aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/danube
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/danube')
-rw-r--r--target/linux/danube/Makefile21
-rw-r--r--target/linux/danube/base-files/etc/config/network14
-rw-r--r--target/linux/danube/config-2.6.23190
-rw-r--r--target/linux/danube/files/arch/mips/danube/Kconfig36
-rw-r--r--target/linux/danube/files/arch/mips/danube/Makefile10
-rw-r--r--target/linux/danube/files/arch/mips/danube/dma-core.c758
-rw-r--r--target/linux/danube/files/arch/mips/danube/interrupt.c219
-rw-r--r--target/linux/danube/files/arch/mips/danube/pci.c319
-rw-r--r--target/linux/danube/files/arch/mips/danube/pmu.c45
-rw-r--r--target/linux/danube/files/arch/mips/danube/prom.c81
-rw-r--r--target/linux/danube/files/arch/mips/danube/reset.c66
-rw-r--r--target/linux/danube/files/arch/mips/danube/setup.c177
-rw-r--r--target/linux/danube/files/drivers/char/danube_eeprom.c541
-rw-r--r--target/linux/danube/files/drivers/char/danube_gpio.c442
-rw-r--r--target/linux/danube/files/drivers/char/danube_led.c197
-rw-r--r--target/linux/danube/files/drivers/char/danube_ssc.c1533
-rw-r--r--target/linux/danube/files/drivers/char/watchdog/danube_wdt.c287
-rw-r--r--target/linux/danube/files/drivers/mtd/maps/danube.c194
-rw-r--r--target/linux/danube/files/drivers/net/danube_mii0.c433
-rw-r--r--target/linux/danube/files/drivers/serial/danube_asc.c608
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube.h358
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_dma.h202
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_gpio.h42
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h42
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_irq.h66
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_mii0.h254
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_orig.h2021
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_pmu.h31
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_serial.h194
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/danube_wdt.h48
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h119
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h258
-rw-r--r--target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h547
-rw-r--r--target/linux/danube/files/include/asm-mips/mach-danube/irq.h8
-rw-r--r--target/linux/danube/image/Makefile34
-rw-r--r--target/linux/danube/patches/100-board.patch66
-rw-r--r--target/linux/danube/patches/110-drivers.patch93
-rw-r--r--target/linux/danube/patches/160-cfi-swap.patch15
-rw-r--r--target/linux/danube/series88
39 files changed, 0 insertions, 10657 deletions
diff --git a/target/linux/danube/Makefile b/target/linux/danube/Makefile
deleted file mode 100644
index d079d6dc09..0000000000
--- a/target/linux/danube/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2007 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mips
-BOARD:=danube
-BOARDNAME:=Infineon Danube
-FEATURES:=squashfs jffs2 broken
-LINUX_VERSION:=2.6.23
-
-include $(INCLUDE_DIR)/target.mk
-
-define Target/Description
- Build firmware images for Infineon Danube
-endef
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/danube/base-files/etc/config/network b/target/linux/danube/base-files/etc/config/network
deleted file mode 100644
index eb01cdd6c3..0000000000
--- a/target/linux/danube/base-files/etc/config/network
+++ /dev/null
@@ -1,14 +0,0 @@
-# Copyright (C) 2006 OpenWrt.org
-
-config interface loopback
- option ifname lo
- option proto static
- option ipaddr 127.0.0.1
- option netmask 255.0.0.0
-
-config interface lan
- option ifname eth0
- #option type bridge
- option proto static
- option ipaddr 192.168.45.110
- option netmask 255.255.255.0
diff --git a/target/linux/danube/config-2.6.23 b/target/linux/danube/config-2.6.23
deleted file mode 100644
index 887519324f..0000000000
--- a/target/linux/danube/config-2.6.23
+++ /dev/null
@@ -1,190 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_ATM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_BITREVERSE=y
-# CONFIG_BT is not set
-CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_DANUBE=y
-CONFIG_DANUBE_ASC_UART=y
-CONFIG_DANUBE_EEPROM=y
-CONFIG_DANUBE_GPIO=y
-CONFIG_DANUBE_LED=y
-CONFIG_DANUBE_MII0=y
-CONFIG_DANUBE_MII1=y
-CONFIG_DANUBE_SSC=y
-CONFIG_DANUBE_WDT=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_STD_PC_SERIAL_PORT=y
-# CONFIG_HOSTAP is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
-# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_DANUBE=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_START=0x0
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NO_IOPORT is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_RTC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_DANUBE=y
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USER_NS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/danube/files/arch/mips/danube/Kconfig b/target/linux/danube/files/arch/mips/danube/Kconfig
deleted file mode 100644
index 1c5ad72ca5..0000000000
--- a/target/linux/danube/files/arch/mips/danube/Kconfig
+++ /dev/null
@@ -1,36 +0,0 @@
-# copyright 2007 john crispin <blogic@openwrt.org>
-
-menu "Danube built-in"
-
-config DANUBE_ASC_UART
- bool "Danube asc uart"
- select SERIAL_CORE
- select SERIAL_CORE_CONSOLE
- default y
-
-config MTD_DANUBE
- bool "Danube flash map"
- default y
-
-config DANUBE_WDT
- bool "Danube watchdog"
- default y
-
-config DANUBE_LED
- bool "Danube led"
- default y
-
-config DANUBE_GPIO
- bool "Danube gpio"
- default y
-
-config DANUBE_SSC
- bool "Danube ssc"
- default y
-
-config DANUBE_EEPROM
- bool "Danube eeprom"
- default y
-
-endmenu
-
diff --git a/target/linux/danube/files/arch/mips/danube/Makefile b/target/linux/danube/files/arch/mips/danube/Makefile
deleted file mode 100644
index fed8f2f45e..0000000000
--- a/target/linux/danube/files/arch/mips/danube/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Copyright 2007 openwrt.org
-# John Crispin <blogic@openwrt.org>
-#
-# Makefile for Infineon Danube
-#
-obj-y := reset.o prom.o setup.o interrupt.o dma-core.o
-
-obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += kgdb_serial.o
diff --git a/target/linux/danube/files/arch/mips/danube/dma-core.c b/target/linux/danube/files/arch/mips/danube/dma-core.c
deleted file mode 100644
index 7d29dbdc02..0000000000
--- a/target/linux/danube/files/arch/mips/danube/dma-core.c
+++ /dev/null
@@ -1,758 +0,0 @@
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/stat.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/selection.h>
-#include <linux/kmod.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include <linux/errno.h>
-#include <asm/io.h>
-
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/danube/danube_dma.h>
-#include <asm/danube/danube_pmu.h>
-
-/*25 descriptors for each dma channel,4096/8/20=25.xx*/
-#define DANUBE_DMA_DESCRIPTOR_OFFSET 25
-
-#define MAX_DMA_DEVICE_NUM 6 /*max ports connecting to dma */
-#define MAX_DMA_CHANNEL_NUM 20 /*max dma channels */
-#define DMA_INT_BUDGET 100 /*budget for interrupt handling */
-#define DMA_POLL_COUNTER 4 /*fix me, set the correct counter value here! */
-
-extern void mask_and_ack_danube_irq (unsigned int irq_nr);
-extern void enable_danube_irq (unsigned int irq_nr);
-extern void disable_danube_irq (unsigned int irq_nr);
-
-u64 *g_desc_list;
-_dma_device_info dma_devs[MAX_DMA_DEVICE_NUM];
-_dma_channel_info dma_chan[MAX_DMA_CHANNEL_NUM];
-
-char global_device_name[MAX_DMA_DEVICE_NUM][20] =
- { {"PPE"}, {"DEU"}, {"SPI"}, {"SDIO"}, {"MCTRL0"}, {"MCTRL1"} };
-
-_dma_chan_map default_dma_map[MAX_DMA_CHANNEL_NUM] = {
- {"PPE", DANUBE_DMA_RX, 0, DANUBE_DMA_CH0_INT, 0},
- {"PPE", DANUBE_DMA_TX, 0, DANUBE_DMA_CH1_INT, 0},
- {"PPE", DANUBE_DMA_RX, 1, DANUBE_DMA_CH2_INT, 1},
- {"PPE", DANUBE_DMA_TX, 1, DANUBE_DMA_CH3_INT, 1},
- {"PPE", DANUBE_DMA_RX, 2, DANUBE_DMA_CH4_INT, 2},
- {"PPE", DANUBE_DMA_TX, 2, DANUBE_DMA_CH5_INT, 2},
- {"PPE", DANUBE_DMA_RX, 3, DANUBE_DMA_CH6_INT, 3},
- {"PPE", DANUBE_DMA_TX, 3, DANUBE_DMA_CH7_INT, 3},
- {"DEU", DANUBE_DMA_RX, 0, DANUBE_DMA_CH8_INT, 0},
- {"DEU", DANUBE_DMA_TX, 0, DANUBE_DMA_CH9_INT, 0},
- {"DEU", DANUBE_DMA_RX, 1, DANUBE_DMA_CH10_INT, 1},
- {"DEU", DANUBE_DMA_TX, 1, DANUBE_DMA_CH11_INT, 1},
- {"SPI", DANUBE_DMA_RX, 0, DANUBE_DMA_CH12_INT, 0},
- {"SPI", DANUBE_DMA_TX, 0, DANUBE_DMA_CH13_INT, 0},
- {"SDIO", DANUBE_DMA_RX, 0, DANUBE_DMA_CH14_INT, 0},
- {"SDIO", DANUBE_DMA_TX, 0, DANUBE_DMA_CH15_INT, 0},
- {"MCTRL0", DANUBE_DMA_RX, 0, DANUBE_DMA_CH16_INT, 0},
- {"MCTRL0", DANUBE_DMA_TX, 0, DANUBE_DMA_CH17_INT, 0},
- {"MCTRL1", DANUBE_DMA_RX, 1, DANUBE_DMA_CH18_INT, 1},
- {"MCTRL1", DANUBE_DMA_TX, 1, DANUBE_DMA_CH19_INT, 1}
-};
-
-_dma_chan_map *chan_map = default_dma_map;
-volatile u32 g_danube_dma_int_status = 0;
-volatile int g_danube_dma_in_process = 0;/*0=not in process,1=in process*/
-
-void do_dma_tasklet (unsigned long);
-DECLARE_TASKLET (dma_tasklet, do_dma_tasklet, 0);
-
-u8*
-common_buffer_alloc (int len, int *byte_offset, void **opt)
-{
- u8 *buffer = (u8 *) kmalloc (len * sizeof (u8), GFP_KERNEL);
-
- *byte_offset = 0;
-
- return buffer;
-}
-
-void
-common_buffer_free (u8 *dataptr, void *opt)
-{
- if (dataptr)
- kfree(dataptr);
-}
-
-void
-enable_ch_irq (_dma_channel_info *pCh)
-{
- int chan_no = (int)(pCh - dma_chan);
- int flag;
-
- local_irq_save(flag);
- writel(chan_no, DANUBE_DMA_CS);
- writel(0x4a, DANUBE_DMA_CIE);
- writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
- local_irq_restore(flag);
- enable_danube_irq(pCh->irq);
-}
-
-void
-disable_ch_irq (_dma_channel_info *pCh)
-{
- int flag;
- int chan_no = (int) (pCh - dma_chan);
-
- local_irq_save(flag);
- g_danube_dma_int_status &= ~(1 << chan_no);
- writel(chan_no, DANUBE_DMA_CS);
- writel(0, DANUBE_DMA_CIE);
- writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN);
- local_irq_restore(flag);
- mask_and_ack_danube_irq(pCh->irq);
-}
-
-void
-open_chan (_dma_channel_info *pCh)
-{
- int flag;
- int chan_no = (int)(pCh - dma_chan);
-
- local_irq_save(flag);
- writel(chan_no, DANUBE_DMA_CS);
- writel(readl(DANUBE_DMA_CCTRL) | 1, DANUBE_DMA_CCTRL);
- if(pCh->dir == DANUBE_DMA_RX)
- enable_ch_irq(pCh);
- local_irq_restore(flag);
-}
-
-void
-close_chan(_dma_channel_info *pCh)
-{
- int flag;
- int chan_no = (int) (pCh - dma_chan);
-
- local_irq_save(flag);
- writel(chan_no, DANUBE_DMA_CS);
- writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
- disable_ch_irq(pCh);
- local_irq_restore(flag);
-}
-
-void
-reset_chan (_dma_channel_info *pCh)
-{
- int chan_no = (int) (pCh - dma_chan);
-
- writel(chan_no, DANUBE_DMA_CS);
- writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
-}
-
-void
-rx_chan_intr_handler (int chan_no)
-{
- _dma_device_info *pDev = (_dma_device_info *)dma_chan[chan_no].dma_dev;
- _dma_channel_info *pCh = &dma_chan[chan_no];
- struct rx_desc *rx_desc_p;
- int tmp;
- int flag;
-
- /*handle command complete interrupt */
- rx_desc_p = (struct rx_desc*)pCh->desc_base + pCh->curr_desc;
- if (rx_desc_p->status.field.OWN == CPU_OWN
- && rx_desc_p->status.field.C
- && rx_desc_p->status.field.data_length < 1536){
- /*Every thing is correct, then we inform the upper layer */
- pDev->current_rx_chan = pCh->rel_chan_no;
- if(pDev->intr_handler)
- pDev->intr_handler(pDev, RCV_INT);
- pCh->weight--;
- } else {
- local_irq_save(flag);
- tmp = readl(DANUBE_DMA_CS);
- writel(chan_no, DANUBE_DMA_CS);
- writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS);
- writel(tmp, DANUBE_DMA_CS);
- g_danube_dma_int_status &= ~(1 << chan_no);
- local_irq_restore(flag);
- enable_danube_irq(dma_chan[chan_no].irq);
- }
-}
-
-inline void
-tx_chan_intr_handler (int chan_no)
-{
- _dma_device_info *pDev = (_dma_device_info*)dma_chan[chan_no].dma_dev;
- _dma_channel_info *pCh = &dma_chan[chan_no];
- int tmp;
- int flag;
-
- local_irq_save(flag);
- tmp = readl(DANUBE_DMA_CS);
- writel(chan_no, DANUBE_DMA_CS);
- writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS);
- writel(tmp, DANUBE_DMA_CS);
- g_danube_dma_int_status &= ~(1 << chan_no);
- local_irq_restore(flag);
- pDev->current_tx_chan = pCh->rel_chan_no;
- if (pDev->intr_handler)
- pDev->intr_handler(pDev, TRANSMIT_CPT_INT);
-}
-
-void
-do_dma_tasklet (unsigned long unused)
-{
- int i;
- int chan_no = 0;
- int budget = DMA_INT_BUDGET;
- int weight = 0;
- int flag;
-
- while (g_danube_dma_int_status)
- {
- if (budget-- < 0)
- {
- tasklet_schedule(&dma_tasklet);
- return;
- }
- chan_no = -1;
- weight = 0;
- for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
- {
- if ((g_danube_dma_int_status & (1 << i)) && dma_chan[i].weight > 0)
- {
- if (dma_chan[i].weight > weight)
- {
- chan_no = i;
- weight = dma_chan[chan_no].weight;
- }
- }
- }
-
- if (chan_no >= 0)
- {
- if (chan_map[chan_no].dir == DANUBE_DMA_RX)
- rx_chan_intr_handler(chan_no);
- else
- tx_chan_intr_handler(chan_no);
- } else {
- for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
- {
- dma_chan[i].weight = dma_chan[i].default_weight;
- }
- }
- }
-
- local_irq_save(flag);
- g_danube_dma_in_process = 0;
- if (g_danube_dma_int_status)
- {
- g_danube_dma_in_process = 1;
- tasklet_schedule(&dma_tasklet);
- }
- local_irq_restore(flag);
-}
-
-irqreturn_t
-dma_interrupt (int irq, void *dev_id)
-{
- _dma_channel_info *pCh;
- int chan_no = 0;
- int tmp;
-
- pCh = (_dma_channel_info*)dev_id;
- chan_no = (int)(pCh - dma_chan);
- if (chan_no < 0 || chan_no > 19)
- BUG();
-
- tmp = readl(DANUBE_DMA_IRNEN);
- writel(0, DANUBE_DMA_IRNEN);
- g_danube_dma_int_status |= 1 << chan_no;
- writel(tmp, DANUBE_DMA_IRNEN);
- mask_and_ack_danube_irq(irq);
-
- if (!g_danube_dma_in_process)
- {
- g_danube_dma_in_process = 1;
- tasklet_schedule(&dma_tasklet);
- }
-
- return IRQ_HANDLED;
-}
-
-_dma_device_info*
-dma_device_reserve (char *dev_name)
-{
- int i;
-
- for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
- {
- if (strcmp(dev_name, dma_devs[i].device_name) == 0)
- {
- if (dma_devs[i].reserved)
- return NULL;
- dma_devs[i].reserved = 1;
- break;
- }
- }
-
- return &dma_devs[i];
-}
-
-void
-dma_device_release (_dma_device_info *dev)
-{
- dev->reserved = 0;
-}
-
-void
-dma_device_register(_dma_device_info *dev)
-{
- int i, j;
- int chan_no = 0;
- u8 *buffer;
- int byte_offset;
- int flag;
- _dma_device_info *pDev;
- _dma_channel_info *pCh;
- struct rx_desc *rx_desc_p;
- struct tx_desc *tx_desc_p;
-
- for (i = 0; i < dev->max_tx_chan_num; i++)
- {
- pCh = dev->tx_chan[i];
- if (pCh->control == DANUBE_DMA_CH_ON)
- {
- chan_no = (int)(pCh - dma_chan);
- for (j = 0; j < pCh->desc_len; j++)
- {
- tx_desc_p = (struct tx_desc*)pCh->desc_base + j;
- memset(tx_desc_p, 0, sizeof(struct tx_desc));
- }
- local_irq_save(flag);
- writel(chan_no, DANUBE_DMA_CS);
- /*check if the descriptor length is changed */
- if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len)
- writel(pCh->desc_len, DANUBE_DMA_CDLEN);
-
- writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
- writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
- while (readl(DANUBE_DMA_CCTRL) & 2){};
- writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
- writel(0x30100, DANUBE_DMA_CCTRL); /*reset and enable channel,enable channel later */
- local_irq_restore(flag);
- }
- }
-
- for (i = 0; i < dev->max_rx_chan_num; i++)
- {
- pCh = dev->rx_chan[i];
- if (pCh->control == DANUBE_DMA_CH_ON)
- {
- chan_no = (int)(pCh - dma_chan);
-
- for (j = 0; j < pCh->desc_len; j++)
- {
- rx_desc_p = (struct rx_desc*)pCh->desc_base + j;
- pDev = (_dma_device_info*)(pCh->dma_dev);
- buffer = pDev->buffer_alloc(pCh->packet_size, &byte_offset, (void*)&(pCh->opt[j]));
- if (!buffer)
- break;
-
- dma_cache_inv((unsigned long) buffer, pCh->packet_size);
-
- rx_desc_p->Data_Pointer = (u32)CPHYSADDR((u32)buffer);
- rx_desc_p->status.word = 0;
- rx_desc_p->status.field.byte_offset = byte_offset;
- rx_desc_p->status.field.OWN = DMA_OWN;
- rx_desc_p->status.field.data_length = pCh->packet_size;
- }
-
- local_irq_save(flag);
- writel(chan_no, DANUBE_DMA_CS);
- /*check if the descriptor length is changed */
- if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len)
- writel(pCh->desc_len, DANUBE_DMA_CDLEN);
- writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
- writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
- while (readl(DANUBE_DMA_CCTRL) & 2){};
- writel(0x0a, DANUBE_DMA_CIE); /*fix me, should enable all the interrupts here? */
- writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
- writel(0x30000, DANUBE_DMA_CCTRL);
- local_irq_restore(flag);
- enable_danube_irq(dma_chan[chan_no].irq);
- }
- }
-}
-
-void
-dma_device_unregister (_dma_device_info *dev)
-{
- int i, j;
- int chan_no;
- _dma_channel_info *pCh;
- struct rx_desc *rx_desc_p;
- struct tx_desc *tx_desc_p;
- int flag;
-
- for (i = 0; i < dev->max_tx_chan_num; i++)
- {
- pCh = dev->tx_chan[i];
- if (pCh->control == DANUBE_DMA_CH_ON)
- {
- chan_no = (int)(dev->tx_chan[i] - dma_chan);
- local_irq_save (flag);
- writel(chan_no, DANUBE_DMA_CS);
- pCh->curr_desc = 0;
- pCh->prev_desc = 0;
- pCh->control = DANUBE_DMA_CH_OFF;
- writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */
- writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */
- writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
- while (readl(DANUBE_DMA_CCTRL) & 1) {};
- local_irq_restore (flag);
-
- for (j = 0; j < pCh->desc_len; j++)
- {
- tx_desc_p = (struct tx_desc*)pCh->desc_base + j;
- if ((tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
- || (tx_desc_p->status.field.OWN == DMA_OWN && tx_desc_p->status.field.data_length > 0))
- {
- dev->buffer_free ((u8 *) __va (tx_desc_p->Data_Pointer), (void*)pCh->opt[j]);
- }
- tx_desc_p->status.field.OWN = CPU_OWN;
- memset (tx_desc_p, 0, sizeof (struct tx_desc));
- }
- //TODO should free buffer that is not transferred by dma
- }
- }
-
- for (i = 0; i < dev->max_rx_chan_num; i++)
- {
- pCh = dev->rx_chan[i];
- chan_no = (int)(dev->rx_chan[i] - dma_chan);
- disable_danube_irq(pCh->irq);
-
- local_irq_save(flag);
- g_danube_dma_int_status &= ~(1 << chan_no);
- pCh->curr_desc = 0;
- pCh->prev_desc = 0;
- pCh->control = DANUBE_DMA_CH_OFF;
-
- writel(chan_no, DANUBE_DMA_CS);
- writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */
- writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */
- writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
- while (readl(DANUBE_DMA_CCTRL) & 1) {};
-
- local_irq_restore (flag);
- for (j = 0; j < pCh->desc_len; j++)
- {
- rx_desc_p = (struct rx_desc *) pCh->desc_base + j;
- if ((rx_desc_p->status.field.OWN == CPU_OWN
- && rx_desc_p->status.field.C)
- || (rx_desc_p->status.field.OWN == DMA_OWN
- && rx_desc_p->status.field.data_length > 0)) {
- dev->buffer_free ((u8 *)
- __va (rx_desc_p->
- Data_Pointer),
- (void *) pCh->opt[j]);
- }
- }
- }
-}
-
-int
-dma_device_read (struct dma_device_info *dma_dev, u8 ** dataptr, void **opt)
-{
- u8 *buf;
- int len;
- int byte_offset = 0;
- void *p = NULL;
- _dma_channel_info *pCh = dma_dev->rx_chan[dma_dev->current_rx_chan];
- struct rx_desc *rx_desc_p;
-
- /*get the rx data first */
- rx_desc_p = (struct rx_desc *) pCh->desc_base + pCh->curr_desc;
- if (!(rx_desc_p->status.field.OWN == CPU_OWN && rx_desc_p->status.field.C))
- {
- return 0;
- }
-
- buf = (u8 *) __va (rx_desc_p->Data_Pointer);
- *(u32*)dataptr = (u32)buf;
- len = rx_desc_p->status.field.data_length;
-
- if (opt)
- {
- *(int*)opt = (int)pCh->opt[pCh->curr_desc];
- }
-
- /*replace with a new allocated buffer */
- buf = dma_dev->buffer_alloc(pCh->packet_size, &byte_offset, &p);
-
- if (buf)
- {
- dma_cache_inv ((unsigned long) buf,
- pCh->packet_size);
- pCh->opt[pCh->curr_desc] = p;
- wmb ();
-
- rx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) buf);
- rx_desc_p->status.word = (DMA_OWN << 31) | ((byte_offset) << 23) | pCh->packet_size;
- wmb ();
- } else {
- *(u32 *) dataptr = 0;
- if (opt)
- *(int *) opt = 0;
- len = 0;
- }
-
- /*increase the curr_desc pointer */
- pCh->curr_desc++;
- if (pCh->curr_desc == pCh->desc_len)
- pCh->curr_desc = 0;
-
- return len;
-}
-
-int
-dma_device_write (struct dma_device_info *dma_dev, u8 * dataptr, int len, void *opt)
-{
- int flag;
- u32 tmp, byte_offset;
- _dma_channel_info *pCh;
- int chan_no;
- struct tx_desc *tx_desc_p;
- local_irq_save (flag);
-
- pCh = dma_dev->tx_chan[dma_dev->current_tx_chan];
- chan_no = (int)(pCh - (_dma_channel_info *) dma_chan);
-
- tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc;
- while (tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
- {
- dma_dev->buffer_free((u8 *) __va (tx_desc_p->Data_Pointer), pCh->opt[pCh->prev_desc]);
- memset(tx_desc_p, 0, sizeof (struct tx_desc));
- pCh->prev_desc = (pCh->prev_desc + 1) % (pCh->desc_len);
- tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc;
- }
- tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->curr_desc;
- /*Check whether this descriptor is available */
- if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C)
- {
- /*if not , the tell the upper layer device */
- dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
- local_irq_restore(flag);
- printk (KERN_INFO "%s %d: failed to write!\n", __func__, __LINE__);
-
- return 0;
- }
- pCh->opt[pCh->curr_desc] = opt;
- /*byte offset----to adjust the starting address of the data buffer, should be multiple of the burst length. */
- byte_offset = ((u32) CPHYSADDR ((u32) dataptr)) % ((dma_dev->tx_burst_len) * 4);
- dma_cache_wback ((unsigned long) dataptr, len);
- wmb ();
- tx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) dataptr) - byte_offset;
- wmb ();
- tx_desc_p->status.word = (DMA_OWN << 31) | DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | ((byte_offset) << 23) | len;
- wmb ();
-
- pCh->curr_desc++;
- if (pCh->curr_desc == pCh->desc_len)
- pCh->curr_desc = 0;
-
- /*Check whether this descriptor is available */
- tx_desc_p = (struct tx_desc *) pCh->desc_base + pCh->curr_desc;
- if (tx_desc_p->status.field.OWN == DMA_OWN)
- {
- /*if not , the tell the upper layer device */
- dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
- }
-
- writel(chan_no, DANUBE_DMA_CS);
- tmp = readl(DANUBE_DMA_CCTRL);
-
- if (!(tmp & 1))
- pCh->open (pCh);
-
- local_irq_restore (flag);
-
- return len;
-}
-
-int
-map_dma_chan(_dma_chan_map *map)
-{
- int i, j;
- int result;
-
- for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
- {
- strcpy(dma_devs[i].device_name, global_device_name[i]);
- }
-
- for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
- {
- dma_chan[i].irq = map[i].irq;
- result = request_irq(dma_chan[i].irq, dma_interrupt, SA_INTERRUPT, "dma-core", (void*)&dma_chan[i]);
- if (result)
- {
- printk("error, cannot get dma_irq!\n");
- free_irq(dma_chan[i].irq, (void *) &dma_interrupt);
-
- return -EFAULT;
- }
- }
-
- for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
- {
- dma_devs[i].num_tx_chan = 0; /*set default tx channel number to be one */
- dma_devs[i].num_rx_chan = 0; /*set default rx channel number to be one */
- dma_devs[i].max_rx_chan_num = 0;
- dma_devs[i].max_tx_chan_num = 0;
- dma_devs[i].buffer_alloc = &common_buffer_alloc;
- dma_devs[i].buffer_free = &common_buffer_free;
- dma_devs[i].intr_handler = NULL;
- dma_devs[i].tx_burst_len = 4;
- dma_devs[i].rx_burst_len = 4;
- if (i == 0)
- {
- writel(0, DANUBE_DMA_PS);
- writel(readl(DANUBE_DMA_PCTRL) | ((0xf << 8) | (1 << 6)), DANUBE_DMA_PCTRL); /*enable dma drop */
- }
-
- if (i == 1)
- {
- writel(1, DANUBE_DMA_PS);
- writel(0x14, DANUBE_DMA_PCTRL); /*deu port setting */
- }
-
- for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++)
- {
- dma_chan[j].byte_offset = 0;
- dma_chan[j].open = &open_chan;
- dma_chan[j].close = &close_chan;
- dma_chan[j].reset = &reset_chan;
- dma_chan[j].enable_irq = &enable_ch_irq;
- dma_chan[j].disable_irq = &disable_ch_irq;
- dma_chan[j].rel_chan_no = map[j].rel_chan_no;
- dma_chan[j].control = DANUBE_DMA_CH_OFF;
- dma_chan[j].default_weight = DANUBE_DMA_CH_DEFAULT_WEIGHT;
- dma_chan[j].weight = dma_chan[j].default_weight;
- dma_chan[j].curr_desc = 0;
- dma_chan[j].prev_desc = 0;
- }
-
- for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++)
- {
- if (strcmp(dma_devs[i].device_name, map[j].dev_name) == 0)
- {
- if (map[j].dir == DANUBE_DMA_RX)
- {
- dma_chan[j].dir = DANUBE_DMA_RX;
- dma_devs[i].max_rx_chan_num++;
- dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1] = &dma_chan[j];
- dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1]->pri = map[j].pri;
- dma_chan[j].dma_dev = (void*)&dma_devs[i];
- } else if(map[j].dir == DANUBE_DMA_TX)
- { /*TX direction */
- dma_chan[j].dir = DANUBE_DMA_TX;
- dma_devs[i].max_tx_chan_num++;
- dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1] = &dma_chan[j];
- dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1]->pri = map[j].pri;
- dma_chan[j].dma_dev = (void*)&dma_devs[i];
- } else {
- printk ("WRONG DMA MAP!\n");
- }
- }
- }
- }
-
- return 0;
-}
-
-void
-dma_chip_init(void)
-{
- int i;
-
- // enable DMA from PMU
- danube_pmu_enable(DANUBE_PMU_PWDCR_DMA);
-
- // reset DMA
- writel(readl(DANUBE_DMA_CTRL) | 1, DANUBE_DMA_CTRL);
-
- // diable all interrupts
- writel(0, DANUBE_DMA_IRNEN);
-
- for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
- {
- writel(i, DANUBE_DMA_CS);
- writel(0x2, DANUBE_DMA_CCTRL);
- writel(0x80000040, DANUBE_DMA_CPOLL);
- writel(readl(DANUBE_DMA_CCTRL) & ~0x1, DANUBE_DMA_CCTRL);
-
- }
-}
-
-int
-danube_dma_init (void)
-{
- int i;
-
- dma_chip_init();
- if (map_dma_chan(default_dma_map))
- BUG();
-
- g_desc_list = (u64*)KSEG1ADDR(__get_free_page(GFP_DMA));
-
- if (g_desc_list == NULL)
- {
- printk("no memory for desriptor\n");
- return -ENOMEM;
- }
-
- memset(g_desc_list, 0, PAGE_SIZE);
-
- for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
- {
- dma_chan[i].desc_base = (u32)g_desc_list + i * DANUBE_DMA_DESCRIPTOR_OFFSET * 8;
- dma_chan[i].curr_desc = 0;
- dma_chan[i].desc_len = DANUBE_DMA_DESCRIPTOR_OFFSET;
-
- writel(i, DANUBE_DMA_CS);
- writel((u32)CPHYSADDR(dma_chan[i].desc_base), DANUBE_DMA_CDBA);
- writel(dma_chan[i].desc_len, DANUBE_DMA_CDLEN);
- }
-
- return 0;
-}
-
-arch_initcall(danube_dma_init);
-
-void
-dma_cleanup(void)
-{
- int i;
-
- free_page(KSEG0ADDR((unsigned long) g_desc_list));
- for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
- free_irq(dma_chan[i].irq, (void*)&dma_interrupt);
-}
-
-EXPORT_SYMBOL (dma_device_reserve);
-EXPORT_SYMBOL (dma_device_release);
-EXPORT_SYMBOL (dma_device_register);
-EXPORT_SYMBOL (dma_device_unregister);
-EXPORT_SYMBOL (dma_device_read);
-EXPORT_SYMBOL (dma_device_write);
-
-MODULE_LICENSE ("GPL");
diff --git a/target/linux/danube/files/arch/mips/danube/interrupt.c b/target/linux/danube/files/arch/mips/danube/interrupt.c
deleted file mode 100644
index c266608ea2..0000000000
--- a/target/linux/danube/files/arch/mips/danube/interrupt.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * arch/mips/danube/interrupt.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 Wu Qi Ming infineon
- *
- * Rewrite of Infineon Danube code, thanks to infineon for the support,
- * software and hardware
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/irq_cpu.h>
-
-
-void
-disable_danube_irq (unsigned int irq_nr)
-{
- int i;
- u32 *danube_ier = DANUBE_ICU_IM0_IER;
-
- irq_nr -= INT_NUM_IRQ0;
- for (i = 0; i <= 4; i++)
- {
- if (irq_nr < INT_NUM_IM_OFFSET){
- writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier);
- return;
- }
- danube_ier += DANUBE_ICU_OFFSET;
- irq_nr -= INT_NUM_IM_OFFSET;
- }
-}
-EXPORT_SYMBOL (disable_danube_irq);
-
-void
-mask_and_ack_danube_irq (unsigned int irq_nr)
-{
- int i;
- u32 *danube_ier = DANUBE_ICU_IM0_IER;
- u32 *danube_isr = DANUBE_ICU_IM0_ISR;
-
- irq_nr -= INT_NUM_IRQ0;
- for (i = 0; i <= 4; i++)
- {
- if (irq_nr < INT_NUM_IM_OFFSET)
- {
- writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier);
- writel((1 << irq_nr ), danube_isr);
- return;
- }
- danube_ier += DANUBE_ICU_OFFSET;
- danube_isr += DANUBE_ICU_OFFSET;
- irq_nr -= INT_NUM_IM_OFFSET;
- }
-}
-EXPORT_SYMBOL (mask_and_ack_danube_irq);
-
-void
-enable_danube_irq (unsigned int irq_nr)
-{
- int i;
- u32 *danube_ier = DANUBE_ICU_IM0_IER;
-
- irq_nr -= INT_NUM_IRQ0;
- for (i = 0; i <= 4; i++)
- {
- if (irq_nr < INT_NUM_IM_OFFSET)
- {
- writel(readl(danube_ier) | (1 << irq_nr ), danube_ier);
- return;
- }
- danube_ier += DANUBE_ICU_OFFSET;
- irq_nr -= INT_NUM_IM_OFFSET;
- }
-}
-EXPORT_SYMBOL (enable_danube_irq);
-
-static unsigned int
-startup_danube_irq (unsigned int irq)
-{
- enable_danube_irq (irq);
- return 0;
-}
-
-static void
-end_danube_irq (unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
- enable_danube_irq (irq);
-}
-
-static struct hw_interrupt_type danube_irq_type = {
- "DANUBE",
- .startup = startup_danube_irq,
- .enable = enable_danube_irq,
- .disable = disable_danube_irq,
- .unmask = enable_danube_irq,
- .ack = end_danube_irq,
- .mask = disable_danube_irq,
- .mask_ack = mask_and_ack_danube_irq,
- .end = end_danube_irq,
-};
-
-static inline int
-ls1bit32(unsigned long x)
-{
- __asm__ (
- " .set push \n"
- " .set mips32 \n"
- " clz %0, %1 \n"
- " .set pop \n"
- : "=r" (x)
- : "r" (x));
-
- return 31 - x;
-}
-
-void
-danube_hw_irqdispatch (int module)
-{
- u32 irq;
-
- irq = readl(DANUBE_ICU_IM0_IOSR + (module * DANUBE_ICU_OFFSET));
- if (irq == 0)
- return;
-
- irq = ls1bit32 (irq);
- do_IRQ ((int) irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
-
- if ((irq == 22) && (module == 0)){
- writel(readl(DANUBE_EBU_PCC_ISTAT) | 0x10, DANUBE_EBU_PCC_ISTAT);
- }
-}
-
-asmlinkage void
-plat_irq_dispatch (void)
-{
- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
- unsigned int i;
-
- if (pending & CAUSEF_IP7){
- do_IRQ(MIPS_CPU_TIMER_IRQ);
- goto out;
- } else {
- for (i = 0; i < 5; i++)
- {
- if (pending & (CAUSEF_IP2 << i))
- {
- danube_hw_irqdispatch(i);
- goto out;
- }
- }
- }
- printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
-
-out:
- return;
-}
-
-static struct irqaction cascade = {
- .handler = no_action,
- .flags = IRQF_DISABLED,
- .name = "cascade",
-};
-
-void __init
-arch_init_irq(void)
-{
- int i;
-
- for (i = 0; i < 5; i++)
- {
- writel(0, DANUBE_ICU_IM0_IER + (i * DANUBE_ICU_OFFSET));
- }
-
- mips_cpu_irq_init();
-
- for (i = 2; i <= 6; i++)
- {
- setup_irq(i, &cascade);
- }
-
- for (i = INT_NUM_IRQ0; i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
- {
-#if 0
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
-#endif
- set_irq_chip_and_handler(i, &danube_irq_type, handle_level_irq);
- }
-
- set_c0_status (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
-}
diff --git a/target/linux/danube/files/arch/mips/danube/pci.c b/target/linux/danube/files/arch/mips/danube/pci.c
deleted file mode 100644
index 1896336d81..0000000000
--- a/target/linux/danube/files/arch/mips/danube/pci.c
+++ /dev/null
@@ -1,319 +0,0 @@
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/addrspace.h>
-#include <linux/vmalloc.h>
-
-#define DANUBE_PCI_MEM_BASE 0x18000000
-#define DANUBE_PCI_MEM_SIZE 0x02000000
-#define DANUBE_PCI_IO_BASE 0x1AE00000
-#define DANUBE_PCI_IO_SIZE 0x00200000
-
-#define DANUBE_PCI_CFG_BUSNUM_SHF 16
-#define DANUBE_PCI_CFG_DEVNUM_SHF 11
-#define DANUBE_PCI_CFG_FUNNUM_SHF 8
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
-static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
-
-struct pci_ops danube_pci_ops = {
- .read = danube_pci_read_config_dword,
- .write = danube_pci_write_config_dword
-};
-
-static struct resource pci_io_resource = {
- .name = "io pci IO space",
- .start = DANUBE_PCI_IO_BASE,
- .end = DANUBE_PCI_IO_BASE + DANUBE_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
- .name = "ext pci memory space",
- .start = DANUBE_PCI_MEM_BASE,
- .end = DANUBE_PCI_MEM_BASE + DANUBE_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM
-};
-
-static struct pci_controller danube_pci_controller = {
- .pci_ops = &danube_pci_ops,
- .mem_resource = &pci_mem_resource,
- .mem_offset = 0x00000000UL,
- .io_resource = &pci_io_resource,
- .io_offset = 0x00000000UL,
-};
-
-static u32 danube_pci_mapped_cfg;
-
-static int
-danube_pci_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
-{
- unsigned long cfg_base;
- unsigned long flags;
-
- u32 temp;
-
- /* Danube support slot from 0 to 15 */
- /* dev_fn 0&0x68 (AD29) is danube itself */
- if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
- || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
- return 1;
-
- local_irq_save(flags);
-
- cfg_base = danube_pci_mapped_cfg;
- cfg_base |= (bus->number << DANUBE_PCI_CFG_BUSNUM_SHF) | (devfn <<
- DANUBE_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
-
- /* Perform access */
- if (access_type == PCI_ACCESS_WRITE)
- {
-#ifdef CONFIG_DANUBE_PCI_HW_SWAP
- writel(swab32(*data), ((u32*)cfg_base));
-#else
- writel(*data, ((u32*)cfg_base));
-#endif
- } else {
- *data = readl(((u32*)(cfg_base)));
-#ifdef CONFIG_DANUBE_PCI_HW_SWAP
- *data = swab32(*data);
-#endif
- }
- wmb();
-
- /* clean possible Master abort */
- cfg_base = (danube_pci_mapped_cfg | (0x0 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
- temp = readl(((u32*)(cfg_base)));
-#ifdef CONFIG_DANUBE_PCI_HW_SWAP
- temp = swab32 (temp);
-#endif
- cfg_base = (danube_pci_mapped_cfg | (0x68 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
- writel(temp, ((u32*)cfg_base));
-
- local_irq_restore(flags);
-
- if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
- return 1;
-
- return 0;
-}
-
-static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
-{
- u32 data = 0;
-
- if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
-
- if (size == 4)
- {
- data = val;
- } else {
- if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- }
-
- if (danube_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-int pcibios_plat_dev_init(struct pci_dev *dev){
- u8 pin;
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-
- switch(pin) {
- case 0:
- break;
- case 1:
- //falling edge level triggered:0x4, low level:0xc, rising edge:0x2
- printk("%s:%s[%d] %08X \n", __FILE__, __func__, __LINE__, dev->irq);
- writel(readl(DANUBE_EBU_PCC_CON) | 0xc, DANUBE_EBU_PCC_CON);
- writel(readl(DANUBE_EBU_PCC_IEN) | 0x10, DANUBE_EBU_PCC_IEN);
- break;
- case 2:
- case 3:
- case 4:
- printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
- default:
- printk ("WARNING: invalid interrupt pin %d\n", pin);
- return 1;
- }
-
- return 0;
-}
-
-static void __init danube_pci_startup (void){
- /*initialize the first PCI device--danube itself */
- u32 temp_buffer;
- /*TODO: trigger reset */
- writel(readl(DANUBE_CGU_IFCCR) & ~0xf00000, DANUBE_CGU_IFCCR);
- writel(readl(DANUBE_CGU_IFCCR) | 0x800000, DANUBE_CGU_IFCCR);
- /* PCIS of IF_CLK of CGU : 1 =>PCI Clock output
- 0 =>clock input
- PADsel of PCI_CR of CGU : 1 =>From CGU
- : 0 =>From pad
- */
- writel(readl(DANUBE_CGU_IFCCR) | (1 << 16), DANUBE_CGU_IFCCR);
- writel((1 << 31) | (1 << 30), DANUBE_CGU_PCICR);
-
- /* prepare GPIO */
- /* PCI_RST: P1.5 ALT 01 */
- //pliu20060613: start
- writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT);
- writel(readl(DANUBE_GPIO_P1_OD) | (1 << 5), DANUBE_GPIO_P1_OD);
- writel(readl(DANUBE_GPIO_P1_DIR) | (1 << 5), DANUBE_GPIO_P1_DIR);
- writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL1);
- writel(readl(DANUBE_GPIO_P1_ALTSEL0) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL0);
- //pliu20060613: end
- /* PCI_REQ1: P1.13 ALT 01 */
- /* PCI_GNT1: P1.14 ALT 01 */
- writel(readl(DANUBE_GPIO_P1_DIR) & ~0x2000, DANUBE_GPIO_P1_DIR);
- writel(readl(DANUBE_GPIO_P1_DIR) | 0x4000, DANUBE_GPIO_P1_DIR);
- writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~0x6000, DANUBE_GPIO_P1_ALTSEL1);
- writel(readl(DANUBE_GPIO_P1_ALTSEL0) | 0x6000, DANUBE_GPIO_P1_ALTSEL0);
- /* PCI_REQ2: P1.15 ALT 10 */
- /* PCI_GNT2: P1.7 ALT 10 */
-
-
- /* enable auto-switching between PCI and EBU */
- writel(0xa, PCI_CR_CLK_CTRL);
- /* busy, i.e. configuration is not done, PCI access has to be retried */
- writel(readl(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
- wmb ();
- /* BUS Master/IO/MEM access */
- writel(readl(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
-
- temp_buffer = readl(PCI_CR_PC_ARB);
- /* enable external 2 PCI masters */
- temp_buffer &= (~(0xf << 16));
- /* enable internal arbiter */
- temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
- /* enable internal PCI master reqest */
- temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
-
- /* enable EBU reqest */
- temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
-
- /* enable all external masters request */
- temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
- writel(temp_buffer, PCI_CR_PC_ARB);
-
- wmb ();
-
- /* FPI ==> PCI MEM address mapping */
- /* base: 0xb8000000 == > 0x18000000 */
- /* size: 8x4M = 32M */
- writel(0x18000000, PCI_CR_FCI_ADDR_MAP0);
- writel(0x18400000, PCI_CR_FCI_ADDR_MAP1);
- writel(0x18800000, PCI_CR_FCI_ADDR_MAP2);
- writel(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
- writel(0x19000000, PCI_CR_FCI_ADDR_MAP4);
- writel(0x19400000, PCI_CR_FCI_ADDR_MAP5);
- writel(0x19800000, PCI_CR_FCI_ADDR_MAP6);
- writel(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
-
- /* FPI ==> PCI IO address mapping */
- /* base: 0xbAE00000 == > 0xbAE00000 */
- /* size: 2M */
- writel(0xbae00000, PCI_CR_FCI_ADDR_MAP11hg);
-
- /* PCI ==> FPI address mapping */
- /* base: 0x0 ==> 0x0 */
- /* size: 32M */
- /* BAR1 32M map to SDR address */
- writel(0x0e000008, PCI_CR_BAR11MASK);
- writel(0, PCI_CR_PCI_ADDR_MAP11);
- writel(0, PCI_CS_BASE_ADDR1);
-#ifdef CONFIG_DANUBE_PCI_HW_SWAP
- /* both TX and RX endian swap are enabled */
- DANUBE_PCI_REG32 (PCI_CR_PCI_EOI_REG) |= 3;
- wmb ();
-#endif
- /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
- writel(readl(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
- writel(readl(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
- /*use 8 dw burse length */
- writel(0x303, PCI_CR_FCI_BURST_LENGTH);
-
- writel(readl(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
- wmb();
- writel(readl(DANUBE_GPIO_P1_OUT) & ~(1 << 5), DANUBE_GPIO_P1_OUT);
- wmb();
- mdelay (1);
- writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT);
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
- printk("\n\n\n%s:%s[%d] %d %d\n", __FILE__, __func__, __LINE__, slot, pin);
- switch (slot) {
- case 13:
- /* IDSEL = AD29 --> USB Host Controller */
- return (INT_NUM_IM1_IRL0 + 17);
- case 14:
- /* IDSEL = AD30 --> mini PCI connector */
- //return (INT_NUM_IM1_IRL0 + 14);
- return (INT_NUM_IM0_IRL0 + 22);
- default:
- printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
- return 0;
- }
-}
-
-int pcibios_init(void){
- extern int pci_probe_only;
-
- pci_probe_only = 0;
- printk ("PCI: Probing PCI hardware on host bus 0.\n");
-
- danube_pci_startup ();
-
- // DANUBE_PCI_REG32(PCI_CR_CLK_CTRL_REG) &= (~8);
- danube_pci_mapped_cfg = ioremap_nocache(0x17000000, 0x800 * 16);
- printk("Danube PCI mapped to 0x%08X\n", (unsigned long)danube_pci_mapped_cfg);
-
- danube_pci_controller.io_map_base = (unsigned long)ioremap(DANUBE_PCI_IO_BASE, DANUBE_PCI_IO_SIZE - 1);
-
- printk("Danube PCI I/O mapped to 0x%08X\n", (unsigned long)danube_pci_controller.io_map_base);
-
- register_pci_controller(&danube_pci_controller);
-
- return 0;
-}
-
-arch_initcall(pcibios_init);
diff --git a/target/linux/danube/files/arch/mips/danube/pmu.c b/target/linux/danube/files/arch/mips/danube/pmu.c
deleted file mode 100644
index 5bb66dbe5b..0000000000
--- a/target/linux/danube/files/arch/mips/danube/pmu.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * arch/mips/danube/pmu.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <asm/danube/danube.h>
-
-void
-danube_pmu_enable (unsigned int module)
-{
- int err = 1000000;
-
- writel(readl(DANUBE_PMU_PWDCR) & ~module, DANUBE_PMU_PWDCR);
- while (--err && (readl(DANUBE_PMU_PWDSR) & module)) {}
-
- if (!err)
- panic("activating PMU module failed!");
-}
-EXPORT_SYMBOL(danube_pmu_enable);
-
-void
-danube_pmu_disable (unsigned int module)
-{
- writel(readl(DANUBE_PMU_PWDCR) | module, DANUBE_PMU_PWDCR);
-}
-EXPORT_SYMBOL(danube_pmu_disable);
diff --git a/target/linux/danube/files/arch/mips/danube/prom.c b/target/linux/danube/files/arch/mips/danube/prom.c
deleted file mode 100644
index efb06120ef..0000000000
--- a/target/linux/danube/files/arch/mips/danube/prom.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/mips/danube/prom.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 Wu Qi Ming infineon
- *
- * Rewrite of Infineon Danube code, thanks to infineon for the support,
- * software and hardware
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <asm/bootinfo.h>
-#include <asm/danube/danube.h>
-
-static char buf[1024];
-
-void
-prom_free_prom_memory (void)
-{
-}
-
-const char *
-get_system_type (void)
-{
- return BOARD_SYSTEM_TYPE;
-}
-
-void
-prom_putchar (char c)
-{
- while ((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF);
-
- if (c == '\n')
- writel('\r', DANUBE_ASC1_TBUF);
- writel(c, DANUBE_ASC1_TBUF);
-}
-
-void
-prom_printf (const char * fmt, ...)
