aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch')
-rw-r--r--target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch1226
1 files changed, 0 insertions, 1226 deletions
diff --git a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
deleted file mode 100644
index 9e308133cb..0000000000
--- a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch
+++ /dev/null
@@ -1,1226 +0,0 @@
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -120,4 +120,13 @@
-
- If unsure, say N
-
-+config SSB_DRIVER_GIGE
-+ bool "SSB Broadcom Gigabit Ethernet driver"
-+ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS
-+ help
-+ Driver for the Sonics Silicon Backplane attached
-+ Broadcom Gigabit Ethernet.
-+
-+ If unsure, say N
-+
- endmenu
---- a/drivers/ssb/Makefile
-+++ b/drivers/ssb/Makefile
-@@ -11,6 +11,7 @@
- ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
- ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o
- ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
-+ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o
-
- # b43 pci-ssb-bridge driver
- # Not strictly a part of SSB, but kept here for convenience
---- /dev/null
-+++ b/drivers/ssb/driver_gige.c
-@@ -0,0 +1,294 @@
-+/*
-+ * Sonics Silicon Backplane
-+ * Broadcom Gigabit Ethernet core driver
-+ *
-+ * Copyright 2008, Broadcom Corporation
-+ * Copyright 2008, Michael Buesch <mb@bu3sch.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-+#include <linux/pci.h>
-+#include <linux/pci_regs.h>
-+
-+
-+/*
-+MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver");
-+MODULE_AUTHOR("Michael Buesch");
-+MODULE_LICENSE("GPL");
-+*/
-+
-+static const struct ssb_device_id ssb_gige_tbl[] = {
-+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV),
-+ SSB_DEVTABLE_END
-+};
-+/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */
-+
-+
-+static inline u8 gige_read8(struct ssb_gige *dev, u16 offset)
-+{
-+ return ssb_read8(dev->dev, offset);
-+}
-+
-+static inline u16 gige_read16(struct ssb_gige *dev, u16 offset)
-+{
-+ return ssb_read16(dev->dev, offset);
-+}
-+
-+static inline u32 gige_read32(struct ssb_gige *dev, u16 offset)
-+{
-+ return ssb_read32(dev->dev, offset);
-+}
-+
-+static inline void gige_write8(struct ssb_gige *dev,
-+ u16 offset, u8 value)
-+{
-+ ssb_write8(dev->dev, offset, value);
-+}
-+
-+static inline void gige_write16(struct ssb_gige *dev,
-+ u16 offset, u16 value)
-+{
-+ ssb_write16(dev->dev, offset, value);
-+}
-+
-+static inline void gige_write32(struct ssb_gige *dev,
-+ u16 offset, u32 value)
-+{
-+ ssb_write32(dev->dev, offset, value);
-+}
-+
-+static inline
-+u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset)
-+{
-+ BUG_ON(offset >= 256);
-+ return gige_read8(dev, SSB_GIGE_PCICFG + offset);
-+}
-+
-+static inline
-+u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset)
-+{
-+ BUG_ON(offset >= 256);
-+ return gige_read16(dev, SSB_GIGE_PCICFG + offset);
-+}
-+
-+static inline
-+u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset)
-+{
-+ BUG_ON(offset >= 256);
-+ return gige_read32(dev, SSB_GIGE_PCICFG + offset);
-+}
-+
-+static inline
-+void gige_pcicfg_write8(struct ssb_gige *dev,
-+ unsigned int offset, u8 value)
-+{
-+ BUG_ON(offset >= 256);
-+ gige_write8(dev, SSB_GIGE_PCICFG + offset, value);
-+}
-+
-+static inline
-+void gige_pcicfg_write16(struct ssb_gige *dev,
-+ unsigned int offset, u16 value)
-+{
-+ BUG_ON(offset >= 256);
-+ gige_write16(dev, SSB_GIGE_PCICFG + offset, value);
-+}
-+
-+static inline
-+void gige_pcicfg_write32(struct ssb_gige *dev,
-+ unsigned int offset, u32 value)
-+{
-+ BUG_ON(offset >= 256);
-+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value);
-+}
-+
-+static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-+ int reg, int size, u32 *val)
-+{
-+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
-+ unsigned long flags;
-+
-+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ if (reg >= 256)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+ switch (size) {
-+ case 1:
-+ *val = gige_pcicfg_read8(dev, reg);
-+ break;
-+ case 2:
-+ *val = gige_pcicfg_read16(dev, reg);
