diff options
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch')
| -rw-r--r-- | target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch | 60858 |
1 files changed, 0 insertions, 60858 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch deleted file mode 100644 index 707e1a34a1..0000000000 --- a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch +++ /dev/null @@ -1,60858 +0,0 @@ -From 65f57e56fcf9d40383718f0bcd9e6f95a34ca1aa Mon Sep 17 00:00:00 2001 -From: popcornmix <popcornmix@gmail.com> -Date: Wed, 1 May 2013 19:46:17 +0100 -Subject: [PATCH] Add dwc_otg driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: popcornmix <popcornmix@gmail.com> - -usb: dwc: fix lockdep false positive - -Signed-off-by: Kari Suvanto <karis79@gmail.com> - -usb: dwc: fix inconsistent lock state - -Signed-off-by: Kari Suvanto <karis79@gmail.com> - -Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance. -Thanks to Gordon and Costas - -Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005. - -Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh - -Make sure we wait for the reset to finish - -dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel - memory corruption, escalating to OOPS under high USB load. - -dwc_otg: Fix unsafe access of QTD during URB enqueue - -In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the -transaction could complete almost immediately after the qtd was assigned -to a host channel during URB enqueue, which meant the qtd pointer was no -longer valid having been completed and removed. Usually, this resulted in -an OOPS during URB submission. By predetermining whether transactions -need to be queued or not, this unsafe pointer access is avoided. - -This bug was only evident on the Pi model A where a device was attached -that had no periodic endpoints (e.g. USB pendrive or some wlan devices). - -dwc_otg: Fix incorrect URB allocation error handling - -If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS -because for some reason a member of the *unallocated* struct was set to -zero. Error handling changed to fail correctly. - -dwc_otg: fix potential use-after-free case in interrupt handler - -If a transaction had previously aborted, certain interrupts are -enabled to track error counts and reset where necessary. On IN -endpoints the host generates an ACK interrupt near-simultaneously -with completion of transfer. In the case where this transfer had -previously had an error, this results in a use-after-free on -the QTD memory space with a 1-byte length being overwritten to -0x00. - -dwc_otg: add handling of SPLIT transaction data toggle errors - -Previously a data toggle error on packets from a USB1.1 device behind -a TT would result in the Pi locking up as the driver never handled -the associated interrupt. Patch adds basic retry mechanism and -interrupt acknowledgement to cater for either a chance toggle error or -for devices that have a broken initial toggle state (FT8U232/FT232BM). - -dwc_otg: implement tasklet for returning URBs to usbcore hcd layer - -The dwc_otg driver interrupt handler for transfer completion will spend -a very long time with interrupts disabled when a URB is completed - -this is because usb_hcd_giveback_urb is called from within the handler -which for a USB device driver with complicated processing (e.g. webcam) -will take an exorbitant amount of time to complete. This results in -missed completion interrupts for other USB packets which lead to them -being dropped due to microframe overruns. - -This patch splits returning the URB to the usb hcd layer into a -high-priority tasklet. This will have most benefit for isochronous IN -transfers but will also have incidental benefit where multiple periodic -devices are active at once. - -dwc_otg: fix NAK holdoff and allow on split transactions only - -This corrects a bug where if a single active non-periodic endpoint -had at least one transaction in its qh, on frnum == MAX_FRNUM the qh -would get skipped and never get queued again. This would result in -a silent device until error detection (automatic or otherwise) would -either reset the device or flush and requeue the URBs. - -Additionally the NAK holdoff was enabled for all transactions - this -would potentially stall a HS endpoint for 1ms if a previous error state -enabled this interrupt and the next response was a NAK. Fix so that -only split transactions get held off. - -dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler - -usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it -asynchronously in the tasklet was not safe (regression in -c4564d4a1a0a9b10d4419e48239f5d99e88d2667). - -This change unlinks it from the endpoint prior to queueing it for handling in -the tasklet, and also adds a check to ensure the urb is OK to be unlinked -before doing so. - -NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb -when a USB device was unplugged/replugged during data transfer. This effect -was reproduced using automated USB port power control, hundreds of replug -events were performed during active transfers to confirm that the problem was -eliminated. - -USB fix using a FIQ to implement split transactions - -This commit adds a FIQ implementaion that schedules -the split transactions using a FIQ so we don't get -held off by the interrupt latency of Linux - -dwc_otg: fix device attributes and avoid kernel warnings on boot - -dcw_otg: avoid logging function that can cause panics - -See: https://github.com/raspberrypi/firmware/issues/21 -Thanks to cleverca22 for fix - -dwc_otg: mask correct interrupts after transaction error recovery - -The dwc_otg driver will unmask certain interrupts on a transaction -that previously halted in the error state in order to reset the -QTD error count. The various fine-grained interrupt handlers do not -consider that other interrupts besides themselves were unmasked. - -By disabling the two other interrupts only ever enabled in DMA mode -for this purpose, we can avoid unnecessary function calls in the -IRQ handler. This will also prevent an unneccesary FIQ interrupt -from being generated if the FIQ is enabled. - -dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ - -In the case of a transaction to a device that had previously aborted -due to an error, several interrupts are enabled to reset the error -count when a device responds. This has the side-effect of making the -FIQ thrash because the hardware will generate multiple instances of -a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK -on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the -associated interrupts. - -Additionally, on non-split transactions make sure that only unmasked -interrupts are cleared. This caused a hard-to-trigger but serious -race condition when you had the combination of an endpoint awaiting -error recovery and a transaction completed on an endpoint - due to -the sequencing and timing of interrupts generated by the dwc_otg core, -it was possible to confuse the IRQ handler. - -Fix function tracing - -dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue - -dwc_otg: prevent OOPSes during device disconnects - -The dwc_otg_urb_enqueue function is thread-unsafe. In particular the -access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and -friends does not occur within a critical section and so if a device -was unplugged during activity there was a high chance that the -usbcore hub_thread would try to disable the endpoint with partially- -formed entries in the URB queue. This would result in BUG() or null -pointer dereferences. - -Fix so that access of urb->hcpriv, enqueuing to the hardware and -adding to usbcore endpoint URB lists is contained within a single -critical section. - -dwc_otg: prevent BUG() in TT allocation if hub address is > 16 - -A fixed-size array is used to track TT allocation. This was -previously set to 16 which caused a crash because -dwc_otg_hcd_allocate_port would read past the end of the array. - -This was hit if a hub was plugged in which enumerated as addr > 16, -due to previous device resets or unplugs. - -Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows -to a large size if 128 hub addresses are supported. This field is -for debug only for tracking which frame an allocate happened in. - -dwc_otg: make channel halts with unknown state less damaging - -If the IRQ received a channel halt interrupt through the FIQ -with no other bits set, the IRQ would not release the host -channel and never complete the URB. - -Add catchall handling to treat as a transaction error and retry. - -dwc_otg: fiq_split: use TTs with more granularity - -This fixes certain issues with split transaction scheduling. - -- Isochronous multi-packet OUT transactions now hog the TT until - they are completed - this prevents hubs aborting transactions - if they get a periodic start-split out-of-order -- Don't perform TT allocation on non-periodic endpoints - this - allows simultaneous use of the TT's bulk/control and periodic - transaction buffers - -This commit will mainly affect USB audio playback. - -dwc_otg: fix potential sleep while atomic during urb enqueue - -Fixes a regression introduced with eb1b482a. Kmalloc called from -dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have -the GPF_ATOMIC flag set. Force this flag when inside the larger -critical section. - -dwc_otg: make fiq_split_enable imply fiq_fix_enable - -Failing to set up the FIQ correctly would result in -"IRQ 32: nobody cared" errors in dmesg. - -dwc_otg: prevent crashes on host port disconnects - -Fix several issues resulting in crashes or inconsistent state -if a Model A root port was disconnected. - -- Clean up queue heads properly in kill_urbs_in_qh_list by - removing the empty QHs from the schedule lists -- Set the halt status properly to prevent IRQ handlers from - using freed memory -- Add fiq_split related cleanup for saved registers -- Make microframe scheduling reclaim host channels if - active during a disconnect -- Abort URBs with -ESHUTDOWN status response, informing - device drivers so they respond in a more correct fashion - and don't try to resubmit URBs -- Prevent IRQ handlers from attempting to handle channel - interrupts if the associated URB was dequeued (and the - driver state was cleared) - -dwc_otg: prevent leaking URBs during enqueue - -A dwc_otg_urb would get leaked if the HCD enqueue function -failed for any reason. Free the URB at the appropriate points. - -dwc_otg: Enable NAK holdoff for control split transactions - -Certain low-speed devices take a very long time to complete a -data or status stage of a control transaction, producing NAK -responses until they complete internal processing - the USB2.0 -spec limit is up to 500mS. This causes the same type of interrupt -storm as seen with USB-serial dongles prior to c8edb238. - -In certain circumstances, usually while booting, this interrupt -storm could cause SD card timeouts. - -dwc_otg: Fix for occasional lockup on boot when doing a USB reset - -dwc_otg: Don't issue traffic to LS devices in FS mode - -Issuing low-speed packets when the root port is in full-speed mode -causes the root port to stop responding. Explicitly fail when -enqueuing URBs to a LS endpoint on a FS bus. - -Fix ARM architecture issue with local_irq_restore() - -If local_fiq_enable() is called before a local_irq_restore(flags) where -the flags variable has the F bit set, the FIQ will be erroneously disabled. - -Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR. - -Also fix some of the hacks previously implemented for previous dwc_otg -incarnations. - -dwc_otg: fiq_fsm: Base commit for driver rewrite - -This commit removes the previous FIQ fixes entirely and adds fiq_fsm. - -This rewrite features much more complete support for split transactions -and takes into account several OTG hardware bugs. High-speed -isochronous transactions are also capable of being performed by fiq_fsm. - -All driver options have been removed and replaced with: - - dwc_otg.fiq_enable (bool) - - dwc_otg.fiq_fsm_enable (bool) - - dwc_otg.fiq_fsm_mask (bitmask) - - dwc_otg.nak_holdoff (unsigned int) - -Defaults are specified such that fiq_fsm behaves similarly to the -previously implemented FIQ fixes. - -fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used - -If the transfer associated with a QTD failed due to a bus error, the HCD -would retry the transfer up to 3 times (implementing the USB2.0 -three-strikes retry in software). - -Due to the masking mechanism used by fiq_fsm, it is only possible to pass -a single interrupt through to the HCD per-transfer. - -In this instance host channels would fall off the radar because the error -reset would function, but the subsequent channel halt would be lost. - -Push the error count reset into the FIQ handler. - -fiq_fsm: Implement timeout mechanism - -For full-speed endpoints with a large packet size, interrupt latency -runs the risk of the FIQ starting a transaction too late in a full-speed -frame. If the device is still transmitting data when EOF2 for the -downstream frame occurs, the hub will disable the port. This change is -not reflected in the hub status endpoint and the device becomes -unresponsive. - -Prevent high-bandwidth transactions from being started too late in a -frame. The mechanism is not guaranteed: a combination of bit stuffing -and hub latency may still result in a device overrunning. - -fiq_fsm: fix bounce buffer utilisation for Isochronous OUT - -Multi-packet isochronous OUT transactions were subject to a few bounday -bugs. Fix them. - -Audio playback is now much more robust: however, an issue stands with -devices that have adaptive sinks - ALSA plays samples too fast. - -dwc_otg: Return full-speed frame numbers in HS mode - -The frame counter increments on every *microframe* in high-speed mode. -Most device drivers expect this number to be in full-speed frames - this -caused considerable confusion to e.g. snd_usb_audio which uses the -frame counter to estimate the number of samples played. - -fiq_fsm: save PID on completion of interrupt OUT transfers - -Also add edge case handling for interrupt transports. - -Note that for periodic split IN, data toggles are unimplemented in the -OTG host hardware - it unconditionally accepts any PID. - -fiq_fsm: add missing case for fiq_fsm_tt_in_use() - -Certain combinations of bitrate and endpoint activity could -result in a periodic transaction erroneously getting started -while the previous Isochronous OUT was still active. - -fiq_fsm: clear hcintmsk for aborted transactions - -Prevents the FIQ from erroneously handling interrupts -on a timed out channel. - -fiq_fsm: enable by default - -fiq_fsm: fix dequeues for non-periodic split transactions - -If a dequeue happened between the SSPLIT and CSPLIT phases of the -transaction, the HCD would never receive an interrupt. - -fiq_fsm: Disable by default - -fiq_fsm: Handle HC babble errors - -The HCTSIZ transfer size field raises a babble interrupt if -the counter wraps. Handle the resulting interrupt in this case. - -dwc_otg: fix interrupt registration for fiq_enable=0 - -Additionally make the module parameter conditional for wherever -hcd->fiq_state is touched. - -fiq_fsm: Enable by default - -dwc_otg: Fix various issues with root port and transaction errors - -Process the host port interrupts correctly (and don't trample them). -Root port hotplug now functional again. - -Fix a few thinkos with the transaction error passthrough for fiq_fsm. - -fiq_fsm: Implement hack for Split Interrupt transactions - -Hubs aren't too picky about which endpoint we send Control type split -transactions to. By treating Interrupt transfers as Control, it is -possible to use the non-periodic queue in the OTG core as well as the -non-periodic FIFOs in the hub itself. This massively reduces the -microframe exclusivity/contention that periodic split transactions -otherwise have to enforce. - -It goes without saying that this is a fairly egregious USB specification -violation, but it works. - -Original idea by Hans Petter Selasky @ FreeBSD.org. - -dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only. - -dwc_otg: introduce fiq_fsm_spin(un|)lock() - -SMP safety for the FIQ relies on register read-modify write cycles being -completed in the correct order. Several places in the DWC code modify -registers also touched by the FIQ. Protect these by a bare-bones lock -mechanism. - -This also makes it possible to run the FIQ and IRQ handlers on different -cores. - -fiq_fsm: fix build on bcm2708 and bcm2709 platforms - -dwc_otg: put some barriers back where they should be for UP - -bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active - -dwc_otg: fixup read-modify-write in critical paths - -Be more careful about read-modify-write on registers that the FIQ -also touches. - -Guard fiq_fsm_spin_lock with fiq_enable check - -fiq_fsm: Falling out of the state machine isn't fatal - -This edge case can be hit if the port is disabled while the FIQ is -in the middle of a transaction. Make the effects less severe. - -Also get rid of the useless return value. - -squash: dwc_otg: Allow to build without SMP - -usb: core: make overcurrent messages more prominent - -Hub overcurrent messages are more serious than "debug". Increase loglevel. - -usb: dwc_otg: Don't use dma_to_virt() - -Commit 6ce0d20 changes dma_to_virt() which breaks this driver. -Open code the old dma_to_virt() implementation to work around this. - -Limit the use of __bus_to_virt() to cases where transfer_buffer_length -is set and transfer_buffer is not set. This is done to increase the -chance that this driver will also work on ARCH_BCM2835. - -transfer_buffer should not be NULL if the length is set, but the -comment in the code indicates that there are situations where this -might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar -comment pointing to a possible: 'usb storage / SCSI bug'. - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> - -dwc_otg: Fix crash when fiq_enable=0 - -dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly - -Certain low-bandwidth high-speed USB devices (specialist audio devices, -compressed-frame webcams) have packet intervals > 1 microframe. - -Stride these transfers in the FIQ by using the start-of-frame interrupt -to restart the channel at the right time. - -dwc_otg: Force host mode to fix incorrect compute module boards - -dwc_otg: Add ARCH_BCM2835 support - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> - -dwc_otg: Simplify FIQ irq number code - -Dropping ATAGS means we can simplify the FIQ irq number code. -Also add error checking on the returned irq number. - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> - -dwc_otg: Remove duplicate gadget probe/unregister function - -dwc_otg: Properly set the HFIR - -Douglas Anderson reported: - -According to the most up to date version of the dwc2 databook, the FRINT -field of the HFIR register should be programmed to: -* 125 us * (PHY clock freq for HS) - 1 -* 1000 us * (PHY clock freq for FS/LS) - 1 - -This is opposed to older versions of the doc that claimed it should be: -* 125 us * (PHY clock freq for HS) -* 1000 us * (PHY clock freq for FS/LS) - -and reported lower timing jitter on a USB analyser - -dcw_otg: trim xfer length when buffer larger than allocated size is received - -dwc_otg: Don't free qh align buffers in atomic context - -dwc_otg: Enable the hack for Split Interrupt transactions by default - -dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues. -So far we are aware of many success stories but no failure caused by this setting. -Make it a default to learn more. - -See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437 - -Signed-off-by: popcornmix <popcornmix@gmail.com> - -dwc_otg: Use kzalloc when suitable - -dwc_otg: Pass struct device to dma_alloc*() - -This makes it possible to get the bus address from Device Tree. - -Signed-off-by: Noralf Trønnes <noralf@tronnes.org> ---- - arch/arm/include/asm/irqflags.h | 16 +- - arch/arm/kernel/fiqasm.S | 4 + - drivers/usb/Makefile | 1 + - drivers/usb/core/generic.c | 1 + - drivers/usb/core/hub.c | 2 +- - drivers/usb/core/message.c | 79 + - drivers/usb/core/otg_whitelist.h | 114 +- - drivers/usb/gadget/file_storage.c | 3676 ++++++++++ - drivers/usb/host/Kconfig | 13 + - drivers/usb/host/Makefile | 2 + - drivers/usb/host/dwc_common_port/Makefile | 58 + - drivers/usb/host/dwc_common_port/Makefile.fbsd | 17 + - drivers/usb/host/dwc_common_port/Makefile.linux | 49 + - drivers/usb/host/dwc_common_port/changes.txt | 174 + - drivers/usb/host/dwc_common_port/doc/doxygen.cfg | 270 + - drivers/usb/host/dwc_common_port/dwc_cc.c | 532 ++ - drivers/usb/host/dwc_common_port/dwc_cc.h | 224 + - drivers/usb/host/dwc_common_port/dwc_common_fbsd.c | 1308 ++++ - .../usb/host/dwc_common_port/dwc_common_linux.c | 1418 ++++ - drivers/usb/host/dwc_common_port/dwc_common_nbsd.c | 1275 ++++ - drivers/usb/host/dwc_common_port/dwc_crypto.c | 308 + - drivers/usb/host/dwc_common_port/dwc_crypto.h | 111 + - drivers/usb/host/dwc_common_port/dwc_dh.c | 291 + - drivers/usb/host/dwc_common_port/dwc_dh.h | 106 + - drivers/usb/host/dwc_common_port/dwc_list.h | 594 ++ - drivers/usb/host/dwc_common_port/dwc_mem.c | 245 + - drivers/usb/host/dwc_common_port/dwc_modpow.c | 636 ++ - drivers/usb/host/dwc_common_port/dwc_modpow.h | 34 + - drivers/usb/host/dwc_common_port/dwc_notifier.c | 319 + - drivers/usb/host/dwc_common_port/dwc_notifier.h | 122 + - drivers/usb/host/dwc_common_port/dwc_os.h | 1276 ++++ - drivers/usb/host/dwc_common_port/usb.h | 946 +++ - drivers/usb/host/dwc_otg/Makefile | 82 + - drivers/usb/host/dwc_otg/doc/doxygen.cfg | 224 + - drivers/usb/host/dwc_otg/dummy_audio.c | 1574 +++++ - drivers/usb/host/dwc_otg/dwc_cfi_common.h | 142 + - drivers/usb/host/dwc_otg/dwc_otg_adp.c | 854 +++ - drivers/usb/host/dwc_otg/dwc_otg_adp.h | 80 + - drivers/usb/host/dwc_otg/dwc_otg_attr.c | 1210 ++++ - drivers/usb/host/dwc_otg/dwc_otg_attr.h | 89 + - drivers/usb/host/dwc_otg/dwc_otg_cfi.c | 1876 +++++ - drivers/usb/host/dwc_otg/dwc_otg_cfi.h | 320 + - drivers/usb/host/dwc_otg/dwc_otg_cil.c | 7141 ++++++++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_cil.h | 1464 ++++ - drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 1594 +++++ - drivers/usb/host/dwc_otg/dwc_otg_core_if.h | 705 ++ - drivers/usb/host/dwc_otg/dwc_otg_dbg.h | 117 + - drivers/usb/host/dwc_otg/dwc_otg_driver.c | 1757 +++++ - drivers/usb/host/dwc_otg/dwc_otg_driver.h | 86 + - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 1355 ++++ - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 370 + - drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S | 80 + - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4260 ++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd.h | 868 +++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c | 1139 ++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 417 ++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 2727 ++++++++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 1005 +++ - drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 963 +++ - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 188 + - drivers/usb/host/dwc_otg/dwc_otg_pcd.c | 2725 ++++++++ - drivers/usb/host/dwc_otg/dwc_otg_pcd.h | 273 + - drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h | 361 + - drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c | 5148 ++++++++++++++ - drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 1280 ++++ - drivers/usb/host/dwc_otg/dwc_otg_regs.h | 2550 +++++++ - drivers/usb/host/dwc_otg/test/Makefile | 16 + - drivers/usb/host/dwc_otg/test/dwc_otg_test.pm | 337 + - drivers/usb/host/dwc_otg/test/test_mod_param.pl | 133 + - drivers/usb/host/dwc_otg/test/test_sysfs.pl | 193 + - 70 files changed, 59908 insertions(+), 16 deletions(-) - create mode 100644 drivers/usb/gadget/file_storage.c - create mode 100644 drivers/usb/host/dwc_common_port/Makefile - create mode 100644 drivers/usb/host/dwc_common_port/Makefile.fbsd - create mode 100644 drivers/usb/host/dwc_common_port/Makefile.linux - create mode 100644 drivers/usb/host/dwc_common_port/changes.txt - create mode 100644 drivers/usb/host/dwc_common_port/doc/doxygen.cfg - create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_fbsd.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_linux.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_nbsd.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_list.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_mem.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.c - create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.h - create mode 100644 drivers/usb/host/dwc_common_port/dwc_os.h - create mode 100644 drivers/usb/host/dwc_common_port/usb.h - create mode 100644 drivers/usb/host/dwc_otg/Makefile - create mode 100644 drivers/usb/host/dwc_otg/doc/doxygen.cfg - create mode 100644 drivers/usb/host/dwc_otg/dummy_audio.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_cfi_common.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_core_if.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_dbg.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_os_dep.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c - create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_regs.h - create mode 100644 drivers/usb/host/dwc_otg/test/Makefile - create mode 100644 drivers/usb/host/dwc_otg/test/dwc_otg_test.pm - create mode 100644 drivers/usb/host/dwc_otg/test/test_mod_param.pl - create mode 100644 drivers/usb/host/dwc_otg/test/test_sysfs.pl - ---- a/arch/arm/include/asm/irqflags.h -+++ b/arch/arm/include/asm/irqflags.h -@@ -162,13 +162,23 @@ static inline unsigned long arch_local_s - } - - /* -- * restore saved IRQ & FIQ state -+ * restore saved IRQ state - */ - #define arch_local_irq_restore arch_local_irq_restore - static inline void arch_local_irq_restore(unsigned long flags) - { -- asm volatile( -- " msr " IRQMASK_REG_NAME_W ", %0 @ local_irq_restore" -+ unsigned long temp = 0; -+ flags &= ~(1 << 6); -+ asm volatile ( -+ " mrs %0, cpsr" -+ : "=r" (temp) -+ : -+ : "memory", "cc"); -+ /* Preserve FIQ bit */ -+ temp &= (1 << 6); -+ flags = flags | temp; -+ asm volatile ( -+ " msr cpsr_c, %0 @ local_irq_restore" - : - : "r" (flags) - : "memory", "cc"); ---- a/arch/arm/kernel/fiqasm.S -+++ b/arch/arm/kernel/fiqasm.S -@@ -47,3 +47,7 @@ ENTRY(__get_fiq_regs) - mov r0, r0 @ avoid hazard prior to ARMv4 - ret lr - ENDPROC(__get_fiq_regs) -+ -+ENTRY(__FIQ_Branch) -+ mov pc, r8 -+ENDPROC(__FIQ_Branch) ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -7,6 +7,7 @@ - obj-$(CONFIG_USB) += core/ - obj-$(CONFIG_USB_SUPPORT) += phy/ - -+obj-$(CONFIG_USB_DWCOTG) += host/ - obj-$(CONFIG_USB_DWC3) += dwc3/ - obj-$(CONFIG_USB_DWC2) += dwc2/ - obj-$(CONFIG_USB_ISP1760) += isp1760/ ---- a/drivers/usb/core/generic.c -+++ b/drivers/usb/core/generic.c -@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_ - dev_warn(&udev->dev, - "no configuration chosen from %d choice%s\n", - num_configs, plural(num_configs)); -+ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA); - } - return i; - } ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -5074,7 +5074,7 @@ static void port_event(struct usb_hub *h - if (portchange & USB_PORT_STAT_C_OVERCURRENT) { - u16 status = 0, unused; - -- dev_dbg(&port_dev->dev, "over-current change\n"); -+ dev_notice(&port_dev->dev, "over-current change\n"); - usb_clear_port_feature(hdev, port1, - USB_PORT_FEAT_C_OVER_CURRENT); - msleep(100); /* Cool down */ ---- a/drivers/usb/core/message.c -+++ b/drivers/usb/core/message.c -@@ -1923,6 +1923,85 @@ free_interfaces: - if (cp->string == NULL && - !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) - cp->string = usb_cache_string(dev, cp->desc.iConfiguration); -+/* Uncomment this define to enable the HS Electrical Test support */ -+#define DWC_HS_ELECT_TST 1 -+#ifdef DWC_HS_ELECT_TST -+ /* Here we implement the HS Electrical Test support. The -+ * tester uses a vendor ID of 0x1A0A to indicate we should -+ * run a special test sequence. The product ID tells us -+ * which sequence to run. We invoke the test sequence by -+ * sending a non-standard SetFeature command to our root -+ * hub port. Our dwc_otg_hcd_hub_control() routine will -+ * recognize the command and perform the desired test -+ * sequence. -+ */ -+ if (dev->descriptor.idVendor == 0x1A0A) { -+ /* HSOTG Electrical Test */ -+ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n"); -+ -+ if (dev->bus && dev->bus->root_hub) { -+ struct usb_device *hdev = dev->bus->root_hub; -+ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct); -+ -+ switch (dev->descriptor.idProduct) { -+ case 0x0101: /* TEST_SE0_NAK */ -+ dev_warn(&dev->dev, "TEST_SE0_NAK\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ); -+ break; -+ -+ case 0x0102: /* TEST_J */ -+ dev_warn(&dev->dev, "TEST_J\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ); -+ break; -+ -+ case 0x0103: /* TEST_K */ -+ dev_warn(&dev->dev, "TEST_K\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ); -+ break; -+ -+ case 0x0104: /* TEST_PACKET */ -+ dev_warn(&dev->dev, "TEST_PACKET\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ); -+ break; -+ -+ case 0x0105: /* TEST_FORCE_ENABLE */ -+ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ); -+ break; -+ -+ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */ -+ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ); -+ break; -+ -+ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ -+ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ); -+ break; -+ -+ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ -+ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n"); -+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), -+ USB_REQ_SET_FEATURE, USB_RT_PORT, -+ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ); -+ } -+ } -+ } -+#endif /* DWC_HS_ELECT_TST */ - - /* Now that the interfaces are installed, re-enable LPM. */ - usb_unlocked_enable_lpm(dev); ---- a/drivers/usb/core/otg_whitelist.h -+++ b/drivers/usb/core/otg_whitelist.h -@@ -19,33 +19,82 @@ - static struct usb_device_id whitelist_table[] = { - - /* hubs are optional in OTG, but very handy ... */ -+#define CERT_WITHOUT_HUBS -+#if defined(CERT_WITHOUT_HUBS) -+{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/ -+#else - { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), }, - { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), }, -+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), }, -+#endif - - #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */ - /* FIXME actually, printers are NOT supposed to use device classes; - * they're supposed to use interface classes... - */ --{ USB_DEVICE_INFO(7, 1, 1) }, --{ USB_DEVICE_INFO(7, 1, 2) }, --{ USB_DEVICE_INFO(7, 1, 3) }, -+//{ USB_DEVICE_INFO(7, 1, 1) }, -+//{ USB_DEVICE_INFO(7, 1, 2) }, -+//{ USB_DEVICE_INFO(7, 1, 3) }, - #endif - - #ifdef CONFIG_USB_NET_CDCETHER - /* Linux-USB CDC Ethernet gadget */ --{ USB_DEVICE(0x0525, 0xa4a1), }, -+//{ USB_DEVICE(0x0525, 0xa4a1), }, - /* Linux-USB CDC Ethernet + RNDIS gadget */ --{ USB_DEVICE(0x0525, 0xa4a2), }, -+//{ USB_DEVICE(0x0525, 0xa4a2), }, - #endif - - #if IS_ENABLED(CONFIG_USB_TEST) - /* gadget zero, for testing */ --{ USB_DEVICE(0x0525, 0xa4a0), }, -+//{ USB_DEVICE(0x0525, 0xa4a0), }, - #endif - -+/* OPT Tester */ -+{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */ -+{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */ -+{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */ -+{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */ -+{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */ -+{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */ -+{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */ -+{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */ -+ -+/* Sony cameras */ -+{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), }, -+ -+/* Memory Devices */ -+//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */ -+//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */ -+//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */ -+//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */ -+{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/ -+//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */ -+ -+/* HP Printers */ -+//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */ -+//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */ -+ -+/* Speakers */ -+//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */ -+//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */ -+ - { } /* Terminating entry */ - }; - -+static inline void report_errors(struct usb_device *dev) -+{ -+ /* OTG MESSAGE: report errors here, customize to match your product */ -+ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n", -+ le16_to_cpu(dev->descriptor.idVendor), -+ le16_to_cpu(dev->descriptor.idProduct)); -+ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){ -+ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n"); -+ } else { -+ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n"); -+ } -+} -+ -+ - static int is_targeted(struct usb_device *dev) - { - struct usb_device_id *id = whitelist_table; -@@ -95,16 +144,57 @@ static int is_targeted(struct usb_device - continue; - - return 1; -- } -+ /* NOTE: can't use usb_match_id() since interface caches -+ * aren't set up yet. this is cut/paste from that code. -+ */ -+ for (id = whitelist_table; id->match_flags; id++) { -+#ifdef DEBUG -+ dev_dbg(&dev->dev, -+ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n", -+ id->idVendor, -+ id->idProduct, -+ id->bDeviceClass, -+ id->bDeviceSubClass, -+ id->bDeviceProtocol); -+#endif - -- /* add other match criteria here ... */ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && -+ id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && -+ id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) -+ continue; -+ -+ /* No need to test id->bcdDevice_lo != 0, since 0 is never -+ greater than any unsigned number. */ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && -+ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && -+ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && -+ (id->bDeviceClass != dev->descriptor.bDeviceClass)) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && -+ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) -+ continue; -+ -+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && -+ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) -+ continue; - -+ return 1; -+ } -+ } - -- /* OTG MESSAGE: report errors here, customize to match your product */ -- dev_err(&dev->dev, "device v%04x p%04x is not supported\n", -- le16_to_cpu(dev->descriptor.idVendor), -- le16_to_cpu(dev->descriptor.idProduct)); -+ /* add other match criteria here ... */ - -+ report_errors(dev); - return 0; - } - ---- /dev/null -+++ b/drivers/usb/gadget/file_storage.c -@@ -0,0 +1,3676 @@ -+/* -+ * file_storage.c -- File-backed USB Storage Gadget, for USB development -+ * -+ * Copyright (C) 2003-2008 Alan Stern -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+/* -+ * The File-backed Storage Gadget acts as a USB Mass Storage device, -+ * appearing to the host as a disk drive or as a CD-ROM drive. In addition -+ * to providing an example of a genuinely useful gadget driver for a USB -+ * device, it also illustrates a technique of double-buffering for increased -+ * throughput. Last but not least, it gives an easy way to probe the -+ * behavior of the Mass Storage drivers in a USB host. -+ * -+ * Backing storage is provided by a regular file or a block device, specified -+ * by the "file" module parameter. Access can be limited to read-only by -+ * setting the optional "ro" module parameter. (For CD-ROM emulation, -+ * access is always read-only.) The gadget will indicate that it has -+ * removable media if the optional "removable" module parameter is set. -+ * -+ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI), -+ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected -+ * by the optional "transport" module parameter. It also supports the -+ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03), -+ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by -+ * the optional "protocol" module parameter. In addition, the default -+ * Vendor ID, Product ID, release number and serial number can be overridden. -+ * -+ * There is support for multiple logical units (LUNs), each of which has -+ * its own backing file. The number of LUNs can be set using the optional -+ * "luns" module parameter (anywhere from 1 to 8), and the corresponding -+ * files are specified using comma-separated lists for "file" and "ro". -+ * The default number of LUNs is taken from the number of "file" elements; -+ * it is 1 if "file" is not given. If "removable" is not set then a backing -+ * file must be specified for each LUN. If it is set, then an unspecified -+ * or empty backing filename means the LUN's medium is not loaded. Ideally -+ * each LUN would be settable independently as a disk drive or a CD-ROM -+ * drive, but currently all LUNs have to be the same type. The CD-ROM -+ * emulation includes a single data track and no audio tracks; hence there -+ * need be only one backing file per LUN. -+ * -+ * Requirements are modest; only a bulk-in and a bulk-out endpoint are -+ * needed (an interrupt-out endpoint is also needed for CBI). The memory -+ * requirement amounts to two 16K buffers, size configurable by a parameter. -+ * Support is included for both full-speed and high-speed operation. -+ * -+ * Note that the driver is slightly non-portable in that it assumes a -+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and -+ * interrupt-in endpoints. With most device controllers this isn't an -+ * issue, but there may be some with hardware restrictions that prevent -+ * a buffer from being used by more than one endpoint. -+ * -+ * Module options: -+ * -+ * file=filename[,filename...] -+ * Required if "removable" is not set, names of -+ * the files or block devices used for -+ * backing storage -+ * serial=HHHH... Required serial number (string of hex chars) -+ * ro=b[,b...] Default false, booleans for read-only access -+ * removable Default false, boolean for removable media -+ * luns=N Default N = number of filenames, number of -+ * LUNs to support -+ * nofua=b[,b...] Default false, booleans for ignore FUA flag -+ * in SCSI WRITE(10,12) commands -+ * stall Default determined according to the type of -+ * USB device controller (usually true), -+ * boolean to permit the driver to halt -+ * bulk endpoints -+ * cdrom Default false, boolean for whether to emulate -+ * a CD-ROM drive -+ * transport=XXX Default BBB, transport name (CB, CBI, or BBB) -+ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or -+ * ATAPI, QIC, UFI, 8070, or SCSI; -+ * also 1 - 6) -+ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID -+ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID -+ * release=0xRRRR Override the USB release number (bcdDevice) -+ * buflen=N Default N=16384, buffer size used (will be -+ * rounded down to a multiple of -+ * PAGE_CACHE_SIZE) -+ * -+ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro", -+ * "removable", "luns", "nofua", "stall", and "cdrom" options are available; -+ * default values are used for everything else. -+ * -+ * The pathnames of the backing files and the ro settings are available in -+ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of -+ * the gadget's sysfs directory. If the "removable" option is set, writing to -+ * these files will simulate ejecting/loading the medium (writing an empty -+ * line means eject) and adjusting a write-enable tab. Changes to the ro -+ * setting are not allowed when the medium is loaded or if CD-ROM emulation -+ * is being used. -+ * -+ * This gadget driver is heavily based on "Gadget Zero" by David Brownell. -+ * The driver's SCSI command interface was based on the "Information -+ * technology - Small Computer System Interface - 2" document from -+ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at -+ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception -+ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the -+ * "Universal Serial Bus Mass Storage Class UFI Command Specification" -+ * document, Revision 1.0, December 14, 1998, available at -+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>. -+ */ -+ -+ -+/* -+ * Driver Design -+ * -+ * The FSG driver is fairly straightforward. There is a main kernel -+ * thread that handles most of the work. Interrupt routines field -+ * callbacks from the controller driver: bulk- and interrupt-request -+ * completion notifications, endpoint-0 events, and disconnect events. -+ * Completion events are passed to the main thread by wakeup calls. Many -+ * ep0 requests are handled at interrupt time, but SetInterface, -+ * SetConfiguration, and device reset requests are forwarded to the -+ * thread in the form of "exceptions" using SIGUSR1 signals (since they -+ * should interrupt any ongoing file I/O operations). -+ * -+ * The thread's main routine implements the standard command/data/status -+ * parts of a SCSI interaction. It and its subroutines are full of tests -+ * for pending signals/exceptions -- all this polling is necessary since -+ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an -+ * indication that the driver really wants to be running in userspace.) -+ * An important point is that so long as the thread is alive it keeps an -+ * open reference to the backing file. This will prevent unmounting -+ * the backing file's underlying filesystem and could cause problems -+ * during system shutdown, for example. To prevent such problems, the -+ * thread catches INT, TERM, and KILL signals and converts them into -+ * an EXIT exception. -+ * -+ * In normal operation the main thread is started during the gadget's -+ * fsg_bind() callback and stopped during fsg_unbind(). But it can also -+ * exit when it receives a signal, and there's no point leaving the -+ * gadget running when the thread is dead. So just before the thread -+ * exits, it deregisters the gadget driver. This makes things a little -+ * tricky: The driver is deregistered at two places, and the exiting -+ * thread can indirectly call fsg_unbind() which in turn can tell the -+ * thread to exit. The first problem is resolved through the use of the -+ * REGISTERED atomic bitflag; the driver will only be deregistered once. -+ * The second problem is resolved by having fsg_unbind() check -+ * fsg->state; it won't try to stop the thread if the state is already -+ * FSG_STATE_TERMINATED. -+ * -+ * To provide maximum throughput, the driver uses a circular pipeline of -+ * buffer heads (struct fsg_buffhd). In principle the pipeline can be -+ * arbitrarily long; in practice the benefits don't justify having more -+ * than 2 stages (i.e., double buffering). But it helps to think of the -+ * pipeline as being a long one. Each buffer head contains a bulk-in and -+ * a bulk-out request pointer (since the buffer can be used for both -+ * output and input -- directions always are given from the host's -+ * point of view) as well as a pointer to the buffer and various state -+ * variables. -+ * -+ * Use of the pipeline follows a simple protocol. There is a variable -+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use. -+ * At any time that buffer head may still be in use from an earlier -+ * request, so each buffer head has a state variable indicating whether -+ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the -+ * buffer head to be EMPTY, filling the buffer either by file I/O or by -+ * USB I/O (during which the buffer head is BUSY), and marking the buffer -+ * head FULL when the I/O is complete. Then the buffer will be emptied -+ * (again possibly by USB I/O, during which it is marked BUSY) and -+ * finally marked EMPTY again (possibly by a completion routine). -+ * -+ * A module parameter tells the driver to avoid stalling the bulk -+ * endpoints wherever the transport specification allows. This is -+ * necessary for some UDCs like the SuperH, which cannot reliably clear a -+ * halt on a bulk endpoint. However, under certain circumstances the -+ * Bulk-only specification requires a stall. In such cases the driver -+ * will halt the endpoint and set a flag indicating that it should clear -+ * the halt in software during the next device reset. Hopefully this -+ * will permit everything to work correctly. Furthermore, although the -+ * specification allows the bulk-out endpoint to halt when the host sends -+ * too much data, implementing this would cause an unavoidable race. -+ * The driver will always use the "no-stall" approach for OUT transfers. -+ * -+ * One subtle point concerns sending status-stage responses for ep0 -+ * requests. Some of these requests, such as device reset, can involve -+ * interrupting an ongoing file I/O operation, which might take an -+ * arbitrarily long time. During that delay the host might give up on -+ * the original ep0 request and issue a new one. When that happens the -+ * driver should not notify the host about completion of the original -+ * request, as the host will no longer be waiting for it. So the driver -+ * assigns to each ep0 request a unique tag, and it keeps track of the -+ * tag value of the request associated with a long-running exception -+ * (device-reset, interface-change, or configuration-change). When the -+ * exception handler is finished, the status-stage response is submitted -+ * only if the current ep0 request tag is equal to the exception request -+ * tag. Thus only the most recently received ep0 request will get a -+ * status-stage response. -+ * -+ * Warning: This driver source file is too long. It ought to be split up -+ * into a header file plus about 3 separate .c files, to handle the details -+ * of the Gadget, USB Mass Storage, and SCSI protocols. -+ */ -+ -+ -+/* #define VERBOSE_DEBUG */ -+/* #define DUMP_MSGS */ -+ -+ -+#include <linux/blkdev.h> -+#include <linux/completion.h> -+#include <linux/dcache.h> -+#include <linux/delay.h> -+#include <linux/device.h> -+#include <linux/fcntl.h> -+#include <linux/file.h> -+#include <linux/fs.h> -+#include <linux/kref.h> -+#include <linux/kthread.h> -+#include <linux/limits.h> -+#include <linux/module.h> -+#include <linux/rwsem.h> -+#include <linux/slab.h> -+#include <linux/spinlock.h> -+#include <linux/string.h> -+#include <linux/freezer.h> -+#include <linux/utsname.h> -+ -+#include <linux/usb/ch9.h> -+#include <linux/usb/gadget.h> -+ -+#include "gadget_chips.h" -+ -+ -+ -+/* -+ * Kbuild is not very cooperative with respect to linking separately -+ * compiled library objects into one module. So for now we won't use -+ * separate compilation ... ensuring init/exit sections work to shrink -+ * the runtime footprint, and giving us at least some parts of what -+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would. -+ */ -+#include "usbstring.c" -+#include "config.c" -+#include "epautoconf.c" -+ -+/*-------------------------------------------------------------------------*/ -+ -+#define DRIVER_DESC "File-backed Storage Gadget" -+#define DRIVER_NAME "g_file_storage" -+#define DRIVER_VERSION "1 September 2010" -+ -+static char fsg_string_manufacturer[64]; -+static const char fsg_string_product[] = DRIVER_DESC; -+static const char fsg_string_config[] = "Self-powered"; -+static const char fsg_string_interface[] = "Mass Storage"; -+ -+ -+#include "storage_common.c" -+ -+ -+MODULE_DESCRIPTION(DRIVER_DESC); -+MODULE_AUTHOR("Alan Stern"); -+MODULE_LICENSE("Dual BSD/GPL"); -+ -+/* -+ * This driver assumes self-powered hardware and has no way for users to -+ * trigger remote wakeup. It uses autoconfiguration to select endpoints -+ * and endpoint addresses. -+ */ -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+ -+/* Encapsulate the module parameter settings */ -+ -+static struct { -+ char *file[FSG_MAX_LUNS]; -+ char *serial; -+ bool ro[FSG_MAX_LUNS]; -+ bool nofua[FSG_MAX_LUNS]; -+ unsigned int num_filenames; -+ unsigned int num_ros; -+ unsigned int num_nofuas; -+ unsigned int nluns; -+ -+ bool removable; -+ bool can_stall; -+ bool cdrom; -+ -+ char *transport_parm; -+ char *protocol_parm; -+ unsigned short vendor; -+ unsigned short product; -+ unsigned short release; -+ unsigned int buflen; -+ -+ int transport_type; -+ char *transport_name; -+ int protocol_type; -+ char *protocol_name; -+ -+} mod_data = { // Default values -+ .transport_parm = "BBB", -+ .protocol_parm = "SCSI", -+ .removable = 0, -+ .can_stall = 1, -+ .cdrom = 0, -+ .vendor = FSG_VENDOR_ID, -+ .product = FSG_PRODUCT_ID, -+ .release = 0xffff, // Use controller chip type -+ .buflen = 16384, -+ }; -+ -+ -+module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames, -+ S_IRUGO); -+MODULE_PARM_DESC(file, "names of backing files or devices"); -+ -+module_param_named(serial, mod_data.serial, charp, S_IRUGO); -+MODULE_PARM_DESC(serial, "USB serial number"); -+ -+module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO); -+MODULE_PARM_DESC(ro, "true to force read-only"); -+ -+module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas, -+ S_IRUGO); -+MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit"); -+ -+module_param_named(luns, mod_data.nluns, uint, S_IRUGO); -+MODULE_PARM_DESC(luns, "number of LUNs"); -+ -+module_param_named(removable, mod_data.removable, bool, S_IRUGO); -+MODULE_PARM_DESC(removable, "true to simulate removable media"); -+ -+module_param_named(stall, mod_data.can_stall, bool, S_IRUGO); -+MODULE_PARM_DESC(stall, "false to prevent bulk stalls"); -+ -+module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO); -+MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk"); -+ -+/* In the non-TEST version, only the module parameters listed above -+ * are available. */ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ -+module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO); -+MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)"); -+ -+module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO); -+MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, " -+ "8070, or SCSI)"); -+ -+module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO); -+MODULE_PARM_DESC(vendor, "USB Vendor ID"); -+ -+module_param_named(product, mod_data.product, ushort, S_IRUGO); -+MODULE_PARM_DESC(product, "USB Product ID"); -+ -+module_param_named(release, mod_data.release, ushort, S_IRUGO); -+MODULE_PARM_DESC(release, "USB release number"); -+ -+module_param_named(buflen, mod_data.buflen, uint, S_IRUGO); -+MODULE_PARM_DESC(buflen, "I/O buffer size"); -+ -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+/* -+ * These definitions will permit the compiler to avoid generating code for -+ * parts of the driver that aren't used in the non-TEST version. Even gcc -+ * can recognize when a test of a constant expression yields a dead code -+ * path. -+ */ -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ -+#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK) -+#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI) -+#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI) -+ -+#else -+ -+#define transport_is_bbb() 1 -+#define transport_is_cbi() 0 -+#define protocol_is_scsi() 1 -+ -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+ -+struct fsg_dev { -+ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ -+ spinlock_t lock; -+ struct usb_gadget *gadget; -+ -+ /* filesem protects: backing files in use */ -+ struct rw_semaphore filesem; -+ -+ /* reference counting: wait until all LUNs are released */ -+ struct kref ref; -+ -+ struct usb_ep *ep0; // Handy copy of gadget->ep0 -+ struct usb_request *ep0req; // For control responses -+ unsigned int ep0_req_tag; -+ const char *ep0req_name; -+ -+ struct usb_request *intreq; // For interrupt responses -+ int intreq_busy; -+ struct fsg_buffhd *intr_buffhd; -+ -+ unsigned int bulk_out_maxpacket; -+ enum fsg_state state; // For exception handling -+ unsigned int exception_req_tag; -+ -+ u8 config, new_config; -+ -+ unsigned int running : 1; -+ unsigned int bulk_in_enabled : 1; -+ unsigned int bulk_out_enabled : 1; -+ unsigned int intr_in_enabled : 1; -+ unsigned int phase_error : 1; -+ unsigned int short_packet_received : 1; -+ unsigned int bad_lun_okay : 1; -+ -+ unsigned long atomic_bitflags; -+#define REGISTERED 0 -+#define IGNORE_BULK_OUT 1 -+#define SUSPENDED 2 -+ -+ struct usb_ep *bulk_in; -+ struct usb_ep *bulk_out; -+ struct usb_ep *intr_in; -+ -+ struct fsg_buffhd *next_buffhd_to_fill; -+ struct fsg_buffhd *next_buffhd_to_drain; -+ -+ int thread_wakeup_needed; -+ struct completion thread_notifier; -+ struct task_struct *thread_task; -+ -+ int cmnd_size; -+ u8 cmnd[MAX_COMMAND_SIZE]; -+ enum data_direction data_dir; -+ u32 data_size; -+ u32 data_size_from_cmnd; -+ u32 tag; -+ unsigned int lun; -+ u32 residue; -+ u32 usb_amount_left; -+ -+ /* The CB protocol offers no way for a host to know when a command -+ * has completed. As a result the next command may arrive early, -+ * and we will still have to handle it. For that reason we need -+ * a buffer to store new commands when using CB (or CBI, which -+ * does not oblige a host to wait for command completion either). */ -+ int cbbuf_cmnd_size; -+ u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; -+ -+ unsigned int nluns; -+ struct fsg_lun *luns; -+ struct fsg_lun *curlun; -+ /* Must be the last entry */ -+ struct fsg_buffhd buffhds[]; -+}; -+ -+typedef void (*fsg_routine_t)(struct fsg_dev *); -+ -+static int exception_in_progress(struct fsg_dev *fsg) -+{ -+ return (fsg->state > FSG_STATE_IDLE); -+} -+ -+/* Make bulk-out requests be divisible by the maxpacket size */ -+static void set_bulk_out_req_length(struct fsg_dev *fsg, -+ struct fsg_buffhd *bh, unsigned int length) -+{ -+ unsigned int rem; -+ -+ bh->bulk_out_intended_length = length; -+ rem = length % fsg->bulk_out_maxpacket; -+ if (rem > 0) -+ length += fsg->bulk_out_maxpacket - rem; -+ bh->outreq->length = length; -+} -+ -+static struct fsg_dev *the_fsg; -+static struct usb_gadget_driver fsg_driver; -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) -+{ -+ const char *name; -+ -+ if (ep == fsg->bulk_in) -+ name = "bulk-in"; -+ else if (ep == fsg->bulk_out) -+ name = "bulk-out"; -+ else -+ name = ep->name; -+ DBG(fsg, "%s set halt\n", name); -+ return usb_ep_set_halt(ep); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* -+ * DESCRIPTORS ... most are static, but strings and (full) configuration -+ * descriptors are built on demand. Also the (static) config and interface -+ * descriptors are adjusted during fsg_bind(). -+ */ -+ -+/* There is only one configuration. */ -+#define CONFIG_VALUE 1 -+ -+static struct usb_device_descriptor -+device_desc = { -+ .bLength = sizeof device_desc, -+ .bDescriptorType = USB_DT_DEVICE, -+ -+ .bcdUSB = cpu_to_le16(0x0200), -+ .bDeviceClass = USB_CLASS_PER_INTERFACE, -+ -+ /* The next three values can be overridden by module parameters */ -+ .idVendor = cpu_to_le16(FSG_VENDOR_ID), -+ .idProduct = cpu_to_le16(FSG_PRODUCT_ID), -+ .bcdDevice = cpu_to_le16(0xffff), -+ -+ .iManufacturer = FSG_STRING_MANUFACTURER, -+ .iProduct = FSG_STRING_PRODUCT, -+ .iSerialNumber = FSG_STRING_SERIAL, -+ .bNumConfigurations = 1, -+}; -+ -+static struct usb_config_descriptor -+config_desc = { -+ .bLength = sizeof config_desc, -+ .bDescriptorType = USB_DT_CONFIG, -+ -+ /* wTotalLength computed by usb_gadget_config_buf() */ -+ .bNumInterfaces = 1, -+ .bConfigurationValue = CONFIG_VALUE, -+ .iConfiguration = FSG_STRING_CONFIG, -+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, -+ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, -+}; -+ -+ -+static struct usb_qualifier_descriptor -+dev_qualifier = { -+ .bLength = sizeof dev_qualifier, -+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, -+ -+ .bcdUSB = cpu_to_le16(0x0200), -+ .bDeviceClass = USB_CLASS_PER_INTERFACE, -+ -+ .bNumConfigurations = 1, -+}; -+ -+static int populate_bos(struct fsg_dev *fsg, u8 *buf) -+{ -+ memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE); -+ buf += USB_DT_BOS_SIZE; -+ -+ memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE); -+ buf += USB_DT_USB_EXT_CAP_SIZE; -+ -+ memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE); -+ -+ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE -+ + USB_DT_USB_EXT_CAP_SIZE; -+} -+ -+/* -+ * Config descriptors must agree with the code that sets configurations -+ * and with code managing interfaces and their altsettings. They must -+ * also handle different speeds and other-speed requests. -+ */ -+static int populate_config_buf(struct usb_gadget *gadget, -+ u8 *buf, u8 type, unsigned index) -+{ -+ enum usb_device_speed speed = gadget->speed; -+ int len; -+ const struct usb_descriptor_header **function; -+ -+ if (index > 0) -+ return -EINVAL; -+ -+ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) -+ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; -+ function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH -+ ? (const struct usb_descriptor_header **)fsg_hs_function -+ : (const struct usb_descriptor_header **)fsg_fs_function; -+ -+ /* for now, don't advertise srp-only devices */ -+ if (!gadget_is_otg(gadget)) -+ function++; -+ -+ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function); -+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; -+ return len; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* These routines may be called in process context or in_irq */ -+ -+/* Caller must hold fsg->lock */ -+static void wakeup_thread(struct fsg_dev *fsg) -+{ -+ /* Tell the main thread that something has happened */ -+ fsg->thread_wakeup_needed = 1; -+ if (fsg->thread_task) -+ wake_up_process(fsg->thread_task); -+} -+ -+ -+static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state) -+{ -+ unsigned long flags; -+ -+ /* Do nothing if a higher-priority exception is already in progress. -+ * If a lower-or-equal priority exception is in progress, preempt it -+ * and notify the main thread by sending it a signal. */ -+ spin_lock_irqsave(&fsg->lock, flags); -+ if (fsg->state <= new_state) { -+ fsg->exception_req_tag = fsg->ep0_req_tag; -+ fsg->state = new_state; -+ if (fsg->thread_task) -+ send_sig_info(SIGUSR1, SEND_SIG_FORCED, -+ fsg->thread_task); -+ } -+ spin_unlock_irqrestore(&fsg->lock, flags); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* The disconnect callback and ep0 routines. These always run in_irq, -+ * except that ep0_queue() is called in the main thread to acknowledge -+ * completion of various requests: set config, set interface, and -+ * Bulk-only device reset. */ -+ -+static void fsg_disconnect(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ -+ DBG(fsg, "disconnect or port reset\n"); -+ raise_exception(fsg, FSG_STATE_DISCONNECT); -+} -+ -+ -+static int ep0_queue(struct fsg_dev *fsg) -+{ -+ int rc; -+ -+ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC); -+ if (rc != 0 && rc != -ESHUTDOWN) { -+ -+ /* We can't do much more than wait for a reset */ -+ WARNING(fsg, "error in submission: %s --> %d\n", -+ fsg->ep0->name, rc); -+ } -+ return rc; -+} -+ -+static void ep0_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ -+ if (req->actual > 0) -+ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual); -+ if (req->status || req->actual != req->length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, req->length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ if (req->status == 0 && req->context) -+ ((fsg_routine_t) (req->context))(fsg); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Bulk and interrupt endpoint completion handlers. -+ * These always run in_irq. */ -+ -+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ struct fsg_buffhd *bh = req->context; -+ -+ if (req->status || req->actual != req->length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, req->length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ /* Hold the lock while we update the request and buffer states */ -+ smp_wmb(); -+ spin_lock(&fsg->lock); -+ bh->inreq_busy = 0; -+ bh->state = BUF_STATE_EMPTY; -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ struct fsg_buffhd *bh = req->context; -+ -+ dump_msg(fsg, "bulk-out", req->buf, req->actual); -+ if (req->status || req->actual != bh->bulk_out_intended_length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, -+ bh->bulk_out_intended_length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ /* Hold the lock while we update the request and buffer states */ -+ smp_wmb(); -+ spin_lock(&fsg->lock); -+ bh->outreq_busy = 0; -+ bh->state = BUF_STATE_FULL; -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -+{ -+ struct fsg_dev *fsg = ep->driver_data; -+ struct fsg_buffhd *bh = req->context; -+ -+ if (req->status || req->actual != req->length) -+ DBG(fsg, "%s --> %d, %u/%u\n", __func__, -+ req->status, req->actual, req->length); -+ if (req->status == -ECONNRESET) // Request was cancelled -+ usb_ep_fifo_flush(ep); -+ -+ /* Hold the lock while we update the request and buffer states */ -+ smp_wmb(); -+ spin_lock(&fsg->lock); -+ fsg->intreq_busy = 0; -+ bh->state = BUF_STATE_EMPTY; -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+#else -+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req) -+{} -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Ep0 class-specific handlers. These always run in_irq. */ -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct usb_request *req = fsg->ep0req; -+ static u8 cbi_reset_cmnd[6] = { -+ SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff}; -+ -+ /* Error in command transfer? */ -+ if (req->status || req->length != req->actual || -+ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) { -+ -+ /* Not all controllers allow a protocol stall after -+ * receiving control-out data, but we'll try anyway. */ -+ fsg_set_halt(fsg, fsg->ep0); -+ return; // Wait for reset -+ } -+ -+ /* Is it the special reset command? */ -+ if (req->actual >= sizeof cbi_reset_cmnd && -+ memcmp(req->buf, cbi_reset_cmnd, -+ sizeof cbi_reset_cmnd) == 0) { -+ -+ /* Raise an exception to stop the current operation -+ * and reinitialize our state. */ -+ DBG(fsg, "cbi reset request\n"); -+ raise_exception(fsg, FSG_STATE_RESET); -+ return; -+ } -+ -+ VDBG(fsg, "CB[I] accept device-specific command\n"); -+ spin_lock(&fsg->lock); -+ -+ /* Save the command for later */ -+ if (fsg->cbbuf_cmnd_size) -+ WARNING(fsg, "CB[I] overwriting previous command\n"); -+ fsg->cbbuf_cmnd_size = req->actual; -+ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size); -+ -+ wakeup_thread(fsg); -+ spin_unlock(&fsg->lock); -+} -+ -+#else -+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{} -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ -+static int class_setup_req(struct fsg_dev *fsg, -+ const struct usb_ctrlrequest *ctrl) -+{ -+ struct usb_request *req = fsg->ep0req; -+ int value = -EOPNOTSUPP; -+ u16 w_index = le16_to_cpu(ctrl->wIndex); -+ u16 w_value = le16_to_cpu(ctrl->wValue); -+ u16 w_length = le16_to_cpu(ctrl->wLength); -+ -+ if (!fsg->config) -+ return value; -+ -+ /* Handle Bulk-only class-specific requests */ -+ if (transport_is_bbb()) { -+ switch (ctrl->bRequest) { -+ -+ case US_BULK_RESET_REQUEST: -+ if (ctrl->bRequestType != (USB_DIR_OUT | -+ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) -+ break; -+ if (w_index != 0 || w_value != 0 || w_length != 0) { -+ value = -EDOM; -+ break; -+ } -+ -+ /* Raise an exception to stop the current operation -+ * and reinitialize our state. */ -+ DBG(fsg, "bulk reset request\n"); -+ raise_exception(fsg, FSG_STATE_RESET); -+ value = DELAYED_STATUS; -+ break; -+ -+ case US_BULK_GET_MAX_LUN: -+ if (ctrl->bRequestType != (USB_DIR_IN | -+ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) -+ break; -+ if (w_index != 0 || w_value != 0 || w_length != 1) { -+ value = -EDOM; -+ break; -+ } -+ VDBG(fsg, "get max LUN\n"); -+ *(u8 *) req->buf = fsg->nluns - 1; -+ value = 1; -+ break; -+ } -+ } -+ -+ /* Handle CBI class-specific requests */ -+ else { -+ switch (ctrl->bRequest) { -+ -+ case USB_CBI_ADSC_REQUEST: -+ if (ctrl->bRequestType != (USB_DIR_OUT | -+ USB_TYPE_CLASS | USB_RECIP_INTERFACE)) -+ break; -+ if (w_index != 0 || w_value != 0) { -+ value = -EDOM; -+ break; -+ } -+ if (w_length > MAX_COMMAND_SIZE) { -+ value = -EOVERFLOW; -+ break; -+ } -+ value = w_length; -+ fsg->ep0req->context = received_cbi_adsc; -+ break; -+ } -+ } -+ -+ if (value == -EOPNOTSUPP) -+ VDBG(fsg, -+ "unknown class-specific control req " -+ "%02x.%02x v%04x i%04x l%u\n", -+ ctrl->bRequestType, ctrl->bRequest, -+ le16_to_cpu(ctrl->wValue), w_index, w_length); -+ return value; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Ep0 standard request handlers. These always run in_irq. */ -+ -+static int standard_setup_req(struct fsg_dev *fsg, -+ const struct usb_ctrlrequest *ctrl) -+{ -+ struct usb_request *req = fsg->ep0req; -+ int value = -EOPNOTSUPP; -+ u16 w_index = le16_to_cpu(ctrl->wIndex); -+ u16 w_value = le16_to_cpu(ctrl->wValue); -+ -+ /* Usually this just stores reply data in the pre-allocated ep0 buffer, -+ * but config change events will also reconfigure hardware. */ -+ switch (ctrl->bRequest) { -+ -+ case USB_REQ_GET_DESCRIPTOR: -+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ switch (w_value >> 8) { -+ -+ case USB_DT_DEVICE: -+ VDBG(fsg, "get device descriptor\n"); -+ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket; -+ value = sizeof device_desc; -+ memcpy(req->buf, &device_desc, value); -+ break; -+ case USB_DT_DEVICE_QUALIFIER: -+ VDBG(fsg, "get device qualifier\n"); -+ if (!gadget_is_dualspeed(fsg->gadget) || -+ fsg->gadget->speed == USB_SPEED_SUPER) -+ break; -+ /* -+ * Assume ep0 uses the same maxpacket value for both -+ * speeds -+ */ -+ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; -+ value = sizeof dev_qualifier; -+ memcpy(req->buf, &dev_qualifier, value); -+ break; -+ -+ case USB_DT_OTHER_SPEED_CONFIG: -+ VDBG(fsg, "get other-speed config descriptor\n"); -+ if (!gadget_is_dualspeed(fsg->gadget) || -+ fsg->gadget->speed == USB_SPEED_SUPER) -+ break; -+ goto get_config; -+ case USB_DT_CONFIG: -+ VDBG(fsg, "get configuration descriptor\n"); -+get_config: -+ value = populate_config_buf(fsg->gadget, -+ req->buf, -+ w_value >> 8, -+ w_value & 0xff); -+ break; -+ -+ case USB_DT_STRING: -+ VDBG(fsg, "get string descriptor\n"); -+ -+ /* wIndex == language code */ -+ value = usb_gadget_get_string(&fsg_stringtab, -+ w_value & 0xff, req->buf); -+ break; -+ -+ case USB_DT_BOS: -+ VDBG(fsg, "get bos descriptor\n"); -+ -+ if (gadget_is_superspeed(fsg->gadget)) -+ value = populate_bos(fsg, req->buf); -+ break; -+ } -+ -+ break; -+ -+ /* One config, two speeds */ -+ case USB_REQ_SET_CONFIGURATION: -+ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ VDBG(fsg, "set configuration\n"); -+ if (w_value == CONFIG_VALUE || w_value == 0) { -+ fsg->new_config = w_value; -+ -+ /* Raise an exception to wipe out previous transaction -+ * state (queued bufs, etc) and set the new config. */ -+ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE); -+ value = DELAYED_STATUS; -+ } -+ break; -+ case USB_REQ_GET_CONFIGURATION: -+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | -+ USB_RECIP_DEVICE)) -+ break; -+ VDBG(fsg, "get configuration\n"); -+ *(u8 *) req->buf = fsg->config; -+ value = 1; -+ break; -+ -+ case USB_REQ_SET_INTERFACE: -+ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD | -+ USB_RECIP_INTERFACE)) -+ break; -+ if (fsg->config && w_index == 0) { -+ -+ /* Raise an exception to wipe out previous transaction -+ * state (queued bufs, etc) and install the new -+ * interface altsetting. */ -+ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE); -+ value = DELAYED_STATUS; -+ } -+ break; -+ case USB_REQ_GET_INTERFACE: -+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD | -+ USB_RECIP_INTERFACE)) -+ break; -+ if (!fsg->config) -+ break; -+ if (w_index != 0) { -+ value = -EDOM; -+ break; -+ } -+ VDBG(fsg, "get interface\n"); -+ *(u8 *) req->buf = 0; -+ value = 1; -+ break; -+ -+ default: -+ VDBG(fsg, -+ "unknown control req %02x.%02x v%04x i%04x l%u\n", -+ ctrl->bRequestType, ctrl->bRequest, -+ w_value, w_index, le16_to_cpu(ctrl->wLength)); -+ } -+ -+ return value; -+} -+ -+ -+static int fsg_setup(struct usb_gadget *gadget, -+ const struct usb_ctrlrequest *ctrl) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ int rc; -+ int w_length = le16_to_cpu(ctrl->wLength); -+ -+ ++fsg->ep0_req_tag; // Record arrival of a new request -+ fsg->ep0req->context = NULL; -+ fsg->ep0req->length = 0; -+ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl)); -+ -+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS) -+ rc = class_setup_req(fsg, ctrl); -+ else -+ rc = standard_setup_req(fsg, ctrl); -+ -+ /* Respond with data/status or defer until later? */ -+ if (rc >= 0 && rc != DELAYED_STATUS) { -+ rc = min(rc, w_length); -+ fsg->ep0req->length = rc; -+ fsg->ep0req->zero = rc < w_length; -+ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ? -+ "ep0-in" : "ep0-out"); -+ rc = ep0_queue(fsg); -+ } -+ -+ /* Device either stalls (rc < 0) or reports success */ -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* All the following routines run in process context */ -+ -+ -+/* Use this for bulk or interrupt transfers, not ep0 */ -+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep, -+ struct usb_request *req, int *pbusy, -+ enum fsg_buffer_state *state) -+{ -+ int rc; -+ -+ if (ep == fsg->bulk_in) -+ dump_msg(fsg, "bulk-in", req->buf, req->length); -+ else if (ep == fsg->intr_in) -+ dump_msg(fsg, "intr-in", req->buf, req->length); -+ -+ spin_lock_irq(&fsg->lock); -+ *pbusy = 1; -+ *state = BUF_STATE_BUSY; -+ spin_unlock_irq(&fsg->lock); -+ rc = usb_ep_queue(ep, req, GFP_KERNEL); -+ if (rc != 0) { -+ *pbusy = 0; -+ *state = BUF_STATE_EMPTY; -+ -+ /* We can't do much more than wait for a reset */ -+ -+ /* Note: currently the net2280 driver fails zero-length -+ * submissions if DMA is enabled. */ -+ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP && -+ req->length == 0)) -+ WARNING(fsg, "error in submission: %s --> %d\n", -+ ep->name, rc); -+ } -+} -+ -+ -+static int sleep_thread(struct fsg_dev *fsg) -+{ -+ int rc = 0; -+ -+ /* Wait until a signal arrives or we are woken up */ -+ for (;;) { -+ try_to_freeze(); -+ set_current_state(TASK_INTERRUPTIBLE); -+ if (signal_pending(current)) { -+ rc = -EINTR; -+ break; -+ } -+ if (fsg->thread_wakeup_needed) -+ break; -+ schedule(); -+ } -+ __set_current_state(TASK_RUNNING); -+ fsg->thread_wakeup_needed = 0; -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_read(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba; -+ struct fsg_buffhd *bh; -+ int rc; -+ u32 amount_left; -+ loff_t file_offset, file_offset_tmp; -+ unsigned int amount; -+ ssize_t nread; -+ -+ /* Get the starting Logical Block Address and check that it's -+ * not too big */ -+ if (fsg->cmnd[0] == READ_6) -+ lba = get_unaligned_be24(&fsg->cmnd[1]); -+ else { -+ lba = get_unaligned_be32(&fsg->cmnd[2]); -+ -+ /* We allow DPO (Disable Page Out = don't save data in the -+ * cache) and FUA (Force Unit Access = don't read from the -+ * cache), but we don't implement them. */ -+ if ((fsg->cmnd[1] & ~0x18) != 0) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ } -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ file_offset = ((loff_t) lba) << curlun->blkbits; -+ -+ /* Carry out the file reads */ -+ amount_left = fsg->data_size_from_cmnd; -+ if (unlikely(amount_left == 0)) -+ return -EIO; // No default reply -+ -+ for (;;) { -+ -+ /* Figure out how much we need to read: -+ * Try to read the remaining amount. -+ * But don't read more than the buffer size. -+ * And don't try to read past the end of the file. -+ */ -+ amount = min((unsigned int) amount_left, mod_data.buflen); -+ amount = min((loff_t) amount, -+ curlun->file_length - file_offset); -+ -+ /* Wait for the next buffer to become available */ -+ bh = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ /* If we were asked to read past the end of file, -+ * end with an empty buffer. */ -+ if (amount == 0) { -+ curlun->sense_data = -+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ bh->inreq->length = 0; -+ bh->state = BUF_STATE_FULL; -+ break; -+ } -+ -+ /* Perform the read */ -+ file_offset_tmp = file_offset; -+ nread = vfs_read(curlun->filp, -+ (char __user *) bh->buf, -+ amount, &file_offset_tmp); -+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, -+ (unsigned long long) file_offset, -+ (int) nread); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ if (nread < 0) { -+ LDBG(curlun, "error in file read: %d\n", -+ (int) nread); -+ nread = 0; -+ } else if (nread < amount) { -+ LDBG(curlun, "partial file read: %d/%u\n", -+ (int) nread, amount); -+ nread = round_down(nread, curlun->blksize); -+ } -+ file_offset += nread; -+ amount_left -= nread; -+ fsg->residue -= nread; -+ -+ /* Except at the end of the transfer, nread will be -+ * equal to the buffer size, which is divisible by the -+ * bulk-in maxpacket size. -+ */ -+ bh->inreq->length = nread; -+ bh->state = BUF_STATE_FULL; -+ -+ /* If an error occurred, report it and its position */ -+ if (nread < amount) { -+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ if (amount_left == 0) -+ break; // No more left to read -+ -+ /* Send this buffer and go read some more */ -+ bh->inreq->zero = 0; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ } -+ -+ return -EIO; // No default reply -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_write(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba; -+ struct fsg_buffhd *bh; -+ int get_some_more; -+ u32 amount_left_to_req, amount_left_to_write; -+ loff_t usb_offset, file_offset, file_offset_tmp; -+ unsigned int amount; -+ ssize_t nwritten; -+ int rc; -+ -+ if (curlun->ro) { -+ curlun->sense_data = SS_WRITE_PROTECTED; -+ return -EINVAL; -+ } -+ spin_lock(&curlun->filp->f_lock); -+ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait -+ spin_unlock(&curlun->filp->f_lock); -+ -+ /* Get the starting Logical Block Address and check that it's -+ * not too big */ -+ if (fsg->cmnd[0] == WRITE_6) -+ lba = get_unaligned_be24(&fsg->cmnd[1]); -+ else { -+ lba = get_unaligned_be32(&fsg->cmnd[2]); -+ -+ /* We allow DPO (Disable Page Out = don't save data in the -+ * cache) and FUA (Force Unit Access = write directly to the -+ * medium). We don't implement DPO; we implement FUA by -+ * performing synchronous output. */ -+ if ((fsg->cmnd[1] & ~0x18) != 0) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ /* FUA */ -+ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) { -+ spin_lock(&curlun->filp->f_lock); -+ curlun->filp->f_flags |= O_DSYNC; -+ spin_unlock(&curlun->filp->f_lock); -+ } -+ } -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ -+ /* Carry out the file writes */ -+ get_some_more = 1; -+ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits; -+ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd; -+ -+ while (amount_left_to_write > 0) { -+ -+ /* Queue a request for more data from the host */ -+ bh = fsg->next_buffhd_to_fill; -+ if (bh->state == BUF_STATE_EMPTY && get_some_more) { -+ -+ /* Figure out how much we want to get: -+ * Try to get the remaining amount, -+ * but not more than the buffer size. -+ */ -+ amount = min(amount_left_to_req, mod_data.buflen); -+ -+ /* Beyond the end of the backing file? */ -+ if (usb_offset >= curlun->file_length) { -+ get_some_more = 0; -+ curlun->sense_data = -+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ curlun->sense_data_info = usb_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ continue; -+ } -+ -+ /* Get the next buffer */ -+ usb_offset += amount; -+ fsg->usb_amount_left -= amount; -+ amount_left_to_req -= amount; -+ if (amount_left_to_req == 0) -+ get_some_more = 0; -+ -+ /* Except at the end of the transfer, amount will be -+ * equal to the buffer size, which is divisible by -+ * the bulk-out maxpacket size. -+ */ -+ set_bulk_out_req_length(fsg, bh, amount); -+ start_transfer(fsg, fsg->bulk_out, bh->outreq, -+ &bh->outreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ continue; -+ } -+ -+ /* Write the received data to the backing file */ -+ bh = fsg->next_buffhd_to_drain; -+ if (bh->state == BUF_STATE_EMPTY && !get_some_more) -+ break; // We stopped early -+ if (bh->state == BUF_STATE_FULL) { -+ smp_rmb(); -+ fsg->next_buffhd_to_drain = bh->next; -+ bh->state = BUF_STATE_EMPTY; -+ -+ /* Did something go wrong with the transfer? */ -+ if (bh->outreq->status != 0) { -+ curlun->sense_data = SS_COMMUNICATION_FAILURE; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ amount = bh->outreq->actual; -+ if (curlun->file_length - file_offset < amount) { -+ LERROR(curlun, -+ "write %u @ %llu beyond end %llu\n", -+ amount, (unsigned long long) file_offset, -+ (unsigned long long) curlun->file_length); -+ amount = curlun->file_length - file_offset; -+ } -+ -+ /* Don't accept excess data. The spec doesn't say -+ * what to do in this case. We'll ignore the error. -+ */ -+ amount = min(amount, bh->bulk_out_intended_length); -+ -+ /* Don't write a partial block */ -+ amount = round_down(amount, curlun->blksize); -+ if (amount == 0) -+ goto empty_write; -+ -+ /* Perform the write */ -+ file_offset_tmp = file_offset; -+ nwritten = vfs_write(curlun->filp, -+ (char __user *) bh->buf, -+ amount, &file_offset_tmp); -+ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount, -+ (unsigned long long) file_offset, -+ (int) nwritten); -+ if (signal_pending(current)) -+ return -EINTR; // Interrupted! -+ -+ if (nwritten < 0) { -+ LDBG(curlun, "error in file write: %d\n", -+ (int) nwritten); -+ nwritten = 0; -+ } else if (nwritten < amount) { -+ LDBG(curlun, "partial file write: %d/%u\n", -+ (int) nwritten, amount); -+ nwritten = round_down(nwritten, curlun->blksize); -+ } -+ file_offset += nwritten; -+ amount_left_to_write -= nwritten; -+ fsg->residue -= nwritten; -+ -+ /* If an error occurred, report it and its position */ -+ if (nwritten < amount) { -+ curlun->sense_data = SS_WRITE_ERROR; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ empty_write: -+ /* Did the host decide to stop early? */ -+ if (bh->outreq->actual < bh->bulk_out_intended_length) { -+ fsg->short_packet_received = 1; -+ break; -+ } -+ continue; -+ } -+ -+ /* Wait for something to happen */ -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ return -EIO; // No default reply -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_synchronize_cache(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int rc; -+ -+ /* We ignore the requested LBA and write out all file's -+ * dirty data buffers. */ -+ rc = fsg_lun_fsync_sub(curlun); -+ if (rc) -+ curlun->sense_data = SS_WRITE_ERROR; -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void invalidate_sub(struct fsg_lun *curlun) -+{ -+ struct file *filp = curlun->filp; -+ struct inode *inode = filp->f_path.dentry->d_inode; -+ unsigned long rc; -+ -+ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1); -+ VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc); -+} -+ -+static int do_verify(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba; -+ u32 verification_length; -+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; -+ loff_t file_offset, file_offset_tmp; -+ u32 amount_left; -+ unsigned int amount; -+ ssize_t nread; -+ -+ /* Get the starting Logical Block Address and check that it's -+ * not too big */ -+ lba = get_unaligned_be32(&fsg->cmnd[2]); -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ -+ /* We allow DPO (Disable Page Out = don't save data in the -+ * cache) but we don't implement it. */ -+ if ((fsg->cmnd[1] & ~0x10) != 0) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ verification_length = get_unaligned_be16(&fsg->cmnd[7]); -+ if (unlikely(verification_length == 0)) -+ return -EIO; // No default reply -+ -+ /* Prepare to carry out the file verify */ -+ amount_left = verification_length << curlun->blkbits; -+ file_offset = ((loff_t) lba) << curlun->blkbits; -+ -+ /* Write out all the dirty buffers before invalidating them */ -+ fsg_lun_fsync_sub(curlun); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ invalidate_sub(curlun); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ /* Just try to read the requested blocks */ -+ while (amount_left > 0) { -+ -+ /* Figure out how much we need to read: -+ * Try to read the remaining amount, but not more than -+ * the buffer size. -+ * And don't try to read past the end of the file. -+ */ -+ amount = min((unsigned int) amount_left, mod_data.buflen); -+ amount = min((loff_t) amount, -+ curlun->file_length - file_offset); -+ if (amount == 0) { -+ curlun->sense_data = -+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ -+ /* Perform the read */ -+ file_offset_tmp = file_offset; -+ nread = vfs_read(curlun->filp, -+ (char __user *) bh->buf, -+ amount, &file_offset_tmp); -+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount, -+ (unsigned long long) file_offset, -+ (int) nread); -+ if (signal_pending(current)) -+ return -EINTR; -+ -+ if (nread < 0) { -+ LDBG(curlun, "error in file verify: %d\n", -+ (int) nread); -+ nread = 0; -+ } else if (nread < amount) { -+ LDBG(curlun, "partial file verify: %d/%u\n", -+ (int) nread, amount); -+ nread = round_down(nread, curlun->blksize); -+ } -+ if (nread == 0) { -+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR; -+ curlun->sense_data_info = file_offset >> curlun->blkbits; -+ curlun->info_valid = 1; -+ break; -+ } -+ file_offset += nread; -+ amount_left -= nread; -+ } -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ u8 *buf = (u8 *) bh->buf; -+ -+ static char vendor_id[] = "Linux "; -+ static char product_disk_id[] = "File-Stor Gadget"; -+ static char product_cdrom_id[] = "File-CD Gadget "; -+ -+ if (!fsg->curlun) { // Unsupported LUNs are okay -+ fsg->bad_lun_okay = 1; -+ memset(buf, 0, 36); -+ buf[0] = 0x7f; // Unsupported, no device-type -+ buf[4] = 31; // Additional length -+ return 36; -+ } -+ -+ memset(buf, 0, 8); -+ buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK); -+ if (mod_data.removable) -+ buf[1] = 0x80; -+ buf[2] = 2; // ANSI SCSI level 2 -+ buf[3] = 2; // SCSI-2 INQUIRY data format -+ buf[4] = 31; // Additional length -+ // No special options -+ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id, -+ (mod_data.cdrom ? product_cdrom_id : -+ product_disk_id), -+ mod_data.release); -+ return 36; -+} -+ -+ -+static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u8 *buf = (u8 *) bh->buf; -+ u32 sd, sdinfo; -+ int valid; -+ -+ /* -+ * From the SCSI-2 spec., section 7.9 (Unit attention condition): -+ * -+ * If a REQUEST SENSE command is received from an initiator -+ * with a pending unit attention condition (before the target -+ * generates the contingent allegiance condition), then the -+ * target shall either: -+ * a) report any pending sense data and preserve the unit -+ * attention condition on the logical unit, or, -+ * b) report the unit attention condition, may discard any -+ * pending sense data, and clear the unit attention -+ * condition on the logical unit for that initiator. -+ * -+ * FSG normally uses option a); enable this code to use option b). -+ */ -+#if 0 -+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) { -+ curlun->sense_data = curlun->unit_attention_data; -+ curlun->unit_attention_data = SS_NO_SENSE; -+ } -+#endif -+ -+ if (!curlun) { // Unsupported LUNs are okay -+ fsg->bad_lun_okay = 1; -+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; -+ sdinfo = 0; -+ valid = 0; -+ } else { -+ sd = curlun->sense_data; -+ sdinfo = curlun->sense_data_info; -+ valid = curlun->info_valid << 7; -+ curlun->sense_data = SS_NO_SENSE; -+ curlun->sense_data_info = 0; -+ curlun->info_valid = 0; -+ } -+ -+ memset(buf, 0, 18); -+ buf[0] = valid | 0x70; // Valid, current error -+ buf[2] = SK(sd); -+ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */ -+ buf[7] = 18 - 8; // Additional sense length -+ buf[12] = ASC(sd); -+ buf[13] = ASCQ(sd); -+ return 18; -+} -+ -+ -+static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); -+ int pmi = fsg->cmnd[8]; -+ u8 *buf = (u8 *) bh->buf; -+ -+ /* Check the PMI and LBA fields */ -+ if (pmi > 1 || (pmi == 0 && lba != 0)) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]); -+ /* Max logical block */ -+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ -+ return 8; -+} -+ -+ -+static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int msf = fsg->cmnd[1] & 0x02; -+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]); -+ u8 *buf = (u8 *) bh->buf; -+ -+ if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */ -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ if (lba >= curlun->num_sectors) { -+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -+ return -EINVAL; -+ } -+ -+ memset(buf, 0, 8); -+ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */ -+ store_cdrom_address(&buf[4], msf, lba); -+ return 8; -+} -+ -+ -+static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int msf = fsg->cmnd[1] & 0x02; -+ int start_track = fsg->cmnd[6]; -+ u8 *buf = (u8 *) bh->buf; -+ -+ if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */ -+ start_track > 1) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ memset(buf, 0, 20); -+ buf[1] = (20-2); /* TOC data length */ -+ buf[2] = 1; /* First track number */ -+ buf[3] = 1; /* Last track number */ -+ buf[5] = 0x16; /* Data track, copying allowed */ -+ buf[6] = 0x01; /* Only track is number 1 */ -+ store_cdrom_address(&buf[8], msf, 0); -+ -+ buf[13] = 0x16; /* Lead-out track is data */ -+ buf[14] = 0xAA; /* Lead-out track number */ -+ store_cdrom_address(&buf[16], msf, curlun->num_sectors); -+ return 20; -+} -+ -+ -+static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int mscmnd = fsg->cmnd[0]; -+ u8 *buf = (u8 *) bh->buf; -+ u8 *buf0 = buf; -+ int pc, page_code; -+ int changeable_values, all_pages; -+ int valid_page = 0; -+ int len, limit; -+ -+ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ pc = fsg->cmnd[2] >> 6; -+ page_code = fsg->cmnd[2] & 0x3f; -+ if (pc == 3) { -+ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; -+ return -EINVAL; -+ } -+ changeable_values = (pc == 1); -+ all_pages = (page_code == 0x3f); -+ -+ /* Write the mode parameter header. Fixed values are: default -+ * medium type, no cache control (DPOFUA), and no block descriptors. -+ * The only variable value is the WriteProtect bit. We will fill in -+ * the mode data length later. */ -+ memset(buf, 0, 8); -+ if (mscmnd == MODE_SENSE) { -+ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA -+ buf += 4; -+ limit = 255; -+ } else { // MODE_SENSE_10 -+ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA -+ buf += 8; -+ limit = 65535; // Should really be mod_data.buflen -+ } -+ -+ /* No block descriptors */ -+ -+ /* The mode pages, in numerical order. The only page we support -+ * is the Caching page. */ -+ if (page_code == 0x08 || all_pages) { -+ valid_page = 1; -+ buf[0] = 0x08; // Page code -+ buf[1] = 10; // Page length -+ memset(buf+2, 0, 10); // None of the fields are changeable -+ -+ if (!changeable_values) { -+ buf[2] = 0x04; // Write cache enable, -+ // Read cache not disabled -+ // No cache retention priorities -+ put_unaligned_be16(0xffff, &buf[4]); -+ /* Don't disable prefetch */ -+ /* Minimum prefetch = 0 */ -+ put_unaligned_be16(0xffff, &buf[8]); -+ /* Maximum prefetch */ -+ put_unaligned_be16(0xffff, &buf[10]); -+ /* Maximum prefetch ceiling */ -+ } -+ buf += 12; -+ } -+ -+ /* Check that a valid page was requested and the mode data length -+ * isn't too long. */ -+ len = buf - buf0; -+ if (!valid_page || len > limit) { -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ /* Store the mode data length */ -+ if (mscmnd == MODE_SENSE) -+ buf0[0] = len - 1; -+ else -+ put_unaligned_be16(len - 2, buf0); -+ return len; -+} -+ -+ -+static int do_start_stop(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int loej, start; -+ -+ if (!mod_data.removable) { -+ curlun->sense_data = SS_INVALID_COMMAND; -+ return -EINVAL; -+ } -+ -+ // int immed = fsg->cmnd[1] & 0x01; -+ loej = fsg->cmnd[4] & 0x02; -+ start = fsg->cmnd[4] & 0x01; -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed -+ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ if (!start) { -+ -+ /* Are we allowed to unload the media? */ -+ if (curlun->prevent_medium_removal) { -+ LDBG(curlun, "unload attempt prevented\n"); -+ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED; -+ return -EINVAL; -+ } -+ if (loej) { // Simulate an unload/eject -+ up_read(&fsg->filesem); -+ down_write(&fsg->filesem); -+ fsg_lun_close(curlun); -+ up_write(&fsg->filesem); -+ down_read(&fsg->filesem); -+ } -+ } else { -+ -+ /* Our emulation doesn't support mounting; the medium is -+ * available for use as soon as it is loaded. */ -+ if (!fsg_lun_is_open(curlun)) { -+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; -+ return -EINVAL; -+ } -+ } -+#endif -+ return 0; -+} -+ -+ -+static int do_prevent_allow(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ int prevent; -+ -+ if (!mod_data.removable) { -+ curlun->sense_data = SS_INVALID_COMMAND; -+ return -EINVAL; -+ } -+ -+ prevent = fsg->cmnd[4] & 0x01; -+ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ -+ if (curlun->prevent_medium_removal && !prevent) -+ fsg_lun_fsync_sub(curlun); -+ curlun->prevent_medium_removal = prevent; -+ return 0; -+} -+ -+ -+static int do_read_format_capacities(struct fsg_dev *fsg, -+ struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ u8 *buf = (u8 *) bh->buf; -+ -+ buf[0] = buf[1] = buf[2] = 0; -+ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor -+ buf += 4; -+ -+ put_unaligned_be32(curlun->num_sectors, &buf[0]); -+ /* Number of blocks */ -+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */ -+ buf[4] = 0x02; /* Current capacity */ -+ return 12; -+} -+ -+ -+static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ -+ /* We don't support MODE SELECT */ -+ curlun->sense_data = SS_INVALID_COMMAND; -+ return -EINVAL; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int halt_bulk_in_endpoint(struct fsg_dev *fsg) -+{ -+ int rc; -+ -+ rc = fsg_set_halt(fsg, fsg->bulk_in); -+ if (rc == -EAGAIN) -+ VDBG(fsg, "delayed bulk-in endpoint halt\n"); -+ while (rc != 0) { -+ if (rc != -EAGAIN) { -+ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc); -+ rc = 0; -+ break; -+ } -+ -+ /* Wait for a short time and then try again */ -+ if (msleep_interruptible(100) != 0) -+ return -EINTR; -+ rc = usb_ep_set_halt(fsg->bulk_in); -+ } -+ return rc; -+} -+ -+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg) -+{ -+ int rc; -+ -+ DBG(fsg, "bulk-in set wedge\n"); -+ rc = usb_ep_set_wedge(fsg->bulk_in); -+ if (rc == -EAGAIN) -+ VDBG(fsg, "delayed bulk-in endpoint wedge\n"); -+ while (rc != 0) { -+ if (rc != -EAGAIN) { -+ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc); -+ rc = 0; -+ break; -+ } -+ -+ /* Wait for a short time and then try again */ -+ if (msleep_interruptible(100) != 0) -+ return -EINTR; -+ rc = usb_ep_set_wedge(fsg->bulk_in); -+ } -+ return rc; -+} -+ -+static int throw_away_data(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh; -+ u32 amount; -+ int rc; -+ -+ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY || -+ fsg->usb_amount_left > 0) { -+ -+ /* Throw away the data in a filled buffer */ -+ if (bh->state == BUF_STATE_FULL) { -+ smp_rmb(); -+ bh->state = BUF_STATE_EMPTY; -+ fsg->next_buffhd_to_drain = bh->next; -+ -+ /* A short packet or an error ends everything */ -+ if (bh->outreq->actual < bh->bulk_out_intended_length || -+ bh->outreq->status != 0) { -+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); -+ return -EINTR; -+ } -+ continue; -+ } -+ -+ /* Try to submit another request if we need one */ -+ bh = fsg->next_buffhd_to_fill; -+ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) { -+ amount = min(fsg->usb_amount_left, -+ (u32) mod_data.buflen); -+ -+ /* Except at the end of the transfer, amount will be -+ * equal to the buffer size, which is divisible by -+ * the bulk-out maxpacket size. -+ */ -+ set_bulk_out_req_length(fsg, bh, amount); -+ start_transfer(fsg, fsg->bulk_out, bh->outreq, -+ &bh->outreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ fsg->usb_amount_left -= amount; -+ continue; -+ } -+ -+ /* Otherwise wait for something to happen */ -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ return 0; -+} -+ -+ -+static int finish_reply(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; -+ int rc = 0; -+ -+ switch (fsg->data_dir) { -+ case DATA_DIR_NONE: -+ break; // Nothing to send -+ -+ /* If we don't know whether the host wants to read or write, -+ * this must be CB or CBI with an unknown command. We mustn't -+ * try to send or receive any data. So stall both bulk pipes -+ * if we can and wait for a reset. */ -+ case DATA_DIR_UNKNOWN: -+ if (mod_data.can_stall) { -+ fsg_set_halt(fsg, fsg->bulk_out); -+ rc = halt_bulk_in_endpoint(fsg); -+ } -+ break; -+ -+ /* All but the last buffer of data must have already been sent */ -+ case DATA_DIR_TO_HOST: -+ if (fsg->data_size == 0) -+ ; // Nothing to send -+ -+ /* If there's no residue, simply send the last buffer */ -+ else if (fsg->residue == 0) { -+ bh->inreq->zero = 0; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ } -+ -+ /* There is a residue. For CB and CBI, simply mark the end -+ * of the data with a short packet. However, if we are -+ * allowed to stall, there was no data at all (residue == -+ * data_size), and the command failed (invalid LUN or -+ * sense data is set), then halt the bulk-in endpoint -+ * instead. */ -+ else if (!transport_is_bbb()) { -+ if (mod_data.can_stall && -+ fsg->residue == fsg->data_size && -+ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) { -+ bh->state = BUF_STATE_EMPTY; -+ rc = halt_bulk_in_endpoint(fsg); -+ } else { -+ bh->inreq->zero = 1; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ } -+ } -+ -+ /* -+ * For Bulk-only, mark the end of the data with a short -+ * packet. If we are allowed to stall, halt the bulk-in -+ * endpoint. (Note: This violates the Bulk-Only Transport -+ * specification, which requires us to pad the data if we -+ * don't halt the endpoint. Presumably nobody will mind.) -+ */ -+ else { -+ bh->inreq->zero = 1; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ fsg->next_buffhd_to_fill = bh->next; -+ if (mod_data.can_stall) -+ rc = halt_bulk_in_endpoint(fsg); -+ } -+ break; -+ -+ /* We have processed all we want from the data the host has sent. -+ * There may still be outstanding bulk-out requests. */ -+ case DATA_DIR_FROM_HOST: -+ if (fsg->residue == 0) -+ ; // Nothing to receive -+ -+ /* Did the host stop sending unexpectedly early? */ -+ else if (fsg->short_packet_received) { -+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); -+ rc = -EINTR; -+ } -+ -+ /* We haven't processed all the incoming data. Even though -+ * we may be allowed to stall, doing so would cause a race. -+ * The controller may already have ACK'ed all the remaining -+ * bulk-out packets, in which case the host wouldn't see a -+ * STALL. Not realizing the endpoint was halted, it wouldn't -+ * clear the halt -- leading to problems later on. */ -+#if 0 -+ else if (mod_data.can_stall) { -+ fsg_set_halt(fsg, fsg->bulk_out); -+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT); -+ rc = -EINTR; -+ } -+#endif -+ -+ /* We can't stall. Read in the excess data and throw it -+ * all away. */ -+ else -+ rc = throw_away_data(fsg); -+ break; -+ } -+ return rc; -+} -+ -+ -+static int send_status(struct fsg_dev *fsg) -+{ -+ struct fsg_lun *curlun = fsg->curlun; -+ struct fsg_buffhd *bh; -+ int rc; -+ u8 status = US_BULK_STAT_OK; -+ u32 sd, sdinfo = 0; -+ -+ /* Wait for the next buffer to become available */ -+ bh = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ if (curlun) { -+ sd = curlun->sense_data; -+ sdinfo = curlun->sense_data_info; -+ } else if (fsg->bad_lun_okay) -+ sd = SS_NO_SENSE; -+ else -+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; -+ -+ if (fsg->phase_error) { -+ DBG(fsg, "sending phase-error status\n"); -+ status = US_BULK_STAT_PHASE; -+ sd = SS_INVALID_COMMAND; -+ } else if (sd != SS_NO_SENSE) { -+ DBG(fsg, "sending command-failure status\n"); -+ status = US_BULK_STAT_FAIL; -+ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;" -+ " info x%x\n", -+ SK(sd), ASC(sd), ASCQ(sd), sdinfo); -+ } -+ -+ if (transport_is_bbb()) { -+ struct bulk_cs_wrap *csw = bh->buf; -+ -+ /* Store and send the Bulk-only CSW */ -+ csw->Signature = cpu_to_le32(US_BULK_CS_SIGN); -+ csw->Tag = fsg->tag; -+ csw->Residue = cpu_to_le32(fsg->residue); -+ csw->Status = status; -+ -+ bh->inreq->length = US_BULK_CS_WRAP_LEN; -+ bh->inreq->zero = 0; -+ start_transfer(fsg, fsg->bulk_in, bh->inreq, -+ &bh->inreq_busy, &bh->state); -+ -+ } else if (mod_data.transport_type == USB_PR_CB) { -+ -+ /* Control-Bulk transport has no status phase! */ -+ return 0; -+ -+ } else { // USB_PR_CBI -+ struct interrupt_data *buf = bh->buf; -+ -+ /* Store and send the Interrupt data. UFI sends the ASC -+ * and ASCQ bytes. Everything else sends a Type (which -+ * is always 0) and the status Value. */ -+ if (mod_data.protocol_type == USB_SC_UFI) { -+ buf->bType = ASC(sd); -+ buf->bValue = ASCQ(sd); -+ } else { -+ buf->bType = 0; -+ buf->bValue = status; -+ } -+ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN; -+ -+ fsg->intr_buffhd = bh; // Point to the right buffhd -+ fsg->intreq->buf = bh->inreq->buf; -+ fsg->intreq->context = bh; -+ start_transfer(fsg, fsg->intr_in, fsg->intreq, -+ &fsg->intreq_busy, &bh->state); -+ } -+ -+ fsg->next_buffhd_to_fill = bh->next; -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Check whether the command is properly formed and whether its data size -+ * and direction agree with the values we already have. */ -+static int check_command(struct fsg_dev *fsg, int cmnd_size, -+ enum data_direction data_dir, unsigned int mask, -+ int needs_medium, const char *name) -+{ -+ int i; -+ int lun = fsg->cmnd[1] >> 5; -+ static const char dirletter[4] = {'u', 'o', 'i', 'n'}; -+ char hdlen[20]; -+ struct fsg_lun *curlun; -+ -+ /* Adjust the expected cmnd_size for protocol encapsulation padding. -+ * Transparent SCSI doesn't pad. */ -+ if (protocol_is_scsi()) -+ ; -+ -+ /* There's some disagreement as to whether RBC pads commands or not. -+ * We'll play it safe and accept either form. */ -+ else if (mod_data.protocol_type == USB_SC_RBC) { -+ if (fsg->cmnd_size == 12) -+ cmnd_size = 12; -+ -+ /* All the other protocols pad to 12 bytes */ -+ } else -+ cmnd_size = 12; -+ -+ hdlen[0] = 0; -+ if (fsg->data_dir != DATA_DIR_UNKNOWN) -+ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir], -+ fsg->data_size); -+ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n", -+ name, cmnd_size, dirletter[(int) data_dir], -+ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen); -+ -+ /* We can't reply at all until we know the correct data direction -+ * and size. */ -+ if (fsg->data_size_from_cmnd == 0) -+ data_dir = DATA_DIR_NONE; -+ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI -+ fsg->data_dir = data_dir; -+ fsg->data_size = fsg->data_size_from_cmnd; -+ -+ } else { // Bulk-only -+ if (fsg->data_size < fsg->data_size_from_cmnd) { -+ -+ /* Host data size < Device data size is a phase error. -+ * Carry out the command, but only transfer as much -+ * as we are allowed. */ -+ fsg->data_size_from_cmnd = fsg->data_size; -+ fsg->phase_error = 1; -+ } -+ } -+ fsg->residue = fsg->usb_amount_left = fsg->data_size; -+ -+ /* Conflicting data directions is a phase error */ -+ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) { -+ fsg->phase_error = 1; -+ return -EINVAL; -+ } -+ -+ /* Verify the length of the command itself */ -+ if (cmnd_size != fsg->cmnd_size) { -+ -+ /* Special case workaround: There are plenty of buggy SCSI -+ * implementations. Many have issues with cbw->Length -+ * field passing a wrong command size. For those cases we -+ * always try to work around the problem by using the length -+ * sent by the host side provided it is at least as large -+ * as the correct command length. -+ * Examples of such cases would be MS-Windows, which issues -+ * REQUEST SENSE with cbw->Length == 12 where it should -+ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and -+ * REQUEST SENSE with cbw->Length == 10 where it should -+ * be 6 as well. -+ */ -+ if (cmnd_size <= fsg->cmnd_size) { -+ DBG(fsg, "%s is buggy! Expected length %d " -+ "but we got %d\n", name, -+ cmnd_size, fsg->cmnd_size); -+ cmnd_size = fsg->cmnd_size; -+ } else { -+ fsg->phase_error = 1; -+ return -EINVAL; -+ } -+ } -+ -+ /* Check that the LUN values are consistent */ -+ if (transport_is_bbb()) { -+ if (fsg->lun != lun) -+ DBG(fsg, "using LUN %d from CBW, " -+ "not LUN %d from CDB\n", -+ fsg->lun, lun); -+ } -+ -+ /* Check the LUN */ -+ curlun = fsg->curlun; -+ if (curlun) { -+ if (fsg->cmnd[0] != REQUEST_SENSE) { -+ curlun->sense_data = SS_NO_SENSE; -+ curlun->sense_data_info = 0; -+ curlun->info_valid = 0; -+ } -+ } else { -+ fsg->bad_lun_okay = 0; -+ -+ /* INQUIRY and REQUEST SENSE commands are explicitly allowed -+ * to use unsupported LUNs; all others may not. */ -+ if (fsg->cmnd[0] != INQUIRY && -+ fsg->cmnd[0] != REQUEST_SENSE) { -+ DBG(fsg, "unsupported LUN %d\n", fsg->lun); -+ return -EINVAL; -+ } -+ } -+ -+ /* If a unit attention condition exists, only INQUIRY and -+ * REQUEST SENSE commands are allowed; anything else must fail. */ -+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE && -+ fsg->cmnd[0] != INQUIRY && -+ fsg->cmnd[0] != REQUEST_SENSE) { -+ curlun->sense_data = curlun->unit_attention_data; -+ curlun->unit_attention_data = SS_NO_SENSE; -+ return -EINVAL; -+ } -+ -+ /* Check that only command bytes listed in the mask are non-zero */ -+ fsg->cmnd[1] &= 0x1f; // Mask away the LUN -+ for (i = 1; i < cmnd_size; ++i) { -+ if (fsg->cmnd[i] && !(mask & (1 << i))) { -+ if (curlun) -+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB; -+ return -EINVAL; -+ } -+ } -+ -+ /* If the medium isn't mounted and the command needs to access -+ * it, return an error. */ -+ if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { -+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT; -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* wrapper of check_command for data size in blocks handling */ -+static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size, -+ enum data_direction data_dir, unsigned int mask, -+ int needs_medium, const char *name) -+{ -+ if (fsg->curlun) -+ fsg->data_size_from_cmnd <<= fsg->curlun->blkbits; -+ return check_command(fsg, cmnd_size, data_dir, -+ mask, needs_medium, name); -+} -+ -+static int do_scsi_command(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh; -+ int rc; -+ int reply = -EINVAL; -+ int i; -+ static char unknown[16]; -+ -+ dump_cdb(fsg); -+ -+ /* Wait for the next buffer to become available for data or status */ -+ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ fsg->phase_error = 0; -+ fsg->short_packet_received = 0; -+ -+ down_read(&fsg->filesem); // We're using the backing file -+ switch (fsg->cmnd[0]) { -+ -+ case INQUIRY: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, -+ (1<<4), 0, -+ "INQUIRY")) == 0) -+ reply = do_inquiry(fsg, bh); -+ break; -+ -+ case MODE_SELECT: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST, -+ (1<<1) | (1<<4), 0, -+ "MODE SELECT(6)")) == 0) -+ reply = do_mode_select(fsg, bh); -+ break; -+ -+ case MODE_SELECT_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST, -+ (1<<1) | (3<<7), 0, -+ "MODE SELECT(10)")) == 0) -+ reply = do_mode_select(fsg, bh); -+ break; -+ -+ case MODE_SENSE: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, -+ (1<<1) | (1<<2) | (1<<4), 0, -+ "MODE SENSE(6)")) == 0) -+ reply = do_mode_sense(fsg, bh); -+ break; -+ -+ case MODE_SENSE_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (1<<1) | (1<<2) | (3<<7), 0, -+ "MODE SENSE(10)")) == 0) -+ reply = do_mode_sense(fsg, bh); -+ break; -+ -+ case ALLOW_MEDIUM_REMOVAL: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, -+ (1<<4), 0, -+ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0) -+ reply = do_prevent_allow(fsg); -+ break; -+ -+ case READ_6: -+ i = fsg->cmnd[4]; -+ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; -+ if ((reply = check_command_size_in_blocks(fsg, 6, -+ DATA_DIR_TO_HOST, -+ (7<<1) | (1<<4), 1, -+ "READ(6)")) == 0) -+ reply = do_read(fsg); -+ break; -+ -+ case READ_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command_size_in_blocks(fsg, 10, -+ DATA_DIR_TO_HOST, -+ (1<<1) | (0xf<<2) | (3<<7), 1, -+ "READ(10)")) == 0) -+ reply = do_read(fsg); -+ break; -+ -+ case READ_12: -+ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); -+ if ((reply = check_command_size_in_blocks(fsg, 12, -+ DATA_DIR_TO_HOST, -+ (1<<1) | (0xf<<2) | (0xf<<6), 1, -+ "READ(12)")) == 0) -+ reply = do_read(fsg); -+ break; -+ -+ case READ_CAPACITY: -+ fsg->data_size_from_cmnd = 8; -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (0xf<<2) | (1<<8), 1, -+ "READ CAPACITY")) == 0) -+ reply = do_read_capacity(fsg, bh); -+ break; -+ -+ case READ_HEADER: -+ if (!mod_data.cdrom) -+ goto unknown_cmnd; -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (3<<7) | (0x1f<<1), 1, -+ "READ HEADER")) == 0) -+ reply = do_read_header(fsg, bh); -+ break; -+ -+ case READ_TOC: -+ if (!mod_data.cdrom) -+ goto unknown_cmnd; -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (7<<6) | (1<<1), 1, -+ "READ TOC")) == 0) -+ reply = do_read_toc(fsg, bh); -+ break; -+ -+ case READ_FORMAT_CAPACITIES: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST, -+ (3<<7), 1, -+ "READ FORMAT CAPACITIES")) == 0) -+ reply = do_read_format_capacities(fsg, bh); -+ break; -+ -+ case REQUEST_SENSE: -+ fsg->data_size_from_cmnd = fsg->cmnd[4]; -+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST, -+ (1<<4), 0, -+ "REQUEST SENSE")) == 0) -+ reply = do_request_sense(fsg, bh); -+ break; -+ -+ case START_STOP: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE, -+ (1<<1) | (1<<4), 0, -+ "START-STOP UNIT")) == 0) -+ reply = do_start_stop(fsg); -+ break; -+ -+ case SYNCHRONIZE_CACHE: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, -+ (0xf<<2) | (3<<7), 1, -+ "SYNCHRONIZE CACHE")) == 0) -+ reply = do_synchronize_cache(fsg); -+ break; -+ -+ case TEST_UNIT_READY: -+ fsg->data_size_from_cmnd = 0; -+ reply = check_command(fsg, 6, DATA_DIR_NONE, -+ 0, 1, -+ "TEST UNIT READY"); -+ break; -+ -+ /* Although optional, this command is used by MS-Windows. We -+ * support a minimal version: BytChk must be 0. */ -+ case VERIFY: -+ fsg->data_size_from_cmnd = 0; -+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE, -+ (1<<1) | (0xf<<2) | (3<<7), 1, -+ "VERIFY")) == 0) -+ reply = do_verify(fsg); -+ break; -+ -+ case WRITE_6: -+ i = fsg->cmnd[4]; -+ fsg->data_size_from_cmnd = (i == 0) ? 256 : i; -+ if ((reply = check_command_size_in_blocks(fsg, 6, -+ DATA_DIR_FROM_HOST, -+ (7<<1) | (1<<4), 1, -+ "WRITE(6)")) == 0) -+ reply = do_write(fsg); -+ break; -+ -+ case WRITE_10: -+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]); -+ if ((reply = check_command_size_in_blocks(fsg, 10, -+ DATA_DIR_FROM_HOST, -+ (1<<1) | (0xf<<2) | (3<<7), 1, -+ "WRITE(10)")) == 0) -+ reply = do_write(fsg); -+ break; -+ -+ case WRITE_12: -+ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]); -+ if ((reply = check_command_size_in_blocks(fsg, 12, -+ DATA_DIR_FROM_HOST, -+ (1<<1) | (0xf<<2) | (0xf<<6), 1, -+ "WRITE(12)")) == 0) -+ reply = do_write(fsg); -+ break; -+ -+ /* Some mandatory commands that we recognize but don't implement. -+ * They don't mean much in this setting. It's left as an exercise -+ * for anyone interested to implement RESERVE and RELEASE in terms -+ * of Posix locks. */ -+ case FORMAT_UNIT: -+ case RELEASE: -+ case RESERVE: -+ case SEND_DIAGNOSTIC: -+ // Fall through -+ -+ default: -+ unknown_cmnd: -+ fsg->data_size_from_cmnd = 0; -+ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); -+ if ((reply = check_command(fsg, fsg->cmnd_size, -+ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { -+ fsg->curlun->sense_data = SS_INVALID_COMMAND; -+ reply = -EINVAL; -+ } -+ break; -+ } -+ up_read(&fsg->filesem); -+ -+ if (reply == -EINTR || signal_pending(current)) -+ return -EINTR; -+ -+ /* Set up the single reply buffer for finish_reply() */ -+ if (reply == -EINVAL) -+ reply = 0; // Error reply length -+ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) { -+ reply = min((u32) reply, fsg->data_size_from_cmnd); -+ bh->inreq->length = reply; -+ bh->state = BUF_STATE_FULL; -+ fsg->residue -= reply; -+ } // Otherwise it's already set -+ -+ return 0; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) -+{ -+ struct usb_request *req = bh->outreq; -+ struct bulk_cb_wrap *cbw = req->buf; -+ -+ /* Was this a real packet? Should it be ignored? */ -+ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) -+ return -EINVAL; -+ -+ /* Is the CBW valid? */ -+ if (req->actual != US_BULK_CB_WRAP_LEN || -+ cbw->Signature != cpu_to_le32( -+ US_BULK_CB_SIGN)) { -+ DBG(fsg, "invalid CBW: len %u sig 0x%x\n", -+ req->actual, -+ le32_to_cpu(cbw->Signature)); -+ -+ /* The Bulk-only spec says we MUST stall the IN endpoint -+ * (6.6.1), so it's unavoidable. It also says we must -+ * retain this state until the next reset, but there's -+ * no way to tell the controller driver it should ignore -+ * Clear-Feature(HALT) requests. -+ * -+ * We aren't required to halt the OUT endpoint; instead -+ * we can simply accept and discard any data received -+ * until the next reset. */ -+ wedge_bulk_in_endpoint(fsg); -+ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); -+ return -EINVAL; -+ } -+ -+ /* Is the CBW meaningful? */ -+ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN || -+ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { -+ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " -+ "cmdlen %u\n", -+ cbw->Lun, cbw->Flags, cbw->Length); -+ -+ /* We can do anything we want here, so let's stall the -+ * bulk pipes if we are allowed to. */ -+ if (mod_data.can_stall) { -+ fsg_set_halt(fsg, fsg->bulk_out); -+ halt_bulk_in_endpoint(fsg); -+ } -+ return -EINVAL; -+ } -+ -+ /* Save the command for later */ -+ fsg->cmnd_size = cbw->Length; -+ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size); -+ if (cbw->Flags & US_BULK_FLAG_IN) -+ fsg->data_dir = DATA_DIR_TO_HOST; -+ else -+ fsg->data_dir = DATA_DIR_FROM_HOST; -+ fsg->data_size = le32_to_cpu(cbw->DataTransferLength); -+ if (fsg->data_size == 0) -+ fsg->data_dir = DATA_DIR_NONE; -+ fsg->lun = cbw->Lun; -+ fsg->tag = cbw->Tag; -+ return 0; -+} -+ -+ -+static int get_next_command(struct fsg_dev *fsg) -+{ -+ struct fsg_buffhd *bh; -+ int rc = 0; -+ -+ if (transport_is_bbb()) { -+ -+ /* Wait for the next buffer to become available */ -+ bh = fsg->next_buffhd_to_fill; -+ while (bh->state != BUF_STATE_EMPTY) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ /* Queue a request to read a Bulk-only CBW */ -+ set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN); -+ start_transfer(fsg, fsg->bulk_out, bh->outreq, -+ &bh->outreq_busy, &bh->state); -+ -+ /* We will drain the buffer in software, which means we -+ * can reuse it for the next filling. No need to advance -+ * next_buffhd_to_fill. */ -+ -+ /* Wait for the CBW to arrive */ -+ while (bh->state != BUF_STATE_FULL) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ smp_rmb(); -+ rc = received_cbw(fsg, bh); -+ bh->state = BUF_STATE_EMPTY; -+ -+ } else { // USB_PR_CB or USB_PR_CBI -+ -+ /* Wait for the next command to arrive */ -+ while (fsg->cbbuf_cmnd_size == 0) { -+ rc = sleep_thread(fsg); -+ if (rc) -+ return rc; -+ } -+ -+ /* Is the previous status interrupt request still busy? -+ * The host is allowed to skip reading the status, -+ * so we must cancel it. */ -+ if (fsg->intreq_busy) -+ usb_ep_dequeue(fsg->intr_in, fsg->intreq); -+ -+ /* Copy the command and mark the buffer empty */ -+ fsg->data_dir = DATA_DIR_UNKNOWN; -+ spin_lock_irq(&fsg->lock); -+ fsg->cmnd_size = fsg->cbbuf_cmnd_size; -+ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size); -+ fsg->cbbuf_cmnd_size = 0; -+ spin_unlock_irq(&fsg->lock); -+ -+ /* Use LUN from the command */ -+ fsg->lun = fsg->cmnd[1] >> 5; -+ } -+ -+ /* Update current lun */ -+ if (fsg->lun >= 0 && fsg->lun < fsg->nluns) -+ fsg->curlun = &fsg->luns[fsg->lun]; -+ else -+ fsg->curlun = NULL; -+ -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep, -+ const struct usb_endpoint_descriptor *d) -+{ -+ int rc; -+ -+ ep->driver_data = fsg; -+ ep->desc = d; -+ rc = usb_ep_enable(ep); -+ if (rc) -+ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc); -+ return rc; -+} -+ -+static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep, -+ struct usb_request **preq) -+{ -+ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC); -+ if (*preq) -+ return 0; -+ ERROR(fsg, "can't allocate request for %s\n", ep->name); -+ return -ENOMEM; -+} -+ -+/* -+ * Reset interface setting and re-init endpoint state (toggle etc). -+ * Call with altsetting < 0 to disable the interface. The only other -+ * available altsetting is 0, which enables the interface. -+ */ -+static int do_set_interface(struct fsg_dev *fsg, int altsetting) -+{ -+ int rc = 0; -+ int i; -+ const struct usb_endpoint_descriptor *d; -+ -+ if (fsg->running) -+ DBG(fsg, "reset interface\n"); -+ -+reset: -+ /* Deallocate the requests */ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ struct fsg_buffhd *bh = &fsg->buffhds[i]; -+ -+ if (bh->inreq) { -+ usb_ep_free_request(fsg->bulk_in, bh->inreq); -+ bh->inreq = NULL; -+ } -+ if (bh->outreq) { -+ usb_ep_free_request(fsg->bulk_out, bh->outreq); -+ bh->outreq = NULL; -+ } -+ } -+ if (fsg->intreq) { -+ usb_ep_free_request(fsg->intr_in, fsg->intreq); -+ fsg->intreq = NULL; -+ } -+ -+ /* Disable the endpoints */ -+ if (fsg->bulk_in_enabled) { -+ usb_ep_disable(fsg->bulk_in); -+ fsg->bulk_in_enabled = 0; -+ } -+ if (fsg->bulk_out_enabled) { -+ usb_ep_disable(fsg->bulk_out); -+ fsg->bulk_out_enabled = 0; -+ } -+ if (fsg->intr_in_enabled) { -+ usb_ep_disable(fsg->intr_in); -+ fsg->intr_in_enabled = 0; -+ } -+ -+ fsg->running = 0; -+ if (altsetting < 0 || rc != 0) -+ return rc; -+ -+ DBG(fsg, "set interface %d\n", altsetting); -+ -+ /* Enable the endpoints */ -+ d = fsg_ep_desc(fsg->gadget, -+ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc, -+ &fsg_ss_bulk_in_desc); -+ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) -+ goto reset; -+ fsg->bulk_in_enabled = 1; -+ -+ d = fsg_ep_desc(fsg->gadget, -+ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc, -+ &fsg_ss_bulk_out_desc); -+ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) -+ goto reset; -+ fsg->bulk_out_enabled = 1; -+ fsg->bulk_out_maxpacket = usb_endpoint_maxp(d); -+ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); -+ -+ if (transport_is_cbi()) { -+ d = fsg_ep_desc(fsg->gadget, -+ &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc, -+ &fsg_ss_intr_in_desc); -+ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) -+ goto reset; -+ fsg->intr_in_enabled = 1; -+ } -+ -+ /* Allocate the requests */ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ struct fsg_buffhd *bh = &fsg->buffhds[i]; -+ -+ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) -+ goto reset; -+ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0) -+ goto reset; -+ bh->inreq->buf = bh->outreq->buf = bh->buf; -+ bh->inreq->context = bh->outreq->context = bh; -+ bh->inreq->complete = bulk_in_complete; -+ bh->outreq->complete = bulk_out_complete; -+ } -+ if (transport_is_cbi()) { -+ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0) -+ goto reset; -+ fsg->intreq->complete = intr_in_complete; -+ } -+ -+ fsg->running = 1; -+ for (i = 0; i < fsg->nluns; ++i) -+ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; -+ return rc; -+} -+ -+ -+/* -+ * Change our operational configuration. This code must agree with the code -+ * that returns config descriptors, and with interface altsetting code. -+ * -+ * It's also responsible for power management interactions. Some -+ * configurations might not work with our current power sources. -+ * For now we just assume the gadget is always self-powered. -+ */ -+static int do_set_config(struct fsg_dev *fsg, u8 new_config) -+{ -+ int rc = 0; -+ -+ /* Disable the single interface */ -+ if (fsg->config != 0) { -+ DBG(fsg, "reset config\n"); -+ fsg->config = 0; -+ rc = do_set_interface(fsg, -1); -+ } -+ -+ /* Enable the interface */ -+ if (new_config != 0) { -+ fsg->config = new_config; -+ if ((rc = do_set_interface(fsg, 0)) != 0) -+ fsg->config = 0; // Reset on errors -+ else -+ INFO(fsg, "%s config #%d\n", -+ usb_speed_string(fsg->gadget->speed), -+ fsg->config); -+ } -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void handle_exception(struct fsg_dev *fsg) -+{ -+ siginfo_t info; -+ int sig; -+ int i; -+ int num_active; -+ struct fsg_buffhd *bh; -+ enum fsg_state old_state; -+ u8 new_config; -+ struct fsg_lun *curlun; -+ unsigned int exception_req_tag; -+ int rc; -+ -+ /* Clear the existing signals. Anything but SIGUSR1 is converted -+ * into a high-priority EXIT exception. */ -+ for (;;) { -+ sig = dequeue_signal_lock(current, ¤t->blocked, &info); -+ if (!sig) -+ break; -+ if (sig != SIGUSR1) { -+ if (fsg->state < FSG_STATE_EXIT) -+ DBG(fsg, "Main thread exiting on signal\n"); -+ raise_exception(fsg, FSG_STATE_EXIT); -+ } -+ } -+ -+ /* Cancel all the pending transfers */ -+ if (fsg->intreq_busy) -+ usb_ep_dequeue(fsg->intr_in, fsg->intreq); -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ bh = &fsg->buffhds[i]; -+ if (bh->inreq_busy) -+ usb_ep_dequeue(fsg->bulk_in, bh->inreq); -+ if (bh->outreq_busy) -+ usb_ep_dequeue(fsg->bulk_out, bh->outreq); -+ } -+ -+ /* Wait until everything is idle */ -+ for (;;) { -+ num_active = fsg->intreq_busy; -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ bh = &fsg->buffhds[i]; -+ num_active += bh->inreq_busy + bh->outreq_busy; -+ } -+ if (num_active == 0) -+ break; -+ if (sleep_thread(fsg)) -+ return; -+ } -+ -+ /* Clear out the controller's fifos */ -+ if (fsg->bulk_in_enabled) -+ usb_ep_fifo_flush(fsg->bulk_in); -+ if (fsg->bulk_out_enabled) -+ usb_ep_fifo_flush(fsg->bulk_out); -+ if (fsg->intr_in_enabled) -+ usb_ep_fifo_flush(fsg->intr_in); -+ -+ /* Reset the I/O buffer states and pointers, the SCSI -+ * state, and the exception. Then invoke the handler. */ -+ spin_lock_irq(&fsg->lock); -+ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ bh = &fsg->buffhds[i]; -+ bh->state = BUF_STATE_EMPTY; -+ } -+ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain = -+ &fsg->buffhds[0]; -+ -+ exception_req_tag = fsg->exception_req_tag; -+ new_config = fsg->new_config; -+ old_state = fsg->state; -+ -+ if (old_state == FSG_STATE_ABORT_BULK_OUT) -+ fsg->state = FSG_STATE_STATUS_PHASE; -+ else { -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ curlun->prevent_medium_removal = 0; -+ curlun->sense_data = curlun->unit_attention_data = -+ SS_NO_SENSE; -+ curlun->sense_data_info = 0; -+ curlun->info_valid = 0; -+ } -+ fsg->state = FSG_STATE_IDLE; -+ } -+ spin_unlock_irq(&fsg->lock); -+ -+ /* Carry out any extra actions required for the exception */ -+ switch (old_state) { -+ default: -+ break; -+ -+ case FSG_STATE_ABORT_BULK_OUT: -+ send_status(fsg); -+ spin_lock_irq(&fsg->lock); -+ if (fsg->state == FSG_STATE_STATUS_PHASE) -+ fsg->state = FSG_STATE_IDLE; -+ spin_unlock_irq(&fsg->lock); -+ break; -+ -+ case FSG_STATE_RESET: -+ /* In case we were forced against our will to halt a -+ * bulk endpoint, clear the halt now. (The SuperH UDC -+ * requires this.) */ -+ if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) -+ usb_ep_clear_halt(fsg->bulk_in); -+ -+ if (transport_is_bbb()) { -+ if (fsg->ep0_req_tag == exception_req_tag) -+ ep0_queue(fsg); // Complete the status stage -+ -+ } else if (transport_is_cbi()) -+ send_status(fsg); // Status by interrupt pipe -+ -+ /* Technically this should go here, but it would only be -+ * a waste of time. Ditto for the INTERFACE_CHANGE and -+ * CONFIG_CHANGE cases. */ -+ // for (i = 0; i < fsg->nluns; ++i) -+ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED; -+ break; -+ -+ case FSG_STATE_INTERFACE_CHANGE: -+ rc = do_set_interface(fsg, 0); -+ if (fsg->ep0_req_tag != exception_req_tag) -+ break; -+ if (rc != 0) // STALL on errors -+ fsg_set_halt(fsg, fsg->ep0); -+ else // Complete the status stage -+ ep0_queue(fsg); -+ break; -+ -+ case FSG_STATE_CONFIG_CHANGE: -+ rc = do_set_config(fsg, new_config); -+ if (fsg->ep0_req_tag != exception_req_tag) -+ break; -+ if (rc != 0) // STALL on errors -+ fsg_set_halt(fsg, fsg->ep0); -+ else // Complete the status stage -+ ep0_queue(fsg); -+ break; -+ -+ case FSG_STATE_DISCONNECT: -+ for (i = 0; i < fsg->nluns; ++i) -+ fsg_lun_fsync_sub(fsg->luns + i); -+ do_set_config(fsg, 0); // Unconfigured state -+ break; -+ -+ case FSG_STATE_EXIT: -+ case FSG_STATE_TERMINATED: -+ do_set_config(fsg, 0); // Free resources -+ spin_lock_irq(&fsg->lock); -+ fsg->state = FSG_STATE_TERMINATED; // Stop the thread -+ spin_unlock_irq(&fsg->lock); -+ break; -+ } -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static int fsg_main_thread(void *fsg_) -+{ -+ struct fsg_dev *fsg = fsg_; -+ -+ /* Allow the thread to be killed by a signal, but set the signal mask -+ * to block everything but INT, TERM, KILL, and USR1. */ -+ allow_signal(SIGINT); -+ allow_signal(SIGTERM); -+ allow_signal(SIGKILL); -+ allow_signal(SIGUSR1); -+ -+ /* Allow the thread to be frozen */ -+ set_freezable(); -+ -+ /* Arrange for userspace references to be interpreted as kernel -+ * pointers. That way we can pass a kernel pointer to a routine -+ * that expects a __user pointer and it will work okay. */ -+ set_fs(get_ds()); -+ -+ /* The main loop */ -+ while (fsg->state != FSG_STATE_TERMINATED) { -+ if (exception_in_progress(fsg) || signal_pending(current)) { -+ handle_exception(fsg); -+ continue; -+ } -+ -+ if (!fsg->running) { -+ sleep_thread(fsg); -+ continue; -+ } -+ -+ if (get_next_command(fsg)) -+ continue; -+ -+ spin_lock_irq(&fsg->lock); -+ if (!exception_in_progress(fsg)) -+ fsg->state = FSG_STATE_DATA_PHASE; -+ spin_unlock_irq(&fsg->lock); -+ -+ if (do_scsi_command(fsg) || finish_reply(fsg)) -+ continue; -+ -+ spin_lock_irq(&fsg->lock); -+ if (!exception_in_progress(fsg)) -+ fsg->state = FSG_STATE_STATUS_PHASE; -+ spin_unlock_irq(&fsg->lock); -+ -+ if (send_status(fsg)) -+ continue; -+ -+ spin_lock_irq(&fsg->lock); -+ if (!exception_in_progress(fsg)) -+ fsg->state = FSG_STATE_IDLE; -+ spin_unlock_irq(&fsg->lock); -+ } -+ -+ spin_lock_irq(&fsg->lock); -+ fsg->thread_task = NULL; -+ spin_unlock_irq(&fsg->lock); -+ -+ /* If we are exiting because of a signal, unregister the -+ * gadget driver. */ -+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) -+ usb_gadget_unregister_driver(&fsg_driver); -+ -+ /* Let the unbind and cleanup routines know the thread has exited */ -+ complete_and_exit(&fsg->thread_notifier, 0); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+ -+/* The write permissions and store_xxx pointers are set in fsg_bind() */ -+static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); -+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL); -+static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void fsg_release(struct kref *ref) -+{ -+ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref); -+ -+ kfree(fsg->luns); -+ kfree(fsg); -+} -+ -+static void lun_release(struct device *dev) -+{ -+ struct rw_semaphore *filesem = dev_get_drvdata(dev); -+ struct fsg_dev *fsg = -+ container_of(filesem, struct fsg_dev, filesem); -+ -+ kref_put(&fsg->ref, fsg_release); -+} -+ -+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ int i; -+ struct fsg_lun *curlun; -+ struct usb_request *req = fsg->ep0req; -+ -+ DBG(fsg, "unbind\n"); -+ clear_bit(REGISTERED, &fsg->atomic_bitflags); -+ -+ /* If the thread isn't already dead, tell it to exit now */ -+ if (fsg->state != FSG_STATE_TERMINATED) { -+ raise_exception(fsg, FSG_STATE_EXIT); -+ wait_for_completion(&fsg->thread_notifier); -+ -+ /* The cleanup routine waits for this completion also */ -+ complete(&fsg->thread_notifier); -+ } -+ -+ /* Unregister the sysfs attribute files and the LUNs */ -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ if (curlun->registered) { -+ device_remove_file(&curlun->dev, &dev_attr_nofua); -+ device_remove_file(&curlun->dev, &dev_attr_ro); -+ device_remove_file(&curlun->dev, &dev_attr_file); -+ fsg_lun_close(curlun); -+ device_unregister(&curlun->dev); -+ curlun->registered = 0; -+ } -+ } -+ -+ /* Free the data buffers */ -+ for (i = 0; i < fsg_num_buffers; ++i) -+ kfree(fsg->buffhds[i].buf); -+ -+ /* Free the request and buffer for endpoint 0 */ -+ if (req) { -+ kfree(req->buf); -+ usb_ep_free_request(fsg->ep0, req); -+ } -+ -+ set_gadget_data(gadget, NULL); -+} -+ -+ -+static int __init check_parameters(struct fsg_dev *fsg) -+{ -+ int prot; -+ int gcnum; -+ -+ /* Store the default values */ -+ mod_data.transport_type = USB_PR_BULK; -+ mod_data.transport_name = "Bulk-only"; -+ mod_data.protocol_type = USB_SC_SCSI; -+ mod_data.protocol_name = "Transparent SCSI"; -+ -+ /* Some peripheral controllers are known not to be able to -+ * halt bulk endpoints correctly. If one of them is present, -+ * disable stalls. -+ */ -+ if (gadget_is_at91(fsg->gadget)) -+ mod_data.can_stall = 0; -+ -+ if (mod_data.release == 0xffff) { // Parameter wasn't set -+ gcnum = usb_gadget_controller_number(fsg->gadget); -+ if (gcnum >= 0) -+ mod_data.release = 0x0300 + gcnum; -+ else { -+ WARNING(fsg, "controller '%s' not recognized\n", -+ fsg->gadget->name); -+ mod_data.release = 0x0399; -+ } -+ } -+ -+ prot = simple_strtol(mod_data.protocol_parm, NULL, 0); -+ -+#ifdef CONFIG_USB_FILE_STORAGE_TEST -+ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) { -+ ; // Use default setting -+ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) { -+ mod_data.transport_type = USB_PR_CB; -+ mod_data.transport_name = "Control-Bulk"; -+ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) { -+ mod_data.transport_type = USB_PR_CBI; -+ mod_data.transport_name = "Control-Bulk-Interrupt"; -+ } else { -+ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm); -+ return -EINVAL; -+ } -+ -+ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 || -+ prot == USB_SC_SCSI) { -+ ; // Use default setting -+ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 || -+ prot == USB_SC_RBC) { -+ mod_data.protocol_type = USB_SC_RBC; -+ mod_data.protocol_name = "RBC"; -+ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 || -+ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 || -+ prot == USB_SC_8020) { -+ mod_data.protocol_type = USB_SC_8020; -+ mod_data.protocol_name = "8020i (ATAPI)"; -+ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 || -+ prot == USB_SC_QIC) { -+ mod_data.protocol_type = USB_SC_QIC; -+ mod_data.protocol_name = "QIC-157"; -+ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 || -+ prot == USB_SC_UFI) { -+ mod_data.protocol_type = USB_SC_UFI; -+ mod_data.protocol_name = "UFI"; -+ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 || -+ prot == USB_SC_8070) { -+ mod_data.protocol_type = USB_SC_8070; -+ mod_data.protocol_name = "8070i"; -+ } else { -+ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm); -+ return -EINVAL; -+ } -+ -+ mod_data.buflen &= PAGE_CACHE_MASK; -+ if (mod_data.buflen <= 0) { -+ ERROR(fsg, "invalid buflen\n"); -+ return -ETOOSMALL; -+ } -+ -+#endif /* CONFIG_USB_FILE_STORAGE_TEST */ -+ -+ /* Serial string handling. -+ * On a real device, the serial string would be loaded -+ * from permanent storage. */ -+ if (mod_data.serial) { -+ const char *ch; -+ unsigned len = 0; -+ -+ /* Sanity check : -+ * The CB[I] specification limits the serial string to -+ * 12 uppercase hexadecimal characters. -+ * BBB need at least 12 uppercase hexadecimal characters, -+ * with a maximum of 126. */ -+ for (ch = mod_data.serial; *ch; ++ch) { -+ ++len; -+ if ((*ch < '0' || *ch > '9') && -+ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */ -+ WARNING(fsg, -+ "Invalid serial string character: %c\n", -+ *ch); -+ goto no_serial; -+ } -+ } -+ if (len > 126 || -+ (mod_data.transport_type == USB_PR_BULK && len < 12) || -+ (mod_data.transport_type != USB_PR_BULK && len > 12)) { -+ WARNING(fsg, "Invalid serial string length!\n"); -+ goto no_serial; -+ } -+ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial; -+ } else { -+ WARNING(fsg, "No serial-number string provided!\n"); -+ no_serial: -+ device_desc.iSerialNumber = 0; -+ } -+ -+ return 0; -+} -+ -+ -+static int __init fsg_bind(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = the_fsg; -+ int rc; -+ int i; -+ struct fsg_lun *curlun; -+ struct usb_ep *ep; -+ struct usb_request *req; -+ char *pathbuf, *p; -+ -+ fsg->gadget = gadget; -+ set_gadget_data(gadget, fsg); -+ fsg->ep0 = gadget->ep0; -+ fsg->ep0->driver_data = fsg; -+ -+ if ((rc = check_parameters(fsg)) != 0) -+ goto out; -+ -+ if (mod_data.removable) { // Enable the store_xxx attributes -+ dev_attr_file.attr.mode = 0644; -+ dev_attr_file.store = fsg_store_file; -+ if (!mod_data.cdrom) { -+ dev_attr_ro.attr.mode = 0644; -+ dev_attr_ro.store = fsg_store_ro; -+ } -+ } -+ -+ /* Only for removable media? */ -+ dev_attr_nofua.attr.mode = 0644; -+ dev_attr_nofua.store = fsg_store_nofua; -+ -+ /* Find out how many LUNs there should be */ -+ i = mod_data.nluns; -+ if (i == 0) -+ i = max(mod_data.num_filenames, 1u); -+ if (i > FSG_MAX_LUNS) { -+ ERROR(fsg, "invalid number of LUNs: %d\n", i); -+ rc = -EINVAL; -+ goto out; -+ } -+ -+ /* Create the LUNs, open their backing files, and register the -+ * LUN devices in sysfs. */ -+ fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); -+ if (!fsg->luns) { -+ rc = -ENOMEM; -+ goto out; -+ } -+ fsg->nluns = i; -+ -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ curlun->cdrom = !!mod_data.cdrom; -+ curlun->ro = mod_data.cdrom || mod_data.ro[i]; -+ curlun->initially_ro = curlun->ro; -+ curlun->removable = mod_data.removable; -+ curlun->nofua = mod_data.nofua[i]; -+ curlun->dev.release = lun_release; -+ curlun->dev.parent = &gadget->dev; -+ curlun->dev.driver = &fsg_driver.driver; -+ dev_set_drvdata(&curlun->dev, &fsg->filesem); -+ dev_set_name(&curlun->dev,"%s-lun%d", -+ dev_name(&gadget->dev), i); -+ -+ kref_get(&fsg->ref); -+ rc = device_register(&curlun->dev); -+ if (rc) { -+ INFO(fsg, "failed to register LUN%d: %d\n", i, rc); -+ put_device(&curlun->dev); -+ goto out; -+ } -+ curlun->registered = 1; -+ -+ rc = device_create_file(&curlun->dev, &dev_attr_ro); -+ if (rc) -+ goto out; -+ rc = device_create_file(&curlun->dev, &dev_attr_nofua); -+ if (rc) -+ goto out; -+ rc = device_create_file(&curlun->dev, &dev_attr_file); -+ if (rc) -+ goto out; -+ -+ if (mod_data.file[i] && *mod_data.file[i]) { -+ rc = fsg_lun_open(curlun, mod_data.file[i]); -+ if (rc) -+ goto out; -+ } else if (!mod_data.removable) { -+ ERROR(fsg, "no file given for LUN%d\n", i); -+ rc = -EINVAL; -+ goto out; -+ } -+ } -+ -+ /* Find all the endpoints we will use */ -+ usb_ep_autoconfig_reset(gadget); -+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); -+ if (!ep) -+ goto autoconf_fail; -+ ep->driver_data = fsg; // claim the endpoint -+ fsg->bulk_in = ep; -+ -+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); -+ if (!ep) -+ goto autoconf_fail; -+ ep->driver_data = fsg; // claim the endpoint -+ fsg->bulk_out = ep; -+ -+ if (transport_is_cbi()) { -+ ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); -+ if (!ep) -+ goto autoconf_fail; -+ ep->driver_data = fsg; // claim the endpoint -+ fsg->intr_in = ep; -+ } -+ -+ /* Fix up the descriptors */ -+ device_desc.idVendor = cpu_to_le16(mod_data.vendor); -+ device_desc.idProduct = cpu_to_le16(mod_data.product); -+ device_desc.bcdDevice = cpu_to_le16(mod_data.release); -+ -+ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints -+ fsg_intf_desc.bNumEndpoints = i; -+ fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; -+ fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; -+ fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; -+ -+ if (gadget_is_dualspeed(gadget)) { -+ fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; -+ -+ /* Assume endpoint addresses are the same for both speeds */ -+ fsg_hs_bulk_in_desc.bEndpointAddress = -+ fsg_fs_bulk_in_desc.bEndpointAddress; -+ fsg_hs_bulk_out_desc.bEndpointAddress = -+ fsg_fs_bulk_out_desc.bEndpointAddress; -+ fsg_hs_intr_in_desc.bEndpointAddress = -+ fsg_fs_intr_in_desc.bEndpointAddress; -+ } -+ -+ if (gadget_is_superspeed(gadget)) { -+ unsigned max_burst; -+ -+ fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL; -+ -+ /* Calculate bMaxBurst, we know packet size is 1024 */ -+ max_burst = min_t(unsigned, mod_data.buflen / 1024, 15); -+ -+ /* Assume endpoint addresses are the same for both speeds */ -+ fsg_ss_bulk_in_desc.bEndpointAddress = -+ fsg_fs_bulk_in_desc.bEndpointAddress; -+ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst; -+ -+ fsg_ss_bulk_out_desc.bEndpointAddress = -+ fsg_fs_bulk_out_desc.bEndpointAddress; -+ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst; -+ } -+ -+ if (gadget_is_otg(gadget)) -+ fsg_otg_desc.bmAttributes |= USB_OTG_HNP; -+ -+ rc = -ENOMEM; -+ -+ /* Allocate the request and buffer for endpoint 0 */ -+ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL); -+ if (!req) -+ goto out; -+ req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL); -+ if (!req->buf) -+ goto out; -+ req->complete = ep0_complete; -+ -+ /* Allocate the data buffers */ -+ for (i = 0; i < fsg_num_buffers; ++i) { -+ struct fsg_buffhd *bh = &fsg->buffhds[i]; -+ -+ /* Allocate for the bulk-in endpoint. We assume that -+ * the buffer will also work with the bulk-out (and -+ * interrupt-in) endpoint. */ -+ bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL); -+ if (!bh->buf) -+ goto out; -+ bh->next = bh + 1; -+ } -+ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0]; -+ -+ /* This should reflect the actual gadget power source */ -+ usb_gadget_set_selfpowered(gadget); -+ -+ snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, -+ "%s %s with %s", -+ init_utsname()->sysname, init_utsname()->release, -+ gadget->name); -+ -+ fsg->thread_task = kthread_create(fsg_main_thread, fsg, -+ "file-storage-gadget"); -+ if (IS_ERR(fsg->thread_task)) { -+ rc = PTR_ERR(fsg->thread_task); -+ goto out; -+ } -+ -+ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n"); -+ INFO(fsg, "NOTE: This driver is deprecated. " -+ "Consider using g_mass_storage instead.\n"); -+ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns); -+ -+ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); -+ for (i = 0; i < fsg->nluns; ++i) { -+ curlun = &fsg->luns[i]; -+ if (fsg_lun_is_open(curlun)) { -+ p = NULL; -+ if (pathbuf) { -+ p = d_path(&curlun->filp->f_path, -+ pathbuf, PATH_MAX); -+ if (IS_ERR(p)) -+ p = NULL; -+ } -+ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n", -+ curlun->ro, curlun->nofua, (p ? p : "(error)")); -+ } -+ } -+ kfree(pathbuf); -+ -+ DBG(fsg, "transport=%s (x%02x)\n", -+ mod_data.transport_name, mod_data.transport_type); -+ DBG(fsg, "protocol=%s (x%02x)\n", -+ mod_data.protocol_name, mod_data.protocol_type); -+ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n", -+ mod_data.vendor, mod_data.product, mod_data.release); -+ DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n", -+ mod_data.removable, mod_data.can_stall, -+ mod_data.cdrom, mod_data.buflen); -+ DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task)); -+ -+ set_bit(REGISTERED, &fsg->atomic_bitflags); -+ -+ /* Tell the thread to start working */ -+ wake_up_process(fsg->thread_task); -+ return 0; -+ -+autoconf_fail: -+ ERROR(fsg, "unable to autoconfigure all endpoints\n"); -+ rc = -ENOTSUPP; -+ -+out: -+ fsg->state = FSG_STATE_TERMINATED; // The thread is dead -+ fsg_unbind(gadget); -+ complete(&fsg->thread_notifier); -+ return rc; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void fsg_suspend(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ -+ DBG(fsg, "suspend\n"); -+ set_bit(SUSPENDED, &fsg->atomic_bitflags); -+} -+ -+static void fsg_resume(struct usb_gadget *gadget) -+{ -+ struct fsg_dev *fsg = get_gadget_data(gadget); -+ -+ DBG(fsg, "resume\n"); -+ clear_bit(SUSPENDED, &fsg->atomic_bitflags); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static struct usb_gadget_driver fsg_driver = { -+ .max_speed = USB_SPEED_SUPER, -+ .function = (char *) fsg_string_product, -+ .unbind = fsg_unbind, -+ .disconnect = fsg_disconnect, -+ .setup = fsg_setup, -+ .suspend = fsg_suspend, -+ .resume = fsg_resume, -+ -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ // .release = ... -+ // .suspend = ... -+ // .resume = ... -+ }, -+}; -+ -+ -+static int __init fsg_alloc(void) -+{ -+ struct fsg_dev *fsg; -+ -+ fsg = kzalloc(sizeof *fsg + -+ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL); -+ -+ if (!fsg) -+ return -ENOMEM; -+ spin_lock_init(&fsg->lock); -+ init_rwsem(&fsg->filesem); -+ kref_init(&fsg->ref); -+ init_completion(&fsg->thread_notifier); -+ -+ the_fsg = fsg; -+ return 0; -+} -+ -+ -+static int __init fsg_init(void) -+{ -+ int rc; -+ struct fsg_dev *fsg; -+ -+ rc = fsg_num_buffers_validate(); -+ if (rc != 0) -+ return rc; -+ -+ if ((rc = fsg_alloc()) != 0) -+ return rc; -+ fsg = the_fsg; -+ if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0) -+ kref_put(&fsg->ref, fsg_release); -+ return rc; -+} -+module_init(fsg_init); -+ -+ -+static void __exit fsg_cleanup(void) -+{ -+ struct fsg_dev *fsg = the_fsg; -+ -+ /* Unregister the driver iff the thread hasn't already done so */ -+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) -+ usb_gadget_unregister_driver(&fsg_driver); -+ -+ /* Wait for the thread to finish up */ -+ wait_for_completion(&fsg->thread_notifier); -+ -+ kref_put(&fsg->ref, fsg_release); -+} -+module_exit(fsg_cleanup); ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -754,6 +754,19 @@ config USB_HWA_HCD - To compile this driver a module, choose M here: the module - will be called "hwa-hc". - -+config USB_DWCOTG -+ tristate "Synopsis DWC host support" -+ depends on USB -+ help -+ The Synopsis DWC controller is a dual-role -+ host/peripheral/OTG ("On The Go") USB controllers. -+ -+ Enable this option to support this IP in host controller mode. -+ If unsure, say N. -+ -+ To compile this driver as a module, choose M here: the -+ modules built will be called dwc_otg and dwc_common_port. -+ - config USB_IMX21_HCD - tristate "i.MX21 HCD support" - depends on ARM && ARCH_MXC ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -74,6 +74,8 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o - obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o -+ -+obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/ - obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o - obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o - obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/Makefile -@@ -0,0 +1,58 @@ -+# -+# Makefile for DWC_common library -+# -+ -+ifneq ($(KERNELRELEASE),) -+ -+ccflags-y += -DDWC_LINUX -+#ccflags-y += -DDEBUG -+#ccflags-y += -DDWC_DEBUG_REGS -+#ccflags-y += -DDWC_DEBUG_MEMORY -+ -+ccflags-y += -DDWC_LIBMODULE -+ccflags-y += -DDWC_CCLIB -+#ccflags-y += -DDWC_CRYPTOLIB -+ccflags-y += -DDWC_NOTIFYLIB -+ccflags-y += -DDWC_UTFLIB -+ -+obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o -+dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ -+ dwc_crypto.o dwc_notifier.o \ -+ dwc_common_linux.o dwc_mem.o -+ -+kernrelwd := $(subst ., ,$(KERNELRELEASE)) -+kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) -+ -+ifneq ($(kernrel3),2.6.20) -+# grayg - I only know that we use ccflags-y in 2.6.31 actually -+ccflags-y += $(CPPFLAGS) -+endif -+ -+else -+ -+#ifeq ($(KDIR),) -+#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) -+#endif -+ -+ifeq ($(ARCH),) -+$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \ -+ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") -+endif -+ -+ifeq ($(DOXYGEN),) -+DOXYGEN := doxygen -+endif -+ -+default: -+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ -+docs: $(wildcard *.[hc]) doc/doxygen.cfg -+ $(DOXYGEN) doc/doxygen.cfg -+ -+tags: $(wildcard *.[hc]) -+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) -+ -+endif -+ -+clean: -+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd -@@ -0,0 +1,17 @@ -+CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include -+CFLAGS += -DDWC_FREEBSD -+CFLAGS += -DDEBUG -+#CFLAGS += -DDWC_DEBUG_REGS -+#CFLAGS += -DDWC_DEBUG_MEMORY -+ -+#CFLAGS += -DDWC_LIBMODULE -+#CFLAGS += -DDWC_CCLIB -+#CFLAGS += -DDWC_CRYPTOLIB -+#CFLAGS += -DDWC_NOTIFYLIB -+#CFLAGS += -DDWC_UTFLIB -+ -+KMOD = dwc_common_port_lib -+SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \ -+ dwc_common_fbsd.c dwc_mem.c -+ -+.include <bsd.kmod.mk> ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/Makefile.linux -@@ -0,0 +1,49 @@ -+# -+# Makefile for DWC_common library -+# -+ifneq ($(KERNELRELEASE),) -+ -+ccflags-y += -DDWC_LINUX -+#ccflags-y += -DDEBUG -+#ccflags-y += -DDWC_DEBUG_REGS -+#ccflags-y += -DDWC_DEBUG_MEMORY -+ -+ccflags-y += -DDWC_LIBMODULE -+ccflags-y += -DDWC_CCLIB -+ccflags-y += -DDWC_CRYPTOLIB -+ccflags-y += -DDWC_NOTIFYLIB -+ccflags-y += -DDWC_UTFLIB -+ -+obj-m := dwc_common_port_lib.o -+dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \ -+ dwc_crypto.o dwc_notifier.o \ -+ dwc_common_linux.o dwc_mem.o -+ -+else -+ -+ifeq ($(KDIR),) -+$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment) -+endif -+ -+ifeq ($(ARCH),) -+$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \ -+ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-") -+endif -+ -+ifeq ($(DOXYGEN),) -+DOXYGEN := doxygen -+endif -+ -+default: -+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ -+docs: $(wildcard *.[hc]) doc/doxygen.cfg -+ $(DOXYGEN) doc/doxygen.cfg -+ -+tags: $(wildcard *.[hc]) -+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) -+ -+endif -+ -+clean: -+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/changes.txt -@@ -0,0 +1,174 @@ -+ -+dwc_read_reg32() and friends now take an additional parameter, a pointer to an -+IO context struct. The IO context struct should live in an os-dependent struct -+in your driver. As an example, the dwc_usb3 driver has an os-dependent struct -+named 'os_dep' embedded in the main device struct. So there these calls look -+like this: -+ -+ dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg); -+ -+ dwc_write_reg32(&usb3_dev->os_dep.ioctx, -+ &pcd->dev_global_regs->dcfg, 0); -+ -+Note that for the existing Linux driver ports, it is not necessary to actually -+define the 'ioctx' member in the os-dependent struct. Since Linux does not -+require an IO context, its macros for dwc_read_reg32() and friends do not -+use the context pointer, so it is optimized away by the compiler. But it is -+necessary to add the pointer parameter to all of the call sites, to be ready -+for any future ports (such as FreeBSD) which do require an IO context. -+ -+ -+Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now -+take an additional parameter, a pointer to a memory context. Examples: -+ -+ addr = dwc_alloc(&usb3_dev->os_dep.memctx, size); -+ -+ dwc_free(&usb3_dev->os_dep.memctx, addr); -+ -+Again, for the Linux ports, it is not necessary to actually define the memctx -+member, but it is necessary to add the pointer parameter to all of the call -+sites. -+ -+ -+Same for dwc_dma_alloc() and dwc_dma_free(). Examples: -+ -+ virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr); -+ -+ dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr); -+ -+ -+Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples: -+ -+ mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx); -+ -+ dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex); -+ -+ -+Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples: -+ -+ lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx); -+ -+ dwc_spinlock_free(&usb3_dev->osdep.splctx, lock); -+ -+ -+Same for dwc_timer_alloc(). Example: -+ -+ timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1", -+ cb_func, cb_data); -+ -+ -+Same for dwc_waitq_alloc(). Example: -+ -+ waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx); -+ -+ -+Same for dwc_thread_run(). Example: -+ -+ thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func, -+ "dwc_usb3_thd1", data); -+ -+ -+Same for dwc_workq_alloc(). Example: -+ -+ workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1"); -+ -+ -+Same for dwc_task_alloc(). Example: -+ -+ task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1", -+ cb_func, cb_data); -+ -+ -+In addition to the context pointer additions, a few core functions have had -+other changes made to their parameters: -+ -+The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore() -+has been changed from a uint64_t to a dwc_irqflags_t. -+ -+dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the -+FreeBSD equivalent of that function requires it. -+ -+And, in addition to the context pointer, dwc_task_alloc() also adds a -+'char *name' parameter, to be consistent with dwc_thread_run() and -+dwc_workq_alloc(), and because the FreeBSD equivalent of that function -+requires a unique name. -+ -+ -+Here is a complete list of the core functions that now take a pointer to a -+context as their first parameter: -+ -+ dwc_read_reg32 -+ dwc_read_reg64 -+ dwc_write_reg32 -+ dwc_write_reg64 -+ dwc_modify_reg32 -+ dwc_modify_reg64 -+ dwc_alloc -+ dwc_alloc_atomic -+ dwc_strdup -+ dwc_free -+ dwc_dma_alloc -+ dwc_dma_free -+ dwc_mutex_alloc -+ dwc_mutex_free -+ dwc_spinlock_alloc -+ dwc_spinlock_free -+ dwc_timer_alloc -+ dwc_waitq_alloc -+ dwc_thread_run -+ dwc_workq_alloc -+ dwc_task_alloc Also adds a 'char *name' as its 2nd parameter -+ -+And here are the core functions that have other changes to their parameters: -+ -+ dwc_spinlock_irqsave 'flags' param is now a 'dwc_irqflags_t *' -+ dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t' -+ dwc_thread_should_stop Adds a 'dwc_thread_t *' parameter -+ -+ -+ -+The changes to the core functions also require some of the other library -+functions to change: -+ -+ dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx' -+ (for memory allocation) as the 1st param and a 'void *mtxctx' -+ (for mutex allocation) as the 2nd param. -+ -+ dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(), -+ dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a -+ 'void *memctx' as the 1st param. -+ -+ dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a -+ 'void *memctx' as the 1st param. -+ -+ dwc_modpow() now takes a 'void *memctx' as the 1st param. -+ -+ dwc_alloc_notification_manager() now takes a 'void *memctx' as the -+ 1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd -+ param, and also now returns an integer value that is non-zero if -+ allocation of its data structures or work queue fails. -+ -+ dwc_register_notifier() now takes a 'void *memctx' as the 1st param. -+ -+ dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first -+ param, and also now returns an integer value that is non-zero if -+ allocation of its data structures fails. -+ -+ -+ -+Other miscellaneous changes: -+ -+The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to -+DWC_DEBUG_MEMORY and DWC_DEBUG_REGS. -+ -+The following #define's have been added to allow selectively compiling library -+features: -+ -+ DWC_CCLIB -+ DWC_CRYPTOLIB -+ DWC_NOTIFYLIB -+ DWC_UTFLIB -+ -+A DWC_LIBMODULE #define has also been added. If this is not defined, then the -+module code in dwc_common_linux.c is not compiled in. This allows linking the -+library code directly into a driver module, instead of as a standalone module. ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg -@@ -0,0 +1,270 @@ -+# Doxyfile 1.4.5 -+ -+#--------------------------------------------------------------------------- -+# Project related configuration options -+#--------------------------------------------------------------------------- -+PROJECT_NAME = "Synopsys DWC Portability and Common Library for UWB" -+PROJECT_NUMBER = -+OUTPUT_DIRECTORY = doc -+CREATE_SUBDIRS = NO -+OUTPUT_LANGUAGE = English -+BRIEF_MEMBER_DESC = YES -+REPEAT_BRIEF = YES -+ABBREVIATE_BRIEF = "The $name class" \ -+ "The $name widget" \ -+ "The $name file" \ -+ is \ -+ provides \ -+ specifies \ -+ contains \ -+ represents \ -+ a \ -+ an \ -+ the -+ALWAYS_DETAILED_SEC = YES -+INLINE_INHERITED_MEMB = NO -+FULL_PATH_NAMES = NO -+STRIP_FROM_PATH = .. -+STRIP_FROM_INC_PATH = -+SHORT_NAMES = NO -+JAVADOC_AUTOBRIEF = YES -+MULTILINE_CPP_IS_BRIEF = NO -+DETAILS_AT_TOP = YES -+INHERIT_DOCS = YES -+SEPARATE_MEMBER_PAGES = NO -+TAB_SIZE = 8 -+ALIASES = -+OPTIMIZE_OUTPUT_FOR_C = YES -+OPTIMIZE_OUTPUT_JAVA = NO -+BUILTIN_STL_SUPPORT = NO -+DISTRIBUTE_GROUP_DOC = NO -+SUBGROUPING = NO -+#--------------------------------------------------------------------------- -+# Build related configuration options -+#--------------------------------------------------------------------------- -+EXTRACT_ALL = NO -+EXTRACT_PRIVATE = NO -+EXTRACT_STATIC = YES -+EXTRACT_LOCAL_CLASSES = NO -+EXTRACT_LOCAL_METHODS = NO -+HIDE_UNDOC_MEMBERS = NO -+HIDE_UNDOC_CLASSES = NO -+HIDE_FRIEND_COMPOUNDS = NO -+HIDE_IN_BODY_DOCS = NO -+INTERNAL_DOCS = NO -+CASE_SENSE_NAMES = YES -+HIDE_SCOPE_NAMES = NO -+SHOW_INCLUDE_FILES = NO -+INLINE_INFO = YES -+SORT_MEMBER_DOCS = NO -+SORT_BRIEF_DOCS = NO -+SORT_BY_SCOPE_NAME = NO -+GENERATE_TODOLIST = YES -+GENERATE_TESTLIST = YES -+GENERATE_BUGLIST = YES -+GENERATE_DEPRECATEDLIST= YES -+ENABLED_SECTIONS = -+MAX_INITIALIZER_LINES = 30 -+SHOW_USED_FILES = YES -+SHOW_DIRECTORIES = YES -+FILE_VERSION_FILTER = -+#--------------------------------------------------------------------------- -+# configuration options related to warning and progress messages -+#--------------------------------------------------------------------------- -+QUIET = YES -+WARNINGS = YES -+WARN_IF_UNDOCUMENTED = NO -+WARN_IF_DOC_ERROR = YES -+WARN_NO_PARAMDOC = YES -+WARN_FORMAT = "$file:$line: $text" -+WARN_LOGFILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the input files -+#--------------------------------------------------------------------------- -+INPUT = . -+FILE_PATTERNS = *.c \ -+ *.cc \ -+ *.cxx \ -+ *.cpp \ -+ *.c++ \ -+ *.d \ -+ *.java \ -+ *.ii \ -+ *.ixx \ -+ *.ipp \ -+ *.i++ \ -+ *.inl \ -+ *.h \ -+ *.hh \ -+ *.hxx \ -+ *.hpp \ -+ *.h++ \ -+ *.idl \ -+ *.odl \ -+ *.cs \ -+ *.php \ -+ *.php3 \ -+ *.inc \ -+ *.m \ -+ *.mm \ -+ *.dox \ -+ *.py \ -+ *.C \ -+ *.CC \ -+ *.C++ \ -+ *.II \ -+ *.I++ \ -+ *.H \ -+ *.HH \ -+ *.H++ \ -+ *.CS \ -+ *.PHP \ -+ *.PHP3 \ -+ *.M \ -+ *.MM \ -+ *.PY -+RECURSIVE = NO -+EXCLUDE = -+EXCLUDE_SYMLINKS = NO -+EXCLUDE_PATTERNS = -+EXAMPLE_PATH = -+EXAMPLE_PATTERNS = * -+EXAMPLE_RECURSIVE = NO -+IMAGE_PATH = -+INPUT_FILTER = -+FILTER_PATTERNS = -+FILTER_SOURCE_FILES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to source browsing -+#--------------------------------------------------------------------------- -+SOURCE_BROWSER = NO -+INLINE_SOURCES = NO -+STRIP_CODE_COMMENTS = YES -+REFERENCED_BY_RELATION = YES -+REFERENCES_RELATION = YES -+USE_HTAGS = NO -+VERBATIM_HEADERS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the alphabetical class index -+#--------------------------------------------------------------------------- -+ALPHABETICAL_INDEX = NO -+COLS_IN_ALPHA_INDEX = 5 -+IGNORE_PREFIX = -+#--------------------------------------------------------------------------- -+# configuration options related to the HTML output -+#--------------------------------------------------------------------------- -+GENERATE_HTML = YES -+HTML_OUTPUT = html -+HTML_FILE_EXTENSION = .html -+HTML_HEADER = -+HTML_FOOTER = -+HTML_STYLESHEET = -+HTML_ALIGN_MEMBERS = YES -+GENERATE_HTMLHELP = NO -+CHM_FILE = -+HHC_LOCATION = -+GENERATE_CHI = NO -+BINARY_TOC = NO -+TOC_EXPAND = NO -+DISABLE_INDEX = NO -+ENUM_VALUES_PER_LINE = 4 -+GENERATE_TREEVIEW = YES -+TREEVIEW_WIDTH = 250 -+#--------------------------------------------------------------------------- -+# configuration options related to the LaTeX output -+#--------------------------------------------------------------------------- -+GENERATE_LATEX = NO -+LATEX_OUTPUT = latex -+LATEX_CMD_NAME = latex -+MAKEINDEX_CMD_NAME = makeindex -+COMPACT_LATEX = NO -+PAPER_TYPE = a4wide -+EXTRA_PACKAGES = -+LATEX_HEADER = -+PDF_HYPERLINKS = NO -+USE_PDFLATEX = NO -+LATEX_BATCHMODE = NO -+LATEX_HIDE_INDICES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the RTF output -+#--------------------------------------------------------------------------- -+GENERATE_RTF = NO -+RTF_OUTPUT = rtf -+COMPACT_RTF = NO -+RTF_HYPERLINKS = NO -+RTF_STYLESHEET_FILE = -+RTF_EXTENSIONS_FILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the man page output -+#--------------------------------------------------------------------------- -+GENERATE_MAN = NO -+MAN_OUTPUT = man -+MAN_EXTENSION = .3 -+MAN_LINKS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the XML output -+#--------------------------------------------------------------------------- -+GENERATE_XML = NO -+XML_OUTPUT = xml -+XML_SCHEMA = -+XML_DTD = -+XML_PROGRAMLISTING = YES -+#--------------------------------------------------------------------------- -+# configuration options for the AutoGen Definitions output -+#--------------------------------------------------------------------------- -+GENERATE_AUTOGEN_DEF = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the Perl module output -+#--------------------------------------------------------------------------- -+GENERATE_PERLMOD = NO -+PERLMOD_LATEX = NO -+PERLMOD_PRETTY = YES -+PERLMOD_MAKEVAR_PREFIX = -+#--------------------------------------------------------------------------- -+# Configuration options related to the preprocessor -+#--------------------------------------------------------------------------- -+ENABLE_PREPROCESSING = YES -+MACRO_EXPANSION = NO -+EXPAND_ONLY_PREDEF = NO -+SEARCH_INCLUDES = YES -+INCLUDE_PATH = -+INCLUDE_FILE_PATTERNS = -+PREDEFINED = DEBUG DEBUG_MEMORY -+EXPAND_AS_DEFINED = -+SKIP_FUNCTION_MACROS = YES -+#--------------------------------------------------------------------------- -+# Configuration::additions related to external references -+#--------------------------------------------------------------------------- -+TAGFILES = -+GENERATE_TAGFILE = -+ALLEXTERNALS = NO -+EXTERNAL_GROUPS = YES -+PERL_PATH = /usr/bin/perl -+#--------------------------------------------------------------------------- -+# Configuration options related to the dot tool -+#--------------------------------------------------------------------------- -+CLASS_DIAGRAMS = YES -+HIDE_UNDOC_RELATIONS = YES -+HAVE_DOT = NO -+CLASS_GRAPH = YES -+COLLABORATION_GRAPH = YES -+GROUP_GRAPHS = YES -+UML_LOOK = NO -+TEMPLATE_RELATIONS = NO -+INCLUDE_GRAPH = NO -+INCLUDED_BY_GRAPH = YES -+CALL_GRAPH = NO -+GRAPHICAL_HIERARCHY = YES -+DIRECTORY_GRAPH = YES -+DOT_IMAGE_FORMAT = png -+DOT_PATH = -+DOTFILE_DIRS = -+MAX_DOT_GRAPH_DEPTH = 1000 -+DOT_TRANSPARENT = NO -+DOT_MULTI_TARGETS = NO -+GENERATE_LEGEND = YES -+DOT_CLEANUP = YES -+#--------------------------------------------------------------------------- -+# Configuration::additions related to the search engine -+#--------------------------------------------------------------------------- -+SEARCHENGINE = NO ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_cc.c -@@ -0,0 +1,532 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $ -+ * $Revision: #4 $ -+ * $Date: 2010/11/04 $ -+ * $Change: 1621692 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifdef DWC_CCLIB -+ -+#include "dwc_cc.h" -+ -+typedef struct dwc_cc -+{ -+ uint32_t uid; -+ uint8_t chid[16]; -+ uint8_t cdid[16]; -+ uint8_t ck[16]; -+ uint8_t *name; -+ uint8_t length; -+ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry; -+} dwc_cc_t; -+ -+DWC_CIRCLEQ_HEAD(context_list, dwc_cc); -+ -+/** The main structure for CC management. */ -+struct dwc_cc_if -+{ -+ dwc_mutex_t *mutex; -+ char *filename; -+ -+ unsigned is_host:1; -+ -+ dwc_notifier_t *notifier; -+ -+ struct context_list list; -+}; -+ -+#ifdef DEBUG -+static inline void dump_bytes(char *name, uint8_t *bytes, int len) -+{ -+ int i; -+ DWC_PRINTF("%s: ", name); -+ for (i=0; i<len; i++) { -+ DWC_PRINTF("%02x ", bytes[i]); -+ } -+ DWC_PRINTF("\n"); -+} -+#else -+#define dump_bytes(x...) -+#endif -+ -+static dwc_cc_t *alloc_cc(void *mem_ctx, uint8_t *name, uint32_t length) -+{ -+ dwc_cc_t *cc = dwc_alloc(mem_ctx, sizeof(dwc_cc_t)); -+ if (!cc) { -+ return NULL; -+ } -+ DWC_MEMSET(cc, 0, sizeof(dwc_cc_t)); -+ -+ if (name) { -+ cc->length = length; -+ cc->name = dwc_alloc(mem_ctx, length); -+ if (!cc->name) { -+ dwc_free(mem_ctx, cc); -+ return NULL; -+ } -+ -+ DWC_MEMCPY(cc->name, name, length); -+ } -+ -+ return cc; -+} -+ -+static void free_cc(void *mem_ctx, dwc_cc_t *cc) -+{ -+ if (cc->name) { -+ dwc_free(mem_ctx, cc->name); -+ } -+ dwc_free(mem_ctx, cc); -+} -+ -+static uint32_t next_uid(dwc_cc_if_t *cc_if) -+{ -+ uint32_t uid = 0; -+ dwc_cc_t *cc; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (cc->uid > uid) { -+ uid = cc->uid; -+ } -+ } -+ -+ if (uid == 0) { -+ uid = 255; -+ } -+ -+ return uid + 1; -+} -+ -+static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid) -+{ -+ dwc_cc_t *cc; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (cc->uid == uid) { -+ return cc; -+ } -+ } -+ return NULL; -+} -+ -+static unsigned int cc_data_size(dwc_cc_if_t *cc_if) -+{ -+ unsigned int size = 0; -+ dwc_cc_t *cc; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ size += (48 + 1); -+ if (cc->name) { -+ size += cc->length; -+ } -+ } -+ return size; -+} -+ -+static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) -+{ -+ uint32_t uid = 0; -+ dwc_cc_t *cc; -+ -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) { -+ uid = cc->uid; -+ break; -+ } -+ } -+ return uid; -+} -+static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) -+{ -+ uint32_t uid = 0; -+ dwc_cc_t *cc; -+ -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) { -+ uid = cc->uid; -+ break; -+ } -+ } -+ return uid; -+} -+ -+/* Internal cc_add */ -+static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) -+{ -+ dwc_cc_t *cc; -+ uint32_t uid; -+ -+ if (cc_if->is_host) { -+ uid = cc_match_cdid(cc_if, cdid); -+ } -+ else { -+ uid = cc_match_chid(cc_if, chid); -+ } -+ -+ if (uid) { -+ DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length); -+ cc = cc_find(cc_if, uid); -+ } -+ else { -+ cc = alloc_cc(mem_ctx, name, length); -+ cc->uid = next_uid(cc_if); -+ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry); -+ } -+ -+ DWC_MEMCPY(&(cc->chid[0]), chid, 16); -+ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); -+ DWC_MEMCPY(&(cc->ck[0]), ck, 16); -+ -+ DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length); -+ dump_bytes("CHID", cc->chid, 16); -+ dump_bytes("CDID", cc->cdid, 16); -+ dump_bytes("CK", cc->ck, 16); -+ return cc->uid; -+} -+ -+/* Internal cc_clear */ -+static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) -+{ -+ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) { -+ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list); -+ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); -+ free_cc(mem_ctx, cc); -+ } -+} -+ -+dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, -+ dwc_notifier_t *notifier, unsigned is_host) -+{ -+ dwc_cc_if_t *cc_if = NULL; -+ -+ /* Allocate a common_cc_if structure */ -+ cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t)); -+ -+ if (!cc_if) -+ return NULL; -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex); -+#else -+ cc_if->mutex = dwc_mutex_alloc(mtx_ctx); -+#endif -+ if (!cc_if->mutex) { -+ dwc_free(mem_ctx, cc_if); -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INIT(&cc_if->list); -+ cc_if->is_host = is_host; -+ cc_if->notifier = notifier; -+ return cc_if; -+} -+ -+void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if) -+{ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+ DWC_MUTEX_FREE(cc_if->mutex); -+#else -+ dwc_mutex_free(mtx_ctx, cc_if->mutex); -+#endif -+ cc_clear(mem_ctx, cc_if); -+ dwc_free(mem_ctx, cc_if); -+} -+ -+static void cc_changed(dwc_cc_if_t *cc_if) -+{ -+ if (cc_if->notifier) { -+ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if); -+ } -+} -+ -+void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if) -+{ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc_clear(mem_ctx, cc_if); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ cc_changed(cc_if); -+} -+ -+int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) -+{ -+ uint32_t uid; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ cc_changed(cc_if); -+ -+ return uid; -+} -+ -+void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length) -+{ -+ dwc_cc_t* cc; -+ -+ DWC_DEBUGC("Change connection context %d", id); -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (!cc) { -+ DWC_ERROR("Uid %d not found in cc list\n", id); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return; -+ } -+ -+ if (chid) { -+ DWC_MEMCPY(&(cc->chid[0]), chid, 16); -+ } -+ if (cdid) { -+ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16); -+ } -+ if (ck) { -+ DWC_MEMCPY(&(cc->ck[0]), ck, 16); -+ } -+ -+ if (name) { -+ if (cc->name) { -+ dwc_free(mem_ctx, cc->name); -+ } -+ cc->name = dwc_alloc(mem_ctx, length); -+ if (!cc->name) { -+ DWC_ERROR("Out of memory in dwc_cc_change()\n"); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return; -+ } -+ cc->length = length; -+ DWC_MEMCPY(cc->name, name, length); -+ } -+ -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ cc_changed(cc_if); -+ -+ DWC_DEBUGC("Changed connection context id=%d\n", id); -+ dump_bytes("New CHID", cc->chid, 16); -+ dump_bytes("New CDID", cc->cdid, 16); -+ dump_bytes("New CK", cc->ck, 16); -+} -+ -+void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id) -+{ -+ dwc_cc_t *cc; -+ -+ DWC_DEBUGC("Removing connection context %d", id); -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (!cc) { -+ DWC_ERROR("Uid %d not found in cc list\n", id); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return; -+ } -+ -+ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ free_cc(mem_ctx, cc); -+ -+ cc_changed(cc_if); -+} -+ -+uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length) -+{ -+ uint8_t *buf, *x; -+ uint8_t zero = 0; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ *length = cc_data_size(cc_if); -+ if (!(*length)) { -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return NULL; -+ } -+ -+ DWC_DEBUGC("Creating data for saving (length=%d)", *length); -+ -+ buf = dwc_alloc(mem_ctx, *length); -+ if (!buf) { -+ *length = 0; -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return NULL; -+ } -+ -+ x = buf; -+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) { -+ DWC_MEMCPY(x, cc->chid, 16); -+ x += 16; -+ DWC_MEMCPY(x, cc->cdid, 16); -+ x += 16; -+ DWC_MEMCPY(x, cc->ck, 16); -+ x += 16; -+ if (cc->name) { -+ DWC_MEMCPY(x, &cc->length, 1); -+ x += 1; -+ DWC_MEMCPY(x, cc->name, cc->length); -+ x += cc->length; -+ } -+ else { -+ DWC_MEMCPY(x, &zero, 1); -+ x += 1; -+ } -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return buf; -+} -+ -+void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length) -+{ -+ uint8_t name_length; -+ uint8_t *name; -+ uint8_t *chid; -+ uint8_t *cdid; -+ uint8_t *ck; -+ uint32_t i = 0; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc_clear(mem_ctx, cc_if); -+ -+ while (i < length) { -+ chid = &data[i]; -+ i += 16; -+ cdid = &data[i]; -+ i += 16; -+ ck = &data[i]; -+ i += 16; -+ -+ name_length = data[i]; -+ i ++; -+ -+ if (name_length) { -+ name = &data[i]; -+ i += name_length; -+ } -+ else { -+ name = NULL; -+ } -+ -+ /* check to see if we haven't overflown the buffer */ -+ if (i > length) { -+ DWC_ERROR("Data format error while attempting to load CCs " -+ "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length); -+ break; -+ } -+ -+ cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length); -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ cc_changed(cc_if); -+} -+ -+uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid) -+{ -+ uint32_t uid = 0; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ uid = cc_match_chid(cc_if, chid); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return uid; -+} -+uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid) -+{ -+ uint32_t uid = 0; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ uid = cc_match_cdid(cc_if, cdid); -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ return uid; -+} -+ -+uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id) -+{ -+ uint8_t *ck = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ ck = cc->ck; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return ck; -+ -+} -+ -+uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id) -+{ -+ uint8_t *retval = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ retval = cc->chid; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return retval; -+} -+ -+uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id) -+{ -+ uint8_t *retval = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ retval = cc->cdid; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return retval; -+} -+ -+uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length) -+{ -+ uint8_t *retval = NULL; -+ dwc_cc_t *cc; -+ -+ DWC_MUTEX_LOCK(cc_if->mutex); -+ *length = 0; -+ cc = cc_find(cc_if, id); -+ if (cc) { -+ *length = cc->length; -+ retval = cc->name; -+ } -+ DWC_MUTEX_UNLOCK(cc_if->mutex); -+ -+ return retval; -+} -+ -+#endif /* DWC_CCLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_cc.h -@@ -0,0 +1,224 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $ -+ * $Revision: #4 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifndef _DWC_CC_H_ -+#define _DWC_CC_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * This file defines the Context Context library. -+ * -+ * The main data structure is dwc_cc_if_t which is returned by either the -+ * dwc_cc_if_alloc function or returned by the module to the user via a provided -+ * function. The data structure is opaque and should only be manipulated via the -+ * functions provied in this API. -+ * -+ * It manages a list of connection contexts and operations can be performed to -+ * add, remove, query, search, and change, those contexts. Additionally, -+ * a dwc_notifier_t object can be requested from the manager so that -+ * the user can be notified whenever the context list has changed. -+ */ -+ -+#include "dwc_os.h" -+#include "dwc_list.h" -+#include "dwc_notifier.h" -+ -+ -+/* Notifications */ -+#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION" -+ -+struct dwc_cc_if; -+typedef struct dwc_cc_if dwc_cc_if_t; -+ -+ -+/** @name Connection Context Operations */ -+/** @{ */ -+ -+/** This function allocates memory for a dwc_cc_if_t structure, initializes -+ * fields to default values, and returns a pointer to the structure or NULL on -+ * error. */ -+extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx, -+ dwc_notifier_t *notifier, unsigned is_host); -+ -+/** Frees the memory for the specified CC structure allocated from -+ * dwc_cc_if_alloc(). */ -+extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if); -+ -+/** Removes all contexts from the connection context list */ -+extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if); -+ -+/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list. -+ * If a CHID already exists, the CK and name are overwritten. Statistics are -+ * not overwritten. -+ * -+ * @param cc_if The cc_if structure. -+ * @param chid A pointer to the 16-byte CHID. This value will be copied. -+ * @param ck A pointer to the 16-byte CK. This value will be copied. -+ * @param cdid A pointer to the 16-byte CDID. This value will be copied. -+ * @param name An optional host friendly name as defined in the association model -+ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name. -+ * @param length The length othe unicode string. -+ * @return A unique identifier used to refer to this context that is valid for -+ * as long as this context is still in the list. */ -+extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid, -+ uint8_t *cdid, uint8_t *ck, uint8_t *name, -+ uint8_t length); -+ -+/** Changes the CHID, CK, CDID, or Name values of a connection context in the -+ * list, preserving any accumulated statistics. This would typically be called -+ * if the host decideds to change the context with a SET_CONNECTION request. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL -+ * indicates no change. -+ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL -+ * indicates no change. -+ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL -+ * indicates no change. -+ * @param name Host friendly name UTF16-LE. NULL indicates no change. -+ * @param length Length of name. */ -+extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, -+ uint8_t *chid, uint8_t *cdid, uint8_t *ck, -+ uint8_t *name, uint8_t length); -+ -+/** Remove the specified connection context. -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context to remove. */ -+extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id); -+ -+/** Get a binary block of data for the connection context list and attributes. -+ * This data can be used by the OS specific driver to save the connection -+ * context list into non-volatile memory. -+ * -+ * @param cc_if The cc_if structure. -+ * @param length Return the length of the data buffer. -+ * @return A pointer to the data buffer. The memory for this buffer should be -+ * freed with DWC_FREE() after use. */ -+extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, -+ unsigned int *length); -+ -+/** Restore the connection context list from the binary data that was previously -+ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific -+ * driver to load a connection context list from non-volatile memory. -+ * -+ * @param cc_if The cc_if structure. -+ * @param data The data bytes as returned from dwc_cc_data_for_save. -+ * @param length The length of the data. */ -+extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, -+ uint8_t *data, unsigned int length); -+ -+/** Find the connection context from the specified CHID. -+ * -+ * @param cc_if The cc_if structure. -+ * @param chid A pointer to the CHID data. -+ * @return A non-zero identifier of the connection context if the CHID matches. -+ * Otherwise returns 0. */ -+extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid); -+ -+/** Find the connection context from the specified CDID. -+ * -+ * @param cc_if The cc_if structure. -+ * @param cdid A pointer to the CDID data. -+ * @return A non-zero identifier of the connection context if the CHID matches. -+ * Otherwise returns 0. */ -+extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid); -+ -+/** Retrieve the CK from the specified connection context. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @return A pointer to the CK data. The memory does not need to be freed. */ -+extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id); -+ -+/** Retrieve the CHID from the specified connection context. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @return A pointer to the CHID data. The memory does not need to be freed. */ -+extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id); -+ -+/** Retrieve the CDID from the specified connection context. -+ * -+ * @param cc_if The cc_if structure. -+ * @param id The identifier of the connection context. -+ * @return A pointer to the CDID data. The memory does not need to be freed. */ -+extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id); -+ -+extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length); -+ -+/** Checks a buffer for non-zero. -+ * @param id A pointer to a 16 byte buffer. -+ * @return true if the 16 byte value is non-zero. */ -+static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) { -+ int i; -+ for (i=0; i<16; i++) { -+ if (id[i]) return 1; -+ } -+ return 0; -+} -+ -+/** Checks a buffer for zero. -+ * @param id A pointer to a 16 byte buffer. -+ * @return true if the 16 byte value is zero. */ -+static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) { -+ return !dwc_assoc_is_not_zero_id(id); -+} -+ -+/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into -+ * buffer. */ -+static inline int dwc_print_id_string(char *buffer, uint8_t *id) { -+ char *ptr = buffer; -+ int i; -+ for (i=0; i<16; i++) { -+ ptr += DWC_SPRINTF(ptr, "%02x", id[i]); -+ if (i < 15) { -+ ptr += DWC_SPRINTF(ptr, " "); -+ } -+ } -+ return ptr - buffer; -+} -+ -+/** @} */ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_CC_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c -@@ -0,0 +1,1308 @@ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+#ifdef DWC_CCLIB -+# include "dwc_cc.h" -+#endif -+ -+#ifdef DWC_CRYPTOLIB -+# include "dwc_modpow.h" -+# include "dwc_dh.h" -+# include "dwc_crypto.h" -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+# include "dwc_notifier.h" -+#endif -+ -+/* OS-Level Implementations */ -+ -+/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */ -+ -+ -+/* MISC */ -+ -+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) -+{ -+ return memset(dest, byte, size); -+} -+ -+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) -+{ -+ return memcpy(dest, src, size); -+} -+ -+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) -+{ -+ bcopy(src, dest, size); -+ return dest; -+} -+ -+int DWC_MEMCMP(void *m1, void *m2, uint32_t size) -+{ -+ return memcmp(m1, m2, size); -+} -+ -+int DWC_STRNCMP(void *s1, void *s2, uint32_t size) -+{ -+ return strncmp(s1, s2, size); -+} -+ -+int DWC_STRCMP(void *s1, void *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+int DWC_STRLEN(char const *str) -+{ -+ return strlen(str); -+} -+ -+char *DWC_STRCPY(char *to, char const *from) -+{ -+ return strcpy(to, from); -+} -+ -+char *DWC_STRDUP(char const *str) -+{ -+ int len = DWC_STRLEN(str) + 1; -+ char *new = DWC_ALLOC_ATOMIC(len); -+ -+ if (!new) { -+ return NULL; -+ } -+ -+ DWC_MEMCPY(new, str, len); -+ return new; -+} -+ -+int DWC_ATOI(char *str, int32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = strtol(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+int DWC_ATOUI(char *str, uint32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+ -+#ifdef DWC_UTFLIB -+/* From usbstring.c */ -+ -+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+ -+#endif /* DWC_UTFLIB */ -+ -+ -+/* dwc_debug.h */ -+ -+dwc_bool_t DWC_IN_IRQ(void) -+{ -+// return in_irq(); -+ return 0; -+} -+ -+dwc_bool_t DWC_IN_BH(void) -+{ -+// return in_softirq(); -+ return 0; -+} -+ -+void DWC_VPRINTF(char *format, va_list args) -+{ -+ vprintf(format, args); -+} -+ -+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) -+{ -+ return vsnprintf(str, size, format, args); -+} -+ -+void DWC_PRINTF(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+int DWC_SPRINTF(char *buffer, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsprintf(buffer, format, args); -+ va_end(args); -+ return retval; -+} -+ -+int DWC_SNPRINTF(char *buffer, int size, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsnprintf(buffer, size, format, args); -+ va_end(args); -+ return retval; -+} -+ -+void __DWC_WARN(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void __DWC_ERROR(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void DWC_EXCEPTION(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+// BUG_ON(1); ??? -+} -+ -+#ifdef DEBUG -+void __DWC_DEBUG(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+#endif -+ -+ -+/* dwc_mem.h */ -+ -+#if 0 -+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, -+ uint32_t align, -+ uint32_t alloc) -+{ -+ struct dma_pool *pool = dma_pool_create("Pool", NULL, -+ size, align, alloc); -+ return (dwc_pool_t *)pool; -+} -+ -+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) -+{ -+ dma_pool_destroy((struct dma_pool *)pool); -+} -+ -+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); -+ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); -+} -+ -+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); -+ memset(..); -+} -+ -+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) -+{ -+ dma_pool_free(pool, vaddr, daddr); -+} -+#endif -+ -+static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) -+{ -+ if (error) -+ return; -+ *(bus_addr_t *)arg = segs[0].ds_addr; -+} -+ -+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ int error; -+ -+ error = bus_dma_tag_create( -+#if __FreeBSD_version >= 700000 -+ bus_get_dma_tag(dma->dev), /* parent */ -+#else -+ NULL, /* parent */ -+#endif -+ 4, 0, /* alignment, bounds */ -+ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */ -+ BUS_SPACE_MAXADDR, /* highaddr */ -+ NULL, NULL, /* filter, filterarg */ -+ size, /* maxsize */ -+ 1, /* nsegments */ -+ size, /* maxsegsize */ -+ 0, /* flags */ -+ NULL, /* lockfunc */ -+ NULL, /* lockarg */ -+ &dma->dma_tag); -+ if (error) { -+ device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n", -+ __func__, error); -+ goto fail_0; -+ } -+ -+ error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr, -+ BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map); -+ if (error) { -+ device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n", -+ __func__, (uintmax_t)size, error); -+ goto fail_1; -+ } -+ -+ dma->dma_paddr = 0; -+ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size, -+ dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT); -+ if (error || dma->dma_paddr == 0) { -+ device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n", -+ __func__, error); -+ goto fail_2; -+ } -+ -+ *dma_addr = dma->dma_paddr; -+ return dma->dma_vaddr; -+ -+fail_2: -+ bus_dmamap_unload(dma->dma_tag, dma->dma_map); -+fail_1: -+ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); -+ bus_dma_tag_destroy(dma->dma_tag); -+fail_0: -+ dma->dma_map = NULL; -+ dma->dma_tag = NULL; -+ -+ return NULL; -+} -+ -+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ -+ if (dma->dma_tag == NULL) -+ return; -+ if (dma->dma_map != NULL) { -+ bus_dmamap_sync(dma->dma_tag, dma->dma_map, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ bus_dmamap_unload(dma->dma_tag, dma->dma_map); -+ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map); -+ dma->dma_map = NULL; -+ } -+ -+ bus_dma_tag_destroy(dma->dma_tag); -+ dma->dma_tag = NULL; -+} -+ -+void *__DWC_ALLOC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); -+} -+ -+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); -+} -+ -+void __DWC_FREE(void *mem_ctx, void *addr) -+{ -+ free(addr, M_DEVBUF); -+} -+ -+ -+#ifdef DWC_CRYPTOLIB -+/* dwc_crypto.h */ -+ -+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) -+{ -+ get_random_bytes(buffer, length); -+} -+ -+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) -+{ -+ struct crypto_blkcipher *tfm; -+ struct blkcipher_desc desc; -+ struct scatterlist sgd; -+ struct scatterlist sgs; -+ -+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); -+ if (tfm == NULL) { -+ printk("failed to load transform for aes CBC\n"); -+ return -1; -+ } -+ -+ crypto_blkcipher_setkey(tfm, key, keylen); -+ crypto_blkcipher_set_iv(tfm, iv, 16); -+ -+ sg_init_one(&sgd, out, messagelen); -+ sg_init_one(&sgs, message, messagelen); -+ -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { -+ crypto_free_blkcipher(tfm); -+ DWC_ERROR("AES CBC encryption failed"); -+ return -1; -+ } -+ -+ crypto_free_blkcipher(tfm); -+ return 0; -+} -+ -+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, len); -+ crypto_hash_digest(&desc, &sg, len, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, messagelen); -+ crypto_hash_setkey(tfm, key, keylen); -+ crypto_hash_digest(&desc, &sg, messagelen, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/* Byte Ordering Conversions */ -+ -+uint32_t DWC_CPU_TO_LE32(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_CPU_TO_BE32(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_LE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_BE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_LE16(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_BE16(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_LE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_BE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+ -+/* Registers */ -+ -+uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_4(io->iot, io->ioh, ior); -+} -+ -+#if 0 -+uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_8(io->iot, io->ioh, ior); -+} -+#endif -+ -+void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, value); -+} -+ -+#if 0 -+void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, value); -+} -+#endif -+ -+void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, -+ uint32_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, -+ (bus_space_read_4(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+ -+#if 0 -+void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, -+ uint64_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, -+ (bus_space_read_8(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+#endif -+ -+ -+/* Locking */ -+ -+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) -+{ -+ struct mtx *sl = DWC_ALLOC(sizeof(*sl)); -+ -+ if (!sl) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ return NULL; -+ } -+ -+ mtx_init(sl, "dw3spn", NULL, MTX_SPIN); -+ return (dwc_spinlock_t *)sl; -+} -+ -+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) -+{ -+ struct mtx *sl = (struct mtx *)lock; -+ -+ mtx_destroy(sl); -+ DWC_FREE(sl); -+} -+ -+void DWC_SPINLOCK(dwc_spinlock_t *lock) -+{ -+ mtx_lock_spin((struct mtx *)lock); // ??? -+} -+ -+void DWC_SPINUNLOCK(dwc_spinlock_t *lock) -+{ -+ mtx_unlock_spin((struct mtx *)lock); // ??? -+} -+ -+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) -+{ -+ mtx_lock_spin((struct mtx *)lock); -+} -+ -+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) -+{ -+ mtx_unlock_spin((struct mtx *)lock); -+} -+ -+dwc_mutex_t *DWC_MUTEX_ALLOC(void) -+{ -+ struct mtx *m; -+ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx)); -+ -+ if (!mutex) { -+ DWC_ERROR("Cannot allocate memory for mutex"); -+ return NULL; -+ } -+ -+ m = (struct mtx *)mutex; -+ mtx_init(m, "dw3mtx", NULL, MTX_DEF); -+ return mutex; -+} -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+#else -+void DWC_MUTEX_FREE(dwc_mutex_t *mutex) -+{ -+ mtx_destroy((struct mtx *)mutex); -+ DWC_FREE(mutex); -+} -+#endif -+ -+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) -+{ -+ struct mtx *m = (struct mtx *)mutex; -+ -+ mtx_lock(m); -+} -+ -+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) -+{ -+ struct mtx *m = (struct mtx *)mutex; -+ -+ return mtx_trylock(m); -+} -+ -+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) -+{ -+ struct mtx *m = (struct mtx *)mutex; -+ -+ mtx_unlock(m); -+} -+ -+ -+/* Timing */ -+ -+void DWC_UDELAY(uint32_t usecs) -+{ -+ DELAY(usecs); -+} -+ -+void DWC_MDELAY(uint32_t msecs) -+{ -+ do { -+ DELAY(1000); -+ } while (--msecs); -+} -+ -+void DWC_MSLEEP(uint32_t msecs) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ pause("dw3slp", tvtohz(&tv)); -+} -+ -+uint32_t DWC_TIME(void) -+{ -+ struct timeval tv; -+ -+ microuptime(&tv); // or getmicrouptime? (less precise, but faster) -+ return tv.tv_sec * 1000 + tv.tv_usec / 1000; -+} -+ -+ -+/* Timers */ -+ -+struct dwc_timer { -+ struct callout t; -+ char *name; -+ dwc_spinlock_t *lock; -+ dwc_timer_callback_t cb; -+ void *data; -+}; -+ -+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) -+{ -+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (!t) { -+ DWC_ERROR("Cannot allocate memory for timer"); -+ return NULL; -+ } -+ -+ callout_init(&t->t, 1); -+ -+ t->name = DWC_STRDUP(name); -+ if (!t->name) { -+ DWC_ERROR("Cannot allocate memory for timer->name"); -+ goto no_name; -+ } -+ -+ t->lock = DWC_SPINLOCK_ALLOC(); -+ if (!t->lock) { -+ DWC_ERROR("Cannot allocate memory for lock"); -+ goto no_lock; -+ } -+ -+ t->cb = cb; -+ t->data = data; -+ -+ return t; -+ -+ no_lock: -+ DWC_FREE(t->name); -+ no_name: -+ DWC_FREE(t); -+ -+ return NULL; -+} -+ -+void DWC_TIMER_FREE(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+ DWC_SPINLOCK_FREE(timer->lock); -+ DWC_FREE(timer->name); -+ DWC_FREE(timer); -+} -+ -+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); -+} -+ -+void DWC_TIMER_CANCEL(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+} -+ -+ -+/* Wait Queues */ -+ -+struct dwc_waitq { -+ struct mtx lock; -+ int abort; -+}; -+ -+dwc_waitq_t *DWC_WAITQ_ALLOC(void) -+{ -+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ return NULL; -+ } -+ -+ mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF); -+ wq->abort = 0; -+ -+ return wq; -+} -+ -+void DWC_WAITQ_FREE(dwc_waitq_t *wq) -+{ -+ mtx_destroy(&wq->lock); -+ DWC_FREE(wq); -+} -+ -+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) -+{ -+// intrmask_t ipl; -+ int result = 0; -+ -+ mtx_lock(&wq->lock); -+// ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+// splx(ipl); -+ result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout -+// ipl = splbio(); -+ } -+ -+ if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ -+ } else if (result == EINTR) { // signaled - interrupt -+ result = -DWC_E_ABORT; -+ -+ } else if (wq->abort) { -+ result = -DWC_E_ABORT; -+ -+ } else { -+ result = 0; -+ } -+ -+ wq->abort = 0; -+// splx(ipl); -+ mtx_unlock(&wq->lock); -+ return result; -+} -+ -+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs) -+{ -+ struct timeval tv, tv1, tv2; -+// intrmask_t ipl; -+ int result = 0; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ -+ mtx_lock(&wq->lock); -+// ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+// splx(ipl); -+ getmicrouptime(&tv1); -+ result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv)); -+ getmicrouptime(&tv2); -+// ipl = splbio(); -+ } -+ -+ if (result == 0) { // awoken -+ if (wq->abort) { -+ result = -DWC_E_ABORT; -+ } else { -+ tv2.tv_usec -= tv1.tv_usec; -+ if (tv2.tv_usec < 0) { -+ tv2.tv_usec += 1000000; -+ tv2.tv_sec--; -+ } -+ -+ tv2.tv_sec -= tv1.tv_sec; -+ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; -+ result = msecs - result; -+ if (result <= 0) -+ result = 1; -+ } -+ } else if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ -+ } else if (result == EINTR) { // signaled - interrupt -+ result = -DWC_E_ABORT; -+ -+ } else { // timed out -+ result = -DWC_E_TIMEOUT; -+ } -+ -+ wq->abort = 0; -+// splx(ipl); -+ mtx_unlock(&wq->lock); -+ return result; -+} -+ -+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) -+{ -+ wakeup(wq); -+} -+ -+void DWC_WAITQ_ABORT(dwc_waitq_t *wq) -+{ -+// intrmask_t ipl; -+ -+ mtx_lock(&wq->lock); -+// ipl = splbio(); -+ wq->abort = 1; -+ wakeup(wq); -+// splx(ipl); -+ mtx_unlock(&wq->lock); -+} -+ -+ -+/* Threading */ -+ -+struct dwc_thread { -+ struct proc *proc; -+ int abort; -+}; -+ -+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) -+{ -+ int retval; -+ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); -+ -+ if (!thread) { -+ return NULL; -+ } -+ -+ thread->abort = 0; -+ retval = kthread_create((void (*)(void *))func, data, &thread->proc, -+ RFPROC | RFNOWAIT, 0, "%s", name); -+ if (retval) { -+ DWC_FREE(thread); -+ return NULL; -+ } -+ -+ return thread; -+} -+ -+int DWC_THREAD_STOP(dwc_thread_t *thread) -+{ -+ int retval; -+ -+ thread->abort = 1; -+ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); -+ -+ if (retval == 0) { -+ /* DWC_THREAD_EXIT() will free the thread struct */ -+ return 0; -+ } -+ -+ /* NOTE: We leak the thread struct if thread doesn't die */ -+ -+ if (retval == EWOULDBLOCK) { -+ return -DWC_E_TIMEOUT; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) -+{ -+ return thread->abort; -+} -+ -+void DWC_THREAD_EXIT(dwc_thread_t *thread) -+{ -+ wakeup(&thread->abort); -+ DWC_FREE(thread); -+ kthread_exit(0); -+} -+ -+ -+/* tasklets -+ - Runs in interrupt context (cannot sleep) -+ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ] -+ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ] -+ */ -+struct dwc_tasklet { -+ struct task t; -+ dwc_tasklet_callback_t cb; -+ void *data; -+}; -+ -+static void tasklet_callback(void *data, int pending) // what to do with pending ??? -+{ -+ dwc_tasklet_t *task = (dwc_tasklet_t *)data; -+ -+ task->cb(task->data); -+} -+ -+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) -+{ -+ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); -+ -+ if (task) { -+ task->cb = cb; -+ task->data = data; -+ TASK_INIT(&task->t, 0, tasklet_callback, task); -+ } else { -+ DWC_ERROR("Cannot allocate memory for tasklet"); -+ } -+ -+ return task; -+} -+ -+void DWC_TASK_FREE(dwc_tasklet_t *task) -+{ -+ taskqueue_drain(taskqueue_fast, &task->t); // ??? -+ DWC_FREE(task); -+} -+ -+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) -+{ -+ /* Uses predefined system queue */ -+ taskqueue_enqueue_fast(taskqueue_fast, &task->t); -+} -+ -+ -+/* workqueues -+ - Runs in process context (can sleep) -+ */ -+typedef struct work_container { -+ dwc_work_callback_t cb; -+ void *data; -+ dwc_workq_t *wq; -+ char *name; -+ int hz; -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_ENTRY(work_container) entry; -+#endif -+ struct task task; -+} work_container_t; -+ -+#ifdef DEBUG -+DWC_CIRCLEQ_HEAD(work_container_queue, work_container); -+#endif -+ -+struct dwc_workq { -+ struct taskqueue *taskq; -+ dwc_spinlock_t *lock; -+ dwc_waitq_t *waitq; -+ int pending; -+ -+#ifdef DEBUG -+ struct work_container_queue entries; -+#endif -+}; -+ -+static void do_work(void *data, int pending) // what to do with pending ??? -+{ -+ work_container_t *container = (work_container_t *)data; -+ dwc_workq_t *wq = container->wq; -+ dwc_irqflags_t flags; -+ -+ if (container->hz) { -+ pause("dw3wrk", container->hz); -+ } -+ -+ container->cb(container->data); -+ DWC_DEBUG("Work done: %s, container=%p", container->name, container); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); -+#endif -+ if (container->name) -+ DWC_FREE(container->name); -+ DWC_FREE(container); -+ wq->pending--; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+} -+ -+static int work_done(void *data) -+{ -+ dwc_workq_t *workq = (dwc_workq_t *)data; -+ -+ return workq->pending == 0; -+} -+ -+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) -+{ -+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); -+} -+ -+dwc_workq_t *DWC_WORKQ_ALLOC(char *name) -+{ -+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for workqueue"); -+ return NULL; -+ } -+ -+ wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq); -+ if (!wq->taskq) { -+ DWC_ERROR("Cannot allocate memory for taskqueue"); -+ goto no_taskq; -+ } -+ -+ wq->pending = 0; -+ -+ wq->lock = DWC_SPINLOCK_ALLOC(); -+ if (!wq->lock) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ goto no_lock; -+ } -+ -+ wq->waitq = DWC_WAITQ_ALLOC(); -+ if (!wq->waitq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ goto no_waitq; -+ } -+ -+ taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk"); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INIT(&wq->entries); -+#endif -+ return wq; -+ -+ no_waitq: -+ DWC_SPINLOCK_FREE(wq->lock); -+ no_lock: -+ taskqueue_free(wq->taskq); -+ no_taskq: -+ DWC_FREE(wq); -+ -+ return NULL; -+} -+ -+void DWC_WORKQ_FREE(dwc_workq_t *wq) -+{ -+#ifdef DEBUG -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ -+ if (wq->pending != 0) { -+ struct work_container *container; -+ -+ DWC_ERROR("Destroying work queue with pending work"); -+ -+ DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) { -+ DWC_ERROR("Work %s still pending", container->name); -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+#endif -+ DWC_WAITQ_FREE(wq->waitq); -+ DWC_SPINLOCK_FREE(wq->lock); -+ taskqueue_free(wq->taskq); -+ DWC_FREE(wq); -+} -+ -+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, -+ char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ container->hz = 0; -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ -+ TASK_INIT(&container->task, 0, do_work, container); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ taskqueue_enqueue_fast(wq->taskq, &container->task); -+} -+ -+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ struct timeval tv; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ container->hz = tvtohz(&tv); -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ -+ TASK_INIT(&container->task, 0, do_work, container); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ taskqueue_enqueue_fast(wq->taskq, &container->task); -+} -+ -+int DWC_WORKQ_PENDING(dwc_workq_t *wq) -+{ -+ return wq->pending; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c -@@ -0,0 +1,1418 @@ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/kthread.h> -+ -+#ifdef DWC_CCLIB -+# include "dwc_cc.h" -+#endif -+ -+#ifdef DWC_CRYPTOLIB -+# include "dwc_modpow.h" -+# include "dwc_dh.h" -+# include "dwc_crypto.h" -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+# include "dwc_notifier.h" -+#endif -+ -+/* OS-Level Implementations */ -+ -+/* This is the Linux kernel implementation of the DWC platform library. */ -+#include <linux/moduleparam.h> -+#include <linux/ctype.h> -+#include <linux/crypto.h> -+#include <linux/delay.h> -+#include <linux/device.h> -+#include <linux/dma-mapping.h> -+#include <linux/cdev.h> -+#include <linux/errno.h> -+#include <linux/interrupt.h> -+#include <linux/jiffies.h> -+#include <linux/list.h> -+#include <linux/pci.h> -+#include <linux/random.h> -+#include <linux/scatterlist.h> -+#include <linux/slab.h> -+#include <linux/stat.h> -+#include <linux/string.h> -+#include <linux/timer.h> -+#include <linux/usb.h> -+ -+#include <linux/version.h> -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) -+# include <linux/usb/gadget.h> -+#else -+# include <linux/usb_gadget.h> -+#endif -+ -+#include <asm/io.h> -+#include <asm/page.h> -+#include <asm/uaccess.h> -+#include <asm/unaligned.h> -+ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+ -+/* MISC */ -+ -+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) -+{ -+ return memset(dest, byte, size); -+} -+ -+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) -+{ -+ return memcpy(dest, src, size); -+} -+ -+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) -+{ -+ return memmove(dest, src, size); -+} -+ -+int DWC_MEMCMP(void *m1, void *m2, uint32_t size) -+{ -+ return memcmp(m1, m2, size); -+} -+ -+int DWC_STRNCMP(void *s1, void *s2, uint32_t size) -+{ -+ return strncmp(s1, s2, size); -+} -+ -+int DWC_STRCMP(void *s1, void *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+int DWC_STRLEN(char const *str) -+{ -+ return strlen(str); -+} -+ -+char *DWC_STRCPY(char *to, char const *from) -+{ -+ return strcpy(to, from); -+} -+ -+char *DWC_STRDUP(char const *str) -+{ -+ int len = DWC_STRLEN(str) + 1; -+ char *new = DWC_ALLOC_ATOMIC(len); -+ -+ if (!new) { -+ return NULL; -+ } -+ -+ DWC_MEMCPY(new, str, len); -+ return new; -+} -+ -+int DWC_ATOI(const char *str, int32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = simple_strtol(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+int DWC_ATOUI(const char *str, uint32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = simple_strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+ -+#ifdef DWC_UTFLIB -+/* From usbstring.c */ -+ -+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+#endif /* DWC_UTFLIB */ -+ -+ -+/* dwc_debug.h */ -+ -+dwc_bool_t DWC_IN_IRQ(void) -+{ -+ return in_irq(); -+} -+ -+dwc_bool_t DWC_IN_BH(void) -+{ -+ return in_softirq(); -+} -+ -+void DWC_VPRINTF(char *format, va_list args) -+{ -+ vprintk(format, args); -+} -+ -+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) -+{ -+ return vsnprintf(str, size, format, args); -+} -+ -+void DWC_PRINTF(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+int DWC_SPRINTF(char *buffer, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsprintf(buffer, format, args); -+ va_end(args); -+ return retval; -+} -+ -+int DWC_SNPRINTF(char *buffer, int size, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsnprintf(buffer, size, format, args); -+ va_end(args); -+ return retval; -+} -+ -+void __DWC_WARN(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_WARNING); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void __DWC_ERROR(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_ERR); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void DWC_EXCEPTION(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_ERR); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+ BUG_ON(1); -+} -+ -+#ifdef DEBUG -+void __DWC_DEBUG(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_PRINTF(KERN_DEBUG); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+#endif -+ -+ -+/* dwc_mem.h */ -+ -+#if 0 -+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, -+ uint32_t align, -+ uint32_t alloc) -+{ -+ struct dma_pool *pool = dma_pool_create("Pool", NULL, -+ size, align, alloc); -+ return (dwc_pool_t *)pool; -+} -+ -+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) -+{ -+ dma_pool_destroy((struct dma_pool *)pool); -+} -+ -+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); -+} -+ -+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); -+ memset(..); -+} -+ -+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) -+{ -+ dma_pool_free(pool, vaddr, daddr); -+} -+#endif -+ -+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_KERNEL | GFP_DMA32); -+} -+ -+void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_ATOMIC); -+} -+ -+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) -+{ -+ dma_free_coherent(dma_ctx, size, virt_addr, dma_addr); -+} -+ -+void *__DWC_ALLOC(void *mem_ctx, uint32_t size) -+{ -+ return kzalloc(size, GFP_KERNEL); -+} -+ -+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) -+{ -+ return kzalloc(size, GFP_ATOMIC); -+} -+ -+void __DWC_FREE(void *mem_ctx, void *addr) -+{ -+ kfree(addr); -+} -+ -+ -+#ifdef DWC_CRYPTOLIB -+/* dwc_crypto.h */ -+ -+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) -+{ -+ get_random_bytes(buffer, length); -+} -+ -+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) -+{ -+ struct crypto_blkcipher *tfm; -+ struct blkcipher_desc desc; -+ struct scatterlist sgd; -+ struct scatterlist sgs; -+ -+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); -+ if (tfm == NULL) { -+ printk("failed to load transform for aes CBC\n"); -+ return -1; -+ } -+ -+ crypto_blkcipher_setkey(tfm, key, keylen); -+ crypto_blkcipher_set_iv(tfm, iv, 16); -+ -+ sg_init_one(&sgd, out, messagelen); -+ sg_init_one(&sgs, message, messagelen); -+ -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { -+ crypto_free_blkcipher(tfm); -+ DWC_ERROR("AES CBC encryption failed"); -+ return -1; -+ } -+ -+ crypto_free_blkcipher(tfm); -+ return 0; -+} -+ -+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, len); -+ crypto_hash_digest(&desc, &sg, len, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, messagelen); -+ crypto_hash_setkey(tfm, key, keylen); -+ crypto_hash_digest(&desc, &sg, messagelen, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/* Byte Ordering Conversions */ -+ -+uint32_t DWC_CPU_TO_LE32(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_CPU_TO_BE32(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_LE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_BE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_LE16(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_BE16(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_LE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_BE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+ -+/* Registers */ -+ -+uint32_t DWC_READ_REG32(uint32_t volatile *reg) -+{ -+ return readl(reg); -+} -+ -+#if 0 -+uint64_t DWC_READ_REG64(uint64_t volatile *reg) -+{ -+} -+#endif -+ -+void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value) -+{ -+ writel(value, reg); -+} -+ -+#if 0 -+void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value) -+{ -+} -+#endif -+ -+void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask) -+{ -+ writel((readl(reg) & ~clear_mask) | set_mask, reg); -+} -+ -+#if 0 -+void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask) -+{ -+} -+#endif -+ -+ -+/* Locking */ -+ -+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) -+{ -+ spinlock_t *sl = (spinlock_t *)1; -+ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ sl = DWC_ALLOC(sizeof(*sl)); -+ if (!sl) { -+ DWC_ERROR("Cannot allocate memory for spinlock\n"); -+ return NULL; -+ } -+ -+ spin_lock_init(sl); -+#endif -+ return (dwc_spinlock_t *)sl; -+} -+ -+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ DWC_FREE(lock); -+#endif -+} -+ -+void DWC_SPINLOCK(dwc_spinlock_t *lock) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_lock((spinlock_t *)lock); -+#endif -+} -+ -+void DWC_SPINUNLOCK(dwc_spinlock_t *lock) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_unlock((spinlock_t *)lock); -+#endif -+} -+ -+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) -+{ -+ dwc_irqflags_t f; -+ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_lock_irqsave((spinlock_t *)lock, f); -+#else -+ local_irq_save(f); -+#endif -+ *flags = f; -+} -+ -+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) -+{ -+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP) -+ spin_unlock_irqrestore((spinlock_t *)lock, flags); -+#else -+ local_irq_restore(flags); -+#endif -+} -+ -+dwc_mutex_t *DWC_MUTEX_ALLOC(void) -+{ -+ struct mutex *m; -+ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); -+ -+ if (!mutex) { -+ DWC_ERROR("Cannot allocate memory for mutex\n"); -+ return NULL; -+ } -+ -+ m = (struct mutex *)mutex; -+ mutex_init(m); -+ return mutex; -+} -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+#else -+void DWC_MUTEX_FREE(dwc_mutex_t *mutex) -+{ -+ mutex_destroy((struct mutex *)mutex); -+ DWC_FREE(mutex); -+} -+#endif -+ -+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) -+{ -+ struct mutex *m = (struct mutex *)mutex; -+ mutex_lock(m); -+} -+ -+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) -+{ -+ struct mutex *m = (struct mutex *)mutex; -+ return mutex_trylock(m); -+} -+ -+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) -+{ -+ struct mutex *m = (struct mutex *)mutex; -+ mutex_unlock(m); -+} -+ -+ -+/* Timing */ -+ -+void DWC_UDELAY(uint32_t usecs) -+{ -+ udelay(usecs); -+} -+ -+void DWC_MDELAY(uint32_t msecs) -+{ -+ mdelay(msecs); -+} -+ -+void DWC_MSLEEP(uint32_t msecs) -+{ -+ msleep(msecs); -+} -+ -+uint32_t DWC_TIME(void) -+{ -+ return jiffies_to_msecs(jiffies); -+} -+ -+ -+/* Timers */ -+ -+struct dwc_timer { -+ struct timer_list *t; -+ char *name; -+ dwc_timer_callback_t cb; -+ void *data; -+ uint8_t scheduled; -+ dwc_spinlock_t *lock; -+}; -+ -+static void timer_callback(unsigned long data) -+{ -+ dwc_timer_t *timer = (dwc_timer_t *)data; -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); -+ timer->scheduled = 0; -+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); -+ DWC_DEBUGC("Timer %s callback", timer->name); -+ timer->cb(timer->data); -+} -+ -+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) -+{ -+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (!t) { -+ DWC_ERROR("Cannot allocate memory for timer"); -+ return NULL; -+ } -+ -+ t->t = DWC_ALLOC(sizeof(*t->t)); -+ if (!t->t) { -+ DWC_ERROR("Cannot allocate memory for timer->t"); -+ goto no_timer; -+ } -+ -+ t->name = DWC_STRDUP(name); -+ if (!t->name) { -+ DWC_ERROR("Cannot allocate memory for timer->name"); -+ goto no_name; -+ } -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(t->lock); -+#else -+ t->lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ if (!t->lock) { -+ DWC_ERROR("Cannot allocate memory for lock"); -+ goto no_lock; -+ } -+ -+ t->scheduled = 0; -+ t->t->expires = jiffies; -+ setup_timer(t->t, timer_callback, (unsigned long)t); -+ -+ t->cb = cb; -+ t->data = data; -+ -+ return t; -+ -+ no_lock: -+ DWC_FREE(t->name); -+ no_name: -+ DWC_FREE(t->t); -+ no_timer: -+ DWC_FREE(t); -+ return NULL; -+} -+ -+void DWC_TIMER_FREE(dwc_timer_t *timer) -+{ -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); -+ -+ if (timer->scheduled) { -+ del_timer(timer->t); -+ timer->scheduled = 0; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); -+ DWC_SPINLOCK_FREE(timer->lock); -+ DWC_FREE(timer->t); -+ DWC_FREE(timer->name); -+ DWC_FREE(timer); -+} -+ -+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) -+{ -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags); -+ -+ if (!timer->scheduled) { -+ timer->scheduled = 1; -+ DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time); -+ timer->t->expires = jiffies + msecs_to_jiffies(time); -+ add_timer(timer->t); -+ } else { -+ DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time); -+ mod_timer(timer->t, jiffies + msecs_to_jiffies(time)); -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags); -+} -+ -+void DWC_TIMER_CANCEL(dwc_timer_t *timer) -+{ -+ del_timer(timer->t); -+} -+ -+ -+/* Wait Queues */ -+ -+struct dwc_waitq { -+ wait_queue_head_t queue; -+ int abort; -+}; -+ -+dwc_waitq_t *DWC_WAITQ_ALLOC(void) -+{ -+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue\n"); -+ return NULL; -+ } -+ -+ init_waitqueue_head(&wq->queue); -+ wq->abort = 0; -+ return wq; -+} -+ -+void DWC_WAITQ_FREE(dwc_waitq_t *wq) -+{ -+ DWC_FREE(wq); -+} -+ -+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) -+{ -+ int result = wait_event_interruptible(wq->queue, -+ cond(data) || wq->abort); -+ if (result == -ERESTARTSYS) { -+ wq->abort = 0; -+ return -DWC_E_RESTART; -+ } -+ -+ if (wq->abort == 1) { -+ wq->abort = 0; -+ return -DWC_E_ABORT; -+ } -+ -+ wq->abort = 0; -+ -+ if (result == 0) { -+ return 0; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs) -+{ -+ int32_t tmsecs; -+ int result = wait_event_interruptible_timeout(wq->queue, -+ cond(data) || wq->abort, -+ msecs_to_jiffies(msecs)); -+ if (result == -ERESTARTSYS) { -+ wq->abort = 0; -+ return -DWC_E_RESTART; -+ } -+ -+ if (wq->abort == 1) { -+ wq->abort = 0; -+ return -DWC_E_ABORT; -+ } -+ -+ wq->abort = 0; -+ -+ if (result > 0) { -+ tmsecs = jiffies_to_msecs(result); -+ if (!tmsecs) { -+ return 1; -+ } -+ -+ return tmsecs; -+ } -+ -+ if (result == 0) { -+ return -DWC_E_TIMEOUT; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) -+{ -+ wq->abort = 0; -+ wake_up_interruptible(&wq->queue); -+} -+ -+void DWC_WAITQ_ABORT(dwc_waitq_t *wq) -+{ -+ wq->abort = 1; -+ wake_up_interruptible(&wq->queue); -+} -+ -+ -+/* Threading */ -+ -+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) -+{ -+ struct task_struct *thread = kthread_run(func, data, name); -+ -+ if (thread == ERR_PTR(-ENOMEM)) { -+ return NULL; -+ } -+ -+ return (dwc_thread_t *)thread; -+} -+ -+int DWC_THREAD_STOP(dwc_thread_t *thread) -+{ -+ return kthread_stop((struct task_struct *)thread); -+} -+ -+dwc_bool_t DWC_THREAD_SHOULD_STOP(void) -+{ -+ return kthread_should_stop(); -+} -+ -+ -+/* tasklets -+ - run in interrupt context (cannot sleep) -+ - each tasklet runs on a single CPU -+ - different tasklets can be running simultaneously on different CPUs -+ */ -+struct dwc_tasklet { -+ struct tasklet_struct t; -+ dwc_tasklet_callback_t cb; -+ void *data; -+}; -+ -+static void tasklet_callback(unsigned long data) -+{ -+ dwc_tasklet_t *t = (dwc_tasklet_t *)data; -+ t->cb(t->data); -+} -+ -+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) -+{ -+ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (t) { -+ t->cb = cb; -+ t->data = data; -+ tasklet_init(&t->t, tasklet_callback, (unsigned long)t); -+ } else { -+ DWC_ERROR("Cannot allocate memory for tasklet\n"); -+ } -+ -+ return t; -+} -+ -+void DWC_TASK_FREE(dwc_tasklet_t *task) -+{ -+ DWC_FREE(task); -+} -+ -+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) -+{ -+ tasklet_schedule(&task->t); -+} -+ -+void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task) -+{ -+ tasklet_hi_schedule(&task->t); -+} -+ -+ -+/* workqueues -+ - run in process context (can sleep) -+ */ -+typedef struct work_container { -+ dwc_work_callback_t cb; -+ void *data; -+ dwc_workq_t *wq; -+ char *name; -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_ENTRY(work_container) entry; -+#endif -+ struct delayed_work work; -+} work_container_t; -+ -+#ifdef DEBUG -+DWC_CIRCLEQ_HEAD(work_container_queue, work_container); -+#endif -+ -+struct dwc_workq { -+ struct workqueue_struct *wq; -+ dwc_spinlock_t *lock; -+ dwc_waitq_t *waitq; -+ int pending; -+ -+#ifdef DEBUG -+ struct work_container_queue entries; -+#endif -+}; -+ -+static void do_work(struct work_struct *work) -+{ -+ dwc_irqflags_t flags; -+ struct delayed_work *dw = container_of(work, struct delayed_work, work); -+ work_container_t *container = container_of(dw, struct work_container, work); -+ dwc_workq_t *wq = container->wq; -+ -+ container->cb(container->data); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry); -+#endif -+ DWC_DEBUGC("Work done: %s, container=%p", container->name, container); -+ if (container->name) { -+ DWC_FREE(container->name); -+ } -+ DWC_FREE(container); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending--; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+} -+ -+static int work_done(void *data) -+{ -+ dwc_workq_t *workq = (dwc_workq_t *)data; -+ return workq->pending == 0; -+} -+ -+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) -+{ -+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); -+} -+ -+dwc_workq_t *DWC_WORKQ_ALLOC(char *name) -+{ -+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ return NULL; -+ } -+ -+ wq->wq = create_singlethread_workqueue(name); -+ if (!wq->wq) { -+ goto no_wq; -+ } -+ -+ wq->pending = 0; -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(wq->lock); -+#else -+ wq->lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ if (!wq->lock) { -+ goto no_lock; -+ } -+ -+ wq->waitq = DWC_WAITQ_ALLOC(); -+ if (!wq->waitq) { -+ goto no_waitq; -+ } -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INIT(&wq->entries); -+#endif -+ return wq; -+ -+ no_waitq: -+ DWC_SPINLOCK_FREE(wq->lock); -+ no_lock: -+ destroy_workqueue(wq->wq); -+ no_wq: -+ DWC_FREE(wq); -+ -+ return NULL; -+} -+ -+void DWC_WORKQ_FREE(dwc_workq_t *wq) -+{ -+#ifdef DEBUG -+ if (wq->pending != 0) { -+ struct work_container *wc; -+ DWC_ERROR("Destroying work queue with pending work"); -+ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) { -+ DWC_ERROR("Work %s still pending", wc->name); -+ } -+ } -+#endif -+ destroy_workqueue(wq->wq); -+ DWC_SPINLOCK_FREE(wq->lock); -+ DWC_WAITQ_FREE(wq->waitq); -+ DWC_FREE(wq); -+} -+ -+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, -+ char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container\n"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name\n"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); -+ INIT_WORK(&container->work.work, do_work); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ queue_work(wq->wq, &container->work.work); -+} -+ -+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container\n"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name\n"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container); -+ INIT_DELAYED_WORK(&container->work, do_work); -+ -+#ifdef DEBUG -+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry); -+#endif -+ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time)); -+} -+ -+int DWC_WORKQ_PENDING(dwc_workq_t *wq) -+{ -+ return wq->pending; -+} -+ -+ -+#ifdef DWC_LIBMODULE -+ -+#ifdef DWC_CCLIB -+/* CC */ -+EXPORT_SYMBOL(dwc_cc_if_alloc); -+EXPORT_SYMBOL(dwc_cc_if_free); -+EXPORT_SYMBOL(dwc_cc_clear); -+EXPORT_SYMBOL(dwc_cc_add); -+EXPORT_SYMBOL(dwc_cc_remove); -+EXPORT_SYMBOL(dwc_cc_change); -+EXPORT_SYMBOL(dwc_cc_data_for_save); -+EXPORT_SYMBOL(dwc_cc_restore_from_data); -+EXPORT_SYMBOL(dwc_cc_match_chid); -+EXPORT_SYMBOL(dwc_cc_match_cdid); -+EXPORT_SYMBOL(dwc_cc_ck); -+EXPORT_SYMBOL(dwc_cc_chid); -+EXPORT_SYMBOL(dwc_cc_cdid); -+EXPORT_SYMBOL(dwc_cc_name); -+#endif /* DWC_CCLIB */ -+ -+#ifdef DWC_CRYPTOLIB -+# ifndef CONFIG_MACH_IPMATE -+/* Modpow */ -+EXPORT_SYMBOL(dwc_modpow); -+ -+/* DH */ -+EXPORT_SYMBOL(dwc_dh_modpow); -+EXPORT_SYMBOL(dwc_dh_derive_keys); -+EXPORT_SYMBOL(dwc_dh_pk); -+# endif /* CONFIG_MACH_IPMATE */ -+ -+/* Crypto */ -+EXPORT_SYMBOL(dwc_wusb_aes_encrypt); -+EXPORT_SYMBOL(dwc_wusb_cmf); -+EXPORT_SYMBOL(dwc_wusb_prf); -+EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce); -+EXPORT_SYMBOL(dwc_wusb_gen_nonce); -+EXPORT_SYMBOL(dwc_wusb_gen_key); -+EXPORT_SYMBOL(dwc_wusb_gen_mic); -+#endif /* DWC_CRYPTOLIB */ -+ -+/* Notification */ -+#ifdef DWC_NOTIFYLIB -+EXPORT_SYMBOL(dwc_alloc_notification_manager); -+EXPORT_SYMBOL(dwc_free_notification_manager); -+EXPORT_SYMBOL(dwc_register_notifier); -+EXPORT_SYMBOL(dwc_unregister_notifier); -+EXPORT_SYMBOL(dwc_add_observer); -+EXPORT_SYMBOL(dwc_remove_observer); -+EXPORT_SYMBOL(dwc_notify); -+#endif -+ -+/* Memory Debugging Routines */ -+#ifdef DWC_DEBUG_MEMORY -+EXPORT_SYMBOL(dwc_alloc_debug); -+EXPORT_SYMBOL(dwc_alloc_atomic_debug); -+EXPORT_SYMBOL(dwc_free_debug); -+EXPORT_SYMBOL(dwc_dma_alloc_debug); -+EXPORT_SYMBOL(dwc_dma_free_debug); -+#endif -+ -+EXPORT_SYMBOL(DWC_MEMSET); -+EXPORT_SYMBOL(DWC_MEMCPY); -+EXPORT_SYMBOL(DWC_MEMMOVE); -+EXPORT_SYMBOL(DWC_MEMCMP); -+EXPORT_SYMBOL(DWC_STRNCMP); -+EXPORT_SYMBOL(DWC_STRCMP); -+EXPORT_SYMBOL(DWC_STRLEN); -+EXPORT_SYMBOL(DWC_STRCPY); -+EXPORT_SYMBOL(DWC_STRDUP); -+EXPORT_SYMBOL(DWC_ATOI); -+EXPORT_SYMBOL(DWC_ATOUI); -+ -+#ifdef DWC_UTFLIB -+EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE); -+#endif /* DWC_UTFLIB */ -+ -+EXPORT_SYMBOL(DWC_IN_IRQ); -+EXPORT_SYMBOL(DWC_IN_BH); -+EXPORT_SYMBOL(DWC_VPRINTF); -+EXPORT_SYMBOL(DWC_VSNPRINTF); -+EXPORT_SYMBOL(DWC_PRINTF); -+EXPORT_SYMBOL(DWC_SPRINTF); -+EXPORT_SYMBOL(DWC_SNPRINTF); -+EXPORT_SYMBOL(__DWC_WARN); -+EXPORT_SYMBOL(__DWC_ERROR); -+EXPORT_SYMBOL(DWC_EXCEPTION); -+ -+#ifdef DEBUG -+EXPORT_SYMBOL(__DWC_DEBUG); -+#endif -+ -+EXPORT_SYMBOL(__DWC_DMA_ALLOC); -+EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC); -+EXPORT_SYMBOL(__DWC_DMA_FREE); -+EXPORT_SYMBOL(__DWC_ALLOC); -+EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC); -+EXPORT_SYMBOL(__DWC_FREE); -+ -+#ifdef DWC_CRYPTOLIB -+EXPORT_SYMBOL(DWC_RANDOM_BYTES); -+EXPORT_SYMBOL(DWC_AES_CBC); -+EXPORT_SYMBOL(DWC_SHA256); -+EXPORT_SYMBOL(DWC_HMAC_SHA256); -+#endif -+ -+EXPORT_SYMBOL(DWC_CPU_TO_LE32); -+EXPORT_SYMBOL(DWC_CPU_TO_BE32); -+EXPORT_SYMBOL(DWC_LE32_TO_CPU); -+EXPORT_SYMBOL(DWC_BE32_TO_CPU); -+EXPORT_SYMBOL(DWC_CPU_TO_LE16); -+EXPORT_SYMBOL(DWC_CPU_TO_BE16); -+EXPORT_SYMBOL(DWC_LE16_TO_CPU); -+EXPORT_SYMBOL(DWC_BE16_TO_CPU); -+EXPORT_SYMBOL(DWC_READ_REG32); -+EXPORT_SYMBOL(DWC_WRITE_REG32); -+EXPORT_SYMBOL(DWC_MODIFY_REG32); -+ -+#if 0 -+EXPORT_SYMBOL(DWC_READ_REG64); -+EXPORT_SYMBOL(DWC_WRITE_REG64); -+EXPORT_SYMBOL(DWC_MODIFY_REG64); -+#endif -+ -+EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC); -+EXPORT_SYMBOL(DWC_SPINLOCK_FREE); -+EXPORT_SYMBOL(DWC_SPINLOCK); -+EXPORT_SYMBOL(DWC_SPINUNLOCK); -+EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE); -+EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE); -+EXPORT_SYMBOL(DWC_MUTEX_ALLOC); -+ -+#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES)) -+EXPORT_SYMBOL(DWC_MUTEX_FREE); -+#endif -+ -+EXPORT_SYMBOL(DWC_MUTEX_LOCK); -+EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK); -+EXPORT_SYMBOL(DWC_MUTEX_UNLOCK); -+EXPORT_SYMBOL(DWC_UDELAY); -+EXPORT_SYMBOL(DWC_MDELAY); -+EXPORT_SYMBOL(DWC_MSLEEP); -+EXPORT_SYMBOL(DWC_TIME); -+EXPORT_SYMBOL(DWC_TIMER_ALLOC); -+EXPORT_SYMBOL(DWC_TIMER_FREE); -+EXPORT_SYMBOL(DWC_TIMER_SCHEDULE); -+EXPORT_SYMBOL(DWC_TIMER_CANCEL); -+EXPORT_SYMBOL(DWC_WAITQ_ALLOC); -+EXPORT_SYMBOL(DWC_WAITQ_FREE); -+EXPORT_SYMBOL(DWC_WAITQ_WAIT); -+EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT); -+EXPORT_SYMBOL(DWC_WAITQ_TRIGGER); -+EXPORT_SYMBOL(DWC_WAITQ_ABORT); -+EXPORT_SYMBOL(DWC_THREAD_RUN); -+EXPORT_SYMBOL(DWC_THREAD_STOP); -+EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP); -+EXPORT_SYMBOL(DWC_TASK_ALLOC); -+EXPORT_SYMBOL(DWC_TASK_FREE); -+EXPORT_SYMBOL(DWC_TASK_SCHEDULE); -+EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE); -+EXPORT_SYMBOL(DWC_WORKQ_ALLOC); -+EXPORT_SYMBOL(DWC_WORKQ_FREE); -+EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE); -+EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED); -+EXPORT_SYMBOL(DWC_WORKQ_PENDING); -+ -+static int dwc_common_port_init_module(void) -+{ -+ int result = 0; -+ -+ printk(KERN_DEBUG "Module dwc_common_port init\n" ); -+ -+#ifdef DWC_DEBUG_MEMORY -+ result = dwc_memory_debug_start(NULL); -+ if (result) { -+ printk(KERN_ERR -+ "dwc_memory_debug_start() failed with error %d\n", -+ result); -+ return result; -+ } -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+ result = dwc_alloc_notification_manager(NULL, NULL); -+ if (result) { -+ printk(KERN_ERR -+ "dwc_alloc_notification_manager() failed with error %d\n", -+ result); -+ return result; -+ } -+#endif -+ return result; -+} -+ -+static void dwc_common_port_exit_module(void) -+{ -+ printk(KERN_DEBUG "Module dwc_common_port exit\n" ); -+ -+#ifdef DWC_NOTIFYLIB -+ dwc_free_notification_manager(); -+#endif -+ -+#ifdef DWC_DEBUG_MEMORY -+ dwc_memory_debug_stop(); -+#endif -+} -+ -+module_init(dwc_common_port_init_module); -+module_exit(dwc_common_port_exit_module); -+ -+MODULE_DESCRIPTION("DWC Common Library - Portable version"); -+MODULE_AUTHOR("Synopsys Inc."); -+MODULE_LICENSE ("GPL"); -+ -+#endif /* DWC_LIBMODULE */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c -@@ -0,0 +1,1275 @@ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+#ifdef DWC_CCLIB -+# include "dwc_cc.h" -+#endif -+ -+#ifdef DWC_CRYPTOLIB -+# include "dwc_modpow.h" -+# include "dwc_dh.h" -+# include "dwc_crypto.h" -+#endif -+ -+#ifdef DWC_NOTIFYLIB -+# include "dwc_notifier.h" -+#endif -+ -+/* OS-Level Implementations */ -+ -+/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */ -+ -+ -+/* MISC */ -+ -+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size) -+{ -+ return memset(dest, byte, size); -+} -+ -+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size) -+{ -+ return memcpy(dest, src, size); -+} -+ -+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size) -+{ -+ bcopy(src, dest, size); -+ return dest; -+} -+ -+int DWC_MEMCMP(void *m1, void *m2, uint32_t size) -+{ -+ return memcmp(m1, m2, size); -+} -+ -+int DWC_STRNCMP(void *s1, void *s2, uint32_t size) -+{ -+ return strncmp(s1, s2, size); -+} -+ -+int DWC_STRCMP(void *s1, void *s2) -+{ -+ return strcmp(s1, s2); -+} -+ -+int DWC_STRLEN(char const *str) -+{ -+ return strlen(str); -+} -+ -+char *DWC_STRCPY(char *to, char const *from) -+{ -+ return strcpy(to, from); -+} -+ -+char *DWC_STRDUP(char const *str) -+{ -+ int len = DWC_STRLEN(str) + 1; -+ char *new = DWC_ALLOC_ATOMIC(len); -+ -+ if (!new) { -+ return NULL; -+ } -+ -+ DWC_MEMCPY(new, str, len); -+ return new; -+} -+ -+int DWC_ATOI(char *str, int32_t *value) -+{ -+ char *end = NULL; -+ -+ /* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul' -+ * should be equivalent on 2's complement machines -+ */ -+ *value = strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+int DWC_ATOUI(char *str, uint32_t *value) -+{ -+ char *end = NULL; -+ -+ *value = strtoul(str, &end, 0); -+ if (*end == '\0') { -+ return 0; -+ } -+ -+ return -1; -+} -+ -+ -+#ifdef DWC_UTFLIB -+/* From usbstring.c */ -+ -+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+ -+#endif /* DWC_UTFLIB */ -+ -+ -+/* dwc_debug.h */ -+ -+dwc_bool_t DWC_IN_IRQ(void) -+{ -+// return in_irq(); -+ return 0; -+} -+ -+dwc_bool_t DWC_IN_BH(void) -+{ -+// return in_softirq(); -+ return 0; -+} -+ -+void DWC_VPRINTF(char *format, va_list args) -+{ -+ vprintf(format, args); -+} -+ -+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args) -+{ -+ return vsnprintf(str, size, format, args); -+} -+ -+void DWC_PRINTF(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+int DWC_SPRINTF(char *buffer, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsprintf(buffer, format, args); -+ va_end(args); -+ return retval; -+} -+ -+int DWC_SNPRINTF(char *buffer, int size, char *format, ...) -+{ -+ int retval; -+ va_list args; -+ -+ va_start(args, format); -+ retval = vsnprintf(buffer, size, format, args); -+ va_end(args); -+ return retval; -+} -+ -+void __DWC_WARN(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void __DWC_ERROR(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+ -+void DWC_EXCEPTION(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+// BUG_ON(1); ??? -+} -+ -+#ifdef DEBUG -+void __DWC_DEBUG(char *format, ...) -+{ -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VPRINTF(format, args); -+ va_end(args); -+} -+#endif -+ -+ -+/* dwc_mem.h */ -+ -+#if 0 -+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, -+ uint32_t align, -+ uint32_t alloc) -+{ -+ struct dma_pool *pool = dma_pool_create("Pool", NULL, -+ size, align, alloc); -+ return (dwc_pool_t *)pool; -+} -+ -+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool) -+{ -+ dma_pool_destroy((struct dma_pool *)pool); -+} -+ -+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr); -+ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr); -+} -+ -+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr) -+{ -+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr); -+ memset(..); -+} -+ -+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr) -+{ -+ dma_pool_free(pool, vaddr, daddr); -+} -+#endif -+ -+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ int error; -+ -+ error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs, -+ sizeof(dma->segs) / sizeof(dma->segs[0]), -+ &dma->nsegs, BUS_DMA_NOWAIT); -+ if (error) { -+ printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__, -+ (uintmax_t)size, error); -+ goto fail_0; -+ } -+ -+ error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size, -+ (caddr_t *)&dma->dma_vaddr, -+ BUS_DMA_NOWAIT | BUS_DMA_COHERENT); -+ if (error) { -+ printf("%s: bus_dmamem_map failed: %d\n", __func__, error); -+ goto fail_1; -+ } -+ -+ error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0, -+ BUS_DMA_NOWAIT, &dma->dma_map); -+ if (error) { -+ printf("%s: bus_dmamap_create failed: %d\n", __func__, error); -+ goto fail_2; -+ } -+ -+ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, -+ size, NULL, BUS_DMA_NOWAIT); -+ if (error) { -+ printf("%s: bus_dmamap_load failed: %d\n", __func__, error); -+ goto fail_3; -+ } -+ -+ dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr; -+ *dma_addr = dma->dma_paddr; -+ return dma->dma_vaddr; -+ -+fail_3: -+ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); -+fail_2: -+ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); -+fail_1: -+ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); -+fail_0: -+ dma->dma_map = NULL; -+ dma->dma_vaddr = NULL; -+ dma->nsegs = 0; -+ -+ return NULL; -+} -+ -+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr) -+{ -+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx; -+ -+ if (dma->dma_map != NULL) { -+ bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size, -+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); -+ bus_dmamap_unload(dma->dma_tag, dma->dma_map); -+ bus_dmamap_destroy(dma->dma_tag, dma->dma_map); -+ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size); -+ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs); -+ dma->dma_paddr = 0; -+ dma->dma_map = NULL; -+ dma->dma_vaddr = NULL; -+ dma->nsegs = 0; -+ } -+} -+ -+void *__DWC_ALLOC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO); -+} -+ -+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size) -+{ -+ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO); -+} -+ -+void __DWC_FREE(void *mem_ctx, void *addr) -+{ -+ free(addr, M_DEVBUF); -+} -+ -+ -+#ifdef DWC_CRYPTOLIB -+/* dwc_crypto.h */ -+ -+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length) -+{ -+ get_random_bytes(buffer, length); -+} -+ -+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out) -+{ -+ struct crypto_blkcipher *tfm; -+ struct blkcipher_desc desc; -+ struct scatterlist sgd; -+ struct scatterlist sgs; -+ -+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); -+ if (tfm == NULL) { -+ printk("failed to load transform for aes CBC\n"); -+ return -1; -+ } -+ -+ crypto_blkcipher_setkey(tfm, key, keylen); -+ crypto_blkcipher_set_iv(tfm, iv, 16); -+ -+ sg_init_one(&sgd, out, messagelen); -+ sg_init_one(&sgs, message, messagelen); -+ -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) { -+ crypto_free_blkcipher(tfm); -+ DWC_ERROR("AES CBC encryption failed"); -+ return -1; -+ } -+ -+ crypto_free_blkcipher(tfm); -+ return 0; -+} -+ -+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, len); -+ crypto_hash_digest(&desc, &sg, len, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, uint8_t *out) -+{ -+ struct crypto_hash *tfm; -+ struct hash_desc desc; -+ struct scatterlist sg; -+ -+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC); -+ if (IS_ERR(tfm)) { -+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm)); -+ return 0; -+ } -+ desc.tfm = tfm; -+ desc.flags = 0; -+ -+ sg_init_one(&sg, message, messagelen); -+ crypto_hash_setkey(tfm, key, keylen); -+ crypto_hash_digest(&desc, &sg, messagelen, out); -+ crypto_free_hash(tfm); -+ -+ return 1; -+} -+ -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/* Byte Ordering Conversions */ -+ -+uint32_t DWC_CPU_TO_LE32(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_CPU_TO_BE32(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_LE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint32_t DWC_BE32_TO_CPU(uint32_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ -+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_LE16(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_CPU_TO_BE16(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_LE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __LITTLE_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+uint16_t DWC_BE16_TO_CPU(uint16_t *p) -+{ -+#ifdef __BIG_ENDIAN -+ return *p; -+#else -+ uint8_t *u_p = (uint8_t *)p; -+ return (u_p[1] | (u_p[0] << 8)); -+#endif -+} -+ -+ -+/* Registers */ -+ -+uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_4(io->iot, io->ioh, ior); -+} -+ -+#if 0 -+uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ return bus_space_read_8(io->iot, io->ioh, ior); -+} -+#endif -+ -+void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, value); -+} -+ -+#if 0 -+void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, value); -+} -+#endif -+ -+void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, -+ uint32_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_4(io->iot, io->ioh, ior, -+ (bus_space_read_4(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+ -+#if 0 -+void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, -+ uint64_t set_mask) -+{ -+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx; -+ bus_size_t ior = (bus_size_t)reg; -+ -+ bus_space_write_8(io->iot, io->ioh, ior, -+ (bus_space_read_8(io->iot, io->ioh, ior) & -+ ~clear_mask) | set_mask); -+} -+#endif -+ -+ -+/* Locking */ -+ -+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void) -+{ -+ struct simplelock *sl = DWC_ALLOC(sizeof(*sl)); -+ -+ if (!sl) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ return NULL; -+ } -+ -+ simple_lock_init(sl); -+ return (dwc_spinlock_t *)sl; -+} -+ -+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock) -+{ -+ struct simplelock *sl = (struct simplelock *)lock; -+ -+ DWC_FREE(sl); -+} -+ -+void DWC_SPINLOCK(dwc_spinlock_t *lock) -+{ -+ simple_lock((struct simplelock *)lock); -+} -+ -+void DWC_SPINUNLOCK(dwc_spinlock_t *lock) -+{ -+ simple_unlock((struct simplelock *)lock); -+} -+ -+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags) -+{ -+ simple_lock((struct simplelock *)lock); -+ *flags = splbio(); -+} -+ -+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags) -+{ -+ splx(flags); -+ simple_unlock((struct simplelock *)lock); -+} -+ -+dwc_mutex_t *DWC_MUTEX_ALLOC(void) -+{ -+ dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock)); -+ -+ if (!mutex) { -+ DWC_ERROR("Cannot allocate memory for mutex"); -+ return NULL; -+ } -+ -+ lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0); -+ return mutex; -+} -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)) -+#else -+void DWC_MUTEX_FREE(dwc_mutex_t *mutex) -+{ -+ DWC_FREE(mutex); -+} -+#endif -+ -+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex) -+{ -+ lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL); -+} -+ -+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex) -+{ -+ int status; -+ -+ status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL); -+ return status == 0; -+} -+ -+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex) -+{ -+ lockmgr((struct lock *)mutex, LK_RELEASE, NULL); -+} -+ -+ -+/* Timing */ -+ -+void DWC_UDELAY(uint32_t usecs) -+{ -+ DELAY(usecs); -+} -+ -+void DWC_MDELAY(uint32_t msecs) -+{ -+ do { -+ DELAY(1000); -+ } while (--msecs); -+} -+ -+void DWC_MSLEEP(uint32_t msecs) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ tsleep(&tv, 0, "dw3slp", tvtohz(&tv)); -+} -+ -+uint32_t DWC_TIME(void) -+{ -+ struct timeval tv; -+ -+ microuptime(&tv); // or getmicrouptime? (less precise, but faster) -+ return tv.tv_sec * 1000 + tv.tv_usec / 1000; -+} -+ -+ -+/* Timers */ -+ -+struct dwc_timer { -+ struct callout t; -+ char *name; -+ dwc_spinlock_t *lock; -+ dwc_timer_callback_t cb; -+ void *data; -+}; -+ -+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data) -+{ -+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t)); -+ -+ if (!t) { -+ DWC_ERROR("Cannot allocate memory for timer"); -+ return NULL; -+ } -+ -+ callout_init(&t->t); -+ -+ t->name = DWC_STRDUP(name); -+ if (!t->name) { -+ DWC_ERROR("Cannot allocate memory for timer->name"); -+ goto no_name; -+ } -+ -+ t->lock = DWC_SPINLOCK_ALLOC(); -+ if (!t->lock) { -+ DWC_ERROR("Cannot allocate memory for timer->lock"); -+ goto no_lock; -+ } -+ -+ t->cb = cb; -+ t->data = data; -+ -+ return t; -+ -+ no_lock: -+ DWC_FREE(t->name); -+ no_name: -+ DWC_FREE(t); -+ -+ return NULL; -+} -+ -+void DWC_TIMER_FREE(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+ DWC_SPINLOCK_FREE(timer->lock); -+ DWC_FREE(timer->name); -+ DWC_FREE(timer); -+} -+ -+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time) -+{ -+ struct timeval tv; -+ -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data); -+} -+ -+void DWC_TIMER_CANCEL(dwc_timer_t *timer) -+{ -+ callout_stop(&timer->t); -+} -+ -+ -+/* Wait Queues */ -+ -+struct dwc_waitq { -+ struct simplelock lock; -+ int abort; -+}; -+ -+dwc_waitq_t *DWC_WAITQ_ALLOC(void) -+{ -+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ return NULL; -+ } -+ -+ simple_lock_init(&wq->lock); -+ wq->abort = 0; -+ -+ return wq; -+} -+ -+void DWC_WAITQ_FREE(dwc_waitq_t *wq) -+{ -+ DWC_FREE(wq); -+} -+ -+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data) -+{ -+ int ipl; -+ int result = 0; -+ -+ simple_lock(&wq->lock); -+ ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+ splx(ipl); -+ result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout -+ ipl = splbio(); -+ } -+ -+ if (result == 0) { // awoken -+ if (wq->abort) { -+ wq->abort = 0; -+ result = -DWC_E_ABORT; -+ } else { -+ result = 0; -+ } -+ -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ } else { -+ wq->abort = 0; -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ -+ if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ } else { // signaled - must be EINTR -+ result = -DWC_E_ABORT; -+ } -+ } -+ -+ return result; -+} -+ -+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs) -+{ -+ struct timeval tv, tv1, tv2; -+ int ipl; -+ int result = 0; -+ -+ tv.tv_sec = msecs / 1000; -+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000; -+ -+ simple_lock(&wq->lock); -+ ipl = splbio(); -+ -+ /* Skip the sleep if already aborted or triggered */ -+ if (!wq->abort && !cond(data)) { -+ splx(ipl); -+ getmicrouptime(&tv1); -+ result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock); -+ getmicrouptime(&tv2); -+ ipl = splbio(); -+ } -+ -+ if (result == 0) { // awoken -+ if (wq->abort) { -+ wq->abort = 0; -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ result = -DWC_E_ABORT; -+ } else { -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ -+ tv2.tv_usec -= tv1.tv_usec; -+ if (tv2.tv_usec < 0) { -+ tv2.tv_usec += 1000000; -+ tv2.tv_sec--; -+ } -+ -+ tv2.tv_sec -= tv1.tv_sec; -+ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000; -+ result = msecs - result; -+ if (result <= 0) -+ result = 1; -+ } -+ } else { -+ wq->abort = 0; -+ splx(ipl); -+ simple_unlock(&wq->lock); -+ -+ if (result == ERESTART) { // signaled - restart -+ result = -DWC_E_RESTART; -+ -+ } else if (result == EINTR) { // signaled - interrupt -+ result = -DWC_E_ABORT; -+ -+ } else { // timed out -+ result = -DWC_E_TIMEOUT; -+ } -+ } -+ -+ return result; -+} -+ -+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq) -+{ -+ wakeup(wq); -+} -+ -+void DWC_WAITQ_ABORT(dwc_waitq_t *wq) -+{ -+ int ipl; -+ -+ simple_lock(&wq->lock); -+ ipl = splbio(); -+ wq->abort = 1; -+ wakeup(wq); -+ splx(ipl); -+ simple_unlock(&wq->lock); -+} -+ -+ -+/* Threading */ -+ -+struct dwc_thread { -+ struct proc *proc; -+ int abort; -+}; -+ -+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data) -+{ -+ int retval; -+ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread)); -+ -+ if (!thread) { -+ return NULL; -+ } -+ -+ thread->abort = 0; -+ retval = kthread_create1((void (*)(void *))func, data, &thread->proc, -+ "%s", name); -+ if (retval) { -+ DWC_FREE(thread); -+ return NULL; -+ } -+ -+ return thread; -+} -+ -+int DWC_THREAD_STOP(dwc_thread_t *thread) -+{ -+ int retval; -+ -+ thread->abort = 1; -+ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz); -+ -+ if (retval == 0) { -+ /* DWC_THREAD_EXIT() will free the thread struct */ -+ return 0; -+ } -+ -+ /* NOTE: We leak the thread struct if thread doesn't die */ -+ -+ if (retval == EWOULDBLOCK) { -+ return -DWC_E_TIMEOUT; -+ } -+ -+ return -DWC_E_UNKNOWN; -+} -+ -+dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread) -+{ -+ return thread->abort; -+} -+ -+void DWC_THREAD_EXIT(dwc_thread_t *thread) -+{ -+ wakeup(&thread->abort); -+ DWC_FREE(thread); -+ kthread_exit(0); -+} -+ -+/* tasklets -+ - Runs in interrupt context (cannot sleep) -+ - Each tasklet runs on a single CPU -+ - Different tasklets can be running simultaneously on different CPUs -+ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom- -+ halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ] -+ */ -+struct dwc_tasklet { -+ dwc_tasklet_callback_t cb; -+ void *data; -+}; -+ -+static void tasklet_callback(void *data) -+{ -+ dwc_tasklet_t *task = (dwc_tasklet_t *)data; -+ -+ task->cb(task->data); -+} -+ -+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data) -+{ -+ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task)); -+ -+ if (task) { -+ task->cb = cb; -+ task->data = data; -+ } else { -+ DWC_ERROR("Cannot allocate memory for tasklet"); -+ } -+ -+ return task; -+} -+ -+void DWC_TASK_FREE(dwc_tasklet_t *task) -+{ -+ DWC_FREE(task); -+} -+ -+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task) -+{ -+ tasklet_callback(task); -+} -+ -+ -+/* workqueues -+ - Runs in process context (can sleep) -+ */ -+typedef struct work_container { -+ dwc_work_callback_t cb; -+ void *data; -+ dwc_workq_t *wq; -+ char *name; -+ int hz; -+ struct work task; -+} work_container_t; -+ -+struct dwc_workq { -+ struct workqueue *taskq; -+ dwc_spinlock_t *lock; -+ dwc_waitq_t *waitq; -+ int pending; -+ struct work_container *container; -+}; -+ -+static void do_work(struct work *task, void *data) -+{ -+ dwc_workq_t *wq = (dwc_workq_t *)data; -+ work_container_t *container = wq->container; -+ dwc_irqflags_t flags; -+ -+ if (container->hz) { -+ tsleep(container, 0, "dw3wrk", container->hz); -+ } -+ -+ container->cb(container->data); -+ DWC_DEBUG("Work done: %s, container=%p", container->name, container); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ if (container->name) -+ DWC_FREE(container->name); -+ DWC_FREE(container); -+ wq->pending--; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+} -+ -+static int work_done(void *data) -+{ -+ dwc_workq_t *workq = (dwc_workq_t *)data; -+ -+ return workq->pending == 0; -+} -+ -+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout) -+{ -+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout); -+} -+ -+dwc_workq_t *DWC_WORKQ_ALLOC(char *name) -+{ -+ int result; -+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq)); -+ -+ if (!wq) { -+ DWC_ERROR("Cannot allocate memory for workqueue"); -+ return NULL; -+ } -+ -+ result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/, -+ IPL_BIO, 0); -+ if (result) { -+ DWC_ERROR("Cannot create workqueue"); -+ goto no_taskq; -+ } -+ -+ wq->pending = 0; -+ -+ wq->lock = DWC_SPINLOCK_ALLOC(); -+ if (!wq->lock) { -+ DWC_ERROR("Cannot allocate memory for spinlock"); -+ goto no_lock; -+ } -+ -+ wq->waitq = DWC_WAITQ_ALLOC(); -+ if (!wq->waitq) { -+ DWC_ERROR("Cannot allocate memory for waitqueue"); -+ goto no_waitq; -+ } -+ -+ return wq; -+ -+ no_waitq: -+ DWC_SPINLOCK_FREE(wq->lock); -+ no_lock: -+ workqueue_destroy(wq->taskq); -+ no_taskq: -+ DWC_FREE(wq); -+ -+ return NULL; -+} -+ -+void DWC_WORKQ_FREE(dwc_workq_t *wq) -+{ -+#ifdef DEBUG -+ dwc_irqflags_t flags; -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ -+ if (wq->pending != 0) { -+ struct work_container *container = wq->container; -+ -+ DWC_ERROR("Destroying work queue with pending work"); -+ -+ if (container && container->name) { -+ DWC_ERROR("Work %s still pending", container->name); -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+#endif -+ DWC_WAITQ_FREE(wq->waitq); -+ DWC_SPINLOCK_FREE(wq->lock); -+ workqueue_destroy(wq->taskq); -+ DWC_FREE(wq); -+} -+ -+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data, -+ char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ container->hz = 0; -+ wq->container = container; -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ workqueue_enqueue(wq->taskq, &container->task); -+} -+ -+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+{ -+ dwc_irqflags_t flags; -+ work_container_t *container; -+ static char name[128]; -+ struct timeval tv; -+ va_list args; -+ -+ va_start(args, format); -+ DWC_VSNPRINTF(name, 128, format, args); -+ va_end(args); -+ -+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags); -+ wq->pending++; -+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags); -+ DWC_WAITQ_TRIGGER(wq->waitq); -+ -+ container = DWC_ALLOC_ATOMIC(sizeof(*container)); -+ if (!container) { -+ DWC_ERROR("Cannot allocate memory for container"); -+ return; -+ } -+ -+ container->name = DWC_STRDUP(name); -+ if (!container->name) { -+ DWC_ERROR("Cannot allocate memory for container->name"); -+ DWC_FREE(container); -+ return; -+ } -+ -+ container->cb = cb; -+ container->data = data; -+ container->wq = wq; -+ tv.tv_sec = time / 1000; -+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000; -+ container->hz = tvtohz(&tv); -+ wq->container = container; -+ -+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container); -+ workqueue_enqueue(wq->taskq, &container->task); -+} -+ -+int DWC_WORKQ_PENDING(dwc_workq_t *wq) -+{ -+ return wq->pending; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c -@@ -0,0 +1,308 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $ -+ * $Revision: #5 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+ -+/** @file -+ * This file contains the WUSB cryptographic routines. -+ */ -+ -+#ifdef DWC_CRYPTOLIB -+ -+#include "dwc_crypto.h" -+#include "usb.h" -+ -+#ifdef DEBUG -+static inline void dump_bytes(char *name, uint8_t *bytes, int len) -+{ -+ int i; -+ DWC_PRINTF("%s: ", name); -+ for (i=0; i<len; i++) { -+ DWC_PRINTF("%02x ", bytes[i]); -+ } -+ DWC_PRINTF("\n"); -+} -+#else -+#define dump_bytes(x...) -+#endif -+ -+/* Display a block */ -+void show_block(const u8 *blk, const char *prefix, const char *suffix, int a) -+{ -+#ifdef DWC_DEBUG_CRYPTO -+ int i, blksize = 16; -+ -+ DWC_DEBUG("%s", prefix); -+ -+ if (suffix == NULL) { -+ suffix = "\n"; -+ blksize = a; -+ } -+ -+ for (i = 0; i < blksize; i++) -+ DWC_PRINT("%02x%s", *blk++, ((i & 3) == 3) ? " " : " "); -+ DWC_PRINT(suffix); -+#endif -+} -+ -+/** -+ * Encrypts an array of bytes using the AES encryption engine. -+ * If <code>dst</code> == <code>src</code>, then the bytes will be encrypted -+ * in-place. -+ * -+ * @return 0 on success, negative error code on error. -+ */ -+int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst) -+{ -+ u8 block_t[16]; -+ DWC_MEMSET(block_t, 0, 16); -+ -+ return DWC_AES_CBC(src, 16, key, 16, block_t, dst); -+} -+ -+/** -+ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec. -+ * This function takes a data string and returns the encrypted CBC -+ * Counter-mode MIC. -+ * -+ * @param key The 128-bit symmetric key. -+ * @param nonce The CCM nonce. -+ * @param label The unique 14-byte ASCII text label. -+ * @param bytes The byte array to be encrypted. -+ * @param len Length of the byte array. -+ * @param result Byte array to receive the 8-byte encrypted MIC. -+ */ -+void dwc_wusb_cmf(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ u8 block_m[16]; -+ u8 block_x[16]; -+ u8 block_t[8]; -+ int idx, blkNum; -+ u16 la = (u16)(len + 14); -+ -+ /* Set the AES-128 key */ -+ //dwc_aes_setkey(tfm, key, 16); -+ -+ /* Fill block B0 from flags = 0x59, N, and l(m) = 0 */ -+ block_m[0] = 0x59; -+ for (idx = 0; idx < 13; idx++) -+ block_m[idx + 1] = nonce[idx]; -+ block_m[14] = 0; -+ block_m[15] = 0; -+ -+ /* Produce the CBC IV */ -+ dwc_wusb_aes_encrypt(block_m, key, block_x); -+ show_block(block_m, "CBC IV in: ", "\n", 0); -+ show_block(block_x, "CBC IV out:", "\n", 0); -+ -+ /* Fill block B1 from l(a) = Blen + 14, and A */ -+ block_x[0] ^= (u8)(la >> 8); -+ block_x[1] ^= (u8)la; -+ for (idx = 0; idx < 14; idx++) -+ block_x[idx + 2] ^= label[idx]; -+ show_block(block_x, "After xor: ", "b1\n", 16); -+ -+ dwc_wusb_aes_encrypt(block_x, key, block_x); -+ show_block(block_x, "After AES: ", "b1\n", 16); -+ -+ idx = 0; -+ blkNum = 0; -+ -+ /* Fill remaining blocks with B */ -+ while (len-- > 0) { -+ block_x[idx] ^= *bytes++; -+ if (++idx >= 16) { -+ idx = 0; -+ show_block(block_x, "After xor: ", "\n", blkNum); -+ dwc_wusb_aes_encrypt(block_x, key, block_x); -+ show_block(block_x, "After AES: ", "\n", blkNum); -+ blkNum++; -+ } -+ } -+ -+ /* Handle partial last block */ -+ if (idx > 0) { -+ show_block(block_x, "After xor: ", "\n", blkNum); -+ dwc_wusb_aes_encrypt(block_x, key, block_x); -+ show_block(block_x, "After AES: ", "\n", blkNum); -+ } -+ -+ /* Save the MIC tag */ -+ DWC_MEMCPY(block_t, block_x, 8); -+ show_block(block_t, "MIC tag : ", NULL, 8); -+ -+ /* Fill block A0 from flags = 0x01, N, and counter = 0 */ -+ block_m[0] = 0x01; -+ block_m[14] = 0; -+ block_m[15] = 0; -+ -+ /* Encrypt the counter */ -+ dwc_wusb_aes_encrypt(block_m, key, block_x); -+ show_block(block_x, "CTR[MIC] : ", NULL, 8); -+ -+ /* XOR with MIC tag */ -+ for (idx = 0; idx < 8; idx++) { -+ block_t[idx] ^= block_x[idx]; -+ } -+ -+ /* Return result to caller */ -+ DWC_MEMCPY(result, block_t, 8); -+ show_block(result, "CCM-MIC : ", NULL, 8); -+ -+} -+ -+/** -+ * The PRF function described in section 6.5 of the WUSB spec. This function -+ * concatenates MIC values returned from dwc_cmf() to create a value of -+ * the requested length. -+ * -+ * @param prf_len Length of the PRF function in bits (64, 128, or 256). -+ * @param key, nonce, label, bytes, len Same as for dwc_cmf(). -+ * @param result Byte array to receive the result. -+ */ -+void dwc_wusb_prf(int prf_len, u8 *key, -+ u8 *nonce, char *label, u8 *bytes, int len, u8 *result) -+{ -+ int i; -+ -+ nonce[0] = 0; -+ for (i = 0; i < prf_len >> 6; i++, nonce[0]++) { -+ dwc_wusb_cmf(key, nonce, label, bytes, len, result); -+ result += 8; -+ } -+} -+ -+/** -+ * Fills in CCM Nonce per the WUSB spec. -+ * -+ * @param[in] haddr Host address. -+ * @param[in] daddr Device address. -+ * @param[in] tkid Session Key(PTK) identifier. -+ * @param[out] nonce Pointer to where the CCM Nonce output is to be written. -+ */ -+void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, -+ uint8_t *nonce) -+{ -+ -+ DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr); -+ -+ DWC_MEMSET(&nonce[0], 0, 16); -+ -+ DWC_MEMCPY(&nonce[6], tkid, 3); -+ nonce[9] = daddr & 0xFF; -+ nonce[10] = (daddr >> 8) & 0xFF; -+ nonce[11] = haddr & 0xFF; -+ nonce[12] = (haddr >> 8) & 0xFF; -+ -+ dump_bytes("CCM nonce", nonce, 16); -+} -+ -+/** -+ * Generates a 16-byte cryptographic-grade random number for the Host/Device -+ * Nonce. -+ */ -+void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce) -+{ -+ uint8_t inonce[16]; -+ uint32_t temp[4]; -+ -+ /* Fill in the Nonce */ -+ DWC_MEMSET(&inonce[0], 0, sizeof(inonce)); -+ inonce[9] = addr & 0xFF; -+ inonce[10] = (addr >> 8) & 0xFF; -+ inonce[11] = inonce[9]; -+ inonce[12] = inonce[10]; -+ -+ /* Collect "randomness samples" */ -+ DWC_RANDOM_BYTES((uint8_t *)temp, 16); -+ -+ dwc_wusb_prf_128((uint8_t *)temp, nonce, -+ "Random Numbers", (uint8_t *)temp, sizeof(temp), -+ nonce); -+} -+ -+/** -+ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the -+ * WUSB spec. -+ * -+ * @param[in] ccm_nonce Pointer to CCM Nonce. -+ * @param[in] mk Master Key to derive the session from -+ * @param[in] hnonce Pointer to Host Nonce. -+ * @param[in] dnonce Pointer to Device Nonce. -+ * @param[out] kck Pointer to where the KCK output is to be written. -+ * @param[out] ptk Pointer to where the PTK output is to be written. -+ */ -+void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce, -+ uint8_t *dnonce, uint8_t *kck, uint8_t *ptk) -+{ -+ uint8_t idata[32]; -+ uint8_t odata[32]; -+ -+ dump_bytes("ck", mk, 16); -+ dump_bytes("hnonce", hnonce, 16); -+ dump_bytes("dnonce", dnonce, 16); -+ -+ /* The data is the HNonce and DNonce concatenated */ -+ DWC_MEMCPY(&idata[0], hnonce, 16); -+ DWC_MEMCPY(&idata[16], dnonce, 16); -+ -+ dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata); -+ -+ /* Low 16 bytes of the result is the KCK, high 16 is the PTK */ -+ DWC_MEMCPY(kck, &odata[0], 16); -+ DWC_MEMCPY(ptk, &odata[16], 16); -+ -+ dump_bytes("kck", kck, 16); -+ dump_bytes("ptk", ptk, 16); -+} -+ -+/** -+ * Generates the Message Integrity Code over the Handshake data per the -+ * WUSB spec. -+ * -+ * @param ccm_nonce Pointer to CCM Nonce. -+ * @param kck Pointer to Key Confirmation Key. -+ * @param data Pointer to Handshake data to be checked. -+ * @param mic Pointer to where the MIC output is to be written. -+ */ -+void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck, -+ uint8_t *data, uint8_t *mic) -+{ -+ -+ dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC", -+ data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic); -+} -+ -+#endif /* DWC_CRYPTOLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h -@@ -0,0 +1,111 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $ -+ * $Revision: #3 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+ -+#ifndef _DWC_CRYPTO_H_ -+#define _DWC_CRYPTO_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * This file contains declarations for the WUSB Cryptographic routines as -+ * defined in the WUSB spec. They are only to be used internally by the DWC UWB -+ * modules. -+ */ -+ -+#include "dwc_os.h" -+ -+int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst); -+ -+void dwc_wusb_cmf(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result); -+void dwc_wusb_prf(int prf_len, u8 *key, -+ u8 *nonce, char *label, u8 *bytes, int len, u8 *result); -+ -+/** -+ * The PRF-64 function described in section 6.5 of the WUSB spec. -+ * -+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). -+ */ -+static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ dwc_wusb_prf(64, key, nonce, label, bytes, len, result); -+} -+ -+/** -+ * The PRF-128 function described in section 6.5 of the WUSB spec. -+ * -+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). -+ */ -+static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ dwc_wusb_prf(128, key, nonce, label, bytes, len, result); -+} -+ -+/** -+ * The PRF-256 function described in section 6.5 of the WUSB spec. -+ * -+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf(). -+ */ -+static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce, -+ char *label, u8 *bytes, int len, u8 *result) -+{ -+ dwc_wusb_prf(256, key, nonce, label, bytes, len, result); -+} -+ -+ -+void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid, -+ uint8_t *nonce); -+void dwc_wusb_gen_nonce(uint16_t addr, -+ uint8_t *nonce); -+ -+void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, -+ uint8_t *hnonce, uint8_t *dnonce, -+ uint8_t *kck, uint8_t *ptk); -+ -+ -+void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t -+ *kck, uint8_t *data, uint8_t *mic); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_CRYPTO_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_dh.c -@@ -0,0 +1,291 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $ -+ * $Revision: #3 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifdef DWC_CRYPTOLIB -+ -+#ifndef CONFIG_MACH_IPMATE -+ -+#include "dwc_dh.h" -+#include "dwc_modpow.h" -+ -+#ifdef DEBUG -+/* This function prints out a buffer in the format described in the Association -+ * Model specification. */ -+static void dh_dump(char *str, void *_num, int len) -+{ -+ uint8_t *num = _num; -+ int i; -+ DWC_PRINTF("%s\n", str); -+ for (i = 0; i < len; i ++) { -+ DWC_PRINTF("%02x", num[i]); -+ if (((i + 1) % 2) == 0) DWC_PRINTF(" "); -+ if (((i + 1) % 26) == 0) DWC_PRINTF("\n"); -+ } -+ -+ DWC_PRINTF("\n"); -+} -+#else -+#define dh_dump(_x...) do {; } while(0) -+#endif -+ -+/* Constant g value */ -+static __u32 dh_g[] = { -+ 0x02000000, -+}; -+ -+/* Constant p value */ -+static __u32 dh_p[] = { -+ 0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A, -+ 0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2, -+ 0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4, -+ 0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1, -+ 0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520, -+ 0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E, -+ 0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895, -+ 0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004, -+ 0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6, -+ 0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9, -+ 0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA, -+ 0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF, -+}; -+ -+static void dh_swap_bytes(void *_in, void *_out, uint32_t len) -+{ -+ uint8_t *in = _in; -+ uint8_t *out = _out; -+ int i; -+ for (i=0; i<len; i++) { -+ out[i] = in[len-1-i]; -+ } -+} -+ -+/* Computes the modular exponentiation (num^exp % mod). num, exp, and mod are -+ * big endian numbers of size len, in bytes. Each len value must be a multiple -+ * of 4. */ -+int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len, -+ void *exp, uint32_t exp_len, -+ void *mod, uint32_t mod_len, -+ void *out) -+{ -+ /* modpow() takes little endian numbers. AM uses big-endian. This -+ * function swaps bytes of numbers before passing onto modpow. */ -+ -+ int retval = 0; -+ uint32_t *result; -+ -+ uint32_t *bignum_num = dwc_alloc(mem_ctx, num_len + 4); -+ uint32_t *bignum_exp = dwc_alloc(mem_ctx, exp_len + 4); -+ uint32_t *bignum_mod = dwc_alloc(mem_ctx, mod_len + 4); -+ -+ dh_swap_bytes(num, &bignum_num[1], num_len); -+ bignum_num[0] = num_len / 4; -+ -+ dh_swap_bytes(exp, &bignum_exp[1], exp_len); -+ bignum_exp[0] = exp_len / 4; -+ -+ dh_swap_bytes(mod, &bignum_mod[1], mod_len); -+ bignum_mod[0] = mod_len / 4; -+ -+ result = dwc_modpow(mem_ctx, bignum_num, bignum_exp, bignum_mod); -+ if (!result) { -+ retval = -1; -+ goto dh_modpow_nomem; -+ } -+ -+ dh_swap_bytes(&result[1], out, result[0] * 4); -+ dwc_free(mem_ctx, result); -+ -+ dh_modpow_nomem: -+ dwc_free(mem_ctx, bignum_num); -+ dwc_free(mem_ctx, bignum_exp); -+ dwc_free(mem_ctx, bignum_mod); -+ return retval; -+} -+ -+ -+int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pk, uint8_t *hash) -+{ -+ int retval; -+ uint8_t m3[385]; -+ -+#ifndef DH_TEST_VECTORS -+ DWC_RANDOM_BYTES(exp, 32); -+#endif -+ -+ /* Compute the pkd */ -+ if ((retval = dwc_dh_modpow(mem_ctx, dh_g, 4, -+ exp, 32, -+ dh_p, 384, pk))) { -+ return retval; -+ } -+ -+ m3[384] = nd; -+ DWC_MEMCPY(&m3[0], pk, 384); -+ DWC_SHA256(m3, 385, hash); -+ -+ dh_dump("PK", pk, 384); -+ dh_dump("SHA-256(M3)", hash, 32); -+ return 0; -+} -+ -+int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd, -+ uint8_t *exp, int is_host, -+ char *dd, uint8_t *ck, uint8_t *kdk) -+{ -+ int retval; -+ uint8_t mv[784]; -+ uint8_t sha_result[32]; -+ uint8_t dhkey[384]; -+ uint8_t shared_secret[384]; -+ char *message; -+ uint32_t vd; -+ -+ uint8_t *pk; -+ -+ if (is_host) { -+ pk = pkd; -+ } -+ else { -+ pk = pkh; -+ } -+ -+ if ((retval = dwc_dh_modpow(mem_ctx, pk, 384, -+ exp, 32, -+ dh_p, 384, shared_secret))) { -+ return retval; -+ } -+ dh_dump("Shared Secret", shared_secret, 384); -+ -+ DWC_SHA256(shared_secret, 384, dhkey); -+ dh_dump("DHKEY", dhkey, 384); -+ -+ DWC_MEMCPY(&mv[0], pkd, 384); -+ DWC_MEMCPY(&mv[384], pkh, 384); -+ DWC_MEMCPY(&mv[768], "displayed digest", 16); -+ dh_dump("MV", mv, 784); -+ -+ DWC_SHA256(mv, 784, sha_result); -+ dh_dump("SHA-256(MV)", sha_result, 32); -+ dh_dump("First 32-bits of SHA-256(MV)", sha_result, 4); -+ -+ dh_swap_bytes(sha_result, &vd, 4); -+#ifdef DEBUG -+ DWC_PRINTF("Vd (decimal) = %d\n", vd); -+#endif -+ -+ switch (nd) { -+ case 2: -+ vd = vd % 100; -+ DWC_SPRINTF(dd, "%02d", vd); -+ break; -+ case 3: -+ vd = vd % 1000; -+ DWC_SPRINTF(dd, "%03d", vd); -+ break; -+ case 4: -+ vd = vd % 10000; -+ DWC_SPRINTF(dd, "%04d", vd); -+ break; -+ } -+#ifdef DEBUG -+ DWC_PRINTF("Display Digits: %s\n", dd); -+#endif -+ -+ message = "connection key"; -+ DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result); -+ dh_dump("HMAC(SHA-256, DHKey, connection key)", sha_result, 32); -+ DWC_MEMCPY(ck, sha_result, 16); -+ -+ message = "key derivation key"; -+ DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result); -+ dh_dump("HMAC(SHA-256, DHKey, key derivation key)", sha_result, 32); -+ DWC_MEMCPY(kdk, sha_result, 32); -+ -+ return 0; -+} -+ -+ -+#ifdef DH_TEST_VECTORS -+ -+static __u8 dh_a[] = { -+ 0x44, 0x00, 0x51, 0xd6, -+ 0xf0, 0xb5, 0x5e, 0xa9, -+ 0x67, 0xab, 0x31, 0xc6, -+ 0x8a, 0x8b, 0x5e, 0x37, -+ 0xd9, 0x10, 0xda, 0xe0, -+ 0xe2, 0xd4, 0x59, 0xa4, -+ 0x86, 0x45, 0x9c, 0xaa, -+ 0xdf, 0x36, 0x75, 0x16, -+}; -+ -+static __u8 dh_b[] = { -+ 0x5d, 0xae, 0xc7, 0x86, -+ 0x79, 0x80, 0xa3, 0x24, -+ 0x8c, 0xe3, 0x57, 0x8f, -+ 0xc7, 0x5f, 0x1b, 0x0f, -+ 0x2d, 0xf8, 0x9d, 0x30, -+ 0x6f, 0xa4, 0x52, 0xcd, -+ 0xe0, 0x7a, 0x04, 0x8a, -+ 0xde, 0xd9, 0x26, 0x56, -+}; -+ -+void dwc_run_dh_test_vectors(void *mem_ctx) -+{ -+ uint8_t pkd[384]; -+ uint8_t pkh[384]; -+ uint8_t hashd[32]; -+ uint8_t hashh[32]; -+ uint8_t ck[16]; -+ uint8_t kdk[32]; -+ char dd[5]; -+ -+ DWC_PRINTF("\n\n\nDH_TEST_VECTORS\n\n"); -+ -+ /* compute the PKd and SHA-256(PKd || Nd) */ -+ DWC_PRINTF("Computing PKd\n"); -+ dwc_dh_pk(mem_ctx, 2, dh_a, pkd, hashd); -+ -+ /* compute the PKd and SHA-256(PKh || Nd) */ -+ DWC_PRINTF("Computing PKh\n"); -+ dwc_dh_pk(mem_ctx, 2, dh_b, pkh, hashh); -+ -+ /* compute the dhkey */ -+ dwc_dh_derive_keys(mem_ctx, 2, pkh, pkd, dh_a, 0, dd, ck, kdk); -+} -+#endif /* DH_TEST_VECTORS */ -+ -+#endif /* !CONFIG_MACH_IPMATE */ -+ -+#endif /* DWC_CRYPTOLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_dh.h -@@ -0,0 +1,106 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $ -+ * $Revision: #4 $ -+ * $Date: 2010/09/28 $ -+ * $Change: 1596182 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifndef _DWC_DH_H_ -+#define _DWC_DH_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include "dwc_os.h" -+ -+/** @file -+ * -+ * This file defines the common functions on device and host for performing -+ * numeric association as defined in the WUSB spec. They are only to be -+ * used internally by the DWC UWB modules. */ -+ -+extern int dwc_dh_sha256(uint8_t *message, uint32_t len, uint8_t *out); -+extern int dwc_dh_hmac_sha256(uint8_t *message, uint32_t messagelen, -+ uint8_t *key, uint32_t keylen, -+ uint8_t *out); -+extern int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len, -+ void *exp, uint32_t exp_len, -+ void *mod, uint32_t mod_len, -+ void *out); -+ -+/** Computes PKD or PKH, and SHA-256(PKd || Nd) -+ * -+ * PK = g^exp mod p. -+ * -+ * Input: -+ * Nd = Number of digits on the device. -+ * -+ * Output: -+ * exp = A 32-byte buffer to be filled with a randomly generated number. -+ * used as either A or B. -+ * pk = A 384-byte buffer to be filled with the PKH or PKD. -+ * hash = A 32-byte buffer to be filled with SHA-256(PK || ND). -+ */ -+extern int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pkd, uint8_t *hash); -+ -+/** Computes the DHKEY, and VD. -+ * -+ * If called from host, then it will comput DHKEY=PKD^exp % p. -+ * If called from device, then it will comput DHKEY=PKH^exp % p. -+ * -+ * Input: -+ * pkd = The PKD value. -+ * pkh = The PKH value. -+ * exp = The A value (if device) or B value (if host) generated in dwc_wudev_dh_pk. -+ * is_host = Set to non zero if a WUSB host is calling this function. -+ * -+ * Output: -+ -+ * dd = A pointer to an buffer to be set to the displayed digits string to be shown -+ * to the user. This buffer should be at 5 bytes long to hold 4 digits plus a -+ * null termination character. This buffer can be used directly for display. -+ * ck = A 16-byte buffer to be filled with the CK. -+ * kdk = A 32-byte buffer to be filled with the KDK. -+ */ -+extern int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd, -+ uint8_t *exp, int is_host, -+ char *dd, uint8_t *ck, uint8_t *kdk); -+ -+#ifdef DH_TEST_VECTORS -+extern void dwc_run_dh_test_vectors(void); -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_DH_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_list.h -@@ -0,0 +1,594 @@ -+/* $OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $ */ -+/* $NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $ */ -+ -+/* -+ * Copyright (c) 1991, 1993 -+ * The Regents of the University of California. All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. Neither the name of the University nor the names of its contributors -+ * may be used to endorse or promote products derived from this software -+ * without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE -+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS -+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) -+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF -+ * SUCH DAMAGE. -+ * -+ * @(#)queue.h 8.5 (Berkeley) 8/20/94 -+ */ -+ -+#ifndef _DWC_LIST_H_ -+#define _DWC_LIST_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * This file defines linked list operations. It is derived from BSD with -+ * only the MACRO names being prefixed with DWC_. This is because a few of -+ * these names conflict with those on Linux. For documentation on use, see the -+ * inline comments in the source code. The original license for this source -+ * code applies and is preserved in the dwc_list.h source file. -+ */ -+ -+/* -+ * This file defines five types of data structures: singly-linked lists, -+ * lists, simple queues, tail queues, and circular queues. -+ * -+ * -+ * A singly-linked list is headed by a single forward pointer. The elements -+ * are singly linked for minimum space and pointer manipulation overhead at -+ * the expense of O(n) removal for arbitrary elements. New elements can be -+ * added to the list after an existing element or at the head of the list. -+ * Elements being removed from the head of the list should use the explicit -+ * macro for this purpose for optimum efficiency. A singly-linked list may -+ * only be traversed in the forward direction. Singly-linked lists are ideal -+ * for applications with large datasets and few or no removals or for -+ * implementing a LIFO queue. -+ * -+ * A list is headed by a single forward pointer (or an array of forward -+ * pointers for a hash table header). The elements are doubly linked -+ * so that an arbitrary element can be removed without a need to -+ * traverse the list. New elements can be added to the list before -+ * or after an existing element or at the head of the list. A list -+ * may only be traversed in the forward direction. -+ * -+ * A simple queue is headed by a pair of pointers, one the head of the -+ * list and the other to the tail of the list. The elements are singly -+ * linked to save space, so elements can only be removed from the -+ * head of the list. New elements can be added to the list before or after -+ * an existing element, at the head of the list, or at the end of the -+ * list. A simple queue may only be traversed in the forward direction. -+ * -+ * A tail queue is headed by a pair of pointers, one to the head of the -+ * list and the other to the tail of the list. The elements are doubly -+ * linked so that an arbitrary element can be removed without a need to -+ * traverse the list. New elements can be added to the list before or -+ * after an existing element, at the head of the list, or at the end of -+ * the list. A tail queue may be traversed in either direction. -+ * -+ * A circle queue is headed by a pair of pointers, one to the head of the -+ * list and the other to the tail of the list. The elements are doubly -+ * linked so that an arbitrary element can be removed without a need to -+ * traverse the list. New elements can be added to the list before or after -+ * an existing element, at the head of the list, or at the end of the list. -+ * A circle queue may be traversed in either direction, but has a more -+ * complex end of list detection. -+ * -+ * For details on the use of these macros, see the queue(3) manual page. -+ */ -+ -+/* -+ * Double-linked List. -+ */ -+ -+typedef struct dwc_list_link { -+ struct dwc_list_link *next; -+ struct dwc_list_link *prev; -+} dwc_list_link_t; -+ -+#define DWC_LIST_INIT(link) do { \ -+ (link)->next = (link); \ -+ (link)->prev = (link); \ -+} while (0) -+ -+#define DWC_LIST_FIRST(link) ((link)->next) -+#define DWC_LIST_LAST(link) ((link)->prev) -+#define DWC_LIST_END(link) (link) -+#define DWC_LIST_NEXT(link) ((link)->next) -+#define DWC_LIST_PREV(link) ((link)->prev) -+#define DWC_LIST_EMPTY(link) \ -+ (DWC_LIST_FIRST(link) == DWC_LIST_END(link)) -+#define DWC_LIST_ENTRY(link, type, field) \ -+ (type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field)) -+ -+#if 0 -+#define DWC_LIST_INSERT_HEAD(list, link) do { \ -+ (link)->next = (list)->next; \ -+ (link)->prev = (list); \ -+ (list)->next->prev = (link); \ -+ (list)->next = (link); \ -+} while (0) -+ -+#define DWC_LIST_INSERT_TAIL(list, link) do { \ -+ (link)->next = (list); \ -+ (link)->prev = (list)->prev; \ -+ (list)->prev->next = (link); \ -+ (list)->prev = (link); \ -+} while (0) -+#else -+#define DWC_LIST_INSERT_HEAD(list, link) do { \ -+ dwc_list_link_t *__next__ = (list)->next; \ -+ __next__->prev = (link); \ -+ (link)->next = __next__; \ -+ (link)->prev = (list); \ -+ (list)->next = (link); \ -+} while (0) -+ -+#define DWC_LIST_INSERT_TAIL(list, link) do { \ -+ dwc_list_link_t *__prev__ = (list)->prev; \ -+ (list)->prev = (link); \ -+ (link)->next = (list); \ -+ (link)->prev = __prev__; \ -+ __prev__->next = (link); \ -+} while (0) -+#endif -+ -+#if 0 -+static inline void __list_add(struct list_head *new, -+ struct list_head *prev, -+ struct list_head *next) -+{ -+ next->prev = new; -+ new->next = next; -+ new->prev = prev; -+ prev->next = new; -+} -+ -+static inline void list_add(struct list_head *new, struct list_head *head) -+{ -+ __list_add(new, head, head->next); -+} -+ -+static inline void list_add_tail(struct list_head *new, struct list_head *head) -+{ -+ __list_add(new, head->prev, head); -+} -+ -+static inline void __list_del(struct list_head * prev, struct list_head * next) -+{ -+ next->prev = prev; -+ prev->next = next; -+} -+ -+static inline void list_del(struct list_head *entry) -+{ -+ __list_del(entry->prev, entry->next); -+ entry->next = LIST_POISON1; -+ entry->prev = LIST_POISON2; -+} -+#endif -+ -+#define DWC_LIST_REMOVE(link) do { \ -+ (link)->next->prev = (link)->prev; \ -+ (link)->prev->next = (link)->next; \ -+} while (0) -+ -+#define DWC_LIST_REMOVE_INIT(link) do { \ -+ DWC_LIST_REMOVE(link); \ -+ DWC_LIST_INIT(link); \ -+} while (0) -+ -+#define DWC_LIST_MOVE_HEAD(list, link) do { \ -+ DWC_LIST_REMOVE(link); \ -+ DWC_LIST_INSERT_HEAD(list, link); \ -+} while (0) -+ -+#define DWC_LIST_MOVE_TAIL(list, link) do { \ -+ DWC_LIST_REMOVE(link); \ -+ DWC_LIST_INSERT_TAIL(list, link); \ -+} while (0) -+ -+#define DWC_LIST_FOREACH(var, list) \ -+ for((var) = DWC_LIST_FIRST(list); \ -+ (var) != DWC_LIST_END(list); \ -+ (var) = DWC_LIST_NEXT(var)) -+ -+#define DWC_LIST_FOREACH_SAFE(var, var2, list) \ -+ for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var); \ -+ (var) != DWC_LIST_END(list); \ -+ (var) = (var2), (var2) = DWC_LIST_NEXT(var2)) -+ -+#define DWC_LIST_FOREACH_REVERSE(var, list) \ -+ for((var) = DWC_LIST_LAST(list); \ -+ (var) != DWC_LIST_END(list); \ -+ (var) = DWC_LIST_PREV(var)) -+ -+/* -+ * Singly-linked List definitions. -+ */ -+#define DWC_SLIST_HEAD(name, type) \ -+struct name { \ -+ struct type *slh_first; /* first element */ \ -+} -+ -+#define DWC_SLIST_HEAD_INITIALIZER(head) \ -+ { NULL } -+ -+#define DWC_SLIST_ENTRY(type) \ -+struct { \ -+ struct type *sle_next; /* next element */ \ -+} -+ -+/* -+ * Singly-linked List access methods. -+ */ -+#define DWC_SLIST_FIRST(head) ((head)->slh_first) -+#define DWC_SLIST_END(head) NULL -+#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head)) -+#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next) -+ -+#define DWC_SLIST_FOREACH(var, head, field) \ -+ for((var) = SLIST_FIRST(head); \ -+ (var) != SLIST_END(head); \ -+ (var) = SLIST_NEXT(var, field)) -+ -+#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \ -+ for((varp) = &SLIST_FIRST((head)); \ -+ ((var) = *(varp)) != SLIST_END(head); \ -+ (varp) = &SLIST_NEXT((var), field)) -+ -+/* -+ * Singly-linked List functions. -+ */ -+#define DWC_SLIST_INIT(head) { \ -+ SLIST_FIRST(head) = SLIST_END(head); \ -+} -+ -+#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \ -+ (elm)->field.sle_next = (slistelm)->field.sle_next; \ -+ (slistelm)->field.sle_next = (elm); \ -+} while (0) -+ -+#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \ -+ (elm)->field.sle_next = (head)->slh_first; \ -+ (head)->slh_first = (elm); \ -+} while (0) -+ -+#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \ -+ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \ -+} while (0) -+ -+#define DWC_SLIST_REMOVE_HEAD(head, field) do { \ -+ (head)->slh_first = (head)->slh_first->field.sle_next; \ -+} while (0) -+ -+#define DWC_SLIST_REMOVE(head, elm, type, field) do { \ -+ if ((head)->slh_first == (elm)) { \ -+ SLIST_REMOVE_HEAD((head), field); \ -+ } \ -+ else { \ -+ struct type *curelm = (head)->slh_first; \ -+ while( curelm->field.sle_next != (elm) ) \ -+ curelm = curelm->field.sle_next; \ -+ curelm->field.sle_next = \ -+ curelm->field.sle_next->field.sle_next; \ -+ } \ -+} while (0) -+ -+/* -+ * Simple queue definitions. -+ */ -+#define DWC_SIMPLEQ_HEAD(name, type) \ -+struct name { \ -+ struct type *sqh_first; /* first element */ \ -+ struct type **sqh_last; /* addr of last next element */ \ -+} -+ -+#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \ -+ { NULL, &(head).sqh_first } -+ -+#define DWC_SIMPLEQ_ENTRY(type) \ -+struct { \ -+ struct type *sqe_next; /* next element */ \ -+} -+ -+/* -+ * Simple queue access methods. -+ */ -+#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first) -+#define DWC_SIMPLEQ_END(head) NULL -+#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head)) -+#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next) -+ -+#define DWC_SIMPLEQ_FOREACH(var, head, field) \ -+ for((var) = SIMPLEQ_FIRST(head); \ -+ (var) != SIMPLEQ_END(head); \ -+ (var) = SIMPLEQ_NEXT(var, field)) -+ -+/* -+ * Simple queue functions. -+ */ -+#define DWC_SIMPLEQ_INIT(head) do { \ -+ (head)->sqh_first = NULL; \ -+ (head)->sqh_last = &(head)->sqh_first; \ -+} while (0) -+ -+#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \ -+ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \ -+ (head)->sqh_last = &(elm)->field.sqe_next; \ -+ (head)->sqh_first = (elm); \ -+} while (0) -+ -+#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \ -+ (elm)->field.sqe_next = NULL; \ -+ *(head)->sqh_last = (elm); \ -+ (head)->sqh_last = &(elm)->field.sqe_next; \ -+} while (0) -+ -+#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ -+ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\ -+ (head)->sqh_last = &(elm)->field.sqe_next; \ -+ (listelm)->field.sqe_next = (elm); \ -+} while (0) -+ -+#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \ -+ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \ -+ (head)->sqh_last = &(head)->sqh_first; \ -+} while (0) -+ -+/* -+ * Tail queue definitions. -+ */ -+#define DWC_TAILQ_HEAD(name, type) \ -+struct name { \ -+ struct type *tqh_first; /* first element */ \ -+ struct type **tqh_last; /* addr of last next element */ \ -+} -+ -+#define DWC_TAILQ_HEAD_INITIALIZER(head) \ -+ { NULL, &(head).tqh_first } -+ -+#define DWC_TAILQ_ENTRY(type) \ -+struct { \ -+ struct type *tqe_next; /* next element */ \ -+ struct type **tqe_prev; /* address of previous next element */ \ -+} -+ -+/* -+ * tail queue access methods -+ */ -+#define DWC_TAILQ_FIRST(head) ((head)->tqh_first) -+#define DWC_TAILQ_END(head) NULL -+#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) -+#define DWC_TAILQ_LAST(head, headname) \ -+ (*(((struct headname *)((head)->tqh_last))->tqh_last)) -+/* XXX */ -+#define DWC_TAILQ_PREV(elm, headname, field) \ -+ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) -+#define DWC_TAILQ_EMPTY(head) \ -+ (DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head)) -+ -+#define DWC_TAILQ_FOREACH(var, head, field) \ -+ for ((var) = DWC_TAILQ_FIRST(head); \ -+ (var) != DWC_TAILQ_END(head); \ -+ (var) = DWC_TAILQ_NEXT(var, field)) -+ -+#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \ -+ for ((var) = DWC_TAILQ_LAST(head, headname); \ -+ (var) != DWC_TAILQ_END(head); \ -+ (var) = DWC_TAILQ_PREV(var, headname, field)) -+ -+/* -+ * Tail queue functions. -+ */ -+#define DWC_TAILQ_INIT(head) do { \ -+ (head)->tqh_first = NULL; \ -+ (head)->tqh_last = &(head)->tqh_first; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \ -+ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \ -+ (head)->tqh_first->field.tqe_prev = \ -+ &(elm)->field.tqe_next; \ -+ else \ -+ (head)->tqh_last = &(elm)->field.tqe_next; \ -+ (head)->tqh_first = (elm); \ -+ (elm)->field.tqe_prev = &(head)->tqh_first; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \ -+ (elm)->field.tqe_next = NULL; \ -+ (elm)->field.tqe_prev = (head)->tqh_last; \ -+ *(head)->tqh_last = (elm); \ -+ (head)->tqh_last = &(elm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ -+ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\ -+ (elm)->field.tqe_next->field.tqe_prev = \ -+ &(elm)->field.tqe_next; \ -+ else \ -+ (head)->tqh_last = &(elm)->field.tqe_next; \ -+ (listelm)->field.tqe_next = (elm); \ -+ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ -+ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ -+ (elm)->field.tqe_next = (listelm); \ -+ *(listelm)->field.tqe_prev = (elm); \ -+ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_REMOVE(head, elm, field) do { \ -+ if (((elm)->field.tqe_next) != NULL) \ -+ (elm)->field.tqe_next->field.tqe_prev = \ -+ (elm)->field.tqe_prev; \ -+ else \ -+ (head)->tqh_last = (elm)->field.tqe_prev; \ -+ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \ -+} while (0) -+ -+#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \ -+ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \ -+ (elm2)->field.tqe_next->field.tqe_prev = \ -+ &(elm2)->field.tqe_next; \ -+ else \ -+ (head)->tqh_last = &(elm2)->field.tqe_next; \ -+ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \ -+ *(elm2)->field.tqe_prev = (elm2); \ -+} while (0) -+ -+/* -+ * Circular queue definitions. -+ */ -+#define DWC_CIRCLEQ_HEAD(name, type) \ -+struct name { \ -+ struct type *cqh_first; /* first element */ \ -+ struct type *cqh_last; /* last element */ \ -+} -+ -+#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \ -+ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) } -+ -+#define DWC_CIRCLEQ_ENTRY(type) \ -+struct { \ -+ struct type *cqe_next; /* next element */ \ -+ struct type *cqe_prev; /* previous element */ \ -+} -+ -+/* -+ * Circular queue access methods -+ */ -+#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first) -+#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last) -+#define DWC_CIRCLEQ_END(head) ((void *)(head)) -+#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next) -+#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev) -+#define DWC_CIRCLEQ_EMPTY(head) \ -+ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head)) -+ -+#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL)) -+ -+#define DWC_CIRCLEQ_FOREACH(var, head, field) \ -+ for((var) = DWC_CIRCLEQ_FIRST(head); \ -+ (var) != DWC_CIRCLEQ_END(head); \ -+ (var) = DWC_CIRCLEQ_NEXT(var, field)) -+ -+#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \ -+ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \ -+ (var) != DWC_CIRCLEQ_END(head); \ -+ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field)) -+ -+#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \ -+ for((var) = DWC_CIRCLEQ_LAST(head); \ -+ (var) != DWC_CIRCLEQ_END(head); \ -+ (var) = DWC_CIRCLEQ_PREV(var, field)) -+ -+/* -+ * Circular queue functions. -+ */ -+#define DWC_CIRCLEQ_INIT(head) do { \ -+ (head)->cqh_first = DWC_CIRCLEQ_END(head); \ -+ (head)->cqh_last = DWC_CIRCLEQ_END(head); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \ -+ (elm)->field.cqe_next = NULL; \ -+ (elm)->field.cqe_prev = NULL; \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \ -+ (elm)->field.cqe_next = (listelm)->field.cqe_next; \ -+ (elm)->field.cqe_prev = (listelm); \ -+ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_last = (elm); \ -+ else \ -+ (listelm)->field.cqe_next->field.cqe_prev = (elm); \ -+ (listelm)->field.cqe_next = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \ -+ (elm)->field.cqe_next = (listelm); \ -+ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ -+ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_first = (elm); \ -+ else \ -+ (listelm)->field.cqe_prev->field.cqe_next = (elm); \ -+ (listelm)->field.cqe_prev = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \ -+ (elm)->field.cqe_next = (head)->cqh_first; \ -+ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \ -+ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_last = (elm); \ -+ else \ -+ (head)->cqh_first->field.cqe_prev = (elm); \ -+ (head)->cqh_first = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \ -+ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \ -+ (elm)->field.cqe_prev = (head)->cqh_last; \ -+ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_first = (elm); \ -+ else \ -+ (head)->cqh_last->field.cqe_next = (elm); \ -+ (head)->cqh_last = (elm); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \ -+ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_last = (elm)->field.cqe_prev; \ -+ else \ -+ (elm)->field.cqe_next->field.cqe_prev = \ -+ (elm)->field.cqe_prev; \ -+ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \ -+ (head)->cqh_first = (elm)->field.cqe_next; \ -+ else \ -+ (elm)->field.cqe_prev->field.cqe_next = \ -+ (elm)->field.cqe_next; \ -+} while (0) -+ -+#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \ -+ DWC_CIRCLEQ_REMOVE(head, elm, field); \ -+ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \ -+} while (0) -+ -+#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \ -+ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \ -+ DWC_CIRCLEQ_END(head)) \ -+ (head).cqh_last = (elm2); \ -+ else \ -+ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \ -+ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \ -+ DWC_CIRCLEQ_END(head)) \ -+ (head).cqh_first = (elm2); \ -+ else \ -+ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \ -+} while (0) -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_LIST_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_mem.c -@@ -0,0 +1,245 @@ -+/* Memory Debugging */ -+#ifdef DWC_DEBUG_MEMORY -+ -+#include "dwc_os.h" -+#include "dwc_list.h" -+ -+struct allocation { -+ void *addr; -+ void *ctx; -+ char *func; -+ int line; -+ uint32_t size; -+ int dma; -+ DWC_CIRCLEQ_ENTRY(allocation) entry; -+}; -+ -+DWC_CIRCLEQ_HEAD(allocation_queue, allocation); -+ -+struct allocation_manager { -+ void *mem_ctx; -+ struct allocation_queue allocations; -+ -+ /* statistics */ -+ int num; -+ int num_freed; -+ int num_active; -+ uint32_t total; -+ uint32_t cur; -+ uint32_t max; -+}; -+ -+static struct allocation_manager *manager = NULL; -+ -+static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr, -+ int dma) -+{ -+ struct allocation *a; -+ -+ DWC_ASSERT(manager != NULL, "manager not allocated"); -+ -+ a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a)); -+ if (!a) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1); -+ if (!a->func) { -+ __DWC_FREE(manager->mem_ctx, a); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1); -+ a->addr = addr; -+ a->ctx = ctx; -+ a->line = line; -+ a->size = size; -+ a->dma = dma; -+ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry); -+ -+ /* Update stats */ -+ manager->num++; -+ manager->num_active++; -+ manager->total += size; -+ manager->cur += size; -+ -+ if (manager->max < manager->cur) { -+ manager->max = manager->cur; -+ } -+ -+ return 0; -+} -+ -+static struct allocation *find_allocation(void *ctx, void *addr) -+{ -+ struct allocation *a; -+ -+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { -+ if (a->ctx == ctx && a->addr == addr) { -+ return a; -+ } -+ } -+ -+ return NULL; -+} -+ -+static void free_allocation(void *ctx, void *addr, char const *func, int line) -+{ -+ struct allocation *a = find_allocation(ctx, addr); -+ -+ if (!a) { -+ DWC_ASSERT(0, -+ "Free of address %p that was never allocated or already freed %s:%d", -+ addr, func, line); -+ return; -+ } -+ -+ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry); -+ -+ manager->num_active--; -+ manager->num_freed++; -+ manager->cur -= a->size; -+ __DWC_FREE(manager->mem_ctx, a->func); -+ __DWC_FREE(manager->mem_ctx, a); -+} -+ -+int dwc_memory_debug_start(void *mem_ctx) -+{ -+ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n"); -+ -+ if (manager) { -+ return -DWC_E_BUSY; -+ } -+ -+ manager = __DWC_ALLOC(mem_ctx, sizeof(*manager)); -+ if (!manager) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_CIRCLEQ_INIT(&manager->allocations); -+ manager->mem_ctx = mem_ctx; -+ manager->num = 0; -+ manager->num_freed = 0; -+ manager->num_active = 0; -+ manager->total = 0; -+ manager->cur = 0; -+ manager->max = 0; -+ -+ return 0; -+} -+ -+void dwc_memory_debug_stop(void) -+{ -+ struct allocation *a; -+ -+ dwc_memory_debug_report(); -+ -+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { -+ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line); -+ free_allocation(a->ctx, a->addr, NULL, -1); -+ } -+ -+ __DWC_FREE(manager->mem_ctx, manager); -+} -+ -+void dwc_memory_debug_report(void) -+{ -+ struct allocation *a; -+ -+ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n"); -+ DWC_PRINTF("Num Allocations = %d\n", manager->num); -+ DWC_PRINTF("Freed = %d\n", manager->num_freed); -+ DWC_PRINTF("Active = %d\n", manager->num_active); -+ DWC_PRINTF("Current Memory Used = %d\n", manager->cur); -+ DWC_PRINTF("Total Memory Used = %d\n", manager->total); -+ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max); -+ DWC_PRINTF("Unfreed allocations:\n"); -+ -+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) { -+ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n", -+ a->addr, a->size, a->func, a->line, a->dma); -+ } -+} -+ -+/* The replacement functions */ -+void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line) -+{ -+ void *addr = __DWC_ALLOC(mem_ctx, size); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { -+ __DWC_FREE(mem_ctx, addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, -+ int line) -+{ -+ void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(mem_ctx, size, func, line, addr, 0)) { -+ __DWC_FREE(mem_ctx, addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line) -+{ -+ free_allocation(mem_ctx, addr, func, line); -+ __DWC_FREE(mem_ctx, addr); -+} -+ -+void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, -+ char const *func, int line) -+{ -+ void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { -+ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, -+ dwc_dma_t *dma_addr, char const *func, int line) -+{ -+ void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr); -+ -+ if (!addr) { -+ return NULL; -+ } -+ -+ if (add_allocation(dma_ctx, size, func, line, addr, 1)) { -+ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr); -+ return NULL; -+ } -+ -+ return addr; -+} -+ -+void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, -+ dwc_dma_t dma_addr, char const *func, int line) -+{ -+ free_allocation(dma_ctx, virt_addr, func, line); -+ __DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr); -+} -+ -+#endif /* DWC_DEBUG_MEMORY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c -@@ -0,0 +1,636 @@ -+/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows. -+ * -+ * PuTTY is copyright 1997-2007 Simon Tatham. -+ * -+ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian -+ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry, -+ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus -+ * Kuhn, and CORE SDI S.A. -+ * -+ * Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation files -+ * (the "Software"), to deal in the Software without restriction, -+ * including without limitation the rights to use, copy, modify, merge, -+ * publish, distribute, sublicense, and/or sell copies of the Software, -+ * and to permit persons to whom the Software is furnished to do so, -+ * subject to the following conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE -+ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF -+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION -+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -+ * -+ */ -+#ifdef DWC_CRYPTOLIB -+ -+#ifndef CONFIG_MACH_IPMATE -+ -+#include "dwc_modpow.h" -+ -+#define BIGNUM_INT_MASK 0xFFFFFFFFUL -+#define BIGNUM_TOP_BIT 0x80000000UL -+#define BIGNUM_INT_BITS 32 -+ -+ -+static void *snmalloc(void *mem_ctx, size_t n, size_t size) -+{ -+ void *p; -+ size *= n; -+ if (size == 0) size = 1; -+ p = dwc_alloc(mem_ctx, size); -+ return p; -+} -+ -+#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type))) -+#define sfree dwc_free -+ -+/* -+ * Usage notes: -+ * * Do not call the DIVMOD_WORD macro with expressions such as array -+ * subscripts, as some implementations object to this (see below). -+ * * Note that none of the division methods below will cope if the -+ * quotient won't fit into BIGNUM_INT_BITS. Callers should be careful -+ * to avoid this case. -+ * If this condition occurs, in the case of the x86 DIV instruction, -+ * an overflow exception will occur, which (according to a correspondent) -+ * will manifest on Windows as something like -+ * 0xC0000095: Integer overflow -+ * The C variant won't give the right answer, either. -+ */ -+ -+#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2) -+ -+#if defined __GNUC__ && defined __i386__ -+#define DIVMOD_WORD(q, r, hi, lo, w) \ -+ __asm__("div %2" : \ -+ "=d" (r), "=a" (q) : \ -+ "r" (w), "d" (hi), "a" (lo)) -+#else -+#define DIVMOD_WORD(q, r, hi, lo, w) do { \ -+ BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \ -+ q = n / w; \ -+ r = n % w; \ -+} while (0) -+#endif -+ -+// q = n / w; -+// r = n % w; -+ -+#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8) -+ -+#define BIGNUM_INTERNAL -+ -+static Bignum newbn(void *mem_ctx, int length) -+{ -+ Bignum b = snewn(mem_ctx, length + 1, BignumInt); -+ //if (!b) -+ //abort(); /* FIXME */ -+ DWC_MEMSET(b, 0, (length + 1) * sizeof(*b)); -+ b[0] = length; -+ return b; -+} -+ -+void freebn(void *mem_ctx, Bignum b) -+{ -+ /* -+ * Burn the evidence, just in case. -+ */ -+ DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1)); -+ sfree(mem_ctx, b); -+} -+ -+/* -+ * Compute c = a * b. -+ * Input is in the first len words of a and b. -+ * Result is returned in the first 2*len words of c. -+ */ -+static void internal_mul(BignumInt *a, BignumInt *b, -+ BignumInt *c, int len) -+{ -+ int i, j; -+ BignumDblInt t; -+ -+ for (j = 0; j < 2 * len; j++) -+ c[j] = 0; -+ -+ for (i = len - 1; i >= 0; i--) { -+ t = 0; -+ for (j = len - 1; j >= 0; j--) { -+ t += MUL_WORD(a[i], (BignumDblInt) b[j]); -+ t += (BignumDblInt) c[i + j + 1]; -+ c[i + j + 1] = (BignumInt) t; -+ t = t >> BIGNUM_INT_BITS; -+ } -+ c[i] = (BignumInt) t; -+ } -+} -+ -+static void internal_add_shifted(BignumInt *number, -+ unsigned n, int shift) -+{ -+ int word = 1 + (shift / BIGNUM_INT_BITS); -+ int bshift = shift % BIGNUM_INT_BITS; -+ BignumDblInt addend; -+ -+ addend = (BignumDblInt)n << bshift; -+ -+ while (addend) { -+ addend += number[word]; -+ number[word] = (BignumInt) addend & BIGNUM_INT_MASK; -+ addend >>= BIGNUM_INT_BITS; -+ word++; -+ } -+} -+ -+/* -+ * Compute a = a % m. -+ * Input in first alen words of a and first mlen words of m. -+ * Output in first alen words of a -+ * (of which first alen-mlen words will be zero). -+ * The MSW of m MUST have its high bit set. -+ * Quotient is accumulated in the `quotient' array, which is a Bignum -+ * rather than the internal bigendian format. Quotient parts are shifted -+ * left by `qshift' before adding into quot. -+ */ -+static void internal_mod(BignumInt *a, int alen, -+ BignumInt *m, int mlen, -+ BignumInt *quot, int qshift) -+{ -+ BignumInt m0, m1; -+ unsigned int h; -+ int i, k; -+ -+ m0 = m[0]; -+ if (mlen > 1) -+ m1 = m[1]; -+ else -+ m1 = 0; -+ -+ for (i = 0; i <= alen - mlen; i++) { -+ BignumDblInt t; -+ unsigned int q, r, c, ai1; -+ -+ if (i == 0) { -+ h = 0; -+ } else { -+ h = a[i - 1]; -+ a[i - 1] = 0; -+ } -+ -+ if (i == alen - 1) -+ ai1 = 0; -+ else -+ ai1 = a[i + 1]; -+ -+ /* Find q = h:a[i] / m0 */ -+ if (h >= m0) { -+ /* -+ * Special case. -+ * -+ * To illustrate it, suppose a BignumInt is 8 bits, and -+ * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then -+ * our initial division will be 0xA123 / 0xA1, which -+ * will give a quotient of 0x100 and a divide overflow. -+ * However, the invariants in this division algorithm -+ * are not violated, since the full number A1:23:... is -+ * _less_ than the quotient prefix A1:B2:... and so the -+ * following correction loop would have sorted it out. -+ * -+ * In this situation we set q to be the largest -+ * quotient we _can_ stomach (0xFF, of course). -+ */ -+ q = BIGNUM_INT_MASK; -+ } else { -+ /* Macro doesn't want an array subscript expression passed -+ * into it (see definition), so use a temporary. */ -+ BignumInt tmplo = a[i]; -+ DIVMOD_WORD(q, r, h, tmplo, m0); -+ -+ /* Refine our estimate of q by looking at -+ h:a[i]:a[i+1] / m0:m1 */ -+ t = MUL_WORD(m1, q); -+ if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) { -+ q--; -+ t -= m1; -+ r = (r + m0) & BIGNUM_INT_MASK; /* overflow? */ -+ if (r >= (BignumDblInt) m0 && -+ t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--; -+ } -+ } -+ -+ /* Subtract q * m from a[i...] */ -+ c = 0; -+ for (k = mlen - 1; k >= 0; k--) { -+ t = MUL_WORD(q, m[k]); -+ t += c; -+ c = (unsigned)(t >> BIGNUM_INT_BITS); -+ if ((BignumInt) t > a[i + k]) -+ c++; -+ a[i + k] -= (BignumInt) t; -+ } -+ -+ /* Add back m in case of borrow */ -+ if (c != h) { -+ t = 0; -+ for (k = mlen - 1; k >= 0; k--) { -+ t += m[k]; -+ t += a[i + k]; -+ a[i + k] = (BignumInt) t; -+ t = t >> BIGNUM_INT_BITS; -+ } -+ q--; -+ } -+ if (quot) -+ internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i)); -+ } -+} -+ -+/* -+ * Compute p % mod. -+ * The most significant word of mod MUST be non-zero. -+ * We assume that the result array is the same size as the mod array. -+ * We optionally write out a quotient if `quotient' is non-NULL. -+ * We can avoid writing out the result if `result' is NULL. -+ */ -+void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient) -+{ -+ BignumInt *n, *m; -+ int mshift; -+ int plen, mlen, i, j; -+ -+ /* Allocate m of size mlen, copy mod to m */ -+ /* We use big endian internally */ -+ mlen = mod[0]; -+ m = snewn(mem_ctx, mlen, BignumInt); -+ //if (!m) -+ //abort(); /* FIXME */ -+ for (j = 0; j < mlen; j++) -+ m[j] = mod[mod[0] - j]; -+ -+ /* Shift m left to make msb bit set */ -+ for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++) -+ if ((m[0] << mshift) & BIGNUM_TOP_BIT) -+ break; -+ if (mshift) { -+ for (i = 0; i < mlen - 1; i++) -+ m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift)); -+ m[mlen - 1] = m[mlen - 1] << mshift; -+ } -+ -+ plen = p[0]; -+ /* Ensure plen > mlen */ -+ if (plen <= mlen) -+ plen = mlen + 1; -+ -+ /* Allocate n of size plen, copy p to n */ -+ n = snewn(mem_ctx, plen, BignumInt); -+ //if (!n) -+ //abort(); /* FIXME */ -+ for (j = 0; j < plen; j++) -+ n[j] = 0; -+ for (j = 1; j <= (int)p[0]; j++) -+ n[plen - j] = p[j]; -+ -+ /* Main computation */ -+ internal_mod(n, plen, m, mlen, quotient, mshift); -+ -+ /* Fixup result in case the modulus was shifted */ -+ if (mshift) { -+ for (i = plen - mlen - 1; i < plen - 1; i++) -+ n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift)); -+ n[plen - 1] = n[plen - 1] << mshift; -+ internal_mod(n, plen, m, mlen, quotient, 0); -+ for (i = plen - 1; i >= plen - mlen; i--) -+ n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift)); -+ } -+ -+ /* Copy result to buffer */ -+ if (result) { -+ for (i = 1; i <= (int)result[0]; i++) { -+ int j = plen - i; -+ result[i] = j >= 0 ? n[j] : 0; -+ } -+ } -+ -+ /* Free temporary arrays */ -+ for (i = 0; i < mlen; i++) -+ m[i] = 0; -+ sfree(mem_ctx, m); -+ for (i = 0; i < plen; i++) -+ n[i] = 0; -+ sfree(mem_ctx, n); -+} -+ -+/* -+ * Simple remainder. -+ */ -+Bignum bigmod(void *mem_ctx, Bignum a, Bignum b) -+{ -+ Bignum r = newbn(mem_ctx, b[0]); -+ bigdivmod(mem_ctx, a, b, r, NULL); -+ return r; -+} -+ -+/* -+ * Compute (base ^ exp) % mod. -+ */ -+Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod) -+{ -+ BignumInt *a, *b, *n, *m; -+ int mshift; -+ int mlen, i, j; -+ Bignum base, result; -+ -+ /* -+ * The most significant word of mod needs to be non-zero. It -+ * should already be, but let's make sure. -+ */ -+ //assert(mod[mod[0]] != 0); -+ -+ /* -+ * Make sure the base is smaller than the modulus, by reducing -+ * it modulo the modulus if not. -+ */ -+ base = bigmod(mem_ctx, base_in, mod); -+ -+ /* Allocate m of size mlen, copy mod to m */ -+ /* We use big endian internally */ -+ mlen = mod[0]; -+ m = snewn(mem_ctx, mlen, BignumInt); -+ //if (!m) -+ //abort(); /* FIXME */ -+ for (j = 0; j < mlen; j++) -+ m[j] = mod[mod[0] - j]; -+ -+ /* Shift m left to make msb bit set */ -+ for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++) -+ if ((m[0] << mshift) & BIGNUM_TOP_BIT) -+ break; -+ if (mshift) { -+ for (i = 0; i < mlen - 1; i++) -+ m[i] = -+ (m[i] << mshift) | (m[i + 1] >> -+ (BIGNUM_INT_BITS - mshift)); -+ m[mlen - 1] = m[mlen - 1] << mshift; -+ } -+ -+ /* Allocate n of size mlen, copy base to n */ -+ n = snewn(mem_ctx, mlen, BignumInt); -+ //if (!n) -+ //abort(); /* FIXME */ -+ i = mlen - base[0]; -+ for (j = 0; j < i; j++) -+ n[j] = 0; -+ for (j = 0; j < base[0]; j++) -+ n[i + j] = base[base[0] - j]; -+ -+ /* Allocate a and b of size 2*mlen. Set a = 1 */ -+ a = snewn(mem_ctx, 2 * mlen, BignumInt); -+ //if (!a) -+ //abort(); /* FIXME */ -+ b = snewn(mem_ctx, 2 * mlen, BignumInt); -+ //if (!b) -+ //abort(); /* FIXME */ -+ for (i = 0; i < 2 * mlen; i++) -+ a[i] = 0; -+ a[2 * mlen - 1] = 1; -+ -+ /* Skip leading zero bits of exp. */ -+ i = 0; -+ j = BIGNUM_INT_BITS - 1; -+ while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) { -+ j--; -+ if (j < 0) { -+ i++; -+ j = BIGNUM_INT_BITS - 1; -+ } -+ } -+ -+ /* Main computation */ -+ while (i < exp[0]) { -+ while (j >= 0) { -+ internal_mul(a + mlen, a + mlen, b, mlen); -+ internal_mod(b, mlen * 2, m, mlen, NULL, 0); -+ if ((exp[exp[0] - i] & (1 << j)) != 0) { -+ internal_mul(b + mlen, n, a, mlen); -+ internal_mod(a, mlen * 2, m, mlen, NULL, 0); -+ } else { -+ BignumInt *t; -+ t = a; -+ a = b; -+ b = t; -+ } -+ j--; -+ } -+ i++; -+ j = BIGNUM_INT_BITS - 1; -+ } -+ -+ /* Fixup result in case the modulus was shifted */ -+ if (mshift) { -+ for (i = mlen - 1; i < 2 * mlen - 1; i++) -+ a[i] = -+ (a[i] << mshift) | (a[i + 1] >> -+ (BIGNUM_INT_BITS - mshift)); -+ a[2 * mlen - 1] = a[2 * mlen - 1] << mshift; -+ internal_mod(a, mlen * 2, m, mlen, NULL, 0); -+ for (i = 2 * mlen - 1; i >= mlen; i--) -+ a[i] = -+ (a[i] >> mshift) | (a[i - 1] << -+ (BIGNUM_INT_BITS - mshift)); -+ } -+ -+ /* Copy result to buffer */ -+ result = newbn(mem_ctx, mod[0]); -+ for (i = 0; i < mlen; i++) -+ result[result[0] - i] = a[i + mlen]; -+ while (result[0] > 1 && result[result[0]] == 0) -+ result[0]--; -+ -+ /* Free temporary arrays */ -+ for (i = 0; i < 2 * mlen; i++) -+ a[i] = 0; -+ sfree(mem_ctx, a); -+ for (i = 0; i < 2 * mlen; i++) -+ b[i] = 0; -+ sfree(mem_ctx, b); -+ for (i = 0; i < mlen; i++) -+ m[i] = 0; -+ sfree(mem_ctx, m); -+ for (i = 0; i < mlen; i++) -+ n[i] = 0; -+ sfree(mem_ctx, n); -+ -+ freebn(mem_ctx, base); -+ -+ return result; -+} -+ -+ -+#ifdef UNITTEST -+ -+static __u32 dh_p[] = { -+ 96, -+ 0xFFFFFFFF, -+ 0xFFFFFFFF, -+ 0xA93AD2CA, -+ 0x4B82D120, -+ 0xE0FD108E, -+ 0x43DB5BFC, -+ 0x74E5AB31, -+ 0x08E24FA0, -+ 0xBAD946E2, -+ 0x770988C0, -+ 0x7A615D6C, -+ 0xBBE11757, -+ 0x177B200C, -+ 0x521F2B18, -+ 0x3EC86A64, -+ 0xD8760273, -+ 0xD98A0864, -+ 0xF12FFA06, -+ 0x1AD2EE6B, -+ 0xCEE3D226, -+ 0x4A25619D, -+ 0x1E8C94E0, -+ 0xDB0933D7, -+ 0xABF5AE8C, -+ 0xA6E1E4C7, -+ 0xB3970F85, -+ 0x5D060C7D, -+ 0x8AEA7157, -+ 0x58DBEF0A, -+ 0xECFB8504, -+ 0xDF1CBA64, -+ 0xA85521AB, -+ 0x04507A33, -+ 0xAD33170D, -+ 0x8AAAC42D, -+ 0x15728E5A, -+ 0x98FA0510, -+ 0x15D22618, -+ 0xEA956AE5, -+ 0x3995497C, -+ 0x95581718, -+ 0xDE2BCBF6, -+ 0x6F4C52C9, -+ 0xB5C55DF0, -+ 0xEC07A28F, -+ 0x9B2783A2, -+ 0x180E8603, -+ 0xE39E772C, -+ 0x2E36CE3B, -+ 0x32905E46, -+ 0xCA18217C, -+ 0xF1746C08, -+ 0x4ABC9804, -+ 0x670C354E, -+ 0x7096966D, -+ 0x9ED52907, -+ 0x208552BB, -+ 0x1C62F356, -+ 0xDCA3AD96, -+ 0x83655D23, -+ 0xFD24CF5F, -+ 0x69163FA8, -+ 0x1C55D39A, -+ 0x98DA4836, -+ 0xA163BF05, -+ 0xC2007CB8, -+ 0xECE45B3D, -+ 0x49286651, -+ 0x7C4B1FE6, -+ 0xAE9F2411, -+ 0x5A899FA5, -+ 0xEE386BFB, -+ 0xF406B7ED, -+ 0x0BFF5CB6, -+ 0xA637ED6B, -+ 0xF44C42E9, -+ 0x625E7EC6, -+ 0xE485B576, -+ 0x6D51C245, -+ 0x4FE1356D, -+ 0xF25F1437, -+ 0x302B0A6D, -+ 0xCD3A431B, -+ 0xEF9519B3, -+ 0x8E3404DD, -+ 0x514A0879, -+ 0x3B139B22, -+ 0x020BBEA6, -+ 0x8A67CC74, -+ 0x29024E08, -+ 0x80DC1CD1, -+ 0xC4C6628B, -+ 0x2168C234, -+ 0xC90FDAA2, -+ 0xFFFFFFFF, -+ 0xFFFFFFFF, -+}; -+ -+static __u32 dh_a[] = { -+ 8, -+ 0xdf367516, -+ 0x86459caa, -+ 0xe2d459a4, -+ 0xd910dae0, -+ 0x8a8b5e37, -+ 0x67ab31c6, -+ 0xf0b55ea9, -+ 0x440051d6, -+}; -+ -+static __u32 dh_b[] = { -+ 8, -+ 0xded92656, -+ 0xe07a048a, -+ 0x6fa452cd, -+ 0x2df89d30, -+ 0xc75f1b0f, -+ 0x8ce3578f, -+ 0x7980a324, -+ 0x5daec786, -+}; -+ -+static __u32 dh_g[] = { -+ 1, -+ 2, -+}; -+ -+int main(void) -+{ -+ int i; -+ __u32 *k; -+ k = dwc_modpow(NULL, dh_g, dh_a, dh_p); -+ -+ printf("\n\n"); -+ for (i=0; i<k[0]; i++) { -+ __u32 word32 = k[k[0] - i]; -+ __u16 l = word32 & 0xffff; -+ __u16 m = (word32 & 0xffff0000) >> 16; -+ printf("%04x %04x ", m, l); -+ if (!((i + 1)%13)) printf("\n"); -+ } -+ printf("\n\n"); -+ -+ if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) { -+ printf("PASS\n\n"); -+ } -+ else { -+ printf("FAIL\n\n"); -+ } -+ -+} -+ -+#endif /* UNITTEST */ -+ -+#endif /* CONFIG_MACH_IPMATE */ -+ -+#endif /*DWC_CRYPTOLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h -@@ -0,0 +1,34 @@ -+/* -+ * dwc_modpow.h -+ * See dwc_modpow.c for license and changes -+ */ -+#ifndef _DWC_MODPOW_H -+#define _DWC_MODPOW_H -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include "dwc_os.h" -+ -+/** @file -+ * -+ * This file defines the module exponentiation function which is only used -+ * internally by the DWC UWB modules for calculation of PKs during numeric -+ * association. The routine is taken from the PUTTY, an open source terminal -+ * emulator. The PUTTY License is preserved in the dwc_modpow.c file. -+ * -+ */ -+ -+typedef uint32_t BignumInt; -+typedef uint64_t BignumDblInt; -+typedef BignumInt *Bignum; -+ -+/* Compute modular exponentiaion */ -+extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _LINUX_BIGNUM_H */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c -@@ -0,0 +1,319 @@ -+#ifdef DWC_NOTIFYLIB -+ -+#include "dwc_notifier.h" -+#include "dwc_list.h" -+ -+typedef struct dwc_observer { -+ void *observer; -+ dwc_notifier_callback_t callback; -+ void *data; -+ char *notification; -+ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry; -+} observer_t; -+ -+DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer); -+ -+typedef struct dwc_notifier { -+ void *mem_ctx; -+ void *object; -+ struct observer_queue observers; -+ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry; -+} notifier_t; -+ -+DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier); -+ -+typedef struct manager { -+ void *mem_ctx; -+ void *wkq_ctx; -+ dwc_workq_t *wq; -+// dwc_mutex_t *mutex; -+ struct notifier_queue notifiers; -+} manager_t; -+ -+static manager_t *manager = NULL; -+ -+static int create_manager(void *mem_ctx, void *wkq_ctx) -+{ -+ manager = dwc_alloc(mem_ctx, sizeof(manager_t)); -+ if (!manager) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_CIRCLEQ_INIT(&manager->notifiers); -+ -+ manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ"); -+ if (!manager->wq) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ return 0; -+} -+ -+static void free_manager(void) -+{ -+ dwc_workq_free(manager->wq); -+ -+ /* All notifiers must have unregistered themselves before this module -+ * can be removed. Hitting this assertion indicates a programmer -+ * error. */ -+ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers), -+ "Notification manager being freed before all notifiers have been removed"); -+ dwc_free(manager->mem_ctx, manager); -+} -+ -+#ifdef DEBUG -+static void dump_manager(void) -+{ -+ notifier_t *n; -+ observer_t *o; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ DWC_DEBUG("List of all notifiers and observers:\n"); -+ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { -+ DWC_DEBUG("Notifier %p has observers:\n", n->object); -+ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) { -+ DWC_DEBUG(" %p watching %s\n", o->observer, o->notification); -+ } -+ } -+} -+#else -+#define dump_manager(...) -+#endif -+ -+static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification, -+ dwc_notifier_callback_t callback, void *data) -+{ -+ observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t)); -+ -+ if (!new_observer) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry); -+ new_observer->observer = observer; -+ new_observer->notification = notification; -+ new_observer->callback = callback; -+ new_observer->data = data; -+ return new_observer; -+} -+ -+static void free_observer(void *mem_ctx, observer_t *observer) -+{ -+ dwc_free(mem_ctx, observer); -+} -+ -+static notifier_t *alloc_notifier(void *mem_ctx, void *object) -+{ -+ notifier_t *notifier; -+ -+ if (!object) { -+ return NULL; -+ } -+ -+ notifier = dwc_alloc(mem_ctx, sizeof(notifier_t)); -+ if (!notifier) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INIT(¬ifier->observers); -+ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry); -+ -+ notifier->mem_ctx = mem_ctx; -+ notifier->object = object; -+ return notifier; -+} -+ -+static void free_notifier(notifier_t *notifier) -+{ -+ observer_t *observer; -+ -+ DWC_CIRCLEQ_FOREACH(observer, ¬ifier->observers, list_entry) { -+ free_observer(notifier->mem_ctx, observer); -+ } -+ -+ dwc_free(notifier->mem_ctx, notifier); -+} -+ -+static notifier_t *find_notifier(void *object) -+{ -+ notifier_t *notifier; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ if (!object) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) { -+ if (notifier->object == object) { -+ return notifier; -+ } -+ } -+ -+ return NULL; -+} -+ -+int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx) -+{ -+ return create_manager(mem_ctx, wkq_ctx); -+} -+ -+void dwc_free_notification_manager(void) -+{ -+ free_manager(); -+} -+ -+dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object) -+{ -+ notifier_t *notifier; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ notifier = find_notifier(object); -+ if (notifier) { -+ DWC_ERROR("Notifier %p is already registered\n", object); -+ return NULL; -+ } -+ -+ notifier = alloc_notifier(mem_ctx, object); -+ if (!notifier) { -+ return NULL; -+ } -+ -+ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry); -+ -+ DWC_INFO("Notifier %p registered", object); -+ dump_manager(); -+ -+ return notifier; -+} -+ -+void dwc_unregister_notifier(dwc_notifier_t *notifier) -+{ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ if (!DWC_CIRCLEQ_EMPTY(¬ifier->observers)) { -+ observer_t *o; -+ -+ DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object); -+ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { -+ DWC_DEBUGC(" %p watching %s\n", o->observer, o->notification); -+ } -+ -+ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(¬ifier->observers), -+ "Notifier %p has active observers when removing", notifier); -+ } -+ -+ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry); -+ free_notifier(notifier); -+ -+ DWC_INFO("Notifier unregistered"); -+ dump_manager(); -+} -+ -+/* Add an observer to observe the notifier for a particular state, event, or notification. */ -+int dwc_add_observer(void *observer, void *object, char *notification, -+ dwc_notifier_callback_t callback, void *data) -+{ -+ notifier_t *notifier = find_notifier(object); -+ observer_t *new_observer; -+ -+ if (!notifier) { -+ DWC_ERROR("Notifier %p is not found when adding observer\n", object); -+ return -DWC_E_INVALID; -+ } -+ -+ new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data); -+ if (!new_observer) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_CIRCLEQ_INSERT_TAIL(¬ifier->observers, new_observer, list_entry); -+ -+ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p", -+ observer, object, notification, callback, data); -+ -+ dump_manager(); -+ return 0; -+} -+ -+int dwc_remove_observer(void *observer) -+{ -+ notifier_t *n; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) { -+ observer_t *o; -+ observer_t *o2; -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) { -+ if (o->observer == observer) { -+ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry); -+ DWC_INFO("Removing observer %p from notifier %p watching notification %s:", -+ o->observer, n->object, o->notification); -+ free_observer(n->mem_ctx, o); -+ } -+ } -+ } -+ -+ dump_manager(); -+ return 0; -+} -+ -+typedef struct callback_data { -+ void *mem_ctx; -+ dwc_notifier_callback_t cb; -+ void *observer; -+ void *data; -+ void *object; -+ char *notification; -+ void *notification_data; -+} cb_data_t; -+ -+static void cb_task(void *data) -+{ -+ cb_data_t *cb = (cb_data_t *)data; -+ -+ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data); -+ dwc_free(cb->mem_ctx, cb); -+} -+ -+void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data) -+{ -+ observer_t *o; -+ -+ DWC_ASSERT(manager, "Notification manager not found"); -+ -+ DWC_CIRCLEQ_FOREACH(o, ¬ifier->observers, list_entry) { -+ int len = DWC_STRLEN(notification); -+ -+ if (DWC_STRLEN(o->notification) != len) { -+ continue; -+ } -+ -+ if (DWC_STRNCMP(o->notification, notification, len) == 0) { -+ cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t)); -+ -+ if (!cb_data) { -+ DWC_ERROR("Failed to allocate callback data\n"); -+ return; -+ } -+ -+ cb_data->mem_ctx = notifier->mem_ctx; -+ cb_data->cb = o->callback; -+ cb_data->observer = o->observer; -+ cb_data->data = o->data; -+ cb_data->object = notifier->object; -+ cb_data->notification = notification; -+ cb_data->notification_data = notification_data; -+ DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification); -+ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data, -+ "Notify callback from %p for Notification %s, to observer %p", -+ cb_data->object, notification, cb_data->observer); -+ } -+ } -+} -+ -+#endif /* DWC_NOTIFYLIB */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h -@@ -0,0 +1,122 @@ -+ -+#ifndef __DWC_NOTIFIER_H__ -+#define __DWC_NOTIFIER_H__ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+#include "dwc_os.h" -+ -+/** @file -+ * -+ * A simple implementation of the Observer pattern. Any "module" can -+ * register as an observer or notifier. The notion of "module" is abstract and -+ * can mean anything used to identify either an observer or notifier. Usually -+ * it will be a pointer to a data structure which contains some state, ie an -+ * object. -+ * -+ * Before any notifiers can be added, the global notification manager must be -+ * brought up with dwc_alloc_notification_manager(). -+ * dwc_free_notification_manager() will bring it down and free all resources. -+ * These would typically be called upon module load and unload. The -+ * notification manager is a single global instance that handles all registered -+ * observable modules and observers so this should be done only once. -+ * -+ * A module can be observable by using Notifications to publicize some general -+ * information about it's state or operation. It does not care who listens, or -+ * even if anyone listens, or what they do with the information. The observable -+ * modules do not need to know any information about it's observers or their -+ * interface, or their state or data. -+ * -+ * Any module can register to emit Notifications. It should publish a list of -+ * notifications that it can emit and their behavior, such as when they will get -+ * triggered, and what information will be provided to the observer. Then it -+ * should register itself as an observable module. See dwc_register_notifier(). -+ * -+ * Any module can observe any observable, registered module, provided it has a -+ * handle to the other module and knows what notifications to observe. See -+ * dwc_add_observer(). -+ * -+ * A function of type dwc_notifier_callback_t is called whenever a notification -+ * is triggered with one or more observers observing it. This function is -+ * called in it's own process so it may sleep or block if needed. It is -+ * guaranteed to be called sometime after the notification has occurred and will -+ * be called once per each time the notification is triggered. It will NOT be -+ * called in the same process context used to trigger the notification. -+ * -+ * @section Limitiations -+ * -+ * Keep in mind that Notifications that can be triggered in rapid sucession may -+ * schedule too many processes too handle. Be aware of this limitation when -+ * designing to use notifications, and only add notifications for appropriate -+ * observable information. -+ * -+ * Also Notification callbacks are not synchronous. If you need to synchronize -+ * the behavior between module/observer you must use other means. And perhaps -+ * that will mean Notifications are not the proper solution. -+ */ -+ -+struct dwc_notifier; -+typedef struct dwc_notifier dwc_notifier_t; -+ -+/** The callback function must be of this type. -+ * -+ * @param object This is the object that is being observed. -+ * @param notification This is the notification that was triggered. -+ * @param observer This is the observer -+ * @param notification_data This is notification-specific data that the notifier -+ * has included in this notification. The value of this should be published in -+ * the documentation of the observable module with the notifications. -+ * @param user_data This is any custom data that the observer provided when -+ * adding itself as an observer to the notification. */ -+typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer, -+ void *notification_data, void *user_data); -+ -+/** Brings up the notification manager. */ -+extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx); -+/** Brings down the notification manager. */ -+extern void dwc_free_notification_manager(void); -+ -+/** This function registers an observable module. A dwc_notifier_t object is -+ * returned to the observable module. This is an opaque object that is used by -+ * the observable module to trigger notifications. This object should only be -+ * accessible to functions that are authorized to trigger notifications for this -+ * module. Observers do not need this object. */ -+extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object); -+ -+/** This function unregisters an observable module. All observers have to be -+ * removed prior to unregistration. */ -+extern void dwc_unregister_notifier(dwc_notifier_t *notifier); -+ -+/** Add a module as an observer to the observable module. The observable module -+ * needs to have previously registered with the notification manager. -+ * -+ * @param observer The observer module -+ * @param object The module to observe -+ * @param notification The notification to observe -+ * @param callback The callback function to call -+ * @param user_data Any additional user data to pass into the callback function */ -+extern int dwc_add_observer(void *observer, void *object, char *notification, -+ dwc_notifier_callback_t callback, void *user_data); -+ -+/** Removes the specified observer from all notifications that it is currently -+ * observing. */ -+extern int dwc_remove_observer(void *observer); -+ -+/** This function triggers a Notification. It should be called by the -+ * observable module, or any module or library which the observable module -+ * allows to trigger notification on it's behalf. Such as the dwc_cc_t. -+ * -+ * dwc_notify is a non-blocking function. Callbacks are scheduled called in -+ * their own process context for each trigger. Callbacks can be blocking. -+ * dwc_notify can be called from interrupt context if needed. -+ * -+ */ -+void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data); -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* __DWC_NOTIFIER_H__ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/dwc_os.h -@@ -0,0 +1,1276 @@ -+/* ========================================================================= -+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $ -+ * $Revision: #14 $ -+ * $Date: 2010/11/04 $ -+ * $Change: 1621695 $ -+ * -+ * Synopsys Portability Library Software and documentation -+ * (hereinafter, "Software") is an Unsupported proprietary work of -+ * Synopsys, Inc. unless otherwise expressly agreed to in writing -+ * between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product -+ * under any End User Software License Agreement or Agreement for -+ * Licensed Product with Synopsys or any supplement thereto. You are -+ * permitted to use and redistribute this Software in source and binary -+ * forms, with or without modification, provided that redistributions -+ * of source code must retain this notice. You may not view, use, -+ * disclose, copy or distribute this file or any information contained -+ * herein except pursuant to this license grant from Synopsys. If you -+ * do not agree with this notice, including the disclaimer below, then -+ * you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" -+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL -+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY -+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE -+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================= */ -+#ifndef _DWC_OS_H_ -+#define _DWC_OS_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/** @file -+ * -+ * DWC portability library, low level os-wrapper functions -+ * -+ */ -+ -+/* These basic types need to be defined by some OS header file or custom header -+ * file for your specific target architecture. -+ * -+ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t -+ * -+ * Any custom or alternate header file must be added and enabled here. -+ */ -+ -+#ifdef DWC_LINUX -+# include <linux/types.h> -+# ifdef CONFIG_DEBUG_MUTEXES -+# include <linux/mutex.h> -+# endif -+# include <linux/spinlock.h> -+# include <linux/errno.h> -+# include <stdarg.h> -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+# include <os_dep.h> -+#endif -+ -+ -+/** @name Primitive Types and Values */ -+ -+/** We define a boolean type for consistency. Can be either YES or NO */ -+typedef uint8_t dwc_bool_t; -+#define YES 1 -+#define NO 0 -+ -+#ifdef DWC_LINUX -+ -+/** @name Error Codes */ -+#define DWC_E_INVALID EINVAL -+#define DWC_E_NO_MEMORY ENOMEM -+#define DWC_E_NO_DEVICE ENODEV -+#define DWC_E_NOT_SUPPORTED EOPNOTSUPP -+#define DWC_E_TIMEOUT ETIMEDOUT -+#define DWC_E_BUSY EBUSY -+#define DWC_E_AGAIN EAGAIN -+#define DWC_E_RESTART ERESTART -+#define DWC_E_ABORT ECONNABORTED -+#define DWC_E_SHUTDOWN ESHUTDOWN -+#define DWC_E_NO_DATA ENODATA -+#define DWC_E_DISCONNECT ECONNRESET -+#define DWC_E_UNKNOWN EINVAL -+#define DWC_E_NO_STREAM_RES ENOSR -+#define DWC_E_COMMUNICATION ECOMM -+#define DWC_E_OVERFLOW EOVERFLOW -+#define DWC_E_PROTOCOL EPROTO -+#define DWC_E_IN_PROGRESS EINPROGRESS -+#define DWC_E_PIPE EPIPE -+#define DWC_E_IO EIO -+#define DWC_E_NO_SPACE ENOSPC -+ -+#else -+ -+/** @name Error Codes */ -+#define DWC_E_INVALID 1001 -+#define DWC_E_NO_MEMORY 1002 -+#define DWC_E_NO_DEVICE 1003 -+#define DWC_E_NOT_SUPPORTED 1004 -+#define DWC_E_TIMEOUT 1005 -+#define DWC_E_BUSY 1006 -+#define DWC_E_AGAIN 1007 -+#define DWC_E_RESTART 1008 -+#define DWC_E_ABORT 1009 -+#define DWC_E_SHUTDOWN 1010 -+#define DWC_E_NO_DATA 1011 -+#define DWC_E_DISCONNECT 2000 -+#define DWC_E_UNKNOWN 3000 -+#define DWC_E_NO_STREAM_RES 4001 -+#define DWC_E_COMMUNICATION 4002 -+#define DWC_E_OVERFLOW 4003 -+#define DWC_E_PROTOCOL 4004 -+#define DWC_E_IN_PROGRESS 4005 -+#define DWC_E_PIPE 4006 -+#define DWC_E_IO 4007 -+#define DWC_E_NO_SPACE 4008 -+ -+#endif -+ -+ -+/** @name Tracing/Logging Functions -+ * -+ * These function provide the capability to add tracing, debugging, and error -+ * messages, as well exceptions as assertions. The WUDEV uses these -+ * extensively. These could be logged to the main console, the serial port, an -+ * internal buffer, etc. These functions could also be no-op if they are too -+ * expensive on your system. By default undefining the DEBUG macro already -+ * no-ops some of these functions. */ -+ -+/** Returns non-zero if in interrupt context. */ -+extern dwc_bool_t DWC_IN_IRQ(void); -+#define dwc_in_irq DWC_IN_IRQ -+ -+/** Returns "IRQ" if DWC_IN_IRQ is true. */ -+static inline char *dwc_irq(void) { -+ return DWC_IN_IRQ() ? "IRQ" : ""; -+} -+ -+/** Returns non-zero if in bottom-half context. */ -+extern dwc_bool_t DWC_IN_BH(void); -+#define dwc_in_bh DWC_IN_BH -+ -+/** Returns "BH" if DWC_IN_BH is true. */ -+static inline char *dwc_bh(void) { -+ return DWC_IN_BH() ? "BH" : ""; -+} -+ -+/** -+ * A vprintf() clone. Just call vprintf if you've got it. -+ */ -+extern void DWC_VPRINTF(char *format, va_list args); -+#define dwc_vprintf DWC_VPRINTF -+ -+/** -+ * A vsnprintf() clone. Just call vprintf if you've got it. -+ */ -+extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args); -+#define dwc_vsnprintf DWC_VSNPRINTF -+ -+/** -+ * printf() clone. Just call printf if you've go it. -+ */ -+extern void DWC_PRINTF(char *format, ...) -+/* This provides compiler level static checking of the parameters if you're -+ * using GCC. */ -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+#define dwc_printf DWC_PRINTF -+ -+/** -+ * sprintf() clone. Just call sprintf if you've got it. -+ */ -+extern int DWC_SPRINTF(char *string, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 2, 3))); -+#else -+ ; -+#endif -+#define dwc_sprintf DWC_SPRINTF -+ -+/** -+ * snprintf() clone. Just call snprintf if you've got it. -+ */ -+extern int DWC_SNPRINTF(char *string, int size, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 3, 4))); -+#else -+ ; -+#endif -+#define dwc_snprintf DWC_SNPRINTF -+ -+/** -+ * Prints a WARNING message. On systems that don't differentiate between -+ * warnings and regular log messages, just print it. Indicates that something -+ * may be wrong with the driver. Works like printf(). -+ * -+ * Use the DWC_WARN macro to call this function. -+ */ -+extern void __DWC_WARN(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+ -+/** -+ * Prints an error message. On systems that don't differentiate between errors -+ * and regular log messages, just print it. Indicates that something went wrong -+ * with the driver. Works like printf(). -+ * -+ * Use the DWC_ERROR macro to call this function. -+ */ -+extern void __DWC_ERROR(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+ -+/** -+ * Prints an exception error message and takes some user-defined action such as -+ * print out a backtrace or trigger a breakpoint. Indicates that something went -+ * abnormally wrong with the driver such as programmer error, or other -+ * exceptional condition. It should not be ignored so even on systems without -+ * printing capability, some action should be taken to notify the developer of -+ * it. Works like printf(). -+ */ -+extern void DWC_EXCEPTION(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+#define dwc_exception DWC_EXCEPTION -+ -+#ifndef DWC_OTG_DEBUG_LEV -+#define DWC_OTG_DEBUG_LEV 0 -+#endif -+ -+#ifdef DEBUG -+/** -+ * Prints out a debug message. Used for logging/trace messages. -+ * -+ * Use the DWC_DEBUG macro to call this function -+ */ -+extern void __DWC_DEBUG(char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 1, 2))); -+#else -+ ; -+#endif -+#else -+#define __DWC_DEBUG printk -+#endif -+ -+/** -+ * Prints out a Debug message. -+ */ -+#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \ -+ __func__, dwc_irq(), ## _args) -+#define dwc_debug DWC_DEBUG -+/** -+ * Prints out a Debug message if enabled at compile time. -+ */ -+#if DWC_OTG_DEBUG_LEV > 0 -+#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args ) -+#else -+#define DWC_DEBUGC(_format, _args...) -+#endif -+#define dwc_debugc DWC_DEBUGC -+/** -+ * Prints out an informative message. -+ */ -+#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \ -+ dwc_irq(), ## _args) -+#define dwc_info DWC_INFO -+/** -+ * Prints out an informative message if enabled at compile time. -+ */ -+#if DWC_OTG_DEBUG_LEV > 1 -+#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args ) -+#else -+#define DWC_INFOC(_format, _args...) -+#endif -+#define dwc_infoc DWC_INFOC -+/** -+ * Prints out a warning message. -+ */ -+#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \ -+ dwc_irq(), __func__, __LINE__, ## _args) -+#define dwc_warn DWC_WARN -+/** -+ * Prints out an error message. -+ */ -+#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \ -+ dwc_irq(), __func__, __LINE__, ## _args) -+#define dwc_error DWC_ERROR -+ -+#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \ -+ dwc_irq(), __func__, __LINE__, ## _args) -+#define dwc_proto_error DWC_PROTO_ERROR -+ -+#ifdef DEBUG -+/** Prints out a exception error message if the _expr expression fails. Disabled -+ * if DEBUG is not enabled. */ -+#define DWC_ASSERT(_expr, _format, _args...) do { \ -+ if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \ -+ __FILE__, __LINE__, ## _args); } \ -+ } while (0) -+#else -+#define DWC_ASSERT(_x...) -+#endif -+#define dwc_assert DWC_ASSERT -+ -+ -+/** @name Byte Ordering -+ * The following functions are for conversions between processor's byte ordering -+ * and specific ordering you want. -+ */ -+ -+/** Converts 32 bit data in CPU byte ordering to little endian. */ -+extern uint32_t DWC_CPU_TO_LE32(uint32_t *p); -+#define dwc_cpu_to_le32 DWC_CPU_TO_LE32 -+ -+/** Converts 32 bit data in CPU byte orderint to big endian. */ -+extern uint32_t DWC_CPU_TO_BE32(uint32_t *p); -+#define dwc_cpu_to_be32 DWC_CPU_TO_BE32 -+ -+/** Converts 32 bit little endian data to CPU byte ordering. */ -+extern uint32_t DWC_LE32_TO_CPU(uint32_t *p); -+#define dwc_le32_to_cpu DWC_LE32_TO_CPU -+ -+/** Converts 32 bit big endian data to CPU byte ordering. */ -+extern uint32_t DWC_BE32_TO_CPU(uint32_t *p); -+#define dwc_be32_to_cpu DWC_BE32_TO_CPU -+ -+/** Converts 16 bit data in CPU byte ordering to little endian. */ -+extern uint16_t DWC_CPU_TO_LE16(uint16_t *p); -+#define dwc_cpu_to_le16 DWC_CPU_TO_LE16 -+ -+/** Converts 16 bit data in CPU byte orderint to big endian. */ -+extern uint16_t DWC_CPU_TO_BE16(uint16_t *p); -+#define dwc_cpu_to_be16 DWC_CPU_TO_BE16 -+ -+/** Converts 16 bit little endian data to CPU byte ordering. */ -+extern uint16_t DWC_LE16_TO_CPU(uint16_t *p); -+#define dwc_le16_to_cpu DWC_LE16_TO_CPU -+ -+/** Converts 16 bit bi endian data to CPU byte ordering. */ -+extern uint16_t DWC_BE16_TO_CPU(uint16_t *p); -+#define dwc_be16_to_cpu DWC_BE16_TO_CPU -+ -+ -+/** @name Register Read/Write -+ * -+ * The following six functions should be implemented to read/write registers of -+ * 32-bit and 64-bit sizes. All modules use this to read/write register values. -+ * The reg value is a pointer to the register calculated from the void *base -+ * variable passed into the driver when it is started. */ -+ -+#ifdef DWC_LINUX -+/* Linux doesn't need any extra parameters for register read/write, so we -+ * just throw away the IO context parameter. -+ */ -+/** Reads the content of a 32-bit register. */ -+extern uint32_t DWC_READ_REG32(uint32_t volatile *reg); -+#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_) -+ -+/** Reads the content of a 64-bit register. */ -+extern uint64_t DWC_READ_REG64(uint64_t volatile *reg); -+#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_) -+ -+/** Writes to a 32-bit register. */ -+extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value); -+#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_) -+ -+/** Writes to a 64-bit register. */ -+extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value); -+#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_) -+ -+/** -+ * Modify bit values in a register. Using the -+ * algorithm: (reg_contents & ~clear_mask) | set_mask. -+ */ -+extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); -+#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_) -+extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); -+#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_) -+ -+#endif /* DWC_LINUX */ -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+typedef struct dwc_ioctx { -+ struct device *dev; -+ bus_space_tag_t iot; -+ bus_space_handle_t ioh; -+} dwc_ioctx_t; -+ -+/** BSD needs two extra parameters for register read/write, so we pass -+ * them in using the IO context parameter. -+ */ -+/** Reads the content of a 32-bit register. */ -+extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg); -+#define dwc_read_reg32 DWC_READ_REG32 -+ -+/** Reads the content of a 64-bit register. */ -+extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg); -+#define dwc_read_reg64 DWC_READ_REG64 -+ -+/** Writes to a 32-bit register. */ -+extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value); -+#define dwc_write_reg32 DWC_WRITE_REG32 -+ -+/** Writes to a 64-bit register. */ -+extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value); -+#define dwc_write_reg64 DWC_WRITE_REG64 -+ -+/** -+ * Modify bit values in a register. Using the -+ * algorithm: (reg_contents & ~clear_mask) | set_mask. -+ */ -+extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask); -+#define dwc_modify_reg32 DWC_MODIFY_REG32 -+extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask); -+#define dwc_modify_reg64 DWC_MODIFY_REG64 -+ -+#endif /* DWC_FREEBSD || DWC_NETBSD */ -+ -+/** @cond */ -+ -+/** @name Some convenience MACROS used internally. Define DWC_DEBUG_REGS to log the -+ * register writes. */ -+ -+#ifdef DWC_LINUX -+ -+# ifdef DWC_DEBUG_REGS -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ -+ return DWC_READ_REG32(&container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ -+ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ -+ &(((uint32_t*)container->regs->_reg)[num]), data); \ -+ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(_container_type *container) { \ -+ return DWC_READ_REG32(&container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ -+ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ -+ DWC_WRITE_REG32(&container->regs->_reg, data); \ -+} -+ -+# else /* DWC_DEBUG_REGS */ -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \ -+ return DWC_READ_REG32(&container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \ -+ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(_container_type *container) { \ -+ return DWC_READ_REG32(&container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \ -+ DWC_WRITE_REG32(&container->regs->_reg, data); \ -+} -+ -+# endif /* DWC_DEBUG_REGS */ -+ -+#endif /* DWC_LINUX */ -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+ -+# ifdef DWC_DEBUG_REGS -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ -+ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \ -+ &(((uint32_t*)container->regs->_reg)[num]), data); \ -+ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ -+ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \ -+ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ -+} -+ -+# else /* DWC_DEBUG_REGS */ -+ -+#define dwc_define_read_write_reg_n(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \ -+} \ -+static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \ -+ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \ -+} -+ -+#define dwc_define_read_write_reg(_reg,_container_type) \ -+static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \ -+ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \ -+} \ -+static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \ -+ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \ -+} -+ -+# endif /* DWC_DEBUG_REGS */ -+ -+#endif /* DWC_FREEBSD || DWC_NETBSD */ -+ -+/** @endcond */ -+ -+ -+#ifdef DWC_CRYPTOLIB -+/** @name Crypto Functions -+ * -+ * These are the low-level cryptographic functions used by the driver. */ -+ -+/** Perform AES CBC */ -+extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out); -+#define dwc_aes_cbc DWC_AES_CBC -+ -+/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */ -+extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length); -+#define dwc_random_bytes DWC_RANDOM_BYTES -+ -+/** Perform the SHA-256 hash function */ -+extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out); -+#define dwc_sha256 DWC_SHA256 -+ -+/** Calculated the HMAC-SHA256 */ -+extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out); -+#define dwc_hmac_sha256 DWC_HMAC_SHA256 -+ -+#endif /* DWC_CRYPTOLIB */ -+ -+ -+/** @name Memory Allocation -+ * -+ * These function provide access to memory allocation. There are only 2 DMA -+ * functions and 3 Regular memory functions that need to be implemented. None -+ * of the memory debugging routines need to be implemented. The allocation -+ * routines all ZERO the contents of the memory. -+ * -+ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering. -+ * This checks for memory leaks, keeping track of alloc/free pairs. It also -+ * keeps track of how much memory the driver is using at any given time. */ -+ -+#define DWC_PAGE_SIZE 4096 -+#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff) -+#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0) -+ -+#define DWC_INVALID_DMA_ADDR 0x0 -+ -+#ifdef DWC_LINUX -+/** Type for a DMA address */ -+typedef dma_addr_t dwc_dma_t; -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+typedef bus_addr_t dwc_dma_t; -+#endif -+ -+#ifdef DWC_FREEBSD -+typedef struct dwc_dmactx { -+ struct device *dev; -+ bus_dma_tag_t dma_tag; -+ bus_dmamap_t dma_map; -+ bus_addr_t dma_paddr; -+ void *dma_vaddr; -+} dwc_dmactx_t; -+#endif -+ -+#ifdef DWC_NETBSD -+typedef struct dwc_dmactx { -+ struct device *dev; -+ bus_dma_tag_t dma_tag; -+ bus_dmamap_t dma_map; -+ bus_dma_segment_t segs[1]; -+ int nsegs; -+ bus_addr_t dma_paddr; -+ void *dma_vaddr; -+} dwc_dmactx_t; -+#endif -+ -+/* @todo these functions will be added in the future */ -+#if 0 -+/** -+ * Creates a DMA pool from which you can allocate DMA buffers. Buffers -+ * allocated from this pool will be guaranteed to meet the size, alignment, and -+ * boundary requirements specified. -+ * -+ * @param[in] size Specifies the size of the buffers that will be allocated from -+ * this pool. -+ * @param[in] align Specifies the byte alignment requirements of the buffers -+ * allocated from this pool. Must be a power of 2. -+ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from -+ * this pool must not cross. -+ * -+ * @returns A pointer to an internal opaque structure which is not to be -+ * accessed outside of these library functions. Use this handle to specify -+ * which pools to allocate/free DMA buffers from and also to destroy the pool, -+ * when you are done with it. -+ */ -+extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary); -+ -+/** -+ * Destroy a DMA pool. All buffers allocated from that pool must be freed first. -+ */ -+extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool); -+ -+/** -+ * Allocate a buffer from the specified DMA pool and zeros its contents. -+ */ -+extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr); -+ -+/** -+ * Free a previously allocated buffer from the DMA pool. -+ */ -+extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr); -+#endif -+ -+/** Allocates a DMA capable buffer and zeroes its contents. */ -+extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); -+ -+/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */ -+extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr); -+ -+/** Frees a previously allocated buffer. */ -+extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr); -+ -+/** Allocates a block of memory and zeroes its contents. */ -+extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size); -+ -+/** Allocates a block of memory and zeroes its contents, in an atomic manner -+ * which can be used inside interrupt context. The size should be sufficiently -+ * small, a few KB at most, such that failures are not likely to occur. Can just call -+ * __DWC_ALLOC if it is atomic. */ -+extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size); -+ -+/** Frees a previously allocated buffer. */ -+extern void __DWC_FREE(void *mem_ctx, void *addr); -+ -+#ifndef DWC_DEBUG_MEMORY -+ -+#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_) -+#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_) -+#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_) -+ -+# ifdef DWC_LINUX -+#define DWC_DMA_ALLOC(_dev, _size_, _dma_) __DWC_DMA_ALLOC(_dev, _size_, _dma_) -+#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) __DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) -+#define DWC_DMA_FREE(_dev, _size_,_virt_, _dma_) __DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) -+# endif -+ -+# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+#define DWC_DMA_ALLOC __DWC_DMA_ALLOC -+#define DWC_DMA_FREE __DWC_DMA_FREE -+# endif -+extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line); -+ -+#else /* DWC_DEBUG_MEMORY */ -+ -+extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line); -+extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line); -+extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line); -+extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, -+ char const *func, int line); -+extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr, -+ char const *func, int line); -+extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr, -+ dwc_dma_t dma_addr, char const *func, int line); -+ -+extern int dwc_memory_debug_start(void *mem_ctx); -+extern void dwc_memory_debug_stop(void); -+extern void dwc_memory_debug_report(void); -+ -+#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__) -+#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \ -+ __func__, __LINE__) -+#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__) -+ -+# ifdef DWC_LINUX -+#define DWC_DMA_ALLOC(_dev, _size_, _dma_) \ -+ dwc_dma_alloc_debug(_dev, _size_, _dma_, __func__, __LINE__) -+#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) \ -+ dwc_dma_alloc_atomic_debug(_dev, _size_, _dma_, __func__, __LINE__) -+#define DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) \ -+ dwc_dma_free_debug(_dev, _size_, _virt_, _dma_, __func__, __LINE__) -+# endif -+ -+# if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \ -+ _dma_, __func__, __LINE__) -+#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \ -+ _virt_, _dma_, __func__, __LINE__) -+# endif -+ -+#endif /* DWC_DEBUG_MEMORY */ -+ -+#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_) -+#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_) -+#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_) -+ -+#ifdef DWC_LINUX -+/* Linux doesn't need any extra parameters for DMA buffer allocation, so we -+ * just throw away the DMA context parameter. -+ */ -+#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_) -+#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_) -+#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_) -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+/** BSD needs several extra parameters for DMA buffer allocation, so we pass -+ * them in using the DMA context parameter. -+ */ -+#define dwc_dma_alloc DWC_DMA_ALLOC -+#define dwc_dma_free DWC_DMA_FREE -+#endif -+ -+ -+/** @name Memory and String Processing */ -+ -+/** memset() clone */ -+extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size); -+#define dwc_memset DWC_MEMSET -+ -+/** memcpy() clone */ -+extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size); -+#define dwc_memcpy DWC_MEMCPY -+ -+/** memmove() clone */ -+extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size); -+#define dwc_memmove DWC_MEMMOVE -+ -+/** memcmp() clone */ -+extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size); -+#define dwc_memcmp DWC_MEMCMP -+ -+/** strcmp() clone */ -+extern int DWC_STRCMP(void *s1, void *s2); -+#define dwc_strcmp DWC_STRCMP -+ -+/** strncmp() clone */ -+extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size); -+#define dwc_strncmp DWC_STRNCMP -+ -+/** strlen() clone, for NULL terminated ASCII strings */ -+extern int DWC_STRLEN(char const *str); -+#define dwc_strlen DWC_STRLEN -+ -+/** strcpy() clone, for NULL terminated ASCII strings */ -+extern char *DWC_STRCPY(char *to, const char *from); -+#define dwc_strcpy DWC_STRCPY -+ -+/** strdup() clone. If you wish to use memory allocation debugging, this -+ * implementation of strdup should use the DWC_* memory routines instead of -+ * calling a predefined strdup. Otherwise the memory allocated by this routine -+ * will not be seen by the debugging routines. */ -+extern char *DWC_STRDUP(char const *str); -+#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_) -+ -+/** NOT an atoi() clone. Read the description carefully. Returns an integer -+ * converted from the string str in base 10 unless the string begins with a "0x" -+ * in which case it is base 16. String must be a NULL terminated sequence of -+ * ASCII characters and may optionally begin with whitespace, a + or -, and a -+ * "0x" prefix if base 16. The remaining characters must be valid digits for -+ * the number and end with a NULL character. If any invalid characters are -+ * encountered or it returns with a negative error code and the results of the -+ * conversion are undefined. On sucess it returns 0. Overflow conditions are -+ * undefined. An example implementation using atoi() can be referenced from the -+ * Linux implementation. */ -+extern int DWC_ATOI(const char *str, int32_t *value); -+#define dwc_atoi DWC_ATOI -+ -+/** Same as above but for unsigned. */ -+extern int DWC_ATOUI(const char *str, uint32_t *value); -+#define dwc_atoui DWC_ATOUI -+ -+#ifdef DWC_UTFLIB -+/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */ -+extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len); -+#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE -+#endif -+ -+ -+/** @name Wait queues -+ * -+ * Wait queues provide a means of synchronizing between threads or processes. A -+ * process can block on a waitq if some condition is not true, waiting for it to -+ * become true. When the waitq is triggered all waiting process will get -+ * unblocked and the condition will be check again. Waitqs should be triggered -+ * every time a condition can potentially change.*/ -+struct dwc_waitq; -+ -+/** Type for a waitq */ -+typedef struct dwc_waitq dwc_waitq_t; -+ -+/** The type of waitq condition callback function. This is called every time -+ * condition is evaluated. */ -+typedef int (*dwc_waitq_condition_t)(void *data); -+ -+/** Allocate a waitq */ -+extern dwc_waitq_t *DWC_WAITQ_ALLOC(void); -+#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC() -+ -+/** Free a waitq */ -+extern void DWC_WAITQ_FREE(dwc_waitq_t *wq); -+#define dwc_waitq_free DWC_WAITQ_FREE -+ -+/** Check the condition and if it is false, block on the waitq. When unblocked, check the -+ * condition again. The function returns when the condition becomes true. The return value -+ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */ -+extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data); -+#define dwc_waitq_wait DWC_WAITQ_WAIT -+ -+/** Check the condition and if it is false, block on the waitq. When unblocked, -+ * check the condition again. The function returns when the condition become -+ * true or the timeout has passed. The return value is 0 on condition true or -+ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on -+ * error. */ -+extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, -+ void *data, int32_t msecs); -+#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT -+ -+/** Trigger a waitq, unblocking all processes. This should be called whenever a condition -+ * has potentially changed. */ -+extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq); -+#define dwc_waitq_trigger DWC_WAITQ_TRIGGER -+ -+/** Unblock all processes waiting on the waitq with an ABORTED result. */ -+extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq); -+#define dwc_waitq_abort DWC_WAITQ_ABORT -+ -+ -+/** @name Threads -+ * -+ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP -+ * whenever it is woken up, and then return. The DWC_THREAD_STOP function -+ * returns the value from the thread. -+ */ -+ -+struct dwc_thread; -+ -+/** Type for a thread */ -+typedef struct dwc_thread dwc_thread_t; -+ -+/** The thread function */ -+typedef int (*dwc_thread_function_t)(void *data); -+ -+/** Create a thread and start it running the thread_function. Returns a handle -+ * to the thread */ -+extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data); -+#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_) -+ -+/** Stops a thread. Return the value returned by the thread. Or will return -+ * DWC_ABORT if the thread never started. */ -+extern int DWC_THREAD_STOP(dwc_thread_t *thread); -+#define dwc_thread_stop DWC_THREAD_STOP -+ -+/** Signifies to the thread that it must stop. */ -+#ifdef DWC_LINUX -+/* Linux doesn't need any parameters for kthread_should_stop() */ -+extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void); -+#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP() -+ -+/* No thread_exit function in Linux */ -+#define dwc_thread_exit(_thrd_) -+#endif -+ -+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD) -+/** BSD needs the thread pointer for kthread_suspend_check() */ -+extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread); -+#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP -+ -+/** The thread must call this to exit. */ -+extern void DWC_THREAD_EXIT(dwc_thread_t *thread); -+#define dwc_thread_exit DWC_THREAD_EXIT -+#endif -+ -+ -+/** @name Work queues -+ * -+ * Workqs are used to queue a callback function to be called at some later time, -+ * in another thread. */ -+struct dwc_workq; -+ -+/** Type for a workq */ -+typedef struct dwc_workq dwc_workq_t; -+ -+/** The type of the callback function to be called. */ -+typedef void (*dwc_work_callback_t)(void *data); -+ -+/** Allocate a workq */ -+extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name); -+#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_) -+ -+/** Free a workq. All work must be completed before being freed. */ -+extern void DWC_WORKQ_FREE(dwc_workq_t *workq); -+#define dwc_workq_free DWC_WORKQ_FREE -+ -+/** Schedule a callback on the workq, passing in data. The function will be -+ * scheduled at some later time. */ -+extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb, -+ void *data, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 4, 5))); -+#else -+ ; -+#endif -+#define dwc_workq_schedule DWC_WORKQ_SCHEDULE -+ -+/** Schedule a callback on the workq, that will be called until at least -+ * given number miliseconds have passed. */ -+extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb, -+ void *data, uint32_t time, char *format, ...) -+#ifdef __GNUC__ -+ __attribute__ ((format(printf, 5, 6))); -+#else -+ ; -+#endif -+#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED -+ -+/** The number of processes in the workq */ -+extern int DWC_WORKQ_PENDING(dwc_workq_t *workq); -+#define dwc_workq_pending DWC_WORKQ_PENDING -+ -+/** Blocks until all the work in the workq is complete or timed out. Returns < -+ * 0 on timeout. */ -+extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout); -+#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE -+ -+ -+/** @name Tasklets -+ * -+ */ -+struct dwc_tasklet; -+ -+/** Type for a tasklet */ -+typedef struct dwc_tasklet dwc_tasklet_t; -+ -+/** The type of the callback function to be called */ -+typedef void (*dwc_tasklet_callback_t)(void *data); -+ -+/** Allocates a tasklet */ -+extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data); -+#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_) -+ -+/** Frees a tasklet */ -+extern void DWC_TASK_FREE(dwc_tasklet_t *task); -+#define dwc_task_free DWC_TASK_FREE -+ -+/** Schedules a tasklet to run */ -+extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task); -+#define dwc_task_schedule DWC_TASK_SCHEDULE -+ -+extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task); -+#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE -+ -+/** @name Timer -+ * -+ * Callbacks must be small and atomic. -+ */ -+struct dwc_timer; -+ -+/** Type for a timer */ -+typedef struct dwc_timer dwc_timer_t; -+ -+/** The type of the callback function to be called */ -+typedef void (*dwc_timer_callback_t)(void *data); -+ -+/** Allocates a timer */ -+extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data); -+#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_) -+ -+/** Frees a timer */ -+extern void DWC_TIMER_FREE(dwc_timer_t *timer); -+#define dwc_timer_free DWC_TIMER_FREE -+ -+/** Schedules the timer to run at time ms from now. And will repeat at every -+ * repeat_interval msec therafter -+ * -+ * Modifies a timer that is still awaiting execution to a new expiration time. -+ * The mod_time is added to the old time. */ -+extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time); -+#define dwc_timer_schedule DWC_TIMER_SCHEDULE -+ -+/** Disables the timer from execution. */ -+extern void DWC_TIMER_CANCEL(dwc_timer_t *timer); -+#define dwc_timer_cancel DWC_TIMER_CANCEL -+ -+ -+/** @name Spinlocks -+ * -+ * These locks are used when the work between the lock/unlock is atomic and -+ * short. Interrupts are also disabled during the lock/unlock and thus they are -+ * suitable to lock between interrupt/non-interrupt context. They also lock -+ * between processes if you have multiple CPUs or Preemption. If you don't have -+ * multiple CPUS or Preemption, then the you can simply implement the -+ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because -+ * the work between the lock/unlock is atomic, the process context will never -+ * change, and so you never have to lock between processes. */ -+ -+struct dwc_spinlock; -+ -+/** Type for a spinlock */ -+typedef struct dwc_spinlock dwc_spinlock_t; -+ -+/** Type for the 'flags' argument to spinlock funtions */ -+typedef unsigned long dwc_irqflags_t; -+ -+/** Returns an initialized lock variable. This function should allocate and -+ * initialize the OS-specific data structure used for locking. This data -+ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should -+ * be freed by the DWC_FREE_LOCK when it is no longer used. -+ * -+ * For Linux Spinlock Debugging make it macro because the debugging routines use -+ * the symbol name to determine recursive locking. Using a wrapper function -+ * makes it falsely think recursive locking occurs. */ -+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK) -+#define DWC_SPINLOCK_ALLOC_LINUX_DEBUG(lock) ({ \ -+ lock = DWC_ALLOC(sizeof(spinlock_t)); \ -+ if (lock) { \ -+ spin_lock_init((spinlock_t *)lock); \ -+ } \ -+}) -+#else -+extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void); -+#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC() -+#endif -+ -+/** Frees an initialized lock variable. */ -+extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock); -+#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_) -+ -+/** Disables interrupts and blocks until it acquires the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ * @param flags Unsigned long for irq flags storage. -+ */ -+extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags); -+#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE -+ -+/** Re-enables the interrupt and releases the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ * @param flags Unsigned long for irq flags storage. Must be the same as was -+ * passed into DWC_LOCK. -+ */ -+extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags); -+#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE -+ -+/** Blocks until it acquires the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ */ -+extern void DWC_SPINLOCK(dwc_spinlock_t *lock); -+#define dwc_spinlock DWC_SPINLOCK -+ -+/** Releases the lock. -+ * -+ * @param lock Pointer to the spinlock. -+ */ -+extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock); -+#define dwc_spinunlock DWC_SPINUNLOCK -+ -+ -+/** @name Mutexes -+ * -+ * Unlike spinlocks Mutexes lock only between processes and the work between the -+ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context. -+ */ -+ -+struct dwc_mutex; -+ -+/** Type for a mutex */ -+typedef struct dwc_mutex dwc_mutex_t; -+ -+/* For Linux Mutex Debugging make it inline because the debugging routines use -+ * the symbol to determine recursive locking. This makes it falsely think -+ * recursive locking occurs. */ -+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) -+#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \ -+ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \ -+ mutex_init((struct mutex *)__mutexp); \ -+}) -+#endif -+ -+/** Allocate a mutex */ -+extern dwc_mutex_t *DWC_MUTEX_ALLOC(void); -+#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC() -+ -+/* For memory leak debugging when using Linux Mutex Debugging */ -+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES) -+#define DWC_MUTEX_FREE(__mutexp) do { \ -+ mutex_destroy((struct mutex *)__mutexp); \ -+ DWC_FREE(__mutexp); \ -+} while(0) -+#else -+/** Free a mutex */ -+extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex); -+#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_) -+#endif -+ -+/** Lock a mutex */ -+extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex); -+#define dwc_mutex_lock DWC_MUTEX_LOCK -+ -+/** Non-blocking lock returns 1 on successful lock. */ -+extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex); -+#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK -+ -+/** Unlock a mutex */ -+extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex); -+#define dwc_mutex_unlock DWC_MUTEX_UNLOCK -+ -+ -+/** @name Time */ -+ -+/** Microsecond delay. -+ * -+ * @param usecs Microseconds to delay. -+ */ -+extern void DWC_UDELAY(uint32_t usecs); -+#define dwc_udelay DWC_UDELAY -+ -+/** Millisecond delay. -+ * -+ * @param msecs Milliseconds to delay. -+ */ -+extern void DWC_MDELAY(uint32_t msecs); -+#define dwc_mdelay DWC_MDELAY -+ -+/** Non-busy waiting. -+ * Sleeps for specified number of milliseconds. -+ * -+ * @param msecs Milliseconds to sleep. -+ */ -+extern void DWC_MSLEEP(uint32_t msecs); -+#define dwc_msleep DWC_MSLEEP -+ -+/** -+ * Returns number of milliseconds since boot. -+ */ -+extern uint32_t DWC_TIME(void); -+#define dwc_time DWC_TIME -+ -+ -+ -+ -+/* @mainpage DWC Portability and Common Library -+ * -+ * This is the documentation for the DWC Portability and Common Library. -+ * -+ * @section intro Introduction -+ * -+ * The DWC Portability library consists of wrapper calls and data structures to -+ * all low-level functions which are typically provided by the OS. The WUDEV -+ * driver uses only these functions. In order to port the WUDEV driver, only -+ * the functions in this library need to be re-implemented, with the same -+ * behavior as documented here. -+ * -+ * The Common library consists of higher level functions, which rely only on -+ * calling the functions from the DWC Portability library. These common -+ * routines are shared across modules. Some of the common libraries need to be -+ * used directly by the driver programmer when porting WUDEV. Such as the -+ * parameter and notification libraries. -+ * -+ * @section low Portability Library OS Wrapper Functions -+ * -+ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that -+ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of -+ * these functions are included in the dwc_os.h file. -+ * -+ * There are many functions here covering a wide array of OS services. Please -+ * see dwc_os.h for details, and implementation notes for each function. -+ * -+ * @section common Common Library Functions -+ * -+ * Any function starting with dwc and in all lowercase is a common library -+ * routine. These functions have a portable implementation and do not need to -+ * be reimplemented when porting. The common routines can be used by any -+ * driver, and some must be used by the end user to control the drivers. For -+ * example, you must use the Parameter common library in order to set the -+ * parameters in the WUDEV module. -+ * -+ * The common libraries consist of the following: -+ * -+ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h -+ * - Parameters - Used internally and can be used by end-user. See dwc_params.h -+ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h -+ * - Lists - Used internally and can be used by end-user. See dwc_list.h -+ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h -+ * - Modpow - Used internally only. See dwc_modpow.h -+ * - DH - Used internally only. See dwc_dh.h -+ * - Crypto - Used internally only. See dwc_crypto.h -+ * -+ * -+ * @section prereq Prerequistes For dwc_os.h -+ * @subsection types Data Types -+ * -+ * The dwc_os.h file assumes that several low-level data types are pre defined for the -+ * compilation environment. These data types are: -+ * -+ * - uint8_t - unsigned 8-bit data type -+ * - int8_t - signed 8-bit data type -+ * - uint16_t - unsigned 16-bit data type -+ * - int16_t - signed 16-bit data type -+ * - uint32_t - unsigned 32-bit data type -+ * - int32_t - signed 32-bit data type -+ * - uint64_t - unsigned 64-bit data type -+ * - int64_t - signed 64-bit data type -+ * -+ * Ensure that these are defined before using dwc_os.h. The easiest way to do -+ * that is to modify the top of the file to include the appropriate header. -+ * This is already done for the Linux environment. If the DWC_LINUX macro is -+ * defined, the correct header will be added. A standard header <stdint.h> is -+ * also used for environments where standard C headers are available. -+ * -+ * @subsection stdarg Variable Arguments -+ * -+ * Variable arguments are provided by a standard C header <stdarg.h>. it is -+ * available in Both the Linux and ANSI C enviornment. An equivalent must be -+ * provided in your enviornment in order to use dwc_os.h with the debug and -+ * tracing message functionality. -+ * -+ * @subsection thread Threading -+ * -+ * WUDEV Core must be run on an operating system that provides for multiple -+ * threads/processes. Threading can be implemented in many ways, even in -+ * embedded systems without an operating system. At the bare minimum, the -+ * system should be able to start any number of processes at any time to handle -+ * special work. It need not be a pre-emptive system. Process context can -+ * change upon a call to a blocking function. The hardware interrupt context -+ * that calls the module's ISR() function must be differentiable from process -+ * context, even if your processes are impemented via a hardware interrupt. -+ * Further locking mechanism between process must exist (or be implemented), and -+ * process context must have a way to disable interrupts for a period of time to -+ * lock them out. If all of this exists, the functions in dwc_os.h related to -+ * threading should be able to be implemented with the defined behavior. -+ * -+ */ -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _DWC_OS_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_common_port/usb.h -@@ -0,0 +1,946 @@ -+/* -+ * Copyright (c) 1998 The NetBSD Foundation, Inc. -+ * All rights reserved. -+ * -+ * This code is derived from software contributed to The NetBSD Foundation -+ * by Lennart Augustsson (lennart@augustsson.net) at -+ * Carlstedt Research & Technology. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. All advertising materials mentioning features or use of this software -+ * must display the following acknowledgement: -+ * This product includes software developed by the NetBSD -+ * Foundation, Inc. and its contributors. -+ * 4. Neither the name of The NetBSD Foundation nor the names of its -+ * contributors may be used to endorse or promote products derived -+ * from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS -+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED -+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS -+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -+ * POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+/* Modified by Synopsys, Inc, 12/12/2007 */ -+ -+ -+#ifndef _USB_H_ -+#define _USB_H_ -+ -+#ifdef __cplusplus -+extern "C" { -+#endif -+ -+/* -+ * The USB records contain some unaligned little-endian word -+ * components. The U[SG]ETW macros take care of both the alignment -+ * and endian problem and should always be used to access non-byte -+ * values. -+ */ -+typedef u_int8_t uByte; -+typedef u_int8_t uWord[2]; -+typedef u_int8_t uDWord[4]; -+ -+#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h)) -+#define UCONSTW(x) { (x) & 0xff, ((x) >> 8) & 0xff } -+#define UCONSTDW(x) { (x) & 0xff, ((x) >> 8) & 0xff, \ -+ ((x) >> 16) & 0xff, ((x) >> 24) & 0xff } -+ -+#if 1 -+#define UGETW(w) ((w)[0] | ((w)[1] << 8)) -+#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8)) -+#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24)) -+#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \ -+ (w)[1] = (u_int8_t)((v) >> 8), \ -+ (w)[2] = (u_int8_t)((v) >> 16), \ -+ (w)[3] = (u_int8_t)((v) >> 24)) -+#else -+/* -+ * On little-endian machines that can handle unanliged accesses -+ * (e.g. i386) these macros can be replaced by the following. -+ */ -+#define UGETW(w) (*(u_int16_t *)(w)) -+#define USETW(w,v) (*(u_int16_t *)(w) = (v)) -+#define UGETDW(w) (*(u_int32_t *)(w)) -+#define USETDW(w,v) (*(u_int32_t *)(w) = (v)) -+#endif -+ -+/* -+ * Macros for accessing UAS IU fields, which are big-endian -+ */ -+#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l)) -+#define IUCONSTW(x) { ((x) >> 8) & 0xff, (x) & 0xff } -+#define IUCONSTDW(x) { ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \ -+ ((x) >> 8) & 0xff, (x) & 0xff } -+#define IUGETW(w) (((w)[0] << 8) | (w)[1]) -+#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v)) -+#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3]) -+#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \ -+ (w)[1] = (u_int8_t)((v) >> 16), \ -+ (w)[2] = (u_int8_t)((v) >> 8), \ -+ (w)[3] = (u_int8_t)(v)) -+ -+#define UPACKED __attribute__((__packed__)) -+ -+typedef struct { -+ uByte bmRequestType; -+ uByte bRequest; -+ uWord wValue; -+ uWord wIndex; -+ uWord wLength; -+} UPACKED usb_device_request_t; -+ -+#define UT_GET_DIR(a) ((a) & 0x80) -+#define UT_WRITE 0x00 -+#define UT_READ 0x80 -+ -+#define UT_GET_TYPE(a) ((a) & 0x60) -+#define UT_STANDARD 0x00 -+#define UT_CLASS 0x20 -+#define UT_VENDOR 0x40 -+ -+#define UT_GET_RECIPIENT(a) ((a) & 0x1f) -+#define UT_DEVICE 0x00 -+#define UT_INTERFACE 0x01 -+#define UT_ENDPOINT 0x02 -+#define UT_OTHER 0x03 -+ -+#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE) -+#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) -+#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) -+#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE) -+#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) -+#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) -+#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE) -+#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) -+#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) -+#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) -+#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE) -+#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) -+#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) -+#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) -+#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE) -+#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) -+#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) -+#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) -+#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE) -+#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) -+#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) -+#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) -+ -+/* Requests */ -+#define UR_GET_STATUS 0x00 -+#define USTAT_STANDARD_STATUS 0x00 -+#define WUSTAT_WUSB_FEATURE 0x01 -+#define WUSTAT_CHANNEL_INFO 0x02 -+#define WUSTAT_RECEIVED_DATA 0x03 -+#define WUSTAT_MAS_AVAILABILITY 0x04 -+#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05 -+#define UR_CLEAR_FEATURE 0x01 -+#define UR_SET_FEATURE 0x03 -+#define UR_SET_AND_TEST_FEATURE 0x0c -+#define UR_SET_ADDRESS 0x05 -+#define UR_GET_DESCRIPTOR 0x06 -+#define UDESC_DEVICE 0x01 -+#define UDESC_CONFIG 0x02 -+#define UDESC_STRING 0x03 -+#define UDESC_INTERFACE 0x04 -+#define UDESC_ENDPOINT 0x05 -+#define UDESC_SS_USB_COMPANION 0x30 -+#define UDESC_DEVICE_QUALIFIER 0x06 -+#define UDESC_OTHER_SPEED_CONFIGURATION 0x07 -+#define UDESC_INTERFACE_POWER 0x08 -+#define UDESC_OTG 0x09 -+#define WUDESC_SECURITY 0x0c -+#define WUDESC_KEY 0x0d -+#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf) -+#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4) -+#define WUD_KEY_TYPE_ASSOC 0x01 -+#define WUD_KEY_TYPE_GTK 0x02 -+#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6) -+#define WUD_KEY_ORIGIN_HOST 0x00 -+#define WUD_KEY_ORIGIN_DEVICE 0x01 -+#define WUDESC_ENCRYPTION_TYPE 0x0e -+#define WUDESC_BOS 0x0f -+#define WUDESC_DEVICE_CAPABILITY 0x10 -+#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11 -+#define UDESC_BOS 0x0f -+#define UDESC_DEVICE_CAPABILITY 0x10 -+#define UDESC_CS_DEVICE 0x21 /* class specific */ -+#define UDESC_CS_CONFIG 0x22 -+#define UDESC_CS_STRING 0x23 -+#define UDESC_CS_INTERFACE 0x24 -+#define UDESC_CS_ENDPOINT 0x25 -+#define UDESC_HUB 0x29 -+#define UR_SET_DESCRIPTOR 0x07 -+#define UR_GET_CONFIG 0x08 -+#define UR_SET_CONFIG 0x09 -+#define UR_GET_INTERFACE 0x0a -+#define UR_SET_INTERFACE 0x0b -+#define UR_SYNCH_FRAME 0x0c -+#define WUR_SET_ENCRYPTION 0x0d -+#define WUR_GET_ENCRYPTION 0x0e -+#define WUR_SET_HANDSHAKE 0x0f -+#define WUR_GET_HANDSHAKE 0x10 -+#define WUR_SET_CONNECTION 0x11 -+#define WUR_SET_SECURITY_DATA 0x12 -+#define WUR_GET_SECURITY_DATA 0x13 -+#define WUR_SET_WUSB_DATA 0x14 -+#define WUDATA_DRPIE_INFO 0x01 -+#define WUDATA_TRANSMIT_DATA 0x02 -+#define WUDATA_TRANSMIT_PARAMS 0x03 -+#define WUDATA_RECEIVE_PARAMS 0x04 -+#define WUDATA_TRANSMIT_POWER 0x05 -+#define WUR_LOOPBACK_DATA_WRITE 0x15 -+#define WUR_LOOPBACK_DATA_READ 0x16 -+#define WUR_SET_INTERFACE_DS 0x17 -+ -+/* Feature numbers */ -+#define UF_ENDPOINT_HALT 0 -+#define UF_DEVICE_REMOTE_WAKEUP 1 -+#define UF_TEST_MODE 2 -+#define UF_DEVICE_B_HNP_ENABLE 3 -+#define UF_DEVICE_A_HNP_SUPPORT 4 -+#define UF_DEVICE_A_ALT_HNP_SUPPORT 5 -+#define WUF_WUSB 3 -+#define WUF_TX_DRPIE 0x0 -+#define WUF_DEV_XMIT_PACKET 0x1 -+#define WUF_COUNT_PACKETS 0x2 -+#define WUF_CAPTURE_PACKETS 0x3 -+#define UF_FUNCTION_SUSPEND 0 -+#define UF_U1_ENABLE 48 -+#define UF_U2_ENABLE 49 -+#define UF_LTM_ENABLE 50 -+ -+/* Class requests from the USB 2.0 hub spec, table 11-15 */ -+#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE) -+#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE) -+#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR) -+#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS) -+#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS) -+#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE) -+#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE) -+#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE) -+ -+#ifdef _MSC_VER -+#include <pshpack1.h> -+#endif -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDescriptorSubtype; -+} UPACKED usb_descriptor_t; -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+} UPACKED usb_descriptor_header_t; -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord bcdUSB; -+#define UD_USB_2_0 0x0200 -+#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0) -+ uByte bDeviceClass; -+ uByte bDeviceSubClass; -+ uByte bDeviceProtocol; -+ uByte bMaxPacketSize; -+ /* The fields below are not part of the initial descriptor. */ -+ uWord idVendor; -+ uWord idProduct; -+ uWord bcdDevice; -+ uByte iManufacturer; -+ uByte iProduct; -+ uByte iSerialNumber; -+ uByte bNumConfigurations; -+} UPACKED usb_device_descriptor_t; -+#define USB_DEVICE_DESCRIPTOR_SIZE 18 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord wTotalLength; -+ uByte bNumInterface; -+ uByte bConfigurationValue; -+ uByte iConfiguration; -+#define UC_ATT_ONE (1 << 7) /* must be set */ -+#define UC_ATT_SELFPOWER (1 << 6) /* self powered */ -+#define UC_ATT_WAKEUP (1 << 5) /* can wakeup */ -+#define UC_ATT_BATTERY (1 << 4) /* battery powered */ -+ uByte bmAttributes; -+#define UC_BUS_POWERED 0x80 -+#define UC_SELF_POWERED 0x40 -+#define UC_REMOTE_WAKEUP 0x20 -+ uByte bMaxPower; /* max current in 2 mA units */ -+#define UC_POWER_FACTOR 2 -+} UPACKED usb_config_descriptor_t; -+#define USB_CONFIG_DESCRIPTOR_SIZE 9 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bInterfaceNumber; -+ uByte bAlternateSetting; -+ uByte bNumEndpoints; -+ uByte bInterfaceClass; -+ uByte bInterfaceSubClass; -+ uByte bInterfaceProtocol; -+ uByte iInterface; -+} UPACKED usb_interface_descriptor_t; -+#define USB_INTERFACE_DESCRIPTOR_SIZE 9 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bEndpointAddress; -+#define UE_GET_DIR(a) ((a) & 0x80) -+#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) -+#define UE_DIR_IN 0x80 -+#define UE_DIR_OUT 0x00 -+#define UE_ADDR 0x0f -+#define UE_GET_ADDR(a) ((a) & UE_ADDR) -+ uByte bmAttributes; -+#define UE_XFERTYPE 0x03 -+#define UE_CONTROL 0x00 -+#define UE_ISOCHRONOUS 0x01 -+#define UE_BULK 0x02 -+#define UE_INTERRUPT 0x03 -+#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) -+#define UE_ISO_TYPE 0x0c -+#define UE_ISO_ASYNC 0x04 -+#define UE_ISO_ADAPT 0x08 -+#define UE_ISO_SYNC 0x0c -+#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) -+ uWord wMaxPacketSize; -+ uByte bInterval; -+} UPACKED usb_endpoint_descriptor_t; -+#define USB_ENDPOINT_DESCRIPTOR_SIZE 7 -+ -+typedef struct ss_endpoint_companion_descriptor { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bMaxBurst; -+#define USSE_GET_MAX_STREAMS(a) ((a) & 0x1f) -+#define USSE_SET_MAX_STREAMS(a, b) ((a) | ((b) & 0x1f)) -+#define USSE_GET_MAX_PACKET_NUM(a) ((a) & 0x03) -+#define USSE_SET_MAX_PACKET_NUM(a, b) ((a) | ((b) & 0x03)) -+ uByte bmAttributes; -+ uWord wBytesPerInterval; -+} UPACKED ss_endpoint_companion_descriptor_t; -+#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord bString[127]; -+} UPACKED usb_string_descriptor_t; -+#define USB_MAX_STRING_LEN 128 -+#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */ -+ -+/* Hub specific request */ -+#define UR_GET_BUS_STATE 0x02 -+#define UR_CLEAR_TT_BUFFER 0x08 -+#define UR_RESET_TT 0x09 -+#define UR_GET_TT_STATE 0x0a -+#define UR_STOP_TT 0x0b -+ -+/* Hub features */ -+#define UHF_C_HUB_LOCAL_POWER 0 -+#define UHF_C_HUB_OVER_CURRENT 1 -+#define UHF_PORT_CONNECTION 0 -+#define UHF_PORT_ENABLE 1 -+#define UHF_PORT_SUSPEND 2 -+#define UHF_PORT_OVER_CURRENT 3 -+#define UHF_PORT_RESET 4 -+#define UHF_PORT_L1 5 -+#define UHF_PORT_POWER 8 -+#define UHF_PORT_LOW_SPEED 9 -+#define UHF_PORT_HIGH_SPEED 10 -+#define UHF_C_PORT_CONNECTION 16 -+#define UHF_C_PORT_ENABLE 17 -+#define UHF_C_PORT_SUSPEND 18 -+#define UHF_C_PORT_OVER_CURRENT 19 -+#define UHF_C_PORT_RESET 20 -+#define UHF_C_PORT_L1 23 -+#define UHF_PORT_TEST 21 -+#define UHF_PORT_INDICATOR 22 -+ -+typedef struct { -+ uByte bDescLength; -+ uByte bDescriptorType; -+ uByte bNbrPorts; -+ uWord wHubCharacteristics; -+#define UHD_PWR 0x0003 -+#define UHD_PWR_GANGED 0x0000 -+#define UHD_PWR_INDIVIDUAL 0x0001 -+#define UHD_PWR_NO_SWITCH 0x0002 -+#define UHD_COMPOUND 0x0004 -+#define UHD_OC 0x0018 -+#define UHD_OC_GLOBAL 0x0000 -+#define UHD_OC_INDIVIDUAL 0x0008 -+#define UHD_OC_NONE 0x0010 -+#define UHD_TT_THINK 0x0060 -+#define UHD_TT_THINK_8 0x0000 -+#define UHD_TT_THINK_16 0x0020 -+#define UHD_TT_THINK_24 0x0040 -+#define UHD_TT_THINK_32 0x0060 -+#define UHD_PORT_IND 0x0080 -+ uByte bPwrOn2PwrGood; /* delay in 2 ms units */ -+#define UHD_PWRON_FACTOR 2 -+ uByte bHubContrCurrent; -+ uByte DeviceRemovable[32]; /* max 255 ports */ -+#define UHD_NOT_REMOV(desc, i) \ -+ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) -+ /* deprecated */ uByte PortPowerCtrlMask[1]; -+} UPACKED usb_hub_descriptor_t; -+#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */ -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord bcdUSB; -+ uByte bDeviceClass; -+ uByte bDeviceSubClass; -+ uByte bDeviceProtocol; -+ uByte bMaxPacketSize0; -+ uByte bNumConfigurations; -+ uByte bReserved; -+} UPACKED usb_device_qualifier_t; -+#define USB_DEVICE_QUALIFIER_SIZE 10 -+ -+typedef struct { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bmAttributes; -+#define UOTG_SRP 0x01 -+#define UOTG_HNP 0x02 -+} UPACKED usb_otg_descriptor_t; -+ -+/* OTG feature selectors */ -+#define UOTG_B_HNP_ENABLE 3 -+#define UOTG_A_HNP_SUPPORT 4 -+#define UOTG_A_ALT_HNP_SUPPORT 5 -+ -+typedef struct { -+ uWord wStatus; -+/* Device status flags */ -+#define UDS_SELF_POWERED 0x0001 -+#define UDS_REMOTE_WAKEUP 0x0002 -+/* Endpoint status flags */ -+#define UES_HALT 0x0001 -+} UPACKED usb_status_t; -+ -+typedef struct { -+ uWord wHubStatus; -+#define UHS_LOCAL_POWER 0x0001 -+#define UHS_OVER_CURRENT 0x0002 -+ uWord wHubChange; -+} UPACKED usb_hub_status_t; -+ -+typedef struct { -+ uWord wPortStatus; -+#define UPS_CURRENT_CONNECT_STATUS 0x0001 -+#define UPS_PORT_ENABLED 0x0002 -+#define UPS_SUSPEND 0x0004 -+#define UPS_OVERCURRENT_INDICATOR 0x0008 -+#define UPS_RESET 0x0010 -+#define UPS_PORT_POWER 0x0100 -+#define UPS_LOW_SPEED 0x0200 -+#define UPS_HIGH_SPEED 0x0400 -+#define UPS_PORT_TEST 0x0800 -+#define UPS_PORT_INDICATOR 0x1000 -+ uWord wPortChange; -+#define UPS_C_CONNECT_STATUS 0x0001 -+#define UPS_C_PORT_ENABLED 0x0002 -+#define UPS_C_SUSPEND 0x0004 -+#define UPS_C_OVERCURRENT_INDICATOR 0x0008 -+#define UPS_C_PORT_RESET 0x0010 -+} UPACKED usb_port_status_t; -+ -+#ifdef _MSC_VER -+#include <poppack.h> -+#endif -+ -+/* Device class codes */ -+#define UDCLASS_IN_INTERFACE 0x00 -+#define UDCLASS_COMM 0x02 -+#define UDCLASS_HUB 0x09 -+#define UDSUBCLASS_HUB 0x00 -+#define UDPROTO_FSHUB 0x00 -+#define UDPROTO_HSHUBSTT 0x01 -+#define UDPROTO_HSHUBMTT 0x02 -+#define UDCLASS_DIAGNOSTIC 0xdc -+#define UDCLASS_WIRELESS 0xe0 -+#define UDSUBCLASS_RF 0x01 -+#define UDPROTO_BLUETOOTH 0x01 -+#define UDCLASS_VENDOR 0xff -+ -+/* Interface class codes */ -+#define UICLASS_UNSPEC 0x00 -+ -+#define UICLASS_AUDIO 0x01 -+#define UISUBCLASS_AUDIOCONTROL 1 -+#define UISUBCLASS_AUDIOSTREAM 2 -+#define UISUBCLASS_MIDISTREAM 3 -+ -+#define UICLASS_CDC 0x02 /* communication */ -+#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 -+#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 -+#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 -+#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 -+#define UISUBCLASS_CAPI_CONTROLMODEL 5 -+#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 -+#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 -+#define UIPROTO_CDC_AT 1 -+ -+#define UICLASS_HID 0x03 -+#define UISUBCLASS_BOOT 1 -+#define UIPROTO_BOOT_KEYBOARD 1 -+ -+#define UICLASS_PHYSICAL 0x05 -+ -+#define UICLASS_IMAGE 0x06 -+ -+#define UICLASS_PRINTER 0x07 -+#define UISUBCLASS_PRINTER 1 -+#define UIPROTO_PRINTER_UNI 1 -+#define UIPROTO_PRINTER_BI 2 -+#define UIPROTO_PRINTER_1284 3 -+ -+#define UICLASS_MASS 0x08 -+#define UISUBCLASS_RBC 1 -+#define UISUBCLASS_SFF8020I 2 -+#define UISUBCLASS_QIC157 3 -+#define UISUBCLASS_UFI 4 -+#define UISUBCLASS_SFF8070I 5 -+#define UISUBCLASS_SCSI 6 -+#define UIPROTO_MASS_CBI_I 0 -+#define UIPROTO_MASS_CBI 1 -+#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ -+#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ -+ -+#define UICLASS_HUB 0x09 -+#define UISUBCLASS_HUB 0 -+#define UIPROTO_FSHUB 0 -+#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ -+#define UIPROTO_HSHUBMTT 1 -+ -+#define UICLASS_CDC_DATA 0x0a -+#define UISUBCLASS_DATA 0 -+#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ -+#define UIPROTO_DATA_HDLC 0x31 /* HDLC */ -+#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ -+#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ -+#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ -+#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ -+#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ -+#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ -+#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ -+#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ -+#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ -+#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/ -+#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ -+ -+#define UICLASS_SMARTCARD 0x0b -+ -+/*#define UICLASS_FIRM_UPD 0x0c*/ -+ -+#define UICLASS_SECURITY 0x0d -+ -+#define UICLASS_DIAGNOSTIC 0xdc -+ -+#define UICLASS_WIRELESS 0xe0 -+#define UISUBCLASS_RF 0x01 -+#define UIPROTO_BLUETOOTH 0x01 -+ -+#define UICLASS_APPL_SPEC 0xfe -+#define UISUBCLASS_FIRMWARE_DOWNLOAD 1 -+#define UISUBCLASS_IRDA 2 -+#define UIPROTO_IRDA 0 -+ -+#define UICLASS_VENDOR 0xff -+ -+#define USB_HUB_MAX_DEPTH 5 -+ -+/* -+ * Minimum time a device needs to be powered down to go through -+ * a power cycle. XXX Are these time in the spec? -+ */ -+#define USB_POWER_DOWN_TIME 200 /* ms */ -+#define USB_PORT_POWER_DOWN_TIME 100 /* ms */ -+ -+#if 0 -+/* These are the values from the spec. */ -+#define USB_PORT_RESET_DELAY 10 /* ms */ -+#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */ -+#define USB_PORT_RESET_RECOVERY 10 /* ms */ -+#define USB_PORT_POWERUP_DELAY 100 /* ms */ -+#define USB_SET_ADDRESS_SETTLE 2 /* ms */ -+#define USB_RESUME_DELAY (20*5) /* ms */ -+#define USB_RESUME_WAIT 10 /* ms */ -+#define USB_RESUME_RECOVERY 10 /* ms */ -+#define USB_EXTRA_POWER_UP_TIME 0 /* ms */ -+#else -+/* Allow for marginal (i.e. non-conforming) devices. */ -+#define USB_PORT_RESET_DELAY 50 /* ms */ -+#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */ -+#define USB_PORT_RESET_RECOVERY 250 /* ms */ -+#define USB_PORT_POWERUP_DELAY 300 /* ms */ -+#define USB_SET_ADDRESS_SETTLE 10 /* ms */ -+#define USB_RESUME_DELAY (50*5) /* ms */ -+#define USB_RESUME_WAIT 50 /* ms */ -+#define USB_RESUME_RECOVERY 50 /* ms */ -+#define USB_EXTRA_POWER_UP_TIME 20 /* ms */ -+#endif -+ -+#define USB_MIN_POWER 100 /* mA */ -+#define USB_MAX_POWER 500 /* mA */ -+ -+#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/ -+ -+#define USB_UNCONFIG_NO 0 -+#define USB_UNCONFIG_INDEX (-1) -+ -+/*** ioctl() related stuff ***/ -+ -+struct usb_ctl_request { -+ int ucr_addr; -+ usb_device_request_t ucr_request; -+ void *ucr_data; -+ int ucr_flags; -+#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */ -+ int ucr_actlen; /* actual length transferred */ -+}; -+ -+struct usb_alt_interface { -+ int uai_config_index; -+ int uai_interface_index; -+ int uai_alt_no; -+}; -+ -+#define USB_CURRENT_CONFIG_INDEX (-1) -+#define USB_CURRENT_ALT_INDEX (-1) -+ -+struct usb_config_desc { -+ int ucd_config_index; -+ usb_config_descriptor_t ucd_desc; -+}; -+ -+struct usb_interface_desc { -+ int uid_config_index; -+ int uid_interface_index; -+ int uid_alt_index; -+ usb_interface_descriptor_t uid_desc; -+}; -+ -+struct usb_endpoint_desc { -+ int ued_config_index; -+ int ued_interface_index; -+ int ued_alt_index; -+ int ued_endpoint_index; -+ usb_endpoint_descriptor_t ued_desc; -+}; -+ -+struct usb_full_desc { -+ int ufd_config_index; -+ u_int ufd_size; -+ u_char *ufd_data; -+}; -+ -+struct usb_string_desc { -+ int usd_string_index; -+ int usd_language_id; -+ usb_string_descriptor_t usd_desc; -+}; -+ -+struct usb_ctl_report_desc { -+ int ucrd_size; -+ u_char ucrd_data[1024]; /* filled data size will vary */ -+}; -+ -+typedef struct { u_int32_t cookie; } usb_event_cookie_t; -+ -+#define USB_MAX_DEVNAMES 4 -+#define USB_MAX_DEVNAMELEN 16 -+struct usb_device_info { -+ u_int8_t udi_bus; -+ u_int8_t udi_addr; /* device address */ -+ usb_event_cookie_t udi_cookie; -+ char udi_product[USB_MAX_STRING_LEN]; -+ char udi_vendor[USB_MAX_STRING_LEN]; -+ char udi_release[8]; -+ u_int16_t udi_productNo; -+ u_int16_t udi_vendorNo; -+ u_int16_t udi_releaseNo; -+ u_int8_t udi_class; -+ u_int8_t udi_subclass; -+ u_int8_t udi_protocol; -+ u_int8_t udi_config; -+ u_int8_t udi_speed; -+#define USB_SPEED_UNKNOWN 0 -+#define USB_SPEED_LOW 1 -+#define USB_SPEED_FULL 2 -+#define USB_SPEED_HIGH 3 -+#define USB_SPEED_VARIABLE 4 -+#define USB_SPEED_SUPER 5 -+ int udi_power; /* power consumption in mA, 0 if selfpowered */ -+ int udi_nports; -+ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN]; -+ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */ -+#define USB_PORT_ENABLED 0xff -+#define USB_PORT_SUSPENDED 0xfe -+#define USB_PORT_POWERED 0xfd -+#define USB_PORT_DISABLED 0xfc -+}; -+ -+struct usb_ctl_report { -+ int ucr_report; -+ u_char ucr_data[1024]; /* filled data size will vary */ -+}; -+ -+struct usb_device_stats { -+ u_long uds_requests[4]; /* indexed by transfer type UE_* */ -+}; -+ -+#define WUSB_MIN_IE 0x80 -+#define WUSB_WCTA_IE 0x80 -+#define WUSB_WCONNECTACK_IE 0x81 -+#define WUSB_WHOSTINFO_IE 0x82 -+#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3) -+#define WUHI_CA_RECONN 0x00 -+#define WUHI_CA_LIMITED 0x01 -+#define WUHI_CA_ALL 0x03 -+#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3) -+#define WUSB_WCHCHANGEANNOUNCE_IE 0x83 -+#define WUSB_WDEV_DISCONNECT_IE 0x84 -+#define WUSB_WHOST_DISCONNECT_IE 0x85 -+#define WUSB_WRELEASE_CHANNEL_IE 0x86 -+#define WUSB_WWORK_IE 0x87 -+#define WUSB_WCHANNEL_STOP_IE 0x88 -+#define WUSB_WDEV_KEEPALIVE_IE 0x89 -+#define WUSB_WISOCH_DISCARD_IE 0x8A -+#define WUSB_WRESETDEVICE_IE 0x8B -+#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C -+#define WUSB_MAX_IE 0x8C -+ -+/* Device Notification Types */ -+ -+#define WUSB_DN_MIN 0x01 -+#define WUSB_DN_CONNECT 0x01 -+# define WUSB_DA_OLDCONN 0x00 -+# define WUSB_DA_NEWCONN 0x01 -+# define WUSB_DA_SELF_BEACON 0x02 -+# define WUSB_DA_DIR_BEACON 0x04 -+# define WUSB_DA_NO_BEACON 0x06 -+#define WUSB_DN_DISCONNECT 0x02 -+#define WUSB_DN_EPRDY 0x03 -+#define WUSB_DN_MASAVAILCHANGED 0x04 -+#define WUSB_DN_REMOTEWAKEUP 0x05 -+#define WUSB_DN_SLEEP 0x06 -+#define WUSB_DN_ALIVE 0x07 -+#define WUSB_DN_MAX 0x07 -+ -+#ifdef _MSC_VER -+#include <pshpack1.h> -+#endif -+ -+/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */ -+typedef struct wusb_hndshk_data { -+ uByte bMessageNumber; -+ uByte bStatus; -+ uByte tTKID[3]; -+ uByte bReserved; -+ uByte CDID[16]; -+ uByte Nonce[16]; -+ uByte MIC[8]; -+} UPACKED wusb_hndshk_data_t; -+#define WUSB_HANDSHAKE_LEN_FOR_MIC 38 -+ -+/* WUSB Connection Context */ -+typedef struct wusb_conn_context { -+ uByte CHID [16]; -+ uByte CDID [16]; -+ uByte CK [16]; -+} UPACKED wusb_conn_context_t; -+ -+/* WUSB Security Descriptor */ -+typedef struct wusb_security_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord wTotalLength; -+ uByte bNumEncryptionTypes; -+} UPACKED wusb_security_desc_t; -+ -+/* WUSB Encryption Type Descriptor */ -+typedef struct wusb_encrypt_type_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ -+ uByte bEncryptionType; -+#define WUETD_UNSECURE 0 -+#define WUETD_WIRED 1 -+#define WUETD_CCM_1 2 -+#define WUETD_RSA_1 3 -+ -+ uByte bEncryptionValue; -+ uByte bAuthKeyIndex; -+} UPACKED wusb_encrypt_type_desc_t; -+ -+/* WUSB Key Descriptor */ -+typedef struct wusb_key_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte tTKID[3]; -+ uByte bReserved; -+ uByte KeyData[1]; /* variable length */ -+} UPACKED wusb_key_desc_t; -+ -+/* WUSB BOS Descriptor (Binary device Object Store) */ -+typedef struct wusb_bos_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uWord wTotalLength; -+ uByte bNumDeviceCaps; -+} UPACKED wusb_bos_desc_t; -+ -+#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02 -+typedef struct usb_dev_cap_20_ext_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+#define USB_20_EXT_LPM 0x02 -+ uDWord bmAttributes; -+} UPACKED usb_dev_cap_20_ext_desc_t; -+ -+#define USB_DEVICE_CAPABILITY_SS_USB 0x03 -+typedef struct usb_dev_cap_ss_usb { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+#define USB_DC_SS_USB_LTM_CAPABLE 0x02 -+ uByte bmAttributes; -+#define USB_DC_SS_USB_SPEED_SUPPORT_LOW 0x01 -+#define USB_DC_SS_USB_SPEED_SUPPORT_FULL 0x02 -+#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH 0x04 -+#define USB_DC_SS_USB_SPEED_SUPPORT_SS 0x08 -+ uWord wSpeedsSupported; -+ uByte bFunctionalitySupport; -+ uByte bU1DevExitLat; -+ uWord wU2DevExitLat; -+} UPACKED usb_dev_cap_ss_usb_t; -+ -+#define USB_DEVICE_CAPABILITY_CONTAINER_ID 0x04 -+typedef struct usb_dev_cap_container_id { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+ uByte bReserved; -+ uByte containerID[16]; -+} UPACKED usb_dev_cap_container_id_t; -+ -+/* Device Capability Type Codes */ -+#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01 -+ -+/* Device Capability Descriptor */ -+typedef struct wusb_dev_cap_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+ uByte caps[1]; /* Variable length */ -+} UPACKED wusb_dev_cap_desc_t; -+ -+/* Device Capability Descriptor */ -+typedef struct wusb_dev_cap_uwb_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bDevCapabilityType; -+ uByte bmAttributes; -+ uWord wPHYRates; /* Bitmap */ -+ uByte bmTFITXPowerInfo; -+ uByte bmFFITXPowerInfo; -+ uWord bmBandGroup; -+ uByte bReserved; -+} UPACKED wusb_dev_cap_uwb_desc_t; -+ -+/* Wireless USB Endpoint Companion Descriptor */ -+typedef struct wusb_endpoint_companion_desc { -+ uByte bLength; -+ uByte bDescriptorType; -+ uByte bMaxBurst; -+ uByte bMaxSequence; -+ uWord wMaxStreamDelay; -+ uWord wOverTheAirPacketSize; -+ uByte bOverTheAirInterval; -+ uByte bmCompAttributes; -+} UPACKED wusb_endpoint_companion_desc_t; -+ -+/* Wireless USB Numeric Association M1 Data Structure */ -+typedef struct wusb_m1_data { -+ uByte version; -+ uWord langId; -+ uByte deviceFriendlyNameLength; -+ uByte sha_256_m3[32]; -+ uByte deviceFriendlyName[256]; -+} UPACKED wusb_m1_data_t; -+ -+typedef struct wusb_m2_data { -+ uByte version; -+ uWord langId; -+ uByte hostFriendlyNameLength; -+ uByte pkh[384]; -+ uByte hostFriendlyName[256]; -+} UPACKED wusb_m2_data_t; -+ -+typedef struct wusb_m3_data { -+ uByte pkd[384]; -+ uByte nd; -+} UPACKED wusb_m3_data_t; -+ -+typedef struct wusb_m4_data { -+ uDWord _attributeTypeIdAndLength_1; -+ uWord associationTypeId; -+ -+ uDWord _attributeTypeIdAndLength_2; -+ uWord associationSubTypeId; -+ -+ uDWord _attributeTypeIdAndLength_3; -+ uDWord length; -+ -+ uDWord _attributeTypeIdAndLength_4; -+ uDWord associationStatus; -+ -+ uDWord _attributeTypeIdAndLength_5; -+ uByte chid[16]; -+ -+ uDWord _attributeTypeIdAndLength_6; -+ uByte cdid[16]; -+ -+ uDWord _attributeTypeIdAndLength_7; -+ uByte bandGroups[2]; -+} UPACKED wusb_m4_data_t; -+ -+#ifdef _MSC_VER -+#include <poppack.h> -+#endif -+ -+#ifdef __cplusplus -+} -+#endif -+ -+#endif /* _USB_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/Makefile -@@ -0,0 +1,82 @@ -+# -+# Makefile for DWC_otg Highspeed USB controller driver -+# -+ -+ifneq ($(KERNELRELEASE),) -+ -+# Use the BUS_INTERFACE variable to compile the software for either -+# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus. -+ifeq ($(BUS_INTERFACE),) -+# BUS_INTERFACE = -DPCI_INTERFACE -+# BUS_INTERFACE = -DLM_INTERFACE -+ BUS_INTERFACE = -DPLATFORM_INTERFACE -+endif -+ -+#ccflags-y += -DDEBUG -+#ccflags-y += -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs -+ -+# Use one of the following flags to compile the software in host-only or -+# device-only mode. -+#ccflags-y += -DDWC_HOST_ONLY -+#ccflags-y += -DDWC_DEVICE_ONLY -+ -+ccflags-y += -Dlinux -DDWC_HS_ELECT_TST -+#ccflags-y += -DDWC_EN_ISOC -+ccflags-y += -I$(obj)/../dwc_common_port -+#ccflags-y += -I$(PORTLIB) -+ccflags-y += -DDWC_LINUX -+ccflags-y += $(CFI) -+ccflags-y += $(BUS_INTERFACE) -+#ccflags-y += -DDWC_DEV_SRPCAP -+ -+obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o -+ -+dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o -+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o -+dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o -+dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o -+dwc_otg-objs += dwc_otg_adp.o -+dwc_otg-objs += dwc_otg_fiq_fsm.o -+dwc_otg-objs += dwc_otg_fiq_stub.o -+ifneq ($(CFI),) -+dwc_otg-objs += dwc_otg_cfi.o -+endif -+ -+kernrelwd := $(subst ., ,$(KERNELRELEASE)) -+kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd)) -+ -+ifneq ($(kernrel3),2.6.20) -+ccflags-y += $(CPPFLAGS) -+endif -+ -+else -+ -+PWD := $(shell pwd) -+PORTLIB := $(PWD)/../dwc_common_port -+ -+# Command paths -+CTAGS := $(CTAGS) -+DOXYGEN := $(DOXYGEN) -+ -+default: portlib -+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ -+install: default -+ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install -+ $(MAKE) -C$(KDIR) M=$(PWD) modules_install -+ -+portlib: -+ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules -+ cp $(PORTLIB)/Module.symvers $(PWD)/ -+ -+docs: $(wildcard *.[hc]) doc/doxygen.cfg -+ $(DOXYGEN) doc/doxygen.cfg -+ -+tags: $(wildcard *.[hc]) -+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h) -+ -+ -+clean: -+ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers -+ -+endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg -@@ -0,0 +1,224 @@ -+# Doxyfile 1.3.9.1 -+ -+#--------------------------------------------------------------------------- -+# Project related configuration options -+#--------------------------------------------------------------------------- -+PROJECT_NAME = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver" -+PROJECT_NUMBER = v3.00a -+OUTPUT_DIRECTORY = ./doc/ -+CREATE_SUBDIRS = NO -+OUTPUT_LANGUAGE = English -+BRIEF_MEMBER_DESC = YES -+REPEAT_BRIEF = YES -+ABBREVIATE_BRIEF = "The $name class" \ -+ "The $name widget" \ -+ "The $name file" \ -+ is \ -+ provides \ -+ specifies \ -+ contains \ -+ represents \ -+ a \ -+ an \ -+ the -+ALWAYS_DETAILED_SEC = NO -+INLINE_INHERITED_MEMB = NO -+FULL_PATH_NAMES = NO -+STRIP_FROM_PATH = -+STRIP_FROM_INC_PATH = -+SHORT_NAMES = NO -+JAVADOC_AUTOBRIEF = YES -+MULTILINE_CPP_IS_BRIEF = NO -+INHERIT_DOCS = YES -+DISTRIBUTE_GROUP_DOC = NO -+TAB_SIZE = 8 -+ALIASES = -+OPTIMIZE_OUTPUT_FOR_C = YES -+OPTIMIZE_OUTPUT_JAVA = NO -+SUBGROUPING = YES -+#--------------------------------------------------------------------------- -+# Build related configuration options -+#--------------------------------------------------------------------------- -+EXTRACT_ALL = NO -+EXTRACT_PRIVATE = YES -+EXTRACT_STATIC = YES -+EXTRACT_LOCAL_CLASSES = YES -+EXTRACT_LOCAL_METHODS = NO -+HIDE_UNDOC_MEMBERS = NO -+HIDE_UNDOC_CLASSES = NO -+HIDE_FRIEND_COMPOUNDS = NO -+HIDE_IN_BODY_DOCS = NO -+INTERNAL_DOCS = NO -+CASE_SENSE_NAMES = NO -+HIDE_SCOPE_NAMES = NO -+SHOW_INCLUDE_FILES = YES -+INLINE_INFO = YES -+SORT_MEMBER_DOCS = NO -+SORT_BRIEF_DOCS = NO -+SORT_BY_SCOPE_NAME = NO -+GENERATE_TODOLIST = YES -+GENERATE_TESTLIST = YES -+GENERATE_BUGLIST = YES -+GENERATE_DEPRECATEDLIST= YES -+ENABLED_SECTIONS = -+MAX_INITIALIZER_LINES = 30 -+SHOW_USED_FILES = YES -+SHOW_DIRECTORIES = YES -+#--------------------------------------------------------------------------- -+# configuration options related to warning and progress messages -+#--------------------------------------------------------------------------- -+QUIET = YES -+WARNINGS = YES -+WARN_IF_UNDOCUMENTED = NO -+WARN_IF_DOC_ERROR = YES -+WARN_FORMAT = "$file:$line: $text" -+WARN_LOGFILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the input files -+#--------------------------------------------------------------------------- -+INPUT = . -+FILE_PATTERNS = *.c \ -+ *.h \ -+ ./linux/*.c \ -+ ./linux/*.h -+RECURSIVE = NO -+EXCLUDE = ./test/ \ -+ ./dwc_otg/.AppleDouble/ -+EXCLUDE_SYMLINKS = YES -+EXCLUDE_PATTERNS = *.mod.