aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch')
-rw-r--r--target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch1252
1 files changed, 1252 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
new file mode 100644
index 0000000000..1b97d126c9
--- /dev/null
+++ b/target/linux/brcm47xx/patches-2.6.25/700-ssb-gigabit-ethernet-driver.patch
@@ -0,0 +1,1252 @@
+Index: linux-2.6.23.16/drivers/ssb/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/Kconfig 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/Kconfig 2008-03-19 11:16:18.000000000 +0100
+@@ -120,4 +120,13 @@ config SSB_DRIVER_EXTIF
+
+ If unsure, say N
+
++config SSB_DRIVER_GIGE
++ bool "SSB Broadcom Gigabit Ethernet driver"
++ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS
++ help
++ Driver for the Sonics Silicon Backplane attached
++ Broadcom Gigabit Ethernet.
++
++ If unsure, say N
++
+ endmenu
+Index: linux-2.6.23.16/drivers/ssb/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/Makefile 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/Makefile 2008-03-19 11:16:18.000000000 +0100
+@@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o
+ ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
+ ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
+ ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
++ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
+
+ # b43 pci-ssb-bridge driver
+ # Not strictly a part of SSB, but kept here for convenience
+Index: linux-2.6.23.16/drivers/ssb/driver_gige.c
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/drivers/ssb/driver_gige.c 2008-03-19 11:16:18.000000000 +0100
+@@ -0,0 +1,294 @@
++/*
++ * Sonics Silicon Backplane
++ * Broadcom Gigabit Ethernet core driver
++ *
++ * Copyright 2008, Broadcom Corporation
++ * Copyright 2008, Michael Buesch <mb@bu3sch.de>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++#include <linux/ssb/ssb.h>
++#include <linux/ssb/ssb_driver_gige.h>
++#include <linux/pci.h>
++#include <linux/pci_regs.h>
++
++
++/*
++MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
++MODULE_AUTHOR("Michael Buesch");
++MODULE_LICENSE("GPL");
++*/
++
++static const struct ssb_device_id ssb_gige_tbl[] = {
++ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
++ SSB_DEVTABLE_END
++};
++/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
++
++
++static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
++{
++ return ssb_read8(dev->dev, offset);
++}
++
++static inline u16 gige_read16(struct ssb_gige *dev, u16 offset)
++{
++ return ssb_read16(dev->dev, offset);
++}
++
++static inline u32 gige_read32(struct ssb_gige *dev, u16 offset)
++{
++ return ssb_read32(dev->dev, offset);
++}
++
++static inline void gige_write8(struct ssb_gige *dev,
++ u16 offset, u8 value)
++{
++ ssb_write8(dev->dev, offset, value);
++}
++
++static inline void gige_write16(struct ssb_gige *dev,
++ u16 offset, u16 value)
++{
++ ssb_write16(dev->dev, offset, value);
++}
++
++static inline void gige_write32(struct ssb_gige *dev,
++ u16 offset, u32 value)
++{
++ ssb_write32(dev->dev, offset, value);
++}
++
++static inline
++u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset)
++{
++ BUG_ON(offset >= 256);
++ return gige_read8(dev, SSB_GIGE_PCICFG + offset);
++}
++
++static inline
++u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset)
++{
++ BUG_ON(offset >= 256);
++ return gige_read16(dev, SSB_GIGE_PCICFG + offset);
++}
++
++static inline
++u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset)
++{
++ BUG_ON(offset >= 256);
++ return gige_read32(dev, SSB_GIGE_PCICFG + offset);
++}
++
++static inline
++void gige_pcicfg_write8(struct ssb_gige *dev,
++ unsigned int offset, u8 value)
++{
++ BUG_ON(offset >= 256);
++ gige_write8(dev, SSB_GIGE_PCICFG + offset, value);
++}
++
++static inline
++void gige_pcicfg_write16(struct ssb_gige *dev,
++ unsigned int offset, u16 value)
++{
++ BUG_ON(offset >= 256);
++ gige_write16(dev, SSB_GIGE_PCICFG + offset, value);
++}
++
++static inline
++void gige_pcicfg_write32(struct ssb_gige *dev,
++ unsigned int offset, u32 value)
++{
++ BUG_ON(offset >= 256);
++ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
++}
++
++static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
++ int reg, int size, u32 *val)
++{
++ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
++ unsigned long flags;
++
++ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ if (reg >= 256)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ spin_lock_irqsave(&dev->lock, flags);
++ switch (size) {
++ case 1:
++ *val = gige_pcicfg_read8(dev, reg);
++ break;
++ case 2:
++ *val = gige_pcicfg_read16(dev, reg);
++ break;
++ case 4:
++ *val = gige_pcicfg_read32(dev, reg);
++ break;
++ default:
++ WARN_ON(1);
++ }
++ spin_unlock_irqrestore(&dev->lock, flags);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
