diff options
Diffstat (limited to 'target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h')
| -rw-r--r-- | target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h | 758 |
1 files changed, 0 insertions, 758 deletions
diff --git a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h b/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h deleted file mode 100644 index 08ba24cca3..0000000000 --- a/target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/boardparms.h +++ /dev/null @@ -1,758 +0,0 @@ -/* -<:copyright-gpl - - Copyright 2003 Broadcom Corp. All Rights Reserved. - - This program is free software; you can distribute it and/or modify it - under the terms of the GNU General Public License (Version 2) as - published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for more details. - - You should have received a copy of the GNU General Public License along - with this program; if not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - -:> -*/ -/************************************************************************** - * File Name : boardparms.h - * - * Description: This file contains definitions and function prototypes for - * the BCM63xx board parameter access functions. - * - * Updates : 07/14/2003 Created. - ***************************************************************************/ - -#if !defined(_BOARDPARMS_H) -#define _BOARDPARMS_H - -/* Return codes. */ -#define BP_SUCCESS 0 -#define BP_BOARD_ID_NOT_FOUND 1 -#define BP_VALUE_NOT_DEFINED 2 -#define BP_BOARD_ID_NOT_SET 3 - -/* Values for BpGetSdramSize. */ -#define BP_MEMORY_8MB_1_CHIP 0 -#define BP_MEMORY_16MB_1_CHIP 1 -#define BP_MEMORY_32MB_1_CHIP 2 -#define BP_MEMORY_64MB_2_CHIP 3 -#define BP_MEMORY_32MB_2_CHIP 4 -#define BP_MEMORY_16MB_2_CHIP 5 - -/* Values for EthernetMacInfo PhyType. */ -#define BP_ENET_NO_PHY 0 -#define BP_ENET_INTERNAL_PHY 1 -#define BP_ENET_EXTERNAL_PHY 2 -#define BP_ENET_EXTERNAL_SWITCH 3 - -/* Values for EthernetMacInfo Configuration type. */ -#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ -#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ -#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ -#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ - -/* Values for EthernetMacInfo Reverse MII. */ -#define BP_ENET_NO_REVERSE_MII 0 -#define BP_ENET_REVERSE_MII 1 - -/* Values for VoIPDSPInfo DSPType. */ -#define BP_VOIP_NO_DSP 0 -#define BP_VOIP_DSP 1 - - -/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ -#define BP_ACTIVE_MASK 0x8000 -#define BP_ACTIVE_HIGH 0x0000 -#define BP_ACTIVE_LOW 0x8000 -#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) -#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) -#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) -#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) -#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) -#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) -#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) -#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) -#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) -#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) -#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) -#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) -#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) -#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) -#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) -#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) -#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) -#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) -#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) -#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) -#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) -#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) -#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) -#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) -#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) -#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) -#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) -#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) -#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) -#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) -#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) -#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) -#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) -#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) -#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) -#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) -#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) -#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) -#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) -#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) -#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) -#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) -#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) -#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) -#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) -#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) -#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) -#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) -#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) -#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) -#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) -#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) -#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) -#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) -#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) -#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) -#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) -#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) -#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) -#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) -#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) -#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) -#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) -#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) -#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) -#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) -#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) -#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) -#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) -#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) -#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) -#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) -#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) -#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) - -/* Values