);
-- printk("Timers started at %is %06i\n", tv1.tv_sec, tv1.tv_usec);
-- printk("Timers done %is %06i\n", tv2.tv_sec, tv2.tv_usec);
-+ printk("Timers started %is %06i\n", tv0.tv_jiff, tv0.tv_usec);
-+ printk("Timers started at %is %06i\n", tv1.tv_jiff, tv1.tv_usec);
-+ printk("Timers done %is %06i\n", tv2.tv_jiff, tv2.tv_usec);
- DP(printk("buf0:\n");
- printk(buf0);
- printk("buf1:\n");
-@@ -943,9 +843,9 @@
- printk("%-10s set: %6is %06ius exp: %6is %06ius "
- "data: 0x%08X func: 0x%08X\n",
- t->name,
-- t->tv_set.tv_sec,
-+ t->tv_set.tv_jiff,
- t->tv_set.tv_usec,
-- t->tv_expires.tv_sec,
-+ t->tv_expires.tv_jiff,
- t->tv_expires.tv_usec,
- t->data,
- t->function
-@@ -953,10 +853,10 @@
-
- printk(" del: %6ius did exp: %6is %06ius as #%i error: %6li\n",
- t->delay_us,
-- tv_exp[j].tv_sec,
-+ tv_exp[j].tv_jiff,
- tv_exp[j].tv_usec,
- exp_num[j],
-- (tv_exp[j].tv_sec - t->tv_expires.tv_sec)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
-+ (tv_exp[j].tv_jiff - t->tv_expires.tv_jiff)*1000000 + tv_exp[j].tv_usec - t->tv_expires.tv_usec);
- }
- proc_fasttimer_read(buf5, NULL, 0, 0, 0);
- printk("buf5 after all done:\n");
-@@ -966,7 +866,7 @@
- #endif
-
-
--void fast_timer_init(void)
-+int fast_timer_init(void)
- {
- /* For some reason, request_irq() hangs when called froom time_init() */
- if (!fast_timer_is_init)
-@@ -981,10 +881,10 @@
- proc_register_dynamic(&proc_root, &fasttimer_proc_entry);
- #endif
- #endif /* PROC_FS */
-- if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, IRQF_DISABLED,
-- "fast timer int", NULL))
-+ if(request_irq(TIMER_INTR_VECT, timer_trig_interrupt, SA_SHIRQ | SA_INTERRUPT,
-+ "fast timer int", &fast_timer_list))
- {
-- printk("err: timer1 irq\n");
-+ printk("err: fasttimer irq\n");
- }
- fast_timer_is_init = 1;
- #ifdef FAST_TIMER_TEST
-@@ -992,4 +892,6 @@
- fast_timer_test();
- #endif
- }
-+ return 0;
- }
-+__initcall(fast_timer_init);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/head.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/head.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/head.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/head.S 2007-01-09 10:29:19.000000000 +0100
-@@ -4,7 +4,6 @@
- * Copyright (C) 2003, Axis Communications AB
- */
-
--
- #define ASSEMBLER_MACROS_ONLY
-
- /*
-@@ -12,14 +11,21 @@
- * -traditional must not be used when assembling this file.
- */
- #include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/memmap.h>
-+#include <asm/arch/hwregs/intr_vect.h>
- #include <asm/arch/hwregs/asm/mmu_defs_asm.h>
- #include <asm/arch/hwregs/asm/reg_map_asm.h>
- #include <asm/arch/hwregs/asm/config_defs_asm.h>
- #include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
--
-+#include <asm/arch/hwregs/asm/pinmux_defs_asm.h>
-+#include <asm/arch/hwregs/asm/gio_defs_asm.h>
-+
- #define CRAMFS_MAGIC 0x28cd3d45
-+#define JHEAD_MAGIC 0x1FF528A6
-+#define JHEAD_SIZE 8
- #define RAM_INIT_MAGIC 0x56902387
--#define COMMAND_LINE_MAGIC 0x87109563
-+#define COMMAND_LINE_MAGIC 0x87109563
-+#define NAND_BOOT_MAGIC 0x9a9db001
-
- ;; NOTE: R8 and R9 carry information from the decompressor (if the
- ;; kernel was compressed). They must not be used in the code below
-@@ -30,11 +36,10 @@
- .global romfs_start
- .global romfs_length
- .global romfs_in_flash
-+ .global nand_boot
- .global swapper_pg_dir
-- .global crisv32_nand_boot
-- .global crisv32_nand_cramfs_offset
-
-- ;; Dummy section to make it bootable with current VCS simulator
-+ ;; Dummy section to make it bootable with current VCS simulator
- #ifdef CONFIG_ETRAXFS_SIM
- .section ".boot", "ax"
- ba tstart
-@@ -42,13 +47,13 @@
- #endif
-
- .text
--tstart:
-+tstart:
- ;; This is the entry point of the kernel. The CPU is currently in
- ;; supervisor mode.
-- ;;
-+ ;;
- ;; 0x00000000 if flash.
- ;; 0x40004000 if DRAM.
-- ;;
-+ ;;
- di
-
- ;; Start clocks for used blocks.
-@@ -72,20 +77,25 @@
- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
- move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
- move.d $r1, [$r0]
--
--#ifdef CONFIG_ETRAXFS_SIM
-+
-+#ifdef CONFIG_ETRAXFS_SIM
- ;; Set up minimal flash waitstates
- move.d 0, $r10
- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
- move.d $r10, [$r11]
--#endif
-+#endif
-
-+#ifdef CONFIG_SMP
-+secondary_cpu_entry: /* Entry point for secondary CPUs */
-+ di
-+#endif
-+
- ;; Setup and enable the MMU. Use same configuration for both the data
- ;; and the instruction MMU.
- ;;
- ;; Note; 3 cycles is needed for a bank-select to take effect. Further;
- ;; bank 1 is the instruction MMU, bank 2 is the data MMU.
--#ifndef CONFIG_ETRAXFS_SIM
-+#ifndef CONFIG_ETRAXFS_SIM
- move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
- | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
- | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
-@@ -96,7 +106,7 @@
- | REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \
- | REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \
- | REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
--#endif
-+#endif
-
- ;; Temporary map of 0x40 -> 0x40 and 0x00 -> 0x00.
- move.d REG_FIELD(mmu, rw_mm_kbase_lo, base_4, 4) \
-@@ -146,8 +156,8 @@
- | REG_STATE(mmu, rw_mm_cfg, seg_2, page) \
- | REG_STATE(mmu, rw_mm_cfg, seg_1, page) \
- | REG_STATE(mmu, rw_mm_cfg, seg_0, linear), $r2
--#endif
--
-+#endif
-+
- ;; Update instruction MMU.
- move 1, $srs
- nop
-@@ -165,7 +175,7 @@
- move $r0, $s2 ; kbase_hi.
- move $r1, $s1 ; kbase_lo
- move $r2, $s0 ; mm_cfg, virtual memory configuration.
--
-+
- ;; Enable data and instruction MMU.
- move 0, $srs
- moveq 0xf, $r0 ; IMMU, DMMU, DCache, Icache on
-@@ -183,17 +193,11 @@
- nop
- nop
- nop
-- move $s10, $r0
-+ move $s12, $r0
- cmpq 0, $r0
- beq master_cpu
- nop
- slave_cpu:
-- ; A slave waits for cpu_now_booting to be equal to CPU ID.
-- move.d cpu_now_booting, $r1
--slave_wait:
-- cmp.d [$r1], $r0
-- bne slave_wait
-- nop
- ; Time to boot-up. Get stack location provided by master CPU.
- move.d smp_init_current_idle_thread, $r1
- move.d [$r1], $sp
-@@ -203,9 +207,16 @@
- jsr smp_callin
- nop
- master_cpu:
--#endif
-+ /* Set up entry point for secondary CPUs. The boot ROM has set up
-+ * EBP at start of internal memory. The CPU will get there
-+ * later when we issue an IPI to them... */
-+ move.d MEM_INTMEM_START + IPI_INTR_VECT * 4, $r0
-+ move.d secondary_cpu_entry, $r1
-+ move.d $r1, [$r0]
-+#endif
- #ifndef CONFIG_ETRAXFS_SIM
-- ;; Check if starting from DRAM or flash.
-+ ; Check if starting from DRAM (network->RAM boot or unpacked
-+ ; compressed kernel), or directly from flash.
- lapcq ., $r0
- and.d 0x7fffffff, $r0 ; Mask off the non-cache bit.
- cmp.d 0x10000, $r0 ; Arbitrary, something above this code.
-@@ -238,6 +249,7 @@
- ;; Copy the text and data section to DRAM. This depends on that the
- ;; variables used below are correctly set up by the linker script.
- ;; The calculated value stored in R4 is used below.
-+ ;; Leave the cramfs file system (piggybacked after the kernel) in flash.
- moveq 0, $r0 ; Source.
- move.d text_start, $r1 ; Destination.
- move.d __vmlinux_end, $r2
-@@ -249,7 +261,7 @@
- blo 1b
- nop
-
-- ;; Keep CRAMFS in flash.
-+ ;; Check for cramfs.
- moveq 0, $r0
- move.d romfs_length, $r1
- move.d $r0, [$r1]
-@@ -257,7 +269,8 @@
- cmp.d CRAMFS_MAGIC, $r0
- bne 1f
- nop
--
-+
-+ ;; Set length and start of cramfs, set romfs_in_flash flag
- addoq +4, $r4, $acr
- move.d [$acr], $r0
- move.d romfs_length, $r1
-@@ -273,35 +286,32 @@
- nop
-
- _inram:
-- ;; Check if booting from NAND flash (in that case we just remember the offset
-- ;; into the flash where cramfs should be).
-- move.d REG_ADDR(config, regi_config, r_bootsel), $r0
-- move.d [$r0], $r0
-- and.d REG_MASK(config, r_bootsel, boot_mode), $r0
-- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
-- bne move_cramfs
-- moveq 1,$r0
-- move.d crisv32_nand_boot, $r1
-- move.d $r0, [$r1]
-- move.d crisv32_nand_cramfs_offset, $r1
-- move.d $r9, [$r1]
-+ ;; Check if booting from NAND flash; if so, set appropriate flags
-+ ;; and move on.
-+ cmp.d NAND_BOOT_MAGIC, $r12
-+ bne move_cramfs ; not nand, jump
- moveq 1, $r0
-- move.d romfs_in_flash, $r1
-+ move.d nand_boot, $r1 ; tell axisflashmap we're booting from NAND
-+ move.d $r0, [$r1]
-+ moveq 0, $r0 ; tell axisflashmap romfs is not in
-+ move.d romfs_in_flash, $r1 ; (directly accessed) flash
- move.d $r0, [$r1]
-- jump _start_it
-+ jump _start_it ; continue with boot
- nop
-
--move_cramfs:
-- ;; Move the cramfs after BSS.
-+move_cramfs:
-+ ;; kernel is in DRAM.
-+ ;; Must figure out if there is a piggybacked rootfs image or not.
-+ ;; Set romfs_length to 0 => no rootfs image available by default.
- moveq 0, $r0
- move.d romfs_length, $r1
- move.d $r0, [$r1]
-
--#ifndef CONFIG_ETRAXFS_SIM
-+#ifndef CONFIG_ETRAXFS_SIM
- ;; The kernel could have been unpacked to DRAM by the loader, but
-- ;; the cramfs image could still be inte the flash immediately
-- ;; following the compressed kernel image. The loaded passes the address
-- ;; of the bute succeeding the last compressed byte in the flash in
-+ ;; the cramfs image could still be in the flash immediately
-+ ;; following the compressed kernel image. The loader passes the address
-+ ;; of the byte succeeding the last compressed byte in the flash in
- ;; register R9 when starting the kernel.
- cmp.d 0x0ffffff8, $r9
- bhs _no_romfs_in_flash ; R9 points outside the flash area.
-@@ -309,12 +319,14 @@
- #else
- ba _no_romfs_in_flash
- nop
--#endif
-+#endif
-+ ;; cramfs rootfs might to be in flash. Check for it.
- move.d [$r9], $r0 ; cramfs_super.magic
- cmp.d CRAMFS_MAGIC, $r0
- bne _no_romfs_in_flash
- nop
-
-+ ;; found cramfs in flash. set address and size, and romfs_in_flash flag.
- addoq +4, $r9, $acr
- move.d [$acr], $r0
- move.d romfs_length, $r1
-@@ -330,29 +342,45 @@
- nop
-
- _no_romfs_in_flash:
-- ;; Look for cramfs.
--#ifndef CONFIG_ETRAXFS_SIM
-+ ;; No romfs in flash, so look for cramfs, or jffs2 with jhead,
-+ ;; after kernel in RAM, as is the case with network->RAM boot.
-+ ;; For cramfs, partition starts with magic and length.
-+ ;; For jffs2, a jhead is prepended which contains with magic and length.
-+ ;; The jhead is not part of the jffs2 partition however.
-+#ifndef CONFIG_ETRAXFS_SIM
- move.d __vmlinux_end, $r0
- #else
-- move.d __end, $r0
--#endif
-+ move.d __end, $r0
-+#endif
- move.d [$r0], $r1
-- cmp.d CRAMFS_MAGIC, $r1
-- bne 2f
-+ cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic?
-+ beq 2f ; yes, jump
-+ nop
-+ cmp.d JHEAD_MAGIC, $r1 ; jffs2 (jhead) magic?
-+ bne 4f ; no, skip copy
-+ nop
-+ addq 4, $r0 ; location of jffs2 size
-+ move.d [$r0+], $r2 ; fetch jffs2 size -> r2
-+ ; r0 now points to start of jffs2
-+ ba 3f
- nop
-+2:
-+ addoq +4, $r0, $acr ; location of cramfs size
-+ move.d [$acr], $r2 ; fetch cramfs size -> r2
-+ ; r0 still points to start of cramfs
-+3:
-+ ;; Now, move the root fs to after kernel's BSS
-
-- addoq +4, $r0, $acr
-- move.d [$acr], $r2
-- move.d _end, $r1
-+ move.d _end, $r1 ; start of cramfs -> r1
- move.d romfs_start, $r3
-- move.d $r1, [$r3]
-+ move.d $r1, [$r3] ; store at romfs_start (for axisflashmap)
- move.d romfs_length, $r3
-- move.d $r2, [$r3]
-+ move.d $r2, [$r3] ; store size at romfs_length
-
--#ifndef CONFIG_ETRAXFS_SIM
-- add.d $r2, $r0
-+#ifndef CONFIG_ETRAXFS_SIM
-+ add.d $r2, $r0 ; copy from end and downwards
- add.d $r2, $r1
--
-+
- lsrq 1, $r2 ; Size is in bytes, we copy words.
- addq 1, $r2
- 1:
-@@ -364,17 +392,24 @@
- bne 1b
- nop
- #endif
--
--2:
-+
-+4:
-+ ;; BSS move done.
-+ ;; Clear romfs_in_flash flag, as we now know romfs is in DRAM
-+ ;; Also clear nand_boot flag; if we got here, we know we've not
-+ ;; booted from NAND flash.
- moveq 0, $r0
- move.d romfs_in_flash, $r1
- move.d $r0, [$r1]
-+ moveq 0, $r0
-+ move.d nand_boot, $r1
-+ move.d $r0, [$r1]
-
- jump _start_it ; Jump to cached code.
- nop
--
-+
- _start_it:
--
-+
- ;; Check if kernel command line is supplied
- cmp.d COMMAND_LINE_MAGIC, $r10
- bne no_command_line
-@@ -383,9 +418,9 @@
- move.d 256, $r13
- move.d cris_command_line, $r10
- or.d 0x80000000, $r11 ; Make it virtual
--1:
-- move.b [$r11+], $r12
-- move.b $r12, [$r10+]
-+1:
-+ move.b [$r11+], $r1
-+ move.b $r1, [$r10+]
- subq 1, $r13
- bne 1b
- nop
-@@ -401,7 +436,7 @@
- move.d etrax_irv, $r1 ; Set the exception base register and pointer.
- move.d $r0, [$r1]
-
--#ifndef CONFIG_ETRAXFS_SIM
-+#ifndef CONFIG_ETRAXFS_SIM
- ;; Clear the BSS region from _bss_start to _end.
- move.d __bss_start, $r0
- move.d _end, $r1
-@@ -429,17 +464,31 @@
- .data
- etrax_irv:
- .dword 0
-+
-+; Variables for communication with the Axis flash map driver (axisflashmap),
-+; and for setting up memory in arch/cris/kernel/setup.c .
-+
-+; romfs_start is set to the start of the root file system, if it exists
-+; in directly accessible memory (i.e. NOR Flash when booting from Flash,
-+; or RAM when booting directly from a network-downloaded RAM image)
- romfs_start:
- .dword 0
-+
-+; romfs_length is set to the size of the root file system image, if it exists
-+; in directly accessible memory (see romfs_start). Otherwise it is set to 0.
- romfs_length:
- .dword 0
-+
-+; romfs_in_flash is set to 1 if the root file system resides in directly
-+; accessible flash memory (i.e. NOR flash). It is set to 0 for RAM boot
-+; or NAND flash boot.
- romfs_in_flash:
- .dword 0
--crisv32_nand_boot:
-- .dword 0
--crisv32_nand_cramfs_offset:
-- .dword 0
-
-+; nand_boot is set to 1 when the kernel has been booted from NAND flash
-+nand_boot:
-+ .dword 0
-+
- swapper_pg_dir = 0xc0002000
-
- .section ".init.data", "aw"
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/io.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/io.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/io.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/io.c 2006-11-21 00:04:55.000000000 +0100
-@@ -1,7 +1,7 @@
--/*
-+/*
- * Helper functions for I/O pins.
- *
-- * Copyright (c) 2004 Axis Communications AB.
-+ * Copyright (c) 2004, 2006 Axis Communications AB.
- */
-
- #include <linux/types.h>
-@@ -15,6 +15,10 @@
- #include <asm/arch/pinmux.h>
- #include <asm/arch/hwregs/gio_defs.h>
-
-+#ifndef DEBUG
-+#define DEBUG(x)
-+#endif
-+
- struct crisv32_ioport crisv32_ioports[] =
- {
- {
-@@ -46,13 +50,15 @@
- (unsigned long*)REG_ADDR(gio, regi_gio, rw_pe_dout),
- (unsigned long*)REG_ADDR(gio, regi_gio, r_pe_din),
- 18
-- }
-+ }
- };
-
- #define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
-
--struct crisv32_iopin crisv32_led1_green;
--struct crisv32_iopin crisv32_led1_red;
-+struct crisv32_iopin crisv32_led_net0_green;
-+struct crisv32_iopin crisv32_led_net0_red;
-+struct crisv32_iopin crisv32_led_net1_green;
-+struct crisv32_iopin crisv32_led_net1_red;
- struct crisv32_iopin crisv32_led2_green;
- struct crisv32_iopin crisv32_led2_red;
- struct crisv32_iopin crisv32_led3_green;
-@@ -76,34 +82,54 @@
- static int __init crisv32_io_init(void)
- {
- int ret = 0;
-+
-+ u32 i;
-+
-+ /* Locks *should* be dynamically initialized. */
-+ for (i = 0; i < ARRAY_SIZE(crisv32_ioports); i++)
-+ spin_lock_init (&crisv32_ioports[i].lock);
-+ spin_lock_init (&dummy_port.lock);
-+
- /* Initialize LEDs */
-- ret += crisv32_io_get_name(&crisv32_led1_green, CONFIG_ETRAX_LED1G);
-- ret += crisv32_io_get_name(&crisv32_led1_red, CONFIG_ETRAX_LED1R);
-+#if (defined(CONFIG_ETRAX_NBR_LED_GRP_ONE) || defined(CONFIG_ETRAX_NBR_LED_GRP_TWO))
-+ ret += crisv32_io_get_name(&crisv32_led_net0_green, CONFIG_ETRAX_LED_G_NET0);
-+ crisv32_io_set_dir(&crisv32_led_net0_green, crisv32_io_dir_out);
-+ if (strcmp(CONFIG_ETRAX_LED_G_NET0, CONFIG_ETRAX_LED_R_NET0)) {
-+ ret += crisv32_io_get_name(&crisv32_led_net0_red, CONFIG_ETRAX_LED_R_NET0);
-+ crisv32_io_set_dir(&crisv32_led_net0_red, crisv32_io_dir_out);
-+ } else
-+ crisv32_led_net0_red = dummy_led;
-+#endif
-+
-+#ifdef CONFIG_ETRAX_NBR_LED_GRP_TWO
-+ ret += crisv32_io_get_name(&crisv32_led_net1_green, CONFIG_ETRAX_LED_G_NET1);
-+ crisv32_io_set_dir(&crisv32_led_net1_green, crisv32_io_dir_out);
-+ if (strcmp(CONFIG_ETRAX_LED_G_NET1, CONFIG_ETRAX_LED_R_NET1)) {
-+ crisv32_io_get_name(&crisv32_led_net1_red, CONFIG_ETRAX_LED_R_NET1);
-+ crisv32_io_set_dir(&crisv32_led_net1_red, crisv32_io_dir_out);
-+ } else
-+ crisv32_led_net1_red = dummy_led;
-+#endif
-+
- ret += crisv32_io_get_name(&crisv32_led2_green, CONFIG_ETRAX_LED2G);
- ret += crisv32_io_get_name(&crisv32_led2_red, CONFIG_ETRAX_LED2R);
- ret += crisv32_io_get_name(&crisv32_led3_green, CONFIG_ETRAX_LED3G);
- ret += crisv32_io_get_name(&crisv32_led3_red, CONFIG_ETRAX_LED3R);
-- crisv32_io_set_dir(&crisv32_led1_green, crisv32_io_dir_out);
-- crisv32_io_set_dir(&crisv32_led1_red, crisv32_io_dir_out);
-+
- crisv32_io_set_dir(&crisv32_led2_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led2_red, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_green, crisv32_io_dir_out);
- crisv32_io_set_dir(&crisv32_led3_red, crisv32_io_dir_out);
-
-- if (!strcmp(CONFIG_ETRAX_LED1G, CONFIG_ETRAX_LED1R))
-- crisv32_led1_red = dummy_led;
-- if (!strcmp(CONFIG_ETRAX_LED2G, CONFIG_ETRAX_LED2R))
-- crisv32_led2_red = dummy_led;
--
- return ret;
- }
-
- __initcall(crisv32_io_init);
-
--int crisv32_io_get(struct crisv32_iopin* iopin,
-+int crisv32_io_get(struct crisv32_iopin* iopin,
- unsigned int port, unsigned int pin)
- {
-- if (port > NBR_OF_PORTS)
-+ if (port > NBR_OF_PORTS)
- return -EINVAL;
- if (port > crisv32_ioports[port].pin_count)
- return -EINVAL;
-@@ -111,14 +137,17 @@
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
-- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
-+ /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
-+ /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
-+ if (port != 0 && crisv32_pinmux_alloc(port-1, pin, pin, pinmux_gpio))
- return -EIO;
--
-+ DEBUG(printk("crisv32_io_get: Allocated pin %d on port %d\n", pin, port ));
-+
- return 0;
- }
-
- int crisv32_io_get_name(struct crisv32_iopin* iopin,
-- char* name)
-+ const char* name)
- {
- int port;
- int pin;
-@@ -128,7 +157,7 @@
-
- if (toupper(*name) < 'A' || toupper(*name) > 'E')
- return -EINVAL;
--
-+
- port = toupper(*name) - 'A';
- name++;
- pin = simple_strtoul(name, NULL, 10);
-@@ -139,9 +168,12 @@
- iopin->bit = 1 << pin;
- iopin->port = &crisv32_ioports[port];
-
-- if (crisv32_pinmux_alloc(port, pin, pin, pinmux_gpio))
-+ /* Only allocate pinmux gpiopins if port != PORT_A (port 0) */
-+ /* NOTE! crisv32_pinmux_alloc thinks PORT_B is port 0 */
-+ if (port != 0 && crisv32_pinmux_alloc(port-1, pin, pin, pinmux_gpio))
- return -EIO;
-
-+ DEBUG(printk("crisv32_io_get_name: Allocated pin %d on port %d\n", pin, port));
- return 0;
- }
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/irq.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/irq.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/irq.c 2006-10-13 14:43:13.000000000 +0200
-@@ -44,10 +44,10 @@
- cpumask_t mask; /* The CPUs to which the IRQ may be allocated. */
- };
-
--struct cris_irq_allocation irq_allocations[NR_IRQS] =
-+struct cris_irq_allocation irq_allocations[NR_IRQS] =
- {[0 ... NR_IRQS - 1] = {0, CPU_MASK_ALL}};
-
--static unsigned long irq_regs[NR_CPUS] =
-+static unsigned long irq_regs[NR_CPUS] =
- {
- regi_irq,
- #ifdef CONFIG_SMP
-@@ -79,9 +79,9 @@
- extern void kgdb_init(void);
- extern void breakpoint(void);
-
--/*
-- * Build the IRQ handler stubs using macros from irq.h. First argument is the
-- * IRQ number, the second argument is the corresponding bit in
-+/*
-+ * Build the IRQ handler stubs using macros from irq.h. First argument is the
-+ * IRQ number, the second argument is the corresponding bit in
- * intr_rw_vect_mask found in asm/arch/hwregs/intr_vect_defs.h.