++ int reg, int size, u32 val)
++{
++ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
++ unsigned long flags;
++
++ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
++ return PCIBIOS_DEVICE_NOT_FOUND;
++ if (reg >= 256)
++ return PCIBIOS_DEVICE_NOT_FOUND;
++
++ spin_lock_irqsave(&dev->lock, flags);
++ switch (size) {
++ case 1:
++ gige_pcicfg_write8(dev, reg, val);
++ break;
++ case 2:
++ gige_pcicfg_write16(dev, reg, val);
++ break;
++ case 4:
++ gige_pcicfg_write32(dev, reg, val);
++ break;
++ default:
++ WARN_ON(1);
++ }
++ spin_unlock_irqrestore(&dev->lock, flags);
++
++ return PCIBIOS_SUCCESSFUL;
++}
++
++static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
++{
++ struct ssb_gige *dev;
++ u32 base, tmslow, tmshigh;
++
++ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
++ if (!dev)
++ return -ENOMEM;
++ dev->dev = sdev;
++
++ spin_lock_init(&dev->lock);
++ dev->pci_controller.pci_ops = &dev->pci_ops;
++ dev->pci_controller.io_resource = &dev->io_resource;
++ dev->pci_controller.mem_resource = &dev->mem_resource;
++ dev->pci_controller.io_map_base = 0x800;
++ dev->pci_ops.read = ssb_gige_pci_read_config;
++ dev->pci_ops.write = ssb_gige_pci_write_config;
++
++ dev->io_resource.name = SSB_GIGE_IO_RES_NAME;
++ dev->io_resource.start = 0x800;
++ dev->io_resource.end = 0x8FF;
++ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
++
++ if (!ssb_device_is_enabled(sdev))
++ ssb_device_enable(sdev, 0);
++
++ /* Setup BAR0. This is a 64k MMIO region. */
++ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1));
++ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base);
++ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0);
++
++ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME;
++ dev->mem_resource.start = base;
++ dev->mem_resource.end = base + 0x10000 - 1;
++ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
++
++ /* Enable the memory region. */
++ gige_pcicfg_write16(dev, PCI_COMMAND,
++ gige_pcicfg_read16(dev, PCI_COMMAND)
++ | PCI_COMMAND_MEMORY);
++
++ /* Write flushing is controlled by the Flush Status Control register.
++ * We want to flush every register write with a timeout and we want
++ * to disable the IRQ mask while flushing to avoid concurrency.
++ * Note that automatic write flushing does _not_ work from
++ * an IRQ handler. The driver must flush manually by reading a register.
++ */
++ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068);
++
++ /* Check if we have an RGMII or GMII PHY-bus.
++ * On RGMII do not bypass the DLLs */
++ tmslow = ssb_read32(sdev, SSB_TMSLOW);
++ tmshigh = ssb_read32(sdev, SSB_TMSHIGH);
++ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) {
++ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS;
++ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS;
++ dev->has_rgmii = 1;
++ } else {
++ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS;
++ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS;
++ dev->has_rgmii = 0;
++ }
++ tmslow |= SSB_GIGE_TMSLOW_DLLEN;
++ ssb_write32(sdev, SSB_TMSLOW, tmslow);
++
++ ssb_set_drvdata(sdev, dev);
++ register_pci_controller(&dev->pci_controller);
++
++ return 0;
++}
++
++bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
++{
++ if (!pdev->resource[0].name)
++ return 0;
++ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
++}
++EXPORT_SYMBOL(pdev_is_ssb_gige_core);
++
++int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
++ struct pci_dev *pdev)
++{
++ struct ssb_gige *dev = ssb_get_drvdata(sdev);
++ struct resource *res;
++
++ if (pdev->bus->ops != &dev->pci_ops) {
++ /* The PCI device is not on this SSB GigE bridge device. */
++ return -ENODEV;
++ }
++
++ /* Fixup the PCI resources. */
++ res = &(pdev->resource[0]);
++ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
++ res->name = dev->mem_resource.name;
++ res->start = dev->mem_resource.start;
++ res->end = dev->mem_resource.end;
++
++ /* Fixup interrupt lines. */
++ pdev->irq = ssb_mips_irq(sdev) + 2;
++ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
++
++ return 0;
++}
++
++int ssb_gige_map_irq(struct ssb_device *sdev,
++ const struct pci_dev *pdev)
++{
++ struct ssb_gige *dev = ssb_get_drvdata(sdev);
++
++ if (pdev->bus->ops != &dev->pci_ops) {
++ /* The PCI device is not on this SSB GigE bridge device. */
++ return -ENODEV;
++ }
++
++ return ssb_mips_irq(sdev) + 2;
++}
++
++static struct ssb_driver ssb_gige_driver = {
++ .name = "BCM-GigE",
++ .id_table = ssb_gige_tbl,
++ .probe = ssb_gige_probe,
++};
++
++int ssb_gige_init(void)
++{
++ return ssb_driver_register(&ssb_gige_driver);
++}
+Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_gige.h
+===================================================================
