aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch')
-rw-r--r--target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch60858
1 files changed, 0 insertions, 60858 deletions
diff --git a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
deleted file mode 100644
index 707e1a34a1..0000000000
--- a/target/linux/brcm2708/patches-4.9/950-0031-Add-dwc_otg-driver.patch
+++ /dev/null
@@ -1,60858 +0,0 @@
-From 65f57e56fcf9d40383718f0bcd9e6f95a34ca1aa Mon Sep 17 00:00:00 2001
-From: popcornmix <popcornmix@gmail.com>
-Date: Wed, 1 May 2013 19:46:17 +0100
-Subject: [PATCH] Add dwc_otg driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
-
-usb: dwc: fix lockdep false positive
-
-Signed-off-by: Kari Suvanto <karis79@gmail.com>
-
-usb: dwc: fix inconsistent lock state
-
-Signed-off-by: Kari Suvanto <karis79@gmail.com>
-
-Add FIQ patch to dwc_otg driver. Enable with dwc_otg.fiq_fix_enable=1. Should give about 10% more ARM performance.
-Thanks to Gordon and Costas
-
-Avoid dynamic memory allocation for channel lock in USB driver. Thanks ddv2005.
-
-Add NAK holdoff scheme. Enabled by default, disable with dwc_otg.nak_holdoff_enable=0. Thanks gsh
-
-Make sure we wait for the reset to finish
-
-dwc_otg: fix bug in dwc_otg_hcd.c resulting in silent kernel
- memory corruption, escalating to OOPS under high USB load.
-
-dwc_otg: Fix unsafe access of QTD during URB enqueue
-
-In dwc_otg_hcd_urb_enqueue during qtd creation, it was possible that the
-transaction could complete almost immediately after the qtd was assigned
-to a host channel during URB enqueue, which meant the qtd pointer was no
-longer valid having been completed and removed. Usually, this resulted in
-an OOPS during URB submission. By predetermining whether transactions
-need to be queued or not, this unsafe pointer access is avoided.
-
-This bug was only evident on the Pi model A where a device was attached
-that had no periodic endpoints (e.g. USB pendrive or some wlan devices).
-
-dwc_otg: Fix incorrect URB allocation error handling
-
-If the memory allocation for a dwc_otg_urb failed, the kernel would OOPS
-because for some reason a member of the *unallocated* struct was set to
-zero. Error handling changed to fail correctly.
-
-dwc_otg: fix potential use-after-free case in interrupt handler
-
-If a transaction had previously aborted, certain interrupts are
-enabled to track error counts and reset where necessary. On IN
-endpoints the host generates an ACK interrupt near-simultaneously
-with completion of transfer. In the case where this transfer had
-previously had an error, this results in a use-after-free on
-the QTD memory space with a 1-byte length being overwritten to
-0x00.
-
-dwc_otg: add handling of SPLIT transaction data toggle errors
-
-Previously a data toggle error on packets from a USB1.1 device behind
-a TT would result in the Pi locking up as the driver never handled
-the associated interrupt. Patch adds basic retry mechanism and
-interrupt acknowledgement to cater for either a chance toggle error or
-for devices that have a broken initial toggle state (FT8U232/FT232BM).
-
-dwc_otg: implement tasklet for returning URBs to usbcore hcd layer
-
-The dwc_otg driver interrupt handler for transfer completion will spend
-a very long time with interrupts disabled when a URB is completed -
-this is because usb_hcd_giveback_urb is called from within the handler
-which for a USB device driver with complicated processing (e.g. webcam)
-will take an exorbitant amount of time to complete. This results in
-missed completion interrupts for other USB packets which lead to them
-being dropped due to microframe overruns.
-
-This patch splits returning the URB to the usb hcd layer into a
-high-priority tasklet. This will have most benefit for isochronous IN
-transfers but will also have incidental benefit where multiple periodic
-devices are active at once.
-
-dwc_otg: fix NAK holdoff and allow on split transactions only
-
-This corrects a bug where if a single active non-periodic endpoint
-had at least one transaction in its qh, on frnum == MAX_FRNUM the qh
-would get skipped and never get queued again. This would result in
-a silent device until error detection (automatic or otherwise) would
-either reset the device or flush and requeue the URBs.
-
-Additionally the NAK holdoff was enabled for all transactions - this
-would potentially stall a HS endpoint for 1ms if a previous error state
-enabled this interrupt and the next response was a NAK. Fix so that
-only split transactions get held off.
-
-dwc_otg: Call usb_hcd_unlink_urb_from_ep with lock held in completion handler
-
-usb_hcd_unlink_urb_from_ep must be called with the HCD lock held. Calling it
-asynchronously in the tasklet was not safe (regression in
-c4564d4a1a0a9b10d4419e48239f5d99e88d2667).
-
-This change unlinks it from the endpoint prior to queueing it for handling in
-the tasklet, and also adds a check to ensure the urb is OK to be unlinked
-before doing so.
-
-NULL pointer dereference kernel oopses had been observed in usb_hcd_giveback_urb
-when a USB device was unplugged/replugged during data transfer. This effect
-was reproduced using automated USB port power control, hundreds of replug
-events were performed during active transfers to confirm that the problem was
-eliminated.
-
-USB fix using a FIQ to implement split transactions
-
-This commit adds a FIQ implementaion that schedules
-the split transactions using a FIQ so we don't get
-held off by the interrupt latency of Linux
-
-dwc_otg: fix device attributes and avoid kernel warnings on boot
-
-dcw_otg: avoid logging function that can cause panics
-
-See: https://github.com/raspberrypi/firmware/issues/21
-Thanks to cleverca22 for fix
-
-dwc_otg: mask correct interrupts after transaction error recovery
-
-The dwc_otg driver will unmask certain interrupts on a transaction
-that previously halted in the error state in order to reset the
-QTD error count. The various fine-grained interrupt handlers do not
-consider that other interrupts besides themselves were unmasked.
-
-By disabling the two other interrupts only ever enabled in DMA mode
-for this purpose, we can avoid unnecessary function calls in the
-IRQ handler. This will also prevent an unneccesary FIQ interrupt
-from being generated if the FIQ is enabled.
-
-dwc_otg: fiq: prevent FIQ thrash and incorrect state passing to IRQ
-
-In the case of a transaction to a device that had previously aborted
-due to an error, several interrupts are enabled to reset the error
-count when a device responds. This has the side-effect of making the
-FIQ thrash because the hardware will generate multiple instances of
-a NAK on an IN bulk/interrupt endpoint and multiple instances of ACK
-on an OUT bulk/interrupt endpoint. Make the FIQ mask and clear the
-associated interrupts.
-
-Additionally, on non-split transactions make sure that only unmasked
-interrupts are cleared. This caused a hard-to-trigger but serious
-race condition when you had the combination of an endpoint awaiting
-error recovery and a transaction completed on an endpoint - due to
-the sequencing and timing of interrupts generated by the dwc_otg core,
-it was possible to confuse the IRQ handler.
-
-Fix function tracing
-
-dwc_otg: whitespace cleanup in dwc_otg_urb_enqueue
-
-dwc_otg: prevent OOPSes during device disconnects
-
-The dwc_otg_urb_enqueue function is thread-unsafe. In particular the
-access of urb->hcpriv, usb_hcd_link_urb_to_ep, dwc_otg_urb->qtd and
-friends does not occur within a critical section and so if a device
-was unplugged during activity there was a high chance that the
-usbcore hub_thread would try to disable the endpoint with partially-
-formed entries in the URB queue. This would result in BUG() or null
-pointer dereferences.
-
-Fix so that access of urb->hcpriv, enqueuing to the hardware and
-adding to usbcore endpoint URB lists is contained within a single
-critical section.
-
-dwc_otg: prevent BUG() in TT allocation if hub address is > 16
-
-A fixed-size array is used to track TT allocation. This was
-previously set to 16 which caused a crash because
-dwc_otg_hcd_allocate_port would read past the end of the array.
-
-This was hit if a hub was plugged in which enumerated as addr > 16,
-due to previous device resets or unplugs.
-
-Also add #ifdef FIQ_DEBUG around hcd->hub_port_alloc[], which grows
-to a large size if 128 hub addresses are supported. This field is
-for debug only for tracking which frame an allocate happened in.
-
-dwc_otg: make channel halts with unknown state less damaging
-
-If the IRQ received a channel halt interrupt through the FIQ
-with no other bits set, the IRQ would not release the host
-channel and never complete the URB.
-
-Add catchall handling to treat as a transaction error and retry.
-
-dwc_otg: fiq_split: use TTs with more granularity
-
-This fixes certain issues with split transaction scheduling.
-
-- Isochronous multi-packet OUT transactions now hog the TT until
- they are completed - this prevents hubs aborting transactions
- if they get a periodic start-split out-of-order
-- Don't perform TT allocation on non-periodic endpoints - this
- allows simultaneous use of the TT's bulk/control and periodic
- transaction buffers
-
-This commit will mainly affect USB audio playback.
-
-dwc_otg: fix potential sleep while atomic during urb enqueue
-
-Fixes a regression introduced with eb1b482a. Kmalloc called from
-dwc_otg_hcd_qtd_add / dwc_otg_hcd_qtd_create did not always have
-the GPF_ATOMIC flag set. Force this flag when inside the larger
-critical section.
-
-dwc_otg: make fiq_split_enable imply fiq_fix_enable
-
-Failing to set up the FIQ correctly would result in
-"IRQ 32: nobody cared" errors in dmesg.
-
-dwc_otg: prevent crashes on host port disconnects
-
-Fix several issues resulting in crashes or inconsistent state
-if a Model A root port was disconnected.
-
-- Clean up queue heads properly in kill_urbs_in_qh_list by
- removing the empty QHs from the schedule lists
-- Set the halt status properly to prevent IRQ handlers from
- using freed memory
-- Add fiq_split related cleanup for saved registers
-- Make microframe scheduling reclaim host channels if
- active during a disconnect
-- Abort URBs with -ESHUTDOWN status response, informing
- device drivers so they respond in a more correct fashion
- and don't try to resubmit URBs
-- Prevent IRQ handlers from attempting to handle channel
- interrupts if the associated URB was dequeued (and the
- driver state was cleared)
-
-dwc_otg: prevent leaking URBs during enqueue
-
-A dwc_otg_urb would get leaked if the HCD enqueue function
-failed for any reason. Free the URB at the appropriate points.
-
-dwc_otg: Enable NAK holdoff for control split transactions
-
-Certain low-speed devices take a very long time to complete a
-data or status stage of a control transaction, producing NAK
-responses until they complete internal processing - the USB2.0
-spec limit is up to 500mS. This causes the same type of interrupt
-storm as seen with USB-serial dongles prior to c8edb238.
-
-In certain circumstances, usually while booting, this interrupt
-storm could cause SD card timeouts.
-
-dwc_otg: Fix for occasional lockup on boot when doing a USB reset
-
-dwc_otg: Don't issue traffic to LS devices in FS mode
-
-Issuing low-speed packets when the root port is in full-speed mode
-causes the root port to stop responding. Explicitly fail when
-enqueuing URBs to a LS endpoint on a FS bus.
-
-Fix ARM architecture issue with local_irq_restore()
-
-If local_fiq_enable() is called before a local_irq_restore(flags) where
-the flags variable has the F bit set, the FIQ will be erroneously disabled.
-
-Fixup arch_local_irq_restore to avoid trampling the F bit in CPSR.
-
-Also fix some of the hacks previously implemented for previous dwc_otg
-incarnations.
-
-dwc_otg: fiq_fsm: Base commit for driver rewrite
-
-This commit removes the previous FIQ fixes entirely and adds fiq_fsm.
-
-This rewrite features much more complete support for split transactions
-and takes into account several OTG hardware bugs. High-speed
-isochronous transactions are also capable of being performed by fiq_fsm.
-
-All driver options have been removed and replaced with:
- - dwc_otg.fiq_enable (bool)
- - dwc_otg.fiq_fsm_enable (bool)
- - dwc_otg.fiq_fsm_mask (bitmask)
- - dwc_otg.nak_holdoff (unsigned int)
-
-Defaults are specified such that fiq_fsm behaves similarly to the
-previously implemented FIQ fixes.
-
-fiq_fsm: Push error recovery into the FIQ when fiq_fsm is used
-
-If the transfer associated with a QTD failed due to a bus error, the HCD
-would retry the transfer up to 3 times (implementing the USB2.0
-three-strikes retry in software).
-
-Due to the masking mechanism used by fiq_fsm, it is only possible to pass
-a single interrupt through to the HCD per-transfer.
-
-In this instance host channels would fall off the radar because the error
-reset would function, but the subsequent channel halt would be lost.
-
-Push the error count reset into the FIQ handler.
-
-fiq_fsm: Implement timeout mechanism
-
-For full-speed endpoints with a large packet size, interrupt latency
-runs the risk of the FIQ starting a transaction too late in a full-speed
-frame. If the device is still transmitting data when EOF2 for the
-downstream frame occurs, the hub will disable the port. This change is
-not reflected in the hub status endpoint and the device becomes
-unresponsive.
-
-Prevent high-bandwidth transactions from being started too late in a
-frame. The mechanism is not guaranteed: a combination of bit stuffing
-and hub latency may still result in a device overrunning.
-
-fiq_fsm: fix bounce buffer utilisation for Isochronous OUT
-
-Multi-packet isochronous OUT transactions were subject to a few bounday
-bugs. Fix them.
-
-Audio playback is now much more robust: however, an issue stands with
-devices that have adaptive sinks - ALSA plays samples too fast.
-
-dwc_otg: Return full-speed frame numbers in HS mode
-
-The frame counter increments on every *microframe* in high-speed mode.
-Most device drivers expect this number to be in full-speed frames - this
-caused considerable confusion to e.g. snd_usb_audio which uses the
-frame counter to estimate the number of samples played.
-
-fiq_fsm: save PID on completion of interrupt OUT transfers
-
-Also add edge case handling for interrupt transports.
-
-Note that for periodic split IN, data toggles are unimplemented in the
-OTG host hardware - it unconditionally accepts any PID.
-
-fiq_fsm: add missing case for fiq_fsm_tt_in_use()
-
-Certain combinations of bitrate and endpoint activity could
-result in a periodic transaction erroneously getting started
-while the previous Isochronous OUT was still active.
-
-fiq_fsm: clear hcintmsk for aborted transactions
-
-Prevents the FIQ from erroneously handling interrupts
-on a timed out channel.
-
-fiq_fsm: enable by default
-
-fiq_fsm: fix dequeues for non-periodic split transactions
-
-If a dequeue happened between the SSPLIT and CSPLIT phases of the
-transaction, the HCD would never receive an interrupt.
-
-fiq_fsm: Disable by default
-
-fiq_fsm: Handle HC babble errors
-
-The HCTSIZ transfer size field raises a babble interrupt if
-the counter wraps. Handle the resulting interrupt in this case.
-
-dwc_otg: fix interrupt registration for fiq_enable=0
-
-Additionally make the module parameter conditional for wherever
-hcd->fiq_state is touched.
-
-fiq_fsm: Enable by default
-
-dwc_otg: Fix various issues with root port and transaction errors
-
-Process the host port interrupts correctly (and don't trample them).
-Root port hotplug now functional again.
-
-Fix a few thinkos with the transaction error passthrough for fiq_fsm.
-
-fiq_fsm: Implement hack for Split Interrupt transactions
-
-Hubs aren't too picky about which endpoint we send Control type split
-transactions to. By treating Interrupt transfers as Control, it is
-possible to use the non-periodic queue in the OTG core as well as the
-non-periodic FIFOs in the hub itself. This massively reduces the
-microframe exclusivity/contention that periodic split transactions
-otherwise have to enforce.
-
-It goes without saying that this is a fairly egregious USB specification
-violation, but it works.
-
-Original idea by Hans Petter Selasky @ FreeBSD.org.
-
-dwc_otg: FIQ support on SMP. Set up FIQ stack and handler on Core 0 only.
-
-dwc_otg: introduce fiq_fsm_spin(un|)lock()
-
-SMP safety for the FIQ relies on register read-modify write cycles being
-completed in the correct order. Several places in the DWC code modify
-registers also touched by the FIQ. Protect these by a bare-bones lock
-mechanism.
-
-This also makes it possible to run the FIQ and IRQ handlers on different
-cores.
-
-fiq_fsm: fix build on bcm2708 and bcm2709 platforms
-
-dwc_otg: put some barriers back where they should be for UP
-
-bcm2709/dwc_otg: Setup FIQ on core 1 if >1 core active
-
-dwc_otg: fixup read-modify-write in critical paths
-
-Be more careful about read-modify-write on registers that the FIQ
-also touches.
-
-Guard fiq_fsm_spin_lock with fiq_enable check
-
-fiq_fsm: Falling out of the state machine isn't fatal
-
-This edge case can be hit if the port is disabled while the FIQ is
-in the middle of a transaction. Make the effects less severe.
-
-Also get rid of the useless return value.
-
-squash: dwc_otg: Allow to build without SMP
-
-usb: core: make overcurrent messages more prominent
-
-Hub overcurrent messages are more serious than "debug". Increase loglevel.
-
-usb: dwc_otg: Don't use dma_to_virt()
-
-Commit 6ce0d20 changes dma_to_virt() which breaks this driver.
-Open code the old dma_to_virt() implementation to work around this.
-
-Limit the use of __bus_to_virt() to cases where transfer_buffer_length
-is set and transfer_buffer is not set. This is done to increase the
-chance that this driver will also work on ARCH_BCM2835.
-
-transfer_buffer should not be NULL if the length is set, but the
-comment in the code indicates that there are situations where this
-might happen. drivers/usb/isp1760/isp1760-hcd.c also has a similar
-comment pointing to a possible: 'usb storage / SCSI bug'.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dwc_otg: Fix crash when fiq_enable=0
-
-dwc_otg: fiq_fsm: Make high-speed isochronous strided transfers work properly
-
-Certain low-bandwidth high-speed USB devices (specialist audio devices,
-compressed-frame webcams) have packet intervals > 1 microframe.
-
-Stride these transfers in the FIQ by using the start-of-frame interrupt
-to restart the channel at the right time.
-
-dwc_otg: Force host mode to fix incorrect compute module boards
-
-dwc_otg: Add ARCH_BCM2835 support
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dwc_otg: Simplify FIQ irq number code
-
-Dropping ATAGS means we can simplify the FIQ irq number code.
-Also add error checking on the returned irq number.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
-
-dwc_otg: Remove duplicate gadget probe/unregister function
-
-dwc_otg: Properly set the HFIR
-
-Douglas Anderson reported:
-
-According to the most up to date version of the dwc2 databook, the FRINT
-field of the HFIR register should be programmed to:
-* 125 us * (PHY clock freq for HS) - 1
-* 1000 us * (PHY clock freq for FS/LS) - 1
-
-This is opposed to older versions of the doc that claimed it should be:
-* 125 us * (PHY clock freq for HS)
-* 1000 us * (PHY clock freq for FS/LS)
-
-and reported lower timing jitter on a USB analyser
-
-dcw_otg: trim xfer length when buffer larger than allocated size is received
-
-dwc_otg: Don't free qh align buffers in atomic context
-
-dwc_otg: Enable the hack for Split Interrupt transactions by default
-
-dwc_otg.fiq_fsm_mask=0xF has long been a suggestion for users with audio stutters or other USB bandwidth issues.
-So far we are aware of many success stories but no failure caused by this setting.
-Make it a default to learn more.
-
-See: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=70437
-
-Signed-off-by: popcornmix <popcornmix@gmail.com>
-
-dwc_otg: Use kzalloc when suitable
-
-dwc_otg: Pass struct device to dma_alloc*()
-
-This makes it possible to get the bus address from Device Tree.
-
-Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
----
- arch/arm/include/asm/irqflags.h | 16 +-
- arch/arm/kernel/fiqasm.S | 4 +
- drivers/usb/Makefile | 1 +
- drivers/usb/core/generic.c | 1 +
- drivers/usb/core/hub.c | 2 +-
- drivers/usb/core/message.c | 79 +
- drivers/usb/core/otg_whitelist.h | 114 +-
- drivers/usb/gadget/file_storage.c | 3676 ++++++++++
- drivers/usb/host/Kconfig | 13 +
- drivers/usb/host/Makefile | 2 +
- drivers/usb/host/dwc_common_port/Makefile | 58 +
- drivers/usb/host/dwc_common_port/Makefile.fbsd | 17 +
- drivers/usb/host/dwc_common_port/Makefile.linux | 49 +
- drivers/usb/host/dwc_common_port/changes.txt | 174 +
- drivers/usb/host/dwc_common_port/doc/doxygen.cfg | 270 +
- drivers/usb/host/dwc_common_port/dwc_cc.c | 532 ++
- drivers/usb/host/dwc_common_port/dwc_cc.h | 224 +
- drivers/usb/host/dwc_common_port/dwc_common_fbsd.c | 1308 ++++
- .../usb/host/dwc_common_port/dwc_common_linux.c | 1418 ++++
- drivers/usb/host/dwc_common_port/dwc_common_nbsd.c | 1275 ++++
- drivers/usb/host/dwc_common_port/dwc_crypto.c | 308 +
- drivers/usb/host/dwc_common_port/dwc_crypto.h | 111 +
- drivers/usb/host/dwc_common_port/dwc_dh.c | 291 +
- drivers/usb/host/dwc_common_port/dwc_dh.h | 106 +
- drivers/usb/host/dwc_common_port/dwc_list.h | 594 ++
- drivers/usb/host/dwc_common_port/dwc_mem.c | 245 +
- drivers/usb/host/dwc_common_port/dwc_modpow.c | 636 ++
- drivers/usb/host/dwc_common_port/dwc_modpow.h | 34 +
- drivers/usb/host/dwc_common_port/dwc_notifier.c | 319 +
- drivers/usb/host/dwc_common_port/dwc_notifier.h | 122 +
- drivers/usb/host/dwc_common_port/dwc_os.h | 1276 ++++
- drivers/usb/host/dwc_common_port/usb.h | 946 +++
- drivers/usb/host/dwc_otg/Makefile | 82 +
- drivers/usb/host/dwc_otg/doc/doxygen.cfg | 224 +
- drivers/usb/host/dwc_otg/dummy_audio.c | 1574 +++++
- drivers/usb/host/dwc_otg/dwc_cfi_common.h | 142 +
- drivers/usb/host/dwc_otg/dwc_otg_adp.c | 854 +++
- drivers/usb/host/dwc_otg/dwc_otg_adp.h | 80 +
- drivers/usb/host/dwc_otg/dwc_otg_attr.c | 1210 ++++
- drivers/usb/host/dwc_otg/dwc_otg_attr.h | 89 +
- drivers/usb/host/dwc_otg/dwc_otg_cfi.c | 1876 +++++
- drivers/usb/host/dwc_otg/dwc_otg_cfi.h | 320 +
- drivers/usb/host/dwc_otg/dwc_otg_cil.c | 7141 ++++++++++++++++++++
- drivers/usb/host/dwc_otg/dwc_otg_cil.h | 1464 ++++
- drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c | 1594 +++++
- drivers/usb/host/dwc_otg/dwc_otg_core_if.h | 705 ++
- drivers/usb/host/dwc_otg/dwc_otg_dbg.h | 117 +
- drivers/usb/host/dwc_otg/dwc_otg_driver.c | 1757 +++++
- drivers/usb/host/dwc_otg/dwc_otg_driver.h | 86 +
- drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 1355 ++++
- drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h | 370 +
- drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S | 80 +
- drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4260 ++++++++++++
- drivers/usb/host/dwc_otg/dwc_otg_hcd.h | 868 +++
- drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c | 1139 ++++
- drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h | 417 ++
- drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c | 2727 ++++++++
- drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c | 1005 +++
- drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c | 963 +++
- drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 188 +
- drivers/usb/host/dwc_otg/dwc_otg_pcd.c | 2725 ++++++++
- drivers/usb/host/dwc_otg/dwc_otg_pcd.h | 273 +
- drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h | 361 +
- drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c | 5148 ++++++++++++++
- drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c | 1280 ++++
- drivers/usb/host/dwc_otg/dwc_otg_regs.h | 2550 +++++++
- drivers/usb/host/dwc_otg/test/Makefile | 16 +
- drivers/usb/host/dwc_otg/test/dwc_otg_test.pm | 337 +
- drivers/usb/host/dwc_otg/test/test_mod_param.pl | 133 +
- drivers/usb/host/dwc_otg/test/test_sysfs.pl | 193 +
- 70 files changed, 59908 insertions(+), 16 deletions(-)
- create mode 100644 drivers/usb/gadget/file_storage.c
- create mode 100644 drivers/usb/host/dwc_common_port/Makefile
- create mode 100644 drivers/usb/host/dwc_common_port/Makefile.fbsd
- create mode 100644 drivers/usb/host/dwc_common_port/Makefile.linux
- create mode 100644 drivers/usb/host/dwc_common_port/changes.txt
- create mode 100644 drivers/usb/host/dwc_common_port/doc/doxygen.cfg
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.h
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_linux.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.h
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.h
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_list.h
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_mem.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.h
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.c
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.h
- create mode 100644 drivers/usb/host/dwc_common_port/dwc_os.h
- create mode 100644 drivers/usb/host/dwc_common_port/usb.h
- create mode 100644 drivers/usb/host/dwc_otg/Makefile
- create mode 100644 drivers/usb/host/dwc_otg/doc/doxygen.cfg
- create mode 100644 drivers/usb/host/dwc_otg/dummy_audio.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_cfi_common.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_core_if.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_dbg.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
- create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_regs.h
- create mode 100644 drivers/usb/host/dwc_otg/test/Makefile
- create mode 100644 drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
- create mode 100644 drivers/usb/host/dwc_otg/test/test_mod_param.pl
- create mode 100644 drivers/usb/host/dwc_otg/test/test_sysfs.pl
-
---- a/arch/arm/include/asm/irqflags.h
-+++ b/arch/arm/include/asm/irqflags.h
-@@ -162,13 +162,23 @@ static inline unsigned long arch_local_s
- }
-
- /*
-- * restore saved IRQ & FIQ state
-+ * restore saved IRQ state
- */
- #define arch_local_irq_restore arch_local_irq_restore
- static inline void arch_local_irq_restore(unsigned long flags)
- {
-- asm volatile(
-- " msr " IRQMASK_REG_NAME_W ", %0 @ local_irq_restore"
-+ unsigned long temp = 0;
-+ flags &= ~(1 << 6);
-+ asm volatile (
-+ " mrs %0, cpsr"
-+ : "=r" (temp)
-+ :
-+ : "memory", "cc");
-+ /* Preserve FIQ bit */
-+ temp &= (1 << 6);
-+ flags = flags | temp;
-+ asm volatile (
-+ " msr cpsr_c, %0 @ local_irq_restore"
- :
- : "r" (flags)
- : "memory", "cc");
---- a/arch/arm/kernel/fiqasm.S
-+++ b/arch/arm/kernel/fiqasm.S
-@@ -47,3 +47,7 @@ ENTRY(__get_fiq_regs)
- mov r0, r0 @ avoid hazard prior to ARMv4
- ret lr
- ENDPROC(__get_fiq_regs)
-+
-+ENTRY(__FIQ_Branch)
-+ mov pc, r8
-+ENDPROC(__FIQ_Branch)
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -7,6 +7,7 @@
- obj-$(CONFIG_USB) += core/
- obj-$(CONFIG_USB_SUPPORT) += phy/
-
-+obj-$(CONFIG_USB_DWCOTG) += host/
- obj-$(CONFIG_USB_DWC3) += dwc3/
- obj-$(CONFIG_USB_DWC2) += dwc2/
- obj-$(CONFIG_USB_ISP1760) += isp1760/
---- a/drivers/usb/core/generic.c
-+++ b/drivers/usb/core/generic.c
-@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_
- dev_warn(&udev->dev,
- "no configuration chosen from %d choice%s\n",
- num_configs, plural(num_configs));
-+ dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA);
- }
- return i;
- }
---- a/drivers/usb/core/hub.c
-+++ b/drivers/usb/core/hub.c
-@@ -5074,7 +5074,7 @@ static void port_event(struct usb_hub *h
- if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
- u16 status = 0, unused;
-
-- dev_dbg(&port_dev->dev, "over-current change\n");
-+ dev_notice(&port_dev->dev, "over-current change\n");
- usb_clear_port_feature(hdev, port1,
- USB_PORT_FEAT_C_OVER_CURRENT);
- msleep(100); /* Cool down */
---- a/drivers/usb/core/message.c
-+++ b/drivers/usb/core/message.c
-@@ -1923,6 +1923,85 @@ free_interfaces:
- if (cp->string == NULL &&
- !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
- cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
-+/* Uncomment this define to enable the HS Electrical Test support */
-+#define DWC_HS_ELECT_TST 1
-+#ifdef DWC_HS_ELECT_TST
-+ /* Here we implement the HS Electrical Test support. The
-+ * tester uses a vendor ID of 0x1A0A to indicate we should
-+ * run a special test sequence. The product ID tells us
-+ * which sequence to run. We invoke the test sequence by
-+ * sending a non-standard SetFeature command to our root
-+ * hub port. Our dwc_otg_hcd_hub_control() routine will
-+ * recognize the command and perform the desired test
-+ * sequence.
-+ */
-+ if (dev->descriptor.idVendor == 0x1A0A) {
-+ /* HSOTG Electrical Test */
-+ dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n");
-+
-+ if (dev->bus && dev->bus->root_hub) {
-+ struct usb_device *hdev = dev->bus->root_hub;
-+ dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct);
-+
-+ switch (dev->descriptor.idProduct) {
-+ case 0x0101: /* TEST_SE0_NAK */
-+ dev_warn(&dev->dev, "TEST_SE0_NAK\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ);
-+ break;
-+
-+ case 0x0102: /* TEST_J */
-+ dev_warn(&dev->dev, "TEST_J\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ);
-+ break;
-+
-+ case 0x0103: /* TEST_K */
-+ dev_warn(&dev->dev, "TEST_K\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ);
-+ break;
-+
-+ case 0x0104: /* TEST_PACKET */
-+ dev_warn(&dev->dev, "TEST_PACKET\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ);
-+ break;
-+
-+ case 0x0105: /* TEST_FORCE_ENABLE */
-+ dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ);
-+ break;
-+
-+ case 0x0106: /* HS_HOST_PORT_SUSPEND_RESUME */
-+ dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ);
-+ break;
-+
-+ case 0x0107: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-+ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ);
-+ break;
-+
-+ case 0x0108: /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-+ dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n");
-+ usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
-+ USB_REQ_SET_FEATURE, USB_RT_PORT,
-+ USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ);
-+ }
-+ }
-+ }
-+#endif /* DWC_HS_ELECT_TST */
-
- /* Now that the interfaces are installed, re-enable LPM. */
- usb_unlocked_enable_lpm(dev);
---- a/drivers/usb/core/otg_whitelist.h
-+++ b/drivers/usb/core/otg_whitelist.h
-@@ -19,33 +19,82 @@
- static struct usb_device_id whitelist_table[] = {
-
- /* hubs are optional in OTG, but very handy ... */
-+#define CERT_WITHOUT_HUBS
-+#if defined(CERT_WITHOUT_HUBS)
-+{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/
-+#else
- { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
- { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
-+{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), },
-+#endif
-
- #ifdef CONFIG_USB_PRINTER /* ignoring nonstatic linkage! */
- /* FIXME actually, printers are NOT supposed to use device classes;
- * they're supposed to use interface classes...
- */
--{ USB_DEVICE_INFO(7, 1, 1) },
--{ USB_DEVICE_INFO(7, 1, 2) },
--{ USB_DEVICE_INFO(7, 1, 3) },
-+//{ USB_DEVICE_INFO(7, 1, 1) },
-+//{ USB_DEVICE_INFO(7, 1, 2) },
-+//{ USB_DEVICE_INFO(7, 1, 3) },
- #endif
-
- #ifdef CONFIG_USB_NET_CDCETHER
- /* Linux-USB CDC Ethernet gadget */
--{ USB_DEVICE(0x0525, 0xa4a1), },
-+//{ USB_DEVICE(0x0525, 0xa4a1), },
- /* Linux-USB CDC Ethernet + RNDIS gadget */
--{ USB_DEVICE(0x0525, 0xa4a2), },
-+//{ USB_DEVICE(0x0525, 0xa4a2), },
- #endif
-
- #if IS_ENABLED(CONFIG_USB_TEST)
- /* gadget zero, for testing */
--{ USB_DEVICE(0x0525, 0xa4a0), },
-+//{ USB_DEVICE(0x0525, 0xa4a0), },
- #endif
-
-+/* OPT Tester */
-+{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */
-+{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */
-+{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */
-+{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */
-+{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */
-+{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME */
-+{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */
-+{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */
-+
-+/* Sony cameras */
-+{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), },
-+
-+/* Memory Devices */
-+//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */
-+//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */
-+//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */
-+//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD */
-+{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/
-+//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */
-+
-+/* HP Printers */
-+//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */
-+//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */
-+
-+/* Speakers */
-+//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */
-+//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */
-+
- { } /* Terminating entry */
- };
-
-+static inline void report_errors(struct usb_device *dev)
-+{
-+ /* OTG MESSAGE: report errors here, customize to match your product */
-+ dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n",
-+ le16_to_cpu(dev->descriptor.idVendor),
-+ le16_to_cpu(dev->descriptor.idProduct));
-+ if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){
-+ dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n");
-+ } else {
-+ dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n");
-+ }
-+}
-+
-+
- static int is_targeted(struct usb_device *dev)
- {
- struct usb_device_id *id = whitelist_table;
-@@ -95,16 +144,57 @@ static int is_targeted(struct usb_device
- continue;
-
- return 1;
-- }
-+ /* NOTE: can't use usb_match_id() since interface caches
-+ * aren't set up yet. this is cut/paste from that code.
-+ */
-+ for (id = whitelist_table; id->match_flags; id++) {
-+#ifdef DEBUG
-+ dev_dbg(&dev->dev,
-+ "ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
-+ id->idVendor,
-+ id->idProduct,
-+ id->bDeviceClass,
-+ id->bDeviceSubClass,
-+ id->bDeviceProtocol);
-+#endif
-
-- /* add other match criteria here ... */
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
-+ id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
-+ continue;
-+
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
-+ id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
-+ continue;
-+
-+ /* No need to test id->bcdDevice_lo != 0, since 0 is never
-+ greater than any unsigned number. */
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
-+ (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
-+ continue;
-+
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
-+ (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
-+ continue;
-+
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
-+ (id->bDeviceClass != dev->descriptor.bDeviceClass))
-+ continue;
-+
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
-+ (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
-+ continue;
-+
-+ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
-+ (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
-+ continue;
-
-+ return 1;
-+ }
-+ }
-
-- /* OTG MESSAGE: report errors here, customize to match your product */
-- dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
-- le16_to_cpu(dev->descriptor.idVendor),
-- le16_to_cpu(dev->descriptor.idProduct));
-+ /* add other match criteria here ... */
-
-+ report_errors(dev);
- return 0;
- }
-
---- /dev/null
-+++ b/drivers/usb/gadget/file_storage.c
-@@ -0,0 +1,3676 @@
-+/*
-+ * file_storage.c -- File-backed USB Storage Gadget, for USB development
-+ *
-+ * Copyright (C) 2003-2008 Alan Stern
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions, and the following disclaimer,
-+ * without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ * to endorse or promote products derived from this software without
-+ * specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*
-+ * The File-backed Storage Gadget acts as a USB Mass Storage device,
-+ * appearing to the host as a disk drive or as a CD-ROM drive. In addition
-+ * to providing an example of a genuinely useful gadget driver for a USB
-+ * device, it also illustrates a technique of double-buffering for increased
-+ * throughput. Last but not least, it gives an easy way to probe the
-+ * behavior of the Mass Storage drivers in a USB host.
-+ *
-+ * Backing storage is provided by a regular file or a block device, specified
-+ * by the "file" module parameter. Access can be limited to read-only by
-+ * setting the optional "ro" module parameter. (For CD-ROM emulation,
-+ * access is always read-only.) The gadget will indicate that it has
-+ * removable media if the optional "removable" module parameter is set.
-+ *
-+ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
-+ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
-+ * by the optional "transport" module parameter. It also supports the
-+ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
-+ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
-+ * the optional "protocol" module parameter. In addition, the default
-+ * Vendor ID, Product ID, release number and serial number can be overridden.
-+ *
-+ * There is support for multiple logical units (LUNs), each of which has
-+ * its own backing file. The number of LUNs can be set using the optional
-+ * "luns" module parameter (anywhere from 1 to 8), and the corresponding
-+ * files are specified using comma-separated lists for "file" and "ro".
-+ * The default number of LUNs is taken from the number of "file" elements;
-+ * it is 1 if "file" is not given. If "removable" is not set then a backing
-+ * file must be specified for each LUN. If it is set, then an unspecified
-+ * or empty backing filename means the LUN's medium is not loaded. Ideally
-+ * each LUN would be settable independently as a disk drive or a CD-ROM
-+ * drive, but currently all LUNs have to be the same type. The CD-ROM
-+ * emulation includes a single data track and no audio tracks; hence there
-+ * need be only one backing file per LUN.
-+ *
-+ * Requirements are modest; only a bulk-in and a bulk-out endpoint are
-+ * needed (an interrupt-out endpoint is also needed for CBI). The memory
-+ * requirement amounts to two 16K buffers, size configurable by a parameter.
-+ * Support is included for both full-speed and high-speed operation.
-+ *
-+ * Note that the driver is slightly non-portable in that it assumes a
-+ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
-+ * interrupt-in endpoints. With most device controllers this isn't an
-+ * issue, but there may be some with hardware restrictions that prevent
-+ * a buffer from being used by more than one endpoint.
-+ *
-+ * Module options:
-+ *
-+ * file=filename[,filename...]
-+ * Required if "removable" is not set, names of
-+ * the files or block devices used for
-+ * backing storage
-+ * serial=HHHH... Required serial number (string of hex chars)
-+ * ro=b[,b...] Default false, booleans for read-only access
-+ * removable Default false, boolean for removable media
-+ * luns=N Default N = number of filenames, number of
-+ * LUNs to support
-+ * nofua=b[,b...] Default false, booleans for ignore FUA flag
-+ * in SCSI WRITE(10,12) commands
-+ * stall Default determined according to the type of
-+ * USB device controller (usually true),
-+ * boolean to permit the driver to halt
-+ * bulk endpoints
-+ * cdrom Default false, boolean for whether to emulate
-+ * a CD-ROM drive
-+ * transport=XXX Default BBB, transport name (CB, CBI, or BBB)
-+ * protocol=YYY Default SCSI, protocol name (RBC, 8020 or
-+ * ATAPI, QIC, UFI, 8070, or SCSI;
-+ * also 1 - 6)
-+ * vendor=0xVVVV Default 0x0525 (NetChip), USB Vendor ID
-+ * product=0xPPPP Default 0xa4a5 (FSG), USB Product ID
-+ * release=0xRRRR Override the USB release number (bcdDevice)
-+ * buflen=N Default N=16384, buffer size used (will be
-+ * rounded down to a multiple of
-+ * PAGE_CACHE_SIZE)
-+ *
-+ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
-+ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
-+ * default values are used for everything else.
-+ *
-+ * The pathnames of the backing files and the ro settings are available in
-+ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
-+ * the gadget's sysfs directory. If the "removable" option is set, writing to
-+ * these files will simulate ejecting/loading the medium (writing an empty
-+ * line means eject) and adjusting a write-enable tab. Changes to the ro
-+ * setting are not allowed when the medium is loaded or if CD-ROM emulation
-+ * is being used.
-+ *
-+ * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
-+ * The driver's SCSI command interface was based on the "Information
-+ * technology - Small Computer System Interface - 2" document from
-+ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
-+ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>. The single exception
-+ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
-+ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
-+ * document, Revision 1.0, December 14, 1998, available at
-+ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
-+ */
-+
-+
-+/*
-+ * Driver Design
-+ *
-+ * The FSG driver is fairly straightforward. There is a main kernel
-+ * thread that handles most of the work. Interrupt routines field
-+ * callbacks from the controller driver: bulk- and interrupt-request
-+ * completion notifications, endpoint-0 events, and disconnect events.
-+ * Completion events are passed to the main thread by wakeup calls. Many
-+ * ep0 requests are handled at interrupt time, but SetInterface,
-+ * SetConfiguration, and device reset requests are forwarded to the
-+ * thread in the form of "exceptions" using SIGUSR1 signals (since they
-+ * should interrupt any ongoing file I/O operations).
-+ *
-+ * The thread's main routine implements the standard command/data/status
-+ * parts of a SCSI interaction. It and its subroutines are full of tests
-+ * for pending signals/exceptions -- all this polling is necessary since
-+ * the kernel has no setjmp/longjmp equivalents. (Maybe this is an
-+ * indication that the driver really wants to be running in userspace.)
-+ * An important point is that so long as the thread is alive it keeps an
-+ * open reference to the backing file. This will prevent unmounting
-+ * the backing file's underlying filesystem and could cause problems
-+ * during system shutdown, for example. To prevent such problems, the
-+ * thread catches INT, TERM, and KILL signals and converts them into
-+ * an EXIT exception.
-+ *
-+ * In normal operation the main thread is started during the gadget's
-+ * fsg_bind() callback and stopped during fsg_unbind(). But it can also
-+ * exit when it receives a signal, and there's no point leaving the
-+ * gadget running when the thread is dead. So just before the thread
-+ * exits, it deregisters the gadget driver. This makes things a little
-+ * tricky: The driver is deregistered at two places, and the exiting
-+ * thread can indirectly call fsg_unbind() which in turn can tell the
-+ * thread to exit. The first problem is resolved through the use of the
-+ * REGISTERED atomic bitflag; the driver will only be deregistered once.
-+ * The second problem is resolved by having fsg_unbind() check
-+ * fsg->state; it won't try to stop the thread if the state is already
-+ * FSG_STATE_TERMINATED.
-+ *
-+ * To provide maximum throughput, the driver uses a circular pipeline of
-+ * buffer heads (struct fsg_buffhd). In principle the pipeline can be
-+ * arbitrarily long; in practice the benefits don't justify having more
-+ * than 2 stages (i.e., double buffering). But it helps to think of the
-+ * pipeline as being a long one. Each buffer head contains a bulk-in and
-+ * a bulk-out request pointer (since the buffer can be used for both
-+ * output and input -- directions always are given from the host's
-+ * point of view) as well as a pointer to the buffer and various state
-+ * variables.
-+ *
-+ * Use of the pipeline follows a simple protocol. There is a variable
-+ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
-+ * At any time that buffer head may still be in use from an earlier
-+ * request, so each buffer head has a state variable indicating whether
-+ * it is EMPTY, FULL, or BUSY. Typical use involves waiting for the
-+ * buffer head to be EMPTY, filling the buffer either by file I/O or by
-+ * USB I/O (during which the buffer head is BUSY), and marking the buffer
-+ * head FULL when the I/O is complete. Then the buffer will be emptied
-+ * (again possibly by USB I/O, during which it is marked BUSY) and
-+ * finally marked EMPTY again (possibly by a completion routine).
-+ *
-+ * A module parameter tells the driver to avoid stalling the bulk
-+ * endpoints wherever the transport specification allows. This is
-+ * necessary for some UDCs like the SuperH, which cannot reliably clear a
-+ * halt on a bulk endpoint. However, under certain circumstances the
-+ * Bulk-only specification requires a stall. In such cases the driver
-+ * will halt the endpoint and set a flag indicating that it should clear
-+ * the halt in software during the next device reset. Hopefully this
-+ * will permit everything to work correctly. Furthermore, although the
-+ * specification allows the bulk-out endpoint to halt when the host sends
-+ * too much data, implementing this would cause an unavoidable race.
-+ * The driver will always use the "no-stall" approach for OUT transfers.
-+ *
-+ * One subtle point concerns sending status-stage responses for ep0
-+ * requests. Some of these requests, such as device reset, can involve
-+ * interrupting an ongoing file I/O operation, which might take an
-+ * arbitrarily long time. During that delay the host might give up on
-+ * the original ep0 request and issue a new one. When that happens the
-+ * driver should not notify the host about completion of the original
-+ * request, as the host will no longer be waiting for it. So the driver
-+ * assigns to each ep0 request a unique tag, and it keeps track of the
-+ * tag value of the request associated with a long-running exception
-+ * (device-reset, interface-change, or configuration-change). When the
-+ * exception handler is finished, the status-stage response is submitted
-+ * only if the current ep0 request tag is equal to the exception request
-+ * tag. Thus only the most recently received ep0 request will get a
-+ * status-stage response.
-+ *
-+ * Warning: This driver source file is too long. It ought to be split up
-+ * into a header file plus about 3 separate .c files, to handle the details
-+ * of the Gadget, USB Mass Storage, and SCSI protocols.
-+ */
-+
-+
-+/* #define VERBOSE_DEBUG */
-+/* #define DUMP_MSGS */
-+
-+
-+#include <linux/blkdev.h>
-+#include <linux/completion.h>
-+#include <linux/dcache.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/fcntl.h>
-+#include <linux/file.h>
-+#include <linux/fs.h>
-+#include <linux/kref.h>
-+#include <linux/kthread.h>
-+#include <linux/limits.h>
-+#include <linux/module.h>
-+#include <linux/rwsem.h>
-+#include <linux/slab.h>
-+#include <linux/spinlock.h>
-+#include <linux/string.h>
-+#include <linux/freezer.h>
-+#include <linux/utsname.h>
-+
-+#include <linux/usb/ch9.h>
-+#include <linux/usb/gadget.h>
-+
-+#include "gadget_chips.h"
-+
-+
-+
-+/*
-+ * Kbuild is not very cooperative with respect to linking separately
-+ * compiled library objects into one module. So for now we won't use
-+ * separate compilation ... ensuring init/exit sections work to shrink
-+ * the runtime footprint, and giving us at least some parts of what
-+ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
-+ */
-+#include "usbstring.c"
-+#include "config.c"
-+#include "epautoconf.c"
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#define DRIVER_DESC "File-backed Storage Gadget"
-+#define DRIVER_NAME "g_file_storage"
-+#define DRIVER_VERSION "1 September 2010"
-+
-+static char fsg_string_manufacturer[64];
-+static const char fsg_string_product[] = DRIVER_DESC;
-+static const char fsg_string_config[] = "Self-powered";
-+static const char fsg_string_interface[] = "Mass Storage";
-+
-+
-+#include "storage_common.c"
-+
-+
-+MODULE_DESCRIPTION(DRIVER_DESC);
-+MODULE_AUTHOR("Alan Stern");
-+MODULE_LICENSE("Dual BSD/GPL");
-+
-+/*
-+ * This driver assumes self-powered hardware and has no way for users to
-+ * trigger remote wakeup. It uses autoconfiguration to select endpoints
-+ * and endpoint addresses.
-+ */
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+
-+/* Encapsulate the module parameter settings */
-+
-+static struct {
-+ char *file[FSG_MAX_LUNS];
-+ char *serial;
-+ bool ro[FSG_MAX_LUNS];
-+ bool nofua[FSG_MAX_LUNS];
-+ unsigned int num_filenames;
-+ unsigned int num_ros;
-+ unsigned int num_nofuas;
-+ unsigned int nluns;
-+
-+ bool removable;
-+ bool can_stall;
-+ bool cdrom;
-+
-+ char *transport_parm;
-+ char *protocol_parm;
-+ unsigned short vendor;
-+ unsigned short product;
-+ unsigned short release;
-+ unsigned int buflen;
-+
-+ int transport_type;
-+ char *transport_name;
-+ int protocol_type;
-+ char *protocol_name;
-+
-+} mod_data = { // Default values
-+ .transport_parm = "BBB",
-+ .protocol_parm = "SCSI",
-+ .removable = 0,
-+ .can_stall = 1,
-+ .cdrom = 0,
-+ .vendor = FSG_VENDOR_ID,
-+ .product = FSG_PRODUCT_ID,
-+ .release = 0xffff, // Use controller chip type
-+ .buflen = 16384,
-+ };
-+
-+
-+module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
-+ S_IRUGO);
-+MODULE_PARM_DESC(file, "names of backing files or devices");
-+
-+module_param_named(serial, mod_data.serial, charp, S_IRUGO);
-+MODULE_PARM_DESC(serial, "USB serial number");
-+
-+module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
-+MODULE_PARM_DESC(ro, "true to force read-only");
-+
-+module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
-+ S_IRUGO);
-+MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
-+
-+module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
-+MODULE_PARM_DESC(luns, "number of LUNs");
-+
-+module_param_named(removable, mod_data.removable, bool, S_IRUGO);
-+MODULE_PARM_DESC(removable, "true to simulate removable media");
-+
-+module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
-+MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
-+
-+module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
-+MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
-+
-+/* In the non-TEST version, only the module parameters listed above
-+ * are available. */
-+#ifdef CONFIG_USB_FILE_STORAGE_TEST
-+
-+module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
-+MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
-+
-+module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
-+MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
-+ "8070, or SCSI)");
-+
-+module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
-+MODULE_PARM_DESC(vendor, "USB Vendor ID");
-+
-+module_param_named(product, mod_data.product, ushort, S_IRUGO);
-+MODULE_PARM_DESC(product, "USB Product ID");
-+
-+module_param_named(release, mod_data.release, ushort, S_IRUGO);
-+MODULE_PARM_DESC(release, "USB release number");
-+
-+module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
-+MODULE_PARM_DESC(buflen, "I/O buffer size");
-+
-+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-+
-+
-+/*
-+ * These definitions will permit the compiler to avoid generating code for
-+ * parts of the driver that aren't used in the non-TEST version. Even gcc
-+ * can recognize when a test of a constant expression yields a dead code
-+ * path.
-+ */
-+
-+#ifdef CONFIG_USB_FILE_STORAGE_TEST
-+
-+#define transport_is_bbb() (mod_data.transport_type == USB_PR_BULK)
-+#define transport_is_cbi() (mod_data.transport_type == USB_PR_CBI)
-+#define protocol_is_scsi() (mod_data.protocol_type == USB_SC_SCSI)
-+
-+#else
-+
-+#define transport_is_bbb() 1
-+#define transport_is_cbi() 0
-+#define protocol_is_scsi() 1
-+
-+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+
-+struct fsg_dev {
-+ /* lock protects: state, all the req_busy's, and cbbuf_cmnd */
-+ spinlock_t lock;
-+ struct usb_gadget *gadget;
-+
-+ /* filesem protects: backing files in use */
-+ struct rw_semaphore filesem;
-+
-+ /* reference counting: wait until all LUNs are released */
-+ struct kref ref;
-+
-+ struct usb_ep *ep0; // Handy copy of gadget->ep0
-+ struct usb_request *ep0req; // For control responses
-+ unsigned int ep0_req_tag;
-+ const char *ep0req_name;
-+
-+ struct usb_request *intreq; // For interrupt responses
-+ int intreq_busy;
-+ struct fsg_buffhd *intr_buffhd;
-+
-+ unsigned int bulk_out_maxpacket;
-+ enum fsg_state state; // For exception handling
-+ unsigned int exception_req_tag;
-+
-+ u8 config, new_config;
-+
-+ unsigned int running : 1;
-+ unsigned int bulk_in_enabled : 1;
-+ unsigned int bulk_out_enabled : 1;
-+ unsigned int intr_in_enabled : 1;
-+ unsigned int phase_error : 1;
-+ unsigned int short_packet_received : 1;
-+ unsigned int bad_lun_okay : 1;
-+
-+ unsigned long atomic_bitflags;
-+#define REGISTERED 0
-+#define IGNORE_BULK_OUT 1
-+#define SUSPENDED 2
-+
-+ struct usb_ep *bulk_in;
-+ struct usb_ep *bulk_out;
-+ struct usb_ep *intr_in;
-+
-+ struct fsg_buffhd *next_buffhd_to_fill;
-+ struct fsg_buffhd *next_buffhd_to_drain;
-+
-+ int thread_wakeup_needed;
-+ struct completion thread_notifier;
-+ struct task_struct *thread_task;
-+
-+ int cmnd_size;
-+ u8 cmnd[MAX_COMMAND_SIZE];
-+ enum data_direction data_dir;
-+ u32 data_size;
-+ u32 data_size_from_cmnd;
-+ u32 tag;
-+ unsigned int lun;
-+ u32 residue;
-+ u32 usb_amount_left;
-+
-+ /* The CB protocol offers no way for a host to know when a command
-+ * has completed. As a result the next command may arrive early,
-+ * and we will still have to handle it. For that reason we need
-+ * a buffer to store new commands when using CB (or CBI, which
-+ * does not oblige a host to wait for command completion either). */
-+ int cbbuf_cmnd_size;
-+ u8 cbbuf_cmnd[MAX_COMMAND_SIZE];
-+
-+ unsigned int nluns;
-+ struct fsg_lun *luns;
-+ struct fsg_lun *curlun;
-+ /* Must be the last entry */
-+ struct fsg_buffhd buffhds[];
-+};
-+
-+typedef void (*fsg_routine_t)(struct fsg_dev *);
-+
-+static int exception_in_progress(struct fsg_dev *fsg)
-+{
-+ return (fsg->state > FSG_STATE_IDLE);
-+}
-+
-+/* Make bulk-out requests be divisible by the maxpacket size */
-+static void set_bulk_out_req_length(struct fsg_dev *fsg,
-+ struct fsg_buffhd *bh, unsigned int length)
-+{
-+ unsigned int rem;
-+
-+ bh->bulk_out_intended_length = length;
-+ rem = length % fsg->bulk_out_maxpacket;
-+ if (rem > 0)
-+ length += fsg->bulk_out_maxpacket - rem;
-+ bh->outreq->length = length;
-+}
-+
-+static struct fsg_dev *the_fsg;
-+static struct usb_gadget_driver fsg_driver;
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
-+{
-+ const char *name;
-+
-+ if (ep == fsg->bulk_in)
-+ name = "bulk-in";
-+ else if (ep == fsg->bulk_out)
-+ name = "bulk-out";
-+ else
-+ name = ep->name;
-+ DBG(fsg, "%s set halt\n", name);
-+ return usb_ep_set_halt(ep);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * DESCRIPTORS ... most are static, but strings and (full) configuration
-+ * descriptors are built on demand. Also the (static) config and interface
-+ * descriptors are adjusted during fsg_bind().
-+ */
-+
-+/* There is only one configuration. */
-+#define CONFIG_VALUE 1
-+
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+
-+ .bcdUSB = cpu_to_le16(0x0200),
-+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
-+
-+ /* The next three values can be overridden by module parameters */
-+ .idVendor = cpu_to_le16(FSG_VENDOR_ID),
-+ .idProduct = cpu_to_le16(FSG_PRODUCT_ID),
-+ .bcdDevice = cpu_to_le16(0xffff),
-+
-+ .iManufacturer = FSG_STRING_MANUFACTURER,
-+ .iProduct = FSG_STRING_PRODUCT,
-+ .iSerialNumber = FSG_STRING_SERIAL,
-+ .bNumConfigurations = 1,
-+};
-+
-+static struct usb_config_descriptor
-+config_desc = {
-+ .bLength = sizeof config_desc,
-+ .bDescriptorType = USB_DT_CONFIG,
-+
-+ /* wTotalLength computed by usb_gadget_config_buf() */
-+ .bNumInterfaces = 1,
-+ .bConfigurationValue = CONFIG_VALUE,
-+ .iConfiguration = FSG_STRING_CONFIG,
-+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
-+ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
-+};
-+
-+
-+static struct usb_qualifier_descriptor
-+dev_qualifier = {
-+ .bLength = sizeof dev_qualifier,
-+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-+
-+ .bcdUSB = cpu_to_le16(0x0200),
-+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
-+
-+ .bNumConfigurations = 1,
-+};
-+
-+static int populate_bos(struct fsg_dev *fsg, u8 *buf)
-+{
-+ memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
-+ buf += USB_DT_BOS_SIZE;
-+
-+ memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
-+ buf += USB_DT_USB_EXT_CAP_SIZE;
-+
-+ memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
-+
-+ return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
-+ + USB_DT_USB_EXT_CAP_SIZE;
-+}
-+
-+/*
-+ * Config descriptors must agree with the code that sets configurations
-+ * and with code managing interfaces and their altsettings. They must
-+ * also handle different speeds and other-speed requests.
-+ */
-+static int populate_config_buf(struct usb_gadget *gadget,
-+ u8 *buf, u8 type, unsigned index)
-+{
-+ enum usb_device_speed speed = gadget->speed;
-+ int len;
-+ const struct usb_descriptor_header **function;
-+
-+ if (index > 0)
-+ return -EINVAL;
-+
-+ if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
-+ speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
-+ function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
-+ ? (const struct usb_descriptor_header **)fsg_hs_function
-+ : (const struct usb_descriptor_header **)fsg_fs_function;
-+
-+ /* for now, don't advertise srp-only devices */
-+ if (!gadget_is_otg(gadget))
-+ function++;
-+
-+ len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
-+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-+ return len;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* These routines may be called in process context or in_irq */
-+
-+/* Caller must hold fsg->lock */
-+static void wakeup_thread(struct fsg_dev *fsg)
-+{
-+ /* Tell the main thread that something has happened */
-+ fsg->thread_wakeup_needed = 1;
-+ if (fsg->thread_task)
-+ wake_up_process(fsg->thread_task);
-+}
-+
-+
-+static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
-+{
-+ unsigned long flags;
-+
-+ /* Do nothing if a higher-priority exception is already in progress.
-+ * If a lower-or-equal priority exception is in progress, preempt it
-+ * and notify the main thread by sending it a signal. */
-+ spin_lock_irqsave(&fsg->lock, flags);
-+ if (fsg->state <= new_state) {
-+ fsg->exception_req_tag = fsg->ep0_req_tag;
-+ fsg->state = new_state;
-+ if (fsg->thread_task)
-+ send_sig_info(SIGUSR1, SEND_SIG_FORCED,
-+ fsg->thread_task);
-+ }
-+ spin_unlock_irqrestore(&fsg->lock, flags);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* The disconnect callback and ep0 routines. These always run in_irq,
-+ * except that ep0_queue() is called in the main thread to acknowledge
-+ * completion of various requests: set config, set interface, and
-+ * Bulk-only device reset. */
-+
-+static void fsg_disconnect(struct usb_gadget *gadget)
-+{
-+ struct fsg_dev *fsg = get_gadget_data(gadget);
-+
-+ DBG(fsg, "disconnect or port reset\n");
-+ raise_exception(fsg, FSG_STATE_DISCONNECT);
-+}
-+
-+
-+static int ep0_queue(struct fsg_dev *fsg)
-+{
-+ int rc;
-+
-+ rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
-+ if (rc != 0 && rc != -ESHUTDOWN) {
-+
-+ /* We can't do much more than wait for a reset */
-+ WARNING(fsg, "error in submission: %s --> %d\n",
-+ fsg->ep0->name, rc);
-+ }
-+ return rc;
-+}
-+
-+static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct fsg_dev *fsg = ep->driver_data;
-+
-+ if (req->actual > 0)
-+ dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
-+ if (req->status || req->actual != req->length)
-+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-+ req->status, req->actual, req->length);
-+ if (req->status == -ECONNRESET) // Request was cancelled
-+ usb_ep_fifo_flush(ep);
-+
-+ if (req->status == 0 && req->context)
-+ ((fsg_routine_t) (req->context))(fsg);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Bulk and interrupt endpoint completion handlers.
-+ * These always run in_irq. */
-+
-+static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct fsg_dev *fsg = ep->driver_data;
-+ struct fsg_buffhd *bh = req->context;
-+
-+ if (req->status || req->actual != req->length)
-+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-+ req->status, req->actual, req->length);
-+ if (req->status == -ECONNRESET) // Request was cancelled
-+ usb_ep_fifo_flush(ep);
-+
-+ /* Hold the lock while we update the request and buffer states */
-+ smp_wmb();
-+ spin_lock(&fsg->lock);
-+ bh->inreq_busy = 0;
-+ bh->state = BUF_STATE_EMPTY;
-+ wakeup_thread(fsg);
-+ spin_unlock(&fsg->lock);
-+}
-+
-+static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct fsg_dev *fsg = ep->driver_data;
-+ struct fsg_buffhd *bh = req->context;
-+
-+ dump_msg(fsg, "bulk-out", req->buf, req->actual);
-+ if (req->status || req->actual != bh->bulk_out_intended_length)
-+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-+ req->status, req->actual,
-+ bh->bulk_out_intended_length);
-+ if (req->status == -ECONNRESET) // Request was cancelled
-+ usb_ep_fifo_flush(ep);
-+
-+ /* Hold the lock while we update the request and buffer states */
-+ smp_wmb();
-+ spin_lock(&fsg->lock);
-+ bh->outreq_busy = 0;
-+ bh->state = BUF_STATE_FULL;
-+ wakeup_thread(fsg);
-+ spin_unlock(&fsg->lock);
-+}
-+
-+
-+#ifdef CONFIG_USB_FILE_STORAGE_TEST
-+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct fsg_dev *fsg = ep->driver_data;
-+ struct fsg_buffhd *bh = req->context;
-+
-+ if (req->status || req->actual != req->length)
-+ DBG(fsg, "%s --> %d, %u/%u\n", __func__,
-+ req->status, req->actual, req->length);
-+ if (req->status == -ECONNRESET) // Request was cancelled
-+ usb_ep_fifo_flush(ep);
-+
-+ /* Hold the lock while we update the request and buffer states */
-+ smp_wmb();
-+ spin_lock(&fsg->lock);
-+ fsg->intreq_busy = 0;
-+ bh->state = BUF_STATE_EMPTY;
-+ wakeup_thread(fsg);
-+ spin_unlock(&fsg->lock);
-+}
-+
-+#else
-+static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
-+{}
-+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Ep0 class-specific handlers. These always run in_irq. */
-+
-+#ifdef CONFIG_USB_FILE_STORAGE_TEST
-+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct usb_request *req = fsg->ep0req;
-+ static u8 cbi_reset_cmnd[6] = {
-+ SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
-+
-+ /* Error in command transfer? */
-+ if (req->status || req->length != req->actual ||
-+ req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
-+
-+ /* Not all controllers allow a protocol stall after
-+ * receiving control-out data, but we'll try anyway. */
-+ fsg_set_halt(fsg, fsg->ep0);
-+ return; // Wait for reset
-+ }
-+
-+ /* Is it the special reset command? */
-+ if (req->actual >= sizeof cbi_reset_cmnd &&
-+ memcmp(req->buf, cbi_reset_cmnd,
-+ sizeof cbi_reset_cmnd) == 0) {
-+
-+ /* Raise an exception to stop the current operation
-+ * and reinitialize our state. */
-+ DBG(fsg, "cbi reset request\n");
-+ raise_exception(fsg, FSG_STATE_RESET);
-+ return;
-+ }
-+
-+ VDBG(fsg, "CB[I] accept device-specific command\n");
-+ spin_lock(&fsg->lock);
-+
-+ /* Save the command for later */
-+ if (fsg->cbbuf_cmnd_size)
-+ WARNING(fsg, "CB[I] overwriting previous command\n");
-+ fsg->cbbuf_cmnd_size = req->actual;
-+ memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
-+
-+ wakeup_thread(fsg);
-+ spin_unlock(&fsg->lock);
-+}
-+
-+#else
-+static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{}
-+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-+
-+
-+static int class_setup_req(struct fsg_dev *fsg,
-+ const struct usb_ctrlrequest *ctrl)
-+{
-+ struct usb_request *req = fsg->ep0req;
-+ int value = -EOPNOTSUPP;
-+ u16 w_index = le16_to_cpu(ctrl->wIndex);
-+ u16 w_value = le16_to_cpu(ctrl->wValue);
-+ u16 w_length = le16_to_cpu(ctrl->wLength);
-+
-+ if (!fsg->config)
-+ return value;
-+
-+ /* Handle Bulk-only class-specific requests */
-+ if (transport_is_bbb()) {
-+ switch (ctrl->bRequest) {
-+
-+ case US_BULK_RESET_REQUEST:
-+ if (ctrl->bRequestType != (USB_DIR_OUT |
-+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-+ break;
-+ if (w_index != 0 || w_value != 0 || w_length != 0) {
-+ value = -EDOM;
-+ break;
-+ }
-+
-+ /* Raise an exception to stop the current operation
-+ * and reinitialize our state. */
-+ DBG(fsg, "bulk reset request\n");
-+ raise_exception(fsg, FSG_STATE_RESET);
-+ value = DELAYED_STATUS;
-+ break;
-+
-+ case US_BULK_GET_MAX_LUN:
-+ if (ctrl->bRequestType != (USB_DIR_IN |
-+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-+ break;
-+ if (w_index != 0 || w_value != 0 || w_length != 1) {
-+ value = -EDOM;
-+ break;
-+ }
-+ VDBG(fsg, "get max LUN\n");
-+ *(u8 *) req->buf = fsg->nluns - 1;
-+ value = 1;
-+ break;
-+ }
-+ }
-+
-+ /* Handle CBI class-specific requests */
-+ else {
-+ switch (ctrl->bRequest) {
-+
-+ case USB_CBI_ADSC_REQUEST:
-+ if (ctrl->bRequestType != (USB_DIR_OUT |
-+ USB_TYPE_CLASS | USB_RECIP_INTERFACE))
-+ break;
-+ if (w_index != 0 || w_value != 0) {
-+ value = -EDOM;
-+ break;
-+ }
-+ if (w_length > MAX_COMMAND_SIZE) {
-+ value = -EOVERFLOW;
-+ break;
-+ }
-+ value = w_length;
-+ fsg->ep0req->context = received_cbi_adsc;
-+ break;
-+ }
-+ }
-+
-+ if (value == -EOPNOTSUPP)
-+ VDBG(fsg,
-+ "unknown class-specific control req "
-+ "%02x.%02x v%04x i%04x l%u\n",
-+ ctrl->bRequestType, ctrl->bRequest,
-+ le16_to_cpu(ctrl->wValue), w_index, w_length);
-+ return value;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Ep0 standard request handlers. These always run in_irq. */
-+
-+static int standard_setup_req(struct fsg_dev *fsg,
-+ const struct usb_ctrlrequest *ctrl)
-+{
-+ struct usb_request *req = fsg->ep0req;
-+ int value = -EOPNOTSUPP;
-+ u16 w_index = le16_to_cpu(ctrl->wIndex);
-+ u16 w_value = le16_to_cpu(ctrl->wValue);
-+
-+ /* Usually this just stores reply data in the pre-allocated ep0 buffer,
-+ * but config change events will also reconfigure hardware. */
-+ switch (ctrl->bRequest) {
-+
-+ case USB_REQ_GET_DESCRIPTOR:
-+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-+ USB_RECIP_DEVICE))
-+ break;
-+ switch (w_value >> 8) {
-+
-+ case USB_DT_DEVICE:
-+ VDBG(fsg, "get device descriptor\n");
-+ device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
-+ value = sizeof device_desc;
-+ memcpy(req->buf, &device_desc, value);
-+ break;
-+ case USB_DT_DEVICE_QUALIFIER:
-+ VDBG(fsg, "get device qualifier\n");
-+ if (!gadget_is_dualspeed(fsg->gadget) ||
-+ fsg->gadget->speed == USB_SPEED_SUPER)
-+ break;
-+ /*
-+ * Assume ep0 uses the same maxpacket value for both
-+ * speeds
-+ */
-+ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
-+ value = sizeof dev_qualifier;
-+ memcpy(req->buf, &dev_qualifier, value);
-+ break;
-+
-+ case USB_DT_OTHER_SPEED_CONFIG:
-+ VDBG(fsg, "get other-speed config descriptor\n");
-+ if (!gadget_is_dualspeed(fsg->gadget) ||
-+ fsg->gadget->speed == USB_SPEED_SUPER)
-+ break;
-+ goto get_config;
-+ case USB_DT_CONFIG:
-+ VDBG(fsg, "get configuration descriptor\n");
-+get_config:
-+ value = populate_config_buf(fsg->gadget,
-+ req->buf,
-+ w_value >> 8,
-+ w_value & 0xff);
-+ break;
-+
-+ case USB_DT_STRING:
-+ VDBG(fsg, "get string descriptor\n");
-+
-+ /* wIndex == language code */
-+ value = usb_gadget_get_string(&fsg_stringtab,
-+ w_value & 0xff, req->buf);
-+ break;
-+
-+ case USB_DT_BOS:
-+ VDBG(fsg, "get bos descriptor\n");
-+
-+ if (gadget_is_superspeed(fsg->gadget))
-+ value = populate_bos(fsg, req->buf);
-+ break;
-+ }
-+
-+ break;
-+
-+ /* One config, two speeds */
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
-+ USB_RECIP_DEVICE))
-+ break;
-+ VDBG(fsg, "set configuration\n");
-+ if (w_value == CONFIG_VALUE || w_value == 0) {
-+ fsg->new_config = w_value;
-+
-+ /* Raise an exception to wipe out previous transaction
-+ * state (queued bufs, etc) and set the new config. */
-+ raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
-+ value = DELAYED_STATUS;
-+ }
-+ break;
-+ case USB_REQ_GET_CONFIGURATION:
-+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-+ USB_RECIP_DEVICE))
-+ break;
-+ VDBG(fsg, "get configuration\n");
-+ *(u8 *) req->buf = fsg->config;
-+ value = 1;
-+ break;
-+
-+ case USB_REQ_SET_INTERFACE:
-+ if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
-+ USB_RECIP_INTERFACE))
-+ break;
-+ if (fsg->config && w_index == 0) {
-+
-+ /* Raise an exception to wipe out previous transaction
-+ * state (queued bufs, etc) and install the new
-+ * interface altsetting. */
-+ raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
-+ value = DELAYED_STATUS;
-+ }
-+ break;
-+ case USB_REQ_GET_INTERFACE:
-+ if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
-+ USB_RECIP_INTERFACE))
-+ break;
-+ if (!fsg->config)
-+ break;
-+ if (w_index != 0) {
-+ value = -EDOM;
-+ break;
-+ }
-+ VDBG(fsg, "get interface\n");
-+ *(u8 *) req->buf = 0;
-+ value = 1;
-+ break;
-+
-+ default:
-+ VDBG(fsg,
-+ "unknown control req %02x.%02x v%04x i%04x l%u\n",
-+ ctrl->bRequestType, ctrl->bRequest,
-+ w_value, w_index, le16_to_cpu(ctrl->wLength));
-+ }
-+
-+ return value;
-+}
-+
-+
-+static int fsg_setup(struct usb_gadget *gadget,
-+ const struct usb_ctrlrequest *ctrl)
-+{
-+ struct fsg_dev *fsg = get_gadget_data(gadget);
-+ int rc;
-+ int w_length = le16_to_cpu(ctrl->wLength);
-+
-+ ++fsg->ep0_req_tag; // Record arrival of a new request
-+ fsg->ep0req->context = NULL;
-+ fsg->ep0req->length = 0;
-+ dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
-+
-+ if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
-+ rc = class_setup_req(fsg, ctrl);
-+ else
-+ rc = standard_setup_req(fsg, ctrl);
-+
-+ /* Respond with data/status or defer until later? */
-+ if (rc >= 0 && rc != DELAYED_STATUS) {
-+ rc = min(rc, w_length);
-+ fsg->ep0req->length = rc;
-+ fsg->ep0req->zero = rc < w_length;
-+ fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
-+ "ep0-in" : "ep0-out");
-+ rc = ep0_queue(fsg);
-+ }
-+
-+ /* Device either stalls (rc < 0) or reports success */
-+ return rc;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* All the following routines run in process context */
-+
-+
-+/* Use this for bulk or interrupt transfers, not ep0 */
-+static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
-+ struct usb_request *req, int *pbusy,
-+ enum fsg_buffer_state *state)
-+{
-+ int rc;
-+
-+ if (ep == fsg->bulk_in)
-+ dump_msg(fsg, "bulk-in", req->buf, req->length);
-+ else if (ep == fsg->intr_in)
-+ dump_msg(fsg, "intr-in", req->buf, req->length);
-+
-+ spin_lock_irq(&fsg->lock);
-+ *pbusy = 1;
-+ *state = BUF_STATE_BUSY;
-+ spin_unlock_irq(&fsg->lock);
-+ rc = usb_ep_queue(ep, req, GFP_KERNEL);
-+ if (rc != 0) {
-+ *pbusy = 0;
-+ *state = BUF_STATE_EMPTY;
-+
-+ /* We can't do much more than wait for a reset */
-+
-+ /* Note: currently the net2280 driver fails zero-length
-+ * submissions if DMA is enabled. */
-+ if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
-+ req->length == 0))
-+ WARNING(fsg, "error in submission: %s --> %d\n",
-+ ep->name, rc);
-+ }
-+}
-+
-+
-+static int sleep_thread(struct fsg_dev *fsg)
-+{
-+ int rc = 0;
-+
-+ /* Wait until a signal arrives or we are woken up */
-+ for (;;) {
-+ try_to_freeze();
-+ set_current_state(TASK_INTERRUPTIBLE);
-+ if (signal_pending(current)) {
-+ rc = -EINTR;
-+ break;
-+ }
-+ if (fsg->thread_wakeup_needed)
-+ break;
-+ schedule();
-+ }
-+ __set_current_state(TASK_RUNNING);
-+ fsg->thread_wakeup_needed = 0;
-+ return rc;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int do_read(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ u32 lba;
-+ struct fsg_buffhd *bh;
-+ int rc;
-+ u32 amount_left;
-+ loff_t file_offset, file_offset_tmp;
-+ unsigned int amount;
-+ ssize_t nread;
-+
-+ /* Get the starting Logical Block Address and check that it's
-+ * not too big */
-+ if (fsg->cmnd[0] == READ_6)
-+ lba = get_unaligned_be24(&fsg->cmnd[1]);
-+ else {
-+ lba = get_unaligned_be32(&fsg->cmnd[2]);
-+
-+ /* We allow DPO (Disable Page Out = don't save data in the
-+ * cache) and FUA (Force Unit Access = don't read from the
-+ * cache), but we don't implement them. */
-+ if ((fsg->cmnd[1] & ~0x18) != 0) {
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+ }
-+ if (lba >= curlun->num_sectors) {
-+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ return -EINVAL;
-+ }
-+ file_offset = ((loff_t) lba) << curlun->blkbits;
-+
-+ /* Carry out the file reads */
-+ amount_left = fsg->data_size_from_cmnd;
-+ if (unlikely(amount_left == 0))
-+ return -EIO; // No default reply
-+
-+ for (;;) {
-+
-+ /* Figure out how much we need to read:
-+ * Try to read the remaining amount.
-+ * But don't read more than the buffer size.
-+ * And don't try to read past the end of the file.
-+ */
-+ amount = min((unsigned int) amount_left, mod_data.buflen);
-+ amount = min((loff_t) amount,
-+ curlun->file_length - file_offset);
-+
-+ /* Wait for the next buffer to become available */
-+ bh = fsg->next_buffhd_to_fill;
-+ while (bh->state != BUF_STATE_EMPTY) {
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ /* If we were asked to read past the end of file,
-+ * end with an empty buffer. */
-+ if (amount == 0) {
-+ curlun->sense_data =
-+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ curlun->sense_data_info = file_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ bh->inreq->length = 0;
-+ bh->state = BUF_STATE_FULL;
-+ break;
-+ }
-+
-+ /* Perform the read */
-+ file_offset_tmp = file_offset;
-+ nread = vfs_read(curlun->filp,
-+ (char __user *) bh->buf,
-+ amount, &file_offset_tmp);
-+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-+ (unsigned long long) file_offset,
-+ (int) nread);
-+ if (signal_pending(current))
-+ return -EINTR;
-+
-+ if (nread < 0) {
-+ LDBG(curlun, "error in file read: %d\n",
-+ (int) nread);
-+ nread = 0;
-+ } else if (nread < amount) {
-+ LDBG(curlun, "partial file read: %d/%u\n",
-+ (int) nread, amount);
-+ nread = round_down(nread, curlun->blksize);
-+ }
-+ file_offset += nread;
-+ amount_left -= nread;
-+ fsg->residue -= nread;
-+
-+ /* Except at the end of the transfer, nread will be
-+ * equal to the buffer size, which is divisible by the
-+ * bulk-in maxpacket size.
-+ */
-+ bh->inreq->length = nread;
-+ bh->state = BUF_STATE_FULL;
-+
-+ /* If an error occurred, report it and its position */
-+ if (nread < amount) {
-+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-+ curlun->sense_data_info = file_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ break;
-+ }
-+
-+ if (amount_left == 0)
-+ break; // No more left to read
-+
-+ /* Send this buffer and go read some more */
-+ bh->inreq->zero = 0;
-+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
-+ &bh->inreq_busy, &bh->state);
-+ fsg->next_buffhd_to_fill = bh->next;
-+ }
-+
-+ return -EIO; // No default reply
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int do_write(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ u32 lba;
-+ struct fsg_buffhd *bh;
-+ int get_some_more;
-+ u32 amount_left_to_req, amount_left_to_write;
-+ loff_t usb_offset, file_offset, file_offset_tmp;
-+ unsigned int amount;
-+ ssize_t nwritten;
-+ int rc;
-+
-+ if (curlun->ro) {
-+ curlun->sense_data = SS_WRITE_PROTECTED;
-+ return -EINVAL;
-+ }
-+ spin_lock(&curlun->filp->f_lock);
-+ curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait
-+ spin_unlock(&curlun->filp->f_lock);
-+
-+ /* Get the starting Logical Block Address and check that it's
-+ * not too big */
-+ if (fsg->cmnd[0] == WRITE_6)
-+ lba = get_unaligned_be24(&fsg->cmnd[1]);
-+ else {
-+ lba = get_unaligned_be32(&fsg->cmnd[2]);
-+
-+ /* We allow DPO (Disable Page Out = don't save data in the
-+ * cache) and FUA (Force Unit Access = write directly to the
-+ * medium). We don't implement DPO; we implement FUA by
-+ * performing synchronous output. */
-+ if ((fsg->cmnd[1] & ~0x18) != 0) {
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+ /* FUA */
-+ if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
-+ spin_lock(&curlun->filp->f_lock);
-+ curlun->filp->f_flags |= O_DSYNC;
-+ spin_unlock(&curlun->filp->f_lock);
-+ }
-+ }
-+ if (lba >= curlun->num_sectors) {
-+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ return -EINVAL;
-+ }
-+
-+ /* Carry out the file writes */
-+ get_some_more = 1;
-+ file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
-+ amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
-+
-+ while (amount_left_to_write > 0) {
-+
-+ /* Queue a request for more data from the host */
-+ bh = fsg->next_buffhd_to_fill;
-+ if (bh->state == BUF_STATE_EMPTY && get_some_more) {
-+
-+ /* Figure out how much we want to get:
-+ * Try to get the remaining amount,
-+ * but not more than the buffer size.
-+ */
-+ amount = min(amount_left_to_req, mod_data.buflen);
-+
-+ /* Beyond the end of the backing file? */
-+ if (usb_offset >= curlun->file_length) {
-+ get_some_more = 0;
-+ curlun->sense_data =
-+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ curlun->sense_data_info = usb_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ continue;
-+ }
-+
-+ /* Get the next buffer */
-+ usb_offset += amount;
-+ fsg->usb_amount_left -= amount;
-+ amount_left_to_req -= amount;
-+ if (amount_left_to_req == 0)
-+ get_some_more = 0;
-+
-+ /* Except at the end of the transfer, amount will be
-+ * equal to the buffer size, which is divisible by
-+ * the bulk-out maxpacket size.
-+ */
-+ set_bulk_out_req_length(fsg, bh, amount);
-+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
-+ &bh->outreq_busy, &bh->state);
-+ fsg->next_buffhd_to_fill = bh->next;
-+ continue;
-+ }
-+
-+ /* Write the received data to the backing file */
-+ bh = fsg->next_buffhd_to_drain;
-+ if (bh->state == BUF_STATE_EMPTY && !get_some_more)
-+ break; // We stopped early
-+ if (bh->state == BUF_STATE_FULL) {
-+ smp_rmb();
-+ fsg->next_buffhd_to_drain = bh->next;
-+ bh->state = BUF_STATE_EMPTY;
-+
-+ /* Did something go wrong with the transfer? */
-+ if (bh->outreq->status != 0) {
-+ curlun->sense_data = SS_COMMUNICATION_FAILURE;
-+ curlun->sense_data_info = file_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ break;
-+ }
-+
-+ amount = bh->outreq->actual;
-+ if (curlun->file_length - file_offset < amount) {
-+ LERROR(curlun,
-+ "write %u @ %llu beyond end %llu\n",
-+ amount, (unsigned long long) file_offset,
-+ (unsigned long long) curlun->file_length);
-+ amount = curlun->file_length - file_offset;
-+ }
-+
-+ /* Don't accept excess data. The spec doesn't say
-+ * what to do in this case. We'll ignore the error.
-+ */
-+ amount = min(amount, bh->bulk_out_intended_length);
-+
-+ /* Don't write a partial block */
-+ amount = round_down(amount, curlun->blksize);
-+ if (amount == 0)
-+ goto empty_write;
-+
-+ /* Perform the write */
-+ file_offset_tmp = file_offset;
-+ nwritten = vfs_write(curlun->filp,
-+ (char __user *) bh->buf,
-+ amount, &file_offset_tmp);
-+ VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
-+ (unsigned long long) file_offset,
-+ (int) nwritten);
-+ if (signal_pending(current))
-+ return -EINTR; // Interrupted!
-+
-+ if (nwritten < 0) {
-+ LDBG(curlun, "error in file write: %d\n",
-+ (int) nwritten);
-+ nwritten = 0;
-+ } else if (nwritten < amount) {
-+ LDBG(curlun, "partial file write: %d/%u\n",
-+ (int) nwritten, amount);
-+ nwritten = round_down(nwritten, curlun->blksize);
-+ }
-+ file_offset += nwritten;
-+ amount_left_to_write -= nwritten;
-+ fsg->residue -= nwritten;
-+
-+ /* If an error occurred, report it and its position */
-+ if (nwritten < amount) {
-+ curlun->sense_data = SS_WRITE_ERROR;
-+ curlun->sense_data_info = file_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ break;
-+ }
-+
-+ empty_write:
-+ /* Did the host decide to stop early? */
-+ if (bh->outreq->actual < bh->bulk_out_intended_length) {
-+ fsg->short_packet_received = 1;
-+ break;
-+ }
-+ continue;
-+ }
-+
-+ /* Wait for something to happen */
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ return -EIO; // No default reply
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int do_synchronize_cache(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ int rc;
-+
-+ /* We ignore the requested LBA and write out all file's
-+ * dirty data buffers. */
-+ rc = fsg_lun_fsync_sub(curlun);
-+ if (rc)
-+ curlun->sense_data = SS_WRITE_ERROR;
-+ return 0;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void invalidate_sub(struct fsg_lun *curlun)
-+{
-+ struct file *filp = curlun->filp;
-+ struct inode *inode = filp->f_path.dentry->d_inode;
-+ unsigned long rc;
-+
-+ rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
-+ VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
-+}
-+
-+static int do_verify(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ u32 lba;
-+ u32 verification_length;
-+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
-+ loff_t file_offset, file_offset_tmp;
-+ u32 amount_left;
-+ unsigned int amount;
-+ ssize_t nread;
-+
-+ /* Get the starting Logical Block Address and check that it's
-+ * not too big */
-+ lba = get_unaligned_be32(&fsg->cmnd[2]);
-+ if (lba >= curlun->num_sectors) {
-+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ return -EINVAL;
-+ }
-+
-+ /* We allow DPO (Disable Page Out = don't save data in the
-+ * cache) but we don't implement it. */
-+ if ((fsg->cmnd[1] & ~0x10) != 0) {
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+
-+ verification_length = get_unaligned_be16(&fsg->cmnd[7]);
-+ if (unlikely(verification_length == 0))
-+ return -EIO; // No default reply
-+
-+ /* Prepare to carry out the file verify */
-+ amount_left = verification_length << curlun->blkbits;
-+ file_offset = ((loff_t) lba) << curlun->blkbits;
-+
-+ /* Write out all the dirty buffers before invalidating them */
-+ fsg_lun_fsync_sub(curlun);
-+ if (signal_pending(current))
-+ return -EINTR;
-+
-+ invalidate_sub(curlun);
-+ if (signal_pending(current))
-+ return -EINTR;
-+
-+ /* Just try to read the requested blocks */
-+ while (amount_left > 0) {
-+
-+ /* Figure out how much we need to read:
-+ * Try to read the remaining amount, but not more than
-+ * the buffer size.
-+ * And don't try to read past the end of the file.
-+ */
-+ amount = min((unsigned int) amount_left, mod_data.buflen);
-+ amount = min((loff_t) amount,
-+ curlun->file_length - file_offset);
-+ if (amount == 0) {
-+ curlun->sense_data =
-+ SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ curlun->sense_data_info = file_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ break;
-+ }
-+
-+ /* Perform the read */
-+ file_offset_tmp = file_offset;
-+ nread = vfs_read(curlun->filp,
-+ (char __user *) bh->buf,
-+ amount, &file_offset_tmp);
-+ VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
-+ (unsigned long long) file_offset,
-+ (int) nread);
-+ if (signal_pending(current))
-+ return -EINTR;
-+
-+ if (nread < 0) {
-+ LDBG(curlun, "error in file verify: %d\n",
-+ (int) nread);
-+ nread = 0;
-+ } else if (nread < amount) {
-+ LDBG(curlun, "partial file verify: %d/%u\n",
-+ (int) nread, amount);
-+ nread = round_down(nread, curlun->blksize);
-+ }
-+ if (nread == 0) {
-+ curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
-+ curlun->sense_data_info = file_offset >> curlun->blkbits;
-+ curlun->info_valid = 1;
-+ break;
-+ }
-+ file_offset += nread;
-+ amount_left -= nread;
-+ }
-+ return 0;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ u8 *buf = (u8 *) bh->buf;
-+
-+ static char vendor_id[] = "Linux ";
-+ static char product_disk_id[] = "File-Stor Gadget";
-+ static char product_cdrom_id[] = "File-CD Gadget ";
-+
-+ if (!fsg->curlun) { // Unsupported LUNs are okay
-+ fsg->bad_lun_okay = 1;
-+ memset(buf, 0, 36);
-+ buf[0] = 0x7f; // Unsupported, no device-type
-+ buf[4] = 31; // Additional length
-+ return 36;
-+ }
-+
-+ memset(buf, 0, 8);
-+ buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
-+ if (mod_data.removable)
-+ buf[1] = 0x80;
-+ buf[2] = 2; // ANSI SCSI level 2
-+ buf[3] = 2; // SCSI-2 INQUIRY data format
-+ buf[4] = 31; // Additional length
-+ // No special options
-+ sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
-+ (mod_data.cdrom ? product_cdrom_id :
-+ product_disk_id),
-+ mod_data.release);
-+ return 36;
-+}
-+
-+
-+static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ u8 *buf = (u8 *) bh->buf;
-+ u32 sd, sdinfo;
-+ int valid;
-+
-+ /*
-+ * From the SCSI-2 spec., section 7.9 (Unit attention condition):
-+ *
-+ * If a REQUEST SENSE command is received from an initiator
-+ * with a pending unit attention condition (before the target
-+ * generates the contingent allegiance condition), then the
-+ * target shall either:
-+ * a) report any pending sense data and preserve the unit
-+ * attention condition on the logical unit, or,
-+ * b) report the unit attention condition, may discard any
-+ * pending sense data, and clear the unit attention
-+ * condition on the logical unit for that initiator.
-+ *
-+ * FSG normally uses option a); enable this code to use option b).
-+ */
-+#if 0
-+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
-+ curlun->sense_data = curlun->unit_attention_data;
-+ curlun->unit_attention_data = SS_NO_SENSE;
-+ }
-+#endif
-+
-+ if (!curlun) { // Unsupported LUNs are okay
-+ fsg->bad_lun_okay = 1;
-+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-+ sdinfo = 0;
-+ valid = 0;
-+ } else {
-+ sd = curlun->sense_data;
-+ sdinfo = curlun->sense_data_info;
-+ valid = curlun->info_valid << 7;
-+ curlun->sense_data = SS_NO_SENSE;
-+ curlun->sense_data_info = 0;
-+ curlun->info_valid = 0;
-+ }
-+
-+ memset(buf, 0, 18);
-+ buf[0] = valid | 0x70; // Valid, current error
-+ buf[2] = SK(sd);
-+ put_unaligned_be32(sdinfo, &buf[3]); /* Sense information */
-+ buf[7] = 18 - 8; // Additional sense length
-+ buf[12] = ASC(sd);
-+ buf[13] = ASCQ(sd);
-+ return 18;
-+}
-+
-+
-+static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
-+ int pmi = fsg->cmnd[8];
-+ u8 *buf = (u8 *) bh->buf;
-+
-+ /* Check the PMI and LBA fields */
-+ if (pmi > 1 || (pmi == 0 && lba != 0)) {
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+
-+ put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
-+ /* Max logical block */
-+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
-+ return 8;
-+}
-+
-+
-+static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ int msf = fsg->cmnd[1] & 0x02;
-+ u32 lba = get_unaligned_be32(&fsg->cmnd[2]);
-+ u8 *buf = (u8 *) bh->buf;
-+
-+ if ((fsg->cmnd[1] & ~0x02) != 0) { /* Mask away MSF */
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+ if (lba >= curlun->num_sectors) {
-+ curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
-+ return -EINVAL;
-+ }
-+
-+ memset(buf, 0, 8);
-+ buf[0] = 0x01; /* 2048 bytes of user data, rest is EC */
-+ store_cdrom_address(&buf[4], msf, lba);
-+ return 8;
-+}
-+
-+
-+static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ int msf = fsg->cmnd[1] & 0x02;
-+ int start_track = fsg->cmnd[6];
-+ u8 *buf = (u8 *) bh->buf;
-+
-+ if ((fsg->cmnd[1] & ~0x02) != 0 || /* Mask away MSF */
-+ start_track > 1) {
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+
-+ memset(buf, 0, 20);
-+ buf[1] = (20-2); /* TOC data length */
-+ buf[2] = 1; /* First track number */
-+ buf[3] = 1; /* Last track number */
-+ buf[5] = 0x16; /* Data track, copying allowed */
-+ buf[6] = 0x01; /* Only track is number 1 */
-+ store_cdrom_address(&buf[8], msf, 0);
-+
-+ buf[13] = 0x16; /* Lead-out track is data */
-+ buf[14] = 0xAA; /* Lead-out track number */
-+ store_cdrom_address(&buf[16], msf, curlun->num_sectors);
-+ return 20;
-+}
-+
-+
-+static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ int mscmnd = fsg->cmnd[0];
-+ u8 *buf = (u8 *) bh->buf;
-+ u8 *buf0 = buf;
-+ int pc, page_code;
-+ int changeable_values, all_pages;
-+ int valid_page = 0;
-+ int len, limit;
-+
-+ if ((fsg->cmnd[1] & ~0x08) != 0) { // Mask away DBD
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+ pc = fsg->cmnd[2] >> 6;
-+ page_code = fsg->cmnd[2] & 0x3f;
-+ if (pc == 3) {
-+ curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
-+ return -EINVAL;
-+ }
-+ changeable_values = (pc == 1);
-+ all_pages = (page_code == 0x3f);
-+
-+ /* Write the mode parameter header. Fixed values are: default
-+ * medium type, no cache control (DPOFUA), and no block descriptors.
-+ * The only variable value is the WriteProtect bit. We will fill in
-+ * the mode data length later. */
-+ memset(buf, 0, 8);
-+ if (mscmnd == MODE_SENSE) {
-+ buf[2] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
-+ buf += 4;
-+ limit = 255;
-+ } else { // MODE_SENSE_10
-+ buf[3] = (curlun->ro ? 0x80 : 0x00); // WP, DPOFUA
-+ buf += 8;
-+ limit = 65535; // Should really be mod_data.buflen
-+ }
-+
-+ /* No block descriptors */
-+
-+ /* The mode pages, in numerical order. The only page we support
-+ * is the Caching page. */
-+ if (page_code == 0x08 || all_pages) {
-+ valid_page = 1;
-+ buf[0] = 0x08; // Page code
-+ buf[1] = 10; // Page length
-+ memset(buf+2, 0, 10); // None of the fields are changeable
-+
-+ if (!changeable_values) {
-+ buf[2] = 0x04; // Write cache enable,
-+ // Read cache not disabled
-+ // No cache retention priorities
-+ put_unaligned_be16(0xffff, &buf[4]);
-+ /* Don't disable prefetch */
-+ /* Minimum prefetch = 0 */
-+ put_unaligned_be16(0xffff, &buf[8]);
-+ /* Maximum prefetch */
-+ put_unaligned_be16(0xffff, &buf[10]);
-+ /* Maximum prefetch ceiling */
-+ }
-+ buf += 12;
-+ }
-+
-+ /* Check that a valid page was requested and the mode data length
-+ * isn't too long. */
-+ len = buf - buf0;
-+ if (!valid_page || len > limit) {
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+
-+ /* Store the mode data length */
-+ if (mscmnd == MODE_SENSE)
-+ buf0[0] = len - 1;
-+ else
-+ put_unaligned_be16(len - 2, buf0);
-+ return len;
-+}
-+
-+
-+static int do_start_stop(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ int loej, start;
-+
-+ if (!mod_data.removable) {
-+ curlun->sense_data = SS_INVALID_COMMAND;
-+ return -EINVAL;
-+ }
-+
-+ // int immed = fsg->cmnd[1] & 0x01;
-+ loej = fsg->cmnd[4] & 0x02;
-+ start = fsg->cmnd[4] & 0x01;
-+
-+#ifdef CONFIG_USB_FILE_STORAGE_TEST
-+ if ((fsg->cmnd[1] & ~0x01) != 0 || // Mask away Immed
-+ (fsg->cmnd[4] & ~0x03) != 0) { // Mask LoEj, Start
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+
-+ if (!start) {
-+
-+ /* Are we allowed to unload the media? */
-+ if (curlun->prevent_medium_removal) {
-+ LDBG(curlun, "unload attempt prevented\n");
-+ curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
-+ return -EINVAL;
-+ }
-+ if (loej) { // Simulate an unload/eject
-+ up_read(&fsg->filesem);
-+ down_write(&fsg->filesem);
-+ fsg_lun_close(curlun);
-+ up_write(&fsg->filesem);
-+ down_read(&fsg->filesem);
-+ }
-+ } else {
-+
-+ /* Our emulation doesn't support mounting; the medium is
-+ * available for use as soon as it is loaded. */
-+ if (!fsg_lun_is_open(curlun)) {
-+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
-+ return -EINVAL;
-+ }
-+ }
-+#endif
-+ return 0;
-+}
-+
-+
-+static int do_prevent_allow(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ int prevent;
-+
-+ if (!mod_data.removable) {
-+ curlun->sense_data = SS_INVALID_COMMAND;
-+ return -EINVAL;
-+ }
-+
-+ prevent = fsg->cmnd[4] & 0x01;
-+ if ((fsg->cmnd[4] & ~0x01) != 0) { // Mask away Prevent
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+
-+ if (curlun->prevent_medium_removal && !prevent)
-+ fsg_lun_fsync_sub(curlun);
-+ curlun->prevent_medium_removal = prevent;
-+ return 0;
-+}
-+
-+
-+static int do_read_format_capacities(struct fsg_dev *fsg,
-+ struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ u8 *buf = (u8 *) bh->buf;
-+
-+ buf[0] = buf[1] = buf[2] = 0;
-+ buf[3] = 8; // Only the Current/Maximum Capacity Descriptor
-+ buf += 4;
-+
-+ put_unaligned_be32(curlun->num_sectors, &buf[0]);
-+ /* Number of blocks */
-+ put_unaligned_be32(curlun->blksize, &buf[4]); /* Block length */
-+ buf[4] = 0x02; /* Current capacity */
-+ return 12;
-+}
-+
-+
-+static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+
-+ /* We don't support MODE SELECT */
-+ curlun->sense_data = SS_INVALID_COMMAND;
-+ return -EINVAL;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
-+{
-+ int rc;
-+
-+ rc = fsg_set_halt(fsg, fsg->bulk_in);
-+ if (rc == -EAGAIN)
-+ VDBG(fsg, "delayed bulk-in endpoint halt\n");
-+ while (rc != 0) {
-+ if (rc != -EAGAIN) {
-+ WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
-+ rc = 0;
-+ break;
-+ }
-+
-+ /* Wait for a short time and then try again */
-+ if (msleep_interruptible(100) != 0)
-+ return -EINTR;
-+ rc = usb_ep_set_halt(fsg->bulk_in);
-+ }
-+ return rc;
-+}
-+
-+static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
-+{
-+ int rc;
-+
-+ DBG(fsg, "bulk-in set wedge\n");
-+ rc = usb_ep_set_wedge(fsg->bulk_in);
-+ if (rc == -EAGAIN)
-+ VDBG(fsg, "delayed bulk-in endpoint wedge\n");
-+ while (rc != 0) {
-+ if (rc != -EAGAIN) {
-+ WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
-+ rc = 0;
-+ break;
-+ }
-+
-+ /* Wait for a short time and then try again */
-+ if (msleep_interruptible(100) != 0)
-+ return -EINTR;
-+ rc = usb_ep_set_wedge(fsg->bulk_in);
-+ }
-+ return rc;
-+}
-+
-+static int throw_away_data(struct fsg_dev *fsg)
-+{
-+ struct fsg_buffhd *bh;
-+ u32 amount;
-+ int rc;
-+
-+ while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
-+ fsg->usb_amount_left > 0) {
-+
-+ /* Throw away the data in a filled buffer */
-+ if (bh->state == BUF_STATE_FULL) {
-+ smp_rmb();
-+ bh->state = BUF_STATE_EMPTY;
-+ fsg->next_buffhd_to_drain = bh->next;
-+
-+ /* A short packet or an error ends everything */
-+ if (bh->outreq->actual < bh->bulk_out_intended_length ||
-+ bh->outreq->status != 0) {
-+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-+ return -EINTR;
-+ }
-+ continue;
-+ }
-+
-+ /* Try to submit another request if we need one */
-+ bh = fsg->next_buffhd_to_fill;
-+ if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
-+ amount = min(fsg->usb_amount_left,
-+ (u32) mod_data.buflen);
-+
-+ /* Except at the end of the transfer, amount will be
-+ * equal to the buffer size, which is divisible by
-+ * the bulk-out maxpacket size.
-+ */
-+ set_bulk_out_req_length(fsg, bh, amount);
-+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
-+ &bh->outreq_busy, &bh->state);
-+ fsg->next_buffhd_to_fill = bh->next;
-+ fsg->usb_amount_left -= amount;
-+ continue;
-+ }
-+
-+ /* Otherwise wait for something to happen */
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+ return 0;
-+}
-+
-+
-+static int finish_reply(struct fsg_dev *fsg)
-+{
-+ struct fsg_buffhd *bh = fsg->next_buffhd_to_fill;
-+ int rc = 0;
-+
-+ switch (fsg->data_dir) {
-+ case DATA_DIR_NONE:
-+ break; // Nothing to send
-+
-+ /* If we don't know whether the host wants to read or write,
-+ * this must be CB or CBI with an unknown command. We mustn't
-+ * try to send or receive any data. So stall both bulk pipes
-+ * if we can and wait for a reset. */
-+ case DATA_DIR_UNKNOWN:
-+ if (mod_data.can_stall) {
-+ fsg_set_halt(fsg, fsg->bulk_out);
-+ rc = halt_bulk_in_endpoint(fsg);
-+ }
-+ break;
-+
-+ /* All but the last buffer of data must have already been sent */
-+ case DATA_DIR_TO_HOST:
-+ if (fsg->data_size == 0)
-+ ; // Nothing to send
-+
-+ /* If there's no residue, simply send the last buffer */
-+ else if (fsg->residue == 0) {
-+ bh->inreq->zero = 0;
-+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
-+ &bh->inreq_busy, &bh->state);
-+ fsg->next_buffhd_to_fill = bh->next;
-+ }
-+
-+ /* There is a residue. For CB and CBI, simply mark the end
-+ * of the data with a short packet. However, if we are
-+ * allowed to stall, there was no data at all (residue ==
-+ * data_size), and the command failed (invalid LUN or
-+ * sense data is set), then halt the bulk-in endpoint
-+ * instead. */
-+ else if (!transport_is_bbb()) {
-+ if (mod_data.can_stall &&
-+ fsg->residue == fsg->data_size &&
-+ (!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
-+ bh->state = BUF_STATE_EMPTY;
-+ rc = halt_bulk_in_endpoint(fsg);
-+ } else {
-+ bh->inreq->zero = 1;
-+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
-+ &bh->inreq_busy, &bh->state);
-+ fsg->next_buffhd_to_fill = bh->next;
-+ }
-+ }
-+
-+ /*
-+ * For Bulk-only, mark the end of the data with a short
-+ * packet. If we are allowed to stall, halt the bulk-in
-+ * endpoint. (Note: This violates the Bulk-Only Transport
-+ * specification, which requires us to pad the data if we
-+ * don't halt the endpoint. Presumably nobody will mind.)
-+ */
-+ else {
-+ bh->inreq->zero = 1;
-+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
-+ &bh->inreq_busy, &bh->state);
-+ fsg->next_buffhd_to_fill = bh->next;
-+ if (mod_data.can_stall)
-+ rc = halt_bulk_in_endpoint(fsg);
-+ }
-+ break;
-+
-+ /* We have processed all we want from the data the host has sent.
-+ * There may still be outstanding bulk-out requests. */
-+ case DATA_DIR_FROM_HOST:
-+ if (fsg->residue == 0)
-+ ; // Nothing to receive
-+
-+ /* Did the host stop sending unexpectedly early? */
-+ else if (fsg->short_packet_received) {
-+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-+ rc = -EINTR;
-+ }
-+
-+ /* We haven't processed all the incoming data. Even though
-+ * we may be allowed to stall, doing so would cause a race.
-+ * The controller may already have ACK'ed all the remaining
-+ * bulk-out packets, in which case the host wouldn't see a
-+ * STALL. Not realizing the endpoint was halted, it wouldn't
-+ * clear the halt -- leading to problems later on. */
-+#if 0
-+ else if (mod_data.can_stall) {
-+ fsg_set_halt(fsg, fsg->bulk_out);
-+ raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
-+ rc = -EINTR;
-+ }
-+#endif
-+
-+ /* We can't stall. Read in the excess data and throw it
-+ * all away. */
-+ else
-+ rc = throw_away_data(fsg);
-+ break;
-+ }
-+ return rc;
-+}
-+
-+
-+static int send_status(struct fsg_dev *fsg)
-+{
-+ struct fsg_lun *curlun = fsg->curlun;
-+ struct fsg_buffhd *bh;
-+ int rc;
-+ u8 status = US_BULK_STAT_OK;
-+ u32 sd, sdinfo = 0;
-+
-+ /* Wait for the next buffer to become available */
-+ bh = fsg->next_buffhd_to_fill;
-+ while (bh->state != BUF_STATE_EMPTY) {
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ if (curlun) {
-+ sd = curlun->sense_data;
-+ sdinfo = curlun->sense_data_info;
-+ } else if (fsg->bad_lun_okay)
-+ sd = SS_NO_SENSE;
-+ else
-+ sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
-+
-+ if (fsg->phase_error) {
-+ DBG(fsg, "sending phase-error status\n");
-+ status = US_BULK_STAT_PHASE;
-+ sd = SS_INVALID_COMMAND;
-+ } else if (sd != SS_NO_SENSE) {
-+ DBG(fsg, "sending command-failure status\n");
-+ status = US_BULK_STAT_FAIL;
-+ VDBG(fsg, " sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
-+ " info x%x\n",
-+ SK(sd), ASC(sd), ASCQ(sd), sdinfo);
-+ }
-+
-+ if (transport_is_bbb()) {
-+ struct bulk_cs_wrap *csw = bh->buf;
-+
-+ /* Store and send the Bulk-only CSW */
-+ csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
-+ csw->Tag = fsg->tag;
-+ csw->Residue = cpu_to_le32(fsg->residue);
-+ csw->Status = status;
-+
-+ bh->inreq->length = US_BULK_CS_WRAP_LEN;
-+ bh->inreq->zero = 0;
-+ start_transfer(fsg, fsg->bulk_in, bh->inreq,
-+ &bh->inreq_busy, &bh->state);
-+
-+ } else if (mod_data.transport_type == USB_PR_CB) {
-+
-+ /* Control-Bulk transport has no status phase! */
-+ return 0;
-+
-+ } else { // USB_PR_CBI
-+ struct interrupt_data *buf = bh->buf;
-+
-+ /* Store and send the Interrupt data. UFI sends the ASC
-+ * and ASCQ bytes. Everything else sends a Type (which
-+ * is always 0) and the status Value. */
-+ if (mod_data.protocol_type == USB_SC_UFI) {
-+ buf->bType = ASC(sd);
-+ buf->bValue = ASCQ(sd);
-+ } else {
-+ buf->bType = 0;
-+ buf->bValue = status;
-+ }
-+ fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
-+
-+ fsg->intr_buffhd = bh; // Point to the right buffhd
-+ fsg->intreq->buf = bh->inreq->buf;
-+ fsg->intreq->context = bh;
-+ start_transfer(fsg, fsg->intr_in, fsg->intreq,
-+ &fsg->intreq_busy, &bh->state);
-+ }
-+
-+ fsg->next_buffhd_to_fill = bh->next;
-+ return 0;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Check whether the command is properly formed and whether its data size
-+ * and direction agree with the values we already have. */
-+static int check_command(struct fsg_dev *fsg, int cmnd_size,
-+ enum data_direction data_dir, unsigned int mask,
-+ int needs_medium, const char *name)
-+{
-+ int i;
-+ int lun = fsg->cmnd[1] >> 5;
-+ static const char dirletter[4] = {'u', 'o', 'i', 'n'};
-+ char hdlen[20];
-+ struct fsg_lun *curlun;
-+
-+ /* Adjust the expected cmnd_size for protocol encapsulation padding.
-+ * Transparent SCSI doesn't pad. */
-+ if (protocol_is_scsi())
-+ ;
-+
-+ /* There's some disagreement as to whether RBC pads commands or not.
-+ * We'll play it safe and accept either form. */
-+ else if (mod_data.protocol_type == USB_SC_RBC) {
-+ if (fsg->cmnd_size == 12)
-+ cmnd_size = 12;
-+
-+ /* All the other protocols pad to 12 bytes */
-+ } else
-+ cmnd_size = 12;
-+
-+ hdlen[0] = 0;
-+ if (fsg->data_dir != DATA_DIR_UNKNOWN)
-+ sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
-+ fsg->data_size);
-+ VDBG(fsg, "SCSI command: %s; Dc=%d, D%c=%u; Hc=%d%s\n",
-+ name, cmnd_size, dirletter[(int) data_dir],
-+ fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
-+
-+ /* We can't reply at all until we know the correct data direction
-+ * and size. */
-+ if (fsg->data_size_from_cmnd == 0)
-+ data_dir = DATA_DIR_NONE;
-+ if (fsg->data_dir == DATA_DIR_UNKNOWN) { // CB or CBI
-+ fsg->data_dir = data_dir;
-+ fsg->data_size = fsg->data_size_from_cmnd;
-+
-+ } else { // Bulk-only
-+ if (fsg->data_size < fsg->data_size_from_cmnd) {
-+
-+ /* Host data size < Device data size is a phase error.
-+ * Carry out the command, but only transfer as much
-+ * as we are allowed. */
-+ fsg->data_size_from_cmnd = fsg->data_size;
-+ fsg->phase_error = 1;
-+ }
-+ }
-+ fsg->residue = fsg->usb_amount_left = fsg->data_size;
-+
-+ /* Conflicting data directions is a phase error */
-+ if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
-+ fsg->phase_error = 1;
-+ return -EINVAL;
-+ }
-+
-+ /* Verify the length of the command itself */
-+ if (cmnd_size != fsg->cmnd_size) {
-+
-+ /* Special case workaround: There are plenty of buggy SCSI
-+ * implementations. Many have issues with cbw->Length
-+ * field passing a wrong command size. For those cases we
-+ * always try to work around the problem by using the length
-+ * sent by the host side provided it is at least as large
-+ * as the correct command length.
-+ * Examples of such cases would be MS-Windows, which issues
-+ * REQUEST SENSE with cbw->Length == 12 where it should
-+ * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
-+ * REQUEST SENSE with cbw->Length == 10 where it should
-+ * be 6 as well.
-+ */
-+ if (cmnd_size <= fsg->cmnd_size) {
-+ DBG(fsg, "%s is buggy! Expected length %d "
-+ "but we got %d\n", name,
-+ cmnd_size, fsg->cmnd_size);
-+ cmnd_size = fsg->cmnd_size;
-+ } else {
-+ fsg->phase_error = 1;
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* Check that the LUN values are consistent */
-+ if (transport_is_bbb()) {
-+ if (fsg->lun != lun)
-+ DBG(fsg, "using LUN %d from CBW, "
-+ "not LUN %d from CDB\n",
-+ fsg->lun, lun);
-+ }
-+
-+ /* Check the LUN */
-+ curlun = fsg->curlun;
-+ if (curlun) {
-+ if (fsg->cmnd[0] != REQUEST_SENSE) {
-+ curlun->sense_data = SS_NO_SENSE;
-+ curlun->sense_data_info = 0;
-+ curlun->info_valid = 0;
-+ }
-+ } else {
-+ fsg->bad_lun_okay = 0;
-+
-+ /* INQUIRY and REQUEST SENSE commands are explicitly allowed
-+ * to use unsupported LUNs; all others may not. */
-+ if (fsg->cmnd[0] != INQUIRY &&
-+ fsg->cmnd[0] != REQUEST_SENSE) {
-+ DBG(fsg, "unsupported LUN %d\n", fsg->lun);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* If a unit attention condition exists, only INQUIRY and
-+ * REQUEST SENSE commands are allowed; anything else must fail. */
-+ if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
-+ fsg->cmnd[0] != INQUIRY &&
-+ fsg->cmnd[0] != REQUEST_SENSE) {
-+ curlun->sense_data = curlun->unit_attention_data;
-+ curlun->unit_attention_data = SS_NO_SENSE;
-+ return -EINVAL;
-+ }
-+
-+ /* Check that only command bytes listed in the mask are non-zero */
-+ fsg->cmnd[1] &= 0x1f; // Mask away the LUN
-+ for (i = 1; i < cmnd_size; ++i) {
-+ if (fsg->cmnd[i] && !(mask & (1 << i))) {
-+ if (curlun)
-+ curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* If the medium isn't mounted and the command needs to access
-+ * it, return an error. */
-+ if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
-+ curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/* wrapper of check_command for data size in blocks handling */
-+static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
-+ enum data_direction data_dir, unsigned int mask,
-+ int needs_medium, const char *name)
-+{
-+ if (fsg->curlun)
-+ fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
-+ return check_command(fsg, cmnd_size, data_dir,
-+ mask, needs_medium, name);
-+}
-+
-+static int do_scsi_command(struct fsg_dev *fsg)
-+{
-+ struct fsg_buffhd *bh;
-+ int rc;
-+ int reply = -EINVAL;
-+ int i;
-+ static char unknown[16];
-+
-+ dump_cdb(fsg);
-+
-+ /* Wait for the next buffer to become available for data or status */
-+ bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
-+ while (bh->state != BUF_STATE_EMPTY) {
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+ fsg->phase_error = 0;
-+ fsg->short_packet_received = 0;
-+
-+ down_read(&fsg->filesem); // We're using the backing file
-+ switch (fsg->cmnd[0]) {
-+
-+ case INQUIRY:
-+ fsg->data_size_from_cmnd = fsg->cmnd[4];
-+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-+ (1<<4), 0,
-+ "INQUIRY")) == 0)
-+ reply = do_inquiry(fsg, bh);
-+ break;
-+
-+ case MODE_SELECT:
-+ fsg->data_size_from_cmnd = fsg->cmnd[4];
-+ if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
-+ (1<<1) | (1<<4), 0,
-+ "MODE SELECT(6)")) == 0)
-+ reply = do_mode_select(fsg, bh);
-+ break;
-+
-+ case MODE_SELECT_10:
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
-+ (1<<1) | (3<<7), 0,
-+ "MODE SELECT(10)")) == 0)
-+ reply = do_mode_select(fsg, bh);
-+ break;
-+
-+ case MODE_SENSE:
-+ fsg->data_size_from_cmnd = fsg->cmnd[4];
-+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-+ (1<<1) | (1<<2) | (1<<4), 0,
-+ "MODE SENSE(6)")) == 0)
-+ reply = do_mode_sense(fsg, bh);
-+ break;
-+
-+ case MODE_SENSE_10:
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-+ (1<<1) | (1<<2) | (3<<7), 0,
-+ "MODE SENSE(10)")) == 0)
-+ reply = do_mode_sense(fsg, bh);
-+ break;
-+
-+ case ALLOW_MEDIUM_REMOVAL:
-+ fsg->data_size_from_cmnd = 0;
-+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
-+ (1<<4), 0,
-+ "PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
-+ reply = do_prevent_allow(fsg);
-+ break;
-+
-+ case READ_6:
-+ i = fsg->cmnd[4];
-+ fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
-+ if ((reply = check_command_size_in_blocks(fsg, 6,
-+ DATA_DIR_TO_HOST,
-+ (7<<1) | (1<<4), 1,
-+ "READ(6)")) == 0)
-+ reply = do_read(fsg);
-+ break;
-+
-+ case READ_10:
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command_size_in_blocks(fsg, 10,
-+ DATA_DIR_TO_HOST,
-+ (1<<1) | (0xf<<2) | (3<<7), 1,
-+ "READ(10)")) == 0)
-+ reply = do_read(fsg);
-+ break;
-+
-+ case READ_12:
-+ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
-+ if ((reply = check_command_size_in_blocks(fsg, 12,
-+ DATA_DIR_TO_HOST,
-+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
-+ "READ(12)")) == 0)
-+ reply = do_read(fsg);
-+ break;
-+
-+ case READ_CAPACITY:
-+ fsg->data_size_from_cmnd = 8;
-+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-+ (0xf<<2) | (1<<8), 1,
-+ "READ CAPACITY")) == 0)
-+ reply = do_read_capacity(fsg, bh);
-+ break;
-+
-+ case READ_HEADER:
-+ if (!mod_data.cdrom)
-+ goto unknown_cmnd;
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-+ (3<<7) | (0x1f<<1), 1,
-+ "READ HEADER")) == 0)
-+ reply = do_read_header(fsg, bh);
-+ break;
-+
-+ case READ_TOC:
-+ if (!mod_data.cdrom)
-+ goto unknown_cmnd;
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-+ (7<<6) | (1<<1), 1,
-+ "READ TOC")) == 0)
-+ reply = do_read_toc(fsg, bh);
-+ break;
-+
-+ case READ_FORMAT_CAPACITIES:
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
-+ (3<<7), 1,
-+ "READ FORMAT CAPACITIES")) == 0)
-+ reply = do_read_format_capacities(fsg, bh);
-+ break;
-+
-+ case REQUEST_SENSE:
-+ fsg->data_size_from_cmnd = fsg->cmnd[4];
-+ if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
-+ (1<<4), 0,
-+ "REQUEST SENSE")) == 0)
-+ reply = do_request_sense(fsg, bh);
-+ break;
-+
-+ case START_STOP:
-+ fsg->data_size_from_cmnd = 0;
-+ if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
-+ (1<<1) | (1<<4), 0,
-+ "START-STOP UNIT")) == 0)
-+ reply = do_start_stop(fsg);
-+ break;
-+
-+ case SYNCHRONIZE_CACHE:
-+ fsg->data_size_from_cmnd = 0;
-+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
-+ (0xf<<2) | (3<<7), 1,
-+ "SYNCHRONIZE CACHE")) == 0)
-+ reply = do_synchronize_cache(fsg);
-+ break;
-+
-+ case TEST_UNIT_READY:
-+ fsg->data_size_from_cmnd = 0;
-+ reply = check_command(fsg, 6, DATA_DIR_NONE,
-+ 0, 1,
-+ "TEST UNIT READY");
-+ break;
-+
-+ /* Although optional, this command is used by MS-Windows. We
-+ * support a minimal version: BytChk must be 0. */
-+ case VERIFY:
-+ fsg->data_size_from_cmnd = 0;
-+ if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
-+ (1<<1) | (0xf<<2) | (3<<7), 1,
-+ "VERIFY")) == 0)
-+ reply = do_verify(fsg);
-+ break;
-+
-+ case WRITE_6:
-+ i = fsg->cmnd[4];
-+ fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
-+ if ((reply = check_command_size_in_blocks(fsg, 6,
-+ DATA_DIR_FROM_HOST,
-+ (7<<1) | (1<<4), 1,
-+ "WRITE(6)")) == 0)
-+ reply = do_write(fsg);
-+ break;
-+
-+ case WRITE_10:
-+ fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
-+ if ((reply = check_command_size_in_blocks(fsg, 10,
-+ DATA_DIR_FROM_HOST,
-+ (1<<1) | (0xf<<2) | (3<<7), 1,
-+ "WRITE(10)")) == 0)
-+ reply = do_write(fsg);
-+ break;
-+
-+ case WRITE_12:
-+ fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
-+ if ((reply = check_command_size_in_blocks(fsg, 12,
-+ DATA_DIR_FROM_HOST,
-+ (1<<1) | (0xf<<2) | (0xf<<6), 1,
-+ "WRITE(12)")) == 0)
-+ reply = do_write(fsg);
-+ break;
-+
-+ /* Some mandatory commands that we recognize but don't implement.
