1 files changed, 0 insertions, 70 deletions
diff --git a/target/linux/ep93xx/patches-3.18/001-ep93xx_cpuinfo.patch b/target/linux/ep93xx/patches-3.18/001-ep93xx_cpuinfo.patch
deleted file mode 100644
index e9d87dfb5e..0000000000
--- a/target/linux/ep93xx/patches-3.18/001-ep93xx_cpuinfo.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-This patch puts the EP93xx chip revision and unique ID into /proc/cpuinfo.
-This is necessary to be able to set a unique MAC address for DHCP purposes
-by adding a line to /etc/network/interfaces:
-
-# Generate a unique locally-assigned MAC address from the CPU serial number
-pre-up ifconfig eth0 hw ether `sed -n 's/^Serial.* 000000/02/p' /proc/cpuinfo`
-
-It uses the chip revision reading code in the ep93xx-chip-revision patch.
-
-Really, this is wrong, since /proc/cpuinfo should report the revision and
-serial number of the ARM920T processor, while these are the rev and serial
-of the EP93xx SoC. In a future kernel (>2.6.34) there may be a new file
-/proc/socinfo for this information.
-
-	-martinwguy 14 May 2010
-
---- a/arch/arm/kernel/setup.c
-+++ b/arch/arm/kernel/setup.c
-@@ -57,6 +57,12 @@
- #include <asm/memblock.h>
- #include <asm/virt.h>
- 
-+#if defined(CONFIG_ARCH_EP93XX)
-+#include <asm/io.h>
-+#include <mach/platform.h>
-+#include <mach/ep93xx-regs.h>
-+#endif
-+
- #include "atags.h"
- 
- 
-@@ -1087,9 +1093,16 @@ static int c_show(struct seq_file *m, vo
- 	}
- 
- 	seq_printf(m, "Hardware\t: %s\n", machine_name);
-+#if defined(CONFIG_ARCH_EP93XX)
-+	seq_printf(m, "Revision\t: %04x\n",
-+	     ep93xx_chip_revision());
-+	seq_printf(m, "Serial\t\t: %016x\n",
-+	     *((unsigned int *)EP93XX_SECURITY_UNIQID));
-+#else
- 	seq_printf(m, "Revision\t: %04x\n", system_rev);
- 	seq_printf(m, "Serial\t\t: %08x%08x\n",
- 		   system_serial_high, system_serial_low);
-+#endif
- 
- 	return 0;
- }
---- a/arch/arm/mach-ep93xx/soc.h
-+++ b/arch/arm/mach-ep93xx/soc.h
-@@ -82,8 +82,6 @@
- #define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
- #define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
- 
--#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
--
- #define EP93XX_AAC_PHYS_BASE		EP93XX_APB_PHYS(0x00080000)
- #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
- 
---- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
-+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
-@@ -38,4 +38,8 @@
- #define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
- #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
- 
-+#define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
-+#define EP93XX_SECURITY_REG(x)		(EP93XX_SECURITY_BASE + (x))
-+#define EP93XX_SECURITY_UNIQID		EP93XX_SECURITY_REG(0x2440)
-+
- #endif