-+ break;
-+ case 4:
-+ *val = gige_pcicfg_read32(dev, reg);
-+ break;
-+ default:
-+ WARN_ON(1);
-+ }
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-+ int reg, int size, u32 val)
-+{
-+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops);
-+ unsigned long flags;
-+
-+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+ if (reg >= 256)
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ spin_lock_irqsave(&dev->lock, flags);
-+ switch (size) {
-+ case 1:
-+ gige_pcicfg_write8(dev, reg, val);
-+ break;
-+ case 2:
-+ gige_pcicfg_write16(dev, reg, val);
-+ break;
-+ case 4:
-+ gige_pcicfg_write32(dev, reg, val);
-+ break;
-+ default:
-+ WARN_ON(1);
-+ }
-+ spin_unlock_irqrestore(&dev->lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id)
-+{
-+ struct ssb_gige *dev;
-+ u32 base, tmslow, tmshigh;
-+
-+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-+ if (!dev)
-+ return -ENOMEM;
-+ dev->dev = sdev;
-+
-+ spin_lock_init(&dev->lock);
-+ dev->pci_controller.pci_ops = &dev->pci_ops;
-+ dev->pci_controller.io_resource = &dev->io_resource;
-+ dev->pci_controller.mem_resource = &dev->mem_resource;
-+ dev->pci_controller.io_map_base = 0x800;
-+ dev->pci_ops.read = ssb_gige_pci_read_config;
-+ dev->pci_ops.write = ssb_gige_pci_write_config;
-+
-+ dev->io_resource.name = SSB_GIGE_IO_RES_NAME;
-+ dev->io_resource.start = 0x800;
-+ dev->io_resource.end = 0x8FF;
-+ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
-+
-+ if (!ssb_device_is_enabled(sdev))
-+ ssb_device_enable(sdev, 0);
-+
-+ /* Setup BAR0. This is a 64k MMIO region. */
-+ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1));
-+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base);
-+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0);
-+
-+ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME;
-+ dev->mem_resource.start = base;
-+ dev->mem_resource.end = base + 0x10000 - 1;
-+ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
-+
-+ /* Enable the memory region. */
-+ gige_pcicfg_write16(dev, PCI_COMMAND,
-+ gige_pcicfg_read16(dev, PCI_COMMAND)
-+ | PCI_COMMAND_MEMORY);
-+
-+ /* Write flushing is controlled by the Flush Status Control register.
-+ * We want to flush every register write with a timeout and we want
-+ * to disable the IRQ mask while flushing to avoid concurrency.
-+ * Note that automatic write flushing does _not_ work from
-+ * an IRQ handler. The driver must flush manually by reading a register.
-+ */
-+ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068);
-+
-+ /* Check if we have an RGMII or GMII PHY-bus.
-+ * On RGMII do not bypass the DLLs */
-+ tmslow = ssb_read32(sdev, SSB_TMSLOW);
-+ tmshigh = ssb_read32(sdev, SSB_TMSHIGH);
-+ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) {
-+ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS;
-+ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS;
-+ dev->has_rgmii = 1;
-+ } else {
-+ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS;
-+ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS;
-+ dev->has_rgmii = 0;
-+ }
-+ tmslow |= SSB_GIGE_TMSLOW_DLLEN;
-+ ssb_write32(sdev, SSB_TMSLOW, tmslow);
-+
-+ ssb_set_drvdata(sdev, dev);
-+ register_pci_controller(&dev->pci_controller);
-+
-+ return 0;
-+}
-+
-+bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
-+{
-+ if (!pdev->resource[0].name)
-+ return 0;
-+ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0);
-+}
-+EXPORT_SYMBOL(pdev_is_ssb_gige_core);
-+
-+int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-+ struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
-+ struct resource *res;
-+
-+ if (pdev->bus->ops != &dev->pci_ops) {
-+ /* The PCI device is not on this SSB GigE bridge device. */
-+ return -ENODEV;
-+ }
-+
-+ /* Fixup the PCI resources. */
-+ res = &(pdev->resource[0]);
-+ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED;
-+ res->name = dev->mem_resource.name;
-+ res->start = dev->mem_resource.start;
-+ res->end = dev->mem_resource.end;
-+
-+ /* Fixup interrupt lines. */
-+ pdev->irq = ssb_mips_irq(sdev) + 2;
-+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq);