-+ * They don't mean much in this setting. It's left as an exercise
-+ * for anyone interested to implement RESERVE and RELEASE in terms
-+ * of Posix locks. */
-+ case FORMAT_UNIT:
-+ case RELEASE:
-+ case RESERVE:
-+ case SEND_DIAGNOSTIC:
-+ // Fall through
-+
-+ default:
-+ unknown_cmnd:
-+ fsg->data_size_from_cmnd = 0;
-+ sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
-+ if ((reply = check_command(fsg, fsg->cmnd_size,
-+ DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
-+ fsg->curlun->sense_data = SS_INVALID_COMMAND;
-+ reply = -EINVAL;
-+ }
-+ break;
-+ }
-+ up_read(&fsg->filesem);
-+
-+ if (reply == -EINTR || signal_pending(current))
-+ return -EINTR;
-+
-+ /* Set up the single reply buffer for finish_reply() */
-+ if (reply == -EINVAL)
-+ reply = 0; // Error reply length
-+ if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
-+ reply = min((u32) reply, fsg->data_size_from_cmnd);
-+ bh->inreq->length = reply;
-+ bh->state = BUF_STATE_FULL;
-+ fsg->residue -= reply;
-+ } // Otherwise it's already set
-+
-+ return 0;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
-+{
-+ struct usb_request *req = bh->outreq;
-+ struct bulk_cb_wrap *cbw = req->buf;
-+
-+ /* Was this a real packet? Should it be ignored? */
-+ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
-+ return -EINVAL;
-+
-+ /* Is the CBW valid? */
-+ if (req->actual != US_BULK_CB_WRAP_LEN ||
-+ cbw->Signature != cpu_to_le32(
-+ US_BULK_CB_SIGN)) {
-+ DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
-+ req->actual,
-+ le32_to_cpu(cbw->Signature));
-+
-+ /* The Bulk-only spec says we MUST stall the IN endpoint
-+ * (6.6.1), so it's unavoidable. It also says we must
-+ * retain this state until the next reset, but there's
-+ * no way to tell the controller driver it should ignore
-+ * Clear-Feature(HALT) requests.
-+ *
-+ * We aren't required to halt the OUT endpoint; instead
-+ * we can simply accept and discard any data received
-+ * until the next reset. */
-+ wedge_bulk_in_endpoint(fsg);
-+ set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-+ return -EINVAL;
-+ }
-+
-+ /* Is the CBW meaningful? */
-+ if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
-+ cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
-+ DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
-+ "cmdlen %u\n",
-+ cbw->Lun, cbw->Flags, cbw->Length);
-+
-+ /* We can do anything we want here, so let's stall the
-+ * bulk pipes if we are allowed to. */
-+ if (mod_data.can_stall) {
-+ fsg_set_halt(fsg, fsg->bulk_out);
-+ halt_bulk_in_endpoint(fsg);
-+ }
-+ return -EINVAL;
-+ }
-+
-+ /* Save the command for later */
-+ fsg->cmnd_size = cbw->Length;
-+ memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
-+ if (cbw->Flags & US_BULK_FLAG_IN)
-+ fsg->data_dir = DATA_DIR_TO_HOST;
-+ else
-+ fsg->data_dir = DATA_DIR_FROM_HOST;
-+ fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
-+ if (fsg->data_size == 0)
-+ fsg->data_dir = DATA_DIR_NONE;
-+ fsg->lun = cbw->Lun;
-+ fsg->tag = cbw->Tag;
-+ return 0;
-+}
-+
-+
-+static int get_next_command(struct fsg_dev *fsg)
-+{
-+ struct fsg_buffhd *bh;
-+ int rc = 0;
-+
-+ if (transport_is_bbb()) {
-+
-+ /* Wait for the next buffer to become available */
-+ bh = fsg->next_buffhd_to_fill;
-+ while (bh->state != BUF_STATE_EMPTY) {
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ /* Queue a request to read a Bulk-only CBW */
-+ set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
-+ start_transfer(fsg, fsg->bulk_out, bh->outreq,
-+ &bh->outreq_busy, &bh->state);
-+
-+ /* We will drain the buffer in software, which means we
-+ * can reuse it for the next filling. No need to advance
-+ * next_buffhd_to_fill. */
-+
-+ /* Wait for the CBW to arrive */
-+ while (bh->state != BUF_STATE_FULL) {
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+ smp_rmb();
-+ rc = received_cbw(fsg, bh);
-+ bh->state = BUF_STATE_EMPTY;
-+
-+ } else { // USB_PR_CB or USB_PR_CBI
-+
-+ /* Wait for the next command to arrive */
-+ while (fsg->cbbuf_cmnd_size == 0) {
-+ rc = sleep_thread(fsg);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ /* Is the previous status interrupt request still busy?
-+ * The host is allowed to skip reading the status,
-+ * so we must cancel it. */
-+ if (fsg->intreq_busy)
-+ usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-+
-+ /* Copy the command and mark the buffer empty */
-+ fsg->data_dir = DATA_DIR_UNKNOWN;
-+ spin_lock_irq(&fsg->lock);
-+ fsg->cmnd_size = fsg->cbbuf_cmnd_size;
-+ memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
-+ fsg->cbbuf_cmnd_size = 0;
-+ spin_unlock_irq(&fsg->lock);
-+
-+ /* Use LUN from the command */
-+ fsg->lun = fsg->cmnd[1] >> 5;
-+ }
-+
-+ /* Update current lun */
-+ if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
-+ fsg->curlun = &fsg->luns[fsg->lun];
-+ else
-+ fsg->curlun = NULL;
-+
-+ return rc;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
-+ const struct usb_endpoint_descriptor *d)
-+{
-+ int rc;
-+
-+ ep->driver_data = fsg;
-+ ep->desc = d;
-+ rc = usb_ep_enable(ep);
-+ if (rc)
-+ ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
-+ return rc;
-+}
-+
-+static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
-+ struct usb_request **preq)
-+{
-+ *preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
-+ if (*preq)
-+ return 0;
-+ ERROR(fsg, "can't allocate request for %s\n", ep->name);
-+ return -ENOMEM;
-+}
-+
-+/*
-+ * Reset interface setting and re-init endpoint state (toggle etc).
-+ * Call with altsetting < 0 to disable the interface. The only other
-+ * available altsetting is 0, which enables the interface.
-+ */
-+static int do_set_interface(struct fsg_dev *fsg, int altsetting)
-+{
-+ int rc = 0;
-+ int i;
-+ const struct usb_endpoint_descriptor *d;
-+
-+ if (fsg->running)
-+ DBG(fsg, "reset interface\n");
-+
-+reset:
-+ /* Deallocate the requests */
-+ for (i = 0; i < fsg_num_buffers; ++i) {
-+ struct fsg_buffhd *bh = &fsg->buffhds[i];
-+
-+ if (bh->inreq) {
-+ usb_ep_free_request(fsg->bulk_in, bh->inreq);
-+ bh->inreq = NULL;
-+ }
-+ if (bh->outreq) {
-+ usb_ep_free_request(fsg->bulk_out, bh->outreq);
-+ bh->outreq = NULL;
-+ }
-+ }
-+ if (fsg->intreq) {
-+ usb_ep_free_request(fsg->intr_in, fsg->intreq);
-+ fsg->intreq = NULL;
-+ }
-+
-+ /* Disable the endpoints */
-+ if (fsg->bulk_in_enabled) {
-+ usb_ep_disable(fsg->bulk_in);
-+ fsg->bulk_in_enabled = 0;
-+ }
-+ if (fsg->bulk_out_enabled) {
-+ usb_ep_disable(fsg->bulk_out);
-+ fsg->bulk_out_enabled = 0;
-+ }
-+ if (fsg->intr_in_enabled) {
-+ usb_ep_disable(fsg->intr_in);
-+ fsg->intr_in_enabled = 0;
-+ }
-+
-+ fsg->running = 0;
-+ if (altsetting < 0 || rc != 0)
-+ return rc;
-+
-+ DBG(fsg, "set interface %d\n", altsetting);
-+
-+ /* Enable the endpoints */
-+ d = fsg_ep_desc(fsg->gadget,
-+ &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
-+ &fsg_ss_bulk_in_desc);
-+ if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
-+ goto reset;
-+ fsg->bulk_in_enabled = 1;
-+
-+ d = fsg_ep_desc(fsg->gadget,
-+ &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
-+ &fsg_ss_bulk_out_desc);
-+ if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
-+ goto reset;
-+ fsg->bulk_out_enabled = 1;
-+ fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
-+ clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
-+
-+ if (transport_is_cbi()) {
-+ d = fsg_ep_desc(fsg->gadget,
-+ &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
-+ &fsg_ss_intr_in_desc);
-+ if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
-+ goto reset;
-+ fsg->intr_in_enabled = 1;
-+ }
-+
-+ /* Allocate the requests */
-+ for (i = 0; i < fsg_num_buffers; ++i) {
-+ struct fsg_buffhd *bh = &fsg->buffhds[i];
-+
-+ if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
-+ goto reset;
-+ if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
-+ goto reset;
-+ bh->inreq->buf = bh->outreq->buf = bh->buf;
-+ bh->inreq->context = bh->outreq->context = bh;
-+ bh->inreq->complete = bulk_in_complete;
-+ bh->outreq->complete = bulk_out_complete;
-+ }
-+ if (transport_is_cbi()) {
-+ if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
-+ goto reset;
-+ fsg->intreq->complete = intr_in_complete;
-+ }
-+
-+ fsg->running = 1;
-+ for (i = 0; i < fsg->nluns; ++i)
-+ fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-+ return rc;
-+}
-+
-+
-+/*
-+ * Change our operational configuration. This code must agree with the code
-+ * that returns config descriptors, and with interface altsetting code.
-+ *
-+ * It's also responsible for power management interactions. Some
-+ * configurations might not work with our current power sources.
-+ * For now we just assume the gadget is always self-powered.
-+ */
-+static int do_set_config(struct fsg_dev *fsg, u8 new_config)
-+{
-+ int rc = 0;
-+
-+ /* Disable the single interface */
-+ if (fsg->config != 0) {
-+ DBG(fsg, "reset config\n");
-+ fsg->config = 0;
-+ rc = do_set_interface(fsg, -1);
-+ }
-+
-+ /* Enable the interface */
-+ if (new_config != 0) {
-+ fsg->config = new_config;
-+ if ((rc = do_set_interface(fsg, 0)) != 0)
-+ fsg->config = 0; // Reset on errors
-+ else
-+ INFO(fsg, "%s config #%d\n",
-+ usb_speed_string(fsg->gadget->speed),
-+ fsg->config);
-+ }
-+ return rc;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void handle_exception(struct fsg_dev *fsg)
-+{
-+ siginfo_t info;
-+ int sig;
-+ int i;
-+ int num_active;
-+ struct fsg_buffhd *bh;
-+ enum fsg_state old_state;
-+ u8 new_config;
-+ struct fsg_lun *curlun;
-+ unsigned int exception_req_tag;
-+ int rc;
-+
-+ /* Clear the existing signals. Anything but SIGUSR1 is converted
-+ * into a high-priority EXIT exception. */
-+ for (;;) {
-+ sig = dequeue_signal_lock(current, &current->blocked, &info);
-+ if (!sig)
-+ break;
-+ if (sig != SIGUSR1) {
-+ if (fsg->state < FSG_STATE_EXIT)
-+ DBG(fsg, "Main thread exiting on signal\n");
-+ raise_exception(fsg, FSG_STATE_EXIT);
-+ }
-+ }
-+
-+ /* Cancel all the pending transfers */
-+ if (fsg->intreq_busy)
-+ usb_ep_dequeue(fsg->intr_in, fsg->intreq);
-+ for (i = 0; i < fsg_num_buffers; ++i) {
-+ bh = &fsg->buffhds[i];
-+ if (bh->inreq_busy)
-+ usb_ep_dequeue(fsg->bulk_in, bh->inreq);
-+ if (bh->outreq_busy)
-+ usb_ep_dequeue(fsg->bulk_out, bh->outreq);
-+ }
-+
-+ /* Wait until everything is idle */
-+ for (;;) {
-+ num_active = fsg->intreq_busy;
-+ for (i = 0; i < fsg_num_buffers; ++i) {
-+ bh = &fsg->buffhds[i];
-+ num_active += bh->inreq_busy + bh->outreq_busy;
-+ }
-+ if (num_active == 0)
-+ break;
-+ if (sleep_thread(fsg))
-+ return;
-+ }
-+
-+ /* Clear out the controller's fifos */
-+ if (fsg->bulk_in_enabled)
-+ usb_ep_fifo_flush(fsg->bulk_in);
-+ if (fsg->bulk_out_enabled)
-+ usb_ep_fifo_flush(fsg->bulk_out);
-+ if (fsg->intr_in_enabled)
-+ usb_ep_fifo_flush(fsg->intr_in);
-+
-+ /* Reset the I/O buffer states and pointers, the SCSI
-+ * state, and the exception. Then invoke the handler. */
-+ spin_lock_irq(&fsg->lock);
-+
-+ for (i = 0; i < fsg_num_buffers; ++i) {
-+ bh = &fsg->buffhds[i];
-+ bh->state = BUF_STATE_EMPTY;
-+ }
-+ fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
-+ &fsg->buffhds[0];
-+
-+ exception_req_tag = fsg->exception_req_tag;
-+ new_config = fsg->new_config;
-+ old_state = fsg->state;
-+
-+ if (old_state == FSG_STATE_ABORT_BULK_OUT)
-+ fsg->state = FSG_STATE_STATUS_PHASE;
-+ else {
-+ for (i = 0; i < fsg->nluns; ++i) {
-+ curlun = &fsg->luns[i];
-+ curlun->prevent_medium_removal = 0;
-+ curlun->sense_data = curlun->unit_attention_data =
-+ SS_NO_SENSE;
-+ curlun->sense_data_info = 0;
-+ curlun->info_valid = 0;
-+ }
-+ fsg->state = FSG_STATE_IDLE;
-+ }
-+ spin_unlock_irq(&fsg->lock);
-+
-+ /* Carry out any extra actions required for the exception */
-+ switch (old_state) {
-+ default:
-+ break;
-+
-+ case FSG_STATE_ABORT_BULK_OUT:
-+ send_status(fsg);
-+ spin_lock_irq(&fsg->lock);
-+ if (fsg->state == FSG_STATE_STATUS_PHASE)
-+ fsg->state = FSG_STATE_IDLE;
-+ spin_unlock_irq(&fsg->lock);
-+ break;
-+
-+ case FSG_STATE_RESET:
-+ /* In case we were forced against our will to halt a
-+ * bulk endpoint, clear the halt now. (The SuperH UDC
-+ * requires this.) */
-+ if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
-+ usb_ep_clear_halt(fsg->bulk_in);
-+
-+ if (transport_is_bbb()) {
-+ if (fsg->ep0_req_tag == exception_req_tag)
-+ ep0_queue(fsg); // Complete the status stage
-+
-+ } else if (transport_is_cbi())
-+ send_status(fsg); // Status by interrupt pipe
-+
-+ /* Technically this should go here, but it would only be
-+ * a waste of time. Ditto for the INTERFACE_CHANGE and
-+ * CONFIG_CHANGE cases. */
-+ // for (i = 0; i < fsg->nluns; ++i)
-+ // fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
-+ break;
-+
-+ case FSG_STATE_INTERFACE_CHANGE:
-+ rc = do_set_interface(fsg, 0);
-+ if (fsg->ep0_req_tag != exception_req_tag)
-+ break;
-+ if (rc != 0) // STALL on errors
-+ fsg_set_halt(fsg, fsg->ep0);
-+ else // Complete the status stage
-+ ep0_queue(fsg);
-+ break;
-+
-+ case FSG_STATE_CONFIG_CHANGE:
-+ rc = do_set_config(fsg, new_config);
-+ if (fsg->ep0_req_tag != exception_req_tag)
-+ break;
-+ if (rc != 0) // STALL on errors
-+ fsg_set_halt(fsg, fsg->ep0);
-+ else // Complete the status stage
-+ ep0_queue(fsg);
-+ break;
-+
-+ case FSG_STATE_DISCONNECT:
-+ for (i = 0; i < fsg->nluns; ++i)
-+ fsg_lun_fsync_sub(fsg->luns + i);
-+ do_set_config(fsg, 0); // Unconfigured state
-+ break;
-+
-+ case FSG_STATE_EXIT:
-+ case FSG_STATE_TERMINATED:
-+ do_set_config(fsg, 0); // Free resources
-+ spin_lock_irq(&fsg->lock);
-+ fsg->state = FSG_STATE_TERMINATED; // Stop the thread
-+ spin_unlock_irq(&fsg->lock);
-+ break;
-+ }
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int fsg_main_thread(void *fsg_)
-+{
-+ struct fsg_dev *fsg = fsg_;
-+
-+ /* Allow the thread to be killed by a signal, but set the signal mask
-+ * to block everything but INT, TERM, KILL, and USR1. */
-+ allow_signal(SIGINT);
-+ allow_signal(SIGTERM);
-+ allow_signal(SIGKILL);
-+ allow_signal(SIGUSR1);
-+
-+ /* Allow the thread to be frozen */
-+ set_freezable();
-+
-+ /* Arrange for userspace references to be interpreted as kernel
-+ * pointers. That way we can pass a kernel pointer to a routine
-+ * that expects a __user pointer and it will work okay. */
-+ set_fs(get_ds());
-+
-+ /* The main loop */
-+ while (fsg->state != FSG_STATE_TERMINATED) {
-+ if (exception_in_progress(fsg) || signal_pending(current)) {
-+ handle_exception(fsg);
-+ continue;
-+ }
-+
-+ if (!fsg->running) {
-+ sleep_thread(fsg);
-+ continue;
-+ }
-+
-+ if (get_next_command(fsg))
-+ continue;
-+
-+ spin_lock_irq(&fsg->lock);
-+ if (!exception_in_progress(fsg))
-+ fsg->state = FSG_STATE_DATA_PHASE;
-+ spin_unlock_irq(&fsg->lock);
-+
-+ if (do_scsi_command(fsg) || finish_reply(fsg))
-+ continue;
-+
-+ spin_lock_irq(&fsg->lock);
-+ if (!exception_in_progress(fsg))
-+ fsg->state = FSG_STATE_STATUS_PHASE;
-+ spin_unlock_irq(&fsg->lock);
-+
-+ if (send_status(fsg))
-+ continue;
-+
-+ spin_lock_irq(&fsg->lock);
-+ if (!exception_in_progress(fsg))
-+ fsg->state = FSG_STATE_IDLE;
-+ spin_unlock_irq(&fsg->lock);
-+ }
-+
-+ spin_lock_irq(&fsg->lock);
-+ fsg->thread_task = NULL;
-+ spin_unlock_irq(&fsg->lock);
-+
-+ /* If we are exiting because of a signal, unregister the
-+ * gadget driver. */
-+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
-+ usb_gadget_unregister_driver(&fsg_driver);
-+
-+ /* Let the unbind and cleanup routines know the thread has exited */
-+ complete_and_exit(&fsg->thread_notifier, 0);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+
-+/* The write permissions and store_xxx pointers are set in fsg_bind() */
-+static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
-+static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
-+static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void fsg_release(struct kref *ref)
-+{
-+ struct fsg_dev *fsg = container_of(ref, struct fsg_dev, ref);
-+
-+ kfree(fsg->luns);
-+ kfree(fsg);
-+}
-+
-+static void lun_release(struct device *dev)
-+{
-+ struct rw_semaphore *filesem = dev_get_drvdata(dev);
-+ struct fsg_dev *fsg =
-+ container_of(filesem, struct fsg_dev, filesem);
-+
-+ kref_put(&fsg->ref, fsg_release);
-+}
-+
-+static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
-+{
-+ struct fsg_dev *fsg = get_gadget_data(gadget);
-+ int i;
-+ struct fsg_lun *curlun;
-+ struct usb_request *req = fsg->ep0req;
-+
-+ DBG(fsg, "unbind\n");
-+ clear_bit(REGISTERED, &fsg->atomic_bitflags);
-+
-+ /* If the thread isn't already dead, tell it to exit now */
-+ if (fsg->state != FSG_STATE_TERMINATED) {
-+ raise_exception(fsg, FSG_STATE_EXIT);
-+ wait_for_completion(&fsg->thread_notifier);
-+
-+ /* The cleanup routine waits for this completion also */
-+ complete(&fsg->thread_notifier);
-+ }
-+
-+ /* Unregister the sysfs attribute files and the LUNs */
-+ for (i = 0; i < fsg->nluns; ++i) {
-+ curlun = &fsg->luns[i];
-+ if (curlun->registered) {
-+ device_remove_file(&curlun->dev, &dev_attr_nofua);
-+ device_remove_file(&curlun->dev, &dev_attr_ro);
-+ device_remove_file(&curlun->dev, &dev_attr_file);
-+ fsg_lun_close(curlun);
-+ device_unregister(&curlun->dev);
-+ curlun->registered = 0;
-+ }
-+ }
-+
-+ /* Free the data buffers */
-+ for (i = 0; i < fsg_num_buffers; ++i)
-+ kfree(fsg->buffhds[i].buf);
-+
-+ /* Free the request and buffer for endpoint 0 */
-+ if (req) {
-+ kfree(req->buf);
-+ usb_ep_free_request(fsg->ep0, req);
-+ }
-+
-+ set_gadget_data(gadget, NULL);
-+}
-+
-+
-+static int __init check_parameters(struct fsg_dev *fsg)
-+{
-+ int prot;
-+ int gcnum;
-+
-+ /* Store the default values */
-+ mod_data.transport_type = USB_PR_BULK;
-+ mod_data.transport_name = "Bulk-only";
-+ mod_data.protocol_type = USB_SC_SCSI;
-+ mod_data.protocol_name = "Transparent SCSI";
-+
-+ /* Some peripheral controllers are known not to be able to
-+ * halt bulk endpoints correctly. If one of them is present,
-+ * disable stalls.
-+ */
-+ if (gadget_is_at91(fsg->gadget))
-+ mod_data.can_stall = 0;
-+
-+ if (mod_data.release == 0xffff) { // Parameter wasn't set
-+ gcnum = usb_gadget_controller_number(fsg->gadget);
-+ if (gcnum >= 0)
-+ mod_data.release = 0x0300 + gcnum;
-+ else {
-+ WARNING(fsg, "controller '%s' not recognized\n",
-+ fsg->gadget->name);
-+ mod_data.release = 0x0399;
-+ }
-+ }
-+
-+ prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
-+
-+#ifdef CONFIG_USB_FILE_STORAGE_TEST
-+ if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
-+ ; // Use default setting
-+ } else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
-+ mod_data.transport_type = USB_PR_CB;
-+ mod_data.transport_name = "Control-Bulk";
-+ } else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
-+ mod_data.transport_type = USB_PR_CBI;
-+ mod_data.transport_name = "Control-Bulk-Interrupt";
-+ } else {
-+ ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
-+ return -EINVAL;
-+ }
-+
-+ if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
-+ prot == USB_SC_SCSI) {
-+ ; // Use default setting
-+ } else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
-+ prot == USB_SC_RBC) {
-+ mod_data.protocol_type = USB_SC_RBC;
-+ mod_data.protocol_name = "RBC";
-+ } else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
-+ strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
-+ prot == USB_SC_8020) {
-+ mod_data.protocol_type = USB_SC_8020;
-+ mod_data.protocol_name = "8020i (ATAPI)";
-+ } else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
-+ prot == USB_SC_QIC) {
-+ mod_data.protocol_type = USB_SC_QIC;
-+ mod_data.protocol_name = "QIC-157";
-+ } else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
-+ prot == USB_SC_UFI) {
-+ mod_data.protocol_type = USB_SC_UFI;
-+ mod_data.protocol_name = "UFI";
-+ } else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
-+ prot == USB_SC_8070) {
-+ mod_data.protocol_type = USB_SC_8070;
-+ mod_data.protocol_name = "8070i";
-+ } else {
-+ ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
-+ return -EINVAL;
-+ }
-+
-+ mod_data.buflen &= PAGE_CACHE_MASK;
-+ if (mod_data.buflen <= 0) {
-+ ERROR(fsg, "invalid buflen\n");
-+ return -ETOOSMALL;
-+ }
-+
-+#endif /* CONFIG_USB_FILE_STORAGE_TEST */
-+
-+ /* Serial string handling.
-+ * On a real device, the serial string would be loaded
-+ * from permanent storage. */
-+ if (mod_data.serial) {
-+ const char *ch;
-+ unsigned len = 0;
-+
-+ /* Sanity check :
-+ * The CB[I] specification limits the serial string to
-+ * 12 uppercase hexadecimal characters.
-+ * BBB need at least 12 uppercase hexadecimal characters,
-+ * with a maximum of 126. */
-+ for (ch = mod_data.serial; *ch; ++ch) {
-+ ++len;
-+ if ((*ch < '0' || *ch > '9') &&
-+ (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
-+ WARNING(fsg,
-+ "Invalid serial string character: %c\n",
-+ *ch);
-+ goto no_serial;
-+ }
-+ }
-+ if (len > 126 ||
-+ (mod_data.transport_type == USB_PR_BULK && len < 12) ||
-+ (mod_data.transport_type != USB_PR_BULK && len > 12)) {
-+ WARNING(fsg, "Invalid serial string length!\n");
-+ goto no_serial;
-+ }
-+ fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
-+ } else {
-+ WARNING(fsg, "No serial-number string provided!\n");
-+ no_serial:
-+ device_desc.iSerialNumber = 0;
-+ }
-+
-+ return 0;
-+}
-+
-+
-+static int __init fsg_bind(struct usb_gadget *gadget)
-+{
-+ struct fsg_dev *fsg = the_fsg;
-+ int rc;
-+ int i;
-+ struct fsg_lun *curlun;
-+ struct usb_ep *ep;
-+ struct usb_request *req;
-+ char *pathbuf, *p;
-+
-+ fsg->gadget = gadget;
-+ set_gadget_data(gadget, fsg);
-+ fsg->ep0 = gadget->ep0;
-+ fsg->ep0->driver_data = fsg;
-+
-+ if ((rc = check_parameters(fsg)) != 0)
-+ goto out;
-+
-+ if (mod_data.removable) { // Enable the store_xxx attributes
-+ dev_attr_file.attr.mode = 0644;
-+ dev_attr_file.store = fsg_store_file;
-+ if (!mod_data.cdrom) {
-+ dev_attr_ro.attr.mode = 0644;
-+ dev_attr_ro.store = fsg_store_ro;
-+ }
-+ }
-+
-+ /* Only for removable media? */
-+ dev_attr_nofua.attr.mode = 0644;
-+ dev_attr_nofua.store = fsg_store_nofua;
-+
-+ /* Find out how many LUNs there should be */
-+ i = mod_data.nluns;
-+ if (i == 0)
-+ i = max(mod_data.num_filenames, 1u);
-+ if (i > FSG_MAX_LUNS) {
-+ ERROR(fsg, "invalid number of LUNs: %d\n", i);
-+ rc = -EINVAL;
-+ goto out;
-+ }
-+
-+ /* Create the LUNs, open their backing files, and register the
-+ * LUN devices in sysfs. */
-+ fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
-+ if (!fsg->luns) {
-+ rc = -ENOMEM;
-+ goto out;
-+ }
-+ fsg->nluns = i;
-+
-+ for (i = 0; i < fsg->nluns; ++i) {
-+ curlun = &fsg->luns[i];
-+ curlun->cdrom = !!mod_data.cdrom;
-+ curlun->ro = mod_data.cdrom || mod_data.ro[i];
-+ curlun->initially_ro = curlun->ro;
-+ curlun->removable = mod_data.removable;
-+ curlun->nofua = mod_data.nofua[i];
-+ curlun->dev.release = lun_release;
-+ curlun->dev.parent = &gadget->dev;
-+ curlun->dev.driver = &fsg_driver.driver;
-+ dev_set_drvdata(&curlun->dev, &fsg->filesem);
-+ dev_set_name(&curlun->dev,"%s-lun%d",
-+ dev_name(&gadget->dev), i);
-+
-+ kref_get(&fsg->ref);
-+ rc = device_register(&curlun->dev);
-+ if (rc) {
-+ INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
-+ put_device(&curlun->dev);
-+ goto out;
-+ }
-+ curlun->registered = 1;
-+
-+ rc = device_create_file(&curlun->dev, &dev_attr_ro);
-+ if (rc)
-+ goto out;
-+ rc = device_create_file(&curlun->dev, &dev_attr_nofua);
-+ if (rc)
-+ goto out;
-+ rc = device_create_file(&curlun->dev, &dev_attr_file);
-+ if (rc)
-+ goto out;
-+
-+ if (mod_data.file[i] && *mod_data.file[i]) {
-+ rc = fsg_lun_open(curlun, mod_data.file[i]);
-+ if (rc)
-+ goto out;
-+ } else if (!mod_data.removable) {
-+ ERROR(fsg, "no file given for LUN%d\n", i);
-+ rc = -EINVAL;
-+ goto out;
-+ }
-+ }
-+
-+ /* Find all the endpoints we will use */
-+ usb_ep_autoconfig_reset(gadget);
-+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
-+ if (!ep)
-+ goto autoconf_fail;
-+ ep->driver_data = fsg; // claim the endpoint
-+ fsg->bulk_in = ep;
-+
-+ ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
-+ if (!ep)
-+ goto autoconf_fail;
-+ ep->driver_data = fsg; // claim the endpoint
-+ fsg->bulk_out = ep;
-+
-+ if (transport_is_cbi()) {
-+ ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
-+ if (!ep)
-+ goto autoconf_fail;
-+ ep->driver_data = fsg; // claim the endpoint
-+ fsg->intr_in = ep;
-+ }
-+
-+ /* Fix up the descriptors */
-+ device_desc.idVendor = cpu_to_le16(mod_data.vendor);
-+ device_desc.idProduct = cpu_to_le16(mod_data.product);
-+ device_desc.bcdDevice = cpu_to_le16(mod_data.release);
-+
-+ i = (transport_is_cbi() ? 3 : 2); // Number of endpoints
-+ fsg_intf_desc.bNumEndpoints = i;
-+ fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
-+ fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
-+ fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-+
-+ if (gadget_is_dualspeed(gadget)) {
-+ fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-+
-+ /* Assume endpoint addresses are the same for both speeds */
-+ fsg_hs_bulk_in_desc.bEndpointAddress =
-+ fsg_fs_bulk_in_desc.bEndpointAddress;
-+ fsg_hs_bulk_out_desc.bEndpointAddress =
-+ fsg_fs_bulk_out_desc.bEndpointAddress;
-+ fsg_hs_intr_in_desc.bEndpointAddress =
-+ fsg_fs_intr_in_desc.bEndpointAddress;
-+ }
-+
-+ if (gadget_is_superspeed(gadget)) {
-+ unsigned max_burst;
-+
-+ fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
-+
-+ /* Calculate bMaxBurst, we know packet size is 1024 */
-+ max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
-+
-+ /* Assume endpoint addresses are the same for both speeds */
-+ fsg_ss_bulk_in_desc.bEndpointAddress =
-+ fsg_fs_bulk_in_desc.bEndpointAddress;
-+ fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
-+
-+ fsg_ss_bulk_out_desc.bEndpointAddress =
-+ fsg_fs_bulk_out_desc.bEndpointAddress;
-+ fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
-+ }
-+
-+ if (gadget_is_otg(gadget))
-+ fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
-+
-+ rc = -ENOMEM;
-+
-+ /* Allocate the request and buffer for endpoint 0 */
-+ fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
-+ if (!req)
-+ goto out;
-+ req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
-+ if (!req->buf)
-+ goto out;
-+ req->complete = ep0_complete;
-+
-+ /* Allocate the data buffers */
-+ for (i = 0; i < fsg_num_buffers; ++i) {
-+ struct fsg_buffhd *bh = &fsg->buffhds[i];
-+
-+ /* Allocate for the bulk-in endpoint. We assume that
-+ * the buffer will also work with the bulk-out (and
-+ * interrupt-in) endpoint. */
-+ bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
-+ if (!bh->buf)
-+ goto out;
-+ bh->next = bh + 1;
-+ }
-+ fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
-+
-+ /* This should reflect the actual gadget power source */
-+ usb_gadget_set_selfpowered(gadget);
-+
-+ snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
-+ "%s %s with %s",
-+ init_utsname()->sysname, init_utsname()->release,
-+ gadget->name);
-+
-+ fsg->thread_task = kthread_create(fsg_main_thread, fsg,
-+ "file-storage-gadget");
-+ if (IS_ERR(fsg->thread_task)) {
-+ rc = PTR_ERR(fsg->thread_task);
-+ goto out;
-+ }
-+
-+ INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
-+ INFO(fsg, "NOTE: This driver is deprecated. "
-+ "Consider using g_mass_storage instead.\n");
-+ INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
-+
-+ pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
-+ for (i = 0; i < fsg->nluns; ++i) {
-+ curlun = &fsg->luns[i];
-+ if (fsg_lun_is_open(curlun)) {
-+ p = NULL;
-+ if (pathbuf) {
-+ p = d_path(&curlun->filp->f_path,
-+ pathbuf, PATH_MAX);
-+ if (IS_ERR(p))
-+ p = NULL;
-+ }
-+ LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
-+ curlun->ro, curlun->nofua, (p ? p : "(error)"));
-+ }
-+ }
-+ kfree(pathbuf);
-+
-+ DBG(fsg, "transport=%s (x%02x)\n",
-+ mod_data.transport_name, mod_data.transport_type);
-+ DBG(fsg, "protocol=%s (x%02x)\n",
-+ mod_data.protocol_name, mod_data.protocol_type);
-+ DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
-+ mod_data.vendor, mod_data.product, mod_data.release);
-+ DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
-+ mod_data.removable, mod_data.can_stall,
-+ mod_data.cdrom, mod_data.buflen);
-+ DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
-+
-+ set_bit(REGISTERED, &fsg->atomic_bitflags);
-+
-+ /* Tell the thread to start working */
-+ wake_up_process(fsg->thread_task);
-+ return 0;
-+
-+autoconf_fail:
-+ ERROR(fsg, "unable to autoconfigure all endpoints\n");
-+ rc = -ENOTSUPP;
-+
-+out:
-+ fsg->state = FSG_STATE_TERMINATED; // The thread is dead
-+ fsg_unbind(gadget);
-+ complete(&fsg->thread_notifier);
-+ return rc;
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void fsg_suspend(struct usb_gadget *gadget)
-+{
-+ struct fsg_dev *fsg = get_gadget_data(gadget);
-+
-+ DBG(fsg, "suspend\n");
-+ set_bit(SUSPENDED, &fsg->atomic_bitflags);
-+}
-+
-+static void fsg_resume(struct usb_gadget *gadget)
-+{
-+ struct fsg_dev *fsg = get_gadget_data(gadget);
-+
-+ DBG(fsg, "resume\n");
-+ clear_bit(SUSPENDED, &fsg->atomic_bitflags);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_gadget_driver fsg_driver = {
-+ .max_speed = USB_SPEED_SUPER,
-+ .function = (char *) fsg_string_product,
-+ .unbind = fsg_unbind,
-+ .disconnect = fsg_disconnect,
-+ .setup = fsg_setup,
-+ .suspend = fsg_suspend,
-+ .resume = fsg_resume,
-+
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .owner = THIS_MODULE,
-+ // .release = ...
-+ // .suspend = ...
-+ // .resume = ...
-+ },
-+};
-+
-+
-+static int __init fsg_alloc(void)
-+{
-+ struct fsg_dev *fsg;
-+
-+ fsg = kzalloc(sizeof *fsg +
-+ fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
-+
-+ if (!fsg)
-+ return -ENOMEM;
-+ spin_lock_init(&fsg->lock);
-+ init_rwsem(&fsg->filesem);
-+ kref_init(&fsg->ref);
-+ init_completion(&fsg->thread_notifier);
-+
-+ the_fsg = fsg;
-+ return 0;
-+}
-+
-+
-+static int __init fsg_init(void)
-+{
-+ int rc;
-+ struct fsg_dev *fsg;
-+
-+ rc = fsg_num_buffers_validate();
-+ if (rc != 0)
-+ return rc;
-+
-+ if ((rc = fsg_alloc()) != 0)
-+ return rc;
-+ fsg = the_fsg;
-+ if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
-+ kref_put(&fsg->ref, fsg_release);
-+ return rc;
-+}
-+module_init(fsg_init);
-+
-+
-+static void __exit fsg_cleanup(void)
-+{
-+ struct fsg_dev *fsg = the_fsg;
-+
-+ /* Unregister the driver iff the thread hasn't already done so */
-+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
-+ usb_gadget_unregister_driver(&fsg_driver);
-+
-+ /* Wait for the thread to finish up */
-+ wait_for_completion(&fsg->thread_notifier);
-+
-+ kref_put(&fsg->ref, fsg_release);
-+}
-+module_exit(fsg_cleanup);
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -754,6 +754,19 @@ config USB_HWA_HCD
- To compile this driver a module, choose M here: the module
- will be called "hwa-hc".
-
-+config USB_DWCOTG
-+ tristate "Synopsis DWC host support"
-+ depends on USB
-+ help
-+ The Synopsis DWC controller is a dual-role
-+ host/peripheral/OTG ("On The Go") USB controllers.
-+
-+ Enable this option to support this IP in host controller mode.
-+ If unsure, say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ modules built will be called dwc_otg and dwc_common_port.
-+
- config USB_IMX21_HCD
- tristate "i.MX21 HCD support"
- depends on ARM && ARCH_MXC
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -74,6 +74,8 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o
- obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o
- obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
- obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o
-+
-+obj-$(CONFIG_USB_DWCOTG) += dwc_otg/ dwc_common_port/
- obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o
- obj-$(CONFIG_USB_FSL_USB2) += fsl-mph-dr-of.o
- obj-$(CONFIG_USB_EHCI_FSL) += fsl-mph-dr-of.o
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/Makefile
-@@ -0,0 +1,58 @@
-+#
-+# Makefile for DWC_common library
-+#
-+
-+ifneq ($(KERNELRELEASE),)
-+
-+ccflags-y += -DDWC_LINUX
-+#ccflags-y += -DDEBUG
-+#ccflags-y += -DDWC_DEBUG_REGS
-+#ccflags-y += -DDWC_DEBUG_MEMORY
-+
-+ccflags-y += -DDWC_LIBMODULE
-+ccflags-y += -DDWC_CCLIB
-+#ccflags-y += -DDWC_CRYPTOLIB
-+ccflags-y += -DDWC_NOTIFYLIB
-+ccflags-y += -DDWC_UTFLIB
-+
-+obj-$(CONFIG_USB_DWCOTG) += dwc_common_port_lib.o
-+dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
-+ dwc_crypto.o dwc_notifier.o \
-+ dwc_common_linux.o dwc_mem.o
-+
-+kernrelwd := $(subst ., ,$(KERNELRELEASE))
-+kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
-+
-+ifneq ($(kernrel3),2.6.20)
-+# grayg - I only know that we use ccflags-y in 2.6.31 actually
-+ccflags-y += $(CPPFLAGS)
-+endif
-+
-+else
-+
-+#ifeq ($(KDIR),)
-+#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
-+#endif
-+
-+ifeq ($(ARCH),)
-+$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
-+ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
-+endif
-+
-+ifeq ($(DOXYGEN),)
-+DOXYGEN := doxygen
-+endif
-+
-+default:
-+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
-+
-+docs: $(wildcard *.[hc]) doc/doxygen.cfg
-+ $(DOXYGEN) doc/doxygen.cfg
-+
-+tags: $(wildcard *.[hc])
-+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
-+
-+endif
-+
-+clean:
-+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd
-@@ -0,0 +1,17 @@
-+CFLAGS += -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include
-+CFLAGS += -DDWC_FREEBSD
-+CFLAGS += -DDEBUG
-+#CFLAGS += -DDWC_DEBUG_REGS
-+#CFLAGS += -DDWC_DEBUG_MEMORY
-+
-+#CFLAGS += -DDWC_LIBMODULE
-+#CFLAGS += -DDWC_CCLIB
-+#CFLAGS += -DDWC_CRYPTOLIB
-+#CFLAGS += -DDWC_NOTIFYLIB
-+#CFLAGS += -DDWC_UTFLIB
-+
-+KMOD = dwc_common_port_lib
-+SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \
-+ dwc_common_fbsd.c dwc_mem.c
-+
-+.include <bsd.kmod.mk>
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/Makefile.linux
-@@ -0,0 +1,49 @@
-+#
-+# Makefile for DWC_common library
-+#
-+ifneq ($(KERNELRELEASE),)
-+
-+ccflags-y += -DDWC_LINUX
-+#ccflags-y += -DDEBUG
-+#ccflags-y += -DDWC_DEBUG_REGS
-+#ccflags-y += -DDWC_DEBUG_MEMORY
-+
-+ccflags-y += -DDWC_LIBMODULE
-+ccflags-y += -DDWC_CCLIB
-+ccflags-y += -DDWC_CRYPTOLIB
-+ccflags-y += -DDWC_NOTIFYLIB
-+ccflags-y += -DDWC_UTFLIB
-+
-+obj-m := dwc_common_port_lib.o
-+dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
-+ dwc_crypto.o dwc_notifier.o \
-+ dwc_common_linux.o dwc_mem.o
-+
-+else
-+
-+ifeq ($(KDIR),)
-+$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
-+endif
-+
-+ifeq ($(ARCH),)
-+$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
-+ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
-+endif
-+
-+ifeq ($(DOXYGEN),)
-+DOXYGEN := doxygen
-+endif
-+
-+default:
-+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
-+
-+docs: $(wildcard *.[hc]) doc/doxygen.cfg
-+ $(DOXYGEN) doc/doxygen.cfg
-+
-+tags: $(wildcard *.[hc])
-+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
-+
-+endif
-+
-+clean:
-+ rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/changes.txt
-@@ -0,0 +1,174 @@
-+
-+dwc_read_reg32() and friends now take an additional parameter, a pointer to an
-+IO context struct. The IO context struct should live in an os-dependent struct
-+in your driver. As an example, the dwc_usb3 driver has an os-dependent struct
-+named 'os_dep' embedded in the main device struct. So there these calls look
-+like this:
-+
-+ dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg);
-+
-+ dwc_write_reg32(&usb3_dev->os_dep.ioctx,
-+ &pcd->dev_global_regs->dcfg, 0);
-+
-+Note that for the existing Linux driver ports, it is not necessary to actually
-+define the 'ioctx' member in the os-dependent struct. Since Linux does not
-+require an IO context, its macros for dwc_read_reg32() and friends do not
-+use the context pointer, so it is optimized away by the compiler. But it is
-+necessary to add the pointer parameter to all of the call sites, to be ready
-+for any future ports (such as FreeBSD) which do require an IO context.
-+
-+
-+Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now
-+take an additional parameter, a pointer to a memory context. Examples:
-+
-+ addr = dwc_alloc(&usb3_dev->os_dep.memctx, size);
-+
-+ dwc_free(&usb3_dev->os_dep.memctx, addr);
-+
-+Again, for the Linux ports, it is not necessary to actually define the memctx
-+member, but it is necessary to add the pointer parameter to all of the call
-+sites.
-+
-+
-+Same for dwc_dma_alloc() and dwc_dma_free(). Examples:
-+
-+ virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr);
-+
-+ dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr);
-+
-+
-+Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples:
-+
-+ mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx);
-+
-+ dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex);
-+
-+
-+Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples:
-+
-+ lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx);
-+
-+ dwc_spinlock_free(&usb3_dev->osdep.splctx, lock);
-+
-+
-+Same for dwc_timer_alloc(). Example:
-+
-+ timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1",
-+ cb_func, cb_data);
-+
-+
-+Same for dwc_waitq_alloc(). Example:
-+
-+ waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx);
-+
-+
-+Same for dwc_thread_run(). Example:
-+
-+ thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func,
-+ "dwc_usb3_thd1", data);
-+
-+
-+Same for dwc_workq_alloc(). Example:
-+
-+ workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1");
-+
-+
-+Same for dwc_task_alloc(). Example:
-+
-+ task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1",
-+ cb_func, cb_data);
-+
-+
-+In addition to the context pointer additions, a few core functions have had
-+other changes made to their parameters:
-+
-+The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore()
-+has been changed from a uint64_t to a dwc_irqflags_t.
-+
-+dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the
-+FreeBSD equivalent of that function requires it.
-+
-+And, in addition to the context pointer, dwc_task_alloc() also adds a
-+'char *name' parameter, to be consistent with dwc_thread_run() and
-+dwc_workq_alloc(), and because the FreeBSD equivalent of that function
-+requires a unique name.
-+
-+
-+Here is a complete list of the core functions that now take a pointer to a
-+context as their first parameter:
-+
-+ dwc_read_reg32
-+ dwc_read_reg64
-+ dwc_write_reg32
-+ dwc_write_reg64
-+ dwc_modify_reg32
-+ dwc_modify_reg64
-+ dwc_alloc
-+ dwc_alloc_atomic
-+ dwc_strdup
-+ dwc_free
-+ dwc_dma_alloc
-+ dwc_dma_free
-+ dwc_mutex_alloc
-+ dwc_mutex_free
-+ dwc_spinlock_alloc
-+ dwc_spinlock_free
-+ dwc_timer_alloc
-+ dwc_waitq_alloc
-+ dwc_thread_run
-+ dwc_workq_alloc
-+ dwc_task_alloc Also adds a 'char *name' as its 2nd parameter
-+
-+And here are the core functions that have other changes to their parameters:
-+
-+ dwc_spinlock_irqsave 'flags' param is now a 'dwc_irqflags_t *'
-+ dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t'
-+ dwc_thread_should_stop Adds a 'dwc_thread_t *' parameter
-+
-+
-+
-+The changes to the core functions also require some of the other library
-+functions to change:
-+
-+ dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx'
-+ (for memory allocation) as the 1st param and a 'void *mtxctx'
-+ (for mutex allocation) as the 2nd param.
-+
-+ dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(),
-+ dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a
-+ 'void *memctx' as the 1st param.
-+
-+ dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a
-+ 'void *memctx' as the 1st param.
-+
-+ dwc_modpow() now takes a 'void *memctx' as the 1st param.
-+
-+ dwc_alloc_notification_manager() now takes a 'void *memctx' as the
-+ 1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd
-+ param, and also now returns an integer value that is non-zero if
-+ allocation of its data structures or work queue fails.
-+
-+ dwc_register_notifier() now takes a 'void *memctx' as the 1st param.
-+
-+ dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first
-+ param, and also now returns an integer value that is non-zero if
-+ allocation of its data structures fails.
-+
-+
-+
-+Other miscellaneous changes:
-+
-+The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to
-+DWC_DEBUG_MEMORY and DWC_DEBUG_REGS.
-+
-+The following #define's have been added to allow selectively compiling library
-+features:
-+
-+ DWC_CCLIB
-+ DWC_CRYPTOLIB
-+ DWC_NOTIFYLIB
-+ DWC_UTFLIB
-+
-+A DWC_LIBMODULE #define has also been added. If this is not defined, then the
-+module code in dwc_common_linux.c is not compiled in. This allows linking the
-+library code directly into a driver module, instead of as a standalone module.
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
-@@ -0,0 +1,270 @@
-+# Doxyfile 1.4.5
-+
-+#---------------------------------------------------------------------------
-+# Project related configuration options
-+#---------------------------------------------------------------------------
-+PROJECT_NAME = "Synopsys DWC Portability and Common Library for UWB"
-+PROJECT_NUMBER =
-+OUTPUT_DIRECTORY = doc
-+CREATE_SUBDIRS = NO
-+OUTPUT_LANGUAGE = English
-+BRIEF_MEMBER_DESC = YES
-+REPEAT_BRIEF = YES
-+ABBREVIATE_BRIEF = "The $name class" \
-+ "The $name widget" \
-+ "The $name file" \
-+ is \
-+ provides \
-+ specifies \
-+ contains \
-+ represents \
-+ a \
-+ an \
-+ the
-+ALWAYS_DETAILED_SEC = YES
-+INLINE_INHERITED_MEMB = NO
-+FULL_PATH_NAMES = NO
-+STRIP_FROM_PATH = ..
-+STRIP_FROM_INC_PATH =
-+SHORT_NAMES = NO
-+JAVADOC_AUTOBRIEF = YES
-+MULTILINE_CPP_IS_BRIEF = NO
-+DETAILS_AT_TOP = YES
-+INHERIT_DOCS = YES
-+SEPARATE_MEMBER_PAGES = NO
-+TAB_SIZE = 8
-+ALIASES =
-+OPTIMIZE_OUTPUT_FOR_C = YES
-+OPTIMIZE_OUTPUT_JAVA = NO
-+BUILTIN_STL_SUPPORT = NO
-+DISTRIBUTE_GROUP_DOC = NO
-+SUBGROUPING = NO
-+#---------------------------------------------------------------------------
-+# Build related configuration options
-+#---------------------------------------------------------------------------
-+EXTRACT_ALL = NO
-+EXTRACT_PRIVATE = NO
-+EXTRACT_STATIC = YES
-+EXTRACT_LOCAL_CLASSES = NO
-+EXTRACT_LOCAL_METHODS = NO
-+HIDE_UNDOC_MEMBERS = NO
-+HIDE_UNDOC_CLASSES = NO
-+HIDE_FRIEND_COMPOUNDS = NO
-+HIDE_IN_BODY_DOCS = NO
-+INTERNAL_DOCS = NO
-+CASE_SENSE_NAMES = YES
-+HIDE_SCOPE_NAMES = NO
-+SHOW_INCLUDE_FILES = NO
-+INLINE_INFO = YES
-+SORT_MEMBER_DOCS = NO
-+SORT_BRIEF_DOCS = NO
-+SORT_BY_SCOPE_NAME = NO
-+GENERATE_TODOLIST = YES
-+GENERATE_TESTLIST = YES
-+GENERATE_BUGLIST = YES
-+GENERATE_DEPRECATEDLIST= YES
-+ENABLED_SECTIONS =
-+MAX_INITIALIZER_LINES = 30
-+SHOW_USED_FILES = YES
-+SHOW_DIRECTORIES = YES
-+FILE_VERSION_FILTER =
-+#---------------------------------------------------------------------------
-+# configuration options related to warning and progress messages
-+#---------------------------------------------------------------------------
-+QUIET = YES
-+WARNINGS = YES
-+WARN_IF_UNDOCUMENTED = NO
-+WARN_IF_DOC_ERROR = YES
-+WARN_NO_PARAMDOC = YES
-+WARN_FORMAT = "$file:$line: $text"
-+WARN_LOGFILE =
-+#---------------------------------------------------------------------------
-+# configuration options related to the input files
-+#---------------------------------------------------------------------------
-+INPUT = .
-+FILE_PATTERNS = *.c \
-+ *.cc \
-+ *.cxx \
-+ *.cpp \
-+ *.c++ \
-+ *.d \
-+ *.java \
-+ *.ii \
-+ *.ixx \
-+ *.ipp \
-+ *.i++ \
-+ *.inl \
-+ *.h \
-+ *.hh \
-+ *.hxx \
-+ *.hpp \
-+ *.h++ \
-+ *.idl \
-+ *.odl \
-+ *.cs \
-+ *.php \
-+ *.php3 \
-+ *.inc \
-+ *.m \
-+ *.mm \
-+ *.dox \
-+ *.py \
-+ *.C \
-+ *.CC \
-+ *.C++ \
-+ *.II \
-+ *.I++ \
-+ *.H \
-+ *.HH \
-+ *.H++ \
-+ *.CS \
-+ *.PHP \
-+ *.PHP3 \
-+ *.M \
-+ *.MM \
-+ *.PY
-+RECURSIVE = NO
-+EXCLUDE =
-+EXCLUDE_SYMLINKS = NO
-+EXCLUDE_PATTERNS =
-+EXAMPLE_PATH =
-+EXAMPLE_PATTERNS = *
-+EXAMPLE_RECURSIVE = NO
-+IMAGE_PATH =
-+INPUT_FILTER =
-+FILTER_PATTERNS =
-+FILTER_SOURCE_FILES = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to source browsing
-+#---------------------------------------------------------------------------
-+SOURCE_BROWSER = NO
-+INLINE_SOURCES = NO
-+STRIP_CODE_COMMENTS = YES
-+REFERENCED_BY_RELATION = YES
-+REFERENCES_RELATION = YES
-+USE_HTAGS = NO
-+VERBATIM_HEADERS = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the alphabetical class index
-+#---------------------------------------------------------------------------
-+ALPHABETICAL_INDEX = NO
-+COLS_IN_ALPHA_INDEX = 5
-+IGNORE_PREFIX =
-+#---------------------------------------------------------------------------
-+# configuration options related to the HTML output
-+#---------------------------------------------------------------------------
-+GENERATE_HTML = YES
-+HTML_OUTPUT = html
-+HTML_FILE_EXTENSION = .html
-+HTML_HEADER =
-+HTML_FOOTER =
-+HTML_STYLESHEET =
-+HTML_ALIGN_MEMBERS = YES
-+GENERATE_HTMLHELP = NO
-+CHM_FILE =
-+HHC_LOCATION =
-+GENERATE_CHI = NO
-+BINARY_TOC = NO
-+TOC_EXPAND = NO
-+DISABLE_INDEX = NO
-+ENUM_VALUES_PER_LINE = 4
-+GENERATE_TREEVIEW = YES
-+TREEVIEW_WIDTH = 250
-+#---------------------------------------------------------------------------
-+# configuration options related to the LaTeX output
-+#---------------------------------------------------------------------------
-+GENERATE_LATEX = NO
-+LATEX_OUTPUT = latex
-+LATEX_CMD_NAME = latex
-+MAKEINDEX_CMD_NAME = makeindex
-+COMPACT_LATEX = NO
-+PAPER_TYPE = a4wide
-+EXTRA_PACKAGES =
-+LATEX_HEADER =
-+PDF_HYPERLINKS = NO
-+USE_PDFLATEX = NO
-+LATEX_BATCHMODE = NO
-+LATEX_HIDE_INDICES = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the RTF output
-+#---------------------------------------------------------------------------
-+GENERATE_RTF = NO
-+RTF_OUTPUT = rtf
-+COMPACT_RTF = NO
-+RTF_HYPERLINKS = NO
-+RTF_STYLESHEET_FILE =
-+RTF_EXTENSIONS_FILE =
-+#---------------------------------------------------------------------------
-+# configuration options related to the man page output
-+#---------------------------------------------------------------------------
-+GENERATE_MAN = NO
-+MAN_OUTPUT = man
-+MAN_EXTENSION = .3
-+MAN_LINKS = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the XML output
-+#---------------------------------------------------------------------------
-+GENERATE_XML = NO
-+XML_OUTPUT = xml
-+XML_SCHEMA =
-+XML_DTD =
-+XML_PROGRAMLISTING = YES
-+#---------------------------------------------------------------------------
-+# configuration options for the AutoGen Definitions output
-+#---------------------------------------------------------------------------
-+GENERATE_AUTOGEN_DEF = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the Perl module output
-+#---------------------------------------------------------------------------
-+GENERATE_PERLMOD = NO
-+PERLMOD_LATEX = NO
-+PERLMOD_PRETTY = YES
-+PERLMOD_MAKEVAR_PREFIX =
-+#---------------------------------------------------------------------------
-+# Configuration options related to the preprocessor
-+#---------------------------------------------------------------------------
-+ENABLE_PREPROCESSING = YES
-+MACRO_EXPANSION = NO
-+EXPAND_ONLY_PREDEF = NO
-+SEARCH_INCLUDES = YES
-+INCLUDE_PATH =
-+INCLUDE_FILE_PATTERNS =
-+PREDEFINED = DEBUG DEBUG_MEMORY
-+EXPAND_AS_DEFINED =
-+SKIP_FUNCTION_MACROS = YES
-+#---------------------------------------------------------------------------
-+# Configuration::additions related to external references
-+#---------------------------------------------------------------------------
-+TAGFILES =
-+GENERATE_TAGFILE =
-+ALLEXTERNALS = NO
-+EXTERNAL_GROUPS = YES
-+PERL_PATH = /usr/bin/perl
-+#---------------------------------------------------------------------------
-+# Configuration options related to the dot tool
-+#---------------------------------------------------------------------------
-+CLASS_DIAGRAMS = YES
-+HIDE_UNDOC_RELATIONS = YES
-+HAVE_DOT = NO
-+CLASS_GRAPH = YES
-+COLLABORATION_GRAPH = YES
-+GROUP_GRAPHS = YES
-+UML_LOOK = NO
-+TEMPLATE_RELATIONS = NO
-+INCLUDE_GRAPH = NO
-+INCLUDED_BY_GRAPH = YES
-+CALL_GRAPH = NO
-+GRAPHICAL_HIERARCHY = YES
-+DIRECTORY_GRAPH = YES
-+DOT_IMAGE_FORMAT = png
-+DOT_PATH =
-+DOTFILE_DIRS =
-+MAX_DOT_GRAPH_DEPTH = 1000
-+DOT_TRANSPARENT = NO
-+DOT_MULTI_TARGETS = NO
-+GENERATE_LEGEND = YES
-+DOT_CLEANUP = YES
-+#---------------------------------------------------------------------------
-+# Configuration::additions related to the search engine
-+#---------------------------------------------------------------------------
-+SEARCHENGINE = NO
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_cc.c
-@@ -0,0 +1,532 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $
-+ * $Revision: #4 $
-+ * $Date: 2010/11/04 $
-+ * $Change: 1621692 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+#ifdef DWC_CCLIB
-+
-+#include "dwc_cc.h"
-+
-+typedef struct dwc_cc
-+{
-+ uint32_t uid;
-+ uint8_t chid[16];
-+ uint8_t cdid[16];
-+ uint8_t ck[16];
-+ uint8_t *name;
-+ uint8_t length;
-+ DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry;
-+} dwc_cc_t;
-+
-+DWC_CIRCLEQ_HEAD(context_list, dwc_cc);
-+
-+/** The main structure for CC management. */
-+struct dwc_cc_if
-+{
-+ dwc_mutex_t *mutex;
-+ char *filename;
-+
-+ unsigned is_host:1;
-+
-+ dwc_notifier_t *notifier;
-+
-+ struct context_list list;
-+};
-+
-+#ifdef DEBUG
-+static inline void dump_bytes(char *name, uint8_t *bytes, int len)
-+{
-+ int i;
-+ DWC_PRINTF("%s: ", name);
-+ for (i=0; i<len; i++) {
-+ DWC_PRINTF("%02x ", bytes[i]);
-+ }
-+ DWC_PRINTF("\n");
-+}
-+#else
-+#define dump_bytes(x...)
-+#endif
-+
-+static dwc_cc_t *alloc_cc(void *mem_ctx, uint8_t *name, uint32_t length)
-+{
-+ dwc_cc_t *cc = dwc_alloc(mem_ctx, sizeof(dwc_cc_t));
-+ if (!cc) {
-+ return NULL;
-+ }
-+ DWC_MEMSET(cc, 0, sizeof(dwc_cc_t));
-+
-+ if (name) {
-+ cc->length = length;
-+ cc->name = dwc_alloc(mem_ctx, length);
-+ if (!cc->name) {
-+ dwc_free(mem_ctx, cc);
-+ return NULL;
-+ }
-+
-+ DWC_MEMCPY(cc->name, name, length);
-+ }
-+
-+ return cc;
-+}
-+
-+static void free_cc(void *mem_ctx, dwc_cc_t *cc)
-+{
-+ if (cc->name) {
-+ dwc_free(mem_ctx, cc->name);
-+ }
-+ dwc_free(mem_ctx, cc);
-+}
-+
-+static uint32_t next_uid(dwc_cc_if_t *cc_if)
-+{
-+ uint32_t uid = 0;
-+ dwc_cc_t *cc;
-+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
-+ if (cc->uid > uid) {
-+ uid = cc->uid;
-+ }
-+ }
-+
-+ if (uid == 0) {
-+ uid = 255;
-+ }
-+
-+ return uid + 1;
-+}
-+
-+static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid)
-+{
-+ dwc_cc_t *cc;
-+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
-+ if (cc->uid == uid) {
-+ return cc;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+static unsigned int cc_data_size(dwc_cc_if_t *cc_if)
-+{
-+ unsigned int size = 0;
-+ dwc_cc_t *cc;
-+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
-+ size += (48 + 1);
-+ if (cc->name) {
-+ size += cc->length;
-+ }
-+ }
-+ return size;
-+}
-+
-+static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
-+{
-+ uint32_t uid = 0;
-+ dwc_cc_t *cc;
-+
-+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
-+ if (DWC_MEMCMP(cc->chid, chid, 16) == 0) {
-+ uid = cc->uid;
-+ break;
-+ }
-+ }
-+ return uid;
-+}
-+static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
-+{
-+ uint32_t uid = 0;
-+ dwc_cc_t *cc;
-+
-+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
-+ if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) {
-+ uid = cc->uid;
-+ break;
-+ }
-+ }
-+ return uid;
-+}
-+
-+/* Internal cc_add */
-+static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
-+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
-+{
-+ dwc_cc_t *cc;
-+ uint32_t uid;
-+
-+ if (cc_if->is_host) {
-+ uid = cc_match_cdid(cc_if, cdid);
-+ }
-+ else {
-+ uid = cc_match_chid(cc_if, chid);
-+ }
-+
-+ if (uid) {
-+ DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length);
-+ cc = cc_find(cc_if, uid);
-+ }
-+ else {
-+ cc = alloc_cc(mem_ctx, name, length);
-+ cc->uid = next_uid(cc_if);
-+ DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry);
-+ }
-+
-+ DWC_MEMCPY(&(cc->chid[0]), chid, 16);
-+ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
-+ DWC_MEMCPY(&(cc->ck[0]), ck, 16);
-+
-+ DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length);
-+ dump_bytes("CHID", cc->chid, 16);
-+ dump_bytes("CDID", cc->cdid, 16);
-+ dump_bytes("CK", cc->ck, 16);
-+ return cc->uid;
-+}
-+
-+/* Internal cc_clear */
-+static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
-+{
-+ while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) {
-+ dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list);
-+ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
-+ free_cc(mem_ctx, cc);
-+ }
-+}
-+
-+dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
-+ dwc_notifier_t *notifier, unsigned is_host)
-+{
-+ dwc_cc_if_t *cc_if = NULL;
-+
-+ /* Allocate a common_cc_if structure */
-+ cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t));
-+
-+ if (!cc_if)
-+ return NULL;
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
-+ DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex);
-+#else
-+ cc_if->mutex = dwc_mutex_alloc(mtx_ctx);
-+#endif
-+ if (!cc_if->mutex) {
-+ dwc_free(mem_ctx, cc_if);
-+ return NULL;
-+ }
-+
-+ DWC_CIRCLEQ_INIT(&cc_if->list);
-+ cc_if->is_host = is_host;
-+ cc_if->notifier = notifier;
-+ return cc_if;
-+}
-+
-+void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if)
-+{
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
-+ DWC_MUTEX_FREE(cc_if->mutex);
-+#else
-+ dwc_mutex_free(mtx_ctx, cc_if->mutex);
-+#endif
-+ cc_clear(mem_ctx, cc_if);
-+ dwc_free(mem_ctx, cc_if);
-+}
-+
-+static void cc_changed(dwc_cc_if_t *cc_if)
-+{
-+ if (cc_if->notifier) {
-+ dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if);
-+ }
-+}
-+
-+void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
-+{
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc_clear(mem_ctx, cc_if);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ cc_changed(cc_if);
-+}
-+
-+int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
-+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
-+{
-+ uint32_t uid;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ cc_changed(cc_if);
-+
-+ return uid;
-+}
-+
-+void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid,
-+ uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
-+{
-+ dwc_cc_t* cc;
-+
-+ DWC_DEBUGC("Change connection context %d", id);
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc = cc_find(cc_if, id);
-+ if (!cc) {
-+ DWC_ERROR("Uid %d not found in cc list\n", id);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return;
-+ }
-+
-+ if (chid) {
-+ DWC_MEMCPY(&(cc->chid[0]), chid, 16);
-+ }
-+ if (cdid) {
-+ DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
-+ }
-+ if (ck) {
-+ DWC_MEMCPY(&(cc->ck[0]), ck, 16);
-+ }
-+
-+ if (name) {
-+ if (cc->name) {
-+ dwc_free(mem_ctx, cc->name);
-+ }
-+ cc->name = dwc_alloc(mem_ctx, length);
-+ if (!cc->name) {
-+ DWC_ERROR("Out of memory in dwc_cc_change()\n");
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return;
-+ }
-+ cc->length = length;
-+ DWC_MEMCPY(cc->name, name, length);
-+ }
-+
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ cc_changed(cc_if);
-+
-+ DWC_DEBUGC("Changed connection context id=%d\n", id);
-+ dump_bytes("New CHID", cc->chid, 16);
-+ dump_bytes("New CDID", cc->cdid, 16);
-+ dump_bytes("New CK", cc->ck, 16);
-+}
-+
-+void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id)
-+{
-+ dwc_cc_t *cc;
-+
-+ DWC_DEBUGC("Removing connection context %d", id);
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc = cc_find(cc_if, id);
-+ if (!cc) {
-+ DWC_ERROR("Uid %d not found in cc list\n", id);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return;
-+ }
-+
-+ DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ free_cc(mem_ctx, cc);
-+
-+ cc_changed(cc_if);
-+}
-+
-+uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length)
-+{
-+ uint8_t *buf, *x;
-+ uint8_t zero = 0;
-+ dwc_cc_t *cc;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ *length = cc_data_size(cc_if);
-+ if (!(*length)) {
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return NULL;
-+ }
-+
-+ DWC_DEBUGC("Creating data for saving (length=%d)", *length);
-+
-+ buf = dwc_alloc(mem_ctx, *length);
-+ if (!buf) {
-+ *length = 0;
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return NULL;
-+ }
-+
-+ x = buf;
-+ DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
-+ DWC_MEMCPY(x, cc->chid, 16);
-+ x += 16;
-+ DWC_MEMCPY(x, cc->cdid, 16);
-+ x += 16;
-+ DWC_MEMCPY(x, cc->ck, 16);
-+ x += 16;
-+ if (cc->name) {
-+ DWC_MEMCPY(x, &cc->length, 1);
-+ x += 1;
-+ DWC_MEMCPY(x, cc->name, cc->length);
-+ x += cc->length;
-+ }
-+ else {
-+ DWC_MEMCPY(x, &zero, 1);
-+ x += 1;
-+ }
-+ }
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ return buf;
-+}
-+
-+void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length)
-+{
-+ uint8_t name_length;
-+ uint8_t *name;
-+ uint8_t *chid;
-+ uint8_t *cdid;
-+ uint8_t *ck;
-+ uint32_t i = 0;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc_clear(mem_ctx, cc_if);
-+
-+ while (i < length) {
-+ chid = &data[i];
-+ i += 16;
-+ cdid = &data[i];
-+ i += 16;
-+ ck = &data[i];
-+ i += 16;
-+
-+ name_length = data[i];
-+ i ++;
-+
-+ if (name_length) {
-+ name = &data[i];
-+ i += name_length;
-+ }
-+ else {
-+ name = NULL;
-+ }
-+
-+ /* check to see if we haven't overflown the buffer */
-+ if (i > length) {
-+ DWC_ERROR("Data format error while attempting to load CCs "
-+ "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length);
-+ break;
-+ }
-+
-+ cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length);
-+ }
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ cc_changed(cc_if);
-+}
-+
-+uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
-+{
-+ uint32_t uid = 0;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ uid = cc_match_chid(cc_if, chid);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return uid;
-+}
-+uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
-+{
-+ uint32_t uid = 0;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ uid = cc_match_cdid(cc_if, cdid);
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+ return uid;
-+}
-+
-+uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id)
-+{
-+ uint8_t *ck = NULL;
-+ dwc_cc_t *cc;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc = cc_find(cc_if, id);
-+ if (cc) {
-+ ck = cc->ck;
-+ }
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ return ck;
-+
-+}
-+
-+uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id)
-+{
-+ uint8_t *retval = NULL;
-+ dwc_cc_t *cc;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc = cc_find(cc_if, id);
-+ if (cc) {
-+ retval = cc->chid;
-+ }
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ return retval;
-+}
-+
-+uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id)
-+{
-+ uint8_t *retval = NULL;
-+ dwc_cc_t *cc;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ cc = cc_find(cc_if, id);
-+ if (cc) {
-+ retval = cc->cdid;
-+ }
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ return retval;
-+}
-+
-+uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length)
-+{
-+ uint8_t *retval = NULL;
-+ dwc_cc_t *cc;
-+
-+ DWC_MUTEX_LOCK(cc_if->mutex);
-+ *length = 0;
-+ cc = cc_find(cc_if, id);
-+ if (cc) {
-+ *length = cc->length;
-+ retval = cc->name;
-+ }
-+ DWC_MUTEX_UNLOCK(cc_if->mutex);
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_CCLIB */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_cc.h
-@@ -0,0 +1,224 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $
-+ * $Revision: #4 $
-+ * $Date: 2010/09/28 $
-+ * $Change: 1596182 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+#ifndef _DWC_CC_H_
-+#define _DWC_CC_H_
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/** @file
-+ *
-+ * This file defines the Context Context library.
-+ *
-+ * The main data structure is dwc_cc_if_t which is returned by either the
-+ * dwc_cc_if_alloc function or returned by the module to the user via a provided
-+ * function. The data structure is opaque and should only be manipulated via the
-+ * functions provied in this API.
-+ *
-+ * It manages a list of connection contexts and operations can be performed to
-+ * add, remove, query, search, and change, those contexts. Additionally,
-+ * a dwc_notifier_t object can be requested from the manager so that
-+ * the user can be notified whenever the context list has changed.
-+ */
-+
-+#include "dwc_os.h"
-+#include "dwc_list.h"
-+#include "dwc_notifier.h"
-+
-+
-+/* Notifications */
-+#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION"
-+
-+struct dwc_cc_if;
-+typedef struct dwc_cc_if dwc_cc_if_t;
-+
-+
-+/** @name Connection Context Operations */
-+/** @{ */
-+
-+/** This function allocates memory for a dwc_cc_if_t structure, initializes
-+ * fields to default values, and returns a pointer to the structure or NULL on
-+ * error. */
-+extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
-+ dwc_notifier_t *notifier, unsigned is_host);
-+
-+/** Frees the memory for the specified CC structure allocated from
-+ * dwc_cc_if_alloc(). */
-+extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if);
-+
-+/** Removes all contexts from the connection context list */
-+extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if);
-+
-+/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list.
-+ * If a CHID already exists, the CK and name are overwritten. Statistics are
-+ * not overwritten.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param chid A pointer to the 16-byte CHID. This value will be copied.
-+ * @param ck A pointer to the 16-byte CK. This value will be copied.
-+ * @param cdid A pointer to the 16-byte CDID. This value will be copied.
-+ * @param name An optional host friendly name as defined in the association model
-+ * spec. Must be a UTF16-LE unicode string. Can be NULL to indicated no name.
-+ * @param length The length othe unicode string.
-+ * @return A unique identifier used to refer to this context that is valid for
-+ * as long as this context is still in the list. */
-+extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
-+ uint8_t *cdid, uint8_t *ck, uint8_t *name,
-+ uint8_t length);
-+
-+/** Changes the CHID, CK, CDID, or Name values of a connection context in the
-+ * list, preserving any accumulated statistics. This would typically be called
-+ * if the host decideds to change the context with a SET_CONNECTION request.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param id The identifier of the connection context.
-+ * @param chid A pointer to the 16-byte CHID. This value will be copied. NULL
-+ * indicates no change.
-+ * @param cdid A pointer to the 16-byte CDID. This value will be copied. NULL
-+ * indicates no change.
-+ * @param ck A pointer to the 16-byte CK. This value will be copied. NULL
-+ * indicates no change.
-+ * @param name Host friendly name UTF16-LE. NULL indicates no change.
-+ * @param length Length of name. */
-+extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id,
-+ uint8_t *chid, uint8_t *cdid, uint8_t *ck,
-+ uint8_t *name, uint8_t length);
-+
-+/** Remove the specified connection context.
-+ * @param cc_if The cc_if structure.
-+ * @param id The identifier of the connection context to remove. */
-+extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id);
-+
-+/** Get a binary block of data for the connection context list and attributes.
-+ * This data can be used by the OS specific driver to save the connection
-+ * context list into non-volatile memory.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param length Return the length of the data buffer.
-+ * @return A pointer to the data buffer. The memory for this buffer should be
-+ * freed with DWC_FREE() after use. */
-+extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if,
-+ unsigned int *length);
-+
-+/** Restore the connection context list from the binary data that was previously
-+ * returned from a call to dwc_cc_data_for_save. This can be used by the OS specific
-+ * driver to load a connection context list from non-volatile memory.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param data The data bytes as returned from dwc_cc_data_for_save.
-+ * @param length The length of the data. */
-+extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if,
-+ uint8_t *data, unsigned int length);
-+
-+/** Find the connection context from the specified CHID.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param chid A pointer to the CHID data.
-+ * @return A non-zero identifier of the connection context if the CHID matches.
-+ * Otherwise returns 0. */
-+extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid);
-+
-+/** Find the connection context from the specified CDID.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param cdid A pointer to the CDID data.
-+ * @return A non-zero identifier of the connection context if the CHID matches.
-+ * Otherwise returns 0. */
-+extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid);
-+
-+/** Retrieve the CK from the specified connection context.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param id The identifier of the connection context.
-+ * @return A pointer to the CK data. The memory does not need to be freed. */
-+extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id);
-+
-+/** Retrieve the CHID from the specified connection context.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param id The identifier of the connection context.
-+ * @return A pointer to the CHID data. The memory does not need to be freed. */
-+extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id);
-+
-+/** Retrieve the CDID from the specified connection context.
-+ *
-+ * @param cc_if The cc_if structure.
-+ * @param id The identifier of the connection context.
-+ * @return A pointer to the CDID data. The memory does not need to be freed. */
-+extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id);
-+
-+extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length);
-+
-+/** Checks a buffer for non-zero.
-+ * @param id A pointer to a 16 byte buffer.
-+ * @return true if the 16 byte value is non-zero. */
-+static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) {
-+ int i;
-+ for (i=0; i<16; i++) {
-+ if (id[i]) return 1;
-+ }
-+ return 0;
-+}
-+
-+/** Checks a buffer for zero.
-+ * @param id A pointer to a 16 byte buffer.
-+ * @return true if the 16 byte value is zero. */
-+static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) {
-+ return !dwc_assoc_is_not_zero_id(id);
-+}
-+
-+/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into
-+ * buffer. */
-+static inline int dwc_print_id_string(char *buffer, uint8_t *id) {
-+ char *ptr = buffer;
-+ int i;
-+ for (i=0; i<16; i++) {
-+ ptr += DWC_SPRINTF(ptr, "%02x", id[i]);
-+ if (i < 15) {
-+ ptr += DWC_SPRINTF(ptr, " ");
-+ }
-+ }
-+ return ptr - buffer;
-+}
-+
-+/** @} */
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _DWC_CC_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
-@@ -0,0 +1,1308 @@
-+#include "dwc_os.h"
-+#include "dwc_list.h"
-+
-+#ifdef DWC_CCLIB
-+# include "dwc_cc.h"
-+#endif
-+
-+#ifdef DWC_CRYPTOLIB
-+# include "dwc_modpow.h"
-+# include "dwc_dh.h"
-+# include "dwc_crypto.h"
-+#endif
-+
-+#ifdef DWC_NOTIFYLIB
-+# include "dwc_notifier.h"
-+#endif
-+
-+/* OS-Level Implementations */
-+
-+/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */
-+
-+
-+/* MISC */
-+
-+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
-+{
-+ return memset(dest, byte, size);
-+}
-+
-+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
-+{
-+ return memcpy(dest, src, size);
-+}
-+
-+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
-+{
-+ bcopy(src, dest, size);
-+ return dest;
-+}
-+
-+int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
-+{
-+ return memcmp(m1, m2, size);
-+}
-+
-+int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
-+{
-+ return strncmp(s1, s2, size);
-+}
-+
-+int DWC_STRCMP(void *s1, void *s2)
-+{
-+ return strcmp(s1, s2);
-+}
-+
-+int DWC_STRLEN(char const *str)
-+{
-+ return strlen(str);
-+}
-+
-+char *DWC_STRCPY(char *to, char const *from)
-+{
-+ return strcpy(to, from);
-+}
-+
-+char *DWC_STRDUP(char const *str)
-+{
-+ int len = DWC_STRLEN(str) + 1;
-+ char *new = DWC_ALLOC_ATOMIC(len);
-+
-+ if (!new) {
-+ return NULL;
-+ }
-+
-+ DWC_MEMCPY(new, str, len);
-+ return new;
-+}
-+
-+int DWC_ATOI(char *str, int32_t *value)
-+{
-+ char *end = NULL;
-+
-+ *value = strtol(str, &end, 0);
-+ if (*end == '\0') {
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+int DWC_ATOUI(char *str, uint32_t *value)
-+{
-+ char *end = NULL;
-+
-+ *value = strtoul(str, &end, 0);
-+ if (*end == '\0') {
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+
-+#ifdef DWC_UTFLIB
-+/* From usbstring.c */
-+
-+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
-+{
-+ int count = 0;
-+ u8 c;
-+ u16 uchar;
-+
-+ /* this insists on correct encodings, though not minimal ones.
-+ * BUT it currently rejects legit 4-byte UTF-8 code points,
-+ * which need surrogate pairs. (Unicode 3.1 can use them.)
-+ */
-+ while (len != 0 && (c = (u8) *s++) != 0) {
-+ if (unlikely(c & 0x80)) {
-+ // 2-byte sequence:
-+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-+ if ((c & 0xe0) == 0xc0) {
-+ uchar = (c & 0x1f) << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ // 3-byte sequence (most CJKV characters):
-+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-+ } else if ((c & 0xf0) == 0xe0) {
-+ uchar = (c & 0x0f) << 12;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ /* no bogus surrogates */
-+ if (0xd800 <= uchar && uchar <= 0xdfff)
-+ goto fail;
-+
-+ // 4-byte sequence (surrogate pairs, currently rare):
-+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-+ // (uuuuu = wwww + 1)
-+ // FIXME accept the surrogate code points (only)
-+ } else
-+ goto fail;
-+ } else
-+ uchar = c;
-+ put_unaligned (cpu_to_le16 (uchar), cp++);
-+ count++;
-+ len--;
-+ }
-+ return count;
-+fail:
-+ return -1;
-+}
-+
-+#endif /* DWC_UTFLIB */
-+
-+
-+/* dwc_debug.h */
-+
-+dwc_bool_t DWC_IN_IRQ(void)
-+{
-+// return in_irq();
-+ return 0;
-+}
-+
-+dwc_bool_t DWC_IN_BH(void)
-+{
-+// return in_softirq();
-+ return 0;
-+}
-+
-+void DWC_VPRINTF(char *format, va_list args)
-+{
-+ vprintf(format, args);
-+}
-+
-+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
-+{
-+ return vsnprintf(str, size, format, args);
-+}
-+
-+void DWC_PRINTF(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+int DWC_SPRINTF(char *buffer, char *format, ...)
-+{
-+ int retval;
-+ va_list args;
-+
-+ va_start(args, format);
-+ retval = vsprintf(buffer, format, args);
-+ va_end(args);
-+ return retval;
-+}
-+
-+int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
-+{
-+ int retval;
-+ va_list args;
-+
-+ va_start(args, format);
-+ retval = vsnprintf(buffer, size, format, args);
-+ va_end(args);
-+ return retval;
-+}
-+
-+void __DWC_WARN(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+void __DWC_ERROR(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+void DWC_EXCEPTION(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+// BUG_ON(1); ???
-+}
-+
-+#ifdef DEBUG
-+void __DWC_DEBUG(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+#endif
-+
-+
-+/* dwc_mem.h */
-+
-+#if 0
-+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
-+ uint32_t align,
-+ uint32_t alloc)
-+{
-+ struct dma_pool *pool = dma_pool_create("Pool", NULL,
-+ size, align, alloc);
-+ return (dwc_pool_t *)pool;
-+}
-+
-+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
-+{
-+ dma_pool_destroy((struct dma_pool *)pool);
-+}
-+
-+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
-+{
-+// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
-+ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
-+}
-+
-+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
-+{
-+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
-+ memset(..);
-+}
-+
-+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
-+{
-+ dma_pool_free(pool, vaddr, daddr);
-+}
-+#endif
-+
-+static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
-+{
-+ if (error)
-+ return;
-+ *(bus_addr_t *)arg = segs[0].ds_addr;
-+}
-+
-+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
-+{
-+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
-+ int error;
-+
-+ error = bus_dma_tag_create(
-+#if __FreeBSD_version >= 700000
-+ bus_get_dma_tag(dma->dev), /* parent */
-+#else
-+ NULL, /* parent */
-+#endif
-+ 4, 0, /* alignment, bounds */
-+ BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
-+ BUS_SPACE_MAXADDR, /* highaddr */
-+ NULL, NULL, /* filter, filterarg */
-+ size, /* maxsize */
-+ 1, /* nsegments */
-+ size, /* maxsegsize */
-+ 0, /* flags */
-+ NULL, /* lockfunc */
-+ NULL, /* lockarg */
-+ &dma->dma_tag);
-+ if (error) {
-+ device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n",
-+ __func__, error);
-+ goto fail_0;
-+ }
-+
-+ error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr,
-+ BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map);
-+ if (error) {
-+ device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n",
-+ __func__, (uintmax_t)size, error);
-+ goto fail_1;
-+ }
-+
-+ dma->dma_paddr = 0;
-+ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size,
-+ dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT);
-+ if (error || dma->dma_paddr == 0) {
-+ device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n",
-+ __func__, error);
-+ goto fail_2;
-+ }
-+
-+ *dma_addr = dma->dma_paddr;
-+ return dma->dma_vaddr;
-+
-+fail_2:
-+ bus_dmamap_unload(dma->dma_tag, dma->dma_map);
-+fail_1:
-+ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
-+ bus_dma_tag_destroy(dma->dma_tag);
-+fail_0:
-+ dma->dma_map = NULL;
-+ dma->dma_tag = NULL;
-+
-+ return NULL;
-+}
-+
-+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
-+{
-+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
-+
-+ if (dma->dma_tag == NULL)
-+ return;
-+ if (dma->dma_map != NULL) {
-+ bus_dmamap_sync(dma->dma_tag, dma->dma_map,
-+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
-+ bus_dmamap_unload(dma->dma_tag, dma->dma_map);
-+ bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
-+ dma->dma_map = NULL;
-+ }
-+
-+ bus_dma_tag_destroy(dma->dma_tag);
-+ dma->dma_tag = NULL;
-+}
-+
-+void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
-+{
-+ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
-+}
-+
-+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
-+{
-+ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
-+}
-+
-+void __DWC_FREE(void *mem_ctx, void *addr)
-+{
-+ free(addr, M_DEVBUF);
-+}
-+
-+
-+#ifdef DWC_CRYPTOLIB
-+/* dwc_crypto.h */
-+
-+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
-+{
-+ get_random_bytes(buffer, length);
-+}
-+
-+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
-+{
-+ struct crypto_blkcipher *tfm;
-+ struct blkcipher_desc desc;
-+ struct scatterlist sgd;
-+ struct scatterlist sgs;
-+
-+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
-+ if (tfm == NULL) {
-+ printk("failed to load transform for aes CBC\n");
-+ return -1;
-+ }
-+
-+ crypto_blkcipher_setkey(tfm, key, keylen);
-+ crypto_blkcipher_set_iv(tfm, iv, 16);
-+
-+ sg_init_one(&sgd, out, messagelen);
-+ sg_init_one(&sgs, message, messagelen);
-+
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
-+ crypto_free_blkcipher(tfm);
-+ DWC_ERROR("AES CBC encryption failed");
-+ return -1;
-+ }
-+
-+ crypto_free_blkcipher(tfm);
-+ return 0;
-+}
-+
-+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
-+{
-+ struct crypto_hash *tfm;
-+ struct hash_desc desc;
-+ struct scatterlist sg;
-+
-+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
-+ if (IS_ERR(tfm)) {
-+ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
-+ return 0;
-+ }
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ sg_init_one(&sg, message, len);
-+ crypto_hash_digest(&desc, &sg, len, out);
-+ crypto_free_hash(tfm);
-+
-+ return 1;
-+}
-+
-+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
-+ uint8_t *key, uint32_t keylen, uint8_t *out)
-+{
-+ struct crypto_hash *tfm;
-+ struct hash_desc desc;
-+ struct scatterlist sg;
-+
-+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
-+ if (IS_ERR(tfm)) {
-+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
-+ return 0;
-+ }
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ sg_init_one(&sg, message, messagelen);
-+ crypto_hash_setkey(tfm, key, keylen);
-+ crypto_hash_digest(&desc, &sg, messagelen, out);
-+ crypto_free_hash(tfm);
-+
-+ return 1;
-+}
-+
-+#endif /* DWC_CRYPTOLIB */
-+
-+
-+/* Byte Ordering Conversions */
-+
-+uint32_t DWC_CPU_TO_LE32(uint32_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_CPU_TO_BE32(uint32_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_LE32_TO_CPU(uint32_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_BE32_TO_CPU(uint32_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint16_t DWC_CPU_TO_LE16(uint16_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_CPU_TO_BE16(uint16_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_LE16_TO_CPU(uint16_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_BE16_TO_CPU(uint16_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+
-+/* Registers */
-+
-+uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ return bus_space_read_4(io->iot, io->ioh, ior);
-+}
-+
-+#if 0
-+uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ return bus_space_read_8(io->iot, io->ioh, ior);
-+}
-+#endif
-+
-+void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_4(io->iot, io->ioh, ior, value);
-+}
-+
-+#if 0
-+void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_8(io->iot, io->ioh, ior, value);
-+}
-+#endif
-+
-+void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
-+ uint32_t set_mask)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_4(io->iot, io->ioh, ior,
-+ (bus_space_read_4(io->iot, io->ioh, ior) &
-+ ~clear_mask) | set_mask);
-+}
-+
-+#if 0
-+void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
-+ uint64_t set_mask)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_8(io->iot, io->ioh, ior,
-+ (bus_space_read_8(io->iot, io->ioh, ior) &
-+ ~clear_mask) | set_mask);
-+}
-+#endif
-+
-+
-+/* Locking */
-+
-+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
-+{
-+ struct mtx *sl = DWC_ALLOC(sizeof(*sl));
-+
-+ if (!sl) {
-+ DWC_ERROR("Cannot allocate memory for spinlock");
-+ return NULL;
-+ }
-+
-+ mtx_init(sl, "dw3spn", NULL, MTX_SPIN);
-+ return (dwc_spinlock_t *)sl;
-+}
-+
-+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
-+{
-+ struct mtx *sl = (struct mtx *)lock;
-+
-+ mtx_destroy(sl);
-+ DWC_FREE(sl);
-+}
-+
-+void DWC_SPINLOCK(dwc_spinlock_t *lock)
-+{
-+ mtx_lock_spin((struct mtx *)lock); // ???
-+}
-+
-+void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
-+{
-+ mtx_unlock_spin((struct mtx *)lock); // ???
-+}
-+
-+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
-+{
-+ mtx_lock_spin((struct mtx *)lock);
-+}
-+
-+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
-+{
-+ mtx_unlock_spin((struct mtx *)lock);
-+}
-+
-+dwc_mutex_t *DWC_MUTEX_ALLOC(void)
-+{
-+ struct mtx *m;
-+ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx));
-+
-+ if (!mutex) {
-+ DWC_ERROR("Cannot allocate memory for mutex");
-+ return NULL;
-+ }
-+
-+ m = (struct mtx *)mutex;
-+ mtx_init(m, "dw3mtx", NULL, MTX_DEF);
-+ return mutex;
-+}
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
-+#else
-+void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
-+{
-+ mtx_destroy((struct mtx *)mutex);
-+ DWC_FREE(mutex);
-+}
-+#endif
-+
-+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
-+{
-+ struct mtx *m = (struct mtx *)mutex;
-+
-+ mtx_lock(m);
-+}
-+
-+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
-+{
-+ struct mtx *m = (struct mtx *)mutex;
-+
-+ return mtx_trylock(m);
-+}
-+
-+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
-+{
-+ struct mtx *m = (struct mtx *)mutex;
-+
-+ mtx_unlock(m);
-+}
-+
-+
-+/* Timing */
-+
-+void DWC_UDELAY(uint32_t usecs)
-+{
-+ DELAY(usecs);
-+}
-+
-+void DWC_MDELAY(uint32_t msecs)
-+{
-+ do {
-+ DELAY(1000);
-+ } while (--msecs);
-+}
-+
-+void DWC_MSLEEP(uint32_t msecs)
-+{
-+ struct timeval tv;
-+
-+ tv.tv_sec = msecs / 1000;
-+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
-+ pause("dw3slp", tvtohz(&tv));
-+}
-+
-+uint32_t DWC_TIME(void)
-+{
-+ struct timeval tv;
-+
-+ microuptime(&tv); // or getmicrouptime? (less precise, but faster)
-+ return tv.tv_sec * 1000 + tv.tv_usec / 1000;
-+}
-+
-+
-+/* Timers */
-+
-+struct dwc_timer {
-+ struct callout t;
-+ char *name;
-+ dwc_spinlock_t *lock;
-+ dwc_timer_callback_t cb;
-+ void *data;
-+};
-+
-+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
-+{
-+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
-+
-+ if (!t) {
-+ DWC_ERROR("Cannot allocate memory for timer");
-+ return NULL;
-+ }
-+
-+ callout_init(&t->t, 1);
-+
-+ t->name = DWC_STRDUP(name);
-+ if (!t->name) {
-+ DWC_ERROR("Cannot allocate memory for timer->name");
-+ goto no_name;
-+ }
-+
-+ t->lock = DWC_SPINLOCK_ALLOC();
-+ if (!t->lock) {
-+ DWC_ERROR("Cannot allocate memory for lock");
-+ goto no_lock;
-+ }
-+
-+ t->cb = cb;
-+ t->data = data;
-+
-+ return t;
-+
-+ no_lock:
-+ DWC_FREE(t->name);
-+ no_name:
-+ DWC_FREE(t);
-+
-+ return NULL;
-+}
-+
-+void DWC_TIMER_FREE(dwc_timer_t *timer)
-+{
-+ callout_stop(&timer->t);
-+ DWC_SPINLOCK_FREE(timer->lock);
-+ DWC_FREE(timer->name);
-+ DWC_FREE(timer);
-+}
-+
-+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
-+{
-+ struct timeval tv;
-+
-+ tv.tv_sec = time / 1000;
-+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
-+ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
-+}
-+
-+void DWC_TIMER_CANCEL(dwc_timer_t *timer)
-+{
-+ callout_stop(&timer->t);
-+}
-+
-+
-+/* Wait Queues */
-+
-+struct dwc_waitq {
-+ struct mtx lock;
-+ int abort;
-+};
-+
-+dwc_waitq_t *DWC_WAITQ_ALLOC(void)
-+{
-+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
-+
-+ if (!wq) {
-+ DWC_ERROR("Cannot allocate memory for waitqueue");
-+ return NULL;
-+ }
-+
-+ mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF);
-+ wq->abort = 0;
-+
-+ return wq;
-+}
-+
-+void DWC_WAITQ_FREE(dwc_waitq_t *wq)
-+{
-+ mtx_destroy(&wq->lock);
-+ DWC_FREE(wq);
-+}
-+
-+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
-+{
-+// intrmask_t ipl;
-+ int result = 0;
-+
-+ mtx_lock(&wq->lock);
-+// ipl = splbio();
-+
-+ /* Skip the sleep if already aborted or triggered */
-+ if (!wq->abort && !cond(data)) {
-+// splx(ipl);
-+ result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout
-+// ipl = splbio();
-+ }
-+
-+ if (result == ERESTART) { // signaled - restart
-+ result = -DWC_E_RESTART;
-+
-+ } else if (result == EINTR) { // signaled - interrupt
-+ result = -DWC_E_ABORT;
-+
-+ } else if (wq->abort) {
-+ result = -DWC_E_ABORT;
-+
-+ } else {
-+ result = 0;
-+ }
-+
-+ wq->abort = 0;
-+// splx(ipl);
-+ mtx_unlock(&wq->lock);
-+ return result;
-+}
-+
-+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
-+ void *data, int32_t msecs)
-+{
-+ struct timeval tv, tv1, tv2;
-+// intrmask_t ipl;
-+ int result = 0;
-+
-+ tv.tv_sec = msecs / 1000;
-+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
-+
-+ mtx_lock(&wq->lock);
-+// ipl = splbio();
-+
-+ /* Skip the sleep if already aborted or triggered */
-+ if (!wq->abort && !cond(data)) {
-+// splx(ipl);
-+ getmicrouptime(&tv1);
-+ result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv));
-+ getmicrouptime(&tv2);
-+// ipl = splbio();
-+ }
-+
-+ if (result == 0) { // awoken
-+ if (wq->abort) {
-+ result = -DWC_E_ABORT;
-+ } else {
-+ tv2.tv_usec -= tv1.tv_usec;
-+ if (tv2.tv_usec < 0) {
-+ tv2.tv_usec += 1000000;
-+ tv2.tv_sec--;
-+ }
-+
-+ tv2.tv_sec -= tv1.tv_sec;
-+ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
-+ result = msecs - result;
-+ if (result <= 0)
-+ result = 1;
-+ }
-+ } else if (result == ERESTART) { // signaled - restart
-+ result = -DWC_E_RESTART;
-+
-+ } else if (result == EINTR) { // signaled - interrupt
-+ result = -DWC_E_ABORT;
-+
-+ } else { // timed out
-+ result = -DWC_E_TIMEOUT;
-+ }
-+
-+ wq->abort = 0;
-+// splx(ipl);
-+ mtx_unlock(&wq->lock);
-+ return result;
-+}
-+
-+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
-+{
-+ wakeup(wq);
-+}
-+
-+void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
-+{
-+// intrmask_t ipl;
-+
-+ mtx_lock(&wq->lock);
-+// ipl = splbio();
-+ wq->abort = 1;
-+ wakeup(wq);
-+// splx(ipl);
-+ mtx_unlock(&wq->lock);
-+}
-+
-+
-+/* Threading */
-+
-+struct dwc_thread {
-+ struct proc *proc;
-+ int abort;
-+};
-+
-+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
-+{
-+ int retval;
-+ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
-+
-+ if (!thread) {
-+ return NULL;
-+ }
-+
-+ thread->abort = 0;
-+ retval = kthread_create((void (*)(void *))func, data, &thread->proc,
-+ RFPROC | RFNOWAIT, 0, "%s", name);
-+ if (retval) {
-+ DWC_FREE(thread);
-+ return NULL;
-+ }
-+
-+ return thread;
-+}
-+
-+int DWC_THREAD_STOP(dwc_thread_t *thread)
-+{
-+ int retval;
-+
-+ thread->abort = 1;
-+ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
-+
-+ if (retval == 0) {
-+ /* DWC_THREAD_EXIT() will free the thread struct */
-+ return 0;
-+ }
-+
-+ /* NOTE: We leak the thread struct if thread doesn't die */
-+
-+ if (retval == EWOULDBLOCK) {
-+ return -DWC_E_TIMEOUT;
-+ }
-+
-+ return -DWC_E_UNKNOWN;
-+}
-+
-+dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
-+{
-+ return thread->abort;
-+}
-+
-+void DWC_THREAD_EXIT(dwc_thread_t *thread)
-+{
-+ wakeup(&thread->abort);
-+ DWC_FREE(thread);
-+ kthread_exit(0);
-+}
-+
-+
-+/* tasklets
-+ - Runs in interrupt context (cannot sleep)
-+ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ]
-+ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ]
-+ */
-+struct dwc_tasklet {
-+ struct task t;
-+ dwc_tasklet_callback_t cb;
-+ void *data;
-+};
-+
-+static void tasklet_callback(void *data, int pending) // what to do with pending ???
-+{
-+ dwc_tasklet_t *task = (dwc_tasklet_t *)data;
-+
-+ task->cb(task->data);
-+}
-+
-+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
-+{
-+ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
-+
-+ if (task) {
-+ task->cb = cb;
-+ task->data = data;
-+ TASK_INIT(&task->t, 0, tasklet_callback, task);
-+ } else {
-+ DWC_ERROR("Cannot allocate memory for tasklet");
-+ }
-+
-+ return task;
-+}
-+
-+void DWC_TASK_FREE(dwc_tasklet_t *task)
-+{
-+ taskqueue_drain(taskqueue_fast, &task->t); // ???
-+ DWC_FREE(task);
-+}
-+
-+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
-+{
-+ /* Uses predefined system queue */
-+ taskqueue_enqueue_fast(taskqueue_fast, &task->t);
-+}
-+
-+
-+/* workqueues
-+ - Runs in process context (can sleep)
-+ */
-+typedef struct work_container {
-+ dwc_work_callback_t cb;
-+ void *data;
-+ dwc_workq_t *wq;
-+ char *name;
-+ int hz;
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_ENTRY(work_container) entry;
-+#endif
-+ struct task task;
-+} work_container_t;
-+
-+#ifdef DEBUG
-+DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
-+#endif
-+
-+struct dwc_workq {
-+ struct taskqueue *taskq;
-+ dwc_spinlock_t *lock;
-+ dwc_waitq_t *waitq;
-+ int pending;
-+
-+#ifdef DEBUG
-+ struct work_container_queue entries;
-+#endif
-+};
-+
-+static void do_work(void *data, int pending) // what to do with pending ???
-+{
-+ work_container_t *container = (work_container_t *)data;
-+ dwc_workq_t *wq = container->wq;
-+ dwc_irqflags_t flags;
-+
-+ if (container->hz) {
-+ pause("dw3wrk", container->hz);
-+ }
-+
-+ container->cb(container->data);
-+ DWC_DEBUG("Work done: %s, container=%p", container->name, container);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
-+#endif
-+ if (container->name)
-+ DWC_FREE(container->name);
-+ DWC_FREE(container);
-+ wq->pending--;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+}
-+
-+static int work_done(void *data)
-+{
-+ dwc_workq_t *workq = (dwc_workq_t *)data;
-+
-+ return workq->pending == 0;
-+}
-+
-+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
-+{
-+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
-+}
-+
-+dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
-+{
-+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
-+
-+ if (!wq) {
-+ DWC_ERROR("Cannot allocate memory for workqueue");
-+ return NULL;
-+ }
-+
-+ wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq);
-+ if (!wq->taskq) {
-+ DWC_ERROR("Cannot allocate memory for taskqueue");
-+ goto no_taskq;
-+ }
-+
-+ wq->pending = 0;
-+
-+ wq->lock = DWC_SPINLOCK_ALLOC();
-+ if (!wq->lock) {
-+ DWC_ERROR("Cannot allocate memory for spinlock");
-+ goto no_lock;
-+ }
-+
-+ wq->waitq = DWC_WAITQ_ALLOC();
-+ if (!wq->waitq) {
-+ DWC_ERROR("Cannot allocate memory for waitqueue");
-+ goto no_waitq;
-+ }
-+
-+ taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk");
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_INIT(&wq->entries);
-+#endif
-+ return wq;
-+
-+ no_waitq:
-+ DWC_SPINLOCK_FREE(wq->lock);
-+ no_lock:
-+ taskqueue_free(wq->taskq);
-+ no_taskq:
-+ DWC_FREE(wq);
-+
-+ return NULL;
-+}
-+
-+void DWC_WORKQ_FREE(dwc_workq_t *wq)
-+{
-+#ifdef DEBUG
-+ dwc_irqflags_t flags;
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+
-+ if (wq->pending != 0) {
-+ struct work_container *container;
-+
-+ DWC_ERROR("Destroying work queue with pending work");
-+
-+ DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) {
-+ DWC_ERROR("Work %s still pending", container->name);
-+ }
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+#endif
-+ DWC_WAITQ_FREE(wq->waitq);
-+ DWC_SPINLOCK_FREE(wq->lock);
-+ taskqueue_free(wq->taskq);
-+ DWC_FREE(wq);
-+}
-+
-+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
-+ char *format, ...)
-+{
-+ dwc_irqflags_t flags;
-+ work_container_t *container;
-+ static char name[128];
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VSNPRINTF(name, 128, format, args);
-+ va_end(args);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending++;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+
-+ container = DWC_ALLOC_ATOMIC(sizeof(*container));
-+ if (!container) {
-+ DWC_ERROR("Cannot allocate memory for container");
-+ return;
-+ }
-+
-+ container->name = DWC_STRDUP(name);
-+ if (!container->name) {
-+ DWC_ERROR("Cannot allocate memory for container->name");
-+ DWC_FREE(container);
-+ return;
-+ }
-+
-+ container->cb = cb;
-+ container->data = data;
-+ container->wq = wq;
-+ container->hz = 0;
-+
-+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
-+
-+ TASK_INIT(&container->task, 0, do_work, container);
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
-+#endif
-+ taskqueue_enqueue_fast(wq->taskq, &container->task);
-+}
-+
-+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
-+ void *data, uint32_t time, char *format, ...)
-+{
-+ dwc_irqflags_t flags;
-+ work_container_t *container;
-+ static char name[128];
-+ struct timeval tv;
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VSNPRINTF(name, 128, format, args);
-+ va_end(args);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending++;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+
-+ container = DWC_ALLOC_ATOMIC(sizeof(*container));
-+ if (!container) {
-+ DWC_ERROR("Cannot allocate memory for container");
-+ return;
-+ }
-+
-+ container->name = DWC_STRDUP(name);
-+ if (!container->name) {
-+ DWC_ERROR("Cannot allocate memory for container->name");
-+ DWC_FREE(container);
-+ return;
-+ }
-+
-+ container->cb = cb;
-+ container->data = data;
-+ container->wq = wq;
-+
-+ tv.tv_sec = time / 1000;
-+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
-+ container->hz = tvtohz(&tv);
-+
-+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
-+
-+ TASK_INIT(&container->task, 0, do_work, container);
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
-+#endif
-+ taskqueue_enqueue_fast(wq->taskq, &container->task);
-+}
-+
-+int DWC_WORKQ_PENDING(dwc_workq_t *wq)
-+{
-+ return wq->pending;
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c
-@@ -0,0 +1,1418 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kthread.h>
-+
-+#ifdef DWC_CCLIB
-+# include "dwc_cc.h"
-+#endif
-+
-+#ifdef DWC_CRYPTOLIB
-+# include "dwc_modpow.h"
-+# include "dwc_dh.h"
-+# include "dwc_crypto.h"
-+#endif
-+
-+#ifdef DWC_NOTIFYLIB
-+# include "dwc_notifier.h"
-+#endif
-+
-+/* OS-Level Implementations */
-+
-+/* This is the Linux kernel implementation of the DWC platform library. */
-+#include <linux/moduleparam.h>
-+#include <linux/ctype.h>
-+#include <linux/crypto.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/cdev.h>
-+#include <linux/errno.h>
-+#include <linux/interrupt.h>
-+#include <linux/jiffies.h>
-+#include <linux/list.h>
-+#include <linux/pci.h>
-+#include <linux/random.h>
-+#include <linux/scatterlist.h>
-+#include <linux/slab.h>
-+#include <linux/stat.h>
-+#include <linux/string.h>
-+#include <linux/timer.h>
-+#include <linux/usb.h>
-+
-+#include <linux/version.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-+# include <linux/usb/gadget.h>
-+#else
-+# include <linux/usb_gadget.h>
-+#endif
-+
-+#include <asm/io.h>
-+#include <asm/page.h>
-+#include <asm/uaccess.h>
-+#include <asm/unaligned.h>
-+
-+#include "dwc_os.h"
-+#include "dwc_list.h"
-+
-+
-+/* MISC */
-+
-+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
-+{
-+ return memset(dest, byte, size);
-+}
-+
-+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
-+{
-+ return memcpy(dest, src, size);
-+}
-+
-+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
-+{
-+ return memmove(dest, src, size);
-+}
-+
-+int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
-+{
-+ return memcmp(m1, m2, size);
-+}
-+
-+int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
-+{
-+ return strncmp(s1, s2, size);
-+}
-+
-+int DWC_STRCMP(void *s1, void *s2)
-+{
-+ return strcmp(s1, s2);
-+}
-+
-+int DWC_STRLEN(char const *str)
-+{
-+ return strlen(str);
-+}
-+
-+char *DWC_STRCPY(char *to, char const *from)
-+{
-+ return strcpy(to, from);
-+}
-+
-+char *DWC_STRDUP(char const *str)
-+{
-+ int len = DWC_STRLEN(str) + 1;
-+ char *new = DWC_ALLOC_ATOMIC(len);
-+
-+ if (!new) {
-+ return NULL;
-+ }
-+
-+ DWC_MEMCPY(new, str, len);
-+ return new;
-+}
-+
-+int DWC_ATOI(const char *str, int32_t *value)
-+{
-+ char *end = NULL;
-+
-+ *value = simple_strtol(str, &end, 0);
-+ if (*end == '\0') {
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+int DWC_ATOUI(const char *str, uint32_t *value)
-+{
-+ char *end = NULL;
-+
-+ *value = simple_strtoul(str, &end, 0);
-+ if (*end == '\0') {
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+
-+#ifdef DWC_UTFLIB
-+/* From usbstring.c */
-+
-+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
-+{
-+ int count = 0;
-+ u8 c;
-+ u16 uchar;
-+
-+ /* this insists on correct encodings, though not minimal ones.
-+ * BUT it currently rejects legit 4-byte UTF-8 code points,
-+ * which need surrogate pairs. (Unicode 3.1 can use them.)
-+ */
-+ while (len != 0 && (c = (u8) *s++) != 0) {
-+ if (unlikely(c & 0x80)) {
-+ // 2-byte sequence:
-+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-+ if ((c & 0xe0) == 0xc0) {
-+ uchar = (c & 0x1f) << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ // 3-byte sequence (most CJKV characters):
-+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-+ } else if ((c & 0xf0) == 0xe0) {
-+ uchar = (c & 0x0f) << 12;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ /* no bogus surrogates */
-+ if (0xd800 <= uchar && uchar <= 0xdfff)
-+ goto fail;
-+
-+ // 4-byte sequence (surrogate pairs, currently rare):
-+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-+ // (uuuuu = wwww + 1)
-+ // FIXME accept the surrogate code points (only)
-+ } else
-+ goto fail;
-+ } else
-+ uchar = c;
-+ put_unaligned (cpu_to_le16 (uchar), cp++);
-+ count++;
-+ len--;
-+ }
-+ return count;
-+fail:
-+ return -1;
-+}
-+#endif /* DWC_UTFLIB */
-+
-+
-+/* dwc_debug.h */
-+
-+dwc_bool_t DWC_IN_IRQ(void)
-+{
-+ return in_irq();
-+}
-+
-+dwc_bool_t DWC_IN_BH(void)
-+{
-+ return in_softirq();
-+}
-+
-+void DWC_VPRINTF(char *format, va_list args)
-+{
-+ vprintk(format, args);
-+}
-+
-+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
-+{
-+ return vsnprintf(str, size, format, args);
-+}
-+
-+void DWC_PRINTF(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+int DWC_SPRINTF(char *buffer, char *format, ...)