-{
- va_list args;
- int l;
- char *p, *buf_end;
-
- va_start(args, fmt);
- l = vsprintf(buf, fmt, args);
- va_end(args);
- buf_end = buf + l;
-
- for (p = buf; p < buf_end; p++)
- {
- prom_putchar(*p);
- }
-}
-
-void __init
-prom_init(void)
-{
- mips_machgroup = MACH_GROUP_DANUBE;
- mips_machtype = MACH_INFINEON_DANUBE;
-
- strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
- add_memory_region (0x00000000, 0x2000000, BOOT_MEM_RAM);
-}
diff --git a/target/linux/danube/files/arch/mips/danube/reset.c b/target/linux/danube/files/arch/mips/danube/reset.c
deleted file mode 100644
index cb1793ca77..0000000000
--- a/target/linux/danube/files/arch/mips/danube/reset.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * arch/mips/danube/prom.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- *
- * Rewrite of Infineon Danube code, thanks to infineon for the support,
- * software and hardware
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pm.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/danube/danube.h>
-
-static void
-danube_machine_restart (char *command)
-{
- printk (KERN_NOTICE "System restart\n");
- local_irq_disable ();
-
- writel(readl(DANUBE_RCU_REQ) | DANUBE_RST_ALL, DANUBE_RCU_REQ);
- for (;;);
-}
-
-static void
-danube_machine_halt (void)
-{
- printk (KERN_NOTICE "System halted.\n");
- local_irq_disable ();
- for (;;);
-}
-
-static void
-danube_machine_power_off (void)
-{
- printk (KERN_NOTICE "Please turn off the power now.\n");
- local_irq_disable ();
- for (;;);
-}
-
-void
-danube_reboot_setup (void)
-{
- _machine_restart = danube_machine_restart;
- _machine_halt = danube_machine_halt;
- pm_power_off = danube_machine_power_off;
-}
diff --git a/target/linux/danube/files/arch/mips/danube/setup.c b/target/linux/danube/files/arch/mips/danube/setup.c
deleted file mode 100644
index 60b0ce28e7..0000000000
--- a/target/linux/danube/files/arch/mips/danube/setup.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * arch/mips/danube/setup.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2004 peng.liu@infineon.com
- *
- * Rewrite of Infineon Danube code, thanks to infineon for the support,
- * software and hardware
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/init.h>
-
-#include <asm/time.h>
-#include <asm/traps.h>
-#include <asm/cpu.h>
-#include <asm/irq.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/danube/danube_pmu.h>
-
-static unsigned int r4k_offset; /* Amount to increment compare reg each time */
-static unsigned int r4k_cur; /* What counter should be at next timer irq */
-
-extern void danube_reboot_setup (void);
-void prom_printf (const char * fmt, ...);
-
-void
-__init bus_error_init (void)
-{
- /* nothing yet */
-}
-
-unsigned int
-danube_get_ddr_hz (void)
-{
- switch (readl(DANUBE_CGU_SYS) & 0x3)
- {
- case 0:
- return CLOCK_167M;
- case 1:
- return CLOCK_133M;
- case 2:
- return CLOCK_111M;
- }
- return CLOCK_83M;
-}
-EXPORT_SYMBOL(danube_get_ddr_hz);
-
-unsigned int
-danube_get_cpu_hz (void)
-{
- unsigned int ddr_clock = danube_get_ddr_hz();
- switch (readl(DANUBE_CGU_SYS) & 0xc)
- {
- case 0:
- return CLOCK_333M;
- case 4:
- return ddr_clock;
- }
- return ddr_clock << 1;
-}
-EXPORT_SYMBOL(danube_get_cpu_hz);
-
-unsigned int
-danube_get_fpi_hz (void)
-{
- unsigned int ddr_clock = danube_get_ddr_hz();
- if (readl(DANUBE_CGU_SYS) & 0x40)
- {
- return ddr_clock >> 1;
- }
- return ddr_clock;
-}
-EXPORT_SYMBOL(danube_get_fpi_hz);
-
-unsigned int
-danube_get_cpu_ver (void)
-{
- return readl(DANUBE_MCD_CHIPID) & 0xFFFFF000;
-}
-EXPORT_SYMBOL(danube_get_cpu_ver);
-
-void
-danube_time_init (void)
-{
- mips_hpt_frequency = danube_get_cpu_hz() / 2;
- r4k_offset = mips_hpt_frequency / HZ;
- printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
- printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset);
-}
-
-int
-danube_be_handler(struct pt_regs *regs, int is_fixup)
-{
- /*TODO*/
- printk(KERN_ERR "TODO: BUS error\n");
-
- return MIPS_BE_FATAL;
-}
-
-/* ISR GPTU Timer 6 for high resolution timer */
-static irqreturn_t
-danube_timer6_interrupt(int irq, void *dev_id)
-{
- timer_interrupt(DANUBE_TIMER6_INT, NULL);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction hrt_irqaction = {
- .handler = danube_timer6_interrupt,
- .flags = IRQF_DISABLED,
- .name = "hrt",
-};
-
-void __init
-plat_timer_setup (struct irqaction *irq)
-{
- unsigned int retval;
-
- setup_irq(MIPS_CPU_TIMER_IRQ, irq);
-
- r4k_cur = (read_c0_count() + r4k_offset);
- write_c0_compare(r4k_cur);
-
- danube_pmu_enable(DANUBE_PMU_PWDCR_GPT | DANUBE_PMU_PWDCR_FPI);
-
- writel(0x100, DANUBE_GPTU_GPT_CLC);
-
- writel(0xffff, DANUBE_GPTU_GPT_CAPREL);
- writel(0x80C0, DANUBE_GPTU_GPT_T6CON);
-
- retval = setup_irq(DANUBE_TIMER6_INT, &hrt_irqaction);
-
- if (retval)
- {
- prom_printf("reqeust_irq failed %d. HIGH_RES_TIMER is diabled\n", DANUBE_TIMER6_INT);
- }
-}
-
-void __init
-plat_mem_setup (void)
-{
- u32 status;
- prom_printf("This %s has a cpu rev of 0x%X\n", BOARD_SYSTEM_TYPE, danube_get_cpu_ver());
-
- //TODO WHY ???
- /* clear RE bit*/
- status = read_c0_status();
- status &= (~(1<<25));
- write_c0_status(status);
-
- danube_reboot_setup();
- board_time_init = danube_time_init;
- board_be_handler = &danube_be_handler;
-
- ioport_resource.start = IOPORT_RESOURCE_START;
- ioport_resource.end = IOPORT_RESOURCE_END;
- iomem_resource.start = IOMEM_RESOURCE_START;
- iomem_resource.end = IOMEM_RESOURCE_END;
-}
diff --git a/target/linux/danube/files/drivers/char/danube_eeprom.c b/target/linux/danube/files/drivers/char/danube_eeprom.c
deleted file mode 100644
index 1835f2776e..0000000000
--- a/target/linux/danube/files/drivers/char/danube_eeprom.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * This driver was originally based on the INCA-IP driver, but due to
- * fundamental conceptual drawbacks there has been changed a lot.
- *
- * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de>
- * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies.
- *
- * Copyright (C) 2006 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#define IFAP_EEPROM_DRV_VERSION "0.0.1"
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/danube/ifx_ssc_defines.h>
-#include <asm/danube/ifx_ssc.h>
-
-/* allow the user to set the major device number */
-static int danube_eeprom_maj = 0;
-
-extern int ifx_ssc_init (void);
-extern int ifx_ssc_open (struct inode *inode, struct file *filp);
-extern int ifx_ssc_close (struct inode *inode, struct file *filp);
-extern void ifx_ssc_cleanup_module (void);
-extern int ifx_ssc_ioctl (struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long data);
-extern ssize_t ifx_ssc_kwrite (int port, const char *kbuf, size_t len);
-extern ssize_t ifx_ssc_kread (int port, char *kbuf, size_t len);
-
-extern int ifx_ssc_cs_low (unsigned int pin);
-extern int ifx_ssc_cs_high (unsigned int pin);
-extern int ifx_ssc_txrx (char *tx_buf, unsigned int tx_len, char *rx_buf, unsigned int rx_len);
-extern int ifx_ssc_tx (char *tx_buf, unsigned int tx_len);
-extern int ifx_ssc_rx (char *rx_buf, unsigned int rx_len);
-
-#define EEPROM_CS IFX_SSC_WHBGPOSTAT_OUT0_POS
-
-/* commands for EEPROM, x25160, x25140 */
-#define EEPROM_WREN ((unsigned char)0x06)
-#define EEPROM_WRDI ((unsigned char)0x04)
-#define EEPROM_RDSR ((unsigned char)0x05)
-#define EEPROM_WRSR ((unsigned char)0x01)
-#define EEPROM_READ ((unsigned char)0x03)
-#define EEPROM_WRITE ((unsigned char)0x02)
-#define EEPROM_PAGE_SIZE 4
-#define EEPROM_SIZE 512
-
-static int
-eeprom_rdsr (void)
-{
- int ret = 0;
- unsigned char cmd = EEPROM_RDSR;
- unsigned long flag;
- char status;
-
- local_irq_save(flag);
-
- if ((ret = ifx_ssc_cs_low(EEPROM_CS)) == 0)
- if ((ret = ifx_ssc_txrx(&cmd, 1, &status, 1)) >= 0)
- ret = status & 1;
-
- ifx_ssc_cs_high(EEPROM_CS);
- local_irq_restore(flag);
-
- return ret;
-}
-
-void
-eeprom_wip_over (void)
-{
- while (eeprom_rdsr())
- printk("waiting for eeprom\n");
-}
-
-static int
-eeprom_wren (void)
-{
- unsigned char cmd = EEPROM_WREN;
- int ret = 0;
- unsigned long flag;
-
- local_irq_save(flag);
- if ((ret = ifx_ssc_cs_low(EEPROM_CS)) == 0)
- if ((ret = ifx_ssc_tx(&cmd, 1)) >= 0)
- ret = 0;
-
- ifx_ssc_cs_high(EEPROM_CS);
- local_irq_restore(flag);
-
- if (!ret)
- eeprom_wip_over();
-
- return ret;
-}
-
-static int
-eeprom_wrsr (void)
-{
- int ret = 0;
- unsigned char cmd[2];
- unsigned long flag;
-
- cmd[0] = EEPROM_WRSR;
- cmd[1] = 0;
-
- if ((ret = eeprom_wren()))
- {
- printk ("eeprom_wren fails\n");
- goto out1;
- }
-
- local_irq_save(flag);
-
- if ((ret = ifx_ssc_cs_low(EEPROM_CS)))
- goto out;
-
- if ((ret = ifx_ssc_tx(cmd, 2)) < 0) {
- ifx_ssc_cs_high(EEPROM_CS);
- goto out;
- }
-
- if ((ret = ifx_ssc_cs_low(EEPROM_CS)))
- goto out;
-
- local_irq_restore(flag);
- eeprom_wip_over();
-
- return ret;
-
-out:
- local_irq_restore (flag);
- eeprom_wip_over ();
-
-out1:
- return ret;
-}
-
-static int
-eeprom_read (unsigned int addr, unsigned char *buf, unsigned int len)
-{
- int ret = 0;
- unsigned char write_buf[2];
- unsigned int eff = 0;
- unsigned long flag;
-
- while (1)
- {
- eeprom_wip_over();
- eff = EEPROM_PAGE_SIZE - (addr % EEPROM_PAGE_SIZE);
- eff = (eff < len) ? eff : len;
- local_irq_save(flag);
-
- if ((ret = ifx_ssc_cs_low(EEPROM_CS)) < 0)
- goto out;
-
- write_buf[0] = EEPROM_READ | ((unsigned char) ((addr & 0x100) >> 5));
- write_buf[1] = (addr & 0xff);
-
- if ((ret = ifx_ssc_txrx (write_buf, 2, buf, eff)) != eff)
- {
- printk("ssc_txrx fails %d\n", ret);
- ifx_ssc_cs_high (EEPROM_CS);
- goto out;
- }
-
- buf += ret;
- len -= ret;
- addr += ret;
-
- if ((ret = ifx_ssc_cs_high(EEPROM_CS)))
- goto out;
-
- local_irq_restore(flag);
-
- if (len <= 0)
- goto out2;
- }
-
-out:
- local_irq_restore (flag);
-out2:
- return ret;
-}
-
-static int
-eeprom_write (unsigned int addr, unsigned char *buf, unsigned int len)
-{
- int ret = 0;
- unsigned int eff = 0;
- unsigned char write_buf[2];
- int i;
- unsigned char rx_buf[EEPROM_PAGE_SIZE];
-
- while (1)
- {
- eeprom_wip_over();
-
- if ((ret = eeprom_wren()))
- {
- printk("eeprom_wren fails\n");
- goto out;
- }
-
- write_buf[0] = EEPROM_WRITE | ((unsigned char) ((addr & 0x100) >> 5));
- write_buf[1] = (addr & 0xff);
-
- eff = EEPROM_PAGE_SIZE - (addr % EEPROM_PAGE_SIZE);
- eff = (eff < len) ? eff : len;
-
- printk("EEPROM Write:\n");
- for (i = 0; i < eff; i++) {
- printk("%2x ", buf[i]);
- if ((i % 16) == 15)
- printk("\n");
- }
- printk("\n");
-
- if ((ret = ifx_ssc_cs_low(EEPROM_CS)))
- goto out;
-
- if ((ret = ifx_ssc_tx (write_buf, 2)) < 0)
- {
- printk("ssc_tx fails %d\n", ret);
- ifx_ssc_cs_high(EEPROM_CS);
- goto out;
- }
-
- if ((ret = ifx_ssc_tx (buf, eff)) != eff)
- {
- printk("ssc_tx fails %d\n", ret);
- ifx_ssc_cs_high(EEPROM_CS);
- goto out;
- }
-
- buf += ret;
- len -= ret;
- addr += ret;
-
- if ((ret = ifx_ssc_cs_high (EEPROM_CS)))
- goto out;
-
- printk ("<==");
- eeprom_read((addr - eff), rx_buf, eff);
- for (i = 0; i < eff; i++)
- {
- printk ("[%x]", rx_buf[i]);
- }
- printk ("\n");
-
- if (len <= 0)
- break;
- }
-
-out:
- return ret;
-}
-
-int
-danube_eeprom_open (struct inode *inode, struct file *filp)
-{
- filp->f_pos = 0;
- return 0;
-}
-
-int
-danube_eeprom_close (struct inode *inode, struct file *filp)
-{
- return 0;
-}
-
-int
-danube_eeprom_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data)
-{
- return 0;
-}
-
-ssize_t
-danube_eeprom_read (char *buf, size_t len, unsigned int addr)
-{
- int ret = 0;
- unsigned int data;
-
- printk("addr:=%d\n", addr);
- printk("len:=%d\n", len);
-
- if ((addr + len) > EEPROM_SIZE)
- {
- printk("invalid len\n");
- addr = 0;
- len = EEPROM_SIZE / 2;
- }
-
- if ((ret = ifx_ssc_open((struct inode *) 0, NULL)))
- {
- printk("danube_eeprom_open fails\n");
- goto out;
- }
-
- data = (unsigned int)IFX_SSC_MODE_RXTX;
-
- if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_RXTX_MODE_SET, (unsigned long) &data)))
- {
- printk("set RXTX mode fails\n");
- goto out;
- }
-
- if ((ret = eeprom_wrsr()))
- {
- printk("EEPROM reset fails\n");
- goto out;
- }
-
- if ((ret = eeprom_read(addr, buf, len)))
- {
- printk("eeprom read fails\n");
- goto out;
- }
-
-out:
- if (ifx_ssc_close((struct inode *) 0, NULL))
- printk("danube_eeprom_close fails\n");
-
- return len;
-}
-EXPORT_SYMBOL(danube_eeprom_read);
-
-static ssize_t
-danube_eeprom_fops_read (struct file *filp, char *ubuf, size_t len, loff_t * off)
-{
- int ret = 0;
- unsigned char ssc_rx_buf[EEPROM_SIZE];
- long flag;
-
- if (*off >= EEPROM_SIZE)
- return 0;
-
- if (*off + len > EEPROM_SIZE)
- len = EEPROM_SIZE - *off;
-
- if (len == 0)
- return 0;
-
- local_irq_save(flag);
-
- if ((ret = danube_eeprom_read(ssc_rx_buf, len, *off)) < 0)
- {
- printk("read fails, err=%x\n", ret);
- local_irq_restore(flag);
- return ret;
- }
-
- if (copy_to_user((void*)ubuf, ssc_rx_buf, ret) != 0)
- {
- local_irq_restore(flag);
- ret = -EFAULT;
- }
-
- local_irq_restore(flag);
- *off += len;
-
- return len;
-}
-
-ssize_t
-danube_eeprom_write (char *buf, size_t len, unsigned int addr)
-{
- int ret = 0;
- unsigned int data;
-
- if ((ret = ifx_ssc_open ((struct inode *) 0, NULL)))
- {
- printk ("danube_eeprom_open fails\n");
- goto out;
- }
-
- data = (unsigned int) IFX_SSC_MODE_RXTX;
-
- if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_RXTX_MODE_SET, (unsigned long) &data)))
- {
- printk ("set RXTX mode fails\n");
- goto out;
- }
-
- if ((ret = eeprom_wrsr ())) {
- printk ("EEPROM reset fails\n");
- goto out;
- }
-
- if ((ret = eeprom_write (addr, buf, len))) {
- printk ("eeprom write fails\n");
- goto out;
- }
-
-out:
- if (ifx_ssc_close ((struct inode *) 0, NULL))
- printk ("danube_eeprom_close fails\n");
-
- return ret;
-}
-EXPORT_SYMBOL(danube_eeprom_write);
-
-static ssize_t
-danube_eeprom_fops_write (struct file *filp, const char *ubuf, size_t len, loff_t * off)
-{
- int ret = 0;
- unsigned char ssc_tx_buf[EEPROM_SIZE];
-
- if (*off >= EEPROM_SIZE)
- return 0;
-
- if (len + *off > EEPROM_SIZE)
- len = EEPROM_SIZE - *off;
-
- if ((ret = copy_from_user (ssc_tx_buf, ubuf, len)))
- return EFAULT;
-
- ret = danube_eeprom_write (ssc_tx_buf, len, *off);
-
- if (ret > 0)
- *off = ret;
-
- return ret;
-}
-
-loff_t
-danube_eeprom_llseek (struct file * filp, loff_t off, int whence)
-{
- loff_t newpos;
- switch (whence) {
- case SEEK_SET:
- newpos = off;
- break;
-
- case SEEK_CUR:
- newpos = filp->f_pos + off;
- break;
-
- default:
- return -EINVAL;
- }
-
- if (newpos < 0)
- return -EINVAL;
-
- filp->f_pos = newpos;
-
- return newpos;
-}
-
-static struct file_operations danube_eeprom_fops = {
- owner:THIS_MODULE,
- llseek:danube_eeprom_llseek,
- read:danube_eeprom_fops_read,
- write:danube_eeprom_fops_write,
- ioctl:danube_eeprom_ioctl,
- open:danube_eeprom_open,
- release:danube_eeprom_close,
-};
-
-int __init
-danube_eeprom_init (void)
-{
- int ret = 0;
-
- danube_eeprom_maj = register_chrdev(0, "eeprom", &danube_eeprom_fops);
-
- if (danube_eeprom_maj < 0)
- {
- printk("failed to register eeprom device\n");
- ret = -EINVAL;
-
- goto out;
- }
-
- printk("danube_eeprom : /dev/eeprom mayor %d\n", danube_eeprom_maj);
-
-out:
- return ret;
-}
-
-void __exit
-danube_eeprom_cleanup_module (void)
-{
- /*if (unregister_chrdev (danube_eeprom_maj, "eeprom")) {
- printk ("Unable to unregister major %d for the EEPROM\n",
- maj);
- }*/
-}
-
-module_exit (danube_eeprom_cleanup_module);
-module_init (danube_eeprom_init);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("Peng Liu");
-MODULE_DESCRIPTION ("IFAP EEPROM driver");
-MODULE_SUPPORTED_DEVICE ("danube_eeprom");
-
-
diff --git a/target/linux/danube/files/drivers/char/danube_gpio.c b/target/linux/danube/files/drivers/char/danube_gpio.c
deleted file mode 100644
index dbdb71e8fb..0000000000
--- a/target/linux/danube/files/drivers/char/danube_gpio.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <linux/ioctl.h>
-#include <asm/semaphore.h>
-#include <asm/uaccess.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_ioctl.h>
-
-#define MAX_PORTS 2
-#define PINS_PER_PORT 16
-
-static unsigned int danube_gpio_major = 0;
-
-/* TODO do we need this ? */
-static struct semaphore port_sem;
-
-/* TODO do we really need this ? return in a define is forbidden by coding style */
-#define DANUBE_GPIO_SANITY {if (port > MAX_PORTS || pin > PINS_PER_PORT) return -EINVAL; }
-
-int
-danube_port_reserve_pin (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- printk("%s : call to obseleted function\n", __func__);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_reserve_pin);
-
-int
-danube_port_free_pin (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- printk("%s : call to obseleted function\n", __func__);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_free_pin);
-
-int
-danube_port_set_open_drain (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_OD + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_OD);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_open_drain);
-
-int
-danube_port_clear_open_drain (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_OD + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_OD);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_open_drain);
-
-int
-danube_port_set_pudsel (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_PUDSEL + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_PUDSEL);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_pudsel);
-
-int
-danube_port_clear_pudsel (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_PUDSEL + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_PUDSEL);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_pudsel);
-
-int
-danube_port_set_puden (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_PUDEN + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_PUDEN);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_puden);
-
-int
-danube_port_clear_puden (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_PUDEN + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_PUDEN);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_puden);
-
-int
-danube_port_set_stoff (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_STOFF + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_STOFF);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_stoff);
-
-int
-danube_port_clear_stoff (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_STOFF + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_STOFF);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_stoff);
-
-int
-danube_port_set_dir_out (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_DIR + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_DIR);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_dir_out);
-
-int
-danube_port_set_dir_in (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_DIR + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_DIR);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_dir_in);
-
-int
-danube_port_set_output (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_OUT + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_OUT);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_output);
-
-int
-danube_port_clear_output (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_OUT + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_OUT);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_output);
-
-int
-danube_port_get_input (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
-
- if (readl(DANUBE_GPIO_P0_IN + (port * 0x30)) & (1 << pin))
- return 0;
- else
- return 1;
-}
-EXPORT_SYMBOL(danube_port_get_input);
-
-int
-danube_port_set_altsel0 (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_ALTSEL0 + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_ALTSEL0);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_altsel0);
-
-int
-danube_port_clear_altsel0 (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_ALTSEL0 + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_ALTSEL0);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_altsel0);
-
-int
-danube_port_set_altsel1 (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_ALTSEL1 + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_ALTSEL1);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_set_altsel1);
-
-int
-danube_port_clear_altsel1 (unsigned int port, unsigned int pin)
-{
- DANUBE_GPIO_SANITY;
- writel(readl(DANUBE_GPIO_P0_ALTSEL1 + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_ALTSEL1);
-
- return 0;
-}
-EXPORT_SYMBOL(danube_port_clear_altsel1);
-
-long danube_port_read_procmem_helper(char* tag, u32* in_reg, char *buf)
-{
- u32 reg, bit = 0;
- unsigned int len, t;
-
- len = sprintf(buf, "\n%s: ", tag);
- reg = readl(in_reg);
- bit = 0x80000000;
- for (t = 0; t < 32; t++) {
- if ((reg & bit) > 0)
- len = len + sprintf(buf + len, "X");
- else
- len = len + sprintf(buf + len, " ");
- bit = bit >> 1;
- }
-
- return len;
-}
-
-int
-danube_port_read_procmem (char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
-{
- long len = sprintf (buf, "\nDanube Port Settings\n");
-
- len += sprintf (buf + len,
- " 3 2 1 0\n");
- len += sprintf (buf + len,
- " 10987654321098765432109876543210\n");
- len += sprintf (buf + len,
- "----------------------------------------\n");
-
- len += danube_port_read_procmem_helper("P0-OUT", DANUBE_GPIO_P0_OUT, &buf[len]);
- len += danube_port_read_procmem_helper("P1-OUT", DANUBE_GPIO_P1_OUT, &buf[len]);
- len += danube_port_read_procmem_helper("P0-IN ", DANUBE_GPIO_P0_IN, &buf[len]);
- len += danube_port_read_procmem_helper("P1-IN ", DANUBE_GPIO_P1_IN, &buf[len]);
- len += danube_port_read_procmem_helper("P0-DIR", DANUBE_GPIO_P0_DIR, &buf[len]);
- len += danube_port_read_procmem_helper("P1-DIR", DANUBE_GPIO_P1_DIR, &buf[len]);
- len += danube_port_read_procmem_helper("P0-STO ", DANUBE_GPIO_P0_STOFF, &buf[len]);
- len += danube_port_read_procmem_helper("P1-STO ", DANUBE_GPIO_P1_STOFF, &buf[len]);
- len += danube_port_read_procmem_helper("P0-PUDE", DANUBE_GPIO_P0_PUDEN, &buf[len]);
- len += danube_port_read_procmem_helper("P1-PUDE", DANUBE_GPIO_P1_PUDEN, &buf[len]);
- len += danube_port_read_procmem_helper("P0-OD ", DANUBE_GPIO_P0_OD, &buf[len]);
- len += danube_port_read_procmem_helper("P1-OD ", DANUBE_GPIO_P1_OD, &buf[len]);
- len += danube_port_read_procmem_helper("P0-PUDS", DANUBE_GPIO_P0_PUDSEL, &buf[len]);
- len += danube_port_read_procmem_helper("P1-PUDS", DANUBE_GPIO_P1_PUDSEL, &buf[len]);
- len += danube_port_read_procmem_helper("P0-ALT0", DANUBE_GPIO_P0_ALTSEL0, &buf[len]);
- len += danube_port_read_procmem_helper("P1-ALT0", DANUBE_GPIO_P1_ALTSEL0, &buf[len]);
- len += danube_port_read_procmem_helper("P0-ALT1", DANUBE_GPIO_P0_ALTSEL1, &buf[len]);
- len += danube_port_read_procmem_helper("P1-ALT1", DANUBE_GPIO_P1_ALTSEL1, &buf[len]);
- len = len + sprintf (buf + len, "\n\n");
-
- *eof = 1;
-
- return len;
-}
-
-static int
-danube_port_open (struct inode *inode, struct file *filep)
-{
- return 0;
-}
-
-static int
-danube_port_release (struct inode *inode, struct file *filelp)
-{
- return 0;
-}
-
-static int
-danube_port_ioctl (struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- int ret = 0;
- volatile struct danube_port_ioctl_parm parm;
-
- if (_IOC_TYPE (cmd) != DANUBE_PORT_IOC_MAGIC)
- return -EINVAL;
-
- if (_IOC_DIR (cmd) & _IOC_WRITE) {
- if (!access_ok
- (VERIFY_READ, arg,
- sizeof (struct danube_port_ioctl_parm)))
- return -EFAULT;
- ret = copy_from_user ((void *) &parm, (void *) arg,
- sizeof (struct danube_port_ioctl_parm));
- }
- if (_IOC_DIR (cmd) & _IOC_READ) {
- if (!access_ok
- (VERIFY_WRITE, arg,
- sizeof (struct danube_port_ioctl_parm)))
- return -EFAULT;
- }
-
- if (down_trylock (&port_sem) != 0)
- return -EBUSY;
-
- switch (cmd) {
- case DANUBE_PORT_IOCOD:
- if (parm.value == 0x00)
- danube_port_clear_open_drain(parm.port, parm.pin);
- else
- danube_port_set_open_drain(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCPUDSEL:
- if (parm.value == 0x00)
- danube_port_clear_pudsel(parm.port, parm.pin);
- else
- danube_port_set_pudsel(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCPUDEN:
- if (parm.value == 0x00)
- danube_port_clear_puden(parm.port, parm.pin);
- else
- danube_port_set_puden(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCSTOFF:
- if (parm.value == 0x00)
- danube_port_clear_stoff(parm.port, parm.pin);
- else
- danube_port_set_stoff(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCDIR:
- if (parm.value == 0x00)
- danube_port_set_dir_in(parm.port, parm.pin);
- else
- danube_port_set_dir_out(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCOUTPUT:
- if (parm.value == 0x00)
- danube_port_clear_output(parm.port, parm.pin);
- else
- danube_port_set_output(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCALTSEL0:
- if (parm.value == 0x00)
- danube_port_clear_altsel0(parm.port, parm.pin);
- else
- danube_port_set_altsel0(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCALTSEL1:
- if (parm.value == 0x00)
- danube_port_clear_altsel1(parm.port, parm.pin);
- else
- danube_port_set_altsel1(parm.port, parm.pin);
- break;
-
- case DANUBE_PORT_IOCINPUT:
- parm.value = danube_port_get_input(parm.port, parm.pin);
- copy_to_user((void*)arg, (void*)&parm,
- sizeof(struct danube_port_ioctl_parm));
- break;
-
- default:
- ret = -EINVAL;
- }
-
- up (&port_sem);
-
- return ret;
-}
-
-static struct file_operations port_fops = {
- .open = danube_port_open,
- .release = danube_port_release,
- .ioctl = danube_port_ioctl
-};
-
-int __init
-danube_gpio_init (void)
-{
- int retval = 0;
-
- sema_init (&port_sem, 1);
-
- danube_gpio_major = register_chrdev(0, "danube_gpio", &port_fops);
- if (!danube_gpio_major)
- {
- printk("danube-port: Error! Could not register port device. #%d\n", danube_gpio_major);
- retval = -EINVAL;
- goto out;
- }
-
- create_proc_read_entry("danube_gpio", 0, NULL,
- danube_port_read_procmem, NULL);
-
- printk("registered danube gpio driver\n");
-
-out:
- return retval;
-}
-
-void __exit
-danube_gpio_exit (void)
-{
- unregister_chrdev(danube_gpio_major, "danube_gpio");
- remove_proc_entry("danube_gpio", NULL);
-}
-
-module_init(danube_gpio_init);
-module_exit(danube_gpio_exit);
diff --git a/target/linux/danube/files/drivers/char/danube_led.c b/target/linux/danube/files/drivers/char/danube_led.c
deleted file mode 100644
index 86a92d5999..0000000000
--- a/target/linux/danube/files/drivers/char/danube_led.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2006 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-#include <linux/errno.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_gpio.h>
-#include <asm/danube/danube_pmu.h>
-
-#define DANUBE_LED_CLK_EDGE DANUBE_LED_FALLING
-//#define DANUBE_LED_CLK_EDGE DANUBE_LED_RISING
-
-#define DANUBE_LED_SPEED DANUBE_LED_8HZ
-
-#define DANUBE_LED_GPIO_PORT 0
-
-static int danube_led_major;
-
-void
-danube_led_set (unsigned int led)
-{
- led &= 0xffffff;
- writel(readl(DANUBE_LED_CPU0) | led, DANUBE_LED_CPU0);
-}
-EXPORT_SYMBOL(danube_led_set);
-
-void
-danube_led_clear (unsigned int led)
-{
- led = ~(led & 0xffffff);
- writel(readl(DANUBE_LED_CPU0) & led, DANUBE_LED_CPU0);
-}
-EXPORT_SYMBOL(danube_led_clear);
-
-void
-danube_led_blink_set (unsigned int led)
-{
- led &= 0xffffff;
- writel(readl(DANUBE_LED_CON0) | led, DANUBE_LED_CON0);
-}
-EXPORT_SYMBOL(danube_led_blink_set);
-
-void
-danube_led_blink_clear (unsigned int led)
-{
- led = ~(led & 0xffffff);
- writel(readl(DANUBE_LED_CON0) & led, DANUBE_LED_CON0);
-}
-EXPORT_SYMBOL(danube_led_blink_clear);
-
-void
-danube_led_setup_gpio (void)
-{
- int i = 0;
-
- /* we need to setup pins SH,D,ST (4,5,6) */
- for (i = 4; i < 7; i++)
- {
- danube_port_set_altsel0(DANUBE_LED_GPIO_PORT, i);
- danube_port_clear_altsel1(DANUBE_LED_GPIO_PORT, i);
- danube_port_set_dir_out(DANUBE_LED_GPIO_PORT, i);
- danube_port_set_open_drain(DANUBE_LED_GPIO_PORT, i);
- }
-}
-
-static int
-led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
-{
- int ret = -EINVAL;
-
- switch ( cmd )
- {
- }
-
- return ret;
-}
-
-static int
-led_open (struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static int
-led_release (struct inode *inode, struct file *file)
-{
- return 0;
-}
-
-static struct file_operations danube_led_fops = {
- .owner = THIS_MODULE,
- .ioctl = led_ioctl,
- .open = led_open,
- .release = led_release
-};
-
-
-/*
-Map for LED on reference board
- WLAN_READ LED11 OUT1 15
- WARNING LED12 OUT2 14
- FXS1_LINK LED13 OUT3 13
- FXS2_LINK LED14 OUT4 12
- FXO_ACT LED15 OUT5 11
- USB_LINK LED16 OUT6 10
- ADSL2_LINK LED19 OUT7 9
- BT_LINK LED17 OUT8 8
- SD_LINK LED20 OUT9 7
- ADSL2_TRAFFIC LED31 OUT16 0
-Map for hardware relay on reference board
- USB Power On OUT11 5
- RELAY OUT12 4
-*/
-
-
-int __init
-danube_led_init (void)
-{
- int ret = 0;
-
- danube_led_setup_gpio();
-
- writel(0, DANUBE_LED_AR);
- writel(0, DANUBE_LED_CPU0);
- writel(0, DANUBE_LED_CPU1);
- writel(LED_CON0_SWU, DANUBE_LED_CON0);
- writel(0, DANUBE_LED_CON1);
-
- /* setup the clock edge that the shift register is triggered on */
- writel(readl(DANUBE_LED_CON0) & ~DANUBE_LED_EDGE_MASK, DANUBE_LED_CON0);
- writel(readl(DANUBE_LED_CON0) | DANUBE_LED_CLK_EDGE, DANUBE_LED_CON0);
-
- /* per default leds 15-0 are set */
- writel(DANUBE_LED_GROUP1 | DANUBE_LED_GROUP0, DANUBE_LED_CON1);
-
- /* leds are update periodically by the FPID */
- writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_UPD_MASK, DANUBE_LED_CON1);
- writel(readl(DANUBE_LED_CON1) | DANUBE_LED_UPD_SRC_FPI, DANUBE_LED_CON1);
-
- /* set led update speed */
- writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_MASK, DANUBE_LED_CON1);
- writel(readl(DANUBE_LED_CON1) | DANUBE_LED_SPEED, DANUBE_LED_CON1);
-
- /* adsl 0 and 1 leds are updated by the arc */
- writel(readl(DANUBE_LED_CON0) | DANUBE_LED_ADSL_SRC, DANUBE_LED_CON0);
-
- /* per default, the leds are turned on */
- danube_pmu_enable(DANUBE_PMU_PWDCR_LED);
-
- danube_led_major = register_chrdev(0, "danube_led", &danube_led_fops);
-
- if (!danube_led_major)
- {
- printk("danube_led: Error! Could not register device. %d\n", danube_led_major);
- ret = -EINVAL;
-
- goto out;
- }
-
- printk(KERN_INFO "danube_led : device registered on major %d\n", danube_led_major);
-
-out:
- return ret;
-}
-
-void __exit
-danube_led_exit (void)
-{
- unregister_chrdev(danube_led_major, "danube_led");
-}
-
-module_init(danube_led_init);
-module_exit(danube_led_exit);
diff --git a/target/linux/danube/files/drivers/char/danube_ssc.c b/target/linux/danube/files/drivers/char/danube_ssc.c
deleted file mode 100644
index 1f90dac595..0000000000
--- a/target/linux/danube/files/drivers/char/danube_ssc.c
+++ /dev/null
@@ -1,1533 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2006 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-// ### TO DO: general issues:
-// - power management
-// - interrupt handling (direct/indirect)
-// - pin/mux-handling (just overall concept due to project dependency)
-// - multiple instances capability
-// - slave functionality
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/danube/ifx_ssc_defines.h>
-#include <asm/danube/ifx_ssc.h>
-
-#ifdef SSC_FRAME_INT_ENABLE
-#undef SSC_FRAME_INT_ENABLE
-#endif
-
-#define not_yet
-
-#define SPI_VINETIC
-
-
-
-/* allow the user to set the major device number */
-static int maj = 0;
-
-/*
- * This is the per-channel data structure containing pointers, flags
- * and variables for the port. This driver supports a maximum of PORT_CNT.
- * isp is allocated in ifx_ssc_init() based on the chip version.
- */
-static struct ifx_ssc_port *isp;
-
-/* prototypes for fops */
-static ssize_t ifx_ssc_read (struct file *, char *, size_t, loff_t *);
-static ssize_t ifx_ssc_write (struct file *, const char *, size_t, loff_t *);
-//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *);
-int ifx_ssc_ioctl (struct inode *, struct file *, unsigned int,
- unsigned long);
-int ifx_ssc_open (struct inode *, struct file *);
-int ifx_ssc_close (struct inode *, struct file *);
-
-/* other forward declarations */
-static unsigned int ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info);
-static void tx_int (struct ifx_ssc_port *);
-static int ifx_ssc1_read_proc (char *, char **, off_t, int, int *, void *);
-
-extern unsigned int danube_get_fpi_hz (void);
-extern void mask_and_ack_danube_irq (unsigned int irq_nr);
-
-static struct file_operations ifx_ssc_fops = {
- .owner = THIS_MODULE,
- .read = ifx_ssc_read,
- .write = ifx_ssc_write,
- .ioctl = ifx_ssc_ioctl,
- .open = ifx_ssc_open,
- .release = ifx_ssc_close,
-};
-
-static inline unsigned int
-ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info)
-{
- unsigned int rmc;
-
- rmc = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CLC) & IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET;
- if (rmc == 0)
- {
- printk ("ifx_ssc_get_kernel_clk rmc==0 \n");
- return 0;
- }
- return danube_get_fpi_hz () / rmc;
-}
-
-#ifndef not_yet
-#ifdef IFX_SSC_INT_USE_BH
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver
- * (also known as the "bottom half"). This can be called any
- * number of times for any channel without harm.
- */
-static inline void
-ifx_ssc_sched_event (struct ifx_ssc_port *info, int event)
-{
- info->event |= 1 << event; /* remember what kind of event and who */
- queue_task (&info->tqueue, &tq_cyclades); /* it belongs to */
- mark_bh (CYCLADES_BH); /* then trigger event */
-}
-
-static void
-do_softint (void *private_)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_;
-
- if (test_and_clear_bit (Cy_EVENT_HANGUP, &info->event))
- {
- wake_up_interruptible (&info->open_wait);
- info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE);
- }
-
- if (test_and_clear_bit (Cy_EVENT_OPEN_WAKEUP, &info->event))
- wake_up_interruptible (&info->open_wait);
-
- if (test_and_clear_bit (Cy_EVENT_DELTA_WAKEUP, &info->event))
- wake_up_interruptible (&info->delta_msr_wait);
-
- if (test_and_clear_bit (Cy_EVENT_WRITE_WAKEUP, &info->event))
- wake_up_interruptible (&tty->write_wait);
-#ifdef Z_WAKE
- if (test_and_clear_bit (Cy_EVENT_SHUTDOWN_WAKEUP, &info->event))
- wake_up_interruptible (&info->shutdown_wait);
-#endif
-}
-#endif
-#endif
-
-inline static void
-rx_int (struct ifx_ssc_port *info)
-{
- int fifo_fill_lev, bytes_in_buf, i;
- unsigned long tmp_val;
- unsigned long *tmp_ptr;
- unsigned int rx_valid_cnt;
- /* number of words waiting in the RX FIFO */
- fifo_fill_lev = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_FSTAT) & IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >> IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET;
- // Note: There are always 32 bits in a fifo-entry except for the last
- // word of a contigous transfer block and except for not in rx-only
- // mode and CON.ENBV set. But for this case it should be a convention
- // in software which helps:
- // In tx or rx/tx mode all transfers from the buffer to the FIFO are
- // 32-bit wide, except for the last three bytes, which could be a
- // combination of 16- and 8-bit access.
- // => The whole block is received as 32-bit words as a contigous stream,
- // even if there was a gap in tx which has the fifo run out of data!
- // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)!
