diff options
Diffstat (limited to 'target/linux/cns3xxx')
25 files changed, 1431 insertions, 0 deletions
diff --git a/target/linux/cns3xxx/config-3.18 b/target/linux/cns3xxx/config-3.18 new file mode 100644 index 0000000000..a23caf54f1 --- /dev/null +++ b/target/linux/cns3xxx/config-3.18 @@ -0,0 +1,290 @@ +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_CNS3XXX=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6=y +CONFIG_ARCH_MULTI_V6_V7=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set +CONFIG_ARCH_NR_GPIO=0 +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_ARCH_WM8750 is not set +CONFIG_ARM=y +# CONFIG_ARM_CPU_SUSPEND is not set +CONFIG_ARM_GIC=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +CONFIG_ATA=y +CONFIG_ATAGS=y +# CONFIG_ATA_SFF is not set +CONFIG_ATA_VERBOSE_ERROR=y +# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +CONFIG_AUTO_ZRELADDR=y +CONFIG_BLK_DEV_SD=y +CONFIG_BROADCOM_PHY=y +CONFIG_CACHE_L2X0=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CNS3XXX_ETH=y +CONFIG_COMMON_CLK=y +# CONFIG_COMMON_CLK_PXA is not set +CONFIG_CPU_32v6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_ABRT_EV6=y +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_PABRT_V6=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_V6K=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_BCM63XX is not set +# CONFIG_DEBUG_UART_PL01X is not set +# CONFIG_DEBUG_USER is not set +CONFIG_DMA_CACHE_FIQ_BROADCAST=y +CONFIG_DTC=y +CONFIG_EEPROM_AT24=y +CONFIG_FIQ=y +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HWMON=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_CNS3XXX=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_INTEL_SOC_PMIC is not set +CONFIG_IOMMU_HELPER=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +CONFIG_KERNFS=y +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_TRIGGER_NETDEV is not set +CONFIG_LIBFDT=y +# CONFIG_MACH_CNS3420VB is not set +CONFIG_MACH_GW2388=y +CONFIG_MDIO_BOARDINFO=y +# CONFIG_MFD_AXP20X is not set +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_CNS3XXX=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MULTI_IRQ_HANDLER=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_VENDOR_CAVIUM=y +CONFIG_NLS=y +CONFIG_NO_BOOTMEM=y +CONFIG_NR_CPUS=2 +CONFIG_NTP_PPS=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PHY_SAMSUNG_USB2 is not set +CONFIG_PL310_ERRATA_588369=y +CONFIG_PL310_ERRATA_727915=y +CONFIG_PL310_ERRATA_753970=y +CONFIG_PL310_ERRATA_769419=y +CONFIG_PPS=y +CONFIG_PPS_CLIENT_GPIO=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_PROC_STRIPPED is not set +CONFIG_RAID_ATTRS=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_DS1672=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SCHED_HRTICK=y +CONFIG_SCSI=y +CONFIG_SENSORS_AD7418=y +CONFIG_SENSORS_GSC=y +CONFIG_SERIAL_8250_NR_UARTS=3 +CONFIG_SERIAL_8250_RUNTIME_UARTS=3 +CONFIG_SERIAL_EARLYCON=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_CNS3XXX=y +CONFIG_SPI_MASTER=y +# CONFIG_STAGING is not set +CONFIG_STOP_MACHINE=y +CONFIG_SWIOTLB=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TREE_RCU=y +CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_CNS3XXX_EHCI=y +CONFIG_USB_CNS3XXX_OHCI=y +CONFIG_USB_COMMON=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_DEBUG is not set +CONFIG_USB_DWC2_HOST=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_PLATFORM=y +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_EHCI_PCI=y +# CONFIG_USB_ETH is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_XILINX is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USE_OF=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_VFP=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/cns3xxx/patches-3.18/000-cns3xxx_arch_include.patch b/target/linux/cns3xxx/patches-3.18/000-cns3xxx_arch_include.patch new file mode 100644 index 0000000000..f98fe0c2ba --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/000-cns3xxx_arch_include.patch @@ -0,0 +1,8 @@ +--- a/arch/arm/mach-cns3xxx/Makefile ++++ b/arch/arm/mach-cns3xxx/Makefile +@@ -1,3 +1,5 @@ ++ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include ++ + obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o + cns3xxx-y += core.o pm.o + cns3xxx-$(CONFIG_ATAGS) += devices.o diff --git a/target/linux/cns3xxx/patches-3.18/001-cns3xxx_section_fix.patch b/target/linux/cns3xxx/patches-3.18/001-cns3xxx_section_fix.patch new file mode 100644 index 0000000000..ba0e7259f9 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/001-cns3xxx_section_fix.patch @@ -0,0 +1,11 @@ +--- a/arch/arm/mach-cns3xxx/core.c ++++ b/arch/arm/mach-cns3xxx/core.c +@@ -339,7 +339,7 @@ static struct usb_ohci_pdata cns3xxx_usb + .power_off = csn3xxx_usb_power_off, + }; + +-static struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { ++static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { + { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, + { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, + { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, diff --git a/target/linux/cns3xxx/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/cns3xxx/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch new file mode 100644 index 0000000000..dd02323164 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/010-arm_introduce-dma-fiq-irq-broadcast.patch @@ -0,0 +1,64 @@ +--- a/arch/arm/include/asm/glue-cache.h ++++ b/arch/arm/include/asm/glue-cache.h +@@ -156,11 +156,19 @@ static inline void nop_dma_unmap_area(co + #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) + #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) + #define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range) ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST + #define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area) + + #define dmac_map_area __glue(_CACHE,_dma_map_area) + #define dmac_unmap_area __glue(_CACHE,_dma_unmap_area) + #define dmac_flush_range __glue(_CACHE,_dma_flush_range) ++#else ++#define __cpuc_flush_dcache_area __glue(fiq,_flush_kern_dcache_area) ++ ++#define dmac_map_area __glue(fiq,_dma_map_area) ++#define dmac_unmap_area __glue(fiq,_dma_unmap_area) ++#define dmac_flush_range __glue(fiq,_dma_flush_range) ++#endif /* CONFIG_DMA_CACHE_FIQ_BROADCAST */ + #endif + + #endif +--- a/arch/arm/mm/Kconfig ++++ b/arch/arm/mm/Kconfig +@@ -844,6 +844,17 @@ config DMA_CACHE_RWFO + in hardware, other workarounds are needed (e.g. cache + maintenance broadcasting in software via FIQ). + ++config DMA_CACHE_FIQ_BROADCAST ++ bool "Enable fiq broadcast DMA cache maintenance" ++ depends on CPU_V6K && SMP ++ select FIQ ++ help ++ The Snoop Control Unit on ARM11MPCore does not detect the ++ cache maintenance operations and the dma_{map,unmap}_area() ++ functions may leave stale cache entries on other CPUs. By ++ enabling this option, fiq broadcast in the ARMv6 ++ DMA cache maintenance functions is performed. ++ + config OUTER_CACHE + bool + +--- a/arch/arm/mm/flush.c ++++ b/arch/arm/mm/flush.c +@@ -304,6 +304,7 @@ void __sync_icache_dcache(pte_t pteval) + void flush_dcache_page(struct page *page) + { + struct address_space *mapping; ++ bool skip_broadcast = true; + + /* + * The zero page is never written to, so never has any dirty +@@ -314,7 +315,10 @@ void flush_dcache_page(struct page *page + + mapping = page_mapping(page); + +- if (!cache_ops_need_broadcast() && ++#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST ++ skip_broadcast = !cache_ops_need_broadcast(); ++#endif ++ if (skip_broadcast && + mapping && !page_mapped(page)) + clear_bit(PG_dcache_clean, &page->flags); + else { diff --git a/target/linux/cns3xxx/patches-3.18/020-watchdog_support.patch b/target/linux/cns3xxx/patches-3.18/020-watchdog_support.patch new file mode 100644 index 0000000000..74ffcc34bf --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/020-watchdog_support.patch @@ -0,0 +1,59 @@ +1. Made the connection between CNS3xxx SOCs(ARCH_CNS3xxx) and MPcore watchdog + since the CNS3xxx SOCs have ARM11 MPcore CPU. +2. Enable mpcore_watchdog option as module to default configuration at + arch/arm/configs/cns3420vb_defconfig. + +Signed-off-by: Tommy Lin <tommy.lin@caviumnetworks.com> + +--- +arch/arm/Kconfig | 1 + + arch/arm/configs/cns3420vb_defconfig | 2 ++ + arch/arm/mach-cns3xxx/cns3420vb.c | 22 ++++++++++++++++++++++ + 3 files changed, 25 insertions(+), 0 deletions(-) + +--- a/arch/arm/configs/cns3420vb_defconfig ++++ b/arch/arm/configs/cns3420vb_defconfig +@@ -56,6 +56,8 @@ CONFIG_LEGACY_PTY_COUNT=16 + # CONFIG_HW_RANDOM is not set + # CONFIG_HWMON is not set + # CONFIG_VGA_CONSOLE is not set ++CONFIG_WATCHDOG=y ++CONFIG_MPCORE_WATCHDOG=m + # CONFIG_HID_SUPPORT is not set + # CONFIG_USB_SUPPORT is not set + CONFIG_MMC=y +--- a/arch/arm/mach-cns3xxx/cns3420vb.c ++++ b/arch/arm/mach-cns3xxx/cns3420vb.c +@@ -206,10 +206,32 @@ static struct platform_device cns3xxx_us + }, + }; + ++/* Watchdog */ ++static struct resource cns3xxx_watchdog_resources[] = { ++ [0] = { ++ .start = CNS3XXX_TC11MP_TWD_BASE, ++ .end = CNS3XXX_TC11MP_TWD_BASE + PAGE_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_LOCALWDOG, ++ .end = IRQ_LOCALWDOG, ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device cns3xxx_watchdog_device = { ++ .name = "mpcore_wdt", ++ .id = -1, ++ .num_resources = ARRAY_SIZE(cns3xxx_watchdog_resources), ++ .resource = cns3xxx_watchdog_resources, ++}; ++ + /* + * Initialization + */ + static struct platform_device *cns3420_pdevs[] __initdata = { ++ &cns3xxx_watchdog_device, + &cns3420_nor_pdev, + &cns3xxx_usb_ehci_device, + &cns3xxx_usb_ohci_device, diff --git a/target/linux/cns3xxx/patches-3.18/025-smp_support.patch b/target/linux/cns3xxx/patches-3.18/025-smp_support.patch new file mode 100644 index 0000000000..418c065a97 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/025-smp_support.patch @@ -0,0 +1,30 @@ +--- a/arch/arm/mach-cns3xxx/Makefile ++++ b/arch/arm/mach-cns3xxx/Makefile +@@ -5,3 +5,5 @@ cns3xxx-y += core.o pm.o + cns3xxx-$(CONFIG_ATAGS) += devices.o + cns3xxx-$(CONFIG_PCI) += pcie.o + cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o ++cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o ++cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o +--- a/arch/arm/mach-cns3xxx/Kconfig ++++ b/arch/arm/mach-cns3xxx/Kconfig +@@ -2,6 +2,9 @@ menuconfig ARCH_CNS3XXX + bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 + select ARM_GIC + select PCI_DOMAINS if PCI ++ select HAVE_ARM_SCU if SMP ++ select HAVE_ARM_TWD if LOCAL_TIMERS ++ select HAVE_SMP + help + Support for Cavium Networks CNS3XXX platform. + +--- a/arch/arm/mach-cns3xxx/core.h ++++ b/arch/arm/mach-cns3xxx/core.h +@@ -13,6 +13,7 @@ + + #include <linux/reboot.h> + ++extern struct smp_operations cns3xxx_smp_ops; + extern void cns3xxx_timer_init(void); + + #ifdef CONFIG_CACHE_L2X0 diff --git a/target/linux/cns3xxx/patches-3.18/030-pcie_clock.patch b/target/linux/cns3xxx/patches-3.18/030-pcie_clock.patch new file mode 100644 index 0000000000..45c73cb756 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/030-pcie_clock.patch @@ -0,0 +1,11 @@ +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -331,8 +331,6 @@ void __init cns3xxx_pcie_init_late(void) + "imprecise external abort"); + + for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { +- cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_PCIE(i)); +- cns3xxx_pwr_soft_rst(0x1 << PM_SOFT_RST_REG_OFFST_PCIE(i)); + cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); + cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); + pci_common_init(&cns3xxx_pcie[i].hw_pci); diff --git a/target/linux/cns3xxx/patches-3.18/031-pcie_init.patch b/target/linux/cns3xxx/patches-3.18/031-pcie_init.patch new file mode 100644 index 0000000000..28c3570775 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/031-pcie_init.patch @@ -0,0 +1,33 @@ +--- a/arch/arm/mach-cns3xxx/laguna.c ++++ b/arch/arm/mach-cns3xxx/laguna.c +@@ -849,7 +849,6 @@ static struct map_desc laguna_io_desc[] + static void __init laguna_map_io(void) + { + cns3xxx_map_io(); +- cns3xxx_pcie_iotable_init(); + iotable_init(ARRAY_AND_SIZE(laguna_io_desc)); + laguna_early_serial_setup(); + } +@@ -873,15 +872,6 @@ static int laguna_register_gpio(struct g + return ret; + } + +-static int __init laguna_pcie_init(void) +-{ +- if (!machine_is_gw2388()) +- return 0; +- +- return cns3xxx_pcie_init(); +-} +-subsys_initcall(laguna_pcie_init); +- + static int __init laguna_model_setup(void) + { + u32 __iomem *mem; +@@ -1075,5 +1065,6 @@ MACHINE_START(GW2388, "Gateworks Corpora + .init_irq = cns3xxx_init_irq, + .init_time = cns3xxx_timer_init, + .init_machine = laguna_init, ++ .init_late = cns3xxx_pcie_init_late, + .restart = cns3xxx_restart, + MACHINE_END diff --git a/target/linux/cns3xxx/patches-3.18/040-fiq_support.patch b/target/linux/cns3xxx/patches-3.18/040-fiq_support.patch new file mode 100644 index 0000000000..4f09a36f14 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/040-fiq_support.patch @@ -0,0 +1,40 @@ +--- a/arch/arm/mach-cns3xxx/Kconfig ++++ b/arch/arm/mach-cns3xxx/Kconfig +@@ -5,6 +5,7 @@ menuconfig ARCH_CNS3XXX + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS + select HAVE_SMP ++ select FIQ + help + Support for Cavium Networks CNS3XXX platform. + +--- a/arch/arm/mach-cns3xxx/Makefile ++++ b/arch/arm/mach-cns3xxx/Makefile +@@ -5,5 +5,5 @@ cns3xxx-y += core.o pm.o + cns3xxx-$(CONFIG_ATAGS) += devices.o + cns3xxx-$(CONFIG_PCI) += pcie.o + cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o +-cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o ++cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o + cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o +--- a/arch/arm/mach-cns3xxx/cns3xxx.h ++++ b/arch/arm/mach-cns3xxx/cns3xxx.h +@@ -267,6 +267,7 @@ + #define MISC_PCIE_INT_MASK(x) MISC_MEM_MAP(0x978 + (x) * 0x100) + #define MISC_PCIE_INT_STATUS(x) MISC_MEM_MAP(0x97C + (x) * 0x100) + ++#define MISC_FIQ_CPU(x) MISC_MEM_MAP(0xA58 - (x) * 0x4) + /* + * Power management and clock control + */ +--- a/arch/arm/mm/Kconfig ++++ b/arch/arm/mm/Kconfig +@@ -827,7 +827,7 @@ config KUSER_HELPERS + + config DMA_CACHE_RWFO + bool "Enable read/write for ownership DMA cache maintenance" +- depends on CPU_V6K && SMP ++ depends on CPU_V6K && SMP && !ARCH_CNS3XXX + default y + help + The Snoop Control Unit on ARM11MPCore does not detect the diff --git a/target/linux/cns3xxx/patches-3.18/045-twd_base.patch b/target/linux/cns3xxx/patches-3.18/045-twd_base.patch new file mode 100644 index 0000000000..f61b8ed3b4 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/045-twd_base.patch @@ -0,0 +1,45 @@ +--- a/arch/arm/mach-cns3xxx/core.c ++++ b/arch/arm/mach-cns3xxx/core.c +@@ -17,6 +17,7 @@ + #include <linux/platform_device.h> + #include <linux/usb/ehci_pdriver.h> + #include <linux/usb/ohci_pdriver.h> ++#include <asm/smp_twd.h> + #include <asm/mach/arch.h> + #include <asm/mach/map.h> + #include <asm/mach/time.h> +@@ -26,6 +27,8 @@ + #include "core.h" + #include "pm.h" + ++#define IRQ_LOCALTIMER 29 ++ + static struct map_desc cns3xxx_io_desc[] __initdata = { + { + .virtual = CNS3XXX_TC11MP_SCU_BASE_VIRT, +@@ -191,6 +194,17 @@ static struct irqaction cns3xxx_timer_ir + .handler = cns3xxx_timer_interrupt, + }; + ++static void __init cns3xxx_init_twd(void) ++{ ++#ifdef CONFIG_LOCAL_TIMERS ++ static DEFINE_TWD_LOCAL_TIMER(cns3xx_twd_local_timer, ++ CNS3XXX_TC11MP_TWD_BASE, ++ IRQ_LOCALTIMER); ++ ++ twd_local_timer_register(&cns3xx_twd_local_timer); ++#endif ++} ++ + /* + * Set up the clock source and clock events devices + */ +@@ -244,6 +258,7 @@ static void __init __cns3xxx_timer_init( + setup_irq(timer_irq, &cns3xxx_timer_irq); + + cns3xxx_clockevents_init(timer_irq); ++ cns3xxx_init_twd(); + } + + void __init cns3xxx_timer_init(void) diff --git a/target/linux/cns3xxx/patches-3.18/055-pcie_io.patch b/target/linux/cns3xxx/patches-3.18/055-pcie_io.patch new file mode 100644 index 0000000000..4680853e6e --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/055-pcie_io.patch @@ -0,0 +1,19 @@ +--- a/arch/arm/mach-cns3xxx/core.c ++++ b/arch/arm/mach-cns3xxx/core.c +@@ -81,6 +81,16 @@ static struct map_desc cns3xxx_io_desc[] + .pfn = __phys_to_pfn(CNS3XXX_PCIE1_CFG1_BASE), + .length = SZ_16M, + .type = MT_DEVICE, ++ }, { ++ .virtual = CNS3XXX_PCIE0_IO_BASE_VIRT, ++ .pfn = __phys_to_pfn(CNS3XXX_PCIE0_IO_BASE), ++ .length = SZ_16M, ++ .type = MT_DEVICE, ++ }, { ++ .virtual = CNS3XXX_PCIE1_IO_BASE_VIRT, ++ .pfn = __phys_to_pfn(CNS3XXX_PCIE1_IO_BASE), ++ .length = SZ_16M, ++ .type = MT_DEVICE, + #endif + }, + }; diff --git a/target/linux/cns3xxx/patches-3.18/060-pcie_abort.patch b/target/linux/cns3xxx/patches-3.18/060-pcie_abort.patch new file mode 100644 index 0000000000..d72629f13f --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/060-pcie_abort.patch @@ -0,0 +1,129 @@ +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -88,6 +88,79 @@ static void __iomem *cns3xxx_pci_cfg_bas + return base + (where & 0xffc) + (devfn << 12); + } + ++static inline int check_master_abort(struct pci_bus *bus, unsigned int devfn, int where) ++{ ++ struct cns3xxx_pcie *cnspci = pbus_to_cnspci(bus); ++ ++ /* check PCI-compatible status register after access */ ++ if (cnspci->linked) { ++ void __iomem *host_base; ++ u32 sreg, ereg; ++ ++ host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual; ++ sreg = __raw_readw(host_base + 0x6) & 0xF900; ++ ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg ++ ++ if (sreg | ereg) { ++ /* SREG: ++ * BIT15 - Detected Parity Error ++ * BIT14 - Signaled System Error ++ * BIT13 - Received Master Abort ++ * BIT12 - Received Target Abort ++ * BIT11 - Signaled Target Abort ++ * BIT08 - Master Data Parity Error ++ * ++ * EREG: ++ * BIT20 - Unsupported Request ++ * BIT19 - ECRC ++ * BIT18 - Malformed TLP ++ * BIT17 - Receiver Overflow ++ * BIT16 - Unexpected Completion ++ * BIT15 - Completer Abort ++ * BIT14 - Completion Timeout ++ * BIT13 - Flow Control Protocol Error ++ * BIT12 - Poisoned TLP ++ * BIT04 - Data Link Protocol Error ++ * ++ * TODO: see Documentation/pci-error-recovery.txt ++ * implement error_detected handler ++ */ ++/* ++ printk("pci error: %04d:%02x:%02x.%02x sreg=0x%04x ereg=0x%08x", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), sreg, ereg); ++ if (sreg & BIT(15)) printk(" <PERR"); ++ if (sreg & BIT(14)) printk(" >SERR"); ++ if (sreg & BIT(13)) printk(" <MABRT"); ++ if (sreg & BIT(12)) printk(" <TABRT"); ++ if (sreg & BIT(11)) printk(" >TABRT"); ++ if (sreg & BIT( 8)) printk(" MPERR"); ++ ++ if (ereg & BIT(20)) printk(" Unsup"); ++ if (ereg & BIT(19)) printk(" ECRC"); ++ if (ereg & BIT(18)) printk(" MTLP"); ++ if (ereg & BIT(17)) printk(" OFLOW"); ++ if (ereg & BIT(16)) printk(" Unex"); ++ if (ereg & BIT(15)) printk(" ABRT"); ++ if (ereg & BIT(14)) printk(" COMPTO"); ++ if (ereg & BIT(13)) printk(" FLOW"); ++ if (ereg & BIT(12)) printk(" PTLP"); ++ if (ereg & BIT( 4)) printk(" DLINK"); ++ printk("\n"); ++*/ ++ pr_debug("%s failed port%d sreg=0x%04x\n", __func__, ++ cnspci->hw_pci.domain, sreg); ++ ++ /* make sure the status bits are reset */ ++ __raw_writew(sreg, host_base + 6); ++ __raw_writel(ereg, host_base + 0x104); ++ return 1; ++ } ++ } ++ else ++ return 1; ++ ++ return 0; ++} ++ + static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) + { +@@ -104,6 +177,11 @@ static int cns3xxx_pci_read_config(struc + + v = __raw_readl(base); + ++ if (check_master_abort(bus, devfn, where)) { ++ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)= master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size); ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ } ++ + if (bus->number == 0 && devfn == 0 && + (where & 0xffc) == PCI_CLASS_REVISION) { + /* +@@ -133,11 +211,19 @@ static int cns3xxx_pci_write_config(stru + return PCIBIOS_SUCCESSFUL; + + v = __raw_readl(base); ++ if (check_master_abort(bus, devfn, where)) { ++ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on read\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ } + + v &= ~(mask << shift); + v |= (val & mask) << shift; + + __raw_writel(v, base); ++ if (check_master_abort(bus, devfn, where)) { ++ printk(KERN_ERR "pci error: %04d:%02x:%02x.%02x %02x(%d)=0x%08x master_abort on write\n", pci_domain_nr(bus), bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, val); ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ } + + return PCIBIOS_SUCCESSFUL; + } +@@ -315,8 +401,14 @@ static void __init cns3xxx_pcie_hw_init( + static int cns3xxx_pcie_abort_handler(unsigned long addr, unsigned int fsr, + struct pt_regs *regs) + { ++#if 0 ++/* R14_ABORT = PC+4 for XSCALE but not ARM11MPCORE ++ * ignore imprecise aborts and use PCI-compatible Status register to ++ * determine errors instead ++ */ + if (fsr & (1 << 10)) + regs->ARM_pc += 4; ++#endif + return 0; + } + diff --git a/target/linux/cns3xxx/patches-3.18/065-pcie_skip_inactive.patch b/target/linux/cns3xxx/patches-3.18/065-pcie_skip_inactive.patch new file mode 100644 index 0000000000..837fc87d2d --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/065-pcie_skip_inactive.patch @@ -0,0 +1,11 @@ +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -424,6 +424,8 @@ void __init cns3xxx_pcie_init_late(void) + + for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { + cns3xxx_pcie_check_link(&cns3xxx_pcie[i]); ++ if (!cns3xxx_pcie[i].linked) ++ continue; + cns3xxx_pcie_hw_init(&cns3xxx_pcie[i]); + pci_common_init(&cns3xxx_pcie[i].hw_pci); + } diff --git a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch new file mode 100644 index 0000000000..0114d7e781 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch @@ -0,0 +1,31 @@ +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -416,6 +416,18 @@ config I2C_CBUS_GPIO + This driver can also be built as a module. If so, the module + will be called i2c-cbus-gpio. + ++config I2C_CNS3XXX ++ tristate "Cavium CNS3xxx I2C driver" ++ depends on ARCH_CNS3XXX ++ help ++ Support for Cavium CNS3xxx I2C controller driver. ++ ++ This driver can also be built as a module. If so, the module ++ will be called i2c-cns3xxx. ++ ++ Please note that this driver might be needed to bring up other ++ devices such as Cavium CNS3xxx Ethernet. ++ + config I2C_CPM + tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)" + depends on CPM1 || CPM2 +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += i2c- + obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o + obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o + obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o ++obj-$(CONFIG_I2C_CNS3XXX) += i2c-cns3xxx.o + obj-$(CONFIG_SCx200_ACB) += scx200_acb.o + + ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG diff --git a/target/linux/cns3xxx/patches-3.18/075-spi_support.patch b/target/linux/cns3xxx/patches-3.18/075-spi_support.patch new file mode 100644 index 0000000000..16a91f1a56 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/075-spi_support.patch @@ -0,0 +1,55 