-+{
-+ int retval;
-+ va_list args;
-+
-+ va_start(args, format);
-+ retval = vsprintf(buffer, format, args);
-+ va_end(args);
-+ return retval;
-+}
-+
-+int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
-+{
-+ int retval;
-+ va_list args;
-+
-+ va_start(args, format);
-+ retval = vsnprintf(buffer, size, format, args);
-+ va_end(args);
-+ return retval;
-+}
-+
-+void __DWC_WARN(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_PRINTF(KERN_WARNING);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+void __DWC_ERROR(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_PRINTF(KERN_ERR);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+void DWC_EXCEPTION(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_PRINTF(KERN_ERR);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+ BUG_ON(1);
-+}
-+
-+#ifdef DEBUG
-+void __DWC_DEBUG(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_PRINTF(KERN_DEBUG);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+#endif
-+
-+
-+/* dwc_mem.h */
-+
-+#if 0
-+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
-+ uint32_t align,
-+ uint32_t alloc)
-+{
-+ struct dma_pool *pool = dma_pool_create("Pool", NULL,
-+ size, align, alloc);
-+ return (dwc_pool_t *)pool;
-+}
-+
-+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
-+{
-+ dma_pool_destroy((struct dma_pool *)pool);
-+}
-+
-+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
-+{
-+ return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
-+}
-+
-+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
-+{
-+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
-+ memset(..);
-+}
-+
-+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
-+{
-+ dma_pool_free(pool, vaddr, daddr);
-+}
-+#endif
-+
-+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
-+{
-+ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_KERNEL | GFP_DMA32);
-+}
-+
-+void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
-+{
-+ return dma_zalloc_coherent(dma_ctx, size, dma_addr, GFP_ATOMIC);
-+}
-+
-+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
-+{
-+ dma_free_coherent(dma_ctx, size, virt_addr, dma_addr);
-+}
-+
-+void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
-+{
-+ return kzalloc(size, GFP_KERNEL);
-+}
-+
-+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
-+{
-+ return kzalloc(size, GFP_ATOMIC);
-+}
-+
-+void __DWC_FREE(void *mem_ctx, void *addr)
-+{
-+ kfree(addr);
-+}
-+
-+
-+#ifdef DWC_CRYPTOLIB
-+/* dwc_crypto.h */
-+
-+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
-+{
-+ get_random_bytes(buffer, length);
-+}
-+
-+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
-+{
-+ struct crypto_blkcipher *tfm;
-+ struct blkcipher_desc desc;
-+ struct scatterlist sgd;
-+ struct scatterlist sgs;
-+
-+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
-+ if (tfm == NULL) {
-+ printk("failed to load transform for aes CBC\n");
-+ return -1;
-+ }
-+
-+ crypto_blkcipher_setkey(tfm, key, keylen);
-+ crypto_blkcipher_set_iv(tfm, iv, 16);
-+
-+ sg_init_one(&sgd, out, messagelen);
-+ sg_init_one(&sgs, message, messagelen);
-+
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
-+ crypto_free_blkcipher(tfm);
-+ DWC_ERROR("AES CBC encryption failed");
-+ return -1;
-+ }
-+
-+ crypto_free_blkcipher(tfm);
-+ return 0;
-+}
-+
-+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
-+{
-+ struct crypto_hash *tfm;
-+ struct hash_desc desc;
-+ struct scatterlist sg;
-+
-+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
-+ if (IS_ERR(tfm)) {
-+ DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm));
-+ return 0;
-+ }
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ sg_init_one(&sg, message, len);
-+ crypto_hash_digest(&desc, &sg, len, out);
-+ crypto_free_hash(tfm);
-+
-+ return 1;
-+}
-+
-+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
-+ uint8_t *key, uint32_t keylen, uint8_t *out)
-+{
-+ struct crypto_hash *tfm;
-+ struct hash_desc desc;
-+ struct scatterlist sg;
-+
-+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
-+ if (IS_ERR(tfm)) {
-+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm));
-+ return 0;
-+ }
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ sg_init_one(&sg, message, messagelen);
-+ crypto_hash_setkey(tfm, key, keylen);
-+ crypto_hash_digest(&desc, &sg, messagelen, out);
-+ crypto_free_hash(tfm);
-+
-+ return 1;
-+}
-+#endif /* DWC_CRYPTOLIB */
-+
-+
-+/* Byte Ordering Conversions */
-+
-+uint32_t DWC_CPU_TO_LE32(uint32_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_CPU_TO_BE32(uint32_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_LE32_TO_CPU(uint32_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_BE32_TO_CPU(uint32_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint16_t DWC_CPU_TO_LE16(uint16_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_CPU_TO_BE16(uint16_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_LE16_TO_CPU(uint16_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_BE16_TO_CPU(uint16_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+
-+/* Registers */
-+
-+uint32_t DWC_READ_REG32(uint32_t volatile *reg)
-+{
-+ return readl(reg);
-+}
-+
-+#if 0
-+uint64_t DWC_READ_REG64(uint64_t volatile *reg)
-+{
-+}
-+#endif
-+
-+void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value)
-+{
-+ writel(value, reg);
-+}
-+
-+#if 0
-+void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value)
-+{
-+}
-+#endif
-+
-+void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask)
-+{
-+ writel((readl(reg) & ~clear_mask) | set_mask, reg);
-+}
-+
-+#if 0
-+void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask)
-+{
-+}
-+#endif
-+
-+
-+/* Locking */
-+
-+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
-+{
-+ spinlock_t *sl = (spinlock_t *)1;
-+
-+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
-+ sl = DWC_ALLOC(sizeof(*sl));
-+ if (!sl) {
-+ DWC_ERROR("Cannot allocate memory for spinlock\n");
-+ return NULL;
-+ }
-+
-+ spin_lock_init(sl);
-+#endif
-+ return (dwc_spinlock_t *)sl;
-+}
-+
-+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
-+{
-+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
-+ DWC_FREE(lock);
-+#endif
-+}
-+
-+void DWC_SPINLOCK(dwc_spinlock_t *lock)
-+{
-+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
-+ spin_lock((spinlock_t *)lock);
-+#endif
-+}
-+
-+void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
-+{
-+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
-+ spin_unlock((spinlock_t *)lock);
-+#endif
-+}
-+
-+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
-+{
-+ dwc_irqflags_t f;
-+
-+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
-+ spin_lock_irqsave((spinlock_t *)lock, f);
-+#else
-+ local_irq_save(f);
-+#endif
-+ *flags = f;
-+}
-+
-+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
-+{
-+#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
-+ spin_unlock_irqrestore((spinlock_t *)lock, flags);
-+#else
-+ local_irq_restore(flags);
-+#endif
-+}
-+
-+dwc_mutex_t *DWC_MUTEX_ALLOC(void)
-+{
-+ struct mutex *m;
-+ dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex));
-+
-+ if (!mutex) {
-+ DWC_ERROR("Cannot allocate memory for mutex\n");
-+ return NULL;
-+ }
-+
-+ m = (struct mutex *)mutex;
-+ mutex_init(m);
-+ return mutex;
-+}
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
-+#else
-+void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
-+{
-+ mutex_destroy((struct mutex *)mutex);
-+ DWC_FREE(mutex);
-+}
-+#endif
-+
-+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
-+{
-+ struct mutex *m = (struct mutex *)mutex;
-+ mutex_lock(m);
-+}
-+
-+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
-+{
-+ struct mutex *m = (struct mutex *)mutex;
-+ return mutex_trylock(m);
-+}
-+
-+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
-+{
-+ struct mutex *m = (struct mutex *)mutex;
-+ mutex_unlock(m);
-+}
-+
-+
-+/* Timing */
-+
-+void DWC_UDELAY(uint32_t usecs)
-+{
-+ udelay(usecs);
-+}
-+
-+void DWC_MDELAY(uint32_t msecs)
-+{
-+ mdelay(msecs);
-+}
-+
-+void DWC_MSLEEP(uint32_t msecs)
-+{
-+ msleep(msecs);
-+}
-+
-+uint32_t DWC_TIME(void)
-+{
-+ return jiffies_to_msecs(jiffies);
-+}
-+
-+
-+/* Timers */
-+
-+struct dwc_timer {
-+ struct timer_list *t;
-+ char *name;
-+ dwc_timer_callback_t cb;
-+ void *data;
-+ uint8_t scheduled;
-+ dwc_spinlock_t *lock;
-+};
-+
-+static void timer_callback(unsigned long data)
-+{
-+ dwc_timer_t *timer = (dwc_timer_t *)data;
-+ dwc_irqflags_t flags;
-+
-+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
-+ timer->scheduled = 0;
-+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
-+ DWC_DEBUGC("Timer %s callback", timer->name);
-+ timer->cb(timer->data);
-+}
-+
-+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
-+{
-+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
-+
-+ if (!t) {
-+ DWC_ERROR("Cannot allocate memory for timer");
-+ return NULL;
-+ }
-+
-+ t->t = DWC_ALLOC(sizeof(*t->t));
-+ if (!t->t) {
-+ DWC_ERROR("Cannot allocate memory for timer->t");
-+ goto no_timer;
-+ }
-+
-+ t->name = DWC_STRDUP(name);
-+ if (!t->name) {
-+ DWC_ERROR("Cannot allocate memory for timer->name");
-+ goto no_name;
-+ }
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK))
-+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(t->lock);
-+#else
-+ t->lock = DWC_SPINLOCK_ALLOC();
-+#endif
-+ if (!t->lock) {
-+ DWC_ERROR("Cannot allocate memory for lock");
-+ goto no_lock;
-+ }
-+
-+ t->scheduled = 0;
-+ t->t->expires = jiffies;
-+ setup_timer(t->t, timer_callback, (unsigned long)t);
-+
-+ t->cb = cb;
-+ t->data = data;
-+
-+ return t;
-+
-+ no_lock:
-+ DWC_FREE(t->name);
-+ no_name:
-+ DWC_FREE(t->t);
-+ no_timer:
-+ DWC_FREE(t);
-+ return NULL;
-+}
-+
-+void DWC_TIMER_FREE(dwc_timer_t *timer)
-+{
-+ dwc_irqflags_t flags;
-+
-+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
-+
-+ if (timer->scheduled) {
-+ del_timer(timer->t);
-+ timer->scheduled = 0;
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
-+ DWC_SPINLOCK_FREE(timer->lock);
-+ DWC_FREE(timer->t);
-+ DWC_FREE(timer->name);
-+ DWC_FREE(timer);
-+}
-+
-+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
-+{
-+ dwc_irqflags_t flags;
-+
-+ DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
-+
-+ if (!timer->scheduled) {
-+ timer->scheduled = 1;
-+ DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time);
-+ timer->t->expires = jiffies + msecs_to_jiffies(time);
-+ add_timer(timer->t);
-+ } else {
-+ DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time);
-+ mod_timer(timer->t, jiffies + msecs_to_jiffies(time));
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
-+}
-+
-+void DWC_TIMER_CANCEL(dwc_timer_t *timer)
-+{
-+ del_timer(timer->t);
-+}
-+
-+
-+/* Wait Queues */
-+
-+struct dwc_waitq {
-+ wait_queue_head_t queue;
-+ int abort;
-+};
-+
-+dwc_waitq_t *DWC_WAITQ_ALLOC(void)
-+{
-+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
-+
-+ if (!wq) {
-+ DWC_ERROR("Cannot allocate memory for waitqueue\n");
-+ return NULL;
-+ }
-+
-+ init_waitqueue_head(&wq->queue);
-+ wq->abort = 0;
-+ return wq;
-+}
-+
-+void DWC_WAITQ_FREE(dwc_waitq_t *wq)
-+{
-+ DWC_FREE(wq);
-+}
-+
-+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
-+{
-+ int result = wait_event_interruptible(wq->queue,
-+ cond(data) || wq->abort);
-+ if (result == -ERESTARTSYS) {
-+ wq->abort = 0;
-+ return -DWC_E_RESTART;
-+ }
-+
-+ if (wq->abort == 1) {
-+ wq->abort = 0;
-+ return -DWC_E_ABORT;
-+ }
-+
-+ wq->abort = 0;
-+
-+ if (result == 0) {
-+ return 0;
-+ }
-+
-+ return -DWC_E_UNKNOWN;
-+}
-+
-+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
-+ void *data, int32_t msecs)
-+{
-+ int32_t tmsecs;
-+ int result = wait_event_interruptible_timeout(wq->queue,
-+ cond(data) || wq->abort,
-+ msecs_to_jiffies(msecs));
-+ if (result == -ERESTARTSYS) {
-+ wq->abort = 0;
-+ return -DWC_E_RESTART;
-+ }
-+
-+ if (wq->abort == 1) {
-+ wq->abort = 0;
-+ return -DWC_E_ABORT;
-+ }
-+
-+ wq->abort = 0;
-+
-+ if (result > 0) {
-+ tmsecs = jiffies_to_msecs(result);
-+ if (!tmsecs) {
-+ return 1;
-+ }
-+
-+ return tmsecs;
-+ }
-+
-+ if (result == 0) {
-+ return -DWC_E_TIMEOUT;
-+ }
-+
-+ return -DWC_E_UNKNOWN;
-+}
-+
-+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
-+{
-+ wq->abort = 0;
-+ wake_up_interruptible(&wq->queue);
-+}
-+
-+void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
-+{
-+ wq->abort = 1;
-+ wake_up_interruptible(&wq->queue);
-+}
-+
-+
-+/* Threading */
-+
-+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
-+{
-+ struct task_struct *thread = kthread_run(func, data, name);
-+
-+ if (thread == ERR_PTR(-ENOMEM)) {
-+ return NULL;
-+ }
-+
-+ return (dwc_thread_t *)thread;
-+}
-+
-+int DWC_THREAD_STOP(dwc_thread_t *thread)
-+{
-+ return kthread_stop((struct task_struct *)thread);
-+}
-+
-+dwc_bool_t DWC_THREAD_SHOULD_STOP(void)
-+{
-+ return kthread_should_stop();
-+}
-+
-+
-+/* tasklets
-+ - run in interrupt context (cannot sleep)
-+ - each tasklet runs on a single CPU
-+ - different tasklets can be running simultaneously on different CPUs
-+ */
-+struct dwc_tasklet {
-+ struct tasklet_struct t;
-+ dwc_tasklet_callback_t cb;
-+ void *data;
-+};
-+
-+static void tasklet_callback(unsigned long data)
-+{
-+ dwc_tasklet_t *t = (dwc_tasklet_t *)data;
-+ t->cb(t->data);
-+}
-+
-+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
-+{
-+ dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t));
-+
-+ if (t) {
-+ t->cb = cb;
-+ t->data = data;
-+ tasklet_init(&t->t, tasklet_callback, (unsigned long)t);
-+ } else {
-+ DWC_ERROR("Cannot allocate memory for tasklet\n");
-+ }
-+
-+ return t;
-+}
-+
-+void DWC_TASK_FREE(dwc_tasklet_t *task)
-+{
-+ DWC_FREE(task);
-+}
-+
-+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
-+{
-+ tasklet_schedule(&task->t);
-+}
-+
-+void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task)
-+{
-+ tasklet_hi_schedule(&task->t);
-+}
-+
-+
-+/* workqueues
-+ - run in process context (can sleep)
-+ */
-+typedef struct work_container {
-+ dwc_work_callback_t cb;
-+ void *data;
-+ dwc_workq_t *wq;
-+ char *name;
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_ENTRY(work_container) entry;
-+#endif
-+ struct delayed_work work;
-+} work_container_t;
-+
-+#ifdef DEBUG
-+DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
-+#endif
-+
-+struct dwc_workq {
-+ struct workqueue_struct *wq;
-+ dwc_spinlock_t *lock;
-+ dwc_waitq_t *waitq;
-+ int pending;
-+
-+#ifdef DEBUG
-+ struct work_container_queue entries;
-+#endif
-+};
-+
-+static void do_work(struct work_struct *work)
-+{
-+ dwc_irqflags_t flags;
-+ struct delayed_work *dw = container_of(work, struct delayed_work, work);
-+ work_container_t *container = container_of(dw, struct work_container, work);
-+ dwc_workq_t *wq = container->wq;
-+
-+ container->cb(container->data);
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
-+#endif
-+ DWC_DEBUGC("Work done: %s, container=%p", container->name, container);
-+ if (container->name) {
-+ DWC_FREE(container->name);
-+ }
-+ DWC_FREE(container);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending--;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+}
-+
-+static int work_done(void *data)
-+{
-+ dwc_workq_t *workq = (dwc_workq_t *)data;
-+ return workq->pending == 0;
-+}
-+
-+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
-+{
-+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
-+}
-+
-+dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
-+{
-+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
-+
-+ if (!wq) {
-+ return NULL;
-+ }
-+
-+ wq->wq = create_singlethread_workqueue(name);
-+ if (!wq->wq) {
-+ goto no_wq;
-+ }
-+
-+ wq->pending = 0;
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK))
-+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(wq->lock);
-+#else
-+ wq->lock = DWC_SPINLOCK_ALLOC();
-+#endif
-+ if (!wq->lock) {
-+ goto no_lock;
-+ }
-+
-+ wq->waitq = DWC_WAITQ_ALLOC();
-+ if (!wq->waitq) {
-+ goto no_waitq;
-+ }
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_INIT(&wq->entries);
-+#endif
-+ return wq;
-+
-+ no_waitq:
-+ DWC_SPINLOCK_FREE(wq->lock);
-+ no_lock:
-+ destroy_workqueue(wq->wq);
-+ no_wq:
-+ DWC_FREE(wq);
-+
-+ return NULL;
-+}
-+
-+void DWC_WORKQ_FREE(dwc_workq_t *wq)
-+{
-+#ifdef DEBUG
-+ if (wq->pending != 0) {
-+ struct work_container *wc;
-+ DWC_ERROR("Destroying work queue with pending work");
-+ DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) {
-+ DWC_ERROR("Work %s still pending", wc->name);
-+ }
-+ }
-+#endif
-+ destroy_workqueue(wq->wq);
-+ DWC_SPINLOCK_FREE(wq->lock);
-+ DWC_WAITQ_FREE(wq->waitq);
-+ DWC_FREE(wq);
-+}
-+
-+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
-+ char *format, ...)
-+{
-+ dwc_irqflags_t flags;
-+ work_container_t *container;
-+ static char name[128];
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VSNPRINTF(name, 128, format, args);
-+ va_end(args);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending++;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+
-+ container = DWC_ALLOC_ATOMIC(sizeof(*container));
-+ if (!container) {
-+ DWC_ERROR("Cannot allocate memory for container\n");
-+ return;
-+ }
-+
-+ container->name = DWC_STRDUP(name);
-+ if (!container->name) {
-+ DWC_ERROR("Cannot allocate memory for container->name\n");
-+ DWC_FREE(container);
-+ return;
-+ }
-+
-+ container->cb = cb;
-+ container->data = data;
-+ container->wq = wq;
-+ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
-+ INIT_WORK(&container->work.work, do_work);
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
-+#endif
-+ queue_work(wq->wq, &container->work.work);
-+}
-+
-+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
-+ void *data, uint32_t time, char *format, ...)
-+{
-+ dwc_irqflags_t flags;
-+ work_container_t *container;
-+ static char name[128];
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VSNPRINTF(name, 128, format, args);
-+ va_end(args);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending++;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+
-+ container = DWC_ALLOC_ATOMIC(sizeof(*container));
-+ if (!container) {
-+ DWC_ERROR("Cannot allocate memory for container\n");
-+ return;
-+ }
-+
-+ container->name = DWC_STRDUP(name);
-+ if (!container->name) {
-+ DWC_ERROR("Cannot allocate memory for container->name\n");
-+ DWC_FREE(container);
-+ return;
-+ }
-+
-+ container->cb = cb;
-+ container->data = data;
-+ container->wq = wq;
-+ DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
-+ INIT_DELAYED_WORK(&container->work, do_work);
-+
-+#ifdef DEBUG
-+ DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
-+#endif
-+ queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time));
-+}
-+
-+int DWC_WORKQ_PENDING(dwc_workq_t *wq)
-+{
-+ return wq->pending;
-+}
-+
-+
-+#ifdef DWC_LIBMODULE
-+
-+#ifdef DWC_CCLIB
-+/* CC */
-+EXPORT_SYMBOL(dwc_cc_if_alloc);
-+EXPORT_SYMBOL(dwc_cc_if_free);
-+EXPORT_SYMBOL(dwc_cc_clear);
-+EXPORT_SYMBOL(dwc_cc_add);
-+EXPORT_SYMBOL(dwc_cc_remove);
-+EXPORT_SYMBOL(dwc_cc_change);
-+EXPORT_SYMBOL(dwc_cc_data_for_save);
-+EXPORT_SYMBOL(dwc_cc_restore_from_data);
-+EXPORT_SYMBOL(dwc_cc_match_chid);
-+EXPORT_SYMBOL(dwc_cc_match_cdid);
-+EXPORT_SYMBOL(dwc_cc_ck);
-+EXPORT_SYMBOL(dwc_cc_chid);
-+EXPORT_SYMBOL(dwc_cc_cdid);
-+EXPORT_SYMBOL(dwc_cc_name);
-+#endif /* DWC_CCLIB */
-+
-+#ifdef DWC_CRYPTOLIB
-+# ifndef CONFIG_MACH_IPMATE
-+/* Modpow */
-+EXPORT_SYMBOL(dwc_modpow);
-+
-+/* DH */
-+EXPORT_SYMBOL(dwc_dh_modpow);
-+EXPORT_SYMBOL(dwc_dh_derive_keys);
-+EXPORT_SYMBOL(dwc_dh_pk);
-+# endif /* CONFIG_MACH_IPMATE */
-+
-+/* Crypto */
-+EXPORT_SYMBOL(dwc_wusb_aes_encrypt);
-+EXPORT_SYMBOL(dwc_wusb_cmf);
-+EXPORT_SYMBOL(dwc_wusb_prf);
-+EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce);
-+EXPORT_SYMBOL(dwc_wusb_gen_nonce);
-+EXPORT_SYMBOL(dwc_wusb_gen_key);
-+EXPORT_SYMBOL(dwc_wusb_gen_mic);
-+#endif /* DWC_CRYPTOLIB */
-+
-+/* Notification */
-+#ifdef DWC_NOTIFYLIB
-+EXPORT_SYMBOL(dwc_alloc_notification_manager);
-+EXPORT_SYMBOL(dwc_free_notification_manager);
-+EXPORT_SYMBOL(dwc_register_notifier);
-+EXPORT_SYMBOL(dwc_unregister_notifier);
-+EXPORT_SYMBOL(dwc_add_observer);
-+EXPORT_SYMBOL(dwc_remove_observer);
-+EXPORT_SYMBOL(dwc_notify);
-+#endif
-+
-+/* Memory Debugging Routines */
-+#ifdef DWC_DEBUG_MEMORY
-+EXPORT_SYMBOL(dwc_alloc_debug);
-+EXPORT_SYMBOL(dwc_alloc_atomic_debug);
-+EXPORT_SYMBOL(dwc_free_debug);
-+EXPORT_SYMBOL(dwc_dma_alloc_debug);
-+EXPORT_SYMBOL(dwc_dma_free_debug);
-+#endif
-+
-+EXPORT_SYMBOL(DWC_MEMSET);
-+EXPORT_SYMBOL(DWC_MEMCPY);
-+EXPORT_SYMBOL(DWC_MEMMOVE);
-+EXPORT_SYMBOL(DWC_MEMCMP);
-+EXPORT_SYMBOL(DWC_STRNCMP);
-+EXPORT_SYMBOL(DWC_STRCMP);
-+EXPORT_SYMBOL(DWC_STRLEN);
-+EXPORT_SYMBOL(DWC_STRCPY);
-+EXPORT_SYMBOL(DWC_STRDUP);
-+EXPORT_SYMBOL(DWC_ATOI);
-+EXPORT_SYMBOL(DWC_ATOUI);
-+
-+#ifdef DWC_UTFLIB
-+EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE);
-+#endif /* DWC_UTFLIB */
-+
-+EXPORT_SYMBOL(DWC_IN_IRQ);
-+EXPORT_SYMBOL(DWC_IN_BH);
-+EXPORT_SYMBOL(DWC_VPRINTF);
-+EXPORT_SYMBOL(DWC_VSNPRINTF);
-+EXPORT_SYMBOL(DWC_PRINTF);
-+EXPORT_SYMBOL(DWC_SPRINTF);
-+EXPORT_SYMBOL(DWC_SNPRINTF);
-+EXPORT_SYMBOL(__DWC_WARN);
-+EXPORT_SYMBOL(__DWC_ERROR);
-+EXPORT_SYMBOL(DWC_EXCEPTION);
-+
-+#ifdef DEBUG
-+EXPORT_SYMBOL(__DWC_DEBUG);
-+#endif
-+
-+EXPORT_SYMBOL(__DWC_DMA_ALLOC);
-+EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC);
-+EXPORT_SYMBOL(__DWC_DMA_FREE);
-+EXPORT_SYMBOL(__DWC_ALLOC);
-+EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC);
-+EXPORT_SYMBOL(__DWC_FREE);
-+
-+#ifdef DWC_CRYPTOLIB
-+EXPORT_SYMBOL(DWC_RANDOM_BYTES);
-+EXPORT_SYMBOL(DWC_AES_CBC);
-+EXPORT_SYMBOL(DWC_SHA256);
-+EXPORT_SYMBOL(DWC_HMAC_SHA256);
-+#endif
-+
-+EXPORT_SYMBOL(DWC_CPU_TO_LE32);
-+EXPORT_SYMBOL(DWC_CPU_TO_BE32);
-+EXPORT_SYMBOL(DWC_LE32_TO_CPU);
-+EXPORT_SYMBOL(DWC_BE32_TO_CPU);
-+EXPORT_SYMBOL(DWC_CPU_TO_LE16);
-+EXPORT_SYMBOL(DWC_CPU_TO_BE16);
-+EXPORT_SYMBOL(DWC_LE16_TO_CPU);
-+EXPORT_SYMBOL(DWC_BE16_TO_CPU);
-+EXPORT_SYMBOL(DWC_READ_REG32);
-+EXPORT_SYMBOL(DWC_WRITE_REG32);
-+EXPORT_SYMBOL(DWC_MODIFY_REG32);
-+
-+#if 0
-+EXPORT_SYMBOL(DWC_READ_REG64);
-+EXPORT_SYMBOL(DWC_WRITE_REG64);
-+EXPORT_SYMBOL(DWC_MODIFY_REG64);
-+#endif
-+
-+EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC);
-+EXPORT_SYMBOL(DWC_SPINLOCK_FREE);
-+EXPORT_SYMBOL(DWC_SPINLOCK);
-+EXPORT_SYMBOL(DWC_SPINUNLOCK);
-+EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE);
-+EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE);
-+EXPORT_SYMBOL(DWC_MUTEX_ALLOC);
-+
-+#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES))
-+EXPORT_SYMBOL(DWC_MUTEX_FREE);
-+#endif
-+
-+EXPORT_SYMBOL(DWC_MUTEX_LOCK);
-+EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK);
-+EXPORT_SYMBOL(DWC_MUTEX_UNLOCK);
-+EXPORT_SYMBOL(DWC_UDELAY);
-+EXPORT_SYMBOL(DWC_MDELAY);
-+EXPORT_SYMBOL(DWC_MSLEEP);
-+EXPORT_SYMBOL(DWC_TIME);
-+EXPORT_SYMBOL(DWC_TIMER_ALLOC);
-+EXPORT_SYMBOL(DWC_TIMER_FREE);
-+EXPORT_SYMBOL(DWC_TIMER_SCHEDULE);
-+EXPORT_SYMBOL(DWC_TIMER_CANCEL);
-+EXPORT_SYMBOL(DWC_WAITQ_ALLOC);
-+EXPORT_SYMBOL(DWC_WAITQ_FREE);
-+EXPORT_SYMBOL(DWC_WAITQ_WAIT);
-+EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT);
-+EXPORT_SYMBOL(DWC_WAITQ_TRIGGER);
-+EXPORT_SYMBOL(DWC_WAITQ_ABORT);
-+EXPORT_SYMBOL(DWC_THREAD_RUN);
-+EXPORT_SYMBOL(DWC_THREAD_STOP);
-+EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP);
-+EXPORT_SYMBOL(DWC_TASK_ALLOC);
-+EXPORT_SYMBOL(DWC_TASK_FREE);
-+EXPORT_SYMBOL(DWC_TASK_SCHEDULE);
-+EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE);
-+EXPORT_SYMBOL(DWC_WORKQ_ALLOC);
-+EXPORT_SYMBOL(DWC_WORKQ_FREE);
-+EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE);
-+EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED);
-+EXPORT_SYMBOL(DWC_WORKQ_PENDING);
-+
-+static int dwc_common_port_init_module(void)
-+{
-+ int result = 0;
-+
-+ printk(KERN_DEBUG "Module dwc_common_port init\n" );
-+
-+#ifdef DWC_DEBUG_MEMORY
-+ result = dwc_memory_debug_start(NULL);
-+ if (result) {
-+ printk(KERN_ERR
-+ "dwc_memory_debug_start() failed with error %d\n",
-+ result);
-+ return result;
-+ }
-+#endif
-+
-+#ifdef DWC_NOTIFYLIB
-+ result = dwc_alloc_notification_manager(NULL, NULL);
-+ if (result) {
-+ printk(KERN_ERR
-+ "dwc_alloc_notification_manager() failed with error %d\n",
-+ result);
-+ return result;
-+ }
-+#endif
-+ return result;
-+}
-+
-+static void dwc_common_port_exit_module(void)
-+{
-+ printk(KERN_DEBUG "Module dwc_common_port exit\n" );
-+
-+#ifdef DWC_NOTIFYLIB
-+ dwc_free_notification_manager();
-+#endif
-+
-+#ifdef DWC_DEBUG_MEMORY
-+ dwc_memory_debug_stop();
-+#endif
-+}
-+
-+module_init(dwc_common_port_init_module);
-+module_exit(dwc_common_port_exit_module);
-+
-+MODULE_DESCRIPTION("DWC Common Library - Portable version");
-+MODULE_AUTHOR("Synopsys Inc.");
-+MODULE_LICENSE ("GPL");
-+
-+#endif /* DWC_LIBMODULE */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
-@@ -0,0 +1,1275 @@
-+#include "dwc_os.h"
-+#include "dwc_list.h"
-+
-+#ifdef DWC_CCLIB
-+# include "dwc_cc.h"
-+#endif
-+
-+#ifdef DWC_CRYPTOLIB
-+# include "dwc_modpow.h"
-+# include "dwc_dh.h"
-+# include "dwc_crypto.h"
-+#endif
-+
-+#ifdef DWC_NOTIFYLIB
-+# include "dwc_notifier.h"
-+#endif
-+
-+/* OS-Level Implementations */
-+
-+/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */
-+
-+
-+/* MISC */
-+
-+void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
-+{
-+ return memset(dest, byte, size);
-+}
-+
-+void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
-+{
-+ return memcpy(dest, src, size);
-+}
-+
-+void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
-+{
-+ bcopy(src, dest, size);
-+ return dest;
-+}
-+
-+int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
-+{
-+ return memcmp(m1, m2, size);
-+}
-+
-+int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
-+{
-+ return strncmp(s1, s2, size);
-+}
-+
-+int DWC_STRCMP(void *s1, void *s2)
-+{
-+ return strcmp(s1, s2);
-+}
-+
-+int DWC_STRLEN(char const *str)
-+{
-+ return strlen(str);
-+}
-+
-+char *DWC_STRCPY(char *to, char const *from)
-+{
-+ return strcpy(to, from);
-+}
-+
-+char *DWC_STRDUP(char const *str)
-+{
-+ int len = DWC_STRLEN(str) + 1;
-+ char *new = DWC_ALLOC_ATOMIC(len);
-+
-+ if (!new) {
-+ return NULL;
-+ }
-+
-+ DWC_MEMCPY(new, str, len);
-+ return new;
-+}
-+
-+int DWC_ATOI(char *str, int32_t *value)
-+{
-+ char *end = NULL;
-+
-+ /* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul'
-+ * should be equivalent on 2's complement machines
-+ */
-+ *value = strtoul(str, &end, 0);
-+ if (*end == '\0') {
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+int DWC_ATOUI(char *str, uint32_t *value)
-+{
-+ char *end = NULL;
-+
-+ *value = strtoul(str, &end, 0);
-+ if (*end == '\0') {
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+
-+#ifdef DWC_UTFLIB
-+/* From usbstring.c */
-+
-+int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
-+{
-+ int count = 0;
-+ u8 c;
-+ u16 uchar;
-+
-+ /* this insists on correct encodings, though not minimal ones.
-+ * BUT it currently rejects legit 4-byte UTF-8 code points,
-+ * which need surrogate pairs. (Unicode 3.1 can use them.)
-+ */
-+ while (len != 0 && (c = (u8) *s++) != 0) {
-+ if (unlikely(c & 0x80)) {
-+ // 2-byte sequence:
-+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-+ if ((c & 0xe0) == 0xc0) {
-+ uchar = (c & 0x1f) << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ // 3-byte sequence (most CJKV characters):
-+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-+ } else if ((c & 0xf0) == 0xe0) {
-+ uchar = (c & 0x0f) << 12;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ /* no bogus surrogates */
-+ if (0xd800 <= uchar && uchar <= 0xdfff)
-+ goto fail;
-+
-+ // 4-byte sequence (surrogate pairs, currently rare):
-+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-+ // (uuuuu = wwww + 1)
-+ // FIXME accept the surrogate code points (only)
-+ } else
-+ goto fail;
-+ } else
-+ uchar = c;
-+ put_unaligned (cpu_to_le16 (uchar), cp++);
-+ count++;
-+ len--;
-+ }
-+ return count;
-+fail:
-+ return -1;
-+}
-+
-+#endif /* DWC_UTFLIB */
-+
-+
-+/* dwc_debug.h */
-+
-+dwc_bool_t DWC_IN_IRQ(void)
-+{
-+// return in_irq();
-+ return 0;
-+}
-+
-+dwc_bool_t DWC_IN_BH(void)
-+{
-+// return in_softirq();
-+ return 0;
-+}
-+
-+void DWC_VPRINTF(char *format, va_list args)
-+{
-+ vprintf(format, args);
-+}
-+
-+int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
-+{
-+ return vsnprintf(str, size, format, args);
-+}
-+
-+void DWC_PRINTF(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+int DWC_SPRINTF(char *buffer, char *format, ...)
-+{
-+ int retval;
-+ va_list args;
-+
-+ va_start(args, format);
-+ retval = vsprintf(buffer, format, args);
-+ va_end(args);
-+ return retval;
-+}
-+
-+int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
-+{
-+ int retval;
-+ va_list args;
-+
-+ va_start(args, format);
-+ retval = vsnprintf(buffer, size, format, args);
-+ va_end(args);
-+ return retval;
-+}
-+
-+void __DWC_WARN(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+void __DWC_ERROR(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+
-+void DWC_EXCEPTION(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+// BUG_ON(1); ???
-+}
-+
-+#ifdef DEBUG
-+void __DWC_DEBUG(char *format, ...)
-+{
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VPRINTF(format, args);
-+ va_end(args);
-+}
-+#endif
-+
-+
-+/* dwc_mem.h */
-+
-+#if 0
-+dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
-+ uint32_t align,
-+ uint32_t alloc)
-+{
-+ struct dma_pool *pool = dma_pool_create("Pool", NULL,
-+ size, align, alloc);
-+ return (dwc_pool_t *)pool;
-+}
-+
-+void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
-+{
-+ dma_pool_destroy((struct dma_pool *)pool);
-+}
-+
-+void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
-+{
-+// return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
-+ return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
-+}
-+
-+void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
-+{
-+ void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
-+ memset(..);
-+}
-+
-+void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
-+{
-+ dma_pool_free(pool, vaddr, daddr);
-+}
-+#endif
-+
-+void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
-+{
-+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
-+ int error;
-+
-+ error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs,
-+ sizeof(dma->segs) / sizeof(dma->segs[0]),
-+ &dma->nsegs, BUS_DMA_NOWAIT);
-+ if (error) {
-+ printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__,
-+ (uintmax_t)size, error);
-+ goto fail_0;
-+ }
-+
-+ error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size,
-+ (caddr_t *)&dma->dma_vaddr,
-+ BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
-+ if (error) {
-+ printf("%s: bus_dmamem_map failed: %d\n", __func__, error);
-+ goto fail_1;
-+ }
-+
-+ error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0,
-+ BUS_DMA_NOWAIT, &dma->dma_map);
-+ if (error) {
-+ printf("%s: bus_dmamap_create failed: %d\n", __func__, error);
-+ goto fail_2;
-+ }
-+
-+ error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
-+ size, NULL, BUS_DMA_NOWAIT);
-+ if (error) {
-+ printf("%s: bus_dmamap_load failed: %d\n", __func__, error);
-+ goto fail_3;
-+ }
-+
-+ dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr;
-+ *dma_addr = dma->dma_paddr;
-+ return dma->dma_vaddr;
-+
-+fail_3:
-+ bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
-+fail_2:
-+ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
-+fail_1:
-+ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
-+fail_0:
-+ dma->dma_map = NULL;
-+ dma->dma_vaddr = NULL;
-+ dma->nsegs = 0;
-+
-+ return NULL;
-+}
-+
-+void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
-+{
-+ dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
-+
-+ if (dma->dma_map != NULL) {
-+ bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size,
-+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
-+ bus_dmamap_unload(dma->dma_tag, dma->dma_map);
-+ bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
-+ bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
-+ bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
-+ dma->dma_paddr = 0;
-+ dma->dma_map = NULL;
-+ dma->dma_vaddr = NULL;
-+ dma->nsegs = 0;
-+ }
-+}
-+
-+void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
-+{
-+ return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
-+}
-+
-+void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
-+{
-+ return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
-+}
-+
-+void __DWC_FREE(void *mem_ctx, void *addr)
-+{
-+ free(addr, M_DEVBUF);
-+}
-+
-+
-+#ifdef DWC_CRYPTOLIB
-+/* dwc_crypto.h */
-+
-+void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
-+{
-+ get_random_bytes(buffer, length);
-+}
-+
-+int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
-+{
-+ struct crypto_blkcipher *tfm;
-+ struct blkcipher_desc desc;
-+ struct scatterlist sgd;
-+ struct scatterlist sgs;
-+
-+ tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
-+ if (tfm == NULL) {
-+ printk("failed to load transform for aes CBC\n");
-+ return -1;
-+ }
-+
-+ crypto_blkcipher_setkey(tfm, key, keylen);
-+ crypto_blkcipher_set_iv(tfm, iv, 16);
-+
-+ sg_init_one(&sgd, out, messagelen);
-+ sg_init_one(&sgs, message, messagelen);
-+
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
-+ crypto_free_blkcipher(tfm);
-+ DWC_ERROR("AES CBC encryption failed");
-+ return -1;
-+ }
-+
-+ crypto_free_blkcipher(tfm);
-+ return 0;
-+}
-+
-+int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
-+{
-+ struct crypto_hash *tfm;
-+ struct hash_desc desc;
-+ struct scatterlist sg;
-+
-+ tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
-+ if (IS_ERR(tfm)) {
-+ DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
-+ return 0;
-+ }
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ sg_init_one(&sg, message, len);
-+ crypto_hash_digest(&desc, &sg, len, out);
-+ crypto_free_hash(tfm);
-+
-+ return 1;
-+}
-+
-+int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
-+ uint8_t *key, uint32_t keylen, uint8_t *out)
-+{
-+ struct crypto_hash *tfm;
-+ struct hash_desc desc;
-+ struct scatterlist sg;
-+
-+ tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
-+ if (IS_ERR(tfm)) {
-+ DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
-+ return 0;
-+ }
-+ desc.tfm = tfm;
-+ desc.flags = 0;
-+
-+ sg_init_one(&sg, message, messagelen);
-+ crypto_hash_setkey(tfm, key, keylen);
-+ crypto_hash_digest(&desc, &sg, messagelen, out);
-+ crypto_free_hash(tfm);
-+
-+ return 1;
-+}
-+
-+#endif /* DWC_CRYPTOLIB */
-+
-+
-+/* Byte Ordering Conversions */
-+
-+uint32_t DWC_CPU_TO_LE32(uint32_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_CPU_TO_BE32(uint32_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_LE32_TO_CPU(uint32_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint32_t DWC_BE32_TO_CPU(uint32_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+
-+ return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
-+#endif
-+}
-+
-+uint16_t DWC_CPU_TO_LE16(uint16_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_CPU_TO_BE16(uint16_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_LE16_TO_CPU(uint16_t *p)
-+{
-+#ifdef __LITTLE_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+uint16_t DWC_BE16_TO_CPU(uint16_t *p)
-+{
-+#ifdef __BIG_ENDIAN
-+ return *p;
-+#else
-+ uint8_t *u_p = (uint8_t *)p;
-+ return (u_p[1] | (u_p[0] << 8));
-+#endif
-+}
-+
-+
-+/* Registers */
-+
-+uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ return bus_space_read_4(io->iot, io->ioh, ior);
-+}
-+
-+#if 0
-+uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ return bus_space_read_8(io->iot, io->ioh, ior);
-+}
-+#endif
-+
-+void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_4(io->iot, io->ioh, ior, value);
-+}
-+
-+#if 0
-+void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_8(io->iot, io->ioh, ior, value);
-+}
-+#endif
-+
-+void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
-+ uint32_t set_mask)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_4(io->iot, io->ioh, ior,
-+ (bus_space_read_4(io->iot, io->ioh, ior) &
-+ ~clear_mask) | set_mask);
-+}
-+
-+#if 0
-+void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
-+ uint64_t set_mask)
-+{
-+ dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
-+ bus_size_t ior = (bus_size_t)reg;
-+
-+ bus_space_write_8(io->iot, io->ioh, ior,
-+ (bus_space_read_8(io->iot, io->ioh, ior) &
-+ ~clear_mask) | set_mask);
-+}
-+#endif
-+
-+
-+/* Locking */
-+
-+dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
-+{
-+ struct simplelock *sl = DWC_ALLOC(sizeof(*sl));
-+
-+ if (!sl) {
-+ DWC_ERROR("Cannot allocate memory for spinlock");
-+ return NULL;
-+ }
-+
-+ simple_lock_init(sl);
-+ return (dwc_spinlock_t *)sl;
-+}
-+
-+void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
-+{
-+ struct simplelock *sl = (struct simplelock *)lock;
-+
-+ DWC_FREE(sl);
-+}
-+
-+void DWC_SPINLOCK(dwc_spinlock_t *lock)
-+{
-+ simple_lock((struct simplelock *)lock);
-+}
-+
-+void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
-+{
-+ simple_unlock((struct simplelock *)lock);
-+}
-+
-+void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
-+{
-+ simple_lock((struct simplelock *)lock);
-+ *flags = splbio();
-+}
-+
-+void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
-+{
-+ splx(flags);
-+ simple_unlock((struct simplelock *)lock);
-+}
-+
-+dwc_mutex_t *DWC_MUTEX_ALLOC(void)
-+{
-+ dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock));
-+
-+ if (!mutex) {
-+ DWC_ERROR("Cannot allocate memory for mutex");
-+ return NULL;
-+ }
-+
-+ lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0);
-+ return mutex;
-+}
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
-+#else
-+void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
-+{
-+ DWC_FREE(mutex);
-+}
-+#endif
-+
-+void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
-+{
-+ lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL);
-+}
-+
-+int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
-+{
-+ int status;
-+
-+ status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL);
-+ return status == 0;
-+}
-+
-+void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
-+{
-+ lockmgr((struct lock *)mutex, LK_RELEASE, NULL);
-+}
-+
-+
-+/* Timing */
-+
-+void DWC_UDELAY(uint32_t usecs)
-+{
-+ DELAY(usecs);
-+}
-+
-+void DWC_MDELAY(uint32_t msecs)
-+{
-+ do {
-+ DELAY(1000);
-+ } while (--msecs);
-+}
-+
-+void DWC_MSLEEP(uint32_t msecs)
-+{
-+ struct timeval tv;
-+
-+ tv.tv_sec = msecs / 1000;
-+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
-+ tsleep(&tv, 0, "dw3slp", tvtohz(&tv));
-+}
-+
-+uint32_t DWC_TIME(void)
-+{
-+ struct timeval tv;
-+
-+ microuptime(&tv); // or getmicrouptime? (less precise, but faster)
-+ return tv.tv_sec * 1000 + tv.tv_usec / 1000;
-+}
-+
-+
-+/* Timers */
-+
-+struct dwc_timer {
-+ struct callout t;
-+ char *name;
-+ dwc_spinlock_t *lock;
-+ dwc_timer_callback_t cb;
-+ void *data;
-+};
-+
-+dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
-+{
-+ dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
-+
-+ if (!t) {
-+ DWC_ERROR("Cannot allocate memory for timer");
-+ return NULL;
-+ }
-+
-+ callout_init(&t->t);
-+
-+ t->name = DWC_STRDUP(name);
-+ if (!t->name) {
-+ DWC_ERROR("Cannot allocate memory for timer->name");
-+ goto no_name;
-+ }
-+
-+ t->lock = DWC_SPINLOCK_ALLOC();
-+ if (!t->lock) {
-+ DWC_ERROR("Cannot allocate memory for timer->lock");
-+ goto no_lock;
-+ }
-+
-+ t->cb = cb;
-+ t->data = data;
-+
-+ return t;
-+
-+ no_lock:
-+ DWC_FREE(t->name);
-+ no_name:
-+ DWC_FREE(t);
-+
-+ return NULL;
-+}
-+
-+void DWC_TIMER_FREE(dwc_timer_t *timer)
-+{
-+ callout_stop(&timer->t);
-+ DWC_SPINLOCK_FREE(timer->lock);
-+ DWC_FREE(timer->name);
-+ DWC_FREE(timer);
-+}
-+
-+void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
-+{
-+ struct timeval tv;
-+
-+ tv.tv_sec = time / 1000;
-+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
-+ callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
-+}
-+
-+void DWC_TIMER_CANCEL(dwc_timer_t *timer)
-+{
-+ callout_stop(&timer->t);
-+}
-+
-+
-+/* Wait Queues */
-+
-+struct dwc_waitq {
-+ struct simplelock lock;
-+ int abort;
-+};
-+
-+dwc_waitq_t *DWC_WAITQ_ALLOC(void)
-+{
-+ dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
-+
-+ if (!wq) {
-+ DWC_ERROR("Cannot allocate memory for waitqueue");
-+ return NULL;
-+ }
-+
-+ simple_lock_init(&wq->lock);
-+ wq->abort = 0;
-+
-+ return wq;
-+}
-+
-+void DWC_WAITQ_FREE(dwc_waitq_t *wq)
-+{
-+ DWC_FREE(wq);
-+}
-+
-+int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
-+{
-+ int ipl;
-+ int result = 0;
-+
-+ simple_lock(&wq->lock);
-+ ipl = splbio();
-+
-+ /* Skip the sleep if already aborted or triggered */
-+ if (!wq->abort && !cond(data)) {
-+ splx(ipl);
-+ result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout
-+ ipl = splbio();
-+ }
-+
-+ if (result == 0) { // awoken
-+ if (wq->abort) {
-+ wq->abort = 0;
-+ result = -DWC_E_ABORT;
-+ } else {
-+ result = 0;
-+ }
-+
-+ splx(ipl);
-+ simple_unlock(&wq->lock);
-+ } else {
-+ wq->abort = 0;
-+ splx(ipl);
-+ simple_unlock(&wq->lock);
-+
-+ if (result == ERESTART) { // signaled - restart
-+ result = -DWC_E_RESTART;
-+ } else { // signaled - must be EINTR
-+ result = -DWC_E_ABORT;
-+ }
-+ }
-+
-+ return result;
-+}
-+
-+int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
-+ void *data, int32_t msecs)
-+{
-+ struct timeval tv, tv1, tv2;
-+ int ipl;
-+ int result = 0;
-+
-+ tv.tv_sec = msecs / 1000;
-+ tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
-+
-+ simple_lock(&wq->lock);
-+ ipl = splbio();
-+
-+ /* Skip the sleep if already aborted or triggered */
-+ if (!wq->abort && !cond(data)) {
-+ splx(ipl);
-+ getmicrouptime(&tv1);
-+ result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock);
-+ getmicrouptime(&tv2);
-+ ipl = splbio();
-+ }
-+
-+ if (result == 0) { // awoken
-+ if (wq->abort) {
-+ wq->abort = 0;
-+ splx(ipl);
-+ simple_unlock(&wq->lock);
-+ result = -DWC_E_ABORT;
-+ } else {
-+ splx(ipl);
-+ simple_unlock(&wq->lock);
-+
-+ tv2.tv_usec -= tv1.tv_usec;
-+ if (tv2.tv_usec < 0) {
-+ tv2.tv_usec += 1000000;
-+ tv2.tv_sec--;
-+ }
-+
-+ tv2.tv_sec -= tv1.tv_sec;
-+ result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
-+ result = msecs - result;
-+ if (result <= 0)
-+ result = 1;
-+ }
-+ } else {
-+ wq->abort = 0;
-+ splx(ipl);
-+ simple_unlock(&wq->lock);
-+
-+ if (result == ERESTART) { // signaled - restart
-+ result = -DWC_E_RESTART;
-+
-+ } else if (result == EINTR) { // signaled - interrupt
-+ result = -DWC_E_ABORT;
-+
-+ } else { // timed out
-+ result = -DWC_E_TIMEOUT;
-+ }
-+ }
-+
-+ return result;
-+}
-+
-+void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
-+{
-+ wakeup(wq);
-+}
-+
-+void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
-+{
-+ int ipl;
-+
-+ simple_lock(&wq->lock);
-+ ipl = splbio();
-+ wq->abort = 1;
-+ wakeup(wq);
-+ splx(ipl);
-+ simple_unlock(&wq->lock);
-+}
-+
-+
-+/* Threading */
-+
-+struct dwc_thread {
-+ struct proc *proc;
-+ int abort;
-+};
-+
-+dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
-+{
-+ int retval;
-+ dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
-+
-+ if (!thread) {
-+ return NULL;
-+ }
-+
-+ thread->abort = 0;
-+ retval = kthread_create1((void (*)(void *))func, data, &thread->proc,
-+ "%s", name);
-+ if (retval) {
-+ DWC_FREE(thread);
-+ return NULL;
-+ }
-+
-+ return thread;
-+}
-+
-+int DWC_THREAD_STOP(dwc_thread_t *thread)
-+{
-+ int retval;
-+
-+ thread->abort = 1;
-+ retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
-+
-+ if (retval == 0) {
-+ /* DWC_THREAD_EXIT() will free the thread struct */
-+ return 0;
-+ }
-+
-+ /* NOTE: We leak the thread struct if thread doesn't die */
-+
-+ if (retval == EWOULDBLOCK) {
-+ return -DWC_E_TIMEOUT;
-+ }
-+
-+ return -DWC_E_UNKNOWN;
-+}
-+
-+dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
-+{
-+ return thread->abort;
-+}
-+
-+void DWC_THREAD_EXIT(dwc_thread_t *thread)
-+{
-+ wakeup(&thread->abort);
-+ DWC_FREE(thread);
-+ kthread_exit(0);
-+}
-+
-+/* tasklets
-+ - Runs in interrupt context (cannot sleep)
-+ - Each tasklet runs on a single CPU
-+ - Different tasklets can be running simultaneously on different CPUs
-+ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom-
-+ halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ]
-+ */
-+struct dwc_tasklet {
-+ dwc_tasklet_callback_t cb;
-+ void *data;
-+};
-+
-+static void tasklet_callback(void *data)
-+{
-+ dwc_tasklet_t *task = (dwc_tasklet_t *)data;
-+
-+ task->cb(task->data);
-+}
-+
-+dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
-+{
-+ dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
-+
-+ if (task) {
-+ task->cb = cb;
-+ task->data = data;
-+ } else {
-+ DWC_ERROR("Cannot allocate memory for tasklet");
-+ }
-+
-+ return task;
-+}
-+
-+void DWC_TASK_FREE(dwc_tasklet_t *task)
-+{
-+ DWC_FREE(task);
-+}
-+
-+void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
-+{
-+ tasklet_callback(task);
-+}
-+
-+
-+/* workqueues
-+ - Runs in process context (can sleep)
-+ */
-+typedef struct work_container {
-+ dwc_work_callback_t cb;
-+ void *data;
-+ dwc_workq_t *wq;
-+ char *name;
-+ int hz;
-+ struct work task;
-+} work_container_t;
-+
-+struct dwc_workq {
-+ struct workqueue *taskq;
-+ dwc_spinlock_t *lock;
-+ dwc_waitq_t *waitq;
-+ int pending;
-+ struct work_container *container;
-+};
-+
-+static void do_work(struct work *task, void *data)
-+{
-+ dwc_workq_t *wq = (dwc_workq_t *)data;
-+ work_container_t *container = wq->container;
-+ dwc_irqflags_t flags;
-+
-+ if (container->hz) {
-+ tsleep(container, 0, "dw3wrk", container->hz);
-+ }
-+
-+ container->cb(container->data);
-+ DWC_DEBUG("Work done: %s, container=%p", container->name, container);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ if (container->name)
-+ DWC_FREE(container->name);
-+ DWC_FREE(container);
-+ wq->pending--;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+}
-+
-+static int work_done(void *data)
-+{
-+ dwc_workq_t *workq = (dwc_workq_t *)data;
-+
-+ return workq->pending == 0;
-+}
-+
-+int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
-+{
-+ return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
-+}
-+
-+dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
-+{
-+ int result;
-+ dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
-+
-+ if (!wq) {
-+ DWC_ERROR("Cannot allocate memory for workqueue");
-+ return NULL;
-+ }
-+
-+ result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/,
-+ IPL_BIO, 0);
-+ if (result) {
-+ DWC_ERROR("Cannot create workqueue");
-+ goto no_taskq;
-+ }
-+
-+ wq->pending = 0;
-+
-+ wq->lock = DWC_SPINLOCK_ALLOC();
-+ if (!wq->lock) {
-+ DWC_ERROR("Cannot allocate memory for spinlock");
-+ goto no_lock;
-+ }
-+
-+ wq->waitq = DWC_WAITQ_ALLOC();
-+ if (!wq->waitq) {
-+ DWC_ERROR("Cannot allocate memory for waitqueue");
-+ goto no_waitq;
-+ }
-+
-+ return wq;
-+
-+ no_waitq:
-+ DWC_SPINLOCK_FREE(wq->lock);
-+ no_lock:
-+ workqueue_destroy(wq->taskq);
-+ no_taskq:
-+ DWC_FREE(wq);
-+
-+ return NULL;
-+}
-+
-+void DWC_WORKQ_FREE(dwc_workq_t *wq)
-+{
-+#ifdef DEBUG
-+ dwc_irqflags_t flags;
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+
-+ if (wq->pending != 0) {
-+ struct work_container *container = wq->container;
-+
-+ DWC_ERROR("Destroying work queue with pending work");
-+
-+ if (container && container->name) {
-+ DWC_ERROR("Work %s still pending", container->name);
-+ }
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+#endif
-+ DWC_WAITQ_FREE(wq->waitq);
-+ DWC_SPINLOCK_FREE(wq->lock);
-+ workqueue_destroy(wq->taskq);
-+ DWC_FREE(wq);
-+}
-+
-+void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
-+ char *format, ...)
-+{
-+ dwc_irqflags_t flags;
-+ work_container_t *container;
-+ static char name[128];
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VSNPRINTF(name, 128, format, args);
-+ va_end(args);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending++;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+
-+ container = DWC_ALLOC_ATOMIC(sizeof(*container));
-+ if (!container) {
-+ DWC_ERROR("Cannot allocate memory for container");
-+ return;
-+ }
-+
-+ container->name = DWC_STRDUP(name);
-+ if (!container->name) {
-+ DWC_ERROR("Cannot allocate memory for container->name");
-+ DWC_FREE(container);
-+ return;
-+ }
-+
-+ container->cb = cb;
-+ container->data = data;
-+ container->wq = wq;
-+ container->hz = 0;
-+ wq->container = container;
-+
-+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
-+ workqueue_enqueue(wq->taskq, &container->task);
-+}
-+
-+void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
-+ void *data, uint32_t time, char *format, ...)
-+{
-+ dwc_irqflags_t flags;
-+ work_container_t *container;
-+ static char name[128];
-+ struct timeval tv;
-+ va_list args;
-+
-+ va_start(args, format);
-+ DWC_VSNPRINTF(name, 128, format, args);
-+ va_end(args);
-+
-+ DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
-+ wq->pending++;
-+ DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
-+ DWC_WAITQ_TRIGGER(wq->waitq);
-+
-+ container = DWC_ALLOC_ATOMIC(sizeof(*container));
-+ if (!container) {
-+ DWC_ERROR("Cannot allocate memory for container");
-+ return;
-+ }
-+
-+ container->name = DWC_STRDUP(name);
-+ if (!container->name) {
-+ DWC_ERROR("Cannot allocate memory for container->name");
-+ DWC_FREE(container);
-+ return;
-+ }
-+
-+ container->cb = cb;
-+ container->data = data;
-+ container->wq = wq;
-+ tv.tv_sec = time / 1000;
-+ tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
-+ container->hz = tvtohz(&tv);
-+ wq->container = container;
-+
-+ DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
-+ workqueue_enqueue(wq->taskq, &container->task);
-+}
-+
-+int DWC_WORKQ_PENDING(dwc_workq_t *wq)
-+{
-+ return wq->pending;
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c
-@@ -0,0 +1,308 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $
-+ * $Revision: #5 $
-+ * $Date: 2010/09/28 $
-+ * $Change: 1596182 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+
-+/** @file
-+ * This file contains the WUSB cryptographic routines.
-+ */
-+
-+#ifdef DWC_CRYPTOLIB
-+
-+#include "dwc_crypto.h"
-+#include "usb.h"
-+
-+#ifdef DEBUG
-+static inline void dump_bytes(char *name, uint8_t *bytes, int len)
-+{
-+ int i;
-+ DWC_PRINTF("%s: ", name);
-+ for (i=0; i<len; i++) {
-+ DWC_PRINTF("%02x ", bytes[i]);
-+ }
-+ DWC_PRINTF("\n");
-+}
-+#else
-+#define dump_bytes(x...)
-+#endif
-+
-+/* Display a block */
-+void show_block(const u8 *blk, const char *prefix, const char *suffix, int a)
-+{
-+#ifdef DWC_DEBUG_CRYPTO
-+ int i, blksize = 16;
-+
-+ DWC_DEBUG("%s", prefix);
-+
-+ if (suffix == NULL) {
-+ suffix = "\n";
-+ blksize = a;
-+ }
-+
-+ for (i = 0; i < blksize; i++)
-+ DWC_PRINT("%02x%s", *blk++, ((i & 3) == 3) ? " " : " ");
-+ DWC_PRINT(suffix);
-+#endif
-+}
-+
-+/**
-+ * Encrypts an array of bytes using the AES encryption engine.
-+ * If <code>dst</code> == <code>src</code>, then the bytes will be encrypted
-+ * in-place.
-+ *
-+ * @return 0 on success, negative error code on error.
-+ */
-+int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst)
-+{
-+ u8 block_t[16];
-+ DWC_MEMSET(block_t, 0, 16);
-+
-+ return DWC_AES_CBC(src, 16, key, 16, block_t, dst);
-+}
-+
-+/**
-+ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec.
-+ * This function takes a data string and returns the encrypted CBC
-+ * Counter-mode MIC.
-+ *
-+ * @param key The 128-bit symmetric key.
-+ * @param nonce The CCM nonce.
-+ * @param label The unique 14-byte ASCII text label.
-+ * @param bytes The byte array to be encrypted.
-+ * @param len Length of the byte array.
-+ * @param result Byte array to receive the 8-byte encrypted MIC.
-+ */
-+void dwc_wusb_cmf(u8 *key, u8 *nonce,
-+ char *label, u8 *bytes, int len, u8 *result)
-+{
-+ u8 block_m[16];
-+ u8 block_x[16];
-+ u8 block_t[8];
-+ int idx, blkNum;
-+ u16 la = (u16)(len + 14);
-+
-+ /* Set the AES-128 key */
-+ //dwc_aes_setkey(tfm, key, 16);
-+
-+ /* Fill block B0 from flags = 0x59, N, and l(m) = 0 */
-+ block_m[0] = 0x59;
-+ for (idx = 0; idx < 13; idx++)
-+ block_m[idx + 1] = nonce[idx];
-+ block_m[14] = 0;
-+ block_m[15] = 0;
-+
-+ /* Produce the CBC IV */
-+ dwc_wusb_aes_encrypt(block_m, key, block_x);
-+ show_block(block_m, "CBC IV in: ", "\n", 0);
-+ show_block(block_x, "CBC IV out:", "\n", 0);
-+
-+ /* Fill block B1 from l(a) = Blen + 14, and A */
-+ block_x[0] ^= (u8)(la >> 8);
-+ block_x[1] ^= (u8)la;
-+ for (idx = 0; idx < 14; idx++)
-+ block_x[idx + 2] ^= label[idx];
-+ show_block(block_x, "After xor: ", "b1\n", 16);
-+
-+ dwc_wusb_aes_encrypt(block_x, key, block_x);
-+ show_block(block_x, "After AES: ", "b1\n", 16);
-+
-+ idx = 0;
-+ blkNum = 0;
-+
-+ /* Fill remaining blocks with B */
-+ while (len-- > 0) {
-+ block_x[idx] ^= *bytes++;
-+ if (++idx >= 16) {
-+ idx = 0;
-+ show_block(block_x, "After xor: ", "\n", blkNum);
-+ dwc_wusb_aes_encrypt(block_x, key, block_x);
-+ show_block(block_x, "After AES: ", "\n", blkNum);
-+ blkNum++;
-+ }
-+ }
-+
-+ /* Handle partial last block */
-+ if (idx > 0) {
-+ show_block(block_x, "After xor: ", "\n", blkNum);
-+ dwc_wusb_aes_encrypt(block_x, key, block_x);
-+ show_block(block_x, "After AES: ", "\n", blkNum);
-+ }
-+
-+ /* Save the MIC tag */
-+ DWC_MEMCPY(block_t, block_x, 8);
-+ show_block(block_t, "MIC tag : ", NULL, 8);
-+
-+ /* Fill block A0 from flags = 0x01, N, and counter = 0 */
-+ block_m[0] = 0x01;
-+ block_m[14] = 0;
-+ block_m[15] = 0;
-+
-+ /* Encrypt the counter */
-+ dwc_wusb_aes_encrypt(block_m, key, block_x);
-+ show_block(block_x, "CTR[MIC] : ", NULL, 8);
-+
-+ /* XOR with MIC tag */
-+ for (idx = 0; idx < 8; idx++) {
-+ block_t[idx] ^= block_x[idx];
-+ }
-+
-+ /* Return result to caller */
-+ DWC_MEMCPY(result, block_t, 8);
-+ show_block(result, "CCM-MIC : ", NULL, 8);
-+
-+}
-+
-+/**
-+ * The PRF function described in section 6.5 of the WUSB spec. This function
-+ * concatenates MIC values returned from dwc_cmf() to create a value of
-+ * the requested length.
-+ *
-+ * @param prf_len Length of the PRF function in bits (64, 128, or 256).
-+ * @param key, nonce, label, bytes, len Same as for dwc_cmf().
-+ * @param result Byte array to receive the result.
-+ */
-+void dwc_wusb_prf(int prf_len, u8 *key,
-+ u8 *nonce, char *label, u8 *bytes, int len, u8 *result)
-+{
-+ int i;
-+
-+ nonce[0] = 0;
-+ for (i = 0; i < prf_len >> 6; i++, nonce[0]++) {
-+ dwc_wusb_cmf(key, nonce, label, bytes, len, result);
-+ result += 8;
-+ }
-+}
-+
-+/**
-+ * Fills in CCM Nonce per the WUSB spec.
-+ *
-+ * @param[in] haddr Host address.
-+ * @param[in] daddr Device address.
-+ * @param[in] tkid Session Key(PTK) identifier.
-+ * @param[out] nonce Pointer to where the CCM Nonce output is to be written.
-+ */
-+void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
-+ uint8_t *nonce)
-+{
-+
-+ DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr);
-+
-+ DWC_MEMSET(&nonce[0], 0, 16);
-+
-+ DWC_MEMCPY(&nonce[6], tkid, 3);
-+ nonce[9] = daddr & 0xFF;
-+ nonce[10] = (daddr >> 8) & 0xFF;
-+ nonce[11] = haddr & 0xFF;
-+ nonce[12] = (haddr >> 8) & 0xFF;
-+
-+ dump_bytes("CCM nonce", nonce, 16);
-+}
-+
-+/**
-+ * Generates a 16-byte cryptographic-grade random number for the Host/Device
-+ * Nonce.
-+ */
-+void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce)
-+{
-+ uint8_t inonce[16];
-+ uint32_t temp[4];
-+
-+ /* Fill in the Nonce */
-+ DWC_MEMSET(&inonce[0], 0, sizeof(inonce));
-+ inonce[9] = addr & 0xFF;
-+ inonce[10] = (addr >> 8) & 0xFF;
-+ inonce[11] = inonce[9];
-+ inonce[12] = inonce[10];
-+
-+ /* Collect "randomness samples" */
-+ DWC_RANDOM_BYTES((uint8_t *)temp, 16);
-+
-+ dwc_wusb_prf_128((uint8_t *)temp, nonce,
-+ "Random Numbers", (uint8_t *)temp, sizeof(temp),
-+ nonce);
-+}
-+
-+/**
-+ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the
-+ * WUSB spec.
-+ *
-+ * @param[in] ccm_nonce Pointer to CCM Nonce.
-+ * @param[in] mk Master Key to derive the session from
-+ * @param[in] hnonce Pointer to Host Nonce.
-+ * @param[in] dnonce Pointer to Device Nonce.
-+ * @param[out] kck Pointer to where the KCK output is to be written.
-+ * @param[out] ptk Pointer to where the PTK output is to be written.
-+ */
-+void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce,
-+ uint8_t *dnonce, uint8_t *kck, uint8_t *ptk)
-+{
-+ uint8_t idata[32];
-+ uint8_t odata[32];
-+
-+ dump_bytes("ck", mk, 16);
-+ dump_bytes("hnonce", hnonce, 16);
-+ dump_bytes("dnonce", dnonce, 16);
-+
-+ /* The data is the HNonce and DNonce concatenated */
-+ DWC_MEMCPY(&idata[0], hnonce, 16);
-+ DWC_MEMCPY(&idata[16], dnonce, 16);
-+
-+ dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata);
-+
-+ /* Low 16 bytes of the result is the KCK, high 16 is the PTK */
-+ DWC_MEMCPY(kck, &odata[0], 16);
-+ DWC_MEMCPY(ptk, &odata[16], 16);
-+
-+ dump_bytes("kck", kck, 16);
-+ dump_bytes("ptk", ptk, 16);
-+}
-+
-+/**
-+ * Generates the Message Integrity Code over the Handshake data per the
-+ * WUSB spec.
-+ *
-+ * @param ccm_nonce Pointer to CCM Nonce.
-+ * @param kck Pointer to Key Confirmation Key.
-+ * @param data Pointer to Handshake data to be checked.
-+ * @param mic Pointer to where the MIC output is to be written.
-+ */
-+void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck,
-+ uint8_t *data, uint8_t *mic)
-+{
-+
-+ dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC",
-+ data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic);
-+}
-+
-+#endif /* DWC_CRYPTOLIB */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h
-@@ -0,0 +1,111 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $
-+ * $Revision: #3 $
-+ * $Date: 2010/09/28 $
-+ * $Change: 1596182 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+
-+#ifndef _DWC_CRYPTO_H_
-+#define _DWC_CRYPTO_H_
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/** @file
-+ *
-+ * This file contains declarations for the WUSB Cryptographic routines as
-+ * defined in the WUSB spec. They are only to be used internally by the DWC UWB
-+ * modules.
-+ */
-+
-+#include "dwc_os.h"
-+
-+int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst);
-+
-+void dwc_wusb_cmf(u8 *key, u8 *nonce,
-+ char *label, u8 *bytes, int len, u8 *result);
-+void dwc_wusb_prf(int prf_len, u8 *key,
-+ u8 *nonce, char *label, u8 *bytes, int len, u8 *result);
-+
-+/**
-+ * The PRF-64 function described in section 6.5 of the WUSB spec.
-+ *
-+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf().
-+ */
-+static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce,
-+ char *label, u8 *bytes, int len, u8 *result)
-+{
-+ dwc_wusb_prf(64, key, nonce, label, bytes, len, result);
-+}
-+
-+/**
-+ * The PRF-128 function described in section 6.5 of the WUSB spec.
-+ *
-+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf().
-+ */
-+static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce,
-+ char *label, u8 *bytes, int len, u8 *result)
-+{
-+ dwc_wusb_prf(128, key, nonce, label, bytes, len, result);
-+}
-+
-+/**
-+ * The PRF-256 function described in section 6.5 of the WUSB spec.
-+ *
-+ * @param key, nonce, label, bytes, len, result Same as for dwc_prf().
-+ */
-+static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce,
-+ char *label, u8 *bytes, int len, u8 *result)
-+{
-+ dwc_wusb_prf(256, key, nonce, label, bytes, len, result);
-+}
-+
-+
-+void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
-+ uint8_t *nonce);
-+void dwc_wusb_gen_nonce(uint16_t addr,
-+ uint8_t *nonce);
-+
-+void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk,
-+ uint8_t *hnonce, uint8_t *dnonce,
-+ uint8_t *kck, uint8_t *ptk);
-+
-+
-+void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t
-+ *kck, uint8_t *data, uint8_t *mic);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _DWC_CRYPTO_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_dh.c
-@@ -0,0 +1,291 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $
-+ * $Revision: #3 $
-+ * $Date: 2010/09/28 $
-+ * $Change: 1596182 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+#ifdef DWC_CRYPTOLIB
-+
-+#ifndef CONFIG_MACH_IPMATE
-+
-+#include "dwc_dh.h"
-+#include "dwc_modpow.h"
-+
-+#ifdef DEBUG
-+/* This function prints out a buffer in the format described in the Association
-+ * Model specification. */
-+static void dh_dump(char *str, void *_num, int len)
-+{
-+ uint8_t *num = _num;
-+ int i;
-+ DWC_PRINTF("%s\n", str);
-+ for (i = 0; i < len; i ++) {
-+ DWC_PRINTF("%02x", num[i]);
-+ if (((i + 1) % 2) == 0) DWC_PRINTF(" ");
-+ if (((i + 1) % 26) == 0) DWC_PRINTF("\n");
-+ }
-+
-+ DWC_PRINTF("\n");
-+}
-+#else
-+#define dh_dump(_x...) do {; } while(0)
-+#endif
-+
-+/* Constant g value */
-+static __u32 dh_g[] = {
-+ 0x02000000,
-+};
-+
-+/* Constant p value */
-+static __u32 dh_p[] = {
-+ 0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A,
-+ 0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2,
-+ 0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4,
-+ 0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1,
-+ 0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520,
-+ 0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E,
-+ 0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895,
-+ 0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004,
-+ 0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6,
-+ 0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9,
-+ 0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA,
-+ 0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF,
-+};
-+
-+static void dh_swap_bytes(void *_in, void *_out, uint32_t len)
-+{
-+ uint8_t *in = _in;
-+ uint8_t *out = _out;
-+ int i;
-+ for (i=0; i<len; i++) {
-+ out[i] = in[len-1-i];
-+ }
-+}
-+
-+/* Computes the modular exponentiation (num^exp % mod). num, exp, and mod are
-+ * big endian numbers of size len, in bytes. Each len value must be a multiple
-+ * of 4. */
-+int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
-+ void *exp, uint32_t exp_len,
-+ void *mod, uint32_t mod_len,
-+ void *out)
-+{
-+ /* modpow() takes little endian numbers. AM uses big-endian. This
-+ * function swaps bytes of numbers before passing onto modpow. */
-+
-+ int retval = 0;
-+ uint32_t *result;
-+
-+ uint32_t *bignum_num = dwc_alloc(mem_ctx, num_len + 4);
-+ uint32_t *bignum_exp = dwc_alloc(mem_ctx, exp_len + 4);
-+ uint32_t *bignum_mod = dwc_alloc(mem_ctx, mod_len + 4);
-+
-+ dh_swap_bytes(num, &bignum_num[1], num_len);
-+ bignum_num[0] = num_len / 4;
-+
-+ dh_swap_bytes(exp, &bignum_exp[1], exp_len);
-+ bignum_exp[0] = exp_len / 4;
-+
-+ dh_swap_bytes(mod, &bignum_mod[1], mod_len);
-+ bignum_mod[0] = mod_len / 4;
-+
-+ result = dwc_modpow(mem_ctx, bignum_num, bignum_exp, bignum_mod);
-+ if (!result) {
-+ retval = -1;
-+ goto dh_modpow_nomem;
-+ }
-+
-+ dh_swap_bytes(&result[1], out, result[0] * 4);
-+ dwc_free(mem_ctx, result);
-+
-+ dh_modpow_nomem:
-+ dwc_free(mem_ctx, bignum_num);
-+ dwc_free(mem_ctx, bignum_exp);
-+ dwc_free(mem_ctx, bignum_mod);
-+ return retval;
-+}
-+
-+
-+int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pk, uint8_t *hash)
-+{
-+ int retval;
-+ uint8_t m3[385];
-+
-+#ifndef DH_TEST_VECTORS
-+ DWC_RANDOM_BYTES(exp, 32);
-+#endif
-+
-+ /* Compute the pkd */
-+ if ((retval = dwc_dh_modpow(mem_ctx, dh_g, 4,
-+ exp, 32,
-+ dh_p, 384, pk))) {
-+ return retval;
-+ }
-+
-+ m3[384] = nd;
-+ DWC_MEMCPY(&m3[0], pk, 384);
-+ DWC_SHA256(m3, 385, hash);
-+
-+ dh_dump("PK", pk, 384);
-+ dh_dump("SHA-256(M3)", hash, 32);
-+ return 0;
-+}
-+
-+int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
-+ uint8_t *exp, int is_host,
-+ char *dd, uint8_t *ck, uint8_t *kdk)
-+{
-+ int retval;
-+ uint8_t mv[784];
-+ uint8_t sha_result[32];
-+ uint8_t dhkey[384];
-+ uint8_t shared_secret[384];
-+ char *message;
-+ uint32_t vd;
-+
-+ uint8_t *pk;
-+
-+ if (is_host) {
-+ pk = pkd;
-+ }
-+ else {
-+ pk = pkh;
-+ }
-+
-+ if ((retval = dwc_dh_modpow(mem_ctx, pk, 384,
-+ exp, 32,
-+ dh_p, 384, shared_secret))) {
-+ return retval;
-+ }
-+ dh_dump("Shared Secret", shared_secret, 384);
-+
-+ DWC_SHA256(shared_secret, 384, dhkey);
-+ dh_dump("DHKEY", dhkey, 384);
-+
-+ DWC_MEMCPY(&mv[0], pkd, 384);
-+ DWC_MEMCPY(&mv[384], pkh, 384);
-+ DWC_MEMCPY(&mv[768], "displayed digest", 16);
-+ dh_dump("MV", mv, 784);
-+
-+ DWC_SHA256(mv, 784, sha_result);
-+ dh_dump("SHA-256(MV)", sha_result, 32);
-+ dh_dump("First 32-bits of SHA-256(MV)", sha_result, 4);
-+
-+ dh_swap_bytes(sha_result, &vd, 4);
-+#ifdef DEBUG
-+ DWC_PRINTF("Vd (decimal) = %d\n", vd);
-+#endif
-+
-+ switch (nd) {
-+ case 2:
-+ vd = vd % 100;
-+ DWC_SPRINTF(dd, "%02d", vd);
-+ break;
-+ case 3:
-+ vd = vd % 1000;
-+ DWC_SPRINTF(dd, "%03d", vd);
-+ break;
-+ case 4:
-+ vd = vd % 10000;
-+ DWC_SPRINTF(dd, "%04d", vd);
-+ break;
-+ }
-+#ifdef DEBUG
-+ DWC_PRINTF("Display Digits: %s\n", dd);
-+#endif
-+
-+ message = "connection key";
-+ DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
-+ dh_dump("HMAC(SHA-256, DHKey, connection key)", sha_result, 32);
-+ DWC_MEMCPY(ck, sha_result, 16);
-+
-+ message = "key derivation key";
-+ DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
-+ dh_dump("HMAC(SHA-256, DHKey, key derivation key)", sha_result, 32);
-+ DWC_MEMCPY(kdk, sha_result, 32);
-+
-+ return 0;
-+}
-+
-+
-+#ifdef DH_TEST_VECTORS
-+
-+static __u8 dh_a[] = {
-+ 0x44, 0x00, 0x51, 0xd6,
-+ 0xf0, 0xb5, 0x5e, 0xa9,
-+ 0x67, 0xab, 0x31, 0xc6,
-+ 0x8a, 0x8b, 0x5e, 0x37,
-+ 0xd9, 0x10, 0xda, 0xe0,
-+ 0xe2, 0xd4, 0x59, 0xa4,
-+ 0x86, 0x45, 0x9c, 0xaa,
-+ 0xdf, 0x36, 0x75, 0x16,
-+};
-+
-+static __u8 dh_b[] = {
-+ 0x5d, 0xae, 0xc7, 0x86,
-+ 0x79, 0x80, 0xa3, 0x24,
-+ 0x8c, 0xe3, 0x57, 0x8f,
-+ 0xc7, 0x5f, 0x1b, 0x0f,
-+ 0x2d, 0xf8, 0x9d, 0x30,
-+ 0x6f, 0xa4, 0x52, 0xcd,
-+ 0xe0, 0x7a, 0x04, 0x8a,
-+ 0xde, 0xd9, 0x26, 0x56,
-+};
-+
-+void dwc_run_dh_test_vectors(void *mem_ctx)
-+{
-+ uint8_t pkd[384];
-+ uint8_t pkh[384];
-+ uint8_t hashd[32];
-+ uint8_t hashh[32];
-+ uint8_t ck[16];
-+ uint8_t kdk[32];
-+ char dd[5];
-+
-+ DWC_PRINTF("\n\n\nDH_TEST_VECTORS\n\n");
-+
-+ /* compute the PKd and SHA-256(PKd || Nd) */
-+ DWC_PRINTF("Computing PKd\n");
-+ dwc_dh_pk(mem_ctx, 2, dh_a, pkd, hashd);
-+
-+ /* compute the PKd and SHA-256(PKh || Nd) */
-+ DWC_PRINTF("Computing PKh\n");
-+ dwc_dh_pk(mem_ctx, 2, dh_b, pkh, hashh);
-+
-+ /* compute the dhkey */
-+ dwc_dh_derive_keys(mem_ctx, 2, pkh, pkd, dh_a, 0, dd, ck, kdk);
-+}
-+#endif /* DH_TEST_VECTORS */
-+
-+#endif /* !CONFIG_MACH_IPMATE */
-+
-+#endif /* DWC_CRYPTOLIB */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_dh.h
-@@ -0,0 +1,106 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $
-+ * $Revision: #4 $
-+ * $Date: 2010/09/28 $
-+ * $Change: 1596182 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+#ifndef _DWC_DH_H_
-+#define _DWC_DH_H_
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#include "dwc_os.h"
-+
-+/** @file
-+ *
-+ * This file defines the common functions on device and host for performing
-+ * numeric association as defined in the WUSB spec. They are only to be
-+ * used internally by the DWC UWB modules. */
-+
-+extern int dwc_dh_sha256(uint8_t *message, uint32_t len, uint8_t *out);
-+extern int dwc_dh_hmac_sha256(uint8_t *message, uint32_t messagelen,
-+ uint8_t *key, uint32_t keylen,
-+ uint8_t *out);
-+extern int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
-+ void *exp, uint32_t exp_len,
-+ void *mod, uint32_t mod_len,
-+ void *out);
-+
-+/** Computes PKD or PKH, and SHA-256(PKd || Nd)
-+ *
-+ * PK = g^exp mod p.
-+ *
-+ * Input:
-+ * Nd = Number of digits on the device.
-+ *
-+ * Output:
-+ * exp = A 32-byte buffer to be filled with a randomly generated number.
-+ * used as either A or B.
-+ * pk = A 384-byte buffer to be filled with the PKH or PKD.
-+ * hash = A 32-byte buffer to be filled with SHA-256(PK || ND).
-+ */
-+extern int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pkd, uint8_t *hash);
-+
-+/** Computes the DHKEY, and VD.
-+ *
-+ * If called from host, then it will comput DHKEY=PKD^exp % p.
-+ * If called from device, then it will comput DHKEY=PKH^exp % p.
-+ *
-+ * Input:
-+ * pkd = The PKD value.
-+ * pkh = The PKH value.
-+ * exp = The A value (if device) or B value (if host) generated in dwc_wudev_dh_pk.
-+ * is_host = Set to non zero if a WUSB host is calling this function.
-+ *
-+ * Output:
-+
-+ * dd = A pointer to an buffer to be set to the displayed digits string to be shown
-+ * to the user. This buffer should be at 5 bytes long to hold 4 digits plus a
-+ * null termination character. This buffer can be used directly for display.
-+ * ck = A 16-byte buffer to be filled with the CK.
-+ * kdk = A 32-byte buffer to be filled with the KDK.
-+ */
-+extern int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
-+ uint8_t *exp, int is_host,
-+ char *dd, uint8_t *ck, uint8_t *kdk);
-+
-+#ifdef DH_TEST_VECTORS
-+extern void dwc_run_dh_test_vectors(void);
-+#endif
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _DWC_DH_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_list.h
-@@ -0,0 +1,594 @@
-+/* $OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $ */
-+/* $NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $ */
-+
-+/*
-+ * Copyright (c) 1991, 1993
-+ * The Regents of the University of California. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 3. Neither the name of the University nor the names of its contributors
-+ * may be used to endorse or promote products derived from this software
-+ * without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-+ * SUCH DAMAGE.
-+ *
-+ * @(#)queue.h 8.5 (Berkeley) 8/20/94
-+ */
-+
-+#ifndef _DWC_LIST_H_
-+#define _DWC_LIST_H_
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/** @file
-+ *
-+ * This file defines linked list operations. It is derived from BSD with
-+ * only the MACRO names being prefixed with DWC_. This is because a few of
-+ * these names conflict with those on Linux. For documentation on use, see the
-+ * inline comments in the source code. The original license for this source
-+ * code applies and is preserved in the dwc_list.h source file.
-+ */
-+
-+/*
-+ * This file defines five types of data structures: singly-linked lists,
-+ * lists, simple queues, tail queues, and circular queues.
-+ *
-+ *
-+ * A singly-linked list is headed by a single forward pointer. The elements
-+ * are singly linked for minimum space and pointer manipulation overhead at
-+ * the expense of O(n) removal for arbitrary elements. New elements can be
-+ * added to the list after an existing element or at the head of the list.
-+ * Elements being removed from the head of the list should use the explicit
-+ * macro for this purpose for optimum efficiency. A singly-linked list may
-+ * only be traversed in the forward direction. Singly-linked lists are ideal
-+ * for applications with large datasets and few or no removals or for
-+ * implementing a LIFO queue.
-+ *
-+ * A list is headed by a single forward pointer (or an array of forward
-+ * pointers for a hash table header). The elements are doubly linked
-+ * so that an arbitrary element can be removed without a need to
-+ * traverse the list. New elements can be added to the list before
-+ * or after an existing element or at the head of the list. A list
-+ * may only be traversed in the forward direction.
-+ *
-+ * A simple queue is headed by a pair of pointers, one the head of the
-+ * list and the other to the tail of the list. The elements are singly
-+ * linked to save space, so elements can only be removed from the
-+ * head of the list. New elements can be added to the list before or after
-+ * an existing element, at the head of the list, or at the end of the
-+ * list. A simple queue may only be traversed in the forward direction.
-+ *
-+ * A tail queue is headed by a pair of pointers, one to the head of the
-+ * list and the other to the tail of the list. The elements are doubly
-+ * linked so that an arbitrary element can be removed without a need to
-+ * traverse the list. New elements can be added to the list before or
-+ * after an existing element, at the head of the list, or at the end of
-+ * the list. A tail queue may be traversed in either direction.
-+ *
-+ * A circle queue is headed by a pair of pointers, one to the head of the
-+ * list and the other to the tail of the list. The elements are doubly
-+ * linked so that an arbitrary element can be removed without a need to
-+ * traverse the list. New elements can be added to the list before or after
-+ * an existing element, at the head of the list, or at the end of the list.
-+ * A circle queue may be traversed in either direction, but has a more
-+ * complex end of list detection.
-+ *
-+ * For details on the use of these macros, see the queue(3) manual page.
-+ */
-+
-+/*
-+ * Double-linked List.
-+ */
-+
-+typedef struct dwc_list_link {
-+ struct dwc_list_link *next;
-+ struct dwc_list_link *prev;
-+} dwc_list_link_t;
-+
-+#define DWC_LIST_INIT(link) do { \
-+ (link)->next = (link); \
-+ (link)->prev = (link); \
-+} while (0)
-+
-+#define DWC_LIST_FIRST(link) ((link)->next)
-+#define DWC_LIST_LAST(link) ((link)->prev)
-+#define DWC_LIST_END(link) (link)
-+#define DWC_LIST_NEXT(link) ((link)->next)
-+#define DWC_LIST_PREV(link) ((link)->prev)
-+#define DWC_LIST_EMPTY(link) \
-+ (DWC_LIST_FIRST(link) == DWC_LIST_END(link))
-+#define DWC_LIST_ENTRY(link, type, field) \
-+ (type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field))
-+
-+#if 0
-+#define DWC_LIST_INSERT_HEAD(list, link) do { \
-+ (link)->next = (list)->next; \
-+ (link)->prev = (list); \
-+ (list)->next->prev = (link); \
-+ (list)->next = (link); \
-+} while (0)
-+
-+#define DWC_LIST_INSERT_TAIL(list, link) do { \
-+ (link)->next = (list); \
-+ (link)->prev = (list)->prev; \
-+ (list)->prev->next = (link); \
-+ (list)->prev = (link); \
-+} while (0)
-+#else
-+#define DWC_LIST_INSERT_HEAD(list, link) do { \
-+ dwc_list_link_t *__next__ = (list)->next; \
-+ __next__->prev = (link); \
-+ (link)->next = __next__; \
-+ (link)->prev = (list); \
-+ (list)->next = (link); \
-+} while (0)
-+
-+#define DWC_LIST_INSERT_TAIL(list, link) do { \
-+ dwc_list_link_t *__prev__ = (list)->prev; \
-+ (list)->prev = (link); \
-+ (link)->next = (list); \
-+ (link)->prev = __prev__; \
-+ __prev__->next = (link); \
-+} while (0)
-+#endif
-+
-+#if 0
-+static inline void __list_add(struct list_head *new,
-+ struct list_head *prev,
-+ struct list_head *next)
-+{
-+ next->prev = new;
-+ new->next = next;
-+ new->prev = prev;
-+ prev->next = new;
-+}
-+
-+static inline void list_add(struct list_head *new, struct list_head *head)
-+{
-+ __list_add(new, head, head->next);
-+}
-+
-+static inline void list_add_tail(struct list_head *new, struct list_head *head)
-+{
-+ __list_add(new, head->prev, head);
-+}
-+
-+static inline void __list_del(struct list_head * prev, struct list_head * next)
-+{
-+ next->prev = prev;
-+ prev->next = next;
-+}
-+
-+static inline void list_del(struct list_head *entry)
-+{
-+ __list_del(entry->prev, entry->next);
-+ entry->next = LIST_POISON1;
-+ entry->prev = LIST_POISON2;
-+}
-+#endif
-+
-+#define DWC_LIST_REMOVE(link) do { \
-+ (link)->next->prev = (link)->prev; \
-+ (link)->prev->next = (link)->next; \
-+} while (0)
-+
-+#define DWC_LIST_REMOVE_INIT(link) do { \
-+ DWC_LIST_REMOVE(link); \
-+ DWC_LIST_INIT(link); \
-+} while (0)
-+
-+#define DWC_LIST_MOVE_HEAD(list, link) do { \
-+ DWC_LIST_REMOVE(link); \
-+ DWC_LIST_INSERT_HEAD(list, link); \
-+} while (0)
-+
-+#define DWC_LIST_MOVE_TAIL(list, link) do { \
-+ DWC_LIST_REMOVE(link); \
-+ DWC_LIST_INSERT_TAIL(list, link); \
-+} while (0)
-+
-+#define DWC_LIST_FOREACH(var, list) \
-+ for((var) = DWC_LIST_FIRST(list); \
-+ (var) != DWC_LIST_END(list); \
-+ (var) = DWC_LIST_NEXT(var))
-+
-+#define DWC_LIST_FOREACH_SAFE(var, var2, list) \
-+ for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var); \
-+ (var) != DWC_LIST_END(list); \
-+ (var) = (var2), (var2) = DWC_LIST_NEXT(var2))
-+
-+#define DWC_LIST_FOREACH_REVERSE(var, list) \
-+ for((var) = DWC_LIST_LAST(list); \
-+ (var) != DWC_LIST_END(list); \
-+ (var) = DWC_LIST_PREV(var))
-+
-+/*
-+ * Singly-linked List definitions.
-+ */
-+#define DWC_SLIST_HEAD(name, type) \
-+struct name { \
-+ struct type *slh_first; /* first element */ \
-+}
-+
-+#define DWC_SLIST_HEAD_INITIALIZER(head) \
-+ { NULL }
-+
-+#define DWC_SLIST_ENTRY(type) \
-+struct { \
-+ struct type *sle_next; /* next element */ \
-+}
-+
-+/*
-+ * Singly-linked List access methods.
-+ */
-+#define DWC_SLIST_FIRST(head) ((head)->slh_first)
-+#define DWC_SLIST_END(head) NULL
-+#define DWC_SLIST_EMPTY(head) (SLIST_FIRST(head) == SLIST_END(head))
-+#define DWC_SLIST_NEXT(elm, field) ((elm)->field.sle_next)
-+
-+#define DWC_SLIST_FOREACH(var, head, field) \
-+ for((var) = SLIST_FIRST(head); \
-+ (var) != SLIST_END(head); \
-+ (var) = SLIST_NEXT(var, field))
-+
-+#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field) \
-+ for((varp) = &SLIST_FIRST((head)); \
-+ ((var) = *(varp)) != SLIST_END(head); \
-+ (varp) = &SLIST_NEXT((var), field))
-+
-+/*
-+ * Singly-linked List functions.
-+ */
-+#define DWC_SLIST_INIT(head) { \
-+ SLIST_FIRST(head) = SLIST_END(head); \
-+}
-+
-+#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do { \
-+ (elm)->field.sle_next = (slistelm)->field.sle_next; \
-+ (slistelm)->field.sle_next = (elm); \
-+} while (0)
-+
-+#define DWC_SLIST_INSERT_HEAD(head, elm, field) do { \
-+ (elm)->field.sle_next = (head)->slh_first; \
-+ (head)->slh_first = (elm); \
-+} while (0)
-+
-+#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do { \
-+ (elm)->field.sle_next = (elm)->field.sle_next->field.sle_next; \
-+} while (0)
-+
-+#define DWC_SLIST_REMOVE_HEAD(head, field) do { \
-+ (head)->slh_first = (head)->slh_first->field.sle_next; \
-+} while (0)
-+
-+#define DWC_SLIST_REMOVE(head, elm, type, field) do { \
-+ if ((head)->slh_first == (elm)) { \
-+ SLIST_REMOVE_HEAD((head), field); \
-+ } \
-+ else { \
-+ struct type *curelm = (head)->slh_first; \
-+ while( curelm->field.sle_next != (elm) ) \
-+ curelm = curelm->field.sle_next; \
-+ curelm->field.sle_next = \
-+ curelm->field.sle_next->field.sle_next; \
-+ } \
-+} while (0)
-+
-+/*
-+ * Simple queue definitions.
-+ */
-+#define DWC_SIMPLEQ_HEAD(name, type) \
-+struct name { \
-+ struct type *sqh_first; /* first element */ \
-+ struct type **sqh_last; /* addr of last next element */ \
-+}
-+
-+#define DWC_SIMPLEQ_HEAD_INITIALIZER(head) \
-+ { NULL, &(head).sqh_first }
-+
-+#define DWC_SIMPLEQ_ENTRY(type) \
-+struct { \
-+ struct type *sqe_next; /* next element */ \
-+}
-+
-+/*
-+ * Simple queue access methods.
-+ */
-+#define DWC_SIMPLEQ_FIRST(head) ((head)->sqh_first)
-+#define DWC_SIMPLEQ_END(head) NULL
-+#define DWC_SIMPLEQ_EMPTY(head) (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
-+#define DWC_SIMPLEQ_NEXT(elm, field) ((elm)->field.sqe_next)
-+
-+#define DWC_SIMPLEQ_FOREACH(var, head, field) \
-+ for((var) = SIMPLEQ_FIRST(head); \
-+ (var) != SIMPLEQ_END(head); \
-+ (var) = SIMPLEQ_NEXT(var, field))
-+
-+/*
-+ * Simple queue functions.
-+ */
-+#define DWC_SIMPLEQ_INIT(head) do { \
-+ (head)->sqh_first = NULL; \
-+ (head)->sqh_last = &(head)->sqh_first; \
-+} while (0)
-+
-+#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do { \
-+ if (((elm)->field.sqe_next = (head)->sqh_first) == NULL) \
-+ (head)->sqh_last = &(elm)->field.sqe_next; \
-+ (head)->sqh_first = (elm); \
-+} while (0)
-+
-+#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do { \
-+ (elm)->field.sqe_next = NULL; \
-+ *(head)->sqh_last = (elm); \
-+ (head)->sqh_last = &(elm)->field.sqe_next; \
-+} while (0)
-+
-+#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do { \
-+ if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
-+ (head)->sqh_last = &(elm)->field.sqe_next; \
-+ (listelm)->field.sqe_next = (elm); \
-+} while (0)
-+
-+#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do { \
-+ if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
-+ (head)->sqh_last = &(head)->sqh_first; \
-+} while (0)
-+
-+/*
-+ * Tail queue definitions.
-+ */
-+#define DWC_TAILQ_HEAD(name, type) \
-+struct name { \
-+ struct type *tqh_first; /* first element */ \
-+ struct type **tqh_last; /* addr of last next element */ \
-+}
-+
-+#define DWC_TAILQ_HEAD_INITIALIZER(head) \
-+ { NULL, &(head).tqh_first }
-+
-+#define DWC_TAILQ_ENTRY(type) \
-+struct { \
-+ struct type *tqe_next; /* next element */ \
-+ struct type **tqe_prev; /* address of previous next element */ \
-+}
-+
-+/*
-+ * tail queue access methods
-+ */
-+#define DWC_TAILQ_FIRST(head) ((head)->tqh_first)
-+#define DWC_TAILQ_END(head) NULL
-+#define DWC_TAILQ_NEXT(elm, field) ((elm)->field.tqe_next)
-+#define DWC_TAILQ_LAST(head, headname) \
-+ (*(((struct headname *)((head)->tqh_last))->tqh_last))
-+/* XXX */
-+#define DWC_TAILQ_PREV(elm, headname, field) \
-+ (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
-+#define DWC_TAILQ_EMPTY(head) \
-+ (DWC_TAILQ_FIRST(head) == DWC_TAILQ_END(head))
-+
-+#define DWC_TAILQ_FOREACH(var, head, field) \
-+ for ((var) = DWC_TAILQ_FIRST(head); \
-+ (var) != DWC_TAILQ_END(head); \
-+ (var) = DWC_TAILQ_NEXT(var, field))
-+
-+#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field) \
-+ for ((var) = DWC_TAILQ_LAST(head, headname); \
-+ (var) != DWC_TAILQ_END(head); \
-+ (var) = DWC_TAILQ_PREV(var, headname, field))
-+
-+/*
-+ * Tail queue functions.
-+ */
-+#define DWC_TAILQ_INIT(head) do { \
-+ (head)->tqh_first = NULL; \
-+ (head)->tqh_last = &(head)->tqh_first; \
-+} while (0)
-+
-+#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do { \
-+ if (((elm)->field.tqe_next = (head)->tqh_first) != NULL) \
-+ (head)->tqh_first->field.tqe_prev = \
-+ &(elm)->field.tqe_next; \
-+ else \
-+ (head)->tqh_last = &(elm)->field.tqe_next; \
-+ (head)->tqh_first = (elm); \
-+ (elm)->field.tqe_prev = &(head)->tqh_first; \
-+} while (0)
-+
-+#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do { \
-+ (elm)->field.tqe_next = NULL; \
-+ (elm)->field.tqe_prev = (head)->tqh_last; \
-+ *(head)->tqh_last = (elm); \
-+ (head)->tqh_last = &(elm)->field.tqe_next; \
-+} while (0)
-+
-+#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \
-+ if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
-+ (elm)->field.tqe_next->field.tqe_prev = \
-+ &(elm)->field.tqe_next; \
-+ else \
-+ (head)->tqh_last = &(elm)->field.tqe_next; \
-+ (listelm)->field.tqe_next = (elm); \
-+ (elm)->field.tqe_prev = &(listelm)->field.tqe_next; \
-+} while (0)
-+
-+#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do { \
-+ (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \
-+ (elm)->field.tqe_next = (listelm); \
-+ *(listelm)->field.tqe_prev = (elm); \
-+ (listelm)->field.tqe_prev = &(elm)->field.tqe_next; \
-+} while (0)
-+
-+#define DWC_TAILQ_REMOVE(head, elm, field) do { \
-+ if (((elm)->field.tqe_next) != NULL) \
-+ (elm)->field.tqe_next->field.tqe_prev = \
-+ (elm)->field.tqe_prev; \
-+ else \
-+ (head)->tqh_last = (elm)->field.tqe_prev; \
-+ *(elm)->field.tqe_prev = (elm)->field.tqe_next; \
-+} while (0)
-+
-+#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do { \
-+ if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL) \
-+ (elm2)->field.tqe_next->field.tqe_prev = \
-+ &(elm2)->field.tqe_next; \
-+ else \
-+ (head)->tqh_last = &(elm2)->field.tqe_next; \
-+ (elm2)->field.tqe_prev = (elm)->field.tqe_prev; \
-+ *(elm2)->field.tqe_prev = (elm2); \
-+} while (0)
-+
-+/*
-+ * Circular queue definitions.
-+ */
-+#define DWC_CIRCLEQ_HEAD(name, type) \
-+struct name { \
-+ struct type *cqh_first; /* first element */ \
-+ struct type *cqh_last; /* last element */ \
-+}
-+
-+#define DWC_CIRCLEQ_HEAD_INITIALIZER(head) \
-+ { DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) }
-+
-+#define DWC_CIRCLEQ_ENTRY(type) \
-+struct { \
-+ struct type *cqe_next; /* next element */ \
-+ struct type *cqe_prev; /* previous element */ \
-+}
-+
-+/*
-+ * Circular queue access methods
-+ */
-+#define DWC_CIRCLEQ_FIRST(head) ((head)->cqh_first)
-+#define DWC_CIRCLEQ_LAST(head) ((head)->cqh_last)
-+#define DWC_CIRCLEQ_END(head) ((void *)(head))
-+#define DWC_CIRCLEQ_NEXT(elm, field) ((elm)->field.cqe_next)
-+#define DWC_CIRCLEQ_PREV(elm, field) ((elm)->field.cqe_prev)
-+#define DWC_CIRCLEQ_EMPTY(head) \
-+ (DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head))
-+
-+#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL))
-+
-+#define DWC_CIRCLEQ_FOREACH(var, head, field) \
-+ for((var) = DWC_CIRCLEQ_FIRST(head); \
-+ (var) != DWC_CIRCLEQ_END(head); \
-+ (var) = DWC_CIRCLEQ_NEXT(var, field))
-+
-+#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field) \
-+ for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \
-+ (var) != DWC_CIRCLEQ_END(head); \
-+ (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field))
-+
-+#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field) \
-+ for((var) = DWC_CIRCLEQ_LAST(head); \
-+ (var) != DWC_CIRCLEQ_END(head); \
-+ (var) = DWC_CIRCLEQ_PREV(var, field))
-+
-+/*
-+ * Circular queue functions.
-+ */
-+#define DWC_CIRCLEQ_INIT(head) do { \
-+ (head)->cqh_first = DWC_CIRCLEQ_END(head); \
-+ (head)->cqh_last = DWC_CIRCLEQ_END(head); \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do { \
-+ (elm)->field.cqe_next = NULL; \
-+ (elm)->field.cqe_prev = NULL; \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do { \
-+ (elm)->field.cqe_next = (listelm)->field.cqe_next; \
-+ (elm)->field.cqe_prev = (listelm); \
-+ if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \
-+ (head)->cqh_last = (elm); \
-+ else \
-+ (listelm)->field.cqe_next->field.cqe_prev = (elm); \
-+ (listelm)->field.cqe_next = (elm); \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do { \
-+ (elm)->field.cqe_next = (listelm); \
-+ (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \
-+ if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \
-+ (head)->cqh_first = (elm); \
-+ else \
-+ (listelm)->field.cqe_prev->field.cqe_next = (elm); \
-+ (listelm)->field.cqe_prev = (elm); \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do { \
-+ (elm)->field.cqe_next = (head)->cqh_first; \
-+ (elm)->field.cqe_prev = DWC_CIRCLEQ_END(head); \
-+ if ((head)->cqh_last == DWC_CIRCLEQ_END(head)) \
-+ (head)->cqh_last = (elm); \
-+ else \
-+ (head)->cqh_first->field.cqe_prev = (elm); \
-+ (head)->cqh_first = (elm); \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do { \
-+ (elm)->field.cqe_next = DWC_CIRCLEQ_END(head); \
-+ (elm)->field.cqe_prev = (head)->cqh_last; \
-+ if ((head)->cqh_first == DWC_CIRCLEQ_END(head)) \
-+ (head)->cqh_first = (elm); \
-+ else \
-+ (head)->cqh_last->field.cqe_next = (elm); \
-+ (head)->cqh_last = (elm); \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_REMOVE(head, elm, field) do { \
-+ if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head)) \
-+ (head)->cqh_last = (elm)->field.cqe_prev; \
-+ else \
-+ (elm)->field.cqe_next->field.cqe_prev = \
-+ (elm)->field.cqe_prev; \
-+ if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head)) \
-+ (head)->cqh_first = (elm)->field.cqe_next; \
-+ else \
-+ (elm)->field.cqe_prev->field.cqe_next = \
-+ (elm)->field.cqe_next; \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do { \
-+ DWC_CIRCLEQ_REMOVE(head, elm, field); \
-+ DWC_CIRCLEQ_INIT_ENTRY(elm, field); \
-+} while (0)
-+
-+#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do { \
-+ if (((elm2)->field.cqe_next = (elm)->field.cqe_next) == \
-+ DWC_CIRCLEQ_END(head)) \
-+ (head).cqh_last = (elm2); \
-+ else \
-+ (elm2)->field.cqe_next->field.cqe_prev = (elm2); \
-+ if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) == \
-+ DWC_CIRCLEQ_END(head)) \
-+ (head).cqh_first = (elm2); \
-+ else \
-+ (elm2)->field.cqe_prev->field.cqe_next = (elm2); \
-+} while (0)
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _DWC_LIST_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_mem.c
-@@ -0,0 +1,245 @@
-+/* Memory Debugging */
-+#ifdef DWC_DEBUG_MEMORY
-+
-+#include "dwc_os.h"
-+#include "dwc_list.h"
-+
-+struct allocation {
-+ void *addr;
-+ void *ctx;
-+ char *func;
-+ int line;
-+ uint32_t size;
-+ int dma;
-+ DWC_CIRCLEQ_ENTRY(allocation) entry;
-+};
-+
-+DWC_CIRCLEQ_HEAD(allocation_queue, allocation);
-+
-+struct allocation_manager {
-+ void *mem_ctx;
-+ struct allocation_queue allocations;
-+
-+ /* statistics */
-+ int num;
-+ int num_freed;
-+ int num_active;
-+ uint32_t total;
-+ uint32_t cur;
-+ uint32_t max;
-+};
-+
-+static struct allocation_manager *manager = NULL;
-+
-+static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr,
-+ int dma)
-+{
-+ struct allocation *a;
-+
-+ DWC_ASSERT(manager != NULL, "manager not allocated");
-+
-+ a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a));
-+ if (!a) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1);
-+ if (!a->func) {
-+ __DWC_FREE(manager->mem_ctx, a);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1);
-+ a->addr = addr;
-+ a->ctx = ctx;
-+ a->line = line;
-+ a->size = size;
-+ a->dma = dma;
-+ DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry);
-+
-+ /* Update stats */
-+ manager->num++;
-+ manager->num_active++;
-+ manager->total += size;
-+ manager->cur += size;
-+
-+ if (manager->max < manager->cur) {
-+ manager->max = manager->cur;
-+ }
-+
-+ return 0;
-+}
-+
-+static struct allocation *find_allocation(void *ctx, void *addr)
-+{
-+ struct allocation *a;
-+
-+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
-+ if (a->ctx == ctx && a->addr == addr) {
-+ return a;
-+ }
-+ }
-+
-+ return NULL;
-+}
-+
-+static void free_allocation(void *ctx, void *addr, char const *func, int line)
-+{
-+ struct allocation *a = find_allocation(ctx, addr);
-+
-+ if (!a) {
-+ DWC_ASSERT(0,
-+ "Free of address %p that was never allocated or already freed %s:%d",
-+ addr, func, line);
-+ return;
-+ }
-+
-+ DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry);
-+
-+ manager->num_active--;
-+ manager->num_freed++;
-+ manager->cur -= a->size;
-+ __DWC_FREE(manager->mem_ctx, a->func);
-+ __DWC_FREE(manager->mem_ctx, a);
-+}
-+
-+int dwc_memory_debug_start(void *mem_ctx)
-+{
-+ DWC_ASSERT(manager == NULL, "Memory debugging has already started\n");
-+
-+ if (manager) {
-+ return -DWC_E_BUSY;
-+ }
-+
-+ manager = __DWC_ALLOC(mem_ctx, sizeof(*manager));
-+ if (!manager) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ DWC_CIRCLEQ_INIT(&manager->allocations);
-+ manager->mem_ctx = mem_ctx;
-+ manager->num = 0;
-+ manager->num_freed = 0;
-+ manager->num_active = 0;
-+ manager->total = 0;
-+ manager->cur = 0;
-+ manager->max = 0;
-+
-+ return 0;
-+}
-+
-+void dwc_memory_debug_stop(void)
-+{
-+ struct allocation *a;
-+
-+ dwc_memory_debug_report();
-+
-+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
-+ DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line);
-+ free_allocation(a->ctx, a->addr, NULL, -1);
-+ }
-+
-+ __DWC_FREE(manager->mem_ctx, manager);
-+}
-+
-+void dwc_memory_debug_report(void)
-+{
-+ struct allocation *a;
-+
-+ DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n");
-+ DWC_PRINTF("Num Allocations = %d\n", manager->num);
-+ DWC_PRINTF("Freed = %d\n", manager->num_freed);
-+ DWC_PRINTF("Active = %d\n", manager->num_active);
-+ DWC_PRINTF("Current Memory Used = %d\n", manager->cur);
-+ DWC_PRINTF("Total Memory Used = %d\n", manager->total);
-+ DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max);
-+ DWC_PRINTF("Unfreed allocations:\n");
-+
-+ DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
-+ DWC_PRINTF(" addr=%p, size=%d from %s:%d, DMA=%d\n",
-+ a->addr, a->size, a->func, a->line, a->dma);
-+ }
-+}
-+
-+/* The replacement functions */
-+void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line)
-+{
-+ void *addr = __DWC_ALLOC(mem_ctx, size);
-+
-+ if (!addr) {
-+ return NULL;
-+ }
-+
-+ if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
-+ __DWC_FREE(mem_ctx, addr);
-+ return NULL;
-+ }
-+
-+ return addr;
-+}
-+
-+void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func,
-+ int line)
-+{
-+ void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size);
-+
-+ if (!addr) {
-+ return NULL;
-+ }
-+
-+ if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
-+ __DWC_FREE(mem_ctx, addr);
-+ return NULL;
-+ }
-+
-+ return addr;
-+}
-+
-+void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line)
-+{
-+ free_allocation(mem_ctx, addr, func, line);
-+ __DWC_FREE(mem_ctx, addr);
-+}
-+
-+void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
-+ char const *func, int line)
-+{
-+ void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr);
-+
-+ if (!addr) {
-+ return NULL;
-+ }
-+
-+ if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
-+ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
-+ return NULL;
-+ }
-+
-+ return addr;
-+}
-+
-+void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size,
-+ dwc_dma_t *dma_addr, char const *func, int line)
-+{
-+ void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr);
-+
-+ if (!addr) {
-+ return NULL;
-+ }
-+
-+ if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
-+ __DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
-+ return NULL;
-+ }
-+
-+ return addr;
-+}
-+
-+void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
-+ dwc_dma_t dma_addr, char const *func, int line)
-+{
-+ free_allocation(dma_ctx, virt_addr, func, line);
-+ __DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr);
-+}
-+
-+#endif /* DWC_DEBUG_MEMORY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c
-@@ -0,0 +1,636 @@
-+/* Bignum routines adapted from PUTTY sources. PuTTY copyright notice follows.
-+ *
-+ * PuTTY is copyright 1997-2007 Simon Tatham.
-+ *
-+ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian
-+ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry,
-+ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus
-+ * Kuhn, and CORE SDI S.A.
-+ *
-+ * Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation files
-+ * (the "Software"), to deal in the Software without restriction,
-+ * including without limitation the rights to use, copy, modify, merge,
-+ * publish, distribute, sublicense, and/or sell copies of the Software,
-+ * and to permit persons to whom the Software is furnished to do so,
-+ * subject to the following conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE
-+ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
-+ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
-+ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-+ *
-+ */
-+#ifdef DWC_CRYPTOLIB
-+
-+#ifndef CONFIG_MACH_IPMATE
-+
-+#include "dwc_modpow.h"
-+
-+#define BIGNUM_INT_MASK 0xFFFFFFFFUL
-+#define BIGNUM_TOP_BIT 0x80000000UL
-+#define BIGNUM_INT_BITS 32
-+
-+
-+static void *snmalloc(void *mem_ctx, size_t n, size_t size)
-+{
-+ void *p;
-+ size *= n;
-+ if (size == 0) size = 1;
-+ p = dwc_alloc(mem_ctx, size);
-+ return p;
-+}
-+
-+#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type)))
-+#define sfree dwc_free
-+
-+/*
-+ * Usage notes:
-+ * * Do not call the DIVMOD_WORD macro with expressions such as array
-+ * subscripts, as some implementations object to this (see below).
-+ * * Note that none of the division methods below will cope if the
-+ * quotient won't fit into BIGNUM_INT_BITS. Callers should be careful
-+ * to avoid this case.
-+ * If this condition occurs, in the case of the x86 DIV instruction,
-+ * an overflow exception will occur, which (according to a correspondent)
-+ * will manifest on Windows as something like
-+ * 0xC0000095: Integer overflow
-+ * The C variant won't give the right answer, either.
-+ */
-+
-+#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2)
-+
-+#if defined __GNUC__ && defined __i386__
-+#define DIVMOD_WORD(q, r, hi, lo, w) \
-+ __asm__("div %2" : \
-+ "=d" (r), "=a" (q) : \
-+ "r" (w), "d" (hi), "a" (lo))
-+#else
-+#define DIVMOD_WORD(q, r, hi, lo, w) do { \
-+ BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \
-+ q = n / w; \
-+ r = n % w; \
-+} while (0)
-+#endif
-+
-+// q = n / w;
-+// r = n % w;
-+
-+#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8)
-+
-+#define BIGNUM_INTERNAL
-+
-+static Bignum newbn(void *mem_ctx, int length)
-+{
-+ Bignum b = snewn(mem_ctx, length + 1, BignumInt);
-+ //if (!b)
-+ //abort(); /* FIXME */
-+ DWC_MEMSET(b, 0, (length + 1) * sizeof(*b));
-+ b[0] = length;
-+ return b;
-+}
-+
-+void freebn(void *mem_ctx, Bignum b)
-+{
-+ /*
-+ * Burn the evidence, just in case.
-+ */
-+ DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1));
-+ sfree(mem_ctx, b);
-+}
-+
-+/*
-+ * Compute c = a * b.
-+ * Input is in the first len words of a and b.
-+ * Result is returned in the first 2*len words of c.
-+ */
-+static void internal_mul(BignumInt *a, BignumInt *b,
-+ BignumInt *c, int len)
-+{
-+ int i, j;
-+ BignumDblInt t;
-+
-+ for (j = 0; j < 2 * len; j++)
-+ c[j] = 0;
-+
-+ for (i = len - 1; i >= 0; i--) {
-+ t = 0;
-+ for (j = len - 1; j >= 0; j--) {
-+ t += MUL_WORD(a[i], (BignumDblInt) b[j]);
-+ t += (BignumDblInt) c[i + j + 1];
-+ c[i + j + 1] = (BignumInt) t;
-+ t = t >> BIGNUM_INT_BITS;
-+ }
-+ c[i] = (BignumInt) t;
-+ }
-+}
-+
-+static void internal_add_shifted(BignumInt *number,
-+ unsigned n, int shift)
-+{
-+ int word = 1 + (shift / BIGNUM_INT_BITS);
-+ int bshift = shift % BIGNUM_INT_BITS;
-+ BignumDblInt addend;
-+
-+ addend = (BignumDblInt)n << bshift;
-+
-+ while (addend) {
-+ addend += number[word];
-+ number[word] = (BignumInt) addend & BIGNUM_INT_MASK;
-+ addend >>= BIGNUM_INT_BITS;
-+ word++;
-+ }
-+}
-+
-+/*
-+ * Compute a = a % m.
-+ * Input in first alen words of a and first mlen words of m.
-+ * Output in first alen words of a
-+ * (of which first alen-mlen words will be zero).
-+ * The MSW of m MUST have its high bit set.
-+ * Quotient is accumulated in the `quotient' array, which is a Bignum
-+ * rather than the internal bigendian format. Quotient parts are shifted
-+ * left by `qshift' before adding into quot.
-+ */
-+static void internal_mod(BignumInt *a, int alen,
-+ BignumInt *m, int mlen,
-+ BignumInt *quot, int qshift)
-+{
-+ BignumInt m0, m1;
-+ unsigned int h;
-+ int i, k;
-+
-+ m0 = m[0];
-+ if (mlen > 1)
-+ m1 = m[1];
-+ else
-+ m1 = 0;
-+
-+ for (i = 0; i <= alen - mlen; i++) {
-+ BignumDblInt t;
-+ unsigned int q, r, c, ai1;
-+
-+ if (i == 0) {
-+ h = 0;
-+ } else {
-+ h = a[i - 1];
-+ a[i - 1] = 0;
-+ }
-+
-+ if (i == alen - 1)
-+ ai1 = 0;
-+ else
-+ ai1 = a[i + 1];
-+
-+ /* Find q = h:a[i] / m0 */
-+ if (h >= m0) {
-+ /*
-+ * Special case.
-+ *
-+ * To illustrate it, suppose a BignumInt is 8 bits, and
-+ * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then
-+ * our initial division will be 0xA123 / 0xA1, which
-+ * will give a quotient of 0x100 and a divide overflow.
-+ * However, the invariants in this division algorithm
-+ * are not violated, since the full number A1:23:... is
-+ * _less_ than the quotient prefix A1:B2:... and so the
-+ * following correction loop would have sorted it out.
-+ *
-+ * In this situation we set q to be the largest
-+ * quotient we _can_ stomach (0xFF, of course).
-+ */
-+ q = BIGNUM_INT_MASK;
-+ } else {
-+ /* Macro doesn't want an array subscript expression passed
-+ * into it (see definition), so use a temporary. */
-+ BignumInt tmplo = a[i];
-+ DIVMOD_WORD(q, r, h, tmplo, m0);
-+
-+ /* Refine our estimate of q by looking at
-+ h:a[i]:a[i+1] / m0:m1 */
-+ t = MUL_WORD(m1, q);
-+ if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) {
-+ q--;
-+ t -= m1;
-+ r = (r + m0) & BIGNUM_INT_MASK; /* overflow? */
-+ if (r >= (BignumDblInt) m0 &&
-+ t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--;
-+ }
-+ }
-+
-+ /* Subtract q * m from a[i...] */
-+ c = 0;
-+ for (k = mlen - 1; k >= 0; k--) {
-+ t = MUL_WORD(q, m[k]);
-+ t += c;
-+ c = (unsigned)(t >> BIGNUM_INT_BITS);
-+ if ((BignumInt) t > a[i + k])
-+ c++;
-+ a[i + k] -= (BignumInt) t;
-+ }
-+
-+ /* Add back m in case of borrow */
-+ if (c != h) {
-+ t = 0;
-+ for (k = mlen - 1; k >= 0; k--) {
-+ t += m[k];
-+ t += a[i + k];
-+ a[i + k] = (BignumInt) t;
-+ t = t >> BIGNUM_INT_BITS;
-+ }
-+ q--;
-+ }
-+ if (quot)
-+ internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i));
-+ }
-+}
-+
-+/*
-+ * Compute p % mod.
-+ * The most significant word of mod MUST be non-zero.
-+ * We assume that the result array is the same size as the mod array.
-+ * We optionally write out a quotient if `quotient' is non-NULL.
-+ * We can avoid writing out the result if `result' is NULL.
-+ */
-+void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient)
-+{
-+ BignumInt *n, *m;
-+ int mshift;
-+ int plen, mlen, i, j;
-+
-+ /* Allocate m of size mlen, copy mod to m */
-+ /* We use big endian internally */
-+ mlen = mod[0];
-+ m = snewn(mem_ctx, mlen, BignumInt);
-+ //if (!m)
-+ //abort(); /* FIXME */
-+ for (j = 0; j < mlen; j++)
-+ m[j] = mod[mod[0] - j];
-+
-+ /* Shift m left to make msb bit set */
-+ for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++)
-+ if ((m[0] << mshift) & BIGNUM_TOP_BIT)
-+ break;
-+ if (mshift) {
-+ for (i = 0; i < mlen - 1; i++)
-+ m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift));
-+ m[mlen - 1] = m[mlen - 1] << mshift;
-+ }
-+
-+ plen = p[0];
-+ /* Ensure plen > mlen */
-+ if (plen <= mlen)
-+ plen = mlen + 1;
-+
-+ /* Allocate n of size plen, copy p to n */
-+ n = snewn(mem_ctx, plen, BignumInt);
-+ //if (!n)
-+ //abort(); /* FIXME */
-+ for (j = 0; j < plen; j++)
-+ n[j] = 0;
-+ for (j = 1; j <= (int)p[0]; j++)
-+ n[plen - j] = p[j];
-+
-+ /* Main computation */
-+ internal_mod(n, plen, m, mlen, quotient, mshift);
-+
-+ /* Fixup result in case the modulus was shifted */
-+ if (mshift) {
-+ for (i = plen - mlen - 1; i < plen - 1; i++)
-+ n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift));
-+ n[plen - 1] = n[plen - 1] << mshift;
-+ internal_mod(n, plen, m, mlen, quotient, 0);
-+ for (i = plen - 1; i >= plen - mlen; i--)
-+ n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift));
-+ }
-+
-+ /* Copy result to buffer */
-+ if (result) {
-+ for (i = 1; i <= (int)result[0]; i++) {
-+ int j = plen - i;
-+ result[i] = j >= 0 ? n[j] : 0;
-+ }
-+ }
-+
-+ /* Free temporary arrays */
-+ for (i = 0; i < mlen; i++)
-+ m[i] = 0;
-+ sfree(mem_ctx, m);
-+ for (i = 0; i < plen; i++)
-+ n[i] = 0;
-+ sfree(mem_ctx, n);
-+}
-+
-+/*
-+ * Simple remainder.
-+ */
-+Bignum bigmod(void *mem_ctx, Bignum a, Bignum b)
-+{
-+ Bignum r = newbn(mem_ctx, b[0]);
-+ bigdivmod(mem_ctx, a, b, r, NULL);
-+ return r;
-+}
-+
-+/*
-+ * Compute (base ^ exp) % mod.