-
- /* free space in the RX buffer */
- bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr;
- // transfer with 32 bits per entry
- while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) {
- tmp_ptr = (unsigned long *) info->rxbuf_ptr;
- *tmp_ptr = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RB);
- info->rxbuf_ptr += 4;
- info->stats.rxBytes += 4;
- fifo_fill_lev--;
- bytes_in_buf -= 4;
- }
-
- // now do the rest as mentioned in STATE.RXBV
- while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) {
- rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET;
- if (rx_valid_cnt == 0)
- break;
-
- if (rx_valid_cnt > bytes_in_buf)
- rx_valid_cnt = bytes_in_buf;
-
- tmp_val = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RB);
-
- for (i = 0; i < rx_valid_cnt; i++)
- {
- *info->rxbuf_ptr = (tmp_val >> (8 * (rx_valid_cnt - i - 1))) & 0xff;
- bytes_in_buf--;
- info->rxbuf_ptr++;
- }
- info->stats.rxBytes += rx_valid_cnt;
- }
-
- // check if transfer is complete
- if (info->rxbuf_ptr >= info->rxbuf_end)
- {
- disable_irq(info->rxirq);
- wake_up_interruptible (&info->rwait);
- } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) == 0))
- {
- if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE)
- WRITE_PERIPHERAL_REGISTER ((info->rxbuf_end - info->rxbuf_ptr) << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
- else
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
- }
-}
-
-inline static void
-tx_int (struct ifx_ssc_port *info)
-{
-
- int fifo_space, fill, i;
- fifo_space = ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_ID) & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
- - ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_FSTAT) & IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET);
-
- if (fifo_space == 0)
- return;
-
- fill = info->txbuf_end - info->txbuf_ptr;
-
- if (fill > fifo_space * 4)
- fill = fifo_space * 4;
-
- for (i = 0; i < fill / 4; i++)
- {
- // at first 32 bit access
- WRITE_PERIPHERAL_REGISTER (*(UINT32 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
- info->txbuf_ptr += 4;
- }
-
- fifo_space -= fill / 4;
- info->stats.txBytes += fill & ~0x3;
- fill &= 0x3;
- if ((fifo_space > 0) & (fill > 1))
- {
- // trailing 16 bit access
- WRITE_PERIPHERAL_REGISTER_16 (*(UINT16 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
- info->txbuf_ptr += 2;
- info->stats.txBytes += 2;
- fifo_space--;
- fill -= 2;
- }
-
- if ((fifo_space > 0) & (fill > 0))
- {
- // trailing 8 bit access
- WRITE_PERIPHERAL_REGISTER_8 (*(UINT8 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
- info->txbuf_ptr++;
- info->stats.txBytes++;
- }
-
- // check if transmission complete
- if (info->txbuf_ptr >= info->txbuf_end)
- {
- disable_irq(info->txirq);
- kfree (info->txbuf);
- info->txbuf = NULL;
- }
-
-}
-
-irqreturn_t
-ifx_ssc_rx_int (int irq, void *dev_id)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id;
- rx_int (info);
-
- return IRQ_HANDLED;
-}
-
-irqreturn_t
-ifx_ssc_tx_int (int irq, void *dev_id)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id;
- tx_int (info);
-
- return IRQ_HANDLED;
-}
-
-irqreturn_t
-ifx_ssc_err_int (int irq, void *dev_id)
-{
- struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id;
- unsigned int state;
- unsigned int write_back = 0;
- unsigned long flags;
-
- local_irq_save (flags);
- state = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE);
-
- if ((state & IFX_SSC_STATE_RX_UFL) != 0) {
- info->stats.rxUnErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR;
- }
-
- if ((state & IFX_SSC_STATE_RX_OFL) != 0) {
- info->stats.rxOvErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR;
- }
-
- if ((state & IFX_SSC_STATE_TX_OFL) != 0) {
- info->stats.txOvErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR;
- }
-
- if ((state & IFX_SSC_STATE_TX_UFL) != 0) {
- info->stats.txUnErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR;
- }
-
- if ((state & IFX_SSC_STATE_MODE_ERR) != 0) {
- info->stats.modeErr++;
- write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR;
- }
-
- if (write_back)
- WRITE_PERIPHERAL_REGISTER (write_back, info->mapbase + IFX_SSC_WHBSTATE);
-
- local_irq_restore (flags);
-
- return IRQ_HANDLED;
-}
-
-static void
-ifx_ssc_abort (struct ifx_ssc_port *info)
-{
- unsigned long flags;
- bool enabled;
-
- local_irq_save (flags);
-
- disable_irq(info->rxirq);
- disable_irq(info->txirq);
- disable_irq(info->errirq);
-
- local_irq_restore (flags);
-
- // disable SSC (also aborts a receive request!)
- // ### TO DO: Perhaps it's better to abort after the receiption of a
- // complete word. The disable cuts the transmission immediatly and
- // releases the chip selects. This could result in unpredictable
- // behavior of connected external devices!
- enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED) != 0;
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- // flush fifos
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_XFCON_FIFO_FLUSH, info->mapbase + IFX_SSC_TXFCON);
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_XFCON_FIFO_FLUSH, info->mapbase + IFX_SSC_RXFCON);
-
- // free txbuf
- if (info->txbuf != NULL)
- {
- kfree (info->txbuf);
- info->txbuf = NULL;
- }
-
- // wakeup read process
- if (info->rxbuf != NULL)
- wake_up_interruptible (&info->rwait);
-
- // clear pending int's
- mask_and_ack_danube_irq(info->rxirq);
- mask_and_ack_danube_irq(info->txirq);
- mask_and_ack_danube_irq(info->errirq);
-
- // clear error flags
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ALL_ERROR, info->mapbase + IFX_SSC_WHBSTATE);
-
- if (enabled)
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
-}
-
-/*
- * This routine is called whenever a port is opened. It enforces
- * exclusive opening of a port and enables interrupts, etc.
- */
-int
-ifx_ssc_open (struct inode *inode, struct file *filp)
-{
- struct ifx_ssc_port *info;
- int line;
- int from_kernel = 0;
-
- if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1)) {
- from_kernel = 1;
- line = (int) inode;
- } else {
- line = MINOR (filp->f_dentry->d_inode->i_rdev);
- filp->f_op = &ifx_ssc_fops;
- }
-
- /* don't open more minor devices than we can support */
- if (line < 0 || line >= PORT_CNT)
- return -ENXIO;
-
- info = &isp[line];
-
- /* exclusive open */
- if (info->port_is_open != 0)
- return -EBUSY;
- info->port_is_open++;
-
- disable_irq(info->rxirq);
- disable_irq(info->txirq);
- disable_irq(info->errirq);
-
- /* Flush and enable TX/RX FIFO */
- WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_FLUSH | IFX_SSC_XFCON_FIFO_ENABLE, info->mapbase + IFX_SSC_TXFCON);
- WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_FLUSH | IFX_SSC_XFCON_FIFO_ENABLE, info->mapbase + IFX_SSC_RXFCON);
-
- /* logically flush the software FIFOs */
- info->rxbuf_ptr = 0;
- info->txbuf_ptr = 0;
-
- /* clear all error bits */
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ALL_ERROR, info->mapbase + IFX_SSC_WHBSTATE);
-
- // clear pending interrupts
- mask_and_ack_danube_irq(info->rxirq);
- mask_and_ack_danube_irq(info->txirq);
- mask_and_ack_danube_irq(info->errirq);
-
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- return 0;
-}
-EXPORT_SYMBOL(ifx_ssc_open);
-
-int
-ifx_ssc_close (struct inode *inode, struct file *filp)
-{
- struct ifx_ssc_port *info;
- int idx;
-
- if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1))
- idx = (int) inode;
- else
- idx = MINOR (filp->f_dentry->d_inode->i_rdev);
-
- if (idx < 0 || idx >= PORT_CNT)
- return -ENXIO;
-
- info = &isp[idx];
- if (!info)
- return -ENXIO;
-
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- ifx_ssc_abort(info);
-
- info->port_is_open--;
-
- return 0;
-}
-EXPORT_SYMBOL(ifx_ssc_close);
-
-static ssize_t
-ifx_ssc_read_helper_poll (struct ifx_ssc_port *info, char *buf, size_t len, int from_kernel)
-{
- ssize_t ret_val;
- unsigned long flags;
-
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
- return -EFAULT;
- local_irq_save (flags);
- info->rxbuf_ptr = info->rxbuf;
- info->rxbuf_end = info->rxbuf + len;
- local_irq_restore (flags);
- /* Vinetic driver always works in IFX_SSC_MODE_RXTX */
- /* TXRX in poll mode */
- while (info->rxbuf_ptr < info->rxbuf_end)
- {
- if (info->txbuf_ptr < info->txbuf_end)
- tx_int (info);
-
- rx_int (info);
- };
-
- ret_val = info->rxbuf_ptr - info->rxbuf;
-
- return ret_val;
-}
-
-static ssize_t
-ifx_ssc_read_helper (struct ifx_ssc_port *info, char *buf, size_t len, int from_kernel)
-{
- ssize_t ret_val;
- unsigned long flags;
- DECLARE_WAITQUEUE (wait, current);
-
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
- return -EFAULT;
-
- local_irq_save (flags);
- info->rxbuf_ptr = info->rxbuf;
- info->rxbuf_end = info->rxbuf + len;
-
- if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX)
- {
- if ((info->txbuf == NULL) || (info->txbuf != info->txbuf_ptr) || (info->txbuf_end != len + info->txbuf))
- {
- local_irq_restore (flags);
- printk ("IFX SSC - %s: write must be called before calling " "read in combined RX/TX!\n", __func__);
- return -EFAULT;
- }
-
- local_irq_restore(flags);
- tx_int (info);
-
- if (info->txbuf_ptr < info->txbuf_end)
- enable_irq(info->txirq);
-
- enable_irq(info->rxirq);
- } else {
- local_irq_restore(flags);
- if (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK)
- return -EBUSY;
- enable_irq(info->rxirq);
- if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
- WRITE_PERIPHERAL_REGISTER (len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
- else
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
- }
-
- __add_wait_queue (&info->rwait, &wait);
- set_current_state (TASK_INTERRUPTIBLE);
-
- do {
- local_irq_save (flags);
- if (info->rxbuf_ptr >= info->rxbuf_end)
- break;
-
- local_irq_restore (flags);
-
- if (signal_pending (current))
- {
- ret_val = -ERESTARTSYS;
- goto out;
- }
- schedule();
- } while (1);
-
- ret_val = info->rxbuf_ptr - info->rxbuf;
- local_irq_restore (flags);
-
-out:
- current->state = TASK_RUNNING;
- __remove_wait_queue (&info->rwait, &wait);
-
- return (ret_val);
-}
-
-static ssize_t
-ifx_ssc_write_helper (struct ifx_ssc_port *info, const char *buf,
- size_t len, int from_kernel)
-{
- if (info->opts.modeRxTx == IFX_SSC_MODE_RX)
- return -EFAULT;
-
- info->txbuf_ptr = info->txbuf;
- info->txbuf_end = len + info->txbuf;
- if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
- {
- tx_int (info);
- if (info->txbuf_ptr < info->txbuf_end)
- {
- enable_irq(info->txirq);
- }
- }
-
- return len;
-}
-
-ssize_t
-ifx_ssc_kread (int port, char *kbuf, size_t len)
-{
- struct ifx_ssc_port *info;
- ssize_t ret_val;
-
- if (port < 0 || port >= PORT_CNT)
- return -ENXIO;
-
- if (len == 0)
- return 0;
-
- info = &isp[port];
-
- if (info->rxbuf != NULL)
- {
- printk ("SSC device busy\n");
- return -EBUSY;
- }
-
- info->rxbuf = kbuf;
- if (info->rxbuf == NULL)
- {
- printk ("SSC device error\n");
- return -EINVAL;
- }
-
- ret_val = ifx_ssc_read_helper_poll (info, kbuf, len, 1);
- info->rxbuf = NULL;
-
- disable_irq(info->rxirq);
-
- return ret_val;
-}
-EXPORT_SYMBOL(ifx_ssc_kread);
-
-ssize_t
-ifx_ssc_kwrite (int port, const char *kbuf, size_t len)
-{
- struct ifx_ssc_port *info;
- ssize_t ret_val;
-
- if (port < 0 || port >= PORT_CNT)
- return -ENXIO;
-
- if (len == 0)
- return 0;
-
- info = &isp[port];
-
- // check if transmission in progress
- if (info->txbuf != NULL)
- return -EBUSY;
-
- info->txbuf = (char *) kbuf;
-
- ret_val = ifx_ssc_write_helper (info, info->txbuf, len, 1);
-
- if (ret_val < 0)
- info->txbuf = NULL;
-
- return ret_val;
-}
-EXPORT_SYMBOL(ifx_ssc_kwrite);
-
-static ssize_t
-ifx_ssc_read (struct file *filp, char *ubuf, size_t len, loff_t * off)
-{
- ssize_t ret_val;
- int idx;
- struct ifx_ssc_port *info;
-
- idx = MINOR (filp->f_dentry->d_inode->i_rdev);
- info = &isp[idx];
-
- if (info->rxbuf != NULL)
- return -EBUSY;
-
- info->rxbuf = kmalloc (len + 3, GFP_KERNEL);
- if (info->rxbuf == NULL)
- return -ENOMEM;
-
- ret_val = ifx_ssc_read_helper (info, info->rxbuf, len, 0);
- if (copy_to_user ((void *) ubuf, info->rxbuf, ret_val) != 0)
- ret_val = -EFAULT;
-
- disable_irq(info->rxirq);
-
- kfree (info->rxbuf);
- info->rxbuf = NULL;
-
- return (ret_val);
-}
-
-static ssize_t
-ifx_ssc_write (struct file *filp, const char *ubuf, size_t len, loff_t * off)
-{
- int idx;
- struct ifx_ssc_port *info;
- int ret_val;
-
- if (len == 0)
- return (0);
-
- idx = MINOR (filp->f_dentry->d_inode->i_rdev);
- info = &isp[idx];
-
- if (info->txbuf != NULL)
- return -EBUSY;
-
- info->txbuf = kmalloc (len + 3, GFP_KERNEL);
- if (info->txbuf == NULL)
- return -ENOMEM;
-
- ret_val = copy_from_user (info->txbuf, ubuf, len);
- if (ret_val == 0)
- ret_val = ifx_ssc_write_helper (info, info->txbuf, len, 0);
- else
- ret_val = -EFAULT;
-
- if (ret_val < 0)
- {
- kfree (info->txbuf);
- info->txbuf = NULL;
- }
-
- return (ret_val);
-}
-
-static struct ifx_ssc_frm_status *
-ifx_ssc_frm_status_get (struct ifx_ssc_port *info)
-{
- unsigned long tmp;
-
- tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFSTAT);
- info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0;
- info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0;
- info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET;
- info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET;
- tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON);
- info->frm_status.EnIntAfterData = (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0;
- info->frm_status.EnIntAfterPause = (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0;
-
- return &info->frm_status;
-}
-
-
-static struct ifx_ssc_frm_opts *
-ifx_ssc_frm_control_get (struct ifx_ssc_port *info)
-{
- unsigned long tmp;
-
- tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON);
- info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0;
- info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
- info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
- info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
- info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
- info->frm_opts.StopAfterPause = (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0;
-
- return &info->frm_opts;
-}
-
-static int
-ifx_ssc_frm_control_set (struct ifx_ssc_port *info)
-{
- unsigned long tmp;
-
- // check parameters
- if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX)
- || (info->frm_opts.DataLength < 1)
- || (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX)
- || (info->frm_opts.PauseLength < 1)
- || (info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET))
- || (info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)))
- return -EINVAL;
-
- // read interrupt bits (they're not changed here)
- tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON) &
- (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
-
- // set all values with respect to it's bit position (for data and pause
- // length set N-1)
- tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
- tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
- tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
- tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
- tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE;
- tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE;
-
- WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON);
-
- return 0;
-}
-
-static int
-ifx_ssc_rxtx_mode_set (struct ifx_ssc_port *info, unsigned int val)
-{
- unsigned long tmp;
-
- if (!(info) || (val & ~(IFX_SSC_MODE_MASK)))
- return -EINVAL;
-
- if ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY)
- || (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK))
- return -EBUSY;
-
- tmp = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) & ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
- WRITE_PERIPHERAL_REGISTER (tmp, info->mapbase + IFX_SSC_CON);
- info->opts.modeRxTx = val;
-
- return 0;
-}
-
-static int
-ifx_ssc_sethwopts (struct ifx_ssc_port *info)
-{
- unsigned long flags, bits;
- struct ifx_ssc_hwopts *opts = &info->opts;
-
- if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH)
- || (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH))
- return -EINVAL;
-
- bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET;
- bits |= IFX_SSC_CON_ENABLE_BYTE_VALID;
-
- if (opts->rxOvErrDetect)
- bits |= IFX_SSC_CON_RX_OFL_CHECK;
- if (opts->rxUndErrDetect)
- bits |= IFX_SSC_CON_RX_UFL_CHECK;
- if (opts->txOvErrDetect)
- bits |= IFX_SSC_CON_TX_OFL_CHECK;
- if (opts->txUndErrDetect)
- bits |= IFX_SSC_CON_TX_UFL_CHECK;
- if (opts->loopBack)
- bits |= IFX_SSC_CON_LOOPBACK_MODE;
- if (opts->echoMode)
- bits |= IFX_SSC_CON_ECHO_MODE_ON;
- if (opts->headingControl)
- bits |= IFX_SSC_CON_MSB_FIRST;
- if (opts->clockPhase)
- bits |= IFX_SSC_CON_LATCH_THEN_SHIFT;
- if (opts->clockPolarity)
- bits |= IFX_SSC_CON_CLOCK_FALL;
-
- switch (opts->modeRxTx)
- {
- case IFX_SSC_MODE_TX:
- bits |= IFX_SSC_CON_RX_OFF;
- break;
- case IFX_SSC_MODE_RX:
- bits |= IFX_SSC_CON_TX_OFF;
- break;
- }
-
- local_irq_save (flags);
-
- WRITE_PERIPHERAL_REGISTER (bits, info->mapbase + IFX_SSC_CON);
- WRITE_PERIPHERAL_REGISTER ((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) |
- (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), info->mapbase + IFX_SSC_GPOCON);
-
- WRITE_PERIPHERAL_REGISTER (info->opts.gpoCs << IFX_SSC_WHBGPOSTAT_SETOUT0_POS, info->mapbase + IFX_SSC_WHBGPOSTAT);
-
- //master mode
- if (opts->masterSelect)
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE);
- else
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE);
-
- // init serial framing
- WRITE_PERIPHERAL_REGISTER (0, info->mapbase + IFX_SSC_SFCON);
- /* set up the port pins */
- //check for general requirements to switch (external) pad/pin characteristics
- /* TODO: P0.9 SPI_CS4, P0.10 SPI_CS5, P 0.11 SPI_CS6, because of ASC0 */
- /* p0.15 SPI_CS1(EEPROM), P0.13 SPI_CS3, */
- /* Set p0.15 to alternative 01, others to 00 (In/OUT) */
- *(DANUBE_GPIO_P0_DIR) = (*DANUBE_GPIO_P0_DIR) | (0xA000);
- *(DANUBE_GPIO_P0_ALTSEL0) = (((*DANUBE_GPIO_P0_ALTSEL0) | (0x8000)) & (~(0x2000)));
- *(DANUBE_GPIO_P0_ALTSEL1) = (((*DANUBE_GPIO_P0_ALTSEL1) & (~0x8000)) & (~(0x2000)));
- *(DANUBE_GPIO_P0_OD) = (*DANUBE_GPIO_P0_OD) | 0xA000;
-
- /* p1.6 SPI_CS2(SFLASH), p1.0 SPI_DIN, p1.1 SPI_DOUT, p1.2 SPI_CLK */
- *(DANUBE_GPIO_P1_DIR) = ((*DANUBE_GPIO_P1_DIR) | (0x46)) & (~1);
- *(DANUBE_GPIO_P1_ALTSEL0) = ((*DANUBE_GPIO_P1_ALTSEL0) | (0x47));
- *(DANUBE_GPIO_P1_ALTSEL1) = (*DANUBE_GPIO_P1_ALTSEL1) & (~0x47);
- *(DANUBE_GPIO_P1_OD) = (*DANUBE_GPIO_P1_OD) | 0x0046;
-
- /*CS3 */
- /*TODO: CS4 CS5 CS6 */
- *DANUBE_GPIO_P0_OUT = ((*DANUBE_GPIO_P0_OUT) | 0x2000);
-
- local_irq_restore (flags);
-
- return 0;
-}
-
-static int
-ifx_ssc_set_baud (struct ifx_ssc_port *info, unsigned int baud)
-{
- unsigned int ifx_ssc_clock;
- unsigned int br;
- unsigned long flags;
- bool enabled;
- int retval = 0;
-
- ifx_ssc_clock = ifx_ssc_get_kernel_clk(info);
- if (ifx_ssc_clock == 0)
- {
- retval = -EINVAL;
- goto out;
- }
-
- local_irq_save (flags);
-
- enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED);
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- br = (((ifx_ssc_clock >> 1) + baud / 2) / baud) - 1;
- wmb();
-
- if (br > 0xffff || ((br == 0) &&
- ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_MASTER) == 0))) {
- local_irq_restore (flags);
- printk ("%s: invalid baudrate %u\n", __func__, baud);
- return -EINVAL;
- }
-
- WRITE_PERIPHERAL_REGISTER (br, info->mapbase + IFX_SSC_BR);
-
- if (enabled)
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- local_irq_restore(flags);
-
-out:
- return retval;
-}
-
-static int
-ifx_ssc_hwinit (struct ifx_ssc_port *info)
-{
- unsigned long flags;
- bool enabled;
-
- enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED);
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- if (ifx_ssc_sethwopts (info) < 0)
- {
- printk ("%s: setting the hardware options failed\n", __func__);
- return -EINVAL;
- }
-
- if (ifx_ssc_set_baud (info, info->baud) < 0)
- {
- printk ("%s: setting the baud rate failed\n", __func__);
- return -EINVAL;
- }
-
- local_irq_save (flags);
-
- /* TX FIFO */
- WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE,
- info->mapbase + IFX_SSC_TXFCON);
- /* RX FIFO */
- WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE,
- info->mapbase + IFX_SSC_RXFCON);
-
- local_irq_restore (flags);
-
- if (enabled)
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
-
- return 0;
-}
-
-int
-ifx_ssc_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data)
-{
- struct ifx_ssc_port *info;
- int line, ret_val = 0;
- unsigned long flags;
- unsigned long tmp;
- int from_kernel = 0;
-
- if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1))
- {
- from_kernel = 1;
- line = (int) inode;
- } else {
- line = MINOR (filp->f_dentry->d_inode->i_rdev);
- }
-
- if (line < 0 || line >= PORT_CNT)
- return -ENXIO;
-
- info = &isp[line];
-
- switch (cmd)
- {
- case IFX_SSC_STATS_READ:
- /* data must be a pointer to a struct ifx_ssc_statistics */
- if (from_kernel)
- memcpy ((void *) data, (void *) &info->stats,
- sizeof (struct ifx_ssc_statistics));
- else if (copy_to_user ((void *) data,
- (void *) &info->stats,
- sizeof (struct ifx_ssc_statistics)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_STATS_RESET:
- /* just resets the statistics counters */
- memset ((void *) &info->stats, 0,
- sizeof (struct ifx_ssc_statistics));
- break;
- case IFX_SSC_BAUD_SET:
- /* if the buffers are not empty then the port is */
- /* busy and we shouldn't change things on-the-fly! */
- if (!info->txbuf || !info->rxbuf ||
- (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_BUSY)) {
- ret_val = -EBUSY;
- break;
- }
- /* misuse flags */
- if (from_kernel)
- flags = *((unsigned long *) data);
- else if (copy_from_user ((void *) &flags,
- (void *) data, sizeof (flags))) {
- ret_val = -EFAULT;
- break;
- }
- if (flags == 0) {
- ret_val = -EINVAL;
- break;
- }
- if (ifx_ssc_set_baud (info, flags) < 0) {
- ret_val = -EINVAL;
- break;
- }
- info->baud = flags;
- break;
- case IFX_SSC_BAUD_GET:
- if (from_kernel)
- *((unsigned int *) data) = info->baud;
- else if (copy_to_user ((void *) data,
- (void *) &info->baud,
- sizeof (unsigned long)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_RXTX_MODE_SET:
- if (from_kernel)
- tmp = *((unsigned long *) data);
- else if (copy_from_user ((void *) &tmp,
- (void *) data, sizeof (tmp))) {
- ret_val = -EFAULT;
- break;
- }
- ret_val = ifx_ssc_rxtx_mode_set (info, tmp);
- break;
- case IFX_SSC_RXTX_MODE_GET:
- tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) &
- (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF));
- if (from_kernel)
- *((unsigned int *) data) = tmp;
- else if (copy_to_user ((void *) data,
- (void *) &tmp, sizeof (tmp)))
- ret_val = -EFAULT;
- break;
-
- case IFX_SSC_ABORT:
- ifx_ssc_abort (info);
- break;
-
- case IFX_SSC_GPO_OUT_SET:
- if (from_kernel)
- tmp = *((unsigned long *) data);
- else if (copy_from_user ((void *) &tmp,
- (void *) data, sizeof (tmp))) {
- ret_val = -EFAULT;
- break;
- }
- if (tmp > IFX_SSC_MAX_GPO_OUT)
- ret_val = -EINVAL;
- else
- WRITE_PERIPHERAL_REGISTER
- (1 << (tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS),
- info->mapbase + IFX_SSC_WHBGPOSTAT);
- break;
- case IFX_SSC_GPO_OUT_CLR:
- if (from_kernel)
- tmp = *((unsigned long *) data);
- else if (copy_from_user ((void *) &tmp,
- (void *) data, sizeof (tmp))) {
- ret_val = -EFAULT;
- break;
- }
- if (tmp > IFX_SSC_MAX_GPO_OUT)
- ret_val = -EINVAL;
- else {
- WRITE_PERIPHERAL_REGISTER
- (1 << (tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS),
- info->mapbase + IFX_SSC_WHBGPOSTAT);
- }
- break;
- case IFX_SSC_GPO_OUT_GET:
- tmp = READ_PERIPHERAL_REGISTER
- (info->mapbase + IFX_SSC_GPOSTAT);
- if (from_kernel)
- *((unsigned int *) data) = tmp;
- else if (copy_to_user ((void *) data,
- (void *) &tmp, sizeof (tmp)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_FRM_STATUS_GET:
- ifx_ssc_frm_status_get (info);
- if (from_kernel)
- memcpy ((void *) data, (void *) &info->frm_status,
- sizeof (struct ifx_ssc_frm_status));
- else if (copy_to_user ((void *) data,
- (void *) &info->frm_status,
- sizeof (struct ifx_ssc_frm_status)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_FRM_CONTROL_GET:
- ifx_ssc_frm_control_get (info);
- if (from_kernel)
- memcpy ((void *) data, (void *) &info->frm_opts,
- sizeof (struct ifx_ssc_frm_opts));
- else if (copy_to_user ((void *) data,
- (void *) &info->frm_opts,
- sizeof (struct ifx_ssc_frm_opts)))
- ret_val = -EFAULT;
- break;
- case IFX_SSC_FRM_CONTROL_SET:
- if (from_kernel)
- memcpy ((void *) &info->frm_opts, (void *) data,
- sizeof (struct ifx_ssc_frm_opts));
- else if (copy_to_user ((void *) &info->frm_opts,
- (void *) data,
- sizeof (struct ifx_ssc_frm_opts))) {
- ret_val = -EFAULT;
- break;
- }
- ret_val = ifx_ssc_frm_control_set (info);
- break;
- case IFX_SSC_HWOPTS_SET:
- /* data must be a pointer to a struct ifx_ssc_hwopts */
- /* if the buffers are not empty then the port is */
- /* busy and we shouldn't change things on-the-fly! */
- if (!info->txbuf || !info->rxbuf ||
- (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE)
- & IFX_SSC_STATE_BUSY)) {
- ret_val = -EBUSY;
- break;
- }
- if (from_kernel)
- memcpy ((void *) &info->opts, (void *) data,
- sizeof (struct ifx_ssc_hwopts));
- else if (copy_from_user ((void *) &info->opts,
- (void *) data,
- sizeof (struct ifx_ssc_hwopts))) {
- ret_val = -EFAULT;
- break;
- }
- if (ifx_ssc_hwinit (info) < 0) {
- ret_val = -EIO;
- }
- break;
- case IFX_SSC_HWOPTS_GET:
- /* data must be a pointer to a struct ifx_ssc_hwopts */
- if (from_kernel)
- memcpy ((void *) data, (void *) &info->opts,
- sizeof (struct ifx_ssc_hwopts));
- else if (copy_to_user ((void *) data,
- (void *) &info->opts,
- sizeof (struct ifx_ssc_hwopts)))
- ret_val = -EFAULT;
- break;
- default:
- ret_val = -ENOIOCTLCMD;
- }
-
- return ret_val;
-}
-EXPORT_SYMBOL(ifx_ssc_ioctl);
-
-static int
-ifx_ssc1_read_proc (char *page, char **start, off_t offset, int count, int *eof, void *data)
-{
- int off = 0;
- unsigned long flags;
-
- local_save_flags(flags);
- local_irq_disable();
-
- off += sprintf (page + off, "Statistics for Infineon Synchronous Serial Controller SSC1\n");
- off += sprintf (page + off, "RX overflow errors %d\n", isp[0].stats.rxOvErr);
- off += sprintf (page + off, "RX underflow errors %d\n", isp[0].stats.rxUnErr);
- off += sprintf (page + off, "TX overflow errors %d\n", isp[0].stats.txOvErr);
- off += sprintf (page + off, "TX underflow errors %d\n", isp[0].stats.txUnErr);
- off += sprintf (page + off, "Abort errors %d\n", isp[0].stats.abortErr);
- off += sprintf (page + off, "Mode errors %d\n", isp[0].stats.modeErr);
- off += sprintf (page + off, "RX Bytes %d\n", isp[0].stats.rxBytes);
- off += sprintf (page + off, "TX Bytes %d\n", isp[0].stats.txBytes);
-
- local_irq_restore(flags);
- *eof = 1;
-
- return off;
-}
-
-int __init
-ifx_ssc_init (void)
-{
- struct ifx_ssc_port *info;
- int i, nbytes;
- unsigned long flags;
- int ret_val;
-
- ret_val = -ENOMEM;
- nbytes = PORT_CNT * sizeof(struct ifx_ssc_port);
- isp = (struct ifx_ssc_port*)kmalloc(nbytes, GFP_KERNEL);
-
- if (isp == NULL)
- {
- printk("%s: no memory for isp\n", __func__);
- return (ret_val);
- }
- memset(isp, 0, nbytes);
-
- ret_val = -ENXIO;
- if ((i = register_chrdev (maj, "ssc", &ifx_ssc_fops)) < 0)
- {
- printk ("Unable to register major %d for the Infineon SSC\n", maj);
- if (maj == 0)
- {
- goto errout;
- } else {
- maj = 0;
- if ((i = register_chrdev (maj, "ssc", &ifx_ssc_fops)) < 0)
- {
- printk ("Unable to register major %d for the Infineon SSC\n", maj);
- goto errout;
- }
- }
- }
-
- if (maj == 0)
- maj = i;
-
- /* set default values in ifx_ssc_port */
- for (i = 0; i < PORT_CNT; i++) {
- info = &isp[i];
- info->port_nr = i;
- /* default values for the HwOpts */
- info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT;
- info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT;
- info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT;
- info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT;
- info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT;
- info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK;
- info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE;
- info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA;
- info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY;
- info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE;
- info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL;
- info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH;
- info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX;
- info->opts.gpoCs = IFX_SSC_DEF_GPO_CS;
- info->opts.gpoInv = IFX_SSC_DEF_GPO_INV;
- info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE;
- info->baud = IFX_SSC_DEF_BAUDRATE;
- info->rxbuf = NULL;
- info->txbuf = NULL;
- /* values specific to SSC1 */
- if (i == 0) {
- info->mapbase = DANUBE_SSC1_BASE_ADDR;
- info->txirq = DANUBE_SSC_TIR;
- info->rxirq = DANUBE_SSC_RIR;
- info->errirq = DANUBE_SSC_EIR;
- }
-
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC);
-
- init_waitqueue_head (&info->rwait);
-
- local_irq_save (flags);
-
- // init serial framing register
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON);
-
- ret_val = request_irq(info->txirq, ifx_ssc_tx_int, SA_INTERRUPT, "ifx_ssc_tx", info);
- if (ret_val)
- {
- printk("%s: unable to get irq %d\n", __func__, info->txirq);
- local_irq_restore(flags);
- goto errout;
- }
-
- ret_val = request_irq(info->rxirq, ifx_ssc_rx_int, SA_INTERRUPT, "ifx_ssc_rx", info);
- if (ret_val)
- {
- printk ("%s: unable to get irq %d\n", __func__, info->rxirq);
- local_irq_restore (flags);
- goto irqerr;
- }
-
- ret_val = request_irq(info->errirq, ifx_ssc_err_int, SA_INTERRUPT,"ifx_ssc_err", info);
- if (ret_val)
- {
- printk ("%s: unable to get irq %d\n", __func__, info->errirq);
- local_irq_restore (flags);
- goto irqerr;
- }
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN);
-
- enable_irq(info->txirq);
- enable_irq(info->rxirq);
- enable_irq(info->errirq);
-
- local_irq_restore (flags);
- }
-
- for (i = 0; i < PORT_CNT; i++) {
- info = &isp[i];
- if (ifx_ssc_hwinit (info) < 0)
- {
- printk ("%s: hardware init failed for port %d\n", __func__, i);
- goto irqerr;
- }
- }
-
- create_proc_read_entry ("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL);
-
- return 0;
-
-irqerr:
- free_irq(isp[0].txirq, &isp[0]);
- free_irq(isp[0].rxirq, &isp[0]);
- free_irq(isp[0].errirq, &isp[0]);
-errout:
- kfree (isp);
- return (ret_val);
-}
-
-void
-ifx_ssc_cleanup_module (void)
-{
- int i;
-
- for (i = 0; i < PORT_CNT; i++) {
- WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, isp[i].mapbase + IFX_SSC_WHBSTATE);
- free_irq(isp[i].txirq, &isp[i]);
- free_irq(isp[i].rxirq, &isp[i]);
- free_irq(isp[i].errirq, &isp[i]);
- }
- kfree (isp);
- remove_proc_entry ("driver/ssc1", NULL);
-}
-
-module_init(ifx_ssc_init);
-module_exit(ifx_ssc_cleanup_module);
-
-
-inline int
-ifx_ssc_cs_low (u32 pin)
-{
- int ret = 0;
- if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_CLR, (unsigned long) &pin)))
- printk ("clear CS %d fails\n", pin);
- wmb ();
-
- return ret;
-}
-EXPORT_SYMBOL(ifx_ssc_cs_low);
-
-inline int
-ifx_ssc_cs_high (u32 pin)
-{
- int ret = 0;
- if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_SET, (unsigned long) &pin)))
- printk ("set CS %d fails\n", pin);
- wmb ();
-
- return ret;
-}
-EXPORT_SYMBOL(ifx_ssc_cs_high);
-
-static int
-ssc_session (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len)
-{
- int ret = 0;
-
- char *ssc_tx_buf = NULL;
- char *ssc_rx_buf = NULL;
- int eff_size = 0;
- u8 mode = 0;
-
- if (tx_buf == NULL && tx_len == 0 && rx_buf == NULL && rx_len == 0) {
- printk ("invalid parameters\n");
- ret = -EINVAL;
- goto ssc_session_exit;
- }
- else if (tx_buf == NULL || tx_len == 0) {
- if (rx_buf != NULL && rx_len != 0) {
- mode = IFX_SSC_MODE_RX;
- }
- else {
- printk ("invalid parameters\n");
- ret = -EINVAL;
- goto ssc_session_exit;
- }
- }
- else if (rx_buf == NULL || rx_len == 0) {
- if (tx_buf != NULL && tx_len != 0) {
- mode = IFX_SSC_MODE_TX;
- }
- else {
- printk ("invalid parameters\n");
- ret = -EINVAL;
- goto ssc_session_exit;
- }
- }
- else {
- mode = IFX_SSC_MODE_RXTX;
- }
-
- if (mode == IFX_SSC_MODE_RXTX) {
- eff_size = tx_len + rx_len;
- }
- else if (mode == IFX_SSC_MODE_RX) {
- eff_size = rx_len;
- }
- else {
- eff_size = tx_len;
- }
-
- //4 bytes alignment, required by driver
- /* change by TaiCheng */
- //if (in_irq()){
- if (1) {
- ssc_tx_buf =
- (char *) kmalloc (sizeof (char) *
- ((eff_size + 3) & (~3)),
- GFP_ATOMIC);
- ssc_rx_buf =
- (char *) kmalloc (sizeof (char) *
- ((eff_size + 3) & (~3)),
- GFP_ATOMIC);
- }
- else {
- ssc_tx_buf =
- (char *) kmalloc (sizeof (char) *
- ((eff_size + 3) & (~3)),
- GFP_KERNEL);
- ssc_rx_buf =
- (char *) kmalloc (sizeof (char) *
- ((eff_size + 3) & (~3)),
- GFP_KERNEL);
- }
- if (ssc_tx_buf == NULL || ssc_rx_buf == NULL) {
- printk ("no memory for size of %d\n", eff_size);
- ret = -ENOMEM;
- goto ssc_session_exit;
- }
- memset ((void *) ssc_tx_buf, 0, eff_size);
- memset ((void *) ssc_rx_buf, 0, eff_size);
-
- if (tx_len > 0) {
- memcpy (ssc_tx_buf, tx_buf, tx_len);
- }
-
- ret = ifx_ssc_kwrite (0, ssc_tx_buf, eff_size);
-
- if (ret > 0) {
- ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite
- }
-
- if (ret != eff_size) {
- printk ("ifx_ssc_write return %d\n", ret);
- goto ssc_session_exit;
- }
- ret = ifx_ssc_kread (0, ssc_rx_buf, eff_size);
- if (ret != eff_size) {
- printk ("ifx_ssc_read return %d\n", ret);
- goto ssc_session_exit;
- }
-
- memcpy (rx_buf, ssc_rx_buf + tx_len, rx_len);
-
- if (mode == IFX_SSC_MODE_TX) {
- ret = tx_len;
- }
- else {
- ret = rx_len;
- }
- ssc_session_exit:
-
- if (ssc_tx_buf != NULL)
- kfree (ssc_tx_buf);
- if (ssc_rx_buf != NULL)
- kfree (ssc_rx_buf);
-
- if (ret < 0) {
- printk ("ssc session fails\n");
- }
- return ret;
-}
-
-int
-ifx_ssc_txrx (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len)
-{
- return ssc_session(tx_buf, tx_len, rx_buf, rx_len);
-}
-EXPORT_SYMBOL(ifx_ssc_txrx);
-
-int
-ifx_ssc_tx (char *tx_buf, u32 tx_len)
-{
- return ssc_session(tx_buf, tx_len, NULL, 0);
-}
-EXPORT_SYMBOL(ifx_ssc_tx);
-
-int
-ifx_ssc_rx (char *rx_buf, u32 rx_len)
-{
- return ssc_session(NULL, 0, rx_buf, rx_len);
-}
-EXPORT_SYMBOL(ifx_ssc_rx);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION("danube ssc driver");
-
diff --git a/target/linux/danube/files/drivers/char/watchdog/danube_wdt.c b/target/linux/danube/files/drivers/char/watchdog/danube_wdt.c
deleted file mode 100644
index be2b339381..0000000000
--- a/target/linux/danube/files/drivers/char/watchdog/danube_wdt.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2006 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <asm/uaccess.h>
-#include <linux/errno.h>
-#include <linux/proc_fs.h>
-#include <linux/ioctl.h>
-#include <linux/module.h>
-#include <asm-mips/danube/danube_wdt.h>
-#include <asm-mips/danube/danube.h>
-
-
-// TODO remove magic numbers and weirdo macros
-
-extern unsigned int danube_get_fpi_hz (void);
-
-static int danube_wdt_inuse = 0;
-static int danube_wdt_major = 0;
-
-int
-danube_wdt_enable (unsigned int timeout)
-{
- unsigned int wdt_cr = 0;
- unsigned int wdt_reload = 0;
- unsigned int wdt_clkdiv, wdt_pwl, ffpi;
- int retval = 0;
-
- /* clock divider & prewarning limit */
- wdt_clkdiv = 1 << (7 * DANUBE_BIU_WDT_CR_CLKDIV_GET(readl(DANUBE_BIU_WDT_CR)));
- wdt_pwl = 0x8000 >> DANUBE_BIU_WDT_CR_PWL_GET(readl(DANUBE_BIU_WDT_CR));
-
- //TODO
- printk("WARNING FUNCTION CALL MISSING!!!");
- //ffpi = cgu_get_io_region_clock();
- printk("cpu clock = %d\n", ffpi);
-
- /* caculate reload value */
- wdt_reload = (timeout * (ffpi / wdt_clkdiv)) + wdt_pwl;
-
- printk("wdt_pwl=0x%x, wdt_clkdiv=%d, ffpi=%d, wdt_reload = 0x%x\n",
- wdt_pwl, wdt_clkdiv, ffpi, wdt_reload);
-
- if (wdt_reload > 0xFFFF)
- {
- printk ("timeout too large %d\n", timeout);
- retval = -EINVAL;
- goto out;
- }
-
- /* Write first part of password access */
- writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
-
- wdt_cr = readl(DANUBE_BIU_WDT_CR);
- wdt_cr &= (!DANUBE_BIU_WDT_CR_PW_SET(0xff) &
- !DANUBE_BIU_WDT_CR_PWL_SET(0x3) &
- !DANUBE_BIU_WDT_CR_CLKDIV_SET(0x3) &
- !DANUBE_BIU_WDT_CR_RELOAD_SET(0xffff));
-
- wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) |
- DANUBE_BIU_WDT_CR_PWL_SET(DANUBE_BIU_WDT_CR_PWL_GET(readl(DANUBE_BIU_WDT_CR))) |
- DANUBE_BIU_WDT_CR_CLKDIV_SET(DANUBE_BIU_WDT_CR_CLKDIV_GET(readl(DANUBE_BIU_WDT_CR))) |
- DANUBE_BIU_WDT_CR_RELOAD_SET(wdt_reload) |
- DANUBE_BIU_WDT_CR_GEN);
-
- writel(wdt_cr, DANUBE_BIU_WDT_CR);
-
- printk("watchdog enabled\n");
-
-out:
- return retval;
-}
-
-void
-danube_wdt_disable (void)
-{
- writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
- writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2), DANUBE_BIU_WDT_CR);
-
- printk("watchdog disabled\n");
-}
-
-/* passed LPEN or DSEN */
-void
-danube_wdt_enable_feature (int en, int type)
-{
- unsigned int wdt_cr = 0;
-
- writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
-
- wdt_cr = readl(DANUBE_BIU_WDT_CR);
-
- if (en)
- {
- wdt_cr &= (~DANUBE_BIU_WDT_CR_PW_SET(0xff));
- wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | type);
- } else {
- wdt_cr &= (~DANUBE_BIU_WDT_CR_PW_SET(0xff) & ~type);
- wdt_cr |= DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2);
- }
-
- writel(wdt_cr, DANUBE_BIU_WDT_CR);
-}
-
-void
-danube_wdt_prewarning_limit (int pwl)
-{
- unsigned int wdt_cr = 0;
-
- wdt_cr = readl(DANUBE_BIU_WDT_CR);
- writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
-
- wdt_cr &= 0xf300ffff;
- wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | DANUBE_BIU_WDT_CR_PWL_SET(pwl));
-
- /* Set reload value in second password access */
- writel(wdt_cr, DANUBE_BIU_WDT_CR);
-}
-
-void
-danube_wdt_set_clkdiv (int clkdiv)
-{
- unsigned int wdt_cr = 0;
-
- wdt_cr = readl(DANUBE_BIU_WDT_CR);
- writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
-
- wdt_cr &= 0xfc00ffff;
- wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | DANUBE_BIU_WDT_CR_CLKDIV_SET(clkdiv));
-
- /* Set reload value in second password access */
- writel(wdt_cr, DANUBE_BIU_WDT_CR);
-}
-
-static int
-danube_wdt_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
- unsigned long arg)
-{
- int result = 0;
- static int timeout = -1;
- unsigned int user_arg;
-
- if ((cmd != DANUBE_WDT_IOC_STOP) && (cmd != DANUBE_WDT_IOC_PING) && (cmd != DANUBE_WDT_IOC_GET_STATUS))
- {
- if (copy_from_user((void *) &user_arg, (void *) arg, sizeof (int))){
- result = -EINVAL;
- goto out;
- }
- }
-
- switch (cmd)
- {
- case DANUBE_WDT_IOC_START:
- if ((result = danube_wdt_enable(user_arg)) < 0)
- timeout = -1;
- else
- timeout = user_arg;
- break;
-
- case DANUBE_WDT_IOC_STOP:
- printk("disable watch dog timer\n");
- danube_wdt_disable();
- break;
-
- case DANUBE_WDT_IOC_PING:
- if (timeout < 0)
- result = -EIO;
- else
- result = danube_wdt_enable(timeout);
- break;
-
- case DANUBE_WDT_IOC_GET_STATUS:
- user_arg = readl(DANUBE_BIU_WDT_SR);
- copy_to_user((int*)arg, (int*)&user_arg, sizeof(int));
- break;
-
- case DANUBE_WDT_IOC_SET_PWL:
- danube_wdt_prewarning_limit(user_arg);
- break;
-
- case DANUBE_WDT_IOC_SET_DSEN:
- danube_wdt_enable_feature(user_arg, DANUBE_BIU_WDT_CR_DSEN);
- break;
-
- case DANUBE_WDT_IOC_SET_LPEN:
- danube_wdt_enable_feature(user_arg, DANUBE_BIU_WDT_CR_LPEN);
- break;
-
- case DANUBE_WDT_IOC_SET_CLKDIV:
- danube_wdt_set_clkdiv(user_arg);
- break;
-
- default:
- printk("unknown watchdog iotcl\n");
- }
-
-out:
- return result;
-}
-
-static int
-danube_wdt_open (struct inode *inode, struct file *file)
-{
- if (danube_wdt_inuse)
- return -EBUSY;
-
- danube_wdt_inuse = 1;
-
- return 0;
-}
-
-static int
-danube_wdt_release (struct inode *inode, struct file *file)
-{
- danube_wdt_inuse = 0;
-
- return 0;
-}
-
-int
-danube_wdt_register_proc_read (char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf (buf + len, "DANUBE_BIU_WDT_PROC_READ\n");
- len += sprintf (buf + len, "DANUBE_BIU_WDT_CR(0x%08x) : 0x%08x\n",
- (unsigned int)DANUBE_BIU_WDT_CR, readl(DANUBE_BIU_WDT_CR));
- len += sprintf (buf + len, "DANUBE_BIU_WDT_SR(0x%08x) : 0x%08x\n",
- (unsigned int)DANUBE_BIU_WDT_SR, readl(DANUBE_BIU_WDT_SR));
-
- *eof = 1;
-
- return len;
-}
-
-static struct file_operations wdt_fops = {
- .owner = THIS_MODULE,
- .ioctl = danube_wdt_ioctl,
- .open = danube_wdt_open,
- .release = danube_wdt_release,
-};
-
-int __init
-danube_wdt_init_module (void)
-{
- danube_wdt_major = register_chrdev(0, "wdt", &wdt_fops);
-
- if (danube_wdt_major < 0)
- {
- printk("cannot register watchdog device\n");
-
- return -EINVAL;
- }
-
- create_proc_read_entry("danube_wdt", 0, NULL, danube_wdt_register_proc_read, NULL);
-
- printk("danube watchdog loaded\n");
-
- return 0;
-}
-
-void
-danube_wdt_cleanup_module (void)
-{
- unregister_chrdev(danube_wdt_major, "wdt");
- remove_proc_entry("danube_wdt", NULL);
-}
-
-module_init(danube_wdt_init_module);
-module_exit(danube_wdt_cleanup_module);
diff --git a/target/linux/danube/files/drivers/mtd/maps/danube.c b/target/linux/danube/files/drivers/mtd/maps/danube.c
deleted file mode 100644
index 25e9df3de8..0000000000
--- a/target/linux/danube/files/drivers/mtd/maps/danube.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * Driver for DANUBE flashmap
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-
-#include <linux/init.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/cfi.h>
-#include <asm/danube/danube.h>
-#include <linux/magic.h>
-
-static struct map_info
-danube_map = {
- .name = "DANUBE_FLASH",
- .bankwidth = 2,
- .size = 0x400000,
-};
-
-static map_word
-danube_read16 (struct map_info * map, unsigned long adr)
-{
- map_word temp;
-
- adr ^= 2;
- temp.x[0] = *((__u16 *) (map->virt + adr));
-
- return temp;
-}
-
-static void
-danube_write16 (struct map_info *map, map_word d, unsigned long adr)
-{
- adr ^= 2;
- *((__u16 *) (map->virt + adr)) = d.x[0];
-}
-
-void
-danube_copy_from (struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
- u8 *p;
- u8 *to_8;
-
- from = (unsigned long) (from + map->virt);
- p = (u8 *) from;
- to_8 = (u8 *) to;
- while(len--){
- *to_8++ = *p++;
- }
-}
-
-void
-danube_copy_to (struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
- u8 *p = (u8*) from;
- u8 *to_8;
-
- to += (unsigned long) map->virt;
- to_8 = (u8*)to;
- while(len--){
- *p++ = *to_8++;
- }
-}
-
-static struct mtd_partition
-danube_partitions[4] = {
- {
- name:"U-Boot",
- offset:0x00000000,
- size:0x00020000,
- },
- {
- name:"U-Boot-Env",
- offset:0x00020000,
- size:0x00010000,
- },
- {
- name:"kernel",
- offset:0x00030000,
- size:0x0,
- },
- {
- name:"rootfs",
- offset:0x0,
- size:0x0,
- },
-};
-
-#define DANUBE_FLASH_START 0x10000000
-#define DANUBE_FLASH_MAX 0x2000000
-
-int
-find_uImage_size (unsigned long start_offset){
- unsigned long temp;
-
- danube_copy_from(&danube_map, &temp, start_offset + 12, 4);
- printk("kernel size is %ld \n", temp + 0x40);
- return temp + 0x40;
-}
-
-int
-detect_squashfs_partition (unsigned long start_offset){
- unsigned long temp;
-
- danube_copy_from(&danube_map, &temp, start_offset, 4);
-
- return (temp == SQUASHFS_MAGIC);
-}
-
-int __init
-init_danube_mtd (void)
-{
- struct mtd_info *danube_mtd = NULL;
- struct mtd_partition *parts = NULL;
- unsigned long uimage_size;
-
- writel(0x1d7ff, DANUBE_EBU_BUSCON0);
-
- danube_map.read = danube_read16;
- danube_map.write = danube_write16;
- danube_map.copy_from = danube_copy_from;
- danube_map.copy_to = danube_copy_to;
-
- danube_map.phys = DANUBE_FLASH_START;
- danube_map.virt = ioremap_nocache(DANUBE_FLASH_START, DANUBE_FLASH_MAX);
- danube_map.size = DANUBE_FLASH_MAX;
- if (!danube_map.virt) {
- printk(KERN_WARNING "Failed to ioremap!\n");
- return -EIO;
- }
-
- danube_mtd = (struct mtd_info *) do_map_probe("cfi_probe", &danube_map);
- if (!danube_mtd) {
- iounmap(danube_map.virt);
- printk("probing failed\n");
- return -ENXIO;
- }
-
- danube_mtd->owner = THIS_MODULE;
-
- uimage_size = find_uImage_size(danube_partitions[2].offset);
-
- if(detect_squashfs_partition(danube_partitions[2].offset + uimage_size)){
- printk("Found a squashfs following the uImage\n");
- } else {
- uimage_size &= ~0xffff;
- uimage_size += 0x10000;
- }
-
- danube_partitions[2].size = uimage_size;
- danube_partitions[3].offset = danube_partitions[2].offset + danube_partitions[2].size;
- danube_partitions[3].size = ((danube_mtd->size >> 20) * 1024 * 1024) - danube_partitions[3].offset;
-
- parts = &danube_partitions[0];
- add_mtd_partitions(danube_mtd, parts, 4);
-
- printk("Added danube flash with %dMB\n", danube_mtd->size >> 20);
- return 0;
-}
-
-static void
-__exit
-cleanup_danube_mtd (void)
-{
-}
-
-module_init (init_danube_mtd);
-module_exit (cleanup_danube_mtd);
-
-MODULE_LICENSE ("GPL");
-MODULE_AUTHOR ("John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION ("MTD map driver for DANUBE boards");
diff --git a/target/linux/danube/files/drivers/net/danube_mii0.c b/target/linux/danube/files/drivers/net/danube_mii0.c
deleted file mode 100644
index 354ccc36d1..0000000000
--- a/target/linux/danube/files/drivers/net/danube_mii0.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * drivers/net/danube_mii0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 Infineon
- *
- * Rewrite of Infineon Danube code, thanks to infineon for the support,
- * software and hardware
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/uaccess.h>
-#include <linux/in.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/skbuff.h>
