aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/patches-4.4
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx/patches-4.4')
-rw-r--r--target/linux/brcm63xx/patches-4.4/001-4.12-07-mdio_bus-Issue-GPIO-RESET-to-PHYs.patch192
-rw-r--r--target/linux/brcm63xx/patches-4.4/001-4.12-08-net-phy-Call-bus-reset-after-releasing-PHYs-from-res.patch43
-rw-r--r--target/linux/brcm63xx/patches-4.4/001-4.13-02-mdio_bus-handle-only-single-PHY-reset-GPIO.patch120
-rw-r--r--target/linux/brcm63xx/patches-4.4/001-4.13-03-mdio_bus-use-devm_gpiod_get_optional.patch39
-rw-r--r--target/linux/brcm63xx/patches-4.4/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch46
-rw-r--r--target/linux/brcm63xx/patches-4.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch2
-rw-r--r--target/linux/brcm63xx/patches-4.4/381-net-bcm63xx_enet-fully-reset-ephy.patch28
-rw-r--r--target/linux/brcm63xx/patches-4.4/402_bcm63xx_enet_vlan_incoming_fixed.patch2
-rw-r--r--target/linux/brcm63xx/patches-4.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch18
-rw-r--r--target/linux/brcm63xx/patches-4.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch2
-rw-r--r--target/linux/brcm63xx/patches-4.4/423-bcm63xx_enet_add_b53_support.patch16
-rw-r--r--target/linux/brcm63xx/patches-4.4/424-bcm63xx_enet_no_request_mem_region.patch2
-rw-r--r--target/linux/brcm63xx/patches-4.4/804-bcm63xx_enet_63268_rgmii_ports.patch2
13 files changed, 416 insertions, 96 deletions
diff --git a/target/linux/brcm63xx/patches-4.4/001-4.12-07-mdio_bus-Issue-GPIO-RESET-to-PHYs.patch b/target/linux/brcm63xx/patches-4.4/001-4.12-07-mdio_bus-Issue-GPIO-RESET-to-PHYs.patch
new file mode 100644
index 0000000000..2deeb7b816
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/001-4.12-07-mdio_bus-Issue-GPIO-RESET-to-PHYs.patch
@@ -0,0 +1,192 @@
+From 69226896ad636b94f6d2e55d75ff21a29c4de83b Mon Sep 17 00:00:00 2001
+From: Roger Quadros <rogerq@ti.com>
+Date: Fri, 21 Apr 2017 16:15:38 +0300
+Subject: [PATCH] mdio_bus: Issue GPIO RESET to PHYs.
+
+Some boards [1] leave the PHYs at an invalid state
+during system power-up or reset thus causing unreliability
+issues with the PHY which manifests as PHY not being detected
+or link not functional. To fix this, these PHYs need to be RESET
+via a GPIO connected to the PHY's RESET pin.
+
+Some boards have a single GPIO controlling the PHY RESET pin of all
+PHYs on the bus whereas some others have separate GPIOs controlling
+individual PHY RESETs.
+
+In both cases, the RESET de-assertion cannot be done in the PHY driver
+as the PHY will not probe till its reset is de-asserted.
+So do the RESET de-assertion in the MDIO bus driver.
+
+[1] - am572x-idk, am571x-idk, a437x-idk
+
+Signed-off-by: Roger Quadros <rogerq@ti.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ Documentation/devicetree/bindings/net/mdio.txt | 33 ++++++++++++++++++
+ drivers/net/phy/mdio_bus.c | 47 ++++++++++++++++++++++++++
+ drivers/of/of_mdio.c | 7 ++++
+ include/linux/phy.h | 7 ++++
+ 4 files changed, 94 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/net/mdio.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/mdio.txt
+@@ -0,0 +1,33 @@
++Common MDIO bus properties.
++
++These are generic properties that can apply to any MDIO bus.
++
++Optional properties:
++- reset-gpios: List of one or more GPIOs that control the RESET lines
++ of the PHYs on that MDIO bus.
++- reset-delay-us: RESET pulse width in microseconds as per PHY datasheet.
++
++A list of child nodes, one per device on the bus is expected. These
++should follow the generic phy.txt, or a device specific binding document.
++
++Example :
++This example shows these optional properties, plus other properties
++required for the TI Davinci MDIO driver.