- */
- BUILD_IRQ(0x31, (1 << 0)) /* memarb */
-@@ -139,7 +139,7 @@
-
- spin_lock_irqsave(&irq_lock, flags);
- intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
--
-+
- /* Remember; 1 let thru, 0 block. */
- intr_mask &= ~(1 << (irq - FIRST_IRQ));
-
-@@ -152,10 +152,10 @@
- {
- int intr_mask;
- unsigned long flags;
--
-+
- spin_lock_irqsave(&irq_lock, flags);
- intr_mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
--
-+
- /* Remember; 1 let thru, 0 block. */
- intr_mask |= (1 << (irq - FIRST_IRQ));
-
-@@ -168,7 +168,7 @@
- {
- int cpu;
- unsigned long flags;
--
-+
- spin_lock_irqsave(&irq_lock, flags);
- cpu = irq_allocations[irq - FIRST_IRQ].cpu;
-
-@@ -178,12 +178,12 @@
- spin_unlock_irqrestore(&irq_lock, flags);
- return smp_processor_id();
- }
--
-+
-
- /* Let the interrupt stay if possible */
- if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask))
- goto out;
--
-+
- /* IRQ must be moved to another CPU. */
- cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask);
- irq_allocations[irq - FIRST_IRQ].cpu = cpu;
-@@ -287,7 +287,7 @@
- * interrupt from the CPU and software has to sort out which
- * interrupts that happened. There are two special cases here:
- *
-- * 1. Timer interrupts may never be blocked because of the
-+ * 1. Timer interrupts may never be blocked because of the
- * watchdog (refer to comment in include/asr/arch/irq.h)
- * 2. GDB serial port IRQs are unhandled here and will be handled
- * as a single IRQ when it strikes again because the GDB
-@@ -304,33 +304,33 @@
- cpu = smp_processor_id();
-
- /* An extra irq_enter here to prevent softIRQs to run after
-- * each do_IRQ. This will decrease the interrupt latency.
-+ * each do_IRQ. This will decrease the interrupt latency.
- */
- irq_enter();
-
- /* Get which IRQs that happend. */
- masked = REG_RD_INT(intr_vect, irq_regs[cpu], r_masked_vect);
--
-+
- /* Calculate new IRQ mask with these IRQs disabled. */
- mask = REG_RD_INT(intr_vect, irq_regs[cpu], rw_mask);
- mask &= ~masked;
-
- /* Timer IRQ is never masked */
- if (masked & TIMER_MASK)
-- mask |= TIMER_MASK;
-+ mask |= TIMER_MASK;
-
- /* Block all the IRQs */
- REG_WR_INT(intr_vect, irq_regs[cpu], rw_mask, mask);
--
-+
- /* Check for timer IRQ and handle it special. */
- if (masked & TIMER_MASK) {
- masked &= ~TIMER_MASK;
-- do_IRQ(TIMER_INTR_VECT, regs);
-+ do_IRQ(TIMER_INTR_VECT, regs);
- }
-
- #ifdef IGNORE_MASK
- /* Remove IRQs that can't be handled as multiple. */
-- masked &= ~IGNORE_MASK;
-+ masked &= ~IGNORE_MASK;
- #endif
-
- /* Handle the rest of the IRQs. */
-@@ -377,7 +377,7 @@
- irq_desc[TIMER_INTR_VECT].status |= IRQ_PER_CPU;
- irq_allocations[IPI_INTR_VECT - FIRST_IRQ].cpu = CPU_FIXED;
- irq_desc[IPI_INTR_VECT].status |= IRQ_PER_CPU;
--
-+
- set_exception_vector(0x00, nmi_interrupt);
- set_exception_vector(0x30, multiple_interrupt);
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb.c 2005-07-06 11:40:49.000000000 +0200
-@@ -25,7 +25,7 @@
- * kgdb usage notes:
- * -----------------
- *
-- * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be
-+ * If you select CONFIG_ETRAX_KGDB in the configuration, the kernel will be
- * built with different gcc flags: "-g" is added to get debug infos, and
- * "-fomit-frame-pointer" is omitted to make debugging easier. Since the
- * resulting kernel will be quite big (approx. > 7 MB), it will be stripped
-@@ -118,7 +118,7 @@
- * call to kgdb_init() is necessary in order to allow any breakpoints
- * or error conditions to be properly intercepted and reported to gdb.
- * Two, a breakpoint needs to be generated to begin communication. This
-- * is most easily accomplished by a call to breakpoint().
-+ * is most easily accomplished by a call to breakpoint().
- *
- * The following gdb commands are supported:
- *
-@@ -382,8 +382,8 @@
- int getDebugChar(void);
-
- #ifdef CONFIG_ETRAXFS_SIM
--int getDebugChar(void)
--{
-+int getDebugChar(void)
-+{
- return socketread();
- }
- #endif
-@@ -490,7 +490,7 @@
-
- /********************************** Breakpoint *******************************/
- /* Use an internal stack in the breakpoint and interrupt response routines.
-- FIXME: How do we know the size of this stack is enough?
-+ FIXME: How do we know the size of this stack is enough?
- Global so it can be reached from assembler code. */
- #define INTERNAL_STACK_SIZE 1024
- char internal_stack[INTERNAL_STACK_SIZE];
-@@ -511,7 +511,7 @@
- gdb_cris_strcpy(char *s1, const char *s2)
- {
- char *s = s1;
--
-+
- for (s = s1; (*s++ = *s2++) != '\0'; )
- ;
- return s1;
-@@ -522,7 +522,7 @@
- gdb_cris_strlen(const char *s)
- {
- const char *sc;
--
-+
- for (sc = s; *sc != '\0'; sc++)
- ;
- return (sc - s);
-@@ -534,7 +534,7 @@
- {
- const unsigned char uc = c;
- const unsigned char *su;
--
-+
- for (su = s; 0 < n; ++su, --n)
- if (*su == uc)
- return (void *)su;
-@@ -549,15 +549,15 @@
- char *s1;
- char *sd;
- int x = 0;
--
-+
- for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
- x = x * base + (sd - hexchars);
--
-+
- if (endptr) {
- /* Unconverted suffix is stored in endptr unless endptr is NULL. */
- *endptr = s1;
- }
--
-+
- return x;
- }
-
-@@ -629,7 +629,7 @@
- } else if (regno == PID) {
- /* 32-bit register. */
- *valptr = *(unsigned int *)((char *)&reg.pid);
--
-+
- } else if (regno == SRS) {
- /* 8-bit register. */
- *valptr = (unsigned int)(*(unsigned char *)((char *)&reg.srs));
-@@ -726,7 +726,7 @@
- *buf++ = highhex (ch);
- *buf++ = lowhex (ch);
- }
--
-+
- /* Terminate properly. */
- *buf = '\0';
- return buf;
-@@ -804,7 +804,7 @@
- continue;
-
- buffer[count] = 0;
--
-+
- if (ch == '#') {
- xmitcsum = hex(getDebugChar()) << 4;
- xmitcsum += hex(getDebugChar());
-@@ -836,7 +836,7 @@
- int checksum;
- int runlen;
- int encode;
--
-+
- do {
- char *src = buffer;
- putDebugChar('$');
-@@ -905,42 +905,42 @@
- {
- char *ptr = output_buffer;
- unsigned int reg_cont;
--
-+
- /* Send trap type (converted to signal) */
-
-- *ptr++ = 'T';
-+ *ptr++ = 'T';
- *ptr++ = highhex(sigval);
- *ptr++ = lowhex(sigval);
-
- if (((reg.exs & 0xff00) >> 8) == 0xc) {
--
-+
- /* Some kind of hardware watchpoint triggered. Find which one
- and determine its type (read/write/access). */
- int S, bp, trig_bits = 0, rw_bits = 0;
- int trig_mask = 0;
- unsigned int *bp_d_regs = &sreg.s3_3;
- /* In a lot of cases, the stopped data address will simply be EDA.
-- In some cases, we adjust it to match the watched data range.
-+ In some cases, we adjust it to match the watched data range.
- (We don't want to change the actual EDA though). */
- unsigned int stopped_data_address;
- /* The S field of EXS. */
- S = (reg.exs & 0xffff0000) >> 16;
--
-+
- if (S & 1) {
- /* Instruction watchpoint. */
- /* FIXME: Check against, and possibly adjust reported EDA. */
- } else {
- /* Data watchpoint. Find the one that triggered. */
- for (bp = 0; bp < 6; bp++) {
--
-+
- /* Dx_RD, Dx_WR in the S field of EXS for this BP. */
- int bitpos_trig = 1 + bp * 2;
- /* Dx_BPRD, Dx_BPWR in BP_CTRL for this BP. */
- int bitpos_config = 2 + bp * 4;
--
-+
- /* Get read/write trig bits for this BP. */
- trig_bits = (S & (3 << bitpos_trig)) >> bitpos_trig;
--
-+
- /* Read/write config bits for this BP. */
- rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config;
- if (trig_bits) {
-@@ -949,11 +949,11 @@
- if ((rw_bits == 0x1 && trig_bits != 0x1) ||
- (rw_bits == 0x2 && trig_bits != 0x2))
- panic("Invalid r/w trigging for this BP");
--
-+
- /* Mark this BP as trigged for future reference. */
- trig_mask |= (1 << bp);
--
-- if (reg.eda >= bp_d_regs[bp * 2] &&
-+
-+ if (reg.eda >= bp_d_regs[bp * 2] &&
- reg.eda <= bp_d_regs[bp * 2 + 1]) {
- /* EDA withing range for this BP; it must be the one
- we're looking for. */
-@@ -972,7 +972,7 @@
-
- /* Read/write config bits for this BP (needed later). */
- rw_bits = (sreg.s0_3 & (3 << bitpos_config)) >> bitpos_config;
--
-+
- if (trig_mask & (1 << bp)) {
- /* EDA within 31 bytes of the configured start address? */
- if (reg.eda + 31 >= bp_d_regs[bp * 2]) {
-@@ -987,12 +987,12 @@
- }
- }
- }
--
-+
- /* No match yet? */
- BUG_ON(bp >= 6);
- /* Note that we report the type according to what the BP is configured
- for (otherwise we'd never report an 'awatch'), not according to how
-- it trigged. We did check that the trigged bits match what the BP is
-+ it trigged. We did check that the trigged bits match what the BP is
- configured for though. */
- if (rw_bits == 0x1) {
- /* read */
-@@ -1110,12 +1110,12 @@
-
- if (sigval == SIGTRAP) {
- /* Break 8, single step or hardware breakpoint exception. */
--
-+
- /* Check IDX field of EXS. */
- if (((reg.exs & 0xff00) >> 8) == 0x18) {
-
- /* Break 8. */
--
-+
- /* Static (compiled) breakpoints must return to the next instruction
- in order to avoid infinite loops (default value of ERP). Dynamic
- (gdb-invoked) must subtract the size of the break instruction from
-@@ -1132,7 +1132,7 @@
- reg.pc -= 2;
- }
- }
--
-+
- } else if (((reg.exs & 0xff00) >> 8) == 0x3) {
- /* Single step. */
- /* Don't fiddle with S1. */
-@@ -1190,10 +1190,10 @@
- unsigned int *bp_d_regs = &sreg.s3_3;
-
- /* The watchpoint allocation scheme is the simplest possible.
-- For example, if a region is watched for read and
-+ For example, if a region is watched for read and
- a write watch is requested, a new watchpoint will
- be used. Also, if a watch for a region that is already
-- covered by one or more existing watchpoints, a new
-+ covered by one or more existing watchpoints, a new
- watchpoint will be used. */
-
- /* First, find a free data watchpoint. */
-@@ -1205,13 +1205,13 @@
- break;
- }
- }
--
-+
- if (bp > 5) {
- /* We're out of watchpoints. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- return;
- }
--
-+
- /* Configure the control register first. */
- if (type == '3' || type == '4') {
- /* Trigger on read. */
-@@ -1221,11 +1221,11 @@
- /* Trigger on write. */
- sreg.s0_3 |= (2 << (2 + bp * 4));
- }
--
-+
- /* Ugly pointer arithmetics to configure the watched range. */
- bp_d_regs[bp * 2] = addr;
- bp_d_regs[bp * 2 + 1] = (addr + len - 1);
-- }
-+ }
-
- /* Set the S1 flag to enable watchpoints. */
- reg.ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
-@@ -1258,7 +1258,7 @@
- /* Not in use. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- return;
-- }
-+ }
- /* Deconfigure. */
- sreg.s1_3 = 0;
- sreg.s2_3 = 0;
-@@ -1268,8 +1268,8 @@
- unsigned int *bp_d_regs = &sreg.s3_3;
- /* Try to find a watchpoint that is configured for the
- specified range, then check that read/write also matches. */
--
-- /* Ugly pointer arithmetic, since I cannot rely on a
-+
-+ /* Ugly pointer arithmetic, since I cannot rely on a
- single switch (addr) as there may be several watchpoints with
- the same start address for example. */
-
-@@ -1279,7 +1279,7 @@
- /* Matching range. */
- int bitpos = 2 + bp * 4;
- int rw_bits;
--
-+
- /* Read/write bits for this BP. */
- rw_bits = (sreg.s0_3 & (0x3 << bitpos)) >> bitpos;
-
-@@ -1347,7 +1347,7 @@
- (char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
- 16 * sizeof(unsigned int));
- break;
-- }
-+ }
- case 'G':
- /* Write registers. GXX..XX
- Each byte of register data is described by two hex digits.
-@@ -1357,11 +1357,11 @@
- hex2mem((char *)&reg, &input_buffer[1], sizeof(registers));
- /* Support registers. */
- hex2mem((char *)&sreg + (reg.srs * 16 * sizeof(unsigned int)),
-- &input_buffer[1] + sizeof(registers),
-+ &input_buffer[1] + sizeof(registers),
- 16 * sizeof(unsigned int));
- gdb_cris_strcpy(output_buffer, "OK");
- break;
--
-+
- case 'P':
- /* Write register. Pn...=r...
- Write register n..., hex value without 0x, with value r...,
-@@ -1393,7 +1393,7 @@
- }
- }
- break;
--
-+
- case 'm':
- /* Read from memory. mAA..AA,LLLL
- AA..AA is the address and LLLL is the length.
-@@ -1416,7 +1416,7 @@
- mem2hex(output_buffer, addr, len);
- }
- break;
--
-+
- case 'X':
- /* Write to memory. XAA..AA,LLLL:XX..XX
- AA..AA is the start address, LLLL is the number of bytes, and
-@@ -1448,7 +1448,7 @@
- }
- }
- break;
--
-+
- case 'c':
- /* Continue execution. cAA..AA
- AA..AA is the address where execution is resumed. If AA..AA is
-@@ -1472,15 +1472,15 @@
- if ((sreg.s0_3 & 0x3fff) == 0) {
- reg.ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
- }
--
-+
- return;
--
-+
- case 's':
- /* Step. sAA..AA
- AA..AA is the address where execution is resumed. If AA..AA is
- omitted, resume at the present address. Success: return to the
- executing thread. Failure: will never know. */
--
-+
- if (input_buffer[1] != '\0') {
- /* FIXME: Doesn't handle address argument. */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
-@@ -1497,7 +1497,7 @@
- return;
-
- case 'Z':
--
-+
- /* Insert breakpoint or watchpoint, Ztype,addr,length.
- Remote protocol says: A remote target shall return an empty string
- for an unrecognized breakpoint or watchpoint packet type. */
-@@ -1522,7 +1522,7 @@
- int addr = gdb_cris_strtol(&input_buffer[3], &lenptr, 16);
- int len = gdb_cris_strtol(lenptr + 1, &dataptr, 16);
- char type = input_buffer[1];
--
-+
- remove_watchpoint(type, addr, len);
- break;
- }
-@@ -1537,14 +1537,14 @@
- output_buffer[2] = lowhex(sigval);
- output_buffer[3] = 0;
- break;
--
-+
- case 'D':
- /* Detach from host. D
- Success: OK, and return to the executing thread.
- Failure: will never know */
- putpacket("OK");
- return;
--
-+
- case 'k':
- case 'r':
- /* kill request or reset request.
-@@ -1552,7 +1552,7 @@
- Failure: will never know. */
- kill_restart();
- break;
--
-+
- case 'C':
- case 'S':
- case '!':
-@@ -1570,7 +1570,7 @@
- and ignored (below)? */
- gdb_cris_strcpy(output_buffer, error_message[E04]);
- break;
--
-+
- default:
- /* The stub should ignore other request and send an empty
- response ($#<checksum>). This way we can extend the protocol and GDB
-@@ -1587,7 +1587,7 @@
- {
- reg_intr_vect_rw_mask intr_mask;
- reg_ser_rw_intr_mask ser_intr_mask;
--
-+
- /* Configure the kgdb serial port. */
- #if defined(CONFIG_ETRAX_KGDB_PORT0)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
-@@ -1597,9 +1597,9 @@
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser0 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
--
-+
- ser_intr_mask = REG_RD(ser, regi_ser0, rw_intr_mask);
-- ser_intr_mask.data_avail = regk_ser_yes;
-+ ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser0, rw_intr_mask, ser_intr_mask);
- #elif defined(CONFIG_ETRAX_KGDB_PORT1)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
-@@ -1609,9 +1609,9 @@
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser1 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
--
-+
- ser_intr_mask = REG_RD(ser, regi_ser1, rw_intr_mask);
-- ser_intr_mask.data_avail = regk_ser_yes;
-+ ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser1, rw_intr_mask, ser_intr_mask);
- #elif defined(CONFIG_ETRAX_KGDB_PORT2)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
-@@ -1621,9 +1621,9 @@
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.ser2 = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
--
-+
- ser_intr_mask = REG_RD(ser, regi_ser2, rw_intr_mask);
-- ser_intr_mask.data_avail = regk_ser_yes;
-+ ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser2, rw_intr_mask, ser_intr_mask);
- #elif defined(CONFIG_ETRAX_KGDB_PORT3)
- /* Note: no shortcut registered (not handled by multiple_interrupt).