* -+EXAMPLE_PATH = -+EXAMPLE_PATTERNS = * -+EXAMPLE_RECURSIVE = NO -+IMAGE_PATH = -+INPUT_FILTER = -+FILTER_PATTERNS = -+FILTER_SOURCE_FILES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to source browsing -+#--------------------------------------------------------------------------- -+SOURCE_BROWSER = YES -+INLINE_SOURCES = NO -+STRIP_CODE_COMMENTS = YES -+REFERENCED_BY_RELATION = NO -+REFERENCES_RELATION = NO -+VERBATIM_HEADERS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the alphabetical class index -+#--------------------------------------------------------------------------- -+ALPHABETICAL_INDEX = NO -+COLS_IN_ALPHA_INDEX = 5 -+IGNORE_PREFIX = -+#--------------------------------------------------------------------------- -+# configuration options related to the HTML output -+#--------------------------------------------------------------------------- -+GENERATE_HTML = YES -+HTML_OUTPUT = html -+HTML_FILE_EXTENSION = .html -+HTML_HEADER = -+HTML_FOOTER = -+HTML_STYLESHEET = -+HTML_ALIGN_MEMBERS = YES -+GENERATE_HTMLHELP = NO -+CHM_FILE = -+HHC_LOCATION = -+GENERATE_CHI = NO -+BINARY_TOC = NO -+TOC_EXPAND = NO -+DISABLE_INDEX = NO -+ENUM_VALUES_PER_LINE = 4 -+GENERATE_TREEVIEW = YES -+TREEVIEW_WIDTH = 250 -+#--------------------------------------------------------------------------- -+# configuration options related to the LaTeX output -+#--------------------------------------------------------------------------- -+GENERATE_LATEX = NO -+LATEX_OUTPUT = latex -+LATEX_CMD_NAME = latex -+MAKEINDEX_CMD_NAME = makeindex -+COMPACT_LATEX = NO -+PAPER_TYPE = a4wide -+EXTRA_PACKAGES = -+LATEX_HEADER = -+PDF_HYPERLINKS = NO -+USE_PDFLATEX = NO -+LATEX_BATCHMODE = NO -+LATEX_HIDE_INDICES = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the RTF output -+#--------------------------------------------------------------------------- -+GENERATE_RTF = NO -+RTF_OUTPUT = rtf -+COMPACT_RTF = NO -+RTF_HYPERLINKS = NO -+RTF_STYLESHEET_FILE = -+RTF_EXTENSIONS_FILE = -+#--------------------------------------------------------------------------- -+# configuration options related to the man page output -+#--------------------------------------------------------------------------- -+GENERATE_MAN = NO -+MAN_OUTPUT = man -+MAN_EXTENSION = .3 -+MAN_LINKS = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the XML output -+#--------------------------------------------------------------------------- -+GENERATE_XML = NO -+XML_OUTPUT = xml -+XML_SCHEMA = -+XML_DTD = -+XML_PROGRAMLISTING = YES -+#--------------------------------------------------------------------------- -+# configuration options for the AutoGen Definitions output -+#--------------------------------------------------------------------------- -+GENERATE_AUTOGEN_DEF = NO -+#--------------------------------------------------------------------------- -+# configuration options related to the Perl module output -+#--------------------------------------------------------------------------- -+GENERATE_PERLMOD = NO -+PERLMOD_LATEX = NO -+PERLMOD_PRETTY = YES -+PERLMOD_MAKEVAR_PREFIX = -+#--------------------------------------------------------------------------- -+# Configuration options related to the preprocessor -+#--------------------------------------------------------------------------- -+ENABLE_PREPROCESSING = YES -+MACRO_EXPANSION = YES -+EXPAND_ONLY_PREDEF = YES -+SEARCH_INCLUDES = YES -+INCLUDE_PATH = -+INCLUDE_FILE_PATTERNS = -+PREDEFINED = DEVICE_ATTR DWC_EN_ISOC -+EXPAND_AS_DEFINED = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC -+SKIP_FUNCTION_MACROS = NO -+#--------------------------------------------------------------------------- -+# Configuration::additions related to external references -+#--------------------------------------------------------------------------- -+TAGFILES = -+GENERATE_TAGFILE = -+ALLEXTERNALS = NO -+EXTERNAL_GROUPS = YES -+PERL_PATH = /usr/bin/perl -+#--------------------------------------------------------------------------- -+# Configuration options related to the dot tool -+#--------------------------------------------------------------------------- -+CLASS_DIAGRAMS = YES -+HIDE_UNDOC_RELATIONS = YES -+HAVE_DOT = NO -+CLASS_GRAPH = YES -+COLLABORATION_GRAPH = YES -+UML_LOOK = NO -+TEMPLATE_RELATIONS = NO -+INCLUDE_GRAPH = YES -+INCLUDED_BY_GRAPH = YES -+CALL_GRAPH = NO -+GRAPHICAL_HIERARCHY = YES -+DOT_IMAGE_FORMAT = png -+DOT_PATH = -+DOTFILE_DIRS = -+MAX_DOT_GRAPH_DEPTH = 1000 -+GENERATE_LEGEND = YES -+DOT_CLEANUP = YES -+#--------------------------------------------------------------------------- -+# Configuration::additions related to the search engine -+#--------------------------------------------------------------------------- -+SEARCHENGINE = NO ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dummy_audio.c -@@ -0,0 +1,1574 @@ -+/* -+ * zero.c -- Gadget Zero, for USB development -+ * -+ * Copyright (C) 2003-2004 David Brownell -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions -+ * are met: -+ * 1. Redistributions of source code must retain the above copyright -+ * notice, this list of conditions, and the following disclaimer, -+ * without modification. -+ * 2. Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * 3. The names of the above-listed copyright holders may not be used -+ * to endorse or promote products derived from this software without -+ * specific prior written permission. -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS -+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, -+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR -+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, -+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR -+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF -+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING -+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+/* -+ * Gadget Zero only needs two bulk endpoints, and is an example of how you -+ * can write a hardware-agnostic gadget driver running inside a USB device. -+ * -+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't -+ * affect most of the driver. -+ * -+ * Use it with the Linux host/master side "usbtest" driver to get a basic -+ * functional test of your device-side usb stack, or with "usb-skeleton". -+ * -+ * It supports two similar configurations. One sinks whatever the usb host -+ * writes, and in return sources zeroes. The other loops whatever the host -+ * writes back, so the host can read it. Module options include: -+ * -+ * buflen=N default N=4096, buffer size used -+ * qlen=N default N=32, how many buffers in the loopback queue -+ * loopdefault default false, list loopback config first -+ * -+ * Many drivers will only have one configuration, letting them be much -+ * simpler if they also don't support high speed operation (like this -+ * driver does). -+ */ -+ -+#include <linux/config.h> -+#include <linux/module.h> -+#include <linux/kernel.h> -+#include <linux/delay.h> -+#include <linux/ioport.h> -+#include <linux/sched.h> -+#include <linux/slab.h> -+#include <linux/smp_lock.h> -+#include <linux/errno.h> -+#include <linux/init.h> -+#include <linux/timer.h> -+#include <linux/list.h> -+#include <linux/interrupt.h> -+#include <linux/uts.h> -+#include <linux/version.h> -+#include <linux/device.h> -+#include <linux/moduleparam.h> -+#include <linux/proc_fs.h> -+ -+#include <asm/byteorder.h> -+#include <asm/io.h> -+#include <asm/irq.h> -+#include <asm/system.h> -+#include <asm/unaligned.h> -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -+# include <linux/usb/ch9.h> -+#else -+# include <linux/usb_ch9.h> -+#endif -+ -+#include <linux/usb_gadget.h> -+ -+ -+/*-------------------------------------------------------------------------*/ -+/*-------------------------------------------------------------------------*/ -+ -+ -+static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) -+{ -+ int count = 0; -+ u8 c; -+ u16 uchar; -+ -+ /* this insists on correct encodings, though not minimal ones. -+ * BUT it currently rejects legit 4-byte UTF-8 code points, -+ * which need surrogate pairs. (Unicode 3.1 can use them.) -+ */ -+ while (len != 0 && (c = (u8) *s++) != 0) { -+ if (unlikely(c & 0x80)) { -+ // 2-byte sequence: -+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx -+ if ((c & 0xe0) == 0xc0) { -+ uchar = (c & 0x1f) << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ // 3-byte sequence (most CJKV characters): -+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx -+ } else if ((c & 0xf0) == 0xe0) { -+ uchar = (c & 0x0f) << 12; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c << 6; -+ -+ c = (u8) *s++; -+ if ((c & 0xc0) != 0xc0) -+ goto fail; -+ c &= 0x3f; -+ uchar |= c; -+ -+ /* no bogus surrogates */ -+ if (0xd800 <= uchar && uchar <= 0xdfff) -+ goto fail; -+ -+ // 4-byte sequence (surrogate pairs, currently rare): -+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx -+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx -+ // (uuuuu = wwww + 1) -+ // FIXME accept the surrogate code points (only) -+ -+ } else -+ goto fail; -+ } else -+ uchar = c; -+ put_unaligned (cpu_to_le16 (uchar), cp++); -+ count++; -+ len--; -+ } -+ return count; -+fail: -+ return -1; -+} -+ -+ -+/** -+ * usb_gadget_get_string - fill out a string descriptor -+ * @table: of c strings encoded using UTF-8 -+ * @id: string id, from low byte of wValue in get string descriptor -+ * @buf: at least 256 bytes -+ * -+ * Finds the UTF-8 string matching the ID, and converts it into a -+ * string descriptor in utf16-le. -+ * Returns length of descriptor (always even) or negative errno -+ * -+ * If your driver needs stings in multiple languages, you'll probably -+ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, -+ * using this routine after choosing which set of UTF-8 strings to use. -+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with -+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 -+ * characters (which are also widely used in C strings). -+ */ -+int -+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) -+{ -+ struct usb_string *s; -+ int len; -+ -+ /* descriptor 0 has the language id */ -+ if (id == 0) { -+ buf [0] = 4; -+ buf [1] = USB_DT_STRING; -+ buf [2] = (u8) table->language; -+ buf [3] = (u8) (table->language >> 8); -+ return 4; -+ } -+ for (s = table->strings; s && s->s; s++) -+ if (s->id == id) -+ break; -+ -+ /* unrecognized: stall. */ -+ if (!s || !s->s) -+ return -EINVAL; -+ -+ /* string descriptors have length, tag, then UTF16-LE text */ -+ len = min ((size_t) 126, strlen (s->s)); -+ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ -+ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); -+ if (len < 0) -+ return -EINVAL; -+ buf [0] = (len + 1) * 2; -+ buf [1] = USB_DT_STRING; -+ return buf [0]; -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+/*-------------------------------------------------------------------------*/ -+ -+ -+/** -+ * usb_descriptor_fillbuf - fill buffer with descriptors -+ * @buf: Buffer to be filled -+ * @buflen: Size of buf -+ * @src: Array of descriptor pointers, terminated by null pointer. -+ * -+ * Copies descriptors into the buffer, returning the length or a -+ * negative error code if they can't all be copied. Useful when -+ * assembling descriptors for an associated set of interfaces used -+ * as part of configuring a composite device; or in other cases where -+ * sets of descriptors need to be marshaled. -+ */ -+int -+usb_descriptor_fillbuf(void *buf, unsigned buflen, -+ const struct usb_descriptor_header **src) -+{ -+ u8 *dest = buf; -+ -+ if (!src) -+ return -EINVAL; -+ -+ /* fill buffer from src[] until null descriptor ptr */ -+ for (; 0 != *src; src++) { -+ unsigned len = (*src)->bLength; -+ -+ if (len > buflen) -+ return -EINVAL; -+ memcpy(dest, *src, len); -+ buflen -= len; -+ dest += len; -+ } -+ return dest - (u8 *)buf; -+} -+ -+ -+/** -+ * usb_gadget_config_buf - builts a complete configuration descriptor -+ * @config: Header for the descriptor, including characteristics such -+ * as power requirements and number of interfaces. -+ * @desc: Null-terminated vector of pointers to the descriptors (interface, -+ * endpoint, etc) defining all functions in this device configuration. -+ * @buf: Buffer for the resulting configuration descriptor. -+ * @length: Length of buffer. If this is not big enough to hold the -+ * entire configuration descriptor, an error code will be returned. -+ * -+ * This copies descriptors into the response buffer, building a descriptor -+ * for that configuration. It returns the buffer length or a negative -+ * status code. The config.wTotalLength field is set to match the length -+ * of the result, but other descriptor fields (including power usage and -+ * interface count) must be set by the caller. -+ * -+ * Gadget drivers could use this when constructing a config descriptor -+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the -+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. -+ */ -+int usb_gadget_config_buf( -+ const struct usb_config_descriptor *config, -+ void *buf, -+ unsigned length, -+ const struct usb_descriptor_header **desc -+) -+{ -+ struct usb_config_descriptor *cp = buf; -+ int len; -+ -+ /* config descriptor first */ -+ if (length < USB_DT_CONFIG_SIZE || !desc) -+ return -EINVAL; -+ *cp = *config; -+ -+ /* then interface/endpoint/class/vendor/... */ -+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, -+ length - USB_DT_CONFIG_SIZE, desc); -+ if (len < 0) -+ return len; -+ len += USB_DT_CONFIG_SIZE; -+ if (len > 0xffff) -+ return -EINVAL; -+ -+ /* patch up the config descriptor */ -+ cp->bLength = USB_DT_CONFIG_SIZE; -+ cp->bDescriptorType = USB_DT_CONFIG; -+ cp->wTotalLength = cpu_to_le16(len); -+ cp->bmAttributes |= USB_CONFIG_ATT_ONE; -+ return len; -+} -+ -+/*-------------------------------------------------------------------------*/ -+/*-------------------------------------------------------------------------*/ -+ -+ -+#define RBUF_LEN (1024*1024) -+static int rbuf_start; -+static int rbuf_len; -+static __u8 rbuf[RBUF_LEN]; -+ -+/*-------------------------------------------------------------------------*/ -+ -+#define DRIVER_VERSION "St Patrick's Day 2004" -+ -+static const char shortname [] = "zero"; -+static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; -+ -+static const char source_sink [] = "source and sink data"; -+static const char loopback [] = "loop input to output"; -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* -+ * driver assumes self-powered hardware, and -+ * has no way for users to trigger remote wakeup. -+ * -+ * this version autoconfigures as much as possible, -+ * which is reasonable for most "bulk-only" drivers. -+ */ -+static const char *EP_IN_NAME; /* source */ -+static const char *EP_OUT_NAME; /* sink */ -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* big enough to hold our biggest descriptor */ -+#define USB_BUFSIZ 512 -+ -+struct zero_dev { -+ spinlock_t lock; -+ struct usb_gadget *gadget; -+ struct usb_request *req; /* for control responses */ -+ -+ /* when configured, we have one of two configs: -+ * - source data (in to host) and sink it (out from host) -+ * - or loop it back (out from host back in to host) -+ */ -+ u8 config; -+ struct usb_ep *in_ep, *out_ep; -+ -+ /* autoresume timer */ -+ struct timer_list resume; -+}; -+ -+#define xprintk(d,level,fmt,args...) \ -+ dev_printk(level , &(d)->gadget->dev , fmt , ## args) -+ -+#ifdef DEBUG -+#define DBG(dev,fmt,args...) \ -+ xprintk(dev , KERN_DEBUG , fmt , ## args) -+#else -+#define DBG(dev,fmt,args...) \ -+ do { } while (0) -+#endif /* DEBUG */ -+ -+#ifdef VERBOSE -+#define VDBG DBG -+#else -+#define VDBG(dev,fmt,args...) \ -+ do { } while (0) -+#endif /* VERBOSE */ -+ -+#define ERROR(dev,fmt,args...) \ -+ xprintk(dev , KERN_ERR , fmt , ## args) -+#define WARN(dev,fmt,args...) \ -+ xprintk(dev , KERN_WARNING , fmt , ## args) -+#define INFO(dev,fmt,args...) \ -+ xprintk(dev , KERN_INFO , fmt , ## args) -+ -+/*-------------------------------------------------------------------------*/ -+ -+static unsigned buflen = 4096; -+static unsigned qlen = 32; -+static unsigned pattern = 0; -+ -+module_param (buflen, uint, S_IRUGO|S_IWUSR); -+module_param (qlen, uint, S_IRUGO|S_IWUSR); -+module_param (pattern, uint, S_IRUGO|S_IWUSR); -+ -+/* -+ * if it's nonzero, autoresume says how many seconds to wait -+ * before trying to wake up the host after suspend. -+ */ -+static unsigned autoresume = 0; -+module_param (autoresume, uint, 0); -+ -+/* -+ * Normally the "loopback" configuration is second (index 1) so -+ * it's not the default. Here's where to change that order, to -+ * work better with hosts where config changes are problematic. -+ * Or controllers (like superh) that only support one config. -+ */ -+static int loopdefault = 0; -+ -+module_param (loopdefault, bool, S_IRUGO|S_IWUSR); -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* Thanks to NetChip Technologies for donating this product ID. -+ * -+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! -+ * Instead: allocate your own, using normal USB-IF procedures. -+ */ -+#ifndef CONFIG_USB_ZERO_HNPTEST -+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ -+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ -+#else -+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ -+#define DRIVER_PRODUCT_NUM 0xbadd -+#endif -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* -+ * DESCRIPTORS ... most are static, but strings and (full) -+ * configuration descriptors are built on demand. -+ */ -+ -+/* -+#define STRING_MANUFACTURER 25 -+#define STRING_PRODUCT 42 -+#define STRING_SERIAL 101 -+*/ -+#define STRING_MANUFACTURER 1 -+#define STRING_PRODUCT 2 -+#define STRING_SERIAL 3 -+ -+#define STRING_SOURCE_SINK 250 -+#define STRING_LOOPBACK 251 -+ -+/* -+ * This device advertises two configurations; these numbers work -+ * on a pxa250 as well as more flexible hardware. -+ */ -+#define CONFIG_SOURCE_SINK 3 -+#define CONFIG_LOOPBACK 2 -+ -+/* -+static struct usb_device_descriptor -+device_desc = { -+ .bLength = sizeof device_desc, -+ .bDescriptorType = USB_DT_DEVICE, -+ -+ .bcdUSB = __constant_cpu_to_le16 (0x0200), -+ .bDeviceClass = USB_CLASS_VENDOR_SPEC, -+ -+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), -+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), -+ .iManufacturer = STRING_MANUFACTURER, -+ .iProduct = STRING_PRODUCT, -+ .iSerialNumber = STRING_SERIAL, -+ .bNumConfigurations = 2, -+}; -+*/ -+static struct usb_device_descriptor -+device_desc = { -+ .bLength = sizeof device_desc, -+ .bDescriptorType = USB_DT_DEVICE, -+ .bcdUSB = __constant_cpu_to_le16 (0x0100), -+ .bDeviceClass = USB_CLASS_PER_INTERFACE, -+ .bDeviceSubClass = 0, -+ .bDeviceProtocol = 0, -+ .bMaxPacketSize0 = 64, -+ .bcdDevice = __constant_cpu_to_le16 (0x0100), -+ .idVendor = __constant_cpu_to_le16 (0x0499), -+ .idProduct = __constant_cpu_to_le16 (0x3002), -+ .iManufacturer = STRING_MANUFACTURER, -+ .iProduct = STRING_PRODUCT, -+ .iSerialNumber = STRING_SERIAL, -+ .bNumConfigurations = 1, -+}; -+ -+static struct usb_config_descriptor -+z_config = { -+ .bLength = sizeof z_config, -+ .bDescriptorType = USB_DT_CONFIG, -+ -+ /* compute wTotalLength on the fly */ -+ .bNumInterfaces = 2, -+ .bConfigurationValue = 1, -+ .iConfiguration = 0, -+ .bmAttributes = 0x40, -+ .bMaxPower = 0, /* self-powered */ -+}; -+ -+ -+static struct usb_otg_descriptor -+otg_descriptor = { -+ .bLength = sizeof otg_descriptor, -+ .bDescriptorType = USB_DT_OTG, -+ -+ .bmAttributes = USB_OTG_SRP, -+}; -+ -+/* one interface in each configuration */ -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ -+/* -+ * usb 2.0 devices need to expose both high speed and full speed -+ * descriptors, unless they only run at full speed. -+ * -+ * that means alternate endpoint descriptors (bigger packets) -+ * and a "device qualifier" ... plus more construction options -+ * for the config descriptor. -+ */ -+ -+static struct usb_qualifier_descriptor -+dev_qualifier = { -+ .bLength = sizeof dev_qualifier, -+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, -+ -+ .bcdUSB = __constant_cpu_to_le16 (0x0200), -+ .bDeviceClass = USB_CLASS_VENDOR_SPEC, -+ -+ .bNumConfigurations = 2, -+}; -+ -+ -+struct usb_cs_as_general_descriptor { -+ __u8 bLength; -+ __u8 bDescriptorType; -+ -+ __u8 bDescriptorSubType; -+ __u8 bTerminalLink; -+ __u8 bDelay; -+ __u16 wFormatTag; -+} __attribute__ ((packed)); -+ -+struct usb_cs_as_format_descriptor { -+ __u8 bLength; -+ __u8 bDescriptorType; -+ -+ __u8 bDescriptorSubType; -+ __u8 bFormatType; -+ __u8 bNrChannels; -+ __u8 bSubframeSize; -+ __u8 bBitResolution; -+ __u8 bSamfreqType; -+ __u8 tLowerSamFreq[3]; -+ __u8 tUpperSamFreq[3]; -+} __attribute__ ((packed)); -+ -+static const struct usb_interface_descriptor -+z_audio_control_if_desc = { -+ .bLength = sizeof z_audio_control_if_desc, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 0, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = 0, -+ .bInterfaceClass = USB_CLASS_AUDIO, -+ .bInterfaceSubClass = 0x1, -+ .bInterfaceProtocol = 0, -+ .iInterface = 0, -+}; -+ -+static const struct usb_interface_descriptor -+z_audio_if_desc = { -+ .bLength = sizeof z_audio_if_desc, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 1, -+ .bAlternateSetting = 0, -+ .bNumEndpoints = 0, -+ .bInterfaceClass = USB_CLASS_AUDIO, -+ .bInterfaceSubClass = 0x2, -+ .bInterfaceProtocol = 0, -+ .iInterface = 0, -+}; -+ -+static const struct usb_interface_descriptor -+z_audio_if_desc2 = { -+ .bLength = sizeof z_audio_if_desc, -+ .bDescriptorType = USB_DT_INTERFACE, -+ .bInterfaceNumber = 1, -+ .bAlternateSetting = 1, -+ .bNumEndpoints = 1, -+ .bInterfaceClass = USB_CLASS_AUDIO, -+ .bInterfaceSubClass = 0x2, -+ .bInterfaceProtocol = 0, -+ .iInterface = 0, -+}; -+ -+static const struct usb_cs_as_general_descriptor -+z_audio_cs_as_if_desc = { -+ .bLength = 7, -+ .bDescriptorType = 0x24, -+ -+ .bDescriptorSubType = 0x01, -+ .bTerminalLink = 0x01, -+ .bDelay = 0x0, -+ .wFormatTag = __constant_cpu_to_le16 (0x0001) -+}; -+ -+ -+static const struct usb_cs_as_format_descriptor -+z_audio_cs_as_format_desc = { -+ .bLength = 0xe, -+ .bDescriptorType = 0x24, -+ -+ .bDescriptorSubType = 2, -+ .bFormatType = 1, -+ .bNrChannels = 1, -+ .bSubframeSize = 1, -+ .bBitResolution = 8, -+ .bSamfreqType = 0, -+ .tLowerSamFreq = {0x7e, 0x13, 0x00}, -+ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, -+}; -+ -+static const struct usb_endpoint_descriptor -+z_iso_ep = { -+ .bLength = 0x09, -+ .bDescriptorType = 0x05, -+ .bEndpointAddress = 0x04, -+ .bmAttributes = 0x09, -+ .wMaxPacketSize = 0x0038, -+ .bInterval = 0x01, -+ .bRefresh = 0x00, -+ .bSynchAddress = 0x00, -+}; -+ -+static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+// 9 bytes -+static char z_ac_interface_header_desc[] = -+{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; -+ -+// 12 bytes -+static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, -+ 0x03, 0x00, 0x00, 0x00}; -+// 13 bytes -+static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, -+ 0x02, 0x00, 0x02, 0x00, 0x00}; -+// 9 bytes -+static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, -+ 0x00}; -+ -+static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, -+ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, -+ 0x00}; -+ -+static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, -+ 0x00}; -+ -+static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; -+ -+static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, -+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; -+ -+static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, -+ 0x00}; -+ -+static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; -+ -+ -+ -+static const struct usb_descriptor_header *z_function [] = { -+ (struct usb_descriptor_header *) &z_audio_control_if_desc, -+ (struct usb_descriptor_header *) &z_ac_interface_header_desc, -+ (struct usb_descriptor_header *) &z_0, -+ (struct usb_descriptor_header *) &z_1, -+ (struct usb_descriptor_header *) &z_2, -+ (struct usb_descriptor_header *) &z_audio_if_desc, -+ (struct usb_descriptor_header *) &z_audio_if_desc2, -+ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, -+ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, -+ (struct usb_descriptor_header *) &z_iso_ep, -+ (struct usb_descriptor_header *) &z_iso_ep2, -+ (struct usb_descriptor_header *) &za_0, -+ (struct usb_descriptor_header *) &za_1, -+ (struct usb_descriptor_header *) &za_2, -+ (struct usb_descriptor_header *) &za_3, -+ (struct usb_descriptor_header *) &za_4, -+ (struct usb_descriptor_header *) &za_5, -+ (struct usb_descriptor_header *) &za_6, -+ (struct usb_descriptor_header *) &za_7, -+ (struct usb_descriptor_header *) &za_8, -+ (struct usb_descriptor_header *) &za_9, -+ (struct usb_descriptor_header *) &za_10, -+ (struct usb_descriptor_header *) &za_11, -+ (struct usb_descriptor_header *) &za_12, -+ (struct usb_descriptor_header *) &za_13, -+ (struct usb_descriptor_header *) &za_14, -+ (struct usb_descriptor_header *) &za_15, -+ (struct usb_descriptor_header *) &za_16, -+ (struct usb_descriptor_header *) &za_17, -+ (struct usb_descriptor_header *) &za_18, -+ (struct usb_descriptor_header *) &za_19, -+ (struct usb_descriptor_header *) &za_20, -+ (struct usb_descriptor_header *) &za_21, -+ (struct usb_descriptor_header *) &za_22, -+ (struct usb_descriptor_header *) &za_23, -+ (struct usb_descriptor_header *) &za_24, -+ NULL, -+}; -+ -+/* maxpacket and other transfer characteristics vary by speed. */ -+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) -+ -+#else -+ -+/* if there's no high speed support, maxpacket doesn't change. */ -+#define ep_desc(g,hs,fs) fs -+ -+#endif /* !CONFIG_USB_GADGET_DUALSPEED */ -+ -+static char manufacturer [40]; -+//static char serial [40]; -+static char serial [] = "Ser 00 em"; -+ -+/* static strings, in UTF-8 */ -+static struct usb_string strings [] = { -+ { STRING_MANUFACTURER, manufacturer, }, -+ { STRING_PRODUCT, longname, }, -+ { STRING_SERIAL, serial, }, -+ { STRING_LOOPBACK, loopback, }, -+ { STRING_SOURCE_SINK, source_sink, }, -+ { } /* end of list */ -+}; -+ -+static struct usb_gadget_strings stringtab = { -+ .language = 0x0409, /* en-us */ -+ .strings = strings, -+}; -+ -+/* -+ * config descriptors are also handcrafted. these must agree with code -+ * that sets configurations, and with code managing interfaces and their -+ * altsettings. other complexity may come from: -+ * -+ * - high speed support, including "other speed config" rules -+ * - multiple configurations -+ * - interfaces with alternate settings -+ * - embedded class or vendor-specific descriptors -+ * -+ * this handles high speed, and has a second config that could as easily -+ * have been an alternate interface setting (on most hardware). -+ * -+ * NOTE: to demonstrate (and test) more USB capabilities, this driver -+ * should include an altsetting to test interrupt transfers, including -+ * high bandwidth modes at high speed. (Maybe work like Intel's test -+ * device?) -+ */ -+static int -+config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) -+{ -+ int len; -+ const struct usb_descriptor_header **function; -+ -+ function = z_function; -+ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); -+ if (len < 0) -+ return len; -+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; -+ return len; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static struct usb_request * -+alloc_ep_req (struct usb_ep *ep, unsigned length) -+{ -+ struct usb_request *req; -+ -+ req = usb_ep_alloc_request (ep, GFP_ATOMIC); -+ if (req) { -+ req->length = length; -+ req->buf = usb_ep_alloc_buffer (ep, length, -+ &req->dma, GFP_ATOMIC); -+ if (!req->buf) { -+ usb_ep_free_request (ep, req); -+ req = NULL; -+ } -+ } -+ return req; -+} -+ -+static void free_ep_req (struct usb_ep *ep, struct usb_request *req) -+{ -+ if (req->buf) -+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); -+ usb_ep_free_request (ep, req); -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+/* optionally require specific source/sink data patterns */ -+ -+static int -+check_read_data ( -+ struct zero_dev *dev, -+ struct usb_ep *ep, -+ struct usb_request *req -+) -+{ -+ unsigned i; -+ u8 *buf = req->buf; -+ -+ for (i = 0; i < req->actual; i++, buf++) { -+ switch (pattern) { -+ /* all-zeroes has no synchronization issues */ -+ case 0: -+ if (*buf == 0) -+ continue; -+ break; -+ /* mod63 stays in sync with short-terminated transfers, -+ * or otherwise when host and gadget agree on how large -+ * each usb transfer request should be. resync is done -+ * with set_interface or set_config. -+ */ -+ case 1: -+ if (*buf == (u8)(i % 63)) -+ continue; -+ break; -+ } -+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); -+ usb_ep_set_halt (ep); -+ return -EINVAL; -+ } -+ return 0; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void zero_reset_config (struct zero_dev *dev) -+{ -+ if (dev->config == 0) -+ return; -+ -+ DBG (dev, "reset config\n"); -+ -+ /* just disable endpoints, forcing completion of pending i/o. -+ * all our completion handlers free their requests in this case. -+ */ -+ if (dev->in_ep) { -+ usb_ep_disable (dev->in_ep); -+ dev->in_ep = NULL; -+ } -+ if (dev->out_ep) { -+ usb_ep_disable (dev->out_ep); -+ dev->out_ep = NULL; -+ } -+ dev->config = 0; -+ del_timer (&dev->resume); -+} -+ -+#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) -+ -+static void -+zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) -+{ -+ struct zero_dev *dev = ep->driver_data; -+ int status = req->status; -+ int i, j; -+ -+ switch (status) { -+ -+ case 0: /* normal completion? */ -+ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); -+ for (i=0, j=rbuf_start; i<req->actual; i++) { -+ //printk ("%02x ", ((__u8*)req->buf)[i]); -+ rbuf[j] = ((__u8*)req->buf)[i]; -+ j++; -+ if (j >= RBUF_LEN) j=0; -+ } -+ rbuf_start = j; -+ //printk ("\n\n"); -+ -+ if (rbuf_len < RBUF_LEN) { -+ rbuf_len += req->actual; -+ if (rbuf_len > RBUF_LEN) { -+ rbuf_len = RBUF_LEN; -+ } -+ } -+ -+ break; -+ -+ /* this endpoint is normally active while we're configured */ -+ case -ECONNABORTED: /* hardware forced ep reset */ -+ case -ECONNRESET: /* request dequeued */ -+ case -ESHUTDOWN: /* disconnect from host */ -+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, -+ req->actual, req->length); -+ if (ep == dev->out_ep) -+ check_read_data (dev, ep, req); -+ free_ep_req (ep, req); -+ return; -+ -+ case -EOVERFLOW: /* buffer overrun on read means that -+ * we didn't provide a big enough -+ * buffer. -+ */ -+ default: -+#if 1 -+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, -+ status, req->actual, req->length); -+#endif -+ case -EREMOTEIO: /* short read */ -+ break; -+ } -+ -+ status = usb_ep_queue (ep, req, GFP_ATOMIC); -+ if (status) { -+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", -+ ep->name, req->length, status); -+ usb_ep_set_halt (ep); -+ /* FIXME recover later ... somehow */ -+ } -+} -+ -+static struct usb_request * -+zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) -+{ -+ struct usb_request *req; -+ int status; -+ -+ req = alloc_ep_req (ep, 512); -+ if (!req) -+ return NULL; -+ -+ req->complete = zero_isoc_complete; -+ -+ status = usb_ep_queue (ep, req, gfp_flags); -+ if (status) { -+ struct zero_dev *dev = ep->driver_data; -+ -+ ERROR (dev, "start %s --> %d\n", ep->name, status); -+ free_ep_req (ep, req); -+ req = NULL; -+ } -+ -+ return req; -+} -+ -+/* change our operational config. this code must agree with the code -+ * that returns config descriptors, and altsetting code. -+ * -+ * it's also responsible for power management interactions. some -+ * configurations might not work with our current power sources. -+ * -+ * note that some device controller hardware will constrain what this -+ * code can do, perhaps by disallowing more than one configuration or -+ * by limiting configuration choices (like the pxa2xx). -+ */ -+static int -+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) -+{ -+ int result = 0; -+ struct usb_gadget *gadget = dev->gadget; -+ const struct usb_endpoint_descriptor *d; -+ struct usb_ep *ep; -+ -+ if (number == dev->config) -+ return 0; -+ -+ zero_reset_config (dev); -+ -+ gadget_for_each_ep (ep, gadget) { -+ -+ if (strcmp (ep->name, "ep4") == 0) { -+ -+ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 -+ result = usb_ep_enable (ep, d); -+ -+ if (result == 0) { -+ ep->driver_data = dev; -+ dev->in_ep = ep; -+ -+ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { -+ -+ dev->in_ep = ep; -+ continue; -+ } -+ -+ usb_ep_disable (ep); -+ result = -EIO; -+ } -+ } -+ -+ } -+ -+ dev->config = number; -+ return result; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) -+{ -+ if (req->status || req->actual != req->length) -+ DBG ((struct zero_dev *) ep->driver_data, -+ "setup complete --> %d, %d/%d\n", -+ req->status, req->actual, req->length); -+} -+ -+/* -+ * The setup() callback implements all the ep0 functionality that's -+ * not handled lower down, in hardware or the hardware driver (like -+ * device and endpoint feature flags, and their status). It's all -+ * housekeeping for the gadget function we're implementing. Most of -+ * the work is in config-specific setup. -+ */ -+static int -+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ struct usb_request *req = dev->req; -+ int value = -EOPNOTSUPP; -+ -+ /* usually this stores reply data in the pre-allocated ep0 buffer, -+ * but config change events will reconfigure hardware. -+ */ -+ req->zero = 0; -+ switch (ctrl->bRequest) { -+ -+ case USB_REQ_GET_DESCRIPTOR: -+ -+ switch (ctrl->wValue >> 8) { -+ -+ case USB_DT_DEVICE: -+ value = min (ctrl->wLength, (u16) sizeof device_desc); -+ memcpy (req->buf, &device_desc, value); -+ break; -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ case USB_DT_DEVICE_QUALIFIER: -+ if (!gadget->is_dualspeed) -+ break; -+ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); -+ memcpy (req->buf, &dev_qualifier, value); -+ break; -+ -+ case USB_DT_OTHER_SPEED_CONFIG: -+ if (!gadget->is_dualspeed) -+ break; -+ // FALLTHROUGH -+#endif /* CONFIG_USB_GADGET_DUALSPEED */ -+ case USB_DT_CONFIG: -+ value = config_buf (gadget, req->buf, -+ ctrl->wValue >> 8, -+ ctrl->wValue & 0xff); -+ if (value >= 0) -+ value = min (ctrl->wLength, (u16) value); -+ break; -+ -+ case USB_DT_STRING: -+ /* wIndex == language code. -+ * this driver only handles one language, you can -+ * add string tables for other languages, using -+ * any UTF-8 characters -+ */ -+ value = usb_gadget_get_string (&stringtab, -+ ctrl->wValue & 0xff, req->buf); -+ if (value >= 0) { -+ value = min (ctrl->wLength, (u16) value); -+ } -+ break; -+ } -+ break; -+ -+ /* currently two configs, two speeds */ -+ case USB_REQ_SET_CONFIGURATION: -+ if (ctrl->bRequestType != 0) -+ goto unknown; -+ -+ spin_lock (&dev->lock); -+ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); -+ spin_unlock (&dev->lock); -+ break; -+ case USB_REQ_GET_CONFIGURATION: -+ if (ctrl->bRequestType != USB_DIR_IN) -+ goto unknown; -+ *(u8 *)req->buf = dev->config; -+ value = min (ctrl->wLength, (u16) 1); -+ break; -+ -+ /* until we add altsetting support, or other interfaces, -+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) -+ * and already killed pending endpoint I/O. -+ */ -+ case USB_REQ_SET_INTERFACE: -+ -+ if (ctrl->bRequestType != USB_RECIP_INTERFACE) -+ goto unknown; -+ spin_lock (&dev->lock); -+ if (dev->config) { -+ u8 config = dev->config; -+ -+ /* resets interface configuration, forgets about -+ * previous transaction state (queued bufs, etc) -+ * and re-inits endpoint state (toggle etc) -+ * no response queued, just zero status == success. -+ * if we had more than one interface we couldn't -+ * use this "reset the config" shortcut. -+ */ -+ zero_reset_config (dev); -+ zero_set_config (dev, config, GFP_ATOMIC); -+ value = 0; -+ } -+ spin_unlock (&dev->lock); -+ break; -+ case USB_REQ_GET_INTERFACE: -+ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { -+ value = ctrl->wLength; -+ break; -+ } -+ else { -+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) -+ goto unknown; -+ if (!dev->config) -+ break; -+ if (ctrl->wIndex != 0) { -+ value = -EDOM; -+ break; -+ } -+ *(u8 *)req->buf = 0; -+ value = min (ctrl->wLength, (u16) 1); -+ } -+ break; -+ -+ /* -+ * These are the same vendor-specific requests supported by -+ * Intel's USB 2.0 compliance test devices. We exceed that -+ * device spec by allowing multiple-packet requests. -+ */ -+ case 0x5b: /* control WRITE test -- fill the buffer */ -+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) -+ goto unknown; -+ if (ctrl->wValue || ctrl->wIndex) -+ break; -+ /* just read that many bytes into the buffer */ -+ if (ctrl->wLength > USB_BUFSIZ) -+ break; -+ value = ctrl->wLength; -+ break; -+ case 0x5c: /* control READ test -- return the buffer */ -+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) -+ goto unknown; -+ if (ctrl->wValue || ctrl->wIndex) -+ break; -+ /* expect those bytes are still in the buffer; send back */ -+ if (ctrl->wLength > USB_BUFSIZ -+ || ctrl->wLength != req->length) -+ break; -+ value = ctrl->wLength; -+ break; -+ -+ case 0x01: // SET_CUR -+ case 0x02: -+ case 0x03: -+ case 0x04: -+ case 0x05: -+ value = ctrl->wLength; -+ break; -+ case 0x81: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0xe3; -+ break; -+ case 0x0300: -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x00; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x81; -+ //((u8*)req->buf)[1] = 0x81; -+ value = ctrl->wLength; -+ break; -+ case 0x82: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0xc3; -+ break; -+ case 0x0300: -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x00; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x82; -+ //((u8*)req->buf)[1] = 0x82; -+ value = ctrl->wLength; -+ break; -+ case 0x83: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0x00; -+ break; -+ case 0x0300: -+ ((u8*)req->buf)[0] = 0x60; -+ break; -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x18; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x83; -+ //((u8*)req->buf)[1] = 0x83; -+ value = ctrl->wLength; -+ break; -+ case 0x84: -+ switch (ctrl->wValue) { -+ case 0x0201: -+ case 0x0202: -+ ((u8*)req->buf)[0] = 0x00; -+ ((u8*)req->buf)[1] = 0x01; -+ break; -+ case 0x0300: -+ case 0x0500: -+ ((u8*)req->buf)[0] = 0x08; -+ break; -+ } -+ //((u8*)req->buf)[0] = 0x84; -+ //((u8*)req->buf)[1] = 0x84; -+ value = ctrl->wLength; -+ break; -+ case 0x85: -+ ((u8*)req->buf)[0] = 0x85; -+ ((u8*)req->buf)[1] = 0x85; -+ value = ctrl->wLength; -+ break; -+ -+ -+ default: -+unknown: -+ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", -+ ctrl->bRequestType, ctrl->bRequest, -+ ctrl->wValue, ctrl->wIndex, ctrl->wLength); -+ } -+ -+ /* respond with data transfer before status phase? */ -+ if (value >= 0) { -+ req->length = value; -+ req->zero = value < ctrl->wLength -+ && (value % gadget->ep0->maxpacket) == 0; -+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); -+ if (value < 0) { -+ DBG (dev, "ep_queue < 0 --> %d\n", value); -+ req->status = 0; -+ zero_setup_complete (gadget->ep0, req); -+ } -+ } -+ -+ /* device either stalls (value < 0) or reports success */ -+ return value; -+} -+ -+static void -+zero_disconnect (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ unsigned long flags; -+ -+ spin_lock_irqsave (&dev->lock, flags); -+ zero_reset_config (dev); -+ -+ /* a more significant application might have some non-usb -+ * activities to quiesce here, saving resources like power -+ * or pushing the notification up a network stack. -+ */ -+ spin_unlock_irqrestore (&dev->lock, flags); -+ -+ /* next we may get setup() calls to enumerate new connections; -+ * or an unbind() during shutdown (including removing module). -+ */ -+} -+ -+static void -+zero_autoresume (unsigned long _dev) -+{ -+ struct zero_dev *dev = (struct zero_dev *) _dev; -+ int status; -+ -+ /* normally the host would be woken up for something -+ * more significant than just a timer firing... -+ */ -+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { -+ status = usb_gadget_wakeup (dev->gadget); -+ DBG (dev, "wakeup --> %d\n", status); -+ } -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void -+zero_unbind (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ -+ DBG (dev, "unbind\n"); -+ -+ /* we've already been disconnected ... no i/o is active */ -+ if (dev->req) -+ free_ep_req (gadget->ep0, dev->req); -+ del_timer_sync (&dev->resume); -+ kfree (dev); -+ set_gadget_data (gadget, NULL); -+} -+ -+static int -+zero_bind (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev; -+ //struct usb_ep *ep; -+ -+ printk("binding\n"); -+ /* -+ * DRIVER POLICY CHOICE: you may want to do this differently. -+ * One thing to avoid is reusing a bcdDevice revision code -+ * with different host-visible configurations or behavior -+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc -+ */ -+ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); -+ -+ -+ /* ok, we made sense of the hardware ... */ -+ dev = kzalloc (sizeof *dev, SLAB_KERNEL); -+ if (!dev) -+ return -ENOMEM; -+ spin_lock_init (&dev->lock); -+ dev->gadget = gadget; -+ set_gadget_data (gadget, dev); -+ -+ /* preallocate control response and buffer */ -+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); -+ if (!dev->req) -+ goto enomem; -+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, -+ &dev->req->dma, GFP_KERNEL); -+ if (!dev->req->buf) -+ goto enomem; -+ -+ dev->req->complete = zero_setup_complete; -+ -+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; -+ -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ /* assume ep0 uses the same value for both speeds ... */ -+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; -+ -+ /* and that all endpoints are dual-speed */ -+ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; -+ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; -+#endif -+ -+ usb_gadget_set_selfpowered (gadget); -+ -+ init_timer (&dev->resume); -+ dev->resume.function = zero_autoresume; -+ dev->resume.data = (unsigned long) dev; -+ -+ gadget->ep0->driver_data = dev; -+ -+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); -+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, -+ EP_OUT_NAME, EP_IN_NAME); -+ -+ snprintf (manufacturer, sizeof manufacturer, -+ UTS_SYSNAME " " UTS_RELEASE " with %s", -+ gadget->name); -+ -+ return 0; -+ -+enomem: -+ zero_unbind (gadget); -+ return -ENOMEM; -+} -+ -+/*-------------------------------------------------------------------------*/ -+ -+static void -+zero_suspend (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ -+ if (gadget->speed == USB_SPEED_UNKNOWN) -+ return; -+ -+ if (autoresume) { -+ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); -+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); -+ } else -+ DBG (dev, "suspend\n"); -+} -+ -+static void -+zero_resume (struct usb_gadget *gadget) -+{ -+ struct zero_dev *dev = get_gadget_data (gadget); -+ -+ DBG (dev, "resume\n"); -+ del_timer (&dev->resume); -+} -+ -+ -+/*-------------------------------------------------------------------------*/ -+ -+static struct usb_gadget_driver zero_driver = { -+#ifdef CONFIG_USB_GADGET_DUALSPEED -+ .speed = USB_SPEED_HIGH, -+#else -+ .speed = USB_SPEED_FULL, -+#endif -+ .function = (char *) longname, -+ .bind = zero_bind, -+ .unbind = zero_unbind, -+ -+ .setup = zero_setup, -+ .disconnect = zero_disconnect, -+ -+ .suspend = zero_suspend, -+ .resume = zero_resume, -+ -+ .driver = { -+ .name = (char *) shortname, -+ // .shutdown = ... -+ // .suspend = ... -+ // .resume = ... -+ }, -+}; -+ -+MODULE_AUTHOR ("David Brownell"); -+MODULE_LICENSE ("Dual BSD/GPL"); -+ -+static struct proc_dir_entry *pdir, *pfile; -+ -+static int isoc_read_data (char *page, char **start, -+ off_t off, int count, -+ int *eof, void *data) -+{ -+ int i; -+ static int c = 0; -+ static int done = 0; -+ static int s = 0; -+ -+/* -+ printk ("\ncount: %d\n", count); -+ printk ("rbuf_start: %d\n", rbuf_start); -+ printk ("rbuf_len: %d\n", rbuf_len); -+ printk ("off: %d\n", off); -+ printk ("start: %p\n\n", *start); -+*/ -+ if (done) { -+ c = 0; -+ done = 0; -+ *eof = 1; -+ return 0; -+ } -+ -+ if (c == 0) { -+ if (rbuf_len == RBUF_LEN) -+ s = rbuf_start; -+ else s = 0; -+ } -+ -+ for (i=0; i<count && c<rbuf_len; i++, c++) { -+ page[i] = rbuf[(c+s) % RBUF_LEN]; -+ } -+ *start = page; -+ -+ if (c >= rbuf_len) { -+ *eof = 1; -+ done = 1; -+ } -+ -+ -+ return i; -+} -+ -+static int __init init (void) -+{ -+ -+ int retval = 0; -+ -+ pdir = proc_mkdir("isoc_test", NULL); -+ if(pdir == NULL) { -+ retval = -ENOMEM; -+ printk("Error creating dir\n"); -+ goto done; -+ } -+ pdir->owner = THIS_MODULE; -+ -+ pfile = create_proc_read_entry("isoc_data", -+ 0444, pdir, -+ isoc_read_data, -+ NULL); -+ if (pfile == NULL) { -+ retval = -ENOMEM; -+ printk("Error creating file\n"); -+ goto no_file; -+ } -+ pfile->owner = THIS_MODULE; -+ -+ return usb_gadget_register_driver (&zero_driver); -+ -+ no_file: -+ remove_proc_entry("isoc_data", NULL); -+ done: -+ return retval; -+} -+module_init (init); -+ -+static void __exit cleanup (void) -+{ -+ -+ usb_gadget_unregister_driver (&zero_driver); -+ -+ remove_proc_entry("isoc_data", pdir); -+ remove_proc_entry("isoc_test", NULL); -+} -+module_exit (cleanup); ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h -@@ -0,0 +1,142 @@ -+/* ========================================================================== -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_CFI_COMMON_H__) -+#define __DWC_CFI_COMMON_H__ -+ -+//#include <linux/types.h> -+ -+/** -+ * @file -+ * -+ * This file contains the CFI specific common constants, interfaces -+ * (functions and macros) and structures for Linux. No PCD specific -+ * data structure or definition is to be included in this file. -+ * -+ */ -+ -+/** This is a request for all Core Features */ -+#define VEN_CORE_GET_FEATURES 0xB1 -+ -+/** This is a request to get the value of a specific Core Feature */ -+#define VEN_CORE_GET_FEATURE 0xB2 -+ -+/** This command allows the host to set the value of a specific Core Feature */ -+#define VEN_CORE_SET_FEATURE 0xB3 -+ -+/** This command allows the host to set the default values of -+ * either all or any specific Core Feature -+ */ -+#define VEN_CORE_RESET_FEATURES 0xB4 -+ -+/** This command forces the PCD to write the deferred values of a Core Features */ -+#define VEN_CORE_ACTIVATE_FEATURES 0xB5 -+ -+/** This request reads a DWORD value from a register at the specified offset */ -+#define VEN_CORE_READ_REGISTER 0xB6 -+ -+/** This request writes a DWORD value into a register at the specified offset */ -+#define VEN_CORE_WRITE_REGISTER 0xB7 -+ -+/** This structure is the header of the Core Features dataset returned to -+ * the Host -+ */ -+struct cfi_all_features_header { -+/** The features header structure length is */ -+#define CFI_ALL_FEATURES_HDR_LEN 8 -+ /** -+ * The total length of the features dataset returned to the Host -+ */ -+ uint16_t wTotalLen; -+ -+ /** -+ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H). -+ * This field identifies the version of the CFI Specification with which -+ * the device is compliant. -+ */ -+ uint16_t wVersion; -+ -+ /** The ID of the Core */ -+ uint16_t wCoreID; -+#define CFI_CORE_ID_UDC 1 -+#define CFI_CORE_ID_OTG 2 -+#define CFI_CORE_ID_WUDEV 3 -+ -+ /** Number of features returned by VEN_CORE_GET_FEATURES request */ -+ uint16_t wNumFeatures; -+} UPACKED; -+ -+typedef struct cfi_all_features_header cfi_all_features_header_t; -+ -+/** This structure is a header of the Core Feature descriptor dataset returned to -+ * the Host after the VEN_CORE_GET_FEATURES request -+ */ -+struct cfi_feature_desc_header { -+#define CFI_FEATURE_DESC_HDR_LEN 8 -+ -+ /** The feature ID */ -+ uint16_t wFeatureID; -+ -+ /** Length of this feature descriptor in bytes - including the -+ * length of the feature name string -+ */ -+ uint16_t wLength; -+ -+ /** The data length of this feature in bytes */ -+ uint16_t wDataLength; -+ -+ /** -+ * Attributes of this features -+ * D0: Access rights -+ * 0 - Read/Write -+ * 1 - Read only -+ */ -+ uint8_t bmAttributes; -+#define CFI_FEATURE_ATTR_RO 1 -+#define CFI_FEATURE_ATTR_RW 0 -+ -+ /** Length of the feature name in bytes */ -+ uint8_t bNameLen; -+ -+ /** The feature name buffer */ -+ //uint8_t *name; -+} UPACKED; -+ -+typedef struct cfi_feature_desc_header cfi_feature_desc_header_t; -+ -+/** -+ * This structure describes a NULL terminated string referenced by its id field. -+ * It is very similar to usb_string structure but has the id field type set to 16-bit. -+ */ -+struct cfi_string { -+ uint16_t id; -+ const uint8_t *s; -+}; -+typedef struct cfi_string cfi_string_t; -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c -@@ -0,0 +1,854 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $ -+ * $Revision: #12 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#include "dwc_os.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_adp.h" -+ -+/** @file -+ * -+ * This file contains the most of the Attach Detect Protocol implementation for -+ * the driver to support OTG Rev2.0. -+ * -+ */ -+ -+void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value) -+{ -+ adpctl_data_t adpctl; -+ -+ adpctl.d32 = value; -+ adpctl.b.ar = 0x2; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); -+ -+ while (adpctl.b.ar) { -+ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); -+ } -+ -+} -+ -+/** -+ * Function is called to read ADP registers -+ */ -+uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ adpctl.d32 = 0; -+ adpctl.b.ar = 0x1; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32); -+ -+ while (adpctl.b.ar) { -+ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl); -+ } -+ -+ return adpctl.d32; -+} -+ -+/** -+ * Function is called to read ADPCTL register and filter Write-clear bits -+ */ -+uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_tmout_int = 0; -+ adpctl.b.adp_prb_int = 0; -+ adpctl.b.adp_tmout_int = 0; -+ -+ return adpctl.d32; -+} -+ -+/** -+ * Function is called to write ADP registers -+ */ -+void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr, -+ uint32_t set) -+{ -+ dwc_otg_adp_write_reg(core_if, -+ (dwc_otg_adp_read_reg(core_if) & (~clr)) | set); -+} -+ -+static void adp_sense_timeout(void *ptr) -+{ -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ core_if->adp.sense_timer_started = 0; -+ DWC_PRINTF("ADP SENSE TIMEOUT\n"); -+ if (core_if->adp_enable) { -+ dwc_otg_adp_sense_stop(core_if); -+ dwc_otg_adp_probe_start(core_if); -+ } -+} -+ -+/** -+ * This function is called when the ADP vbus timer expires. Timeout is 1.1s. -+ */ -+static void adp_vbuson_timeout(void *ptr) -+{ -+ gpwrdn_data_t gpwrdn; -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__); -+ if (core_if) { -+ core_if->adp.vbuson_timer_started = 0; -+ /* Turn off vbus */ -+ hprt0.b.prtpwr = 1; -+ DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0); -+ gpwrdn.d32 = 0; -+ -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ /* Enable Wakeup Logic */ -+// gpwrdn.b.wkupactiv = 1; -+ gpwrdn.b.pmuactv = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ -+ /* Suspend the Phy Clock */ -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ /* Switch on VDD */ -+// gpwrdn.b.wkupactiv = 1; -+ gpwrdn.b.pmuactv = 1; -+ gpwrdn.b.pwrdnrstn = 1; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ } else { -+ /* Enable Power Down Logic */ -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ } -+ -+ /* Unmask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ -+ dwc_otg_adp_probe_start(core_if); -+ dwc_otg_dump_global_registers(core_if); -+ dwc_otg_dump_host_registers(core_if); -+ } -+ -+} -+ -+/** -+ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is -+ * not asserted within 1.1 seconds. -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if) -+{ -+ core_if->adp.vbuson_timer_started = 1; -+ if (core_if->adp.vbuson_timer) -+ { -+ DWC_PRINTF("SCHEDULING VBUSON TIMER\n"); -+ /* 1.1 secs + 60ms necessary for cil_hcd_start*/ -+ DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160); -+ } else { -+ DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer); -+ } -+} -+ -+#if 0 -+/** -+ * Masks all DWC OTG core interrupts -+ * -+ */ -+static void mask_all_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ -+ /* Mask Host Interrupts */ -+ -+ /* Clear and disable HCINTs */ -+ for (i = 0; i < core_if->core_params->host_channels; i++) { -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0); -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF); -+ -+ } -+ -+ /* Clear and disable HAINT */ -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000); -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF); -+ -+ /* Mask Device Interrupts */ -+ if (!core_if->multiproc_int_enable) { -+ /* Clear and disable IN Endpoint interrupts */ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0); -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> -+ diepint, 0xFFFFFFFF); -+ } -+ -+ /* Clear and disable OUT Endpoint interrupts */ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0); -+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> -+ doepint, 0xFFFFFFFF); -+ } -+ -+ /* Clear and disable DAINT */ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint, -+ 0xFFFFFFFF); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0); -+ } else { -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ diepeachintmsk[i], 0); -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]-> -+ diepint, 0xFFFFFFFF); -+ } -+ -+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[i], 0); -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]-> -+ doepint, 0xFFFFFFFF); -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, -+ 0); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint, -+ 0xFFFFFFFF); -+ -+ } -+ -+ /* Disable interrupts */ -+ ahbcfg.b.glblintrmsk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); -+ -+ /* Disable all interrupts. */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); -+ -+ /* Clear any pending interrupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Clear any pending OTG Interrupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF); -+} -+ -+/** -+ * Unmask Port Connection Detected interrupt -+ * -+ */ -+static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 }; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); -+} -+#endif -+ -+/** -+ * Starts the ADP Probing -+ * -+ * @param core_if the pointer to core_if structure. -+ */ -+uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if) -+{ -+ -+ adpctl_data_t adpctl = {.d32 = 0}; -+ gpwrdn_data_t gpwrdn; -+#if 0 -+ adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1, -+ .b.adp_sns_int = 1, b.adp_tmout_int}; -+#endif -+ dwc_otg_disable_global_interrupts(core_if); -+ DWC_PRINTF("ADP Probe Start\n"); -+ core_if->adp.probe_enabled = 1; -+ -+ adpctl.b.adpres = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ while (adpctl.b.adpres) { -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ } -+ -+ adpctl.d32 = 0; -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ /* In Host mode unmask SRP detected interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.sts_chngint_msk = 1; -+ if (!gpwrdn.b.idsts) { -+ gpwrdn.b.srp_det_msk = 1; -+ } -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ -+ adpctl.b.adp_tmout_int_msk = 1; -+ adpctl.b.adp_prb_int_msk = 1; -+ adpctl.b.prb_dschg = 1; -+ adpctl.b.prb_delta = 1; -+ adpctl.b.prb_per = 1; -+ adpctl.b.adpen = 1; -+ adpctl.b.enaprb = 1; -+ -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ DWC_PRINTF("ADP Probe Finish\n"); -+ return 0; -+} -+ -+/** -+ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted -+ * within 3 seconds. -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if) -+{ -+ core_if->adp.sense_timer_started = 1; -+ DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ ); -+} -+ -+/** -+ * Starts the ADP Sense -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ DWC_PRINTF("ADP Sense Start\n"); -+ -+ /* Unmask ADP sense interrupt and mask all other from the core */ -+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); -+ adpctl.b.adp_sns_int_msk = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ dwc_otg_disable_global_interrupts(core_if); // vahrama -+ -+ /* Set ADP reset bit*/ -+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); -+ adpctl.b.adpres = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ while (adpctl.b.adpres) { -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ } -+ -+ adpctl.b.adpres = 0; -+ adpctl.b.adpen = 1; -+ adpctl.b.enasns = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ dwc_otg_adp_sense_timer_start(core_if); -+ -+ return 0; -+} -+ -+/** -+ * Stops the ADP Probing -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if) -+{ -+ -+ adpctl_data_t adpctl; -+ DWC_PRINTF("Stop ADP probe\n"); -+ core_if->adp.probe_enabled = 0; -+ core_if->adp.probe_counter = 0; -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ -+ adpctl.b.adpen = 0; -+ adpctl.b.adp_prb_int = 1; -+ adpctl.b.adp_tmout_int = 1; -+ adpctl.b.adp_sns_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * Stops the ADP Sensing -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ -+ core_if->adp.sense_enabled = 0; -+ -+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if); -+ adpctl.b.enasns = 0; -+ adpctl.b.adp_sns_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * Called to turn on the VBUS after initial ADP probe in host mode. -+ * If port power was already enabled in cil_hcd_start function then -+ * only schedule a timer. -+ * -+ * @param core_if the pointer to core_if structure. -+ */ -+void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr); -+ -+ if (hprt0.b.prtpwr == 0) { -+ hprt0.b.prtpwr = 1; -+ //DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ -+ dwc_otg_adp_vbuson_timer_start(core_if); -+} -+ -+/** -+ * Called right after driver is loaded -+ * to perform initial actions for ADP -+ * -+ * @param core_if the pointer to core_if structure. -+ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN -+ */ -+void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host) -+{ -+ gpwrdn_data_t gpwrdn; -+ -+ DWC_PRINTF("ADP Initial Start\n"); -+ core_if->adp.adp_started = 1; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ dwc_otg_disable_global_interrupts(core_if); -+ if (is_host) { -+ DWC_PRINTF("HOST MODE\n"); -+ /* Enable Power Down Logic Interrupt*/ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ /* Initialize first ADP probe to obtain Ramp Time value */ -+ core_if->adp.initial_probe = 1; -+ dwc_otg_adp_probe_start(core_if); -+ } else { -+ gotgctl_data_t gotgctl; -+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ DWC_PRINTF("DEVICE MODE\n"); -+ if (gotgctl.b.bsesvld == 0) { -+ /* Enable Power Down Logic Interrupt*/ -+ gpwrdn.d32 = 0; -+ DWC_PRINTF("VBUS is not valid - start ADP probe\n"); -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ core_if->adp.initial_probe = 1; -+ dwc_otg_adp_probe_start(core_if); -+ } else { -+ DWC_PRINTF("VBUS is valid - initialize core as a Device\n"); -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ dwc_otg_dump_global_registers(core_if); -+ dwc_otg_dump_dev_registers(core_if); -+ } -+ } -+} -+ -+void dwc_otg_adp_init(dwc_otg_core_if_t * core_if) -+{ -+ core_if->adp.adp_started = 0; -+ core_if->adp.initial_probe = 0; -+ core_if->adp.probe_timer_values[0] = -1; -+ core_if->adp.probe_timer_values[1] = -1; -+ core_if->adp.probe_enabled = 0; -+ core_if->adp.sense_enabled = 0; -+ core_if->adp.sense_timer_started = 0; -+ core_if->adp.vbuson_timer_started = 0; -+ core_if->adp.probe_counter = 0; -+ core_if->adp.gpwrdn = 0; -+ core_if->adp.attached = DWC_OTG_ADP_UNKOWN; -+ /* Initialize timers */ -+ core_if->adp.sense_timer = -+ DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if); -+ core_if->adp.vbuson_timer = -+ DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if); -+ if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer) -+ { -+ DWC_ERROR("Could not allocate memory for ADP timers\n"); -+ } -+} -+ -+void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = { .d32 = 0 }; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ if (core_if->adp.probe_enabled) -+ dwc_otg_adp_probe_stop(core_if); -+ if (core_if->adp.sense_enabled) -+ dwc_otg_adp_sense_stop(core_if); -+ if (core_if->adp.sense_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.sense_timer); -+ if (core_if->adp.vbuson_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); -+ DWC_TIMER_FREE(core_if->adp.sense_timer); -+ DWC_TIMER_FREE(core_if->adp.vbuson_timer); -+} -+ -+///////////////////////////////////////////////////////////////////// -+////////////// ADP Interrupt Handlers /////////////////////////////// -+///////////////////////////////////////////////////////////////////// -+/** -+ * This function sets Ramp Timer values -+ */ -+static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ if (core_if->adp.probe_timer_values[0] == -1) { -+ core_if->adp.probe_timer_values[0] = val; -+ core_if->adp.probe_timer_values[1] = -1; -+ return 1; -+ } else { -+ core_if->adp.probe_timer_values[1] = -+ core_if->adp.probe_timer_values[0]; -+ core_if->adp.probe_timer_values[0] = val; -+ return 0; -+ } -+} -+ -+/** -+ * This function compares Ramp Timer values -+ */ -+static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t diff; -+ if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1]) -+ diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1]; -+ else -+ diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0]; -+ if(diff < 2) { -+ return 0; -+ } else { -+ return 1; -+ } -+} -+ -+/** -+ * This function handles ADP Probe Interrupts -+ */ -+static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if, -+ uint32_t val) -+{ -+ adpctl_data_t adpctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn, temp; -+ adpctl.d32 = val; -+ -+ temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ core_if->adp.probe_counter++; -+ core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (adpctl.b.rtim == 0 && !temp.b.idsts){ -+ DWC_PRINTF("RTIM value is 0\n"); -+ goto exit; -+ } -+ if (set_timer_value(core_if, adpctl.b.rtim) && -+ core_if->adp.initial_probe) { -+ core_if->adp.initial_probe = 0; -+ dwc_otg_adp_probe_stop(core_if); -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* check which value is for device mode and which for Host mode */ -+ if (!temp.b.idsts) { /* considered host mode value is 0 */ -+ /* -+ * Turn on VBUS after initial ADP probe. -+ */ -+ core_if->op_state = A_HOST; -+ dwc_otg_enable_global_interrupts(core_if); -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_start(core_if); -+ dwc_otg_adp_turnon_vbus(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ } else { -+ /* -+ * Initiate SRP after initial ADP probe. -+ */ -+ dwc_otg_enable_global_interrupts(core_if); -+ dwc_otg_initiate_srp(core_if); -+ } -+ } else if (core_if->adp.probe_counter > 2){ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (compare_timer_values(core_if)) { -+ DWC_PRINTF("Difference in timer values !!! \n"); -+// core_if->adp.attached = DWC_OTG_ADP_ATTACHED; -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Power on the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ /* check which value is for device mode and which for Host mode */ -+ if (!temp.b.idsts) { /* considered host mode value is 0 */ -+ /* Disable Interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Host mode. -+ */ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } else { -+ gotgctl_data_t gotgctl; -+ /* Mask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ -+ /* Disable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Device mode. -+ */ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ -+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ if (!gotgctl.b.bsesvld) { -+ dwc_otg_initiate_srp(core_if); -+ } -+ } -+ } -+ if (core_if->power_down == 2) { -+ if (gpwrdn.b.bsessvld) { -+ /* Mask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Disable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Device mode. -+ */ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } -+ } -+ } -+exit: -+ /* Clear interrupt */ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_prb_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * This function hadles ADP Sense Interrupt -+ */ -+static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if) -+{ -+ adpctl_data_t adpctl; -+ /* Stop ADP Sense timer */ -+ DWC_TIMER_CANCEL(core_if->adp.sense_timer); -+ -+ /* Restart ADP Sense timer */ -+ dwc_otg_adp_sense_timer_start(core_if); -+ -+ /* Clear interrupt */ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_sns_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * This function handles ADP Probe Interrupts -+ */ -+static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if, -+ uint32_t val) -+{ -+ adpctl_data_t adpctl = {.d32 = 0 }; -+ adpctl.d32 = val; -+ set_timer_value(core_if, adpctl.b.rtim); -+ -+ /* Clear interrupt */ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ adpctl.b.adp_tmout_int = 1; -+ dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ -+ return 0; -+} -+ -+/** -+ * ADP Interrupt handler. -+ * -+ */ -+int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if) -+{ -+ int retval = 0; -+ adpctl_data_t adpctl = {.d32 = 0}; -+ -+ adpctl.d32 = dwc_otg_adp_read_reg(core_if); -+ DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32); -+ -+ if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) { -+ DWC_PRINTF("ADP Sense interrupt\n"); -+ retval |= dwc_otg_adp_handle_sns_intr(core_if); -+ } -+ if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) { -+ DWC_PRINTF("ADP timeout interrupt\n"); -+ retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32); -+ } -+ if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) { -+ DWC_PRINTF("ADP Probe interrupt\n"); -+ adpctl.b.adp_prb_int = 1; -+ retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32); -+ } -+ -+// dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0); -+ //dwc_otg_adp_write_reg(core_if, adpctl.d32); -+ DWC_PRINTF("RETURN FROM ADP ISR\n"); -+ -+ return retval; -+} -+ -+/** -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if) -+{ -+ -+#ifndef DWC_HOST_ONLY -+ hprt0_data_t hprt0; -+ gpwrdn_data_t gpwrdn; -+ DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n"); -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ /* check which value is for device mode and which for Host mode */ -+ if (!gpwrdn.b.idsts) { /* considered host mode value is 0 */ -+ DWC_PRINTF("SRP: Host mode\n"); -+ -+ if (core_if->adp_enable) { -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Power on the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+ -+ /* Turn on the port power bit. */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Start the Connection timer. So a message can be displayed -+ * if connect does not occur within 10 seconds. */ -+ cil_hcd_session_start(core_if); -+ } else { -+ DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__); -+ if (core_if->adp_enable) { -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Power on the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 0; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } -+ } -+#endif -+ return 1; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h -@@ -0,0 +1,80 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $ -+ * $Revision: #7 $ -+ * $Date: 2011/10/24 $ -+ * $Change: 1871159 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_ADP_H__ -+#define __DWC_OTG_ADP_H__ -+ -+/** -+ * @file -+ * -+ * This file contains the Attach Detect Protocol interfaces and defines -+ * (functions) and structures for Linux. -+ * -+ */ -+ -+#define DWC_OTG_ADP_UNATTACHED 0 -+#define DWC_OTG_ADP_ATTACHED 1 -+#define DWC_OTG_ADP_UNKOWN 2 -+ -+typedef struct dwc_otg_adp { -+ uint32_t adp_started; -+ uint32_t initial_probe; -+ int32_t probe_timer_values[2]; -+ uint32_t probe_enabled; -+ uint32_t sense_enabled; -+ dwc_timer_t *sense_timer; -+ uint32_t sense_timer_started; -+ dwc_timer_t *vbuson_timer; -+ uint32_t vbuson_timer_started; -+ uint32_t attached; -+ uint32_t probe_counter; -+ uint32_t gpwrdn; -+} dwc_otg_adp_t; -+ -+/** -+ * Attach Detect Protocol functions -+ */ -+ -+extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value); -+extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if); -+extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); -+extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if); -+extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if); -+extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if); -+ -+#endif //__DWC_OTG_ADP_H__ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c -@@ -0,0 +1,1210 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ -+ * $Revision: #44 $ -+ * $Date: 2010/11/29 $ -+ * $Change: 1636033 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * The diagnostic interface will provide access to the controller for -+ * bringing up the hardware and testing. The Linux driver attributes -+ * feature will be used to provide the Linux Diagnostic -+ * Interface. These attributes are accessed through sysfs. -+ */ -+ -+/** @page "Linux Module Attributes" -+ * -+ * The Linux module attributes feature is used to provide the Linux -+ * Diagnostic Interface. These attributes are accessed through sysfs. -+ * The diagnostic interface will provide access to the controller for -+ * bringing up the hardware and testing. -+ -+ The following table shows the attributes. -+ <table> -+ <tr> -+ <td><b> Name</b></td> -+ <td><b> Description</b></td> -+ <td><b> Access</b></td> -+ </tr> -+ -+ <tr> -+ <td> mode </td> -+ <td> Returns the current mode: 0 for device mode, 1 for host mode</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> hnpcapable </td> -+ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. -+ Read returns the current value.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> srpcapable </td> -+ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. -+ Read returns the current value.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> hsic_connect </td> -+ <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register. -+ Read returns the current value.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> inv_sel_hsic </td> -+ <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register. -+ Read returns the current value.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> hnp </td> -+ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> srp </td> -+ <td> Initiates the Session Request Protocol. Read returns the status.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> buspower </td> -+ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> bussuspend </td> -+ <td> Suspends the USB bus.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> busconnected </td> -+ <td> Gets the connection status of the bus</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> gotgctl </td> -+ <td> Gets or sets the Core Control Status Register.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> gusbcfg </td> -+ <td> Gets or sets the Core USB Configuration Register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> grxfsiz </td> -+ <td> Gets or sets the Receive FIFO Size Register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> gnptxfsiz </td> -+ <td> Gets or sets the non-periodic Transmit Size Register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> gpvndctl </td> -+ <td> Gets or sets the PHY Vendor Control Register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> ggpio </td> -+ <td> Gets the value in the lower 16-bits of the General Purpose IO Register -+ or sets the upper 16 bits.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> guid </td> -+ <td> Gets or sets the value of the User ID Register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> gsnpsid </td> -+ <td> Gets the value of the Synopsys ID Regester</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> devspeed </td> -+ <td> Gets or sets the device speed setting in the DCFG register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> enumspeed </td> -+ <td> Gets the device enumeration Speed.</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> hptxfsiz </td> -+ <td> Gets the value of the Host Periodic Transmit FIFO</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> hprt0 </td> -+ <td> Gets or sets the value in the Host Port Control and Status Register</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> regoffset </td> -+ <td> Sets the register offset for the next Register Access</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> regvalue </td> -+ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> remote_wakeup </td> -+ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote -+ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote -+ Wakeup signalling bit in the Device Control Register is set for 1 -+ milli-second.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> rem_wakeup_pwrdn </td> -+ <td> On read, shows the status core - hibernated or not. On write, initiates -+ a remote wakeup of the device from Hibernation. </td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> mode_ch_tim_en </td> -+ <td> This bit is used to enable or disable the host core to wait for 200 PHY -+ clock cycles at the end of Resume to change the opmode signal to the PHY to 00 -+ after Suspend or LPM. </td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> fr_interval </td> -+ <td> On read, shows the value of HFIR Frame Interval. On write, dynamically -+ reload HFIR register during runtime. The application can write a value to this -+ register only after the Port Enable bit of the Host Port Control and Status -+ register (HPRT.PrtEnaPort) has been set </td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> disconnect_us </td> -+ <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us -+ which causes soft disconnect for 100us. Applicable only for device mode of operation.</td> -+ <td> Read/Write</td> -+ </tr> -+ -+ <tr> -+ <td> regdump </td> -+ <td> Dumps the contents of core registers.</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> spramdump </td> -+ <td> Dumps the contents of core registers.</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> hcddump </td> -+ <td> Dumps the current HCD state.</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> hcd_frrem </td> -+ <td> Shows the average value of the Frame Remaining -+ field in the Host Frame Number/Frame Remaining register when an SOF interrupt -+ occurs. This can be used to determine the average interrupt latency. Also -+ shows the average Frame Remaining value for start_transfer and the "a" and -+ "b" sample points. The "a" and "b" sample points may be used during debugging -+ bto determine how long it takes to execute a section of the HCD code.</td> -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> rd_reg_test </td> -+ <td> Displays the time required to read the GNPTXFSIZ register many times -+ (the output shows the number of times the register is read). -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> wr_reg_test </td> -+ <td> Displays the time required to write the GNPTXFSIZ register many times -+ (the output shows the number of times the register is written). -+ <td> Read</td> -+ </tr> -+ -+ <tr> -+ <td> lpm_response </td> -+ <td> Gets or sets lpm_response mode. Applicable only in device mode. -+ <td> Write</td> -+ </tr> -+ -+ <tr> -+ <td> sleep_status </td> -+ <td> Shows sleep status of device. -+ <td> Read</td> -+ </tr> -+ -+ </table> -+ -+ Example usage: -+ To get the current mode: -+ cat /sys/devices/lm0/mode -+ -+ To power down the USB: -+ echo 0 > /sys/devices/lm0/buspower -+ */ -+ -+#include "dwc_otg_os_dep.h" -+#include "dwc_os.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_attr.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_hcd_if.h" -+ -+/* -+ * MACROs for defining sysfs attribute -+ */ -+#ifdef LM_INTERFACE -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t set = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ -+ return count; \ -+} -+ -+#elif defined(PCI_INTERFACE) -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t set = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ -+ return count; \ -+} -+ -+#elif defined(PLATFORM_INTERFACE) -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct platform_device *platform_dev = \ -+ container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t val; \ -+ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ -+ __func__, _dev, platform_dev, otg_dev); \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t set = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\ -+ return count; \ -+} -+#endif -+ -+/* -+ * MACROs for defining sysfs attribute for 32-bit registers -+ */ -+#ifdef LM_INTERFACE -+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \ -+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \ -+ uint32_t val = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ -+ return count; \ -+} -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t val; \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ -+ uint32_t val = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ -+ return count; \ -+} -+ -+#elif defined(PLATFORM_INTERFACE) -+#include "dwc_otg_dbg.h" -+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ -+{ \ -+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t val; \ -+ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \ -+ __func__, _dev, platform_dev, otg_dev); \ -+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \ -+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ -+} -+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ -+ const char *buf, size_t count) \ -+{ \ -+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \ -+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \ -+ uint32_t val = simple_strtoul(buf, NULL, 16); \ -+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \ -+ return count; \ -+} -+ -+#endif -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); -+ -+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); -+ -+#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ -+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); -+ -+#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ -+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \ -+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); -+ -+/** @name Functions for Show/Store of Attributes */ -+/**@{*/ -+ -+/** -+ * Helper function returning the otg_device structure of the given device -+ */ -+static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) -+{ -+ dwc_otg_device_t *otg_dev; -+ DWC_OTG_GETDRVDEV(otg_dev, _dev); -+ return otg_dev; -+} -+ -+/** -+ * Show the register offset of the Register Access. -+ */ -+static ssize_t regoffset_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n", -+ otg_dev->os_dep.reg_offset); -+} -+ -+/** -+ * Set the register offset for the next Register Access Read/Write -+ */ -+static ssize_t regoffset_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t offset = simple_strtoul(buf, NULL, 16); -+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) -+ if (offset < SZ_256K) { -+#elif defined(PCI_INTERFACE) -+ if (offset < 0x00040000) { -+#endif -+ otg_dev->os_dep.reg_offset = offset; -+ } else { -+ dev_err(_dev, "invalid offset\n"); -+ } -+ -+ return count; -+} -+ -+DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store); -+ -+/** -+ * Show the value of the register at the offset in the reg_offset -+ * attribute. -+ */ -+static ssize_t regvalue_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val; -+ volatile uint32_t *addr; -+ -+ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { -+ /* Calculate the address */ -+ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + -+ (uint8_t *) otg_dev->os_dep.base); -+ val = DWC_READ_REG32(addr); -+ return snprintf(buf, -+ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1, -+ "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset, -+ val); -+ } else { -+ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset); -+ return sprintf(buf, "invalid offset\n"); -+ } -+} -+ -+/** -+ * Store the value in the register at the offset in the reg_offset -+ * attribute. -+ * -+ */ -+static ssize_t regvalue_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ volatile uint32_t *addr; -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); -+ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) { -+ /* Calculate the address */ -+ addr = (uint32_t *) (otg_dev->os_dep.reg_offset + -+ (uint8_t *) otg_dev->os_dep.base); -+ DWC_WRITE_REG32(addr, val); -+ } else { -+ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", -+ otg_dev->os_dep.reg_offset); -+ } -+ return count; -+} -+ -+DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store); -+ -+/* -+ * Attributes -+ */ -+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC"); -+ -+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); -+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected"); -+ -+DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg, -+ &(otg_dev->core_if->core_global_regs->gusbcfg), -+ "GUSBCFG"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz, -+ &(otg_dev->core_if->core_global_regs->grxfsiz), -+ "GRXFSIZ"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz, -+ &(otg_dev->core_if->core_global_regs->gnptxfsiz), -+ "GNPTXFSIZ"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl, -+ &(otg_dev->core_if->core_global_regs->gpvndctl), -+ "GPVNDCTL"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio, -+ &(otg_dev->core_if->core_global_regs->ggpio), -+ "GGPIO"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid), -+ "GUID"); -+DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid, -+ &(otg_dev->core_if->core_global_regs->gsnpsid), -+ "GSNPSID"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed"); -+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed"); -+ -+DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz, -+ &(otg_dev->core_if->core_global_regs->hptxfsiz), -+ "HPTXFSIZ"); -+DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0"); -+ -+/** -+ * @todo Add code to initiate the HNP. -+ */ -+/** -+ * Show the HNP status bit -+ */ -+static ssize_t hnp_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "HstNegScs = 0x%x\n", -+ dwc_otg_get_hnpstatus(otg_dev->core_if)); -+} -+ -+/** -+ * Set the HNP Request bit -+ */ -+static ssize_t hnp_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_hnpreq(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); -+ -+/** -+ * @todo Add code to initiate the SRP. -+ */ -+/** -+ * Show the SRP status bit -+ */ -+static ssize_t srp_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "SesReqScs = 0x%x\n", -+ dwc_otg_get_srpstatus(otg_dev->core_if)); -+#else -+ return sprintf(buf, "Host Only Mode!\n"); -+#endif -+} -+ -+/** -+ * Set the SRP Request bit -+ */ -+static ssize_t srp_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_pcd_initiate_srp(otg_dev->pcd); -+#endif -+ return count; -+} -+ -+DEVICE_ATTR(srp, 0644, srp_show, srp_store); -+ -+/** -+ * @todo Need to do more for power on/off? -+ */ -+/** -+ * Show the Bus Power status -+ */ -+static ssize_t buspower_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Bus Power = 0x%x\n", -+ dwc_otg_get_prtpower(otg_dev->core_if)); -+} -+ -+/** -+ * Set the Bus Power status -+ */ -+static ssize_t buspower_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t on = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_prtpower(otg_dev->core_if, on); -+ return count; -+} -+ -+DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); -+ -+/** -+ * @todo Need to do more for suspend? -+ */ -+/** -+ * Show the Bus Suspend status -+ */ -+static ssize_t bussuspend_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Bus Suspend = 0x%x\n", -+ dwc_otg_get_prtsuspend(otg_dev->core_if)); -+} -+ -+/** -+ * Set the Bus Suspend status -+ */ -+static ssize_t bussuspend_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_prtsuspend(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); -+ -+/** -+ * Show the Mode Change Ready Timer status -+ */ -+static ssize_t mode_ch_tim_en_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n", -+ dwc_otg_get_mode_ch_tim(otg_dev->core_if)); -+} -+ -+/** -+ * Set the Mode Change Ready Timer status -+ */ -+static ssize_t mode_ch_tim_en_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 16); -+ dwc_otg_set_mode_ch_tim(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store); -+ -+/** -+ * Show the value of HFIR Frame Interval bitfield -+ */ -+static ssize_t fr_interval_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Frame Interval = 0x%x\n", -+ dwc_otg_get_fr_interval(otg_dev->core_if)); -+} -+ -+/** -+ * Set the HFIR Frame Interval value -+ */ -+static ssize_t fr_interval_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t in = simple_strtoul(buf, NULL, 10); -+ dwc_otg_set_fr_interval(otg_dev->core_if, in); -+ return count; -+} -+ -+DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store); -+ -+/** -+ * Show the status of Remote Wakeup. -+ */ -+static ssize_t remote_wakeup_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ return sprintf(buf, -+ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n", -+ dwc_otg_get_remotewakesig(otg_dev->core_if), -+ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd), -+ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if)); -+#else -+ return sprintf(buf, "Host Only Mode!\n"); -+#endif /* DWC_HOST_ONLY */ -+} -+ -+/** -+ * Initiate a remote wakeup of the host. The Device control register -+ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable -+ * flag is set. -+ * -+ */ -+static ssize_t remote_wakeup_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ -+ if (val & 1) { -+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); -+ } else { -+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); -+ } -+#endif /* DWC_HOST_ONLY */ -+ return count; -+} -+ -+DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show, -+ remote_wakeup_store); -+ -+/** -+ * Show the whether core is hibernated or not. -+ */ -+static ssize_t rem_wakeup_pwrdn_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ if (dwc_otg_get_core_state(otg_dev->core_if)) { -+ DWC_PRINTF("Core is in hibernation\n"); -+ } else { -+ DWC_PRINTF("Core is not in hibernation\n"); -+ } -+#endif /* DWC_HOST_ONLY */ -+ return 0; -+} -+ -+extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset); -+ -+/** -+ * Initiate a remote wakeup of the device to exit from hibernation. -+ */ -+static ssize_t rem_wakeup_pwrdn_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0); -+#endif -+ return count; -+} -+ -+DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show, -+ rem_wakeup_pwrdn_store); -+ -+static ssize_t disconnect_us(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ -+#ifndef DWC_HOST_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ DWC_PRINTF("The Passed value is %04x\n", val); -+ -+ dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50); -+ -+#endif /* DWC_HOST_ONLY */ -+ return count; -+} -+ -+DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us); -+ -+/** -+ * Dump global registers and either host or device registers (depending on the -+ * current mode of the core). -+ */ -+static ssize_t regdump_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ dwc_otg_dump_global_registers(otg_dev->core_if); -+ if (dwc_otg_is_host_mode(otg_dev->core_if)) { -+ dwc_otg_dump_host_registers(otg_dev->core_if); -+ } else { -+ dwc_otg_dump_dev_registers(otg_dev->core_if); -+ -+ } -+ return sprintf(buf, "Register Dump\n"); -+} -+ -+DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0); -+ -+/** -+ * Dump global registers and either host or device registers (depending on the -+ * current mode of the core). -+ */ -+static ssize_t spramdump_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ //dwc_otg_dump_spram(otg_dev->core_if); -+ -+ return sprintf(buf, "SPRAM Dump\n"); -+} -+ -+DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0); -+ -+/** -+ * Dump the current hcd state. -+ */ -+static ssize_t hcddump_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_DEVICE_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_hcd_dump_state(otg_dev->hcd); -+#endif /* DWC_DEVICE_ONLY */ -+ return sprintf(buf, "HCD Dump\n"); -+} -+ -+DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0); -+ -+/** -+ * Dump the average frame remaining at SOF. This can be used to -+ * determine average interrupt latency. Frame remaining is also shown for -+ * start transfer and two additional sample points. -+ */ -+static ssize_t hcd_frrem_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+#ifndef DWC_DEVICE_ONLY -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ dwc_otg_hcd_dump_frrem(otg_dev->hcd); -+#endif /* DWC_DEVICE_ONLY */ -+ return sprintf(buf, "HCD Dump Frame Remaining\n"); -+} -+ -+DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0); -+ -+/** -+ * Displays the time required to read the GNPTXFSIZ register many times (the -+ * output shows the number of times the register is read). -+ */ -+#define RW_REG_COUNT 10000000 -+#define MSEC_PER_JIFFIE 1000/HZ -+static ssize_t rd_reg_test_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ int i; -+ int time; -+ int start_jiffies; -+ -+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", -+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); -+ start_jiffies = jiffies; -+ for (i = 0; i < RW_REG_COUNT; i++) { -+ dwc_otg_get_gnptxfsiz(otg_dev->core_if); -+ } -+ time = jiffies - start_jiffies; -+ return sprintf(buf, -+ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", -+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); -+} -+ -+DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0); -+ -+/** -+ * Displays the time required to write the GNPTXFSIZ register many times (the -+ * output shows the number of times the register is written). -+ */ -+static ssize_t wr_reg_test_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t reg_val; -+ int i; -+ int time; -+ int start_jiffies; -+ -+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", -+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); -+ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if); -+ start_jiffies = jiffies; -+ for (i = 0; i < RW_REG_COUNT; i++) { -+ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val); -+ } -+ time = jiffies - start_jiffies; -+ return sprintf(buf, -+ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", -+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); -+} -+ -+DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0); -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ -+/** -+* Show the lpm_response attribute. -+*/ -+static ssize_t lpmresp_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ -+ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) -+ return sprintf(buf, "** LPM is DISABLED **\n"); -+ -+ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { -+ return sprintf(buf, "** Current mode is not device mode\n"); -+ } -+ return sprintf(buf, "lpm_response = %d\n", -+ dwc_otg_get_lpmresponse(otg_dev->core_if)); -+} -+ -+/** -+* Store the lpm_response attribute. -+*/ -+static ssize_t lpmresp_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ uint32_t val = simple_strtoul(buf, NULL, 16); -+ -+ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) { -+ return 0; -+ } -+ -+ if (!dwc_otg_is_device_mode(otg_dev->core_if)) { -+ return 0; -+ } -+ -+ dwc_otg_set_lpmresponse(otg_dev->core_if, val); -+ return count; -+} -+ -+DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store); -+ -+/** -+* Show the sleep_status attribute. -+*/ -+static ssize_t sleepstatus_show(struct device *_dev, -+ struct device_attribute *attr, char *buf) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ return sprintf(buf, "Sleep Status = %d\n", -+ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)); -+} -+ -+/** -+ * Store the sleep_status attribure. -+ */ -+static ssize_t sleepstatus_store(struct device *_dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev); -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ -+ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) { -+ if (dwc_otg_is_host_mode(core_if)) { -+ -+ DWC_PRINTF("Host initiated resume\n"); -+ dwc_otg_set_prtresume(otg_dev->core_if, 1); -+ } -+ } -+ -+ return count; -+} -+ -+DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show, -+ sleepstatus_store); -+ -+#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */ -+ -+/**@}*/ -+ -+/** -+ * Create the device files -+ */ -+void dwc_otg_attr_create( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ) -+{ -+ int error; -+ -+ error = device_create_file(&dev->dev, &dev_attr_regoffset); -+ error = device_create_file(&dev->dev, &dev_attr_regvalue); -+ error = device_create_file(&dev->dev, &dev_attr_mode); -+ error = device_create_file(&dev->dev, &dev_attr_hnpcapable); -+ error = device_create_file(&dev->dev, &dev_attr_srpcapable); -+ error = device_create_file(&dev->dev, &dev_attr_hsic_connect); -+ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic); -+ error = device_create_file(&dev->dev, &dev_attr_hnp); -+ error = device_create_file(&dev->dev, &dev_attr_srp); -+ error = device_create_file(&dev->dev, &dev_attr_buspower); -+ error = device_create_file(&dev->dev, &dev_attr_bussuspend); -+ error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en); -+ error = device_create_file(&dev->dev, &dev_attr_fr_interval); -+ error = device_create_file(&dev->dev, &dev_attr_busconnected); -+ error = device_create_file(&dev->dev, &dev_attr_gotgctl); -+ error = device_create_file(&dev->dev, &dev_attr_gusbcfg); -+ error = device_create_file(&dev->dev, &dev_attr_grxfsiz); -+ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz); -+ error = device_create_file(&dev->dev, &dev_attr_gpvndctl); -+ error = device_create_file(&dev->dev, &dev_attr_ggpio); -+ error = device_create_file(&dev->dev, &dev_attr_guid); -+ error = device_create_file(&dev->dev, &dev_attr_gsnpsid); -+ error = device_create_file(&dev->dev, &dev_attr_devspeed); -+ error = device_create_file(&dev->dev, &dev_attr_enumspeed); -+ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz); -+ error = device_create_file(&dev->dev, &dev_attr_hprt0); -+ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup); -+ error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); -+ error = device_create_file(&dev->dev, &dev_attr_disconnect_us); -+ error = device_create_file(&dev->dev, &dev_attr_regdump); -+ error = device_create_file(&dev->dev, &dev_attr_spramdump); -+ error = device_create_file(&dev->dev, &dev_attr_hcddump); -+ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem); -+ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test); -+ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ error = device_create_file(&dev->dev, &dev_attr_lpm_response); -+ error = device_create_file(&dev->dev, &dev_attr_sleep_status); -+#endif -+} -+ -+/** -+ * Remove the device files -+ */ -+void dwc_otg_attr_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ) -+{ -+ device_remove_file(&dev->dev, &dev_attr_regoffset); -+ device_remove_file(&dev->dev, &dev_attr_regvalue); -+ device_remove_file(&dev->dev, &dev_attr_mode); -+ device_remove_file(&dev->dev, &dev_attr_hnpcapable); -+ device_remove_file(&dev->dev, &dev_attr_srpcapable); -+ device_remove_file(&dev->dev, &dev_attr_hsic_connect); -+ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic); -+ device_remove_file(&dev->dev, &dev_attr_hnp); -+ device_remove_file(&dev->dev, &dev_attr_srp); -+ device_remove_file(&dev->dev, &dev_attr_buspower); -+ device_remove_file(&dev->dev, &dev_attr_bussuspend); -+ device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en); -+ device_remove_file(&dev->dev, &dev_attr_fr_interval); -+ device_remove_file(&dev->dev, &dev_attr_busconnected); -+ device_remove_file(&dev->dev, &dev_attr_gotgctl); -+ device_remove_file(&dev->dev, &dev_attr_gusbcfg); -+ device_remove_file(&dev->dev, &dev_attr_grxfsiz); -+ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz); -+ device_remove_file(&dev->dev, &dev_attr_gpvndctl); -+ device_remove_file(&dev->dev, &dev_attr_ggpio); -+ device_remove_file(&dev->dev, &dev_attr_guid); -+ device_remove_file(&dev->dev, &dev_attr_gsnpsid); -+ device_remove_file(&dev->dev, &dev_attr_devspeed); -+ device_remove_file(&dev->dev, &dev_attr_enumspeed); -+ device_remove_file(&dev->dev, &dev_attr_hptxfsiz); -+ device_remove_file(&dev->dev, &dev_attr_hprt0); -+ device_remove_file(&dev->dev, &dev_attr_remote_wakeup); -+ device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn); -+ device_remove_file(&dev->dev, &dev_attr_disconnect_us); -+ device_remove_file(&dev->dev, &dev_attr_regdump); -+ device_remove_file(&dev->dev, &dev_attr_spramdump); -+ device_remove_file(&dev->dev, &dev_attr_hcddump); -+ device_remove_file(&dev->dev, &dev_attr_hcd_frrem); -+ device_remove_file(&dev->dev, &dev_attr_rd_reg_test); -+ device_remove_file(&dev->dev, &dev_attr_wr_reg_test); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ device_remove_file(&dev->dev, &dev_attr_lpm_response); -+ device_remove_file(&dev->dev, &dev_attr_sleep_status); -+#endif -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h -@@ -0,0 +1,89 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ -+ * $Revision: #13 $ -+ * $Date: 2010/06/21 $ -+ * $Change: 1532021 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_OTG_ATTR_H__) -+#define __DWC_OTG_ATTR_H__ -+ -+/** @file -+ * This file contains the interface to the Linux device attributes. -+ */ -+extern struct device_attribute dev_attr_regoffset; -+extern struct device_attribute dev_attr_regvalue; -+ -+extern struct device_attribute dev_attr_mode; -+extern struct device_attribute dev_attr_hnpcapable; -+extern struct device_attribute dev_attr_srpcapable; -+extern struct device_attribute dev_attr_hnp; -+extern struct device_attribute dev_attr_srp; -+extern struct device_attribute dev_attr_buspower; -+extern struct device_attribute dev_attr_bussuspend; -+extern struct device_attribute dev_attr_mode_ch_tim_en; -+extern struct device_attribute dev_attr_fr_interval; -+extern struct device_attribute dev_attr_busconnected; -+extern struct device_attribute dev_attr_gotgctl; -+extern struct device_attribute dev_attr_gusbcfg; -+extern struct device_attribute dev_attr_grxfsiz; -+extern struct device_attribute dev_attr_gnptxfsiz; -+extern struct device_attribute dev_attr_gpvndctl; -+extern struct device_attribute dev_attr_ggpio; -+extern struct device_attribute dev_attr_guid; -+extern struct device_attribute dev_attr_gsnpsid; -+extern struct device_attribute dev_attr_devspeed; -+extern struct device_attribute dev_attr_enumspeed; -+extern struct device_attribute dev_attr_hptxfsiz; -+extern struct device_attribute dev_attr_hprt0; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+extern struct device_attribute dev_attr_lpm_response; -+extern struct device_attribute devi_attr_sleep_status; -+#endif -+ -+void dwc_otg_attr_create( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+ -+void dwc_otg_attr_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c -@@ -0,0 +1,1876 @@ -+/* ========================================================================== -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * This file contains the most of the CFI(Core Feature Interface) -+ * implementation for the OTG. -+ */ -+ -+#ifdef DWC_UTE_CFI -+ -+#include "dwc_otg_pcd.h" -+#include "dwc_otg_cfi.h" -+ -+/** This definition should actually migrate to the Portability Library */ -+#define DWC_CONSTANT_CPU_TO_LE16(x) (x) -+ -+extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex); -+ -+static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen); -+static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, -+ struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *ctrl_req); -+static int cfi_set_feature_value(struct dwc_otg_pcd *pcd); -+static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req); -+static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep); -+ -+static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if); -+static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue); -+static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue); -+ -+static uint8_t resize_fifos(dwc_otg_core_if_t * core_if); -+ -+/** This is the header of the all features descriptor */ -+static cfi_all_features_header_t all_props_desc_header = { -+ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100), -+ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG), -+ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9), -+}; -+ -+/** This is an array of statically allocated feature descriptors */ -+static cfi_feature_desc_header_t prop_descs[] = { -+ -+ /* FT_ID_DMA_MODE */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1), -+ }, -+ -+ /* FT_ID_DMA_BUFFER_SETUP */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_DMA_BUFF_ALIGN */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ }, -+ -+ /* FT_ID_DMA_CONCAT_SETUP */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_DMA_CIRCULAR */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_THRESHOLD_SETUP */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6), -+ }, -+ -+ /* FT_ID_DFIFO_DEPTH */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH), -+ .bmAttributes = CFI_FEATURE_ATTR_RO, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ }, -+ -+ /* FT_ID_TX_FIFO_DEPTH */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ }, -+ -+ /* FT_ID_RX_FIFO_DEPTH */ -+ { -+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH), -+ .bmAttributes = CFI_FEATURE_ATTR_RW, -+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2), -+ } -+}; -+ -+/** The table of feature names */ -+cfi_string_t prop_name_table[] = { -+ {FT_ID_DMA_MODE, "dma_mode"}, -+ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"}, -+ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"}, -+ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"}, -+ {FT_ID_DMA_CIRCULAR, "buffer_circular"}, -+ {FT_ID_THRESHOLD_SETUP, "threshold_setup"}, -+ {FT_ID_DFIFO_DEPTH, "dfifo_depth"}, -+ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"}, -+ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"}, -+ {} -+}; -+ -+/************************************************************************/ -+ -+/** -+ * Returns the name of the feature by its ID -+ * or NULL if no featute ID matches. -+ * -+ */ -+const uint8_t *get_prop_name(uint16_t prop_id, int *len) -+{ -+ cfi_string_t *pstr; -+ *len = 0; -+ -+ for (pstr = prop_name_table; pstr && pstr->s; pstr++) { -+ if (pstr->id == prop_id) { -+ *len = DWC_STRLEN(pstr->s); -+ return pstr->s; -+ } -+ } -+ return NULL; -+} -+ -+/** -+ * This function handles all CFI specific control requests. -+ * -+ * Return a negative value to stall the DCE. -+ */ -+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl) -+{ -+ int retval = 0; -+ dwc_otg_pcd_ep_t *ep = NULL; -+ cfiobject_t *cfi = pcd->cfi; -+ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); -+ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength); -+ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue); -+ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex); -+ uint32_t regaddr = 0; -+ uint32_t regval = 0; -+ -+ /* Save this Control Request in the CFI object. -+ * The data field will be assigned in the data stage completion CB function. -+ */ -+ cfi->ctrl_req = *ctrl; -+ cfi->ctrl_req.data = NULL; -+ -+ cfi->need_gadget_att = 0; -+ cfi->need_status_in_complete = 0; -+ -+ switch (ctrl->bRequest) { -+ case VEN_CORE_GET_FEATURES: -+ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN); -+ if (retval >= 0) { -+ //dump_msg(cfi->buf_in.buf, retval); -+ ep = &pcd->ep0; -+ -+ retval = min((uint16_t) retval, wLen); -+ /* Transfer this buffer to the host through the EP0-IN EP */ -+ ep->dwc_ep.dma_addr = cfi->buf_in.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_len = retval; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ } -+ retval = 0; -+ break; -+ -+ case VEN_CORE_GET_FEATURE: -+ CFI_INFO("VEN_CORE_GET_FEATURE\n"); -+ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN, -+ pcd, ctrl); -+ if (retval >= 0) { -+ ep = &pcd->ep0; -+ -+ retval = min((uint16_t) retval, wLen); -+ /* Transfer this buffer to the host through the EP0-IN EP */ -+ ep->dwc_ep.dma_addr = cfi->buf_in.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_len = retval; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ } -+ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval); -+ dump_msg(cfi->buf_in.buf, retval); -+ break; -+ -+ case VEN_CORE_SET_FEATURE: -+ CFI_INFO("VEN_CORE_SET_FEATURE\n"); -+ /* Set up an XFER to get the data stage of the control request, -+ * which is the new value of the feature to be modified. -+ */ -+ ep = &pcd->ep0; -+ ep->dwc_ep.is_in = 0; -+ ep->dwc_ep.dma_addr = cfi->buf_out.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_len = wLen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ /* Read the control write's data stage */ -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ retval = 0; -+ break; -+ -+ case VEN_CORE_RESET_FEATURES: -+ CFI_INFO("VEN_CORE_RESET_FEATURES\n"); -+ cfi->need_gadget_att = 1; -+ cfi->need_status_in_complete = 1; -+ retval = cfi_preproc_reset(pcd, ctrl); -+ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval); -+ break; -+ -+ case VEN_CORE_ACTIVATE_FEATURES: -+ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n"); -+ break; -+ -+ case VEN_CORE_READ_REGISTER: -+ CFI_INFO("VEN_CORE_READ_REGISTER\n"); -+ /* wValue optionally contains the HI WORD of the register offset and -+ * wIndex contains the LOW WORD of the register offset -+ */ -+ if (wValue == 0) { -+ /* @TODO - MAS - fix the access to the base field */ -+ regaddr = 0; -+ //regaddr = (uint32_t) pcd->otg_dev->os_dep.base; -+ //GET_CORE_IF(pcd)->co -+ regaddr |= wIndex; -+ } else { -+ regaddr = (wValue << 16) | wIndex; -+ } -+ -+ /* Read a 32-bit value of the memory at the regaddr */ -+ regval = DWC_READ_REG32((uint32_t *) regaddr); -+ -+ ep = &pcd->ep0; -+ dwc_memcpy(cfi->buf_in.buf, ®val, sizeof(uint32_t)); -+ ep->dwc_ep.is_in = 1; -+ ep->dwc_ep.dma_addr = cfi->buf_in.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf; -+ ep->dwc_ep.xfer_len = wLen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ cfi->need_gadget_att = 0; -+ retval = 0; -+ break; -+ -+ case VEN_CORE_WRITE_REGISTER: -+ CFI_INFO("VEN_CORE_WRITE_REGISTER\n"); -+ /* Set up an XFER to get the data stage of the control request, -+ * which is the new value of the register to be modified. -+ */ -+ ep = &pcd->ep0; -+ ep->dwc_ep.is_in = 0; -+ ep->dwc_ep.dma_addr = cfi->buf_out.addr; -+ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_buff = cfi->buf_out.buf; -+ ep->dwc_ep.xfer_len = wLen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ pcd->ep0_pending = 1; -+ /* Read the control write's data stage */ -+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep); -+ retval = 0; -+ break; -+ -+ default: -+ retval = -DWC_E_NOT_SUPPORTED; -+ break; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function prepares the core features descriptors and copies its -+ * raw representation into the buffer <buf>. -+ * -+ * The buffer structure is as follows: -+ * all_features_header (8 bytes) -+ * features_#1 (8 bytes + feature name string length) -+ * features_#2 (8 bytes + feature name string length) -+ * ..... -+ * features_#n - where n=the total count of feature descriptors -+ */ -+static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen) -+{ -+ cfi_feature_desc_header_t *prop_hdr = prop_descs; -+ cfi_feature_desc_header_t *prop; -+ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header; -+ cfi_all_features_header_t *tmp; -+ uint8_t *tmpbuf = buf; -+ const uint8_t *pname = NULL; -+ int i, j, namelen = 0, totlen; -+ -+ /* Prepare and copy the core features into the buffer */ -+ CFI_INFO("%s:\n", __func__); -+ -+ tmp = (cfi_all_features_header_t *) tmpbuf; -+ *tmp = *all_props_hdr; -+ tmpbuf += CFI_ALL_FEATURES_HDR_LEN; -+ -+ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t); -+ for (i = 0; i < j; i++, prop_hdr++) { -+ pname = get_prop_name(prop_hdr->wFeatureID, &namelen); -+ prop = (cfi_feature_desc_header_t *) tmpbuf; -+ *prop = *prop_hdr; -+ -+ prop->bNameLen = namelen; -+ prop->wLength = -+ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN + -+ namelen); -+ -+ tmpbuf += CFI_FEATURE_DESC_HDR_LEN; -+ dwc_memcpy(tmpbuf, pname, namelen); -+ tmpbuf += namelen; -+ } -+ -+ totlen = tmpbuf - buf; -+ -+ if (totlen > 0) { -+ tmp = (cfi_all_features_header_t *) buf; -+ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen); -+ } -+ -+ return totlen; -+} -+ -+/** -+ * This function releases all the dynamic memory in the CFI object. -+ */ -+static void cfi_release(cfiobject_t * cfiobj) -+{ -+ cfi_ep_t *cfiep; -+ dwc_list_link_t *tmp; -+ -+ CFI_INFO("%s\n", __func__); -+ -+ if (cfiobj->buf_in.buf) { -+ DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf, -+ cfiobj->buf_in.addr); -+ cfiobj->buf_in.buf = NULL; -+ } -+ -+ if (cfiobj->buf_out.buf) { -+ DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf, -+ cfiobj->buf_out.addr); -+ cfiobj->buf_out.buf = NULL; -+ } -+ -+ /* Free the Buffer Setup values for each EP */ -+ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ cfi_free_ep_bs_dyn_data(cfiep); -+ } -+} -+ -+/** -+ * This function frees the dynamically allocated EP buffer setup data. -+ */ -+static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep) -+{ -+ if (cfiep->bm_sg) { -+ DWC_FREE(cfiep->bm_sg); -+ cfiep->bm_sg = NULL; -+ } -+ -+ if (cfiep->bm_align) { -+ DWC_FREE(cfiep->bm_align); -+ cfiep->bm_align = NULL; -+ } -+ -+ if (cfiep->bm_concat) { -+ if (NULL != cfiep->bm_concat->wTxBytes) { -+ DWC_FREE(cfiep->bm_concat->wTxBytes); -+ cfiep->bm_concat->wTxBytes = NULL; -+ } -+ DWC_FREE(cfiep->bm_concat); -+ cfiep->bm_concat = NULL; -+ } -+} -+ -+/** -+ * This function initializes the default values of the features -+ * for a specific endpoint and should be called only once when -+ * the EP is enabled first time. -+ */ -+static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep) -+{ -+ int retval = 0; -+ -+ cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t)); -+ if (NULL == cfiep->bm_sg) { -+ CFI_INFO("Failed to allocate memory for SG feature value\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); -+ -+ /* For the Concatenation feature's default value we do not allocate -+ * memory for the wTxBytes field - it will be done in the set_feature_value -+ * request handler. -+ */ -+ cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t)); -+ if (NULL == cfiep->bm_concat) { -+ CFI_INFO -+ ("Failed to allocate memory for CONCATENATION feature value\n"); -+ DWC_FREE(cfiep->bm_sg); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); -+ -+ cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t)); -+ if (NULL == cfiep->bm_align) { -+ CFI_INFO -+ ("Failed to allocate memory for Alignment feature value\n"); -+ DWC_FREE(cfiep->bm_sg); -+ DWC_FREE(cfiep->bm_concat); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t)); -+ -+ return retval; -+} -+ -+/** -+ * The callback function that notifies the CFI on the activation of -+ * an endpoint in the PCD. The following steps are done in this function: -+ * -+ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's -+ * active endpoint) -+ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP -+ * Set the Buffer Mode to standard -+ * Initialize the default values for all EP modes (SG, Circular, Concat, Align) -+ * Add the cfi_ep_t object to the list of active endpoints in the CFI object -+ */ -+static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, -+ struct dwc_otg_pcd_ep *ep) -+{ -+ cfi_ep_t *cfiep; -+ int retval = -DWC_E_NOT_SUPPORTED; -+ -+ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__, -+ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress); -+ /* MAS - Check whether this endpoint already is in the list */ -+ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); -+ -+ if (NULL == cfiep) { -+ /* Allocate a cfi_ep_t object */ -+ cfiep = DWC_ALLOC(sizeof(cfi_ep_t)); -+ if (NULL == cfiep) { -+ CFI_INFO -+ ("Unable to allocate memory for <cfiep> in function %s\n", -+ __func__); -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_memset(cfiep, 0, sizeof(cfi_ep_t)); -+ -+ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */ -+ cfiep->ep = ep; -+ -+ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */ -+ ep->dwc_ep.descs = -+ DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP * -+ sizeof(dwc_otg_dma_desc_t), -+ &ep->dwc_ep.descs_dma_addr); -+ -+ if (NULL == ep->dwc_ep.descs) { -+ DWC_FREE(cfiep); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ DWC_LIST_INIT(&cfiep->lh); -+ -+ /* Set the buffer mode to BM_STANDARD. It will be modified -+ * when building descriptors for a specific buffer mode */ -+ ep->dwc_ep.buff_mode = BM_STANDARD; -+ -+ /* Create and initialize the default values for this EP's Buffer modes */ -+ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0) -+ return retval; -+ -+ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */ -+ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh); -+ retval = 0; -+ } else { /* The sought EP already is in the list */ -+ CFI_INFO("%s: The sought EP already is in the list\n", -+ __func__); -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function is called when the data stage of a 3-stage Control Write request -+ * is complete. -+ * -+ */ -+static int cfi_ctrl_write_complete(struct cfiobject *cfi, -+ struct dwc_otg_pcd *pcd) -+{ -+ uint32_t addr, reg_value; -+ uint16_t wIndex, wValue; -+ uint8_t bRequest; -+ uint8_t *buf = cfi->buf_out.buf; -+ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved; -+ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req; -+ int retval = -DWC_E_NOT_SUPPORTED; -+ -+ CFI_INFO("%s\n", __func__); -+ -+ bRequest = ctrl_req->bRequest; -+ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); -+ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); -+ -+ /* -+ * Save the pointer to the data stage in the ctrl_req's <data> field. -+ * The request should be already saved in the command stage by now. -+ */ -+ ctrl_req->data = cfi->buf_out.buf; -+ cfi->need_status_in_complete = 0; -+ cfi->need_gadget_att = 0; -+ -+ switch (bRequest) { -+ case VEN_CORE_WRITE_REGISTER: -+ /* The buffer contains raw data of the new value for the register */ -+ reg_value = *((uint32_t *) buf); -+ if (wValue == 0) { -+ addr = 0; -+ //addr = (uint32_t) pcd->otg_dev->os_dep.base; -+ addr += wIndex; -+ } else { -+ addr = (wValue << 16) | wIndex; -+ } -+ -+ //writel(reg_value, addr); -+ -+ retval = 0; -+ cfi->need_status_in_complete = 1; -+ break; -+ -+ case VEN_CORE_SET_FEATURE: -+ /* The buffer contains raw data of the new value of the feature */ -+ retval = cfi_set_feature_value(pcd); -+ if (retval < 0) -+ return retval; -+ -+ cfi->need_status_in_complete = 1; -+ break; -+ -+ default: -+ break; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function builds the DMA descriptors for the SG buffer mode. -+ */ -+static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ struct dwc_otg_pcd_ep *ep = cfiep->ep; -+ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg; -+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; -+ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; -+ dma_addr_t buff_addr = req->dma; -+ int i; -+ uint32_t txsize, off; -+ -+ txsize = sgval->wSize; -+ off = sgval->bOffset; -+ -+// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n", -+// __func__, cfiep->ep->ep.name, txsize, off); -+ -+ for (i = 0; i < sgval->bCount; i++) { -+ desc->status.b.bs = BS_HOST_BUSY; -+ desc->buf = buff_addr; -+ desc->status.b.l = 0; -+ desc->status.b.ioc = 0; -+ desc->status.b.sp = 0; -+ desc->status.b.bytes = txsize; -+ desc->status.b.bs = BS_HOST_READY; -+ -+ /* Set the next address of the buffer */ -+ buff_addr += txsize + off; -+ desc_last = desc; -+ desc++; -+ } -+ -+ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ -+ desc_last->status.b.l = 1; -+ desc_last->status.b.ioc = 1; -+ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; -+ /* Save the last DMA descriptor pointer */ -+ cfiep->dma_desc_last = desc_last; -+ cfiep->desc_count = sgval->bCount; -+} -+ -+/** -+ * This function builds the DMA descriptors for the Concatenation buffer mode. -+ */ -+static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ struct dwc_otg_pcd_ep *ep = cfiep->ep; -+ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat; -+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; -+ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs; -+ dma_addr_t buff_addr = req->dma; -+ int i; -+ uint16_t *txsize; -+ -+ txsize = concatval->wTxBytes; -+ -+ for (i = 0; i < concatval->hdr.bDescCount; i++) { -+ desc->buf = buff_addr; -+ desc->status.b.bs = BS_HOST_BUSY; -+ desc->status.b.l = 0; -+ desc->status.b.ioc = 0; -+ desc->status.b.sp = 0; -+ desc->status.b.bytes = *txsize; -+ desc->status.b.bs = BS_HOST_READY; -+ -+ txsize++; -+ /* Set the next address of the buffer */ -+ buff_addr += UGETW(ep->desc->wMaxPacketSize); -+ desc_last = desc; -+ desc++; -+ } -+ -+ /* Set the last, ioc and sp bits on the Last DMA Descriptor */ -+ desc_last->status.b.l = 1; -+ desc_last->status.b.ioc = 1; -+ desc_last->status.b.sp = ep->dwc_ep.sent_zlp; -+ cfiep->dma_desc_last = desc_last; -+ cfiep->desc_count = concatval->hdr.bDescCount; -+} -+ -+/** -+ * This function builds the DMA descriptors for the Circular buffer mode -+ */ -+static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ /* @todo: MAS - add implementation when this feature needs to be tested */ -+} -+ -+/** -+ * This function builds the DMA descriptors for the Alignment buffer mode -+ */ -+static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep, -+ dwc_otg_pcd_request_t * req) -+{ -+ struct dwc_otg_pcd_ep *ep = cfiep->ep; -+ ddma_align_buffer_setup_t *alignval = cfiep->bm_align; -+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs; -+ dma_addr_t buff_addr = req->dma; -+ -+ desc->status.b.bs = BS_HOST_BUSY; -+ desc->status.b.l = 1; -+ desc->status.b.ioc = 1; -+ desc->status.b.sp = ep->dwc_ep.sent_zlp; -+ desc->status.b.bytes = req->length; -+ /* Adjust the buffer alignment */ -+ desc->buf = (buff_addr + alignval->bAlign); -+ desc->status.b.bs = BS_HOST_READY; -+ cfiep->dma_desc_last = desc; -+ cfiep->desc_count = 1; -+} -+ -+/** -+ * This function builds the DMA descriptors chain for different modes of the -+ * buffer setup of an endpoint. -+ */ -+static void cfi_build_descriptors(struct cfiobject *cfi, -+ struct dwc_otg_pcd *pcd, -+ struct dwc_otg_pcd_ep *ep, -+ dwc_otg_pcd_request_t * req) -+{ -+ cfi_ep_t *cfiep; -+ -+ /* Get the cfiep by the dwc_otg_pcd_ep */ -+ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Unable to find a matching active endpoint\n", -+ __func__); -+ return; -+ } -+ -+ cfiep->xfer_len = req->length; -+ -+ /* Iterate through all the DMA descriptors */ -+ switch (cfiep->ep->dwc_ep.buff_mode) { -+ case BM_SG: -+ cfi_build_sg_descs(cfi, cfiep, req); -+ break; -+ -+ case BM_CONCAT: -+ cfi_build_concat_descs(cfi, cfiep, req); -+ break; -+ -+ case BM_CIRCULAR: -+ cfi_build_circ_descs(cfi, cfiep, req); -+ break; -+ -+ case BM_ALIGN: -+ cfi_build_align_descs(cfi, cfiep, req); -+ break; -+ -+ default: -+ break; -+ } -+} -+ -+/** -+ * Allocate DMA buffer for different Buffer modes. -+ */ -+static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd, -+ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma, -+ unsigned size, gfp_t flags) -+{ -+ return DWC_DMA_ALLOC(size, dma); -+} -+ -+/** -+ * This function initializes the CFI object. -+ */ -+int init_cfi(cfiobject_t * cfiobj) -+{ -+ CFI_INFO("%s\n", __func__); -+ -+ /* Allocate a buffer for IN XFERs */ -+ cfiobj->buf_in.buf = -+ DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr); -+ if (NULL == cfiobj->buf_in.buf) { -+ CFI_INFO("Unable to allocate buffer for INs\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Allocate a buffer for OUT XFERs */ -+ cfiobj->buf_out.buf = -+ DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr); -+ if (NULL == cfiobj->buf_out.buf) { -+ CFI_INFO("Unable to allocate buffer for OUT\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Initialize the callback function pointers */ -+ cfiobj->ops.release = cfi_release; -+ cfiobj->ops.ep_enable = cfi_ep_enable; -+ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete; -+ cfiobj->ops.build_descriptors = cfi_build_descriptors; -+ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf; -+ -+ /* Initialize the list of active endpoints in the CFI object */ -+ DWC_LIST_INIT(&cfiobj->active_eps); -+ -+ return 0; -+} -+ -+/** -+ * This function reads the required feature's current value into the buffer -+ * -+ * @retval: Returns negative as error, or the data length of the feature -+ */ -+static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen, -+ struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *ctrl_req) -+{ -+ int retval = -DWC_E_NOT_SUPPORTED; -+ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd); -+ uint16_t dfifo, rxfifo, txfifo; -+ -+ switch (ctrl_req->wIndex) { -+ /* Whether the DDMA is enabled or not */ -+ case FT_ID_DMA_MODE: -+ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0; -+ retval = 1; -+ break; -+ -+ case FT_ID_DMA_BUFFER_SETUP: -+ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req); -+ break; -+ -+ case FT_ID_DMA_BUFF_ALIGN: -+ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req); -+ break; -+ -+ case FT_ID_DMA_CONCAT_SETUP: -+ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req); -+ break; -+ -+ case FT_ID_DMA_CIRCULAR: -+ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n"); -+ break; -+ -+ case FT_ID_THRESHOLD_SETUP: -+ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n"); -+ break; -+ -+ case FT_ID_DFIFO_DEPTH: -+ dfifo = get_dfifo_size(coreif); -+ *((uint16_t *) buf) = dfifo; -+ retval = sizeof(uint16_t); -+ break; -+ -+ case FT_ID_TX_FIFO_DEPTH: -+ retval = get_txfifo_size(pcd, ctrl_req->wValue); -+ if (retval >= 0) { -+ txfifo = retval; -+ *((uint16_t *) buf) = txfifo; -+ retval = sizeof(uint16_t); -+ } -+ break; -+ -+ case FT_ID_RX_FIFO_DEPTH: -+ retval = get_rxfifo_size(coreif, ctrl_req->wValue); -+ if (retval >= 0) { -+ rxfifo = retval; -+ *((uint16_t *) buf) = rxfifo; -+ retval = sizeof(uint16_t); -+ } -+ break; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function resets the SG for the specified EP to its default value -+ */ -+static int cfi_reset_sg_val(cfi_ep_t * cfiep) -+{ -+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); -+ return 0; -+} -+ -+/** -+ * This function resets the Alignment for the specified EP to its default value -+ */ -+static int cfi_reset_align_val(cfi_ep_t * cfiep) -+{ -+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t)); -+ return 0; -+} -+ -+/** -+ * This function resets the Concatenation for the specified EP to its default value -+ * This function will also set the value of the wTxBytes field to NULL after -+ * freeing the memory previously allocated for this field. -+ */ -+static int cfi_reset_concat_val(cfi_ep_t * cfiep) -+{ -+ /* First we need to free the wTxBytes field */ -+ if (cfiep->bm_concat->wTxBytes) { -+ DWC_FREE(cfiep->bm_concat->wTxBytes); -+ cfiep->bm_concat->wTxBytes = NULL; -+ } -+ -+ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t)); -+ return 0; -+} -+ -+/** -+ * This function resets all the buffer setups of the specified endpoint -+ */ -+static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep) -+{ -+ cfi_reset_sg_val(cfiep); -+ cfi_reset_align_val(cfiep); -+ cfi_reset_concat_val(cfiep); -+ return 0; -+} -+ -+static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr, -+ uint8_t rx_rst, uint8_t tx_rst) -+{ -+ int retval = -DWC_E_INVALID; -+ uint16_t tx_siz[15]; -+ uint16_t rx_siz = 0; -+ dwc_otg_pcd_ep_t *ep = NULL; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; -+ -+ if (rx_rst) { -+ rx_siz = params->dev_rx_fifo_size; -+ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz; -+ } -+ -+ if (tx_rst) { -+ if (ep_addr == 0) { -+ int i; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ tx_siz[i] = -+ core_if->core_params->dev_tx_fifo_size[i]; -+ core_if->core_params->dev_tx_fifo_size[i] = -+ core_if->init_txfsiz[i]; -+ } -+ } else { -+ -+ ep = get_ep_by_addr(pcd, ep_addr); -+ -+ if (NULL == ep) { -+ CFI_INFO -+ ("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, ep_addr); -+ return -DWC_E_INVALID; -+ } -+ -+ tx_siz[0] = -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - -+ 1]; -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = -+ GET_CORE_IF(pcd)->init_txfsiz[ep-> -+ dwc_ep.tx_fifo_num - -+ 1]; -+ } -+ } -+ -+ if (resize_fifos(GET_CORE_IF(pcd))) { -+ retval = 0; -+ } else { -+ CFI_INFO -+ ("%s: Error resetting the feature Reset All(FIFO size)\n", -+ __func__); -+ if (rx_rst) { -+ params->dev_rx_fifo_size = rx_siz; -+ } -+ -+ if (tx_rst) { -+ if (ep_addr == 0) { -+ int i; -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; -+ i++) { -+ core_if-> -+ core_params->dev_tx_fifo_size[i] = -+ tx_siz[i]; -+ } -+ } else { -+ params->dev_tx_fifo_size[ep-> -+ dwc_ep.tx_fifo_num - -+ 1] = tx_siz[0]; -+ } -+ } -+ retval = -DWC_E_INVALID; -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1); -+ if (retval < 0) { -+ return retval; -+ } -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_ep_reset_all_setup_vals(cfiep); -+ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_ep_reset_all_setup_vals(cfiep); -+ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD; -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Reset All\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd, -+ uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_reset_sg_val(cfiep); -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_reset_sg_val(cfiep); -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Buffer Setup\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_reset_concat_val(cfiep); -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_reset_concat_val(cfiep); -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Concatenation Value\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+} -+ -+static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr) -+{ -+ int retval = 0; -+ cfi_ep_t *cfiep; -+ cfiobject_t *cfi = pcd->cfi; -+ dwc_list_link_t *tmp; -+ -+ /* If the EP address is known then reset the features for only that EP */ -+ if (addr) { -+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == cfiep) { -+ CFI_INFO("%s: Error getting the EP address 0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ retval = cfi_reset_align_val(cfiep); -+ } -+ /* Otherwise (wValue == 0), reset all features of all EP's */ -+ else { -+ /* Traverse all the active EP's and reset the feature(s) value(s) */ -+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) { -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ retval = cfi_reset_align_val(cfiep); -+ if (retval < 0) { -+ CFI_INFO -+ ("%s: Error resetting the feature Aliignment Value\n", -+ __func__); -+ return retval; -+ } -+ } -+ } -+ return retval; -+ -+} -+ -+static int cfi_preproc_reset(struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = 0; -+ -+ switch (req->wIndex) { -+ case 0: -+ /* Reset all features */ -+ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_DMA_BUFFER_SETUP: -+ /* Reset the SG buffer setup */ -+ retval = -+ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_DMA_CONCAT_SETUP: -+ /* Reset the Concatenation buffer setup */ -+ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_DMA_BUFF_ALIGN: -+ /* Reset the Alignment buffer setup */ -+ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff); -+ break; -+ -+ case FT_ID_TX_FIFO_DEPTH: -+ retval = -+ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1); -+ pcd->cfi->need_gadget_att = 0; -+ break; -+ -+ case FT_ID_RX_FIFO_DEPTH: -+ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0); -+ pcd->cfi->need_gadget_att = 0; -+ break; -+ default: -+ break; -+ } -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the SG buffer setup. -+ */ -+static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd) -+{ -+ uint8_t inaddr, outaddr; -+ cfi_ep_t *epin, *epout; -+ ddma_sg_buffer_setup_t *psgval; -+ uint32_t desccount, size; -+ -+ CFI_INFO("%s\n", __func__); -+ -+ psgval = (ddma_sg_buffer_setup_t *) buf; -+ desccount = (uint32_t) psgval->bCount; -+ size = (uint32_t) psgval->wSize; -+ -+ /* Check the DMA descriptor count */ -+ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) { -+ CFI_INFO -+ ("%s: The count of DMA Descriptors should be between 1 and %d\n", -+ __func__, MAX_DMA_DESCS_PER_EP); -+ return -DWC_E_INVALID; -+ } -+ -+ /* Check the DMA descriptor count */ -+ -+ if (size == 0) { -+ -+ CFI_INFO("%s: The transfer size should be at least 1 byte\n", -+ __func__); -+ -+ return -DWC_E_INVALID; -+ -+ } -+ -+ inaddr = psgval->bInEndpointAddress; -+ outaddr = psgval->bOutEndpointAddress; -+ -+ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr); -+ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr); -+ -+ if (NULL == epin || NULL == epout) { -+ CFI_INFO -+ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n", -+ __func__, inaddr, outaddr); -+ return -DWC_E_INVALID; -+ } -+ -+ epin->ep->dwc_ep.buff_mode = BM_SG; -+ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); -+ -+ epout->ep->dwc_ep.buff_mode = BM_SG; -+ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t)); -+ -+ return 0; -+} -+ -+/** -+ * This function sets a new value for the buffer Alignment setup. -+ */ -+static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd) -+{ -+ cfi_ep_t *ep; -+ uint8_t addr; -+ ddma_align_buffer_setup_t *palignval; -+ -+ palignval = (ddma_align_buffer_setup_t *) buf; -+ addr = palignval->bEndpointAddress; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ -+ ep->ep->dwc_ep.buff_mode = BM_ALIGN; -+ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t)); -+ -+ return 0; -+} -+ -+/** -+ * This function sets a new value for the Concatenation buffer setup. -+ */ -+static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd) -+{ -+ uint8_t addr; -+ cfi_ep_t *ep; -+ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr; -+ uint16_t *pVals; -+ uint32_t desccount; -+ int i; -+ uint16_t mps; -+ -+ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf; -+ desccount = (uint32_t) pConcatValHdr->bDescCount; -+ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN); -+ -+ /* Check the DMA descriptor count */ -+ if (desccount > MAX_DMA_DESCS_PER_EP) { -+ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n", -+ __func__, MAX_DMA_DESCS_PER_EP); -+ return -DWC_E_INVALID; -+ } -+ -+ addr = pConcatValHdr->bEndpointAddress; -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, addr); -+ return -DWC_E_INVALID; -+ } -+ -+ mps = UGETW(ep->ep->desc->wMaxPacketSize); -+ -+#if 0 -+ for (i = 0; i < desccount; i++) { -+ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]); -+ } -+ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps); -+#endif -+ -+ /* Check the wTxSizes to be less than or equal to the mps */ -+ for (i = 0; i < desccount; i++) { -+ if (pVals[i] > mps) { -+ CFI_INFO -+ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n", -+ __func__, i, pVals[i]); -+ return -DWC_E_INVALID; -+ } -+ } -+ -+ ep->ep->dwc_ep.buff_mode = BM_CONCAT; -+ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN); -+ -+ /* Free the previously allocated storage for the wTxBytes */ -+ if (ep->bm_concat->wTxBytes) { -+ DWC_FREE(ep->bm_concat->wTxBytes); -+ } -+ -+ /* Allocate a new storage for the wTxBytes field */ -+ ep->bm_concat->wTxBytes = -+ DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount); -+ if (NULL == ep->bm_concat->wTxBytes) { -+ CFI_INFO("%s: Unable to allocate memory\n", __func__); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Copy the new values into the wTxBytes filed */ -+ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN, -+ sizeof(uint16_t) * pConcatValHdr->bDescCount); -+ -+ return 0; -+} -+ -+/** -+ * This function calculates the total of all FIFO sizes -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return The total of data FIFO sizes. -+ * -+ */ -+static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_params_t *params = core_if->core_params; -+ uint16_t dfifo_total = 0; -+ int i; -+ -+ /* The shared RxFIFO size */ -+ dfifo_total = -+ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; -+ -+ /* Add up each TxFIFO size to the total */ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ dfifo_total += params->dev_tx_fifo_size[i]; -+ } -+ -+ return dfifo_total; -+} -+ -+/** -+ * This function returns Rx FIFO size -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return The total of data FIFO sizes. -+ * -+ */ -+static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue) -+{ -+ switch (wValue >> 8) { -+ case 0: -+ return (core_if->pwron_rxfsiz < -+ 32768) ? core_if->pwron_rxfsiz : 32768; -+ break; -+ case 1: -+ return core_if->core_params->dev_rx_fifo_size; -+ break; -+ default: -+ return -DWC_E_INVALID; -+ break; -+ } -+} -+ -+/** -+ * This function returns Tx FIFO size for IN EP -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return The total of data FIFO sizes. -+ * -+ */ -+static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ -+ ep = get_ep_by_addr(pcd, wValue & 0xff); -+ -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, wValue & 0xff); -+ return -DWC_E_INVALID; -+ } -+ -+ if (!ep->dwc_ep.is_in) { -+ CFI_INFO -+ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n", -+ __func__, wValue & 0xff); -+ return -DWC_E_INVALID; -+ } -+ -+ switch (wValue >> 8) { -+ case 0: -+ return (GET_CORE_IF(pcd)->pwron_txfsiz -+ [ep->dwc_ep.tx_fifo_num - 1] < -+ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep-> -+ dwc_ep.tx_fifo_num -+ - 1] : 32768; -+ break; -+ case 1: -+ return GET_CORE_IF(pcd)->core_params-> -+ dev_tx_fifo_size[ep->dwc_ep.num - 1]; -+ break; -+ default: -+ return -DWC_E_INVALID; -+ break; -+ } -+} -+ -+/** -+ * This function checks if the submitted combination of -+ * device mode FIFO sizes is possible or not. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return 1 if possible, 0 otherwise. -+ * -+ */ -+static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if) -+{ -+ uint16_t dfifo_actual = 0; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ uint16_t start_addr = 0; -+ int i; -+ -+ dfifo_actual = -+ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ dfifo_actual += params->dev_tx_fifo_size[i]; -+ } -+ -+ if (dfifo_actual > core_if->total_fifo_size) { -+ return 0; -+ } -+ -+ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16) -+ return 0; -+ -+ if (params->dev_nperio_tx_fifo_size > 32768 -+ || params->dev_nperio_tx_fifo_size < 16) -+ return 0; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ -+ if (params->dev_tx_fifo_size[i] > 768 -+ || params->dev_tx_fifo_size[i] < 4) -+ return 0; -+ } -+ -+ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz) -+ return 0; -+ start_addr = params->dev_rx_fifo_size; -+ -+ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz) -+ return 0; -+ start_addr += params->dev_nperio_tx_fifo_size; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ -+ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i]) -+ return 0; -+ start_addr += params->dev_tx_fifo_size[i]; -+ } -+ -+ return 1; -+} -+ -+/** -+ * This function resizes Device mode FIFOs -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ * @return 1 if successful, 0 otherwise -+ * -+ */ -+static uint8_t resize_fifos(dwc_otg_core_if_t * core_if) -+{ -+ int i = 0; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ uint32_t rx_fifo_size; -+ fifosize_data_t nptxfifosize; -+ fifosize_data_t txfifosize[15]; -+ -+ uint32_t rx_fsz_bak; -+ uint32_t nptxfsz_bak; -+ uint32_t txfsz_bak[15]; -+ -+ uint16_t start_address; -+ uint8_t retval = 1; -+ -+ if (!check_fifo_sizes(core_if)) { -+ return 0; -+ } -+ -+ /* Configure data FIFO sizes */ -+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { -+ rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz); -+ rx_fifo_size = params->dev_rx_fifo_size; -+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); -+ -+ /* -+ * Tx FIFOs These FIFOs are numbered from 1 to 15. -+ * Indexes of the FIFO size module parameters in the -+ * dev_tx_fifo_size array and the FIFO size registers in -+ * the dtxfsiz array run from 0 to 14. -+ */ -+ -+ /* Non-periodic Tx FIFO */ -+ nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz); -+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; -+ start_address = params->dev_rx_fifo_size; -+ nptxfifosize.b.startaddr = start_address; -+ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); -+ -+ start_address += nptxfifosize.b.depth; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]); -+ -+ txfifosize[i].b.depth = params->dev_tx_fifo_size[i]; -+ txfifosize[i].b.startaddr = start_address; -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ txfifosize[i].d32); -+ -+ start_address += txfifosize[i].b.depth; -+ } -+ -+ /** Check if register values are set correctly */ -+ if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) { -+ retval = 0; -+ } -+ -+ if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) { -+ retval = 0; -+ } -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ if (txfifosize[i].d32 != -+ DWC_READ_REG32(&global_regs->dtxfsiz[i])) { -+ retval = 0; -+ } -+ } -+ -+ /** If register values are not set correctly, reset old values */ -+ if (retval == 0) { -+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak); -+ -+ /* Non-periodic Tx FIFO */ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak); -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ txfsz_bak[i]); -+ } -+ } -+ } else { -+ return 0; -+ } -+ -+ /* Flush the FIFOs */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ -+ dwc_otg_flush_rx_fifo(core_if); -+ -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the buffer Alignment setup. -+ */ -+static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) -+{ -+ int retval; -+ uint32_t fsiz; -+ uint16_t size; -+ uint16_t ep_addr; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; -+ tx_fifo_size_setup_t *ptxfifoval; -+ -+ ptxfifoval = (tx_fifo_size_setup_t *) buf; -+ ep_addr = ptxfifoval->bEndpointAddress; -+ size = ptxfifoval->wDepth; -+ -+ ep = get_ep_by_addr(pcd, ep_addr); -+ -+ CFI_INFO -+ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n", -+ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num); -+ -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n", -+ __func__, ep_addr); -+ return -DWC_E_INVALID; -+ } -+ -+ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1]; -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size; -+ -+ if (resize_fifos(GET_CORE_IF(pcd))) { -+ retval = 0; -+ } else { -+ CFI_INFO -+ ("%s: Error setting the feature Tx FIFO Size for EP%d\n", -+ __func__, ep_addr); -+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz; -+ retval = -DWC_E_INVALID; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the buffer Alignment setup. -+ */ -+static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd) -+{ -+ int retval; -+ uint32_t fsiz; -+ uint16_t size; -+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params; -+ rx_fifo_size_setup_t *prxfifoval; -+ -+ prxfifoval = (rx_fifo_size_setup_t *) buf; -+ size = prxfifoval->wDepth; -+ -+ fsiz = params->dev_rx_fifo_size; -+ params->dev_rx_fifo_size = size; -+ -+ if (resize_fifos(GET_CORE_IF(pcd))) { -+ retval = 0; -+ } else { -+ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n", -+ __func__); -+ params->dev_rx_fifo_size = fsiz; -+ retval = -DWC_E_INVALID; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function reads the SG of an EP's buffer setup into the buffer buf -+ */ -+static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = -DWC_E_INVALID; -+ uint8_t addr; -+ cfi_ep_t *ep; -+ -+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ -+ addr = req->wValue & 0xFF; -+ if (addr == 0) /* The address should be non-zero */ -+ return retval; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", -+ __func__, addr); -+ return retval; -+ } -+ -+ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN); -+ retval = BS_SG_VAL_DESC_LEN; -+ return retval; -+} -+ -+/** -+ * This function reads the Concatenation value of an EP's buffer mode into -+ * the buffer buf -+ */ -+static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = -DWC_E_INVALID; -+ uint8_t addr; -+ cfi_ep_t *ep; -+ uint8_t desc_count; -+ -+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ -+ addr = req->wValue & 0xFF; -+ if (addr == 0) /* The address should be non-zero */ -+ return retval; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", -+ __func__, addr); -+ return retval; -+ } -+ -+ /* Copy the header to the buffer */ -+ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN); -+ /* Advance the buffer pointer by the header size */ -+ buf += BS_CONCAT_VAL_HDR_LEN; -+ -+ desc_count = ep->bm_concat->hdr.bDescCount; -+ /* Copy alll the wTxBytes to the buffer */ -+ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count); -+ -+ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count; -+ return retval; -+} -+ -+/** -+ * This function reads the buffer Alignment value of an EP's buffer mode into -+ * the buffer buf -+ * -+ * @return The total number of bytes copied to the buffer or negative error code. -+ */ -+static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd, -+ struct cfi_usb_ctrlrequest *req) -+{ -+ int retval = -DWC_E_INVALID; -+ uint8_t addr; -+ cfi_ep_t *ep; -+ -+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */ -+ addr = req->wValue & 0xFF; -+ if (addr == 0) /* The address should be non-zero */ -+ return retval; -+ -+ ep = get_cfi_ep_by_addr(pcd->cfi, addr); -+ if (NULL == ep) { -+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n", -+ __func__, addr); -+ return retval; -+ } -+ -+ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN); -+ retval = BS_ALIGN_VAL_HDR_LEN; -+ -+ return retval; -+} -+ -+/** -+ * This function sets a new value for the specified feature -+ * -+ * @param pcd A pointer to the PCD object -+ * -+ * @return 0 if successful, negative error code otherwise to stall the DCE. -+ */ -+static int cfi_set_feature_value(struct dwc_otg_pcd *pcd) -+{ -+ int retval = -DWC_E_NOT_SUPPORTED; -+ uint16_t wIndex, wValue; -+ uint8_t bRequest; -+ struct dwc_otg_core_if *coreif; -+ cfiobject_t *cfi = pcd->cfi; -+ struct cfi_usb_ctrlrequest *ctrl_req; -+ uint8_t *buf; -+ ctrl_req = &cfi->ctrl_req; -+ -+ buf = pcd->cfi->ctrl_req.data; -+ -+ coreif = GET_CORE_IF(pcd); -+ bRequest = ctrl_req->bRequest; -+ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex); -+ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue); -+ -+ /* See which feature is to be modified */ -+ switch (wIndex) { -+ case FT_ID_DMA_BUFFER_SETUP: -+ /* Modify the feature */ -+ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0) -+ return retval; -+ -+ /* And send this request to the gadget */ -+ cfi->need_gadget_att = 1; -+ break; -+ -+ case FT_ID_DMA_BUFF_ALIGN: -+ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 1; -+ break; -+ -+ case FT_ID_DMA_CONCAT_SETUP: -+ /* Modify the feature */ -+ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 1; -+ break; -+ -+ case FT_ID_DMA_CIRCULAR: -+ CFI_INFO("FT_ID_DMA_CIRCULAR\n"); -+ break; -+ -+ case FT_ID_THRESHOLD_SETUP: -+ CFI_INFO("FT_ID_THRESHOLD_SETUP\n"); -+ break; -+ -+ case FT_ID_DFIFO_DEPTH: -+ CFI_INFO("FT_ID_DFIFO_DEPTH\n"); -+ break; -+ -+ case FT_ID_TX_FIFO_DEPTH: -+ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n"); -+ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 0; -+ break; -+ -+ case FT_ID_RX_FIFO_DEPTH: -+ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n"); -+ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0) -+ return retval; -+ cfi->need_gadget_att = 0; -+ break; -+ } -+ -+ return retval; -+} -+ -+#endif //DWC_UTE_CFI ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h -@@ -0,0 +1,320 @@ -+/* ========================================================================== -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_OTG_CFI_H__) -+#define __DWC_OTG_CFI_H__ -+ -+#include "dwc_otg_pcd.h" -+#include "dwc_cfi_common.h" -+ -+/** -+ * @file -+ * This file contains the CFI related OTG PCD specific common constants, -+ * interfaces(functions and macros) and data structures.The CFI Protocol is an -+ * optional interface for internal testing purposes that a DUT may implement to -+ * support testing of configurable features. -+ * -+ */ -+ -+struct dwc_otg_pcd; -+struct dwc_otg_pcd_ep; -+ -+/** OTG CFI Features (properties) ID constants */ -+/** This is a request for all Core Features */ -+#define FT_ID_DMA_MODE 0x0001 -+#define FT_ID_DMA_BUFFER_SETUP 0x0002 -+#define FT_ID_DMA_BUFF_ALIGN 0x0003 -+#define FT_ID_DMA_CONCAT_SETUP 0x0004 -+#define FT_ID_DMA_CIRCULAR 0x0005 -+#define FT_ID_THRESHOLD_SETUP 0x0006 -+#define FT_ID_DFIFO_DEPTH 0x0007 -+#define FT_ID_TX_FIFO_DEPTH 0x0008 -+#define FT_ID_RX_FIFO_DEPTH 0x0009 -+ -+/**********************************************************/ -+#define CFI_INFO_DEF -+ -+#ifdef CFI_INFO_DEF -+#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt); -+#else -+#define CFI_INFO(fmt...) -+#endif -+ -+#define min(x,y) ({ \ -+ x < y ? x : y; }) -+ -+#define max(x,y) ({ \ -+ x > y ? x : y; }) -+ -+/** -+ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is -+ * also used for setting up a buffer for Circular DDMA. -+ */ -+struct _ddma_sg_buffer_setup { -+#define BS_SG_VAL_DESC_LEN 6 -+ /* The OUT EP address */ -+ uint8_t bOutEndpointAddress; -+ /* The IN EP address */ -+ uint8_t bInEndpointAddress; -+ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */ -+ uint8_t bOffset; -+ /* The number of transfer segments (a DMA descriptors per each segment) */ -+ uint8_t bCount; -+ /* Size (in byte) of each transfer segment */ -+ uint16_t wSize; -+} __attribute__ ((packed)); -+typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t; -+ -+/** Descriptor DMA Concatenation Buffer setup structure */ -+struct _ddma_concat_buffer_setup_hdr { -+#define BS_CONCAT_VAL_HDR_LEN 4 -+ /* The endpoint for which the buffer is to be set up */ -+ uint8_t bEndpointAddress; -+ /* The count of descriptors to be used */ -+ uint8_t bDescCount; -+ /* The total size of the transfer */ -+ uint16_t wSize; -+} __attribute__ ((packed)); -+typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t; -+ -+/** Descriptor DMA Concatenation Buffer setup structure */ -+struct _ddma_concat_buffer_setup { -+ /* The SG header */ -+ ddma_concat_buffer_setup_hdr_t hdr; -+ -+ /* The XFER sizes pointer (allocated dynamically) */ -+ uint16_t *wTxBytes; -+} __attribute__ ((packed)); -+typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t; -+ -+/** Descriptor DMA Alignment Buffer setup structure */ -+struct _ddma_align_buffer_setup { -+#define BS_ALIGN_VAL_HDR_LEN 2 -+ uint8_t bEndpointAddress; -+ uint8_t bAlign; -+} __attribute__ ((packed)); -+typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t; -+ -+/** Transmit FIFO Size setup structure */ -+struct _tx_fifo_size_setup { -+ uint8_t bEndpointAddress; -+ uint16_t wDepth; -+} __attribute__ ((packed)); -+typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t; -+ -+/** Transmit FIFO Size setup structure */ -+struct _rx_fifo_size_setup { -+ uint16_t wDepth; -+} __attribute__ ((packed)); -+typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t; -+ -+/** -+ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest -+ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer -+ * to the data returned in the data stage of a 3-stage Control Write requests. -+ */ -+struct cfi_usb_ctrlrequest { -+ uint8_t bRequestType; -+ uint8_t bRequest; -+ uint16_t wValue; -+ uint16_t wIndex; -+ uint16_t wLength; -+ uint8_t *data; -+} UPACKED; -+ -+/*---------------------------------------------------------------------------*/ -+ -+/** -+ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures. -+ * This structure is used to store the buffer setup data for any -+ * enabled endpoint in the PCD. -+ */ -+struct cfi_ep { -+ /* Entry for the list container */ -+ dwc_list_link_t lh; -+ /* Pointer to the active PCD endpoint structure */ -+ struct dwc_otg_pcd_ep *ep; -+ /* The last descriptor in the chain of DMA descriptors of the endpoint */ -+ struct dwc_otg_dma_desc *dma_desc_last; -+ /* The SG feature value */ -+ ddma_sg_buffer_setup_t *bm_sg; -+ /* The Circular feature value */ -+ ddma_sg_buffer_setup_t *bm_circ; -+ /* The Concatenation feature value */ -+ ddma_concat_buffer_setup_t *bm_concat; -+ /* The Alignment feature value */ -+ ddma_align_buffer_setup_t *bm_align; -+ /* XFER length */ -+ uint32_t xfer_len; -+ /* -+ * Count of DMA descriptors currently used. -+ * The total should not exceed the MAX_DMA_DESCS_PER_EP value -+ * defined in the dwc_otg_cil.h -+ */ -+ uint32_t desc_count; -+}; -+typedef struct cfi_ep cfi_ep_t; -+ -+typedef struct cfi_dma_buff { -+#define CFI_IN_BUF_LEN 1024 -+#define CFI_OUT_BUF_LEN 1024 -+ dma_addr_t addr; -+ uint8_t *buf; -+} cfi_dma_buff_t; -+ -+struct cfiobject; -+ -+/** -+ * This is the interface for the CFI operations. -+ * -+ * @param ep_enable Called when any endpoint is enabled and activated. -+ * @param release Called when the CFI object is released and it needs to correctly -+ * deallocate the dynamic memory -+ * @param ctrl_write_complete Called when the data stage of the request is complete -+ */ -+typedef struct cfi_ops { -+ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, -+ struct dwc_otg_pcd_ep * ep); -+ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd, -+ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma, -+ unsigned size, gfp_t flags); -+ void (*release) (struct cfiobject * cfi); -+ int (*ctrl_write_complete) (struct cfiobject * cfi, -+ struct dwc_otg_pcd * pcd); -+ void (*build_descriptors) (struct cfiobject * cfi, -+ struct dwc_otg_pcd * pcd, -+ struct dwc_otg_pcd_ep * ep, -+ dwc_otg_pcd_request_t * req); -+} cfi_ops_t; -+ -+struct cfiobject { -+ cfi_ops_t ops; -+ struct dwc_otg_pcd *pcd; -+ struct usb_gadget *gadget; -+ -+ /* Buffers used to send/receive CFI-related request data */ -+ cfi_dma_buff_t buf_in; -+ cfi_dma_buff_t buf_out; -+ -+ /* CFI specific Control request wrapper */ -+ struct cfi_usb_ctrlrequest ctrl_req; -+ -+ /* The list of active EP's in the PCD of type cfi_ep_t */ -+ dwc_list_link_t active_eps; -+ -+ /* This flag shall control the propagation of a specific request -+ * to the gadget's processing routines. -+ * 0 - no gadget handling -+ * 1 - the gadget needs to know about this request (w/o completing a status -+ * phase - just return a 0 to the _setup callback) -+ */ -+ uint8_t need_gadget_att; -+ -+ /* Flag indicating whether the status IN phase needs to be -+ * completed by the PCD -+ */ -+ uint8_t need_status_in_complete; -+}; -+typedef struct cfiobject cfiobject_t; -+ -+#define DUMP_MSG -+ -+#if defined(DUMP_MSG) -+static inline void dump_msg(const u8 * buf, unsigned int length) -+{ -+ unsigned int start, num, i; -+ char line[52], *p; -+ -+ if (length >= 512) -+ return; -+ -+ start = 0; -+ while (length > 0) { -+ num = min(length, 16u); -+ p = line; -+ for (i = 0; i < num; ++i) { -+ if (i == 8) -+ *p++ = ' '; -+ DWC_SPRINTF(p, " %02x", buf[i]); -+ p += 3; -+ } -+ *p = 0; -+ DWC_DEBUG("%6x: %s\n", start, line); -+ buf += num; -+ start += num; -+ length -= num; -+ } -+} -+#else -+static inline void dump_msg(const u8 * buf, unsigned int length) -+{ -+} -+#endif -+ -+/** -+ * This function returns a pointer to cfi_ep_t object with the addr address. -+ */ -+static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi, -+ uint8_t addr) -+{ -+ struct cfi_ep *pcfiep; -+ dwc_list_link_t *tmp; -+ -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ -+ if (pcfiep->ep->desc->bEndpointAddress == addr) { -+ return pcfiep; -+ } -+ } -+ -+ return NULL; -+} -+ -+/** -+ * This function returns a pointer to cfi_ep_t object that matches -+ * the dwc_otg_pcd_ep object. -+ */ -+static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi, -+ struct dwc_otg_pcd_ep *ep) -+{ -+ struct cfi_ep *pcfiep = NULL; -+ dwc_list_link_t *tmp; -+ -+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) { -+ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh); -+ if (pcfiep->ep == ep) { -+ return pcfiep; -+ } -+ } -+ return NULL; -+} -+ -+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl); -+ -+#endif /* (__DWC_OTG_CFI_H__) */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c -@@ -0,0 +1,7141 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ -+ * $Revision: #191 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * The Core Interface Layer provides basic services for accessing and -+ * managing the DWC_otg hardware. These services are used by both the -+ * Host Controller Driver and the Peripheral Controller Driver. -+ * -+ * The CIL manages the memory map for the core so that the HCD and PCD -+ * don't have to do this separately. It also handles basic tasks like -+ * reading/writing the registers and data FIFOs in the controller. -+ * Some of the data access functions provide encapsulation of several -+ * operations required to perform a task, such as writing multiple -+ * registers to start a transfer. Finally, the CIL performs basic -+ * services that are not specific to either the host or device modes -+ * of operation. These services include management of the OTG Host -+ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A -+ * Diagnostic API is also provided to allow testing of the controller -+ * hardware. -+ * -+ * The Core Interface Layer has the following requirements: -+ * - Provides basic controller operations. -+ * - Minimal use of OS services. -+ * - The OS services used will be abstracted by using inline functions -+ * or macros. -+ * -+ */ -+ -+#include "dwc_os.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+ -+static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if); -+ -+/** -+ * This function is called to initialize the DWC_otg CSR data -+ * structures. The register addresses in the device and host -+ * structures are initialized from the base address supplied by the -+ * caller. The calling function must make the OS calls to get the -+ * base address of the DWC_otg controller registers. The core_params -+ * argument holds the parameters that specify how the core should be -+ * configured. -+ * -+ * @param reg_base_addr Base address of DWC_otg core registers -+ * -+ */ -+dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr) -+{ -+ dwc_otg_core_if_t *core_if = 0; -+ dwc_otg_dev_if_t *dev_if = 0; -+ dwc_otg_host_if_t *host_if = 0; -+ uint8_t *reg_base = (uint8_t *) reg_base_addr; -+ int i = 0; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr); -+ -+ core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t)); -+ -+ if (core_if == NULL) { -+ DWC_DEBUGPL(DBG_CIL, -+ "Allocation of dwc_otg_core_if_t failed\n"); -+ return 0; -+ } -+ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base; -+ -+ /* -+ * Allocate the Device Mode structures. -+ */ -+ dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t)); -+ -+ if (dev_if == NULL) { -+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ dev_if->dev_global_regs = -+ (dwc_otg_device_global_regs_t *) (reg_base + -+ DWC_DEV_GLOBAL_REG_OFFSET); -+ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) -+ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + -+ (i * DWC_EP_REG_OFFSET)); -+ -+ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) -+ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + -+ (i * DWC_EP_REG_OFFSET)); -+ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", -+ i, &dev_if->in_ep_regs[i]->diepctl); -+ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", -+ i, &dev_if->out_ep_regs[i]->doepctl); -+ } -+ -+ dev_if->speed = 0; // unknown -+ -+ core_if->dev_if = dev_if; -+ -+ /* -+ * Allocate the Host Mode structures. -+ */ -+ host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t)); -+ -+ if (host_if == NULL) { -+ DWC_DEBUGPL(DBG_CIL, -+ "Allocation of dwc_otg_host_if_t failed\n"); -+ DWC_FREE(dev_if); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) -+ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); -+ -+ host_if->hprt0 = -+ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); -+ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) -+ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + -+ (i * DWC_OTG_CHAN_REGS_OFFSET)); -+ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", -+ i, &host_if->hc_regs[i]->hcchar); -+ } -+ -+ host_if->num_host_channels = MAX_EPS_CHANNELS; -+ core_if->host_if = host_if; -+ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ core_if->data_fifo[i] = -+ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET + -+ (i * DWC_OTG_DATA_FIFO_SIZE)); -+ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n", -+ i, (unsigned long)core_if->data_fifo[i]); -+ } -+ -+ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET); -+ -+ /* Initiate lx_state to L3 disconnected state */ -+ core_if->lx_state = DWC_OTG_L3; -+ /* -+ * Store the contents of the hardware configuration registers here for -+ * easy access later. -+ */ -+ core_if->hwcfg1.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1); -+ core_if->hwcfg2.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); -+ core_if->hwcfg3.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3); -+ core_if->hwcfg4.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); -+ -+ /* Force host mode to get HPTXFSIZ exact power on value */ -+ { -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ gusbcfg.b.force_host_mode = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); -+ dwc_mdelay(100); -+ core_if->hptxfsiz.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); -+ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ gusbcfg.b.force_host_mode = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); -+ dwc_mdelay(100); -+ } -+ -+ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32); -+ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32); -+ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32); -+ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32); -+ -+ core_if->hcfg.d32 = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ core_if->dcfg.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ -+ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32); -+ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode); -+ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture); -+ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep); -+ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n", -+ core_if->hwcfg2.b.num_host_chan); -+ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n", -+ core_if->hwcfg2.b.nonperio_tx_q_depth); -+ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n", -+ core_if->hwcfg2.b.host_perio_tx_q_depth); -+ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n", -+ core_if->hwcfg2.b.dev_token_q_depth); -+ -+ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n", -+ core_if->hwcfg3.b.dfifo_depth); -+ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n", -+ core_if->hwcfg3.b.xfer_size_cntr_width); -+ -+ /* -+ * Set the SRP sucess bit for FS-I2c -+ */ -+ core_if->srp_success = 0; -+ core_if->srp_timer_started = 0; -+ -+ /* -+ * Create new workqueue and init works -+ */ -+ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg"); -+ if (core_if->wq_otg == 0) { -+ DWC_WARN("DWC_WORKQ_ALLOC failed\n"); -+ DWC_FREE(host_if); -+ DWC_FREE(dev_if); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid); -+ -+ DWC_PRINTF("Core Release: %x.%x%x%x\n", -+ (core_if->snpsid >> 12 & 0xF), -+ (core_if->snpsid >> 8 & 0xF), -+ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF)); -+ -+ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer", -+ w_wakeup_detected, core_if); -+ if (core_if->wkp_timer == 0) { -+ DWC_WARN("DWC_TIMER_ALLOC failed\n"); -+ DWC_FREE(host_if); -+ DWC_FREE(dev_if); -+ DWC_WORKQ_FREE(core_if->wq_otg); -+ DWC_FREE(core_if); -+ return 0; -+ } -+ -+ if (dwc_otg_setup_params(core_if)) { -+ DWC_WARN("Error while setting core params\n"); -+ } -+ -+ core_if->hibernation_suspend = 0; -+ -+ /** ADP initialization */ -+ dwc_otg_adp_init(core_if); -+ -+ return core_if; -+} -+ -+/** -+ * This function frees the structures allocated by dwc_otg_cil_init(). -+ * -+ * @param core_if The core interface pointer returned from -+ * dwc_otg_cil_init(). -+ * -+ */ -+void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if) -+{ -+ dctl_data_t dctl = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); -+ -+ /* Disable all interrupts */ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0); -+ -+ dctl.b.sftdiscon = 1; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, -+ dctl.d32); -+ } -+ -+ if (core_if->wq_otg) { -+ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500); -+ DWC_WORKQ_FREE(core_if->wq_otg); -+ } -+ if (core_if->dev_if) { -+ DWC_FREE(core_if->dev_if); -+ } -+ if (core_if->host_if) { -+ DWC_FREE(core_if->host_if); -+ } -+ -+ /** Remove ADP Stuff */ -+ dwc_otg_adp_remove(core_if); -+ if (core_if->core_params) { -+ DWC_FREE(core_if->core_params); -+ } -+ if (core_if->wkp_timer) { -+ DWC_TIMER_FREE(core_if->wkp_timer); -+ } -+ if (core_if->srp_timer) { -+ DWC_TIMER_FREE(core_if->srp_timer); -+ } -+ DWC_FREE(core_if); -+} -+ -+/** -+ * This function enables the controller's Global Interrupt in the AHB Config -+ * register. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); -+} -+ -+/** -+ * This function disables the controller's Global Interrupt in the AHB Config -+ * register. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); -+} -+ -+/** -+ * This function initializes the commmon interrupts, used in both -+ * device and host modes. -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ * -+ */ -+static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ /* Clear any pending OTG Interrupts */ -+ DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF); -+ -+ /* Clear any pending interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* -+ * Enable the interrupts in the GINTMSK. -+ */ -+ intr_mask.b.modemismatch = 1; -+ intr_mask.b.otgintr = 1; -+ -+ if (!core_if->dma_enable) { -+ intr_mask.b.rxstsqlvl = 1; -+ } -+ -+ intr_mask.b.conidstschng = 1; -+ intr_mask.b.wkupintr = 1; -+ intr_mask.b.disconnect = 0; -+ intr_mask.b.usbsuspend = 1; -+ intr_mask.b.sessreqintr = 1; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (core_if->core_params->lpm_enable) { -+ intr_mask.b.lpmtranrcvd = 1; -+ } -+#endif -+ DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32); -+} -+ -+/* -+ * The restore operation is modified to support Synopsys Emulated Powerdown and -+ * Hibernation. This function is for exiting from Device mode hibernation by -+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. -+ * @param core_if Programming view of DWC_otg controller. -+ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. -+ * @param reset - indicates whether resume is initiated by Reset. -+ */ -+int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ -+ int timeout = 2000; -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__); -+ /* Switch-on voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Assert Restore signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ if (rem_wakeup) { -+ dwc_udelay(70); -+ } -+ -+ /* Deassert Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Mask interrupts from gpwrdn */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.connect_det_msk = 1; -+ gpwrdn.b.srp_det_msk = 1; -+ gpwrdn.b.disconn_det_msk = 1; -+ gpwrdn.b.rst_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Indicates that we are going out from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* -+ * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1 -+ * indicates restore from remote_wakeup -+ */ -+ restore_essential_regs(core_if, rem_wakeup, 0); -+ -+ /* -+ * Wait a little for seeing new value of variable hibernation_suspend if -+ * Restore done interrupt received before polling -+ */ -+ dwc_udelay(10); -+ -+ if (core_if->hibernation_suspend == 0) { -+ /* -+ * Wait For Restore_done Interrupt. This mechanism of polling the -+ * interrupt is introduced to avoid any possible race conditions -+ */ -+ do { -+ gintsts_data_t gintsts; -+ gintsts.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (gintsts.b.restoredone) { -+ gintsts.d32 = 0; -+ gintsts.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, gintsts.d32); -+ DWC_PRINTF("Restore Done Interrupt seen\n"); -+ break; -+ } -+ dwc_udelay(10); -+ } while (--timeout); -+ if (!timeout) { -+ DWC_PRINTF("Restore Done interrupt wasn't generated here\n"); -+ } -+ } -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* De-assert Restore */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ if (!rem_wakeup) { -+ pcgcctl.d32 = 0; -+ pcgcctl.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ } -+ -+ /* Restore GUSBCFG and DCFG */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, -+ core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, -+ core_if->dr_backup->dcfg); -+ -+ /* De-assert Wakeup Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ if (!rem_wakeup) { -+ /* Set Device programming done bit */ -+ dctl.b.pwronprgdone = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } else { -+ /* Start Remote Wakeup Signaling */ -+ dctl.d32 = core_if->dr_backup->dctl; -+ dctl.b.rmtwkupsig = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+ } -+ -+ dwc_mdelay(2); -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Restore global registers */ -+ dwc_otg_restore_global_regs(core_if); -+ /* Restore device global registers */ -+ dwc_otg_restore_dev_regs(core_if, rem_wakeup); -+ -+ if (rem_wakeup) { -+ dwc_mdelay(7); -+ dctl.d32 = 0; -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); -+ } -+ -+ core_if->hibernation_suspend = 0; -+ /* The core will be in ON STATE */ -+ core_if->lx_state = DWC_OTG_L0; -+ DWC_PRINTF("Hibernation recovery completes here\n"); -+ -+ return 1; -+} -+ -+/* -+ * The restore operation is modified to support Synopsys Emulated Powerdown and -+ * Hibernation. This function is for exiting from Host mode hibernation by -+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup. -+ * @param core_if Programming view of DWC_otg controller. -+ * @param rem_wakeup - indicates whether resume is initiated by Device or Host. -+ * @param reset - indicates whether resume is initiated by Reset. -+ */ -+int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ -+ int timeout = 2000; -+ -+ DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__); -+ /* Switch-on voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Assert Restore signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ if (!rem_wakeup) { -+ dwc_udelay(50); -+ } -+ -+ /* Deassert Reset core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.connect_det_msk = 1; -+ gpwrdn.b.srp_det_msk = 1; -+ gpwrdn.b.disconn_det_msk = 1; -+ gpwrdn.b.rst_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Indicates that we are going out from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Set Restore Essential Regs bit in PCGCCTL register */ -+ restore_essential_regs(core_if, rem_wakeup, 1); -+ -+ /* Wait a little for seeing new value of variable hibernation_suspend if -+ * Restore done interrupt received before polling */ -+ dwc_udelay(10); -+ -+ if (core_if->hibernation_suspend == 0) { -+ /* Wait For Restore_done Interrupt. This mechanism of polling the -+ * interrupt is introduced to avoid any possible race conditions -+ */ -+ do { -+ gintsts_data_t gintsts; -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (gintsts.b.restoredone) { -+ gintsts.d32 = 0; -+ gintsts.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n"); -+ break; -+ } -+ dwc_udelay(10); -+ } while (--timeout); -+ if (!timeout) { -+ DWC_WARN("Restore Done interrupt wasn't generated\n"); -+ } -+ } -+ -+ /* Set the flag's value to 0 again after receiving restore done interrupt */ -+ core_if->hibernation_suspend = 0; -+ -+ /* This step is not described in functional spec but if not wait for this -+ * delay, mismatch interrupts occurred because just after restore core is -+ * in Device mode(gintsts.curmode == 0) */ -+ dwc_mdelay(100); -+ -+ /* Clear all pending interrupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* De-assert Restore */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Restore GUSBCFG and HCFG */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, -+ core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, -+ core_if->hr_backup->hcfg_local); -+ -+ /* De-assert Wakeup Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Start the Resume operation by programming HPRT0 */ -+ hprt0.d32 = core_if->hr_backup->hprt0_local; -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtena = 0; -+ hprt0.b.prtsusp = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ DWC_PRINTF("Resume Starts Now\n"); -+ if (!reset) { // Indicates it is Resume Operation -+ hprt0.d32 = core_if->hr_backup->hprt0_local; -+ hprt0.b.prtres = 1; -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtena = 0; -+ hprt0.b.prtsusp = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ if (!rem_wakeup) -+ hprt0.b.prtres = 0; -+ /* Wait for Resume time and then program HPRT again */ -+ dwc_mdelay(100); -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ } else { // Indicates it is Reset Operation -+ hprt0.d32 = core_if->hr_backup->hprt0_local; -+ hprt0.b.prtrst = 1; -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtena = 0; -+ hprt0.b.prtsusp = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ /* Wait for Reset time and then program HPRT again */ -+ dwc_mdelay(60); -+ hprt0.b.prtrst = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ /* Clear all interrupt status */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtconndet = 1; -+ hprt0.b.prtenchng = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Restore global registers */ -+ dwc_otg_restore_global_regs(core_if); -+ /* Restore host global registers */ -+ dwc_otg_restore_host_regs(core_if, reset); -+ -+ /* The core will be in ON STATE */ -+ core_if->lx_state = DWC_OTG_L0; -+ DWC_PRINTF("Hibernation recovery is complete here\n"); -+ return 0; -+} -+ -+/** Saves some register values into system memory. */ -+int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ int i; -+ -+ gr = core_if->gr_backup; -+ if (!gr) { -+ gr = DWC_ALLOC(sizeof(*gr)); -+ if (!gr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->gr_backup = gr; -+ } -+ -+ gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); -+ gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); -+ gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+#endif -+ gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl); -+ gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl); -+ gr->gdfifocfg_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg); -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ gr->dtxfsiz_local[i] = -+ DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i])); -+ } -+ -+ DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n", -+ gr->gnptxfsiz_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n", -+ gr->hptxfsiz_local); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local); -+#endif -+ DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local); -+ DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local); -+ -+ return 0; -+} -+ -+/** Saves GINTMSK register before setting the msk bits. */ -+int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ -+ gr = core_if->gr_backup; -+ if (!gr) { -+ gr = DWC_ALLOC(sizeof(*gr)); -+ if (!gr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->gr_backup = gr; -+ } -+ -+ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ -+ DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local); -+ -+ return 0; -+} -+ -+int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_dev_regs_backup *dr; -+ int i; -+ -+ dr = core_if->dr_backup; -+ if (!dr) { -+ dr = DWC_ALLOC(sizeof(*dr)); -+ if (!dr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->dr_backup = dr; -+ } -+ -+ dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ dr->daintmsk = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); -+ dr->diepmsk = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk); -+ dr->doepmsk = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk); -+ -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ dr->diepctl[i] = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); -+ dr->dieptsiz[i] = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz); -+ dr->diepdma[i] = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma); -+ } -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "=============Backing Host registers==============\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg); -+ DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl); -+ DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n", -+ dr->daintmsk); -+ DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk); -+ DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk); -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i, -+ dr->diepctl[i]); -+ DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n", -+ i, dr->dieptsiz[i]); -+ DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i, -+ dr->diepdma[i]); -+ } -+ -+ return 0; -+} -+ -+int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_host_regs_backup *hr; -+ int i; -+ -+ hr = core_if->hr_backup; -+ if (!hr) { -+ hr = DWC_ALLOC(sizeof(*hr)); -+ if (!hr) { -+ return -DWC_E_NO_MEMORY; -+ } -+ core_if->hr_backup = hr; -+ } -+ -+ hr->hcfg_local = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ hr->haintmsk_local = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); -+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { -+ hr->hcintmsk_local[i] = -+ DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk); -+ } -+ hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0); -+ hr->hfir_local = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "=============Backing Host registers===============\n"); -+ DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n", -+ hr->hcfg_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local); -+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { -+ DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i, -+ hr->hcintmsk_local[i]); -+ } -+ DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n", -+ hr->hprt0_local); -+ DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n", -+ hr->hfir_local); -+ -+ return 0; -+} -+ -+int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ int i; -+ -+ gr = core_if->gr_backup; -+ if (!gr) { -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, -+ gr->gnptxfsiz_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz, -+ gr->hptxfsiz_local); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg, -+ gr->gdfifocfg_local); -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i], -+ gr->dtxfsiz_local[i]); -+ } -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, -+ (gr->gahbcfg_local)); -+ return 0; -+} -+ -+int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup) -+{ -+ struct dwc_otg_dev_regs_backup *dr; -+ int i; -+ -+ dr = core_if->dr_backup; -+ -+ if (!dr) { -+ return -DWC_E_INVALID; -+ } -+ -+ if (!rem_wakeup) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ dr->dctl); -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk); -+ -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]); -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]); -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]); -+ } -+ -+ return 0; -+} -+ -+int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset) -+{ -+ struct dwc_otg_host_regs_backup *hr; -+ int i; -+ hr = core_if->hr_backup; -+ -+ if (!hr) { -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local); -+ //if (!reset) -+ //{ -+ // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local); -+ //} -+ -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, -+ hr->haintmsk_local); -+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) { -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, -+ hr->hcintmsk_local[i]); -+ } -+ -+ return 0; -+} -+ -+int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ -+ gr = core_if->gr_backup; -+ -+ /* Restore values for LPM and I2C */ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local); -+#endif -+ DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local); -+ -+ return 0; -+} -+ -+int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host) -+{ -+ struct dwc_otg_global_regs_backup *gr; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gahbcfg_data_t gahbcfg = {.d32 = 0 }; -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ /* Restore LPM and I2C registers */ -+ restore_lpm_i2c_regs(core_if); -+ -+ /* Set PCGCCTL to 0 */ -+ DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000); -+ -+ gr = core_if->gr_backup; -+ /* Load restore values for [31:14] bits */ -+ DWC_WRITE_REG32(core_if->pcgcctl, -+ ((gr->pcgcctl_local & 0xffffc000) | 0x00020000)); -+ -+ /* Umnask global Interrupt in GAHBCFG and restore it */ -+ gahbcfg.d32 = gr->gahbcfg_local; -+ gahbcfg.b.glblintrmsk = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); -+ -+ /* Clear all pending interupts */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Unmask restore done interrupt */ -+ gintmsk.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32); -+ -+ /* Restore GUSBCFG and HCFG/DCFG */ -+ gusbcfg.d32 = core_if->gr_backup->gusbcfg_local; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32); -+ -+ if (is_host) { -+ hcfg_data_t hcfg = {.d32 = 0 }; -+ hcfg.d32 = core_if->hr_backup->hcfg_local; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, -+ hcfg.d32); -+ -+ /* Load restore values for [31:14] bits */ -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; -+ -+ if (rmode) -+ pcgcctl.b.restoremode = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ /* Load restore values for [31:14] bits and set EssRegRestored bit */ -+ pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.b.ess_reg_restored = 1; -+ if (rmode) -+ pcgcctl.b.restoremode = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ } else { -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ dcfg.d32 = core_if->dr_backup->dcfg; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ /* Load restore values for [31:14] bits */ -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; -+ if (!rmode) { -+ pcgcctl.d32 |= 0x208; -+ } -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ /* Load restore values for [31:14] bits */ -+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000; -+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000; -+ pcgcctl.b.ess_reg_restored = 1; -+ if (!rmode) -+ pcgcctl.d32 |= 0x208; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ } -+ -+ return 0; -+} -+ -+/** -+ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY -+ * type. -+ */ -+static void init_fslspclksel(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t val; -+ hcfg_data_t hcfg; -+ -+ if (((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls)) || -+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { -+ /* Full speed PHY */ -+ val = DWC_HCFG_48_MHZ; -+ } else { -+ /* High speed PHY running at full speed or high speed */ -+ val = DWC_HCFG_30_60_MHZ; -+ } -+ -+ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); -+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ hcfg.b.fslspclksel = val; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+} -+ -+/** -+ * Initializes the DevSpd field of the DCFG register depending on the PHY type -+ * and the enumeration speed of the device. -+ */ -+static void init_devspd(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t val; -+ dcfg_data_t dcfg; -+ -+ if (((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls)) || -+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { -+ /* Full speed PHY */ -+ val = 0x3; -+ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { -+ /* High speed PHY running at full speed */ -+ val = 0x1; -+ } else { -+ /* High speed PHY running at high speed */ -+ val = 0x0; -+ } -+ -+ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); -+ -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.b.devspd = val; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); -+} -+ -+/** -+ * This function calculates the number of IN EPS -+ * using GHWCFG1 and GHWCFG2 registers values -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ */ -+static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t num_in_eps = 0; -+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; -+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; -+ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; -+ int i; -+ -+ for (i = 0; i < num_eps; ++i) { -+ if (!(hwcfg1 & 0x1)) -+ num_in_eps++; -+ -+ hwcfg1 >>= 2; -+ } -+ -+ if (core_if->hwcfg4.b.ded_fifo_en) { -+ num_in_eps = -+ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; -+ } -+ -+ return num_in_eps; -+} -+ -+/** -+ * This function calculates the number of OUT EPS -+ * using GHWCFG1 and GHWCFG2 registers values -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ */ -+static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t num_out_eps = 0; -+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; -+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; -+ int i; -+ -+ for (i = 0; i < num_eps; ++i) { -+ if (!(hwcfg1 & 0x1)) -+ num_out_eps++; -+ -+ hwcfg1 >>= 2; -+ } -+ return num_out_eps; -+} -+ -+/** -+ * This function initializes the DWC_otg controller registers and -+ * prepares the core for device mode or host mode operation. -+ * -+ * @param core_if Programming view of the DWC_otg controller -+ * -+ */ -+void dwc_otg_core_init(dwc_otg_core_if_t * core_if) -+{ -+ int i = 0; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ gahbcfg_data_t ahbcfg = {.d32 = 0 }; -+ gusbcfg_data_t usbcfg = {.d32 = 0 }; -+ gi2cctl_data_t i2cctl = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n", -+ core_if, global_regs); -+ -+ /* Common Initialization */ -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ -+ /* Program the ULPI External VBUS bit if needed */ -+ usbcfg.b.ulpi_ext_vbus_drv = -+ (core_if->core_params->phy_ulpi_ext_vbus == -+ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; -+ -+ /* Set external TS Dline pulsing */ -+ usbcfg.b.term_sel_dl_pulse = -+ (core_if->core_params->ts_dline == 1) ? 1 : 0; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+ /* Reset the Controller */ -+ dwc_otg_core_reset(core_if); -+ -+ core_if->adp_enable = core_if->core_params->adp_supp_enable; -+ core_if->power_down = core_if->core_params->power_down; -+ core_if->otg_sts = 0; -+ -+ /* Initialize parameters from Hardware configuration registers. */ -+ dev_if->num_in_eps = calc_num_in_eps(core_if); -+ dev_if->num_out_eps = calc_num_out_eps(core_if); -+ -+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", -+ core_if->hwcfg4.b.num_dev_perio_in_ep); -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { -+ dev_if->perio_tx_fifo_size[i] = -+ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; -+ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", -+ i, dev_if->perio_tx_fifo_size[i]); -+ } -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ dev_if->tx_fifo_size[i] = -+ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16; -+ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", -+ i, dev_if->tx_fifo_size[i]); -+ } -+ -+ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; -+ core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz); -+ core_if->nperio_tx_fifo_size = -+ DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16; -+ -+ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", -+ core_if->nperio_tx_fifo_size); -+ -+ /* This programming sequence needs to happen in FS mode before any other -+ * programming occurs */ -+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && -+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { -+ /* If FS mode with FS PHY */ -+ -+ /* core_init() is now called on every switch so only call the -+ * following for the first time through. */ -+ if (!core_if->phy_init_done) { -+ core_if->phy_init_done = 1; -+ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.physel = 1; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+ /* Reset after a PHY select */ -+ dwc_otg_core_reset(core_if); -+ } -+ -+ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also -+ * do this on HNP Dev/Host mode switches (done in dev_init and -+ * host_init). */ -+ if (dwc_otg_is_host_mode(core_if)) { -+ init_fslspclksel(core_if); -+ } else { -+ init_devspd(core_if); -+ } -+ -+ if (core_if->core_params->i2c_enable) { -+ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); -+ /* Program GUSBCFG.OtgUtmifsSel to I2C */ -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.otgutmifssel = 1; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+ /* Program GI2CCTL.I2CEn */ -+ i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl); -+ i2cctl.b.i2cdevaddr = 1; -+ i2cctl.b.i2cen = 0; -+ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); -+ i2cctl.b.i2cen = 1; -+ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32); -+ } -+ -+ } /* endif speed == DWC_SPEED_PARAM_FULL */ -+ else { -+ /* High speed PHY. */ -+ if (!core_if->phy_init_done) { -+ core_if->phy_init_done = 1; -+ /* HS PHY parameters. These parameters are preserved -+ * during soft reset so only program the first time. Do -+ * a soft reset immediately after setting phyif. */ -+ -+ if (core_if->core_params->phy_type == 2) { -+ /* ULPI interface */ -+ usbcfg.b.ulpi_utmi_sel = 1; -+ usbcfg.b.phyif = 0; -+ usbcfg.b.ddrsel = -+ core_if->core_params->phy_ulpi_ddr; -+ } else if (core_if->core_params->phy_type == 1) { -+ /* UTMI+ interface */ -+ usbcfg.b.ulpi_utmi_sel = 0; -+ if (core_if->core_params->phy_utmi_width == 16) { -+ usbcfg.b.phyif = 1; -+ -+ } else { -+ usbcfg.b.phyif = 0; -+ } -+ } else { -+ DWC_ERROR("FS PHY TYPE\n"); -+ } -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ /* Reset after setting the PHY parameters */ -+ dwc_otg_core_reset(core_if); -+ } -+ } -+ -+ if ((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls)) { -+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.ulpi_fsls = 1; -+ usbcfg.b.ulpi_clk_sus_m = 1; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ } else { -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ usbcfg.b.ulpi_fsls = 0; -+ usbcfg.b.ulpi_clk_sus_m = 0; -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ } -+ -+ /* Program the GAHBCFG Register. */ -+ switch (core_if->hwcfg2.b.architecture) { -+ -+ case DWC_SLAVE_ONLY_ARCH: -+ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); -+ ahbcfg.b.nptxfemplvl_txfemplvl = -+ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; -+ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; -+ core_if->dma_enable = 0; -+ core_if->dma_desc_enable = 0; -+ break; -+ -+ case DWC_EXT_DMA_ARCH: -+ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); -+ { -+ uint8_t brst_sz = core_if->core_params->dma_burst_size; -+ ahbcfg.b.hburstlen = 0; -+ while (brst_sz > 1) { -+ ahbcfg.b.hburstlen++; -+ brst_sz >>= 1; -+ } -+ } -+ core_if->dma_enable = (core_if->core_params->dma_enable != 0); -+ core_if->dma_desc_enable = -+ (core_if->core_params->dma_desc_enable != 0); -+ break; -+ -+ case DWC_INT_DMA_ARCH: -+ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); -+ /* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for -+ Host mode ISOC in issue fix - vahrama */ -+ /* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */ -+ ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4; -+ core_if->dma_enable = (core_if->core_params->dma_enable != 0); -+ core_if->dma_desc_enable = -+ (core_if->core_params->dma_desc_enable != 0); -+ break; -+ -+ } -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ DWC_PRINTF("Using Descriptor DMA mode\n"); -+ } else { -+ DWC_PRINTF("Using Buffer DMA mode\n"); -+ -+ } -+ } else { -+ DWC_PRINTF("Using Slave mode\n"); -+ core_if->dma_desc_enable = 0; -+ } -+ -+ if (core_if->core_params->ahb_single) { -+ ahbcfg.b.ahbsingle = 1; -+ } -+ -+ ahbcfg.b.dmaenable = core_if->dma_enable; -+ DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32); -+ -+ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; -+ -+ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; -+ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; -+ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n", -+ ((core_if->pti_enh_enable) ? "enabled" : "disabled")); -+ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n", -+ ((core_if->multiproc_int_enable) ? "enabled" : "disabled")); -+ -+ /* -+ * Program the GUSBCFG register. -+ */ -+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ -+ switch (core_if->hwcfg2.b.op_mode) { -+ case DWC_MODE_HNP_SRP_CAPABLE: -+ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == -+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_SRP_ONLY_CAPABLE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_NO_HNP_SRP_CAPABLE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = 0; -+ break; -+ -+ case DWC_MODE_SRP_CAPABLE_DEVICE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = 0; -+ break; -+ -+ case DWC_MODE_SRP_CAPABLE_HOST: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = (core_if->core_params->otg_cap != -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ break; -+ -+ case DWC_MODE_NO_SRP_CAPABLE_HOST: -+ usbcfg.b.hnpcap = 0; -+ usbcfg.b.srpcap = 0; -+ break; -+ } -+ -+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32); -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (core_if->core_params->lpm_enable) { -+ glpmcfg_data_t lpmcfg = {.d32 = 0 }; -+ -+ /* To enable LPM support set lpm_cap_en bit */ -+ lpmcfg.b.lpm_cap_en = 1; -+ -+ /* Make AppL1Res ACK */ -+ lpmcfg.b.appl_resp = 1; -+ -+ /* Retry 3 times */ -+ lpmcfg.b.retry_count = 3; -+ -+ DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg, -+ 0, lpmcfg.d32); -+ -+ } -+#endif -+ if (core_if->core_params->ic_usb_cap) { -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ gusbcfg.b.ic_usb_cap = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg, -+ 0, gusbcfg.d32); -+ } -+ { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gotgctl.b.otgver = core_if->core_params->otg_ver; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0, -+ gotgctl.d32); -+ /* Set OTG version supported */ -+ core_if->otg_ver = core_if->core_params->otg_ver; -+ DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n", -+ core_if->core_params->otg_ver, core_if->otg_ver); -+ } -+ -+ -+ /* Enable common interrupts */ -+ dwc_otg_enable_common_interrupts(core_if); -+ -+ /* Do device or host intialization based on mode during PCD -+ * and HCD initialization */ -+ if (dwc_otg_is_host_mode(core_if)) { -+ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); -+ core_if->op_state = A_HOST; -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); -+ core_if->op_state = B_PERIPHERAL; -+#ifdef DWC_DEVICE_ONLY -+ dwc_otg_core_dev_init(core_if); -+#endif -+ } -+} -+ -+/** -+ * This function enables the Device mode interrupts. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ -+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); -+ -+ /* Disable all interrupts. */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* Clear any pending interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Enable the common interrupts */ -+ dwc_otg_enable_common_interrupts(core_if); -+ -+ /* Enable interrupts */ -+ intr_mask.b.usbreset = 1; -+ intr_mask.b.enumdone = 1; -+ /* Disable Disconnect interrupt in Device mode */ -+ intr_mask.b.disconnect = 0; -+ -+ if (!core_if->multiproc_int_enable) { -+ intr_mask.b.inepintr = 1; -+ intr_mask.b.outepintr = 1; -+ } -+ -+ intr_mask.b.erlysuspend = 1; -+ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.epmismatch = 1; -+ } -+ -+ //intr_mask.b.incomplisoout = 1; -+ intr_mask.b.incomplisoin = 1; -+ -+/* Enable the ignore frame number for ISOC xfers - MAS */ -+/* Disable to support high bandwith ISOC transfers - manukz */ -+#if 0 -+#ifdef DWC_UTE_PER_IO -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ dctl_data_t dctl1 = {.d32 = 0 }; -+ dctl1.b.ifrmnum = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, 0, dctl1.d32); -+ DWC_DEBUG("----Enabled Ignore frame number (0x%08x)", -+ DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dctl)); -+ } -+ } -+#endif -+#endif -+#ifdef DWC_EN_ISOC -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ if (core_if->pti_enh_enable) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.ifrmnum = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dctl, -+ 0, dctl.d32); -+ } else { -+ intr_mask.b.incomplisoin = 1; -+ intr_mask.b.incomplisoout = 1; -+ } -+ } -+ } else { -+ intr_mask.b.incomplisoin = 1; -+ intr_mask.b.incomplisoout = 1; -+ } -+#endif /* DWC_EN_ISOC */ -+ -+ /** @todo NGS: Should this be a module parameter? */ -+#ifdef USE_PERIODIC_EP -+ intr_mask.b.isooutdrop = 1; -+ intr_mask.b.eopframe = 1; -+ intr_mask.b.incomplisoin = 1; -+ intr_mask.b.incomplisoout = 1; -+#endif -+ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, -+ DWC_READ_REG32(&global_regs->gintmsk)); -+} -+ -+/** -+ * This function initializes the DWC_otg controller registers for -+ * device mode. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ */ -+void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ depctl_data_t diepctl = {.d32 = 0 }; -+ grstctl_t resetctl = {.d32 = 0 }; -+ uint32_t rx_fifo_size; -+ fifosize_data_t nptxfifosize; -+ fifosize_data_t txfifosize; -+ dthrctl_data_t dthrctl; -+ fifosize_data_t ptxfifosize; -+ uint16_t rxfsiz, nptxfsiz; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ hwcfg3_data_t hwcfg3 = {.d32 = 0 }; -+ -+ /* Restart the Phy Clock */ -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ -+ /* Device configuration register */ -+ init_devspd(core_if); -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; -+ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; -+ /* Enable Device OUT NAK in case of DDMA mode*/ -+ if (core_if->core_params->dev_out_nak) { -+ dcfg.b.endevoutnak = 1; -+ } -+ -+ if (core_if->core_params->cont_on_bna) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.encontonbna = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } -+ -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ /* Configure data FIFO sizes */ -+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { -+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", -+ core_if->total_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", -+ params->dev_rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", -+ params->dev_nperio_tx_fifo_size); -+ -+ /* Rx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ -+#ifdef DWC_UTE_CFI -+ core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz); -+ core_if->init_rxfsiz = params->dev_rx_fifo_size; -+#endif -+ rx_fifo_size = params->dev_rx_fifo_size; -+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size); -+ -+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ -+ /** Set Periodic Tx FIFO Mask all bits 0 */ -+ core_if->p_tx_msk = 0; -+ -+ /** Set Tx FIFO Mask all bits 0 */ -+ core_if->tx_msk = 0; -+ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ /* Non-periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; -+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; -+ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, -+ nptxfifosize.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ /**@todo NGS: Fix Periodic FIFO Sizing! */ -+ /* -+ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. -+ * Indexes of the FIFO size module parameters in the -+ * dev_perio_tx_fifo_size array and the FIFO size registers in -+ * the dptxfsiz array run from 0 to 14. -+ */ -+ /** @todo Finish debug of this */ -+ ptxfifosize.b.startaddr = -+ nptxfifosize.b.startaddr + nptxfifosize.b.depth; -+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) { -+ ptxfifosize.b.depth = -+ params->dev_perio_tx_fifo_size[i]; -+ DWC_DEBUGPL(DBG_CIL, -+ "initial dtxfsiz[%d]=%08x\n", i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ ptxfifosize.d32); -+ DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n", -+ i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ ptxfifosize.b.startaddr += ptxfifosize.b.depth; -+ } -+ } else { -+ /* -+ * Tx FIFOs These FIFOs are numbered from 1 to 15. -+ * Indexes of the FIFO size module parameters in the -+ * dev_tx_fifo_size array and the FIFO size registers in -+ * the dtxfsiz array run from 0 to 14. -+ */ -+ -+ /* Non-periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+#ifdef DWC_UTE_CFI -+ core_if->pwron_gnptxfsiz = -+ (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); -+ core_if->init_gnptxfsiz = -+ params->dev_nperio_tx_fifo_size; -+#endif -+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; -+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; -+ -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, -+ nptxfifosize.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ txfifosize.b.startaddr = -+ nptxfifosize.b.startaddr + nptxfifosize.b.depth; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) { -+ -+ txfifosize.b.depth = -+ params->dev_tx_fifo_size[i]; -+ -+ DWC_DEBUGPL(DBG_CIL, -+ "initial dtxfsiz[%d]=%08x\n", -+ i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ -+#ifdef DWC_UTE_CFI -+ core_if->pwron_txfsiz[i] = -+ (DWC_READ_REG32 -+ (&global_regs->dtxfsiz[i]) >> 16); -+ core_if->init_txfsiz[i] = -+ params->dev_tx_fifo_size[i]; -+#endif -+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i], -+ txfifosize.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, -+ "new dtxfsiz[%d]=%08x\n", -+ i, -+ DWC_READ_REG32(&global_regs->dtxfsiz -+ [i])); -+ -+ txfifosize.b.startaddr += txfifosize.b.depth; -+ } -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */ -+ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); -+ hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3); -+ gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16); -+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); -+ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); -+ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); -+ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz; -+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); -+ } -+ } -+ -+ /* Flush the FIFOs */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ -+ dwc_otg_flush_rx_fifo(core_if); -+ -+ /* Flush the Learning Queue. */ -+ resetctl.b.intknqflsh = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { -+ core_if->start_predict = 0; -+ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { -+ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active -+ } -+ core_if->nextep_seq[0] = 0; -+ core_if->first_in_nextep_seq = 0; -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); -+ diepctl.b.nextep = 0; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); -+ -+ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt = 2; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]); -+ } -+ DWC_DEBUGPL(DBG_CILV,"\n"); -+ } -+ -+ /* Clear all pending Device Interrupts */ -+ /** @todo - if the condition needed to be checked -+ * or in any case all pending interrutps should be cleared? -+ */ -+ if (core_if->multiproc_int_enable) { -+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) { -+ DWC_WRITE_REG32(&dev_if-> -+ dev_global_regs->diepeachintmsk[i], 0); -+ } -+ } -+ -+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { -+ DWC_WRITE_REG32(&dev_if-> -+ dev_global_regs->doepeachintmsk[i], 0); -+ } -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0); -+ } else { -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0); -+ } -+ -+ for (i = 0; i <= dev_if->num_in_eps; i++) { -+ depctl_data_t depctl; -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (depctl.b.epena) { -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ } else { -+ depctl.d32 = 0; -+ } -+ -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); -+ -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0); -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0); -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF); -+ } -+ -+ for (i = 0; i <= dev_if->num_out_eps; i++) { -+ depctl_data_t depctl; -+ depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); -+ if (depctl.b.epena) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ gintmsk_data_t gintsts = {.d32 = 0 }; -+ doepint_data_t doepint = {.d32 = 0 }; -+ dctl.b.sgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ do { -+ dwc_udelay(10); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ } while (!gintsts.b.goutnakeff); -+ gintsts.d32 = 0; -+ gintsts.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32); -+ do { -+ dwc_udelay(10); -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[i]->doepint); -+ } while (!doepint.b.epdisabled); -+ -+ doepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32); -+ -+ dctl.d32 = 0; -+ dctl.b.cgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } else { -+ depctl.d32 = 0; -+ } -+ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); -+ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0); -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0); -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF); -+ } -+ -+ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) { -+ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; -+ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; -+ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; -+ -+ dev_if->rx_thr_length = params->rx_thr_length; -+ dev_if->tx_thr_length = params->tx_thr_length; -+ -+ dev_if->setup_desc_index = 0; -+ -+ dthrctl.d32 = 0; -+ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; -+ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; -+ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; -+ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; -+ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; -+ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio; -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl, -+ dthrctl.d32); -+ -+ DWC_DEBUGPL(DBG_CIL, -+ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", -+ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, -+ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, -+ dthrctl.b.rx_thr_len); -+ -+ } -+ -+ dwc_otg_enable_device_interrupts(core_if); -+ -+ { -+ diepmsk_data_t msk = {.d32 = 0 }; -+ msk.b.txfifoundrn = 1; -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs-> -+ diepeachintmsk[0], msk.d32, msk.d32); -+ } else { -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, -+ msk.d32, msk.d32); -+ } -+ } -+ -+ if (core_if->multiproc_int_enable) { -+ /* Set NAK on Babble */ -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.nakonbble = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } -+ -+ if (core_if->snpsid >= OTG_CORE_REV_2_94a) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl); -+ dctl.b.sftdiscon = 0; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32); -+ } -+} -+ -+/** -+ * This function enables the Host mode interrupts. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if); -+ -+ /* Disable all interrupts. */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* Clear any pending interrupts. */ -+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF); -+ -+ /* Enable the common interrupts */ -+ dwc_otg_enable_common_interrupts(core_if); -+ -+ /* -+ * Enable host mode interrupts without disturbing common -+ * interrupts. -+ */ -+ -+ intr_mask.b.disconnect = 1; -+ intr_mask.b.portintr = 1; -+ intr_mask.b.hcintr = 1; -+ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+} -+ -+/** -+ * This function disables the Host Mode interrupts. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); -+ -+ /* -+ * Disable host mode interrupts without disturbing common -+ * interrupts. -+ */ -+ intr_mask.b.sofintr = 1; -+ intr_mask.b.portintr = 1; -+ intr_mask.b.hcintr = 1; -+ intr_mask.b.ptxfempty = 1; -+ intr_mask.b.nptxfempty = 1; -+ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0); -+} -+ -+/** -+ * This function initializes the DWC_otg controller registers for -+ * host mode. -+ * -+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the -+ * request queues. Host channels are reset to ensure that they are ready for -+ * performing transfers. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * -+ */ -+void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_host_if_t *host_if = core_if->host_if; -+ dwc_otg_core_params_t *params = core_if->core_params; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ fifosize_data_t nptxfifosize; -+ fifosize_data_t ptxfifosize; -+ uint16_t rxfsiz, nptxfsiz, hptxfsiz; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ int i; -+ hcchar_data_t hcchar; -+ hcfg_data_t hcfg; -+ hfir_data_t hfir; -+ dwc_otg_hc_regs_t *hc_regs; -+ int num_channels; -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if); -+ -+ /* Restart the Phy Clock */ -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ -+ /* Initialize Host Configuration Register */ -+ init_fslspclksel(core_if); -+ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { -+ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); -+ hcfg.b.fslssupp = 1; -+ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); -+ -+ } -+ -+ /* This bit allows dynamic reloading of the HFIR register -+ * during runtime. This bit needs to be programmed during -+ * initial configuration and its value must not be changed -+ * during runtime.*/ -+ if (core_if->core_params->reload_ctl == 1) { -+ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); -+ hfir.b.hfirrldctrl = 1; -+ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); -+ } -+ -+ if (core_if->core_params->dma_desc_enable) { -+ uint8_t op_mode = core_if->hwcfg2.b.op_mode; -+ if (! -+ (core_if->hwcfg4.b.desc_dma -+ && (core_if->snpsid >= OTG_CORE_REV_2_90a) -+ && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) -+ || (op_mode == -+ DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG) -+ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) -+ || (op_mode == -+ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) { -+ -+ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n" -+ "Either core version is below 2.90a or " -+ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n" -+ "To run the driver in Buffer DMA host mode set dma_desc_enable " -+ "module parameter to 0.\n"); -+ return; -+ } -+ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg); -+ hcfg.b.descdma = 1; -+ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32); -+ } -+ -+ /* Configure data FIFO sizes */ -+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { -+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", -+ core_if->total_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", -+ params->host_rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", -+ params->host_nperio_tx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n", -+ params->host_perio_tx_fifo_size); -+ -+ /* Rx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ DWC_WRITE_REG32(&global_regs->grxfsiz, -+ params->host_rx_fifo_size); -+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->grxfsiz)); -+ -+ /* Non-periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; -+ nptxfifosize.b.startaddr = params->host_rx_fifo_size; -+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32); -+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxfsiz)); -+ -+ /* Periodic Tx FIFO */ -+ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->hptxfsiz)); -+ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; -+ ptxfifosize.b.startaddr = -+ nptxfifosize.b.startaddr + nptxfifosize.b.depth; -+ DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32); -+ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n", -+ DWC_READ_REG32(&global_regs->hptxfsiz)); -+ -+ if (core_if->en_multiple_tx_fifo -+ && core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */ -+ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg); -+ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff); -+ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16); -+ hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16); -+ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz; -+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32); -+ } -+ } -+ -+ /* TODO - check this */ -+ /* Clear Host Set HNP Enable in the OTG Control Register */ -+ gotgctl.b.hstsethnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ /* Make sure the FIFOs are flushed. */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ ); -+ dwc_otg_flush_rx_fifo(core_if); -+ -+ /* Clear Host Set HNP Enable in the OTG Control Register */ -+ gotgctl.b.hstsethnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ -+ if (!core_if->core_params->dma_desc_enable) { -+ /* Flush out any leftover queued requests. */ -+ num_channels = core_if->core_params->host_channels; -+ -+ for (i = 0; i < num_channels; i++) { -+ hc_regs = core_if->host_if->hc_regs[i]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.chen = 0; -+ hcchar.b.chdis = 1; -+ hcchar.b.epdir = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ } -+ -+ /* Halt all channels to put them into a known state. */ -+ for (i = 0; i < num_channels; i++) { -+ int count = 0; -+ hc_regs = core_if->host_if->hc_regs[i]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 1; -+ hcchar.b.epdir = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs); -+ do { -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (++count > 1000) { -+ DWC_ERROR -+ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n", -+ __func__, i, hcchar.d32, &hc_regs->hcchar); -+ break; -+ } -+ dwc_udelay(1); -+ } while (hcchar.b.chen); -+ } -+ } -+ -+ /* Turn on the vbus power. */ -+ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state); -+ if (core_if->op_state == A_HOST) { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr); -+ if (hprt0.b.prtpwr == 0) { -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(host_if->hprt0, hprt0.d32); -+ } -+ } -+ -+ dwc_otg_enable_host_interrupts(core_if); -+} -+ -+/** -+ * Prepares a host channel for transferring packets to/from a specific -+ * endpoint. The HCCHARn register is set up with the characteristics specified -+ * in _hc. Host channel interrupts that may need to be serviced while this -+ * transfer is in progress are enabled. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ * @param hc Information needed to initialize the host channel -+ */ -+void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ hcintmsk_data_t hc_intr_mask; -+ hcchar_data_t hcchar; -+ hcsplt_data_t hcsplt; -+ -+ uint8_t hc_num = hc->hc_num; -+ dwc_otg_host_if_t *host_if = core_if->host_if; -+ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; -+ -+ /* Clear old interrupt conditions for this host channel. */ -+ hc_intr_mask.d32 = 0xFFFFFFFF; -+ hc_intr_mask.b.reserved14_31 = 0; -+ DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32); -+ -+ /* Enable channel interrupts required for this transfer. */ -+ hc_intr_mask.d32 = 0; -+ hc_intr_mask.b.chhltd = 1; -+ if (core_if->dma_enable) { -+ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */ -+ if (!core_if->dma_desc_enable) -+ hc_intr_mask.b.ahberr = 1; -+ else { -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ hc_intr_mask.b.xfercompl = 1; -+ } -+ -+ if (hc->error_state && !hc->do_split && -+ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { -+ hc_intr_mask.b.ack = 1; -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.datatglerr = 1; -+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { -+ hc_intr_mask.b.nak = 1; -+ } -+ } -+ } -+ } else { -+ switch (hc->ep_type) { -+ case DWC_OTG_EP_TYPE_CONTROL: -+ case DWC_OTG_EP_TYPE_BULK: -+ hc_intr_mask.b.xfercompl = 1; -+ hc_intr_mask.b.stall = 1; -+ hc_intr_mask.b.xacterr = 1; -+ hc_intr_mask.b.datatglerr = 1; -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.bblerr = 1; -+ } else { -+ hc_intr_mask.b.nak = 1; -+ hc_intr_mask.b.nyet = 1; -+ if (hc->do_ping) { -+ hc_intr_mask.b.ack = 1; -+ } -+ } -+ -+ if (hc->do_split) { -+ hc_intr_mask.b.nak = 1; -+ if (hc->complete_split) { -+ hc_intr_mask.b.nyet = 1; -+ } else { -+ hc_intr_mask.b.ack = 1; -+ } -+ } -+ -+ if (hc->error_state) { -+ hc_intr_mask.b.ack = 1; -+ } -+ break; -+ case DWC_OTG_EP_TYPE_INTR: -+ hc_intr_mask.b.xfercompl = 1; -+ hc_intr_mask.b.nak = 1; -+ hc_intr_mask.b.stall = 1; -+ hc_intr_mask.b.xacterr = 1; -+ hc_intr_mask.b.datatglerr = 1; -+ hc_intr_mask.b.frmovrun = 1; -+ -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.bblerr = 1; -+ } -+ if (hc->error_state) { -+ hc_intr_mask.b.ack = 1; -+ } -+ if (hc->do_split) { -+ if (hc->complete_split) { -+ hc_intr_mask.b.nyet = 1; -+ } else { -+ hc_intr_mask.b.ack = 1; -+ } -+ } -+ break; -+ case DWC_OTG_EP_TYPE_ISOC: -+ hc_intr_mask.b.xfercompl = 1; -+ hc_intr_mask.b.frmovrun = 1; -+ hc_intr_mask.b.ack = 1; -+ -+ if (hc->ep_is_in) { -+ hc_intr_mask.b.xacterr = 1; -+ hc_intr_mask.b.bblerr = 1; -+ } -+ break; -+ } -+ } -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32); -+ -+ /* -+ * Program the HCCHARn register with the endpoint characteristics for -+ * the current transfer. -+ */ -+ hcchar.d32 = 0; -+ hcchar.b.devaddr = hc->dev_addr; -+ hcchar.b.epnum = hc->ep_num; -+ hcchar.b.epdir = hc->ep_is_in; -+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); -+ hcchar.b.eptype = hc->ep_type; -+ hcchar.b.mps = hc->max_packet; -+ -+ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n", -+ __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum); -+ DWC_DEBUGPL(DBG_HCDV, " Is In %d, Is Low Speed %d, EP Type %d, " -+ "Max Pkt %d, Multi Cnt %d\n", -+ hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype, -+ hcchar.b.mps, hcchar.b.multicnt); -+ -+ /* -+ * Program the HCSPLIT register for SPLITs -+ */ -+ hcsplt.d32 = 0; -+ if (hc->do_split) { -+ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", -+ hc->hc_num, -+ hc->complete_split ? "CSPLIT" : "SSPLIT"); -+ hcsplt.b.compsplt = hc->complete_split; -+ hcsplt.b.xactpos = hc->xact_pos; -+ hcsplt.b.hubaddr = hc->hub_addr; -+ hcsplt.b.prtaddr = hc->port_addr; -+ DWC_DEBUGPL(DBG_HCDV, "\t comp split %d\n", hc->complete_split); -+ DWC_DEBUGPL(DBG_HCDV, "\t xact pos %d\n", hc->xact_pos); -+ DWC_DEBUGPL(DBG_HCDV, "\t hub addr %d\n", hc->hub_addr); -+ DWC_DEBUGPL(DBG_HCDV, "\t port addr %d\n", hc->port_addr); -+ DWC_DEBUGPL(DBG_HCDV, "\t is_in %d\n", hc->ep_is_in); -+ DWC_DEBUGPL(DBG_HCDV, "\t Max Pkt: %d\n", hcchar.b.mps); -+ DWC_DEBUGPL(DBG_HCDV, "\t xferlen: %d\n", hc->xfer_len); -+ } -+ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); -+ -+} -+ -+/** -+ * Attempts to halt a host channel. This function should only be called in -+ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under -+ * normal circumstances in DMA mode, the controller halts the channel when the -+ * transfer is complete or a condition occurs that requires application -+ * intervention. -+ * -+ * In slave mode, checks for a free request queue entry, then sets the Channel -+ * Enable and Channel Disable bits of the Host Channel Characteristics -+ * register of the specified channel to intiate the halt. If there is no free -+ * request queue entry, sets only the Channel Disable bit of the HCCHARn -+ * register to flush requests for this channel. In the latter case, sets a -+ * flag to indicate that the host channel needs to be halted when a request -+ * queue slot is open. -+ * -+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the -+ * HCCHARn register. The controller ensures there is space in the request -+ * queue before submitting the halt request. -+ * -+ * Some time may elapse before the core flushes any posted requests for this -+ * host channel and halts. The Channel Halted interrupt handler completes the -+ * deactivation of the host channel. -+ * -+ * @param core_if Controller register interface. -+ * @param hc Host channel to halt. -+ * @param halt_status Reason for halting the channel. -+ */ -+void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if, -+ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status) -+{ -+ gnptxsts_data_t nptxsts; -+ hptxsts_data_t hptxsts; -+ hcchar_data_t hcchar; -+ dwc_otg_hc_regs_t *hc_regs; -+ dwc_otg_core_global_regs_t *global_regs; -+ dwc_otg_host_global_regs_t *host_global_regs; -+ -+ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ global_regs = core_if->core_global_regs; -+ host_global_regs = core_if->host_if->host_global_regs; -+ -+ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS), -+ "halt_status = %d\n", halt_status); -+ -+ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || -+ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { -+ /* -+ * Disable all channel interrupts except Ch Halted. The QTD -+ * and QH state associated with this transfer has been cleared -+ * (in the case of URB_DEQUEUE), so the channel needs to be -+ * shut down carefully to prevent crashes. -+ */ -+ hcintmsk_data_t hcintmsk; -+ hcintmsk.d32 = 0; -+ hcintmsk.b.chhltd = 1; -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32); -+ -+ /* -+ * Make sure no other interrupts besides halt are currently -+ * pending. Handling another interrupt could cause a crash due -+ * to the QTD and QH state. -+ */ -+ DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32); -+ -+ /* -+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR -+ * even if the channel was already halted for some other -+ * reason. -+ */ -+ hc->halt_status = halt_status; -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen == 0) { -+ /* -+ * The channel is either already halted or it hasn't -+ * started yet. In DMA mode, the transfer may halt if -+ * it finishes normally or a condition occurs that -+ * requires driver intervention. Don't want to halt -+ * the channel again. In either Slave or DMA mode, -+ * it's possible that the transfer has been assigned -+ * to a channel, but not started yet when an URB is -+ * dequeued. Don't want to halt a channel that hasn't -+ * started yet. -+ */ -+ return; -+ } -+ } -+ if (hc->halt_pending) { -+ /* -+ * A halt has already been issued for this channel. This might -+ * happen when a transfer is aborted by a higher level in -+ * the stack. -+ */ -+#ifdef DEBUG -+ DWC_PRINTF -+ ("*** %s: Channel %d, _hc->halt_pending already set ***\n", -+ __func__, hc->hc_num); -+ -+#endif -+ return; -+ } -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* No need to set the bit in DDMA for disabling the channel */ -+ //TODO check it everywhere channel is disabled -+ if (!core_if->core_params->dma_desc_enable) -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 1; -+ -+ if (!core_if->dma_enable) { -+ /* Check for space in the request queue to issue the halt. */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || -+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { -+ nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ if (nptxsts.b.nptxqspcavail == 0) { -+ hcchar.b.chen = 0; -+ } -+ } else { -+ hptxsts.d32 = -+ DWC_READ_REG32(&host_global_regs->hptxsts); -+ if ((hptxsts.b.ptxqspcavail == 0) -+ || (core_if->queuing_high_bandwidth)) { -+ hcchar.b.chen = 0; -+ } -+ } -+ } -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ hc->halt_status = halt_status; -+ -+ if (hcchar.b.chen) { -+ hc->halt_pending = 1; -+ hc->halt_on_queue = 0; -+ } else { -+ hc->halt_on_queue = 1; -+ } -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); -+ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); -+ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); -+ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); -+ -+ return; -+} -+ -+/** -+ * Clears the transfer state for a host channel. This function is normally -+ * called after a transfer is done and the host channel is being released. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Identifies the host channel to clean up. -+ */ -+void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ dwc_otg_hc_regs_t *hc_regs; -+ -+ hc->xfer_started = 0; -+ -+ /* -+ * Clear channel interrupt enables and any unhandled channel interrupt -+ * conditions. -+ */ -+ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0); -+ DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF); -+#ifdef DEBUG -+ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]); -+#endif -+} -+ -+/** -+ * Sets the channel property that indicates in which frame a periodic transfer -+ * should occur. This is always set to the _next_ frame. This function has no -+ * effect on non-periodic transfers. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Identifies the host channel to set up and its properties. -+ * @param hcchar Current value of the HCCHAR register for the specified host -+ * channel. -+ */ -+static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if, -+ dwc_hc_t * hc, hcchar_data_t * hcchar) -+{ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ hfnum_data_t hfnum; -+ hfnum.d32 = -+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum); -+ -+ /* 1 if _next_ frame is odd, 0 if it's even */ -+ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; -+#ifdef DEBUG -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split -+ && !hc->complete_split) { -+ switch (hfnum.b.frnum & 0x7) { -+ case 7: -+ core_if->hfnum_7_samples++; -+ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; -+ break; -+ case 0: -+ core_if->hfnum_0_samples++; -+ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; -+ break; -+ default: -+ core_if->hfnum_other_samples++; -+ core_if->hfnum_other_frrem_accum += -+ hfnum.b.frrem; -+ break; -+ } -+ } -+#endif -+ } -+} -+ -+#ifdef DEBUG -+void hc_xfer_timeout(void *ptr) -+{ -+ hc_xfer_info_t *xfer_info = NULL; -+ int hc_num = 0; -+ -+ if (ptr) -+ xfer_info = (hc_xfer_info_t *) ptr; -+ -+ if (!xfer_info->hc) { -+ DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc); -+ return; -+ } -+ -+ hc_num = xfer_info->hc->hc_num; -+ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); -+ DWC_WARN(" start_hcchar_val 0x%08x\n", -+ xfer_info->core_if->start_hcchar_val[hc_num]); -+} -+#endif -+ -+void ep_xfer_timeout(void *ptr) -+{ -+ ep_xfer_info_t *xfer_info = NULL; -+ int ep_num = 0; -+ dctl_data_t dctl = {.d32 = 0 }; -+ gintsts_data_t gintsts = {.d32 = 0 }; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ if (ptr) -+ xfer_info = (ep_xfer_info_t *) ptr; -+ -+ if (!xfer_info->ep) { -+ DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep); -+ return; -+ } -+ -+ ep_num = xfer_info->ep->num; -+ DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num); -+ /* Put the sate to 2 as it was time outed */ -+ xfer_info->state = 2; -+ -+ dctl.d32 = -+ DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl); -+ gintsts.d32 = -+ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts); -+ gintmsk.d32 = -+ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk); -+ -+ if (!gintmsk.b.goutnakeff) { -+ /* Unmask it */ -+ gintmsk.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk, -+ gintmsk.d32); -+ -+ } -+ -+ if (!gintsts.b.goutnakeff) { -+ dctl.b.sgoutnak = 1; -+ } -+ DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ -+} -+ -+void set_pid_isoc(dwc_hc_t * hc) -+{ -+ /* Set up the initial PID for the transfer. */ -+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { -+ if (hc->ep_is_in) { -+ if (hc->multi_count == 1) { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; -+ } else if (hc->multi_count == 2) { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; -+ } else { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA2; -+ } -+ } else { -+ if (hc->multi_count == 1) { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; -+ } else { -+ hc->data_pid_start = DWC_OTG_HC_PID_MDATA; -+ } -+ } -+ } else { -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; -+ } -+} -+ -+/** -+ * This function does the setup for a data transfer for a host channel and -+ * starts the transfer. May be called in either Slave mode or DMA mode. In -+ * Slave mode, the caller must ensure that there is sufficient space in the -+ * request queue and Tx Data FIFO. -+ * -+ * For an OUT transfer in Slave mode, it loads a data packet into the -+ * appropriate FIFO. If necessary, additional data packets will be loaded in -+ * the Host ISR. -+ * -+ * For an IN transfer in Slave mode, a data packet is requested. The data -+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, -+ * additional data packets are requested in the Host ISR. -+ * -+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ -+ * register along with a packet count of 1 and the channel is enabled. This -+ * causes a single PING transaction to occur. Other fields in HCTSIZ are -+ * simply set to 0 since no data transfer occurs in this case. -+ * -+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with -+ * all the information required to perform the subsequent data transfer. In -+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the -+ * controller performs the entire PING protocol, then starts the data -+ * transfer. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Information needed to initialize the host channel. The xfer_len -+ * value may be reduced to accommodate the max widths of the XferSize and -+ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed -+ * to reflect the final xfer_len value. -+ */ -+void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ uint16_t num_packets; -+ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; -+ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; -+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ -+ hctsiz.d32 = 0; -+ -+ if (hc->do_ping) { -+ if (!core_if->dma_enable) { -+ dwc_otg_hc_do_ping(core_if, hc); -+ hc->xfer_started = 1; -+ return; -+ } else { -+ hctsiz.b.dopng = 1; -+ } -+ } -+ -+ if (hc->do_split) { -+ num_packets = 1; -+ -+ if (hc->complete_split && !hc->ep_is_in) { -+ /* For CSPLIT OUT Transfer, set the size to 0 so the -+ * core doesn't expect any data written to the FIFO */ -+ hc->xfer_len = 0; -+ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { -+ hc->xfer_len = hc->max_packet; -+ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { -+ hc->xfer_len = 188; -+ } -+ -+ hctsiz.b.xfersize = hc->xfer_len; -+ } else { -+ /* -+ * Ensure that the transfer length and packet count will fit -+ * in the widths allocated for them in the HCTSIZn register. -+ */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * Make sure the transfer size is no larger than one -+ * (micro)frame's worth of data. (A check was done -+ * when the periodic transfer was accepted to ensure -+ * that a (micro)frame's worth of data can be -+ * programmed into a channel.) -+ */ -+ uint32_t max_periodic_len = -+ hc->multi_count * hc->max_packet; -+ if (hc->xfer_len > max_periodic_len) { -+ hc->xfer_len = max_periodic_len; -+ } else { -+ } -+ } else if (hc->xfer_len > max_hc_xfer_size) { -+ /* Make sure that xfer_len is a multiple of max packet size. */ -+ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; -+ } -+ -+ if (hc->xfer_len > 0) { -+ num_packets = -+ (hc->xfer_len + hc->max_packet - -+ 1) / hc->max_packet; -+ if (num_packets > max_hc_pkt_count) { -+ num_packets = max_hc_pkt_count; -+ hc->xfer_len = num_packets * hc->max_packet; -+ } -+ } else { -+ /* Need 1 packet for transfer length of 0. */ -+ num_packets = 1; -+ } -+ -+ if (hc->ep_is_in) { -+ /* Always program an integral # of max packets for IN transfers. */ -+ hc->xfer_len = num_packets * hc->max_packet; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * Make sure that the multi_count field matches the -+ * actual transfer length. -+ */ -+ hc->multi_count = num_packets; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ set_pid_isoc(hc); -+ -+ hctsiz.b.xfersize = hc->xfer_len; -+ } -+ -+ hc->start_pkt_count = num_packets; -+ hctsiz.b.pktcnt = num_packets; -+ hctsiz.b.pid = hc->data_pid_start; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); -+ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); -+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); -+ -+ if (core_if->dma_enable) { -+ dwc_dma_t dma_addr; -+ if (hc->align_buff) { -+ dma_addr = hc->align_buff; -+ } else { -+ dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff); -+ } -+ DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr); -+ } -+ -+ /* Start the split */ -+ if (hc->do_split) { -+ hcsplt_data_t hcsplt; -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ hcsplt.b.spltena = 1; -+ DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32); -+ } -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.multicnt = hc->multi_count; -+ hc_set_even_odd_frame(core_if, hc, &hcchar); -+#ifdef DEBUG -+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; -+ if (hcchar.b.chdis) { -+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", -+ __func__, hc->hc_num, hcchar.d32); -+ } -+#endif -+ -+ /* Set host channel enable after all other setup is complete. */ -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ hc->xfer_started = 1; -+ hc->requests++; -+ -+ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) { -+ /* Load OUT packet into the appropriate Tx FIFO. */ -+ dwc_otg_hc_write_packet(core_if, hc); -+ } -+#ifdef DEBUG -+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { -+ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n", -+ hc->hc_num, core_if);//GRAYG -+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; -+ core_if->hc_xfer_info[hc->hc_num].hc = hc; -+ -+ /* Start a timer for this transfer. */ -+ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); -+ } -+#endif -+} -+ -+/** -+ * This function does the setup for a data transfer for a host channel -+ * and starts the transfer in Descriptor DMA mode. -+ * -+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set. -+ * Sets PID and NTD values. For periodic transfers -+ * initializes SCHED_INFO field with micro-frame bitmap. -+ * -+ * Initializes HCDMA register with descriptor list address and CTD value -+ * then starts the transfer via enabling the channel. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param hc Information needed to initialize the host channel. -+ */ -+void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ hcdma_data_t hcdma; -+ -+ hctsiz.d32 = 0; -+ -+ if (hc->do_ping) -+ hctsiz.b_ddma.dopng = 1; -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ set_pid_isoc(hc); -+ -+ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */ -+ hctsiz.b_ddma.pid = hc->data_pid_start; -+ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */ -+ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */ -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); -+ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd); -+ -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ hcdma.d32 = 0; -+ hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11; -+ -+ /* Always start from first descriptor. */ -+ hcdma.b.ctd = 0; -+ DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.multicnt = hc->multi_count; -+ -+#ifdef DEBUG -+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; -+ if (hcchar.b.chdis) { -+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", -+ __func__, hc->hc_num, hcchar.d32); -+ } -+#endif -+ -+ /* Set host channel enable after all other setup is complete. */ -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ hc->xfer_started = 1; -+ hc->requests++; -+ -+#ifdef DEBUG -+ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR) -+ && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) { -+ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n", -+ hc->hc_num, core_if);//GRAYG -+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; -+ core_if->hc_xfer_info[hc->hc_num].hc = hc; -+ /* Start a timer for this transfer. */ -+ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000); -+ } -+#endif -+ -+} -+ -+/** -+ * This function continues a data transfer that was started by previous call -+ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is -+ * sufficient space in the request queue and Tx Data FIFO. This function -+ * should only be called in Slave mode. In DMA mode, the controller acts -+ * autonomously to complete transfers programmed to a host channel. -+ * -+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO -+ * if there is any data remaining to be queued. For an IN transfer, another -+ * data packet is always requested. For the SETUP phase of a control transfer, -+ * this function does nothing. -+ * -+ * @return 1 if a new request is queued, 0 if no more requests are required -+ * for this transfer. -+ */ -+int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ -+ if (hc->do_split) { -+ /* SPLITs always queue just once per channel */ -+ return 0; -+ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { -+ /* SETUPs are queued only once since they can't be NAKed. */ -+ return 0; -+ } else if (hc->ep_is_in) { -+ /* -+ * Always queue another request for other IN transfers. If -+ * back-to-back INs are issued and NAKs are received for both, -+ * the driver may still be processing the first NAK when the -+ * second NAK is received. When the interrupt handler clears -+ * the NAK interrupt for the first NAK, the second NAK will -+ * not be seen. So we can't depend on the NAK interrupt -+ * handler to requeue a NAKed request. Instead, IN requests -+ * are issued each time this function is called. When the -+ * transfer completes, the extra requests for the channel will -+ * be flushed. -+ */ -+ hcchar_data_t hcchar; -+ dwc_otg_hc_regs_t *hc_regs = -+ core_if->host_if->hc_regs[hc->hc_num]; -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hc_set_even_odd_frame(core_if, hc, &hcchar); -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", -+ hcchar.d32); -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ hc->requests++; -+ return 1; -+ } else { -+ /* OUT transfers. */ -+ if (hc->xfer_count < hc->xfer_len) { -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ hcchar_data_t hcchar; -+ dwc_otg_hc_regs_t *hc_regs; -+ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hc_set_even_odd_frame(core_if, hc, &hcchar); -+ } -+ -+ /* Load OUT packet into the appropriate Tx FIFO. */ -+ dwc_otg_hc_write_packet(core_if, hc); -+ hc->requests++; -+ return 1; -+ } else { -+ return 0; -+ } -+ } -+} -+ -+/** -+ * Starts a PING transfer. This function should only be called in Slave mode. -+ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. -+ */ -+void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); -+ -+ hctsiz.d32 = 0; -+ hctsiz.b.dopng = 1; -+ hctsiz.b.pktcnt = 1; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.chen = 1; -+ hcchar.b.chdis = 0; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+} -+ -+/* -+ * This function writes a packet into the Tx FIFO associated with the Host -+ * Channel. For a channel associated with a non-periodic EP, the non-periodic -+ * Tx FIFO is written. For a channel associated with a periodic EP, the -+ * periodic Tx FIFO is written. This function should only be called in Slave -+ * mode. -+ * -+ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by -+ * then number of bytes written to the Tx FIFO. -+ */ -+void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc) -+{ -+ uint32_t i; -+ uint32_t remaining_count; -+ uint32_t byte_count; -+ uint32_t dword_count; -+ -+ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff); -+ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; -+ -+ remaining_count = hc->xfer_len - hc->xfer_count; -+ if (remaining_count > hc->max_packet) { -+ byte_count = hc->max_packet; -+ } else { -+ byte_count = remaining_count; -+ } -+ -+ dword_count = (byte_count + 3) / 4; -+ -+ if ((((unsigned long)data_buff) & 0x3) == 0) { -+ /* xfer_buff is DWORD aligned. */ -+ for (i = 0; i < dword_count; i++, data_buff++) { -+ DWC_WRITE_REG32(data_fifo, *data_buff); -+ } -+ } else { -+ /* xfer_buff is not DWORD aligned. */ -+ for (i = 0; i < dword_count; i++, data_buff++) { -+ uint32_t data; -+ data = -+ (data_buff[0] | data_buff[1] << 8 | data_buff[2] << -+ 16 | data_buff[3] << 24); -+ DWC_WRITE_REG32(data_fifo, data); -+ } -+ } -+ -+ hc->xfer_count += byte_count; -+ hc->xfer_buff += byte_count; -+} -+ -+/** -+ * Gets the current USB frame number. This is the frame number from the last -+ * SOF packet. -+ */ -+uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ /* read current frame/microframe number from DSTS register */ -+ return dsts.b.soffn; -+} -+ -+/** -+ * Calculates and gets the frame Interval value of HFIR register according PHY -+ * type and speed.The application can modify a value of HFIR register only after -+ * the Port Enable bit of the Host Port Control and Status register -+ * (HPRT.PrtEnaPort) has been set. -+*/ -+ -+uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if) -+{ -+ gusbcfg_data_t usbcfg; -+ hwcfg2_data_t hwcfg2; -+ hprt0_data_t hprt0; -+ int clock = 60; // default value -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2); -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) -+ clock = 60; -+ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3) -+ clock = 48; -+ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && -+ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) -+ clock = 30; -+ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel && -+ !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif) -+ clock = 60; -+ if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel && -+ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif) -+ clock = 48; -+ if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2) -+ clock = 48; -+ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1) -+ clock = 48; -+ if (hprt0.b.prtspd == 0) -+ /* High speed case */ -+ return 125 * clock - 1; -+ else -+ /* FS/LS case */ -+ return 1000 * clock - 1; -+} -+ -+/** -+ * This function reads a setup packet from the Rx FIFO into the destination -+ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) -+ * Interrupt routine when a SETUP packet has been received in Slave mode. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dest Destination buffer for packet data. -+ */ -+void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest) -+{ -+ device_grxsts_data_t status; -+ /* Get the 8 bytes of a setup transaction data */ -+ -+ /* Pop 2 DWORDS off the receive data FIFO into memory */ -+ dest[0] = DWC_READ_REG32(core_if->data_fifo[0]); -+ dest[1] = DWC_READ_REG32(core_if->data_fifo[0]); -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ status.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->grxstsp); -+ DWC_DEBUGPL(DBG_ANY, -+ "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n", -+ status.b.epnum, status.b.bcnt, status.b.pktsts, -+ status.b.fn, status.b.fn); -+ } -+} -+ -+/** -+ * This function enables EP0 OUT to receive SETUP packets and configures EP0 -+ * IN for transmitting packets. It is normally called when the -+ * "Enumeration Done" interrupt occurs. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP0 data. -+ */ -+void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dsts_data_t dsts; -+ depctl_data_t diepctl; -+ depctl_data_t doepctl; -+ dctl_data_t dctl = {.d32 = 0 }; -+ -+ ep->stp_rollover = 0; -+ /* Read the Device Status and Endpoint 0 Control registers */ -+ dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts); -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); -+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); -+ -+ /* Set the MPS of the IN EP based on the enumeration speed */ -+ switch (dsts.b.enumspd) { -+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: -+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: -+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: -+ diepctl.b.mps = DWC_DEP0CTL_MPS_64; -+ break; -+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: -+ diepctl.b.mps = DWC_DEP0CTL_MPS_8; -+ break; -+ } -+ -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); -+ -+ /* Enable OUT EP for receive */ -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ doepctl.b.epena = 1; -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); -+ } -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); -+ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); -+#endif -+ dctl.b.cgnpinnak = 1; -+ -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n", -+ DWC_READ_REG32(&dev_if->dev_global_regs->dctl)); -+ -+} -+ -+/** -+ * This function activates an EP. The Device EP control register for -+ * the EP is configured as defined in the ep structure. Note: This -+ * function is not used for EP0. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to activate. -+ */ -+void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ depctl_data_t depctl; -+ volatile uint32_t *addr; -+ daint_data_t daintmsk = {.d32 = 0 }; -+ dcfg_data_t dcfg; -+ uint8_t i; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, -+ (ep->is_in ? "IN" : "OUT")); -+ -+#ifdef DWC_UTE_PER_IO -+ ep->xiso_frame_num = 0xFFFFFFFF; -+ ep->xiso_active_xfers = 0; -+ ep->xiso_queued_xfers = 0; -+#endif -+ /* Read DEPCTLn register */ -+ if (ep->is_in == 1) { -+ addr = &dev_if->in_ep_regs[ep->num]->diepctl; -+ daintmsk.ep.in = 1 << ep->num; -+ } else { -+ addr = &dev_if->out_ep_regs[ep->num]->doepctl; -+ daintmsk.ep.out = 1 << ep->num; -+ } -+ -+ /* If the EP is already active don't change the EP Control -+ * register. */ -+ depctl.d32 = DWC_READ_REG32(addr); -+ if (!depctl.b.usbactep) { -+ depctl.b.mps = ep->maxpacket; -+ depctl.b.eptype = ep->type; -+ depctl.b.txfnum = ep->tx_fifo_num; -+ -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ depctl.b.setd0pid = 1; // ??? -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ depctl.b.usbactep = 1; -+ -+ /* Update nextep_seq array and EPMSCNT in DCFG*/ -+ if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) { // NP IN EP -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq) -+ break; -+ } -+ core_if->nextep_seq[i] = ep->num; -+ core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq; -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt++; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", -+ core_if->nextep_seq[i]); -+ } -+ -+ } -+ -+ -+ DWC_WRITE_REG32(addr, depctl.d32); -+ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr)); -+ } -+ -+ /* Enable the Interrupt for this EP */ -+ if (core_if->multiproc_int_enable) { -+ if (ep->is_in == 1) { -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.xfercompl = 1; -+ diepmsk.b.timeout = 1; -+ diepmsk.b.epdisabled = 1; -+ diepmsk.b.ahberr = 1; -+ diepmsk.b.intknepmis = 1; -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) -+ diepmsk.b.intknepmis = 0; -+ diepmsk.b.txfifoundrn = 1; //????? -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ diepmsk.b.nak = 1; -+ } -+ -+ -+ -+/* -+ if (core_if->dma_desc_enable) { -+ diepmsk.b.bna = 1; -+ } -+*/ -+/* -+ if (core_if->dma_enable) { -+ doepmsk.b.nak = 1; -+ } -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs-> -+ diepeachintmsk[ep->num], diepmsk.d32); -+ -+ } else { -+ doepmsk_data_t doepmsk = {.d32 = 0 }; -+ doepmsk.b.xfercompl = 1; -+ doepmsk.b.ahberr = 1; -+ doepmsk.b.epdisabled = 1; -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) -+ doepmsk.b.outtknepdis = 1; -+ -+/* -+ -+ if (core_if->dma_desc_enable) { -+ doepmsk.b.bna = 1; -+ } -+*/ -+/* -+ doepmsk.b.babble = 1; -+ doepmsk.b.nyet = 1; -+ doepmsk.b.nak = 1; -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs-> -+ doepeachintmsk[ep->num], doepmsk.d32); -+ } -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk, -+ 0, daintmsk.d32); -+ } else { -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (ep->is_in) { -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.nak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); -+ } else { -+ doepmsk_data_t doepmsk = {.d32 = 0 }; -+ doepmsk.b.outtknepdis = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32); -+ } -+ } -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk, -+ 0, daintmsk.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n", -+ DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk)); -+ -+ ep->stall_clear_flag = 0; -+ -+ return; -+} -+ -+/** -+ * This function deactivates an EP. This is done by clearing the USB Active -+ * EP bit in the Device EP control register. Note: This function is not used -+ * for EP0. EP0 cannot be deactivated. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to deactivate. -+ */ -+void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ daint_data_t daintmsk = {.d32 = 0 }; -+ dcfg_data_t dcfg; -+ uint8_t i = 0; -+ -+#ifdef DWC_UTE_PER_IO -+ ep->xiso_frame_num = 0xFFFFFFFF; -+ ep->xiso_active_xfers = 0; -+ ep->xiso_queued_xfers = 0; -+#endif -+ -+ /* Read DEPCTLn register */ -+ if (ep->is_in == 1) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ daintmsk.ep.in = 1 << ep->num; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ daintmsk.ep.out = 1 << ep->num; -+ } -+ -+ depctl.d32 = DWC_READ_REG32(addr); -+ -+ depctl.b.usbactep = 0; -+ -+ /* Update nextep_seq array and EPMSCNT in DCFG*/ -+ if (!(depctl.b.eptype & 1) && ep->is_in == 1) { // NP EP IN -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ if (core_if->nextep_seq[i] == ep->num) -+ break; -+ } -+ core_if->nextep_seq[i] = core_if->nextep_seq[ep->num]; -+ if (core_if->first_in_nextep_seq == ep->num) -+ core_if->first_in_nextep_seq = i; -+ core_if->nextep_seq[ep->num] = 0xff; -+ depctl.b.nextep = 0; -+ dcfg.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt--; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, -+ dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); -+ } -+ } -+ -+ if (ep->is_in == 1) -+ depctl.b.txfnum = 0; -+ -+ if (core_if->dma_desc_enable) -+ depctl.b.epdis = 1; -+ -+ DWC_WRITE_REG32(addr, depctl.d32); -+ depctl.d32 = DWC_READ_REG32(addr); -+ if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC -+ && depctl.b.epena) { -+ depctl_data_t depctl = {.d32 = 0}; -+ if (ep->is_in) { -+ diepint_data_t diepint = {.d32 = 0}; -+ -+ depctl.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepctl, depctl.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->in_ep_regs[ep->num]-> -+ diepint); -+ } while (!diepint.b.inepnakeff); -+ diepint.b.inepnakeff = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepint, diepint.d32); -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepctl, depctl.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->in_ep_regs[ep->num]-> -+ diepint); -+ } while (!diepint.b.epdisabled); -+ diepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ diepint, diepint.d32); -+ } else { -+ dctl_data_t dctl = {.d32 = 0}; -+ gintmsk_data_t gintsts = {.d32 = 0}; -+ doepint_data_t doepint = {.d32 = 0}; -+ dctl.b.sgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, 0, dctl.d32); -+ do { -+ dwc_udelay(10); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ } while (!gintsts.b.goutnakeff); -+ gintsts.d32 = 0; -+ gintsts.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ depctl.d32 = 0; -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32); -+ do -+ { -+ dwc_udelay(10); -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->num]->doepint); -+ } while (!doepint.b.epdisabled); -+ -+ doepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32); -+ -+ dctl.d32 = 0; -+ dctl.b.cgoutnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ } -+ } -+ -+ /* Disable the Interrupt for this EP */ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk, -+ daintmsk.d32, 0); -+ -+ if (ep->is_in == 1) { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ diepeachintmsk[ep->num], 0); -+ } else { -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[ep->num], 0); -+ } -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk, -+ daintmsk.d32, 0); -+ } -+ -+} -+ -+/** -+ * This function initializes dma descriptor chain. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ uint32_t offset; -+ uint32_t xfer_est; -+ int i; -+ unsigned maxxfer_local, total_len; -+ -+ if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR && -+ (ep->maxpacket%4)) { -+ maxxfer_local = ep->maxpacket; -+ total_len = ep->xfer_len; -+ } else { -+ maxxfer_local = ep->maxxfer; -+ total_len = ep->total_len; -+ } -+ -+ ep->desc_cnt = (total_len / maxxfer_local) + -+ ((total_len % maxxfer_local) ? 1 : 0); -+ -+ if (!ep->desc_cnt) -+ ep->desc_cnt = 1; -+ -+ if (ep->desc_cnt > MAX_DMA_DESC_CNT) -+ ep->desc_cnt = MAX_DMA_DESC_CNT; -+ -+ dma_desc = ep->desc_addr; -+ if (maxxfer_local == ep->maxpacket) { -+ if ((total_len % maxxfer_local) && -+ (total_len/maxxfer_local < MAX_DMA_DESC_CNT)) { -+ xfer_est = (ep->desc_cnt - 1) * maxxfer_local + -+ (total_len % maxxfer_local); -+ } else -+ xfer_est = ep->desc_cnt * maxxfer_local; -+ } else -+ xfer_est = total_len; -+ offset = 0; -+ for (i = 0; i < ep->desc_cnt; ++i) { -+ /** DMA Descriptor Setup */ -+ if (xfer_est > maxxfer_local) { -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 0; -+ dma_desc->status.b.ioc = 0; -+ dma_desc->status.b.sp = 0; -+ dma_desc->status.b.bytes = maxxfer_local; -+ dma_desc->buf = ep->dma_addr + offset; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ xfer_est -= maxxfer_local; -+ offset += maxxfer_local; -+ } else { -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ if (ep->is_in) { -+ dma_desc->status.b.sp = -+ (xfer_est % -+ ep->maxpacket) ? 1 : ((ep-> -+ sent_zlp) ? 1 : 0); -+ dma_desc->status.b.bytes = xfer_est; -+ } else { -+ if (maxxfer_local == ep->maxpacket) -+ dma_desc->status.b.bytes = xfer_est; -+ else -+ dma_desc->status.b.bytes = -+ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3); -+ } -+ -+ dma_desc->buf = ep->dma_addr + offset; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ } -+ dma_desc++; -+ } -+} -+/** -+ * This function is called when to write ISOC data into appropriate dedicated -+ * periodic FIFO. -+ */ -+static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ dtxfsts_data_t txstatus = {.d32 = 0 }; -+ uint32_t len = 0; -+ int epnum = dwc_ep->num; -+ int dwords; -+ -+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); -+ -+ ep_regs = core_if->dev_if->in_ep_regs[epnum]; -+ -+ len = dwc_ep->xfer_len - dwc_ep->xfer_count; -+ -+ if (len > dwc_ep->maxpacket) { -+ len = dwc_ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); -+ -+ while (txstatus.b.txfspcavail > dwords && -+ dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, dwc_ep, 0); -+ -+ len = dwc_ep->xfer_len - dwc_ep->xfer_count; -+ if (len > dwc_ep->maxpacket) { -+ len = dwc_ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, -+ txstatus.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); -+ -+ return 1; -+} -+/** -+ * This function does the setup for a data transfer for an EP and -+ * starts the transfer. For an IN transfer, the packets will be -+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, -+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+ -+void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ deptsiz_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); -+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " -+ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n", -+ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, -+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff, -+ ep->total_len); -+ /* IN endpoint */ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[ep->num]; -+ -+ gnptxsts_data_t gtxstatus; -+ -+ gtxstatus.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); -+ -+ if (core_if->en_multiple_tx_fifo == 0 -+ && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) { -+#ifdef DEBUG -+ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32); -+#endif -+ return; -+ } -+ -+ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); -+ -+ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) -+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? -+ ep->maxxfer : (ep->total_len - ep->xfer_len); -+ else -+ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ? -+ MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); -+ -+ -+ /* Zero Length Packet? */ -+ if ((ep->xfer_len - ep->xfer_count) == 0) { -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 1; -+ } else { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - ep->xfer_count - 1 + -+ ep->maxpacket) / ep->maxpacket; -+ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { -+ deptsiz.b.pktcnt = MAX_PKT_CNT; -+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; -+ } -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) -+ deptsiz.b.mc = deptsiz.b.pktcnt; -+ } -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ if (ep->type != DWC_OTG_EP_TYPE_ISOC) -+ deptsiz.b.mc = 1; -+ DWC_WRITE_REG32(&in_regs->dieptsiz, -+ deptsiz.d32); -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+#ifdef DWC_UTE_CFI -+ /* The descriptor chain should be already initialized by now */ -+ if (ep->buff_mode != BM_STANDARD) { -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ ep->descs_dma_addr); -+ } else { -+#endif -+ init_dma_desc_chain(core_if, ep); -+ /** DIEPDMAn Register write */ -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ ep->dma_desc_addr); -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ } -+ } else { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ if (ep->type != DWC_OTG_EP_TYPE_ISOC) { -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, -+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, -+ * the data will be written into the fifo by the ISR. -+ */ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32 -+ (&core_if->core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk = 1 << ep->num; -+ DWC_MODIFY_REG32 -+ (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ -+ } -+ } -+ } else { -+ write_isoc_tx_fifo(core_if, ep); -+ } -+ } -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ dsts_data_t dsts = {.d32 = 0}; -+ if (ep->bInterval == 1) { -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dsts); -+ ep->frame_num = dsts.b.soffn + ep->bInterval; -+ if (ep->frame_num > 0x3FFF) { -+ ep->frm_overrun = 1; -+ ep->frame_num &= 0x3FFF; -+ } else -+ ep->frm_overrun = 0; -+ if (ep->frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } -+ } -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ } else { -+ /* OUT endpoint */ -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[ep->num]; -+ -+ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); -+ -+ if (!core_if->dma_desc_enable) { -+ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT) -+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? -+ ep->maxxfer : (ep->total_len - ep->xfer_len); -+ else -+ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len -+ - ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len); -+ } -+ -+ /* Program the transfer size and packet count as follows: -+ * -+ * pktcnt = N -+ * xfersize = N * maxpacket -+ */ -+ if ((ep->xfer_len - ep->xfer_count) == 0) { -+ /* Zero Length Packet */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ } else { -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - ep->xfer_count + -+ (ep->maxpacket - 1)) / ep->maxpacket; -+ if (deptsiz.b.pktcnt > MAX_PKT_CNT) { -+ deptsiz.b.pktcnt = MAX_PKT_CNT; -+ } -+ if (!core_if->dma_desc_enable) { -+ ep->xfer_len = -+ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; -+ } -+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", -+ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+#ifdef DWC_UTE_CFI -+ /* The descriptor chain should be already initialized by now */ -+ if (ep->buff_mode != BM_STANDARD) { -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ ep->descs_dma_addr); -+ } else { -+#endif -+ /** This is used for interrupt out transfers*/ -+ if (!ep->xfer_len) -+ ep->xfer_len = ep->total_len; -+ init_dma_desc_chain(core_if, ep); -+ -+ if (core_if->core_params->dev_out_nak) { -+ if (ep->type == DWC_OTG_EP_TYPE_BULK) { -+ deptsiz.b.pktcnt = (ep->total_len + -+ (ep->maxpacket - 1)) / ep->maxpacket; -+ deptsiz.b.xfersize = ep->total_len; -+ /* Remember initial value of doeptsiz */ -+ core_if->start_doeptsiz_val[ep->num] = deptsiz.d32; -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ } -+ } -+ /** DOEPDMAn Register write */ -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ ep->dma_desc_addr); -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ } -+ } else { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } -+ -+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ dsts_data_t dsts = {.d32 = 0}; -+ if (ep->bInterval == 1) { -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dsts); -+ ep->frame_num = dsts.b.soffn + ep->bInterval; -+ if (ep->frame_num > 0x3FFF) { -+ ep->frm_overrun = 1; -+ ep->frame_num &= 0x3FFF; -+ } else -+ ep->frm_overrun = 0; -+ -+ if (ep->frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } -+ } -+ -+ /* EP enable */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ -+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); -+ -+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", -+ DWC_READ_REG32(&out_regs->doepctl), -+ DWC_READ_REG32(&out_regs->doeptsiz)); -+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> -+ daintmsk), -+ DWC_READ_REG32(&core_if->core_global_regs-> -+ gintmsk)); -+ -+ /* Timer is scheduling only for out bulk transfers for -+ * "Device DDMA OUT NAK Enhancement" feature to inform user -+ * about received data payload in case of timeout -+ */ -+ if (core_if->core_params->dev_out_nak) { -+ if (ep->type == DWC_OTG_EP_TYPE_BULK) { -+ core_if->ep_xfer_info[ep->num].core_if = core_if; -+ core_if->ep_xfer_info[ep->num].ep = ep; -+ core_if->ep_xfer_info[ep->num].state = 1; -+ -+ /* Start a timer for this transfer. */ -+ DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000); -+ } -+ } -+ } -+} -+ -+/** -+ * This function setup a zero length transfer in Buffer DMA and -+ * Slave modes for usb requests with zero field set -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ -+ depctl_data_t depctl; -+ deptsiz_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); -+ DWC_PRINTF("zero length transfer is called\n"); -+ -+ /* IN endpoint */ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[ep->num]; -+ -+ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz)); -+ -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 1; -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.b.mc = 1; -+ DWC_WRITE_REG32(&in_regs->dieptsiz, -+ deptsiz.d32); -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, -+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, -+ * the data will be written into the fifo by the ISR. -+ */ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk = 1 << ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ } -+ } -+ } -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ } else { -+ /* OUT endpoint */ -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[ep->num]; -+ -+ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl)); -+ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz)); -+ -+ /* Zero Length Packet */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } -+ -+ /* EP enable */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ -+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); -+ -+ } -+} -+ -+/** -+ * This function does the setup for a data transfer for EP0 and starts -+ * the transfer. For an IN transfer, the packets will be loaded into -+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are -+ * unloaded from the Rx FIFO in the ISR. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP0 data. -+ */ -+void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ deptsiz0_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ -+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " -+ "xfer_buff=%p start_xfer_buff=%p \n", -+ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len, -+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); -+ -+ ep->total_len = ep->xfer_len; -+ -+ /* IN endpoint */ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[0]; -+ -+ gnptxsts_data_t gtxstatus; -+ -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); -+ if (depctl.b.epena) -+ return; -+ } -+ -+ gtxstatus.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); -+ -+ /* If dedicated FIFO every time flush fifo before enable ep*/ -+ if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a) -+ dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num); -+ -+ if (core_if->en_multiple_tx_fifo == 0 -+ && gtxstatus.b.nptxqspcavail == 0 -+ && !core_if->dma_enable) { -+#ifdef DEBUG -+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); -+ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n", -+ DWC_READ_REG32(&in_regs->diepctl)); -+ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", -+ deptsiz.d32, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n", -+ gtxstatus.d32); -+#endif -+ return; -+ } -+ -+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); -+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); -+ -+ /* Zero Length Packet? */ -+ if (ep->xfer_len == 0) { -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 1; -+ } else { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ if (ep->xfer_len > ep->maxpacket) { -+ ep->xfer_len = ep->maxpacket; -+ deptsiz.b.xfersize = ep->maxpacket; -+ } else { -+ deptsiz.b.xfersize = ep->xfer_len; -+ } -+ deptsiz.b.pktcnt = 1; -+ -+ } -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+ dma_desc = core_if->dev_if->in_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.sp = -+ (ep->xfer_len == ep->maxpacket) ? 0 : 1; -+ dma_desc->status.b.bytes = ep->xfer_len; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DIEPDMA0 Register write */ -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ core_if-> -+ dev_if->dma_in_desc_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ } -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, the -+ * data will be written into the fifo by the ISR. -+ */ -+ if (!core_if->dma_enable) { -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk |= 1 << ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ } -+ } -+ } -+ } else { -+ /* OUT endpoint */ -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[0]; -+ -+ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); -+ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); -+ -+ /* Program the transfer size and packet count as follows: -+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) -+ * pktcnt = N */ -+ /* Zero Length Packet */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) -+ deptsiz.b.supcnt = 3; -+ -+ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, -+ deptsiz.d32); -+ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ } else { -+ dma_desc = core_if->dev_if->out_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ dma_desc->status.b.mtrf = 0; -+ dma_desc->status.b.sr = 0; -+ } -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.bytes = ep->maxpacket; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DOEPDMA0 Register write */ -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ core_if->dev_if-> -+ dma_out_desc_addr); -+ } -+ } else { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } -+ -+ /* EP enable */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32); -+ } -+} -+ -+/** -+ * This function continues control IN transfers started by -+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a -+ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one -+ * bit for the packet count. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP0 data. -+ */ -+void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ deptsiz0_data_t deptsiz; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ -+ if (ep->is_in == 1) { -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[0]; -+ gnptxsts_data_t tx_status = {.d32 = 0 }; -+ -+ tx_status.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts); -+ /** @todo Should there be check for room in the Tx -+ * Status Queue. If not remove the code above this comment. */ -+ -+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl); -+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz); -+ -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.b.xfersize = -+ (ep->total_len - ep->xfer_count) > -+ ep->maxpacket ? ep->maxpacket : (ep->total_len - -+ ep->xfer_count); -+ deptsiz.b.pktcnt = 1; -+ if (core_if->dma_enable == 0) { -+ ep->xfer_len += deptsiz.b.xfersize; -+ } else { -+ ep->xfer_len = deptsiz.b.xfersize; -+ } -+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32); -+ } else { -+ ep->xfer_len = -+ (ep->total_len - ep->xfer_count) > -+ ep->maxpacket ? ep->maxpacket : (ep->total_len - -+ ep->xfer_count); -+ -+ dma_desc = core_if->dev_if->in_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.sp = -+ (ep->xfer_len == ep->maxpacket) ? 0 : 1; -+ dma_desc->status.b.bytes = ep->xfer_len; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DIEPDMA0 Register write */ -+ DWC_WRITE_REG32(&in_regs->diepdma, -+ core_if->dev_if->dma_in_desc_addr); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { -+ if (core_if->dma_desc_enable == 0) -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) -+ depctl.b.nextep = core_if->nextep_seq[ep->num]; -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32); -+ -+ /** -+ * Enable the Non-Periodic Tx FIFO empty interrupt, the -+ * data will be written into the fifo by the ISR. -+ */ -+ if (!core_if->dma_enable) { -+ if (core_if->en_multiple_tx_fifo == 0) { -+ /* First clear it from GINTSTS */ -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gintmsk, -+ intr_mask.d32, intr_mask.d32); -+ -+ } else { -+ /* Enable the Tx FIFO Empty Interrupt for this EP */ -+ if (ep->xfer_len > 0) { -+ uint32_t fifoemptymsk = 0; -+ fifoemptymsk |= 1 << ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ 0, fifoemptymsk); -+ } -+ } -+ } -+ } else { -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[0]; -+ -+ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl); -+ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz); -+ -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.xfersize = ep->maxpacket; -+ deptsiz.b.pktcnt = 1; -+ -+ if (core_if->dma_desc_enable == 0) { -+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32); -+ } else { -+ dma_desc = core_if->dev_if->out_desc_addr; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.bytes = ep->maxpacket; -+ dma_desc->buf = ep->dma_addr; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DOEPDMA0 Register write */ -+ DWC_WRITE_REG32(&out_regs->doepdma, -+ core_if->dev_if->dma_out_desc_addr); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", -+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { -+ if (core_if->dma_desc_enable == 0) -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) ep->dma_addr); -+ -+ } -+ -+ /* EP enable, IN data in FIFO */ -+ depctl.b.cnak = 1; -+ depctl.b.epena = 1; -+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32); -+ -+ } -+} -+ -+#ifdef DEBUG -+void dump_msg(const u8 * buf, unsigned int length) -+{ -+ unsigned int start, num, i; -+ char line[52], *p; -+ -+ if (length >= 512) -+ return; -+ start = 0; -+ while (length > 0) { -+ num = length < 16u ? length : 16u; -+ p = line; -+ for (i = 0; i < num; ++i) { -+ if (i == 8) -+ *p++ = ' '; -+ DWC_SPRINTF(p, " %02x", buf[i]); -+ p += 3; -+ } -+ *p = 0; -+ DWC_PRINTF("%6x: %s\n", start, line); -+ buf += num; -+ start += num; -+ length -= num; -+ } -+} -+#else -+static inline void dump_msg(const u8 * buf, unsigned int length) -+{ -+} -+#endif -+ -+/** -+ * This function writes a packet into the Tx FIFO associated with the -+ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For -+ * periodic EPs the periodic Tx FIFO associated with the EP is written -+ * with all packets for the next micro-frame. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to write packet for. -+ * @param dma Indicates if DMA is being used. -+ */ -+void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep, -+ int dma) -+{ -+ /** -+ * The buffer is padded to DWORD on a per packet basis in -+ * slave/dma mode if the MPS is not DWORD aligned. The last -+ * packet, if short, is also padded to a multiple of DWORD. -+ * -+ * ep->xfer_buff always starts DWORD aligned in memory and is a -+ * multiple of DWORD in length -+ * -+ * ep->xfer_len can be any number of bytes -+ * -+ * ep->xfer_count is a multiple of ep->maxpacket until the last -+ * packet -+ * -+ * FIFO access is DWORD */ -+ -+ uint32_t i; -+ uint32_t byte_count; -+ uint32_t dword_count; -+ uint32_t *fifo; -+ uint32_t *data_buff = (uint32_t *) ep->xfer_buff; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, -+ ep); -+ if (ep->xfer_count >= ep->xfer_len) { -+ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); -+ return; -+ } -+ -+ /* Find the byte length of the packet either short packet or MPS */ -+ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { -+ byte_count = ep->xfer_len - ep->xfer_count; -+ } else { -+ byte_count = ep->maxpacket; -+ } -+ -+ /* Find the DWORD length, padded by extra bytes as neccessary if MPS -+ * is not a multiple of DWORD */ -+ dword_count = (byte_count + 3) / 4; -+ -+#ifdef VERBOSE -+ dump_msg(ep->xfer_buff, byte_count); -+#endif -+ -+ /**@todo NGS Where are the Periodic Tx FIFO addresses -+ * intialized? What should this be? */ -+ -+ fifo = core_if->data_fifo[ep->num]; -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", -+ fifo, data_buff, *data_buff, byte_count); -+ -+ if (!dma) { -+ for (i = 0; i < dword_count; i++, data_buff++) { -+ DWC_WRITE_REG32(fifo, *data_buff); -+ } -+ } -+ -+ ep->xfer_count += byte_count; -+ ep->xfer_buff += byte_count; -+ ep->dma_addr += byte_count; -+} -+ -+/** -+ * Set the EP STALL. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to set the stall on. -+ */ -+void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ volatile uint32_t *depctl_addr; -+ -+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, -+ (ep->is_in ? "IN" : "OUT")); -+ -+ if (ep->is_in == 1) { -+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); -+ depctl.d32 = DWC_READ_REG32(depctl_addr); -+ -+ /* set the disable and stall bits */ -+ if (depctl.b.epena) { -+ depctl.b.epdis = 1; -+ } -+ depctl.b.stall = 1; -+ DWC_WRITE_REG32(depctl_addr, depctl.d32); -+ } else { -+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); -+ depctl.d32 = DWC_READ_REG32(depctl_addr); -+ -+ /* set the stall bit */ -+ depctl.b.stall = 1; -+ DWC_WRITE_REG32(depctl_addr, depctl.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); -+ -+ return; -+} -+ -+/** -+ * Clear the EP STALL. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to clear stall from. -+ */ -+void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl; -+ volatile uint32_t *depctl_addr; -+ -+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, -+ (ep->is_in ? "IN" : "OUT")); -+ -+ if (ep->is_in == 1) { -+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); -+ } else { -+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); -+ } -+ -+ depctl.d32 = DWC_READ_REG32(depctl_addr); -+ -+ /* clear the stall bits */ -+ depctl.b.stall = 0; -+ -+ /* -+ * USB Spec 9.4.5: For endpoints using data toggle, regardless -+ * of whether an endpoint has the Halt feature set, a -+ * ClearFeature(ENDPOINT_HALT) request always results in the -+ * data toggle being reinitialized to DATA0. -+ */ -+ if (ep->type == DWC_OTG_EP_TYPE_INTR || -+ ep->type == DWC_OTG_EP_TYPE_BULK) { -+ depctl.b.setd0pid = 1; /* DATA0 */ -+ } -+ -+ DWC_WRITE_REG32(depctl_addr, depctl.d32); -+ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr)); -+ return; -+} -+ -+/** -+ * This function reads a packet from the Rx FIFO into the destination -+ * buffer. To read SETUP data use dwc_otg_read_setup_packet. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dest Destination buffer for the packet. -+ * @param bytes Number of bytes to copy to the destination. -+ */ -+void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, -+ uint8_t * dest, uint16_t bytes) -+{ -+ int i; -+ int word_count = (bytes + 3) / 4; -+ -+ volatile uint32_t *fifo = core_if->data_fifo[0]; -+ uint32_t *data_buff = (uint32_t *) dest; -+ -+ /** -+ * @todo Account for the case where _dest is not dword aligned. This -+ * requires reading data from the FIFO into a uint32_t temp buffer, -+ * then moving it into the data buffer. -+ */ -+ -+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, -+ core_if, dest, bytes); -+ -+ for (i = 0; i < word_count; i++, data_buff++) { -+ *data_buff = DWC_READ_REG32(fifo); -+ } -+ -+ return; -+} -+ -+/** -+ * This functions reads the device registers and prints them -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ volatile uint32_t *addr; -+ -+ DWC_PRINTF("Device Global Registers\n"); -+ addr = &core_if->dev_if->dev_global_regs->dcfg; -+ DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->dctl; -+ DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->dsts; -+ DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->diepmsk; -+ DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->doepmsk; -+ DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->daint; -+ DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->daintmsk; -+ DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->dtknqr1; -+ DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { -+ addr = &core_if->dev_if->dev_global_regs->dtknqr2; -+ DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ addr = &core_if->dev_if->dev_global_regs->dvbusdis; -+ DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ addr = &core_if->dev_if->dev_global_regs->dvbuspulse; -+ DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ -+ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; -+ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ -+ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { -+ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; -+ DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; -+ DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ if (core_if->hwcfg2.b.multi_proc_int) { -+ -+ addr = &core_if->dev_if->dev_global_regs->deachint; -+ DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->dev_global_regs->deachintmsk; -+ DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ addr = -+ &core_if->dev_if-> -+ dev_global_regs->diepeachintmsk[i]; -+ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", -+ i, (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ } -+ -+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { -+ addr = -+ &core_if->dev_if-> -+ dev_global_regs->doepeachintmsk[i]; -+ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n", -+ i, (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ } -+ } -+ -+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_PRINTF("Device IN EP %d Registers\n", i); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepctl; -+ DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepint; -+ DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz; -+ DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepdma; -+ DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts; -+ DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab; -+ DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ ); -+ } -+ -+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) { -+ DWC_PRINTF("Device OUT EP %d Registers\n", i); -+ addr = &core_if->dev_if->out_ep_regs[i]->doepctl; -+ DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->out_ep_regs[i]->doepint; -+ DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz; -+ DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->dev_if->out_ep_regs[i]->doepdma; -+ DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */ -+ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab; -+ DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ } -+} -+ -+/** -+ * This functions reads the SPRAM and prints its content -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if) -+{ -+ volatile uint8_t *addr, *start_addr, *end_addr; -+ -+ DWC_PRINTF("SPRAM Data:\n"); -+ start_addr = (void *)core_if->core_global_regs; -+ DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr); -+ start_addr += 0x00028000; -+ end_addr = (void *)core_if->core_global_regs; -+ end_addr += 0x000280e0; -+ -+ for (addr = start_addr; addr < end_addr; addr += 16) { -+ DWC_PRINTF -+ ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", -+ (unsigned long)addr, addr[0], addr[1], addr[2], addr[3], -+ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9], -+ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15] -+ ); -+ } -+ -+ return; -+} -+ -+/** -+ * This function reads the host registers and prints them -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ volatile uint32_t *addr; -+ -+ DWC_PRINTF("Host Global Registers\n"); -+ addr = &core_if->host_if->host_global_regs->hcfg; -+ DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->hfir; -+ DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->hfnum; -+ DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->hptxsts; -+ DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->haint; -+ DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->host_global_regs->haintmsk; -+ DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ if (core_if->dma_desc_enable) { -+ addr = &core_if->host_if->host_global_regs->hflbaddr; -+ DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ addr = core_if->host_if->hprt0; -+ DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ for (i = 0; i < core_if->core_params->host_channels; i++) { -+ DWC_PRINTF("Host Channel %d Specific Registers\n", i); -+ addr = &core_if->host_if->hc_regs[i]->hcchar; -+ DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcsplt; -+ DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcint; -+ DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcintmsk; -+ DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hctsiz; -+ DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->host_if->hc_regs[i]->hcdma; -+ DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ if (core_if->dma_desc_enable) { -+ addr = &core_if->host_if->hc_regs[i]->hcdmab; -+ DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ -+ } -+ return; -+} -+ -+/** -+ * This function reads the core global registers and prints them -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if) -+{ -+ int i, ep_num; -+ volatile uint32_t *addr; -+ char *txfsiz; -+ -+ DWC_PRINTF("Core Global Registers\n"); -+ addr = &core_if->core_global_regs->gotgctl; -+ DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gotgint; -+ DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gahbcfg; -+ DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gusbcfg; -+ DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->grstctl; -+ DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gintsts; -+ DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gintmsk; -+ DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->grxstsr; -+ DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->grxfsiz; -+ DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gnptxfsiz; -+ DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gnptxsts; -+ DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gi2cctl; -+ DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gpvndctl; -+ DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ggpio; -+ DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->guid; -+ DWC_PRINTF("GUID @0x%08lX : 0x%08X\n", -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gsnpsid; -+ DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg1; -+ DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg2; -+ DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg3; -+ DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->ghwcfg4; -+ DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->glpmcfg; -+ DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gpwrdn; -+ DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->gdfifocfg; -+ DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ addr = &core_if->core_global_regs->adpctl; -+ DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ dwc_otg_adp_read_reg(core_if)); -+ addr = &core_if->core_global_regs->hptxfsiz; -+ DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep; -+ txfsiz = "DPTXFSIZ"; -+ } else { -+ ep_num = core_if->hwcfg4.b.num_in_eps; -+ txfsiz = "DIENPTXF"; -+ } -+ for (i = 0; i < ep_num; i++) { -+ addr = &core_if->core_global_regs->dtxfsiz[i]; -+ DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1, -+ (unsigned long)addr, DWC_READ_REG32(addr)); -+ } -+ addr = core_if->pcgcctl; -+ DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr, -+ DWC_READ_REG32(addr)); -+} -+ -+/** -+ * Flush a Tx FIFO. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param num Tx FIFO to flush. -+ */ -+void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ volatile grstctl_t greset = {.d32 = 0 }; -+ int count = 0; -+ -+ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num); -+ -+ greset.b.txfflsh = 1; -+ greset.b.txfnum = num; -+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); -+ -+ do { -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 10000) { -+ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", -+ __func__, greset.d32, -+ DWC_READ_REG32(&global_regs->gnptxsts)); -+ break; -+ } -+ dwc_udelay(1); -+ } while (greset.b.txfflsh == 1); -+ -+ /* Wait for 3 PHY Clocks */ -+ dwc_udelay(1); -+} -+ -+/** -+ * Flush Rx FIFO. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ volatile grstctl_t greset = {.d32 = 0 }; -+ int count = 0; -+ -+ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__); -+ /* -+ * -+ */ -+ greset.b.rxfflsh = 1; -+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); -+ -+ do { -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 10000) { -+ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, -+ greset.d32); -+ break; -+ } -+ dwc_udelay(1); -+ } while (greset.b.rxfflsh == 1); -+ -+ /* Wait for 3 PHY Clocks */ -+ dwc_udelay(1); -+} -+ -+/** -+ * Do core a soft reset of the core. Be careful with this because it -+ * resets all the internal state machines of the core. -+ */ -+void dwc_otg_core_reset(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ volatile grstctl_t greset = {.d32 = 0 }; -+ int count = 0; -+ -+ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); -+ /* Wait for AHB master IDLE state. */ -+ do { -+ dwc_udelay(10); -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 100000) { -+ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, -+ greset.d32); -+ return; -+ } -+ } -+ while (greset.b.ahbidle == 0); -+ -+ /* Core Soft Reset */ -+ count = 0; -+ greset.b.csftrst = 1; -+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32); -+ do { -+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl); -+ if (++count > 10000) { -+ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", -+ __func__, greset.d32); -+ break; -+ } -+ dwc_udelay(1); -+ } -+ while (greset.b.csftrst == 1); -+ -+ /* Wait for 3 PHY Clocks */ -+ dwc_mdelay(100); -+} -+ -+uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if) -+{ -+ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); -+} -+ -+uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if) -+{ -+ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); -+} -+ -+/** -+ * Register HCD callbacks. The callbacks are used to start and stop -+ * the HCD for interrupt processing. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param cb the HCD callback structure. -+ * @param p pointer to be passed to callback function (usb_hcd*). -+ */ -+void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if, -+ dwc_otg_cil_callbacks_t * cb, void *p) -+{ -+ core_if->hcd_cb = cb; -+ cb->p = p; -+} -+ -+/** -+ * Register PCD callbacks. The callbacks are used to start and stop -+ * the PCD for interrupt processing. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param cb the PCD callback structure. -+ * @param p pointer to be passed to callback function (pcd*). -+ */ -+void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if, -+ dwc_otg_cil_callbacks_t * cb, void *p) -+{ -+ core_if->pcd_cb = cb; -+ cb->p = p; -+} -+ -+#ifdef DWC_EN_ISOC -+ -+/** -+ * This function writes isoc data per 1 (micro)frame into tx fifo -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ dtxfsts_data_t txstatus = {.d32 = 0 }; -+ uint32_t len = 0; -+ uint32_t dwords; -+ -+ ep->xfer_len = ep->data_per_frame; -+ ep->xfer_count = 0; -+ -+ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; -+ -+ len = ep->xfer_len - ep->xfer_count; -+ -+ if (len > ep->maxpacket) { -+ len = ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); -+ -+ while (txstatus.b.txfspcavail > dwords && -+ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, ep, 0); -+ -+ len = ep->xfer_len - ep->xfer_count; -+ if (len > ep->maxpacket) { -+ len = ep->maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num, -+ txstatus.d32); -+ } -+} -+ -+/** -+ * This function initializes a descriptor chain for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dsts_data_t dsts = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ -+ if (ep->is_in) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ } -+ -+ ep->xfer_len = ep->data_per_frame; -+ ep->xfer_count = 0; -+ ep->xfer_buff = ep->cur_pkt_addr; -+ ep->dma_addr = ep->cur_pkt_dma_addr; -+ -+ if (ep->is_in) { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.xfersize = ep->xfer_len; -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; -+ deptsiz.b.mc = deptsiz.b.pktcnt; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, -+ deptsiz.d32); -+ -+ /* Write the DMA register */ -+ if (core_if->dma_enable) { -+ DWC_WRITE_REG32(& -+ (core_if->dev_if->in_ep_regs[ep->num]-> -+ diepdma), (uint32_t) ep->dma_addr); -+ } -+ } else { -+ deptsiz.b.pktcnt = -+ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket; -+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; -+ -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); -+ -+ if (core_if->dma_enable) { -+ DWC_WRITE_REG32(& -+ (core_if->dev_if-> -+ out_ep_regs[ep->num]->doepdma), -+ (uint32_t) ep->dma_addr); -+ } -+ } -+ -+ /** Enable endpoint, clear nak */ -+ -+ depctl.d32 = 0; -+ if (ep->bInterval == 1) { -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ ep->next_frame = dsts.b.soffn + ep->bInterval; -+ -+ if (ep->next_frame & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } else { -+ ep->next_frame += ep->bInterval; -+ -+ if (ep->next_frame & 0x1) { -+ depctl.b.setd1pid = 1; -+ } else { -+ depctl.b.setd0pid = 1; -+ } -+ } -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(addr, 0, depctl.d32); -+ depctl.d32 = DWC_READ_REG32(addr); -+ -+ if (ep->is_in && core_if->dma_enable == 0) { -+ write_isoc_frame_data(core_if, ep); -+ } -+ -+} -+#endif /* DWC_EN_ISOC */ -+ -+static void dwc_otg_set_uninitialized(int32_t * p, int size) -+{ -+ int i; -+ for (i = 0; i < size; i++) { -+ p[i] = -1; -+ } -+} -+ -+static int dwc_otg_param_initialized(int32_t val) -+{ -+ return val != -1; -+} -+ -+static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if) -+{ -+ int i; -+ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params)); -+ if (!core_if->core_params) { -+ return -DWC_E_NO_MEMORY; -+ } -+ dwc_otg_set_uninitialized((int32_t *) core_if->core_params, -+ sizeof(*core_if->core_params) / -+ sizeof(int32_t)); -+ DWC_PRINTF("Setting default values for core params\n"); -+ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default); -+ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default); -+ dwc_otg_set_param_dma_desc_enable(core_if, -+ dwc_param_dma_desc_enable_default); -+ dwc_otg_set_param_opt(core_if, dwc_param_opt_default); -+ dwc_otg_set_param_dma_burst_size(core_if, -+ dwc_param_dma_burst_size_default); -+ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, -+ dwc_param_host_support_fs_ls_low_power_default); -+ dwc_otg_set_param_enable_dynamic_fifo(core_if, -+ dwc_param_enable_dynamic_fifo_default); -+ dwc_otg_set_param_data_fifo_size(core_if, -+ dwc_param_data_fifo_size_default); -+ dwc_otg_set_param_dev_rx_fifo_size(core_if, -+ dwc_param_dev_rx_fifo_size_default); -+ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, -+ dwc_param_dev_nperio_tx_fifo_size_default); -+ dwc_otg_set_param_host_rx_fifo_size(core_if, -+ dwc_param_host_rx_fifo_size_default); -+ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, -+ dwc_param_host_nperio_tx_fifo_size_default); -+ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, -+ dwc_param_host_perio_tx_fifo_size_default); -+ dwc_otg_set_param_max_transfer_size(core_if, -+ dwc_param_max_transfer_size_default); -+ dwc_otg_set_param_max_packet_count(core_if, -+ dwc_param_max_packet_count_default); -+ dwc_otg_set_param_host_channels(core_if, -+ dwc_param_host_channels_default); -+ dwc_otg_set_param_dev_endpoints(core_if, -+ dwc_param_dev_endpoints_default); -+ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default); -+ dwc_otg_set_param_speed(core_if, dwc_param_speed_default); -+ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, -+ dwc_param_host_ls_low_power_phy_clk_default); -+ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default); -+ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, -+ dwc_param_phy_ulpi_ext_vbus_default); -+ dwc_otg_set_param_phy_utmi_width(core_if, -+ dwc_param_phy_utmi_width_default); -+ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default); -+ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default); -+ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default); -+ dwc_otg_set_param_en_multiple_tx_fifo(core_if, -+ dwc_param_en_multiple_tx_fifo_default); -+ for (i = 0; i < 15; i++) { -+ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, -+ dwc_param_dev_perio_tx_fifo_size_default, -+ i); -+ } -+ -+ for (i = 0; i < 15; i++) { -+ dwc_otg_set_param_dev_tx_fifo_size(core_if, -+ dwc_param_dev_tx_fifo_size_default, -+ i); -+ } -+ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default); -+ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default); -+ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default); -+ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default); -+ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default); -+ dwc_otg_set_param_tx_thr_length(core_if, -+ dwc_param_tx_thr_length_default); -+ dwc_otg_set_param_rx_thr_length(core_if, -+ dwc_param_rx_thr_length_default); -+ dwc_otg_set_param_ahb_thr_ratio(core_if, -+ dwc_param_ahb_thr_ratio_default); -+ dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default); -+ dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default); -+ dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default); -+ dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default); -+ dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default); -+ dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default); -+ dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default); -+ DWC_PRINTF("Finished setting default values for core params\n"); -+ -+ return 0; -+} -+ -+uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->dma_enable; -+} -+ -+/* Checks if the parameter is outside of its valid range of values */ -+#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ -+ (((_param_) < (_low_)) || \ -+ ((_param_) > (_high_))) -+ -+/* Parameter access functions */ -+int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int valid; -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { -+ DWC_WARN("Wrong value for otg_cap parameter\n"); -+ DWC_WARN("otg_cap parameter must be 0,1 or 2\n"); -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ valid = 1; -+ switch (val) { -+ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: -+ if (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ valid = 0; -+ break; -+ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: -+ if ((core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ && (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) -+ && (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) -+ && (core_if->hwcfg2.b.op_mode != -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { -+ valid = 0; -+ } -+ break; -+ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: -+ /* always valid */ -+ break; -+ } -+ if (!valid) { -+ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) { -+ DWC_ERROR -+ ("%d invalid for otg_cap paremter. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (((core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) -+ || (core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) -+ || (core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) -+ || (core_if->hwcfg2.b.op_mode == -+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? -+ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : -+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->otg_cap = val; -+out: -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->otg_cap; -+} -+ -+int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for opt parameter\n"); -+ return -DWC_E_INVALID; -+ } -+ core_if->core_params->opt = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->opt; -+} -+ -+int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for dma enable\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) { -+ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) { -+ DWC_ERROR -+ ("%d invalid for dma_enable paremter. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dma_enable = val; -+ if (val == 0) { -+ dwc_otg_set_param_dma_desc_enable(core_if, 0); -+ } -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dma_enable; -+} -+ -+int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for dma_enable\n"); -+ DWC_WARN("dma_desc_enable must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) -+ && ((dwc_otg_get_param_dma_enable(core_if) == 0) -+ || (core_if->hwcfg4.b.desc_dma == 0))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dma_desc_enable)) { -+ DWC_ERROR -+ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ core_if->core_params->dma_desc_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dma_desc_enable; -+} -+ -+int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for host_support_fs_low_power\n"); -+ DWC_WARN("host_support_fs_low_power must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ core_if->core_params->host_support_fs_ls_low_power = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * -+ core_if) -+{ -+ return core_if->core_params->host_support_fs_ls_low_power; -+} -+ -+int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for enable_dynamic_fifo\n"); -+ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->enable_dynamic_fifo)) { -+ DWC_ERROR -+ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ core_if->core_params->enable_dynamic_fifo = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->enable_dynamic_fifo; -+} -+ -+int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) { -+ DWC_WARN("Wrong value for data_fifo_size\n"); -+ DWC_WARN("data_fifo_size must be 32-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > core_if->hwcfg3.b.dfifo_depth) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->data_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n", -+ val); -+ } -+ val = core_if->hwcfg3.b.dfifo_depth; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->data_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->data_fifo_size; -+} -+ -+int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for dev_rx_fifo_size\n"); -+ DWC_WARN("dev_rx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { -+ if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) { -+ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val); -+ } -+ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_rx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_rx_fifo_size; -+} -+ -+int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n"); -+ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_nperio_tx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> -+ 16); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_nperio_tx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_nperio_tx_fifo_size; -+} -+ -+int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for host_rx_fifo_size\n"); -+ DWC_WARN("host_rx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_rx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_rx_fifo_size = val; -+ return retval; -+ -+} -+ -+int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_rx_fifo_size; -+} -+ -+int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n"); -+ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_nperio_tx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> -+ 16); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_nperio_tx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_nperio_tx_fifo_size; -+} -+ -+int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) { -+ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n"); -+ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > ((core_if->hptxfsiz.d32) >> 16)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_perio_tx_fifo_size)) { -+ DWC_ERROR -+ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n", -+ val); -+ } -+ val = (core_if->hptxfsiz.d32) >> 16; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_perio_tx_fifo_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_perio_tx_fifo_size; -+} -+ -+int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) { -+ DWC_WARN("Wrong value for max_transfer_size\n"); -+ DWC_WARN("max_transfer_size must be 2047-524288\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->max_transfer_size)) { -+ DWC_ERROR -+ ("%d invalid for max_transfer_size. Check HW configuration.\n", -+ val); -+ } -+ val = -+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) - -+ 1); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->max_transfer_size = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->max_transfer_size; -+} -+ -+int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 15, 511)) { -+ DWC_WARN("Wrong value for max_packet_count\n"); -+ DWC_WARN("max_packet_count must be 15-511\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->max_packet_count)) { -+ DWC_ERROR -+ ("%d invalid for max_packet_count. Check HW configuration.\n", -+ val); -+ } -+ val = -+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->max_packet_count = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->max_packet_count; -+} -+ -+int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 1, 16)) { -+ DWC_WARN("Wrong value for host_channels\n"); -+ DWC_WARN("host_channels must be 1-16\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_channels)) { -+ DWC_ERROR -+ ("%d invalid for host_channels. Check HW configurations.\n", -+ val); -+ } -+ val = (core_if->hwcfg2.b.num_host_chan + 1); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_channels = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_channels; -+} -+ -+int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 1, 15)) { -+ DWC_WARN("Wrong value for dev_endpoints\n"); -+ DWC_WARN("dev_endpoints must be 1-15\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > (core_if->hwcfg2.b.num_dev_ep)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_endpoints)) { -+ DWC_ERROR -+ ("%d invalid for dev_endpoints. Check HW configurations.\n", -+ val); -+ } -+ val = core_if->hwcfg2.b.num_dev_ep; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_endpoints = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_endpoints; -+} -+ -+int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 2)) { -+ DWC_WARN("Wrong value for phy_type\n"); -+ DWC_WARN("phy_type must be 0,1 or 2\n"); -+ return -DWC_E_INVALID; -+ } -+#ifndef NO_FS_PHY_HW_CHECKS -+ if ((val == DWC_PHY_TYPE_PARAM_UTMI) && -+ ((core_if->hwcfg2.b.hs_phy_type == 1) || -+ (core_if->hwcfg2.b.hs_phy_type == 3))) { -+ valid = 1; -+ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) && -+ ((core_if->hwcfg2.b.hs_phy_type == 2) || -+ (core_if->hwcfg2.b.hs_phy_type == 3))) { -+ valid = 1; -+ } else if ((val == DWC_PHY_TYPE_PARAM_FS) && -+ (core_if->hwcfg2.b.fs_phy_type == 1)) { -+ valid = 1; -+ } -+ if (!valid) { -+ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) { -+ DWC_ERROR -+ ("%d invalid for phy_type. Check HW configurations.\n", -+ val); -+ } -+ if (core_if->hwcfg2.b.hs_phy_type) { -+ if ((core_if->hwcfg2.b.hs_phy_type == 3) || -+ (core_if->hwcfg2.b.hs_phy_type == 1)) { -+ val = DWC_PHY_TYPE_PARAM_UTMI; -+ } else { -+ val = DWC_PHY_TYPE_PARAM_ULPI; -+ } -+ } -+ retval = -DWC_E_INVALID; -+ } -+#endif -+ core_if->core_params->phy_type = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_type; -+} -+ -+int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for speed parameter\n"); -+ DWC_WARN("max_speed parameter must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ if ((val == 0) -+ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) { -+ if (dwc_otg_param_initialized(core_if->core_params->speed)) { -+ DWC_ERROR -+ ("%d invalid for speed paremter. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (dwc_otg_get_param_phy_type(core_if) == -+ DWC_PHY_TYPE_PARAM_FS ? 1 : 0); -+ retval = -DWC_E_INVALID; -+ } -+ core_if->core_params->speed = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->speed; -+} -+ -+int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN -+ ("Wrong value for host_ls_low_power_phy_clk parameter\n"); -+ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) -+ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->host_ls_low_power_phy_clk)) { -+ DWC_ERROR -+ ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n", -+ val); -+ } -+ val = -+ (dwc_otg_get_param_phy_type(core_if) == -+ DWC_PHY_TYPE_PARAM_FS) ? -+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : -+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->host_ls_low_power_phy_clk = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->host_ls_low_power_phy_clk; -+} -+ -+int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for phy_ulpi_ddr\n"); -+ DWC_WARN("phy_upli_ddr must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->phy_ulpi_ddr = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_ulpi_ddr; -+} -+ -+int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n"); -+ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->phy_ulpi_ext_vbus = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_ulpi_ext_vbus; -+} -+ -+int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) { -+ DWC_WARN("Wrong valaue for phy_utmi_width\n"); -+ DWC_WARN("phy_utmi_width must be 8 or 16\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->phy_utmi_width = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->phy_utmi_width; -+} -+ -+int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for ulpi_fs_ls\n"); -+ DWC_WARN("ulpi_fs_ls must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->ulpi_fs_ls = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ulpi_fs_ls; -+} -+ -+int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for ts_dline\n"); -+ DWC_WARN("ts_dline must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->ts_dline = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ts_dline; -+} -+ -+int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for i2c_enable\n"); -+ DWC_WARN("i2c_enable must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+#ifndef NO_FS_PHY_HW_CHECK -+ if (val == 1 && core_if->hwcfg3.b.i2c == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) { -+ DWC_ERROR -+ ("%d invalid for i2c_enable. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+#endif -+ -+ core_if->core_params->i2c_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->i2c_enable; -+} -+ -+int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val, int fifo_num) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { -+ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n"); -+ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > -+ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) { -+ DWC_ERROR -+ ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", -+ val, fifo_num); -+ } -+ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num) -+{ -+ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num]; -+} -+ -+int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n"); -+ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->en_multiple_tx_fifo)) { -+ DWC_ERROR -+ ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->en_multiple_tx_fifo = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->en_multiple_tx_fifo; -+} -+ -+int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val, -+ int fifo_num) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 4, 768)) { -+ DWC_WARN("Wrong value for dev_tx_fifo_size\n"); -+ DWC_WARN("dev_tx_fifo_size must be 4-768\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val > -+ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->dev_tx_fifo_size[fifo_num])) { -+ DWC_ERROR -+ ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n", -+ val, fifo_num); -+ } -+ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num])); -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->dev_tx_fifo_size[fifo_num] = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num) -+{ -+ return core_if->core_params->dev_tx_fifo_size[fifo_num]; -+} -+ -+int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 7)) { -+ DWC_WARN("Wrong value for thr_ctl\n"); -+ DWC_WARN("thr_ctl must be 0-7\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val != 0) && -+ (!dwc_otg_get_param_dma_enable(core_if) || -+ !core_if->hwcfg4.b.ded_fifo_en)) { -+ if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) { -+ DWC_ERROR -+ ("%d invalid for parameter thr_ctl. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->thr_ctl = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->thr_ctl; -+} -+ -+int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("Wrong value for lpm_enable\n"); -+ DWC_WARN("lpm_enable must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val && !core_if->hwcfg3.b.otg_lpm_en) { -+ if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter lpm_enable. Check HW configuration.\n", -+ val); -+ } -+ val = 0; -+ retval = -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->lpm_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->lpm_enable; -+} -+ -+int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { -+ DWC_WARN("Wrong valaue for tx_thr_length\n"); -+ DWC_WARN("tx_thr_length must be 8 - 128\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->tx_thr_length = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->tx_thr_length; -+} -+ -+int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 8, 128)) { -+ DWC_WARN("Wrong valaue for rx_thr_length\n"); -+ DWC_WARN("rx_thr_length must be 8 - 128\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->rx_thr_length = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->rx_thr_length; -+} -+ -+int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ if (DWC_OTG_PARAM_TEST(val, 1, 1) && -+ DWC_OTG_PARAM_TEST(val, 4, 4) && -+ DWC_OTG_PARAM_TEST(val, 8, 8) && -+ DWC_OTG_PARAM_TEST(val, 16, 16) && -+ DWC_OTG_PARAM_TEST(val, 32, 32) && -+ DWC_OTG_PARAM_TEST(val, 64, 64) && -+ DWC_OTG_PARAM_TEST(val, 128, 128) && -+ DWC_OTG_PARAM_TEST(val, 256, 256)) { -+ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val); -+ return -DWC_E_INVALID; -+ } -+ core_if->core_params->dma_burst_size = val; -+ return 0; -+} -+ -+int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dma_burst_size; -+} -+ -+int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val); -+ return -DWC_E_INVALID; -+ } -+ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) { -+ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter pti_enable. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->pti_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->pti_enable; -+} -+ -+int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val); -+ return -DWC_E_INVALID; -+ } -+ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) { -+ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter mpi_enable. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->mpi_enable = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->mpi_enable; -+} -+ -+int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val); -+ return -DWC_E_INVALID; -+ } -+ if (val && (core_if->hwcfg3.b.adp_supp == 0)) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->adp_supp_enable)) { -+ DWC_ERROR -+ ("%d invalid for parameter adp_enable. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->adp_supp_enable = val; -+ /*Set OTG version 2.0 in case of enabling ADP*/ -+ if (val) -+ dwc_otg_set_param_otg_ver(core_if, 1); -+ -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->adp_supp_enable; -+} -+ -+int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val); -+ DWC_WARN("ic_usb_cap must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) { -+ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) { -+ DWC_ERROR -+ ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->ic_usb_cap = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ic_usb_cap; -+} -+ -+int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { -+ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val); -+ DWC_WARN("ahb_thr_ratio must be 0 - 3\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (val -+ && (core_if->snpsid < OTG_CORE_REV_2_81a -+ || !dwc_otg_get_param_thr_ctl(core_if))) { -+ valid = 0; -+ } else if (val -+ && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) < -+ 4)) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized -+ (core_if->core_params->ahb_thr_ratio)) { -+ DWC_ERROR -+ ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ -+ core_if->core_params->ahb_thr_ratio = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ahb_thr_ratio; -+} -+ -+int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ hwcfg4_data_t hwcfg4 = {.d32 = 0 }; -+ hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4); -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 3)) { -+ DWC_WARN("`%d' invalid for parameter `power_down'\n", val); -+ DWC_WARN("power_down must be 0 - 2\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) { -+ valid = 0; -+ } -+ if ((val == 3) -+ && ((core_if->snpsid < OTG_CORE_REV_3_00a) -+ || (hwcfg4.b.xhiber == 0))) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->power_down)) { -+ DWC_ERROR -+ ("%d invalid for parameter power_down. Check HW configuration.\n", -+ val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->power_down = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->power_down; -+} -+ -+int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val); -+ DWC_WARN("reload_ctl must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) { -+ DWC_ERROR("%d invalid for parameter reload_ctl." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->reload_ctl = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->reload_ctl; -+} -+ -+int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val); -+ DWC_WARN("dev_out_nak must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) || -+ !(core_if->core_params->dma_desc_enable))) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) { -+ DWC_ERROR("%d invalid for parameter dev_out_nak." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->dev_out_nak = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->dev_out_nak; -+} -+ -+int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val); -+ DWC_WARN("cont_on_bna must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) || -+ !(core_if->core_params->dma_desc_enable))) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) { -+ DWC_ERROR("%d invalid for parameter cont_on_bna." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->cont_on_bna = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->cont_on_bna; -+} -+ -+int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ int valid = 1; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val); -+ DWC_WARN("ahb_single must be 0 or 1\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) { -+ valid = 0; -+ } -+ if (valid == 0) { -+ if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) { -+ DWC_ERROR("%d invalid for parameter ahb_single." -+ "Check HW configuration.\n", val); -+ } -+ retval = -DWC_E_INVALID; -+ val = 0; -+ } -+ core_if->core_params->ahb_single = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->ahb_single; -+} -+ -+int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val) -+{ -+ int retval = 0; -+ -+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) { -+ DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val); -+ DWC_WARN -+ ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ core_if->core_params->otg_ver = val; -+ return retval; -+} -+ -+int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->core_params->otg_ver; -+} -+ -+uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if) -+{ -+ gotgctl_data_t otgctl; -+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ return otgctl.b.hstnegscs; -+} -+ -+uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if) -+{ -+ gotgctl_data_t otgctl; -+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ return otgctl.b.sesreqscs; -+} -+ -+void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ if(core_if->otg_ver == 0) { -+ gotgctl_data_t otgctl; -+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ otgctl.b.hnpreq = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32); -+ } else { -+ core_if->otg_sts = val; -+ } -+} -+ -+uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->snpsid; -+} -+ -+uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ return gintsts.b.curmode; -+} -+ -+uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ return usbcfg.b.hnpcap; -+} -+ -+void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ usbcfg.b.hnpcap = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); -+} -+ -+uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ return usbcfg.b.srpcap; -+} -+ -+void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ gusbcfg_data_t usbcfg; -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ usbcfg.b.srpcap = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32); -+} -+ -+uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if) -+{ -+ dcfg_data_t dcfg; -+ /* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */ -+ -+ dcfg.d32 = -1; //GRAYG -+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if); -+ if (NULL == core_if) -+ DWC_ERROR("reg request with NULL core_if\n"); -+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__, -+ core_if, core_if->dev_if); -+ if (NULL == core_if->dev_if) -+ DWC_ERROR("reg request with NULL dev_if\n"); -+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->" -+ "dev_global_regs(%p)\n", __func__, -+ core_if, core_if->dev_if, -+ core_if->dev_if->dev_global_regs); -+ if (NULL == core_if->dev_if->dev_global_regs) -+ DWC_ERROR("reg request with NULL dev_global_regs\n"); -+ else { -+ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->" -+ "dev_global_regs(%p)->dcfg = %p\n", __func__, -+ core_if, core_if->dev_if, -+ core_if->dev_if->dev_global_regs, -+ &core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ } -+ return dcfg.b.devspd; -+} -+ -+void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ dcfg_data_t dcfg; -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ dcfg.b.devspd = val; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); -+} -+ -+uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ return hprt0.b.prtconnsts; -+} -+ -+uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ return dsts.b.enumspd; -+} -+ -+uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ return hprt0.b.prtpwr; -+ -+} -+ -+uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if) -+{ -+ return core_if->hibernation_suspend; -+} -+ -+void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = val; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+} -+ -+uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ return hprt0.b.prtsusp; -+ -+} -+ -+void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = val; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+} -+ -+uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if) -+{ -+ hfir_data_t hfir; -+ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); -+ return hfir.b.frint; -+ -+} -+ -+void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hfir_data_t hfir; -+ uint32_t fram_int; -+ fram_int = calc_frame_interval(core_if); -+ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir); -+ if (!core_if->core_params->reload_ctl) { -+ DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is" -+ "not set to 1.\nShould load driver with reload_ctl=1" -+ " module parameter\n"); -+ return; -+ } -+ switch (fram_int) { -+ case 3750: -+ if ((val < 3350) || (val > 4150)) { -+ DWC_WARN("HFIR interval for HS core and 30 MHz" -+ "clock freq should be from 3350 to 4150\n"); -+ return; -+ } -+ break; -+ case 30000: -+ if ((val < 26820) || (val > 33180)) { -+ DWC_WARN("HFIR interval for FS/LS core and 30 MHz" -+ "clock freq should be from 26820 to 33180\n"); -+ return; -+ } -+ break; -+ case 6000: -+ if ((val < 5360) || (val > 6640)) { -+ DWC_WARN("HFIR interval for HS core and 48 MHz" -+ "clock freq should be from 5360 to 6640\n"); -+ return; -+ } -+ break; -+ case 48000: -+ if ((val < 42912) || (val > 53088)) { -+ DWC_WARN("HFIR interval for FS/LS core and 48 MHz" -+ "clock freq should be from 42912 to 53088\n"); -+ return; -+ } -+ break; -+ case 7500: -+ if ((val < 6700) || (val > 8300)) { -+ DWC_WARN("HFIR interval for HS core and 60 MHz" -+ "clock freq should be from 6700 to 8300\n"); -+ return; -+ } -+ break; -+ case 60000: -+ if ((val < 53640) || (val > 65536)) { -+ DWC_WARN("HFIR interval for FS/LS core and 60 MHz" -+ "clock freq should be from 53640 to 65536\n"); -+ return; -+ } -+ break; -+ default: -+ DWC_WARN("Unknown frame interval\n"); -+ return; -+ break; -+ -+ } -+ hfir.b.frint = val; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32); -+} -+ -+uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if) -+{ -+ hcfg_data_t hcfg; -+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ return hcfg.b.modechtimen; -+ -+} -+ -+void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hcfg_data_t hcfg; -+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg); -+ hcfg.b.modechtimen = val; -+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+} -+ -+void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtres = val; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+} -+ -+uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if) -+{ -+ dctl_data_t dctl; -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ return dctl.b.rmtwkupsig; -+} -+ -+uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ -+ DWC_ASSERT(! -+ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts), -+ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n", -+ core_if->lx_state, lpmcfg.b.prt_sleep_sts); -+ -+ return lpmcfg.b.prt_sleep_sts; -+} -+ -+uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.rem_wkup_en; -+} -+ -+uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.appl_resp; -+} -+ -+void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.appl_resp = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+} -+ -+uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.hsic_connect; -+} -+ -+void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.hsic_connect = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+} -+ -+uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ return lpmcfg.b.inv_sel_hsic; -+ -+} -+ -+void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.inv_sel_hsic = val; -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+} -+ -+uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+} -+ -+void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val); -+} -+ -+uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+} -+ -+void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val); -+} -+ -+uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+} -+ -+void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val); -+} -+ -+uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz); -+} -+ -+void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val); -+} -+ -+uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl); -+} -+ -+void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val); -+} -+ -+uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->ggpio); -+} -+ -+void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val); -+} -+ -+uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(core_if->host_if->hprt0); -+ -+} -+ -+void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(core_if->host_if->hprt0, val); -+} -+ -+uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->guid); -+} -+ -+void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val) -+{ -+ DWC_WRITE_REG32(&core_if->core_global_regs->guid, val); -+} -+ -+uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if) -+{ -+ return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz); -+} -+ -+uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if) -+{ -+ return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103); -+} -+ -+/** -+ * Start the SRP timer to detect when the SRP does not complete within -+ * 6 seconds. -+ * -+ * @param core_if the pointer to core_if strucure. -+ */ -+void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if) -+{ -+ core_if->srp_timer_started = 1; -+ DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ ); -+} -+ -+void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl); -+ gotgctl_data_t mem; -+ gotgctl_data_t val; -+ -+ val.d32 = DWC_READ_REG32(addr); -+ if (val.b.sesreq) { -+ DWC_ERROR("Session Request Already active!\n"); -+ return; -+ } -+ -+ DWC_INFO("Session Request Initated\n"); //NOTICE -+ mem.d32 = DWC_READ_REG32(addr); -+ mem.b.sesreq = 1; -+ DWC_WRITE_REG32(addr, mem.d32); -+ -+ /* Start the SRP timer */ -+ dwc_otg_pcd_start_srp_timer(core_if); -+ return; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h -@@ -0,0 +1,1464 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ -+ * $Revision: #123 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#if !defined(__DWC_CIL_H__) -+#define __DWC_CIL_H__ -+ -+#include "dwc_list.h" -+#include "dwc_otg_dbg.h" -+#include "dwc_otg_regs.h" -+ -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_adp.h" -+ -+/** -+ * @file -+ * This file contains the interface to the Core Interface Layer. -+ */ -+ -+#ifdef DWC_UTE_CFI -+ -+#define MAX_DMA_DESCS_PER_EP 256 -+ -+/** -+ * Enumeration for the data buffer mode -+ */ -+typedef enum _data_buffer_mode { -+ BM_STANDARD = 0, /* data buffer is in normal mode */ -+ BM_SG = 1, /* data buffer uses the scatter/gather mode */ -+ BM_CONCAT = 2, /* data buffer uses the concatenation mode */ -+ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */ -+ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */ -+} data_buffer_mode_e; -+#endif //DWC_UTE_CFI -+ -+/** Macros defined for DWC OTG HW Release version */ -+ -+#define OTG_CORE_REV_2_60a 0x4F54260A -+#define OTG_CORE_REV_2_71a 0x4F54271A -+#define OTG_CORE_REV_2_72a 0x4F54272A -+#define OTG_CORE_REV_2_80a 0x4F54280A -+#define OTG_CORE_REV_2_81a 0x4F54281A -+#define OTG_CORE_REV_2_90a 0x4F54290A -+#define OTG_CORE_REV_2_91a 0x4F54291A -+#define OTG_CORE_REV_2_92a 0x4F54292A -+#define OTG_CORE_REV_2_93a 0x4F54293A -+#define OTG_CORE_REV_2_94a 0x4F54294A -+#define OTG_CORE_REV_3_00a 0x4F54300A -+ -+/** -+ * Information for each ISOC packet. -+ */ -+typedef struct iso_pkt_info { -+ uint32_t offset; -+ uint32_t length; -+ int32_t status; -+} iso_pkt_info_t; -+ -+/** -+ * The <code>dwc_ep</code> structure represents the state of a single -+ * endpoint when acting in device mode. It contains the data items -+ * needed for an endpoint to be activated and transfer packets. -+ */ -+typedef struct dwc_ep { -+ /** EP number used for register address lookup */ -+ uint8_t num; -+ /** EP direction 0 = OUT */ -+ unsigned is_in:1; -+ /** EP active. */ -+ unsigned active:1; -+ -+ /** -+ * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic -+ * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/ -+ unsigned tx_fifo_num:4; -+ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ -+ unsigned type:2; -+#define DWC_OTG_EP_TYPE_CONTROL 0 -+#define DWC_OTG_EP_TYPE_ISOC 1 -+#define DWC_OTG_EP_TYPE_BULK 2 -+#define DWC_OTG_EP_TYPE_INTR 3 -+ -+ /** DATA start PID for INTR and BULK EP */ -+ unsigned data_pid_start:1; -+ /** Frame (even/odd) for ISOC EP */ -+ unsigned even_odd_frame:1; -+ /** Max Packet bytes */ -+ unsigned maxpacket:11; -+ -+ /** Max Transfer size */ -+ uint32_t maxxfer; -+ -+ /** @name Transfer state */ -+ /** @{ */ -+ -+ /** -+ * Pointer to the beginning of the transfer buffer -- do not modify -+ * during transfer. -+ */ -+ -+ dwc_dma_t dma_addr; -+ -+ dwc_dma_t dma_desc_addr; -+ dwc_otg_dev_dma_desc_t *desc_addr; -+ -+ uint8_t *start_xfer_buff; -+ /** pointer to the transfer buffer */ -+ uint8_t *xfer_buff; -+ /** Number of bytes to transfer */ -+ unsigned xfer_len:19; -+ /** Number of bytes transferred. */ -+ unsigned xfer_count:19; -+ /** Sent ZLP */ -+ unsigned sent_zlp:1; -+ /** Total len for control transfer */ -+ unsigned total_len:19; -+ -+ /** stall clear flag */ -+ unsigned stall_clear_flag:1; -+ -+ /** SETUP pkt cnt rollover flag for EP0 out*/ -+ unsigned stp_rollover; -+ -+#ifdef DWC_UTE_CFI -+ /* The buffer mode */ -+ data_buffer_mode_e buff_mode; -+ -+ /* The chain of DMA descriptors. -+ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP. -+ */ -+ dwc_otg_dma_desc_t *descs; -+ -+ /* The DMA address of the descriptors chain start */ -+ dma_addr_t descs_dma_addr; -+ /** This variable stores the length of the last enqueued request */ -+ uint32_t cfi_req_len; -+#endif //DWC_UTE_CFI -+ -+/** Max DMA Descriptor count for any EP */ -+#define MAX_DMA_DESC_CNT 256 -+ /** Allocated DMA Desc count */ -+ uint32_t desc_cnt; -+ -+ /** bInterval */ -+ uint32_t bInterval; -+ /** Next frame num to setup next ISOC transfer */ -+ uint32_t frame_num; -+ /** Indicates SOF number overrun in DSTS */ -+ uint8_t frm_overrun; -+ -+#ifdef DWC_UTE_PER_IO -+ /** Next frame num for which will be setup DMA Desc */ -+ uint32_t xiso_frame_num; -+ /** bInterval */ -+ uint32_t xiso_bInterval; -+ /** Count of currently active transfers - shall be either 0 or 1 */ -+ int xiso_active_xfers; -+ int xiso_queued_xfers; -+#endif -+#ifdef DWC_EN_ISOC -+ /** -+ * Variables specific for ISOC EPs -+ * -+ */ -+ /** DMA addresses of ISOC buffers */ -+ dwc_dma_t dma_addr0; -+ dwc_dma_t dma_addr1; -+ -+ dwc_dma_t iso_dma_desc_addr; -+ dwc_otg_dev_dma_desc_t *iso_desc_addr; -+ -+ /** pointer to the transfer buffers */ -+ uint8_t *xfer_buff0; -+ uint8_t *xfer_buff1; -+ -+ /** number of ISOC Buffer is processing */ -+ uint32_t proc_buf_num; -+ /** Interval of ISOC Buffer processing */ -+ uint32_t buf_proc_intrvl; -+ /** Data size for regular frame */ -+ uint32_t data_per_frame; -+ -+ /* todo - pattern data support is to be implemented in the future */ -+ /** Data size for pattern frame */ -+ uint32_t data_pattern_frame; -+ /** Frame number of pattern data */ -+ uint32_t sync_frame; -+ -+ /** bInterval */ -+ uint32_t bInterval; -+ /** ISO Packet number per frame */ -+ uint32_t pkt_per_frm; -+ /** Next frame num for which will be setup DMA Desc */ -+ uint32_t next_frame; -+ /** Number of packets per buffer processing */ -+ uint32_t pkt_cnt; -+ /** Info for all isoc packets */ -+ iso_pkt_info_t *pkt_info; -+ /** current pkt number */ -+ uint32_t cur_pkt; -+ /** current pkt number */ -+ uint8_t *cur_pkt_addr; -+ /** current pkt number */ -+ uint32_t cur_pkt_dma_addr; -+#endif /* DWC_EN_ISOC */ -+ -+/** @} */ -+} dwc_ep_t; -+ -+/* -+ * Reasons for halting a host channel. -+ */ -+typedef enum dwc_otg_halt_status { -+ DWC_OTG_HC_XFER_NO_HALT_STATUS, -+ DWC_OTG_HC_XFER_COMPLETE, -+ DWC_OTG_HC_XFER_URB_COMPLETE, -+ DWC_OTG_HC_XFER_ACK, -+ DWC_OTG_HC_XFER_NAK, -+ DWC_OTG_HC_XFER_NYET, -+ DWC_OTG_HC_XFER_STALL, -+ DWC_OTG_HC_XFER_XACT_ERR, -+ DWC_OTG_HC_XFER_FRAME_OVERRUN, -+ DWC_OTG_HC_XFER_BABBLE_ERR, -+ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, -+ DWC_OTG_HC_XFER_AHB_ERR, -+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, -+ DWC_OTG_HC_XFER_URB_DEQUEUE -+} dwc_otg_halt_status_e; -+ -+/** -+ * Host channel descriptor. This structure represents the state of a single -+ * host channel when acting in host mode. It contains the data items needed to -+ * transfer packets to an endpoint via a host channel. -+ */ -+typedef struct dwc_hc { -+ /** Host channel number used for register address lookup */ -+ uint8_t hc_num; -+ -+ /** Device to access */ -+ unsigned dev_addr:7; -+ -+ /** EP to access */ -+ unsigned ep_num:4; -+ -+ /** EP direction. 0: OUT, 1: IN */ -+ unsigned ep_is_in:1; -+ -+ /** -+ * EP speed. -+ * One of the following values: -+ * - DWC_OTG_EP_SPEED_LOW -+ * - DWC_OTG_EP_SPEED_FULL -+ * - DWC_OTG_EP_SPEED_HIGH -+ */ -+ unsigned speed:2; -+#define DWC_OTG_EP_SPEED_LOW 0 -+#define DWC_OTG_EP_SPEED_FULL 1 -+#define DWC_OTG_EP_SPEED_HIGH 2 -+ -+ /** -+ * Endpoint type. -+ * One of the following values: -+ * - DWC_OTG_EP_TYPE_CONTROL: 0 -+ * - DWC_OTG_EP_TYPE_ISOC: 1 -+ * - DWC_OTG_EP_TYPE_BULK: 2 -+ * - DWC_OTG_EP_TYPE_INTR: 3 -+ */ -+ unsigned ep_type:2; -+ -+ /** Max packet size in bytes */ -+ unsigned max_packet:11; -+ -+ /** -+ * PID for initial transaction. -+ * 0: DATA0,<br> -+ * 1: DATA2,<br> -+ * 2: DATA1,<br> -+ * 3: MDATA (non-Control EP), -+ * SETUP (Control EP) -+ */ -+ unsigned data_pid_start:2; -+#define DWC_OTG_HC_PID_DATA0 0 -+#define DWC_OTG_HC_PID_DATA2 1 -+#define DWC_OTG_HC_PID_DATA1 2 -+#define DWC_OTG_HC_PID_MDATA 3 -+#define DWC_OTG_HC_PID_SETUP 3 -+ -+ /** Number of periodic transactions per (micro)frame */ -+ unsigned multi_count:2; -+ -+ /** @name Transfer State */ -+ /** @{ */ -+ -+ /** Pointer to the current transfer buffer position. */ -+ uint8_t *xfer_buff; -+ /** -+ * In Buffer DMA mode this buffer will be used -+ * if xfer_buff is not DWORD aligned. -+ */ -+ dwc_dma_t align_buff; -+ /** Total number of bytes to transfer. */ -+ uint32_t xfer_len; -+ /** Number of bytes transferred so far. */ -+ uint32_t xfer_count; -+ /** Packet count at start of transfer.*/ -+ uint16_t start_pkt_count; -+ -+ /** -+ * Flag to indicate whether the transfer has been started. Set to 1 if -+ * it has been started, 0 otherwise. -+ */ -+ uint8_t xfer_started; -+ -+ /** -+ * Set to 1 to indicate that a PING request should be issued on this -+ * channel. If 0, process normally. -+ */ -+ uint8_t do_ping; -+ -+ /** -+ * Set to 1 to indicate that the error count for this transaction is -+ * non-zero. Set to 0 if the error count is 0. -+ */ -+ uint8_t error_state; -+ -+ /** -+ * Set to 1 to indicate that this channel should be halted the next -+ * time a request is queued for the channel. This is necessary in -+ * slave mode if no request queue space is available when an attempt -+ * is made to halt the channel. -+ */ -+ uint8_t halt_on_queue; -+ -+ /** -+ * Set to 1 if the host channel has been halted, but the core is not -+ * finished flushing queued requests. Otherwise 0. -+ */ -+ uint8_t halt_pending; -+ -+ /** -+ * Reason for halting the host channel. -+ */ -+ dwc_otg_halt_status_e halt_status; -+ -+ /* -+ * Split settings for the host channel -+ */ -+ uint8_t do_split; /**< Enable split for the channel */ -+ uint8_t complete_split; /**< Enable complete split */ -+ uint8_t hub_addr; /**< Address of high speed hub */ -+ -+ uint8_t port_addr; /**< Port of the low/full speed device */ -+ /** Split transaction position -+ * One of the following values: -+ * - DWC_HCSPLIT_XACTPOS_MID -+ * - DWC_HCSPLIT_XACTPOS_BEGIN -+ * - DWC_HCSPLIT_XACTPOS_END -+ * - DWC_HCSPLIT_XACTPOS_ALL */ -+ uint8_t xact_pos; -+ -+ /** Set when the host channel does a short read. */ -+ uint8_t short_read; -+ -+ /** -+ * Number of requests issued for this channel since it was assigned to -+ * the current transfer (not counting PINGs). -+ */ -+ uint8_t requests; -+ -+ /** -+ * Queue Head for the transfer being processed by this channel. -+ */ -+ struct dwc_otg_qh *qh; -+ -+ /** @} */ -+ -+ /** Entry in list of host channels. */ -+ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry; -+ -+ /** @name Descriptor DMA support */ -+ /** @{ */ -+ -+ /** Number of Transfer Descriptors */ -+ uint16_t ntd; -+ -+ /** Descriptor List DMA address */ -+ dwc_dma_t desc_list_addr; -+ -+ /** Scheduling micro-frame bitmap. */ -+ uint8_t schinfo; -+ -+ /** @} */ -+} dwc_hc_t; -+ -+/** -+ * The following parameters may be specified when starting the module. These -+ * parameters define how the DWC_otg controller should be configured. -+ */ -+typedef struct dwc_otg_core_params { -+ int32_t opt; -+ -+ /** -+ * Specifies the OTG capabilities. The driver will automatically -+ * detect the value for this parameter if none is specified. -+ * 0 - HNP and SRP capable (default) -+ * 1 - SRP Only capable -+ * 2 - No HNP/SRP capable -+ */ -+ int32_t otg_cap; -+ -+ /** -+ * Specifies whether to use slave or DMA mode for accessing the data -+ * FIFOs. The driver will automatically detect the value for this -+ * parameter if none is specified. -+ * 0 - Slave -+ * 1 - DMA (default, if available) -+ */ -+ int32_t dma_enable; -+ -+ /** -+ * When DMA mode is enabled specifies whether to use address DMA or DMA -+ * Descriptor mode for accessing the data FIFOs in device mode. The driver -+ * will automatically detect the value for this if none is specified. -+ * 0 - address DMA -+ * 1 - DMA Descriptor(default, if available) -+ */ -+ int32_t dma_desc_enable; -+ /** The DMA Burst size (applicable only for External DMA -+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) -+ */ -+ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ -+ -+ /** -+ * Specifies the maximum speed of operation in host and device mode. -+ * The actual speed depends on the speed of the attached device and -+ * the value of phy_type. The actual speed depends on the speed of the -+ * attached device. -+ * 0 - High Speed (default) -+ * 1 - Full Speed -+ */ -+ int32_t speed; -+ /** Specifies whether low power mode is supported when attached -+ * to a Full Speed or Low Speed device in host mode. -+ * 0 - Don't support low power mode (default) -+ * 1 - Support low power mode -+ */ -+ int32_t host_support_fs_ls_low_power; -+ -+ /** Specifies the PHY clock rate in low power mode when connected to a -+ * Low Speed device in host mode. This parameter is applicable only if -+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS -+ * then defaults to 6 MHZ otherwise 48 MHZ. -+ * -+ * 0 - 48 MHz -+ * 1 - 6 MHz -+ */ -+ int32_t host_ls_low_power_phy_clk; -+ -+ /** -+ * 0 - Use cC FIFO size parameters -+ * 1 - Allow dynamic FIFO sizing (default) -+ */ -+ int32_t enable_dynamic_fifo; -+ -+ /** Total number of 4-byte words in the data FIFO memory. This -+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic -+ * Tx FIFOs. -+ * 32 to 32768 (default 8192) -+ * Note: The total FIFO memory depth in the FPGA configuration is 8192. -+ */ -+ int32_t data_fifo_size; -+ -+ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1064) -+ */ -+ int32_t dev_rx_fifo_size; -+ -+ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode -+ * when dynamic FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t dev_nperio_tx_fifo_size; -+ -+ /** Number of 4-byte words in each of the periodic Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; -+ -+ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t host_rx_fifo_size; -+ -+ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode -+ * when Dynamic FIFO sizing is enabled in the core. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t host_nperio_tx_fifo_size; -+ -+ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+ int32_t host_perio_tx_fifo_size; -+ -+ /** The maximum transfer size supported in bytes. -+ * 2047 to 65,535 (default 65,535) -+ */ -+ int32_t max_transfer_size; -+ -+ /** The maximum number of packets in a transfer. -+ * 15 to 511 (default 511) -+ */ -+ int32_t max_packet_count; -+ -+ /** The number of host channel registers to use. -+ * 1 to 16 (default 12) -+ * Note: The FPGA configuration supports a maximum of 12 host channels. -+ */ -+ int32_t host_channels; -+ -+ /** The number of endpoints in addition to EP0 available for device -+ * mode operations. -+ * 1 to 15 (default 6 IN and OUT) -+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT -+ * endpoints in addition to EP0. -+ */ -+ int32_t dev_endpoints; -+ -+ /** -+ * Specifies the type of PHY interface to use. By default, the driver -+ * will automatically detect the phy_type. -+ * -+ * 0 - Full Speed PHY -+ * 1 - UTMI+ (default) -+ * 2 - ULPI -+ */ -+ int32_t phy_type; -+ -+ /** -+ * Specifies the UTMI+ Data Width. This parameter is -+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI -+ * PHY_TYPE, this parameter indicates the data width between -+ * the MAC and the ULPI Wrapper.) Also, this parameter is -+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set -+ * to "8 and 16 bits", meaning that the core has been -+ * configured to work at either data path width. -+ * -+ * 8 or 16 bits (default 16) -+ */ -+ int32_t phy_utmi_width; -+ -+ /** -+ * Specifies whether the ULPI operates at double or single -+ * data rate. This parameter is only applicable if PHY_TYPE is -+ * ULPI. -+ * -+ * 0 - single data rate ULPI interface with 8 bit wide data -+ * bus (default) -+ * 1 - double data rate ULPI interface with 4 bit wide data -+ * bus -+ */ -+ int32_t phy_ulpi_ddr; -+ -+ /** -+ * Specifies whether to use the internal or external supply to -+ * drive the vbus with a ULPI phy. -+ */ -+ int32_t phy_ulpi_ext_vbus; -+ -+ /** -+ * Specifies whether to use the I2Cinterface for full speed PHY. This -+ * parameter is only applicable if PHY_TYPE is FS. -+ * 0 - No (default) -+ * 1 - Yes -+ */ -+ int32_t i2c_enable; -+ -+ int32_t ulpi_fs_ls; -+ -+ int32_t ts_dline; -+ -+ /** -+ * Specifies whether dedicated transmit FIFOs are -+ * enabled for non periodic IN endpoints in device mode -+ * 0 - No -+ * 1 - Yes -+ */ -+ int32_t en_multiple_tx_fifo; -+ -+ /** Number of 4-byte words in each of the Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; -+ -+ /** Thresholding enable flag- -+ * bit 0 - enable non-ISO Tx thresholding -+ * bit 1 - enable ISO Tx thresholding -+ * bit 2 - enable Rx thresholding -+ */ -+ uint32_t thr_ctl; -+ -+ /** Thresholding length for Tx -+ * FIFOs in 32 bit DWORDs -+ */ -+ uint32_t tx_thr_length; -+ -+ /** Thresholding length for Rx -+ * FIFOs in 32 bit DWORDs -+ */ -+ uint32_t rx_thr_length; -+ -+ /** -+ * Specifies whether LPM (Link Power Management) support is enabled -+ */ -+ int32_t lpm_enable; -+ -+ /** Per Transfer Interrupt -+ * mode enable flag -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t pti_enable; -+ -+ /** Multi Processor Interrupt -+ * mode enable flag -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t mpi_enable; -+ -+ /** IS_USB Capability -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t ic_usb_cap; -+ -+ /** AHB Threshold Ratio -+ * 2'b00 AHB Threshold = MAC Threshold -+ * 2'b01 AHB Threshold = 1/2 MAC Threshold -+ * 2'b10 AHB Threshold = 1/4 MAC Threshold -+ * 2'b11 AHB Threshold = 1/8 MAC Threshold -+ */ -+ int32_t ahb_thr_ratio; -+ -+ /** ADP Support -+ * 1 - Enabled -+ * 0 - Disabled -+ */ -+ int32_t adp_supp_enable; -+ -+ /** HFIR Reload Control -+ * 0 - The HFIR cannot be reloaded dynamically. -+ * 1 - Allow dynamic reloading of the HFIR register during runtime. -+ */ -+ int32_t reload_ctl; -+ -+ /** DCFG: Enable device Out NAK -+ * 0 - The core does not set NAK after Bulk Out transfer complete. -+ * 1 - The core sets NAK after Bulk OUT transfer complete. -+ */ -+ int32_t dev_out_nak; -+ -+ /** DCFG: Enable Continue on BNA -+ * After receiving BNA interrupt the core disables the endpoint,when the -+ * endpoint is re-enabled by the application the core starts processing -+ * 0 - from the DOEPDMA descriptor -+ * 1 - from the descriptor which received the BNA. -+ */ -+ int32_t cont_on_bna; -+ -+ /** GAHBCFG: AHB Single Support -+ * This bit when programmed supports SINGLE transfers for remainder -+ * data in a transfer for DMA mode of operation. -+ * 0 - in this case the remainder data will be sent using INCR burst size. -+ * 1 - in this case the remainder data will be sent using SINGLE burst size. -+ */ -+ int32_t ahb_single; -+ -+ /** Core Power down mode -+ * 0 - No Power Down is enabled -+ * 1 - Reserved -+ * 2 - Complete Power Down (Hibernation) -+ */ -+ int32_t power_down; -+ -+ /** OTG revision supported -+ * 0 - OTG 1.3 revision -+ * 1 - OTG 2.0 revision -+ */ -+ int32_t otg_ver; -+ -+} dwc_otg_core_params_t; -+ -+#ifdef DEBUG -+struct dwc_otg_core_if; -+typedef struct hc_xfer_info { -+ struct dwc_otg_core_if *core_if; -+ dwc_hc_t *hc; -+} hc_xfer_info_t; -+#endif -+ -+typedef struct ep_xfer_info { -+ struct dwc_otg_core_if *core_if; -+ dwc_ep_t *ep; -+ uint8_t state; -+} ep_xfer_info_t; -+/* -+ * Device States -+ */ -+typedef enum dwc_otg_lx_state { -+ /** On state */ -+ DWC_OTG_L0, -+ /** LPM sleep state*/ -+ DWC_OTG_L1, -+ /** USB suspend state*/ -+ DWC_OTG_L2, -+ /** Off state*/ -+ DWC_OTG_L3 -+} dwc_otg_lx_state_e; -+ -+struct dwc_otg_global_regs_backup { -+ uint32_t gotgctl_local; -+ uint32_t gintmsk_local; -+ uint32_t gahbcfg_local; -+ uint32_t gusbcfg_local; -+ uint32_t grxfsiz_local; -+ uint32_t gnptxfsiz_local; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ uint32_t glpmcfg_local; -+#endif -+ uint32_t gi2cctl_local; -+ uint32_t hptxfsiz_local; -+ uint32_t pcgcctl_local; -+ uint32_t gdfifocfg_local; -+ uint32_t dtxfsiz_local[MAX_EPS_CHANNELS]; -+ uint32_t gpwrdn_local; -+ uint32_t xhib_pcgcctl; -+ uint32_t xhib_gpwrdn; -+}; -+ -+struct dwc_otg_host_regs_backup { -+ uint32_t hcfg_local; -+ uint32_t haintmsk_local; -+ uint32_t hcintmsk_local[MAX_EPS_CHANNELS]; -+ uint32_t hprt0_local; -+ uint32_t hfir_local; -+}; -+ -+struct dwc_otg_dev_regs_backup { -+ uint32_t dcfg; -+ uint32_t dctl; -+ uint32_t daintmsk; -+ uint32_t diepmsk; -+ uint32_t doepmsk; -+ uint32_t diepctl[MAX_EPS_CHANNELS]; -+ uint32_t dieptsiz[MAX_EPS_CHANNELS]; -+ uint32_t diepdma[MAX_EPS_CHANNELS]; -+}; -+/** -+ * The <code>dwc_otg_core_if</code> structure contains information needed to manage -+ * the DWC_otg controller acting in either host or device mode. It -+ * represents the programming view of the controller as a whole. -+ */ -+struct dwc_otg_core_if { -+ /** Parameters that define how the core should be configured.*/ -+ dwc_otg_core_params_t *core_params; -+ -+ /** Core Global registers starting at offset 000h. */ -+ dwc_otg_core_global_regs_t *core_global_regs; -+ -+ /** Device-specific information */ -+ dwc_otg_dev_if_t *dev_if; -+ /** Host-specific information */ -+ dwc_otg_host_if_t *host_if; -+ -+ /** Value from SNPSID register */ -+ uint32_t snpsid; -+ -+ /* -+ * Set to 1 if the core PHY interface bits in USBCFG have been -+ * initialized. -+ */ -+ uint8_t phy_init_done; -+ -+ /* -+ * SRP Success flag, set by srp success interrupt in FS I2C mode -+ */ -+ uint8_t srp_success; -+ uint8_t srp_timer_started; -+ /** Timer for SRP. If it expires before SRP is successful -+ * clear the SRP. */ -+ dwc_timer_t *srp_timer; -+ -+#ifdef DWC_DEV_SRPCAP -+ /* This timer is needed to power on the hibernated host core if SRP is not -+ * initiated on connected SRP capable device for limited period of time -+ */ -+ uint8_t pwron_timer_started; -+ dwc_timer_t *pwron_timer; -+#endif -+ /* Common configuration information */ -+ /** Power and Clock Gating Control Register */ -+ volatile uint32_t *pcgcctl; -+#define DWC_OTG_PCGCCTL_OFFSET 0xE00 -+ -+ /** Push/pop addresses for endpoints or host channels.*/ -+ uint32_t *data_fifo[MAX_EPS_CHANNELS]; -+#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 -+#define DWC_OTG_DATA_FIFO_SIZE 0x1000 -+ -+ /** Total RAM for FIFOs (Bytes) */ -+ uint16_t total_fifo_size; -+ /** Size of Rx FIFO (Bytes) */ -+ uint16_t rx_fifo_size; -+ /** Size of Non-periodic Tx FIFO (Bytes) */ -+ uint16_t nperio_tx_fifo_size; -+ -+ /** 1 if DMA is enabled, 0 otherwise. */ -+ uint8_t dma_enable; -+ -+ /** 1 if DMA descriptor is enabled, 0 otherwise. */ -+ uint8_t dma_desc_enable; -+ -+ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ -+ uint8_t pti_enh_enable; -+ -+ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ -+ uint8_t multiproc_int_enable; -+ -+ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ -+ uint8_t en_multiple_tx_fifo; -+ -+ /** Set to 1 if multiple packets of a high-bandwidth transfer is in -+ * process of being queued */ -+ uint8_t queuing_high_bandwidth; -+ -+ /** Hardware Configuration -- stored here for convenience.*/ -+ hwcfg1_data_t hwcfg1; -+ hwcfg2_data_t hwcfg2; -+ hwcfg3_data_t hwcfg3; -+ hwcfg4_data_t hwcfg4; -+ fifosize_data_t hptxfsiz; -+ -+ /** Host and Device Configuration -- stored here for convenience.*/ -+ hcfg_data_t hcfg; -+ dcfg_data_t dcfg; -+ -+ /** The operational State, during transations -+ * (a_host>>a_peripherial and b_device=>b_host) this may not -+ * match the core but allows the software to determine -+ * transitions. -+ */ -+ uint8_t op_state; -+ -+ /** -+ * Set to 1 if the HCD needs to be restarted on a session request -+ * interrupt. This is required if no connector ID status change has -+ * occurred since the HCD was last disconnected. -+ */ -+ uint8_t restart_hcd_on_session_req; -+ -+ /** HCD callbacks */ -+ /** A-Device is a_host */ -+#define A_HOST (1) -+ /** A-Device is a_suspend */ -+#define A_SUSPEND (2) -+ /** A-Device is a_peripherial */ -+#define A_PERIPHERAL (3) -+ /** B-Device is operating as a Peripheral. */ -+#define B_PERIPHERAL (4) -+ /** B-Device is operating as a Host. */ -+#define B_HOST (5) -+ -+ /** HCD callbacks */ -+ struct dwc_otg_cil_callbacks *hcd_cb; -+ /** PCD callbacks */ -+ struct dwc_otg_cil_callbacks *pcd_cb; -+ -+ /** Device mode Periodic Tx FIFO Mask */ -+ uint32_t p_tx_msk; -+ /** Device mode Periodic Tx FIFO Mask */ -+ uint32_t tx_msk; -+ -+ /** Workqueue object used for handling several interrupts */ -+ dwc_workq_t *wq_otg; -+ -+ /** Timer object used for handling "Wakeup Detected" Interrupt */ -+ dwc_timer_t *wkp_timer; -+ /** This arrays used for debug purposes for DEV OUT NAK enhancement */ -+ uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS]; -+ ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS]; -+ dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS]; -+#ifdef DEBUG -+ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; -+ -+ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; -+ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS]; -+ -+ uint32_t hfnum_7_samples; -+ uint64_t hfnum_7_frrem_accum; -+ uint32_t hfnum_0_samples; -+ uint64_t hfnum_0_frrem_accum; -+ uint32_t hfnum_other_samples; -+ uint64_t hfnum_other_frrem_accum; -+#endif -+ -+#ifdef DWC_UTE_CFI -+ uint16_t pwron_rxfsiz; -+ uint16_t pwron_gnptxfsiz; -+ uint16_t pwron_txfsiz[15]; -+ -+ uint16_t init_rxfsiz; -+ uint16_t init_gnptxfsiz; -+ uint16_t init_txfsiz[15]; -+#endif -+ -+ /** Lx state of device */ -+ dwc_otg_lx_state_e lx_state; -+ -+ /** Saved Core Global registers */ -+ struct dwc_otg_global_regs_backup *gr_backup; -+ /** Saved Host registers */ -+ struct dwc_otg_host_regs_backup *hr_backup; -+ /** Saved Device registers */ -+ struct dwc_otg_dev_regs_backup *dr_backup; -+ -+ /** Power Down Enable */ -+ uint32_t power_down; -+ -+ /** ADP support Enable */ -+ uint32_t adp_enable; -+ -+ /** ADP structure object */ -+ dwc_otg_adp_t adp; -+ -+ /** hibernation/suspend flag */ -+ int hibernation_suspend; -+ -+ /** Device mode extended hibernation flag */ -+ int xhib; -+ -+ /** OTG revision supported */ -+ uint32_t otg_ver; -+ -+ /** OTG status flag used for HNP polling */ -+ uint8_t otg_sts; -+ -+ /** Pointer to either hcd->lock or pcd->lock */ -+ dwc_spinlock_t *lock; -+ -+ /** Start predict NextEP based on Learning Queue if equal 1, -+ * also used as counter of disabled NP IN EP's */ -+ uint8_t start_predict; -+ -+ /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and -+ * active, 0xff otherwise */ -+ uint8_t nextep_seq[MAX_EPS_CHANNELS]; -+ -+ /** Index of fisrt EP in nextep_seq array which should be re-enabled **/ -+ uint8_t first_in_nextep_seq; -+ -+ /** Frame number while entering to ISR - needed for ISOCs **/ -+ uint32_t frame_num; -+ -+}; -+ -+#ifdef DEBUG -+/* -+ * This function is called when transfer is timed out. -+ */ -+extern void hc_xfer_timeout(void *ptr); -+#endif -+ -+/* -+ * This function is called when transfer is timed out on endpoint. -+ */ -+extern void ep_xfer_timeout(void *ptr); -+ -+/* -+ * The following functions are functions for works -+ * using during handling some interrupts -+ */ -+extern void w_conn_id_status_change(void *p); -+ -+extern void w_wakeup_detected(void *p); -+ -+/** Saves global register values into system memory. */ -+extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if); -+/** Saves device register values into system memory. */ -+extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if); -+/** Saves host register values into system memory. */ -+extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if); -+/** Restore global register values. */ -+extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if); -+/** Restore host register values. */ -+extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset); -+/** Restore device register values. */ -+extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, -+ int rem_wakeup); -+extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if); -+extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, -+ int is_host); -+ -+extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int restore_mode, int reset); -+extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if, -+ int rem_wakeup, int reset); -+ -+/* -+ * The following functions support initialization of the CIL driver component -+ * and the DWC_otg controller. -+ */ -+extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if); -+ -+/** @name Device CIL Functions -+ * The following functions support managing the DWC_otg controller in device -+ * mode. -+ */ -+/**@{*/ -+extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if, -+ uint32_t * _dest); -+extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep, int _dma); -+extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep); -+extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if, -+ dwc_ep_t * _ep); -+extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if); -+ -+#ifdef DWC_EN_ISOC -+extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep); -+extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep); -+#endif /* DWC_EN_ISOC */ -+/**@}*/ -+ -+/** @name Host CIL Functions -+ * The following functions support managing the DWC_otg controller in host -+ * mode. -+ */ -+/**@{*/ -+extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); -+extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status); -+extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); -+extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc); -+extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc); -+extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc); -+extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if, -+ dwc_hc_t * _hc); -+extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if); -+ -+extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, -+ dwc_hc_t * hc); -+ -+extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if); -+ -+/* Macro used to clear one channel interrupt */ -+#define clear_hc_int(_hc_regs_, _intr_) \ -+do { \ -+ hcint_data_t hcint_clear = {.d32 = 0}; \ -+ hcint_clear.b._intr_ = 1; \ -+ DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \ -+} while (0) -+ -+/* -+ * Macro used to disable one channel interrupt. Channel interrupts are -+ * disabled when the channel is halted or released by the interrupt handler. -+ * There is no need to handle further interrupts of that type until the -+ * channel is re-assigned. In fact, subsequent handling may cause crashes -+ * because the channel structures are cleaned up when the channel is released. -+ */ -+#define disable_hc_int(_hc_regs_, _intr_) \ -+do { \ -+ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ -+ hcintmsk.b._intr_ = 1; \ -+ DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ -+} while (0) -+ -+/** -+ * This function Reads HPRT0 in preparation to modify. It keeps the -+ * WC bits 0 so that if they are read as 1, they won't clear when you -+ * write it back -+ */ -+static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if) -+{ -+ hprt0_data_t hprt0; -+ hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0); -+ hprt0.b.prtena = 0; -+ hprt0.b.prtconndet = 0; -+ hprt0.b.prtenchng = 0; -+ hprt0.b.prtovrcurrchng = 0; -+ return hprt0.d32; -+} -+ -+/**@}*/ -+ -+/** @name Common CIL Functions -+ * The following functions support managing the DWC_otg controller in either -+ * device or host mode. -+ */ -+/**@{*/ -+ -+extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if, -+ uint8_t * dest, uint16_t bytes); -+ -+extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num); -+extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if); -+ -+/** -+ * This function returns the Core Interrupt register. -+ */ -+static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if) -+{ -+ return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) & -+ DWC_READ_REG32(&core_if->core_global_regs->gintmsk)); -+} -+ -+/** -+ * This function returns the OTG Interrupt register. -+ */ -+static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if) -+{ -+ return (DWC_READ_REG32(&core_if->core_global_regs->gotgint)); -+} -+ -+/** -+ * This function reads the Device All Endpoints Interrupt register and -+ * returns the IN endpoint interrupt bits. -+ */ -+static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t * -+ core_if) -+{ -+ -+ uint32_t v; -+ -+ if (core_if->multiproc_int_enable) { -+ v = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->deachint) & -+ DWC_READ_REG32(&core_if-> -+ dev_if->dev_global_regs->deachintmsk); -+ } else { -+ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); -+ } -+ return (v & 0xffff); -+} -+ -+/** -+ * This function reads the Device All Endpoints Interrupt register and -+ * returns the OUT endpoint interrupt bits. -+ */ -+static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t * -+ core_if) -+{ -+ uint32_t v; -+ -+ if (core_if->multiproc_int_enable) { -+ v = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->deachint) & -+ DWC_READ_REG32(&core_if-> -+ dev_if->dev_global_regs->deachintmsk); -+ } else { -+ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) & -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk); -+ } -+ -+ return ((v & 0xffff0000) >> 16); -+} -+ -+/** -+ * This function returns the Device IN EP Interrupt register -+ */ -+static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ uint32_t v, msk, emp; -+ -+ if (core_if->multiproc_int_enable) { -+ msk = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->diepeachintmsk[ep->num]); -+ emp = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->dtknqr4_fifoemptymsk); -+ msk |= ((emp >> ep->num) & 0x1) << 7; -+ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; -+ } else { -+ msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk); -+ emp = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->dtknqr4_fifoemptymsk); -+ msk |= ((emp >> ep->num) & 0x1) << 7; -+ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; -+ } -+ -+ return v; -+} -+ -+/** -+ * This function returns the Device OUT EP Interrupt register -+ */ -+static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t * -+ _core_if, dwc_ep_t * _ep) -+{ -+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; -+ uint32_t v; -+ doepmsk_data_t msk = {.d32 = 0 }; -+ -+ if (_core_if->multiproc_int_enable) { -+ msk.d32 = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->doepeachintmsk[_ep->num]); -+ if (_core_if->pti_enh_enable) { -+ msk.b.pktdrpsts = 1; -+ } -+ v = DWC_READ_REG32(&dev_if-> -+ out_ep_regs[_ep->num]->doepint) & msk.d32; -+ } else { -+ msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk); -+ if (_core_if->pti_enh_enable) { -+ msk.b.pktdrpsts = 1; -+ } -+ v = DWC_READ_REG32(&dev_if-> -+ out_ep_regs[_ep->num]->doepint) & msk.d32; -+ } -+ return v; -+} -+ -+/** -+ * This function returns the Host All Channel Interrupt register -+ */ -+static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t * -+ _core_if) -+{ -+ return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint)); -+} -+ -+static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t * -+ _core_if, dwc_hc_t * _hc) -+{ -+ return (DWC_READ_REG32 -+ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); -+} -+ -+/** -+ * This function returns the mode of the operation, host or device. -+ * -+ * @return 0 - Device Mode, 1 - Host Mode -+ */ -+static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if) -+{ -+ return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1); -+} -+ -+/**@}*/ -+ -+/** -+ * DWC_otg CIL callback structure. This structure allows the HCD and -+ * PCD to register functions used for starting and stopping the PCD -+ * and HCD for role change on for a DRD. -+ */ -+typedef struct dwc_otg_cil_callbacks { -+ /** Start function for role change */ -+ int (*start) (void *_p); -+ /** Stop Function for role change */ -+ int (*stop) (void *_p); -+ /** Disconnect Function for role change */ -+ int (*disconnect) (void *_p); -+ /** Resume/Remote wakeup Function */ -+ int (*resume_wakeup) (void *_p); -+ /** Suspend function */ -+ int (*suspend) (void *_p); -+ /** Session Start (SRP) */ -+ int (*session_start) (void *_p); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ /** Sleep (switch to L0 state) */ -+ int (*sleep) (void *_p); -+#endif -+ /** Pointer passed to start() and stop() */ -+ void *p; -+} dwc_otg_cil_callbacks_t; -+ -+extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if, -+ dwc_otg_cil_callbacks_t * _cb, -+ void *_p); -+extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if, -+ dwc_otg_cil_callbacks_t * _cb, -+ void *_p); -+ -+void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if); -+ -+////////////////////////////////////////////////////////////////////// -+/** Start the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_start(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->start) { -+ core_if->hcd_cb->start(core_if->hcd_cb->p); -+ } -+} -+ -+/** Stop the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->stop) { -+ core_if->hcd_cb->stop(core_if->hcd_cb->p); -+ } -+} -+ -+/** Disconnect the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { -+ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); -+ } -+} -+ -+/** Inform the HCD the a New Session has begun. Helper function for -+ * using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { -+ core_if->hcd_cb->session_start(core_if->hcd_cb->p); -+ } -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * Inform the HCD about LPM sleep. -+ * Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->sleep) { -+ core_if->hcd_cb->sleep(core_if->hcd_cb->p); -+ } -+} -+#endif -+ -+/** Resume the HCD. Helper function for using the HCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) { -+ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p); -+ } -+} -+ -+/** Start the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_start(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->start) { -+ core_if->pcd_cb->start(core_if->pcd_cb->p); -+ } -+} -+ -+/** Stop the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->stop) { -+ core_if->pcd_cb->stop(core_if->pcd_cb->p); -+ } -+} -+ -+/** Suspend the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { -+ core_if->pcd_cb->suspend(core_if->pcd_cb->p); -+ } -+} -+ -+/** Resume the PCD. Helper function for using the PCD callbacks. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if) -+{ -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+} -+ -+////////////////////////////////////////////////////////////////////// -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c -@@ -0,0 +1,1594 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ -+ * $Revision: #32 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * -+ * The Core Interface Layer provides basic services for accessing and -+ * managing the DWC_otg hardware. These services are used by both the -+ * Host Controller Driver and the Peripheral Controller Driver. -+ * -+ * This file contains the Common Interrupt handlers. -+ */ -+#include "dwc_os.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_pcd.h" -+#include "dwc_otg_hcd.h" -+ -+#ifdef DEBUG -+inline const char *op_state_str(dwc_otg_core_if_t * core_if) -+{ -+ return (core_if->op_state == A_HOST ? "a_host" : -+ (core_if->op_state == A_SUSPEND ? "a_suspend" : -+ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" : -+ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" : -+ (core_if->op_state == B_HOST ? "b_host" : "unknown"))))); -+} -+#endif -+ -+/** This function will log a debug message -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", -+ dwc_otg_mode(core_if) ? "Host" : "Device"); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.modemismatch = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This function handles the OTG Interrupts. It reads the OTG -+ * Interrupt Register (GOTGINT) to determine what interrupt has -+ * occurred. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gotgint_data_t gotgint; -+ gotgctl_data_t gotgctl; -+ gintmsk_data_t gintmsk; -+ gpwrdn_data_t gpwrdn; -+ -+ gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint); -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32, -+ op_state_str(core_if)); -+ -+ if (gotgint.b.sesenddet) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "Session End Detected++ (%s)\n", -+ op_state_str(core_if)); -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ -+ if (core_if->op_state == B_HOST) { -+ cil_pcd_start(core_if); -+ core_if->op_state = B_PERIPHERAL; -+ } else { -+ /* If not B_HOST and Device HNP still set. HNP -+ * Did not succeed!*/ -+ if (gotgctl.b.devhnpen) { -+ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); -+ __DWC_ERROR("Device Not Connected/Responding!\n"); -+ } -+ -+ /* If Session End Detected the B-Cable has -+ * been disconnected. */ -+ /* Reset PCD and Gadget driver to a -+ * clean state. */ -+ core_if->lx_state = DWC_OTG_L0; -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ -+ if (core_if->adp_enable) { -+ if (core_if->power_down == 2) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, gpwrdn.d32, 0); -+ } -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ dwc_otg_adp_sense_start(core_if); -+ } -+ } -+ -+ gotgctl.d32 = 0; -+ gotgctl.b.devhnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ } -+ if (gotgint.b.sesreqsucstschng) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "Session Reqeust Success Status Change++\n"); -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ if (gotgctl.b.sesreqscs) { -+ -+ if ((core_if->core_params->phy_type == -+ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) { -+ core_if->srp_success = 1; -+ } else { -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_resume(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ /* Clear Session Request */ -+ gotgctl.d32 = 0; -+ gotgctl.b.sesreq = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, -+ gotgctl.d32, 0); -+ } -+ } -+ } -+ if (gotgint.b.hstnegsucstschng) { -+ /* Print statements during the HNP interrupt handling -+ * can cause it to fail.*/ -+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl); -+ /* WA for 3.00a- HW is not setting cur_mode, even sometimes -+ * this does not help*/ -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) -+ dwc_udelay(100); -+ if (gotgctl.b.hstnegscs) { -+ if (dwc_otg_is_host_mode(core_if)) { -+ core_if->op_state = B_HOST; -+ /* -+ * Need to disable SOF interrupt immediately. -+ * When switching from device to host, the PCD -+ * interrupt handler won't handle the -+ * interrupt if host mode is already set. The -+ * HCD interrupt handler won't get called if -+ * the HCD state is HALT. This means that the -+ * interrupt does not get handled and Linux -+ * complains loudly. -+ */ -+ gintmsk.d32 = 0; -+ gintmsk.b.sofintr = 1; -+ DWC_MODIFY_REG32(&global_regs->gintmsk, -+ gintmsk.d32, 0); -+ /* Call callback function with spin lock released */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ /* -+ * Initialize the Core for Host mode. -+ */ -+ cil_hcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = B_HOST; -+ } -+ } else { -+ gotgctl.d32 = 0; -+ gotgctl.b.hnpreq = 1; -+ gotgctl.b.devhnpen = 1; -+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0); -+ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); -+ __DWC_ERROR("Device Not Connected/Responding\n"); -+ } -+ } -+ if (gotgint.b.hstnegdet) { -+ /* The disconnect interrupt is set at the same time as -+ * Host Negotiation Detected. During the mode -+ * switch all interrupts are cleared so the disconnect -+ * interrupt handler will not get executed. -+ */ -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "Host Negotiation Detected++ (%s)\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : -+ "Device")); -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", -+ core_if->op_state); -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_disconnect(core_if); -+ cil_pcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = A_PERIPHERAL; -+ } else { -+ /* -+ * Need to disable SOF interrupt immediately. When -+ * switching from device to host, the PCD interrupt -+ * handler won't handle the interrupt if host mode is -+ * already set. The HCD interrupt handler won't get -+ * called if the HCD state is HALT. This means that -+ * the interrupt does not get handled and Linux -+ * complains loudly. -+ */ -+ gintmsk.d32 = 0; -+ gintmsk.b.sofintr = 1; -+ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0); -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ cil_hcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = A_HOST; -+ } -+ } -+ if (gotgint.b.adevtoutchng) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " -+ "A-Device Timeout Change++\n"); -+ } -+ if (gotgint.b.debdone) { -+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n"); -+ } -+ -+ /* Clear GOTGINT */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32); -+ -+ return 1; -+} -+ -+void w_conn_id_status_change(void *p) -+{ -+ dwc_otg_core_if_t *core_if = p; -+ uint32_t count = 0; -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ -+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); -+ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); -+ -+ /* B-Device connector (Device Mode) */ -+ if (gotgctl.b.conidsts) { -+ /* Wait for switch to device mode. */ -+ while (!dwc_otg_is_device_mode(core_if)) { -+ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : -+ "Peripheral")); -+ dwc_mdelay(100); -+ if (++count > 10000) -+ break; -+ } -+ DWC_ASSERT(++count < 10000, -+ "Connection id status change timed out"); -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } else { -+ /* A-Device connector (Host Mode) */ -+ while (!dwc_otg_is_host_mode(core_if)) { -+ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : -+ "Peripheral")); -+ dwc_mdelay(100); -+ if (++count > 10000) -+ break; -+ } -+ DWC_ASSERT(++count < 10000, -+ "Connection id status change timed out"); -+ core_if->op_state = A_HOST; -+ /* -+ * Initialize the Core for Host mode. -+ */ -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+} -+ -+/** -+ * This function handles the Connector ID Status Change Interrupt. It -+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this -+ * is a Device to Host Mode transition or a Host Mode to Device -+ * Transition. -+ * -+ * This only occurs when the cable is connected/removed from the PHY -+ * connector. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if) -+{ -+ -+ /* -+ * Need to disable SOF interrupt immediately. If switching from device -+ * to host, the PCD interrupt handler won't handle the interrupt if -+ * host mode is already set. The HCD interrupt handler won't get -+ * called if the HCD state is HALT. This means that the interrupt does -+ * not get handled and Linux complains loudly. -+ */ -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ gintsts_data_t gintsts = {.d32 = 0 }; -+ -+ gintmsk.b.sofintr = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ -+ DWC_DEBUGPL(DBG_CIL, -+ " ++Connector ID Status Change Interrupt++ (%s)\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device")); -+ -+ DWC_SPINUNLOCK(core_if->lock); -+ -+ /* -+ * Need to schedule a work, as there are possible DELAY function calls -+ * Release lock before scheduling workq as it holds spinlock during scheduling -+ */ -+ -+ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change, -+ core_if, "connection id status change"); -+ DWC_SPINLOCK(core_if->lock); -+ -+ /* Set flag and clear interrupt */ -+ gintsts.b.conidstschng = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that a device is initiating the Session -+ * Request Protocol to request the host to turn on bus power so a new -+ * session can begin. The handler responds by turning on bus power. If -+ * the DWC_otg controller is in low power mode, the handler brings the -+ * controller out of low power mode before turning on bus power. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ -+#ifndef DWC_HOST_ONLY -+ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_PRINTF("SRP: Device mode\n"); -+ } else { -+ hprt0_data_t hprt0; -+ DWC_PRINTF("SRP: Host mode\n"); -+ -+ /* Turn on the port power bit. */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Start the Connection timer. So a message can be displayed -+ * if connect does not occur within 10 seconds. */ -+ cil_hcd_session_start(core_if); -+ } -+#endif -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.sessreqintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+void w_wakeup_detected(void *p) -+{ -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p; -+ /* -+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms -+ * so that OPT tests pass with all PHYs). -+ */ -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+#if 0 -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ /* Restart the Phy Clock */ -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ dwc_udelay(10); -+#endif //0 -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32); -+// dwc_mdelay(70); -+ hprt0.b.prtres = 0; /* Resume */ -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n", -+ DWC_READ_REG32(core_if->host_if->hprt0)); -+ -+ cil_hcd_resume(core_if); -+ -+ /** Change to L0 state*/ -+ core_if->lx_state = DWC_OTG_L0; -+} -+ -+/** -+ * This interrupt indicates that the DWC_otg controller has detected a -+ * resume or remote wakeup sequence. If the DWC_otg controller is in -+ * low power mode, the handler must brings the controller out of low -+ * power mode. The controller automatically begins resume -+ * signaling. The handler schedules a time to stop resume signaling. -+ */ -+int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "++Resume and Remote Wakeup Detected Interrupt++\n"); -+ -+ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state); -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs-> -+ dsts)); -+ if (core_if->lx_state == DWC_OTG_L2) { -+#ifdef PARTIAL_POWER_DOWN -+ if (core_if->hwcfg4.b.power_optimiz) { -+ pcgcctl_data_t power = {.d32 = 0 }; -+ -+ power.d32 = DWC_READ_REG32(core_if->pcgcctl); -+ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", -+ power.d32); -+ -+ power.b.stoppclk = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ -+ power.b.pwrclmp = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ -+ power.b.rstpdwnmodule = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ } -+#endif -+ /* Clear the Remote Wakeup Signaling */ -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, dctl.d32, 0); -+ -+ DWC_SPINUNLOCK(core_if->lock); -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+ DWC_SPINLOCK(core_if->lock); -+ } else { -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ } -+ /** Change to L0 state*/ -+ core_if->lx_state = DWC_OTG_L0; -+ } else { -+ if (core_if->lx_state != DWC_OTG_L1) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ -+ /* Restart the Phy Clock */ -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71); -+ } else { -+ /** Change to L0 state*/ -+ core_if->lx_state = DWC_OTG_L0; -+ } -+ } -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.wkupintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * Device disconnect. -+ */ -+static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if) -+{ -+ gpwrdn_data_t gpwrdn = { .d32 = 0 }; -+ gpwrdn_data_t gpwrdn_temp = { .d32 = 0 }; -+ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps*/ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ if (gpwrdn_temp.b.idsts) { -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } else { -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * remote wakeup sequence. -+ */ -+static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_ANY, -+ "++Powerdown Remote Wakeup Detected Interrupt++\n"); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (gpwrdn.b.idsts) { // Device Mode -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ dwc_otg_device_hibernation_restore(core_if, 0, 0); -+ } -+ } else { -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ dwc_otg_host_hibernation_restore(core_if, 1, 0); -+ } -+ } -+ return 1; -+} -+ -+static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ -+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); -+ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (core_if->power_down == 2) { -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n"); -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /*Indicates that we are exiting from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ gpwrdn.d32 = core_if->gr_backup->gpwrdn_local; -+ if (gpwrdn.b.dis_vbus == 1) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ } -+ -+ if (gpwrdn_temp.b.idsts) { -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } else { -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ } -+ } -+ -+ if (core_if->adp_enable) { -+ uint8_t is_host = 0; -+ DWC_SPINUNLOCK(core_if->lock); -+ /* Change the core_if's lock to hcd/pcd lock depend on mode? */ -+#ifndef DWC_HOST_ONLY -+ if (gpwrdn_temp.b.idsts) -+ core_if->lock = otg_dev->pcd->lock; -+#endif -+#ifndef DWC_DEVICE_ONLY -+ if (!gpwrdn_temp.b.idsts) { -+ core_if->lock = otg_dev->hcd->lock; -+ is_host = 1; -+ } -+#endif -+ DWC_PRINTF("RESTART ADP\n"); -+ if (core_if->adp.probe_enabled) -+ dwc_otg_adp_probe_stop(core_if); -+ if (core_if->adp.sense_enabled) -+ dwc_otg_adp_sense_stop(core_if); -+ if (core_if->adp.sense_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.sense_timer); -+ if (core_if->adp.vbuson_timer_started) -+ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer); -+ core_if->adp.probe_timer_values[0] = -1; -+ core_if->adp.probe_timer_values[1] = -1; -+ core_if->adp.sense_timer_started = 0; -+ core_if->adp.vbuson_timer_started = 0; -+ core_if->adp.probe_counter = 0; -+ core_if->adp.gpwrdn = 0; -+ -+ /* Disable PMU and restart ADP */ -+ gpwrdn_temp.d32 = 0; -+ gpwrdn_temp.b.pmuactv = 1; -+ gpwrdn_temp.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ DWC_PRINTF("Check point 1\n"); -+ dwc_mdelay(110); -+ dwc_otg_adp_start(core_if, is_host); -+ DWC_SPINLOCK(core_if->lock); -+ } -+ -+ -+ return 1; -+} -+ -+static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ int32_t otg_cap_param = core_if->core_params->otg_cap; -+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (core_if->power_down == 2) { -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+ -+ if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || -+ otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) && -+ gpwrdn.b.bsessvld == 0) { -+ /* Save gpwrdn register for further usage if stschng interrupt */ -+ core_if->gr_backup->gpwrdn_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ /*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */ -+ return 1; -+ } -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /*Indicates that we are exiting from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE || -+ otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) { -+ /* -+ * Initiate SRP after initial ADP probe. -+ */ -+ dwc_otg_initiate_srp(core_if); -+ } -+ } -+ -+ return 1; -+} -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * status change either on IDDIG or BSessVld. -+ */ -+static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev) -+{ -+ int retval; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (core_if->power_down == 2) { -+ if (core_if->hibernation_suspend <= 0) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } else -+ gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local; -+ -+ } else { -+ gpwrdn_temp.d32 = core_if->adp.gpwrdn; -+ } -+ -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) { -+ retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev); -+ } else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) { -+ retval = dwc_otg_handle_pwrdn_session_change(core_if); -+ } -+ -+ return retval; -+} -+ -+/** -+ * This interrupt indicates that the Wakeup Logic has detected a -+ * SRP. -+ */ -+static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return 1; -+ } -+#ifdef DWC_DEV_SRPCAP -+ if (core_if->pwron_timer_started) { -+ core_if->pwron_timer_started = 0; -+ DWC_TIMER_CANCEL(core_if->pwron_timer); -+ } -+#endif -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Indicates that we are exiting from hibernation */ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Programm Disable VBUS to 0 */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /*Initialize the core as Host */ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+ -+ return 1; -+} -+ -+/** This interrupt indicates that restore command after Hibernation -+ * was completed by the core. */ -+int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if) -+{ -+ pcgcctl_data_t pcgcctl; -+ DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n"); -+ -+ //TODO De-assert restore signal. 8.a -+ pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl); -+ if (pcgcctl.b.restoremode == 1) { -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ /* -+ * If restore mode is Remote Wakeup, -+ * unmask Remote Wakeup interrupt. -+ */ -+ gintmsk.b.wkupintr = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ 0, gintmsk.d32); -+ } -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that a device has been disconnected from -+ * the root port. -+ */ -+int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if) -+{ -+ gintsts_data_t gintsts; -+ -+ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", -+ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"), -+ op_state_str(core_if)); -+ -+/** @todo Consolidate this if statement. */ -+#ifndef DWC_HOST_ONLY -+ if (core_if->op_state == B_HOST) { -+ /* If in device mode Disconnect and stop the HCD, then -+ * start the PCD. */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_disconnect(core_if); -+ cil_pcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = B_PERIPHERAL; -+ } else if (dwc_otg_is_device_mode(core_if)) { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gotgctl.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gotgctl); -+ if (gotgctl.b.hstsethnpen == 1) { -+ /* Do nothing, if HNP in process the OTG -+ * interrupt "Host Negotiation Detected" -+ * interrupt will do the mode switch. -+ */ -+ } else if (gotgctl.b.devhnpen == 0) { -+ /* If in device mode Disconnect and stop the HCD, then -+ * start the PCD. */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_hcd_disconnect(core_if); -+ cil_pcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = B_PERIPHERAL; -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n"); -+ } -+ } else { -+ if (core_if->op_state == A_HOST) { -+ /* A-Cable still connected but device disconnected. */ -+ cil_hcd_disconnect(core_if); -+ if (core_if->adp_enable) { -+ gpwrdn_data_t gpwrdn = { .d32 = 0 }; -+ cil_hcd_stop(core_if); -+ /* Enable Power Down Logic */ -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_otg_adp_probe_start(core_if); -+ -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32 -+ (&core_if->core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ } -+ } -+ } -+ } -+#endif -+ /* Change to L3(OFF) state */ -+ core_if->lx_state = DWC_OTG_L3; -+ -+ gintsts.d32 = 0; -+ gintsts.b.disconnect = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that SUSPEND state has been detected on -+ * the USB. -+ * -+ * For HNP the USB Suspend interrupt signals the change from -+ * "a_peripheral" to "a_host". -+ * -+ * When power management is enabled the core will be put in low power -+ * mode. -+ */ -+int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ gintsts_data_t gintsts; -+ dcfg_data_t dcfg; -+ -+ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n"); -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ /* Check the Device status register to determine if the Suspend -+ * state is active. */ -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); -+ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " -+ "HWCFG4.power Optimize=%d\n", -+ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); -+ -+#ifdef PARTIAL_POWER_DOWN -+/** @todo Add a module parameter for power management. */ -+ -+ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { -+ pcgcctl_data_t power = {.d32 = 0 }; -+ DWC_DEBUGPL(DBG_CIL, "suspend\n"); -+ -+ power.b.pwrclmp = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32); -+ -+ power.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); -+ -+ power.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32); -+ -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "disconnect?