++
++ davinci_mdio: ethernet@0x5c030000 {
++ compatible = "ti,davinci_mdio";
++ reg = <0x5c030000 0x1000>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
++ reset-delay-us = <2>; /* PHY datasheet states 1us min */
++
++ ethphy0: ethernet-phy@1 {
++ reg = <1>;
++ };
++
++ ethphy1: ethernet-phy@3 {
++ reg = <3>;
++ };
++ };
+--- a/drivers/net/phy/mdio_bus.c
++++ b/drivers/net/phy/mdio_bus.c
+@@ -22,8 +22,11 @@
+ #include <linux/init.h>
+ #include <linux/delay.h>
+ #include <linux/device.h>
++#include <linux/gpio.h>
++#include <linux/gpio/consumer.h>
+ #include <linux/of_device.h>
+ #include <linux/of_mdio.h>
++#include <linux/of_gpio.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+ #include <linux/skbuff.h>
+@@ -252,6 +255,7 @@ static inline void of_mdiobus_link_phyde
+ int __mdiobus_register(struct mii_bus *bus, struct module *owner)
+ {
+ int i, err;
++ struct gpio_desc *gpiod;
+
+ if (NULL == bus || NULL == bus->name ||
+ NULL == bus->read || NULL == bus->write)
+@@ -278,6 +282,35 @@ int __mdiobus_register(struct mii_bus *b
+ if (bus->reset)
+ bus->reset(bus);
+
++ /* de-assert bus level PHY GPIO resets */
++ if (bus->num_reset_gpios > 0) {
++ bus->reset_gpiod = devm_kcalloc(&bus->dev,
++ bus->num_reset_gpios,
++ sizeof(struct gpio_desc *),
++ GFP_KERNEL);
++ if (!bus->reset_gpiod)
++ return -ENOMEM;
++ }
++
++ for (i = 0; i < bus->num_reset_gpios; i++) {
++ gpiod = devm_gpiod_get_index(&bus->dev, "reset", i,
++ GPIOD_OUT_LOW);
++ if (IS_ERR(gpiod)) {
++ err = PTR_ERR(gpiod);
++ if (err != -ENOENT) {
++ dev_err(&bus->dev,
++ "mii_bus %s couldn't get reset GPIO\n",
++ bus->id);
++ return err;
++ }
++ } else {
++ bus->reset_gpiod[i] = gpiod;
++ gpiod_set_value_cansleep(gpiod, 1);
++ udelay(bus->reset_delay_us);
++ gpiod_set_value_cansleep(gpiod, 0);
++ }
++ }
++
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if ((bus->phy_mask & (1 << i)) == 0) {
+ struct phy_device *phydev;
+@@ -302,6 +335,13 @@ error:
+ phy_device_free(phydev);
+ }
+ }
++
++ /* Put PHYs in RESET to save power */
++ for (i = 0; i < bus->num_reset_gpios; i++) {
++ if (bus->reset_gpiod[i])
++ gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
++ }
++
+ device_del(&bus->dev);
+ return err;
+ }
+@@ -321,6 +361,13 @@ void mdiobus_unregister(struct mii_bus *
+ phy_device_free(phydev);
+ }
+ }
++
++ /* Put PHYs in RESET to save power */
++ for (i = 0; i < bus->num_reset_gpios; i++) {
++ if (bus->reset_gpiod[i])
++ gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
++ }
++
+ device_del(&bus->dev);
+ }
+ EXPORT_SYMBOL(mdiobus_unregister);
+--- a/drivers/of/of_mdio.c
++++ b/drivers/of/of_mdio.c
+@@ -21,6 +21,8 @@
+ #include <linux/of_mdio.h>
+ #include <linux/module.h>
+
++#define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */
++
+ MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+ MODULE_LICENSE("GPL");
+
+@@ -140,6 +142,11 @@ int of_mdiobus_register(struct mii_bus *
+
+ mdio->dev.of_node = np;
+
++ /* Get bus level PHY reset GPIO details */
++ mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
++ of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
++ mdio->num_reset_gpios = of_gpio_named_count(np, "reset-gpios");
++
+ /* Register the MDIO bus */
+ rc = mdiobus_register(mdio);
+ if (rc)
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -191,6 +191,13 @@ struct mii_bus {
+ * interrupt at the index matching its address
+ */
+ int *irq;
++
++ /* GPIO reset pulse width in microseconds */
++ int reset_delay_us;
++ /* Number of reset GPIOs */
++ int num_reset_gpios;
++ /* Array of RESET GPIO descriptors */
++ struct gpio_desc **reset_gpiod;
+ };
+ #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
+
diff --git a/target/linux/brcm63xx/patches-4.4/001-4.12-08-net-phy-Call-bus-reset-after-releasing-PHYs-from-res.patch b/target/linux/brcm63xx/patches-4.4/001-4.12-08-net-phy-Call-bus-reset-after-releasing-PHYs-from-res.patch
new file mode 100644
index 0000000000..5788a37de6
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/001-4.12-08-net-phy-Call-bus-reset-after-releasing-PHYs-from-res.patch
@@ -0,0 +1,43 @@
+From df0c8d911abf6ba97b2c2fc3c5a12769e0b081a3 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Thu, 11 May 2017 11:24:16 -0700
+Subject: [PATCH] net: phy: Call bus->reset() after releasing PHYs from reset
+
+The API convention makes it that a given MDIO bus reset should be able
+to access PHY devices in its reset() callback and perform additional
+MDIO accesses in order to bring the bus and PHYs in a working state.