-@@ -1635,7 +1635,7 @@
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
-
- ser_intr_mask = REG_RD(ser, regi_ser3, rw_intr_mask);
-- ser_intr_mask.data_avail = regk_ser_yes;
-+ ser_intr_mask.dav = regk_ser_yes;
- REG_WR(ser, regi_ser3, rw_intr_mask, ser_intr_mask);
- #endif
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb_asm.S linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb_asm.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/kgdb_asm.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/kgdb_asm.S 2006-10-13 14:43:13.000000000 +0200
-@@ -11,7 +11,7 @@
- .globl kgdb_handle_exception
-
- kgdb_handle_exception:
--
-+
- ;; Create a register image of the caller.
- ;;
- ;; First of all, save the ACR on the stack since we need it for address calculations.
-@@ -262,7 +262,7 @@
- ;; Nothing in S15, bank 3
- clear.d [$acr]
- addq 4, $acr
--
-+
- ;; Check what got us here: get IDX field of EXS.
- move $exs, $r10
- and.d 0xff00, $r10
-@@ -307,7 +307,7 @@
- handle_comm:
- move.d internal_stack+1020, $sp ; Use the internal stack which grows upwards
- jsr handle_exception ; Interactive routine
-- nop
-+ nop
-
- ;;
- ;; Return to the caller
-@@ -345,7 +345,7 @@
- ;; Nothing in S6 - S7, bank 0.
- addq 4, $acr
- addq 4, $acr
--
-+
- move.d [$acr], $r0
- move $r0, $s8
- addq 4, $acr
-@@ -507,7 +507,7 @@
- addq 8, $acr
-
- ;; Skip BZ, VR.
-- addq 2, $acr
-+ addq 2, $acr
-
- move [$acr], $pid ; Restore PID
- addq 4, $acr
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/pinmux.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/pinmux.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/pinmux.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/pinmux.c 2006-08-11 10:32:21.000000000 +0200
-@@ -1,7 +1,7 @@
--/*
-+/*
- * Allocator for I/O pins. All pins are allocated to GPIO at bootup.
- * Unassigned pins and GPIO pins can be allocated to a fixed interface
-- * or the I/O processor instead.
-+ * or the I/O processor instead.
- *
- * Copyright (c) 2004 Axis Communications AB.
- */
-@@ -33,9 +33,10 @@
-
- if (!initialized) {
- reg_pinmux_rw_pa pa = REG_RD(pinmux, regi_pinmux, rw_pa);
-+ REG_WR_INT(pinmux, regi_pinmux, rw_hwprot, 0);
- initialized = 1;
-- pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
-- pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
-+ pa.pa0 = pa.pa1 = pa.pa2 = pa.pa3 =
-+ pa.pa4 = pa.pa5 = pa.pa6 = pa.pa7 = regk_pinmux_yes;
- REG_WR(pinmux, regi_pinmux, rw_pa, pa);
- crisv32_pinmux_alloc(PORT_B, 0, PORT_PINS - 1, pinmux_gpio);
- crisv32_pinmux_alloc(PORT_C, 0, PORT_PINS - 1, pinmux_gpio);
-@@ -46,124 +47,137 @@
- return 0;
- }
-
--int
--crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
-+/*
-+ * must be called with the pinmux_lock held.
-+ */
-+static int __crisv32_pinmux_alloc(int port, int first_pin, int last_pin,
-+ enum pin_mode mode)
- {
- int i;
-- unsigned long flags;
-
-- crisv32_pinmux_init();
--
-- if (port > PORTS)
-+ if (port >= PORTS ||
-+ first_pin < 0 || last_pin >= PORT_PINS || last_pin < first_pin)
- return -EINVAL;
--
-- spin_lock_irqsave(&pinmux_lock, flags);
--
-- for (i = first_pin; i <= last_pin; i++)
-+
-+ for (i = first_pin; i <= last_pin; i++)
- {
-- if ((pins[port][i] != pinmux_none) && (pins[port][i] != pinmux_gpio) &&
-- (pins[port][i] != mode))
-+ if ((pins[port][i] != pinmux_none)
-+ && (pins[port][i] != pinmux_gpio)
-+ && (pins[port][i] != mode))
- {
-- spin_unlock_irqrestore(&pinmux_lock, flags);
- #ifdef DEBUG
- panic("Pinmux alloc failed!\n");
- #endif
- return -EPERM;
- }
- }
--
-+
- for (i = first_pin; i <= last_pin; i++)
- pins[port][i] = mode;
-
- crisv32_pinmux_set(port);
--
-- spin_unlock_irqrestore(&pinmux_lock, flags);
--
- return 0;
- }
-
- int
-+crisv32_pinmux_alloc(int port, int first_pin, int last_pin, enum pin_mode mode)
-+{
-+ int r;
-+ unsigned long flags;
-+
-+ crisv32_pinmux_init();
-+
-+ spin_lock_irqsave(&pinmux_lock, flags);
-+ r = __crisv32_pinmux_alloc(port, first_pin, last_pin, mode);
-+ spin_unlock_irqrestore(&pinmux_lock, flags);
-+ return r;
-+}
-+
-+int
- crisv32_pinmux_alloc_fixed(enum fixed_function function)
- {
- int ret = -EINVAL;
- char saved[sizeof pins];
- unsigned long flags;
--
-+ reg_pinmux_rw_hwprot hwprot;
-+
-+ crisv32_pinmux_init();
-+
- spin_lock_irqsave(&pinmux_lock, flags);
-
- /* Save internal data for recovery */
- memcpy(saved, pins, sizeof pins);
--
-- reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
--
-+
-+ hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-+
- switch(function)
- {
- case pinmux_ser1:
-- ret = crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 4, 7, pinmux_fixed);
- hwprot.ser1 = regk_pinmux_yes;
- break;
- case pinmux_ser2:
-- ret = crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 8, 11, pinmux_fixed);
- hwprot.ser2 = regk_pinmux_yes;
- break;
- case pinmux_ser3:
-- ret = crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 12, 15, pinmux_fixed);
- hwprot.ser3 = regk_pinmux_yes;
- break;
- case pinmux_sser0:
-- ret = crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
-- ret |= crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 0, 3, pinmux_fixed);
-+ ret |= __crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
- hwprot.sser0 = regk_pinmux_yes;
- break;
- case pinmux_sser1:
-- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
- hwprot.sser1 = regk_pinmux_yes;
- break;
- case pinmux_ata0:
-- ret = crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
-- ret |= crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_D, 5, 7, pinmux_fixed);
-+ ret |= __crisv32_pinmux_alloc(PORT_D, 15, 17, pinmux_fixed);
- hwprot.ata0 = regk_pinmux_yes;
- break;
- case pinmux_ata1:
-- ret = crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-- ret |= crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_D, 0, 4, pinmux_fixed);
-+ ret |= __crisv32_pinmux_alloc(PORT_E, 17, 17, pinmux_fixed);
- hwprot.ata1 = regk_pinmux_yes;
- break;
- case pinmux_ata2:
-- ret = crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
-- ret |= crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 11, 15, pinmux_fixed);
-+ ret |= __crisv32_pinmux_alloc(PORT_E, 3, 3, pinmux_fixed);
- hwprot.ata2 = regk_pinmux_yes;
- break;
- case pinmux_ata3:
-- ret = crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
-- ret |= crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 8, 10, pinmux_fixed);
-+ ret |= __crisv32_pinmux_alloc(PORT_C, 0, 2, pinmux_fixed);
- hwprot.ata2 = regk_pinmux_yes;
- break;
- case pinmux_ata:
-- ret = crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
-- ret |= crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_B, 0, 15, pinmux_fixed);
-+ ret |= __crisv32_pinmux_alloc(PORT_D, 8, 15, pinmux_fixed);
- hwprot.ata = regk_pinmux_yes;
- break;
- case pinmux_eth1:
-- ret = crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_E, 0, 17, pinmux_fixed);
- hwprot.eth1 = regk_pinmux_yes;
- hwprot.eth1_mgm = regk_pinmux_yes;
- break;
- case pinmux_timer:
-- ret = crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
-+ ret = __crisv32_pinmux_alloc(PORT_C, 16, 16, pinmux_fixed);
- hwprot.timer = regk_pinmux_yes;
- spin_unlock_irqrestore(&pinmux_lock, flags);
- return ret;
- }
--
-+
- if (!ret)
- REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
- else
- memcpy(pins, saved, sizeof pins);
--
-- spin_unlock_irqrestore(&pinmux_lock, flags);
--
-- return ret;
-+
-+ spin_unlock_irqrestore(&pinmux_lock, flags);
-+
-+ return ret;
- }
-
- void
-@@ -189,33 +203,126 @@
- #endif
- }
-
--int
--crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
-+/*
-+ * must be called with the pinmux_lock held.
-+ */
-+static int __crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
- {
- int i;
-+
-+ if (port > PORTS)
-+ return -EINVAL;
-+
-+ for (i = first_pin; i <= last_pin; i++)
-+ pins[port][i] = pinmux_none;
-+
-+ crisv32_pinmux_set(port);
-+
-+ return 0;
-+}
-+
-+int crisv32_pinmux_dealloc(int port, int first_pin, int last_pin)
-+{
-+ int r;
- unsigned long flags;
-
- crisv32_pinmux_init();
-+
-+ spin_lock_irqsave(&pinmux_lock, flags);
-+ r = __crisv32_pinmux_dealloc(port, first_pin, last_pin);
-+ spin_unlock_irqrestore(&pinmux_lock, flags);
-+ return r;
-+}
-
-- if (port > PORTS)
-- return -EINVAL;
-+int
-+crisv32_pinmux_dealloc_fixed(enum fixed_function function)
-+{
-+ int ret = -EINVAL;
-+ char saved[sizeof pins];
-+ unsigned long flags;
-
- spin_lock_irqsave(&pinmux_lock, flags);
-
-- for (i = first_pin; i <= last_pin; i++)
-- pins[port][i] = pinmux_none;
-+ /* Save internal data for recovery */
-+ memcpy(saved, pins, sizeof pins);
-+
-+ reg_pinmux_rw_hwprot hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
-+
-+ switch(function)
-+ {
-+ case pinmux_ser1:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 4, 7);
-+ hwprot.ser1 = regk_pinmux_no;
-+ break;
-+ case pinmux_ser2:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 8, 11);
-+ hwprot.ser2 = regk_pinmux_no;
-+ break;
-+ case pinmux_ser3:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 12, 15);
-+ hwprot.ser3 = regk_pinmux_no;
-+ break;
-+ case pinmux_sser0:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 0, 3);
-+ ret |= __crisv32_pinmux_dealloc(PORT_C, 16, 16);
-+ hwprot.sser0 = regk_pinmux_no;
-+ break;
-+ case pinmux_sser1:
-+ ret = __crisv32_pinmux_dealloc(PORT_D, 0, 4);
-+ hwprot.sser1 = regk_pinmux_no;
-+ break;
-+ case pinmux_ata0:
-+ ret = __crisv32_pinmux_dealloc(PORT_D, 5, 7);
-+ ret |= __crisv32_pinmux_dealloc(PORT_D, 15, 17);
-+ hwprot.ata0 = regk_pinmux_no;
-+ break;
-+ case pinmux_ata1:
-+ ret = __crisv32_pinmux_dealloc(PORT_D, 0, 4);
-+ ret |= __crisv32_pinmux_dealloc(PORT_E, 17, 17);
-+ hwprot.ata1 = regk_pinmux_no;
-+ break;
-+ case pinmux_ata2:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 11, 15);
-+ ret |= __crisv32_pinmux_dealloc(PORT_E, 3, 3);
-+ hwprot.ata2 = regk_pinmux_no;
-+ break;
-+ case pinmux_ata3:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 8, 10);
-+ ret |= __crisv32_pinmux_dealloc(PORT_C, 0, 2);
-+ hwprot.ata2 = regk_pinmux_no;
-+ break;
-+ case pinmux_ata:
-+ ret = __crisv32_pinmux_dealloc(PORT_B, 0, 15);
-+ ret |= __crisv32_pinmux_dealloc(PORT_D, 8, 15);
-+ hwprot.ata = regk_pinmux_no;
-+ break;
-+ case pinmux_eth1:
-+ ret = __crisv32_pinmux_dealloc(PORT_E, 0, 17);
-+ hwprot.eth1 = regk_pinmux_no;
-+ hwprot.eth1_mgm = regk_pinmux_no;
-+ break;
-+ case pinmux_timer:
-+ ret = __crisv32_pinmux_dealloc(PORT_C, 16, 16);
-+ hwprot.timer = regk_pinmux_no;
-+ spin_unlock_irqrestore(&pinmux_lock, flags);
-+ return ret;
-+ }
-+
-+ if (!ret)
-+ REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
-+ else
-+ memcpy(pins, saved, sizeof pins);
-
-- crisv32_pinmux_set(port);
- spin_unlock_irqrestore(&pinmux_lock, flags);
--
-- return 0;
-+
-+ return ret;
- }
-
- void
- crisv32_pinmux_dump(void)
- {
- int i, j;
--
-+
- crisv32_pinmux_init();
-
- for (i = 0; i < PORTS; i++)
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/process.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/process.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/process.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/process.c 2006-10-13 14:43:13.000000000 +0200
-@@ -74,9 +74,9 @@
- #else
- {
- reg_timer_rw_wd_ctrl wd_ctrl = {0};
--
-+
- stop_watchdog();
--
-+
- wd_ctrl.key = 16; /* Arbitrary key. */
- wd_ctrl.cnt = 1; /* Minimum time. */
- wd_ctrl.cmd = regk_timer_start;
-@@ -141,7 +141,7 @@
- {
- struct pt_regs *childregs;
- struct switch_stack *swstack;
--
-+
- /*
- * Put the pt_regs structure at the end of the new kernel stack page and
- * fix it up. Note: the task_struct doubles as the kernel stack for the
-@@ -152,7 +152,7 @@
- p->set_child_tid = p->clear_child_tid = NULL;
- childregs->r10 = 0; /* Child returns 0 after a fork/clone. */
-
-- /* Set a new TLS ?
-+ /* Set a new TLS ?
- * The TLS is in $mof beacuse it is the 5th argument to sys_clone.
- */
- if (p->mm && (clone_flags & CLONE_SETTLS)) {
-@@ -165,20 +165,20 @@
- /* Paramater to ret_from_sys_call. 0 is don't restart the syscall. */
- swstack->r9 = 0;
-
-- /*
-+ /*
- * We want to return into ret_from_sys_call after the _resume.
- * ret_from_fork will call ret_from_sys_call.
- */
- swstack->return_ip = (unsigned long) ret_from_fork;
--
-+
- /* Fix the user-mode and kernel-mode stackpointer. */
-- p->thread.usp = usp;
-+ p->thread.usp = usp;
- p->thread.ksp = (unsigned long) swstack;
-
- return 0;
- }
-
--/*
-+/*
- * Be aware of the "magic" 7th argument in the four system-calls below.
- * They need the latest stackframe, which is put as the 7th argument by
- * entry.S. The previous arguments are dummies or actually used, but need
-@@ -200,7 +200,7 @@
-
- /* FIXME: Is parent_tid/child_tid really third/fourth argument? Update lib? */
- asmlinkage int
--sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid,
-+sys_clone(unsigned long newusp, unsigned long flags, int *parent_tid, int *child_tid,
- unsigned long tls, long srp, struct pt_regs *regs)
- {
- if (!newusp)
-@@ -209,11 +209,11 @@
- return do_fork(flags, newusp, regs, 0, parent_tid, child_tid);
- }
-
--/*
-+/*
- * vfork is a system call in i386 because of register-pressure - maybe
- * we can remove it and handle it in libc but we put it here until then.
- */
--asmlinkage int
-+asmlinkage int
- sys_vfork(long r10, long r11, long r12, long r13, long mof, long srp,
- struct pt_regs *regs)
- {
-@@ -222,7 +222,7 @@
-
- /* sys_execve() executes a new program. */
- asmlinkage int
--sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
-+sys_execve(const char *fname, char **argv, char **envp, long r13, long mof, long srp,
- struct pt_regs *regs)
- {
- int error;
-@@ -254,13 +254,13 @@
- unsigned long usp = rdusp();
- printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
- regs->erp, regs->srp, regs->ccs, usp, regs->mof);
--
-+
- printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
- regs->r0, regs->r1, regs->r2, regs->r3);
--
-+
- printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
- regs->r4, regs->r5, regs->r6, regs->r7);
--
-+
- printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
- regs->r8, regs->r9, regs->r10, regs->r11);
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/ptrace.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/ptrace.c 2006-03-22 10:56:56.000000000 +0100
-@@ -20,7 +20,7 @@
- #include <asm/processor.h>
- #include <asm/arch/hwregs/supp_reg.h>
-
--/*
-+/*
- * Determines which bits in CCS the user has access to.
- * 1 = access, 0 = no access.
- */
-@@ -84,7 +84,7 @@
- *
- * Make sure the single step bit is not set.
- */
--void
-+void
- ptrace_disable(struct task_struct *child)
- {
- unsigned long tmp;
-@@ -105,7 +105,7 @@
- unsigned long __user *datap = (unsigned long __user *)data;
-
- switch (request) {
-- /* Read word at location address. */
-+ /* Read word at location address. */
- case PTRACE_PEEKTEXT:
- case PTRACE_PEEKDATA: {
- unsigned long tmp;
-@@ -122,11 +122,11 @@
- tmp = *(unsigned long*)addr;
- } else {
- copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
--
-+
- if (copied != sizeof(tmp))
- break;
- }
--
-+
- ret = put_user(tmp,datap);
- break;
- }
-@@ -143,18 +143,18 @@
- ret = put_user(tmp, datap);
- break;
- }
--
-+
- /* Write the word at location address. */
- case PTRACE_POKETEXT:
- case PTRACE_POKEDATA:
- ret = 0;
--
-+
- if (access_process_vm(child, addr, &data, sizeof(data), 1) == sizeof(data))
- break;
--
-+
- ret = -EIO;
- break;
--
-+
- /* Write the word at location address in the USER area. */
- case PTRACE_POKEUSR:
- ret = -EIO;
-@@ -178,10 +178,10 @@
- case PTRACE_SYSCALL:
- case PTRACE_CONT:
- ret = -EIO;
--
-+
- if (!valid_signal(data))
- break;
--
-+
- /* Continue means no single-step. */
- put_reg(child, PT_SPC, 0);
-
-@@ -198,27 +198,27 @@
- else {
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- }
--
-+
- child->exit_code = data;
--
-+
- /* TODO: make sure any pending breakpoint is killed */
- wake_up_process(child);
- ret = 0;
--
-+
- break;
--
-+
- /* Make the child exit by sending it a sigkill. */
- case PTRACE_KILL:
- ret = 0;
--
-+
- if (child->exit_state == EXIT_ZOMBIE)
- break;
--
-+
- child->exit_code = SIGKILL;
--
-+
- /* Deconfigure single-step and h/w bp. */
- ptrace_disable(child);
--
-+
- /* TODO: make sure any pending breakpoint is killed */
- wake_up_process(child);
- break;
-@@ -227,7 +227,7 @@
- case PTRACE_SINGLESTEP: {
- unsigned long tmp;
- ret = -EIO;
--
-+
- /* Set up SPC if not set already (in which case we have
- no other choice but to trust it). */
- if (!get_reg(child, PT_SPC)) {
-@@ -240,7 +240,7 @@
-
- if (!valid_signal(data))
- break;
--
-+
- clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
- /* TODO: set some clever breakpoint mechanism... */
-@@ -259,15 +259,15 @@
- case PTRACE_GETREGS: {
- int i;
- unsigned long tmp;
--
-+
- for (i = 0; i <= PT_MAX; i++) {
- tmp = get_reg(child, i);
--
-+
- if (put_user(tmp, datap)) {
- ret = -EFAULT;
- goto out_tsk;
- }
--
-+
- datap++;
- }
-
-@@ -279,22 +279,22 @@
- case PTRACE_SETREGS: {
- int i;
- unsigned long tmp;
--
-+
- for (i = 0; i <= PT_MAX; i++) {
- if (get_user(tmp, datap)) {
- ret = -EFAULT;
- goto out_tsk;
- }
--
-+
- if (i == PT_CCS) {
- tmp &= CCS_MASK;
- tmp |= get_reg(child, PT_CCS) & ~CCS_MASK;
- }
--
-+
- put_reg(child, i, tmp);
- datap++;
- }
--
-+
- ret = 0;
- break;
- }
-@@ -304,6 +304,7 @@
- break;
- }
-
-+out_tsk:
- return ret;
- }
-
-@@ -311,15 +312,15 @@
- {
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
--
-+
- if (!(current->ptrace & PT_PTRACED))
- return;
--
-+
- /* the 0x80 provides a way for the tracing parent to distinguish
- between a syscall stop and SIGTRAP delivery */
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
--
-+
- /*
- * This isn't the same as continuing with a signal, but it will do for
- * normal use.