-+ */
-+Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod)
-+{
-+ BignumInt *a, *b, *n, *m;
-+ int mshift;
-+ int mlen, i, j;
-+ Bignum base, result;
-+
-+ /*
-+ * The most significant word of mod needs to be non-zero. It
-+ * should already be, but let's make sure.
-+ */
-+ //assert(mod[mod[0]] != 0);
-+
-+ /*
-+ * Make sure the base is smaller than the modulus, by reducing
-+ * it modulo the modulus if not.
-+ */
-+ base = bigmod(mem_ctx, base_in, mod);
-+
-+ /* Allocate m of size mlen, copy mod to m */
-+ /* We use big endian internally */
-+ mlen = mod[0];
-+ m = snewn(mem_ctx, mlen, BignumInt);
-+ //if (!m)
-+ //abort(); /* FIXME */
-+ for (j = 0; j < mlen; j++)
-+ m[j] = mod[mod[0] - j];
-+
-+ /* Shift m left to make msb bit set */
-+ for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++)
-+ if ((m[0] << mshift) & BIGNUM_TOP_BIT)
-+ break;
-+ if (mshift) {
-+ for (i = 0; i < mlen - 1; i++)
-+ m[i] =
-+ (m[i] << mshift) | (m[i + 1] >>
-+ (BIGNUM_INT_BITS - mshift));
-+ m[mlen - 1] = m[mlen - 1] << mshift;
-+ }
-+
-+ /* Allocate n of size mlen, copy base to n */
-+ n = snewn(mem_ctx, mlen, BignumInt);
-+ //if (!n)
-+ //abort(); /* FIXME */
-+ i = mlen - base[0];
-+ for (j = 0; j < i; j++)
-+ n[j] = 0;
-+ for (j = 0; j < base[0]; j++)
-+ n[i + j] = base[base[0] - j];
-+
-+ /* Allocate a and b of size 2*mlen. Set a = 1 */
-+ a = snewn(mem_ctx, 2 * mlen, BignumInt);
-+ //if (!a)
-+ //abort(); /* FIXME */
-+ b = snewn(mem_ctx, 2 * mlen, BignumInt);
-+ //if (!b)
-+ //abort(); /* FIXME */
-+ for (i = 0; i < 2 * mlen; i++)
-+ a[i] = 0;
-+ a[2 * mlen - 1] = 1;
-+
-+ /* Skip leading zero bits of exp. */
-+ i = 0;
-+ j = BIGNUM_INT_BITS - 1;
-+ while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) {
-+ j--;
-+ if (j < 0) {
-+ i++;
-+ j = BIGNUM_INT_BITS - 1;
-+ }
-+ }
-+
-+ /* Main computation */
-+ while (i < exp[0]) {
-+ while (j >= 0) {
-+ internal_mul(a + mlen, a + mlen, b, mlen);
-+ internal_mod(b, mlen * 2, m, mlen, NULL, 0);
-+ if ((exp[exp[0] - i] & (1 << j)) != 0) {
-+ internal_mul(b + mlen, n, a, mlen);
-+ internal_mod(a, mlen * 2, m, mlen, NULL, 0);
-+ } else {
-+ BignumInt *t;
-+ t = a;
-+ a = b;
-+ b = t;
-+ }
-+ j--;
-+ }
-+ i++;
-+ j = BIGNUM_INT_BITS - 1;
-+ }
-+
-+ /* Fixup result in case the modulus was shifted */
-+ if (mshift) {
-+ for (i = mlen - 1; i < 2 * mlen - 1; i++)
-+ a[i] =
-+ (a[i] << mshift) | (a[i + 1] >>
-+ (BIGNUM_INT_BITS - mshift));
-+ a[2 * mlen - 1] = a[2 * mlen - 1] << mshift;
-+ internal_mod(a, mlen * 2, m, mlen, NULL, 0);
-+ for (i = 2 * mlen - 1; i >= mlen; i--)
-+ a[i] =
-+ (a[i] >> mshift) | (a[i - 1] <<
-+ (BIGNUM_INT_BITS - mshift));
-+ }
-+
-+ /* Copy result to buffer */
-+ result = newbn(mem_ctx, mod[0]);
-+ for (i = 0; i < mlen; i++)
-+ result[result[0] - i] = a[i + mlen];
-+ while (result[0] > 1 && result[result[0]] == 0)
-+ result[0]--;
-+
-+ /* Free temporary arrays */
-+ for (i = 0; i < 2 * mlen; i++)
-+ a[i] = 0;
-+ sfree(mem_ctx, a);
-+ for (i = 0; i < 2 * mlen; i++)
-+ b[i] = 0;
-+ sfree(mem_ctx, b);
-+ for (i = 0; i < mlen; i++)
-+ m[i] = 0;
-+ sfree(mem_ctx, m);
-+ for (i = 0; i < mlen; i++)
-+ n[i] = 0;
-+ sfree(mem_ctx, n);
-+
-+ freebn(mem_ctx, base);
-+
-+ return result;
-+}
-+
-+
-+#ifdef UNITTEST
-+
-+static __u32 dh_p[] = {
-+ 96,
-+ 0xFFFFFFFF,
-+ 0xFFFFFFFF,
-+ 0xA93AD2CA,
-+ 0x4B82D120,
-+ 0xE0FD108E,
-+ 0x43DB5BFC,
-+ 0x74E5AB31,
-+ 0x08E24FA0,
-+ 0xBAD946E2,
-+ 0x770988C0,
-+ 0x7A615D6C,
-+ 0xBBE11757,
-+ 0x177B200C,
-+ 0x521F2B18,
-+ 0x3EC86A64,
-+ 0xD8760273,
-+ 0xD98A0864,
-+ 0xF12FFA06,
-+ 0x1AD2EE6B,
-+ 0xCEE3D226,
-+ 0x4A25619D,
-+ 0x1E8C94E0,
-+ 0xDB0933D7,
-+ 0xABF5AE8C,
-+ 0xA6E1E4C7,
-+ 0xB3970F85,
-+ 0x5D060C7D,
-+ 0x8AEA7157,
-+ 0x58DBEF0A,
-+ 0xECFB8504,
-+ 0xDF1CBA64,
-+ 0xA85521AB,
-+ 0x04507A33,
-+ 0xAD33170D,
-+ 0x8AAAC42D,
-+ 0x15728E5A,
-+ 0x98FA0510,
-+ 0x15D22618,
-+ 0xEA956AE5,
-+ 0x3995497C,
-+ 0x95581718,
-+ 0xDE2BCBF6,
-+ 0x6F4C52C9,
-+ 0xB5C55DF0,
-+ 0xEC07A28F,
-+ 0x9B2783A2,
-+ 0x180E8603,
-+ 0xE39E772C,
-+ 0x2E36CE3B,
-+ 0x32905E46,
-+ 0xCA18217C,
-+ 0xF1746C08,
-+ 0x4ABC9804,
-+ 0x670C354E,
-+ 0x7096966D,
-+ 0x9ED52907,
-+ 0x208552BB,
-+ 0x1C62F356,
-+ 0xDCA3AD96,
-+ 0x83655D23,
-+ 0xFD24CF5F,
-+ 0x69163FA8,
-+ 0x1C55D39A,
-+ 0x98DA4836,
-+ 0xA163BF05,
-+ 0xC2007CB8,
-+ 0xECE45B3D,
-+ 0x49286651,
-+ 0x7C4B1FE6,
-+ 0xAE9F2411,
-+ 0x5A899FA5,
-+ 0xEE386BFB,
-+ 0xF406B7ED,
-+ 0x0BFF5CB6,
-+ 0xA637ED6B,
-+ 0xF44C42E9,
-+ 0x625E7EC6,
-+ 0xE485B576,
-+ 0x6D51C245,
-+ 0x4FE1356D,
-+ 0xF25F1437,
-+ 0x302B0A6D,
-+ 0xCD3A431B,
-+ 0xEF9519B3,
-+ 0x8E3404DD,
-+ 0x514A0879,
-+ 0x3B139B22,
-+ 0x020BBEA6,
-+ 0x8A67CC74,
-+ 0x29024E08,
-+ 0x80DC1CD1,
-+ 0xC4C6628B,
-+ 0x2168C234,
-+ 0xC90FDAA2,
-+ 0xFFFFFFFF,
-+ 0xFFFFFFFF,
-+};
-+
-+static __u32 dh_a[] = {
-+ 8,
-+ 0xdf367516,
-+ 0x86459caa,
-+ 0xe2d459a4,
-+ 0xd910dae0,
-+ 0x8a8b5e37,
-+ 0x67ab31c6,
-+ 0xf0b55ea9,
-+ 0x440051d6,
-+};
-+
-+static __u32 dh_b[] = {
-+ 8,
-+ 0xded92656,
-+ 0xe07a048a,
-+ 0x6fa452cd,
-+ 0x2df89d30,
-+ 0xc75f1b0f,
-+ 0x8ce3578f,
-+ 0x7980a324,
-+ 0x5daec786,
-+};
-+
-+static __u32 dh_g[] = {
-+ 1,
-+ 2,
-+};
-+
-+int main(void)
-+{
-+ int i;
-+ __u32 *k;
-+ k = dwc_modpow(NULL, dh_g, dh_a, dh_p);
-+
-+ printf("\n\n");
-+ for (i=0; i<k[0]; i++) {
-+ __u32 word32 = k[k[0] - i];
-+ __u16 l = word32 & 0xffff;
-+ __u16 m = (word32 & 0xffff0000) >> 16;
-+ printf("%04x %04x ", m, l);
-+ if (!((i + 1)%13)) printf("\n");
-+ }
-+ printf("\n\n");
-+
-+ if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) {
-+ printf("PASS\n\n");
-+ }
-+ else {
-+ printf("FAIL\n\n");
-+ }
-+
-+}
-+
-+#endif /* UNITTEST */
-+
-+#endif /* CONFIG_MACH_IPMATE */
-+
-+#endif /*DWC_CRYPTOLIB */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h
-@@ -0,0 +1,34 @@
-+/*
-+ * dwc_modpow.h
-+ * See dwc_modpow.c for license and changes
-+ */
-+#ifndef _DWC_MODPOW_H
-+#define _DWC_MODPOW_H
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#include "dwc_os.h"
-+
-+/** @file
-+ *
-+ * This file defines the module exponentiation function which is only used
-+ * internally by the DWC UWB modules for calculation of PKs during numeric
-+ * association. The routine is taken from the PUTTY, an open source terminal
-+ * emulator. The PUTTY License is preserved in the dwc_modpow.c file.
-+ *
-+ */
-+
-+typedef uint32_t BignumInt;
-+typedef uint64_t BignumDblInt;
-+typedef BignumInt *Bignum;
-+
-+/* Compute modular exponentiaion */
-+extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _LINUX_BIGNUM_H */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c
-@@ -0,0 +1,319 @@
-+#ifdef DWC_NOTIFYLIB
-+
-+#include "dwc_notifier.h"
-+#include "dwc_list.h"
-+
-+typedef struct dwc_observer {
-+ void *observer;
-+ dwc_notifier_callback_t callback;
-+ void *data;
-+ char *notification;
-+ DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry;
-+} observer_t;
-+
-+DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer);
-+
-+typedef struct dwc_notifier {
-+ void *mem_ctx;
-+ void *object;
-+ struct observer_queue observers;
-+ DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry;
-+} notifier_t;
-+
-+DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier);
-+
-+typedef struct manager {
-+ void *mem_ctx;
-+ void *wkq_ctx;
-+ dwc_workq_t *wq;
-+// dwc_mutex_t *mutex;
-+ struct notifier_queue notifiers;
-+} manager_t;
-+
-+static manager_t *manager = NULL;
-+
-+static int create_manager(void *mem_ctx, void *wkq_ctx)
-+{
-+ manager = dwc_alloc(mem_ctx, sizeof(manager_t));
-+ if (!manager) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ DWC_CIRCLEQ_INIT(&manager->notifiers);
-+
-+ manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ");
-+ if (!manager->wq) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ return 0;
-+}
-+
-+static void free_manager(void)
-+{
-+ dwc_workq_free(manager->wq);
-+
-+ /* All notifiers must have unregistered themselves before this module
-+ * can be removed. Hitting this assertion indicates a programmer
-+ * error. */
-+ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers),
-+ "Notification manager being freed before all notifiers have been removed");
-+ dwc_free(manager->mem_ctx, manager);
-+}
-+
-+#ifdef DEBUG
-+static void dump_manager(void)
-+{
-+ notifier_t *n;
-+ observer_t *o;
-+
-+ DWC_ASSERT(manager, "Notification manager not found");
-+
-+ DWC_DEBUG("List of all notifiers and observers:\n");
-+ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
-+ DWC_DEBUG("Notifier %p has observers:\n", n->object);
-+ DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) {
-+ DWC_DEBUG(" %p watching %s\n", o->observer, o->notification);
-+ }
-+ }
-+}
-+#else
-+#define dump_manager(...)
-+#endif
-+
-+static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification,
-+ dwc_notifier_callback_t callback, void *data)
-+{
-+ observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t));
-+
-+ if (!new_observer) {
-+ return NULL;
-+ }
-+
-+ DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry);
-+ new_observer->observer = observer;
-+ new_observer->notification = notification;
-+ new_observer->callback = callback;
-+ new_observer->data = data;
-+ return new_observer;
-+}
-+
-+static void free_observer(void *mem_ctx, observer_t *observer)
-+{
-+ dwc_free(mem_ctx, observer);
-+}
-+
-+static notifier_t *alloc_notifier(void *mem_ctx, void *object)
-+{
-+ notifier_t *notifier;
-+
-+ if (!object) {
-+ return NULL;
-+ }
-+
-+ notifier = dwc_alloc(mem_ctx, sizeof(notifier_t));
-+ if (!notifier) {
-+ return NULL;
-+ }
-+
-+ DWC_CIRCLEQ_INIT(&notifier->observers);
-+ DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry);
-+
-+ notifier->mem_ctx = mem_ctx;
-+ notifier->object = object;
-+ return notifier;
-+}
-+
-+static void free_notifier(notifier_t *notifier)
-+{
-+ observer_t *observer;
-+
-+ DWC_CIRCLEQ_FOREACH(observer, &notifier->observers, list_entry) {
-+ free_observer(notifier->mem_ctx, observer);
-+ }
-+
-+ dwc_free(notifier->mem_ctx, notifier);
-+}
-+
-+static notifier_t *find_notifier(void *object)
-+{
-+ notifier_t *notifier;
-+
-+ DWC_ASSERT(manager, "Notification manager not found");
-+
-+ if (!object) {
-+ return NULL;
-+ }
-+
-+ DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) {
-+ if (notifier->object == object) {
-+ return notifier;
-+ }
-+ }
-+
-+ return NULL;
-+}
-+
-+int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx)
-+{
-+ return create_manager(mem_ctx, wkq_ctx);
-+}
-+
-+void dwc_free_notification_manager(void)
-+{
-+ free_manager();
-+}
-+
-+dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object)
-+{
-+ notifier_t *notifier;
-+
-+ DWC_ASSERT(manager, "Notification manager not found");
-+
-+ notifier = find_notifier(object);
-+ if (notifier) {
-+ DWC_ERROR("Notifier %p is already registered\n", object);
-+ return NULL;
-+ }
-+
-+ notifier = alloc_notifier(mem_ctx, object);
-+ if (!notifier) {
-+ return NULL;
-+ }
-+
-+ DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry);
-+
-+ DWC_INFO("Notifier %p registered", object);
-+ dump_manager();
-+
-+ return notifier;
-+}
-+
-+void dwc_unregister_notifier(dwc_notifier_t *notifier)
-+{
-+ DWC_ASSERT(manager, "Notification manager not found");
-+
-+ if (!DWC_CIRCLEQ_EMPTY(&notifier->observers)) {
-+ observer_t *o;
-+
-+ DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object);
-+ DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
-+ DWC_DEBUGC(" %p watching %s\n", o->observer, o->notification);
-+ }
-+
-+ DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&notifier->observers),
-+ "Notifier %p has active observers when removing", notifier);
-+ }
-+
-+ DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry);
-+ free_notifier(notifier);
-+
-+ DWC_INFO("Notifier unregistered");
-+ dump_manager();
-+}
-+
-+/* Add an observer to observe the notifier for a particular state, event, or notification. */
-+int dwc_add_observer(void *observer, void *object, char *notification,
-+ dwc_notifier_callback_t callback, void *data)
-+{
-+ notifier_t *notifier = find_notifier(object);
-+ observer_t *new_observer;
-+
-+ if (!notifier) {
-+ DWC_ERROR("Notifier %p is not found when adding observer\n", object);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data);
-+ if (!new_observer) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ DWC_CIRCLEQ_INSERT_TAIL(&notifier->observers, new_observer, list_entry);
-+
-+ DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p",
-+ observer, object, notification, callback, data);
-+
-+ dump_manager();
-+ return 0;
-+}
-+
-+int dwc_remove_observer(void *observer)
-+{
-+ notifier_t *n;
-+
-+ DWC_ASSERT(manager, "Notification manager not found");
-+
-+ DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
-+ observer_t *o;
-+ observer_t *o2;
-+
-+ DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) {
-+ if (o->observer == observer) {
-+ DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry);
-+ DWC_INFO("Removing observer %p from notifier %p watching notification %s:",
-+ o->observer, n->object, o->notification);
-+ free_observer(n->mem_ctx, o);
-+ }
-+ }
-+ }
-+
-+ dump_manager();
-+ return 0;
-+}
-+
-+typedef struct callback_data {
-+ void *mem_ctx;
-+ dwc_notifier_callback_t cb;
-+ void *observer;
-+ void *data;
-+ void *object;
-+ char *notification;
-+ void *notification_data;
-+} cb_data_t;
-+
-+static void cb_task(void *data)
-+{
-+ cb_data_t *cb = (cb_data_t *)data;
-+
-+ cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data);
-+ dwc_free(cb->mem_ctx, cb);
-+}
-+
-+void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data)
-+{
-+ observer_t *o;
-+
-+ DWC_ASSERT(manager, "Notification manager not found");
-+
-+ DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
-+ int len = DWC_STRLEN(notification);
-+
-+ if (DWC_STRLEN(o->notification) != len) {
-+ continue;
-+ }
-+
-+ if (DWC_STRNCMP(o->notification, notification, len) == 0) {
-+ cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t));
-+
-+ if (!cb_data) {
-+ DWC_ERROR("Failed to allocate callback data\n");
-+ return;
-+ }
-+
-+ cb_data->mem_ctx = notifier->mem_ctx;
-+ cb_data->cb = o->callback;
-+ cb_data->observer = o->observer;
-+ cb_data->data = o->data;
-+ cb_data->object = notifier->object;
-+ cb_data->notification = notification;
-+ cb_data->notification_data = notification_data;
-+ DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification);
-+ DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data,
-+ "Notify callback from %p for Notification %s, to observer %p",
-+ cb_data->object, notification, cb_data->observer);
-+ }
-+ }
-+}
-+
-+#endif /* DWC_NOTIFYLIB */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h
-@@ -0,0 +1,122 @@
-+
-+#ifndef __DWC_NOTIFIER_H__
-+#define __DWC_NOTIFIER_H__
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#include "dwc_os.h"
-+
-+/** @file
-+ *
-+ * A simple implementation of the Observer pattern. Any "module" can
-+ * register as an observer or notifier. The notion of "module" is abstract and
-+ * can mean anything used to identify either an observer or notifier. Usually
-+ * it will be a pointer to a data structure which contains some state, ie an
-+ * object.
-+ *
-+ * Before any notifiers can be added, the global notification manager must be
-+ * brought up with dwc_alloc_notification_manager().
-+ * dwc_free_notification_manager() will bring it down and free all resources.
-+ * These would typically be called upon module load and unload. The
-+ * notification manager is a single global instance that handles all registered
-+ * observable modules and observers so this should be done only once.
-+ *
-+ * A module can be observable by using Notifications to publicize some general
-+ * information about it's state or operation. It does not care who listens, or
-+ * even if anyone listens, or what they do with the information. The observable
-+ * modules do not need to know any information about it's observers or their
-+ * interface, or their state or data.
-+ *
-+ * Any module can register to emit Notifications. It should publish a list of
-+ * notifications that it can emit and their behavior, such as when they will get
-+ * triggered, and what information will be provided to the observer. Then it
-+ * should register itself as an observable module. See dwc_register_notifier().
-+ *
-+ * Any module can observe any observable, registered module, provided it has a
-+ * handle to the other module and knows what notifications to observe. See
-+ * dwc_add_observer().
-+ *
-+ * A function of type dwc_notifier_callback_t is called whenever a notification
-+ * is triggered with one or more observers observing it. This function is
-+ * called in it's own process so it may sleep or block if needed. It is
-+ * guaranteed to be called sometime after the notification has occurred and will
-+ * be called once per each time the notification is triggered. It will NOT be
-+ * called in the same process context used to trigger the notification.
-+ *
-+ * @section Limitiations
-+ *
-+ * Keep in mind that Notifications that can be triggered in rapid sucession may
-+ * schedule too many processes too handle. Be aware of this limitation when
-+ * designing to use notifications, and only add notifications for appropriate
-+ * observable information.
-+ *
-+ * Also Notification callbacks are not synchronous. If you need to synchronize
-+ * the behavior between module/observer you must use other means. And perhaps
-+ * that will mean Notifications are not the proper solution.
-+ */
-+
-+struct dwc_notifier;
-+typedef struct dwc_notifier dwc_notifier_t;
-+
-+/** The callback function must be of this type.
-+ *
-+ * @param object This is the object that is being observed.
-+ * @param notification This is the notification that was triggered.
-+ * @param observer This is the observer
-+ * @param notification_data This is notification-specific data that the notifier
-+ * has included in this notification. The value of this should be published in
-+ * the documentation of the observable module with the notifications.
-+ * @param user_data This is any custom data that the observer provided when
-+ * adding itself as an observer to the notification. */
-+typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer,
-+ void *notification_data, void *user_data);
-+
-+/** Brings up the notification manager. */
-+extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx);
-+/** Brings down the notification manager. */
-+extern void dwc_free_notification_manager(void);
-+
-+/** This function registers an observable module. A dwc_notifier_t object is
-+ * returned to the observable module. This is an opaque object that is used by
-+ * the observable module to trigger notifications. This object should only be
-+ * accessible to functions that are authorized to trigger notifications for this
-+ * module. Observers do not need this object. */
-+extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object);
-+
-+/** This function unregisters an observable module. All observers have to be
-+ * removed prior to unregistration. */
-+extern void dwc_unregister_notifier(dwc_notifier_t *notifier);
-+
-+/** Add a module as an observer to the observable module. The observable module
-+ * needs to have previously registered with the notification manager.
-+ *
-+ * @param observer The observer module
-+ * @param object The module to observe
-+ * @param notification The notification to observe
-+ * @param callback The callback function to call
-+ * @param user_data Any additional user data to pass into the callback function */
-+extern int dwc_add_observer(void *observer, void *object, char *notification,
-+ dwc_notifier_callback_t callback, void *user_data);
-+
-+/** Removes the specified observer from all notifications that it is currently
-+ * observing. */
-+extern int dwc_remove_observer(void *observer);
-+
-+/** This function triggers a Notification. It should be called by the
-+ * observable module, or any module or library which the observable module
-+ * allows to trigger notification on it's behalf. Such as the dwc_cc_t.
-+ *
-+ * dwc_notify is a non-blocking function. Callbacks are scheduled called in
-+ * their own process context for each trigger. Callbacks can be blocking.
-+ * dwc_notify can be called from interrupt context if needed.
-+ *
-+ */
-+void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* __DWC_NOTIFIER_H__ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/dwc_os.h
-@@ -0,0 +1,1276 @@
-+/* =========================================================================
-+ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $
-+ * $Revision: #14 $
-+ * $Date: 2010/11/04 $
-+ * $Change: 1621695 $
-+ *
-+ * Synopsys Portability Library Software and documentation
-+ * (hereinafter, "Software") is an Unsupported proprietary work of
-+ * Synopsys, Inc. unless otherwise expressly agreed to in writing
-+ * between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product
-+ * under any End User Software License Agreement or Agreement for
-+ * Licensed Product with Synopsys or any supplement thereto. You are
-+ * permitted to use and redistribute this Software in source and binary
-+ * forms, with or without modification, provided that redistributions
-+ * of source code must retain this notice. You may not view, use,
-+ * disclose, copy or distribute this file or any information contained
-+ * herein except pursuant to this license grant from Synopsys. If you
-+ * do not agree with this notice, including the disclaimer below, then
-+ * you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
-+ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-+ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
-+ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
-+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================= */
-+#ifndef _DWC_OS_H_
-+#define _DWC_OS_H_
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/** @file
-+ *
-+ * DWC portability library, low level os-wrapper functions
-+ *
-+ */
-+
-+/* These basic types need to be defined by some OS header file or custom header
-+ * file for your specific target architecture.
-+ *
-+ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t
-+ *
-+ * Any custom or alternate header file must be added and enabled here.
-+ */
-+
-+#ifdef DWC_LINUX
-+# include <linux/types.h>
-+# ifdef CONFIG_DEBUG_MUTEXES
-+# include <linux/mutex.h>
-+# endif
-+# include <linux/spinlock.h>
-+# include <linux/errno.h>
-+# include <stdarg.h>
-+#endif
-+
-+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+# include <os_dep.h>
-+#endif
-+
-+
-+/** @name Primitive Types and Values */
-+
-+/** We define a boolean type for consistency. Can be either YES or NO */
-+typedef uint8_t dwc_bool_t;
-+#define YES 1
-+#define NO 0
-+
-+#ifdef DWC_LINUX
-+
-+/** @name Error Codes */
-+#define DWC_E_INVALID EINVAL
-+#define DWC_E_NO_MEMORY ENOMEM
-+#define DWC_E_NO_DEVICE ENODEV
-+#define DWC_E_NOT_SUPPORTED EOPNOTSUPP
-+#define DWC_E_TIMEOUT ETIMEDOUT
-+#define DWC_E_BUSY EBUSY
-+#define DWC_E_AGAIN EAGAIN
-+#define DWC_E_RESTART ERESTART
-+#define DWC_E_ABORT ECONNABORTED
-+#define DWC_E_SHUTDOWN ESHUTDOWN
-+#define DWC_E_NO_DATA ENODATA
-+#define DWC_E_DISCONNECT ECONNRESET
-+#define DWC_E_UNKNOWN EINVAL
-+#define DWC_E_NO_STREAM_RES ENOSR
-+#define DWC_E_COMMUNICATION ECOMM
-+#define DWC_E_OVERFLOW EOVERFLOW
-+#define DWC_E_PROTOCOL EPROTO
-+#define DWC_E_IN_PROGRESS EINPROGRESS
-+#define DWC_E_PIPE EPIPE
-+#define DWC_E_IO EIO
-+#define DWC_E_NO_SPACE ENOSPC
-+
-+#else
-+
-+/** @name Error Codes */
-+#define DWC_E_INVALID 1001
-+#define DWC_E_NO_MEMORY 1002
-+#define DWC_E_NO_DEVICE 1003
-+#define DWC_E_NOT_SUPPORTED 1004
-+#define DWC_E_TIMEOUT 1005
-+#define DWC_E_BUSY 1006
-+#define DWC_E_AGAIN 1007
-+#define DWC_E_RESTART 1008
-+#define DWC_E_ABORT 1009
-+#define DWC_E_SHUTDOWN 1010
-+#define DWC_E_NO_DATA 1011
-+#define DWC_E_DISCONNECT 2000
-+#define DWC_E_UNKNOWN 3000
-+#define DWC_E_NO_STREAM_RES 4001
-+#define DWC_E_COMMUNICATION 4002
-+#define DWC_E_OVERFLOW 4003
-+#define DWC_E_PROTOCOL 4004
-+#define DWC_E_IN_PROGRESS 4005
-+#define DWC_E_PIPE 4006
-+#define DWC_E_IO 4007
-+#define DWC_E_NO_SPACE 4008
-+
-+#endif
-+
-+
-+/** @name Tracing/Logging Functions
-+ *
-+ * These function provide the capability to add tracing, debugging, and error
-+ * messages, as well exceptions as assertions. The WUDEV uses these
-+ * extensively. These could be logged to the main console, the serial port, an
-+ * internal buffer, etc. These functions could also be no-op if they are too
-+ * expensive on your system. By default undefining the DEBUG macro already
-+ * no-ops some of these functions. */
-+
-+/** Returns non-zero if in interrupt context. */
-+extern dwc_bool_t DWC_IN_IRQ(void);
-+#define dwc_in_irq DWC_IN_IRQ
-+
-+/** Returns "IRQ" if DWC_IN_IRQ is true. */
-+static inline char *dwc_irq(void) {
-+ return DWC_IN_IRQ() ? "IRQ" : "";
-+}
-+
-+/** Returns non-zero if in bottom-half context. */
-+extern dwc_bool_t DWC_IN_BH(void);
-+#define dwc_in_bh DWC_IN_BH
-+
-+/** Returns "BH" if DWC_IN_BH is true. */
-+static inline char *dwc_bh(void) {
-+ return DWC_IN_BH() ? "BH" : "";
-+}
-+
-+/**
-+ * A vprintf() clone. Just call vprintf if you've got it.
-+ */
-+extern void DWC_VPRINTF(char *format, va_list args);
-+#define dwc_vprintf DWC_VPRINTF
-+
-+/**
-+ * A vsnprintf() clone. Just call vprintf if you've got it.
-+ */
-+extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args);
-+#define dwc_vsnprintf DWC_VSNPRINTF
-+
-+/**
-+ * printf() clone. Just call printf if you've go it.
-+ */
-+extern void DWC_PRINTF(char *format, ...)
-+/* This provides compiler level static checking of the parameters if you're
-+ * using GCC. */
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 1, 2)));
-+#else
-+ ;
-+#endif
-+#define dwc_printf DWC_PRINTF
-+
-+/**
-+ * sprintf() clone. Just call sprintf if you've got it.
-+ */
-+extern int DWC_SPRINTF(char *string, char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 2, 3)));
-+#else
-+ ;
-+#endif
-+#define dwc_sprintf DWC_SPRINTF
-+
-+/**
-+ * snprintf() clone. Just call snprintf if you've got it.
-+ */
-+extern int DWC_SNPRINTF(char *string, int size, char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 3, 4)));
-+#else
-+ ;
-+#endif
-+#define dwc_snprintf DWC_SNPRINTF
-+
-+/**
-+ * Prints a WARNING message. On systems that don't differentiate between
-+ * warnings and regular log messages, just print it. Indicates that something
-+ * may be wrong with the driver. Works like printf().
-+ *
-+ * Use the DWC_WARN macro to call this function.
-+ */
-+extern void __DWC_WARN(char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 1, 2)));
-+#else
-+ ;
-+#endif
-+
-+/**
-+ * Prints an error message. On systems that don't differentiate between errors
-+ * and regular log messages, just print it. Indicates that something went wrong
-+ * with the driver. Works like printf().
-+ *
-+ * Use the DWC_ERROR macro to call this function.
-+ */
-+extern void __DWC_ERROR(char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 1, 2)));
-+#else
-+ ;
-+#endif
-+
-+/**
-+ * Prints an exception error message and takes some user-defined action such as
-+ * print out a backtrace or trigger a breakpoint. Indicates that something went
-+ * abnormally wrong with the driver such as programmer error, or other
-+ * exceptional condition. It should not be ignored so even on systems without
-+ * printing capability, some action should be taken to notify the developer of
-+ * it. Works like printf().
-+ */
-+extern void DWC_EXCEPTION(char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 1, 2)));
-+#else
-+ ;
-+#endif
-+#define dwc_exception DWC_EXCEPTION
-+
-+#ifndef DWC_OTG_DEBUG_LEV
-+#define DWC_OTG_DEBUG_LEV 0
-+#endif
-+
-+#ifdef DEBUG
-+/**
-+ * Prints out a debug message. Used for logging/trace messages.
-+ *
-+ * Use the DWC_DEBUG macro to call this function
-+ */
-+extern void __DWC_DEBUG(char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 1, 2)));
-+#else
-+ ;
-+#endif
-+#else
-+#define __DWC_DEBUG printk
-+#endif
-+
-+/**
-+ * Prints out a Debug message.
-+ */
-+#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \
-+ __func__, dwc_irq(), ## _args)
-+#define dwc_debug DWC_DEBUG
-+/**
-+ * Prints out a Debug message if enabled at compile time.
-+ */
-+#if DWC_OTG_DEBUG_LEV > 0
-+#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args )
-+#else
-+#define DWC_DEBUGC(_format, _args...)
-+#endif
-+#define dwc_debugc DWC_DEBUGC
-+/**
-+ * Prints out an informative message.
-+ */
-+#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \
-+ dwc_irq(), ## _args)
-+#define dwc_info DWC_INFO
-+/**
-+ * Prints out an informative message if enabled at compile time.
-+ */
-+#if DWC_OTG_DEBUG_LEV > 1
-+#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args )
-+#else
-+#define DWC_INFOC(_format, _args...)
-+#endif
-+#define dwc_infoc DWC_INFOC
-+/**
-+ * Prints out a warning message.
-+ */
-+#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \
-+ dwc_irq(), __func__, __LINE__, ## _args)
-+#define dwc_warn DWC_WARN
-+/**
-+ * Prints out an error message.
-+ */
-+#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \
-+ dwc_irq(), __func__, __LINE__, ## _args)
-+#define dwc_error DWC_ERROR
-+
-+#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \
-+ dwc_irq(), __func__, __LINE__, ## _args)
-+#define dwc_proto_error DWC_PROTO_ERROR
-+
-+#ifdef DEBUG
-+/** Prints out a exception error message if the _expr expression fails. Disabled
-+ * if DEBUG is not enabled. */
-+#define DWC_ASSERT(_expr, _format, _args...) do { \
-+ if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \
-+ __FILE__, __LINE__, ## _args); } \
-+ } while (0)
-+#else
-+#define DWC_ASSERT(_x...)
-+#endif
-+#define dwc_assert DWC_ASSERT
-+
-+
-+/** @name Byte Ordering
-+ * The following functions are for conversions between processor's byte ordering
-+ * and specific ordering you want.
-+ */
-+
-+/** Converts 32 bit data in CPU byte ordering to little endian. */
-+extern uint32_t DWC_CPU_TO_LE32(uint32_t *p);
-+#define dwc_cpu_to_le32 DWC_CPU_TO_LE32
-+
-+/** Converts 32 bit data in CPU byte orderint to big endian. */
-+extern uint32_t DWC_CPU_TO_BE32(uint32_t *p);
-+#define dwc_cpu_to_be32 DWC_CPU_TO_BE32
-+
-+/** Converts 32 bit little endian data to CPU byte ordering. */
-+extern uint32_t DWC_LE32_TO_CPU(uint32_t *p);
-+#define dwc_le32_to_cpu DWC_LE32_TO_CPU
-+
-+/** Converts 32 bit big endian data to CPU byte ordering. */
-+extern uint32_t DWC_BE32_TO_CPU(uint32_t *p);
-+#define dwc_be32_to_cpu DWC_BE32_TO_CPU
-+
-+/** Converts 16 bit data in CPU byte ordering to little endian. */
-+extern uint16_t DWC_CPU_TO_LE16(uint16_t *p);
-+#define dwc_cpu_to_le16 DWC_CPU_TO_LE16
-+
-+/** Converts 16 bit data in CPU byte orderint to big endian. */
-+extern uint16_t DWC_CPU_TO_BE16(uint16_t *p);
-+#define dwc_cpu_to_be16 DWC_CPU_TO_BE16
-+
-+/** Converts 16 bit little endian data to CPU byte ordering. */
-+extern uint16_t DWC_LE16_TO_CPU(uint16_t *p);
-+#define dwc_le16_to_cpu DWC_LE16_TO_CPU
-+
-+/** Converts 16 bit bi endian data to CPU byte ordering. */
-+extern uint16_t DWC_BE16_TO_CPU(uint16_t *p);
-+#define dwc_be16_to_cpu DWC_BE16_TO_CPU
-+
-+
-+/** @name Register Read/Write
-+ *
-+ * The following six functions should be implemented to read/write registers of
-+ * 32-bit and 64-bit sizes. All modules use this to read/write register values.
-+ * The reg value is a pointer to the register calculated from the void *base
-+ * variable passed into the driver when it is started. */
-+
-+#ifdef DWC_LINUX
-+/* Linux doesn't need any extra parameters for register read/write, so we
-+ * just throw away the IO context parameter.
-+ */
-+/** Reads the content of a 32-bit register. */
-+extern uint32_t DWC_READ_REG32(uint32_t volatile *reg);
-+#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_)
-+
-+/** Reads the content of a 64-bit register. */
-+extern uint64_t DWC_READ_REG64(uint64_t volatile *reg);
-+#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_)
-+
-+/** Writes to a 32-bit register. */
-+extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value);
-+#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_)
-+
-+/** Writes to a 64-bit register. */
-+extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value);
-+#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_)
-+
-+/**
-+ * Modify bit values in a register. Using the
-+ * algorithm: (reg_contents & ~clear_mask) | set_mask.
-+ */
-+extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
-+#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_)
-+extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
-+#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_)
-+
-+#endif /* DWC_LINUX */
-+
-+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+typedef struct dwc_ioctx {
-+ struct device *dev;
-+ bus_space_tag_t iot;
-+ bus_space_handle_t ioh;
-+} dwc_ioctx_t;
-+
-+/** BSD needs two extra parameters for register read/write, so we pass
-+ * them in using the IO context parameter.
-+ */
-+/** Reads the content of a 32-bit register. */
-+extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg);
-+#define dwc_read_reg32 DWC_READ_REG32
-+
-+/** Reads the content of a 64-bit register. */
-+extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg);
-+#define dwc_read_reg64 DWC_READ_REG64
-+
-+/** Writes to a 32-bit register. */
-+extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value);
-+#define dwc_write_reg32 DWC_WRITE_REG32
-+
-+/** Writes to a 64-bit register. */
-+extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value);
-+#define dwc_write_reg64 DWC_WRITE_REG64
-+
-+/**
-+ * Modify bit values in a register. Using the
-+ * algorithm: (reg_contents & ~clear_mask) | set_mask.
-+ */
-+extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
-+#define dwc_modify_reg32 DWC_MODIFY_REG32
-+extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
-+#define dwc_modify_reg64 DWC_MODIFY_REG64
-+
-+#endif /* DWC_FREEBSD || DWC_NETBSD */
-+
-+/** @cond */
-+
-+/** @name Some convenience MACROS used internally. Define DWC_DEBUG_REGS to log the
-+ * register writes. */
-+
-+#ifdef DWC_LINUX
-+
-+# ifdef DWC_DEBUG_REGS
-+
-+#define dwc_define_read_write_reg_n(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
-+ return DWC_READ_REG32(&container->regs->_reg[num]); \
-+} \
-+static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
-+ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
-+ &(((uint32_t*)container->regs->_reg)[num]), data); \
-+ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
-+}
-+
-+#define dwc_define_read_write_reg(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg(_container_type *container) { \
-+ return DWC_READ_REG32(&container->regs->_reg); \
-+} \
-+static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
-+ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
-+ DWC_WRITE_REG32(&container->regs->_reg, data); \
-+}
-+
-+# else /* DWC_DEBUG_REGS */
-+
-+#define dwc_define_read_write_reg_n(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
-+ return DWC_READ_REG32(&container->regs->_reg[num]); \
-+} \
-+static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
-+ DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
-+}
-+
-+#define dwc_define_read_write_reg(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg(_container_type *container) { \
-+ return DWC_READ_REG32(&container->regs->_reg); \
-+} \
-+static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
-+ DWC_WRITE_REG32(&container->regs->_reg, data); \
-+}
-+
-+# endif /* DWC_DEBUG_REGS */
-+
-+#endif /* DWC_LINUX */
-+
-+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+
-+# ifdef DWC_DEBUG_REGS
-+
-+#define dwc_define_read_write_reg_n(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
-+ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
-+} \
-+static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
-+ DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
-+ &(((uint32_t*)container->regs->_reg)[num]), data); \
-+ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
-+}
-+
-+#define dwc_define_read_write_reg(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
-+ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
-+} \
-+static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
-+ DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
-+ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
-+}
-+
-+# else /* DWC_DEBUG_REGS */
-+
-+#define dwc_define_read_write_reg_n(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
-+ return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
-+} \
-+static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
-+ DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
-+}
-+
-+#define dwc_define_read_write_reg(_reg,_container_type) \
-+static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
-+ return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
-+} \
-+static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
-+ DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
-+}
-+
-+# endif /* DWC_DEBUG_REGS */
-+
-+#endif /* DWC_FREEBSD || DWC_NETBSD */
-+
-+/** @endcond */
-+
-+
-+#ifdef DWC_CRYPTOLIB
-+/** @name Crypto Functions
-+ *
-+ * These are the low-level cryptographic functions used by the driver. */
-+
-+/** Perform AES CBC */
-+extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out);
-+#define dwc_aes_cbc DWC_AES_CBC
-+
-+/** Fill the provided buffer with random bytes. These should be cryptographic grade random numbers. */
-+extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length);
-+#define dwc_random_bytes DWC_RANDOM_BYTES
-+
-+/** Perform the SHA-256 hash function */
-+extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out);
-+#define dwc_sha256 DWC_SHA256
-+
-+/** Calculated the HMAC-SHA256 */
-+extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out);
-+#define dwc_hmac_sha256 DWC_HMAC_SHA256
-+
-+#endif /* DWC_CRYPTOLIB */
-+
-+
-+/** @name Memory Allocation
-+ *
-+ * These function provide access to memory allocation. There are only 2 DMA
-+ * functions and 3 Regular memory functions that need to be implemented. None
-+ * of the memory debugging routines need to be implemented. The allocation
-+ * routines all ZERO the contents of the memory.
-+ *
-+ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering.
-+ * This checks for memory leaks, keeping track of alloc/free pairs. It also
-+ * keeps track of how much memory the driver is using at any given time. */
-+
-+#define DWC_PAGE_SIZE 4096
-+#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff)
-+#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0)
-+
-+#define DWC_INVALID_DMA_ADDR 0x0
-+
-+#ifdef DWC_LINUX
-+/** Type for a DMA address */
-+typedef dma_addr_t dwc_dma_t;
-+#endif
-+
-+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+typedef bus_addr_t dwc_dma_t;
-+#endif
-+
-+#ifdef DWC_FREEBSD
-+typedef struct dwc_dmactx {
-+ struct device *dev;
-+ bus_dma_tag_t dma_tag;
-+ bus_dmamap_t dma_map;
-+ bus_addr_t dma_paddr;
-+ void *dma_vaddr;
-+} dwc_dmactx_t;
-+#endif
-+
-+#ifdef DWC_NETBSD
-+typedef struct dwc_dmactx {
-+ struct device *dev;
-+ bus_dma_tag_t dma_tag;
-+ bus_dmamap_t dma_map;
-+ bus_dma_segment_t segs[1];
-+ int nsegs;
-+ bus_addr_t dma_paddr;
-+ void *dma_vaddr;
-+} dwc_dmactx_t;
-+#endif
-+
-+/* @todo these functions will be added in the future */
-+#if 0
-+/**
-+ * Creates a DMA pool from which you can allocate DMA buffers. Buffers
-+ * allocated from this pool will be guaranteed to meet the size, alignment, and
-+ * boundary requirements specified.
-+ *
-+ * @param[in] size Specifies the size of the buffers that will be allocated from
-+ * this pool.
-+ * @param[in] align Specifies the byte alignment requirements of the buffers
-+ * allocated from this pool. Must be a power of 2.
-+ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from
-+ * this pool must not cross.
-+ *
-+ * @returns A pointer to an internal opaque structure which is not to be
-+ * accessed outside of these library functions. Use this handle to specify
-+ * which pools to allocate/free DMA buffers from and also to destroy the pool,
-+ * when you are done with it.
-+ */
-+extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary);
-+
-+/**
-+ * Destroy a DMA pool. All buffers allocated from that pool must be freed first.
-+ */
-+extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool);
-+
-+/**
-+ * Allocate a buffer from the specified DMA pool and zeros its contents.
-+ */
-+extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr);
-+
-+/**
-+ * Free a previously allocated buffer from the DMA pool.
-+ */
-+extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr);
-+#endif
-+
-+/** Allocates a DMA capable buffer and zeroes its contents. */
-+extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
-+
-+/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */
-+extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
-+
-+/** Frees a previously allocated buffer. */
-+extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr);
-+
-+/** Allocates a block of memory and zeroes its contents. */
-+extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size);
-+
-+/** Allocates a block of memory and zeroes its contents, in an atomic manner
-+ * which can be used inside interrupt context. The size should be sufficiently
-+ * small, a few KB at most, such that failures are not likely to occur. Can just call
-+ * __DWC_ALLOC if it is atomic. */
-+extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size);
-+
-+/** Frees a previously allocated buffer. */
-+extern void __DWC_FREE(void *mem_ctx, void *addr);
-+
-+#ifndef DWC_DEBUG_MEMORY
-+
-+#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_)
-+#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_)
-+#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_)
-+
-+# ifdef DWC_LINUX
-+#define DWC_DMA_ALLOC(_dev, _size_, _dma_) __DWC_DMA_ALLOC(_dev, _size_, _dma_)
-+#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) __DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_)
-+#define DWC_DMA_FREE(_dev, _size_,_virt_, _dma_) __DWC_DMA_FREE(_dev, _size_, _virt_, _dma_)
-+# endif
-+
-+# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+#define DWC_DMA_ALLOC __DWC_DMA_ALLOC
-+#define DWC_DMA_FREE __DWC_DMA_FREE
-+# endif
-+extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line);
-+
-+#else /* DWC_DEBUG_MEMORY */
-+
-+extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line);
-+extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line);
-+extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line);
-+extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
-+ char const *func, int line);
-+extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
-+ char const *func, int line);
-+extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
-+ dwc_dma_t dma_addr, char const *func, int line);
-+
-+extern int dwc_memory_debug_start(void *mem_ctx);
-+extern void dwc_memory_debug_stop(void);
-+extern void dwc_memory_debug_report(void);
-+
-+#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__)
-+#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \
-+ __func__, __LINE__)
-+#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__)
-+
-+# ifdef DWC_LINUX
-+#define DWC_DMA_ALLOC(_dev, _size_, _dma_) \
-+ dwc_dma_alloc_debug(_dev, _size_, _dma_, __func__, __LINE__)
-+#define DWC_DMA_ALLOC_ATOMIC(_dev, _size_, _dma_) \
-+ dwc_dma_alloc_atomic_debug(_dev, _size_, _dma_, __func__, __LINE__)
-+#define DWC_DMA_FREE(_dev, _size_, _virt_, _dma_) \
-+ dwc_dma_free_debug(_dev, _size_, _virt_, _dma_, __func__, __LINE__)
-+# endif
-+
-+# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \
-+ _dma_, __func__, __LINE__)
-+#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \
-+ _virt_, _dma_, __func__, __LINE__)
-+# endif
-+
-+#endif /* DWC_DEBUG_MEMORY */
-+
-+#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_)
-+#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_)
-+#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_)
-+
-+#ifdef DWC_LINUX
-+/* Linux doesn't need any extra parameters for DMA buffer allocation, so we
-+ * just throw away the DMA context parameter.
-+ */
-+#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_)
-+#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_)
-+#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_)
-+#endif
-+
-+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+/** BSD needs several extra parameters for DMA buffer allocation, so we pass
-+ * them in using the DMA context parameter.
-+ */
-+#define dwc_dma_alloc DWC_DMA_ALLOC
-+#define dwc_dma_free DWC_DMA_FREE
-+#endif
-+
-+
-+/** @name Memory and String Processing */
-+
-+/** memset() clone */
-+extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size);
-+#define dwc_memset DWC_MEMSET
-+
-+/** memcpy() clone */
-+extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size);
-+#define dwc_memcpy DWC_MEMCPY
-+
-+/** memmove() clone */
-+extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size);
-+#define dwc_memmove DWC_MEMMOVE
-+
-+/** memcmp() clone */
-+extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size);
-+#define dwc_memcmp DWC_MEMCMP
-+
-+/** strcmp() clone */
-+extern int DWC_STRCMP(void *s1, void *s2);
-+#define dwc_strcmp DWC_STRCMP
-+
-+/** strncmp() clone */
-+extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size);
-+#define dwc_strncmp DWC_STRNCMP
-+
-+/** strlen() clone, for NULL terminated ASCII strings */
-+extern int DWC_STRLEN(char const *str);
-+#define dwc_strlen DWC_STRLEN
-+
-+/** strcpy() clone, for NULL terminated ASCII strings */
-+extern char *DWC_STRCPY(char *to, const char *from);
-+#define dwc_strcpy DWC_STRCPY
-+
-+/** strdup() clone. If you wish to use memory allocation debugging, this
-+ * implementation of strdup should use the DWC_* memory routines instead of
-+ * calling a predefined strdup. Otherwise the memory allocated by this routine
-+ * will not be seen by the debugging routines. */
-+extern char *DWC_STRDUP(char const *str);
-+#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_)
-+
-+/** NOT an atoi() clone. Read the description carefully. Returns an integer
-+ * converted from the string str in base 10 unless the string begins with a "0x"
-+ * in which case it is base 16. String must be a NULL terminated sequence of
-+ * ASCII characters and may optionally begin with whitespace, a + or -, and a
-+ * "0x" prefix if base 16. The remaining characters must be valid digits for
-+ * the number and end with a NULL character. If any invalid characters are
-+ * encountered or it returns with a negative error code and the results of the
-+ * conversion are undefined. On sucess it returns 0. Overflow conditions are
-+ * undefined. An example implementation using atoi() can be referenced from the
-+ * Linux implementation. */
-+extern int DWC_ATOI(const char *str, int32_t *value);
-+#define dwc_atoi DWC_ATOI
-+
-+/** Same as above but for unsigned. */
-+extern int DWC_ATOUI(const char *str, uint32_t *value);
-+#define dwc_atoui DWC_ATOUI
-+
-+#ifdef DWC_UTFLIB
-+/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */
-+extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len);
-+#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE
-+#endif
-+
-+
-+/** @name Wait queues
-+ *
-+ * Wait queues provide a means of synchronizing between threads or processes. A
-+ * process can block on a waitq if some condition is not true, waiting for it to
-+ * become true. When the waitq is triggered all waiting process will get
-+ * unblocked and the condition will be check again. Waitqs should be triggered
-+ * every time a condition can potentially change.*/
-+struct dwc_waitq;
-+
-+/** Type for a waitq */
-+typedef struct dwc_waitq dwc_waitq_t;
-+
-+/** The type of waitq condition callback function. This is called every time
-+ * condition is evaluated. */
-+typedef int (*dwc_waitq_condition_t)(void *data);
-+
-+/** Allocate a waitq */
-+extern dwc_waitq_t *DWC_WAITQ_ALLOC(void);
-+#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC()
-+
-+/** Free a waitq */
-+extern void DWC_WAITQ_FREE(dwc_waitq_t *wq);
-+#define dwc_waitq_free DWC_WAITQ_FREE
-+
-+/** Check the condition and if it is false, block on the waitq. When unblocked, check the
-+ * condition again. The function returns when the condition becomes true. The return value
-+ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */
-+extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data);
-+#define dwc_waitq_wait DWC_WAITQ_WAIT
-+
-+/** Check the condition and if it is false, block on the waitq. When unblocked,
-+ * check the condition again. The function returns when the condition become
-+ * true or the timeout has passed. The return value is 0 on condition true or
-+ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on
-+ * error. */
-+extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
-+ void *data, int32_t msecs);
-+#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT
-+
-+/** Trigger a waitq, unblocking all processes. This should be called whenever a condition
-+ * has potentially changed. */
-+extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq);
-+#define dwc_waitq_trigger DWC_WAITQ_TRIGGER
-+
-+/** Unblock all processes waiting on the waitq with an ABORTED result. */
-+extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq);
-+#define dwc_waitq_abort DWC_WAITQ_ABORT
-+
-+
-+/** @name Threads
-+ *
-+ * A thread must be explicitly stopped. It must check DWC_THREAD_SHOULD_STOP
-+ * whenever it is woken up, and then return. The DWC_THREAD_STOP function
-+ * returns the value from the thread.
-+ */
-+
-+struct dwc_thread;
-+
-+/** Type for a thread */
-+typedef struct dwc_thread dwc_thread_t;
-+
-+/** The thread function */
-+typedef int (*dwc_thread_function_t)(void *data);
-+
-+/** Create a thread and start it running the thread_function. Returns a handle
-+ * to the thread */
-+extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data);
-+#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_)
-+
-+/** Stops a thread. Return the value returned by the thread. Or will return
-+ * DWC_ABORT if the thread never started. */
-+extern int DWC_THREAD_STOP(dwc_thread_t *thread);
-+#define dwc_thread_stop DWC_THREAD_STOP
-+
-+/** Signifies to the thread that it must stop. */
-+#ifdef DWC_LINUX
-+/* Linux doesn't need any parameters for kthread_should_stop() */
-+extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void);
-+#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP()
-+
-+/* No thread_exit function in Linux */
-+#define dwc_thread_exit(_thrd_)
-+#endif
-+
-+#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
-+/** BSD needs the thread pointer for kthread_suspend_check() */
-+extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread);
-+#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP
-+
-+/** The thread must call this to exit. */
-+extern void DWC_THREAD_EXIT(dwc_thread_t *thread);
-+#define dwc_thread_exit DWC_THREAD_EXIT
-+#endif
-+
-+
-+/** @name Work queues
-+ *
-+ * Workqs are used to queue a callback function to be called at some later time,
-+ * in another thread. */
-+struct dwc_workq;
-+
-+/** Type for a workq */
-+typedef struct dwc_workq dwc_workq_t;
-+
-+/** The type of the callback function to be called. */
-+typedef void (*dwc_work_callback_t)(void *data);
-+
-+/** Allocate a workq */
-+extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name);
-+#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_)
-+
-+/** Free a workq. All work must be completed before being freed. */
-+extern void DWC_WORKQ_FREE(dwc_workq_t *workq);
-+#define dwc_workq_free DWC_WORKQ_FREE
-+
-+/** Schedule a callback on the workq, passing in data. The function will be
-+ * scheduled at some later time. */
-+extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb,
-+ void *data, char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 4, 5)));
-+#else
-+ ;
-+#endif
-+#define dwc_workq_schedule DWC_WORKQ_SCHEDULE
-+
-+/** Schedule a callback on the workq, that will be called until at least
-+ * given number miliseconds have passed. */
-+extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb,
-+ void *data, uint32_t time, char *format, ...)
-+#ifdef __GNUC__
-+ __attribute__ ((format(printf, 5, 6)));
-+#else
-+ ;
-+#endif
-+#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED
-+
-+/** The number of processes in the workq */
-+extern int DWC_WORKQ_PENDING(dwc_workq_t *workq);
-+#define dwc_workq_pending DWC_WORKQ_PENDING
-+
-+/** Blocks until all the work in the workq is complete or timed out. Returns <
-+ * 0 on timeout. */
-+extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout);
-+#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE
-+
-+
-+/** @name Tasklets
-+ *
-+ */
-+struct dwc_tasklet;
-+
-+/** Type for a tasklet */
-+typedef struct dwc_tasklet dwc_tasklet_t;
-+
-+/** The type of the callback function to be called */
-+typedef void (*dwc_tasklet_callback_t)(void *data);
-+
-+/** Allocates a tasklet */
-+extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data);
-+#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_)
-+
-+/** Frees a tasklet */
-+extern void DWC_TASK_FREE(dwc_tasklet_t *task);
-+#define dwc_task_free DWC_TASK_FREE
-+
-+/** Schedules a tasklet to run */
-+extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task);
-+#define dwc_task_schedule DWC_TASK_SCHEDULE
-+
-+extern void DWC_TASK_HI_SCHEDULE(dwc_tasklet_t *task);
-+#define dwc_task_hi_schedule DWC_TASK_HI_SCHEDULE
-+
-+/** @name Timer
-+ *
-+ * Callbacks must be small and atomic.
-+ */
-+struct dwc_timer;
-+
-+/** Type for a timer */
-+typedef struct dwc_timer dwc_timer_t;
-+
-+/** The type of the callback function to be called */
-+typedef void (*dwc_timer_callback_t)(void *data);
-+
-+/** Allocates a timer */
-+extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data);
-+#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_)
-+
-+/** Frees a timer */
-+extern void DWC_TIMER_FREE(dwc_timer_t *timer);
-+#define dwc_timer_free DWC_TIMER_FREE
-+
-+/** Schedules the timer to run at time ms from now. And will repeat at every
-+ * repeat_interval msec therafter
-+ *
-+ * Modifies a timer that is still awaiting execution to a new expiration time.
-+ * The mod_time is added to the old time. */
-+extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time);
-+#define dwc_timer_schedule DWC_TIMER_SCHEDULE
-+
-+/** Disables the timer from execution. */
-+extern void DWC_TIMER_CANCEL(dwc_timer_t *timer);
-+#define dwc_timer_cancel DWC_TIMER_CANCEL
-+
-+
-+/** @name Spinlocks
-+ *
-+ * These locks are used when the work between the lock/unlock is atomic and
-+ * short. Interrupts are also disabled during the lock/unlock and thus they are
-+ * suitable to lock between interrupt/non-interrupt context. They also lock
-+ * between processes if you have multiple CPUs or Preemption. If you don't have
-+ * multiple CPUS or Preemption, then the you can simply implement the
-+ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts. Because
-+ * the work between the lock/unlock is atomic, the process context will never
-+ * change, and so you never have to lock between processes. */
-+
-+struct dwc_spinlock;
-+
-+/** Type for a spinlock */
-+typedef struct dwc_spinlock dwc_spinlock_t;
-+
-+/** Type for the 'flags' argument to spinlock funtions */
-+typedef unsigned long dwc_irqflags_t;
-+
-+/** Returns an initialized lock variable. This function should allocate and
-+ * initialize the OS-specific data structure used for locking. This data
-+ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should
-+ * be freed by the DWC_FREE_LOCK when it is no longer used.
-+ *
-+ * For Linux Spinlock Debugging make it macro because the debugging routines use
-+ * the symbol name to determine recursive locking. Using a wrapper function
-+ * makes it falsely think recursive locking occurs. */
-+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK)
-+#define DWC_SPINLOCK_ALLOC_LINUX_DEBUG(lock) ({ \
-+ lock = DWC_ALLOC(sizeof(spinlock_t)); \
-+ if (lock) { \
-+ spin_lock_init((spinlock_t *)lock); \
-+ } \
-+})
-+#else
-+extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void);
-+#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC()
-+#endif
-+
-+/** Frees an initialized lock variable. */
-+extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock);
-+#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_)
-+
-+/** Disables interrupts and blocks until it acquires the lock.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ * @param flags Unsigned long for irq flags storage.
-+ */
-+extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags);
-+#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE
-+
-+/** Re-enables the interrupt and releases the lock.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ * @param flags Unsigned long for irq flags storage. Must be the same as was
-+ * passed into DWC_LOCK.
-+ */
-+extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags);
-+#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE
-+
-+/** Blocks until it acquires the lock.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ */
-+extern void DWC_SPINLOCK(dwc_spinlock_t *lock);
-+#define dwc_spinlock DWC_SPINLOCK
-+
-+/** Releases the lock.
-+ *
-+ * @param lock Pointer to the spinlock.
-+ */
-+extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock);
-+#define dwc_spinunlock DWC_SPINUNLOCK
-+
-+
-+/** @name Mutexes
-+ *
-+ * Unlike spinlocks Mutexes lock only between processes and the work between the
-+ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context.
-+ */
-+
-+struct dwc_mutex;
-+
-+/** Type for a mutex */
-+typedef struct dwc_mutex dwc_mutex_t;
-+
-+/* For Linux Mutex Debugging make it inline because the debugging routines use
-+ * the symbol to determine recursive locking. This makes it falsely think
-+ * recursive locking occurs. */
-+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
-+#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \
-+ __mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \
-+ mutex_init((struct mutex *)__mutexp); \
-+})
-+#endif
-+
-+/** Allocate a mutex */
-+extern dwc_mutex_t *DWC_MUTEX_ALLOC(void);
-+#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC()
-+
-+/* For memory leak debugging when using Linux Mutex Debugging */
-+#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
-+#define DWC_MUTEX_FREE(__mutexp) do { \
-+ mutex_destroy((struct mutex *)__mutexp); \
-+ DWC_FREE(__mutexp); \
-+} while(0)
-+#else
-+/** Free a mutex */
-+extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex);
-+#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_)
-+#endif
-+
-+/** Lock a mutex */
-+extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex);
-+#define dwc_mutex_lock DWC_MUTEX_LOCK
-+
-+/** Non-blocking lock returns 1 on successful lock. */
-+extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex);
-+#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK
-+
-+/** Unlock a mutex */
-+extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex);
-+#define dwc_mutex_unlock DWC_MUTEX_UNLOCK
-+
-+
-+/** @name Time */
-+
-+/** Microsecond delay.
-+ *
-+ * @param usecs Microseconds to delay.
-+ */
-+extern void DWC_UDELAY(uint32_t usecs);
-+#define dwc_udelay DWC_UDELAY
-+
-+/** Millisecond delay.
-+ *
-+ * @param msecs Milliseconds to delay.
-+ */
-+extern void DWC_MDELAY(uint32_t msecs);
-+#define dwc_mdelay DWC_MDELAY
-+
-+/** Non-busy waiting.
-+ * Sleeps for specified number of milliseconds.
-+ *
-+ * @param msecs Milliseconds to sleep.
-+ */
-+extern void DWC_MSLEEP(uint32_t msecs);
-+#define dwc_msleep DWC_MSLEEP
-+
-+/**
-+ * Returns number of milliseconds since boot.
-+ */
-+extern uint32_t DWC_TIME(void);
-+#define dwc_time DWC_TIME
-+
-+
-+
-+
-+/* @mainpage DWC Portability and Common Library
-+ *
-+ * This is the documentation for the DWC Portability and Common Library.
-+ *
-+ * @section intro Introduction
-+ *
-+ * The DWC Portability library consists of wrapper calls and data structures to
-+ * all low-level functions which are typically provided by the OS. The WUDEV
-+ * driver uses only these functions. In order to port the WUDEV driver, only
-+ * the functions in this library need to be re-implemented, with the same
-+ * behavior as documented here.
-+ *
-+ * The Common library consists of higher level functions, which rely only on
-+ * calling the functions from the DWC Portability library. These common
-+ * routines are shared across modules. Some of the common libraries need to be
-+ * used directly by the driver programmer when porting WUDEV. Such as the
-+ * parameter and notification libraries.
-+ *
-+ * @section low Portability Library OS Wrapper Functions
-+ *
-+ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that
-+ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC(). All of
-+ * these functions are included in the dwc_os.h file.
-+ *
-+ * There are many functions here covering a wide array of OS services. Please
-+ * see dwc_os.h for details, and implementation notes for each function.
-+ *
-+ * @section common Common Library Functions
-+ *
-+ * Any function starting with dwc and in all lowercase is a common library
-+ * routine. These functions have a portable implementation and do not need to
-+ * be reimplemented when porting. The common routines can be used by any
-+ * driver, and some must be used by the end user to control the drivers. For
-+ * example, you must use the Parameter common library in order to set the
-+ * parameters in the WUDEV module.
-+ *
-+ * The common libraries consist of the following:
-+ *
-+ * - Connection Contexts - Used internally and can be used by end-user. See dwc_cc.h
-+ * - Parameters - Used internally and can be used by end-user. See dwc_params.h
-+ * - Notifications - Used internally and can be used by end-user. See dwc_notifier.h
-+ * - Lists - Used internally and can be used by end-user. See dwc_list.h
-+ * - Memory Debugging - Used internally and can be used by end-user. See dwc_os.h
-+ * - Modpow - Used internally only. See dwc_modpow.h
-+ * - DH - Used internally only. See dwc_dh.h
-+ * - Crypto - Used internally only. See dwc_crypto.h
-+ *
-+ *
-+ * @section prereq Prerequistes For dwc_os.h
-+ * @subsection types Data Types
-+ *
-+ * The dwc_os.h file assumes that several low-level data types are pre defined for the
-+ * compilation environment. These data types are:
-+ *
-+ * - uint8_t - unsigned 8-bit data type
-+ * - int8_t - signed 8-bit data type
-+ * - uint16_t - unsigned 16-bit data type
-+ * - int16_t - signed 16-bit data type
-+ * - uint32_t - unsigned 32-bit data type
-+ * - int32_t - signed 32-bit data type
-+ * - uint64_t - unsigned 64-bit data type
-+ * - int64_t - signed 64-bit data type
-+ *
-+ * Ensure that these are defined before using dwc_os.h. The easiest way to do
-+ * that is to modify the top of the file to include the appropriate header.
-+ * This is already done for the Linux environment. If the DWC_LINUX macro is
-+ * defined, the correct header will be added. A standard header <stdint.h> is
-+ * also used for environments where standard C headers are available.
-+ *
-+ * @subsection stdarg Variable Arguments
-+ *
-+ * Variable arguments are provided by a standard C header <stdarg.h>. it is
-+ * available in Both the Linux and ANSI C enviornment. An equivalent must be
-+ * provided in your enviornment in order to use dwc_os.h with the debug and
-+ * tracing message functionality.
-+ *
-+ * @subsection thread Threading
-+ *
-+ * WUDEV Core must be run on an operating system that provides for multiple
-+ * threads/processes. Threading can be implemented in many ways, even in
-+ * embedded systems without an operating system. At the bare minimum, the
-+ * system should be able to start any number of processes at any time to handle
-+ * special work. It need not be a pre-emptive system. Process context can
-+ * change upon a call to a blocking function. The hardware interrupt context
-+ * that calls the module's ISR() function must be differentiable from process
-+ * context, even if your processes are impemented via a hardware interrupt.
-+ * Further locking mechanism between process must exist (or be implemented), and
-+ * process context must have a way to disable interrupts for a period of time to
-+ * lock them out. If all of this exists, the functions in dwc_os.h related to
-+ * threading should be able to be implemented with the defined behavior.
-+ *
-+ */
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _DWC_OS_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_common_port/usb.h
-@@ -0,0 +1,946 @@
-+/*
-+ * Copyright (c) 1998 The NetBSD Foundation, Inc.
-+ * All rights reserved.
-+ *
-+ * This code is derived from software contributed to The NetBSD Foundation
-+ * by Lennart Augustsson (lennart@augustsson.net) at
-+ * Carlstedt Research & Technology.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 3. All advertising materials mentioning features or use of this software
-+ * must display the following acknowledgement:
-+ * This product includes software developed by the NetBSD
-+ * Foundation, Inc. and its contributors.
-+ * 4. Neither the name of The NetBSD Foundation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
-+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
-+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-+ * POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/* Modified by Synopsys, Inc, 12/12/2007 */
-+
-+
-+#ifndef _USB_H_
-+#define _USB_H_
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/*
-+ * The USB records contain some unaligned little-endian word
-+ * components. The U[SG]ETW macros take care of both the alignment
-+ * and endian problem and should always be used to access non-byte
-+ * values.
-+ */
-+typedef u_int8_t uByte;
-+typedef u_int8_t uWord[2];
-+typedef u_int8_t uDWord[4];
-+
-+#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h))
-+#define UCONSTW(x) { (x) & 0xff, ((x) >> 8) & 0xff }
-+#define UCONSTDW(x) { (x) & 0xff, ((x) >> 8) & 0xff, \
-+ ((x) >> 16) & 0xff, ((x) >> 24) & 0xff }
-+
-+#if 1
-+#define UGETW(w) ((w)[0] | ((w)[1] << 8))
-+#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8))
-+#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24))
-+#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \
-+ (w)[1] = (u_int8_t)((v) >> 8), \
-+ (w)[2] = (u_int8_t)((v) >> 16), \
-+ (w)[3] = (u_int8_t)((v) >> 24))
-+#else
-+/*
-+ * On little-endian machines that can handle unanliged accesses
-+ * (e.g. i386) these macros can be replaced by the following.
-+ */
-+#define UGETW(w) (*(u_int16_t *)(w))
-+#define USETW(w,v) (*(u_int16_t *)(w) = (v))
-+#define UGETDW(w) (*(u_int32_t *)(w))
-+#define USETDW(w,v) (*(u_int32_t *)(w) = (v))
-+#endif
-+
-+/*
-+ * Macros for accessing UAS IU fields, which are big-endian
-+ */
-+#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l))
-+#define IUCONSTW(x) { ((x) >> 8) & 0xff, (x) & 0xff }
-+#define IUCONSTDW(x) { ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
-+ ((x) >> 8) & 0xff, (x) & 0xff }
-+#define IUGETW(w) (((w)[0] << 8) | (w)[1])
-+#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v))
-+#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3])
-+#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \
-+ (w)[1] = (u_int8_t)((v) >> 16), \
-+ (w)[2] = (u_int8_t)((v) >> 8), \
-+ (w)[3] = (u_int8_t)(v))
-+
-+#define UPACKED __attribute__((__packed__))
-+
-+typedef struct {
-+ uByte bmRequestType;
-+ uByte bRequest;
-+ uWord wValue;
-+ uWord wIndex;
-+ uWord wLength;
-+} UPACKED usb_device_request_t;
-+
-+#define UT_GET_DIR(a) ((a) & 0x80)
-+#define UT_WRITE 0x00
-+#define UT_READ 0x80
-+
-+#define UT_GET_TYPE(a) ((a) & 0x60)
-+#define UT_STANDARD 0x00
-+#define UT_CLASS 0x20
-+#define UT_VENDOR 0x40
-+
-+#define UT_GET_RECIPIENT(a) ((a) & 0x1f)
-+#define UT_DEVICE 0x00
-+#define UT_INTERFACE 0x01
-+#define UT_ENDPOINT 0x02
-+#define UT_OTHER 0x03
-+
-+#define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_DEVICE)
-+#define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE)
-+#define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT)
-+#define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_DEVICE)
-+#define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE)
-+#define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT)
-+#define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_DEVICE)
-+#define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE)
-+#define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER)
-+#define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT)
-+#define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_DEVICE)
-+#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
-+#define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER)
-+#define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT)
-+#define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_DEVICE)
-+#define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE)
-+#define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER)
-+#define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT)
-+#define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_DEVICE)
-+#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
-+#define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER)
-+#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
-+
-+/* Requests */
-+#define UR_GET_STATUS 0x00
-+#define USTAT_STANDARD_STATUS 0x00
-+#define WUSTAT_WUSB_FEATURE 0x01
-+#define WUSTAT_CHANNEL_INFO 0x02
-+#define WUSTAT_RECEIVED_DATA 0x03
-+#define WUSTAT_MAS_AVAILABILITY 0x04
-+#define WUSTAT_CURRENT_TRANSMIT_POWER 0x05
-+#define UR_CLEAR_FEATURE 0x01
-+#define UR_SET_FEATURE 0x03
-+#define UR_SET_AND_TEST_FEATURE 0x0c
-+#define UR_SET_ADDRESS 0x05
-+#define UR_GET_DESCRIPTOR 0x06
-+#define UDESC_DEVICE 0x01
-+#define UDESC_CONFIG 0x02
-+#define UDESC_STRING 0x03
-+#define UDESC_INTERFACE 0x04
-+#define UDESC_ENDPOINT 0x05
-+#define UDESC_SS_USB_COMPANION 0x30
-+#define UDESC_DEVICE_QUALIFIER 0x06
-+#define UDESC_OTHER_SPEED_CONFIGURATION 0x07
-+#define UDESC_INTERFACE_POWER 0x08
-+#define UDESC_OTG 0x09
-+#define WUDESC_SECURITY 0x0c
-+#define WUDESC_KEY 0x0d
-+#define WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf)
-+#define WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4)
-+#define WUD_KEY_TYPE_ASSOC 0x01
-+#define WUD_KEY_TYPE_GTK 0x02
-+#define WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6)
-+#define WUD_KEY_ORIGIN_HOST 0x00
-+#define WUD_KEY_ORIGIN_DEVICE 0x01
-+#define WUDESC_ENCRYPTION_TYPE 0x0e
-+#define WUDESC_BOS 0x0f
-+#define WUDESC_DEVICE_CAPABILITY 0x10
-+#define WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11
-+#define UDESC_BOS 0x0f
-+#define UDESC_DEVICE_CAPABILITY 0x10
-+#define UDESC_CS_DEVICE 0x21 /* class specific */
-+#define UDESC_CS_CONFIG 0x22
-+#define UDESC_CS_STRING 0x23
-+#define UDESC_CS_INTERFACE 0x24
-+#define UDESC_CS_ENDPOINT 0x25
-+#define UDESC_HUB 0x29
-+#define UR_SET_DESCRIPTOR 0x07
-+#define UR_GET_CONFIG 0x08
-+#define UR_SET_CONFIG 0x09
-+#define UR_GET_INTERFACE 0x0a
-+#define UR_SET_INTERFACE 0x0b
-+#define UR_SYNCH_FRAME 0x0c
-+#define WUR_SET_ENCRYPTION 0x0d
-+#define WUR_GET_ENCRYPTION 0x0e
-+#define WUR_SET_HANDSHAKE 0x0f
-+#define WUR_GET_HANDSHAKE 0x10
-+#define WUR_SET_CONNECTION 0x11
-+#define WUR_SET_SECURITY_DATA 0x12
-+#define WUR_GET_SECURITY_DATA 0x13
-+#define WUR_SET_WUSB_DATA 0x14
-+#define WUDATA_DRPIE_INFO 0x01
-+#define WUDATA_TRANSMIT_DATA 0x02
-+#define WUDATA_TRANSMIT_PARAMS 0x03
-+#define WUDATA_RECEIVE_PARAMS 0x04
-+#define WUDATA_TRANSMIT_POWER 0x05
-+#define WUR_LOOPBACK_DATA_WRITE 0x15
-+#define WUR_LOOPBACK_DATA_READ 0x16
-+#define WUR_SET_INTERFACE_DS 0x17
-+
-+/* Feature numbers */
-+#define UF_ENDPOINT_HALT 0
-+#define UF_DEVICE_REMOTE_WAKEUP 1
-+#define UF_TEST_MODE 2
-+#define UF_DEVICE_B_HNP_ENABLE 3
-+#define UF_DEVICE_A_HNP_SUPPORT 4
-+#define UF_DEVICE_A_ALT_HNP_SUPPORT 5
-+#define WUF_WUSB 3
-+#define WUF_TX_DRPIE 0x0
-+#define WUF_DEV_XMIT_PACKET 0x1
-+#define WUF_COUNT_PACKETS 0x2
-+#define WUF_CAPTURE_PACKETS 0x3
-+#define UF_FUNCTION_SUSPEND 0
-+#define UF_U1_ENABLE 48
-+#define UF_U2_ENABLE 49
-+#define UF_LTM_ENABLE 50
-+
-+/* Class requests from the USB 2.0 hub spec, table 11-15 */
-+#define UCR_CLEAR_HUB_FEATURE (0x2000 | UR_CLEAR_FEATURE)
-+#define UCR_CLEAR_PORT_FEATURE (0x2300 | UR_CLEAR_FEATURE)
-+#define UCR_GET_HUB_DESCRIPTOR (0xa000 | UR_GET_DESCRIPTOR)
-+#define UCR_GET_HUB_STATUS (0xa000 | UR_GET_STATUS)
-+#define UCR_GET_PORT_STATUS (0xa300 | UR_GET_STATUS)
-+#define UCR_SET_HUB_FEATURE (0x2000 | UR_SET_FEATURE)
-+#define UCR_SET_PORT_FEATURE (0x2300 | UR_SET_FEATURE)
-+#define UCR_SET_AND_TEST_PORT_FEATURE (0xa300 | UR_SET_AND_TEST_FEATURE)
-+
-+#ifdef _MSC_VER
-+#include <pshpack1.h>
-+#endif
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bDescriptorSubtype;
-+} UPACKED usb_descriptor_t;
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+} UPACKED usb_descriptor_header_t;
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uWord bcdUSB;
-+#define UD_USB_2_0 0x0200
-+#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0)
-+ uByte bDeviceClass;
-+ uByte bDeviceSubClass;
-+ uByte bDeviceProtocol;
-+ uByte bMaxPacketSize;
-+ /* The fields below are not part of the initial descriptor. */
-+ uWord idVendor;
-+ uWord idProduct;
-+ uWord bcdDevice;
-+ uByte iManufacturer;
-+ uByte iProduct;
-+ uByte iSerialNumber;
-+ uByte bNumConfigurations;
-+} UPACKED usb_device_descriptor_t;
-+#define USB_DEVICE_DESCRIPTOR_SIZE 18
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uWord wTotalLength;
-+ uByte bNumInterface;
-+ uByte bConfigurationValue;
-+ uByte iConfiguration;
-+#define UC_ATT_ONE (1 << 7) /* must be set */
-+#define UC_ATT_SELFPOWER (1 << 6) /* self powered */
-+#define UC_ATT_WAKEUP (1 << 5) /* can wakeup */
-+#define UC_ATT_BATTERY (1 << 4) /* battery powered */
-+ uByte bmAttributes;
-+#define UC_BUS_POWERED 0x80
-+#define UC_SELF_POWERED 0x40
-+#define UC_REMOTE_WAKEUP 0x20
-+ uByte bMaxPower; /* max current in 2 mA units */
-+#define UC_POWER_FACTOR 2
-+} UPACKED usb_config_descriptor_t;
-+#define USB_CONFIG_DESCRIPTOR_SIZE 9
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bInterfaceNumber;
-+ uByte bAlternateSetting;
-+ uByte bNumEndpoints;
-+ uByte bInterfaceClass;
-+ uByte bInterfaceSubClass;
-+ uByte bInterfaceProtocol;
-+ uByte iInterface;
-+} UPACKED usb_interface_descriptor_t;
-+#define USB_INTERFACE_DESCRIPTOR_SIZE 9
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bEndpointAddress;
-+#define UE_GET_DIR(a) ((a) & 0x80)
-+#define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7))
-+#define UE_DIR_IN 0x80
-+#define UE_DIR_OUT 0x00
-+#define UE_ADDR 0x0f
-+#define UE_GET_ADDR(a) ((a) & UE_ADDR)
-+ uByte bmAttributes;
-+#define UE_XFERTYPE 0x03
-+#define UE_CONTROL 0x00
-+#define UE_ISOCHRONOUS 0x01
-+#define UE_BULK 0x02
-+#define UE_INTERRUPT 0x03
-+#define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE)
-+#define UE_ISO_TYPE 0x0c
-+#define UE_ISO_ASYNC 0x04
-+#define UE_ISO_ADAPT 0x08
-+#define UE_ISO_SYNC 0x0c
-+#define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE)
-+ uWord wMaxPacketSize;
-+ uByte bInterval;
-+} UPACKED usb_endpoint_descriptor_t;
-+#define USB_ENDPOINT_DESCRIPTOR_SIZE 7
-+
-+typedef struct ss_endpoint_companion_descriptor {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bMaxBurst;
-+#define USSE_GET_MAX_STREAMS(a) ((a) & 0x1f)
-+#define USSE_SET_MAX_STREAMS(a, b) ((a) | ((b) & 0x1f))
-+#define USSE_GET_MAX_PACKET_NUM(a) ((a) & 0x03)
-+#define USSE_SET_MAX_PACKET_NUM(a, b) ((a) | ((b) & 0x03))
-+ uByte bmAttributes;
-+ uWord wBytesPerInterval;
-+} UPACKED ss_endpoint_companion_descriptor_t;
-+#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uWord bString[127];
-+} UPACKED usb_string_descriptor_t;
-+#define USB_MAX_STRING_LEN 128
-+#define USB_LANGUAGE_TABLE 0 /* # of the string language id table */
-+
-+/* Hub specific request */
-+#define UR_GET_BUS_STATE 0x02
-+#define UR_CLEAR_TT_BUFFER 0x08
-+#define UR_RESET_TT 0x09
-+#define UR_GET_TT_STATE 0x0a
-+#define UR_STOP_TT 0x0b
-+
-+/* Hub features */
-+#define UHF_C_HUB_LOCAL_POWER 0
-+#define UHF_C_HUB_OVER_CURRENT 1
-+#define UHF_PORT_CONNECTION 0
-+#define UHF_PORT_ENABLE 1
-+#define UHF_PORT_SUSPEND 2
-+#define UHF_PORT_OVER_CURRENT 3
-+#define UHF_PORT_RESET 4
-+#define UHF_PORT_L1 5
-+#define UHF_PORT_POWER 8
-+#define UHF_PORT_LOW_SPEED 9
-+#define UHF_PORT_HIGH_SPEED 10
-+#define UHF_C_PORT_CONNECTION 16
-+#define UHF_C_PORT_ENABLE 17
-+#define UHF_C_PORT_SUSPEND 18
-+#define UHF_C_PORT_OVER_CURRENT 19
-+#define UHF_C_PORT_RESET 20
-+#define UHF_C_PORT_L1 23
-+#define UHF_PORT_TEST 21
-+#define UHF_PORT_INDICATOR 22
-+
-+typedef struct {
-+ uByte bDescLength;
-+ uByte bDescriptorType;
-+ uByte bNbrPorts;
-+ uWord wHubCharacteristics;
-+#define UHD_PWR 0x0003
-+#define UHD_PWR_GANGED 0x0000
-+#define UHD_PWR_INDIVIDUAL 0x0001
-+#define UHD_PWR_NO_SWITCH 0x0002
-+#define UHD_COMPOUND 0x0004
-+#define UHD_OC 0x0018
-+#define UHD_OC_GLOBAL 0x0000
-+#define UHD_OC_INDIVIDUAL 0x0008
-+#define UHD_OC_NONE 0x0010
-+#define UHD_TT_THINK 0x0060
-+#define UHD_TT_THINK_8 0x0000
-+#define UHD_TT_THINK_16 0x0020
-+#define UHD_TT_THINK_24 0x0040
-+#define UHD_TT_THINK_32 0x0060
-+#define UHD_PORT_IND 0x0080
-+ uByte bPwrOn2PwrGood; /* delay in 2 ms units */
-+#define UHD_PWRON_FACTOR 2
-+ uByte bHubContrCurrent;
-+ uByte DeviceRemovable[32]; /* max 255 ports */
-+#define UHD_NOT_REMOV(desc, i) \
-+ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
-+ /* deprecated */ uByte PortPowerCtrlMask[1];
-+} UPACKED usb_hub_descriptor_t;
-+#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uWord bcdUSB;
-+ uByte bDeviceClass;
-+ uByte bDeviceSubClass;
-+ uByte bDeviceProtocol;
-+ uByte bMaxPacketSize0;
-+ uByte bNumConfigurations;
-+ uByte bReserved;
-+} UPACKED usb_device_qualifier_t;
-+#define USB_DEVICE_QUALIFIER_SIZE 10
-+
-+typedef struct {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bmAttributes;
-+#define UOTG_SRP 0x01
-+#define UOTG_HNP 0x02
-+} UPACKED usb_otg_descriptor_t;
-+
-+/* OTG feature selectors */
-+#define UOTG_B_HNP_ENABLE 3
-+#define UOTG_A_HNP_SUPPORT 4
-+#define UOTG_A_ALT_HNP_SUPPORT 5
-+
-+typedef struct {
-+ uWord wStatus;
-+/* Device status flags */
-+#define UDS_SELF_POWERED 0x0001
-+#define UDS_REMOTE_WAKEUP 0x0002
-+/* Endpoint status flags */
-+#define UES_HALT 0x0001
-+} UPACKED usb_status_t;
-+
-+typedef struct {
-+ uWord wHubStatus;
-+#define UHS_LOCAL_POWER 0x0001
-+#define UHS_OVER_CURRENT 0x0002
-+ uWord wHubChange;
-+} UPACKED usb_hub_status_t;
-+
-+typedef struct {
-+ uWord wPortStatus;
-+#define UPS_CURRENT_CONNECT_STATUS 0x0001
-+#define UPS_PORT_ENABLED 0x0002
-+#define UPS_SUSPEND 0x0004
-+#define UPS_OVERCURRENT_INDICATOR 0x0008
-+#define UPS_RESET 0x0010
-+#define UPS_PORT_POWER 0x0100
-+#define UPS_LOW_SPEED 0x0200
-+#define UPS_HIGH_SPEED 0x0400
-+#define UPS_PORT_TEST 0x0800
-+#define UPS_PORT_INDICATOR 0x1000
-+ uWord wPortChange;
-+#define UPS_C_CONNECT_STATUS 0x0001
-+#define UPS_C_PORT_ENABLED 0x0002
-+#define UPS_C_SUSPEND 0x0004
-+#define UPS_C_OVERCURRENT_INDICATOR 0x0008
-+#define UPS_C_PORT_RESET 0x0010
-+} UPACKED usb_port_status_t;
-+
-+#ifdef _MSC_VER
-+#include <poppack.h>
-+#endif
-+
-+/* Device class codes */
-+#define UDCLASS_IN_INTERFACE 0x00
-+#define UDCLASS_COMM 0x02
-+#define UDCLASS_HUB 0x09
-+#define UDSUBCLASS_HUB 0x00
-+#define UDPROTO_FSHUB 0x00
-+#define UDPROTO_HSHUBSTT 0x01
-+#define UDPROTO_HSHUBMTT 0x02
-+#define UDCLASS_DIAGNOSTIC 0xdc
-+#define UDCLASS_WIRELESS 0xe0
-+#define UDSUBCLASS_RF 0x01
-+#define UDPROTO_BLUETOOTH 0x01
-+#define UDCLASS_VENDOR 0xff
-+
-+/* Interface class codes */
-+#define UICLASS_UNSPEC 0x00
-+
-+#define UICLASS_AUDIO 0x01
-+#define UISUBCLASS_AUDIOCONTROL 1
-+#define UISUBCLASS_AUDIOSTREAM 2
-+#define UISUBCLASS_MIDISTREAM 3
-+
-+#define UICLASS_CDC 0x02 /* communication */
-+#define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1
-+#define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2
-+#define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3
-+#define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4
-+#define UISUBCLASS_CAPI_CONTROLMODEL 5
-+#define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
-+#define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
-+#define UIPROTO_CDC_AT 1
-+
-+#define UICLASS_HID 0x03
-+#define UISUBCLASS_BOOT 1
-+#define UIPROTO_BOOT_KEYBOARD 1
-+
-+#define UICLASS_PHYSICAL 0x05
-+
-+#define UICLASS_IMAGE 0x06
-+
-+#define UICLASS_PRINTER 0x07
-+#define UISUBCLASS_PRINTER 1
-+#define UIPROTO_PRINTER_UNI 1
-+#define UIPROTO_PRINTER_BI 2
-+#define UIPROTO_PRINTER_1284 3
-+
-+#define UICLASS_MASS 0x08
-+#define UISUBCLASS_RBC 1
-+#define UISUBCLASS_SFF8020I 2
-+#define UISUBCLASS_QIC157 3
-+#define UISUBCLASS_UFI 4
-+#define UISUBCLASS_SFF8070I 5
-+#define UISUBCLASS_SCSI 6
-+#define UIPROTO_MASS_CBI_I 0
-+#define UIPROTO_MASS_CBI 1
-+#define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */
-+#define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */
-+
-+#define UICLASS_HUB 0x09
-+#define UISUBCLASS_HUB 0
-+#define UIPROTO_FSHUB 0
-+#define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */
-+#define UIPROTO_HSHUBMTT 1
-+
-+#define UICLASS_CDC_DATA 0x0a
-+#define UISUBCLASS_DATA 0
-+#define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */
-+#define UIPROTO_DATA_HDLC 0x31 /* HDLC */
-+#define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */
-+#define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */
-+#define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */
-+#define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */
-+#define UIPROTO_DATA_V42BIS 0x90 /* Data compression */
-+#define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */
-+#define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */
-+#define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */
-+#define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */
-+#define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc.*/
-+#define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */
-+
-+#define UICLASS_SMARTCARD 0x0b
-+
-+/*#define UICLASS_FIRM_UPD 0x0c*/
-+
-+#define UICLASS_SECURITY 0x0d
-+
-+#define UICLASS_DIAGNOSTIC 0xdc
-+
-+#define UICLASS_WIRELESS 0xe0
-+#define UISUBCLASS_RF 0x01
-+#define UIPROTO_BLUETOOTH 0x01
-+
-+#define UICLASS_APPL_SPEC 0xfe
-+#define UISUBCLASS_FIRMWARE_DOWNLOAD 1
-+#define UISUBCLASS_IRDA 2
-+#define UIPROTO_IRDA 0
-+
-+#define UICLASS_VENDOR 0xff
-+
-+#define USB_HUB_MAX_DEPTH 5
-+
-+/*
-+ * Minimum time a device needs to be powered down to go through
-+ * a power cycle. XXX Are these time in the spec?
-+ */
-+#define USB_POWER_DOWN_TIME 200 /* ms */
-+#define USB_PORT_POWER_DOWN_TIME 100 /* ms */
-+
-+#if 0
-+/* These are the values from the spec. */
-+#define USB_PORT_RESET_DELAY 10 /* ms */
-+#define USB_PORT_ROOT_RESET_DELAY 50 /* ms */
-+#define USB_PORT_RESET_RECOVERY 10 /* ms */
-+#define USB_PORT_POWERUP_DELAY 100 /* ms */
-+#define USB_SET_ADDRESS_SETTLE 2 /* ms */
-+#define USB_RESUME_DELAY (20*5) /* ms */
-+#define USB_RESUME_WAIT 10 /* ms */
-+#define USB_RESUME_RECOVERY 10 /* ms */
-+#define USB_EXTRA_POWER_UP_TIME 0 /* ms */
-+#else
-+/* Allow for marginal (i.e. non-conforming) devices. */
-+#define USB_PORT_RESET_DELAY 50 /* ms */
-+#define USB_PORT_ROOT_RESET_DELAY 250 /* ms */
-+#define USB_PORT_RESET_RECOVERY 250 /* ms */
-+#define USB_PORT_POWERUP_DELAY 300 /* ms */
-+#define USB_SET_ADDRESS_SETTLE 10 /* ms */
-+#define USB_RESUME_DELAY (50*5) /* ms */
-+#define USB_RESUME_WAIT 50 /* ms */
-+#define USB_RESUME_RECOVERY 50 /* ms */
-+#define USB_EXTRA_POWER_UP_TIME 20 /* ms */
-+#endif
-+
-+#define USB_MIN_POWER 100 /* mA */
-+#define USB_MAX_POWER 500 /* mA */
-+
-+#define USB_BUS_RESET_DELAY 100 /* ms XXX?*/
-+
-+#define USB_UNCONFIG_NO 0
-+#define USB_UNCONFIG_INDEX (-1)
-+
-+/*** ioctl() related stuff ***/
-+
-+struct usb_ctl_request {
-+ int ucr_addr;
-+ usb_device_request_t ucr_request;
-+ void *ucr_data;
-+ int ucr_flags;
-+#define USBD_SHORT_XFER_OK 0x04 /* allow short reads */
-+ int ucr_actlen; /* actual length transferred */
-+};
-+
-+struct usb_alt_interface {
-+ int uai_config_index;
-+ int uai_interface_index;
-+ int uai_alt_no;
-+};
-+
-+#define USB_CURRENT_CONFIG_INDEX (-1)
-+#define USB_CURRENT_ALT_INDEX (-1)
-+
-+struct usb_config_desc {
-+ int ucd_config_index;
-+ usb_config_descriptor_t ucd_desc;
-+};
-+
-+struct usb_interface_desc {
-+ int uid_config_index;
-+ int uid_interface_index;
-+ int uid_alt_index;
-+ usb_interface_descriptor_t uid_desc;
-+};
-+
-+struct usb_endpoint_desc {
-+ int ued_config_index;
-+ int ued_interface_index;
-+ int ued_alt_index;
-+ int ued_endpoint_index;
-+ usb_endpoint_descriptor_t ued_desc;
-+};
-+
-+struct usb_full_desc {
-+ int ufd_config_index;
-+ u_int ufd_size;
-+ u_char *ufd_data;
-+};
-+
-+struct usb_string_desc {
-+ int usd_string_index;
-+ int usd_language_id;
-+ usb_string_descriptor_t usd_desc;
-+};
-+
-+struct usb_ctl_report_desc {
-+ int ucrd_size;
-+ u_char ucrd_data[1024]; /* filled data size will vary */
-+};
-+
-+typedef struct { u_int32_t cookie; } usb_event_cookie_t;
-+
-+#define USB_MAX_DEVNAMES 4
-+#define USB_MAX_DEVNAMELEN 16
-+struct usb_device_info {
-+ u_int8_t udi_bus;
-+ u_int8_t udi_addr; /* device address */
-+ usb_event_cookie_t udi_cookie;
-+ char udi_product[USB_MAX_STRING_LEN];
-+ char udi_vendor[USB_MAX_STRING_LEN];
-+ char udi_release[8];
-+ u_int16_t udi_productNo;
-+ u_int16_t udi_vendorNo;
-+ u_int16_t udi_releaseNo;
-+ u_int8_t udi_class;
-+ u_int8_t udi_subclass;
-+ u_int8_t udi_protocol;
-+ u_int8_t udi_config;
-+ u_int8_t udi_speed;
-+#define USB_SPEED_UNKNOWN 0
-+#define USB_SPEED_LOW 1
-+#define USB_SPEED_FULL 2
-+#define USB_SPEED_HIGH 3
-+#define USB_SPEED_VARIABLE 4
-+#define USB_SPEED_SUPER 5
-+ int udi_power; /* power consumption in mA, 0 if selfpowered */
-+ int udi_nports;
-+ char udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN];
-+ u_int8_t udi_ports[16];/* hub only: addresses of devices on ports */
-+#define USB_PORT_ENABLED 0xff
-+#define USB_PORT_SUSPENDED 0xfe
-+#define USB_PORT_POWERED 0xfd
-+#define USB_PORT_DISABLED 0xfc
-+};
-+
-+struct usb_ctl_report {
-+ int ucr_report;
-+ u_char ucr_data[1024]; /* filled data size will vary */
-+};
-+
-+struct usb_device_stats {
-+ u_long uds_requests[4]; /* indexed by transfer type UE_* */
-+};
-+
-+#define WUSB_MIN_IE 0x80
-+#define WUSB_WCTA_IE 0x80
-+#define WUSB_WCONNECTACK_IE 0x81
-+#define WUSB_WHOSTINFO_IE 0x82
-+#define WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3)
-+#define WUHI_CA_RECONN 0x00
-+#define WUHI_CA_LIMITED 0x01
-+#define WUHI_CA_ALL 0x03
-+#define WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3)
-+#define WUSB_WCHCHANGEANNOUNCE_IE 0x83
-+#define WUSB_WDEV_DISCONNECT_IE 0x84
-+#define WUSB_WHOST_DISCONNECT_IE 0x85
-+#define WUSB_WRELEASE_CHANNEL_IE 0x86
-+#define WUSB_WWORK_IE 0x87
-+#define WUSB_WCHANNEL_STOP_IE 0x88
-+#define WUSB_WDEV_KEEPALIVE_IE 0x89
-+#define WUSB_WISOCH_DISCARD_IE 0x8A
-+#define WUSB_WRESETDEVICE_IE 0x8B
-+#define WUSB_WXMIT_PACKET_ADJUST_IE 0x8C
-+#define WUSB_MAX_IE 0x8C
-+
-+/* Device Notification Types */
-+
-+#define WUSB_DN_MIN 0x01
-+#define WUSB_DN_CONNECT 0x01
-+# define WUSB_DA_OLDCONN 0x00
-+# define WUSB_DA_NEWCONN 0x01
-+# define WUSB_DA_SELF_BEACON 0x02
-+# define WUSB_DA_DIR_BEACON 0x04
-+# define WUSB_DA_NO_BEACON 0x06
-+#define WUSB_DN_DISCONNECT 0x02
-+#define WUSB_DN_EPRDY 0x03
-+#define WUSB_DN_MASAVAILCHANGED 0x04
-+#define WUSB_DN_REMOTEWAKEUP 0x05
-+#define WUSB_DN_SLEEP 0x06
-+#define WUSB_DN_ALIVE 0x07
-+#define WUSB_DN_MAX 0x07
-+
-+#ifdef _MSC_VER
-+#include <pshpack1.h>
-+#endif
-+
-+/* WUSB Handshake Data. Used during the SET/GET HANDSHAKE requests */
-+typedef struct wusb_hndshk_data {
-+ uByte bMessageNumber;
-+ uByte bStatus;
-+ uByte tTKID[3];
-+ uByte bReserved;
-+ uByte CDID[16];
-+ uByte Nonce[16];
-+ uByte MIC[8];
-+} UPACKED wusb_hndshk_data_t;
-+#define WUSB_HANDSHAKE_LEN_FOR_MIC 38
-+
-+/* WUSB Connection Context */
-+typedef struct wusb_conn_context {
-+ uByte CHID [16];
-+ uByte CDID [16];
-+ uByte CK [16];
-+} UPACKED wusb_conn_context_t;
-+
-+/* WUSB Security Descriptor */
-+typedef struct wusb_security_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uWord wTotalLength;
-+ uByte bNumEncryptionTypes;
-+} UPACKED wusb_security_desc_t;
-+
-+/* WUSB Encryption Type Descriptor */
-+typedef struct wusb_encrypt_type_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+
-+ uByte bEncryptionType;
-+#define WUETD_UNSECURE 0
-+#define WUETD_WIRED 1
-+#define WUETD_CCM_1 2
-+#define WUETD_RSA_1 3
-+
-+ uByte bEncryptionValue;
-+ uByte bAuthKeyIndex;
-+} UPACKED wusb_encrypt_type_desc_t;
-+
-+/* WUSB Key Descriptor */
-+typedef struct wusb_key_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte tTKID[3];
-+ uByte bReserved;
-+ uByte KeyData[1]; /* variable length */
-+} UPACKED wusb_key_desc_t;
-+
-+/* WUSB BOS Descriptor (Binary device Object Store) */
-+typedef struct wusb_bos_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uWord wTotalLength;
-+ uByte bNumDeviceCaps;
-+} UPACKED wusb_bos_desc_t;
-+
-+#define USB_DEVICE_CAPABILITY_20_EXTENSION 0x02
-+typedef struct usb_dev_cap_20_ext_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bDevCapabilityType;
-+#define USB_20_EXT_LPM 0x02
-+ uDWord bmAttributes;
-+} UPACKED usb_dev_cap_20_ext_desc_t;
-+
-+#define USB_DEVICE_CAPABILITY_SS_USB 0x03
-+typedef struct usb_dev_cap_ss_usb {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bDevCapabilityType;
-+#define USB_DC_SS_USB_LTM_CAPABLE 0x02
-+ uByte bmAttributes;
-+#define USB_DC_SS_USB_SPEED_SUPPORT_LOW 0x01
-+#define USB_DC_SS_USB_SPEED_SUPPORT_FULL 0x02
-+#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH 0x04
-+#define USB_DC_SS_USB_SPEED_SUPPORT_SS 0x08
-+ uWord wSpeedsSupported;
-+ uByte bFunctionalitySupport;
-+ uByte bU1DevExitLat;
-+ uWord wU2DevExitLat;
-+} UPACKED usb_dev_cap_ss_usb_t;
-+
-+#define USB_DEVICE_CAPABILITY_CONTAINER_ID 0x04
-+typedef struct usb_dev_cap_container_id {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bDevCapabilityType;
-+ uByte bReserved;
-+ uByte containerID[16];
-+} UPACKED usb_dev_cap_container_id_t;
-+
-+/* Device Capability Type Codes */
-+#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01
-+
-+/* Device Capability Descriptor */
-+typedef struct wusb_dev_cap_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bDevCapabilityType;
-+ uByte caps[1]; /* Variable length */
-+} UPACKED wusb_dev_cap_desc_t;
-+
-+/* Device Capability Descriptor */
-+typedef struct wusb_dev_cap_uwb_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bDevCapabilityType;
-+ uByte bmAttributes;
-+ uWord wPHYRates; /* Bitmap */
-+ uByte bmTFITXPowerInfo;
-+ uByte bmFFITXPowerInfo;
-+ uWord bmBandGroup;
-+ uByte bReserved;
-+} UPACKED wusb_dev_cap_uwb_desc_t;
-+
-+/* Wireless USB Endpoint Companion Descriptor */
-+typedef struct wusb_endpoint_companion_desc {
-+ uByte bLength;
-+ uByte bDescriptorType;
-+ uByte bMaxBurst;
-+ uByte bMaxSequence;
-+ uWord wMaxStreamDelay;
-+ uWord wOverTheAirPacketSize;
-+ uByte bOverTheAirInterval;
-+ uByte bmCompAttributes;
-+} UPACKED wusb_endpoint_companion_desc_t;
-+
-+/* Wireless USB Numeric Association M1 Data Structure */
-+typedef struct wusb_m1_data {
-+ uByte version;
-+ uWord langId;
-+ uByte deviceFriendlyNameLength;
-+ uByte sha_256_m3[32];
-+ uByte deviceFriendlyName[256];
-+} UPACKED wusb_m1_data_t;
-+
-+typedef struct wusb_m2_data {
-+ uByte version;
-+ uWord langId;
-+ uByte hostFriendlyNameLength;
-+ uByte pkh[384];
-+ uByte hostFriendlyName[256];
-+} UPACKED wusb_m2_data_t;
-+
-+typedef struct wusb_m3_data {
-+ uByte pkd[384];
-+ uByte nd;
-+} UPACKED wusb_m3_data_t;
-+
-+typedef struct wusb_m4_data {
-+ uDWord _attributeTypeIdAndLength_1;
-+ uWord associationTypeId;
-+
-+ uDWord _attributeTypeIdAndLength_2;
-+ uWord associationSubTypeId;
-+
-+ uDWord _attributeTypeIdAndLength_3;
-+ uDWord length;
-+
-+ uDWord _attributeTypeIdAndLength_4;
-+ uDWord associationStatus;
-+
-+ uDWord _attributeTypeIdAndLength_5;
-+ uByte chid[16];
-+
-+ uDWord _attributeTypeIdAndLength_6;
-+ uByte cdid[16];
-+
-+ uDWord _attributeTypeIdAndLength_7;
-+ uByte bandGroups[2];
-+} UPACKED wusb_m4_data_t;
-+
-+#ifdef _MSC_VER
-+#include <poppack.h>
-+#endif
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _USB_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/Makefile
-@@ -0,0 +1,82 @@
-+#
-+# Makefile for DWC_otg Highspeed USB controller driver
-+#
-+
-+ifneq ($(KERNELRELEASE),)
-+
-+# Use the BUS_INTERFACE variable to compile the software for either
-+# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus.
-+ifeq ($(BUS_INTERFACE),)
-+# BUS_INTERFACE = -DPCI_INTERFACE
-+# BUS_INTERFACE = -DLM_INTERFACE
-+ BUS_INTERFACE = -DPLATFORM_INTERFACE
-+endif
-+
-+#ccflags-y += -DDEBUG
-+#ccflags-y += -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs
-+
-+# Use one of the following flags to compile the software in host-only or
-+# device-only mode.
-+#ccflags-y += -DDWC_HOST_ONLY
-+#ccflags-y += -DDWC_DEVICE_ONLY
-+
-+ccflags-y += -Dlinux -DDWC_HS_ELECT_TST
-+#ccflags-y += -DDWC_EN_ISOC
-+ccflags-y += -I$(obj)/../dwc_common_port
-+#ccflags-y += -I$(PORTLIB)
-+ccflags-y += -DDWC_LINUX
-+ccflags-y += $(CFI)
-+ccflags-y += $(BUS_INTERFACE)
-+#ccflags-y += -DDWC_DEV_SRPCAP
-+
-+obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o
-+
-+dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o
-+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
-+dwc_otg-objs += dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o
-+dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o
-+dwc_otg-objs += dwc_otg_adp.o
-+dwc_otg-objs += dwc_otg_fiq_fsm.o
-+dwc_otg-objs += dwc_otg_fiq_stub.o
-+ifneq ($(CFI),)
-+dwc_otg-objs += dwc_otg_cfi.o
-+endif
-+
-+kernrelwd := $(subst ., ,$(KERNELRELEASE))
-+kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
-+
-+ifneq ($(kernrel3),2.6.20)
-+ccflags-y += $(CPPFLAGS)
-+endif
-+
-+else
-+
-+PWD := $(shell pwd)
-+PORTLIB := $(PWD)/../dwc_common_port
-+
-+# Command paths
-+CTAGS := $(CTAGS)
-+DOXYGEN := $(DOXYGEN)
-+
-+default: portlib
-+ $(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
-+
-+install: default
-+ $(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install
-+ $(MAKE) -C$(KDIR) M=$(PWD) modules_install
-+
-+portlib:
-+ $(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
-+ cp $(PORTLIB)/Module.symvers $(PWD)/
-+
-+docs: $(wildcard *.[hc]) doc/doxygen.cfg
-+ $(DOXYGEN) doc/doxygen.cfg
-+
-+tags: $(wildcard *.[hc])
-+ $(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
-+
-+
-+clean:
-+ rm -rf *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers
-+
-+endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg
-@@ -0,0 +1,224 @@
-+# Doxyfile 1.3.9.1
-+
-+#---------------------------------------------------------------------------
-+# Project related configuration options
-+#---------------------------------------------------------------------------
-+PROJECT_NAME = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver"
-+PROJECT_NUMBER = v3.00a
-+OUTPUT_DIRECTORY = ./doc/
-+CREATE_SUBDIRS = NO
-+OUTPUT_LANGUAGE = English
-+BRIEF_MEMBER_DESC = YES
-+REPEAT_BRIEF = YES
-+ABBREVIATE_BRIEF = "The $name class" \
-+ "The $name widget" \
-+ "The $name file" \
-+ is \
-+ provides \
-+ specifies \
-+ contains \
-+ represents \
-+ a \
-+ an \
-+ the
-+ALWAYS_DETAILED_SEC = NO
-+INLINE_INHERITED_MEMB = NO
-+FULL_PATH_NAMES = NO
-+STRIP_FROM_PATH =
-+STRIP_FROM_INC_PATH =
-+SHORT_NAMES = NO
-+JAVADOC_AUTOBRIEF = YES
-+MULTILINE_CPP_IS_BRIEF = NO
-+INHERIT_DOCS = YES
-+DISTRIBUTE_GROUP_DOC = NO
-+TAB_SIZE = 8
-+ALIASES =
-+OPTIMIZE_OUTPUT_FOR_C = YES
-+OPTIMIZE_OUTPUT_JAVA = NO
-+SUBGROUPING = YES
-+#---------------------------------------------------------------------------
-+# Build related configuration options
-+#---------------------------------------------------------------------------
-+EXTRACT_ALL = NO
-+EXTRACT_PRIVATE = YES
-+EXTRACT_STATIC = YES
-+EXTRACT_LOCAL_CLASSES = YES
-+EXTRACT_LOCAL_METHODS = NO
-+HIDE_UNDOC_MEMBERS = NO
-+HIDE_UNDOC_CLASSES = NO
-+HIDE_FRIEND_COMPOUNDS = NO
-+HIDE_IN_BODY_DOCS = NO
-+INTERNAL_DOCS = NO
-+CASE_SENSE_NAMES = NO
-+HIDE_SCOPE_NAMES = NO
-+SHOW_INCLUDE_FILES = YES
-+INLINE_INFO = YES
-+SORT_MEMBER_DOCS = NO
-+SORT_BRIEF_DOCS = NO
-+SORT_BY_SCOPE_NAME = NO
-+GENERATE_TODOLIST = YES
-+GENERATE_TESTLIST = YES
-+GENERATE_BUGLIST = YES
-+GENERATE_DEPRECATEDLIST= YES
-+ENABLED_SECTIONS =
-+MAX_INITIALIZER_LINES = 30
-+SHOW_USED_FILES = YES
-+SHOW_DIRECTORIES = YES
-+#---------------------------------------------------------------------------
-+# configuration options related to warning and progress messages
-+#---------------------------------------------------------------------------
-+QUIET = YES
-+WARNINGS = YES
-+WARN_IF_UNDOCUMENTED = NO
-+WARN_IF_DOC_ERROR = YES
-+WARN_FORMAT = "$file:$line: $text"
-+WARN_LOGFILE =
-+#---------------------------------------------------------------------------
-+# configuration options related to the input files
-+#---------------------------------------------------------------------------
-+INPUT = .
-+FILE_PATTERNS = *.c \
-+ *.h \
-+ ./linux/*.c \
-+ ./linux/*.h
-+RECURSIVE = NO
-+EXCLUDE = ./test/ \
-+ ./dwc_otg/.AppleDouble/
-+EXCLUDE_SYMLINKS = YES
-+EXCLUDE_PATTERNS = *.mod.*
-+EXAMPLE_PATH =
-+EXAMPLE_PATTERNS = *
-+EXAMPLE_RECURSIVE = NO
-+IMAGE_PATH =
-+INPUT_FILTER =
-+FILTER_PATTERNS =
-+FILTER_SOURCE_FILES = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to source browsing
-+#---------------------------------------------------------------------------
-+SOURCE_BROWSER = YES
-+INLINE_SOURCES = NO
-+STRIP_CODE_COMMENTS = YES
-+REFERENCED_BY_RELATION = NO
-+REFERENCES_RELATION = NO
-+VERBATIM_HEADERS = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the alphabetical class index
-+#---------------------------------------------------------------------------
-+ALPHABETICAL_INDEX = NO
-+COLS_IN_ALPHA_INDEX = 5
-+IGNORE_PREFIX =
-+#---------------------------------------------------------------------------
-+# configuration options related to the HTML output
-+#---------------------------------------------------------------------------
-+GENERATE_HTML = YES
-+HTML_OUTPUT = html
-+HTML_FILE_EXTENSION = .html
-+HTML_HEADER =
-+HTML_FOOTER =
-+HTML_STYLESHEET =
-+HTML_ALIGN_MEMBERS = YES
-+GENERATE_HTMLHELP = NO
-+CHM_FILE =
-+HHC_LOCATION =
-+GENERATE_CHI = NO
-+BINARY_TOC = NO
-+TOC_EXPAND = NO
-+DISABLE_INDEX = NO
-+ENUM_VALUES_PER_LINE = 4
-+GENERATE_TREEVIEW = YES
-+TREEVIEW_WIDTH = 250
-+#---------------------------------------------------------------------------
-+# configuration options related to the LaTeX output
-+#---------------------------------------------------------------------------
-+GENERATE_LATEX = NO
-+LATEX_OUTPUT = latex
-+LATEX_CMD_NAME = latex
-+MAKEINDEX_CMD_NAME = makeindex
-+COMPACT_LATEX = NO
-+PAPER_TYPE = a4wide
-+EXTRA_PACKAGES =
-+LATEX_HEADER =
-+PDF_HYPERLINKS = NO
-+USE_PDFLATEX = NO
-+LATEX_BATCHMODE = NO
-+LATEX_HIDE_INDICES = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the RTF output
-+#---------------------------------------------------------------------------
-+GENERATE_RTF = NO
-+RTF_OUTPUT = rtf
-+COMPACT_RTF = NO
-+RTF_HYPERLINKS = NO
-+RTF_STYLESHEET_FILE =
-+RTF_EXTENSIONS_FILE =
-+#---------------------------------------------------------------------------
-+# configuration options related to the man page output
-+#---------------------------------------------------------------------------
-+GENERATE_MAN = NO
-+MAN_OUTPUT = man
-+MAN_EXTENSION = .3
-+MAN_LINKS = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the XML output
-+#---------------------------------------------------------------------------
-+GENERATE_XML = NO
-+XML_OUTPUT = xml
-+XML_SCHEMA =
-+XML_DTD =
-+XML_PROGRAMLISTING = YES
-+#---------------------------------------------------------------------------
-+# configuration options for the AutoGen Definitions output
-+#---------------------------------------------------------------------------
-+GENERATE_AUTOGEN_DEF = NO
-+#---------------------------------------------------------------------------
-+# configuration options related to the Perl module output
-+#---------------------------------------------------------------------------
-+GENERATE_PERLMOD = NO
-+PERLMOD_LATEX = NO
-+PERLMOD_PRETTY = YES
-+PERLMOD_MAKEVAR_PREFIX =
-+#---------------------------------------------------------------------------
-+# Configuration options related to the preprocessor
-+#---------------------------------------------------------------------------
-+ENABLE_PREPROCESSING = YES
-+MACRO_EXPANSION = YES
-+EXPAND_ONLY_PREDEF = YES
-+SEARCH_INCLUDES = YES
-+INCLUDE_PATH =
-+INCLUDE_FILE_PATTERNS =
-+PREDEFINED = DEVICE_ATTR DWC_EN_ISOC
-+EXPAND_AS_DEFINED = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC
-+SKIP_FUNCTION_MACROS = NO
-+#---------------------------------------------------------------------------
-+# Configuration::additions related to external references
-+#---------------------------------------------------------------------------
-+TAGFILES =
-+GENERATE_TAGFILE =
-+ALLEXTERNALS = NO
-+EXTERNAL_GROUPS = YES
-+PERL_PATH = /usr/bin/perl
-+#---------------------------------------------------------------------------
-+# Configuration options related to the dot tool
-+#---------------------------------------------------------------------------
-+CLASS_DIAGRAMS = YES
-+HIDE_UNDOC_RELATIONS = YES
-+HAVE_DOT = NO
-+CLASS_GRAPH = YES
-+COLLABORATION_GRAPH = YES
-+UML_LOOK = NO
-+TEMPLATE_RELATIONS = NO
-+INCLUDE_GRAPH = YES
-+INCLUDED_BY_GRAPH = YES
-+CALL_GRAPH = NO
-+GRAPHICAL_HIERARCHY = YES
-+DOT_IMAGE_FORMAT = png
-+DOT_PATH =
-+DOTFILE_DIRS =
-+MAX_DOT_GRAPH_DEPTH = 1000
-+GENERATE_LEGEND = YES
-+DOT_CLEANUP = YES
-+#---------------------------------------------------------------------------
-+# Configuration::additions related to the search engine
-+#---------------------------------------------------------------------------
-+SEARCHENGINE = NO
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dummy_audio.c
-@@ -0,0 +1,1574 @@
-+/*
-+ * zero.c -- Gadget Zero, for USB development
-+ *
-+ * Copyright (C) 2003-2004 David Brownell
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ * 1. Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions, and the following disclaimer,
-+ * without modification.
-+ * 2. Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * 3. The names of the above-listed copyright holders may not be used
-+ * to endorse or promote products derived from this software without
-+ * specific prior written permission.
-+ *
-+ * ALTERNATIVELY, this software may be distributed under the terms of the
-+ * GNU General Public License ("GPL") as published by the Free Software
-+ * Foundation, either version 2 of that License or (at your option) any
-+ * later version.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
-+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+/*
-+ * Gadget Zero only needs two bulk endpoints, and is an example of how you
-+ * can write a hardware-agnostic gadget driver running inside a USB device.