\n"); -+ } -+#endif -+ /* PCD callback for suspend. Release the lock inside of callback function */ -+ cil_pcd_suspend(core_if); -+ if (core_if->power_down == 2) -+ { -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state); -+ DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr); -+ -+ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+ -+ /* Change to L2(suspend) state */ -+ core_if->lx_state = DWC_OTG_L2; -+ -+ /* Clear interrupt in gintsts */ -+ gintsts.d32 = 0; -+ gintsts.b.usbsuspend = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, gintsts.d32); -+ DWC_PRINTF("Start of hibernation completed\n"); -+ dwc_otg_save_global_regs(core_if); -+ dwc_otg_save_dev_regs(core_if); -+ -+ gusbcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs-> -+ gusbcfg); -+ if (gusbcfg.b.ulpi_utmi_sel == 1) { -+ /* ULPI interface */ -+ /* Suspend the Phy Clock */ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } else { -+ /* UTMI+ Interface */ -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ } -+ -+ /* Set flag to indicate that we are in hibernation */ -+ core_if->hibernation_suspend = 1; -+ /* Enable interrupts from wake up logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Unmask device mode interrupts in GPWRDN */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.rst_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ gpwrdn.b.sts_chngint_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Enable Power Down Clamp */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Switch off VDD */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ /* Save gpwrdn register for further usage if stschng interrupt */ -+ core_if->gr_backup->gpwrdn_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ DWC_PRINTF("Hibernation completed\n"); -+ -+ return 1; -+ } -+ } else if (core_if->power_down == 3) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); -+ DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state); -+ DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr); -+ -+ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) { -+ DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n"); -+ core_if->xhib = 1; -+ -+ /* Clear interrupt in gintsts */ -+ gintsts.d32 = 0; -+ gintsts.b.usbsuspend = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, gintsts.d32); -+ -+ dwc_otg_save_global_regs(core_if); -+ dwc_otg_save_dev_regs(core_if); -+ -+ /* Wait for 10 PHY clocks */ -+ dwc_udelay(10); -+ -+ /* Program GPIO register while entering to xHib */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1); -+ -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.extnd_hiber_pwrclmp = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.extnd_hiber_switch = 1; -+ core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n"); -+ -+ return 1; -+ } -+ } -+ } else { -+ if (core_if->op_state == A_PERIPHERAL) { -+ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n"); -+ /* Clear the a_peripheral flag, back to a_host. */ -+ DWC_SPINUNLOCK(core_if->lock); -+ cil_pcd_stop(core_if); -+ cil_hcd_start(core_if); -+ DWC_SPINLOCK(core_if->lock); -+ core_if->op_state = A_HOST; -+ } -+ } -+ -+ /* Change to L2(suspend) state */ -+ core_if->lx_state = DWC_OTG_L2; -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.usbsuspend = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gahbcfg_data_t gahbcfg = {.d32 = 0 }; -+ -+ dwc_udelay(10); -+ -+ /* Program GPIO register while entering to xHib */ -+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0); -+ -+ pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl; -+ pcgcctl.b.extnd_hiber_pwrclmp = 0; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn; -+ gpwrdn.b.restore = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ restore_lpm_i2c_regs(core_if); -+ -+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); -+ pcgcctl.b.max_xcvrselect = 1; -+ pcgcctl.b.ess_reg_restored = 0; -+ pcgcctl.b.extnd_hiber_switch = 0; -+ pcgcctl.b.extnd_hiber_pwrclmp = 0; -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ -+ gahbcfg.d32 = core_if->gr_backup->gahbcfg_local; -+ gahbcfg.b.glblintrmsk = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32); -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF); -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16); -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, -+ core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, -+ core_if->dr_backup->dcfg); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); -+ pcgcctl.b.max_xcvrselect = 1; -+ pcgcctl.d32 |= 0x608; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ dwc_udelay(10); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14); -+ pcgcctl.b.max_xcvrselect = 1; -+ pcgcctl.b.ess_reg_restored = 1; -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ pcgcctl.b.rstpdwnmodule = 1; -+ pcgcctl.b.restoremode = 1; -+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32); -+ -+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__); -+ -+ return 1; -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * This function hadles LPM transaction received interrupt. -+ */ -+static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if) -+{ -+ glpmcfg_data_t lpmcfg; -+ gintsts_data_t gintsts; -+ -+ if (!core_if->core_params->lpm_enable) { -+ DWC_PRINTF("Unexpected LPM interrupt\n"); -+ } -+ -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32); -+ -+ if (dwc_otg_is_host_mode(core_if)) { -+ cil_hcd_sleep(core_if); -+ } else { -+ lpmcfg.b.hird_thres |= (1 << 4); -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ } -+ -+ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */ -+ dwc_udelay(10); -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.prt_sleep_sts) { -+ /* Save the current state */ -+ core_if->lx_state = DWC_OTG_L1; -+ } -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.lpmtranrcvd = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ return 1; -+} -+#endif /* CONFIG_USB_DWC_OTG_LPM */ -+ -+/** -+ * This function returns the Core Interrupt register. -+ */ -+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk, dwc_otg_hcd_t *hcd) -+{ -+ gahbcfg_data_t gahbcfg = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk; -+ gintmsk_data_t gintmsk_common = {.d32 = 0 }; -+ gintmsk_common.b.wkupintr = 1; -+ gintmsk_common.b.sessreqintr = 1; -+ gintmsk_common.b.conidstschng = 1; -+ gintmsk_common.b.otgintr = 1; -+ gintmsk_common.b.modemismatch = 1; -+ gintmsk_common.b.disconnect = 1; -+ gintmsk_common.b.usbsuspend = 1; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ gintmsk_common.b.lpmtranrcvd = 1; -+#endif -+ gintmsk_common.b.restoredone = 1; -+ if(dwc_otg_is_device_mode(core_if)) -+ { -+ /** @todo: The port interrupt occurs while in device -+ * mode. Added code to CIL to clear the interrupt for now! -+ */ -+ gintmsk_common.b.portintr = 1; -+ } -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ if(fiq_enable) { -+ local_fiq_disable(); -+ /* Pull in the interrupts that the FIQ has masked */ -+ gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32); -+ gintmsk.d32 |= gintmsk_common.d32; -+ /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */ -+ reenable_gintmsk->d32 = gintmsk.d32; -+ local_fiq_enable(); -+ } -+ -+ gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg); -+ -+#ifdef DEBUG -+ /* if any common interrupts set */ -+ if (gintsts.d32 & gintmsk_common.d32) { -+ DWC_DEBUGPL(DBG_ANY, "common_intr: gintsts=%08x gintmsk=%08x\n", -+ gintsts.d32, gintmsk.d32); -+ } -+#endif -+ if (!fiq_enable){ -+ if (gahbcfg.b.glblintrmsk) -+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); -+ else -+ return 0; -+ } else { -+ /* Our IRQ kicker is no longer the USB hardware, it's the MPHI interface. -+ * Can't trust the global interrupt mask bit in this case. -+ */ -+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); -+ } -+ -+} -+ -+/* MACRO for clearing interupt bits in GPWRDN register */ -+#define CLEAR_GPWRDN_INTR(__core_if,__intr) \ -+do { \ -+ gpwrdn_data_t gpwrdn = {.d32=0}; \ -+ gpwrdn.b.__intr = 1; \ -+ DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \ -+ 0, gpwrdn.d32); \ -+} while (0) -+ -+/** -+ * Common interrupt handler. -+ * -+ * The common interrupts are those that occur in both Host and Device mode. -+ * This handler handles the following interrupts: -+ * - Mode Mismatch Interrupt -+ * - Disconnect Interrupt -+ * - OTG Interrupt -+ * - Connector ID Status Change Interrupt -+ * - Session Request Interrupt. -+ * - Resume / Remote Wakeup Detected Interrupt. -+ * - LPM Transaction Received Interrupt -+ * - ADP Transaction Received Interrupt -+ * -+ */ -+int32_t dwc_otg_handle_common_intr(void *dev) -+{ -+ int retval = 0; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk_reenable = { .d32 = 0 }; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ dwc_otg_device_t *otg_dev = dev; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ if (dwc_otg_is_device_mode(core_if)) -+ core_if->frame_num = dwc_otg_get_frame_number(core_if); -+ -+ if (core_if->lock) -+ DWC_SPINLOCK(core_if->lock); -+ -+ if (core_if->power_down == 3 && core_if->xhib == 1) { -+ DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n"); -+ retval |= dwc_otg_handle_xhib_exit_intr(core_if); -+ core_if->xhib = 2; -+ if (core_if->lock) -+ DWC_SPINUNLOCK(core_if->lock); -+ -+ return retval; -+ } -+ -+ if (core_if->hibernation_suspend <= 0) { -+ /* read_common will have to poke the FIQ's saved mask. We must then clear this mask at the end -+ * of this handler - god only knows why it's done like this -+ */ -+ gintsts.d32 = dwc_otg_read_common_intr(core_if, &gintmsk_reenable, otg_dev->hcd); -+ -+ if (gintsts.b.modemismatch) { -+ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); -+ } -+ if (gintsts.b.otgintr) { -+ retval |= dwc_otg_handle_otg_intr(core_if); -+ } -+ if (gintsts.b.conidstschng) { -+ retval |= -+ dwc_otg_handle_conn_id_status_change_intr(core_if); -+ } -+ if (gintsts.b.disconnect) { -+ retval |= dwc_otg_handle_disconnect_intr(core_if); -+ } -+ if (gintsts.b.sessreqintr) { -+ retval |= dwc_otg_handle_session_req_intr(core_if); -+ } -+ if (gintsts.b.wkupintr) { -+ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); -+ } -+ if (gintsts.b.usbsuspend) { -+ retval |= dwc_otg_handle_usb_suspend_intr(core_if); -+ } -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (gintsts.b.lpmtranrcvd) { -+ retval |= dwc_otg_handle_lpm_intr(core_if); -+ } -+#endif -+ if (gintsts.b.restoredone) { -+ gintsts.d32 = 0; -+ if (core_if->power_down == 2) -+ core_if->hibernation_suspend = -1; -+ else if (core_if->power_down == 3 && core_if->xhib == 2) { -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs-> -+ gintsts, 0xFFFFFFFF); -+ -+ DWC_DEBUGPL(DBG_ANY, -+ "RESTORE DONE generated\n"); -+ -+ gpwrdn.b.restore = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ pcgcctl.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ -+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg); -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl); -+ dwc_udelay(50); -+ -+ dctl.b.pwronprgdone = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ dwc_udelay(10); -+ -+ dwc_otg_restore_global_regs(core_if); -+ dwc_otg_restore_dev_regs(core_if, 0); -+ -+ dctl.d32 = 0; -+ dctl.b.pwronprgdone = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); -+ dwc_udelay(10); -+ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.enbl_extnd_hiber = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ -+ /* The core will be in ON STATE */ -+ core_if->lx_state = DWC_OTG_L0; -+ core_if->xhib = 0; -+ -+ DWC_SPINUNLOCK(core_if->lock); -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+ DWC_SPINLOCK(core_if->lock); -+ -+ } -+ -+ gintsts.b.restoredone = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); -+ DWC_PRINTF(" --Restore done interrupt received-- \n"); -+ retval |= 1; -+ } -+ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { -+ /* The port interrupt occurs while in device mode with HPRT0 -+ * Port Enable/Disable. -+ */ -+ gintsts.d32 = 0; -+ gintsts.b.portintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32); -+ retval |= 1; -+ gintmsk_reenable.b.portintr = 1; -+ -+ } -+ /* Did we actually handle anything? if so, unmask the interrupt */ -+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "CILOUT %1d", retval); -+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintsts.d32); -+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintmsk_reenable.d32); -+ if (retval && fiq_enable) { -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_reenable.d32); -+ } -+ -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32); -+ -+ if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) { -+ CLEAR_GPWRDN_INTR(core_if, disconn_det); -+ if (gpwrdn.b.linestate == 0) { -+ dwc_otg_handle_pwrdn_disconnect_intr(core_if); -+ } else { -+ DWC_PRINTF("Disconnect detected while linestate is not 0\n"); -+ } -+ -+ retval |= 1; -+ } -+ if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) { -+ CLEAR_GPWRDN_INTR(core_if, lnstschng); -+ /* remote wakeup from hibernation */ -+ if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) { -+ dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if); -+ } else { -+ DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate); -+ } -+ retval |= 1; -+ } -+ if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) { -+ CLEAR_GPWRDN_INTR(core_if, rst_det); -+ if (gpwrdn.b.linestate == 0) { -+ DWC_PRINTF("Reset detected\n"); -+ retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1); -+ } -+ } -+ if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) { -+ CLEAR_GPWRDN_INTR(core_if, srp_det); -+ dwc_otg_handle_pwrdn_srp_intr(core_if); -+ retval |= 1; -+ } -+ } -+ /* Handle ADP interrupt here */ -+ if (gpwrdn.b.adp_int) { -+ DWC_PRINTF("ADP interrupt\n"); -+ CLEAR_GPWRDN_INTR(core_if, adp_int); -+ dwc_otg_adp_handle_intr(core_if); -+ retval |= 1; -+ } -+ if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) { -+ DWC_PRINTF("STS CHNG interrupt asserted\n"); -+ CLEAR_GPWRDN_INTR(core_if, sts_chngint); -+ dwc_otg_handle_pwrdn_stschng_intr(otg_dev); -+ -+ retval |= 1; -+ } -+ if (core_if->lock) -+ DWC_SPINUNLOCK(core_if->lock); -+ return retval; -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h -@@ -0,0 +1,705 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $ -+ * $Revision: #13 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#if !defined(__DWC_CORE_IF_H__) -+#define __DWC_CORE_IF_H__ -+ -+#include "dwc_os.h" -+ -+/** @file -+ * This file defines DWC_OTG Core API -+ */ -+ -+struct dwc_otg_core_if; -+typedef struct dwc_otg_core_if dwc_otg_core_if_t; -+ -+/** Maximum number of Periodic FIFOs */ -+#define MAX_PERIO_FIFOS 15 -+/** Maximum number of Periodic FIFOs */ -+#define MAX_TX_FIFOS 15 -+ -+/** Maximum number of Endpoints/HostChannels */ -+#define MAX_EPS_CHANNELS 16 -+ -+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr); -+extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if); -+ -+extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if); -+ -+extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if); -+extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if); -+ -+extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if); -+ -+/** This function should be called on every hardware interrupt. */ -+extern int32_t dwc_otg_handle_common_intr(void *otg_dev); -+ -+/** @name OTG Core Parameters */ -+/** @{ */ -+ -+/** -+ * Specifies the OTG capabilities. The driver will automatically -+ * detect the value for this parameter if none is specified. -+ * 0 - HNP and SRP capable (default) -+ * 1 - SRP Only capable -+ * 2 - No HNP/SRP capable -+ */ -+extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if); -+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 -+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 -+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 -+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE -+ -+extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if); -+#define dwc_param_opt_default 1 -+ -+/** -+ * Specifies whether to use slave or DMA mode for accessing the data -+ * FIFOs. The driver will automatically detect the value for this -+ * parameter if none is specified. -+ * 0 - Slave -+ * 1 - DMA (default, if available) -+ */ -+extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_dma_enable_default 1 -+ -+/** -+ * When DMA mode is enabled specifies whether to use -+ * address DMA or DMA Descritor mode for accessing the data -+ * FIFOs in device mode. The driver will automatically detect -+ * the value for this parameter if none is specified. -+ * 0 - address DMA -+ * 1 - DMA Descriptor(default, if available) -+ */ -+extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if); -+//#define dwc_param_dma_desc_enable_default 1 -+#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708 -+ -+/** The DMA Burst size (applicable only for External DMA -+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) -+ */ -+extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if); -+#define dwc_param_dma_burst_size_default 32 -+ -+/** -+ * Specifies the maximum speed of operation in host and device mode. -+ * The actual speed depends on the speed of the attached device and -+ * the value of phy_type. The actual speed depends on the speed of the -+ * attached device. -+ * 0 - High Speed (default) -+ * 1 - Full Speed -+ */ -+extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if); -+#define dwc_param_speed_default 0 -+#define DWC_SPEED_PARAM_HIGH 0 -+#define DWC_SPEED_PARAM_FULL 1 -+ -+/** Specifies whether low power mode is supported when attached -+ * to a Full Speed or Low Speed device in host mode. -+ * 0 - Don't support low power mode (default) -+ * 1 - Support low power mode -+ */ -+extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t -+ * core_if); -+#define dwc_param_host_support_fs_ls_low_power_default 0 -+ -+/** Specifies the PHY clock rate in low power mode when connected to a -+ * Low Speed device in host mode. This parameter is applicable only if -+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS -+ * then defaults to 6 MHZ otherwise 48 MHZ. -+ * -+ * 0 - 48 MHz -+ * 1 - 6 MHz -+ */ -+extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_host_ls_low_power_phy_clk_default 0 -+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 -+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 -+ -+/** -+ * 0 - Use cC FIFO size parameters -+ * 1 - Allow dynamic FIFO sizing (default) -+ */ -+extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_enable_dynamic_fifo_default 1 -+ -+/** Total number of 4-byte words in the data FIFO memory. This -+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic -+ * Tx FIFOs. -+ * 32 to 32768 (default 8192) -+ * Note: The total FIFO memory depth in the FPGA configuration is 8192. -+ */ -+extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if); -+//#define dwc_param_data_fifo_size_default 8192 -+#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708 -+ -+/** Number of 4-byte words in the Rx FIFO in device mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1064) -+ */ -+extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if); -+#define dwc_param_dev_rx_fifo_size_default 1064 -+ -+/** Number of 4-byte words in the non-periodic Tx FIFO in device mode -+ * when dynamic FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_dev_nperio_tx_fifo_size_default 1024 -+ -+/** Number of 4-byte words in each of the periodic Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val, int fifo_num); -+extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int fifo_num); -+#define dwc_param_dev_perio_tx_fifo_size_default 256 -+ -+/** Number of 4-byte words in the Rx FIFO in host mode when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if); -+//#define dwc_param_host_rx_fifo_size_default 1024 -+#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708 -+ -+/** Number of 4-byte words in the non-periodic Tx FIFO in host mode -+ * when Dynamic FIFO sizing is enabled in the core. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if); -+//#define dwc_param_host_nperio_tx_fifo_size_default 1024 -+#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708 -+ -+/** Number of 4-byte words in the host periodic Tx FIFO when dynamic -+ * FIFO sizing is enabled. -+ * 16 to 32768 (default 1024) -+ */ -+extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if, int32_t val); -+extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * -+ core_if); -+//#define dwc_param_host_perio_tx_fifo_size_default 1024 -+#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708 -+ -+/** The maximum transfer size supported in bytes. -+ * 2047 to 65,535 (default 65,535) -+ */ -+extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if); -+#define dwc_param_max_transfer_size_default 65535 -+ -+/** The maximum number of packets in a transfer. -+ * 15 to 511 (default 511) -+ */ -+extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if); -+#define dwc_param_max_packet_count_default 511 -+ -+/** The number of host channel registers to use. -+ * 1 to 16 (default 12) -+ * Note: The FPGA configuration supports a maximum of 12 host channels. -+ */ -+extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if); -+//#define dwc_param_host_channels_default 12 -+#define dwc_param_host_channels_default 8 // Broadcom BCM2708 -+ -+/** The number of endpoints in addition to EP0 available for device -+ * mode operations. -+ * 1 to 15 (default 6 IN and OUT) -+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT -+ * endpoints in addition to EP0. -+ */ -+extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if); -+#define dwc_param_dev_endpoints_default 6 -+ -+/** -+ * Specifies the type of PHY interface to use. By default, the driver -+ * will automatically detect the phy_type. -+ * -+ * 0 - Full Speed PHY -+ * 1 - UTMI+ (default) -+ * 2 - ULPI -+ */ -+extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if); -+#define DWC_PHY_TYPE_PARAM_FS 0 -+#define DWC_PHY_TYPE_PARAM_UTMI 1 -+#define DWC_PHY_TYPE_PARAM_ULPI 2 -+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI -+ -+/** -+ * Specifies the UTMI+ Data Width. This parameter is -+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI -+ * PHY_TYPE, this parameter indicates the data width between -+ * the MAC and the ULPI Wrapper.) Also, this parameter is -+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set -+ * to "8 and 16 bits", meaning that the core has been -+ * configured to work at either data path width. -+ * -+ * 8 or 16 bits (default 16) -+ */ -+extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if); -+//#define dwc_param_phy_utmi_width_default 16 -+#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708 -+ -+/** -+ * Specifies whether the ULPI operates at double or single -+ * data rate. This parameter is only applicable if PHY_TYPE is -+ * ULPI. -+ * -+ * 0 - single data rate ULPI interface with 8 bit wide data -+ * bus (default) -+ * 1 - double data rate ULPI interface with 4 bit wide data -+ * bus -+ */ -+extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if); -+#define dwc_param_phy_ulpi_ddr_default 0 -+ -+/** -+ * Specifies whether to use the internal or external supply to -+ * drive the vbus with a ULPI phy. -+ */ -+extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if); -+#define DWC_PHY_ULPI_INTERNAL_VBUS 0 -+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 -+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS -+ -+/** -+ * Specifies whether to use the I2Cinterface for full speed PHY. This -+ * parameter is only applicable if PHY_TYPE is FS. -+ * 0 - No (default) -+ * 1 - Yes -+ */ -+extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_i2c_enable_default 0 -+ -+extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if); -+#define dwc_param_ulpi_fs_ls_default 0 -+ -+extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if); -+#define dwc_param_ts_dline_default 0 -+ -+/** -+ * Specifies whether dedicated transmit FIFOs are -+ * enabled for non periodic IN endpoints in device mode -+ * 0 - No -+ * 1 - Yes -+ */ -+extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * -+ core_if); -+#define dwc_param_en_multiple_tx_fifo_default 1 -+ -+/** Number of 4-byte words in each of the Tx FIFOs in device -+ * mode when dynamic FIFO sizing is enabled. -+ * 4 to 768 (default 256) -+ */ -+extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num, int32_t val); -+extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, -+ int fifo_num); -+#define dwc_param_dev_tx_fifo_size_default 768 -+ -+/** Thresholding enable flag- -+ * bit 0 - enable non-ISO Tx thresholding -+ * bit 1 - enable ISO Tx thresholding -+ * bit 2 - enable Rx thresholding -+ */ -+extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num); -+#define dwc_param_thr_ctl_default 0 -+ -+/** Thresholding length for Tx -+ * FIFOs in 32 bit DWORDs -+ */ -+extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if); -+#define dwc_param_tx_thr_length_default 64 -+ -+/** Thresholding length for Rx -+ * FIFOs in 32 bit DWORDs -+ */ -+extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if); -+#define dwc_param_rx_thr_length_default 64 -+ -+/** -+ * Specifies whether LPM (Link Power Management) support is enabled -+ */ -+extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_lpm_enable_default 1 -+ -+/** -+ * Specifies whether PTI enhancement is enabled -+ */ -+extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_pti_enable_default 0 -+ -+/** -+ * Specifies whether MPI enhancement is enabled -+ */ -+extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_mpi_enable_default 0 -+ -+/** -+ * Specifies whether ADP capability is enabled -+ */ -+extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if); -+#define dwc_param_adp_enable_default 0 -+ -+/** -+ * Specifies whether IC_USB capability is enabled -+ */ -+ -+extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if); -+#define dwc_param_ic_usb_cap_default 0 -+ -+extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if); -+#define dwc_param_ahb_thr_ratio_default 0 -+ -+extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if); -+#define dwc_param_power_down_default 0 -+ -+extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if); -+#define dwc_param_reload_ctl_default 0 -+ -+extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if); -+#define dwc_param_dev_out_nak_default 0 -+ -+extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if); -+#define dwc_param_cont_on_bna_default 0 -+ -+extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, -+ int32_t val); -+extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if); -+#define dwc_param_ahb_single_default 0 -+ -+extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val); -+extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if); -+#define dwc_param_otg_ver_default 0 -+ -+/** @} */ -+ -+/** @name Access to registers and bit-fields */ -+ -+/** -+ * Dump core registers and SPRAM -+ */ -+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if); -+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if); -+ -+/** -+ * Get host negotiation status. -+ */ -+extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get srp status -+ */ -+extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Set hnpreq bit in the GOTGCTL register. -+ */ -+extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get Content of SNPSID register. -+ */ -+extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get current mode. -+ * Returns 0 if in device mode, and 1 if in host mode. -+ */ -+extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of hnpcapable field in the GUSBCFG register -+ */ -+extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of hnpcapable field in the GUSBCFG register -+ */ -+extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of srpcapable field in the GUSBCFG register -+ */ -+extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of srpcapable field in the GUSBCFG register -+ */ -+extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of devspeed field in the DCFG register -+ */ -+extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of devspeed field in the DCFG register -+ */ -+extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get the value of busconnected field from the HPRT0 register -+ */ -+extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Gets the device enumeration Speed. -+ */ -+extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of prtpwr field from the HPRT0 register -+ */ -+extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of flag indicating core state - hibernated or not -+ */ -+extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Set value of prtpwr field from the HPRT0 register -+ */ -+extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of prtsusp field from the HPRT0 regsiter -+ */ -+extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of prtpwr field from the HPRT0 register -+ */ -+extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of ModeChTimEn field from the HCFG regsiter -+ */ -+extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of ModeChTimEn field from the HCFG regsiter -+ */ -+extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of Fram Interval field from the HFIR regsiter -+ */ -+extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of Frame Interval field from the HFIR regsiter -+ */ -+extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Set value of prtres field from the HPRT0 register -+ *FIXME Remove? -+ */ -+extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of rmtwkupsig bit in DCTL register -+ */ -+extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of prt_sleep_sts field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of rem_wkup_en field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Get value of appl_resp field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of appl_resp field from the GLPMCFG register -+ */ -+extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of hsic_connect field from the GLPMCFG register -+ */ -+extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of hsic_connect field from the GLPMCFG register -+ */ -+extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * Get value of inv_sel_hsic field from the GLPMCFG register. -+ */ -+extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if); -+/** -+ * Set value of inv_sel_hsic field from the GLPMFG register. -+ */ -+extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/* -+ * Some functions for accessing registers -+ */ -+ -+/** -+ * GOTGCTL register -+ */ -+extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GUSBCFG register -+ */ -+extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GRXFSIZ register -+ */ -+extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GNPTXFSIZ register -+ */ -+extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GGPIO register -+ */ -+extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GUID register -+ */ -+extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * HPRT0 register -+ */ -+extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if); -+extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val); -+ -+/** -+ * GHPTXFSIZE -+ */ -+extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if); -+ -+/** @} */ -+ -+#endif /* __DWC_CORE_IF_H__ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h -@@ -0,0 +1,117 @@ -+/* ========================================================================== -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_DBG_H__ -+#define __DWC_OTG_DBG_H__ -+ -+/** @file -+ * This file defines debug levels. -+ * Debugging support vanishes in non-debug builds. -+ */ -+ -+/** -+ * The Debug Level bit-mask variable. -+ */ -+extern uint32_t g_dbg_lvl; -+/** -+ * Set the Debug Level variable. -+ */ -+static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new) -+{ -+ uint32_t old = g_dbg_lvl; -+ g_dbg_lvl = new; -+ return old; -+} -+ -+#define DBG_USER (0x1) -+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ -+#define DBG_CIL (0x2) -+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug -+ * messages */ -+#define DBG_CILV (0x20) -+/** When debug level has the DBG_PCD bit set, display PCD (Device) debug -+ * messages */ -+#define DBG_PCD (0x4) -+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug -+ * messages */ -+#define DBG_PCDV (0x40) -+/** When debug level has the DBG_HCD bit set, display Host debug messages */ -+#define DBG_HCD (0x8) -+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug -+ * messages */ -+#define DBG_HCDV (0x80) -+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host -+ * mode. */ -+#define DBG_HCD_URB (0x800) -+/** When debug level has the DBG_HCDI bit set, display host interrupt -+ * messages. */ -+#define DBG_HCDI (0x1000) -+ -+/** When debug level has any bit set, display debug messages */ -+#define DBG_ANY (0xFF) -+ -+/** All debug messages off */ -+#define DBG_OFF 0 -+ -+/** Prefix string for DWC_DEBUG print macros. */ -+#define USB_DWC "DWC_otg: " -+ -+/** -+ * Print a debug message when the Global debug level variable contains -+ * the bit defined in <code>lvl</code>. -+ * -+ * @param[in] lvl - Debug level, use one of the DBG_ constants above. -+ * @param[in] x - like printf -+ * -+ * Example:<p> -+ * <code> -+ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); -+ * </code> -+ * <br> -+ * results in:<br> -+ * <code> -+ * usb-DWC_otg: dwc_otg_cil_init(ca867000) -+ * </code> -+ */ -+#ifdef DEBUG -+ -+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0) -+# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) -+ -+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) -+ -+#else -+ -+# define DWC_DEBUGPL(lvl, x...) do{}while(0) -+# define DWC_DEBUGP(x...) -+ -+# define CHK_DEBUG_LEVEL(level) (0) -+ -+#endif /*DEBUG*/ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c -@@ -0,0 +1,1757 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $ -+ * $Revision: #92 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+/** @file -+ * The dwc_otg_driver module provides the initialization and cleanup entry -+ * points for the DWC_otg driver. This module will be dynamically installed -+ * after Linux is booted using the insmod command. When the module is -+ * installed, the dwc_otg_driver_init function is called. When the module is -+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. -+ * -+ * This module also defines a data structure for the dwc_otg_driver, which is -+ * used in conjunction with the standard ARM lm_device structure. These -+ * structures allow the OTG driver to comply with the standard Linux driver -+ * model in which devices and drivers are registered with a bus driver. This -+ * has the benefit that Linux can expose attributes of the driver and device -+ * in its special sysfs file system. Users can then read or write files in -+ * this file system to perform diagnostics on the driver components or the -+ * device. -+ */ -+ -+#include "dwc_otg_os_dep.h" -+#include "dwc_os.h" -+#include "dwc_otg_dbg.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_attr.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_hcd_if.h" -+#include "dwc_otg_fiq_fsm.h" -+ -+#define DWC_DRIVER_VERSION "3.00a 10-AUG-2012" -+#define DWC_DRIVER_DESC "HS OTG USB Controller driver" -+ -+bool microframe_schedule=true; -+ -+static const char dwc_driver_name[] = "dwc_otg"; -+ -+ -+extern int pcd_init( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+extern int hcd_init( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *dev -+#endif -+ ); -+ -+extern int pcd_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *_dev -+#endif -+ ); -+ -+extern void hcd_remove( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *_dev -+#endif -+ ); -+ -+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host); -+ -+/*-------------------------------------------------------------------------*/ -+/* Encapsulate the module parameter settings */ -+ -+struct dwc_otg_driver_module_params { -+ int32_t opt; -+ int32_t otg_cap; -+ int32_t dma_enable; -+ int32_t dma_desc_enable; -+ int32_t dma_burst_size; -+ int32_t speed; -+ int32_t host_support_fs_ls_low_power; -+ int32_t host_ls_low_power_phy_clk; -+ int32_t enable_dynamic_fifo; -+ int32_t data_fifo_size; -+ int32_t dev_rx_fifo_size; -+ int32_t dev_nperio_tx_fifo_size; -+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; -+ int32_t host_rx_fifo_size; -+ int32_t host_nperio_tx_fifo_size; -+ int32_t host_perio_tx_fifo_size; -+ int32_t max_transfer_size; -+ int32_t max_packet_count; -+ int32_t host_channels; -+ int32_t dev_endpoints; -+ int32_t phy_type; -+ int32_t phy_utmi_width; -+ int32_t phy_ulpi_ddr; -+ int32_t phy_ulpi_ext_vbus; -+ int32_t i2c_enable; -+ int32_t ulpi_fs_ls; -+ int32_t ts_dline; -+ int32_t en_multiple_tx_fifo; -+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; -+ uint32_t thr_ctl; -+ uint32_t tx_thr_length; -+ uint32_t rx_thr_length; -+ int32_t pti_enable; -+ int32_t mpi_enable; -+ int32_t lpm_enable; -+ int32_t ic_usb_cap; -+ int32_t ahb_thr_ratio; -+ int32_t power_down; -+ int32_t reload_ctl; -+ int32_t dev_out_nak; -+ int32_t cont_on_bna; -+ int32_t ahb_single; -+ int32_t otg_ver; -+ int32_t adp_enable; -+}; -+ -+static struct dwc_otg_driver_module_params dwc_otg_module_params = { -+ .opt = -1, -+ .otg_cap = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .dma_burst_size = -1, -+ .speed = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .enable_dynamic_fifo = -1, -+ .data_fifo_size = -1, -+ .dev_rx_fifo_size = -1, -+ .dev_nperio_tx_fifo_size = -1, -+ .dev_perio_tx_fifo_size = { -+ /* dev_perio_tx_fifo_size_1 */ -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1 -+ /* 15 */ -+ }, -+ .host_rx_fifo_size = -1, -+ .host_nperio_tx_fifo_size = -1, -+ .host_perio_tx_fifo_size = -1, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .dev_endpoints = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .ts_dline = -1, -+ .en_multiple_tx_fifo = -1, -+ .dev_tx_fifo_size = { -+ /* dev_tx_fifo_size */ -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1, -+ -1 -+ /* 15 */ -+ }, -+ .thr_ctl = -1, -+ .tx_thr_length = -1, -+ .rx_thr_length = -1, -+ .pti_enable = -1, -+ .mpi_enable = -1, -+ .lpm_enable = 0, -+ .ic_usb_cap = -1, -+ .ahb_thr_ratio = -1, -+ .power_down = -1, -+ .reload_ctl = -1, -+ .dev_out_nak = -1, -+ .cont_on_bna = -1, -+ .ahb_single = -1, -+ .otg_ver = -1, -+ .adp_enable = -1, -+}; -+ -+//Global variable to switch the fiq fix on or off -+bool fiq_enable = 1; -+// Global variable to enable the split transaction fix -+bool fiq_fsm_enable = true; -+//Bulk split-transaction NAK holdoff in microframes -+uint16_t nak_holdoff = 8; -+ -+unsigned short fiq_fsm_mask = 0x0F; -+ -+/** -+ * This function shows the Driver Version. -+ */ -+static ssize_t version_show(struct device_driver *dev, char *buf) -+{ -+ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n", -+ DWC_DRIVER_VERSION); -+} -+ -+static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); -+ -+/** -+ * Global Debug Level Mask. -+ */ -+uint32_t g_dbg_lvl = 0; /* OFF */ -+ -+/** -+ * This function shows the driver Debug Level. -+ */ -+static ssize_t dbg_level_show(struct device_driver *drv, char *buf) -+{ -+ return sprintf(buf, "0x%0x\n", g_dbg_lvl); -+} -+ -+/** -+ * This function stores the driver Debug Level. -+ */ -+static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, -+ size_t count) -+{ -+ g_dbg_lvl = simple_strtoul(buf, NULL, 16); -+ return count; -+} -+ -+static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show, -+ dbg_level_store); -+ -+/** -+ * This function is called during module intialization -+ * to pass module parameters to the DWC_OTG CORE. -+ */ -+static int set_parameters(dwc_otg_core_if_t * core_if) -+{ -+ int retval = 0; -+ int i; -+ -+ if (dwc_otg_module_params.otg_cap != -1) { -+ retval += -+ dwc_otg_set_param_otg_cap(core_if, -+ dwc_otg_module_params.otg_cap); -+ } -+ if (dwc_otg_module_params.dma_enable != -1) { -+ retval += -+ dwc_otg_set_param_dma_enable(core_if, -+ dwc_otg_module_params. -+ dma_enable); -+ } -+ if (dwc_otg_module_params.dma_desc_enable != -1) { -+ retval += -+ dwc_otg_set_param_dma_desc_enable(core_if, -+ dwc_otg_module_params. -+ dma_desc_enable); -+ } -+ if (dwc_otg_module_params.opt != -1) { -+ retval += -+ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt); -+ } -+ if (dwc_otg_module_params.dma_burst_size != -1) { -+ retval += -+ dwc_otg_set_param_dma_burst_size(core_if, -+ dwc_otg_module_params. -+ dma_burst_size); -+ } -+ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) { -+ retval += -+ dwc_otg_set_param_host_support_fs_ls_low_power(core_if, -+ dwc_otg_module_params. -+ host_support_fs_ls_low_power); -+ } -+ if (dwc_otg_module_params.enable_dynamic_fifo != -1) { -+ retval += -+ dwc_otg_set_param_enable_dynamic_fifo(core_if, -+ dwc_otg_module_params. -+ enable_dynamic_fifo); -+ } -+ if (dwc_otg_module_params.data_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_data_fifo_size(core_if, -+ dwc_otg_module_params. -+ data_fifo_size); -+ } -+ if (dwc_otg_module_params.dev_rx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_dev_rx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_rx_fifo_size); -+ } -+ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_nperio_tx_fifo_size); -+ } -+ if (dwc_otg_module_params.host_rx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_host_rx_fifo_size(core_if, -+ dwc_otg_module_params.host_rx_fifo_size); -+ } -+ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ host_nperio_tx_fifo_size); -+ } -+ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) { -+ retval += -+ dwc_otg_set_param_host_perio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ host_perio_tx_fifo_size); -+ } -+ if (dwc_otg_module_params.max_transfer_size != -1) { -+ retval += -+ dwc_otg_set_param_max_transfer_size(core_if, -+ dwc_otg_module_params. -+ max_transfer_size); -+ } -+ if (dwc_otg_module_params.max_packet_count != -1) { -+ retval += -+ dwc_otg_set_param_max_packet_count(core_if, -+ dwc_otg_module_params. -+ max_packet_count); -+ } -+ if (dwc_otg_module_params.host_channels != -1) { -+ retval += -+ dwc_otg_set_param_host_channels(core_if, -+ dwc_otg_module_params. -+ host_channels); -+ } -+ if (dwc_otg_module_params.dev_endpoints != -1) { -+ retval += -+ dwc_otg_set_param_dev_endpoints(core_if, -+ dwc_otg_module_params. -+ dev_endpoints); -+ } -+ if (dwc_otg_module_params.phy_type != -1) { -+ retval += -+ dwc_otg_set_param_phy_type(core_if, -+ dwc_otg_module_params.phy_type); -+ } -+ if (dwc_otg_module_params.speed != -1) { -+ retval += -+ dwc_otg_set_param_speed(core_if, -+ dwc_otg_module_params.speed); -+ } -+ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) { -+ retval += -+ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if, -+ dwc_otg_module_params. -+ host_ls_low_power_phy_clk); -+ } -+ if (dwc_otg_module_params.phy_ulpi_ddr != -1) { -+ retval += -+ dwc_otg_set_param_phy_ulpi_ddr(core_if, -+ dwc_otg_module_params. -+ phy_ulpi_ddr); -+ } -+ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) { -+ retval += -+ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if, -+ dwc_otg_module_params. -+ phy_ulpi_ext_vbus); -+ } -+ if (dwc_otg_module_params.phy_utmi_width != -1) { -+ retval += -+ dwc_otg_set_param_phy_utmi_width(core_if, -+ dwc_otg_module_params. -+ phy_utmi_width); -+ } -+ if (dwc_otg_module_params.ulpi_fs_ls != -1) { -+ retval += -+ dwc_otg_set_param_ulpi_fs_ls(core_if, -+ dwc_otg_module_params.ulpi_fs_ls); -+ } -+ if (dwc_otg_module_params.ts_dline != -1) { -+ retval += -+ dwc_otg_set_param_ts_dline(core_if, -+ dwc_otg_module_params.ts_dline); -+ } -+ if (dwc_otg_module_params.i2c_enable != -1) { -+ retval += -+ dwc_otg_set_param_i2c_enable(core_if, -+ dwc_otg_module_params. -+ i2c_enable); -+ } -+ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) { -+ retval += -+ dwc_otg_set_param_en_multiple_tx_fifo(core_if, -+ dwc_otg_module_params. -+ en_multiple_tx_fifo); -+ } -+ for (i = 0; i < 15; i++) { -+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { -+ retval += -+ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_perio_tx_fifo_size -+ [i], i); -+ } -+ } -+ -+ for (i = 0; i < 15; i++) { -+ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { -+ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if, -+ dwc_otg_module_params. -+ dev_tx_fifo_size -+ [i], i); -+ } -+ } -+ if (dwc_otg_module_params.thr_ctl != -1) { -+ retval += -+ dwc_otg_set_param_thr_ctl(core_if, -+ dwc_otg_module_params.thr_ctl); -+ } -+ if (dwc_otg_module_params.mpi_enable != -1) { -+ retval += -+ dwc_otg_set_param_mpi_enable(core_if, -+ dwc_otg_module_params. -+ mpi_enable); -+ } -+ if (dwc_otg_module_params.pti_enable != -1) { -+ retval += -+ dwc_otg_set_param_pti_enable(core_if, -+ dwc_otg_module_params. -+ pti_enable); -+ } -+ if (dwc_otg_module_params.lpm_enable != -1) { -+ retval += -+ dwc_otg_set_param_lpm_enable(core_if, -+ dwc_otg_module_params. -+ lpm_enable); -+ } -+ if (dwc_otg_module_params.ic_usb_cap != -1) { -+ retval += -+ dwc_otg_set_param_ic_usb_cap(core_if, -+ dwc_otg_module_params. -+ ic_usb_cap); -+ } -+ if (dwc_otg_module_params.tx_thr_length != -1) { -+ retval += -+ dwc_otg_set_param_tx_thr_length(core_if, -+ dwc_otg_module_params.tx_thr_length); -+ } -+ if (dwc_otg_module_params.rx_thr_length != -1) { -+ retval += -+ dwc_otg_set_param_rx_thr_length(core_if, -+ dwc_otg_module_params. -+ rx_thr_length); -+ } -+ if (dwc_otg_module_params.ahb_thr_ratio != -1) { -+ retval += -+ dwc_otg_set_param_ahb_thr_ratio(core_if, -+ dwc_otg_module_params.ahb_thr_ratio); -+ } -+ if (dwc_otg_module_params.power_down != -1) { -+ retval += -+ dwc_otg_set_param_power_down(core_if, -+ dwc_otg_module_params.power_down); -+ } -+ if (dwc_otg_module_params.reload_ctl != -1) { -+ retval += -+ dwc_otg_set_param_reload_ctl(core_if, -+ dwc_otg_module_params.reload_ctl); -+ } -+ -+ if (dwc_otg_module_params.dev_out_nak != -1) { -+ retval += -+ dwc_otg_set_param_dev_out_nak(core_if, -+ dwc_otg_module_params.dev_out_nak); -+ } -+ -+ if (dwc_otg_module_params.cont_on_bna != -1) { -+ retval += -+ dwc_otg_set_param_cont_on_bna(core_if, -+ dwc_otg_module_params.cont_on_bna); -+ } -+ -+ if (dwc_otg_module_params.ahb_single != -1) { -+ retval += -+ dwc_otg_set_param_ahb_single(core_if, -+ dwc_otg_module_params.ahb_single); -+ } -+ -+ if (dwc_otg_module_params.otg_ver != -1) { -+ retval += -+ dwc_otg_set_param_otg_ver(core_if, -+ dwc_otg_module_params.otg_ver); -+ } -+ if (dwc_otg_module_params.adp_enable != -1) { -+ retval += -+ dwc_otg_set_param_adp_enable(core_if, -+ dwc_otg_module_params. -+ adp_enable); -+ } -+ return retval; -+} -+ -+/** -+ * This function is the top level interrupt handler for the Common -+ * (Device and host modes) interrupts. -+ */ -+static irqreturn_t dwc_otg_common_irq(int irq, void *dev) -+{ -+ int32_t retval = IRQ_NONE; -+ -+ retval = dwc_otg_handle_common_intr(dev); -+ if (retval != 0) { -+ S3C2410X_CLEAR_EINTPEND(); -+ } -+ return IRQ_RETVAL(retval); -+} -+ -+/** -+ * This function is called when a lm_device is unregistered with the -+ * dwc_otg_driver. This happens, for example, when the rmmod command is -+ * executed. The device may or may not be electrically present. If it is -+ * present, the driver stops device processing. Any resources used on behalf -+ * of this device are freed. -+ * -+ * @param _dev -+ */ -+#ifdef LM_INTERFACE -+#define REM_RETVAL(n) -+static void dwc_otg_driver_remove( struct lm_device *_dev ) -+{ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev); -+#elif defined(PCI_INTERFACE) -+#define REM_RETVAL(n) -+static void dwc_otg_driver_remove( struct pci_dev *_dev ) -+{ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev); -+#elif defined(PLATFORM_INTERFACE) -+#define REM_RETVAL(n) n -+static int dwc_otg_driver_remove( struct platform_device *_dev ) -+{ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev); -+#endif -+ -+ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); -+ -+ if (!otg_dev) { -+ /* Memory allocation for the dwc_otg_device failed. */ -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); -+ return REM_RETVAL(-ENOMEM); -+ } -+#ifndef DWC_DEVICE_ONLY -+ if (otg_dev->hcd) { -+ hcd_remove(_dev); -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); -+ return REM_RETVAL(-EINVAL); -+ } -+#endif -+ -+#ifndef DWC_HOST_ONLY -+ if (otg_dev->pcd) { -+ pcd_remove(_dev); -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__); -+ return REM_RETVAL(-EINVAL); -+ } -+#endif -+ /* -+ * Free the IRQ -+ */ -+ if (otg_dev->common_irq_installed) { -+#ifdef PLATFORM_INTERFACE -+ free_irq(platform_get_irq(_dev, 0), otg_dev); -+#else -+ free_irq(_dev->irq, otg_dev); -+#endif -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__); -+ return REM_RETVAL(-ENXIO); -+ } -+ -+ if (otg_dev->core_if) { -+ dwc_otg_cil_remove(otg_dev->core_if); -+ } else { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__); -+ return REM_RETVAL(-ENXIO); -+ } -+ -+ /* -+ * Remove the device attributes -+ */ -+ dwc_otg_attr_remove(_dev); -+ -+ /* -+ * Return the memory. -+ */ -+ if (otg_dev->os_dep.base) { -+ iounmap(otg_dev->os_dep.base); -+ } -+ DWC_FREE(otg_dev); -+ -+ /* -+ * Clear the drvdata pointer. -+ */ -+#ifdef LM_INTERFACE -+ lm_set_drvdata(_dev, 0); -+#elif defined(PCI_INTERFACE) -+ release_mem_region(otg_dev->os_dep.rsrc_start, -+ otg_dev->os_dep.rsrc_len); -+ pci_set_drvdata(_dev, 0); -+#elif defined(PLATFORM_INTERFACE) -+ platform_set_drvdata(_dev, 0); -+#endif -+ return REM_RETVAL(0); -+} -+ -+/** -+ * This function is called when an lm_device is bound to a -+ * dwc_otg_driver. It creates the driver components required to -+ * control the device (CIL, HCD, and PCD) and it initializes the -+ * device. The driver components are stored in a dwc_otg_device -+ * structure. A reference to the dwc_otg_device is saved in the -+ * lm_device. This allows the driver to access the dwc_otg_device -+ * structure on subsequent calls to driver methods for this device. -+ * -+ * @param _dev Bus device -+ */ -+static int dwc_otg_driver_probe( -+#ifdef LM_INTERFACE -+ struct lm_device *_dev -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *_dev, -+ const struct pci_device_id *id -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *_dev -+#endif -+ ) -+{ -+ int retval = 0; -+ dwc_otg_device_t *dwc_otg_device; -+ int devirq; -+ -+ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev); -+#ifdef LM_INTERFACE -+ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start); -+#elif defined(PCI_INTERFACE) -+ if (!id) { -+ DWC_ERROR("Invalid pci_device_id %p", id); -+ return -EINVAL; -+ } -+ -+ if (!_dev || (pci_enable_device(_dev) < 0)) { -+ DWC_ERROR("Invalid pci_device %p", _dev); -+ return -ENODEV; -+ } -+ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0)); -+ /* other stuff needed as well? */ -+ -+#elif defined(PLATFORM_INTERFACE) -+ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n", -+ (unsigned)_dev->resource->start, -+ (unsigned)(_dev->resource->end - _dev->resource->start)); -+#endif -+ -+ dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t)); -+ -+ if (!dwc_otg_device) { -+ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n"); -+ return -ENOMEM; -+ } -+ -+ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device)); -+ dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF; -+ dwc_otg_device->os_dep.platformdev = _dev; -+ -+ /* -+ * Map the DWC_otg Core memory into virtual address space. -+ */ -+#ifdef LM_INTERFACE -+ dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K); -+ -+ if (!dwc_otg_device->os_dep.base) { -+ dev_err(&_dev->dev, "ioremap() failed\n"); -+ DWC_FREE(dwc_otg_device); -+ return -ENOMEM; -+ } -+ dev_dbg(&_dev->dev, "base=0x%08x\n", -+ (unsigned)dwc_otg_device->os_dep.base); -+#elif defined(PCI_INTERFACE) -+ _dev->current_state = PCI_D0; -+ _dev->dev.power.power_state = PMSG_ON; -+ -+ if (!_dev->irq) { -+ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!", -+ pci_name(_dev)); -+ iounmap(dwc_otg_device->os_dep.base); -+ DWC_FREE(dwc_otg_device); -+ return -ENODEV; -+ } -+ -+ dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0); -+ dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0); -+ DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n", -+ (unsigned)dwc_otg_device->os_dep.rsrc_start, -+ (unsigned)dwc_otg_device->os_dep.rsrc_len); -+ if (!request_mem_region -+ (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len, -+ "dwc_otg")) { -+ dev_dbg(&_dev->dev, "error requesting memory\n"); -+ iounmap(dwc_otg_device->os_dep.base); -+ DWC_FREE(dwc_otg_device); -+ return -EFAULT; -+ } -+ -+ dwc_otg_device->os_dep.base = -+ ioremap_nocache(dwc_otg_device->os_dep.rsrc_start, -+ dwc_otg_device->os_dep.rsrc_len); -+ if (dwc_otg_device->os_dep.base == NULL) { -+ dev_dbg(&_dev->dev, "error mapping memory\n"); -+ release_mem_region(dwc_otg_device->os_dep.rsrc_start, -+ dwc_otg_device->os_dep.rsrc_len); -+ iounmap(dwc_otg_device->os_dep.base); -+ DWC_FREE(dwc_otg_device); -+ return -EFAULT; -+ } -+ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n", -+ dwc_otg_device->os_dep.base); -+ dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base; -+ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n", -+ dwc_otg_device->os_dep.base); -+ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__, -+ (unsigned)dwc_otg_device->os_dep.rsrc_start, -+ dwc_otg_device->os_dep.base); -+ -+ pci_set_master(_dev); -+ pci_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PLATFORM_INTERFACE) -+ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n", -+ _dev->resource->start, -+ _dev->resource->end - _dev->resource->start + 1); -+#if 1 -+ if (!request_mem_region(_dev->resource[0].start, -+ _dev->resource[0].end - _dev->resource[0].start + 1, -+ "dwc_otg")) { -+ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); -+ retval = -EFAULT; -+ goto fail; -+ } -+ -+ dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start, -+ _dev->resource[0].end - -+ _dev->resource[0].start+1); -+ if (fiq_enable) -+ { -+ if (!request_mem_region(_dev->resource[1].start, -+ _dev->resource[1].end - _dev->resource[1].start + 1, -+ "dwc_otg")) { -+ dev_dbg(&_dev->dev, "error reserving mapped memory\n"); -+ retval = -EFAULT; -+ goto fail; -+ } -+ -+ dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start, -+ _dev->resource[1].end - -+ _dev->resource[1].start + 1); -+ } -+ -+#else -+ { -+ struct map_desc desc = { -+ .virtual = IO_ADDRESS((unsigned)_dev->resource->start), -+ .pfn = __phys_to_pfn((unsigned)_dev->resource->start), -+ .length = SZ_128K, -+ .type = MT_DEVICE -+ }; -+ iotable_init(&desc, 1); -+ dwc_otg_device->os_dep.base = (void *)desc.virtual; -+ } -+#endif -+ if (!dwc_otg_device->os_dep.base) { -+ dev_err(&_dev->dev, "ioremap() failed\n"); -+ retval = -ENOMEM; -+ goto fail; -+ } -+ dev_dbg(&_dev->dev, "base=0x%08x\n", -+ (unsigned)dwc_otg_device->os_dep.base); -+#endif -+ -+ /* -+ * Initialize driver data to point to the global DWC_otg -+ * Device structure. -+ */ -+#ifdef LM_INTERFACE -+ lm_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PLATFORM_INTERFACE) -+ platform_set_drvdata(_dev, dwc_otg_device); -+#endif -+ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device); -+ -+ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base); -+ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n", -+ dwc_otg_device, dwc_otg_device->core_if);//GRAYG -+ -+ if (!dwc_otg_device->core_if) { -+ dev_err(&_dev->dev, "CIL initialization failed!\n"); -+ retval = -ENOMEM; -+ goto fail; -+ } -+ -+ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n"); -+ /* -+ * Attempt to ensure this device is really a DWC_otg Controller. -+ * Read and verify the SNPSID register contents. The value should be -+ * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3", -+ * as in "OTG version 2.XX" or "OTG version 3.XX". -+ */ -+ -+ if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F542000) && -+ ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) { -+ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n", -+ dwc_otg_get_gsnpsid(dwc_otg_device->core_if)); -+ retval = -EINVAL; -+ goto fail; -+ } -+ -+ /* -+ * Validate parameter values. -+ */ -+ dev_dbg(&_dev->dev, "Calling set_parameters\n"); -+ if (set_parameters(dwc_otg_device->core_if)) { -+ retval = -EINVAL; -+ goto fail; -+ } -+ -+ /* -+ * Create Device Attributes in sysfs -+ */ -+ dev_dbg(&_dev->dev, "Calling attr_create\n"); -+ dwc_otg_attr_create(_dev); -+ -+ /* -+ * Disable the global interrupt until all the interrupt -+ * handlers are installed. -+ */ -+ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n"); -+ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if); -+ -+ /* -+ * Install the interrupt handler for the common interrupts before -+ * enabling common interrupts in core_init below. -+ */ -+ -+#if defined(PLATFORM_INTERFACE) -+ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1); -+#else -+ devirq = _dev->irq; -+#endif -+ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", -+ devirq); -+ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq); -+ retval = request_irq(devirq, dwc_otg_common_irq, -+ IRQF_SHARED, -+ "dwc_otg", dwc_otg_device); -+ if (retval) { -+ DWC_ERROR("request of irq%d failed\n", devirq); -+ retval = -EBUSY; -+ goto fail; -+ } else { -+ dwc_otg_device->common_irq_installed = 1; -+ } -+ -+#ifndef IRQF_TRIGGER_LOW -+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) -+ dev_dbg(&_dev->dev, "Calling set_irq_type\n"); -+ set_irq_type(devirq, -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) -+ IRQT_LOW -+#else -+ IRQ_TYPE_LEVEL_LOW -+#endif -+ ); -+#endif -+#endif /*IRQF_TRIGGER_LOW*/ -+ -+ /* -+ * Initialize the DWC_otg core. -+ */ -+ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n"); -+ dwc_otg_core_init(dwc_otg_device->core_if); -+ -+#ifndef DWC_HOST_ONLY -+ /* -+ * Initialize the PCD -+ */ -+ dev_dbg(&_dev->dev, "Calling pcd_init\n"); -+ retval = pcd_init(_dev); -+ if (retval != 0) { -+ DWC_ERROR("pcd_init failed\n"); -+ dwc_otg_device->pcd = NULL; -+ goto fail; -+ } -+#endif -+#ifndef DWC_DEVICE_ONLY -+ /* -+ * Initialize the HCD -+ */ -+ dev_dbg(&_dev->dev, "Calling hcd_init\n"); -+ retval = hcd_init(_dev); -+ if (retval != 0) { -+ DWC_ERROR("hcd_init failed\n"); -+ dwc_otg_device->hcd = NULL; -+ goto fail; -+ } -+#endif -+ /* Recover from drvdata having been overwritten by hcd_init() */ -+#ifdef LM_INTERFACE -+ lm_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PLATFORM_INTERFACE) -+ platform_set_drvdata(_dev, dwc_otg_device); -+#elif defined(PCI_INTERFACE) -+ pci_set_drvdata(_dev, dwc_otg_device); -+ dwc_otg_device->os_dep.pcidev = _dev; -+#endif -+ -+ /* -+ * Enable the global interrupt after all the interrupt -+ * handlers are installed if there is no ADP support else -+ * perform initial actions required for Internal ADP logic. -+ */ -+ if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) { -+ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n"); -+ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if); -+ dev_dbg(&_dev->dev, "Done\n"); -+ } else -+ dwc_otg_adp_start(dwc_otg_device->core_if, -+ dwc_otg_is_host_mode(dwc_otg_device->core_if)); -+ -+ return 0; -+ -+fail: -+ dwc_otg_driver_remove(_dev); -+ return retval; -+} -+ -+/** -+ * This structure defines the methods to be called by a bus driver -+ * during the lifecycle of a device on that bus. Both drivers and -+ * devices are registered with a bus driver. The bus driver matches -+ * devices to drivers based on information in the device and driver -+ * structures. -+ * -+ * The probe function is called when the bus driver matches a device -+ * to this driver. The remove function is called when a device is -+ * unregistered with the bus driver. -+ */ -+#ifdef LM_INTERFACE -+static struct lm_driver dwc_otg_driver = { -+ .drv = {.name = (char *)dwc_driver_name,}, -+ .probe = dwc_otg_driver_probe, -+ .remove = dwc_otg_driver_remove, -+ // 'suspend' and 'resume' absent -+}; -+#elif defined(PCI_INTERFACE) -+static const struct pci_device_id pci_ids[] = { { -+ PCI_DEVICE(0x16c3, 0xabcd), -+ .driver_data = -+ (unsigned long)0xdeadbeef, -+ }, { /* end: all zeroes */ } -+}; -+ -+MODULE_DEVICE_TABLE(pci, pci_ids); -+ -+/* pci driver glue; this is a "new style" PCI driver module */ -+static struct pci_driver dwc_otg_driver = { -+ .name = "dwc_otg", -+ .id_table = pci_ids, -+ -+ .probe = dwc_otg_driver_probe, -+ .remove = dwc_otg_driver_remove, -+ -+ .driver = { -+ .name = (char *)dwc_driver_name, -+ }, -+}; -+#elif defined(PLATFORM_INTERFACE) -+static struct platform_device_id platform_ids[] = { -+ { -+ .name = "bcm2708_usb", -+ .driver_data = (kernel_ulong_t) 0xdeadbeef, -+ }, -+ { /* end: all zeroes */ } -+}; -+MODULE_DEVICE_TABLE(platform, platform_ids); -+ -+static const struct of_device_id dwc_otg_of_match_table[] = { -+ { .compatible = "brcm,bcm2708-usb", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, dwc_otg_of_match_table); -+ -+static struct platform_driver dwc_otg_driver = { -+ .driver = { -+ .name = (char *)dwc_driver_name, -+ .of_match_table = dwc_otg_of_match_table, -+ }, -+ .id_table = platform_ids, -+ -+ .probe = dwc_otg_driver_probe, -+ .remove = dwc_otg_driver_remove, -+ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early' -+}; -+#endif -+ -+/** -+ * This function is called when the dwc_otg_driver is installed with the -+ * insmod command. It registers the dwc_otg_driver structure with the -+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function -+ * to be called. In addition, the bus driver will automatically expose -+ * attributes defined for the device and driver in the special sysfs file -+ * system. -+ * -+ * @return -+ */ -+static int __init dwc_otg_driver_init(void) -+{ -+ int retval = 0; -+ int error; -+ struct device_driver *drv; -+ -+ if(fiq_fsm_enable && !fiq_enable) { -+ printk(KERN_WARNING "dwc_otg: fiq_fsm_enable was set without fiq_enable! Correcting.\n"); -+ fiq_enable = 1; -+ } -+ -+ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name, -+ DWC_DRIVER_VERSION, -+#ifdef LM_INTERFACE -+ "logicmodule"); -+ retval = lm_driver_register(&dwc_otg_driver); -+ drv = &dwc_otg_driver.drv; -+#elif defined(PCI_INTERFACE) -+ "pci"); -+ retval = pci_register_driver(&dwc_otg_driver); -+ drv = &dwc_otg_driver.driver; -+#elif defined(PLATFORM_INTERFACE) -+ "platform"); -+ retval = platform_driver_register(&dwc_otg_driver); -+ drv = &dwc_otg_driver.driver; -+#endif -+ if (retval < 0) { -+ printk(KERN_ERR "%s retval=%d\n", __func__, retval); -+ return retval; -+ } -+ printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_enable ? "enabled":"disabled"); -+ printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff ? "enabled":"disabled"); -+ printk(KERN_DEBUG "dwc_otg: FIQ split-transaction FSM %s\n", fiq_fsm_enable ? "enabled":"disabled"); -+ -+ error = driver_create_file(drv, &driver_attr_version); -+#ifdef DEBUG -+ error = driver_create_file(drv, &driver_attr_debuglevel); -+#endif -+ return retval; -+} -+ -+module_init(dwc_otg_driver_init); -+ -+/** -+ * This function is called when the driver is removed from the kernel -+ * with the rmmod command. The driver unregisters itself with its bus -+ * driver. -+ * -+ */ -+static void __exit dwc_otg_driver_cleanup(void) -+{ -+ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); -+ -+#ifdef LM_INTERFACE -+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel); -+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version); -+ lm_driver_unregister(&dwc_otg_driver); -+#elif defined(PCI_INTERFACE) -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); -+ pci_unregister_driver(&dwc_otg_driver); -+#elif defined(PLATFORM_INTERFACE) -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); -+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); -+ platform_driver_unregister(&dwc_otg_driver); -+#endif -+ -+ printk(KERN_INFO "%s module removed\n", dwc_driver_name); -+} -+ -+module_exit(dwc_otg_driver_cleanup); -+ -+MODULE_DESCRIPTION(DWC_DRIVER_DESC); -+MODULE_AUTHOR("Synopsys Inc."); -+MODULE_LICENSE("GPL"); -+ -+module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); -+MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); -+module_param_named(opt, dwc_otg_module_params.opt, int, 0444); -+MODULE_PARM_DESC(opt, "OPT Mode"); -+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); -+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); -+ -+module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, -+ 0444); -+MODULE_PARM_DESC(dma_desc_enable, -+ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); -+ -+module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, -+ 0444); -+MODULE_PARM_DESC(dma_burst_size, -+ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); -+module_param_named(speed, dwc_otg_module_params.speed, int, 0444); -+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); -+module_param_named(host_support_fs_ls_low_power, -+ dwc_otg_module_params.host_support_fs_ls_low_power, int, -+ 0444); -+MODULE_PARM_DESC(host_support_fs_ls_low_power, -+ "Support Low Power w/FS or LS 0=Support 1=Don't Support"); -+module_param_named(host_ls_low_power_phy_clk, -+ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); -+MODULE_PARM_DESC(host_ls_low_power_phy_clk, -+ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); -+module_param_named(enable_dynamic_fifo, -+ dwc_otg_module_params.enable_dynamic_fifo, int, 0444); -+MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); -+module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, -+ 0444); -+MODULE_PARM_DESC(data_fifo_size, -+ "Total number of words in the data FIFO memory 32-32768"); -+module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, -+ int, 0444); -+MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); -+module_param_named(dev_nperio_tx_fifo_size, -+ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); -+MODULE_PARM_DESC(dev_nperio_tx_fifo_size, -+ "Number of words in the non-periodic Tx FIFO 16-32768"); -+module_param_named(dev_perio_tx_fifo_size_1, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_2, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_3, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_4, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_5, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_6, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_7, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_8, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_9, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_10, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_11, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_12, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_13, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_14, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(dev_perio_tx_fifo_size_15, -+ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); -+MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, -+ "Number of words in the periodic Tx FIFO 4-768"); -+module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, -+ int, 0444); -+MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); -+module_param_named(host_nperio_tx_fifo_size, -+ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); -+MODULE_PARM_DESC(host_nperio_tx_fifo_size, -+ "Number of words in the non-periodic Tx FIFO 16-32768"); -+module_param_named(host_perio_tx_fifo_size, -+ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); -+MODULE_PARM_DESC(host_perio_tx_fifo_size, -+ "Number of words in the host periodic Tx FIFO 16-32768"); -+module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, -+ int, 0444); -+/** @todo Set the max to 512K, modify checks */ -+MODULE_PARM_DESC(max_transfer_size, -+ "The maximum transfer size supported in bytes 2047-65535"); -+module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, -+ int, 0444); -+MODULE_PARM_DESC(max_packet_count, -+ "The maximum number of packets in a transfer 15-511"); -+module_param_named(host_channels, dwc_otg_module_params.host_channels, int, -+ 0444); -+MODULE_PARM_DESC(host_channels, -+ "The number of host channel registers to use 1-16"); -+module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, -+ 0444); -+MODULE_PARM_DESC(dev_endpoints, -+ "The number of endpoints in addition to EP0 available for device mode 1-15"); -+module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); -+MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); -+module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, -+ 0444); -+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); -+module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); -+MODULE_PARM_DESC(phy_ulpi_ddr, -+ "ULPI at double or single data rate 0=Single 1=Double"); -+module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, -+ int, 0444); -+MODULE_PARM_DESC(phy_ulpi_ext_vbus, -+ "ULPI PHY using internal or external vbus 0=Internal"); -+module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); -+MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); -+module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); -+MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); -+module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); -+MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); -+module_param_named(debug, g_dbg_lvl, int, 0444); -+MODULE_PARM_DESC(debug, ""); -+ -+module_param_named(en_multiple_tx_fifo, -+ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); -+MODULE_PARM_DESC(en_multiple_tx_fifo, -+ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); -+module_param_named(dev_tx_fifo_size_1, -+ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_2, -+ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_3, -+ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_4, -+ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_5, -+ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_6, -+ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_7, -+ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_8, -+ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_9, -+ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_10, -+ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_11, -+ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_12, -+ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_13, -+ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_14, -+ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); -+module_param_named(dev_tx_fifo_size_15, -+ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); -+MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); -+ -+module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); -+MODULE_PARM_DESC(thr_ctl, -+ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); -+module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, -+ 0444); -+MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); -+module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, -+ 0444); -+MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); -+ -+module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); -+module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); -+module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444); -+MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled"); -+module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444); -+MODULE_PARM_DESC(ic_usb_cap, -+ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled"); -+module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int, -+ 0444); -+MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio"); -+module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444); -+MODULE_PARM_DESC(power_down, "Power Down Mode"); -+module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444); -+MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control"); -+module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444); -+MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK"); -+module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444); -+MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA"); -+module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444); -+MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support"); -+module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444); -+MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled"); -+module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444); -+MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0"); -+module_param(microframe_schedule, bool, 0444); -+MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler"); -+ -+module_param(fiq_enable, bool, 0444); -+MODULE_PARM_DESC(fiq_enable, "Enable the FIQ"); -+module_param(nak_holdoff, ushort, 0644); -+MODULE_PARM_DESC(nak_holdoff, "Throttle duration for bulk split-transaction endpoints on a NAK. Default 8"); -+module_param(fiq_fsm_enable, bool, 0444); -+MODULE_PARM_DESC(fiq_fsm_enable, "Enable the FIQ to perform split transactions as defined by fiq_fsm_mask"); -+module_param(fiq_fsm_mask, ushort, 0444); -+MODULE_PARM_DESC(fiq_fsm_mask, "Bitmask of transactions to perform in the FIQ.\n" -+ "Bit 0 : Non-periodic split transactions\n" -+ "Bit 1 : Periodic split transactions\n" -+ "Bit 2 : High-speed multi-transfer isochronous\n" -+ "All other bits should be set 0."); -+ -+ -+/** @page "Module Parameters" -+ * -+ * The following parameters may be specified when starting the module. -+ * These parameters define how the DWC_otg controller should be -+ * configured. Parameter values are passed to the CIL initialization -+ * function dwc_otg_cil_init -+ * -+ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code> -+ * -+ -+ <table> -+ <tr><td>Parameter Name</td><td>Meaning</td></tr> -+ -+ <tr> -+ <td>otg_cap</td> -+ <td>Specifies the OTG capabilities. The driver will automatically detect the -+ value for this parameter if none is specified. -+ - 0: HNP and SRP capable (default, if available) -+ - 1: SRP Only capable -+ - 2: No HNP/SRP capable -+ </td></tr> -+ -+ <tr> -+ <td>dma_enable</td> -+ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Slave -+ - 1: DMA (default, if available) -+ </td></tr> -+ -+ <tr> -+ <td>dma_burst_size</td> -+ <td>The DMA Burst size (applicable only for External DMA Mode). -+ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) -+ </td></tr> -+ -+ <tr> -+ <td>speed</td> -+ <td>Specifies the maximum speed of operation in host and device mode. The -+ actual speed depends on the speed of the attached device and the value of -+ phy_type. -+ - 0: High Speed (default) -+ - 1: Full Speed -+ </td></tr> -+ -+ <tr> -+ <td>host_support_fs_ls_low_power</td> -+ <td>Specifies whether low power mode is supported when attached to a Full -+ Speed or Low Speed device in host mode. -+ - 0: Don't support low power mode (default) -+ - 1: Support low power mode -+ </td></tr> -+ -+ <tr> -+ <td>host_ls_low_power_phy_clk</td> -+ <td>Specifies the PHY clock rate in low power mode when connected to a Low -+ Speed device in host mode. This parameter is applicable only if -+ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. -+ - 0: 48 MHz (default) -+ - 1: 6 MHz -+ </td></tr> -+ -+ <tr> -+ <td>enable_dynamic_fifo</td> -+ <td> Specifies whether FIFOs may be resized by the driver software. -+ - 0: Use cC FIFO size parameters -+ - 1: Allow dynamic FIFO sizing (default) -+ </td></tr> -+ -+ <tr> -+ <td>data_fifo_size</td> -+ <td>Total number of 4-byte words in the data FIFO memory. This memory -+ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. -+ - Values: 32 to 32768 (default 8192) -+ -+ Note: The total FIFO memory depth in the FPGA configuration is 8192. -+ </td></tr> -+ -+ <tr> -+ <td>dev_rx_fifo_size</td> -+ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic -+ FIFO sizing is enabled. -+ - Values: 16 to 32768 (default 1064) -+ </td></tr> -+ -+ <tr> -+ <td>dev_nperio_tx_fifo_size</td> -+ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when -+ dynamic FIFO sizing is enabled. -+ - Values: 16 to 32768 (default 1024) -+ </td></tr> -+ -+ <tr> -+ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td> -+ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode -+ when dynamic FIFO sizing is enabled. -+ - Values: 4 to 768 (default 256) -+ </td></tr> -+ -+ <tr> -+ <td>host_rx_fifo_size</td> -+ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO -+ sizing is enabled. -+ - Values: 16 to 32768 (default 1024) -+ </td></tr> -+ -+ <tr> -+ <td>host_nperio_tx_fifo_size</td> -+ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when -+ dynamic FIFO sizing is enabled in the core. -+ - Values: 16 to 32768 (default 1024) -+ </td></tr> -+ -+ <tr> -+ <td>host_perio_tx_fifo_size</td> -+ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO -+ sizing is enabled. -+ - Values: 16 to 32768 (default 1024) -+ </td></tr> -+ -+ <tr> -+ <td>max_transfer_size</td> -+ <td>The maximum transfer size supported in bytes. -+ - Values: 2047 to 65,535 (default 65,535) -+ </td></tr> -+ -+ <tr> -+ <td>max_packet_count</td> -+ <td>The maximum number of packets in a transfer. -+ - Values: 15 to 511 (default 511) -+ </td></tr> -+ -+ <tr> -+ <td>host_channels</td> -+ <td>The number of host channel registers to use. -+ - Values: 1 to 16 (default 12) -+ -+ Note: The FPGA configuration supports a maximum of 12 host channels. -+ </td></tr> -+ -+ <tr> -+ <td>dev_endpoints</td> -+ <td>The number of endpoints in addition to EP0 available for device mode -+ operations. -+ - Values: 1 to 15 (default 6 IN and OUT) -+ -+ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in -+ addition to EP0. -+ </td></tr> -+ -+ <tr> -+ <td>phy_type</td> -+ <td>Specifies the type of PHY interface to use. By default, the driver will -+ automatically detect the phy_type. -+ - 0: Full Speed -+ - 1: UTMI+ (default, if available) -+ - 2: ULPI -+ </td></tr> -+ -+ <tr> -+ <td>phy_utmi_width</td> -+ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a -+ phy_type of UTMI+. Also, this parameter is applicable only if the -+ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the -+ core has been configured to work at either data path width. -+ - Values: 8 or 16 bits (default 16) -+ </td></tr> -+ -+ <tr> -+ <td>phy_ulpi_ddr</td> -+ <td>Specifies whether the ULPI operates at double or single data rate. This -+ parameter is only applicable if phy_type is ULPI. -+ - 0: single data rate ULPI interface with 8 bit wide data bus (default) -+ - 1: double data rate ULPI interface with 4 bit wide data bus -+ </td></tr> -+ -+ <tr> -+ <td>i2c_enable</td> -+ <td>Specifies whether to use the I2C interface for full speed PHY. This -+ parameter is only applicable if PHY_TYPE is FS. -+ - 0: Disabled (default) -+ - 1: Enabled -+ </td></tr> -+ -+ <tr> -+ <td>ulpi_fs_ls</td> -+ <td>Specifies whether to use ULPI FS/LS mode only. -+ - 0: Disabled (default) -+ - 1: Enabled -+ </td></tr> -+ -+ <tr> -+ <td>ts_dline</td> -+ <td>Specifies whether term select D-Line pulsing for all PHYs is enabled. -+ - 0: Disabled (default) -+ - 1: Enabled -+ </td></tr> -+ -+ <tr> -+ <td>en_multiple_tx_fifo</td> -+ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Disabled -+ - 1: Enabled (default, if available) -+ </td></tr> -+ -+ <tr> -+ <td>dev_tx_fifo_size_n (n = 1 to 15)</td> -+ <td>Number of 4-byte words in each of the Tx FIFOs in device mode -+ when dynamic FIFO sizing is enabled. -+ - Values: 4 to 768 (default 256) -+ </td></tr> -+ -+ <tr> -+ <td>tx_thr_length</td> -+ <td>Transmit Threshold length in 32 bit double words -+ - Values: 8 to 128 (default 64) -+ </td></tr> -+ -+ <tr> -+ <td>rx_thr_length</td> -+ <td>Receive Threshold length in 32 bit double words -+ - Values: 8 to 128 (default 64) -+ </td></tr> -+ -+<tr> -+ <td>thr_ctl</td> -+ <td>Specifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of -+ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and -+ Rx transfers accordingly. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - Values: 0 to 7 (default 0) -+ Bit values indicate: -+ - 0: Thresholding disabled -+ - 1: Thresholding enabled -+ </td></tr> -+ -+<tr> -+ <td>dma_desc_enable</td> -+ <td>Specifies whether to enable Descriptor DMA mode. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Descriptor DMA disabled -+ - 1: Descriptor DMA (default, if available) -+ </td></tr> -+ -+<tr> -+ <td>mpi_enable</td> -+ <td>Specifies whether to enable MPI enhancement mode. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: MPI disabled (default) -+ - 1: MPI enable -+ </td></tr> -+ -+<tr> -+ <td>pti_enable</td> -+ <td>Specifies whether to enable PTI enhancement support. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: PTI disabled (default) -+ - 1: PTI enable -+ </td></tr> -+ -+<tr> -+ <td>lpm_enable</td> -+ <td>Specifies whether to enable LPM support. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: LPM disabled -+ - 1: LPM enable (default, if available) -+ </td></tr> -+ -+<tr> -+ <td>ic_usb_cap</td> -+ <td>Specifies whether to enable IC_USB capability. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: IC_USB disabled (default, if available) -+ - 1: IC_USB enable -+ </td></tr> -+ -+<tr> -+ <td>ahb_thr_ratio</td> -+ <td>Specifies AHB Threshold ratio. -+ - Values: 0 to 3 (default 0) -+ </td></tr> -+ -+<tr> -+ <td>power_down</td> -+ <td>Specifies Power Down(Hibernation) Mode. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: Power Down disabled (default) -+ - 2: Power Down enabled -+ </td></tr> -+ -+ <tr> -+ <td>reload_ctl</td> -+ <td>Specifies whether dynamic reloading of the HFIR register is allowed during -+ run time. The driver will automatically detect the value for this parameter if -+ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0 -+ the core might misbehave. -+ - 0: Reload Control disabled (default) -+ - 1: Reload Control enabled -+ </td></tr> -+ -+ <tr> -+ <td>dev_out_nak</td> -+ <td>Specifies whether Device OUT NAK enhancement enabled or no. -+ The driver will automatically detect the value for this parameter if -+ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1. -+ - 0: The core does not set NAK after Bulk OUT transfer complete (default) -+ - 1: The core sets NAK after Bulk OUT transfer complete -+ </td></tr> -+ -+ <tr> -+ <td>cont_on_bna</td> -+ <td>Specifies whether Enable Continue on BNA enabled or no. -+ After receiving BNA interrupt the core disables the endpoint,when the -+ endpoint is re-enabled by the application the -+ - 0: Core starts processing from the DOEPDMA descriptor (default) -+ - 1: Core starts processing from the descriptor which received the BNA. -+ This parameter is valid only when OTG_EN_DESC_DMA == 1b1. -+ </td></tr> -+ -+ <tr> -+ <td>ahb_single</td> -+ <td>This bit when programmed supports SINGLE transfers for remainder data -+ in a transfer for DMA mode of operation. -+ - 0: The remainder data will be sent using INCR burst size (default) -+ - 1: The remainder data will be sent using SINGLE burst size. -+ </td></tr> -+ -+<tr> -+ <td>adp_enable</td> -+ <td>Specifies whether ADP feature is enabled. -+ The driver will automatically detect the value for this parameter if none is -+ specified. -+ - 0: ADP feature disabled (default) -+ - 1: ADP feature enabled -+ </td></tr> -+ -+ <tr> -+ <td>otg_ver</td> -+ <td>Specifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3 -+ USB OTG device. -+ - 0: OTG 2.0 support disabled (default) -+ - 1: OTG 2.0 support enabled -+ </td></tr> -+ -+*/ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h -@@ -0,0 +1,86 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ -+ * $Revision: #19 $ -+ * $Date: 2010/11/15 $ -+ * $Change: 1627671 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_DRIVER_H__ -+#define __DWC_OTG_DRIVER_H__ -+ -+/** @file -+ * This file contains the interface to the Linux driver. -+ */ -+#include "dwc_otg_os_dep.h" -+#include "dwc_otg_core_if.h" -+ -+/* Type declarations */ -+struct dwc_otg_pcd; -+struct dwc_otg_hcd; -+ -+/** -+ * This structure is a wrapper that encapsulates the driver components used to -+ * manage a single DWC_otg controller. -+ */ -+typedef struct dwc_otg_device { -+ /** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE -+ * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD -+ * require this. */ -+ struct os_dependent os_dep; -+ -+ /** Pointer to the core interface structure. */ -+ dwc_otg_core_if_t *core_if; -+ -+ /** Pointer to the PCD structure. */ -+ struct dwc_otg_pcd *pcd; -+ -+ /** Pointer to the HCD structure. */ -+ struct dwc_otg_hcd *hcd; -+ -+ /** Flag to indicate whether the common IRQ handler is installed. */ -+ uint8_t common_irq_installed; -+ -+} dwc_otg_device_t; -+ -+/*We must clear S3C24XX_EINTPEND external interrupt register -+ * because after clearing in this register trigerred IRQ from -+ * H/W core in kernel interrupt can be occured again before OTG -+ * handlers clear all IRQ sources of Core registers because of -+ * timing latencies and Low Level IRQ Type. -+ */ -+#ifdef CONFIG_MACH_IPMATE -+#define S3C2410X_CLEAR_EINTPEND() \ -+do { \ -+ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ -+} while (0) -+#else -+#define S3C2410X_CLEAR_EINTPEND() do { } while (0) -+#endif -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -0,0 +1,1355 @@ -+/* -+ * dwc_otg_fiq_fsm.c - The finite state machine FIQ -+ * -+ * Copyright (c) 2013 Raspberry Pi Foundation -+ * -+ * Author: Jonathan Bell <jonathan@raspberrypi.org> -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Raspberry Pi nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * This FIQ implements functionality that performs split transactions on -+ * the dwc_otg hardware without any outside intervention. A split transaction -+ * is "queued" by nominating a specific host channel to perform the entirety -+ * of a split transaction. This FIQ will then perform the microframe-precise -+ * scheduling required in each phase of the transaction until completion. -+ * -+ * The FIQ functionality is glued into the Synopsys driver via the entry point -+ * in the FSM enqueue function, and at the exit point in handling a HC interrupt -+ * for a FSM-enabled channel. -+ * -+ * NB: Large parts of this implementation have architecture-specific code. -+ * For porting this functionality to other ARM machines, the minimum is required: -+ * - An interrupt controller allowing the top-level dwc USB interrupt to be routed -+ * to the FIQ -+ * - A method of forcing a software generated interrupt from FIQ mode that then -+ * triggers an IRQ entry (with the dwc USB handler called by this IRQ number) -+ * - Guaranteed interrupt routing such that both the FIQ and SGI occur on the same -+ * processor core - there is no locking between the FIQ and IRQ (aside from -+ * local_fiq_disable) -+ * -+ */ -+ -+#include "dwc_otg_fiq_fsm.h" -+ -+ -+char buffer[1000*16]; -+int wptr; -+void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...) -+{ -+ enum fiq_debug_level dbg_lvl_req = FIQDBG_ERR; -+ va_list args; -+ char text[17]; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + 0x408) }; -+ -+ if((dbg_lvl & dbg_lvl_req) || dbg_lvl == FIQDBG_ERR) -+ { -+ snprintf(text, 9, " %4d:%1u ", hfnum.b.frnum/8, hfnum.b.frnum & 7); -+ va_start(args, fmt); -+ vsnprintf(text+8, 9, fmt, args); -+ va_end(args); -+ -+ memcpy(buffer + wptr, text, 16); -+ wptr = (wptr + 16) % sizeof(buffer); -+ } -+} -+ -+/** -+ * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock -+ * Must be called with local interrupts and FIQ disabled. -+ */ -+#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) -+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) -+{ -+ unsigned long tmp; -+ uint32_t newval; -+ fiq_lock_t lockval; -+ smp_mb__before_spinlock(); -+ /* Nested locking, yay. If we are on the same CPU as the fiq, then the disable -+ * will be sufficient. If we are on a different CPU, then the lock protects us. */ -+ prefetchw(&lock->slock); -+ asm volatile ( -+ "1: ldrex %0, [%3]\n" -+ " add %1, %0, %4\n" -+ " strex %2, %1, [%3]\n" -+ " teq %2, #0\n" -+ " bne 1b" -+ : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) -+ : "r" (&lock->slock), "I" (1 << 16) -+ : "cc"); -+ -+ while (lockval.tickets.next != lockval.tickets.owner) { -+ wfe(); -+ lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); -+ } -+ smp_mb(); -+} -+#else -+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) { } -+#endif -+ -+/** -+ * fiq_fsm_spin_unlock() - ARMv6+ bare bones spinunlock -+ */ -+#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP) -+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) -+{ -+ smp_mb(); -+ lock->tickets.owner++; -+ dsb_sev(); -+} -+#else -+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { } -+#endif -+ -+/** -+ * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction -+ * @channel: channel to re-enable -+ */ -+static void fiq_fsm_restart_channel(struct fiq_state *st, int n, int force) -+{ -+ hcchar_data_t hcchar = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR) }; -+ -+ hcchar.b.chen = 0; -+ if (st->channel[n].hcchar_copy.b.eptype & 0x1) { -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; -+ /* Hardware bug workaround: update the ssplit index */ -+ if (st->channel[n].hcsplt_copy.b.spltena) -+ st->channel[n].expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; -+ -+ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; -+ } -+ -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); -+ hcchar.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ hcchar.b.chen = 1; -+ -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32); -+ fiq_print(FIQDBG_INT, st, "HCGO %01d %01d", n, force); -+} -+ -+/** -+ * fiq_fsm_setup_csplit() - Prepare a host channel for a CSplit transaction stage -+ * @st: Pointer to the channel's state -+ * @n : channel number -+ * -+ * Change host channel registers to perform a complete-split transaction. Being mindful of the -+ * endpoint direction, set control regs up correctly. -+ */ -+static void notrace fiq_fsm_setup_csplit(struct fiq_state *st, int n) -+{ -+ hcsplt_data_t hcsplt = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT) }; -+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; -+ -+ hcsplt.b.compsplt = 1; -+ if (st->channel[n].hcchar_copy.b.epdir == 1) { -+ // If IN, the CSPLIT result contains the data or a hub handshake. hctsiz = maxpacket. -+ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; -+ } else { -+ // If OUT, the CSPLIT result contains handshake only. -+ hctsiz.b.xfersize = 0; -+ } -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); -+ mb(); -+} -+ -+static inline int notrace fiq_get_xfer_len(struct fiq_state *st, int n) -+{ -+ /* The xfersize register is a bit wonky. For IN transfers, it decrements by the packet size. */ -+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; -+ -+ if (st->channel[n].hcchar_copy.b.epdir == 0) { -+ return st->channel[n].hctsiz_copy.b.xfersize; -+ } else { -+ return st->channel[n].hctsiz_copy.b.xfersize - hctsiz.b.xfersize; -+ } -+ -+} -+ -+ -+/** -+ * fiq_increment_dma_buf() - update DMA address for bounce buffers after a CSPLIT -+ * -+ * Of use only for IN periodic transfers. -+ */ -+static int notrace fiq_increment_dma_buf(struct fiq_state *st, int num_channels, int n) -+{ -+ hcdma_data_t hcdma; -+ int i = st->channel[n].dma_info.index; -+ int len; -+ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; -+ -+ len = fiq_get_xfer_len(st, n); -+ fiq_print(FIQDBG_INT, st, "LEN: %03d", len); -+ st->channel[n].dma_info.slot_len[i] = len; -+ i++; -+ if (i > 6) -+ BUG(); -+ -+ hcdma.d32 = (dma_addr_t) &blob->channel[n].index[i].buf[0]; -+ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); -+ st->channel[n].dma_info.index = i; -+ return 0; -+} -+ -+/** -+ * fiq_reload_hctsiz() - for IN transactions, reset HCTSIZ -+ */ -+static void notrace fiq_fsm_reload_hctsiz(struct fiq_state *st, int n) -+{ -+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) }; -+ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize; -+ hctsiz.b.pktcnt = 1; -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); -+} -+ -+/** -+ * fiq_iso_out_advance() - update DMA address and split position bits -+ * for isochronous OUT transactions. -+ * -+ * Returns 1 if this is the last packet queued, 0 otherwise. Split-ALL and -+ * Split-BEGIN states are not handled - this is done when the transaction was queued. -+ * -+ * This function must only be called from the FIQ_ISO_OUT_ACTIVE state. -+ */ -+static int notrace fiq_iso_out_advance(struct fiq_state *st, int num_channels, int n) -+{ -+ hcsplt_data_t hcsplt; -+ hctsiz_data_t hctsiz; -+ hcdma_data_t hcdma; -+ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base; -+ int last = 0; -+ int i = st->channel[n].dma_info.index; -+ -+ fiq_print(FIQDBG_INT, st, "ADV %01d %01d ", n, i); -+ i++; -+ if (i == 4) -+ last = 1; -+ if (st->channel[n].dma_info.slot_len[i+1] == 255) -+ last = 1; -+ -+ /* New DMA address - address of bounce buffer referred to in index */ -+ hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0]; -+ //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n)); -+ //hcdma.d32 += st->channel[n].dma_info.slot_len[i]; -+ fiq_print(FIQDBG_INT, st, "LAST: %01d ", last); -+ fiq_print(FIQDBG_INT, st, "LEN: %03d", st->channel[n].dma_info.slot_len[i]); -+ hcsplt.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT); -+ hctsiz.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ); -+ hcsplt.b.xactpos = (last) ? ISOC_XACTPOS_END : ISOC_XACTPOS_MID; -+ /* Set up new packet length */ -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.xfersize = st->channel[n].dma_info.slot_len[i]; -+ fiq_print(FIQDBG_INT, st, "%08x", hctsiz.d32); -+ -+ st->channel[n].dma_info.index++; -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32); -+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32); -+ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); -+ return last; -+} -+ -+/** -+ * fiq_fsm_tt_next_isoc() - queue next pending isochronous out start-split on a TT -+ * -+ * Despite the limitations of the DWC core, we can force a microframe pipeline of -+ * isochronous OUT start-split transactions while waiting for a corresponding other-type -+ * of endpoint to finish its CSPLITs. TTs have big periodic buffers therefore it -+ * is very unlikely that filling the start-split FIFO will cause data loss. -+ * This allows much better interleaving of transactions in an order-independent way- -+ * there is no requirement to prioritise isochronous, just a state-space search has -+ * to be performed on each periodic start-split complete interrupt. -+ */ -+static int notrace fiq_fsm_tt_next_isoc(struct fiq_state *st, int num_channels, int n) -+{ -+ int hub_addr = st->channel[n].hub_addr; -+ int port_addr = st->channel[n].port_addr; -+ int i, poked = 0; -+ for (i = 0; i < num_channels; i++) { -+ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) -+ continue; -+ if (st->channel[i].hub_addr == hub_addr && -+ st->channel[i].port_addr == port_addr) { -+ switch (st->channel[i].fsm) { -+ case FIQ_PER_ISO_OUT_PENDING: -+ if (st->channel[i].nrpackets == 1) { -+ st->channel[i].fsm = FIQ_PER_ISO_OUT_LAST; -+ } else { -+ st->channel[i].fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ } -+ fiq_fsm_restart_channel(st, i, 0); -+ poked = 1; -+ break; -+ -+ default: -+ break; -+ } -+ } -+ if (poked) -+ break; -+ } -+ return poked; -+} -+ -+/** -+ * fiq_fsm_tt_in_use() - search for host channels using this TT -+ * @n: Channel to use as reference -+ * -+ */ -+int notrace noinline fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n) -+{ -+ int hub_addr = st->channel[n].hub_addr; -+ int port_addr = st->channel[n].port_addr; -+ int i, in_use = 0; -+ for (i = 0; i < num_channels; i++) { -+ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH) -+ continue; -+ switch (st->channel[i].fsm) { -+ /* TT is reserved for channels that are in the middle of a periodic -+ * split transaction. -+ */ -+ case FIQ_PER_SSPLIT_STARTED: -+ case FIQ_PER_CSPLIT_WAIT: -+ case FIQ_PER_CSPLIT_NYET1: -+ //case FIQ_PER_CSPLIT_POLL: -+ case FIQ_PER_ISO_OUT_ACTIVE: -+ case FIQ_PER_ISO_OUT_LAST: -+ if (st->channel[i].hub_addr == hub_addr && -+ st->channel[i].port_addr == port_addr) { -+ in_use = 1; -+ } -+ break; -+ default: -+ break; -+ } -+ if (in_use) -+ break; -+ } -+ return in_use; -+} -+ -+/** -+ * fiq_fsm_more_csplits() - determine whether additional CSPLITs need -+ * to be issued for this IN transaction. -+ * -+ * We cannot tell the inbound PID of a data packet due to hardware limitations. -+ * we need to make an educated guess as to whether we need to queue another CSPLIT -+ * or not. A no-brainer is when we have received enough data to fill the endpoint -+ * size, but for endpoints that give variable-length data then we have to resort -+ * to heuristics. -+ * -+ * We also return whether this is the last CSPLIT to be queued, again based on -+ * heuristics. This is to allow a 1-uframe overlap of periodic split transactions. -+ * Note: requires at least 1 CSPLIT to have been performed prior to being called. -+ */ -+ -+/* -+ * We need some way of guaranteeing if a returned periodic packet of size X -+ * has a DATA0 PID. -+ * The heuristic value of 144 bytes assumes that the received data has maximal -+ * bit-stuffing and the clock frequency of the transmitting device is at the lowest -+ * permissible limit. If the transfer length results in a final packet size -+ * 144 < p <= 188, then an erroneous CSPLIT will be issued. -+ * Also used to ensure that an endpoint will nominally only return a single -+ * complete-split worth of data. -+ */ -+#define DATA0_PID_HEURISTIC 144 -+ -+static int notrace noinline fiq_fsm_more_csplits(struct fiq_state *state, int n, int *probably_last) -+{ -+ -+ int i; -+ int total_len = 0; -+ int more_needed = 1; -+ struct fiq_channel_state *st = &state->channel[n]; -+ -+ for (i = 0; i < st->dma_info.index; i++) { -+ total_len += st->dma_info.slot_len[i]; -+ } -+ -+ *probably_last = 0; -+ -+ if (st->hcchar_copy.b.eptype == 0x3) { -+ /* -+ * An interrupt endpoint will take max 2 CSPLITs. if we are receiving data -+ * then this is definitely the last CSPLIT. -+ */ -+ *probably_last = 1; -+ } else { -+ /* Isoc IN. This is a bit risky if we are the first transaction: -+ * we may have been held off slightly. */ -+ if (i > 1 && st->dma_info.slot_len[st->dma_info.index-1] <= DATA0_PID_HEURISTIC) { -+ more_needed = 0; -+ } -+ /* If in the next uframe we will receive enough data to fill the endpoint, -+ * then only issue 1 more csplit. -+ */ -+ if (st->hctsiz_copy.b.xfersize - total_len <= DATA0_PID_HEURISTIC) -+ *probably_last = 1; -+ } -+ -+ if (total_len >= st->hctsiz_copy.b.xfersize || -+ i == 6 || total_len == 0) -+ /* Note: due to bit stuffing it is possible to have > 6 CSPLITs for -+ * a single endpoint. Accepting more would completely break our scheduling mechanism though -+ * - in these extreme cases we will pass through a truncated packet. -+ */ -+ more_needed = 0; -+ -+ return more_needed; -+} -+ -+/** -+ * fiq_fsm_too_late() - Test transaction for lateness -+ * -+ * If a SSPLIT for a large IN transaction is issued too late in a frame, -+ * the hub will disable the port to the device and respond with ERR handshakes. -+ * The hub status endpoint will not reflect this change. -+ * Returns 1 if we will issue a SSPLIT that will result in a device babble. -+ */ -+int notrace fiq_fsm_too_late(struct fiq_state *st, int n) -+{ -+ int uframe; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; -+ uframe = hfnum.b.frnum & 0x7; -+ if ((uframe < 6) && (st->channel[n].nrpackets + 1 + uframe > 7)) { -+ return 1; -+ } else { -+ return 0; -+ } -+} -+ -+ -+/** -+ * fiq_fsm_start_next_periodic() - A half-arsed attempt at a microframe pipeline -+ * -+ * Search pending transactions in the start-split pending state and queue them. -+ * Don't queue packets in uframe .5 (comes out in .6) (USB2.0 11.18.4). -+ * Note: we specifically don't do isochronous OUT transactions first because better -+ * use of the TT's start-split fifo can be achieved by pipelining an IN before an OUT. -+ */ -+static void notrace noinline fiq_fsm_start_next_periodic(struct fiq_state *st, int num_channels) -+{ -+ int n; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) }; -+ if ((hfnum.b.frnum & 0x7) == 5) -+ return; -+ for (n = 0; n < num_channels; n++) { -+ if (st->channel[n].fsm == FIQ_PER_SSPLIT_QUEUED) { -+ /* Check to see if any other transactions are using this TT */ -+ if(!fiq_fsm_tt_in_use(st, num_channels, n)) { -+ if (!fiq_fsm_too_late(st, n)) { -+ st->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; -+ fiq_print(FIQDBG_INT, st, "NEXTPER "); -+ fiq_fsm_restart_channel(st, n, 0); -+ } else { -+ st->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; -+ } -+ break; -+ } -+ } -+ } -+ for (n = 0; n < num_channels; n++) { -+ if (st->channel[n].fsm == FIQ_PER_ISO_OUT_PENDING) { -+ if (!fiq_fsm_tt_in_use(st, num_channels, n)) { -+ fiq_print(FIQDBG_INT, st, "NEXTISO "); -+ st->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ fiq_fsm_restart_channel(st, n, 0); -+ break; -+ } -+ } -+ } -+} -+ -+/** -+ * fiq_fsm_update_hs_isoc() - update isochronous frame and transfer data -+ * @state: Pointer to fiq_state -+ * @n: Channel transaction is active on -+ * @hcint: Copy of host channel interrupt register -+ * -+ * Returns 0 if there are no more transactions for this HC to do, 1 -+ * otherwise. -+ */ -+static int notrace noinline fiq_fsm_update_hs_isoc(struct fiq_state *state, int n, hcint_data_t hcint) -+{ -+ struct fiq_channel_state *st = &state->channel[n]; -+ int xfer_len = 0, nrpackets = 0; -+ hcdma_data_t hcdma; -+ fiq_print(FIQDBG_INT, state, "HSISO %02d", n); -+ -+ xfer_len = fiq_get_xfer_len(state, n); -+ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].actual_length = xfer_len; -+ -+ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].status = hcint.d32; -+ -+ st->hs_isoc_info.index++; -+ if (st->hs_isoc_info.index == st->hs_isoc_info.nrframes) { -+ return 0; -+ } -+ -+ /* grab the next DMA address offset from the array */ -+ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].offset; -+ FIQ_WRITE(state->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32); -+ -+ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as -+ * the core needs to be told to send the correct number. Caution: for IN transfers, -+ * this is always set to the maximum size of the endpoint. */ -+ xfer_len = st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].length; -+ /* Integer divide in a FIQ: fun. FIXME: make this not suck */ -+ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; -+ if (nrpackets == 0) -+ nrpackets = 1; -+ st->hcchar_copy.b.multicnt = nrpackets; -+ st->hctsiz_copy.b.pktcnt = nrpackets; -+ -+ /* Initial PID also needs to be set */ -+ if (st->hcchar_copy.b.epdir == 0) { -+ st->hctsiz_copy.b.xfersize = xfer_len; -+ switch (st->hcchar_copy.b.multicnt) { -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_MDATA; -+ break; -+ } -+ -+ } else { -+ switch (st->hcchar_copy.b.multicnt) { -+ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA1; -+ break; -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA2; -+ break; -+ } -+ } -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, st->hctsiz_copy.d32); -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, st->hcchar_copy.d32); -+ /* Channel is enabled on hcint handler exit */ -+ fiq_print(FIQDBG_INT, state, "HSISOOUT"); -+ return 1; -+} -+ -+ -+/** -+ * fiq_fsm_do_sof() - FSM start-of-frame interrupt handler -+ * @state: Pointer to the state struct passed from banked FIQ mode registers. -+ * @num_channels: set according to the DWC hardware configuration -+ * -+ * The SOF handler in FSM mode has two functions -+ * 1. Hold off SOF from causing schedule advancement in IRQ context if there's -+ * nothing to do -+ * 2. Advance certain FSM states that require either a microframe delay, or a microframe -+ * of holdoff. -+ * -+ * The second part is architecture-specific to mach-bcm2835 - -+ * a sane interrupt controller would have a mask register for ARM interrupt sources -+ * to be promoted to the nFIQ line, but it doesn't. Instead a single interrupt -+ * number (USB) can be enabled. This means that certain parts of the USB specification -+ * that require "wait a little while, then issue another packet" cannot be fulfilled with -+ * the timing granularity required to achieve optimal throughout. The workaround is to use -+ * the SOF "timer" (125uS) to perform this task. -+ */ -+static int notrace noinline fiq_fsm_do_sof(struct fiq_state *state, int num_channels) -+{ -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + HFNUM) }; -+ int n; -+ int kick_irq = 0; -+ -+ if ((hfnum.b.frnum & 0x7) == 1) { -+ /* We cannot issue csplits for transactions in the last frame past (n+1).1 -+ * Check to see if there are any transactions that are stale. -+ * Boot them out. -+ */ -+ for (n = 0; n < num_channels; n++) { -+ switch (state->channel[n].fsm) { -+ case FIQ_PER_CSPLIT_WAIT: -+ case FIQ_PER_CSPLIT_NYET1: -+ case FIQ_PER_CSPLIT_POLL: -+ case FIQ_PER_CSPLIT_LAST: -+ /* Check if we are no longer in the same full-speed frame. */ -+ if (((state->channel[n].expected_uframe & 0x3FFF) & ~0x7) < -+ (hfnum.b.frnum & ~0x7)) -+ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; -+ break; -+ default: -+ break; -+ } -+ } -+ } -+ -+ for (n = 0; n < num_channels; n++) { -+ switch (state->channel[n].fsm) { -+ -+ case FIQ_NP_SSPLIT_RETRY: -+ case FIQ_NP_IN_CSPLIT_RETRY: -+ case FIQ_NP_OUT_CSPLIT_RETRY: -+ fiq_fsm_restart_channel(state, n, 0); -+ break; -+ -+ case FIQ_HS_ISOC_SLEEPING: -+ /* Is it time to wake this channel yet? */ -+ if (--state->channel[n].uframe_sleeps == 0) { -+ state->channel[n].fsm = FIQ_HS_ISOC_TURBO; -+ fiq_fsm_restart_channel(state, n, 0); -+ } -+ break; -+ -+ case FIQ_PER_SSPLIT_QUEUED: -+ if ((hfnum.b.frnum & 0x7) == 5) -+ break; -+ if(!fiq_fsm_tt_in_use(state, num_channels, n)) { -+ if (!fiq_fsm_too_late(state, n)) { -+ fiq_print(FIQDBG_INT, state, "SOF GO %01d", n); -+ fiq_fsm_restart_channel(state, n, 0); -+ state->channel[n].fsm = FIQ_PER_SSPLIT_STARTED; -+ } else { -+ /* Transaction cannot be started without risking a device babble error */ -+ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT; -+ state->haintmsk_saved.b2.chint &= ~(1 << n); -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); -+ kick_irq |= 1; -+ } -+ } -+ break; -+ -+ case FIQ_PER_ISO_OUT_PENDING: -+ /* Ordinarily, this should be poked after the SSPLIT -+ * complete interrupt for a competing transfer on the same -+ * TT. Doesn't happen for aborted transactions though. -+ */ -+ if ((hfnum.b.frnum & 0x7) >= 5) -+ break; -+ if (!fiq_fsm_tt_in_use(state, num_channels, n)) { -+ /* Hardware bug. SOF can sometimes occur after the channel halt interrupt -+ * that caused this. -+ */ -+ fiq_fsm_restart_channel(state, n, 0); -+ fiq_print(FIQDBG_INT, state, "SOF ISOC"); -+ if (state->channel[n].nrpackets == 1) { -+ state->channel[n].fsm = FIQ_PER_ISO_OUT_LAST; -+ } else { -+ state->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ } -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_WAIT: -+ /* we are guaranteed to be in this state if and only if the SSPLIT interrupt -+ * occurred when the bus transaction occurred. The SOF interrupt reversal bug -+ * will utterly bugger this up though. -+ */ -+ if (hfnum.b.frnum != state->channel[n].expected_uframe) { -+ fiq_print(FIQDBG_INT, state, "SOFCS %d ", n); -+ state->channel[n].fsm = FIQ_PER_CSPLIT_POLL; -+ fiq_fsm_restart_channel(state, n, 0); -+ fiq_fsm_start_next_periodic(state, num_channels); -+ -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_TIMEOUT: -+ case FIQ_DEQUEUE_ISSUED: -+ /* Ugly: we have to force a HCD interrupt. -+ * Poke the mask for the channel in question. -+ * We will take a fake SOF because of this, but -+ * that's OK. -+ */ -+ state->haintmsk_saved.b2.chint &= ~(1 << n); -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0); -+ kick_irq |= 1; -+ break; -+ -+ default: -+ break; -+ } -+ } -+ -+ if (state->kick_np_queues || -+ dwc_frame_num_le(state->next_sched_frame, hfnum.b.frnum)) -+ kick_irq |= 1; -+ -+ return !kick_irq; -+} -+ -+ -+/** -+ * fiq_fsm_do_hcintr() - FSM host channel interrupt handler -+ * @state: Pointer to the FIQ state struct -+ * @num_channels: Number of channels as per hardware config -+ * @n: channel for which HAINT(i) was raised -+ * -+ * An important property is that only the CHHLT interrupt is unmasked. Unfortunately, AHBerr is as well. -+ */ -+static int notrace noinline fiq_fsm_do_hcintr(struct fiq_state *state, int num_channels, int n) -+{ -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ hcint_data_t hcint_probe; -+ hcchar_data_t hcchar; -+ int handled = 0; -+ int restart = 0; -+ int last_csplit = 0; -+ int start_next_periodic = 0; -+ struct fiq_channel_state *st = &state->channel[n]; -+ hfnum_data_t hfnum; -+ -+ hcint.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT); -+ hcintmsk.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK); -+ hcint_probe.d32 = hcint.d32 & hcintmsk.d32; -+ -+ if (st->fsm != FIQ_PASSTHROUGH) { -+ fiq_print(FIQDBG_INT, state, "HC%01d ST%02d", n, st->fsm); -+ fiq_print(FIQDBG_INT, state, "%08x", hcint.d32); -+ } -+ -+ switch (st->fsm) { -+ -+ case FIQ_PASSTHROUGH: -+ case FIQ_DEQUEUE_ISSUED: -+ /* doesn't belong to us, kick it upstairs */ -+ break; -+ -+ case FIQ_PASSTHROUGH_ERRORSTATE: -+ /* We are here to emulate the error recovery mechanism of the dwc HCD. -+ * Several interrupts are unmasked if a previous transaction failed - it's -+ * death for the FIQ to attempt to handle them as the channel isn't halted. -+ * Emulate what the HCD does in this situation: mask and continue. -+ * The FSM has no other state setup so this has to be handled out-of-band. -+ */ -+ fiq_print(FIQDBG_ERR, state, "ERRST %02d", n); -+ if (hcint_probe.b.nak || hcint_probe.b.ack || hcint_probe.b.datatglerr) { -+ fiq_print(FIQDBG_ERR, state, "RESET %02d", n); -+ /* In some random cases we can get a NAK interrupt coincident with a Xacterr -+ * interrupt, after the device has disappeared. -+ */ -+ if (!hcint.b.xacterr) -+ st->nr_errors = 0; -+ hcintmsk.b.nak = 0; -+ hcintmsk.b.ack = 0; -+ hcintmsk.b.datatglerr = 0; -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, hcintmsk.d32); -+ return 1; -+ } -+ if (hcint_probe.b.chhltd) { -+ fiq_print(FIQDBG_ERR, state, "CHHLT %02d", n); -+ fiq_print(FIQDBG_ERR, state, "%08x", hcint.d32); -+ return 0; -+ } -+ break; -+ -+ /* Non-periodic state groups */ -+ case FIQ_NP_SSPLIT_STARTED: -+ case FIQ_NP_SSPLIT_RETRY: -+ /* Got a HCINT for a NP SSPLIT. Expected ACK / NAK / fail */ -+ if (hcint.b.ack) { -+ /* SSPLIT complete. For OUT, the data has been sent. For IN, the LS transaction -+ * will start shortly. SOF needs to kick the transaction to prevent a NYET flood. -+ */ -+ if(st->hcchar_copy.b.epdir == 1) -+ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; -+ else -+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; -+ st->nr_errors = 0; -+ handled = 1; -+ fiq_fsm_setup_csplit(state, n); -+ } else if (hcint.b.nak) { -+ // No buffer space in TT. Retry on a uframe boundary. -+ st->fsm = FIQ_NP_SSPLIT_RETRY; -+ handled = 1; -+ } else if (hcint.b.xacterr) { -+ // The only other one we care about is xacterr. This implies HS bus error - retry. -+ st->nr_errors++; -+ st->fsm = FIQ_NP_SSPLIT_RETRY; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ restart = 1; -+ } -+ } else { -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ handled = 0; -+ restart = 0; -+ } -+ break; -+ -+ case FIQ_NP_IN_CSPLIT_RETRY: -+ /* Received a CSPLIT done interrupt. -+ * Expected Data/NAK/STALL/NYET for IN. -+ */ -+ if (hcint.b.xfercomp) { -+ /* For IN, data is present. */ -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nak) { -+ /* no endpoint data. Punt it upstairs */ -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nyet) { -+ /* CSPLIT NYET - retry on a uframe boundary. */ -+ handled = 1; -+ st->nr_errors = 0; -+ } else if (hcint.b.datatglerr) { -+ /* data toggle errors do not set the xfercomp bit. */ -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ } else if (hcint.b.xacterr) { -+ /* HS error. Retry immediate */ -+ st->fsm = FIQ_NP_IN_CSPLIT_RETRY; -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ restart = 1; -+ } -+ } else if (hcint.b.stall || hcint.b.bblerr) { -+ /* A STALL implies either a LS bus error or a genuine STALL. */ -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ } else { -+ /* Hardware bug. It's possible in some cases to -+ * get a channel halt with nothing else set when -+ * the response was a NYET. Treat as local 3-strikes retry. -+ */ -+ hcint_data_t hcint_test = hcint; -+ hcint_test.b.chhltd = 0; -+ if (!hcint_test.d32) { -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ } -+ } else { -+ /* Bail out if something unexpected happened */ -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } -+ } -+ break; -+ -+ case FIQ_NP_OUT_CSPLIT_RETRY: -+ /* Received a CSPLIT done interrupt. -+ * Expected ACK/NAK/STALL/NYET/XFERCOMP for OUT.*/ -+ if (hcint.b.xfercomp) { -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nak) { -+ // The HCD will implement the holdoff on frame boundaries. -+ st->fsm = FIQ_NP_SPLIT_DONE; -+ } else if (hcint.b.nyet) { -+ // Hub still processing. -+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; -+ handled = 1; -+ st->nr_errors = 0; -+ //restart = 1; -+ } else if (hcint.b.xacterr) { -+ /* HS error. retry immediate */ -+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY; -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ restart = 1; -+ } -+ } else if (hcint.b.stall) { -+ /* LS bus error or genuine stall */ -+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED; -+ } else { -+ /* -+ * Hardware bug. It's possible in some cases to get a -+ * channel halt with nothing else set when the response was a NYET. -+ * Treat as local 3-strikes retry. -+ */ -+ hcint_data_t hcint_test = hcint; -+ hcint_test.b.chhltd = 0; -+ if (!hcint_test.d32) { -+ st->nr_errors++; -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } else { -+ handled = 1; -+ } -+ } else { -+ // Something unexpected happened. AHBerror or babble perhaps. Let the IRQ deal with it. -+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED; -+ } -+ } -+ break; -+ -+ /* Periodic split states (except isoc out) */ -+ case FIQ_PER_SSPLIT_STARTED: -+ /* Expect an ACK or failure for SSPLIT */ -+ if (hcint.b.ack) { -+ /* -+ * SSPLIT transfer complete interrupt - the generation of this interrupt is fraught with bugs. -+ * For a packet queued in microframe n-3 to appear in n-2, if the channel is enabled near the EOF1 -+ * point for microframe n-3, the packet will not appear on the bus until microframe n. -+ * Additionally, the generation of the actual interrupt is dodgy. For a packet appearing on the bus -+ * in microframe n, sometimes the interrupt is generated immediately. Sometimes, it appears in n+1 -+ * coincident with SOF for n+1. -+ * SOF is also buggy. It can sometimes be raised AFTER the first bus transaction has taken place. -+ * These appear to be caused by timing/clock crossing bugs within the core itself. -+ * State machine workaround. -+ */ -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ fiq_fsm_setup_csplit(state, n); -+ /* Poke the oddfrm bit. If we are equivalent, we received the interrupt at the correct -+ * time. If not, then we're in the next SOF. -+ */ -+ if ((hfnum.b.frnum & 0x1) == hcchar.b.oddfrm) { -+ fiq_print(FIQDBG_INT, state, "CSWAIT %01d", n); -+ st->expected_uframe = hfnum.b.frnum; -+ st->fsm = FIQ_PER_CSPLIT_WAIT; -+ } else { -+ fiq_print(FIQDBG_INT, state, "CSPOL %01d", n); -+ /* For isochronous IN endpoints, -+ * we need to hold off if we are expecting a lot of data */ -+ if (st->hcchar_copy.b.mps < DATA0_PID_HEURISTIC) { -+ start_next_periodic = 1; -+ } -+ /* Danger will robinson: we are in a broken state. If our first interrupt after -+ * this is a NYET, it will be delayed by 1 uframe and result in an unrecoverable -+ * lag. Unmask the NYET interrupt. -+ */ -+ st->expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF; -+ st->fsm = FIQ_PER_CSPLIT_BROKEN_NYET1; -+ restart = 1; -+ } -+ handled = 1; -+ } else if (hcint.b.xacterr) { -+ /* 3-strikes retry is enabled, we have hit our max nr_errors */ -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ start_next_periodic = 1; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ start_next_periodic = 1; -+ } -+ /* We can now queue the next isochronous OUT transaction, if one is pending. */ -+ if(fiq_fsm_tt_next_isoc(state, num_channels, n)) { -+ fiq_print(FIQDBG_INT, state, "NEXTISO "); -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_NYET1: -+ /* First CSPLIT attempt was a NYET. If we get a subsequent NYET, -+ * we are too late and the TT has dropped its CSPLIT fifo. -+ */ -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ start_next_periodic = 1; -+ if (hcint.b.nak) { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } else if (hcint.b.xfercomp) { -+ fiq_increment_dma_buf(state, num_channels, n); -+ st->fsm = FIQ_PER_CSPLIT_POLL; -+ st->nr_errors = 0; -+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { -+ handled = 1; -+ restart = 1; -+ if (!last_csplit) -+ start_next_periodic = 0; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } else if (hcint.b.nyet) { -+ /* Doh. Data lost. */ -+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; -+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { -+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_BROKEN_NYET1: -+ /* -+ * we got here because our host channel is in the delayed-interrupt -+ * state and we cannot take a NYET interrupt any later than when it -+ * occurred. Disable then re-enable the channel if this happens to force -+ * CSPLITs to occur at the right time. -+ */ -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ fiq_print(FIQDBG_INT, state, "BROK: %01d ", n); -+ if (hcint.b.nak) { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ start_next_periodic = 1; -+ } else if (hcint.b.xfercomp) { -+ fiq_increment_dma_buf(state, num_channels, n); -+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { -+ st->fsm = FIQ_PER_CSPLIT_POLL; -+ handled = 1; -+ restart = 1; -+ start_next_periodic = 1; -+ /* Reload HCTSIZ for the next transfer */ -+ fiq_fsm_reload_hctsiz(state, n); -+ if (!last_csplit) -+ start_next_periodic = 0; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } else if (hcint.b.nyet) { -+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; -+ start_next_periodic = 1; -+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { -+ /* Local 3-strikes retry is handled by the core. This is a ERR response.*/ -+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ } -+ break; -+ -+ case FIQ_PER_CSPLIT_POLL: -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR); -+ start_next_periodic = 1; -+ if (hcint.b.nak) { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } else if (hcint.b.xfercomp) { -+ fiq_increment_dma_buf(state, num_channels, n); -+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) { -+ handled = 1; -+ restart = 1; -+ /* Reload HCTSIZ for the next transfer */ -+ fiq_fsm_reload_hctsiz(state, n); -+ if (!last_csplit) -+ start_next_periodic = 0; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } else if (hcint.b.nyet) { -+ /* Are we a NYET after the first data packet? */ -+ if (st->nrpackets == 0) { -+ st->fsm = FIQ_PER_CSPLIT_NYET1; -+ handled = 1; -+ restart = 1; -+ } else { -+ /* We got a NYET when polling CSPLITs. Can happen -+ * if our heuristic fails, or if someone disables us -+ * for any significant length of time. -+ */ -+ if (st->nr_errors >= 3) { -+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_DONE; -+ } -+ } -+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) { -+ /* For xacterr, Local 3-strikes retry is handled by the core. This is a ERR response.*/ -+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED; -+ } else { -+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED; -+ } -+ break; -+ -+ case FIQ_HS_ISOC_TURBO: -+ if (fiq_fsm_update_hs_isoc(state, n, hcint)) { -+ /* more transactions to come */ -+ handled = 1; -+ fiq_print(FIQDBG_INT, state, "HSISO M "); -+ /* For strided transfers, put ourselves to sleep */ -+ if (st->hs_isoc_info.stride > 1) { -+ st->uframe_sleeps = st->hs_isoc_info.stride - 1; -+ st->fsm = FIQ_HS_ISOC_SLEEPING; -+ } else { -+ restart = 1; -+ } -+ } else { -+ st->fsm = FIQ_HS_ISOC_DONE; -+ fiq_print(FIQDBG_INT, state, "HSISO F "); -+ } -+ break; -+ -+ case FIQ_HS_ISOC_ABORTED: -+ /* This abort is called by the driver rewriting the state mid-transaction -+ * which allows the dequeue mechanism to work more effectively. -+ */ -+ break; -+ -+ case FIQ_PER_ISO_OUT_ACTIVE: -+ if (hcint.b.ack) { -+ if(fiq_iso_out_advance(state, num_channels, n)) { -+ /* last OUT transfer */ -+ st->fsm = FIQ_PER_ISO_OUT_LAST; -+ /* -+ * Assuming the periodic FIFO in the dwc core -+ * actually does its job properly, we can queue -+ * the next ssplit now and in theory, the wire -+ * transactions will be in-order. -+ */ -+ // No it doesn't. It appears to process requests in host channel order. -+ //start_next_periodic = 1; -+ } -+ handled = 1; -+ restart = 1; -+ } else { -+ /* -+ * Isochronous transactions carry on regardless. Log the error -+ * and continue. -+ */ -+ //explode += 1; -+ st->nr_errors++; -+ if(fiq_iso_out_advance(state, num_channels, n)) { -+ st->fsm = FIQ_PER_ISO_OUT_LAST; -+ //start_next_periodic = 1; -+ } -+ handled = 1; -+ restart = 1; -+ } -+ break; -+ -+ case FIQ_PER_ISO_OUT_LAST: -+ if (hcint.b.ack) { -+ /* All done here */ -+ st->fsm = FIQ_PER_ISO_OUT_DONE; -+ } else { -+ st->fsm = FIQ_PER_ISO_OUT_DONE; -+ st->nr_errors++; -+ } -+ start_next_periodic = 1; -+ break; -+ -+ case FIQ_PER_SPLIT_TIMEOUT: -+ /* SOF kicked us because we overran. */ -+ start_next_periodic = 1; -+ break; -+ -+ default: -+ break; -+ } -+ -+ if (handled) { -+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT, hcint.d32); -+ } else { -+ /* Copy the regs into the state so the IRQ knows what to do */ -+ st->hcint_copy.d32 = hcint.d32; -+ } -+ -+ if (restart) { -+ /* Restart always implies handled. */ -+ if (restart == 2) { -+ /* For complete-split INs, the show must go on. -+ * Force a channel restart */ -+ fiq_fsm_restart_channel(state, n, 1); -+ } else { -+ fiq_fsm_restart_channel(state, n, 0); -+ } -+ } -+ if (start_next_periodic) { -+ fiq_fsm_start_next_periodic(state, num_channels); -+ } -+ if (st->fsm != FIQ_PASSTHROUGH) -+ fiq_print(FIQDBG_INT, state, "FSMOUT%02d", st->fsm); -+ -+ return handled; -+} -+ -+ -+/** -+ * dwc_otg_fiq_fsm() - Flying State Machine (monster) FIQ -+ * @state: pointer to state struct passed from the banked FIQ mode registers. -+ * @num_channels: set according to the DWC hardware configuration -+ * @dma: pointer to DMA bounce buffers for split transaction slots -+ * -+ * The FSM FIQ performs the low-level tasks that normally would be performed by the microcode -+ * inside an EHCI or similar host controller regarding split transactions. The DWC core -+ * interrupts each and every time a split transaction packet is received or sent successfully. -+ * This results in either an interrupt storm when everything is working "properly", or -+ * the interrupt latency of the system in general breaks time-sensitive periodic split -+ * transactions. Pushing the low-level, but relatively easy state machine work into the FIQ -+ * solves these problems. -+ * -+ * Return: void -+ */ -+void notrace dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels) -+{ -+ gintsts_data_t gintsts, gintsts_handled; -+ gintmsk_data_t gintmsk; -+ //hfnum_data_t hfnum; -+ haint_data_t haint, haint_handled; -+ haintmsk_data_t haintmsk; -+ int kick_irq = 0; -+ -+ gintsts_handled.d32 = 0; -+ haint_handled.d32 = 0; -+ -+ fiq_fsm_spin_lock(&state->lock); -+ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); -+ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); -+ gintsts.d32 &= gintmsk.d32; -+ -+ if (gintsts.b.sofintr) { -+ /* For FSM mode, SOF is required to keep the state machine advance for -+ * certain stages of the periodic pipeline. It's death to mask this -+ * interrupt in that case. -+ */ -+ -+ if (!fiq_fsm_do_sof(state, num_channels)) { -+ /* Kick IRQ once. Queue advancement means that all pending transactions -+ * will get serviced when the IRQ finally executes. -+ */ -+ if (state->gintmsk_saved.b.sofintr == 1) -+ kick_irq |= 1; -+ state->gintmsk_saved.b.sofintr = 0; -+ } -+ gintsts_handled.b.sofintr = 1; -+ } -+ -+ if (gintsts.b.hcintr) { -+ int i; -+ haint.d32 = FIQ_READ(state->dwc_regs_base + HAINT); -+ haintmsk.d32 = FIQ_READ(state->dwc_regs_base + HAINTMSK); -+ haint.d32 &= haintmsk.d32; -+ haint_handled.d32 = 0; -+ for (i=0; i<num_channels; i++) { -+ if (haint.b2.chint & (1 << i)) { -+ if(!fiq_fsm_do_hcintr(state, num_channels, i)) { -+ /* HCINT was not handled in FIQ -+ * HAINT is level-sensitive, leading to level-sensitive ginststs.b.hcint bit. -+ * Mask HAINT(i) but keep top-level hcint unmasked. -+ */ -+ state->haintmsk_saved.b2.chint &= ~(1 << i); -+ } else { -+ /* do_hcintr cleaned up after itself, but clear haint */ -+ haint_handled.b2.chint |= (1 << i); -+ } -+ } -+ } -+ -+ if (haint_handled.b2.chint) { -+ FIQ_WRITE(state->dwc_regs_base + HAINT, haint_handled.d32); -+ } -+ -+ if (haintmsk.d32 != (haintmsk.d32 & state->haintmsk_saved.d32)) { -+ /* -+ * This is necessary to avoid multiple retriggers of the MPHI in the case -+ * where interrupts are held off and HCINTs start to pile up. -+ * Only wake up the IRQ if a new interrupt came in, was not handled and was -+ * masked. -+ */ -+ haintmsk.d32 &= state->haintmsk_saved.d32; -+ FIQ_WRITE(state->dwc_regs_base + HAINTMSK, haintmsk.d32); -+ kick_irq |= 1; -+ } -+ /* Top-Level interrupt - always handled because it's level-sensitive */ -+ gintsts_handled.b.hcintr = 1; -+ } -+ -+ -+ /* Clear the bits in the saved register that were not handled but were triggered. */ -+ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); -+ -+ /* FIQ didn't handle something - mask has changed - write new mask */ -+ if (gintmsk.d32 != (gintmsk.d32 & state->gintmsk_saved.d32)) { -+ gintmsk.d32 &= state->gintmsk_saved.d32; -+ gintmsk.b.sofintr = 1; -+ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); -+// fiq_print(FIQDBG_INT, state, "KICKGINT"); -+// fiq_print(FIQDBG_INT, state, "%08x", gintmsk.d32); -+// fiq_print(FIQDBG_INT, state, "%08x", state->gintmsk_saved.d32); -+ kick_irq |= 1; -+ } -+ -+ if (gintsts_handled.d32) { -+ /* Only applies to edge-sensitive bits in GINTSTS */ -+ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); -+ } -+ -+ /* We got an interrupt, didn't handle it. */ -+ if (kick_irq) { -+ state->mphi_int_count++; -+ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); -+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ -+ } -+ state->fiq_done++; -+ mb(); -+ fiq_fsm_spin_unlock(&state->lock); -+} -+ -+ -+/** -+ * dwc_otg_fiq_nop() - FIQ "lite" -+ * @state: pointer to state struct passed from the banked FIQ mode registers. -+ * -+ * The "nop" handler does not intervene on any interrupts other than SOF. -+ * It is limited in scope to deciding at each SOF if the IRQ SOF handler (which deals -+ * with non-periodic/periodic queues) needs to be kicked. -+ * -+ * This is done to hold off the SOF interrupt, which occurs at a rate of 8000 per second. -+ * -+ * Return: void -+ */ -+void notrace dwc_otg_fiq_nop(struct fiq_state *state) -+{ -+ gintsts_data_t gintsts, gintsts_handled; -+ gintmsk_data_t gintmsk; -+ hfnum_data_t hfnum; -+ -+ fiq_fsm_spin_lock(&state->lock); -+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); -+ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); -+ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK); -+ gintsts.d32 &= gintmsk.d32; -+ gintsts_handled.d32 = 0; -+ -+ if (gintsts.b.sofintr) { -+ if (!state->kick_np_queues && -+ dwc_frame_num_gt(state->next_sched_frame, hfnum.b.frnum)) { -+ /* SOF handled, no work to do, just ACK interrupt */ -+ gintsts_handled.b.sofintr = 1; -+ } else { -+ /* Kick IRQ */ -+ state->gintmsk_saved.b.sofintr = 0; -+ } -+ } -+ -+ /* Reset handled interrupts */ -+ if(gintsts_handled.d32) { -+ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32); -+ } -+ -+ /* Clear the bits in the saved register that were not handled but were triggered. */ -+ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32); -+ -+ /* We got an interrupt, didn't handle it and want to mask it */ -+ if (~(state->gintmsk_saved.d32)) { -+ state->mphi_int_count++; -+ gintmsk.d32 &= state->gintmsk_saved.d32; -+ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32); -+ /* Force a clear before another dummy send */ -+ FIQ_WRITE(state->mphi_regs.intstat, (1<<29)); -+ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send); -+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29)); -+ -+ } -+ state->fiq_done++; -+ mb(); -+ fiq_fsm_spin_unlock(&state->lock); -+} ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h -@@ -0,0 +1,370 @@ -+/* -+ * dwc_otg_fiq_fsm.h - Finite state machine FIQ header definitions -+ * -+ * Copyright (c) 2013 Raspberry Pi Foundation -+ * -+ * Author: Jonathan Bell <jonathan@raspberrypi.org> -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Raspberry Pi nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * This FIQ implements functionality that performs split transactions on -+ * the dwc_otg hardware without any outside intervention. A split transaction -+ * is "queued" by nominating a specific host channel to perform the entirety -+ * of a split transaction. This FIQ will then perform the microframe-precise -+ * scheduling required in each phase of the transaction until completion. -+ * -+ * The FIQ functionality has been surgically implanted into the Synopsys -+ * vendor-provided driver. -+ * -+ */ -+ -+#ifndef DWC_OTG_FIQ_FSM_H_ -+#define DWC_OTG_FIQ_FSM_H_ -+ -+#include "dwc_otg_regs.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_hcd.h" -+#include <linux/kernel.h> -+#include <linux/irqflags.h> -+#include <linux/string.h> -+#include <asm/barrier.h> -+ -+#if 0 -+#define FLAME_ON(x) \ -+do { \ -+ int gpioreg; \ -+ \ -+ gpioreg = readl(__io_address(0x20200000+0x8)); \ -+ gpioreg &= ~(7 << (x-20)*3); \ -+ gpioreg |= 0x1 << (x-20)*3; \ -+ writel(gpioreg, __io_address(0x20200000+0x8)); \ -+ \ -+ writel(1<<x, __io_address(0x20200000+(0x1C))); \ -+} while (0) -+ -+#define FLAME_OFF(x) \ -+do { \ -+ writel(1<<x, __io_address(0x20200000+(0x28))); \ -+} while (0) -+#else -+#define FLAME_ON(x) do { } while (0) -+#define FLAME_OFF(X) do { } while (0) -+#endif -+ -+/* This is a quick-and-dirty arch-specific register read/write. We know that -+ * writes to a peripheral on BCM2835 will always arrive in-order, also that -+ * reads and writes are executed in-order therefore the need for memory barriers -+ * is obviated if we're only talking to USB. -+ */ -+#define FIQ_WRITE(_addr_,_data_) (*(volatile unsigned int *) (_addr_) = (_data_)) -+#define FIQ_READ(_addr_) (*(volatile unsigned int *) (_addr_)) -+ -+/* FIQ-ified register definitions. Offsets are from dwc_regs_base. */ -+#define GINTSTS 0x014 -+#define GINTMSK 0x018 -+/* Debug register. Poll the top of the received packets FIFO. */ -+#define GRXSTSR 0x01C -+#define HFNUM 0x408 -+#define HAINT 0x414 -+#define HAINTMSK 0x418 -+#define HPRT0 0x440 -+ -+/* HC_regs start from an offset of 0x500 */ -+#define HC_START 0x500 -+#define HC_OFFSET 0x020 -+ -+#define HC_DMA 0x514 -+ -+#define HCCHAR 0x00 -+#define HCSPLT 0x04 -+#define HCINT 0x08 -+#define HCINTMSK 0x0C -+#define HCTSIZ 0x10 -+ -+#define ISOC_XACTPOS_ALL 0b11 -+#define ISOC_XACTPOS_BEGIN 0b10 -+#define ISOC_XACTPOS_MID 0b00 -+#define ISOC_XACTPOS_END 0b01 -+ -+#define DWC_PID_DATA2 0b01 -+#define DWC_PID_MDATA 0b11 -+#define DWC_PID_DATA1 0b10 -+#define DWC_PID_DATA0 0b00 -+ -+typedef struct { -+ volatile void* base; -+ volatile void* ctrl; -+ volatile void* outdda; -+ volatile void* outddb; -+ volatile void* intstat; -+} mphi_regs_t; -+ -+enum fiq_debug_level { -+ FIQDBG_SCHED = (1 << 0), -+ FIQDBG_INT = (1 << 1), -+ FIQDBG_ERR = (1 << 2), -+ FIQDBG_PORTHUB = (1 << 3), -+}; -+ -+typedef struct { -+ union { -+ uint32_t slock; -+ struct _tickets { -+ uint16_t owner; -+ uint16_t next; -+ } tickets; -+ }; -+} fiq_lock_t; -+ -+struct fiq_state; -+ -+extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...); -+#if 0 -+#define fiq_print _fiq_print -+#else -+#define fiq_print(x, y, ...) -+#endif -+ -+extern bool fiq_enable, fiq_fsm_enable; -+extern ushort nak_holdoff; -+ -+/** -+ * enum fiq_fsm_state - The FIQ FSM states. -+ * -+ * This is the "core" of the FIQ FSM. Broadly, the FSM states follow the -+ * USB2.0 specification for host responses to various transaction states. -+ * There are modifications to this host state machine because of a variety of -+ * quirks and limitations in the dwc_otg hardware. -+ * -+ * The fsm state is also used to communicate back to the driver on completion of -+ * a split transaction. The end states are used in conjunction with the interrupts -+ * raised by the final transaction. -+ */ -+enum fiq_fsm_state { -+ /* FIQ isn't enabled for this host channel */ -+ FIQ_PASSTHROUGH = 0, -+ /* For the first interrupt received for this channel, -+ * the FIQ has to ack any interrupts indicating success. */ -+ FIQ_PASSTHROUGH_ERRORSTATE = 31, -+ /* Nonperiodic state groups */ -+ FIQ_NP_SSPLIT_STARTED = 1, -+ FIQ_NP_SSPLIT_RETRY = 2, -+ FIQ_NP_OUT_CSPLIT_RETRY = 3, -+ FIQ_NP_IN_CSPLIT_RETRY = 4, -+ FIQ_NP_SPLIT_DONE = 5, -+ FIQ_NP_SPLIT_LS_ABORTED = 6, -+ /* This differentiates a HS transaction error from a LS one -+ * (handling the hub state is different) */ -+ FIQ_NP_SPLIT_HS_ABORTED = 7, -+ -+ /* Periodic state groups */ -+ /* Periodic transactions are either started directly by the IRQ handler -+ * or deferred if the TT is already in use. -+ */ -+ FIQ_PER_SSPLIT_QUEUED = 8, -+ FIQ_PER_SSPLIT_STARTED = 9, -+ FIQ_PER_SSPLIT_LAST = 10, -+ -+ -+ FIQ_PER_ISO_OUT_PENDING = 11, -+ FIQ_PER_ISO_OUT_ACTIVE = 12, -+ FIQ_PER_ISO_OUT_LAST = 13, -+ FIQ_PER_ISO_OUT_DONE = 27, -+ -+ FIQ_PER_CSPLIT_WAIT = 14, -+ FIQ_PER_CSPLIT_NYET1 = 15, -+ FIQ_PER_CSPLIT_BROKEN_NYET1 = 28, -+ FIQ_PER_CSPLIT_NYET_FAFF = 29, -+ /* For multiple CSPLITs (large isoc IN, or delayed interrupt) */ -+ FIQ_PER_CSPLIT_POLL = 16, -+ /* The last CSPLIT for a transaction has been issued, differentiates -+ * for the state machine to queue the next packet. -+ */ -+ FIQ_PER_CSPLIT_LAST = 17, -+ -+ FIQ_PER_SPLIT_DONE = 18, -+ FIQ_PER_SPLIT_LS_ABORTED = 19, -+ FIQ_PER_SPLIT_HS_ABORTED = 20, -+ FIQ_PER_SPLIT_NYET_ABORTED = 21, -+ /* Frame rollover has occurred without the transaction finishing. */ -+ FIQ_PER_SPLIT_TIMEOUT = 22, -+ -+ /* FIQ-accelerated HS Isochronous state groups */ -+ FIQ_HS_ISOC_TURBO = 23, -+ /* For interval > 1, SOF wakes up the isochronous FSM */ -+ FIQ_HS_ISOC_SLEEPING = 24, -+ FIQ_HS_ISOC_DONE = 25, -+ FIQ_HS_ISOC_ABORTED = 26, -+ FIQ_DEQUEUE_ISSUED = 30, -+ FIQ_TEST = 32, -+}; -+ -+struct fiq_stack { -+ int magic1; -+ uint8_t stack[2048]; -+ int magic2; -+}; -+ -+ -+/** -+ * struct fiq_dma_info - DMA bounce buffer utilisation information (per-channel) -+ * @index: Number of slots reported used for IN transactions / number of slots -+ * transmitted for an OUT transaction -+ * @slot_len[6]: Number of actual transfer bytes in each slot (255 if unused) -+ * -+ * Split transaction transfers can have variable length depending on other bus -+ * traffic. The OTG core DMA engine requires 4-byte aligned addresses therefore -+ * each transaction needs a guaranteed aligned address. A maximum of 6 split transfers -+ * can happen per-frame. -+ */ -+struct fiq_dma_info { -+ u8 index; -+ u8 slot_len[6]; -+}; -+ -+struct __attribute__((packed)) fiq_split_dma_slot { -+ u8 buf[188]; -+}; -+ -+struct fiq_dma_channel { -+ struct __attribute__((packed)) fiq_split_dma_slot index[6]; -+}; -+ -+struct fiq_dma_blob { -+ struct __attribute__((packed)) fiq_dma_channel channel[0]; -+}; -+ -+/** -+ * struct fiq_hs_isoc_info - USB2.0 isochronous data -+ * @iso_frame: Pointer to the array of OTG URB iso_frame_descs. -+ * @nrframes: Total length of iso_frame_desc array -+ * @index: Current index (FIQ-maintained) -+ * @stride: Interval in uframes between HS isoc transactions -+ */ -+struct fiq_hs_isoc_info { -+ struct dwc_otg_hcd_iso_packet_desc *iso_desc; -+ unsigned int nrframes; -+ unsigned int index; -+ unsigned int stride; -+}; -+ -+/** -+ * struct fiq_channel_state - FIQ state machine storage -+ * @fsm: Current state of the channel as understood by the FIQ -+ * @nr_errors: Number of transaction errors on this split-transaction -+ * @hub_addr: SSPLIT/CSPLIT destination hub -+ * @port_addr: SSPLIT/CSPLIT destination port - always 1 if single TT hub -+ * @nrpackets: For isoc OUT, the number of split-OUT packets to transmit. For -+ * split-IN, number of CSPLIT data packets that were received. -+ * @hcchar_copy: -+ * @hcsplt_copy: -+ * @hcintmsk_copy: -+ * @hctsiz_copy: Copies of the host channel registers. -+ * For use as scratch, or for returning state. -+ * -+ * The fiq_channel_state is state storage between interrupts for a host channel. The -+ * FSM state is stored here. Members of this structure must only be set up by the -+ * driver prior to enabling the FIQ for this host channel, and not touched until the FIQ -+ * has updated the state to either a COMPLETE state group or ABORT state group. -+ */ -+ -+struct fiq_channel_state { -+ enum fiq_fsm_state fsm; -+ unsigned int nr_errors; -+ unsigned int hub_addr; -+ unsigned int port_addr; -+ /* Hardware bug workaround: sometimes channel halt interrupts are -+ * delayed until the next SOF. Keep track of when we expected to get interrupted. */ -+ unsigned int expected_uframe; -+ /* number of uframes remaining (for interval > 1 HS isoc transfers) before next transfer */ -+ unsigned int uframe_sleeps; -+ /* in/out for communicating number of dma buffers used, or number of ISOC to do */ -+ unsigned int nrpackets; -+ struct fiq_dma_info dma_info; -+ struct fiq_hs_isoc_info hs_isoc_info; -+ /* Copies of HC registers - in/out communication from/to IRQ handler -+ * and for ease of channel setup. A bit of mungeing is performed - for -+ * example the hctsiz.b.maxp is _always_ the max packet size of the endpoint. -+ */ -+ hcchar_data_t hcchar_copy; -+ hcsplt_data_t hcsplt_copy; -+ hcint_data_t hcint_copy; -+ hcintmsk_data_t hcintmsk_copy; -+ hctsiz_data_t hctsiz_copy; -+ hcdma_data_t hcdma_copy; -+}; -+ -+/** -+ * struct fiq_state - top-level FIQ state machine storage -+ * @mphi_regs: virtual address of the MPHI peripheral register file -+ * @dwc_regs_base: virtual address of the base of the DWC core register file -+ * @dma_base: physical address for the base of the DMA bounce buffers -+ * @dummy_send: Scratch area for sending a fake message to the MPHI peripheral -+ * @gintmsk_saved: Top-level mask of interrupts that the FIQ has not handled. -+ * Used for determining which interrupts fired to set off the IRQ handler. -+ * @haintmsk_saved: Mask of interrupts from host channels that the FIQ did not handle internally. -+ * @np_count: Non-periodic transactions in the active queue -+ * @np_sent: Count of non-periodic transactions that have completed -+ * @next_sched_frame: For periodic transactions handled by the driver's SOF-driven queuing mechanism, -+ * this is the next frame on which a SOF interrupt is required. Used to hold off -+ * passing SOF through to the driver until necessary. -+ * @channel[n]: Per-channel FIQ state. Allocated during init depending on the number of host -+ * channels configured into the core logic. -+ * -+ * This is passed as the first argument to the dwc_otg_fiq_fsm top-level FIQ handler from the asm stub. -+ * It contains top-level state information. -+ */ -+struct fiq_state { -+ fiq_lock_t lock; -+ mphi_regs_t mphi_regs; -+ void *dwc_regs_base; -+ dma_addr_t dma_base; -+ struct fiq_dma_blob *fiq_dmab; -+ void *dummy_send; -+ gintmsk_data_t gintmsk_saved; -+ haintmsk_data_t haintmsk_saved; -+ int mphi_int_count; -+ unsigned int fiq_done; -+ unsigned int kick_np_queues; -+ unsigned int next_sched_frame; -+#ifdef FIQ_DEBUG -+ char * buffer; -+ unsigned int bufsiz; -+#endif -+ struct fiq_channel_state channel[0]; -+}; -+ -+extern void fiq_fsm_spin_lock(fiq_lock_t *lock); -+ -+extern void fiq_fsm_spin_unlock(fiq_lock_t *lock); -+ -+extern int fiq_fsm_too_late(struct fiq_state *st, int n); -+ -+extern int fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n); -+ -+extern void dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels); -+ -+extern void dwc_otg_fiq_nop(struct fiq_state *state); -+ -+#endif /* DWC_OTG_FIQ_FSM_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S -@@ -0,0 +1,80 @@ -+/* -+ * dwc_otg_fiq_fsm.S - assembly stub for the FSM FIQ -+ * -+ * Copyright (c) 2013 Raspberry Pi Foundation -+ * -+ * Author: Jonathan Bell <jonathan@raspberrypi.org> -+ * All rights reserved. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Raspberry Pi nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND -+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+ -+#include <asm/assembler.h> -+#include <linux/linkage.h> -+ -+ -+.text -+ -+.global _dwc_otg_fiq_stub_end; -+ -+/** -+ * _dwc_otg_fiq_stub() - entry copied to the FIQ vector page to allow -+ * a C-style function call with arguments from the FIQ banked registers. -+ * r0 = &hcd->fiq_state -+ * r1 = &hcd->num_channels -+ * r2 = &hcd->dma_buffers -+ * Tramples: r0, r1, r2, r4, fp, ip -+ */ -+ -+ENTRY(_dwc_otg_fiq_stub) -+ /* Stash unbanked regs - SP will have been set up for us */ -+ mov ip, sp; -+ stmdb sp!, {r0-r12, lr}; -+#ifdef FIQ_DEBUG -+ // Cycle profiling - read cycle counter at start -+ mrc p15, 0, r5, c15, c12, 1; -+#endif -+ /* r11 = fp, don't trample it */ -+ mov r4, fp; -+ /* set EABI frame size */ -+ sub fp, ip, #512; -+ -+ /* for fiq NOP mode - just need state */ -+ mov r0, r8; -+ /* r9 = num_channels */ -+ mov r1, r9; -+ /* r10 = struct *dma_bufs */ -+// mov r2, r10; -+ -+ /* r4 = &fiq_c_function */ -+ blx r4; -+#ifdef FIQ_DEBUG -+ mrc p15, 0, r4, c15, c12, 1; -+ subs r5, r5, r4; -+ // r5 is now the cycle count time for executing the FIQ. Store it somewhere? -+#endif -+ ldmia sp!, {r0-r12, lr}; -+ subs pc, lr, #4; -+_dwc_otg_fiq_stub_end: -+END(_dwc_otg_fiq_stub) ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -0,0 +1,4260 @@ -+ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ -+ * $Revision: #104 $ -+ * $Date: 2011/10/24 $ -+ * $Change: 1871159 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** @file -+ * This file implements HCD Core. All code in this file is portable and doesn't -+ * use any OS specific functions. -+ * Interface provided by HCD Core is defined in <code><hcd_if.h></code> -+ * header file. -+ */ -+ -+#include <linux/usb.h> -+#include <linux/usb/hcd.h> -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+#include "dwc_otg_fiq_fsm.h" -+ -+extern bool microframe_schedule; -+extern uint16_t fiq_fsm_mask, nak_holdoff; -+ -+//#define DEBUG_HOST_CHANNELS -+#ifdef DEBUG_HOST_CHANNELS -+static int last_sel_trans_num_per_scheduled = 0; -+static int last_sel_trans_num_nonper_scheduled = 0; -+static int last_sel_trans_num_avail_hc_at_start = 0; -+static int last_sel_trans_num_avail_hc_at_end = 0; -+#endif /* DEBUG_HOST_CHANNELS */ -+ -+ -+dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void) -+{ -+ return DWC_ALLOC(sizeof(dwc_otg_hcd_t)); -+} -+ -+/** -+ * Connection timeout function. An OTG host is required to display a -+ * message if the device does not connect within 10 seconds. -+ */ -+void dwc_otg_hcd_connect_timeout(void *ptr) -+{ -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr); -+ DWC_PRINTF("Connect Timeout\n"); -+ __DWC_ERROR("Device Not Connected/Responding\n"); -+} -+ -+#if defined(DEBUG) -+static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ if (qh->channel != NULL) { -+ dwc_hc_t *hc = qh->channel; -+ dwc_list_link_t *item; -+ dwc_otg_qh_t *qh_item; -+ int num_channels = hcd->core_if->core_params->host_channels; -+ int i; -+ -+ dwc_otg_hc_regs_t *hc_regs; -+ hcchar_data_t hcchar; -+ hcsplt_data_t hcsplt; -+ hctsiz_data_t hctsiz; -+ uint32_t hcdma; -+ -+ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ hcdma = DWC_READ_REG32(&hc_regs->hcdma); -+ -+ DWC_PRINTF(" Assigned to channel %p:\n", hc); -+ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, -+ hcsplt.d32); -+ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, -+ hcdma); -+ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", -+ hc->dev_addr, hc->ep_num, hc->ep_is_in); -+ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); -+ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); -+ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); -+ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); -+ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); -+ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); -+ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); -+ DWC_PRINTF(" qh: %p\n", hc->qh); -+ DWC_PRINTF(" NP inactive sched:\n"); -+ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) { -+ qh_item = -+ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); -+ DWC_PRINTF(" %p\n", qh_item); -+ } -+ DWC_PRINTF(" NP active sched:\n"); -+ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) { -+ qh_item = -+ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); -+ DWC_PRINTF(" %p\n", qh_item); -+ } -+ DWC_PRINTF(" Channels: \n"); -+ for (i = 0; i < num_channels; i++) { -+ dwc_hc_t *hc = hcd->hc_ptr_array[i]; -+ DWC_PRINTF(" %2d: %p\n", i, hc); -+ } -+ } -+} -+#else -+#define dump_channel_info(hcd, qh) -+#endif /* DEBUG */ -+ -+/** -+ * Work queue function for starting the HCD when A-Cable is connected. -+ * The hcd_start() must be called in a process context. -+ */ -+static void hcd_start_func(void *_vp) -+{ -+ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd); -+ if (hcd) { -+ hcd->fops->start(hcd); -+ } -+} -+ -+static void del_xfer_timers(dwc_otg_hcd_t * hcd) -+{ -+#ifdef DEBUG -+ int i; -+ int num_channels = hcd->core_if->core_params->host_channels; -+ for (i = 0; i < num_channels; i++) { -+ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]); -+ } -+#endif -+} -+ -+static void del_timers(dwc_otg_hcd_t * hcd) -+{ -+ del_xfer_timers(hcd); -+ DWC_TIMER_CANCEL(hcd->conn_timer); -+} -+ -+/** -+ * Processes all the URBs in a single list of QHs. Completes them with -+ * -ESHUTDOWN and frees the QTD. -+ */ -+static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) -+{ -+ dwc_list_link_t *qh_item, *qh_tmp; -+ dwc_otg_qh_t *qh; -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ -+ DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) { -+ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, -+ &qh->qtd_list, qtd_list_entry) { -+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ if (qtd->urb != NULL) { -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_SHUTDOWN); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ } -+ -+ } -+ if(qh->channel) { -+ /* Using hcchar.chen == 1 is not a reliable test. -+ * It is possible that the channel has already halted -+ * but not yet been through the IRQ handler. -+ */ -+ dwc_otg_hc_halt(hcd->core_if, qh->channel, -+ DWC_OTG_HC_XFER_URB_DEQUEUE); -+ if(microframe_schedule) -+ hcd->available_host_channels++; -+ qh->channel = NULL; -+ } -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } -+} -+ -+/** -+ * Responds with an error status of ESHUTDOWN to all URBs in the non-periodic -+ * and periodic schedules. The QTD associated with each URB is removed from -+ * the schedule and freed. This function may be called when a disconnect is -+ * detected or when the HCD is being stopped. -+ */ -+static void kill_all_urbs(dwc_otg_hcd_t * hcd) -+{ -+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); -+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); -+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); -+} -+ -+/** -+ * Start the connection timer. An OTG host is required to display a -+ * message if the device does not connect within 10 seconds. The -+ * timer is deleted if a port connect interrupt occurs before the -+ * timer expires. -+ */ -+static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd) -+{ -+ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ ); -+} -+ -+/** -+ * HCD Callback function for disconnect of the HCD. -+ * -+ * @param p void pointer to the <code>struct usb_hcd</code> -+ */ -+static int32_t dwc_otg_hcd_session_start_cb(void *p) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd; -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); -+ dwc_otg_hcd = p; -+ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); -+ return 1; -+} -+ -+/** -+ * HCD Callback function for starting the HCD when A-Cable is -+ * connected. -+ * -+ * @param p void pointer to the <code>struct usb_hcd</code> -+ */ -+static int32_t dwc_otg_hcd_start_cb(void *p) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = p; -+ dwc_otg_core_if_t *core_if; -+ hprt0_data_t hprt0; -+ -+ core_if = dwc_otg_hcd->core_if; -+ -+ if (core_if->op_state == B_HOST) { -+ /* -+ * Reset the port. During a HNP mode switch the reset -+ * needs to occur within 1ms and have a duration of at -+ * least 50ms. -+ */ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtrst = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg, -+ hcd_start_func, dwc_otg_hcd, 50, -+ "start hcd"); -+ -+ return 1; -+} -+ -+/** -+ * HCD Callback function for disconnect of the HCD. -+ * -+ * @param p void pointer to the <code>struct usb_hcd</code> -+ */ -+static int32_t dwc_otg_hcd_disconnect_cb(void *p) -+{ -+ gintsts_data_t intr; -+ dwc_otg_hcd_t *dwc_otg_hcd = p; -+ -+ /* -+ * Set status flags for the hub driver. -+ */ -+ dwc_otg_hcd->flags.b.port_connect_status_change = 1; -+ dwc_otg_hcd->flags.b.port_connect_status = 0; -+ if(fiq_enable) -+ local_fiq_disable(); -+ /* -+ * Shutdown any transfers in process by clearing the Tx FIFO Empty -+ * interrupt mask and status bits and disabling subsequent host -+ * channel interrupts. -+ */ -+ intr.d32 = 0; -+ intr.b.nptxfempty = 1; -+ intr.b.ptxfempty = 1; -+ intr.b.hcintr = 1; -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, -+ intr.d32, 0); -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, -+ intr.d32, 0); -+ -+ del_timers(dwc_otg_hcd); -+ -+ /* -+ * Turn off the vbus power only if the core has transitioned to device -+ * mode. If still in host mode, need to keep power on to detect a -+ * reconnection. -+ */ -+ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { -+ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ DWC_PRINTF("Disconnect: PortPower off\n"); -+ hprt0.b.prtpwr = 0; -+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, -+ hprt0.d32); -+ } -+ -+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); -+ } -+ -+ /* Respond with an error status to all URBs in the schedule. */ -+ kill_all_urbs(dwc_otg_hcd); -+ -+ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { -+ /* Clean up any host channels that were in use. */ -+ int num_channels; -+ int i; -+ dwc_hc_t *channel; -+ dwc_otg_hc_regs_t *hc_regs; -+ hcchar_data_t hcchar; -+ -+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; -+ -+ if (!dwc_otg_hcd->core_if->dma_enable) { -+ /* Flush out any channel requests in slave mode. */ -+ for (i = 0; i < num_channels; i++) { -+ channel = dwc_otg_hcd->hc_ptr_array[i]; -+ if (DWC_CIRCLEQ_EMPTY_ENTRY -+ (channel, hc_list_entry)) { -+ hc_regs = -+ dwc_otg_hcd->core_if-> -+ host_if->hc_regs[i]; -+ hcchar.d32 = -+ DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chen = 0; -+ hcchar.b.chdis = 1; -+ hcchar.b.epdir = 0; -+ DWC_WRITE_REG32 -+ (&hc_regs->hcchar, -+ hcchar.d32); -+ } -+ } -+ } -+ } -+ -+ for (i = 0; i < num_channels; i++) { -+ channel = dwc_otg_hcd->hc_ptr_array[i]; -+ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) { -+ hc_regs = -+ dwc_otg_hcd->core_if->host_if->hc_regs[i]; -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ /* Halt the channel. */ -+ hcchar.b.chdis = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, -+ hcchar.d32); -+ } -+ -+ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, -+ channel); -+ DWC_CIRCLEQ_INSERT_TAIL -+ (&dwc_otg_hcd->free_hc_list, channel, -+ hc_list_entry); -+ /* -+ * Added for Descriptor DMA to prevent channel double cleanup -+ * in release_channel_ddma(). Which called from ep_disable -+ * when device disconnect. -+ */ -+ channel->qh = NULL; -+ } -+ } -+ if(fiq_fsm_enable) { -+ for(i=0; i < 128; i++) { -+ dwc_otg_hcd->hub_port[i] = 0; -+ } -+ } -+ -+ } -+ -+ if(fiq_enable) -+ local_fiq_enable(); -+ -+ if (dwc_otg_hcd->fops->disconnect) { -+ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd); -+ } -+ -+ return 1; -+} -+ -+/** -+ * HCD Callback function for stopping the HCD. -+ * -+ * @param p void pointer to the <code>struct usb_hcd</code> -+ */ -+static int32_t dwc_otg_hcd_stop_cb(void *p) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = p; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); -+ dwc_otg_hcd_stop(dwc_otg_hcd); -+ return 1; -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * HCD Callback function for sleep of HCD. -+ * -+ * @param p void pointer to the <code>struct usb_hcd</code> -+ */ -+static int dwc_otg_hcd_sleep_cb(void *p) -+{ -+ dwc_otg_hcd_t *hcd = p; -+ -+ dwc_otg_hcd_free_hc_from_lpm(hcd); -+ -+ return 0; -+} -+#endif -+ -+ -+/** -+ * HCD Callback function for Remote Wakeup. -+ * -+ * @param p void pointer to the <code>struct usb_hcd</code> -+ */ -+static int dwc_otg_hcd_rem_wakeup_cb(void *p) -+{ -+ dwc_otg_hcd_t *hcd = p; -+ -+ if (hcd->core_if->lx_state == DWC_OTG_L2) { -+ hcd->flags.b.port_suspend_change = 1; -+ } -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ else { -+ hcd->flags.b.port_l1_change = 1; -+ } -+#endif -+ return 0; -+} -+ -+/** -+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are -+ * stopped. -+ */ -+void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd) -+{ -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); -+ -+ /* -+ * The root hub should be disconnected before this function is called. -+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) -+ * and the QH lists (via ..._hcd_endpoint_disable). -+ */ -+ -+ /* Turn off all host-specific interrupts. */ -+ dwc_otg_disable_host_interrupts(hcd->core_if); -+ -+ /* Turn off the vbus power */ -+ DWC_PRINTF("PortPower off\n"); -+ hprt0.b.prtpwr = 0; -+ DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32); -+ dwc_mdelay(1); -+} -+ -+int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle, -+ int atomic_alloc) -+{ -+ int retval = 0; -+ uint8_t needs_scheduling = 0; -+ dwc_otg_transaction_type_e tr_type; -+ dwc_otg_qtd_t *qtd; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ hprt0_data_t hprt0 = { .d32 = 0 }; -+ -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ if (NULL == hcd->core_if) { -+ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n"); -+ /* No longer connected. */ -+ return -DWC_E_INVALID; -+ } -+#endif -+ if (!hcd->flags.b.port_connect_status) { -+ /* No longer connected. */ -+ DWC_ERROR("Not connected\n"); -+ return -DWC_E_NO_DEVICE; -+ } -+ -+ /* Some core configurations cannot support LS traffic on a FS root port */ -+ if ((hcd->fops->speed(hcd, dwc_otg_urb->priv) == USB_SPEED_LOW) && -+ (hcd->core_if->hwcfg2.b.fs_phy_type == 1) && -+ (hcd->core_if->hwcfg2.b.hs_phy_type == 1)) { -+ hprt0.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) { -+ return -DWC_E_NO_DEVICE; -+ } -+ } -+ -+ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc); -+ if (qtd == NULL) { -+ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ if (qtd->urb == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+ if (qtd->urb->priv == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n"); -+ return -DWC_E_NO_MEMORY; -+ } -+#endif -+ intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk); -+ if(!intr_mask.b.sofintr || fiq_enable) needs_scheduling = 1; -+ if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) -+ /* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */ -+ needs_scheduling = 0; -+ -+ retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc); -+ // creates a new queue in ep_handle if it doesn't exist already -+ if (retval < 0) { -+ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " -+ "Error status %d\n", retval); -+ dwc_otg_hcd_qtd_free(qtd); -+ return retval; -+ } -+ -+ if(needs_scheduling) { -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE) { -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ } -+ } -+ return retval; -+} -+ -+int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ dwc_otg_qh_t *qh; -+ dwc_otg_qtd_t *urb_qtd; -+ BUG_ON(!hcd); -+ BUG_ON(!dwc_otg_urb); -+ -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ -+ if (hcd == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n"); -+ return -DWC_E_INVALID; -+ } -+ if (dwc_otg_urb == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n"); -+ return -DWC_E_INVALID; -+ } -+ if (dwc_otg_urb->qtd == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n"); -+ return -DWC_E_INVALID; -+ } -+ urb_qtd = dwc_otg_urb->qtd; -+ BUG_ON(!urb_qtd); -+ if (urb_qtd->qh == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n"); -+ return -DWC_E_INVALID; -+ } -+#else -+ urb_qtd = dwc_otg_urb->qtd; -+ BUG_ON(!urb_qtd); -+#endif -+ qh = urb_qtd->qh; -+ BUG_ON(!qh); -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ if (urb_qtd->in_process) { -+ dump_channel_info(hcd, qh); -+ } -+ } -+#ifdef DEBUG /* integrity checks (Broadcom) */ -+ if (hcd->core_if == NULL) { -+ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n"); -+ return -DWC_E_INVALID; -+ } -+#endif -+ if (urb_qtd->in_process && qh->channel) { -+ /* The QTD is in process (it has been assigned to a channel). */ -+ if (hcd->flags.b.port_connect_status) { -+ int n = qh->channel->hc_num; -+ /* -+ * If still connected (i.e. in host mode), halt the -+ * channel so it can be used for other transfers. If -+ * no longer connected, the host registers can't be -+ * written to halt the channel since the core is in -+ * device mode. -+ */ -+ /* In FIQ FSM mode, we need to shut down carefully. -+ * The FIQ may attempt to restart a disabled channel */ -+ if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) { -+ qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; -+ qh->channel->halt_pending = 1; -+ hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED; -+ } else { -+ dwc_otg_hc_halt(hcd->core_if, qh->channel, -+ DWC_OTG_HC_XFER_URB_DEQUEUE); -+ } -+ } -+ } -+ -+ /* -+ * Free the QTD and clean up the associated QH. Leave the QH in the -+ * schedule if it has any remaining QTDs. -+ */ -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - " -+ "delete %sQueue handler\n", -+ hcd->core_if->dma_desc_enable?"DMA ":""); -+ if (!hcd->core_if->dma_desc_enable) { -+ uint8_t b = urb_qtd->in_process; -+ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); -+ if (b) { -+ dwc_otg_hcd_qh_deactivate(hcd, qh, 0); -+ qh->channel = NULL; -+ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } -+ } else { -+ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh); -+ } -+ return 0; -+} -+ -+int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, -+ int retry) -+{ -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ int retval = 0; -+ dwc_irqflags_t flags; -+ -+ if (retry < 0) { -+ retval = -DWC_E_INVALID; -+ goto done; -+ } -+ -+ if (!qh) { -+ retval = -DWC_E_INVALID; -+ goto done; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ -+ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) { -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ retry--; -+ dwc_msleep(5); -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ } -+ -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ /* -+ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove -+ * and qh_free to prevent stack dump on DWC_DMA_FREE() with -+ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free() -+ * and dwc_otg_hcd_frame_list_alloc(). -+ */ -+ dwc_otg_hcd_qh_free(hcd, qh); -+ -+done: -+ return retval; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ int retval = 0; -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ if (!qh) -+ return -DWC_E_INVALID; -+ -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ return retval; -+} -+#endif -+ -+/** -+ * HCD Callback structure for handling mode switching. -+ */ -+static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { -+ .start = dwc_otg_hcd_start_cb, -+ .stop = dwc_otg_hcd_stop_cb, -+ .disconnect = dwc_otg_hcd_disconnect_cb, -+ .session_start = dwc_otg_hcd_session_start_cb, -+ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb, -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ .sleep = dwc_otg_hcd_sleep_cb, -+#endif -+ .p = 0, -+}; -+ -+/** -+ * Reset tasklet function -+ */ -+static void reset_tasklet_func(void *data) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data; -+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; -+ hprt0_data_t hprt0; -+ -+ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtrst = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ dwc_mdelay(60); -+ -+ hprt0.b.prtrst = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ dwc_otg_hcd->flags.b.port_reset_change = 1; -+} -+ -+static void completion_tasklet_func(void *ptr) -+{ -+ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr; -+ struct urb *urb; -+ urb_tq_entry_t *item; -+ dwc_irqflags_t flags; -+ -+ /* This could just be spin_lock_irq */ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) { -+ item = DWC_TAILQ_FIRST(&hcd->completed_urb_list); -+ urb = item->urb; -+ DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item, -+ urb_tq_entries); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ DWC_FREE(item); -+ -+ usb_hcd_giveback_urb(hcd->priv, urb, urb->status); -+ -+ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ return; -+} -+ -+static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list) -+{ -+ dwc_list_link_t *item; -+ dwc_otg_qh_t *qh; -+ dwc_irqflags_t flags; -+ -+ if (!qh_list->next) { -+ /* The list hasn't been initialized yet. */ -+ return; -+ } -+ /* -+ * Hold spinlock here. Not needed in that case if bellow -+ * function is being called from ISR -+ */ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ /* Ensure there are no QTDs or URBs left. */ -+ kill_urbs_in_qh_list(hcd, qh_list); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ -+ DWC_LIST_FOREACH(item, qh_list) { -+ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry); -+ dwc_otg_hcd_qh_remove_and_free(hcd, qh); -+ } -+} -+ -+/** -+ * Exit from Hibernation if Host did not detect SRP from connected SRP capable -+ * Device during SRP time by host power up. -+ */ -+void dwc_otg_hcd_power_up(void *ptr) -+{ -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ -+ DWC_PRINTF("%s called\n", __FUNCTION__); -+ -+ if (!core_if->hibernation_suspend) { -+ DWC_PRINTF("Already exited from Hibernation\n"); -+ return; -+ } -+ -+ /* Switch on the voltage to the core */ -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Reset the core */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Disable power clamps */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ /* Remove reset the core signal */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnrstn = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Disable PMU interrupt */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ core_if->hibernation_suspend = 0; -+ -+ /* Disable PMU */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ dwc_udelay(10); -+ -+ /* Enable VBUS */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0); -+ -+ core_if->op_state = A_HOST; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_hcd_start(core_if); -+} -+ -+void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num) -+{ -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; -+ struct fiq_dma_blob *blob = hcd->fiq_dmab; -+ int i; -+ -+ st->fsm = FIQ_PASSTHROUGH; -+ st->hcchar_copy.d32 = 0; -+ st->hcsplt_copy.d32 = 0; -+ st->hcint_copy.d32 = 0; -+ st->hcintmsk_copy.d32 = 0; -+ st->hctsiz_copy.d32 = 0; -+ st->hcdma_copy.d32 = 0; -+ st->nr_errors = 0; -+ st->hub_addr = 0; -+ st->port_addr = 0; -+ st->expected_uframe = 0; -+ st->nrpackets = 0; -+ st->dma_info.index = 0; -+ for (i = 0; i < 6; i++) -+ st->dma_info.slot_len[i] = 255; -+ st->hs_isoc_info.index = 0; -+ st->hs_isoc_info.iso_desc = NULL; -+ st->hs_isoc_info.nrframes = 0; -+ -+ DWC_MEMSET(&blob->channel[num].index[0], 0x6b, 1128); -+} -+ -+/** -+ * Frees secondary storage associated with the dwc_otg_hcd structure contained -+ * in the struct usb_hcd field. -+ */ -+static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(dwc_otg_hcd); -+ int i; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); -+ -+ del_timers(dwc_otg_hcd); -+ -+ /* Free memory for QH/QTD lists */ -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); -+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); -+ -+ /* Free memory for the host channels. */ -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; -+ -+#ifdef DEBUG -+ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) { -+ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]); -+ } -+#endif -+ if (hc != NULL) { -+ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", -+ i, hc); -+ DWC_FREE(hc); -+ } -+ } -+ -+ if (dwc_otg_hcd->core_if->dma_enable) { -+ if (dwc_otg_hcd->status_buf_dma) { -+ DWC_DMA_FREE(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, -+ dwc_otg_hcd->status_buf, -+ dwc_otg_hcd->status_buf_dma); -+ } -+ } else if (dwc_otg_hcd->status_buf != NULL) { -+ DWC_FREE(dwc_otg_hcd->status_buf); -+ } -+ DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock); -+ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock); -+ /* Set core_if's lock pointer to NULL */ -+ dwc_otg_hcd->core_if->lock = NULL; -+ -+ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer); -+ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet); -+ DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet); -+ DWC_FREE(dwc_otg_hcd->fiq_state); -+ -+#ifdef DWC_DEV_SRPCAP -+ if (dwc_otg_hcd->core_if->power_down == 2 && -+ dwc_otg_hcd->core_if->pwron_timer) { -+ DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer); -+ } -+#endif -+ DWC_FREE(dwc_otg_hcd); -+} -+ -+int init_hcd_usecs(dwc_otg_hcd_t *_hcd); -+ -+int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ int retval = 0; -+ int num_channels; -+ int i; -+ dwc_hc_t *channel; -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->lock); -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->channel_lock); -+#else -+ hcd->lock = DWC_SPINLOCK_ALLOC(); -+ hcd->channel_lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n", -+ hcd, core_if); -+ if (!hcd->lock) { -+ DWC_ERROR("Could not allocate lock for pcd"); -+ DWC_FREE(hcd); -+ retval = -DWC_E_NO_MEMORY; -+ goto out; -+ } -+ hcd->core_if = core_if; -+ -+ /* Register the HCD CIL Callbacks */ -+ dwc_otg_cil_register_hcd_callbacks(hcd->core_if, -+ &hcd_cil_callbacks, hcd); -+ -+ /* Initialize the non-periodic schedule. */ -+ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive); -+ DWC_LIST_INIT(&hcd->non_periodic_sched_active); -+ -+ /* Initialize the periodic schedule. */ -+ DWC_LIST_INIT(&hcd->periodic_sched_inactive); -+ DWC_LIST_INIT(&hcd->periodic_sched_ready); -+ DWC_LIST_INIT(&hcd->periodic_sched_assigned); -+ DWC_LIST_INIT(&hcd->periodic_sched_queued); -+ DWC_TAILQ_INIT(&hcd->completed_urb_list); -+ /* -+ * Create a host channel descriptor for each host channel implemented -+ * in the controller. Initialize the channel descriptor array. -+ */ -+ DWC_CIRCLEQ_INIT(&hcd->free_hc_list); -+ num_channels = hcd->core_if->core_params->host_channels; -+ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array)); -+ for (i = 0; i < num_channels; i++) { -+ channel = DWC_ALLOC(sizeof(dwc_hc_t)); -+ if (channel == NULL) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: host channel allocation failed\n", -+ __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ channel->hc_num = i; -+ hcd->hc_ptr_array[i] = channel; -+#ifdef DEBUG -+ hcd->core_if->hc_xfer_timer[i] = -+ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout, -+ &hcd->core_if->hc_xfer_info[i]); -+#endif -+ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, -+ channel); -+ } -+ -+ if (fiq_enable) { -+ hcd->fiq_state = DWC_ALLOC(sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)); -+ if (!hcd->fiq_state) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: cannot allocate fiq_state structure\n", __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels))); -+ -+ for (i = 0; i < num_channels; i++) { -+ hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH; -+ } -+ hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16); -+ -+ hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack)); -+ if (!hcd->fiq_stack) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: cannot allocate fiq_stack structure\n", __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ hcd->fiq_stack->magic1 = 0xDEADBEEF; -+ hcd->fiq_stack->magic2 = 0xD00DFEED; -+ hcd->fiq_state->gintmsk_saved.d32 = ~0; -+ hcd->fiq_state->haintmsk_saved.b2.chint = ~0; -+ -+ /* This bit is terrible and uses no API, but necessary. The FIQ has no concept of DMA pools -+ * (and if it did, would be a lot slower). This allocates a chunk of memory (~9kiB for 8 host channels) -+ * for use as transaction bounce buffers in a 2-D array. Our access into this chunk is done by some -+ * moderately readable array casts. -+ */ -+ hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base); -+ DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d", -+ (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base, -+ sizeof(struct fiq_dma_channel) * num_channels); -+ -+ DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024); -+ -+ /* pointer for debug in fiq_print */ -+ hcd->fiq_state->fiq_dmab = hcd->fiq_dmab; -+ if (fiq_fsm_enable) { -+ int i; -+ for (i=0; i < hcd->core_if->core_params->host_channels; i++) { -+ dwc_otg_cleanup_fiq_channel(hcd, i); -+ } -+ DWC_PRINTF("FIQ FSM acceleration enabled for :\n%s%s%s%s", -+ (fiq_fsm_mask & 0x1) ? "Non-periodic Split Transactions\n" : "", -+ (fiq_fsm_mask & 0x2) ? "Periodic Split Transactions\n" : "", -+ (fiq_fsm_mask & 0x4) ? "High-Speed Isochronous Endpoints\n" : "", -+ (fiq_fsm_mask & 0x8) ? "Interrupt/Control Split Transaction hack enabled\n" : ""); -+ } -+ } -+ -+ /* Initialize the Connection timeout timer. */ -+ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer", -+ dwc_otg_hcd_connect_timeout, 0); -+ -+ printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled"); -+ if (microframe_schedule) -+ init_hcd_usecs(hcd); -+ -+ /* Initialize reset tasklet. */ -+ hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd); -+ -+ hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet", -+ completion_tasklet_func, hcd); -+#ifdef DWC_DEV_SRPCAP -+ if (hcd->core_if->power_down == 2) { -+ /* Initialize Power on timer for Host power up in case hibernation */ -+ hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER", -+ dwc_otg_hcd_power_up, core_if); -+ } -+#endif -+ -+ /* -+ * Allocate space for storing data on status transactions. Normally no -+ * data is sent, but this space acts as a bit bucket. This must be -+ * done after usb_add_hcd since that function allocates the DMA buffer -+ * pool. -+ */ -+ if (hcd->core_if->dma_enable) { -+ hcd->status_buf = -+ DWC_DMA_ALLOC(dev, DWC_OTG_HCD_STATUS_BUF_SIZE, -+ &hcd->status_buf_dma); -+ } else { -+ hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE); -+ } -+ if (!hcd->status_buf) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: status_buf allocation failed\n", __func__); -+ dwc_otg_hcd_free(hcd); -+ goto out; -+ } -+ -+ hcd->otg_port = 1; -+ hcd->frame_list = NULL; -+ hcd->frame_list_dma = 0; -+ hcd->periodic_qh_count = 0; -+ -+ DWC_MEMSET(hcd->hub_port, 0, sizeof(hcd->hub_port)); -+#ifdef FIQ_DEBUG -+ DWC_MEMSET(hcd->hub_port_alloc, -1, sizeof(hcd->hub_port_alloc)); -+#endif -+ -+out: -+ return retval; -+} -+ -+void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd) -+{ -+ /* Turn off all host-specific interrupts. */ -+ dwc_otg_disable_host_interrupts(hcd->core_if); -+ -+ dwc_otg_hcd_free(hcd); -+} -+ -+/** -+ * Initializes dynamic portions of the DWC_otg HCD state. -+ */ -+static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd) -+{ -+ int num_channels; -+ int i; -+ dwc_hc_t *channel; -+ dwc_hc_t *channel_tmp; -+ -+ hcd->flags.d32 = 0; -+ -+ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; -+ if (!microframe_schedule) { -+ hcd->non_periodic_channels = 0; -+ hcd->periodic_channels = 0; -+ } else { -+ hcd->available_host_channels = hcd->core_if->core_params->host_channels; -+ } -+ /* -+ * Put all channels in the free channel list and clean up channel -+ * states. -+ */ -+ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp, -+ &hcd->free_hc_list, hc_list_entry) { -+ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry); -+ } -+ -+ num_channels = hcd->core_if->core_params->host_channels; -+ for (i = 0; i < num_channels; i++) { -+ channel = hcd->hc_ptr_array[i]; -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel, -+ hc_list_entry); -+ dwc_otg_hc_cleanup(hcd->core_if, channel); -+ } -+ -+ /* Initialize the DWC core for host mode operation. */ -+ dwc_otg_core_host_init(hcd->core_if); -+ -+ /* Set core_if's lock pointer to the hcd->lock */ -+ hcd->core_if->lock = hcd->lock; -+} -+ -+/** -+ * Assigns transactions from a QTD to a free host channel and initializes the -+ * host channel to perform the transactions. The host channel is removed from -+ * the free list. -+ * -+ * @param hcd The HCD state structure. -+ * @param qh Transactions from the first QTD for this QH are selected and -+ * assigned to a free host channel. -+ */ -+static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ dwc_hc_t *hc; -+ dwc_otg_qtd_t *qtd; -+ dwc_otg_hcd_urb_t *urb; -+ void* ptr = NULL; -+ uint32_t intr_enable; -+ unsigned long flags; -+ gintmsk_data_t gintmsk = { .d32 = 0, }; -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ -+ urb = qtd->urb; -+ -+ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length); -+ -+ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info)) -+ urb->actual_length = urb->length; -+ -+ -+ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); -+ -+ /* Remove the host channel from the free list. */ -+ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); -+ -+ qh->channel = hc; -+ -+ qtd->in_process = 1; -+ -+ /* -+ * Use usb_pipedevice to determine device address. This address is -+ * 0 before the SET_ADDRESS command and the correct address afterward. -+ */ -+ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info); -+ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info); -+ hc->speed = qh->dev_speed; -+ hc->max_packet = dwc_max_packet(qh->maxp); -+ -+ hc->xfer_started = 0; -+ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; -+ hc->error_state = (qtd->error_count > 0); -+ hc->halt_on_queue = 0; -+ hc->halt_pending = 0; -+ hc->requests = 0; -+ -+ /* -+ * The following values may be modified in the transfer type section -+ * below. The xfer_len value may be reduced when the transfer is -+ * started to accommodate the max widths of the XferSize and PktCnt -+ * fields in the HCTSIZn register. -+ */ -+ -+ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0); -+ if (hc->ep_is_in) { -+ hc->do_ping = 0; -+ } else { -+ hc->do_ping = qh->ping_state; -+ } -+ -+ hc->data_pid_start = qh->data_toggle; -+ hc->multi_count = 1; -+ -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length; -+ -+ /* For non-dword aligned case */ -+ if (((unsigned long)hc->xfer_buff & 0x3) -+ && !hcd->core_if->dma_desc_enable) { -+ ptr = (uint8_t *) urb->buf + urb->actual_length; -+ } -+ } else { -+ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length; -+ } -+ hc->xfer_len = urb->length - urb->actual_length; -+ hc->xfer_count = 0; -+ -+ /* -+ * Set the split attributes -+ */ -+ hc->do_split = 0; -+ if (qh->do_split) { -+ uint32_t hub_addr, port_addr; -+ hc->do_split = 1; -+ hc->xact_pos = qtd->isoc_split_pos; -+ /* We don't need to do complete splits anymore */ -+// if(fiq_fsm_enable) -+ if (0) -+ hc->complete_split = qtd->complete_split = 0; -+ else -+ hc->complete_split = qtd->complete_split; -+ -+ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr); -+ hc->hub_addr = (uint8_t) hub_addr; -+ hc->port_addr = (uint8_t) port_addr; -+ } -+ -+ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { -+ case UE_CONTROL: -+ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; -+ switch (qtd->control_phase) { -+ case DWC_OTG_CONTROL_SETUP: -+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); -+ hc->do_ping = 0; -+ hc->ep_is_in = 0; -+ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) urb->setup_dma; -+ } else { -+ hc->xfer_buff = (uint8_t *) urb->setup_packet; -+ } -+ hc->xfer_len = 8; -+ ptr = NULL; -+ break; -+ case DWC_OTG_CONTROL_DATA: -+ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); -+ hc->data_pid_start = qtd->data_toggle; -+ break; -+ case DWC_OTG_CONTROL_STATUS: -+ /* -+ * Direction is opposite of data direction or IN if no -+ * data. -+ */ -+ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); -+ if (urb->length == 0) { -+ hc->ep_is_in = 1; -+ } else { -+ hc->ep_is_in = -+ dwc_otg_hcd_is_pipe_out(&urb->pipe_info); -+ } -+ if (hc->ep_is_in) { -+ hc->do_ping = 0; -+ } -+ -+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; -+ -+ hc->xfer_len = 0; -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma; -+ } else { -+ hc->xfer_buff = (uint8_t *) hcd->status_buf; -+ } -+ ptr = NULL; -+ break; -+ } -+ break; -+ case UE_BULK: -+ hc->ep_type = DWC_OTG_EP_TYPE_BULK; -+ break; -+ case UE_INTERRUPT: -+ hc->ep_type = DWC_OTG_EP_TYPE_INTR; -+ break; -+ case UE_ISOCHRONOUS: -+ { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ -+ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; -+ -+ if (hcd->core_if->dma_desc_enable) -+ break; -+ -+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; -+ -+ frame_desc->status = 0; -+ -+ if (hcd->core_if->dma_enable) { -+ hc->xfer_buff = (uint8_t *) urb->dma; -+ } else { -+ hc->xfer_buff = (uint8_t *) urb->buf; -+ } -+ hc->xfer_buff += -+ frame_desc->offset + qtd->isoc_split_offset; -+ hc->xfer_len = -+ frame_desc->length - qtd->isoc_split_offset; -+ -+ /* For non-dword aligned buffers */ -+ if (((unsigned long)hc->xfer_buff & 0x3) -+ && hcd->core_if->dma_enable) { -+ ptr = -+ (uint8_t *) urb->buf + frame_desc->offset + -+ qtd->isoc_split_offset; -+ } else -+ ptr = NULL; -+ -+ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { -+ if (hc->xfer_len <= 188) { -+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; -+ } else { -+ hc->xact_pos = -+ DWC_HCSPLIT_XACTPOS_BEGIN; -+ } -+ } -+ } -+ break; -+ } -+ /* non DWORD-aligned buffer case */ -+ if (ptr) { -+ uint32_t buf_size; -+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { -+ buf_size = hcd->core_if->core_params->max_transfer_size; -+ } else { -+ buf_size = 4096; -+ } -+ if (!qh->dw_align_buf) { -+ qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(dev, buf_size, -+ &qh->dw_align_buf_dma); -+ if (!qh->dw_align_buf) { -+ DWC_ERROR -+ ("%s: Failed to allocate memory to handle " -+ "non-dword aligned buffer case\n", -+ __func__); -+ return; -+ } -+ } -+ if (!hc->ep_is_in) { -+ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len); -+ } -+ hc->align_buff = qh->dw_align_buf_dma; -+ } else { -+ hc->align_buff = 0; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * This value may be modified when the transfer is started to -+ * reflect the actual transfer length. -+ */ -+ hc->multi_count = dwc_hb_mult(qh->maxp); -+ } -+ -+ if (hcd->core_if->dma_desc_enable) -+ hc->desc_list_addr = qh->desc_list_dma; -+ -+ dwc_otg_hc_init(hcd->core_if, hc); -+ -+ local_irq_save(flags); -+ -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ } -+ -+ /* Enable the top level host channel interrupt. */ -+ intr_enable = (1 << hc->hc_num); -+ DWC_MODIFY_REG32(&hcd->core_if->host_if->host_global_regs->haintmsk, 0, intr_enable); -+ -+ /* Make sure host channel interrupts are enabled. */ -+ gintmsk.b.hcintr = 1; -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); -+ -+ if (fiq_enable) { -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } -+ -+ local_irq_restore(flags); -+ hc->qh = qh; -+} -+ -+ -+/** -+ * fiq_fsm_transaction_suitable() - Test a QH for compatibility with the FIQ -+ * @qh: pointer to the endpoint's queue head -+ * -+ * Transaction start/end control flow is grafted onto the existing dwc_otg -+ * mechanisms, to avoid spaghettifying the functions more than they already are. -+ * This function's eligibility check is altered by debug parameter. -+ * -+ * Returns: 0 for unsuitable, 1 implies the FIQ can be enabled for this transaction. -+ */ -+ -+int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh) -+{ -+ if (qh->do_split) { -+ switch (qh->ep_type) { -+ case UE_CONTROL: -+ case UE_BULK: -+ if (fiq_fsm_mask & (1 << 0)) -+ return 1; -+ break; -+ case UE_INTERRUPT: -+ case UE_ISOCHRONOUS: -+ if (fiq_fsm_mask & (1 << 1)) -+ return 1; -+ break; -+ default: -+ break; -+ } -+ } else if (qh->ep_type == UE_ISOCHRONOUS) { -+ if (fiq_fsm_mask & (1 << 2)) { -+ /* HS ISOCH support. We test for compatibility: -+ * - DWORD aligned buffers -+ * - Must be at least 2 transfers (otherwise pointless to use the FIQ) -+ * If yes, then the fsm enqueue function will handle the state machine setup. -+ */ -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ struct dwc_otg_hcd_iso_packet_desc (*iso_descs)[0] = &urb->iso_descs; -+ int nr_iso_frames = urb->packet_count; -+ int i; -+ uint32_t ptr; -+ -+ if (nr_iso_frames < 2) -+ return 0; -+ for (i = 0; i < nr_iso_frames; i++) { -+ ptr = urb->dma + iso_descs[i]->offset; -+ if (ptr & 0x3) { -+ printk_ratelimited("%s: Non-Dword aligned isochronous frame offset." -+ " Cannot queue FIQ-accelerated transfer to device %d endpoint %d\n", -+ __FUNCTION__, qh->channel->dev_addr, qh->channel->ep_num); -+ return 0; -+ } -+ } -+ return 1; -+ } -+ } -+ return 0; -+} -+ -+/** -+ * fiq_fsm_setup_periodic_dma() - Set up DMA bounce buffers -+ * @hcd: Pointer to the dwc_otg_hcd struct -+ * @qh: Pointer to the endpoint's queue head -+ * -+ * Periodic split transactions are transmitted modulo 188 bytes. -+ * This necessitates slicing data up into buckets for isochronous out -+ * and fixing up the DMA address for all IN transfers. -+ * -+ * Returns 1 if the DMA bounce buffers have been used, 0 if the default -+ * HC buffer has been used. -+ */ -+int fiq_fsm_setup_periodic_dma(dwc_otg_hcd_t *hcd, struct fiq_channel_state *st, dwc_otg_qh_t *qh) -+ { -+ int frame_length, i = 0; -+ uint8_t *ptr = NULL; -+ dwc_hc_t *hc = qh->channel; -+ struct fiq_dma_blob *blob; -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ -+ for (i = 0; i < 6; i++) { -+ st->dma_info.slot_len[i] = 255; -+ } -+ st->dma_info.index = 0; -+ i = 0; -+ if (hc->ep_is_in) { -+ /* -+ * Set dma_regs to bounce buffer. FIQ will update the -+ * state depending on transaction progress. -+ */ -+ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; -+ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; -+ /* Calculate the max number of CSPLITS such that the FIQ can time out -+ * a transaction if it fails. -+ */ -+ frame_length = st->hcchar_copy.b.mps; -+ do { -+ i++; -+ frame_length -= 188; -+ } while (frame_length >= 0); -+ st->nrpackets = i; -+ return 1; -+ } else { -+ if (qh->ep_type == UE_ISOCHRONOUS) { -+ -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ frame_length = frame_desc->length; -+ -+ /* Virtual address for bounce buffers */ -+ blob = hcd->fiq_dmab; -+ -+ ptr = qtd->urb->buf + frame_desc->offset; -+ if (frame_length == 0) { -+ /* -+ * for isochronous transactions, we must still transmit a packet -+ * even if the length is zero. -+ */ -+ st->dma_info.slot_len[0] = 0; -+ st->nrpackets = 1; -+ } else { -+ do { -+ if (frame_length <= 188) { -+ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, frame_length); -+ st->dma_info.slot_len[i] = frame_length; -+ ptr += frame_length; -+ } else { -+ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, 188); -+ st->dma_info.slot_len[i] = 188; -+ ptr += 188; -+ } -+ i++; -+ frame_length -= 188; -+ } while (frame_length > 0); -+ st->nrpackets = i; -+ } -+ ptr = qtd->urb->buf + frame_desc->offset; -+ /* Point the HC at the DMA address of the bounce buffers */ -+ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base; -+ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0]; -+ -+ /* fixup xfersize to the actual packet size */ -+ st->hctsiz_copy.b.pid = 0; -+ st->hctsiz_copy.b.xfersize = st->dma_info.slot_len[0]; -+ return 1; -+ } else { -+ /* For interrupt, single OUT packet required, goes in the SSPLIT from hc_buff. */ -+ return 0; -+ } -+ } -+} -+ -+/* -+ * Pushing a periodic request into the queue near the EOF1 point -+ * in a microframe causes erroneous behaviour (frmovrun) interrupt. -+ * Usually, the request goes out on the bus causing a transfer but -+ * the core does not transfer the data to memory. -+ * This guard interval (in number of 60MHz clocks) is required which -+ * must cater for CPU latency between reading the value and enabling -+ * the channel. -+ */ -+#define PERIODIC_FRREM_BACKOFF 1000 -+ -+int fiq_fsm_queue_isoc_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) -+{ -+ dwc_hc_t *hc = qh->channel; -+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ int frame; -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; -+ int xfer_len, nrpackets; -+ hcdma_data_t hcdma; -+ hfnum_data_t hfnum; -+ -+ if (st->fsm != FIQ_PASSTHROUGH) -+ return 0; -+ -+ st->nr_errors = 0; -+ -+ st->hcchar_copy.d32 = 0; -+ st->hcchar_copy.b.mps = hc->max_packet; -+ st->hcchar_copy.b.epdir = hc->ep_is_in; -+ st->hcchar_copy.b.devaddr = hc->dev_addr; -+ st->hcchar_copy.b.epnum = hc->ep_num; -+ st->hcchar_copy.b.eptype = hc->ep_type; -+ -+ st->hcintmsk_copy.b.chhltd = 1; -+ -+ frame = dwc_otg_hcd_get_frame_number(hcd); -+ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; -+ -+ st->hcchar_copy.b.lspddev = 0; -+ /* Enable the channel later as a final register write. */ -+ -+ st->hcsplt_copy.d32 = 0; -+ -+ st->hs_isoc_info.iso_desc = (struct dwc_otg_hcd_iso_packet_desc *) &qtd->urb->iso_descs; -+ st->hs_isoc_info.nrframes = qtd->urb->packet_count; -+ /* grab the next DMA address offset from the array */ -+ st->hcdma_copy.d32 = qtd->urb->dma; -+ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[0].offset; -+ -+ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as -+ * the core needs to be told to send the correct number. Caution: for IN transfers, -+ * this is always set to the maximum size of the endpoint. */ -+ xfer_len = st->hs_isoc_info.iso_desc[0].length; -+ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps; -+ if (nrpackets == 0) -+ nrpackets = 1; -+ st->hcchar_copy.b.multicnt = nrpackets; -+ st->hctsiz_copy.b.pktcnt = nrpackets; -+ -+ /* Initial PID also needs to be set */ -+ if (st->hcchar_copy.b.epdir == 0) { -+ st->hctsiz_copy.b.xfersize = xfer_len; -+ switch (st->hcchar_copy.b.multicnt) { -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_MDATA; -+ break; -+ } -+ -+ } else { -+ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps; -+ switch (st->hcchar_copy.b.multicnt) { -+ case 1: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA0; -+ break; -+ case 2: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA1; -+ break; -+ case 3: -+ st->hctsiz_copy.b.pid = DWC_PID_DATA2; -+ break; -+ } -+ } -+ -+ st->hs_isoc_info.stride = qh->interval; -+ st->uframe_sleeps = 0; -+ -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d ", hc->hc_num); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcchar_copy.d32); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); -+ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); -+ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { -+ /* Prevent queueing near EOF1. Bad things happen if a periodic -+ * split transaction is queued very close to EOF. SOF interrupt handler -+ * will wake this channel at the next interrupt. -+ */ -+ st->fsm = FIQ_HS_ISOC_SLEEPING; -+ st->uframe_sleeps = 1; -+ } else { -+ st->fsm = FIQ_HS_ISOC_TURBO; -+ st->hcchar_copy.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ } -+ mb(); -+ st->hcchar_copy.b.chen = 0; -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ return 0; -+} -+ -+ -+/** -+ * fiq_fsm_queue_split_transaction() - Set up a host channel and FIQ state -+ * @hcd: Pointer to the dwc_otg_hcd struct -+ * @qh: Pointer to the endpoint's queue head -+ * -+ * This overrides the dwc_otg driver's normal method of queueing a transaction. -+ * Called from dwc_otg_hcd_queue_transactions(), this performs specific setup -+ * for the nominated host channel. -+ * -+ * For periodic transfers, it also peeks at the FIQ state to see if an immediate -+ * start is possible. If not, then the FIQ is left to start the transfer. -+ */ -+int fiq_fsm_queue_split_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) -+{ -+ int start_immediate = 1, i; -+ hfnum_data_t hfnum; -+ dwc_hc_t *hc = qh->channel; -+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; -+ /* Program HC registers, setup FIQ_state, examine FIQ if periodic, start transfer (not if uframe 5) */ -+ int hub_addr, port_addr, frame, uframe; -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num]; -+ -+ if (st->fsm != FIQ_PASSTHROUGH) -+ return 0; -+ st->nr_errors = 0; -+ -+ st->hcchar_copy.d32 = 0; -+ st->hcchar_copy.b.mps = hc->max_packet; -+ st->hcchar_copy.b.epdir = hc->ep_is_in; -+ st->hcchar_copy.b.devaddr = hc->dev_addr; -+ st->hcchar_copy.b.epnum = hc->ep_num; -+ st->hcchar_copy.b.eptype = hc->ep_type; -+ if (hc->ep_type & 0x1) { -+ if (hc->ep_is_in) -+ st->hcchar_copy.b.multicnt = 3; -+ else -+ /* Docs say set this to 1, but driver sets to 0! */ -+ st->hcchar_copy.b.multicnt = 0; -+ } else { -+ st->hcchar_copy.b.multicnt = 1; -+ st->hcchar_copy.b.oddfrm = 0; -+ } -+ st->hcchar_copy.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW) ? 1 : 0; -+ /* Enable the channel later as a final register write. */ -+ -+ st->hcsplt_copy.d32 = 0; -+ if(qh->do_split) { -+ hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr); -+ st->hcsplt_copy.b.compsplt = 0; -+ st->hcsplt_copy.b.spltena = 1; -+ // XACTPOS is for isoc-out only but needs initialising anyway. -+ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_ALL; -+ if((qh->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!qh->ep_is_in)) { -+ /* For packetsize 0 < L < 188, ISOC_XACTPOS_ALL. -+ * for longer than this, ISOC_XACTPOS_BEGIN and the FIQ -+ * will update as necessary. -+ */ -+ if (hc->xfer_len > 188) { -+ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_BEGIN; -+ } -+ } -+ st->hcsplt_copy.b.hubaddr = (uint8_t) hub_addr; -+ st->hcsplt_copy.b.prtaddr = (uint8_t) port_addr; -+ st->hub_addr = hub_addr; -+ st->port_addr = port_addr; -+ } -+ -+ st->hctsiz_copy.d32 = 0; -+ st->hctsiz_copy.b.dopng = 0; -+ st->hctsiz_copy.b.pid = hc->data_pid_start; -+ -+ if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { -+ hc->xfer_len = hc->max_packet; -+ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { -+ hc->xfer_len = 188; -+ } -+ st->hctsiz_copy.b.xfersize = hc->xfer_len; -+ -+ st->hctsiz_copy.b.pktcnt = 1; -+ -+ if (hc->ep_type & 0x1) { -+ /* -+ * For potentially multi-packet transfers, must use the DMA bounce buffers. For IN transfers, -+ * the DMA address is the address of the first 188byte slot buffer in the bounce buffer array. -+ * For multi-packet OUT transfers, we need to copy the data into the bounce buffer array so the FIQ can punt -+ * the right address out as necessary. hc->xfer_buff and hc->xfer_len have already been set -+ * in assign_and_init_hc(), but this is for the eventual transaction completion only. The FIQ -+ * must not touch internal driver state. -+ */ -+ if(!fiq_fsm_setup_periodic_dma(hcd, st, qh)) { -+ if (hc->align_buff) { -+ st->hcdma_copy.d32 = hc->align_buff; -+ } else { -+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); -+ } -+ } -+ } else { -+ if (hc->align_buff) { -+ st->hcdma_copy.d32 = hc->align_buff; -+ } else { -+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); -+ } -+ } -+ /* The FIQ depends upon no other interrupts being enabled except channel halt. -+ * Fixup channel interrupt mask. */ -+ st->hcintmsk_copy.d32 = 0; -+ st->hcintmsk_copy.b.chhltd = 1; -+ st->hcintmsk_copy.b.ahberr = 1; -+ -+ /* Hack courtesy of FreeBSD: apparently forcing Interrupt Split transactions -+ * as Control puts the transfer into the non-periodic request queue and the -+ * non-periodic handler in the hub. Makes things lots easier. -+ */ -+ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) { -+ st->hcchar_copy.b.multicnt = 0; -+ st->hcchar_copy.b.oddfrm = 0; -+ st->hcchar_copy.b.eptype = UE_CONTROL; -+ if (hc->align_buff) { -+ st->hcdma_copy.d32 = hc->align_buff; -+ } else { -+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF); -+ } -+ } -+ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32); -+ -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ -+ if (hc->ep_type & 0x1) { -+ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); -+ frame = (hfnum.b.frnum & ~0x7) >> 3; -+ uframe = hfnum.b.frnum & 0x7; -+ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) { -+ /* Prevent queueing near EOF1. Bad things happen if a periodic -+ * split transaction is queued very close to EOF. -+ */ -+ start_immediate = 0; -+ } else if (uframe == 5) { -+ start_immediate = 0; -+ } else if (hc->ep_type == UE_ISOCHRONOUS && !hc->ep_is_in) { -+ start_immediate = 0; -+ } else if (hc->ep_is_in && fiq_fsm_too_late(hcd->fiq_state, hc->hc_num)) { -+ start_immediate = 0; -+ } else { -+ /* Search through all host channels to determine if a transaction -+ * is currently in progress */ -+ for (i = 0; i < hcd->core_if->core_params->host_channels; i++) { -+ if (i == hc->hc_num || hcd->fiq_state->channel[i].fsm == FIQ_PASSTHROUGH) -+ continue; -+ switch (hcd->fiq_state->channel[i].fsm) { -+ /* TT is reserved for channels that are in the middle of a periodic -+ * split transaction. -+ */ -+ case FIQ_PER_SSPLIT_STARTED: -+ case FIQ_PER_CSPLIT_WAIT: -+ case FIQ_PER_CSPLIT_NYET1: -+ case FIQ_PER_CSPLIT_POLL: -+ case FIQ_PER_ISO_OUT_ACTIVE: -+ case FIQ_PER_ISO_OUT_LAST: -+ if (hcd->fiq_state->channel[i].hub_addr == hub_addr && -+ hcd->fiq_state->channel[i].port_addr == port_addr) { -+ start_immediate = 0; -+ } -+ break; -+ default: -+ break; -+ } -+ if (!start_immediate) -+ break; -+ } -+ } -+ } -+ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) -+ start_immediate = 1; -+ -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d %01d", hc->hc_num, start_immediate); -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08d", hfnum.b.frrem); -+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "H:%02dP:%02d", hub_addr, port_addr); -+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32); -+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32); -+ switch (hc->ep_type) { -+ case UE_CONTROL: -+ case UE_BULK: -+ st->fsm = FIQ_NP_SSPLIT_STARTED; -+ break; -+ case UE_ISOCHRONOUS: -+ if (hc->ep_is_in) { -+ if (start_immediate) { -+ st->fsm = FIQ_PER_SSPLIT_STARTED; -+ } else { -+ st->fsm = FIQ_PER_SSPLIT_QUEUED; -+ } -+ } else { -+ if (start_immediate) { -+ /* Single-isoc OUT packets don't require FIQ involvement */ -+ if (st->nrpackets == 1) { -+ st->fsm = FIQ_PER_ISO_OUT_LAST; -+ } else { -+ st->fsm = FIQ_PER_ISO_OUT_ACTIVE; -+ } -+ } else { -+ st->fsm = FIQ_PER_ISO_OUT_PENDING; -+ } -+ } -+ break; -+ case UE_INTERRUPT: -+ if (fiq_fsm_mask & 0x8) { -+ st->fsm = FIQ_NP_SSPLIT_STARTED; -+ } else if (start_immediate) { -+ st->fsm = FIQ_PER_SSPLIT_STARTED; -+ } else { -+ st->fsm = FIQ_PER_SSPLIT_QUEUED; -+ } -+ default: -+ break; -+ } -+ if (start_immediate) { -+ /* Set the oddfrm bit as close as possible to actual queueing */ -+ frame = dwc_otg_hcd_get_frame_number(hcd); -+ st->expected_uframe = (frame + 1) & 0x3FFF; -+ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1; -+ st->hcchar_copy.