-@@ -338,7 +339,7 @@
- int copied;
- int opsize = 0;
-
-- /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */
-+ /* Read the opcode at pc (do what PTRACE_PEEKTEXT would do). */
- copied = access_process_vm(child, pc, &opcode, sizeof(opcode), 0);
- if (copied != sizeof(opcode))
- return 0;
-@@ -361,7 +362,7 @@
- opsize = 6;
- break;
- default:
-- panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n",
-+ panic("ERROR: Couldn't find size of opcode 0x%lx at 0x%lx\n",
- opcode, pc);
- }
-
-@@ -378,7 +379,7 @@
- /* Delay slot bit set. Report as stopped on proper
- instruction. */
- if (spc) {
-- /* Rely on SPC if set. FIXME: We might want to check
-+ /* Rely on SPC if set. FIXME: We might want to check
- that EXS indicates we stopped due to a single-step
- exception. */
- pc = spc;
-@@ -422,7 +423,7 @@
- register int old_srs;
-
- #ifdef CONFIG_ETRAX_KGDB
-- /* Ignore write, but pretend it was ok if value is 0
-+ /* Ignore write, but pretend it was ok if value is 0
- (we don't want POKEUSR/SETREGS failing unnessecarily). */
- return (data == 0) ? ret : -1;
- #endif
-@@ -431,7 +432,7 @@
- if (!bp_owner)
- bp_owner = pid;
- else if (bp_owner != pid) {
-- /* Ignore write, but pretend it was ok if value is 0
-+ /* Ignore write, but pretend it was ok if value is 0
- (we don't want POKEUSR/SETREGS failing unnessecarily). */
- return (data == 0) ? ret : -1;
- }
-@@ -440,7 +441,7 @@
- SPEC_REG_RD(SPEC_REG_SRS, old_srs);
- /* Switch to BP bank. */
- SUPP_BANK_SEL(BANK_BP);
--
-+
- switch (regno - PT_BP) {
- case 0:
- SUPP_REG_WR(0, data); break;
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/setup.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/setup.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/setup.c 2006-10-13 14:43:13.000000000 +0200
-@@ -40,12 +40,12 @@
-
- {"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
- | HAS_MMU | HAS_MMU_BUG},
--
-+
- {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB
- | HAS_MMU},
--
-+
- {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU},
--
-+
- {"Unknown", 0, 0, 0}
- };
-
-@@ -67,7 +67,7 @@
- #endif
-
- revision = rdvr();
--
-+
- for (i = 0; i < entries; i++) {
- if (cpinfo[i].rev == revision) {
- info = &cpinfo[i];
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/signal.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/signal.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/signal.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/signal.c 2006-03-22 10:56:56.000000000 +0100
-@@ -50,7 +50,7 @@
- unsigned char retcode[8]; /* Trampoline code. */
- };
-
--int do_signal(int restart, sigset_t *oldset, struct pt_regs *regs);
-+void do_signal(int restart, struct pt_regs *regs);
- void keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
- struct pt_regs *regs);
- /*
-@@ -61,74 +61,16 @@
- sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
- long srp, struct pt_regs *regs)
- {
-- sigset_t saveset;
--
- mask &= _BLOCKABLE;
--
- spin_lock_irq(&current->sighand->siglock);
--
-- saveset = current->blocked;
--
-+ current->saved_sigmask = current->blocked;
- siginitset(&current->blocked, mask);
--
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
--
-- regs->r10 = -EINTR;
--
-- while (1) {
-- current->state = TASK_INTERRUPTIBLE;
-- schedule();
--
-- if (do_signal(0, &saveset, regs)) {
-- /*
-- * This point is reached twice: once to call
-- * the signal handler, then again to return
-- * from the sigsuspend system call. When
-- * calling the signal handler, R10 hold the
-- * signal number as set by do_signal(). The
-- * sigsuspend call will always return with
-- * the restored value above; -EINTR.
-- */
-- return regs->r10;
-- }
-- }
--}
--
--/* Define some dummy arguments to be able to reach the regs argument. */
--int
--sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, long r12, long r13,
-- long mof, long srp, struct pt_regs *regs)
--{
-- sigset_t saveset;
-- sigset_t newset;
--
-- if (sigsetsize != sizeof(sigset_t))
-- return -EINVAL;
--
-- if (copy_from_user(&newset, unewset, sizeof(newset)))
-- return -EFAULT;
--
-- sigdelsetmask(&newset, ~_BLOCKABLE);
-- spin_lock_irq(&current->sighand->siglock);
--
-- saveset = current->blocked;
-- current->blocked = newset;
--
-- recalc_sigpending();
-- spin_unlock_irq(&current->sighand->siglock);
--
-- regs->r10 = -EINTR;
--
-- while (1) {
-- current->state = TASK_INTERRUPTIBLE;
-- schedule();
--
-- if (do_signal(0, &saveset, regs)) {
-- /* See comment in function above. */
-- return regs->r10;
-- }
-- }
-+ current->state = TASK_INTERRUPTIBLE;
-+ schedule();
-+ set_thread_flag(TIF_RESTORE_SIGMASK);
-+ return -ERESTARTNOHAND;
- }
-
- int
-@@ -263,7 +205,7 @@
- unsigned long oldccs = regs->ccs;
-
- frame = (struct rt_signal_frame *) rdusp();
--
-+
- /*
- * Since the signal is stacked on a dword boundary, the frame
- * should be dword aligned here as well. It it's not, then the
-@@ -285,7 +227,7 @@
-
- recalc_sigpending();
- spin_unlock_irq(&current->sighand->siglock);
--
-+
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
- goto badframe;
-
-@@ -311,7 +253,7 @@
-
- err = 0;
- usp = rdusp();
--
-+
- /*
- * Copy the registers. They are located first in sc, so it's
- * possible to use sc directly.
-@@ -351,7 +293,7 @@
- * which performs the syscall sigreturn(), or a provided user-mode
- * trampoline.
- */
--static void
-+static int
- setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
- struct pt_regs * regs)
- {
-@@ -388,7 +330,7 @@
- /* Trampoline - the desired return ip is in the signal return page. */
- return_ip = cris_signal_return_page;
-
-- /*
-+ /*
- * This is movu.w __NR_sigreturn, r9; break 13;
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
-@@ -402,7 +344,7 @@
-
- if (err)
- goto give_sigsegv;
--
-+
- /*
- * Set up registers for signal handler.
- *
-@@ -417,16 +359,17 @@
- /* Actually move the USP to reflect the stacked frame. */
- wrusp((unsigned long)frame);
-
-- return;
-+ return 0;
-
- give_sigsegv:
- if (sig == SIGSEGV)
- ka->sa.sa_handler = SIG_DFL;
--
-+
- force_sig(SIGSEGV, current);
-+ return -EFAULT;
- }
-
--static void
-+static int
- setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
- {
-@@ -441,11 +384,11 @@
- goto give_sigsegv;
-
- /* TODO: what is the current->exec_domain stuff and invmap ? */
--
-+
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, info);
--
-+
- if (err)
- goto give_sigsegv;
-
-@@ -467,7 +410,7 @@
- /* Trampoline - the desired return ip is in the signal return page. */
- return_ip = cris_signal_return_page + 6;
-
-- /*
-+ /*
- * This is movu.w __NR_rt_sigreturn, r9; break 13;
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
-@@ -478,7 +421,7 @@
-
- err |= __put_user(__NR_rt_sigreturn,
- (short __user*)(frame->retcode+2));
--
-+
- err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
- }
-
-@@ -503,21 +446,24 @@
- /* Actually move the usp to reflect the stacked frame. */
- wrusp((unsigned long)frame);
-
-- return;
-+ return 0;
-
- give_sigsegv:
- if (sig == SIGSEGV)
- ka->sa.sa_handler = SIG_DFL;
--
-+
- force_sig(SIGSEGV, current);
-+ return -EFAULT;
- }
-
- /* Invoke a singal handler to, well, handle the signal. */
--static inline void
-+static inline int
- handle_signal(int canrestart, unsigned long sig,
- siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs * regs)
- {
-+ int ret;
-+
- /* Check if this got called from a system call. */
- if (canrestart) {
- /* If so, check system call restarting. */
-@@ -561,19 +507,23 @@
-
- /* Set up the stack frame. */
- if (ka->sa.sa_flags & SA_SIGINFO)
-- setup_rt_frame(sig, ka, info, oldset, regs);
-+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
- else
-- setup_frame(sig, ka, oldset, regs);
-+ ret = setup_frame(sig, ka, oldset, regs);
-
- if (ka->sa.sa_flags & SA_ONESHOT)
- ka->sa.sa_handler = SIG_DFL;
-
-- spin_lock_irq(&current->sighand->siglock);
-- sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-- if (!(ka->sa.sa_flags & SA_NODEFER))
-- sigaddset(&current->blocked,sig);
-- recalc_sigpending();
-- spin_unlock_irq(&current->sighand->siglock);
-+ if (ret == 0) {
-+ spin_lock_irq(&current->sighand->siglock);
-+ sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-+ if (!(ka->sa.sa_flags & SA_NODEFER))
-+ sigaddset(&current->blocked,sig);
-+ recalc_sigpending();
-+ spin_unlock_irq(&current->sighand->siglock);
-+ }
-+
-+ return ret;
- }
-
- /*
-@@ -587,12 +537,13 @@
- * we can use user_mode(regs) to see if we came directly from kernel or user
- * mode below.
- */
--int
--do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs)
-+void
-+do_signal(int canrestart, struct pt_regs *regs)
- {
- int signr;
- siginfo_t info;
- struct k_sigaction ka;
-+ sigset_t *oldset;
-
- /*
- * The common case should go fast, which is why this point is
-@@ -600,17 +551,27 @@
- * without doing anything.
- */
- if (!user_mode(regs))
-- return 1;
-+ return;
-
-- if (!oldset)
-+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
-+ oldset = &current->saved_sigmask;
-+ else
- oldset = &current->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
--
-+
- if (signr > 0) {
-- /* Deliver the signal. */
-- handle_signal(canrestart, signr, &info, &ka, oldset, regs);
-- return 1;
-+ /* Whee! Actually deliver the signal. */
-+ if (handle_signal(canrestart, signr, &info, &ka, oldset, regs)) {
-+ /* a signal was successfully delivered; the saved
-+ * sigmask will have been stored in the signal frame,
-+ * and will be restored by sigreturn, so we can simply
-+ * clear the TIF_RESTORE_SIGMASK flag */
-+ if (test_thread_flag(TIF_RESTORE_SIGMASK))
-+ clear_thread_flag(TIF_RESTORE_SIGMASK);
-+ }
-+
-+ return;
- }
-
- /* Got here from a system call? */
-@@ -621,14 +582,19 @@
- regs->r10 == -ERESTARTNOINTR) {
- RESTART_CRIS_SYS(regs);
- }
--
-+
- if (regs->r10 == -ERESTART_RESTARTBLOCK){
- regs->r10 = __NR_restart_syscall;
- regs->erp -= 2;
- }
- }
--
-- return 0;
-+
-+ /* if there's no signal to deliver, we just put the saved sigmask
-+ * back */
-+ if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-+ clear_thread_flag(TIF_RESTORE_SIGMASK);
-+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-+ }
- }
-
- asmlinkage void
-@@ -651,7 +617,7 @@
- sys_kill(ti->task->pid, sig);
- }
-
--void
-+void
- keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
- struct pt_regs *regs)
- {
-@@ -666,7 +632,7 @@
- regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
- /* Assume the SPC is valid and interesting. */
- regs->spc = oldspc;
--
-+
- } else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) {
- /* If a h/w bp was set in the signal handler we need
- to keep the S flag. */
-@@ -679,7 +645,7 @@
- have forgotten all about it. */
- regs->spc = 0;
- regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
-- }
-+ }
- }
-
- /* Set up the trampolines on the signal return page. */
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/smp.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/smp.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/smp.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/smp.c 2007-01-09 10:29:19.000000000 +0100
-@@ -20,6 +20,7 @@
- #define IPI_SCHEDULE 1
- #define IPI_CALL 2
- #define IPI_FLUSH_TLB 4
-+#define IPI_BOOT 8
-
- #define FLUSH_ALL (void*)0xffffffff
-
-@@ -30,6 +31,8 @@
- cpumask_t cpu_online_map = CPU_MASK_NONE;
- EXPORT_SYMBOL(cpu_online_map);
- cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
-+cpumask_t cpu_possible_map;
-+EXPORT_SYMBOL(cpu_possible_map);
- EXPORT_SYMBOL(phys_cpu_present_map);
-
- /* Variables used during SMP boot */
-@@ -55,7 +58,7 @@
- extern int setup_irq(int, struct irqaction *);
-
- /* Mode registers */
--static unsigned long irq_regs[NR_CPUS] =
-+static unsigned long irq_regs[NR_CPUS] =
- {
- regi_irq,
- regi_irq2
-@@ -97,6 +100,7 @@
-
- cpu_set(0, cpu_online_map);
- cpu_set(0, phys_cpu_present_map);
-+ cpu_set(0, cpu_possible_map);
- }
-
- void __init smp_cpus_done(unsigned int max_cpus)
-@@ -109,6 +113,7 @@
- {
- unsigned timeout;
- struct task_struct *idle;
-+ cpumask_t cpu_mask = CPU_MASK_NONE;
-
- idle = fork_idle(cpuid);
- if (IS_ERR(idle))
-@@ -120,6 +125,12 @@
- smp_init_current_idle_thread = task_thread_info(idle);
- cpu_now_booting = cpuid;
-
-+ /* Kick it */
-+ cpu_set(cpuid, cpu_online_map);
-+ cpu_set(cpuid, cpu_mask);
-+ send_ipi(IPI_BOOT, 0, cpu_mask);
-+ cpu_clear(cpuid, cpu_online_map);
-+
- /* Wait for CPU to come online */
- for (timeout = 0; timeout < 10000; timeout++) {
- if(cpu_online(cpuid)) {
-@@ -142,7 +153,7 @@
- * specific stuff such as the local timer and the MMU. */
- void __init smp_callin(void)
- {
-- extern void cpu_idle(void);
-+ extern void cpu_idle(void);
-
- int cpu = cpu_now_booting;
- reg_intr_vect_rw_mask vect_mask = {0};
-@@ -190,8 +201,8 @@
-
- /* cache_decay_ticks is used by the scheduler to decide if a process
- * is "hot" on one CPU. A higher value means a higher penalty to move
-- * a process to another CPU. Our cache is rather small so we report
-- * 1 tick.
-+ * a process to another CPU. Our cache is rather small so we report
-+ * 1 tick.
- */
- unsigned long cache_decay_ticks = 1;
-
-@@ -205,14 +216,14 @@
- {
- cpumask_t cpu_mask = CPU_MASK_NONE;
- cpu_set(cpu, cpu_mask);
-- send_ipi(IPI_SCHEDULE, 0, cpu_mask);
-+ send_ipi(IPI_SCHEDULE, 0, cpu_mask);
- }
-
- /* TLB flushing
- *
- * Flush needs to be done on the local CPU and on any other CPU that
- * may have the same mapping. The mm->cpu_vm_mask is used to keep track
-- * of which CPUs that a specific process has been executed on.
-+ * of which CPUs that a specific process has been executed on.
- */
- void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned long addr)
- {
-@@ -244,7 +255,7 @@
- cpu_set(smp_processor_id(), mm->cpu_vm_mask);
- }
-
--void flush_tlb_page(struct vm_area_struct *vma,
-+void flush_tlb_page(struct vm_area_struct *vma,
- unsigned long addr)
- {
- __flush_tlb_page(vma, addr);
-@@ -252,8 +263,8 @@
- }
-
- /* Inter processor interrupts
-- *
-- * The IPIs are used for:
-+ *
-+ * The IPIs are used for:
- * * Force a schedule on a CPU
- * * FLush TLB on other CPUs
- * * Call a function on other CPUs
-@@ -341,7 +352,7 @@
- else if (flush_vma == FLUSH_ALL)
- __flush_tlb_mm(flush_mm);
- else
-- __flush_tlb_page(flush_vma, flush_addr);
-+ __flush_tlb_page(flush_vma, flush_addr);
- }
-
- ipi.vector = 0;
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/time.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/time.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/time.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/time.c 2007-01-09 10:29:19.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: time.c,v 1.19 2005/04/29 05:40:09 starvik Exp $
-+/* $Id: time.c,v 1.25 2007/01/09 09:29:19 starvik Exp $
- *
- * linux/arch/cris/arch-v32/kernel/time.c
- *
-@@ -14,12 +14,14 @@
- #include <linux/sched.h>
- #include <linux/init.h>
- #include <linux/threads.h>
-+#include <linux/cpufreq.h>
- #include <asm/types.h>
- #include <asm/signal.h>
- #include <asm/io.h>
- #include <asm/delay.h>
- #include <asm/rtc.h>
- #include <asm/irq.h>
-+#include <asm/irq_regs.h>
-
- #include <asm/arch/hwregs/reg_map.h>
- #include <asm/arch/hwregs/reg_rdwr.h>
-@@ -31,7 +33,7 @@
- #define ETRAX_WD_HZ 763 /* watchdog counts at 763 Hz */
- #define ETRAX_WD_CNT ((2*ETRAX_WD_HZ)/HZ + 1) /* Number of 763 counts before watchdog bites */
-
--unsigned long timer_regs[NR_CPUS] =
-+unsigned long timer_regs[NR_CPUS] =
- {
- regi_timer,
- #ifdef CONFIG_SMP
-@@ -44,6 +46,15 @@
- extern int setup_irq(int, struct irqaction *);
- extern int have_rtc;
-
-+#ifdef CONFIG_CPU_FREQ
-+static int
-+cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, void *data);
-+
-+static struct notifier_block cris_time_freq_notifier_block = {
-+ .notifier_call = cris_time_freq_notifier
-+};
-+#endif
-+
- unsigned long get_ns_in_jiffie(void)
- {
- reg_timer_r_tmr0_data data;
-@@ -63,7 +74,7 @@
- static unsigned long jiffies_p = 0;
-
- /*
-- * cache volatile jiffies temporarily; we have IRQs turned off.
-+ * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
-
-@@ -82,7 +93,7 @@
- */
- if( jiffies_t == jiffies_p ) {
- if( count > count_p ) {
-- /* Timer wrapped, use new count and prescale
-+ /* Timer wrapped, use new count and prescale
- * increase the time corresponding to one jiffie
- */
- usec_count = 1000000/HZ;
-@@ -101,7 +112,7 @@
- * The watchdog timer is an 8-bit timer with a configurable start value.
- * Once started the whatchdog counts downwards with a frequency of 763 Hz
- * (100/131072 MHz). When the watchdog counts down to 1, it generates an
-- * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
-+ * NMI (Non Maskable Interrupt), and when it counts down to 0, it resets the
- * chip.
- */
- /* This gives us 1.3 ms to do something useful when the NMI comes */
-@@ -124,7 +135,7 @@
- {
- #if defined(CONFIG_ETRAX_WATCHDOG)
- reg_timer_rw_wd_ctrl wd_ctrl = { 0 };
--
-+
- /* only keep watchdog happy as long as we have memory left! */
- if(nr_free_pages() > WATCHDOG_MIN_FREE_PAGES) {
- /* reset the watchdog with the inverse of the old key */
-@@ -139,7 +150,7 @@
-
- /* stop the watchdog - we still need the correct key */
-
--void
-+void
- stop_watchdog(void)
- {
- #if defined(CONFIG_ETRAX_WATCHDOG)
-@@ -149,7 +160,7 @@
- wd_ctrl.cmd = regk_timer_stop;
- wd_ctrl.key = watchdog_key;
- REG_WR(timer, regi_timer, rw_wd_ctrl, wd_ctrl);
--#endif
-+#endif
- }
-
- extern void show_registers(struct pt_regs *regs);
-@@ -160,7 +171,8 @@
- #if defined(CONFIG_ETRAX_WATCHDOG)
- extern int cause_of_death;
-
-- raw_printk("Watchdog bite\n");
-+ oops_in_progress = 1;
-+ printk("Watchdog bite\n");
-
- /* Check if forced restart or unexpected watchdog */
- if (cause_of_death == 0xbedead) {
-@@ -169,8 +181,9 @@
-
- /* Unexpected watchdog, stop the watchdog and dump registers*/
- stop_watchdog();
-- raw_printk("Oops: bitten by watchdog\n");
-- show_registers(regs);
-+ printk("Oops: bitten by watchdog\n");
-+ show_registers(regs);
-+ oops_in_progress = 0;
- #ifndef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
- reset_watchdog();
- #endif
-@@ -191,8 +204,9 @@
- extern void cris_do_profile(struct pt_regs *regs);
-
- static inline irqreturn_t
--timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+timer_interrupt(int irq, void *dev_id)
- {
-+ struct pt_regs* regs = get_irq_regs();
- int cpu = smp_processor_id();
- reg_timer_r_masked_intr masked_intr;
- reg_timer_rw_ack_intr ack_intr = { 0 };
-@@ -226,7 +240,7 @@
- * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- *
-- * The division here is not time critical since it will run once in
-+ * The division here is not time critical since it will run once in
- * 11 minutes
- */
- if ((time_status & STA_UNSYNC) == 0 &&
-@@ -246,7 +260,7 @@
- */
-
- static struct irqaction irq_timer = {
-- .mask = timer_interrupt,
-+ .handler = timer_interrupt,
- .flags = IRQF_SHARED | IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "timer"
-@@ -262,7 +276,7 @@
-
- /* Setup the etrax timers
- * Base frequency is 100MHz, divider 1000000 -> 100 HZ
-- * We use timer0, so timer1 is free.
-+ * We use timer0, so timer1 is free.
- * The trig timer is used by the fasttimer API if enabled.
- */
-
-@@ -284,11 +298,11 @@
- {
- reg_intr_vect_rw_mask intr_mask;
-
-- /* probe for the RTC and read it if it exists
-- * Before the RTC can be probed the loops_per_usec variable needs
-- * to be initialized to make usleep work. A better value for
-- * loops_per_usec is calculated by the kernel later once the
-- * clock has started.
-+ /* probe for the RTC and read it if it exists
-+ * Before the RTC can be probed the loops_per_usec variable needs
-+ * to be initialized to make usleep work. A better value for
-+ * loops_per_usec is calculated by the kernel later once the
-+ * clock has started.
