aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/coldfire/patches/071-m5445x_i2c.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/coldfire/patches/071-m5445x_i2c.patch')
-rw-r--r--target/linux/coldfire/patches/071-m5445x_i2c.patch699
1 files changed, 699 insertions, 0 deletions
diff --git a/target/linux/coldfire/patches/071-m5445x_i2c.patch b/target/linux/coldfire/patches/071-m5445x_i2c.patch
new file mode 100644
index 0000000000..ecda4d6c70
--- /dev/null
+++ b/target/linux/coldfire/patches/071-m5445x_i2c.patch
@@ -0,0 +1,699 @@
+From e1618e943f60a4f8f778c4f7c389e2fa13eb0a83 Mon Sep 17 00:00:00 2001
+From: Kurt Mahan <kmahan@freescale.com>
+Date: Thu, 26 Jun 2008 16:29:56 -0600
+Subject: [PATCH] Add I2C support for the M5445x platforms.
+
+LTIBName: m5445x-i2c
+Signed-off-by: Kurt Mahan <kmahan@freescale.com>
+---
+ drivers/i2c/busses/Kconfig | 10 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-mcf.c | 573 ++++++++++++++++++++++++++++++++++++++++++
+ drivers/i2c/busses/i2c-mcf.h | 75 ++++++
+ 4 files changed, 659 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/i2c/busses/i2c-mcf.c
+ create mode 100644 drivers/i2c/busses/i2c-mcf.h
+
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -302,6 +302,16 @@ config I2C_POWERMAC
+ This support is also available as a module. If so, the module
+ will be called i2c-powermac.
+
++config I2C_MCF
++ tristate "MCF ColdFire"
++ depends on I2C && EXPERIMENTAL
++ help
++ If you say yes to this option, support will be included for the
++ I2C on most ColdFire CPUs
++
++ This driver can also be built as a module. If so, the module
++ will be called i2c-mcf.
++
+ config I2C_MPC
+ tristate "MPC107/824x/85xx/52xx/86xx"
+ depends on PPC32
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -53,6 +53,7 @@ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
+ obj-$(CONFIG_I2C_MCF548x) += i2c-mcf548x.o
++obj-$(CONFIG_I2C_MCF) += i2c-mcf.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mcf.c
+@@ -0,0 +1,573 @@
++/*
++ i2c-mcf.c - Part of lm_sensors, Linux kernel modules for hardware monitoring
++
++ Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca>
++ <http://www3.sympatico.ca/derek.cheung>
++
++ Copyright (c) 2006-2007, emlix
++ Sebastian Hess <sh@emlix.com>
++
++ Copyright (c) 2006-2007 Freescale Semiconductor, Inc
++ Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>
++ Matt Waddel <Matt.Waddel@freescale.com>
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++
++ Changes:
++ v0.1 26 March 2005
++ Initial Release - developed on uClinux with 2.6.9 kernel
++
++ v0.2 29 May 2006
++ Modified to be more generic and added support for
++ i2c_master_xfer
++
++ This I2C adaptor supports the ColdFire CPU I2C module. Since most Coldfire
++ CPUs' I2C module use the same register set (e.g., MCF5249), the code is very
++ portable and re-usable to other Coldfire CPUs.
++
++ The transmission frequency is set at about 100KHz for the CPU board with
++ 8MHz crystal. If the CPU board uses different system clock frequency, you
++ should change the following line:
++ static int __init i2c_coldfire_init(void)
++ {
++ .........
++ // Set transmission frequency 0x15 = ~100kHz
++ *MCF_I2C_I2FDR = 0x15;
++ ........