for external interrupt assignments. */ -#define BP_EXT_INTR_0 0 -#define BP_EXT_INTR_1 1 -#define BP_EXT_INTR_2 2 -#define BP_EXT_INTR_3 3 - -/* Values for chip select assignments. */ -#define BP_CS_0 0 -#define BP_CS_1 1 -#define BP_CS_2 2 -#define BP_CS_3 3 - -/* Value for GPIO and external interrupt fields that are not used. */ -#define BP_NOT_DEFINED 0xffff -#define BP_HW_DEFINED 0xfff0 -#define BP_UNEQUIPPED 0xfff1 - -/* Maximum size of the board id string. */ -#define BP_BOARD_ID_LEN 16 - -/* Maximum number of Ethernet MACs. */ -#define BP_MAX_ENET_MACS 2 - -/* Maximum number of VoIP DSPs. */ -#define BP_MAX_VOIP_DSP 2 - -/* Wireless Antenna Settings. */ -#define BP_WLAN_ANT_MAIN 0 -#define BP_WLAN_ANT_AUX 1 -#define BP_WLAN_ANT_BOTH 3 - -#if !defined(__ASSEMBLER__) - -/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, - * then the other fields are not valid. - */ -typedef struct EthernetMacInfo -{ - unsigned char ucPhyType; /* BP_ENET_xxx */ - unsigned char ucPhyAddress; /* 0 to 31 */ - unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ - unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ - unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ - unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ - unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ - unsigned short numSwitchPorts; /* Number of PHY ports */ - unsigned short usConfigType; /* Configuration type */ - unsigned short usReverseMii; /* Reverse MII */ -} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; - - -/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, - * then the other fields are not valid. - */ -typedef struct VoIPDspInfo -{ - unsigned char ucDspType; - unsigned char ucDspAddress; - unsigned short usExtIntrVoip; - unsigned short usGpioVoipReset; - unsigned short usGpioVoipIntr; - unsigned short usGpioLedVoip; - unsigned short usCsVoip; - -} VOIP_DSP_INFO; - - -/************************************************************************** - * Name : BpSetBoardId - * - * Description: This function find the BOARD_PARAMETERS structure for the - * specified board id string and assigns it to a global, static - * variable. - * - * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not - * have a board parameters configuration record. - ***************************************************************************/ -int BpSetBoardId( char *pszBoardId ); - -/************************************************************************** - * Name : BpGetBoardIds - * - * Description: This function returns all of the supported board id strings. - * - * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id - * strings are returned in. Each id starts at BP_BOARD_ID_LEN - * boundary. - * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that - * were allocated in pszBoardIds. - * - * Returns : Number of board id strings returned. - ***************************************************************************/ -int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); - -/************************************************************************** - * Name : BpGetEthernetMacInfo - * - * Description: This function returns all of the supported board id strings. - * - * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO - * buffers. - * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that - * are pointed to by pEnetInfos. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); - -/************************************************************************** - * Name : BpGetSdramSize - * - * Description: This function returns a constant that describees the board's - * SDRAM type and size. - * - * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size - * is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetSdramSize( unsigned long *pulSdramSize ); - -/************************************************************************** - * Name : BpGetPsiSize - * - * Description: This function returns the persistent storage size in K bytes. - * - * Parameters : [OUT] pulPsiSize - Address of short word that the persistent - * storage size is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - ***************************************************************************/ -int BpGetPsiSize( unsigned long *pulPsiSize ); - -/************************************************************************** - * Name : BpGetRj11InnerOuterPairGpios - * - * Description: This function returns the GPIO pin assignments for changing - * between the RJ11 inner pair and RJ11 outer pair. - * - * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair - * GPIO pin is returned in. - * [OUT] pusOuter - Address of short word that the RJ11 outer pair - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, values are returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, - unsigned short *pusOuter ); - -/************************************************************************** - * Name : BpGetPressAndHoldResetGpio - * - * Description: This function returns the GPIO pin assignment for the press - * and hold reset button. - * - * Parameters : [OUT] pusValue - Address of short word that the press and hold - * reset button GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetVoipResetGpio - * - * Description: This function returns the GPIO pin assignment for the VOIP - * Reset operation. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP reset - * GPIO pin is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetVoipIntrGpio - * - * Description: This function returns the GPIO pin assignment for VoIP interrupt. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt - * GPIO pin is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetPcmciaResetGpio - * - * Description: This function returns the GPIO pin assignment for the PCMCIA - * Reset operation. - * - * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPcmciaResetGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetUartRtsCtsGpios - * - * Description: This function returns the GPIO pin assignments for RTS and CTS - * UART signals. - * - * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO - * pin is returned in. - * [OUT] pusCts - Address of short word that the UART CTS GPIO - * pin is returned in. - * - * Returns : BP_SUCCESS - Success, values are returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); - -/************************************************************************** - * Name : BpGetAdslLedGpio - * - * Description: This function returns the GPIO pin assignment for the ADSL - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the ADSL LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetAdslFailLedGpio - * - * Description: This function returns the GPIO pin assignment for the ADSL - * LED that is used when there is a DSL connection failure. - * - * Parameters : [OUT] pusValue - Address of short word that the ADSL LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslFailLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessLedGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessAntInUse - * - * Description: This function returns the antennas in use for wireless - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna - * is in use. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessAntInUse( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessSesBtnGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * Ses Button. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * Button GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessSesExtIntr - * - * Description: This function returns the external interrupt number for the - * Wireless Ses Button. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * external interrup is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesExtIntr( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessSesLedGpio - * - * Description: This function returns the GPIO pin assignment for the Wireless - * Ses Led. - * - * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses - * Led GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessSesLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetUsbLedGpio - * - * Description: This function returns the GPIO pin assignment for the USB - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the USB LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetUsbLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetHpnaLedGpio - * - * Description: This function returns the GPIO pin assignment for the HPNA - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the HPNA LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWanDataLedGpio - * - * Description: This function returns the GPIO pin assignment for the WAN Data - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWanDataLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetPppLedGpio - * - * Description: This function returns the GPIO pin assignment for the PPP - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the PPP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPppLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetPppFailLedGpio - * - * Description: This function returns the GPIO pin assignment for the PPP - * LED that is used when there is a PPP connection failure. - * - * Parameters : [OUT] pusValue - Address of short word that the PPP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetPppFailLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetVoipLedGpio - * - * Description: This function returns the GPIO pin assignment for the VOIP - * LED. - * - * Parameters : [OUT] pusValue - Address of short word that the VOIP LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderPowerOnLedGpio - * - * Description: This function returns the GPIO pin assignment for the power - * on LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the alarm LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderAlarmLedGpio - * - * Description: This function returns the GPIO pin assignment for the alarm - * LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the alarm LED - * GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderResetCfgLedGpio - * - * Description: This function returns the GPIO pin assignment for the reset - * configuration LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the reset - * configuration LED GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetBootloaderStopLedGpio - * - * Description: This function returns the GPIO pin assignment for the break - * into bootloader LED that is set by the bootloader. - * - * Parameters : [OUT] pusValue - Address of short word that the break into - * bootloader LED GPIO pin is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); - -/************************************************************************** - * Name : BpGetWirelessExtIntr - * - * Description: This function returns the Wireless external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the wireless - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetWirelessExtIntr( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetAdslDyingGaspExtIntr - * - * Description: This function returns the ADSL Dying Gasp external interrupt - * number. - * - * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetVoipExtIntr - * - * Description: This function returns the VOIP external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the VOIP - * external interrupt number is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetHpnaExtIntr - * - * Description: This function returns the HPNA external interrupt number. - * - * Parameters : [OUT] pulValue - Address of short word that the HPNA - * external interrupt number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaExtIntr( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetHpnaChipSelect - * - * Description: This function returns the HPNA chip select number. - * - * Parameters : [OUT] pulValue - Address of short word that the HPNA - * chip select number is returned in. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetHpnaChipSelect( unsigned long *pulValue ); - -/************************************************************************** - * Name : BpGetVoipChipSelect - * - * Description: This function returns the VOIP chip select number. - * - * Parameters : [OUT] pulValue - Address of short word that the VOIP - * chip select number is returned in. - * [IN] dspNum - Address of the DSP to query. - * - * Returns : BP_SUCCESS - Success, value is returned. - * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. - * BP_VALUE_NOT_DEFINED - At least one return value is not defined - * for the board. - ***************************************************************************/ -int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); - -#endif /* __ASSEMBLER__ */ - -#endif /* _BOARDPARMS_H */ - |