diff options
Diffstat (limited to 'target/linux/cns21xx/patches-2.6.36/301-cns21xx-mach-ns-k330.patch')
| -rw-r--r-- | target/linux/cns21xx/patches-2.6.36/301-cns21xx-mach-ns-k330.patch | 242 |
1 files changed, 0 insertions, 242 deletions
diff --git a/target/linux/cns21xx/patches-2.6.36/301-cns21xx-mach-ns-k330.patch b/target/linux/cns21xx/patches-2.6.36/301-cns21xx-mach-ns-k330.patch deleted file mode 100644 index 69bed92020..0000000000 --- a/target/linux/cns21xx/patches-2.6.36/301-cns21xx-mach-ns-k330.patch +++ /dev/null @@ -1,242 +0,0 @@ ---- a/arch/arm/mach-cns21xx/Kconfig -+++ b/arch/arm/mach-cns21xx/Kconfig -@@ -1,6 +1,16 @@ - if ARCH_CNS21XX - - menu "Cavium Networks CNS21xx based machines" -+ -+config MACH_NS_K330 -+ bool "NS-K330 NAS" -+ select CNS21XX_DEV_GEC -+ select CNS21XX_DEV_SPI_MASTER -+ select CNS21XX_DEV_USB -+ help -+ Say Y here if you intend to run this kernel on the -+ NS-K330 NAS board. -+ - endmenu - - config CNS21XX_DEV_GEC ---- /dev/null -+++ b/arch/arm/mach-cns21xx/mach-ns-k330.c -@@ -0,0 +1,212 @@ -+/* -+ * NS-K330 NAS board support -+ * -+ * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This file is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License, Version 2, as -+ * published by the Free Software Foundation. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/map.h> -+#include <linux/mtd/partitions.h> -+#include <linux/spi/spi.h> -+#include <linux/spi/flash.h> -+#include <linux/platform_device.h> -+#include <linux/gpio.h> -+#include <linux/leds.h> -+#include <linux/gpio_keys.h> -+#include <linux/input.h> -+ -+#include <asm/setup.h> -+#include <asm/mach-types.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/time.h> -+#include <mach/hardware.h> -+#include <mach/cns21xx.h> -+#include <mach/cns21xx_misc.h> -+ -+#include "common.h" -+#include "dev-gec.h" -+ -+#define NS_K330_GPIO_LED_LINK 1 -+#define NS_K330_GPIO_LED_USB1 16 -+#define NS_K330_GPIO_LED_USB2 17 -+#define NS_K330_GPIO_LED_ETH_GREEN 22 -+#define NS_K330_GPIO_LED_ETH_ORANGE 23 -+ -+#define NS_K330_GPIO_BTN_RESET 13 -+#define NS_K330_GPIO_BTN_USB1 14 -+#define NS_K330_GPIO_BTN_USB2 15 -+ -+#ifdef CONFIG_MTD_PARTITIONS -+static struct mtd_partition ns_k330_partitions[] = { -+ { -+ .name = "boot", -+ .offset = 0x0, -+ .size = 0x040000, -+ .mask_flags = MTD_WRITEABLE, -+ }, { -+ .name = "config", -+ .offset = 0x040000, -+ .size = 0x020000, -+ .mask_flags = MTD_WRITEABLE, -+ }, { -+ .name = "kernel", -+ .offset = 0x060000, -+ .size = 0x100000, -+ }, { -+ .name = "rootfs", -+ .offset = 0x160000, -+ .size = 0x290000, -+ }, { -+ .name = "firmware", -+ .offset = 0x060000, -+ .size = 0x390000, -+ }, -+}; -+#else -+#define ns_k330_partitions NULL -+#define ns_k330_num_partitions 0 -+#endif /* CONFIG_MTD_PARTITIONS */ -+ -+static struct flash_platform_data ns_k330_flash_data = { -+ .parts = ns_k330_partitions, -+ .nr_parts = ARRAY_SIZE(ns_k330_partitions), -+}; -+ -+static struct spi_board_info ns_k330_spi_board_info[] = { -+ { -+ .bus_num = 0, -+ .chip_select = 0, -+ .max_speed_hz = 25000000, -+ .modalias = "m25p80", -+ .platform_data = &ns_k330_flash_data, -+ } -+}; -+ -+static struct gpio_led