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.23.16/include/linux/ssb/ssb_driver_gige.h 2008-03-19 11:16:18.000000000 +0100
+@@ -0,0 +1,174 @@
++#ifndef LINUX_SSB_DRIVER_GIGE_H_
++#define LINUX_SSB_DRIVER_GIGE_H_
++
++#include <linux/ssb/ssb.h>
++#include <linux/pci.h>
++#include <linux/spinlock.h>
++
++
++#ifdef CONFIG_SSB_DRIVER_GIGE
++
++
++#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
++#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
++#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
++#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
++#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
++#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
++#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
++#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
++#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
++
++/* TM Status High flags */
++#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
++/* TM Status Low flags */
++#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
++#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
++#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
++
++/* Boardflags (low) */
++#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
++
++
++#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
++#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
++
++struct ssb_gige {
++ struct ssb_device *dev;
++
++ spinlock_t lock;
++
++ /* True, if the device has an RGMII bus.
++ * False, if the device has a GMII bus. */
++ bool has_rgmii;
++
++ /* The PCI controller device. */
++ struct pci_controller pci_controller;
++ struct pci_ops pci_ops;
++ struct resource mem_resource;
++ struct resource io_resource;
++};
++
++/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
++extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
++
++/* Convert a pci_dev pointer to a ssb_gige pointer. */
++static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
++{
++ if (!pdev_is_ssb_gige_core(pdev))
++ return NULL;
++ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
++}
++
++/* Returns whether the PHY is connected by an RGMII bus. */
++static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
++{
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ return (dev ? dev->has_rgmii : 0);
++}
++
++/* Returns whether we have a Roboswitch. */
++static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
++{
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (dev)
++ return !!(dev->dev->bus->sprom.boardflags_lo &
++ SSB_GIGE_BFL_ROBOSWITCH);
++ return 0;
++}
++
++/* Returns whether we can only do one DMA at once. */
++static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
++{
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (dev)
++ return ((dev->dev->bus->chip_id == 0x4785) &&
++ (dev->dev->bus->chip_rev < 2));
++ return 0;
++}
++
++/* Returns whether we must flush posted writes. */
++static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
++{
++ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
++ if (dev)
++ return (dev->dev->bus->chip_id == 0x4785);
++ return 0;
++}
++
++extern char * nvram_get(const char *name);
++/* Get the device MAC address */
++static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
++{
++#ifdef CONFIG_BCM947XX
++ char *res = nvram_get("et0macaddr");
++ if (res)
++ memcpy(macaddr, res, 6);
++#endif
++}
++
++extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
++ struct pci_dev *pdev);
++extern int ssb_gige_map_irq(struct ssb_device *sdev,
++ const struct pci_dev *pdev);
++
++/* The GigE driver is not a standalone module, because we don't have support
++ * for unregistering the driver. So we could not unload the module anyway. */
++extern int ssb_gige_init(void);
++static inline void ssb_gige_exit(void)
++{
++ /* Currently we can not unregister the GigE driver,
++ * because we can not unregister the PCI bridge. */
++ BUG();
++}
++
++
++#else /* CONFIG_SSB_DRIVER_GIGE */
++/* Gigabit Ethernet driver disabled */
++
++
++static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
++ struct pci_dev *pdev)
++{
++ return -ENOSYS;
++}
++static inline int ssb_gige_map_irq(struct ssb_device *sdev,
++ const struct pci_dev *pdev)
++{
++ return -ENOSYS;
++}
++static inline int ssb_gige_init(void)
++{
++ return 0;
++}
++static inline void ssb_gige_exit(void)
++{
++}
++
++static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
++{
++ return 0;
++}
++static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
++{
++ return NULL;
++}
++static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
++{
++ return 0;
++}
++static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
++{
++ return 0;
++}
++static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
++{
++ return 0;
++}
++static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
++{