-#include <linux/mm.h>
-#include <linux/ethtool.h>
-#include <asm/checksum.h>
-#include <linux/init.h>
-#include <asm/delay.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_mii0.h>
-#include <asm/danube/danube_dma.h>
-#include <asm/danube/danube_pmu.h>
-
-static struct net_device danube_mii0_dev;
-static unsigned char u_boot_ethaddr[MAX_ADDR_LEN];
-
-void
-danube_write_mdio (u32 phy_addr, u32 phy_reg, u16 phy_data)
-{
- u32 val = MDIO_ACC_REQUEST |
- ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
- ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET) |
- phy_data;
-
- while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST);
- writel(val, DANUBE_PPE32_MDIO_ACC);
-}
-
-unsigned short
-danube_read_mdio (u32 phy_addr, u32 phy_reg)
-{
- u32 val = MDIO_ACC_REQUEST | MDIO_ACC_READ |
- ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
- ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET);
-
- writel(val, DANUBE_PPE32_MDIO_ACC);
- while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST){};
- val = readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_VAL_MASK;
-
- return val;
-}
-
-int
-danube_switch_open (struct net_device *dev)
-{
- struct switch_priv* priv = (struct switch_priv*)dev->priv;
- struct dma_device_info* dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->max_rx_chan_num; i++)
- {
- if ((dma_dev->rx_chan[i])->control == DANUBE_DMA_CH_ON)
- (dma_dev->rx_chan[i])->open(dma_dev->rx_chan[i]);
- }
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-int
-switch_release (struct net_device *dev){
- struct switch_priv* priv = (struct switch_priv*)dev->priv;
- struct dma_device_info* dma_dev = priv->dma_device;
- int i;
-
- for (i = 0; i < dma_dev->max_rx_chan_num; i++)
- dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]);
-
- netif_stop_queue(dev);
-
- return 0;
-}
-
-int
-switch_hw_receive (struct net_device* dev,struct dma_device_info* dma_dev)
-{
- struct switch_priv *priv = (struct switch_priv*)dev->priv;
- unsigned char* buf = NULL;
- struct sk_buff *skb = NULL;
- int len = 0;
-
- len = dma_device_read(dma_dev, &buf, (void**)&skb);
-
- if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE)
- {
- printk("packet too large %d\n",len);
- goto switch_hw_receive_err_exit;
- }
-
- /* remove CRC */
- len -= 4;
- if (skb == NULL )
- {
- printk("cannot restore pointer\n");
- goto switch_hw_receive_err_exit;
- }
-
- if (len > (skb->end - skb->tail))
- {
- printk("BUG, len:%d end:%p tail:%p\n", (len+4), skb->end, skb->tail);
- goto switch_hw_receive_err_exit;
- }
-
- skb_put(skb, len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
-
- priv->stats.rx_packets++;
- priv->stats.rx_bytes += len;
-
- return 0;
-
-switch_hw_receive_err_exit:
- if (len == 0)
- {
- if(skb)
- dev_kfree_skb_any(skb);
- priv->stats.rx_errors++;
- priv->stats.rx_dropped++;
-
- return -EIO;
- } else {
- return len;
- }
-}
-
-int
-switch_hw_tx (char *buf, int len, struct net_device *dev)
-{
- int ret = 0;
- struct switch_priv *priv = dev->priv;
- struct dma_device_info* dma_dev = priv->dma_device;
-
- ret = dma_device_write(dma_dev, buf, len, priv->skb);
-
- return ret;
-}
-
-int
-switch_tx (struct sk_buff *skb, struct net_device *dev)
-{
- int len;
- char *data;
- struct switch_priv *priv = dev->priv;
- struct dma_device_info* dma_dev = priv->dma_device;
-
- len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
- data = skb->data;
- priv->skb = skb;
- dev->trans_start = jiffies;
- // TODO we got more than 1 dma channel, so we should do something intelligent
- // here to select one
- dma_dev->current_tx_chan = 0;
-
- wmb();
-
- if (switch_hw_tx(data, len, dev) != len)
- {
- dev_kfree_skb_any(skb);
- priv->stats.tx_errors++;
- priv->stats.tx_dropped++;
- } else {
- priv->stats.tx_packets++;
- priv->stats.tx_bytes+=len;
- }
-
- return 0;
-}
-
-void
-switch_tx_timeout (struct net_device *dev)
-{
- int i;
- struct switch_priv* priv = (struct switch_priv*)dev->priv;
-
- priv->stats.tx_errors++;
-
- for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
- {
- priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]);
- }
-
- netif_wake_queue(dev);
-
- return;
-}
-
-int
-dma_intr_handler (struct dma_device_info* dma_dev, int status)
-{
- int i;
-
- switch (status)
- {
- case RCV_INT:
- switch_hw_receive(&danube_mii0_dev, dma_dev);
- break;
-
- case TX_BUF_FULL_INT:
- printk("tx buffer full\n");
- netif_stop_queue(&danube_mii0_dev);
- for (i = 0; i < dma_dev->max_tx_chan_num; i++)
- {
- if ((dma_dev->tx_chan[i])->control==DANUBE_DMA_CH_ON)
- dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]);
- }
- break;
-
- case TRANSMIT_CPT_INT:
- for (i = 0; i < dma_dev->max_tx_chan_num; i++)
- dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]);
-
- netif_wake_queue(&danube_mii0_dev);
- break;
- }
-
- return 0;
-}
-
-unsigned char*
-danube_etop_dma_buffer_alloc (int len, int *byte_offset, void **opt)
-{
- unsigned char *buffer = NULL;
- struct sk_buff *skb = NULL;
-
- skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
- if (skb == NULL)
- return NULL;
-
- buffer = (unsigned char*)(skb->data);
- skb_reserve(skb, 2);
- *(int*)opt = (int)skb;
- *byte_offset = 2;
-
- return buffer;
-}
-
-void
-danube_etop_dma_buffer_free (unsigned char *dataptr, void *opt)
-{
- struct sk_buff *skb = NULL;
-
- if(opt == NULL)
- {
- kfree(dataptr);
- } else {
- skb = (struct sk_buff*)opt;
- dev_kfree_skb_any(skb);
- }
-}
-
-static struct net_device_stats*
-danube_get_stats (struct net_device *dev)
-{
- return (struct net_device_stats *)dev->priv;
-}
-
-static int
-switch_init (struct net_device *dev)
-{
- u64 retval = 0;
- int i;
- struct switch_priv *priv;
-
- ether_setup(dev);
-
- printk("%s up\n", dev->name);
-
- dev->open = danube_switch_open;
- dev->stop = switch_release;
- dev->hard_start_xmit = switch_tx;
- dev->get_stats = danube_get_stats;
- dev->tx_timeout = switch_tx_timeout;
- dev->watchdog_timeo = 10 * HZ;
- dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL);
-
- if (dev->priv == NULL)
- return -ENOMEM;
-
- memset(dev->priv, 0, sizeof(struct switch_priv));
- priv = dev->priv;
-
- priv->dma_device = dma_device_reserve("PPE");
-
- if (!priv->dma_device){
- BUG();
- return -ENODEV;
- }
-
- priv->dma_device->buffer_alloc = &danube_etop_dma_buffer_alloc;
- priv->dma_device->buffer_free = &danube_etop_dma_buffer_free;
- priv->dma_device->intr_handler = &dma_intr_handler;
- priv->dma_device->max_rx_chan_num = 4;
-
- for (i = 0; i < priv->dma_device->max_rx_chan_num; i++)
- {
- priv->dma_device->rx_chan[i]->packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
- priv->dma_device->rx_chan[i]->control = DANUBE_DMA_CH_ON;
- }
-
- for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
- {
- if(i == 0)
- priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_ON;
- else
- priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_OFF;
- }
-
- dma_device_register(priv->dma_device);
-
- /*read the mac address from the mac table and put them into the mac table.*/
- for (i = 0; i < 6; i++)
- {
- retval += u_boot_ethaddr[i];
- }
-
- //TODO
- /* ethaddr not set in u-boot ? */
- if (retval == 0)
- {
- printk("use default MAC address\n");
- dev->dev_addr[0] = 0x00;
- dev->dev_addr[1] = 0x11;
- dev->dev_addr[2] = 0x22;
- dev->dev_addr[3] = 0x33;
- dev->dev_addr[4] = 0x44;
- dev->dev_addr[5] = 0x55;
- } else {
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = u_boot_ethaddr[i];
- }
-
- return 0;
-}
-
-static void
-danube_sw_chip_init (int mode)
-{
- danube_pmu_enable(DANUBE_PMU_PWDCR_DMA);
- danube_pmu_enable(DANUBE_PMU_PWDCR_PPE);
-
- if(mode == REV_MII_MODE)
- writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_REVERSE, DANUBE_PPE32_CFG);
- else if(mode == MII_MODE)
- writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_NORMAL, DANUBE_PPE32_CFG);
-
- writel(PPE32_PLEN_UNDER | PPE32_PLEN_OVER, DANUBE_PPE32_IG_PLEN_CTRL);
-
- writel(PPE32_CGEN, DANUBE_PPE32_ENET_MAC_CFG);
-
- wmb();
-}
-
-int __init
-switch_init_module(void)
-{
- int result = 0;
-
- danube_mii0_dev.init = switch_init;
-
- strcpy(danube_mii0_dev.name, "eth%d");
- SET_MODULE_OWNER(dev);
-
- result = register_netdev(&danube_mii0_dev);
- if (result)
- {
- printk("error %i registering device \"%s\"\n", result, danube_mii0_dev.name);
- goto out;
- }
-
- /* danube eval kit connects the phy/switch in REV mode */
- danube_sw_chip_init(REV_MII_MODE);
- printk("danube MAC driver loaded!\n");
-
-out:
- return result;
-}
-
-static void __exit
-switch_cleanup(void)
-{
- struct switch_priv *priv = (struct switch_priv*)danube_mii0_dev.priv;
-
- printk("danube_mii0 cleanup\n");
-
- dma_device_unregister(priv->dma_device);
- dma_device_release(priv->dma_device);
- kfree(priv->dma_device);
- kfree(danube_mii0_dev.priv);
- unregister_netdev(&danube_mii0_dev);
-
- return;
-}
-
-module_init(switch_init_module);
-module_exit(switch_cleanup);
diff --git a/target/linux/danube/files/drivers/serial/danube_asc.c b/target/linux/danube/files/drivers/serial/danube_asc.c
deleted file mode 100644
index b50b1e7bee..0000000000
--- a/target/linux/danube/files/drivers/serial/danube_asc.c
+++ /dev/null
@@ -1,608 +0,0 @@
-/*
- * Driver for DANUBEASC serial ports
- *
- * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) 2004 Infineon IFAP DC COM CPE
- * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/bitops.h>
-#include <asm/danube/danube.h>
-#include <asm/danube/danube_irq.h>
-#include <asm/danube/danube_serial.h>
-
-#define PORT_DANUBEASC 111
-
-#include <linux/serial_core.h>
-
-#define UART_DUMMY_UER_RX 1
-
-static void danubeasc_tx_chars(struct uart_port *port);
-extern void prom_printf(const char * fmt, ...);
-static struct uart_port danubeasc_port;
-static struct uart_driver danubeasc_reg;
-static unsigned int uartclk = 0;
-extern unsigned int danube_get_fpi_hz(void);
-
-static void
-danubeasc_stop_tx (struct uart_port *port)
-{
- /* fifo underrun shuts up after firing once */
- return;
-}
-
-static void
-danubeasc_start_tx (struct uart_port *port)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- danubeasc_tx_chars(port);
- local_irq_restore(flags);
-
- return;
-}
-
-static void
-danubeasc_stop_rx (struct uart_port *port)
-{
- /* clear the RX enable bit */
- writel(ASCWHBSTATE_CLRREN, DANUBE_ASC1_WHBSTATE);
-}
-
-static void
-danubeasc_enable_ms (struct uart_port *port)
-{
- /* no modem signals */
- return;
-}
-
-static void
-danubeasc_rx_chars (struct uart_port *port)
-{
- struct tty_struct *tty = port->info->tty;
- unsigned int ch = 0, rsr = 0, fifocnt;
-
- fifocnt = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_RXFFLMASK;
- while (fifocnt--)
- {
- u8 flag = TTY_NORMAL;
- ch = readl(DANUBE_ASC1_RBUF);
- rsr = (readl(DANUBE_ASC1_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX;
- tty_flip_buffer_push(tty);
- port->icount.rx++;
-
- /*
- * Note that the error handling code is
- * out of the main execution path
- */
- if (rsr & ASCSTATE_ANY) {
- if (rsr & ASCSTATE_PE) {
- port->icount.parity++;
- writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE, DANUBE_ASC1_WHBSTATE);
- } else if (rsr & ASCSTATE_FE) {
- port->icount.frame++;
- writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRFE, DANUBE_ASC1_WHBSTATE);
- }
- if (rsr & ASCSTATE_ROE) {
- port->icount.overrun++;
- writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE);
- }
-
- rsr &= port->read_status_mask;
-
- if (rsr & ASCSTATE_PE)
- flag = TTY_PARITY;
- else if (rsr & ASCSTATE_FE)
- flag = TTY_FRAME;
- }
-
- if ((rsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
-
- if (rsr & ASCSTATE_ROE)
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
- if (ch != 0)
- tty_flip_buffer_push(tty);
-
- return;
-}
-
-
-static void
-danubeasc_tx_chars (struct uart_port *port)
-{
- struct circ_buf *xmit = &port->info->xmit;
-
- if (uart_tx_stopped(port)) {
- danubeasc_stop_tx(port);
- return;
- }
-
- while(((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF) != DANUBEASC_TXFIFO_FULL)
- {
- if (port->x_char) {
- writel(port->x_char, DANUBE_ASC1_TBUF);
- port->icount.tx++;
- port->x_char = 0;
- continue;
- }
-
- if (uart_circ_empty(xmit))
- break;
-
- writel(port->info->xmit.buf[port->info->xmit.tail], DANUBE_ASC1_TBUF);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- }
-
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
-}
-
-static irqreturn_t
-danubeasc_tx_int (int irq, void *port)
-{
- writel(ASC_IRNCR_TIR, DANUBE_ASC1_IRNCR);
- danubeasc_start_tx(port);
- mask_and_ack_danube_irq(irq);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t
-danubeasc_er_int (int irq, void *port)
-{
- /* clear any pending interrupts */
- writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE |
- ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t
-danubeasc_rx_int (int irq, void *port)
-{
- writel(ASC_IRNCR_RIR, DANUBE_ASC1_IRNCR);
- danubeasc_rx_chars((struct uart_port *) port);
- mask_and_ack_danube_irq(irq);
-
- return IRQ_HANDLED;
-}
-
-static unsigned int
-danubeasc_tx_empty (struct uart_port *port)
-{
- int status;
-
- status = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK;
-
- return status ? 0 : TIOCSER_TEMT;
-}
-
-static unsigned int
-danubeasc_get_mctrl (struct uart_port *port)
-{
- return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
-}
-
-static void
-danubeasc_set_mctrl (struct uart_port *port, u_int mctrl)
-{
- return;
-}
-
-static void
-danubeasc_break_ctl (struct uart_port *port, int break_state)
-{
- return;
-}
-
-static void
-danubeasc1_hw_init (void)
-{
- /* this setup was probably already done in ROM/u-boot but we do it again*/
- /* TODO: GPIO pins are multifunction */
- writel(readl(DANUBE_ASC1_CLC) & ~DANUBE_ASC1_CLC_DISS, DANUBE_ASC1_CLC);
- writel((readl(DANUBE_ASC1_CLC) & ~ASCCLC_RMCMASK) | (1 << ASCCLC_RMCOFFSET), DANUBE_ASC1_CLC);
- writel(0, DANUBE_ASC1_PISEL);
- writel(((DANUBEASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) &
- ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON);
- writel(((DANUBEASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) &
- ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON);
- wmb ();
-
- /*framing, overrun, enable */
- writel(readl(DANUBE_ASC1_CON) | ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN,
- DANUBE_ASC1_CON);
-}
-
-static int
-danubeasc_startup (struct uart_port *port)
-{
- unsigned long flags;
- int retval;
-
- /* this assumes: CON.BRS = CON.FDE = 0 */
- if (uartclk == 0)
- uartclk = danube_get_fpi_hz();
-
- danubeasc_port.uartclk = uartclk;
-
- danubeasc1_hw_init();
-
- local_irq_save(flags);
-
- retval = request_irq(DANUBEASC1_RIR, danubeasc_rx_int, IRQF_DISABLED, "asc_rx", port);
- if (retval){
- printk("failed to request danubeasc_rx_int\n");
- return retval;
- }
-
- retval = request_irq(DANUBEASC1_TIR, danubeasc_tx_int, IRQF_DISABLED, "asc_tx", port);
- if (retval){
- printk("failed to request danubeasc_tx_int\n");
- goto err1;
- }
-
- retval = request_irq(DANUBEASC1_EIR, danubeasc_er_int, IRQF_DISABLED, "asc_er", port);
- if (retval){
- printk("failed to request danubeasc_er_int\n");
- goto err2;
- }
-
- writel(ASC_IRNREN_RX_BUF | ASC_IRNREN_TX_BUF | ASC_IRNREN_ERR | ASC_IRNREN_TX,
- DANUBE_ASC1_IRNREN);
-
- local_irq_restore(flags);
-
- return 0;
-
-err2:
- free_irq(DANUBEASC1_TIR, port);
-
-err1:
- free_irq(DANUBEASC1_RIR, port);
- local_irq_restore(flags);
-
- return retval;
-}
-
-static void
-danubeasc_shutdown (struct uart_port *port)
-{
- free_irq(DANUBEASC1_RIR, port);
- free_irq(DANUBEASC1_TIR, port);
- free_irq(DANUBEASC1_EIR, port);
- /*
- * disable the baudrate generator to disable the ASC
- */
- writel(0, DANUBE_ASC1_CON);
-
- /* flush and then disable the fifos */
- writel(readl(DANUBE_ASC1_RXFCON) | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON);
- writel(readl(DANUBE_ASC1_RXFCON) & ~ASCRXFCON_RXFEN, DANUBE_ASC1_RXFCON);
- writel(readl(DANUBE_ASC1_TXFCON) | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON);
- writel(readl(DANUBE_ASC1_TXFCON) & ~ASCTXFCON_TXFEN, DANUBE_ASC1_TXFCON);
-}
-
-static void danubeasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
-{
- unsigned int cflag;
- unsigned int iflag;
- unsigned int quot;
- unsigned int baud;
- unsigned int con = 0;
- unsigned long flags;
-
- cflag = new->c_cflag;
- iflag = new->c_iflag;
-
- /* byte size and parity */
- switch (cflag & CSIZE) {
- case CS7:
- con = ASCCON_M_7ASYNC;
- break;
-
- case CS5:
- case CS6:
- default:
- con = ASCCON_M_8ASYNC;
- break;
- }
-
- if (cflag & CSTOPB)
- con |= ASCCON_STP;
-
- if (cflag & PARENB) {
- if (!(cflag & PARODD))
- con &= ~ASCCON_ODD;
- else
- con |= ASCCON_ODD;
- }
-
- port->read_status_mask = ASCSTATE_ROE;
- if (iflag & INPCK)
- port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
-
- port->ignore_status_mask = 0;
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
-
- if (iflag & IGNBRK) {
- /*
- * If we're ignoring parity and break indicators,
- * ignore overruns too (for real raw support).
- */
- if (iflag & IGNPAR)
- port->ignore_status_mask |= ASCSTATE_ROE;
- }
-
- if ((cflag & CREAD) == 0)
- port->ignore_status_mask |= UART_DUMMY_UER_RX;
-
- /* set error signals - framing, parity and overrun, enable receiver */
- con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
-
- local_irq_save(flags);
-
- /* set up CON */
- writel(readl(DANUBE_ASC1_CON) | con, DANUBE_ASC1_CON);
-
- /* Set baud rate - take a divider of 2 into account */
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
- quot = uart_get_divisor(port, baud);
- quot = quot / 2 - 1;
-
- /* disable the baudrate generator */
- writel(readl(DANUBE_ASC1_CON) & ~ASCCON_R, DANUBE_ASC1_CON);
-
- /* make sure the fractional divider is off */
- writel(readl(DANUBE_ASC1_CON) & ~ASCCON_FDE, DANUBE_ASC1_CON);
-
- /* set up to use divisor of 2 */
- writel(readl(DANUBE_ASC1_CON) & ~ASCCON_BRS, DANUBE_ASC1_CON);
-
- /* now we can write the new baudrate into the register */
- writel(quot, DANUBE_ASC1_BG);
-
- /* turn the baudrate generator back on */
- writel(readl(DANUBE_ASC1_CON) | ASCCON_R, DANUBE_ASC1_CON);
-
- /* enable rx */
- writel(ASCWHBSTATE_SETREN, DANUBE_ASC1_WHBSTATE);
-
- local_irq_restore(flags);
-}
-
-static const char*
-danubeasc_type (struct uart_port *port)
-{
- return port->type == PORT_DANUBEASC ? "DANUBEASC" : NULL;
-}
-
-static void
-danubeasc_release_port (struct uart_port *port)
-{
- return;
-}
-
-static int
-danubeasc_request_port (struct uart_port *port)
-{
- return 0;
-}
-
-static void
-danubeasc_config_port (struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = PORT_DANUBEASC;
- danubeasc_request_port(port);
- }
-}
-
-static int
-danubeasc_verify_port (struct uart_port *port, struct serial_struct *ser)
-{
- int ret = 0;
- if (ser->type != PORT_UNKNOWN && ser->type != PORT_DANUBEASC)
- ret = -EINVAL;
- if (ser->irq < 0 || ser->irq >= NR_IRQS)
- ret = -EINVAL;
- if (ser->baud_base < 9600)
- ret = -EINVAL;
- return ret;
-}
-
-static struct uart_ops danubeasc_pops = {
- .tx_empty = danubeasc_tx_empty,
- .set_mctrl = danubeasc_set_mctrl,
- .get_mctrl = danubeasc_get_mctrl,
- .stop_tx = danubeasc_stop_tx,
- .start_tx = danubeasc_start_tx,
- .stop_rx = danubeasc_stop_rx,
- .enable_ms = danubeasc_enable_ms,
- .break_ctl = danubeasc_break_ctl,
- .startup = danubeasc_startup,
- .shutdown = danubeasc_shutdown,
- .set_termios = danubeasc_set_termios,
- .type = danubeasc_type,
- .release_port = danubeasc_release_port,
- .request_port = danubeasc_request_port,
- .config_port = danubeasc_config_port,
- .verify_port = danubeasc_verify_port,
-};
-
-static struct uart_port danubeasc_port = {
- membase: (void *)DANUBE_ASC1_BASE_ADDR,
- mapbase: DANUBE_ASC1_BASE_ADDR,
- iotype: SERIAL_IO_MEM,
- irq: DANUBEASC1_RIR,
- uartclk: 0,
- fifosize: 16,
- unused: {DANUBEASC1_TIR, DANUBEASC1_EIR},
- type: PORT_DANUBEASC,
- ops: &danubeasc_pops,
- flags: ASYNC_BOOT_AUTOCONF,
-};
-
-static void
-danubeasc_console_write (struct console *co, const char *s, u_int count)
-{
- int i, fifocnt;
- unsigned long flags;
-
- local_irq_save(flags);
- for (i = 0; i < count; i++)
- {
- /* wait until the FIFO is not full */
- do
- {
- fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == DANUBEASC_TXFIFO_FULL);
-
- if (s[i] == '\0')
- {
- break;
- }
-
- if (s[i] == '\n')
- {
- writel('\r', DANUBE_ASC1_TBUF);
- do
- {
- fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
- >> ASCFSTAT_TXFFLOFF;
- } while (fifocnt == DANUBEASC_TXFIFO_FULL);
- }
- writel(s[i], DANUBE_ASC1_TBUF);
- }
-
- local_irq_restore(flags);
-}
-
-static int __init
-danubeasc_console_setup (struct console *co, char *options)
-{
- struct uart_port *port;
- int baud = 115200;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- if (uartclk == 0)
- uartclk = danube_get_fpi_hz();
- co->index = 0;
- port = &danubeasc_port;
- danubeasc_port.uartclk = uartclk;
- danubeasc_port.type = PORT_DANUBEASC;
-
- if (options){
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- }
-
- return uart_set_options(port, co, baud, parity, bits, flow);
-}
-
-static struct uart_driver danubeasc_reg;
-static struct console danubeasc_console = {
- name: "ttyS",
- write: danubeasc_console_write,
- device: uart_console_device,
- setup: danubeasc_console_setup,
- flags: CON_PRINTBUFFER,
- index: -1,
- data: &danubeasc_reg,
-};
-
-static int __init
-danubeasc_console_init (void)
-{
- register_console(&danubeasc_console);
- return 0;
-}
-console_initcall(danubeasc_console_init);
-
-static struct uart_driver danubeasc_reg = {
- .owner = THIS_MODULE,
- .driver_name = "serial",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
- .minor = 64,
- .nr = 1,
- .cons = &danubeasc_console,
-};
-
-static int __init
-danubeasc_init (void)
-{
- unsigned char res;
-
- uart_register_driver(&danubeasc_reg);
- res = uart_add_one_port(&danubeasc_reg, &danubeasc_port);
-
- return res;
-}
-
-static void __exit
-danubeasc_exit (void)
-{
- uart_unregister_driver(&danubeasc_reg);
-}
-
-module_init(danubeasc_init);
-module_exit(danubeasc_exit);
-
-MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
-MODULE_DESCRIPTION("MIPS Danube serial port driver");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube.h b/target/linux/danube/files/include/asm-mips/danube/danube.h
deleted file mode 100644
index 5bad876e1f..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _DANUBE_H__
-#define _DANUBE_H__
-
-
-/*------------ GENERAL */
-
-#define BOARD_SYSTEM_TYPE "DANUBE"
-
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
-
-
-/*------------ ASC1 */
-
-#define DANUBE_ASC1_BASE_ADDR (KSEG1 + 0x1E100C00)
-
-/* FIFO status register */
-#define DANUBE_ASC1_FSTAT ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0048))
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-/* ASC1 transmit buffer */
-#define DANUBE_ASC1_TBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0020))
-
-/* channel operating modes */
-#define ASCOPT_CSIZE 0x3
-#define ASCOPT_CS7 0x1
-#define ASCOPT_CS8 0x2
-#define ASCOPT_PARENB 0x4
-#define ASCOPT_STOPB 0x8
-#define ASCOPT_PARODD 0x0
-#define ASCOPT_CREAD 0x20
-
-/* hardware modified control register */
-#define DANUBE_ASC1_WHBSTATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0018))
-
-/* receive buffer register */
-#define DANUBE_ASC1_RBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0024))
-
-/* status register */
-#define DANUBE_ASC1_STATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0014))
-
-/* interrupt control */
-#define DANUBE_ASC1_IRNCR ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F8))
-
-#define ASC_IRNCR_TIR 0x4
-#define ASC_IRNCR_RIR 0x2
-#define ASC_IRNCR_EIR 0x4
-
-/* clock control */
-#define DANUBE_ASC1_CLC ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0000))
-
-#define DANUBE_ASC1_CLC_DISS 0x2
-
-/* port input select register */
-#define DANUBE_ASC1_PISEL ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0004))
-
-/* tx fifo */
-#define DANUBE_ASC1_TXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0044))
-
-/* rx fifo */
-#define DANUBE_ASC1_RXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0040))
-
-/* control */
-#define DANUBE_ASC1_CON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0010))
-
-/* timer reload */
-#define DANUBE_ASC1_BG ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0050))
-
-/* int enable */
-#define DANUBE_ASC1_IRNREN ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F4))
-
-#define ASC_IRNREN_RX_BUF 0x8
-#define ASC_IRNREN_TX_BUF 0x4
-#define ASC_IRNREN_ERR 0x2
-#define ASC_IRNREN_TX 0x1
-
-
-/*------------ RCU */
-
-#define DANUBE_RCU_BASE_ADDR 0xBF203000
-
-/* reset request */
-#define DANUBE_RCU_REQ ((u32*)(DANUBE_RCU_BASE_ADDR + 0x0010))
-#define DANUBE_RST_ALL 0x40000000
-
-
-/*------------ MCD */
-
-#define DANUBE_MCD_BASE_ADDR (KSEG1 + 0x1F106000)
-
-/* chip id */
-#define DANUBE_MCD_CHIPID ((u32*)(DANUBE_MCD_BASE_ADDR + 0x0028))
-
-
-/*------------ GPTU */
-
-#define DANUBE_GPTU_BASE_ADDR 0xB8000300
-
-/* clock control register */
-#define DANUBE_GPTU_GPT_CLC ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0000))
-
-/* captur reload register */
-#define DANUBE_GPTU_GPT_CAPREL ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0030))
-
-/* timer 6 control register */
-#define DANUBE_GPTU_GPT_T6CON ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0020))
-
-
-/*------------ EBU */
-
-#define DANUBE_EBU_BASE_ADDR 0xBE105300
-
-/* bus configuration register */
-#define DANUBE_EBU_BUSCON0 ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0060))
-#define DANUBE_EBU_PCC_CON ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0090))
-#define DANUBE_EBU_PCC_IEN ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A4))
-#define DANUBE_EBU_PCC_ISTAT ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A0))
-
-
-/*------------ CGU */
-
-#define DANUBE_CGU_BASE_ADDR 0xBF103000
-
-/* clock mux */
-#define DANUBE_CGU_SYS ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0010))
-#define DANUBE_CGU_IFCCR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0018))
-#define DANUBE_CGU_PCICR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0034))
-
-#define CLOCK_60M 60000000
-#define CLOCK_83M 83333333
-#define CLOCK_111M 111111111
-#define CLOCK_133M 133333333
-#define CLOCK_167M 166666667
-#define CLOCK_333M 333333333
-
-
-/*------------ CGU */
-
-#define DANUBE_PMU_BASE_ADDR (KSEG1 + 0x1F102000)
-
-#define DANUBE_PMU_PWDCR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x001C))
-#define DANUBE_PMU_PWDSR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x0020))
-
-
-/*------------ ICU */
-
-#define DANUBE_ICU_BASE_ADDR 0xBF880200
-
-
-#define DANUBE_ICU_IM0_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0000))
-#define DANUBE_ICU_IM0_IER ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0008))
-#define DANUBE_ICU_IM0_IOSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0010))
-#define DANUBE_ICU_IM0_IRSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0018))
-#define DANUBE_ICU_IM0_IMR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0020))
-
-#define DANUBE_ICU_IM1_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0028))
-
-#define DANUBE_ICU_OFFSET (DANUBE_ICU_IM1_ISR - DANUBE_ICU_IM0_ISR)
-
-
-/*------------ ETOP */
-
-#define DANUBE_PPE32_BASE_ADDR 0xBE180000
-
-#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
-
-#define DANUBE_PPE32_MEM_MAP (DANUBE_PPE32_BASE_ADDR + 0x10000 )
-
-#define MII_MODE 1
-
-#define REV_MII_MODE 2
-
-/* mdio access */
-#define DANUBE_PPE32_MDIO_ACC ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1804))
-
-#define MDIO_ACC_REQUEST 0x80000000
-#define MDIO_ACC_READ 0x40000000
-#define MDIO_ACC_ADDR_MASK 0x1f
-#define MDIO_ACC_ADDR_OFFSET 0x15
-#define MDIO_ACC_REG_MASK 0xff
-#define MDIO_ACC_REG_OFFSET 0x10
-#define MDIO_ACC_VAL_MASK 0xffff
-
-/* configuration */
-#define DANUBE_PPE32_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1808))
-
-#define PPE32_MII_MASK 0xfffffffc
-#define PPE32_MII_NORMAL 0x8
-#define PPE32_MII_REVERSE 0xe
-
-/* packet length */
-#define DANUBE_PPE32_IG_PLEN_CTRL ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1820))
-
-#define PPE32_PLEN_OVER 0x5ee
-#define PPE32_PLEN_UNDER 0x400000
-
-/* enet */
-#define DANUBE_PPE32_ENET_MAC_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1840))
-
-#define PPE32_CGEN 0x800
-
-
-/*------------ DMA */
-#define DANUBE_DMA_BASE_ADDR 0xBE104100
-
-#define DANUBE_DMA_CS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x18))
-#define DANUBE_DMA_CIE ((u32*)(DANUBE_DMA_BASE_ADDR + 0x2C))
-#define DANUBE_DMA_IRNEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0xf4))
-#define DANUBE_DMA_CCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x1C))
-#define DANUBE_DMA_CIS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x28))
-#define DANUBE_DMA_CDLEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0x24))
-#define DANUBE_DMA_PS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x40))
-#define DANUBE_DMA_PCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x44))
-#define DANUBE_DMA_CTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x10))
-#define DANUBE_DMA_CPOLL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x14))
-#define DANUBE_DMA_CDBA ((u32*)(DANUBE_DMA_BASE_ADDR + 0x20))
-
-
-/*------------ PCI */
-#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400)
-
-#define PCI_CR_FCI_ADDR_MAP0 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C0))
-#define PCI_CR_FCI_ADDR_MAP1 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C4))
-#define PCI_CR_FCI_ADDR_MAP2 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C8))
-#define PCI_CR_FCI_ADDR_MAP3 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00CC))
-#define PCI_CR_FCI_ADDR_MAP4 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D0))
-#define PCI_CR_FCI_ADDR_MAP5 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D4))
-#define PCI_CR_FCI_ADDR_MAP6 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D8))
-#define PCI_CR_FCI_ADDR_MAP7 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00DC))
-#define PCI_CR_CLK_CTRL ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0000))
-#define PCI_CR_PCI_MOD ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0030))
-#define PCI_CR_PC_ARB ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0080))
-#define PCI_CR_FCI_ADDR_MAP11hg ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E4))
-#define PCI_CR_BAR11MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0044))
-#define PCI_CR_BAR12MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0048))
-#define PCI_CR_BAR13MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x004C))
-#define PCI_CS_BASE_ADDR1 ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0010))
-#define PCI_CR_PCI_ADDR_MAP11 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0064))
-#define PCI_CR_FCI_BURST_LENGTH ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E8))
-#define PCI_CR_PCI_EOI ((u32*)(PCI_CR_PR_BASE_ADDR + 0x002C))
-
-#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000)
-
-#define PCI_CS_STS_CMD ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0004))
-
-#define PCI_MASTER0_REQ_MASK_2BITS 8
-#define PCI_MASTER1_REQ_MASK_2BITS 10
-#define PCI_MASTER2_REQ_MASK_2BITS 12
-#define INTERNAL_ARB_ENABLE_BIT 0
-
-
-/*------------ WDT */
-
-#define DANUBE_WDT_BASE_ADDR (KSEG1 + 0x1F880000)
-
-#define DANUBE_BIU_WDT_CR ((u32*)(DANUBE_WDT_BASE_ADDR + 0x03F0))
-#define DANUBE_BIU_WDT_SR ((u32*)(DANUBE_WDT_BASE_ADDR + 0x03F8))
-
-#define DANUBE_BIU_WDT_CR_GEN (1 << 31)
-#define DANUBE_BIU_WDT_CR_DSEN (1 << 30)
-#define DANUBE_BIU_WDT_CR_LPEN (1 << 29)
-
-#define DANUBE_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1))
-#define DANUBE_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1))
-#define DANUBE_BIU_WDT_CR_PWL_SET(value) ((((1 << 2) - 1) & (value)) << 26)
-#define DANUBE_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16)
-#define DANUBE_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-
-/*------------ LED */
-
-#define DANUBE_LED_BASE_ADDR (KSEG1 + 0x1E100BB0)
-#define DANUBE_LED_CON0 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0000))
-#define DANUBE_LED_CON1 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0004))
-#define DANUBE_LED_CPU0 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0008))
-#define DANUBE_LED_CPU1 ((u32*)(DANUBE_LED_BASE_ADDR + 0x000C))
-#define DANUBE_LED_AR ((u32*)(DANUBE_LED_BASE_ADDR + 0x0010))
-
-#define LED_CON0_SWU (1 << 31)
-#define LED_CON0_AD1 (1 << 25)
-#define LED_CON0_AD0 (1 << 24)
-
-#define DANUBE_LED_2HZ (0)
-#define DANUBE_LED_4HZ (1 << 23)
-#define DANUBE_LED_8HZ (2 << 23)
-#define DANUBE_LED_10HZ (3 << 23)
-#define DANUBE_LED_MASK (0xf << 23)
-
-#define DANUBE_LED_UPD_SRC_FPI (1 << 31)
-#define DANUBE_LED_UPD_MASK (3 << 30)
-#define DANUBE_LED_ADSL_SRC (3 << 24)
-
-#define DANUBE_LED_GROUP0 (1 << 0)
-#define DANUBE_LED_GROUP1 (1 << 1)
-#define DANUBE_LED_GROUP2 (1 << 2)
-
-#define DANUBE_LED_RISING 0
-#define DANUBE_LED_FALLING (1 << 26)
-#define DANUBE_LED_EDGE_MASK (1 << 26)
-
-
-/*------------ GPIO */
-
-#define DANUBE_GPIO_BASE_ADDR (0xBE100B00)
-
-#define DANUBE_GPIO_P0_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0010))
-#define DANUBE_GPIO_P1_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0040))
-#define DANUBE_GPIO_P0_IN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0014))
-#define DANUBE_GPIO_P1_IN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0044))
-#define DANUBE_GPIO_P0_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0018))
-#define DANUBE_GPIO_P1_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0048))
-#define DANUBE_GPIO_P0_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x001C))
-#define DANUBE_GPIO_P1_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x004C))
-#define DANUBE_GPIO_P0_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0020))
-#define DANUBE_GPIO_P1_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0050))
-#define DANUBE_GPIO_P0_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0024))
-#define DANUBE_GPIO_P1_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0054))
-#define DANUBE_GPIO_P0_STOFF ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0028))
-#define DANUBE_GPIO_P1_STOFF ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0058))
-#define DANUBE_GPIO_P0_PUDSEL ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x002C))
-#define DANUBE_GPIO_P1_PUDSEL ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x005C))
-#define DANUBE_GPIO_P0_PUDEN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0030))
-#define DANUBE_GPIO_P1_PUDEN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0060))
-
-
-/*------------ SSC */
-
-#define DANUBE_SSC1_BASE_ADDR (KSEG1 + 0x1e100800)
-
-
-
-
-
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_dma.h b/target/linux/danube/files/include/asm-mips/danube/danube_dma.h
deleted file mode 100644
index 219fd490ed..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_dma.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _DANUBE_DMA_H__
-#define _DANUBE_DMA_H__
-
-#define RCV_INT 1
-#define TX_BUF_FULL_INT 2
-#define TRANSMIT_CPT_INT 4
-#define DANUBE_DMA_CH_ON 1
-#define DANUBE_DMA_CH_OFF 0
-#define DANUBE_DMA_CH_DEFAULT_WEIGHT 100
-
-enum attr_t{
- TX = 0,
- RX = 1,
- RESERVED = 2,
- DEFAULT = 3,
-};
-
-#define DMA_OWN 1
-#define CPU_OWN 0
-#define DMA_MAJOR 250
-
-#define DMA_DESC_OWN_CPU 0x0
-#define DMA_DESC_OWN_DMA 0x80000000
-#define DMA_DESC_CPT_SET 0x40000000
-#define DMA_DESC_SOP_SET 0x20000000
-#define DMA_DESC_EOP_SET 0x10000000
-
-#define MISCFG_MASK 0x40
-#define RDERR_MASK 0x20
-#define CHOFF_MASK 0x10
-#define DESCPT_MASK 0x8
-#define DUR_MASK 0x4
-#define EOP_MASK 0x2
-
-#define DMA_DROP_MASK (1<<31)
-
-#define DANUBE_DMA_RX -1
-#define DANUBE_DMA_TX 1
-
-typedef struct dma_chan_map {
- char dev_name[15];
- enum attr_t dir;
- int pri;
- int irq;
- int rel_chan_no;
-} _dma_chan_map;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-typedef struct rx_desc{
- u32 data_length:16;
- volatile u32 reserved:7;
- volatile u32 byte_offset:2;
- volatile u32 Burst_length_offset:3;
- volatile u32 EoP:1;
- volatile u32 Res:1;
- volatile u32 C:1;
- volatile u32 OWN:1;
- volatile u32 Data_Pointer;
- /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/
-}_rx_desc;
-
-typedef struct tx_desc{
- volatile u32 data_length:16;
- volatile u32 reserved1:7;
- volatile u32 byte_offset:5;
- volatile u32 EoP:1;
- volatile u32 SoP:1;
- volatile u32 C:1;
- volatile u32 OWN:1;
- volatile u32 Data_Pointer;//fix me:should be 28 bits here
-}_tx_desc;
-#else //BIG
-typedef struct rx_desc{
- union
- {
- struct
- {
- volatile u32 OWN:1;
- volatile u32 C:1;
- volatile u32 SoP:1;
- volatile u32 EoP:1;
- volatile u32 Burst_length_offset:3;
- volatile u32 byte_offset:2;
- volatile u32 reserve:7;
- volatile u32 data_length:16;
- }field;
- volatile u32 word;
- }status;
- volatile u32 Data_Pointer;
-}_rx_desc;
-
-typedef struct tx_desc{
- union
- {
- struct
- {
- volatile u32 OWN:1;
- volatile u32 C:1;
- volatile u32 SoP:1;
- volatile u32 EoP:1;
- volatile u32 byte_offset:5;
- volatile u32 reserved:7;
- volatile u32 data_length:16;
- }field;
- volatile u32 word;
- }status;
- volatile u32 Data_Pointer;
-}_tx_desc;
-#endif //ENDIAN
-
-typedef struct dma_channel_info{
- /*relative channel number*/
- int rel_chan_no;
- /*class for this channel for QoS*/
- int pri;
- /*specify byte_offset*/
- int byte_offset;
- /*direction*/
- int dir;
- /*irq number*/
- int irq;
- /*descriptor parameter*/
- int desc_base;
- int desc_len;
- int curr_desc;
- int prev_desc;/*only used if it is a tx channel*/
- /*weight setting for WFQ algorithm*/
- int weight;
- int default_weight;
- int packet_size;
- int burst_len;
- /*on or off of this channel*/
- int control;
- /**optional information for the upper layer devices*/
-#if defined(CONFIG_DANUBE_ETHERNET_D2) || defined(CONFIG_DANUBE_PPA)
- void* opt[64];
-#else
- void* opt[25];
-#endif
- /*Pointer to the peripheral device who is using this channel*/
- void* dma_dev;
- /*channel operations*/
- void (*open)(struct dma_channel_info* pCh);
- void (*close)(struct dma_channel_info* pCh);
- void (*reset)(struct dma_channel_info* pCh);
- void (*enable_irq)(struct dma_channel_info* pCh);
- void (*disable_irq)(struct dma_channel_info* pCh);
-}_dma_channel_info;
-
-typedef struct dma_device_info{
- /*device name of this peripheral*/
- char device_name[15];
- int reserved;
- int tx_burst_len;
- int rx_burst_len;
- int default_weight;
- int current_tx_chan;
- int current_rx_chan;
- int num_tx_chan;
- int num_rx_chan;
- int max_rx_chan_num;
- int max_tx_chan_num;
- _dma_channel_info* tx_chan[20];
- _dma_channel_info* rx_chan[20];
- /*functions, optional*/
- u8* (*buffer_alloc)(int len,int* offset, void** opt);
- void (*buffer_free)(u8* dataptr, void* opt);
- int (*intr_handler)(struct dma_device_info* info, int status);
- void * priv; /* used by peripheral driver only */
-}_dma_device_info;
-
-_dma_device_info* dma_device_reserve(char* dev_name);
-
-void dma_device_release(_dma_device_info* dev);
-
-void dma_device_register(_dma_device_info* info);
-
-void dma_device_unregister(_dma_device_info* info);
-
-int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt);
-
-int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt);
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_gpio.h b/target/linux/danube/files/include/asm-mips/danube/danube_gpio.h
deleted file mode 100644
index 2ea8d9cf7d..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_gpio.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _DANUBE_GPIO_H__
-#define _DANUBE_GPIO_H__
-
-extern int danube_port_reserve_pin (unsigned int port, unsigned int pin);
-extern int danube_port_free_pin (unsigned int port, unsigned int pin);
-extern int danube_port_set_open_drain (unsigned int port, unsigned int pin);
-extern int danube_port_clear_open_drain (unsigned int port, unsigned int pin);
-extern int danube_port_set_pudsel (unsigned int port, unsigned int pin);
-extern int danube_port_clear_pudsel (unsigned int port, unsigned int pin);
-extern int danube_port_set_puden (unsigned int port, unsigned int pin);
-extern int danube_port_clear_puden (unsigned int port, unsigned int pin);
-extern int danube_port_set_stoff (unsigned int port, unsigned int pin);
-extern int danube_port_clear_stoff (unsigned int port, unsigned int pin);
-extern int danube_port_set_dir_out (unsigned int port, unsigned int pin);
-extern int danube_port_set_dir_in (unsigned int port, unsigned int pin);
-extern int danube_port_set_output (unsigned int port, unsigned int pin);
-extern int danube_port_clear_output (unsigned int port, unsigned int pin);
-extern int danube_port_get_input (unsigned int port, unsigned int pin);
-extern int danube_port_set_altsel0 (unsigned int port, unsigned int pin);
-extern int danube_port_clear_altsel0 (unsigned int port, unsigned int pin);
-extern int danube_port_set_altsel1 (unsigned int port, unsigned int pin);
-extern int danube_port_clear_altsel1 (unsigned int port, unsigned int pin);
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h b/target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h
deleted file mode 100644
index 6d14f5d060..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_ioctl.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _DANUBE_IOCTL_H__
-#define _DANUBE_IOCTL_H__
-
-/*------------ LED */
-
-struct danube_port_ioctl_parm
-{
- int port;
- int pin;
- int value;
-};
-
-#define DANUBE_PORT_IOC_MAGIC 0xbf
-#define DANUBE_PORT_IOCOD _IOW(DANUBE_PORT_IOC_MAGIC,0,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCPUDSEL _IOW(DANUBE_PORT_IOC_MAGIC,1,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCPUDEN _IOW(DANUBE_PORT_IOC_MAGIC,2,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCSTOFF _IOW(DANUBE_PORT_IOC_MAGIC,3,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCDIR _IOW(DANUBE_PORT_IOC_MAGIC,4,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCOUTPUT _IOW(DANUBE_PORT_IOC_MAGIC,5,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCINPUT _IOWR(DANUBE_PORT_IOC_MAGIC,6,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCALTSEL0 _IOW(DANUBE_PORT_IOC_MAGIC,7,struct danube_port_ioctl_parm)
-#define DANUBE_PORT_IOCALTSEL1 _IOW(DANUBE_PORT_IOC_MAGIC,8,struct danube_port_ioctl_parm)
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_irq.h b/target/linux/danube/files/include/asm-mips/danube/danube_irq.h
deleted file mode 100644
index 45796831fe..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_irq.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _DANUBE_IRQ__
-#define _DANUBE_IRQ__
-
-#define INT_NUM_IRQ0 8
-#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
-#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
-#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
-#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
-#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
-#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
-
-#define DANUBEASC1_TIR (INT_NUM_IM3_IRL0 + 7)
-#define DANUBEASC1_RIR (INT_NUM_IM3_IRL0 + 9)
-#define DANUBEASC1_EIR (INT_NUM_IM3_IRL0 + 10)
-
-#define DANUBE_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
-#define DANUBE_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
-#define DANUBE_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
-
-#define DANUBE_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
-
-#define MIPS_CPU_TIMER_IRQ 7
-
-#define DANUBE_DMA_CH0_INT (INT_NUM_IM2_IRL0)
-#define DANUBE_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
-#define DANUBE_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
-#define DANUBE_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
-#define DANUBE_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
-#define DANUBE_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
-#define DANUBE_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
-#define DANUBE_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
-#define DANUBE_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
-#define DANUBE_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
-#define DANUBE_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
-#define DANUBE_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
-#define DANUBE_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
-#define DANUBE_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
-#define DANUBE_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
-#define DANUBE_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
-#define DANUBE_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
-#define DANUBE_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
-#define DANUBE_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
-#define DANUBE_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
-
-extern void mask_and_ack_danube_irq (unsigned int irq_nr);
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_mii0.h b/target/linux/danube/files/include/asm-mips/danube/danube_mii0.h
deleted file mode 100644
index 6f96ef6b79..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_mii0.h
+++ /dev/null
@@ -1,254 +0,0 @@
-#ifndef DANUBE_SW_H
-#define DANUBE_SW_H
-
-
-
-/******************************************************************************
-**
-** FILE NAME : danube_sw.h
-** PROJECT : Danube
-** MODULES : ETH Interface (MII0)
-**
-** DATE : 11 AUG 2005
-** AUTHOR : Wu Qi Ming
-** DESCRIPTION : ETH Interface (MII0) Driver Header File
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 11 AUG 2005 Wu Qi Ming Initiate Version
-** 23 OCT 2006 Xu Liang Add GPL header.