-+
-+ return 0;
-+}
-+
-+int ssb_gige_map_irq(struct ssb_device *sdev,
-+ const struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = ssb_get_drvdata(sdev);
-+
-+ if (pdev->bus->ops != &dev->pci_ops) {
-+ /* The PCI device is not on this SSB GigE bridge device. */
-+ return -ENODEV;
-+ }
-+
-+ return ssb_mips_irq(sdev) + 2;
-+}
-+
-+static struct ssb_driver ssb_gige_driver = {
-+ .name = "BCM-GigE",
-+ .id_table = ssb_gige_tbl,
-+ .probe = ssb_gige_probe,
-+};
-+
-+int ssb_gige_init(void)
-+{
-+ return ssb_driver_register(&ssb_gige_driver);
-+}
---- /dev/null
-+++ b/include/linux/ssb/ssb_driver_gige.h
-@@ -0,0 +1,174 @@
-+#ifndef LINUX_SSB_DRIVER_GIGE_H_
-+#define LINUX_SSB_DRIVER_GIGE_H_
-+
-+#include <linux/ssb/ssb.h>
-+#include <linux/pci.h>
-+#include <linux/spinlock.h>
-+
-+
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+
-+
-+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
-+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
-+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
-+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
-+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
-+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
-+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
-+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
-+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
-+
-+/* TM Status High flags */
-+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
-+/* TM Status Low flags */
-+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
-+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
-+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
-+
-+/* Boardflags (low) */
-+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
-+
-+
-+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
-+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
-+
-+struct ssb_gige {
-+ struct ssb_device *dev;
-+
-+ spinlock_t lock;
-+
-+ /* True, if the device has an RGMII bus.
-+ * False, if the device has a GMII bus. */
-+ bool has_rgmii;
-+
-+ /* The PCI controller device. */
-+ struct pci_controller pci_controller;
-+ struct pci_ops pci_ops;
-+ struct resource mem_resource;
-+ struct resource io_resource;
-+};
-+
-+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
-+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
-+
-+/* Convert a pci_dev pointer to a ssb_gige pointer. */
-+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
-+{
-+ if (!pdev_is_ssb_gige_core(pdev))
-+ return NULL;
-+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
-+}
-+
-+/* Returns whether the PHY is connected by an RGMII bus. */
-+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ return (dev ? dev->has_rgmii : 0);
-+}
-+
-+/* Returns whether we have a Roboswitch. */
-+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (dev)
-+ return !!(dev->dev->bus->sprom.boardflags_lo &
-+ SSB_GIGE_BFL_ROBOSWITCH);
-+ return 0;
-+}
-+
-+/* Returns whether we can only do one DMA at once. */
-+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (dev)
-+ return ((dev->dev->bus->chip_id == 0x4785) &&
-+ (dev->dev->bus->chip_rev < 2));
-+ return 0;
-+}
-+
-+/* Returns whether we must flush posted writes. */
-+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
-+{
-+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
-+ if (dev)
-+ return (dev->dev->bus->chip_id == 0x4785);
-+ return 0;
-+}
-+
-+extern char * nvram_get(const char *name);
-+/* Get the device MAC address */
-+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
-+{
-+#ifdef CONFIG_BCM947XX
-+ char *res = nvram_get("et0macaddr");
-+ if (res)
-+ memcpy(macaddr, res, 6);
-+#endif
-+}
-+
-+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-+ struct pci_dev *pdev);
-+extern int ssb_gige_map_irq(struct ssb_device *sdev,
-+ const struct pci_dev *pdev);
-+
-+/* The GigE driver is not a standalone module, because we don't have support
-+ * for unregistering the driver. So we could not unload the module anyway. */
-+extern int ssb_gige_init(void);
-+static inline void ssb_gige_exit(void)
-+{