++ return 0;
++}
++
++#endif /* CONFIG_SSB_DRIVER_GIGE */
++#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
+Index: linux-2.6.23.16/drivers/ssb/driver_pcicore.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/driver_pcicore.c 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/driver_pcicore.c 2008-03-19 11:16:18.000000000 +0100
+@@ -60,74 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock);
+ /* Core to access the external PCI config space. Can only have one. */
+ static struct ssb_pcicore *extpci_core;
+
+-static u32 ssb_pcicore_pcibus_iobase = 0x100;
+-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
+-
+-int pcibios_plat_dev_init(struct pci_dev *d)
+-{
+- struct resource *res;
+- int pos, size;
+- u32 *base;
+-
+- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
+- pci_name(d));
+-
+- /* Fix up resource bases */
+- for (pos = 0; pos < 6; pos++) {
+- res = &d->resource[pos];
+- if (res->flags & IORESOURCE_IO)
+- base = &ssb_pcicore_pcibus_iobase;
+- else
+- base = &ssb_pcicore_pcibus_membase;
+- res->flags |= IORESOURCE_PCI_FIXED;
+- if (res->end) {
+- size = res->end - res->start + 1;
+- if (*base & (size - 1))
+- *base = (*base + size) & ~(size - 1);
+- res->start = *base;
+- res->end = res->start + size - 1;
+- *base += size;
+- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
+- }
+- /* Fix up PCI bridge BAR0 only */
+- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
+- break;
+- }
+- /* Fix up interrupt lines */
+- d->irq = ssb_mips_irq(extpci_core->dev) + 2;
+- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
+-
+- return 0;
+-}
+-
+-static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
+-{
+- u8 lat;
+-
+- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
+- return;
+-
+- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
+-
+- /* Enable PCI bridge bus mastering and memory space */
+- pci_set_master(dev);
+- pcibios_enable_device(dev, ~0);
+-
+- /* Enable PCI bridge BAR1 prefetch and burst */
+- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+-
+- /* Make sure our latency is high enough to handle the devices behind us */
+- lat = 168;
+- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
+- pci_name(dev), lat);
+- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
+-}
+-DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
+-
+-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+-{
+- return ssb_mips_irq(extpci_core->dev) + 2;
+-}
+
+ static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
+ unsigned int bus, unsigned int dev,
+@@ -317,6 +249,92 @@ static struct pci_controller ssb_pcicore
+ .mem_offset = 0x24000000,
+ };
+
++static u32 ssb_pcicore_pcibus_iobase = 0x100;
++static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
++
++/* This function is called when doing a pci_enable_device().
++ * We must first check if the device is a device on the PCI-core bridge. */
++int ssb_pcicore_plat_dev_init(struct pci_dev *d)
++{
++ struct resource *res;
++ int pos, size;
++ u32 *base;
++
++ if (d->bus->ops != &ssb_pcicore_pciops) {
++ /* This is not a device on the PCI-core bridge. */
++ return -ENODEV;
++ }
++
++ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
++ pci_name(d));
++
++ /* Fix up resource bases */
++ for (pos = 0; pos < 6; pos++) {
++ res = &d->resource[pos];
++ if (res->flags & IORESOURCE_IO)
++ base = &ssb_pcicore_pcibus_iobase;
++ else
++ base = &ssb_pcicore_pcibus_membase;
++ res->flags |= IORESOURCE_PCI_FIXED;
++ if (res->end) {
++ size = res->end - res->start + 1;
++ if (*base & (size - 1))
++ *base = (*base + size) & ~(size - 1);
++ res->start = *base;
++ res->end = res->start + size - 1;
++ *base += size;
++ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
++ }
++ /* Fix up PCI bridge BAR0 only */
++ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
++ break;
++ }
++ /* Fix up interrupt lines */
++ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
++ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
++
++ return 0;
++}
++
++/* Early PCI fixup for a device on the PCI-core bridge. */
++static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
++{
++ u8 lat;
++
++ if (dev->bus->ops != &ssb_pcicore_pciops) {
++ /* This is not a device on the PCI-core bridge. */
++ return;
++ }
++ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
++ return;
++
++ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
++
++ /* Enable PCI bridge bus mastering and memory space */
++ pci_set_master(dev);
++ pcibios_enable_device(dev, ~0);
++
++ /* Enable PCI bridge BAR1 prefetch and burst */
++ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
++
++ /* Make sure our latency is high enough to handle the devices behind us */
++ lat = 168;
++ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
++ pci_name(dev), lat);
