aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch')
-rw-r--r--target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch405
1 files changed, 0 insertions, 405 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch b/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch
deleted file mode 100644
index 3d09d1dc3f..0000000000
--- a/target/linux/brcm2708/patches-4.9/950-0198-bcm2835-gpio-exp-Driver-for-GPIO-expander-via-mailbo.patch
+++ /dev/null
@@ -1,405 +0,0 @@
-From 2f8f62fbd42a55825da437faba4b6164f2e0bee9 Mon Sep 17 00:00:00 2001
-From: Dave Stevenson <dave.stevenson@raspberrypi.org>
-Date: Mon, 20 Feb 2017 17:01:21 +0000
-Subject: [PATCH] bcm2835-gpio-exp: Driver for GPIO expander via mailbox
- service
-
-Pi3 and Compute Module 3 have a GPIO expander that the
-VPU communicates with.
-There is a mailbox service that now allows control of this
-expander, so add a kernel driver that can make use of it.
-
-Pwr_led node added to device-tree for Pi3.
-
-Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
----
- arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 22 +++
- arch/arm/boot/dts/bcm2710-rpi-cm3.dts | 10 +-
- arch/arm/configs/bcm2709_defconfig | 1 +
- drivers/gpio/Kconfig | 7 +
- drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-bcm-exp.c | 256 +++++++++++++++++++++++++++++
- include/soc/bcm2835/raspberrypi-firmware.h | 4 +
- 7 files changed, 300 insertions(+), 1 deletion(-)
- create mode 100644 drivers/gpio/gpio-bcm-exp.c
-
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-@@ -96,6 +96,14 @@
- firmware = <&firmware>;
- status = "okay";
- };
-+
-+ expgpio: expgpio {
-+ compatible = "brcm,bcm2835-expgpio";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ firmware = <&firmware>;
-+ status = "okay";
-+ };
- };
-
- &fb {
-@@ -163,6 +171,16 @@
- linux,default-trigger = "mmc0";
- gpios = <&virtgpio 0 0>;
- };
-+
-+ pwr_led: pwr {
-+ label = "led1";
-+ linux,default-trigger = "input";
-+ gpios = <&expgpio 7 GPIO_ACTIVE_LOW>;
-+ };
-+};
-+
-+&hdmi {
-+ hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
- };
-
- &audio {
-@@ -193,6 +211,10 @@
- act_led_activelow = <&act_led>,"gpios:8";
- act_led_trigger = <&act_led>,"linux,default-trigger";
-
-+ pwr_led_gpio = <&pwr_led>,"gpios:4";
-+ pwr_led_activelow = <&pwr_led>,"gpios:8";
-+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
-+
- audio = <&audio>,"status";
- watchdog = <&watchdog>,"status";
- random = <&random>,"status";
---- a/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-cm3.dts
-@@ -65,6 +65,14 @@
- firmware = <&firmware>;
- status = "okay";
- };
-+
-+ expgpio: expgpio {
-+ compatible = "brcm,bcm2835-expgpio";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ firmware = <&firmware>;
-+ status = "okay";
-+ };
- };
-
- &fb {
-@@ -123,7 +131,7 @@
- };
-
- &hdmi {
-- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
-+ hpd-gpios = <&expgpio 0 GPIO_ACTIVE_LOW>;
- };
-
- &audio {
---- a/arch/arm/configs/bcm2709_defconfig
-+++ b/arch/arm/configs/bcm2709_defconfig
-@@ -625,6 +625,7 @@ CONFIG_PPS=m
- CONFIG_PPS_CLIENT_LDISC=m
- CONFIG_PPS_CLIENT_GPIO=m
- CONFIG_GPIO_SYSFS=y
-+CONFIG_GPIO_BCM_EXP=y
- CONFIG_GPIO_BCM_VIRT=y
- CONFIG_GPIO_ARIZONA=m
- CONFIG_GPIO_STMPE=y
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -128,6 +128,13 @@ config GPIO_AXP209
- help
- Say yes to enable GPIO support for the AXP209 PMIC
-
-+config GPIO_BCM_EXP
-+ bool "Broadcom Exp GPIO"
-+ depends on OF_GPIO && RASPBERRYPI_FIRMWARE && (ARCH_BCM2835 || COMPILE_TEST)
-+ help
-+ Turn on GPIO support for Broadcom chips using the firmware mailbox
-+ to communicate with VideoCore on BCM283x chips.
-+
- config GPIO_BCM_KONA
- bool "Broadcom Kona GPIO"
- depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizo
- obj-$(CONFIG_GPIO_ATH79) += gpio-ath79.o
- obj-$(CONFIG_GPIO_ASPEED) += gpio-aspeed.o
- obj-$(CONFIG_GPIO_AXP209) += gpio-axp209.o
-+obj-$(CONFIG_GPIO_BCM_EXP) += gpio-bcm-exp.o
- obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o
- obj-$(CONFIG_GPIO_BCM_VIRT) += gpio-bcm-virt.o
- obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
---- /dev/null
-+++ b/drivers/gpio/gpio-bcm-exp.c
-@@ -0,0 +1,256 @@
-+/*
-+ * Broadcom expander GPIO driver
-+ *
-+ * Uses the firmware mailbox service to communicate with the
-+ * GPIO expander on the VPU.