- */
- loops_per_usec = 50;
-
-@@ -297,7 +311,7 @@
- xtime.tv_sec = 0;
- xtime.tv_nsec = 0;
- have_rtc = 0;
-- } else {
-+ } else {
- /* get the current time */
- have_rtc = 1;
- update_xtime_from_cmos();
-@@ -316,9 +330,9 @@
- intr_mask = REG_RD(intr_vect, regi_irq, rw_mask);
- intr_mask.timer = 1;
- REG_WR(intr_vect, regi_irq, rw_mask, intr_mask);
--
-+
- /* now actually register the timer irq handler that calls timer_interrupt() */
--
-+
- setup_irq(TIMER_INTR_VECT, &irq_timer);
-
- /* enable watchdog if we should use one */
-@@ -330,10 +344,7 @@
- /* If we use the hardware watchdog, we want to trap it as an NMI
- and dump registers before it resets us. For this to happen, we
- must set the "m" NMI enable flag (which once set, is unset only
-- when an NMI is taken).
--
-- The same goes for the external NMI, but that doesn't have any
-- driver or infrastructure support yet. */
-+ when an NMI is taken). */
- {
- unsigned long flags;
- local_save_flags(flags);
-@@ -341,4 +352,27 @@
- local_irq_restore(flags);
- }
- #endif
-+
-+#ifdef CONFIG_CPU_FREQ
-+ cpufreq_register_notifier(&cris_time_freq_notifier_block,
-+ CPUFREQ_TRANSITION_NOTIFIER);
-+#endif
-+}
-+
-+#ifdef CONFIG_CPU_FREQ
-+static int
-+cris_time_freq_notifier(struct notifier_block *nb, unsigned long val, void *data)
-+{
-+ struct cpufreq_freqs *freqs = data;
-+ if (val == CPUFREQ_POSTCHANGE) {
-+ reg_timer_r_tmr0_data data;
-+ reg_timer_rw_tmr0_div div = (freqs->new * 500) / HZ;
-+ do
-+ {
-+ data = REG_RD(timer, timer_regs[freqs->cpu], r_tmr0_data);
-+ } while (data > 20);
-+ REG_WR(timer, timer_regs[freqs->cpu], rw_tmr0_div, div);
-+ }
-+ return 0;
- }
-+#endif
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/traps.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/traps.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/traps.c 2006-12-11 14:04:24.000000000 +0100
-@@ -1,50 +1,43 @@
- /*
-- * Copyright (C) 2003, Axis Communications AB.
-+ * Copyright (C) 2003-2006, Axis Communications AB.
- */
-
- #include <linux/ptrace.h>
- #include <asm/uaccess.h>
--
- #include <asm/arch/hwregs/supp_reg.h>
--
--extern void reset_watchdog(void);
--extern void stop_watchdog(void);
--
--extern int raw_printk(const char *fmt, ...);
-+#include <asm/arch/hwregs/intr_vect_defs.h>
-
- void
- show_registers(struct pt_regs *regs)
- {
- /*
- * It's possible to use either the USP register or current->thread.usp.
-- * USP might not correspond to the current proccess for all cases this
-+ * USP might not correspond to the current process for all cases this
- * function is called, and current->thread.usp isn't up to date for the
-- * current proccess. Experience shows that using USP is the way to go.
-+ * current process. Experience shows that using USP is the way to go.
- */
-- unsigned long usp;
-+ unsigned long usp = rdusp();
- unsigned long d_mmu_cause;
- unsigned long i_mmu_cause;
-
-- usp = rdusp();
-+ printk("CPU: %d\n", smp_processor_id());
-
-- raw_printk("CPU: %d\n", smp_processor_id());
-+ printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
-+ regs->erp, regs->srp, regs->ccs, usp, regs->mof);
-
-- raw_printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n",
-- regs->erp, regs->srp, regs->ccs, usp, regs->mof);
-+ printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
-+ regs->r0, regs->r1, regs->r2, regs->r3);
-
-- raw_printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n",
-- regs->r0, regs->r1, regs->r2, regs->r3);
-+ printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
-+ regs->r4, regs->r5, regs->r6, regs->r7);
-
-- raw_printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
-- regs->r4, regs->r5, regs->r6, regs->r7);
-+ printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
-+ regs->r8, regs->r9, regs->r10, regs->r11);
-
-- raw_printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
-- regs->r8, regs->r9, regs->r10, regs->r11);
-+ printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
-+ regs->r12, regs->r13, regs->orig_r10, regs->acr);
-
-- raw_printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n",
-- regs->r12, regs->r13, regs->orig_r10, regs->acr);
--
-- raw_printk("sp: %08lx\n", regs);
-+ printk(" sp: %08lx\n", (unsigned long)regs);
-
- SUPP_BANK_SEL(BANK_IM);
- SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause);
-@@ -52,18 +45,20 @@
- SUPP_BANK_SEL(BANK_DM);
- SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause);
-
-- raw_printk(" Data MMU Cause: %08lx\n", d_mmu_cause);
-- raw_printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
-+ printk(" Data MMU Cause: %08lx\n", d_mmu_cause);
-+ printk("Instruction MMU Cause: %08lx\n", i_mmu_cause);
-
-- raw_printk("Process %s (pid: %d, stackpage: %08lx)\n",
-- current->comm, current->pid, (unsigned long) current);
-+ printk("Process %s (pid: %d, stackpage=%08lx)\n",
-+ current->comm, current->pid, (unsigned long)current);
-
-- /* Show additional info if in kernel-mode. */
-+ /*
-+ * When in-kernel, we also print out the stack and code at the
-+ * time of the fault..
-+ */
- if (!user_mode(regs)) {
- int i;
-- unsigned char c;
-
-- show_stack(NULL, (unsigned long *) usp);
-+ show_stack(NULL, (unsigned long *)usp);
-
- /*
- * If the previous stack-dump wasn't a kernel one, dump the
-@@ -72,7 +67,7 @@
- if (usp != 0)
- show_stack(NULL, NULL);
-
-- raw_printk("\nCode: ");
-+ printk("\nCode: ");
-
- if (regs->erp < PAGE_OFFSET)
- goto bad_value;
-@@ -84,76 +79,65 @@
- * instruction decoding should be in sync at the interesting
- * point, but small enough to fit on a row. The regs->erp
- * location is pointed out in a ksymoops-friendly way by
-- * wrapping the byte for that address in parenthesis.
-+ * wrapping the byte for that address in parenthesises.
- */
- for (i = -12; i < 12; i++) {
-- if (__get_user(c, &((unsigned char *) regs->erp)[i])) {
-+ unsigned char c;
-+
-+ if (__get_user(c, &((unsigned char *)regs->erp)[i])) {
- bad_value:
-- raw_printk(" Bad IP value.");
-+ printk(" Bad IP value.");
- break;
- }
-
- if (i == 0)
-- raw_printk("(%02x) ", c);
-+ printk("(%02x) ", c);
- else
-- raw_printk("%02x ", c);
-+ printk("%02x ", c);
- }
--
-- raw_printk("\n");
-+ printk("\n");
- }
- }
-
--/*
-- * This gets called from entry.S when the watchdog has bitten. Show something
-- * similiar to an Oops dump, and if the kernel if configured to be a nice doggy;
-- * halt instead of reboot.
-- */
- void
--watchdog_bite_hook(struct pt_regs *regs)
-+arch_enable_nmi(void)
- {
--#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-- local_irq_disable();
-- stop_watchdog();
-- show_registers(regs);
--
-- while (1)
-- ; /* Do nothing. */
--#else
-- show_registers(regs);
--#endif
-+ unsigned long flags;
-+
-+ local_save_flags(flags);
-+ flags |= (1 << 30); /* NMI M flag is at bit 30 */
-+ local_irq_restore(flags);
- }
-
--/* This is normally the Oops function. */
--void
--die_if_kernel(const char *str, struct pt_regs *regs, long err)
-+extern void (*nmi_handler)(struct pt_regs*);
-+void handle_nmi(struct pt_regs* regs)
- {
-- if (user_mode(regs))
-- return;
-+ reg_intr_vect_r_nmi r;
-
--#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-- /*
-- * This printout might take too long and could trigger
-- * the watchdog normally. If NICE_DOGGY is set, simply
-- * stop the watchdog during the printout.
-- */
-- stop_watchdog();
--#endif
--
-- raw_printk("%s: %04lx\n", str, err & 0xffff);
-+ if (nmi_handler)
-+ nmi_handler(regs);
-
-- show_registers(regs);
--
--#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-- reset_watchdog();
--#endif
--
-- do_exit(SIGSEGV);
-+ /* Wait until nmi is no longer active. */
-+ do {
-+ r = REG_RD(intr_vect, regi_irq, r_nmi);
-+ } while (r.ext == regk_intr_vect_on);
- }
-
--void arch_enable_nmi(void)
-+#ifdef CONFIG_DEBUG_BUGVERBOSE
-+void
-+handle_BUG(struct pt_regs *regs)
- {
-- unsigned long flags;
-- local_save_flags(flags);
-- flags |= (1<<30); /* NMI M flag is at bit 30 */
-- local_irq_restore(flags);
-+ struct bug_frame f;
-+ unsigned char c;
-+ unsigned long erp = regs->erp;
-+
-+ if (__copy_from_user(&f, (const void __user *)(erp - 8), sizeof f))
-+ return;
-+ if (f.prefix != BUG_PREFIX || f.magic != BUG_MAGIC)
-+ return;
-+ if (__get_user(c, f.filename))
-+ f.filename = "<bad filename>";
-+
-+ printk("kernel BUG at %s:%d!\n", f.filename, f.line);
- }
-+#endif
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.c linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.c 1970-01-01 01:00:00.000000000 +0100
-@@ -1,96 +0,0 @@
--// $Id: vcs_hook.c,v 1.2 2003/08/12 12:01:06 starvik Exp $
--//
--// Call simulator hook. This is the part running in the
--// simulated program.
--//
--
--#include "vcs_hook.h"
--#include <stdarg.h>
--#include <asm/arch-v32/hwregs/reg_map.h>
--#include <asm/arch-v32/hwregs/intr_vect_defs.h>
--
--#define HOOK_TRIG_ADDR 0xb7000000 /* hook cvlog model reg address */
--#define HOOK_MEM_BASE_ADDR 0xa0000000 /* csp4 (shared mem) base addr */
--
--#define HOOK_DATA(offset) ((unsigned*) HOOK_MEM_BASE_ADDR)[offset]
--#define VHOOK_DATA(offset) ((volatile unsigned*) HOOK_MEM_BASE_ADDR)[offset]
--#define HOOK_TRIG(funcid) do { *((unsigned *) HOOK_TRIG_ADDR) = funcid; } while(0)
--#define HOOK_DATA_BYTE(offset) ((unsigned char*) HOOK_MEM_BASE_ADDR)[offset]
--
--
--// ------------------------------------------------------------------ hook_call
--int hook_call( unsigned id, unsigned pcnt, ...) {
-- va_list ap;
-- unsigned i;
-- unsigned ret;
--#ifdef USING_SOS
-- PREEMPT_OFF_SAVE();
--#endif
--
-- // pass parameters
-- HOOK_DATA(0) = id;
--
-- /* Have to make hook_print_str a special case since we call with a
-- parameter of byte type. Should perhaps be a separate
-- hook_call. */
--
-- if (id == hook_print_str) {
-- int i;
-- char *str;
--
-- HOOK_DATA(1) = pcnt;
--
-- va_start(ap, pcnt);
-- str = (char*)va_arg(ap,unsigned);
--
-- for (i=0; i!=pcnt; i++) {
-- HOOK_DATA_BYTE(8+i) = str[i];
-- }
-- HOOK_DATA_BYTE(8+i) = 0; /* null byte */
-- }
-- else {
-- va_start(ap, pcnt);
-- for( i = 1; i <= pcnt; i++ ) HOOK_DATA(i) = va_arg(ap,unsigned);
-- va_end(ap);
-- }
--
-- // read from mem to make sure data has propagated to memory before trigging
-- *((volatile unsigned*) HOOK_MEM_BASE_ADDR);
--
-- // trigger hook
-- HOOK_TRIG(id);
--
-- // wait for call to finish
-- while( VHOOK_DATA(0) > 0 ) {}
--
-- // extract return value
--
-- ret = VHOOK_DATA(1);
--
--#ifdef USING_SOS
-- PREEMPT_RESTORE();
--#endif
-- return ret;
--}
--
--unsigned
--hook_buf(unsigned i)
--{
-- return (HOOK_DATA(i));
--}
--
--void print_str( const char *str ) {
-- int i;
-- for (i=1; str[i]; i++); /* find null at end of string */
-- hook_call(hook_print_str, i, str);
--}
--
--// --------------------------------------------------------------- CPU_KICK_DOG
--void CPU_KICK_DOG(void) {
-- (void) hook_call( hook_kick_dog, 0 );
--}
--
--// ------------------------------------------------------- CPU_WATCHDOG_TIMEOUT
--void CPU_WATCHDOG_TIMEOUT( unsigned t ) {
-- (void) hook_call( hook_dog_timeout, 1, t );
--}
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.h linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.h
---- linux-2.6.19.2.old/arch/cris/arch-v32/kernel/vcs_hook.h 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/kernel/vcs_hook.h 1970-01-01 01:00:00.000000000 +0100
-@@ -1,42 +0,0 @@
--// $Id: vcs_hook.h,v 1.1 2003/08/12 12:01:06 starvik Exp $
--//
--// Call simulator hook functions
--
--#ifndef HOOK_H
--#define HOOK_H
--
--int hook_call( unsigned id, unsigned pcnt, ...);
--
--enum hook_ids {
-- hook_debug_on = 1,
-- hook_debug_off,
-- hook_stop_sim_ok,
-- hook_stop_sim_fail,
-- hook_alloc_shared,
-- hook_ptr_shared,
-- hook_free_shared,
-- hook_file2shared,
-- hook_cmp_shared,
-- hook_print_params,
-- hook_sim_time,
-- hook_stop_sim,
-- hook_kick_dog,
-- hook_dog_timeout,
-- hook_rand,
-- hook_srand,
-- hook_rand_range,
-- hook_print_str,
-- hook_print_hex,
-- hook_cmp_offset_shared,
-- hook_fill_random_shared,
-- hook_alloc_random_data,
-- hook_calloc_random_data,
-- hook_print_int,
-- hook_print_uint,
-- hook_fputc,
-- hook_init_fd,
-- hook_sbrk
--
--};
--
--#endif
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/Makefile linux-2.6.19.2.dev/arch/cris/arch-v32/lib/Makefile
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/Makefile 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/Makefile 2006-10-11 19:29:20.000000000 +0200
-@@ -2,5 +2,5 @@
- # Makefile for Etrax-specific library files..
- #
-
--lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o
-+lib-y = checksum.o checksumcopy.o string.o usercopy.o memset.o csumcpfruser.o spinlock.o delay.o
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksum.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksum.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksum.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksum.S 2005-08-15 15:53:12.000000000 +0200
-@@ -7,15 +7,15 @@
-
- .globl csum_partial
- csum_partial:
--
-+
- ;; r10 - src
- ;; r11 - length
- ;; r12 - checksum
-
- ;; check for breakeven length between movem and normal word looping versions
-- ;; we also do _NOT_ want to compute a checksum over more than the
-+ ;; we also do _NOT_ want to compute a checksum over more than the
- ;; actual length when length < 40
--
-+
- cmpu.w 80,$r11
- blo _word_loop
- nop
-@@ -24,17 +24,17 @@
- ;; this overhead is why we have a check above for breakeven length
- ;; only r0 - r8 have to be saved, the other ones are clobber-able
- ;; according to the ABI
--
-+
- subq 9*4,$sp
- subq 10*4,$r11 ; update length for the first loop
- movem $r8,[$sp]
--
-+
- ;; do a movem checksum
-
- _mloop: movem [$r10+],$r9 ; read 10 longwords
-
- ;; perform dword checksumming on the 10 longwords
--
-+
- add.d $r0,$r12
- addc $r1,$r12
- addc $r2,$r12
-@@ -48,9 +48,8 @@
-
- ;; fold the carry into the checksum, to avoid having to loop the carry
- ;; back into the top
--
-+
- addc 0,$r12
-- addc 0,$r12 ; do it again, since we might have generated a carry
-
- subq 10*4,$r11
- bge _mloop
-@@ -68,34 +67,30 @@
-
- ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below.
- ;; r9 and r13 can be used as temporaries.
--
-+
- moveq -1,$r9 ; put 0xffff in r9, faster than move.d 0xffff,r9
- lsrq 16,$r9
--
-+
- move.d $r12,$r13
- lsrq 16,$r13 ; r13 = checksum >> 16
- and.d $r9,$r12 ; checksum = checksum & 0xffff
- add.d $r13,$r12 ; checksum += r13
-- move.d $r12,$r13 ; do the same again, maybe we got a carry last add
-- lsrq 16,$r13
-- and.d $r9,$r12
-- add.d $r13,$r12
-
- _no_fold:
- cmpq 2,$r11
- blt _no_words
- nop
--
-+
- ;; checksum the rest of the words
--
-+
- subq 2,$r11
--
-+
- _wloop: subq 2,$r11
- bge _wloop
- addu.w [$r10+],$r12
--
-+
- addq 2,$r11
--
-+
- _no_words:
- ;; see if we have one odd byte more
- cmpq 1,$r11
-@@ -104,7 +99,7 @@
- ret
- move.d $r12,$r10
-
--_do_byte:
-+_do_byte:
- ;; copy and checksum the last byte
- addu.b [$r10],$r12
- ret
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksumcopy.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksumcopy.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/checksumcopy.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/checksumcopy.S 2005-08-15 15:53:12.000000000 +0200
-@@ -3,23 +3,23 @@
- * Copyright (c) 1998, 2001, 2003 Axis Communications AB
- *
- * Authors: Bjorn Wesen
-- *
-+ *
- * csum_partial_copy_nocheck(const char *src, char *dst,
- * int len, unsigned int sum)
- */
-
- .globl csum_partial_copy_nocheck
--csum_partial_copy_nocheck:
--
-+csum_partial_copy_nocheck:
-+
- ;; r10 - src
- ;; r11 - dst
- ;; r12 - length
- ;; r13 - checksum
-
- ;; check for breakeven length between movem and normal word looping versions
-- ;; we also do _NOT_ want to compute a checksum over more than the
-+ ;; we also do _NOT_ want to compute a checksum over more than the
- ;; actual length when length < 40
--
-+
- cmpu.w 80,$r12
- blo _word_loop
- nop
-@@ -28,19 +28,19 @@
- ;; this overhead is why we have a check above for breakeven length
- ;; only r0 - r8 have to be saved, the other ones are clobber-able
- ;; according to the ABI
--
-+
- subq 9*4,$sp
- subq 10*4,$r12 ; update length for the first loop
- movem $r8,[$sp]
--
-+
- ;; do a movem copy and checksum
--
-+
- 1: ;; A failing userspace access (the read) will have this as PC.
- _mloop: movem [$r10+],$r9 ; read 10 longwords
- movem $r9,[$r11+] ; write 10 longwords
-
- ;; perform dword checksumming on the 10 longwords
--
-+
- add.d $r0,$r13
- addc $r1,$r13
- addc $r2,$r13
-@@ -54,9 +54,8 @@
-
- ;; fold the carry into the checksum, to avoid having to loop the carry
- ;; back into the top
--
-+
- addc 0,$r13
-- addc 0,$r13 ; do it again, since we might have generated a carry
-
- subq 10*4,$r12
- bge _mloop
-@@ -74,34 +73,30 @@
-
- ;; fold 32-bit checksum into a 16-bit checksum, to avoid carries below
- ;; r9 can be used as temporary.
--
-+
- move.d $r13,$r9
- lsrq 16,$r9 ; r0 = checksum >> 16
- and.d 0xffff,$r13 ; checksum = checksum & 0xffff
- add.d $r9,$r13 ; checksum += r0
-- move.d $r13,$r9 ; do the same again, maybe we got a carry last add
-- lsrq 16,$r9
-- and.d 0xffff,$r13
-- add.d $r9,$r13
--
-+
- _no_fold:
- cmpq 2,$r12
- blt _no_words
- nop
--
-+
- ;; copy and checksum the rest of the words
--
-+
- subq 2,$r12
--
-+
- 2: ;; A failing userspace access for the read below will have this as PC.
- _wloop: move.w [$r10+],$r9
- addu.w $r9,$r13
- subq 2,$r12
- bge _wloop
- move.w $r9,[$r11+]
--
-+
- addq 2,$r12
--
-+
- _no_words:
- ;; see if we have one odd byte more
- cmpq 1,$r12
-@@ -110,7 +105,7 @@
- ret
- move.d $r13,$r10
-
--_do_byte:
-+_do_byte:
- ;; copy and checksum the last byte
- 3: ;; A failing userspace access for the read below will have this as PC.
- move.b [$r10],$r9
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/delay.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/delay.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/delay.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/delay.c 2006-10-16 01:08:41.000000000 +0200
-@@ -0,0 +1,28 @@
-+/*
-+ * Precise Delay Loops for ETRAX FS
-+ *
-+ * Copyright (C) 2006 Axis Communications AB.
-+ *
-+ */
-+
-+#include <asm/arch/hwregs/reg_map.h>
-+#include <asm/arch/hwregs/reg_rdwr.h>
-+#include <asm/arch/hwregs/timer_defs.h>
-+#include <linux/types.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+
-+/*
-+ * On ETRAX FS, we can check the free-running read-only 100MHz timer
-+ * getting 32-bit 10ns precision, theoretically good for 42.94967295
-+ * seconds. Unsigned arithmetic and careful expression handles
-+ * wrapping.