+
+Commit 69226896ad63 ("mdio_bus: Issue GPIO RESET to PHYs.") broke that
+contract by first calling bus->reset() and then release all PHYs from
+reset using their shared GPIO line, so restore the expected
+functionality here.
+
+Fixes: 69226896ad63 ("mdio_bus: Issue GPIO RESET to PHYs.")
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/mdio_bus.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/mdio_bus.c
++++ b/drivers/net/phy/mdio_bus.c
+@@ -279,9 +279,6 @@ int __mdiobus_register(struct mii_bus *b
+
+ mutex_init(&bus->mdio_lock);
+
+- if (bus->reset)
+- bus->reset(bus);
+-
+ /* de-assert bus level PHY GPIO resets */
+ if (bus->num_reset_gpios > 0) {
+ bus->reset_gpiod = devm_kcalloc(&bus->dev,
+@@ -311,6 +308,9 @@ int __mdiobus_register(struct mii_bus *b
+ }
+ }
+
++ if (bus->reset)
++ bus->reset(bus);
++
+ for (i = 0; i < PHY_MAX_ADDR; i++) {
+ if ((bus->phy_mask & (1 << i)) == 0) {
+ struct phy_device *phydev;
diff --git a/target/linux/brcm63xx/patches-4.4/001-4.13-02-mdio_bus-handle-only-single-PHY-reset-GPIO.patch b/target/linux/brcm63xx/patches-4.4/001-4.13-02-mdio_bus-handle-only-single-PHY-reset-GPIO.patch
new file mode 100644
index 0000000000..7a097c1b67
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/001-4.13-02-mdio_bus-handle-only-single-PHY-reset-GPIO.patch
@@ -0,0 +1,120 @@
+From d396e84c56047b303cac378dde4b2e5cc430b336 Mon Sep 17 00:00:00 2001
+From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Date: Mon, 12 Jun 2017 23:55:38 +0300
+Subject: [PATCH] mdio_bus: handle only single PHY reset GPIO
+
+Commit 4c5e7a2c0501 ("dt-bindings: mdio: Clarify binding document")
+declared that a MDIO reset GPIO property should have only a single GPIO
+reference/specifier, however the supporting code was left intact, still
+burdening the kernel with now apparently useless loops -- get rid of them.
