1 files changed, 0 insertions, 138 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch b/target/linux/brcm2708/patches-4.9/950-0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch
deleted file mode 100644
index 3d65f5e269..0000000000
--- a/target/linux/brcm2708/patches-4.9/950-0161-BCM270X-Enable-the-DSI-panel-node-in-the-VC4-overlay.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From 2c62d430b6b3c20867e55465e0557a1543088f09 Mon Sep 17 00:00:00 2001
-From: Eric Anholt <eric@anholt.net>
-Date: Thu, 2 Jun 2016 15:09:35 -0700
-Subject: [PATCH] BCM270X: Enable the DSI panel node in the VC4 overlay.
-
-Signed-off-by: Eric Anholt <eric@anholt.net>
----
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts           |  5 ++++
- arch/arm/boot/dts/bcm2708-rpi-b.dts                |  5 ++++
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts              |  5 ++++
- arch/arm/boot/dts/bcm270x.dtsi                     | 27 ++++++++++++++++++++++
- arch/arm/boot/dts/bcm2710-rpi-3-b.dts              |  5 ++++
- arch/arm/boot/dts/bcm2710.dtsi                     |  1 -
- arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts | 22 ++++++++++++++++++
- 7 files changed, 69 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -154,3 +154,8 @@
- 		sd_debug     = <&sdhost>,"brcm,debug";
- 	};
- };
-+
-+&i2c_dsi {
-+	gpios = <&gpio 28 0
-+		 &gpio 29 0>;
-+};
---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -144,3 +144,8 @@
- 		sd_debug     = <&sdhost>,"brcm,debug";
- 	};
- };
-+
-+&i2c_dsi {
-+	gpios = <&gpio 2 0
-+		 &gpio 3 0>;
-+};
---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-@@ -154,3 +154,8 @@
- 		sd_debug     = <&sdhost>,"brcm,debug";
- 	};
- };
-+
-+&i2c_dsi {
-+	gpios = <&gpio 28 0
-+		 &gpio 29 0>;
-+};
---- a/arch/arm/boot/dts/bcm270x.dtsi
-+++ b/arch/arm/boot/dts/bcm270x.dtsi
-@@ -137,6 +137,29 @@
- 			/* Add alias */
- 			status = "disabled";
- 		};
-+
-+		i2c_dsi: i2cdsi {
-+			/* We have to use i2c-gpio because the
-+			 * firmware is also polling another device
-+			 * using the only hardware I2C bus that could
-+			 * connect to these pins.
-+			 */
-+			compatible = "i2c-gpio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "disabled";
-+
-+			pitouchscreen_bridge: bridge@45 {
-+				compatible = "raspberrypi,touchscreen-bridge-i2c";
-+				reg = <0x45>;
-+			};
-+
-+			pitouchscreen_touch: bridge@38 {
-+				compatible = "raspberrypi,touchscreen-ts-i2c";
-+				reg = <0x38>;
-+			};
-+		};
-+
- 	};
- 
- 	vdd_5v0_reg: fixedregulator_5v0 {
-@@ -155,3 +178,7 @@
- 		regulator-always-on;
- 	};
- };
-+
-+&dsi1 {
-+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+};
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-@@ -201,3 +201,8 @@
- 		sd_debug     = <&sdhost>,"brcm,debug";
- 	};
- };
-+
-+&i2c_dsi {
-+	gpios = <&gpio 44 0
-+		 &gpio 45 0>;
-+};
---- a/arch/arm/boot/dts/bcm2710.dtsi
-+++ b/arch/arm/boot/dts/bcm2710.dtsi
-@@ -145,4 +145,3 @@
- 	interrupt-parent = <&local_intc>;
- 	interrupts = <8>;
- };
--
---- a/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-+++ b/arch/arm/boot/dts/overlays/vc4-kms-v3d-overlay.dts
-@@ -126,6 +126,28 @@
- 		};
- 	};
- 
-+	fragment@16 {
-+		target = <&dsi1>;
-+		__overlay__  {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			status = "okay";
-+
-+			pitouchscreen: panel@0 {
-+				compatible = "raspberrypi,touchscreen";
-+				reg = <0>;
-+				raspberrypi,touchscreen-bridge = <&pitouchscreen_bridge>;
-+			};
-+		};
-+	};
-+
-+	fragment@17 {
-+		target = <&i2c_dsi>;
-+		__overlay__  {
-+			status = "okay";
-+		};
-+	};
-+
- 	__overrides__ {
- 		cma-256 = <0>,"+0-1-2-3-4";
- 		cma-192 = <0>,"-0+1-2-3-4";