++ }
++
++ Remember to perform a dummy read to set the ColdFire CPU's I2C module for
++ read before reading the actual byte from a device
++
++ The I2C_SM_BUS_BLOCK_DATA function are not yet ready but most lm_senors
++ do not care
++*/
++
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/errno.h>
++#include <linux/i2c.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <asm/coldfire.h>
++#include <asm/mcfsim.h>
++#include <asm/types.h>
++#include <linux/platform_device.h>
++#include "i2c-mcf.h"
++
++
++static struct i2c_algorithm coldfire_algorithm = {
++ /*.name = "ColdFire I2C algorithm",
++ .id = I2C_ALGO_SMBUS,*/
++ .smbus_xfer = coldfire_i2c_access,
++ .master_xfer = coldfire_i2c_master,
++ .functionality = coldfire_func,
++};
++
++
++static struct i2c_adapter coldfire_adapter = {
++ .owner = THIS_MODULE,
++ .class = I2C_CLASS_HWMON,
++ .algo = &coldfire_algorithm,
++ .name = "ColdFire I2C adapter",
++};
++
++
++__u16 lastaddr;
++__u16 lastop;
++
++static inline int coldfire_do_first_start(__u16 addr,__u16 flags)
++{
++ int err;
++ /*
++ * Generate a stop and put the I2C module into slave mode
++ */
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
++
++ /*
++ * Generate a new Start signal
++ */
++ err = coldfire_i2c_start(flags & I2C_M_RD ? I2C_SMBUS_READ : I2C_SMBUS_WRITE,
++ addr, FIRST_START);
++ if(err) return err;
++
++ lastaddr = addr;
++ lastop = flags & I2C_M_RD; /* Ensure everything for new start */
++ return 0;
++}
++
++
++/*
++ * read one byte data from the I2C bus
++ */
++static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType) {
++
++ int timeout;
++
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MTX; /* master receive mode*/
++
++ if (ackType == NACK)
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /* generate NA */
++ else
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* generate ACK */
++
++
++ /* read data from the I2C bus */
++ *rxData = *MCF_I2C_I2DR;
++
++ /* printk(">>> %s I2DR data is %.2x \n", __FUNCTION__, *rxData); */
++
++ /* wait for data transfer to complete */
++ timeout = 500;
++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
++ udelay(1);
++ if (timeout <= 0)
++ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__,
++ timeout);
++
++
++ /* reset the interrupt bit */
++ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
++
++ if (timeout <= 0 )
++ return -1;
++ else
++ return 0;
++
++};
++
++
++/*
++ * write one byte data onto the I2C bus
++ */
++static int coldfire_write_data(const u8 txData) {
++
++ int timeout;
++
++ timeout = 500;
++
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_MTX; /* I2C module into TX mode */
++ *MCF_I2C_I2DR = txData; /* send the data */
++
++ /* wait for data transfer to complete */
++ /* rely on the interrupt handling bit */
++ timeout = 500;
++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
++ udelay(1);
++ if (timeout <=0)
++ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__,
++ timeout);
++
++
++ /* reset the interrupt bit */
++ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
++
++ if (timeout <= 0 )
++ return -1;
++ else
++ return 0;
++
++};
++
++
++
++
++/*
++ * Generate I2C start or repeat start signal
++ * Combine the 7 bit target_address and the R/W bit and put it onto the I2C bus
++ */
++static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE start_type) {
++
++ int timeout;
++
++ /* printk(">>> %s START TYPE %s \n", __FUNCTION__,
++ start_type == FIRST_START ? "FIRST_START":"REPEAT_START");*/
++
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN;