+
+Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/mdio_bus.c | 53 +++++++++++++++++-----------------------------
+ drivers/of/of_mdio.c | 1 -
+ include/linux/phy.h | 6 ++----
+ 3 files changed, 21 insertions(+), 39 deletions(-)
+
+--- a/drivers/net/phy/mdio_bus.c
++++ b/drivers/net/phy/mdio_bus.c
+@@ -279,33 +279,22 @@ int __mdiobus_register(struct mii_bus *b
+
+ mutex_init(&bus->mdio_lock);
+
+- /* de-assert bus level PHY GPIO resets */
+- if (bus->num_reset_gpios > 0) {
+- bus->reset_gpiod = devm_kcalloc(&bus->dev,
+- bus->num_reset_gpios,
+- sizeof(struct gpio_desc *),
+- GFP_KERNEL);
+- if (!bus->reset_gpiod)
+- return -ENOMEM;
+- }
+-
+- for (i = 0; i < bus->num_reset_gpios; i++) {
+- gpiod = devm_gpiod_get_index(&bus->dev, "reset", i,
+- GPIOD_OUT_LOW);
+- if (IS_ERR(gpiod)) {
+- err = PTR_ERR(gpiod);
+- if (err != -ENOENT) {
+- dev_err(&bus->dev,
+- "mii_bus %s couldn't get reset GPIO\n",
+- bus->id);
+- return err;
+- }
+- } else {
+- bus->reset_gpiod[i] = gpiod;
+- gpiod_set_value_cansleep(gpiod, 1);
+- udelay(bus->reset_delay_us);
+- gpiod_set_value_cansleep(gpiod, 0);
++ /* de-assert bus level PHY GPIO reset */
++ gpiod = devm_gpiod_get(&bus->dev, "reset", GPIOD_OUT_LOW);
++ if (IS_ERR(gpiod)) {
++ err = PTR_ERR(gpiod);
++ if (err != -ENOENT) {
++ dev_err(&bus->dev,
++ "mii_bus %s couldn't get reset GPIO\n",
++ bus->id);
++ return err;
+ }
++ } else {
++ bus->reset_gpiod = gpiod;
++
++ gpiod_set_value_cansleep(gpiod, 1);
++ udelay(bus->reset_delay_us);
++ gpiod_set_value_cansleep(gpiod, 0);
+ }
+
+ if (bus->reset)
+@@ -337,10 +326,8 @@ error:
+ }
+
+ /* Put PHYs in RESET to save power */
+- for (i = 0; i < bus->num_reset_gpios; i++) {
+- if (bus->reset_gpiod[i])
+- gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
+- }
++ if (bus->reset_gpiod)
++ gpiod_set_value_cansleep(bus->reset_gpiod, 1);
+
+ device_del(&bus->dev);
+ return err;
+@@ -363,10 +350,8 @@ void mdiobus_unregister(struct mii_bus *
+ }
+
+ /* Put PHYs in RESET to save power */
+- for (i = 0; i < bus->num_reset_gpios; i++) {
+- if (bus->reset_gpiod[i])
+- gpiod_set_value_cansleep(bus->reset_gpiod[i], 1);
+- }
++ if (bus->reset_gpiod)
++ gpiod_set_value_cansleep(bus->reset_gpiod, 1);
+
+ device_del(&bus->dev);
+ }
+--- a/drivers/of/of_mdio.c
++++ b/drivers/of/of_mdio.c
+@@ -145,7 +145,6 @@ int of_mdiobus_register(struct mii_bus *
+ /* Get bus level PHY reset GPIO details */
+ mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY;
+ of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us);
+- mdio->num_reset_gpios = of_gpio_named_count(np, "reset-gpios");
+
+ /* Register the MDIO bus */
+ rc = mdiobus_register(mdio);
+--- a/include/linux/phy.h
++++ b/include/linux/phy.h
+@@ -194,10 +194,8 @@ struct mii_bus {
+
+ /* GPIO reset pulse width in microseconds */
+ int reset_delay_us;
+- /* Number of reset GPIOs */
+- int num_reset_gpios;
+- /* Array of RESET GPIO descriptors */
+- struct gpio_desc **reset_gpiod;
++ /* RESET GPIO descriptor pointer */
++ struct gpio_desc *reset_gpiod;
+ };
+ #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
+
diff --git a/target/linux/brcm63xx/patches-4.4/001-4.13-03-mdio_bus-use-devm_gpiod_get_optional.patch b/target/linux/brcm63xx/patches-4.4/001-4.13-03-mdio_bus-use-devm_gpiod_get_optional.patch
new file mode 100644
index 0000000000..d7ac6234cf
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/001-4.13-03-mdio_bus-use-devm_gpiod_get_optional.patch
@@ -0,0 +1,39 @@
+From fe0e4052fb11d5c713961ab7e136520be40052a3 Mon Sep 17 00:00:00 2001
+From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Date: Mon, 12 Jun 2017 23:55:39 +0300
+Subject: [PATCH] mdio_bus: use devm_gpiod_get_optional()
+
+The MDIO reset GPIO is really a classical optional GPIO property case,
+so devm_gpiod_get_optional() should have been used, not devm_gpiod_get().
+Doing this saves several LoCs...
