aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch')
-rw-r--r--target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch92
1 files changed, 0 insertions, 92 deletions
diff --git a/target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch b/target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch
deleted file mode 100644
index c77eb00bff..0000000000
--- a/target/linux/brcm63xx/patches-4.19/511-board_V2500V.patch
+++ /dev/null
@@ -1,92 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -435,6 +435,26 @@ static struct board_info __initdata boar
- .has_pccard = 1,
- .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+ .name = "V2500V_BB",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 0,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+};
- #endif /* CONFIG_BCM63XX_CPU_6348 */
-
- /*
-@@ -707,6 +727,7 @@ static const struct board_info __initcon
- &board_96348_D4PW,
- &board_spw500v,
- &board_96348sv,
-+ &board_V2500V_BB,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -746,6 +767,7 @@ static struct of_device_id const bcm963x
- { .compatible = "brcm,bcm96348gw-10", .data = &board_96348gw_10, },
- { .compatible = "brcm,bcm96348gw-11", .data = &board_96348gw_11, },
- { .compatible = "brcm,bcm96348gw-a", .data = &board_96348gw_a, },
-+ { .compatible = "bt,voyager-2500v-bb", .data = &board_V2500V_BB, },
- { .compatible = "d-link,dsl-2640b-b", .data = &board_96348_D4PW, },
- { .compatible = "davolink,dv-201amr", .data = &board_DV201AMR, },
- { .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
-@@ -805,6 +827,22 @@ void __init board_bcm963xx_init(void)
- val &= MPI_CSBASE_BASE_MASK;
- }
- boot_addr = (u8 *)KSEG1ADDR(val);
-+ pr_info("Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+ /* Do an early check of CFE and then select bank 0 */
-+
-+ if (boot_addr == (u8 *)0xbf800000) {
-+ u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+ bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+ if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+ pr_info("V2500V: nvram bank 0\n");
-+ boot_addr = tmp_boot_addr;
-+ }
-+ }
-
- /* dump cfe version */
- cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -21,6 +21,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_regs.h>
-@@ -247,6 +248,13 @@ int __init bcm63xx_flash_register(void)
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
-
-+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+ /* Loading from CFE always uses Bank 0 */
-+ if (!strcmp(board_get_name(), "V2500V_BB")) {
-+ pr_info("V2500V: Start in Bank 0\n");
-+ val = val + 0x400000; // Select Bank 0 start address
-+ }
-+
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
- }