-+ *
-+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
-+ * affect most of the driver.
-+ *
-+ * Use it with the Linux host/master side "usbtest" driver to get a basic
-+ * functional test of your device-side usb stack, or with "usb-skeleton".
-+ *
-+ * It supports two similar configurations. One sinks whatever the usb host
-+ * writes, and in return sources zeroes. The other loops whatever the host
-+ * writes back, so the host can read it. Module options include:
-+ *
-+ * buflen=N default N=4096, buffer size used
-+ * qlen=N default N=32, how many buffers in the loopback queue
-+ * loopdefault default false, list loopback config first
-+ *
-+ * Many drivers will only have one configuration, letting them be much
-+ * simpler if they also don't support high speed operation (like this
-+ * driver does).
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+#include <linux/ioport.h>
-+#include <linux/sched.h>
-+#include <linux/slab.h>
-+#include <linux/smp_lock.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/timer.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/uts.h>
-+#include <linux/version.h>
-+#include <linux/device.h>
-+#include <linux/moduleparam.h>
-+#include <linux/proc_fs.h>
-+
-+#include <asm/byteorder.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/system.h>
-+#include <asm/unaligned.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+#include <linux/usb_gadget.h>
-+
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
-+{
-+ int count = 0;
-+ u8 c;
-+ u16 uchar;
-+
-+ /* this insists on correct encodings, though not minimal ones.
-+ * BUT it currently rejects legit 4-byte UTF-8 code points,
-+ * which need surrogate pairs. (Unicode 3.1 can use them.)
-+ */
-+ while (len != 0 && (c = (u8) *s++) != 0) {
-+ if (unlikely(c & 0x80)) {
-+ // 2-byte sequence:
-+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
-+ if ((c & 0xe0) == 0xc0) {
-+ uchar = (c & 0x1f) << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ // 3-byte sequence (most CJKV characters):
-+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
-+ } else if ((c & 0xf0) == 0xe0) {
-+ uchar = (c & 0x0f) << 12;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c << 6;
-+
-+ c = (u8) *s++;
-+ if ((c & 0xc0) != 0xc0)
-+ goto fail;
-+ c &= 0x3f;
-+ uchar |= c;
-+
-+ /* no bogus surrogates */
-+ if (0xd800 <= uchar && uchar <= 0xdfff)
-+ goto fail;
-+
-+ // 4-byte sequence (surrogate pairs, currently rare):
-+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
-+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
-+ // (uuuuu = wwww + 1)
-+ // FIXME accept the surrogate code points (only)
-+
-+ } else
-+ goto fail;
-+ } else
-+ uchar = c;
-+ put_unaligned (cpu_to_le16 (uchar), cp++);
-+ count++;
-+ len--;
-+ }
-+ return count;
-+fail:
-+ return -1;
-+}
-+
-+
-+/**
-+ * usb_gadget_get_string - fill out a string descriptor
-+ * @table: of c strings encoded using UTF-8
-+ * @id: string id, from low byte of wValue in get string descriptor
-+ * @buf: at least 256 bytes
-+ *
-+ * Finds the UTF-8 string matching the ID, and converts it into a
-+ * string descriptor in utf16-le.
-+ * Returns length of descriptor (always even) or negative errno
-+ *
-+ * If your driver needs stings in multiple languages, you'll probably
-+ * "switch (wIndex) { ... }" in your ep0 string descriptor logic,
-+ * using this routine after choosing which set of UTF-8 strings to use.
-+ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
-+ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
-+ * characters (which are also widely used in C strings).
-+ */
-+int
-+usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
-+{
-+ struct usb_string *s;
-+ int len;
-+
-+ /* descriptor 0 has the language id */
-+ if (id == 0) {
-+ buf [0] = 4;
-+ buf [1] = USB_DT_STRING;
-+ buf [2] = (u8) table->language;
-+ buf [3] = (u8) (table->language >> 8);
-+ return 4;
-+ }
-+ for (s = table->strings; s && s->s; s++)
-+ if (s->id == id)
-+ break;
-+
-+ /* unrecognized: stall. */
-+ if (!s || !s->s)
-+ return -EINVAL;
-+
-+ /* string descriptors have length, tag, then UTF16-LE text */
-+ len = min ((size_t) 126, strlen (s->s));
-+ memset (buf + 2, 0, 2 * len); /* zero all the bytes */
-+ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
-+ if (len < 0)
-+ return -EINVAL;
-+ buf [0] = (len + 1) * 2;
-+ buf [1] = USB_DT_STRING;
-+ return buf [0];
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+/**
-+ * usb_descriptor_fillbuf - fill buffer with descriptors
-+ * @buf: Buffer to be filled
-+ * @buflen: Size of buf
-+ * @src: Array of descriptor pointers, terminated by null pointer.
-+ *
-+ * Copies descriptors into the buffer, returning the length or a
-+ * negative error code if they can't all be copied. Useful when
-+ * assembling descriptors for an associated set of interfaces used
-+ * as part of configuring a composite device; or in other cases where
-+ * sets of descriptors need to be marshaled.
-+ */
-+int
-+usb_descriptor_fillbuf(void *buf, unsigned buflen,
-+ const struct usb_descriptor_header **src)
-+{
-+ u8 *dest = buf;
-+
-+ if (!src)
-+ return -EINVAL;
-+
-+ /* fill buffer from src[] until null descriptor ptr */
-+ for (; 0 != *src; src++) {
-+ unsigned len = (*src)->bLength;
-+
-+ if (len > buflen)
-+ return -EINVAL;
-+ memcpy(dest, *src, len);
-+ buflen -= len;
-+ dest += len;
-+ }
-+ return dest - (u8 *)buf;
-+}
-+
-+
-+/**
-+ * usb_gadget_config_buf - builts a complete configuration descriptor
-+ * @config: Header for the descriptor, including characteristics such
-+ * as power requirements and number of interfaces.
-+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
-+ * endpoint, etc) defining all functions in this device configuration.
-+ * @buf: Buffer for the resulting configuration descriptor.
-+ * @length: Length of buffer. If this is not big enough to hold the
-+ * entire configuration descriptor, an error code will be returned.
-+ *
-+ * This copies descriptors into the response buffer, building a descriptor
-+ * for that configuration. It returns the buffer length or a negative
-+ * status code. The config.wTotalLength field is set to match the length
-+ * of the result, but other descriptor fields (including power usage and
-+ * interface count) must be set by the caller.
-+ *
-+ * Gadget drivers could use this when constructing a config descriptor
-+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
-+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
-+ */
-+int usb_gadget_config_buf(
-+ const struct usb_config_descriptor *config,
-+ void *buf,
-+ unsigned length,
-+ const struct usb_descriptor_header **desc
-+)
-+{
-+ struct usb_config_descriptor *cp = buf;
-+ int len;
-+
-+ /* config descriptor first */
-+ if (length < USB_DT_CONFIG_SIZE || !desc)
-+ return -EINVAL;
-+ *cp = *config;
-+
-+ /* then interface/endpoint/class/vendor/... */
-+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
-+ length - USB_DT_CONFIG_SIZE, desc);
-+ if (len < 0)
-+ return len;
-+ len += USB_DT_CONFIG_SIZE;
-+ if (len > 0xffff)
-+ return -EINVAL;
-+
-+ /* patch up the config descriptor */
-+ cp->bLength = USB_DT_CONFIG_SIZE;
-+ cp->bDescriptorType = USB_DT_CONFIG;
-+ cp->wTotalLength = cpu_to_le16(len);
-+ cp->bmAttributes |= USB_CONFIG_ATT_ONE;
-+ return len;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+/*-------------------------------------------------------------------------*/
-+
-+
-+#define RBUF_LEN (1024*1024)
-+static int rbuf_start;
-+static int rbuf_len;
-+static __u8 rbuf[RBUF_LEN];
-+
-+/*-------------------------------------------------------------------------*/
-+
-+#define DRIVER_VERSION "St Patrick's Day 2004"
-+
-+static const char shortname [] = "zero";
-+static const char longname [] = "YAMAHA YST-MS35D USB Speaker ";
-+
-+static const char source_sink [] = "source and sink data";
-+static const char loopback [] = "loop input to output";
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * driver assumes self-powered hardware, and
-+ * has no way for users to trigger remote wakeup.
-+ *
-+ * this version autoconfigures as much as possible,
-+ * which is reasonable for most "bulk-only" drivers.
-+ */
-+static const char *EP_IN_NAME; /* source */
-+static const char *EP_OUT_NAME; /* sink */
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* big enough to hold our biggest descriptor */
-+#define USB_BUFSIZ 512
-+
-+struct zero_dev {
-+ spinlock_t lock;
-+ struct usb_gadget *gadget;
-+ struct usb_request *req; /* for control responses */
-+
-+ /* when configured, we have one of two configs:
-+ * - source data (in to host) and sink it (out from host)
-+ * - or loop it back (out from host back in to host)
-+ */
-+ u8 config;
-+ struct usb_ep *in_ep, *out_ep;
-+
-+ /* autoresume timer */
-+ struct timer_list resume;
-+};
-+
-+#define xprintk(d,level,fmt,args...) \
-+ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
-+
-+#ifdef DEBUG
-+#define DBG(dev,fmt,args...) \
-+ xprintk(dev , KERN_DEBUG , fmt , ## args)
-+#else
-+#define DBG(dev,fmt,args...) \
-+ do { } while (0)
-+#endif /* DEBUG */
-+
-+#ifdef VERBOSE
-+#define VDBG DBG
-+#else
-+#define VDBG(dev,fmt,args...) \
-+ do { } while (0)
-+#endif /* VERBOSE */
-+
-+#define ERROR(dev,fmt,args...) \
-+ xprintk(dev , KERN_ERR , fmt , ## args)
-+#define WARN(dev,fmt,args...) \
-+ xprintk(dev , KERN_WARNING , fmt , ## args)
-+#define INFO(dev,fmt,args...) \
-+ xprintk(dev , KERN_INFO , fmt , ## args)
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static unsigned buflen = 4096;
-+static unsigned qlen = 32;
-+static unsigned pattern = 0;
-+
-+module_param (buflen, uint, S_IRUGO|S_IWUSR);
-+module_param (qlen, uint, S_IRUGO|S_IWUSR);
-+module_param (pattern, uint, S_IRUGO|S_IWUSR);
-+
-+/*
-+ * if it's nonzero, autoresume says how many seconds to wait
-+ * before trying to wake up the host after suspend.
-+ */
-+static unsigned autoresume = 0;
-+module_param (autoresume, uint, 0);
-+
-+/*
-+ * Normally the "loopback" configuration is second (index 1) so
-+ * it's not the default. Here's where to change that order, to
-+ * work better with hosts where config changes are problematic.
-+ * Or controllers (like superh) that only support one config.
-+ */
-+static int loopdefault = 0;
-+
-+module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* Thanks to NetChip Technologies for donating this product ID.
-+ *
-+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
-+ * Instead: allocate your own, using normal USB-IF procedures.
-+ */
-+#ifndef CONFIG_USB_ZERO_HNPTEST
-+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
-+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
-+#else
-+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
-+#define DRIVER_PRODUCT_NUM 0xbadd
-+#endif
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * DESCRIPTORS ... most are static, but strings and (full)
-+ * configuration descriptors are built on demand.
-+ */
-+
-+/*
-+#define STRING_MANUFACTURER 25
-+#define STRING_PRODUCT 42
-+#define STRING_SERIAL 101
-+*/
-+#define STRING_MANUFACTURER 1
-+#define STRING_PRODUCT 2
-+#define STRING_SERIAL 3
-+
-+#define STRING_SOURCE_SINK 250
-+#define STRING_LOOPBACK 251
-+
-+/*
-+ * This device advertises two configurations; these numbers work
-+ * on a pxa250 as well as more flexible hardware.
-+ */
-+#define CONFIG_SOURCE_SINK 3
-+#define CONFIG_LOOPBACK 2
-+
-+/*
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+
-+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
-+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-+
-+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
-+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
-+ .iManufacturer = STRING_MANUFACTURER,
-+ .iProduct = STRING_PRODUCT,
-+ .iSerialNumber = STRING_SERIAL,
-+ .bNumConfigurations = 2,
-+};
-+*/
-+static struct usb_device_descriptor
-+device_desc = {
-+ .bLength = sizeof device_desc,
-+ .bDescriptorType = USB_DT_DEVICE,
-+ .bcdUSB = __constant_cpu_to_le16 (0x0100),
-+ .bDeviceClass = USB_CLASS_PER_INTERFACE,
-+ .bDeviceSubClass = 0,
-+ .bDeviceProtocol = 0,
-+ .bMaxPacketSize0 = 64,
-+ .bcdDevice = __constant_cpu_to_le16 (0x0100),
-+ .idVendor = __constant_cpu_to_le16 (0x0499),
-+ .idProduct = __constant_cpu_to_le16 (0x3002),
-+ .iManufacturer = STRING_MANUFACTURER,
-+ .iProduct = STRING_PRODUCT,
-+ .iSerialNumber = STRING_SERIAL,
-+ .bNumConfigurations = 1,
-+};
-+
-+static struct usb_config_descriptor
-+z_config = {
-+ .bLength = sizeof z_config,
-+ .bDescriptorType = USB_DT_CONFIG,
-+
-+ /* compute wTotalLength on the fly */
-+ .bNumInterfaces = 2,
-+ .bConfigurationValue = 1,
-+ .iConfiguration = 0,
-+ .bmAttributes = 0x40,
-+ .bMaxPower = 0, /* self-powered */
-+};
-+
-+
-+static struct usb_otg_descriptor
-+otg_descriptor = {
-+ .bLength = sizeof otg_descriptor,
-+ .bDescriptorType = USB_DT_OTG,
-+
-+ .bmAttributes = USB_OTG_SRP,
-+};
-+
-+/* one interface in each configuration */
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+
-+/*
-+ * usb 2.0 devices need to expose both high speed and full speed
-+ * descriptors, unless they only run at full speed.
-+ *
-+ * that means alternate endpoint descriptors (bigger packets)
-+ * and a "device qualifier" ... plus more construction options
-+ * for the config descriptor.
-+ */
-+
-+static struct usb_qualifier_descriptor
-+dev_qualifier = {
-+ .bLength = sizeof dev_qualifier,
-+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
-+
-+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
-+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
-+
-+ .bNumConfigurations = 2,
-+};
-+
-+
-+struct usb_cs_as_general_descriptor {
-+ __u8 bLength;
-+ __u8 bDescriptorType;
-+
-+ __u8 bDescriptorSubType;
-+ __u8 bTerminalLink;
-+ __u8 bDelay;
-+ __u16 wFormatTag;
-+} __attribute__ ((packed));
-+
-+struct usb_cs_as_format_descriptor {
-+ __u8 bLength;
-+ __u8 bDescriptorType;
-+
-+ __u8 bDescriptorSubType;
-+ __u8 bFormatType;
-+ __u8 bNrChannels;
-+ __u8 bSubframeSize;
-+ __u8 bBitResolution;
-+ __u8 bSamfreqType;
-+ __u8 tLowerSamFreq[3];
-+ __u8 tUpperSamFreq[3];
-+} __attribute__ ((packed));
-+
-+static const struct usb_interface_descriptor
-+z_audio_control_if_desc = {
-+ .bLength = sizeof z_audio_control_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 0,
-+ .bAlternateSetting = 0,
-+ .bNumEndpoints = 0,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x1,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_interface_descriptor
-+z_audio_if_desc = {
-+ .bLength = sizeof z_audio_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 1,
-+ .bAlternateSetting = 0,
-+ .bNumEndpoints = 0,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x2,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_interface_descriptor
-+z_audio_if_desc2 = {
-+ .bLength = sizeof z_audio_if_desc,
-+ .bDescriptorType = USB_DT_INTERFACE,
-+ .bInterfaceNumber = 1,
-+ .bAlternateSetting = 1,
-+ .bNumEndpoints = 1,
-+ .bInterfaceClass = USB_CLASS_AUDIO,
-+ .bInterfaceSubClass = 0x2,
-+ .bInterfaceProtocol = 0,
-+ .iInterface = 0,
-+};
-+
-+static const struct usb_cs_as_general_descriptor
-+z_audio_cs_as_if_desc = {
-+ .bLength = 7,
-+ .bDescriptorType = 0x24,
-+
-+ .bDescriptorSubType = 0x01,
-+ .bTerminalLink = 0x01,
-+ .bDelay = 0x0,
-+ .wFormatTag = __constant_cpu_to_le16 (0x0001)
-+};
-+
-+
-+static const struct usb_cs_as_format_descriptor
-+z_audio_cs_as_format_desc = {
-+ .bLength = 0xe,
-+ .bDescriptorType = 0x24,
-+
-+ .bDescriptorSubType = 2,
-+ .bFormatType = 1,
-+ .bNrChannels = 1,
-+ .bSubframeSize = 1,
-+ .bBitResolution = 8,
-+ .bSamfreqType = 0,
-+ .tLowerSamFreq = {0x7e, 0x13, 0x00},
-+ .tUpperSamFreq = {0xe2, 0xd6, 0x00},
-+};
-+
-+static const struct usb_endpoint_descriptor
-+z_iso_ep = {
-+ .bLength = 0x09,
-+ .bDescriptorType = 0x05,
-+ .bEndpointAddress = 0x04,
-+ .bmAttributes = 0x09,
-+ .wMaxPacketSize = 0x0038,
-+ .bInterval = 0x01,
-+ .bRefresh = 0x00,
-+ .bSynchAddress = 0x00,
-+};
-+
-+static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+// 9 bytes
-+static char z_ac_interface_header_desc[] =
-+{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
-+
-+// 12 bytes
-+static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
-+ 0x03, 0x00, 0x00, 0x00};
-+// 13 bytes
-+static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
-+ 0x02, 0x00, 0x02, 0x00, 0x00};
-+// 9 bytes
-+static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
-+ 0x00};
-+
-+static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
-+ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
-+ 0x00};
-+
-+static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
-+
-+static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
-+ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
-+
-+static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
-+ 0x00};
-+
-+static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
-+
-+
-+
-+static const struct usb_descriptor_header *z_function [] = {
-+ (struct usb_descriptor_header *) &z_audio_control_if_desc,
-+ (struct usb_descriptor_header *) &z_ac_interface_header_desc,
-+ (struct usb_descriptor_header *) &z_0,
-+ (struct usb_descriptor_header *) &z_1,
-+ (struct usb_descriptor_header *) &z_2,
-+ (struct usb_descriptor_header *) &z_audio_if_desc,
-+ (struct usb_descriptor_header *) &z_audio_if_desc2,
-+ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
-+ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
-+ (struct usb_descriptor_header *) &z_iso_ep,
-+ (struct usb_descriptor_header *) &z_iso_ep2,
-+ (struct usb_descriptor_header *) &za_0,
-+ (struct usb_descriptor_header *) &za_1,
-+ (struct usb_descriptor_header *) &za_2,
-+ (struct usb_descriptor_header *) &za_3,
-+ (struct usb_descriptor_header *) &za_4,
-+ (struct usb_descriptor_header *) &za_5,
-+ (struct usb_descriptor_header *) &za_6,
-+ (struct usb_descriptor_header *) &za_7,
-+ (struct usb_descriptor_header *) &za_8,
-+ (struct usb_descriptor_header *) &za_9,
-+ (struct usb_descriptor_header *) &za_10,
-+ (struct usb_descriptor_header *) &za_11,
-+ (struct usb_descriptor_header *) &za_12,
-+ (struct usb_descriptor_header *) &za_13,
-+ (struct usb_descriptor_header *) &za_14,
-+ (struct usb_descriptor_header *) &za_15,
-+ (struct usb_descriptor_header *) &za_16,
-+ (struct usb_descriptor_header *) &za_17,
-+ (struct usb_descriptor_header *) &za_18,
-+ (struct usb_descriptor_header *) &za_19,
-+ (struct usb_descriptor_header *) &za_20,
-+ (struct usb_descriptor_header *) &za_21,
-+ (struct usb_descriptor_header *) &za_22,
-+ (struct usb_descriptor_header *) &za_23,
-+ (struct usb_descriptor_header *) &za_24,
-+ NULL,
-+};
-+
-+/* maxpacket and other transfer characteristics vary by speed. */
-+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
-+
-+#else
-+
-+/* if there's no high speed support, maxpacket doesn't change. */
-+#define ep_desc(g,hs,fs) fs
-+
-+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
-+
-+static char manufacturer [40];
-+//static char serial [40];
-+static char serial [] = "Ser 00 em";
-+
-+/* static strings, in UTF-8 */
-+static struct usb_string strings [] = {
-+ { STRING_MANUFACTURER, manufacturer, },
-+ { STRING_PRODUCT, longname, },
-+ { STRING_SERIAL, serial, },
-+ { STRING_LOOPBACK, loopback, },
-+ { STRING_SOURCE_SINK, source_sink, },
-+ { } /* end of list */
-+};
-+
-+static struct usb_gadget_strings stringtab = {
-+ .language = 0x0409, /* en-us */
-+ .strings = strings,
-+};
-+
-+/*
-+ * config descriptors are also handcrafted. these must agree with code
-+ * that sets configurations, and with code managing interfaces and their
-+ * altsettings. other complexity may come from:
-+ *
-+ * - high speed support, including "other speed config" rules
-+ * - multiple configurations
-+ * - interfaces with alternate settings
-+ * - embedded class or vendor-specific descriptors
-+ *
-+ * this handles high speed, and has a second config that could as easily
-+ * have been an alternate interface setting (on most hardware).
-+ *
-+ * NOTE: to demonstrate (and test) more USB capabilities, this driver
-+ * should include an altsetting to test interrupt transfers, including
-+ * high bandwidth modes at high speed. (Maybe work like Intel's test
-+ * device?)
-+ */
-+static int
-+config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
-+{
-+ int len;
-+ const struct usb_descriptor_header **function;
-+
-+ function = z_function;
-+ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
-+ if (len < 0)
-+ return len;
-+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
-+ return len;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_request *
-+alloc_ep_req (struct usb_ep *ep, unsigned length)
-+{
-+ struct usb_request *req;
-+
-+ req = usb_ep_alloc_request (ep, GFP_ATOMIC);
-+ if (req) {
-+ req->length = length;
-+ req->buf = usb_ep_alloc_buffer (ep, length,
-+ &req->dma, GFP_ATOMIC);
-+ if (!req->buf) {
-+ usb_ep_free_request (ep, req);
-+ req = NULL;
-+ }
-+ }
-+ return req;
-+}
-+
-+static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
-+{
-+ if (req->buf)
-+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
-+ usb_ep_free_request (ep, req);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/* optionally require specific source/sink data patterns */
-+
-+static int
-+check_read_data (
-+ struct zero_dev *dev,
-+ struct usb_ep *ep,
-+ struct usb_request *req
-+)
-+{
-+ unsigned i;
-+ u8 *buf = req->buf;
-+
-+ for (i = 0; i < req->actual; i++, buf++) {
-+ switch (pattern) {
-+ /* all-zeroes has no synchronization issues */
-+ case 0:
-+ if (*buf == 0)
-+ continue;
-+ break;
-+ /* mod63 stays in sync with short-terminated transfers,
-+ * or otherwise when host and gadget agree on how large
-+ * each usb transfer request should be. resync is done
-+ * with set_interface or set_config.
-+ */
-+ case 1:
-+ if (*buf == (u8)(i % 63))
-+ continue;
-+ break;
-+ }
-+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
-+ usb_ep_set_halt (ep);
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void zero_reset_config (struct zero_dev *dev)
-+{
-+ if (dev->config == 0)
-+ return;
-+
-+ DBG (dev, "reset config\n");
-+
-+ /* just disable endpoints, forcing completion of pending i/o.
-+ * all our completion handlers free their requests in this case.
-+ */
-+ if (dev->in_ep) {
-+ usb_ep_disable (dev->in_ep);
-+ dev->in_ep = NULL;
-+ }
-+ if (dev->out_ep) {
-+ usb_ep_disable (dev->out_ep);
-+ dev->out_ep = NULL;
-+ }
-+ dev->config = 0;
-+ del_timer (&dev->resume);
-+}
-+
-+#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
-+
-+static void
-+zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
-+{
-+ struct zero_dev *dev = ep->driver_data;
-+ int status = req->status;
-+ int i, j;
-+
-+ switch (status) {
-+
-+ case 0: /* normal completion? */
-+ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
-+ for (i=0, j=rbuf_start; i<req->actual; i++) {
-+ //printk ("%02x ", ((__u8*)req->buf)[i]);
-+ rbuf[j] = ((__u8*)req->buf)[i];
-+ j++;
-+ if (j >= RBUF_LEN) j=0;
-+ }
-+ rbuf_start = j;
-+ //printk ("\n\n");
-+
-+ if (rbuf_len < RBUF_LEN) {
-+ rbuf_len += req->actual;
-+ if (rbuf_len > RBUF_LEN) {
-+ rbuf_len = RBUF_LEN;
-+ }
-+ }
-+
-+ break;
-+
-+ /* this endpoint is normally active while we're configured */
-+ case -ECONNABORTED: /* hardware forced ep reset */
-+ case -ECONNRESET: /* request dequeued */
-+ case -ESHUTDOWN: /* disconnect from host */
-+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
-+ req->actual, req->length);
-+ if (ep == dev->out_ep)
-+ check_read_data (dev, ep, req);
-+ free_ep_req (ep, req);
-+ return;
-+
-+ case -EOVERFLOW: /* buffer overrun on read means that
-+ * we didn't provide a big enough
-+ * buffer.
-+ */
-+ default:
-+#if 1
-+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
-+ status, req->actual, req->length);
-+#endif
-+ case -EREMOTEIO: /* short read */
-+ break;
-+ }
-+
-+ status = usb_ep_queue (ep, req, GFP_ATOMIC);
-+ if (status) {
-+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
-+ ep->name, req->length, status);
-+ usb_ep_set_halt (ep);
-+ /* FIXME recover later ... somehow */
-+ }
-+}
-+
-+static struct usb_request *
-+zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
-+{
-+ struct usb_request *req;
-+ int status;
-+
-+ req = alloc_ep_req (ep, 512);
-+ if (!req)
-+ return NULL;
-+
-+ req->complete = zero_isoc_complete;
-+
-+ status = usb_ep_queue (ep, req, gfp_flags);
-+ if (status) {
-+ struct zero_dev *dev = ep->driver_data;
-+
-+ ERROR (dev, "start %s --> %d\n", ep->name, status);
-+ free_ep_req (ep, req);
-+ req = NULL;
-+ }
-+
-+ return req;
-+}
-+
-+/* change our operational config. this code must agree with the code
-+ * that returns config descriptors, and altsetting code.
-+ *
-+ * it's also responsible for power management interactions. some
-+ * configurations might not work with our current power sources.
-+ *
-+ * note that some device controller hardware will constrain what this
-+ * code can do, perhaps by disallowing more than one configuration or
-+ * by limiting configuration choices (like the pxa2xx).
-+ */
-+static int
-+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
-+{
-+ int result = 0;
-+ struct usb_gadget *gadget = dev->gadget;
-+ const struct usb_endpoint_descriptor *d;
-+ struct usb_ep *ep;
-+
-+ if (number == dev->config)
-+ return 0;
-+
-+ zero_reset_config (dev);
-+
-+ gadget_for_each_ep (ep, gadget) {
-+
-+ if (strcmp (ep->name, "ep4") == 0) {
-+
-+ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
-+ result = usb_ep_enable (ep, d);
-+
-+ if (result == 0) {
-+ ep->driver_data = dev;
-+ dev->in_ep = ep;
-+
-+ if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
-+
-+ dev->in_ep = ep;
-+ continue;
-+ }
-+
-+ usb_ep_disable (ep);
-+ result = -EIO;
-+ }
-+ }
-+
-+ }
-+
-+ dev->config = number;
-+ return result;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
-+{
-+ if (req->status || req->actual != req->length)
-+ DBG ((struct zero_dev *) ep->driver_data,
-+ "setup complete --> %d, %d/%d\n",
-+ req->status, req->actual, req->length);
-+}
-+
-+/*
-+ * The setup() callback implements all the ep0 functionality that's
-+ * not handled lower down, in hardware or the hardware driver (like
-+ * device and endpoint feature flags, and their status). It's all
-+ * housekeeping for the gadget function we're implementing. Most of
-+ * the work is in config-specific setup.
-+ */
-+static int
-+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+ struct usb_request *req = dev->req;
-+ int value = -EOPNOTSUPP;
-+
-+ /* usually this stores reply data in the pre-allocated ep0 buffer,
-+ * but config change events will reconfigure hardware.
-+ */
-+ req->zero = 0;
-+ switch (ctrl->bRequest) {
-+
-+ case USB_REQ_GET_DESCRIPTOR:
-+
-+ switch (ctrl->wValue >> 8) {
-+
-+ case USB_DT_DEVICE:
-+ value = min (ctrl->wLength, (u16) sizeof device_desc);
-+ memcpy (req->buf, &device_desc, value);
-+ break;
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ case USB_DT_DEVICE_QUALIFIER:
-+ if (!gadget->is_dualspeed)
-+ break;
-+ value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
-+ memcpy (req->buf, &dev_qualifier, value);
-+ break;
-+
-+ case USB_DT_OTHER_SPEED_CONFIG:
-+ if (!gadget->is_dualspeed)
-+ break;
-+ // FALLTHROUGH
-+#endif /* CONFIG_USB_GADGET_DUALSPEED */
-+ case USB_DT_CONFIG:
-+ value = config_buf (gadget, req->buf,
-+ ctrl->wValue >> 8,
-+ ctrl->wValue & 0xff);
-+ if (value >= 0)
-+ value = min (ctrl->wLength, (u16) value);
-+ break;
-+
-+ case USB_DT_STRING:
-+ /* wIndex == language code.
-+ * this driver only handles one language, you can
-+ * add string tables for other languages, using
-+ * any UTF-8 characters
-+ */
-+ value = usb_gadget_get_string (&stringtab,
-+ ctrl->wValue & 0xff, req->buf);
-+ if (value >= 0) {
-+ value = min (ctrl->wLength, (u16) value);
-+ }
-+ break;
-+ }
-+ break;
-+
-+ /* currently two configs, two speeds */
-+ case USB_REQ_SET_CONFIGURATION:
-+ if (ctrl->bRequestType != 0)
-+ goto unknown;
-+
-+ spin_lock (&dev->lock);
-+ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
-+ spin_unlock (&dev->lock);
-+ break;
-+ case USB_REQ_GET_CONFIGURATION:
-+ if (ctrl->bRequestType != USB_DIR_IN)
-+ goto unknown;
-+ *(u8 *)req->buf = dev->config;
-+ value = min (ctrl->wLength, (u16) 1);
-+ break;
-+
-+ /* until we add altsetting support, or other interfaces,
-+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
-+ * and already killed pending endpoint I/O.
-+ */
-+ case USB_REQ_SET_INTERFACE:
-+
-+ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
-+ goto unknown;
-+ spin_lock (&dev->lock);
-+ if (dev->config) {
-+ u8 config = dev->config;
-+
-+ /* resets interface configuration, forgets about
-+ * previous transaction state (queued bufs, etc)
-+ * and re-inits endpoint state (toggle etc)
-+ * no response queued, just zero status == success.
-+ * if we had more than one interface we couldn't
-+ * use this "reset the config" shortcut.
-+ */
-+ zero_reset_config (dev);
-+ zero_set_config (dev, config, GFP_ATOMIC);
-+ value = 0;
-+ }
-+ spin_unlock (&dev->lock);
-+ break;
-+ case USB_REQ_GET_INTERFACE:
-+ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
-+ value = ctrl->wLength;
-+ break;
-+ }
-+ else {
-+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
-+ goto unknown;
-+ if (!dev->config)
-+ break;
-+ if (ctrl->wIndex != 0) {
-+ value = -EDOM;
-+ break;
-+ }
-+ *(u8 *)req->buf = 0;
-+ value = min (ctrl->wLength, (u16) 1);
-+ }
-+ break;
-+
-+ /*
-+ * These are the same vendor-specific requests supported by
-+ * Intel's USB 2.0 compliance test devices. We exceed that
-+ * device spec by allowing multiple-packet requests.
-+ */
-+ case 0x5b: /* control WRITE test -- fill the buffer */
-+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
-+ goto unknown;
-+ if (ctrl->wValue || ctrl->wIndex)
-+ break;
-+ /* just read that many bytes into the buffer */
-+ if (ctrl->wLength > USB_BUFSIZ)
-+ break;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x5c: /* control READ test -- return the buffer */
-+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
-+ goto unknown;
-+ if (ctrl->wValue || ctrl->wIndex)
-+ break;
-+ /* expect those bytes are still in the buffer; send back */
-+ if (ctrl->wLength > USB_BUFSIZ
-+ || ctrl->wLength != req->length)
-+ break;
-+ value = ctrl->wLength;
-+ break;
-+
-+ case 0x01: // SET_CUR
-+ case 0x02:
-+ case 0x03:
-+ case 0x04:
-+ case 0x05:
-+ value = ctrl->wLength;
-+ break;
-+ case 0x81:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0xe3;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x00;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x81;
-+ //((u8*)req->buf)[1] = 0x81;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x82:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0xc3;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x00;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x82;
-+ //((u8*)req->buf)[1] = 0x82;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x83:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0x00;
-+ break;
-+ case 0x0300:
-+ ((u8*)req->buf)[0] = 0x60;
-+ break;
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x18;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x83;
-+ //((u8*)req->buf)[1] = 0x83;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x84:
-+ switch (ctrl->wValue) {
-+ case 0x0201:
-+ case 0x0202:
-+ ((u8*)req->buf)[0] = 0x00;
-+ ((u8*)req->buf)[1] = 0x01;
-+ break;
-+ case 0x0300:
-+ case 0x0500:
-+ ((u8*)req->buf)[0] = 0x08;
-+ break;
-+ }
-+ //((u8*)req->buf)[0] = 0x84;
-+ //((u8*)req->buf)[1] = 0x84;
-+ value = ctrl->wLength;
-+ break;
-+ case 0x85:
-+ ((u8*)req->buf)[0] = 0x85;
-+ ((u8*)req->buf)[1] = 0x85;
-+ value = ctrl->wLength;
-+ break;
-+
-+
-+ default:
-+unknown:
-+ printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
-+ ctrl->bRequestType, ctrl->bRequest,
-+ ctrl->wValue, ctrl->wIndex, ctrl->wLength);
-+ }
-+
-+ /* respond with data transfer before status phase? */
-+ if (value >= 0) {
-+ req->length = value;
-+ req->zero = value < ctrl->wLength
-+ && (value % gadget->ep0->maxpacket) == 0;
-+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
-+ if (value < 0) {
-+ DBG (dev, "ep_queue < 0 --> %d\n", value);
-+ req->status = 0;
-+ zero_setup_complete (gadget->ep0, req);
-+ }
-+ }
-+
-+ /* device either stalls (value < 0) or reports success */
-+ return value;
-+}
-+
-+static void
-+zero_disconnect (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave (&dev->lock, flags);
-+ zero_reset_config (dev);
-+
-+ /* a more significant application might have some non-usb
-+ * activities to quiesce here, saving resources like power
-+ * or pushing the notification up a network stack.
-+ */
-+ spin_unlock_irqrestore (&dev->lock, flags);
-+
-+ /* next we may get setup() calls to enumerate new connections;
-+ * or an unbind() during shutdown (including removing module).
-+ */
-+}
-+
-+static void
-+zero_autoresume (unsigned long _dev)
-+{
-+ struct zero_dev *dev = (struct zero_dev *) _dev;
-+ int status;
-+
-+ /* normally the host would be woken up for something
-+ * more significant than just a timer firing...
-+ */
-+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
-+ status = usb_gadget_wakeup (dev->gadget);
-+ DBG (dev, "wakeup --> %d\n", status);
-+ }
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void
-+zero_unbind (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ DBG (dev, "unbind\n");
-+
-+ /* we've already been disconnected ... no i/o is active */
-+ if (dev->req)
-+ free_ep_req (gadget->ep0, dev->req);
-+ del_timer_sync (&dev->resume);
-+ kfree (dev);
-+ set_gadget_data (gadget, NULL);
-+}
-+
-+static int
-+zero_bind (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev;
-+ //struct usb_ep *ep;
-+
-+ printk("binding\n");
-+ /*
-+ * DRIVER POLICY CHOICE: you may want to do this differently.
-+ * One thing to avoid is reusing a bcdDevice revision code
-+ * with different host-visible configurations or behavior
-+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
-+ */
-+ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
-+
-+
-+ /* ok, we made sense of the hardware ... */
-+ dev = kzalloc (sizeof *dev, SLAB_KERNEL);
-+ if (!dev)
-+ return -ENOMEM;
-+ spin_lock_init (&dev->lock);
-+ dev->gadget = gadget;
-+ set_gadget_data (gadget, dev);
-+
-+ /* preallocate control response and buffer */
-+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
-+ if (!dev->req)
-+ goto enomem;
-+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
-+ &dev->req->dma, GFP_KERNEL);
-+ if (!dev->req->buf)
-+ goto enomem;
-+
-+ dev->req->complete = zero_setup_complete;
-+
-+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
-+
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ /* assume ep0 uses the same value for both speeds ... */
-+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
-+
-+ /* and that all endpoints are dual-speed */
-+ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
-+ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
-+#endif
-+
-+ usb_gadget_set_selfpowered (gadget);
-+
-+ init_timer (&dev->resume);
-+ dev->resume.function = zero_autoresume;
-+ dev->resume.data = (unsigned long) dev;
-+
-+ gadget->ep0->driver_data = dev;
-+
-+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
-+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
-+ EP_OUT_NAME, EP_IN_NAME);
-+
-+ snprintf (manufacturer, sizeof manufacturer,
-+ UTS_SYSNAME " " UTS_RELEASE " with %s",
-+ gadget->name);
-+
-+ return 0;
-+
-+enomem:
-+ zero_unbind (gadget);
-+ return -ENOMEM;
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static void
-+zero_suspend (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ if (gadget->speed == USB_SPEED_UNKNOWN)
-+ return;
-+
-+ if (autoresume) {
-+ mod_timer (&dev->resume, jiffies + (HZ * autoresume));
-+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
-+ } else
-+ DBG (dev, "suspend\n");
-+}
-+
-+static void
-+zero_resume (struct usb_gadget *gadget)
-+{
-+ struct zero_dev *dev = get_gadget_data (gadget);
-+
-+ DBG (dev, "resume\n");
-+ del_timer (&dev->resume);
-+}
-+
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static struct usb_gadget_driver zero_driver = {
-+#ifdef CONFIG_USB_GADGET_DUALSPEED
-+ .speed = USB_SPEED_HIGH,
-+#else
-+ .speed = USB_SPEED_FULL,
-+#endif
-+ .function = (char *) longname,
-+ .bind = zero_bind,
-+ .unbind = zero_unbind,
-+
-+ .setup = zero_setup,
-+ .disconnect = zero_disconnect,
-+
-+ .suspend = zero_suspend,
-+ .resume = zero_resume,
-+
-+ .driver = {
-+ .name = (char *) shortname,
-+ // .shutdown = ...
-+ // .suspend = ...
-+ // .resume = ...
-+ },
-+};
-+
-+MODULE_AUTHOR ("David Brownell");
-+MODULE_LICENSE ("Dual BSD/GPL");
-+
-+static struct proc_dir_entry *pdir, *pfile;
-+
-+static int isoc_read_data (char *page, char **start,
-+ off_t off, int count,
-+ int *eof, void *data)
-+{
-+ int i;
-+ static int c = 0;
-+ static int done = 0;
-+ static int s = 0;
-+
-+/*
-+ printk ("\ncount: %d\n", count);
-+ printk ("rbuf_start: %d\n", rbuf_start);
-+ printk ("rbuf_len: %d\n", rbuf_len);
-+ printk ("off: %d\n", off);
-+ printk ("start: %p\n\n", *start);
-+*/
-+ if (done) {
-+ c = 0;
-+ done = 0;
-+ *eof = 1;
-+ return 0;
-+ }
-+
-+ if (c == 0) {
-+ if (rbuf_len == RBUF_LEN)
-+ s = rbuf_start;
-+ else s = 0;
-+ }
-+
-+ for (i=0; i<count && c<rbuf_len; i++, c++) {
-+ page[i] = rbuf[(c+s) % RBUF_LEN];
-+ }
-+ *start = page;
-+
-+ if (c >= rbuf_len) {
-+ *eof = 1;
-+ done = 1;
-+ }
-+
-+
-+ return i;
-+}
-+
-+static int __init init (void)
-+{
-+
-+ int retval = 0;
-+
-+ pdir = proc_mkdir("isoc_test", NULL);
-+ if(pdir == NULL) {
-+ retval = -ENOMEM;
-+ printk("Error creating dir\n");
-+ goto done;
-+ }
-+ pdir->owner = THIS_MODULE;
-+
-+ pfile = create_proc_read_entry("isoc_data",
-+ 0444, pdir,
-+ isoc_read_data,
-+ NULL);
-+ if (pfile == NULL) {
-+ retval = -ENOMEM;
-+ printk("Error creating file\n");
-+ goto no_file;
-+ }
-+ pfile->owner = THIS_MODULE;
-+
-+ return usb_gadget_register_driver (&zero_driver);
-+
-+ no_file:
-+ remove_proc_entry("isoc_data", NULL);
-+ done:
-+ return retval;
-+}
-+module_init (init);
-+
-+static void __exit cleanup (void)
-+{
-+
-+ usb_gadget_unregister_driver (&zero_driver);
-+
-+ remove_proc_entry("isoc_data", pdir);
-+ remove_proc_entry("isoc_test", NULL);
-+}
-+module_exit (cleanup);
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h
-@@ -0,0 +1,142 @@
-+/* ==========================================================================
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_CFI_COMMON_H__)
-+#define __DWC_CFI_COMMON_H__
-+
-+//#include <linux/types.h>
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the CFI specific common constants, interfaces
-+ * (functions and macros) and structures for Linux. No PCD specific
-+ * data structure or definition is to be included in this file.
-+ *
-+ */
-+
-+/** This is a request for all Core Features */
-+#define VEN_CORE_GET_FEATURES 0xB1
-+
-+/** This is a request to get the value of a specific Core Feature */
-+#define VEN_CORE_GET_FEATURE 0xB2
-+
-+/** This command allows the host to set the value of a specific Core Feature */
-+#define VEN_CORE_SET_FEATURE 0xB3
-+
-+/** This command allows the host to set the default values of
-+ * either all or any specific Core Feature
-+ */
-+#define VEN_CORE_RESET_FEATURES 0xB4
-+
-+/** This command forces the PCD to write the deferred values of a Core Features */
-+#define VEN_CORE_ACTIVATE_FEATURES 0xB5
-+
-+/** This request reads a DWORD value from a register at the specified offset */
-+#define VEN_CORE_READ_REGISTER 0xB6
-+
-+/** This request writes a DWORD value into a register at the specified offset */
-+#define VEN_CORE_WRITE_REGISTER 0xB7
-+
-+/** This structure is the header of the Core Features dataset returned to
-+ * the Host
-+ */
-+struct cfi_all_features_header {
-+/** The features header structure length is */
-+#define CFI_ALL_FEATURES_HDR_LEN 8
-+ /**
-+ * The total length of the features dataset returned to the Host
-+ */
-+ uint16_t wTotalLen;
-+
-+ /**
-+ * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H).
-+ * This field identifies the version of the CFI Specification with which
-+ * the device is compliant.
-+ */
-+ uint16_t wVersion;
-+
-+ /** The ID of the Core */
-+ uint16_t wCoreID;
-+#define CFI_CORE_ID_UDC 1
-+#define CFI_CORE_ID_OTG 2
-+#define CFI_CORE_ID_WUDEV 3
-+
-+ /** Number of features returned by VEN_CORE_GET_FEATURES request */
-+ uint16_t wNumFeatures;
-+} UPACKED;
-+
-+typedef struct cfi_all_features_header cfi_all_features_header_t;
-+
-+/** This structure is a header of the Core Feature descriptor dataset returned to
-+ * the Host after the VEN_CORE_GET_FEATURES request
-+ */
-+struct cfi_feature_desc_header {
-+#define CFI_FEATURE_DESC_HDR_LEN 8
-+
-+ /** The feature ID */
-+ uint16_t wFeatureID;
-+
-+ /** Length of this feature descriptor in bytes - including the
-+ * length of the feature name string
-+ */
-+ uint16_t wLength;
-+
-+ /** The data length of this feature in bytes */
-+ uint16_t wDataLength;
-+
-+ /**
-+ * Attributes of this features
-+ * D0: Access rights
-+ * 0 - Read/Write
-+ * 1 - Read only
-+ */
-+ uint8_t bmAttributes;
-+#define CFI_FEATURE_ATTR_RO 1
-+#define CFI_FEATURE_ATTR_RW 0
-+
-+ /** Length of the feature name in bytes */
-+ uint8_t bNameLen;
-+
-+ /** The feature name buffer */
-+ //uint8_t *name;
-+} UPACKED;
-+
-+typedef struct cfi_feature_desc_header cfi_feature_desc_header_t;
-+
-+/**
-+ * This structure describes a NULL terminated string referenced by its id field.
-+ * It is very similar to usb_string structure but has the id field type set to 16-bit.
-+ */
-+struct cfi_string {
-+ uint16_t id;
-+ const uint8_t *s;
-+};
-+typedef struct cfi_string cfi_string_t;
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c
-@@ -0,0 +1,854 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $
-+ * $Revision: #12 $
-+ * $Date: 2011/10/26 $
-+ * $Change: 1873028 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#include "dwc_os.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_adp.h"
-+
-+/** @file
-+ *
-+ * This file contains the most of the Attach Detect Protocol implementation for
-+ * the driver to support OTG Rev2.0.
-+ *
-+ */
-+
-+void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value)
-+{
-+ adpctl_data_t adpctl;
-+
-+ adpctl.d32 = value;
-+ adpctl.b.ar = 0x2;
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
-+
-+ while (adpctl.b.ar) {
-+ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
-+ }
-+
-+}
-+
-+/**
-+ * Function is called to read ADP registers
-+ */
-+uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if)
-+{
-+ adpctl_data_t adpctl;
-+
-+ adpctl.d32 = 0;
-+ adpctl.b.ar = 0x1;
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
-+
-+ while (adpctl.b.ar) {
-+ adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
-+ }
-+
-+ return adpctl.d32;
-+}
-+
-+/**
-+ * Function is called to read ADPCTL register and filter Write-clear bits
-+ */
-+uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if)
-+{
-+ adpctl_data_t adpctl;
-+
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ adpctl.b.adp_tmout_int = 0;
-+ adpctl.b.adp_prb_int = 0;
-+ adpctl.b.adp_tmout_int = 0;
-+
-+ return adpctl.d32;
-+}
-+
-+/**
-+ * Function is called to write ADP registers
-+ */
-+void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr,
-+ uint32_t set)
-+{
-+ dwc_otg_adp_write_reg(core_if,
-+ (dwc_otg_adp_read_reg(core_if) & (~clr)) | set);
-+}
-+
-+static void adp_sense_timeout(void *ptr)
-+{
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
-+ core_if->adp.sense_timer_started = 0;
-+ DWC_PRINTF("ADP SENSE TIMEOUT\n");
-+ if (core_if->adp_enable) {
-+ dwc_otg_adp_sense_stop(core_if);
-+ dwc_otg_adp_probe_start(core_if);
-+ }
-+}
-+
-+/**
-+ * This function is called when the ADP vbus timer expires. Timeout is 1.1s.
-+ */
-+static void adp_vbuson_timeout(void *ptr)
-+{
-+ gpwrdn_data_t gpwrdn;
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__);
-+ if (core_if) {
-+ core_if->adp.vbuson_timer_started = 0;
-+ /* Turn off vbus */
-+ hprt0.b.prtpwr = 1;
-+ DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0);
-+ gpwrdn.d32 = 0;
-+
-+ /* Power off the core */
-+ if (core_if->power_down == 2) {
-+ /* Enable Wakeup Logic */
-+// gpwrdn.b.wkupactiv = 1;
-+ gpwrdn.b.pmuactv = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
-+ gpwrdn.d32);
-+
-+ /* Suspend the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
-+
-+ /* Switch on VDD */
-+// gpwrdn.b.wkupactiv = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
-+ gpwrdn.d32);
-+ } else {
-+ /* Enable Power Down Logic */
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ }
-+
-+ /* Power off the core */
-+ if (core_if->power_down == 2) {
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn,
-+ gpwrdn.d32, 0);
-+ }
-+
-+ /* Unmask SRP detected interrupt from Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.srp_det_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+
-+ dwc_otg_adp_probe_start(core_if);
-+ dwc_otg_dump_global_registers(core_if);
-+ dwc_otg_dump_host_registers(core_if);
-+ }
-+
-+}
-+
-+/**
-+ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is
-+ * not asserted within 1.1 seconds.
-+ *
-+ * @param core_if the pointer to core_if strucure.
-+ */
-+void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if)
-+{
-+ core_if->adp.vbuson_timer_started = 1;
-+ if (core_if->adp.vbuson_timer)
-+ {
-+ DWC_PRINTF("SCHEDULING VBUSON TIMER\n");
-+ /* 1.1 secs + 60ms necessary for cil_hcd_start*/
-+ DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160);
-+ } else {
-+ DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer);
-+ }
-+}
-+
-+#if 0
-+/**
-+ * Masks all DWC OTG core interrupts
-+ *
-+ */
-+static void mask_all_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ int i;
-+ gahbcfg_data_t ahbcfg = {.d32 = 0 };
-+
-+ /* Mask Host Interrupts */
-+
-+ /* Clear and disable HCINTs */
-+ for (i = 0; i < core_if->core_params->host_channels; i++) {
-+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0);
-+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF);
-+
-+ }
-+
-+ /* Clear and disable HAINT */
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000);
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF);
-+
-+ /* Mask Device Interrupts */
-+ if (!core_if->multiproc_int_enable) {
-+ /* Clear and disable IN Endpoint interrupts */
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0);
-+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
-+ diepint, 0xFFFFFFFF);
-+ }
-+
-+ /* Clear and disable OUT Endpoint interrupts */
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0);
-+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
-+ doepint, 0xFFFFFFFF);
-+ }
-+
-+ /* Clear and disable DAINT */
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint,
-+ 0xFFFFFFFF);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0);
-+ } else {
-+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
-+ diepeachintmsk[i], 0);
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
-+ diepint, 0xFFFFFFFF);
-+ }
-+
-+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
-+ doepeachintmsk[i], 0);
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
-+ doepint, 0xFFFFFFFF);
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
-+ 0);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint,
-+ 0xFFFFFFFF);
-+
-+ }
-+
-+ /* Disable interrupts */
-+ ahbcfg.b.glblintrmsk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-+
-+ /* Disable all interrupts. */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Clear any pending OTG Interrupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF);
-+}
-+
-+/**
-+ * Unmask Port Connection Detected interrupt
-+ *
-+ */
-+static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 };
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
-+}
-+#endif
-+
-+/**
-+ * Starts the ADP Probing
-+ *
-+ * @param core_if the pointer to core_if structure.
-+ */
-+uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if)
-+{
-+
-+ adpctl_data_t adpctl = {.d32 = 0};
-+ gpwrdn_data_t gpwrdn;
-+#if 0
-+ adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1,
-+ .b.adp_sns_int = 1, b.adp_tmout_int};
-+#endif
-+ dwc_otg_disable_global_interrupts(core_if);
-+ DWC_PRINTF("ADP Probe Start\n");
-+ core_if->adp.probe_enabled = 1;
-+
-+ adpctl.b.adpres = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ while (adpctl.b.adpres) {
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ }
-+
-+ adpctl.d32 = 0;
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+
-+ /* In Host mode unmask SRP detected interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.sts_chngint_msk = 1;
-+ if (!gpwrdn.b.idsts) {
-+ gpwrdn.b.srp_det_msk = 1;
-+ }
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+
-+ adpctl.b.adp_tmout_int_msk = 1;
-+ adpctl.b.adp_prb_int_msk = 1;
-+ adpctl.b.prb_dschg = 1;
-+ adpctl.b.prb_delta = 1;
-+ adpctl.b.prb_per = 1;
-+ adpctl.b.adpen = 1;
-+ adpctl.b.enaprb = 1;
-+
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+ DWC_PRINTF("ADP Probe Finish\n");
-+ return 0;
-+}
-+
-+/**
-+ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted
-+ * within 3 seconds.
-+ *
-+ * @param core_if the pointer to core_if strucure.
-+ */
-+void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if)
-+{
-+ core_if->adp.sense_timer_started = 1;
-+ DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ );
-+}
-+
-+/**
-+ * Starts the ADP Sense
-+ *
-+ * @param core_if the pointer to core_if strucure.
-+ */
-+uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if)
-+{
-+ adpctl_data_t adpctl;
-+
-+ DWC_PRINTF("ADP Sense Start\n");
-+
-+ /* Unmask ADP sense interrupt and mask all other from the core */
-+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
-+ adpctl.b.adp_sns_int_msk = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+ dwc_otg_disable_global_interrupts(core_if); // vahrama
-+
-+ /* Set ADP reset bit*/
-+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
-+ adpctl.b.adpres = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ while (adpctl.b.adpres) {
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ }
-+
-+ adpctl.b.adpres = 0;
-+ adpctl.b.adpen = 1;
-+ adpctl.b.enasns = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ dwc_otg_adp_sense_timer_start(core_if);
-+
-+ return 0;
-+}
-+
-+/**
-+ * Stops the ADP Probing
-+ *
-+ * @param core_if the pointer to core_if strucure.
-+ */
-+uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if)
-+{
-+
-+ adpctl_data_t adpctl;
-+ DWC_PRINTF("Stop ADP probe\n");
-+ core_if->adp.probe_enabled = 0;
-+ core_if->adp.probe_counter = 0;
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+
-+ adpctl.b.adpen = 0;
-+ adpctl.b.adp_prb_int = 1;
-+ adpctl.b.adp_tmout_int = 1;
-+ adpctl.b.adp_sns_int = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ return 0;
-+}
-+
-+/**
-+ * Stops the ADP Sensing
-+ *
-+ * @param core_if the pointer to core_if strucure.
-+ */
-+uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if)
-+{
-+ adpctl_data_t adpctl;
-+
-+ core_if->adp.sense_enabled = 0;
-+
-+ adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
-+ adpctl.b.enasns = 0;
-+ adpctl.b.adp_sns_int = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ return 0;
-+}
-+
-+/**
-+ * Called to turn on the VBUS after initial ADP probe in host mode.
-+ * If port power was already enabled in cil_hcd_start function then
-+ * only schedule a timer.
-+ *
-+ * @param core_if the pointer to core_if structure.
-+ */
-+void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if)
-+{
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr);
-+
-+ if (hprt0.b.prtpwr == 0) {
-+ hprt0.b.prtpwr = 1;
-+ //DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+
-+ dwc_otg_adp_vbuson_timer_start(core_if);
-+}
-+
-+/**
-+ * Called right after driver is loaded
-+ * to perform initial actions for ADP
-+ *
-+ * @param core_if the pointer to core_if structure.
-+ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN
-+ */
-+void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host)
-+{
-+ gpwrdn_data_t gpwrdn;
-+
-+ DWC_PRINTF("ADP Initial Start\n");
-+ core_if->adp.adp_started = 1;
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+ dwc_otg_disable_global_interrupts(core_if);
-+ if (is_host) {
-+ DWC_PRINTF("HOST MODE\n");
-+ /* Enable Power Down Logic Interrupt*/
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ /* Initialize first ADP probe to obtain Ramp Time value */
-+ core_if->adp.initial_probe = 1;
-+ dwc_otg_adp_probe_start(core_if);
-+ } else {
-+ gotgctl_data_t gotgctl;
-+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ DWC_PRINTF("DEVICE MODE\n");
-+ if (gotgctl.b.bsesvld == 0) {
-+ /* Enable Power Down Logic Interrupt*/
-+ gpwrdn.d32 = 0;
-+ DWC_PRINTF("VBUS is not valid - start ADP probe\n");
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ core_if->adp.initial_probe = 1;
-+ dwc_otg_adp_probe_start(core_if);
-+ } else {
-+ DWC_PRINTF("VBUS is valid - initialize core as a Device\n");
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ dwc_otg_dump_global_registers(core_if);
-+ dwc_otg_dump_dev_registers(core_if);
-+ }
-+ }
-+}
-+
-+void dwc_otg_adp_init(dwc_otg_core_if_t * core_if)
-+{
-+ core_if->adp.adp_started = 0;
-+ core_if->adp.initial_probe = 0;
-+ core_if->adp.probe_timer_values[0] = -1;
-+ core_if->adp.probe_timer_values[1] = -1;
-+ core_if->adp.probe_enabled = 0;
-+ core_if->adp.sense_enabled = 0;
-+ core_if->adp.sense_timer_started = 0;
-+ core_if->adp.vbuson_timer_started = 0;
-+ core_if->adp.probe_counter = 0;
-+ core_if->adp.gpwrdn = 0;
-+ core_if->adp.attached = DWC_OTG_ADP_UNKOWN;
-+ /* Initialize timers */
-+ core_if->adp.sense_timer =
-+ DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if);
-+ core_if->adp.vbuson_timer =
-+ DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if);
-+ if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer)
-+ {
-+ DWC_ERROR("Could not allocate memory for ADP timers\n");
-+ }
-+}
-+
-+void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if)
-+{
-+ gpwrdn_data_t gpwrdn = { .d32 = 0 };
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ if (core_if->adp.probe_enabled)
-+ dwc_otg_adp_probe_stop(core_if);
-+ if (core_if->adp.sense_enabled)
-+ dwc_otg_adp_sense_stop(core_if);
-+ if (core_if->adp.sense_timer_started)
-+ DWC_TIMER_CANCEL(core_if->adp.sense_timer);
-+ if (core_if->adp.vbuson_timer_started)
-+ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
-+ DWC_TIMER_FREE(core_if->adp.sense_timer);
-+ DWC_TIMER_FREE(core_if->adp.vbuson_timer);
-+}
-+
-+/////////////////////////////////////////////////////////////////////
-+////////////// ADP Interrupt Handlers ///////////////////////////////
-+/////////////////////////////////////////////////////////////////////
-+/**
-+ * This function sets Ramp Timer values
-+ */
-+static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ if (core_if->adp.probe_timer_values[0] == -1) {
-+ core_if->adp.probe_timer_values[0] = val;
-+ core_if->adp.probe_timer_values[1] = -1;
-+ return 1;
-+ } else {
-+ core_if->adp.probe_timer_values[1] =
-+ core_if->adp.probe_timer_values[0];
-+ core_if->adp.probe_timer_values[0] = val;
-+ return 0;
-+ }
-+}
-+
-+/**
-+ * This function compares Ramp Timer values
-+ */
-+static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t diff;
-+ if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1])
-+ diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1];
-+ else
-+ diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0];
-+ if(diff < 2) {
-+ return 0;
-+ } else {
-+ return 1;
-+ }
-+}
-+
-+/**
-+ * This function handles ADP Probe Interrupts
-+ */
-+static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if,
-+ uint32_t val)
-+{
-+ adpctl_data_t adpctl = {.d32 = 0 };
-+ gpwrdn_data_t gpwrdn, temp;
-+ adpctl.d32 = val;
-+
-+ temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ core_if->adp.probe_counter++;
-+ core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ if (adpctl.b.rtim == 0 && !temp.b.idsts){
-+ DWC_PRINTF("RTIM value is 0\n");
-+ goto exit;
-+ }
-+ if (set_timer_value(core_if, adpctl.b.rtim) &&
-+ core_if->adp.initial_probe) {
-+ core_if->adp.initial_probe = 0;
-+ dwc_otg_adp_probe_stop(core_if);
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* check which value is for device mode and which for Host mode */
-+ if (!temp.b.idsts) { /* considered host mode value is 0 */
-+ /*
-+ * Turn on VBUS after initial ADP probe.
-+ */
-+ core_if->op_state = A_HOST;
-+ dwc_otg_enable_global_interrupts(core_if);
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_hcd_start(core_if);
-+ dwc_otg_adp_turnon_vbus(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ } else {
-+ /*
-+ * Initiate SRP after initial ADP probe.
-+ */
-+ dwc_otg_enable_global_interrupts(core_if);
-+ dwc_otg_initiate_srp(core_if);
-+ }
-+ } else if (core_if->adp.probe_counter > 2){
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ if (compare_timer_values(core_if)) {
-+ DWC_PRINTF("Difference in timer values !!! \n");
-+// core_if->adp.attached = DWC_OTG_ADP_ATTACHED;
-+ dwc_otg_adp_probe_stop(core_if);
-+
-+ /* Power on the core */
-+ if (core_if->power_down == 2) {
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ }
-+
-+ /* check which value is for device mode and which for Host mode */
-+ if (!temp.b.idsts) { /* considered host mode value is 0 */
-+ /* Disable Interrupt from Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, gpwrdn.d32, 0);
-+
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ core_if->op_state = A_HOST;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+ } else {
-+ gotgctl_data_t gotgctl;
-+ /* Mask SRP detected interrupt from Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.srp_det_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Disable Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, gpwrdn.d32, 0);
-+
-+ /*
-+ * Initialize the Core for Device mode.
-+ */
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+
-+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ if (!gotgctl.b.bsesvld) {
-+ dwc_otg_initiate_srp(core_if);
-+ }
-+ }
-+ }
-+ if (core_if->power_down == 2) {
-+ if (gpwrdn.b.bsessvld) {
-+ /* Mask SRP detected interrupt from Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.srp_det_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Disable Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /*
-+ * Initialize the Core for Device mode.
-+ */
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ }
-+ }
-+ }
-+exit:
-+ /* Clear interrupt */
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ adpctl.b.adp_prb_int = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function hadles ADP Sense Interrupt
-+ */
-+static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if)
-+{
-+ adpctl_data_t adpctl;
-+ /* Stop ADP Sense timer */
-+ DWC_TIMER_CANCEL(core_if->adp.sense_timer);
-+
-+ /* Restart ADP Sense timer */
-+ dwc_otg_adp_sense_timer_start(core_if);
-+
-+ /* Clear interrupt */
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ adpctl.b.adp_sns_int = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function handles ADP Probe Interrupts
-+ */
-+static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if,
-+ uint32_t val)
-+{
-+ adpctl_data_t adpctl = {.d32 = 0 };
-+ adpctl.d32 = val;
-+ set_timer_value(core_if, adpctl.b.rtim);
-+
-+ /* Clear interrupt */
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ adpctl.b.adp_tmout_int = 1;
-+ dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+
-+ return 0;
-+}
-+
-+/**
-+ * ADP Interrupt handler.
-+ *
-+ */
-+int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if)
-+{
-+ int retval = 0;
-+ adpctl_data_t adpctl = {.d32 = 0};
-+
-+ adpctl.d32 = dwc_otg_adp_read_reg(core_if);
-+ DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32);
-+
-+ if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) {
-+ DWC_PRINTF("ADP Sense interrupt\n");
-+ retval |= dwc_otg_adp_handle_sns_intr(core_if);
-+ }
-+ if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) {
-+ DWC_PRINTF("ADP timeout interrupt\n");
-+ retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32);
-+ }
-+ if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) {
-+ DWC_PRINTF("ADP Probe interrupt\n");
-+ adpctl.b.adp_prb_int = 1;
-+ retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32);
-+ }
-+
-+// dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0);
-+ //dwc_otg_adp_write_reg(core_if, adpctl.d32);
-+ DWC_PRINTF("RETURN FROM ADP ISR\n");
-+
-+ return retval;
-+}
-+
-+/**
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if)
-+{
-+
-+#ifndef DWC_HOST_ONLY
-+ hprt0_data_t hprt0;
-+ gpwrdn_data_t gpwrdn;
-+ DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n");
-+
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ /* check which value is for device mode and which for Host mode */
-+ if (!gpwrdn.b.idsts) { /* considered host mode value is 0 */
-+ DWC_PRINTF("SRP: Host mode\n");
-+
-+ if (core_if->adp_enable) {
-+ dwc_otg_adp_probe_stop(core_if);
-+
-+ /* Power on the core */
-+ if (core_if->power_down == 2) {
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ }
-+
-+ core_if->op_state = A_HOST;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+ }
-+
-+ /* Turn on the port power bit. */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Start the Connection timer. So a message can be displayed
-+ * if connect does not occur within 10 seconds. */
-+ cil_hcd_session_start(core_if);
-+ } else {
-+ DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__);
-+ if (core_if->adp_enable) {
-+ dwc_otg_adp_probe_stop(core_if);
-+
-+ /* Power on the core */
-+ if (core_if->power_down == 2) {
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ }
-+
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 0;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
-+ gpwrdn.d32);
-+
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ }
-+ }
-+#endif
-+ return 1;
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h
-@@ -0,0 +1,80 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $
-+ * $Revision: #7 $
-+ * $Date: 2011/10/24 $
-+ * $Change: 1871159 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_ADP_H__
-+#define __DWC_OTG_ADP_H__
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the Attach Detect Protocol interfaces and defines
-+ * (functions) and structures for Linux.
-+ *
-+ */
-+
-+#define DWC_OTG_ADP_UNATTACHED 0
-+#define DWC_OTG_ADP_ATTACHED 1
-+#define DWC_OTG_ADP_UNKOWN 2
-+
-+typedef struct dwc_otg_adp {
-+ uint32_t adp_started;
-+ uint32_t initial_probe;
-+ int32_t probe_timer_values[2];
-+ uint32_t probe_enabled;
-+ uint32_t sense_enabled;
-+ dwc_timer_t *sense_timer;
-+ uint32_t sense_timer_started;
-+ dwc_timer_t *vbuson_timer;
-+ uint32_t vbuson_timer_started;
-+ uint32_t attached;
-+ uint32_t probe_counter;
-+ uint32_t gpwrdn;
-+} dwc_otg_adp_t;
-+
-+/**
-+ * Attach Detect Protocol functions
-+ */
-+
-+extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value);
-+extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if);
-+extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if);
-+extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if);
-+extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if);
-+extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
-+extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if);
-+extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if);
-+extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if);
-+
-+#endif //__DWC_OTG_ADP_H__
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c
-@@ -0,0 +1,1210 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
-+ * $Revision: #44 $
-+ * $Date: 2010/11/29 $
-+ * $Change: 1636033 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing. The Linux driver attributes
-+ * feature will be used to provide the Linux Diagnostic
-+ * Interface. These attributes are accessed through sysfs.
-+ */
-+
-+/** @page "Linux Module Attributes"
-+ *
-+ * The Linux module attributes feature is used to provide the Linux
-+ * Diagnostic Interface. These attributes are accessed through sysfs.
-+ * The diagnostic interface will provide access to the controller for
-+ * bringing up the hardware and testing.
-+
-+ The following table shows the attributes.
-+ <table>
-+ <tr>
-+ <td><b> Name</b></td>
-+ <td><b> Description</b></td>
-+ <td><b> Access</b></td>
-+ </tr>
-+
-+ <tr>
-+ <td> mode </td>
-+ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnpcapable </td>
-+ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srpcapable </td>
-+ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hsic_connect </td>
-+ <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> inv_sel_hsic </td>
-+ <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register.
-+ Read returns the current value.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hnp </td>
-+ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> srp </td>
-+ <td> Initiates the Session Request Protocol. Read returns the status.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> buspower </td>
-+ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> bussuspend </td>
-+ <td> Suspends the USB bus.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> busconnected </td>
-+ <td> Gets the connection status of the bus</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gotgctl </td>
-+ <td> Gets or sets the Core Control Status Register.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gusbcfg </td>
-+ <td> Gets or sets the Core USB Configuration Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> grxfsiz </td>
-+ <td> Gets or sets the Receive FIFO Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gnptxfsiz </td>
-+ <td> Gets or sets the non-periodic Transmit Size Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gpvndctl </td>
-+ <td> Gets or sets the PHY Vendor Control Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> ggpio </td>
-+ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
-+ or sets the upper 16 bits.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> guid </td>
-+ <td> Gets or sets the value of the User ID Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> gsnpsid </td>
-+ <td> Gets the value of the Synopsys ID Regester</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> devspeed </td>
-+ <td> Gets or sets the device speed setting in the DCFG register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> enumspeed </td>
-+ <td> Gets the device enumeration Speed.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hptxfsiz </td>
-+ <td> Gets the value of the Host Periodic Transmit FIFO</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hprt0 </td>
-+ <td> Gets or sets the value in the Host Port Control and Status Register</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regoffset </td>
-+ <td> Sets the register offset for the next Register Access</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regvalue </td>
-+ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> remote_wakeup </td>
-+ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
-+ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
-+ Wakeup signalling bit in the Device Control Register is set for 1
-+ milli-second.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> rem_wakeup_pwrdn </td>
-+ <td> On read, shows the status core - hibernated or not. On write, initiates
-+ a remote wakeup of the device from Hibernation. </td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> mode_ch_tim_en </td>
-+ <td> This bit is used to enable or disable the host core to wait for 200 PHY
-+ clock cycles at the end of Resume to change the opmode signal to the PHY to 00
-+ after Suspend or LPM. </td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> fr_interval </td>
-+ <td> On read, shows the value of HFIR Frame Interval. On write, dynamically
-+ reload HFIR register during runtime. The application can write a value to this
-+ register only after the Port Enable bit of the Host Port Control and Status
-+ register (HPRT.PrtEnaPort) has been set </td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> disconnect_us </td>
-+ <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us
-+ which causes soft disconnect for 100us. Applicable only for device mode of operation.</td>
-+ <td> Read/Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> regdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> spramdump </td>
-+ <td> Dumps the contents of core registers.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcddump </td>
-+ <td> Dumps the current HCD state.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> hcd_frrem </td>
-+ <td> Shows the average value of the Frame Remaining
-+ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
-+ occurs. This can be used to determine the average interrupt latency. Also
-+ shows the average Frame Remaining value for start_transfer and the "a" and
-+ "b" sample points. The "a" and "b" sample points may be used during debugging
-+ bto determine how long it takes to execute a section of the HCD code.</td>
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> rd_reg_test </td>
-+ <td> Displays the time required to read the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is read).
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> wr_reg_test </td>
-+ <td> Displays the time required to write the GNPTXFSIZ register many times
-+ (the output shows the number of times the register is written).
-+ <td> Read</td>
-+ </tr>
-+
-+ <tr>
-+ <td> lpm_response </td>
-+ <td> Gets or sets lpm_response mode. Applicable only in device mode.
-+ <td> Write</td>
-+ </tr>
-+
-+ <tr>
-+ <td> sleep_status </td>
-+ <td> Shows sleep status of device.
-+ <td> Read</td>
-+ </tr>
-+
-+ </table>
-+
-+ Example usage:
-+ To get the current mode:
-+ cat /sys/devices/lm0/mode
-+
-+ To power down the USB:
-+ echo 0 > /sys/devices/lm0/buspower
-+ */
-+
-+#include "dwc_otg_os_dep.h"
-+#include "dwc_os.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_core_if.h"
-+#include "dwc_otg_pcd_if.h"
-+#include "dwc_otg_hcd_if.h"
-+
-+/*
-+ * MACROs for defining sysfs attribute
-+ */
-+#ifdef LM_INTERFACE
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t val; \
-+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
-+ return count; \
-+}
-+
-+#elif defined(PCI_INTERFACE)
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t val; \
-+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
-+ return count; \
-+}
-+
-+#elif defined(PLATFORM_INTERFACE)
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ struct platform_device *platform_dev = \
-+ container_of(_dev, struct platform_device, dev); \
-+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
-+ uint32_t val; \
-+ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
-+ __func__, _dev, platform_dev, otg_dev); \
-+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
-+ return sprintf (buf, "%s = 0x%x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
-+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
-+ uint32_t set = simple_strtoul(buf, NULL, 16); \
-+ dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
-+ return count; \
-+}
-+#endif
-+
-+/*
-+ * MACROs for defining sysfs attribute for 32-bit registers
-+ */
-+#ifdef LM_INTERFACE
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t val; \
-+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
-+ dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
-+ return count; \
-+}
-+#elif defined(PCI_INTERFACE)
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t val; \
-+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
-+ return count; \
-+}
-+
-+#elif defined(PLATFORM_INTERFACE)
-+#include "dwc_otg_dbg.h"
-+#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
-+{ \
-+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
-+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
-+ uint32_t val; \
-+ DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
-+ __func__, _dev, platform_dev, otg_dev); \
-+ val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
-+ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
-+}
-+#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
-+static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
-+ const char *buf, size_t count) \
-+{ \
-+ struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
-+ dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
-+ uint32_t val = simple_strtoul(buf, NULL, 16); \
-+ dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
-+ return count; \
-+}
-+
-+#endif
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \
-+DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
-+
-+#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
-+DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
-+DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
-+
-+/** @name Functions for Show/Store of Attributes */
-+/**@{*/
-+
-+/**
-+ * Helper function returning the otg_device structure of the given device
-+ */
-+static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
-+{
-+ dwc_otg_device_t *otg_dev;
-+ DWC_OTG_GETDRVDEV(otg_dev, _dev);
-+ return otg_dev;
-+}
-+
-+/**
-+ * Show the register offset of the Register Access.
-+ */
-+static ssize_t regoffset_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n",
-+ otg_dev->os_dep.reg_offset);
-+}
-+
-+/**
-+ * Set the register offset for the next Register Access Read/Write
-+ */
-+static ssize_t regoffset_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t offset = simple_strtoul(buf, NULL, 16);
-+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
-+ if (offset < SZ_256K) {
-+#elif defined(PCI_INTERFACE)
-+ if (offset < 0x00040000) {
-+#endif
-+ otg_dev->os_dep.reg_offset = offset;
-+ } else {
-+ dev_err(_dev, "invalid offset\n");
-+ }
-+
-+ return count;
-+}
-+
-+DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store);
-+
-+/**
-+ * Show the value of the register at the offset in the reg_offset
-+ * attribute.
-+ */
-+static ssize_t regvalue_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t val;
-+ volatile uint32_t *addr;
-+
-+ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
-+ /* Calculate the address */
-+ addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
-+ (uint8_t *) otg_dev->os_dep.base);
-+ val = DWC_READ_REG32(addr);
-+ return snprintf(buf,
-+ sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1,
-+ "Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset,
-+ val);
-+ } else {
-+ dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset);
-+ return sprintf(buf, "invalid offset\n");
-+ }
-+}
-+
-+/**
-+ * Store the value in the register at the offset in the reg_offset
-+ * attribute.
-+ *
-+ */
-+static ssize_t regvalue_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ volatile uint32_t *addr;
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
-+ if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
-+ /* Calculate the address */
-+ addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
-+ (uint8_t *) otg_dev->os_dep.base);
-+ DWC_WRITE_REG32(addr, val);
-+ } else {
-+ dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
-+ otg_dev->os_dep.reg_offset);
-+ }
-+ return count;
-+}
-+
-+DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store);
-+
-+/*
-+ * Attributes
-+ */
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC");
-+
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,
-+ &(otg_dev->core_if->core_global_regs->gusbcfg),
-+ "GUSBCFG");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,
-+ &(otg_dev->core_if->core_global_regs->grxfsiz),
-+ "GRXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,
-+ &(otg_dev->core_if->core_global_regs->gnptxfsiz),
-+ "GNPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,
-+ &(otg_dev->core_if->core_global_regs->gpvndctl),
-+ "GPVNDCTL");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,
-+ &(otg_dev->core_if->core_global_regs->ggpio),
-+ "GGPIO");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid),
-+ "GUID");
-+DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,
-+ &(otg_dev->core_if->core_global_regs->gsnpsid),
-+ "GSNPSID");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed");
-+DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed");
-+
-+DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,
-+ &(otg_dev->core_if->core_global_regs->hptxfsiz),
-+ "HPTXFSIZ");
-+DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0");
-+
-+/**
-+ * @todo Add code to initiate the HNP.
-+ */
-+/**
-+ * Show the HNP status bit
-+ */
-+static ssize_t hnp_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "HstNegScs = 0x%x\n",
-+ dwc_otg_get_hnpstatus(otg_dev->core_if));
-+}
-+
-+/**
-+ * Set the HNP Request bit
-+ */
-+static ssize_t hnp_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ dwc_otg_set_hnpreq(otg_dev->core_if, in);
-+ return count;
-+}
-+
-+DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
-+
-+/**
-+ * @todo Add code to initiate the SRP.
-+ */
-+/**
-+ * Show the SRP status bit
-+ */
-+static ssize_t srp_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "SesReqScs = 0x%x\n",
-+ dwc_otg_get_srpstatus(otg_dev->core_if));
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif
-+}
-+
-+/**
-+ * Set the SRP Request bit
-+ */
-+static ssize_t srp_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ dwc_otg_pcd_initiate_srp(otg_dev->pcd);
-+#endif
-+ return count;
-+}
-+
-+DEVICE_ATTR(srp, 0644, srp_show, srp_store);
-+
-+/**
-+ * @todo Need to do more for power on/off?
-+ */
-+/**
-+ * Show the Bus Power status
-+ */
-+static ssize_t buspower_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "Bus Power = 0x%x\n",
-+ dwc_otg_get_prtpower(otg_dev->core_if));
-+}
-+
-+/**
-+ * Set the Bus Power status
-+ */
-+static ssize_t buspower_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t on = simple_strtoul(buf, NULL, 16);
-+ dwc_otg_set_prtpower(otg_dev->core_if, on);
-+ return count;
-+}
-+
-+DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
-+
-+/**
-+ * @todo Need to do more for suspend?
-+ */
-+/**
-+ * Show the Bus Suspend status
-+ */
-+static ssize_t bussuspend_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "Bus Suspend = 0x%x\n",
-+ dwc_otg_get_prtsuspend(otg_dev->core_if));
-+}
-+
-+/**
-+ * Set the Bus Suspend status
-+ */
-+static ssize_t bussuspend_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ dwc_otg_set_prtsuspend(otg_dev->core_if, in);
-+ return count;
-+}
-+
-+DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
-+
-+/**
-+ * Show the Mode Change Ready Timer status
-+ */
-+static ssize_t mode_ch_tim_en_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n",
-+ dwc_otg_get_mode_ch_tim(otg_dev->core_if));
-+}
-+
-+/**
-+ * Set the Mode Change Ready Timer status
-+ */
-+static ssize_t mode_ch_tim_en_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t in = simple_strtoul(buf, NULL, 16);
-+ dwc_otg_set_mode_ch_tim(otg_dev->core_if, in);
-+ return count;
-+}
-+
-+DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store);
-+
-+/**
-+ * Show the value of HFIR Frame Interval bitfield
-+ */
-+static ssize_t fr_interval_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "Frame Interval = 0x%x\n",
-+ dwc_otg_get_fr_interval(otg_dev->core_if));
-+}
-+
-+/**
-+ * Set the HFIR Frame Interval value
-+ */
-+static ssize_t fr_interval_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t in = simple_strtoul(buf, NULL, 10);
-+ dwc_otg_set_fr_interval(otg_dev->core_if, in);
-+ return count;
-+}
-+
-+DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store);
-+
-+/**
-+ * Show the status of Remote Wakeup.
-+ */
-+static ssize_t remote_wakeup_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+
-+ return sprintf(buf,
-+ "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n",
-+ dwc_otg_get_remotewakesig(otg_dev->core_if),
-+ dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd),
-+ dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if));
-+#else
-+ return sprintf(buf, "Host Only Mode!\n");
-+#endif /* DWC_HOST_ONLY */
-+}
-+
-+/**
-+ * Initiate a remote wakeup of the host. The Device control register
-+ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
-+ * flag is set.
-+ *
-+ */
-+static ssize_t remote_wakeup_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+
-+ if (val & 1) {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
-+ } else {
-+ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
-+ }
-+#endif /* DWC_HOST_ONLY */
-+ return count;
-+}
-+
-+DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show,
-+ remote_wakeup_store);
-+
-+/**
-+ * Show the whether core is hibernated or not.
-+ */
-+static ssize_t rem_wakeup_pwrdn_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+
-+ if (dwc_otg_get_core_state(otg_dev->core_if)) {
-+ DWC_PRINTF("Core is in hibernation\n");
-+ } else {
-+ DWC_PRINTF("Core is not in hibernation\n");
-+ }
-+#endif /* DWC_HOST_ONLY */
-+ return 0;
-+}
-+
-+extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
-+ int rem_wakeup, int reset);
-+
-+/**
-+ * Initiate a remote wakeup of the device to exit from hibernation.
-+ */
-+static ssize_t rem_wakeup_pwrdn_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0);
-+#endif
-+ return count;
-+}
-+
-+DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show,
-+ rem_wakeup_pwrdn_store);
-+
-+static ssize_t disconnect_us(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+
-+#ifndef DWC_HOST_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+ DWC_PRINTF("The Passed value is %04x\n", val);
-+
-+ dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50);
-+
-+#endif /* DWC_HOST_ONLY */
-+ return count;
-+}
-+
-+DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t regdump_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+
-+ dwc_otg_dump_global_registers(otg_dev->core_if);
-+ if (dwc_otg_is_host_mode(otg_dev->core_if)) {
-+ dwc_otg_dump_host_registers(otg_dev->core_if);
-+ } else {
-+ dwc_otg_dump_dev_registers(otg_dev->core_if);
-+
-+ }
-+ return sprintf(buf, "Register Dump\n");
-+}
-+
-+DEVICE_ATTR(regdump, S_IRUGO, regdump_show, 0);
-+
-+/**
-+ * Dump global registers and either host or device registers (depending on the
-+ * current mode of the core).
-+ */
-+static ssize_t spramdump_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+
-+ //dwc_otg_dump_spram(otg_dev->core_if);
-+
-+ return sprintf(buf, "SPRAM Dump\n");
-+}
-+
-+DEVICE_ATTR(spramdump, S_IRUGO, spramdump_show, 0);
-+
-+/**
-+ * Dump the current hcd state.
-+ */
-+static ssize_t hcddump_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ dwc_otg_hcd_dump_state(otg_dev->hcd);
-+#endif /* DWC_DEVICE_ONLY */
-+ return sprintf(buf, "HCD Dump\n");
-+}
-+
-+DEVICE_ATTR(hcddump, S_IRUGO, hcddump_show, 0);
-+
-+/**
-+ * Dump the average frame remaining at SOF. This can be used to
-+ * determine average interrupt latency. Frame remaining is also shown for
-+ * start transfer and two additional sample points.
-+ */
-+static ssize_t hcd_frrem_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+#ifndef DWC_DEVICE_ONLY
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+
-+ dwc_otg_hcd_dump_frrem(otg_dev->hcd);
-+#endif /* DWC_DEVICE_ONLY */
-+ return sprintf(buf, "HCD Dump Frame Remaining\n");
-+}
-+
-+DEVICE_ATTR(hcd_frrem, S_IRUGO, hcd_frrem_show, 0);
-+
-+/**
-+ * Displays the time required to read the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is read).
-+ */
-+#define RW_REG_COUNT 10000000
-+#define MSEC_PER_JIFFIE 1000/HZ
-+static ssize_t rd_reg_test_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ int i;
-+ int time;
-+ int start_jiffies;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_otg_get_gnptxfsiz(otg_dev->core_if);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf(buf,
-+ "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-+}
-+
-+DEVICE_ATTR(rd_reg_test, S_IRUGO, rd_reg_test_show, 0);
-+
-+/**
-+ * Displays the time required to write the GNPTXFSIZ register many times (the
-+ * output shows the number of times the register is written).
-+ */
-+static ssize_t wr_reg_test_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t reg_val;
-+ int i;
-+ int time;
-+ int start_jiffies;
-+
-+ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
-+ HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
-+ reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if);
-+ start_jiffies = jiffies;
-+ for (i = 0; i < RW_REG_COUNT; i++) {
-+ dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val);
-+ }
-+ time = jiffies - start_jiffies;
-+ return sprintf(buf,
-+ "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
-+ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
-+}
-+
-+DEVICE_ATTR(wr_reg_test, S_IRUGO, wr_reg_test_show, 0);
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+
-+/**
-+* Show the lpm_response attribute.
-+*/
-+static ssize_t lpmresp_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+
-+ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if))
-+ return sprintf(buf, "** LPM is DISABLED **\n");
-+
-+ if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
-+ return sprintf(buf, "** Current mode is not device mode\n");
-+ }
-+ return sprintf(buf, "lpm_response = %d\n",
-+ dwc_otg_get_lpmresponse(otg_dev->core_if));
-+}
-+
-+/**
-+* Store the lpm_response attribute.
-+*/
-+static ssize_t lpmresp_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ uint32_t val = simple_strtoul(buf, NULL, 16);
-+
-+ if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) {
-+ return 0;
-+ }
-+
-+ if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
-+ return 0;
-+ }
-+
-+ dwc_otg_set_lpmresponse(otg_dev->core_if, val);
-+ return count;
-+}
-+
-+DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store);
-+
-+/**
-+* Show the sleep_status attribute.
-+*/
-+static ssize_t sleepstatus_show(struct device *_dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ return sprintf(buf, "Sleep Status = %d\n",
-+ dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if));
-+}
-+
-+/**
-+ * Store the sleep_status attribure.
-+ */
-+static ssize_t sleepstatus_store(struct device *_dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
-+ dwc_otg_core_if_t *core_if = otg_dev->core_if;
-+
-+ if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) {
-+ if (dwc_otg_is_host_mode(core_if)) {
-+
-+ DWC_PRINTF("Host initiated resume\n");
-+ dwc_otg_set_prtresume(otg_dev->core_if, 1);
-+ }
-+ }
-+
-+ return count;
-+}
-+
-+DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show,
-+ sleepstatus_store);
-+
-+#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */
-+
-+/**@}*/
-+
-+/**
-+ * Create the device files
-+ */
-+void dwc_otg_attr_create(
-+#ifdef LM_INTERFACE
-+ struct lm_device *dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *dev
-+#endif
-+ )
-+{
-+ int error;
-+
-+ error = device_create_file(&dev->dev, &dev_attr_regoffset);
-+ error = device_create_file(&dev->dev, &dev_attr_regvalue);
-+ error = device_create_file(&dev->dev, &dev_attr_mode);
-+ error = device_create_file(&dev->dev, &dev_attr_hnpcapable);
-+ error = device_create_file(&dev->dev, &dev_attr_srpcapable);
-+ error = device_create_file(&dev->dev, &dev_attr_hsic_connect);
-+ error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic);
-+ error = device_create_file(&dev->dev, &dev_attr_hnp);
-+ error = device_create_file(&dev->dev, &dev_attr_srp);
-+ error = device_create_file(&dev->dev, &dev_attr_buspower);
-+ error = device_create_file(&dev->dev, &dev_attr_bussuspend);
-+ error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en);
-+ error = device_create_file(&dev->dev, &dev_attr_fr_interval);
-+ error = device_create_file(&dev->dev, &dev_attr_busconnected);
-+ error = device_create_file(&dev->dev, &dev_attr_gotgctl);
-+ error = device_create_file(&dev->dev, &dev_attr_gusbcfg);
-+ error = device_create_file(&dev->dev, &dev_attr_grxfsiz);
-+ error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz);
-+ error = device_create_file(&dev->dev, &dev_attr_gpvndctl);
-+ error = device_create_file(&dev->dev, &dev_attr_ggpio);
-+ error = device_create_file(&dev->dev, &dev_attr_guid);
-+ error = device_create_file(&dev->dev, &dev_attr_gsnpsid);
-+ error = device_create_file(&dev->dev, &dev_attr_devspeed);
-+ error = device_create_file(&dev->dev, &dev_attr_enumspeed);
-+ error = device_create_file(&dev->dev, &dev_attr_hptxfsiz);
-+ error = device_create_file(&dev->dev, &dev_attr_hprt0);
-+ error = device_create_file(&dev->dev, &dev_attr_remote_wakeup);
-+ error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
-+ error = device_create_file(&dev->dev, &dev_attr_disconnect_us);
-+ error = device_create_file(&dev->dev, &dev_attr_regdump);
-+ error = device_create_file(&dev->dev, &dev_attr_spramdump);
-+ error = device_create_file(&dev->dev, &dev_attr_hcddump);
-+ error = device_create_file(&dev->dev, &dev_attr_hcd_frrem);
-+ error = device_create_file(&dev->dev, &dev_attr_rd_reg_test);
-+ error = device_create_file(&dev->dev, &dev_attr_wr_reg_test);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ error = device_create_file(&dev->dev, &dev_attr_lpm_response);
-+ error = device_create_file(&dev->dev, &dev_attr_sleep_status);
-+#endif
-+}
-+
-+/**
-+ * Remove the device files
-+ */
-+void dwc_otg_attr_remove(
-+#ifdef LM_INTERFACE
-+ struct lm_device *dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *dev
-+#endif
-+ )
-+{
-+ device_remove_file(&dev->dev, &dev_attr_regoffset);
-+ device_remove_file(&dev->dev, &dev_attr_regvalue);
-+ device_remove_file(&dev->dev, &dev_attr_mode);
-+ device_remove_file(&dev->dev, &dev_attr_hnpcapable);
-+ device_remove_file(&dev->dev, &dev_attr_srpcapable);
-+ device_remove_file(&dev->dev, &dev_attr_hsic_connect);
-+ device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic);
-+ device_remove_file(&dev->dev, &dev_attr_hnp);
-+ device_remove_file(&dev->dev, &dev_attr_srp);
-+ device_remove_file(&dev->dev, &dev_attr_buspower);
-+ device_remove_file(&dev->dev, &dev_attr_bussuspend);
-+ device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en);
-+ device_remove_file(&dev->dev, &dev_attr_fr_interval);
-+ device_remove_file(&dev->dev, &dev_attr_busconnected);
-+ device_remove_file(&dev->dev, &dev_attr_gotgctl);
-+ device_remove_file(&dev->dev, &dev_attr_gusbcfg);
-+ device_remove_file(&dev->dev, &dev_attr_grxfsiz);
-+ device_remove_file(&dev->dev, &dev_attr_gnptxfsiz);
-+ device_remove_file(&dev->dev, &dev_attr_gpvndctl);
-+ device_remove_file(&dev->dev, &dev_attr_ggpio);
-+ device_remove_file(&dev->dev, &dev_attr_guid);
-+ device_remove_file(&dev->dev, &dev_attr_gsnpsid);
-+ device_remove_file(&dev->dev, &dev_attr_devspeed);
-+ device_remove_file(&dev->dev, &dev_attr_enumspeed);
-+ device_remove_file(&dev->dev, &dev_attr_hptxfsiz);
-+ device_remove_file(&dev->dev, &dev_attr_hprt0);
-+ device_remove_file(&dev->dev, &dev_attr_remote_wakeup);
-+ device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
-+ device_remove_file(&dev->dev, &dev_attr_disconnect_us);
-+ device_remove_file(&dev->dev, &dev_attr_regdump);
-+ device_remove_file(&dev->dev, &dev_attr_spramdump);
-+ device_remove_file(&dev->dev, &dev_attr_hcddump);
-+ device_remove_file(&dev->dev, &dev_attr_hcd_frrem);
-+ device_remove_file(&dev->dev, &dev_attr_rd_reg_test);
-+ device_remove_file(&dev->dev, &dev_attr_wr_reg_test);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ device_remove_file(&dev->dev, &dev_attr_lpm_response);
-+ device_remove_file(&dev->dev, &dev_attr_sleep_status);
-+#endif
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h
-@@ -0,0 +1,89 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
-+ * $Revision: #13 $
-+ * $Date: 2010/06/21 $
-+ * $Change: 1532021 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_ATTR_H__)
-+#define __DWC_OTG_ATTR_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux device attributes.
-+ */
-+extern struct device_attribute dev_attr_regoffset;
-+extern struct device_attribute dev_attr_regvalue;
-+
-+extern struct device_attribute dev_attr_mode;
-+extern struct device_attribute dev_attr_hnpcapable;
-+extern struct device_attribute dev_attr_srpcapable;
-+extern struct device_attribute dev_attr_hnp;
-+extern struct device_attribute dev_attr_srp;
-+extern struct device_attribute dev_attr_buspower;
-+extern struct device_attribute dev_attr_bussuspend;
-+extern struct device_attribute dev_attr_mode_ch_tim_en;
-+extern struct device_attribute dev_attr_fr_interval;
-+extern struct device_attribute dev_attr_busconnected;
-+extern struct device_attribute dev_attr_gotgctl;
-+extern struct device_attribute dev_attr_gusbcfg;
-+extern struct device_attribute dev_attr_grxfsiz;
-+extern struct device_attribute dev_attr_gnptxfsiz;
-+extern struct device_attribute dev_attr_gpvndctl;
-+extern struct device_attribute dev_attr_ggpio;
-+extern struct device_attribute dev_attr_guid;
-+extern struct device_attribute dev_attr_gsnpsid;
-+extern struct device_attribute dev_attr_devspeed;
-+extern struct device_attribute dev_attr_enumspeed;
-+extern struct device_attribute dev_attr_hptxfsiz;
-+extern struct device_attribute dev_attr_hprt0;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+extern struct device_attribute dev_attr_lpm_response;
-+extern struct device_attribute devi_attr_sleep_status;
-+#endif
-+
-+void dwc_otg_attr_create(
-+#ifdef LM_INTERFACE
-+ struct lm_device *dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *dev
-+#endif
-+ );
-+
-+void dwc_otg_attr_remove(
-+#ifdef LM_INTERFACE
-+ struct lm_device *dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *dev
-+#endif
-+ );
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
-@@ -0,0 +1,1876 @@
-+/* ==========================================================================
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * This file contains the most of the CFI(Core Feature Interface)
-+ * implementation for the OTG.
-+ */
-+
-+#ifdef DWC_UTE_CFI
-+
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_cfi.h"
-+
-+/** This definition should actually migrate to the Portability Library */
-+#define DWC_CONSTANT_CPU_TO_LE16(x) (x)
-+
-+extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex);
-+
-+static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen);
-+static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
-+ struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *ctrl_req);
-+static int cfi_set_feature_value(struct dwc_otg_pcd *pcd);
-+static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req);
-+static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req);
-+static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req);
-+static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req);
-+static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep);
-+
-+static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if);
-+static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue);
-+static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue);
-+
-+static uint8_t resize_fifos(dwc_otg_core_if_t * core_if);
-+
-+/** This is the header of the all features descriptor */
-+static cfi_all_features_header_t all_props_desc_header = {
-+ .wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100),
-+ .wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG),
-+ .wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9),
-+};
-+
-+/** This is an array of statically allocated feature descriptors */
-+static cfi_feature_desc_header_t prop_descs[] = {
-+
-+ /* FT_ID_DMA_MODE */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1),
-+ },
-+
-+ /* FT_ID_DMA_BUFFER_SETUP */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
-+ },
-+
-+ /* FT_ID_DMA_BUFF_ALIGN */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
-+ },
-+
-+ /* FT_ID_DMA_CONCAT_SETUP */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ //.wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
-+ },
-+
-+ /* FT_ID_DMA_CIRCULAR */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
-+ },
-+
-+ /* FT_ID_THRESHOLD_SETUP */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
-+ },
-+
-+ /* FT_ID_DFIFO_DEPTH */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH),
-+ .bmAttributes = CFI_FEATURE_ATTR_RO,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
-+ },
-+
-+ /* FT_ID_TX_FIFO_DEPTH */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
-+ },
-+
-+ /* FT_ID_RX_FIFO_DEPTH */
-+ {
-+ .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH),
-+ .bmAttributes = CFI_FEATURE_ATTR_RW,
-+ .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
-+ }
-+};
-+
-+/** The table of feature names */
-+cfi_string_t prop_name_table[] = {
-+ {FT_ID_DMA_MODE, "dma_mode"},
-+ {FT_ID_DMA_BUFFER_SETUP, "buffer_setup"},
-+ {FT_ID_DMA_BUFF_ALIGN, "buffer_align"},
-+ {FT_ID_DMA_CONCAT_SETUP, "concat_setup"},
-+ {FT_ID_DMA_CIRCULAR, "buffer_circular"},
-+ {FT_ID_THRESHOLD_SETUP, "threshold_setup"},
-+ {FT_ID_DFIFO_DEPTH, "dfifo_depth"},
-+ {FT_ID_TX_FIFO_DEPTH, "txfifo_depth"},
-+ {FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"},
-+ {}
-+};
-+
-+/************************************************************************/
-+
-+/**
-+ * Returns the name of the feature by its ID
-+ * or NULL if no featute ID matches.
-+ *
-+ */
-+const uint8_t *get_prop_name(uint16_t prop_id, int *len)
-+{
-+ cfi_string_t *pstr;
-+ *len = 0;
-+
-+ for (pstr = prop_name_table; pstr && pstr->s; pstr++) {
-+ if (pstr->id == prop_id) {
-+ *len = DWC_STRLEN(pstr->s);
-+ return pstr->s;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+/**
-+ * This function handles all CFI specific control requests.
-+ *
-+ * Return a negative value to stall the DCE.
-+ */
-+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl)
-+{
-+ int retval = 0;
-+ dwc_otg_pcd_ep_t *ep = NULL;
-+ cfiobject_t *cfi = pcd->cfi;
-+ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
-+ uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength);
-+ uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue);
-+ uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex);
-+ uint32_t regaddr = 0;
-+ uint32_t regval = 0;
-+
-+ /* Save this Control Request in the CFI object.
-+ * The data field will be assigned in the data stage completion CB function.
-+ */
-+ cfi->ctrl_req = *ctrl;
-+ cfi->ctrl_req.data = NULL;
-+
-+ cfi->need_gadget_att = 0;
-+ cfi->need_status_in_complete = 0;
-+
-+ switch (ctrl->bRequest) {
-+ case VEN_CORE_GET_FEATURES:
-+ retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN);
-+ if (retval >= 0) {
-+ //dump_msg(cfi->buf_in.buf, retval);
-+ ep = &pcd->ep0;
-+
-+ retval = min((uint16_t) retval, wLen);
-+ /* Transfer this buffer to the host through the EP0-IN EP */
-+ ep->dwc_ep.dma_addr = cfi->buf_in.addr;
-+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
-+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
-+ ep->dwc_ep.xfer_len = retval;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ pcd->ep0_pending = 1;
-+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
-+ }
-+ retval = 0;
-+ break;
-+
-+ case VEN_CORE_GET_FEATURE:
-+ CFI_INFO("VEN_CORE_GET_FEATURE\n");
-+ retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN,
-+ pcd, ctrl);
-+ if (retval >= 0) {
-+ ep = &pcd->ep0;
-+
-+ retval = min((uint16_t) retval, wLen);
-+ /* Transfer this buffer to the host through the EP0-IN EP */
-+ ep->dwc_ep.dma_addr = cfi->buf_in.addr;
-+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
-+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
-+ ep->dwc_ep.xfer_len = retval;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ pcd->ep0_pending = 1;
-+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
-+ }
-+ CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval);
-+ dump_msg(cfi->buf_in.buf, retval);
-+ break;
-+
-+ case VEN_CORE_SET_FEATURE:
-+ CFI_INFO("VEN_CORE_SET_FEATURE\n");
-+ /* Set up an XFER to get the data stage of the control request,
-+ * which is the new value of the feature to be modified.
-+ */
-+ ep = &pcd->ep0;
-+ ep->dwc_ep.is_in = 0;
-+ ep->dwc_ep.dma_addr = cfi->buf_out.addr;
-+ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
-+ ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
-+ ep->dwc_ep.xfer_len = wLen;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ pcd->ep0_pending = 1;
-+ /* Read the control write's data stage */
-+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
-+ retval = 0;
-+ break;
-+
-+ case VEN_CORE_RESET_FEATURES:
-+ CFI_INFO("VEN_CORE_RESET_FEATURES\n");
-+ cfi->need_gadget_att = 1;
-+ cfi->need_status_in_complete = 1;
-+ retval = cfi_preproc_reset(pcd, ctrl);
-+ CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval);
-+ break;
-+
-+ case VEN_CORE_ACTIVATE_FEATURES:
-+ CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n");
-+ break;
-+
-+ case VEN_CORE_READ_REGISTER:
-+ CFI_INFO("VEN_CORE_READ_REGISTER\n");
-+ /* wValue optionally contains the HI WORD of the register offset and
-+ * wIndex contains the LOW WORD of the register offset
-+ */
-+ if (wValue == 0) {
-+ /* @TODO - MAS - fix the access to the base field */
-+ regaddr = 0;
-+ //regaddr = (uint32_t) pcd->otg_dev->os_dep.base;
-+ //GET_CORE_IF(pcd)->co
-+ regaddr |= wIndex;
-+ } else {
-+ regaddr = (wValue << 16) | wIndex;
-+ }
-+
-+ /* Read a 32-bit value of the memory at the regaddr */
-+ regval = DWC_READ_REG32((uint32_t *) regaddr);
-+
-+ ep = &pcd->ep0;
-+ dwc_memcpy(cfi->buf_in.buf, &regval, sizeof(uint32_t));
-+ ep->dwc_ep.is_in = 1;
-+ ep->dwc_ep.dma_addr = cfi->buf_in.addr;
-+ ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
-+ ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
-+ ep->dwc_ep.xfer_len = wLen;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ pcd->ep0_pending = 1;
-+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
-+ cfi->need_gadget_att = 0;
-+ retval = 0;
-+ break;
-+
-+ case VEN_CORE_WRITE_REGISTER:
-+ CFI_INFO("VEN_CORE_WRITE_REGISTER\n");
-+ /* Set up an XFER to get the data stage of the control request,
-+ * which is the new value of the register to be modified.
-+ */
-+ ep = &pcd->ep0;
-+ ep->dwc_ep.is_in = 0;
-+ ep->dwc_ep.dma_addr = cfi->buf_out.addr;
-+ ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
-+ ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
-+ ep->dwc_ep.xfer_len = wLen;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ pcd->ep0_pending = 1;
-+ /* Read the control write's data stage */
-+ dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
-+ retval = 0;
-+ break;
-+
-+ default:
-+ retval = -DWC_E_NOT_SUPPORTED;
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function prepares the core features descriptors and copies its
-+ * raw representation into the buffer <buf>.
-+ *
-+ * The buffer structure is as follows:
-+ * all_features_header (8 bytes)
-+ * features_#1 (8 bytes + feature name string length)
-+ * features_#2 (8 bytes + feature name string length)
-+ * .....
-+ * features_#n - where n=the total count of feature descriptors
-+ */
-+static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen)
-+{
-+ cfi_feature_desc_header_t *prop_hdr = prop_descs;
-+ cfi_feature_desc_header_t *prop;
-+ cfi_all_features_header_t *all_props_hdr = &all_props_desc_header;
-+ cfi_all_features_header_t *tmp;
-+ uint8_t *tmpbuf = buf;
-+ const uint8_t *pname = NULL;
-+ int i, j, namelen = 0, totlen;
-+
-+ /* Prepare and copy the core features into the buffer */
-+ CFI_INFO("%s:\n", __func__);
-+
-+ tmp = (cfi_all_features_header_t *) tmpbuf;
-+ *tmp = *all_props_hdr;
-+ tmpbuf += CFI_ALL_FEATURES_HDR_LEN;
-+
-+ j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t);
-+ for (i = 0; i < j; i++, prop_hdr++) {
-+ pname = get_prop_name(prop_hdr->wFeatureID, &namelen);
-+ prop = (cfi_feature_desc_header_t *) tmpbuf;
-+ *prop = *prop_hdr;
-+
-+ prop->bNameLen = namelen;
-+ prop->wLength =
-+ DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN +
-+ namelen);
-+
-+ tmpbuf += CFI_FEATURE_DESC_HDR_LEN;
-+ dwc_memcpy(tmpbuf, pname, namelen);
-+ tmpbuf += namelen;
-+ }
-+
-+ totlen = tmpbuf - buf;
-+
-+ if (totlen > 0) {
-+ tmp = (cfi_all_features_header_t *) buf;
-+ tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen);
-+ }
-+
-+ return totlen;
-+}
-+
-+/**
-+ * This function releases all the dynamic memory in the CFI object.
-+ */
-+static void cfi_release(cfiobject_t * cfiobj)
-+{
-+ cfi_ep_t *cfiep;
-+ dwc_list_link_t *tmp;
-+
-+ CFI_INFO("%s\n", __func__);
-+
-+ if (cfiobj->buf_in.buf) {
-+ DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf,
-+ cfiobj->buf_in.addr);
-+ cfiobj->buf_in.buf = NULL;
-+ }
-+
-+ if (cfiobj->buf_out.buf) {
-+ DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf,
-+ cfiobj->buf_out.addr);
-+ cfiobj->buf_out.buf = NULL;
-+ }
-+
-+ /* Free the Buffer Setup values for each EP */
-+ //list_for_each_entry(cfiep, &cfiobj->active_eps, lh) {
-+ DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) {
-+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+ cfi_free_ep_bs_dyn_data(cfiep);
-+ }
-+}
-+
-+/**
-+ * This function frees the dynamically allocated EP buffer setup data.
-+ */
-+static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep)
-+{
-+ if (cfiep->bm_sg) {
-+ DWC_FREE(cfiep->bm_sg);
-+ cfiep->bm_sg = NULL;
-+ }
-+
-+ if (cfiep->bm_align) {
-+ DWC_FREE(cfiep->bm_align);
-+ cfiep->bm_align = NULL;
-+ }
-+
-+ if (cfiep->bm_concat) {
-+ if (NULL != cfiep->bm_concat->wTxBytes) {
-+ DWC_FREE(cfiep->bm_concat->wTxBytes);
-+ cfiep->bm_concat->wTxBytes = NULL;
-+ }
-+ DWC_FREE(cfiep->bm_concat);
-+ cfiep->bm_concat = NULL;
-+ }
-+}
-+
-+/**
-+ * This function initializes the default values of the features
-+ * for a specific endpoint and should be called only once when
-+ * the EP is enabled first time.
-+ */
-+static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep)
-+{
-+ int retval = 0;
-+
-+ cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t));
-+ if (NULL == cfiep->bm_sg) {
-+ CFI_INFO("Failed to allocate memory for SG feature value\n");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
-+
-+ /* For the Concatenation feature's default value we do not allocate
-+ * memory for the wTxBytes field - it will be done in the set_feature_value
-+ * request handler.
-+ */
-+ cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t));
-+ if (NULL == cfiep->bm_concat) {
-+ CFI_INFO
-+ ("Failed to allocate memory for CONCATENATION feature value\n");
-+ DWC_FREE(cfiep->bm_sg);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
-+
-+ cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t));
-+ if (NULL == cfiep->bm_align) {
-+ CFI_INFO
-+ ("Failed to allocate memory for Alignment feature value\n");
-+ DWC_FREE(cfiep->bm_sg);
-+ DWC_FREE(cfiep->bm_concat);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t));
-+
-+ return retval;
-+}
-+
-+/**
-+ * The callback function that notifies the CFI on the activation of
-+ * an endpoint in the PCD. The following steps are done in this function:
-+ *
-+ * Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's
-+ * active endpoint)
-+ * Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP
-+ * Set the Buffer Mode to standard
-+ * Initialize the default values for all EP modes (SG, Circular, Concat, Align)
-+ * Add the cfi_ep_t object to the list of active endpoints in the CFI object
-+ */
-+static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
-+ struct dwc_otg_pcd_ep *ep)
-+{
-+ cfi_ep_t *cfiep;
-+ int retval = -DWC_E_NOT_SUPPORTED;
-+
-+ CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__,
-+ "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress);
-+ /* MAS - Check whether this endpoint already is in the list */
-+ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
-+
-+ if (NULL == cfiep) {
-+ /* Allocate a cfi_ep_t object */
-+ cfiep = DWC_ALLOC(sizeof(cfi_ep_t));
-+ if (NULL == cfiep) {
-+ CFI_INFO
-+ ("Unable to allocate memory for <cfiep> in function %s\n",
-+ __func__);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ dwc_memset(cfiep, 0, sizeof(cfi_ep_t));
-+
-+ /* Save the dwc_otg_pcd_ep pointer in the cfiep object */
-+ cfiep->ep = ep;
-+
-+ /* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */
-+ ep->dwc_ep.descs =
-+ DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP *
-+ sizeof(dwc_otg_dma_desc_t),
-+ &ep->dwc_ep.descs_dma_addr);
-+
-+ if (NULL == ep->dwc_ep.descs) {
-+ DWC_FREE(cfiep);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ DWC_LIST_INIT(&cfiep->lh);
-+
-+ /* Set the buffer mode to BM_STANDARD. It will be modified
-+ * when building descriptors for a specific buffer mode */
-+ ep->dwc_ep.buff_mode = BM_STANDARD;
-+
-+ /* Create and initialize the default values for this EP's Buffer modes */
-+ if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0)
-+ return retval;
-+
-+ /* Add the cfi_ep_t object to the CFI object's list of active endpoints */
-+ DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh);
-+ retval = 0;
-+ } else { /* The sought EP already is in the list */
-+ CFI_INFO("%s: The sought EP already is in the list\n",
-+ __func__);
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function is called when the data stage of a 3-stage Control Write request
-+ * is complete.
-+ *
-+ */
-+static int cfi_ctrl_write_complete(struct cfiobject *cfi,
-+ struct dwc_otg_pcd *pcd)
-+{
-+ uint32_t addr, reg_value;
-+ uint16_t wIndex, wValue;
-+ uint8_t bRequest;
-+ uint8_t *buf = cfi->buf_out.buf;
-+ //struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved;
-+ struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req;
-+ int retval = -DWC_E_NOT_SUPPORTED;
-+
-+ CFI_INFO("%s\n", __func__);
-+
-+ bRequest = ctrl_req->bRequest;
-+ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
-+ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
-+
-+ /*
-+ * Save the pointer to the data stage in the ctrl_req's <data> field.
-+ * The request should be already saved in the command stage by now.
-+ */
-+ ctrl_req->data = cfi->buf_out.buf;
-+ cfi->need_status_in_complete = 0;
-+ cfi->need_gadget_att = 0;
-+
-+ switch (bRequest) {
-+ case VEN_CORE_WRITE_REGISTER:
-+ /* The buffer contains raw data of the new value for the register */
-+ reg_value = *((uint32_t *) buf);
-+ if (wValue == 0) {
-+ addr = 0;
-+ //addr = (uint32_t) pcd->otg_dev->os_dep.base;
-+ addr += wIndex;
-+ } else {
-+ addr = (wValue << 16) | wIndex;
-+ }
-+
-+ //writel(reg_value, addr);
-+
-+ retval = 0;
-+ cfi->need_status_in_complete = 1;
-+ break;
-+
-+ case VEN_CORE_SET_FEATURE:
-+ /* The buffer contains raw data of the new value of the feature */
-+ retval = cfi_set_feature_value(pcd);
-+ if (retval < 0)
-+ return retval;
-+
-+ cfi->need_status_in_complete = 1;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function builds the DMA descriptors for the SG buffer mode.
-+ */
-+static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
-+ dwc_otg_pcd_request_t * req)
-+{
-+ struct dwc_otg_pcd_ep *ep = cfiep->ep;
-+ ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg;
-+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
-+ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
-+ dma_addr_t buff_addr = req->dma;
-+ int i;
-+ uint32_t txsize, off;
-+
-+ txsize = sgval->wSize;
-+ off = sgval->bOffset;
-+
-+// CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n",
-+// __func__, cfiep->ep->ep.name, txsize, off);
-+
-+ for (i = 0; i < sgval->bCount; i++) {
-+ desc->status.b.bs = BS_HOST_BUSY;
-+ desc->buf = buff_addr;
-+ desc->status.b.l = 0;
-+ desc->status.b.ioc = 0;
-+ desc->status.b.sp = 0;
-+ desc->status.b.bytes = txsize;
-+ desc->status.b.bs = BS_HOST_READY;
-+
-+ /* Set the next address of the buffer */
-+ buff_addr += txsize + off;
-+ desc_last = desc;
-+ desc++;
-+ }
-+
-+ /* Set the last, ioc and sp bits on the Last DMA Descriptor */
-+ desc_last->status.b.l = 1;
-+ desc_last->status.b.ioc = 1;
-+ desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
-+ /* Save the last DMA descriptor pointer */
-+ cfiep->dma_desc_last = desc_last;
-+ cfiep->desc_count = sgval->bCount;
-+}
-+
-+/**
-+ * This function builds the DMA descriptors for the Concatenation buffer mode.
-+ */
-+static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
-+ dwc_otg_pcd_request_t * req)
-+{
-+ struct dwc_otg_pcd_ep *ep = cfiep->ep;
-+ ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat;
-+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
-+ struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
-+ dma_addr_t buff_addr = req->dma;
-+ int i;
-+ uint16_t *txsize;
-+
-+ txsize = concatval->wTxBytes;
-+
-+ for (i = 0; i < concatval->hdr.bDescCount; i++) {
-+ desc->buf = buff_addr;
-+ desc->status.b.bs = BS_HOST_BUSY;
-+ desc->status.b.l = 0;
-+ desc->status.b.ioc = 0;
-+ desc->status.b.sp = 0;
-+ desc->status.b.bytes = *txsize;
-+ desc->status.b.bs = BS_HOST_READY;
-+
-+ txsize++;
-+ /* Set the next address of the buffer */
-+ buff_addr += UGETW(ep->desc->wMaxPacketSize);
-+ desc_last = desc;
-+ desc++;
-+ }
-+
-+ /* Set the last, ioc and sp bits on the Last DMA Descriptor */
-+ desc_last->status.b.l = 1;
-+ desc_last->status.b.ioc = 1;
-+ desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
-+ cfiep->dma_desc_last = desc_last;
-+ cfiep->desc_count = concatval->hdr.bDescCount;
-+}
-+
-+/**
-+ * This function builds the DMA descriptors for the Circular buffer mode
-+ */
-+static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
-+ dwc_otg_pcd_request_t * req)
-+{
-+ /* @todo: MAS - add implementation when this feature needs to be tested */
-+}
-+
-+/**
-+ * This function builds the DMA descriptors for the Alignment buffer mode
-+ */
-+static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
-+ dwc_otg_pcd_request_t * req)
-+{
-+ struct dwc_otg_pcd_ep *ep = cfiep->ep;
-+ ddma_align_buffer_setup_t *alignval = cfiep->bm_align;
-+ struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
-+ dma_addr_t buff_addr = req->dma;
-+
-+ desc->status.b.bs = BS_HOST_BUSY;
-+ desc->status.b.l = 1;
-+ desc->status.b.ioc = 1;
-+ desc->status.b.sp = ep->dwc_ep.sent_zlp;
-+ desc->status.b.bytes = req->length;
-+ /* Adjust the buffer alignment */
-+ desc->buf = (buff_addr + alignval->bAlign);
-+ desc->status.b.bs = BS_HOST_READY;
-+ cfiep->dma_desc_last = desc;
-+ cfiep->desc_count = 1;
-+}
-+
-+/**
-+ * This function builds the DMA descriptors chain for different modes of the
-+ * buffer setup of an endpoint.
