diff options
Diffstat (limited to 'target/linux/brcm47xx/patches-3.3/183-USB-Add-driver-for-the-bcma-bus.patch')
| -rw-r--r-- | target/linux/brcm47xx/patches-3.3/183-USB-Add-driver-for-the-bcma-bus.patch | 362 |
1 files changed, 362 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-3.3/183-USB-Add-driver-for-the-bcma-bus.patch b/target/linux/brcm47xx/patches-3.3/183-USB-Add-driver-for-the-bcma-bus.patch new file mode 100644 index 0000000000..c021d503af --- /dev/null +++ b/target/linux/brcm47xx/patches-3.3/183-USB-Add-driver-for-the-bcma-bus.patch @@ -0,0 +1,362 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -633,3 +633,15 @@ config USB_PXA168_EHCI + help + Enable support for Marvell PXA168 SoC's on-chip EHCI + host controller ++ ++config USB_HCD_BCMA ++ tristate "BCMA usb host driver" ++ depends on BCMA && EXPERIMENTAL ++ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD ++ select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD ++ help ++ Enbale support for the EHCI and OCHI host controller on an bcma bus. ++ It converts the bcma driver into two platform device drivers ++ for ehci and ohci. ++ ++ If unsure, say N. +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -37,3 +37,4 @@ obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd + obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o + obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o + obj-$(CONFIG_MIPS_ALCHEMY) += alchemy-common.o ++obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o +--- /dev/null ++++ b/drivers/usb/host/bcma-hcd.c +@@ -0,0 +1,334 @@ ++/* ++ * Broadcom specific Advanced Microcontroller Bus ++ * Broadcom USB-core driver (BCMA bus glue) ++ * ++ * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Based on ssb-ohci driver ++ * Copyright 2007 Michael Buesch <m@bues.ch> ++ * ++ * Derived from the OHCI-PCI driver ++ * Copyright 1999 Roman Weissgaerber ++ * Copyright 2000-2002 David Brownell ++ * Copyright 1999 Linus Torvalds ++ * Copyright 1999 Gregory P. Smith ++ * ++ * Derived from the USBcore related parts of Broadcom-SB ++ * Copyright 2005-2011 Broadcom Corporation ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++#include <linux/bcma/bcma.h> ++#include <linux/delay.h> ++#include <linux/platform_device.h> ++#include <linux/module.h> ++#include <linux/usb/ehci_pdriver.h> ++#include <linux/usb/ohci_pdriver.h> ++ ++MODULE_AUTHOR("Hauke Mehrtens"); ++MODULE_DESCRIPTION("Common USB driver for BCMA Bus"); ++MODULE_LICENSE("GPL"); ++ ++struct bcma_hcd_device { ++ struct platform_device *ehci_dev; ++ struct platform_device *ohci_dev; ++}; ++ ++/* Wait for bitmask in a register to get set or cleared. ++ * timeout is in units of ten-microseconds. ++ */ ++static int bcma_wait_bits(struct bcma_device *dev, u16 reg, u32 bitmask, ++ int timeout) ++{ ++ int i; ++ u32 val; ++ ++ for (i = 0; i < timeout; i++) { ++ val = bcma_read32(dev, reg); ++ if ((val & bitmask) == bitmask) ++ return 0; ++ udelay(10); ++ } ++ ++ return -ETIMEDOUT; ++} ++ ++static void __devinit bcma_hcd_4716wa(struct bcma_device *dev) ++{ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++ /* Work around for 4716 failures. */ ++ if (dev->bus->chipinfo.id == 0x4716) { ++ u32 tmp; ++ ++ tmp = bcma_cpu_clock(&dev->bus->drv_mips); ++ if (tmp >= 480000000) ++ tmp = 0x1846b; /* set CDR to 0x11(fast) */ ++ else if (tmp == 