-+ /* Currently we can not unregister the GigE driver,
-+ * because we can not unregister the PCI bridge. */
-+ BUG();
-+}
-+
-+
-+#else /* CONFIG_SSB_DRIVER_GIGE */
-+/* Gigabit Ethernet driver disabled */
-+
-+
-+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
-+ struct pci_dev *pdev)
-+{
-+ return -ENOSYS;
-+}
-+static inline int ssb_gige_map_irq(struct ssb_device *sdev,
-+ const struct pci_dev *pdev)
-+{
-+ return -ENOSYS;
-+}
-+static inline int ssb_gige_init(void)
-+{
-+ return 0;
-+}
-+static inline void ssb_gige_exit(void)
-+{
-+}
-+
-+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
-+{
-+ return NULL;
-+}
-+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
-+{
-+ return 0;
-+}
-+
-+#endif /* CONFIG_SSB_DRIVER_GIGE */
-+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -60,74 +60,6 @@
- /* Core to access the external PCI config space. Can only have one. */
- static struct ssb_pcicore *extpci_core;
-
--static u32 ssb_pcicore_pcibus_iobase = 0x100;
--static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
--
--int pcibios_plat_dev_init(struct pci_dev *d)
--{
-- struct resource *res;
-- int pos, size;
-- u32 *base;
--
-- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
-- pci_name(d));
--
-- /* Fix up resource bases */
-- for (pos = 0; pos < 6; pos++) {
-- res = &d->resource[pos];
-- if (res->flags & IORESOURCE_IO)
-- base = &ssb_pcicore_pcibus_iobase;
-- else
-- base = &ssb_pcicore_pcibus_membase;
-- res->flags |= IORESOURCE_PCI_FIXED;
-- if (res->end) {
-- size = res->end - res->start + 1;
-- if (*base & (size - 1))
-- *base = (*base + size) & ~(size - 1);
-- res->start = *base;
-- res->end = res->start + size - 1;
-- *base += size;
-- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-- }
-- /* Fix up PCI bridge BAR0 only */
-- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
-- break;
-- }
-- /* Fix up interrupt lines */
-- d->irq = ssb_mips_irq(extpci_core->dev) + 2;
-- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
--
-- return 0;
--}
--
--static void __init ssb_fixup_pcibridge(struct pci_dev *dev)
--{
-- u8 lat;
--
-- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
-- return;
--
-- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
--
-- /* Enable PCI bridge bus mastering and memory space */
-- pci_set_master(dev);
-- pcibios_enable_device(dev, ~0);
--
-- /* Enable PCI bridge BAR1 prefetch and burst */
-- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
--
-- /* Make sure our latency is high enough to handle the devices behind us */
-- lat = 168;
-- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-- pci_name(dev), lat);
-- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
--}
--DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
--
--int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
--{
-- return ssb_mips_irq(extpci_core->dev) + 2;
--}
-
- static u32 get_cfgspace_addr(struct ssb_pcicore *pc,
- unsigned int bus, unsigned int dev,
-@@ -317,6 +249,92 @@
- .mem_offset = 0x24000000,
- };
-
-+static u32 ssb_pcicore_pcibus_iobase = 0x100;
-+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA;
-+
-+/* This function is called when doing a pci_enable_device().
-+ * We must first check if the device is a device on the PCI-core bridge. */
-+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
-+{
-+ struct resource *res;
-+ int pos, size;
-+ u32 *base;
-+
-+ if (d->bus->ops != &ssb_pcicore_pciops) {
-+ /* This is not a device on the PCI-core bridge. */
-+ return -ENODEV;
-+ }
-+
-+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n",
-+ pci_name(d));
-+
-+ /* Fix up resource bases */
-+ for (pos = 0; pos < 6; pos++) {
-+ res = &d->resource[pos];
-+ if (res->flags & IORESOURCE_IO)
-+ base = &ssb_pcicore_pcibus_iobase;
-+ else
-+ base = &ssb_pcicore_pcibus_membase;
-+ res->flags |= IORESOURCE_PCI_FIXED;
-+ if (res->end) {
-+ size = res->end - res->start + 1;
-+ if (*base & (size - 1))
-+ *base = (*base + size) & ~(size - 1);
-+ res->start = *base;
-+ res->end = res->start + size - 1;
-+ *base += size;
-+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start);