-+ */
-+static void cfi_build_descriptors(struct cfiobject *cfi,
-+ struct dwc_otg_pcd *pcd,
-+ struct dwc_otg_pcd_ep *ep,
-+ dwc_otg_pcd_request_t * req)
-+{
-+ cfi_ep_t *cfiep;
-+
-+ /* Get the cfiep by the dwc_otg_pcd_ep */
-+ cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
-+ if (NULL == cfiep) {
-+ CFI_INFO("%s: Unable to find a matching active endpoint\n",
-+ __func__);
-+ return;
-+ }
-+
-+ cfiep->xfer_len = req->length;
-+
-+ /* Iterate through all the DMA descriptors */
-+ switch (cfiep->ep->dwc_ep.buff_mode) {
-+ case BM_SG:
-+ cfi_build_sg_descs(cfi, cfiep, req);
-+ break;
-+
-+ case BM_CONCAT:
-+ cfi_build_concat_descs(cfi, cfiep, req);
-+ break;
-+
-+ case BM_CIRCULAR:
-+ cfi_build_circ_descs(cfi, cfiep, req);
-+ break;
-+
-+ case BM_ALIGN:
-+ cfi_build_align_descs(cfi, cfiep, req);
-+ break;
-+
-+ default:
-+ break;
-+ }
-+}
-+
-+/**
-+ * Allocate DMA buffer for different Buffer modes.
-+ */
-+static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
-+ struct dwc_otg_pcd_ep *ep, dma_addr_t * dma,
-+ unsigned size, gfp_t flags)
-+{
-+ return DWC_DMA_ALLOC(size, dma);
-+}
-+
-+/**
-+ * This function initializes the CFI object.
-+ */
-+int init_cfi(cfiobject_t * cfiobj)
-+{
-+ CFI_INFO("%s\n", __func__);
-+
-+ /* Allocate a buffer for IN XFERs */
-+ cfiobj->buf_in.buf =
-+ DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr);
-+ if (NULL == cfiobj->buf_in.buf) {
-+ CFI_INFO("Unable to allocate buffer for INs\n");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ /* Allocate a buffer for OUT XFERs */
-+ cfiobj->buf_out.buf =
-+ DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr);
-+ if (NULL == cfiobj->buf_out.buf) {
-+ CFI_INFO("Unable to allocate buffer for OUT\n");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ /* Initialize the callback function pointers */
-+ cfiobj->ops.release = cfi_release;
-+ cfiobj->ops.ep_enable = cfi_ep_enable;
-+ cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete;
-+ cfiobj->ops.build_descriptors = cfi_build_descriptors;
-+ cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf;
-+
-+ /* Initialize the list of active endpoints in the CFI object */
-+ DWC_LIST_INIT(&cfiobj->active_eps);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function reads the required feature's current value into the buffer
-+ *
-+ * @retval: Returns negative as error, or the data length of the feature
-+ */
-+static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
-+ struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *ctrl_req)
-+{
-+ int retval = -DWC_E_NOT_SUPPORTED;
-+ struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
-+ uint16_t dfifo, rxfifo, txfifo;
-+
-+ switch (ctrl_req->wIndex) {
-+ /* Whether the DDMA is enabled or not */
-+ case FT_ID_DMA_MODE:
-+ *buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0;
-+ retval = 1;
-+ break;
-+
-+ case FT_ID_DMA_BUFFER_SETUP:
-+ retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req);
-+ break;
-+
-+ case FT_ID_DMA_BUFF_ALIGN:
-+ retval = cfi_ep_get_align_val(buf, pcd, ctrl_req);
-+ break;
-+
-+ case FT_ID_DMA_CONCAT_SETUP:
-+ retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req);
-+ break;
-+
-+ case FT_ID_DMA_CIRCULAR:
-+ CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n");
-+ break;
-+
-+ case FT_ID_THRESHOLD_SETUP:
-+ CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n");
-+ break;
-+
-+ case FT_ID_DFIFO_DEPTH:
-+ dfifo = get_dfifo_size(coreif);
-+ *((uint16_t *) buf) = dfifo;
-+ retval = sizeof(uint16_t);
-+ break;
-+
-+ case FT_ID_TX_FIFO_DEPTH:
-+ retval = get_txfifo_size(pcd, ctrl_req->wValue);
-+ if (retval >= 0) {
-+ txfifo = retval;
-+ *((uint16_t *) buf) = txfifo;
-+ retval = sizeof(uint16_t);
-+ }
-+ break;
-+
-+ case FT_ID_RX_FIFO_DEPTH:
-+ retval = get_rxfifo_size(coreif, ctrl_req->wValue);
-+ if (retval >= 0) {
-+ rxfifo = retval;
-+ *((uint16_t *) buf) = rxfifo;
-+ retval = sizeof(uint16_t);
-+ }
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function resets the SG for the specified EP to its default value
-+ */
-+static int cfi_reset_sg_val(cfi_ep_t * cfiep)
-+{
-+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
-+ return 0;
-+}
-+
-+/**
-+ * This function resets the Alignment for the specified EP to its default value
-+ */
-+static int cfi_reset_align_val(cfi_ep_t * cfiep)
-+{
-+ dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
-+ return 0;
-+}
-+
-+/**
-+ * This function resets the Concatenation for the specified EP to its default value
-+ * This function will also set the value of the wTxBytes field to NULL after
-+ * freeing the memory previously allocated for this field.
-+ */
-+static int cfi_reset_concat_val(cfi_ep_t * cfiep)
-+{
-+ /* First we need to free the wTxBytes field */
-+ if (cfiep->bm_concat->wTxBytes) {
-+ DWC_FREE(cfiep->bm_concat->wTxBytes);
-+ cfiep->bm_concat->wTxBytes = NULL;
-+ }
-+
-+ dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
-+ return 0;
-+}
-+
-+/**
-+ * This function resets all the buffer setups of the specified endpoint
-+ */
-+static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep)
-+{
-+ cfi_reset_sg_val(cfiep);
-+ cfi_reset_align_val(cfiep);
-+ cfi_reset_concat_val(cfiep);
-+ return 0;
-+}
-+
-+static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr,
-+ uint8_t rx_rst, uint8_t tx_rst)
-+{
-+ int retval = -DWC_E_INVALID;
-+ uint16_t tx_siz[15];
-+ uint16_t rx_siz = 0;
-+ dwc_otg_pcd_ep_t *ep = NULL;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
-+
-+ if (rx_rst) {
-+ rx_siz = params->dev_rx_fifo_size;
-+ params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz;
-+ }
-+
-+ if (tx_rst) {
-+ if (ep_addr == 0) {
-+ int i;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ tx_siz[i] =
-+ core_if->core_params->dev_tx_fifo_size[i];
-+ core_if->core_params->dev_tx_fifo_size[i] =
-+ core_if->init_txfsiz[i];
-+ }
-+ } else {
-+
-+ ep = get_ep_by_addr(pcd, ep_addr);
-+
-+ if (NULL == ep) {
-+ CFI_INFO
-+ ("%s: Unable to get the endpoint addr=0x%02x\n",
-+ __func__, ep_addr);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ tx_siz[0] =
-+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num -
-+ 1];
-+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] =
-+ GET_CORE_IF(pcd)->init_txfsiz[ep->
-+ dwc_ep.tx_fifo_num -
-+ 1];
-+ }
-+ }
-+
-+ if (resize_fifos(GET_CORE_IF(pcd))) {
-+ retval = 0;
-+ } else {
-+ CFI_INFO
-+ ("%s: Error resetting the feature Reset All(FIFO size)\n",
-+ __func__);
-+ if (rx_rst) {
-+ params->dev_rx_fifo_size = rx_siz;
-+ }
-+
-+ if (tx_rst) {
-+ if (ep_addr == 0) {
-+ int i;
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps;
-+ i++) {
-+ core_if->
-+ core_params->dev_tx_fifo_size[i] =
-+ tx_siz[i];
-+ }
-+ } else {
-+ params->dev_tx_fifo_size[ep->
-+ dwc_ep.tx_fifo_num -
-+ 1] = tx_siz[0];
-+ }
-+ }
-+ retval = -DWC_E_INVALID;
-+ }
-+ return retval;
-+}
-+
-+static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr)
-+{
-+ int retval = 0;
-+ cfi_ep_t *cfiep;
-+ cfiobject_t *cfi = pcd->cfi;
-+ dwc_list_link_t *tmp;
-+
-+ retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1);
-+ if (retval < 0) {
-+ return retval;
-+ }
-+
-+ /* If the EP address is known then reset the features for only that EP */
-+ if (addr) {
-+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == cfiep) {
-+ CFI_INFO("%s: Error getting the EP address 0x%02x\n",
-+ __func__, addr);
-+ return -DWC_E_INVALID;
-+ }
-+ retval = cfi_ep_reset_all_setup_vals(cfiep);
-+ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
-+ }
-+ /* Otherwise (wValue == 0), reset all features of all EP's */
-+ else {
-+ /* Traverse all the active EP's and reset the feature(s) value(s) */
-+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) {
-+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
-+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+ retval = cfi_ep_reset_all_setup_vals(cfiep);
-+ cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
-+ if (retval < 0) {
-+ CFI_INFO
-+ ("%s: Error resetting the feature Reset All\n",
-+ __func__);
-+ return retval;
-+ }
-+ }
-+ }
-+ return retval;
-+}
-+
-+static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd,
-+ uint8_t addr)
-+{
-+ int retval = 0;
-+ cfi_ep_t *cfiep;
-+ cfiobject_t *cfi = pcd->cfi;
-+ dwc_list_link_t *tmp;
-+
-+ /* If the EP address is known then reset the features for only that EP */
-+ if (addr) {
-+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == cfiep) {
-+ CFI_INFO("%s: Error getting the EP address 0x%02x\n",
-+ __func__, addr);
-+ return -DWC_E_INVALID;
-+ }
-+ retval = cfi_reset_sg_val(cfiep);
-+ }
-+ /* Otherwise (wValue == 0), reset all features of all EP's */
-+ else {
-+ /* Traverse all the active EP's and reset the feature(s) value(s) */
-+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) {
-+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
-+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+ retval = cfi_reset_sg_val(cfiep);
-+ if (retval < 0) {
-+ CFI_INFO
-+ ("%s: Error resetting the feature Buffer Setup\n",
-+ __func__);
-+ return retval;
-+ }
-+ }
-+ }
-+ return retval;
-+}
-+
-+static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr)
-+{
-+ int retval = 0;
-+ cfi_ep_t *cfiep;
-+ cfiobject_t *cfi = pcd->cfi;
-+ dwc_list_link_t *tmp;
-+
-+ /* If the EP address is known then reset the features for only that EP */
-+ if (addr) {
-+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == cfiep) {
-+ CFI_INFO("%s: Error getting the EP address 0x%02x\n",
-+ __func__, addr);
-+ return -DWC_E_INVALID;
-+ }
-+ retval = cfi_reset_concat_val(cfiep);
-+ }
-+ /* Otherwise (wValue == 0), reset all features of all EP's */
-+ else {
-+ /* Traverse all the active EP's and reset the feature(s) value(s) */
-+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) {
-+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
-+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+ retval = cfi_reset_concat_val(cfiep);
-+ if (retval < 0) {
-+ CFI_INFO
-+ ("%s: Error resetting the feature Concatenation Value\n",
-+ __func__);
-+ return retval;
-+ }
-+ }
-+ }
-+ return retval;
-+}
-+
-+static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr)
-+{
-+ int retval = 0;
-+ cfi_ep_t *cfiep;
-+ cfiobject_t *cfi = pcd->cfi;
-+ dwc_list_link_t *tmp;
-+
-+ /* If the EP address is known then reset the features for only that EP */
-+ if (addr) {
-+ cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == cfiep) {
-+ CFI_INFO("%s: Error getting the EP address 0x%02x\n",
-+ __func__, addr);
-+ return -DWC_E_INVALID;
-+ }
-+ retval = cfi_reset_align_val(cfiep);
-+ }
-+ /* Otherwise (wValue == 0), reset all features of all EP's */
-+ else {
-+ /* Traverse all the active EP's and reset the feature(s) value(s) */
-+ //list_for_each_entry(cfiep, &cfi->active_eps, lh) {
-+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
-+ cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+ retval = cfi_reset_align_val(cfiep);
-+ if (retval < 0) {
-+ CFI_INFO
-+ ("%s: Error resetting the feature Aliignment Value\n",
-+ __func__);
-+ return retval;
-+ }
-+ }
-+ }
-+ return retval;
-+
-+}
-+
-+static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req)
-+{
-+ int retval = 0;
-+
-+ switch (req->wIndex) {
-+ case 0:
-+ /* Reset all features */
-+ retval = cfi_handle_reset_all(pcd, req->wValue & 0xff);
-+ break;
-+
-+ case FT_ID_DMA_BUFFER_SETUP:
-+ /* Reset the SG buffer setup */
-+ retval =
-+ cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff);
-+ break;
-+
-+ case FT_ID_DMA_CONCAT_SETUP:
-+ /* Reset the Concatenation buffer setup */
-+ retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff);
-+ break;
-+
-+ case FT_ID_DMA_BUFF_ALIGN:
-+ /* Reset the Alignment buffer setup */
-+ retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff);
-+ break;
-+
-+ case FT_ID_TX_FIFO_DEPTH:
-+ retval =
-+ cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1);
-+ pcd->cfi->need_gadget_att = 0;
-+ break;
-+
-+ case FT_ID_RX_FIFO_DEPTH:
-+ retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0);
-+ pcd->cfi->need_gadget_att = 0;
-+ break;
-+ default:
-+ break;
-+ }
-+ return retval;
-+}
-+
-+/**
-+ * This function sets a new value for the SG buffer setup.
-+ */
-+static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
-+{
-+ uint8_t inaddr, outaddr;
-+ cfi_ep_t *epin, *epout;
-+ ddma_sg_buffer_setup_t *psgval;
-+ uint32_t desccount, size;
-+
-+ CFI_INFO("%s\n", __func__);
-+
-+ psgval = (ddma_sg_buffer_setup_t *) buf;
-+ desccount = (uint32_t) psgval->bCount;
-+ size = (uint32_t) psgval->wSize;
-+
-+ /* Check the DMA descriptor count */
-+ if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) {
-+ CFI_INFO
-+ ("%s: The count of DMA Descriptors should be between 1 and %d\n",
-+ __func__, MAX_DMA_DESCS_PER_EP);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ /* Check the DMA descriptor count */
-+
-+ if (size == 0) {
-+
-+ CFI_INFO("%s: The transfer size should be at least 1 byte\n",
-+ __func__);
-+
-+ return -DWC_E_INVALID;
-+
-+ }
-+
-+ inaddr = psgval->bInEndpointAddress;
-+ outaddr = psgval->bOutEndpointAddress;
-+
-+ epin = get_cfi_ep_by_addr(pcd->cfi, inaddr);
-+ epout = get_cfi_ep_by_addr(pcd->cfi, outaddr);
-+
-+ if (NULL == epin || NULL == epout) {
-+ CFI_INFO
-+ ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n",
-+ __func__, inaddr, outaddr);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ epin->ep->dwc_ep.buff_mode = BM_SG;
-+ dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
-+
-+ epout->ep->dwc_ep.buff_mode = BM_SG;
-+ dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function sets a new value for the buffer Alignment setup.
-+ */
-+static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
-+{
-+ cfi_ep_t *ep;
-+ uint8_t addr;
-+ ddma_align_buffer_setup_t *palignval;
-+
-+ palignval = (ddma_align_buffer_setup_t *) buf;
-+ addr = palignval->bEndpointAddress;
-+
-+ ep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
-+ __func__, addr);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ ep->ep->dwc_ep.buff_mode = BM_ALIGN;
-+ dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t));
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function sets a new value for the Concatenation buffer setup.
-+ */
-+static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
-+{
-+ uint8_t addr;
-+ cfi_ep_t *ep;
-+ struct _ddma_concat_buffer_setup_hdr *pConcatValHdr;
-+ uint16_t *pVals;
-+ uint32_t desccount;
-+ int i;
-+ uint16_t mps;
-+
-+ pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf;
-+ desccount = (uint32_t) pConcatValHdr->bDescCount;
-+ pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN);
-+
-+ /* Check the DMA descriptor count */
-+ if (desccount > MAX_DMA_DESCS_PER_EP) {
-+ CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n",
-+ __func__, MAX_DMA_DESCS_PER_EP);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ addr = pConcatValHdr->bEndpointAddress;
-+ ep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
-+ __func__, addr);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ mps = UGETW(ep->ep->desc->wMaxPacketSize);
-+
-+#if 0
-+ for (i = 0; i < desccount; i++) {
-+ CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]);
-+ }
-+ CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps);
-+#endif
-+
-+ /* Check the wTxSizes to be less than or equal to the mps */
-+ for (i = 0; i < desccount; i++) {
-+ if (pVals[i] > mps) {
-+ CFI_INFO
-+ ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n",
-+ __func__, i, pVals[i]);
-+ return -DWC_E_INVALID;
-+ }
-+ }
-+
-+ ep->ep->dwc_ep.buff_mode = BM_CONCAT;
-+ dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN);
-+
-+ /* Free the previously allocated storage for the wTxBytes */
-+ if (ep->bm_concat->wTxBytes) {
-+ DWC_FREE(ep->bm_concat->wTxBytes);
-+ }
-+
-+ /* Allocate a new storage for the wTxBytes field */
-+ ep->bm_concat->wTxBytes =
-+ DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount);
-+ if (NULL == ep->bm_concat->wTxBytes) {
-+ CFI_INFO("%s: Unable to allocate memory\n", __func__);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ /* Copy the new values into the wTxBytes filed */
-+ dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN,
-+ sizeof(uint16_t) * pConcatValHdr->bDescCount);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function calculates the total of all FIFO sizes
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ * @return The total of data FIFO sizes.
-+ *
-+ */
-+static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ uint16_t dfifo_total = 0;
-+ int i;
-+
-+ /* The shared RxFIFO size */
-+ dfifo_total =
-+ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
-+
-+ /* Add up each TxFIFO size to the total */
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ dfifo_total += params->dev_tx_fifo_size[i];
-+ }
-+
-+ return dfifo_total;
-+}
-+
-+/**
-+ * This function returns Rx FIFO size
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ * @return The total of data FIFO sizes.
-+ *
-+ */
-+static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue)
-+{
-+ switch (wValue >> 8) {
-+ case 0:
-+ return (core_if->pwron_rxfsiz <
-+ 32768) ? core_if->pwron_rxfsiz : 32768;
-+ break;
-+ case 1:
-+ return core_if->core_params->dev_rx_fifo_size;
-+ break;
-+ default:
-+ return -DWC_E_INVALID;
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function returns Tx FIFO size for IN EP
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ * @return The total of data FIFO sizes.
-+ *
-+ */
-+static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ ep = get_ep_by_addr(pcd, wValue & 0xff);
-+
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
-+ __func__, wValue & 0xff);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (!ep->dwc_ep.is_in) {
-+ CFI_INFO
-+ ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n",
-+ __func__, wValue & 0xff);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ switch (wValue >> 8) {
-+ case 0:
-+ return (GET_CORE_IF(pcd)->pwron_txfsiz
-+ [ep->dwc_ep.tx_fifo_num - 1] <
-+ 768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep->
-+ dwc_ep.tx_fifo_num
-+ - 1] : 32768;
-+ break;
-+ case 1:
-+ return GET_CORE_IF(pcd)->core_params->
-+ dev_tx_fifo_size[ep->dwc_ep.num - 1];
-+ break;
-+ default:
-+ return -DWC_E_INVALID;
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function checks if the submitted combination of
-+ * device mode FIFO sizes is possible or not.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ * @return 1 if possible, 0 otherwise.
-+ *
-+ */
-+static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if)
-+{
-+ uint16_t dfifo_actual = 0;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ uint16_t start_addr = 0;
-+ int i;
-+
-+ dfifo_actual =
-+ params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ dfifo_actual += params->dev_tx_fifo_size[i];
-+ }
-+
-+ if (dfifo_actual > core_if->total_fifo_size) {
-+ return 0;
-+ }
-+
-+ if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16)
-+ return 0;
-+
-+ if (params->dev_nperio_tx_fifo_size > 32768
-+ || params->dev_nperio_tx_fifo_size < 16)
-+ return 0;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+
-+ if (params->dev_tx_fifo_size[i] > 768
-+ || params->dev_tx_fifo_size[i] < 4)
-+ return 0;
-+ }
-+
-+ if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz)
-+ return 0;
-+ start_addr = params->dev_rx_fifo_size;
-+
-+ if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz)
-+ return 0;
-+ start_addr += params->dev_nperio_tx_fifo_size;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+
-+ if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i])
-+ return 0;
-+ start_addr += params->dev_tx_fifo_size[i];
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function resizes Device mode FIFOs
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ * @return 1 if successful, 0 otherwise
-+ *
-+ */
-+static uint8_t resize_fifos(dwc_otg_core_if_t * core_if)
-+{
-+ int i = 0;
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ uint32_t rx_fifo_size;
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t txfifosize[15];
-+
-+ uint32_t rx_fsz_bak;
-+ uint32_t nptxfsz_bak;
-+ uint32_t txfsz_bak[15];
-+
-+ uint16_t start_address;
-+ uint8_t retval = 1;
-+
-+ if (!check_fifo_sizes(core_if)) {
-+ return 0;
-+ }
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz);
-+ rx_fifo_size = params->dev_rx_fifo_size;
-+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
-+
-+ /*
-+ * Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_tx_fifo_size array and the FIFO size registers in
-+ * the dtxfsiz array run from 0 to 14.
-+ */
-+
-+ /* Non-periodic Tx FIFO */
-+ nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz);
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ start_address = params->dev_rx_fifo_size;
-+ nptxfifosize.b.startaddr = start_address;
-+
-+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+
-+ start_address += nptxfifosize.b.depth;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]);
-+
-+ txfifosize[i].b.depth = params->dev_tx_fifo_size[i];
-+ txfifosize[i].b.startaddr = start_address;
-+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
-+ txfifosize[i].d32);
-+
-+ start_address += txfifosize[i].b.depth;
-+ }
-+
-+ /** Check if register values are set correctly */
-+ if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) {
-+ retval = 0;
-+ }
-+
-+ if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) {
-+ retval = 0;
-+ }
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ if (txfifosize[i].d32 !=
-+ DWC_READ_REG32(&global_regs->dtxfsiz[i])) {
-+ retval = 0;
-+ }
-+ }
-+
-+ /** If register values are not set correctly, reset old values */
-+ if (retval == 0) {
-+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak);
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak);
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
-+ txfsz_bak[i]);
-+ }
-+ }
-+ } else {
-+ return 0;
-+ }
-+
-+ /* Flush the FIFOs */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function sets a new value for the buffer Alignment setup.
-+ */
-+static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
-+{
-+ int retval;
-+ uint32_t fsiz;
-+ uint16_t size;
-+ uint16_t ep_addr;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
-+ tx_fifo_size_setup_t *ptxfifoval;
-+
-+ ptxfifoval = (tx_fifo_size_setup_t *) buf;
-+ ep_addr = ptxfifoval->bEndpointAddress;
-+ size = ptxfifoval->wDepth;
-+
-+ ep = get_ep_by_addr(pcd, ep_addr);
-+
-+ CFI_INFO
-+ ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n",
-+ __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num);
-+
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
-+ __func__, ep_addr);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1];
-+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size;
-+
-+ if (resize_fifos(GET_CORE_IF(pcd))) {
-+ retval = 0;
-+ } else {
-+ CFI_INFO
-+ ("%s: Error setting the feature Tx FIFO Size for EP%d\n",
-+ __func__, ep_addr);
-+ params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function sets a new value for the buffer Alignment setup.
-+ */
-+static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
-+{
-+ int retval;
-+ uint32_t fsiz;
-+ uint16_t size;
-+ dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
-+ rx_fifo_size_setup_t *prxfifoval;
-+
-+ prxfifoval = (rx_fifo_size_setup_t *) buf;
-+ size = prxfifoval->wDepth;
-+
-+ fsiz = params->dev_rx_fifo_size;
-+ params->dev_rx_fifo_size = size;
-+
-+ if (resize_fifos(GET_CORE_IF(pcd))) {
-+ retval = 0;
-+ } else {
-+ CFI_INFO("%s: Error setting the feature Rx FIFO Size\n",
-+ __func__);
-+ params->dev_rx_fifo_size = fsiz;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function reads the SG of an EP's buffer setup into the buffer buf
-+ */
-+static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req)
-+{
-+ int retval = -DWC_E_INVALID;
-+ uint8_t addr;
-+ cfi_ep_t *ep;
-+
-+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */
-+ addr = req->wValue & 0xFF;
-+ if (addr == 0) /* The address should be non-zero */
-+ return retval;
-+
-+ ep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
-+ __func__, addr);
-+ return retval;
-+ }
-+
-+ dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN);
-+ retval = BS_SG_VAL_DESC_LEN;
-+ return retval;
-+}
-+
-+/**
-+ * This function reads the Concatenation value of an EP's buffer mode into
-+ * the buffer buf
-+ */
-+static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req)
-+{
-+ int retval = -DWC_E_INVALID;
-+ uint8_t addr;
-+ cfi_ep_t *ep;
-+ uint8_t desc_count;
-+
-+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */
-+ addr = req->wValue & 0xFF;
-+ if (addr == 0) /* The address should be non-zero */
-+ return retval;
-+
-+ ep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
-+ __func__, addr);
-+ return retval;
-+ }
-+
-+ /* Copy the header to the buffer */
-+ dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN);
-+ /* Advance the buffer pointer by the header size */
-+ buf += BS_CONCAT_VAL_HDR_LEN;
-+
-+ desc_count = ep->bm_concat->hdr.bDescCount;
-+ /* Copy alll the wTxBytes to the buffer */
-+ dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count);
-+
-+ retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count;
-+ return retval;
-+}
-+
-+/**
-+ * This function reads the buffer Alignment value of an EP's buffer mode into
-+ * the buffer buf
-+ *
-+ * @return The total number of bytes copied to the buffer or negative error code.
-+ */
-+static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
-+ struct cfi_usb_ctrlrequest *req)
-+{
-+ int retval = -DWC_E_INVALID;
-+ uint8_t addr;
-+ cfi_ep_t *ep;
-+
-+ /* The Low Byte of the wValue contains a non-zero address of the endpoint */
-+ addr = req->wValue & 0xFF;
-+ if (addr == 0) /* The address should be non-zero */
-+ return retval;
-+
-+ ep = get_cfi_ep_by_addr(pcd->cfi, addr);
-+ if (NULL == ep) {
-+ CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
-+ __func__, addr);
-+ return retval;
-+ }
-+
-+ dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN);
-+ retval = BS_ALIGN_VAL_HDR_LEN;
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function sets a new value for the specified feature
-+ *
-+ * @param pcd A pointer to the PCD object
-+ *
-+ * @return 0 if successful, negative error code otherwise to stall the DCE.
-+ */
-+static int cfi_set_feature_value(struct dwc_otg_pcd *pcd)
-+{
-+ int retval = -DWC_E_NOT_SUPPORTED;
-+ uint16_t wIndex, wValue;
-+ uint8_t bRequest;
-+ struct dwc_otg_core_if *coreif;
-+ cfiobject_t *cfi = pcd->cfi;
-+ struct cfi_usb_ctrlrequest *ctrl_req;
-+ uint8_t *buf;
-+ ctrl_req = &cfi->ctrl_req;
-+
-+ buf = pcd->cfi->ctrl_req.data;
-+
-+ coreif = GET_CORE_IF(pcd);
-+ bRequest = ctrl_req->bRequest;
-+ wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
-+ wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
-+
-+ /* See which feature is to be modified */
-+ switch (wIndex) {
-+ case FT_ID_DMA_BUFFER_SETUP:
-+ /* Modify the feature */
-+ if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0)
-+ return retval;
-+
-+ /* And send this request to the gadget */
-+ cfi->need_gadget_att = 1;
-+ break;
-+
-+ case FT_ID_DMA_BUFF_ALIGN:
-+ if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0)
-+ return retval;
-+ cfi->need_gadget_att = 1;
-+ break;
-+
-+ case FT_ID_DMA_CONCAT_SETUP:
-+ /* Modify the feature */
-+ if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0)
-+ return retval;
-+ cfi->need_gadget_att = 1;
-+ break;
-+
-+ case FT_ID_DMA_CIRCULAR:
-+ CFI_INFO("FT_ID_DMA_CIRCULAR\n");
-+ break;
-+
-+ case FT_ID_THRESHOLD_SETUP:
-+ CFI_INFO("FT_ID_THRESHOLD_SETUP\n");
-+ break;
-+
-+ case FT_ID_DFIFO_DEPTH:
-+ CFI_INFO("FT_ID_DFIFO_DEPTH\n");
-+ break;
-+
-+ case FT_ID_TX_FIFO_DEPTH:
-+ CFI_INFO("FT_ID_TX_FIFO_DEPTH\n");
-+ if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0)
-+ return retval;
-+ cfi->need_gadget_att = 0;
-+ break;
-+
-+ case FT_ID_RX_FIFO_DEPTH:
-+ CFI_INFO("FT_ID_RX_FIFO_DEPTH\n");
-+ if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0)
-+ return retval;
-+ cfi->need_gadget_att = 0;
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+#endif //DWC_UTE_CFI
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
-@@ -0,0 +1,320 @@
-+/* ==========================================================================
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_OTG_CFI_H__)
-+#define __DWC_OTG_CFI_H__
-+
-+#include "dwc_otg_pcd.h"
-+#include "dwc_cfi_common.h"
-+
-+/**
-+ * @file
-+ * This file contains the CFI related OTG PCD specific common constants,
-+ * interfaces(functions and macros) and data structures.The CFI Protocol is an
-+ * optional interface for internal testing purposes that a DUT may implement to
-+ * support testing of configurable features.
-+ *
-+ */
-+
-+struct dwc_otg_pcd;
-+struct dwc_otg_pcd_ep;
-+
-+/** OTG CFI Features (properties) ID constants */
-+/** This is a request for all Core Features */
-+#define FT_ID_DMA_MODE 0x0001
-+#define FT_ID_DMA_BUFFER_SETUP 0x0002
-+#define FT_ID_DMA_BUFF_ALIGN 0x0003
-+#define FT_ID_DMA_CONCAT_SETUP 0x0004
-+#define FT_ID_DMA_CIRCULAR 0x0005
-+#define FT_ID_THRESHOLD_SETUP 0x0006
-+#define FT_ID_DFIFO_DEPTH 0x0007
-+#define FT_ID_TX_FIFO_DEPTH 0x0008
-+#define FT_ID_RX_FIFO_DEPTH 0x0009
-+
-+/**********************************************************/
-+#define CFI_INFO_DEF
-+
-+#ifdef CFI_INFO_DEF
-+#define CFI_INFO(fmt...) DWC_PRINTF("CFI: " fmt);
-+#else
-+#define CFI_INFO(fmt...)
-+#endif
-+
-+#define min(x,y) ({ \
-+ x < y ? x : y; })
-+
-+#define max(x,y) ({ \
-+ x > y ? x : y; })
-+
-+/**
-+ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is
-+ * also used for setting up a buffer for Circular DDMA.
-+ */
-+struct _ddma_sg_buffer_setup {
-+#define BS_SG_VAL_DESC_LEN 6
-+ /* The OUT EP address */
-+ uint8_t bOutEndpointAddress;
-+ /* The IN EP address */
-+ uint8_t bInEndpointAddress;
-+ /* Number of bytes to put between transfer segments (must be DWORD boundaries) */
-+ uint8_t bOffset;
-+ /* The number of transfer segments (a DMA descriptors per each segment) */
-+ uint8_t bCount;
-+ /* Size (in byte) of each transfer segment */
-+ uint16_t wSize;
-+} __attribute__ ((packed));
-+typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t;
-+
-+/** Descriptor DMA Concatenation Buffer setup structure */
-+struct _ddma_concat_buffer_setup_hdr {
-+#define BS_CONCAT_VAL_HDR_LEN 4
-+ /* The endpoint for which the buffer is to be set up */
-+ uint8_t bEndpointAddress;
-+ /* The count of descriptors to be used */
-+ uint8_t bDescCount;
-+ /* The total size of the transfer */
-+ uint16_t wSize;
-+} __attribute__ ((packed));
-+typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t;
-+
-+/** Descriptor DMA Concatenation Buffer setup structure */
-+struct _ddma_concat_buffer_setup {
-+ /* The SG header */
-+ ddma_concat_buffer_setup_hdr_t hdr;
-+
-+ /* The XFER sizes pointer (allocated dynamically) */
-+ uint16_t *wTxBytes;
-+} __attribute__ ((packed));
-+typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t;
-+
-+/** Descriptor DMA Alignment Buffer setup structure */
-+struct _ddma_align_buffer_setup {
-+#define BS_ALIGN_VAL_HDR_LEN 2
-+ uint8_t bEndpointAddress;
-+ uint8_t bAlign;
-+} __attribute__ ((packed));
-+typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t;
-+
-+/** Transmit FIFO Size setup structure */
-+struct _tx_fifo_size_setup {
-+ uint8_t bEndpointAddress;
-+ uint16_t wDepth;
-+} __attribute__ ((packed));
-+typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t;
-+
-+/** Transmit FIFO Size setup structure */
-+struct _rx_fifo_size_setup {
-+ uint16_t wDepth;
-+} __attribute__ ((packed));
-+typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t;
-+
-+/**
-+ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest
-+ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer
-+ * to the data returned in the data stage of a 3-stage Control Write requests.
-+ */
-+struct cfi_usb_ctrlrequest {
-+ uint8_t bRequestType;
-+ uint8_t bRequest;
-+ uint16_t wValue;
-+ uint16_t wIndex;
-+ uint16_t wLength;
-+ uint8_t *data;
-+} UPACKED;
-+
-+/*---------------------------------------------------------------------------*/
-+
-+/**
-+ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures.
-+ * This structure is used to store the buffer setup data for any
-+ * enabled endpoint in the PCD.
-+ */
-+struct cfi_ep {
-+ /* Entry for the list container */
-+ dwc_list_link_t lh;
-+ /* Pointer to the active PCD endpoint structure */
-+ struct dwc_otg_pcd_ep *ep;
-+ /* The last descriptor in the chain of DMA descriptors of the endpoint */
-+ struct dwc_otg_dma_desc *dma_desc_last;
-+ /* The SG feature value */
-+ ddma_sg_buffer_setup_t *bm_sg;
-+ /* The Circular feature value */
-+ ddma_sg_buffer_setup_t *bm_circ;
-+ /* The Concatenation feature value */
-+ ddma_concat_buffer_setup_t *bm_concat;
-+ /* The Alignment feature value */
-+ ddma_align_buffer_setup_t *bm_align;
-+ /* XFER length */
-+ uint32_t xfer_len;
-+ /*
-+ * Count of DMA descriptors currently used.
-+ * The total should not exceed the MAX_DMA_DESCS_PER_EP value
-+ * defined in the dwc_otg_cil.h
-+ */
-+ uint32_t desc_count;
-+};
-+typedef struct cfi_ep cfi_ep_t;
-+
-+typedef struct cfi_dma_buff {
-+#define CFI_IN_BUF_LEN 1024
-+#define CFI_OUT_BUF_LEN 1024
-+ dma_addr_t addr;
-+ uint8_t *buf;
-+} cfi_dma_buff_t;
-+
-+struct cfiobject;
-+
-+/**
-+ * This is the interface for the CFI operations.
-+ *
-+ * @param ep_enable Called when any endpoint is enabled and activated.
-+ * @param release Called when the CFI object is released and it needs to correctly
-+ * deallocate the dynamic memory
-+ * @param ctrl_write_complete Called when the data stage of the request is complete
-+ */
-+typedef struct cfi_ops {
-+ int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
-+ struct dwc_otg_pcd_ep * ep);
-+ void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
-+ struct dwc_otg_pcd_ep * ep, dma_addr_t * dma,
-+ unsigned size, gfp_t flags);
-+ void (*release) (struct cfiobject * cfi);
-+ int (*ctrl_write_complete) (struct cfiobject * cfi,
-+ struct dwc_otg_pcd * pcd);
-+ void (*build_descriptors) (struct cfiobject * cfi,
-+ struct dwc_otg_pcd * pcd,
-+ struct dwc_otg_pcd_ep * ep,
-+ dwc_otg_pcd_request_t * req);
-+} cfi_ops_t;
-+
-+struct cfiobject {
-+ cfi_ops_t ops;
-+ struct dwc_otg_pcd *pcd;
-+ struct usb_gadget *gadget;
-+
-+ /* Buffers used to send/receive CFI-related request data */
-+ cfi_dma_buff_t buf_in;
-+ cfi_dma_buff_t buf_out;
-+
-+ /* CFI specific Control request wrapper */
-+ struct cfi_usb_ctrlrequest ctrl_req;
-+
-+ /* The list of active EP's in the PCD of type cfi_ep_t */
-+ dwc_list_link_t active_eps;
-+
-+ /* This flag shall control the propagation of a specific request
-+ * to the gadget's processing routines.
-+ * 0 - no gadget handling
-+ * 1 - the gadget needs to know about this request (w/o completing a status
-+ * phase - just return a 0 to the _setup callback)
-+ */
-+ uint8_t need_gadget_att;
-+
-+ /* Flag indicating whether the status IN phase needs to be
-+ * completed by the PCD
-+ */
-+ uint8_t need_status_in_complete;
-+};
-+typedef struct cfiobject cfiobject_t;
-+
-+#define DUMP_MSG
-+
-+#if defined(DUMP_MSG)
-+static inline void dump_msg(const u8 * buf, unsigned int length)
-+{
-+ unsigned int start, num, i;
-+ char line[52], *p;
-+
-+ if (length >= 512)
-+ return;
-+
-+ start = 0;
-+ while (length > 0) {
-+ num = min(length, 16u);
-+ p = line;
-+ for (i = 0; i < num; ++i) {
-+ if (i == 8)
-+ *p++ = ' ';
-+ DWC_SPRINTF(p, " %02x", buf[i]);
-+ p += 3;
-+ }
-+ *p = 0;
-+ DWC_DEBUG("%6x: %s\n", start, line);
-+ buf += num;
-+ start += num;
-+ length -= num;
-+ }
-+}
-+#else
-+static inline void dump_msg(const u8 * buf, unsigned int length)
-+{
-+}
-+#endif
-+
-+/**
-+ * This function returns a pointer to cfi_ep_t object with the addr address.
-+ */
-+static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi,
-+ uint8_t addr)
-+{
-+ struct cfi_ep *pcfiep;
-+ dwc_list_link_t *tmp;
-+
-+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
-+ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+
-+ if (pcfiep->ep->desc->bEndpointAddress == addr) {
-+ return pcfiep;
-+ }
-+ }
-+
-+ return NULL;
-+}
-+
-+/**
-+ * This function returns a pointer to cfi_ep_t object that matches
-+ * the dwc_otg_pcd_ep object.
-+ */
-+static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi,
-+ struct dwc_otg_pcd_ep *ep)
-+{
-+ struct cfi_ep *pcfiep = NULL;
-+ dwc_list_link_t *tmp;
-+
-+ DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
-+ pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
-+ if (pcfiep->ep == ep) {
-+ return pcfiep;
-+ }
-+ }
-+ return NULL;
-+}
-+
-+int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl);
-+
-+#endif /* (__DWC_OTG_CFI_H__) */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c
-@@ -0,0 +1,7141 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
-+ * $Revision: #191 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * The CIL manages the memory map for the core so that the HCD and PCD
-+ * don't have to do this separately. It also handles basic tasks like
-+ * reading/writing the registers and data FIFOs in the controller.
-+ * Some of the data access functions provide encapsulation of several
-+ * operations required to perform a task, such as writing multiple
-+ * registers to start a transfer. Finally, the CIL performs basic
-+ * services that are not specific to either the host or device modes
-+ * of operation. These services include management of the OTG Host
-+ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
-+ * Diagnostic API is also provided to allow testing of the controller
-+ * hardware.
-+ *
-+ * The Core Interface Layer has the following requirements:
-+ * - Provides basic controller operations.
-+ * - Minimal use of OS services.
-+ * - The OS services used will be abstracted by using inline functions
-+ * or macros.
-+ *
-+ */
-+
-+#include "dwc_os.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+
-+static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * This function is called to initialize the DWC_otg CSR data
-+ * structures. The register addresses in the device and host
-+ * structures are initialized from the base address supplied by the
-+ * caller. The calling function must make the OS calls to get the
-+ * base address of the DWC_otg controller registers. The core_params
-+ * argument holds the parameters that specify how the core should be
-+ * configured.
-+ *
-+ * @param reg_base_addr Base address of DWC_otg core registers
-+ *
-+ */
-+dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr)
-+{
-+ dwc_otg_core_if_t *core_if = 0;
-+ dwc_otg_dev_if_t *dev_if = 0;
-+ dwc_otg_host_if_t *host_if = 0;
-+ uint8_t *reg_base = (uint8_t *) reg_base_addr;
-+ int i = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr);
-+
-+ core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t));
-+
-+ if (core_if == NULL) {
-+ DWC_DEBUGPL(DBG_CIL,
-+ "Allocation of dwc_otg_core_if_t failed\n");
-+ return 0;
-+ }
-+ core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base;
-+
-+ /*
-+ * Allocate the Device Mode structures.
-+ */
-+ dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t));
-+
-+ if (dev_if == NULL) {
-+ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
-+ DWC_FREE(core_if);
-+ return 0;
-+ }
-+
-+ dev_if->dev_global_regs =
-+ (dwc_otg_device_global_regs_t *) (reg_base +
-+ DWC_DEV_GLOBAL_REG_OFFSET);
-+
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
-+ (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+
-+ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
-+ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
-+ (i * DWC_EP_REG_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
-+ i, &dev_if->in_ep_regs[i]->diepctl);
-+ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
-+ i, &dev_if->out_ep_regs[i]->doepctl);
-+ }
-+
-+ dev_if->speed = 0; // unknown
-+
-+ core_if->dev_if = dev_if;
-+
-+ /*
-+ * Allocate the Host Mode structures.
-+ */
-+ host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t));
-+
-+ if (host_if == NULL) {
-+ DWC_DEBUGPL(DBG_CIL,
-+ "Allocation of dwc_otg_host_if_t failed\n");
-+ DWC_FREE(dev_if);
-+ DWC_FREE(core_if);
-+ return 0;
-+ }
-+
-+ host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
-+ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
-+
-+ host_if->hprt0 =
-+ (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
-+
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
-+ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
-+ (i * DWC_OTG_CHAN_REGS_OFFSET));
-+ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
-+ i, &host_if->hc_regs[i]->hcchar);
-+ }
-+
-+ host_if->num_host_channels = MAX_EPS_CHANNELS;
-+ core_if->host_if = host_if;
-+
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ core_if->data_fifo[i] =
-+ (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET +
-+ (i * DWC_OTG_DATA_FIFO_SIZE));
-+ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n",
-+ i, (unsigned long)core_if->data_fifo[i]);
-+ }
-+
-+ core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET);
-+
-+ /* Initiate lx_state to L3 disconnected state */
-+ core_if->lx_state = DWC_OTG_L3;
-+ /*
-+ * Store the contents of the hardware configuration registers here for
-+ * easy access later.
-+ */
-+ core_if->hwcfg1.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1);
-+ core_if->hwcfg2.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
-+ core_if->hwcfg3.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3);
-+ core_if->hwcfg4.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
-+
-+ /* Force host mode to get HPTXFSIZ exact power on value */
-+ {
-+ gusbcfg_data_t gusbcfg = {.d32 = 0 };
-+ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ gusbcfg.b.force_host_mode = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
-+ dwc_mdelay(100);
-+ core_if->hptxfsiz.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
-+ gusbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ gusbcfg.b.force_host_mode = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
-+ dwc_mdelay(100);
-+ }
-+
-+ DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32);
-+ DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32);
-+ DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32);
-+ DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32);
-+
-+ core_if->hcfg.d32 =
-+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
-+ core_if->dcfg.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+
-+ DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32);
-+ DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode);
-+ DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture);
-+ DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep);
-+ DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n",
-+ core_if->hwcfg2.b.num_host_chan);
-+ DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n",
-+ core_if->hwcfg2.b.nonperio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n",
-+ core_if->hwcfg2.b.host_perio_tx_q_depth);
-+ DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n",
-+ core_if->hwcfg2.b.dev_token_q_depth);
-+
-+ DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n",
-+ core_if->hwcfg3.b.dfifo_depth);
-+ DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n",
-+ core_if->hwcfg3.b.xfer_size_cntr_width);
-+
-+ /*
-+ * Set the SRP sucess bit for FS-I2c
-+ */
-+ core_if->srp_success = 0;
-+ core_if->srp_timer_started = 0;
-+
-+ /*
-+ * Create new workqueue and init works
-+ */
-+ core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg");
-+ if (core_if->wq_otg == 0) {
-+ DWC_WARN("DWC_WORKQ_ALLOC failed\n");
-+ DWC_FREE(host_if);
-+ DWC_FREE(dev_if);
-+ DWC_FREE(core_if);
-+ return 0;
-+ }
-+
-+ core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid);
-+
-+ DWC_PRINTF("Core Release: %x.%x%x%x\n",
-+ (core_if->snpsid >> 12 & 0xF),
-+ (core_if->snpsid >> 8 & 0xF),
-+ (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF));
-+
-+ core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer",
-+ w_wakeup_detected, core_if);
-+ if (core_if->wkp_timer == 0) {
-+ DWC_WARN("DWC_TIMER_ALLOC failed\n");
-+ DWC_FREE(host_if);
-+ DWC_FREE(dev_if);
-+ DWC_WORKQ_FREE(core_if->wq_otg);
-+ DWC_FREE(core_if);
-+ return 0;
-+ }
-+
-+ if (dwc_otg_setup_params(core_if)) {
-+ DWC_WARN("Error while setting core params\n");
-+ }
-+
-+ core_if->hibernation_suspend = 0;
-+
-+ /** ADP initialization */
-+ dwc_otg_adp_init(core_if);
-+
-+ return core_if;
-+}
-+
-+/**
-+ * This function frees the structures allocated by dwc_otg_cil_init().
-+ *
-+ * @param core_if The core interface pointer returned from
-+ * dwc_otg_cil_init().
-+ *
-+ */
-+void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if)
-+{
-+ dctl_data_t dctl = {.d32 = 0 };
-+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
-+
-+ /* Disable all interrupts */
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
-+
-+ dctl.b.sftdiscon = 1;
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0,
-+ dctl.d32);
-+ }
-+
-+ if (core_if->wq_otg) {
-+ DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500);
-+ DWC_WORKQ_FREE(core_if->wq_otg);
-+ }
-+ if (core_if->dev_if) {
-+ DWC_FREE(core_if->dev_if);
-+ }
-+ if (core_if->host_if) {
-+ DWC_FREE(core_if->host_if);
-+ }
-+
-+ /** Remove ADP Stuff */
-+ dwc_otg_adp_remove(core_if);
-+ if (core_if->core_params) {
-+ DWC_FREE(core_if->core_params);
-+ }
-+ if (core_if->wkp_timer) {
-+ DWC_TIMER_FREE(core_if->wkp_timer);
-+ }
-+ if (core_if->srp_timer) {
-+ DWC_TIMER_FREE(core_if->srp_timer);
-+ }
-+ DWC_FREE(core_if);
-+}
-+
-+/**
-+ * This function enables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ gahbcfg_data_t ahbcfg = {.d32 = 0 };
-+ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
-+}
-+
-+/**
-+ * This function disables the controller's Global Interrupt in the AHB Config
-+ * register.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ gahbcfg_data_t ahbcfg = {.d32 = 0 };
-+ ahbcfg.b.glblintrmsk = 1; /* Disable interrupts */
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the commmon interrupts, used in both
-+ * device and host modes.
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ /* Clear any pending OTG Interrupts */
-+ DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF);
-+
-+ /* Clear any pending interrupts */
-+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /*
-+ * Enable the interrupts in the GINTMSK.
-+ */
-+ intr_mask.b.modemismatch = 1;
-+ intr_mask.b.otgintr = 1;
-+
-+ if (!core_if->dma_enable) {
-+ intr_mask.b.rxstsqlvl = 1;
-+ }
-+
-+ intr_mask.b.conidstschng = 1;
-+ intr_mask.b.wkupintr = 1;
-+ intr_mask.b.disconnect = 0;
-+ intr_mask.b.usbsuspend = 1;
-+ intr_mask.b.sessreqintr = 1;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ if (core_if->core_params->lpm_enable) {
-+ intr_mask.b.lpmtranrcvd = 1;
-+ }
-+#endif
-+ DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32);
-+}
-+
-+/*
-+ * The restore operation is modified to support Synopsys Emulated Powerdown and
-+ * Hibernation. This function is for exiting from Device mode hibernation by
-+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
-+ * @param reset - indicates whether resume is initiated by Reset.
-+ */
-+int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
-+ int rem_wakeup, int reset)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ dctl_data_t dctl = {.d32 = 0 };
-+
-+ int timeout = 2000;
-+
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__);
-+ /* Switch-on voltage to the core */
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Assert Restore signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.restore = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ if (rem_wakeup) {
-+ dwc_udelay(70);
-+ }
-+
-+ /* Deassert Reset core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Mask interrupts from gpwrdn */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.connect_det_msk = 1;
-+ gpwrdn.b.srp_det_msk = 1;
-+ gpwrdn.b.disconn_det_msk = 1;
-+ gpwrdn.b.rst_det_msk = 1;
-+ gpwrdn.b.lnstchng_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Indicates that we are going out from hibernation */
-+ core_if->hibernation_suspend = 0;
-+
-+ /*
-+ * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1
-+ * indicates restore from remote_wakeup
-+ */
-+ restore_essential_regs(core_if, rem_wakeup, 0);
-+
-+ /*
-+ * Wait a little for seeing new value of variable hibernation_suspend if
-+ * Restore done interrupt received before polling
-+ */
-+ dwc_udelay(10);
-+
-+ if (core_if->hibernation_suspend == 0) {
-+ /*
-+ * Wait For Restore_done Interrupt. This mechanism of polling the
-+ * interrupt is introduced to avoid any possible race conditions
-+ */
-+ do {
-+ gintsts_data_t gintsts;
-+ gintsts.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ if (gintsts.b.restoredone) {
-+ gintsts.d32 = 0;
-+ gintsts.b.restoredone = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->
-+ gintsts, gintsts.d32);
-+ DWC_PRINTF("Restore Done Interrupt seen\n");
-+ break;
-+ }
-+ dwc_udelay(10);
-+ } while (--timeout);
-+ if (!timeout) {
-+ DWC_PRINTF("Restore Done interrupt wasn't generated here\n");
-+ }
-+ }
-+ /* Clear all pending interupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* De-assert Restore */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.restore = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ if (!rem_wakeup) {
-+ pcgcctl.d32 = 0;
-+ pcgcctl.b.rstpdwnmodule = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ }
-+
-+ /* Restore GUSBCFG and DCFG */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
-+ core_if->gr_backup->gusbcfg_local);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
-+ core_if->dr_backup->dcfg);
-+
-+ /* De-assert Wakeup Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ if (!rem_wakeup) {
-+ /* Set Device programming done bit */
-+ dctl.b.pwronprgdone = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ } else {
-+ /* Start Remote Wakeup Signaling */
-+ dctl.d32 = core_if->dr_backup->dctl;
-+ dctl.b.rmtwkupsig = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-+ }
-+
-+ dwc_mdelay(2);
-+ /* Clear all pending interupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Restore global registers */
-+ dwc_otg_restore_global_regs(core_if);
-+ /* Restore device global registers */
-+ dwc_otg_restore_dev_regs(core_if, rem_wakeup);
-+
-+ if (rem_wakeup) {
-+ dwc_mdelay(7);
-+ dctl.d32 = 0;
-+ dctl.b.rmtwkupsig = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
-+ }
-+
-+ core_if->hibernation_suspend = 0;
-+ /* The core will be in ON STATE */
-+ core_if->lx_state = DWC_OTG_L0;
-+ DWC_PRINTF("Hibernation recovery completes here\n");
-+
-+ return 1;
-+}
-+
-+/*
-+ * The restore operation is modified to support Synopsys Emulated Powerdown and
-+ * Hibernation. This function is for exiting from Host mode hibernation by
-+ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
-+ * @param reset - indicates whether resume is initiated by Reset.
-+ */
-+int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
-+ int rem_wakeup, int reset)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+
-+ int timeout = 2000;
-+
-+ DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__);
-+ /* Switch-on voltage to the core */
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Assert Restore signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.restore = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ if (!rem_wakeup) {
-+ dwc_udelay(50);
-+ }
-+
-+ /* Deassert Reset core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.connect_det_msk = 1;
-+ gpwrdn.b.srp_det_msk = 1;
-+ gpwrdn.b.disconn_det_msk = 1;
-+ gpwrdn.b.rst_det_msk = 1;
-+ gpwrdn.b.lnstchng_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Indicates that we are going out from hibernation */
-+ core_if->hibernation_suspend = 0;
-+
-+ /* Set Restore Essential Regs bit in PCGCCTL register */
-+ restore_essential_regs(core_if, rem_wakeup, 1);
-+
-+ /* Wait a little for seeing new value of variable hibernation_suspend if
-+ * Restore done interrupt received before polling */
-+ dwc_udelay(10);
-+
-+ if (core_if->hibernation_suspend == 0) {
-+ /* Wait For Restore_done Interrupt. This mechanism of polling the
-+ * interrupt is introduced to avoid any possible race conditions
-+ */
-+ do {
-+ gintsts_data_t gintsts;
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ if (gintsts.b.restoredone) {
-+ gintsts.d32 = 0;
-+ gintsts.b.restoredone = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+ DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n");
-+ break;
-+ }
-+ dwc_udelay(10);
-+ } while (--timeout);
-+ if (!timeout) {
-+ DWC_WARN("Restore Done interrupt wasn't generated\n");
-+ }
-+ }
-+
-+ /* Set the flag's value to 0 again after receiving restore done interrupt */
-+ core_if->hibernation_suspend = 0;
-+
-+ /* This step is not described in functional spec but if not wait for this
-+ * delay, mismatch interrupts occurred because just after restore core is
-+ * in Device mode(gintsts.curmode == 0) */
-+ dwc_mdelay(100);
-+
-+ /* Clear all pending interrupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* De-assert Restore */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.restore = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Restore GUSBCFG and HCFG */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
-+ core_if->gr_backup->gusbcfg_local);
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
-+ core_if->hr_backup->hcfg_local);
-+
-+ /* De-assert Wakeup Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Start the Resume operation by programming HPRT0 */
-+ hprt0.d32 = core_if->hr_backup->hprt0_local;
-+ hprt0.b.prtpwr = 1;
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtsusp = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ DWC_PRINTF("Resume Starts Now\n");
-+ if (!reset) { // Indicates it is Resume Operation
-+ hprt0.d32 = core_if->hr_backup->hprt0_local;
-+ hprt0.b.prtres = 1;
-+ hprt0.b.prtpwr = 1;
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtsusp = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ if (!rem_wakeup)
-+ hprt0.b.prtres = 0;
-+ /* Wait for Resume time and then program HPRT again */
-+ dwc_mdelay(100);
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ } else { // Indicates it is Reset Operation
-+ hprt0.d32 = core_if->hr_backup->hprt0_local;
-+ hprt0.b.prtrst = 1;
-+ hprt0.b.prtpwr = 1;
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtsusp = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ /* Wait for Reset time and then program HPRT again */
-+ dwc_mdelay(60);
-+ hprt0.b.prtrst = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+ /* Clear all interrupt status */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtconndet = 1;
-+ hprt0.b.prtenchng = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Clear all pending interupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Restore global registers */
-+ dwc_otg_restore_global_regs(core_if);
-+ /* Restore host global registers */
-+ dwc_otg_restore_host_regs(core_if, reset);
-+
-+ /* The core will be in ON STATE */
-+ core_if->lx_state = DWC_OTG_L0;
-+ DWC_PRINTF("Hibernation recovery is complete here\n");
-+ return 0;
-+}
-+
-+/** Saves some register values into system memory. */
-+int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if)
-+{
-+ struct dwc_otg_global_regs_backup *gr;
-+ int i;
-+
-+ gr = core_if->gr_backup;
-+ if (!gr) {
-+ gr = DWC_ALLOC(sizeof(*gr));
-+ if (!gr) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ core_if->gr_backup = gr;
-+ }
-+
-+ gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-+ gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
-+ gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
-+ gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
-+ gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+#endif
-+ gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl);
-+ gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl);
-+ gr->gdfifocfg_local =
-+ DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg);
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ gr->dtxfsiz_local[i] =
-+ DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i]));
-+ }
-+
-+ DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n");
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl = %08x\n", gr->gotgctl_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg = %08x\n", gr->gahbcfg_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg = %08x\n", gr->gusbcfg_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz = %08x\n", gr->grxfsiz_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n",
-+ gr->gnptxfsiz_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz = %08x\n",
-+ gr->hptxfsiz_local);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg = %08x\n", gr->glpmcfg_local);
-+#endif
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl = %08x\n", gr->gi2cctl_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl = %08x\n", gr->pcgcctl_local);
-+ DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg = %08x\n",gr->gdfifocfg_local);
-+
-+ return 0;
-+}
-+
-+/** Saves GINTMSK register before setting the msk bits. */
-+int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if)
-+{
-+ struct dwc_otg_global_regs_backup *gr;
-+
-+ gr = core_if->gr_backup;
-+ if (!gr) {
-+ gr = DWC_ALLOC(sizeof(*gr));
-+ if (!gr) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ core_if->gr_backup = gr;
-+ }
-+
-+ gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-+
-+ DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n");
-+ DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk = %08x\n", gr->gintmsk_local);
-+
-+ return 0;
-+}
-+
-+int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if)
-+{
-+ struct dwc_otg_dev_regs_backup *dr;
-+ int i;
-+
-+ dr = core_if->dr_backup;
-+ if (!dr) {
-+ dr = DWC_ALLOC(sizeof(*dr));
-+ if (!dr) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ core_if->dr_backup = dr;
-+ }
-+
-+ dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
-+ dr->daintmsk =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ dr->diepmsk =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk);
-+ dr->doepmsk =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk);
-+
-+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ dr->diepctl[i] =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
-+ dr->dieptsiz[i] =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz);
-+ dr->diepdma[i] =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma);
-+ }
-+
-+ DWC_DEBUGPL(DBG_ANY,
-+ "=============Backing Host registers==============\n");
-+ DWC_DEBUGPL(DBG_ANY, "Backed up dcfg = %08x\n", dr->dcfg);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up dctl = %08x\n", dr->dctl);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk = %08x\n",
-+ dr->daintmsk);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk = %08x\n", dr->diepmsk);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk = %08x\n", dr->doepmsk);
-+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d] = %08x\n", i,
-+ dr->diepctl[i]);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d] = %08x\n",
-+ i, dr->dieptsiz[i]);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d] = %08x\n", i,
-+ dr->diepdma[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if)
-+{
-+ struct dwc_otg_host_regs_backup *hr;
-+ int i;
-+
-+ hr = core_if->hr_backup;
-+ if (!hr) {
-+ hr = DWC_ALLOC(sizeof(*hr));
-+ if (!hr) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ core_if->hr_backup = hr;
-+ }
-+
-+ hr->hcfg_local =
-+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
-+ hr->haintmsk_local =
-+ DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk);
-+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
-+ hr->hcintmsk_local[i] =
-+ DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk);
-+ }
-+ hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0);
-+ hr->hfir_local =
-+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
-+
-+ DWC_DEBUGPL(DBG_ANY,
-+ "=============Backing Host registers===============\n");
-+ DWC_DEBUGPL(DBG_ANY, "Backed up hcfg = %08x\n",
-+ hr->hcfg_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local);
-+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
-+ DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i,
-+ hr->hcintmsk_local[i]);
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "Backed up hprt0 = %08x\n",
-+ hr->hprt0_local);
-+ DWC_DEBUGPL(DBG_ANY, "Backed up hfir = %08x\n",
-+ hr->hfir_local);
-+
-+ return 0;
-+}
-+
-+int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if)
-+{
-+ struct dwc_otg_global_regs_backup *gr;
-+ int i;
-+
-+ gr = core_if->gr_backup;
-+ if (!gr) {
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz,
-+ gr->gnptxfsiz_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz,
-+ gr->hptxfsiz_local);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg,
-+ gr->gdfifocfg_local);
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i],
-+ gr->dtxfsiz_local[i]);
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg,
-+ (gr->gahbcfg_local));
-+ return 0;
-+}
-+
-+int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup)
-+{
-+ struct dwc_otg_dev_regs_backup *dr;
-+ int i;
-+
-+ dr = core_if->dr_backup;
-+
-+ if (!dr) {
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (!rem_wakeup) {
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
-+ dr->dctl);
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk);
-+
-+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]);
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]);
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset)
-+{
-+ struct dwc_otg_host_regs_backup *hr;
-+ int i;
-+ hr = core_if->hr_backup;
-+
-+ if (!hr) {
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local);
-+ //if (!reset)
-+ //{
-+ // DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local);
-+ //}
-+
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk,
-+ hr->haintmsk_local);
-+ for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
-+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk,
-+ hr->hcintmsk_local[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if)
-+{
-+ struct dwc_otg_global_regs_backup *gr;
-+
-+ gr = core_if->gr_backup;
-+
-+ /* Restore values for LPM and I2C */
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local);
-+#endif
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local);
-+
-+ return 0;
-+}
-+
-+int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host)
-+{
-+ struct dwc_otg_global_regs_backup *gr;
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ gahbcfg_data_t gahbcfg = {.d32 = 0 };
-+ gusbcfg_data_t gusbcfg = {.d32 = 0 };
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+
-+ /* Restore LPM and I2C registers */
-+ restore_lpm_i2c_regs(core_if);
-+
-+ /* Set PCGCCTL to 0 */
-+ DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000);
-+
-+ gr = core_if->gr_backup;
-+ /* Load restore values for [31:14] bits */
-+ DWC_WRITE_REG32(core_if->pcgcctl,
-+ ((gr->pcgcctl_local & 0xffffc000) | 0x00020000));
-+
-+ /* Umnask global Interrupt in GAHBCFG and restore it */
-+ gahbcfg.d32 = gr->gahbcfg_local;
-+ gahbcfg.b.glblintrmsk = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
-+
-+ /* Clear all pending interupts */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Unmask restore done interrupt */
-+ gintmsk.b.restoredone = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
-+
-+ /* Restore GUSBCFG and HCFG/DCFG */
-+ gusbcfg.d32 = core_if->gr_backup->gusbcfg_local;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
-+
-+ if (is_host) {
-+ hcfg_data_t hcfg = {.d32 = 0 };
-+ hcfg.d32 = core_if->hr_backup->hcfg_local;
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+
-+ /* Load restore values for [31:14] bits */
-+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
-+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
-+
-+ if (rmode)
-+ pcgcctl.b.restoremode = 1;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+ dwc_udelay(10);
-+
-+ /* Load restore values for [31:14] bits and set EssRegRestored bit */
-+ pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000;
-+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
-+ pcgcctl.b.ess_reg_restored = 1;
-+ if (rmode)
-+ pcgcctl.b.restoremode = 1;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+ } else {
-+ dcfg_data_t dcfg = {.d32 = 0 };
-+ dcfg.d32 = core_if->dr_backup->dcfg;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* Load restore values for [31:14] bits */
-+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
-+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
-+ if (!rmode) {
-+ pcgcctl.d32 |= 0x208;
-+ }
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+ dwc_udelay(10);
-+
-+ /* Load restore values for [31:14] bits */
-+ pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
-+ pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
-+ pcgcctl.b.ess_reg_restored = 1;
-+ if (!rmode)
-+ pcgcctl.d32 |= 0x208;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
-+ * type.
-+ */
-+static void init_fslspclksel(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t val;
-+ hcfg_data_t hcfg;
-+
-+ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) ||
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* Full speed PHY */
-+ val = DWC_HCFG_48_MHZ;
-+ } else {
-+ /* High speed PHY running at full speed or high speed */
-+ val = DWC_HCFG_30_60_MHZ;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
-+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
-+ hcfg.b.fslspclksel = val;
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+}
-+
-+/**
-+ * Initializes the DevSpd field of the DCFG register depending on the PHY type
-+ * and the enumeration speed of the device.
-+ */
-+static void init_devspd(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t val;
-+ dcfg_data_t dcfg;
-+
-+ if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) ||
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* Full speed PHY */
-+ val = 0x3;
-+ } else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-+ /* High speed PHY running at full speed */
-+ val = 0x1;
-+ } else {
-+ /* High speed PHY running at high speed */
-+ val = 0x0;
-+ }
-+
-+ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
-+
-+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devspd = val;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-+}
-+
-+/**
-+ * This function calculates the number of IN EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ */
-+static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t num_in_eps = 0;
-+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
-+ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
-+ int i;
-+
-+ for (i = 0; i < num_eps; ++i) {
-+ if (!(hwcfg1 & 0x1))
-+ num_in_eps++;
-+
-+ hwcfg1 >>= 2;
-+ }
-+
-+ if (core_if->hwcfg4.b.ded_fifo_en) {
-+ num_in_eps =
-+ (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
-+ }
-+
-+ return num_in_eps;
-+}
-+
-+/**
-+ * This function calculates the number of OUT EPS
-+ * using GHWCFG1 and GHWCFG2 registers values
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ */
-+static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t num_out_eps = 0;
-+ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
-+ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
-+ int i;
-+
-+ for (i = 0; i < num_eps; ++i) {
-+ if (!(hwcfg1 & 0x1))
-+ num_out_eps++;
-+
-+ hwcfg1 >>= 2;
-+ }
-+ return num_out_eps;
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers and
-+ * prepares the core for device mode or host mode operation.
-+ *
-+ * @param core_if Programming view of the DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_init(dwc_otg_core_if_t * core_if)
-+{
-+ int i = 0;
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ gahbcfg_data_t ahbcfg = {.d32 = 0 };
-+ gusbcfg_data_t usbcfg = {.d32 = 0 };
-+ gi2cctl_data_t i2cctl = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n",
-+ core_if, global_regs);
-+
-+ /* Common Initialization */
-+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+
-+ /* Program the ULPI External VBUS bit if needed */
-+ usbcfg.b.ulpi_ext_vbus_drv =
-+ (core_if->core_params->phy_ulpi_ext_vbus ==
-+ DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
-+
-+ /* Set external TS Dline pulsing */
-+ usbcfg.b.term_sel_dl_pulse =
-+ (core_if->core_params->ts_dline == 1) ? 1 : 0;
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset the Controller */
-+ dwc_otg_core_reset(core_if);
-+
-+ core_if->adp_enable = core_if->core_params->adp_supp_enable;
-+ core_if->power_down = core_if->core_params->power_down;
-+ core_if->otg_sts = 0;
-+
-+ /* Initialize parameters from Hardware configuration registers. */
-+ dev_if->num_in_eps = calc_num_in_eps(core_if);
-+ dev_if->num_out_eps = calc_num_out_eps(core_if);
-+
-+ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
-+ core_if->hwcfg4.b.num_dev_perio_in_ep);
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
-+ dev_if->perio_tx_fifo_size[i] =
-+ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
-+ i, dev_if->perio_tx_fifo_size[i]);
-+ }
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+ dev_if->tx_fifo_size[i] =
-+ DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
-+ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
-+ i, dev_if->tx_fifo_size[i]);
-+ }
-+
-+ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
-+ core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz);
-+ core_if->nperio_tx_fifo_size =
-+ DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16;
-+
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n",
-+ core_if->nperio_tx_fifo_size);
-+
-+ /* This programming sequence needs to happen in FS mode before any other
-+ * programming occurs */
-+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
-+ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
-+ /* If FS mode with FS PHY */
-+
-+ /* core_init() is now called on every switch so only call the
-+ * following for the first time through. */
-+ if (!core_if->phy_init_done) {
-+ core_if->phy_init_done = 1;
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
-+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+ usbcfg.b.physel = 1;
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Reset after a PHY select */
-+ dwc_otg_core_reset(core_if);
-+ }
-+
-+ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
-+ * do this on HNP Dev/Host mode switches (done in dev_init and
-+ * host_init). */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ init_fslspclksel(core_if);
-+ } else {
-+ init_devspd(core_if);
-+ }
-+
-+ if (core_if->core_params->i2c_enable) {
-+ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
-+ /* Program GUSBCFG.OtgUtmifsSel to I2C */
-+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+ usbcfg.b.otgutmifssel = 1;
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+ /* Program GI2CCTL.I2CEn */
-+ i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl);
-+ i2cctl.b.i2cdevaddr = 1;
-+ i2cctl.b.i2cen = 0;
-+ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
-+ i2cctl.b.i2cen = 1;
-+ DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
-+ }
-+
-+ } /* endif speed == DWC_SPEED_PARAM_FULL */
-+ else {
-+ /* High speed PHY. */
-+ if (!core_if->phy_init_done) {
-+ core_if->phy_init_done = 1;
-+ /* HS PHY parameters. These parameters are preserved
-+ * during soft reset so only program the first time. Do
-+ * a soft reset immediately after setting phyif. */
-+
-+ if (core_if->core_params->phy_type == 2) {
-+ /* ULPI interface */
-+ usbcfg.b.ulpi_utmi_sel = 1;
-+ usbcfg.b.phyif = 0;
-+ usbcfg.b.ddrsel =
-+ core_if->core_params->phy_ulpi_ddr;
-+ } else if (core_if->core_params->phy_type == 1) {
-+ /* UTMI+ interface */
-+ usbcfg.b.ulpi_utmi_sel = 0;
-+ if (core_if->core_params->phy_utmi_width == 16) {
-+ usbcfg.b.phyif = 1;
-+
-+ } else {
-+ usbcfg.b.phyif = 0;
-+ }
-+ } else {
-+ DWC_ERROR("FS PHY TYPE\n");
-+ }
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+ /* Reset after setting the PHY parameters */
-+ dwc_otg_core_reset(core_if);
-+ }
-+ }
-+
-+ if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls)) {
-+ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
-+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 1;
-+ usbcfg.b.ulpi_clk_sus_m = 1;
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+ } else {
-+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+ usbcfg.b.ulpi_fsls = 0;
-+ usbcfg.b.ulpi_clk_sus_m = 0;
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+ }
-+
-+ /* Program the GAHBCFG Register. */
-+ switch (core_if->hwcfg2.b.architecture) {
-+
-+ case DWC_SLAVE_ONLY_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
-+ ahbcfg.b.nptxfemplvl_txfemplvl =
-+ DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
-+ core_if->dma_enable = 0;
-+ core_if->dma_desc_enable = 0;
-+ break;
-+
-+ case DWC_EXT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
-+ {
-+ uint8_t brst_sz = core_if->core_params->dma_burst_size;
-+ ahbcfg.b.hburstlen = 0;
-+ while (brst_sz > 1) {
-+ ahbcfg.b.hburstlen++;
-+ brst_sz >>= 1;
-+ }
-+ }
-+ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-+ core_if->dma_desc_enable =
-+ (core_if->core_params->dma_desc_enable != 0);
-+ break;
-+
-+ case DWC_INT_DMA_ARCH:
-+ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
-+ /* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for
-+ Host mode ISOC in issue fix - vahrama */
-+ /* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */
-+ ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4;
-+ core_if->dma_enable = (core_if->core_params->dma_enable != 0);
-+ core_if->dma_desc_enable =
-+ (core_if->core_params->dma_desc_enable != 0);
-+ break;
-+
-+ }
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable) {
-+ DWC_PRINTF("Using Descriptor DMA mode\n");
-+ } else {
-+ DWC_PRINTF("Using Buffer DMA mode\n");
-+
-+ }
-+ } else {
-+ DWC_PRINTF("Using Slave mode\n");
-+ core_if->dma_desc_enable = 0;
-+ }
-+
-+ if (core_if->core_params->ahb_single) {
-+ ahbcfg.b.ahbsingle = 1;
-+ }
-+
-+ ahbcfg.b.dmaenable = core_if->dma_enable;
-+ DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32);
-+
-+ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
-+
-+ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
-+ core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
-+ DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n",
-+ ((core_if->pti_enh_enable) ? "enabled" : "disabled"));
-+ DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n",
-+ ((core_if->multiproc_int_enable) ? "enabled" : "disabled"));
-+
-+ /*
-+ * Program the GUSBCFG register.
-+ */
-+ usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+
-+ switch (core_if->hwcfg2.b.op_mode) {
-+ case DWC_MODE_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
-+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_SRP_ONLY_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_HNP_SRP_CAPABLE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+
-+ case DWC_MODE_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ break;
-+
-+ case DWC_MODE_NO_SRP_CAPABLE_HOST:
-+ usbcfg.b.hnpcap = 0;
-+ usbcfg.b.srpcap = 0;
-+ break;
-+ }
-+
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ if (core_if->core_params->lpm_enable) {
-+ glpmcfg_data_t lpmcfg = {.d32 = 0 };
-+
-+ /* To enable LPM support set lpm_cap_en bit */
-+ lpmcfg.b.lpm_cap_en = 1;
-+
-+ /* Make AppL1Res ACK */
-+ lpmcfg.b.appl_resp = 1;
-+
-+ /* Retry 3 times */
-+ lpmcfg.b.retry_count = 3;
-+
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg,
-+ 0, lpmcfg.d32);
-+
-+ }
-+#endif
-+ if (core_if->core_params->ic_usb_cap) {
-+ gusbcfg_data_t gusbcfg = {.d32 = 0 };
-+ gusbcfg.b.ic_usb_cap = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg,
-+ 0, gusbcfg.d32);
-+ }
-+ {
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+ gotgctl.b.otgver = core_if->core_params->otg_ver;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0,
-+ gotgctl.d32);
-+ /* Set OTG version supported */
-+ core_if->otg_ver = core_if->core_params->otg_ver;
-+ DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n",
-+ core_if->core_params->otg_ver, core_if->otg_ver);
-+ }
-+
-+
-+ /* Enable common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /* Do device or host intialization based on mode during PCD
-+ * and HCD initialization */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
-+ core_if->op_state = A_HOST;
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
-+ core_if->op_state = B_PERIPHERAL;
-+#ifdef DWC_DEVICE_ONLY
-+ dwc_otg_core_dev_init(core_if);
-+#endif
-+ }
-+}
-+
-+/**
-+ * This function enables the Device mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
-+
-+ /* Disable all interrupts. */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts */
-+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /* Enable interrupts */
-+ intr_mask.b.usbreset = 1;
-+ intr_mask.b.enumdone = 1;
-+ /* Disable Disconnect interrupt in Device mode */
-+ intr_mask.b.disconnect = 0;
-+
-+ if (!core_if->multiproc_int_enable) {
-+ intr_mask.b.inepintr = 1;
-+ intr_mask.b.outepintr = 1;
-+ }
-+
-+ intr_mask.b.erlysuspend = 1;
-+
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.epmismatch = 1;
-+ }
-+
-+ //intr_mask.b.incomplisoout = 1;
-+ intr_mask.b.incomplisoin = 1;
-+
-+/* Enable the ignore frame number for ISOC xfers - MAS */
-+/* Disable to support high bandwith ISOC transfers - manukz */
-+#if 0
-+#ifdef DWC_UTE_PER_IO
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable) {
-+ dctl_data_t dctl1 = {.d32 = 0 };
-+ dctl1.b.ifrmnum = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ dctl, 0, dctl1.d32);
-+ DWC_DEBUG("----Enabled Ignore frame number (0x%08x)",
-+ DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->dctl));
-+ }
-+ }
-+#endif
-+#endif
-+#ifdef DWC_EN_ISOC
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ if (core_if->pti_enh_enable) {
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dctl.b.ifrmnum = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ dev_if->dev_global_regs->dctl,
-+ 0, dctl.d32);
-+ } else {
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+ }
-+ }
-+ } else {
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ /** @todo NGS: Should this be a module parameter? */
-+#ifdef USE_PERIODIC_EP
-+ intr_mask.b.isooutdrop = 1;
-+ intr_mask.b.eopframe = 1;
-+ intr_mask.b.incomplisoin = 1;
-+ intr_mask.b.incomplisoout = 1;
-+#endif
-+
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
-+ DWC_READ_REG32(&global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * device mode.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if)
-+{
-+ int i;
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ dcfg_data_t dcfg = {.d32 = 0 };
-+ depctl_data_t diepctl = {.d32 = 0 };
-+ grstctl_t resetctl = {.d32 = 0 };
-+ uint32_t rx_fifo_size;
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t txfifosize;
-+ dthrctl_data_t dthrctl;
-+ fifosize_data_t ptxfifosize;
-+ uint16_t rxfsiz, nptxfsiz;
-+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
-+ hwcfg3_data_t hwcfg3 = {.d32 = 0 };
-+
-+ /* Restart the Phy Clock */
-+ DWC_WRITE_REG32(core_if->pcgcctl, 0);
-+
-+ /* Device configuration register */
-+ init_devspd(core_if);
-+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
-+ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
-+ /* Enable Device OUT NAK in case of DDMA mode*/
-+ if (core_if->core_params->dev_out_nak) {
-+ dcfg.b.endevoutnak = 1;
-+ }
-+
-+ if (core_if->core_params->cont_on_bna) {
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dctl.b.encontonbna = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ }
-+
-+
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
-+ core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
-+ params->dev_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
-+ params->dev_nperio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->grxfsiz));
-+
-+#ifdef DWC_UTE_CFI
-+ core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz);
-+ core_if->init_rxfsiz = params->dev_rx_fifo_size;
-+#endif
-+ rx_fifo_size = params->dev_rx_fifo_size;
-+ DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->grxfsiz));
-+
-+ /** Set Periodic Tx FIFO Mask all bits 0 */
-+ core_if->p_tx_msk = 0;
-+
-+ /** Set Tx FIFO Mask all bits 0 */
-+ core_if->tx_msk = 0;
-+
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxfsiz));
-+
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+
-+ DWC_WRITE_REG32(&global_regs->gnptxfsiz,
-+ nptxfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxfsiz));
-+
-+ /**@todo NGS: Fix Periodic FIFO Sizing! */
-+ /*
-+ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_perio_tx_fifo_size array and the FIFO size registers in
-+ * the dptxfsiz array run from 0 to 14.
-+ */
-+ /** @todo Finish debug of this */
-+ ptxfifosize.b.startaddr =
-+ nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
-+ ptxfifosize.b.depth =
-+ params->dev_perio_tx_fifo_size[i];
-+ DWC_DEBUGPL(DBG_CIL,
-+ "initial dtxfsiz[%d]=%08x\n", i,
-+ DWC_READ_REG32(&global_regs->dtxfsiz
-+ [i]));
-+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
-+ ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n",
-+ i,
-+ DWC_READ_REG32(&global_regs->dtxfsiz
-+ [i]));
-+ ptxfifosize.b.startaddr += ptxfifosize.b.depth;
-+ }
-+ } else {
-+ /*
-+ * Tx FIFOs These FIFOs are numbered from 1 to 15.
-+ * Indexes of the FIFO size module parameters in the
-+ * dev_tx_fifo_size array and the FIFO size registers in
-+ * the dtxfsiz array run from 0 to 14.
-+ */
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxfsiz));
-+
-+#ifdef DWC_UTE_CFI
-+ core_if->pwron_gnptxfsiz =
-+ (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
-+ core_if->init_gnptxfsiz =
-+ params->dev_nperio_tx_fifo_size;
-+#endif
-+ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
-+
-+ DWC_WRITE_REG32(&global_regs->gnptxfsiz,
-+ nptxfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxfsiz));
-+
-+ txfifosize.b.startaddr =
-+ nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
-+
-+ txfifosize.b.depth =
-+ params->dev_tx_fifo_size[i];
-+
-+ DWC_DEBUGPL(DBG_CIL,
-+ "initial dtxfsiz[%d]=%08x\n",
-+ i,
-+ DWC_READ_REG32(&global_regs->dtxfsiz
-+ [i]));
-+
-+#ifdef DWC_UTE_CFI
-+ core_if->pwron_txfsiz[i] =
-+ (DWC_READ_REG32
-+ (&global_regs->dtxfsiz[i]) >> 16);
-+ core_if->init_txfsiz[i] =
-+ params->dev_tx_fifo_size[i];
-+#endif
-+ DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
-+ txfifosize.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL,
-+ "new dtxfsiz[%d]=%08x\n",
-+ i,
-+ DWC_READ_REG32(&global_regs->dtxfsiz
-+ [i]));
-+
-+ txfifosize.b.startaddr += txfifosize.b.depth;
-+ }
-+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
-+ /* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */
-+ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
-+ hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3);
-+ gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16);
-+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
-+ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
-+ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
-+ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz;
-+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
-+ }
-+ }
-+
-+ /* Flush the FIFOs */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ /* Flush the Learning Queue. */
-+ resetctl.b.intknqflsh = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
-+ core_if->start_predict = 0;
-+ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
-+ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active
-+ }
-+ core_if->nextep_seq[0] = 0;
-+ core_if->first_in_nextep_seq = 0;
-+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
-+ diepctl.b.nextep = 0;
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-+
-+ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
-+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.epmscnt = 2;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
-+ __func__, core_if->first_in_nextep_seq);
-+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]);
-+ }
-+ DWC_DEBUGPL(DBG_CILV,"\n");
-+ }
-+
-+ /* Clear all pending Device Interrupts */
-+ /** @todo - if the condition needed to be checked
-+ * or in any case all pending interrutps should be cleared?
-+ */
-+ if (core_if->multiproc_int_enable) {
-+ for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
-+ DWC_WRITE_REG32(&dev_if->
-+ dev_global_regs->diepeachintmsk[i], 0);
-+ }
-+ }
-+
-+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
-+ DWC_WRITE_REG32(&dev_if->
-+ dev_global_regs->doepeachintmsk[i], 0);
-+ }
-+
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0);
-+ } else {
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0);
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0);
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0);
-+ }
-+
-+ for (i = 0; i <= dev_if->num_in_eps; i++) {
-+ depctl_data_t depctl;
-+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (depctl.b.epena) {
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ } else {
-+ depctl.d32 = 0;
-+ }
-+
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-+
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0);
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
-+ }
-+
-+ for (i = 0; i <= dev_if->num_out_eps; i++) {
-+ depctl_data_t depctl;
-+ depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
-+ if (depctl.b.epena) {
-+ dctl_data_t dctl = {.d32 = 0 };
-+ gintmsk_data_t gintsts = {.d32 = 0 };
-+ doepint_data_t doepint = {.d32 = 0 };
-+ dctl.b.sgoutnak = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ do {
-+ dwc_udelay(10);
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ } while (!gintsts.b.goutnakeff);
-+ gintsts.d32 = 0;
-+ gintsts.b.goutnakeff = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-+ do {
-+ dwc_udelay(10);
-+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[i]->doepint);
-+ } while (!doepint.b.epdisabled);
-+
-+ doepint.b.epdisabled = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32);
-+
-+ dctl.d32 = 0;
-+ dctl.b.cgoutnak = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ } else {
-+ depctl.d32 = 0;
-+ }
-+
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
-+
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0);
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
-+ }
-+
-+ if (core_if->en_multiple_tx_fifo && core_if->dma_enable) {
-+ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
-+ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
-+ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
-+
-+ dev_if->rx_thr_length = params->rx_thr_length;
-+ dev_if->tx_thr_length = params->tx_thr_length;
-+
-+ dev_if->setup_desc_index = 0;
-+
-+ dthrctl.d32 = 0;
-+ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
-+ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
-+ dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
-+ dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
-+ dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
-+ dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio;
-+
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl,
-+ dthrctl.d32);
-+
-+ DWC_DEBUGPL(DBG_CIL,
-+ "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
-+ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
-+ dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
-+ dthrctl.b.rx_thr_len);
-+
-+ }
-+
-+ dwc_otg_enable_device_interrupts(core_if);
-+
-+ {
-+ diepmsk_data_t msk = {.d32 = 0 };
-+ msk.b.txfifoundrn = 1;
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->
-+ diepeachintmsk[0], msk.d32, msk.d32);
-+ } else {
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk,
-+ msk.d32, msk.d32);
-+ }
-+ }
-+
-+ if (core_if->multiproc_int_enable) {
-+ /* Set NAK on Babble */
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dctl.b.nakonbble = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ }
-+
-+ if (core_if->snpsid >= OTG_CORE_REV_2_94a) {
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
-+ dctl.b.sftdiscon = 0;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function enables the Host mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if);
-+
-+ /* Disable all interrupts. */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, 0);
-+
-+ /* Clear any pending interrupts. */
-+ DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
-+
-+ /* Enable the common interrupts */
-+ dwc_otg_enable_common_interrupts(core_if);
-+
-+ /*
-+ * Enable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+
-+ intr_mask.b.disconnect = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+}
-+
-+/**
-+ * This function disables the Host Mode interrupts.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
-+
-+ /*
-+ * Disable host mode interrupts without disturbing common
-+ * interrupts.
-+ */
-+ intr_mask.b.sofintr = 1;
-+ intr_mask.b.portintr = 1;
-+ intr_mask.b.hcintr = 1;
-+ intr_mask.b.ptxfempty = 1;
-+ intr_mask.b.nptxfempty = 1;
-+
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0);
-+}
-+
-+/**
-+ * This function initializes the DWC_otg controller registers for
-+ * host mode.
-+ *
-+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
-+ * request queues. Host channels are reset to ensure that they are ready for
-+ * performing transfers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ *
-+ */
-+void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if = core_if->host_if;
-+ dwc_otg_core_params_t *params = core_if->core_params;
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+ fifosize_data_t nptxfifosize;
-+ fifosize_data_t ptxfifosize;
-+ uint16_t rxfsiz, nptxfsiz, hptxfsiz;
-+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
-+ int i;
-+ hcchar_data_t hcchar;
-+ hcfg_data_t hcfg;
-+ hfir_data_t hfir;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ int num_channels;
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
-+
-+ /* Restart the Phy Clock */
-+ DWC_WRITE_REG32(core_if->pcgcctl, 0);
-+
-+ /* Initialize Host Configuration Register */
-+ init_fslspclksel(core_if);
-+ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
-+ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
-+ hcfg.b.fslssupp = 1;
-+ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
-+
-+ }
-+
-+ /* This bit allows dynamic reloading of the HFIR register
-+ * during runtime. This bit needs to be programmed during
-+ * initial configuration and its value must not be changed
-+ * during runtime.*/
-+ if (core_if->core_params->reload_ctl == 1) {
-+ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
-+ hfir.b.hfirrldctrl = 1;
-+ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
-+ }
-+
-+ if (core_if->core_params->dma_desc_enable) {
-+ uint8_t op_mode = core_if->hwcfg2.b.op_mode;
-+ if (!
-+ (core_if->hwcfg4.b.desc_dma
-+ && (core_if->snpsid >= OTG_CORE_REV_2_90a)
-+ && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-+ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
-+ || (op_mode ==
-+ DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG)
-+ || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)
-+ || (op_mode ==
-+ DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) {
-+
-+ DWC_ERROR("Host can't operate in Descriptor DMA mode.\n"
-+ "Either core version is below 2.90a or "
-+ "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n"
-+ "To run the driver in Buffer DMA host mode set dma_desc_enable "
-+ "module parameter to 0.\n");
-+ return;
-+ }
-+ hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
-+ hcfg.b.descdma = 1;
-+ DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
-+ }
-+
-+ /* Configure data FIFO sizes */
-+ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
-+ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
-+ core_if->total_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
-+ params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
-+ params->host_nperio_tx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n",
-+ params->host_perio_tx_fifo_size);
-+
-+ /* Rx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->grxfsiz));
-+ DWC_WRITE_REG32(&global_regs->grxfsiz,
-+ params->host_rx_fifo_size);
-+ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->grxfsiz));
-+
-+ /* Non-periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxfsiz));
-+ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
-+ nptxfifosize.b.startaddr = params->host_rx_fifo_size;
-+ DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxfsiz));
-+
-+ /* Periodic Tx FIFO */
-+ DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->hptxfsiz));
-+ ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
-+ ptxfifosize.b.startaddr =
-+ nptxfifosize.b.startaddr + nptxfifosize.b.depth;
-+ DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32);
-+ DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n",
-+ DWC_READ_REG32(&global_regs->hptxfsiz));
-+
-+ if (core_if->en_multiple_tx_fifo
-+ && core_if->snpsid <= OTG_CORE_REV_2_94a) {
-+ /* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */
-+ gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
-+ rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
-+ nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
-+ hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16);
-+ gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz;
-+ DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
-+ }
-+ }
-+
-+ /* TODO - check this */
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
-+ /* Make sure the FIFOs are flushed. */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ );
-+ dwc_otg_flush_rx_fifo(core_if);
-+
-+ /* Clear Host Set HNP Enable in the OTG Control Register */
-+ gotgctl.b.hstsethnpen = 1;
-+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
-+
-+ if (!core_if->core_params->dma_desc_enable) {
-+ /* Flush out any leftover queued requests. */
-+ num_channels = core_if->core_params->host_channels;
-+
-+ for (i = 0; i < num_channels; i++) {
-+ hc_regs = core_if->host_if->hc_regs[i];
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+ }
-+
-+ /* Halt all channels to put them into a known state. */
-+ for (i = 0; i < num_channels; i++) {
-+ int count = 0;
-+ hc_regs = core_if->host_if->hc_regs[i];
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs);
-+ do {
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (++count > 1000) {
-+ DWC_ERROR
-+ ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n",
-+ __func__, i, hcchar.d32, &hc_regs->hcchar);
-+ break;
-+ }
-+ dwc_udelay(1);
-+ } while (hcchar.b.chen);
-+ }
-+ }
-+
-+ /* Turn on the vbus power. */
-+ DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state);
-+ if (core_if->op_state == A_HOST) {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr);
-+ if (hprt0.b.prtpwr == 0) {
-+ hprt0.b.prtpwr = 1;
-+ DWC_WRITE_REG32(host_if->hprt0, hprt0.d32);
-+ }
-+ }
-+
-+ dwc_otg_enable_host_interrupts(core_if);
-+}
-+
-+/**
-+ * Prepares a host channel for transferring packets to/from a specific
-+ * endpoint. The HCCHARn register is set up with the characteristics specified
-+ * in _hc. Host channel interrupts that may need to be serviced while this
-+ * transfer is in progress are enabled.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ * @param hc Information needed to initialize the host channel
-+ */
-+void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ hcintmsk_data_t hc_intr_mask;
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+
-+ uint8_t hc_num = hc->hc_num;
-+ dwc_otg_host_if_t *host_if = core_if->host_if;
-+ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
-+
-+ /* Clear old interrupt conditions for this host channel. */
-+ hc_intr_mask.d32 = 0xFFFFFFFF;
-+ hc_intr_mask.b.reserved14_31 = 0;
-+ DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32);
-+
-+ /* Enable channel interrupts required for this transfer. */
-+ hc_intr_mask.d32 = 0;
-+ hc_intr_mask.b.chhltd = 1;
-+ if (core_if->dma_enable) {
-+ /* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */
-+ if (!core_if->dma_desc_enable)
-+ hc_intr_mask.b.ahberr = 1;
-+ else {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
-+ hc_intr_mask.b.xfercompl = 1;
-+ }
-+
-+ if (hc->error_state && !hc->do_split &&
-+ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ hc_intr_mask.b.ack = 1;
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
-+ hc_intr_mask.b.nak = 1;
-+ }
-+ }
-+ }
-+ } else {
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ } else {
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.nyet = 1;
-+ if (hc->do_ping) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (hc->do_split) {
-+ hc_intr_mask.b.nak = 1;
-+ if (hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ } else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+
-+ if (hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_INTR:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.nak = 1;
-+ hc_intr_mask.b.stall = 1;
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.datatglerr = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ if (hc->error_state) {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ if (hc->do_split) {
-+ if (hc->complete_split) {
-+ hc_intr_mask.b.nyet = 1;
-+ } else {
-+ hc_intr_mask.b.ack = 1;
-+ }
-+ }
-+ break;
-+ case DWC_OTG_EP_TYPE_ISOC:
-+ hc_intr_mask.b.xfercompl = 1;
-+ hc_intr_mask.b.frmovrun = 1;
-+ hc_intr_mask.b.ack = 1;
-+
-+ if (hc->ep_is_in) {
-+ hc_intr_mask.b.xacterr = 1;
-+ hc_intr_mask.b.bblerr = 1;
-+ }
-+ break;
-+ }
-+ }
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32);
-+
-+ /*
-+ * Program the HCCHARn register with the endpoint characteristics for
-+ * the current transfer.
-+ */
-+ hcchar.d32 = 0;
-+ hcchar.b.devaddr = hc->dev_addr;
-+ hcchar.b.epnum = hc->ep_num;
-+ hcchar.b.epdir = hc->ep_is_in;
-+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
-+ hcchar.b.eptype = hc->ep_type;
-+ hcchar.b.mps = hc->max_packet;
-+
-+ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n",
-+ __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Is In %d, Is Low Speed %d, EP Type %d, "
-+ "Max Pkt %d, Multi Cnt %d\n",
-+ hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype,
-+ hcchar.b.mps, hcchar.b.multicnt);
-+
-+ /*
-+ * Program the HCSPLIT register for SPLITs
-+ */
-+ hcsplt.d32 = 0;
-+ if (hc->do_split) {
-+ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n",
-+ hc->hc_num,
-+ hc->complete_split ? "CSPLIT" : "SSPLIT");
-+ hcsplt.b.compsplt = hc->complete_split;
-+ hcsplt.b.xactpos = hc->xact_pos;
-+ hcsplt.b.hubaddr = hc->hub_addr;
-+ hcsplt.b.prtaddr = hc->port_addr;
-+ DWC_DEBUGPL(DBG_HCDV, "\t comp split %d\n", hc->complete_split);
-+ DWC_DEBUGPL(DBG_HCDV, "\t xact pos %d\n", hc->xact_pos);
-+ DWC_DEBUGPL(DBG_HCDV, "\t hub addr %d\n", hc->hub_addr);
-+ DWC_DEBUGPL(DBG_HCDV, "\t port addr %d\n", hc->port_addr);
-+ DWC_DEBUGPL(DBG_HCDV, "\t is_in %d\n", hc->ep_is_in);
-+ DWC_DEBUGPL(DBG_HCDV, "\t Max Pkt: %d\n", hcchar.b.mps);
-+ DWC_DEBUGPL(DBG_HCDV, "\t xferlen: %d\n", hc->xfer_len);
-+ }
-+ DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
-+
-+}
-+
-+/**
-+ * Attempts to halt a host channel. This function should only be called in
-+ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
-+ * normal circumstances in DMA mode, the controller halts the channel when the
-+ * transfer is complete or a condition occurs that requires application
-+ * intervention.
-+ *
-+ * In slave mode, checks for a free request queue entry, then sets the Channel
-+ * Enable and Channel Disable bits of the Host Channel Characteristics
-+ * register of the specified channel to intiate the halt. If there is no free
-+ * request queue entry, sets only the Channel Disable bit of the HCCHARn
-+ * register to flush requests for this channel. In the latter case, sets a
-+ * flag to indicate that the host channel needs to be halted when a request
-+ * queue slot is open.
-+ *
-+ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
-+ * HCCHARn register. The controller ensures there is space in the request
-+ * queue before submitting the halt request.
-+ *
-+ * Some time may elapse before the core flushes any posted requests for this
-+ * host channel and halts. The Channel Halted interrupt handler completes the
-+ * deactivation of the host channel.
-+ *
-+ * @param core_if Controller register interface.
-+ * @param hc Host channel to halt.
-+ * @param halt_status Reason for halting the channel.
-+ */
-+void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if,
-+ dwc_hc_t * hc, dwc_otg_halt_status_e halt_status)
-+{
-+ gnptxsts_data_t nptxsts;
-+ hptxsts_data_t hptxsts;
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_core_global_regs_t *global_regs;
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ global_regs = core_if->core_global_regs;
-+ host_global_regs = core_if->host_if->host_global_regs;
-+
-+ DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS),
-+ "halt_status = %d\n", halt_status);
-+
-+ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ /*
-+ * Disable all channel interrupts except Ch Halted. The QTD
-+ * and QH state associated with this transfer has been cleared
-+ * (in the case of URB_DEQUEUE), so the channel needs to be
-+ * shut down carefully to prevent crashes.
-+ */
-+ hcintmsk_data_t hcintmsk;
-+ hcintmsk.d32 = 0;
-+ hcintmsk.b.chhltd = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32);
-+
-+ /*
-+ * Make sure no other interrupts besides halt are currently
-+ * pending. Handling another interrupt could cause a crash due
-+ * to the QTD and QH state.
-+ */
-+ DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32);
-+
-+ /*
-+ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
-+ * even if the channel was already halted for some other
-+ * reason.
-+ */
-+ hc->halt_status = halt_status;
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chen == 0) {
-+ /*
-+ * The channel is either already halted or it hasn't
-+ * started yet. In DMA mode, the transfer may halt if
-+ * it finishes normally or a condition occurs that
-+ * requires driver intervention. Don't want to halt
-+ * the channel again. In either Slave or DMA mode,
-+ * it's possible that the transfer has been assigned
-+ * to a channel, but not started yet when an URB is
-+ * dequeued. Don't want to halt a channel that hasn't
-+ * started yet.
-+ */
-+ return;
-+ }
-+ }
-+ if (hc->halt_pending) {
-+ /*
-+ * A halt has already been issued for this channel. This might
-+ * happen when a transfer is aborted by a higher level in
-+ * the stack.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINTF
-+ ("*** %s: Channel %d, _hc->halt_pending already set ***\n",
-+ __func__, hc->hc_num);
-+
-+#endif
-+ return;
-+ }
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* No need to set the bit in DDMA for disabling the channel */
-+ //TODO check it everywhere channel is disabled
-+ if (!core_if->core_params->dma_desc_enable)
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 1;
-+
-+ if (!core_if->dma_enable) {
-+ /* Check for space in the request queue to issue the halt. */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
-+ if (nptxsts.b.nptxqspcavail == 0) {
-+ hcchar.b.chen = 0;
-+ }
-+ } else {
-+ hptxsts.d32 =
-+ DWC_READ_REG32(&host_global_regs->hptxsts);
-+ if ((hptxsts.b.ptxqspcavail == 0)
-+ || (core_if->queuing_high_bandwidth)) {
-+ hcchar.b.chen = 0;
-+ }
-+ }
-+ }
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->halt_status = halt_status;
-+
-+ if (hcchar.b.chen) {
-+ hc->halt_pending = 1;
-+ hc->halt_on_queue = 0;
-+ } else {
-+ hc->halt_on_queue = 1;
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status);
-+
-+ return;
-+}
-+
-+/**
-+ * Clears the transfer state for a host channel. This function is normally
-+ * called after a transfer is done and the host channel is being released.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Identifies the host channel to clean up.
-+ */
-+void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ dwc_otg_hc_regs_t *hc_regs;
-+
-+ hc->xfer_started = 0;
-+
-+ /*
-+ * Clear channel interrupt enables and any unhandled channel interrupt
-+ * conditions.
-+ */
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0);
-+ DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF);
-+#ifdef DEBUG
-+ DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]);
-+#endif
-+}
-+
-+/**
-+ * Sets the channel property that indicates in which frame a periodic transfer
-+ * should occur. This is always set to the _next_ frame. This function has no
-+ * effect on non-periodic transfers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Identifies the host channel to set up and its properties.
-+ * @param hcchar Current value of the HCCHAR register for the specified host
-+ * channel.
-+ */
-+static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if,
-+ dwc_hc_t * hc, hcchar_data_t * hcchar)
-+{
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hfnum_data_t hfnum;
-+ hfnum.d32 =
-+ DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum);
-+
-+ /* 1 if _next_ frame is odd, 0 if it's even */
-+ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+#ifdef DEBUG
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split
-+ && !hc->complete_split) {
-+ switch (hfnum.b.frnum & 0x7) {
-+ case 7:
-+ core_if->hfnum_7_samples++;
-+ core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
-+ break;
-+ case 0:
-+ core_if->hfnum_0_samples++;
-+ core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
-+ break;
-+ default:
-+ core_if->hfnum_other_samples++;
-+ core_if->hfnum_other_frrem_accum +=
-+ hfnum.b.frrem;
-+ break;
-+ }
-+ }
-+#endif
-+ }
-+}
-+
-+#ifdef DEBUG
-+void hc_xfer_timeout(void *ptr)
-+{
-+ hc_xfer_info_t *xfer_info = NULL;
-+ int hc_num = 0;
-+
-+ if (ptr)
-+ xfer_info = (hc_xfer_info_t *) ptr;
-+
-+ if (!xfer_info->hc) {
-+ DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc);
-+ return;
-+ }
-+
-+ hc_num = xfer_info->hc->hc_num;
-+ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
-+ DWC_WARN(" start_hcchar_val 0x%08x\n",
-+ xfer_info->core_if->start_hcchar_val[hc_num]);
-+}
-+#endif
-+
-+void ep_xfer_timeout(void *ptr)
-+{
-+ ep_xfer_info_t *xfer_info = NULL;
-+ int ep_num = 0;
-+ dctl_data_t dctl = {.d32 = 0 };
-+ gintsts_data_t gintsts = {.d32 = 0 };
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+
-+ if (ptr)
-+ xfer_info = (ep_xfer_info_t *) ptr;
-+
-+ if (!xfer_info->ep) {
-+ DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep);
-+ return;
-+ }
-+
-+ ep_num = xfer_info->ep->num;
-+ DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num);
-+ /* Put the sate to 2 as it was time outed */
-+ xfer_info->state = 2;
-+
-+ dctl.d32 =
-+ DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl);
-+ gintsts.d32 =
-+ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts);
-+ gintmsk.d32 =
-+ DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk);
-+
-+ if (!gintmsk.b.goutnakeff) {
-+ /* Unmask it */
-+ gintmsk.b.goutnakeff = 1;
-+ DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk,
-+ gintmsk.d32);
-+
-+ }
-+
-+ if (!gintsts.b.goutnakeff) {
-+ dctl.b.sgoutnak = 1;
-+ }
-+ DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32);
-+
-+}
-+
-+void set_pid_isoc(dwc_hc_t * hc)
-+{
-+ /* Set up the initial PID for the transfer. */
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
-+ if (hc->ep_is_in) {
-+ if (hc->multi_count == 1) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ } else if (hc->multi_count == 2) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+ } else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
-+ }
-+ } else {
-+ if (hc->multi_count == 1) {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
-+ }
-+ }
-+ } else {
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for a host channel and
-+ * starts the transfer. May be called in either Slave mode or DMA mode. In
-+ * Slave mode, the caller must ensure that there is sufficient space in the
-+ * request queue and Tx Data FIFO.
-+ *
-+ * For an OUT transfer in Slave mode, it loads a data packet into the
-+ * appropriate FIFO. If necessary, additional data packets will be loaded in
-+ * the Host ISR.
-+ *
-+ * For an IN transfer in Slave mode, a data packet is requested. The data
-+ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
-+ * additional data packets are requested in the Host ISR.
-+ *
-+ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
-+ * register along with a packet count of 1 and the channel is enabled. This
-+ * causes a single PING transaction to occur. Other fields in HCTSIZ are
-+ * simply set to 0 since no data transfer occurs in this case.
-+ *
-+ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
-+ * all the information required to perform the subsequent data transfer. In
-+ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
-+ * controller performs the entire PING protocol, then starts the data
-+ * transfer.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Information needed to initialize the host channel. The xfer_len
-+ * value may be reduced to accommodate the max widths of the XferSize and
-+ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
-+ * to reflect the final xfer_len value.
-+ */
-+void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ uint16_t num_packets;
-+ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
-+ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ hctsiz.d32 = 0;
-+
-+ if (hc->do_ping) {
-+ if (!core_if->dma_enable) {
-+ dwc_otg_hc_do_ping(core_if, hc);
-+ hc->xfer_started = 1;
-+ return;
-+ } else {
-+ hctsiz.b.dopng = 1;
-+ }
-+ }
-+
-+ if (hc->do_split) {
-+ num_packets = 1;
-+
-+ if (hc->complete_split && !hc->ep_is_in) {
-+ /* For CSPLIT OUT Transfer, set the size to 0 so the
-+ * core doesn't expect any data written to the FIFO */
-+ hc->xfer_len = 0;
-+ } else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
-+ hc->xfer_len = hc->max_packet;
-+ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
-+ hc->xfer_len = 188;
-+ }
-+
-+ hctsiz.b.xfersize = hc->xfer_len;
-+ } else {
-+ /*
-+ * Ensure that the transfer length and packet count will fit
-+ * in the widths allocated for them in the HCTSIZn register.
-+ */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure the transfer size is no larger than one
-+ * (micro)frame's worth of data. (A check was done
-+ * when the periodic transfer was accepted to ensure
-+ * that a (micro)frame's worth of data can be
-+ * programmed into a channel.)
-+ */
-+ uint32_t max_periodic_len =
-+ hc->multi_count * hc->max_packet;
-+ if (hc->xfer_len > max_periodic_len) {
-+ hc->xfer_len = max_periodic_len;
-+ } else {
-+ }
-+ } else if (hc->xfer_len > max_hc_xfer_size) {
-+ /* Make sure that xfer_len is a multiple of max packet size. */
-+ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
-+ }
-+
-+ if (hc->xfer_len > 0) {
-+ num_packets =
-+ (hc->xfer_len + hc->max_packet -
-+ 1) / hc->max_packet;
-+ if (num_packets > max_hc_pkt_count) {
-+ num_packets = max_hc_pkt_count;
-+ hc->xfer_len = num_packets * hc->max_packet;
-+ }
-+ } else {
-+ /* Need 1 packet for transfer length of 0. */
-+ num_packets = 1;
-+ }
-+
-+ if (hc->ep_is_in) {
-+ /* Always program an integral # of max packets for IN transfers. */
-+ hc->xfer_len = num_packets * hc->max_packet;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * Make sure that the multi_count field matches the
-+ * actual transfer length.
-+ */
-+ hc->multi_count = num_packets;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
-+ set_pid_isoc(hc);
-+
-+ hctsiz.b.xfersize = hc->xfer_len;
-+ }
-+
-+ hc->start_pkt_count = num_packets;
-+ hctsiz.b.pktcnt = num_packets;
-+ hctsiz.b.pid = hc->data_pid_start;
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-+
-+ if (core_if->dma_enable) {
-+ dwc_dma_t dma_addr;
-+ if (hc->align_buff) {
-+ dma_addr = hc->align_buff;
-+ } else {
-+ dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff);
-+ }
-+ DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr);
-+ }
-+
-+ /* Start the split */
-+ if (hc->do_split) {
-+ hcsplt_data_t hcsplt;
-+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
-+ hcsplt.b.spltena = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32);
-+ }
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.multicnt = hc->multi_count;
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+#ifdef DEBUG
-+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, hc->hc_num, hcchar.d32);
-+ }
-+#endif
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->xfer_started = 1;
-+ hc->requests++;
-+
-+ if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) {
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(core_if, hc);
-+ }
-+#ifdef DEBUG
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
-+ DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n",
-+ hc->hc_num, core_if);//GRAYG
-+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
-+ core_if->hc_xfer_info[hc->hc_num].hc = hc;
-+
-+ /* Start a timer for this transfer. */
-+ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
-+ }
-+#endif
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for a host channel
-+ * and starts the transfer in Descriptor DMA mode.
-+ *
-+ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
-+ * Sets PID and NTD values. For periodic transfers
-+ * initializes SCHED_INFO field with micro-frame bitmap.
-+ *
-+ * Initializes HCDMA register with descriptor list address and CTD value
-+ * then starts the transfer via enabling the channel.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param hc Information needed to initialize the host channel.
-+ */
-+void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcdma_data_t hcdma;
-+
-+ hctsiz.d32 = 0;
-+
-+ if (hc->do_ping)
-+ hctsiz.b_ddma.dopng = 1;
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
-+ set_pid_isoc(hc);
-+
-+ /* Packet Count and Xfer Size are not used in Descriptor DMA mode */
-+ hctsiz.b_ddma.pid = hc->data_pid_start;
-+ hctsiz.b_ddma.ntd = hc->ntd - 1; /* 0 - 1 descriptor, 1 - 2 descriptors, etc. */
-+ hctsiz.b_ddma.schinfo = hc->schinfo; /* Non-zero only for high-speed interrupt endpoints */
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid);
-+ DWC_DEBUGPL(DBG_HCDV, " NTD: %d\n", hctsiz.b_ddma.ntd);
-+
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ hcdma.d32 = 0;
-+ hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11;
-+
-+ /* Always start from first descriptor. */
-+ hcdma.b.ctd = 0;
-+ DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32);
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.multicnt = hc->multi_count;
-+
-+#ifdef DEBUG
-+ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
-+ __func__, hc->hc_num, hcchar.d32);
-+ }
-+#endif
-+
-+ /* Set host channel enable after all other setup is complete. */
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+
-+ hc->xfer_started = 1;
-+ hc->requests++;
-+
-+#ifdef DEBUG
-+ if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR)
-+ && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) {
-+ DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n",
-+ hc->hc_num, core_if);//GRAYG
-+ core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
-+ core_if->hc_xfer_info[hc->hc_num].hc = hc;
-+ /* Start a timer for this transfer. */
-+ DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
-+ }
-+#endif
-+
-+}
-+
-+/**
-+ * This function continues a data transfer that was started by previous call
-+ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
-+ * sufficient space in the request queue and Tx Data FIFO. This function
-+ * should only be called in Slave mode. In DMA mode, the controller acts
-+ * autonomously to complete transfers programmed to a host channel.
-+ *
-+ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
-+ * if there is any data remaining to be queued. For an IN transfer, another
-+ * data packet is always requested. For the SETUP phase of a control transfer,
-+ * this function does nothing.
-+ *
-+ * @return 1 if a new request is queued, 0 if no more requests are required
-+ * for this transfer.
-+ */
-+int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+
-+ if (hc->do_split) {
-+ /* SPLITs always queue just once per channel */
-+ return 0;
-+ } else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ /* SETUPs are queued only once since they can't be NAKed. */
-+ return 0;
-+ } else if (hc->ep_is_in) {
-+ /*
-+ * Always queue another request for other IN transfers. If
-+ * back-to-back INs are issued and NAKs are received for both,
-+ * the driver may still be processing the first NAK when the
-+ * second NAK is received. When the interrupt handler clears
-+ * the NAK interrupt for the first NAK, the second NAK will
-+ * not be seen. So we can't depend on the NAK interrupt
-+ * handler to requeue a NAKed request. Instead, IN requests
-+ * are issued each time this function is called. When the
-+ * transfer completes, the extra requests for the channel will
-+ * be flushed.
-+ */
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs =
-+ core_if->host_if->hc_regs[hc->hc_num];
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n",
-+ hcchar.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+ hc->requests++;
-+ return 1;
-+ } else {
-+ /* OUT transfers. */
-+ if (hc->xfer_count < hc->xfer_len) {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ hcchar_data_t hcchar;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hc_set_even_odd_frame(core_if, hc, &hcchar);
-+ }
-+
-+ /* Load OUT packet into the appropriate Tx FIFO. */
-+ dwc_otg_hc_write_packet(core_if, hc);
-+ hc->requests++;
-+ return 1;
-+ } else {
-+ return 0;
-+ }
-+ }
-+}
-+
-+/**
-+ * Starts a PING transfer. This function should only be called in Slave mode.
-+ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
-+ */
-+void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
-+
-+ hctsiz.d32 = 0;
-+ hctsiz.b.dopng = 1;
-+ hctsiz.b.pktcnt = 1;
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.chen = 1;
-+ hcchar.b.chdis = 0;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+}
-+
-+/*
-+ * This function writes a packet into the Tx FIFO associated with the Host
-+ * Channel. For a channel associated with a non-periodic EP, the non-periodic
-+ * Tx FIFO is written. For a channel associated with a periodic EP, the
-+ * periodic Tx FIFO is written. This function should only be called in Slave
-+ * mode.
-+ *
-+ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
-+ * then number of bytes written to the Tx FIFO.
-+ */
-+void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
-+{
-+ uint32_t i;
-+ uint32_t remaining_count;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+
-+ uint32_t *data_buff = (uint32_t *) (hc->xfer_buff);
-+ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
-+
-+ remaining_count = hc->xfer_len - hc->xfer_count;
-+ if (remaining_count > hc->max_packet) {
-+ byte_count = hc->max_packet;
-+ } else {
-+ byte_count = remaining_count;
-+ }
-+
-+ dword_count = (byte_count + 3) / 4;
-+
-+ if ((((unsigned long)data_buff) & 0x3) == 0) {
-+ /* xfer_buff is DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++) {
-+ DWC_WRITE_REG32(data_fifo, *data_buff);
-+ }
-+ } else {
-+ /* xfer_buff is not DWORD aligned. */
-+ for (i = 0; i < dword_count; i++, data_buff++) {
-+ uint32_t data;
-+ data =
-+ (data_buff[0] | data_buff[1] << 8 | data_buff[2] <<
-+ 16 | data_buff[3] << 24);
-+ DWC_WRITE_REG32(data_fifo, data);
-+ }
-+ }
-+
-+ hc->xfer_count += byte_count;
-+ hc->xfer_buff += byte_count;
-+}
-+
-+/**
-+ * Gets the current USB frame number. This is the frame number from the last
-+ * SOF packet.
-+ */
-+uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if)
-+{
-+ dsts_data_t dsts;
-+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ /* read current frame/microframe number from DSTS register */
-+ return dsts.b.soffn;
-+}
-+
-+/**
-+ * Calculates and gets the frame Interval value of HFIR register according PHY
-+ * type and speed.The application can modify a value of HFIR register only after
-+ * the Port Enable bit of the Host Port Control and Status register
-+ * (HPRT.PrtEnaPort) has been set.
-+*/
-+
-+uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if)
-+{
-+ gusbcfg_data_t usbcfg;
-+ hwcfg2_data_t hwcfg2;
-+ hprt0_data_t hprt0;
-+ int clock = 60; // default value
-+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
-+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
-+ if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
-+ clock = 60;
-+ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3)
-+ clock = 48;
-+ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
-+ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
-+ clock = 30;
-+ if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
-+ !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
-+ clock = 60;
-+ if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
-+ !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
-+ clock = 48;
-+ if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2)
-+ clock = 48;
-+ if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1)
-+ clock = 48;
-+ if (hprt0.b.prtspd == 0)
-+ /* High speed case */
-+ return 125 * clock - 1;
-+ else
-+ /* FS/LS case */
-+ return 1000 * clock - 1;
-+}
-+
-+/**
-+ * This function reads a setup packet from the Rx FIFO into the destination
-+ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
-+ * Interrupt routine when a SETUP packet has been received in Slave mode.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dest Destination buffer for packet data.