++
++ if (start_type == FIRST_START) {
++ /* Make sure the I2C bus is idle */
++ timeout = 500; /* 500us timeout */
++ while (timeout-- && (*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB))
++ udelay(1);
++ if (timeout <= 0) {
++ printk("%s - I2C bus always busy in the past 500us timeout is %d \n", __FUNCTION__, timeout);
++ goto check_rc;
++ }
++ /* generate a START and put the I2C module into MASTER TX mode*/
++ *MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX);
++
++ /* wait for bus busy to be set */
++ timeout = 500;
++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB))
++ udelay(1);
++ if (timeout <= 0) {
++ printk("%s - I2C bus is never busy after START. Timeout is %d \n", __FUNCTION__, timeout);
++ goto check_rc;
++ }
++
++ } else {
++ /* this is repeat START */
++ udelay(500); /* need some delay before repeat start */
++ *MCF_I2C_I2CR |= (MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_RSTA);
++ }
++
++
++ /* combine the R/W bit and the 7 bit target address and put it onto
++ the I2C bus */
++ *MCF_I2C_I2DR = ((target_address & 0x7F) << 1) | (read_write == I2C_SMBUS_WRITE ? 0x00 : 0x01);
++
++ /* wait for bus transfer to complete */
++ /* when one byte transfer is completed, IIF set at the faling edge of
++ the 9th clock */
++ timeout = 500;
++ while (timeout-- && !(*MCF_I2C_I2SR & MCF_I2C_I2SR_IIF))
++ udelay(1);
++ if (timeout <= 0)
++ printk("%s - I2C IIF never set. Timeout is %d \n", __FUNCTION__, timeout);
++
++
++check_rc:
++ /* reset the interrupt bit */
++ *MCF_I2C_I2SR &= ~MCF_I2C_I2SR_IIF;
++
++ if (timeout <= 0)
++ return -1;
++ else
++ return 0;
++};
++
++
++/*
++ * 5282 SMBUS supporting functions
++ */
++
++static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 addr,
++ unsigned short flags, char read_write,
++ u8 command, int size, union i2c_smbus_data *data)
++{
++ int rc = 0;
++ u8 rxData, tempRxData[2];
++
++ switch (size) {
++ case I2C_SMBUS_QUICK:
++ rc = coldfire_i2c_start(read_write, addr, FIRST_START); /* generate START */
++ break;
++ case I2C_SMBUS_BYTE:
++ rc = coldfire_i2c_start(read_write, addr, FIRST_START);
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_TXAK; /*generate NA */
++ if (read_write == I2C_SMBUS_WRITE)
++ rc += coldfire_write_data(command);
++ else {
++ coldfire_read_data(&rxData, NACK);/*dummy read*/
++ rc += coldfire_read_data(&rxData, NACK);
++ data->byte = rxData;
++ }
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset ACK bit */
++ break;
++ case I2C_SMBUS_BYTE_DATA:
++ rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr, FIRST_START);
++ rc += coldfire_write_data(command);
++ if (read_write == I2C_SMBUS_WRITE)
++ rc += coldfire_write_data(data->byte);
++ else {
++ /* This is SMBus READ Byte Data Request.
++ Perform REPEAT START */
++ rc += coldfire_i2c_start(I2C_SMBUS_READ, addr,
++ REPEAT_START);
++ coldfire_read_data(&rxData, ACK);/* dummy read*/
++ /* Disable Acknowledge, generate STOP after
++ next byte transfer */
++ rc += coldfire_read_data(&rxData, NACK);
++ data->byte = rxData;
++ }
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;/* reset to normal ACk */
++ break;
++ case I2C_SMBUS_PROC_CALL:
++ case I2C_SMBUS_WORD_DATA:
++ dev_info(&adap->dev, "size = I2C_SMBUS_WORD_DATA \n");
++ rc = coldfire_i2c_start(I2C_SMBUS_WRITE, addr,
++ FIRST_START);
++ rc += coldfire_write_data(command);
++ if (read_write == I2C_SMBUS_WRITE) {
++ rc += coldfire_write_data(data->word & 0x00FF);
++ rc += coldfire_write_data((data->word & 0x00FF) >> 8);
++ } else {
++ /* This is SMBUS READ WORD request.