453000000) ++ tmp = 0x1046b; /* set CDR to 0x10(slow) */ ++ else ++ tmp = 0; ++ ++ /* Change Shim mdio control reg to fix host not acking at ++ * high frequencies ++ */ ++ if (tmp) { ++ bcma_write32(dev, 0x524, 0x1); /* write sel to enable */ ++ udelay(500); ++ ++ bcma_write32(dev, 0x524, tmp); ++ udelay(500); ++ bcma_write32(dev, 0x524, 0x4ab); ++ udelay(500); ++ bcma_read32(dev, 0x528); ++ bcma_write32(dev, 0x528, 0x80000000); ++ } ++ } ++#endif /* CONFIG_BCMA_DRIVER_MIPS */ ++} ++ ++/* based on arch/mips/brcm-boards/bcm947xx/pcibios.c */ ++static void __devinit bcma_hcd_init_chip(struct bcma_device *dev) ++{ ++ u32 tmp; ++ ++ /* ++ * USB 2.0 special considerations: ++ * ++ * 1. Since the core supports both OHCI and EHCI functions, it must ++ * only be reset once. ++ * ++ * 2. In addition to the standard SI reset sequence, the Host Control ++ * Register must be programmed to bring the USB core and various ++ * phy components out of reset. ++ */ ++ if (!bcma_core_is_enabled(dev)) { ++ bcma_core_enable(dev, 0); ++ mdelay(10); ++ if (dev->id.rev >= 5) { ++ /* Enable Misc PLL */ ++ tmp = bcma_read32(dev, 0x1e0); ++ tmp |= 0x100; ++ bcma_write32(dev, 0x1e0, tmp); ++ if (bcma_wait_bits(dev, 0x1e0, 1 << 24, 100)) ++ printk(KERN_EMERG "Failed to enable misc PPL!\n"); ++ ++ /* Take out of resets */ ++ bcma_write32(dev, 0x200, 0x4ff); ++ udelay(25); ++ bcma_write32(dev, 0x200, 0x6ff); ++ udelay(25); ++ ++ /* Make sure digital and AFE are locked in USB PHY */ ++ bcma_write32(dev, 0x524, 0x6b); ++ udelay(50); ++ tmp = bcma_read32(dev, 0x524); ++ udelay(50); ++ bcma_write32(dev, 0x524, 0xab); ++ udelay(50); ++ tmp = bcma_read32(dev, 0x524); ++ udelay(50); ++ bcma_write32(dev, 0x524, 0x2b); ++ udelay(50); ++ tmp = bcma_read32(dev, 0x524); ++ udelay(50); ++ bcma_write32(dev, 0x524, 0x10ab); ++ udelay(50); ++ tmp = bcma_read32(dev, 0x524); ++ ++ if (bcma_wait_bits(dev, 0x528, 0xc000, 10000)) { ++ tmp = bcma_read32(dev, 0x528); ++ printk(KERN_EMERG ++ "USB20H mdio_rddata 0x%08x\n", tmp); ++ } ++ bcma_write32(dev, 0x528, 0x80000000); ++ tmp = bcma_read32(dev, 0x314); ++ udelay(265); ++ bcma_write32(dev, 0x200, 0x7ff); ++ udelay(10); ++ ++ /* Take USB and HSIC out of non-driving modes */ ++ bcma_write32(dev, 0x510, 0); ++ } else { ++ bcma_write32(dev, 0x200, 0x7ff); ++ ++ udelay(1); ++ } ++ ++ bcma_hcd_4716wa(dev); ++ } ++} ++ ++static const struct usb_ehci_pdata ehci_pdata = { ++}; ++ ++static const struct usb_ohci_pdata ohci_pdata = { ++}; ++ ++static struct platform_device * __devinit ++bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr) ++{ ++ struct platform_device *hci_dev; ++ struct resource hci_res[2]; ++ int ret = -ENOMEM; ++ ++ memset(hci_res, 0, sizeof(hci_res)); ++ ++ hci_res[0].start = addr; ++ hci_res[0].end = hci_res[0].start + 0x1000 - 1; ++ hci_res[0].flags = IORESOURCE_MEM; ++ ++ hci_res[1].start = dev->irq; ++ hci_res[1].flags = IORESOURCE_IRQ; ++ ++ hci_dev = platform_device_alloc(ohci ? "ohci-platform" : ++ "ehci-platform" , 0); ++ if (!hci_dev) ++ return NULL; ++ ++ hci_dev->dev.parent = &dev->dev; ++ hci_dev->dev.dma_mask = &hci_dev->dev.coherent_dma_mask; ++ ++ ret = platform_device_add_resources(hci_dev, hci_res, ++ ARRAY_SIZE(hci_res)); ++ if (ret) ++ goto err_alloc; ++ if (ohci) ++ ret = platform_device_add_data(hci_dev, &ohci_pdata, ++ sizeof(ohci_pdata)); ++ else ++ ret = platform_device_add_data(hci_dev, &ehci_pdata, ++ sizeof(ehci_pdata)); ++ if (ret) ++ goto err_alloc; ++ ret = platform_device_add(hci_dev); ++ if (ret) ++ goto err_alloc; ++ ++ return hci_dev; ++ ++err_alloc: ++ platform_device_put(hci_dev); ++ return ERR_PTR(ret); ++} ++ ++static int __devinit bcma_hcd_probe(struct bcma_device *dev) ++{ ++ int err; ++ u16 chipid_top; ++ u32 ohci_addr; ++ struct bcma_hcd_device *usb_dev; ++ struct bcma_chipinfo *chipinfo; ++ ++ chipinfo = &dev->bus->chipinfo; ++ /* USBcores are only connected on embedded devices. */ ++ chipid_top = (chipinfo->id & 0xFF00); ++ if (chipid_top != 0x4700 && chipid_top != 0x5300) ++ return -ENODEV; ++ ++ /* TODO: Probably need checks here; is the core connected? */ ++ ++ if (dma_set_mask(dev->dma_dev, DMA_BIT_MASK(32)) || ++ dma_set_coherent_mask(dev->dma_dev, DMA_BIT_MASK(32))) ++ return -EOPNOTSUPP; ++ ++ usb_dev = kzalloc(sizeof(struct bcma_hcd_device), GFP_KERNEL); ++ if (!usb_dev) ++ return -ENOMEM; ++ ++ bcma_hcd_init_chip(dev); ++ ++ /* In AI chips EHCI is addrspace 0, OHCI is 1 */ ++ ohci_addr = dev->addr1; ++ if ((chipinfo->id == 0x5357 || chipinfo->id == 0x4749) ++ && chipinfo->rev == 0) ++ ohci_addr = 0x18009000; ++ ++ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr); ++ if (IS_ERR(usb_dev->ohci_dev)) { ++ err = PTR_ERR(usb_dev->ohci_dev); ++ goto err_free_usb_dev; ++ } ++ ++ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr); ++ if (IS_ERR(usb_dev->ehci_dev)) { ++ err = PTR_ERR(usb_dev->ehci_dev); ++ goto err_unregister_ohci_dev; ++ } ++ ++ bcma_set_drvdata(dev, usb_dev); ++ return 0; ++ ++err_unregister_ohci_dev: ++ platform_device_unregister(usb_dev->ohci_dev); ++err_free_usb_dev: ++ kfree(usb_dev); ++ return err; ++} ++ ++static void __devexit bcma_hcd_remove(struct bcma_device *dev) ++{ ++ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev); ++ struct platform_device *ohci_dev = usb_dev->ohci_dev; ++ struct platform_device *ehci_dev = usb_dev->ehci_dev; ++ ++ if (ohci_dev) ++ platform_device_unregister(ohci_dev); ++ if (ehci_dev) ++ platform_device_unregister(ehci_dev); ++ ++ bcma_core_disable(dev, 0); ++} ++ ++static void bcma_hcd_shutdown(struct bcma_device *dev) ++{ ++ bcma_core_disable(dev, 0); ++} ++ ++#ifdef CONFIG_PM ++ ++static int bcma_hcd_suspend(struct bcma_device *dev, pm_message_t state) ++{ ++ bcma_core_disable(dev, 0); ++ ++ return 0; ++} ++ ++static int bcma_hcd_resume(struct bcma_device *dev) ++{ ++ bcma_core_enable(dev, 0); ++ ++ return 0; ++} ++ ++#else /* !CONFIG_PM */ ++#define bcma_hcd_suspend NULL ++#define bcma_hcd_resume NULL ++#endif /* CONFIG_PM */ ++ ++static const struct bcma_device_id bcma_hcd_table[] __devinitconst = { ++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS), ++ BCMA_CORETABLE_END ++}; ++MODULE_DEVICE_TABLE(bcma, bcma_hcd_table); ++ ++static struct bcma_driver bcma_hcd_driver = { ++ .name = KBUILD_MODNAME, ++ .id_table = bcma_hcd_table, ++ .probe = bcma_hcd_probe, ++ .remove = __devexit_p(bcma_hcd_remove), ++ .shutdown = bcma_hcd_shutdown, ++ .suspend = bcma_hcd_suspend, ++ .resume = bcma_hcd_resume, ++}; ++ ++static int __init bcma_hcd_init(void) ++{ ++ return bcma_driver_register(&bcma_hcd_driver); ++} ++module_init(bcma_hcd_init); ++ ++static void __exit bcma_hcd_exit(void) ++{ ++ bcma_driver_unregister(&bcma_hcd_driver); ++} ++module_exit(bcma_hcd_exit); |