-*******************************************************************************/
-
-
-#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE
-#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1
-#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2
-#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3
-#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4
-#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5
-#define SET_ETH_REG SIOCDEVPRIVATE+6
-#define VLAN_TOOLS SIOCDEVPRIVATE+7
-#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8
-#define SET_VLAN_COS SIOCDEVPRIVATE+9
-#define SET_DSCP_COS SIOCDEVPRIVATE+10
-#define ENABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+11
-#define DISABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+12
-#define VLAN_CLASS_FIRST SIOCDEVPRIVATE+13
-#define VLAN_CLASS_SECOND SIOCDEVPRIVATE+14
-#define ENABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+15
-#define DISABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+16
-#define PASS_UNICAST_PACKETS SIOCDEVPRIVATE+17
-#define FILTER_UNICAST_PACKETS SIOCDEVPRIVATE+18
-#define KEEP_BROADCAST_PACKETS SIOCDEVPRIVATE+19
-#define DROP_BROADCAST_PACKETS SIOCDEVPRIVATE+20
-#define KEEP_MULTICAST_PACKETS SIOCDEVPRIVATE+21
-#define DROP_MULTICAST_PACKETS SIOCDEVPRIVATE+22
-
-
-/*===mac table commands==*/
-#define RESET_MAC_TABLE 0
-#define READ_MAC_ENTRY 1
-#define WRITE_MAC_ENTRY 2
-#define ADD_MAC_ENTRY 3
-
-/*====vlan commands===*/
-
-#define CHANGE_VLAN_CTRL 0
-#define READ_VLAN_ENTRY 1
-#define UPDATE_VLAN_ENTRY 2
-#define CLEAR_VLAN_ENTRY 3
-#define RESET_VLAN_TABLE 4
-#define ADD_VLAN_ENTRY 5
-
-/*
-** MDIO constants.
-*/
-
-#define MDIO_BASE_STATUS_REG 0x1
-#define MDIO_BASE_CONTROL_REG 0x0
-#define MDIO_PHY_ID_HIGH_REG 0x2
-#define MDIO_PHY_ID_LOW_REG 0x3
-#define MDIO_BC_NEGOTIATE 0x0200
-#define MDIO_BC_FULL_DUPLEX_MASK 0x0100
-#define MDIO_BC_AUTO_NEG_MASK 0x1000
-#define MDIO_BC_SPEED_SELECT_MASK 0x2000
-#define MDIO_STATUS_100_FD 0x4000
-#define MDIO_STATUS_100_HD 0x2000
-#define MDIO_STATUS_10_FD 0x1000
-#define MDIO_STATUS_10_HD 0x0800
-#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800
-#define MDIO_ADVERTISMENT_REG 0x4
-#define MDIO_ADVERT_100_FD 0x100
-#define MDIO_ADVERT_100_HD 0x080
-#define MDIO_ADVERT_10_FD 0x040
-#define MDIO_ADVERT_10_HD 0x020
-#define MDIO_LINK_UP_MASK 0x4
-#define MDIO_START 0x1
-#define MDIO_READ 0x2
-#define MDIO_WRITE 0x1
-#define MDIO_PREAMBLE 0xfffffffful
-
-#define PHY_RESET 0x8000
-#define AUTO_NEGOTIATION_ENABLE 0X1000
-#define AUTO_NEGOTIATION_COMPLETE 0x20
-#define RESTART_AUTO_NEGOTIATION 0X200
-
-
-/*ETOP_MDIO_CFG MASKS*/
-#define SMRST_MASK 0X2000
-#define PHYA1_MASK 0X1F00
-#define PHYA0_MASK 0XF8
-#define UMM1_MASK 0X4
-#define UMM0_MASK 0X2
-
-/*ETOP_MDIO_ACCESS MASKS*/
-#define MDIO_RA_MASK 0X80000000
-#define MDIO_RW_MASK 0X40000000
-
-
-/*ENET_MAC_CFG MASKS*/
-#define BP_MASK 1<<12
-#define CGEN_MASK 1<<11
-#define IFG_MASK 0x3F<<5
-#define IPAUS_MASK 1<<4
-#define EPAUS_MASK 1<<3
-#define DUPLEX_MASK 1<<2
-#define SPEED_MASK 0x2
-#define LINK_MASK 1
-
-/*ENETS_CoS_CFG MASKS*/
-#define VLAN_MASK 2
-#define DSCP_MASK 1
-
-/*ENET_CFG MASKS*/
-#define VL2_MASK 1<<29
-#define FTUC_MASK 1<<25
-#define DPBC_MASK 1<<24
-#define DPMC_MASK 1<<23
-
-#define PHY0_ADDR 0
-#define PHY1_ADDR 1
-#define P1M 0
-
-#define DANUBE_SW_REG32(reg_num) *((volatile u32*)(reg_num))
-
-#define OK 0;
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-typedef struct mac_table_entry{
- u64 mac_address:48;
- u64 p0:1;
- u64 p1:1;
- u64 p2:1;
- u64 cr:1;
- u64 ma_st:3;
- u64 res:9;
-}_mac_table_entry;
-
-typedef struct IFX_Switch_VLanTableEntry{
- u32 vlan_id:12;
- u32 mp0:1;
- u32 mp1:1;
- u32 mp2:1;
- u32 v:1;
- u32 res:16;
-}_IFX_Switch_VLanTableEntry;
-
-typedef struct mac_table_req{
- int cmd;
- int index;
- u32 data;
- u64 entry_value;
-}_mac_table_req;
-
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-typedef struct mac_table_entry{
- u64 mac_address:48;
- u64 p0:1;
- u64 p1:1;
- u64 p2:1;
- u64 cr:1;
- u64 ma_st:3;
- u64 res:9;
-}_mac_table_entry;
-
-typedef struct IFX_Switch_VLanTableEntry{
- u32 vlan_id:12;
- u32 mp0:1;
- u32 mp1:1;
- u32 mp2:1;
- u32 v:1;
- u32 res:16;
-}_IFX_Switch_VLanTableEntry;
-
-
-typedef struct mac_table_req{
- int cmd;
- int index;
- u32 data;
- u64 entry_value;
-}_mac_table_req;
-
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-typedef struct vlan_cos_req{
- int pri;
- int cos_value;
-}_vlan_cos_req;
-
-typedef struct dscp_cos_req{
- int dscp;
- int cos_value;
-}_dscp_cos_req;
-
-
-typedef struct vlan_req{
- int cmd;
- int index;
- u32 data;
- u32 entry_value;
-}_vlan_req;
-
-typedef struct data_req{
- int index;
- u32 value;
-}_data_req;
-
-enum duplex
-{
- half,
- full,
- autoneg
-};
-
-struct switch_priv {
- struct net_device_stats stats;
- int rx_packetlen;
- u8 *rx_packetdata;
- int rx_status;
- int tx_packetlen;
-#ifdef CONFIG_NET_HW_FLOWCONTROL
- int fc_bit;
-#endif //CONFIG_NET_HW_FLOWCONTROL
- u8 *tx_packetdata;
- int tx_status;
- struct dma_device_info *dma_device;
- struct sk_buff *skb;
- spinlock_t lock;
- int mdio_phy_addr;
- int current_speed;
- int current_speed_selection;
- int rx_queue_len;
- int full_duplex;
- enum duplex current_duplex;
-};
-
-#endif //DANUBE_SW_H
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_orig.h b/target/linux/danube/files/include/asm-mips/danube/danube_orig.h
deleted file mode 100644
index 4197933f85..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_orig.h
+++ /dev/null
@@ -1,2021 +0,0 @@
-#ifndef DANUBE_H
-#define DANUBE_H
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-/***********************************************************************/
-/* Module : WDT register address and bits */
-/***********************************************************************/
-
-#define BOARD_SYSTEM_TYPE "DANUBE"
-
-#define DANUBE_BIU_WDT (KSEG1+0x1F880000)
-
-/***Watchdog Timer Control Register ***/
-#define DANUBE_BIU_WDT_CR ((volatile u32*)(DANUBE_BIU_WDT + 0x03F0))
-#define DANUBE_BIU_WDT_CR_GEN (1 << 31)
-#define DANUBE_BIU_WDT_CR_DSEN (1 << 30)
-#define DANUBE_BIU_WDT_CR_LPEN (1 << 29)
-#define DANUBE_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1))
-#define DANUBE_BIU_WDT_CR_PWL_SET(value) (((( 1 << 2) - 1) & (value)) << 26)
-#define DANUBE_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1))
-#define DANUBE_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_BIU_WDT_CR_PW_GET(value) (((value) >> 16) & ((1 << 8) - 1))
-#define DANUBE_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16)
-#define DANUBE_BIU_WDT_CR_RELOAD_GET(value) (((value) >> 0) & ((1 << 16) - 1))
-#define DANUBE_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***Watchdog Timer Status Register***/
-#define DANUBE_BIU_WDT_SR ((volatile u32*)(DANUBE_BIU_WDT + 0x03F8))
-#define DANUBE_BIU_WDT_SR_EN (1 << 31)
-#define DANUBE_BIU_WDT_SR_AE (1 << 30)
-#define DANUBE_BIU_WDT_SR_PRW (1 << 29)
-#define DANUBE_BIU_WDT_SR_EXP (1 << 28)
-#define DANUBE_BIU_WDT_SR_PWD (1 << 27)
-#define DANUBE_BIU_WDT_SR_DS (1 << 26)
-#define DANUBE_BIU_WDT_SR_VALUE_GET(value) (((value) >> 0) & ((1 << 16) - 1))
-#define DANUBE_BIU_WDT_SR_VALUE_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : PMU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_PMU (KSEG1+0x1F102000)
-
-/* PMU Power down Control Register */
-#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C))
-#define DANUBE_PMU_PWDCR_GPT (1 << 12)
-#define DANUBE_PMU_PWDCR_FPI (1 << 14)
-
-
-/* PMU Status Register */
-#define DANUBE_PMU_SR ((volatile u32*)(DANUBE_PMU+0x0020))
-
-#define DANUBE_PMU_DMA_SHIFT 5
-#define DANUBE_PMU_PPE_SHIFT 13
-#define DANUBE_PMU_SDIO_SHIFT 16
-#define DANUBE_PMU_ETOP_SHIFT 22
-#define DANUBE_PMU_ENET0_SHIFT 24
-#define DANUBE_PMU_ENET1_SHIFT 25
-
-/***********************************************************************/
-/* Module : RCU register address and bits */
-/***********************************************************************/
-#define DANUBE_RCU_BASE_ADDR (0xBF203000)
-
-#define DANUBE_RCU_REQ (0x0010 + DANUBE_RCU_BASE_ADDR) /* will remove this, pls use DANUBE_RCU_RST_REQ */
-
-#define DANUBE_RCU_RST_REQ ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x0010))
-#define DANUBE_RCU_RST_STAT ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x0014))
-#define DANUBE_RST_ALL (0x40000000)
-
-/***Reset Request Register***/
-#define DANUBE_RCU_RST_REQ_CPU0 (1 << 31)
-#define DANUBE_RCU_RST_REQ_CPU1 (1 << 3)
-#define DANUBE_RCU_RST_REQ_CPUSUB (1 << 29)
-#define DANUBE_RCU_RST_REQ_HRST (1 << 28)
-#define DANUBE_RCU_RST_REQ_WDT0 (1 << 27)
-#define DANUBE_RCU_RST_REQ_WDT1 (1 << 26)
-#define DANUBE_RCU_RST_REQ_CFG_GET(value) (((value) >> 23) & ((1 << 3) - 1))
-#define DANUBE_RCU_RST_REQ_CFG_SET(value) (((( 1 << 3) - 1) & (value)) << 23)
-#define DANUBE_RCU_RST_REQ_SWTBOOT (1 << 22)
-#define DANUBE_RCU_RST_REQ_DMA (1 << 21)
-#define DANUBE_RCU_RST_REQ_ARC_JTAG (1 << 20)
-#define DANUBE_RCU_RST_REQ_ETHPHY0 (1 << 19)
-#define DANUBE_RCU_RST_REQ_CPU0_BR (1 << 18)
-
-#define DANBUE_RCU_RST_REQ_AFE (1 << 11)
-#define DANBUE_RCU_RST_REQ_DFE (1 << 7)
-
-/* CPU0, CPU1, CPUSUB, HRST, WDT0, WDT1, DMA, ETHPHY1, ETHPHY0 */
-#define DANUBE_RCU_RST_REQ_ALL DANUBE_RST_ALL
-
-#define DANUBE_RCU_STAT (0x0014 + DANUBE_RCU_BASE_ADDR)
-#define DANUBE_RCU_RST_SR ( (volatile u32 *)(DANUBE_RCU_STAT)) /* will remove this, pls use DANUBE_RCU_RST_STAT */
-
-/*#define DANUBE_RCU_MON (0x0030 + DANUBE_RCU_BASE_ADDR) */
-
-/***********************************************************************/
-/* Module : BCU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_BCU_BASE_ADDR (KSEG1+0x1E100000)
-
-/***BCU Control Register (0010H)***/
-#define DANUBE_BCU_CON ((volatile u32*)(0x0010 + DANUBE_BCU_BASE_ADDR))
-#define DANUBE_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define DANUBE_BCU_BCU_CON_SPE (1 << 19)
-#define DANUBE_BCU_BCU_CON_PSE (1 << 18)
-#define DANUBE_BCU_BCU_CON_DBG (1 << 16)
-#define DANUBE_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***BCU Error Control Capture Register (0020H)***/
-#define DANUBE_BCU_ECON ((volatile u32*)(0x0020 + DANUBE_BCU_BASE_ADDR))
-#define DANUBE_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24)
-#define DANUBE_BCU_BCU_ECON_RDN (1 << 23)
-#define DANUBE_BCU_BCU_ECON_WRN (1 << 22)
-#define DANUBE_BCU_BCU_ECON_SVM (1 << 21)
-#define DANUBE_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19)
-#define DANUBE_BCU_BCU_ECON_ABT (1 << 18)
-#define DANUBE_BCU_BCU_ECON_RDY (1 << 17)
-#define DANUBE_BCU_BCU_ECON_TOUT (1 << 16)
-#define DANUBE_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0)
-#define DANUBE_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28)
-
-/***BCU Error Address Capture Register (0024 H)***/
-#define DANUBE_BCU_EADD ((volatile u32*)(0x0024 + DANUBE_BCU_BASE_ADDR))
-
-/***BCU Error Data Capture Register (0028H)***/
-#define DANUBE_BCU_EDAT ((volatile u32*)(0x0028 + DANUBE_BCU_BASE_ADDR))
-#define DANUBE_BCU_IRNEN ((volatile u32*)(0x00F4 + DANUBE_BCU_BASE_ADDR))
-#define DANUBE_BCU_IRNICR ((volatile u32*)(0x00F8 + DANUBE_BCU_BASE_ADDR))
-#define DANUBE_BCU_IRNCR ((volatile u32*)(0x00FC + DANUBE_BCU_BASE_ADDR))
-
-/***********************************************************************/
-/* Module : MBC register address and bits */
-/***********************************************************************/
-
-#define DANUBE_MBC (0xBF103000)
-/***********************************************************************/
-
-/***Mailbox CPU Configuration Register***/
-#define DANUBE_MBC_MBC_CFG ((volatile u32*)(DANUBE_MBC+ 0x0080))
-#define DANUBE_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define DANUBE_MBC_MBC_CFG_RES (1 << 5)
-#define DANUBE_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1)
-#define DANUBE_MBC_MBC_CFG_SIZE (1 << 0)
-
-/***Mailbox CPU Interrupt Status Register***/
-#define DANUBE_MBC_MBC_ISR ((volatile u32*)(DANUBE_MBC+ 0x0084))
-#define DANUBE_MBC_MBC_ISR_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_ISR_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_ISR_B1E (1 << 29)
-#define DANUBE_MBC_MBC_ISR_B0E (1 << 28)
-#define DANUBE_MBC_MBC_ISR_WDT (1 << 27)
-#define DANUBE_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask Register***/
-#define DANUBE_MBC_MBC_MSK ((volatile u32*)(DANUBE_MBC+ 0x0088))
-#define DANUBE_MBC_MBC_MSK_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_MSK_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_MSK_B1E (1 << 29)
-#define DANUBE_MBC_MBC_MSK_B0E (1 << 28)
-#define DANUBE_MBC_MBC_MSK_WDT (1 << 27)
-#define DANUBE_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask 01 Register***/
-#define DANUBE_MBC_MBC_MSK01 ((volatile u32*)(DANUBE_MBC+ 0x008C))
-#define DANUBE_MBC_MBC_MSK01_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_MSK01_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_MSK01_B1E (1 << 29)
-#define DANUBE_MBC_MBC_MSK01_B0E (1 << 28)
-#define DANUBE_MBC_MBC_MSK01_WDT (1 << 27)
-#define DANUBE_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask 10 Register***/
-#define DANUBE_MBC_MBC_MSK10 ((volatile u32*)(DANUBE_MBC+ 0x0090))
-#define DANUBE_MBC_MBC_MSK10_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_MSK10_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_MSK10_B1E (1 << 29)
-#define DANUBE_MBC_MBC_MSK10_B0E (1 << 28)
-#define DANUBE_MBC_MBC_MSK10_WDT (1 << 27)
-#define DANUBE_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Short Command Register***/
-#define DANUBE_MBC_MBC_CMD ((volatile u32*)(DANUBE_MBC+ 0x0094))
-#define DANUBE_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***Mailbox CPU Input Data of Buffer 0***/
-#define DANUBE_MBC_MBC_ID0 ((volatile u32*)(DANUBE_MBC+ 0x0000))
-#define DANUBE_MBC_MBC_ID0_INDATA
-
-/***Mailbox CPU Input Data of Buffer 1***/
-#define DANUBE_MBC_MBC_ID1 ((volatile u32*)(DANUBE_MBC+ 0x0020))
-#define DANUBE_MBC_MBC_ID1_INDATA
-
-/***Mailbox CPU Output Data of Buffer 2***/
-#define DANUBE_MBC_MBC_OD2 ((volatile u32*)(DANUBE_MBC+ 0x0040))
-#define DANUBE_MBC_MBC_OD2_OUTDATA
-
-/***Mailbox CPU Output Data of Buffer 3***/
-#define DANUBE_MBC_MBC_OD3 ((volatile u32*)(DANUBE_MBC+ 0x0060))
-#define DANUBE_MBC_MBC_OD3_OUTDATA
-
-/***Mailbox CPU Control Register of Buffer 0***/
-#define DANUBE_MBC_MBC_CR0 ((volatile u32*)(DANUBE_MBC+ 0x0004))
-#define DANUBE_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 1***/
-#define DANUBE_MBC_MBC_CR1 ((volatile u32*)(DANUBE_MBC+ 0x0024))
-#define DANUBE_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 2***/
-#define DANUBE_MBC_MBC_CR2 ((volatile u32*)(DANUBE_MBC+ 0x0044))
-#define DANUBE_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 3***/
-#define DANUBE_MBC_MBC_CR3 ((volatile u32*)(DANUBE_MBC+ 0x0064))
-#define DANUBE_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Free Space of Buffer 0***/
-#define DANUBE_MBC_MBC_FS0 ((volatile u32*)(DANUBE_MBC+ 0x0008))
-#define DANUBE_MBC_MBC_FS0_FS
-
-/***Mailbox CPU Free Space of Buffer 1***/
-#define DANUBE_MBC_MBC_FS1 ((volatile u32*)(DANUBE_MBC+ 0x0028))
-#define DANUBE_MBC_MBC_FS1_FS
-
-/***Mailbox CPU Free Space of Buffer 2***/
-#define DANUBE_MBC_MBC_FS2 ((volatile u32*)(DANUBE_MBC+ 0x0048))
-#define DANUBE_MBC_MBC_FS2_FS
-
-/***Mailbox CPU Free Space of Buffer 3***/
-#define DANUBE_MBC_MBC_FS3 ((volatile u32*)(DANUBE_MBC+ 0x0068))
-#define DANUBE_MBC_MBC_FS3_FS
-
-/***Mailbox CPU Data Available in Buffer 0***/
-#define DANUBE_MBC_MBC_DA0 ((volatile u32*)(DANUBE_MBC+ 0x000C))
-#define DANUBE_MBC_MBC_DA0_DA
-
-/***Mailbox CPU Data Available in Buffer 1***/
-#define DANUBE_MBC_MBC_DA1 ((volatile u32*)(DANUBE_MBC+ 0x002C))
-#define DANUBE_MBC_MBC_DA1_DA
-
-/***Mailbox CPU Data Available in Buffer 2***/
-#define DANUBE_MBC_MBC_DA2 ((volatile u32*)(DANUBE_MBC+ 0x004C))
-#define DANUBE_MBC_MBC_DA2_DA
-
-/***Mailbox CPU Data Available in Buffer 3***/
-#define DANUBE_MBC_MBC_DA3 ((volatile u32*)(DANUBE_MBC+ 0x006C))
-#define DANUBE_MBC_MBC_DA3_DA
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_IABS0 ((volatile u32*)(DANUBE_MBC+ 0x0010))
-#define DANUBE_MBC_MBC_IABS0_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_IABS1 ((volatile u32*)(DANUBE_MBC+ 0x0030))
-#define DANUBE_MBC_MBC_IABS1_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_IABS2 ((volatile u32*)(DANUBE_MBC+ 0x0050))
-#define DANUBE_MBC_MBC_IABS2_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_IABS3 ((volatile u32*)(DANUBE_MBC+ 0x0070))
-#define DANUBE_MBC_MBC_IABS3_IABS
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_ITMP0 ((volatile u32*)(DANUBE_MBC+ 0x0014))
-#define DANUBE_MBC_MBC_ITMP0_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_ITMP1 ((volatile u32*)(DANUBE_MBC+ 0x0034))
-#define DANUBE_MBC_MBC_ITMP1_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_ITMP2 ((volatile u32*)(DANUBE_MBC+ 0x0054))
-#define DANUBE_MBC_MBC_ITMP2_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_ITMP3 ((volatile u32*)(DANUBE_MBC+ 0x0074))
-#define DANUBE_MBC_MBC_ITMP3_ITMP
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_OABS0 ((volatile u32*)(DANUBE_MBC+ 0x0018))
-#define DANUBE_MBC_MBC_OABS0_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_OABS1 ((volatile u32*)(DANUBE_MBC+ 0x0038))
-#define DANUBE_MBC_MBC_OABS1_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_OABS2 ((volatile u32*)(DANUBE_MBC+ 0x0058))
-#define DANUBE_MBC_MBC_OABS2_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_OABS3 ((volatile u32*)(DANUBE_MBC+ 0x0078))
-#define DANUBE_MBC_MBC_OABS3_OABS
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_OTMP0 ((volatile u32*)(DANUBE_MBC+ 0x001C))
-#define DANUBE_MBC_MBC_OTMP0_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_OTMP1 ((volatile u32*)(DANUBE_MBC+ 0x003C))
-#define DANUBE_MBC_MBC_OTMP1_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_OTMP2 ((volatile u32*)(DANUBE_MBC+ 0x005C))
-#define DANUBE_MBC_MBC_OTMP2_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_OTMP3 ((volatile u32*)(DANUBE_MBC+ 0x007C))
-#define DANUBE_MBC_MBC_OTMP3_OTMP
-
-/***DSP Control Register***/
-#define DANUBE_MBC_DCTRL ((volatile u32*)(DANUBE_MBC+ 0x00A0))
-#define DANUBE_MBC_DCTRL_BA (1 << 0)
-#define DANUBE_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1)
-#define DANUBE_MBC_DCTRL_IDL (1 << 4)
-#define DANUBE_MBC_DCTRL_RES (1 << 15)
-
-/***DSP Status Register***/
-#define DANUBE_MBC_DSTA ((volatile u32*)(DANUBE_MBC+ 0x00A4))
-#define DANUBE_MBC_DSTA_IDLE (1 << 0)
-#define DANUBE_MBC_DSTA_PD (1 << 1)
-
-/***DSP Test 1 Register***/
-#define DANUBE_MBC_DTST1 ((volatile u32*)(DANUBE_MBC+ 0x00A8))
-#define DANUBE_MBC_DTST1_ABORT (1 << 0)
-#define DANUBE_MBC_DTST1_HWF32 (1 << 1)
-#define DANUBE_MBC_DTST1_HWF4M (1 << 2)
-#define DANUBE_MBC_DTST1_HWFOP (1 << 3)
-
-/***********************************************************************/
-/* Module : MEI register address and bits */
-/***********************************************************************/
-#define MEI_SPACE_ACCESS 0xBE116000
-
-/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
-#define MEI_DATA_XFR ((volatile u32*)(0x0000 + MEI_SPACE_ACCESS))
-#define MEI_VERSION ((volatile u32*)(0x0004 + MEI_SPACE_ACCESS))
-#define MEI_ARC_GP_STAT ((volatile u32*)(0x0008 + MEI_SPACE_ACCESS))
-#define MEI_DATA_XFR_STAT ((volatile u32*)(0x000C + MEI_SPACE_ACCESS))
-#define MEI_XFR_ADDR ((volatile u32*)(0x0010 + MEI_SPACE_ACCESS))
-#define MEI_MAX_WAIT ((volatile u32*)(0x0014 + MEI_SPACE_ACCESS))
-#define MEI_TO_ARC_INT ((volatile u32*)(0x0018 + MEI_SPACE_ACCESS))
-#define ARC_TO_MEI_INT ((volatile u32*)(0x001C + MEI_SPACE_ACCESS))
-#define ARC_TO_MEI_INT_MASK ((volatile u32*)(0x0020 + MEI_SPACE_ACCESS))
-#define MEI_DEBUG_WAD ((volatile u32*)(0x0024 + MEI_SPACE_ACCESS))
-#define MEI_DEBUG_RAD ((volatile u32*)(0x0028 + MEI_SPACE_ACCESS))
-#define MEI_DEBUG_DATA ((volatile u32*)(0x002C + MEI_SPACE_ACCESS))
-#define MEI_DEBUG_DEC ((volatile u32*)(0x0030 + MEI_SPACE_ACCESS))
-#define MEI_CONFIG ((volatile u32*)(0x0034 + MEI_SPACE_ACCESS))
-#define MEI_RST_CONTROL ((volatile u32*)(0x0038 + MEI_SPACE_ACCESS))
-#define MEI_DBG_MASTER ((volatile u32*)(0x003C + MEI_SPACE_ACCESS))
-#define MEI_CLK_CONTROL ((volatile u32*)(0x0040 + MEI_SPACE_ACCESS))
-#define MEI_BIST_CONTROL ((volatile u32*)(0x0044 + MEI_SPACE_ACCESS))
-#define MEI_BIST_STAT ((volatile u32*)(0x0048 + MEI_SPACE_ACCESS))
-#define MEI_XDATA_BASE_SH ((volatile u32*)(0x004c + MEI_SPACE_ACCESS))
-#define MEI_XDATA_BASE ((volatile u32*)(0x0050 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR_BASE ((volatile u32*)(0x0054 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR0 ((volatile u32*)(0x0054 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR1 ((volatile u32*)(0x0058 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR2 ((volatile u32*)(0x005C + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR3 ((volatile u32*)(0x0060 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR4 ((volatile u32*)(0x0064 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR5 ((volatile u32*)(0x0068 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR6 ((volatile u32*)(0x006C + MEI_SPACE_ACCESS)))
-#define MEI_XMEM_BAR7 ((volatile u32*)(0x0070 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR8 ((volatile u32*)(0x0074 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR9 ((volatile u32*)(0x0078 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR10 ((volatile u32*)(0x007C + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR11 ((volatile u32*)(0x0080 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR12 ((volatile u32*)(0x0084 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR13 ((volatile u32*)(0x0088 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR14 ((volatile u32*)(0x008C + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR15 ((volatile u32*)(0x0090 + MEI_SPACE_ACCESS))
-#define MEI_XMEM_BAR16 ((volatile u32*)(0x0094 + MEI_SPACE_ACCESS))
-
-/***********************************************************************/
-/* Module : SSC1 register address and bits */
-/***********************************************************************/
-
-#define DANUBE_SSC1 (KSEG1+0x1e100800)
-/***********************************************************************/
-/***SSC Clock Control Register***/
-#define DANUBE_SSC_CLC (0x0000)
-#define DANUBE_SSC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_SSC_CLC_DISS (1 << 1)
-#define DANUBE_SSC_CLC_DISR (1 << 0)
-/***SSC Port Input Selection Register***/
-#define DANUBE_SSC_PISEL (0x0004)
-/***SSC Identification Register***/
-#define DANUBE_SSC_ID (0x0008)
-/***Control Register (Programming Mode)***/
-#define DANUBE_SSC_CON (0x0010)
-#define DANUBE_SSC_CON_RUEN (1 << 12)
-#define DANUBE_SSC_CON_TUEN (1 << 11)
-#define DANUBE_SSC_CON_AEN (1 << 10)
-#define DANUBE_SSC_CON_REN (1 << 9)
-#define DANUBE_SSC_CON_TEN (1 << 8)
-#define DANUBE_SSC_CON_LB (1 << 7)
-#define DANUBE_SSC_CON_PO (1 << 6)
-#define DANUBE_SSC_CON_PH (1 << 5)
-#define DANUBE_SSC_CON_HB (1 << 4)
-#define DANUBE_SSC_CON_BM(value) (((( 1 << 5) - 1) & (value)) << 16)
-#define DANUBE_SSC_CON_RX_OFF (1 << 1)
-#define DANUBE_SSC_CON_TX_OFF (1 << 0)
-/***SCC Status Register***/
-#define DANUBE_SSC_STATE (0x0014)
-#define DANUBE_SSC_STATE_EN (1 << 0)
-#define DANUBE_SSC_STATE_MS (1 << 1)
-#define DANUBE_SSC_STATE_BSY (1 << 13)
-#define DANUBE_SSC_STATE_RUE (1 << 12)
-#define DANUBE_SSC_STATE_TUE (1 << 11)
-#define DANUBE_SSC_STATE_AE (1 << 10)
-#define DANUBE_SSC_STATE_RE (1 << 9)
-#define DANUBE_SSC_STATE_TE (1 << 8)
-#define DANUBE_SSC_STATE_BC(value) (((( 1 << 5) - 1) & (value)) << 16)
-/***SSC Write Hardware Modified Control Register***/
-#define DANUBE_SSC_WHBSTATE ( 0x0018)
-#define DANUBE_SSC_WHBSTATE_SETBE (1 << 15)
-#define DANUBE_SSC_WHBSTATE_SETPE (1 << 14)
-#define DANUBE_SSC_WHBSTATE_SETRE (1 << 13)
-#define DANUBE_SSC_WHBSTATE_SETTE (1 << 12)
-#define DANUBE_SSC_WHBSTATE_CLRBE (1 << 11)
-#define DANUBE_SSC_WHBSTATE_CLRPE (1 << 10)
-#define DANUBE_SSC_WHBSTATE_CLRRE (1 << 9)
-#define DANUBE_SSC_WHBSTATE_CLRTE (1 << 8)
-/***SSC Transmitter Buffer Register***/
-#define DANUBE_SSC_TB (0x0020)
-#define DANUBE_SSC_TB_TB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
-/***SSC Receiver Buffer Register***/
-#define DANUBE_SSC_RB (0x0024)
-#define DANUBE_SSC_RB_RB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
-/***SSC Receive FIFO Control Register***/
-#define DANUBE_SSC_RXFCON (0x0030)
-#define DANUBE_SSC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_SSC_RXFCON_RXTMEN (1 << 2)
-#define DANUBE_SSC_RXFCON_RXFLU (1 << 1)
-#define DANUBE_SSC_RXFCON_RXFEN (1 << 0)
-/***SSC Transmit FIFO Control Register***/
-#define DANUBE_SSC_TXFCON ( 0x0034)
-#define DANUBE_SSC_TXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_SSC_TXFCON_TXTMEN (1 << 2)
-#define DANUBE_SSC_TXFCON_TXFLU (1 << 1)
-#define DANUBE_SSC_TXFCON_TXFEN (1 << 0)
-/***SSC FIFO Status Register***/
-#define DANUBE_SSC_FSTAT (0x0038)
-#define DANUBE_SSC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_SSC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
-/***SSC Baudrate Timer Reload Register***/
-#define DANUBE_SSC_BR (0x0040)
-#define DANUBE_SSC_BR_BR_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
-#define DANUBE_SSC_BRSTAT (0x0044)
-#define DANUBE_SSC_SFCON (0x0060)
-#define DANUBE_SSC_SFSTAT (0x0064)
-#define DANUBE_SSC_GPOCON (0x0070)
-#define DANUBE_SSC_GPOSTAT (0x0074)
-#define DANUBE_SSC_WHBGPOSTAT (0x0078)
-#define DANUBE_SSC_RXREQ (0x0080)
-#define DANUBE_SSC_RXCNT (0x0084)
-/*DMA Registers in Bus Clock Domain*/
-#define DANUBE_SSC_DMA_CON (0x00EC)
-/*interrupt Node Registers in Bus Clock Domain*/
-#define DANUBE_SSC_IRNEN (0x00F4)
-#define DANUBE_SSC_IRNCR (0x00F8)
-#define DANUBE_SSC_IRNICR (0x00FC)
-#define DANUBE_SSC_IRN_FIR 0x8
-#define DANUBE_SSC_IRN_EIR 0x4
-#define DANUBE_SSC_IRN_RIR 0x2
-#define DANUBE_SSC_IRN_TIR 0x1
-
-#define DANUBE_SSC1_CLC ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CLC))
-#define DANUBE_SSC1_ID ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_ID))
-#define DANUBE_SSC1_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CON))
-#define DANUBE_SSC1_STATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_STATE))
-#define DANUBE_SSC1_WHBSTATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBSTATE))
-#define DANUBE_SSC1_TB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TB))
-#define DANUBE_SSC1_RB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RB))
-#define DANUBE_SSC1_FSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_FSTAT))
-#define DANUBE_SSC1_PISEL ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_PISEL))
-#define DANUBE_SSC1_RXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXFCON))
-#define DANUBE_SSC1_TXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TXFCON))
-#define DANUBE_SSC1_BR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BR))
-#define DANUBE_SSC1_BRSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BRSTAT))
-#define DANUBE_SSC1_SFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFCON))
-#define DANUBE_SSC1_SFSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFSTAT))
-#define DANUBE_SSC1_GPOCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOCON))
-#define DANUBE_SSC1_GPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOSTAT))
-#define DANUBE_SSC1_WHBGPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBGPOSTAT))
-#define DANUBE_SSC1_RXREQ ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXREQ))
-#define DANUBE_SSC1_RXCNT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXCNT))
-#define DANUBE_SSC1_DMA_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_DMA_CON))
-#define DANUBE_SSC1_IRNEN ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNEN))
-#define DANUBE_SSC1_IRNICR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNICR))
-#define DANUBE_SSC1_IRNCR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNCR))
-
-/***********************************************************************/
-/* Module : GPIO register address and bits */
-/***********************************************************************/
-#define DANUBE_GPIO (0xBE100B00)
-/***Port 0 Data Output Register (0010H)***/
-#define DANUBE_GPIO_P0_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0010))
-/***Port 1 Data Output Register (0040H)***/
-#define DANUBE_GPIO_P1_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0040))
-/***Port 0 Data Input Register (0014H)***/
-#define DANUBE_GPIO_P0_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0014))
-/***Port 1 Data Input Register (0044H)***/
-#define DANUBE_GPIO_P1_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0044))
-/***Port 0 Direction Register (0018H)***/
-#define DANUBE_GPIO_P0_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0018))
-/***Port 1 Direction Register (0048H)***/
-#define DANUBE_GPIO_P1_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0048))
-/***Port 0 Alternate Function Select Register 0 (001C H) ***/
-#define DANUBE_GPIO_P0_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x001C))
-/***Port 1 Alternate Function Select Register 0 (004C H) ***/
-#define DANUBE_GPIO_P1_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x004C))
-/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
-#define DANUBE_GPIO_P0_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0020))
-/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
-#define DANUBE_GPIO_P1_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0050))
-/***Port 0 Open Drain Control Register (0024H)***/
-#define DANUBE_GPIO_P0_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0024))
-/***Port 1 Open Drain Control Register (0054H)***/
-#define DANUBE_GPIO_P1_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0054))
-/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
-#define DANUBE_GPIO_P0_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0028))
-/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
-#define DANUBE_GPIO_P1_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0058))
-/***Port 0 Pull Up/Pull Down Select Register (002C H)***/
-#define DANUBE_GPIO_P0_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x002C))
-/***Port 1 Pull Up/Pull Down Select Register (005C H)***/
-#define DANUBE_GPIO_P1_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x005C))
-/***Port 0 Pull Up Device Enable Register (0030 H)***/
-#define DANUBE_GPIO_P0_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0030))
-/***Port 1 Pull Up Device Enable Register (0060 H)***/
-#define DANUBE_GPIO_P1_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0060))
-/***********************************************************************/
-/* Module : CGU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_CGU (0xBF103000)
-/***********************************************************************/
-/***CGU Clock PLL0 ***/
-#define DANUBE_CGU_PLL0_CFG ((volatile u32*)(DANUBE_CGU+ 0x0004))
-/***CGU Clock PLL1 ***/
-#define DANUBE_CGU_PLL1_CFG ((volatile u32*)(DANUBE_CGU+ 0x0008))
-/***CGU Clock SYS Mux Register***/
-#define DANUBE_CGU_SYS ((volatile u32*)(DANUBE_CGU+ 0x0010))
-/***CGU Interface Clock Control Register***/
-#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018))
-/***CGU PCI Clock Control Register**/
-#define DANUBE_CGU_PCICR ((volatile u32*)(DANUBE_CGU+ 0x0034))
-#define CLOCK_60M 60000000
-#define CLOCK_83M 83333333
-#define CLOCK_111M 111111111
-#define CLOCK_133M 133333333
-#define CLOCK_167M 166666667
-#define CLOCK_333M 333333333
-
-/***********************************************************************/
-/* Module : MCD register address and bits */
-/***********************************************************************/
-#define DANUBE_MCD (KSEG1+0x1F106000)
-
-/***Manufacturer Identification Register***/
-#define DANUBE_MCD_MANID ((volatile u32*)(DANUBE_MCD+ 0x0024))
-#define DANUBE_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5)
-
-/***Chip Identification Register***/
-#define DANUBE_MCD_CHIPID ((volatile u32*)(DANUBE_MCD+ 0x0028))
-#define DANUBE_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define DANUBE_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define DANUBE_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define DANUBE_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
-#define DANUBE_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1))
-#define DANUBE_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1)
-
-#define DANUBE_CHIPID_STANDARD 0x00EB
-#define DANUBE_CHIPID_YANGTSE 0x00ED
-
-/***Redesign Tracing Identification Register***/
-#define DANUBE_MCD_RTID ((volatile u32*)(DANUBE_MCD+ 0x002C))
-#define DANUBE_MCD_RTID_LC (1 << 15)
-#define DANUBE_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : EBU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_EBU (0xBE105300)
-