-+ */
-+
-+void cris_delay10ns(u32 n10ns)
-+{
-+ u32 t0 = REG_RD(timer, regi_timer, r_time);
-+ while (REG_RD(timer, regi_timer, r_time) - t0 < n10ns)
-+ ;
-+}
-+EXPORT_SYMBOL(cris_delay10ns);
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/dram_init.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/dram_init.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/dram_init.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/dram_init.S 2006-11-28 11:06:19.000000000 +0100
-@@ -1,14 +1,14 @@
--/* $Id: dram_init.S,v 1.4 2005/04/24 18:48:32 starvik Exp $
-- *
-+/* $Id: dram_init.S,v 1.9 2006/11/28 10:06:19 ricardw Exp $
-+ *
- * DRAM/SDRAM initialization - alter with care
- * This file is intended to be included from other assembler files
- *
-- * Note: This file may not modify r8 or r9 because they are used to
-- * carry information from the decompresser to the kernel
-+ * Note: This file may not modify r8 .. r12 because they are used to
-+ * carry information from the decompressor to the kernel
- *
- * Copyright (C) 2000-2003 Axis Communications AB
- *
-- * Authors: Mikael Starvik (starvik@axis.com)
-+ * Authors: Mikael Starvik (starvik@axis.com)
- */
-
- /* Just to be certain the config file is included, we include it here
-@@ -18,13 +18,13 @@
-
- #include <asm/arch/hwregs/asm/reg_map_asm.h>
- #include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
--
-- ;; WARNING! The registers r8 and r9 are used as parameters carrying
-- ;; information from the decompressor (if the kernel was compressed).
-+
-+ ;; WARNING! The registers r8 .. r12 are used as parameters carrying
-+ ;; information from the decompressor (if the kernel was compressed).
- ;; They should not be used in the code below.
-
- ; Refer to BIF MDS for a description of SDRAM initialization
--
-+
- ; Bank configuration
- move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cfg_grp0), $r0
- move.d CONFIG_ETRAX_SDRAM_GRP0_CONFIG, $r1
-@@ -33,7 +33,7 @@
- move.d CONFIG_ETRAX_SDRAM_GRP1_CONFIG, $r1
- move.d $r1, [$r0]
-
-- ; Calculate value of mrs_data
-+ ; Calculate value of mrs_data
- ; CAS latency = 2 && bus_width = 32 => 0x40
- ; CAS latency = 3 && bus_width = 32 => 0x60
- ; CAS latency = 2 && bus_width = 16 => 0x20
-@@ -43,7 +43,7 @@
- move.d CONFIG_ETRAX_SDRAM_COMMAND, $r2
- bne _set_timing
- nop
--
-+
- move.d 0x40, $r4 ; Assume 32 bits and CAS latency = 2
- move.d CONFIG_ETRAX_SDRAM_TIMING, $r1
- and.d 0x07, $r1 ; Get CAS latency
-@@ -51,7 +51,7 @@
- beq _bw_check
- nop
- move.d 0x60, $r4
--
-+
- _bw_check:
- ; Assume that group 0 width is equal to group 1. This assumption
- ; is wrong for a group 1 only hardware (such as the grand old
-@@ -67,23 +67,27 @@
- move.d CONFIG_ETRAX_SDRAM_TIMING, $r1
- and.d ~(3 << reg_bif_core_rw_sdram_timing___ref___lsb), $r1
- move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0
-- move.d $r1, [$r0]
-+ move.d $r1, [$r0]
-+
-+ ; Wait 200us
-+ move.d 10000, $r2
-+1: bne 1b
-+ subq 1, $r2
-
- ; Issue NOP command
- move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_cmd), $r5
- moveq regk_bif_core_nop, $r1
- move.d $r1, [$r5]
--
-+
- ; Wait 200us
- move.d 10000, $r2
- 1: bne 1b
- subq 1, $r2
--
-+
- ; Issue initialization command sequence
-- move.d _sdram_commands_start, $r2
-- and.d 0x000fffff, $r2 ; Make sure commands are read from flash
-- move.d _sdram_commands_end, $r3
-- and.d 0x000fffff, $r3
-+ lapc.d _sdram_commands_start, $r2 ; position-independent
-+ lapc.d _sdram_commands_end, $r3 ; position-independent
-+
- 1: clear.d $r6
- move.b [$r2+], $r6 ; Load command
- or.d $r4, $r6 ; Add calculated mrs
-@@ -100,7 +104,7 @@
- move.d CONFIG_ETRAX_SDRAM_TIMING, $r1
- move.d REG_ADDR(bif_core, regi_bif_core, rw_sdram_timing), $r0
- move.d $r1, [$r0]
--
-+
- ; Initialization finished
- ba _sdram_commands_end
- nop
-@@ -116,4 +120,4 @@
- .byte regk_bif_core_ref ; refresh
- .byte regk_bif_core_ref ; refresh
- .byte regk_bif_core_mrs ; mrs
--_sdram_commands_end:
-+_sdram_commands_end:
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/hw_settings.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/hw_settings.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/hw_settings.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/hw_settings.S 2006-10-13 14:43:15.000000000 +0200
-@@ -1,25 +1,25 @@
- /*
-- * $Id: hw_settings.S,v 1.3 2005/04/24 18:36:57 starvik Exp $
-- *
-+ * $Id: hw_settings.S,v 1.5 2006/10/13 12:43:15 starvik Exp $
-+ *
- * This table is used by some tools to extract hardware parameters.
- * The table should be included in the kernel and the decompressor.
- * Don't forget to update the tools if you change this table.
- *
- * Copyright (C) 2001 Axis Communications AB
- *
-- * Authors: Mikael Starvik (starvik@axis.com)
-+ * Authors: Mikael Starvik (starvik@axis.com)
- */
-
- #include <asm/arch/hwregs/asm/reg_map_asm.h>
- #include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
- #include <asm/arch/hwregs/asm/gio_defs_asm.h>
--
-+
- .ascii "HW_PARAM_MAGIC" ; Magic number
- .dword 0xc0004000 ; Kernel start address
-
- ; Debug port
- #ifdef CONFIG_ETRAX_DEBUG_PORT0
-- .dword 0
-+ .dword 0
- #elif defined(CONFIG_ETRAX_DEBUG_PORT1)
- .dword 1
- #elif defined(CONFIG_ETRAX_DEBUG_PORT2)
-@@ -28,9 +28,9 @@
- .dword 3
- #else
- .dword 4 ; No debug
--#endif
-+#endif
-
-- ; Register values
-+ ; Register values
- .dword REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg)
- .dword CONFIG_ETRAX_MEM_GRP1_CONFIG
- .dword REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg)
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/memset.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/memset.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/memset.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/memset.c 2003-07-02 05:00:14.000000000 +0200
-@@ -66,7 +66,7 @@
-
- {
- register char *dst __asm__ ("r13") = pdst;
--
-+
- /* This is NONPORTABLE, but since this whole routine is */
- /* grossly nonportable that doesn't matter. */
-
-@@ -156,7 +156,7 @@
- }
-
- /* Either we directly starts copying, using dword copying
-- in a loop, or we copy as much as possible with 'movem'
-+ in a loop, or we copy as much as possible with 'movem'
- and then the last block (<44 bytes) is copied here.
- This will work since 'movem' will have updated src,dst,n. */
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/nand_init.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/nand_init.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/nand_init.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/nand_init.S 2007-01-31 16:52:19.000000000 +0100
-@@ -9,14 +9,16 @@
- ##
- ## Some notes about the bug/feature for future reference:
- ## The bootrom copies the first 127 KB from NAND flash to internal
--## memory. The problem is that it does a bytewise copy. NAND flashes
--## does autoincrement on the address so for a 16-bite device each
--## read/write increases the address by two. So the copy loop in the
-+## memory. The problem is that it does a bytewise copy, copying
-+## a single byte from the lowest byte of the bus for each address.
-+## NAND flashes autoincrement on the address so for a 16 bit device
-+## each read/write increases the address by two. So the copy loop in the
- ## bootrom will discard every second byte. This is solved by inserting
--## zeroes in every second byte in the first erase block.
-+## zeroes in every second byte in the first erase block, in order
-+## to get contiguous code.
- ##
- ## The bootrom also incorrectly assumes that it can read the flash
--## linear with only one read command but the flash will actually
-+## linearly with only one read command but the flash will actually
- ## switch between normal area and spare area if you do that so we
- ## can't trust more than the first 256 bytes.
- ##
-@@ -29,14 +31,16 @@
- #include <asm/arch/hwregs/asm/config_defs_asm.h>
-
- ;; There are 8-bit NAND flashes and 16-bit NAND flashes.
--;; We need to treat them slightly different.
--#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
--#define PAGE_SIZE 256
-+;; We need to treat them slightly differently.
-+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2
-+#define PAGE_SIZE_ADDRESSES 256
- #else
--#error 2
--#define PAGE_SIZE 512
-+#define PAGE_SIZE_ADDRESSES 512
- #endif
-+
-+;; Block size for erase
- #define ERASE_BLOCK 16384
-+#define PAGE_SIZE_BYTES 512
-
- ;; GPIO pins connected to NAND flash
- #define CE 4
-@@ -49,6 +53,7 @@
- #define NAND_WR_ADDR 0x94000000
-
- #define READ_CMD 0x00
-+#define RESET_CMD 0xFF
-
- ;; Readability macros
- #define CSP_MASK \
-@@ -58,6 +63,10 @@
- REG_STATE(bif_core, rw_grp3_cfg, gated_csp0, rd) | \
- REG_STATE(bif_core, rw_grp3_cfg, gated_csp1, wr)
-
-+;; Normally we initialize GPIO and bus interfaces.
-+;; This is strictly not necessary; boot ROM does this for us.
-+#define INTERFACE_SETUP (1)
-+
- ;;----------------------------------------------------------------------------
- ;; Macros to set/clear GPIO bits
-
-@@ -71,16 +80,41 @@
- move.d $r9, [$r2]
- .endm
-
-+.macro GPIO_SYNC
-+;; Originally, we read back data written to nand flash in order
-+;; to flush the pipeline. It turned out however, that the real
-+;; culprit was a lack of wait states.
-+;; This macro remains in the code however in case this conclusion
-+;; is wrong too.
-+;;
-+;; move.d [$r2], $r9 ; read back to flush pipeline
-+.endm
-+
- ;;----------------------------------------------------------------------------
-+;; Read value from bus to temporary register to sync with previous write
-+;; This generates no signal to the NAND flash, since only chip select lines are
-+;; pulled out to the chip, and read is not gated with chip select for the write
-+;; area.
-
--nand_boot:
-- ;; Check if nand boot was selected
-- move.d REG_ADDR(config, regi_config, r_bootsel), $r0
-- move.d [$r0], $r0
-- and.d REG_MASK(config, r_bootsel, boot_mode), $r0
-- cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
-- bne normal_boot ; No NAND boot
-- nop
-+.macro BUS_SYNC r
-+ move.b [$r1], \r
-+.endm
-+
-+;;----------------------------------------------------------------------------
-+;; Delay macro
-+;; x = delay = 10*x + 20 ns, e.g. DELAY 25 => 270ns delay, max 63 (650 ns)
-+;;(@200Mc)
-+;; r is temp reg used
-+;; Macro currently not used, save for a rainy day.
-+
-+.macro DELAY x, r
-+ clear.d \r
-+ addq (\x),\r ; addq zero-extends its argument
-+7: bne 7b
-+ subq 1, \r
-+.endm
-+
-+;;----------------------------------------------------------------------------
-
- copy_nand_to_ram:
- ;; copy_nand_to_ram
-@@ -88,7 +122,6 @@
- ;; r10 - destination
- ;; r11 - source offset
- ;; r12 - size
-- ;; r13 - Address to jump to after completion
- ;; Note : r10-r12 are clobbered on return
- ;; Registers used:
- ;; r0 - NAND_RD_ADDR
-@@ -96,83 +129,99 @@
- ;; r2 - reg_gio_rw_pa_dout
- ;; r3 - reg_gio_r_pa_din
- ;; r4 - tmp
-- ;; r5 - byte counter within a page
-- ;; r6 - reg_pinmux_rw_pa
-- ;; r7 - reg_gio_rw_pa_oe
-- ;; r8 - reg_bif_core_rw_grp3_cfg
-+ ;; r5 - byte counter within a page / tmp2
-+ ;; r6 - r_bootsel masked w/ 0x18
-+ ;; r7 - n/u
-+ ;; r8 - n/u
- ;; r9 - reg_gio_rw_pa_dout shadow
-- move.d 0x90000000, $r0
-- move.d 0x94000000, $r1
-+ move.d NAND_RD_ADDR, $r0
-+ move.d NAND_WR_ADDR, $r1
- move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r2
- move.d REG_ADDR(gio, regi_gio, r_pa_din), $r3
-- move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r6
-- move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r7
-- move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r8
-
--#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
-+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2
- lsrq 1, $r11
- #endif
-+
-+#if INTERFACE_SETUP
-+ ;; Set up pinmux
-+ move.d REG_ADDR(pinmux, regi_pinmux, rw_pa), $r5
-+ move.d [$r5], $r4
-+ or.b 0xf0, $r4 ; bits 4,5,6,7
-+ move.d $r4, [$r5]
-+
- ;; Set up GPIO
-- move.d [$r2], $r9
-- move.d [$r7], $r4
-+ move.d REG_ADDR(gio, regi_gio, rw_pa_oe), $r5
-+ move.d [$r5], $r4
- or.b (1<<ALE) | (1 << CLE) | (1<<CE), $r4
-- move.d $r4, [$r7]
-+ move.d $r4, [$r5]
-
-+#endif
- ;; Set up bif
-- move.d [$r8], $r4
-- and.d CSP_MASK, $r4
-+ move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r5
-+ move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r4 ; wait states
-+ and.d ~CSP_MASK, $r4
- or.d CSP_VAL, $r4
-- move.d $r4, [$r8]
-+ move.d $r4, [$r5]
-+
-+ move.d [$r2], $r9 ; fetch PA DOUT to shadow register
-+
-+ ;; figure out how many address cycles the flash needs
-+ move.d REG_ADDR(config, regi_config, r_bootsel), $r5
-+ move.d [$r5], $r6
-+ andq 0x18, $r6 ; mask out bs3,4 (00=>3, 08=>4, 18=>5 cycles)
-
- 1: ;; Copy one page
- CLR CE
- SET CLE
-+ GPIO_SYNC
- moveq READ_CMD, $r4
- move.b $r4, [$r1]
-- moveq 20, $r4
--2: bne 2b
-- subq 1, $r4
-+ BUS_SYNC $r4
- CLR CLE
- SET ALE
-- clear.w [$r1] ; Column address = 0
-- move.d $r11, $r4
-+ GPIO_SYNC
-+ clear.b [$r1] ; Column address = 0
-+ move.d $r11, $r4 ; Address
-+ lsrq 9, $r4 ; Row address is A9 and up
-+ move.b $r4, [$r1] ; Row address byte #0
- lsrq 8, $r4
-- move.b $r4, [$r1] ; Row address
-+ cmpq 0x08, $r6 ; 8 => Z, 0 => C, 18h => NZ,NC
-+ bcs 4f ; C (3 cycles) => jump
-+ move.b $r4, [$r1] ; Row address byte #1 (DELAY SLOT) (no flagset)
-+ beq 3f ; Z (4 cycles) => jump
-+ lsrq 8, $r4 ; (DELAY SLOT)
-+ move.b $r4, [$r1] ; Row address byte #2 (5 cyc only)
- lsrq 8, $r4
-- move.b $r4, [$r1] ; Row adddress
-- moveq 20, $r4
--2: bne 2b
-- subq 1, $r4
-+3:
-+ move.b $r4, [$r1] ; Row address byte #3 (5 cyc) or #2 (4 cyc)
-+4:
-+ BUS_SYNC $r4
- CLR ALE
-+ GPIO_SYNC
-+
- 2: move.d [$r3], $r4
- and.d 1 << BY, $r4
- beq 2b
-- movu.w PAGE_SIZE, $r5
-+ nop
-+ movu.w PAGE_SIZE_ADDRESSES, $r5
- 2: ; Copy one byte/word
--#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
-+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2
- move.w [$r0], $r4
- #else
- move.b [$r0], $r4
- #endif
- subq 1, $r5
- bne 2b
--#if CONFIG_ETRAX_FLASH_BUSWIDTH==2
-+#if CONFIG_ETRAX_NANDFLASH_BUSWIDTH==2
- move.w $r4, [$r10+]
-- subu.w PAGE_SIZE*2, $r12
- #else
- move.b $r4, [$r10+]
-- subu.w PAGE_SIZE, $r12
- #endif
-- bpl 1b
-- addu.w PAGE_SIZE, $r11
-+ subu.w PAGE_SIZE_BYTES, $r12
-+ bhi 1b
-+ addu.w PAGE_SIZE_ADDRESSES, $r11
-
-- ;; End of copy
-- jump $r13
-- nop
-+ SET CE
-
-- ;; This will warn if the code above is too large. If you consider
-- ;; to remove this you don't understand the bug/feature.
-- .org 256
-- .org ERASE_BLOCK
--
--normal_boot:
-+ ;; End of copy
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/spinlock.S linux-2.6.19.2.dev/arch/cris/arch-v32/lib/spinlock.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/spinlock.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/spinlock.S 2006-05-24 11:38:43.000000000 +0200
-@@ -1,22 +1,22 @@
- ;; Core of the spinlock implementation
- ;;
--;; Copyright (C) 2004 Axis Communications AB.
-+;; Copyright (C) 2004 Axis Communications AB.
- ;;
--;; Author: Mikael Starvik
--
-+;; Author: Mikael Starvik
-
-+
- .global cris_spin_lock
- .global cris_spin_trylock
-
- .text
--
-+
- cris_spin_lock:
- clearf p
--1: test.d [$r10]
-+1: test.b [$r10]
- beq 1b
- clearf p
- ax
-- clear.d [$r10]
-+ clear.b [$r10]
- bcs 1b
- clearf p
- ret
-@@ -24,10 +24,10 @@
-
- cris_spin_trylock:
- clearf p
--1: move.d [$r10], $r11
-+1: move.b [$r10], $r11
- ax
-- clear.d [$r10]
-+ clear.b [$r10]
- bcs 1b
- clearf p
- ret
-- move.d $r11,$r10
-+ movu.b $r11,$r10
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/lib/string.c linux-2.6.19.2.dev/arch/cris/arch-v32/lib/string.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/lib/string.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/lib/string.c 2003-07-02 05:00:14.000000000 +0200
-@@ -48,8 +48,8 @@
- register char *dst __asm__ ("r13") = pdst;
- register const char *src __asm__ ("r11") = psrc;
- register int n __asm__ ("r12") = pn;
--
--
-+
-+
- /* When src is aligned but not dst, this makes a few extra needless
- cycles. I believe it would take as many to check that the
- re-alignment was unnecessary. */
-@@ -117,13 +117,13 @@
- ;; Restore registers from stack \n\
- movem [$sp+],$r10"
-
-- /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
-+ /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
- /* Inputs */ : "0" (dst), "1" (src), "2" (n));
--
-+
- }
-
- /* Either we directly starts copying, using dword copying
-- in a loop, or we copy as much as possible with 'movem'
-+ in a loop, or we copy as much as possible with 'movem'
- and then the last block (<44 bytes) is copied here.
- This will work since 'movem' will have updated src,dst,n. */
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/init.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/init.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/init.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/init.c 2006-10-13 14:43:14.000000000 +0200
-@@ -34,12 +34,12 @@
- unsigned long mmu_kbase_hi;
- unsigned long mmu_kbase_lo;
- unsigned short mmu_page_id;
--
-- /*
-+
-+ /*
- * Make sure the current pgd table points to something sane, even if it
- * is most probably not used until the next switch_mm.
- */
-- per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd;
-+ per_cpu(current_pgd, smp_processor_id()) = init_mm.pgd;
-
- #ifdef CONFIG_SMP
- {
-@@ -65,7 +65,7 @@
- REG_STATE(mmu, rw_mm_cfg, seg_d, page) |
- REG_STATE(mmu, rw_mm_cfg, seg_c, linear) |
- REG_STATE(mmu, rw_mm_cfg, seg_b, linear) |
--#ifndef CONFIG_ETRAXFS_SIM
-+#ifndef CONFIG_ETRAXFS_SIM
- REG_STATE(mmu, rw_mm_cfg, seg_a, page) |
- #else
- REG_STATE(mmu, rw_mm_cfg, seg_a, linear) |
-@@ -115,7 +115,7 @@
- SUPP_REG_WR(RW_MM_KBASE_HI, mmu_kbase_hi);
- SUPP_REG_WR(RW_MM_KBASE_LO, mmu_kbase_lo);
- SUPP_REG_WR(RW_MM_TLB_HI, mmu_page_id);
--
-+
- /* Update the data MMU. */
- SUPP_BANK_SEL(BANK_DM);
- SUPP_REG_WR(RW_MM_CFG, mmu_config);
-@@ -125,7 +125,7 @@
-
- SPEC_REG_WR(SPEC_REG_PID, 0);
-
-- /*
-+ /*
- * The MMU has been enabled ever since head.S but just to make it
- * totally obvious enable it here as well.
- */
-@@ -133,7 +133,7 @@
- SUPP_REG_WR(RW_GC_CFG, 0xf); /* IMMU, DMMU, ICache, DCache on */
- }
-
--void __init
-+void __init
- paging_init(void)
- {
- int i;
-@@ -160,13 +160,13 @@
- for (i = 1; i < MAX_NR_ZONES; i++)
- zones_size[i] = 0;
-
-- /*
-+ /*
- * Use free_area_init_node instead of free_area_init, because it is
-- * designed for systems where the DRAM starts at an address
-+ * designed for systems where the DRAM starts at an address
- * substantially higher than 0, like us (we start at PAGE_OFFSET). This
- * saves space in the mem_map page array.