-+ */
-+void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest)
-+{
-+ device_grxsts_data_t status;
-+ /* Get the 8 bytes of a setup transaction data */
-+
-+ /* Pop 2 DWORDS off the receive data FIFO into memory */
-+ dest[0] = DWC_READ_REG32(core_if->data_fifo[0]);
-+ dest[1] = DWC_READ_REG32(core_if->data_fifo[0]);
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ status.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->grxstsp);
-+ DWC_DEBUGPL(DBG_ANY,
-+ "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n",
-+ status.b.epnum, status.b.bcnt, status.b.pktsts,
-+ status.b.fn, status.b.fn);
-+ }
-+}
-+
-+/**
-+ * This function enables EP0 OUT to receive SETUP packets and configures EP0
-+ * IN for transmitting packets. It is normally called when the
-+ * "Enumeration Done" interrupt occurs.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dsts_data_t dsts;
-+ depctl_data_t diepctl;
-+ depctl_data_t doepctl;
-+ dctl_data_t dctl = {.d32 = 0 };
-+
-+ ep->stp_rollover = 0;
-+ /* Read the Device Status and Endpoint 0 Control registers */
-+ dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts);
-+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
-+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
-+
-+ /* Set the MPS of the IN EP based on the enumeration speed */
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_64;
-+ break;
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ diepctl.b.mps = DWC_DEP0CTL_MPS_8;
-+ break;
-+ }
-+
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-+
-+ /* Enable OUT EP for receive */
-+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
-+ doepctl.b.epena = 1;
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+ }
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
-+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
-+ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+ dctl.b.cgnpinnak = 1;
-+
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n",
-+ DWC_READ_REG32(&dev_if->dev_global_regs->dctl));
-+
-+}
-+
-+/**
-+ * This function activates an EP. The Device EP control register for
-+ * the EP is configured as defined in the ep structure. Note: This
-+ * function is not used for EP0.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to activate.
-+ */
-+void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ depctl_data_t depctl;
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = {.d32 = 0 };
-+ dcfg_data_t dcfg;
-+ uint8_t i;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
-+ (ep->is_in ? "IN" : "OUT"));
-+
-+#ifdef DWC_UTE_PER_IO
-+ ep->xiso_frame_num = 0xFFFFFFFF;
-+ ep->xiso_active_xfers = 0;
-+ ep->xiso_queued_xfers = 0;
-+#endif
-+ /* Read DEPCTLn register */
-+ if (ep->is_in == 1) {
-+ addr = &dev_if->in_ep_regs[ep->num]->diepctl;
-+ daintmsk.ep.in = 1 << ep->num;
-+ } else {
-+ addr = &dev_if->out_ep_regs[ep->num]->doepctl;
-+ daintmsk.ep.out = 1 << ep->num;
-+ }
-+
-+ /* If the EP is already active don't change the EP Control
-+ * register. */
-+ depctl.d32 = DWC_READ_REG32(addr);
-+ if (!depctl.b.usbactep) {
-+ depctl.b.mps = ep->maxpacket;
-+ depctl.b.eptype = ep->type;
-+ depctl.b.txfnum = ep->tx_fifo_num;
-+
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ depctl.b.setd0pid = 1; // ???
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ depctl.b.usbactep = 1;
-+
-+ /* Update nextep_seq array and EPMSCNT in DCFG*/
-+ if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) { // NP IN EP
-+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
-+ if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq)
-+ break;
-+ }
-+ core_if->nextep_seq[i] = ep->num;
-+ core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq;
-+ depctl.b.nextep = core_if->nextep_seq[ep->num];
-+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.epmscnt++;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
-+ __func__, core_if->first_in_nextep_seq);
-+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_DEBUGPL(DBG_PCDV, "%2d\n",
-+ core_if->nextep_seq[i]);
-+ }
-+
-+ }
-+
-+
-+ DWC_WRITE_REG32(addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr));
-+ }
-+
-+ /* Enable the Interrupt for this EP */
-+ if (core_if->multiproc_int_enable) {
-+ if (ep->is_in == 1) {
-+ diepmsk_data_t diepmsk = {.d32 = 0 };
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
-+ diepmsk.b.intknepmis = 0;
-+ diepmsk.b.txfifoundrn = 1; //?????
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ diepmsk.b.nak = 1;
-+ }
-+
-+
-+
-+/*
-+ if (core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+*/
-+/*
-+ if (core_if->dma_enable) {
-+ doepmsk.b.nak = 1;
-+ }
-+*/
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->
-+ diepeachintmsk[ep->num], diepmsk.d32);
-+
-+ } else {
-+ doepmsk_data_t doepmsk = {.d32 = 0 };
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC)
-+ doepmsk.b.outtknepdis = 1;
-+
-+/*
-+
-+ if (core_if->dma_desc_enable) {
-+ doepmsk.b.bna = 1;
-+ }
-+*/
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+ doepmsk.b.nak = 1;
-+*/
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->
-+ doepeachintmsk[ep->num], doepmsk.d32);
-+ }
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk,
-+ 0, daintmsk.d32);
-+ } else {
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (ep->is_in) {
-+ diepmsk_data_t diepmsk = {.d32 = 0 };
-+ diepmsk.b.nak = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
-+ } else {
-+ doepmsk_data_t doepmsk = {.d32 = 0 };
-+ doepmsk.b.outtknepdis = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32);
-+ }
-+ }
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk,
-+ 0, daintmsk.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n",
-+ DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk));
-+
-+ ep->stall_clear_flag = 0;
-+
-+ return;
-+}
-+
-+/**
-+ * This function deactivates an EP. This is done by clearing the USB Active
-+ * EP bit in the Device EP control register. Note: This function is not used
-+ * for EP0. EP0 cannot be deactivated.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to deactivate.
-+ */
-+void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl = {.d32 = 0 };
-+ volatile uint32_t *addr;
-+ daint_data_t daintmsk = {.d32 = 0 };
-+ dcfg_data_t dcfg;
-+ uint8_t i = 0;
-+
-+#ifdef DWC_UTE_PER_IO
-+ ep->xiso_frame_num = 0xFFFFFFFF;
-+ ep->xiso_active_xfers = 0;
-+ ep->xiso_queued_xfers = 0;
-+#endif
-+
-+ /* Read DEPCTLn register */
-+ if (ep->is_in == 1) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ daintmsk.ep.in = 1 << ep->num;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ daintmsk.ep.out = 1 << ep->num;
-+ }
-+
-+ depctl.d32 = DWC_READ_REG32(addr);
-+
-+ depctl.b.usbactep = 0;
-+
-+ /* Update nextep_seq array and EPMSCNT in DCFG*/
-+ if (!(depctl.b.eptype & 1) && ep->is_in == 1) { // NP EP IN
-+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
-+ if (core_if->nextep_seq[i] == ep->num)
-+ break;
-+ }
-+ core_if->nextep_seq[i] = core_if->nextep_seq[ep->num];
-+ if (core_if->first_in_nextep_seq == ep->num)
-+ core_if->first_in_nextep_seq = i;
-+ core_if->nextep_seq[ep->num] = 0xff;
-+ depctl.b.nextep = 0;
-+ dcfg.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.b.epmscnt--;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
-+ dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
-+ __func__, core_if->first_in_nextep_seq);
-+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
-+ }
-+ }
-+
-+ if (ep->is_in == 1)
-+ depctl.b.txfnum = 0;
-+
-+ if (core_if->dma_desc_enable)
-+ depctl.b.epdis = 1;
-+
-+ DWC_WRITE_REG32(addr, depctl.d32);
-+ depctl.d32 = DWC_READ_REG32(addr);
-+ if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC
-+ && depctl.b.epena) {
-+ depctl_data_t depctl = {.d32 = 0};
-+ if (ep->is_in) {
-+ diepint_data_t diepint = {.d32 = 0};
-+
-+ depctl.b.snak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ diepctl, depctl.d32);
-+ do {
-+ dwc_udelay(10);
-+ diepint.d32 =
-+ DWC_READ_REG32(&core_if->
-+ dev_if->in_ep_regs[ep->num]->
-+ diepint);
-+ } while (!diepint.b.inepnakeff);
-+ diepint.b.inepnakeff = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ diepint, diepint.d32);
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ diepctl, depctl.d32);
-+ do {
-+ dwc_udelay(10);
-+ diepint.d32 =
-+ DWC_READ_REG32(&core_if->
-+ dev_if->in_ep_regs[ep->num]->
-+ diepint);
-+ } while (!diepint.b.epdisabled);
-+ diepint.b.epdisabled = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ diepint, diepint.d32);
-+ } else {
-+ dctl_data_t dctl = {.d32 = 0};
-+ gintmsk_data_t gintsts = {.d32 = 0};
-+ doepint_data_t doepint = {.d32 = 0};
-+ dctl.b.sgoutnak = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ dctl, 0, dctl.d32);
-+ do {
-+ dwc_udelay(10);
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ } while (!gintsts.b.goutnakeff);
-+ gintsts.d32 = 0;
-+ gintsts.b.goutnakeff = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ depctl.d32 = 0;
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32);
-+ do
-+ {
-+ dwc_udelay(10);
-+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[ep->num]->doepint);
-+ } while (!doepint.b.epdisabled);
-+
-+ doepint.b.epdisabled = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32);
-+
-+ dctl.d32 = 0;
-+ dctl.b.cgoutnak = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ }
-+ }
-+
-+ /* Disable the Interrupt for this EP */
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
-+ daintmsk.d32, 0);
-+
-+ if (ep->is_in == 1) {
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
-+ diepeachintmsk[ep->num], 0);
-+ } else {
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
-+ doepeachintmsk[ep->num], 0);
-+ }
-+ } else {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk,
-+ daintmsk.d32, 0);
-+ }
-+
-+}
-+
-+/**
-+ * This function initializes dma descriptor chain.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ uint32_t offset;
-+ uint32_t xfer_est;
-+ int i;
-+ unsigned maxxfer_local, total_len;
-+
-+ if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR &&
-+ (ep->maxpacket%4)) {
-+ maxxfer_local = ep->maxpacket;
-+ total_len = ep->xfer_len;
-+ } else {
-+ maxxfer_local = ep->maxxfer;
-+ total_len = ep->total_len;
-+ }
-+
-+ ep->desc_cnt = (total_len / maxxfer_local) +
-+ ((total_len % maxxfer_local) ? 1 : 0);
-+
-+ if (!ep->desc_cnt)
-+ ep->desc_cnt = 1;
-+
-+ if (ep->desc_cnt > MAX_DMA_DESC_CNT)
-+ ep->desc_cnt = MAX_DMA_DESC_CNT;
-+
-+ dma_desc = ep->desc_addr;
-+ if (maxxfer_local == ep->maxpacket) {
-+ if ((total_len % maxxfer_local) &&
-+ (total_len/maxxfer_local < MAX_DMA_DESC_CNT)) {
-+ xfer_est = (ep->desc_cnt - 1) * maxxfer_local +
-+ (total_len % maxxfer_local);
-+ } else
-+ xfer_est = ep->desc_cnt * maxxfer_local;
-+ } else
-+ xfer_est = total_len;
-+ offset = 0;
-+ for (i = 0; i < ep->desc_cnt; ++i) {
-+ /** DMA Descriptor Setup */
-+ if (xfer_est > maxxfer_local) {
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 0;
-+ dma_desc->status.b.ioc = 0;
-+ dma_desc->status.b.sp = 0;
-+ dma_desc->status.b.bytes = maxxfer_local;
-+ dma_desc->buf = ep->dma_addr + offset;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ xfer_est -= maxxfer_local;
-+ offset += maxxfer_local;
-+ } else {
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ if (ep->is_in) {
-+ dma_desc->status.b.sp =
-+ (xfer_est %
-+ ep->maxpacket) ? 1 : ((ep->
-+ sent_zlp) ? 1 : 0);
-+ dma_desc->status.b.bytes = xfer_est;
-+ } else {
-+ if (maxxfer_local == ep->maxpacket)
-+ dma_desc->status.b.bytes = xfer_est;
-+ else
-+ dma_desc->status.b.bytes =
-+ xfer_est + ((4 - (xfer_est & 0x3)) & 0x3);
-+ }
-+
-+ dma_desc->buf = ep->dma_addr + offset;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+ }
-+ dma_desc++;
-+ }
-+}
-+/**
-+ * This function is called when to write ISOC data into appropriate dedicated
-+ * periodic FIFO.
-+ */
-+static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0 };
-+ uint32_t len = 0;
-+ int epnum = dwc_ep->num;
-+ int dwords;
-+
-+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = dwc_ep->xfer_len - dwc_ep->xfer_count;
-+
-+ if (len > dwc_ep->maxpacket) {
-+ len = dwc_ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, dwc_ep, 0);
-+
-+ len = dwc_ep->xfer_len - dwc_ep->xfer_count;
-+ if (len > dwc_ep->maxpacket) {
-+ len = dwc_ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+ txstatus.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
-+ txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
-+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
-+
-+ return 1;
-+}
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR. the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n",
-+ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
-+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,
-+ ep->total_len);
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[ep->num];
-+
-+ gnptxsts_data_t gtxstatus;
-+
-+ gtxstatus.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
-+
-+ if (core_if->en_multiple_tx_fifo == 0
-+ && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) {
-+#ifdef DEBUG
-+ DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32);
-+#endif
-+ return;
-+ }
-+
-+ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
-+ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
-+
-+ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
-+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-+ ep->maxxfer : (ep->total_len - ep->xfer_len);
-+ else
-+ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ?
-+ MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
-+
-+
-+ /* Zero Length Packet? */
-+ if ((ep->xfer_len - ep->xfer_count) == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - ep->xfer_count - 1 +
-+ ep->maxpacket) / ep->maxpacket;
-+ if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
-+ deptsiz.b.pktcnt = MAX_PKT_CNT;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+ }
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC)
-+ deptsiz.b.mc = deptsiz.b.pktcnt;
-+ }
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ if (ep->type != DWC_OTG_EP_TYPE_ISOC)
-+ deptsiz.b.mc = 1;
-+ DWC_WRITE_REG32(&in_regs->dieptsiz,
-+ deptsiz.d32);
-+ DWC_WRITE_REG32(&(in_regs->diepdma),
-+ (uint32_t) ep->dma_addr);
-+ } else {
-+#ifdef DWC_UTE_CFI
-+ /* The descriptor chain should be already initialized by now */
-+ if (ep->buff_mode != BM_STANDARD) {
-+ DWC_WRITE_REG32(&in_regs->diepdma,
-+ ep->descs_dma_addr);
-+ } else {
-+#endif
-+ init_dma_desc_chain(core_if, ep);
-+ /** DIEPDMAn Register write */
-+ DWC_WRITE_REG32(&in_regs->diepdma,
-+ ep->dma_desc_addr);
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ }
-+ } else {
-+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
-+ if (ep->type != DWC_OTG_EP_TYPE_ISOC) {
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32
-+ (&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << ep->num;
-+ DWC_MODIFY_REG32
-+ (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+
-+ }
-+ }
-+ } else {
-+ write_isoc_tx_fifo(core_if, ep);
-+ }
-+ }
-+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
-+ depctl.b.nextep = core_if->nextep_seq[ep->num];
-+
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ dsts_data_t dsts = {.d32 = 0};
-+ if (ep->bInterval == 1) {
-+ dsts.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->dsts);
-+ ep->frame_num = dsts.b.soffn + ep->bInterval;
-+ if (ep->frame_num > 0x3FFF) {
-+ ep->frm_overrun = 1;
-+ ep->frame_num &= 0x3FFF;
-+ } else
-+ ep->frm_overrun = 0;
-+ if (ep->frame_num & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ }
-+ }
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
-+
-+ } else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[ep->num];
-+
-+ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
-+ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
-+
-+ if (!core_if->dma_desc_enable) {
-+ if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
-+ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
-+ ep->maxxfer : (ep->total_len - ep->xfer_len);
-+ else
-+ ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len
-+ - ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
-+ }
-+
-+ /* Program the transfer size and packet count as follows:
-+ *
-+ * pktcnt = N
-+ * xfersize = N * maxpacket
-+ */
-+ if ((ep->xfer_len - ep->xfer_count) == 0) {
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - ep->xfer_count +
-+ (ep->maxpacket - 1)) / ep->maxpacket;
-+ if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
-+ deptsiz.b.pktcnt = MAX_PKT_CNT;
-+ }
-+ if (!core_if->dma_desc_enable) {
-+ ep->xfer_len =
-+ deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
-+ }
-+ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
-+ ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz,
-+ deptsiz.d32);
-+
-+ DWC_WRITE_REG32(&(out_regs->doepdma),
-+ (uint32_t) ep->dma_addr);
-+ } else {
-+#ifdef DWC_UTE_CFI
-+ /* The descriptor chain should be already initialized by now */
-+ if (ep->buff_mode != BM_STANDARD) {
-+ DWC_WRITE_REG32(&out_regs->doepdma,
-+ ep->descs_dma_addr);
-+ } else {
-+#endif
-+ /** This is used for interrupt out transfers*/
-+ if (!ep->xfer_len)
-+ ep->xfer_len = ep->total_len;
-+ init_dma_desc_chain(core_if, ep);
-+
-+ if (core_if->core_params->dev_out_nak) {
-+ if (ep->type == DWC_OTG_EP_TYPE_BULK) {
-+ deptsiz.b.pktcnt = (ep->total_len +
-+ (ep->maxpacket - 1)) / ep->maxpacket;
-+ deptsiz.b.xfersize = ep->total_len;
-+ /* Remember initial value of doeptsiz */
-+ core_if->start_doeptsiz_val[ep->num] = deptsiz.d32;
-+ DWC_WRITE_REG32(&out_regs->doeptsiz,
-+ deptsiz.d32);
-+ }
-+ }
-+ /** DOEPDMAn Register write */
-+ DWC_WRITE_REG32(&out_regs->doepdma,
-+ ep->dma_desc_addr);
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ }
-+ } else {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ dsts_data_t dsts = {.d32 = 0};
-+ if (ep->bInterval == 1) {
-+ dsts.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->dsts);
-+ ep->frame_num = dsts.b.soffn + ep->bInterval;
-+ if (ep->frame_num > 0x3FFF) {
-+ ep->frm_overrun = 1;
-+ ep->frame_num &= 0x3FFF;
-+ } else
-+ ep->frm_overrun = 0;
-+
-+ if (ep->frame_num & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ }
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
-+ DWC_READ_REG32(&out_regs->doepctl),
-+ DWC_READ_REG32(&out_regs->doeptsiz));
-+ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
-+ daintmsk),
-+ DWC_READ_REG32(&core_if->core_global_regs->
-+ gintmsk));
-+
-+ /* Timer is scheduling only for out bulk transfers for
-+ * "Device DDMA OUT NAK Enhancement" feature to inform user
-+ * about received data payload in case of timeout
-+ */
-+ if (core_if->core_params->dev_out_nak) {
-+ if (ep->type == DWC_OTG_EP_TYPE_BULK) {
-+ core_if->ep_xfer_info[ep->num].core_if = core_if;
-+ core_if->ep_xfer_info[ep->num].ep = ep;
-+ core_if->ep_xfer_info[ep->num].state = 1;
-+
-+ /* Start a timer for this transfer. */
-+ DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000);
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * This function setup a zero length transfer in Buffer DMA and
-+ * Slave modes for usb requests with zero field set
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+
-+ depctl_data_t depctl;
-+ deptsiz_data_t deptsiz;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
-+ DWC_PRINTF("zero length transfer is called\n");
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[ep->num];
-+
-+ depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
-+ deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
-+
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ deptsiz.b.mc = 1;
-+ DWC_WRITE_REG32(&in_regs->dieptsiz,
-+ deptsiz.d32);
-+ DWC_WRITE_REG32(&(in_regs->diepdma),
-+ (uint32_t) ep->dma_addr);
-+ }
-+ } else {
-+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt,
-+ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
-+ * the data will be written into the fifo by the ISR.
-+ */
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk = 1 << ep->num;
-+ DWC_MODIFY_REG32(&core_if->
-+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+
-+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
-+ depctl.b.nextep = core_if->nextep_seq[ep->num];
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
-+
-+ } else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[ep->num];
-+
-+ depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
-+ deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
-+
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz,
-+ deptsiz.d32);
-+
-+ DWC_WRITE_REG32(&(out_regs->doepdma),
-+ (uint32_t) ep->dma_addr);
-+ }
-+ } else {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+
-+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
-+
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for EP0 and starts
-+ * the transfer. For an IN transfer, the packets will be loaded into
-+ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
-+ * unloaded from the Rx FIFO in the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+
-+ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
-+ "xfer_buff=%p start_xfer_buff=%p \n",
-+ ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
-+ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
-+
-+ ep->total_len = ep->xfer_len;
-+
-+ /* IN endpoint */
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[0];
-+
-+ gnptxsts_data_t gtxstatus;
-+
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
-+ if (depctl.b.epena)
-+ return;
-+ }
-+
-+ gtxstatus.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
-+
-+ /* If dedicated FIFO every time flush fifo before enable ep*/
-+ if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a)
-+ dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num);
-+
-+ if (core_if->en_multiple_tx_fifo == 0
-+ && gtxstatus.b.nptxqspcavail == 0
-+ && !core_if->dma_enable) {
-+#ifdef DEBUG
-+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
-+ DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n",
-+ DWC_READ_REG32(&in_regs->diepctl));
-+ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
-+ deptsiz.d32,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n",
-+ gtxstatus.d32);
-+#endif
-+ return;
-+ }
-+
-+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
-+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
-+
-+ /* Zero Length Packet? */
-+ if (ep->xfer_len == 0) {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 1;
-+ } else {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ if (ep->xfer_len > ep->maxpacket) {
-+ ep->xfer_len = ep->maxpacket;
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ } else {
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ }
-+ deptsiz.b.pktcnt = 1;
-+
-+ }
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
-+ deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ DWC_WRITE_REG32(&in_regs->dieptsiz,
-+ deptsiz.d32);
-+
-+ DWC_WRITE_REG32(&(in_regs->diepdma),
-+ (uint32_t) ep->dma_addr);
-+ } else {
-+ dma_desc = core_if->dev_if->in_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.sp =
-+ (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-+ dma_desc->status.b.bytes = ep->xfer_len;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DIEPDMA0 Register write */
-+ DWC_WRITE_REG32(&in_regs->diepdma,
-+ core_if->
-+ dev_if->dma_in_desc_addr);
-+ }
-+ } else {
-+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
-+ }
-+
-+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
-+ depctl.b.nextep = core_if->nextep_seq[ep->num];
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!core_if->dma_enable) {
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << ep->num;
-+ DWC_MODIFY_REG32(&core_if->
-+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ } else {
-+ /* OUT endpoint */
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[0];
-+
-+ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
-+ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count as follows:
-+ * xfersize = N * (maxpacket + 4 - (maxpacket % 4))
-+ * pktcnt = N */
-+ /* Zero Length Packet */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a)
-+ deptsiz.b.supcnt = 3;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n",
-+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz,
-+ deptsiz.d32);
-+
-+ DWC_WRITE_REG32(&(out_regs->doepdma),
-+ (uint32_t) ep->dma_addr);
-+ } else {
-+ dma_desc = core_if->dev_if->out_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ dma_desc->status.b.mtrf = 0;
-+ dma_desc->status.b.sr = 0;
-+ }
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = ep->maxpacket;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ DWC_WRITE_REG32(&out_regs->doepdma,
-+ core_if->dev_if->
-+ dma_out_desc_addr);
-+ }
-+ } else {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
-+ }
-+
-+ /* EP enable */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function continues control IN transfers started by
-+ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
-+ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
-+ * bit for the packet count.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP0 data.
-+ */
-+void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl;
-+ deptsiz0_data_t deptsiz;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+
-+ if (ep->is_in == 1) {
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[0];
-+ gnptxsts_data_t tx_status = {.d32 = 0 };
-+
-+ tx_status.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
-+ /** @todo Should there be check for room in the Tx
-+ * Status Queue. If not remove the code above this comment. */
-+
-+ depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
-+ deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+
-+ if (core_if->dma_desc_enable == 0) {
-+ deptsiz.b.xfersize =
-+ (ep->total_len - ep->xfer_count) >
-+ ep->maxpacket ? ep->maxpacket : (ep->total_len -
-+ ep->xfer_count);
-+ deptsiz.b.pktcnt = 1;
-+ if (core_if->dma_enable == 0) {
-+ ep->xfer_len += deptsiz.b.xfersize;
-+ } else {
-+ ep->xfer_len = deptsiz.b.xfersize;
-+ }
-+ DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
-+ } else {
-+ ep->xfer_len =
-+ (ep->total_len - ep->xfer_count) >
-+ ep->maxpacket ? ep->maxpacket : (ep->total_len -
-+ ep->xfer_count);
-+
-+ dma_desc = core_if->dev_if->in_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.sp =
-+ (ep->xfer_len == ep->maxpacket) ? 0 : 1;
-+ dma_desc->status.b.bytes = ep->xfer_len;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DIEPDMA0 Register write */
-+ DWC_WRITE_REG32(&in_regs->diepdma,
-+ core_if->dev_if->dma_in_desc_addr);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
-+ deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ if (core_if->dma_desc_enable == 0)
-+ DWC_WRITE_REG32(&(in_regs->diepdma),
-+ (uint32_t) ep->dma_addr);
-+ }
-+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
-+ depctl.b.nextep = core_if->nextep_seq[ep->num];
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
-+
-+ /**
-+ * Enable the Non-Periodic Tx FIFO empty interrupt, the
-+ * data will be written into the fifo by the ISR.
-+ */
-+ if (!core_if->dma_enable) {
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ /* First clear it from GINTSTS */
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->gintmsk,
-+ intr_mask.d32, intr_mask.d32);
-+
-+ } else {
-+ /* Enable the Tx FIFO Empty Interrupt for this EP */
-+ if (ep->xfer_len > 0) {
-+ uint32_t fifoemptymsk = 0;
-+ fifoemptymsk |= 1 << ep->num;
-+ DWC_MODIFY_REG32(&core_if->
-+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ 0, fifoemptymsk);
-+ }
-+ }
-+ }
-+ } else {
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[0];
-+
-+ depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
-+ deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
-+
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->maxpacket;
-+ deptsiz.b.pktcnt = 1;
-+
-+ if (core_if->dma_desc_enable == 0) {
-+ DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
-+ } else {
-+ dma_desc = core_if->dev_if->out_desc_addr;
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = ep->maxpacket;
-+ dma_desc->buf = ep->dma_addr;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ DWC_WRITE_REG32(&out_regs->doepdma,
-+ core_if->dev_if->dma_out_desc_addr);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "IN len=%d xfersize=%d pktcnt=%d [%08x]\n",
-+ ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
-+ deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
-+ if (core_if->dma_desc_enable == 0)
-+ DWC_WRITE_REG32(&(out_regs->doepdma),
-+ (uint32_t) ep->dma_addr);
-+
-+ }
-+
-+ /* EP enable, IN data in FIFO */
-+ depctl.b.cnak = 1;
-+ depctl.b.epena = 1;
-+ DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
-+
-+ }
-+}
-+
-+#ifdef DEBUG
-+void dump_msg(const u8 * buf, unsigned int length)
-+{
-+ unsigned int start, num, i;
-+ char line[52], *p;
-+
-+ if (length >= 512)
-+ return;
-+ start = 0;
-+ while (length > 0) {
-+ num = length < 16u ? length : 16u;
-+ p = line;
-+ for (i = 0; i < num; ++i) {
-+ if (i == 8)
-+ *p++ = ' ';
-+ DWC_SPRINTF(p, " %02x", buf[i]);
-+ p += 3;
-+ }
-+ *p = 0;
-+ DWC_PRINTF("%6x: %s\n", start, line);
-+ buf += num;
-+ start += num;
-+ length -= num;
-+ }
-+}
-+#else
-+static inline void dump_msg(const u8 * buf, unsigned int length)
-+{
-+}
-+#endif
-+
-+/**
-+ * This function writes a packet into the Tx FIFO associated with the
-+ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For
-+ * periodic EPs the periodic Tx FIFO associated with the EP is written
-+ * with all packets for the next micro-frame.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to write packet for.
-+ * @param dma Indicates if DMA is being used.
-+ */
-+void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep,
-+ int dma)
-+{
-+ /**
-+ * The buffer is padded to DWORD on a per packet basis in
-+ * slave/dma mode if the MPS is not DWORD aligned. The last
-+ * packet, if short, is also padded to a multiple of DWORD.
-+ *
-+ * ep->xfer_buff always starts DWORD aligned in memory and is a
-+ * multiple of DWORD in length
-+ *
-+ * ep->xfer_len can be any number of bytes
-+ *
-+ * ep->xfer_count is a multiple of ep->maxpacket until the last
-+ * packet
-+ *
-+ * FIFO access is DWORD */
-+
-+ uint32_t i;
-+ uint32_t byte_count;
-+ uint32_t dword_count;
-+ uint32_t *fifo;
-+ uint32_t *data_buff = (uint32_t *) ep->xfer_buff;
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if,
-+ ep);
-+ if (ep->xfer_count >= ep->xfer_len) {
-+ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
-+ return;
-+ }
-+
-+ /* Find the byte length of the packet either short packet or MPS */
-+ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
-+ byte_count = ep->xfer_len - ep->xfer_count;
-+ } else {
-+ byte_count = ep->maxpacket;
-+ }
-+
-+ /* Find the DWORD length, padded by extra bytes as neccessary if MPS
-+ * is not a multiple of DWORD */
-+ dword_count = (byte_count + 3) / 4;
-+
-+#ifdef VERBOSE
-+ dump_msg(ep->xfer_buff, byte_count);
-+#endif
-+
-+ /**@todo NGS Where are the Periodic Tx FIFO addresses
-+ * intialized? What should this be? */
-+
-+ fifo = core_if->data_fifo[ep->num];
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
-+ fifo, data_buff, *data_buff, byte_count);
-+
-+ if (!dma) {
-+ for (i = 0; i < dword_count; i++, data_buff++) {
-+ DWC_WRITE_REG32(fifo, *data_buff);
-+ }
-+ }
-+
-+ ep->xfer_count += byte_count;
-+ ep->xfer_buff += byte_count;
-+ ep->dma_addr += byte_count;
-+}
-+
-+/**
-+ * Set the EP STALL.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to set the stall on.
-+ */
-+void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in ? "IN" : "OUT"));
-+
-+ if (ep->is_in == 1) {
-+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-+ depctl.d32 = DWC_READ_REG32(depctl_addr);
-+
-+ /* set the disable and stall bits */
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+ depctl.b.stall = 1;
-+ DWC_WRITE_REG32(depctl_addr, depctl.d32);
-+ } else {
-+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-+ depctl.d32 = DWC_READ_REG32(depctl_addr);
-+
-+ /* set the stall bit */
-+ depctl.b.stall = 1;
-+ DWC_WRITE_REG32(depctl_addr, depctl.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
-+
-+ return;
-+}
-+
-+/**
-+ * Clear the EP STALL.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to clear stall from.
-+ */
-+void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl;
-+ volatile uint32_t *depctl_addr;
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
-+ (ep->is_in ? "IN" : "OUT"));
-+
-+ if (ep->is_in == 1) {
-+ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
-+ } else {
-+ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
-+ }
-+
-+ depctl.d32 = DWC_READ_REG32(depctl_addr);
-+
-+ /* clear the stall bits */
-+ depctl.b.stall = 0;
-+
-+ /*
-+ * USB Spec 9.4.5: For endpoints using data toggle, regardless
-+ * of whether an endpoint has the Halt feature set, a
-+ * ClearFeature(ENDPOINT_HALT) request always results in the
-+ * data toggle being reinitialized to DATA0.
-+ */
-+ if (ep->type == DWC_OTG_EP_TYPE_INTR ||
-+ ep->type == DWC_OTG_EP_TYPE_BULK) {
-+ depctl.b.setd0pid = 1; /* DATA0 */
-+ }
-+
-+ DWC_WRITE_REG32(depctl_addr, depctl.d32);
-+ DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
-+ return;
-+}
-+
-+/**
-+ * This function reads a packet from the Rx FIFO into the destination
-+ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dest Destination buffer for the packet.
-+ * @param bytes Number of bytes to copy to the destination.
-+ */
-+void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
-+ uint8_t * dest, uint16_t bytes)
-+{
-+ int i;
-+ int word_count = (bytes + 3) / 4;
-+
-+ volatile uint32_t *fifo = core_if->data_fifo[0];
-+ uint32_t *data_buff = (uint32_t *) dest;
-+
-+ /**
-+ * @todo Account for the case where _dest is not dword aligned. This
-+ * requires reading data from the FIFO into a uint32_t temp buffer,
-+ * then moving it into the data buffer.
-+ */
-+
-+ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
-+ core_if, dest, bytes);
-+
-+ for (i = 0; i < word_count; i++, data_buff++) {
-+ *data_buff = DWC_READ_REG32(fifo);
-+ }
-+
-+ return;
-+}
-+
-+/**
-+ * This functions reads the device registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINTF("Device Global Registers\n");
-+ addr = &core_if->dev_if->dev_global_regs->dcfg;
-+ DWC_PRINTF("DCFG @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->dctl;
-+ DWC_PRINTF("DCTL @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->dsts;
-+ DWC_PRINTF("DSTS @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->diepmsk;
-+ DWC_PRINTF("DIEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->doepmsk;
-+ DWC_PRINTF("DOEPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->daint;
-+ DWC_PRINTF("DAINT @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->daintmsk;
-+ DWC_PRINTF("DAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->dtknqr1;
-+ DWC_PRINTF("DTKNQR1 @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
-+ addr = &core_if->dev_if->dev_global_regs->dtknqr2;
-+ DWC_PRINTF("DTKNQR2 @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ }
-+
-+ addr = &core_if->dev_if->dev_global_regs->dvbusdis;
-+ DWC_PRINTF("DVBUSID @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+
-+ addr = &core_if->dev_if->dev_global_regs->dvbuspulse;
-+ DWC_PRINTF("DVBUSPULSE @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+
-+ addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
-+ DWC_PRINTF("DTKNQR3_DTHRCTL @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+
-+ if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
-+ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINTF("DTKNQR4 @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ }
-+
-+ addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
-+ DWC_PRINTF("FIFOEMPMSK @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+
-+ if (core_if->hwcfg2.b.multi_proc_int) {
-+
-+ addr = &core_if->dev_if->dev_global_regs->deachint;
-+ DWC_PRINTF("DEACHINT @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->dev_global_regs->deachintmsk;
-+ DWC_PRINTF("DEACHINTMSK @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+
-+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
-+ addr =
-+ &core_if->dev_if->
-+ dev_global_regs->diepeachintmsk[i];
-+ DWC_PRINTF("DIEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n",
-+ i, (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ }
-+
-+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
-+ addr =
-+ &core_if->dev_if->
-+ dev_global_regs->doepeachintmsk[i];
-+ DWC_PRINTF("DOEPEACHINTMSK[%d] @0x%08lX : 0x%08X\n",
-+ i, (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ }
-+ }
-+
-+ for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_PRINTF("Device IN EP %d Registers\n", i);
-+ addr = &core_if->dev_if->in_ep_regs[i]->diepctl;
-+ DWC_PRINTF("DIEPCTL @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->in_ep_regs[i]->diepint;
-+ DWC_PRINTF("DIEPINT @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz;
-+ DWC_PRINTF("DIETSIZ @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->in_ep_regs[i]->diepdma;
-+ DWC_PRINTF("DIEPDMA @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts;
-+ DWC_PRINTF("DTXFSTS @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->in_ep_regs[i]->diepdmab;
-+ DWC_PRINTF("DIEPDMAB @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ );
-+ }
-+
-+ for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
-+ DWC_PRINTF("Device OUT EP %d Registers\n", i);
-+ addr = &core_if->dev_if->out_ep_regs[i]->doepctl;
-+ DWC_PRINTF("DOEPCTL @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->out_ep_regs[i]->doepint;
-+ DWC_PRINTF("DOEPINT @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz;
-+ DWC_PRINTF("DOETSIZ @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->dev_if->out_ep_regs[i]->doepdma;
-+ DWC_PRINTF("DOEPDMA @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ if (core_if->dma_enable) { /* Don't access this register in SLAVE mode */
-+ addr = &core_if->dev_if->out_ep_regs[i]->doepdmab;
-+ DWC_PRINTF("DOEPDMAB @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ }
-+
-+ }
-+}
-+
-+/**
-+ * This functions reads the SPRAM and prints its content
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if)
-+{
-+ volatile uint8_t *addr, *start_addr, *end_addr;
-+
-+ DWC_PRINTF("SPRAM Data:\n");
-+ start_addr = (void *)core_if->core_global_regs;
-+ DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr);
-+ start_addr += 0x00028000;
-+ end_addr = (void *)core_if->core_global_regs;
-+ end_addr += 0x000280e0;
-+
-+ for (addr = start_addr; addr < end_addr; addr += 16) {
-+ DWC_PRINTF
-+ ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n",
-+ (unsigned long)addr, addr[0], addr[1], addr[2], addr[3],
-+ addr[4], addr[5], addr[6], addr[7], addr[8], addr[9],
-+ addr[10], addr[11], addr[12], addr[13], addr[14], addr[15]
-+ );
-+ }
-+
-+ return;
-+}
-+
-+/**
-+ * This function reads the host registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if)
-+{
-+ int i;
-+ volatile uint32_t *addr;
-+
-+ DWC_PRINTF("Host Global Registers\n");
-+ addr = &core_if->host_if->host_global_regs->hcfg;
-+ DWC_PRINTF("HCFG @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->host_global_regs->hfir;
-+ DWC_PRINTF("HFIR @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->host_global_regs->hfnum;
-+ DWC_PRINTF("HFNUM @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->host_global_regs->hptxsts;
-+ DWC_PRINTF("HPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->host_global_regs->haint;
-+ DWC_PRINTF("HAINT @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->host_global_regs->haintmsk;
-+ DWC_PRINTF("HAINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ if (core_if->dma_desc_enable) {
-+ addr = &core_if->host_if->host_global_regs->hflbaddr;
-+ DWC_PRINTF("HFLBADDR @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ }
-+
-+ addr = core_if->host_if->hprt0;
-+ DWC_PRINTF("HPRT0 @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+
-+ for (i = 0; i < core_if->core_params->host_channels; i++) {
-+ DWC_PRINTF("Host Channel %d Specific Registers\n", i);
-+ addr = &core_if->host_if->hc_regs[i]->hcchar;
-+ DWC_PRINTF("HCCHAR @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->hc_regs[i]->hcsplt;
-+ DWC_PRINTF("HCSPLT @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->hc_regs[i]->hcint;
-+ DWC_PRINTF("HCINT @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->hc_regs[i]->hcintmsk;
-+ DWC_PRINTF("HCINTMSK @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->hc_regs[i]->hctsiz;
-+ DWC_PRINTF("HCTSIZ @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->host_if->hc_regs[i]->hcdma;
-+ DWC_PRINTF("HCDMA @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ if (core_if->dma_desc_enable) {
-+ addr = &core_if->host_if->hc_regs[i]->hcdmab;
-+ DWC_PRINTF("HCDMAB @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ }
-+
-+ }
-+ return;
-+}
-+
-+/**
-+ * This function reads the core global registers and prints them
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if)
-+{
-+ int i, ep_num;
-+ volatile uint32_t *addr;
-+ char *txfsiz;
-+
-+ DWC_PRINTF("Core Global Registers\n");
-+ addr = &core_if->core_global_regs->gotgctl;
-+ DWC_PRINTF("GOTGCTL @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gotgint;
-+ DWC_PRINTF("GOTGINT @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gahbcfg;
-+ DWC_PRINTF("GAHBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gusbcfg;
-+ DWC_PRINTF("GUSBCFG @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->grstctl;
-+ DWC_PRINTF("GRSTCTL @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gintsts;
-+ DWC_PRINTF("GINTSTS @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gintmsk;
-+ DWC_PRINTF("GINTMSK @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->grxstsr;
-+ DWC_PRINTF("GRXSTSR @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->grxfsiz;
-+ DWC_PRINTF("GRXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gnptxfsiz;
-+ DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gnptxsts;
-+ DWC_PRINTF("GNPTXSTS @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gi2cctl;
-+ DWC_PRINTF("GI2CCTL @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gpvndctl;
-+ DWC_PRINTF("GPVNDCTL @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->ggpio;
-+ DWC_PRINTF("GGPIO @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->guid;
-+ DWC_PRINTF("GUID @0x%08lX : 0x%08X\n",
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gsnpsid;
-+ DWC_PRINTF("GSNPSID @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->ghwcfg1;
-+ DWC_PRINTF("GHWCFG1 @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->ghwcfg2;
-+ DWC_PRINTF("GHWCFG2 @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->ghwcfg3;
-+ DWC_PRINTF("GHWCFG3 @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->ghwcfg4;
-+ DWC_PRINTF("GHWCFG4 @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->glpmcfg;
-+ DWC_PRINTF("GLPMCFG @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gpwrdn;
-+ DWC_PRINTF("GPWRDN @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->gdfifocfg;
-+ DWC_PRINTF("GDFIFOCFG @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+ addr = &core_if->core_global_regs->adpctl;
-+ DWC_PRINTF("ADPCTL @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ dwc_otg_adp_read_reg(core_if));
-+ addr = &core_if->core_global_regs->hptxfsiz;
-+ DWC_PRINTF("HPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep;
-+ txfsiz = "DPTXFSIZ";
-+ } else {
-+ ep_num = core_if->hwcfg4.b.num_in_eps;
-+ txfsiz = "DIENPTXF";
-+ }
-+ for (i = 0; i < ep_num; i++) {
-+ addr = &core_if->core_global_regs->dtxfsiz[i];
-+ DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1,
-+ (unsigned long)addr, DWC_READ_REG32(addr));
-+ }
-+ addr = core_if->pcgcctl;
-+ DWC_PRINTF("PCGCCTL @0x%08lX : 0x%08X\n", (unsigned long)addr,
-+ DWC_READ_REG32(addr));
-+}
-+
-+/**
-+ * Flush a Tx FIFO.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param num Tx FIFO to flush.
-+ */
-+void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = {.d32 = 0 };
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num);
-+
-+ greset.b.txfflsh = 1;
-+ greset.b.txfnum = num;
-+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
-+
-+ do {
-+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
-+ __func__, greset.d32,
-+ DWC_READ_REG32(&global_regs->gnptxsts));
-+ break;
-+ }
-+ dwc_udelay(1);
-+ } while (greset.b.txfflsh == 1);
-+
-+ /* Wait for 3 PHY Clocks */
-+ dwc_udelay(1);
-+}
-+
-+/**
-+ * Flush Rx FIFO.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = {.d32 = 0 };
-+ int count = 0;
-+
-+ DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__);
-+ /*
-+ *
-+ */
-+ greset.b.rxfflsh = 1;
-+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
-+
-+ do {
-+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ break;
-+ }
-+ dwc_udelay(1);
-+ } while (greset.b.rxfflsh == 1);
-+
-+ /* Wait for 3 PHY Clocks */
-+ dwc_udelay(1);
-+}
-+
-+/**
-+ * Do core a soft reset of the core. Be careful with this because it
-+ * resets all the internal state machines of the core.
-+ */
-+void dwc_otg_core_reset(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ volatile grstctl_t greset = {.d32 = 0 };
-+ int count = 0;
-+
-+ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
-+ /* Wait for AHB master IDLE state. */
-+ do {
-+ dwc_udelay(10);
-+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
-+ if (++count > 100000) {
-+ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
-+ greset.d32);
-+ return;
-+ }
-+ }
-+ while (greset.b.ahbidle == 0);
-+
-+ /* Core Soft Reset */
-+ count = 0;
-+ greset.b.csftrst = 1;
-+ DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
-+ do {
-+ greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
-+ if (++count > 10000) {
-+ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n",
-+ __func__, greset.d32);
-+ break;
-+ }
-+ dwc_udelay(1);
-+ }
-+ while (greset.b.csftrst == 1);
-+
-+ /* Wait for 3 PHY Clocks */
-+ dwc_mdelay(100);
-+}
-+
-+uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if)
-+{
-+ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
-+}
-+
-+uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if)
-+{
-+ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
-+}
-+
-+/**
-+ * Register HCD callbacks. The callbacks are used to start and stop
-+ * the HCD for interrupt processing.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param cb the HCD callback structure.
-+ * @param p pointer to be passed to callback function (usb_hcd*).
-+ */
-+void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if,
-+ dwc_otg_cil_callbacks_t * cb, void *p)
-+{
-+ core_if->hcd_cb = cb;
-+ cb->p = p;
-+}
-+
-+/**
-+ * Register PCD callbacks. The callbacks are used to start and stop
-+ * the PCD for interrupt processing.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param cb the PCD callback structure.
-+ * @param p pointer to be passed to callback function (pcd*).
-+ */
-+void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if,
-+ dwc_otg_cil_callbacks_t * cb, void *p)
-+{
-+ core_if->pcd_cb = cb;
-+ cb->p = p;
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function writes isoc data per 1 (micro)frame into tx fifo
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0 };
-+ uint32_t len = 0;
-+ uint32_t dwords;
-+
-+ ep->xfer_len = ep->data_per_frame;
-+ ep->xfer_count = 0;
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[ep->num];
-+
-+ len = ep->xfer_len - ep->xfer_count;
-+
-+ if (len > ep->maxpacket) {
-+ len = ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, ep, 0);
-+
-+ len = ep->xfer_len - ep->xfer_count;
-+ if (len > ep->maxpacket) {
-+ len = ep->maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+ txstatus.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num,
-+ txstatus.d32);
-+ }
-+}
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * ep)
-+{
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dsts_data_t dsts = {.d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if (ep->is_in) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ ep->xfer_len = ep->data_per_frame;
-+ ep->xfer_count = 0;
-+ ep->xfer_buff = ep->cur_pkt_addr;
-+ ep->dma_addr = ep->cur_pkt_dma_addr;
-+
-+ if (ep->is_in) {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
-+ deptsiz.b.mc = deptsiz.b.pktcnt;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz,
-+ deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ if (core_if->dma_enable) {
-+ DWC_WRITE_REG32(&
-+ (core_if->dev_if->in_ep_regs[ep->num]->
-+ diepdma), (uint32_t) ep->dma_addr);
-+ }
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
-+
-+ if (core_if->dma_enable) {
-+ DWC_WRITE_REG32(&
-+ (core_if->dev_if->
-+ out_ep_regs[ep->num]->doepdma),
-+ (uint32_t) ep->dma_addr);
-+ }
-+ }
-+
-+ /** Enable endpoint, clear nak */
-+
-+ depctl.d32 = 0;
-+ if (ep->bInterval == 1) {
-+ dsts.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+ ep->next_frame = dsts.b.soffn + ep->bInterval;
-+
-+ if (ep->next_frame & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ } else {
-+ ep->next_frame += ep->bInterval;
-+
-+ if (ep->next_frame & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ }
-+ }
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ DWC_MODIFY_REG32(addr, 0, depctl.d32);
-+ depctl.d32 = DWC_READ_REG32(addr);
-+
-+ if (ep->is_in && core_if->dma_enable == 0) {
-+ write_isoc_frame_data(core_if, ep);
-+ }
-+
-+}
-+#endif /* DWC_EN_ISOC */
-+
-+static void dwc_otg_set_uninitialized(int32_t * p, int size)
-+{
-+ int i;
-+ for (i = 0; i < size; i++) {
-+ p[i] = -1;
-+ }
-+}
-+
-+static int dwc_otg_param_initialized(int32_t val)
-+{
-+ return val != -1;
-+}
-+
-+static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if)
-+{
-+ int i;
-+ core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params));
-+ if (!core_if->core_params) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ dwc_otg_set_uninitialized((int32_t *) core_if->core_params,
-+ sizeof(*core_if->core_params) /
-+ sizeof(int32_t));
-+ DWC_PRINTF("Setting default values for core params\n");
-+ dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default);
-+ dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default);
-+ dwc_otg_set_param_dma_desc_enable(core_if,
-+ dwc_param_dma_desc_enable_default);
-+ dwc_otg_set_param_opt(core_if, dwc_param_opt_default);
-+ dwc_otg_set_param_dma_burst_size(core_if,
-+ dwc_param_dma_burst_size_default);
-+ dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
-+ dwc_param_host_support_fs_ls_low_power_default);
-+ dwc_otg_set_param_enable_dynamic_fifo(core_if,
-+ dwc_param_enable_dynamic_fifo_default);
-+ dwc_otg_set_param_data_fifo_size(core_if,
-+ dwc_param_data_fifo_size_default);
-+ dwc_otg_set_param_dev_rx_fifo_size(core_if,
-+ dwc_param_dev_rx_fifo_size_default);
-+ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
-+ dwc_param_dev_nperio_tx_fifo_size_default);
-+ dwc_otg_set_param_host_rx_fifo_size(core_if,
-+ dwc_param_host_rx_fifo_size_default);
-+ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
-+ dwc_param_host_nperio_tx_fifo_size_default);
-+ dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
-+ dwc_param_host_perio_tx_fifo_size_default);
-+ dwc_otg_set_param_max_transfer_size(core_if,
-+ dwc_param_max_transfer_size_default);
-+ dwc_otg_set_param_max_packet_count(core_if,
-+ dwc_param_max_packet_count_default);
-+ dwc_otg_set_param_host_channels(core_if,
-+ dwc_param_host_channels_default);
-+ dwc_otg_set_param_dev_endpoints(core_if,
-+ dwc_param_dev_endpoints_default);
-+ dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default);
-+ dwc_otg_set_param_speed(core_if, dwc_param_speed_default);
-+ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
-+ dwc_param_host_ls_low_power_phy_clk_default);
-+ dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default);
-+ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
-+ dwc_param_phy_ulpi_ext_vbus_default);
-+ dwc_otg_set_param_phy_utmi_width(core_if,
-+ dwc_param_phy_utmi_width_default);
-+ dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default);
-+ dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default);
-+ dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default);
-+ dwc_otg_set_param_en_multiple_tx_fifo(core_if,
-+ dwc_param_en_multiple_tx_fifo_default);
-+ for (i = 0; i < 15; i++) {
-+ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
-+ dwc_param_dev_perio_tx_fifo_size_default,
-+ i);
-+ }
-+
-+ for (i = 0; i < 15; i++) {
-+ dwc_otg_set_param_dev_tx_fifo_size(core_if,
-+ dwc_param_dev_tx_fifo_size_default,
-+ i);
-+ }
-+ dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default);
-+ dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default);
-+ dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default);
-+ dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default);
-+ dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default);
-+ dwc_otg_set_param_tx_thr_length(core_if,
-+ dwc_param_tx_thr_length_default);
-+ dwc_otg_set_param_rx_thr_length(core_if,
-+ dwc_param_rx_thr_length_default);
-+ dwc_otg_set_param_ahb_thr_ratio(core_if,
-+ dwc_param_ahb_thr_ratio_default);
-+ dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default);
-+ dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default);
-+ dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default);
-+ dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default);
-+ dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default);
-+ dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default);
-+ dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default);
-+ DWC_PRINTF("Finished setting default values for core params\n");
-+
-+ return 0;
-+}
-+
-+uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->dma_enable;
-+}
-+
-+/* Checks if the parameter is outside of its valid range of values */
-+#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
-+ (((_param_) < (_low_)) || \
-+ ((_param_) > (_high_)))
-+
-+/* Parameter access functions */
-+int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int valid;
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
-+ DWC_WARN("Wrong value for otg_cap parameter\n");
-+ DWC_WARN("otg_cap parameter must be 0,1 or 2\n");
-+ retval = -DWC_E_INVALID;
-+ goto out;
-+ }
-+
-+ valid = 1;
-+ switch (val) {
-+ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
-+ if (core_if->hwcfg2.b.op_mode !=
-+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-+ valid = 0;
-+ break;
-+ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
-+ if ((core_if->hwcfg2.b.op_mode !=
-+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-+ && (core_if->hwcfg2.b.op_mode !=
-+ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
-+ && (core_if->hwcfg2.b.op_mode !=
-+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
-+ && (core_if->hwcfg2.b.op_mode !=
-+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
-+ valid = 0;
-+ }
-+ break;
-+ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
-+ /* always valid */
-+ break;
-+ }
-+ if (!valid) {
-+ if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) {
-+ DWC_ERROR
-+ ("%d invalid for otg_cap paremter. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ (((core_if->hwcfg2.b.op_mode ==
-+ DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
-+ || (core_if->hwcfg2.b.op_mode ==
-+ DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
-+ || (core_if->hwcfg2.b.op_mode ==
-+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
-+ || (core_if->hwcfg2.b.op_mode ==
-+ DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
-+ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
-+ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->otg_cap = val;
-+out:
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->otg_cap;
-+}
-+
-+int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for opt parameter\n");
-+ return -DWC_E_INVALID;
-+ }
-+ core_if->core_params->opt = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->opt;
-+}
-+
-+int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for dma enable\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) {
-+ if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for dma_enable paremter. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->dma_enable = val;
-+ if (val == 0) {
-+ dwc_otg_set_param_dma_desc_enable(core_if, 0);
-+ }
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dma_enable;
-+}
-+
-+int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for dma_enable\n");
-+ DWC_WARN("dma_desc_enable must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1)
-+ && ((dwc_otg_get_param_dma_enable(core_if) == 0)
-+ || (core_if->hwcfg4.b.desc_dma == 0))) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->dma_desc_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+ core_if->core_params->dma_desc_enable = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dma_desc_enable;
-+}
-+
-+int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for host_support_fs_low_power\n");
-+ DWC_WARN("host_support_fs_low_power must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+ core_if->core_params->host_support_fs_ls_low_power = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
-+ core_if)
-+{
-+ return core_if->core_params->host_support_fs_ls_low_power;
-+}
-+
-+int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for enable_dynamic_fifo\n");
-+ DWC_WARN("enable_dynamic_fifo must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->enable_dynamic_fifo)) {
-+ DWC_ERROR
-+ ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+ core_if->core_params->enable_dynamic_fifo = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->enable_dynamic_fifo;
-+}
-+
-+int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 32, 32768)) {
-+ DWC_WARN("Wrong value for data_fifo_size\n");
-+ DWC_WARN("data_fifo_size must be 32-32768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > core_if->hwcfg3.b.dfifo_depth) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->data_fifo_size)) {
-+ DWC_ERROR
-+ ("%d invalid for data_fifo_size parameter. Check HW configuration.\n",
-+ val);
-+ }
-+ val = core_if->hwcfg3.b.dfifo_depth;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->data_fifo_size = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->data_fifo_size;
-+}
-+
-+int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
-+ DWC_WARN("Wrong value for dev_rx_fifo_size\n");
-+ DWC_WARN("dev_rx_fifo_size must be 16-32768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
-+ if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) {
-+ DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val);
-+ }
-+ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->dev_rx_fifo_size = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dev_rx_fifo_size;
-+}
-+
-+int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
-+ DWC_WARN("Wrong value for dev_nperio_tx_fifo\n");
-+ DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->dev_nperio_tx_fifo_size)) {
-+ DWC_ERROR
-+ ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
-+ 16);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->dev_nperio_tx_fifo_size = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dev_nperio_tx_fifo_size;
-+}
-+
-+int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
-+ DWC_WARN("Wrong value for host_rx_fifo_size\n");
-+ DWC_WARN("host_rx_fifo_size must be 16-32768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->host_rx_fifo_size)) {
-+ DWC_ERROR
-+ ("%d invalid for host_rx_fifo_size. Check HW configuration.\n",
-+ val);
-+ }
-+ val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->host_rx_fifo_size = val;
-+ return retval;
-+
-+}
-+
-+int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->host_rx_fifo_size;
-+}
-+
-+int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
-+ DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n");
-+ DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->host_nperio_tx_fifo_size)) {
-+ DWC_ERROR
-+ ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
-+ 16);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->host_nperio_tx_fifo_size = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->host_nperio_tx_fifo_size;
-+}
-+
-+int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
-+ DWC_WARN("Wrong value for host_perio_tx_fifo_size\n");
-+ DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > ((core_if->hptxfsiz.d32) >> 16)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->host_perio_tx_fifo_size)) {
-+ DWC_ERROR
-+ ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n",
-+ val);
-+ }
-+ val = (core_if->hptxfsiz.d32) >> 16;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->host_perio_tx_fifo_size = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->host_perio_tx_fifo_size;
-+}
-+
-+int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) {
-+ DWC_WARN("Wrong value for max_transfer_size\n");
-+ DWC_WARN("max_transfer_size must be 2047-524288\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->max_transfer_size)) {
-+ DWC_ERROR
-+ ("%d invalid for max_transfer_size. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) -
-+ 1);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->max_transfer_size = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->max_transfer_size;
-+}
-+
-+int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 15, 511)) {
-+ DWC_WARN("Wrong value for max_packet_count\n");
-+ DWC_WARN("max_packet_count must be 15-511\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->max_packet_count)) {
-+ DWC_ERROR
-+ ("%d invalid for max_packet_count. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->max_packet_count = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->max_packet_count;
-+}
-+
-+int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 1, 16)) {
-+ DWC_WARN("Wrong value for host_channels\n");
-+ DWC_WARN("host_channels must be 1-16\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > (core_if->hwcfg2.b.num_host_chan + 1)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->host_channels)) {
-+ DWC_ERROR
-+ ("%d invalid for host_channels. Check HW configurations.\n",
-+ val);
-+ }
-+ val = (core_if->hwcfg2.b.num_host_chan + 1);
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->host_channels = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->host_channels;
-+}
-+
-+int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 1, 15)) {
-+ DWC_WARN("Wrong value for dev_endpoints\n");
-+ DWC_WARN("dev_endpoints must be 1-15\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val > (core_if->hwcfg2.b.num_dev_ep)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->dev_endpoints)) {
-+ DWC_ERROR
-+ ("%d invalid for dev_endpoints. Check HW configurations.\n",
-+ val);
-+ }
-+ val = core_if->hwcfg2.b.num_dev_ep;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->dev_endpoints = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dev_endpoints;
-+}
-+
-+int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
-+ DWC_WARN("Wrong value for phy_type\n");
-+ DWC_WARN("phy_type must be 0,1 or 2\n");
-+ return -DWC_E_INVALID;
-+ }
-+#ifndef NO_FS_PHY_HW_CHECKS
-+ if ((val == DWC_PHY_TYPE_PARAM_UTMI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 1) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3))) {
-+ valid = 1;
-+ } else if ((val == DWC_PHY_TYPE_PARAM_ULPI) &&
-+ ((core_if->hwcfg2.b.hs_phy_type == 2) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 3))) {
-+ valid = 1;
-+ } else if ((val == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1)) {
-+ valid = 1;
-+ }
-+ if (!valid) {
-+ if (dwc_otg_param_initialized(core_if->core_params->phy_type)) {
-+ DWC_ERROR
-+ ("%d invalid for phy_type. Check HW configurations.\n",
-+ val);
-+ }
-+ if (core_if->hwcfg2.b.hs_phy_type) {
-+ if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
-+ (core_if->hwcfg2.b.hs_phy_type == 1)) {
-+ val = DWC_PHY_TYPE_PARAM_UTMI;
-+ } else {
-+ val = DWC_PHY_TYPE_PARAM_ULPI;
-+ }
-+ }
-+ retval = -DWC_E_INVALID;
-+ }
-+#endif
-+ core_if->core_params->phy_type = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->phy_type;
-+}
-+
-+int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for speed parameter\n");
-+ DWC_WARN("max_speed parameter must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+ if ((val == 0)
-+ && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) {
-+ if (dwc_otg_param_initialized(core_if->core_params->speed)) {
-+ DWC_ERROR
-+ ("%d invalid for speed paremter. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ (dwc_otg_get_param_phy_type(core_if) ==
-+ DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
-+ retval = -DWC_E_INVALID;
-+ }
-+ core_if->core_params->speed = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->speed;
-+}
-+
-+int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN
-+ ("Wrong value for host_ls_low_power_phy_clk parameter\n");
-+ DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)
-+ && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->host_ls_low_power_phy_clk)) {
-+ DWC_ERROR
-+ ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n",
-+ val);
-+ }
-+ val =
-+ (dwc_otg_get_param_phy_type(core_if) ==
-+ DWC_PHY_TYPE_PARAM_FS) ?
-+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ :
-+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->host_ls_low_power_phy_clk = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->host_ls_low_power_phy_clk;
-+}
-+
-+int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for phy_ulpi_ddr\n");
-+ DWC_WARN("phy_upli_ddr must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->phy_ulpi_ddr = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->phy_ulpi_ddr;
-+}
-+
-+int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n");
-+ DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->phy_ulpi_ext_vbus = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->phy_ulpi_ext_vbus;
-+}
-+
-+int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) {
-+ DWC_WARN("Wrong valaue for phy_utmi_width\n");
-+ DWC_WARN("phy_utmi_width must be 8 or 16\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->phy_utmi_width = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->phy_utmi_width;
-+}
-+
-+int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong valaue for ulpi_fs_ls\n");
-+ DWC_WARN("ulpi_fs_ls must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->ulpi_fs_ls = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->ulpi_fs_ls;
-+}
-+
-+int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong valaue for ts_dline\n");
-+ DWC_WARN("ts_dline must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->ts_dline = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->ts_dline;
-+}
-+
-+int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong valaue for i2c_enable\n");
-+ DWC_WARN("i2c_enable must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+#ifndef NO_FS_PHY_HW_CHECK
-+ if (val == 1 && core_if->hwcfg3.b.i2c == 0) {
-+ if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for i2c_enable. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+#endif
-+
-+ core_if->core_params->i2c_enable = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->i2c_enable;
-+}
-+
-+int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val, int fifo_num)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
-+ DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n");
-+ DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val >
-+ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) {
-+ DWC_ERROR
-+ ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n",
-+ val, fifo_num);
-+ }
-+ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int fifo_num)
-+{
-+ return core_if->core_params->dev_perio_tx_fifo_size[fifo_num];
-+}
-+
-+int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
-+ int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n");
-+ DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->en_multiple_tx_fifo)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->en_multiple_tx_fifo = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->en_multiple_tx_fifo;
-+}
-+
-+int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val,
-+ int fifo_num)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
-+ DWC_WARN("Wrong value for dev_tx_fifo_size\n");
-+ DWC_WARN("dev_tx_fifo_size must be 4-768\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val >
-+ (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->dev_tx_fifo_size[fifo_num])) {
-+ DWC_ERROR
-+ ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n",
-+ val, fifo_num);
-+ }
-+ val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->dev_tx_fifo_size[fifo_num] = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int fifo_num)
-+{
-+ return core_if->core_params->dev_tx_fifo_size[fifo_num];
-+}
-+
-+int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 7)) {
-+ DWC_WARN("Wrong value for thr_ctl\n");
-+ DWC_WARN("thr_ctl must be 0-7\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val != 0) &&
-+ (!dwc_otg_get_param_dma_enable(core_if) ||
-+ !core_if->hwcfg4.b.ded_fifo_en)) {
-+ if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter thr_ctl. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->thr_ctl = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->thr_ctl;
-+}
-+
-+int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("Wrong value for lpm_enable\n");
-+ DWC_WARN("lpm_enable must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val && !core_if->hwcfg3.b.otg_lpm_en) {
-+ if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter lpm_enable. Check HW configuration.\n",
-+ val);
-+ }
-+ val = 0;
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->lpm_enable = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->lpm_enable;
-+}
-+
-+int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
-+ DWC_WARN("Wrong valaue for tx_thr_length\n");
-+ DWC_WARN("tx_thr_length must be 8 - 128\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->tx_thr_length = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->tx_thr_length;
-+}
-+
-+int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
-+ DWC_WARN("Wrong valaue for rx_thr_length\n");
-+ DWC_WARN("rx_thr_length must be 8 - 128\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->rx_thr_length = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->rx_thr_length;
-+}
-+
-+int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ if (DWC_OTG_PARAM_TEST(val, 1, 1) &&
-+ DWC_OTG_PARAM_TEST(val, 4, 4) &&
-+ DWC_OTG_PARAM_TEST(val, 8, 8) &&
-+ DWC_OTG_PARAM_TEST(val, 16, 16) &&
-+ DWC_OTG_PARAM_TEST(val, 32, 32) &&
-+ DWC_OTG_PARAM_TEST(val, 64, 64) &&
-+ DWC_OTG_PARAM_TEST(val, 128, 128) &&
-+ DWC_OTG_PARAM_TEST(val, 256, 256)) {
-+ DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val);
-+ return -DWC_E_INVALID;
-+ }
-+ core_if->core_params->dma_burst_size = val;
-+ return 0;
-+}
-+
-+int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dma_burst_size;
-+}
-+
-+int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val);
-+ return -DWC_E_INVALID;
-+ }
-+ if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) {
-+ if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter pti_enable. Check HW configuration.\n",
-+ val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->pti_enable = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->pti_enable;
-+}
-+
-+int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val);
-+ return -DWC_E_INVALID;
-+ }
-+ if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) {
-+ if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter mpi_enable. Check HW configuration.\n",
-+ val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->mpi_enable = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->mpi_enable;
-+}
-+
-+int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val);
-+ return -DWC_E_INVALID;
-+ }
-+ if (val && (core_if->hwcfg3.b.adp_supp == 0)) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->adp_supp_enable)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter adp_enable. Check HW configuration.\n",
-+ val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->adp_supp_enable = val;
-+ /*Set OTG version 2.0 in case of enabling ADP*/
-+ if (val)
-+ dwc_otg_set_param_otg_ver(core_if, 1);
-+
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->adp_supp_enable;
-+}
-+
-+int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val);
-+ DWC_WARN("ic_usb_cap must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) {
-+ if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n",
-+ val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->ic_usb_cap = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->ic_usb_cap;
-+}
-+
-+int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 1;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
-+ DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val);
-+ DWC_WARN("ahb_thr_ratio must be 0 - 3\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (val
-+ && (core_if->snpsid < OTG_CORE_REV_2_81a
-+ || !dwc_otg_get_param_thr_ctl(core_if))) {
-+ valid = 0;
-+ } else if (val
-+ && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) <
-+ 4)) {
-+ valid = 0;
-+ }
-+ if (valid == 0) {
-+ if (dwc_otg_param_initialized
-+ (core_if->core_params->ahb_thr_ratio)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n",
-+ val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+
-+ core_if->core_params->ahb_thr_ratio = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->ahb_thr_ratio;
-+}
-+
-+int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 1;
-+ hwcfg4_data_t hwcfg4 = {.d32 = 0 };
-+ hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
-+ DWC_WARN("`%d' invalid for parameter `power_down'\n", val);
-+ DWC_WARN("power_down must be 0 - 2\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) {
-+ valid = 0;
-+ }
-+ if ((val == 3)
-+ && ((core_if->snpsid < OTG_CORE_REV_3_00a)
-+ || (hwcfg4.b.xhiber == 0))) {
-+ valid = 0;
-+ }
-+ if (valid == 0) {
-+ if (dwc_otg_param_initialized(core_if->core_params->power_down)) {
-+ DWC_ERROR
-+ ("%d invalid for parameter power_down. Check HW configuration.\n",
-+ val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->power_down = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->power_down;
-+}
-+
-+int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 1;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val);
-+ DWC_WARN("reload_ctl must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) {
-+ valid = 0;
-+ }
-+ if (valid == 0) {
-+ if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) {
-+ DWC_ERROR("%d invalid for parameter reload_ctl."
-+ "Check HW configuration.\n", val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->reload_ctl = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->reload_ctl;
-+}
-+
-+int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 1;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val);
-+ DWC_WARN("dev_out_nak must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) ||
-+ !(core_if->core_params->dma_desc_enable))) {
-+ valid = 0;
-+ }
-+ if (valid == 0) {
-+ if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) {
-+ DWC_ERROR("%d invalid for parameter dev_out_nak."
-+ "Check HW configuration.\n", val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->dev_out_nak = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->dev_out_nak;
-+}
-+
-+int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 1;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val);
-+ DWC_WARN("cont_on_bna must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) ||
-+ !(core_if->core_params->dma_desc_enable))) {
-+ valid = 0;
-+ }
-+ if (valid == 0) {
-+ if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) {
-+ DWC_ERROR("%d invalid for parameter cont_on_bna."
-+ "Check HW configuration.\n", val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->cont_on_bna = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->cont_on_bna;
-+}
-+
-+int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+ int valid = 1;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val);
-+ DWC_WARN("ahb_single must be 0 or 1\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
-+ valid = 0;
-+ }
-+ if (valid == 0) {
-+ if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) {
-+ DWC_ERROR("%d invalid for parameter ahb_single."
-+ "Check HW configuration.\n", val);
-+ }
-+ retval = -DWC_E_INVALID;
-+ val = 0;
-+ }
-+ core_if->core_params->ahb_single = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->ahb_single;
-+}
-+
-+int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val)
-+{
-+ int retval = 0;
-+
-+ if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
-+ DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val);
-+ DWC_WARN
-+ ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ core_if->core_params->otg_ver = val;
-+ return retval;
-+}
-+
-+int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->core_params->otg_ver;
-+}
-+
-+uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if)
-+{
-+ gotgctl_data_t otgctl;
-+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ return otgctl.b.hstnegscs;
-+}
-+
-+uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if)
-+{
-+ gotgctl_data_t otgctl;
-+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ return otgctl.b.sesreqscs;
-+}
-+
-+void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ if(core_if->otg_ver == 0) {
-+ gotgctl_data_t otgctl;
-+ otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ otgctl.b.hnpreq = val;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32);
-+ } else {
-+ core_if->otg_sts = val;
-+ }
-+}
-+
-+uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->snpsid;
-+}
-+
-+uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if)
-+{
-+ gintsts_data_t gintsts;
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ return gintsts.b.curmode;
-+}
-+
-+uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if)
-+{
-+ gusbcfg_data_t usbcfg;
-+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ return usbcfg.b.hnpcap;
-+}
-+
-+void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ gusbcfg_data_t usbcfg;
-+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ usbcfg.b.hnpcap = val;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
-+}
-+
-+uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if)
-+{
-+ gusbcfg_data_t usbcfg;
-+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ return usbcfg.b.srpcap;
-+}
-+
-+void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ gusbcfg_data_t usbcfg;
-+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ usbcfg.b.srpcap = val;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
-+}
-+
-+uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if)
-+{
-+ dcfg_data_t dcfg;
-+ /* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */
-+
-+ dcfg.d32 = -1; //GRAYG
-+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if);
-+ if (NULL == core_if)
-+ DWC_ERROR("reg request with NULL core_if\n");
-+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__,
-+ core_if, core_if->dev_if);
-+ if (NULL == core_if->dev_if)
-+ DWC_ERROR("reg request with NULL dev_if\n");
-+ DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->"
-+ "dev_global_regs(%p)\n", __func__,
-+ core_if, core_if->dev_if,
-+ core_if->dev_if->dev_global_regs);
-+ if (NULL == core_if->dev_if->dev_global_regs)
-+ DWC_ERROR("reg request with NULL dev_global_regs\n");
-+ else {
-+ DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->"
-+ "dev_global_regs(%p)->dcfg = %p\n", __func__,
-+ core_if, core_if->dev_if,
-+ core_if->dev_if->dev_global_regs,
-+ &core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ }
-+ return dcfg.b.devspd;
-+}
-+
-+void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ dcfg_data_t dcfg;
-+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devspd = val;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
-+}
-+
-+uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
-+ return hprt0.b.prtconnsts;
-+}
-+
-+uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if)
-+{
-+ dsts_data_t dsts;
-+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+ return dsts.b.enumspd;
-+}
-+
-+uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
-+ return hprt0.b.prtpwr;
-+
-+}
-+
-+uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if)
-+{
-+ return core_if->hibernation_suspend;
-+}
-+
-+void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = val;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+}
-+
-+uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
-+ return hprt0.b.prtsusp;
-+
-+}
-+
-+void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = val;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+}
-+
-+uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if)
-+{
-+ hfir_data_t hfir;
-+ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
-+ return hfir.b.frint;
-+
-+}
-+
-+void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ hfir_data_t hfir;
-+ uint32_t fram_int;
-+ fram_int = calc_frame_interval(core_if);
-+ hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
-+ if (!core_if->core_params->reload_ctl) {
-+ DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is"
-+ "not set to 1.\nShould load driver with reload_ctl=1"
-+ " module parameter\n");
-+ return;
-+ }
-+ switch (fram_int) {
-+ case 3750:
-+ if ((val < 3350) || (val > 4150)) {
-+ DWC_WARN("HFIR interval for HS core and 30 MHz"
-+ "clock freq should be from 3350 to 4150\n");
-+ return;
-+ }
-+ break;
-+ case 30000:
-+ if ((val < 26820) || (val > 33180)) {
-+ DWC_WARN("HFIR interval for FS/LS core and 30 MHz"
-+ "clock freq should be from 26820 to 33180\n");
-+ return;
-+ }
-+ break;
-+ case 6000:
-+ if ((val < 5360) || (val > 6640)) {
-+ DWC_WARN("HFIR interval for HS core and 48 MHz"
-+ "clock freq should be from 5360 to 6640\n");
-+ return;
-+ }
-+ break;
-+ case 48000:
-+ if ((val < 42912) || (val > 53088)) {
-+ DWC_WARN("HFIR interval for FS/LS core and 48 MHz"
-+ "clock freq should be from 42912 to 53088\n");
-+ return;
-+ }
-+ break;
-+ case 7500:
-+ if ((val < 6700) || (val > 8300)) {
-+ DWC_WARN("HFIR interval for HS core and 60 MHz"
-+ "clock freq should be from 6700 to 8300\n");
-+ return;
-+ }
-+ break;
-+ case 60000:
-+ if ((val < 53640) || (val > 65536)) {
-+ DWC_WARN("HFIR interval for FS/LS core and 60 MHz"
-+ "clock freq should be from 53640 to 65536\n");
-+ return;
-+ }
-+ break;
-+ default:
-+ DWC_WARN("Unknown frame interval\n");
-+ return;
-+ break;
-+
-+ }
-+ hfir.b.frint = val;
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32);
-+}
-+
-+uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if)
-+{
-+ hcfg_data_t hcfg;
-+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
-+ return hcfg.b.modechtimen;
-+
-+}
-+
-+void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ hcfg_data_t hcfg;
-+ hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
-+ hcfg.b.modechtimen = val;
-+ DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+}
-+
-+void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtres = val;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+}
-+
-+uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if)
-+{
-+ dctl_data_t dctl;
-+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
-+ return dctl.b.rmtwkupsig;
-+}
-+
-+uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+
-+ DWC_ASSERT(!
-+ ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts),
-+ "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n",
-+ core_if->lx_state, lpmcfg.b.prt_sleep_sts);
-+
-+ return lpmcfg.b.prt_sleep_sts;
-+}
-+
-+uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ return lpmcfg.b.rem_wkup_en;
-+}
-+
-+uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ return lpmcfg.b.appl_resp;
-+}
-+
-+void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ lpmcfg.b.appl_resp = val;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
-+}
-+
-+uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ return lpmcfg.b.hsic_connect;
-+}
-+
-+void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ lpmcfg.b.hsic_connect = val;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
-+}
-+
-+uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ return lpmcfg.b.inv_sel_hsic;
-+
-+}
-+
-+void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ lpmcfg.b.inv_sel_hsic = val;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
-+}
-+
-+uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+}
-+
-+void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val);
-+}
-+
-+uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+}
-+
-+void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val);
-+}
-+
-+uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
-+}
-+
-+void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val);
-+}
-+
-+uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
-+}
-+
-+void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val);
-+}
-+
-+uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl);
-+}
-+
-+void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val);
-+}
-+
-+uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->ggpio);
-+}
-+
-+void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val);
-+}
-+
-+uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(core_if->host_if->hprt0);
-+
-+}
-+
-+void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, val);
-+}
-+
-+uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->guid);
-+}
-+
-+void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val)
-+{
-+ DWC_WRITE_REG32(&core_if->core_global_regs->guid, val);
-+}
-+
-+uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if)
-+{
-+ return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
-+}
-+
-+uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if)
-+{
-+ return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103);
-+}
-+
-+/**
-+ * Start the SRP timer to detect when the SRP does not complete within
-+ * 6 seconds.
-+ *
-+ * @param core_if the pointer to core_if strucure.
-+ */
-+void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if)
-+{
-+ core_if->srp_timer_started = 1;
-+ DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ );
-+}
-+
-+void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl);
-+ gotgctl_data_t mem;
-+ gotgctl_data_t val;
-+
-+ val.d32 = DWC_READ_REG32(addr);
-+ if (val.b.sesreq) {
-+ DWC_ERROR("Session Request Already active!\n");
-+ return;
-+ }
-+
-+ DWC_INFO("Session Request Initated\n"); //NOTICE
-+ mem.d32 = DWC_READ_REG32(addr);
-+ mem.b.sesreq = 1;
-+ DWC_WRITE_REG32(addr, mem.d32);
-+
-+ /* Start the SRP timer */
-+ dwc_otg_pcd_start_srp_timer(core_if);
-+ return;
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h
-@@ -0,0 +1,1464 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
-+ * $Revision: #123 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#if !defined(__DWC_CIL_H__)
-+#define __DWC_CIL_H__
-+
-+#include "dwc_list.h"
-+#include "dwc_otg_dbg.h"
-+#include "dwc_otg_regs.h"
-+
-+#include "dwc_otg_core_if.h"
-+#include "dwc_otg_adp.h"
-+
-+/**
-+ * @file
-+ * This file contains the interface to the Core Interface Layer.
-+ */
-+
-+#ifdef DWC_UTE_CFI
-+
-+#define MAX_DMA_DESCS_PER_EP 256
-+
-+/**
-+ * Enumeration for the data buffer mode
-+ */
-+typedef enum _data_buffer_mode {
-+ BM_STANDARD = 0, /* data buffer is in normal mode */
-+ BM_SG = 1, /* data buffer uses the scatter/gather mode */
-+ BM_CONCAT = 2, /* data buffer uses the concatenation mode */
-+ BM_CIRCULAR = 3, /* data buffer uses the circular DMA mode */
-+ BM_ALIGN = 4 /* data buffer is in buffer alignment mode */
-+} data_buffer_mode_e;
-+#endif //DWC_UTE_CFI
-+
-+/** Macros defined for DWC OTG HW Release version */
-+
-+#define OTG_CORE_REV_2_60a 0x4F54260A
-+#define OTG_CORE_REV_2_71a 0x4F54271A
-+#define OTG_CORE_REV_2_72a 0x4F54272A
-+#define OTG_CORE_REV_2_80a 0x4F54280A
-+#define OTG_CORE_REV_2_81a 0x4F54281A
-+#define OTG_CORE_REV_2_90a 0x4F54290A
-+#define OTG_CORE_REV_2_91a 0x4F54291A
-+#define OTG_CORE_REV_2_92a 0x4F54292A
-+#define OTG_CORE_REV_2_93a 0x4F54293A
-+#define OTG_CORE_REV_2_94a 0x4F54294A
-+#define OTG_CORE_REV_3_00a 0x4F54300A
-+
-+/**
-+ * Information for each ISOC packet.
-+ */
-+typedef struct iso_pkt_info {
-+ uint32_t offset;
-+ uint32_t length;
-+ int32_t status;
-+} iso_pkt_info_t;
-+
-+/**
-+ * The <code>dwc_ep</code> structure represents the state of a single
-+ * endpoint when acting in device mode. It contains the data items
-+ * needed for an endpoint to be activated and transfer packets.
-+ */
-+typedef struct dwc_ep {
-+ /** EP number used for register address lookup */
-+ uint8_t num;
-+ /** EP direction 0 = OUT */
-+ unsigned is_in:1;
-+ /** EP active. */
-+ unsigned active:1;
-+
-+ /**
-+ * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic
-+ * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/
-+ unsigned tx_fifo_num:4;
-+ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */
-+ unsigned type:2;
-+#define DWC_OTG_EP_TYPE_CONTROL 0
-+#define DWC_OTG_EP_TYPE_ISOC 1
-+#define DWC_OTG_EP_TYPE_BULK 2
-+#define DWC_OTG_EP_TYPE_INTR 3
-+
-+ /** DATA start PID for INTR and BULK EP */
-+ unsigned data_pid_start:1;
-+ /** Frame (even/odd) for ISOC EP */
-+ unsigned even_odd_frame:1;
-+ /** Max Packet bytes */
-+ unsigned maxpacket:11;
-+
-+ /** Max Transfer size */
-+ uint32_t maxxfer;
-+
-+ /** @name Transfer state */
-+ /** @{ */
-+
-+ /**
-+ * Pointer to the beginning of the transfer buffer -- do not modify
-+ * during transfer.
-+ */
-+
-+ dwc_dma_t dma_addr;
-+
-+ dwc_dma_t dma_desc_addr;
-+ dwc_otg_dev_dma_desc_t *desc_addr;
-+
-+ uint8_t *start_xfer_buff;
-+ /** pointer to the transfer buffer */
-+ uint8_t *xfer_buff;
-+ /** Number of bytes to transfer */
-+ unsigned xfer_len:19;
-+ /** Number of bytes transferred. */
-+ unsigned xfer_count:19;
-+ /** Sent ZLP */
-+ unsigned sent_zlp:1;
-+ /** Total len for control transfer */
-+ unsigned total_len:19;
-+
-+ /** stall clear flag */
-+ unsigned stall_clear_flag:1;
-+
-+ /** SETUP pkt cnt rollover flag for EP0 out*/
-+ unsigned stp_rollover;
-+
-+#ifdef DWC_UTE_CFI
-+ /* The buffer mode */
-+ data_buffer_mode_e buff_mode;
-+
-+ /* The chain of DMA descriptors.
-+ * MAX_DMA_DESCS_PER_EP will be allocated for each active EP.
-+ */
-+ dwc_otg_dma_desc_t *descs;
-+
-+ /* The DMA address of the descriptors chain start */
-+ dma_addr_t descs_dma_addr;
-+ /** This variable stores the length of the last enqueued request */
-+ uint32_t cfi_req_len;
-+#endif //DWC_UTE_CFI
-+
-+/** Max DMA Descriptor count for any EP */
-+#define MAX_DMA_DESC_CNT 256
-+ /** Allocated DMA Desc count */
-+ uint32_t desc_cnt;
-+
-+ /** bInterval */
-+ uint32_t bInterval;
-+ /** Next frame num to setup next ISOC transfer */
-+ uint32_t frame_num;
-+ /** Indicates SOF number overrun in DSTS */
-+ uint8_t frm_overrun;
-+
-+#ifdef DWC_UTE_PER_IO
-+ /** Next frame num for which will be setup DMA Desc */
-+ uint32_t xiso_frame_num;
-+ /** bInterval */
-+ uint32_t xiso_bInterval;
-+ /** Count of currently active transfers - shall be either 0 or 1 */
-+ int xiso_active_xfers;
-+ int xiso_queued_xfers;
-+#endif
-+#ifdef DWC_EN_ISOC
-+ /**
-+ * Variables specific for ISOC EPs
-+ *
-+ */
-+ /** DMA addresses of ISOC buffers */
-+ dwc_dma_t dma_addr0;
-+ dwc_dma_t dma_addr1;
-+
-+ dwc_dma_t iso_dma_desc_addr;
-+ dwc_otg_dev_dma_desc_t *iso_desc_addr;
-+
-+ /** pointer to the transfer buffers */
-+ uint8_t *xfer_buff0;
-+ uint8_t *xfer_buff1;
-+
-+ /** number of ISOC Buffer is processing */
-+ uint32_t proc_buf_num;
-+ /** Interval of ISOC Buffer processing */
-+ uint32_t buf_proc_intrvl;
-+ /** Data size for regular frame */
-+ uint32_t data_per_frame;
-+
-+ /* todo - pattern data support is to be implemented in the future */
-+ /** Data size for pattern frame */
-+ uint32_t data_pattern_frame;
-+ /** Frame number of pattern data */
-+ uint32_t sync_frame;
-+
-+ /** bInterval */
-+ uint32_t bInterval;
-+ /** ISO Packet number per frame */
-+ uint32_t pkt_per_frm;
-+ /** Next frame num for which will be setup DMA Desc */
-+ uint32_t next_frame;
-+ /** Number of packets per buffer processing */
-+ uint32_t pkt_cnt;
-+ /** Info for all isoc packets */
-+ iso_pkt_info_t *pkt_info;
-+ /** current pkt number */
-+ uint32_t cur_pkt;
-+ /** current pkt number */
-+ uint8_t *cur_pkt_addr;
-+ /** current pkt number */
-+ uint32_t cur_pkt_dma_addr;
-+#endif /* DWC_EN_ISOC */
-+
-+/** @} */
-+} dwc_ep_t;
-+
-+/*
-+ * Reasons for halting a host channel.
-+ */
-+typedef enum dwc_otg_halt_status {
-+ DWC_OTG_HC_XFER_NO_HALT_STATUS,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ DWC_OTG_HC_XFER_URB_COMPLETE,
-+ DWC_OTG_HC_XFER_ACK,
-+ DWC_OTG_HC_XFER_NAK,
-+ DWC_OTG_HC_XFER_NYET,
-+ DWC_OTG_HC_XFER_STALL,
-+ DWC_OTG_HC_XFER_XACT_ERR,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN,
-+ DWC_OTG_HC_XFER_BABBLE_ERR,
-+ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
-+ DWC_OTG_HC_XFER_AHB_ERR,
-+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE
-+} dwc_otg_halt_status_e;
-+
-+/**
-+ * Host channel descriptor. This structure represents the state of a single
-+ * host channel when acting in host mode. It contains the data items needed to
-+ * transfer packets to an endpoint via a host channel.
-+ */
-+typedef struct dwc_hc {
-+ /** Host channel number used for register address lookup */
-+ uint8_t hc_num;
-+
-+ /** Device to access */
-+ unsigned dev_addr:7;
-+
-+ /** EP to access */
-+ unsigned ep_num:4;
-+
-+ /** EP direction. 0: OUT, 1: IN */
-+ unsigned ep_is_in:1;
-+
-+ /**
-+ * EP speed.
-+ * One of the following values:
-+ * - DWC_OTG_EP_SPEED_LOW
-+ * - DWC_OTG_EP_SPEED_FULL
-+ * - DWC_OTG_EP_SPEED_HIGH
-+ */
-+ unsigned speed:2;
-+#define DWC_OTG_EP_SPEED_LOW 0
-+#define DWC_OTG_EP_SPEED_FULL 1
-+#define DWC_OTG_EP_SPEED_HIGH 2
-+
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - DWC_OTG_EP_TYPE_CONTROL: 0
-+ * - DWC_OTG_EP_TYPE_ISOC: 1
-+ * - DWC_OTG_EP_TYPE_BULK: 2
-+ * - DWC_OTG_EP_TYPE_INTR: 3
-+ */
-+ unsigned ep_type:2;
-+
-+ /** Max packet size in bytes */
-+ unsigned max_packet:11;
-+
-+ /**
-+ * PID for initial transaction.
-+ * 0: DATA0,<br>
-+ * 1: DATA2,<br>
-+ * 2: DATA1,<br>
-+ * 3: MDATA (non-Control EP),
-+ * SETUP (Control EP)
-+ */
-+ unsigned data_pid_start:2;
-+#define DWC_OTG_HC_PID_DATA0 0
-+#define DWC_OTG_HC_PID_DATA2 1
-+#define DWC_OTG_HC_PID_DATA1 2
-+#define DWC_OTG_HC_PID_MDATA 3
-+#define DWC_OTG_HC_PID_SETUP 3
-+
-+ /** Number of periodic transactions per (micro)frame */
-+ unsigned multi_count:2;
-+
-+ /** @name Transfer State */
-+ /** @{ */
-+
-+ /** Pointer to the current transfer buffer position. */
-+ uint8_t *xfer_buff;
-+ /**
-+ * In Buffer DMA mode this buffer will be used
-+ * if xfer_buff is not DWORD aligned.
-+ */
-+ dwc_dma_t align_buff;
-+ /** Total number of bytes to transfer. */
-+ uint32_t xfer_len;
-+ /** Number of bytes transferred so far. */
-+ uint32_t xfer_count;
-+ /** Packet count at start of transfer.*/
-+ uint16_t start_pkt_count;
-+
-+ /**
-+ * Flag to indicate whether the transfer has been started. Set to 1 if
-+ * it has been started, 0 otherwise.
-+ */
-+ uint8_t xfer_started;
-+
-+ /**
-+ * Set to 1 to indicate that a PING request should be issued on this
-+ * channel. If 0, process normally.
-+ */
-+ uint8_t do_ping;
-+
-+ /**
-+ * Set to 1 to indicate that the error count for this transaction is
-+ * non-zero. Set to 0 if the error count is 0.
-+ */
-+ uint8_t error_state;
-+
-+ /**
-+ * Set to 1 to indicate that this channel should be halted the next
-+ * time a request is queued for the channel. This is necessary in
-+ * slave mode if no request queue space is available when an attempt
-+ * is made to halt the channel.
-+ */
-+ uint8_t halt_on_queue;
-+
-+ /**
-+ * Set to 1 if the host channel has been halted, but the core is not
-+ * finished flushing queued requests. Otherwise 0.
-+ */
-+ uint8_t halt_pending;
-+
-+ /**
-+ * Reason for halting the host channel.
-+ */
-+ dwc_otg_halt_status_e halt_status;
-+
-+ /*
-+ * Split settings for the host channel
-+ */
-+ uint8_t do_split; /**< Enable split for the channel */
-+ uint8_t complete_split; /**< Enable complete split */
-+ uint8_t hub_addr; /**< Address of high speed hub */
-+
-+ uint8_t port_addr; /**< Port of the low/full speed device */
-+ /** Split transaction position
-+ * One of the following values:
-+ * - DWC_HCSPLIT_XACTPOS_MID
-+ * - DWC_HCSPLIT_XACTPOS_BEGIN
-+ * - DWC_HCSPLIT_XACTPOS_END
-+ * - DWC_HCSPLIT_XACTPOS_ALL */
-+ uint8_t xact_pos;
-+
-+ /** Set when the host channel does a short read. */
-+ uint8_t short_read;
-+
-+ /**
-+ * Number of requests issued for this channel since it was assigned to
-+ * the current transfer (not counting PINGs).
-+ */
-+ uint8_t requests;
-+
-+ /**
-+ * Queue Head for the transfer being processed by this channel.
-+ */
-+ struct dwc_otg_qh *qh;
-+
-+ /** @} */
-+
-+ /** Entry in list of host channels. */
-+ DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry;
-+
-+ /** @name Descriptor DMA support */
-+ /** @{ */
-+
-+ /** Number of Transfer Descriptors */
-+ uint16_t ntd;
-+
-+ /** Descriptor List DMA address */
-+ dwc_dma_t desc_list_addr;
-+
-+ /** Scheduling micro-frame bitmap. */
-+ uint8_t schinfo;
-+
-+ /** @} */
-+} dwc_hc_t;
-+
-+/**
-+ * The following parameters may be specified when starting the module. These
-+ * parameters define how the DWC_otg controller should be configured.
-+ */
-+typedef struct dwc_otg_core_params {
-+ int32_t opt;
-+
-+ /**
-+ * Specifies the OTG capabilities. The driver will automatically
-+ * detect the value for this parameter if none is specified.
-+ * 0 - HNP and SRP capable (default)
-+ * 1 - SRP Only capable
-+ * 2 - No HNP/SRP capable
-+ */
-+ int32_t otg_cap;
-+
-+ /**
-+ * Specifies whether to use slave or DMA mode for accessing the data
-+ * FIFOs. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - Slave
-+ * 1 - DMA (default, if available)
-+ */
-+ int32_t dma_enable;
-+
-+ /**
-+ * When DMA mode is enabled specifies whether to use address DMA or DMA
-+ * Descriptor mode for accessing the data FIFOs in device mode. The driver
-+ * will automatically detect the value for this if none is specified.
-+ * 0 - address DMA
-+ * 1 - DMA Descriptor(default, if available)
-+ */
-+ int32_t dma_desc_enable;
-+ /** The DMA Burst size (applicable only for External DMA
-+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ */
-+ int32_t dma_burst_size; /* Translate this to GAHBCFG values */
-+
-+ /**
-+ * Specifies the maximum speed of operation in host and device mode.
-+ * The actual speed depends on the speed of the attached device and
-+ * the value of phy_type. The actual speed depends on the speed of the
-+ * attached device.
-+ * 0 - High Speed (default)
-+ * 1 - Full Speed
-+ */
-+ int32_t speed;
-+ /** Specifies whether low power mode is supported when attached
-+ * to a Full Speed or Low Speed device in host mode.
-+ * 0 - Don't support low power mode (default)
-+ * 1 - Support low power mode
-+ */
-+ int32_t host_support_fs_ls_low_power;
-+
-+ /** Specifies the PHY clock rate in low power mode when connected to a
-+ * Low Speed device in host mode. This parameter is applicable only if
-+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
-+ * then defaults to 6 MHZ otherwise 48 MHZ.
-+ *
-+ * 0 - 48 MHz
-+ * 1 - 6 MHz
-+ */
-+ int32_t host_ls_low_power_phy_clk;
-+
-+ /**
-+ * 0 - Use cC FIFO size parameters
-+ * 1 - Allow dynamic FIFO sizing (default)
-+ */
-+ int32_t enable_dynamic_fifo;
-+
-+ /** Total number of 4-byte words in the data FIFO memory. This
-+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-+ * Tx FIFOs.
-+ * 32 to 32768 (default 8192)
-+ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ */
-+ int32_t data_fifo_size;
-+
-+ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1064)
-+ */
-+ int32_t dev_rx_fifo_size;
-+
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode
-+ * when dynamic FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t dev_nperio_tx_fifo_size;
-+
-+ /** Number of 4-byte words in each of the periodic Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+
-+ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_rx_fifo_size;
-+
-+ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode
-+ * when Dynamic FIFO sizing is enabled in the core.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_nperio_tx_fifo_size;
-+
-+ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+ int32_t host_perio_tx_fifo_size;
-+
-+ /** The maximum transfer size supported in bytes.
-+ * 2047 to 65,535 (default 65,535)
-+ */
-+ int32_t max_transfer_size;
-+
-+ /** The maximum number of packets in a transfer.
-+ * 15 to 511 (default 511)
-+ */
-+ int32_t max_packet_count;
-+
-+ /** The number of host channel registers to use.
-+ * 1 to 16 (default 12)
-+ * Note: The FPGA configuration supports a maximum of 12 host channels.
-+ */
-+ int32_t host_channels;
-+
-+ /** The number of endpoints in addition to EP0 available for device
-+ * mode operations.
-+ * 1 to 15 (default 6 IN and OUT)
-+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
-+ * endpoints in addition to EP0.
-+ */
-+ int32_t dev_endpoints;
-+
-+ /**
-+ * Specifies the type of PHY interface to use. By default, the driver
-+ * will automatically detect the phy_type.
-+ *
-+ * 0 - Full Speed PHY
-+ * 1 - UTMI+ (default)
-+ * 2 - ULPI
-+ */
-+ int32_t phy_type;
-+
-+ /**
-+ * Specifies the UTMI+ Data Width. This parameter is
-+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
-+ * PHY_TYPE, this parameter indicates the data width between
-+ * the MAC and the ULPI Wrapper.) Also, this parameter is
-+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
-+ * to "8 and 16 bits", meaning that the core has been
-+ * configured to work at either data path width.
-+ *
-+ * 8 or 16 bits (default 16)
-+ */
-+ int32_t phy_utmi_width;
-+
-+ /**
-+ * Specifies whether the ULPI operates at double or single
-+ * data rate. This parameter is only applicable if PHY_TYPE is
-+ * ULPI.
-+ *
-+ * 0 - single data rate ULPI interface with 8 bit wide data
-+ * bus (default)
-+ * 1 - double data rate ULPI interface with 4 bit wide data
-+ * bus
-+ */
-+ int32_t phy_ulpi_ddr;
-+
-+ /**
-+ * Specifies whether to use the internal or external supply to
-+ * drive the vbus with a ULPI phy.
-+ */
-+ int32_t phy_ulpi_ext_vbus;
-+
-+ /**
-+ * Specifies whether to use the I2Cinterface for full speed PHY. This
-+ * parameter is only applicable if PHY_TYPE is FS.
-+ * 0 - No (default)
-+ * 1 - Yes
-+ */
-+ int32_t i2c_enable;
-+
-+ int32_t ulpi_fs_ls;
-+
-+ int32_t ts_dline;
-+
-+ /**
-+ * Specifies whether dedicated transmit FIFOs are
-+ * enabled for non periodic IN endpoints in device mode
-+ * 0 - No
-+ * 1 - Yes
-+ */
-+ int32_t en_multiple_tx_fifo;
-+
-+ /** Number of 4-byte words in each of the Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-+
-+ /** Thresholding enable flag-
-+ * bit 0 - enable non-ISO Tx thresholding
-+ * bit 1 - enable ISO Tx thresholding
-+ * bit 2 - enable Rx thresholding
-+ */
-+ uint32_t thr_ctl;
-+
-+ /** Thresholding length for Tx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t tx_thr_length;
-+
-+ /** Thresholding length for Rx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+ uint32_t rx_thr_length;
-+
-+ /**
-+ * Specifies whether LPM (Link Power Management) support is enabled
-+ */
-+ int32_t lpm_enable;
-+
-+ /** Per Transfer Interrupt
-+ * mode enable flag
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ int32_t pti_enable;
-+
-+ /** Multi Processor Interrupt
-+ * mode enable flag
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ int32_t mpi_enable;
-+
-+ /** IS_USB Capability
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ int32_t ic_usb_cap;
-+
-+ /** AHB Threshold Ratio
-+ * 2'b00 AHB Threshold = MAC Threshold
-+ * 2'b01 AHB Threshold = 1/2 MAC Threshold
-+ * 2'b10 AHB Threshold = 1/4 MAC Threshold
-+ * 2'b11 AHB Threshold = 1/8 MAC Threshold
-+ */
-+ int32_t ahb_thr_ratio;
-+
-+ /** ADP Support
-+ * 1 - Enabled
-+ * 0 - Disabled
-+ */
-+ int32_t adp_supp_enable;
-+
-+ /** HFIR Reload Control
-+ * 0 - The HFIR cannot be reloaded dynamically.
-+ * 1 - Allow dynamic reloading of the HFIR register during runtime.
-+ */
-+ int32_t reload_ctl;
-+
-+ /** DCFG: Enable device Out NAK
-+ * 0 - The core does not set NAK after Bulk Out transfer complete.
-+ * 1 - The core sets NAK after Bulk OUT transfer complete.
-+ */
-+ int32_t dev_out_nak;
-+
-+ /** DCFG: Enable Continue on BNA
-+ * After receiving BNA interrupt the core disables the endpoint,when the
-+ * endpoint is re-enabled by the application the core starts processing
-+ * 0 - from the DOEPDMA descriptor
-+ * 1 - from the descriptor which received the BNA.
-+ */
-+ int32_t cont_on_bna;
-+
-+ /** GAHBCFG: AHB Single Support
-+ * This bit when programmed supports SINGLE transfers for remainder
-+ * data in a transfer for DMA mode of operation.
-+ * 0 - in this case the remainder data will be sent using INCR burst size.
-+ * 1 - in this case the remainder data will be sent using SINGLE burst size.
-+ */
-+ int32_t ahb_single;
-+
-+ /** Core Power down mode
-+ * 0 - No Power Down is enabled
-+ * 1 - Reserved
-+ * 2 - Complete Power Down (Hibernation)
-+ */
-+ int32_t power_down;
-+
-+ /** OTG revision supported
-+ * 0 - OTG 1.3 revision
-+ * 1 - OTG 2.0 revision
-+ */
-+ int32_t otg_ver;
-+
-+} dwc_otg_core_params_t;
-+
-+#ifdef DEBUG
-+struct dwc_otg_core_if;
-+typedef struct hc_xfer_info {
-+ struct dwc_otg_core_if *core_if;
-+ dwc_hc_t *hc;
-+} hc_xfer_info_t;
-+#endif
-+
-+typedef struct ep_xfer_info {
-+ struct dwc_otg_core_if *core_if;
-+ dwc_ep_t *ep;
-+ uint8_t state;
-+} ep_xfer_info_t;
-+/*
-+ * Device States
-+ */
-+typedef enum dwc_otg_lx_state {
-+ /** On state */
-+ DWC_OTG_L0,
-+ /** LPM sleep state*/
-+ DWC_OTG_L1,
-+ /** USB suspend state*/
-+ DWC_OTG_L2,
-+ /** Off state*/
-+ DWC_OTG_L3
-+} dwc_otg_lx_state_e;
-+
-+struct dwc_otg_global_regs_backup {
-+ uint32_t gotgctl_local;
-+ uint32_t gintmsk_local;
-+ uint32_t gahbcfg_local;
-+ uint32_t gusbcfg_local;
-+ uint32_t grxfsiz_local;
-+ uint32_t gnptxfsiz_local;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ uint32_t glpmcfg_local;
-+#endif
-+ uint32_t gi2cctl_local;
-+ uint32_t hptxfsiz_local;
-+ uint32_t pcgcctl_local;
-+ uint32_t gdfifocfg_local;
-+ uint32_t dtxfsiz_local[MAX_EPS_CHANNELS];
-+ uint32_t gpwrdn_local;
-+ uint32_t xhib_pcgcctl;
-+ uint32_t xhib_gpwrdn;
-+};
-+
-+struct dwc_otg_host_regs_backup {
-+ uint32_t hcfg_local;
-+ uint32_t haintmsk_local;
-+ uint32_t hcintmsk_local[MAX_EPS_CHANNELS];
-+ uint32_t hprt0_local;
-+ uint32_t hfir_local;
-+};
-+
-+struct dwc_otg_dev_regs_backup {
-+ uint32_t dcfg;
-+ uint32_t dctl;
-+ uint32_t daintmsk;
-+ uint32_t diepmsk;
-+ uint32_t doepmsk;
-+ uint32_t diepctl[MAX_EPS_CHANNELS];
-+ uint32_t dieptsiz[MAX_EPS_CHANNELS];
-+ uint32_t diepdma[MAX_EPS_CHANNELS];
-+};
-+/**
-+ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
-+ * the DWC_otg controller acting in either host or device mode. It
-+ * represents the programming view of the controller as a whole.
-+ */
-+struct dwc_otg_core_if {
-+ /** Parameters that define how the core should be configured.*/
-+ dwc_otg_core_params_t *core_params;
-+
-+ /** Core Global registers starting at offset 000h. */
-+ dwc_otg_core_global_regs_t *core_global_regs;
-+
-+ /** Device-specific information */
-+ dwc_otg_dev_if_t *dev_if;
-+ /** Host-specific information */
-+ dwc_otg_host_if_t *host_if;
-+
-+ /** Value from SNPSID register */
-+ uint32_t snpsid;
-+
-+ /*
-+ * Set to 1 if the core PHY interface bits in USBCFG have been
-+ * initialized.
-+ */
-+ uint8_t phy_init_done;
-+
-+ /*
-+ * SRP Success flag, set by srp success interrupt in FS I2C mode
-+ */
-+ uint8_t srp_success;
-+ uint8_t srp_timer_started;
-+ /** Timer for SRP. If it expires before SRP is successful
-+ * clear the SRP. */
-+ dwc_timer_t *srp_timer;
-+
-+#ifdef DWC_DEV_SRPCAP
-+ /* This timer is needed to power on the hibernated host core if SRP is not
-+ * initiated on connected SRP capable device for limited period of time
-+ */
-+ uint8_t pwron_timer_started;
-+ dwc_timer_t *pwron_timer;
-+#endif
-+ /* Common configuration information */
-+ /** Power and Clock Gating Control Register */
-+ volatile uint32_t *pcgcctl;
-+#define DWC_OTG_PCGCCTL_OFFSET 0xE00
-+
-+ /** Push/pop addresses for endpoints or host channels.*/
-+ uint32_t *data_fifo[MAX_EPS_CHANNELS];
-+#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
-+#define DWC_OTG_DATA_FIFO_SIZE 0x1000
-+
-+ /** Total RAM for FIFOs (Bytes) */
-+ uint16_t total_fifo_size;
-+ /** Size of Rx FIFO (Bytes) */
-+ uint16_t rx_fifo_size;
-+ /** Size of Non-periodic Tx FIFO (Bytes) */
-+ uint16_t nperio_tx_fifo_size;
-+
-+ /** 1 if DMA is enabled, 0 otherwise. */
-+ uint8_t dma_enable;
-+
-+ /** 1 if DMA descriptor is enabled, 0 otherwise. */
-+ uint8_t dma_desc_enable;
-+
-+ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
-+ uint8_t pti_enh_enable;
-+
-+ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
-+ uint8_t multiproc_int_enable;
-+
-+ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
-+ uint8_t en_multiple_tx_fifo;
-+
-+ /** Set to 1 if multiple packets of a high-bandwidth transfer is in
-+ * process of being queued */
-+ uint8_t queuing_high_bandwidth;
-+
-+ /** Hardware Configuration -- stored here for convenience.*/
-+ hwcfg1_data_t hwcfg1;
-+ hwcfg2_data_t hwcfg2;
-+ hwcfg3_data_t hwcfg3;
-+ hwcfg4_data_t hwcfg4;
-+ fifosize_data_t hptxfsiz;
-+
-+ /** Host and Device Configuration -- stored here for convenience.*/
-+ hcfg_data_t hcfg;
-+ dcfg_data_t dcfg;
-+
-+ /** The operational State, during transations
-+ * (a_host>>a_peripherial and b_device=>b_host) this may not
-+ * match the core but allows the software to determine
-+ * transitions.
-+ */
-+ uint8_t op_state;
-+
-+ /**
-+ * Set to 1 if the HCD needs to be restarted on a session request
-+ * interrupt. This is required if no connector ID status change has
-+ * occurred since the HCD was last disconnected.
-+ */
-+ uint8_t restart_hcd_on_session_req;
-+
-+ /** HCD callbacks */
-+ /** A-Device is a_host */
-+#define A_HOST (1)
-+ /** A-Device is a_suspend */
-+#define A_SUSPEND (2)
-+ /** A-Device is a_peripherial */
-+#define A_PERIPHERAL (3)
-+ /** B-Device is operating as a Peripheral. */
-+#define B_PERIPHERAL (4)
-+ /** B-Device is operating as a Host. */
-+#define B_HOST (5)
-+
-+ /** HCD callbacks */
-+ struct dwc_otg_cil_callbacks *hcd_cb;
-+ /** PCD callbacks */
-+ struct dwc_otg_cil_callbacks *pcd_cb;
-+
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t p_tx_msk;
-+ /** Device mode Periodic Tx FIFO Mask */
-+ uint32_t tx_msk;
-+
-+ /** Workqueue object used for handling several interrupts */
-+ dwc_workq_t *wq_otg;
-+
-+ /** Timer object used for handling "Wakeup Detected" Interrupt */
-+ dwc_timer_t *wkp_timer;
-+ /** This arrays used for debug purposes for DEV OUT NAK enhancement */
-+ uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS];
-+ ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS];
-+ dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS];
-+#ifdef DEBUG
-+ uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
-+
-+ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
-+ dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS];
-+
-+ uint32_t hfnum_7_samples;
-+ uint64_t hfnum_7_frrem_accum;
-+ uint32_t hfnum_0_samples;
-+ uint64_t hfnum_0_frrem_accum;
-+ uint32_t hfnum_other_samples;
-+ uint64_t hfnum_other_frrem_accum;
-+#endif
-+
-+#ifdef DWC_UTE_CFI
-+ uint16_t pwron_rxfsiz;
-+ uint16_t pwron_gnptxfsiz;
-+ uint16_t pwron_txfsiz[15];
-+
-+ uint16_t init_rxfsiz;
-+ uint16_t init_gnptxfsiz;
-+ uint16_t init_txfsiz[15];
-+#endif
-+
-+ /** Lx state of device */
-+ dwc_otg_lx_state_e lx_state;
-+
-+ /** Saved Core Global registers */
-+ struct dwc_otg_global_regs_backup *gr_backup;
-+ /** Saved Host registers */
-+ struct dwc_otg_host_regs_backup *hr_backup;
-+ /** Saved Device registers */
-+ struct dwc_otg_dev_regs_backup *dr_backup;
-+
-+ /** Power Down Enable */
-+ uint32_t power_down;
-+
-+ /** ADP support Enable */
-+ uint32_t adp_enable;
-+
-+ /** ADP structure object */
-+ dwc_otg_adp_t adp;
-+
-+ /** hibernation/suspend flag */
-+ int hibernation_suspend;
-+
-+ /** Device mode extended hibernation flag */
-+ int xhib;
-+
-+ /** OTG revision supported */
-+ uint32_t otg_ver;
-+
-+ /** OTG status flag used for HNP polling */
-+ uint8_t otg_sts;
-+
-+ /** Pointer to either hcd->lock or pcd->lock */
-+ dwc_spinlock_t *lock;
-+
-+ /** Start predict NextEP based on Learning Queue if equal 1,
-+ * also used as counter of disabled NP IN EP's */
-+ uint8_t start_predict;
-+
-+ /** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and
-+ * active, 0xff otherwise */
-+ uint8_t nextep_seq[MAX_EPS_CHANNELS];
-+
-+ /** Index of fisrt EP in nextep_seq array which should be re-enabled **/
-+ uint8_t first_in_nextep_seq;
-+
-+ /** Frame number while entering to ISR - needed for ISOCs **/
-+ uint32_t frame_num;
-+
-+};
-+
-+#ifdef DEBUG
-+/*
-+ * This function is called when transfer is timed out.
-+ */
-+extern void hc_xfer_timeout(void *ptr);
-+#endif
-+
-+/*
-+ * This function is called when transfer is timed out on endpoint.
-+ */
-+extern void ep_xfer_timeout(void *ptr);
-+
-+/*
-+ * The following functions are functions for works
-+ * using during handling some interrupts
-+ */
-+extern void w_conn_id_status_change(void *p);
-+
-+extern void w_wakeup_detected(void *p);
-+
-+/** Saves global register values into system memory. */
-+extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if);
-+/** Saves device register values into system memory. */
-+extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if);
-+/** Saves host register values into system memory. */
-+extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if);
-+/** Restore global register values. */
-+extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if);
-+/** Restore host register values. */
-+extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset);
-+/** Restore device register values. */
-+extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if,
-+ int rem_wakeup);
-+extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if);
-+extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode,
-+ int is_host);
-+
-+extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
-+ int restore_mode, int reset);
-+extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
-+ int rem_wakeup, int reset);
-+
-+/*
-+ * The following functions support initialization of the CIL driver component
-+ * and the DWC_otg controller.
-+ */
-+extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if);
-+
-+/** @name Device CIL Functions
-+ * The following functions support managing the DWC_otg controller in device
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if,
-+ uint32_t * _dest);
-+extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
-+extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
-+extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
-+extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if,
-+ dwc_ep_t * _ep);
-+extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if,
-+ dwc_ep_t * _ep);
-+extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if,
-+ dwc_ep_t * _ep);
-+extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if,
-+ dwc_ep_t * _ep);
-+extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if,
-+ dwc_ep_t * _ep, int _dma);
-+extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
-+extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if,
-+ dwc_ep_t * _ep);
-+extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if);
-+
-+#ifdef DWC_EN_ISOC
-+extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * ep);
-+extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * ep);
-+#endif /* DWC_EN_ISOC */
-+/**@}*/
-+
-+/** @name Host CIL Functions
-+ * The following functions support managing the DWC_otg controller in host
-+ * mode.
-+ */
-+/**@{*/
-+extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
-+extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if,
-+ dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status);
-+extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
-+extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if,
-+ dwc_hc_t * _hc);
-+extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if,
-+ dwc_hc_t * _hc);
-+extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
-+extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if,
-+ dwc_hc_t * _hc);
-+extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if);
-+
-+extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if,
-+ dwc_hc_t * hc);
-+
-+extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if);
-+
-+/* Macro used to clear one channel interrupt */
-+#define clear_hc_int(_hc_regs_, _intr_) \
-+do { \
-+ hcint_data_t hcint_clear = {.d32 = 0}; \
-+ hcint_clear.b._intr_ = 1; \
-+ DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \
-+} while (0)
-+
-+/*
-+ * Macro used to disable one channel interrupt. Channel interrupts are
-+ * disabled when the channel is halted or released by the interrupt handler.
-+ * There is no need to handle further interrupts of that type until the
-+ * channel is re-assigned. In fact, subsequent handling may cause crashes
-+ * because the channel structures are cleaned up when the channel is released.
-+ */
-+#define disable_hc_int(_hc_regs_, _intr_) \
-+do { \
-+ hcintmsk_data_t hcintmsk = {.d32 = 0}; \
-+ hcintmsk.b._intr_ = 1; \
-+ DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
-+} while (0)
-+
-+/**
-+ * This function Reads HPRT0 in preparation to modify. It keeps the
-+ * WC bits 0 so that if they are read as 1, they won't clear when you
-+ * write it back
-+ */
-+static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if)
-+{
-+ hprt0_data_t hprt0;
-+ hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0);
-+ hprt0.b.prtena = 0;
-+ hprt0.b.prtconndet = 0;
-+ hprt0.b.prtenchng = 0;
-+ hprt0.b.prtovrcurrchng = 0;
-+ return hprt0.d32;
-+}
-+
-+/**@}*/
-+
-+/** @name Common CIL Functions
-+ * The following functions support managing the DWC_otg controller in either
-+ * device or host mode.
-+ */
-+/**@{*/
-+
-+extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
-+ uint8_t * dest, uint16_t bytes);
-+
-+extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num);
-+extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if);
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if)
-+{
-+ return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) &
-+ DWC_READ_REG32(&core_if->core_global_regs->gintmsk));
-+}
-+
-+/**
-+ * This function returns the OTG Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if)
-+{
-+ return (DWC_READ_REG32(&core_if->core_global_regs->gotgint));
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the IN endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *
-+ core_if)
-+{
-+
-+ uint32_t v;
-+
-+ if (core_if->multiproc_int_enable) {
-+ v = DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->deachint) &
-+ DWC_READ_REG32(&core_if->
-+ dev_if->dev_global_regs->deachintmsk);
-+ } else {
-+ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ }
-+ return (v & 0xffff);
-+}
-+
-+/**
-+ * This function reads the Device All Endpoints Interrupt register and
-+ * returns the OUT endpoint interrupt bits.