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -171,6 +171,13 @@ config SPI_CLPS711X + This enables dedicated general purpose SPI/Microwire1-compatible + master mode interface (SSI1) for CLPS711X-based CPUs. + ++config SPI_CNS3XXX ++ tristate "CNS3XXX SPI controller" ++ depends on ARCH_CNS3XXX && SPI_MASTER ++ select SPI_BITBANG ++ help ++ This enables using the CNS3XXX SPI controller in master mode. ++ + config SPI_COLDFIRE_QSPI + tristate "Freescale Coldfire QSPI controller" + depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x) +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -25,6 +25,7 @@ obj-$(CONFIG_SPI_BITBANG) += spi-bitban + obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o + obj-$(CONFIG_SPI_CADENCE) += spi-cadence.o + obj-$(CONFIG_SPI_CLPS711X) += spi-clps711x.o ++obj-$(CONFIG_SPI_CNS3XXX) += spi-cns3xxx.o + obj-$(CONFIG_SPI_COLDFIRE_QSPI) += spi-coldfire-qspi.o + obj-$(CONFIG_SPI_DAVINCI) += spi-davinci.o + obj-$(CONFIG_SPI_DESIGNWARE) += spi-dw.o +--- a/drivers/spi/spi-bitbang.c ++++ b/drivers/spi/spi-bitbang.c +@@ -332,6 +332,10 @@ static int spi_bitbang_transfer_one(stru + */ + if (!m->is_dma_mapped) + t->rx_dma = t->tx_dma = 0; ++ ++ t->last_in_message_list = ++ list_is_last(&t->transfer_list, &m->transfers); ++ + status = bitbang->txrx_bufs(spi, t); + } + if (status > 0) +--- a/include/linux/spi/spi.h ++++ b/include/linux/spi/spi.h +@@ -628,6 +628,13 @@ struct spi_transfer { + u32 speed_hz; + + struct list_head transfer_list; ++ ++#ifdef CONFIG_ARCH_CNS3XXX ++ unsigned last_in_message_list; ++#ifdef CONFIG_SPI_CNS3XXX_2IOREAD ++ u8 dio_read; ++#endif ++#endif + }; + + /** diff --git a/target/linux/cns3xxx/patches-3.18/080-sata_support.patch b/target/linux/cns3xxx/patches-3.18/080-sata_support.patch new file mode 100644 index 0000000000..c619787864 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/080-sata_support.patch @@ -0,0 +1,26 @@ +--- a/drivers/ata/ahci_platform.c ++++ b/drivers/ata/ahci_platform.c +@@ -29,12 +29,23 @@ static const struct ata_port_info ahci_p + .port_ops = &ahci_platform_ops, + }; + ++static const struct ata_port_info cns3xxx_port_info = { ++ .flags = AHCI_FLAG_COMMON, ++ .pio_mask = ATA_PIO4, ++ .udma_mask = ATA_UDMA6, ++ .port_ops = &ahci_pmp_retry_srst_ops, ++}; ++ + static int ahci_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; ++ const struct ata_port_info *info = &ahci_port_info; + int rc; + ++ if (IS_ENABLED(CONFIG_ARCH_CNS3XXX)) ++ info = &cns3xxx_port_info; ++ + hpriv = ahci_platform_get_resources(pdev); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); diff --git a/target/linux/cns3xxx/patches-3.18/085-ethernet_support.patch b/target/linux/cns3xxx/patches-3.18/085-ethernet_support.patch new file mode 100644 index 0000000000..258423a7f6 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/085-ethernet_support.patch @@ -0,0 +1,20 @@ +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -34,6 +34,7 @@ source "drivers/net/ethernet/adi/Kconfig + source "drivers/net/ethernet/broadcom/Kconfig" + source "drivers/net/ethernet/brocade/Kconfig" + source "drivers/net/ethernet/calxeda/Kconfig" ++source "drivers/net/ethernet/cavium/Kconfig" + source "drivers/net/ethernet/chelsio/Kconfig" + source "drivers/net/ethernet/cirrus/Kconfig" + source "drivers/net/ethernet/cisco/Kconfig" +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -20,6 +20,7 @@ obj-$(CONFIG_NET_BFIN) += adi/ + obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ + obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ + obj-$(CONFIG_NET_CALXEDA_XGMAC) += calxeda/ ++obj-$(CONFIG_NET_VENDOR_CAVIUM) += cavium/ + obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ + obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/ + obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ diff --git a/target/linux/cns3xxx/patches-3.18/090-timers.patch b/target/linux/cns3xxx/patches-3.18/090-timers.patch new file mode 100644 index 0000000000..2bddc1f67b --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/090-timers.patch @@ -0,0 +1,104 @@ +--- a/arch/arm/mach-cns3xxx/core.c ++++ b/arch/arm/mach-cns3xxx/core.c +@@ -135,12 +135,13 @@ static void cns3xxx_timer_set_mode(enum + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: +- reload = pclk * 20 / (3 * HZ) * 0x25000; ++ reload = pclk * 1000000 / HZ; + writel(reload, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + ctrl |= (1 << 0) | (1 << 2) | (1 << 9); + break; + case CLOCK_EVT_MODE_ONESHOT: + /* period set, and timer enabled in 'next_event' hook */ ++ writel(0, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); + ctrl |= (1 << 2) | (1 << 9); + break; + case CLOCK_EVT_MODE_UNUSED: +@@ -168,7 +169,7 @@ static struct clock_event_device cns3xxx + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_mode = cns3xxx_timer_set_mode, + .set_next_event = cns3xxx_timer_set_next_event, +- .rating = 350, ++ .rating = 300, + .cpumask = cpu_all_mask, + }; + +@@ -215,6 +216,35 @@ static void __init cns3xxx_init_twd(void + #endif + } + ++static cycle_t cns3xxx_get_cycles(struct clocksource *cs) ++{ ++ u64 val; ++ ++ val = readl(cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); ++ val &= 0xffff; ++ ++ return ((val << 32) | readl(cns3xxx_tmr1 + TIMER_FREERUN_OFFSET)); ++} ++ ++static struct clocksource clocksource_cns3xxx = { ++ .name = "freerun", ++ .rating = 200, ++ .read = cns3xxx_get_cycles, ++ .mask = CLOCKSOURCE_MASK(48), ++ .shift = 16, ++ .flags = CLOCK_SOURCE_IS_CONTINUOUS, ++}; ++ ++static void __init cns3xxx_clocksource_init(void) ++{ ++ /* Reset the FreeRunning counter */ ++ writel((1 << 16), cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); ++ ++ clocksource_cns3xxx.mult = ++ clocksource_khz2mult(100, clocksource_cns3xxx.shift); ++ clocksource_register(&clocksource_cns3xxx); ++} ++ + /* + * Set up the clock source and clock events devices + */ +@@ -232,13 +262,12 @@ static void __init __cns3xxx_timer_init( + /* stop free running timer3 */ + writel(0, cns3xxx_tmr1 + TIMER_FREERUN_CONTROL_OFFSET); + +- /* timer1 */ +- writel(0x5C800, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET); +- writel(0x5C800, cns3xxx_tmr1 + TIMER1_AUTO_RELOAD_OFFSET); +- + writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V1_OFFSET); + writel(0, cns3xxx_tmr1 + TIMER1_MATCH_V2_OFFSET); + ++ val = (cns3xxx_cpu_clock() >> 3) * 1000000 / HZ; ++ writel(val, cns3xxx_tmr1 + TIMER1_COUNTER_OFFSET); ++ + /* mask irq, non-mask timer1 overflow */ + irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); + irq_mask &= ~(1 << 2); +@@ -250,23 +279,9 @@ static void __init __cns3xxx_timer_init( + val |= (1 << 9); + writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); + +- /* timer2 */ +- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V1_OFFSET); +- writel(0, cns3xxx_tmr1 + TIMER2_MATCH_V2_OFFSET); +- +- /* mask irq */ +- irq_mask = readl(cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); +- irq_mask |= ((1 << 3) | (1 << 4) | (1 << 5)); +- writel(irq_mask, cns3xxx_tmr1 + TIMER1_2_INTERRUPT_MASK_OFFSET); +- +- /* down counter */ +- val = readl(cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); +- val |= (1 << 10); +- writel(val, cns3xxx_tmr1 + TIMER1_2_CONTROL_OFFSET); +- +- /* Make irqs happen for the system timer */ + setup_irq(timer_irq, &cns3xxx_timer_irq); + ++ cns3xxx_clocksource_init(); + cns3xxx_clockevents_init(timer_irq); + cns3xxx_init_twd(); + } diff --git a/target/linux/cns3xxx/patches-3.18/095-gpio_support.patch b/target/linux/cns3xxx/patches-3.18/095-gpio_support.patch new file mode 100644 index 0000000000..a6ce177493 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/095-gpio_support.patch @@ -0,0 +1,67 @@ +--- a/arch/arm/mach-cns3xxx/cns3420vb.c ++++ b/arch/arm/mach-cns3xxx/cns3420vb.c +@@ -245,6 +245,10 @@ static void __init cns3420_init(void) + + cns3xxx_ahci_init(); + cns3xxx_sdhci_init(); ++ cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA, ++ NR_IRQS_CNS3XXX); ++ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB, ++ NR_IRQS_CNS3XXX + 32); + + pm_power_off = cns3xxx_power_off; + } +--- a/arch/arm/mach-cns3xxx/Kconfig ++++ b/arch/arm/mach-cns3xxx/Kconfig +@@ -1,6 +1,8 @@ + menuconfig ARCH_CNS3XXX + bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6 + select ARM_GIC ++ select ARCH_REQUIRE_GPIOLIB ++ select GENERIC_IRQ_CHIP + select PCI_DOMAINS if PCI + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if LOCAL_TIMERS +--- a/arch/arm/mach-cns3xxx/Makefile ++++ b/arch/arm/mach-cns3xxx/Makefile +@@ -1,7 +1,7 @@ + ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include + + obj-$(CONFIG_ARCH_CNS3XXX) += cns3xxx.o +-cns3xxx-y += core.o pm.o ++cns3xxx-y += core.o pm.o gpio.o + cns3xxx-$(CONFIG_ATAGS) += devices.o + cns3xxx-$(CONFIG_PCI) += pcie.o + cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o +--- a/arch/arm/mach-cns3xxx/cns3xxx.h ++++ b/arch/arm/mach-cns3xxx/cns3xxx.h +@@ -68,8 +68,10 @@ + #define SMC_PCELL_ID_3_OFFSET 0xFFC + + #define CNS3XXX_GPIOA_BASE 0x74000000 /* GPIO port A */ ++#define CNS3XXX_GPIOA_BASE_VIRT 0xFB006000 + + #define CNS3XXX_GPIOB_BASE 0x74800000 /* GPIO port B */ ++#define CNS3XXX_GPIOB_BASE_VIRT 0xFB007000 + + #define CNS3XXX_RTC_BASE 0x75000000 /* Real Time Clock */ + +--- a/arch/arm/mach-cns3xxx/core.c ++++ b/arch/arm/mach-cns3xxx/core.c +@@ -50,6 +50,16 @@ static struct map_desc cns3xxx_io_desc[] + .pfn = __phys_to_pfn(CNS3XXX_PM_BASE), + .length = SZ_4K, + .type = MT_DEVICE, ++ }, { ++ .virtual = CNS3XXX_GPIOA_BASE_VIRT, ++ .pfn = __phys_to_pfn(CNS3XXX_GPIOA_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE, ++ }, { ++ .virtual = CNS3XXX_GPIOB_BASE_VIRT, ++ .pfn = __phys_to_pfn(CNS3XXX_GPIOB_BASE), ++ .length = SZ_4K, ++ .type = MT_DEVICE, + #ifdef CONFIG_PCI + }, { + .virtual = CNS3XXX_PCIE0_HOST_BASE_VIRT, diff --git a/target/linux/cns3xxx/patches-3.18/097-l2x0_cmdline_disable.patch b/target/linux/cns3xxx/patches-3.18/097-l2x0_cmdline_disable.patch new file mode 100644 index 0000000000..f575348cba --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/097-l2x0_cmdline_disable.patch @@ -0,0 +1,69 @@ +--- a/arch/arm/mach-cns3xxx/core.c ++++ b/arch/arm/mach-cns3xxx/core.c +@@ -305,13 +305,26 @@ void __init cns3xxx_timer_init(void) + + #ifdef CONFIG_CACHE_L2X0 + +-void __init cns3xxx_l2x0_init(void) ++static int cns3xxx_l2x0_enable = 1; ++ ++static int __init cns3xxx_l2x0_disable(char *s) ++{ ++ cns3xxx_l2x0_enable = 0; ++ return 1; ++} ++__setup("nol2x0", cns3xxx_l2x0_disable); ++ ++static int __init cns3xxx_l2x0_init(void) + { +- void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); ++ void __iomem *base; + u32 val; + ++ if (!cns3xxx_l2x0_enable) ++ return 0; ++ ++ base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); + if (WARN_ON(!base)) +- return; ++ return 0; + + /* + * Tag RAM Control register +@@ -341,7 +354,10 @@ void __init cns3xxx_l2x0_init(void) + + /* 32 KiB, 8-way, parity disable */ + l2x0_init(base, 0x00500000, 0xfe0f0fff); ++ ++ return 0; + } ++arch_initcall(cns3xxx_l2x0_init); + + #endif /* CONFIG_CACHE_L2X0 */ + +--- a/arch/arm/mach-cns3xxx/cns3420vb.c ++++ b/arch/arm/mach-cns3xxx/cns3420vb.c +@@ -239,8 +239,6 @@ static struct platform_device *cns3420_p + + static void __init cns3420_init(void) + { +- cns3xxx_l2x0_init(); +- + platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); + + cns3xxx_ahci_init(); +--- a/arch/arm/mach-cns3xxx/core.h ++++ b/arch/arm/mach-cns3xxx/core.h +@@ -16,12 +16,6 @@ + extern struct smp_operations cns3xxx_smp_ops; + extern