-/***********************************************************************/
-
-/***EBU Clock Control Register***/
-#define DANUBE_EBU_CLC ((volatile u32*)(DANUBE_EBU+ 0x0000))
-#define DANUBE_EBU_CLC_DISS (1 << 1)
-#define DANUBE_EBU_CLC_DISR (1 << 0)
-
-/***EBU Global Control Register***/
-#define DANUBE_EBU_CON ((volatile u32*)(DANUBE_EBU+ 0x0010))
-#define DANUBE_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20)
-#define DANUBE_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16)
-#define DANUBE_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define DANUBE_EBU_CON_ARBSYNC (1 << 5)
-#define DANUBE_EBU_CON_1 (1 << 3)
-
-/***EBU Address Select Register 0***/
-#define DANUBE_EBU_ADDSEL0 ((volatile u32*)(DANUBE_EBU+ 0x0020))
-#define DANUBE_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL0_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL0_REGEN (1 << 0)
-
-/***EBU Address Select Register 1***/
-#define DANUBE_EBU_ADDSEL1 ((volatile u32*)(DANUBE_EBU+ 0x0024))
-#define DANUBE_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL1_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL1_REGEN (1 << 0)
-
-/***EBU Address Select Register 2***/
-#define DANUBE_EBU_ADDSEL2 ((volatile u32*)(DANUBE_EBU+ 0x0028))
-#define DANUBE_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL2_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL2_REGEN (1 << 0)
-
-/***EBU Address Select Register 3***/
-#define DANUBE_EBU_ADDSEL3 ((volatile u32*)(DANUBE_EBU+ 0x0028))
-#define DANUBE_EBU_ADDSEL3_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL3_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL3_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL3_REGEN (1 << 0)
-
-/***EBU Bus Configuration Register 0***/
-#define DANUBE_EBU_BUSCON0 ((volatile u32*)(DANUBE_EBU+ 0x0060))
-#define DANUBE_EBU_BUSCON0_WRDIS (1 << 31)
-#define DANUBE_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define DANUBE_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define DANUBE_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define DANUBE_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define DANUBE_EBU_BUSCON0_WAITINV (1 << 19)
-#define DANUBE_EBU_BUSCON0_SETUP (1 << 18)
-#define DANUBE_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define DANUBE_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define DANUBE_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define DANUBE_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 1***/
-#define DANUBE_EBU_BUSCON1 ((volatile u32*)(DANUBE_EBU+ 0x0064))
-#define DANUBE_EBU_BUSCON1_WRDIS (1 << 31)
-#define DANUBE_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define DANUBE_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define DANUBE_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define DANUBE_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define DANUBE_EBU_BUSCON1_WAITINV (1 << 19)
-#define DANUBE_EBU_BUSCON1_SETUP (1 << 18)
-#define DANUBE_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define DANUBE_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define DANUBE_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define DANUBE_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 2***/
-#define DANUBE_EBU_BUSCON2 ((volatile u32*)(DANUBE_EBU+ 0x0068))
-#define DANUBE_EBU_BUSCON2_WRDIS (1 << 31)
-#define DANUBE_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define DANUBE_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define DANUBE_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define DANUBE_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define DANUBE_EBU_BUSCON2_WAITINV (1 << 19)
-#define DANUBE_EBU_BUSCON2_SETUP (1 << 18)
-#define DANUBE_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define DANUBE_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define DANUBE_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define DANUBE_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-#define DANUBE_EBU_PCC_CON ((volatile u32*)(DANUBE_EBU+ 0x0090))
-#define DANUBE_EBU_PCC_STAT ((volatile u32*)(DANUBE_EBU+ 0x0094))
-#define DANUBE_EBU_PCC_ISTAT ((volatile u32*)(DANUBE_EBU+ 0x00A0))
-#define DANUBE_EBU_PCC_IEN ((volatile u32*)(DANUBE_EBU+ 0x00A4))
-/***********************************************************************/
-/* Module : SDRAM register address and bits */
-/***********************************************************************/
-
-#define DANUBE_SDRAM (0xBF800000)
-/***********************************************************************/
-
-/***MC Access Error Cause Register***/
-#define DANUBE_SDRAM_MC_ERRCAUSE ((volatile u32*)(DANUBE_SDRAM+ 0x0100))
-#define DANUBE_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
-#define DANUBE_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN)
-
-/***MC Access Error Address Register***/
-#define DANUBE_SDRAM_MC_ERRADDR ((volatile u32*)(DANUBE_SDRAM+ 0x0108))
-#define DANUBE_SDRAM_MC_ERRADDR_ADDR
-
-/***MC I/O General Purpose Register***/
-#define DANUBE_SDRAM_MC_IOGP ((volatile u32*)(DANUBE_SDRAM+ 0x0800))
-#define DANUBE_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28)
-#define DANUBE_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24)
-#define DANUBE_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20)
-#define DANUBE_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define DANUBE_SDRAM_MC_IOGP_CPS (1 << 11)
-#define DANUBE_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8)
-#define DANUBE_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***MC Self Refresh Register***/
-#define DANUBE_SDRAM_MC_SELFRFSH ((volatile u32*)(DANUBE_SDRAM+ 0x0A00))
-#define DANUBE_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
-#define DANUBE_SDRAM_MC_SELFRFSH_PWD (1 << 0)
-#define DANUBE_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2)
-
-/***MC Enable Register***/
-#define DANUBE_SDRAM_MC_CTRLENA ((volatile u32*)(DANUBE_SDRAM+ 0x1000))
-#define DANUBE_SDRAM_MC_CTRLENA_ENA (1 << 0)
-#define DANUBE_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1)
-
-/***MC Mode Register Setup Code***/
-#define DANUBE_SDRAM_MC_MRSCODE ((volatile u32*)(DANUBE_SDRAM+ 0x1008))
-#define DANUBE_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7)
-#define DANUBE_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_MRSCODE_WT (1 << 3)
-#define DANUBE_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***MC Configuration Data-word Width Register***/
-#define DANUBE_SDRAM_MC_CFGDW ((volatile u32*)(DANUBE_SDRAM+ 0x1010))
-#define DANUBE_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4)
-
-/***MC Configuration Physical Bank 0 Register***/
-#define DANUBE_SDRAM_MC_CFGPB0 ((volatile u32*)(DANUBE_SDRAM+ 0x1018))
-#define DANUBE_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define DANUBE_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8)
-#define DANUBE_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16)
-
-/***MC Latency Register***/
-#define DANUBE_SDRAM_MC_LATENCY ((volatile u32*)(DANUBE_SDRAM+ 0x1038))
-#define DANUBE_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define DANUBE_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8)
-#define DANUBE_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20)
-
-/***MC Refresh Cycle Time Register***/
-#define DANUBE_SDRAM_MC_TREFRESH ((volatile u32*)(DANUBE_SDRAM+ 0x1040))
-#define DANUBE_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
-
-/***********************************************************************/
-/* Module : GPTC register address and bits */
-/***********************************************************************/
-
-#define DANUBE_GPTC (KSEG1 + 0x1E100A00)
-#define DANUBE_GPTC_CLC ((volatile u32*) (DANUBE_GPTC + 0x0000))
-#define DANUBE_GPTC_ID ((volatile u32*) (DANUBE_GPTC + 0x0008))
-#define DANUBE_GPTC_IRNEN ((volatile u32*) (DANUBE_GPTC + 0x00F4))
-#define DANUBE_GPTC_IRNICR ((volatile u32*) (DANUBE_GPTC + 0x00F8)
-#define DANUBE_GPTC_IRNCR ((volatile u32*) (DANUBE_GPTC + 0x00FC))
-
-#define DANUBE_GPTC_CON_1A ((volatile u32*) (DANUBE_GPTC + 0x0010))
-#define DANUBE_GPTC_RUN_1A ((volatile u32*) (DANUBE_GPTC + 0x0018))
-#define DANUBE_GPTC_RELOAD_1A ((volatile u32*) (DANUBE_GPTC + 0x0020))
-#define DANUBE_GPTC_COUNT_1A ((volatile u32*) (DANUBE_GPTC + 0x0028))
-
-#define DANUBE_GPTC_CON_1B ((volatile u32*) (DANUBE_GPTC + 0x0014))
-#define DANUBE_GPTC_RUN_1B ((volatile u32*) (DANUBE_GPTC + 0x001C))
-#define DANUBE_GPTC_RELOAD_1B ((volatile u32*) (DANUBE_GPTC + 0x0024))
-#define DANUBE_GPTC_COUNT_1B ((volatile u32*) (DANUBE_GPTC + 0x002C))
-
-#define DANUBE_GPTC_CON_2A ((volatile u32*) (DANUBE_GPTC + 0x0030))
-#define DANUBE_GPTC_RUN_2A ((volatile u32*) (DANUBE_GPTC + 0x0038))
-#define DANUBE_GPTC_RELOAD_2A ((volatile u32*) (DANUBE_GPTC + 0x0040))
-#define DANUBE_GPTC_COUNT_2A ((volatile u32*) (DANUBE_GPTC + 0x0048))
-
-#define DANUBE_GPTC_CON_2B ((volatile u32*) (DANUBE_GPTC + 0x0034))
-#define DANUBE_GPTC_RUN_2B ((volatile u32*) (DANUBE_GPTC + 0x003C))
-#define DANUBE_GPTC_RELOAD_2B ((volatile u32*) (DANUBE_GPTC + 0x0044))
-#define DANUBE_GPTC_COUNT_2B ((volatile u32*) (DANUBE_GPTC + 0x004C))
-
-/***********************************************************************/
-/* Module : GPTU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_GPTU (0xB8000300)
-/***********************************************************************/
-
-/***GPT Clock Control Register***/
-#define DANUBE_GPTU_GPT_CLC ((volatile u32*)(DANUBE_GPTU+ 0x0000))
-#define DANUBE_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_GPTU_GPT_CLC_DISS (1 << 1)
-#define DANUBE_GPTU_GPT_CLC_DISR (1 << 0)
-
-/***GPT Timer 3 Control Register***/
-#define DANUBE_GPTU_GPT_T3CON ((volatile u32*)(DANUBE_GPTU+ 0x0014))
-#define DANUBE_GPTU_GPT_T3CON_T3RDIR (1 << 15)
-#define DANUBE_GPTU_GPT_T3CON_T3CHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_T3CON_T3EDGE (1 << 13)
-#define DANUBE_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11)
-#define DANUBE_GPTU_GPT_T3CON_T3OTL (1 << 10)
-#define DANUBE_GPTU_GPT_T3CON_T3UD (1 << 7)
-#define DANUBE_GPTU_GPT_T3CON_T3R (1 << 6)
-#define DANUBE_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write Hardware Modified Timer 3 Control Register
-If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT3CON ((volatile u32*)(DANUBE_GPTU+ 0x004C))
-#define DANUBE_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15)
-#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13)
-#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12)
-#define DANUBE_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11)
-#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10)
-
-/***GPT Timer 2 Control Register***/
-#define DANUBE_GPTU_GPT_T2CON ((volatile u32*)(DANUBE_GPTU+ 0x0010))
-#define DANUBE_GPTU_GPT_T2CON_TxRDIR (1 << 15)
-#define DANUBE_GPTU_GPT_T2CON_TxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_T2CON_TxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_T2CON_TxIRDIS (1 << 12)
-#define DANUBE_GPTU_GPT_T2CON_TxRC (1 << 9)
-#define DANUBE_GPTU_GPT_T2CON_TxUD (1 << 7)
-#define DANUBE_GPTU_GPT_T2CON_TxR (1 << 6)
-#define DANUBE_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Control Register***/
-#define DANUBE_GPTU_GPT_T4CON ((volatile u32*)(DANUBE_GPTU+ 0x0018))
-#define DANUBE_GPTU_GPT_T4CON_TxRDIR (1 << 15)
-#define DANUBE_GPTU_GPT_T4CON_TxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_T4CON_TxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_T4CON_TxIRDIS (1 << 12)
-#define DANUBE_GPTU_GPT_T4CON_TxRC (1 << 9)
-#define DANUBE_GPTU_GPT_T4CON_TxUD (1 << 7)
-#define DANUBE_GPTU_GPT_T4CON_TxR (1 << 6)
-#define DANUBE_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 2 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT2CON ((volatile u32*)(DANUBE_GPTU+ 0x0048))
-#define DANUBE_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15)
-#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12)
-
-/***GPT Write HW Modified Timer 4 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT4CON ((volatile u32*)(DANUBE_GPTU+ 0x0050))
-#define DANUBE_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15)
-#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12)
-
-/***GPT Capture Reload Register***/
-#define DANUBE_GPTU_GPT_CAPREL ((volatile u32*)(DANUBE_GPTU+ 0x0030))
-#define DANUBE_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 2 Register***/
-#define DANUBE_GPTU_GPT_T2 ((volatile u32*)(DANUBE_GPTU+ 0x0034))
-#define DANUBE_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 3 Register***/
-#define DANUBE_GPTU_GPT_T3 ((volatile u32*)(DANUBE_GPTU+ 0x0038))
-#define DANUBE_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Register***/
-#define DANUBE_GPTU_GPT_T4 ((volatile u32*)(DANUBE_GPTU+ 0x003C))
-#define DANUBE_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 5 Register***/
-#define DANUBE_GPTU_GPT_T5 ((volatile u32*)(DANUBE_GPTU+ 0x0040))
-#define DANUBE_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Register***/
-#define DANUBE_GPTU_GPT_T6 ((volatile u32*)(DANUBE_GPTU+ 0x0044))
-#define DANUBE_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Control Register***/
-#define DANUBE_GPTU_GPT_T6CON ((volatile u32*)(DANUBE_GPTU+ 0x0020))
-#define DANUBE_GPTU_GPT_T6CON_T6SR (1 << 15)
-#define DANUBE_GPTU_GPT_T6CON_T6CLR (1 << 14)
-#define DANUBE_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11)
-#define DANUBE_GPTU_GPT_T6CON_T6OTL (1 << 10)
-#define DANUBE_GPTU_GPT_T6CON_T6UD (1 << 7)
-#define DANUBE_GPTU_GPT_T6CON_T6R (1 << 6)
-#define DANUBE_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 6 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT6CON ((volatile u32*)(DANUBE_GPTU+ 0x0054))
-#define DANUBE_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11)
-#define DANUBE_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10)
-
-/***GPT Timer 5 Control Register***/
-#define DANUBE_GPTU_GPT_T5CON ((volatile u32*)(DANUBE_GPTU+ 0x001C))
-#define DANUBE_GPTU_GPT_T5CON_T5SC (1 << 15)
-#define DANUBE_GPTU_GPT_T5CON_T5CLR (1 << 14)
-#define DANUBE_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12)
-#define DANUBE_GPTU_GPT_T5CON_T5CC (1 << 11)
-#define DANUBE_GPTU_GPT_T5CON_CT3 (1 << 10)
-#define DANUBE_GPTU_GPT_T5CON_T5RC (1 << 9)
-#define DANUBE_GPTU_GPT_T5CON_T5UDE (1 << 8)
-#define DANUBE_GPTU_GPT_T5CON_T5UD (1 << 7)
-#define DANUBE_GPTU_GPT_T5CON_T5R (1 << 6)
-#define DANUBE_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : IOM register address and bits */
-/***********************************************************************/
-
-#define DANUBE_IOM (0xBF105000)
-/***********************************************************************/
-
-/***Receive FIFO***/
-#define DANUBE_IOM_RFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000))
-#define DANUBE_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Transmit FIFO***/
-#define DANUBE_IOM_XFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000))
-#define DANUBE_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Interrupt Status Register HDLC***/
-#define DANUBE_IOM_ISTAH ((volatile u32*)(DANUBE_IOM+ 0x0080))
-#define DANUBE_IOM_ISTAH_RME (1 << 7)
-#define DANUBE_IOM_ISTAH_RPF (1 << 6)
-#define DANUBE_IOM_ISTAH_RFO (1 << 5)
-#define DANUBE_IOM_ISTAH_XPR (1 << 4)
-#define DANUBE_IOM_ISTAH_XMR (1 << 3)
-#define DANUBE_IOM_ISTAH_XDU (1 << 2)
-
-/***Interrupt Mask Register HDLC***/
-#define DANUBE_IOM_MASKH ((volatile u32*)(DANUBE_IOM+ 0x0080))
-#define DANUBE_IOM_MASKH_RME (1 << 7)
-#define DANUBE_IOM_MASKH_RPF (1 << 6)
-#define DANUBE_IOM_MASKH_RFO (1 << 5)
-#define DANUBE_IOM_MASKH_XPR (1 << 4)
-#define DANUBE_IOM_MASKH_XMR (1 << 3)
-#define DANUBE_IOM_MASKH_XDU (1 << 2)
-
-/***Status Register***/
-#define DANUBE_IOM_STAR ((volatile u32*)(DANUBE_IOM+ 0x0084))
-#define DANUBE_IOM_STAR_XDOV (1 << 7)
-#define DANUBE_IOM_STAR_XFW (1 << 6)
-#define DANUBE_IOM_STAR_RACI (1 << 3)
-#define DANUBE_IOM_STAR_XACI (1 << 1)
-
-/***Command Register***/
-#define DANUBE_IOM_CMDR ((volatile u32*)(DANUBE_IOM+ 0x0084))
-#define DANUBE_IOM_CMDR_RMC (1 << 7)
-#define DANUBE_IOM_CMDR_RRES (1 << 6)
-#define DANUBE_IOM_CMDR_XTF (1 << 3)
-#define DANUBE_IOM_CMDR_XME (1 << 1)
-#define DANUBE_IOM_CMDR_XRES (1 << 0)
-
-/***Mode Register***/
-#define DANUBE_IOM_MODEH ((volatile u32*)(DANUBE_IOM+ 0x0088))
-#define DANUBE_IOM_MODEH_MDS2 (1 << 7)
-#define DANUBE_IOM_MODEH_MDS1 (1 << 6)
-#define DANUBE_IOM_MODEH_MDS0 (1 << 5)
-#define DANUBE_IOM_MODEH_RAC (1 << 3)
-#define DANUBE_IOM_MODEH_DIM2 (1 << 2)
-#define DANUBE_IOM_MODEH_DIM1 (1 << 1)
-#define DANUBE_IOM_MODEH_DIM0 (1 << 0)
-
-/***Extended Mode Register***/
-#define DANUBE_IOM_EXMR ((volatile u32*)(DANUBE_IOM+ 0x008C))
-#define DANUBE_IOM_EXMR_XFBS (1 << 7)
-#define DANUBE_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5)
-#define DANUBE_IOM_EXMR_SRA (1 << 4)
-#define DANUBE_IOM_EXMR_XCRC (1 << 3)
-#define DANUBE_IOM_EXMR_RCRC (1 << 2)
-#define DANUBE_IOM_EXMR_ITF (1 << 0)
-
-/***SAPI1 Register***/
-#define DANUBE_IOM_SAP1 ((volatile u32*)(DANUBE_IOM+ 0x0094))
-#define DANUBE_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define DANUBE_IOM_SAP1_MHA (1 << 0)
-
-/***Receive Frame Byte Count Low***/
-#define DANUBE_IOM_RBCL ((volatile u32*)(DANUBE_IOM+ 0x0098))
-#define DANUBE_IOM_RBCL_RBC(value) (1 << value)
-
-/***SAPI2 Register***/
-#define DANUBE_IOM_SAP2 ((volatile u32*)(DANUBE_IOM+ 0x0098))
-#define DANUBE_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define DANUBE_IOM_SAP2_MLA (1 << 0)
-
-/***Receive Frame Byte Count High***/
-#define DANUBE_IOM_RBCH ((volatile u32*)(DANUBE_IOM+ 0x009C))
-#define DANUBE_IOM_RBCH_OV (1 << 4)
-#define DANUBE_IOM_RBCH_RBC11 (1 << 3)
-#define DANUBE_IOM_RBCH_RBC10 (1 << 2)
-#define DANUBE_IOM_RBCH_RBC9 (1 << 1)
-#define DANUBE_IOM_RBCH_RBC8 (1 << 0)
-
-/***TEI1 Register 1***/
-#define DANUBE_IOM_TEI1 ((volatile u32*)(DANUBE_IOM+ 0x009C))
-#define DANUBE_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1)
-#define DANUBE_IOM_TEI1_EA (1 << 0)
-
-/***Receive Status Register***/
-#define DANUBE_IOM_RSTA ((volatile u32*)(DANUBE_IOM+ 0x00A0))
-#define DANUBE_IOM_RSTA_VFR (1 << 7)
-#define DANUBE_IOM_RSTA_RDO (1 << 6)
-#define DANUBE_IOM_RSTA_CRC (1 << 5)
-#define DANUBE_IOM_RSTA_RAB (1 << 4)
-#define DANUBE_IOM_RSTA_SA1 (1 << 3)
-#define DANUBE_IOM_RSTA_SA0 (1 << 2)
-#define DANUBE_IOM_RSTA_TA (1 << 0)
-#define DANUBE_IOM_RSTA_CR (1 << 1)
-
-/***TEI2 Register***/
-#define DANUBE_IOM_TEI2 ((volatile u32*)(DANUBE_IOM+ 0x00A0))
-#define DANUBE_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1)
-#define DANUBE_IOM_TEI2_EA (1 << 0)
-
-/***Test Mode Register HDLC***/
-#define DANUBE_IOM_TMH ((volatile u32*)(DANUBE_IOM+ 0x00A4))
-#define DANUBE_IOM_TMH_TLP (1 << 0)
-
-/***Command/Indication Receive 0***/
-#define DANUBE_IOM_CIR0 ((volatile u32*)(DANUBE_IOM+ 0x00B8))
-#define DANUBE_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_IOM_CIR0_CIC0 (1 << 3)
-#define DANUBE_IOM_CIR0_CIC1 (1 << 2)
-#define DANUBE_IOM_CIR0_SG (1 << 1)
-#define DANUBE_IOM_CIR0_BAS (1 << 0)
-
-/***Command/Indication Transmit 0***/
-#define DANUBE_IOM_CIX0 ((volatile u32*)(DANUBE_IOM+ 0x00B8))
-#define DANUBE_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_IOM_CIX0_TBA2 (1 << 3)
-#define DANUBE_IOM_CIX0_TBA1 (1 << 2)
-#define DANUBE_IOM_CIX0_TBA0 (1 << 1)
-#define DANUBE_IOM_CIX0_BAC (1 << 0)
-
-/***Command/Indication Receive 1***/
-#define DANUBE_IOM_CIR1 ((volatile u32*)(DANUBE_IOM+ 0x00BC))
-#define DANUBE_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-
-/***Command/Indication Transmit 1***/
-#define DANUBE_IOM_CIX1 ((volatile u32*)(DANUBE_IOM+ 0x00BC))
-#define DANUBE_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define DANUBE_IOM_CIX1_CICW (1 << 1)
-#define DANUBE_IOM_CIX1_CI1E (1 << 0)
-
-/***Controller Data Access Reg. (CH10)***/
-#define DANUBE_IOM_CDA10 ((volatile u32*)(DANUBE_IOM+ 0x0100))
-#define DANUBE_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH11)***/
-#define DANUBE_IOM_CDA11 ((volatile u32*)(DANUBE_IOM+ 0x0104))
-#define DANUBE_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH20)***/
-#define DANUBE_IOM_CDA20 ((volatile u32*)(DANUBE_IOM+ 0x0108))
-#define DANUBE_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH21)***/
-#define DANUBE_IOM_CDA21 ((volatile u32*)(DANUBE_IOM+ 0x010C))
-#define DANUBE_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH10)***/
-#define DANUBE_IOM_CDA_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0110))
-#define DANUBE_IOM_CDA_TSDP10_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH11)***/
-#define DANUBE_IOM_CDA_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0114))
-#define DANUBE_IOM_CDA_TSDP11_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH20)***/
-#define DANUBE_IOM_CDA_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0118))
-#define DANUBE_IOM_CDA_TSDP20_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH21)***/
-#define DANUBE_IOM_CDA_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x011C))
-#define DANUBE_IOM_CDA_TSDP21_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH10)***/
-#define DANUBE_IOM_CO_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0120))
-#define DANUBE_IOM_CO_TSDP10_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH11)***/
-#define DANUBE_IOM_CO_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0124))
-#define DANUBE_IOM_CO_TSDP11_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH20)***/
-#define DANUBE_IOM_CO_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0128))
-#define DANUBE_IOM_CO_TSDP20_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH21)***/
-#define DANUBE_IOM_CO_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x012C))
-#define DANUBE_IOM_CO_TSDP21_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Ctrl. Reg. Contr. Data Access CH1x***/
-#define DANUBE_IOM_CDA1_CR ((volatile u32*)(DANUBE_IOM+ 0x0138))
-#define DANUBE_IOM_CDA1_CR_EN_TBM (1 << 5)
-#define DANUBE_IOM_CDA1_CR_EN_I1 (1 << 4)
-#define DANUBE_IOM_CDA1_CR_EN_I0 (1 << 3)
-#define DANUBE_IOM_CDA1_CR_EN_O1 (1 << 2)
-#define DANUBE_IOM_CDA1_CR_EN_O0 (1 << 1)
-#define DANUBE_IOM_CDA1_CR_SWAP (1 << 0)
-
-/***Ctrl. Reg. Contr. Data Access CH1x***/
-#define DANUBE_IOM_CDA2_CR ((volatile u32*)(DANUBE_IOM+ 0x013C))
-#define DANUBE_IOM_CDA2_CR_EN_TBM (1 << 5)
-#define DANUBE_IOM_CDA2_CR_EN_I1 (1 << 4)
-#define DANUBE_IOM_CDA2_CR_EN_I0 (1 << 3)
-#define DANUBE_IOM_CDA2_CR_EN_O1 (1 << 2)
-#define DANUBE_IOM_CDA2_CR_EN_O0 (1 << 1)
-#define DANUBE_IOM_CDA2_CR_SWAP (1 << 0)
-
-/***Control Register B-Channel Data***/
-#define DANUBE_IOM_BCHA_CR ((volatile u32*)(DANUBE_IOM+ 0x0144))
-#define DANUBE_IOM_BCHA_CR_EN_BC2 (1 << 4)
-#define DANUBE_IOM_BCHA_CR_EN_BC1 (1 << 3)
-
-/***Control Register B-Channel Data***/
-#define DANUBE_IOM_BCHB_CR ((volatile u32*)(DANUBE_IOM+ 0x0148))
-#define DANUBE_IOM_BCHB_CR_EN_BC2 (1 << 4)
-#define DANUBE_IOM_BCHB_CR_EN_BC1 (1 << 3)
-
-/***Control Reg. for HDLC and CI1 Data***/
-#define DANUBE_IOM_DCI_CR ((volatile u32*)(DANUBE_IOM+ 0x014C))
-#define DANUBE_IOM_DCI_CR_DPS_CI1 (1 << 7)
-#define DANUBE_IOM_DCI_CR_EN_CI1 (1 << 6)
-#define DANUBE_IOM_DCI_CR_EN_D (1 << 5)
-
-/***Control Reg. for HDLC and CI1 Data***/
-#define DANUBE_IOM_DCIC_CR ((volatile u32*)(DANUBE_IOM+ 0x014C))
-#define DANUBE_IOM_DCIC_CR_DPS_CI0 (1 << 7)
-#define DANUBE_IOM_DCIC_CR_EN_CI0 (1 << 6)
-#define DANUBE_IOM_DCIC_CR_DPS_D (1 << 5)
-
-/***Control Reg. Serial Data Strobe x***/
-#define DANUBE_IOM_SDS_CR ((volatile u32*)(DANUBE_IOM+ 0x0154))
-#define DANUBE_IOM_SDS_CR_ENS_TSS (1 << 7)
-#define DANUBE_IOM_SDS_CR_ENS_TSS_1 (1 << 6)
-#define DANUBE_IOM_SDS_CR_ENS_TSS_3 (1 << 5)
-#define DANUBE_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Control Register IOM Data***/
-#define DANUBE_IOM_IOM_CR ((volatile u32*)(DANUBE_IOM+ 0x015C))
-#define DANUBE_IOM_IOM_CR_SPU (1 << 7)
-#define DANUBE_IOM_IOM_CR_CI_CS (1 << 5)
-#define DANUBE_IOM_IOM_CR_TIC_DIS (1 << 4)
-#define DANUBE_IOM_IOM_CR_EN_BCL (1 << 3)
-#define DANUBE_IOM_IOM_CR_CLKM (1 << 2)
-#define DANUBE_IOM_IOM_CR_Res (1 << 1)
-#define DANUBE_IOM_IOM_CR_DIS_IOM (1 << 0)
-
-/***Synchronous Transfer Interrupt***/
-#define DANUBE_IOM_STI ((volatile u32*)(DANUBE_IOM+ 0x0160))
-#define DANUBE_IOM_STI_STOV21 (1 << 7)
-#define DANUBE_IOM_STI_STOV20 (1 << 6)
-#define DANUBE_IOM_STI_STOV11 (1 << 5)
-#define DANUBE_IOM_STI_STOV10 (1 << 4)
-#define DANUBE_IOM_STI_STI21 (1 << 3)
-#define DANUBE_IOM_STI_STI20 (1 << 2)
-#define DANUBE_IOM_STI_STI11 (1 << 1)
-#define DANUBE_IOM_STI_STI10 (1 << 0)
-
-/***Acknowledge Synchronous Transfer Interrupt***/
-#define DANUBE_IOM_ASTI ((volatile u32*)(DANUBE_IOM+ 0x0160))
-#define DANUBE_IOM_ASTI_ACK21 (1 << 3)
-#define DANUBE_IOM_ASTI_ACK20 (1 << 2)
-#define DANUBE_IOM_ASTI_ACK11 (1 << 1)
-#define DANUBE_IOM_ASTI_ACK10 (1 << 0)
-
-/***Mask Synchronous Transfer Interrupt***/
-#define DANUBE_IOM_MSTI ((volatile u32*)(DANUBE_IOM+ 0x0164))
-#define DANUBE_IOM_MSTI_STOV21 (1 << 7)
-#define DANUBE_IOM_MSTI_STOV20 (1 << 6)
-#define DANUBE_IOM_MSTI_STOV11 (1 << 5)
-#define DANUBE_IOM_MSTI_STOV10 (1 << 4)
-#define DANUBE_IOM_MSTI_STI21 (1 << 3)
-#define DANUBE_IOM_MSTI_STI20 (1 << 2)
-#define DANUBE_IOM_MSTI_STI11 (1 << 1)
-#define DANUBE_IOM_MSTI_STI10 (1 << 0)
-
-/***Configuration Register for Serial Data Strobes***/
-#define DANUBE_IOM_SDS_CONF ((volatile u32*)(DANUBE_IOM+ 0x0168))
-#define DANUBE_IOM_SDS_CONF_SDS_BCL (1 << 0)
-
-/***Monitoring CDA Bits***/
-#define DANUBE_IOM_MCDA ((volatile u32*)(DANUBE_IOM+ 0x016C))
-#define DANUBE_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define DANUBE_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : ASC0 register address and bits */
-/***********************************************************************/
-#define DANUBE_ASC0 (KSEG1+0x1E100400)
-/***********************************************************************/
-#define DANUBE_ASC0_TBUF ((volatile u32*)(DANUBE_ASC0 + 0x0020))
-#define DANUBE_ASC0_RBUF ((volatile u32*)(DANUBE_ASC0 + 0x0024))
-#define DANUBE_ASC0_FSTAT ((volatile u32*)(DANUBE_ASC0 + 0x0048))
-#define DANUBE_ASC0_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
-#define DANUBE_ASC0_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
-#define DANUBE_ASC0_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC0_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : ASC1 register address and bits */
-/***********************************************************************/
-
-#define DANUBE_ASC1 (KSEG1+0x1E100C00)
-/***********************************************************************/
-/***ASC Clock Control Register***/
-#define DANUBE_ASC1_CLC ((volatile u32*)(DANUBE_ASC1+ 0x0000))
-#define DANUBE_ASC1_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_ASC1_CLC_DISS (1 << 1)
-#define DANUBE_ASC1_CLC_DISR (1 << 0)
-
-/***ASC Port Input Select Register***/
-#define DANUBE_ASC1_PISEL ((volatile u32*)(DANUBE_ASC1+ 0x0004))
-#define DANUBE_ASC1_PISEL ((volatile u32*)(DANUBE_ASC1+ 0x0004))
-#define DANUBE_ASC1_PISEL_RIS (1 << 0)
-
-/***ASC Control Register***/
-#define DANUBE_ASC1_CON ((volatile u32*)(DANUBE_ASC1+ 0x0010))
-#define DANUBE_ASC1_CON_BEN (1 << 20)
-#define DANUBE_ASC1_CON_TOEN (1 << 20)
-#define DANUBE_ASC1_CON_ROEN (1 << 19)
-#define DANUBE_ASC1_CON_RUEN (1 << 18)
-#define DANUBE_ASC1_CON_FEN (1 << 17)
-#define DANUBE_ASC1_CON_PAL (1 << 16)
-#define DANUBE_ASC1_CON_R (1 << 15)
-#define DANUBE_ASC1_CON_ACO (1 << 14)
-#define DANUBE_ASC1_CON_LB (1 << 13)
-#define DANUBE_ASC1_CON_ERCLK (1 << 10)
-#define DANUBE_ASC1_CON_FDE (1 << 9)
-#define DANUBE_ASC1_CON_BRS (1 << 8)
-#define DANUBE_ASC1_CON_STP (1 << 7)
-#define DANUBE_ASC1_CON_SP (1 << 6)
-#define DANUBE_ASC1_CON_ODD (1 << 5)
-#define DANUBE_ASC1_CON_PEN (1 << 4)
-#define DANUBE_ASC1_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***ASC Staus Register***/
-#define DANUBE_ASC1_STATE ((volatile u32*)(DANUBE_ASC1+ 0x0014))
-/***ASC Write Hardware Modified Control Register***/
-#define DANUBE_ASC1_WHBSTATE ((volatile u32*)(DANUBE_ASC1+ 0x0018))
-#define DANUBE_ASC1_WHBSTATE_SETBE (1 << 113)
-#define DANUBE_ASC1_WHBSTATE_SETTOE (1 << 12)
-#define DANUBE_ASC1_WHBSTATE_SETROE (1 << 11)
-#define DANUBE_ASC1_WHBSTATE_SETRUE (1 << 10)
-#define DANUBE_ASC1_WHBSTATE_SETFE (1 << 19)
-#define DANUBE_ASC1_WHBSTATE_SETPE (1 << 18)
-#define DANUBE_ASC1_WHBSTATE_CLRBE (1 << 17)
-#define DANUBE_ASC1_WHBSTATE_CLRTOE (1 << 6)
-#define DANUBE_ASC1_WHBSTATE_CLRROE (1 << 5)
-#define DANUBE_ASC1_WHBSTATE_CLRRUE (1 << 4)
-#define DANUBE_ASC1_WHBSTATE_CLRFE (1 << 3)
-#define DANUBE_ASC1_WHBSTATE_CLRPE (1 << 2)
-#define DANUBE_ASC1_WHBSTATE_SETREN (1 << 1)
-#define DANUBE_ASC1_WHBSTATE_CLRREN (1 << 0)
-
-/***ASC Baudrate Timer/Reload Register***/
-#define DANUBE_ASC1_BG ((volatile u32*)(DANUBE_ASC1+ 0x0050))
-#define DANUBE_ASC1_BG_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0)
-
-/***ASC Fractional Divider Register***/
-#define DANUBE_ASC1_FDV ((volatile u32*)(DANUBE_ASC1+ 0x0018))
-#define DANUBE_ASC1_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Transmit Buffer Register***/
-#define DANUBE_ASC1_TBUF ((volatile u32*)(DANUBE_ASC1+ 0x0020))
-#define DANUBE_ASC1_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Receive Buffer Register***/
-#define DANUBE_ASC1_RBUF ((volatile u32*)(DANUBE_ASC1+ 0x0024))
-#define DANUBE_ASC1_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
-
-/***ASC Autobaud Control Register***/
-#define DANUBE_ASC1_ABCON ((volatile u32*)(DANUBE_ASC1+ 0x0030))
-#define DANUBE_ASC1_ABCON_RXINV (1 << 11)
-#define DANUBE_ASC1_ABCON_TXINV (1 << 10)
-#define DANUBE_ASC1_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8)
-#define DANUBE_ASC1_ABCON_FCDETEN (1 << 4)
-#define DANUBE_ASC1_ABCON_ABDETEN (1 << 3)
-#define DANUBE_ASC1_ABCON_ABSTEN (1 << 2)
-#define DANUBE_ASC1_ABCON_AUREN (1 << 1)
-#define DANUBE_ASC1_ABCON_ABEN (1 << 0)
-
-/***Receive FIFO Control Register***/
-#define DANUBE_ASC1_RXFCON ((volatile u32*)(DANUBE_ASC1+ 0x0040))
-#define DANUBE_ASC1_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC1_RXFCON_RXFFLU (1 << 1)
-#define DANUBE_ASC1_RXFCON_RXFEN (1 << 0)
-
-/***Transmit FIFO Control Register***/
-#define DANUBE_ASC1_TXFCON ((volatile u32*)(DANUBE_ASC1+ 0x0044))
-#define DANUBE_ASC1_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC1_TXFCON_TXFFLU (1 << 1)
-#define DANUBE_ASC1_TXFCON_TXFEN (1 << 0)
-
-/***FIFO Status Register***/
-#define DANUBE_ASC1_FSTAT ((volatile u32*)(DANUBE_ASC1+ 0x0048))
-#define DANUBE_ASC1_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC1_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
-#define DANUBE_ASC1_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
-#define DANUBE_ASC1_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
-#define DANUBE_ASC1_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC1_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***ASC Autobaud Status Register***/
-#define DANUBE_ASC1_ABSTAT ((volatile u32*)(DANUBE_ASC1+ 0x0034))
-#define DANUBE_ASC1_ABSTAT_DETWAIT (1 << 4)
-#define DANUBE_ASC1_ABSTAT_SCCDET (1 << 3)
-#define DANUBE_ASC1_ABSTAT_SCSDET (1 << 2)
-#define DANUBE_ASC1_ABSTAT_FCCDET (1 << 1)
-#define DANUBE_ASC1_ABSTAT_FCSDET (1 << 0)
-
-/***ASC Write HW Modified Autobaud Status Register***/
-#define DANUBE_ASC1_WHBABSTAT ((volatile u32*)(DANUBE_ASC1+ 0x003C))
-#define DANUBE_ASC1_WHBABSTAT_SETDETWAIT (1 << 9)
-#define DANUBE_ASC1_WHBABSTAT_CLRDETWAIT (1 << 8)
-#define DANUBE_ASC1_WHBABSTAT_SETSCCDET (1 << 7)
-#define DANUBE_ASC1_WHBABSTAT_CLRSCCDET (1 << 6)
-#define DANUBE_ASC1_WHBABSTAT_SETSCSDET (1 << 5)
-#define DANUBE_ASC1_WHBABSTAT_CLRSCSDET (1 << 4)
-#define DANUBE_ASC1_WHBABSTAT_SETFCCDET (1 << 3)
-#define DANUBE_ASC1_WHBABSTAT_CLRFCCDET (1 << 2)
-#define DANUBE_ASC1_WHBABSTAT_SETFCSDET (1 << 1)
-#define DANUBE_ASC1_WHBABSTAT_CLRFCSDET (1 << 0)
-
-/***ASC IRNCR0 **/
-#define DANUBE_ASC1_IRNREN ((volatile u32*)(DANUBE_ASC1+ 0x00F4))
-#define DANUBE_ASC1_IRNICR ((volatile u32*)(DANUBE_ASC1+ 0x00FC))
-/***ASC IRNCR1 **/
-#define DANUBE_ASC1_IRNCR ((volatile u32*)(DANUBE_ASC1+ 0x00F8))
-#define ASC_IRNCR_TIR 0x4
-#define ASC_IRNCR_RIR 0x2
-#define ASC_IRNCR_EIR 0x4
-
-/***********************************************************************/
-/* Module : DMA register address and bits */
-/***********************************************************************/
-
-#define DANUBE_DMA (0xBE104100)
-/***********************************************************************/
-
-#define DANUBE_DMA_BASE DANUBE_DMA
-#define DANUBE_DMA_CLC (volatile u32*)DANUBE_DMA_BASE
-#define DANUBE_DMA_ID (volatile u32*)(DANUBE_DMA_BASE+0x08)
-#define DANUBE_DMA_CTRL (volatile u32*)(DANUBE_DMA_BASE+0x10)
-#define DANUBE_DMA_CPOLL (volatile u32*)(DANUBE_DMA_BASE+0x14)
-#define DANUBE_DMA_CS (volatile u32*)(DANUBE_DMA_BASE+0x18)
-#define DANUBE_DMA_CCTRL (volatile u32*)(DANUBE_DMA_BASE+0x1C)
-#define DANUBE_DMA_CDBA (volatile u32*)(DANUBE_DMA_BASE+0x20)
