diff options
Diffstat (limited to 'target/linux/brcm2708')
15 files changed, 27 insertions, 27 deletions
diff --git a/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch b/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch index 6173d943d2..ac9bd2ba03 100644 --- a/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch +++ b/target/linux/brcm2708/patches-4.9/031-v4.10-0001-ARM-dts-bcm283x-Define-standard-pinctrl-groups-in-th.patch @@ -23,7 +23,7 @@ Acked-by: Stefan Wahren <stefan.wahren@i2se.com> --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -132,6 +132,209 @@ +@@ -137,6 +137,209 @@ interrupt-controller; #interrupt-cells = <2>; diff --git a/target/linux/brcm2708/patches-4.9/031-v4.10-0008-ARM-bcm2835-dts-add-thermal-node-to-device-tree-of-b.patch b/target/linux/brcm2708/patches-4.9/031-v4.10-0008-ARM-bcm2835-dts-add-thermal-node-to-device-tree-of-b.patch index 4c541a7669..e561e058e5 100644 --- a/target/linux/brcm2708/patches-4.9/031-v4.10-0008-ARM-bcm2835-dts-add-thermal-node-to-device-tree-of-b.patch +++ b/target/linux/brcm2708/patches-4.9/031-v4.10-0008-ARM-bcm2835-dts-add-thermal-node-to-device-tree-of-b.patch @@ -51,7 +51,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> +}; --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -390,6 +390,13 @@ +@@ -395,6 +395,13 @@ interrupts = <2 14>; /* pwa1 */ }; diff --git a/target/linux/brcm2708/patches-4.9/032-v4.11-0001-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch b/target/linux/brcm2708/patches-4.9/032-v4.11-0001-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch index c0d43870ec..17e9b3e3f5 100644 --- a/target/linux/brcm2708/patches-4.9/032-v4.11-0001-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch +++ b/target/linux/brcm2708/patches-4.9/032-v4.11-0001-ARM-dts-bcm283x-Add-VEC-node-in-bcm283x.dtsi.patch @@ -13,7 +13,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -476,6 +476,14 @@ +@@ -481,6 +481,14 @@ status = "disabled"; }; diff --git a/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch b/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch index a5737e3c83..8916e52741 100644 --- a/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch +++ b/target/linux/brcm2708/patches-4.9/950-0001-smsx95xx-fix-crimes-against-truesize.patch @@ -25,7 +25,7 @@ Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -1951,7 +1955,8 @@ static int smsc95xx_rx_fixup(struct usbn +@@ -1954,7 +1958,8 @@ static int smsc95xx_rx_fixup(struct usbn if (dev->net->features & NETIF_F_RXCSUM) smsc95xx_rx_csum_offload(skb); skb_trim(skb, skb->len - 4); /* remove fcs */ @@ -35,7 +35,7 @@ Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> return 1; } -@@ -1969,7 +1974,8 @@ static int smsc95xx_rx_fixup(struct usbn +@@ -1972,7 +1977,8 @@ static int smsc95xx_rx_fixup(struct usbn if (dev->net->features & NETIF_F_RXCSUM) smsc95xx_rx_csum_offload(ax_skb); skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ diff --git a/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch b/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch index fc7ac4d8b9..763b5c7375 100644 --- a/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch +++ b/target/linux/brcm2708/patches-4.9/950-0002-smsc95xx-Experimental-Enable-turbo_mode-and-packetsi.patch @@ -22,7 +22,7 @@ See: http://forum.kodi.tv/showthread.php?tid=285288 static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -1106,13 +1110,13 @@ static int smsc95xx_reset(struct usbnet +@@ -1109,13 +1113,13 @@ static int smsc95xx_reset(struct usbnet if (!turbo_mode) { burst_cap = 0; diff --git a/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch b/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch index 8075dff2f3..fdf5fc86d7 100644 --- a/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch +++ b/target/linux/brcm2708/patches-4.9/950-0003-Allow-mac-address-to-be-set-in-smsc95xx.patch @@ -29,7 +29,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com> static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index, u32 *data, int in_pm) { -@@ -918,6 +923,53 @@ static int smsc95xx_ioctl(struct net_dev +@@ -921,6 +926,53 @@ static int smsc95xx_ioctl(struct net_dev return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); } @@ -83,7 +83,7 @@ Signed-off-by: popcornmix <popcornmix@gmail.com> static void smsc95xx_init_mac_address(struct usbnet *dev) { const u8 *mac_addr; -@@ -939,6 +991,10 @@ static void smsc95xx_init_mac_address(st +@@ -942,6 +994,10 @@ static void smsc95xx_init_mac_address(st } } diff --git a/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch b/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch index 6646d77944..0d9b165aba 100644 --- a/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch +++ b/target/linux/brcm2708/patches-4.9/950-0107-i2c-bcm2835-Protect-against-unexpected-TXW-RXR-inter.patch @@ -70,7 +70,7 @@ Reviewed-by: Eric Anholt <eric@anholt.net> } if (val & BCM2835_I2C_S_DONE) { -@@ -137,21 +141,38 @@ static irqreturn_t bcm2835_i2c_isr(int t +@@ -139,21 +143,38 @@ static irqreturn_t bcm2835_i2c_isr(int t i2c_dev->msg_err = BCM2835_I2C_S_LEN; else i2c_dev->msg_err = 0; @@ -111,7 +111,7 @@ Reviewed-by: Eric Anholt <eric@anholt.net> } static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev, -@@ -181,8 +202,9 @@ static int bcm2835_i2c_xfer_msg(struct b +@@ -183,8 +204,9 @@ static int bcm2835_i2c_xfer_msg(struct b time_left = wait_for_completion_timeout(&i2c_dev->completion, BCM2835_I2C_TIMEOUT); diff --git a/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch b/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch index acc2ade0a3..a3c68467be 100644 --- a/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch +++ b/target/linux/brcm2708/patches-4.9/950-0108-i2c-bcm2835-Use-dev_dbg-logging-on-transfer-errors.patch @@ -21,7 +21,7 @@ Reviewed-by: Eric Anholt <eric@anholt.net> --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -216,7 +216,7 @@ static int bcm2835_i2c_xfer_msg(struct b +@@ -218,7 +218,7 @@ static int bcm2835_i2c_xfer_msg(struct b (msg->flags & I2C_M_IGNORE_NAK)) return 0; diff --git a/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch b/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch index a913c50082..65bf08fe8a 100644 --- a/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch +++ b/target/linux/brcm2708/patches-4.9/950-0109-i2c-bcm2835-Can-t-support-I2C_M_IGNORE_NAK.patch @@ -31,7 +31,7 @@ Reviewed-by: Eric Anholt <eric@anholt.net> --- a/drivers/i2c/busses/i2c-bcm2835.c +++ b/drivers/i2c/busses/i2c-bcm2835.c -@@ -212,10 +212,6 @@ static int bcm2835_i2c_xfer_msg(struct b +@@ -214,10 +214,6 @@ static int bcm2835_i2c_xfer_msg(struct b if (likely(!i2c_dev->msg_err)) return 0; diff --git a/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch b/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch index 0cd5aa4693..9ae16e426a 100644 --- a/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch +++ b/target/linux/brcm2708/patches-4.9/950-0110-i2c-bcm2835-Add-support-for-Repeated-Start-Condition.patch @@ -86,7 +86,7 @@ Acked-by: Eric Anholt <eric@anholt.net> * Note about I2C_C_CLEAR on error: * The I2C_C_CLEAR on errors will take some time to resolve -- if you were in * non-idle state and I2C_C_READ, it sets an abort_rx flag and runs through -@@ -151,6 +191,12 @@ static irqreturn_t bcm2835_i2c_isr(int t +@@ -153,6 +193,12 @@ static irqreturn_t bcm2835_i2c_isr(int t } bcm2835_fill_txfifo(i2c_dev); @@ -99,7 +99,7 @@ Acked-by: Eric Anholt <eric@anholt.net> return IRQ_HANDLED; } -@@ -175,30 +221,25 @@ complete: +@@ -177,30 +223,25 @@ complete: return IRQ_HANDLED; } @@ -144,7 +144,7 @@ Acked-by: Eric Anholt <eric@anholt.net> time_left = wait_for_completion_timeout(&i2c_dev->completion, BCM2835_I2C_TIMEOUT); -@@ -209,31 +250,15 @@ static int bcm2835_i2c_xfer_msg(struct b +@@ -211,31 +252,15 @@ static int bcm2835_i2c_xfer_msg(struct b return -ETIMEDOUT; } diff --git a/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch b/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch index 07016d9782..d939c1d6f8 100644 --- a/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch +++ b/target/linux/brcm2708/patches-4.9/950-0111-i2c-bcm2835-Support-i2c-dev-ioctl-I2C_TIMEOUT.patch @@ -26,7 +26,7 @@ Reviewed-by: Eric Anholt <eric@anholt.net> struct bcm2835_i2c_dev { struct device *dev; void __iomem *regs; -@@ -242,7 +240,7 @@ static int bcm2835_i2c_xfer(struct i2c_a +@@ -244,7 +242,7 @@ static int bcm2835_i2c_xfer(struct i2c_a bcm2835_i2c_start_transfer(i2c_dev); time_left = wait_for_completion_timeout(&i2c_dev->completion, diff --git a/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch b/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch index afe2b2297c..d287ae2cb7 100644 --- a/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch +++ b/target/linux/brcm2708/patches-4.9/950-0112-i2c-bcm2835-Add-support-for-dynamic-clock.patch @@ -56,7 +56,7 @@ Reviewed-by: Martin Sperl <kernel@martin.sperl.org> static void bcm2835_fill_txfifo(struct bcm2835_i2c_dev *i2c_dev) { u32 val; -@@ -224,7 +249,7 @@ static int bcm2835_i2c_xfer(struct i2c_a +@@ -226,7 +251,7 @@ static int bcm2835_i2c_xfer(struct i2c_a { struct bcm2835_i2c_dev *i2c_dev = i2c_get_adapdata(adap); unsigned long time_left; @@ -65,7 +65,7 @@ Reviewed-by: Martin Sperl <kernel@martin.sperl.org> for (i = 0; i < (num - 1); i++) if (msgs[i].flags & I2C_M_RD) { -@@ -233,6 +258,10 @@ static int bcm2835_i2c_xfer(struct i2c_a +@@ -235,6 +260,10 @@ static int bcm2835_i2c_xfer(struct i2c_a return -EOPNOTSUPP; } @@ -76,7 +76,7 @@ Reviewed-by: Martin Sperl <kernel@martin.sperl.org> i2c_dev->curr_msg = msgs; i2c_dev->num_msgs = num; reinit_completion(&i2c_dev->completion); -@@ -282,7 +311,6 @@ static int bcm2835_i2c_probe(struct plat +@@ -284,7 +313,6 @@ static int bcm2835_i2c_probe(struct plat { struct bcm2835_i2c_dev *i2c_dev; struct resource *mem, *irq; @@ -84,7 +84,7 @@ Reviewed-by: Martin Sperl <kernel@martin.sperl.org> int ret; struct i2c_adapter *adap; -@@ -306,28 +334,13 @@ static int bcm2835_i2c_probe(struct plat +@@ -308,28 +336,13 @@ static int bcm2835_i2c_probe(struct plat } ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", diff --git a/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch b/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch index f69a48f623..8e31bcc5e7 100644 --- a/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch +++ b/target/linux/brcm2708/patches-4.9/950-0113-i2c-bcm2835-Add-debug-support.patch @@ -151,7 +151,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org> err = val & (BCM2835_I2C_S_CLKT | BCM2835_I2C_S_ERR); if (err) { -@@ -251,6 +335,13 @@ static int bcm2835_i2c_xfer(struct i2c_a +@@ -253,6 +337,13 @@ static int bcm2835_i2c_xfer(struct i2c_a unsigned long time_left; int i, ret; @@ -165,7 +165,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org> for (i = 0; i < (num - 1); i++) if (msgs[i].flags & I2C_M_RD) { dev_warn_once(i2c_dev->dev, -@@ -270,6 +361,10 @@ static int bcm2835_i2c_xfer(struct i2c_a +@@ -272,6 +363,10 @@ static int bcm2835_i2c_xfer(struct i2c_a time_left = wait_for_completion_timeout(&i2c_dev->completion, adap->timeout); @@ -176,7 +176,7 @@ Signed-off-by: Noralf Trønnes <noralf@tronnes.org> if (!time_left) { bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR); -@@ -280,7 +375,9 @@ static int bcm2835_i2c_xfer(struct i2c_a +@@ -282,7 +377,9 @@ static int bcm2835_i2c_xfer(struct i2c_a if (!i2c_dev->msg_err) return num; diff --git a/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch b/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch index 34acd201ba..1d2bd29ab6 100644 --- a/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch +++ b/target/linux/brcm2708/patches-4.9/950-0126-spi-bcm2835-Disable-forced-software-CS.patch @@ -16,7 +16,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -366,6 +366,7 @@ +@@ -371,6 +371,7 @@ #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch b/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch index 00703579e5..285a7b3530 100644 --- a/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch +++ b/target/linux/brcm2708/patches-4.9/950-0160-ARM-bcm2835-dt-Add-the-DSI-module-nodes-and-clocks.patch @@ -28,7 +28,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> +}; --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -93,10 +93,13 @@ +@@ -98,10 +98,13 @@ #clock-cells = <1>; reg = <0x7e101000 0x2000>; @@ -45,7 +45,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> }; rng@7e104000 { -@@ -398,6 +401,26 @@ +@@ -403,6 +406,26 @@ status = "disabled"; }; @@ -72,7 +72,7 @@ Signed-off-by: Eric Anholt <eric@anholt.net> aux: aux@0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; -@@ -457,6 +480,26 @@ +@@ -462,6 +485,26 @@ interrupts = <2 1>; }; |