diff options
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.30/250-ohci-ssb-usb2.patch')
| -rw-r--r-- | target/linux/brcm47xx/patches-2.6.30/250-ohci-ssb-usb2.patch | 58 |
1 files changed, 23 insertions, 35 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.30/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.30/250-ohci-ssb-usb2.patch index 85361ab740..065a16b386 100644 --- a/target/linux/brcm47xx/patches-2.6.30/250-ohci-ssb-usb2.patch +++ b/target/linux/brcm47xx/patches-2.6.30/250-ohci-ssb-usb2.patch @@ -1,40 +1,31 @@ ---- a/drivers/usb/host/ohci-ssb.c -+++ b/drivers/usb/host/ohci-ssb.c -@@ -106,10 +106,59 @@ static int ssb_ohci_attach(struct ssb_de +--- + drivers/usb/host/ohci-ssb.c | 39 ++++++++++++++++++++++++++++++++++++--- + 1 file changed, 36 insertions(+), 3 deletions(-) + +--- linux-2.6.28.10.orig/drivers/usb/host/ohci-ssb.c ++++ linux-2.6.28.10/drivers/usb/host/ohci-ssb.c +@@ -106,10 +106,42 @@ static int ssb_ohci_attach(struct ssb_de int err = -ENOMEM; u32 tmp, flags = 0; - if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) -+ /* -+ * THE FOLLOWING COMMENTS PRESERVED FROM GPL SOURCE RELEASE -+ * -+ * The USB core requires a special bit to be set during core -+ * reset to enable host (OHCI) mode. Resetting the SB core in -+ * pcibios_enable_device() is a hack for compatibility with -+ * vanilla usb-ohci so that it does not have to know about -+ * SB. A driver that wants to use the USB core in device mode -+ * should know about SB and should reset the bit back to 0 -+ * after calling pcibios_enable_device(). -+ */ -+ + if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { ++ /* Put the device into host-mode. */ flags |= SSB_OHCI_TMSLOW_HOSTMODE; +- +- ssb_device_enable(dev, flags); + ssb_device_enable(dev, flags); -+ } -+ -+ /* -+ * USB 2.0 special considerations: -+ * -+ * 1. Since the core supports both OHCI and EHCI functions, it must -+ * only be reset once. -+ * -+ * 2. In addition to the standard SB reset sequence, the Host Control -+ * Register must be programmed to bring the USB core and various -+ * phy components out of reset. -+ */ -+ -+ else if (dev->id.coreid == SSB_DEV_USB20_HOST) { -+#warning FIX ME need test for core being up & exit ++ } else if (dev->id.coreid == SSB_DEV_USB20_HOST) { ++ /* ++ * USB 2.0 special considerations: ++ * ++ * 1. Since the core supports both OHCI and EHCI functions, it must ++ * only be reset once. ++ * ++ * 2. In addition to the standard SSB reset sequence, the Host Control ++ * Register must be programmed to bring the USB core and various ++ * phy components out of reset. ++ */ + ssb_device_enable(dev, 0); + ssb_write32(dev, 0x200, 0x7ff); + udelay(1); @@ -54,15 +45,12 @@ + tmp = ssb_read32(dev, 0x304); + printk("USB20H shim: 0x%0x\n", tmp); + } -+ } -+ else ++ } else + ssb_device_enable(dev, 0); -- ssb_device_enable(dev, flags); - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, dev_name(dev->dev)); -@@ -200,6 +249,7 @@ static int ssb_ohci_resume(struct ssb_de +@@ -200,6 +232,7 @@ static int ssb_ohci_resume(struct ssb_de static const struct ssb_device_id ssb_ohci_table[] = { SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), |