-#define DANUBE_DMA_CDLEN (volatile u32*)(DANUBE_DMA_BASE+0x24)
-#define DANUBE_DMA_CIS (volatile u32*)(DANUBE_DMA_BASE+0x28)
-#define DANUBE_DMA_CIE (volatile u32*)(DANUBE_DMA_BASE+0x2C)
-
-#define DANUBE_DMA_PS (volatile u32*)(DANUBE_DMA_BASE+0x40)
-#define DANUBE_DMA_PCTRL (volatile u32*)(DANUBE_DMA_BASE+0x44)
-
-#define DANUBE_DMA_IRNEN (volatile u32*)(DANUBE_DMA_BASE+0xf4)
-#define DANUBE_DMA_IRNCR (volatile u32*)(DANUBE_DMA_BASE+0xf8)
-#define DANUBE_DMA_IRNICR (volatile u32*)(DANUBE_DMA_BASE+0xfc)
-/***********************************************************************/
-/* Module : Debug register address and bits */
-/***********************************************************************/
-
-#define DANUBE_Debug (0xBF106000)
-/***********************************************************************/
-
-/***MCD Break Bus Switch Register***/
-#define DANUBE_Debug_MCD_BBS ((volatile u32*)(DANUBE_Debug+ 0x0000))
-#define DANUBE_Debug_MCD_BBS_BTP1 (1 << 19)
-#define DANUBE_Debug_MCD_BBS_BTP0 (1 << 18)
-#define DANUBE_Debug_MCD_BBS_BSP1 (1 << 17)
-#define DANUBE_Debug_MCD_BBS_BSP0 (1 << 16)
-#define DANUBE_Debug_MCD_BBS_BT5EN (1 << 15)
-#define DANUBE_Debug_MCD_BBS_BT4EN (1 << 14)
-#define DANUBE_Debug_MCD_BBS_BT5 (1 << 13)
-#define DANUBE_Debug_MCD_BBS_BT4 (1 << 12)
-#define DANUBE_Debug_MCD_BBS_BS5EN (1 << 7)
-#define DANUBE_Debug_MCD_BBS_BS4EN (1 << 6)
-#define DANUBE_Debug_MCD_BBS_BS5 (1 << 5)
-#define DANUBE_Debug_MCD_BBS_BS4 (1 << 4)
-
-/***MCD Multiplexer Control Register***/
-#define DANUBE_Debug_MCD_MCR ((volatile u32*)(DANUBE_Debug+ 0x0008))
-#define DANUBE_Debug_MCD_MCR_MUX5 (1 << 4)
-#define DANUBE_Debug_MCD_MCR_MUX4 (1 << 3)
-#define DANUBE_Debug_MCD_MCR_MUX1 (1 << 0)
-
-/***********************************************************************/
-/* Module : SRAM register address and bits */
-/***********************************************************************/
-
-#define DANUBE_SRAM (0xBF980000)
-/***********************************************************************/
-
-/***SRAM Size Register***/
-#define DANUBE_SRAM_SRAM_SIZE ((volatile u32*)(DANUBE_SRAM+ 0x0800))
-#define DANUBE_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : BIU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_BIU (0xBFA80000)
-/***********************************************************************/
-
-/***BIU Identification Register***/
-#define DANUBE_BIU_BIU_ID ((volatile u32*)(DANUBE_BIU+ 0x0000))
-#define DANUBE_BIU_BIU_ID_ARCH (1 << 16)
-#define DANUBE_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***BIU Access Error Cause Register***/
-#define DANUBE_BIU_BIU_ERRCAUSE ((volatile u32*)(DANUBE_BIU+ 0x0100))
-#define DANUBE_BIU_BIU_ERRCAUSE_ERR (1 << 31)
-#define DANUBE_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***BIU Access Error Address Register***/
-#define DANUBE_BIU_BIU_ERRADDR ((volatile u32*)(DANUBE_BIU+ 0x0108))
-#define DANUBE_BIU_BIU_ERRADDR_ADDR
-
-/***********************************************************************/
-/* Module : ICU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_ICU (0xBF880200)
-/***********************************************************************/
-#define DANUBE_ICU_IM0_ISR ((volatile u32*)(DANUBE_ICU + 0x0000))
-#define DANUBE_ICU_IM0_IER ((volatile u32*)(DANUBE_ICU + 0x0008))
-#define DANUBE_ICU_IM0_IOSR ((volatile u32*)(DANUBE_ICU + 0x0010))
-#define DANUBE_ICU_IM0_IRSR ((volatile u32*)(DANUBE_ICU + 0x0018))
-#define DANUBE_ICU_IM0_IMR ((volatile u32*)(DANUBE_ICU + 0x0020))
-#define DANUBE_ICU_IM0_IMR_IID (1 << 31)
-#define DANUBE_ICU_IM0_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define DANUBE_ICU_IM0_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define DANUBE_ICU_IM0_IR(value) (1 << (value))
-
-#define DANUBE_ICU_IM1_ISR ((volatile u32*)(DANUBE_ICU + 0x0028))
-#define DANUBE_ICU_IM1_IER ((volatile u32*)(DANUBE_ICU + 0x0030))
-#define DANUBE_ICU_IM1_IOSR ((volatile u32*)(DANUBE_ICU + 0x0038))
-#define DANUBE_ICU_IM1_IRSR ((volatile u32*)(DANUBE_ICU + 0x0040))
-#define DANUBE_ICU_IM1_IMR ((volatile u32*)(DANUBE_ICU + 0x0048))
-#define DANUBE_ICU_IM1_IMR_IID (1 << 31)
-#define DANUBE_ICU_IM1_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define DANUBE_ICU_IM1_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define DANUBE_ICU_IM1_IR(value) (1 << (value))
-
-#define DANUBE_ICU_IM2_ISR ((volatile u32*)(DANUBE_ICU + 0x0050))
-#define DANUBE_ICU_IM2_IER ((volatile u32*)(DANUBE_ICU + 0x0058))
-#define DANUBE_ICU_IM2_IOSR ((volatile u32*)(DANUBE_ICU + 0x0060))
-#define DANUBE_ICU_IM2_IRSR ((volatile u32*)(DANUBE_ICU + 0x0068))
-#define DANUBE_ICU_IM2_IMR ((volatile u32*)(DANUBE_ICU + 0x0070))
-#define DANUBE_ICU_IM2_IMR_IID (1 << 31)
-#define DANUBE_ICU_IM2_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define DANUBE_ICU_IM2_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define DANUBE_ICU_IM2_IR(value) (1 << (value))
-
-#define DANUBE_ICU_IM3_ISR ((volatile u32*)(DANUBE_ICU + 0x0078))
-#define DANUBE_ICU_IM3_IER ((volatile u32*)(DANUBE_ICU + 0x0080))
-#define DANUBE_ICU_IM3_IOSR ((volatile u32*)(DANUBE_ICU + 0x0088))
-#define DANUBE_ICU_IM3_IRSR ((volatile u32*)(DANUBE_ICU + 0x0090))
-#define DANUBE_ICU_IM3_IMR ((volatile u32*)(DANUBE_ICU + 0x0098))
-#define DANUBE_ICU_IM3_IMR_IID (1 << 31)
-#define DANUBE_ICU_IM3_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define DANUBE_ICU_IM3_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define DANUBE_ICU_IM3_IR(value) (1 << (value))
-
-#define DANUBE_ICU_IM4_ISR ((volatile u32*)(DANUBE_ICU + 0x00A0))
-#define DANUBE_ICU_IM4_IER ((volatile u32*)(DANUBE_ICU + 0x00A8))
-#define DANUBE_ICU_IM4_IOSR ((volatile u32*)(DANUBE_ICU + 0x00B0))
-#define DANUBE_ICU_IM4_IRSR ((volatile u32*)(DANUBE_ICU + 0x00B8))
-#define DANUBE_ICU_IM4_IMR ((volatile u32*)(DANUBE_ICU + 0x00C0))
-#define DANUBE_ICU_IM4_IMR_IID (1 << 31)
-#define DANUBE_ICU_IM4_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define DANUBE_ICU_IM4_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define DANUBE_ICU_IM4_IR(value) (1 << (value))
-
-#define DANUBE_ICU_IM5_ISR ((volatile u32*)(DANUBE_ICU + 0x00C8))
-#define DANUBE_ICU_IM5_IER ((volatile u32*)(DANUBE_ICU + 0x00D0))
-#define DANUBE_ICU_IM5_IOSR ((volatile u32*)(DANUBE_ICU + 0x00D8))
-#define DANUBE_ICU_IM5_IRSR ((volatile u32*)(DANUBE_ICU + 0x00E0))
-#define DANUBE_ICU_IM5_IMR ((volatile u32*)(DANUBE_ICU + 0x00E8))
-#define DANUBE_ICU_IM5_IMR_IID (1 << 31)
-#define DANUBE_ICU_IM5_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define DANUBE_ICU_IM5_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define DANUBE_ICU_IM5_IR(value) (1 << (value))
-
-/***Interrupt Vector Value Register***/
-//#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x00f0))
-#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x00EC))
-
-/***Interrupt Vector Value Mask***/
-#define DANUBE_ICU_IM0_VEC_MASK 0x0000001f
-#define DANUBE_ICU_IM1_VEC_MASK 0x000003e0
-#define DANUBE_ICU_IM2_VEC_MASK 0x00007c00
-#define DANUBE_ICU_IM3_VEC_MASK 0x000f8000
-#define DANUBE_ICU_IM4_VEC_MASK 0x01f00000
-
-#define DANUBE_ICU_IM0_ISR_IR(value) (1<<(value))
-#define DANUBE_ICU_IM0_IER_IR(value) (1<<(value))
-#define DANUBE_ICU_IM1_ISR_IR(value) (1<<(value))
-#define DANUBE_ICU_IM1_IER_IR(value) (1<<(value))
-#define DANUBE_ICU_IM2_ISR_IR(value) (1<<(value))
-#define DANUBE_ICU_IM2_IER_IR(value) (1<<(value))
-#define DANUBE_ICU_IM3_ISR_IR(value) (1<<(value))
-#define DANUBE_ICU_IM3_IER_IR(value) (1<<(value))
-#define DANUBE_ICU_IM4_ISR_IR(value) (1<<(value))
-#define DANUBE_ICU_IM4_IER_IR(value) (1<<(value))
-#define DANUBE_ICU_IM5_ISR_IR(value) (1<<(value))
-#define DANUBE_ICU_IM5_IER_IR(value) (1<<(value))
-
-/***DMA Interrupt Mask Value***/
-#define DANUBE_DMA_H_MASK 0x00000fff
-
-/***External Interrupt Control Register***/
-#define DANUBE_ICU_EIU (KSEG1+0x1f101000)
-#define DANUBE_ICU_EIU_EXIN_C ((volatile u32*)(DANUBE_ICU_EIU+ 0x0000))
-#define DANUBE_ICU_EIU_INIC ((volatile u32*)(DANUBE_ICU_EIU+ 0x0004))
-#define DANUBE_ICU_EIU_INC ((volatile u32*)(DANUBE_ICU_EIU+ 0x0008))
-#define DANUBE_ICU_EIU_INEN ((volatile u32*)(DANUBE_ICU_EIU+ 0x000c))
-
-/***********************************************************************/
-/* Module : MPS register address and bits */
-/***********************************************************************/
-
-#define DANUBE_MPS (KSEG1+0x1F107000)
-/***********************************************************************/
-
-#define DANUBE_MPS_CHIPID ((volatile u32*)(DANUBE_MPS + 0x0344))
-#define DANUBE_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define DANUBE_MPS_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define DANUBE_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define DANUBE_MPS_CHIPID_PARTNUM_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
-#define DANUBE_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1))
-#define DANUBE_MPS_CHIPID_MANID_SET(value) (((( 1 << 10) - 1) & (value)) << 1)
-
-/* voice channel 0 ... 3 interrupt enable register */
-#define DANUBE_MPS_VC0ENR ((volatile u32*)(DANUBE_MPS + 0x0000))
-#define DANUBE_MPS_VC1ENR ((volatile u32*)(DANUBE_MPS + 0x0004))
-#define DANUBE_MPS_VC2ENR ((volatile u32*)(DANUBE_MPS + 0x0008))
-#define DANUBE_MPS_VC3ENR ((volatile u32*)(DANUBE_MPS + 0x000C))
-/* voice channel 0 ... 3 interrupt status read register */
-#define DANUBE_MPS_RVC0SR ((volatile u32*)(DANUBE_MPS + 0x0010))
-#define DANUBE_MPS_RVC1SR ((volatile u32*)(DANUBE_MPS + 0x0014))
-#define DANUBE_MPS_RVC2SR ((volatile u32*)(DANUBE_MPS + 0x0018))
-#define DANUBE_MPS_RVC3SR ((volatile u32*)(DANUBE_MPS + 0x001C))
-/* voice channel 0 ... 3 interrupt status set register */
-#define DANUBE_MPS_SVC0SR ((volatile u32*)(DANUBE_MPS + 0x0020))
-#define DANUBE_MPS_SVC1SR ((volatile u32*)(DANUBE_MPS + 0x0024))
-#define DANUBE_MPS_SVC2SR ((volatile u32*)(DANUBE_MPS + 0x0028))
-#define DANUBE_MPS_SVC3SR ((volatile u32*)(DANUBE_MPS + 0x002C))
-/* voice channel 0 ... 3 interrupt status clear register */
-#define DANUBE_MPS_CVC0SR ((volatile u32*)(DANUBE_MPS + 0x0030))
-#define DANUBE_MPS_CVC1SR ((volatile u32*)(DANUBE_MPS + 0x0034))
-#define DANUBE_MPS_CVC2SR ((volatile u32*)(DANUBE_MPS + 0x0038))
-#define DANUBE_MPS_CVC3SR ((volatile u32*)(DANUBE_MPS + 0x003C))
-/* common status 0 and 1 read register */
-#define DANUBE_MPS_RAD0SR ((volatile u32*)(DANUBE_MPS + 0x0040))
-#define DANUBE_MPS_RAD1SR ((volatile u32*)(DANUBE_MPS + 0x0044))
-/* common status 0 and 1 set register */
-#define DANUBE_MPS_SAD0SR ((volatile u32*)(DANUBE_MPS + 0x0048))
-#define DANUBE_MPS_SAD1SR ((volatile u32*)(DANUBE_MPS + 0x004C))
-/* common status 0 and 1 clear register */
-#define DANUBE_MPS_CAD0SR ((volatile u32*)(DANUBE_MPS + 0x0050))
-#define DANUBE_MPS_CAD1SR ((volatile u32*)(DANUBE_MPS + 0x0054))
-/* common status 0 and 1 enable register */
-#define DANUBE_MPS_AD0ENR ((volatile u32*)(DANUBE_MPS + 0x0058))
-#define DANUBE_MPS_AD1ENR ((volatile u32*)(DANUBE_MPS + 0x005C))
-/* notification enable register */
-#define DANUBE_MPS_CPU0_NFER ((volatile u32*)(DANUBE_MPS + 0x0060))
-#define DANUBE_MPS_CPU1_NFER ((volatile u32*)(DANUBE_MPS + 0x0064))
-/* CPU to CPU interrup request register */
-#define DANUBE_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(DANUBE_MPS + 0x0070))
-#define DANUBE_MPS_CPU0_2_CPU1_IER ((volatile u32*)(DANUBE_MPS + 0x0074))
-/* Global interrupt request and request enable register */
-#define DANUBE_MPS_GIRR ((volatile u32*)(DANUBE_MPS + 0x0078))
-#define DANUBE_MPS_GIER ((volatile u32*)(DANUBE_MPS + 0x007C))
-
-#define DANUBE_MPS_SRAM ((volatile u32*)(KSEG1 + 0x1F200000))
-
-#define DANUBE_MPS_VCPU_FW_AD ((volatile u32*)(KSEG1 + 0x1F2001E0))
-
-#define DANUBE_FUSE_BASE_ADDR (KSEG1+0x1F107354)
-
-/************************************************************************/
-/* Module : DEU register address and bits */
-/************************************************************************/
-//#define DANUBE_DEU_BASE_ADDR (0xBE102000)
-#define DANUBE_DEU_BASE_ADDR (KSEG1 + 0x1E103100)
-/* DEU Control Register */
-#define DANUBE_DEU_CLK ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0000))
-#define DANUBE_DEU_ID ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0008))
-
-/* DEU control register */
-#define DANUBE_DES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0010))
-#define DANUBE_DES_IHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0014))
-#define DANUBE_DES_ILR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0018))
-#define DANUBE_DES_K1HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x001C))
-#define DANUBE_DES_K1LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0020))
-#define DANUBE_DES_K3HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0024))
-#define DANUBE_DES_K3LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0028))
-#define DANUBE_DES_IVHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x002C))
-#define DANUBE_DES_IVLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0030))
-#define DANUBE_DES_OHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0040))
-#define DANUBE_DES_OLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
-
-/* AES DEU register */
-#define DANUBE_AES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
-#define DANUBE_AES_ID3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0054))
-#define DANUBE_AES_ID2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0058))
-#define DANUBE_AES_ID1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x005C))
-#define DANUBE_AES_ID0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0060))
-
-/* AES Key register */
-#define DANUBE_AES_K7R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0064))
-#define DANUBE_AES_K6R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0068))
-#define DANUBE_AES_K5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x006C))
-#define DANUBE_AES_K4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0070))
-#define DANUBE_AES_K3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0074))
-#define DANUBE_AES_K2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0078))
-#define DANUBE_AES_K1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x007C))
-#define DANUBE_AES_K0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0080))
-
-/* AES vector register */
-#define DANUBE_AES_IV3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0084))
-#define DANUBE_AES_IV2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0088))
-#define DANUBE_AES_IV1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x008C))
-#define DANUBE_AES_IV0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0090))
-#define DANUBE_AES_0D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0094))
-#define DANUBE_AES_0D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0098))
-#define DANUBE_AES_OD1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x009C))
-#define DANUBE_AES_OD0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00A0))
-
-/* hash control registe */
-#define DANUBE_HASH_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B0))
-#define DANUBE_HASH_MR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B4))
-#define DANUBE_HASH_D1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B8 ))
-#define DANUBE_HASH_D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00BC ))
-#define DANUBE_HASH_D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C0 ))
-#define DANUBE_HASH_D4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C4))
-#define DANUBE_HASH_D5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C8))
-
-#define DANUBE_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00EC))
-
-#define DANUBE_DEU_IRNEN ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00F4))
-#define DANUBE_DEU_IRNCR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00F8))
-#define DANUBE_DEU_IRNICR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00FC))
-
-/************************************************************************/
-/* Module : PPE register address and bits */
-/************************************************************************/
-#define DANUBE_PPE32_BASE 0xBE180000
-#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4))
-#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4))
-#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4))
-#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4))
-
-#define DANUBE_PPE32_SRST (DANUBE_PPE32_BASE + 0x10080)
-
-/*
- * ETOP MDIO Registers
- */
-#define DANUBE_PPE32_ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
-#define DANUBE_PPE32_ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
-#define DANUBE_PPE32_ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
-#define DANUBE_PPE32_ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
-#define DANUBE_PPE32_ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
-#define DANUBE_PPE32_ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
-#define DANUBE_PPE32_ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
-#define DANUBE_PPE32_ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
-
-/* ENET Register */
-#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
-#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
-#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
-
-/* Sharebuff SB RAM2 control data */
-
-#define DANUBE_PPE32_SB2_DATABASE ((DANUBE_PPE32_BASE + (0x8C00 * 4)))
-#define DANUBE_PPE32_SB2_CTRLBASE ((DANUBE_PPE32_BASE + (0x92E0 * 4)))
-/************************************************************************/
-/* Module : PPE register address and bits */
-/************************************************************************/
-#define DANUBE_PPE32_BASE 0xBE180000
-#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4))
-#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4))
-#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4))
-#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4))
-
-/*
- * ETOP MDIO Registers
- */
-#define ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
-#define ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
-#define ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
-#define ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
-#define ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
-#define ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
-#define ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
-#define ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
-#define ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
-#define ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
-#define ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
-#define ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
-#define ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
-#define ENETS_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4)))
-#define ENETS_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4)))
-#define ENETS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4)))
-#define ENETS_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4)))
-#define ENETS_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4)))
-#define ENETS_BUF_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4)))
-#define ENETS_COS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
-#define ENETS_IGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
-#define ENETS_IGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4)))
-#define ENET_MAC_DA0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4)))
-#define ENET_MAC_DA1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4)))
-
-#define ENETF_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0630 * 4)))
-#define ENETF_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0631 * 4)))
-#define ENETF_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0632 * 4)))
-#define ENETF_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0633 * 4)))
-#define ENETF_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0634 * 4)))
-#define ENETF_HFCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0635 * 4)))
-#define ENETF_TXCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0636 * 4)))
-
-#define ENETF_VLCOS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0638 * 4)))
-#define ENETF_VLCOS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0639 * 4)))
-#define ENETF_VLCOS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063A * 4)))
-#define ENETF_VLCOS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063B * 4)))
-#define ENETF_EGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063C * 4)))
-#define ENETF_EGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063D * 4)))
-
-/* ENET Register */
-#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
-#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
-#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
-
-/* Sharebuff SB RAM2 control data */
-
-#define DANUBE_PPE32_SB2_DATABASE ((DANUBE_PPE32_BASE + (0x8C00 * 4)))
-#define DANUBE_PPE32_SB2_CTRLBASE ((DANUBE_PPE32_BASE + (0x92E0 * 4)))
-
-/***********************************************************************/
-/* Module : PCI register address and bits */
-/***********************************************************************/
-#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400)
-#define PCI_CFG_BASE (KSEG1+0x17000000)
-#define PCI_MEM_BASE (KSEG1+0x18000000)
-#define PCI_CS_PR_OFFSET (KSEG1+0x17000000)
-
-/* PCI CONTROLLER REGISTER ADDRESS MAP */
-#define PCI_CR_CLK_CTRL_REG (PCI_CR_PR_OFFSET + 0x0000)
-#define PCI_CR_PCI_ID_REG (PCI_CR_PR_OFFSET + 0x0004)
-#define PCI_CR_SFT_RST_REG (PCI_CR_PR_OFFSET + 0x0010)
-#define PCI_CR_PCI_FPI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0014)
-#define PCI_CR_FCI_PCI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0018)
-#define PCI_CR_FPI_ERR_TAG_REG (PCI_CR_PR_OFFSET + 0x001C)
-#define PCI_CR_PCI_IRR_REG (PCI_CR_PR_OFFSET + 0x0020)
-#define PCI_CR_PCI_IRA_REG (PCI_CR_PR_OFFSET + 0x0024)
-#define PCI_CR_PCI_IRM_REG (PCI_CR_PR_OFFSET + 0x0028)
-#define PCI_CR_PCI_EOI_REG (PCI_CR_PR_OFFSET + 0x002C)
-#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030)
-#define PCI_CR_DV_ID_REG (PCI_CR_PR_OFFSET + 0x0034)
-#define PCI_CR_SUBSYS_ID_REG (PCI_CR_PR_OFFSET + 0x0038)
-#define PCI_CR_PCI_PM_REG (PCI_CR_PR_OFFSET + 0x003C)
-#define PCI_CR_CLASS_CODE1_REG (PCI_CR_PR_OFFSET + 0x0040)
-#define PCI_CR_BAR11MASK_REG (PCI_CR_PR_OFFSET + 0x0044)
-#define PCI_CR_BAR12MASK_REG (PCI_CR_PR_OFFSET + 0x0048)
-#define PCI_CR_BAR13MASK_REG (PCI_CR_PR_OFFSET + 0x004C)
-#define PCI_CR_BAR14MASK_REG (PCI_CR_PR_OFFSET + 0x0050)
-#define PCI_CR_BAR15MASK_REG (PCI_CR_PR_OFFSET + 0x0054)
-#define PCI_CR_BAR16MASK_REG (PCI_CR_PR_OFFSET + 0x0058)
-#define PCI_CR_CIS_PT1_REG (PCI_CR_PR_OFFSET + 0x005C)
-#define PCI_CR_SUBSYS_ID1_REG (PCI_CR_PR_OFFSET + 0x0060)
-#define PCI_CR_PCI_ADDR_MAP11_REG (PCI_CR_PR_OFFSET + 0x0064)
-#define PCI_CR_PCI_ADDR_MAP12_REG (PCI_CR_PR_OFFSET + 0x0068)
-#define PCI_CR_PCI_ADDR_MAP13_REG (PCI_CR_PR_OFFSET + 0x006C)
-#define PCI_CR_PCI_ADDR_MAP14_REG (PCI_CR_PR_OFFSET + 0x0070)
-#define PCI_CR_PCI_ADDR_MAP15_REG (PCI_CR_PR_OFFSET + 0x0074)
-#define PCI_CR_PCI_ADDR_MAP16_REG (PCI_CR_PR_OFFSET + 0x0078)
-#define PCI_CR_FPI_SEG_EN_REG (PCI_CR_PR_OFFSET + 0x007C)
-#define PCI_CR_PC_ARB_REG (PCI_CR_PR_OFFSET + 0x0080)
-#define PCI_CR_BAR21MASK_REG (PCI_CR_PR_OFFSET + 0x0084)
-#define PCI_CR_BAR22MASK_REG (PCI_CR_PR_OFFSET + 0x0088)
-#define PCI_CR_BAR23MASK_REG (PCI_CR_PR_OFFSET + 0x008C)
-#define PCI_CR_BAR24MASK_REG (PCI_CR_PR_OFFSET + 0x0090)
-#define PCI_CR_BAR25MASK_REG (PCI_CR_PR_OFFSET + 0x0094)
-#define PCI_CR_BAR26MASK_REG (PCI_CR_PR_OFFSET + 0x0098)
-#define PCI_CR_CIS_PT2_REG (PCI_CR_PR_OFFSET + 0x009C)
-#define PCI_CR_SUBSYS_ID2_REG (PCI_CR_PR_OFFSET + 0x00A0)
-#define PCI_CR_PCI_ADDR_MAP21_REG (PCI_CR_PR_OFFSET + 0x00A4)
-#define PCI_CR_PCI_ADDR_MAP22_REG (PCI_CR_PR_OFFSET + 0x00A8)
-#define PCI_CR_PCI_ADDR_MAP23_REG (PCI_CR_PR_OFFSET + 0x00AC)
-#define PCI_CR_PCI_ADDR_MAP24_REG (PCI_CR_PR_OFFSET + 0x00B0)
-#define PCI_CR_PCI_ADDR_MAP25_REG (PCI_CR_PR_OFFSET + 0x00B4)
-#define PCI_CR_PCI_ADDR_MAP26_REG (PCI_CR_PR_OFFSET + 0x00B8)
-#define PCI_CR_FPI_ADDR_MASK_REG (PCI_CR_PR_OFFSET + 0x00BC)
-#define PCI_CR_FCI_ADDR_MAP0_REG (PCI_CR_PR_OFFSET + 0x00C0)
-#define PCI_CR_FCI_ADDR_MAP1_REG (PCI_CR_PR_OFFSET + 0x00C4)
-#define PCI_CR_FCI_ADDR_MAP2_REG (PCI_CR_PR_OFFSET + 0x00C8)
-#define PCI_CR_FCI_ADDR_MAP3_REG (PCI_CR_PR_OFFSET + 0x00CC)
-#define PCI_CR_FCI_ADDR_MAP4_REG (PCI_CR_PR_OFFSET + 0x00D0)
-#define PCI_CR_FCI_ADDR_MAP5_REG (PCI_CR_PR_OFFSET + 0x00D4)
-#define PCI_CR_FCI_ADDR_MAP6_REG (PCI_CR_PR_OFFSET + 0x00D8)
-#define PCI_CR_FCI_ADDR_MAP7_REG (PCI_CR_PR_OFFSET + 0x00DC)
-#define PCI_CR_FCI_ADDR_MAP11lo_REG (PCI_CR_PR_OFFSET + 0x00E0)
-#define PCI_CR_FCI_ADDR_MAP11hg_REG (PCI_CR_PR_OFFSET + 0x00E4)
-#define PCI_CR_FCI_BURST_LENGTH_REG (PCI_CR_PR_OFFSET + 0x00E8)
-#define PCI_CR_PCI_SET_SERR_REG (PCI_CR_PR_OFFSET + 0x00EC)
-#define PCI_CR_DMA_FPI_ST_ADDR_REG (PCI_CR_PR_OFFSET + 0x00F0)
-#define PCI_CR_DMA_PCI_ST_ADDR_REG (PCI_CR_PR_OFFSET + 0x00F4)
-#define PCI_CR_DMA_TRAN_CNT_REG (PCI_CR_PR_OFFSET + 0x00F8)
-#define PCI_CR_DMA_TRAN_CTL_REG (PCI_CR_PR_OFFSET + 0x00FC)
-
-/* PCI CONFIGURATION SPACE REGISTER Base Address */
-#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x0800
-#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x1000
-#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x1800
-#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x2000
-#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x2800
-#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x3000
-#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x3800
-#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x4000
-#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x4800
-#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x5000
-#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x5800
-#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x6000
-#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x6800
-#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x7000
-#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x7800
-#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0XF000
-
-/* PCI CONFIGURATION SPACE REGISTER ADDRESS MAP */
-#define PCI_CS_DEV_VEN_ID_REG (PCI_CS_PR_OFFSET + 0x0000)
-#define PCI_CS_STS_CMD_REG (PCI_CS_PR_OFFSET + 0x0004)
-#define PCI_CS_CL_CODE_REVIDG (PCI_CS_PR_OFFSET + 0x0008)
-#define PCI_CS_BST_HT_LT_CLS_REG (PCI_CS_PR_OFFSET + 0x000C)
-#define PCI_CS_BASE_ADDR1_REG (PCI_CS_PR_OFFSET + 0x0010)
-#define PCI_CS_BASE_ADDR2_REG (PCI_CS_PR_OFFSET + 0x0014)
-#define PCI_CS_BASE_ADDR3_REG (PCI_CS_PR_OFFSET + 0x0018)
-#define PCI_CS_BASE_ADDR4_REG (PCI_CS_PR_OFFSET + 0x001C)
-#define PCI_CS_BASE_ADDR5_REG (PCI_CS_PR_OFFSET + 0x0020)
-#define PCI_CS_BASE_ADDR6_REG (PCI_CS_PR_OFFSET + 0x0024)
-#define PCI_CS_CARDBUS_CIS_PT_REG (PCI_CS_PR_OFFSET + 0x0028)
-#define PCI_CS_SUBSYS_VEN_ID_REG (PCI_CS_PR_OFFSET + 0x002C)
-#define PCI_CS_EXROM_BAS_ADDR_REG (PCI_CS_PR_OFFSET + 0x0030)
-#define PCI_CS_RES1_REG (PCI_CS_PR_OFFSET + 0x0034)
-#define PCI_CS_RES2_REG (PCI_CS_PR_OFFSET + 0x0038)
-#define PCI_CS_LAT_GNT_INTR_REG (PCI_CS_PR_OFFSET + 0x003C)
-#define PCI_CS_PM_PT_CPID_REG (PCI_CS_PR_OFFSET + 0x0040)
-#define PCI_CS_DAT_PMCSR_PM_REG (PCI_CS_PR_OFFSET + 0x0044)
-#define PCI_CS_RES3_REG (PCI_CS_PR_OFFSET + 0x0048)
-#define PCI_CS_RES4_REG (PCI_CS_PR_OFFSET + 0x004C)
-#define PCI_CS_ERR_ADDR_PCI_FPI_REG (PCI_CS_PR_OFFSET + 0x0050)
-#define PCI_CS_ERR_ADDR_FPI_PCI_REG (PCI_CS_PR_OFFSET + 0x0054)
-#define PCI_CS_ERR_TAG_FPI_PCI_REG (PCI_CS_PR_OFFSET + 0x0058)
-#define PCI_CS_PC_ARB_REG (PCI_CS_PR_OFFSET + 0x005C)
-#define PCI_CS_FPI_PCI_INT_STS_REG (PCI_CS_PR_OFFSET + 0x0060)
-#define PCI_CS_FPI_PCI_INT_ACK_REG (PCI_CS_PR_OFFSET + 0x0064)
-#define PCI_CS_FPI_PCI_INT_MASK_REG (PCI_CS_PR_OFFSET + 0x0068)
-#define PCI_CS_CARDBUS_CTL_STS_REG (PCI_CS_PR_OFFSET + 0x006C)
-
-// PCI CONTROLLER ADDRESS SPACE
-#define PCI_CA_PR_OFFSET 0xB8000000
-#define PCI_CA_PR_END 0xBBFFFFFF
-
-// PCI CONTROLLER REGISTER ADDRESS MASK
-#define PCI_CR_CLK_CTRL_MSK 0x82000000
-#define PCI_CR_PCI_ID_MSK 0x00000000
-#define PCI_CR_SFT_RST_MSK 0x00000002
-#define PCI_CR_PCI_FPI_ERR_ADDR_MSK 0x00000000
-#define PCI_CR_FCI_PCI_ERR_ADDR_MSK 0x00000000
-#define PCI_CR_FPI_ERR_TAG_MSK 0x00000000
-#define PCI_CR_PCI_IRR_MSK 0x07013B2F
-#define PCI_CR_PCI_IRA_MSK 0x07013B2F
-#define PCI_CR_PCI_IRM_MSK 0x07013B2F
-#define PCI_CR_PCI_EOI_MSK 0x07013B2F
-#define PCI_CR_PCI_MOD_MSK 0x1107070F
-#define PCI_CR_DV_ID_MSK 0x00000000
-#define PCI_CR_SUBSYS_ID_MSK 0x00000000
-#define PCI_CR_PCI_PM_MSK 0x0000001F
-#define PCI_CR_CLASS_CODE1_MSK 0x00000000
-#define PCI_CR_BAR11MASK_MSK 0x8FFFFFF8
-#define PCI_CR_BAR12MASK_MSK 0x80001F08
-#define PCI_CR_BAR13MASK_MSK 0x8FF00008
-#define PCI_CR_BAR14MASK_MSK 0x8FFFFF08
-#define PCI_CR_BAR15MASK_MSK 0x8FFFFF08
-#define PCI_CR_BAR16MASK_MSK 0x8FFFFFF9
-#define PCI_CR_CIS_PT1_MSK 0x03FFFFFF
-#define PCI_CR_SUBSYS_ID1_MSK 0x00000000
-#define PCI_CR_PCI_ADDR_MAP11_MSK 0x7FFF0001
-#define PCI_CR_PCI_ADDR_MAP12_MSK 0x7FFFFF01
-#define PCI_CR_PCI_ADDR_MAP13_MSK 0x7FF00001
-#define PCI_CR_PCI_ADDR_MAP14_MSK 0x7FFFFF01
-#define PCI_CR_PCI_ADDR_MAP15_MSK 0x7FF00001
-#define PCI_CR_PCI_ADDR_MAP16_MSK 0x7FF00001
-#define PCI_CR_FPI_SEG_EN_MSK 0x000003FF
-#define PCI_CR_CLASS_CODE2_MSK 0x00000000
-#define PCI_CR_BAR21MASK_MSK 0x800F0008
-#define PCI_CR_BAR22MASK_MSK 0x807F0008
-#define PCI_CR_BAR23MASK_MSK 0x8FF00008
-#define PCI_CR_BAR24MASK_MSK 0x8FFFFF08
-#define PCI_CR_BAR25MASK_MSK 0x8FFFFF08
-#define PCI_CR_BAR26MASK_MSK 0x8FFFFFF9
-#define PCI_CR_CIS_PT2_MSK 0x03FFFFFF
-#define PCI_CR_SUBSYS_ID2_MSK 0x00000000
-#define PCI_CR_PCI_ADDR_MAP21_MSK 0x7FFE0001
-#define PCI_CR_PCI_ADDR_MAP22_MSK 0x7FFF0001
-#define PCI_CR_PCI_ADDR_MAP23_MSK 0x7FF00001
-#define PCI_CR_PCI_ADDR_MAP24_MSK 0x7FFFFF01
-#define PCI_CR_PCI_ADDR_MAP25_MSK 0x7FFFFF01
-#define PCI_CR_PCI_ADDR_MAP26_MSK 0x7FF00001
-#define PCI_CR_FPI_ADDR_MASK_MSK 0x00070000
-#define PCI_CR_FCI_ADDR_MAP0_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP1_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP2_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP3_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP4_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP5_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP6_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP7_MSK 0xFFF00000
-#define PCI_CR_FCI_ADDR_MAP11lo_MSK 0xFFFF0000
-#define PCI_CR_FCI_ADDR_MAP11hg_MSK 0xFFF00000
-#define PCI_CR_FCI_BURST_LENGTH_MSK 0x00000303
-#define PCI_CR_PCI_SET_SERR_MSK 0x00000001
-#define PCI_CR_DMA_FPI_ST_ADDR_MSK 0xFFFFFFFF
-#define PCI_CR_DMA_PCI_ST_ADDR_MSK 0xFFFFFFFF
-#define PCI_CR_DMA_TRAN_CNT_MSK 0x000003FF
-#define PCI_CR_DMA_TRAN_CTL_MSK 0x00000003
-
-#define INTERNAL_ARB_ENABLE_BIT 0
-#define ARB_SCHEME_BIT 1
-#define PCI_MASTER0_PRIOR_2BITS 2
-#define PCI_MASTER1_PRIOR_2BITS 4
-#define PCI_MASTER2_PRIOR_2BITS 6
-#define PCI_MASTER0_REQ_MASK_2BITS 8
-#define PCI_MASTER1_REQ_MASK_2BITS 10
-#define PCI_MASTER2_REQ_MASK_2BITS 12
-
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
-
-/***********************************************************************/
-#define DANUBE_REG32(addr) *((volatile u32 *)(addr))
-/***********************************************************************/
-#endif //DANUBE_H
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_pmu.h b/target/linux/danube/files/include/asm-mips/danube/danube_pmu.h
deleted file mode 100644
index b404b262c3..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_pmu.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-#ifndef _DANUBE_PMU_H__
-#define _DANUBE_PMU_H__
-
-#define DANUBE_PMU_PWDCR_DMA 0x20
-#define DANUBE_PMU_PWDCR_LED 0x800
-#define DANUBE_PMU_PWDCR_GPT 0x1000
-#define DANUBE_PMU_PWDCR_PPE 0x2000
-#define DANUBE_PMU_PWDCR_FPI 0x4000
-
-void danube_pmu_enable (unsigned int module);
-void danube_pmu_disable (unsigned int module);
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_serial.h b/target/linux/danube/files/include/asm-mips/danube/danube_serial.h
deleted file mode 100644
index 7b7994751b..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_serial.h
+++ /dev/null
@@ -1,194 +0,0 @@
-/* incaAscSio.h - (DANUBE) ASC UART tty driver header */
-
-#ifndef __DANUBE_ASC_H
-#define __DANUBE_ASC_H
-
-/******************************************************************************
-**
-** FILE NAME : serial.c
-** PROJECT : Danube
-** MODULES : ASC/UART
-**
-** DATE : 27 MAR 2006
-** AUTHOR : Liu Peng
-** DESCRIPTION : Asynchronous Serial Channel (ASC/UART) Driver Header File
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 27 MAR 2006 Liu Peng Initiate Version (rev 1.7)
-** 23 OCT 2006 Xu Liang Add GPL header.