++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
++}
++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
++
++/* PCI device IRQ mapping. */
++int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ if (dev->bus->ops != &ssb_pcicore_pciops) {
++ /* This is not a device on the PCI-core bridge. */
++ return -ENODEV;
++ }
++ return ssb_mips_irq(extpci_core->dev) + 2;
++}
++
+ static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
+ {
+ u32 val;
+Index: linux-2.6.23.16/drivers/ssb/embedded.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/embedded.c 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/embedded.c 2008-03-19 11:16:18.000000000 +0100
+@@ -10,6 +10,9 @@
+
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_embedded.h>
++#include <linux/ssb/ssb_driver_pci.h>
++#include <linux/ssb/ssb_driver_gige.h>
++#include <linux/pci.h>
+
+ #include "ssb_private.h"
+
+@@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bu
+ return res;
+ }
+ EXPORT_SYMBOL(ssb_gpio_polarity);
++
++#ifdef CONFIG_SSB_DRIVER_GIGE
++static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
++{
++ struct pci_dev *pdev = (struct pci_dev *)data;
++ struct ssb_device *dev;
++ unsigned int i;
++ int res;
++
++ for (i = 0; i < bus->nr_devices; i++) {
++ dev = &(bus->devices[i]);
++ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
++ continue;
++ if (!dev->dev ||
++ !dev->dev->driver ||
++ !device_is_registered(dev->dev))
++ continue;
++ res = ssb_gige_pcibios_plat_dev_init(dev, pdev);
++ if (res >= 0)
++ return res;
++ }
++
++ return -ENODEV;
++}
++#endif /* CONFIG_SSB_DRIVER_GIGE */
++
++int ssb_pcibios_plat_dev_init(struct pci_dev *dev)
++{
++ int err;
++
++ err = ssb_pcicore_plat_dev_init(dev);
++ if (!err)
++ return 0;
++#ifdef CONFIG_SSB_DRIVER_GIGE
++ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback);
++ if (err >= 0)
++ return err;
++#endif
++ /* This is not a PCI device on any SSB device. */
++
++ return -ENODEV;
++}
++
++#ifdef CONFIG_SSB_DRIVER_GIGE
++static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data)
++{
++ const struct pci_dev *pdev = (const struct pci_dev *)data;
++ struct ssb_device *dev;
++ unsigned int i;
++ int res;
++
++ for (i = 0; i < bus->nr_devices; i++) {
++ dev = &(bus->devices[i]);
++ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
++ continue;
++ if (!dev->dev ||
++ !dev->dev->driver ||
++ !device_is_registered(dev->dev))
++ continue;
++ res = ssb_gige_map_irq(dev, pdev);
++ if (res >= 0)
++ return res;
++ }
++
++ return -ENODEV;
++}
++#endif /* CONFIG_SSB_DRIVER_GIGE */
++
++int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ int res;
++
++ /* Check if this PCI device is a device on a SSB bus or device
++ * and return the IRQ number for it. */
++
++ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin);
++ if (res >= 0)
++ return res;
++#ifdef CONFIG_SSB_DRIVER_GIGE
++ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback);
++ if (res >= 0)
++ return res;
++#endif
++ /* This is not a PCI device on any SSB device. */
++
++ return -ENODEV;
++}
+Index: linux-2.6.23.16/include/linux/ssb/ssb.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/ssb/ssb.h 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/include/linux/ssb/ssb.h 2008-03-19 11:16:18.000000000 +0100
+@@ -422,5 +422,12 @@ extern int ssb_bus_powerup(struct ssb_bu
+ extern u32 ssb_admatch_base(u32 adm);
+ extern u32 ssb_admatch_size(u32 adm);
+
++/* PCI device mapping and fixup routines.
++ * Called from the architecture pcibios init code.
++ * These are only available on SSB_EMBEDDED configurations. */
++#ifdef CONFIG_SSB_EMBEDDED
++int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
++int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
++#endif /* CONFIG_SSB_EMBEDDED */
+
+ #endif /* LINUX_SSB_H_ */
+Index: linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h
+===================================================================
+--- linux-2.6.23.16.orig/include/linux/ssb/ssb_driver_pci.h 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/include/linux/ssb/ssb_driver_pci.h 2008-03-19 11:16:18.000000000 +0100
+@@ -1,6 +1,11 @@
+ #ifndef LINUX_SSB_PCICORE_H_
+ #define LINUX_SSB_PCICORE_H_
+
++#include <linux/types.h>
++
++struct pci_dev;
++
++
+ #ifdef CONFIG_SSB_DRIVER_PCICORE
+
+ /* PCI core registers. */
+@@ -88,6 +93,9 @@ extern void ssb_pcicore_init(struct ssb_
+ extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
+ struct ssb_device *dev);
+
++int ssb_pcicore_plat_dev_init(struct pci_dev *d);
++int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
++
+
+ #else /* CONFIG_SSB_DRIVER_PCICORE */
+
+@@ -107,5 +115,16 @@ int ssb_pcicore_dev_irqvecs_enable(struc
+ return 0;
+ }
+
++static inline
++int ssb_pcicore_plat_dev_init(struct pci_dev *d)
++{