++ Peform REPEAT START */
++ rc += coldfire_i2c_start(I2C_SMBUS_READ, addr,
++ REPEAT_START);
++ coldfire_read_data(&rxData, ACK);/* dummy read*/
++ /* Disable Acknowledge, generate STOP after
++ next byte transfer */
++ /* read the MS byte from the device */
++ rc += coldfire_read_data(&rxData, NACK);
++ tempRxData[1] = rxData;
++ /* read the LS byte from the device */
++ rc += coldfire_read_data(&rxData, NACK);
++ tempRxData[0] = rxData;
++ /* the host driver expect little endian
++ convention. Swap the byte */
++ data->word = (tempRxData[0] << 8)|tempRxData[1];
++ }
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK;
++ break;
++ case I2C_SMBUS_BLOCK_DATA:
++ /* Not done yet */
++ break;
++ default:
++ printk("Unsupported I2C size \n");
++ rc = -1;
++ break;
++ };
++
++ /* Generate a STOP and put I2C module into slave mode */
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
++
++ /* restore interrupt */
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN;
++
++ if (rc < 0)
++ return -1;
++ else
++ return 0;
++};
++
++
++/*
++ * List the SMBUS functions supported by this I2C adaptor
++ * Also tell the I2C Subsystem that we are able of master_xfer()
++ */
++static u32 coldfire_func(struct i2c_adapter *adapter)
++{
++ return(I2C_FUNC_SMBUS_QUICK |
++ I2C_FUNC_SMBUS_BYTE |
++ I2C_FUNC_SMBUS_PROC_CALL |
++ I2C_FUNC_SMBUS_BYTE_DATA |
++ I2C_FUNC_SMBUS_WORD_DATA |
++ I2C_FUNC_I2C |
++ I2C_FUNC_SMBUS_BLOCK_DATA);
++};
++
++static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs,
++ int num)
++{
++ u8 dummyRead;
++ struct i2c_msg *p;
++ int i, err = 0;
++ int ic=0;
++
++ lastaddr = 0;
++ lastop = 8;
++
++ /* disable the IRQ, we are doing polling */
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_IIEN;
++
++ dev_dbg(&adap->dev,"Num of actions: %d\n", num);
++
++ for (i = 0; !err && i < num; i++) {
++ p = &msgs[i];
++
++
++ if (!p->len)
++ {
++ dev_dbg(&adap->dev,"p->len == 0!\n");
++ continue;
++ }
++ /*
++ * Generate a new Start, if the target address differs from
++ * the last target, generate a stop in this case first
++ */
++ if(p->addr != lastaddr)
++ {
++ err = coldfire_do_first_start(p->addr,p->flags);
++ if(err)
++ {
++ dev_dbg(&adap->dev,"First Init failed!\n");
++ break;
++ }
++ }
++
++ else if((p->flags & I2C_M_RD) != lastop)
++ {
++ /*
++ * If the Operational Mode changed, we need to do this
++ * here ...
++ */
++ dev_dbg(&adap->dev,"%s(): Direction changed, was: %d; is now: %d\n", __FUNCTION__, lastop, p->flags & I2C_M_RD);
++
++ /* Last op was an read, now it's write: complete stop
++ and reinit */
++ if (lastop & I2C_M_RD)
++ {
++ dev_dbg(&adap->dev,"%s(): The device is in read state, we must reset!\n", __FUNCTION__);
++ if((err = coldfire_do_first_start(p->addr,p->flags)))
++ break;
++ }
++ else
++ {
++ dev_dbg(&adap->dev,"%s(): We switchted to read mode\n",__FUNCTION__);
++ if((err = coldfire_i2c_start((p->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE,
++ p->addr, REPEAT_START)))
++ break;
++ }
++
++ lastop = p->flags & I2C_M_RD; /* Save the last op */
++ }
++
++ if (p->flags & I2C_M_RD)
++ {
++ /*
++ * When ever we get here, a new session was activated,
++ * so read a dummy byte
++ */
++ coldfire_read_data(&dummyRead, ACK);
++ /*
++ * read p->len -1 bytes with ACK to the slave,
++ * read the last byte without the ACK, to inform him
++ * about the stop afterwards
++ */
++ ic = 0;
++ while(!err && (ic < p->len-1 ))
++ {
++ err = coldfire_read_data(p->buf+ic, ACK );
++ ic++;
++ }
++ if(!err)
++ err = coldfire_read_data(p->buf+ic, NACK);
++ dev_dbg(&coldfire_adapter.dev,"read: %2x\n",p->buf[ic]);
++ }
++ else
++ {
++ if(p->len == 2)
++ dev_dbg(&coldfire_adapter.dev,"writing: 0x %2x %2x\n", p->buf[0], p->buf[1]);