+
+Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/phy/mdio_bus.c | 14 +++++---------
+ 1 file changed, 5 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/phy/mdio_bus.c
++++ b/drivers/net/phy/mdio_bus.c
+@@ -280,16 +280,12 @@ int __mdiobus_register(struct mii_bus *b
+ mutex_init(&bus->mdio_lock);
+
+ /* de-assert bus level PHY GPIO reset */
+- gpiod = devm_gpiod_get(&bus->dev, "reset", GPIOD_OUT_LOW);
++ gpiod = devm_gpiod_get_optional(&bus->dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(gpiod)) {
+- err = PTR_ERR(gpiod);
+- if (err != -ENOENT) {
+- dev_err(&bus->dev,
+- "mii_bus %s couldn't get reset GPIO\n",
+- bus->id);
+- return err;
+- }
+- } else {
++ dev_err(&bus->dev, "mii_bus %s couldn't get reset GPIO\n",
++ bus->id);
++ return PTR_ERR(gpiod);
++ } else if (gpiod) {
+ bus->reset_gpiod = gpiod;
+
+ gpiod_set_value_cansleep(gpiod, 1);
diff --git a/target/linux/brcm63xx/patches-4.4/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-4.4/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
deleted file mode 100644
index ca72bbf495..0000000000
--- a/target/linux/brcm63xx/patches-4.4/376-net-bcm63xx_enet-use-named-gpio-for-ephy-reset-gpio.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From ec905f2ea78ec40602a685ede31c5e4f9893d196 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 21 Feb 2015 16:35:07 +0100
-Subject: [PATCH 3/6] net: bcm63xx_enet: use named gpio for ephy reset gpio
-
-Allow using a named optional gpio for ephy reset gpio registration.
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/gpio/consumer.h>
-
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -2829,10 +2830,15 @@ static int bcm_enet_shared_probe(struct
- {
- struct resource *res;
- void __iomem *p[3];
-+ struct gpio_desc *ephy_reset;
- unsigned int i;
-
- memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
-
-+ ephy_reset = devm_gpiod_get_optional(&pdev->dev, "ephy-reset", GPIOD_ASIS);
-+ if (IS_ERR(ephy_reset))
-+ return PTR_ERR(ephy_reset);
-+
- for (i = 0; i < 3; i++) {
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- p[i] = devm_ioremap_resource(&pdev->dev, res);
-@@ -2842,6 +2848,9 @@ static int bcm_enet_shared_probe(struct
-
- memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
-
-+ if (ephy_reset)
-+ gpiod_direction_output(ephy_reset, 0);
-+
- return 0;
- }
-
diff --git a/target/linux/brcm63xx/patches-4.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch b/target/linux/brcm63xx/patches-4.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
index e71791fc66..2259b024ab 100644
--- a/target/linux/brcm63xx/patches-4.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
+++ b/target/linux/brcm63xx/patches-4.4/377-MIPS-BCM63XX-register-lookup-for-ephy-reset-gpio.patch
@@ -72,7 +72,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
}
+
+static struct gpiod_lookup_table ephy_reset = {
-+ .dev_id = "bcm63xx_enet_shared.0",
++ .dev_id = "bcm63xx_enet-0",
+ .table = {
+ { /* filled at runtime */ },
+ { },
diff --git a/target/linux/brcm63xx/patches-4.4/381-net-bcm63xx_enet-fully-reset-ephy.patch b/target/linux/brcm63xx/patches-4.4/381-net-bcm63xx_enet-fully-reset-ephy.patch
deleted file mode 100644
index c591243799..0000000000
--- a/target/linux/brcm63xx/patches-4.4/381-net-bcm63xx_enet-fully-reset-ephy.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Subject: [PATCH] net: bcm63xx_enet: fully reset ephy
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 4 ++--
- 1 file changed, 2 insertions(+), , 1 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2835,7 +2835,7 @@ static int bcm_enet_shared_probe(struct
-
- memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
-
-- ephy_reset = devm_gpiod_get_optional(&pdev->dev, "ephy-reset", GPIOD_ASIS);
-+ ephy_reset = devm_gpiod_get_optional(&pdev->dev, "ephy-reset", GPIOD_OUT_HIGH);