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32); -+ } -+ mb(); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ return 0; -+} -+ -+ -+/** -+ * This function selects transactions from the HCD transfer schedule and -+ * assigns them to available host channels. It is called from HCD interrupt -+ * handler functions. -+ * -+ * @param hcd The HCD state structure. -+ * -+ * @return The types of new transactions that were assigned to host channels. -+ */ -+dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd) -+{ -+ dwc_list_link_t *qh_ptr; -+ dwc_otg_qh_t *qh; -+ int num_channels; -+ dwc_irqflags_t flags; -+ dwc_spinlock_t *channel_lock = hcd->channel_lock; -+ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; -+ -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_per_scheduled = 0; -+ last_sel_trans_num_nonper_scheduled = 0; -+ last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels; -+#endif /* DEBUG_HOST_CHANNELS */ -+ -+ /* Process entries in the periodic ready list. */ -+ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready); -+ -+ while (qh_ptr != &hcd->periodic_sched_ready && -+ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { -+ -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ -+ if (microframe_schedule) { -+ // Make sure we leave one channel for non periodic transactions. -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ if (hcd->available_host_channels <= 1) { -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ break; -+ } -+ hcd->available_host_channels--; -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_per_scheduled++; -+#endif /* DEBUG_HOST_CHANNELS */ -+ } -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ assign_and_init_hc(hcd, qh); -+ -+ /* -+ * Move the QH from the periodic ready schedule to the -+ * periodic assigned schedule. -+ */ -+ qh_ptr = DWC_LIST_NEXT(qh_ptr); -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, -+ &qh->qh_list_entry); -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ } -+ -+ /* -+ * Process entries in the inactive portion of the non-periodic -+ * schedule. Some free host channels may not be used if they are -+ * reserved for periodic transfers. -+ */ -+ qh_ptr = hcd->non_periodic_sched_inactive.next; -+ num_channels = hcd->core_if->core_params->host_channels; -+ while (qh_ptr != &hcd->non_periodic_sched_inactive && -+ (microframe_schedule || hcd->non_periodic_channels < -+ num_channels - hcd->periodic_channels) && -+ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { -+ -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ /* -+ * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission -+ * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed -+ * cheeky devices that just hold off using NAKs -+ */ -+ if (fiq_enable && nak_holdoff && qh->do_split) { -+ if (qh->nak_frame != 0xffff) { -+ uint16_t next_frame = dwc_frame_num_inc(qh->nak_frame, (qh->ep_type == UE_BULK) ? nak_holdoff : 8); -+ uint16_t frame = dwc_otg_hcd_get_frame_number(hcd); -+ if (dwc_frame_num_le(frame, next_frame)) { -+ if(dwc_frame_num_le(next_frame, hcd->fiq_state->next_sched_frame)) { -+ hcd->fiq_state->next_sched_frame = next_frame; -+ } -+ qh_ptr = DWC_LIST_NEXT(qh_ptr); -+ continue; -+ } else { -+ qh->nak_frame = 0xFFFF; -+ } -+ } -+ } -+ -+ if (microframe_schedule) { -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ if (hcd->available_host_channels < 1) { -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ break; -+ } -+ hcd->available_host_channels--; -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_nonper_scheduled++; -+#endif /* DEBUG_HOST_CHANNELS */ -+ } -+ -+ assign_and_init_hc(hcd, qh); -+ -+ /* -+ * Move the QH from the non-periodic inactive schedule to the -+ * non-periodic active schedule. -+ */ -+ qh_ptr = DWC_LIST_NEXT(qh_ptr); -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active, -+ &qh->qh_list_entry); -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ -+ -+ if (!microframe_schedule) -+ hcd->non_periodic_channels++; -+ } -+ /* we moved a non-periodic QH to the active schedule. If the inactive queue is empty, -+ * stop the FIQ from kicking us. We could potentially still have elements here if we -+ * ran out of host channels. -+ */ -+ if (fiq_enable) { -+ if (DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) { -+ hcd->fiq_state->kick_np_queues = 0; -+ } else { -+ /* For each entry remaining in the NP inactive queue, -+ * if this a NAK'd retransmit then don't set the kick flag. -+ */ -+ if(nak_holdoff) { -+ DWC_LIST_FOREACH(qh_ptr, &hcd->non_periodic_sched_inactive) { -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ if (qh->nak_frame == 0xFFFF) { -+ hcd->fiq_state->kick_np_queues = 1; -+ } -+ } -+ } -+ } -+ } -+ if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) -+ ret_val |= DWC_OTG_TRANSACTION_PERIODIC; -+ -+ if(!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) -+ ret_val |= DWC_OTG_TRANSACTION_NON_PERIODIC; -+ -+ -+#ifdef DEBUG_HOST_CHANNELS -+ last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels; -+#endif /* DEBUG_HOST_CHANNELS */ -+ return ret_val; -+} -+ -+/** -+ * Attempts to queue a single transaction request for a host channel -+ * associated with either a periodic or non-periodic transfer. This function -+ * assumes that there is space available in the appropriate request queue. For -+ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space -+ * is available in the appropriate Tx FIFO. -+ * -+ * @param hcd The HCD state structure. -+ * @param hc Host channel descriptor associated with either a periodic or -+ * non-periodic transfer. -+ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx -+ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic -+ * transfers. -+ * -+ * @return 1 if a request is queued and more requests may be needed to -+ * complete the transfer, 0 if no more requests are required for this -+ * transfer, -1 if there is insufficient space in the Tx FIFO. -+ */ -+static int queue_transaction(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, uint16_t fifo_dwords_avail) -+{ -+ int retval; -+ -+ if (hcd->core_if->dma_enable) { -+ if (hcd->core_if->dma_desc_enable) { -+ if (!hc->xfer_started -+ || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) { -+ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh); -+ hc->qh->ping_state = 0; -+ } -+ } else if (!hc->xfer_started) { -+ if (fiq_fsm_enable && hc->error_state) { -+ hcd->fiq_state->channel[hc->hc_num].nr_errors = -+ DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list)->error_count; -+ hcd->fiq_state->channel[hc->hc_num].fsm = -+ FIQ_PASSTHROUGH_ERRORSTATE; -+ } -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ hc->qh->ping_state = 0; -+ } -+ retval = 0; -+ } else if (hc->halt_pending) { -+ /* Don't queue a request if the channel has been halted. */ -+ retval = 0; -+ } else if (hc->halt_on_queue) { -+ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); -+ retval = 0; -+ } else if (hc->do_ping) { -+ if (!hc->xfer_started) { -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ } -+ retval = 0; -+ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { -+ if ((fifo_dwords_avail * 4) >= hc->max_packet) { -+ if (!hc->xfer_started) { -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ retval = 1; -+ } else { -+ retval = -+ dwc_otg_hc_continue_transfer(hcd->core_if, -+ hc); -+ } -+ } else { -+ retval = -1; -+ } -+ } else { -+ if (!hc->xfer_started) { -+ dwc_otg_hc_start_transfer(hcd->core_if, hc); -+ retval = 1; -+ } else { -+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); -+ } -+ } -+ -+ return retval; -+} -+ -+/** -+ * Processes periodic channels for the next frame and queues transactions for -+ * these channels to the DWC_otg controller. After queueing transactions, the -+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions -+ * to queue as Periodic Tx FIFO or request queue space becomes available. -+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. -+ */ -+static void process_periodic_channels(dwc_otg_hcd_t * hcd) -+{ -+ hptxsts_data_t tx_status; -+ dwc_list_link_t *qh_ptr; -+ dwc_otg_qh_t *qh; -+ int status = 0; -+ int no_queue_space = 0; -+ int no_fifo_space = 0; -+ -+ dwc_otg_host_global_regs_t *host_regs; -+ host_regs = hcd->core_if->host_if->host_global_regs; -+ -+ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " P Tx Req Queue Space Avail (before queue): %d\n", -+ tx_status.b.ptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", -+ tx_status.b.ptxfspcavail); -+#endif -+ -+ qh_ptr = hcd->periodic_sched_assigned.next; -+ while (qh_ptr != &hcd->periodic_sched_assigned) { -+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); -+ if (tx_status.b.ptxqspcavail == 0) { -+ no_queue_space = 1; -+ break; -+ } -+ -+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry); -+ -+ // Do not send a split start transaction any later than frame .6 -+ // Note, we have to schedule a periodic in .5 to make it go in .6 -+ if(fiq_fsm_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6) -+ { -+ qh_ptr = qh_ptr->next; -+ hcd->fiq_state->next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7; -+ continue; -+ } -+ -+ if (fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { -+ if (qh->do_split) -+ fiq_fsm_queue_split_transaction(hcd, qh); -+ else -+ fiq_fsm_queue_isoc_transaction(hcd, qh); -+ } else { -+ -+ /* -+ * Set a flag if we're queueing high-bandwidth in slave mode. -+ * The flag prevents any halts to get into the request queue in -+ * the middle of multiple high-bandwidth packets getting queued. -+ */ -+ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) { -+ hcd->core_if->queuing_high_bandwidth = 1; -+ } -+ status = queue_transaction(hcd, qh->channel, -+ tx_status.b.ptxfspcavail); -+ if (status < 0) { -+ no_fifo_space = 1; -+ break; -+ } -+ } -+ -+ /* -+ * In Slave mode, stay on the current transfer until there is -+ * nothing more to do or the high-bandwidth request count is -+ * reached. In DMA mode, only need to queue one request. The -+ * controller automatically handles multiple packets for -+ * high-bandwidth transfers. -+ */ -+ if (hcd->core_if->dma_enable || status == 0 || -+ qh->channel->requests == qh->channel->multi_count) { -+ qh_ptr = qh_ptr->next; -+ /* -+ * Move the QH from the periodic assigned schedule to -+ * the periodic queued schedule. -+ */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued, -+ &qh->qh_list_entry); -+ -+ /* done queuing high bandwidth */ -+ hcd->core_if->queuing_high_bandwidth = 0; -+ } -+ } -+ -+ if (!hcd->core_if->dma_enable) { -+ dwc_otg_core_global_regs_t *global_regs; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ global_regs = hcd->core_if->core_global_regs; -+ intr_mask.b.ptxfempty = 1; -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " P Tx Req Queue Space Avail (after queue): %d\n", -+ tx_status.b.ptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, -+ " P Tx FIFO Space Avail (after queue): %d\n", -+ tx_status.b.ptxfspcavail); -+#endif -+ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) || -+ no_queue_space || no_fifo_space) { -+ /* -+ * May need to queue more transactions as the request -+ * queue or Tx FIFO empties. Enable the periodic Tx -+ * FIFO empty interrupt. (Always use the half-empty -+ * level to ensure that new requests are loaded as -+ * soon as possible.) -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, -+ intr_mask.d32); -+ } else { -+ /* -+ * Disable the Tx FIFO empty interrupt since there are -+ * no more transactions that need to be queued right -+ * now. This function is called from interrupt -+ * handlers to queue more transactions as transfer -+ * states change. -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, -+ 0); -+ } -+ } -+} -+ -+/** -+ * Processes active non-periodic channels and queues transactions for these -+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx -+ * FIFO Empty interrupt is enabled if there are more transactions to queue as -+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx -+ * FIFO Empty interrupt is disabled. -+ */ -+static void process_non_periodic_channels(dwc_otg_hcd_t * hcd) -+{ -+ gnptxsts_data_t tx_status; -+ dwc_list_link_t *orig_qh_ptr; -+ dwc_otg_qh_t *qh; -+ int status; -+ int no_queue_space = 0; -+ int no_fifo_space = 0; -+ int more_to_do = 0; -+ -+ dwc_otg_core_global_regs_t *global_regs = -+ hcd->core_if->core_global_regs; -+ -+ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " NP Tx Req Queue Space Avail (before queue): %d\n", -+ tx_status.b.nptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", -+ tx_status.b.nptxfspcavail); -+#endif -+ /* -+ * Keep track of the starting point. Skip over the start-of-list -+ * entry. -+ */ -+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { -+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; -+ } -+ orig_qh_ptr = hcd->non_periodic_qh_ptr; -+ -+ /* -+ * Process once through the active list or until no more space is -+ * available in the request queue or the Tx FIFO. -+ */ -+ do { -+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { -+ no_queue_space = 1; -+ break; -+ } -+ -+ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, -+ qh_list_entry); -+ -+ if(fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) { -+ fiq_fsm_queue_split_transaction(hcd, qh); -+ } else { -+ status = queue_transaction(hcd, qh->channel, -+ tx_status.b.nptxfspcavail); -+ -+ if (status > 0) { -+ more_to_do = 1; -+ } else if (status < 0) { -+ no_fifo_space = 1; -+ break; -+ } -+ } -+ /* Advance to next QH, skipping start-of-list entry. */ -+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; -+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { -+ hcd->non_periodic_qh_ptr = -+ hcd->non_periodic_qh_ptr->next; -+ } -+ -+ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); -+ -+ if (!hcd->core_if->dma_enable) { -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ intr_mask.b.nptxfempty = 1; -+ -+#ifdef DEBUG -+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_HCDV, -+ " NP Tx Req Queue Space Avail (after queue): %d\n", -+ tx_status.b.nptxqspcavail); -+ DWC_DEBUGPL(DBG_HCDV, -+ " NP Tx FIFO Space Avail (after queue): %d\n", -+ tx_status.b.nptxfspcavail); -+#endif -+ if (more_to_do || no_queue_space || no_fifo_space) { -+ /* -+ * May need to queue more transactions as the request -+ * queue or Tx FIFO empties. Enable the non-periodic -+ * Tx FIFO empty interrupt. (Always use the half-empty -+ * level to ensure that new requests are loaded as -+ * soon as possible.) -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, -+ intr_mask.d32); -+ } else { -+ /* -+ * Disable the Tx FIFO empty interrupt since there are -+ * no more transactions that need to be queued right -+ * now. This function is called from interrupt -+ * handlers to queue more transactions as transfer -+ * states change. -+ */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, -+ 0); -+ } -+ } -+} -+ -+/** -+ * This function processes the currently active host channels and queues -+ * transactions for these channels to the DWC_otg controller. It is called -+ * from HCD interrupt handler functions. -+ * -+ * @param hcd The HCD state structure. -+ * @param tr_type The type(s) of transactions to queue (non-periodic, -+ * periodic, or both). -+ */ -+void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, -+ dwc_otg_transaction_type_e tr_type) -+{ -+#ifdef DEBUG_SOF -+ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); -+#endif -+ /* Process host channels associated with periodic transfers. */ -+ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || -+ tr_type == DWC_OTG_TRANSACTION_ALL) && -+ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) { -+ -+ process_periodic_channels(hcd); -+ } -+ -+ /* Process host channels associated with non-periodic transfers. */ -+ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || -+ tr_type == DWC_OTG_TRANSACTION_ALL) { -+ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) { -+ process_non_periodic_channels(hcd); -+ } else { -+ /* -+ * Ensure NP Tx FIFO empty interrupt is disabled when -+ * there are no non-periodic transfers to process. -+ */ -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ gintmsk.b.nptxfempty = 1; -+ -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ } -+ } -+ } -+} -+ -+#ifdef DWC_HS_ELECT_TST -+/* -+ * Quick and dirty hack to implement the HS Electrical Test -+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. -+ * -+ * This code was copied from our userspace app "hset". It sends a -+ * Get Device Descriptor control sequence in two parts, first the -+ * Setup packet by itself, followed some time later by the In and -+ * Ack packets. Rather than trying to figure out how to add this -+ * functionality to the normal driver code, we just hijack the -+ * hardware, using these two function to drive the hardware -+ * directly. -+ */ -+ -+static dwc_otg_core_global_regs_t *global_regs; -+static dwc_otg_host_global_regs_t *hc_global_regs; -+static dwc_otg_hc_regs_t *hc_regs; -+static uint32_t *data_fifo; -+ -+static void do_setup(void) -+{ -+ gintsts_data_t gintsts; -+ hctsiz_data_t hctsiz; -+ hcchar_data_t hcchar; -+ haint_data_t haint; -+ hcint_data_t hcint; -+ -+ /* Enable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); -+ -+ /* Enable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* -+ * Send Setup packet (Get Device Descriptor) -+ */ -+ -+ /* Make sure channel is disabled */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chdis = 1; -+// hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ //sleep(1); -+ dwc_mdelay(1000); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ } -+ -+ /* Set HCTSIZ */ -+ hctsiz.d32 = 0; -+ hctsiz.b.xfersize = 8; -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ /* Set HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.epdir = 0; -+ hcchar.b.epnum = 0; -+ hcchar.b.mps = 8; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ /* Fill FIFO with Setup data for Get Device Descriptor */ -+ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); -+ DWC_WRITE_REG32(data_fifo++, 0x01000680); -+ DWC_WRITE_REG32(data_fifo++, 0x00080000); -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for host channel interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.hcintr == 0); -+ -+ /* Disable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); -+ -+ /* Disable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+} -+ -+static void do_in_ack(void) -+{ -+ gintsts_data_t gintsts; -+ hctsiz_data_t hctsiz; -+ hcchar_data_t hcchar; -+ haint_data_t haint; -+ hcint_data_t hcint; -+ host_grxsts_data_t grxsts; -+ -+ /* Enable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001); -+ -+ /* Enable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* -+ * Receive Control In packet -+ */ -+ -+ /* Make sure channel is disabled */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chdis = 1; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ //sleep(1); -+ dwc_mdelay(1000); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ } -+ -+ /* Set HCTSIZ */ -+ hctsiz.d32 = 0; -+ hctsiz.b.xfersize = 8; -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ /* Set HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.epdir = 1; -+ hcchar.b.epnum = 0; -+ hcchar.b.mps = 8; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for receive status queue interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.rxstsqlvl == 0); -+ -+ /* Read RXSTS */ -+ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); -+ -+ /* Clear RXSTSQLVL in GINTSTS */ -+ gintsts.d32 = 0; -+ gintsts.b.rxstsqlvl = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ switch (grxsts.b.pktsts) { -+ case DWC_GRXSTS_PKTSTS_IN: -+ /* Read the data into the host buffer */ -+ if (grxsts.b.bcnt > 0) { -+ int i; -+ int word_count = (grxsts.b.bcnt + 3) / 4; -+ -+ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000); -+ -+ for (i = 0; i < word_count; i++) { -+ (void)DWC_READ_REG32(data_fifo++); -+ } -+ } -+ break; -+ -+ default: -+ break; -+ } -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for receive status queue interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.rxstsqlvl == 0); -+ -+ /* Read RXSTS */ -+ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp); -+ -+ /* Clear RXSTSQLVL in GINTSTS */ -+ gintsts.d32 = 0; -+ gintsts.b.rxstsqlvl = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ switch (grxsts.b.pktsts) { -+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: -+ break; -+ -+ default: -+ break; -+ } -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for host channel interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.hcintr == 0); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+// usleep(100000); -+// mdelay(100); -+ dwc_mdelay(1); -+ -+ /* -+ * Send handshake packet -+ */ -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Make sure channel is disabled */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chen) { -+ hcchar.b.chdis = 1; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ //sleep(1); -+ dwc_mdelay(1000); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ } -+ -+ /* Set HCTSIZ */ -+ hctsiz.d32 = 0; -+ hctsiz.b.xfersize = 0; -+ hctsiz.b.pktcnt = 1; -+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; -+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32); -+ -+ /* Set HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.epdir = 0; -+ hcchar.b.epnum = 0; -+ hcchar.b.mps = 8; -+ hcchar.b.chen = 1; -+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32); -+ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ -+ /* Wait for host channel interrupt */ -+ do { -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+ } while (gintsts.b.hcintr == 0); -+ -+ /* Disable HCINTs */ -+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000); -+ -+ /* Disable HAINTs */ -+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000); -+ -+ /* Read HAINT */ -+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint); -+ -+ /* Read HCINT */ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ -+ /* Read HCCHAR */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ -+ /* Clear HCINT */ -+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32); -+ -+ /* Clear HAINT */ -+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32); -+ -+ /* Clear GINTSTS */ -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ /* Read GINTSTS */ -+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts); -+} -+#endif -+ -+/** Handles hub class-specific requests. */ -+int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, -+ uint16_t typeReq, -+ uint16_t wValue, -+ uint16_t wIndex, uint8_t * buf, uint16_t wLength) -+{ -+ int retval = 0; -+ -+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; -+ usb_hub_descriptor_t *hub_desc; -+ hprt0_data_t hprt0 = {.d32 = 0 }; -+ -+ uint32_t port_status; -+ -+ switch (typeReq) { -+ case UCR_CLEAR_HUB_FEATURE: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearHubFeature 0x%x\n", wValue); -+ switch (wValue) { -+ case UHF_C_HUB_LOCAL_POWER: -+ case UHF_C_HUB_OVER_CURRENT: -+ /* Nothing required here */ -+ break; -+ default: -+ retval = -DWC_E_INVALID; -+ DWC_ERROR("DWC OTG HCD - " -+ "ClearHubFeature request %xh unknown\n", -+ wValue); -+ } -+ break; -+ case UCR_CLEAR_PORT_FEATURE: -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (wValue != UHF_PORT_L1) -+#endif -+ if (!wIndex || wIndex > 1) -+ goto error; -+ -+ switch (wValue) { -+ case UHF_PORT_ENABLE: -+ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtena = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ break; -+ case UHF_PORT_SUSPEND: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); -+ -+ if (core_if->power_down == 2) { -+ dwc_otg_host_hibernation_restore(core_if, 0, 0); -+ } else { -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ dwc_mdelay(5); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtres = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ hprt0.b.prtsusp = 0; -+ /* Clear Resume bit */ -+ dwc_mdelay(100); -+ hprt0.b.prtres = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ } -+ break; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ case UHF_PORT_L1: -+ { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ glpmcfg_data_t lpmcfg = {.d32 = 0 }; -+ -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if-> -+ core_global_regs->glpmcfg); -+ lpmcfg.b.en_utmi_sleep = 0; -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ lpmcfg.b.prt_sleep_sts = 1; -+ DWC_WRITE_REG32(&core_if-> -+ core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ -+ /* Clear Enbl_L1Gating bit. */ -+ pcgcctl.b.enbl_sleep_gating = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, -+ 0); -+ -+ dwc_mdelay(5); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtres = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+ /* This bit will be cleared in wakeup interrupt handle */ -+ break; -+ } -+#endif -+ case UHF_PORT_POWER: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_POWER\n"); -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ break; -+ case UHF_PORT_INDICATOR: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); -+ /* Port inidicator not supported */ -+ break; -+ case UHF_C_PORT_CONNECTION: -+ /* Clears drivers internal connect status change -+ * flag */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); -+ dwc_otg_hcd->flags.b.port_connect_status_change = 0; -+ break; -+ case UHF_C_PORT_RESET: -+ /* Clears the driver's internal Port Reset Change -+ * flag */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); -+ dwc_otg_hcd->flags.b.port_reset_change = 0; -+ break; -+ case UHF_C_PORT_ENABLE: -+ /* Clears the driver's internal Port -+ * Enable/Disable Change flag */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); -+ dwc_otg_hcd->flags.b.port_enable_change = 0; -+ break; -+ case UHF_C_PORT_SUSPEND: -+ /* Clears the driver's internal Port Suspend -+ * Change flag, which is set when resume signaling on -+ * the host port is complete */ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); -+ dwc_otg_hcd->flags.b.port_suspend_change = 0; -+ break; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ case UHF_C_PORT_L1: -+ dwc_otg_hcd->flags.b.port_l1_change = 0; -+ break; -+#endif -+ case UHF_C_PORT_OVER_CURRENT: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); -+ dwc_otg_hcd->flags.b.port_over_current_change = 0; -+ break; -+ default: -+ retval = -DWC_E_INVALID; -+ DWC_ERROR("DWC OTG HCD - " -+ "ClearPortFeature request %xh " -+ "unknown or unsupported\n", wValue); -+ } -+ break; -+ case UCR_GET_HUB_DESCRIPTOR: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "GetHubDescriptor\n"); -+ hub_desc = (usb_hub_descriptor_t *) buf; -+ hub_desc->bDescLength = 9; -+ hub_desc->bDescriptorType = 0x29; -+ hub_desc->bNbrPorts = 1; -+ USETW(hub_desc->wHubCharacteristics, 0x08); -+ hub_desc->bPwrOn2PwrGood = 1; -+ hub_desc->bHubContrCurrent = 0; -+ hub_desc->DeviceRemovable[0] = 0; -+ hub_desc->DeviceRemovable[1] = 0xff; -+ break; -+ case UCR_GET_HUB_STATUS: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "GetHubStatus\n"); -+ DWC_MEMSET(buf, 0, 4); -+ break; -+ case UCR_GET_PORT_STATUS: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n", -+ wIndex, dwc_otg_hcd->flags.d32); -+ if (!wIndex || wIndex > 1) -+ goto error; -+ -+ port_status = 0; -+ -+ if (dwc_otg_hcd->flags.b.port_connect_status_change) -+ port_status |= (1 << UHF_C_PORT_CONNECTION); -+ -+ if (dwc_otg_hcd->flags.b.port_enable_change) -+ port_status |= (1 << UHF_C_PORT_ENABLE); -+ -+ if (dwc_otg_hcd->flags.b.port_suspend_change) -+ port_status |= (1 << UHF_C_PORT_SUSPEND); -+ -+ if (dwc_otg_hcd->flags.b.port_l1_change) -+ port_status |= (1 << UHF_C_PORT_L1); -+ -+ if (dwc_otg_hcd->flags.b.port_reset_change) { -+ port_status |= (1 << UHF_C_PORT_RESET); -+ } -+ -+ if (dwc_otg_hcd->flags.b.port_over_current_change) { -+ DWC_WARN("Overcurrent change detected\n"); -+ port_status |= (1 << UHF_C_PORT_OVER_CURRENT); -+ } -+ -+ if (!dwc_otg_hcd->flags.b.port_connect_status) { -+ /* -+ * The port is disconnected, which means the core is -+ * either in device mode or it soon will be. Just -+ * return 0's for the remainder of the port status -+ * since the port register can't be read if the core -+ * is in device mode. -+ */ -+ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); -+ break; -+ } -+ -+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0); -+ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); -+ -+ if (hprt0.b.prtconnsts) -+ port_status |= (1 << UHF_PORT_CONNECTION); -+ -+ if (hprt0.b.prtena) -+ port_status |= (1 << UHF_PORT_ENABLE); -+ -+ if (hprt0.b.prtsusp) -+ port_status |= (1 << UHF_PORT_SUSPEND); -+ -+ if (hprt0.b.prtovrcurract) -+ port_status |= (1 << UHF_PORT_OVER_CURRENT); -+ -+ if (hprt0.b.prtrst) -+ port_status |= (1 << UHF_PORT_RESET); -+ -+ if (hprt0.b.prtpwr) -+ port_status |= (1 << UHF_PORT_POWER); -+ -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) -+ port_status |= (1 << UHF_PORT_HIGH_SPEED); -+ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) -+ port_status |= (1 << UHF_PORT_LOW_SPEED); -+ -+ if (hprt0.b.prttstctl) -+ port_status |= (1 << UHF_PORT_TEST); -+ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) { -+ port_status |= (1 << UHF_PORT_L1); -+ } -+ /* -+ For Synopsys HW emulation of Power down wkup_control asserts the -+ hreset_n and prst_n on suspned. This causes the HPRT0 to be zero. -+ We intentionally tell the software that port is in L2Suspend state. -+ Only for STE. -+ */ -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ port_status |= (1 << UHF_PORT_SUSPEND); -+ } -+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ -+ -+ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status); -+ -+ break; -+ case UCR_SET_HUB_FEATURE: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetHubFeature\n"); -+ /* No HUB features supported */ -+ break; -+ case UCR_SET_PORT_FEATURE: -+ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1)) -+ goto error; -+ -+ if (!dwc_otg_hcd->flags.b.port_connect_status) { -+ /* -+ * The port is disconnected, which means the core is -+ * either in device mode or it soon will be. Just -+ * return without doing anything since the port -+ * register can't be written if the core is in device -+ * mode. -+ */ -+ break; -+ } -+ -+ switch (wValue) { -+ case UHF_PORT_SUSPEND: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); -+ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) { -+ goto error; -+ } -+ if (core_if->power_down == 2) { -+ int timeout = 300; -+ dwc_irqflags_t flags; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ gusbcfg_data_t gusbcfg = {.d32 = 0 }; -+#ifdef DWC_DEV_SRPCAP -+ int32_t otg_cap_param = core_if->core_params->otg_cap; -+#endif -+ DWC_PRINTF("Preparing for complete power-off\n"); -+ -+ /* Save registers before hibernation */ -+ dwc_otg_save_global_regs(core_if); -+ dwc_otg_save_host_regs(core_if); -+ -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 1; -+ hprt0.b.prtena = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ /* Spin hprt0.b.prtsusp to became 1 */ -+ do { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ if (hprt0.b.prtsusp) { -+ break; -+ } -+ dwc_mdelay(1); -+ } while (--timeout); -+ if (!timeout) { -+ DWC_WARN("Suspend wasn't genereted\n"); -+ } -+ dwc_udelay(10); -+ -+ /* -+ * We need to disable interrupts to prevent servicing of any IRQ -+ * during going to hibernation -+ */ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ core_if->lx_state = DWC_OTG_L2; -+#ifdef DWC_DEV_SRPCAP -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 0; -+ hprt0.b.prtena = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+#endif -+ gusbcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs-> -+ gusbcfg); -+ if (gusbcfg.b.ulpi_utmi_sel == 1) { -+ /* ULPI interface */ -+ /* Suspend the Phy Clock */ -+ pcgcctl.d32 = 0; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ } else { -+ /* UTMI+ Interface */ -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32); -+ dwc_udelay(10); -+ } -+#ifdef DWC_DEV_SRPCAP -+ gpwrdn.d32 = 0; -+ gpwrdn.b.dis_vbus = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+#endif -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ gpwrdn.d32 = 0; -+#ifdef DWC_DEV_SRPCAP -+ gpwrdn.b.srp_det_msk = 1; -+#endif -+ gpwrdn.b.disconn_det_msk = 1; -+ gpwrdn.b.lnstchng_msk = 1; -+ gpwrdn.b.sts_chngint_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Enable Power Down Clamp and all interrupts in GPWRDN */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnclmp = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ dwc_udelay(10); -+ -+ /* Switch off VDD */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+#ifdef DWC_DEV_SRPCAP -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) -+ { -+ core_if->pwron_timer_started = 1; -+ DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ ); -+ } -+#endif -+ /* Save gpwrdn register for further usage if stschng interrupt */ -+ core_if->gr_backup->gpwrdn_local = -+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn); -+ -+ /* Set flag to indicate that we are in hibernation */ -+ core_if->hibernation_suspend = 1; -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags); -+ -+ DWC_PRINTF("Host hibernation completed\n"); -+ // Exit from case statement -+ break; -+ -+ } -+ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex && -+ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gotgctl.b.hstsethnpen = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gotgctl, 0, gotgctl.d32); -+ core_if->op_state = A_SUSPEND; -+ } -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ { -+ dwc_irqflags_t flags; -+ /* Update lx_state */ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ core_if->lx_state = DWC_OTG_L2; -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+ } -+ /* Suspend the Phy Clock */ -+ { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, -+ pcgcctl.d32); -+ dwc_udelay(10); -+ } -+ -+ /* For HNP the bus must be suspended for at least 200ms. */ -+ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ dwc_mdelay(200); -+ } -+ -+ /** @todo - check how sw can wait for 1 sec to check asesvld??? */ -+#if 0 //vahrama !!!!!!!!!!!!!!!!!! -+ if (core_if->adp_enable) { -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ gpwrdn_data_t gpwrdn; -+ -+ while (gotgctl.b.asesvld == 1) { -+ gotgctl.d32 = -+ DWC_READ_REG32(&core_if-> -+ core_global_regs-> -+ gotgctl); -+ dwc_mdelay(100); -+ } -+ -+ /* Enable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ /* Unmask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs-> -+ gpwrdn, 0, gpwrdn.d32); -+ -+ dwc_otg_adp_probe_start(core_if); -+ } -+#endif -+ break; -+ case UHF_PORT_POWER: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_POWER\n"); -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtpwr = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ break; -+ case UHF_PORT_RESET: -+ if ((core_if->power_down == 2) -+ && (core_if->hibernation_suspend == 1)) { -+ /* If we are going to exit from Hibernated -+ * state via USB RESET. -+ */ -+ dwc_otg_host_hibernation_restore(core_if, 0, 1); -+ } else { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ -+ DWC_DEBUGPL(DBG_HCD, -+ "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_RESET\n"); -+ { -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ pcgcctl.b.enbl_sleep_gating = 1; -+ pcgcctl.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0); -+ DWC_WRITE_REG32(core_if->pcgcctl, 0); -+ } -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ { -+ glpmcfg_data_t lpmcfg; -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.prt_sleep_sts) { -+ lpmcfg.b.en_utmi_sleep = 0; -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ DWC_WRITE_REG32 -+ (&core_if->core_global_regs->glpmcfg, -+ lpmcfg.d32); -+ dwc_mdelay(1); -+ } -+ } -+#endif -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ /* Clear suspend bit if resetting from suspended state. */ -+ hprt0.b.prtsusp = 0; -+ /* When B-Host the Port reset bit is set in -+ * the Start HCD Callback function, so that -+ * the reset is started within 1ms of the HNP -+ * success interrupt. */ -+ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) { -+ hprt0.b.prtpwr = 1; -+ hprt0.b.prtrst = 1; -+ DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32); -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+ } -+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ -+ dwc_mdelay(60); -+ hprt0.b.prtrst = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */ -+ } -+ break; -+#ifdef DWC_HS_ELECT_TST -+ case UHF_PORT_TEST: -+ { -+ uint32_t t; -+ gintmsk_data_t gintmsk; -+ -+ t = (wIndex >> 8); /* MSB wIndex USB */ -+ DWC_DEBUGPL(DBG_HCD, -+ "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", -+ t); -+ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t); -+ if (t < 6) { -+ hprt0.d32 = dwc_otg_read_hprt0(core_if); -+ hprt0.b.prttstctl = t; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, -+ hprt0.d32); -+ } else { -+ /* Setup global vars with reg addresses (quick and -+ * dirty hack, should be cleaned up) -+ */ -+ global_regs = core_if->core_global_regs; -+ hc_global_regs = -+ core_if->host_if->host_global_regs; -+ hc_regs = -+ (dwc_otg_hc_regs_t *) ((char *) -+ global_regs + -+ 0x500); -+ data_fifo = -+ (uint32_t *) ((char *)global_regs + -+ 0x1000); -+ -+ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ -+ /* Save current interrupt mask */ -+ gintmsk.d32 = -+ DWC_READ_REG32 -+ (&global_regs->gintmsk); -+ -+ /* Disable all interrupts while we muck with -+ * the hardware directly -+ */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* 15 second delay per the test spec */ -+ dwc_mdelay(15000); -+ -+ /* Drive suspend on the root port */ -+ hprt0.d32 = -+ dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 1; -+ hprt0.b.prtres = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* 15 second delay per the test spec */ -+ dwc_mdelay(15000); -+ -+ /* Drive resume on the root port */ -+ hprt0.d32 = -+ dwc_otg_read_hprt0(core_if); -+ hprt0.b.prtsusp = 0; -+ hprt0.b.prtres = 1; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ dwc_mdelay(100); -+ -+ /* Clear the resume bit */ -+ hprt0.b.prtres = 0; -+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32); -+ -+ /* Restore interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); -+ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ -+ /* Save current interrupt mask */ -+ gintmsk.d32 = -+ DWC_READ_REG32 -+ (&global_regs->gintmsk); -+ -+ /* Disable all interrupts while we muck with -+ * the hardware directly -+ */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* 15 second delay per the test spec */ -+ dwc_mdelay(15000); -+ -+ /* Send the Setup packet */ -+ do_setup(); -+ -+ /* 15 second delay so nothing else happens for awhile */ -+ dwc_mdelay(15000); -+ -+ /* Restore interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); -+ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ -+ /* Save current interrupt mask */ -+ gintmsk.d32 = -+ DWC_READ_REG32 -+ (&global_regs->gintmsk); -+ -+ /* Disable all interrupts while we muck with -+ * the hardware directly -+ */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, 0); -+ -+ /* Send the Setup packet */ -+ do_setup(); -+ -+ /* 15 second delay so nothing else happens for awhile */ -+ dwc_mdelay(15000); -+ -+ /* Send the In and Ack packets */ -+ do_in_ack(); -+ -+ /* 15 second delay so nothing else happens for awhile */ -+ dwc_mdelay(15000); -+ -+ /* Restore interrupts */ -+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32); -+ } -+ } -+ break; -+ } -+#endif /* DWC_HS_ELECT_TST */ -+ -+ case UHF_PORT_INDICATOR: -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " -+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); -+ /* Not supported */ -+ break; -+ default: -+ retval = -DWC_E_INVALID; -+ DWC_ERROR("DWC OTG HCD - " -+ "SetPortFeature request %xh " -+ "unknown or unsupported\n", wValue); -+ break; -+ } -+ break; -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ case UCR_SET_AND_TEST_PORT_FEATURE: -+ if (wValue != UHF_PORT_L1) { -+ goto error; -+ } -+ { -+ int portnum, hird, devaddr, remwake; -+ glpmcfg_data_t lpmcfg; -+ uint32_t time_usecs; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk; -+ -+ if (!dwc_otg_get_param_lpm_enable(core_if)) { -+ goto error; -+ } -+ if (wValue != UHF_PORT_L1 || wLength != 1) { -+ goto error; -+ } -+ /* Check if the port currently is in SLEEP state */ -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.prt_sleep_sts) { -+ DWC_INFO("Port is already in sleep mode\n"); -+ buf[0] = 0; /* Return success */ -+ break; -+ } -+ -+ portnum = wIndex & 0xf; -+ hird = (wIndex >> 4) & 0xf; -+ devaddr = (wIndex >> 8) & 0x7f; -+ remwake = (wIndex >> 15); -+ -+ if (portnum != 1) { -+ retval = -DWC_E_INVALID; -+ DWC_WARN -+ ("Wrong port number(%d) in SetandTestPortFeature request\n", -+ portnum); -+ break; -+ } -+ -+ DWC_PRINTF -+ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n", -+ portnum, hird, devaddr, remwake); -+ /* Disable LPM interrupt */ -+ gintmsk.d32 = 0; -+ gintmsk.b.lpmtranrcvd = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ gintmsk.d32, 0); -+ -+ if (dwc_otg_hcd_send_lpm -+ (dwc_otg_hcd, devaddr, hird, remwake)) { -+ retval = -DWC_E_INVALID; -+ break; -+ } -+ -+ time_usecs = 10 * (lpmcfg.b.retry_count + 1); -+ /* We will consider timeout if time_usecs microseconds pass, -+ * and we don't receive LPM transaction status. -+ * After receiving non-error responce(ACK/NYET/STALL) from device, -+ * core will set lpmtranrcvd bit. -+ */ -+ do { -+ gintsts.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (gintsts.b.lpmtranrcvd) { -+ break; -+ } -+ dwc_udelay(1); -+ } while (--time_usecs); -+ /* lpm_int bit will be cleared in LPM interrupt handler */ -+ -+ /* Now fill status -+ * 0x00 - Success -+ * 0x10 - NYET -+ * 0x11 - Timeout -+ */ -+ if (!gintsts.b.lpmtranrcvd) { -+ buf[0] = 0x3; /* Completion code is Timeout */ -+ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd); -+ } else { -+ lpmcfg.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ if (lpmcfg.b.lpm_resp == 0x3) { -+ /* ACK responce from the device */ -+ buf[0] = 0x00; /* Success */ -+ } else if (lpmcfg.b.lpm_resp == 0x2) { -+ /* NYET responce from the device */ -+ buf[0] = 0x2; -+ } else { -+ /* Otherwise responce with Timeout */ -+ buf[0] = 0x3; -+ } -+ } -+ DWC_PRINTF("Device responce to LPM trans is %x\n", -+ lpmcfg.b.lpm_resp); -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, -+ gintmsk.d32); -+ -+ break; -+ } -+#endif /* CONFIG_USB_DWC_OTG_LPM */ -+ default: -+error: -+ retval = -DWC_E_INVALID; -+ DWC_WARN("DWC OTG HCD - " -+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", -+ typeReq, wIndex, wValue); -+ break; -+ } -+ -+ return retval; -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** Returns index of host channel to perform LPM transaction. */ -+int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr) -+{ -+ dwc_otg_core_if_t *core_if = hcd->core_if; -+ dwc_hc_t *hc; -+ hcchar_data_t hcchar; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) { -+ DWC_PRINTF("No free channel to select for LPM transaction\n"); -+ return -1; -+ } -+ -+ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list); -+ -+ /* Mask host channel interrupts. */ -+ gintmsk.b.hcintr = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); -+ -+ /* Fill fields that core needs for LPM transaction */ -+ hcchar.b.devaddr = devaddr; -+ hcchar.b.epnum = 0; -+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; -+ hcchar.b.mps = 64; -+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); -+ hcchar.b.epdir = 0; /* OUT */ -+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar, -+ hcchar.d32); -+ -+ /* Remove the host channel from the free list. */ -+ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry); -+ -+ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr); -+ -+ return hc->hc_num; -+} -+ -+/** Release hc after performing LPM transaction */ -+void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd) -+{ -+ dwc_hc_t *hc; -+ glpmcfg_data_t lpmcfg; -+ uint8_t hc_num; -+ -+ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); -+ hc_num = lpmcfg.b.lpm_chan_index; -+ -+ hc = hcd->hc_ptr_array[hc_num]; -+ -+ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num); -+ /* Return host channel to free list */ -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); -+} -+ -+int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird, -+ uint8_t bRemoteWake) -+{ -+ glpmcfg_data_t lpmcfg; -+ pcgcctl_data_t pcgcctl = {.d32 = 0 }; -+ int channel; -+ -+ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr); -+ if (channel < 0) { -+ return channel; -+ } -+ -+ pcgcctl.b.enbl_sleep_gating = 1; -+ DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32); -+ -+ /* Read LPM config register */ -+ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg); -+ -+ /* Program LPM transaction fields */ -+ lpmcfg.b.rem_wkup_en = bRemoteWake; -+ lpmcfg.b.hird = hird; -+ lpmcfg.b.hird_thres = 0x1c; -+ lpmcfg.b.lpm_chan_index = channel; -+ lpmcfg.b.en_utmi_sleep = 1; -+ /* Program LPM config register */ -+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+ -+ /* Send LPM transaction */ -+ lpmcfg.b.send_lpm = 1; -+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+ -+ return 0; -+} -+ -+#endif /* CONFIG_USB_DWC_OTG_LPM */ -+ -+int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port) -+{ -+ int retval; -+ -+ if (port != 1) { -+ return -DWC_E_INVALID; -+ } -+ -+ retval = (hcd->flags.b.port_connect_status_change || -+ hcd->flags.b.port_reset_change || -+ hcd->flags.b.port_enable_change || -+ hcd->flags.b.port_suspend_change || -+ hcd->flags.b.port_over_current_change); -+#ifdef DEBUG -+ if (retval) { -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" -+ " Root port status changed\n"); -+ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", -+ hcd->flags.b.port_connect_status_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", -+ hcd->flags.b.port_reset_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", -+ hcd->flags.b.port_enable_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", -+ hcd->flags.b.port_suspend_change); -+ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", -+ hcd->flags.b.port_over_current_change); -+ } -+#endif -+ return retval; -+} -+ -+int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ hfnum_data_t hfnum; -+ hfnum.d32 = -+ DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs-> -+ hfnum); -+ -+#ifdef DEBUG_SOF -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", -+ hfnum.b.frnum); -+#endif -+ return hfnum.b.frnum; -+} -+ -+int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, -+ struct dwc_otg_hcd_function_ops *fops) -+{ -+ int retval = 0; -+ -+ hcd->fops = fops; -+ if (!dwc_otg_is_device_mode(hcd->core_if) && -+ (!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) { -+ dwc_otg_hcd_reinit(hcd); -+ } else { -+ retval = -DWC_E_NO_DEVICE; -+ } -+ -+ return retval; -+} -+ -+void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd) -+{ -+ return hcd->priv; -+} -+ -+void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data) -+{ -+ hcd->priv = priv_data; -+} -+ -+uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd) -+{ -+ return hcd->otg_port; -+} -+ -+uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd) -+{ -+ uint32_t is_b_host; -+ if (hcd->core_if->op_state == B_HOST) { -+ is_b_host = 1; -+ } else { -+ is_b_host = 0; -+ } -+ -+ return is_b_host; -+} -+ -+dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, -+ int iso_desc_count, int atomic_alloc) -+{ -+ dwc_otg_hcd_urb_t *dwc_otg_urb; -+ uint32_t size; -+ -+ size = -+ sizeof(*dwc_otg_urb) + -+ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc); -+ if (atomic_alloc) -+ dwc_otg_urb = DWC_ALLOC_ATOMIC(size); -+ else -+ dwc_otg_urb = DWC_ALLOC(size); -+ -+ if (dwc_otg_urb) -+ dwc_otg_urb->packet_count = iso_desc_count; -+ else { -+ DWC_ERROR("**** DWC OTG HCD URB alloc - " -+ "%salloc of %db failed\n", -+ atomic_alloc?"atomic ":"", size); -+ } -+ return dwc_otg_urb; -+} -+ -+void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ uint8_t dev_addr, uint8_t ep_num, -+ uint8_t ep_type, uint8_t ep_dir, uint16_t mps) -+{ -+ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num, -+ ep_type, ep_dir, mps); -+#if 0 -+ DWC_PRINTF -+ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n", -+ dev_addr, ep_num, ep_dir, ep_type, mps); -+#endif -+} -+ -+void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ void *urb_handle, void *buf, dwc_dma_t dma, -+ uint32_t buflen, void *setup_packet, -+ dwc_dma_t setup_dma, uint32_t flags, -+ uint16_t interval) -+{ -+ dwc_otg_urb->priv = urb_handle; -+ dwc_otg_urb->buf = buf; -+ dwc_otg_urb->dma = dma; -+ dwc_otg_urb->length = buflen; -+ dwc_otg_urb->setup_packet = setup_packet; -+ dwc_otg_urb->setup_dma = setup_dma; -+ dwc_otg_urb->flags = flags; -+ dwc_otg_urb->interval = interval; -+ dwc_otg_urb->status = -DWC_E_IN_PROGRESS; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ return dwc_otg_urb->status; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ return dwc_otg_urb->actual_length; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb) -+{ -+ return dwc_otg_urb->error_count; -+} -+ -+void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int desc_num, uint32_t offset, -+ uint32_t length) -+{ -+ dwc_otg_urb->iso_descs[desc_num].offset = offset; -+ dwc_otg_urb->iso_descs[desc_num].length = length; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int desc_num) -+{ -+ return dwc_otg_urb->iso_descs[desc_num].status; -+} -+ -+uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * -+ dwc_otg_urb, int desc_num) -+{ -+ return dwc_otg_urb->iso_descs[desc_num].actual_length; -+} -+ -+int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ int allocated = 0; -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ -+ if (qh) { -+ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ allocated = 1; -+ } -+ } -+ return allocated; -+} -+ -+int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ int freed = 0; -+ DWC_ASSERT(qh, "qh is not allocated\n"); -+ -+ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ freed = 1; -+ } -+ -+ return freed; -+} -+ -+uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle) -+{ -+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle; -+ DWC_ASSERT(qh, "qh is not allocated\n"); -+ return qh->usecs; -+} -+ -+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd) -+{ -+#ifdef DEBUG -+ int num_channels; -+ int i; -+ gnptxsts_data_t np_tx_status; -+ hptxsts_data_t p_tx_status; -+ -+ num_channels = hcd->core_if->core_params->host_channels; -+ DWC_PRINTF("\n"); -+ DWC_PRINTF -+ ("************************************************************\n"); -+ DWC_PRINTF("HCD State:\n"); -+ DWC_PRINTF(" Num channels: %d\n", num_channels); -+ for (i = 0; i < num_channels; i++) { -+ dwc_hc_t *hc = hcd->hc_ptr_array[i]; -+ DWC_PRINTF(" Channel %d:\n", i); -+ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", -+ hc->dev_addr, hc->ep_num, hc->ep_is_in); -+ DWC_PRINTF(" speed: %d\n", hc->speed); -+ DWC_PRINTF(" ep_type: %d\n", hc->ep_type); -+ DWC_PRINTF(" max_packet: %d\n", hc->max_packet); -+ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start); -+ DWC_PRINTF(" multi_count: %d\n", hc->multi_count); -+ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started); -+ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff); -+ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len); -+ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count); -+ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue); -+ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending); -+ DWC_PRINTF(" halt_status: %d\n", hc->halt_status); -+ DWC_PRINTF(" do_split: %d\n", hc->do_split); -+ DWC_PRINTF(" complete_split: %d\n", hc->complete_split); -+ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr); -+ DWC_PRINTF(" port_addr: %d\n", hc->port_addr); -+ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos); -+ DWC_PRINTF(" requests: %d\n", hc->requests); -+ DWC_PRINTF(" qh: %p\n", hc->qh); -+ if (hc->xfer_started) { -+ hfnum_data_t hfnum; -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ hfnum.d32 = -+ DWC_READ_REG32(&hcd->core_if-> -+ host_if->host_global_regs->hfnum); -+ hcchar.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hcchar); -+ hctsiz.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hctsiz); -+ hcint.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hcint); -+ hcintmsk.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if-> -+ hc_regs[i]->hcintmsk); -+ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32); -+ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32); -+ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32); -+ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32); -+ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32); -+ } -+ if (hc->xfer_started && hc->qh) { -+ dwc_otg_qtd_t *qtd; -+ dwc_otg_hcd_urb_t *urb; -+ -+ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) { -+ if (!qtd->in_process) -+ break; -+ -+ urb = qtd->urb; -+ DWC_PRINTF(" URB Info:\n"); -+ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb); -+ if (urb) { -+ DWC_PRINTF(" Dev: %d, EP: %d %s\n", -+ dwc_otg_hcd_get_dev_addr(&urb-> -+ pipe_info), -+ dwc_otg_hcd_get_ep_num(&urb-> -+ pipe_info), -+ dwc_otg_hcd_is_pipe_in(&urb-> -+ pipe_info) ? -+ "IN" : "OUT"); -+ DWC_PRINTF(" Max packet size: %d\n", -+ dwc_otg_hcd_get_mps(&urb-> -+ pipe_info)); -+ DWC_PRINTF(" transfer_buffer: %p\n", -+ urb->buf); -+ DWC_PRINTF(" transfer_dma: %p\n", -+ (void *)urb->dma); -+ DWC_PRINTF(" transfer_buffer_length: %d\n", -+ urb->length); -+ DWC_PRINTF(" actual_length: %d\n", -+ urb->actual_length); -+ } -+ } -+ } -+ } -+ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels); -+ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels); -+ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs); -+ np_tx_status.d32 = -+ DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts); -+ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n", -+ np_tx_status.b.nptxqspcavail); -+ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n", -+ np_tx_status.b.nptxfspcavail); -+ p_tx_status.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts); -+ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n", -+ p_tx_status.b.ptxqspcavail); -+ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); -+ dwc_otg_hcd_dump_frrem(hcd); -+ dwc_otg_dump_global_registers(hcd->core_if); -+ dwc_otg_dump_host_registers(hcd->core_if); -+ DWC_PRINTF -+ ("************************************************************\n"); -+ DWC_PRINTF("\n"); -+#endif -+} -+ -+#ifdef DEBUG -+void dwc_print_setup_data(uint8_t * setup) -+{ -+ int i; -+ if (CHK_DEBUG_LEVEL(DBG_HCD)) { -+ DWC_PRINTF("Setup Data = MSB "); -+ for (i = 7; i >= 0; i--) -+ DWC_PRINTF("%02x ", setup[i]); -+ DWC_PRINTF("\n"); -+ DWC_PRINTF(" bmRequestType Tranfer = %s\n", -+ (setup[0] & 0x80) ? "Device-to-Host" : -+ "Host-to-Device"); -+ DWC_PRINTF(" bmRequestType Type = "); -+ switch ((setup[0] & 0x60) >> 5) { -+ case 0: -+ DWC_PRINTF("Standard\n"); -+ break; -+ case 1: -+ DWC_PRINTF("Class\n"); -+ break; -+ case 2: -+ DWC_PRINTF("Vendor\n"); -+ break; -+ case 3: -+ DWC_PRINTF("Reserved\n"); -+ break; -+ } -+ DWC_PRINTF(" bmRequestType Recipient = "); -+ switch (setup[0] & 0x1f) { -+ case 0: -+ DWC_PRINTF("Device\n"); -+ break; -+ case 1: -+ DWC_PRINTF("Interface\n"); -+ break; -+ case 2: -+ DWC_PRINTF("Endpoint\n"); -+ break; -+ case 3: -+ DWC_PRINTF("Other\n"); -+ break; -+ default: -+ DWC_PRINTF("Reserved\n"); -+ break; -+ } -+ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]); -+ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2])); -+ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4])); -+ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6])); -+ } -+} -+#endif -+ -+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd) -+{ -+#if 0 -+ DWC_PRINTF("Frame remaining at SOF:\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->frrem_samples, hcd->frrem_accum, -+ (hcd->frrem_samples > 0) ? -+ hcd->frrem_accum / hcd->frrem_samples : 0); -+ -+ DWC_PRINTF("\n"); -+ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->core_if->hfnum_7_samples, -+ hcd->core_if->hfnum_7_frrem_accum, -+ (hcd->core_if->hfnum_7_samples > -+ 0) ? hcd->core_if->hfnum_7_frrem_accum / -+ hcd->core_if->hfnum_7_samples : 0); -+ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->core_if->hfnum_0_samples, -+ hcd->core_if->hfnum_0_frrem_accum, -+ (hcd->core_if->hfnum_0_samples > -+ 0) ? hcd->core_if->hfnum_0_frrem_accum / -+ hcd->core_if->hfnum_0_samples : 0); -+ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->core_if->hfnum_other_samples, -+ hcd->core_if->hfnum_other_frrem_accum, -+ (hcd->core_if->hfnum_other_samples > -+ 0) ? hcd->core_if->hfnum_other_frrem_accum / -+ hcd->core_if->hfnum_other_samples : 0); -+ -+ DWC_PRINTF("\n"); -+ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, -+ (hcd->hfnum_7_samples_a > 0) ? -+ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0); -+ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, -+ (hcd->hfnum_0_samples_a > 0) ? -+ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0); -+ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, -+ (hcd->hfnum_other_samples_a > 0) ? -+ hcd->hfnum_other_frrem_accum_a / -+ hcd->hfnum_other_samples_a : 0); -+ -+ DWC_PRINTF("\n"); -+ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, -+ (hcd->hfnum_7_samples_b > 0) ? -+ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0); -+ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, -+ (hcd->hfnum_0_samples_b > 0) ? -+ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0); -+ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n"); -+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n", -+ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, -+ (hcd->hfnum_other_samples_b > 0) ? -+ hcd->hfnum_other_frrem_accum_b / -+ hcd->hfnum_other_samples_b : 0); -+#endif -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h -@@ -0,0 +1,868 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ -+ * $Revision: #58 $ -+ * $Date: 2011/09/15 $ -+ * $Change: 1846647 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+#ifndef __DWC_HCD_H__ -+#define __DWC_HCD_H__ -+ -+#include "dwc_otg_os_dep.h" -+#include "usb.h" -+#include "dwc_otg_hcd_if.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_list.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_fiq_fsm.h" -+#include "dwc_otg_driver.h" -+ -+ -+/** -+ * @file -+ * -+ * This file contains the structures, constants, and interfaces for -+ * the Host Contoller Driver (HCD). -+ * -+ * The Host Controller Driver (HCD) is responsible for translating requests -+ * from the USB Driver into the appropriate actions on the DWC_otg controller. -+ * It isolates the USBD from the specifics of the controller by providing an -+ * API to the USBD. -+ */ -+ -+struct dwc_otg_hcd_pipe_info { -+ uint8_t dev_addr; -+ uint8_t ep_num; -+ uint8_t pipe_type; -+ uint8_t pipe_dir; -+ uint16_t mps; -+}; -+ -+struct dwc_otg_hcd_iso_packet_desc { -+ uint32_t offset; -+ uint32_t length; -+ uint32_t actual_length; -+ uint32_t status; -+}; -+ -+struct dwc_otg_qtd; -+ -+struct dwc_otg_hcd_urb { -+ void *priv; -+ struct dwc_otg_qtd *qtd; -+ void *buf; -+ dwc_dma_t dma; -+ void *setup_packet; -+ dwc_dma_t setup_dma; -+ uint32_t length; -+ uint32_t actual_length; -+ uint32_t status; -+ uint32_t error_count; -+ uint32_t packet_count; -+ uint32_t flags; -+ uint16_t interval; -+ struct dwc_otg_hcd_pipe_info pipe_info; -+ struct dwc_otg_hcd_iso_packet_desc iso_descs[0]; -+}; -+ -+static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe) -+{ -+ return pipe->ep_num; -+} -+ -+static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return pipe->pipe_type; -+} -+ -+static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe) -+{ -+ return pipe->mps; -+} -+ -+static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return pipe->dev_addr; -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_ISOCHRONOUS); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_INTERRUPT); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_BULK); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (pipe->pipe_type == UE_CONTROL); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe) -+{ -+ return (pipe->pipe_dir == UE_DIR_IN); -+} -+ -+static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info -+ *pipe) -+{ -+ return (!dwc_otg_hcd_is_pipe_in(pipe)); -+} -+ -+static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe, -+ uint8_t devaddr, uint8_t ep_num, -+ uint8_t pipe_type, uint8_t pipe_dir, -+ uint16_t mps) -+{ -+ pipe->dev_addr = devaddr; -+ pipe->ep_num = ep_num; -+ pipe->pipe_type = pipe_type; -+ pipe->pipe_dir = pipe_dir; -+ pipe->mps = mps; -+} -+ -+/** -+ * Phases for control transfers. -+ */ -+typedef enum dwc_otg_control_phase { -+ DWC_OTG_CONTROL_SETUP, -+ DWC_OTG_CONTROL_DATA, -+ DWC_OTG_CONTROL_STATUS -+} dwc_otg_control_phase_e; -+ -+/** Transaction types. */ -+typedef enum dwc_otg_transaction_type { -+ DWC_OTG_TRANSACTION_NONE = 0, -+ DWC_OTG_TRANSACTION_PERIODIC = 1, -+ DWC_OTG_TRANSACTION_NON_PERIODIC = 2, -+ DWC_OTG_TRANSACTION_ALL = DWC_OTG_TRANSACTION_PERIODIC + DWC_OTG_TRANSACTION_NON_PERIODIC -+} dwc_otg_transaction_type_e; -+ -+struct dwc_otg_qh; -+ -+/** -+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, -+ * interrupt, or isochronous transfer. A single QTD is created for each URB -+ * (of one of these types) submitted to the HCD. The transfer associated with -+ * a QTD may require one or multiple transactions. -+ * -+ * A QTD is linked to a Queue Head, which is entered in either the -+ * non-periodic or periodic schedule for execution. When a QTD is chosen for -+ * execution, some or all of its transactions may be executed. After -+ * execution, the state of the QTD is updated. The QTD may be retired if all -+ * its transactions are complete or if an error occurred. Otherwise, it -+ * remains in the schedule so more transactions can be executed later. -+ */ -+typedef struct dwc_otg_qtd { -+ /** -+ * Determines the PID of the next data packet for the data phase of -+ * control transfers. Ignored for other transfer types.<br> -+ * One of the following values: -+ * - DWC_OTG_HC_PID_DATA0 -+ * - DWC_OTG_HC_PID_DATA1 -+ */ -+ uint8_t data_toggle; -+ -+ /** Current phase for control transfers (Setup, Data, or Status). */ -+ dwc_otg_control_phase_e control_phase; -+ -+ /** Keep track of the current split type -+ * for FS/LS endpoints on a HS Hub */ -+ uint8_t complete_split; -+ -+ /** How many bytes transferred during SSPLIT OUT */ -+ uint32_t ssplit_out_xfer_count; -+ -+ /** -+ * Holds the number of bus errors that have occurred for a transaction -+ * within this transfer. -+ */ -+ uint8_t error_count; -+ -+ /** -+ * Index of the next frame descriptor for an isochronous transfer. A -+ * frame descriptor describes the buffer position and length of the -+ * data to be transferred in the next scheduled (micro)frame of an -+ * isochronous transfer. It also holds status for that transaction. -+ * The frame index starts at 0. -+ */ -+ uint16_t isoc_frame_index; -+ -+ /** Position of the ISOC split on full/low speed */ -+ uint8_t isoc_split_pos; -+ -+ /** Position of the ISOC split in the buffer for the current frame */ -+ uint16_t isoc_split_offset; -+ -+ /** URB for this transfer */ -+ struct dwc_otg_hcd_urb *urb; -+ -+ struct dwc_otg_qh *qh; -+ -+ /** This list of QTDs */ -+ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry; -+ -+ /** Indicates if this QTD is currently processed by HW. */ -+ uint8_t in_process; -+ -+ /** Number of DMA descriptors for this QTD */ -+ uint8_t n_desc; -+ -+ /** -+ * Last activated frame(packet) index. -+ * Used in Descriptor DMA mode only. -+ */ -+ uint16_t isoc_frame_index_last; -+ -+} dwc_otg_qtd_t; -+ -+DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd); -+ -+/** -+ * A Queue Head (QH) holds the static characteristics of an endpoint and -+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may -+ * be entered in either the non-periodic or periodic schedule. -+ */ -+typedef struct dwc_otg_qh { -+ /** -+ * Endpoint type. -+ * One of the following values: -+ * - UE_CONTROL -+ * - UE_BULK -+ * - UE_INTERRUPT -+ * - UE_ISOCHRONOUS -+ */ -+ uint8_t ep_type; -+ uint8_t ep_is_in; -+ -+ /** wMaxPacketSize Field of Endpoint Descriptor. */ -+ uint16_t maxp; -+ -+ /** -+ * Device speed. -+ * One of the following values: -+ * - DWC_OTG_EP_SPEED_LOW -+ * - DWC_OTG_EP_SPEED_FULL -+ * - DWC_OTG_EP_SPEED_HIGH -+ */ -+ uint8_t dev_speed; -+ -+ /** -+ * Determines the PID of the next data packet for non-control -+ * transfers. Ignored for control transfers.<br> -+ * One of the following values: -+ * - DWC_OTG_HC_PID_DATA0 -+ * - DWC_OTG_HC_PID_DATA1 -+ */ -+ uint8_t data_toggle; -+ -+ /** Ping state if 1. */ -+ uint8_t ping_state; -+ -+ /** -+ * List of QTDs for this QH. -+ */ -+ struct dwc_otg_qtd_list qtd_list; -+ -+ /** Host channel currently processing transfers for this QH. */ -+ struct dwc_hc *channel; -+ -+ /** Full/low speed endpoint on high-speed hub requires split. */ -+ uint8_t do_split; -+ -+ /** @name Periodic schedule information */ -+ /** @{ */ -+ -+ /** Bandwidth in microseconds per (micro)frame. */ -+ uint16_t usecs; -+ -+ /** Interval between transfers in (micro)frames. */ -+ uint16_t interval; -+ -+ /** -+ * (micro)frame to initialize a periodic transfer. The transfer -+ * executes in the following (micro)frame. -+ */ -+ uint16_t sched_frame; -+ -+ /* -+ ** Frame a NAK was received on this queue head, used to minimise NAK retransmission -+ */ -+ uint16_t nak_frame; -+ -+ /** (micro)frame at which last start split was initialized. */ -+ uint16_t start_split_frame; -+ -+ /** @} */ -+ -+ /** -+ * Used instead of original buffer if -+ * it(physical address) is not dword-aligned. -+ */ -+ uint8_t *dw_align_buf; -+ dwc_dma_t dw_align_buf_dma; -+ -+ /** Entry for QH in either the periodic or non-periodic schedule. */ -+ dwc_list_link_t qh_list_entry; -+ -+ /** @name Descriptor DMA support */ -+ /** @{ */ -+ -+ /** Descriptor List. */ -+ dwc_otg_host_dma_desc_t *desc_list; -+ -+ /** Descriptor List physical address. */ -+ dwc_dma_t desc_list_dma; -+ -+ /** -+ * Xfer Bytes array. -+ * Each element corresponds to a descriptor and indicates -+ * original XferSize size value for the descriptor. -+ */ -+ uint32_t *n_bytes; -+ -+ /** Actual number of transfer descriptors in a list. */ -+ uint16_t ntd; -+ -+ /** First activated isochronous transfer descriptor index. */ -+ uint8_t td_first; -+ /** Last activated isochronous transfer descriptor index. */ -+ uint8_t td_last; -+ -+ /** @} */ -+ -+ -+ uint16_t speed; -+ uint16_t frame_usecs[8]; -+ -+ uint32_t skip_count; -+} dwc_otg_qh_t; -+ -+DWC_CIRCLEQ_HEAD(hc_list, dwc_hc); -+ -+typedef struct urb_tq_entry { -+ struct urb *urb; -+ DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries; -+} urb_tq_entry_t; -+ -+DWC_TAILQ_HEAD(urb_list, urb_tq_entry); -+ -+/** -+ * This structure holds the state of the HCD, including the non-periodic and -+ * periodic schedules. -+ */ -+struct dwc_otg_hcd { -+ /** The DWC otg device pointer */ -+ struct dwc_otg_device *otg_dev; -+ /** DWC OTG Core Interface Layer */ -+ dwc_otg_core_if_t *core_if; -+ -+ /** Function HCD driver callbacks */ -+ struct dwc_otg_hcd_function_ops *fops; -+ -+ /** Internal DWC HCD Flags */ -+ volatile union dwc_otg_hcd_internal_flags { -+ uint32_t d32; -+ struct { -+ unsigned port_connect_status_change:1; -+ unsigned port_connect_status:1; -+ unsigned port_reset_change:1; -+ unsigned port_enable_change:1; -+ unsigned port_suspend_change:1; -+ unsigned port_over_current_change:1; -+ unsigned port_l1_change:1; -+ unsigned reserved:26; -+ } b; -+ } flags; -+ -+ /** -+ * Inactive items in the non-periodic schedule. This is a list of -+ * Queue Heads. Transfers associated with these Queue Heads are not -+ * currently assigned to a host channel. -+ */ -+ dwc_list_link_t non_periodic_sched_inactive; -+ -+ /** -+ * Active items in the non-periodic schedule. This is a list of -+ * Queue Heads. Transfers associated with these Queue Heads are -+ * currently assigned to a host channel. -+ */ -+ dwc_list_link_t non_periodic_sched_active; -+ -+ /** -+ * Pointer to the next Queue Head to process in the active -+ * non-periodic schedule. -+ */ -+ dwc_list_link_t *non_periodic_qh_ptr; -+ -+ /** -+ * Inactive items in the periodic schedule. This is a list of QHs for -+ * periodic transfers that are _not_ scheduled for the next frame. -+ * Each QH in the list has an interval counter that determines when it -+ * needs to be scheduled for execution. This scheduling mechanism -+ * allows only a simple calculation for periodic bandwidth used (i.e. -+ * must assume that all periodic transfers may need to execute in the -+ * same frame). However, it greatly simplifies scheduling and should -+ * be sufficient for the vast majority of OTG hosts, which need to -+ * connect to a small number of peripherals at one time. -+ * -+ * Items move from this list to periodic_sched_ready when the QH -+ * interval counter is 0 at SOF. -+ */ -+ dwc_list_link_t periodic_sched_inactive; -+ -+ /** -+ * List of periodic QHs that are ready for execution in the next -+ * frame, but have not yet been assigned to host channels. -+ * -+ * Items move from this list to periodic_sched_assigned as host -+ * channels become available during the current frame. -+ */ -+ dwc_list_link_t periodic_sched_ready; -+ -+ /** -+ * List of periodic QHs to be executed in the next frame that are -+ * assigned to host channels. -+ * -+ * Items move from this list to periodic_sched_queued as the -+ * transactions for the QH are queued to the DWC_otg controller. -+ */ -+ dwc_list_link_t periodic_sched_assigned; -+ -+ /** -+ * List of periodic QHs that have been queued for execution. -+ * -+ * Items move from this list to either periodic_sched_inactive or -+ * periodic_sched_ready when the channel associated with the transfer -+ * is released. If the interval for the QH is 1, the item moves to -+ * periodic_sched_ready because it must be rescheduled for the next -+ * frame. Otherwise, the item moves to periodic_sched_inactive. -+ */ -+ dwc_list_link_t periodic_sched_queued; -+ -+ /** -+ * Total bandwidth claimed so far for periodic transfers. This value -+ * is in microseconds per (micro)frame. The assumption is that all -+ * periodic transfers may occur in the same (micro)frame. -+ */ -+ uint16_t periodic_usecs; -+ -+ /** -+ * Total bandwidth claimed so far for all periodic transfers -+ * in a frame. -+ * This will include a mixture of HS and FS transfers. -+ * Units are microseconds per (micro)frame. -+ * We have a budget per frame and have to schedule -+ * transactions accordingly. -+ * Watch out for the fact that things are actually scheduled for the -+ * "next frame". -+ */ -+ uint16_t frame_usecs[8]; -+ -+ -+ /** -+ * Frame number read from the core at SOF. The value ranges from 0 to -+ * DWC_HFNUM_MAX_FRNUM. -+ */ -+ uint16_t frame_number; -+ -+ /** -+ * Count of periodic QHs, if using several eps. For SOF enable/disable. -+ */ -+ uint16_t periodic_qh_count; -+ -+ /** -+ * Free host channels in the controller. This is a list of -+ * dwc_hc_t items. -+ */ -+ struct hc_list free_hc_list; -+ /** -+ * Number of host channels assigned to periodic transfers. Currently -+ * assuming that there is a dedicated host channel for each periodic -+ * transaction and at least one host channel available for -+ * non-periodic transactions. -+ */ -+ int periodic_channels; /* microframe_schedule==0 */ -+ -+ /** -+ * Number of host channels assigned to non-periodic transfers. -+ */ -+ int non_periodic_channels; /* microframe_schedule==0 */ -+ -+ /** -+ * Number of host channels assigned to non-periodic transfers. -+ */ -+ int available_host_channels; -+ -+ /** -+ * Array of pointers to the host channel descriptors. Allows accessing -+ * a host channel descriptor given the host channel number. This is -+ * useful in interrupt handlers. -+ */ -+ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS]; -+ -+ /** -+ * Buffer to use for any data received during the status phase of a -+ * control transfer. Normally no data is transferred during the status -+ * phase. This buffer is used as a bit bucket. -+ */ -+ uint8_t *status_buf; -+ -+ /** -+ * DMA address for status_buf. -+ */ -+ dma_addr_t status_buf_dma; -+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 -+ -+ /** -+ * Connection timer. An OTG host must display a message if the device -+ * does not connect. Started when the VBus power is turned on via -+ * sysfs attribute "buspower". -+ */ -+ dwc_timer_t *conn_timer; -+ -+ /* Tasket to do a reset */ -+ dwc_tasklet_t *reset_tasklet; -+ -+ dwc_tasklet_t *completion_tasklet; -+ struct urb_list completed_urb_list; -+ -+ /* */ -+ dwc_spinlock_t *lock; -+ dwc_spinlock_t *channel_lock; -+ /** -+ * Private data that could be used by OS wrapper. -+ */ -+ void *priv; -+ -+ uint8_t otg_port; -+ -+ /** Frame List */ -+ uint32_t *frame_list; -+ -+ /** Hub - Port assignment */ -+ int hub_port[128]; -+#ifdef FIQ_DEBUG -+ int hub_port_alloc[2048]; -+#endif -+ -+ /** Frame List DMA address */ -+ dma_addr_t frame_list_dma; -+ -+ struct fiq_stack *fiq_stack; -+ struct fiq_state *fiq_state; -+ -+ /** Virtual address for split transaction DMA bounce buffers */ -+ struct fiq_dma_blob *fiq_dmab; -+ -+#ifdef DEBUG -+ uint32_t frrem_samples; -+ uint64_t frrem_accum; -+ -+ uint32_t hfnum_7_samples_a; -+ uint64_t hfnum_7_frrem_accum_a; -+ uint32_t hfnum_0_samples_a; -+ uint64_t hfnum_0_frrem_accum_a; -+ uint32_t hfnum_other_samples_a; -+ uint64_t hfnum_other_frrem_accum_a; -+ -+ uint32_t hfnum_7_samples_b; -+ uint64_t hfnum_7_frrem_accum_b; -+ uint32_t hfnum_0_samples_b; -+ uint64_t hfnum_0_frrem_accum_b; -+ uint32_t hfnum_other_samples_b; -+ uint64_t hfnum_other_frrem_accum_b; -+#endif -+}; -+ -+static inline struct device *dwc_otg_hcd_to_dev(struct dwc_otg_hcd *hcd) -+{ -+ return &hcd->otg_dev->os_dep.platformdev->dev; -+} -+ -+/** @name Transaction Execution Functions */ -+/** @{ */ -+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t -+ * hcd); -+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd, -+ dwc_otg_transaction_type_e tr_type); -+ -+int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh); -+void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh); -+ -+extern int fiq_fsm_queue_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); -+extern int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh); -+extern void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num); -+ -+/** @} */ -+ -+/** @name Interrupt Handler Functions */ -+/** @{ */ -+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, -+ uint32_t num); -+extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t * -+ dwc_otg_hcd); -+/** @} */ -+ -+/** @name Schedule Queue Functions */ -+/** @{ */ -+ -+/* Implemented in dwc_otg_hcd_queue.c */ -+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * urb, int atomic_alloc); -+extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ int sched_csplit); -+ -+/** Remove and free a QH */ -+static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd, -+ dwc_otg_qh_t * qh) -+{ -+ dwc_irqflags_t flags; -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ dwc_otg_hcd_qh_free(hcd, qh); -+} -+ -+/** Allocates memory for a QH structure. -+ * @return Returns the memory allocate or NULL on error. */ -+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc) -+{ -+ if (atomic_alloc) -+ return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t)); -+ else -+ return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t)); -+} -+ -+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, -+ int atomic_alloc); -+extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb); -+extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd, -+ dwc_otg_qh_t ** qh, int atomic_alloc); -+ -+/** Allocates memory for a QTD structure. -+ * @return Returns the memory allocate or NULL on error. */ -+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc) -+{ -+ if (atomic_alloc) -+ return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t)); -+ else -+ return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t)); -+} -+ -+/** Frees the memory for a QTD structure. QTD should already be removed from -+ * list. -+ * @param qtd QTD to free.*/ -+static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd) -+{ -+ DWC_FREE(qtd); -+} -+ -+/** Removes a QTD from list. -+ * @param hcd HCD instance. -+ * @param qtd QTD to remove from list. -+ * @param qh QTD belongs to. -+ */ -+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_qh_t * qh) -+{ -+ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); -+} -+ -+/** Remove and free a QTD -+ * Need to disable IRQ and hold hcd lock while calling this function out of -+ * interrupt servicing chain */ -+static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_qh_t * qh) -+{ -+ dwc_otg_hcd_qtd_remove(hcd, qtd, qh); -+ dwc_otg_hcd_qtd_free(qtd); -+} -+ -+/** @} */ -+ -+/** @name Descriptor DMA Supporting Functions */ -+/** @{ */ -+ -+extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status); -+ -+extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh); -+ -+/** @} */ -+ -+/** @name Internal Functions */ -+/** @{ */ -+dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb); -+/** @} */ -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, -+ uint8_t devaddr); -+extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd); -+#endif -+ -+/** Gets the QH that contains the list_head */ -+#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) -+ -+/** Gets the QTD that contains the list_head */ -+#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) -+ -+/** Check if QH is non-periodic */ -+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \ -+ (_qh_ptr_->ep_type == UE_CONTROL)) -+ -+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ -+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) -+ -+/** Packet size for any kind of endpoint descriptor */ -+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) -+ -+/** -+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is -+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the -+ * frame number when the max frame number is reached. -+ */ -+static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) -+{ -+ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= -+ (DWC_HFNUM_MAX_FRNUM >> 1); -+} -+ -+/** -+ * Returns true if _frame1 is greater than _frame2. The comparison is done -+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame -+ * number when the max frame number is reached. -+ */ -+static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) -+{ -+ return (frame1 != frame2) && -+ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < -+ (DWC_HFNUM_MAX_FRNUM >> 1)); -+} -+ -+/** -+ * Increments _frame by the amount specified by _inc. The addition is done -+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. -+ */ -+static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) -+{ -+ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; -+} -+ -+static inline uint16_t dwc_full_frame_num(uint16_t frame) -+{ -+ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; -+} -+ -+static inline uint16_t dwc_micro_frame_num(uint16_t frame) -+{ -+ return frame & 0x7; -+} -+ -+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd); -+ -+#ifdef DEBUG -+/** -+ * Macro to sample the remaining PHY clocks left in the current frame. This -+ * may be used during debugging to determine the average time it takes to -+ * execute sections of code. There are two possible sample points, "a" and -+ * "b", so the _letter argument must be one of these values. -+ * -+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For -+ * example, "cat /sys/devices/lm0/hcd_frrem". -+ */ -+#define dwc_sample_frrem(_hcd, _qh, _letter) \ -+{ \ -+ hfnum_data_t hfnum; \ -+ dwc_otg_qtd_t *qtd; \ -+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ -+ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ -+ hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ -+ switch (hfnum.b.frnum & 0x7) { \ -+ case 7: \ -+ _hcd->hfnum_7_samples_##_letter++; \ -+ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ -+ break; \ -+ case 0: \ -+ _hcd->hfnum_0_samples_##_letter++; \ -+ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ -+ break; \ -+ default: \ -+ _hcd->hfnum_other_samples_##_letter++; \ -+ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ -+ break; \ -+ } \ -+ } \ -+} -+#else -+#define dwc_sample_frrem(_hcd, _qh, _letter) -+#endif -+#endif -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c -@@ -0,0 +1,1139 @@ -+/*========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $ -+ * $Revision: #10 $ -+ * $Date: 2011/10/20 $ -+ * $Change: 1869464 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** @file -+ * This file contains Descriptor DMA support implementation for host mode. -+ */ -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+ -+extern bool microframe_schedule; -+ -+static inline uint8_t frame_list_idx(uint16_t frame) -+{ -+ return (frame & (MAX_FRLIST_EN_NUM - 1)); -+} -+ -+static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed) -+{ -+ return (idx + inc) & -+ (((speed == -+ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : -+ MAX_DMA_DESC_NUM_GENERIC) - 1); -+} -+ -+static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed) -+{ -+ return (idx - inc) & -+ (((speed == -+ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC : -+ MAX_DMA_DESC_NUM_GENERIC) - 1); -+} -+ -+static inline uint16_t max_desc_num(dwc_otg_qh_t * qh) -+{ -+ return (((qh->ep_type == UE_ISOCHRONOUS) -+ && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)) -+ ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC); -+} -+static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh) -+{ -+ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) -+ ? ((qh->interval + 8 - 1) / 8) -+ : qh->interval); -+} -+ -+static int desc_list_alloc(struct device *dev, dwc_otg_qh_t * qh) -+{ -+ int retval = 0; -+ -+ qh->desc_list = (dwc_otg_host_dma_desc_t *) -+ DWC_DMA_ALLOC(dev, sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh), -+ &qh->desc_list_dma); -+ -+ if (!qh->desc_list) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__); -+ -+ } -+ -+ dwc_memset(qh->desc_list, 0x00, -+ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); -+ -+ qh->n_bytes = -+ (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh)); -+ -+ if (!qh->n_bytes) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR -+ ("%s: Failed to allocate array for descriptors' size actual values\n", -+ __func__); -+ -+ } -+ return retval; -+ -+} -+ -+static void desc_list_free(struct device *dev, dwc_otg_qh_t * qh) -+{ -+ if (qh->desc_list) { -+ DWC_DMA_FREE(dev, max_desc_num(qh), qh->desc_list, -+ qh->desc_list_dma); -+ qh->desc_list = NULL; -+ } -+ -+ if (qh->n_bytes) { -+ DWC_FREE(qh->n_bytes); -+ qh->n_bytes = NULL; -+ } -+} -+ -+static int frame_list_alloc(dwc_otg_hcd_t * hcd) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ int retval = 0; -+ -+ if (hcd->frame_list) -+ return 0; -+ -+ hcd->frame_list = DWC_DMA_ALLOC(dev, 4 * MAX_FRLIST_EN_NUM, -+ &hcd->frame_list_dma); -+ if (!hcd->frame_list) { -+ retval = -DWC_E_NO_MEMORY; -+ DWC_ERROR("%s: Frame List allocation failed\n", __func__); -+ } -+ -+ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM); -+ -+ return retval; -+} -+ -+static void frame_list_free(dwc_otg_hcd_t * hcd) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ if (!hcd->frame_list) -+ return; -+ -+ DWC_DMA_FREE(dev, 4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma); -+ hcd->frame_list = NULL; -+} -+ -+static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en) -+{ -+ -+ hcfg_data_t hcfg; -+ -+ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); -+ -+ if (hcfg.b.perschedena) { -+ /* already enabled */ -+ return; -+ } -+ -+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr, -+ hcd->frame_list_dma); -+ -+ switch (fr_list_en) { -+ case 64: -+ hcfg.b.frlisten = 3; -+ break; -+ case 32: -+ hcfg.b.frlisten = 2; -+ break; -+ case 16: -+ hcfg.b.frlisten = 1; -+ break; -+ case 8: -+ hcfg.b.frlisten = 0; -+ break; -+ default: -+ break; -+ } -+ -+ hcfg.b.perschedena = 1; -+ -+ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n"); -+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+ -+} -+ -+static void per_sched_disable(dwc_otg_hcd_t * hcd) -+{ -+ hcfg_data_t hcfg; -+ -+ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg); -+ -+ if (!hcfg.b.perschedena) { -+ /* already disabled */ -+ return; -+ } -+ hcfg.b.perschedena = 0; -+ -+ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n"); -+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32); -+} -+ -+/* -+ * Activates/Deactivates FrameList entries for the channel -+ * based on endpoint servicing period. -+ */ -+void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable) -+{ -+ uint16_t i, j, inc; -+ dwc_hc_t *hc = NULL; -+ -+ if (!qh->channel) { -+ DWC_ERROR("qh->channel = %p", qh->channel); -+ return; -+ } -+ -+ if (!hcd) { -+ DWC_ERROR("------hcd = %p", hcd); -+ return; -+ } -+ -+ if (!hcd->frame_list) { -+ DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list); -+ return; -+ } -+ -+ hc = qh->channel; -+ inc = frame_incr_val(qh); -+ if (qh->ep_type == UE_ISOCHRONOUS) -+ i = frame_list_idx(qh->sched_frame); -+ else -+ i = 0; -+ -+ j = i; -+ do { -+ if (enable) -+ hcd->frame_list[j] |= (1 << hc->hc_num); -+ else -+ hcd->frame_list[j] &= ~(1 << hc->hc_num); -+ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1); -+ } -+ while (j != i); -+ if (!enable) -+ return; -+ hc->schinfo = 0; -+ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) { -+ j = 1; -+ /* TODO - check this */ -+ inc = (8 + qh->interval - 1) / qh->interval; -+ for (i = 0; i < inc; i++) { -+ hc->schinfo |= j; -+ j = j << qh->interval; -+ } -+ } else { -+ hc->schinfo = 0xff; -+ } -+} -+ -+#if 1 -+void dump_frame_list(dwc_otg_hcd_t * hcd) -+{ -+ int i = 0; -+ DWC_PRINTF("--FRAME LIST (hex) --\n"); -+ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) { -+ DWC_PRINTF("%x\t", hcd->frame_list[i]); -+ if (!(i % 8) && i) -+ DWC_PRINTF("\n"); -+ } -+ DWC_PRINTF("\n----\n"); -+ -+} -+#endif -+ -+static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ dwc_irqflags_t flags; -+ dwc_spinlock_t *channel_lock = hcd->channel_lock; -+ -+ dwc_hc_t *hc = qh->channel; -+ if (dwc_qh_is_non_per(qh)) { -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ if (!microframe_schedule) -+ hcd->non_periodic_channels--; -+ else -+ hcd->available_host_channels++; -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ } else -+ update_frame_list(hcd, qh, 0); -+ -+ /* -+ * The condition is added to prevent double cleanup try in case of device -+ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb(). -+ */ -+ if (hc->qh) { -+ dwc_otg_hc_cleanup(hcd->core_if, hc); -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); -+ hc->qh = NULL; -+ } -+ -+ qh->channel = NULL; -+ qh->ntd = 0; -+ -+ if (qh->desc_list) { -+ dwc_memset(qh->desc_list, 0x00, -+ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh)); -+ } -+} -+ -+/** -+ * Initializes a QH structure's Descriptor DMA related members. -+ * Allocates memory for descriptor list. -+ * On first periodic QH, allocates memory for FrameList -+ * and enables periodic scheduling. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ int retval = 0; -+ -+ if (qh->do_split) { -+ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n"); -+ return -1; -+ } -+ -+ retval = desc_list_alloc(dev, qh); -+ -+ if ((retval == 0) -+ && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) { -+ if (!hcd->frame_list) { -+ retval = frame_list_alloc(hcd); -+ /* Enable periodic schedule on first periodic QH */ -+ if (retval == 0) -+ per_sched_enable(hcd, MAX_FRLIST_EN_NUM); -+ } -+ } -+ -+ qh->ntd = 0; -+ -+ return retval; -+} -+ -+/** -+ * Frees descriptor list memory associated with the QH. -+ * If QH is periodic and the last, frees FrameList memory -+ * and disables periodic scheduling. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ */ -+void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ desc_list_free(dev, qh); -+ -+ /* -+ * Channel still assigned due to some reasons. -+ * Seen on Isoc URB dequeue. Channel halted but no subsequent -+ * ChHalted interrupt to release the channel. Afterwards -+ * when it comes here from endpoint disable routine -+ * channel remains assigned. -+ */ -+ if (qh->channel) -+ release_channel_ddma(hcd, qh); -+ -+ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT) -+ && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) { -+ -+ per_sched_disable(hcd); -+ frame_list_free(hcd); -+ } -+} -+ -+static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx) -+{ -+ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { -+ /* -+ * Descriptor set(8 descriptors) index -+ * which is 8-aligned. -+ */ -+ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8; -+ } else { -+ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1)); -+ } -+} -+ -+/* -+ * Determine starting frame for Isochronous transfer. -+ * Few frames skipped to prevent race condition with HC. -+ */ -+static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ uint8_t * skip_frames) -+{ -+ uint16_t frame = 0; -+ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd); -+ -+ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */ -+ -+ /* -+ * skip_frames is used to limit activated descriptors number -+ * to avoid the situation when HC services the last activated -+ * descriptor firstly. -+ * Example for FS: -+ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor -+ * corresponding to curr_frame+1, the descriptor corresponding to frame 2 -+ * will be fetched. If the number of descriptors is max=64 (or greather) the -+ * list will be fully programmed with Active descriptors and it is possible -+ * case(rare) that the latest descriptor(considering rollback) corresponding -+ * to frame 2 will be serviced first. HS case is more probable because, in fact, -+ * up to 11 uframes(16 in the code) may be skipped. -+ */ -+ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) { -+ /* -+ * Consider uframe counter also, to start xfer asap. -+ * If half of the frame elapsed skip 2 frames otherwise -+ * just 1 frame. -+ * Starting descriptor index must be 8-aligned, so -+ * if the current frame is near to complete the next one -+ * is skipped as well. -+ */ -+ -+ if (dwc_micro_frame_num(hcd->frame_number) >= 5) { -+ *skip_frames = 2 * 8; -+ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); -+ } else { -+ *skip_frames = 1 * 8; -+ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames); -+ } -+ -+ frame = dwc_full_frame_num(frame); -+ } else { -+ /* -+ * Two frames are skipped for FS - the current and the next. -+ * But for descriptor programming, 1 frame(descriptor) is enough, -+ * see example above. -+ */ -+ *skip_frames = 1; -+ frame = dwc_frame_num_inc(hcd->frame_number, 2); -+ } -+ -+ return frame; -+} -+ -+/* -+ * Calculate initial descriptor index for isochronous transfer -+ * based on scheduled frame. -+ */ -+static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ uint16_t frame = 0, fr_idx, fr_idx_tmp; -+ uint8_t skip_frames = 0; -+ /* -+ * With current ISOC processing algorithm the channel is being -+ * released when no more QTDs in the list(qh->ntd == 0). -+ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0. -+ * -+ * So qh->channel != NULL branch is not used and just not removed from the -+ * source file. It is required for another possible approach which is, -+ * do not disable and release the channel when ISOC session completed, -+ * just move QH to inactive schedule until new QTD arrives. -+ * On new QTD, the QH moved back to 'ready' schedule, -+ * starting frame and therefore starting desc_index are recalculated. -+ * In this case channel is released only on ep_disable. -+ */ -+ -+ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */ -+ if (qh->channel) { -+ frame = calc_starting_frame(hcd, qh, &skip_frames); -+ /* -+ * Calculate initial descriptor index based on FrameList current bitmap -+ * and servicing period. -+ */ -+ fr_idx_tmp = frame_list_idx(frame); -+ fr_idx = -+ (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) - -+ fr_idx_tmp) -+ % frame_incr_val(qh); -+ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM; -+ } else { -+ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames); -+ fr_idx = frame_list_idx(qh->sched_frame); -+ } -+ -+ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx); -+ -+ return skip_frames; -+} -+ -+#define ISOC_URB_GIVEBACK_ASAP -+ -+#define MAX_ISOC_XFER_SIZE_FS 1023 -+#define MAX_ISOC_XFER_SIZE_HS 3072 -+#define DESCNUM_THRESHOLD 4 -+ -+static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ uint8_t skip_frames) -+{ -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ dwc_otg_qtd_t *qtd; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size; -+ -+ idx = qh->td_last; -+ inc = qh->interval; -+ n_desc = 0; -+ -+ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval; -+ if (skip_frames && !qh->channel) -+ ntd_max = ntd_max - skip_frames / qh->interval; -+ -+ max_xfer_size = -+ (qh->dev_speed == -+ DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS : -+ MAX_ISOC_XFER_SIZE_FS; -+ -+ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { -+ while ((qh->ntd < ntd_max) -+ && (qtd->isoc_frame_index_last < -+ qtd->urb->packet_count)) { -+ -+ dma_desc = &qh->desc_list[idx]; -+ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t)); -+ -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last]; -+ -+ if (frame_desc->length > max_xfer_size) -+ qh->n_bytes[idx] = max_xfer_size; -+ else -+ qh->n_bytes[idx] = frame_desc->length; -+ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx]; -+ dma_desc->status.b_isoc.a = 1; -+ dma_desc->status.b_isoc.sts = 0; -+ -+ dma_desc->buf = qtd->urb->dma + frame_desc->offset; -+ -+ qh->ntd++; -+ -+ qtd->isoc_frame_index_last++; -+ -+#ifdef ISOC_URB_GIVEBACK_ASAP -+ /* -+ * Set IOC for each descriptor corresponding to the -+ * last frame of the URB. -+ */ -+ if (qtd->isoc_frame_index_last == -+ qtd->urb->packet_count) -+ dma_desc->status.b_isoc.ioc = 1; -+ -+#endif -+ idx = desclist_idx_inc(idx, inc, qh->dev_speed); -+ n_desc++; -+ -+ } -+ qtd->in_process = 1; -+ } -+ -+ qh->td_last = idx; -+ -+#ifdef ISOC_URB_GIVEBACK_ASAP -+ /* Set IOC for the last descriptor if descriptor list is full */ -+ if (qh->ntd == ntd_max) { -+ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed); -+ qh->desc_list[idx].status.b_isoc.ioc = 1; -+ } -+#else -+ /* -+ * Set IOC bit only for one descriptor. -+ * Always try to be ahead of HW processing, -+ * i.e. on IOC generation driver activates next descriptors but -+ * core continues to process descriptors followed the one with IOC set. -+ */ -+ -+ if (n_desc > DESCNUM_THRESHOLD) { -+ /* -+ * Move IOC "up". Required even if there is only one QTD -+ * in the list, cause QTDs migth continue to be queued, -+ * but during the activation it was only one queued. -+ * Actually more than one QTD might be in the list if this function called -+ * from XferCompletion - QTDs was queued during HW processing of the previous -+ * descriptor chunk. -+ */ -+ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed); -+ } else { -+ /* -+ * Set the IOC for the latest descriptor -+ * if either number of descriptor is not greather than threshold -+ * or no more new descriptors activated. -+ */ -+ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed); -+ } -+ -+ qh->desc_list[idx].status.b_isoc.ioc = 1; -+#endif -+} -+ -+static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ -+ dwc_hc_t *hc; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ dwc_otg_qtd_t *qtd; -+ int num_packets, len, n_desc = 0; -+ -+ hc = qh->channel; -+ -+ /* -+ * Start with hc->xfer_buff initialized in -+ * assign_and_init_hc(), then if SG transfer consists of multiple URBs, -+ * this pointer re-assigned to the buffer of the currently processed QTD. -+ * For non-SG request there is always one QTD active. -+ */ -+ -+ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) { -+ -+ if (n_desc) { -+ /* SG request - more than 1 QTDs */ -+ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length; -+ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length; -+ } -+ -+ qtd->n_desc = 0; -+ -+ do { -+ dma_desc = &qh->desc_list[n_desc]; -+ len = hc->xfer_len; -+ -+ if (len > MAX_DMA_DESC_SIZE) -+ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1; -+ -+ if (hc->ep_is_in) { -+ if (len > 0) { -+ num_packets = (len + hc->max_packet - 1) / hc->max_packet; -+ } else { -+ /* Need 1 packet for transfer length of 0. */ -+ num_packets = 1; -+ } -+ /* Always program an integral # of max packets for IN transfers. */ -+ len = num_packets * hc->max_packet; -+ } -+ -+ dma_desc->status.b.n_bytes = len; -+ -+ qh->n_bytes[n_desc] = len; -+ -+ if ((qh->ep_type == UE_CONTROL) -+ && (qtd->control_phase == DWC_OTG_CONTROL_SETUP)) -+ dma_desc->status.b.sup = 1; /* Setup Packet */ -+ -+ dma_desc->status.b.a = 1; /* Active descriptor */ -+ dma_desc->status.b.sts = 0; -+ -+ dma_desc->buf = -+ ((unsigned long)hc->xfer_buff & 0xffffffff); -+ -+ /* -+ * Last descriptor(or single) of IN transfer -+ * with actual size less than MaxPacket. -+ */ -+ if (len > hc->xfer_len) { -+ hc->xfer_len = 0; -+ } else { -+ hc->xfer_buff += len; -+ hc->xfer_len -= len; -+ } -+ -+ qtd->n_desc++; -+ n_desc++; -+ } -+ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC)); -+ -+ -+ qtd->in_process = 1; -+ -+ if (qh->ep_type == UE_CONTROL) -+ break; -+ -+ if (n_desc == MAX_DMA_DESC_NUM_GENERIC) -+ break; -+ } -+ -+ if (n_desc) { -+ /* Request Transfer Complete interrupt for the last descriptor */ -+ qh->desc_list[n_desc - 1].status.b.ioc = 1; -+ /* End of List indicator */ -+ qh->desc_list[n_desc - 1].status.b.eol = 1; -+ -+ hc->ntd = n_desc; -+ } -+} -+ -+/** -+ * For Control and Bulk endpoints initializes descriptor list -+ * and starts the transfer. -+ * -+ * For Interrupt and Isochronous endpoints initializes descriptor list -+ * then updates FrameList, marking appropriate entries as active. -+ * In case of Isochronous, the starting descriptor index is calculated based -+ * on the scheduled frame, but only on the first transfer descriptor within a session. -+ * Then starts the transfer via enabling the channel. -+ * For Isochronous endpoint the channel is not halted on XferComplete -+ * interrupt so remains assigned to the endpoint(QH) until session is done. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ /* Channel is already assigned */ -+ dwc_hc_t *hc = qh->channel; -+ uint8_t skip_frames = 0; -+ -+ switch (hc->ep_type) { -+ case DWC_OTG_EP_TYPE_CONTROL: -+ case DWC_OTG_EP_TYPE_BULK: -+ init_non_isoc_dma_desc(hcd, qh); -+ -+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); -+ break; -+ case DWC_OTG_EP_TYPE_INTR: -+ init_non_isoc_dma_desc(hcd, qh); -+ -+ update_frame_list(hcd, qh, 1); -+ -+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); -+ break; -+ case DWC_OTG_EP_TYPE_ISOC: -+ -+ if (!qh->ntd) -+ skip_frames = recalc_initial_desc_idx(hcd, qh); -+ -+ init_isoc_dma_desc(hcd, qh, skip_frames); -+ -+ if (!hc->xfer_started) { -+ -+ update_frame_list(hcd, qh, 1); -+ -+ /* -+ * Always set to max, instead of actual size. -+ * Otherwise ntd will be changed with -+ * channel being enabled. Not recommended. -+ * -+ */ -+ hc->ntd = max_desc_num(qh); -+ /* Enable channel only once for ISOC */ -+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc); -+ } -+ -+ break; -+ default: -+ -+ break; -+ } -+} -+ -+static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status) -+{ -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ dwc_otg_qh_t *qh; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ uint16_t idx, remain; -+ uint8_t urb_compl; -+ -+ qh = hc->qh; -+ idx = qh->td_first; -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) -+ qtd->in_process = 0; -+ return; -+ } else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) || -+ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) { -+ /* -+ * Channel is halted in these error cases. -+ * Considered as serious issues. -+ * Complete all URBs marking all frames as failed, -+ * irrespective whether some of the descriptors(frames) succeeded or no. -+ * Pass error code to completion routine as well, to -+ * update urb->status, some of class drivers might use it to stop -+ * queing transfer requests. -+ */ -+ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR) -+ ? (-DWC_E_IO) -+ : (-DWC_E_OVERFLOW); -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { -+ for (idx = 0; idx < qtd->urb->packet_count; idx++) { -+ frame_desc = &qtd->urb->iso_descs[idx]; -+ frame_desc->status = err; -+ } -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ } -+ return; -+ } -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { -+ -+ if (!qtd->in_process) -+ break; -+ -+ urb_compl = 0; -+ -+ do { -+ -+ dma_desc = &qh->desc_list[idx]; -+ -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0; -+ -+ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) { -+ /* -+ * XactError or, unable to complete all the transactions -+ * in the scheduled micro-frame/frame, -+ * both indicated by DMA_DESC_STS_PKTERR. -+ */ -+ qtd->urb->error_count++; -+ frame_desc->actual_length = qh->n_bytes[idx] - remain; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ } else { -+ /* Success */ -+ -+ frame_desc->actual_length = qh->n_bytes[idx] - remain; -+ frame_desc->status = 0; -+ } -+ -+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { -+ /* -+ * urb->status is not used for isoc transfers here. -+ * The individual frame_desc status are used instead. -+ */ -+ -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ -+ /* -+ * This check is necessary because urb_dequeue can be called -+ * from urb complete callback(sound driver example). -+ * All pending URBs are dequeued there, so no need for -+ * further processing. -+ */ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ return; -+ } -+ -+ urb_compl = 1; -+ -+ } -+ -+ qh->ntd--; -+ -+ /* Stop if IOC requested descriptor reached */ -+ if (dma_desc->status.b_isoc.ioc) { -+ idx = desclist_idx_inc(idx, qh->interval, hc->speed); -+ goto stop_scan; -+ } -+ -+ idx = desclist_idx_inc(idx, qh->interval, hc->speed); -+ -+ if (urb_compl) -+ break; -+ } -+ while (idx != qh->td_first); -+ } -+stop_scan: -+ qh->td_first = idx; -+} -+ -+uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_host_dma_desc_t * dma_desc, -+ dwc_otg_halt_status_e halt_status, -+ uint32_t n_bytes, uint8_t * xfer_done) -+{ -+ -+ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0; -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ -+ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) { -+ urb->status = -DWC_E_IO; -+ return 1; -+ } -+ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) { -+ switch (halt_status) { -+ case DWC_OTG_HC_XFER_STALL: -+ urb->status = -DWC_E_PIPE; -+ break; -+ case DWC_OTG_HC_XFER_BABBLE_ERR: -+ urb->status = -DWC_E_OVERFLOW; -+ break; -+ case DWC_OTG_HC_XFER_XACT_ERR: -+ urb->status = -DWC_E_PROTOCOL; -+ break; -+ default: -+ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__, -+ halt_status); -+ break; -+ } -+ return 1; -+ } -+ -+ if (dma_desc->status.b.a == 1) { -+ DWC_DEBUGPL(DBG_HCDV, -+ "Active descriptor encountered on channel %d\n", -+ hc->hc_num); -+ return 0; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) { -+ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { -+ urb->actual_length += n_bytes - remain; -+ if (remain || urb->actual_length == urb->length) { -+ /* -+ * For Control Data stage do not set urb->status=0 to prevent -+ * URB callback. Set it when Status phase done. See below. -+ */ -+ *xfer_done = 1; -+ } -+ -+ } else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) { -+ urb->status = 0; -+ *xfer_done = 1; -+ } -+ /* No handling for SETUP stage */ -+ } else { -+ /* BULK and INTR */ -+ urb->actual_length += n_bytes - remain; -+ if (remain || urb->actual_length == urb->length) { -+ urb->status = 0; -+ *xfer_done = 1; -+ } -+ } -+ -+ return 0; -+} -+ -+static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status) -+{ -+ dwc_otg_hcd_urb_t *urb = NULL; -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ dwc_otg_qh_t *qh; -+ dwc_otg_host_dma_desc_t *dma_desc; -+ uint32_t n_bytes, n_desc, i; -+ uint8_t failed = 0, xfer_done; -+ -+ n_desc = 0; -+ -+ qh = hc->qh; -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) { -+ qtd->in_process = 0; -+ } -+ return; -+ } -+ -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { -+ -+ urb = qtd->urb; -+ -+ n_bytes = 0; -+ xfer_done = 0; -+ -+ for (i = 0; i < qtd->n_desc; i++) { -+ dma_desc = &qh->desc_list[n_desc]; -+ -+ n_bytes = qh->n_bytes[n_desc]; -+ -+ failed = -+ update_non_isoc_urb_state_ddma(hcd, hc, qtd, -+ dma_desc, -+ halt_status, n_bytes, -+ &xfer_done); -+ -+ if (failed -+ || (xfer_done -+ && (urb->status != -DWC_E_IN_PROGRESS))) { -+ -+ hcd->fops->complete(hcd, urb->priv, urb, -+ urb->status); -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ -+ if (failed) -+ goto stop_scan; -+ } else if (qh->ep_type == UE_CONTROL) { -+ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) { -+ if (urb->length > 0) { -+ qtd->control_phase = DWC_OTG_CONTROL_DATA; -+ } else { -+ qtd->control_phase = DWC_OTG_CONTROL_STATUS; -+ } -+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); -+ } else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) { -+ if (xfer_done) { -+ qtd->control_phase = DWC_OTG_CONTROL_STATUS; -+ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); -+ } else if (i + 1 == qtd->n_desc) { -+ /* -+ * Last descriptor for Control data stage which is -+ * not completed yet. -+ */ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ } -+ } -+ } -+ -+ n_desc++; -+ } -+ -+ } -+ -+stop_scan: -+ -+ if (qh->ep_type != UE_CONTROL) { -+ /* -+ * Resetting the data toggle for bulk -+ * and interrupt endpoints in case of stall. See handle_hc_stall_intr() -+ */ -+ if (halt_status == DWC_OTG_HC_XFER_STALL) -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ else -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ } -+ -+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { -+ hcint_data_t hcint; -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ if (hcint.b.nyet) { -+ /* -+ * Got a NYET on the last transaction of the transfer. It -+ * means that the endpoint should be in the PING state at the -+ * beginning of the next transfer. -+ */ -+ qh->ping_state = 1; -+ clear_hc_int(hc_regs, nyet); -+ } -+ -+ } -+ -+} -+ -+/** -+ * This function is called from interrupt handlers. -+ * Scans the descriptor list, updates URB's status and -+ * calls completion routine for the URB if it's done. -+ * Releases the channel to be used by other transfers. -+ * In case of Isochronous endpoint the channel is not halted until -+ * the end of the session, i.e. QTD list is empty. -+ * If periodic channel released the FrameList is updated accordingly. -+ * -+ * Calls transaction selection routines to activate pending transfers. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param hc Host channel, the transfer is completed on. -+ * @param hc_regs Host channel registers. -+ * @param halt_status Reason the channel is being halted, -+ * or just XferComplete for isochronous transfer -+ */ -+void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_halt_status_e halt_status) -+{ -+ uint8_t continue_isoc_xfer = 0; -+ dwc_otg_transaction_type_e tr_type; -+ dwc_otg_qh_t *qh = hc->qh; -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ -+ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); -+ -+ /* Release the channel if halted or session completed */ -+ if (halt_status != DWC_OTG_HC_XFER_COMPLETE || -+ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ -+ /* Halt the channel if session completed */ -+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { -+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); -+ } -+ -+ release_channel_ddma(hcd, qh); -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } else { -+ /* Keep in assigned schedule to continue transfer */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, -+ &qh->qh_list_entry); -+ continue_isoc_xfer = 1; -+ -+ } -+ /** @todo Consider the case when period exceeds FrameList size. -+ * Frame Rollover interrupt should be used. -+ */ -+ } else { -+ /* Scan descriptor list to complete the URB(s), then release the channel */ -+ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status); -+ -+ release_channel_ddma(hcd, qh); -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ -+ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ /* Add back to inactive non-periodic schedule on normal completion */ -+ dwc_otg_hcd_qh_add(hcd, qh); -+ } -+ -+ } -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) { -+ if (continue_isoc_xfer) { -+ if (tr_type == DWC_OTG_TRANSACTION_NONE) { -+ tr_type = DWC_OTG_TRANSACTION_PERIODIC; -+ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) { -+ tr_type = DWC_OTG_TRANSACTION_ALL; -+ } -+ } -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ } -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h -@@ -0,0 +1,417 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $ -+ * $Revision: #12 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+#ifndef __DWC_HCD_IF_H__ -+#define __DWC_HCD_IF_H__ -+ -+#include "dwc_otg_core_if.h" -+ -+/** @file -+ * This file defines DWC_OTG HCD Core API. -+ */ -+ -+struct dwc_otg_hcd; -+typedef struct dwc_otg_hcd dwc_otg_hcd_t; -+ -+struct dwc_otg_hcd_urb; -+typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t; -+ -+/** @name HCD Function Driver Callbacks */ -+/** @{ */ -+ -+/** This function is called whenever core switches to host mode. */ -+typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd); -+ -+/** This function is called when device has been disconnected */ -+typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd); -+ -+/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */ -+typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd, -+ void *urb_handle, -+ uint32_t * hub_addr, -+ uint32_t * port_addr); -+/** Via this function HCD core gets device speed */ -+typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd, -+ void *urb_handle); -+ -+/** This function is called when urb is completed */ -+typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd, -+ void *urb_handle, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int32_t status); -+ -+/** Via this function HCD core gets b_hnp_enable parameter */ -+typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd); -+ -+struct dwc_otg_hcd_function_ops { -+ dwc_otg_hcd_start_cb_t start; -+ dwc_otg_hcd_disconnect_cb_t disconnect; -+ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info; -+ dwc_otg_hcd_speed_from_urb_cb_t speed; -+ dwc_otg_hcd_complete_urb_cb_t complete; -+ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable; -+}; -+/** @} */ -+ -+/** @name HCD Core API */ -+/** @{ */ -+/** This function allocates dwc_otg_hcd structure and returns pointer on it. */ -+extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void); -+ -+/** This function should be called to initiate HCD Core. -+ * -+ * @param hcd The HCD -+ * @param core_if The DWC_OTG Core -+ * -+ * Returns -DWC_E_NO_MEMORY if no enough memory. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if); -+ -+/** Frees HCD -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd); -+ -+/** This function should be called on every hardware interrupt. -+ * -+ * @param dwc_otg_hcd The HCD -+ * -+ * Returns non zero if interrupt is handled -+ * Return 0 if interrupt is not handled -+ */ -+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd); -+ -+/** This function is used to handle the fast interrupt -+ * -+ */ -+extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void); -+ -+/** -+ * Returns private data set by -+ * dwc_otg_hcd_set_priv_data function. -+ * -+ * @param hcd The HCD -+ */ -+extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Set private data. -+ * -+ * @param hcd The HCD -+ * @param priv_data pointer to be stored in private data -+ */ -+extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data); -+ -+/** -+ * This function initializes the HCD Core. -+ * -+ * @param hcd The HCD -+ * @param fops The Function Driver Operations data structure containing pointers to all callbacks. -+ * -+ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd, -+ struct dwc_otg_hcd_function_ops *fops); -+ -+/** -+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are -+ * stopped. -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Handles hub class-specific requests. -+ * -+ * @param dwc_otg_hcd The HCD -+ * @param typeReq Request Type -+ * @param wValue wValue from control request -+ * @param wIndex wIndex from control request -+ * @param buf data buffer -+ * @param wLength data buffer length -+ * -+ * Returns -DWC_E_INVALID if invalid argument is passed -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd, -+ uint16_t typeReq, uint16_t wValue, -+ uint16_t wIndex, uint8_t * buf, -+ uint16_t wLength); -+ -+/** -+ * Returns otg port number. -+ * -+ * @param hcd The HCD -+ */ -+extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Returns OTG version - either 1.3 or 2.0. -+ * -+ * @param core_if The core_if structure pointer -+ */ -+extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if); -+ -+/** -+ * Returns 1 if currently core is acting as B host, and 0 otherwise. -+ * -+ * @param hcd The HCD -+ */ -+extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Returns current frame number. -+ * -+ * @param hcd The HCD -+ */ -+extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Dumps hcd state. -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Dump the average frame remaining at SOF. This can be used to -+ * determine average interrupt latency. Frame remaining is also shown for -+ * start transfer and two additional sample points. -+ * Currently this function is not implemented. -+ * -+ * @param hcd The HCD -+ */ -+extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd); -+ -+/** -+ * Sends LPM transaction to the local device. -+ * -+ * @param hcd The HCD -+ * @param devaddr Device Address -+ * @param hird Host initiated resume duration -+ * @param bRemoteWake Value of bRemoteWake field in LPM transaction -+ * -+ * Returns negative value if sending LPM transaction was not succeeded. -+ * Returns 0 on success. -+ */ -+extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, -+ uint8_t hird, uint8_t bRemoteWake); -+ -+/* URB interface */ -+ -+/** -+ * Allocates memory for dwc_otg_hcd_urb structure. -+ * Allocated memory should be freed by call of DWC_FREE. -+ * -+ * @param hcd The HCD -+ * @param iso_desc_count Count of ISOC descriptors -+ * @param atomic_alloc Specefies whether to perform atomic allocation. -+ */ -+extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd, -+ int iso_desc_count, -+ int atomic_alloc); -+ -+/** -+ * Set pipe information in URB. -+ * -+ * @param hcd_urb DWC_OTG URB -+ * @param devaddr Device Address -+ * @param ep_num Endpoint Number -+ * @param ep_type Endpoint Type -+ * @param ep_dir Endpoint Direction -+ * @param mps Max Packet Size -+ */ -+extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb, -+ uint8_t devaddr, uint8_t ep_num, -+ uint8_t ep_type, uint8_t ep_dir, -+ uint16_t mps); -+ -+/* Transfer flags */ -+#define URB_GIVEBACK_ASAP 0x1 -+#define URB_SEND_ZERO_PACKET 0x2 -+ -+/** -+ * Sets dwc_otg_hcd_urb parameters. -+ * -+ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function. -+ * @param urb_handle Unique handle for request, this will be passed back -+ * to function driver in completion callback. -+ * @param buf The buffer for the data -+ * @param dma The DMA buffer for the data -+ * @param buflen Transfer length -+ * @param sp Buffer for setup data -+ * @param sp_dma DMA address of setup data buffer -+ * @param flags Transfer flags -+ * @param interval Polling interval for interrupt or isochronous transfers. -+ */ -+extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb, -+ void *urb_handle, void *buf, -+ dwc_dma_t dma, uint32_t buflen, void *sp, -+ dwc_dma_t sp_dma, uint32_t flags, -+ uint16_t interval); -+ -+/** Gets status from dwc_otg_hcd_urb -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb); -+ -+/** Gets actual length from dwc_otg_hcd_urb -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * -+ dwc_otg_urb); -+ -+/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * -+ dwc_otg_urb); -+ -+/** Set ISOC descriptor offset and length -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param desc_num ISOC descriptor number -+ * @param offset Offset from beginig of buffer. -+ * @param length Transaction length -+ */ -+extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb, -+ int desc_num, uint32_t offset, -+ uint32_t length); -+ -+/** Get status of ISOC descriptor, specified by desc_num -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param desc_num ISOC descriptor number -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * -+ dwc_otg_urb, int desc_num); -+ -+/** Get actual length of ISOC descriptor, specified by desc_num -+ * -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param desc_num ISOC descriptor number -+ */ -+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t * -+ dwc_otg_urb, -+ int desc_num); -+ -+/** Queue URB. After transfer is completes, the complete callback will be called with the URB status -+ * -+ * @param dwc_otg_hcd The HCD -+ * @param dwc_otg_urb DWC_OTG URB -+ * @param ep_handle Out parameter for returning endpoint handle -+ * @param atomic_alloc Flag to do atomic allocation if needed -+ * -+ * Returns -DWC_E_NO_DEVICE if no device is connected. -+ * Returns -DWC_E_NO_MEMORY if there is no enough memory. -+ * Returns 0 on success. -+ */ -+extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, -+ void **ep_handle, int atomic_alloc); -+ -+/** De-queue the specified URB -+ * -+ * @param dwc_otg_hcd The HCD -+ * @param dwc_otg_urb DWC_OTG URB -+ */ -+extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd, -+ dwc_otg_hcd_urb_t * dwc_otg_urb); -+ -+/** Frees resources in the DWC_otg controller related to a given endpoint. -+ * Any URBs for the endpoint must already be dequeued. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function -+ * @param retry Number of retries if there are queued transfers. -+ * -+ * Returns -DWC_E_INVALID if invalid arguments are passed. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle, -+ int retry); -+ -+/* Resets the data toggle in qh structure. This function can be called from -+ * usb_clear_halt routine. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function -+ * -+ * Returns -DWC_E_INVALID if invalid arguments are passed. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle); -+ -+/** Returns 1 if status of specified port is changed and 0 otherwise. -+ * -+ * @param hcd The HCD -+ * @param port Port number -+ */ -+extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port); -+ -+/** Call this function to check if bandwidth was allocated for specified endpoint. -+ * Only for ISOC and INTERRUPT endpoints. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle -+ */ -+extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, -+ void *ep_handle); -+ -+/** Call this function to check if bandwidth was freed for specified endpoint. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle -+ */ -+extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle); -+ -+/** Returns bandwidth allocated for specified endpoint in microseconds. -+ * Only for ISOC and INTERRUPT endpoints. -+ * -+ * @param hcd The HCD -+ * @param ep_handle Endpoint handle -+ */ -+extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, -+ void *ep_handle); -+ -+/** @} */ -+ -+#endif /* __DWC_HCD_IF_H__ */ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c -@@ -0,0 +1,2727 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ -+ * $Revision: #89 $ -+ * $Date: 2011/10/20 $ -+ * $Change: 1869487 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+ -+#include <linux/jiffies.h> -+#include <asm/fiq.h> -+ -+ -+extern bool microframe_schedule; -+ -+/** @file -+ * This file contains the implementation of the HCD Interrupt handlers. -+ */ -+ -+int fiq_done, int_done; -+ -+#ifdef FIQ_DEBUG -+char buffer[1000*16]; -+int wptr; -+void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...) -+{ -+ FIQDBG_T dbg_lvl_req = FIQDBG_PORTHUB; -+ va_list args; -+ char text[17]; -+ hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) }; -+ -+ if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR) -+ { -+ local_fiq_disable(); -+ snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937); -+ va_start(args, fmt); -+ vsnprintf(text+8, 9, fmt, args); -+ va_end(args); -+ -+ memcpy(buffer + wptr, text, 16); -+ wptr = (wptr + 16) % sizeof(buffer); -+ local_fiq_enable(); -+ } -+} -+#endif -+ -+/** This function handles interrupts for the HCD. */ -+int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ int retval = 0; -+ static int last_time; -+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk; -+ hfnum_data_t hfnum; -+ haintmsk_data_t haintmsk; -+ -+#ifdef DEBUG -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ -+#endif -+ -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ -+ /* Exit from ISR if core is hibernated */ -+ if (core_if->hibernation_suspend == 1) { -+ goto exit_handler_routine; -+ } -+ DWC_SPINLOCK(dwc_otg_hcd->lock); -+ /* Check if HOST Mode */ -+ if (dwc_otg_is_host_mode(core_if)) { -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ /* Pull in from the FIQ's disabled mask */ -+ gintmsk.d32 = gintmsk.d32 | ~(dwc_otg_hcd->fiq_state->gintmsk_saved.d32); -+ dwc_otg_hcd->fiq_state->gintmsk_saved.d32 = ~0; -+ } -+ -+ if (fiq_fsm_enable && ( 0x0000FFFF & ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint))) { -+ gintsts.b.hcintr = 1; -+ } -+ -+ /* Danger will robinson: fake a SOF if necessary */ -+ if (fiq_fsm_enable && (dwc_otg_hcd->fiq_state->gintmsk_saved.b.sofintr == 1)) { -+ gintsts.b.sofintr = 1; -+ } -+ gintsts.d32 &= gintmsk.d32; -+ -+ if (fiq_enable) { -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } -+ -+ if (!gintsts.d32) { -+ goto exit_handler_routine; -+ } -+ -+#ifdef DEBUG -+ // We should be OK doing this because the common interrupts should already have been serviced -+ /* Don't print debug message in the interrupt handler on SOF */ -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ DWC_DEBUGPL(DBG_HCDI, "\n"); -+#endif -+ -+#ifdef DEBUG -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ DWC_DEBUGPL(DBG_HCDI, -+ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n", -+ gintsts.d32, core_if); -+#endif -+ hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum); -+ if (gintsts.b.sofintr) { -+ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); -+ } -+ -+ if (gintsts.b.rxstsqlvl) { -+ retval |= -+ dwc_otg_hcd_handle_rx_status_q_level_intr -+ (dwc_otg_hcd); -+ } -+ if (gintsts.b.nptxfempty) { -+ retval |= -+ dwc_otg_hcd_handle_np_tx_fifo_empty_intr -+ (dwc_otg_hcd); -+ } -+ if (gintsts.b.i2cintr) { -+ /** @todo Implement i2cintr handler. */ -+ } -+ if (gintsts.b.portintr) { -+ -+ gintmsk_data_t gintmsk = { .b.portintr = 1}; -+ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32); -+ } -+ } -+ if (gintsts.b.hcintr) { -+ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); -+ } -+ if (gintsts.b.ptxfempty) { -+ retval |= -+ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr -+ (dwc_otg_hcd); -+ } -+#ifdef DEBUG -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ { -+ DWC_DEBUGPL(DBG_HCDI, -+ "DWC OTG HCD Finished Servicing Interrupts\n"); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", -+ DWC_READ_REG32(&global_regs->gintsts)); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", -+ DWC_READ_REG32(&global_regs->gintmsk)); -+ } -+#endif -+ -+#ifdef DEBUG -+#ifndef DEBUG_SOF -+ if (gintsts.d32 != DWC_SOF_INTR_MASK) -+#endif -+ DWC_DEBUGPL(DBG_HCDI, "\n"); -+#endif -+ -+ } -+ -+exit_handler_routine: -+ if (fiq_enable) { -+ gintmsk_data_t gintmsk_new; -+ haintmsk_data_t haintmsk_new; -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ gintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->gintmsk_saved.d32; -+ if(fiq_fsm_enable) -+ haintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->haintmsk_saved.d32; -+ else -+ haintmsk_new.d32 = 0x0000FFFF; -+ -+ /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */ -+ if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) { -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16)); -+ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) { -+ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR"); -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16))); -+ while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17))) -+ ; -+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31)); -+ dwc_otg_hcd->fiq_state->mphi_int_count = 0; -+ } -+ int_done++; -+ } -+ haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk); -+ /* Re-enable interrupts that the FIQ masked (first time round) */ -+ FIQ_WRITE(dwc_otg_hcd->fiq_state->dwc_regs_base + GINTMSK, gintmsk.d32); -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ -+ if ((jiffies / HZ) > last_time) { -+ //dwc_otg_qh_t *qh; -+ //dwc_list_link_t *cur; -+ /* Once a second output the fiq and irq numbers, useful for debug */ -+ last_time = jiffies / HZ; -+ // DWC_WARN("np_kick=%d AHC=%d sched_frame=%d cur_frame=%d int_done=%d fiq_done=%d", -+ // dwc_otg_hcd->fiq_state->kick_np_queues, dwc_otg_hcd->available_host_channels, -+ // dwc_otg_hcd->fiq_state->next_sched_frame, hfnum.b.frnum, int_done, dwc_otg_hcd->fiq_state->fiq_done); -+ //printk(KERN_WARNING "Periodic queues:\n"); -+ } -+ } -+ -+ DWC_SPINUNLOCK(dwc_otg_hcd->lock); -+ return retval; -+} -+ -+#ifdef DWC_TRACK_MISSED_SOFS -+ -+#warning Compiling code to track missed SOFs -+#define FRAME_NUM_ARRAY_SIZE 1000 -+/** -+ * This function is for debug only. -+ */ -+static inline void track_missed_sofs(uint16_t curr_frame_number) -+{ -+ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; -+ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; -+ static int frame_num_idx = 0; -+ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; -+ static int dumped_frame_num_array = 0; -+ -+ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { -+ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != -+ curr_frame_number) { -+ frame_num_array[frame_num_idx] = curr_frame_number; -+ last_frame_num_array[frame_num_idx++] = last_frame_num; -+ } -+ } else if (!dumped_frame_num_array) { -+ int i; -+ DWC_PRINTF("Frame Last Frame\n"); -+ DWC_PRINTF("----- ----------\n"); -+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { -+ DWC_PRINTF("0x%04x 0x%04x\n", -+ frame_num_array[i], last_frame_num_array[i]); -+ } -+ dumped_frame_num_array = 1; -+ } -+ last_frame_num = curr_frame_number; -+} -+#endif -+ -+/** -+ * Handles the start-of-frame interrupt in host mode. Non-periodic -+ * transactions may be queued to the DWC_otg controller for the current -+ * (micro)frame. Periodic transactions may be queued to the controller for the -+ * next (micro)frame. -+ */ -+int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd) -+{ -+ hfnum_data_t hfnum; -+ gintsts_data_t gintsts = { .d32 = 0 }; -+ dwc_list_link_t *qh_entry; -+ dwc_otg_qh_t *qh; -+ dwc_otg_transaction_type_e tr_type; -+ int did_something = 0; -+ int32_t next_sched_frame = -1; -+ -+ hfnum.d32 = -+ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum); -+ -+#ifdef DEBUG_SOF -+ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); -+#endif -+ hcd->frame_number = hfnum.b.frnum; -+ -+#ifdef DEBUG -+ hcd->frrem_accum += hfnum.b.frrem; -+ hcd->frrem_samples++; -+#endif -+ -+#ifdef DWC_TRACK_MISSED_SOFS -+ track_missed_sofs(hcd->frame_number); -+#endif -+ /* Determine whether any periodic QHs should be executed. */ -+ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive); -+ while (qh_entry != &hcd->periodic_sched_inactive) { -+ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry); -+ qh_entry = qh_entry->next; -+ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { -+ -+ /* -+ * Move QH to the ready list to be executed next -+ * (micro)frame. -+ */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, -+ &qh->qh_list_entry); -+ -+ did_something = 1; -+ } -+ else -+ { -+ if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame)) -+ { -+ next_sched_frame = qh->sched_frame; -+ } -+ } -+ } -+ if (fiq_enable) -+ hcd->fiq_state->next_sched_frame = next_sched_frame; -+ -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE) { -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ did_something = 1; -+ } -+ -+ /* Clear interrupt - but do not trample on the FIQ sof */ -+ if (!fiq_fsm_enable) { -+ gintsts.b.sofintr = 1; -+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); -+ } -+ return 1; -+} -+ -+/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at -+ * least one packet in the Rx FIFO. The packets are moved from the FIFO to -+ * memory if the DWC_otg controller is operating in Slave mode. */ -+int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ host_grxsts_data_t grxsts; -+ dwc_hc_t *hc = NULL; -+ -+ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); -+ -+ grxsts.d32 = -+ DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); -+ -+ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; -+ if (!hc) { -+ DWC_ERROR("Unable to get corresponding channel\n"); -+ return 0; -+ } -+ -+ /* Packet Status */ -+ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); -+ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); -+ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, -+ hc->data_pid_start); -+ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); -+ -+ switch (grxsts.b.pktsts) { -+ case DWC_GRXSTS_PKTSTS_IN: -+ /* Read the data into the host buffer. */ -+ if (grxsts.b.bcnt > 0) { -+ dwc_otg_read_packet(dwc_otg_hcd->core_if, -+ hc->xfer_buff, grxsts.b.bcnt); -+ -+ /* Update the HC fields for the next packet received. */ -+ hc->xfer_count += grxsts.b.bcnt; -+ hc->xfer_buff += grxsts.b.bcnt; -+ } -+ -+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: -+ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: -+ case DWC_GRXSTS_PKTSTS_CH_HALTED: -+ /* Handled in interrupt, just ignore data */ -+ break; -+ default: -+ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", -+ grxsts.b.pktsts); -+ break; -+ } -+ -+ return 1; -+} -+ -+/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More -+ * data packets may be written to the FIFO for OUT transfers. More requests -+ * may be written to the non-periodic request queue for IN transfers. This -+ * interrupt is enabled only in Slave mode. */ -+int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); -+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, -+ DWC_OTG_TRANSACTION_NON_PERIODIC); -+ return 1; -+} -+ -+/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data -+ * packets may be written to the FIFO for OUT transfers. More requests may be -+ * written to the periodic request queue for IN transfers. This interrupt is -+ * enabled only in Slave mode. */ -+int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); -+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, -+ DWC_OTG_TRANSACTION_PERIODIC); -+ return 1; -+} -+ -+/** There are multiple conditions that can cause a port interrupt. This function -+ * determines which interrupt conditions have occurred and handles them -+ * appropriately. */ -+int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ int retval = 0; -+ hprt0_data_t hprt0; -+ hprt0_data_t hprt0_modify; -+ -+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ -+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in -+ * GINTSTS */ -+ -+ hprt0_modify.b.prtena = 0; -+ hprt0_modify.b.prtconndet = 0; -+ hprt0_modify.b.prtenchng = 0; -+ hprt0_modify.b.prtovrcurrchng = 0; -+ -+ /* Port Connect Detected -+ * Set flag and clear if detected */ -+ if (dwc_otg_hcd->core_if->hibernation_suspend == 1) { -+ // Dont modify port status if we are in hibernation state -+ hprt0_modify.b.prtconndet = 1; -+ hprt0_modify.b.prtenchng = 1; -+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); -+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ return retval; -+ } -+ -+ if (hprt0.b.prtconndet) { -+ /** @todo - check if steps performed in 'else' block should be perfromed regardles adp */ -+ if (dwc_otg_hcd->core_if->adp_enable && -+ dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) { -+ DWC_PRINTF("PORT CONNECT DETECTED ----------------\n"); -+ DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer); -+ dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; -+ /* TODO - check if this is required, as -+ * host initialization was already performed -+ * after initial ADP probing -+ */ -+ /*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0; -+ dwc_otg_core_init(dwc_otg_hcd->core_if); -+ dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if); -+ cil_hcd_start(dwc_otg_hcd->core_if);*/ -+ } else { -+ -+ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " -+ "Port Connect Detected--\n", hprt0.d32); -+ dwc_otg_hcd->flags.b.port_connect_status_change = 1; -+ dwc_otg_hcd->flags.b.port_connect_status = 1; -+ hprt0_modify.b.prtconndet = 1; -+ -+ /* B-Device has connected, Delete the connection timer. */ -+ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer); -+ } -+ /* The Hub driver asserts a reset when it sees port connect -+ * status change flag */ -+ retval |= 1; -+ } -+ -+ /* Port Enable Changed -+ * Clear if detected - Set internal flag if disabled */ -+ if (hprt0.b.prtenchng) { -+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " -+ "Port Enable Changed--\n", hprt0.d32); -+ hprt0_modify.b.prtenchng = 1; -+ if (hprt0.b.prtena == 1) { -+ hfir_data_t hfir; -+ int do_reset = 0; -+ dwc_otg_core_params_t *params = -+ dwc_otg_hcd->core_if->core_params; -+ dwc_otg_core_global_regs_t *global_regs = -+ dwc_otg_hcd->core_if->core_global_regs; -+ dwc_otg_host_if_t *host_if = -+ dwc_otg_hcd->core_if->host_if; -+ -+ /* Every time when port enables calculate -+ * HFIR.FrInterval -+ */ -+ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir); -+ hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if); -+ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32); -+ -+ /* Check if we need to adjust the PHY clock speed for -+ * low power and adjust it */ -+ if (params->host_support_fs_ls_low_power) { -+ gusbcfg_data_t usbcfg; -+ -+ usbcfg.d32 = -+ DWC_READ_REG32(&global_regs->gusbcfg); -+ -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED -+ || hprt0.b.prtspd == -+ DWC_HPRT0_PRTSPD_FULL_SPEED) { -+ /* -+ * Low power -+ */ -+ hcfg_data_t hcfg; -+ if (usbcfg.b.phylpwrclksel == 0) { -+ /* Set PHY low power clock select for FS/LS devices */ -+ usbcfg.b.phylpwrclksel = 1; -+ DWC_WRITE_REG32 -+ (&global_regs->gusbcfg, -+ usbcfg.d32); -+ do_reset = 1; -+ } -+ -+ hcfg.d32 = -+ DWC_READ_REG32 -+ (&host_if->host_global_regs->hcfg); -+ -+ if (hprt0.b.prtspd == -+ DWC_HPRT0_PRTSPD_LOW_SPEED -+ && params->host_ls_low_power_phy_clk -+ == -+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) -+ { -+ /* 6 MHZ */ -+ DWC_DEBUGPL(DBG_CIL, -+ "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); -+ if (hcfg.b.fslspclksel != -+ DWC_HCFG_6_MHZ) { -+ hcfg.b.fslspclksel = -+ DWC_HCFG_6_MHZ; -+ DWC_WRITE_REG32 -+ (&host_if->host_global_regs->hcfg, -+ hcfg.d32); -+ do_reset = 1; -+ } -+ } else { -+ /* 48 MHZ */ -+ DWC_DEBUGPL(DBG_CIL, -+ "FS_PHY programming HCFG to 48 MHz ()\n"); -+ if (hcfg.b.fslspclksel != -+ DWC_HCFG_48_MHZ) { -+ hcfg.b.fslspclksel = -+ DWC_HCFG_48_MHZ; -+ DWC_WRITE_REG32 -+ (&host_if->host_global_regs->hcfg, -+ hcfg.d32); -+ do_reset = 1; -+ } -+ } -+ } else { -+ /* -+ * Not low power -+ */ -+ if (usbcfg.b.phylpwrclksel == 1) { -+ usbcfg.b.phylpwrclksel = 0; -+ DWC_WRITE_REG32 -+ (&global_regs->gusbcfg, -+ usbcfg.d32); -+ do_reset = 1; -+ } -+ } -+ -+ if (do_reset) { -+ DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet); -+ } -+ } -+ -+ if (!do_reset) { -+ /* Port has been enabled set the reset change flag */ -+ dwc_otg_hcd->flags.b.port_reset_change = 1; -+ } -+ } else { -+ dwc_otg_hcd->flags.b.port_enable_change = 1; -+ } -+ retval |= 1; -+ } -+ -+ /** Overcurrent Change Interrupt */ -+ if (hprt0.b.prtovrcurrchng) { -+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " -+ "Port Overcurrent Changed--\n", hprt0.d32); -+ dwc_otg_hcd->flags.b.port_over_current_change = 1; -+ hprt0_modify.b.prtovrcurrchng = 1; -+ retval |= 1; -+ } -+ -+ /* Clear Port Interrupts */ -+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); -+ -+ return retval; -+} -+ -+/** This interrupt indicates that one or more host channels has a pending -+ * interrupt. There are multiple conditions that can cause each host channel -+ * interrupt. This function determines which conditions have occurred for each -+ * host channel interrupt and handles them appropriately. */ -+int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ int i; -+ int retval = 0; -+ haint_data_t haint = { .d32 = 0 } ; -+ -+ /* Clear appropriate bits in HCINTn to clear the interrupt bit in -+ * GINTSTS */ -+ -+ if (!fiq_fsm_enable) -+ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); -+ -+ // Overwrite with saved interrupts from fiq handler -+ if(fiq_fsm_enable) -+ { -+ /* check the mask? */ -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock); -+ haint.b2.chint |= ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint); -+ dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint = ~0; -+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } -+ -+ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { -+ if (haint.b2.chint & (1 << i)) { -+ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); -+ } -+ } -+ -+ return retval; -+} -+ -+/** -+ * Gets the actual length of a transfer after the transfer halts. _halt_status -+ * holds the reason for the halt. -+ * -+ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, -+ * *short_read is set to 1 upon return if less than the requested -+ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon -+ * return. short_read may also be NULL on entry, in which case it remains -+ * unchanged. -+ */ -+static uint32_t get_actual_xfer_length(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status, -+ int *short_read) -+{ -+ hctsiz_data_t hctsiz; -+ uint32_t length; -+ -+ if (short_read != NULL) { -+ *short_read = 0; -+ } -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ -+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { -+ if (hc->ep_is_in) { -+ length = hc->xfer_len - hctsiz.b.xfersize; -+ if (short_read != NULL) { -+ *short_read = (hctsiz.b.xfersize != 0); -+ } -+ } else if (hc->qh->do_split) { -+ //length = split_out_xfersize[hc->hc_num]; -+ length = qtd->ssplit_out_xfer_count; -+ } else { -+ length = hc->xfer_len; -+ } -+ } else { -+ /* -+ * Must use the hctsiz.pktcnt field to determine how much data -+ * has been transferred. This field reflects the number of -+ * packets that have been transferred via the USB. This is -+ * always an integral number of packets if the transfer was -+ * halted before its normal completion. (Can't use the -+ * hctsiz.xfersize field because that reflects the number of -+ * bytes transferred via the AHB, not the USB). -+ */ -+ length = -+ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; -+ } -+ -+ return length; -+} -+ -+/** -+ * Updates the state of the URB after a Transfer Complete interrupt on the -+ * host channel. Updates the actual_length field of the URB based on the -+ * number of bytes transferred via the host channel. Sets the URB status -+ * if the data transfer is finished. -+ * -+ * @return 1 if the data transfer specified by the URB is completely finished, -+ * 0 otherwise. -+ */ -+static int update_urb_state_xfer_comp(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_hcd_urb_t * urb, -+ dwc_otg_qtd_t * qtd) -+{ -+ int xfer_done = 0; -+ int short_read = 0; -+ -+ int xfer_length; -+ -+ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_COMPLETE, -+ &short_read); -+ -+ if (urb->actual_length + xfer_length > urb->length) { -+ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", -+ hc->dev_addr, __func__, __LINE__); -+ xfer_length = urb->length - urb->actual_length; -+ } -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && xfer_length && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, -+ xfer_length); -+ } -+ -+ urb->actual_length += xfer_length; -+ -+ if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) && -+ (urb->flags & URB_SEND_ZERO_PACKET) -+ && (urb->actual_length == urb->length) -+ && !(urb->length % hc->max_packet)) { -+ xfer_done = 0; -+ } else if (short_read || urb->actual_length >= urb->length) { -+ xfer_done = 1; -+ urb->status = 0; -+ } -+ -+#ifdef DEBUG -+ { -+ hctsiz_data_t hctsiz; -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", -+ __func__, (hc->ep_is_in ? "IN" : "OUT"), -+ hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); -+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", -+ hctsiz.b.xfersize); -+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", -+ urb->length); -+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", -+ urb->actual_length); -+ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", -+ short_read, xfer_done); -+ } -+#endif -+ -+ return xfer_done; -+} -+ -+/* -+ * Save the starting data toggle for the next transfer. The data toggle is -+ * saved in the QH for non-control transfers and it's saved in the QTD for -+ * control transfers. -+ */ -+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd) -+{ -+ hctsiz_data_t hctsiz; -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ -+ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { -+ dwc_otg_qh_t *qh = hc->qh; -+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ } else { -+ qh->data_toggle = DWC_OTG_HC_PID_DATA1; -+ } -+ } else { -+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { -+ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; -+ } else { -+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; -+ } -+ } -+} -+ -+/** -+ * Updates the state of an Isochronous URB when the transfer is stopped for -+ * any reason. The fields of the current entry in the frame descriptor array -+ * are set based on the transfer state and the input _halt_status. Completes -+ * the Isochronous URB if all the URB frames have been completed. -+ * -+ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be -+ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. -+ */ -+static dwc_otg_halt_status_e -+update_isoc_urb_state(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) -+{ -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ dwc_otg_halt_status_e ret_val = halt_status; -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ -+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index]; -+ switch (halt_status) { -+ case DWC_OTG_HC_XFER_COMPLETE: -+ frame_desc->status = 0; -+ frame_desc->actual_length = -+ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, -+ hc->qh->dw_align_buf, frame_desc->actual_length); -+ } -+ -+ break; -+ case DWC_OTG_HC_XFER_FRAME_OVERRUN: -+ urb->error_count++; -+ if (hc->ep_is_in) { -+ frame_desc->status = -DWC_E_NO_STREAM_RES; -+ } else { -+ frame_desc->status = -DWC_E_COMMUNICATION; -+ } -+ frame_desc->actual_length = 0; -+ break; -+ case DWC_OTG_HC_XFER_BABBLE_ERR: -+ urb->error_count++; -+ frame_desc->status = -DWC_E_OVERFLOW; -+ /* Don't need to update actual_length in this case. */ -+ break; -+ case DWC_OTG_HC_XFER_XACT_ERR: -+ urb->error_count++; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ frame_desc->actual_length = -+ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL); -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset, -+ hc->qh->dw_align_buf, frame_desc->actual_length); -+ } -+ /* Skip whole frame */ -+ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && -+ hc->ep_is_in && hcd->core_if->dma_enable) { -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ } -+ -+ break; -+ default: -+ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status); -+ break; -+ } -+ if (++qtd->isoc_frame_index == urb->packet_count) { -+ /* -+ * urb->status is not used for isoc transfers. -+ * The individual frame_desc statuses are used instead. -+ */ -+ hcd->fops->complete(hcd, urb->priv, urb, 0); -+ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; -+ } else { -+ ret_val = DWC_OTG_HC_XFER_COMPLETE; -+ } -+ return ret_val; -+} -+ -+/** -+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic -+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are -+ * still linked to the QH, the QH is added to the end of the inactive -+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic -+ * schedule if no more QTDs are linked to the QH. -+ */ -+static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd) -+{ -+ int continue_split = 0; -+ dwc_otg_qtd_t *qtd; -+ -+ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); -+ -+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list); -+ -+ if (qtd->complete_split) { -+ continue_split = 1; -+ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || -+ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { -+ continue_split = 1; -+ } -+ -+ if (free_qtd) { -+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh); -+ continue_split = 0; -+ } -+ -+ qh->channel = NULL; -+ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); -+} -+ -+/** -+ * Releases a host channel for use by other transfers. Attempts to select and -+ * queue more transactions since at least one host channel is available. -+ * -+ * @param hcd The HCD state structure. -+ * @param hc The host channel to release. -+ * @param qtd The QTD associated with the host channel. This QTD may be freed -+ * if the transfer is complete or an error has occurred. -+ * @param halt_status Reason the channel is being released. This status -+ * determines the actions taken by this function. -+ */ -+static void release_channel(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ dwc_otg_transaction_type_e tr_type; -+ int free_qtd; -+ dwc_irqflags_t flags; -+ dwc_spinlock_t *channel_lock = hcd->channel_lock; -+ -+ int hog_port = 0; -+ -+ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n", -+ __func__, hc->hc_num, halt_status, hc->xfer_len); -+ -+ if(fiq_fsm_enable && hc->do_split) { -+ if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) { -+ if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID || -+ hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) { -+ hog_port = 0; -+ } -+ } -+ } -+ -+ switch (halt_status) { -+ case DWC_OTG_HC_XFER_URB_COMPLETE: -+ free_qtd = 1; -+ break; -+ case DWC_OTG_HC_XFER_AHB_ERR: -+ case DWC_OTG_HC_XFER_STALL: -+ case DWC_OTG_HC_XFER_BABBLE_ERR: -+ free_qtd = 1; -+ break; -+ case DWC_OTG_HC_XFER_XACT_ERR: -+ if (qtd->error_count >= 3) { -+ DWC_DEBUGPL(DBG_HCDV, -+ " Complete URB with transaction error\n"); -+ free_qtd = 1; -+ qtd->urb->status = -DWC_E_PROTOCOL; -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_PROTOCOL); -+ } else { -+ free_qtd = 0; -+ } -+ break; -+ case DWC_OTG_HC_XFER_URB_DEQUEUE: -+ /* -+ * The QTD has already been removed and the QH has been -+ * deactivated. Don't want to do anything except release the -+ * host channel and try to queue more transfers. -+ */ -+ goto cleanup; -+ case DWC_OTG_HC_XFER_NO_HALT_STATUS: -+ free_qtd = 0; -+ break; -+ case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE: -+ DWC_DEBUGPL(DBG_HCDV, -+ " Complete URB with I/O error\n"); -+ free_qtd = 1; -+ qtd->urb->status = -DWC_E_IO; -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_IO); -+ break; -+ default: -+ free_qtd = 0; -+ break; -+ } -+ -+ deactivate_qh(hcd, hc->qh, free_qtd); -+ -+cleanup: -+ /* -+ * Release the host channel for use by other transfers. The cleanup -+ * function clears the channel interrupt enables and conditions, so -+ * there's no need to clear the Channel Halted interrupt separately. -+ */ -+ if (fiq_fsm_enable && hcd->fiq_state->channel[hc->hc_num].fsm != FIQ_PASSTHROUGH) -+ dwc_otg_cleanup_fiq_channel(hcd, hc->hc_num); -+ dwc_otg_hc_cleanup(hcd->core_if, hc); -+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry); -+ -+ if (!microframe_schedule) { -+ switch (hc->ep_type) { -+ case DWC_OTG_EP_TYPE_CONTROL: -+ case DWC_OTG_EP_TYPE_BULK: -+ hcd->non_periodic_channels--; -+ break; -+ -+ default: -+ /* -+ * Don't release reservations for periodic channels here. -+ * That's done when a periodic transfer is descheduled (i.e. -+ * when the QH is removed from the periodic schedule). -+ */ -+ break; -+ } -+ } else { -+ -+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags); -+ hcd->available_host_channels++; -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "AHC = %d ", hcd->available_host_channels); -+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags); -+ } -+ -+ /* Try to queue more transfers now that there's a free channel. */ -+ tr_type = dwc_otg_hcd_select_transactions(hcd); -+ if (tr_type != DWC_OTG_TRANSACTION_NONE) { -+ dwc_otg_hcd_queue_transactions(hcd, tr_type); -+ } -+} -+ -+/** -+ * Halts a host channel. If the channel cannot be halted immediately because -+ * the request queue is full, this function ensures that the FIFO empty -+ * interrupt for the appropriate queue is enabled so that the halt request can -+ * be queued when there is space in the request queue. -+ * -+ * This function may also be called in DMA mode. In that case, the channel is -+ * simply released since the core always halts the channel automatically in -+ * DMA mode. -+ */ -+static void halt_channel(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status) -+{ -+ if (hcd->core_if->dma_enable) { -+ release_channel(hcd, hc, qtd, halt_status); -+ return; -+ } -+ -+ /* Slave mode processing... */ -+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); -+ -+ if (hc->halt_on_queue) { -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ dwc_otg_core_global_regs_t *global_regs; -+ global_regs = hcd->core_if->core_global_regs; -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || -+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { -+ /* -+ * Make sure the Non-periodic Tx FIFO empty interrupt -+ * is enabled so that the non-periodic schedule will -+ * be processed. -+ */ -+ gintmsk.b.nptxfempty = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ } -+ } else { -+ /* -+ * Move the QH from the periodic queued schedule to -+ * the periodic assigned schedule. This allows the -+ * halt to be queued when the periodic schedule is -+ * processed. -+ */ -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned, -+ &hc->qh->qh_list_entry); -+ -+ /* -+ * Make sure the Periodic Tx FIFO Empty interrupt is -+ * enabled so that the periodic schedule will be -+ * processed. -+ */ -+ gintmsk.b.ptxfempty = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32); -+ } -+ } -+ } -+} -+ -+/** -+ * Performs common cleanup for non-periodic transfers after a Transfer -+ * Complete interrupt. This function should be called after any endpoint type -+ * specific handling is finished to release the host channel. -+ */ -+static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ hcint_data_t hcint; -+ -+ qtd->error_count = 0; -+ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ if (hcint.b.nyet) { -+ /* -+ * Got a NYET on the last transaction of the transfer. This -+ * means that the endpoint should be in the PING state at the -+ * beginning of the next transfer. -+ */ -+ hc->qh->ping_state = 1; -+ clear_hc_int(hc_regs, nyet); -+ } -+ -+ /* -+ * Always halt and release the host channel to make it available for -+ * more transfers. There may still be more phases for a control -+ * transfer or more data packets for a bulk transfer at this point, -+ * but the host channel is still halted. A channel will be reassigned -+ * to the transfer when the non-periodic schedule is processed after -+ * the channel is released. This allows transactions to be queued -+ * properly via dwc_otg_hcd_queue_transactions, which also enables the -+ * Tx FIFO Empty interrupt if necessary. -+ */ -+ if (hc->ep_is_in) { -+ /* -+ * IN transfers in Slave mode require an explicit disable to -+ * halt the channel. (In DMA mode, this call simply releases -+ * the channel.) -+ */ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } else { -+ /* -+ * The channel is automatically disabled by the core for OUT -+ * transfers in Slave mode. -+ */ -+ release_channel(hcd, hc, qtd, halt_status); -+ } -+} -+ -+/** -+ * Performs common cleanup for periodic transfers after a Transfer Complete -+ * interrupt. This function should be called after any endpoint type specific -+ * handling is finished to release the host channel. -+ */ -+static void complete_periodic_xfer(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ hctsiz_data_t hctsiz; -+ qtd->error_count = 0; -+ -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { -+ /* Core halts channel in these cases. */ -+ release_channel(hcd, hc, qtd, halt_status); -+ } else { -+ /* Flush any outstanding requests from the Tx queue. */ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+} -+ -+static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ uint32_t len; -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc; -+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ -+ len = get_actual_xfer_length(hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_COMPLETE, NULL); -+ -+ if (!len) { -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ return 0; -+ } -+ frame_desc->actual_length += len; -+ -+ if (hc->align_buff && len) -+ dwc_memcpy(qtd->urb->buf + frame_desc->offset + -+ qtd->isoc_split_offset, hc->qh->dw_align_buf, len); -+ qtd->isoc_split_offset += len; -+ -+ if (frame_desc->length == frame_desc->actual_length) { -+ frame_desc->status = 0; -+ qtd->isoc_frame_index++; -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ } -+ -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ -+ return 1; /* Indicates that channel released */ -+} -+ -+/** -+ * Handles a host channel Transfer Complete interrupt. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ int urb_xfer_done; -+ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -+ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Transfer Complete--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status); -+ if (pipe_type == UE_ISOCHRONOUS) { -+ /* Do not disable the interrupt, just clear it */ -+ clear_hc_int(hc_regs, xfercomp); -+ return 1; -+ } -+ goto handle_xfercomp_done; -+ } -+ -+ /* -+ * Handle xfer complete on CSPLIT. -+ */ -+ -+ if (hc->qh->do_split) { -+ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in -+ && hcd->core_if->dma_enable) { -+ if (qtd->complete_split -+ && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs, -+ qtd)) -+ goto handle_xfercomp_done; -+ } else { -+ qtd->complete_split = 0; -+ } -+ } -+ -+ /* Update the QTD and URB states. */ -+ switch (pipe_type) { -+ case UE_CONTROL: -+ switch (qtd->control_phase) { -+ case DWC_OTG_CONTROL_SETUP: -+ if (urb->length > 0) { -+ qtd->control_phase = DWC_OTG_CONTROL_DATA; -+ } else { -+ qtd->control_phase = DWC_OTG_CONTROL_STATUS; -+ } -+ DWC_DEBUGPL(DBG_HCDV, -+ " Control setup transaction done\n"); -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ break; -+ case DWC_OTG_CONTROL_DATA:{ -+ urb_xfer_done = -+ update_urb_state_xfer_comp(hc, hc_regs, urb, -+ qtd); -+ if (urb_xfer_done) { -+ qtd->control_phase = -+ DWC_OTG_CONTROL_STATUS; -+ DWC_DEBUGPL(DBG_HCDV, -+ " Control data transfer done\n"); -+ } else { -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ } -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ break; -+ } -+ case DWC_OTG_CONTROL_STATUS: -+ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); -+ if (urb->status == -DWC_E_IN_PROGRESS) { -+ urb->status = 0; -+ } -+ hcd->fops->complete(hcd, urb->priv, urb, urb->status); -+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; -+ break; -+ } -+ -+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ case UE_BULK: -+ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); -+ urb_xfer_done = -+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); -+ if (urb_xfer_done) { -+ hcd->fops->complete(hcd, urb->priv, urb, urb->status); -+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; -+ } else { -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ } -+ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ case UE_INTERRUPT: -+ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); -+ urb_xfer_done = -+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); -+ -+ /* -+ * Interrupt URB is done on the first transfer complete -+ * interrupt. -+ */ -+ if (urb_xfer_done) { -+ hcd->fops->complete(hcd, urb->priv, urb, urb->status); -+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; -+ } else { -+ halt_status = DWC_OTG_HC_XFER_COMPLETE; -+ } -+ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ case UE_ISOCHRONOUS: -+ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); -+ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { -+ halt_status = -+ update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_COMPLETE); -+ } -+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); -+ break; -+ } -+ -+handle_xfercomp_done: -+ disable_hc_int(hc_regs, xfercompl); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel STALL interrupt. This handler may be called in -+ * either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -+ -+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " -+ "STALL Received--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL); -+ goto handle_stall_done; -+ } -+ -+ if (pipe_type == UE_CONTROL) { -+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); -+ } -+ -+ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) { -+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE); -+ /* -+ * USB protocol requires resetting the data toggle for bulk -+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) -+ * setup command is issued to the endpoint. Anticipate the -+ * CLEAR_FEATURE command since a STALL has occurred and reset -+ * the data toggle now. -+ */ -+ hc->qh->data_toggle = 0; -+ } -+ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); -+ -+handle_stall_done: -+ disable_hc_int(hc_regs, stall); -+ -+ return 1; -+} -+ -+/* -+ * Updates the state of the URB when a transfer has been stopped due to an -+ * abnormal condition before the transfer completes. Modifies the -+ * actual_length field of the URB to reflect the number of bytes that have -+ * actually been transferred via the host channel. -+ */ -+static void update_urb_state_xfer_intr(dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_hcd_urb_t * urb, -+ dwc_otg_qtd_t * qtd, -+ dwc_otg_halt_status_e halt_status) -+{ -+ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, -+ halt_status, NULL); -+ -+ if (urb->actual_length + bytes_transferred > urb->length) { -+ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n", -+ hc->dev_addr, __func__, __LINE__); -+ bytes_transferred = urb->length - urb->actual_length; -+ } -+ -+ /* non DWORD-aligned buffer case handling. */ -+ if (hc->align_buff && bytes_transferred && hc->ep_is_in) { -+ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf, -+ bytes_transferred); -+ } -+ -+ urb->actual_length += bytes_transferred; -+ -+#ifdef DEBUG -+ { -+ hctsiz_data_t hctsiz; -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", -+ __func__, (hc->ep_is_in ? "IN" : "OUT"), -+ hc->hc_num); -+ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", -+ hc->start_pkt_count); -+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); -+ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); -+ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", -+ bytes_transferred); -+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", -+ urb->actual_length); -+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", -+ urb->length); -+ } -+#endif -+} -+ -+/** -+ * Handles a host channel NAK interrupt. This handler may be called in either -+ * DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "NAK Received--\n", hc->hc_num); -+ -+ /* -+ * When we get bulk NAKs then remember this so we holdoff on this qh until -+ * the beginning of the next frame -+ */ -+ switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_BULK: -+ case UE_CONTROL: -+ if (nak_holdoff && qtd->qh->do_split) -+ hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd); -+ } -+ -+ /* -+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and -+ * interrupt. Re-start the SSPLIT transfer. -+ */ -+ if (hc->do_split) { -+ if (hc->complete_split) { -+ qtd->error_count = 0; -+ } -+ qtd->complete_split = 0; -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); -+ goto handle_nak_done; -+ } -+ -+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_CONTROL: -+ case UE_BULK: -+ if (hcd->core_if->dma_enable && hc->ep_is_in) { -+ /* -+ * NAK interrupts are enabled on bulk/control IN -+ * transfers in DMA mode for the sole purpose of -+ * resetting the error count after a transaction error -+ * occurs. The core will continue transferring data. -+ * Disable other interrupts unmasked for the same -+ * reason. -+ */ -+ disable_hc_int(hc_regs, datatglerr); -+ disable_hc_int(hc_regs, ack); -+ qtd->error_count = 0; -+ goto handle_nak_done; -+ } -+ -+ /* -+ * NAK interrupts normally occur during OUT transfers in DMA -+ * or Slave mode. For IN transfers, more requests will be -+ * queued as request queue space is available. -+ */ -+ qtd->error_count = 0; -+ -+ if (!hc->qh->ping_state) { -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, -+ DWC_OTG_HC_XFER_NAK); -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ -+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) -+ hc->qh->ping_state = 1; -+ } -+ -+ /* -+ * Halt the channel so the transfer can be re-started from -+ * the appropriate point or the PING protocol will -+ * start/continue. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); -+ break; -+ case UE_INTERRUPT: -+ qtd->error_count = 0; -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); -+ break; -+ case UE_ISOCHRONOUS: -+ /* Should never get called for isochronous transfers. */ -+ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n"); -+ break; -+ } -+ -+handle_nak_done: -+ disable_hc_int(hc_regs, nak); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel ACK interrupt. This interrupt is enabled when -+ * performing the PING protocol in Slave mode, when errors occur during -+ * either Slave mode or DMA mode, and during Start Split transactions. -+ */ -+static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "ACK Received--\n", hc->hc_num); -+ -+ if (hc->do_split) { -+ /* -+ * Handle ACK on SSPLIT. -+ * ACK should not occur in CSPLIT. -+ */ -+ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { -+ qtd->ssplit_out_xfer_count = hc->xfer_len; -+ } -+ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { -+ /* Don't need complete for isochronous out transfers. */ -+ qtd->complete_split = 1; -+ } -+ -+ /* ISOC OUT */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { -+ switch (hc->xact_pos) { -+ case DWC_HCSPLIT_XACTPOS_ALL: -+ break; -+ case DWC_HCSPLIT_XACTPOS_END: -+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; -+ qtd->isoc_split_offset = 0; -+ break; -+ case DWC_HCSPLIT_XACTPOS_BEGIN: -+ case DWC_HCSPLIT_XACTPOS_MID: -+ /* -+ * For BEGIN or MID, calculate the length for -+ * the next microframe to determine the correct -+ * SSPLIT token, either MID or END. -+ */ -+ { -+ struct dwc_otg_hcd_iso_packet_desc -+ *frame_desc; -+ -+ frame_desc = -+ &qtd->urb-> -+ iso_descs[qtd->isoc_frame_index]; -+ qtd->isoc_split_offset += 188; -+ -+ if ((frame_desc->length - -+ qtd->isoc_split_offset) <= 188) { -+ qtd->isoc_split_pos = -+ DWC_HCSPLIT_XACTPOS_END; -+ } else { -+ qtd->isoc_split_pos = -+ DWC_HCSPLIT_XACTPOS_MID; -+ } -+ -+ } -+ break; -+ } -+ } else { -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); -+ } -+ } else { -+ /* -+ * An unmasked ACK on a non-split DMA transaction is -+ * for the sole purpose of resetting error counts. Disable other -+ * interrupts unmasked for the same reason. -+ */ -+ if(hcd->core_if->dma_enable) { -+ disable_hc_int(hc_regs, datatglerr); -+ disable_hc_int(hc_regs, nak); -+ } -+ qtd->error_count = 0; -+ -+ if (hc->qh->ping_state) { -+ hc->qh->ping_state = 0; -+ /* -+ * Halt the channel so the transfer can be re-started -+ * from the appropriate point. This only happens in -+ * Slave mode. In DMA mode, the ping_state is cleared -+ * when the transfer is started because the core -+ * automatically executes the PING, then the transfer. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); -+ } -+ } -+ -+ /* -+ * If the ACK occurred when _not_ in the PING state, let the channel -+ * continue transferring data after clearing the error count. -+ */ -+ -+ disable_hc_int(hc_regs, ack); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel NYET interrupt. This interrupt should only occur on -+ * Bulk and Control OUT endpoints and for complete split transactions. If a -+ * NYET occurs at the same time as a Transfer Complete interrupt, it is -+ * handled in the xfercomp interrupt handler, not here. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "NYET Received--\n", hc->hc_num); -+ -+ /* -+ * NYET on CSPLIT -+ * re-do the CSPLIT immediately on non-periodic -+ */ -+ if (hc->do_split && hc->complete_split) { -+ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) -+ && hcd->core_if->dma_enable) { -+ qtd->complete_split = 0; -+ qtd->isoc_split_offset = 0; -+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } -+ else -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ goto handle_nyet_done; -+ } -+ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ int frnum = dwc_otg_hcd_get_frame_number(hcd); -+ -+ // With the FIQ running we only ever see the failed NYET -+ if (dwc_full_frame_num(frnum) != -+ dwc_full_frame_num(hc->qh->sched_frame) || -+ fiq_fsm_enable) { -+ /* -+ * No longer in the same full speed frame. -+ * Treat this as a transaction error. -+ */ -+#if 0 -+ /** @todo Fix system performance so this can -+ * be treated as an error. Right now complete -+ * splits cannot be scheduled precisely enough -+ * due to other system activity, so this error -+ * occurs regularly in Slave mode. -+ */ -+ qtd->error_count++; -+#endif -+ qtd->complete_split = 0; -+ halt_channel(hcd, hc, qtd, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ /** @todo add support for isoc release */ -+ goto handle_nyet_done; -+ } -+ } -+ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); -+ goto handle_nyet_done; -+ } -+ -+ hc->qh->ping_state = 1; -+ qtd->error_count = 0; -+ -+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, -+ DWC_OTG_HC_XFER_NYET); -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ -+ /* -+ * Halt the channel and re-start the transfer so the PING -+ * protocol will start. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); -+ -+handle_nyet_done: -+ disable_hc_int(hc_regs, nyet); -+ return 1; -+} -+ -+/** -+ * Handles a host channel babble interrupt. This handler may be called in -+ * either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Babble Error--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ DWC_OTG_HC_XFER_BABBLE_ERR); -+ goto handle_babble_done; -+ } -+ -+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { -+ hcd->fops->complete(hcd, qtd->urb->priv, -+ qtd->urb, -DWC_E_OVERFLOW); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); -+ } else { -+ dwc_otg_halt_status_e halt_status; -+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_BABBLE_ERR); -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+ -+handle_babble_done: -+ disable_hc_int(hc_regs, bblerr); -+ return 1; -+} -+ -+/** -+ * Handles a host channel AHB error interrupt. This handler is only called in -+ * DMA mode. -+ */ -+static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ hcchar_data_t hcchar; -+ hcsplt_data_t hcsplt; -+ hctsiz_data_t hctsiz; -+ uint32_t hcdma; -+ char *pipetype, *speed; -+ -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "AHB Error--\n", hc->hc_num); -+ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ hcdma = DWC_READ_REG32(&hc_regs->hcdma); -+ -+ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); -+ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); -+ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); -+ DWC_ERROR(" Device address: %d\n", -+ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); -+ DWC_ERROR(" Endpoint: %d, %s\n", -+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), -+ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT")); -+ -+ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) { -+ case UE_CONTROL: -+ pipetype = "CONTROL"; -+ break; -+ case UE_BULK: -+ pipetype = "BULK"; -+ break; -+ case UE_INTERRUPT: -+ pipetype = "INTERRUPT"; -+ break; -+ case UE_ISOCHRONOUS: -+ pipetype = "ISOCHRONOUS"; -+ break; -+ default: -+ pipetype = "UNKNOWN"; -+ break; -+ } -+ -+ DWC_ERROR(" Endpoint type: %s\n", pipetype); -+ -+ switch (hc->speed) { -+ case DWC_OTG_EP_SPEED_HIGH: -+ speed = "HIGH"; -+ break; -+ case DWC_OTG_EP_SPEED_FULL: -+ speed = "FULL"; -+ break; -+ case DWC_OTG_EP_SPEED_LOW: -+ speed = "LOW"; -+ break; -+ default: -+ speed = "UNKNOWN"; -+ break; -+ }; -+ -+ DWC_ERROR(" Speed: %s\n", speed); -+ -+ DWC_ERROR(" Max packet size: %d\n", -+ dwc_otg_hcd_get_mps(&urb->pipe_info)); -+ DWC_ERROR(" Data buffer length: %d\n", urb->length); -+ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", -+ urb->buf, (void *)urb->dma); -+ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", -+ urb->setup_packet, (void *)urb->setup_dma); -+ DWC_ERROR(" Interval: %d\n", urb->interval); -+ -+ /* Core haltes the channel for Descriptor DMA mode */ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ DWC_OTG_HC_XFER_AHB_ERR); -+ goto handle_ahberr_done; -+ } -+ -+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO); -+ -+ /* -+ * Force a channel halt. Don't call halt_channel because that won't -+ * write to the HCCHARn register in DMA mode to force the halt. -+ */ -+ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); -+handle_ahberr_done: -+ disable_hc_int(hc_regs, ahberr); -+ return 1; -+} -+ -+/** -+ * Handles a host channel transaction error interrupt. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Transaction Error--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ goto handle_xacterr_done; -+ } -+ -+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_CONTROL: -+ case UE_BULK: -+ qtd->error_count++; -+ if (!hc->qh->ping_state) { -+ -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) { -+ hc->qh->ping_state = 1; -+ } -+ } -+ -+ /* -+ * Halt the channel so the transfer can be re-started from -+ * the appropriate point or the PING protocol will start. -+ */ -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ break; -+ case UE_INTERRUPT: -+ qtd->error_count++; -+ if (hc->do_split && hc->complete_split) { -+ qtd->complete_split = 0; -+ } -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ break; -+ case UE_ISOCHRONOUS: -+ { -+ dwc_otg_halt_status_e halt_status; -+ halt_status = -+ update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_XACT_ERR); -+ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+ break; -+ } -+handle_xacterr_done: -+ disable_hc_int(hc_regs, xacterr); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel frame overrun interrupt. This handler may be called -+ * in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Frame Overrun--\n", hc->hc_num); -+ -+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) { -+ case UE_CONTROL: -+ case UE_BULK: -+ break; -+ case UE_INTERRUPT: -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); -+ break; -+ case UE_ISOCHRONOUS: -+ { -+ dwc_otg_halt_status_e halt_status; -+ halt_status = -+ update_isoc_urb_state(hcd, hc, hc_regs, qtd, -+ DWC_OTG_HC_XFER_FRAME_OVERRUN); -+ -+ halt_channel(hcd, hc, qtd, halt_status); -+ } -+ break; -+ } -+ -+ disable_hc_int(hc_regs, frmovrun); -+ -+ return 1; -+} -+ -+/** -+ * Handles a host channel data toggle error interrupt. This handler may be -+ * called in either DMA mode or Slave mode. -+ */ -+static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Data Toggle Error on %s transfer--\n", -+ hc->hc_num, (hc->ep_is_in ? "IN" : "OUT")); -+ -+ /* Data toggles on split transactions cause the hc to halt. -+ * restart transfer */ -+ if(hc->qh->do_split) -+ { -+ qtd->error_count++; -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ } else if (hc->ep_is_in) { -+ /* An unmasked data toggle error on a non-split DMA transaction is -+ * for the sole purpose of resetting error counts. Disable other -+ * interrupts unmasked for the same reason. -+ */ -+ if(hcd->core_if->dma_enable) { -+ disable_hc_int(hc_regs, ack); -+ disable_hc_int(hc_regs, nak); -+ } -+ qtd->error_count = 0; -+ } -+ -+ disable_hc_int(hc_regs, datatglerr); -+ -+ return 1; -+} -+ -+#ifdef DEBUG -+/** -+ * This function is for debug only. It checks that a valid halt status is set -+ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is -+ * taken and a warning is issued. -+ * @return 1 if halt status is ok, 0 otherwise. -+ */ -+static inline int halt_status_ok(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ hcchar_data_t hcchar; -+ hctsiz_data_t hctsiz; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ hcsplt_data_t hcsplt; -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { -+ /* -+ * This code is here only as a check. This condition should -+ * never happen. Ignore the halt if it does occur. -+ */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz); -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); -+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt); -+ DWC_WARN -+ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, " -+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " -+ "hcint 0x%08x, hcintmsk 0x%08x, " -+ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__, -+ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32, -+ hcintmsk.d32, hcsplt.d32, qtd->complete_split); -+ -+ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", -+ __func__, hc->hc_num); -+ DWC_WARN("\n"); -+ clear_hc_int(hc_regs, chhltd); -+ return 0; -+ } -+ -+ /* -+ * This code is here only as a check. hcchar.chdis should -+ * never be set when the halt interrupt occurs. Halt the -+ * channel again if it does occur. -+ */ -+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar); -+ if (hcchar.b.chdis) { -+ DWC_WARN("%s: hcchar.chdis set unexpectedly, " -+ "hcchar 0x%08x, trying to halt again\n", -+ __func__, hcchar.d32); -+ clear_hc_int(hc_regs, chhltd); -+ hc->halt_pending = 0; -+ halt_channel(hcd, hc, qtd, hc->halt_status); -+ return 0; -+ } -+ -+ return 1; -+} -+#endif -+ -+/** -+ * Handles a host Channel Halted interrupt in DMA mode. This handler -+ * determines the reason the channel halted and proceeds accordingly. -+ */ -+static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ int out_nak_enh = 0; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ /* For core with OUT NAK enhancement, the flow for high- -+ * speed CONTROL/BULK OUT is handled a little differently. -+ */ -+ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) { -+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && -+ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || -+ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { -+ out_nak_enh = 1; -+ } -+ } -+ -+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || -+ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR -+ && !hcd->core_if->dma_desc_enable)) { -+ /* -+ * Just release the channel. A dequeue can happen on a -+ * transfer timeout. In the case of an AHB Error, the channel -+ * was forced to halt because there's no way to gracefully -+ * recover. -+ */ -+ if (hcd->core_if->dma_desc_enable) -+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, -+ hc->halt_status); -+ else -+ release_channel(hcd, hc, qtd, hc->halt_status); -+ return; -+ } -+ -+ /* Read the HCINTn register to determine the cause for the halt. */ -+ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); -+ -+ if (hcint.b.xfercomp) { -+ /** @todo This is here because of a possible hardware bug. Spec -+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT -+ * interrupt w/ACK bit set should occur, but I only see the -+ * XFERCOMP bit, even with it masked out. This is a workaround -+ * for that behavior. Should fix this when hardware is fixed. -+ */ -+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { -+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); -+ } -+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.stall) { -+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) { -+ if (out_nak_enh) { -+ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { -+ DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n"); -+ qtd->error_count = 0; -+ } else { -+ DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n"); -+ } -+ } -+ -+ /* -+ * Must handle xacterr before nak or ack. Could get a xacterr -+ * at the same time as either of these on a BULK/CONTROL OUT -+ * that started with a PING. The xacterr takes precedence. -+ */ -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) { -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) { -+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.bblerr) { -+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.frmovrun) { -+ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.datatglerr) { -+ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); -+ } else if (!out_nak_enh) { -+ if (hcint.b.nyet) { -+ /* -+ * Must handle nyet before nak or ack. Could get a nyet at the -+ * same time as either of those on a BULK/CONTROL OUT that -+ * started with a PING. The nyet takes precedence. -+ */ -+ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.nak && !hcintmsk.b.nak) { -+ /* -+ * If nak is not masked, it's because a non-split IN transfer -+ * is in an error state. In that case, the nak is handled by -+ * the nak interrupt handler, not here. Handle nak here for -+ * BULK/CONTROL OUT transfers, which halt on a NAK to allow -+ * rewinding the buffer pointer. -+ */ -+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ack && !hcintmsk.b.ack) { -+ /* -+ * If ack is not masked, it's because a non-split IN transfer -+ * is in an error state. In that case, the ack is handled by -+ * the ack interrupt handler, not here. Handle ack here for -+ * split transfers. Start splits halt on ACK. -+ */ -+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || -+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * A periodic transfer halted with no other channel -+ * interrupts set. Assume it was halted by the core -+ * because it could not be completed in its scheduled -+ * (micro)frame. -+ */ -+#ifdef DEBUG -+ DWC_PRINTF -+ ("%s: Halt channel %d (assume incomplete periodic transfer)\n", -+ __func__, hc->hc_num); -+#endif -+ halt_channel(hcd, hc, qtd, -+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); -+ } else { -+ DWC_ERROR -+ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason " -+ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", -+ __func__, hc->hc_num, hcint.d32, -+ DWC_READ_REG32(&hcd-> -+ core_if->core_global_regs-> -+ gintsts)); -+ /* Failthrough: use 3-strikes rule */ -+ qtd->error_count++; -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ } -+ -+ } -+ } else { -+ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n", -+ hcint.d32); -+ /* Failthrough: use 3-strikes rule */ -+ qtd->error_count++; -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ update_urb_state_xfer_intr(hc, hc_regs, -+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); -+ } -+} -+ -+/** -+ * Handles a host channel Channel Halted interrupt. -+ * -+ * In slave mode, this handler is called only when the driver specifically -+ * requests a halt. This occurs during handling other host channel interrupts -+ * (e.g. nak, xacterr, stall, nyet, etc.). -+ * -+ * In DMA mode, this is the interrupt that occurs when the core has finished -+ * processing a transfer on a channel. Other host channel interrupts (except -+ * ahberr) are disabled in DMA mode. -+ */ -+static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd, -+ dwc_hc_t * hc, -+ dwc_otg_hc_regs_t * hc_regs, -+ dwc_otg_qtd_t * qtd) -+{ -+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: " -+ "Channel Halted--\n", hc->hc_num); -+ -+ if (hcd->core_if->dma_enable) { -+ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); -+ } else { -+#ifdef DEBUG -+ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { -+ return 1; -+ } -+#endif -+ release_channel(hcd, hc, qtd, hc->halt_status); -+ } -+ -+ return 1; -+} -+ -+ -+/** -+ * dwc_otg_fiq_unmangle_isoc() - Update the iso_frame_desc structure on -+ * FIQ transfer completion -+ * @hcd: Pointer to dwc_otg_hcd struct -+ * @num: Host channel number -+ * -+ * 1. Un-mangle the status as recorded in each iso_frame_desc status -+ * 2. Copy it from the dwc_otg_urb into the real URB -+ */ -+void dwc_otg_fiq_unmangle_isoc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) -+{ -+ struct dwc_otg_hcd_urb *dwc_urb = qtd->urb; -+ int nr_frames = dwc_urb->packet_count; -+ int i; -+ hcint_data_t frame_hcint; -+ -+ for (i = 0; i < nr_frames; i++) { -+ frame_hcint.d32 = dwc_urb->iso_descs[i].status; -+ if (frame_hcint.b.xfercomp) { -+ dwc_urb->iso_descs[i].status = 0; -+ dwc_urb->actual_length += dwc_urb->iso_descs[i].actual_length; -+ } else if (frame_hcint.b.frmovrun) { -+ if (qh->ep_is_in) -+ dwc_urb->iso_descs[i].status = -DWC_E_NO_STREAM_RES; -+ else -+ dwc_urb->iso_descs[i].status = -DWC_E_COMMUNICATION; -+ dwc_urb->error_count++; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ } else if (frame_hcint.b.xacterr) { -+ dwc_urb->iso_descs[i].status = -DWC_E_PROTOCOL; -+ dwc_urb->error_count++; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ } else if (frame_hcint.b.bblerr) { -+ dwc_urb->iso_descs[i].status = -DWC_E_OVERFLOW; -+ dwc_urb->error_count++; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ } else { -+ /* Something went wrong */ -+ dwc_urb->iso_descs[i].status = -1; -+ dwc_urb->iso_descs[i].actual_length = 0; -+ dwc_urb->error_count++; -+ } -+ } -+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval * (nr_frames - 1)); -+ -+ //printk_ratelimited(KERN_INFO "%s: HS isochronous of %d/%d frames with %d errors complete\n", -+ // __FUNCTION__, i, dwc_urb->packet_count, dwc_urb->error_count); -+} -+ -+/** -+ * dwc_otg_fiq_unsetup_per_dma() - Remove data from bounce buffers for split transactions -+ * @hcd: Pointer to dwc_otg_hcd struct -+ * @num: Host channel number -+ * -+ * Copies data from the FIQ bounce buffers into the URB's transfer buffer. Does not modify URB state. -+ * Returns total length of data or -1 if the buffers were not used. -+ * -+ */ -+int dwc_otg_fiq_unsetup_per_dma(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num) -+{ -+ dwc_hc_t *hc = qh->channel; -+ struct fiq_dma_blob *blob = hcd->fiq_dmab; -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; -+ uint8_t *ptr = NULL; -+ int index = 0, len = 0; -+ int i = 0; -+ if (hc->ep_is_in) { -+ /* Copy data out of the DMA bounce buffers to the URB's buffer. -+ * The align_buf is ignored as this is ignored on FSM enqueue. */ -+ ptr = qtd->urb->buf; -+ if (qh->ep_type == UE_ISOCHRONOUS) { -+ /* Isoc IN transactions - grab the offset of the iso_frame_desc into the URB transfer buffer */ -+ index = qtd->isoc_frame_index; -+ ptr += qtd->urb->iso_descs[index].offset; -+ } else { -+ /* Need to increment by actual_length for interrupt IN */ -+ ptr += qtd->urb->actual_length; -+ } -+ -+ for (i = 0; i < st->dma_info.index; i++) { -+ len += st->dma_info.slot_len[i]; -+ dwc_memcpy(ptr, &blob->channel[num].index[i].buf[0], st->dma_info.slot_len[i]); -+ ptr += st->dma_info.slot_len[i]; -+ } -+ return len; -+ } else { -+ /* OUT endpoints - nothing to do. */ -+ return -1; -+ } -+ -+} -+/** -+ * dwc_otg_hcd_handle_hc_fsm() - handle an unmasked channel interrupt -+ * from a channel handled in the FIQ -+ * @hcd: Pointer to dwc_otg_hcd struct -+ * @num: Host channel number -+ * -+ * If a host channel interrupt was received by the IRQ and this was a channel -+ * used by the FIQ, the execution flow for transfer completion is substantially -+ * different from the normal (messy) path. This function and its friends handles -+ * channel cleanup and transaction completion from a FIQ transaction. -+ */ -+void dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd_t *hcd, uint32_t num) -+{ -+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num]; -+ dwc_hc_t *hc = hcd->hc_ptr_array[num]; -+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); -+ dwc_otg_qh_t *qh = hc->qh; -+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[num]; -+ hcint_data_t hcint = hcd->fiq_state->channel[num].hcint_copy; -+ int hostchannels = 0; -+ fiq_print(FIQDBG_INT, hcd->fiq_state, "OUT %01d %01d ", num , st->fsm); -+ -+ hostchannels = hcd->available_host_channels; -+ switch (st->fsm) { -+ case FIQ_TEST: -+ break; -+ -+ case FIQ_DEQUEUE_ISSUED: -+ /* hc_halt was called. QTD no longer exists. */ -+ /* TODO: for a nonperiodic split transaction, need to issue a -+ * CLEAR_TT_BUFFER hub command if we were in the start-split phase. -+ */ -+ release_channel(hcd, hc, NULL, hc->halt_status); -+ break; -+ -+ case FIQ_NP_SPLIT_DONE: -+ /* Nonperiodic transaction complete. */ -+ if (!hc->ep_is_in) { -+ qtd->ssplit_out_xfer_count = hc->xfer_len; -+ } -+ if (hcint.b.xfercomp) { -+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.nak) { -+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); -+ } -+ break; -+ -+ case FIQ_NP_SPLIT_HS_ABORTED: -+ /* A HS abort is a 3-strikes on the HS bus at any point in the transaction. -+ * Normally a CLEAR_TT_BUFFER hub command would be required: we can't do that -+ * because there's no guarantee which order a non-periodic split happened in. -+ * We could end up clearing a perfectly good transaction out of the buffer. -+ */ -+ if (hcint.b.xacterr) { -+ qtd->error_count += st->nr_errors; -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ahberr) { -+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ local_fiq_disable(); -+ BUG(); -+ } -+ break; -+ -+ case FIQ_NP_SPLIT_LS_ABORTED: -+ /* A few cases can cause this - either an unknown state on a SSPLIT or -+ * STALL/data toggle error response on a CSPLIT */ -+ if (hcint.b.stall) { -+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.datatglerr) { -+ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.bblerr) { -+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.ahberr) { -+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ local_fiq_disable(); -+ BUG(); -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_DONE: -+ /* Isoc IN or Interrupt IN/OUT */ -+ -+ /* Flow control here is different from the normal execution by the driver. -+ * We need to completely ignore most of the driver's method of handling -+ * split transactions and do it ourselves. -+ */ -+ if (hc->ep_type == UE_INTERRUPT) { -+ if (hcint.b.nak) { -+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); -+ } else if (hc->ep_is_in) { -+ int len; -+ len = dwc_otg_fiq_unsetup_per_dma(hcd, hc->qh, qtd, num); -+ //printk(KERN_NOTICE "FIQ Transaction: hc=%d len=%d urb_len = %d\n", num, len, qtd->urb->length); -+ qtd->urb->actual_length += len; -+ if (qtd->urb->actual_length >= qtd->urb->length) { -+ qtd->urb->status = 0; -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ /* Interrupt transfer not complete yet - is it a short read? */ -+ if (len < hc->max_packet) { -+ /* Interrupt transaction complete */ -+ qtd->urb->status = 0; -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ /* Further transactions required */ -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ } else { -+ /* Interrupt OUT complete. */ -+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd); -+ qtd->urb->actual_length += hc->xfer_len; -+ if (qtd->urb->actual_length >= qtd->urb->length) { -+ qtd->urb->status = 0; -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ } else { -+ /* ISOC IN complete. */ -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ int len = 0; -+ /* Record errors, update qtd. */ -+ if (st->nr_errors) { -+ frame_desc->actual_length = 0; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ } else { -+ frame_desc->status = 0; -+ /* Unswizzle dma */ -+ len = dwc_otg_fiq_unsetup_per_dma(hcd, qh, qtd, num); -+ frame_desc->actual_length = len; -+ } -+ qtd->isoc_frame_index++; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ break; -+ -+ case FIQ_PER_ISO_OUT_DONE: { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ /* Record errors, update qtd. */ -+ if (st->nr_errors) { -+ frame_desc->actual_length = 0; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ } else { -+ frame_desc->status = 0; -+ frame_desc->actual_length = frame_desc->length; -+ } -+ qtd->isoc_frame_index++; -+ qtd->isoc_split_offset = 0; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_NYET_ABORTED: -+ /* Doh. lost the data. */ -+ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " -+ "- FIQ reported NYET. Data may have been lost.\n", -+ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); -+ if (hc->ep_type == UE_ISOCHRONOUS) { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ /* Record errors, update qtd. */ -+ frame_desc->actual_length = 0; -+ frame_desc->status = -DWC_E_PROTOCOL; -+ qtd->isoc_frame_index++; -+ qtd->isoc_split_offset = 0; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ break; -+ -+ case FIQ_HS_ISOC_DONE: -+ /* The FIQ has performed a whole pile of isochronous transactions. -+ * The status is recorded as the interrupt state should the transaction -+ * fail. -+ */ -+ dwc_otg_fiq_unmangle_isoc(hcd, qh, qtd, num); -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ break; -+ -+ case FIQ_PER_SPLIT_LS_ABORTED: -+ if (hcint.b.xacterr) { -+ /* Hub has responded with an ERR packet. Device -+ * has been unplugged or the port has been disabled. -+ * TODO: need to issue a reset to the hub port. */ -+ qtd->error_count += 3; -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.stall) { -+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); -+ } else if (hcint.b.bblerr) { -+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); -+ } else { -+ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x failed " -+ "- FIQ reported FSM=%d. Data may have been lost.\n", -+ st->fsm, hc->dev_addr, hc->ep_num); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ break; -+ -+ case FIQ_PER_SPLIT_HS_ABORTED: -+ /* Either the SSPLIT phase suffered transaction errors or something -+ * unexpected happened. -+ */ -+ qtd->error_count += 3; -+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ break; -+ -+ case FIQ_PER_SPLIT_TIMEOUT: -+ /* Couldn't complete in the nominated frame */ -+ printk(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed " -+ "- FIQ timed out. Data may have been lost.