++
++ /*
++ * Write data to the slave
++ */
++ for(ic=0; !err && ic < p->len; ic++)
++ {
++ err = coldfire_write_data(p->buf[ic]);
++ if(err)
++ {
++ dev_dbg(&coldfire_adapter.dev, "Failed to write data\n");
++ }
++ }
++ }
++ }
++
++ /*
++ * Put the device into slave mode to enable the STOP Generation
++ * (the RTC needs this)
++ */
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_MSTA;
++
++ *MCF_I2C_I2CR &= ~MCF_I2C_I2CR_TXAK; /* reset the ACK bit */
++
++ /* restore interrupt */
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IIEN;
++
++ /* Return the number of messages processed, or the error code. */
++ if (err == 0)
++ err = num;
++ return err;
++}
++
++
++/*
++ * Initalize the 5282 I2C module
++ * Disable the 5282 I2C interrupt capability. Just use callback
++ */
++
++static int __init i2c_coldfire_init(void)
++{
++ int retval;
++ u8 dummyRead;
++
++#if defined(CONFIG_M532x) || defined(CONFIG_M5445X)
++ /*
++ * Initialize the GPIOs for I2C
++ */
++ MCF_GPIO_PAR_FECI2C |= (0
++ | MCF_GPIO_PAR_FECI2C_PAR_SDA(3)
++ | MCF_GPIO_PAR_FECI2C_PAR_SCL(3));
++#elif defined(CONFIG_M5253)
++ {
++ volatile u32 *reg;
++ /* GPIO Bit 41 = SCL0, Bit 42 = SDA0 */
++ reg = (volatile u32 *)(MCF_MBAR2 + MCFSIM2_GPIO1FUNC);
++ *reg &= 0xFFFFF9FF;
++ }
++#else
++ /* Initialize PASP0 and PASP1 to I2C functions, 5282 user guide 26-19 */
++ /* Port AS Pin Assignment Register (PASPAR) */
++ /* PASPA1 = 11 = AS1 pin is I2C SDA */
++ /* PASPA0 = 11 = AS0 pin is I2C SCL */
++ *MCF_GPIO_PASPAR |= 0x000F; /* u16 declaration */
++#endif
++
++
++ /* Set transmission frequency 0x15 = ~100kHz */
++ *MCF_I2C_I2FDR = 0x15;
++
++ /* set the 5282 I2C slave address though we never use it */
++ *MCF_I2C_I2ADR = 0x6A;
++
++ /* Enable I2C module and if IBB is set, do the special initialzation */
++ /* procedures as are documented at the 5282 User Guide page 24-11 */
++ *MCF_I2C_I2CR |= MCF_I2C_I2CR_IEN;
++ if ((*MCF_I2C_I2SR & MCF_I2C_I2SR_IBB) == 1) {
++ printk("%s - do special 5282 I2C init procedures \n",
++ __FUNCTION__);
++ *MCF_I2C_I2CR = 0x00;
++ *MCF_I2C_I2CR = 0xA0;
++ dummyRead = *MCF_I2C_I2DR;
++ *MCF_I2C_I2SR = 0x00;
++ *MCF_I2C_I2CR = 0x00;
++ }
++
++ /* default I2C mode is - slave and receive */
++ *MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_MSTA | MCF_I2C_I2CR_MTX);
++
++ coldfire_adapter.dev.parent = &platform_bus;
++ retval = i2c_add_adapter(&coldfire_adapter);
++
++ if (retval < 0)
++ printk("%s - return code is: %d \n", __FUNCTION__, retval);
++
++ return retval;
++};
++
++
++/*
++ * I2C module exit function
++ */
++
++static void __exit i2c_coldfire_exit(void)
++{
++ /* disable I2C and Interrupt */
++ *MCF_I2C_I2CR &= ~(MCF_I2C_I2CR_IEN | MCF_I2C_I2CR_IIEN);
++ i2c_del_adapter(&coldfire_adapter);
++
++};
++
++
++MODULE_AUTHOR("Derek CL Cheung <derek.cheung@sympatico.ca>");
++MODULE_DESCRIPTION("MCF5282 I2C adaptor");
++MODULE_LICENSE("GPL");
++
++module_init(i2c_coldfire_init);
++module_exit(i2c_coldfire_exit);
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-mcf.h
+@@ -0,0 +1,75 @@
++/*
++ i2c-mcf.h - header file for i2c-mcf.c
++
++ Copyright (c) 2005, Derek CL Cheung <derek.cheung@sympatico.ca>
++ <http://www3.sympatico.ca/derek.cheung>
++
++ Copyright (c) 2006-2007, emlix
++ Sebastian Hess <sh@emlix.com>
++
++ Copyright (c) 2006-2007 Freescale Semiconductor, Inc
++ Yaroslav Vinogradov <yaroslav.vinogradov@freescale.com>
++ Matt Waddel <Matt.Waddel@freescale.com>
++
++ This program is free software; you can redistribute it and/or modify
++ it under the terms of the GNU General Public License as published by
++ the Free Software Foundation; either version 2 of the License, or
++ (at your option) any later version.