- if (IS_ERR(ephy_reset))
- return PTR_ERR(ephy_reset);
-
-@@ -2849,7 +2849,7 @@ static int bcm_enet_shared_probe(struct
- memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
-
- if (ephy_reset)
-- gpiod_direction_output(ephy_reset, 0);
-+ gpiod_set_value(ephy_reset, 0);
-
- return 0;
- }
diff --git a/target/linux/brcm63xx/patches-4.4/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-4.4/402_bcm63xx_enet_vlan_incoming_fixed.patch
index fc2e8ab7a7..8cb8099e97 100644
--- a/target/linux/brcm63xx/patches-4.4/402_bcm63xx_enet_vlan_incoming_fixed.patch
+++ b/target/linux/brcm63xx/patches-4.4/402_bcm63xx_enet_vlan_incoming_fixed.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1633,7 +1633,7 @@ static int compute_hw_mtu(struct bcm_ene
+@@ -1632,7 +1632,7 @@ static int compute_hw_mtu(struct bcm_ene
actual_mtu = mtu;
/* add ethernet header + vlan tag size */
diff --git a/target/linux/brcm63xx/patches-4.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-4.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
index 6bc62a0386..7c2b686a98 100644
--- a/target/linux/brcm63xx/patches-4.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ b/target/linux/brcm63xx/patches-4.4/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
@@ -15,7 +15,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -871,10 +871,8 @@ static int bcm_enet_open(struct net_devi
+@@ -870,10 +870,8 @@ static int bcm_enet_open(struct net_devi
struct bcm_enet_priv *priv;
struct sockaddr addr;
struct device *kdev;
@@ -26,7 +26,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
void *p;
u32 val;
-@@ -882,40 +880,10 @@ static int bcm_enet_open(struct net_devi
+@@ -881,40 +879,10 @@ static int bcm_enet_open(struct net_devi
kdev = &priv->pdev->dev;
if (priv->has_phy) {
@@ -68,7 +68,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
}
/* mask all interrupts and request them */
-@@ -925,7 +893,7 @@ static int bcm_enet_open(struct net_devi
+@@ -924,7 +892,7 @@ static int bcm_enet_open(struct net_devi
ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
if (ret)
@@ -77,7 +77,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, 0,
dev->name, dev);
-@@ -1129,9 +1097,6 @@ out_freeirq_rx:
+@@ -1128,9 +1096,6 @@ out_freeirq_rx:
out_freeirq:
free_irq(dev->irq, dev);
@@ -87,7 +87,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return ret;
}
-@@ -1236,12 +1201,6 @@ static int bcm_enet_stop(struct net_devi
+@@ -1235,12 +1200,6 @@ static int bcm_enet_stop(struct net_devi
free_irq(priv->irq_rx, dev);
free_irq(dev->irq, dev);
@@ -100,7 +100,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
return 0;
}
-@@ -1833,6 +1792,8 @@ static int bcm_enet_probe(struct platfor
+@@ -1832,6 +1791,8 @@ static int bcm_enet_probe(struct platfor
/* MII bus registration */
if (priv->has_phy) {
@@ -109,7 +109,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
priv->mii_bus = mdiobus_alloc();
if (!priv->mii_bus) {
-@@ -1870,6 +1831,38 @@ static int bcm_enet_probe(struct platfor
+@@ -1869,6 +1830,38 @@ static int bcm_enet_probe(struct platfor
dev_err(&pdev->dev, "unable to register mdio bus\n");
goto out_free_mdio;
}
@@ -148,7 +148,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
} else {
/* run platform code to initialize PHY device */
-@@ -1915,6 +1908,9 @@ static int bcm_enet_probe(struct platfor
+@@ -1914,6 +1907,9 @@ static int bcm_enet_probe(struct platfor
return 0;
out_unregister_mdio:
@@ -158,7 +158,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
if (priv->mii_bus)
mdiobus_unregister(priv->mii_bus);
-@@ -1952,6 +1948,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1951,6 +1947,8 @@ static int bcm_enet_remove(struct platfo
enet_writel(priv, 0, ENET_MIISC_REG);
if (priv->has_phy) {
diff --git a/target/linux/brcm63xx/patches-4.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-4.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