-+ }
-+ /* Fix up PCI bridge BAR0 only */
-+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0)
-+ break;
-+ }
-+ /* Fix up interrupt lines */
-+ d->irq = ssb_mips_irq(extpci_core->dev) + 2;
-+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq);
-+
-+ return 0;
-+}
-+
-+/* Early PCI fixup for a device on the PCI-core bridge. */
-+static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev)
-+{
-+ u8 lat;
-+
-+ if (dev->bus->ops != &ssb_pcicore_pciops) {
-+ /* This is not a device on the PCI-core bridge. */
-+ return;
-+ }
-+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0)
-+ return;
-+
-+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev));
-+
-+ /* Enable PCI bridge bus mastering and memory space */
-+ pci_set_master(dev);
-+ pcibios_enable_device(dev, ~0);
-+
-+ /* Enable PCI bridge BAR1 prefetch and burst */
-+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
-+
-+ /* Make sure our latency is high enough to handle the devices behind us */
-+ lat = 168;
-+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n",
-+ pci_name(dev), lat);
-+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-+}
-+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge);
-+
-+/* PCI device IRQ mapping. */
-+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (dev->bus->ops != &ssb_pcicore_pciops) {
-+ /* This is not a device on the PCI-core bridge. */
-+ return -ENODEV;
-+ }
-+ return ssb_mips_irq(extpci_core->dev) + 2;
-+}
-+
- static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc)
- {
- u32 val;
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -10,6 +10,9 @@
-
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
-+#include <linux/ssb/ssb_driver_pci.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-+#include <linux/pci.h>
-
- #include "ssb_private.h"
-
-@@ -130,3 +133,90 @@
- return res;
- }
- EXPORT_SYMBOL(ssb_gpio_polarity);
-+
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data)
-+{
-+ struct pci_dev *pdev = (struct pci_dev *)data;
-+ struct ssb_device *dev;
-+ unsigned int i;
-+ int res;
-+
-+ for (i = 0; i < bus->nr_devices; i++) {
-+ dev = &(bus->devices[i]);
-+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
-+ continue;
-+ if (!dev->dev ||
-+ !dev->dev->driver ||
-+ !device_is_registered(dev->dev))
-+ continue;
-+ res = ssb_gige_pcibios_plat_dev_init(dev, pdev);
-+ if (res >= 0)
-+ return res;
-+ }
-+
-+ return -ENODEV;
-+}
-+#endif /* CONFIG_SSB_DRIVER_GIGE */
-+
-+int ssb_pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ int err;
-+
-+ err = ssb_pcicore_plat_dev_init(dev);
-+ if (!err)
-+ return 0;
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback);
-+ if (err >= 0)
-+ return err;
-+#endif
-+ /* This is not a PCI device on any SSB device. */
-+
-+ return -ENODEV;
-+}
-+
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data)
-+{
-+ const struct pci_dev *pdev = (const struct pci_dev *)data;
-+ struct ssb_device *dev;
-+ unsigned int i;
-+ int res;
-+
-+ for (i = 0; i < bus->nr_devices; i++) {
-+ dev = &(bus->devices[i]);
-+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT)
-+ continue;
-+ if (!dev->dev ||
-+ !dev->dev->driver ||
-+ !device_is_registered(dev->dev))
-+ continue;
-+ res = ssb_gige_map_irq(dev, pdev);
-+ if (res >= 0)
-+ return res;
-+ }
-+
-+ return -ENODEV;
-+}
-+#endif /* CONFIG_SSB_DRIVER_GIGE */
-+
-+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ int res;
-+
-+ /* Check if this PCI device is a device on a SSB bus or device
-+ * and return the IRQ number for it. */
-+
-+ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin);
-+ if (res >= 0)
-+ return res;
-+#ifdef CONFIG_SSB_DRIVER_GIGE
-+ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback);
-+ if (res >= 0)
-+ return res;
-+#endif
-+ /* This is not a PCI device on any SSB device. */
-+
-+ return -ENODEV;
-+}
---- a/include/linux/ssb/ssb.h
-+++ b/include/linux/ssb/ssb.h
-@@ -422,5 +422,12 @@
- extern u32 ssb_admatch_base(u32 adm);
- extern u32 ssb_admatch_size(u32 adm);
-
-+/* PCI device mapping and fixup routines.
-+ * Called from the architecture pcibios init code.