++ return -ENODEV;
++}
++static inline
++int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
++{
++ return -ENODEV;
++}
++
+ #endif /* CONFIG_SSB_DRIVER_PCICORE */
+ #endif /* LINUX_SSB_PCICORE_H_ */
+Index: linux-2.6.23.16/drivers/ssb/main.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/main.c 2008-03-19 11:16:18.000000000 +0100
+@@ -14,6 +14,7 @@
+ #include <linux/io.h>
+ #include <linux/ssb/ssb.h>
+ #include <linux/ssb/ssb_regs.h>
++#include <linux/ssb/ssb_driver_gige.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/pci.h>
+
+@@ -68,6 +69,25 @@ found:
+ }
+ #endif /* CONFIG_SSB_PCIHOST */
+
++int ssb_for_each_bus_call(unsigned long data,
++ int (*func)(struct ssb_bus *bus, unsigned long data))
++{
++ struct ssb_bus *bus;
++ int res;
++
++ ssb_buses_lock();
++ list_for_each_entry(bus, &buses, list) {
++ res = func(bus, data);
++ if (res >= 0) {
++ ssb_buses_unlock();
++ return res;
++ }
++ }
++ ssb_buses_unlock();
++
++ return -ENODEV;
++}
++
+ static struct ssb_device *ssb_device_get(struct ssb_device *dev)
+ {
+ if (dev)
+@@ -1175,7 +1195,14 @@ static int __init ssb_modinit(void)
+ err = b43_pci_ssb_bridge_init();
+ if (err) {
+ ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
+- "initialization failed");
++ "initialization failed\n");
++ /* don't fail SSB init because of this */
++ err = 0;
++ }
++ err = ssb_gige_init();
++ if (err) {
++ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
++ "driver initialization failed\n");
+ /* don't fail SSB init because of this */
+ err = 0;
+ }
+@@ -1189,6 +1216,7 @@ fs_initcall(ssb_modinit);
+
+ static void __exit ssb_modexit(void)
+ {
++ ssb_gige_exit();
+ b43_pci_ssb_bridge_exit();
+ bus_unregister(&ssb_bustype);
+ }
+Index: linux-2.6.23.16/drivers/ssb/ssb_private.h
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/ssb_private.h 2008-03-19 11:16:15.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/ssb_private.h 2008-03-19 11:16:18.000000000 +0100
+@@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 pllty
+ extern int ssb_devices_freeze(struct ssb_bus *bus);
+ extern int ssb_devices_thaw(struct ssb_bus *bus);
+ extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
++int ssb_for_each_bus_call(unsigned long data,
++ int (*func)(struct ssb_bus *bus, unsigned long data));
+
+ /* b43_pci_bridge.c */
+ #ifdef CONFIG_SSB_PCIHOST
+Index: linux-2.6.23.16/drivers/net/tg3.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/tg3.c 2008-03-19 11:16:15.000000000 +0100
++++ linux-2.6.23.16/drivers/net/tg3.c 2008-03-19 11:16:18.000000000 +0100
+@@ -38,6 +38,7 @@
+ #include <linux/workqueue.h>
+ #include <linux/prefetch.h>
+ #include <linux/dma-mapping.h>
++#include <linux/ssb/ssb_driver_gige.h>
+
+ #include <net/checksum.h>
+ #include <net/ip.h>
+@@ -410,8 +411,9 @@ static void _tw32_flush(struct tg3 *tp,
+ static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
+ {
+ tp->write32_mbox(tp, off, val);
+- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
++ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
++ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
++ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
+ tp->read32_mbox(tp, off);
+ }
+
+@@ -623,7 +625,7 @@ static void tg3_switch_clocks(struct tg3
+
+ #define PHY_BUSY_LOOPS 5000
+
+-static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
+ {
+ u32 frame_val;
+ unsigned int loops;
+@@ -637,7 +639,7 @@ static int tg3_readphy(struct tg3 *tp, i
+
+ *val = 0x0;
+
+- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ MI_COM_PHY_ADDR_MASK);
+ frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ MI_COM_REG_ADDR_MASK);
+@@ -672,7 +674,12 @@ static int tg3_readphy(struct tg3 *tp, i
+ return ret;
+ }
+
+-static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
++{
++ return __tg3_readphy(tp, PHY_ADDR, reg, val);
++}
++
++static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
+ {
+ u32 frame_val;
+ unsigned int loops;
+@@ -688,7 +695,7 @@ static int tg3_writephy(struct tg3 *tp,
+ udelay(80);
+ }
+
+- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
++ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
+ MI_COM_PHY_ADDR_MASK);
+ frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
+ MI_COM_REG_ADDR_MASK);
+@@ -721,6 +728,11 @@ static int tg3_writephy(struct tg3 *tp,
+ return ret;
+ }
+
++static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
++{
++ return __tg3_writephy(tp, PHY_ADDR, reg, val);
++}
++
+ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
+ {
+ u32 phy;
+@@ -1988,6 +2000,14 @@ static int tg3_setup_copper_phy(struct t
+ tp->link_config.active_duplex = current_duplex;
+ }
+
++ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
++ current_link_up = 1;
++ current_speed = SPEED_1000; //FIXME
++ current_duplex = DUPLEX_FULL;