- */
- free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
--
-+
- mem_map = contig_page_data.node_mem_map;
- }
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/intmem.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/intmem.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/intmem.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/intmem.c 2006-01-02 12:27:04.000000000 +0100
-@@ -27,7 +27,7 @@
- {
- static int initiated = 0;
- if (!initiated) {
-- struct intmem_allocation* alloc =
-+ struct intmem_allocation* alloc =
- (struct intmem_allocation*)kmalloc(sizeof *alloc, GFP_KERNEL);
- INIT_LIST_HEAD(&intmem_allocations);
- intmem_virtual = ioremap(MEM_INTMEM_START, MEM_INTMEM_SIZE);
-@@ -44,7 +44,7 @@
- struct intmem_allocation* allocation;
- struct intmem_allocation* tmp;
- void* ret = NULL;
--
-+
- preempt_disable();
- crisv32_intmem_init();
-
-@@ -55,7 +55,7 @@
- if (allocation->status == STATUS_FREE &&
- allocation->size >= size + alignment) {
- if (allocation->size > size + alignment) {
-- struct intmem_allocation* alloc =
-+ struct intmem_allocation* alloc =
- (struct intmem_allocation*)
- kmalloc(sizeof *alloc, GFP_ATOMIC);
- alloc->status = STATUS_FREE;
-@@ -73,13 +73,13 @@
- allocation->offset += alignment;
- list_add_tail(&tmp->entry, &allocation->entry);
- }
-- }
-+ }
- allocation->status = STATUS_ALLOCATED;
- allocation->size = size;
- ret = (void*)((int)intmem_virtual + allocation->offset);
- }
- }
-- preempt_enable();
-+ preempt_enable();
- return ret;
- }
-
-@@ -96,22 +96,22 @@
-
- list_for_each_entry_safe(allocation, tmp, &intmem_allocations, entry) {
- if (allocation->offset == (int)(addr - intmem_virtual)) {
-- struct intmem_allocation* prev =
-- list_entry(allocation->entry.prev,
-+ struct intmem_allocation* prev =
-+ list_entry(allocation->entry.prev,
- struct intmem_allocation, entry);
-- struct intmem_allocation* next =
-- list_entry(allocation->entry.next,
-+ struct intmem_allocation* next =
-+ list_entry(allocation->entry.next,
- struct intmem_allocation, entry);
-
- allocation->status = STATUS_FREE;
- /* Join with prev and/or next if also free */
-- if (prev->status == STATUS_FREE) {
-+ if ((prev != &intmem_allocations) && (prev->status == STATUS_FREE)) {
- prev->size += allocation->size;
- list_del(&allocation->entry);
- kfree(allocation);
- allocation = prev;
- }
-- if (next->status == STATUS_FREE) {
-+ if ((next != &intmem_allocations) && (next->status == STATUS_FREE)) {
- allocation->size += next->size;
- list_del(&next->entry);
- kfree(next);
-@@ -125,13 +125,13 @@
-
- void* crisv32_intmem_phys_to_virt(unsigned long addr)
- {
-- return (void*)(addr - MEM_INTMEM_START+
-+ return (void*)(addr - MEM_INTMEM_START+
- (unsigned long)intmem_virtual);
- }
-
- unsigned long crisv32_intmem_virt_to_phys(void* addr)
- {
-- return (unsigned long)((unsigned long )addr -
-+ return (unsigned long)((unsigned long )addr -
- (unsigned long)intmem_virtual + MEM_INTMEM_START);
- }
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/mmu.S linux-2.6.19.2.dev/arch/cris/arch-v32/mm/mmu.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/mmu.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/mmu.S 2006-08-04 10:10:20.000000000 +0200
-@@ -1,3 +1,5 @@
-+; WARNING : The refill handler has been modified, see below !!!
-+
- /*
- * Copyright (C) 2003 Axis Communications AB
- *
-@@ -9,7 +11,7 @@
-
- #include <asm/page.h>
- #include <asm/pgtable.h>
--
-+
- ; Save all register. Must save in same order as struct pt_regs.
- .macro SAVE_ALL
- subq 12, $sp
-@@ -29,11 +31,11 @@
- subq 14*4, $sp
- movem $r13, [$sp]
- subq 4, $sp
-- move.d $r10, [$sp]
-+ move.d $r10, [$sp]
- .endm
-
- ; Bus fault handler. Extracts relevant information and calls mm subsystem
--; to handle the fault.
-+; to handle the fault.
- .macro MMU_BUS_FAULT_HANDLER handler, mmu, we, ex
- .globl \handler
- \handler:
-@@ -45,7 +47,7 @@
- orq \ex << 1, $r13 ; execute?
- move $s3, $r10 ; rw_mm_cause
- and.d ~8191, $r10 ; Get faulting page start address
--
-+
- jsr do_page_fault
- nop
- ba ret_from_intr
-@@ -59,15 +61,28 @@
- ; The code below handles case 1 and calls the mm subsystem for case 2 and 3.
- ; Do not touch this code without very good reasons and extensive testing.
- ; Note that the code is optimized to minimize stalls (makes the code harder
--; to read).
-+; to read).
-+;
-+; WARNING !!!
-+; Modified by Mikael Asker 060725: added a workaround for strange TLB
-+; behavior. If the same PTE is present in more than one set, the TLB
-+; doesn't recognize it and we get stuck in a loop of refill exceptions.
-+; The workaround detects such loops and exits them by flushing
-+; the TLB contents. The problem and workaround were verified
-+; in VCS by Mikael Starvik.
- ;
- ; Each page is 8 KB. Each PMD holds 8192/4 PTEs (each PTE is 4 bytes) so each
--; PMD holds 16 MB of virtual memory.
-+; PMD holds 16 MB of virtual memory.
- ; Bits 0-12 : Offset within a page
- ; Bits 13-23 : PTE offset within a PMD
- ; Bits 24-31 : PMD offset within the PGD
--
-+
- .macro MMU_REFILL_HANDLER handler, mmu
-+ .data
-+1: .dword 0 ; refill_count
-+ ; == 0 <=> last_refill_cause is invalid
-+2: .dword 0 ; last_refill_cause
-+ .text
- .globl \handler
- \handler:
- subq 4, $sp
-@@ -76,40 +91,88 @@
- subq 4, $sp
- move \mmu, $srs ; Select MMU support register bank
- move.d $acr, [$sp]
-- subq 4, $sp
-- move.d $r0, [$sp]
--#ifdef CONFIG_SMP
-+ subq 12, $sp
-+ move.d 1b, $acr ; Point to refill_count
-+ movem $r2, [$sp]
-+
-+ test.d [$acr] ; refill_count == 0 ?
-+ beq 5f ; yes, last_refill_cause is invalid
-+ move.d $acr, $r1
-+
-+ ; last_refill_cause is valid, investigate cause
-+ addq 4, $r1 ; Point to last_refill_cause
-+ move $s3, $r0 ; Get rw_mm_cause
-+ move.d [$r1], $r2 ; Get last_refill_cause
-+ cmp.d $r0, $r2 ; rw_mm_cause == last_refill_cause ?
-+ beq 6f ; yes, increment count
-+ moveq 1, $r2
-+
-+ ; rw_mm_cause != last_refill_cause
-+ move.d $r2, [$acr] ; refill_count = 1
-+ move.d $r0, [$r1] ; last_refill_cause = rw_mm_cause
-+
-+3: ; Probably not in a loop, continue normal processing
-+#ifdef CONFIG_SMP
- move $s7, $acr ; PGD
- #else
- move.d per_cpu__current_pgd, $acr ; PGD
- #endif
- ; Look up PMD in PGD
-- move $s3, $r0 ; rw_mm_cause
- lsrq 24, $r0 ; Get PMD index into PGD (bit 24-31)
- move.d [$acr], $acr ; PGD for the current process
- addi $r0.d, $acr, $acr
- move $s3, $r0 ; rw_mm_cause
- move.d [$acr], $acr ; Get PMD
-- beq 1f
-+ beq 8f
- ; Look up PTE in PMD
- lsrq PAGE_SHIFT, $r0
- and.w PAGE_MASK, $acr ; Remove PMD flags
- and.d 0x7ff, $r0 ; Get PTE index into PMD (bit 13-23)
- addi $r0.d, $acr, $acr
- move.d [$acr], $acr ; Get PTE
-- beq 2f
-- move.d [$sp+], $r0 ; Pop r0 in delayslot
-+ beq 9f
-+ movem [$sp], $r2 ; Restore r0-r2 in delay slot
-+ addq 12, $sp
- ; Store in TLB
- move $acr, $s5
-- ; Return
-+4: ; Return
- move.d [$sp+], $acr
- move [$sp], $srs
- addq 4, $sp
- rete
- rfe
--1: ; PMD missing, let the mm subsystem fix it up.
-- move.d [$sp+], $r0 ; Pop r0
--2: ; PTE missing, let the mm subsystem fix it up.
-+
-+5: ; last_refill_cause is invalid
-+ moveq 1, $r2
-+ addq 4, $r1 ; Point to last_refill_cause
-+ move.d $r2, [$acr] ; refill_count = 1
-+ move $s3, $r0 ; Get rw_mm_cause
-+ ba 3b ; Continue normal processing
-+ move.d $r0,[$r1] ; last_refill_cause = rw_mm_cause
-+
-+6: ; rw_mm_cause == last_refill_cause
-+ move.d [$acr], $r2 ; Get refill_count
-+ cmpq 4, $r2 ; refill_count > 4 ?
-+ bhi 7f ; yes
-+ addq 1, $r2 ; refill_count++
-+ ba 3b ; Continue normal processing
-+ move.d $r2, [$acr]
-+
-+7: ; refill_count > 4, error
-+ subq 4, $sp
-+ move $srp, [$sp]
-+ jsr __flush_tlb_all
-+ move.d $acr, $r0 ; Save pointer to refill_count
-+ move [$sp+], $srp
-+ clear.d [$r0] ; refill_count = 0
-+ movem [$sp], $r2
-+ ba 4b ; Return
-+ addq 12, $sp
-+
-+8: ; PMD missing, let the mm subsystem fix it up.
-+ movem [$sp], $r2 ; Restore r0-r2
-+9: ; PTE missing, let the mm subsystem fix it up.
-+ addq 12, $sp
- move.d [$sp+], $acr
- move [$sp], $srs
- addq 4, $sp
-@@ -128,7 +191,7 @@
- ba ret_from_intr
- nop
- .endm
--
-+
- ; This is the MMU bus fault handlers.
-
- MMU_REFILL_HANDLER i_mmu_refill, 1
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/mm/tlb.c linux-2.6.19.2.dev/arch/cris/arch-v32/mm/tlb.c
---- linux-2.6.19.2.old/arch/cris/arch-v32/mm/tlb.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/mm/tlb.c 2006-08-07 12:06:44.000000000 +0200
-@@ -2,7 +2,7 @@
- * Low level TLB handling.
- *
- * Copyright (C) 2000-2003, Axis Communications AB.
-- *
-+ *
- * Authors: Bjorn Wesen <bjornw@axis.com>
- * Tobias Anderberg <tobiasa@axis.com>, CRISv32 port.
- */
-@@ -79,7 +79,7 @@
- void
- __flush_tlb_mm(struct mm_struct *mm)
- {
-- int i;
-+ int i;
- int mmu;
- unsigned long flags;
- unsigned long page_id;
-@@ -90,7 +90,7 @@
-
- if (page_id == NO_CONTEXT)
- return;
--
-+
- /* Mark the TLB entries that match the page_id as invalid. */
- local_save_flags(flags);
- local_irq_disable();
-@@ -99,15 +99,15 @@
- SUPP_BANK_SEL(mmu);
- for (i = 0; i < NUM_TLB_ENTRIES; i++) {
- UPDATE_TLB_SEL_IDX(i);
--
-+
- /* Get the page_id */
- SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi);
-
- /* Check if the page_id match. */
- if ((tlb_hi & 0xff) == page_id) {
- mmu_tlb_hi = (REG_FIELD(mmu, rw_mm_tlb_hi, pid,
-- INVALID_PAGEID)
-- | REG_FIELD(mmu, rw_mm_tlb_hi, vpn,
-+ INVALID_PAGEID)
-+ | REG_FIELD(mmu, rw_mm_tlb_hi, vpn,
- i & 0xf));
-
- UPDATE_TLB_HILO(mmu_tlb_hi, 0);
-@@ -135,7 +135,7 @@
- return;
-
- addr &= PAGE_MASK;
--
-+
- /*
- * Invalidate those TLB entries that match both the mm context and the
- * requested virtual address.
-@@ -150,11 +150,11 @@
- SUPP_REG_RD(RW_MM_TLB_HI, tlb_hi);
-
- /* Check if page_id and address matches */
-- if (((tlb_hi & 0xff) == page_id) &&
-+ if (((tlb_hi & 0xff) == page_id) &&
- ((tlb_hi & PAGE_MASK) == addr)) {
- mmu_tlb_hi = REG_FIELD(mmu, rw_mm_tlb_hi, pid,
- INVALID_PAGEID) | addr;
--
-+
- UPDATE_TLB_HILO(mmu_tlb_hi, 0);
- }
- }
-@@ -178,33 +178,35 @@
- static DEFINE_SPINLOCK(mmu_context_lock);
-
- /* Called in schedule() just before actually doing the switch_to. */
--void
-+void
- switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
--{
-- int cpu = smp_processor_id();
--
-- /* Make sure there is a MMU context. */
-- spin_lock(&mmu_context_lock);
-- get_mmu_context(next);
-- cpu_set(cpu, next->cpu_vm_mask);
-- spin_unlock(&mmu_context_lock);
--
-- /*
-- * Remember the pgd for the fault handlers. Keep a seperate copy of it
-- * because current and active_mm might be invalid at points where
-- * there's still a need to derefer the pgd.
-- */
-- per_cpu(current_pgd, cpu) = next->pgd;
--
-- /* Switch context in the MMU. */
-- if (tsk && task_thread_info(tsk))
-- {
-- SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls);
-- }
-- else
-- {
-- SPEC_REG_WR(SPEC_REG_PID, next->context.page_id);
-- }
-+{
-+ if (prev != next) {
-+ int cpu = smp_processor_id();
-+
-+ /* Make sure there is a MMU context. */
-+ spin_lock(&mmu_context_lock);
-+ get_mmu_context(next);
-+ cpu_set(cpu, next->cpu_vm_mask);
-+ spin_unlock(&mmu_context_lock);
-+
-+ /*
-+ * Remember the pgd for the fault handlers. Keep a seperate copy of it
-+ * because current and active_mm might be invalid at points where
-+ * there's still a need to derefer the pgd.
-+ */
-+ per_cpu(current_pgd, cpu) = next->pgd;
-+
-+ /* Switch context in the MMU. */
-+ if (tsk && task_thread_info(tsk))
-+ {
-+ SPEC_REG_WR(SPEC_REG_PID, next->context.page_id | task_thread_info(tsk)->tls);
-+ }
-+ else
-+ {
-+ SPEC_REG_WR(SPEC_REG_PID, next->context.page_id);
-+ }
-+ }
- }
-
-diff -urN linux-2.6.19.2.old/arch/cris/arch-v32/vmlinux.lds.S linux-2.6.19.2.dev/arch/cris/arch-v32/vmlinux.lds.S
---- linux-2.6.19.2.old/arch/cris/arch-v32/vmlinux.lds.S 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/arch-v32/vmlinux.lds.S 2006-10-13 14:43:11.000000000 +0200
-@@ -5,11 +5,11 @@
- * script. It is for example quite vital that all generated sections
- * that are used are actually named here, otherwise the linker will
- * put them at the end, where the init stuff is which is FREED after
-- * the kernel has booted.
-- */
-+ * the kernel has booted.
-+ */
-
- #include <asm-generic/vmlinux.lds.h>
--
-+
- jiffies = jiffies_64;
- SECTIONS
- {
-@@ -20,7 +20,7 @@
- /* The boot section is only necessary until the VCS top level testbench */
- /* includes both flash and DRAM. */
- .boot : { *(.boot) }
--
-+
- . = DRAM_VIRTUAL_BASE + 0x4000; /* See head.S and pages reserved at the start. */
-
- _text = .; /* Text and read-only data. */
-@@ -35,7 +35,7 @@
- *(.text.__*)
- }
-
-- _etext = . ; /* End of text section. */
-+ _etext = . ; /* End of text section. */
- __etext = .;
-
- . = ALIGN(4); /* Exception table. */
-@@ -59,7 +59,7 @@
-
- . = ALIGN(8192); /* Init code and data. */
- __init_begin = .;
-- .init.text : {
-+ .init.text : {
- _sinittext = .;
- *(.init.text)
- _einittext = .;
-@@ -81,7 +81,7 @@
- *(.initcall5.init);
- *(.initcall6.init);
- *(.initcall7.init);
-- __initcall_end = .;
-+ __initcall_end = .;
- }
-
- .con_initcall.init : {
-@@ -94,20 +94,20 @@
- __per_cpu_start = .;
- .data.percpu : { *(.data.percpu) }
- __per_cpu_end = .;
--
-+
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
-- /*
-+ /*
- * We fill to the next page, so we can discard all init
- * pages without needing to consider what payload might be
- * appended to the kernel image.
- */
-- FILL (0);
-+ FILL (0);
- . = ALIGN (8192);
- }
--
-+
- __vmlinux_end = .; /* Last address of the physical file. */
- __init_end = .;
-
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/crisksyms.c linux-2.6.19.2.dev/arch/cris/kernel/crisksyms.c
---- linux-2.6.19.2.old/arch/cris/kernel/crisksyms.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/crisksyms.c 2006-11-03 13:49:17.000000000 +0100
-@@ -9,7 +9,7 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/tty.h>
--
-+
- #include <asm/semaphore.h>
- #include <asm/processor.h>
- #include <asm/uaccess.h>
-@@ -28,6 +28,7 @@
- extern void __ashldi3(void);
- extern void __ashrdi3(void);
- extern void __lshrdi3(void);
-+extern void __negdi2(void);
- extern void iounmap(volatile void * __iomem);
-
- /* Platform dependent support */
-@@ -35,18 +36,7 @@
- EXPORT_SYMBOL(get_cmos_time);
- EXPORT_SYMBOL(loops_per_usec);
-
--/* String functions */
--EXPORT_SYMBOL(memcmp);
--EXPORT_SYMBOL(memmove);
--EXPORT_SYMBOL(strstr);
--EXPORT_SYMBOL(strcpy);
--EXPORT_SYMBOL(strchr);
--EXPORT_SYMBOL(strcmp);
--EXPORT_SYMBOL(strlen);
--EXPORT_SYMBOL(strcat);
--EXPORT_SYMBOL(strncat);
--EXPORT_SYMBOL(strncmp);
--EXPORT_SYMBOL(strncpy);
-+EXPORT_SYMBOL(ktime_get_ts);
-
- /* Math functions */
- EXPORT_SYMBOL(__Udiv);
-@@ -56,6 +46,7 @@
- EXPORT_SYMBOL(__ashldi3);
- EXPORT_SYMBOL(__ashrdi3);
- EXPORT_SYMBOL(__lshrdi3);
-+EXPORT_SYMBOL(__negdi2);
-
- /* Memory functions */
- EXPORT_SYMBOL(__ioremap);
-@@ -85,4 +76,4 @@
- EXPORT_SYMBOL(del_fast_timer);
- EXPORT_SYMBOL(schedule_usleep);
- #endif
--
-+EXPORT_SYMBOL(csum_partial);
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/irq.c linux-2.6.19.2.dev/arch/cris/kernel/irq.c
---- linux-2.6.19.2.old/arch/cris/kernel/irq.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/irq.c 2007-01-09 10:29:20.000000000 +0100
-@@ -92,14 +92,16 @@
- asmlinkage void do_IRQ(int irq, struct pt_regs * regs)
- {
- unsigned long sp;
-+ struct pt_regs *old_regs = set_irq_regs(regs);
- irq_enter();
- sp = rdsp();
- if (unlikely((sp & (PAGE_SIZE - 1)) < (PAGE_SIZE/8))) {
- printk("do_IRQ: stack overflow: %lX\n", sp);
- show_stack(NULL, (unsigned long *)sp);
- }
-- __do_IRQ(irq, regs);
-+ __do_IRQ(irq);
- irq_exit();
-+ set_irq_regs(old_regs);
- }
-
- void weird_irq(void)
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/process.c linux-2.6.19.2.dev/arch/cris/kernel/process.c
---- linux-2.6.19.2.old/arch/cris/kernel/process.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/process.c 2006-06-25 17:00:10.000000000 +0200
-@@ -1,4 +1,4 @@
--/* $Id: process.c,v 1.21 2005/03/04 08:16:17 starvik Exp $
-+/* $Id: process.c,v 1.26 2006/06/25 15:00:10 starvik Exp $
- *
- * linux/arch/cris/kernel/process.c
- *
-@@ -8,6 +8,21 @@
- * Authors: Bjorn Wesen (bjornw@axis.com)
- *
- * $Log: process.c,v $
-+ * Revision 1.26 2006/06/25 15:00:10 starvik
-+ * Merge of Linux 2.6.17
-+ *
-+ * Revision 1.25 2006/03/22 09:56:56 starvik
-+ * Merge of Linux 2.6.16
-+ *
-+ * Revision 1.24 2006/01/04 06:09:48 starvik
-+ * Merge of Linux 2.6.15
-+ *
-+ * Revision 1.23 2005/08/29 07:32:19 starvik
-+ * Merge of 2.6.13
-+ *
-+ * Revision 1.22 2005/08/18 08:33:18 starvik
-+ * Corrected signature of machine_restart
-+ *
- * Revision 1.21 2005/03/04 08:16:17 starvik
- * Merge of Linux 2.6.11.