\n", -+ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3); -+ if (hc->ep_type == UE_ISOCHRONOUS) { -+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index]; -+ /* Record errors, update qtd. */ -+ frame_desc->actual_length = 0; -+ if (hc->ep_is_in) { -+ frame_desc->status = -DWC_E_NO_STREAM_RES; -+ } else { -+ frame_desc->status = -DWC_E_COMMUNICATION; -+ } -+ qtd->isoc_frame_index++; -+ if (qtd->isoc_frame_index == qtd->urb->packet_count) { -+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0); -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE); -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE); -+ } -+ } else { -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ break; -+ -+ default: -+ DWC_WARN("Unexpected state received on hc=%d fsm=%d on transfer to device %d ep 0x%x", -+ hc->hc_num, st->fsm, hc->dev_addr, hc->ep_num); -+ qtd->error_count++; -+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS); -+ } -+ return; -+} -+ -+/** Handles interrupt for a specific Host Channel */ -+int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num) -+{ -+ int retval = 0; -+ hcint_data_t hcint; -+ hcintmsk_data_t hcintmsk; -+ dwc_hc_t *hc; -+ dwc_otg_hc_regs_t *hc_regs; -+ dwc_otg_qtd_t *qtd; -+ -+ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); -+ -+ hc = dwc_otg_hcd->hc_ptr_array[num]; -+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; -+ if(hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) { -+ /* We are responding to a channel disable. Driver -+ * state is cleared - our qtd has gone away. -+ */ -+ release_channel(dwc_otg_hcd, hc, NULL, hc->halt_status); -+ return 1; -+ } -+ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list); -+ -+ /* -+ * FSM mode: Check to see if this is a HC interrupt from a channel handled by the FIQ. -+ * Execution path is fundamentally different for the channels after a FIQ has completed -+ * a split transaction. -+ */ -+ if (fiq_fsm_enable) { -+ switch (dwc_otg_hcd->fiq_state->channel[num].fsm) { -+ case FIQ_PASSTHROUGH: -+ break; -+ case FIQ_PASSTHROUGH_ERRORSTATE: -+ /* Hook into the error count */ -+ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "HCDERR%02d", num); -+ if (!dwc_otg_hcd->fiq_state->channel[num].nr_errors) { -+ qtd->error_count = 0; -+ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "RESET "); -+ } -+ break; -+ default: -+ dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd, num); -+ return 1; -+ } -+ } -+ -+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint); -+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk); -+ hcint.d32 = hcint.d32 & hcintmsk.d32; -+ if (!dwc_otg_hcd->core_if->dma_enable) { -+ if (hcint.b.chhltd && hcint.d32 != 0x2) { -+ hcint.b.chhltd = 0; -+ } -+ } -+ -+ if (hcint.b.xfercomp) { -+ retval |= -+ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ /* -+ * If NYET occurred at same time as Xfer Complete, the NYET is -+ * handled by the Xfer Complete interrupt handler. Don't want -+ * to call the NYET interrupt handler in this case. -+ */ -+ hcint.b.nyet = 0; -+ } -+ if (hcint.b.chhltd) { -+ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.ahberr) { -+ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.stall) { -+ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.nak) { -+ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.ack) { -+ if(!hcint.b.chhltd) -+ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.nyet) { -+ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.xacterr) { -+ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.bblerr) { -+ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.frmovrun) { -+ retval |= -+ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ if (hcint.b.datatglerr) { -+ retval |= -+ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); -+ } -+ -+ return retval; -+} -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c -@@ -0,0 +1,1005 @@ -+ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $ -+ * $Revision: #20 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1872981 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** -+ * @file -+ * -+ * This file contains the implementation of the HCD. In Linux, the HCD -+ * implements the hc_driver API. -+ */ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/errno.h> -+#include <linux/list.h> -+#include <linux/interrupt.h> -+#include <linux/string.h> -+#include <linux/dma-mapping.h> -+#include <linux/version.h> -+#include <asm/io.h> -+#include <asm/fiq.h> -+#include <linux/usb.h> -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) -+#include <../drivers/usb/core/hcd.h> -+#else -+#include <linux/usb/hcd.h> -+#endif -+#include <asm/bug.h> -+ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) -+#define USB_URB_EP_LINKING 1 -+#else -+#define USB_URB_EP_LINKING 0 -+#endif -+ -+#include "dwc_otg_hcd_if.h" -+#include "dwc_otg_dbg.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_hcd.h" -+ -+extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end; -+ -+/** -+ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is -+ * qualified with its direction (possible 32 endpoints per device). -+ */ -+#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ -+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) -+ -+static const char dwc_otg_hcd_name[] = "dwc_otg_hcd"; -+ -+extern bool fiq_enable; -+ -+/** @name Linux HC Driver API Functions */ -+/** @{ */ -+/* manage i/o requests, device state */ -+static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ struct usb_host_endpoint *ep, -+#endif -+ struct urb *urb, gfp_t mem_flags); -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb); -+#endif -+#else /* kernels at or post 2.6.30 */ -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, -+ struct urb *urb, int status); -+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */ -+ -+static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep); -+#endif -+static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd); -+extern int hcd_start(struct usb_hcd *hcd); -+extern void hcd_stop(struct usb_hcd *hcd); -+static int get_frame_number(struct usb_hcd *hcd); -+extern int hub_status_data(struct usb_hcd *hcd, char *buf); -+extern int hub_control(struct usb_hcd *hcd, -+ u16 typeReq, -+ u16 wValue, u16 wIndex, char *buf, u16 wLength); -+ -+struct wrapper_priv_data { -+ dwc_otg_hcd_t *dwc_otg_hcd; -+}; -+ -+/** @} */ -+ -+static struct hc_driver dwc_otg_hc_driver = { -+ -+ .description = dwc_otg_hcd_name, -+ .product_desc = "DWC OTG Controller", -+ .hcd_priv_size = sizeof(struct wrapper_priv_data), -+ -+ .irq = dwc_otg_hcd_irq, -+ -+ .flags = HCD_MEMORY | HCD_USB2, -+ -+ //.reset = -+ .start = hcd_start, -+ //.suspend = -+ //.resume = -+ .stop = hcd_stop, -+ -+ .urb_enqueue = dwc_otg_urb_enqueue, -+ .urb_dequeue = dwc_otg_urb_dequeue, -+ .endpoint_disable = endpoint_disable, -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+ .endpoint_reset = endpoint_reset, -+#endif -+ .get_frame_number = get_frame_number, -+ -+ .hub_status_data = hub_status_data, -+ .hub_control = hub_control, -+ //.bus_suspend = -+ //.bus_resume = -+}; -+ -+/** Gets the dwc_otg_hcd from a struct usb_hcd */ -+static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) -+{ -+ struct wrapper_priv_data *p; -+ p = (struct wrapper_priv_data *)(hcd->hcd_priv); -+ return p->dwc_otg_hcd; -+} -+ -+/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ -+static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd) -+{ -+ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd); -+} -+ -+/** Gets the usb_host_endpoint associated with an URB. */ -+inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) -+{ -+ struct usb_device *dev = urb->dev; -+ int ep_num = usb_pipeendpoint(urb->pipe); -+ -+ if (usb_pipein(urb->pipe)) -+ return dev->ep_in[ep_num]; -+ else -+ return dev->ep_out[ep_num]; -+} -+ -+static int _disconnect(dwc_otg_hcd_t * hcd) -+{ -+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); -+ -+ usb_hcd->self.is_b_host = 0; -+ return 0; -+} -+ -+static int _start(dwc_otg_hcd_t * hcd) -+{ -+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); -+ -+ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd); -+ hcd_start(usb_hcd); -+ -+ return 0; -+} -+ -+static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr, -+ uint32_t * port_addr) -+{ -+ struct urb *urb = (struct urb *)urb_handle; -+ struct usb_bus *bus; -+#if 1 //GRAYG - temporary -+ if (NULL == urb_handle) -+ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG -+ if (NULL == urb->dev) -+ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG -+ if (NULL == port_addr) -+ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG -+#endif -+ if (urb->dev->tt) { -+ if (NULL == urb->dev->tt->hub) { -+ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n", -+ __func__); //GRAYG -+ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG -+ *hub_addr = 0; //GRAYG -+ // we probably shouldn't have a transaction translator if -+ // there's no associated hub? -+ } else { -+ bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd)); -+ if (urb->dev->tt->hub == bus->root_hub) -+ *hub_addr = 0; -+ else -+ *hub_addr = urb->dev->tt->hub->devnum; -+ } -+ *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1; -+ } else { -+ *hub_addr = 0; -+ *port_addr = urb->dev->ttport; -+ } -+ return 0; -+} -+ -+static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle) -+{ -+ struct urb *urb = (struct urb *)urb_handle; -+ return urb->dev->speed; -+} -+ -+static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd) -+{ -+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd); -+ return usb_hcd->self.b_hnp_enable; -+} -+ -+static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, -+ struct urb *urb) -+{ -+ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval; -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ hcd_to_bus(hcd)->bandwidth_isoc_reqs++; -+ } else { -+ hcd_to_bus(hcd)->bandwidth_int_reqs++; -+ } -+} -+ -+static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw, -+ struct urb *urb) -+{ -+ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval; -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ hcd_to_bus(hcd)->bandwidth_isoc_reqs--; -+ } else { -+ hcd_to_bus(hcd)->bandwidth_int_reqs--; -+ } -+} -+ -+/** -+ * Sets the final status of an URB and returns it to the device driver. Any -+ * required cleanup of the URB is performed. The HCD lock should be held on -+ * entry. -+ */ -+static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle, -+ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status) -+{ -+ struct urb *urb = (struct urb *)urb_handle; -+ urb_tq_entry_t *new_entry; -+ int rc = 0; -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n", -+ __func__, urb, usb_pipedevice(urb->pipe), -+ usb_pipeendpoint(urb->pipe), -+ usb_pipein(urb->pipe) ? "IN" : "OUT", status); -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ int i; -+ for (i = 0; i < urb->number_of_packets; i++) { -+ DWC_PRINTF(" ISO Desc %d status: %d\n", -+ i, urb->iso_frame_desc[i].status); -+ } -+ } -+ } -+ new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t)); -+ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb); -+ /* Convert status value. */ -+ switch (status) { -+ case -DWC_E_PROTOCOL: -+ status = -EPROTO; -+ break; -+ case -DWC_E_IN_PROGRESS: -+ status = -EINPROGRESS; -+ break; -+ case -DWC_E_PIPE: -+ status = -EPIPE; -+ break; -+ case -DWC_E_IO: -+ status = -EIO; -+ break; -+ case -DWC_E_TIMEOUT: -+ status = -ETIMEDOUT; -+ break; -+ case -DWC_E_OVERFLOW: -+ status = -EOVERFLOW; -+ break; -+ case -DWC_E_SHUTDOWN: -+ status = -ESHUTDOWN; -+ break; -+ default: -+ if (status) { -+ DWC_PRINTF("Uknown urb status %d\n", status); -+ -+ } -+ } -+ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ int i; -+ -+ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb); -+ for (i = 0; i < urb->number_of_packets; ++i) { -+ urb->iso_frame_desc[i].actual_length = -+ dwc_otg_hcd_urb_get_iso_desc_actual_length -+ (dwc_otg_urb, i); -+ urb->iso_frame_desc[i].status = -+ dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i); -+ } -+ } -+ -+ urb->status = status; -+ urb->hcpriv = NULL; -+ if (!status) { -+ if ((urb->transfer_flags & URB_SHORT_NOT_OK) && -+ (urb->actual_length < urb->transfer_buffer_length)) { -+ urb->status = -EREMOTEIO; -+ } -+ } -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) || -+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); -+ if (ep) { -+ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd), -+ dwc_otg_hcd_get_ep_bandwidth(hcd, -+ ep->hcpriv), -+ urb); -+ } -+ } -+ DWC_FREE(dwc_otg_urb); -+ if (!new_entry) { -+ DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n"); -+ urb->status = -EPROTO; -+ /* don't schedule the tasklet - -+ * directly return the packet here with error. */ -+#if USB_URB_EP_LINKING -+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); -+#endif -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb); -+#else -+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); -+#endif -+ } else { -+ new_entry->urb = urb; -+#if USB_URB_EP_LINKING -+ rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status); -+ if(0 == rc) { -+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb); -+ } -+#endif -+ if(0 == rc) { -+ DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry, -+ urb_tq_entries); -+ DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet); -+ } -+ } -+ return 0; -+} -+ -+static struct dwc_otg_hcd_function_ops hcd_fops = { -+ .start = _start, -+ .disconnect = _disconnect, -+ .hub_info = _hub_info, -+ .speed = _speed, -+ .complete = _complete, -+ .get_b_hnp_enable = _get_b_hnp_enable, -+}; -+ -+static struct fiq_handler fh = { -+ .name = "usb_fiq", -+}; -+ -+static void hcd_init_fiq(void *cookie) -+{ -+ dwc_otg_device_t *otg_dev = cookie; -+ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd; -+ struct pt_regs regs; -+ int irq; -+ -+ if (claim_fiq(&fh)) { -+ DWC_ERROR("Can't claim FIQ"); -+ BUG(); -+ } -+ DWC_WARN("FIQ on core %d at 0x%08x", -+ smp_processor_id(), -+ (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop)); -+ DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub)); -+ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub); -+ memset(®s,0,sizeof(regs)); -+ -+ regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state; -+ if (fiq_fsm_enable) { -+ regs.ARM_r9 = dwc_otg_hcd->core_if->core_params->host_channels; -+ //regs.ARM_r10 = dwc_otg_hcd->dma; -+ regs.ARM_fp = (long) dwc_otg_fiq_fsm; -+ } else { -+ regs.ARM_fp = (long) dwc_otg_fiq_nop; -+ } -+ -+ regs.ARM_sp = (long) dwc_otg_hcd->fiq_stack + (sizeof(struct fiq_stack) - 4); -+ -+// __show_regs(®s); -+ set_fiq_regs(®s); -+ -+ //Set the mphi periph to the required registers -+ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base; -+ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c; -+ dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28; -+ dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c; -+ dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50; -+ dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base; -+ DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base); -+ //Enable mphi peripheral -+ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl); -+#ifdef DEBUG -+ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000) -+ DWC_WARN("MPHI periph has been enabled"); -+ else -+ DWC_WARN("MPHI periph has NOT been enabled"); -+#endif -+ // Enable FIQ interrupt from USB peripheral -+#ifdef CONFIG_MULTI_IRQ_HANDLER -+ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1); -+#else -+ irq = INTERRUPT_VC_USB; -+#endif -+ if (irq < 0) { -+ DWC_ERROR("Can't get FIQ irq"); -+ return; -+ } -+ enable_fiq(irq); -+ local_fiq_enable(); -+} -+ -+/** -+ * Initializes the HCD. This function allocates memory for and initializes the -+ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the -+ * USB bus with the core and calls the hc_driver->start() function. It returns -+ * a negative error on failure. -+ */ -+int hcd_init(dwc_bus_dev_t *_dev) -+{ -+ struct usb_hcd *hcd = NULL; -+ dwc_otg_hcd_t *dwc_otg_hcd = NULL; -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ int retval = 0; -+ u64 dmamask; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev); -+ -+ /* Set device flags indicating whether the HCD supports DMA. */ -+ if (dwc_otg_is_dma_enable(otg_dev->core_if)) -+ dmamask = DMA_BIT_MASK(32); -+ else -+ dmamask = 0; -+ -+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE) -+ dma_set_mask(&_dev->dev, dmamask); -+ dma_set_coherent_mask(&_dev->dev, dmamask); -+#elif defined(PCI_INTERFACE) -+ pci_set_dma_mask(_dev, dmamask); -+ pci_set_consistent_dma_mask(_dev, dmamask); -+#endif -+ -+ /* -+ * Allocate memory for the base HCD plus the DWC OTG HCD. -+ * Initialize the base HCD. -+ */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) -+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id); -+#else -+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev)); -+ hcd->has_tt = 1; -+// hcd->uses_new_polling = 1; -+// hcd->poll_rh = 0; -+#endif -+ if (!hcd) { -+ retval = -ENOMEM; -+ goto error1; -+ } -+ -+ hcd->regs = otg_dev->os_dep.base; -+ -+ -+ /* Initialize the DWC OTG HCD. */ -+ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd(); -+ if (!dwc_otg_hcd) { -+ goto error2; -+ } -+ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd = -+ dwc_otg_hcd; -+ otg_dev->hcd = dwc_otg_hcd; -+ otg_dev->hcd->otg_dev = otg_dev; -+ -+ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) { -+ goto error2; -+ } -+ -+ if (fiq_enable) { -+ if (num_online_cpus() > 1) { -+ /* bcm2709: can run the FIQ on a separate core to IRQs */ -+ smp_call_function_single(1, hcd_init_fiq, otg_dev, 1); -+ } else { -+ smp_call_function_single(0, hcd_init_fiq, otg_dev, 1); -+ } -+ } -+ -+ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel) -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later -+ hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if); -+#endif -+ /* Don't support SG list at this point */ -+ hcd->self.sg_tablesize = 0; -+#endif -+ /* -+ * Finish generic HCD initialization and start the HCD. This function -+ * allocates the DMA buffer pool, registers the USB bus, requests the -+ * IRQ line, and calls hcd_start method. -+ */ -+#ifdef PLATFORM_INTERFACE -+ retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED); -+#else -+ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED); -+#endif -+ if (retval < 0) { -+ goto error2; -+ } -+ -+ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd); -+ return 0; -+ -+error2: -+ usb_put_hcd(hcd); -+error1: -+ return retval; -+} -+ -+/** -+ * Removes the HCD. -+ * Frees memory and resources associated with the HCD and deregisters the bus. -+ */ -+void hcd_remove(dwc_bus_dev_t *_dev) -+{ -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ dwc_otg_hcd_t *dwc_otg_hcd; -+ struct usb_hcd *hcd; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev); -+ -+ if (!otg_dev) { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); -+ return; -+ } -+ -+ dwc_otg_hcd = otg_dev->hcd; -+ -+ if (!dwc_otg_hcd) { -+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); -+ return; -+ } -+ -+ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); -+ -+ if (!hcd) { -+ DWC_DEBUGPL(DBG_ANY, -+ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", -+ __func__); -+ return; -+ } -+ usb_remove_hcd(hcd); -+ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL); -+ dwc_otg_hcd_remove(dwc_otg_hcd); -+ usb_put_hcd(hcd); -+} -+ -+/* ========================================================================= -+ * Linux HC Driver Functions -+ * ========================================================================= */ -+ -+/** Initializes the DWC_otg controller and its root hub and prepares it for host -+ * mode operation. Activates the root port. Returns 0 on success and a negative -+ * error code on failure. */ -+int hcd_start(struct usb_hcd *hcd) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ struct usb_bus *bus; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); -+ bus = hcd_to_bus(hcd); -+ -+ hcd->state = HC_STATE_RUNNING; -+ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) { -+ return 0; -+ } -+ -+ /* Initialize and connect root hub if one is not already attached */ -+ if (bus->root_hub) { -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); -+ /* Inform the HUB driver to resume. */ -+ usb_hcd_resume_root_hub(hcd); -+ } -+ -+ return 0; -+} -+ -+/** -+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are -+ * stopped. -+ */ -+void hcd_stop(struct usb_hcd *hcd) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+ dwc_otg_hcd_stop(dwc_otg_hcd); -+} -+ -+/** Returns the current frame number. */ -+static int get_frame_number(struct usb_hcd *hcd) -+{ -+ hprt0_data_t hprt0; -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0); -+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) -+ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd) >> 3; -+ else -+ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd); -+} -+ -+#ifdef DEBUG -+static void dump_urb_info(struct urb *urb, char *fn_name) -+{ -+ DWC_PRINTF("%s, urb %p\n", fn_name, urb); -+ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe)); -+ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), -+ (usb_pipein(urb->pipe) ? "IN" : "OUT")); -+ DWC_PRINTF(" Endpoint type: %s\n", ( { -+ char *pipetype; -+ switch (usb_pipetype(urb->pipe)) { -+case PIPE_CONTROL: -+pipetype = "CONTROL"; break; case PIPE_BULK: -+pipetype = "BULK"; break; case PIPE_INTERRUPT: -+pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS: -+pipetype = "ISOCHRONOUS"; break; default: -+ pipetype = "UNKNOWN"; break;}; -+ pipetype;} -+ )) ; -+ DWC_PRINTF(" Speed: %s\n", ( { -+ char *speed; switch (urb->dev->speed) { -+case USB_SPEED_HIGH: -+speed = "HIGH"; break; case USB_SPEED_FULL: -+speed = "FULL"; break; case USB_SPEED_LOW: -+speed = "LOW"; break; default: -+ speed = "UNKNOWN"; break;}; -+ speed;} -+ )) ; -+ DWC_PRINTF(" Max packet size: %d\n", -+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); -+ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length); -+ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n", -+ urb->transfer_buffer, (void *)urb->transfer_dma); -+ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n", -+ urb->setup_packet, (void *)urb->setup_dma); -+ DWC_PRINTF(" Interval: %d\n", urb->interval); -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ int i; -+ for (i = 0; i < urb->number_of_packets; i++) { -+ DWC_PRINTF(" ISO Desc %d:\n", i); -+ DWC_PRINTF(" offset: %d, length %d\n", -+ urb->iso_frame_desc[i].offset, -+ urb->iso_frame_desc[i].length); -+ } -+ } -+} -+#endif -+ -+/** Starts processing a USB transfer request specified by a USB Request Block -+ * (URB). mem_flags indicates the type of memory allocation to use while -+ * processing this URB. */ -+static int dwc_otg_urb_enqueue(struct usb_hcd *hcd, -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ struct usb_host_endpoint *ep, -+#endif -+ struct urb *urb, gfp_t mem_flags) -+{ -+ int retval = 0; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) -+ struct usb_host_endpoint *ep = urb->ep; -+#endif -+ dwc_irqflags_t irqflags; -+ void **ref_ep_hcpriv = &ep->hcpriv; -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ dwc_otg_hcd_urb_t *dwc_otg_urb; -+ int i; -+ int alloc_bandwidth = 0; -+ uint8_t ep_type = 0; -+ uint32_t flags = 0; -+ void *buf; -+ -+#ifdef DEBUG -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ dump_urb_info(urb, "dwc_otg_urb_enqueue"); -+ } -+#endif -+ -+ if (!urb->transfer_buffer && urb->transfer_buffer_length) -+ return -EINVAL; -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) -+ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ if (!dwc_otg_hcd_is_bandwidth_allocated -+ (dwc_otg_hcd, ref_ep_hcpriv)) { -+ alloc_bandwidth = 1; -+ } -+ } -+ -+ switch (usb_pipetype(urb->pipe)) { -+ case PIPE_CONTROL: -+ ep_type = USB_ENDPOINT_XFER_CONTROL; -+ break; -+ case PIPE_ISOCHRONOUS: -+ ep_type = USB_ENDPOINT_XFER_ISOC; -+ break; -+ case PIPE_BULK: -+ ep_type = USB_ENDPOINT_XFER_BULK; -+ break; -+ case PIPE_INTERRUPT: -+ ep_type = USB_ENDPOINT_XFER_INT; -+ break; -+ default: -+ DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe)); -+ } -+ -+ /* # of packets is often 0 - do we really need to call this then? */ -+ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd, -+ urb->number_of_packets, -+ mem_flags == GFP_ATOMIC ? 1 : 0); -+ -+ if(dwc_otg_urb == NULL) -+ return -ENOMEM; -+ -+ if (!dwc_otg_urb && urb->number_of_packets) -+ return -ENOMEM; -+ -+ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe), -+ usb_pipeendpoint(urb->pipe), ep_type, -+ usb_pipein(urb->pipe), -+ usb_maxpacket(urb->dev, urb->pipe, -+ !(usb_pipein(urb->pipe)))); -+ -+ buf = urb->transfer_buffer; -+ if (hcd->self.uses_dma && !buf && urb->transfer_buffer_length) { -+ /* -+ * Calculate virtual address from physical address, -+ * because some class driver may not fill transfer_buffer. -+ * In Buffer DMA mode virual address is used, -+ * when handling non DWORD aligned buffers. -+ */ -+ buf = (void *)__bus_to_virt((unsigned long)urb->transfer_dma); -+ dev_warn_once(&urb->dev->dev, -+ "USB transfer_buffer was NULL, will use __bus_to_virt(%pad)=%p\n", -+ &urb->transfer_dma, buf); -+ } -+ -+ if (!(urb->transfer_flags & URB_NO_INTERRUPT)) -+ flags |= URB_GIVEBACK_ASAP; -+ if (urb->transfer_flags & URB_ZERO_PACKET) -+ flags |= URB_SEND_ZERO_PACKET; -+ -+ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf, -+ urb->transfer_dma, -+ urb->transfer_buffer_length, -+ urb->setup_packet, -+ urb->setup_dma, flags, urb->interval); -+ -+ for (i = 0; i < urb->number_of_packets; ++i) { -+ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i, -+ urb-> -+ iso_frame_desc[i].offset, -+ urb-> -+ iso_frame_desc[i].length); -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags); -+ urb->hcpriv = dwc_otg_urb; -+#if USB_URB_EP_LINKING -+ retval = usb_hcd_link_urb_to_ep(hcd, urb); -+ if (0 == retval) -+#endif -+ { -+ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb, -+ /*(dwc_otg_qh_t **)*/ -+ ref_ep_hcpriv, 1); -+ if (0 == retval) { -+ if (alloc_bandwidth) { -+ allocate_bus_bandwidth(hcd, -+ dwc_otg_hcd_get_ep_bandwidth( -+ dwc_otg_hcd, *ref_ep_hcpriv), -+ urb); -+ } -+ } else { -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval); -+#if USB_URB_EP_LINKING -+ usb_hcd_unlink_urb_from_ep(hcd, urb); -+#endif -+ DWC_FREE(dwc_otg_urb); -+ urb->hcpriv = NULL; -+ if (retval == -DWC_E_NO_DEVICE) -+ retval = -ENODEV; -+ } -+ } -+#if USB_URB_EP_LINKING -+ else -+ { -+ DWC_FREE(dwc_otg_urb); -+ urb->hcpriv = NULL; -+ } -+#endif -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags); -+ return retval; -+} -+ -+/** Aborts/cancels a USB transfer request. Always returns 0 to indicate -+ * success. */ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) -+#else -+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) -+#endif -+{ -+ dwc_irqflags_t flags; -+ dwc_otg_hcd_t *dwc_otg_hcd; -+ int rc; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); -+ -+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+#ifdef DEBUG -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ dump_urb_info(urb, "dwc_otg_urb_dequeue"); -+ } -+#endif -+ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ rc = usb_hcd_check_unlink_urb(hcd, urb, status); -+ if (0 == rc) { -+ if(urb->hcpriv != NULL) { -+ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd, -+ (dwc_otg_hcd_urb_t *)urb->hcpriv); -+ -+ DWC_FREE(urb->hcpriv); -+ urb->hcpriv = NULL; -+ } -+ } -+ -+ if (0 == rc) { -+ /* Higher layer software sets URB status. */ -+#if USB_URB_EP_LINKING -+ usb_hcd_unlink_urb_from_ep(hcd, urb); -+#endif -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+ -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ usb_hcd_giveback_urb(hcd, urb); -+#else -+ usb_hcd_giveback_urb(hcd, urb, status); -+#endif -+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { -+ DWC_PRINTF("Called usb_hcd_giveback_urb() \n"); -+ DWC_PRINTF(" 1urb->status = %d\n", urb->status); -+ } -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n"); -+ } else { -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n", -+ rc); -+ } -+ -+ return rc; -+} -+ -+/* Frees resources in the DWC_otg controller related to a given endpoint. Also -+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint -+ * must already be dequeued. */ -+static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+ DWC_DEBUGPL(DBG_HCD, -+ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " -+ "endpoint=%d\n", ep->desc.bEndpointAddress, -+ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); -+ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250); -+ ep->hcpriv = NULL; -+} -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30) -+/* Resets endpoint specific parameter values, in current version used to reset -+ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */ -+static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) -+{ -+ dwc_irqflags_t flags; -+ struct usb_device *udev = NULL; -+ int epnum = usb_endpoint_num(&ep->desc); -+ int is_out = usb_endpoint_dir_out(&ep->desc); -+ int is_control = usb_endpoint_xfer_control(&ep->desc); -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep); -+ -+ if (dev) -+ udev = to_usb_device(dev); -+ else -+ return; -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum); -+ -+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags); -+ usb_settoggle(udev, epnum, is_out, 0); -+ if (is_control) -+ usb_settoggle(udev, epnum, !is_out, 0); -+ -+ if (ep->hcpriv) { -+ dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv); -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags); -+} -+#endif -+ -+/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if -+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid -+ * interrupt. -+ * -+ * This function is called by the USB core when an interrupt occurs */ -+static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd); -+ if (retval != 0) { -+ S3C2410X_CLEAR_EINTPEND(); -+ } -+ return IRQ_RETVAL(retval); -+} -+ -+/** Creates Status Change bitmap for the root hub and root port. The bitmap is -+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 -+ * is the status change indicator for the single root port. Returns 1 if either -+ * change indicator is 1, otherwise returns 0. */ -+int hub_status_data(struct usb_hcd *hcd, char *buf) -+{ -+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); -+ -+ buf[0] = 0; -+ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1; -+ -+ return (buf[0] != 0); -+} -+ -+/** Handles hub class-specific requests. */ -+int hub_control(struct usb_hcd *hcd, -+ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) -+{ -+ int retval; -+ -+ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd), -+ typeReq, wValue, wIndex, buf, wLength); -+ -+ switch (retval) { -+ case -DWC_E_INVALID: -+ retval = -EINVAL; -+ break; -+ } -+ -+ return retval; -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c -@@ -0,0 +1,963 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $ -+ * $Revision: #44 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_DEVICE_ONLY -+ -+/** -+ * @file -+ * -+ * This file contains the functions to manage Queue Heads and Queue -+ * Transfer Descriptors. -+ */ -+ -+#include "dwc_otg_hcd.h" -+#include "dwc_otg_regs.h" -+ -+extern bool microframe_schedule; -+ -+/** -+ * Free each QTD in the QH's QTD-list then free the QH. QH should already be -+ * removed from a list. QTD list should already be empty if called from URB -+ * Dequeue. -+ * -+ * @param hcd HCD instance. -+ * @param qh The QH to free. -+ */ -+void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ dwc_otg_qtd_t *qtd, *qtd_tmp; -+ dwc_irqflags_t flags; -+ uint32_t buf_size = 0; -+ uint8_t *align_buf_virt = NULL; -+ dwc_dma_t align_buf_dma; -+ struct device *dev = dwc_otg_hcd_to_dev(hcd); -+ -+ /* Free each QTD in the QTD list */ -+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags); -+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) { -+ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry); -+ dwc_otg_hcd_qtd_free(qtd); -+ } -+ -+ if (hcd->core_if->dma_desc_enable) { -+ dwc_otg_hcd_qh_free_ddma(hcd, qh); -+ } else if (qh->dw_align_buf) { -+ if (qh->ep_type == UE_ISOCHRONOUS) { -+ buf_size = 4096; -+ } else { -+ buf_size = hcd->core_if->core_params->max_transfer_size; -+ } -+ align_buf_virt = qh->dw_align_buf; -+ align_buf_dma = qh->dw_align_buf_dma; -+ } -+ -+ DWC_FREE(qh); -+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags); -+ if (align_buf_virt) -+ DWC_DMA_FREE(dev, buf_size, align_buf_virt, align_buf_dma); -+ return; -+} -+ -+#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6) -+#define HS_HOST_DELAY 5 /* nanoseconds */ -+#define FS_LS_HOST_DELAY 1000 /* nanoseconds */ -+#define HUB_LS_SETUP 333 /* nanoseconds */ -+#define NS_TO_US(ns) ((ns + 500) / 1000) -+ /* convert & round nanoseconds to microseconds */ -+ -+static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount) -+{ -+ unsigned long retval; -+ -+ switch (speed) { -+ case USB_SPEED_HIGH: -+ if (is_isoc) { -+ retval = -+ ((38 * 8 * 2083) + -+ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + -+ HS_HOST_DELAY; -+ } else { -+ retval = -+ ((55 * 8 * 2083) + -+ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 + -+ HS_HOST_DELAY; -+ } -+ break; -+ case USB_SPEED_FULL: -+ if (is_isoc) { -+ retval = -+ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; -+ if (is_in) { -+ retval = 7268 + FS_LS_HOST_DELAY + retval; -+ } else { -+ retval = 6265 + FS_LS_HOST_DELAY + retval; -+ } -+ } else { -+ retval = -+ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000; -+ retval = 9107 + FS_LS_HOST_DELAY + retval; -+ } -+ break; -+ case USB_SPEED_LOW: -+ if (is_in) { -+ retval = -+ (67667 * (31 + 10 * BitStuffTime(bytecount))) / -+ 1000; -+ retval = -+ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + -+ retval; -+ } else { -+ retval = -+ (66700 * (31 + 10 * BitStuffTime(bytecount))) / -+ 1000; -+ retval = -+ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY + -+ retval; -+ } -+ break; -+ default: -+ DWC_WARN("Unknown device speed\n"); -+ retval = -1; -+ } -+ -+ return NS_TO_US(retval); -+} -+ -+/** -+ * Initializes a QH structure. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh The QH to init. -+ * @param urb Holds the information about the device/endpoint that we need -+ * to initialize the QH. -+ */ -+#define SCHEDULE_SLOP 10 -+void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb) -+{ -+ char *speed, *type; -+ int dev_speed; -+ uint32_t hub_addr, hub_port; -+ -+ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t)); -+ -+ /* Initialize QH */ -+ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info); -+ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0; -+ -+ qh->data_toggle = DWC_OTG_HC_PID_DATA0; -+ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info); -+ DWC_CIRCLEQ_INIT(&qh->qtd_list); -+ DWC_LIST_INIT(&qh->qh_list_entry); -+ qh->channel = NULL; -+ -+ /* FS/LS Enpoint on HS Hub -+ * NOT virtual root hub */ -+ dev_speed = hcd->fops->speed(hcd, urb->priv); -+ -+ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port); -+ qh->do_split = 0; -+ if (microframe_schedule) -+ qh->speed = dev_speed; -+ -+ qh->nak_frame = 0xffff; -+ -+ if (((dev_speed == USB_SPEED_LOW) || -+ (dev_speed == USB_SPEED_FULL)) && -+ (hub_addr != 0 && hub_addr != 1)) { -+ DWC_DEBUGPL(DBG_HCD, -+ "QH init: EP %d: TT found at hub addr %d, for port %d\n", -+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr, -+ hub_port); -+ qh->do_split = 1; -+ qh->skip_count = 0; -+ } -+ -+ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) { -+ /* Compute scheduling parameters once and save them. */ -+ hprt0_data_t hprt; -+ -+ /** @todo Account for split transfers in the bus time. */ -+ int bytecount = -+ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); -+ -+ qh->usecs = -+ calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed), -+ qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS), -+ bytecount); -+ /* Start in a slightly future (micro)frame. */ -+ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, -+ SCHEDULE_SLOP); -+ qh->interval = urb->interval; -+ -+#if 0 -+ /* Increase interrupt polling rate for debugging. */ -+ if (qh->ep_type == UE_INTERRUPT) { -+ qh->interval = 8; -+ } -+#endif -+ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0); -+ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && -+ ((dev_speed == USB_SPEED_LOW) || -+ (dev_speed == USB_SPEED_FULL))) { -+ qh->interval *= 8; -+ qh->sched_frame |= 0x7; -+ qh->start_split_frame = qh->sched_frame; -+ } -+ -+ } -+ -+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", -+ dwc_otg_hcd_get_dev_addr(&urb->pipe_info)); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", -+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), -+ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"); -+ switch (dev_speed) { -+ case USB_SPEED_LOW: -+ qh->dev_speed = DWC_OTG_EP_SPEED_LOW; -+ speed = "low"; -+ break; -+ case USB_SPEED_FULL: -+ qh->dev_speed = DWC_OTG_EP_SPEED_FULL; -+ speed = "full"; -+ break; -+ case USB_SPEED_HIGH: -+ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH; -+ speed = "high"; -+ break; -+ default: -+ speed = "?"; -+ break; -+ } -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); -+ -+ switch (qh->ep_type) { -+ case UE_ISOCHRONOUS: -+ type = "isochronous"; -+ break; -+ case UE_INTERRUPT: -+ type = "interrupt"; -+ break; -+ case UE_CONTROL: -+ type = "control"; -+ break; -+ case UE_BULK: -+ type = "bulk"; -+ break; -+ default: -+ type = "?"; -+ break; -+ } -+ -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type); -+ -+#ifdef DEBUG -+ if (qh->ep_type == UE_INTERRUPT) { -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", -+ qh->usecs); -+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", -+ qh->interval); -+ } -+#endif -+ -+} -+ -+/** -+ * This function allocates and initializes a QH. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param urb Holds the information about the device/endpoint that we need -+ * to initialize the QH. -+ * @param atomic_alloc Flag to do atomic allocation if needed -+ * -+ * @return Returns pointer to the newly allocated QH, or NULL on error. */ -+dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd, -+ dwc_otg_hcd_urb_t * urb, int atomic_alloc) -+{ -+ dwc_otg_qh_t *qh; -+ -+ /* Allocate memory */ -+ /** @todo add memflags argument */ -+ qh = dwc_otg_hcd_qh_alloc(atomic_alloc); -+ if (qh == NULL) { -+ DWC_ERROR("qh allocation failed"); -+ return NULL; -+ } -+ -+ qh_init(hcd, qh, urb); -+ -+ if (hcd->core_if->dma_desc_enable -+ && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) { -+ dwc_otg_hcd_qh_free(hcd, qh); -+ return NULL; -+ } -+ -+ return qh; -+} -+ -+/* microframe_schedule=0 start */ -+ -+/** -+ * Checks that a channel is available for a periodic transfer. -+ * -+ * @return 0 if successful, negative error code otherise. -+ */ -+static int periodic_channel_available(dwc_otg_hcd_t * hcd) -+{ -+ /* -+ * Currently assuming that there is a dedicated host channnel for each -+ * periodic transaction plus at least one host channel for -+ * non-periodic transactions. -+ */ -+ int status; -+ int num_channels; -+ -+ num_channels = hcd->core_if->core_params->host_channels; -+ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) -+ && (hcd->periodic_channels < num_channels - 1)) { -+ status = 0; -+ } else { -+ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", -+ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE -+ status = -DWC_E_NO_SPACE; -+ } -+ -+ return status; -+} -+ -+/** -+ * Checks that there is sufficient bandwidth for the specified QH in the -+ * periodic schedule. For simplicity, this calculation assumes that all the -+ * transfers in the periodic schedule may occur in the same (micro)frame. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH containing periodic bandwidth required. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status; -+ int16_t max_claimed_usecs; -+ -+ status = 0; -+ -+ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) { -+ /* -+ * High speed mode. -+ * Max periodic usecs is 80% x 125 usec = 100 usec. -+ */ -+ -+ max_claimed_usecs = 100 - qh->usecs; -+ } else { -+ /* -+ * Full speed mode. -+ * Max periodic usecs is 90% x 1000 usec = 900 usec. -+ */ -+ max_claimed_usecs = 900 - qh->usecs; -+ } -+ -+ if (hcd->periodic_usecs > max_claimed_usecs) { -+ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE -+ status = -DWC_E_NO_SPACE; -+ } -+ -+ return status; -+} -+ -+/* microframe_schedule=0 end */ -+ -+/** -+ * Microframe scheduler -+ * track the total use in hcd->frame_usecs -+ * keep each qh use in qh->frame_usecs -+ * when surrendering the qh then donate the time back -+ */ -+const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 }; -+ -+/* -+ * called from dwc_otg_hcd.c:dwc_otg_hcd_init -+ */ -+int init_hcd_usecs(dwc_otg_hcd_t *_hcd) -+{ -+ int i; -+ for (i=0; i<8; i++) { -+ _hcd->frame_usecs[i] = max_uframe_usecs[i]; -+ } -+ return 0; -+} -+ -+static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) -+{ -+ int i; -+ unsigned short utime; -+ int t_left; -+ int ret; -+ int done; -+ -+ ret = -1; -+ utime = _qh->usecs; -+ t_left = utime; -+ i = 0; -+ done = 0; -+ while (done == 0) { -+ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */ -+ if (utime <= _hcd->frame_usecs[i]) { -+ _hcd->frame_usecs[i] -= utime; -+ _qh->frame_usecs[i] += utime; -+ t_left -= utime; -+ ret = i; -+ done = 1; -+ return ret; -+ } else { -+ i++; -+ if (i == 8) { -+ done = 1; -+ ret = -1; -+ } -+ } -+ } -+ return ret; -+ } -+ -+/* -+ * use this for FS apps that can span multiple uframes -+ */ -+static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) -+{ -+ int i; -+ int j; -+ unsigned short utime; -+ int t_left; -+ int ret; -+ int done; -+ unsigned short xtime; -+ -+ ret = -1; -+ utime = _qh->usecs; -+ t_left = utime; -+ i = 0; -+ done = 0; -+loop: -+ while (done == 0) { -+ if(_hcd->frame_usecs[i] <= 0) { -+ i++; -+ if (i == 8) { -+ done = 1; -+ ret = -1; -+ } -+ goto loop; -+ } -+ -+ /* -+ * we need n consecutive slots -+ * so use j as a start slot j plus j+1 must be enough time (for now) -+ */ -+ xtime= _hcd->frame_usecs[i]; -+ for (j = i+1 ; j < 8 ; j++ ) { -+ /* -+ * if we add this frame remaining time to xtime we may -+ * be OK, if not we need to test j for a complete frame -+ */ -+ if ((xtime+_hcd->frame_usecs[j]) < utime) { -+ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) { -+ j = 8; -+ ret = -1; -+ continue; -+ } -+ } -+ if (xtime >= utime) { -+ ret = i; -+ j = 8; /* stop loop with a good value ret */ -+ continue; -+ } -+ /* add the frame time to x time */ -+ xtime += _hcd->frame_usecs[j]; -+ /* we must have a fully available next frame or break */ -+ if ((xtime < utime) -+ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) { -+ ret = -1; -+ j = 8; /* stop loop with a bad value ret */ -+ continue; -+ } -+ } -+ if (ret >= 0) { -+ t_left = utime; -+ for (j = i; (t_left>0) && (j < 8); j++ ) { -+ t_left -= _hcd->frame_usecs[j]; -+ if ( t_left <= 0 ) { -+ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left; -+ _hcd->frame_usecs[j]= -t_left; -+ ret = i; -+ done = 1; -+ } else { -+ _qh->frame_usecs[j] += _hcd->frame_usecs[j]; -+ _hcd->frame_usecs[j] = 0; -+ } -+ } -+ } else { -+ i++; -+ if (i == 8) { -+ done = 1; -+ ret = -1; -+ } -+ } -+ } -+ return ret; -+} -+ -+static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh) -+{ -+ int ret; -+ ret = -1; -+ -+ if (_qh->speed == USB_SPEED_HIGH) { -+ /* if this is a hs transaction we need a full frame */ -+ ret = find_single_uframe(_hcd, _qh); -+ } else { -+ /* if this is a fs transaction we may need a sequence of frames */ -+ ret = find_multi_uframe(_hcd, _qh); -+ } -+ return ret; -+} -+ -+/** -+ * Checks that the max transfer size allowed in a host channel is large enough -+ * to handle the maximum data transfer in a single (micro)frame for a periodic -+ * transfer. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for a periodic endpoint. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status; -+ uint32_t max_xfer_size; -+ uint32_t max_channel_xfer_size; -+ -+ status = 0; -+ -+ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); -+ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; -+ -+ if (max_xfer_size > max_channel_xfer_size) { -+ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n", -+ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE -+ status = -DWC_E_NO_SPACE; -+ } -+ -+ return status; -+} -+ -+ -+ -+/** -+ * Schedules an interrupt or isochronous transfer in the periodic schedule. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for the periodic transfer. The QH should already contain the -+ * scheduling information. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status = 0; -+ -+ if (microframe_schedule) { -+ int frame; -+ status = find_uframe(hcd, qh); -+ frame = -1; -+ if (status == 0) { -+ frame = 7; -+ } else { -+ if (status > 0 ) -+ frame = status-1; -+ } -+ -+ /* Set the new frame up */ -+ if (frame > -1) { -+ qh->sched_frame &= ~0x7; -+ qh->sched_frame |= (frame & 7); -+ } -+ -+ if (status != -1) -+ status = 0; -+ } else { -+ status = periodic_channel_available(hcd); -+ if (status) { -+ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE -+ return status; -+ } -+ -+ status = check_periodic_bandwidth(hcd, qh); -+ } -+ if (status) { -+ DWC_INFO("%s: Insufficient periodic bandwidth for " -+ "periodic transfer.\n", __func__); -+ return status; -+ } -+ status = check_max_xfer_size(hcd, qh); -+ if (status) { -+ DWC_INFO("%s: Channel max transfer size too small " -+ "for periodic transfer.\n", __func__); -+ return status; -+ } -+ -+ if (hcd->core_if->dma_desc_enable) { -+ /* Don't rely on SOF and start in ready schedule */ -+ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry); -+ } -+ else { -+ if(fiq_enable && (DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, hcd->fiq_state->next_sched_frame))) -+ { -+ hcd->fiq_state->next_sched_frame = qh->sched_frame; -+ -+ } -+ /* Always start in the inactive schedule. */ -+ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry); -+ } -+ -+ if (!microframe_schedule) { -+ /* Reserve the periodic channel. */ -+ hcd->periodic_channels++; -+ } -+ -+ /* Update claimed usecs per (micro)frame. */ -+ hcd->periodic_usecs += qh->usecs; -+ -+ return status; -+} -+ -+ -+/** -+ * This function adds a QH to either the non periodic or periodic schedule if -+ * it is not already in the schedule. If the QH is already in the schedule, no -+ * action is taken. -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int status = 0; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ /* QH already in a schedule. */ -+ return status; -+ } -+ -+ /* Add the new QH to the appropriate schedule */ -+ if (dwc_qh_is_non_per(qh)) { -+ /* Always start in the inactive schedule. */ -+ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive, -+ &qh->qh_list_entry); -+ //hcd->fiq_state->kick_np_queues = 1; -+ } else { -+ status = schedule_periodic(hcd, qh); -+ if ( !hcd->periodic_qh_count ) { -+ intr_mask.b.sofintr = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32); -+ } -+ } -+ hcd->periodic_qh_count++; -+ } -+ -+ return status; -+} -+ -+/** -+ * Removes an interrupt or isochronous transfer from the periodic schedule. -+ * -+ * @param hcd The HCD state structure for the DWC OTG controller. -+ * @param qh QH for the periodic transfer. -+ */ -+static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ int i; -+ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); -+ -+ /* Update claimed usecs per (micro)frame. */ -+ hcd->periodic_usecs -= qh->usecs; -+ -+ if (!microframe_schedule) { -+ /* Release the periodic channel reservation. */ -+ hcd->periodic_channels--; -+ } else { -+ for (i = 0; i < 8; i++) { -+ hcd->frame_usecs[i] += qh->frame_usecs[i]; -+ qh->frame_usecs[i] = 0; -+ } -+ } -+} -+ -+/** -+ * Removes a QH from either the non-periodic or periodic schedule. Memory is -+ * not freed. -+ * -+ * @param hcd The HCD state structure. -+ * @param qh QH to remove from schedule. */ -+void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) { -+ /* QH is not in a schedule. */ -+ return; -+ } -+ -+ if (dwc_qh_is_non_per(qh)) { -+ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { -+ hcd->non_periodic_qh_ptr = -+ hcd->non_periodic_qh_ptr->next; -+ } -+ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry); -+ //if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) -+ // hcd->fiq_state->kick_np_queues = 1; -+ } else { -+ deschedule_periodic(hcd, qh); -+ hcd->periodic_qh_count--; -+ if( !hcd->periodic_qh_count && !fiq_fsm_enable ) { -+ intr_mask.b.sofintr = 1; -+ if (fiq_enable) { -+ local_fiq_disable(); -+ fiq_fsm_spin_lock(&hcd->fiq_state->lock); -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); -+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock); -+ local_fiq_enable(); -+ } else { -+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0); -+ } -+ } -+ } -+} -+ -+/** -+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active -+ * non-periodic schedule. The QH is added to the inactive non-periodic -+ * schedule if any QTDs are still attached to the QH. -+ * -+ * For periodic QHs, the QH is removed from the periodic queued schedule. If -+ * there are any QTDs still attached to the QH, the QH is added to either the -+ * periodic inactive schedule or the periodic ready schedule and its next -+ * scheduled frame is calculated. The QH is placed in the ready schedule if -+ * the scheduled frame has been reached already. Otherwise it's placed in the -+ * inactive schedule. If there are no QTDs attached to the QH, the QH is -+ * completely removed from the periodic schedule. -+ */ -+void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, -+ int sched_next_periodic_split) -+{ -+ if (dwc_qh_is_non_per(qh)) { -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ /* Add back to inactive non-periodic schedule. */ -+ dwc_otg_hcd_qh_add(hcd, qh); -+ //hcd->fiq_state->kick_np_queues = 1; -+ } -+ } else { -+ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd); -+ -+ if (qh->do_split) { -+ /* Schedule the next continuing periodic split transfer */ -+ if (sched_next_periodic_split) { -+ -+ qh->sched_frame = frame_number; -+ -+ if (dwc_frame_num_le(frame_number, -+ dwc_frame_num_inc -+ (qh->start_split_frame, -+ 1))) { -+ /* -+ * Allow one frame to elapse after start -+ * split microframe before scheduling -+ * complete split, but DONT if we are -+ * doing the next start split in the -+ * same frame for an ISOC out. -+ */ -+ if ((qh->ep_type != UE_ISOCHRONOUS) || -+ (qh->ep_is_in != 0)) { -+ qh->sched_frame = -+ dwc_frame_num_inc(qh->sched_frame, 1); -+ } -+ } -+ } else { -+ qh->sched_frame = -+ dwc_frame_num_inc(qh->start_split_frame, -+ qh->interval); -+ if (dwc_frame_num_le -+ (qh->sched_frame, frame_number)) { -+ qh->sched_frame = frame_number; -+ } -+ qh->sched_frame |= 0x7; -+ qh->start_split_frame = qh->sched_frame; -+ } -+ } else { -+ qh->sched_frame = -+ dwc_frame_num_inc(qh->sched_frame, qh->interval); -+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { -+ qh->sched_frame = frame_number; -+ } -+ } -+ -+ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) { -+ dwc_otg_hcd_qh_remove(hcd, qh); -+ } else { -+ /* -+ * Remove from periodic_sched_queued and move to -+ * appropriate queue. -+ */ -+ if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) || -+ (!microframe_schedule && qh->sched_frame == frame_number)) { -+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready, -+ &qh->qh_list_entry); -+ } else { -+ if(fiq_enable && !dwc_frame_num_le(hcd->fiq_state->next_sched_frame, qh->sched_frame)) -+ { -+ hcd->fiq_state->next_sched_frame = qh->sched_frame; -+ } -+ -+ DWC_LIST_MOVE_HEAD -+ (&hcd->periodic_sched_inactive, -+ &qh->qh_list_entry); -+ } -+ } -+ } -+} -+ -+/** -+ * This function allocates and initializes a QTD. -+ * -+ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up -+ * pointing to each other so each pair should have a unique correlation. -+ * @param atomic_alloc Flag to do atomic alloc if needed -+ * -+ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ -+dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc) -+{ -+ dwc_otg_qtd_t *qtd; -+ -+ qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc); -+ if (qtd == NULL) { -+ return NULL; -+ } -+ -+ dwc_otg_hcd_qtd_init(qtd, urb); -+ return qtd; -+} -+ -+/** -+ * Initializes a QTD structure. -+ * -+ * @param qtd The QTD to initialize. -+ * @param urb The URB to use for initialization. */ -+void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb) -+{ -+ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t)); -+ qtd->urb = urb; -+ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) { -+ /* -+ * The only time the QTD data toggle is used is on the data -+ * phase of control transfers. This phase always starts with -+ * DATA1. -+ */ -+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; -+ qtd->control_phase = DWC_OTG_CONTROL_SETUP; -+ } -+ -+ /* start split */ -+ qtd->complete_split = 0; -+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; -+ qtd->isoc_split_offset = 0; -+ qtd->in_process = 0; -+ -+ /* Store the qtd ptr in the urb to reference what QTD. */ -+ urb->qtd = qtd; -+ return; -+} -+ -+/** -+ * This function adds a QTD to the QTD-list of a QH. It will find the correct -+ * QH to place the QTD into. If it does not find a QH, then it will create a -+ * new QH. If the QH to which the QTD is added is not currently scheduled, it -+ * is placed into the proper schedule based on its EP type. -+ * HCD lock must be held and interrupts must be disabled on entry -+ * -+ * @param[in] qtd The QTD to add -+ * @param[in] hcd The DWC HCD structure -+ * @param[out] qh out parameter to return queue head -+ * @param atomic_alloc Flag to do atomic alloc if needed -+ * -+ * @return 0 if successful, negative error code otherwise. -+ */ -+int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, -+ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc) -+{ -+ int retval = 0; -+ dwc_otg_hcd_urb_t *urb = qtd->urb; -+ -+ /* -+ * Get the QH which holds the QTD-list to insert to. Create QH if it -+ * doesn't exist. -+ */ -+ if (*qh == NULL) { -+ *qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc); -+ if (*qh == NULL) { -+ retval = -DWC_E_NO_MEMORY; -+ goto done; -+ } else { -+ if (fiq_enable) -+ hcd->fiq_state->kick_np_queues = 1; -+ } -+ } -+ retval = dwc_otg_hcd_qh_add(hcd, *qh); -+ if (retval == 0) { -+ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd, -+ qtd_list_entry); -+ qtd->qh = *qh; -+ } -+done: -+ -+ return retval; -+} -+ -+#endif /* DWC_DEVICE_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -0,0 +1,188 @@ -+#ifndef _DWC_OS_DEP_H_ -+#define _DWC_OS_DEP_H_ -+ -+/** -+ * @file -+ * -+ * This file contains OS dependent structures. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/errno.h> -+#include <linux/types.h> -+#include <linux/slab.h> -+#include <linux/list.h> -+#include <linux/interrupt.h> -+#include <linux/ctype.h> -+#include <linux/string.h> -+#include <linux/dma-mapping.h> -+#include <linux/jiffies.h> -+#include <linux/delay.h> -+#include <linux/timer.h> -+#include <linux/workqueue.h> -+#include <linux/stat.h> -+#include <linux/pci.h> -+ -+#include <linux/version.h> -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) -+# include <linux/irq.h> -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) -+# include <linux/usb/ch9.h> -+#else -+# include <linux/usb_ch9.h> -+#endif -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) -+# include <linux/usb/gadget.h> -+#else -+# include <linux/usb_gadget.h> -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) -+# include <asm/irq.h> -+#endif -+ -+#ifdef PCI_INTERFACE -+# include <asm/io.h> -+#endif -+ -+#ifdef LM_INTERFACE -+# include <asm/unaligned.h> -+# include <asm/sizes.h> -+# include <asm/param.h> -+# include <asm/io.h> -+# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)) -+# include <asm/arch/hardware.h> -+# include <asm/arch/lm.h> -+# include <asm/arch/irqs.h> -+# include <asm/arch/regs-irq.h> -+# else -+/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure - -+ here we assume that the machine architecture provides definitions -+ in its own header -+*/ -+# include <mach/lm.h> -+# include <mach/hardware.h> -+# endif -+#endif -+ -+#ifdef PLATFORM_INTERFACE -+#include <linux/platform_device.h> -+#include <asm/mach/map.h> -+#endif -+ -+/** The OS page size */ -+#define DWC_OS_PAGE_SIZE PAGE_SIZE -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14) -+typedef int gfp_t; -+#endif -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) -+# define IRQF_SHARED SA_SHIRQ -+#endif -+ -+typedef struct os_dependent { -+ /** Base address returned from ioremap() */ -+ void *base; -+ -+ /** Register offset for Diagnostic API */ -+ uint32_t reg_offset; -+ -+ /** Base address for MPHI peripheral */ -+ void *mphi_base; -+ -+#ifdef LM_INTERFACE -+ struct lm_device *lmdev; -+#elif defined(PCI_INTERFACE) -+ struct pci_dev *pcidev; -+ -+ /** Start address of a PCI region */ -+ resource_size_t rsrc_start; -+ -+ /** Length address of a PCI region */ -+ resource_size_t rsrc_len; -+#elif defined(PLATFORM_INTERFACE) -+ struct platform_device *platformdev; -+#endif -+ -+} os_dependent_t; -+ -+#ifdef __cplusplus -+} -+#endif -+ -+ -+ -+/* Type for the our device on the chosen bus */ -+#if defined(LM_INTERFACE) -+typedef struct lm_device dwc_bus_dev_t; -+#elif defined(PCI_INTERFACE) -+typedef struct pci_dev dwc_bus_dev_t; -+#elif defined(PLATFORM_INTERFACE) -+typedef struct platform_device dwc_bus_dev_t; -+#endif -+ -+/* Helper macro to retrieve drvdata from the device on the chosen bus */ -+#if defined(LM_INTERFACE) -+#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev) -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev) -+#elif defined(PLATFORM_INTERFACE) -+#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev) -+#endif -+ -+/** -+ * Helper macro returning the otg_device structure of a given struct device -+ * -+ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev) -+ */ -+#ifdef LM_INTERFACE -+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ -+ struct lm_device *lm_dev = \ -+ container_of(_dev, struct lm_device, dev); \ -+ _var = lm_get_drvdata(lm_dev); \ -+ } while (0) -+ -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ -+ _var = dev_get_drvdata(_dev); \ -+ } while (0) -+ -+#elif defined(PLATFORM_INTERFACE) -+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \ -+ struct platform_device *platform_dev = \ -+ container_of(_dev, struct platform_device, dev); \ -+ _var = platform_get_drvdata(platform_dev); \ -+ } while (0) -+#endif -+ -+ -+/** -+ * Helper macro returning the struct dev of the given struct os_dependent -+ * -+ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep) -+ */ -+#ifdef LM_INTERFACE -+#define DWC_OTG_OS_GETDEV(_osdep) \ -+ ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev) -+#elif defined(PCI_INTERFACE) -+#define DWC_OTG_OS_GETDEV(_osdep) \ -+ ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev) -+#elif defined(PLATFORM_INTERFACE) -+#define DWC_OTG_OS_GETDEV(_osdep) \ -+ ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev) -+#endif -+ -+ -+ -+ -+#endif /* _DWC_OS_DEP_H_ */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c -@@ -0,0 +1,2725 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ -+ * $Revision: #101 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+/** @file -+ * This file implements PCD Core. All code in this file is portable and doesn't -+ * use any OS specific functions. -+ * PCD Core provides Interface, defined in <code><dwc_otg_pcd_if.h></code> -+ * header file, which can be used to implement OS specific PCD interface. -+ * -+ * An important function of the PCD is managing interrupts generated -+ * by the DWC_otg controller. The implementation of the DWC_otg device -+ * mode interrupt service routines is in dwc_otg_pcd_intr.c. -+ * -+ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). -+ * @todo Does it work when the request size is greater than DEPTSIZ -+ * transfer size -+ * -+ */ -+ -+#include "dwc_otg_pcd.h" -+ -+#ifdef DWC_UTE_CFI -+#include "dwc_otg_cfi.h" -+ -+extern int init_cfi(cfiobject_t * cfiobj); -+#endif -+ -+/** -+ * Choose endpoint from ep arrays using usb_ep structure. -+ */ -+static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) -+{ -+ int i; -+ if (pcd->ep0.priv == handle) { -+ return &pcd->ep0; -+ } -+ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { -+ if (pcd->in_ep[i].priv == handle) -+ return &pcd->in_ep[i]; -+ if (pcd->out_ep[i].priv == handle) -+ return &pcd->out_ep[i]; -+ } -+ -+ return NULL; -+} -+ -+/** -+ * This function completes a request. It call's the request call back. -+ */ -+void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req, -+ int32_t status) -+{ -+ unsigned stopped = ep->stopped; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req); -+ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); -+ -+ /* don't modify queue heads during completion callback */ -+ ep->stopped = 1; -+ /* spin_unlock/spin_lock now done in fops->complete() */ -+ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status, -+ req->actual); -+ -+ if (ep->pcd->request_pending > 0) { -+ --ep->pcd->request_pending; -+ } -+ -+ ep->stopped = stopped; -+ DWC_FREE(req); -+} -+ -+/** -+ * This function terminates all the requsts in the EP request queue. -+ */ -+void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_pcd_request_t *req; -+ -+ ep->stopped = 1; -+ -+ /* called with irqs blocked?? */ -+ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN); -+ } -+} -+ -+void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, -+ const struct dwc_otg_pcd_function_ops *fops) -+{ -+ pcd->fops = fops; -+} -+ -+/** -+ * PCD Callback function for initializing the PCD when switching to -+ * device mode. -+ * -+ * @param p void pointer to the <code>dwc_otg_pcd_t</code> -+ */ -+static int32_t dwc_otg_pcd_start_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ /* -+ * Initialized the Core for Device mode. -+ */ -+ if (dwc_otg_is_device_mode(core_if)) { -+ dwc_otg_core_dev_init(core_if); -+ /* Set core_if's lock pointer to the pcd->lock */ -+ core_if->lock = pcd->lock; -+ } -+ return 1; -+} -+ -+/** CFI-specific buffer allocation function for EP */ -+#ifdef DWC_UTE_CFI -+uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, -+ size_t buflen, int flags) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ ep = get_ep_from_handle(pcd, pep); -+ if (!ep) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen, -+ flags); -+} -+#else -+uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr, -+ size_t buflen, int flags); -+#endif -+ -+/** -+ * PCD Callback function for notifying the PCD when resuming from -+ * suspend. -+ * -+ * @param p void pointer to the <code>dwc_otg_pcd_t</code> -+ */ -+static int32_t dwc_otg_pcd_resume_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ -+ if (pcd->fops->resume) { -+ pcd->fops->resume(pcd); -+ } -+ -+ /* Stop the SRP timeout timer. */ -+ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) -+ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { -+ if (GET_CORE_IF(pcd)->srp_timer_started) { -+ GET_CORE_IF(pcd)->srp_timer_started = 0; -+ DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer); -+ } -+ } -+ return 1; -+} -+ -+/** -+ * PCD Callback function for notifying the PCD device is suspended. -+ * -+ * @param p void pointer to the <code>dwc_otg_pcd_t</code> -+ */ -+static int32_t dwc_otg_pcd_suspend_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ -+ if (pcd->fops->suspend) { -+ DWC_SPINUNLOCK(pcd->lock); -+ pcd->fops->suspend(pcd); -+ DWC_SPINLOCK(pcd->lock); -+ } -+ -+ return 1; -+} -+ -+/** -+ * PCD Callback function for stopping the PCD when switching to Host -+ * mode. -+ * -+ * @param p void pointer to the <code>dwc_otg_pcd_t</code> -+ */ -+static int32_t dwc_otg_pcd_stop_cb(void *p) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p; -+ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd); -+ -+ dwc_otg_pcd_stop(pcd); -+ return 1; -+} -+ -+/** -+ * PCD Callback structure for handling mode switching. -+ */ -+static dwc_otg_cil_callbacks_t pcd_callbacks = { -+ .start = dwc_otg_pcd_start_cb, -+ .stop = dwc_otg_pcd_stop_cb, -+ .suspend = dwc_otg_pcd_suspend_cb, -+ .resume_wakeup = dwc_otg_pcd_resume_cb, -+ .p = 0, /* Set at registration */ -+}; -+ -+/** -+ * This function allocates a DMA Descriptor chain for the Endpoint -+ * buffer to be used for a transfer to/from the specified endpoint. -+ */ -+dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(struct device *dev, -+ dwc_dma_t * dma_desc_addr, -+ uint32_t count) -+{ -+ return DWC_DMA_ALLOC_ATOMIC(dev, count * sizeof(dwc_otg_dev_dma_desc_t), -+ dma_desc_addr); -+} -+ -+/** -+ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. -+ */ -+void dwc_otg_ep_free_desc_chain(struct device *dev, -+ dwc_otg_dev_dma_desc_t * desc_addr, -+ uint32_t dma_desc_addr, uint32_t count) -+{ -+ DWC_DMA_FREE(dev, count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr, -+ dma_desc_addr); -+} -+ -+#ifdef DWC_EN_ISOC -+ -+/** -+ * This function initializes a descriptor chain for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * dwc_ep) -+{ -+ -+ dsts_data_t dsts = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ int i, j; -+ uint32_t len; -+ -+ if (dwc_ep->is_in) -+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; -+ else -+ dwc_ep->desc_cnt = -+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / -+ dwc_ep->bInterval; -+ -+ /** Allocate descriptors for double buffering */ -+ dwc_ep->iso_desc_addr = -+ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr, -+ dwc_ep->desc_cnt * 2); -+ if (dwc_ep->desc_addr) { -+ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); -+ return; -+ } -+ -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ /** ISO OUT EP */ -+ if (dwc_ep->is_in == 0) { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; -+ dma_addr_t dma_ad; -+ uint32_t data_per_desc; -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[dwc_ep->num]; -+ int offset; -+ -+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; -+ dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma)); -+ -+ /** Buffer 0 descriptors setup */ -+ dma_ad = dwc_ep->dma_addr0; -+ -+ sts.b_iso_out.bs = BS_HOST_READY; -+ sts.b_iso_out.rxsts = 0; -+ sts.b_iso_out.l = 0; -+ sts.b_iso_out.sp = 0; -+ sts.b_iso_out.ioc = 0; -+ sts.b_iso_out.pid = 0; -+ sts.b_iso_out.framenum = 0; -+ -+ offset = 0; -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ uint32_t len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ } -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ uint32_t len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ -+ sts.b_iso_out.ioc = 1; -+ len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ dma_desc++; -+ -+ /** Buffer 1 descriptors setup */ -+ sts.b_iso_out.ioc = 0; -+ dma_ad = dwc_ep->dma_addr1; -+ -+ offset = 0; -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ uint32_t len = (j + 1) * dwc_ep->maxpacket; -+ if (len > dwc_ep->data_per_frame) -+ data_per_desc = -+ dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket; -+ else -+ data_per_desc = dwc_ep->maxpacket; -+ len = data_per_desc % 4; -+ if (len) -+ data_per_desc += 4 - len; -+ -+ data_per_desc = -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ } -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ -+ sts.b_iso_out.ioc = 1; -+ sts.b_iso_out.l = 1; -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dwc_ep->next_frame = 0; -+ -+ /** Write dma_ad into DOEPDMA register */ -+ DWC_WRITE_REG32(&(out_regs->doepdma), -+ (uint32_t) dwc_ep->iso_dma_desc_addr); -+ -+ } -+ /** ISO IN EP */ -+ else { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr; -+ dma_addr_t dma_ad; -+ dwc_otg_dev_in_ep_regs_t *in_regs = -+ core_if->dev_if->in_ep_regs[dwc_ep->num]; -+ unsigned int frmnumber; -+ fifosize_data_t txfifosize, rxfifosize; -+ -+ txfifosize.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]-> -+ dtxfsts); -+ rxfifosize.d32 = -+ DWC_READ_REG32(&core_if->core_global_regs->grxfsiz); -+ -+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ -+ dma_ad = dwc_ep->dma_addr0; -+ -+ dsts.d32 = -+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ sts.b_iso_in.bs = BS_HOST_READY; -+ sts.b_iso_in.txsts = 0; -+ sts.b_iso_in.sp = -+ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0; -+ sts.b_iso_in.ioc = 0; -+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; -+ -+ frmnumber = dwc_ep->next_frame; -+ -+ sts.b_iso_in.framenum = frmnumber; -+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; -+ sts.b_iso_in.l = 0; -+ -+ /** Buffer 0 descriptors setup */ -+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ dma_desc++; -+ -+ dma_ad += dwc_ep->data_per_frame; -+ sts.b_iso_in.framenum += dwc_ep->bInterval; -+ } -+ -+ sts.b_iso_in.ioc = 1; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ ++dma_desc; -+ -+ /** Buffer 1 descriptors setup */ -+ sts.b_iso_in.ioc = 0; -+ dma_ad = dwc_ep->dma_addr1; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ dma_desc++; -+ -+ dma_ad += dwc_ep->data_per_frame; -+ sts.b_iso_in.framenum += dwc_ep->bInterval; -+ -+ sts.b_iso_in.ioc = 0; -+ } -+ sts.b_iso_in.ioc = 1; -+ sts.b_iso_in.l = 1; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; -+ -+ /** Write dma_ad into diepdma register */ -+ DWC_WRITE_REG32(&(in_regs->diepdma), -+ (uint32_t) dwc_ep->iso_dma_desc_addr); -+ } -+ /** Enable endpoint, clear nak */ -+ depctl.d32 = 0; -+ depctl.b.epena = 1; -+ depctl.b.usbactep = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); -+ depctl.d32 = DWC_READ_REG32(addr); -+} -+ -+/** -+ * This function initializes a descriptor chain for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ -+ if (ep->is_in) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ } -+ -+ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) { -+ return; -+ } else { -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ -+ ep->xfer_len = -+ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; -+ ep->pkt_cnt = -+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; -+ ep->xfer_count = 0; -+ ep->xfer_buff = -+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; -+ ep->dma_addr = -+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; -+ -+ if (ep->is_in) { -+ /* Program the transfer size and packet count -+ * as follows: xfersize = N * maxpacket + -+ * short_packet pktcnt = N + (short_packet -+ * exist ? 1 : 0) -+ */ -+ deptsiz.b.mc = ep->pkt_per_frm; -+ deptsiz.b.xfersize = ep->xfer_len; -+ deptsiz.b.pktcnt = -+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ dieptsiz, deptsiz.d32); -+ -+ /* Write the DMA register */ -+ DWC_WRITE_REG32(& -+ (core_if->dev_if->in_ep_regs[ep->num]-> -+ diepdma), (uint32_t) ep->dma_addr); -+ -+ } else { -+ deptsiz.b.pktcnt = -+ (ep->xfer_len + (ep->maxpacket - 1)) / -+ ep->maxpacket; -+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; -+ -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> -+ doeptsiz, deptsiz.d32); -+ -+ /* Write the DMA register */ -+ DWC_WRITE_REG32(& -+ (core_if->dev_if->out_ep_regs[ep->num]-> -+ doepdma), (uint32_t) ep->dma_addr); -+ -+ } -+ /** Enable endpoint, clear nak */ -+ depctl.d32 = 0; -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); -+ } -+} -+ -+/** -+ * This function does the setup for a data transfer for an EP and -+ * starts the transfer. For an IN transfer, the packets will be -+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, -+ * the packets are unloaded from the Rx FIFO in the ISR. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+ -+static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * ep) -+{ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ if (ep->is_in) { -+ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; -+ } else { -+ ep->desc_cnt = ep->pkt_cnt; -+ } -+ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); -+ } else { -+ if (core_if->pti_enh_enable) { -+ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); -+ } else { -+ ep->cur_pkt_addr = -+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep-> -+ xfer_buff0; -+ ep->cur_pkt_dma_addr = -+ (ep->proc_buf_num) ? ep->dma_addr1 : ep-> -+ dma_addr0; -+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); -+ } -+ } -+ } else { -+ ep->cur_pkt_addr = -+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; -+ ep->cur_pkt_dma_addr = -+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; -+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); -+ } -+} -+ -+/** -+ * This function stops transfer for an EP and -+ * resets the ep's variables. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ */ -+ -+void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ depctl_data_t depctl = {.d32 = 0 }; -+ volatile uint32_t *addr; -+ -+ if (ep->is_in == 1) { -+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; -+ } else { -+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; -+ } -+ -+ /* disable the ep */ -+ depctl.d32 = DWC_READ_REG32(addr); -+ -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ -+ DWC_WRITE_REG32(addr, depctl.d32); -+ -+ if (core_if->dma_desc_enable && -+ ep->iso_desc_addr && ep->iso_dma_desc_addr) { -+ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr, -+ ep->iso_dma_desc_addr, -+ ep->desc_cnt * 2); -+ } -+ -+ /* reset varibales */ -+ ep->dma_addr0 = 0; -+ ep->dma_addr1 = 0; -+ ep->xfer_buff0 = 0; -+ ep->xfer_buff1 = 0; -+ ep->data_per_frame = 0; -+ ep->data_pattern_frame = 0; -+ ep->sync_frame = 0; -+ ep->buf_proc_intrvl = 0; -+ ep->bInterval = 0; -+ ep->proc_buf_num = 0; -+ ep->pkt_per_frm = 0; -+ ep->pkt_per_frm = 0; -+ ep->desc_cnt = 0; -+ ep->iso_desc_addr = 0; -+ ep->iso_dma_desc_addr = 0; -+} -+ -+int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0, -+ dwc_dma_t dma1, int sync_frame, int dp_frame, -+ int data_per_frame, int start_frame, -+ int buf_proc_intrvl, void *req_handle, -+ int atomic_alloc) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags = 0; -+ dwc_ep_t *dwc_ep; -+ int32_t frm_data; -+ dsts_data_t dsts; -+ dwc_otg_core_if_t *core_if; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ core_if = GET_CORE_IF(pcd); -+ dwc_ep = &ep->dwc_ep; -+ -+ if (ep->iso_req_handle) { -+ DWC_WARN("ISO request in progress\n"); -+ } -+ -+ dwc_ep->dma_addr0 = dma0; -+ dwc_ep->dma_addr1 = dma1; -+ -+ dwc_ep->xfer_buff0 = buf0; -+ dwc_ep->xfer_buff1 = buf1; -+ -+ dwc_ep->data_per_frame = data_per_frame; -+ -+ /** @todo - pattern data support is to be implemented in the future */ -+ dwc_ep->data_pattern_frame = dp_frame; -+ dwc_ep->sync_frame = sync_frame; -+ -+ dwc_ep->buf_proc_intrvl = buf_proc_intrvl; -+ -+ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); -+ -+ dwc_ep->proc_buf_num = 0; -+ -+ dwc_ep->pkt_per_frm = 0; -+ frm_data = ep->dwc_ep.data_per_frame; -+ while (frm_data > 0) { -+ dwc_ep->pkt_per_frm++; -+ frm_data -= ep->dwc_ep.maxpacket; -+ } -+ -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ if (start_frame == -1) { -+ dwc_ep->next_frame = dsts.b.soffn + 1; -+ if (dwc_ep->bInterval != 1) { -+ dwc_ep->next_frame = -+ dwc_ep->next_frame + (dwc_ep->bInterval - 1 - -+ dwc_ep->next_frame % -+ dwc_ep->bInterval); -+ } -+ } else { -+ dwc_ep->next_frame = start_frame; -+ } -+ -+ if (!core_if->pti_enh_enable) { -+ dwc_ep->pkt_cnt = -+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / -+ dwc_ep->bInterval; -+ } else { -+ dwc_ep->pkt_cnt = -+ (dwc_ep->data_per_frame * -+ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) -+ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; -+ } -+ -+ if (core_if->dma_desc_enable) { -+ dwc_ep->desc_cnt = -+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / -+ dwc_ep->bInterval; -+ } -+ -+ if (atomic_alloc) { -+ dwc_ep->pkt_info = -+ DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); -+ } else { -+ dwc_ep->pkt_info = -+ DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); -+ } -+ if (!dwc_ep->pkt_info) { -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_NO_MEMORY; -+ } -+ if (core_if->pti_enh_enable) { -+ dwc_memset(dwc_ep->pkt_info, 0, -+ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); -+ } -+ -+ dwc_ep->cur_pkt = 0; -+ ep->iso_req_handle = req_handle; -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); -+ return 0; -+} -+ -+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle) -+{ -+ dwc_irqflags_t flags = 0; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep || !ep->desc || ep->dwc_ep.num == 0) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ dwc_ep = &ep->dwc_ep; -+ -+ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); -+ -+ DWC_FREE(dwc_ep->pkt_info); -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ if (ep->iso_req_handle != req_handle) { -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ ep->iso_req_handle = 0; -+ return 0; -+} -+ -+/** -+ * This function is used for perodical data exchnage between PCD and gadget drivers. -+ * for Isochronous EPs -+ * -+ * - Every time a sync period completes this function is called to -+ * perform data exchange between PCD and gadget -+ */ -+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, -+ void *req_handle) -+{ -+ int i; -+ dwc_ep_t *dwc_ep; -+ -+ dwc_ep = &ep->dwc_ep; -+ -+ DWC_SPINUNLOCK(ep->pcd->lock); -+ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle, -+ dwc_ep->proc_buf_num ^ 0x1); -+ DWC_SPINLOCK(ep->pcd->lock); -+ -+ for (i = 0; i < dwc_ep->pkt_cnt; ++i) { -+ dwc_ep->pkt_info[i].status = 0; -+ dwc_ep->pkt_info[i].offset = 0; -+ dwc_ep->pkt_info[i].length = 0; -+ } -+} -+ -+int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *iso_req_handle) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep->desc || ep->dwc_ep.num == 0) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ dwc_ep = &ep->dwc_ep; -+ -+ return dwc_ep->pkt_cnt; -+} -+ -+void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *iso_req_handle, int packet, -+ int *status, int *actual, int *offset) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep) -+ DWC_WARN("bad ep\n"); -+ -+ dwc_ep = &ep->dwc_ep; -+ -+ *status = dwc_ep->pkt_info[packet].status; -+ *actual = dwc_ep->pkt_info[packet].length; -+ *offset = dwc_ep->pkt_info[packet].offset; -+} -+ -+#endif /* DWC_EN_ISOC */ -+ -+static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep, -+ uint32_t is_in, uint32_t ep_num) -+{ -+ /* Init EP structure */ -+ pcd_ep->desc = 0; -+ pcd_ep->pcd = pcd; -+ pcd_ep->stopped = 1; -+ pcd_ep->queue_sof = 0; -+ -+ /* Init DWC ep structure */ -+ pcd_ep->dwc_ep.is_in = is_in; -+ pcd_ep->dwc_ep.num = ep_num; -+ pcd_ep->dwc_ep.active = 0; -+ pcd_ep->dwc_ep.tx_fifo_num = 0; -+ /* Control until ep is actvated */ -+ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; -+ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; -+ pcd_ep->dwc_ep.dma_addr = 0; -+ pcd_ep->dwc_ep.start_xfer_buff = 0; -+ pcd_ep->dwc_ep.xfer_buff = 0; -+ pcd_ep->dwc_ep.xfer_len = 0; -+ pcd_ep->dwc_ep.xfer_count = 0; -+ pcd_ep->dwc_ep.sent_zlp = 0; -+ pcd_ep->dwc_ep.total_len = 0; -+ pcd_ep->dwc_ep.desc_addr = 0; -+ pcd_ep->dwc_ep.dma_desc_addr = 0; -+ DWC_CIRCLEQ_INIT(&pcd_ep->queue); -+} -+ -+/** -+ * Initialize ep's -+ */ -+static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd) -+{ -+ int i; -+ uint32_t hwcfg1; -+ dwc_otg_pcd_ep_t *ep; -+ int in_ep_cntr, out_ep_cntr; -+ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; -+ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; -+ -+ /** -+ * Initialize the EP0 structure. -+ */ -+ ep = &pcd->ep0; -+ dwc_otg_pcd_init_ep(pcd, ep, 0, 0); -+ -+ in_ep_cntr = 0; -+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; -+ for (i = 1; in_ep_cntr < num_in_eps; i++) { -+ if ((hwcfg1 & 0x1) == 0) { -+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; -+ in_ep_cntr++; -+ /** -+ * @todo NGS: Add direction to EP, based on contents -+ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? -+ * sprintf(";r -+ */ -+ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i); -+ -+ DWC_CIRCLEQ_INIT(&ep->queue); -+ } -+ hwcfg1 >>= 2; -+ } -+ -+ out_ep_cntr = 0; -+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; -+ for (i = 1; out_ep_cntr < num_out_eps; i++) { -+ if ((hwcfg1 & 0x1) == 0) { -+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; -+ out_ep_cntr++; -+ /** -+ * @todo NGS: Add direction to EP, based on contents -+ * of HWCFG1. Need a copy of HWCFG1 in pcd structure? -+ * sprintf(";r -+ */ -+ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i); -+ DWC_CIRCLEQ_INIT(&ep->queue); -+ } -+ hwcfg1 >>= 2; -+ } -+ -+ pcd->ep0state = EP0_DISCONNECT; -+ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; -+ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; -+} -+ -+/** -+ * This function is called when the SRP timer expires. The SRP should -+ * complete within 6 seconds. -+ */ -+static void srp_timeout(void *ptr) -+{ -+ gotgctl_data_t gotgctl; -+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr; -+ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; -+ -+ gotgctl.d32 = DWC_READ_REG32(addr); -+ -+ core_if->srp_timer_started = 0; -+ -+ if (core_if->adp_enable) { -+ if (gotgctl.b.bsesvld == 0) { -+ gpwrdn_data_t gpwrdn = {.d32 = 0 }; -+ DWC_PRINTF("SRP Timeout BSESSVLD = 0\n"); -+ /* Power off the core */ -+ if (core_if->power_down == 2) { -+ gpwrdn.b.pwrdnswtch = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ } -+ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuintsel = 1; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, -+ gpwrdn.d32); -+ dwc_otg_adp_probe_start(core_if); -+ } else { -+ DWC_PRINTF("SRP Timeout BSESSVLD = 1\n"); -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ } -+ } -+ -+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && -+ (core_if->core_params->i2c_enable)) { -+ DWC_PRINTF("SRP Timeout\n"); -+ -+ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) { -+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { -+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); -+ } -+ -+ /* Clear Session Request */ -+ gotgctl.d32 = 0; -+ gotgctl.b.sesreq = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, -+ gotgctl.d32, 0); -+ -+ core_if->srp_success = 0; -+ } else { -+ __DWC_ERROR("Device not connected/responding\n"); -+ gotgctl.b.sesreq = 0; -+ DWC_WRITE_REG32(addr, gotgctl.d32); -+ } -+ } else if (gotgctl.b.sesreq) { -+ DWC_PRINTF("SRP Timeout\n"); -+ -+ __DWC_ERROR("Device not connected/responding\n"); -+ gotgctl.b.sesreq = 0; -+ DWC_WRITE_REG32(addr, gotgctl.d32); -+ } else { -+ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32); -+ } -+} -+ -+/** -+ * Tasklet -+ * -+ */ -+extern void start_next_request(dwc_otg_pcd_ep_t * ep); -+ -+static void start_xfer_tasklet_func(void *data) -+{ -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ int i; -+ depctl_data_t diepctl; -+ -+ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); -+ -+ diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl); -+ -+ if (pcd->ep0.queue_sof) { -+ pcd->ep0.queue_sof = 0; -+ start_next_request(&pcd->ep0); -+ // break; -+ } -+ -+ for (i = 0; i < core_if->dev_if->num_in_eps; i++) { -+ depctl_data_t diepctl; -+ diepctl.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl); -+ -+ if (pcd->in_ep[i].queue_sof) { -+ pcd->in_ep[i].queue_sof = 0; -+ start_next_request(&pcd->in_ep[i]); -+ // break; -+ } -+ } -+ -+ return; -+} -+ -+/** -+ * This function initialized the PCD portion of the driver. -+ * -+ */ -+dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev) -+{ -+ struct device *dev = &otg_dev->os_dep.platformdev->dev; -+ dwc_otg_core_if_t *core_if = otg_dev->core_if; -+ dwc_otg_pcd_t *pcd = NULL; -+ dwc_otg_dev_if_t *dev_if; -+ int i; -+ -+ /* -+ * Allocate PCD structure -+ */ -+ pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t)); -+ -+ if (pcd == NULL) { -+ return NULL; -+ } -+ -+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)) -+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(pcd->lock); -+#else -+ pcd->lock = DWC_SPINLOCK_ALLOC(); -+#endif -+ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n", -+ pcd, core_if);//GRAYG -+ if (!pcd->lock) { -+ DWC_ERROR("Could not allocate lock for pcd"); -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ /* Set core_if's lock pointer to hcd->lock */ -+ core_if->lock = pcd->lock; -+ pcd->core_if = core_if; -+ -+ dev_if = core_if->dev_if; -+ dev_if->isoc_ep = NULL; -+ -+ if (core_if->hwcfg4.b.ded_fifo_en) { -+ DWC_PRINTF("Dedicated Tx FIFOs mode\n"); -+ } else { -+ DWC_PRINTF("Shared Tx FIFO mode\n"); -+ } -+ -+ /* -+ * Initialized the Core for Device mode here if there is nod ADP support. -+ * Otherwise it will be done later in dwc_otg_adp_start routine. -+ */ -+ if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) { -+ dwc_otg_core_dev_init(core_if); -+ } -+ -+ /* -+ * Register the PCD Callbacks. -+ */ -+ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); -+ -+ /* -+ * Initialize the DMA buffer for SETUP packets -+ */ -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ pcd->setup_pkt = -+ DWC_DMA_ALLOC(dev, sizeof(*pcd->setup_pkt) * 5, -+ &pcd->setup_pkt_dma_handle); -+ if (pcd->setup_pkt == NULL) { -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ -+ pcd->status_buf = -+ DWC_DMA_ALLOC(dev, sizeof(uint16_t), -+ &pcd->status_buf_dma_handle); -+ if (pcd->status_buf == NULL) { -+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, -+ pcd->setup_pkt, pcd->setup_pkt_dma_handle); -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ dev_if->setup_desc_addr[0] = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_setup_desc_addr[0], 1); -+ dev_if->setup_desc_addr[1] = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_setup_desc_addr[1], 1); -+ dev_if->in_desc_addr = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_in_desc_addr, 1); -+ dev_if->out_desc_addr = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &dev_if->dma_out_desc_addr, 1); -+ pcd->data_terminated = 0; -+ -+ if (dev_if->setup_desc_addr[0] == 0 -+ || dev_if->setup_desc_addr[1] == 0 -+ || dev_if->in_desc_addr == 0 -+ || dev_if->out_desc_addr == 0) { -+ -+ if (dev_if->out_desc_addr) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->out_desc_addr, -+ dev_if->dma_out_desc_addr, 1); -+ if (dev_if->in_desc_addr) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->in_desc_addr, -+ dev_if->dma_in_desc_addr, 1); -+ if (dev_if->setup_desc_addr[1]) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[1], -+ dev_if->dma_setup_desc_addr[1], 1); -+ if (dev_if->setup_desc_addr[0]) -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[0], -+ dev_if->dma_setup_desc_addr[0], 1); -+ -+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, -+ pcd->setup_pkt, -+ pcd->setup_pkt_dma_handle); -+ DWC_DMA_FREE(dev, sizeof(*pcd->status_buf), -+ pcd->status_buf, -+ pcd->status_buf_dma_handle); -+ -+ DWC_FREE(pcd); -+ -+ return NULL; -+ } -+ } -+ } else { -+ pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5); -+ if (pcd->setup_pkt == NULL) { -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ -+ pcd->status_buf = DWC_ALLOC(sizeof(uint16_t)); -+ if (pcd->status_buf == NULL) { -+ DWC_FREE(pcd->setup_pkt); -+ DWC_FREE(pcd); -+ return NULL; -+ } -+ } -+ -+ dwc_otg_pcd_reinit(pcd); -+ -+ /* Allocate the cfi object for the PCD */ -+#ifdef DWC_UTE_CFI -+ pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t)); -+ if (NULL == pcd->cfi) -+ goto fail; -+ if (init_cfi(pcd->cfi)) { -+ CFI_INFO("%s: Failed to init the CFI object\n", __func__); -+ goto fail; -+ } -+#endif -+ -+ /* Initialize tasklets */ -+ pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet", -+ start_xfer_tasklet_func, pcd); -+ pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet", -+ do_test_mode, pcd); -+ -+ /* Initialize SRP timer */ -+ core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if); -+ -+ if (core_if->core_params->dev_out_nak) { -+ /** -+ * Initialize xfer timeout timer. Implemented for -+ * 2.93a feature "Device DDMA OUT NAK Enhancement" -+ */ -+ for(i = 0; i < MAX_EPS_CHANNELS; i++) { -+ pcd->core_if->ep_xfer_timer[i] = -+ DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout, -+ &pcd->core_if->ep_xfer_info[i]); -+ } -+ } -+ -+ return pcd; -+#ifdef DWC_UTE_CFI -+fail: -+#endif -+ if (pcd->setup_pkt) -+ DWC_FREE(pcd->setup_pkt); -+ if (pcd->status_buf) -+ DWC_FREE(pcd->status_buf); -+#ifdef DWC_UTE_CFI -+ if (pcd->cfi) -+ DWC_FREE(pcd->cfi); -+#endif -+ if (pcd) -+ DWC_FREE(pcd); -+ return NULL; -+ -+} -+ -+/** -+ * Remove PCD specific data -+ */ -+void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ int i; -+ -+ if (pcd->core_if->core_params->dev_out_nak) { -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]); -+ pcd->core_if->ep_xfer_info[i].state = 0; -+ } -+ } -+ -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt, -+ pcd->setup_pkt_dma_handle); -+ DWC_DMA_FREE(dev, sizeof(uint16_t), pcd->status_buf, -+ pcd->status_buf_dma_handle); -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[0], -+ dev_if->dma_setup_desc_addr -+ [0], 1); -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->setup_desc_addr[1], -+ dev_if->dma_setup_desc_addr -+ [1], 1); -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->in_desc_addr, -+ dev_if->dma_in_desc_addr, 1); -+ dwc_otg_ep_free_desc_chain(dev, -+ dev_if->out_desc_addr, -+ dev_if->dma_out_desc_addr, -+ 1); -+ } -+ } else { -+ DWC_FREE(pcd->setup_pkt); -+ DWC_FREE(pcd->status_buf); -+ } -+ DWC_SPINLOCK_FREE(pcd->lock); -+ /* Set core_if's lock pointer to NULL */ -+ pcd->core_if->lock = NULL; -+ -+ DWC_TASK_FREE(pcd->start_xfer_tasklet); -+ DWC_TASK_FREE(pcd->test_mode_tasklet); -+ if (pcd->core_if->core_params->dev_out_nak) { -+ for (i = 0; i < MAX_EPS_CHANNELS; i++) { -+ if (pcd->core_if->ep_xfer_timer[i]) { -+ DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]); -+ } -+ } -+ } -+ -+/* Release the CFI object's dynamic memory */ -+#ifdef DWC_UTE_CFI -+ if (pcd->cfi->ops.release) { -+ pcd->cfi->ops.release(pcd->cfi); -+ } -+#endif -+ -+ DWC_FREE(pcd); -+} -+ -+/** -+ * Returns whether registered pcd is dual speed or not -+ */ -+uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) || -+ ((core_if->hwcfg2.b.hs_phy_type == 2) && -+ (core_if->hwcfg2.b.fs_phy_type == 1) && -+ (core_if->core_params->ulpi_fs_ls))) { -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/** -+ * Returns whether registered pcd is OTG capable or not -+ */ -+uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ gusbcfg_data_t usbcfg = {.d32 = 0 }; -+ -+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg); -+ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) { -+ return 0; -+ } -+ -+ return 1; -+} -+ -+/** -+ * This function assigns periodic Tx FIFO to an periodic EP -+ * in shared Tx FIFO mode -+ */ -+static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t TxMsk = 1; -+ int i; -+ -+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) { -+ if ((TxMsk & core_if->tx_msk) == 0) { -+ core_if->tx_msk |= TxMsk; -+ return i + 1; -+ } -+ TxMsk <<= 1; -+ } -+ return 0; -+} -+ -+/** -+ * This function assigns periodic Tx FIFO to an periodic EP -+ * in shared Tx FIFO mode -+ */ -+static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if) -+{ -+ uint32_t PerTxMsk = 1; -+ int i; -+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) { -+ if ((PerTxMsk & core_if->p_tx_msk) == 0) { -+ core_if->p_tx_msk |= PerTxMsk; -+ return i + 1; -+ } -+ PerTxMsk <<= 1; -+ } -+ return 0; -+} -+ -+/** -+ * This function releases periodic Tx FIFO -+ * in shared Tx FIFO mode -+ */ -+static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if, -+ uint32_t fifo_num) -+{ -+ core_if->p_tx_msk = -+ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; -+} -+ -+/** -+ * This function releases periodic Tx FIFO -+ * in shared Tx FIFO mode -+ */ -+static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num) -+{ -+ core_if->tx_msk = -+ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; -+} -+ -+/** -+ * This function is being called from gadget -+ * to enable PCD endpoint. -+ */ -+int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, -+ const uint8_t * ep_desc, void *usb_ep) -+{ -+ int num, dir; -+ dwc_otg_pcd_ep_t *ep = NULL; -+ const usb_endpoint_descriptor_t *desc; -+ dwc_irqflags_t flags; -+ fifosize_data_t dptxfsiz = {.d32 = 0 }; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; -+ int retval = 0; -+ int i, epcount; -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ -+ desc = (const usb_endpoint_descriptor_t *)ep_desc; -+ -+ if (!desc) { -+ pcd->ep0.priv = usb_ep; -+ ep = &pcd->ep0; -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ num = UE_GET_ADDR(desc->bEndpointAddress); -+ dir = UE_GET_DIR(desc->bEndpointAddress); -+ -+ if (!desc->wMaxPacketSize) { -+ DWC_WARN("bad maxpacketsize\n"); -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ if (dir == UE_DIR_IN) { -+ epcount = pcd->core_if->dev_if->num_in_eps; -+ for (i = 0; i < epcount; i++) { -+ if (num == pcd->in_ep[i].dwc_ep.num) { -+ ep = &pcd->in_ep[i]; -+ break; -+ } -+ } -+ } else { -+ epcount = pcd->core_if->dev_if->num_out_eps; -+ for (i = 0; i < epcount; i++) { -+ if (num == pcd->out_ep[i].dwc_ep.num) { -+ ep = &pcd->out_ep[i]; -+ break; -+ } -+ } -+ } -+ -+ if (!ep) { -+ DWC_WARN("bad address\n"); -+ retval = -DWC_E_INVALID; -+ goto out; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ ep->desc = desc; -+ ep->priv = usb_ep; -+ -+ /* -+ * Activate the EP -+ */ -+ ep->stopped = 0; -+ -+ ep->dwc_ep.is_in = (dir == UE_DIR_IN); -+ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize); -+ -+ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE; -+ -+ if (ep->dwc_ep.is_in) { -+ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ ep->dwc_ep.tx_fifo_num = 0; -+ -+ if (ep->dwc_ep.type == UE_ISOCHRONOUS) { -+ /* -+ * if ISOC EP then assign a Periodic Tx FIFO. -+ */ -+ ep->dwc_ep.tx_fifo_num = -+ assign_perio_tx_fifo(GET_CORE_IF(pcd)); -+ } -+ } else { -+ /* -+ * if Dedicated FIFOs mode is on then assign a Tx FIFO. -+ */ -+ ep->dwc_ep.tx_fifo_num = -+ assign_tx_fifo(GET_CORE_IF(pcd)); -+ } -+ -+ /* Calculating EP info controller base address */ -+ if (ep->dwc_ep.tx_fifo_num -+ && GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ gdfifocfg.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)-> -+ core_global_regs->gdfifocfg); -+ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; -+ dptxfsiz.d32 = -+ (DWC_READ_REG32 -+ (&GET_CORE_IF(pcd)->core_global_regs-> -+ dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16); -+ gdfifocfg.b.epinfobase = -+ gdfifocfgbase.d32 + dptxfsiz.d32; -+ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> -+ core_global_regs->gdfifocfg, -+ gdfifocfg.d32); -+ } -+ } -+ } -+ /* Set initial data PID. */ -+ if (ep->dwc_ep.type == UE_BULK) { -+ ep->dwc_ep.data_pid_start = 0; -+ } -+ -+ /* Alloc DMA Descriptors */ -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+#ifndef DWC_UTE_PER_IO -+ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { -+#endif -+ ep->dwc_ep.desc_addr = -+ dwc_otg_ep_alloc_desc_chain(dev, -+ &ep->dwc_ep.dma_desc_addr, -+ MAX_DMA_DESC_CNT); -+ if (!ep->dwc_ep.desc_addr) { -+ DWC_WARN("%s, can't allocate DMA descriptor\n", -+ __func__); -+ retval = -DWC_E_SHUTDOWN; -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ goto out; -+ } -+#ifndef DWC_UTE_PER_IO -+ } -+#endif -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n", -+ (ep->dwc_ep.is_in ? "IN" : "OUT"), -+ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); -+#ifdef DWC_UTE_PER_IO -+ ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1); -+#endif -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1); -+ ep->dwc_ep.frame_num = 0xFFFFFFFF; -+ } -+ -+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); -+ -+#ifdef DWC_UTE_CFI -+ if (pcd->cfi->ops.ep_enable) { -+ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep); -+ } -+#endif -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+out: -+ return retval; -+} -+ -+/** -+ * This function is being called from gadget -+ * to disable PCD endpoint. -+ */ -+int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ dwc_otg_dev_dma_desc_t *desc_addr; -+ dwc_dma_t dma_desc_addr; -+ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 }; -+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 }; -+ fifosize_data_t dptxfsiz = {.d32 = 0 }; -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if (!ep || !ep->desc) { -+ DWC_DEBUGPL(DBG_PCD, "bad ep address\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ dwc_otg_request_nuke(ep); -+ -+ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep); -+ if (pcd->core_if->core_params->dev_out_nak) { -+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]); -+ pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0; -+ } -+ ep->desc = NULL; -+ ep->stopped = 1; -+ -+ gdfifocfg.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg); -+ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16; -+ -+ if (ep->dwc_ep.is_in) { -+ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ /* Flush the Tx FIFO */ -+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), -+ ep->dwc_ep.tx_fifo_num); -+ } -+ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); -+ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num); -+ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) { -+ /* Decreasing EPinfo Base Addr */ -+ dptxfsiz.d32 = -+ (DWC_READ_REG32 -+ (&GET_CORE_IF(pcd)-> -+ core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16); -+ gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32; -+ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) { -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg, -+ gdfifocfg.d32); -+ } -+ } -+ } -+ -+ /* Free DMA Descriptors */ -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ if (ep->dwc_ep.type != UE_ISOCHRONOUS) { -+ desc_addr = ep->dwc_ep.desc_addr; -+ dma_desc_addr = ep->dwc_ep.dma_desc_addr; -+ -+ /* Cannot call dma_free_coherent() with IRQs disabled */ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ dwc_otg_ep_free_desc_chain(dev, desc_addr, dma_desc_addr, -+ MAX_DMA_DESC_CNT); -+ -+ goto out_unlocked; -+ } -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+out_unlocked: -+ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT"); -+ return 0; -+ -+} -+ -+/******************************************************************************/ -+#ifdef DWC_UTE_PER_IO -+ -+/** -+ * Free the request and its extended parts -+ * -+ */ -+void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req) -+{ -+ DWC_FREE(req->ext_req.per_io_frame_descs); -+ DWC_FREE(req); -+} -+ -+/** -+ * Start the next request in the endpoint's queue. -+ * -+ */ -+int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd, -+ dwc_otg_pcd_ep_t * ep) -+{ -+ int i; -+ dwc_otg_pcd_request_t *req = NULL; -+ dwc_ep_t *dwcep = NULL; -+ struct dwc_iso_xreq_port *ereq = NULL; -+ struct dwc_iso_pkt_desc_port *ddesc_iso; -+ uint16_t nat; -+ depctl_data_t diepctl; -+ -+ dwcep = &ep->dwc_ep; -+ -+ if (dwcep->xiso_active_xfers > 0) { -+#if 0 //Disable this to decrease s/w overhead that is crucial for Isoc transfers -+ DWC_WARN("There are currently active transfers for EP%d \ -+ (active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers, -+ dwcep->xiso_queued_xfers); -+#endif -+ return 0; -+ } -+ -+ nat = UGETW(ep->desc->wMaxPacketSize); -+ nat = (nat >> 11) & 0x03; -+ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ ereq = &req->ext_req; -+ ep->stopped = 0; -+ -+ /* Get the frame number */ -+ dwcep->xiso_frame_num = -+ dwc_otg_get_frame_number(GET_CORE_IF(pcd)); -+ DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num); -+ -+ ddesc_iso = ereq->per_io_frame_descs; -+ -+ if (dwcep->is_in) { -+ /* Setup DMA Descriptor chain for IN Isoc request */ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ //if ((i % (nat + 1)) == 0) -+ if ( i > 0 ) -+ dwcep->xiso_frame_num = -+ (dwcep->xiso_bInterval + -+ dwcep->xiso_frame_num) & 0x3FFF; -+ dwcep->desc_addr[i].buf = -+ req->dma + ddesc_iso[i].offset; -+ dwcep->desc_addr[i].status.b_iso_in.txbytes = -+ ddesc_iso[i].length; -+ dwcep->desc_addr[i].status.b_iso_in.framenum = -+ dwcep->xiso_frame_num; -+ dwcep->desc_addr[i].status.b_iso_in.bs = -+ BS_HOST_READY; -+ dwcep->desc_addr[i].status.b_iso_in.txsts = 0; -+ dwcep->desc_addr[i].status.b_iso_in.sp = -+ (ddesc_iso[i].length % -+ dwcep->maxpacket) ? 1 : 0; -+ dwcep->desc_addr[i].status.b_iso_in.ioc = 0; -+ dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1; -+ dwcep->desc_addr[i].status.b_iso_in.l = 0; -+ -+ /* Process the last descriptor */ -+ if (i == ereq->pio_pkt_count - 1) { -+ dwcep->desc_addr[i].status.b_iso_in.ioc = 1; -+ dwcep->desc_addr[i].status.b_iso_in.l = 1; -+ } -+ } -+ -+ /* Setup and start the transfer for this endpoint */ -+ dwcep->xiso_active_xfers++; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ in_ep_regs[dwcep->num]->diepdma, -+ dwcep->dma_desc_addr); -+ diepctl.d32 = 0; -+ diepctl.b.epena = 1; -+ diepctl.b.cnak = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ in_ep_regs[dwcep->num]->diepctl, 0, -+ diepctl.d32); -+ } else { -+ /* Setup DMA Descriptor chain for OUT Isoc request */ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ //if ((i % (nat + 1)) == 0) -+ dwcep->xiso_frame_num = (dwcep->xiso_bInterval + -+ dwcep->xiso_frame_num) & 0x3FFF; -+ dwcep->desc_addr[i].buf = -+ req->dma + ddesc_iso[i].offset; -+ dwcep->desc_addr[i].status.b_iso_out.rxbytes = -+ ddesc_iso[i].length; -+ dwcep->desc_addr[i].status.b_iso_out.framenum = -+ dwcep->xiso_frame_num; -+ dwcep->desc_addr[i].status.b_iso_out.bs = -+ BS_HOST_READY; -+ dwcep->desc_addr[i].status.b_iso_out.rxsts = 0; -+ dwcep->desc_addr[i].status.b_iso_out.sp = -+ (ddesc_iso[i].length % -+ dwcep->maxpacket) ? 1 : 0; -+ dwcep->desc_addr[i].status.b_iso_out.ioc = 0; -+ dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1; -+ dwcep->desc_addr[i].status.b_iso_out.l = 0; -+ -+ /* Process the last descriptor */ -+ if (i == ereq->pio_pkt_count - 1) { -+ dwcep->desc_addr[i].status.b_iso_out.ioc = 1; -+ dwcep->desc_addr[i].status.b_iso_out.l = 1; -+ } -+ } -+ -+ /* Setup and start the transfer for this endpoint */ -+ dwcep->xiso_active_xfers++; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->out_ep_regs[dwcep->num]-> -+ doepdma, dwcep->dma_desc_addr); -+ diepctl.d32 = 0; -+ diepctl.b.epena = 1; -+ diepctl.b.cnak = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->out_ep_regs[dwcep->num]-> -+ doepctl, 0, diepctl.d32); -+ } -+ -+ } else { -+ ep->stopped = 1; -+ } -+ -+ return 0; -+} -+ -+/** -+ * - Remove the request from the queue -+ */ -+void complete_xiso_ep(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_pcd_request_t *req = NULL; -+ struct dwc_iso_xreq_port *ereq = NULL; -+ struct dwc_iso_pkt_desc_port *ddesc_iso = NULL; -+ dwc_ep_t *dwcep = NULL; -+ int i; -+ -+ //DWC_DEBUG(); -+ dwcep = &ep->dwc_ep; -+ -+ /* Get the first pending request from the queue */ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (!req) { -+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); -+ return; -+ } -+ dwcep->xiso_active_xfers--; -+ dwcep->xiso_queued_xfers--; -+ /* Remove this request from the queue */ -+ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry); -+ } else { -+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); -+ return; -+ } -+ -+ ep->stopped = 1; -+ ereq = &req->ext_req; -+ ddesc_iso = ereq->per_io_frame_descs; -+ -+ if (dwcep->xiso_active_xfers < 0) { -+ DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num, -+ dwcep->xiso_active_xfers); -+ } -+ -+ /* Fill the Isoc descs of portable extended req from dma descriptors */ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ if (dwcep->is_in) { /* IN endpoints */ -+ ddesc_iso[i].actual_length = ddesc_iso[i].length - -+ dwcep->desc_addr[i].status.b_iso_in.txbytes; -+ ddesc_iso[i].status = -+ dwcep->desc_addr[i].status.b_iso_in.txsts; -+ } else { /* OUT endpoints */ -+ ddesc_iso[i].actual_length = ddesc_iso[i].length - -+ dwcep->desc_addr[i].status.b_iso_out.rxbytes; -+ ddesc_iso[i].status = -+ dwcep->desc_addr[i].status.b_iso_out.rxsts; -+ } -+ } -+ -+ DWC_SPINUNLOCK(ep->pcd->lock); -+ -+ /* Call the completion function in the non-portable logic */ -+ ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0, -+ &req->ext_req); -+ -+ DWC_SPINLOCK(ep->pcd->lock); -+ -+ /* Free the request - specific freeing needed for extended request object */ -+ dwc_pcd_xiso_ereq_free(ep, req); -+ -+ /* Start the next request */ -+ dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep); -+ -+ return; -+} -+ -+/** -+ * Create and initialize the Isoc pkt descriptors of the extended request. -+ * -+ */ -+static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req, -+ void *ereq_nonport, -+ int atomic_alloc) -+{ -+ struct dwc_iso_xreq_port *ereq = NULL; -+ struct dwc_iso_xreq_port *req_mapped = NULL; -+ struct dwc_iso_pkt_desc_port *ipds = NULL; /* To be created in this function */ -+ uint32_t pkt_count; -+ int i; -+ -+ ereq = &req->ext_req; -+ req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport; -+ pkt_count = req_mapped->pio_pkt_count; -+ -+ /* Create the isoc descs */ -+ if (atomic_alloc) { -+ ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count); -+ } else { -+ ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count); -+ } -+ -+ if (!ipds) { -+ DWC_ERROR("Failed to allocate isoc descriptors"); -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Initialize the extended request fields */ -+ ereq->per_io_frame_descs = ipds; -+ ereq->error_count = 0; -+ ereq->pio_alloc_pkt_count = pkt_count; -+ ereq->pio_pkt_count = pkt_count; -+ ereq->tr_sub_flags = req_mapped->tr_sub_flags; -+ -+ /* Init the Isoc descriptors */ -+ for (i = 0; i < pkt_count; i++) { -+ ipds[i].length = req_mapped->per_io_frame_descs[i].length; -+ ipds[i].offset = req_mapped->per_io_frame_descs[i].offset; -+ ipds[i].status = req_mapped->per_io_frame_descs[i].status; /* 0 */ -+ ipds[i].actual_length = -+ req_mapped->per_io_frame_descs[i].actual_length; -+ } -+ -+ return 0; -+} -+ -+static void prn_ext_request(struct dwc_iso_xreq_port *ereq) -+{ -+ struct dwc_iso_pkt_desc_port *xfd = NULL; -+ int i; -+ -+ DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs); -+ DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags); -+ DWC_DEBUG("error_count=%d", ereq->error_count); -+ DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count); -+ DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count); -+ DWC_DEBUG("res=%d", ereq->res); -+ -+ for (i = 0; i < ereq->pio_pkt_count; i++) { -+ xfd = &ereq->per_io_frame_descs[0]; -+ DWC_DEBUG("FD #%d", i); -+ -+ DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length); -+ DWC_DEBUG("xfd->length=%d", xfd->length); -+ DWC_DEBUG("xfd->offset=%d", xfd->offset); -+ DWC_DEBUG("xfd->status=%d", xfd->status); -+ } -+} -+ -+/** -+ * -+ */ -+int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, -+ int zero, void *req_handle, int atomic_alloc, -+ void *ereq_nonport) -+{ -+ dwc_otg_pcd_request_t *req = NULL; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ int res; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ /* We support this extension only for DDMA mode */ -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) -+ if (!GET_CORE_IF(pcd)->dma_desc_enable) -+ return -DWC_E_INVALID; -+ -+ /* Create a dwc_otg_pcd_request_t object */ -+ if (atomic_alloc) { -+ req = DWC_ALLOC_ATOMIC(sizeof(*req)); -+ } else { -+ req = DWC_ALLOC(sizeof(*req)); -+ } -+ -+ if (!req) { -+ return -DWC_E_NO_MEMORY; -+ } -+ -+ /* Create the Isoc descs for this request which shall be the exact match -+ * of the structure sent to us from the non-portable logic */ -+ res = -+ dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc); -+ if (res) { -+ DWC_WARN("Failed to init the Isoc descriptors"); -+ DWC_FREE(req); -+ return res; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); -+ req->buf = buf; -+ req->dma = dma_buf; -+ req->length = buflen; -+ req->sent_zlp = zero; -+ req->priv = req_handle; -+ -+ //DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ ep->dwc_ep.dma_addr = dma_buf; -+ ep->dwc_ep.start_xfer_buff = buf; -+ ep->dwc_ep.xfer_buff = buf; -+ ep->dwc_ep.xfer_len = 0; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = buflen; -+ -+ /* Add this request to the tail */ -+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); -+ ep->dwc_ep.xiso_queued_xfers++; -+ -+//DWC_DEBUG("CP_0"); -+//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags); -+//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport); -+//prn_ext_request(&req->ext_req); -+ -+ //DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ /* If the req->status == ASAP then check if there is any active transfer -+ * for this endpoint. If no active transfers, then get the first entry -+ * from the queue and start that transfer -+ */ -+ if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) { -+ res = dwc_otg_pcd_xiso_start_next_request(pcd, ep); -+ if (res) { -+ DWC_WARN("Failed to start the next Isoc transfer"); -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ DWC_FREE(req); -+ return res; -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return 0; -+} -+ -+#endif -+/* END ifdef DWC_UTE_PER_IO ***************************************************/ -+int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen, -+ int zero, void *req_handle, int atomic_alloc) -+{ -+ struct device *dev = dwc_otg_pcd_to_dev(pcd); -+ dwc_irqflags_t flags; -+ dwc_otg_pcd_request_t *req; -+ dwc_otg_pcd_ep_t *ep; -+ uint32_t max_transfer; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { -+ DWC_WARN("bad ep\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ if (atomic_alloc) { -+ req = DWC_ALLOC_ATOMIC(sizeof(*req)); -+ } else { -+ req = DWC_ALLOC(sizeof(*req)); -+ } -+ -+ if (!req) { -+ return -DWC_E_NO_MEMORY; -+ } -+ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry); -+ if (!GET_CORE_IF(pcd)->core_params->opt) { -+ if (ep->dwc_ep.num != 0) { -+ DWC_ERROR("queue req %p, len %d buf %p\n", -+ req_handle, buflen, buf); -+ } -+ } -+ -+ req->buf = buf; -+ req->dma = dma_buf; -+ req->length = buflen; -+ req->sent_zlp = zero; -+ req->priv = req_handle; -+ req->dw_align_buf = NULL; -+ if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable -+ && !GET_CORE_IF(pcd)->dma_desc_enable) -+ req->dw_align_buf = DWC_DMA_ALLOC(dev, buflen, -+ &req->dw_align_buf_dma); -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ /* -+ * After adding request to the queue for IN ISOC wait for In Token Received -+ * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token -+ * Received when EP is disabled interrupt to obtain starting microframe -+ * (odd/even) start transfer -+ */ -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ if (req != 0) { -+ depctl_data_t depctl = {.d32 = -+ DWC_READ_REG32(&pcd->core_if->dev_if-> -+ in_ep_regs[ep->dwc_ep.num]-> -+ diepctl) }; -+ ++pcd->request_pending; -+ -+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); -+ if (ep->dwc_ep.is_in) { -+ depctl.b.cnak = 1; -+ DWC_WRITE_REG32(&pcd->core_if->dev_if-> -+ in_ep_regs[ep->dwc_ep.num]-> -+ diepctl, depctl.d32); -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ } -+ return 0; -+ } -+ -+ /* -+ * For EP0 IN without premature status, zlp is required? -+ */ -+ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { -+ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num); -+ //_req->zero = 1; -+ } -+ -+ /* Start the transfer */ -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) { -+ /* EP0 Transfer? */ -+ if (ep->dwc_ep.num == 0) { -+ switch (pcd->ep0state) { -+ case EP0_IN_DATA_PHASE: -+ DWC_DEBUGPL(DBG_PCD, -+ "%s ep0: EP0_IN_DATA_PHASE\n", -+ __func__); -+ break; -+ -+ case EP0_OUT_DATA_PHASE: -+ DWC_DEBUGPL(DBG_PCD, -+ "%s ep0: EP0_OUT_DATA_PHASE\n", -+ __func__); -+ if (pcd->request_config) { -+ /* Complete STATUS PHASE */ -+ ep->dwc_ep.is_in = 1; -+ pcd->ep0state = EP0_IN_STATUS_PHASE; -+ } -+ break; -+ -+ case EP0_IN_STATUS_PHASE: -+ DWC_DEBUGPL(DBG_PCD, -+ "%s ep0: EP0_IN_STATUS_PHASE\n", -+ __func__); -+ break; -+ -+ default: -+ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", -+ pcd->ep0state); -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_SHUTDOWN; -+ } -+ -+ ep->dwc_ep.dma_addr = dma_buf; -+ ep->dwc_ep.start_xfer_buff = buf; -+ ep->dwc_ep.xfer_buff = buf; -+ ep->dwc_ep.xfer_len = buflen; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; -+ -+ if (zero) { -+ if ((ep->dwc_ep.xfer_len % -+ ep->dwc_ep.maxpacket == 0) -+ && (ep->dwc_ep.xfer_len != 0)) { -+ ep->dwc_ep.sent_zlp = 1; -+ } -+ -+ } -+ -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } // non-ep0 endpoints -+ else { -+#ifdef DWC_UTE_CFI -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ /* store the request length */ -+ ep->dwc_ep.cfi_req_len = buflen; -+ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, -+ ep, req); -+ } else { -+#endif -+ max_transfer = -+ GET_CORE_IF(ep->pcd)->core_params-> -+ max_transfer_size; -+ -+ /* Setup and start the Transfer */ -+ if (req->dw_align_buf){ -+ if (ep->dwc_ep.is_in) -+ dwc_memcpy(req->dw_align_buf, -+ buf, buflen); -+ ep->dwc_ep.dma_addr = -+ req->dw_align_buf_dma; -+ ep->dwc_ep.start_xfer_buff = -+ req->dw_align_buf; -+ ep->dwc_ep.xfer_buff = -+ req->dw_align_buf; -+ } else { -+ ep->dwc_ep.dma_addr = dma_buf; -+ ep->dwc_ep.start_xfer_buff = buf; -+ ep->dwc_ep.xfer_buff = buf; -+ } -+ ep->dwc_ep.xfer_len = 0; -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = buflen; -+ -+ ep->dwc_ep.maxxfer = max_transfer; -+ if (GET_CORE_IF(pcd)->dma_desc_enable) { -+ uint32_t out_max_xfer = -+ DDMA_MAX_TRANSFER_SIZE - -+ (DDMA_MAX_TRANSFER_SIZE % 4); -+ if (ep->dwc_ep.is_in) { -+ if (ep->dwc_ep.maxxfer > -+ DDMA_MAX_TRANSFER_SIZE) { -+ ep->dwc_ep.maxxfer = -+ DDMA_MAX_TRANSFER_SIZE; -+ } -+ } else { -+ if (ep->dwc_ep.maxxfer > -+ out_max_xfer) { -+ ep->dwc_ep.maxxfer = -+ out_max_xfer; -+ } -+ } -+ } -+ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { -+ ep->dwc_ep.maxxfer -= -+ (ep->dwc_ep.maxxfer % -+ ep->dwc_ep.maxpacket); -+ } -+ -+ if (zero) { -+ if ((ep->dwc_ep.total_len % -+ ep->dwc_ep.maxpacket == 0) -+ && (ep->dwc_ep.total_len != 0)) { -+ ep->dwc_ep.sent_zlp = 1; -+ } -+ } -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } -+ } -+ -+ if (req != 0) { -+ ++pcd->request_pending; -+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry); -+ if (ep->dwc_ep.is_in && ep->stopped -+ && !(GET_CORE_IF(pcd)->dma_enable)) { -+ /** @todo NGS Create a function for this. */ -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.intktxfemp = 1; -+ if (GET_CORE_IF(pcd)->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->dev_global_regs->diepeachintmsk -+ [ep->dwc_ep.num], 0, -+ diepmsk.d32); -+ } else { -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->dev_global_regs-> -+ diepmsk, 0, diepmsk.d32); -+ } -+ -+ } -+ } -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return 0; -+} -+ -+int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle) -+{ -+ dwc_irqflags_t flags; -+ dwc_otg_pcd_request_t *req; -+ dwc_otg_pcd_ep_t *ep; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) { -+ DWC_WARN("bad argument\n"); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ -+ /* make sure it's actually queued on this endpoint */ -+ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) { -+ if (req->priv == (void *)req_handle) { -+ break; -+ } -+ } -+ -+ if (req->priv != (void *)req_handle) { -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ return -DWC_E_INVALID; -+ } -+ -+ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) { -+ dwc_otg_request_done(ep, req, -DWC_E_RESTART); -+ } else { -+ req = NULL; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return req ? 0 : -DWC_E_SHUTDOWN; -+ -+} -+ -+/** -+ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests -+ * -+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) -+ * requests. If the gadget driver clears the halt status, it will -+ * automatically unwedge the endpoint. -+ * -+ * Returns zero on success, else negative DWC error code. -+ */ -+int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ int retval = 0; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if ((!ep->desc && ep != &pcd->ep0) || -+ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { -+ DWC_WARN("%s, bad ep\n", __func__); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT"); -+ retval = -DWC_E_AGAIN; -+ } else { -+ /* This code needs to be reviewed */ -+ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { -+ dtxfsts_data_t txstatus; -+ fifosize_data_t txfifosize; -+ -+ txfifosize.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)-> -+ core_global_regs->dtxfsiz[ep->dwc_ep. -+ tx_fifo_num]); -+ txstatus.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)-> -+ dev_if->in_ep_regs[ep->dwc_ep.num]-> -+ dtxfsts); -+ -+ if (txstatus.b.txfspcavail < txfifosize.b.depth) { -+ DWC_WARN("%s() Data In Tx Fifo\n", __func__); -+ retval = -DWC_E_AGAIN; -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ } -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return retval; -+} -+ -+int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ dwc_irqflags_t flags; -+ int retval = 0; -+ -+ ep = get_ep_from_handle(pcd, ep_handle); -+ -+ if (!ep || (!ep->desc && ep != &pcd->ep0) || -+ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) { -+ DWC_WARN("%s, bad ep\n", __func__); -+ return -DWC_E_INVALID; -+ } -+ -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT"); -+ retval = -DWC_E_AGAIN; -+ } else if (value == 0) { -+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ } else if (value == 1) { -+ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) { -+ dtxfsts_data_t txstatus; -+ fifosize_data_t txfifosize; -+ -+ txfifosize.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs-> -+ dtxfsiz[ep->dwc_ep.tx_fifo_num]); -+ txstatus.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ in_ep_regs[ep->dwc_ep.num]->dtxfsts); -+ -+ if (txstatus.b.txfspcavail < txfifosize.b.depth) { -+ DWC_WARN("%s() Data In Tx Fifo\n", __func__); -+ retval = -DWC_E_AGAIN; -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), -+ &ep->dwc_ep); -+ } -+ } else { -+ if (ep->dwc_ep.num == 0) { -+ pcd->ep0state = EP0_STALL; -+ } -+ -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ } -+ } else if (value == 2) { -+ ep->dwc_ep.stall_clear_flag = 0; -+ } else if (value == 3) { -+ ep->dwc_ep.stall_clear_flag = 1; -+ } -+ -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ -+ return retval; -+} -+ -+/** -+ * This function initiates remote wakeup of the host from suspend state. -+ */ -+void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set) -+{ -+ dctl_data_t dctl = { 0 }; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dsts_data_t dsts; -+ -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ if (!dsts.b.suspsts) { -+ DWC_WARN("Remote wakeup while is not in suspend state\n"); -+ } -+ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */ -+ if (pcd->remote_wakeup_enable) { -+ if (set) { -+ -+ if (core_if->adp_enable) { -+ gpwrdn_data_t gpwrdn; -+ -+ dwc_otg_adp_probe_stop(core_if); -+ -+ /* Mask SRP detected interrupt from Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.srp_det_msk = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ -+ /* Disable Power Down Logic */ -+ gpwrdn.d32 = 0; -+ gpwrdn.b.pmuactv = 1; -+ DWC_MODIFY_REG32(&core_if-> -+ core_global_regs->gpwrdn, -+ gpwrdn.d32, 0); -+ -+ /* -+ * Initialize the Core for Device mode. -+ */ -+ core_if->op_state = B_PERIPHERAL; -+ dwc_otg_core_init(core_if); -+ dwc_otg_enable_global_interrupts(core_if); -+ cil_pcd_start(core_if); -+ -+ dwc_otg_initiate_srp(core_if); -+ } -+ -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, 0, dctl.d32); -+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); -+ -+ dwc_mdelay(2); -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ dctl, dctl.d32, 0); -+ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); -+ } -+ } else { -+ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); -+ } -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+/** -+ * This function initiates remote wakeup of the host from L1 sleep state. -+ */ -+void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set) -+{ -+ glpmcfg_data_t lpmcfg; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ -+ /* Check if we are in L1 state */ -+ if (!lpmcfg.b.prt_sleep_sts) { -+ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n"); -+ return; -+ } -+ -+ /* Check if host allows remote wakeup */ -+ if (!lpmcfg.b.rem_wkup_en) { -+ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n"); -+ return; -+ } -+ -+ /* Check if Resume OK */ -+ if (!lpmcfg.b.sleep_state_resumeok) { -+ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n"); -+ return; -+ } -+ -+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg); -+ lpmcfg.b.en_utmi_sleep = 0; -+ lpmcfg.b.hird_thres &= (~(1 << 4)); -+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32); -+ -+ if (set) { -+ dctl_data_t dctl = {.d32 = 0 }; -+ dctl.b.rmtwkupsig = 1; -+ /* Set RmtWkUpSig bit to start remote wakup signaling. -+ * Hardware will automatically clear this bit. -+ */ -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ 0, dctl.d32); -+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); -+ } -+ -+} -+#endif -+ -+/** -+ * Performs remote wakeup. -+ */ -+void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_irqflags_t flags; -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ if (core_if->lx_state == DWC_OTG_L1) { -+ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set); -+ } else { -+#endif -+ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set); -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ } -+#endif -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+ } -+ return; -+} -+ -+void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dctl_data_t dctl = { 0 }; -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ dctl.b.sftdiscon = 1; -+ DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs); -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); -+ dwc_udelay(no_of_usecs); -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0); -+ -+ } else{ -+ DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n"); -+ } -+ return; -+ -+} -+ -+int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd) -+{ -+ dsts_data_t dsts; -+ gotgctl_data_t gotgctl; -+ -+ /* -+ * This function starts the Protocol if no session is in progress. If -+ * a session is already in progress, but the device is suspended, -+ * remote wakeup signaling is started. -+ */ -+ -+ /* Check if valid session */ -+ gotgctl.d32 = -+ DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); -+ if (gotgctl.b.bsesvld) { -+ /* Check if suspend state */ -+ dsts.d32 = -+ DWC_READ_REG32(& -+ (GET_CORE_IF(pcd)->dev_if-> -+ dev_global_regs->dsts)); -+ if (dsts.b.suspsts) { -+ dwc_otg_pcd_remote_wakeup(pcd, 1); -+ } -+ } else { -+ dwc_otg_pcd_initiate_srp(pcd); -+ } -+ -+ return 0; -+ -+} -+ -+/** -+ * Start the SRP timer to detect when the SRP does not complete within -+ * 6 seconds. -+ * -+ * @param pcd the pcd structure. -+ */ -+void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd) -+{ -+ dwc_irqflags_t flags; -+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags); -+ dwc_otg_initiate_srp(GET_CORE_IF(pcd)); -+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags); -+} -+ -+int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd) -+{ -+ return dwc_otg_get_frame_number(GET_CORE_IF(pcd)); -+} -+ -+int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd) -+{ -+ return GET_CORE_IF(pcd)->core_params->lpm_enable; -+} -+ -+uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->b_hnp_enable; -+} -+ -+uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->a_hnp_support; -+} -+ -+uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->a_alt_hnp_support; -+} -+ -+int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd) -+{ -+ return pcd->remote_wakeup_enable; -+} -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h -@@ -0,0 +1,273 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ -+ * $Revision: #48 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+#if !defined(__DWC_PCD_H__) -+#define __DWC_PCD_H__ -+ -+#include "dwc_otg_os_dep.h" -+#include "usb.h" -+#include "dwc_otg_cil.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_driver.h" -+ -+struct cfiobject; -+ -+/** -+ * @file -+ * -+ * This file contains the structures, constants, and interfaces for -+ * the Perpherial Contoller Driver (PCD). -+ * -+ * The Peripheral Controller Driver (PCD) for Linux will implement the -+ * Gadget API, so that the existing Gadget drivers can be used. For -+ * the Mass Storage Function driver the File-backed USB Storage Gadget -+ * (FBS) driver will be used. The FBS driver supports the -+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only -+ * transports. -+ * -+ */ -+ -+/** Invalid DMA Address */ -+#define DWC_DMA_ADDR_INVALID (~(dwc_dma_t)0) -+ -+/** Max Transfer size for any EP */ -+#define DDMA_MAX_TRANSFER_SIZE 65535 -+ -+/** -+ * Get the pointer to the core_if from the pcd pointer. -+ */ -+#define GET_CORE_IF( _pcd ) (_pcd->core_if) -+ -+/** -+ * States of EP0. -+ */ -+typedef enum ep0_state { -+ EP0_DISCONNECT, /* no host */ -+ EP0_IDLE, -+ EP0_IN_DATA_PHASE, -+ EP0_OUT_DATA_PHASE, -+ EP0_IN_STATUS_PHASE, -+ EP0_OUT_STATUS_PHASE, -+ EP0_STALL, -+} ep0state_e; -+ -+/** Fordward declaration.*/ -+struct dwc_otg_pcd; -+ -+/** DWC_otg iso request structure. -+ * -+ */ -+typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; -+ -+#ifdef DWC_UTE_PER_IO -+ -+/** -+ * This shall be the exact analogy of the same type structure defined in the -+ * usb_gadget.h. Each descriptor contains -+ */ -+struct dwc_iso_pkt_desc_port { -+ uint32_t offset; -+ uint32_t length; /* expected length */ -+ uint32_t actual_length; -+ uint32_t status; -+}; -+ -+struct dwc_iso_xreq_port { -+ /** transfer/submission flag */ -+ uint32_t tr_sub_flags; -+ /** Start the request ASAP */ -+#define DWC_EREQ_TF_ASAP 0x00000002 -+ /** Just enqueue the request w/o initiating a transfer */ -+#define DWC_EREQ_TF_ENQUEUE 0x00000004 -+ -+ /** -+ * count of ISO packets attached to this request - shall -+ * not exceed the pio_alloc_pkt_count -+ */ -+ uint32_t pio_pkt_count; -+ /** count of ISO packets allocated for this request */ -+ uint32_t pio_alloc_pkt_count; -+ /** number of ISO packet errors */ -+ uint32_t error_count; -+ /** reserved for future extension */ -+ uint32_t res; -+ /** Will be allocated and freed in the UTE gadget and based on the CFC value */ -+ struct dwc_iso_pkt_desc_port *per_io_frame_descs; -+}; -+#endif -+/** DWC_otg request structure. -+ * This structure is a list of requests. -+ */ -+typedef struct dwc_otg_pcd_request { -+ void *priv; -+ void *buf; -+ dwc_dma_t dma; -+ uint32_t length; -+ uint32_t actual; -+ unsigned sent_zlp:1; -+ /** -+ * Used instead of original buffer if -+ * it(physical address) is not dword-aligned. -+ **/ -+ uint8_t *dw_align_buf; -+ dwc_dma_t dw_align_buf_dma; -+ -+ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry; -+#ifdef DWC_UTE_PER_IO -+ struct dwc_iso_xreq_port ext_req; -+ //void *priv_ereq_nport; /* */ -+#endif -+} dwc_otg_pcd_request_t; -+ -+DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request); -+ -+/** PCD EP structure. -+ * This structure describes an EP, there is an array of EPs in the PCD -+ * structure. -+ */ -+typedef struct dwc_otg_pcd_ep { -+ /** USB EP Descriptor */ -+ const usb_endpoint_descriptor_t *desc; -+ -+ /** queue of dwc_otg_pcd_requests. */ -+ struct req_list queue; -+ unsigned stopped:1; -+ unsigned disabling:1; -+ unsigned dma:1; -+ unsigned queue_sof:1; -+ -+#ifdef DWC_EN_ISOC -+ /** ISOC req handle passed */ -+ void *iso_req_handle; -+#endif //_EN_ISOC_ -+ -+ /** DWC_otg ep data. */ -+ dwc_ep_t dwc_ep; -+ -+ /** Pointer to PCD */ -+ struct dwc_otg_pcd *pcd; -+ -+ void *priv; -+} dwc_otg_pcd_ep_t; -+ -+/** DWC_otg PCD Structure. -+ * This structure encapsulates the data for the dwc_otg PCD. -+ */ -+struct dwc_otg_pcd { -+ const struct dwc_otg_pcd_function_ops *fops; -+ /** The DWC otg device pointer */ -+ struct dwc_otg_device *otg_dev; -+ /** Core Interface */ -+ dwc_otg_core_if_t *core_if; -+ /** State of EP0 */ -+ ep0state_e ep0state; -+ /** EP0 Request is pending */ -+ unsigned ep0_pending:1; -+ /** Indicates when SET CONFIGURATION Request is in process */ -+ unsigned request_config:1; -+ /** The state of the Remote Wakeup Enable. */ -+ unsigned remote_wakeup_enable:1; -+ /** The state of the B-Device HNP Enable. */ -+ unsigned b_hnp_enable:1; -+ /** The state of A-Device HNP Support. */ -+ unsigned a_hnp_support:1; -+ /** The state of the A-Device Alt HNP support. */ -+ unsigned a_alt_hnp_support:1; -+ /** Count of pending Requests */ -+ unsigned request_pending; -+ -+ /** SETUP packet for EP0 -+ * This structure is allocated as a DMA buffer on PCD initialization -+ * with enough space for up to 3 setup packets. -+ */ -+ union { -+ usb_device_request_t req; -+ uint32_t d32[2]; -+ } *setup_pkt; -+ -+ dwc_dma_t setup_pkt_dma_handle; -+ -+ /* Additional buffer and flag for CTRL_WR premature case */ -+ uint8_t *backup_buf; -+ unsigned data_terminated; -+ -+ /** 2-byte dma buffer used to return status from GET_STATUS */ -+ uint16_t *status_buf; -+ dwc_dma_t status_buf_dma_handle; -+ -+ /** EP0 */ -+ dwc_otg_pcd_ep_t ep0; -+ -+ /** Array of IN EPs. */ -+ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1]; -+ /** Array of OUT EPs. */ -+ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1]; -+ /** number of valid EPs in the above array. */ -+// unsigned num_eps : 4; -+ dwc_spinlock_t *lock; -+ -+ /** Tasklet to defer starting of TEST mode transmissions until -+ * Status Phase has been completed. -+ */ -+ dwc_tasklet_t *test_mode_tasklet; -+ -+ /** Tasklet to delay starting of xfer in DMA mode */ -+ dwc_tasklet_t *start_xfer_tasklet; -+ -+ /** The test mode to enter when the tasklet is executed. */ -+ unsigned test_mode; -+ /** The cfi_api structure that implements most of the CFI API -+ * and OTG specific core configuration functionality -+ */ -+#ifdef DWC_UTE_CFI -+ struct cfiobject *cfi; -+#endif -+ -+}; -+ -+static inline struct device *dwc_otg_pcd_to_dev(struct dwc_otg_pcd *pcd) -+{ -+ return &pcd->otg_dev->os_dep.platformdev->dev; -+} -+ -+//FIXME this functions should be static, and this prototypes should be removed -+extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep); -+extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, -+ dwc_otg_pcd_request_t * req, int32_t status); -+ -+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep, -+ void *req_handle); -+ -+extern void do_test_mode(void *data); -+#endif -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h -@@ -0,0 +1,361 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $ -+ * $Revision: #11 $ -+ * $Date: 2011/10/26 $ -+ * $Change: 1873028 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+#if !defined(__DWC_PCD_IF_H__) -+#define __DWC_PCD_IF_H__ -+ -+//#include "dwc_os.h" -+#include "dwc_otg_core_if.h" -+#include "dwc_otg_driver.h" -+ -+/** @file -+ * This file defines DWC_OTG PCD Core API. -+ */ -+ -+struct dwc_otg_pcd; -+typedef struct dwc_otg_pcd dwc_otg_pcd_t; -+ -+/** Maxpacket size for EP0 */ -+#define MAX_EP0_SIZE 64 -+/** Maxpacket size for any EP */ -+#define MAX_PACKET_SIZE 1024 -+ -+/** @name Function Driver Callbacks */ -+/** @{ */ -+ -+/** This function will be called whenever a previously queued request has -+ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a -+ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset, -+ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid -+ * parameters. */ -+typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, -+ uint32_t actual); -+/** -+ * This function will be called whenever a previousle queued ISOC request has -+ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count -+ * function. -+ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_* -+ * functions. -+ */ -+typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int proc_buf_num); -+/** This function should handle any SETUP request that cannot be handled by the -+ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any -+ * class-specific requests, etc. The function must non-blocking. -+ * -+ * Returns 0 on success. -+ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported. -+ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes. -+ * Returns -DWC_E_SHUTDOWN on any other error. */ -+typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes); -+/** This is called whenever the device has been disconnected. The function -+ * driver should take appropriate action to clean up all pending requests in the -+ * PCD Core, remove all endpoints (except ep0), and initialize back to reset -+ * state. */ -+typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called when device has been connected. */ -+typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed); -+/** This function is called when device has been suspended */ -+typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called when device has received LPM tokens, i.e. -+ * device has been sent to sleep state. */ -+typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called when device has been resumed -+ * from suspend(L2) or L1 sleep state. */ -+typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called whenever hnp params has been changed. -+ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions -+ * to get hnp parameters. */ -+typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd); -+/** This function is called whenever USB RESET is detected. */ -+typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd); -+ -+typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes); -+ -+/** -+ * -+ * @param ep_handle Void pointer to the usb_ep structure -+ * @param ereq_port Pointer to the extended request structure created in the -+ * portable part. -+ */ -+typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, -+ void *ereq_port); -+/** Function Driver Ops Data Structure */ -+struct dwc_otg_pcd_function_ops { -+ dwc_connect_cb_t connect; -+ dwc_disconnect_cb_t disconnect; -+ dwc_setup_cb_t setup; -+ dwc_completion_cb_t complete; -+ dwc_isoc_completion_cb_t isoc_complete; -+ dwc_suspend_cb_t suspend; -+ dwc_sleep_cb_t sleep; -+ dwc_resume_cb_t resume; -+ dwc_reset_cb_t reset; -+ dwc_hnp_params_changed_cb_t hnp_changed; -+ cfi_setup_cb_t cfi_setup; -+#ifdef DWC_UTE_PER_IO -+ xiso_completion_cb_t xisoc_complete; -+#endif -+}; -+/** @} */ -+ -+/** @name Function Driver Functions */ -+/** @{ */ -+ -+/** Call this function to get pointer on dwc_otg_pcd_t, -+ * this pointer will be used for all PCD API functions. -+ * -+ * @param core_if The DWC_OTG Core -+ */ -+extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev); -+ -+/** Frees PCD allocated by dwc_otg_pcd_init -+ * -+ * @param pcd The PCD -+ */ -+extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd); -+ -+/** Call this to bind the function driver to the PCD Core. -+ * -+ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function. -+ * @param fops The Function Driver Ops data structure containing pointers to all callbacks. -+ */ -+extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd, -+ const struct dwc_otg_pcd_function_ops *fops); -+ -+/** Enables an endpoint for use. This function enables an endpoint in -+ * the PCD. The endpoint is described by the ep_desc which has the -+ * same format as a USB ep descriptor. The ep_handle parameter is used to refer -+ * to the endpoint from other API functions and in callbacks. Normally this -+ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the -+ * core for that interface. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns 0 on success. -+ * -+ * @param pcd The PCD -+ * @param ep_desc Endpoint descriptor -+ * @param usb_ep Handle on endpoint, that will be used to identify endpoint. -+ */ -+extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd, -+ const uint8_t * ep_desc, void *usb_ep); -+ -+/** Disable the endpoint referenced by ep_handle. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error occurred. -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle); -+ -+/** Queue a data transfer request on the endpoint referenced by ep_handle. -+ * After the transfer is completes, the complete callback will be called with -+ * the request status. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param buf The buffer for the data -+ * @param dma_buf The DMA buffer for the data -+ * @param buflen The length of the data transfer -+ * @param zero Specifies whether to send zero length last packet. -+ * @param req_handle Set this handle to any value to use to reference this -+ * request in the ep_dequeue function or from the complete callback -+ * @param atomic_alloc If driver need to perform atomic allocations -+ * for internal data structures. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, -+ uint32_t buflen, int zero, void *req_handle, -+ int atomic_alloc); -+#ifdef DWC_UTE_PER_IO -+/** -+ * -+ * @param ereq_nonport Pointer to the extended request part of the -+ * usb_request structure defined in usb_gadget.h file. -+ */ -+extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf, dwc_dma_t dma_buf, -+ uint32_t buflen, int zero, -+ void *req_handle, int atomic_alloc, -+ void *ereq_nonport); -+ -+#endif -+ -+/** De-queue the specified data transfer that has not yet completed. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle); -+ -+/** Halt (STALL) an endpoint or clear it. -+ * -+ * Returns -DWC_E_INVALID if invalid parameters were passed. -+ * Returns -DWC_E_SHUTDOWN if any other error ocurred. -+ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later -+ * Returns 0 on success. */ -+extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value); -+ -+/** This function */ -+extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle); -+ -+/** This function should be called on every hardware interrupt */ -+extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd); -+ -+/** This function returns current frame number */ -+extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd); -+ -+/** -+ * Start isochronous transfers on the endpoint referenced by ep_handle. -+ * For isochronous transfers duble buffering is used. -+ * After processing each of buffers comlete callback will be called with -+ * status for each transaction. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param buf0 The virtual address of first data buffer -+ * @param buf1 The virtual address of second data buffer -+ * @param dma0 The DMA address of first data buffer -+ * @param dma1 The DMA address of second data buffer -+ * @param sync_frame Data pattern frame number -+ * @param dp_frame Data size for pattern frame -+ * @param data_per_frame Data size for regular frame -+ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP. -+ * @param buf_proc_intrvl Interval of ISOC Buffer processing -+ * @param req_handle Handle of ISOC request -+ * @param atomic_alloc Specefies whether to perform atomic allocation for -+ * internal data structures. -+ * -+ * Returns -DWC_E_NO_MEMORY if there is no enough memory. -+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function. -+ * Returns -DW_E_SHUTDOWN for any other error. -+ * Returns 0 on success -+ */ -+extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle, -+ uint8_t * buf0, uint8_t * buf1, -+ dwc_dma_t dma0, dwc_dma_t dma1, -+ int sync_frame, int dp_frame, -+ int data_per_frame, int start_frame, -+ int buf_proc_intrvl, void *req_handle, -+ int atomic_alloc); -+ -+/** Stop ISOC transfers on endpoint referenced by ep_handle. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param req_handle Handle of ISOC request -+ * -+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function -+ * Returns 0 on success -+ */ -+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle); -+ -+/** Get ISOC packet status. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param iso_req_handle Isochronoush request handle -+ * @param packet Number of packet -+ * @param status Out parameter for returning status -+ * @param actual Out parameter for returning actual length -+ * @param offset Out parameter for returning offset -+ * -+ */ -+extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, -+ void *ep_handle, -+ void *iso_req_handle, int packet, -+ int *status, int *actual, -+ int *offset); -+ -+/** Get ISOC packet count. -+ * -+ * @param pcd The PCD -+ * @param ep_handle The handle of the endpoint -+ * @param iso_req_handle -+ */ -+extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, -+ void *ep_handle, -+ void *iso_req_handle); -+ -+/** This function starts the SRP Protocol if no session is in progress. If -+ * a session is already in progress, but the device is suspended, -+ * remote wakeup signaling is started. -+ */ -+extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd); -+ -+/** This function returns 1 if LPM support is enabled, and 0 otherwise. */ -+extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd); -+ -+/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */ -+extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd); -+ -+/** Initiate SRP */ -+extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd); -+ -+/** Starts remote wakeup signaling. */ -+extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set); -+ -+/** Starts micorsecond soft disconnect. */ -+extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs); -+/** This function returns whether device is dualspeed.*/ -+extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd); -+ -+/** This function returns whether device is otg. */ -+extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd); -+ -+/** These functions allow to get hnp parameters */ -+extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd); -+extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd); -+extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd); -+ -+/** CFI specific Interface functions */ -+/** Allocate a cfi buffer */ -+extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, -+ dwc_dma_t * addr, size_t buflen, -+ int flags); -+ -+/******************************************************************************/ -+ -+/** @} */ -+ -+#endif /* __DWC_PCD_IF_H__ */ -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c -@@ -0,0 +1,5148 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ -+ * $Revision: #116 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+#include "dwc_otg_pcd.h" -+ -+#ifdef DWC_UTE_CFI -+#include "dwc_otg_cfi.h" -+#endif -+ -+#ifdef DWC_UTE_PER_IO -+extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep); -+#endif -+//#define PRINT_CFI_DMA_DESCS -+ -+#define DEBUG_EP0 -+ -+/** -+ * This function updates OTG. -+ */ -+static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset) -+{ -+ -+ if (reset) { -+ pcd->b_hnp_enable = 0; -+ pcd->a_hnp_support = 0; -+ pcd->a_alt_hnp_support = 0; -+ } -+ -+ if (pcd->fops->hnp_changed) { -+ pcd->fops->hnp_changed(pcd); -+ } -+} -+ -+/** @file -+ * This file contains the implementation of the PCD Interrupt handlers. -+ * -+ * The PCD handles the device interrupts. Many conditions can cause a -+ * device interrupt. When an interrupt occurs, the device interrupt -+ * service routine determines the cause of the interrupt and -+ * dispatches handling to the appropriate function. These interrupt -+ * handling functions are described below. -+ * All interrupt registers are processed from LSB to MSB. -+ */ -+ -+/** -+ * This function prints the ep0 state for debug purposes. -+ */ -+static inline void print_ep0_state(dwc_otg_pcd_t * pcd) -+{ -+#ifdef DEBUG -+ char str[40]; -+ -+ switch (pcd->ep0state) { -+ case EP0_DISCONNECT: -+ dwc_strcpy(str, "EP0_DISCONNECT"); -+ break; -+ case EP0_IDLE: -+ dwc_strcpy(str, "EP0_IDLE"); -+ break; -+ case EP0_IN_DATA_PHASE: -+ dwc_strcpy(str, "EP0_IN_DATA_PHASE"); -+ break; -+ case EP0_OUT_DATA_PHASE: -+ dwc_strcpy(str, "EP0_OUT_DATA_PHASE"); -+ break; -+ case EP0_IN_STATUS_PHASE: -+ dwc_strcpy(str, "EP0_IN_STATUS_PHASE"); -+ break; -+ case EP0_OUT_STATUS_PHASE: -+ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE"); -+ break; -+ case EP0_STALL: -+ dwc_strcpy(str, "EP0_STALL"); -+ break; -+ default: -+ dwc_strcpy(str, "EP0_INVALID"); -+ } -+ -+ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); -+#endif -+} -+ -+/** -+ * This function calculate the size of the payload in the memory -+ * for out endpoints and prints size for debug purposes(used in -+ * 2.93a DevOutNak feature). -+ */ -+static inline void print_memory_payload(dwc_otg_pcd_t * pcd, dwc_ep_t * ep) -+{ -+#ifdef DEBUG -+ deptsiz_data_t deptsiz_init = {.d32 = 0 }; -+ deptsiz_data_t deptsiz_updt = {.d32 = 0 }; -+ int pack_num; -+ unsigned payload; -+ -+ deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num]; -+ deptsiz_updt.d32 = -+ DWC_READ_REG32(&pcd->core_if->dev_if-> -+ out_ep_regs[ep->num]->doeptsiz); -+ /* Payload will be */ -+ payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize; -+ /* Packet count is decremented every time a packet -+ * is written to the RxFIFO not in to the external memory -+ * So, if payload == 0, then it means no packet was sent to ext memory*/ -+ pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt); -+ DWC_DEBUGPL(DBG_PCDV, -+ "Payload for EP%d-%s\n", -+ ep->num, (ep->is_in ? "IN" : "OUT")); -+ DWC_DEBUGPL(DBG_PCDV, -+ "Number of transfered bytes = 0x%08x\n", payload); -+ DWC_DEBUGPL(DBG_PCDV, -+ "Number of transfered packets = %d\n", pack_num); -+#endif -+} -+ -+ -+#ifdef DWC_UTE_CFI -+static inline void print_desc(struct dwc_otg_dma_desc *ddesc, -+ const uint8_t * epname, int descnum) -+{ -+ CFI_INFO -+ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n", -+ epname, descnum, ddesc->buf, ddesc->status.b.bytes, -+ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts, -+ ddesc->status.b.bs); -+} -+#endif -+ -+/** -+ * This function returns pointer to in ep struct with number ep_num -+ */ -+static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) -+{ -+ int i; -+ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; -+ if (ep_num == 0) { -+ return &pcd->ep0; -+ } else { -+ for (i = 0; i < num_in_eps; ++i) { -+ if (pcd->in_ep[i].dwc_ep.num == ep_num) -+ return &pcd->in_ep[i]; -+ } -+ return 0; -+ } -+} -+ -+/** -+ * This function returns pointer to out ep struct with number ep_num -+ */ -+static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num) -+{ -+ int i; -+ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; -+ if (ep_num == 0) { -+ return &pcd->ep0; -+ } else { -+ for (i = 0; i < num_out_eps; ++i) { -+ if (pcd->out_ep[i].dwc_ep.num == ep_num) -+ return &pcd->out_ep[i]; -+ } -+ return 0; -+ } -+} -+ -+/** -+ * This functions gets a pointer to an EP from the wIndex address -+ * value of the control request. -+ */ -+dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex) -+{ -+ dwc_otg_pcd_ep_t *ep; -+ uint32_t ep_num = UE_GET_ADDR(wIndex); -+ -+ if (ep_num == 0) { -+ ep = &pcd->ep0; -+ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */ -+ ep = &pcd->in_ep[ep_num - 1]; -+ } else { -+ ep = &pcd->out_ep[ep_num - 1]; -+ } -+ -+ return ep; -+} -+ -+/** -+ * This function checks the EP request queue, if the queue is not -+ * empty the next request is started. -+ */ -+void start_next_request(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_pcd_request_t *req = 0; -+ uint32_t max_transfer = -+ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; -+ -+#ifdef DWC_UTE_CFI -+ struct dwc_otg_pcd *pcd; -+ pcd = ep->pcd; -+#endif -+ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ -+#ifdef DWC_UTE_CFI -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ ep->dwc_ep.cfi_req_len = req->length; -+ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req); -+ } else { -+#endif -+ /* Setup and start the Transfer */ -+ if (req->dw_align_buf) { -+ ep->dwc_ep.dma_addr = req->dw_align_buf_dma; -+ ep->dwc_ep.start_xfer_buff = req->dw_align_buf; -+ ep->dwc_ep.xfer_buff = req->dw_align_buf; -+ } else { -+ ep->dwc_ep.dma_addr = req->dma; -+ ep->dwc_ep.start_xfer_buff = req->buf; -+ ep->dwc_ep.xfer_buff = req->buf; -+ } -+ ep->dwc_ep.sent_zlp = 0; -+ ep->dwc_ep.total_len = req->length; -+ ep->dwc_ep.xfer_len = 0; -+ ep->dwc_ep.xfer_count = 0; -+ -+ ep->dwc_ep.maxxfer = max_transfer; -+ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) { -+ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE -+ - (DDMA_MAX_TRANSFER_SIZE % 4); -+ if (ep->dwc_ep.is_in) { -+ if (ep->dwc_ep.maxxfer > -+ DDMA_MAX_TRANSFER_SIZE) { -+ ep->dwc_ep.maxxfer = -+ DDMA_MAX_TRANSFER_SIZE; -+ } -+ } else { -+ if (ep->dwc_ep.maxxfer > out_max_xfer) { -+ ep->dwc_ep.maxxfer = -+ out_max_xfer; -+ } -+ } -+ } -+ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) { -+ ep->dwc_ep.maxxfer -= -+ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket); -+ } -+ if (req->sent_zlp) { -+ if ((ep->dwc_ep.total_len % -+ ep->dwc_ep.maxpacket == 0) -+ && (ep->dwc_ep.total_len != 0)) { -+ ep->dwc_ep.sent_zlp = 1; -+ } -+ -+ } -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); -+ } else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ DWC_PRINTF("There are no more ISOC requests \n"); -+ ep->dwc_ep.frame_num = 0xFFFFFFFF; -+ } -+} -+ -+/** -+ * This function handles the SOF Interrupts. At this time the SOF -+ * Interrupt is disabled. -+ */ -+int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+ gintsts_data_t gintsts; -+ -+ DWC_DEBUGPL(DBG_PCD, "SOF\n"); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.sofintr = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This function handles the Rx Status Queue Level Interrupt, which -+ * indicates that there is a least one packet in the Rx FIFO. The -+ * packets are moved from the FIFO to memory, where they will be -+ * processed when the Endpoint Interrupt Register indicates Transfer -+ * Complete or SETUP Phase Done. -+ * -+ * Repeat the following until the Rx Status Queue is empty: -+ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet -+ * info -+ * -# If Receive FIFO is empty then skip to step Clear the interrupt -+ * and exit -+ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the -+ * SETUP data to the buffer -+ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data -+ * to the destination buffer -+ */ -+int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ gintmsk_data_t gintmask = {.d32 = 0 }; -+ device_grxsts_data_t status; -+ dwc_otg_pcd_ep_t *ep; -+ gintsts_data_t gintsts; -+#ifdef DEBUG -+ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" }; -+#endif -+ -+ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); -+ /* Disable the Rx Status Queue Level interrupt */ -+ gintmask.b.rxstsqlvl = 1; -+ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0); -+ -+ /* Get the Status from the top of the FIFO */ -+ status.d32 = DWC_READ_REG32(&global_regs->grxstsp); -+ -+ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " -+ "pktsts:%x Frame:%d(0x%0x)\n", -+ status.b.epnum, status.b.bcnt, -+ dpid_str[status.b.dpid], -+ status.b.pktsts, status.b.fn, status.b.fn); -+ /* Get pointer to EP structure */ -+ ep = get_out_ep(pcd, status.b.epnum); -+ -+ switch (status.b.pktsts) { -+ case DWC_DSTS_GOUT_NAK: -+ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); -+ break; -+ case DWC_STS_DATA_UPDT: -+ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); -+ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { -+ /** @todo NGS Check for buffer overflow? */ -+ dwc_otg_read_packet(core_if, -+ ep->dwc_ep.xfer_buff, -+ status.b.bcnt); -+ ep->dwc_ep.xfer_count += status.b.bcnt; -+ ep->dwc_ep.xfer_buff += status.b.bcnt; -+ } -+ break; -+ case DWC_STS_XFER_COMP: -+ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); -+ break; -+ case DWC_DSTS_SETUP_COMP: -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); -+#endif -+ break; -+ case DWC_DSTS_SETUP_UPDT: -+ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, -+ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", -+ pcd->setup_pkt->req.bmRequestType, -+ pcd->setup_pkt->req.bRequest, -+ UGETW(pcd->setup_pkt->req.wValue), -+ UGETW(pcd->setup_pkt->req.wIndex), -+ UGETW(pcd->setup_pkt->req.wLength)); -+#endif -+ ep->dwc_ep.xfer_count += status.b.bcnt; -+ break; -+ default: -+ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", -+ status.b.pktsts); -+ break; -+ } -+ -+ /* Enable the Rx Status Queue Level interrupt */ -+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32); -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.rxstsqlvl = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); -+ return 1; -+} -+ -+/** -+ * This function examines the Device IN Token Learning Queue to -+ * determine the EP number of the last IN token received. This -+ * implementation is for the Mass Storage device where there are only -+ * 2 IN EPs (Control-IN and BULK-IN). -+ * -+ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there -+ * are 8 EP Numbers in each of the other possible DTKNQ Registers. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * -+ */ -+static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_device_global_regs_t *dev_global_regs = -+ core_if->dev_if->dev_global_regs; -+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; -+ /* Number of Token Queue Registers */ -+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; -+ dtknq1_data_t dtknqr1; -+ uint32_t in_tkn_epnums[4]; -+ int ndx = 0; -+ int i = 0; -+ volatile uint32_t *addr = &dev_global_regs->dtknqr1; -+ int epnum = 0; -+ -+ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); -+ -+ /* Read the DTKNQ Registers */ -+ for (i = 0; i < DTKNQ_REG_CNT; i++) { -+ in_tkn_epnums[i] = DWC_READ_REG32(addr); -+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, -+ in_tkn_epnums[i]); -+ if (addr == &dev_global_regs->dvbusdis) { -+ addr = &dev_global_regs->dtknqr3_dthrctl; -+ } else { -+ ++addr; -+ } -+ -+ } -+ -+ /* Copy the DTKNQR1 data to the bit field. */ -+ dtknqr1.d32 = in_tkn_epnums[0]; -+ /* Get the EP numbers */ -+ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; -+ ndx = dtknqr1.b.intknwptr - 1; -+ -+ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); -+ if (ndx == -1) { -+ /** @todo Find a simpler way to calculate the max -+ * queue position.*/ -+ int cnt = TOKEN_Q_DEPTH; -+ if (TOKEN_Q_DEPTH <= 6) { -+ cnt = TOKEN_Q_DEPTH - 1; -+ } else if (TOKEN_Q_DEPTH <= 14) { -+ cnt = TOKEN_Q_DEPTH - 7; -+ } else if (TOKEN_Q_DEPTH <= 22) { -+ cnt = TOKEN_Q_DEPTH - 15; -+ } else { -+ cnt = TOKEN_Q_DEPTH - 23; -+ } -+ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF; -+ } else { -+ if (ndx <= 5) { -+ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; -+ } else if (ndx <= 13) { -+ ndx -= 6; -+ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; -+ } else if (ndx <= 21) { -+ ndx -= 14; -+ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; -+ } else if (ndx <= 29) { -+ ndx -= 22; -+ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; -+ } -+ } -+ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); -+ return epnum; -+} -+ -+/** -+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. -+ * The active request is checked for the next packet to be loaded into -+ * the non-periodic Tx FIFO. -+ */ -+int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ gnptxsts_data_t txstatus = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ -+ int epnum = 0; -+ dwc_otg_pcd_ep_t *ep = 0; -+ uint32_t len = 0; -+ int dwords; -+ -+ /* Get the epnum from the IN Token Learning Queue. */ -+ epnum = get_ep_of_last_in_token(core_if); -+ ep = get_in_ep(pcd, epnum); -+ -+ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum); -+ -+ ep_regs = core_if->dev_if->in_ep_regs[epnum]; -+ -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32); -+ -+ while (txstatus.b.nptxqspcavail > 0 && -+ txstatus.b.nptxfspcavail > dwords && -+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts); -+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", -+ DWC_READ_REG32(&global_regs->gnptxsts)); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.nptxfempty = 1; -+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This function is called when dedicated Tx FIFO Empty interrupt occurs. -+ * The active request is checked for the next packet to be loaded into -+ * apropriate Tx FIFO. -+ */ -+static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *ep_regs; -+ dtxfsts_data_t txstatus = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep = 0; -+ uint32_t len = 0; -+ int dwords; -+ -+ ep = get_in_ep(pcd, epnum); -+ -+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum); -+ -+ ep_regs = core_if->dev_if->in_ep_regs[epnum]; -+ -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ -+ /* While there is space in the queue and space in the FIFO and -+ * More data to tranfer, Write packets to the Tx FIFO */ -+ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); -+ -+ while (txstatus.b.txfspcavail > dwords && -+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && -+ ep->dwc_ep.xfer_len != 0) { -+ /* Write the FIFO */ -+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); -+ -+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; -+ if (len > ep->dwc_ep.maxpacket) { -+ len = ep->dwc_ep.maxpacket; -+ } -+ -+ dwords = (len + 3) / 4; -+ txstatus.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts); -+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum, -+ txstatus.d32); -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts)); -+ -+ return 1; -+} -+ -+/** -+ * This function is called when the Device is disconnected. It stops -+ * any active requests and informs the Gadget driver of the -+ * disconnect. -+ */ -+void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd) -+{ -+ int i, num_in_eps, num_out_eps; -+ dwc_otg_pcd_ep_t *ep; -+ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_SPINLOCK(pcd->lock); -+ -+ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; -+ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); -+ /* don't disconnect drivers more than once */ -+ if (pcd->ep0state == EP0_DISCONNECT) { -+ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); -+ DWC_SPINUNLOCK(pcd->lock); -+ return; -+ } -+ pcd->ep0state = EP0_DISCONNECT; -+ -+ /* Reset the OTG state. */ -+ dwc_otg_pcd_update_otg(pcd, 1); -+ -+ /* Disable the NP Tx Fifo Empty Interrupt. */ -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Flush the FIFOs */ -+ /**@todo NGS Flush Periodic FIFOs */ -+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); -+ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); -+ -+ /* prevent new request submissions, kill any outstanding requests */ -+ ep = &pcd->ep0; -+ dwc_otg_request_nuke(ep); -+ /* prevent new request submissions, kill any outstanding requests */ -+ for (i = 0; i < num_in_eps; i++) { -+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; -+ dwc_otg_request_nuke(ep); -+ } -+ /* prevent new request submissions, kill any outstanding requests */ -+ for (i = 0; i < num_out_eps; i++) { -+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; -+ dwc_otg_request_nuke(ep); -+ } -+ -+ /* report disconnect; the driver is already quiesced */ -+ if (pcd->fops->disconnect) { -+ DWC_SPINUNLOCK(pcd->lock); -+ pcd->fops->disconnect(pcd); -+ DWC_SPINLOCK(pcd->lock); -+ } -+ DWC_SPINUNLOCK(pcd->lock); -+} -+ -+/** -+ * This interrupt indicates that ... -+ */ -+int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr"); -+ intr_mask.b.i2cintr = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.i2cintr = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that ... -+ */ -+int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+#if defined(VERBOSE) -+ DWC_PRINTF("Early Suspend Detected\n"); -+#endif -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.erlysuspend = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This function configures EPO to receive SETUP packets. -+ * -+ * @todo NGS: Update the comments from the HW FS. -+ * -+ * -# Program the following fields in the endpoint specific registers -+ * for Control OUT EP 0, in order to receive a setup packet -+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back -+ * setup packets) -+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back -+ * to back setup packets) -+ * - In DMA mode, DOEPDMA0 Register with a memory address to -+ * store any setup packets received -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param pcd Programming view of the PCD. -+ */ -+static inline void ep0_out_start(dwc_otg_core_if_t * core_if, -+ dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ depctl_data_t doepctl = {.d32 = 0 }; -+ -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__, -+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); -+#endif -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl); -+ if (doepctl.b.epena) { -+ return; -+ } -+ } -+ -+ doeptsize0.b.supcnt = 3; -+ doeptsize0.b.pktcnt = 1; -+ doeptsize0.b.xfersize = 8 * 3; -+ -+ if (core_if->dma_enable) { -+ if (!core_if->dma_desc_enable) { -+ /** put here as for Hermes mode deptisz register should not be written */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, -+ doeptsize0.d32); -+ -+ /** @todo dma needs to handle multiple setup packets (up to 3) */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, -+ pcd->setup_pkt_dma_handle); -+ } else { -+ dev_if->setup_desc_index = -+ (dev_if->setup_desc_index + 1) & 1; -+ dma_desc = -+ dev_if->setup_desc_addr[dev_if->setup_desc_index]; -+ -+ /** DMA Descriptor Setup */ -+ dma_desc->status.b.bs = BS_HOST_BUSY; -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ dma_desc->status.b.sr = 0; -+ dma_desc->status.b.mtrf = 0; -+ } -+ dma_desc->status.b.l = 1; -+ dma_desc->status.b.ioc = 1; -+ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; -+ dma_desc->buf = pcd->setup_pkt_dma_handle; -+ dma_desc->status.b.sts = 0; -+ dma_desc->status.b.bs = BS_HOST_READY; -+ -+ /** DOEPDMA0 Register write */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma, -+ dev_if->dma_setup_desc_addr -+ [dev_if->setup_desc_index]); -+ } -+ -+ } else { -+ /** put here as for Hermes mode deptisz register should not be written */ -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz, -+ doeptsize0.d32); -+ } -+ -+ /** DOEPCTL0 Register write cnak will be set after setup interrupt */ -+ doepctl.d32 = 0; -+ doepctl.b.epena = 1; -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) { -+ doepctl.b.cnak = 1; -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); -+ } else { -+ DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32); -+ } -+ -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl)); -+ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n", -+ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl)); -+#endif -+} -+ -+/** -+ * This interrupt occurs when a USB Reset is detected. When the USB -+ * Reset Interrupt occurs the device state is set to DEFAULT and the -+ * EP0 state is set to IDLE. -+ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) -+ * -# Unmask the following interrupt bits -+ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) -+ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) -+ * - DOEPMSK.SETUP = 1 -+ * - DOEPMSK.XferCompl = 1 -+ * - DIEPMSK.XferCompl = 1 -+ * - DIEPMSK.TimeOut = 1 -+ * -# Program the following fields in the endpoint specific registers -+ * for Control OUT EP 0, in order to receive a setup packet -+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back -+ * setup packets) -+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back -+ * to back setup packets) -+ * - In DMA mode, DOEPDMA0 Register with a memory address to -+ * store any setup packets received -+ * At this point, all the required initialization, except for enabling -+ * the control 0 OUT endpoint is done, for receiving SETUP packets. -+ */ -+int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ depctl_data_t doepctl = {.d32 = 0 }; -+ depctl_data_t diepctl = {.d32 = 0 }; -+ daint_data_t daintmsk = {.d32 = 0 }; -+ doepmsk_data_t doepmsk = {.d32 = 0 }; -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ grstctl_t resetctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ int i = 0; -+ gintsts_data_t gintsts; -+ pcgcctl_data_t power = {.d32 = 0 }; -+ -+ power.d32 = DWC_READ_REG32(core_if->pcgcctl); -+ if (power.b.stoppclk) { -+ power.d32 = 0; -+ power.b.stoppclk = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); -+ -+ power.b.pwrclmp = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); -+ -+ power.b.rstpdwnmodule = 1; -+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0); -+ } -+ -+ core_if->lx_state = DWC_OTG_L0; -+ -+ DWC_PRINTF("USB RESET\n"); -+#ifdef DWC_EN_ISOC -+ for (i = 1; i < 16; ++i) { -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ ep = get_in_ep(pcd, i); -+ if (ep != 0) { -+ dwc_ep = &ep->dwc_ep; -+ dwc_ep->next_frame = 0xffffffff; -+ } -+ } -+#endif /* DWC_EN_ISOC */ -+ -+ /* reset the HNP settings */ -+ dwc_otg_pcd_update_otg(pcd, 1); -+ -+ /* Clear the Remote Wakeup Signalling */ -+ dctl.b.rmtwkupsig = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0); -+ -+ /* Set NAK for all OUT EPs */ -+ doepctl.b.snak = 1; -+ for (i = 0; i <= dev_if->num_out_eps; i++) { -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); -+ } -+ -+ /* Flush the NP Tx FIFO */ -+ dwc_otg_flush_tx_fifo(core_if, 0x10); -+ /* Flush the Learning Queue */ -+ resetctl.b.intknqflsh = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); -+ -+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) { -+ core_if->start_predict = 0; -+ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) { -+ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active -+ } -+ core_if->nextep_seq[0] = 0; -+ core_if->first_in_nextep_seq = 0; -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl); -+ diepctl.b.nextep = 0; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); -+ -+ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */ -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.epmscnt = 2; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]); -+ } -+ } -+ -+ if (core_if->multiproc_int_enable) { -+ daintmsk.b.inep0 = 1; -+ daintmsk.b.outep0 = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, -+ daintmsk.d32); -+ -+ doepmsk.b.setup = 1; -+ doepmsk.b.xfercompl = 1; -+ doepmsk.b.ahberr = 1; -+ doepmsk.b.epdisabled = 1; -+ -+ if ((core_if->dma_desc_enable) || -+ (core_if->dma_enable -+ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { -+ doepmsk.b.stsphsercvd = 1; -+ } -+ if (core_if->dma_desc_enable) -+ doepmsk.b.bna = 1; -+/* -+ doepmsk.b.babble = 1; -+ doepmsk.b.nyet = 1; -+ -+ if (core_if->dma_enable) { -+ doepmsk.b.nak = 1; -+ } -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0], -+ doepmsk.d32); -+ -+ diepmsk.b.xfercompl = 1; -+ diepmsk.b.timeout = 1; -+ diepmsk.b.epdisabled = 1; -+ diepmsk.b.ahberr = 1; -+ diepmsk.b.intknepmis = 1; -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) -+ diepmsk.b.intknepmis = 0; -+ -+/* if (core_if->dma_desc_enable) { -+ diepmsk.b.bna = 1; -+ } -+*/ -+/* -+ if (core_if->dma_enable) { -+ diepmsk.b.nak = 1; -+ } -+*/ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0], -+ diepmsk.d32); -+ } else { -+ daintmsk.b.inep0 = 1; -+ daintmsk.b.outep0 = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, -+ daintmsk.d32); -+ -+ doepmsk.b.setup = 1; -+ doepmsk.b.xfercompl = 1; -+ doepmsk.b.ahberr = 1; -+ doepmsk.b.epdisabled = 1; -+ -+ if ((core_if->dma_desc_enable) || -+ (core_if->dma_enable -+ && core_if->snpsid >= OTG_CORE_REV_3_00a)) { -+ doepmsk.b.stsphsercvd = 1; -+ } -+ if (core_if->dma_desc_enable) -+ doepmsk.b.bna = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); -+ -+ diepmsk.b.xfercompl = 1; -+ diepmsk.b.timeout = 1; -+ diepmsk.b.epdisabled = 1; -+ diepmsk.b.ahberr = 1; -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) -+ diepmsk.b.intknepmis = 0; -+/* -+ if (core_if->dma_desc_enable) { -+ diepmsk.b.bna = 1; -+ } -+*/ -+ -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); -+ } -+ -+ /* Reset Device Address */ -+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg); -+ dcfg.b.devaddr = 0; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32); -+ -+ /* setup EP0 to receive SETUP packets */ -+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) -+ ep0_out_start(core_if, pcd); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.usbreset = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * Get the device speed from the device status register and convert it -+ * to USB speed constant. -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ */ -+static int get_device_speed(dwc_otg_core_if_t * core_if) -+{ -+ dsts_data_t dsts; -+ int speed = 0; -+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts); -+ -+ switch (dsts.b.enumspd) { -+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: -+ speed = USB_SPEED_HIGH; -+ break; -+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: -+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: -+ speed = USB_SPEED_FULL; -+ break; -+ -+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: -+ speed = USB_SPEED_LOW; -+ break; -+ } -+ -+ return speed; -+} -+ -+/** -+ * Read the device status register and set the device speed in the -+ * data structure. -+ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. -+ */ -+int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ gintsts_data_t gintsts; -+ gusbcfg_data_t gusbcfg; -+ dwc_otg_core_global_regs_t *global_regs = -+ GET_CORE_IF(pcd)->core_global_regs; -+ uint8_t utmi16b, utmi8b; -+ int speed; -+ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); -+ -+ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) { -+ utmi16b = 6; //vahrama old value was 6; -+ utmi8b = 9; -+ } else { -+ utmi16b = 4; -+ utmi8b = 8; -+ } -+ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) { -+ ep0_out_start(GET_CORE_IF(pcd), pcd); -+ } -+ -+#ifdef DEBUG_EP0 -+ print_ep0_state(pcd); -+#endif -+ -+ if (pcd->ep0state == EP0_DISCONNECT) { -+ pcd->ep0state = EP0_IDLE; -+ } else if (pcd->ep0state == EP0_STALL) { -+ pcd->ep0state = EP0_IDLE; -+ } -+ -+ pcd->ep0state = EP0_IDLE; -+ -+ ep0->stopped = 0; -+ -+ speed = get_device_speed(GET_CORE_IF(pcd)); -+ pcd->fops->connect(pcd, speed); -+ -+ /* Set USB turnaround time based on device speed and PHY interface. */ -+ gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg); -+ if (speed == USB_SPEED_HIGH) { -+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == -+ DWC_HWCFG2_HS_PHY_TYPE_ULPI) { -+ /* ULPI interface */ -+ gusbcfg.b.usbtrdtim = 9; -+ } -+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == -+ DWC_HWCFG2_HS_PHY_TYPE_UTMI) { -+ /* UTMI+ interface */ -+ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { -+ gusbcfg.b.usbtrdtim = utmi8b; -+ } else if (GET_CORE_IF(pcd)->hwcfg4. -+ b.utmi_phy_data_width == 1) { -+ gusbcfg.b.usbtrdtim = utmi16b; -+ } else if (GET_CORE_IF(pcd)-> -+ core_params->phy_utmi_width == 8) { -+ gusbcfg.b.usbtrdtim = utmi8b; -+ } else { -+ gusbcfg.b.usbtrdtim = utmi16b; -+ } -+ } -+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == -+ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { -+ /* UTMI+ OR ULPI interface */ -+ if (gusbcfg.b.ulpi_utmi_sel == 1) { -+ /* ULPI interface */ -+ gusbcfg.b.usbtrdtim = 9; -+ } else { -+ /* UTMI+ interface */ -+ if (GET_CORE_IF(pcd)-> -+ core_params->phy_utmi_width == 16) { -+ gusbcfg.b.usbtrdtim = utmi16b; -+ } else { -+ gusbcfg.b.usbtrdtim = utmi8b; -+ } -+ } -+ } -+ } else { -+ /* Full or low speed */ -+ gusbcfg.b.usbtrdtim = 9; -+ } -+ DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.enumdone = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that the ISO OUT Packet was dropped due to -+ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs -+ * read all the data from the Rx FIFO. -+ */ -+int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ -+ DWC_WARN("INTERRUPT Handler not implemented for %s\n", -+ "ISOC Out Dropped"); -+ -+ intr_mask.b.isooutdrop = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.isooutdrop = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates the end of the portion of the micro-frame -+ * for periodic transactions. If there is a periodic transaction for -+ * the next frame, load the packets into the EP periodic Tx FIFO. -+ */ -+int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP"); -+ -+ intr_mask.b.eopframe = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.eopframe = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that EP of the packet on the top of the -+ * non-periodic Tx FIFO does not match EP of the IN Token received. -+ * -+ * The "Device IN Token Queue" Registers are read to determine the -+ * order the IN Tokens have been received. The non-periodic Tx FIFO -+ * is flushed, so it can be reloaded in the order seen in the IN Token -+ * Queue. -+ */ -+int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dctl_data_t dctl; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) { -+ core_if->start_predict = 1; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); -+ -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ if (!gintsts.b.ginnakeff) { -+ /* Disable EP Mismatch interrupt */ -+ intr_mask.d32 = 0; -+ intr_mask.b.epmismatch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); -+ /* Enable the Global IN NAK Effective Interrupt */ -+ intr_mask.d32 = 0; -+ intr_mask.b.ginnakeff = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); -+ /* Set the global non-periodic IN NAK handshake */ -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ dctl.b.sgnpinnak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+ } else { -+ DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n"); -+ } -+ /* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective() -+ * handler after Global IN NAK Effective interrupt will be asserted */ -+ } -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.epmismatch = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This interrupt is valid only in DMA mode. This interrupt indicates that the -+ * core has stopped fetching data for IN endpoints due to the unavailability of -+ * TxFIFO space or Request Queue space. This interrupt is used by the -+ * application for an endpoint mismatch algorithm. -+ * -+ * @param pcd The PCD -+ */ -+int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+ gintmsk_data_t gintmsk_data; -+ dctl_data_t dctl; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); -+ -+ /* Clear the global non-periodic IN NAK handshake */ -+ dctl.d32 = 0; -+ dctl.b.cgnpinnak = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ -+ /* Mask GINTSTS.FETSUSP interrupt */ -+ gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ gintmsk_data.b.fetsusp = 0; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.fetsusp = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32); -+ -+ return 1; -+} -+/** -+ * This funcion stalls EP0. -+ */ -+static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ usb_device_request_t *ctrl = &pcd->setup_pkt->req; -+ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", -+ ctrl->bmRequestType, ctrl->bRequest, err_val); -+ -+ ep0->dwc_ep.is_in = 1; -+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ pcd->ep0.stopped = 1; -+ pcd->ep0state = EP0_IDLE; -+ ep0_out_start(GET_CORE_IF(pcd), pcd); -+} -+ -+/** -+ * This functions delegates the setup command to the gadget driver. -+ */ -+static inline void do_gadget_setup(dwc_otg_pcd_t * pcd, -+ usb_device_request_t * ctrl) -+{ -+ int ret = 0; -+ DWC_SPINUNLOCK(pcd->lock); -+ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl); -+ DWC_SPINLOCK(pcd->lock); -+ if (ret < 0) { -+ ep0_do_stall(pcd, ret); -+ } -+ -+ /** @todo This is a g_file_storage gadget driver specific -+ * workaround: a DELAYED_STATUS result from the fsg_setup -+ * routine will result in the gadget queueing a EP0 IN status -+ * phase for a two-stage control transfer. Exactly the same as -+ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class -+ * specific request. Need a generic way to know when the gadget -+ * driver will queue the status phase. Can we assume when we -+ * call the gadget driver setup() function that it will always -+ * queue and require the following flag? Need to look into -+ * this. -+ */ -+ -+ if (ret == 256 + 999) { -+ pcd->request_config = 1; -+ } -+} -+ -+#ifdef DWC_UTE_CFI -+/** -+ * This functions delegates the CFI setup commands to the gadget driver. -+ * This function will return a negative value to indicate a failure. -+ */ -+static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd, -+ struct cfi_usb_ctrlrequest *ctrl_req) -+{ -+ int ret = 0; -+ -+ if (pcd->fops && pcd->fops->cfi_setup) { -+ DWC_SPINUNLOCK(pcd->lock); -+ ret = pcd->fops->cfi_setup(pcd, ctrl_req); -+ DWC_SPINLOCK(pcd->lock); -+ if (ret < 0) { -+ ep0_do_stall(pcd, ret); -+ return ret; -+ } -+ } -+ -+ return ret; -+} -+#endif -+ -+/** -+ * This function starts the Zero-Length Packet for the IN status phase -+ * of a 2 stage control transfer. -+ */ -+static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ if (pcd->ep0state == EP0_STALL) { -+ return; -+ } -+ -+ pcd->ep0state = EP0_IN_STATUS_PHASE; -+ -+ /* Prepare for more SETUP Packets */ -+ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); -+ if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) -+ && (pcd->core_if->dma_desc_enable) -+ && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) { -+ DWC_DEBUGPL(DBG_PCDV, -+ "Data terminated wait next packet in out_desc_addr\n"); -+ pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr); -+ pcd->data_terminated = 1; -+ } -+ ep0->dwc_ep.xfer_len = 0; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.is_in = 1; -+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ -+ /* Prepare for more SETUP Packets */ -+ //ep0_out_start(GET_CORE_IF(pcd), pcd); -+} -+ -+/** -+ * This function starts the Zero-Length Packet for the OUT status phase -+ * of a 2 stage control transfer. -+ */ -+static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ if (pcd->ep0state == EP0_STALL) { -+ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); -+ return; -+ } -+ pcd->ep0state = EP0_OUT_STATUS_PHASE; -+ -+ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); -+ ep0->dwc_ep.xfer_len = 0; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.is_in = 0; -+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); -+ -+ /* Prepare for more SETUP Packets */ -+ if (GET_CORE_IF(pcd)->dma_enable == 0) { -+ ep0_out_start(GET_CORE_IF(pcd), pcd); -+ } -+} -+ -+/** -+ * Clear the EP halt (STALL) and if pending requests start the -+ * transfer. -+ */ -+static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) -+{ -+ if (ep->dwc_ep.stall_clear_flag == 0) -+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); -+ -+ /* Reactive the EP */ -+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); -+ if (ep->stopped) { -+ ep->stopped = 0; -+ /* If there is a request in the EP queue start it */ -+ -+ /** @todo FIXME: this causes an EP mismatch in DMA mode. -+ * epmismatch not yet implemented. */ -+ -+ /* -+ * Above fixme is solved by implmenting a tasklet to call the -+ * start_next_request(), outside of interrupt context at some -+ * time after the current time, after a clear-halt setup packet. -+ * Still need to implement ep mismatch in the future if a gadget -+ * ever uses more than one endpoint at once -+ */ -+ ep->queue_sof = 1; -+ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet); -+ } -+ /* Start Control Status Phase */ -+ do_setup_in_status_phase(pcd); -+} -+ -+/** -+ * This function is called when the SET_FEATURE TEST_MODE Setup packet -+ * is sent from the host. The Device Control register is written with -+ * the Test Mode bits set to the specified Test Mode. This is done as -+ * a tasklet so that the "Status" phase of the control transfer -+ * completes before transmitting the TEST packets. -+ * -+ * @todo This has not been tested since the tasklet struct was put -+ * into the PCD struct! -+ * -+ */ -+void do_test_mode(void *data) -+{ -+ dctl_data_t dctl; -+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ int test_mode = pcd->test_mode; -+ -+// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); -+ -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ switch (test_mode) { -+ case 1: // TEST_J -+ dctl.b.tstctl = 1; -+ break; -+ -+ case 2: // TEST_K -+ dctl.b.tstctl = 2; -+ break; -+ -+ case 3: // TEST_SE0_NAK -+ dctl.b.tstctl = 3; -+ break; -+ -+ case 4: // TEST_PACKET -+ dctl.b.tstctl = 4; -+ break; -+ -+ case 5: // TEST_FORCE_ENABLE -+ dctl.b.tstctl = 5; -+ break; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+} -+ -+/** -+ * This function process the GET_STATUS Setup Commands. -+ */ -+static inline void do_get_status(dwc_otg_pcd_t * pcd) -+{ -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ uint16_t *status = pcd->status_buf; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, -+ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+#endif -+ -+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { -+ case UT_DEVICE: -+ if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */ -+ DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex)); -+ DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver); -+ DWC_PRINTF("OTG CAP - %d, %d\n", -+ core_if->core_params->otg_cap, -+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); -+ if (core_if->otg_ver == 1 -+ && core_if->core_params->otg_cap == -+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ uint8_t *otgsts = (uint8_t*)pcd->status_buf; -+ *otgsts = (core_if->otg_sts & 0x1); -+ pcd->ep0_pending = 1; -+ ep0->dwc_ep.start_xfer_buff = -+ (uint8_t *) otgsts; -+ ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts; -+ ep0->dwc_ep.dma_addr = -+ pcd->status_buf_dma_handle; -+ ep0->dwc_ep.xfer_len = 1; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ return; -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ } else { -+ *status = 0x1; /* Self powered */ -+ *status |= pcd->remote_wakeup_enable << 1; -+ break; -+ } -+ case UT_INTERFACE: -+ *status = 0; -+ break; -+ -+ case UT_ENDPOINT: -+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); -+ if (ep == 0 || UGETW(ctrl.wLength) > 2) { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ /** @todo check for EP stall */ -+ *status = ep->stopped; -+ break; -+ } -+ pcd->ep0_pending = 1; -+ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status; -+ ep0->dwc_ep.xfer_buff = (uint8_t *) status; -+ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; -+ ep0->dwc_ep.xfer_len = 2; -+ ep0->dwc_ep.xfer_count = 0; -+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; -+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); -+} -+ -+/** -+ * This function process the SET_FEATURE Setup Commands. -+ */ -+static inline void do_set_feature(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep = 0; -+ int32_t otg_cap_param = core_if->core_params->otg_cap; -+ gotgctl_data_t gotgctl = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param); -+ -+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { -+ case UT_DEVICE: -+ switch (UGETW(ctrl.wValue)) { -+ case UF_DEVICE_REMOTE_WAKEUP: -+ pcd->remote_wakeup_enable = 1; -+ break; -+ -+ case UF_TEST_MODE: -+ /* Setup the Test Mode tasklet to do the Test -+ * Packet generation after the SETUP Status -+ * phase has completed. */ -+ -+ /** @todo This has not been tested since the -+ * tasklet struct was put into the PCD -+ * struct! */ -+ pcd->test_mode = UGETW(ctrl.wIndex) >> 8; -+ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet); -+ break; -+ -+ case UF_DEVICE_B_HNP_ENABLE: -+ DWC_DEBUGPL(DBG_PCDV, -+ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); -+ -+ /* dev may initiate HNP */ -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ pcd->b_hnp_enable = 1; -+ dwc_otg_pcd_update_otg(pcd, 0); -+ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); -+ /**@todo Is the gotgctl.devhnpen cleared -+ * by a USB Reset? */ -+ gotgctl.b.devhnpen = 1; -+ gotgctl.b.hnpreq = 1; -+ DWC_WRITE_REG32(&global_regs->gotgctl, -+ gotgctl.d32); -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ -+ case UF_DEVICE_A_HNP_SUPPORT: -+ /* RH port supports HNP */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ pcd->a_hnp_support = 1; -+ dwc_otg_pcd_update_otg(pcd, 0); -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ -+ case UF_DEVICE_A_ALT_HNP_SUPPORT: -+ /* other RH port does */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); -+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { -+ pcd->a_alt_hnp_support = 1; -+ dwc_otg_pcd_update_otg(pcd, 0); -+ } else { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ break; -+ -+ default: -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ -+ } -+ do_setup_in_status_phase(pcd); -+ break; -+ -+ case UT_INTERFACE: -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ -+ case UT_ENDPOINT: -+ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) { -+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); -+ if (ep == 0) { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ ep->stopped = 1; -+ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); -+ } -+ do_setup_in_status_phase(pcd); -+ break; -+ } -+} -+ -+/** -+ * This function process the CLEAR_FEATURE Setup Commands. -+ */ -+static inline void do_clear_feature(dwc_otg_pcd_t * pcd) -+{ -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep = 0; -+ -+ DWC_DEBUGPL(DBG_PCD, -+ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+ -+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) { -+ case UT_DEVICE: -+ switch (UGETW(ctrl.wValue)) { -+ case UF_DEVICE_REMOTE_WAKEUP: -+ pcd->remote_wakeup_enable = 0; -+ break; -+ -+ case UF_TEST_MODE: -+ /** @todo Add CLEAR_FEATURE for TEST modes. */ -+ break; -+ -+ default: -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ do_setup_in_status_phase(pcd); -+ break; -+ -+ case UT_ENDPOINT: -+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex)); -+ if (ep == 0) { -+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED); -+ return; -+ } -+ -+ pcd_clear_halt(pcd, ep); -+ -+ break; -+ } -+} -+ -+/** -+ * This function process the SET_ADDRESS Setup Commands. -+ */ -+static inline void do_set_address(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ -+ if (ctrl.bmRequestType == UT_DEVICE) { -+ dcfg_data_t dcfg = {.d32 = 0 }; -+ -+#ifdef DEBUG_EP0 -+// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); -+#endif -+ dcfg.b.devaddr = UGETW(ctrl.wValue); -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); -+ do_setup_in_status_phase(pcd); -+ } -+} -+ -+/** -+ * This function processes SETUP commands. In Linux, the USB Command -+ * processing is done in two places - the first being the PCD and the -+ * second in the Gadget Driver (for example, the File-Backed Storage -+ * Gadget Driver). -+ * -+ * <table> -+ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr> -+ * -+ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as -+ * defined in chapter 9 of the USB 2.0 Specification chapter 9 -+ * </td></tr> -+ * -+ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint -+ * requests are the ENDPOINT_HALT feature is procesed, all others the -+ * interface requests are ignored.</td></tr> -+ * -+ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint -+ * requests are processed by the PCD. Interface requests are passed -+ * to the Gadget Driver.</td></tr> -+ * -+ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg, -+ * with device address received </td></tr> -+ * -+ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the -+ * requested descriptor</td></tr> -+ * -+ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional - -+ * not implemented by any of the existing Gadget Drivers.</td></tr> -+ * -+ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable -+ * all EPs and enable EPs for new configuration.</td></tr> -+ * -+ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return -+ * the current configuration</td></tr> -+ * -+ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all -+ * EPs and enable EPs for new configuration.</td></tr> -+ * -+ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the -+ * current interface.</td></tr> -+ * -+ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug -+ * message.</td></tr> -+ * </table> -+ * -+ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are -+ * processed by pcd_setup. Calling the Function Driver's setup function from -+ * pcd_setup processes the gadget SETUP commands. -+ */ -+static inline void pcd_setup(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ usb_device_request_t ctrl = pcd->setup_pkt->req; -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ -+ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; -+ -+#ifdef DWC_UTE_CFI -+ int retval = 0; -+ struct cfi_usb_ctrlrequest cfi_req; -+#endif -+ -+ doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz); -+ -+ /** In BDMA more then 1 setup packet is not supported till 3.00a */ -+ if (core_if->dma_enable && core_if->dma_desc_enable == 0 -+ && (doeptsize0.b.supcnt < 2) -+ && (core_if->snpsid < OTG_CORE_REV_2_94a)) { -+ DWC_ERROR -+ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); -+ } -+ if ((core_if->snpsid >= OTG_CORE_REV_3_00a) -+ && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) { -+ ctrl = -+ (pcd->setup_pkt + -+ (3 - doeptsize0.b.supcnt - 1 + -+ ep0->dwc_ep.stp_rollover))->req; -+ } -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", -+ ctrl.bmRequestType, ctrl.bRequest, -+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex), -+ UGETW(ctrl.wLength)); -+#endif -+ -+ /* Clean up the request queue */ -+ dwc_otg_request_nuke(ep0); -+ ep0->stopped = 0; -+ -+ if (ctrl.bmRequestType & UE_DIR_IN) { -+ ep0->dwc_ep.is_in = 1; -+ pcd->ep0state = EP0_IN_DATA_PHASE; -+ } else { -+ ep0->dwc_ep.is_in = 0; -+ pcd->ep0state = EP0_OUT_DATA_PHASE; -+ } -+ -+ if (UGETW(ctrl.wLength) == 0) { -+ ep0->dwc_ep.is_in = 1; -+ pcd->ep0state = EP0_IN_STATUS_PHASE; -+ } -+ -+ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) { -+ -+#ifdef DWC_UTE_CFI -+ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t)); -+ -+ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n", -+ ctrl.bRequestType, ctrl.bRequest); -+ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) { -+ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) { -+ retval = cfi_setup(pcd, &cfi_req); -+ if (retval < 0) { -+ ep0_do_stall(pcd, retval); -+ pcd->ep0_pending = 0; -+ return; -+ } -+ -+ /* if need gadget setup then call it and check the retval */ -+ if (pcd->cfi->need_gadget_att) { -+ retval = -+ cfi_gadget_setup(pcd, -+ &pcd-> -+ cfi->ctrl_req); -+ if (retval < 0) { -+ pcd->ep0_pending = 0; -+ return; -+ } -+ } -+ -+ if (pcd->cfi->need_status_in_complete) { -+ do_setup_in_status_phase(pcd); -+ } -+ return; -+ } -+ } -+#endif -+ -+ /* handle non-standard (class/vendor) requests in the gadget driver */ -+ do_gadget_setup(pcd, &ctrl); -+ return; -+ } -+ -+ /** @todo NGS: Handle bad setup packet? */ -+ -+/////////////////////////////////////////// -+//// --- Standard Request handling --- //// -+ -+ switch (ctrl.bRequest) { -+ case UR_GET_STATUS: -+ do_get_status(pcd); -+ break; -+ -+ case UR_CLEAR_FEATURE: -+ do_clear_feature(pcd); -+ break; -+ -+ case UR_SET_FEATURE: -+ do_set_feature(pcd); -+ break; -+ -+ case UR_SET_ADDRESS: -+ do_set_address(pcd); -+ break; -+ -+ case UR_SET_INTERFACE: -+ case UR_SET_CONFIG: -+// _pcd->request_config = 1; /* Configuration changed */ -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ -+ case UR_SYNCH_FRAME: -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ -+ default: -+ /* Call the Gadget Driver's setup functions */ -+ do_gadget_setup(pcd, &ctrl); -+ break; -+ } -+} -+ -+/** -+ * This function completes the ep0 control transfer. -+ */ -+static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *in_ep_regs = -+ dev_if->in_ep_regs[ep->dwc_ep.num]; -+#ifdef DEBUG_EP0 -+ dwc_otg_dev_out_ep_regs_t *out_ep_regs = -+ dev_if->out_ep_regs[ep->dwc_ep.num]; -+#endif -+ deptsiz0_data_t deptsiz; -+ dev_dma_desc_sts_t desc_sts; -+ dwc_otg_pcd_request_t *req; -+ int is_last = 0; -+ dwc_otg_pcd_t *pcd = ep->pcd; -+ -+#ifdef DWC_UTE_CFI -+ struct cfi_usb_ctrlrequest *ctrlreq; -+ int retval = -DWC_E_NOT_SUPPORTED; -+#endif -+ -+ desc_sts.b.bytes = 0; -+ -+ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ if (ep->dwc_ep.is_in) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); -+#endif -+ do_setup_out_status_phase(pcd); -+ } else { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); -+#endif -+ -+#ifdef DWC_UTE_CFI -+ ctrlreq = &pcd->cfi->ctrl_req; -+ -+ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) { -+ if (ctrlreq->bRequest > 0xB0 -+ && ctrlreq->bRequest < 0xBF) { -+ -+ /* Return if the PCD failed to handle the request */ -+ if ((retval = -+ pcd->cfi->ops. -+ ctrl_write_complete(pcd->cfi, -+ pcd)) < 0) { -+ CFI_INFO -+ ("ERROR setting a new value in the PCD(%d)\n", -+ retval); -+ ep0_do_stall(pcd, retval); -+ pcd->ep0_pending = 0; -+ return 0; -+ } -+ -+ /* If the gadget needs to be notified on the request */ -+ if (pcd->cfi->need_gadget_att == 1) { -+ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req); -+ retval = -+ cfi_gadget_setup(pcd, -+ &pcd->cfi-> -+ ctrl_req); -+ -+ /* Return from the function if the gadget failed to process -+ * the request properly - this should never happen !!! -+ */ -+ if (retval < 0) { -+ CFI_INFO -+ ("ERROR setting a new value in the gadget(%d)\n", -+ retval); -+ pcd->ep0_pending = 0; -+ return 0; -+ } -+ } -+ -+ CFI_INFO("%s: RETVAL=%d\n", __func__, -+ retval); -+ /* If we hit here then the PCD and the gadget has properly -+ * handled the request - so send the ZLP IN to the host. -+ */ -+ /* @todo: MAS - decide whether we need to start the setup -+ * stage based on the need_setup value of the cfi object -+ */ -+ do_setup_in_status_phase(pcd); -+ pcd->ep0_pending = 0; -+ return 1; -+ } -+ } -+#endif -+ -+ do_setup_in_status_phase(pcd); -+ } -+ pcd->ep0_pending = 0; -+ return 1; -+ } -+ -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ return 0; -+ } -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ -+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE -+ || pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ is_last = 1; -+ } else if (ep->dwc_ep.is_in) { -+ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); -+ if (core_if->dma_desc_enable != 0) -+ desc_sts = dev_if->in_desc_addr->status; -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+#endif -+ -+ if (((core_if->dma_desc_enable == 0) -+ && (deptsiz.b.xfersize == 0)) -+ || ((core_if->dma_desc_enable != 0) -+ && (desc_sts.b.bytes == 0))) { -+ req->actual = ep->dwc_ep.xfer_count; -+ /* Is a Zero Len Packet needed? */ -+ if (req->sent_zlp) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); -+#endif -+ req->sent_zlp = 0; -+ } -+ do_setup_out_status_phase(pcd); -+ } -+ } else { -+ /* ep0-OUT */ -+#ifdef DEBUG_EP0 -+ deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz); -+ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+#endif -+ req->actual = ep->dwc_ep.xfer_count; -+ -+ /* Is a Zero Len Packet needed? */ -+ if (req->sent_zlp) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); -+#endif -+ req->sent_zlp = 0; -+ } -+ /* For older cores do setup in status phase in Slave/BDMA modes, -+ * starting from 3.00 do that only in slave, and for DMA modes -+ * just re-enable ep 0 OUT here*/ -+ if (core_if->dma_enable == 0 -+ || (core_if->dma_desc_enable == 0 -+ && core_if->snpsid <= OTG_CORE_REV_2_94a)) { -+ do_setup_in_status_phase(pcd); -+ } else if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ DWC_DEBUGPL(DBG_PCDV, -+ "Enable out ep before in status phase\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ -+ /* Complete the request */ -+ if (is_last) { -+ dwc_otg_request_done(ep, req, 0); -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ return 1; -+ } -+ return 0; -+} -+ -+#ifdef DWC_UTE_CFI -+/** -+ * This function calculates traverses all the CFI DMA descriptors and -+ * and accumulates the bytes that are left to be transfered. -+ * -+ * @return The total bytes left to transfered, or a negative value as failure -+ */ -+static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep) -+{ -+ int32_t ret = 0; -+ int i; -+ struct dwc_otg_dma_desc *ddesc = NULL; -+ struct cfi_ep *cfiep; -+ -+ /* See if the pcd_ep has its respective cfi_ep mapped */ -+ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep); -+ if (!cfiep) { -+ CFI_INFO("%s: Failed to find ep\n", __func__); -+ return -1; -+ } -+ -+ ddesc = ep->dwc_ep.descs; -+ -+ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) { -+ -+#if defined(PRINT_CFI_DMA_DESCS) -+ print_desc(ddesc, ep->ep.name, i); -+#endif -+ ret += ddesc->status.b.bytes; -+ ddesc++; -+ } -+ -+ if (ret) -+ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__, -+ ret); -+ -+ return ret; -+} -+#endif -+ -+/** -+ * This function completes the request for the EP. If there are -+ * additional requests for the EP in the queue they will be started. -+ */ -+static void complete_ep(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); -+ struct device *dev = dwc_otg_pcd_to_dev(ep->pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ dwc_otg_dev_in_ep_regs_t *in_ep_regs = -+ dev_if->in_ep_regs[ep->dwc_ep.num]; -+ deptsiz_data_t deptsiz; -+ dev_dma_desc_sts_t desc_sts; -+ dwc_otg_pcd_request_t *req = 0; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ uint32_t byte_count = 0; -+ int is_last = 0; -+ int i; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num, -+ (ep->dwc_ep.is_in ? "IN" : "OUT")); -+ -+ /* Get any pending requests */ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (!req) { -+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); -+ return; -+ } -+ } else { -+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); -+ return; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); -+ -+ if (ep->dwc_ep.is_in) { -+ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz); -+ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable == 0) { -+ if (deptsiz.b.xfersize == 0 -+ && deptsiz.b.pktcnt == 0) { -+ byte_count = -+ ep->dwc_ep.xfer_len - -+ ep->dwc_ep.xfer_count; -+ -+ ep->dwc_ep.xfer_buff += byte_count; -+ ep->dwc_ep.dma_addr += byte_count; -+ ep->dwc_ep.xfer_count += byte_count; -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "%d-%s len=%d xfersize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, -+ (ep->dwc_ep. -+ is_in ? "IN" : "OUT"), -+ ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, -+ deptsiz.b.pktcnt); -+ -+ if (ep->dwc_ep.xfer_len < -+ ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer -+ (core_if, &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length transfer in case if it is queued -+ * a transfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Descriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 length. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer -+ (core_if, &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } else { -+ if (ep->dwc_ep.type == -+ DWC_OTG_EP_TYPE_ISOC) { -+ req->actual = 0; -+ dwc_otg_request_done(ep, req, 0); -+ -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ -+ /* If there is a request in the queue start it. */ -+ start_next_request(ep); -+ } else -+ DWC_WARN -+ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n", -+ ep->dwc_ep.num, -+ (ep->dwc_ep.is_in ? "IN" : "OUT"), -+ deptsiz.b.xfersize, -+ deptsiz.b.pktcnt); -+ } -+ } else { -+ dma_desc = ep->dwc_ep.desc_addr; -+ byte_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ -+#ifdef DWC_UTE_CFI -+ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, -+ ep->dwc_ep.buff_mode); -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ int residue; -+ -+ residue = cfi_calc_desc_residue(ep); -+ if (residue < 0) -+ return; -+ -+ byte_count = residue; -+ } else { -+#endif -+ for (i = 0; i < ep->dwc_ep.desc_cnt; -+ ++i) { -+ desc_sts = dma_desc->status; -+ byte_count += desc_sts.b.bytes; -+ dma_desc++; -+ } -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ if (byte_count == 0) { -+ ep->dwc_ep.xfer_count = -+ ep->dwc_ep.total_len; -+ is_last = 1; -+ } else { -+ DWC_WARN("Incomplete transfer\n"); -+ } -+ } -+ } else { -+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { -+ DWC_DEBUGPL(DBG_PCDV, -+ "%d-%s len=%d xfersize=%d pktcnt=%d\n", -+ ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT", -+ ep->dwc_ep.xfer_len, -+ deptsiz.b.xfersize, -+ deptsiz.b.pktcnt); -+ -+ /* Check if the whole transfer was completed, -+ * if no, setup transfer for next portion of data -+ */ -+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer(core_if, -+ &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length trasfer in case if it is queued -+ * a trasfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Desriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 legth. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer(core_if, -+ &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } else { -+ DWC_WARN -+ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n", -+ ep->dwc_ep.num, -+ (ep->dwc_ep.is_in ? "IN" : "OUT"), -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ } -+ } -+ } else { -+ dwc_otg_dev_out_ep_regs_t *out_ep_regs = -+ dev_if->out_ep_regs[ep->dwc_ep.num]; -+ desc_sts.d32 = 0; -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ dma_desc = ep->dwc_ep.desc_addr; -+ byte_count = 0; -+ ep->dwc_ep.sent_zlp = 0; -+ -+#ifdef DWC_UTE_CFI -+ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__, -+ ep->dwc_ep.buff_mode); -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ int residue; -+ residue = cfi_calc_desc_residue(ep); -+ if (residue < 0) -+ return; -+ byte_count = residue; -+ } else { -+#endif -+ -+ for (i = 0; i < ep->dwc_ep.desc_cnt; -+ ++i) { -+ desc_sts = dma_desc->status; -+ byte_count += desc_sts.b.bytes; -+ dma_desc++; -+ } -+ -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ /* Checking for interrupt Out transfers with not -+ * dword aligned mps sizes -+ */ -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR && -+ (ep->dwc_ep.maxpacket%4)) { -+ ep->dwc_ep.xfer_count = -+ ep->dwc_ep.total_len - byte_count; -+ if ((ep->dwc_ep.xfer_len % -+ ep->dwc_ep.maxpacket) -+ && (ep->dwc_ep.xfer_len / -+ ep->dwc_ep.maxpacket < -+ MAX_DMA_DESC_CNT)) -+ ep->dwc_ep.xfer_len -= -+ (ep->dwc_ep.desc_cnt - -+ 1) * ep->dwc_ep.maxpacket + -+ ep->dwc_ep.xfer_len % -+ ep->dwc_ep.maxpacket; -+ else -+ ep->dwc_ep.xfer_len -= -+ ep->dwc_ep.desc_cnt * -+ ep->dwc_ep.maxpacket; -+ if (ep->dwc_ep.xfer_len > 0) { -+ dwc_otg_ep_start_transfer -+ (core_if, &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } else { -+ ep->dwc_ep.xfer_count = -+ ep->dwc_ep.total_len - byte_count + -+ ((4 - -+ (ep->dwc_ep. -+ total_len & 0x3)) & 0x3); -+ is_last = 1; -+ } -+ } else { -+ deptsiz.d32 = 0; -+ deptsiz.d32 = -+ DWC_READ_REG32(&out_ep_regs->doeptsiz); -+ -+ byte_count = (ep->dwc_ep.xfer_len - -+ ep->dwc_ep.xfer_count - -+ deptsiz.b.xfersize); -+ ep->dwc_ep.xfer_buff += byte_count; -+ ep->dwc_ep.dma_addr += byte_count; -+ ep->dwc_ep.xfer_count += byte_count; -+ -+ /* Check if the whole transfer was completed, -+ * if no, setup transfer for next portion of data -+ */ -+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer(core_if, -+ &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length trasfer in case if it is queued -+ * a trasfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Desriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 legth. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer(core_if, -+ &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } -+ } else { -+ /* Check if the whole transfer was completed, -+ * if no, setup transfer for next portion of data -+ */ -+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { -+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); -+ } else if (ep->dwc_ep.sent_zlp) { -+ /* -+ * This fragment of code should initiate 0 -+ * length transfer in case if it is queued -+ * a transfer with size divisible to EPs max -+ * packet size and with usb_request zero field -+ * is set, which means that after data is transfered, -+ * it is also should be transfered -+ * a 0 length packet at the end. For Slave and -+ * Buffer DMA modes in this case SW has -+ * to initiate 2 transfers one with transfer size, -+ * and the second with 0 size. For Descriptor -+ * DMA mode SW is able to initiate a transfer, -+ * which will handle all the packets including -+ * the last 0 length. -+ */ -+ ep->dwc_ep.sent_zlp = 0; -+ dwc_otg_ep_start_zl_transfer(core_if, -+ &ep->dwc_ep); -+ } else { -+ is_last = 1; -+ } -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n", -+ &out_ep_regs->doeptsiz, ep->dwc_ep.num, -+ ep->dwc_ep.is_in ? "IN" : "OUT", -+ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count, -+ deptsiz.b.xfersize, deptsiz.b.pktcnt); -+ } -+ -+ /* Complete the request */ -+ if (is_last) { -+#ifdef DWC_UTE_CFI -+ if (ep->dwc_ep.buff_mode != BM_STANDARD) { -+ req->actual = ep->dwc_ep.cfi_req_len - byte_count; -+ } else { -+#endif -+ req->actual = ep->dwc_ep.xfer_count; -+#ifdef DWC_UTE_CFI -+ } -+#endif -+ if (req->dw_align_buf) { -+ if (!ep->dwc_ep.is_in) { -+ dwc_memcpy(req->buf, req->dw_align_buf, req->length); -+ } -+ DWC_DMA_FREE(dev, req->length, req->dw_align_buf, -+ req->dw_align_buf_dma); -+ } -+ -+ dwc_otg_request_done(ep, req, 0); -+ -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ -+ /* If there is a request in the queue start it. */ -+ start_next_request(ep); -+ } -+} -+ -+#ifdef DWC_EN_ISOC -+ -+/** -+ * This function BNA interrupt for Isochronous EPs -+ * -+ */ -+static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_ep_t *dwc_ep = &ep->dwc_ep; -+ volatile uint32_t *addr; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dwc_otg_pcd_t *pcd = ep->pcd; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ int i; -+ -+ dma_desc = -+ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); -+ -+ if (dwc_ep->is_in) { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { -+ sts.d32 = dma_desc->status.d32; -+ sts.b_iso_in.bs = BS_HOST_READY; -+ dma_desc->status.d32 = sts.d32; -+ } -+ } else { -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { -+ sts.d32 = dma_desc->status.d32; -+ sts.b_iso_out.bs = BS_HOST_READY; -+ dma_desc->status.d32 = sts.d32; -+ } -+ } -+ -+ if (dwc_ep->is_in == 0) { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep-> -+ num]->doepctl; -+ } else { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ } -+ depctl.b.epena = 1; -+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32); -+} -+ -+/** -+ * This function sets latest iso packet information(non-PTI mode) -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ dma_addr_t dma_addr; -+ uint32_t offset; -+ -+ if (ep->proc_buf_num) -+ dma_addr = ep->dma_addr1; -+ else -+ dma_addr = ep->dma_addr0; -+ -+ if (ep->is_in) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[ep->num]->dieptsiz); -+ offset = ep->data_per_frame; -+ } else { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->num]->doeptsiz); -+ offset = -+ ep->data_per_frame + -+ (0x4 & (0x4 - (ep->data_per_frame & 0x3))); -+ } -+ -+ if (!deptsiz.b.xfersize) { -+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; -+ ep->pkt_info[ep->cur_pkt].offset = -+ ep->cur_pkt_dma_addr - dma_addr; -+ ep->pkt_info[ep->cur_pkt].status = 0; -+ } else { -+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; -+ ep->pkt_info[ep->cur_pkt].offset = -+ ep->cur_pkt_dma_addr - dma_addr; -+ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA; -+ } -+ ep->cur_pkt_addr += offset; -+ ep->cur_pkt_dma_addr += offset; -+ ep->cur_pkt++; -+} -+ -+/** -+ * This function sets latest iso packet information(DDMA mode) -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP to start the transfer on. -+ * -+ */ -+static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * dwc_ep) -+{ -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ iso_pkt_info_t *iso_packet; -+ uint32_t data_per_desc; -+ uint32_t offset; -+ int i, j; -+ -+ iso_packet = dwc_ep->pkt_info; -+ -+ /** Reinit closed DMA Descriptors*/ -+ /** ISO OUT EP */ -+ if (dwc_ep->is_in == 0) { -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ offset = 0; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep-> -+ data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - -+ data_per_desc % -+ 4) : 0; -+ -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso_packet_decsriptor */ -+ iso_packet->status = -+ sts.b_iso_out.rxsts + -+ (sts.b_iso_out.bs ^ BS_DMA_DONE); -+ if (iso_packet->status) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ -+ /* Received data length */ -+ if (!sts.b_iso_out.rxbytes) { -+ iso_packet->length = -+ data_per_desc - -+ sts.b_iso_out.rxbytes; -+ } else { -+ iso_packet->length = -+ data_per_desc - -+ sts.b_iso_out.rxbytes + (4 - -+ dwc_ep->data_per_frame -+ % 4); -+ } -+ -+ iso_packet->offset = offset; -+ -+ offset += data_per_desc; -+ dma_desc++; -+ iso_packet++; -+ } -+ } -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso_packet_decsriptor */ -+ iso_packet->status = -+ sts.b_iso_out.rxsts + -+ (sts.b_iso_out.bs ^ BS_DMA_DONE); -+ if (iso_packet->status) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ -+ /* Received data length */ -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; -+ -+ iso_packet->offset = offset; -+ -+ offset += data_per_desc; -+ iso_packet++; -+ dma_desc++; -+ } -+ -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso_packet_decsriptor */ -+ iso_packet->status = -+ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE); -+ if (iso_packet->status) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ /* Received data length */ -+ if (!sts.b_iso_out.rxbytes) { -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; -+ } else { -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + -+ (4 - dwc_ep->data_per_frame % 4); -+ } -+ -+ iso_packet->offset = offset; -+ } else { -+/** ISO IN EP */ -+ -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { -+ sts.d32 = dma_desc->status.d32; -+ -+ /* Write status in iso packet descriptor */ -+ iso_packet->status = -+ sts.b_iso_in.txsts + -+ (sts.b_iso_in.bs ^ BS_DMA_DONE); -+ if (iso_packet->status != 0) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ -+ } -+ /* Bytes has been transfered */ -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; -+ -+ dma_desc++; -+ iso_packet++; -+ } -+ -+ sts.d32 = dma_desc->status.d32; -+ while (sts.b_iso_in.bs == BS_DMA_BUSY) { -+ sts.d32 = dma_desc->status.d32; -+ } -+ -+ /* Write status in iso packet descriptor ??? do be done with ERROR codes */ -+ iso_packet->status = -+ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE); -+ if (iso_packet->status != 0) { -+ iso_packet->status = -DWC_E_NO_DATA; -+ } -+ -+ /* Bytes has been transfered */ -+ iso_packet->length = -+ dwc_ep->data_per_frame - sts.b_iso_in.txbytes; -+ } -+} -+ -+/** -+ * This function reinitialize DMA Descriptors for Isochronous transfer -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP to start the transfer on. -+ * -+ */ -+static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep) -+{ -+ int i, j; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ dma_addr_t dma_ad; -+ volatile uint32_t *addr; -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ uint32_t data_per_desc; -+ -+ if (dwc_ep->is_in == 0) { -+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; -+ } else { -+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ } -+ -+ if (dwc_ep->proc_buf_num == 0) { -+ /** Buffer 0 descriptors setup */ -+ dma_ad = dwc_ep->dma_addr0; -+ } else { -+ /** Buffer 1 descriptors setup */ -+ dma_ad = dwc_ep->dma_addr1; -+ } -+ -+ /** Reinit closed DMA Descriptors*/ -+ /** ISO OUT EP */ -+ if (dwc_ep->is_in == 0) { -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ -+ sts.b_iso_out.bs = BS_HOST_READY; -+ sts.b_iso_out.rxsts = 0; -+ sts.b_iso_out.l = 0; -+ sts.b_iso_out.sp = 0; -+ sts.b_iso_out.ioc = 0; -+ sts.b_iso_out.pid = 0; -+ sts.b_iso_out.framenum = 0; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; -+ i += dwc_ep->pkt_per_frm) { -+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) { -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep-> -+ data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - -+ data_per_desc % -+ 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dma_ad += data_per_desc; -+ dma_desc++; -+ } -+ } -+ -+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) { -+ -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dma_desc++; -+ dma_ad += data_per_desc; -+ } -+ -+ sts.b_iso_out.ioc = 1; -+ sts.b_iso_out.l = dwc_ep->proc_buf_num; -+ -+ data_per_desc = -+ ((j + 1) * dwc_ep->maxpacket > -+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame - -+ j * dwc_ep->maxpacket : dwc_ep->maxpacket; -+ data_per_desc += -+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0; -+ sts.b_iso_out.rxbytes = data_per_desc; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ } else { -+/** ISO IN EP */ -+ -+ dma_desc = -+ dwc_ep->iso_desc_addr + -+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num; -+ -+ sts.b_iso_in.bs = BS_HOST_READY; -+ sts.b_iso_in.txsts = 0; -+ sts.b_iso_in.sp = 0; -+ sts.b_iso_in.ioc = 0; -+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; -+ sts.b_iso_in.framenum = dwc_ep->next_frame; -+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; -+ sts.b_iso_in.l = 0; -+ -+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) { -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ sts.b_iso_in.framenum += dwc_ep->bInterval; -+ dma_ad += dwc_ep->data_per_frame; -+ dma_desc++; -+ } -+ -+ sts.b_iso_in.ioc = 1; -+ sts.b_iso_in.l = dwc_ep->proc_buf_num; -+ -+ dma_desc->buf = dma_ad; -+ dma_desc->status.d32 = sts.d32; -+ -+ dwc_ep->next_frame = -+ sts.b_iso_in.framenum + dwc_ep->bInterval * 1; -+ } -+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; -+} -+ -+/** -+ * This function is to handle Iso EP transfer complete interrupt -+ * in case Iso out packet was dropped -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param dwc_ep The EP for wihich transfer complete was asserted -+ * -+ */ -+static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if, -+ dwc_ep_t * dwc_ep) -+{ -+ uint32_t dma_addr; -+ uint32_t drp_pkt; -+ uint32_t drp_pkt_cnt; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ int i; -+ -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[dwc_ep->num]->doeptsiz); -+ -+ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; -+ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); -+ -+ /* Setting dropped packets status */ -+ for (i = 0; i < drp_pkt_cnt; ++i) { -+ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA; -+ drp_pkt++; -+ deptsiz.b.pktcnt--; -+ } -+ -+ if (deptsiz.b.pktcnt > 0) { -+ deptsiz.b.xfersize = -+ dwc_ep->xfer_len - (dwc_ep->pkt_cnt - -+ deptsiz.b.pktcnt) * dwc_ep->maxpacket; -+ } else { -+ deptsiz.b.xfersize = 0; -+ deptsiz.b.pktcnt = 0; -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, -+ deptsiz.d32); -+ -+ if (deptsiz.b.pktcnt > 0) { -+ if (dwc_ep->proc_buf_num) { -+ dma_addr = -+ dwc_ep->dma_addr1 + dwc_ep->xfer_len - -+ deptsiz.b.xfersize; -+ } else { -+ dma_addr = -+ dwc_ep->dma_addr0 + dwc_ep->xfer_len - -+ deptsiz.b.xfersize;; -+ } -+ -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ out_ep_regs[dwc_ep->num]->doepdma, dma_addr); -+ -+ /** Re-enable endpoint, clear nak */ -+ depctl.d32 = 0; -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ -+ DWC_MODIFY_REG32(&core_if->dev_if-> -+ out_ep_regs[dwc_ep->num]->doepctl, depctl.d32, -+ depctl.d32); -+ return 0; -+ } else { -+ return 1; -+ } -+} -+ -+/** -+ * This function sets iso packets information(PTI mode) -+ * -+ * @param core_if Programming view of DWC_otg controller. -+ * @param ep The EP to start the transfer on. -+ * -+ */ -+static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep) -+{ -+ int i, j; -+ dma_addr_t dma_ad; -+ iso_pkt_info_t *packet_info = ep->pkt_info; -+ uint32_t offset; -+ uint32_t frame_data; -+ deptsiz_data_t deptsiz; -+ -+ if (ep->proc_buf_num == 0) { -+ /** Buffer 0 descriptors setup */ -+ dma_ad = ep->dma_addr0; -+ } else { -+ /** Buffer 1 descriptors setup */ -+ dma_ad = ep->dma_addr1; -+ } -+ -+ if (ep->is_in) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]-> -+ dieptsiz); -+ } else { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]-> -+ doeptsiz); -+ } -+ -+ if (!deptsiz.b.xfersize) { -+ offset = 0; -+ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) { -+ frame_data = ep->data_per_frame; -+ for (j = 0; j < ep->pkt_per_frm; ++j) { -+ -+ /* Packet status - is not set as initially -+ * it is set to 0 and if packet was sent -+ successfully, status field will remain 0*/ -+ -+ /* Bytes has been transfered */ -+ packet_info->length = -+ (ep->maxpacket < -+ frame_data) ? ep->maxpacket : frame_data; -+ -+ /* Received packet offset */ -+ packet_info->offset = offset; -+ offset += packet_info->length; -+ frame_data -= packet_info->length; -+ -+ packet_info++; -+ } -+ } -+ return 1; -+ } else { -+ /* This is a workaround for in case of Transfer Complete with -+ * PktDrpSts interrupts merging - in this case Transfer complete -+ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts -+ * set and with DOEPTSIZ register non zero. Investigations showed, -+ * that this happens when Out packet is dropped, but because of -+ * interrupts merging during first interrupt handling PktDrpSts -+ * bit is cleared and for next merged interrupts it is not reset. -+ * In this case SW hadles the interrupt as if PktDrpSts bit is set. -+ */ -+ if (ep->is_in) { -+ return 1; -+ } else { -+ return handle_iso_out_pkt_dropped(core_if, ep); -+ } -+ } -+} -+ -+/** -+ * This function is to handle Iso EP transfer complete interrupt -+ * -+ * @param pcd The PCD -+ * @param ep The EP for which transfer complete was asserted -+ * -+ */ -+static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); -+ dwc_ep_t *dwc_ep = &ep->dwc_ep; -+ uint8_t is_last = 0; -+ -+ if (ep->dwc_ep.next_frame == 0xffffffff) { -+ DWC_WARN("Next frame is not set!\n"); -+ return; -+ } -+ -+ if (core_if->dma_enable) { -+ if (core_if->dma_desc_enable) { -+ set_ddma_iso_pkts_info(core_if, dwc_ep); -+ reinit_ddma_iso_xfer(core_if, dwc_ep); -+ is_last = 1; -+ } else { -+ if (core_if->pti_enh_enable) { -+ if (set_iso_pkts_info(core_if, dwc_ep)) { -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ dwc_otg_iso_ep_start_buf_transfer -+ (core_if, dwc_ep); -+ is_last = 1; -+ } -+ } else { -+ set_current_pkt_info(core_if, dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ is_last = 1; -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr0; -+ } -+ -+ } -+ dwc_otg_iso_ep_start_frm_transfer(core_if, -+ dwc_ep); -+ } -+ } -+ } else { -+ set_current_pkt_info(core_if, dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ is_last = 1; -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; -+ } -+ -+ } -+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); -+ } -+ if (is_last) -+ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle); -+} -+#endif /* DWC_EN_ISOC */ -+ -+/** -+ * This function handle BNA interrupt for Non Isochronous EPs -+ * -+ */ -+static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep) -+{ -+ dwc_ep_t *dwc_ep = &ep->dwc_ep; -+ volatile uint32_t *addr; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dwc_otg_pcd_t *pcd = ep->pcd; -+ dwc_otg_dev_dma_desc_t *dma_desc; -+ dev_dma_desc_sts_t sts = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if = ep->pcd->core_if; -+ int i, start; -+ -+ if (!dwc_ep->desc_cnt) -+ DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num, -+ (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt); -+ -+ if (core_if->core_params->cont_on_bna && !dwc_ep->is_in -+ && dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) { -+ uint32_t doepdma; -+ dwc_otg_dev_out_ep_regs_t *out_regs = -+ core_if->dev_if->out_ep_regs[dwc_ep->num]; -+ doepdma = DWC_READ_REG32(&(out_regs->doepdma)); -+ start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t); -+ dma_desc = &(dwc_ep->desc_addr[start]); -+ } else { -+ start = 0; -+ dma_desc = dwc_ep->desc_addr; -+ } -+ -+ -+ for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) { -+ sts.d32 = dma_desc->status.d32; -+ sts.b.bs = BS_HOST_READY; -+ dma_desc->status.d32 = sts.d32; -+ } -+ -+ if (dwc_ep->is_in == 0) { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]-> -+ doepctl; -+ } else { -+ addr = -+ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; -+ } -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ DWC_MODIFY_REG32(addr, 0, depctl.d32); -+} -+ -+/** -+ * This function handles EP0 Control transfers. -+ * -+ * The state of the control transfers are tracked in -+ * <code>ep0state</code>. -+ */ -+static void handle_ep0(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; -+ dev_dma_desc_sts_t desc_sts; -+ deptsiz0_data_t deptsiz; -+ uint32_t byte_count; -+ -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); -+ print_ep0_state(pcd); -+#endif -+ -+// DWC_PRINTF("HANDLE EP0\n"); -+ -+ switch (pcd->ep0state) { -+ case EP0_DISCONNECT: -+ break; -+ -+ case EP0_IDLE: -+ pcd->request_config = 0; -+ -+ pcd_setup(pcd); -+ break; -+ -+ case EP0_IN_DATA_PHASE: -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", -+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), -+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); -+#endif -+ -+ if (core_if->dma_enable != 0) { -+ /* -+ * For EP0 we can only program 1 packet at a time so we -+ * need to do the make calculations after each complete. -+ * Call write_packet to make the calculations, as in -+ * slave mode, and use those values to determine if we -+ * can complete. -+ */ -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->in_ep_regs[0]-> -+ dieptsiz); -+ byte_count = -+ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; -+ } else { -+ desc_sts = -+ core_if->dev_if->in_desc_addr->status; -+ byte_count = -+ ep0->dwc_ep.xfer_len - desc_sts.b.bytes; -+ } -+ ep0->dwc_ep.xfer_count += byte_count; -+ ep0->dwc_ep.xfer_buff += byte_count; -+ ep0->dwc_ep.dma_addr += byte_count; -+ } -+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); -+ } else if (ep0->dwc_ep.sent_zlp) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ ep0->dwc_ep.sent_zlp = 0; -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); -+ } else { -+ ep0_complete_request(ep0); -+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); -+ } -+ break; -+ case EP0_OUT_DATA_PHASE: -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", -+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"), -+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); -+#endif -+ if (core_if->dma_enable != 0) { -+ if (core_if->dma_desc_enable == 0) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if-> -+ dev_if->out_ep_regs[0]-> -+ doeptsiz); -+ byte_count = -+ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; -+ } else { -+ desc_sts = -+ core_if->dev_if->out_desc_addr->status; -+ byte_count = -+ ep0->dwc_ep.maxpacket - desc_sts.b.bytes; -+ } -+ ep0->dwc_ep.xfer_count += byte_count; -+ ep0->dwc_ep.xfer_buff += byte_count; -+ ep0->dwc_ep.dma_addr += byte_count; -+ } -+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); -+ } else if (ep0->dwc_ep.sent_zlp) { -+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd), -+ &ep0->dwc_ep); -+ ep0->dwc_ep.sent_zlp = 0; -+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n"); -+ } else { -+ ep0_complete_request(ep0); -+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); -+ } -+ break; -+ -+ case EP0_IN_STATUS_PHASE: -+ case EP0_OUT_STATUS_PHASE: -+ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); -+ ep0_complete_request(ep0); -+ pcd->ep0state = EP0_IDLE; -+ ep0->stopped = 1; -+ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ -+ -+ /* Prepare for more SETUP Packets */ -+ if (core_if->dma_enable) { -+ ep0_out_start(core_if, pcd); -+ } -+ break; -+ -+ case EP0_STALL: -+ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); -+ break; -+ } -+#ifdef DEBUG_EP0 -+ print_ep0_state(pcd); -+#endif -+} -+ -+/** -+ * Restart transfer -+ */ -+static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if; -+ dwc_otg_dev_if_t *dev_if; -+ deptsiz_data_t dieptsiz = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep; -+ -+ ep = get_in_ep(pcd, epnum); -+ -+#ifdef DWC_EN_ISOC -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ return; -+ } -+#endif /* DWC_EN_ISOC */ -+ -+ core_if = GET_CORE_IF(pcd); -+ dev_if = core_if->dev_if; -+ -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); -+ -+ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x" -+ " stopped=%d\n", ep->dwc_ep.xfer_buff, -+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped); -+ /* -+ * If xfersize is 0 and pktcnt in not 0, resend the last packet. -+ */ -+ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && -+ ep->dwc_ep.start_xfer_buff != 0) { -+ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { -+ ep->dwc_ep.xfer_count = 0; -+ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; -+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; -+ } else { -+ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; -+ /* convert packet size to dwords. */ -+ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; -+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; -+ } -+ ep->stopped = 0; -+ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x " -+ "xfer_len=%0x stopped=%d\n", -+ ep->dwc_ep.xfer_buff, -+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, -+ ep->stopped); -+ if (epnum == 0) { -+ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); -+ } else { -+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); -+ } -+ } -+} -+ -+/* -+ * This function create new nextep sequnce based on Learn Queue. -+ * -+ * @param core_if Programming view of DWC_otg controller -+ */ -+void predict_nextep_seq( dwc_otg_core_if_t * core_if) -+{ -+ dwc_otg_device_global_regs_t *dev_global_regs = -+ core_if->dev_if->dev_global_regs; -+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; -+ /* Number of Token Queue Registers */ -+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; -+ dtknq1_data_t dtknqr1; -+ uint32_t in_tkn_epnums[4]; -+ uint8_t seqnum[MAX_EPS_CHANNELS]; -+ uint8_t intkn_seq[TOKEN_Q_DEPTH]; -+ grstctl_t resetctl = {.d32 = 0 }; -+ uint8_t temp; -+ int ndx = 0; -+ int start = 0; -+ int end = 0; -+ int sort_done = 0; -+ int i = 0; -+ volatile uint32_t *addr = &dev_global_regs->dtknqr1; -+ -+ -+ DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); -+ -+ /* Read the DTKNQ Registers */ -+ for (i = 0; i < DTKNQ_REG_CNT; i++) { -+ in_tkn_epnums[i] = DWC_READ_REG32(addr); -+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1, -+ in_tkn_epnums[i]); -+ if (addr == &dev_global_regs->dvbusdis) { -+ addr = &dev_global_regs->dtknqr3_dthrctl; -+ } else { -+ ++addr; -+ } -+ -+ } -+ -+ /* Copy the DTKNQR1 data to the bit field. */ -+ dtknqr1.d32 = in_tkn_epnums[0]; -+ if (dtknqr1.b.wrap_bit) { -+ ndx = dtknqr1.b.intknwptr; -+ end = ndx -1; -+ if (end < 0) -+ end = TOKEN_Q_DEPTH -1; -+ } else { -+ ndx = 0; -+ end = dtknqr1.b.intknwptr -1; -+ if (end < 0) -+ end = 0; -+ } -+ start = ndx; -+ -+ /* Fill seqnum[] by initial values: EP number + 31 */ -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ seqnum[i] = i +31; -+ } -+ -+ /* Fill intkn_seq[] from in_tkn_epnums[0] */ -+ for (i=0; i < 6; i++) -+ intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf; -+ -+ if (TOKEN_Q_DEPTH > 6) { -+ /* Fill intkn_seq[] from in_tkn_epnums[1] */ -+ for (i=6; i < 14; i++) -+ intkn_seq[i] = -+ (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf; -+ } -+ -+ if (TOKEN_Q_DEPTH > 14) { -+ /* Fill intkn_seq[] from in_tkn_epnums[1] */ -+ for (i=14; i < 22; i++) -+ intkn_seq[i] = -+ (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf; -+ } -+ -+ if (TOKEN_Q_DEPTH > 22) { -+ /* Fill intkn_seq[] from in_tkn_epnums[1] */ -+ for (i=22; i < 30; i++) -+ intkn_seq[i] = -+ (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf; -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__, -+ start, end); -+ for (i=0; i<TOKEN_Q_DEPTH; i++) -+ DWC_DEBUGPL(DBG_PCDV,"%d\n", intkn_seq[i]); -+ -+ /* Update seqnum based on intkn_seq[] */ -+ i = 0; -+ do { -+ seqnum[intkn_seq[ndx]] = i; -+ ndx++; -+ i++; -+ if (ndx == TOKEN_Q_DEPTH) -+ ndx = 0; -+ } while ( i < TOKEN_Q_DEPTH ); -+ -+ /* Mark non active EP's in seqnum[] by 0xff */ -+ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { -+ if (core_if->nextep_seq[i] == 0xff ) -+ seqnum[i] = 0xff; -+ } -+ -+ /* Sort seqnum[] */ -+ sort_done = 0; -+ while (!sort_done) { -+ sort_done = 1; -+ for (i=0; i<core_if->dev_if->num_in_eps; i++) { -+ if (seqnum[i] > seqnum[i+1]) { -+ temp = seqnum[i]; -+ seqnum[i] = seqnum[i+1]; -+ seqnum[i+1] = temp; -+ sort_done = 0; -+ } -+ } -+ } -+ -+ ndx = start + seqnum[0]; -+ if (ndx >= TOKEN_Q_DEPTH) -+ ndx = ndx % TOKEN_Q_DEPTH; -+ core_if->first_in_nextep_seq = intkn_seq[ndx]; -+ -+ /* Update seqnum[] by EP numbers */ -+ for (i=0; i<=core_if->dev_if->num_in_eps; i++) { -+ ndx = start + i; -+ if (seqnum[i] < 31) { -+ ndx = start + seqnum[i]; -+ if (ndx >= TOKEN_Q_DEPTH) -+ ndx = ndx % TOKEN_Q_DEPTH; -+ seqnum[i] = intkn_seq[ndx]; -+ } else { -+ if (seqnum[i] < 0xff) { -+ seqnum[i] = seqnum[i] - 31; -+ } else { -+ break; -+ } -+ } -+ } -+ -+ /* Update nextep_seq[] based on seqnum[] */ -+ for (i=0; i<core_if->dev_if->num_in_eps; i++) { -+ if (seqnum[i] != 0xff) { -+ if (seqnum[i+1] != 0xff) { -+ core_if->nextep_seq[seqnum[i]] = seqnum[i+1]; -+ } else { -+ core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq; -+ break; -+ } -+ } else { -+ break; -+ } -+ } -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n", -+ __func__, core_if->first_in_nextep_seq); -+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) { -+ DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]); -+ } -+ -+ /* Flush the Learning Queue */ -+ resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl); -+ resetctl.b.intknqflsh = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32); -+ -+ -+} -+ -+/** -+ * handle the IN EP disable interrupt. -+ */ -+static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ deptsiz_data_t dieptsiz = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ gintmsk_data_t gintmsk_data; -+ depctl_data_t depctl; -+ uint32_t diepdma; -+ uint32_t remain_to_transfer = 0; -+ uint8_t i; -+ uint32_t xfer_size; -+ -+ ep = get_in_ep(pcd, epnum); -+ dwc_ep = &ep->dwc_ep; -+ -+ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); -+ complete_ep(ep); -+ return; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum, -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl)); -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz); -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); -+ -+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", -+ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); -+ -+ if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) { -+ if (ep->stopped) { -+ if (core_if->en_multiple_tx_fifo) -+ /* Flush the Tx FIFO */ -+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); -+ /* Clear the Global IN NP NAK */ -+ dctl.d32 = 0; -+ dctl.b.cgnpinnak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ /* Restart the transaction */ -+ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { -+ restart_transfer(pcd, epnum); -+ } -+ } else { -+ /* Restart the transaction */ -+ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) { -+ restart_transfer(pcd, epnum); -+ } -+ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); -+ } -+ return; -+ } -+ -+ if (core_if->start_predict > 2) { // NP IN EP -+ core_if->start_predict--; -+ return; -+ } -+ -+ core_if->start_predict--; -+ -+ if (core_if->start_predict == 1) { // All NP IN Ep's disabled now -+ -+ predict_nextep_seq(core_if); -+ -+ /* Update all active IN EP's NextEP field based of nextep_seq[] */ -+ for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) { -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (core_if->nextep_seq[i] != 0xff) { // Active NP IN EP -+ depctl.b.nextep = core_if->nextep_seq[i]; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); -+ } -+ } -+ /* Flush Shared NP TxFIFO */ -+ dwc_otg_flush_tx_fifo(core_if, 0); -+ /* Rewind buffers */ -+ if (!core_if->dma_desc_enable) { -+ i = core_if->first_in_nextep_seq; -+ do { -+ ep = get_in_ep(pcd, i); -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); -+ xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count; -+ if (xfer_size > ep->dwc_ep.maxxfer) -+ xfer_size = ep->dwc_ep.maxxfer; -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (dieptsiz.b.pktcnt != 0) { -+ if (xfer_size == 0) { -+ remain_to_transfer = 0; -+ } else { -+ if ((xfer_size % ep->dwc_ep.maxpacket) == 0) { -+ remain_to_transfer = -+ dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket; -+ } else { -+ remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket) -+ + (xfer_size % ep->dwc_ep.maxpacket); -+ } -+ } -+ diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma); -+ dieptsiz.b.xfersize = remain_to_transfer; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32); -+ diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer); -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma); -+ } -+ i = core_if->nextep_seq[i]; -+ } while (i != core_if->first_in_nextep_seq); -+ } else { // dma_desc_enable -+ DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__); -+ } -+ -+ /* Restart transfers in predicted sequences */ -+ i = core_if->first_in_nextep_seq; -+ do { -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (dieptsiz.b.pktcnt != 0) { -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ depctl.b.epena = 1; -+ depctl.b.cnak = 1; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); -+ } -+ i = core_if->nextep_seq[i]; -+ } while (i != core_if->first_in_nextep_seq); -+ -+ /* Clear the global non-periodic IN NAK handshake */ -+ dctl.d32 = 0; -+ dctl.b.cgnpinnak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ -+ /* Unmask EP Mismatch interrupt */ -+ gintmsk_data.d32 = 0; -+ gintmsk_data.b.epmismatch = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32); -+ -+ core_if->start_predict = 0; -+ -+ } -+} -+ -+/** -+ * Handler for the IN EP timeout handshake interrupt. -+ */ -+static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ -+#ifdef DEBUG -+ deptsiz_data_t dieptsiz = {.d32 = 0 }; -+ uint32_t num = 0; -+#endif -+ dctl_data_t dctl = {.d32 = 0 }; -+ dwc_otg_pcd_ep_t *ep; -+ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ ep = get_in_ep(pcd, epnum); -+ -+ /* Disable the NP Tx Fifo Empty Interrrupt */ -+ if (!core_if->dma_enable) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ } -+ /** @todo NGS Check EP type. -+ * Implement for Periodic EPs */ -+ /* -+ * Non-periodic EP -+ */ -+ /* Enable the Global IN NAK Effective Interrupt */ -+ intr_mask.b.ginnakeff = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32); -+ -+ /* Set Global IN NAK */ -+ dctl.b.sgnpinnak = 1; -+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); -+ -+ ep->stopped = 1; -+ -+#ifdef DEBUG -+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz); -+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", -+ dieptsiz.b.pktcnt, dieptsiz.b.xfersize); -+#endif -+ -+#ifdef DISABLE_PERIODIC_EP -+ /* -+ * Set the NAK bit for this EP to -+ * start the disable process. -+ */ -+ diepctl.d32 = 0; -+ diepctl.b.snak = 1; -+ DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, -+ diepctl.d32); -+ ep->disabling = 1; -+ ep->stopped = 1; -+#endif -+} -+ -+/** -+ * Handler for the IN EP NAK interrupt. -+ */ -+static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ diepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.nak = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ diepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * Handler for the OUT EP Babble interrupt. -+ */ -+static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ doepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", -+ "OUT EP Babble"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.babble = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * Handler for the OUT EP NAK interrupt. -+ */ -+static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ doepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.nak = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * Handler for the OUT EP NYET interrupt. -+ */ -+static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd, -+ const uint32_t epnum) -+{ -+ /** @todo implement ISR */ -+ dwc_otg_core_if_t *core_if; -+ doepmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); -+ core_if = GET_CORE_IF(pcd); -+ intr_mask.b.nyet = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs-> -+ doepeachintmsk[epnum], intr_mask.d32, 0); -+ } else { -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ intr_mask.d32, 0); -+ } -+ -+ return 1; -+} -+ -+/** -+ * This interrupt indicates that an IN EP has a pending Interrupt. -+ * The sequence for handling the IN EP interrupt is shown below: -+ * -# Read the Device All Endpoint Interrupt register -+ * -# Repeat the following for each IN EP interrupt bit set (from -+ * LSB to MSB). -+ * -# Read the Device Endpoint Interrupt (DIEPINTn) register -+ * -# If "Transfer Complete" call the request complete function -+ * -# If "Endpoint Disabled" complete the EP disable procedure. -+ * -# If "AHB Error Interrupt" log error -+ * -# If "Time-out Handshake" log error -+ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx -+ * FIFO. -+ * -# If "IN Token EP Mismatch" (disable, this is handled by EP -+ * Mismatch Interrupt) -+ */ -+static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd) -+{ -+#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ -+do { \ -+ diepint_data_t diepint = {.d32=0}; \ -+ diepint.b.__intr = 1; \ -+ DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ -+ diepint.d32); \ -+} while (0) -+ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ dwc_otg_dev_if_t *dev_if = core_if->dev_if; -+ diepint_data_t diepint = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ uint32_t ep_intr; -+ uint32_t epnum = 0; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); -+ -+ /* Read in the device interrupt bits */ -+ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); -+ -+ /* Service the Device IN interrupts for each endpoint */ -+ while (ep_intr) { -+ if (ep_intr & 0x1) { -+ uint32_t empty_msk; -+ /* Get EP pointer */ -+ ep = get_in_ep(pcd, epnum); -+ dwc_ep = &ep->dwc_ep; -+ -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); -+ empty_msk = -+ DWC_READ_REG32(&dev_if-> -+ dev_global_regs->dtknqr4_fifoemptymsk); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", -+ epnum, empty_msk, depctl.d32); -+ -+ DWC_DEBUGPL(DBG_PCD, -+ "EP%d-%s: type=%d, mps=%d\n", -+ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), -+ dwc_ep->type, dwc_ep->maxpacket); -+ -+ diepint.d32 = -+ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); -+ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP %d Interrupt Register - 0x%x\n", epnum, -+ diepint.d32); -+ /* Transfer complete */ -+ if (diepint.b.xfercompl) { -+ /* Disable the NP Tx FIFO Empty -+ * Interrupt */ -+ if (core_if->en_multiple_tx_fifo == 0) { -+ intr_mask.b.nptxfempty = 1; -+ DWC_MODIFY_REG32 -+ (&core_if->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ } else { -+ /* Disable the Tx FIFO Empty Interrupt for this EP */ -+ uint32_t fifoemptymsk = -+ 0x1 << dwc_ep->num; -+ DWC_MODIFY_REG32(&core_if-> -+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk, -+ fifoemptymsk, 0); -+ } -+ /* Clear the bit in DIEPINTn for this interrupt */ -+ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl); -+ -+ /* Complete the transfer */ -+ if (epnum == 0) { -+ handle_ep0(pcd); -+ } -+#ifdef DWC_EN_ISOC -+ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (!ep->stopped) -+ complete_iso_ep(pcd, ep); -+ } -+#endif /* DWC_EN_ISOC */ -+#ifdef DWC_UTE_PER_IO -+ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (!ep->stopped) -+ complete_xiso_ep(ep); -+ } -+#endif /* DWC_UTE_PER_IO */ -+ else { -+ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC && -+ dwc_ep->bInterval > 1) { -+ dwc_ep->frame_num += dwc_ep->bInterval; -+ if (dwc_ep->frame_num > 0x3FFF) -+ { -+ dwc_ep->frm_overrun = 1; -+ dwc_ep->frame_num &= 0x3FFF; -+ } else -+ dwc_ep->frm_overrun = 0; -+ } -+ complete_ep(ep); -+ if(diepint.b.nak) -+ CLEAR_IN_EP_INTR(core_if, epnum, nak); -+ } -+ } -+ /* Endpoint disable */ -+ if (diepint.b.epdisabled) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n", -+ epnum); -+ handle_in_ep_disable_intr(pcd, epnum); -+ -+ /* Clear the bit in DIEPINTn for this interrupt */ -+ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled); -+ } -+ /* AHB Error */ -+ if (diepint.b.ahberr) { -+ DWC_ERROR("EP%d IN AHB Error\n", epnum); -+ /* Clear the bit in DIEPINTn for this interrupt */ -+ CLEAR_IN_EP_INTR(core_if, epnum, ahberr); -+ } -+ /* TimeOUT Handshake (non-ISOC IN EPs) */ -+ if (diepint.b.timeout) { -+ DWC_ERROR("EP%d IN Time-out\n", epnum); -+ handle_in_ep_timeout_intr(pcd, epnum); -+ -+ CLEAR_IN_EP_INTR(core_if, epnum, timeout); -+ } -+ /** IN Token received with TxF Empty */ -+ if (diepint.b.intktxfemp) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d IN TKN TxFifo Empty\n", -+ epnum); -+ if (!ep->stopped && epnum != 0) { -+ -+ diepmsk_data_t diepmsk = {.d32 = 0 }; -+ diepmsk.b.intktxfemp = 1; -+ -+ if (core_if->multiproc_int_enable) { -+ DWC_MODIFY_REG32 -+ (&dev_if->dev_global_regs->diepeachintmsk -+ [epnum], diepmsk.d32, 0); -+ } else { -+ DWC_MODIFY_REG32 -+ (&dev_if->dev_global_regs->diepmsk, -+ diepmsk.d32, 0); -+ } -+ } else if (core_if->dma_desc_enable -+ && epnum == 0 -+ && pcd->ep0state == -+ EP0_OUT_STATUS_PHASE) { -+ // EP0 IN set STALL -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs -+ [epnum]->diepctl); -+ -+ /* set the disable and stall bits */ -+ if (depctl.b.epena) { -+ depctl.b.epdis = 1; -+ } -+ depctl.b.stall = 1; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs -+ [epnum]->diepctl, -+ depctl.d32); -+ } -+ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp); -+ } -+ /** IN Token Received with EP mismatch */ -+ if (diepint.b.intknepmis) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d IN TKN EP Mismatch\n", epnum); -+ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis); -+ } -+ /** IN Endpoint NAK Effective */ -+ if (diepint.b.inepnakeff) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d IN EP NAK Effective\n", -+ epnum); -+ /* Periodic EP */ -+ if (ep->disabling) { -+ depctl.d32 = 0; -+ depctl.b.snak = 1; -+ depctl.b.epdis = 1; -+ DWC_MODIFY_REG32(&dev_if->in_ep_regs -+ [epnum]->diepctl, -+ depctl.d32, -+ depctl.d32); -+ } -+ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff); -+ -+ } -+ -+ /** IN EP Tx FIFO Empty Intr */ -+ if (diepint.b.emptyintr) { -+ DWC_DEBUGPL(DBG_ANY, -+ "EP%d Tx FIFO Empty Intr \n", -+ epnum); -+ write_empty_tx_fifo(pcd, epnum); -+ -+ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr); -+ -+ } -+ -+ /** IN EP BNA Intr */ -+ if (diepint.b.bna) { -+ CLEAR_IN_EP_INTR(core_if, epnum, bna); -+ if (core_if->dma_desc_enable) { -+#ifdef DWC_EN_ISOC -+ if (dwc_ep->type == -+ DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * This checking is performed to prevent first "false" BNA -+ * handling occuring right after reconnect -+ */ -+ if (dwc_ep->next_frame != -+ 0xffffffff) -+ dwc_otg_pcd_handle_iso_bna(ep); -+ } else -+#endif /* DWC_EN_ISOC */ -+ { -+ dwc_otg_pcd_handle_noniso_bna(ep); -+ } -+ } -+ } -+ /* NAK Interrutp */ -+ if (diepint.b.nak) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n", -+ epnum); -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ depctl_data_t depctl; -+ if (ep->dwc_ep.frame_num == 0xFFFFFFFF) { -+ ep->dwc_ep.frame_num = core_if->frame_num; -+ if (ep->dwc_ep.bInterval > 1) { -+ depctl.d32 = 0; -+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl); -+ if (ep->dwc_ep.frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ depctl.b.setd0pid = 0; -+ } else { -+ depctl.b.setd0pid = 1; -+ depctl.b.setd1pid = 0; -+ } -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); -+ } -+ start_next_request(ep); -+ } -+ ep->dwc_ep.frame_num += ep->dwc_ep.bInterval; -+ if (dwc_ep->frame_num > 0x3FFF) { -+ dwc_ep->frm_overrun = 1; -+ dwc_ep->frame_num &= 0x3FFF; -+ } else -+ dwc_ep->frm_overrun = 0; -+ } -+ -+ CLEAR_IN_EP_INTR(core_if, epnum, nak); -+ } -+ } -+ epnum++; -+ ep_intr >>= 1; -+ } -+ -+ return 1; -+#undef CLEAR_IN_EP_INTR -+} -+ -+/** -+ * This interrupt indicates that an OUT EP has a pending Interrupt. -+ * The sequence for handling the OUT EP interrupt is shown below: -+ * -# Read the Device All Endpoint Interrupt register -+ * -# Repeat the following for each OUT EP interrupt bit set (from -+ * LSB to MSB). -+ * -# Read the Device Endpoint Interrupt (DOEPINTn) register -+ * -# If "Transfer Complete" call the request complete function -+ * -# If "Endpoint Disabled" complete the EP disable procedure. -+ * -# If "AHB Error Interrupt" log error -+ * -# If "Setup Phase Done" process Setup Packet (See Standard USB -+ * Command Processing) -+ */ -+static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd) -+{ -+#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ -+do { \ -+ doepint_data_t doepint = {.d32=0}; \ -+ doepint.b.__intr = 1; \ -+ DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ -+ doepint.d32); \ -+} while (0) -+ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ uint32_t ep_intr; -+ doepint_data_t doepint = {.d32 = 0 }; -+ uint32_t epnum = 0; -+ dwc_otg_pcd_ep_t *ep; -+ dwc_ep_t *dwc_ep; -+ dctl_data_t dctl = {.d32 = 0 }; -+ gintmsk_data_t gintmsk = {.d32 = 0 }; -+ -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); -+ -+ /* Read in the device interrupt bits */ -+ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); -+ -+ while (ep_intr) { -+ if (ep_intr & 0x1) { -+ /* Get EP pointer */ -+ ep = get_out_ep(pcd, epnum); -+ dwc_ep = &ep->dwc_ep; -+ -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP%d-%s: type=%d, mps=%d\n", -+ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"), -+ dwc_ep->type, dwc_ep->maxpacket); -+#endif -+ doepint.d32 = -+ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); -+ /* Moved this interrupt upper due to core deffect of asserting -+ * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */ -+ if (doepint.b.stsphsercvd) { -+ deptsiz0_data_t deptsiz; -+ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd); -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doeptsiz); -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a -+ && core_if->dma_enable -+ && core_if->dma_desc_enable == 0 -+ && doepint.b.xfercompl -+ && deptsiz.b.xfersize == 24) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, -+ xfercompl); -+ doepint.b.xfercompl = 0; -+ ep0_out_start(core_if, pcd); -+ } -+ if ((core_if->dma_desc_enable) || -+ (core_if->dma_enable -+ && core_if->snpsid >= -+ OTG_CORE_REV_3_00a)) { -+ do_setup_in_status_phase(pcd); -+ } -+ } -+ /* Transfer complete */ -+ if (doepint.b.xfercompl) { -+ -+ if (epnum == 0) { -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) { -+ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint), -+ doepint.d32); -+ DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n", -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl)); -+ -+ if (core_if->snpsid >= OTG_CORE_REV_3_00a -+ && core_if->dma_enable == 0) { -+ doepint_data_t doepint; -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doepint); -+ if (pcd->ep0state == EP0_IDLE && doepint.b.sr) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, sr); -+ goto exit_xfercompl; -+ } -+ } -+ /* In case of DDMA look at SR bit to go to the Data Stage */ -+ if (core_if->dma_desc_enable) { -+ dev_dma_desc_sts_t status = {.d32 = 0}; -+ if (pcd->ep0state == EP0_IDLE) { -+ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> -+ dev_if->setup_desc_index]->status.d32; -+ if(pcd->data_terminated) { -+ pcd->data_terminated = 0; -+ status.d32 = core_if->dev_if->out_desc_addr->status.d32; -+ dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8); -+ } -+ if (status.b.sr) { -+ if (doepint.b.setup) { -+ DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n"); -+ /* Already started data stage, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ /* Prepare for more setup packets */ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE || -+ pcd->ep0state == EP0_IN_DATA_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP0_IDLE SR=1 setup=0 new setup comes\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ } else { -+ dwc_otg_pcd_request_t *req; -+ dev_dma_desc_sts_t status = {.d32 = 0}; -+ diepint_data_t diepint0; -+ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ -+ if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) { -+ DWC_ERROR("EP0 is stalled/disconnected\n"); -+ } -+ -+ /* Clear IN xfercompl if set */ -+ if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE -+ || pcd->ep0state == EP0_IN_DATA_PHASE)) { -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint, diepint0.d32); -+ } -+ -+ status.d32 = core_if->dev_if->setup_desc_addr[core_if-> -+ dev_if->setup_desc_index]->status.d32; -+ -+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len -+ && (pcd->ep0state == EP0_OUT_DATA_PHASE)) -+ status.d32 = core_if->dev_if->out_desc_addr->status.d32; -+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE) -+ status.d32 = core_if->dev_if-> -+ out_desc_addr->status.d32; -+ -+ if (status.b.sr) { -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); -+ } else { -+ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && -+ pcd->ep0state == EP0_OUT_DATA_PHASE) { -+ /* Read arrived setup packet from req->buf */ -+ dwc_memcpy(&pcd->setup_pkt->req, -+ req->buf + ep->dwc_ep.xfer_count, 8); -+ } -+ req->actual = ep->dwc_ep.xfer_count; -+ dwc_otg_request_done(ep, req, -ECONNRESET); -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ } -+ pcd->ep0state = EP0_IDLE; -+ if (doepint.b.setup) { -+ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); -+ /* Data stage started, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ /* Prepare for setup packets if ep0in was enabled*/ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ } -+ } -+ if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable -+ && core_if->dma_desc_enable == 0) { -+ doepint_data_t doepint_temp = {.d32 = 0}; -+ deptsiz0_data_t doeptsize0 = {.d32 = 0 }; -+ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->dwc_ep.num]->doepint); -+ doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->dwc_ep.num]->doeptsiz); -+ if (pcd->ep0state == EP0_IDLE) { -+ if (doepint_temp.b.sr) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, sr); -+ } -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doepint); -+ if (doeptsize0.b.supcnt == 3) { -+ DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n"); -+ ep->dwc_ep.stp_rollover = 1; -+ } -+ if (doepint.b.setup) { -+retry: -+ /* Already started data stage, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ ep->dwc_ep.stp_rollover = 0; -+ /* Prepare for more setup packets */ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE || -+ pcd->ep0state == EP0_IN_DATA_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_ANY, -+ "EP0_IDLE SR=1 setup=0 new setup comes\n"); -+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[0]->doepint); -+ if(doepint.b.setup) -+ goto retry; -+ ep0_out_start(core_if, pcd); -+ } -+ } else { -+ dwc_otg_pcd_request_t *req; -+ diepint_data_t diepint0 = {.d32 = 0}; -+ doepint_data_t doepint_temp = {.d32 = 0}; -+ depctl_data_t diepctl0; -+ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepctl); -+ -+ if (pcd->ep0state == EP0_IN_DATA_PHASE -+ || pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ if (diepint0.b.xfercompl) { -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint, diepint0.d32); -+ } -+ if (diepctl0.b.epena) { -+ diepint_data_t diepint = {.d32 = 0}; -+ diepctl0.b.snak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepctl, diepctl0.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ } while (!diepint.b.inepnakeff); -+ diepint.b.inepnakeff = 1; -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint, diepint.d32); -+ diepctl0.d32 = 0; -+ diepctl0.b.epdis = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl, -+ diepctl0.d32); -+ do { -+ dwc_udelay(10); -+ diepint.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ in_ep_regs[0]->diepint); -+ } while (!diepint.b.epdisabled); -+ diepint.b.epdisabled = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint, -+ diepint.d32); -+ } -+ } -+ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[ep->dwc_ep.num]->doepint); -+ if (doepint_temp.b.sr) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, sr); -+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n"); -+ } else { -+ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n"); -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len && -+ pcd->ep0state == EP0_OUT_DATA_PHASE) { -+ /* Read arrived setup packet from req->buf */ -+ dwc_memcpy(&pcd->setup_pkt->req, -+ req->buf + ep->dwc_ep.xfer_count, 8); -+ } -+ req->actual = ep->dwc_ep.xfer_count; -+ dwc_otg_request_done(ep, req, -ECONNRESET); -+ ep->dwc_ep.start_xfer_buff = 0; -+ ep->dwc_ep.xfer_buff = 0; -+ ep->dwc_ep.xfer_len = 0; -+ } -+ pcd->ep0state = EP0_IDLE; -+ if (doepint.b.setup) { -+ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n"); -+ /* Data stage started, clear setup */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ doepint.b.setup = 0; -+ handle_ep0(pcd); -+ /* Prepare for setup packets if ep0in was enabled*/ -+ if (pcd->ep0state == EP0_IN_STATUS_PHASE) { -+ ep0_out_start(core_if, pcd); -+ } -+ goto exit_xfercompl; -+ } else { -+ /* Prepare for more setup packets */ -+ DWC_DEBUGPL(DBG_PCDV, -+ "EP0_IDLE SR=1 setup=0 new setup comes 2\n"); -+ ep0_out_start(core_if, pcd); -+ } -+ } -+ } -+ } -+ if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE) -+ handle_ep0(pcd); -+exit_xfercompl: -+ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n", -+ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32); -+ } else { -+ if (core_if->dma_desc_enable == 0 -+ || pcd->ep0state != EP0_IDLE) -+ handle_ep0(pcd); -+ } -+#ifdef DWC_EN_ISOC -+ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (doepint.b.pktdrpsts == 0) { -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, -+ epnum, -+ xfercompl); -+ complete_iso_ep(pcd, ep); -+ } else { -+ -+ doepint_data_t doepint = {.d32 = 0 }; -+ doepint.b.xfercompl = 1; -+ doepint.b.pktdrpsts = 1; -+ DWC_WRITE_REG32 -+ (&core_if->dev_if->out_ep_regs -+ [epnum]->doepint, -+ doepint.d32); -+ if (handle_iso_out_pkt_dropped -+ (core_if, dwc_ep)) { -+ complete_iso_ep(pcd, -+ ep); -+ } -+ } -+#endif /* DWC_EN_ISOC */ -+#ifdef DWC_UTE_PER_IO -+ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl); -+ if (!ep->stopped) -+ complete_xiso_ep(ep); -+#endif /* DWC_UTE_PER_IO */ -+ } else { -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, -+ xfercompl); -+ -+ if (core_if->core_params->dev_out_nak) { -+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]); -+ pcd->core_if->ep_xfer_info[epnum].state = 0; -+#ifdef DEBUG -+ print_memory_payload(pcd, dwc_ep); -+#endif -+ } -+ complete_ep(ep); -+ } -+ -+ } -+ -+ /* Endpoint disable */ -+ if (doepint.b.epdisabled) { -+ -+ /* Clear the bit in DOEPINTn for this interrupt */ -+ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled); -+ if (core_if->core_params->dev_out_nak) { -+#ifdef DEBUG -+ print_memory_payload(pcd, dwc_ep); -+#endif -+ /* In case of timeout condition */ -+ if (core_if->ep_xfer_info[epnum].state == 2) { -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dctl); -+ dctl.b.cgoutnak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ /* Unmask goutnakeff interrupt which was masked -+ * during handle nak out interrupt */ -+ gintmsk.b.goutnakeff = 1; -+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, -+ 0, gintmsk.d32); -+ -+ complete_ep(ep); -+ } -+ } -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) -+ { -+ dctl_data_t dctl; -+ gintmsk_data_t intr_mask = {.d32 = 0}; -+ dwc_otg_pcd_request_t *req = 0; -+ -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ dev_global_regs->dctl); -+ dctl.b.cgoutnak = 1; -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ -+ intr_mask.d32 = 0; -+ intr_mask.b.incomplisoout = 1; -+ -+ /* Get any pending requests */ -+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) { -+ req = DWC_CIRCLEQ_FIRST(&ep->queue); -+ if (!req) { -+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep); -+ } else { -+ dwc_otg_request_done(ep, req, 0); -+ start_next_request(ep); -+ } -+ } else { -+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep); -+ } -+ } -+ } -+ /* AHB Error */ -+ if (doepint.b.ahberr) { -+ DWC_ERROR("EP%d OUT AHB Error\n", epnum); -+ DWC_ERROR("EP%d DEPDMA=0x%08x \n", -+ epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma); -+ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr); -+ } -+ /* Setup Phase Done (contorl EPs) */ -+ if (doepint.b.setup) { -+#ifdef DEBUG_EP0 -+ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum); -+#endif -+ CLEAR_OUT_EP_INTR(core_if, epnum, setup); -+ -+ handle_ep0(pcd); -+ } -+ -+ /** OUT EP BNA Intr */ -+ if (doepint.b.bna) { -+ CLEAR_OUT_EP_INTR(core_if, epnum, bna); -+ if (core_if->dma_desc_enable) { -+#ifdef DWC_EN_ISOC -+ if (dwc_ep->type == -+ DWC_OTG_EP_TYPE_ISOC) { -+ /* -+ * This checking is performed to prevent first "false" BNA -+ * handling occuring right after reconnect -+ */ -+ if (dwc_ep->next_frame != -+ 0xffffffff) -+ dwc_otg_pcd_handle_iso_bna(ep); -+ } else -+#endif /* DWC_EN_ISOC */ -+ { -+ dwc_otg_pcd_handle_noniso_bna(ep); -+ } -+ } -+ } -+ /* Babble Interrupt */ -+ if (doepint.b.babble) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n", -+ epnum); -+ handle_out_ep_babble_intr(pcd, epnum); -+ -+ CLEAR_OUT_EP_INTR(core_if, epnum, babble); -+ } -+ if (doepint.b.outtknepdis) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \ -+ disabled\n",epnum); -+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ doepmsk_data_t doepmsk = {.d32 = 0}; -+ ep->dwc_ep.frame_num = core_if->frame_num; -+ if (ep->dwc_ep.bInterval > 1) { -+ depctl_data_t depctl; -+ depctl.d32 = DWC_READ_REG32(&core_if->dev_if-> -+ out_ep_regs[epnum]->doepctl); -+ if (ep->dwc_ep.frame_num & 0x1) { -+ depctl.b.setd1pid = 1; -+ depctl.b.setd0pid = 0; -+ } else { -+ depctl.b.setd0pid = 1; -+ depctl.b.setd1pid = 0; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if-> -+ out_ep_regs[epnum]->doepctl, depctl.d32); -+ } -+ start_next_request(ep); -+ doepmsk.b.outtknepdis = 1; -+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk, -+ doepmsk.d32, 0); -+ } -+ CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis); -+ } -+ -+ /* NAK Interrutp */ -+ if (doepint.b.nak) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum); -+ handle_out_ep_nak_intr(pcd, epnum); -+ -+ CLEAR_OUT_EP_INTR(core_if, epnum, nak); -+ } -+ /* NYET Interrutp */ -+ if (doepint.b.nyet) { -+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum); -+ handle_out_ep_nyet_intr(pcd, epnum); -+ -+ CLEAR_OUT_EP_INTR(core_if, epnum, nyet); -+ } -+ } -+ -+ epnum++; -+ ep_intr >>= 1; -+ } -+ -+ return 1; -+ -+#undef CLEAR_OUT_EP_INTR -+} -+static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun) -+{ -+ int retval = 0; -+ if(!frm_overrun && curr_fr >= trgt_fr) -+ retval = 1; -+ else if (frm_overrun -+ && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2))) -+ retval = 1; -+ return retval; -+} -+/** -+ * Incomplete ISO IN Transfer Interrupt. -+ * This interrupt indicates one of the following conditions occurred -+ * while transmitting an ISOC transaction. -+ * - Corrupted IN Token for ISOC EP. -+ * - Packet not complete in FIFO. -+ * The follow actions will be taken: -+ * -# Determine the EP -+ * -# Set incomplete flag in dwc_ep structure -+ * -# Disable EP; when "Endpoint Disabled" interrupt is received -+ * Flush FIFO -+ */ -+int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd) -+{ -+ gintsts_data_t gintsts; -+ -+#ifdef DWC_EN_ISOC -+ dwc_otg_dev_if_t *dev_if; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dsts_data_t dsts = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep; -+ int i; -+ -+ dev_if = GET_CORE_IF(pcd)->dev_if; -+ -+ for (i = 1; i <= dev_if->num_in_eps; ++i) { -+ dwc_ep = &pcd->in_ep[i].dwc_ep; -+ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz); -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ -+ if (depctl.b.epdis && deptsiz.d32) { -+ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr0; -+ } -+ -+ } -+ -+ dsts.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ dev_global_regs->dsts); -+ dwc_ep->next_frame = dsts.b.soffn; -+ -+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF -+ (pcd), -+ dwc_ep); -+ } -+ } -+ } -+ -+#else -+ depctl_data_t depctl = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep; -+ dwc_otg_dev_if_t *dev_if; -+ int i; -+ dev_if = GET_CORE_IF(pcd)->dev_if; -+ -+ DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n"); -+ -+ for (i = 1; i <= dev_if->num_in_eps; ++i) { -+ dwc_ep = &pcd->in_ep[i-1].dwc_ep; -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { -+ if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num, -+ dwc_ep->frm_overrun)) -+ { -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ depctl.b.snak = 1; -+ depctl.b.epdis = 1; -+ DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32); -+ } -+ } -+ } -+ -+ /*intr_mask.b.incomplisoin = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); */ -+#endif //DWC_EN_ISOC -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.incomplisoin = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * Incomplete ISO OUT Transfer Interrupt. -+ * -+ * This interrupt indicates that the core has dropped an ISO OUT -+ * packet. The following conditions can be the cause: -+ * - FIFO Full, the entire packet would not fit in the FIFO. -+ * - CRC Error -+ * - Corrupted Token -+ * The follow actions will be taken: -+ * -# Determine the EP -+ * -# Set incomplete flag in dwc_ep structure -+ * -# Read any data from the FIFO -+ * -# Disable EP. When "Endpoint Disabled" interrupt is received -+ * re-enable EP. -+ */ -+int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd) -+{ -+ -+ gintsts_data_t gintsts; -+ -+#ifdef DWC_EN_ISOC -+ dwc_otg_dev_if_t *dev_if; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dsts_data_t dsts = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep; -+ int i; -+ -+ dev_if = GET_CORE_IF(pcd)->dev_if; -+ -+ for (i = 1; i <= dev_if->num_out_eps; ++i) { -+ dwc_ep = &pcd->in_ep[i].dwc_ep; -+ if (pcd->out_ep[i].dwc_ep.active && -+ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { -+ deptsiz.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz); -+ depctl.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); -+ -+ if (depctl.b.epdis && deptsiz.d32) { -+ set_current_pkt_info(GET_CORE_IF(pcd), -+ &pcd->out_ep[i].dwc_ep); -+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { -+ dwc_ep->cur_pkt = 0; -+ dwc_ep->proc_buf_num = -+ (dwc_ep->proc_buf_num ^ 1) & 0x1; -+ -+ if (dwc_ep->proc_buf_num) { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff1; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr1; -+ } else { -+ dwc_ep->cur_pkt_addr = -+ dwc_ep->xfer_buff0; -+ dwc_ep->cur_pkt_dma_addr = -+ dwc_ep->dma_addr0; -+ } -+ -+ } -+ -+ dsts.d32 = -+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if-> -+ dev_global_regs->dsts); -+ dwc_ep->next_frame = dsts.b.soffn; -+ -+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF -+ (pcd), -+ dwc_ep); -+ } -+ } -+ } -+#else -+ /** @todo implement ISR */ -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ dwc_otg_core_if_t *core_if; -+ deptsiz_data_t deptsiz = {.d32 = 0 }; -+ depctl_data_t depctl = {.d32 = 0 }; -+ dctl_data_t dctl = {.d32 = 0 }; -+ dwc_ep_t *dwc_ep = NULL; -+ int i; -+ core_if = GET_CORE_IF(pcd); -+ -+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) { -+ dwc_ep = &pcd->out_ep[i].dwc_ep; -+ depctl.d32 = -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); -+ if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) { -+ core_if->dev_if->isoc_ep = dwc_ep; -+ deptsiz.d32 = -+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); -+ break; -+ } -+ } -+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl); -+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts); -+ intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk); -+ -+ if (!intr_mask.b.goutnakeff) { -+ /* Unmask it */ -+ intr_mask.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32); -+ } -+ if (!gintsts.b.goutnakeff) { -+ dctl.b.sgoutnak = 1; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); -+ -+ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl); -+ if (depctl.b.epena) { -+ depctl.b.epdis = 1; -+ depctl.b.snak = 1; -+ } -+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32); -+ -+ intr_mask.d32 = 0; -+ intr_mask.b.incomplisoout = 1; -+ -+#endif /* DWC_EN_ISOC */ -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.incomplisoout = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * This function handles the Global IN NAK Effective interrupt. -+ * -+ */ -+int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ depctl_data_t diepctl = {.d32 = 0 }; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+ int i; -+ -+ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); -+ -+ /* Disable all active IN EPs */ -+ for (i = 0; i <= dev_if->num_in_eps; i++) { -+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl); -+ if (!(diepctl.b.eptype & 1) && diepctl.b.epena) { -+ if (core_if->start_predict > 0) -+ core_if->start_predict++; -+ diepctl.b.epdis = 1; -+ diepctl.b.snak = 1; -+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32); -+ } -+ } -+ -+ -+ /* Disable the Global IN NAK Effective Interrupt */ -+ intr_mask.b.ginnakeff = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.ginnakeff = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * OUT NAK Effective. -+ * -+ */ -+int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; -+ gintmsk_data_t intr_mask = {.d32 = 0 }; -+ gintsts_data_t gintsts; -+ depctl_data_t doepctl; -+ int i; -+ -+ /* Disable the Global OUT NAK Effective Interrupt */ -+ intr_mask.b.goutnakeff = 1; -+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, -+ intr_mask.d32, 0); -+ -+ /* If DEV OUT NAK enabled*/ -+ if (pcd->core_if->core_params->dev_out_nak) { -+ /* Run over all out endpoints to determine the ep number on -+ * which the timeout has happened -+ */ -+ for (i = 0; i <= dev_if->num_out_eps; i++) { -+ if ( pcd->core_if->ep_xfer_info[i].state == 2 ) -+ break; -+ } -+ if (i > dev_if->num_out_eps) { -+ dctl_data_t dctl; -+ dctl.d32 = -+ DWC_READ_REG32(&dev_if->dev_global_regs->dctl); -+ dctl.b.cgoutnak = 1; -+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, -+ dctl.d32); -+ goto out; -+ } -+ -+ /* Disable the endpoint */ -+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl); -+ if (doepctl.b.epena) { -+ doepctl.b.epdis = 1; -+ doepctl.b.snak = 1; -+ } -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32); -+ return 1; -+ } -+ /* We come here from Incomplete ISO OUT handler */ -+ if (dev_if->isoc_ep) { -+ dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep; -+ uint32_t epnum = dwc_ep->num; -+ doepint_data_t doepint; -+ doepint.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint); -+ dev_if->isoc_ep = NULL; -+ doepctl.d32 = -+ DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl); -+ DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32); -+ if (doepctl.b.epena) { -+ doepctl.b.epdis = 1; -+ doepctl.b.snak = 1; -+ } -+ DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl, -+ doepctl.d32); -+ return 1; -+ } else -+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", -+ "Global OUT NAK Effective\n"); -+ -+out: -+ /* Clear interrupt */ -+ gintsts.d32 = 0; -+ gintsts.b.goutnakeff = 1; -+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, -+ gintsts.d32); -+ -+ return 1; -+} -+ -+/** -+ * PCD interrupt handler. -+ * -+ * The PCD handles the device interrupts. Many conditions can cause a -+ * device interrupt. When an interrupt occurs, the device interrupt -+ * service routine determines the cause of the interrupt and -+ * dispatches handling to the appropriate function. These interrupt -+ * handling functions are described below. -+ * -+ * All interrupt registers are processed from LSB to MSB. -+ * -+ */ -+int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd) -+{ -+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); -+#ifdef VERBOSE -+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; -+#endif -+ gintsts_data_t gintr_status; -+ int32_t retval = 0; -+ -+ /* Exit from ISR if core is hibernated */ -+ if (core_if->hibernation_suspend == 1) { -+ return retval; -+ } -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", -+ __func__, -+ DWC_READ_REG32(&global_regs->gintsts), -+ DWC_READ_REG32(&global_regs->gintmsk)); -+#endif -+ -+ if (dwc_otg_is_device_mode(core_if)) { -+ DWC_SPINLOCK(pcd->lock); -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", -+ __func__, -+ DWC_READ_REG32(&global_regs->gintsts), -+ DWC_READ_REG32(&global_regs->gintmsk)); -+#endif -+ -+ gintr_status.d32 = dwc_otg_read_core_intr(core_if); -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", -+ __func__, gintr_status.d32); -+ -+ if (gintr_status.b.sofintr) { -+ retval |= dwc_otg_pcd_handle_sof_intr(pcd); -+ } -+ if (gintr_status.b.rxstsqlvl) { -+ retval |= -+ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); -+ } -+ if (gintr_status.b.nptxfempty) { -+ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); -+ } -+ if (gintr_status.b.goutnakeff) { -+ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); -+ } -+ if (gintr_status.b.i2cintr) { -+ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); -+ } -+ if (gintr_status.b.erlysuspend) { -+ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); -+ } -+ if (gintr_status.b.usbreset) { -+ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); -+ } -+ if (gintr_status.b.enumdone) { -+ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); -+ } -+ if (gintr_status.b.isooutdrop) { -+ retval |= -+ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr -+ (pcd); -+ } -+ if (gintr_status.b.eopframe) { -+ retval |= -+ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); -+ } -+ if (gintr_status.b.inepint) { -+ if (!core_if->multiproc_int_enable) { -+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); -+ } -+ } -+ if (gintr_status.b.outepintr) { -+ if (!core_if->multiproc_int_enable) { -+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); -+ } -+ } -+ if (gintr_status.b.epmismatch) { -+ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd); -+ } -+ if (gintr_status.b.fetsusp) { -+ retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd); -+ } -+ if (gintr_status.b.ginnakeff) { -+ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); -+ } -+ if (gintr_status.b.incomplisoin) { -+ retval |= -+ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); -+ } -+ if (gintr_status.b.incomplisoout) { -+ retval |= -+ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); -+ } -+ -+ /* In MPI mode Device Endpoints interrupts are asserted -+ * without setting outepintr and inepint bits set, so these -+ * Interrupt handlers are called without checking these bit-fields -+ */ -+ if (core_if->multiproc_int_enable) { -+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); -+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); -+ } -+#ifdef VERBOSE -+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, -+ DWC_READ_REG32(&global_regs->gintsts)); -+#endif -+ DWC_SPINUNLOCK(pcd->lock); -+ } -+ return retval; -+} -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c -@@ -0,0 +1,1280 @@ -+ /* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $ -+ * $Revision: #21 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+#ifndef DWC_HOST_ONLY -+ -+/** @file -+ * This file implements the Peripheral Controller Driver. -+ * -+ * The Peripheral Controller Driver (PCD) is responsible for -+ * translating requests from the Function Driver into the appropriate -+ * actions on the DWC_otg controller. It isolates the Function Driver -+ * from the specifics of the controller by providing an API to the -+ * Function Driver. -+ * -+ * The Peripheral Controller Driver for Linux will implement the -+ * Gadget API, so that the existing Gadget drivers can be used. -+ * (Gadget Driver is the Linux terminology for a Function Driver.) -+ * -+ * The Linux Gadget API is defined in the header file -+ * <code><linux/usb_gadget.h></code>. The USB EP operations API is -+ * defined in the structure <code>usb_ep_ops</code> and the USB -+ * Controller API is defined in the structure -+ * <code>usb_gadget_ops</code>. -+ * -+ */ -+ -+#include "dwc_otg_os_dep.h" -+#include "dwc_otg_pcd_if.h" -+#include "dwc_otg_pcd.h" -+#include "dwc_otg_driver.h" -+#include "dwc_otg_dbg.h" -+ -+extern bool fiq_enable; -+ -+static struct gadget_wrapper { -+ dwc_otg_pcd_t *pcd; -+ -+ struct usb_gadget gadget; -+ struct usb_gadget_driver *driver; -+ -+ struct usb_ep ep0; -+ struct usb_ep in_ep[16]; -+ struct usb_ep out_ep[16]; -+ -+} *gadget_wrapper; -+ -+/* Display the contents of the buffer */ -+extern void dump_msg(const u8 * buf, unsigned int length); -+/** -+ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case -+ * if the endpoint is not found -+ */ -+static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle) -+{ -+ int i; -+ if (pcd->ep0.priv == handle) { -+ return &pcd->ep0; -+ } -+ -+ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) { -+ if (pcd->in_ep[i].priv == handle) -+ return &pcd->in_ep[i]; -+ if (pcd->out_ep[i].priv == handle) -+ return &pcd->out_ep[i]; -+ } -+ -+ return NULL; -+} -+ -+/* USB Endpoint Operations */ -+/* -+ * The following sections briefly describe the behavior of the Gadget -+ * API endpoint operations implemented in the DWC_otg driver -+ * software. Detailed descriptions of the generic behavior of each of -+ * these functions can be found in the Linux header file -+ * include/linux/usb_gadget.h. -+ * -+ * The Gadget API provides wrapper functions for each of the function -+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper -+ * function, which then calls the underlying PCD function. The -+ * following sections are named according to the wrapper -+ * functions. Within each section, the corresponding DWC_otg PCD -+ * function name is specified. -+ * -+ */ -+ -+/** -+ * This function is called by the Gadget Driver for each EP to be -+ * configured for the current configuration (SET_CONFIGURATION). -+ * -+ * This function initializes the dwc_otg_ep_t data structure, and then -+ * calls dwc_otg_ep_activate. -+ */ -+static int ep_enable(struct usb_ep *usb_ep, -+ const struct usb_endpoint_descriptor *ep_desc) -+{ -+ int retval; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc); -+ -+ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) { -+ DWC_WARN("%s, bad ep or descriptor\n", __func__); -+ return -EINVAL; -+ } -+ if (usb_ep == &gadget_wrapper->ep0) { -+ DWC_WARN("%s, bad ep(0)\n", __func__); -+ return -EINVAL; -+ } -+ -+ /* Check FIFO size? */ -+ if (!ep_desc->wMaxPacketSize) { -+ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); -+ return -ERANGE; -+ } -+ -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_WARN("%s, bogus device state\n", __func__); -+ return -ESHUTDOWN; -+ } -+ -+ /* Delete after check - MAS */ -+#if 0 -+ nat = (uint32_t) ep_desc->wMaxPacketSize; -+ printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat); -+ nat = (nat >> 11) & 0x03; -+ printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat); -+#endif -+ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd, -+ (const uint8_t *)ep_desc, -+ (void *)usb_ep); -+ if (retval) { -+ DWC_WARN("dwc_otg_pcd_ep_enable failed\n"); -+ return -EINVAL; -+ } -+ -+ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize); -+ -+ return 0; -+} -+ -+/** -+ * This function is called when an EP is disabled due to disconnect or -+ * change in configuration. Any pending requests will terminate with a -+ * status of -ESHUTDOWN. -+ * -+ * This function modifies the dwc_otg_ep_t data structure for this EP, -+ * and then calls dwc_otg_ep_deactivate. -+ */ -+static int ep_disable(struct usb_ep *usb_ep) -+{ -+ int retval; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep); -+ if (!usb_ep) { -+ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, -+ usb_ep ? usb_ep->name : NULL); -+ return -EINVAL; -+ } -+ -+ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep); -+ if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function allocates a request object to use with the specified -+ * endpoint. -+ * -+ * @param ep The endpoint to be used with with the request -+ * @param gfp_flags the GFP_* flags to use. -+ */ -+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, -+ gfp_t gfp_flags) -+{ -+ struct usb_request *usb_req; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags); -+ if (0 == ep) { -+ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); -+ return 0; -+ } -+ usb_req = kzalloc(sizeof(*usb_req), gfp_flags); -+ if (0 == usb_req) { -+ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n"); -+ return 0; -+ } -+ usb_req->dma = DWC_DMA_ADDR_INVALID; -+ -+ return usb_req; -+} -+ -+/** -+ * This function frees a request object. -+ * -+ * @param ep The endpoint associated with the request -+ * @param req The request being freed -+ */ -+static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req) -+{ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req); -+ -+ if (0 == ep || 0 == req) { -+ DWC_WARN("%s() %s\n", __func__, -+ "Invalid ep or req argument!\n"); -+ return; -+ } -+ -+ kfree(req); -+} -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+/** -+ * This function allocates an I/O buffer to be used for a transfer -+ * to/from the specified endpoint. -+ * -+ * @param usb_ep The endpoint to be used with with the request -+ * @param bytes The desired number of bytes for the buffer -+ * @param dma Pointer to the buffer's DMA address; must be valid -+ * @param gfp_flags the GFP_* flags to use. -+ * @return address of a new buffer or null is buffer could not be allocated. -+ */ -+static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, -+ dma_addr_t * dma, gfp_t gfp_flags) -+{ -+ void *buf; -+ dwc_otg_pcd_t *pcd = 0; -+ -+ pcd = gadget_wrapper->pcd; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, -+ dma, gfp_flags); -+ -+ /* Check dword alignment */ -+ if ((bytes & 0x3UL) != 0) { -+ DWC_WARN("%s() Buffer size is not a multiple of" -+ "DWORD size (%d)", __func__, bytes); -+ } -+ -+ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags); -+ WARN_ON(!buf); -+ -+ /* Check dword alignment */ -+ if (((int)buf & 0x3UL) != 0) { -+ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", -+ __func__, buf); -+ } -+ -+ return buf; -+} -+ -+/** -+ * This function frees an I/O buffer that was allocated by alloc_buffer. -+ * -+ * @param usb_ep the endpoint associated with the buffer -+ * @param buf address of the buffer -+ * @param dma The buffer's DMA address -+ * @param bytes The number of bytes of the buffer -+ */ -+static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, -+ dma_addr_t dma, unsigned bytes) -+{ -+ dwc_otg_pcd_t *pcd = 0; -+ -+ pcd = gadget_wrapper->pcd; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes); -+ -+ dma_free_coherent(NULL, bytes, buf, dma); -+} -+#endif -+ -+/** -+ * This function is used to submit an I/O Request to an EP. -+ * -+ * - When the request completes the request's completion callback -+ * is called to return the request to the driver. -+ * - An EP, except control EPs, may have multiple requests -+ * pending. -+ * - Once submitted the request cannot be examined or modified. -+ * - Each request is turned into one or more packets. -+ * - A BULK EP can queue any amount of data; the transfer is -+ * packetized. -+ * - Zero length Packets are specified with the request 'zero' -+ * flag. -+ */ -+static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req, -+ gfp_t gfp_flags) -+{ -+ dwc_otg_pcd_t *pcd; -+ struct dwc_otg_pcd_ep *ep = NULL; -+ int retval = 0, is_isoc_ep = 0; -+ dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n", -+ __func__, usb_ep, usb_req, gfp_flags); -+ -+ if (!usb_req || !usb_req->complete || !usb_req->buf) { -+ DWC_WARN("bad params\n"); -+ return -EINVAL; -+ } -+ -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ return -EINVAL; -+ } -+ -+ pcd = gadget_wrapper->pcd; -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", -+ gadget_wrapper->gadget.speed); -+ DWC_WARN("bogus device state\n"); -+ return -ESHUTDOWN; -+ } -+ -+ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", -+ usb_ep->name, usb_req, usb_req->length, usb_req->buf); -+ -+ usb_req->status = -EINPROGRESS; -+ usb_req->actual = 0; -+ -+ ep = ep_from_handle(pcd, usb_ep); -+ if (ep == NULL) -+ is_isoc_ep = 0; -+ else -+ is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0; -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ dma_addr = usb_req->dma; -+#else -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; -+ struct device *dev = NULL; -+ -+ if (otg_dev != NULL) -+ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); -+ -+ if (usb_req->length != 0 && -+ usb_req->dma == DWC_DMA_ADDR_INVALID) { -+ dma_addr = dma_map_single(dev, usb_req->buf, -+ usb_req->length, -+ ep->dwc_ep.is_in ? -+ DMA_TO_DEVICE: -+ DMA_FROM_DEVICE); -+ } -+ } -+#endif -+ -+#ifdef DWC_UTE_PER_IO -+ if (is_isoc_ep == 1) { -+ retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, -+ usb_req->length, usb_req->zero, usb_req, -+ gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req); -+ if (retval) -+ return -EINVAL; -+ -+ return 0; -+ } -+#endif -+ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr, -+ usb_req->length, usb_req->zero, usb_req, -+ gfp_flags == GFP_ATOMIC ? 1 : 0); -+ if (retval) { -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/** -+ * This function cancels an I/O request from an EP. -+ */ -+static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req) -+{ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req); -+ -+ if (!usb_ep || !usb_req) { -+ DWC_WARN("bad argument\n"); -+ return -EINVAL; -+ } -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_WARN("bogus device state\n"); -+ return -ESHUTDOWN; -+ } -+ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) { -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/** -+ * usb_ep_set_halt stalls an endpoint. -+ * -+ * usb_ep_clear_halt clears an endpoint halt and resets its data -+ * toggle. -+ * -+ * Both of these functions are implemented with the same underlying -+ * function. The behavior depends on the value argument. -+ * -+ * @param[in] usb_ep the Endpoint to halt or clear halt. -+ * @param[in] value -+ * - 0 means clear_halt. -+ * - 1 means set_halt, -+ * - 2 means clear stall lock flag. -+ * - 3 means set stall lock flag. -+ */ -+static int ep_halt(struct usb_ep *usb_ep, int value) -+{ -+ int retval = 0; -+ -+ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value); -+ -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ return -EINVAL; -+ } -+ -+ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value); -+ if (retval == -DWC_E_AGAIN) { -+ return -EAGAIN; -+ } else if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+ -+//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)) -+#if 0 -+/** -+ * ep_wedge: sets the halt feature and ignores clear requests -+ * -+ * @usb_ep: the endpoint being wedged -+ * -+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) -+ * requests. If the gadget driver clears the halt status, it will -+ * automatically unwedge the endpoint. -+ * -+ * Returns zero on success, else negative errno. * -+ * Check usb_ep_set_wedge() at "usb_gadget.h" for details -+ */ -+static int ep_wedge(struct usb_ep *usb_ep) -+{ -+ int retval = 0; -+ -+ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name); -+ -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ return -EINVAL; -+ } -+ -+ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep); -+ if (retval == -DWC_E_AGAIN) { -+ retval = -EAGAIN; -+ } else if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+#endif -+ -+#ifdef DWC_EN_ISOC -+/** -+ * This function is used to submit an ISOC Transfer Request to an EP. -+ * -+ * - Every time a sync period completes the request's completion callback -+ * is called to provide data to the gadget driver. -+ * - Once submitted the request cannot be modified. -+ * - Each request is turned into periodic data packets untill ISO -+ * Transfer is stopped.. -+ */ -+static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, -+ gfp_t gfp_flags) -+{ -+ int retval = 0; -+ -+ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { -+ DWC_WARN("bad params\n"); -+ return -EINVAL; -+ } -+ -+ if (!usb_ep) { -+ DWC_PRINTF("bad params\n"); -+ return -EINVAL; -+ } -+ -+ req->status = -EINPROGRESS; -+ -+ retval = -+ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0, -+ req->buf1, req->dma0, req->dma1, -+ req->sync_frame, req->data_pattern_frame, -+ req->data_per_frame, -+ req-> -+ flags & USB_REQ_ISO_ASAP ? -1 : -+ req->start_frame, req->buf_proc_intrvl, -+ req, gfp_flags == GFP_ATOMIC ? 1 : 0); -+ -+ if (retval) { -+ return -EINVAL; -+ } -+ -+ return retval; -+} -+ -+/** -+ * This function stops ISO EP Periodic Data Transfer. -+ */ -+static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) -+{ -+ int retval = 0; -+ if (!usb_ep) { -+ DWC_WARN("bad ep\n"); -+ } -+ -+ if (!gadget_wrapper->driver || -+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) { -+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", -+ gadget_wrapper->gadget.speed); -+ DWC_WARN("bogus device state\n"); -+ } -+ -+ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req); -+ if (retval) { -+ retval = -EINVAL; -+ } -+ -+ return retval; -+} -+ -+static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep, -+ int packets, gfp_t gfp_flags) -+{ -+ struct usb_iso_request *pReq = NULL; -+ uint32_t req_size; -+ -+ req_size = sizeof(struct usb_iso_request); -+ req_size += -+ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); -+ -+ pReq = kmalloc(req_size, gfp_flags); -+ if (!pReq) { -+ DWC_WARN("Can't allocate Iso Request\n"); -+ return 0; -+ } -+ pReq->iso_packet_desc0 = (void *)(pReq + 1); -+ -+ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; -+ -+ return pReq; -+} -+ -+static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) -+{ -+ kfree(req); -+} -+ -+static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = { -+ .ep_ops = { -+ .enable = ep_enable, -+ .disable = ep_disable, -+ -+ .alloc_request = dwc_otg_pcd_alloc_request, -+ .free_request = dwc_otg_pcd_free_request, -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ .alloc_buffer = dwc_otg_pcd_alloc_buffer, -+ .free_buffer = dwc_otg_pcd_free_buffer, -+#endif -+ -+ .queue = ep_queue, -+ .dequeue = ep_dequeue, -+ -+ .set_halt = ep_halt, -+ .fifo_status = 0, -+ .fifo_flush = 0, -+ }, -+ .iso_ep_start = iso_ep_start, -+ .iso_ep_stop = iso_ep_stop, -+ .alloc_iso_request = alloc_iso_request, -+ .free_iso_request = free_iso_request, -+}; -+ -+#else -+ -+ int (*enable) (struct usb_ep *ep, -+ const struct usb_endpoint_descriptor *desc); -+ int (*disable) (struct usb_ep *ep); -+ -+ struct usb_request *(*alloc_request) (struct usb_ep *ep, -+ gfp_t gfp_flags); -+ void (*free_request) (struct usb_ep *ep, struct usb_request *req); -+ -+ int (*queue) (struct usb_ep *ep, struct usb_request *req, -+ gfp_t gfp_flags); -+ int (*dequeue) (struct usb_ep *ep, struct usb_request *req); -+ -+ int (*set_halt) (struct usb_ep *ep, int value); -+ int (*set_wedge) (struct usb_ep *ep); -+ -+ int (*fifo_status) (struct usb_ep *ep); -+ void (*fifo_flush) (struct usb_ep *ep); -+static struct usb_ep_ops dwc_otg_pcd_ep_ops = { -+ .enable = ep_enable, -+ .disable = ep_disable, -+ -+ .alloc_request = dwc_otg_pcd_alloc_request, -+ .free_request = dwc_otg_pcd_free_request, -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) -+ .alloc_buffer = dwc_otg_pcd_alloc_buffer, -+ .free_buffer = dwc_otg_pcd_free_buffer, -+#else -+ /* .set_wedge = ep_wedge, */ -+ .set_wedge = NULL, /* uses set_halt instead */ -+#endif -+ -+ .queue = ep_queue, -+ .dequeue = ep_dequeue, -+ -+ .set_halt = ep_halt, -+ .fifo_status = 0, -+ .fifo_flush = 0, -+ -+}; -+ -+#endif /* _EN_ISOC_ */ -+/* Gadget Operations */ -+/** -+ * The following gadget operations will be implemented in the DWC_otg -+ * PCD. Functions in the API that are not described below are not -+ * implemented. -+ * -+ * The Gadget API provides wrapper functions for each of the function -+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the -+ * wrapper function, which then calls the underlying PCD function. The -+ * following sections are named according to the wrapper functions -+ * (except for ioctl, which doesn't have a wrapper function). Within -+ * each section, the corresponding DWC_otg PCD function name is -+ * specified. -+ * -+ */ -+ -+/** -+ *Gets the USB Frame number of the last SOF. -+ */ -+static int get_frame_number(struct usb_gadget *gadget) -+{ -+ struct gadget_wrapper *d; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); -+ -+ if (gadget == 0) { -+ return -ENODEV; -+ } -+ -+ d = container_of(gadget, struct gadget_wrapper, gadget); -+ return dwc_otg_pcd_get_frame_number(d->pcd); -+} -+ -+#ifdef CONFIG_USB_DWC_OTG_LPM -+static int test_lpm_enabled(struct usb_gadget *gadget) -+{ -+ struct gadget_wrapper *d; -+ -+ d = container_of(gadget, struct gadget_wrapper, gadget); -+ -+ return dwc_otg_pcd_is_lpm_enabled(d->pcd); -+} -+#endif -+ -+/** -+ * Initiates Session Request Protocol (SRP) to wakeup the host if no -+ * session is in progress. If a session is already in progress, but -+ * the device is suspended, remote wakeup signaling is started. -+ * -+ */ -+static int wakeup(struct usb_gadget *gadget) -+{ -+ struct gadget_wrapper *d; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget); -+ -+ if (gadget == 0) { -+ return -ENODEV; -+ } else { -+ d = container_of(gadget, struct gadget_wrapper, gadget); -+ } -+ dwc_otg_pcd_wakeup(d->pcd); -+ return 0; -+} -+ -+static const struct usb_gadget_ops dwc_otg_pcd_ops = { -+ .get_frame = get_frame_number, -+ .wakeup = wakeup, -+#ifdef CONFIG_USB_DWC_OTG_LPM -+ .lpm_support = test_lpm_enabled, -+#endif -+ // current versions must always be self-powered -+}; -+ -+static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes) -+{ -+ int retval = -DWC_E_NOT_SUPPORTED; -+ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) { -+ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget, -+ (struct usb_ctrlrequest -+ *)bytes); -+ } -+ -+ if (retval == -ENOTSUPP) { -+ retval = -DWC_E_NOT_SUPPORTED; -+ } else if (retval < 0) { -+ retval = -DWC_E_INVALID; -+ } -+ -+ return retval; -+} -+ -+#ifdef DWC_EN_ISOC -+static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int proc_buf_num) -+{ -+ int i, packet_count; -+ struct usb_gadget_iso_packet_descriptor *iso_packet = 0; -+ struct usb_iso_request *iso_req = req_handle; -+ -+ if (proc_buf_num) { -+ iso_packet = iso_req->iso_packet_desc1; -+ } else { -+ iso_packet = iso_req->iso_packet_desc0; -+ } -+ packet_count = -+ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle); -+ for (i = 0; i < packet_count; ++i) { -+ int status; -+ int actual; -+ int offset; -+ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle, -+ i, &status, &actual, &offset); -+ switch (status) { -+ case -DWC_E_NO_DATA: -+ status = -ENODATA; -+ break; -+ default: -+ if (status) { -+ DWC_PRINTF("unknown status in isoc packet\n"); -+ } -+ -+ } -+ iso_packet[i].status = status; -+ iso_packet[i].offset = offset; -+ iso_packet[i].actual_length = actual; -+ } -+ -+ iso_req->status = 0; -+ iso_req->process_buffer(ep_handle, iso_req); -+ -+ return 0; -+} -+#endif /* DWC_EN_ISOC */ -+ -+#ifdef DWC_UTE_PER_IO -+/** -+ * Copy the contents of the extended request to the Linux usb_request's -+ * extended part and call the gadget's completion. -+ * -+ * @param pcd Pointer to the pcd structure -+ * @param ep_handle Void pointer to the usb_ep structure -+ * @param req_handle Void pointer to the usb_request structure -+ * @param status Request status returned from the portable logic -+ * @param ereq_port Void pointer to the extended request structure -+ * created in the the portable part that contains the -+ * results of the processed iso packets. -+ */ -+static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, void *ereq_port) -+{ -+ struct dwc_ute_iso_req_ext *ereqorg = NULL; -+ struct dwc_iso_xreq_port *ereqport = NULL; -+ struct dwc_ute_iso_packet_descriptor *desc_org = NULL; -+ int i; -+ struct usb_request *req; -+ //struct dwc_ute_iso_packet_descriptor * -+ //int status = 0; -+ -+ req = (struct usb_request *)req_handle; -+ ereqorg = &req->ext_req; -+ ereqport = (struct dwc_iso_xreq_port *)ereq_port; -+ desc_org = ereqorg->per_io_frame_descs; -+ -+ if (req && req->complete) { -+ /* Copy the request data from the portable logic to our request */ -+ for (i = 0; i < ereqport->pio_pkt_count; i++) { -+ desc_org[i].actual_length = -+ ereqport->per_io_frame_descs[i].actual_length; -+ desc_org[i].status = -+ ereqport->per_io_frame_descs[i].status; -+ } -+ -+ switch (status) { -+ case -DWC_E_SHUTDOWN: -+ req->status = -ESHUTDOWN; -+ break; -+ case -DWC_E_RESTART: -+ req->status = -ECONNRESET; -+ break; -+ case -DWC_E_INVALID: -+ req->status = -EINVAL; -+ break; -+ case -DWC_E_TIMEOUT: -+ req->status = -ETIMEDOUT; -+ break; -+ default: -+ req->status = status; -+ } -+ -+ /* And call the gadget's completion */ -+ req->complete(ep_handle, req); -+ } -+ -+ return 0; -+} -+#endif /* DWC_UTE_PER_IO */ -+ -+static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle, -+ void *req_handle, int32_t status, uint32_t actual) -+{ -+ struct usb_request *req = (struct usb_request *)req_handle; -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) -+ struct dwc_otg_pcd_ep *ep = NULL; -+#endif -+ -+ if (req && req->complete) { -+ switch (status) { -+ case -DWC_E_SHUTDOWN: -+ req->status = -ESHUTDOWN; -+ break; -+ case -DWC_E_RESTART: -+ req->status = -ECONNRESET; -+ break; -+ case -DWC_E_INVALID: -+ req->status = -EINVAL; -+ break; -+ case -DWC_E_TIMEOUT: -+ req->status = -ETIMEDOUT; -+ break; -+ default: -+ req->status = status; -+ -+ } -+ -+ req->actual = actual; -+ DWC_SPINUNLOCK(pcd->lock); -+ req->complete(ep_handle, req); -+ DWC_SPINLOCK(pcd->lock); -+ } -+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27) -+ ep = ep_from_handle(pcd, ep_handle); -+ if (GET_CORE_IF(pcd)->dma_enable) { -+ if (req->length != 0) { -+ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev; -+ struct device *dev = NULL; -+ -+ if (otg_dev != NULL) -+ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep); -+ -+ dma_unmap_single(dev, req->dma, req->length, -+ ep->dwc_ep.is_in ? -+ DMA_TO_DEVICE: DMA_FROM_DEVICE); -+ } -+ } -+#endif -+ -+ return 0; -+} -+ -+static int _connect(dwc_otg_pcd_t * pcd, int speed) -+{ -+ gadget_wrapper->gadget.speed = speed; -+ return 0; -+} -+ -+static int _disconnect(dwc_otg_pcd_t * pcd) -+{ -+ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) { -+ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget); -+ } -+ return 0; -+} -+ -+static int _resume(dwc_otg_pcd_t * pcd) -+{ -+ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) { -+ gadget_wrapper->driver->resume(&gadget_wrapper->gadget); -+ } -+ -+ return 0; -+} -+ -+static int _suspend(dwc_otg_pcd_t * pcd) -+{ -+ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) { -+ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget); -+ } -+ return 0; -+} -+ -+/** -+ * This function updates the otg values in the gadget structure. -+ */ -+static int _hnp_changed(dwc_otg_pcd_t * pcd) -+{ -+ -+ if (!gadget_wrapper->gadget.is_otg) -+ return 0; -+ -+ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd); -+ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd); -+ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd); -+ return 0; -+} -+ -+static int _reset(dwc_otg_pcd_t * pcd) -+{ -+ return 0; -+} -+ -+#ifdef DWC_UTE_CFI -+static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req) -+{ -+ int retval = -DWC_E_INVALID; -+ if (gadget_wrapper->driver->cfi_feature_setup) { -+ retval = -+ gadget_wrapper->driver-> -+ cfi_feature_setup(&gadget_wrapper->gadget, -+ (struct cfi_usb_ctrlrequest *)cfi_req); -+ } -+ -+ return retval; -+} -+#endif -+ -+static const struct dwc_otg_pcd_function_ops fops = { -+ .complete = _complete, -+#ifdef DWC_EN_ISOC -+ .isoc_complete = _isoc_complete, -+#endif -+ .setup = _setup, -+ .disconnect = _disconnect, -+ .connect = _connect, -+ .resume = _resume, -+ .suspend = _suspend, -+ .hnp_changed = _hnp_changed, -+ .reset = _reset, -+#ifdef DWC_UTE_CFI -+ .cfi_setup = _cfi_setup, -+#endif -+#ifdef DWC_UTE_PER_IO -+ .xisoc_complete = _xisoc_complete, -+#endif -+}; -+ -+/** -+ * This function is the top level PCD interrupt handler. -+ */ -+static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev) -+{ -+ dwc_otg_pcd_t *pcd = dev; -+ int32_t retval = IRQ_NONE; -+ -+ retval = dwc_otg_pcd_handle_intr(pcd); -+ if (retval != 0) { -+ S3C2410X_CLEAR_EINTPEND(); -+ } -+ return IRQ_RETVAL(retval); -+} -+ -+/** -+ * This function initialized the usb_ep structures to there default -+ * state. -+ * -+ * @param d Pointer on gadget_wrapper. -+ */ -+void gadget_add_eps(struct gadget_wrapper *d) -+{ -+ static const char *names[] = { -+ -+ "ep0", -+ "ep1in", -+ "ep2in", -+ "ep3in", -+ "ep4in", -+ "ep5in", -+ "ep6in", -+ "ep7in", -+ "ep8in", -+ "ep9in", -+ "ep10in", -+ "ep11in", -+ "ep12in", -+ "ep13in", -+ "ep14in", -+ "ep15in", -+ "ep1out", -+ "ep2out", -+ "ep3out", -+ "ep4out", -+ "ep5out", -+ "ep6out", -+ "ep7out", -+ "ep8out", -+ "ep9out", -+ "ep10out", -+ "ep11out", -+ "ep12out", -+ "ep13out", -+ "ep14out", -+ "ep15out" -+ }; -+ -+ int i; -+ struct usb_ep *ep; -+ int8_t dev_endpoints; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__); -+ -+ INIT_LIST_HEAD(&d->gadget.ep_list); -+ d->gadget.ep0 = &d->ep0; -+ d->gadget.speed = USB_SPEED_UNKNOWN; -+ -+ INIT_LIST_HEAD(&d->gadget.ep0->ep_list); -+ -+ /** -+ * Initialize the EP0 structure. -+ */ -+ ep = &d->ep0; -+ -+ /* Init the usb_ep structure. */ -+ ep->name = names[0]; -+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; -+ -+ /** -+ * @todo NGS: What should the max packet size be set to -+ * here? Before EP type is set? -+ */ -+ ep->maxpacket = MAX_PACKET_SIZE; -+ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep); -+ -+ list_add_tail(&ep->ep_list, &d->gadget.ep_list); -+ -+ /** -+ * Initialize the EP structures. -+ */ -+ dev_endpoints = d->pcd->core_if->dev_if->num_in_eps; -+ -+ for (i = 0; i < dev_endpoints; i++) { -+ ep = &d->in_ep[i]; -+ -+ /* Init the usb_ep structure. */ -+ ep->name = names[d->pcd->in_ep[i].dwc_ep.num]; -+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; -+ -+ /** -+ * @todo NGS: What should the max packet size be set to -+ * here? Before EP type is set? -+ */ -+ ep->maxpacket = MAX_PACKET_SIZE; -+ list_add_tail(&ep->ep_list, &d->gadget.ep_list); -+ } -+ -+ dev_endpoints = d->pcd->core_if->dev_if->num_out_eps; -+ -+ for (i = 0; i < dev_endpoints; i++) { -+ ep = &d->out_ep[i]; -+ -+ /* Init the usb_ep structure. */ -+ ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num]; -+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops; -+ -+ /** -+ * @todo NGS: What should the max packet size be set to -+ * here? Before EP type is set? -+ */ -+ ep->maxpacket = MAX_PACKET_SIZE; -+ -+ list_add_tail(&ep->ep_list, &d->gadget.ep_list); -+ } -+ -+ /* remove ep0 from the list. There is a ep0 pointer. */ -+ list_del_init(&d->ep0.ep_list); -+ -+ d->ep0.maxpacket = MAX_EP0_SIZE; -+} -+ -+/** -+ * This function releases the Gadget device. -+ * required by device_unregister(). -+ * -+ * @todo Should this do something? Should it free the PCD? -+ */ -+static void dwc_otg_pcd_gadget_release(struct device *dev) -+{ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); -+} -+ -+static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev) -+{ -+ static char pcd_name[] = "dwc_otg_pcd"; -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ struct gadget_wrapper *d; -+ int retval; -+ -+ d = DWC_ALLOC(sizeof(*d)); -+ if (d == NULL) { -+ return NULL; -+ } -+ -+ memset(d, 0, sizeof(*d)); -+ -+ d->gadget.name = pcd_name; -+ d->pcd = otg_dev->pcd; -+ -+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) -+ strcpy(d->gadget.dev.bus_id, "gadget"); -+#else -+ dev_set_name(&d->gadget.dev, "%s", "gadget"); -+#endif -+ -+ d->gadget.dev.parent = &_dev->dev; -+ d->gadget.dev.release = dwc_otg_pcd_gadget_release; -+ d->gadget.ops = &dwc_otg_pcd_ops; -+ d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL; -+ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd); -+ -+ d->driver = 0; -+ /* Register the gadget device */ -+ retval = device_register(&d->gadget.dev); -+ if (retval != 0) { -+ DWC_ERROR("device_register failed\n"); -+ DWC_FREE(d); -+ return NULL; -+ } -+ -+ return d; -+} -+ -+static void free_wrapper(struct gadget_wrapper *d) -+{ -+ if (d->driver) { -+ /* should have been done already by driver model core */ -+ DWC_WARN("driver '%s' is still registered\n", -+ d->driver->driver.name); -+#ifdef CONFIG_USB_GADGET -+ usb_gadget_unregister_driver(d->driver); -+#endif -+ } -+ -+ device_unregister(&d->gadget.dev); -+ DWC_FREE(d); -+} -+ -+/** -+ * This function initialized the PCD portion of the driver. -+ * -+ */ -+int pcd_init(dwc_bus_dev_t *_dev) -+{ -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ int retval = 0; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev); -+ -+ otg_dev->pcd = dwc_otg_pcd_init(otg_dev); -+ -+ if (!otg_dev->pcd) { -+ DWC_ERROR("dwc_otg_pcd_init failed\n"); -+ return -ENOMEM; -+ } -+ -+ otg_dev->pcd->otg_dev = otg_dev; -+ gadget_wrapper = alloc_wrapper(_dev); -+ -+ /* -+ * Initialize EP structures -+ */ -+ gadget_add_eps(gadget_wrapper); -+ /* -+ * Setup interupt handler -+ */ -+#ifdef PLATFORM_INTERFACE -+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", -+ platform_get_irq(_dev, fiq_enable ? 0 : 1)); -+ retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq, -+ IRQF_SHARED, gadget_wrapper->gadget.name, -+ otg_dev->pcd); -+ if (retval != 0) { -+ DWC_ERROR("request of irq%d failed\n", -+ platform_get_irq(_dev, fiq_enable ? 0 : 1)); -+ free_wrapper(gadget_wrapper); -+ return -EBUSY; -+ } -+#else -+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", -+ _dev->irq); -+ retval = request_irq(_dev->irq, dwc_otg_pcd_irq, -+ IRQF_SHARED | IRQF_DISABLED, -+ gadget_wrapper->gadget.name, otg_dev->pcd); -+ if (retval != 0) { -+ DWC_ERROR("request of irq%d failed\n", _dev->irq); -+ free_wrapper(gadget_wrapper); -+ return -EBUSY; -+ } -+#endif -+ -+ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops); -+ -+ return retval; -+} -+ -+/** -+ * Cleanup the PCD. -+ */ -+void pcd_remove(dwc_bus_dev_t *_dev) -+{ -+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev); -+ dwc_otg_pcd_t *pcd = otg_dev->pcd; -+ -+ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev); -+ -+ /* -+ * Free the IRQ -+ */ -+#ifdef PLATFORM_INTERFACE -+ free_irq(platform_get_irq(_dev, 0), pcd); -+#else -+ free_irq(_dev->irq, pcd); -+#endif -+ dwc_otg_pcd_remove(otg_dev->pcd); -+ free_wrapper(gadget_wrapper); -+ otg_dev->pcd = 0; -+} -+ -+#endif /* DWC_HOST_ONLY */ ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h -@@ -0,0 +1,2550 @@ -+/* ========================================================================== -+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ -+ * $Revision: #98 $ -+ * $Date: 2012/08/10 $ -+ * $Change: 2047372 $ -+ * -+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, -+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless -+ * otherwise expressly agreed to in writing between Synopsys and you. -+ * -+ * The Software IS NOT an item of Licensed Software or Licensed Product under -+ * any End User Software License Agreement or Agreement for Licensed Product -+ * with Synopsys or any supplement thereto. You are permitted to use and -+ * redistribute this Software in source and binary forms, with or without -+ * modification, provided that redistributions of source code must retain this -+ * notice. You may not view, use, disclose, copy or distribute this file or -+ * any information contained herein except pursuant to this license grant from -+ * Synopsys. If you do not agree with this notice, including the disclaimer -+ * below, then you are not authorized to use the Software. -+ * -+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS -+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, -+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH -+ * DAMAGE. -+ * ========================================================================== */ -+ -+#ifndef __DWC_OTG_REGS_H__ -+#define __DWC_OTG_REGS_H__ -+ -+#include "dwc_otg_core_if.h" -+ -+/** -+ * @file -+ * -+ * This file contains the data structures for accessing the DWC_otg core registers. -+ * -+ * The application interfaces with the HS OTG core by reading from and -+ * writing to the Control and Status Register (CSR) space through the -+ * AHB Slave interface. These registers are 32 bits wide, and the -+ * addresses are 32-bit-block aligned. -+ * CSRs are classified as follows: -+ * - Core Global Registers -+ * - Device Mode Registers -+ * - Device Global Registers -+ * - Device Endpoint Specific Registers -+ * - Host Mode Registers -+ * - Host Global Registers -+ * - Host Port CSRs -+ * - Host Channel Specific Registers -+ * -+ * Only the Core Global registers can be accessed in both Device and -+ * Host modes. When the HS OTG core is operating in one mode, either -+ * Device or Host, the application must not access registers from the -+ * other mode. When the core switches from one mode to another, the -+ * registers in the new mode of operation must be reprogrammed as they -+ * would be after a power-on reset. -+ */ -+ -+/****************************************************************************/ -+/** DWC_otg Core registers . -+ * The dwc_otg_core_global_regs structure defines the size -+ * and relative field offsets for the Core Global registers. -+ */ -+typedef struct dwc_otg_core_global_regs { -+ /** OTG Control and Status Register. <i>Offset: 000h</i> */ -+ volatile uint32_t gotgctl; -+ /** OTG Interrupt Register. <i>Offset: 004h</i> */ -+ volatile uint32_t gotgint; -+ /**Core AHB Configuration Register. <i>Offset: 008h</i> */ -+ volatile uint32_t gahbcfg; -+ -+#define DWC_GLBINTRMASK 0x0001 -+#define DWC_DMAENABLE 0x0020 -+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 -+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 -+#define DWC_PTXEMPTYLVL_EMPTY 0x0100 -+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 -+ -+ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */ -+ volatile uint32_t gusbcfg; -+ /**Core Reset Register. <i>Offset: 010h</i> */ -+ volatile uint32_t grstctl; -+ /**Core Interrupt Register. <i>Offset: 014h</i> */ -+ volatile uint32_t gintsts; -+ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */ -+ volatile uint32_t gintmsk; -+ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */ -+ volatile uint32_t grxstsr; -+ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/ -+ volatile uint32_t grxstsp; -+ /**Receive FIFO Size Register. <i>Offset: 024h</i> */ -+ volatile uint32_t grxfsiz; -+ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */ -+ volatile uint32_t gnptxfsiz; -+ /**Non Periodic Transmit FIFO/Queue Status Register (Read -+ * Only). <i>Offset: 02Ch</i> */ -+ volatile uint32_t gnptxsts; -+ /**I2C Access Register. <i>Offset: 030h</i> */ -+ volatile uint32_t gi2cctl; -+ /**PHY Vendor Control Register. <i>Offset: 034h</i> */ -+ volatile uint32_t gpvndctl; -+ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */ -+ volatile uint32_t ggpio; -+ /**User ID Register. <i>Offset: 03Ch</i> */ -+ volatile uint32_t guid; -+ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */ -+ volatile uint32_t gsnpsid; -+ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */ -+ volatile uint32_t ghwcfg1; -+ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */ -+ volatile uint32_t ghwcfg2; -+#define DWC_SLAVE_ONLY_ARCH 0 -+#define DWC_EXT_DMA_ARCH 1 -+#define DWC_INT_DMA_ARCH 2 -+ -+#define DWC_MODE_HNP_SRP_CAPABLE 0 -+#define DWC_MODE_SRP_ONLY_CAPABLE 1 -+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 -+#define DWC_MODE_SRP_CAPABLE_DEVICE 3 -+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 -+#define DWC_MODE_SRP_CAPABLE_HOST 5 -+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 -+ -+ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */ -+ volatile uint32_t ghwcfg3; -+ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/ -+ volatile uint32_t ghwcfg4; -+ /** Core LPM Configuration register <i>Offset: 054h</i>*/ -+ volatile uint32_t glpmcfg; -+ /** Global PowerDn Register <i>Offset: 058h</i> */ -+ volatile uint32_t gpwrdn; -+ /** Global DFIFO SW Config Register <i>Offset: 05Ch</i> */ -+ volatile uint32_t gdfifocfg; -+ /** ADP Control Register <i>Offset: 060h</i> */ -+ volatile uint32_t adpctl; -+ /** Reserved <i>Offset: 064h-0FFh</i> */ -+ volatile uint32_t reserved39[39]; -+ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */ -+ volatile uint32_t hptxfsiz; -+ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, -+ otherwise Device Transmit FIFO#n Register. -+ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */ -+ volatile uint32_t dtxfsiz[15]; -+} dwc_otg_core_global_regs_t; -+ -+/** -+ * This union represents the bit fields of the Core OTG Control -+ * and Status Register (GOTGCTL). Set the bits using the bit -+ * fields then write the <i>d32</i> value to the register. -+ */ -+typedef union gotgctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned sesreqscs:1; -+ unsigned sesreq:1; -+ unsigned vbvalidoven:1; -+ unsigned vbvalidovval:1; -+ unsigned avalidoven:1; -+ unsigned avalidovval:1; -+ unsigned bvalidoven:1; -+ unsigned bvalidovval:1; -+ unsigned hstnegscs:1; -+ unsigned hnpreq:1; -+ unsigned hstsethnpen:1; -+ unsigned devhnpen:1; -+ unsigned reserved12_15:4; -+ unsigned conidsts:1; -+ unsigned dbnctime:1; -+ unsigned asesvld:1; -+ unsigned bsesvld:1; -+ unsigned otgver:1; -+ unsigned reserved1:1; -+ unsigned multvalidbc:5; -+ unsigned chirpen:1; -+ unsigned reserved28_31:4; -+ } b; -+} gotgctl_data_t; -+ -+/** -+ * This union represents the bit fields of the Core OTG Interrupt Register -+ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i> -+ * value to the register. -+ */ -+typedef union gotgint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Current Mode */ -+ unsigned reserved0_1:2; -+ -+ /** Session End Detected */ -+ unsigned sesenddet:1; -+ -+ unsigned reserved3_7:5; -+ -+ /** Session Request Success Status Change */ -+ unsigned sesreqsucstschng:1; -+ /** Host Negotiation Success Status Change */ -+ unsigned hstnegsucstschng:1; -+ -+ unsigned reserved10_16:7; -+ -+ /** Host Negotiation Detected */ -+ unsigned hstnegdet:1; -+ /** A-Device Timeout Change */ -+ unsigned adevtoutchng:1; -+ /** Debounce Done */ -+ unsigned debdone:1; -+ /** Multi-Valued input changed */ -+ unsigned mvic:1; -+ -+ unsigned reserved31_21:11; -+ -+ } b; -+} gotgint_data_t; -+ -+/** -+ * This union represents the bit fields of the Core AHB Configuration -+ * Register (GAHBCFG). Set/clear the bits using the bit fields then -+ * write the <i>d32</i> value to the register. -+ */ -+typedef union gahbcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned glblintrmsk:1; -+#define DWC_GAHBCFG_GLBINT_ENABLE 1 -+ -+ unsigned hburstlen:4; -+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 -+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 -+ -+ unsigned dmaenable:1; -+#define DWC_GAHBCFG_DMAENABLE 1 -+ unsigned reserved:1; -+ unsigned nptxfemplvl_txfemplvl:1; -+ unsigned ptxfemplvl:1; -+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 -+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 -+ unsigned reserved9_20:12; -+ unsigned remmemsupp:1; -+ unsigned notialldmawrit:1; -+ unsigned ahbsingle:1; -+ unsigned reserved24_31:8; -+ } b; -+} gahbcfg_data_t; -+ -+/** -+ * This union represents the bit fields of the Core USB Configuration -+ * Register (GUSBCFG). Set the bits using the bit fields then write -+ * the <i>d32</i> value to the register. -+ */ -+typedef union gusbcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned toutcal:3; -+ unsigned phyif:1; -+ unsigned ulpi_utmi_sel:1; -+ unsigned fsintf:1; -+ unsigned physel:1; -+ unsigned ddrsel:1; -+ unsigned srpcap:1; -+ unsigned hnpcap:1; -+ unsigned usbtrdtim:4; -+ unsigned reserved1:1; -+ unsigned phylpwrclksel:1; -+ unsigned otgutmifssel:1; -+ unsigned ulpi_fsls:1; -+ unsigned ulpi_auto_res:1; -+ unsigned ulpi_clk_sus_m:1; -+ unsigned ulpi_ext_vbus_drv:1; -+ unsigned ulpi_int_vbus_indicator:1; -+ unsigned term_sel_dl_pulse:1; -+ unsigned indicator_complement:1; -+ unsigned indicator_pass_through:1; -+ unsigned ulpi_int_prot_dis:1; -+ unsigned ic_usb_cap:1; -+ unsigned ic_traffic_pull_remove:1; -+ unsigned tx_end_delay:1; -+ unsigned force_host_mode:1; -+ unsigned force_dev_mode:1; -+ unsigned reserved31:1; -+ } b; -+} gusbcfg_data_t; -+ -+/** -+ * This union represents the bit fields of the Core Reset Register -+ * (GRSTCTL). Set/clear the bits using the bit fields then write the -+ * <i>d32</i> value to the register. -+ */ -+typedef union grstctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Core Soft Reset (CSftRst) (Device and Host) -+ * -+ * The application can flush the control logic in the -+ * entire core using this bit. This bit resets the -+ * pipelines in the AHB Clock domain as well as the -+ * PHY Clock domain. -+ * -+ * The state machines are reset to an IDLE state, the -+ * control bits in the CSRs are cleared, all the -+ * transmit FIFOs and the receive FIFO are flushed. -+ * -+ * The status mask bits that control the generation of -+ * the interrupt, are cleared, to clear the -+ * interrupt. The interrupt status bits are not -+ * cleared, so the application can get the status of -+ * any events that occurred in the core after it has -+ * set this bit. -+ * -+ * Any transactions on the AHB are terminated as soon -+ * as possible following the protocol. Any -+ * transactions on the USB are terminated immediately. -+ * -+ * The configuration settings in the CSRs are -+ * unchanged, so the software doesn't have to -+ * reprogram these registers (Device -+ * Configuration/Host Configuration/Core System -+ * Configuration/Core PHY Configuration). -+ * -+ * The application can write to this bit, any time it -+ * wants to reset the core. This is a self clearing -+ * bit and the core clears this bit after all the -+ * necessary logic is reset in the core, which may -+ * take several clocks, depending on the current state -+ * of the core. -+ */ -+ unsigned csftrst:1; -+ /** Hclk Soft Reset -+ * -+ * The application uses this bit to reset the control logic in -+ * the AHB clock domain. Only AHB clock domain pipelines are -+ * reset. -+ */ -+ unsigned hsftrst:1; -+ /** Host Frame Counter Reset (Host Only)<br> -+ * -+ * The application can reset the (micro)frame number -+ * counter inside the core, using this bit. When the -+ * (micro)frame counter is reset, the subsequent SOF -+ * sent out by the core, will have a (micro)frame -+ * number of 0. -+ */ -+ unsigned hstfrm:1; -+ /** In Token Sequence Learning Queue Flush -+ * (INTknQFlsh) (Device Only) -+ */ -+ unsigned intknqflsh:1; -+ /** RxFIFO Flush (RxFFlsh) (Device and Host) -+ * -+ * The application can flush the entire Receive FIFO -+ * using this bit. The application must first -+ * ensure that the core is not in the middle of a -+ * transaction. The application should write into -+ * this bit, only after making sure that neither the -+ * DMA engine is reading from the RxFIFO nor the MAC -+ * is writing the data in to the FIFO. The -+ * application should wait until the bit is cleared -+ * before performing any other operations. This bit -+ * will takes 8 clocks (slowest of PHY or AHB clock) -+ * to clear. -+ */ -+ unsigned rxfflsh:1; -+ /** TxFIFO Flush (TxFFlsh) (Device and Host). -+ * -+ * This bit is used to selectively flush a single or -+ * all transmit FIFOs. The application must first -+ * ensure that the core is not in the middle of a -+ * transaction. The application should write into -+ * this bit, only after making sure that neither the -+ * DMA engine is writing into the TxFIFO nor the MAC -+ * is reading the data out of the FIFO. The -+ * application should wait until the core clears this -+ * bit, before performing any operations. This bit -+ * will takes 8 clocks (slowest of PHY or AHB clock) -+ * to clear. -+ */ -+ unsigned txfflsh:1; -+ -+ /** TxFIFO Number (TxFNum) (Device and Host). -+ * -+ * This is the FIFO number which needs to be flushed, -+ * using the TxFIFO Flush bit. This field should not -+ * be changed until the TxFIFO Flush bit is cleared by -+ * the core. -+ * - 0x0 : Non Periodic TxFIFO Flush -+ * - 0x1 : Periodic TxFIFO #1 Flush in device mode -+ * or Periodic TxFIFO in host mode -+ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. -+ * - ... -+ * - 0xF : Periodic TxFIFO #15 Flush in device mode -+ * - 0x10: Flush all the Transmit NonPeriodic and -+ * Transmit Periodic FIFOs in the core -+ */ -+ unsigned txfnum:5; -+ /** Reserved */ -+ unsigned reserved11_29:19; -+ /** DMA Request Signal. Indicated DMA request is in -+ * probress. Used for debug purpose. */ -+ unsigned dmareq:1; -+ /** AHB Master Idle. Indicates the AHB Master State -+ * Machine is in IDLE condition. */ -+ unsigned ahbidle:1; -+ } b; -+} grstctl_t; -+ -+/** -+ * This union represents the bit fields of the Core Interrupt Mask -+ * Register (GINTMSK). Set/clear the bits using the bit fields then -+ * write the <i>d32</i> value to the register. -+ */ -+typedef union gintmsk_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned reserved0:1; -+ unsigned modemismatch:1; -+ unsigned otgintr:1; -+ unsigned sofintr:1; -+ unsigned rxstsqlvl:1; -+ unsigned nptxfempty:1; -+ unsigned ginnakeff:1; -+ unsigned goutnakeff:1; -+ unsigned ulpickint:1; -+ unsigned i2cintr:1; -+ unsigned erlysuspend:1; -+ unsigned usbsuspend:1; -+ unsigned usbreset:1; -+ unsigned enumdone:1; -+ unsigned isooutdrop:1; -+ unsigned eopframe:1; -+ unsigned restoredone:1; -+ unsigned epmismatch:1; -+ unsigned inepintr:1; -+ unsigned outepintr:1; -+ unsigned incomplisoin:1; -+ unsigned incomplisoout:1; -+ unsigned fetsusp:1; -+ unsigned resetdet:1; -+ unsigned portintr:1; -+ unsigned hcintr:1; -+ unsigned ptxfempty:1; -+ unsigned lpmtranrcvd:1; -+ unsigned conidstschng:1; -+ unsigned disconnect:1; -+ unsigned sessreqintr:1; -+ unsigned wkupintr:1; -+ } b; -+} gintmsk_data_t; -+/** -+ * This union represents the bit fields of the Core Interrupt Register -+ * (GINTSTS). Set/clear the bits using the bit fields then write the -+ * <i>d32</i> value to the register. -+ */ -+typedef union gintsts_data { -+ /** raw register data */ -+ uint32_t d32; -+#define DWC_SOF_INTR_MASK 0x0008 -+ /** register bits */ -+ struct { -+#define DWC_HOST_MODE 1 -+ unsigned curmode:1; -+ unsigned modemismatch:1; -+ unsigned otgintr:1; -+ unsigned sofintr:1; -+ unsigned rxstsqlvl:1; -+ unsigned nptxfempty:1; -+ unsigned ginnakeff:1; -+ unsigned goutnakeff:1; -+ unsigned ulpickint:1; -+ unsigned i2cintr:1; -+ unsigned erlysuspend:1; -+ unsigned usbsuspend:1; -+ unsigned usbreset:1; -+ unsigned enumdone:1; -+ unsigned isooutdrop:1; -+ unsigned eopframe:1; -+ unsigned restoredone:1; -+ unsigned epmismatch:1; -+ unsigned inepint:1; -+ unsigned outepintr:1; -+ unsigned incomplisoin:1; -+ unsigned incomplisoout:1; -+ unsigned fetsusp:1; -+ unsigned resetdet:1; -+ unsigned portintr:1; -+ unsigned hcintr:1; -+ unsigned ptxfempty:1; -+ unsigned lpmtranrcvd:1; -+ unsigned conidstschng:1; -+ unsigned disconnect:1; -+ unsigned sessreqintr:1; -+ unsigned wkupintr:1; -+ } b; -+} gintsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Device Receive Status Read and -+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> -+ * element then read out the bits using the <i>b</i>it elements. -+ */ -+typedef union device_grxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned epnum:4; -+ unsigned bcnt:11; -+ unsigned dpid:2; -+ -+#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet -+#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete -+ -+#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK -+#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete -+#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet -+ unsigned pktsts:4; -+ unsigned fn:4; -+ unsigned reserved25_31:7; -+ } b; -+} device_grxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Receive Status Read and -+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> -+ * element then read out the bits using the <i>b</i>it elements. -+ */ -+typedef union host_grxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned chnum:4; -+ unsigned bcnt:11; -+ unsigned dpid:2; -+ -+ unsigned pktsts:4; -+#define DWC_GRXSTS_PKTSTS_IN 0x2 -+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 -+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 -+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 -+ -+ unsigned reserved21_31:11; -+ } b; -+} host_grxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, -+ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element -+ * then read out the bits using the <i>b</i>it elements. -+ */ -+typedef union fifosize_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned startaddr:16; -+ unsigned depth:16; -+ } b; -+} fifosize_data_t; -+ -+/** -+ * This union represents the bit fields in the Non-Periodic Transmit -+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the -+ * <i>d32</i> element then read out the bits using the <i>b</i>it -+ * elements. -+ */ -+typedef union gnptxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned nptxfspcavail:16; -+ unsigned nptxqspcavail:8; -+ /** Top of the Non-Periodic Transmit Request Queue -+ * - bit 24 - Terminate (Last entry for the selected -+ * channel/EP) -+ * - bits 26:25 - Token Type -+ * - 2'b00 - IN/OUT -+ * - 2'b01 - Zero Length OUT -+ * - 2'b10 - PING/Complete Split -+ * - 2'b11 - Channel Halt -+ * - bits 30:27 - Channel/EP Number -+ */ -+ unsigned nptxqtop_terminate:1; -+ unsigned nptxqtop_token:2; -+ unsigned nptxqtop_chnep:4; -+ unsigned reserved:1; -+ } b; -+} gnptxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Transmit -+ * FIFO Status Register (DTXFSTS). Read the register into the -+ * <i>d32</i> element then read out the bits using the <i>b</i>it -+ * elements. -+ */ -+typedef union dtxfsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned txfspcavail:16; -+ unsigned reserved:16; -+ } b; -+} dtxfsts_data_t; -+ -+/** -+ * This union represents the bit fields in the I2C Control Register -+ * (I2CCTL). Read the register into the <i>d32</i> element then read out the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union gi2cctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned rwdata:8; -+ unsigned regaddr:8; -+ unsigned addr:7; -+ unsigned i2cen:1; -+ unsigned ack:1; -+ unsigned i2csuspctl:1; -+ unsigned i2cdevaddr:2; -+ unsigned i2cdatse0:1; -+ unsigned reserved:1; -+ unsigned rw:1; -+ unsigned bsydne:1; -+ } b; -+} gi2cctl_data_t; -+ -+/** -+ * This union represents the bit fields in the PHY Vendor Control Register -+ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union gpvndctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned regdata:8; -+ unsigned vctrl:8; -+ unsigned regaddr16_21:6; -+ unsigned regwr:1; -+ unsigned reserved23_24:2; -+ unsigned newregreq:1; -+ unsigned vstsbsy:1; -+ unsigned vstsdone:1; -+ unsigned reserved28_30:3; -+ unsigned disulpidrvr:1; -+ } b; -+} gpvndctl_data_t; -+ -+/** -+ * This union represents the bit fields in the General Purpose -+ * Input/Output Register (GGPIO). -+ * Read the register into the <i>d32</i> element then read out the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union ggpio_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned gpi:16; -+ unsigned gpo:16; -+ } b; -+} ggpio_data_t; -+ -+/** -+ * This union represents the bit fields in the User ID Register -+ * (GUID). Read the register into the <i>d32</i> element then read out the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union guid_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned rwdata:32; -+ } b; -+} guid_data_t; -+ -+/** -+ * This union represents the bit fields in the Synopsys ID Register -+ * (GSNPSID). Read the register into the <i>d32</i> element then read out the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union gsnpsid_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned rwdata:32; -+ } b; -+} gsnpsid_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config1 -+ * Register. Read the register into the <i>d32</i> element then read -+ * out the bits using the <i>b</i>it elements. -+ */ -+typedef union hwcfg1_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned ep_dir0:2; -+ unsigned ep_dir1:2; -+ unsigned ep_dir2:2; -+ unsigned ep_dir3:2; -+ unsigned ep_dir4:2; -+ unsigned ep_dir5:2; -+ unsigned ep_dir6:2; -+ unsigned ep_dir7:2; -+ unsigned ep_dir8:2; -+ unsigned ep_dir9:2; -+ unsigned ep_dir10:2; -+ unsigned ep_dir11:2; -+ unsigned ep_dir12:2; -+ unsigned ep_dir13:2; -+ unsigned ep_dir14:2; -+ unsigned ep_dir15:2; -+ } b; -+} hwcfg1_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config2 -+ * Register. Read the register into the <i>d32</i> element then read -+ * out the bits using the <i>b</i>it elements. -+ */ -+typedef union hwcfg2_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /* GHWCFG2 */ -+ unsigned op_mode:3; -+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 -+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 -+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 -+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 -+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 -+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 -+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 -+ -+ unsigned architecture:2; -+ unsigned point2point:1; -+ unsigned hs_phy_type:2; -+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 -+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 -+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 -+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 -+ -+ unsigned fs_phy_type:2; -+ unsigned num_dev_ep:4; -+ unsigned num_host_chan:4; -+ unsigned perio_ep_supported:1; -+ unsigned dynamic_fifo:1; -+ unsigned multi_proc_int:1; -+ unsigned reserved21:1; -+ unsigned nonperio_tx_q_depth:2; -+ unsigned host_perio_tx_q_depth:2; -+ unsigned dev_token_q_depth:5; -+ unsigned otg_enable_ic_usb:1; -+ } b; -+} hwcfg2_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config3 -+ * Register. Read the register into the <i>d32</i> element then read -+ * out the bits using the <i>b</i>it elements. -+ */ -+typedef union hwcfg3_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /* GHWCFG3 */ -+ unsigned xfer_size_cntr_width:4; -+ unsigned packet_size_cntr_width:3; -+ unsigned otg_func:1; -+ unsigned i2c:1; -+ unsigned vendor_ctrl_if:1; -+ unsigned optional_features:1; -+ unsigned synch_reset_type:1; -+ unsigned adp_supp:1; -+ unsigned otg_enable_hsic:1; -+ unsigned bc_support:1; -+ unsigned otg_lpm_en:1; -+ unsigned dfifo_depth:16; -+ } b; -+} hwcfg3_data_t; -+ -+/** -+ * This union represents the bit fields in the User HW Config4 -+ * Register. Read the register into the <i>d32</i> element then read -+ * out the bits using the <i>b</i>it elements. -+ */ -+typedef union hwcfg4_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned num_dev_perio_in_ep:4; -+ unsigned power_optimiz:1; -+ unsigned min_ahb_freq:1; -+ unsigned hiber:1; -+ unsigned xhiber:1; -+ unsigned reserved:6; -+ unsigned utmi_phy_data_width:2; -+ unsigned num_dev_mode_ctrl_ep:4; -+ unsigned iddig_filt_en:1; -+ unsigned vbus_valid_filt_en:1; -+ unsigned a_valid_filt_en:1; -+ unsigned b_valid_filt_en:1; -+ unsigned session_end_filt_en:1; -+ unsigned ded_fifo_en:1; -+ unsigned num_in_eps:4; -+ unsigned desc_dma:1; -+ unsigned desc_dma_dyn:1; -+ } b; -+} hwcfg4_data_t; -+ -+/** -+ * This union represents the bit fields of the Core LPM Configuration -+ * Register (GLPMCFG). Set the bits using bit fields then write -+ * the <i>d32</i> value to the register. -+ */ -+typedef union glpmctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** LPM-Capable (LPMCap) (Device and Host) -+ * The application uses this bit to control -+ * the DWC_otg core LPM capabilities. -+ */ -+ unsigned lpm_cap_en:1; -+ /** LPM response programmed by application (AppL1Res) (Device) -+ * Handshake response to LPM token pre-programmed -+ * by device application software. -+ */ -+ unsigned appl_resp:1; -+ /** Host Initiated Resume Duration (HIRD) (Device and Host) -+ * In Host mode this field indicates the value of HIRD -+ * to be sent in an LPM transaction. -+ * In Device mode this field is updated with the -+ * Received LPM Token HIRD bmAttribute -+ * when an ACK/NYET/STALL response is sent -+ * to an LPM transaction. -+ */ -+ unsigned hird:4; -+ /** RemoteWakeEnable (bRemoteWake) (Device and Host) -+ * In Host mode this bit indicates the value of remote -+ * wake up to be sent in wIndex field of LPM transaction. -+ * In Device mode this field is updated with the -+ * Received LPM Token bRemoteWake bmAttribute -+ * when an ACK/NYET/STALL response is sent -+ * to an LPM transaction. -+ */ -+ unsigned rem_wkup_en:1; -+ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host) -+ * The application uses this bit to control -+ * the utmi_sleep_n assertion to the PHY when in L1 state. -+ */ -+ unsigned en_utmi_sleep:1; -+ /** HIRD Threshold (HIRD_Thres) (Device and Host) -+ */ -+ unsigned hird_thres:5; -+ /** LPM Response (CoreL1Res) (Device and Host) -+ * In Host mode this bit contains handsake response to -+ * LPM transaction. -+ * In Device mode the response of the core to -+ * LPM transaction received is reflected in these two bits. -+ - 0x0 : ERROR (No handshake response) -+ - 0x1 : STALL -+ - 0x2 : NYET -+ - 0x3 : ACK -+ */ -+ unsigned lpm_resp:2; -+ /** Port Sleep Status (SlpSts) (Device and Host) -+ * This bit is set as long as a Sleep condition -+ * is present on the USB bus. -+ */ -+ unsigned prt_sleep_sts:1; -+ /** Sleep State Resume OK (L1ResumeOK) (Device and Host) -+ * Indicates that the application or host -+ * can start resume from Sleep state. -+ */ -+ unsigned sleep_state_resumeok:1; -+ /** LPM channel Index (LPM_Chnl_Indx) (Host) -+ * The channel number on which the LPM transaction -+ * has to be applied while sending -+ * an LPM transaction to the local device. -+ */ -+ unsigned lpm_chan_index:4; -+ /** LPM Retry Count (LPM_Retry_Cnt) (Host) -+ * Number host retries that would be performed -+ * if the device response was not valid response. -+ */ -+ unsigned retry_count:3; -+ /** Send LPM Transaction (SndLPM) (Host) -+ * When set by application software, -+ * an LPM transaction containing two tokens -+ * is sent. -+ */ -+ unsigned send_lpm:1; -+ /** LPM Retry status (LPM_RetryCnt_Sts) (Host) -+ * Number of LPM Host Retries still remaining -+ * to be transmitted for the current LPM sequence -+ */ -+ unsigned retry_count_sts:3; -+ unsigned reserved28_29:2; -+ /** In host mode once this bit is set, the host -+ * configures to drive the HSIC Idle state on the bus. -+ * It then waits for the device to initiate the Connect sequence. -+ * In device mode once this bit is set, the device waits for -+ * the HSIC Idle line state on the bus. Upon receving the Idle -+ * line state, it initiates the HSIC Connect sequence. -+ */ -+ unsigned hsic_connect:1; -+ /** This bit overrides and functionally inverts -+ * the if_select_hsic input port signal. -+ */ -+ unsigned inv_sel_hsic:1; -+ } b; -+} glpmcfg_data_t; -+ -+/** -+ * This union represents the bit fields of the Core ADP Timer, Control and -+ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write -+ * the <i>d32</i> value to the register. -+ */ -+typedef union adpctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Probe Discharge (PRB_DSCHG) -+ * These bits set the times for TADP_DSCHG. -+ * These bits are defined as follows: -+ * 2'b00 - 4 msec -+ * 2'b01 - 8 msec -+ * 2'b10 - 16 msec -+ * 2'b11 - 32 msec -+ */ -+ unsigned prb_dschg:2; -+ /** Probe Delta (PRB_DELTA) -+ * These bits set the resolution for RTIM value. -+ * The bits are defined in units of 32 kHz clock cycles as follows: -+ * 2'b00 - 1 cycles -+ * 2'b01 - 2 cycles -+ * 2'b10 - 3 cycles -+ * 2'b11 - 4 cycles -+ * For example if this value is chosen to 2'b01, it means that RTIM -+ * increments for every 3(three) 32Khz clock cycles. -+ */ -+ unsigned prb_delta:2; -+ /** Probe Period (PRB_PER) -+ * These bits sets the TADP_PRD as shown in Figure 4 as follows: -+ * 2'b00 - 0.625 to 0.925 sec (typical 0.775 sec) -+ * 2'b01 - 1.25 to 1.85 sec (typical 1.55 sec) -+ * 2'b10 - 1.9 to 2.6 sec (typical 2.275 sec) -+ * 2'b11 - Reserved -+ */ -+ unsigned prb_per:2; -+ /** These bits capture the latest time it took for VBUS to ramp from -+ * VADP_SINK to VADP_PRB. -+ * 0x000 - 1 cycles -+ * 0x001 - 2 cycles -+ * 0x002 - 3 cycles -+ * etc -+ * 0x7FF - 2048 cycles -+ * A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec. -+ */ -+ unsigned rtim:11; -+ /** Enable Probe (EnaPrb) -+ * When programmed to 1'b1, the core performs a probe operation. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned enaprb:1; -+ /** Enable Sense (EnaSns) -+ * When programmed to 1'b1, the core performs a Sense operation. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned enasns:1; -+ /** ADP Reset (ADPRes) -+ * When set, ADP controller is reset. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adpres:1; -+ /** ADP Enable (ADPEn) -+ * When set, the core performs either ADP probing or sensing -+ * based on EnaPrb or EnaSns. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adpen:1; -+ /** ADP Probe Interrupt (ADP_PRB_INT) -+ * When this bit is set, it means that the VBUS -+ * voltage is greater than VADP_PRB or VADP_PRB is reached. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_prb_int:1; -+ /** -+ * ADP Sense Interrupt (ADP_SNS_INT) -+ * When this bit is set, it means that the VBUS voltage is greater than -+ * VADP_SNS value or VADP_SNS is reached. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_sns_int:1; -+ /** ADP Tomeout Interrupt (ADP_TMOUT_INT) -+ * This bit is relevant only for an ADP probe. -+ * When this bit is set, it means that the ramp time has -+ * completed ie ADPCTL.RTIM has reached its terminal value -+ * of 0x7FF. This is a debug feature that allows software -+ * to read the ramp time after each cycle. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_tmout_int:1; -+ /** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK) -+ * When this bit is set, it unmasks the interrupt due to ADP_PRB_INT. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_prb_int_msk:1; -+ /** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK) -+ * When this bit is set, it unmasks the interrupt due to ADP_SNS_INT. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_sns_int_msk:1; -+ /** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK) -+ * When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT. -+ * This bit is valid only if OTG_Ver = 1'b1. -+ */ -+ unsigned adp_tmout_int_msk:1; -+ /** Access Request -+ * 2'b00 - Read/Write Valid (updated by the core) -+ * 2'b01 - Read -+ * 2'b00 - Write -+ * 2'b00 - Reserved -+ */ -+ unsigned ar:2; -+ /** Reserved */ -+ unsigned reserved29_31:3; -+ } b; -+} adpctl_data_t; -+ -+//////////////////////////////////////////// -+// Device Registers -+/** -+ * Device Global Registers. <i>Offsets 800h-BFFh</i> -+ * -+ * The following structures define the size and relative field offsets -+ * for the Device Mode Registers. -+ * -+ * <i>These registers are visible only in Device mode and must not be -+ * accessed in Host mode, as the results are unknown.</i> -+ */ -+typedef struct dwc_otg_dev_global_regs { -+ /** Device Configuration Register. <i>Offset 800h</i> */ -+ volatile uint32_t dcfg; -+ /** Device Control Register. <i>Offset: 804h</i> */ -+ volatile uint32_t dctl; -+ /** Device Status Register (Read Only). <i>Offset: 808h</i> */ -+ volatile uint32_t dsts; -+ /** Reserved. <i>Offset: 80Ch</i> */ -+ uint32_t unused; -+ /** Device IN Endpoint Common Interrupt Mask -+ * Register. <i>Offset: 810h</i> */ -+ volatile uint32_t diepmsk; -+ /** Device OUT Endpoint Common Interrupt Mask -+ * Register. <i>Offset: 814h</i> */ -+ volatile uint32_t doepmsk; -+ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */ -+ volatile uint32_t daint; -+ /** Device All Endpoints Interrupt Mask Register. <i>Offset: -+ * 81Ch</i> */ -+ volatile uint32_t daintmsk; -+ /** Device IN Token Queue Read Register-1 (Read Only). -+ * <i>Offset: 820h</i> */ -+ volatile uint32_t dtknqr1; -+ /** Device IN Token Queue Read Register-2 (Read Only). -+ * <i>Offset: 824h</i> */ -+ volatile uint32_t dtknqr2; -+ /** Device VBUS discharge Register. <i>Offset: 828h</i> */ -+ volatile uint32_t dvbusdis; -+ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */ -+ volatile uint32_t dvbuspulse; -+ /** Device IN Token Queue Read Register-3 (Read Only). / -+ * Device Thresholding control register (Read/Write) -+ * <i>Offset: 830h</i> */ -+ volatile uint32_t dtknqr3_dthrctl; -+ /** Device IN Token Queue Read Register-4 (Read Only). / -+ * Device IN EPs empty Inr. Mask Register (Read/Write) -+ * <i>Offset: 834h</i> */ -+ volatile uint32_t dtknqr4_fifoemptymsk; -+ /** Device Each Endpoint Interrupt Register (Read Only). / -+ * <i>Offset: 838h</i> */ -+ volatile uint32_t deachint; -+ /** Device Each Endpoint Interrupt mask Register (Read/Write). / -+ * <i>Offset: 83Ch</i> */ -+ volatile uint32_t deachintmsk; -+ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / -+ * <i>Offset: 840h</i> */ -+ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; -+ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / -+ * <i>Offset: 880h</i> */ -+ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; -+} dwc_otg_device_global_regs_t; -+ -+/** -+ * This union represents the bit fields in the Device Configuration -+ * Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. Write the -+ * <i>d32</i> member to the dcfg register. -+ */ -+typedef union dcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Device Speed */ -+ unsigned devspd:2; -+ /** Non Zero Length Status OUT Handshake */ -+ unsigned nzstsouthshk:1; -+#define DWC_DCFG_SEND_STALL 1 -+ -+ unsigned ena32khzs:1; -+ /** Device Addresses */ -+ unsigned devaddr:7; -+ /** Periodic Frame Interval */ -+ unsigned perfrint:2; -+#define DWC_DCFG_FRAME_INTERVAL_80 0 -+#define DWC_DCFG_FRAME_INTERVAL_85 1 -+#define DWC_DCFG_FRAME_INTERVAL_90 2 -+#define DWC_DCFG_FRAME_INTERVAL_95 3 -+ -+ /** Enable Device OUT NAK for bulk in DDMA mode */ -+ unsigned endevoutnak:1; -+ -+ unsigned reserved14_17:4; -+ /** In Endpoint Mis-match count */ -+ unsigned epmscnt:5; -+ /** Enable Descriptor DMA in Device mode */ -+ unsigned descdma:1; -+ unsigned perschintvl:2; -+ unsigned resvalid:6; -+ } b; -+} dcfg_data_t; -+ -+/** -+ * This union represents the bit fields in the Device Control -+ * Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union dctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Remote Wakeup */ -+ unsigned rmtwkupsig:1; -+ /** Soft Disconnect */ -+ unsigned sftdiscon:1; -+ /** Global Non-Periodic IN NAK Status */ -+ unsigned gnpinnaksts:1; -+ /** Global OUT NAK Status */ -+ unsigned goutnaksts:1; -+ /** Test Control */ -+ unsigned tstctl:3; -+ /** Set Global Non-Periodic IN NAK */ -+ unsigned sgnpinnak:1; -+ /** Clear Global Non-Periodic IN NAK */ -+ unsigned cgnpinnak:1; -+ /** Set Global OUT NAK */ -+ unsigned sgoutnak:1; -+ /** Clear Global OUT NAK */ -+ unsigned cgoutnak:1; -+ /** Power-On Programming Done */ -+ unsigned pwronprgdone:1; -+ /** Reserved */ -+ unsigned reserved:1; -+ /** Global Multi Count */ -+ unsigned gmc:2; -+ /** Ignore Frame Number for ISOC EPs */ -+ unsigned ifrmnum:1; -+ /** NAK on Babble */ -+ unsigned nakonbble:1; -+ /** Enable Continue on BNA */ -+ unsigned encontonbna:1; -+ -+ unsigned reserved18_31:14; -+ } b; -+} dctl_data_t; -+ -+/** -+ * This union represents the bit fields in the Device Status -+ * Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union dsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Suspend Status */ -+ unsigned suspsts:1; -+ /** Enumerated Speed */ -+ unsigned enumspd:2; -+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 -+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 -+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 -+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 -+ /** Erratic Error */ -+ unsigned errticerr:1; -+ unsigned reserved4_7:4; -+ /** Frame or Microframe Number of the received SOF */ -+ unsigned soffn:14; -+ unsigned reserved22_31:10; -+ } b; -+} dsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Device IN EP Interrupt -+ * Register and the Device IN EP Common Mask Register. -+ * -+ * - Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union diepint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer complete mask */ -+ unsigned xfercompl:1; -+ /** Endpoint disable mask */ -+ unsigned epdisabled:1; -+ /** AHB Error mask */ -+ unsigned ahberr:1; -+ /** TimeOUT Handshake mask (non-ISOC EPs) */ -+ unsigned timeout:1; -+ /** IN Token received with TxF Empty mask */ -+ unsigned intktxfemp:1; -+ /** IN Token Received with EP mismatch mask */ -+ unsigned intknepmis:1; -+ /** IN Endpoint NAK Effective mask */ -+ unsigned inepnakeff:1; -+ /** Reserved */ -+ unsigned emptyintr:1; -+ -+ unsigned txfifoundrn:1; -+ -+ /** BNA Interrupt mask */ -+ unsigned bna:1; -+ -+ unsigned reserved10_12:3; -+ /** BNA Interrupt mask */ -+ unsigned nak:1; -+ -+ unsigned reserved14_31:18; -+ } b; -+} diepint_data_t; -+ -+/** -+ * This union represents the bit fields in the Device IN EP -+ * Common/Dedicated Interrupt Mask Register. -+ */ -+typedef union diepint_data diepmsk_data_t; -+ -+/** -+ * This union represents the bit fields in the Device OUT EP Interrupt -+ * Registerand Device OUT EP Common Interrupt Mask Register. -+ * -+ * - Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union doepint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer complete */ -+ unsigned xfercompl:1; -+ /** Endpoint disable */ -+ unsigned epdisabled:1; -+ /** AHB Error */ -+ unsigned ahberr:1; -+ /** Setup Phase Done (contorl EPs) */ -+ unsigned setup:1; -+ /** OUT Token Received when Endpoint Disabled */ -+ unsigned outtknepdis:1; -+ -+ unsigned stsphsercvd:1; -+ /** Back-to-Back SETUP Packets Received */ -+ unsigned back2backsetup:1; -+ -+ unsigned reserved7:1; -+ /** OUT packet Error */ -+ unsigned outpkterr:1; -+ /** BNA Interrupt */ -+ unsigned bna:1; -+ -+ unsigned reserved10:1; -+ /** Packet Drop Status */ -+ unsigned pktdrpsts:1; -+ /** Babble Interrupt */ -+ unsigned babble:1; -+ /** NAK Interrupt */ -+ unsigned nak:1; -+ /** NYET Interrupt */ -+ unsigned nyet:1; -+ /** Bit indicating setup packet received */ -+ unsigned sr:1; -+ -+ unsigned reserved16_31:16; -+ } b; -+} doepint_data_t; -+ -+/** -+ * This union represents the bit fields in the Device OUT EP -+ * Common/Dedicated Interrupt Mask Register. -+ */ -+typedef union doepint_data doepmsk_data_t; -+ -+/** -+ * This union represents the bit fields in the Device All EP Interrupt -+ * and Mask Registers. -+ * - Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union daint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** IN Endpoint bits */ -+ unsigned in:16; -+ /** OUT Endpoint bits */ -+ unsigned out:16; -+ } ep; -+ struct { -+ /** IN Endpoint bits */ -+ unsigned inep0:1; -+ unsigned inep1:1; -+ unsigned inep2:1; -+ unsigned inep3:1; -+ unsigned inep4:1; -+ unsigned inep5:1; -+ unsigned inep6:1; -+ unsigned inep7:1; -+ unsigned inep8:1; -+ unsigned inep9:1; -+ unsigned inep10:1; -+ unsigned inep11:1; -+ unsigned inep12:1; -+ unsigned inep13:1; -+ unsigned inep14:1; -+ unsigned inep15:1; -+ /** OUT Endpoint bits */ -+ unsigned outep0:1; -+ unsigned outep1:1; -+ unsigned outep2:1; -+ unsigned outep3:1; -+ unsigned outep4:1; -+ unsigned outep5:1; -+ unsigned outep6:1; -+ unsigned outep7:1; -+ unsigned outep8:1; -+ unsigned outep9:1; -+ unsigned outep10:1; -+ unsigned outep11:1; -+ unsigned outep12:1; -+ unsigned outep13:1; -+ unsigned outep14:1; -+ unsigned outep15:1; -+ } b; -+} daint_data_t; -+ -+/** -+ * This union represents the bit fields in the Device IN Token Queue -+ * Read Registers. -+ * - Read the register into the <i>d32</i> member. -+ * - READ-ONLY Register -+ */ -+typedef union dtknq1_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** In Token Queue Write Pointer */ -+ unsigned intknwptr:5; -+ /** Reserved */ -+ unsigned reserved05_06:2; -+ /** write pointer has wrapped. */ -+ unsigned wrap_bit:1; -+ /** EP Numbers of IN Tokens 0 ... 4 */ -+ unsigned epnums0_5:24; -+ } b; -+} dtknq1_data_t; -+ -+/** -+ * This union represents Threshold control Register -+ * - Read and write the register into the <i>d32</i> member. -+ * - READ-WRITABLE Register -+ */ -+typedef union dthrctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** non ISO Tx Thr. Enable */ -+ unsigned non_iso_thr_en:1; -+ /** ISO Tx Thr. Enable */ -+ unsigned iso_thr_en:1; -+ /** Tx Thr. Length */ -+ unsigned tx_thr_len:9; -+ /** AHB Threshold ratio */ -+ unsigned ahb_thr_ratio:2; -+ /** Reserved */ -+ unsigned reserved13_15:3; -+ /** Rx Thr. Enable */ -+ unsigned rx_thr_en:1; -+ /** Rx Thr. Length */ -+ unsigned rx_thr_len:9; -+ unsigned reserved26:1; -+ /** Arbiter Parking Enable*/ -+ unsigned arbprken:1; -+ /** Reserved */ -+ unsigned reserved28_31:4; -+ } b; -+} dthrctl_data_t; -+ -+/** -+ * Device Logical IN Endpoint-Specific Registers. <i>Offsets -+ * 900h-AFCh</i> -+ * -+ * There will be one set of endpoint registers per logical endpoint -+ * implemented. -+ * -+ * <i>These registers are visible only in Device mode and must not be -+ * accessed in Host mode, as the results are unknown.</i> -+ */ -+typedef struct dwc_otg_dev_in_ep_regs { -+ /** Device IN Endpoint Control Register. <i>Offset:900h + -+ * (ep_num * 20h) + 00h</i> */ -+ volatile uint32_t diepctl; -+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */ -+ uint32_t reserved04; -+ /** Device IN Endpoint Interrupt Register. <i>Offset:900h + -+ * (ep_num * 20h) + 08h</i> */ -+ volatile uint32_t diepint; -+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */ -+ uint32_t reserved0C; -+ /** Device IN Endpoint Transfer Size -+ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */ -+ volatile uint32_t dieptsiz; -+ /** Device IN Endpoint DMA Address Register. <i>Offset:900h + -+ * (ep_num * 20h) + 14h</i> */ -+ volatile uint32_t diepdma; -+ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h + -+ * (ep_num * 20h) + 18h</i> */ -+ volatile uint32_t dtxfsts; -+ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h + -+ * (ep_num * 20h) + 1Ch</i> */ -+ volatile uint32_t diepdmab; -+} dwc_otg_dev_in_ep_regs_t; -+ -+/** -+ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets: -+ * B00h-CFCh</i> -+ * -+ * There will be one set of endpoint registers per logical endpoint -+ * implemented. -+ * -+ * <i>These registers are visible only in Device mode and must not be -+ * accessed in Host mode, as the results are unknown.</i> -+ */ -+typedef struct dwc_otg_dev_out_ep_regs { -+ /** Device OUT Endpoint Control Register. <i>Offset:B00h + -+ * (ep_num * 20h) + 00h</i> */ -+ volatile uint32_t doepctl; -+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */ -+ uint32_t reserved04; -+ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h + -+ * (ep_num * 20h) + 08h</i> */ -+ volatile uint32_t doepint; -+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */ -+ uint32_t reserved0C; -+ /** Device OUT Endpoint Transfer Size Register. <i>Offset: -+ * B00h + (ep_num * 20h) + 10h</i> */ -+ volatile uint32_t doeptsiz; -+ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h -+ * + (ep_num * 20h) + 14h</i> */ -+ volatile uint32_t doepdma; -+ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 18h</i> */ -+ uint32_t unused; -+ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h -+ * + (ep_num * 20h) + 1Ch</i> */ -+ uint32_t doepdmab; -+} dwc_otg_dev_out_ep_regs_t; -+ -+/** -+ * This union represents the bit fields in the Device EP Control -+ * Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union depctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Maximum Packet Size -+ * IN/OUT EPn -+ * IN/OUT EP0 - 2 bits -+ * 2'b00: 64 Bytes -+ * 2'b01: 32 -+ * 2'b10: 16 -+ * 2'b11: 8 */ -+ unsigned mps:11; -+#define DWC_DEP0CTL_MPS_64 0 -+#define DWC_DEP0CTL_MPS_32 1 -+#define DWC_DEP0CTL_MPS_16 2 -+#define DWC_DEP0CTL_MPS_8 3 -+ -+ /** Next Endpoint -+ * IN EPn/IN EP0 -+ * OUT EPn/OUT EP0 - reserved */ -+ unsigned nextep:4; -+ -+ /** USB Active Endpoint */ -+ unsigned usbactep:1; -+ -+ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) -+ * This field contains the PID of the packet going to -+ * be received or transmitted on this endpoint. The -+ * application should program the PID of the first -+ * packet going to be received or transmitted on this -+ * endpoint , after the endpoint is -+ * activated. Application use the SetD1PID and -+ * SetD0PID fields of this register to program either -+ * D0 or D1 PID. -+ * -+ * The encoding for this field is -+ * - 0: D0 -+ * - 1: D1 -+ */ -+ unsigned dpid:1; -+ -+ /** NAK Status */ -+ unsigned naksts:1; -+ -+ /** Endpoint Type -+ * 2'b00: Control -+ * 2'b01: Isochronous -+ * 2'b10: Bulk -+ * 2'b11: Interrupt */ -+ unsigned eptype:2; -+ -+ /** Snoop Mode -+ * OUT EPn/OUT EP0 -+ * IN EPn/IN EP0 - reserved */ -+ unsigned snp:1; -+ -+ /** Stall Handshake */ -+ unsigned stall:1; -+ -+ /** Tx Fifo Number -+ * IN EPn/IN EP0 -+ * OUT EPn/OUT EP0 - reserved */ -+ unsigned txfnum:4; -+ -+ /** Clear NAK */ -+ unsigned cnak:1; -+ /** Set NAK */ -+ unsigned snak:1; -+ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) -+ * Writing to this field sets the Endpoint DPID (DPID) -+ * field in this register to DATA0. Set Even -+ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) -+ * Writing to this field sets the Even/Odd -+ * (micro)frame (EO_FrNum) field to even (micro) -+ * frame. -+ */ -+ unsigned setd0pid:1; -+ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) -+ * Writing to this field sets the Endpoint DPID (DPID) -+ * field in this register to DATA1 Set Odd -+ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) -+ * Writing to this field sets the Even/Odd -+ * (micro)frame (EO_FrNum) field to odd (micro) frame. -+ */ -+ unsigned setd1pid:1; -+ -+ /** Endpoint Disable */ -+ unsigned epdis:1; -+ /** Endpoint Enable */ -+ unsigned epena:1; -+ } b; -+} depctl_data_t; -+ -+/** -+ * This union represents the bit fields in the Device EP Transfer -+ * Size Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union deptsiz_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer size */ -+ unsigned xfersize:19; -+/** Max packet count for EP (pow(2,10)-1) */ -+#define MAX_PKT_CNT 1023 -+ /** Packet Count */ -+ unsigned pktcnt:10; -+ /** Multi Count - Periodic IN endpoints */ -+ unsigned mc:2; -+ unsigned reserved:1; -+ } b; -+} deptsiz_data_t; -+ -+/** -+ * This union represents the bit fields in the Device EP 0 Transfer -+ * Size Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union deptsiz0_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer size */ -+ unsigned xfersize:7; -+ /** Reserved */ -+ unsigned reserved7_18:12; -+ /** Packet Count */ -+ unsigned pktcnt:2; -+ /** Reserved */ -+ unsigned reserved21_28:8; -+ /**Setup Packet Count (DOEPTSIZ0 Only) */ -+ unsigned supcnt:2; -+ unsigned reserved31; -+ } b; -+} deptsiz0_data_t; -+ -+///////////////////////////////////////////////// -+// DMA Descriptor Specific Structures -+// -+ -+/** Buffer status definitions */ -+ -+#define BS_HOST_READY 0x0 -+#define BS_DMA_BUSY 0x1 -+#define BS_DMA_DONE 0x2 -+#define BS_HOST_BUSY 0x3 -+ -+/** Receive/Transmit status definitions */ -+ -+#define RTS_SUCCESS 0x0 -+#define RTS_BUFFLUSH 0x1 -+#define RTS_RESERVED 0x2 -+#define RTS_BUFERR 0x3 -+ -+/** -+ * This union represents the bit fields in the DMA Descriptor -+ * status quadlet. Read the quadlet into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and -+ * <i>b_iso_in</i> elements. -+ */ -+typedef union dev_dma_desc_sts { -+ /** raw register data */ -+ uint32_t d32; -+ /** quadlet bits */ -+ struct { -+ /** Received number of bytes */ -+ unsigned bytes:16; -+ /** NAK bit - only for OUT EPs */ -+ unsigned nak:1; -+ unsigned reserved17_22:6; -+ /** Multiple Transfer - only for OUT EPs */ -+ unsigned mtrf:1; -+ /** Setup Packet received - only for OUT EPs */ -+ unsigned sr:1; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** Short Packet */ -+ unsigned sp:1; -+ /** Last */ -+ unsigned l:1; -+ /** Receive Status */ -+ unsigned sts:2; -+ /** Buffer Status */ -+ unsigned bs:2; -+ } b; -+ -+//#ifdef DWC_EN_ISOC -+ /** iso out quadlet bits */ -+ struct { -+ /** Received number of bytes */ -+ unsigned rxbytes:11; -+ -+ unsigned reserved11:1; -+ /** Frame Number */ -+ unsigned framenum:11; -+ /** Received ISO Data PID */ -+ unsigned pid:2; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** Short Packet */ -+ unsigned sp:1; -+ /** Last */ -+ unsigned l:1; -+ /** Receive Status */ -+ unsigned rxsts:2; -+ /** Buffer Status */ -+ unsigned bs:2; -+ } b_iso_out; -+ -+ /** iso in quadlet bits */ -+ struct { -+ /** Transmited number of bytes */ -+ unsigned txbytes:12; -+ /** Frame Number */ -+ unsigned framenum:11; -+ /** Transmited ISO Data PID */ -+ unsigned pid:2; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** Short Packet */ -+ unsigned sp:1; -+ /** Last */ -+ unsigned l:1; -+ /** Transmit Status */ -+ unsigned txsts:2; -+ /** Buffer Status */ -+ unsigned bs:2; -+ } b_iso_in; -+//#endif /* DWC_EN_ISOC */ -+} dev_dma_desc_sts_t; -+ -+/** -+ * DMA Descriptor structure -+ * -+ * DMA Descriptor structure contains two quadlets: -+ * Status quadlet and Data buffer pointer. -+ */ -+typedef struct dwc_otg_dev_dma_desc { -+ /** DMA Descriptor status quadlet */ -+ dev_dma_desc_sts_t status; -+ /** DMA Descriptor data buffer pointer */ -+ uint32_t buf; -+} dwc_otg_dev_dma_desc_t; -+ -+/** -+ * The dwc_otg_dev_if structure contains information needed to manage -+ * the DWC_otg controller acting in device mode. It represents the -+ * programming view of the device-specific aspects of the controller. -+ */ -+typedef struct dwc_otg_dev_if { -+ /** Pointer to device Global registers. -+ * Device Global Registers starting at offset 800h -+ */ -+ dwc_otg_device_global_regs_t *dev_global_regs; -+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 -+ -+ /** -+ * Device Logical IN Endpoint-Specific Registers 900h-AFCh -+ */ -+ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; -+#define DWC_DEV_IN_EP_REG_OFFSET 0x900 -+#define DWC_EP_REG_OFFSET 0x20 -+ -+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ -+ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; -+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 -+ -+ /* Device configuration information */ -+ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ -+ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ -+ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ -+ -+ /** Size of periodic FIFOs (Bytes) */ -+ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; -+ -+ /** Size of Tx FIFOs (Bytes) */ -+ uint16_t tx_fifo_size[MAX_TX_FIFOS]; -+ -+ /** Thresholding enable flags and length varaiables **/ -+ uint16_t rx_thr_en; -+ uint16_t iso_tx_thr_en; -+ uint16_t non_iso_tx_thr_en; -+ -+ uint16_t rx_thr_length; -+ uint16_t tx_thr_length; -+ -+ /** -+ * Pointers to the DMA Descriptors for EP0 Control -+ * transfers (virtual and physical) -+ */ -+ -+ /** 2 descriptors for SETUP packets */ -+ dwc_dma_t dma_setup_desc_addr[2]; -+ dwc_otg_dev_dma_desc_t *setup_desc_addr[2]; -+ -+ /** Pointer to Descriptor with latest SETUP packet */ -+ dwc_otg_dev_dma_desc_t *psetup; -+ -+ /** Index of current SETUP handler descriptor */ -+ uint32_t setup_desc_index; -+ -+ /** Descriptor for Data In or Status In phases */ -+ dwc_dma_t dma_in_desc_addr; -+ dwc_otg_dev_dma_desc_t *in_desc_addr; -+ -+ /** Descriptor for Data Out or Status Out phases */ -+ dwc_dma_t dma_out_desc_addr; -+ dwc_otg_dev_dma_desc_t *out_desc_addr; -+ -+ /** Setup Packet Detected - if set clear NAK when queueing */ -+ uint32_t spd; -+ /** Isoc ep pointer on which incomplete happens */ -+ void *isoc_ep; -+ -+} dwc_otg_dev_if_t; -+ -+///////////////////////////////////////////////// -+// Host Mode Register Structures -+// -+/** -+ * The Host Global Registers structure defines the size and relative -+ * field offsets for the Host Mode Global Registers. Host Global -+ * Registers offsets 400h-7FFh. -+*/ -+typedef struct dwc_otg_host_global_regs { -+ /** Host Configuration Register. <i>Offset: 400h</i> */ -+ volatile uint32_t hcfg; -+ /** Host Frame Interval Register. <i>Offset: 404h</i> */ -+ volatile uint32_t hfir; -+ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */ -+ volatile uint32_t hfnum; -+ /** Reserved. <i>Offset: 40Ch</i> */ -+ uint32_t reserved40C; -+ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */ -+ volatile uint32_t hptxsts; -+ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */ -+ volatile uint32_t haint; -+ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */ -+ volatile uint32_t haintmsk; -+ /** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */ -+ volatile uint32_t hflbaddr; -+} dwc_otg_host_global_regs_t; -+ -+/** -+ * This union represents the bit fields in the Host Configuration Register. -+ * Read the register into the <i>d32</i> member then set/clear the bits using -+ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register. -+ */ -+typedef union hcfg_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** FS/LS Phy Clock Select */ -+ unsigned fslspclksel:2; -+#define DWC_HCFG_30_60_MHZ 0 -+#define DWC_HCFG_48_MHZ 1 -+#define DWC_HCFG_6_MHZ 2 -+ -+ /** FS/LS Only Support */ -+ unsigned fslssupp:1; -+ unsigned reserved3_6:4; -+ /** Enable 32-KHz Suspend Mode */ -+ unsigned ena32khzs:1; -+ /** Resume Validation Periiod */ -+ unsigned resvalid:8; -+ unsigned reserved16_22:7; -+ /** Enable Scatter/gather DMA in Host mode */ -+ unsigned descdma:1; -+ /** Frame List Entries */ -+ unsigned frlisten:2; -+ /** Enable Periodic Scheduling */ -+ unsigned perschedena:1; -+ unsigned reserved27_30:4; -+ unsigned modechtimen:1; -+ } b; -+} hcfg_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Frame Remaing/Number -+ * Register. -+ */ -+typedef union hfir_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned frint:16; -+ unsigned hfirrldctrl:1; -+ unsigned reserved:15; -+ } b; -+} hfir_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Frame Remaing/Number -+ * Register. -+ */ -+typedef union hfnum_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned frnum:16; -+#define DWC_HFNUM_MAX_FRNUM 0x3FFF -+ unsigned frrem:16; -+ } b; -+} hfnum_data_t; -+ -+typedef union hptxsts_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned ptxfspcavail:16; -+ unsigned ptxqspcavail:8; -+ /** Top of the Periodic Transmit Request Queue -+ * - bit 24 - Terminate (last entry for the selected channel) -+ * - bits 26:25 - Token Type -+ * - 2'b00 - Zero length -+ * - 2'b01 - Ping -+ * - 2'b10 - Disable -+ * - bits 30:27 - Channel Number -+ * - bit 31 - Odd/even microframe -+ */ -+ unsigned ptxqtop_terminate:1; -+ unsigned ptxqtop_token:2; -+ unsigned ptxqtop_chnum:4; -+ unsigned ptxqtop_odd:1; -+ } b; -+} hptxsts_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Port Control and Status -+ * Register. Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the -+ * hprt0 register. -+ */ -+typedef union hprt0_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned prtconnsts:1; -+ unsigned prtconndet:1; -+ unsigned prtena:1; -+ unsigned prtenchng:1; -+ unsigned prtovrcurract:1; -+ unsigned prtovrcurrchng:1; -+ unsigned prtres:1; -+ unsigned prtsusp:1; -+ unsigned prtrst:1; -+ unsigned reserved9:1; -+ unsigned prtlnsts:2; -+ unsigned prtpwr:1; -+ unsigned prttstctl:4; -+ unsigned prtspd:2; -+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 -+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 -+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 -+ unsigned reserved19_31:13; -+ } b; -+} hprt0_data_t; -+ -+/** -+ * This union represents the bit fields in the Host All Interrupt -+ * Register. -+ */ -+typedef union haint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned ch0:1; -+ unsigned ch1:1; -+ unsigned ch2:1; -+ unsigned ch3:1; -+ unsigned ch4:1; -+ unsigned ch5:1; -+ unsigned ch6:1; -+ unsigned ch7:1; -+ unsigned ch8:1; -+ unsigned ch9:1; -+ unsigned ch10:1; -+ unsigned ch11:1; -+ unsigned ch12:1; -+ unsigned ch13:1; -+ unsigned ch14:1; -+ unsigned ch15:1; -+ unsigned reserved:16; -+ } b; -+ -+ struct { -+ unsigned chint:16; -+ unsigned reserved:16; -+ } b2; -+} haint_data_t; -+ -+/** -+ * This union represents the bit fields in the Host All Interrupt -+ * Register. -+ */ -+typedef union haintmsk_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned ch0:1; -+ unsigned ch1:1; -+ unsigned ch2:1; -+ unsigned ch3:1; -+ unsigned ch4:1; -+ unsigned ch5:1; -+ unsigned ch6:1; -+ unsigned ch7:1; -+ unsigned ch8:1; -+ unsigned ch9:1; -+ unsigned ch10:1; -+ unsigned ch11:1; -+ unsigned ch12:1; -+ unsigned ch13:1; -+ unsigned ch14:1; -+ unsigned ch15:1; -+ unsigned reserved:16; -+ } b; -+ -+ struct { -+ unsigned chint:16; -+ unsigned reserved:16; -+ } b2; -+} haintmsk_data_t; -+ -+/** -+ * Host Channel Specific Registers. <i>500h-5FCh</i> -+ */ -+typedef struct dwc_otg_hc_regs { -+ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */ -+ volatile uint32_t hcchar; -+ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */ -+ volatile uint32_t hcsplt; -+ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */ -+ volatile uint32_t hcint; -+ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */ -+ volatile uint32_t hcintmsk; -+ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */ -+ volatile uint32_t hctsiz; -+ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */ -+ volatile uint32_t hcdma; -+ volatile uint32_t reserved; -+ /** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */ -+ volatile uint32_t hcdmab; -+} dwc_otg_hc_regs_t; -+ -+/** -+ * This union represents the bit fields in the Host Channel Characteristics -+ * Register. Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the -+ * hcchar register. -+ */ -+typedef union hcchar_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Maximum packet size in bytes */ -+ unsigned mps:11; -+ -+ /** Endpoint number */ -+ unsigned epnum:4; -+ -+ /** 0: OUT, 1: IN */ -+ unsigned epdir:1; -+ -+ unsigned reserved:1; -+ -+ /** 0: Full/high speed device, 1: Low speed device */ -+ unsigned lspddev:1; -+ -+ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ -+ unsigned eptype:2; -+ -+ /** Packets per frame for periodic transfers. 0 is reserved. */ -+ unsigned multicnt:2; -+ -+ /** Device address */ -+ unsigned devaddr:7; -+ -+ /** -+ * Frame to transmit periodic transaction. -+ * 0: even, 1: odd -+ */ -+ unsigned oddfrm:1; -+ -+ /** Channel disable */ -+ unsigned chdis:1; -+ -+ /** Channel enable */ -+ unsigned chen:1; -+ } b; -+} hcchar_data_t; -+ -+typedef union hcsplt_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Port Address */ -+ unsigned prtaddr:7; -+ -+ /** Hub Address */ -+ unsigned hubaddr:7; -+ -+ /** Transaction Position */ -+ unsigned xactpos:2; -+#define DWC_HCSPLIT_XACTPOS_MID 0 -+#define DWC_HCSPLIT_XACTPOS_END 1 -+#define DWC_HCSPLIT_XACTPOS_BEGIN 2 -+#define DWC_HCSPLIT_XACTPOS_ALL 3 -+ -+ /** Do Complete Split */ -+ unsigned compsplt:1; -+ -+ /** Reserved */ -+ unsigned reserved:14; -+ -+ /** Split Enble */ -+ unsigned spltena:1; -+ } b; -+} hcsplt_data_t; -+ -+/** -+ * This union represents the bit fields in the Host All Interrupt -+ * Register. -+ */ -+typedef union hcint_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** Transfer Complete */ -+ unsigned xfercomp:1; -+ /** Channel Halted */ -+ unsigned chhltd:1; -+ /** AHB Error */ -+ unsigned ahberr:1; -+ /** STALL Response Received */ -+ unsigned stall:1; -+ /** NAK Response Received */ -+ unsigned nak:1; -+ /** ACK Response Received */ -+ unsigned ack:1; -+ /** NYET Response Received */ -+ unsigned nyet:1; -+ /** Transaction Err */ -+ unsigned xacterr:1; -+ /** Babble Error */ -+ unsigned bblerr:1; -+ /** Frame Overrun */ -+ unsigned frmovrun:1; -+ /** Data Toggle Error */ -+ unsigned datatglerr:1; -+ /** Buffer Not Available (only for DDMA mode) */ -+ unsigned bna:1; -+ /** Exessive transaction error (only for DDMA mode) */ -+ unsigned xcs_xact:1; -+ /** Frame List Rollover interrupt */ -+ unsigned frm_list_roll:1; -+ /** Reserved */ -+ unsigned reserved14_31:18; -+ } b; -+} hcint_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Channel Interrupt Mask -+ * Register. Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the -+ * hcintmsk register. -+ */ -+typedef union hcintmsk_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ unsigned xfercompl:1; -+ unsigned chhltd:1; -+ unsigned ahberr:1; -+ unsigned stall:1; -+ unsigned nak:1; -+ unsigned ack:1; -+ unsigned nyet:1; -+ unsigned xacterr:1; -+ unsigned bblerr:1; -+ unsigned frmovrun:1; -+ unsigned datatglerr:1; -+ unsigned bna:1; -+ unsigned xcs_xact:1; -+ unsigned frm_list_roll:1; -+ unsigned reserved14_31:18; -+ } b; -+} hcintmsk_data_t; -+ -+/** -+ * This union represents the bit fields in the Host Channel Transfer Size -+ * Register. Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the -+ * hcchar register. -+ */ -+ -+typedef union hctsiz_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Total transfer size in bytes */ -+ unsigned xfersize:19; -+ -+ /** Data packets to transfer */ -+ unsigned pktcnt:10; -+ -+ /** -+ * Packet ID for next data packet -+ * 0: DATA0 -+ * 1: DATA2 -+ * 2: DATA1 -+ * 3: MDATA (non-Control), SETUP (Control) -+ */ -+ unsigned pid:2; -+#define DWC_HCTSIZ_DATA0 0 -+#define DWC_HCTSIZ_DATA1 2 -+#define DWC_HCTSIZ_DATA2 1 -+#define DWC_HCTSIZ_MDATA 3 -+#define DWC_HCTSIZ_SETUP 3 -+ -+ /** Do PING protocol when 1 */ -+ unsigned dopng:1; -+ } b; -+ -+ /** register bits */ -+ struct { -+ /** Scheduling information */ -+ unsigned schinfo:8; -+ -+ /** Number of transfer descriptors. -+ * Max value: -+ * 64 in general, -+ * 256 only for HS isochronous endpoint. -+ */ -+ unsigned ntd:8; -+ -+ /** Data packets to transfer */ -+ unsigned reserved16_28:13; -+ -+ /** -+ * Packet ID for next data packet -+ * 0: DATA0 -+ * 1: DATA2 -+ * 2: DATA1 -+ * 3: MDATA (non-Control) -+ */ -+ unsigned pid:2; -+ -+ /** Do PING protocol when 1 */ -+ unsigned dopng:1; -+ } b_ddma; -+} hctsiz_data_t; -+ -+/** -+ * This union represents the bit fields in the Host DMA Address -+ * Register used in Descriptor DMA mode. -+ */ -+typedef union hcdma_data { -+ /** raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ unsigned reserved0_2:3; -+ /** Current Transfer Descriptor. Not used for ISOC */ -+ unsigned ctd:8; -+ /** Start Address of Descriptor List */ -+ unsigned dma_addr:21; -+ } b; -+} hcdma_data_t; -+ -+/** -+ * This union represents the bit fields in the DMA Descriptor -+ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union host_dma_desc_sts { -+ /** raw register data */ -+ uint32_t d32; -+ /** quadlet bits */ -+ -+ /* for non-isochronous */ -+ struct { -+ /** Number of bytes */ -+ unsigned n_bytes:17; -+ /** QTD offset to jump when Short Packet received - only for IN EPs */ -+ unsigned qtd_offset:6; -+ /** -+ * Set to request the core to jump to alternate QTD if -+ * Short Packet received - only for IN EPs -+ */ -+ unsigned a_qtd:1; -+ /** -+ * Setup Packet bit. When set indicates that buffer contains -+ * setup packet. -+ */ -+ unsigned sup:1; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ /** End of List */ -+ unsigned eol:1; -+ unsigned reserved27:1; -+ /** Rx/Tx Status */ -+ unsigned sts:2; -+#define DMA_DESC_STS_PKTERR 1 -+ unsigned reserved30:1; -+ /** Active Bit */ -+ unsigned a:1; -+ } b; -+ /* for isochronous */ -+ struct { -+ /** Number of bytes */ -+ unsigned n_bytes:12; -+ unsigned reserved12_24:13; -+ /** Interrupt On Complete */ -+ unsigned ioc:1; -+ unsigned reserved26_27:2; -+ /** Rx/Tx Status */ -+ unsigned sts:2; -+ unsigned reserved30:1; -+ /** Active Bit */ -+ unsigned a:1; -+ } b_isoc; -+} host_dma_desc_sts_t; -+ -+#define MAX_DMA_DESC_SIZE 131071 -+#define MAX_DMA_DESC_NUM_GENERIC 64 -+#define MAX_DMA_DESC_NUM_HS_ISOC 256 -+#define MAX_FRLIST_EN_NUM 64 -+/** -+ * Host-mode DMA Descriptor structure -+ * -+ * DMA Descriptor structure contains two quadlets: -+ * Status quadlet and Data buffer pointer. -+ */ -+typedef struct dwc_otg_host_dma_desc { -+ /** DMA Descriptor status quadlet */ -+ host_dma_desc_sts_t status; -+ /** DMA Descriptor data buffer pointer */ -+ uint32_t buf; -+} dwc_otg_host_dma_desc_t; -+ -+/** OTG Host Interface Structure. -+ * -+ * The OTG Host Interface Structure structure contains information -+ * needed to manage the DWC_otg controller acting in host mode. It -+ * represents the programming view of the host-specific aspects of the -+ * controller. -+ */ -+typedef struct dwc_otg_host_if { -+ /** Host Global Registers starting at offset 400h.*/ -+ dwc_otg_host_global_regs_t *host_global_regs; -+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 -+ -+ /** Host Port 0 Control and Status Register */ -+ volatile uint32_t *hprt0; -+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 -+ -+ /** Host Channel Specific Registers at offsets 500h-5FCh. */ -+ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; -+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 -+#define DWC_OTG_CHAN_REGS_OFFSET 0x20 -+ -+ /* Host configuration information */ -+ /** Number of Host Channels (range: 1-16) */ -+ uint8_t num_host_channels; -+ /** Periodic EPs supported (0: no, 1: yes) */ -+ uint8_t perio_eps_supported; -+ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ -+ uint16_t perio_tx_fifo_size; -+ -+} dwc_otg_host_if_t; -+ -+/** -+ * This union represents the bit fields in the Power and Clock Gating Control -+ * Register. Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union pcgcctl_data { -+ /** raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** Stop Pclk */ -+ unsigned stoppclk:1; -+ /** Gate Hclk */ -+ unsigned gatehclk:1; -+ /** Power Clamp */ -+ unsigned pwrclmp:1; -+ /** Reset Power Down Modules */ -+ unsigned rstpdwnmodule:1; -+ /** Reserved */ -+ unsigned reserved:1; -+ /** Enable Sleep Clock Gating (Enbl_L1Gating) */ -+ unsigned enbl_sleep_gating:1; -+ /** PHY In Sleep (PhySleep) */ -+ unsigned phy_in_sleep:1; -+ /** Deep Sleep*/ -+ unsigned deep_sleep:1; -+ unsigned resetaftsusp:1; -+ unsigned restoremode:1; -+ unsigned enbl_extnd_hiber:1; -+ unsigned extnd_hiber_pwrclmp:1; -+ unsigned extnd_hiber_switch:1; -+ unsigned ess_reg_restored:1; -+ unsigned prt_clk_sel:2; -+ unsigned port_power:1; -+ unsigned max_xcvrselect:2; -+ unsigned max_termsel:1; -+ unsigned mac_dev_addr:7; -+ unsigned p2hd_dev_enum_spd:2; -+ unsigned p2hd_prt_spd:2; -+ unsigned if_dev_mode:1; -+ } b; -+} pcgcctl_data_t; -+ -+/** -+ * This union represents the bit fields in the Global Data FIFO Software -+ * Configuration Register. Read the register into the <i>d32</i> member then -+ * set/clear the bits using the <i>b</i>it elements. -+ */ -+typedef union gdfifocfg_data { -+ /* raw register data */ -+ uint32_t d32; -+ /** register bits */ -+ struct { -+ /** OTG Data FIFO depth */ -+ unsigned gdfifocfg:16; -+ /** Start address of EP info controller */ -+ unsigned epinfobase:16; -+ } b; -+} gdfifocfg_data_t; -+ -+/** -+ * This union represents the bit fields in the Global Power Down Register -+ * Register. Read the register into the <i>d32</i> member then set/clear the -+ * bits using the <i>b</i>it elements. -+ */ -+typedef union gpwrdn_data { -+ /* raw register data */ -+ uint32_t d32; -+ -+ /** register bits */ -+ struct { -+ /** PMU Interrupt Select */ -+ unsigned pmuintsel:1; -+ /** PMU Active */ -+ unsigned pmuactv:1; -+ /** Restore */ -+ unsigned restore:1; -+ /** Power Down Clamp */ -+ unsigned pwrdnclmp:1; -+ /** Power Down Reset */ -+ unsigned pwrdnrstn:1; -+ /** Power Down Switch */ -+ unsigned pwrdnswtch:1; -+ /** Disable VBUS */ -+ unsigned dis_vbus:1; -+ /** Line State Change */ -+ unsigned lnstschng:1; -+ /** Line state change mask */ -+ unsigned lnstchng_msk:1; -+ /** Reset Detected */ -+ unsigned rst_det:1; -+ /** Reset Detect mask */ -+ unsigned rst_det_msk:1; -+ /** Disconnect Detected */ -+ unsigned disconn_det:1; -+ /** Disconnect Detect mask */ -+ unsigned disconn_det_msk:1; -+ /** Connect Detected*/ -+ unsigned connect_det:1; -+ /** Connect Detected Mask*/ -+ unsigned connect_det_msk:1; -+ /** SRP Detected */ -+ unsigned srp_det:1; -+ /** SRP Detect mask */ -+ unsigned srp_det_msk:1; -+ /** Status Change Interrupt */ -+ unsigned sts_chngint:1; -+ /** Status Change Interrupt Mask */ -+ unsigned sts_chngint_msk:1; -+ /** Line State */ -+ unsigned linestate:2; -+ /** Indicates current mode(status of IDDIG signal) */ -+ unsigned idsts:1; -+ /** B Session Valid signal status*/ -+ unsigned bsessvld:1; -+ /** ADP Event Detected */ -+ unsigned adp_int:1; -+ /** Multi Valued ID pin */ -+ unsigned mult_val_id_bc:5; -+ /** Reserved 24_31 */ -+ unsigned reserved29_31:3; -+ } b; -+} gpwrdn_data_t; -+ -+#endif ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/Makefile -@@ -0,0 +1,16 @@ -+ -+PERL=/usr/bin/perl -+PL_TESTS=test_sysfs.pl test_mod_param.pl -+ -+.PHONY : test -+test : perl_tests -+ -+perl_tests : -+ @echo -+ @echo Running perl tests -+ @for test in $(PL_TESTS); do \ -+ if $(PERL) ./$$test ; then \ -+ echo "=======> $$test, PASSED" ; \ -+ else echo "=======> $$test, FAILED" ; \ -+ fi \ -+ done ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm -@@ -0,0 +1,337 @@ -+package dwc_otg_test; -+ -+use strict; -+use Exporter (); -+ -+use vars qw(@ISA @EXPORT -+$sysfsdir $paramdir $errors $params -+); -+ -+@ISA = qw(Exporter); -+ -+# -+# Globals -+# -+$sysfsdir = "/sys/devices/lm0"; -+$paramdir = "/sys/module/dwc_otg"; -+$errors = 0; -+ -+$params = [ -+ { -+ NAME => "otg_cap", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 2 -+ }, -+ { -+ NAME => "dma_enable", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "dma_burst_size", -+ DEFAULT => 32, -+ ENUM => [1, 4, 8, 16, 32, 64, 128, 256], -+ LOW => 1, -+ HIGH => 256 -+ }, -+ { -+ NAME => "host_speed", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "host_support_fs_ls_low_power", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "host_ls_low_power_phy_clk", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "dev_speed", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "enable_dynamic_fifo", -+ DEFAULT => 1, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ { -+ NAME => "data_fifo_size", -+ DEFAULT => 8192, -+ ENUM => [], -+ LOW => 32, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "dev_rx_fifo_size", -+ DEFAULT => 1064, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "dev_nperio_tx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_1", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_2", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_3", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_4", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_5", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_6", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_7", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_8", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_9", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_10", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_11", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_12", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_13", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_14", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "dev_perio_tx_fifo_size_15", -+ DEFAULT => 256, -+ ENUM => [], -+ LOW => 4, -+ HIGH => 768 -+ }, -+ { -+ NAME => "host_rx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "host_nperio_tx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "host_perio_tx_fifo_size", -+ DEFAULT => 1024, -+ ENUM => [], -+ LOW => 16, -+ HIGH => 32768 -+ }, -+ { -+ NAME => "max_transfer_size", -+ DEFAULT => 65535, -+ ENUM => [], -+ LOW => 2047, -+ HIGH => 65535 -+ }, -+ { -+ NAME => "max_packet_count", -+ DEFAULT => 511, -+ ENUM => [], -+ LOW => 15, -+ HIGH => 511 -+ }, -+ { -+ NAME => "host_channels", -+ DEFAULT => 12, -+ ENUM => [], -+ LOW => 1, -+ HIGH => 16 -+ }, -+ { -+ NAME => "dev_endpoints", -+ DEFAULT => 6, -+ ENUM => [], -+ LOW => 1, -+ HIGH => 15 -+ }, -+ { -+ NAME => "phy_type", -+ DEFAULT => 1, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 2 -+ }, -+ { -+ NAME => "phy_utmi_width", -+ DEFAULT => 16, -+ ENUM => [8, 16], -+ LOW => 8, -+ HIGH => 16 -+ }, -+ { -+ NAME => "phy_ulpi_ddr", -+ DEFAULT => 0, -+ ENUM => [], -+ LOW => 0, -+ HIGH => 1 -+ }, -+ ]; -+ -+ -+# -+# -+sub check_arch { -+ $_ = `uname -m`; -+ chomp; -+ unless (m/armv4tl/) { -+ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n"; -+ return 0; -+ } -+ return 1; -+} -+ -+# -+# -+sub load_module { -+ my $params = shift; -+ print "\nRemoving Module\n"; -+ system "rmmod dwc_otg"; -+ print "Loading Module\n"; -+ if ($params ne "") { -+ print "Module Parameters: $params\n"; -+ } -+ if (system("modprobe dwc_otg $params")) { -+ warn "Unable to load module\n"; -+ return 0; -+ } -+ return 1; -+} -+ -+# -+# -+sub test_status { -+ my $arg = shift; -+ -+ print "\n"; -+ -+ if (defined $arg) { -+ warn "WARNING: $arg\n"; -+ } -+ -+ if ($errors > 0) { -+ warn "TEST FAILED with $errors errors\n"; -+ return 0; -+ } else { -+ print "TEST PASSED\n"; -+ return 0 if (defined $arg); -+ } -+ return 1; -+} -+ -+# -+# -+@EXPORT = qw( -+$sysfsdir -+$paramdir -+$params -+$errors -+check_arch -+load_module -+test_status -+); -+ -+1; ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl -@@ -0,0 +1,133 @@ -+#!/usr/bin/perl -w -+# -+# Run this program on the integrator. -+# -+# - Tests module parameter default values. -+# - Tests setting of valid module parameter values via modprobe. -+# - Tests invalid module parameter values. -+# ----------------------------------------------------------------------------- -+use strict; -+use dwc_otg_test; -+ -+check_arch() or die; -+ -+# -+# -+sub test { -+ my ($param,$expected) = @_; -+ my $value = get($param); -+ -+ if ($value == $expected) { -+ print "$param = $value, okay\n"; -+ } -+ -+ else { -+ warn "ERROR: value of $param != $expected, $value\n"; -+ $errors ++; -+ } -+} -+ -+# -+# -+sub get { -+ my $param = shift; -+ my $tmp = `cat $paramdir/$param`; -+ chomp $tmp; -+ return $tmp; -+} -+ -+# -+# -+sub test_main { -+ -+ print "\nTesting Module Parameters\n"; -+ -+ load_module("") or die; -+ -+ # Test initial values -+ print "\nTesting Default Values\n"; -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ -+ # Test low value -+ print "\nTesting Low Value\n"; -+ my $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} "; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{LOW}); -+ } -+ -+ # Test high value -+ print "\nTesting High Value\n"; -+ $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} "; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{HIGH}); -+ } -+ -+ # Test Enum -+ print "\nTesting Enumerated\n"; -+ foreach (@{$params}) { -+ if (defined $_->{ENUM}) { -+ my $value; -+ foreach $value (@{$_->{ENUM}}) { -+ $cmd_params = "$_->{NAME}=$value"; -+ load_module($cmd_params) or die; -+ test ($_->{NAME}, $value); -+ } -+ } -+ } -+ -+ # Test Invalid Values -+ print "\nTesting Invalid Values\n"; -+ $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ -+ $cmd_params = ""; -+ foreach (@{$params}) { -+ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1; -+ } -+ load_module($cmd_params) or die; -+ -+ foreach (@{$params}) { -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ -+ print "\nTesting Enumerated\n"; -+ foreach (@{$params}) { -+ if (defined $_->{ENUM}) { -+ my $value; -+ foreach $value (@{$_->{ENUM}}) { -+ $value = $value + 1; -+ $cmd_params = "$_->{NAME}=$value"; -+ load_module($cmd_params) or die; -+ test ($_->{NAME}, $_->{DEFAULT}); -+ $value = $value - 2; -+ $cmd_params = "$_->{NAME}=$value"; -+ load_module($cmd_params) or die; -+ test ($_->{NAME}, $_->{DEFAULT}); -+ } -+ } -+ } -+ -+ test_status() or die; -+} -+ -+test_main(); -+0; ---- /dev/null -+++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl -@@ -0,0 +1,193 @@ -+#!/usr/bin/perl -w -+# -+# Run this program on the integrator -+# - Tests select sysfs attributes. -+# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc. -+# ----------------------------------------------------------------------------- -+use strict; -+use dwc_otg_test; -+ -+check_arch() or die; -+ -+# -+# -+sub test { -+ my ($attr,$expected) = @_; -+ my $string = get($attr); -+ -+ if ($string eq $expected) { -+ printf("$attr = $string, okay\n"); -+ } -+ else { -+ warn "ERROR: value of $attr != $expected, $string\n"; -+ $errors ++; -+ } -+} -+ -+# -+# -+sub set { -+ my ($reg, $value) = @_; -+ system "echo $value > $sysfsdir/$reg"; -+} -+ -+# -+# -+sub get { -+ my $attr = shift; -+ my $string = `cat $sysfsdir/$attr`; -+ chomp $string; -+ if ($string =~ m/\s\=\s/) { -+ my $tmp; -+ ($tmp, $string) = split /\s=\s/, $string; -+ } -+ return $string; -+} -+ -+# -+# -+sub test_main { -+ print("\nTesting Sysfs Attributes\n"); -+ -+ load_module("") or die; -+ -+ # Test initial values of regoffset/regvalue/guid/gsnpsid -+ print("\nTesting Default Values\n"); -+ -+ test("regoffset", "0xffffffff"); -+ test("regvalue", "invalid offset"); -+ test("guid", "0x12345678"); # this will fail if it has been changed -+ test("gsnpsid", "0x4f54200a"); -+ -+ # Test operation of regoffset/regvalue -+ print("\nTesting regoffset\n"); -+ set('regoffset', '5a5a5a5a'); -+ test("regoffset", "0xffffffff"); -+ -+ set('regoffset', '0'); -+ test("regoffset", "0x00000000"); -+ -+ set('regoffset', '40000'); -+ test("regoffset", "0x00000000"); -+ -+ set('regoffset', '3ffff'); -+ test("regoffset", "0x0003ffff"); -+ -+ set('regoffset', '1'); -+ test("regoffset", "0x00000001"); -+ -+ print("\nTesting regvalue\n"); -+ set('regoffset', '3c'); -+ test("regvalue", "0x12345678"); -+ set('regvalue', '5a5a5a5a'); -+ test("regvalue", "0x5a5a5a5a"); -+ set('regvalue','a5a5a5a5'); -+ test("regvalue", "0xa5a5a5a5"); -+ set('guid','12345678'); -+ -+ # Test HNP Capable -+ print("\nTesting HNP Capable bit\n"); -+ set('hnpcapable', '1'); -+ test("hnpcapable", "0x1"); -+ set('hnpcapable','0'); -+ test("hnpcapable", "0x0"); -+ -+ set('regoffset','0c'); -+ -+ my $old = get('gusbcfg'); -+ print("setting hnpcapable\n"); -+ set('hnpcapable', '1'); -+ test("hnpcapable", "0x1"); -+ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9))); -+ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9))); -+ -+ $old = get('gusbcfg'); -+ print("clearing hnpcapable\n"); -+ set('hnpcapable', '0'); -+ test("hnpcapable", "0x0"); -+ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9))); -+ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9))); -+ -+ # Test SRP Capable -+ print("\nTesting SRP Capable bit\n"); -+ set('srpcapable', '1'); -+ test("srpcapable", "0x1"); -+ set('srpcapable','0'); -+ test("srpcapable", "0x0"); -+ -+ set('regoffset','0c'); -+ -+ $old = get('gusbcfg'); -+ print("setting srpcapable\n"); -+ set('srpcapable', '1'); -+ test("srpcapable", "0x1"); -+ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8))); -+ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8))); -+ -+ $old = get('gusbcfg'); -+ print("clearing srpcapable\n"); -+ set('srpcapable', '0'); -+ test("srpcapable", "0x0"); -+ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8))); -+ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8))); -+ -+ # Test GGPIO -+ print("\nTesting GGPIO\n"); -+ set('ggpio','5a5a5a5a'); -+ test('ggpio','0x5a5a0000'); -+ set('ggpio','a5a5a5a5'); -+ test('ggpio','0xa5a50000'); -+ set('ggpio','11110000'); -+ test('ggpio','0x11110000'); -+ set('ggpio','00001111'); -+ test('ggpio','0x00000000'); -+ -+ # Test DEVSPEED -+ print("\nTesting DEVSPEED\n"); -+ set('regoffset','800'); -+ $old = get('regvalue'); -+ set('devspeed','0'); -+ test('devspeed','0x0'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); -+ set('devspeed','1'); -+ test('devspeed','0x1'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); -+ set('devspeed','2'); -+ test('devspeed','0x2'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2)); -+ set('devspeed','3'); -+ test('devspeed','0x3'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3)); -+ set('devspeed','4'); -+ test('devspeed','0x0'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3))); -+ set('devspeed','5'); -+ test('devspeed','0x1'); -+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1)); -+ -+ -+ # mode Returns the current mode:0 for device mode1 for host mode Read -+ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write -+ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write -+ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write -+ # bussuspend Suspend the USB bus. Read/Write -+ # busconnected Get the connection status of the bus Read -+ -+ # gotgctl Get or set the Core Control Status Register. Read/Write -+ ## gusbcfg Get or set the Core USB Configuration Register Read/Write -+ # grxfsiz Get or set the Receive FIFO Size Register Read/Write -+ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write -+ # gpvndctl Get or set the PHY Vendor Control Register Read/Write -+ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write -+ ## guid Get or set the value of the User ID Register Read/Write -+ ## gsnpsid Get the value of the Synopsys ID Regester Read -+ ## devspeed Get or set the device speed setting in the DCFG register Read/Write -+ # enumspeed Gets the device enumeration Speed. Read -+ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read -+ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write -+ -+ test_status("TEST NYI") or die; -+} -+ -+test_main(); -+0; |