index 0a97b25bcd..cf3715e4fe 100644
--- a/target/linux/brcm63xx/patches-4.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ b/target/linux/brcm63xx/patches-4.4/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
@@ -32,7 +32,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
#define ENETSW_MDIOC_EXT_MASK (1 << 16)
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2224,6 +2224,18 @@ static int bcm_enetsw_open(struct net_de
+@@ -2223,6 +2223,18 @@ static int bcm_enetsw_open(struct net_de
priv->sw_port_link[i] = 0;
}
diff --git a/target/linux/brcm63xx/patches-4.4/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-4.4/423-bcm63xx_enet_add_b53_support.patch
index b498edf028..c905cb2d44 100644
--- a/target/linux/brcm63xx/patches-4.4/423-bcm63xx_enet_add_b53_support.patch
+++ b/target/linux/brcm63xx/patches-4.4/423-bcm63xx_enet_add_b53_support.patch
@@ -12,15 +12,15 @@
spinlock_t enetsw_mdio_lock;
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -31,6 +31,7 @@
+@@ -30,6 +30,7 @@
+ #include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/if_vlan.h>
- #include <linux/gpio/consumer.h>
+#include <linux/platform_data/b53.h>
#include <bcm63xx_dev_enet.h>
#include "bcm63xx_enet.h"
-@@ -1969,7 +1970,8 @@ static int bcm_enet_remove(struct platfo
+@@ -1968,7 +1969,8 @@ static int bcm_enet_remove(struct platfo
return 0;
}
@@ -30,7 +30,7 @@
.probe = bcm_enet_probe,
.remove = bcm_enet_remove,
.driver = {
-@@ -1978,6 +1980,42 @@ struct platform_driver bcm63xx_enet_driv
+@@ -1977,6 +1979,42 @@ struct platform_driver bcm63xx_enet_driv
},
};
@@ -73,7 +73,7 @@
/*
* switch mii access callbacks
*/
-@@ -2236,29 +2274,6 @@ static int bcm_enetsw_open(struct net_de
+@@ -2235,29 +2273,6 @@ static int bcm_enetsw_open(struct net_de
enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
}
@@ -103,7 +103,7 @@
/* initialize flow control buffer allocation */
enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2717,6 +2732,9 @@ static int bcm_enetsw_probe(struct platf
+@@ -2716,6 +2731,9 @@ static int bcm_enetsw_probe(struct platf
struct bcm63xx_enetsw_platform_data *pd;
struct resource *res_mem;
int ret, irq_rx, irq_tx;
@@ -113,7 +113,7 @@
if (!bcm_enet_shared_base[0])
return -EPROBE_DEFER;
-@@ -2799,6 +2817,43 @@ static int bcm_enetsw_probe(struct platf
+@@ -2798,6 +2816,43 @@ static int bcm_enetsw_probe(struct platf
priv->pdev = pdev;
priv->net_dev = dev;
@@ -157,7 +157,7 @@
return 0;
out_disable_clk:
-@@ -2820,6 +2875,9 @@ static int bcm_enetsw_remove(struct plat
+@@ -2819,6 +2874,9 @@ static int bcm_enetsw_remove(struct plat
priv = netdev_priv(dev);
unregister_netdev(dev);
diff --git a/target/linux/brcm63xx/patches-4.4/424-bcm63xx_enet_no_request_mem_region.patch b/target/linux/brcm63xx/patches-4.4/424-bcm63xx_enet_no_request_mem_region.patch
index 5762ae7513..f1c7589c4f 100644
--- a/target/linux/brcm63xx/patches-4.4/424-bcm63xx_enet_no_request_mem_region.patch
+++ b/target/linux/brcm63xx/patches-4.4/424-bcm63xx_enet_no_request_mem_region.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2776,9 +2776,9 @@ static int bcm_enetsw_probe(struct platf
+@@ -2775,9 +2775,9 @@ static int bcm_enetsw_probe(struct platf
if (ret)
goto out;
diff --git a/target/linux/brcm63xx/patches-4.4/804-bcm63xx_enet_63268_rgmii_ports.patch b/target/linux/brcm63xx/patches-4.4/804-bcm63xx_enet_63268_rgmii_ports.patch
index 0ea35186c3..a573d2166b 100644
--- a/target/linux/brcm63xx/patches-4.4/804-bcm63xx_enet_63268_rgmii_ports.patch
+++ b/target/linux/brcm63xx/patches-4.4/804-bcm63xx_enet_63268_rgmii_ports.patch
@@ -1,6 +1,6 @@
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2271,6 +2271,10 @@ static int bcm_enetsw_open(struct net_de
+@@ -2270,6 +2270,10 @@ static int bcm_enetsw_open(struct net_de
rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;