-+ * These are only available on SSB_EMBEDDED configurations. */
-+#ifdef CONFIG_SSB_EMBEDDED
-+int ssb_pcibios_plat_dev_init(struct pci_dev *dev);
-+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-+#endif /* CONFIG_SSB_EMBEDDED */
-
- #endif /* LINUX_SSB_H_ */
---- a/include/linux/ssb/ssb_driver_pci.h
-+++ b/include/linux/ssb/ssb_driver_pci.h
-@@ -1,6 +1,11 @@
- #ifndef LINUX_SSB_PCICORE_H_
- #define LINUX_SSB_PCICORE_H_
-
-+#include <linux/types.h>
-+
-+struct pci_dev;
-+
-+
- #ifdef CONFIG_SSB_DRIVER_PCICORE
-
- /* PCI core registers. */
-@@ -88,6 +93,9 @@
- extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc,
- struct ssb_device *dev);
-
-+int ssb_pcicore_plat_dev_init(struct pci_dev *d);
-+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
-+
-
- #else /* CONFIG_SSB_DRIVER_PCICORE */
-
-@@ -107,5 +115,16 @@
- return 0;
- }
-
-+static inline
-+int ssb_pcicore_plat_dev_init(struct pci_dev *d)
-+{
-+ return -ENODEV;
-+}
-+static inline
-+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return -ENODEV;
-+}
-+
- #endif /* CONFIG_SSB_DRIVER_PCICORE */
- #endif /* LINUX_SSB_PCICORE_H_ */
---- a/drivers/ssb/main.c
-+++ b/drivers/ssb/main.c
-@@ -14,6 +14,7 @@
- #include <linux/io.h>
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_regs.h>
-+#include <linux/ssb/ssb_driver_gige.h>
- #include <linux/dma-mapping.h>
- #include <linux/pci.h>
-
-@@ -68,6 +69,25 @@
- }
- #endif /* CONFIG_SSB_PCIHOST */
-
-+int ssb_for_each_bus_call(unsigned long data,
-+ int (*func)(struct ssb_bus *bus, unsigned long data))
-+{
-+ struct ssb_bus *bus;
-+ int res;
-+
-+ ssb_buses_lock();
-+ list_for_each_entry(bus, &buses, list) {
-+ res = func(bus, data);
-+ if (res >= 0) {
-+ ssb_buses_unlock();
-+ return res;
-+ }
-+ }
-+ ssb_buses_unlock();
-+
-+ return -ENODEV;
-+}
-+
- static struct ssb_device *ssb_device_get(struct ssb_device *dev)
- {
- if (dev)
-@@ -1175,7 +1195,14 @@
- err = b43_pci_ssb_bridge_init();
- if (err) {
- ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge "
-- "initialization failed");
-+ "initialization failed\n");
-+ /* don't fail SSB init because of this */
-+ err = 0;
-+ }
-+ err = ssb_gige_init();
-+ if (err) {
-+ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet "
-+ "driver initialization failed\n");
- /* don't fail SSB init because of this */
- err = 0;
- }
-@@ -1189,6 +1216,7 @@
-
- static void __exit ssb_modexit(void)
- {
-+ ssb_gige_exit();
- b43_pci_ssb_bridge_exit();
- bus_unregister(&ssb_bustype);
- }
---- a/drivers/ssb/ssb_private.h
-+++ b/drivers/ssb/ssb_private.h
-@@ -118,6 +118,8 @@
- extern int ssb_devices_freeze(struct ssb_bus *bus);
- extern int ssb_devices_thaw(struct ssb_bus *bus);
- extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev);
-+int ssb_for_each_bus_call(unsigned long data,
-+ int (*func)(struct ssb_bus *bus, unsigned long data));
-
- /* b43_pci_bridge.c */
- #ifdef CONFIG_SSB_PCIHOST
---- a/drivers/net/tg3.c
-+++ b/drivers/net/tg3.c
-@@ -38,6 +38,7 @@
- #include <linux/workqueue.h>
- #include <linux/prefetch.h>
- #include <linux/dma-mapping.h>
-+#include <linux/ssb/ssb_driver_gige.h>
-
- #include <net/checksum.h>
- #include <net/ip.h>
-@@ -410,8 +411,9 @@
- static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
- {
- tp->write32_mbox(tp, off, val);
-- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
-- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
-+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) ||
-+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
-+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)))
- tp->read32_mbox(tp, off);
- }
-
-@@ -623,7 +625,7 @@
-
- #define PHY_BUSY_LOOPS 5000
-
--static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val)
- {
- u32 frame_val;
- unsigned int loops;
-@@ -637,7 +639,7 @@
-
- *val = 0x0;
-
-- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
-+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- MI_COM_PHY_ADDR_MASK);
- frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- MI_COM_REG_ADDR_MASK);
-@@ -672,7 +674,12 @@
- return ret;
- }
-
--static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val)
-+{
-+ return __tg3_readphy(tp, PHY_ADDR, reg, val);
-+}
-+
-+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val)
- {
- u32 frame_val;
- unsigned int loops;
-@@ -688,7 +695,7 @@
- udelay(80);
- }
-
-- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) &
-+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) &
- MI_COM_PHY_ADDR_MASK);
- frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) &
- MI_COM_REG_ADDR_MASK);
-@@ -721,6 +728,11 @@
- return ret;
- }
-
-+static int tg3_writephy(struct tg3 *tp, int reg, u32 val)