-+ *
-+ * Copyright (C) 2017 Raspberry Pi Trading Ltd.
-+ *
-+ * Author: Dave Stevenson <dave.stevenson@raspberrypi.org>
-+ * Based on gpio-bcm-virt.c by Dom Cobley <popcornmix@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/gpio.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <soc/bcm2835/raspberrypi-firmware.h>
-+
-+#define MODULE_NAME "brcmexp-gpio"
-+#define NUM_GPIO 8
-+
-+struct brcmexp_gpio {
-+ struct gpio_chip gc;
-+ struct device *dev;
-+ struct rpi_firmware *fw;
-+};
-+
-+struct gpio_set_config {
-+ u32 gpio, direction, polarity, term_en, term_pull_up, state;
-+};
-+
-+struct gpio_get_config {
-+ u32 gpio, direction, polarity, term_en, term_pull_up;
-+};
-+
-+struct gpio_get_set_state {
-+ u32 gpio, state;
-+};
-+
-+static int brcmexp_gpio_get_polarity(struct gpio_chip *gc, unsigned int off)
-+{
-+ struct brcmexp_gpio *gpio;
-+ struct gpio_get_config get;
-+ int ret;
-+
-+ gpio = container_of(gc, struct brcmexp_gpio, gc);
-+
-+ get.gpio = off + gpio->gc.base; /* GPIO to update */
-+
-+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG,
-+ &get, sizeof(get));
-+ if (ret) {
-+ dev_err(gpio->dev,
-+ "Failed to get GPIO %u config (%d)\n", off, ret);
-+ return ret;
-+ }
-+ return get.polarity;
-+}
-+
-+static int brcmexp_gpio_dir_in(struct gpio_chip *gc, unsigned int off)
-+{
-+ struct brcmexp_gpio *gpio;
-+ struct gpio_set_config set_in;
-+ int ret;
-+
-+ gpio = container_of(gc, struct brcmexp_gpio, gc);
-+
-+ set_in.gpio = off + gpio->gc.base; /* GPIO to update */
-+ set_in.direction = 0; /* Input */
-+ set_in.polarity = brcmexp_gpio_get_polarity(gc, off);
-+ /* Retain existing setting */
-+ set_in.term_en = 0; /* termination disabled */
-+ set_in.term_pull_up = 0; /* n/a as termination disabled */
-+ set_in.state = 0; /* n/a as configured as an input */
-+
-+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG,
-+ &set_in, sizeof(set_in));
-+ if (ret) {
-+ dev_err(gpio->dev,
-+ "Failed to set GPIO %u to input (%d)\n",
-+ off, ret);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static int brcmexp_gpio_dir_out(struct gpio_chip *gc, unsigned int off, int val)
-+{
-+ struct brcmexp_gpio *gpio;
-+ struct gpio_set_config set_out;
-+ int ret;
-+
-+ gpio = container_of(gc, struct brcmexp_gpio, gc);
-+
-+ set_out.gpio = off + gpio->gc.base; /* GPIO to update */
-+ set_out.direction = 1; /* Output */
-+ set_out.polarity = brcmexp_gpio_get_polarity(gc, off);
-+ /* Retain existing setting */
-+ set_out.term_en = 0; /* n/a as an output */
-+ set_out.term_pull_up = 0; /* n/a as termination disabled */
-+ set_out.state = val; /* Output state */
-+
-+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_CONFIG,
-+ &set_out, sizeof(set_out));
-+ if (ret) {
-+ dev_err(gpio->dev,
-+ "Failed to set GPIO %u to output (%d)\n", off, ret);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static int brcmexp_gpio_get_direction(struct gpio_chip *gc, unsigned int off)
-+{
-+ struct brcmexp_gpio *gpio;
-+ struct gpio_get_config get;
-+ int ret;
-+
-+ gpio = container_of(gc, struct brcmexp_gpio, gc);
-+
-+ get.gpio = off + gpio->gc.base; /* GPIO to update */
-+
-+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_CONFIG,
-+ &get, sizeof(get));
-+ if (ret) {
-+ dev_err(gpio->dev,
-+ "Failed to get GPIO %u config (%d)\n", off, ret);
-+ return ret;
-+ }
-+ return get.direction ? GPIOF_DIR_OUT : GPIOF_DIR_IN;
-+}
-+
-+static int brcmexp_gpio_get(struct gpio_chip *gc, unsigned int off)
-+{
-+ struct brcmexp_gpio *gpio;