-*******************************************************************************/
-
-/* channel operating modes */
-/*#define ASCOPT_CSIZE 0x00000003
-#define ASCOPT_CS7 0x00000001
-#define ASCOPT_CS8 0x00000002
-#define ASCOPT_PARENB 0x00000004
-#define ASCOPT_STOPB 0x00000008
-#define ASCOPT_PARODD 0x00000010
-#define ASCOPT_CREAD 0x00000020
-*/
-#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY 0
-
-#define DANUBEASC_TXFIFO_FL 1
-#define DANUBEASC_RXFIFO_FL 1
-#define DANUBEASC_TXFIFO_FULL 16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define DANUBEASC_IRQ_LINE_ALL 0x0000007f /* all IRQs */
-
-#define DANUBEASC_IRQ_LINE_TIR 0x00000001 /* Tx Int */
-#define DANUBEASC_IRQ_LINE_TBIR 0x00000002 /* Tx Buffer Int */
-#define DANUBEASC_IRQ_LINE_RIR 0x00000004 /* Rx Int */
-#define DANUBEASC_IRQ_LINE_EIR 0x00000008 /* Error Int */
-#define DANUBEASC_IRQ_LINE_ABSTIR 0x00000010 /* Autobaud Start Int */
-#define DANUBEASC_IRQ_LINE_ABDETIP 0x00000020 /* Autobaud Detection Int */
-#define DANUBEASC_IRQ_LINE_SFCIR 0x00000040 /* Software Flow Control Int */
-
-/* interrupt controller access macros */
-#define ASC_INTERRUPTS_ENABLE(X) \
-*((volatile unsigned int*) DANUBE_ICU_IM0_IER) |= X;
-#define ASC_INTERRUPTS_DISABLE(X) \
-*((volatile unsigned int*) DANUBE_ICU_IM0_IER) &= ~X;
-#define ASC_INTERRUPTS_CLEAR(X) \
-*((volatile unsigned int*) DANUBE_ICU_IM0_ISR) = X;
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR 0x00000001
-#define ASCCLC_DISS 0x00000002
-#define ASCCLC_RMCMASK 0x0000FF00
-#define ASCCLC_RMCOFFSET 8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0000000f
-#define ASCCON_M_8ASYNC 0x0
-#define ASCCON_M_8IRDA 0x1
-#define ASCCON_M_7ASYNC 0x2
-#define ASCCON_M_7IRDA 0x3
-#define ASCCON_WLSMASK 0x0000000c
-#define ASCCON_WLSOFFSET 2
-#define ASCCON_WLS_8BIT 0x0
-#define ASCCON_WLS_7BIT 0x1
-#define ASCCON_PEN 0x00000010
-#define ASCCON_ODD 0x00000020
-#define ASCCON_SP 0x00000040
-#define ASCCON_STP 0x00000080
-#define ASCCON_BRS 0x00000100
-#define ASCCON_FDE 0x00000200
-#define ASCCON_ERRCLK 0x00000400
-#define ASCCON_EMMASK 0x00001800
-#define ASCCON_EMOFFSET 11
-#define ASCCON_EM_ECHO_OFF 0x0
-#define ASCCON_EM_ECHO_AB 0x1
-#define ASCCON_EM_ECHO_ON 0x2
-#define ASCCON_LB 0x00002000
-#define ASCCON_ACO 0x00004000
-#define ASCCON_R 0x00008000
-#define ASCCON_PAL 0x00010000
-#define ASCCON_FEN 0x00020000
-#define ASCCON_RUEN 0x00040000
-#define ASCCON_ROEN 0x00080000
-#define ASCCON_TOEN 0x00100000
-#define ASCCON_BEN 0x00200000
-#define ASCCON_TXINV 0x01000000
-#define ASCCON_RXINV 0x02000000
-#define ASCCON_TXMSB 0x04000000
-#define ASCCON_RXMSB 0x08000000
-
-/* STATE register's bits and bitfields */
-#define ASCSTATE_REN 0x00000001
-#define ASCSTATE_PE 0x00010000
-#define ASCSTATE_FE 0x00020000
-#define ASCSTATE_RUE 0x00040000
-#define ASCSTATE_ROE 0x00080000
-#define ASCSTATE_TOE 0x00100000
-#define ASCSTATE_BE 0x00200000
-#define ASCSTATE_TXBVMASK 0x07000000
-#define ASCSTATE_TXBVOFFSET 24
-#define ASCSTATE_TXEOM 0x08000000
-#define ASCSTATE_RXBVMASK 0x70000000
-#define ASCSTATE_RXBVOFFSET 28
-#define ASCSTATE_RXEOM 0x80000000
-#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
-
-/* WHBSTATE register's bits and bitfields */
-#define ASCWHBSTATE_CLRREN 0x00000001
-#define ASCWHBSTATE_SETREN 0x00000002
-#define ASCWHBSTATE_CLRPE 0x00000004
-#define ASCWHBSTATE_CLRFE 0x00000008
-#define ASCWHBSTATE_CLRRUE 0x00000010
-#define ASCWHBSTATE_CLRROE 0x00000020
-#define ASCWHBSTATE_CLRTOE 0x00000040
-#define ASCWHBSTATE_CLRBE 0x00000080
-#define ASCWHBSTATE_SETPE 0x00000100
-#define ASCWHBSTATE_SETFE 0x00000200
-#define ASCWHBSTATE_SETRUE 0x00000400
-#define ASCWHBSTATE_SETROE 0x00000800
-#define ASCWHBSTATE_SETTOE 0x00001000
-#define ASCWHBSTATE_SETBE 0x00002000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN 0x0001
-#define ASCABCON_AUREN 0x0002
-#define ASCABCON_ABSTEN 0x0004
-#define ASCABCON_ABDETEN 0x0008
-#define ASCABCON_FCDETEN 0x0010
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK 0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_CLRABEN 0x0001
-#define ASCWHBABCON_SETABEN 0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET 0x0001
-#define ASCABSTAT_FCCDET 0x0002
-#define ASCABSTAT_SCSDET 0x0004
-#define ASCABSTAT_SCCDET 0x0008
-#define ASCABSTAT_DETWAIT 0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET 0x0001
-#define ASCWHBABSTAT_SETFCSDET 0x0002
-#define ASCWHBABSTAT_CLRFCCDET 0x0004
-#define ASCWHBABSTAT_SETFCCDET 0x0008
-#define ASCWHBABSTAT_CLRSCSDET 0x0010
-#define ASCWHBABSTAT_SETSCSDET 0x0020
-#define ASCWHBABSTAT_CLRSCCDET 0x0040
-#define ASCWHBABSTAT_SETSCCDET 0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFIFO1 0x00000400
-#define ASCTXFCON_TXFEN 0x0001
-#define ASCTXFCON_TXFFLU 0x0002
-#define ASCTXFCON_TXFITLMASK 0x3F00
-#define ASCTXFCON_TXFITLOFF 8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFIFO1 0x00000400
-#define ASCRXFCON_RXFEN 0x0001
-#define ASCRXFCON_RXFFLU 0x0002
-#define ASCRXFCON_RXFITLMASK 0x3F00
-#define ASCRXFCON_RXFITLOFF 8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK 0x003F
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-#endif /* __DANUBE_ASC_H */
diff --git a/target/linux/danube/files/include/asm-mips/danube/danube_wdt.h b/target/linux/danube/files/include/asm-mips/danube/danube_wdt.h
deleted file mode 100644
index 1c31fc9ee2..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/danube_wdt.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2005 infineon
- * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
- *
- */
-
-#ifndef DANUBE_WDT_H
-#define DANUBE_WDT_H
-
-/* Danube wdt ioctl control */
-#define DANUBE_WDT_IOC_MAGIC 0xc0
-#define DANUBE_WDT_IOC_START _IOW(DANUBE_WDT_IOC_MAGIC, 0, int)
-#define DANUBE_WDT_IOC_STOP _IO(DANUBE_WDT_IOC_MAGIC, 1)
-#define DANUBE_WDT_IOC_PING _IO(DANUBE_WDT_IOC_MAGIC, 2)
-#define DANUBE_WDT_IOC_SET_PWL _IOW(DANUBE_WDT_IOC_MAGIC, 3, int)
-#define DANUBE_WDT_IOC_SET_DSEN _IOW(DANUBE_WDT_IOC_MAGIC, 4, int)
-#define DANUBE_WDT_IOC_SET_LPEN _IOW(DANUBE_WDT_IOC_MAGIC, 5, int)
-#define DANUBE_WDT_IOC_GET_STATUS _IOR(DANUBE_WDT_IOC_MAGIC, 6, int)
-#define DANUBE_WDT_IOC_SET_CLKDIV _IOW(DANUBE_WDT_IOC_MAGIC, 7, int)
-
-/* password 1 and 2 */
-#define DANUBE_WDT_PW1 0x000000BE
-#define DANUBE_WDT_PW2 0x000000DC
-
-#define DANUBE_WDT_CLKDIV0_VAL 1
-#define DANUBE_WDT_CLKDIV1_VAL 64
-#define DANUBE_WDT_CLKDIV2_VAL 4096
-#define DANUBE_WDT_CLKDIV3_VAL 262144
-#define DANUBE_WDT_CLKDIV0 0
-#define DANUBE_WDT_CLKDIV1 1
-#define DANUBE_WDT_CLKDIV2 2
-#define DANUBE_WDT_CLKDIV3 3
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h b/target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h
deleted file mode 100644
index 5bd788fff6..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/ifx_peripheral_definitions.h
+++ /dev/null
@@ -1,119 +0,0 @@
-//*************************************************************************
-//* Summary of definitions which are used in each peripheral *
-//*************************************************************************
-
-#ifndef peripheral_definitions_h
-#define peripheral_definitions_h
-
-////#include "cpu.h"
-//
-///* These files have to be included by each peripheral */
-//#include <sysdefs.h>
-//#include <excep.h>
-//#include <cpusubsys.h>
-//#include <sys_api.h>
-//#include <mips.h>
-//#include "SRAM_address_map.h"
-//
-///* common header files for all CPU's */
-//#include "iiu.h"
-//#include "bcu.h"
-//#include "FPI_address_map.h"
-//#include "direct_interrupts.h"
-
-/////////////////////////////////////////////////////////////////////////
-
-//extern int _clz();
-//extern void _nop();
-//extern void _sleep();
-//extern void sys_enable_int();
-
-typedef unsigned char UINT8;
-typedef signed char INT8;
-typedef unsigned short UINT16;
-typedef signed short INT16;
-typedef unsigned int UINT32;
-typedef signed int INT32;
-typedef unsigned long long UINT64;
-typedef signed long long INT64;
-
-#define REG8( addr ) (*(volatile UINT8 *) (addr))
-#define REG16( addr ) (*(volatile UINT16 *)(addr))
-#define REG32( addr ) (*(volatile UINT32 *)(addr))
-#define REG64( addr ) (*(volatile UINT64 *)(addr))
-
-/* define routine to set FPI access in Supervisor Mode */
-#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG)
-/* Supervisor mode ends, following functions will be done in User mode */
-#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm
-/* enable all Interrupts in IIU */
-//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask
-///* get all high priority interrupt bits in IIU */
-//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED)
-///* signal ends of interrupt to IIU */
-//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit
-///* force IIU interrupt register */
-//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data
-///* get all bits of interrupt register */
-//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR)
-/* insert a NOP instruction */
-#define NOP _nop()
-/* CPU goes to power down mode until interrupt occurs */
-#define IFX_CPU_SLEEP _sleep()
-/* enable all interrupts to CPU */
-#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int()
-/* get all low priority interrupt bits in peripheral */
-#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg)
-/* clear low priority interrupt bit in peripheral */
-#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit
-/* write FPI bus */
-#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data
-#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data
-#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data
-/* read FPI bus */
-#define READ_FPI_BYTE(addr) REG8(addr)
-#define READ_FPI_16BIT(addr) REG16(addr)
-#define READ_FPI_32BIT(addr) REG32(addr)
-/* write peripheral register */
-#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
-#else //not CONFIG_CPU_LITTLE_ENDIAN
-#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
-#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
-#endif //CONFIG_CPU_LITTLE_ENDIAN
-
-/* read peripheral register */
-#define READ_PERIPHERAL_REGISTER(addr) REG32(addr)
-
-/* read/modify(or)/write peripheral register */
-#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
-/* read/modify(and)/write peripheral register */
-#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data
-
-/* CPU-independent mnemonic constants */
-/* CLC register bits */
-#define IFX_CLC_ENABLE 0x00000000
-#define IFX_CLC_DISABLE 0x00000001
-#define IFX_CLC_DISABLE_STATUS 0x00000002
-#define IFX_CLC_SUSPEND_ENABLE 0x00000004
-#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008
-#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010
-#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
-#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00
-#define IFX_CLC_RUN_DIVIDER_OFFSET 8
-#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16
-#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
-#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
-
-/* number of cycles to wait for interrupt service routine to be called */
-#define WAIT_CYCLES 50
-
-#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h b/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h
deleted file mode 100644
index e541c8ec3b..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * ifx_ssc.h defines some data sructures used in ifx_ssc.c
- *
- * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
- *
- *
- */
-
-#ifndef __IFX_SSC_H
-#define __IFX_SSC_H
-#ifdef __KERNEL__
-#include <asm/danube/ifx_ssc_defines.h>
-#endif //__KERNEL__
-
-#define PORT_CNT 1 // assume default value
-
-/* symbolic constants to be used in SSC routines */
-
-// ### TO DO: bad performance
-#define IFX_SSC_TXFIFO_ITL 1
-#define IFX_SSC_RXFIFO_ITL 1
-
-struct ifx_ssc_statistics {
- unsigned int abortErr; /* abort error */
- unsigned int modeErr; /* master/slave mode error */
- unsigned int txOvErr; /* TX Overflow error */
- unsigned int txUnErr; /* TX Underrun error */
- unsigned int rxOvErr; /* RX Overflow error */
- unsigned int rxUnErr; /* RX Underrun error */
- unsigned int rxBytes;
- unsigned int txBytes;
-};
-
-struct ifx_ssc_hwopts {
- unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */
- unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */
- unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */
- unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */
- unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */
- unsigned int echoMode:1; /* Echo mode */
- unsigned int loopBack:1; /* Loopback mode */
- unsigned int idleValue:1; /* Idle value */
- unsigned int clockPolarity:1; /* Idle clock is high or low */
- unsigned int clockPhase:1; /* Tx on trailing or leading edge */
- unsigned int headingControl:1; /* LSB first or MSB first */
- unsigned int dataWidth:6; /* from 2 up to 32 bits */
- unsigned int masterSelect:1; /* Master or Slave mode */
- unsigned int modeRxTx:2; /* rx/tx mode */
- unsigned int gpoCs:8; /* choose outputs to use for chip select */
- unsigned int gpoInv:8; /* invert GPO outputs */
-};
-
-struct ifx_ssc_frm_opts {
- bool FrameEnable; // SFCON.SFEN
- unsigned int DataLength; // SFCON.DLEN
- unsigned int PauseLength; // SFCON.PLEN
- unsigned int IdleData; // SFCON.IDAT
- unsigned int IdleClock; // SFCON.ICLK
- bool StopAfterPause; // SFCON.STOP
-};
-
-struct ifx_ssc_frm_status {
- bool DataBusy; // SFSTAT.DBSY
- bool PauseBusy; // SFSTAT.PBSY
- unsigned int DataCount; // SFSTAT.DCNT
- unsigned int PauseCount; // SFSTAT.PCNT
- bool EnIntAfterData; // SFCON.IBEN
- bool EnIntAfterPause; // SFCON.IAEN
-};
-
-typedef struct {
- char *buf;
- size_t len;
-} ifx_ssc_buf_item_t;
-
-// data structures for batch execution
-typedef union {
- struct {
- bool save_options;
- } init;
- ifx_ssc_buf_item_t read;
- ifx_ssc_buf_item_t write;
- ifx_ssc_buf_item_t rd_wr;
- unsigned int set_baudrate;
- struct ifx_ssc_frm_opts set_frm;
- unsigned int set_gpo;
- struct ifx_ssc_hwopts set_hwopts;
-} ifx_ssc_batch_cmd_param;
-
-struct ifx_ssc_batch_list {
- unsigned int cmd;
- ifx_ssc_batch_cmd_param cmd_param;
- struct ifx_ssc_batch_list *next;
-};
-
-#ifdef __KERNEL__
-#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
-
-struct ifx_ssc_port {
- unsigned long mapbase;
- struct ifx_ssc_hwopts opts;
- struct ifx_ssc_statistics stats;
- struct ifx_ssc_frm_status frm_status;
- struct ifx_ssc_frm_opts frm_opts;
- /* wait queue for ifx_ssc_read() */
- wait_queue_head_t rwait, pwait;
- int port_nr;
- char port_is_open; /* exclusive open - boolean */
-// int no_of_bits; /* number of _valid_ bits */
-// int elem_size; /* shift for element (no of bytes)*/
- /* buffer and pointers to the read/write position */
- char *rxbuf; /* buffer for RX */
- char *rxbuf_end; /* buffer end pointer for RX */
- volatile char *rxbuf_ptr; /* buffer write pointer for RX */
- char *txbuf; /* buffer for TX */
- char *txbuf_end; /* buffer end pointer for TX */
- volatile char *txbuf_ptr; /* buffer read pointer for TX */
- unsigned int baud;
- /* each channel has its own interrupts */
- /* (transmit/receive/error/frame) */
- unsigned int txirq, rxirq, errirq, frmirq;
-};
-/* default values for SSC configuration */
-// values of CON
-#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */
-#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */
-#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */
-#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */
-#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */
-#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */
-#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */
-#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */
-#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
-#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
-#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX
-// other values
-#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */
-#ifdef CONFIG_USE_EMULATOR
-#define IFX_SSC_DEF_BAUDRATE 10000
-#else
-#define IFX_SSC_DEF_BAUDRATE 2000000
-#endif
-#define IFX_SSC_DEF_RMC 0x10
-
-#define IFX_SSC_DEF_TXFIFO_FL 8
-#define IFX_SSC_DEF_RXFIFO_FL 1
-
-#if 1 //TODO
-#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */
-#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */
-#else
-#error "what is ur Chip Select???"
-#endif
-#define IFX_SSC_DEF_SFCON 0 /* no serial framing */
-#if 0
-#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
- IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
-#endif
-#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
- IFX_SSC_R_BIT | IFX_SSC_E_BIT
-#endif /* __KERNEL__ */
-
-// batch execution commands
-#define IFX_SSC_BATCH_CMD_INIT 1
-#define IFX_SSC_BATCH_CMD_READ 2
-#define IFX_SSC_BATCH_CMD_WRITE 3
-#define IFX_SSC_BATCH_CMD_RD_WR 4
-#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
-#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6
-#define IFX_SSC_BATCH_CMD_SET_FRM 7
-#define IFX_SSC_BATCH_CMD_SET_GPO 8
-#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9
-//#define IFX_SSC_BATCH_CMD_
-//#define IFX_SSC_BATCH_CMD_
-#define IFX_SSC_BATCH_CMD_END_EXEC 0
-
-/* Macros to configure SSC hardware */
-/* headingControl: */
-#define IFX_SSC_LSB_FIRST 0
-#define IFX_SSC_MSB_FIRST 1
-/* dataWidth: */
-#define IFX_SSC_MIN_DATA_WIDTH 2
-#define IFX_SSC_MAX_DATA_WIDTH 32
-/* master/slave mode select */
-#define IFX_SSC_MASTER_MODE 1
-#define IFX_SSC_SLAVE_MODE 0
-/* rx/tx mode */
-// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
-#define IFX_SSC_MODE_RXTX 0
-#define IFX_SSC_MODE_RX 1
-#define IFX_SSC_MODE_TX 2
-#define IFX_SSC_MODE_OFF 3
-#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
-
-/* GPO values */
-#define IFX_SSC_MAX_GPO_OUT 7
-
-#define IFX_SSC_RXREQ_BLOCK_SIZE 32768
-
-/***********************/
-/* defines for ioctl's */
-/***********************/
-#define IFX_SSC_IOCTL_MAGIC 'S'
-/* read out the statistics */
-#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
-/* clear the statistics */
-#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
-/* set the baudrate */
-#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
-/* get the current baudrate */
-#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
-/* set hardware options */
-#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
-/* get the current hardware options */
-#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
-/* set transmission mode */
-#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
-/* get the current transmission mode */
-#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
-/* abort transmission */
-#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
-#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
-
-/* set general purpose outputs */
-#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
-/* clear general purpose outputs */
-#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
-/* get general purpose outputs */
-#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
-
-/*** serial framing ***/
-/* get status of serial framing */
-#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
-/* get counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
-/* set counter reload values and control bits */
-#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
-
-/*** batch execution ***/
-/* do batch execution */
-#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
-
-#ifdef __KERNEL__
-// routines from ifx_ssc.c
-// ### TO DO
-/* kernel interface for read and write */
-ssize_t ifx_ssc_kread (int, char *, size_t);
-ssize_t ifx_ssc_kwrite (int, const char *, size_t);
-
-#ifdef CONFIG_IFX_VP_KERNEL_TEST
-void ifx_ssc_tc (void);
-#endif // CONFIG_IFX_VP_KERNEL_TEST
-
-#endif //__KERNEL__
-#endif // __IFX_SSC_H
diff --git a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h b/target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h
deleted file mode 100644
index 805d48ad84..0000000000
--- a/target/linux/danube/files/include/asm-mips/danube/ifx_ssc_defines.h
+++ /dev/null
@@ -1,547 +0,0 @@
-#ifndef IFX_SSC_DEFINES_H
-#define IFX_SSC_DEFINES_H
-
-#include "ifx_peripheral_definitions.h"
-
-/* maximum SSC FIFO size */
-#define IFX_SSC_MAX_FIFO_SIZE 32
-
-/* register map of SSC */
-
-/* address of the Clock Control Register of the SSC */
-#define IFX_SSC_CLC 0x00000000
-/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0
- bit 1 is hardware modified*/
-#define IFX_SSC_CLC_readmask 0x00FFFFEF
-#define IFX_SSC_CLC_writemask 0x00FFFF3D
-#define IFX_SSC_CLC_hwmask 0x00000002
-#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
-
-/* address of Port Input Select Register of the SSC */
-#define IFX_SSC_PISEL 0x00000004
-/* IFX_SSC_PISEL register is significant in lowest three bits only */
-#define IFX_SSC_PISEL_readmask 0x00000007
-#define IFX_SSC_PISEL_writemask 0x00000007
-#define IFX_SSC_PISEL_hwmask 0x00000000
-#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
-
-/* address of Identification Register of the SSC */
-#define IFX_SSC_ID 0x00000008
-/* IFX_SSC_ID register is significant in no bit */
-#define IFX_SSC_ID_readmask 0x0000FF3F
-#define IFX_SSC_ID_writemask 0x00000000
-#define IFX_SSC_ID_hwmask 0x00000000
-#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
-
-/* address of the Control Register of the SSC */
-#define IFX_SSC_CON 0x00000010
-/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
-#define IFX_SSC_CON_readmask 0x01DF1FFF
-#define IFX_SSC_CON_writemask 0x01DF1FFF
-#define IFX_SSC_CON_hwmask 0x00000000
-#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
-
-/* address of the Status Register of the SSC */
-#define IFX_SSC_STATE 0x00000014
-/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
- all bits except 1:0 are hardware modified */
-#define IFX_SSC_STATE_readmask 0x771F3F87
-#define IFX_SSC_STATE_writemask 0x00000000
-#define IFX_SSC_STATE_hwmask 0x771F3F84
-#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
-
-/* address of the Write Hardware Modified Control Register Bits of the SSC */
-#define IFX_SSC_WHBSTATE 0x00000018
-/* IFX_SSC_WHBSTATE register is write only */
-#define IFX_SSC_WHBSTATE_readmask 0x00000000
-#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
-#define IFX_SSC_WHBSTATE_hwmask 0x00000000
-#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
-
-/* address of the Baudrate Timer Reload Register of the SSC */
-#define IFX_SSC_BR 0x00000040
-/* IFX_SSC_BR register is significant in bit 15 downto 0*/
-#define IFX_SSC_BR_readmask 0x0000FFFF
-#define IFX_SSC_BR_writemask 0x0000FFFF
-#define IFX_SSC_BR_hwmask 0x00000000
-#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
-
-/* address of the Baudrate Timer Status Register of the SSC */
-#define IFX_SSC_BRSTAT 0x00000044
-/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/
-#define IFX_SSC_BRSTAT_readmask 0x0000FFFF
-#define IFX_SSC_BRSTAT_writemask 0x00000000
-#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF
-#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
-
-/* address of the Transmitter Buffer Register of the SSC */
-#define IFX_SSC_TB 0x00000020
-/* IFX_SSC_TB register is significant in bit 31 downto 0*/
-#define IFX_SSC_TB_readmask 0xFFFFFFFF
-#define IFX_SSC_TB_writemask 0xFFFFFFFF
-#define IFX_SSC_TB_hwmask 0x00000000
-#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
-
-/* address of the Reciver Buffer Register of the SSC */
-#define IFX_SSC_RB 0x00000024
-/* IFX_SSC_RB register is significant in no bits*/
-#define IFX_SSC_RB_readmask 0xFFFFFFFF
-#define IFX_SSC_RB_writemask 0x00000000
-#define IFX_SSC_RB_hwmask 0xFFFFFFFF
-#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
-
-/* address of the Receive FIFO Control Register of the SSC */
-#define IFX_SSC_RXFCON 0x00000030
-/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_RXFCON_readmask 0x00003F03
-#define IFX_SSC_RXFCON_writemask 0x00003F03
-#define IFX_SSC_RXFCON_hwmask 0x00000000
-#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
-
-/* address of the Transmit FIFO Control Register of the SSC */
-#define IFX_SSC_TXFCON 0x00000034
-/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
-#define IFX_SSC_TXFCON_readmask 0x00003F03
-#define IFX_SSC_TXFCON_writemask 0x00003F03
-#define IFX_SSC_TXFCON_hwmask 0x00000000
-#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
-
-/* address of the FIFO Status Register of the SSC */
-#define IFX_SSC_FSTAT 0x00000038
-/* IFX_SSC_FSTAT register is significant in no bit*/
-#define IFX_SSC_FSTAT_readmask 0x00003F3F
-#define IFX_SSC_FSTAT_writemask 0x00000000
-#define IFX_SSC_FSTAT_hwmask 0x00003F3F
-#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
-
-/* address of the Data Frame Control register of the SSC */
-#define IFX_SSC_SFCON 0x00000060
-#define IFX_SSC_SFCON_readmask 0xFFDFFFFD
-#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
-#define IFX_SSC_SFCON_hwmask 0x00000000
-#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
-
-/* address of the Data Frame Status register of the SSC */
-#define IFX_SSC_SFSTAT 0x00000064
-#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3
-#define IFX_SSC_SFSTAT_writemask 0x00000000
-#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3
-#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
-
-/* address of the General Purpose Output Control register of the SSC */
-#define IFX_SSC_GPOCON 0x00000070
-#define IFX_SSC_GPOCON_readmask 0x0000FFFF
-#define IFX_SSC_GPOCON_writemask 0x0000FFFF
-#define IFX_SSC_GPOCON_hwmask 0x00000000
-#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
-
-/* address of the General Purpose Output Status register of the SSC */
-#define IFX_SSC_GPOSTAT 0x00000074
-#define IFX_SSC_GPOSTAT_readmask 0x000000FF
-#define IFX_SSC_GPOSTAT_writemask 0x00000000
-#define IFX_SSC_GPOSTAT_hwmask 0x00000000
-#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
-
-/* address of the Force GPO Status register of the SSC */
-#define IFX_SSC_WHBGPOSTAT 0x00000078
-#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000
-#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
-#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000
-#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
-
-/* address of the Receive Request Register of the SSC */
-#define IFX_SSC_RXREQ 0x00000080
-#define IFX_SSC_RXREQ_readmask 0x0000FFFF
-#define IFX_SSC_RXREQ_writemask 0x0000FFFF
-#define IFX_SSC_RXREQ_hwmask 0x00000000
-#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
-
-/* address of the Receive Count Register of the SSC */
-#define IFX_SSC_RXCNT 0x00000084
-#define IFX_SSC_RXCNT_readmask 0x0000FFFF
-#define IFX_SSC_RXCNT_writemask 0x00000000
-#define IFX_SSC_RXCNT_hwmask 0x0000FFFF
-#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
-
-/* address of the DMA Configuration Register of the SSC */
-#define IFX_SSC_DMACON 0x000000EC
-#define IFX_SSC_DMACON_readmask 0x0000FFFF
-#define IFX_SSC_DMACON_writemask 0x00000000
-#define IFX_SSC_DMACON_hwmask 0x0000FFFF
-#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
-
-//------------------------------------------------------
-// interrupt register for enabling interrupts, mask register of irq_reg
-#define IFX_SSC_IRN_EN 0xF4
-// read/write
-#define IFX_SSC_IRN_EN_readmask 0x0000000F
-#define IFX_SSC_IRN_EN_writemask 0x0000000F
-#define IFX_SSC_IRN_EN_hwmask 0x00000000
-#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
-
-// interrupt register for accessing interrupts
-#define IFX_SSC_IRN_CR 0xF8
-// read/write
-#define IFX_SSC_IRN_CR_readmask 0x0000000F
-#define IFX_SSC_IRN_CR_writemask 0x0000000F
-#define IFX_SSC_IRN_CR_hwmask 0x0000000F
-#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
-
-// interrupt register for stimulating interrupts
-#define IFX_SSC_IRN_ICR 0xFC
-// read/write
-#define IFX_SSC_IRN_ICR_readmask 0x0000000F
-#define IFX_SSC_IRN_ICR_writemask 0x0000000F
-#define IFX_SSC_IRN_ICR_hwmask 0x00000000
-#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
-
-//---------------------------------------------------------------------
-// Number of IRQs and bitposition of IRQ
-#define IFX_SSC_NUM_IRQ 4
-#define IFX_SSC_T_BIT 0x00000001
-#define IFX_SSC_R_BIT 0x00000002
-#define IFX_SSC_E_BIT 0x00000004
-#define IFX_SSC_F_BIT 0x00000008
-
-/* bit masks for SSC registers */
-
-/* ID register */
-#define IFX_SSC_PERID_REV_MASK 0x0000001F
-#define IFX_SSC_PERID_CFG_MASK 0x00000020
-#define IFX_SSC_PERID_ID_MASK 0x0000FF00
-#define IFX_SSC_PERID_REV_OFFSET 0
-#define IFX_SSC_PERID_CFG_OFFSET 5
-#define IFX_SSC_PERID_ID_OFFSET 8
-#define IFX_SSC_PERID_ID 0x45
-#define IFX_SSC_PERID_DMA_ON 0x00000020
-#define IFX_SSC_PERID_RXFS_MASK 0x003F0000
-#define IFX_SSC_PERID_RXFS_OFFSET 16
-#define IFX_SSC_PERID_TXFS_MASK 0x3F000000
-#define IFX_SSC_PERID_TXFS_OFFSET 24
-
-/* PISEL register */
-#define IFX_SSC_PISEL_MASTER_IN_A 0x0000
-#define IFX_SSC_PISEL_MASTER_IN_B 0x0001
-#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000
-#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002
-#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000
-#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004
-
-/* IFX_SSC_CON register */
-#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000
-#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000
-#define IFX_SSC_CON_IDLE_HIGH 0x00800000
-#define IFX_SSC_CON_IDLE_LOW 0x00000000
-#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000
-#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
-#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16
-#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000
-#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
-
-#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000
-#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000
-
-#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000
-#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000
-#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800
-#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000
-#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400
-#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000
-#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200
-#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000
-#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100
-#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000
-#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00
-#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000
-
-#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080
-#define IFX_SSC_CON_NO_LOOPBACK 0x00000000
-#define IFX_SSC_CON_HALF_DUPLEX 0x00000080
-#define IFX_SSC_CON_FULL_DUPLEX 0x00000000
-#define IFX_SSC_CON_CLOCK_FALL 0x00000040
-#define IFX_SSC_CON_CLOCK_RISE 0x00000000
-#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000
-#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020
-#define IFX_SSC_CON_MSB_FIRST 0x00000010
-#define IFX_SSC_CON_LSB_FIRST 0x00000000
-#define IFX_SSC_CON_ENABLE_CSB 0x00000008
-#define IFX_SSC_CON_DISABLE_CSB 0x00000000
-#define IFX_SSC_CON_INVERT_CSB 0x00000004
-#define IFX_SSC_CON_TRUE_CSB 0x00000000
-#define IFX_SSC_CON_RX_OFF 0x00000002
-#define IFX_SSC_CON_RX_ON 0x00000000
-#define IFX_SSC_CON_TX_OFF 0x00000001
-#define IFX_SSC_CON_TX_ON 0x00000000
-
-/* IFX_SSC_STATE register */
-#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
-#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000
-#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
-#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000
-#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
-#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16
-#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000
-#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
-#define IFX_SSC_STATE_BUSY 0x00002000
-#define IFX_SSC_STATE_RX_UFL 0x00001000
-#define IFX_SSC_STATE_TX_UFL 0x00000800
-#define IFX_SSC_STATE_ABORT_ERR 0x00000400
-#define IFX_SSC_STATE_RX_OFL 0x00000200
-#define IFX_SSC_STATE_TX_OFL 0x00000100
-#define IFX_SSC_STATE_MODE_ERR 0x00000080
-#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004
-#define IFX_SSC_STATE_IS_MASTER 0x00000002
-#define IFX_SSC_STATE_IS_ENABLED 0x00000001
-
-/* WHBSTATE register */
-#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001
-#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
-#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001
-
-#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002
-#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002
-#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002
-
-#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004
-#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004
-
-#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008
-#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008
-
-#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010
-#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020
-
-#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040
-#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080
-
-#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100
-#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200
-#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400
-#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800
-#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000
-#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000
-#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000
-#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000
-#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50
-#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0
-
-/* BR register */
-#define IFX_SSC_BR_BAUDRATE_OFFSET 0
-#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF
-
-/* BR_STAT register */
-#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0
-#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF
-
-/* TB register */
-#define IFX_SSC_TB_DATA_OFFSET 0
-#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF
-
-/* RB register */
-#define IFX_SSC_RB_DATA_OFFSET 0
-#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF
-
-/* RXFCON and TXFCON registers */
-#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000
-#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001
-#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002
-#define IFX_SSC_XFCON_ITL_MASK 0x00003F00
-#define IFX_SSC_XFCON_ITL_OFFSET 8
-
-/* FSTAT register */
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0
-#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8
-#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00
-
-/* GPOCON register */
-#define IFX_SSC_GPOCON_INVOUT0_POS 0
-#define IFX_SSC_GPOCON_INV_OUT0 0x00000001
-#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000
-#define IFX_SSC_GPOCON_INVOUT1_POS 1
-#define IFX_SSC_GPOCON_INV_OUT1 0x00000002
-#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000
-#define IFX_SSC_GPOCON_INVOUT2_POS 2
-#define IFX_SSC_GPOCON_INV_OUT2 0x00000003
-#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000
-#define IFX_SSC_GPOCON_INVOUT3_POS 3
-#define IFX_SSC_GPOCON_INV_OUT3 0x00000008
-#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000
-#define IFX_SSC_GPOCON_INVOUT4_POS 4
-#define IFX_SSC_GPOCON_INV_OUT4 0x00000010
-#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000
-#define IFX_SSC_GPOCON_INVOUT5_POS 5
-#define IFX_SSC_GPOCON_INV_OUT5 0x00000020
-#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000
-#define IFX_SSC_GPOCON_INVOUT6_POS 6
-#define IFX_SSC_GPOCON_INV_OUT6 0x00000040
-#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000
-#define IFX_SSC_GPOCON_INVOUT7_POS 7
-#define IFX_SSC_GPOCON_INV_OUT7 0x00000080
-#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000
-#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF
-#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000
-
-#define IFX_SSC_GPOCON_ISCSB0_POS 8
-#define IFX_SSC_GPOCON_IS_CSB0 0x00000100
-#define IFX_SSC_GPOCON_IS_GPO0 0x00000000
-#define IFX_SSC_GPOCON_ISCSB1_POS 9
-#define IFX_SSC_GPOCON_IS_CSB1 0x00000200
-#define IFX_SSC_GPOCON_IS_GPO1 0x00000000
-#define IFX_SSC_GPOCON_ISCSB2_POS 10
-#define IFX_SSC_GPOCON_IS_CSB2 0x00000400
-#define IFX_SSC_GPOCON_IS_GPO2 0x00000000
-#define IFX_SSC_GPOCON_ISCSB3_POS 11
-#define IFX_SSC_GPOCON_IS_CSB3 0x00000800
-#define IFX_SSC_GPOCON_IS_GPO3 0x00000000
-#define IFX_SSC_GPOCON_ISCSB4_POS 12
-#define IFX_SSC_GPOCON_IS_CSB4 0x00001000
-#define IFX_SSC_GPOCON_IS_GPO4 0x00000000
-#define IFX_SSC_GPOCON_ISCSB5_POS 13
-#define IFX_SSC_GPOCON_IS_CSB5 0x00002000
-#define IFX_SSC_GPOCON_IS_GPO5 0x00000000
-#define IFX_SSC_GPOCON_ISCSB6_POS 14
-#define IFX_SSC_GPOCON_IS_CSB6 0x00004000
-#define IFX_SSC_GPOCON_IS_GPO6 0x00000000
-#define IFX_SSC_GPOCON_ISCSB7_POS 15
-#define IFX_SSC_GPOCON_IS_CSB7 0x00008000
-#define IFX_SSC_GPOCON_IS_GPO7 0x00000000
-#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00
-#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000
-
-/* GPOSTAT register */
-#define IFX_SSC_GPOSTAT_OUT0 0x00000001
-#define IFX_SSC_GPOSTAT_OUT1 0x00000002
-#define IFX_SSC_GPOSTAT_OUT2 0x00000004
-#define IFX_SSC_GPOSTAT_OUT3 0x00000008
-#define IFX_SSC_GPOSTAT_OUT4 0x00000010
-#define IFX_SSC_GPOSTAT_OUT5 0x00000020
-#define IFX_SSC_GPOSTAT_OUT6 0x00000040
-#define IFX_SSC_GPOSTAT_OUT7 0x00000080
-#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF
-
-/* WHBGPOSTAT register */
-#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001
-#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002
-#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004
-#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008
-#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010
-#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020
-#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040
-#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080
-#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF
-
-#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0
-#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1
-#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2
-#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3
-#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4
-#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5
-#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6
-#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7
-
-#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8
-#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100
-#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9
-#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200
-#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10
-#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400
-#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11
-#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800
-#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12
-#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000
-#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13
-#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000
-#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14
-#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000
-#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15
-#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000
-#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00
-
-/* SFCON register */
-#define IFX_SSC_SFCON_SF_ENABLE 0x00000001
-#define IFX_SSC_SFCON_SF_DISABLE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004
-#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
-#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008
-#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000
-#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0
-#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4
-#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000
-#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16
-#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000
-#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000
-#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18
-#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000
-#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000
-#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000
-#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000
-#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22
-#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096
-#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024
-
-#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
-#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
-#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
-
-/* SFSTAT register */
-#define IFX_SSC_SFSTAT_IN_DATA 0x00000001
-#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002
-#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0
-#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000
-#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
-
-#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
-#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
-
-/* RXREQ register */
-#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF
-#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0
-
-/* RXCNT register */
-#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF
-#define IFX_SSC_RXCNT_TODO_OFFSET 0
-
-/* DMACON register */
-#define IFX_SSC_DMACON_RXON 0x00000001
-#define IFX_SSC_DMACON_RXOFF 0x00000000
-#define IFX_SSC_DMACON_TXON 0x00000002
-#define IFX_SSC_DMACON_TXOFF 0x00000000
-#define IFX_SSC_DMACON_DMAON 0x00000003
-#define IFX_SSC_DMACON_DMAOFF 0x00000000
-#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C
-#define IFX_SSC_DMACON_CLASS_OFFSET 2
-
-/* register access macros */
-#define ifx_ssc_fstat_received_words(status) (status & 0x003F)
-#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
-
-#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
-#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
-#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
-#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
-#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
-#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
-#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
-
-#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
-#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
-
-#endif
diff --git a/target/linux/danube/files/include/asm-mips/mach-danube/irq.h b/target/linux/danube/files/include/asm-mips/mach-danube/irq.h
deleted file mode 100644
index 7f1e7d3325..0000000000
--- a/target/linux/danube/files/include/asm-mips/mach-danube/irq.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __DANUBE_IRQ_H
-#define __DANUBE_IRQ_H
-
-#define NR_IRQS 256
-#include_next <irq.h>
-
-#endif
-
diff --git a/target/linux/danube/image/Makefile b/target/linux/danube/image/Makefile
deleted file mode 100644
index 41082982b9..0000000000
--- a/target/linux/danube/image/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-define Image/BuildKernel
- $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
- mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma -e \
- 0x80002000 \
- -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
- -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage
-
- cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
-endef
-
-define Image/Build/squashfs
- cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
- $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image)
-endef
-
-define Image/Build/jffs2-64k
- dd if=$(KDIR)/uImage of=$(KDIR)/uImage.$(1) bs=64k conv=sync
- cat $(KDIR)/uImage.$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
-endef
-
-define Image/Build
- $(call Image/Build/$(1),$(1))
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/danube/patches/100-board.patch b/target/linux/danube/patches/100-board.patch
deleted file mode 100644
index c73c4e7fdc..0000000000
--- a/target/linux/danube/patches/100-board.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-Index: linux-2.6.23/arch/mips/Kconfig
-===================================================================
---- linux-2.6.23.orig/arch/mips/Kconfig 2007-10-16 22:12:19.000000000 +0200
-+++ linux-2.6.23/arch/mips/Kconfig 2007-10-16 22:12:21.000000000 +0200
-@@ -58,6 +58,17 @@
- select SYS_SUPPORTS_LITTLE_ENDIAN
- select GENERIC_HARDIRQS_NO__DO_IRQ
-
-+config DANUBE
-+ bool "Danube support"
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select HAVE_STD_PC_SERIAL_PORT
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SYS_HAS_EARLY_PRINTK
-+ select HW_HAS_PCI
-+
- config MACH_DECSTATION
- bool "DECstations"
- select BOOT_ELF32
-@@ -605,6 +615,7 @@
- source "arch/mips/tx4927/Kconfig"
- source "arch/mips/tx4938/Kconfig"
- source "arch/mips/vr41xx/Kconfig"
-+source "arch/mips/danube/Kconfig"
-
- endmenu
-
-Index: linux-2.6.23/arch/mips/Makefile
-===================================================================
---- linux-2.6.23.orig/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200
-+++ linux-2.6.23/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200
-@@ -276,6 +276,13 @@
- cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
- load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
-
-+#
-+# Infineon DANUBE
-+#
-+core-$(CONFIG_DANUBE) += arch/mips/danube/
-+cflags-$(CONFIG_DANUBE) += -Iinclude/asm-mips/mach-danube
-+load-$(CONFIG_DANUBE) += 0xffffffff80002000
-+
- #
- # DECstation family
- #
-Index: linux-2.6.23/include/asm-mips/bootinfo.h
-===================================================================
---- linux-2.6.23.orig/include/asm-mips/bootinfo.h 2007-10-16 22:12:19.000000000 +0200
-+++ linux-2.6.23/include/asm-mips/bootinfo.h 2007-10-16 22:12:21.000000000 +0200
-@@ -208,6 +208,13 @@
- #define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
- #define MACH_WRPPMC 1
-
-+/*
-+ * Valid machtype for group ATHEROS
-+ */
-+#define MACH_GROUP_DANUBE 29
-+#define MACH_INFINEON_DANUBE 0
-+
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
diff --git a/target/linux/danube/patches/110-drivers.patch b/target/linux/danube/patches/110-drivers.patch
deleted file mode 100644
index 35a2024bb6..0000000000
--- a/target/linux/danube/patches/110-drivers.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-Index: linux-2.6.23/drivers/serial/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/serial/Kconfig 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/serial/Kconfig 2007-12-13 20:41:57.000000000 +0100
-@@ -1259,4 +1259,10 @@
- Currently, only 8250 compatible ports are supported, but
- others can easily be added.
-
-+config SERIAL_DANUBE
-+ bool "Danube serial driver"
-+ depends on DANUBE
-+ help
-+ Driver for the danubes built in ASC hardware
-+
- endmenu
-Index: linux-2.6.23/drivers/serial/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/serial/Makefile 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/serial/Makefile 2007-12-13 20:41:57.000000000 +0100
-@@ -64,3 +64,4 @@
- obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
- obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
- obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
-+obj-$(CONFIG_SERIAL_DANUBE) += danube_asc.o
-Index: linux-2.6.23/drivers/mtd/maps/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-12-13 20:41:57.000000000 +0100
-@@ -71,3 +71,4 @@
- obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
- obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
- obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
-+obj-$(CONFIG_MTD_DANUBE) += danube.o
-Index: linux-2.6.23/drivers/net/Kconfig
-===================================================================
---- linux-2.6.23.orig/drivers/net/Kconfig 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/net/Kconfig 2007-12-13 20:41:57.000000000 +0100
-@@ -339,6 +339,18 @@
-
- source "drivers/net/arm/Kconfig"
-
-+config DANUBE_MII0
-+ tristate "Infineon Danube eth0 driver"
-+ depends on DANUBE
-+ help
-+ Support for the MII0 inside the Danube SOC
-+
-+config DANUBE_MII1
-+ tristate "Infineon Danube eth1 driver"
-+ depends on DANUBE
-+ help
-+ Support for the MII1 inside the Danube SOC
-+
- config AX88796
- tristate "ASIX AX88796 NE2000 clone support"
- depends on ARM || MIPS
-Index: linux-2.6.23/drivers/net/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/net/Makefile 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/net/Makefile 2007-12-13 20:41:57.000000000 +0100
-@@ -208,6 +208,7 @@
- obj-$(CONFIG_FEC_8XX) += fec_8xx/
- obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
- obj-$(CONFIG_MLX4_CORE) += mlx4/
-+obj-$(CONFIG_DANUBE_MII0) += danube_mii0.o
-
- obj-$(CONFIG_MACB) += macb.o
-
-Index: linux-2.6.23/drivers/char/watchdog/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/char/watchdog/Makefile 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/char/watchdog/Makefile 2007-12-13 20:41:57.000000000 +0100
-@@ -90,6 +90,7 @@
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
- obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
-+obj-$(CONFIG_DANUBE_WDT) += danube_wdt.o
-
- # PARISC Architecture
-
-Index: linux-2.6.23/drivers/char/Makefile
-===================================================================
---- linux-2.6.23.orig/drivers/char/Makefile 2007-12-13 20:41:42.000000000 +0100
-+++ linux-2.6.23/drivers/char/Makefile 2007-12-14 22:41:07.000000000 +0100
-@@ -135,3 +135,8 @@
- rm $@.tmp
-
- endif
-+
-+obj-$(CONFIG_DANUBE_LED) += danube_led.o
-+obj-$(CONFIG_DANUBE_GPIO) += danube_gpio.o
-+obj-$(CONFIG_DANUBE_SSC) += danube_ssc.o
-+obj-$(CONFIG_DANUBE_EEPROM) += danube_eeprom.o
diff --git a/target/linux/danube/patches/160-cfi-swap.patch b/target/linux/danube/patches/160-cfi-swap.patch
deleted file mode 100644
index ca70928713..0000000000
--- a/target/linux/danube/patches/160-cfi-swap.patch
+++ /dev/null
@@ -1,15 +0,0 @@
-Index: linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c
-===================================================================
---- linux-2.6.23.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:02:29.000000000 +0100
-+++ linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:07:15.000000000 +0100
-@@ -1007,7 +1007,9 @@
- int ret = 0;
- map_word oldd;
- int retry_cnt = 0;
--
-+#ifdef CONFIG_DANUBE
-+ adr ^= 2;
-+#endif
- adr += chip->start;
-
- spin_lock(chip->mutex);
diff --git a/target/linux/danube/series b/target/linux/danube/series
deleted file mode 100644
index 19bcf21175..0000000000
--- a/target/linux/danube/series
+++ /dev/null
@@ -1,88 +0,0 @@
-Makefile
-base-files/etc/config/network
-config-2.6.23
-files/arch/mips/danube/Kconfig
-files/arch/mips/danube/Makefile
-files/arch/mips/danube/built-in.o
-files/arch/mips/danube/dma-core.c
-files/arch/mips/danube/dma-core.h
-files/arch/mips/danube/dma-core.o
-files/arch/mips/danube/interrupt.c
-files/arch/mips/danube/interrupt.o
-files/arch/mips/danube/kgdb_serial.c
-files/arch/mips/danube/pci.c
-files/arch/mips/danube/prom.c
-files/arch/mips/danube/prom.o
-files/arch/mips/danube/reset.c
-files/arch/mips/danube/reset.o
-files/arch/mips/danube/setup.c
-files/arch/mips/danube/setup.o
-files/drivers/mtd/maps/danube.c
-files/drivers/serial/danube_asc.c
-files/drivers/serial/danube_asc.c~
-files/drivers/serial/danube_asc.o
-files/include/asm-mips/danube/adm6996.h
-files/include/asm-mips/danube/atm_mib.h
-files/include/asm-mips/danube/danube.h
-files/include/asm-mips/danube/danube_bcu.h
-files/include/asm-mips/danube/danube_cgu.h
-files/include/asm-mips/danube/danube_deu.h
-files/include/asm-mips/danube/danube_deu_structs.h
-files/include/asm-mips/danube/danube_dma.h
-files/include/asm-mips/danube/danube_eth2.h
-files/include/asm-mips/danube/danube_eth2_fw.h
-files/include/asm-mips/danube/danube_eth2_fw_with_dplus.h
-files/include/asm-mips/danube/danube_eth2_fw_with_dplus_sb.h
-files/include/asm-mips/danube/danube_eth_d2.h
-files/include/asm-mips/danube/danube_eth_fw_d2.h
-files/include/asm-mips/danube/danube_gpio.h
-files/include/asm-mips/danube/danube_gptu.h
-files/include/asm-mips/danube/danube_icu.h
-files/include/asm-mips/danube/danube_led.h
-files/include/asm-mips/danube/danube_mei.h
-files/include/asm-mips/danube/danube_mei_app.h
-files/include/asm-mips/danube/danube_mei_app_ioctl.h
-files/include/asm-mips/danube/danube_mei_bsp.h
-files/include/asm-mips/danube/danube_mei_ioctl.h
-files/include/asm-mips/danube/danube_mei_linux.h
-files/include/asm-mips/danube/danube_misc.h
-files/include/asm-mips/danube/danube_pmu.h
-files/include/asm-mips/danube/danube_ppa_api.h
-files/include/asm-mips/danube/danube_ppa_eth_fw_d2.h
-files/include/asm-mips/danube/danube_ppa_eth_fw_d3.h
-files/include/asm-mips/danube/danube_ppa_hook.h
-files/include/asm-mips/danube/danube_ppa_ppe_d3_hal.h
-files/include/asm-mips/danube/danube_ppa_ppe_hal.h
-files/include/asm-mips/danube/danube_ppa_stack_al.h
-files/include/asm-mips/danube/danube_ppe.h
-files/include/asm-mips/danube/danube_ppe_fw.h
-files/include/asm-mips/danube/danube_ppe_fw_fix_for_pci.h
-files/include/asm-mips/danube/danube_rcu.h
-files/include/asm-mips/danube/danube_sdio_controller.h
-files/include/asm-mips/danube/danube_sdio_controller_registers.h
-files/include/asm-mips/danube/danube_ssc.h
-files/include/asm-mips/danube/danube_sw.h
-files/include/asm-mips/danube/danube_wdt.h
-files/include/asm-mips/danube/danube_ws.h
-files/include/asm-mips/danube/emulation.h
-files/include/asm-mips/danube/ifx_mps.h
-files/include/asm-mips/danube/ifx_peripheral_definitions.h
-files/include/asm-mips/danube/ifx_sd_card.h
-files/include/asm-mips/danube/ifx_serial.h
-files/include/asm-mips/danube/ifx_ssc.h
-files/include/asm-mips/danube/ifx_ssc_defines.h
-files/include/asm-mips/danube/ifx_types.h
-files/include/asm-mips/danube/infineon_sdio.h
-files/include/asm-mips/danube/infineon_sdio_card.h
-files/include/asm-mips/danube/infineon_sdio_cmds.h
-files/include/asm-mips/danube/infineon_sdio_controller.h
-files/include/asm-mips/danube/irq.h
-files/include/asm-mips/danube/memcopy.h
-files/include/asm-mips/danube/mps.h
-files/include/asm-mips/danube/port.h
-files/include/asm-mips/danube/ppe.h
-files/include/asm-mips/danube/serial.h
-files/include/asm-mips/mach-danube/irq.h
-image/Makefile
-patches/100-board.patch
-patches/110-drivers.patch