- *
-@@ -195,12 +210,18 @@
- */
- void (*pm_idle)(void);
-
-+extern void default_idle(void);
-+
-+void (*pm_power_off)(void);
-+EXPORT_SYMBOL(pm_power_off);
-+
- /*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-+
- void cpu_idle (void)
- {
- /* endless idle loop with no priority at all */
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/profile.c linux-2.6.19.2.dev/arch/cris/kernel/profile.c
---- linux-2.6.19.2.old/arch/cris/kernel/profile.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/profile.c 2004-10-05 08:22:44.000000000 +0200
-@@ -42,7 +42,7 @@
- return count;
- }
-
--static ssize_t
-+static ssize_t
- write_cris_profile(struct file *file, const char __user *buf,
- size_t count, loff_t *ppos)
- {
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/ptrace.c linux-2.6.19.2.dev/arch/cris/kernel/ptrace.c
---- linux-2.6.19.2.old/arch/cris/kernel/ptrace.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/ptrace.c 2006-03-23 15:54:02.000000000 +0100
-@@ -8,6 +8,9 @@
- * Authors: Bjorn Wesen
- *
- * $Log: ptrace.c,v $
-+ * Revision 1.11 2006/03/23 14:54:02 starvik
-+ * Corrected signal handling.
-+ *
- * Revision 1.10 2004/09/22 11:50:01 orjanf
- * * Moved get_reg/put_reg to arch-specific files.
- * * Added functions to access debug registers (CRISv32).
-@@ -82,13 +85,13 @@
- /* notification of userspace execution resumption
- * - triggered by current->work.notify_resume
- */
--extern int do_signal(int canrestart, sigset_t *oldset, struct pt_regs *regs);
-+extern int do_signal(int canrestart, struct pt_regs *regs);
-
-
--void do_notify_resume(int canrestart, sigset_t *oldset, struct pt_regs *regs,
-+void do_notify_resume(int canrestart, struct pt_regs *regs,
- __u32 thread_info_flags )
- {
- /* deal with pending signal delivery */
- if (thread_info_flags & _TIF_SIGPENDING)
-- do_signal(canrestart,oldset,regs);
-+ do_signal(canrestart,regs);
- }
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/semaphore.c linux-2.6.19.2.dev/arch/cris/kernel/semaphore.c
---- linux-2.6.19.2.old/arch/cris/kernel/semaphore.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/semaphore.c 2005-10-31 09:48:05.000000000 +0100
-@@ -4,7 +4,7 @@
- */
-
- #include <linux/sched.h>
--#include <linux/init.h>
-+#include <asm/semaphore.h>
- #include <asm/semaphore-helper.h>
-
- /*
-@@ -95,6 +95,7 @@
- tsk->state = TASK_RUNNING; \
- remove_wait_queue(&sem->wait, &wait);
-
-+
- void __sched __down(struct semaphore * sem)
- {
- DOWN_VAR
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/setup.c linux-2.6.19.2.dev/arch/cris/kernel/setup.c
---- linux-2.6.19.2.old/arch/cris/kernel/setup.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/setup.c 2007-01-09 10:29:20.000000000 +0100
-@@ -18,7 +18,7 @@
- #include <linux/screen_info.h>
- #include <linux/utsname.h>
- #include <linux/pfn.h>
--
-+#include <linux/cpu.h>
- #include <asm/setup.h>
-
- /*
-@@ -36,6 +36,8 @@
-
- extern unsigned long romfs_start, romfs_length, romfs_in_flash; /* from head.S */
-
-+static struct cpu cpu_devices[NR_CPUS];
-+
- extern void show_etrax_copyright(void); /* arch-vX/kernel/setup.c */
-
- /* This mainly sets up the memory area, and can be really confusing.
-@@ -187,4 +189,14 @@
- .show = show_cpuinfo,
- };
-
-+static int __init topology_init(void)
-+{
-+ int i;
-+
-+ for_each_possible_cpu(i) {
-+ return register_cpu(&cpu_devices[i], i);
-+ }
-+}
-+
-+subsys_initcall(topology_init);
-
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/sys_cris.c linux-2.6.19.2.dev/arch/cris/kernel/sys_cris.c
---- linux-2.6.19.2.old/arch/cris/kernel/sys_cris.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/sys_cris.c 2007-01-09 10:29:20.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: sys_cris.c,v 1.6 2004/03/11 11:38:40 starvik Exp $
-+/* $Id: sys_cris.c,v 1.7 2007/01/09 09:29:20 starvik Exp $
- *
- * linux/arch/cris/kernel/sys_cris.c
- *
-@@ -172,3 +172,4 @@
- return -ENOSYS;
- }
- }
-+
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/time.c linux-2.6.19.2.dev/arch/cris/kernel/time.c
---- linux-2.6.19.2.old/arch/cris/kernel/time.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/time.c 2007-01-09 10:29:20.000000000 +0100
-@@ -1,4 +1,4 @@
--/* $Id: time.c,v 1.18 2005/03/04 08:16:17 starvik Exp $
-+/* $Id: time.c,v 1.23 2007/01/09 09:29:20 starvik Exp $
- *
- * linux/arch/cris/kernel/time.c
- *
-@@ -172,10 +172,6 @@
- mon = CMOS_READ(RTC_MONTH);
- year = CMOS_READ(RTC_YEAR);
-
-- printk(KERN_DEBUG
-- "rtc: sec 0x%x min 0x%x hour 0x%x day 0x%x mon 0x%x year 0x%x\n",
-- sec, min, hour, day, mon, year);
--
- BCD_TO_BIN(sec);
- BCD_TO_BIN(min);
- BCD_TO_BIN(hour);
-@@ -208,11 +204,11 @@
- cris_do_profile(struct pt_regs* regs)
- {
-
--#if CONFIG_SYSTEM_PROFILER
-+#ifdef CONFIG_SYSTEM_PROFILER
- cris_profile_sample(regs);
- #endif
-
--#if CONFIG_PROFILING
-+#ifdef CONFIG_PROFILING
- profile_tick(CPU_PROFILING, regs);
- #endif
- }
-@@ -222,10 +218,15 @@
- */
- unsigned long long sched_clock(void)
- {
-- return (unsigned long long)jiffies * (1000000000 / HZ);
-+ unsigned long long ns;
-+
-+ ns = jiffies;
-+ ns *= 1000000000 / HZ;
-+ ns += get_ns_in_jiffie();
-+ return ns;
- }
-
--static int
-+static int
- __init init_udelay(void)
- {
- loops_per_usec = (loops_per_jiffy * HZ) / 1000000;
-diff -urN linux-2.6.19.2.old/arch/cris/kernel/traps.c linux-2.6.19.2.dev/arch/cris/kernel/traps.c
---- linux-2.6.19.2.old/arch/cris/kernel/traps.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/kernel/traps.c 2006-12-11 14:04:23.000000000 +0100
-@@ -1,66 +1,78 @@
--/* $Id: traps.c,v 1.11 2005/01/24 16:03:19 orjanf Exp $
-- *
-+/*
- * linux/arch/cris/traps.c
- *
-- * Here we handle the break vectors not used by the system call
-- * mechanism, as well as some general stack/register dumping
-+ * Here we handle the break vectors not used by the system call
-+ * mechanism, as well as some general stack/register dumping
- * things.
-- *
-- * Copyright (C) 2000-2002 Axis Communications AB
-+ *
-+ * Copyright (C) 2000-2006 Axis Communications AB
- *
- * Authors: Bjorn Wesen
-- * Hans-Peter Nilsson
-+ * Hans-Peter Nilsson
- *
- */
-
- #include <linux/init.h>
- #include <linux/module.h>
-+
- #include <asm/pgtable.h>
- #include <asm/uaccess.h>
-
-+extern void arch_enable_nmi(void);
-+extern void stop_watchdog(void);
-+extern void reset_watchdog(void);
-+extern void show_registers(struct pt_regs *regs);
-+
-+#ifdef CONFIG_DEBUG_BUGVERBOSE
-+extern void handle_BUG(struct pt_regs *regs);
-+#else
-+#define handle_BUG(regs)
-+#endif
-+
- static int kstack_depth_to_print = 24;
-
--extern int raw_printk(const char *fmt, ...);
-+void (*nmi_handler)(struct pt_regs*);
-
--void show_trace(unsigned long * stack)
-+void
-+show_trace(unsigned long *stack)
- {
- unsigned long addr, module_start, module_end;
- extern char _stext, _etext;
- int i;
-
-- raw_printk("\nCall Trace: ");
-+ printk("\nCall Trace: ");
-
-- i = 1;
-- module_start = VMALLOC_START;
-- module_end = VMALLOC_END;
-+ i = 1;
-+ module_start = VMALLOC_START;
-+ module_end = VMALLOC_END;
-
-- while (((long) stack & (THREAD_SIZE-1)) != 0) {
-- if (__get_user (addr, stack)) {
-+ while (((long)stack & (THREAD_SIZE-1)) != 0) {
-+ if (__get_user(addr, stack)) {
- /* This message matches "failing address" marked
- s390 in ksymoops, so lines containing it will
- not be filtered out by ksymoops. */
-- raw_printk ("Failing address 0x%lx\n", (unsigned long)stack);
-+ printk("Failing address 0x%lx\n", (unsigned long)stack);
- break;
- }
- stack++;
-
-- /*
-- * If the address is either in the text segment of the
-- * kernel, or in the region which contains vmalloc'ed
-- * memory, it *may* be the address of a calling
-- * routine; if so, print it so that someone tracing
-- * down the cause of the crash will be able to figure
-- * out the call path that was taken.
-- */
-- if (((addr >= (unsigned long) &_stext) &&
-- (addr <= (unsigned long) &_etext)) ||
-- ((addr >= module_start) && (addr <= module_end))) {
-- if (i && ((i % 8) == 0))
-- raw_printk("\n ");
-- raw_printk("[<%08lx>] ", addr);
-- i++;
-- }
-- }
-+ /*
-+ * If the address is either in the text segment of the
-+ * kernel, or in the region which contains vmalloc'ed
-+ * memory, it *may* be the address of a calling
-+ * routine; if so, print it so that someone tracing
-+ * down the cause of the crash will be able to figure
-+ * out the call path that was taken.
-+ */
-+ if (((addr >= (unsigned long)&_stext) &&
-+ (addr <= (unsigned long)&_etext)) ||
-+ ((addr >= module_start) && (addr <= module_end))) {
-+ if (i && ((i % 8) == 0))
-+ printk("\n ");
-+ printk("[<%08lx>] ", addr);
-+ i++;
-+ }
-+ }
- }
-
- /*
-@@ -78,109 +90,150 @@
- * with the ksymoops maintainer.
- */
-
--void
-+void
- show_stack(struct task_struct *task, unsigned long *sp)
- {
-- unsigned long *stack, addr;
-- int i;
-+ unsigned long *stack, addr;
-+ int i;
-
- /*
- * debugging aid: "show_stack(NULL);" prints a
- * back trace.
- */
-
-- if(sp == NULL) {
-+ if (sp == NULL) {
- if (task)
- sp = (unsigned long*)task->thread.ksp;
- else
- sp = (unsigned long*)rdsp();
- }
-
-- stack = sp;
-+ stack = sp;
-
-- raw_printk("\nStack from %08lx:\n ", (unsigned long)stack);
-- for(i = 0; i < kstack_depth_to_print; i++) {
-- if (((long) stack & (THREAD_SIZE-1)) == 0)
-- break;
-- if (i && ((i % 8) == 0))
-- raw_printk("\n ");
-- if (__get_user (addr, stack)) {
-+ printk("\nStack from %08lx:\n ", (unsigned long)stack);
-+ for (i = 0; i < kstack_depth_to_print; i++) {
-+ if (((long)stack & (THREAD_SIZE-1)) == 0)
-+ break;
-+ if (i && ((i % 8) == 0))
-+ printk("\n ");
-+ if (__get_user(addr, stack)) {
- /* This message matches "failing address" marked
- s390 in ksymoops, so lines containing it will
- not be filtered out by ksymoops. */
-- raw_printk ("Failing address 0x%lx\n", (unsigned long)stack);
-+ printk("Failing address 0x%lx\n", (unsigned long)stack);
- break;
- }
- stack++;
-- raw_printk("%08lx ", addr);
-- }
-+ printk("%08lx ", addr);
-+ }
- show_trace(sp);
- }
-
--static void (*nmi_handler)(struct pt_regs*);
--extern void arch_enable_nmi(void);
-+#if 0
-+/* displays a short stack trace */
-
--void set_nmi_handler(void (*handler)(struct pt_regs*))
-+int
-+show_stack(void)
- {
-- nmi_handler = handler;
-- arch_enable_nmi();
-+ unsigned long *sp = (unsigned long *)rdusp();
-+ int i;
-+
-+ printk("Stack dump [0x%08lx]:\n", (unsigned long)sp);
-+ for (i = 0; i < 16; i++)
-+ printk("sp + %d: 0x%08lx\n", i*4, sp[i]);
-+ return 0;
- }
-+#endif
-
--void handle_nmi(struct pt_regs* regs)
-+void
-+dump_stack(void)
- {
-- if (nmi_handler)
-- nmi_handler(regs);
-+ show_stack(NULL, NULL);
-+}
-+
-+EXPORT_SYMBOL(dump_stack);
-+
-+void
-+set_nmi_handler(void (*handler)(struct pt_regs*))
-+{
-+ nmi_handler = handler;
-+ arch_enable_nmi();
- }
-
- #ifdef CONFIG_DEBUG_NMI_OOPS
--void oops_nmi_handler(struct pt_regs* regs)
-+void
-+oops_nmi_handler(struct pt_regs* regs)
- {
-- stop_watchdog();
-- raw_printk("NMI!\n");
-- show_registers(regs);
-+ stop_watchdog();
-+ oops_in_progress = 1;
-+ printk("NMI!\n");
-+ show_registers(regs);
-+ oops_in_progress = 0;
- }
-
--static int
--__init oops_nmi_register(void)
-+static int __init
-+oops_nmi_register(void)
- {
-- set_nmi_handler(oops_nmi_handler);
-- return 0;
-+ set_nmi_handler(oops_nmi_handler);
-+ return 0;
- }
-
- __initcall(oops_nmi_register);
-
- #endif
-
--#if 0
--/* displays a short stack trace */
--
--int
--show_stack()
-+/*
-+ * This gets called from entry.S when the watchdog has bitten. Show something
-+ * similiar to an Oops dump, and if the kernel is configured to be a nice
-+ * doggy, then halt instead of reboot.
-+ */
-+void
-+watchdog_bite_hook(struct pt_regs *regs)
- {
-- unsigned long *sp = (unsigned long *)rdusp();
-- int i;
-- raw_printk("Stack dump [0x%08lx]:\n", (unsigned long)sp);
-- for(i = 0; i < 16; i++)
-- raw_printk("sp + %d: 0x%08lx\n", i*4, sp[i]);
-- return 0;
--}
-+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-+ local_irq_disable();
-+ stop_watchdog();
-+ show_registers(regs);
-+
-+ while (1)
-+ ; /* Do nothing. */
-+#else
-+ show_registers(regs);
- #endif
-+}
-
--void dump_stack(void)
-+/* This is normally the Oops function. */
-+void
-+die_if_kernel(const char *str, struct pt_regs *regs, long err)
- {
-- show_stack(NULL, NULL);
--}
-+ if (user_mode(regs))
-+ return;
-
--EXPORT_SYMBOL(dump_stack);
-+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-+ /*
-+ * This printout might take too long and could trigger
-+ * the watchdog normally. If NICE_DOGGY is set, simply
-+ * stop the watchdog during the printout.
-+ */
-+ stop_watchdog();
-+#endif
-
--void __init
--trap_init(void)
--{
-- /* Nothing needs to be done */
-+ handle_BUG(regs);
-+
-+ printk("%s: %04lx\n", str, err & 0xffff);
-+
-+ show_registers(regs);
-+
-+ oops_in_progress = 0;
-+
-+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
-+ reset_watchdog();
-+#endif
-+ do_exit(SIGSEGV);
- }
-
--void spinning_cpu(void* addr)
-+void __init
-+trap_init(void)
- {
-- raw_printk("CPU %d spinning on %X\n", smp_processor_id(), addr);
-- dump_stack();
-+ /* Nothing needs to be done */
- }
-diff -urN linux-2.6.19.2.old/arch/cris/mm/fault.c linux-2.6.19.2.dev/arch/cris/mm/fault.c
---- linux-2.6.19.2.old/arch/cris/mm/fault.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/mm/fault.c 2006-09-29 13:14:06.000000000 +0200
-@@ -1,11 +1,27 @@
- /*
- * linux/arch/cris/mm/fault.c
- *
-- * Copyright (C) 2000, 2001 Axis Communications AB
-+ * Copyright (C) 2000-2006 Axis Communications AB
-+ *
-+ * Authors: Bjorn Wesen
- *
-- * Authors: Bjorn Wesen
-- *
- * $Log: fault.c,v $
-+ * Revision 1.25 2006/09/29 11:14:06 orjanf
-+ * * Use arch-independent macro to get irp/erp for v10/v32.
-+ *
-+ * Revision 1.24 2006/09/29 10:58:09 orjanf
-+ * * Added user mode SIGSEGV printk.
-+ *
-+ * Revision 1.23 2006/06/20 07:42:56 pkj
-+ * Removed an unnecessary reference to raw_printk().
-+ *
-+ * Revision 1.22 2005/08/29 07:32:20 starvik
-+ * Merge of 2.6.13
-+ *
-+ * Revision 1.21 2005/07/02 12:29:37 starvik
-+ * Use the generic oops_in_progress instead of the raw_printk hack.
-+ * Moved some functions to achr-independent code.
-+ *
- * Revision 1.20 2005/03/04 08:16:18 starvik
- * Merge of Linux 2.6.11.
- *
-@@ -135,7 +151,6 @@
-
- extern int find_fixup_code(struct pt_regs *);
- extern void die_if_kernel(const char *, struct pt_regs *, long);
--extern int raw_printk(const char *fmt, ...);
-
- /* debug of low-level TLB reload */
- #undef DEBUG
-@@ -164,8 +179,8 @@
- * address.
- *
- * error_code:
-- * bit 0 == 0 means no page found, 1 means protection fault
-- * bit 1 == 0 means read, 1 means write
-+ * bit 0 == 0 means no page found, 1 means protection fault
-+ * bit 1 == 0 means read, 1 means write
- *
- * If this routine detects a bad access, it returns 1, otherwise it
- * returns 0.
-@@ -180,9 +195,9 @@
- struct vm_area_struct * vma;
- siginfo_t info;
-
-- D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n",
-- address, smp_processor_id(), instruction_pointer(regs),
-- protection, writeaccess));
-+ D(printk("Page fault for %lX on %X at %lX, prot %d write %d\n",
-+ address, smp_processor_id(), instruction_pointer(regs),
-+ protection, writeaccess));
-
- tsk = current;
-
-@@ -318,6 +333,8 @@
- /* info.si_code has been set above */
- info.si_addr = (void *)address;
- force_sig_info(SIGSEGV, &info, tsk);
-+ printk(KERN_NOTICE "%s (pid %d) segfaults for page address %08lx at pc %08lx\n",
-+ tsk->comm, tsk->pid, address, instruction_pointer(regs));
- return;
- }
-
-@@ -325,7 +342,7 @@
-
- /* Are we prepared to handle this kernel fault?
- *
-- * (The kernel has valid exception-points in the source
-+ * (The kernel has valid exception-points in the source
- * when it acesses user-memory. When it fails in one
- * of those points, we find it in a table and do a jump
- * to some fixup code that loads an appropriate error
-@@ -340,13 +357,17 @@
- * terminate things with extreme prejudice.
- */
-
-- if ((unsigned long) (address) < PAGE_SIZE)
-- raw_printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-- else
-- raw_printk(KERN_ALERT "Unable to handle kernel access");
-- raw_printk(" at virtual address %08lx\n",address);
-+ if (!oops_in_progress) {
-+ oops_in_progress = 1;
-+ if ((unsigned long) (address) < PAGE_SIZE)
-+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
-+ else
-+ printk(KERN_ALERT "Unable to handle kernel access");
-+ printk(" at virtual address %08lx\n",address);
-
-- die_if_kernel("Oops", regs, (writeaccess << 1) | protection);
-+ die_if_kernel("Oops", regs, (writeaccess << 1) | protection);
-+ oops_in_progress = 0;
-+ }
-
- do_exit(SIGKILL);
-
-@@ -405,8 +426,8 @@
- /* Since we're two-level, we don't need to do both
- * set_pgd and set_pmd (they do the same thing). If
- * we go three-level at some point, do the right thing
-- * with pgd_present and set_pgd here.
-- *
-+ * with pgd_present and set_pgd here.
-+ *
- * Also, since the vmalloc area is global, we don't
- * need to copy individual PTE's, it is enough to
- * copy the pgd pointer into the pte page of the
-diff -urN linux-2.6.19.2.old/arch/cris/mm/init.c linux-2.6.19.2.dev/arch/cris/mm/init.c
---- linux-2.6.19.2.old/arch/cris/mm/init.c 2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2.dev/arch/cris/mm/init.c 2006-06-25 17:00:10.000000000 +0200
-@@ -7,6 +7,15 @@
- * Authors: Bjorn Wesen (bjornw@axis.com)
- *
- * $Log: init.c,v $
-+ * Revision 1.14 2006/06/25 15:00:10 starvik
-+ * Merge of Linux 2.6.17
-+ *
-+ * Revision 1.13 2005/06/20 05:30:00 starvik
-+ * Remove unnecessary diff to kernel.org tree
-+ *
-+ * Revision 1.12 2004/08/16 12:37:24 starvik
-+ * Merge of Linux 2.6.8
-+ *
- * Revision 1.11 2004/05/28 09:28:56 starvik
- * Calculation of loops_per_usec moved because initalization order has changed
- * in Linux 2.6.