++
++ This program is distributed in the hope that it will be useful,
++ but WITHOUT ANY WARRANTY; without even the implied warranty of
++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ GNU General Public License for more details.
++
++ You should have received a copy of the GNU General Public License
++ along with this program; if not, write to the Free Software
++ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++
++ Changes:
++ v0.1 26 March 2005
++ Initial Release - developed on uClinux with 2.6.9 kernel
++ v0.2 29 May 2006
++ Modified to be more generic and added support for
++ i2c_master_xfer
++*/
++
++
++#ifndef __I2C_MCF_H__
++#define __I2C_MCF_H__
++
++enum I2C_START_TYPE { FIRST_START, REPEAT_START };
++enum I2C_ACK_TYPE { ACK, NACK};
++
++/* Function prototypes */
++static u32 coldfire_func(struct i2c_adapter *adapter);
++static s32 coldfire_i2c_access(struct i2c_adapter *adap, u16 address,
++ unsigned short flags, char read_write,
++ u8 command, int size, union i2c_smbus_data *data);
++static int coldfire_write_data(const u8 data);
++static int coldfire_i2c_start(const char read_write, const u16 target_address, const enum I2C_START_TYPE i2c_start);
++static int coldfire_read_data(u8 * const rxData, const enum I2C_ACK_TYPE ackType);
++static int coldfire_i2c_master(struct i2c_adapter *adap,struct i2c_msg *msgs, int num);
++void dumpReg(char *, u16 addr, u8 data);
++
++#define MCF_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01)
++#define MCF_I2C_I2FDR_IC(x) (((x)&0x3F))
++
++/* I2C Control Register */
++#define MCF_I2C_I2CR_IEN (0x80) /* I2C enable */
++#define MCF_I2C_I2CR_IIEN (0x40) /* interrupt enable */
++#define MCF_I2C_I2CR_MSTA (0x20) /* master/slave mode */
++#define MCF_I2C_I2CR_MTX (0x10) /* transmit/receive mode */
++#define MCF_I2C_I2CR_TXAK (0x08) /* transmit acknowledge enable */
++#define MCF_I2C_I2CR_RSTA (0x04) /* repeat start */
++
++/* I2C Status Register */
++#define MCF_I2C_I2SR_ICF (0x80) /* data transfer bit */
++#define MCF_I2C_I2SR_IAAS (0x40) /* I2C addressed as a slave */
++#define MCF_I2C_I2SR_IBB (0x20) /* I2C bus busy */
++#define MCF_I2C_I2SR_IAL (0x10) /* aribitration lost */
++#define MCF_I2C_I2SR_SRW (0x04) /* slave read/write */
++#define MCF_I2C_I2SR_IIF (0x02) /* I2C interrupt */
++#define MCF_I2C_I2SR_RXAK (0x01) /* received acknowledge */
++
++/********************************************************************/
++#endif /* __I2C_MCF_H__ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 09:53:56 +0000