ns_k330_gpio_leds[] = { -+ { -+ .name = "ns-k330:red:link", -+ .gpio = NS_K330_GPIO_LED_LINK, -+ .active_low = 1, -+ }, { -+ .name = "ns-k330:green:usb1", -+ .gpio = NS_K330_GPIO_LED_USB1, -+ .active_low = 1, -+ }, { -+ .name = "ns-k330:green:usb2", -+ .gpio = NS_K330_GPIO_LED_USB2, -+ .active_low = 1, -+ }, { -+ .name = "ns-k330:green:eth", -+ .gpio = NS_K330_GPIO_LED_ETH_GREEN, -+ .active_low = 1, -+ }, { -+ .name = "ns-k330:orange:eth", -+ .gpio = NS_K330_GPIO_LED_ETH_ORANGE, -+ .active_low = 1, -+ } -+}; -+ -+static struct gpio_led_platform_data ns_k330_gpio_leds_data = { -+ .num_leds = ARRAY_SIZE(ns_k330_gpio_leds), -+ .leds = ns_k330_gpio_leds, -+}; -+ -+static struct platform_device ns_k330_gpio_leds_device = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev.platform_data = &ns_k330_gpio_leds_data, -+}; -+ -+static struct gpio_keys_button ns_k330_gpio_keys[] = { -+ { -+ .code = KEY_RESTART, -+ .gpio = NS_K330_GPIO_BTN_RESET, -+ .desc = "Reset Button", -+ .active_low = 1, -+ }, -+ { -+ .code = BTN_0, -+ .gpio = NS_K330_GPIO_BTN_USB1, -+ .desc = "USB1 Button", -+ .active_low = 1, -+ }, -+ { -+ .code = BTN_1, -+ .gpio = NS_K330_GPIO_BTN_USB2, -+ .desc = "USB2 Button", -+ .active_low = 0, -+ }, -+}; -+ -+static struct gpio_keys_platform_data ns_k330_gpio_keys_data = { -+ .buttons = ns_k330_gpio_keys, -+ .nbuttons = ARRAY_SIZE(ns_k330_gpio_keys), -+}; -+ -+static struct platform_device ns_k330_gpio_keys_device = { -+ .name = "gpio-keys", -+ .id = -1, -+ .num_resources = 0, -+ .dev = { -+ .platform_data = &ns_k330_gpio_keys_data, -+ }, -+}; -+ -+static void __init ns_k330_fixup(struct machine_desc *desc, -+ struct tag *tags, char **cmdline, -+ struct meminfo *mi) -+{ -+ struct tag *t; -+ -+ /* The board has 32MB of RAM mapped at 0. */ -+ mi->nr_banks = 1; -+ mi->bank[0].start = 0; -+ mi->bank[0].size = SZ_32M; -+ -+ for (t = tags; t->hdr.size; t = tag_next(t)) { -+ switch (t->hdr.tag) { -+ case ATAG_CORE: -+ if (t->u.core.rootdev == 255) -+ t->u.core.rootdev = 0; -+ break; -+ } -+ } -+} -+ -+static void __init ns_k330_init(void) -+{ -+ cns21xx_gpio_init(); -+ -+ HAL_MISC_DISABLE_LED012_PINS(); -+ HAL_MISC_DISABLE_I2C_PINS(); -+ HAL_MISC_DISABLE_I2S_PINS(); -+ -+ cns21xx_register_uart0(); -+ cns21xx_register_wdt(); -+ cns21xx_register_usb(); -+ cns21xx_register_spi_master(-1, ns_k330_spi_board_info, -+ ARRAY_SIZE(ns_k330_spi_board_info)); -+ -+ cns21xx_gec_data.phy_type = CNS21XX_GEC_PHY_TYPE_INTERNAL; -+ cns21xx_register_gec(); -+ -+ platform_device_register(&ns_k330_gpio_leds_device); -+ platform_device_register(&ns_k330_gpio_keys_device); -+} -+ -+MACHINE_START(NS_K330, "NS-K330 NAS") -+ .phys_io = CNS21XX_PHYS_IO, -+ .io_pg_offst = CNS21XX_IO_PAGE_OFFSET, -+ .boot_params = 0x100, -+ .fixup = ns_k330_fixup, -+ .map_io = cns21xx_map_io, -+ .init_irq = cns21xx_init_irq, -+ .timer = &cns21xx_timer, -+ .init_machine = ns_k330_init, -+MACHINE_END ---- a/arch/arm/mach-cns21xx/Makefile -+++ b/arch/arm/mach-cns21xx/Makefile -@@ -12,4 +12,4 @@ obj-$(CONFIG_CNS21XX_DEV_USB) += dev-us - obj-$(CONFIG_CNS21XX_DEV_SPI_MASTER) += dev-spi-master.o - - # machine specific files -- -+obj-$(CONFIG_MACH_NS_K330) += mach-ns-k330.o |