-+{
-+ return __tg3_writephy(tp, PHY_ADDR, reg, val);
-+}
-+
- static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
- {
- u32 phy;
-@@ -1988,6 +2000,14 @@
- tp->link_config.active_duplex = current_duplex;
- }
-
-+ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) {
-+ current_link_up = 1;
-+ current_speed = SPEED_1000; //FIXME
-+ current_duplex = DUPLEX_FULL;
-+ tp->link_config.active_speed = current_speed;
-+ tp->link_config.active_duplex = current_duplex;
-+ }
-+
- if (current_link_up == 1 &&
- (tp->link_config.active_duplex == DUPLEX_FULL) &&
- (tp->link_config.autoneg == AUTONEG_ENABLE)) {
-@@ -4813,6 +4833,11 @@
- int i;
- u32 val;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- /* Wait up to 20ms for init done. */
- for (i = 0; i < 200; i++) {
-@@ -5040,6 +5065,14 @@
- tw32(0x5000, 0x400);
- }
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* BCM4785: In order to avoid repercussions from using potentially
-+ * defective internal ROM, stop the Rx RISC CPU, which is not
-+ * required. */
-+ tg3_stop_fw(tp);
-+ tg3_halt_cpu(tp, RX_CPU_BASE);
-+ }
-+
- tw32(GRC_MODE, tp->grc_mode);
-
- if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-@@ -5308,9 +5341,12 @@
- return -ENODEV;
- }
-
-- /* Clear firmware's nvram arbitration. */
-- if (tp->tg3_flags & TG3_FLAG_NVRAM)
-- tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) {
-+ /* Clear firmware's nvram arbitration. */
-+ if (tp->tg3_flags & TG3_FLAG_NVRAM)
-+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0);
-+ }
-+
- return 0;
- }
-
-@@ -5391,6 +5427,11 @@
- struct fw_info info;
- int err, i;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- info.text_base = TG3_FW_TEXT_ADDR;
- info.text_len = TG3_FW_TEXT_LEN;
- info.text_data = &tg3FwText[0];
-@@ -5949,6 +5990,11 @@
- unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size;
- int err, i;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't use firmware. */
-+ return 0;
-+ }
-+
- if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
- return 0;
-
-@@ -6850,6 +6896,11 @@
-
- spin_lock(&tp->lock);
-
-+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
-+ /* BCM4785: Flush posted writes from GbE to host memory. */
-+ tr32(HOSTCC_MODE);
-+ }
-+
- if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) {
- /* All of this garbage is because when using non-tagged
- * IRQ status the mailbox/status_block protocol the chip
-@@ -8432,6 +8483,11 @@
- u32 *buf, csum, magic;
- int i, j, err = 0, size;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* We don't have NVRAM. */
-+ return 0;
-+ }
-+
- if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
- return -EIO;
-
-@@ -9154,7 +9210,7 @@
- return -EAGAIN;
-
- spin_lock_bh(&tp->lock);
-- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval);
-+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval);
- spin_unlock_bh(&tp->lock);
-
- data->val_out = mii_regval;
-@@ -9173,7 +9229,7 @@
- return -EAGAIN;
-
- spin_lock_bh(&tp->lock);
-- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in);
-+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in);
- spin_unlock_bh(&tp->lock);
-
- return err;
-@@ -9571,6 +9627,12 @@
- /* Chips other than 5700/5701 use the NVRAM for fetching info. */
- static void __devinit tg3_nvram_init(struct tg3 *tp)
- {
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) {
-+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */
-+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED);
-+ return;
-+ }
-+
- tw32_f(GRC_EEPROM_ADDR,
- (EEPROM_ADDR_FSM_RESET |
- (EEPROM_DEFAULT_CLOCK_PERIOD <<
-@@ -9706,6 +9768,9 @@
- {
- int ret;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+ return -ENODEV;
-+
- if (!(tp->tg3_flags & TG3_FLAG_NVRAM))
- return tg3_nvram_read_using_eeprom(tp, offset, val);
-
-@@ -9938,6 +10003,9 @@
- {
- int ret;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+ return -ENODEV;
-+
- if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
- tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl &
- ~GRC_LCLCTRL_GPIO_OUTPUT1);
-@@ -10804,7 +10872,6 @@
- tp->write32 = tg3_write_flush_reg32;
- }
-
--
- if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
- (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
- tp->write32_tx_mbox = tg3_write32_tx_mbox;
-@@ -10840,6 +10907,11 @@
- GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)))
- tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
-
-+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) {
-+ tp->write32_tx_mbox = tg3_write_flush_reg32;
-+ tp->write32_rx_mbox = tg3_write_flush_reg32;
-+ }
-+
- /* Get eeprom hw config before calling tg3_set_power_state().