++ tp->link_config.active_speed = current_speed;
++ tp->link_config.active_duplex = current_duplex;
++ }
++
+ if (current_link_up == 1 &&
+ (tp->link_config.active_duplex == DUPLEX_FULL) &&
+ (tp->link_config.autoneg == AUTONEG_ENABLE)) {
+@@ -4813,6 +4833,11 @@ static int tg3_poll_fw(struct tg3 *tp)
+ int i;
+ u32 val;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ /* Wait up to 20ms for init done. */
+ for (i = 0; i < 200; i++) {
+@@ -5040,6 +5065,14 @@ static int tg3_chip_reset(struct tg3 *tp
+ tw32(0x5000, 0x400);
+ }
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* BCM4785: In order to avoid repercussions from using potentially
++ * defective internal ROM, stop the Rx RISC CPU, which is not
++ * required. */
++ tg3_stop_fw(tp);
++ tg3_halt_cpu(tp, RX_CPU_BASE);
++ }
++
+ tw32(GRC_MODE, tp->grc_mode);
+
+ if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
+@@ -5308,9 +5341,12 @@ static int tg3_halt_cpu(struct tg3 *tp,
+ return -ENODEV;
+ }
+
+- /* Clear firmware's nvram arbitration. */
+- if (tp->tg3_flags & TG3_FLAG_NVRAM)
+- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
++ /* Clear firmware's nvram arbitration. */
++ if (tp->tg3_flags & TG3_FLAG_NVRAM)
++ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
++ }
++
+ return 0;
+ }
+
+@@ -5391,6 +5427,11 @@ static int tg3_load_5701_a0_firmware_fix
+ struct fw_info info;
+ int err, i;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ info.text_base = TG3_FW_TEXT_ADDR;
+ info.text_len = TG3_FW_TEXT_LEN;
+ info.text_data = &tg3FwText[0];
+@@ -5949,6 +5990,11 @@ static int tg3_load_tso_firmware(struct
+ unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
+ int err, i;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't use firmware. */
++ return 0;
++ }
++
+ if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
+ return 0;
+
+@@ -6850,6 +6896,11 @@ static void tg3_timer(unsigned long __op
+
+ spin_lock(&tp->lock);
+
++ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
++ /* BCM4785: Flush posted writes from GbE to host memory. */
++ tr32(HOSTCC_MODE);
++ }
++
+ if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
+ /* All of this garbage is because when using non-tagged
+ * IRQ status the mailbox/status_block protocol the chip
+@@ -8432,6 +8483,11 @@ static int tg3_test_nvram(struct tg3 *tp
+ u32 *buf, csum, magic;
+ int i, j, err = 0, size;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* We don't have NVRAM. */
++ return 0;
++ }
++
+ if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
+ return -EIO;
+
+@@ -9154,7 +9210,7 @@ static int tg3_ioctl(struct net_device *
+ return -EAGAIN;
+
+ spin_lock_bh(&tp->lock);
+- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
++ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
+ spin_unlock_bh(&tp->lock);
+
+ data->val_out = mii_regval;
+@@ -9173,7 +9229,7 @@ static int tg3_ioctl(struct net_device *
+ return -EAGAIN;
+
+ spin_lock_bh(&tp->lock);
+- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
++ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
+ spin_unlock_bh(&tp->lock);
+
+ return err;
+@@ -9571,6 +9627,12 @@ static void __devinit tg3_get_5906_nvram
+ /* Chips other than 5700/5701 use the NVRAM for fetching info. */
+ static void __devinit tg3_nvram_init(struct tg3 *tp)
+ {
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
++ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
++ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
++ return;
++ }
++
+ tw32_f(GRC_EEPROM_ADDR,
+ (EEPROM_ADDR_FSM_RESET |
+ (EEPROM_DEFAULT_CLOCK_PERIOD <<
+@@ -9706,6 +9768,9 @@ static int tg3_nvram_read(struct tg3 *tp
+ {
+ int ret;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++ return -ENODEV;
++
+ if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
+ return tg3_nvram_read_using_eeprom(tp, offset, val);
+
+@@ -9938,6 +10003,9 @@ static int tg3_nvram_write_block(struct
+ {
+ int ret;
+
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++ return -ENODEV;
++
+ if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
+ tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
+ ~GRC_LCLCTRL_GPIO_OUTPUT1);
+@@ -10804,7 +10872,6 @@ static int __devinit tg3_get_invariants(
+ tp->write32 = tg3_write_flush_reg32;
+ }
+
+-
+ if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
+ (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
+ tp->write32_tx_mbox = tg3_write32_tx_mbox;
+@@ -10840,6 +10907,11 @@ static int __devinit tg3_get_invariants(
+ GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
+ tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
+
++ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
++ tp->write32_tx_mbox = tg3_write_flush_reg32;
++ tp->write32_rx_mbox = tg3_write_flush_reg32;
++ }
++
+ /* Get eeprom hw config before calling tg3_set_power_state().