-+ struct gpio_get_set_state get;
-+ int ret;
-+
-+ gpio = container_of(gc, struct brcmexp_gpio, gc);
-+
-+ get.gpio = off + gpio->gc.base; /* GPIO to update */
-+ get.state = 0; /* storage for returned value */
-+
-+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_GET_GPIO_STATE,
-+ &get, sizeof(get));
-+ if (ret) {
-+ dev_err(gpio->dev,
-+ "Failed to get GPIO %u state (%d)\n", off, ret);
-+ return ret;
-+ }
-+ return !!get.state;
-+}
-+
-+static void brcmexp_gpio_set(struct gpio_chip *gc, unsigned int off, int val)
-+{
-+ struct brcmexp_gpio *gpio;
-+ struct gpio_get_set_state set;
-+ int ret;
-+
-+ gpio = container_of(gc, struct brcmexp_gpio, gc);
-+
-+ off += gpio->gc.base;
-+
-+ set.gpio = off + gpio->gc.base; /* GPIO to update */
-+ set.state = val; /* Output state */
-+
-+ ret = rpi_firmware_property(gpio->fw, RPI_FIRMWARE_SET_GPIO_STATE,
-+ &set, sizeof(set));
-+ if (ret)
-+ dev_err(gpio->dev,
-+ "Failed to set GPIO %u state (%d)\n", off, ret);
-+}
-+
-+static int brcmexp_gpio_probe(struct platform_device *pdev)
-+{
-+ int err = 0;
-+ struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+ struct device_node *fw_node;
-+ struct rpi_firmware *fw;
-+ struct brcmexp_gpio *ucb;
-+
-+ fw_node = of_parse_phandle(np, "firmware", 0);
-+ if (!fw_node) {
-+ dev_err(dev, "Missing firmware node\n");
-+ return -ENOENT;
-+ }
-+
-+ fw = rpi_firmware_get(fw_node);
-+ if (!fw)
-+ return -EPROBE_DEFER;
-+
-+ ucb = devm_kzalloc(dev, sizeof(*ucb), GFP_KERNEL);
-+ if (!ucb)
-+ return -EINVAL;
-+
-+ ucb->fw = fw;
-+ ucb->dev = dev;
-+ ucb->gc.label = MODULE_NAME;
-+ ucb->gc.owner = THIS_MODULE;
-+ ucb->gc.of_node = np;
-+ ucb->gc.base = 128;
-+ ucb->gc.ngpio = NUM_GPIO;
-+
-+ ucb->gc.direction_input = brcmexp_gpio_dir_in;
-+ ucb->gc.direction_output = brcmexp_gpio_dir_out;
-+ ucb->gc.get_direction = brcmexp_gpio_get_direction;
-+ ucb->gc.get = brcmexp_gpio_get;
-+ ucb->gc.set = brcmexp_gpio_set;
-+ ucb->gc.can_sleep = true;
-+
-+ err = gpiochip_add(&ucb->gc);
-+ if (err)
-+ return err;
-+
-+ platform_set_drvdata(pdev, ucb);
-+
-+ return 0;
-+}
-+
-+static int brcmexp_gpio_remove(struct platform_device *pdev)
-+{
-+ struct brcmexp_gpio *ucb = platform_get_drvdata(pdev);
-+
-+ gpiochip_remove(&ucb->gc);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id __maybe_unused brcmexp_gpio_ids[] = {
-+ { .compatible = "brcm,bcm2835-expgpio" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, brcmexp_gpio_ids);
-+
-+static struct platform_driver brcmexp_gpio_driver = {
-+ .driver = {
-+ .name = MODULE_NAME,
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(brcmexp_gpio_ids),
-+ },
-+ .probe = brcmexp_gpio_probe,
-+ .remove = brcmexp_gpio_remove,
-+};
-+module_platform_driver(brcmexp_gpio_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.org>");
-+MODULE_DESCRIPTION("brcm-exp GPIO driver");
-+MODULE_ALIAS("platform:brcmexp-gpio");
---- a/include/soc/bcm2835/raspberrypi-firmware.h
-+++ b/include/soc/bcm2835/raspberrypi-firmware.h
-@@ -83,7 +83,11 @@ enum rpi_firmware_property_tag {
- RPI_FIRMWARE_SET_TURBO = 0x00038009,
- RPI_FIRMWARE_SET_CUSTOMER_OTP = 0x00038021,
- RPI_FIRMWARE_SET_DOMAIN_STATE = 0x00038030,
-+ RPI_FIRMWARE_GET_GPIO_STATE = 0x00030041,
-+ RPI_FIRMWARE_SET_GPIO_STATE = 0x00038041,
- RPI_FIRMWARE_SET_SDHOST_CLOCK = 0x00038042,
-+ RPI_FIRMWARE_GET_GPIO_CONFIG = 0x00030043,
-+ RPI_FIRMWARE_SET_GPIO_CONFIG = 0x00038043,
-
- /* Dispmanx TAGS */
- RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001,