void cns3xxx_timer_init(void); + +-#ifdef CONFIG_CACHE_L2X0 +-void __init cns3xxx_l2x0_init(void); +-#else +-static inline void cns3xxx_l2x0_init(void) {} +-#endif /* CONFIG_CACHE_L2X0 */ +- + #ifdef CONFIG_PCI + extern void __init cns3xxx_pcie_init_late(void); + #else diff --git a/target/linux/cns3xxx/patches-3.18/100-laguna_support.patch b/target/linux/cns3xxx/patches-3.18/100-laguna_support.patch new file mode 100644 index 0000000000..3c0bba4316 --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/100-laguna_support.patch @@ -0,0 +1,46 @@ +--- a/arch/arm/mach-cns3xxx/Kconfig ++++ b/arch/arm/mach-cns3xxx/Kconfig +@@ -22,4 +22,12 @@ config MACH_CNS3420VB + This is a platform with an on-board ARM11 MPCore and has support + for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, etc. + ++config MACH_GW2388 ++ bool "Support for Gateworks Laguna Platform" ++ help ++ Include support for the Gateworks Laguna Platform ++ ++ This is a platform with an on-board ARM11 MPCore and has support ++ for USB, USB-OTG, MMC/SD/SDIO, SATA, PCI-E, I2C, GIG, etc. ++ + endif +--- a/arch/arm/mach-cns3xxx/Makefile ++++ b/arch/arm/mach-cns3xxx/Makefile +@@ -7,3 +7,5 @@ cns3xxx-$(CONFIG_PCI) += pcie.o + cns3xxx-$(CONFIG_MACH_CNS3420VB) += cns3420vb.o + cns3xxx-$(CONFIG_SMP) += platsmp.o headsmp.o cns3xxx_fiq.o + cns3xxx-$(CONFIG_HOTPLUG_CPU) += hotplug.o ++cns3xxx-$(CONFIG_MACH_GW2388) += laguna.o ++ +--- a/arch/arm/mach-cns3xxx/devices.c ++++ b/arch/arm/mach-cns3xxx/devices.c +@@ -16,6 +16,7 @@ + #include <linux/compiler.h> + #include <linux/dma-mapping.h> + #include <linux/platform_device.h> ++#include <asm/mach-types.h> + #include "cns3xxx.h" + #include "pm.h" + #include "core.h" +@@ -101,7 +102,11 @@ void __init cns3xxx_sdhci_init(void) + u32 gpioa_pins = __raw_readl(gpioa); + + /* MMC/SD pins share with GPIOA */ +- gpioa_pins |= 0x1fff0004; ++ if (machine_is_gw2388()) { ++ gpioa_pins |= 0x1fff0000; ++ } else { ++ gpioa_pins |= 0x1fff0004; ++ } + __raw_writel(gpioa_pins, gpioa); + + cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); diff --git a/target/linux/cns3xxx/patches-3.18/101-laguna_sdhci_card_detect.patch b/target/linux/cns3xxx/patches-3.18/101-laguna_sdhci_card_detect.patch new file mode 100644 index 0000000000..72648a5f9f --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/101-laguna_sdhci_card_detect.patch @@ -0,0 +1,14 @@ +--- a/drivers/mmc/host/sdhci-cns3xxx.c ++++ b/drivers/mmc/host/sdhci-cns3xxx.c +@@ -88,9 +88,9 @@ static const struct sdhci_pltfm_data sdh + .ops = &sdhci_cns3xxx_ops, + .quirks = SDHCI_QUIRK_BROKEN_DMA | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | +- SDHCI_QUIRK_INVERTED_WRITE_PROTECT | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | +- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, ++ SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | ++ SDHCI_QUIRK_BROKEN_CARD_DETECTION, + }; + + static int sdhci_cns3xxx_probe(struct platform_device *pdev) diff --git a/target/linux/cns3xxx/patches-3.18/110-pci_isolated_interrupts.patch b/target/linux/cns3xxx/patches-3.18/110-pci_isolated_interrupts.patch new file mode 100644 index 0000000000..b7e07ff22a --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/110-pci_isolated_interrupts.patch @@ -0,0 +1,188 @@ +--- a/arch/arm/mach-cns3xxx/laguna.c ++++ b/arch/arm/mach-cns3xxx/laguna.c +@@ -21,6 +21,7 @@ + #include <linux/kernel.h> + #include <linux/compiler.h> + #include <linux/io.h> ++#include <linux/irq.h> + #include <linux/gpio.h> + #include <linux/dma-mapping.h> + #include <linux/serial_core.h> +@@ -872,6 +873,47 @@ static int laguna_register_gpio(struct g + return ret; + } + ++/* allow disabling of external isolated PCIe IRQs */ ++static int cns3xxx_pciextirq = 1; ++static int __init cns3xxx_pciextirq_disable(char *s) ++{ ++ cns3xxx_pciextirq = 0; ++ return 1; ++} ++__setup("noextirq", cns3xxx_pciextirq_disable); ++ ++static int __init laguna_pcie_init_irq(void) ++{ ++ u32 __iomem *mem = (void __iomem *)(CNS3XXX_GPIOB_BASE_VIRT + 0x0004); ++ u32 reg = (__raw_readl(mem) >> 26) & 0xf; ++ int irqs[] = { ++ IRQ_CNS3XXX_EXTERNAL_PIN0, ++ IRQ_CNS3XXX_EXTERNAL_PIN1, ++ IRQ_CNS3XXX_EXTERNAL_PIN2, ++ 154, ++ }; ++ ++ if (!machine_is_gw2388()) ++ return 0; ++ ++ /* Verify GPIOB[26:29] == 0001b indicating support for ext irqs */ ++ if (cns3xxx_pciextirq && reg != 1) ++ cns3xxx_pciextirq = 0; ++ ++ if (cns3xxx_pciextirq) { ++ printk("laguna: using isolated PCI interrupts:" ++ " irq%d/irq%d/irq%d/irq%d\n", ++ irqs[0], irqs[1], irqs[2], irqs[3]); ++ cns3xxx_pcie_set_irqs(0, irqs); ++ } else { ++ printk("laguna: using shared PCI interrupts: irq%d\n", ++ IRQ_CNS3XXX_PCIE0_DEVICE); ++ } ++ ++ return 0; ++} ++subsys_initcall(laguna_pcie_init_irq); ++ + static int __init laguna_model_setup(void) + { + u32 __iomem *mem; +@@ -883,8 +925,33 @@ static int __init laguna_model_setup(voi + printk("Running on Gateworks Laguna %s\n", laguna_info.model); + cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA, + NR_IRQS_CNS3XXX); +- cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, IRQ_CNS3XXX_GPIOB, +- NR_IRQS_CNS3XXX + 32); ++ ++ /* ++ * If pcie external interrupts are supported and desired ++ * configure IRQ types and configure pin function. ++ * Note that cns3xxx_pciextirq is enabled by default, but can be ++ * unset via the 'noextirq' kernel param or by laguna_pcie_init() if ++ * the baseboard model does not support this hardware feature. ++ */ ++ if (cns3xxx_pciextirq) { ++ mem = (void __iomem *)(CNS3XXX_MISC_BASE_VIRT + 0x0018); ++ reg = __raw_readl(mem); ++ /* GPIO26 is gpio, EXT_INT[0:2] not gpio func */ ++ reg &= ~0x3c000000; ++ reg |= 0x38000000; ++ __raw_writel(reg, mem); ++ ++ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, ++ IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32); ++ ++ irq_set_irq_type(154, IRQ_TYPE_LEVEL_LOW); ++ irq_set_irq_type(93, IRQ_TYPE_LEVEL_HIGH); ++ irq_set_irq_type(94, IRQ_TYPE_LEVEL_HIGH); ++ irq_set_irq_type(95, IRQ_TYPE_LEVEL_HIGH); ++ } else { ++ cns3xxx_gpio_init(32, 32, CNS3XXX_GPIOB_BASE_VIRT, ++ IRQ_CNS3XXX_GPIOB, NR_IRQS_CNS3XXX + 32); ++ } + + if (strncmp(laguna_info.model, "GW", 2) == 0) { + if (laguna_info.config_bitmap & ETH0_LOAD) +--- a/arch/arm/mach-cns3xxx/pcie.c ++++ b/arch/arm/mach-cns3xxx/pcie.c +@@ -18,6 +18,7 @@ + #include <linux/io.h> + #include <linux/ioport.h> + #include <linux/interrupt.h> ++#include <linux/irq.h> + #include <linux/ptrace.h> + #include <asm/mach/map.h> + #include "cns3xxx.h" +@@ -27,7 +28,7 @@ struct cns3xxx_pcie { + void __iomem *host_regs; /* PCI config registers for host bridge */ + void __iomem *cfg0_regs; /* PCI Type 0 config registers */ + void __iomem *cfg1_regs; /* PCI Type 1 config registers */ +- unsigned int irqs[2]; ++ unsigned int irqs[5]; + struct resource res_io; + struct resource res_mem; + struct hw_pci hw_pci; +@@ -97,7 +98,7 @@ static inline int check_master_abort(str + void __iomem *host_base; + u32 sreg, ereg; + +- host_base = (void __iomem *) cnspci->cfg_bases[CNS3XXX_HOST_TYPE].virtual; ++ host_base = (void __iomem *) cnspci->host_regs; + sreg = __raw_readw(host_base + 0x6) & 0xF900; + ereg = __raw_readl(host_base + 0x104); // Uncorrectable Error Status Reg + +@@ -251,7 +252,7 @@ static struct pci_ops cns3xxx_pcie_ops = + static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) + { + struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); +- int irq = cnspci->irqs[!!dev->bus->number]; ++ int irq = cnspci->irqs[!!dev->bus->number + pin - 1]; + + pr_info("PCIe map irq: %04d:%02x:%02x.%02x slot %d, pin %d, irq: %d\n", + pci_domain_nr(dev->bus), dev->bus->number, PCI_SLOT(dev->devfn), +@@ -277,7 +278,12 @@ static struct cns3xxx_pcie cns3xxx_pcie[ + .end = CNS3XXX_PCIE0_HOST_BASE - 1, /* 176 MiB */ + .flags = IORESOURCE_MEM, + }, +- .irqs = { IRQ_CNS3XXX_PCIE0_RC, IRQ_CNS3XXX_PCIE0_DEVICE, }, ++ .irqs = { IRQ_CNS3XXX_PCIE0_RC, ++ IRQ_CNS3XXX_PCIE0_DEVICE, ++ IRQ_CNS3XXX_PCIE0_DEVICE, ++ IRQ_CNS3XXX_PCIE0_DEVICE, ++ IRQ_CNS3XXX_PCIE0_DEVICE, ++ }, + .hw_pci = { + .domain = 0, + .nr_controllers = 1, +@@ -302,7 +308,13 @@ static struct cns3xxx_pcie cns3xxx_pcie[ + .end = CNS3XXX_PCIE1_HOST_BASE - 1, /* 176 MiB */ + .flags = IORESOURCE_MEM, + }, +- .irqs = { IRQ_CNS3XXX_PCIE1_RC, IRQ_CNS3XXX_PCIE1_DEVICE, }, ++ .irqs = { ++ IRQ_CNS3XXX_PCIE1_RC, ++ IRQ_CNS3XXX_PCIE1_DEVICE, ++ IRQ_CNS3XXX_PCIE1_DEVICE, ++ IRQ_CNS3XXX_PCIE1_DEVICE, ++ IRQ_CNS3XXX_PCIE1_DEVICE, ++ }, + .hw_pci = { + .domain = 1, + .nr_controllers = 1, +@@ -412,6 +424,14 @@ static int cns3xxx_pcie_abort_handler(un + return 0; + } + ++void __init cns3xxx_pcie_set_irqs(int bus, int *irqs) ++{ ++ int i; ++ ++ for (i = 0; i < 4; i++) ++ cns3xxx_pcie[bus].irqs[i + 1] = irqs[i]; ++} ++ + void __init cns3xxx_pcie_init_late(void) + { + int i; +--- a/arch/arm/mach-cns3xxx/core.h ++++ b/arch/arm/mach-cns3xxx/core.h +@@ -18,8 +18,10 @@ extern void cns3xxx_timer_init(void); + + #ifdef CONFIG_PCI + extern void __init cns3xxx_pcie_init_late(void); ++extern void __init cns3xxx_pcie_set_irqs(int bus, int *irqs); + #else + static inline void __init cns3xxx_pcie_init_late(void) {} ++static inline void cns3xxx_pcie_set_irqs(int bus, int *irqs) {} + #endif + + void __init cns3xxx_map_io(void); diff --git a/target/linux/cns3xxx/patches-3.18/200-broadcom_phy_reinit.patch b/target/linux/cns3xxx/patches-3.18/200-broadcom_phy_reinit.patch new file mode 100644 index 0000000000..e4cc27829e --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/200-broadcom_phy_reinit.patch @@ -0,0 +1,14 @@ +--- a/drivers/net/phy/broadcom.c ++++ b/drivers/net/phy/broadcom.c +@@ -393,6 +393,11 @@ static int bcm5481_config_aneg(struct ph + /* Write bits 14:0. */ + reg |= (1 << 15); + phy_write(phydev, 0x18, reg); ++ } else { ++ phy_write(phydev, 0x18, 0xf1e7); ++ phy_write(phydev, 0x1c, 0x8e00); ++ ++ phy_write(phydev, 0x1c, 0xa41f); + } + + return ret; diff --git a/target/linux/cns3xxx/patches-3.18/210-dwc2_defaults.patch b/target/linux/cns3xxx/patches-3.18/210-dwc2_defaults.patch new file mode 100644 index 0000000000..e9c71a1d8e --- /dev/null +++ b/target/linux/cns3xxx/patches-3.18/210-dwc2_defaults.patch @@ -0,0 +1,47 @@ +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -105,6 +105,34 @@ static const struct dwc2_core_params par + .uframe_sched = -1, + }; + ++static const struct dwc2_core_params params_cns3xxx = { ++ .otg_cap = 2, /* non-HNP/non-SRP capable */ ++ .otg_ver = 0, /* 1.3 */ ++ .dma_enable = 1, ++ .dma_desc_enable = 0, ++ .speed = 0, /* High Speed */ ++ .enable_dynamic_fifo = 1, ++ .en_multiple_tx_fifo = 1, ++ .host_rx_fifo_size = 658, /* 774 DWORDs */ ++ .host_nperio_tx_fifo_size = 128, /* 256 DWORDs */ ++ .host_perio_tx_fifo_size = 658, /* 512 DWORDs */ ++ .max_transfer_size = 65535, ++ .max_packet_count = 511, ++ .host_channels = 16, ++ .phy_type = 1, /* UTMI */ ++ .phy_utmi_width = 16, /* 8 bits */ ++ .phy_ulpi_ddr = 0, /* Single */ ++ .phy_ulpi_ext_vbus = 0, ++ .i2c_enable = 0, ++ .ulpi_fs_ls = 0, ++ .host_support_fs_ls_low_power = 0, ++ .host_ls_low_power_phy_clk = 0, /* 48 MHz */ ++ .ts_dline = 0, ++ .reload_ctl = 0, ++ .ahbcfg = 0x10, ++ .uframe_sched = 0, ++}; ++ + /** + * dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the + * DWC_otg driver +@@ -165,6 +193,9 @@ static int dwc2_driver_probe(struct plat + /* Default all params to autodetect */ + dwc2_set_all_params(&defparams, -1); + params = &defparams; ++#ifdef CONFIG_ARCH_CNS3XXX ++ params = ¶ms_cns3xxx; ++#endif + + /* + * Disable descriptor dma mode by default as the HW can support |