+ * In particular, the TG3_FLG2_IS_NIC flag must be
+ * determined before calling tg3_set_power_state() so that
+@@ -11184,6 +11256,10 @@ static int __devinit tg3_get_device_addr
+ }
+
+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
++ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
++ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
++ }
++ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
+ #ifdef CONFIG_SPARC64
+ if (!tg3_get_default_macaddr_sparc(tp))
+ return 0;
+@@ -11675,6 +11751,7 @@ static char * __devinit tg3_phy_string(s
+ case PHY_ID_BCM5704: return "5704";
+ case PHY_ID_BCM5705: return "5705";
+ case PHY_ID_BCM5750: return "5750";
++ case PHY_ID_BCM5750_2: return "5750-2";
+ case PHY_ID_BCM5752: return "5752";
+ case PHY_ID_BCM5714: return "5714";
+ case PHY_ID_BCM5780: return "5780";
+@@ -11859,6 +11936,13 @@ static int __devinit tg3_init_one(struct
+ tp->msg_enable = tg3_debug;
+ else
+ tp->msg_enable = TG3_DEF_MSG_ENABLE;
++ if (pdev_is_ssb_gige_core(pdev)) {
++ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
++ if (ssb_gige_must_flush_posted_writes(pdev))
++ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
++ if (ssb_gige_have_roboswitch(pdev))
++ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
++ }
+
+ /* The word/byte swap controls here control register access byte
+ * swapping. DMA data byte swapping is controlled in the GRC_MODE
+Index: linux-2.6.23.16/drivers/net/tg3.h
+===================================================================
+--- linux-2.6.23.16.orig/drivers/net/tg3.h 2008-03-19 11:16:15.000000000 +0100
++++ linux-2.6.23.16/drivers/net/tg3.h 2008-03-19 11:16:18.000000000 +0100
+@@ -2279,6 +2279,10 @@ struct tg3 {
+ #define TG3_FLG2_PHY_JITTER_BUG 0x20000000
+ #define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
+ #define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
++ u32 tg3_flags3;
++#define TG3_FLG3_IS_SSB_CORE 0x00000001
++#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000002
++#define TG3_FLG3_ROBOSWITCH 0x00000004
+
+ struct timer_list timer;
+ u16 timer_counter;
+@@ -2333,6 +2337,7 @@ struct tg3 {
+ #define PHY_ID_BCM5714 0x60008340
+ #define PHY_ID_BCM5780 0x60008350
+ #define PHY_ID_BCM5755 0xbc050cc0
++#define PHY_ID_BCM5750_2 0xbc050cd0
+ #define PHY_ID_BCM5787 0xbc050ce0
+ #define PHY_ID_BCM5756 0xbc050ed0
+ #define PHY_ID_BCM5906 0xdc00ac40
+@@ -2364,7 +2369,8 @@ struct tg3 {
+ (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
+ (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
+ (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
+- (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002)
++ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002 || \
++ (X) == PHY_ID_BCM5750_2)
+
+ struct tg3_hw_stats *hw_stats;
+ dma_addr_t stats_mapping;
+Index: linux-2.6.23.16/drivers/ssb/driver_mipscore.c
+===================================================================
+--- linux-2.6.23.16.orig/drivers/ssb/driver_mipscore.c 2008-03-19 11:16:18.000000000 +0100
++++ linux-2.6.23.16/drivers/ssb/driver_mipscore.c 2008-03-19 11:16:18.000000000 +0100
+@@ -211,6 +211,7 @@ void ssb_mipscore_init(struct ssb_mipsco
+ /* fallthrough */
+ case SSB_DEV_PCI:
+ case SSB_DEV_ETHERNET:
++ case SSB_DEV_ETHERNET_GBIT:
+ case SSB_DEV_80211:
+ case SSB_DEV_USB20_HOST:
+ /* These devices get their own IRQ line if available, the rest goes on IRQ0 */