- * In particular, the TG3_FLG2_IS_NIC flag must be
- * determined before calling tg3_set_power_state() so that
-@@ -11184,6 +11256,10 @@
- }
-
- if (!is_valid_ether_addr(&dev->dev_addr[0])) {
-+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)
-+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]);
-+ }
-+ if (!is_valid_ether_addr(&dev->dev_addr[0])) {
- #ifdef CONFIG_SPARC64
- if (!tg3_get_default_macaddr_sparc(tp))
- return 0;
-@@ -11675,6 +11751,7 @@
- case PHY_ID_BCM5704: return "5704";
- case PHY_ID_BCM5705: return "5705";
- case PHY_ID_BCM5750: return "5750";
-+ case PHY_ID_BCM5750_2: return "5750-2";
- case PHY_ID_BCM5752: return "5752";
- case PHY_ID_BCM5714: return "5714";
- case PHY_ID_BCM5780: return "5780";
-@@ -11859,6 +11936,13 @@
- tp->msg_enable = tg3_debug;
- else
- tp->msg_enable = TG3_DEF_MSG_ENABLE;
-+ if (pdev_is_ssb_gige_core(pdev)) {
-+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE;
-+ if (ssb_gige_must_flush_posted_writes(pdev))
-+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES;
-+ if (ssb_gige_have_roboswitch(pdev))
-+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH;
-+ }
-
- /* The word/byte swap controls here control register access byte
- * swapping. DMA data byte swapping is controlled in the GRC_MODE
---- a/drivers/net/tg3.h
-+++ b/drivers/net/tg3.h
-@@ -2279,6 +2279,10 @@
- #define TG3_FLG2_PHY_JITTER_BUG 0x20000000
- #define TG3_FLG2_NO_FWARE_REPORTED 0x40000000
- #define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000
-+ u32 tg3_flags3;
-+#define TG3_FLG3_IS_SSB_CORE 0x00000001
-+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000002
-+#define TG3_FLG3_ROBOSWITCH 0x00000004
-
- struct timer_list timer;
- u16 timer_counter;
-@@ -2333,6 +2337,7 @@
- #define PHY_ID_BCM5714 0x60008340
- #define PHY_ID_BCM5780 0x60008350
- #define PHY_ID_BCM5755 0xbc050cc0
-+#define PHY_ID_BCM5750_2 0xbc050cd0
- #define PHY_ID_BCM5787 0xbc050ce0
- #define PHY_ID_BCM5756 0xbc050ed0
- #define PHY_ID_BCM5906 0xdc00ac40
-@@ -2364,7 +2369,8 @@
- (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \
- (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \
- (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \
-- (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002)
-+ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002 || \
-+ (X) == PHY_ID_BCM5750_2)
-
- struct tg3_hw_stats *hw_stats;
- dma_addr_t stats_mapping;
---- a/drivers/ssb/driver_mipscore.c
-+++ b/drivers/ssb/driver_mipscore.c
-@@ -212,6 +212,7 @@
- /* fallthrough */
- case SSB_DEV_PCI:
- case SSB_DEV_ETHERNET:
-+ case SSB_DEV_ETHERNET_GBIT:
- case SSB_DEV_80211:
- case SSB_DEV_USB20_HOST:
- /* These devices get their own IRQ line if available, the rest goes on IRQ0 */