-+ */
-+static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *
-+ core_if)
-+{
-+ uint32_t v;
-+
-+ if (core_if->multiproc_int_enable) {
-+ v = DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->deachint) &
-+ DWC_READ_REG32(&core_if->
-+ dev_if->dev_global_regs->deachintmsk);
-+ } else {
-+ v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
-+ }
-+
-+ return ((v & 0xffff0000) >> 16);
-+}
-+
-+/**
-+ * This function returns the Device IN EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ uint32_t v, msk, emp;
-+
-+ if (core_if->multiproc_int_enable) {
-+ msk =
-+ DWC_READ_REG32(&dev_if->
-+ dev_global_regs->diepeachintmsk[ep->num]);
-+ emp =
-+ DWC_READ_REG32(&dev_if->
-+ dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> ep->num) & 0x1) << 7;
-+ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-+ } else {
-+ msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk);
-+ emp =
-+ DWC_READ_REG32(&dev_if->
-+ dev_global_regs->dtknqr4_fifoemptymsk);
-+ msk |= ((emp >> ep->num) & 0x1) << 7;
-+ v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
-+ }
-+
-+ return v;
-+}
-+
-+/**
-+ * This function returns the Device OUT EP Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *
-+ _core_if, dwc_ep_t * _ep)
-+{
-+ dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
-+ uint32_t v;
-+ doepmsk_data_t msk = {.d32 = 0 };
-+
-+ if (_core_if->multiproc_int_enable) {
-+ msk.d32 =
-+ DWC_READ_REG32(&dev_if->
-+ dev_global_regs->doepeachintmsk[_ep->num]);
-+ if (_core_if->pti_enh_enable) {
-+ msk.b.pktdrpsts = 1;
-+ }
-+ v = DWC_READ_REG32(&dev_if->
-+ out_ep_regs[_ep->num]->doepint) & msk.d32;
-+ } else {
-+ msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk);
-+ if (_core_if->pti_enh_enable) {
-+ msk.b.pktdrpsts = 1;
-+ }
-+ v = DWC_READ_REG32(&dev_if->
-+ out_ep_regs[_ep->num]->doepint) & msk.d32;
-+ }
-+ return v;
-+}
-+
-+/**
-+ * This function returns the Host All Channel Interrupt register
-+ */
-+static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t *
-+ _core_if)
-+{
-+ return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint));
-+}
-+
-+static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t *
-+ _core_if, dwc_hc_t * _hc)
-+{
-+ return (DWC_READ_REG32
-+ (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
-+}
-+
-+/**
-+ * This function returns the mode of the operation, host or device.
-+ *
-+ * @return 0 - Device Mode, 1 - Host Mode
-+ */
-+static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if)
-+{
-+ return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1);
-+}
-+
-+/**@}*/
-+
-+/**
-+ * DWC_otg CIL callback structure. This structure allows the HCD and
-+ * PCD to register functions used for starting and stopping the PCD
-+ * and HCD for role change on for a DRD.
-+ */
-+typedef struct dwc_otg_cil_callbacks {
-+ /** Start function for role change */
-+ int (*start) (void *_p);
-+ /** Stop Function for role change */
-+ int (*stop) (void *_p);
-+ /** Disconnect Function for role change */
-+ int (*disconnect) (void *_p);
-+ /** Resume/Remote wakeup Function */
-+ int (*resume_wakeup) (void *_p);
-+ /** Suspend function */
-+ int (*suspend) (void *_p);
-+ /** Session Start (SRP) */
-+ int (*session_start) (void *_p);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ /** Sleep (switch to L0 state) */
-+ int (*sleep) (void *_p);
-+#endif
-+ /** Pointer passed to start() and stop() */
-+ void *p;
-+} dwc_otg_cil_callbacks_t;
-+
-+extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if,
-+ dwc_otg_cil_callbacks_t * _cb,
-+ void *_p);
-+extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if,
-+ dwc_otg_cil_callbacks_t * _cb,
-+ void *_p);
-+
-+void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if);
-+
-+//////////////////////////////////////////////////////////////////////
-+/** Start the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_hcd_start(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->start) {
-+ core_if->hcd_cb->start(core_if->hcd_cb->p);
-+ }
-+}
-+
-+/** Stop the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->stop) {
-+ core_if->hcd_cb->stop(core_if->hcd_cb->p);
-+ }
-+}
-+
-+/** Disconnect the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
-+ core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
-+ }
-+}
-+
-+/** Inform the HCD the a New Session has begun. Helper function for
-+ * using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
-+ core_if->hcd_cb->session_start(core_if->hcd_cb->p);
-+ }
-+}
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+/**
-+ * Inform the HCD about LPM sleep.
-+ * Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->sleep) {
-+ core_if->hcd_cb->sleep(core_if->hcd_cb->p);
-+ }
-+}
-+#endif
-+
-+/** Resume the HCD. Helper function for using the HCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) {
-+ core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p);
-+ }
-+}
-+
-+/** Start the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_pcd_start(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->start) {
-+ core_if->pcd_cb->start(core_if->pcd_cb->p);
-+ }
-+}
-+
-+/** Stop the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->stop) {
-+ core_if->pcd_cb->stop(core_if->pcd_cb->p);
-+ }
-+}
-+
-+/** Suspend the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
-+ core_if->pcd_cb->suspend(core_if->pcd_cb->p);
-+ }
-+}
-+
-+/** Resume the PCD. Helper function for using the PCD callbacks.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if)
-+{
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+}
-+
-+//////////////////////////////////////////////////////////////////////
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
-@@ -0,0 +1,1594 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
-+ * $Revision: #32 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ *
-+ * The Core Interface Layer provides basic services for accessing and
-+ * managing the DWC_otg hardware. These services are used by both the
-+ * Host Controller Driver and the Peripheral Controller Driver.
-+ *
-+ * This file contains the Common Interrupt handlers.
-+ */
-+#include "dwc_os.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_hcd.h"
-+
-+#ifdef DEBUG
-+inline const char *op_state_str(dwc_otg_core_if_t * core_if)
-+{
-+ return (core_if->op_state == A_HOST ? "a_host" :
-+ (core_if->op_state == A_SUSPEND ? "a_suspend" :
-+ (core_if->op_state == A_PERIPHERAL ? "a_peripheral" :
-+ (core_if->op_state == B_PERIPHERAL ? "b_peripheral" :
-+ (core_if->op_state == B_HOST ? "b_host" : "unknown")))));
-+}
-+#endif
-+
-+/** This function will log a debug message
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gintsts_data_t gintsts;
-+ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
-+ dwc_otg_mode(core_if) ? "Host" : "Device");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.modemismatch = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This function handles the OTG Interrupts. It reads the OTG
-+ * Interrupt Register (GOTGINT) to determine what interrupt has
-+ * occurred.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gotgint_data_t gotgint;
-+ gotgctl_data_t gotgctl;
-+ gintmsk_data_t gintmsk;
-+ gpwrdn_data_t gpwrdn;
-+
-+ gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint);
-+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
-+ op_state_str(core_if));
-+
-+ if (gotgint.b.sesenddet) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Session End Detected++ (%s)\n",
-+ op_state_str(core_if));
-+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
-+
-+ if (core_if->op_state == B_HOST) {
-+ cil_pcd_start(core_if);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ /* If not B_HOST and Device HNP still set. HNP
-+ * Did not succeed!*/
-+ if (gotgctl.b.devhnpen) {
-+ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
-+ __DWC_ERROR("Device Not Connected/Responding!\n");
-+ }
-+
-+ /* If Session End Detected the B-Cable has
-+ * been disconnected. */
-+ /* Reset PCD and Gadget driver to a
-+ * clean state. */
-+ core_if->lx_state = DWC_OTG_L0;
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_pcd_stop(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+
-+ if (core_if->adp_enable) {
-+ if (core_if->power_down == 2) {
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->
-+ gpwrdn, gpwrdn.d32, 0);
-+ }
-+
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+
-+ dwc_otg_adp_sense_start(core_if);
-+ }
-+ }
-+
-+ gotgctl.d32 = 0;
-+ gotgctl.b.devhnpen = 1;
-+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
-+ }
-+ if (gotgint.b.sesreqsucstschng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Session Reqeust Success Status Change++\n");
-+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
-+ if (gotgctl.b.sesreqscs) {
-+
-+ if ((core_if->core_params->phy_type ==
-+ DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) {
-+ core_if->srp_success = 1;
-+ } else {
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_pcd_resume(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ DWC_MODIFY_REG32(&global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+ }
-+ }
-+ }
-+ if (gotgint.b.hstnegsucstschng) {
-+ /* Print statements during the HNP interrupt handling
-+ * can cause it to fail.*/
-+ gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
-+ /* WA for 3.00a- HW is not setting cur_mode, even sometimes
-+ * this does not help*/
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a)
-+ dwc_udelay(100);
-+ if (gotgctl.b.hstnegscs) {
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ core_if->op_state = B_HOST;
-+ /*
-+ * Need to disable SOF interrupt immediately.
-+ * When switching from device to host, the PCD
-+ * interrupt handler won't handle the
-+ * interrupt if host mode is already set. The
-+ * HCD interrupt handler won't get called if
-+ * the HCD state is HALT. This means that the
-+ * interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ DWC_MODIFY_REG32(&global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+ /* Call callback function with spin lock released */
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_pcd_stop(core_if);
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ cil_hcd_start(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ core_if->op_state = B_HOST;
-+ }
-+ } else {
-+ gotgctl.d32 = 0;
-+ gotgctl.b.hnpreq = 1;
-+ gotgctl.b.devhnpen = 1;
-+ DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
-+ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
-+ __DWC_ERROR("Device Not Connected/Responding\n");
-+ }
-+ }
-+ if (gotgint.b.hstnegdet) {
-+ /* The disconnect interrupt is set at the same time as
-+ * Host Negotiation Detected. During the mode
-+ * switch all interrupts are cleared so the disconnect
-+ * interrupt handler will not get executed.
-+ */
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "Host Negotiation Detected++ (%s)\n",
-+ (dwc_otg_is_host_mode(core_if) ? "Host" :
-+ "Device"));
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",
-+ core_if->op_state);
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_hcd_disconnect(core_if);
-+ cil_pcd_start(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ core_if->op_state = A_PERIPHERAL;
-+ } else {
-+ /*
-+ * Need to disable SOF interrupt immediately. When
-+ * switching from device to host, the PCD interrupt
-+ * handler won't handle the interrupt if host mode is
-+ * already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that
-+ * the interrupt does not get handled and Linux
-+ * complains loudly.
-+ */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.sofintr = 1;
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0);
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_pcd_stop(core_if);
-+ cil_hcd_start(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ core_if->op_state = A_HOST;
-+ }
-+ }
-+ if (gotgint.b.adevtoutchng) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
-+ "A-Device Timeout Change++\n");
-+ }
-+ if (gotgint.b.debdone) {
-+ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n");
-+ }
-+
-+ /* Clear GOTGINT */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32);
-+
-+ return 1;
-+}
-+
-+void w_conn_id_status_change(void *p)
-+{
-+ dwc_otg_core_if_t *core_if = p;
-+ uint32_t count = 0;
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+
-+ gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
-+ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
-+
-+ /* B-Device connector (Device Mode) */
-+ if (gotgctl.b.conidsts) {
-+ /* Wait for switch to device mode. */
-+ while (!dwc_otg_is_device_mode(core_if)) {
-+ DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(core_if) ? "Host" :
-+ "Peripheral"));
-+ dwc_mdelay(100);
-+ if (++count > 10000)
-+ break;
-+ }
-+ DWC_ASSERT(++count < 10000,
-+ "Connection id status change timed out");
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ } else {
-+ /* A-Device connector (Host Mode) */
-+ while (!dwc_otg_is_host_mode(core_if)) {
-+ DWC_PRINTF("Waiting for Host Mode, Mode=%s\n",
-+ (dwc_otg_is_host_mode(core_if) ? "Host" :
-+ "Peripheral"));
-+ dwc_mdelay(100);
-+ if (++count > 10000)
-+ break;
-+ }
-+ DWC_ASSERT(++count < 10000,
-+ "Connection id status change timed out");
-+ core_if->op_state = A_HOST;
-+ /*
-+ * Initialize the Core for Host mode.
-+ */
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+ }
-+}
-+
-+/**
-+ * This function handles the Connector ID Status Change Interrupt. It
-+ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
-+ * is a Device to Host Mode transition or a Host Mode to Device
-+ * Transition.
-+ *
-+ * This only occurs when the cable is connected/removed from the PHY
-+ * connector.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if)
-+{
-+
-+ /*
-+ * Need to disable SOF interrupt immediately. If switching from device
-+ * to host, the PCD interrupt handler won't handle the interrupt if
-+ * host mode is already set. The HCD interrupt handler won't get
-+ * called if the HCD state is HALT. This means that the interrupt does
-+ * not get handled and Linux complains loudly.
-+ */
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+ gintsts_data_t gintsts = {.d32 = 0 };
-+
-+ gintmsk.b.sofintr = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+
-+ DWC_DEBUGPL(DBG_CIL,
-+ " ++Connector ID Status Change Interrupt++ (%s)\n",
-+ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"));
-+
-+ DWC_SPINUNLOCK(core_if->lock);
-+
-+ /*
-+ * Need to schedule a work, as there are possible DELAY function calls
-+ * Release lock before scheduling workq as it holds spinlock during scheduling
-+ */
-+
-+ DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change,
-+ core_if, "connection id status change");
-+ DWC_SPINLOCK(core_if->lock);
-+
-+ /* Set flag and clear interrupt */
-+ gintsts.b.conidstschng = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device is initiating the Session
-+ * Request Protocol to request the host to turn on bus power so a new
-+ * session can begin. The handler responds by turning on bus power. If
-+ * the DWC_otg controller is in low power mode, the handler brings the
-+ * controller out of low power mode before turning on bus power.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+#ifndef DWC_HOST_ONLY
-+ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ DWC_PRINTF("SRP: Device mode\n");
-+ } else {
-+ hprt0_data_t hprt0;
-+ DWC_PRINTF("SRP: Host mode\n");
-+
-+ /* Turn on the port power bit. */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Start the Connection timer. So a message can be displayed
-+ * if connect does not occur within 10 seconds. */
-+ cil_hcd_session_start(core_if);
-+ }
-+#endif
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sessreqintr = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+void w_wakeup_detected(void *p)
-+{
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p;
-+ /*
-+ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
-+ * so that OPT tests pass with all PHYs).
-+ */
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+#if 0
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ dwc_udelay(10);
-+#endif //0
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32);
-+// dwc_mdelay(70);
-+ hprt0.b.prtres = 0; /* Resume */
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n",
-+ DWC_READ_REG32(core_if->host_if->hprt0));
-+
-+ cil_hcd_resume(core_if);
-+
-+ /** Change to L0 state*/
-+ core_if->lx_state = DWC_OTG_L0;
-+}
-+
-+/**
-+ * This interrupt indicates that the DWC_otg controller has detected a
-+ * resume or remote wakeup sequence. If the DWC_otg controller is in
-+ * low power mode, the handler must brings the controller out of low
-+ * power mode. The controller automatically begins resume
-+ * signaling. The handler schedules a time to stop resume signaling.
-+ */
-+int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY,
-+ "++Resume and Remote Wakeup Detected Interrupt++\n");
-+
-+ DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state);
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dctl_data_t dctl = {.d32 = 0 };
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
-+ dsts));
-+ if (core_if->lx_state == DWC_OTG_L2) {
-+#ifdef PARTIAL_POWER_DOWN
-+ if (core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32 = 0 };
-+
-+ power.d32 = DWC_READ_REG32(core_if->pcgcctl);
-+ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n",
-+ power.d32);
-+
-+ power.b.stoppclk = 0;
-+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
-+
-+ power.b.pwrclmp = 0;
-+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 0;
-+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
-+ }
-+#endif
-+ /* Clear the Remote Wakeup Signaling */
-+ dctl.b.rmtwkupsig = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ dctl, dctl.d32, 0);
-+
-+ DWC_SPINUNLOCK(core_if->lock);
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+ DWC_SPINLOCK(core_if->lock);
-+ } else {
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ lpmcfg.b.hird_thres &= (~(1 << 4));
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
-+ lpmcfg.d32);
-+ }
-+ /** Change to L0 state*/
-+ core_if->lx_state = DWC_OTG_L0;
-+ } else {
-+ if (core_if->lx_state != DWC_OTG_L1) {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+
-+ /* Restart the Phy Clock */
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71);
-+ } else {
-+ /** Change to L0 state*/
-+ core_if->lx_state = DWC_OTG_L0;
-+ }
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.wkupintr = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that the Wakeup Logic has detected a
-+ * Device disconnect.
-+ */
-+static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if)
-+{
-+ gpwrdn_data_t gpwrdn = { .d32 = 0 };
-+ gpwrdn_data_t gpwrdn_temp = { .d32 = 0 };
-+ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+
-+ DWC_PRINTF("%s called\n", __FUNCTION__);
-+
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ }
-+
-+ /* Switch on the voltage to the core */
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset the core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps*/
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Remove reset the core signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ core_if->hibernation_suspend = 0;
-+
-+ /* Disable PMU */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ if (gpwrdn_temp.b.idsts) {
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ } else {
-+ core_if->op_state = A_HOST;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that the Wakeup Logic has detected a
-+ * remote wakeup sequence.
-+ */
-+static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ DWC_DEBUGPL(DBG_ANY,
-+ "++Powerdown Remote Wakeup Detected Interrupt++\n");
-+
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ }
-+
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ if (gpwrdn.b.idsts) { // Device Mode
-+ if ((core_if->power_down == 2)
-+ && (core_if->hibernation_suspend == 1)) {
-+ dwc_otg_device_hibernation_restore(core_if, 0, 0);
-+ }
-+ } else {
-+ if ((core_if->power_down == 2)
-+ && (core_if->hibernation_suspend == 1)) {
-+ dwc_otg_host_hibernation_restore(core_if, 1, 0);
-+ }
-+ }
-+ return 1;
-+}
-+
-+static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
-+ dwc_otg_core_if_t *core_if = otg_dev->core_if;
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
-+ gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ if (core_if->power_down == 2) {
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n");
-+ /* Switch on the voltage to the core */
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset the core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Remove reset the core signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /*Indicates that we are exiting from hibernation */
-+ core_if->hibernation_suspend = 0;
-+
-+ /* Disable PMU */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ gpwrdn.d32 = core_if->gr_backup->gpwrdn_local;
-+ if (gpwrdn.b.dis_vbus == 1) {
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.dis_vbus = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ }
-+
-+ if (gpwrdn_temp.b.idsts) {
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ } else {
-+ core_if->op_state = A_HOST;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+ }
-+ }
-+
-+ if (core_if->adp_enable) {
-+ uint8_t is_host = 0;
-+ DWC_SPINUNLOCK(core_if->lock);
-+ /* Change the core_if's lock to hcd/pcd lock depend on mode? */
-+#ifndef DWC_HOST_ONLY
-+ if (gpwrdn_temp.b.idsts)
-+ core_if->lock = otg_dev->pcd->lock;
-+#endif
-+#ifndef DWC_DEVICE_ONLY
-+ if (!gpwrdn_temp.b.idsts) {
-+ core_if->lock = otg_dev->hcd->lock;
-+ is_host = 1;
-+ }
-+#endif
-+ DWC_PRINTF("RESTART ADP\n");
-+ if (core_if->adp.probe_enabled)
-+ dwc_otg_adp_probe_stop(core_if);
-+ if (core_if->adp.sense_enabled)
-+ dwc_otg_adp_sense_stop(core_if);
-+ if (core_if->adp.sense_timer_started)
-+ DWC_TIMER_CANCEL(core_if->adp.sense_timer);
-+ if (core_if->adp.vbuson_timer_started)
-+ DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
-+ core_if->adp.probe_timer_values[0] = -1;
-+ core_if->adp.probe_timer_values[1] = -1;
-+ core_if->adp.sense_timer_started = 0;
-+ core_if->adp.vbuson_timer_started = 0;
-+ core_if->adp.probe_counter = 0;
-+ core_if->adp.gpwrdn = 0;
-+
-+ /* Disable PMU and restart ADP */
-+ gpwrdn_temp.d32 = 0;
-+ gpwrdn_temp.b.pmuactv = 1;
-+ gpwrdn_temp.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ DWC_PRINTF("Check point 1\n");
-+ dwc_mdelay(110);
-+ dwc_otg_adp_start(core_if, is_host);
-+ DWC_SPINLOCK(core_if->lock);
-+ }
-+
-+
-+ return 1;
-+}
-+
-+static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ int32_t otg_cap_param = core_if->core_params->otg_cap;
-+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
-+
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ if (core_if->power_down == 2) {
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ }
-+
-+ if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
-+ otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) &&
-+ gpwrdn.b.bsessvld == 0) {
-+ /* Save gpwrdn register for further usage if stschng interrupt */
-+ core_if->gr_backup->gpwrdn_local =
-+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ /*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */
-+ return 1;
-+ }
-+
-+ /* Switch on the voltage to the core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset the core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Remove reset the core signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /*Indicates that we are exiting from hibernation */
-+ core_if->hibernation_suspend = 0;
-+
-+ /* Disable PMU */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
-+ otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) {
-+ /*
-+ * Initiate SRP after initial ADP probe.
-+ */
-+ dwc_otg_initiate_srp(core_if);
-+ }
-+ }
-+
-+ return 1;
-+}
-+/**
-+ * This interrupt indicates that the Wakeup Logic has detected a
-+ * status change either on IDDIG or BSessVld.
-+ */
-+static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev)
-+{
-+ int retval;
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
-+ dwc_otg_core_if_t *core_if = otg_dev->core_if;
-+
-+ DWC_PRINTF("%s called\n", __FUNCTION__);
-+
-+ if (core_if->power_down == 2) {
-+ if (core_if->hibernation_suspend <= 0) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ } else
-+ gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local;
-+
-+ } else {
-+ gpwrdn_temp.d32 = core_if->adp.gpwrdn;
-+ }
-+
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+
-+ if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) {
-+ retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev);
-+ } else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) {
-+ retval = dwc_otg_handle_pwrdn_session_change(core_if);
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This interrupt indicates that the Wakeup Logic has detected a
-+ * SRP.
-+ */
-+static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+
-+ DWC_PRINTF("%s called\n", __FUNCTION__);
-+
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return 1;
-+ }
-+#ifdef DWC_DEV_SRPCAP
-+ if (core_if->pwron_timer_started) {
-+ core_if->pwron_timer_started = 0;
-+ DWC_TIMER_CANCEL(core_if->pwron_timer);
-+ }
-+#endif
-+
-+ /* Switch on the voltage to the core */
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset the core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Remove reset the core signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Indicates that we are exiting from hibernation */
-+ core_if->hibernation_suspend = 0;
-+
-+ /* Disable PMU */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Programm Disable VBUS to 0 */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.dis_vbus = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /*Initialize the core as Host */
-+ core_if->op_state = A_HOST;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+
-+ return 1;
-+}
-+
-+/** This interrupt indicates that restore command after Hibernation
-+ * was completed by the core. */
-+int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if)
-+{
-+ pcgcctl_data_t pcgcctl;
-+ DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n");
-+
-+ //TODO De-assert restore signal. 8.a
-+ pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl);
-+ if (pcgcctl.b.restoremode == 1) {
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+ /*
-+ * If restore mode is Remote Wakeup,
-+ * unmask Remote Wakeup interrupt.
-+ */
-+ gintmsk.b.wkupintr = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
-+ 0, gintmsk.d32);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that a device has been disconnected from
-+ * the root port.
-+ */
-+int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
-+ (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"),
-+ op_state_str(core_if));
-+
-+/** @todo Consolidate this if statement. */
-+#ifndef DWC_HOST_ONLY
-+ if (core_if->op_state == B_HOST) {
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_hcd_disconnect(core_if);
-+ cil_pcd_start(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else if (dwc_otg_is_device_mode(core_if)) {
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+ gotgctl.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
-+ if (gotgctl.b.hstsethnpen == 1) {
-+ /* Do nothing, if HNP in process the OTG
-+ * interrupt "Host Negotiation Detected"
-+ * interrupt will do the mode switch.
-+ */
-+ } else if (gotgctl.b.devhnpen == 0) {
-+ /* If in device mode Disconnect and stop the HCD, then
-+ * start the PCD. */
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_hcd_disconnect(core_if);
-+ cil_pcd_start(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ core_if->op_state = B_PERIPHERAL;
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n");
-+ }
-+ } else {
-+ if (core_if->op_state == A_HOST) {
-+ /* A-Cable still connected but device disconnected. */
-+ cil_hcd_disconnect(core_if);
-+ if (core_if->adp_enable) {
-+ gpwrdn_data_t gpwrdn = { .d32 = 0 };
-+ cil_hcd_stop(core_if);
-+ /* Enable Power Down Logic */
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_otg_adp_probe_start(core_if);
-+
-+ /* Power off the core */
-+ if (core_if->power_down == 2) {
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32
-+ (&core_if->core_global_regs->gpwrdn,
-+ gpwrdn.d32, 0);
-+ }
-+ }
-+ }
-+ }
-+#endif
-+ /* Change to L3(OFF) state */
-+ core_if->lx_state = DWC_OTG_L3;
-+
-+ gintsts.d32 = 0;
-+ gintsts.b.disconnect = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that SUSPEND state has been detected on
-+ * the USB.
-+ *
-+ * For HNP the USB Suspend interrupt signals the change from
-+ * "a_peripheral" to "a_host".
-+ *
-+ * When power management is enabled the core will be put in low power
-+ * mode.
-+ */
-+int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if)
-+{
-+ dsts_data_t dsts;
-+ gintsts_data_t gintsts;
-+ dcfg_data_t dcfg;
-+
-+ DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n");
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ /* Check the Device status register to determine if the Suspend
-+ * state is active. */
-+ dsts.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
-+ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
-+ "HWCFG4.power Optimize=%d\n",
-+ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
-+
-+#ifdef PARTIAL_POWER_DOWN
-+/** @todo Add a module parameter for power management. */
-+
-+ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
-+ pcgcctl_data_t power = {.d32 = 0 };
-+ DWC_DEBUGPL(DBG_CIL, "suspend\n");
-+
-+ power.b.pwrclmp = 1;
-+ DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
-+
-+ power.b.rstpdwnmodule = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
-+
-+ power.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
-+
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "disconnect?\n");
-+ }
-+#endif
-+ /* PCD callback for suspend. Release the lock inside of callback function */
-+ cil_pcd_suspend(core_if);
-+ if (core_if->power_down == 2)
-+ {
-+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state);
-+ DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr);
-+
-+ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ gusbcfg_data_t gusbcfg = {.d32 = 0 };
-+
-+ /* Change to L2(suspend) state */
-+ core_if->lx_state = DWC_OTG_L2;
-+
-+ /* Clear interrupt in gintsts */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->
-+ gintsts, gintsts.d32);
-+ DWC_PRINTF("Start of hibernation completed\n");
-+ dwc_otg_save_global_regs(core_if);
-+ dwc_otg_save_dev_regs(core_if);
-+
-+ gusbcfg.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->
-+ gusbcfg);
-+ if (gusbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ /* Suspend the Phy Clock */
-+ pcgcctl.d32 = 0;
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0,
-+ pcgcctl.d32);
-+ dwc_udelay(10);
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ } else {
-+ /* UTMI+ Interface */
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0,
-+ pcgcctl.d32);
-+ dwc_udelay(10);
-+ }
-+
-+ /* Set flag to indicate that we are in hibernation */
-+ core_if->hibernation_suspend = 1;
-+ /* Enable interrupts from wake up logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Unmask device mode interrupts in GPWRDN */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.rst_det_msk = 1;
-+ gpwrdn.b.lnstchng_msk = 1;
-+ gpwrdn.b.sts_chngint_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Enable Power Down Clamp */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Switch off VDD */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+
-+ /* Save gpwrdn register for further usage if stschng interrupt */
-+ core_if->gr_backup->gpwrdn_local =
-+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ DWC_PRINTF("Hibernation completed\n");
-+
-+ return 1;
-+ }
-+ } else if (core_if->power_down == 3) {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
-+ DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state);
-+ DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr);
-+
-+ if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
-+ DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n");
-+ core_if->xhib = 1;
-+
-+ /* Clear interrupt in gintsts */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->
-+ gintsts, gintsts.d32);
-+
-+ dwc_otg_save_global_regs(core_if);
-+ dwc_otg_save_dev_regs(core_if);
-+
-+ /* Wait for 10 PHY clocks */
-+ dwc_udelay(10);
-+
-+ /* Program GPIO register while entering to xHib */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1);
-+
-+ pcgcctl.b.enbl_extnd_hiber = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
-+
-+ pcgcctl.d32 = 0;
-+ pcgcctl.b.extnd_hiber_pwrclmp = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
-+
-+ pcgcctl.d32 = 0;
-+ pcgcctl.b.extnd_hiber_switch = 1;
-+ core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
-+
-+ DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n");
-+
-+ return 1;
-+ }
-+ }
-+ } else {
-+ if (core_if->op_state == A_PERIPHERAL) {
-+ DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n");
-+ /* Clear the a_peripheral flag, back to a_host. */
-+ DWC_SPINUNLOCK(core_if->lock);
-+ cil_pcd_stop(core_if);
-+ cil_hcd_start(core_if);
-+ DWC_SPINLOCK(core_if->lock);
-+ core_if->op_state = A_HOST;
-+ }
-+ }
-+
-+ /* Change to L2(suspend) state */
-+ core_if->lx_state = DWC_OTG_L2;
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbsuspend = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ gahbcfg_data_t gahbcfg = {.d32 = 0 };
-+
-+ dwc_udelay(10);
-+
-+ /* Program GPIO register while entering to xHib */
-+ DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0);
-+
-+ pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl;
-+ pcgcctl.b.extnd_hiber_pwrclmp = 0;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+ dwc_udelay(10);
-+
-+ gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn;
-+ gpwrdn.b.restore = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ restore_lpm_i2c_regs(core_if);
-+
-+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
-+ pcgcctl.b.max_xcvrselect = 1;
-+ pcgcctl.b.ess_reg_restored = 0;
-+ pcgcctl.b.extnd_hiber_switch = 0;
-+ pcgcctl.b.extnd_hiber_pwrclmp = 0;
-+ pcgcctl.b.enbl_extnd_hiber = 1;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+
-+ gahbcfg.d32 = core_if->gr_backup->gahbcfg_local;
-+ gahbcfg.b.glblintrmsk = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16);
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
-+ core_if->gr_backup->gusbcfg_local);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
-+ core_if->dr_backup->dcfg);
-+
-+ pcgcctl.d32 = 0;
-+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
-+ pcgcctl.b.max_xcvrselect = 1;
-+ pcgcctl.d32 |= 0x608;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+ dwc_udelay(10);
-+
-+ pcgcctl.d32 = 0;
-+ pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
-+ pcgcctl.b.max_xcvrselect = 1;
-+ pcgcctl.b.ess_reg_restored = 1;
-+ pcgcctl.b.enbl_extnd_hiber = 1;
-+ pcgcctl.b.rstpdwnmodule = 1;
-+ pcgcctl.b.restoremode = 1;
-+ DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
-+
-+ return 1;
-+}
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+/**
-+ * This function hadles LPM transaction received interrupt.
-+ */
-+static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ gintsts_data_t gintsts;
-+
-+ if (!core_if->core_params->lpm_enable) {
-+ DWC_PRINTF("Unexpected LPM interrupt\n");
-+ }
-+
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32);
-+
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ cil_hcd_sleep(core_if);
-+ } else {
-+ lpmcfg.b.hird_thres |= (1 << 4);
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
-+ lpmcfg.d32);
-+ }
-+
-+ /* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */
-+ dwc_udelay(10);
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ if (lpmcfg.b.prt_sleep_sts) {
-+ /* Save the current state */
-+ core_if->lx_state = DWC_OTG_L1;
-+ }
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.lpmtranrcvd = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+ return 1;
-+}
-+#endif /* CONFIG_USB_DWC_OTG_LPM */
-+
-+/**
-+ * This function returns the Core Interrupt register.
-+ */
-+static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if, gintmsk_data_t *reenable_gintmsk, dwc_otg_hcd_t *hcd)
-+{
-+ gahbcfg_data_t gahbcfg = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk;
-+ gintmsk_data_t gintmsk_common = {.d32 = 0 };
-+ gintmsk_common.b.wkupintr = 1;
-+ gintmsk_common.b.sessreqintr = 1;
-+ gintmsk_common.b.conidstschng = 1;
-+ gintmsk_common.b.otgintr = 1;
-+ gintmsk_common.b.modemismatch = 1;
-+ gintmsk_common.b.disconnect = 1;
-+ gintmsk_common.b.usbsuspend = 1;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ gintmsk_common.b.lpmtranrcvd = 1;
-+#endif
-+ gintmsk_common.b.restoredone = 1;
-+ if(dwc_otg_is_device_mode(core_if))
-+ {
-+ /** @todo: The port interrupt occurs while in device
-+ * mode. Added code to CIL to clear the interrupt for now!
-+ */
-+ gintmsk_common.b.portintr = 1;
-+ }
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-+ if(fiq_enable) {
-+ local_fiq_disable();
-+ /* Pull in the interrupts that the FIQ has masked */
-+ gintmsk.d32 |= ~(hcd->fiq_state->gintmsk_saved.d32);
-+ gintmsk.d32 |= gintmsk_common.d32;
-+ /* for the upstairs function to reenable - have to read it here in case FIQ triggers again */
-+ reenable_gintmsk->d32 = gintmsk.d32;
-+ local_fiq_enable();
-+ }
-+
-+ gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
-+
-+#ifdef DEBUG
-+ /* if any common interrupts set */
-+ if (gintsts.d32 & gintmsk_common.d32) {
-+ DWC_DEBUGPL(DBG_ANY, "common_intr: gintsts=%08x gintmsk=%08x\n",
-+ gintsts.d32, gintmsk.d32);
-+ }
-+#endif
-+ if (!fiq_enable){
-+ if (gahbcfg.b.glblintrmsk)
-+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
-+ else
-+ return 0;
-+ } else {
-+ /* Our IRQ kicker is no longer the USB hardware, it's the MPHI interface.
-+ * Can't trust the global interrupt mask bit in this case.
-+ */
-+ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
-+ }
-+
-+}
-+
-+/* MACRO for clearing interupt bits in GPWRDN register */
-+#define CLEAR_GPWRDN_INTR(__core_if,__intr) \
-+do { \
-+ gpwrdn_data_t gpwrdn = {.d32=0}; \
-+ gpwrdn.b.__intr = 1; \
-+ DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \
-+ 0, gpwrdn.d32); \
-+} while (0)
-+
-+/**
-+ * Common interrupt handler.
-+ *
-+ * The common interrupts are those that occur in both Host and Device mode.
-+ * This handler handles the following interrupts:
-+ * - Mode Mismatch Interrupt
-+ * - Disconnect Interrupt
-+ * - OTG Interrupt
-+ * - Connector ID Status Change Interrupt
-+ * - Session Request Interrupt.
-+ * - Resume / Remote Wakeup Detected Interrupt.
-+ * - LPM Transaction Received Interrupt
-+ * - ADP Transaction Received Interrupt
-+ *
-+ */
-+int32_t dwc_otg_handle_common_intr(void *dev)
-+{
-+ int retval = 0;
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk_reenable = { .d32 = 0 };
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ dwc_otg_device_t *otg_dev = dev;
-+ dwc_otg_core_if_t *core_if = otg_dev->core_if;
-+ gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+ if (dwc_otg_is_device_mode(core_if))
-+ core_if->frame_num = dwc_otg_get_frame_number(core_if);
-+
-+ if (core_if->lock)
-+ DWC_SPINLOCK(core_if->lock);
-+
-+ if (core_if->power_down == 3 && core_if->xhib == 1) {
-+ DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n");
-+ retval |= dwc_otg_handle_xhib_exit_intr(core_if);
-+ core_if->xhib = 2;
-+ if (core_if->lock)
-+ DWC_SPINUNLOCK(core_if->lock);
-+
-+ return retval;
-+ }
-+
-+ if (core_if->hibernation_suspend <= 0) {
-+ /* read_common will have to poke the FIQ's saved mask. We must then clear this mask at the end
-+ * of this handler - god only knows why it's done like this
-+ */
-+ gintsts.d32 = dwc_otg_read_common_intr(core_if, &gintmsk_reenable, otg_dev->hcd);
-+
-+ if (gintsts.b.modemismatch) {
-+ retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
-+ }
-+ if (gintsts.b.otgintr) {
-+ retval |= dwc_otg_handle_otg_intr(core_if);
-+ }
-+ if (gintsts.b.conidstschng) {
-+ retval |=
-+ dwc_otg_handle_conn_id_status_change_intr(core_if);
-+ }
-+ if (gintsts.b.disconnect) {
-+ retval |= dwc_otg_handle_disconnect_intr(core_if);
-+ }
-+ if (gintsts.b.sessreqintr) {
-+ retval |= dwc_otg_handle_session_req_intr(core_if);
-+ }
-+ if (gintsts.b.wkupintr) {
-+ retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
-+ }
-+ if (gintsts.b.usbsuspend) {
-+ retval |= dwc_otg_handle_usb_suspend_intr(core_if);
-+ }
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ if (gintsts.b.lpmtranrcvd) {
-+ retval |= dwc_otg_handle_lpm_intr(core_if);
-+ }
-+#endif
-+ if (gintsts.b.restoredone) {
-+ gintsts.d32 = 0;
-+ if (core_if->power_down == 2)
-+ core_if->hibernation_suspend = -1;
-+ else if (core_if->power_down == 3 && core_if->xhib == 2) {
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ dctl_data_t dctl = {.d32 = 0 };
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->
-+ gintsts, 0xFFFFFFFF);
-+
-+ DWC_DEBUGPL(DBG_ANY,
-+ "RESTORE DONE generated\n");
-+
-+ gpwrdn.b.restore = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ pcgcctl.b.rstpdwnmodule = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg);
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl);
-+ dwc_udelay(50);
-+
-+ dctl.b.pwronprgdone = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ dwc_udelay(10);
-+
-+ dwc_otg_restore_global_regs(core_if);
-+ dwc_otg_restore_dev_regs(core_if, 0);
-+
-+ dctl.d32 = 0;
-+ dctl.b.pwronprgdone = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
-+ dwc_udelay(10);
-+
-+ pcgcctl.d32 = 0;
-+ pcgcctl.b.enbl_extnd_hiber = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+
-+ /* The core will be in ON STATE */
-+ core_if->lx_state = DWC_OTG_L0;
-+ core_if->xhib = 0;
-+
-+ DWC_SPINUNLOCK(core_if->lock);
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+ DWC_SPINLOCK(core_if->lock);
-+
-+ }
-+
-+ gintsts.b.restoredone = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
-+ DWC_PRINTF(" --Restore done interrupt received-- \n");
-+ retval |= 1;
-+ }
-+ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
-+ /* The port interrupt occurs while in device mode with HPRT0
-+ * Port Enable/Disable.
-+ */
-+ gintsts.d32 = 0;
-+ gintsts.b.portintr = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
-+ retval |= 1;
-+ gintmsk_reenable.b.portintr = 1;
-+
-+ }
-+ /* Did we actually handle anything? if so, unmask the interrupt */
-+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "CILOUT %1d", retval);
-+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintsts.d32);
-+// fiq_print(FIQDBG_INT, otg_dev->hcd->fiq_state, "%08x", gintmsk_reenable.d32);
-+ if (retval && fiq_enable) {
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_reenable.d32);
-+ }
-+
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32);
-+
-+ if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) {
-+ CLEAR_GPWRDN_INTR(core_if, disconn_det);
-+ if (gpwrdn.b.linestate == 0) {
-+ dwc_otg_handle_pwrdn_disconnect_intr(core_if);
-+ } else {
-+ DWC_PRINTF("Disconnect detected while linestate is not 0\n");
-+ }
-+
-+ retval |= 1;
-+ }
-+ if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) {
-+ CLEAR_GPWRDN_INTR(core_if, lnstschng);
-+ /* remote wakeup from hibernation */
-+ if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) {
-+ dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if);
-+ } else {
-+ DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate);
-+ }
-+ retval |= 1;
-+ }
-+ if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) {
-+ CLEAR_GPWRDN_INTR(core_if, rst_det);
-+ if (gpwrdn.b.linestate == 0) {
-+ DWC_PRINTF("Reset detected\n");
-+ retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1);
-+ }
-+ }
-+ if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) {
-+ CLEAR_GPWRDN_INTR(core_if, srp_det);
-+ dwc_otg_handle_pwrdn_srp_intr(core_if);
-+ retval |= 1;
-+ }
-+ }
-+ /* Handle ADP interrupt here */
-+ if (gpwrdn.b.adp_int) {
-+ DWC_PRINTF("ADP interrupt\n");
-+ CLEAR_GPWRDN_INTR(core_if, adp_int);
-+ dwc_otg_adp_handle_intr(core_if);
-+ retval |= 1;
-+ }
-+ if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) {
-+ DWC_PRINTF("STS CHNG interrupt asserted\n");
-+ CLEAR_GPWRDN_INTR(core_if, sts_chngint);
-+ dwc_otg_handle_pwrdn_stschng_intr(otg_dev);
-+
-+ retval |= 1;
-+ }
-+ if (core_if->lock)
-+ DWC_SPINUNLOCK(core_if->lock);
-+ return retval;
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
-@@ -0,0 +1,705 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $
-+ * $Revision: #13 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#if !defined(__DWC_CORE_IF_H__)
-+#define __DWC_CORE_IF_H__
-+
-+#include "dwc_os.h"
-+
-+/** @file
-+ * This file defines DWC_OTG Core API
-+ */
-+
-+struct dwc_otg_core_if;
-+typedef struct dwc_otg_core_if dwc_otg_core_if_t;
-+
-+/** Maximum number of Periodic FIFOs */
-+#define MAX_PERIO_FIFOS 15
-+/** Maximum number of Periodic FIFOs */
-+#define MAX_TX_FIFOS 15
-+
-+/** Maximum number of Endpoints/HostChannels */
-+#define MAX_EPS_CHANNELS 16
-+
-+extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr);
-+extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if);
-+
-+extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if);
-+
-+extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if);
-+extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if);
-+
-+extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if);
-+
-+/** This function should be called on every hardware interrupt. */
-+extern int32_t dwc_otg_handle_common_intr(void *otg_dev);
-+
-+/** @name OTG Core Parameters */
-+/** @{ */
-+
-+/**
-+ * Specifies the OTG capabilities. The driver will automatically
-+ * detect the value for this parameter if none is specified.
-+ * 0 - HNP and SRP capable (default)
-+ * 1 - SRP Only capable
-+ * 2 - No HNP/SRP capable
-+ */
-+extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if);
-+#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
-+#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
-+#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
-+#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
-+
-+extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if);
-+#define dwc_param_opt_default 1
-+
-+/**
-+ * Specifies whether to use slave or DMA mode for accessing the data
-+ * FIFOs. The driver will automatically detect the value for this
-+ * parameter if none is specified.
-+ * 0 - Slave
-+ * 1 - DMA (default, if available)
-+ */
-+extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if);
-+#define dwc_param_dma_enable_default 1
-+
-+/**
-+ * When DMA mode is enabled specifies whether to use
-+ * address DMA or DMA Descritor mode for accessing the data
-+ * FIFOs in device mode. The driver will automatically detect
-+ * the value for this parameter if none is specified.
-+ * 0 - address DMA
-+ * 1 - DMA Descriptor(default, if available)
-+ */
-+extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if);
-+//#define dwc_param_dma_desc_enable_default 1
-+#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708
-+
-+/** The DMA Burst size (applicable only for External DMA
-+ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ */
-+extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if);
-+#define dwc_param_dma_burst_size_default 32
-+
-+/**
-+ * Specifies the maximum speed of operation in host and device mode.
-+ * The actual speed depends on the speed of the attached device and
-+ * the value of phy_type. The actual speed depends on the speed of the
-+ * attached device.
-+ * 0 - High Speed (default)
-+ * 1 - Full Speed
-+ */
-+extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if);
-+#define dwc_param_speed_default 0
-+#define DWC_SPEED_PARAM_HIGH 0
-+#define DWC_SPEED_PARAM_FULL 1
-+
-+/** Specifies whether low power mode is supported when attached
-+ * to a Full Speed or Low Speed device in host mode.
-+ * 0 - Don't support low power mode (default)
-+ * 1 - Support low power mode
-+ */
-+extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
-+ core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t
-+ * core_if);
-+#define dwc_param_host_support_fs_ls_low_power_default 0
-+
-+/** Specifies the PHY clock rate in low power mode when connected to a
-+ * Low Speed device in host mode. This parameter is applicable only if
-+ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
-+ * then defaults to 6 MHZ otherwise 48 MHZ.
-+ *
-+ * 0 - 48 MHz
-+ * 1 - 6 MHz
-+ */
-+extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
-+ core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
-+ core_if);
-+#define dwc_param_host_ls_low_power_phy_clk_default 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
-+#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
-+
-+/**
-+ * 0 - Use cC FIFO size parameters
-+ * 1 - Allow dynamic FIFO sizing (default)
-+ */
-+extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t *
-+ core_if);
-+#define dwc_param_enable_dynamic_fifo_default 1
-+
-+/** Total number of 4-byte words in the data FIFO memory. This
-+ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
-+ * Tx FIFOs.
-+ * 32 to 32768 (default 8192)
-+ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ */
-+extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if);
-+//#define dwc_param_data_fifo_size_default 8192
-+#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708
-+
-+/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1064)
-+ */
-+extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if);
-+#define dwc_param_dev_rx_fifo_size_default 1064
-+
-+/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
-+ * when dynamic FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if);
-+#define dwc_param_dev_nperio_tx_fifo_size_default 1024
-+
-+/** Number of 4-byte words in each of the periodic Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val, int fifo_num);
-+extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if, int fifo_num);
-+#define dwc_param_dev_perio_tx_fifo_size_default 256
-+
-+/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if);
-+//#define dwc_param_host_rx_fifo_size_default 1024
-+#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708
-+
-+/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
-+ * when Dynamic FIFO sizing is enabled in the core.
-+ * 16 to 32768 (default 1024)
-+ */
-+extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if);
-+//#define dwc_param_host_nperio_tx_fifo_size_default 1024
-+#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708
-+
-+/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
-+ * FIFO sizing is enabled.
-+ * 16 to 32768 (default 1024)
-+ */
-+extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
-+ core_if);
-+//#define dwc_param_host_perio_tx_fifo_size_default 1024
-+#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708
-+
-+/** The maximum transfer size supported in bytes.
-+ * 2047 to 65,535 (default 65,535)
-+ */
-+extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if);
-+#define dwc_param_max_transfer_size_default 65535
-+
-+/** The maximum number of packets in a transfer.
-+ * 15 to 511 (default 511)
-+ */
-+extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if);
-+#define dwc_param_max_packet_count_default 511
-+
-+/** The number of host channel registers to use.
-+ * 1 to 16 (default 12)
-+ * Note: The FPGA configuration supports a maximum of 12 host channels.
-+ */
-+extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if);
-+//#define dwc_param_host_channels_default 12
-+#define dwc_param_host_channels_default 8 // Broadcom BCM2708
-+
-+/** The number of endpoints in addition to EP0 available for device
-+ * mode operations.
-+ * 1 to 15 (default 6 IN and OUT)
-+ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
-+ * endpoints in addition to EP0.
-+ */
-+extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if);
-+#define dwc_param_dev_endpoints_default 6
-+
-+/**
-+ * Specifies the type of PHY interface to use. By default, the driver
-+ * will automatically detect the phy_type.
-+ *
-+ * 0 - Full Speed PHY
-+ * 1 - UTMI+ (default)
-+ * 2 - ULPI
-+ */
-+extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if);
-+#define DWC_PHY_TYPE_PARAM_FS 0
-+#define DWC_PHY_TYPE_PARAM_UTMI 1
-+#define DWC_PHY_TYPE_PARAM_ULPI 2
-+#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
-+
-+/**
-+ * Specifies the UTMI+ Data Width. This parameter is
-+ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
-+ * PHY_TYPE, this parameter indicates the data width between
-+ * the MAC and the ULPI Wrapper.) Also, this parameter is
-+ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
-+ * to "8 and 16 bits", meaning that the core has been
-+ * configured to work at either data path width.
-+ *
-+ * 8 or 16 bits (default 16)
-+ */
-+extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if);
-+//#define dwc_param_phy_utmi_width_default 16
-+#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708
-+
-+/**
-+ * Specifies whether the ULPI operates at double or single
-+ * data rate. This parameter is only applicable if PHY_TYPE is
-+ * ULPI.
-+ *
-+ * 0 - single data rate ULPI interface with 8 bit wide data
-+ * bus (default)
-+ * 1 - double data rate ULPI interface with 4 bit wide data
-+ * bus
-+ */
-+extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if);
-+#define dwc_param_phy_ulpi_ddr_default 0
-+
-+/**
-+ * Specifies whether to use the internal or external supply to
-+ * drive the vbus with a ULPI phy.
-+ */
-+extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if);
-+#define DWC_PHY_ULPI_INTERNAL_VBUS 0
-+#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
-+#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
-+
-+/**
-+ * Specifies whether to use the I2Cinterface for full speed PHY. This
-+ * parameter is only applicable if PHY_TYPE is FS.
-+ * 0 - No (default)
-+ * 1 - Yes
-+ */
-+extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if);
-+#define dwc_param_i2c_enable_default 0
-+
-+extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if);
-+#define dwc_param_ulpi_fs_ls_default 0
-+
-+extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if);
-+#define dwc_param_ts_dline_default 0
-+
-+/**
-+ * Specifies whether dedicated transmit FIFOs are
-+ * enabled for non periodic IN endpoints in device mode
-+ * 0 - No
-+ * 1 - Yes
-+ */
-+extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t *
-+ core_if);
-+#define dwc_param_en_multiple_tx_fifo_default 1
-+
-+/** Number of 4-byte words in each of the Tx FIFOs in device
-+ * mode when dynamic FIFO sizing is enabled.
-+ * 4 to 768 (default 256)
-+ */
-+extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int fifo_num, int32_t val);
-+extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
-+ int fifo_num);
-+#define dwc_param_dev_tx_fifo_size_default 768
-+
-+/** Thresholding enable flag-
-+ * bit 0 - enable non-ISO Tx thresholding
-+ * bit 1 - enable ISO Tx thresholding
-+ * bit 2 - enable Rx thresholding
-+ */
-+extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num);
-+#define dwc_param_thr_ctl_default 0
-+
-+/** Thresholding length for Tx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if);
-+#define dwc_param_tx_thr_length_default 64
-+
-+/** Thresholding length for Rx
-+ * FIFOs in 32 bit DWORDs
-+ */
-+extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if);
-+#define dwc_param_rx_thr_length_default 64
-+
-+/**
-+ * Specifies whether LPM (Link Power Management) support is enabled
-+ */
-+extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if);
-+#define dwc_param_lpm_enable_default 1
-+
-+/**
-+ * Specifies whether PTI enhancement is enabled
-+ */
-+extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if);
-+#define dwc_param_pti_enable_default 0
-+
-+/**
-+ * Specifies whether MPI enhancement is enabled
-+ */
-+extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if);
-+#define dwc_param_mpi_enable_default 0
-+
-+/**
-+ * Specifies whether ADP capability is enabled
-+ */
-+extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if);
-+#define dwc_param_adp_enable_default 0
-+
-+/**
-+ * Specifies whether IC_USB capability is enabled
-+ */
-+
-+extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if);
-+#define dwc_param_ic_usb_cap_default 0
-+
-+extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if);
-+#define dwc_param_ahb_thr_ratio_default 0
-+
-+extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if);
-+#define dwc_param_power_down_default 0
-+
-+extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if);
-+#define dwc_param_reload_ctl_default 0
-+
-+extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if);
-+#define dwc_param_dev_out_nak_default 0
-+
-+extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if);
-+#define dwc_param_cont_on_bna_default 0
-+
-+extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if,
-+ int32_t val);
-+extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if);
-+#define dwc_param_ahb_single_default 0
-+
-+extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val);
-+extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if);
-+#define dwc_param_otg_ver_default 0
-+
-+/** @} */
-+
-+/** @name Access to registers and bit-fields */
-+
-+/**
-+ * Dump core registers and SPRAM
-+ */
-+extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if);
-+extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if);
-+
-+/**
-+ * Get host negotiation status.
-+ */
-+extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get srp status
-+ */
-+extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Set hnpreq bit in the GOTGCTL register.
-+ */
-+extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get Content of SNPSID register.
-+ */
-+extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get current mode.
-+ * Returns 0 if in device mode, and 1 if in host mode.
-+ */
-+extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get value of hnpcapable field in the GUSBCFG register
-+ */
-+extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of hnpcapable field in the GUSBCFG register
-+ */
-+extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of srpcapable field in the GUSBCFG register
-+ */
-+extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of srpcapable field in the GUSBCFG register
-+ */
-+extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of devspeed field in the DCFG register
-+ */
-+extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of devspeed field in the DCFG register
-+ */
-+extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get the value of busconnected field from the HPRT0 register
-+ */
-+extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Gets the device enumeration Speed.
-+ */
-+extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get value of prtpwr field from the HPRT0 register
-+ */
-+extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get value of flag indicating core state - hibernated or not
-+ */
-+extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Set value of prtpwr field from the HPRT0 register
-+ */
-+extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of prtsusp field from the HPRT0 regsiter
-+ */
-+extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of prtpwr field from the HPRT0 register
-+ */
-+extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of ModeChTimEn field from the HCFG regsiter
-+ */
-+extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of ModeChTimEn field from the HCFG regsiter
-+ */
-+extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of Fram Interval field from the HFIR regsiter
-+ */
-+extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of Frame Interval field from the HFIR regsiter
-+ */
-+extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Set value of prtres field from the HPRT0 register
-+ *FIXME Remove?
-+ */
-+extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of rmtwkupsig bit in DCTL register
-+ */
-+extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get value of prt_sleep_sts field from the GLPMCFG register
-+ */
-+extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get value of rem_wkup_en field from the GLPMCFG register
-+ */
-+extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Get value of appl_resp field from the GLPMCFG register
-+ */
-+extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of appl_resp field from the GLPMCFG register
-+ */
-+extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of hsic_connect field from the GLPMCFG register
-+ */
-+extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of hsic_connect field from the GLPMCFG register
-+ */
-+extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * Get value of inv_sel_hsic field from the GLPMCFG register.
-+ */
-+extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if);
-+/**
-+ * Set value of inv_sel_hsic field from the GLPMFG register.
-+ */
-+extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/*
-+ * Some functions for accessing registers
-+ */
-+
-+/**
-+ * GOTGCTL register
-+ */
-+extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * GUSBCFG register
-+ */
-+extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * GRXFSIZ register
-+ */
-+extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * GNPTXFSIZ register
-+ */
-+extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * GGPIO register
-+ */
-+extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * GUID register
-+ */
-+extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * HPRT0 register
-+ */
-+extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if);
-+extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val);
-+
-+/**
-+ * GHPTXFSIZE
-+ */
-+extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if);
-+
-+/** @} */
-+
-+#endif /* __DWC_CORE_IF_H__ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
-@@ -0,0 +1,117 @@
-+/* ==========================================================================
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_DBG_H__
-+#define __DWC_OTG_DBG_H__
-+
-+/** @file
-+ * This file defines debug levels.
-+ * Debugging support vanishes in non-debug builds.
-+ */
-+
-+/**
-+ * The Debug Level bit-mask variable.
-+ */
-+extern uint32_t g_dbg_lvl;
-+/**
-+ * Set the Debug Level variable.
-+ */
-+static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new)
-+{
-+ uint32_t old = g_dbg_lvl;
-+ g_dbg_lvl = new;
-+ return old;
-+}
-+
-+#define DBG_USER (0x1)
-+/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
-+#define DBG_CIL (0x2)
-+/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
-+ * messages */
-+#define DBG_CILV (0x20)
-+/** When debug level has the DBG_PCD bit set, display PCD (Device) debug
-+ * messages */
-+#define DBG_PCD (0x4)
-+/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
-+ * messages */
-+#define DBG_PCDV (0x40)
-+/** When debug level has the DBG_HCD bit set, display Host debug messages */
-+#define DBG_HCD (0x8)
-+/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
-+ * messages */
-+#define DBG_HCDV (0x80)
-+/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
-+ * mode. */
-+#define DBG_HCD_URB (0x800)
-+/** When debug level has the DBG_HCDI bit set, display host interrupt
-+ * messages. */
-+#define DBG_HCDI (0x1000)
-+
-+/** When debug level has any bit set, display debug messages */
-+#define DBG_ANY (0xFF)
-+
-+/** All debug messages off */
-+#define DBG_OFF 0
-+
-+/** Prefix string for DWC_DEBUG print macros. */
-+#define USB_DWC "DWC_otg: "
-+
-+/**
-+ * Print a debug message when the Global debug level variable contains
-+ * the bit defined in <code>lvl</code>.
-+ *
-+ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
-+ * @param[in] x - like printf
-+ *
-+ * Example:<p>
-+ * <code>
-+ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
-+ * </code>
-+ * <br>
-+ * results in:<br>
-+ * <code>
-+ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
-+ * </code>
-+ */
-+#ifdef DEBUG
-+
-+# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0)
-+# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x )
-+
-+# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
-+
-+#else
-+
-+# define DWC_DEBUGPL(lvl, x...) do{}while(0)
-+# define DWC_DEBUGP(x...)
-+
-+# define CHK_DEBUG_LEVEL(level) (0)
-+
-+#endif /*DEBUG*/
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
-@@ -0,0 +1,1757 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
-+ * $Revision: #92 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+/** @file
-+ * The dwc_otg_driver module provides the initialization and cleanup entry
-+ * points for the DWC_otg driver. This module will be dynamically installed
-+ * after Linux is booted using the insmod command. When the module is
-+ * installed, the dwc_otg_driver_init function is called. When the module is
-+ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
-+ *
-+ * This module also defines a data structure for the dwc_otg_driver, which is
-+ * used in conjunction with the standard ARM lm_device structure. These
-+ * structures allow the OTG driver to comply with the standard Linux driver
-+ * model in which devices and drivers are registered with a bus driver. This
-+ * has the benefit that Linux can expose attributes of the driver and device
-+ * in its special sysfs file system. Users can then read or write files in
-+ * this file system to perform diagnostics on the driver components or the
-+ * device.
-+ */
-+
-+#include "dwc_otg_os_dep.h"
-+#include "dwc_os.h"
-+#include "dwc_otg_dbg.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_attr.h"
-+#include "dwc_otg_core_if.h"
-+#include "dwc_otg_pcd_if.h"
-+#include "dwc_otg_hcd_if.h"
-+#include "dwc_otg_fiq_fsm.h"
-+
-+#define DWC_DRIVER_VERSION "3.00a 10-AUG-2012"
-+#define DWC_DRIVER_DESC "HS OTG USB Controller driver"
-+
-+bool microframe_schedule=true;
-+
-+static const char dwc_driver_name[] = "dwc_otg";
-+
-+
-+extern int pcd_init(
-+#ifdef LM_INTERFACE
-+ struct lm_device *_dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *_dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *dev
-+#endif
-+ );
-+extern int hcd_init(
-+#ifdef LM_INTERFACE
-+ struct lm_device *_dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *_dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *dev
-+#endif
-+ );
-+
-+extern int pcd_remove(
-+#ifdef LM_INTERFACE
-+ struct lm_device *_dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *_dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *_dev
-+#endif
-+ );
-+
-+extern void hcd_remove(
-+#ifdef LM_INTERFACE
-+ struct lm_device *_dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *_dev
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *_dev
-+#endif
-+ );
-+
-+extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
-+
-+/*-------------------------------------------------------------------------*/
-+/* Encapsulate the module parameter settings */
-+
-+struct dwc_otg_driver_module_params {
-+ int32_t opt;
-+ int32_t otg_cap;
-+ int32_t dma_enable;
-+ int32_t dma_desc_enable;
-+ int32_t dma_burst_size;
-+ int32_t speed;
-+ int32_t host_support_fs_ls_low_power;
-+ int32_t host_ls_low_power_phy_clk;
-+ int32_t enable_dynamic_fifo;
-+ int32_t data_fifo_size;
-+ int32_t dev_rx_fifo_size;
-+ int32_t dev_nperio_tx_fifo_size;
-+ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+ int32_t host_rx_fifo_size;
-+ int32_t host_nperio_tx_fifo_size;
-+ int32_t host_perio_tx_fifo_size;
-+ int32_t max_transfer_size;
-+ int32_t max_packet_count;
-+ int32_t host_channels;
-+ int32_t dev_endpoints;
-+ int32_t phy_type;
-+ int32_t phy_utmi_width;
-+ int32_t phy_ulpi_ddr;
-+ int32_t phy_ulpi_ext_vbus;
-+ int32_t i2c_enable;
-+ int32_t ulpi_fs_ls;
-+ int32_t ts_dline;
-+ int32_t en_multiple_tx_fifo;
-+ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
-+ uint32_t thr_ctl;
-+ uint32_t tx_thr_length;
-+ uint32_t rx_thr_length;
-+ int32_t pti_enable;
-+ int32_t mpi_enable;
-+ int32_t lpm_enable;
-+ int32_t ic_usb_cap;
-+ int32_t ahb_thr_ratio;
-+ int32_t power_down;
-+ int32_t reload_ctl;
-+ int32_t dev_out_nak;
-+ int32_t cont_on_bna;
-+ int32_t ahb_single;
-+ int32_t otg_ver;
-+ int32_t adp_enable;
-+};
-+
-+static struct dwc_otg_driver_module_params dwc_otg_module_params = {
-+ .opt = -1,
-+ .otg_cap = -1,
-+ .dma_enable = -1,
-+ .dma_desc_enable = -1,
-+ .dma_burst_size = -1,
-+ .speed = -1,
-+ .host_support_fs_ls_low_power = -1,
-+ .host_ls_low_power_phy_clk = -1,
-+ .enable_dynamic_fifo = -1,
-+ .data_fifo_size = -1,
-+ .dev_rx_fifo_size = -1,
-+ .dev_nperio_tx_fifo_size = -1,
-+ .dev_perio_tx_fifo_size = {
-+ /* dev_perio_tx_fifo_size_1 */
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1
-+ /* 15 */
-+ },
-+ .host_rx_fifo_size = -1,
-+ .host_nperio_tx_fifo_size = -1,
-+ .host_perio_tx_fifo_size = -1,
-+ .max_transfer_size = -1,
-+ .max_packet_count = -1,
-+ .host_channels = -1,
-+ .dev_endpoints = -1,
-+ .phy_type = -1,
-+ .phy_utmi_width = -1,
-+ .phy_ulpi_ddr = -1,
-+ .phy_ulpi_ext_vbus = -1,
-+ .i2c_enable = -1,
-+ .ulpi_fs_ls = -1,
-+ .ts_dline = -1,
-+ .en_multiple_tx_fifo = -1,
-+ .dev_tx_fifo_size = {
-+ /* dev_tx_fifo_size */
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1,
-+ -1
-+ /* 15 */
-+ },
-+ .thr_ctl = -1,
-+ .tx_thr_length = -1,
-+ .rx_thr_length = -1,
-+ .pti_enable = -1,
-+ .mpi_enable = -1,
-+ .lpm_enable = 0,
-+ .ic_usb_cap = -1,
-+ .ahb_thr_ratio = -1,
-+ .power_down = -1,
-+ .reload_ctl = -1,
-+ .dev_out_nak = -1,
-+ .cont_on_bna = -1,
-+ .ahb_single = -1,
-+ .otg_ver = -1,
-+ .adp_enable = -1,
-+};
-+
-+//Global variable to switch the fiq fix on or off
-+bool fiq_enable = 1;
-+// Global variable to enable the split transaction fix
-+bool fiq_fsm_enable = true;
-+//Bulk split-transaction NAK holdoff in microframes
-+uint16_t nak_holdoff = 8;
-+
-+unsigned short fiq_fsm_mask = 0x0F;
-+
-+/**
-+ * This function shows the Driver Version.
-+ */
-+static ssize_t version_show(struct device_driver *dev, char *buf)
-+{
-+ return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n",
-+ DWC_DRIVER_VERSION);
-+}
-+
-+static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
-+
-+/**
-+ * Global Debug Level Mask.
-+ */
-+uint32_t g_dbg_lvl = 0; /* OFF */
-+
-+/**
-+ * This function shows the driver Debug Level.
-+ */
-+static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
-+{
-+ return sprintf(buf, "0x%0x\n", g_dbg_lvl);
-+}
-+
-+/**
-+ * This function stores the driver Debug Level.
-+ */
-+static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
-+ size_t count)
-+{
-+ g_dbg_lvl = simple_strtoul(buf, NULL, 16);
-+ return count;
-+}
-+
-+static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show,
-+ dbg_level_store);
-+
-+/**
-+ * This function is called during module intialization
-+ * to pass module parameters to the DWC_OTG CORE.
-+ */
-+static int set_parameters(dwc_otg_core_if_t * core_if)
-+{
-+ int retval = 0;
-+ int i;
-+
-+ if (dwc_otg_module_params.otg_cap != -1) {
-+ retval +=
-+ dwc_otg_set_param_otg_cap(core_if,
-+ dwc_otg_module_params.otg_cap);
-+ }
-+ if (dwc_otg_module_params.dma_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_dma_enable(core_if,
-+ dwc_otg_module_params.
-+ dma_enable);
-+ }
-+ if (dwc_otg_module_params.dma_desc_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_dma_desc_enable(core_if,
-+ dwc_otg_module_params.
-+ dma_desc_enable);
-+ }
-+ if (dwc_otg_module_params.opt != -1) {
-+ retval +=
-+ dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt);
-+ }
-+ if (dwc_otg_module_params.dma_burst_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_dma_burst_size(core_if,
-+ dwc_otg_module_params.
-+ dma_burst_size);
-+ }
-+ if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) {
-+ retval +=
-+ dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
-+ dwc_otg_module_params.
-+ host_support_fs_ls_low_power);
-+ }
-+ if (dwc_otg_module_params.enable_dynamic_fifo != -1) {
-+ retval +=
-+ dwc_otg_set_param_enable_dynamic_fifo(core_if,
-+ dwc_otg_module_params.
-+ enable_dynamic_fifo);
-+ }
-+ if (dwc_otg_module_params.data_fifo_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_data_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ data_fifo_size);
-+ }
-+ if (dwc_otg_module_params.dev_rx_fifo_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_dev_rx_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ dev_rx_fifo_size);
-+ }
-+ if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ dev_nperio_tx_fifo_size);
-+ }
-+ if (dwc_otg_module_params.host_rx_fifo_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_host_rx_fifo_size(core_if,
-+ dwc_otg_module_params.host_rx_fifo_size);
-+ }
-+ if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ host_nperio_tx_fifo_size);
-+ }
-+ if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ host_perio_tx_fifo_size);
-+ }
-+ if (dwc_otg_module_params.max_transfer_size != -1) {
-+ retval +=
-+ dwc_otg_set_param_max_transfer_size(core_if,
-+ dwc_otg_module_params.
-+ max_transfer_size);
-+ }
-+ if (dwc_otg_module_params.max_packet_count != -1) {
-+ retval +=
-+ dwc_otg_set_param_max_packet_count(core_if,
-+ dwc_otg_module_params.
-+ max_packet_count);
-+ }
-+ if (dwc_otg_module_params.host_channels != -1) {
-+ retval +=
-+ dwc_otg_set_param_host_channels(core_if,
-+ dwc_otg_module_params.
-+ host_channels);
-+ }
-+ if (dwc_otg_module_params.dev_endpoints != -1) {
-+ retval +=
-+ dwc_otg_set_param_dev_endpoints(core_if,
-+ dwc_otg_module_params.
-+ dev_endpoints);
-+ }
-+ if (dwc_otg_module_params.phy_type != -1) {
-+ retval +=
-+ dwc_otg_set_param_phy_type(core_if,
-+ dwc_otg_module_params.phy_type);
-+ }
-+ if (dwc_otg_module_params.speed != -1) {
-+ retval +=
-+ dwc_otg_set_param_speed(core_if,
-+ dwc_otg_module_params.speed);
-+ }
-+ if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) {
-+ retval +=
-+ dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
-+ dwc_otg_module_params.
-+ host_ls_low_power_phy_clk);
-+ }
-+ if (dwc_otg_module_params.phy_ulpi_ddr != -1) {
-+ retval +=
-+ dwc_otg_set_param_phy_ulpi_ddr(core_if,
-+ dwc_otg_module_params.
-+ phy_ulpi_ddr);
-+ }
-+ if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) {
-+ retval +=
-+ dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
-+ dwc_otg_module_params.
-+ phy_ulpi_ext_vbus);
-+ }
-+ if (dwc_otg_module_params.phy_utmi_width != -1) {
-+ retval +=
-+ dwc_otg_set_param_phy_utmi_width(core_if,
-+ dwc_otg_module_params.
-+ phy_utmi_width);
-+ }
-+ if (dwc_otg_module_params.ulpi_fs_ls != -1) {
-+ retval +=
-+ dwc_otg_set_param_ulpi_fs_ls(core_if,
-+ dwc_otg_module_params.ulpi_fs_ls);
-+ }
-+ if (dwc_otg_module_params.ts_dline != -1) {
-+ retval +=
-+ dwc_otg_set_param_ts_dline(core_if,
-+ dwc_otg_module_params.ts_dline);
-+ }
-+ if (dwc_otg_module_params.i2c_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_i2c_enable(core_if,
-+ dwc_otg_module_params.
-+ i2c_enable);
-+ }
-+ if (dwc_otg_module_params.en_multiple_tx_fifo != -1) {
-+ retval +=
-+ dwc_otg_set_param_en_multiple_tx_fifo(core_if,
-+ dwc_otg_module_params.
-+ en_multiple_tx_fifo);
-+ }
-+ for (i = 0; i < 15; i++) {
-+ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
-+ retval +=
-+ dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ dev_perio_tx_fifo_size
-+ [i], i);
-+ }
-+ }
-+
-+ for (i = 0; i < 15; i++) {
-+ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
-+ retval += dwc_otg_set_param_dev_tx_fifo_size(core_if,
-+ dwc_otg_module_params.
-+ dev_tx_fifo_size
-+ [i], i);
-+ }
-+ }
-+ if (dwc_otg_module_params.thr_ctl != -1) {
-+ retval +=
-+ dwc_otg_set_param_thr_ctl(core_if,
-+ dwc_otg_module_params.thr_ctl);
-+ }
-+ if (dwc_otg_module_params.mpi_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_mpi_enable(core_if,
-+ dwc_otg_module_params.
-+ mpi_enable);
-+ }
-+ if (dwc_otg_module_params.pti_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_pti_enable(core_if,
-+ dwc_otg_module_params.
-+ pti_enable);
-+ }
-+ if (dwc_otg_module_params.lpm_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_lpm_enable(core_if,
-+ dwc_otg_module_params.
-+ lpm_enable);
-+ }
-+ if (dwc_otg_module_params.ic_usb_cap != -1) {
-+ retval +=
-+ dwc_otg_set_param_ic_usb_cap(core_if,
-+ dwc_otg_module_params.
-+ ic_usb_cap);
-+ }
-+ if (dwc_otg_module_params.tx_thr_length != -1) {
-+ retval +=
-+ dwc_otg_set_param_tx_thr_length(core_if,
-+ dwc_otg_module_params.tx_thr_length);
-+ }
-+ if (dwc_otg_module_params.rx_thr_length != -1) {
-+ retval +=
-+ dwc_otg_set_param_rx_thr_length(core_if,
-+ dwc_otg_module_params.
-+ rx_thr_length);
-+ }
-+ if (dwc_otg_module_params.ahb_thr_ratio != -1) {
-+ retval +=
-+ dwc_otg_set_param_ahb_thr_ratio(core_if,
-+ dwc_otg_module_params.ahb_thr_ratio);
-+ }
-+ if (dwc_otg_module_params.power_down != -1) {
-+ retval +=
-+ dwc_otg_set_param_power_down(core_if,
-+ dwc_otg_module_params.power_down);
-+ }
-+ if (dwc_otg_module_params.reload_ctl != -1) {
-+ retval +=
-+ dwc_otg_set_param_reload_ctl(core_if,
-+ dwc_otg_module_params.reload_ctl);
-+ }
-+
-+ if (dwc_otg_module_params.dev_out_nak != -1) {
-+ retval +=
-+ dwc_otg_set_param_dev_out_nak(core_if,
-+ dwc_otg_module_params.dev_out_nak);
-+ }
-+
-+ if (dwc_otg_module_params.cont_on_bna != -1) {
-+ retval +=
-+ dwc_otg_set_param_cont_on_bna(core_if,
-+ dwc_otg_module_params.cont_on_bna);
-+ }
-+
-+ if (dwc_otg_module_params.ahb_single != -1) {
-+ retval +=
-+ dwc_otg_set_param_ahb_single(core_if,
-+ dwc_otg_module_params.ahb_single);
-+ }
-+
-+ if (dwc_otg_module_params.otg_ver != -1) {
-+ retval +=
-+ dwc_otg_set_param_otg_ver(core_if,
-+ dwc_otg_module_params.otg_ver);
-+ }
-+ if (dwc_otg_module_params.adp_enable != -1) {
-+ retval +=
-+ dwc_otg_set_param_adp_enable(core_if,
-+ dwc_otg_module_params.
-+ adp_enable);
-+ }
-+ return retval;
-+}
-+
-+/**
-+ * This function is the top level interrupt handler for the Common
-+ * (Device and host modes) interrupts.
-+ */
-+static irqreturn_t dwc_otg_common_irq(int irq, void *dev)
-+{
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_handle_common_intr(dev);
-+ if (retval != 0) {
-+ S3C2410X_CLEAR_EINTPEND();
-+ }
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/**
-+ * This function is called when a lm_device is unregistered with the
-+ * dwc_otg_driver. This happens, for example, when the rmmod command is
-+ * executed. The device may or may not be electrically present. If it is
-+ * present, the driver stops device processing. Any resources used on behalf
-+ * of this device are freed.
-+ *
-+ * @param _dev
-+ */
-+#ifdef LM_INTERFACE
-+#define REM_RETVAL(n)
-+static void dwc_otg_driver_remove( struct lm_device *_dev )
-+{ dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev);
-+#elif defined(PCI_INTERFACE)
-+#define REM_RETVAL(n)
-+static void dwc_otg_driver_remove( struct pci_dev *_dev )
-+{ dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev);
-+#elif defined(PLATFORM_INTERFACE)
-+#define REM_RETVAL(n) n
-+static int dwc_otg_driver_remove( struct platform_device *_dev )
-+{ dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
-+#endif
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
-+
-+ if (!otg_dev) {
-+ /* Memory allocation for the dwc_otg_device failed. */
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-+ return REM_RETVAL(-ENOMEM);
-+ }
-+#ifndef DWC_DEVICE_ONLY
-+ if (otg_dev->hcd) {
-+ hcd_remove(_dev);
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-+ return REM_RETVAL(-EINVAL);
-+ }
-+#endif
-+
-+#ifndef DWC_HOST_ONLY
-+ if (otg_dev->pcd) {
-+ pcd_remove(_dev);
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__);
-+ return REM_RETVAL(-EINVAL);
-+ }
-+#endif
-+ /*
-+ * Free the IRQ
-+ */
-+ if (otg_dev->common_irq_installed) {
-+#ifdef PLATFORM_INTERFACE
-+ free_irq(platform_get_irq(_dev, 0), otg_dev);
-+#else
-+ free_irq(_dev->irq, otg_dev);
-+#endif
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__);
-+ return REM_RETVAL(-ENXIO);
-+ }
-+
-+ if (otg_dev->core_if) {
-+ dwc_otg_cil_remove(otg_dev->core_if);
-+ } else {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__);
-+ return REM_RETVAL(-ENXIO);
-+ }
-+
-+ /*
-+ * Remove the device attributes
-+ */
-+ dwc_otg_attr_remove(_dev);
-+
-+ /*
-+ * Return the memory.
-+ */
-+ if (otg_dev->os_dep.base) {
-+ iounmap(otg_dev->os_dep.base);
-+ }
-+ DWC_FREE(otg_dev);
-+
-+ /*
-+ * Clear the drvdata pointer.
-+ */
-+#ifdef LM_INTERFACE
-+ lm_set_drvdata(_dev, 0);
-+#elif defined(PCI_INTERFACE)
-+ release_mem_region(otg_dev->os_dep.rsrc_start,
-+ otg_dev->os_dep.rsrc_len);
-+ pci_set_drvdata(_dev, 0);
-+#elif defined(PLATFORM_INTERFACE)
-+ platform_set_drvdata(_dev, 0);
-+#endif
-+ return REM_RETVAL(0);
-+}
-+
-+/**
-+ * This function is called when an lm_device is bound to a
-+ * dwc_otg_driver. It creates the driver components required to
-+ * control the device (CIL, HCD, and PCD) and it initializes the
-+ * device. The driver components are stored in a dwc_otg_device
-+ * structure. A reference to the dwc_otg_device is saved in the
-+ * lm_device. This allows the driver to access the dwc_otg_device
-+ * structure on subsequent calls to driver methods for this device.
-+ *
-+ * @param _dev Bus device
-+ */
-+static int dwc_otg_driver_probe(
-+#ifdef LM_INTERFACE
-+ struct lm_device *_dev
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *_dev,
-+ const struct pci_device_id *id
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *_dev
-+#endif
-+ )
-+{
-+ int retval = 0;
-+ dwc_otg_device_t *dwc_otg_device;
-+ int devirq;
-+
-+ dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev);
-+#ifdef LM_INTERFACE
-+ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start);
-+#elif defined(PCI_INTERFACE)
-+ if (!id) {
-+ DWC_ERROR("Invalid pci_device_id %p", id);
-+ return -EINVAL;
-+ }
-+
-+ if (!_dev || (pci_enable_device(_dev) < 0)) {
-+ DWC_ERROR("Invalid pci_device %p", _dev);
-+ return -ENODEV;
-+ }
-+ dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0));
-+ /* other stuff needed as well? */
-+
-+#elif defined(PLATFORM_INTERFACE)
-+ dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n",
-+ (unsigned)_dev->resource->start,
-+ (unsigned)(_dev->resource->end - _dev->resource->start));
-+#endif
-+
-+ dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t));
-+
-+ if (!dwc_otg_device) {
-+ dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
-+ dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF;
-+ dwc_otg_device->os_dep.platformdev = _dev;
-+
-+ /*
-+ * Map the DWC_otg Core memory into virtual address space.
-+ */
-+#ifdef LM_INTERFACE
-+ dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K);
-+
-+ if (!dwc_otg_device->os_dep.base) {
-+ dev_err(&_dev->dev, "ioremap() failed\n");
-+ DWC_FREE(dwc_otg_device);
-+ return -ENOMEM;
-+ }
-+ dev_dbg(&_dev->dev, "base=0x%08x\n",
-+ (unsigned)dwc_otg_device->os_dep.base);
-+#elif defined(PCI_INTERFACE)
-+ _dev->current_state = PCI_D0;
-+ _dev->dev.power.power_state = PMSG_ON;
-+
-+ if (!_dev->irq) {
-+ DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!",
-+ pci_name(_dev));
-+ iounmap(dwc_otg_device->os_dep.base);
-+ DWC_FREE(dwc_otg_device);
-+ return -ENODEV;
-+ }
-+
-+ dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0);
-+ dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0);
-+ DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n",
-+ (unsigned)dwc_otg_device->os_dep.rsrc_start,
-+ (unsigned)dwc_otg_device->os_dep.rsrc_len);
-+ if (!request_mem_region
-+ (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len,
-+ "dwc_otg")) {
-+ dev_dbg(&_dev->dev, "error requesting memory\n");
-+ iounmap(dwc_otg_device->os_dep.base);
-+ DWC_FREE(dwc_otg_device);
-+ return -EFAULT;
-+ }
-+
-+ dwc_otg_device->os_dep.base =
-+ ioremap_nocache(dwc_otg_device->os_dep.rsrc_start,
-+ dwc_otg_device->os_dep.rsrc_len);
-+ if (dwc_otg_device->os_dep.base == NULL) {
-+ dev_dbg(&_dev->dev, "error mapping memory\n");
-+ release_mem_region(dwc_otg_device->os_dep.rsrc_start,
-+ dwc_otg_device->os_dep.rsrc_len);
-+ iounmap(dwc_otg_device->os_dep.base);
-+ DWC_FREE(dwc_otg_device);
-+ return -EFAULT;
-+ }
-+ dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n",
-+ dwc_otg_device->os_dep.base);
-+ dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base;
-+ dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n",
-+ dwc_otg_device->os_dep.base);
-+ dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__,
-+ (unsigned)dwc_otg_device->os_dep.rsrc_start,
-+ dwc_otg_device->os_dep.base);
-+
-+ pci_set_master(_dev);
-+ pci_set_drvdata(_dev, dwc_otg_device);
-+#elif defined(PLATFORM_INTERFACE)
-+ DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n",
-+ _dev->resource->start,
-+ _dev->resource->end - _dev->resource->start + 1);
-+#if 1
-+ if (!request_mem_region(_dev->resource[0].start,
-+ _dev->resource[0].end - _dev->resource[0].start + 1,
-+ "dwc_otg")) {
-+ dev_dbg(&_dev->dev, "error reserving mapped memory\n");
-+ retval = -EFAULT;
-+ goto fail;
-+ }
-+
-+ dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource[0].start,
-+ _dev->resource[0].end -
-+ _dev->resource[0].start+1);
-+ if (fiq_enable)
-+ {
-+ if (!request_mem_region(_dev->resource[1].start,
-+ _dev->resource[1].end - _dev->resource[1].start + 1,
-+ "dwc_otg")) {
-+ dev_dbg(&_dev->dev, "error reserving mapped memory\n");
-+ retval = -EFAULT;
-+ goto fail;
-+ }
-+
-+ dwc_otg_device->os_dep.mphi_base = ioremap_nocache(_dev->resource[1].start,
-+ _dev->resource[1].end -
-+ _dev->resource[1].start + 1);
-+ }
-+
-+#else
-+ {
-+ struct map_desc desc = {
-+ .virtual = IO_ADDRESS((unsigned)_dev->resource->start),
-+ .pfn = __phys_to_pfn((unsigned)_dev->resource->start),
-+ .length = SZ_128K,
-+ .type = MT_DEVICE
-+ };
-+ iotable_init(&desc, 1);
-+ dwc_otg_device->os_dep.base = (void *)desc.virtual;
-+ }
-+#endif
-+ if (!dwc_otg_device->os_dep.base) {
-+ dev_err(&_dev->dev, "ioremap() failed\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+ dev_dbg(&_dev->dev, "base=0x%08x\n",
-+ (unsigned)dwc_otg_device->os_dep.base);
-+#endif
-+
-+ /*
-+ * Initialize driver data to point to the global DWC_otg
-+ * Device structure.
-+ */
-+#ifdef LM_INTERFACE
-+ lm_set_drvdata(_dev, dwc_otg_device);
-+#elif defined(PLATFORM_INTERFACE)
-+ platform_set_drvdata(_dev, dwc_otg_device);
-+#endif
-+ dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
-+
-+ dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base);
-+ DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n",
-+ dwc_otg_device, dwc_otg_device->core_if);//GRAYG
-+
-+ if (!dwc_otg_device->core_if) {
-+ dev_err(&_dev->dev, "CIL initialization failed!\n");
-+ retval = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ dev_dbg(&_dev->dev, "Calling get_gsnpsid\n");
-+ /*
-+ * Attempt to ensure this device is really a DWC_otg Controller.
-+ * Read and verify the SNPSID register contents. The value should be
-+ * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3",
-+ * as in "OTG version 2.XX" or "OTG version 3.XX".
-+ */
-+
-+ if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F542000) &&
-+ ((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) {
-+ dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n",
-+ dwc_otg_get_gsnpsid(dwc_otg_device->core_if));
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Validate parameter values.
-+ */
-+ dev_dbg(&_dev->dev, "Calling set_parameters\n");
-+ if (set_parameters(dwc_otg_device->core_if)) {
-+ retval = -EINVAL;
-+ goto fail;
-+ }
-+
-+ /*
-+ * Create Device Attributes in sysfs
-+ */
-+ dev_dbg(&_dev->dev, "Calling attr_create\n");
-+ dwc_otg_attr_create(_dev);
-+
-+ /*
-+ * Disable the global interrupt until all the interrupt
-+ * handlers are installed.
-+ */
-+ dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n");
-+ dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
-+
-+ /*
-+ * Install the interrupt handler for the common interrupts before
-+ * enabling common interrupts in core_init below.
-+ */
-+
-+#if defined(PLATFORM_INTERFACE)
-+ devirq = platform_get_irq(_dev, fiq_enable ? 0 : 1);
-+#else
-+ devirq = _dev->irq;
-+#endif
-+ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
-+ devirq);
-+ dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq);
-+ retval = request_irq(devirq, dwc_otg_common_irq,
-+ IRQF_SHARED,
-+ "dwc_otg", dwc_otg_device);
-+ if (retval) {
-+ DWC_ERROR("request of irq%d failed\n", devirq);
-+ retval = -EBUSY;
-+ goto fail;
-+ } else {
-+ dwc_otg_device->common_irq_installed = 1;
-+ }
-+
-+#ifndef IRQF_TRIGGER_LOW
-+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
-+ dev_dbg(&_dev->dev, "Calling set_irq_type\n");
-+ set_irq_type(devirq,
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
-+ IRQT_LOW
-+#else
-+ IRQ_TYPE_LEVEL_LOW
-+#endif
-+ );
-+#endif
-+#endif /*IRQF_TRIGGER_LOW*/
-+
-+ /*
-+ * Initialize the DWC_otg core.
-+ */
-+ dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n");
-+ dwc_otg_core_init(dwc_otg_device->core_if);
-+
-+#ifndef DWC_HOST_ONLY
-+ /*
-+ * Initialize the PCD
-+ */
-+ dev_dbg(&_dev->dev, "Calling pcd_init\n");
-+ retval = pcd_init(_dev);
-+ if (retval != 0) {
-+ DWC_ERROR("pcd_init failed\n");
-+ dwc_otg_device->pcd = NULL;
-+ goto fail;
-+ }
-+#endif
-+#ifndef DWC_DEVICE_ONLY
-+ /*
-+ * Initialize the HCD
-+ */
-+ dev_dbg(&_dev->dev, "Calling hcd_init\n");
-+ retval = hcd_init(_dev);
-+ if (retval != 0) {
-+ DWC_ERROR("hcd_init failed\n");
-+ dwc_otg_device->hcd = NULL;
-+ goto fail;
-+ }
-+#endif
-+ /* Recover from drvdata having been overwritten by hcd_init() */
-+#ifdef LM_INTERFACE
-+ lm_set_drvdata(_dev, dwc_otg_device);
-+#elif defined(PLATFORM_INTERFACE)
-+ platform_set_drvdata(_dev, dwc_otg_device);
-+#elif defined(PCI_INTERFACE)
-+ pci_set_drvdata(_dev, dwc_otg_device);
-+ dwc_otg_device->os_dep.pcidev = _dev;
-+#endif
-+
-+ /*
-+ * Enable the global interrupt after all the interrupt
-+ * handlers are installed if there is no ADP support else
-+ * perform initial actions required for Internal ADP logic.
-+ */
-+ if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) {
-+ dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n");
-+ dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
-+ dev_dbg(&_dev->dev, "Done\n");
-+ } else
-+ dwc_otg_adp_start(dwc_otg_device->core_if,
-+ dwc_otg_is_host_mode(dwc_otg_device->core_if));
-+
-+ return 0;
-+
-+fail:
-+ dwc_otg_driver_remove(_dev);
-+ return retval;
-+}
-+
-+/**
-+ * This structure defines the methods to be called by a bus driver
-+ * during the lifecycle of a device on that bus. Both drivers and
-+ * devices are registered with a bus driver. The bus driver matches
-+ * devices to drivers based on information in the device and driver
-+ * structures.
-+ *
-+ * The probe function is called when the bus driver matches a device
-+ * to this driver. The remove function is called when a device is
-+ * unregistered with the bus driver.
-+ */
-+#ifdef LM_INTERFACE
-+static struct lm_driver dwc_otg_driver = {
-+ .drv = {.name = (char *)dwc_driver_name,},
-+ .probe = dwc_otg_driver_probe,
-+ .remove = dwc_otg_driver_remove,
-+ // 'suspend' and 'resume' absent
-+};
-+#elif defined(PCI_INTERFACE)
-+static const struct pci_device_id pci_ids[] = { {
-+ PCI_DEVICE(0x16c3, 0xabcd),
-+ .driver_data =
-+ (unsigned long)0xdeadbeef,
-+ }, { /* end: all zeroes */ }
-+};
-+
-+MODULE_DEVICE_TABLE(pci, pci_ids);
-+
-+/* pci driver glue; this is a "new style" PCI driver module */
-+static struct pci_driver dwc_otg_driver = {
-+ .name = "dwc_otg",
-+ .id_table = pci_ids,
-+
-+ .probe = dwc_otg_driver_probe,
-+ .remove = dwc_otg_driver_remove,
-+
-+ .driver = {
-+ .name = (char *)dwc_driver_name,
-+ },
-+};
-+#elif defined(PLATFORM_INTERFACE)
-+static struct platform_device_id platform_ids[] = {
-+ {
-+ .name = "bcm2708_usb",
-+ .driver_data = (kernel_ulong_t) 0xdeadbeef,
-+ },
-+ { /* end: all zeroes */ }
-+};
-+MODULE_DEVICE_TABLE(platform, platform_ids);
-+
-+static const struct of_device_id dwc_otg_of_match_table[] = {
-+ { .compatible = "brcm,bcm2708-usb", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, dwc_otg_of_match_table);
-+
-+static struct platform_driver dwc_otg_driver = {
-+ .driver = {
-+ .name = (char *)dwc_driver_name,
-+ .of_match_table = dwc_otg_of_match_table,
-+ },
-+ .id_table = platform_ids,
-+
-+ .probe = dwc_otg_driver_probe,
-+ .remove = dwc_otg_driver_remove,
-+ // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early'
-+};
-+#endif
-+
-+/**
-+ * This function is called when the dwc_otg_driver is installed with the
-+ * insmod command. It registers the dwc_otg_driver structure with the
-+ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
-+ * to be called. In addition, the bus driver will automatically expose
-+ * attributes defined for the device and driver in the special sysfs file
-+ * system.
-+ *
-+ * @return
-+ */
-+static int __init dwc_otg_driver_init(void)
-+{
-+ int retval = 0;
-+ int error;
-+ struct device_driver *drv;
-+
-+ if(fiq_fsm_enable && !fiq_enable) {
-+ printk(KERN_WARNING "dwc_otg: fiq_fsm_enable was set without fiq_enable! Correcting.\n");
-+ fiq_enable = 1;
-+ }
-+
-+ printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name,
-+ DWC_DRIVER_VERSION,
-+#ifdef LM_INTERFACE
-+ "logicmodule");
-+ retval = lm_driver_register(&dwc_otg_driver);
-+ drv = &dwc_otg_driver.drv;
-+#elif defined(PCI_INTERFACE)
-+ "pci");
-+ retval = pci_register_driver(&dwc_otg_driver);
-+ drv = &dwc_otg_driver.driver;
-+#elif defined(PLATFORM_INTERFACE)
-+ "platform");
-+ retval = platform_driver_register(&dwc_otg_driver);
-+ drv = &dwc_otg_driver.driver;
-+#endif
-+ if (retval < 0) {
-+ printk(KERN_ERR "%s retval=%d\n", __func__, retval);
-+ return retval;
-+ }
-+ printk(KERN_DEBUG "dwc_otg: FIQ %s\n", fiq_enable ? "enabled":"disabled");
-+ printk(KERN_DEBUG "dwc_otg: NAK holdoff %s\n", nak_holdoff ? "enabled":"disabled");
-+ printk(KERN_DEBUG "dwc_otg: FIQ split-transaction FSM %s\n", fiq_fsm_enable ? "enabled":"disabled");
-+
-+ error = driver_create_file(drv, &driver_attr_version);
-+#ifdef DEBUG
-+ error = driver_create_file(drv, &driver_attr_debuglevel);
-+#endif
-+ return retval;
-+}
-+
-+module_init(dwc_otg_driver_init);
-+
-+/**
-+ * This function is called when the driver is removed from the kernel
-+ * with the rmmod command. The driver unregisters itself with its bus
-+ * driver.
-+ *
-+ */
-+static void __exit dwc_otg_driver_cleanup(void)
-+{
-+ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
-+
-+#ifdef LM_INTERFACE
-+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel);
-+ driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version);
-+ lm_driver_unregister(&dwc_otg_driver);
-+#elif defined(PCI_INTERFACE)
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-+ pci_unregister_driver(&dwc_otg_driver);
-+#elif defined(PLATFORM_INTERFACE)
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
-+ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
-+ platform_driver_unregister(&dwc_otg_driver);
-+#endif
-+
-+ printk(KERN_INFO "%s module removed\n", dwc_driver_name);
-+}
-+
-+module_exit(dwc_otg_driver_cleanup);
-+
-+MODULE_DESCRIPTION(DWC_DRIVER_DESC);
-+MODULE_AUTHOR("Synopsys Inc.");
-+MODULE_LICENSE("GPL");
-+
-+module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
-+MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
-+module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
-+MODULE_PARM_DESC(opt, "OPT Mode");
-+module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
-+MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
-+
-+module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int,
-+ 0444);
-+MODULE_PARM_DESC(dma_desc_enable,
-+ "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
-+
-+module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int,
-+ 0444);
-+MODULE_PARM_DESC(dma_burst_size,
-+ "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
-+module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
-+MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
-+module_param_named(host_support_fs_ls_low_power,
-+ dwc_otg_module_params.host_support_fs_ls_low_power, int,
-+ 0444);
-+MODULE_PARM_DESC(host_support_fs_ls_low_power,
-+ "Support Low Power w/FS or LS 0=Support 1=Don't Support");
-+module_param_named(host_ls_low_power_phy_clk,
-+ dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
-+MODULE_PARM_DESC(host_ls_low_power_phy_clk,
-+ "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
-+module_param_named(enable_dynamic_fifo,
-+ dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
-+MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
-+module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int,
-+ 0444);
-+MODULE_PARM_DESC(data_fifo_size,
-+ "Total number of words in the data FIFO memory 32-32768");
-+module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size,
-+ int, 0444);
-+MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(dev_nperio_tx_fifo_size,
-+ dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(dev_nperio_tx_fifo_size,
-+ "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(dev_perio_tx_fifo_size_1,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_1,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_2,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_2,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_3,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_3,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_4,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_4,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_5,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_5,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_6,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_6,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_7,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_7,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_8,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_8,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_9,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_9,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_10,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_10,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_11,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_11,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_12,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_12,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_13,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_13,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_14,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_14,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(dev_perio_tx_fifo_size_15,
-+ dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_perio_tx_fifo_size_15,
-+ "Number of words in the periodic Tx FIFO 4-768");
-+module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size,
-+ int, 0444);
-+MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
-+module_param_named(host_nperio_tx_fifo_size,
-+ dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_nperio_tx_fifo_size,
-+ "Number of words in the non-periodic Tx FIFO 16-32768");
-+module_param_named(host_perio_tx_fifo_size,
-+ dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
-+MODULE_PARM_DESC(host_perio_tx_fifo_size,
-+ "Number of words in the host periodic Tx FIFO 16-32768");
-+module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size,
-+ int, 0444);
-+/** @todo Set the max to 512K, modify checks */
-+MODULE_PARM_DESC(max_transfer_size,
-+ "The maximum transfer size supported in bytes 2047-65535");
-+module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count,
-+ int, 0444);
-+MODULE_PARM_DESC(max_packet_count,
-+ "The maximum number of packets in a transfer 15-511");
-+module_param_named(host_channels, dwc_otg_module_params.host_channels, int,
-+ 0444);
-+MODULE_PARM_DESC(host_channels,
-+ "The number of host channel registers to use 1-16");
-+module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int,
-+ 0444);
-+MODULE_PARM_DESC(dev_endpoints,
-+ "The number of endpoints in addition to EP0 available for device mode 1-15");
-+module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
-+MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
-+module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int,
-+ 0444);
-+MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
-+module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ddr,
-+ "ULPI at double or single data rate 0=Single 1=Double");
-+module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus,
-+ int, 0444);
-+MODULE_PARM_DESC(phy_ulpi_ext_vbus,
-+ "ULPI PHY using internal or external vbus 0=Internal");
-+module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
-+MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
-+module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
-+MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
-+module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
-+MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
-+module_param_named(debug, g_dbg_lvl, int, 0444);
-+MODULE_PARM_DESC(debug, "");
-+
-+module_param_named(en_multiple_tx_fifo,
-+ dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
-+MODULE_PARM_DESC(en_multiple_tx_fifo,
-+ "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
-+module_param_named(dev_tx_fifo_size_1,
-+ dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_2,
-+ dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_3,
-+ dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_4,
-+ dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_5,
-+ dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_6,
-+ dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_7,
-+ dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_8,
-+ dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_9,
-+ dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_10,
-+ dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_11,
-+ dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_12,
-+ dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_13,
-+ dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_14,
-+ dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
-+module_param_named(dev_tx_fifo_size_15,
-+ dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
-+MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
-+
-+module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
-+MODULE_PARM_DESC(thr_ctl,
-+ "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
-+module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int,
-+ 0444);
-+MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
-+module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int,
-+ 0444);
-+MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
-+
-+module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
-+module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
-+module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444);
-+MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled");
-+module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444);
-+MODULE_PARM_DESC(ic_usb_cap,
-+ "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled");
-+module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int,
-+ 0444);
-+MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio");
-+module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444);
-+MODULE_PARM_DESC(power_down, "Power Down Mode");
-+module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444);
-+MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control");
-+module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444);
-+MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK");
-+module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444);
-+MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA");
-+module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444);
-+MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support");
-+module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444);
-+MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled");
-+module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444);
-+MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0");
-+module_param(microframe_schedule, bool, 0444);
-+MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler");
-+
-+module_param(fiq_enable, bool, 0444);
-+MODULE_PARM_DESC(fiq_enable, "Enable the FIQ");
-+module_param(nak_holdoff, ushort, 0644);
-+MODULE_PARM_DESC(nak_holdoff, "Throttle duration for bulk split-transaction endpoints on a NAK. Default 8");
-+module_param(fiq_fsm_enable, bool, 0444);
-+MODULE_PARM_DESC(fiq_fsm_enable, "Enable the FIQ to perform split transactions as defined by fiq_fsm_mask");
-+module_param(fiq_fsm_mask, ushort, 0444);
-+MODULE_PARM_DESC(fiq_fsm_mask, "Bitmask of transactions to perform in the FIQ.\n"
-+ "Bit 0 : Non-periodic split transactions\n"
-+ "Bit 1 : Periodic split transactions\n"
-+ "Bit 2 : High-speed multi-transfer isochronous\n"
-+ "All other bits should be set 0.");
-+
-+
-+/** @page "Module Parameters"
-+ *
-+ * The following parameters may be specified when starting the module.
-+ * These parameters define how the DWC_otg controller should be
-+ * configured. Parameter values are passed to the CIL initialization
-+ * function dwc_otg_cil_init
-+ *
-+ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
-+ *
-+
-+ <table>
-+ <tr><td>Parameter Name</td><td>Meaning</td></tr>
-+
-+ <tr>
-+ <td>otg_cap</td>
-+ <td>Specifies the OTG capabilities. The driver will automatically detect the
-+ value for this parameter if none is specified.
-+ - 0: HNP and SRP capable (default, if available)
-+ - 1: SRP Only capable
-+ - 2: No HNP/SRP capable
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_enable</td>
-+ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Slave
-+ - 1: DMA (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dma_burst_size</td>
-+ <td>The DMA Burst size (applicable only for External DMA Mode).
-+ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
-+ </td></tr>
-+
-+ <tr>
-+ <td>speed</td>
-+ <td>Specifies the maximum speed of operation in host and device mode. The
-+ actual speed depends on the speed of the attached device and the value of
-+ phy_type.
-+ - 0: High Speed (default)
-+ - 1: Full Speed
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_support_fs_ls_low_power</td>
-+ <td>Specifies whether low power mode is supported when attached to a Full
-+ Speed or Low Speed device in host mode.
-+ - 0: Don't support low power mode (default)
-+ - 1: Support low power mode
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_ls_low_power_phy_clk</td>
-+ <td>Specifies the PHY clock rate in low power mode when connected to a Low
-+ Speed device in host mode. This parameter is applicable only if
-+ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
-+ - 0: 48 MHz (default)
-+ - 1: 6 MHz
-+ </td></tr>
-+
-+ <tr>
-+ <td>enable_dynamic_fifo</td>
-+ <td> Specifies whether FIFOs may be resized by the driver software.
-+ - 0: Use cC FIFO size parameters
-+ - 1: Allow dynamic FIFO sizing (default)
-+ </td></tr>
-+
-+ <tr>
-+ <td>data_fifo_size</td>
-+ <td>Total number of 4-byte words in the data FIFO memory. This memory
-+ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
-+ - Values: 32 to 32768 (default 8192)
-+
-+ Note: The total FIFO memory depth in the FPGA configuration is 8192.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
-+ FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1064)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
-+ dynamic FIFO sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_rx_fifo_size</td>
-+ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_nperio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
-+ dynamic FIFO sizing is enabled in the core.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_perio_tx_fifo_size</td>
-+ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
-+ sizing is enabled.
-+ - Values: 16 to 32768 (default 1024)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_transfer_size</td>
-+ <td>The maximum transfer size supported in bytes.
-+ - Values: 2047 to 65,535 (default 65,535)
-+ </td></tr>
-+
-+ <tr>
-+ <td>max_packet_count</td>
-+ <td>The maximum number of packets in a transfer.
-+ - Values: 15 to 511 (default 511)
-+ </td></tr>
-+
-+ <tr>
-+ <td>host_channels</td>
-+ <td>The number of host channel registers to use.
-+ - Values: 1 to 16 (default 12)
-+
-+ Note: The FPGA configuration supports a maximum of 12 host channels.
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_endpoints</td>
-+ <td>The number of endpoints in addition to EP0 available for device mode
-+ operations.
-+ - Values: 1 to 15 (default 6 IN and OUT)
-+
-+ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
-+ addition to EP0.
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_type</td>
-+ <td>Specifies the type of PHY interface to use. By default, the driver will
-+ automatically detect the phy_type.
-+ - 0: Full Speed
-+ - 1: UTMI+ (default, if available)
-+ - 2: ULPI
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_utmi_width</td>
-+ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
-+ phy_type of UTMI+. Also, this parameter is applicable only if the
-+ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
-+ core has been configured to work at either data path width.
-+ - Values: 8 or 16 bits (default 16)
-+ </td></tr>
-+
-+ <tr>
-+ <td>phy_ulpi_ddr</td>
-+ <td>Specifies whether the ULPI operates at double or single data rate. This
-+ parameter is only applicable if phy_type is ULPI.
-+ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
-+ - 1: double data rate ULPI interface with 4 bit wide data bus
-+ </td></tr>
-+
-+ <tr>
-+ <td>i2c_enable</td>
-+ <td>Specifies whether to use the I2C interface for full speed PHY. This
-+ parameter is only applicable if PHY_TYPE is FS.
-+ - 0: Disabled (default)
-+ - 1: Enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>ulpi_fs_ls</td>
-+ <td>Specifies whether to use ULPI FS/LS mode only.
-+ - 0: Disabled (default)
-+ - 1: Enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>ts_dline</td>
-+ <td>Specifies whether term select D-Line pulsing for all PHYs is enabled.
-+ - 0: Disabled (default)
-+ - 1: Enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>en_multiple_tx_fifo</td>
-+ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Disabled
-+ - 1: Enabled (default, if available)
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
-+ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
-+ when dynamic FIFO sizing is enabled.
-+ - Values: 4 to 768 (default 256)
-+ </td></tr>
-+
-+ <tr>
-+ <td>tx_thr_length</td>
-+ <td>Transmit Threshold length in 32 bit double words
-+ - Values: 8 to 128 (default 64)
-+ </td></tr>
-+
-+ <tr>
-+ <td>rx_thr_length</td>
-+ <td>Receive Threshold length in 32 bit double words
-+ - Values: 8 to 128 (default 64)
-+ </td></tr>
-+
-+<tr>
-+ <td>thr_ctl</td>
-+ <td>Specifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of
-+ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and
-+ Rx transfers accordingly.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - Values: 0 to 7 (default 0)
-+ Bit values indicate:
-+ - 0: Thresholding disabled
-+ - 1: Thresholding enabled
-+ </td></tr>
-+
-+<tr>
-+ <td>dma_desc_enable</td>
-+ <td>Specifies whether to enable Descriptor DMA mode.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Descriptor DMA disabled
-+ - 1: Descriptor DMA (default, if available)
-+ </td></tr>
-+
-+<tr>
-+ <td>mpi_enable</td>
-+ <td>Specifies whether to enable MPI enhancement mode.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: MPI disabled (default)
-+ - 1: MPI enable
-+ </td></tr>
-+
-+<tr>
-+ <td>pti_enable</td>
-+ <td>Specifies whether to enable PTI enhancement support.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: PTI disabled (default)
-+ - 1: PTI enable
-+ </td></tr>
-+
-+<tr>
-+ <td>lpm_enable</td>
-+ <td>Specifies whether to enable LPM support.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: LPM disabled
-+ - 1: LPM enable (default, if available)
-+ </td></tr>
-+
-+<tr>
-+ <td>ic_usb_cap</td>
-+ <td>Specifies whether to enable IC_USB capability.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: IC_USB disabled (default, if available)
-+ - 1: IC_USB enable
-+ </td></tr>
-+
-+<tr>
-+ <td>ahb_thr_ratio</td>
-+ <td>Specifies AHB Threshold ratio.
-+ - Values: 0 to 3 (default 0)
-+ </td></tr>
-+
-+<tr>
-+ <td>power_down</td>
-+ <td>Specifies Power Down(Hibernation) Mode.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: Power Down disabled (default)
-+ - 2: Power Down enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>reload_ctl</td>
-+ <td>Specifies whether dynamic reloading of the HFIR register is allowed during
-+ run time. The driver will automatically detect the value for this parameter if
-+ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0
-+ the core might misbehave.
-+ - 0: Reload Control disabled (default)
-+ - 1: Reload Control enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>dev_out_nak</td>
-+ <td>Specifies whether Device OUT NAK enhancement enabled or no.
-+ The driver will automatically detect the value for this parameter if
-+ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
-+ - 0: The core does not set NAK after Bulk OUT transfer complete (default)
-+ - 1: The core sets NAK after Bulk OUT transfer complete
-+ </td></tr>
-+
-+ <tr>
-+ <td>cont_on_bna</td>
-+ <td>Specifies whether Enable Continue on BNA enabled or no.
-+ After receiving BNA interrupt the core disables the endpoint,when the
-+ endpoint is re-enabled by the application the
-+ - 0: Core starts processing from the DOEPDMA descriptor (default)
-+ - 1: Core starts processing from the descriptor which received the BNA.
-+ This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
-+ </td></tr>
-+
-+ <tr>
-+ <td>ahb_single</td>
-+ <td>This bit when programmed supports SINGLE transfers for remainder data
-+ in a transfer for DMA mode of operation.
-+ - 0: The remainder data will be sent using INCR burst size (default)
-+ - 1: The remainder data will be sent using SINGLE burst size.
-+ </td></tr>
-+
-+<tr>
-+ <td>adp_enable</td>
-+ <td>Specifies whether ADP feature is enabled.
-+ The driver will automatically detect the value for this parameter if none is
-+ specified.
-+ - 0: ADP feature disabled (default)
-+ - 1: ADP feature enabled
-+ </td></tr>
-+
-+ <tr>
-+ <td>otg_ver</td>
-+ <td>Specifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3
-+ USB OTG device.
-+ - 0: OTG 2.0 support disabled (default)
-+ - 1: OTG 2.0 support enabled
-+ </td></tr>
-+
-+*/
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h
-@@ -0,0 +1,86 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
-+ * $Revision: #19 $
-+ * $Date: 2010/11/15 $
-+ * $Change: 1627671 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_DRIVER_H__
-+#define __DWC_OTG_DRIVER_H__
-+
-+/** @file
-+ * This file contains the interface to the Linux driver.
-+ */
-+#include "dwc_otg_os_dep.h"
-+#include "dwc_otg_core_if.h"
-+
-+/* Type declarations */
-+struct dwc_otg_pcd;
-+struct dwc_otg_hcd;
-+
-+/**
-+ * This structure is a wrapper that encapsulates the driver components used to
-+ * manage a single DWC_otg controller.
-+ */
-+typedef struct dwc_otg_device {
-+ /** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE
-+ * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD
-+ * require this. */
-+ struct os_dependent os_dep;
-+
-+ /** Pointer to the core interface structure. */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Pointer to the PCD structure. */
-+ struct dwc_otg_pcd *pcd;
-+
-+ /** Pointer to the HCD structure. */
-+ struct dwc_otg_hcd *hcd;
-+
-+ /** Flag to indicate whether the common IRQ handler is installed. */
-+ uint8_t common_irq_installed;
-+
-+} dwc_otg_device_t;
-+
-+/*We must clear S3C24XX_EINTPEND external interrupt register
-+ * because after clearing in this register trigerred IRQ from
-+ * H/W core in kernel interrupt can be occured again before OTG
-+ * handlers clear all IRQ sources of Core registers because of
-+ * timing latencies and Low Level IRQ Type.
-+ */
-+#ifdef CONFIG_MACH_IPMATE
-+#define S3C2410X_CLEAR_EINTPEND() \
-+do { \
-+ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \
-+} while (0)
-+#else
-+#define S3C2410X_CLEAR_EINTPEND() do { } while (0)
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c
-@@ -0,0 +1,1355 @@
-+/*
-+ * dwc_otg_fiq_fsm.c - The finite state machine FIQ
-+ *
-+ * Copyright (c) 2013 Raspberry Pi Foundation
-+ *
-+ * Author: Jonathan Bell <jonathan@raspberrypi.org>
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of Raspberry Pi nor the
-+ * names of its contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * This FIQ implements functionality that performs split transactions on
-+ * the dwc_otg hardware without any outside intervention. A split transaction
-+ * is "queued" by nominating a specific host channel to perform the entirety
-+ * of a split transaction. This FIQ will then perform the microframe-precise
-+ * scheduling required in each phase of the transaction until completion.
-+ *
-+ * The FIQ functionality is glued into the Synopsys driver via the entry point
-+ * in the FSM enqueue function, and at the exit point in handling a HC interrupt
-+ * for a FSM-enabled channel.
-+ *
-+ * NB: Large parts of this implementation have architecture-specific code.
-+ * For porting this functionality to other ARM machines, the minimum is required:
-+ * - An interrupt controller allowing the top-level dwc USB interrupt to be routed
-+ * to the FIQ
-+ * - A method of forcing a software generated interrupt from FIQ mode that then
-+ * triggers an IRQ entry (with the dwc USB handler called by this IRQ number)
-+ * - Guaranteed interrupt routing such that both the FIQ and SGI occur on the same
-+ * processor core - there is no locking between the FIQ and IRQ (aside from
-+ * local_fiq_disable)
-+ *
-+ */
-+
-+#include "dwc_otg_fiq_fsm.h"
-+
-+
-+char buffer[1000*16];
-+int wptr;
-+void notrace _fiq_print(enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...)
-+{
-+ enum fiq_debug_level dbg_lvl_req = FIQDBG_ERR;
-+ va_list args;
-+ char text[17];
-+ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + 0x408) };
-+
-+ if((dbg_lvl & dbg_lvl_req) || dbg_lvl == FIQDBG_ERR)
-+ {
-+ snprintf(text, 9, " %4d:%1u ", hfnum.b.frnum/8, hfnum.b.frnum & 7);
-+ va_start(args, fmt);
-+ vsnprintf(text+8, 9, fmt, args);
-+ va_end(args);
-+
-+ memcpy(buffer + wptr, text, 16);
-+ wptr = (wptr + 16) % sizeof(buffer);
-+ }
-+}
-+
-+/**
-+ * fiq_fsm_spin_lock() - ARMv6+ bare bones spinlock
-+ * Must be called with local interrupts and FIQ disabled.
-+ */
-+#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP)
-+inline void fiq_fsm_spin_lock(fiq_lock_t *lock)
-+{
-+ unsigned long tmp;
-+ uint32_t newval;
-+ fiq_lock_t lockval;
-+ smp_mb__before_spinlock();
-+ /* Nested locking, yay. If we are on the same CPU as the fiq, then the disable
-+ * will be sufficient. If we are on a different CPU, then the lock protects us. */
-+ prefetchw(&lock->slock);
-+ asm volatile (
-+ "1: ldrex %0, [%3]\n"
-+ " add %1, %0, %4\n"
-+ " strex %2, %1, [%3]\n"
-+ " teq %2, #0\n"
-+ " bne 1b"
-+ : "=&r" (lockval), "=&r" (newval), "=&r" (tmp)
-+ : "r" (&lock->slock), "I" (1 << 16)
-+ : "cc");
-+
-+ while (lockval.tickets.next != lockval.tickets.owner) {
-+ wfe();
-+ lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner);
-+ }
-+ smp_mb();
-+}
-+#else
-+inline void fiq_fsm_spin_lock(fiq_lock_t *lock) { }
-+#endif
-+
-+/**
-+ * fiq_fsm_spin_unlock() - ARMv6+ bare bones spinunlock
-+ */
-+#if defined(CONFIG_ARCH_BCM2835) && defined(CONFIG_SMP)
-+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock)
-+{
-+ smp_mb();
-+ lock->tickets.owner++;
-+ dsb_sev();
-+}
-+#else
-+inline void fiq_fsm_spin_unlock(fiq_lock_t *lock) { }
-+#endif
-+
-+/**
-+ * fiq_fsm_restart_channel() - Poke channel enable bit for a split transaction
-+ * @channel: channel to re-enable
-+ */
-+static void fiq_fsm_restart_channel(struct fiq_state *st, int n, int force)
-+{
-+ hcchar_data_t hcchar = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR) };
-+
-+ hcchar.b.chen = 0;
-+ if (st->channel[n].hcchar_copy.b.eptype & 0x1) {
-+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) };
-+ /* Hardware bug workaround: update the ssplit index */
-+ if (st->channel[n].hcsplt_copy.b.spltena)
-+ st->channel[n].expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF;
-+
-+ hcchar.b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
-+ }
-+
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32);
-+ hcchar.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
-+ hcchar.b.chen = 1;
-+
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, hcchar.d32);
-+ fiq_print(FIQDBG_INT, st, "HCGO %01d %01d", n, force);
-+}
-+
-+/**
-+ * fiq_fsm_setup_csplit() - Prepare a host channel for a CSplit transaction stage
-+ * @st: Pointer to the channel's state
-+ * @n : channel number
-+ *
-+ * Change host channel registers to perform a complete-split transaction. Being mindful of the
-+ * endpoint direction, set control regs up correctly.
-+ */
-+static void notrace fiq_fsm_setup_csplit(struct fiq_state *st, int n)
-+{
-+ hcsplt_data_t hcsplt = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT) };
-+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) };
-+
-+ hcsplt.b.compsplt = 1;
-+ if (st->channel[n].hcchar_copy.b.epdir == 1) {
-+ // If IN, the CSPLIT result contains the data or a hub handshake. hctsiz = maxpacket.
-+ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize;
-+ } else {
-+ // If OUT, the CSPLIT result contains handshake only.
-+ hctsiz.b.xfersize = 0;
-+ }
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32);
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32);
-+ mb();
-+}
-+
-+static inline int notrace fiq_get_xfer_len(struct fiq_state *st, int n)
-+{
-+ /* The xfersize register is a bit wonky. For IN transfers, it decrements by the packet size. */
-+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) };
-+
-+ if (st->channel[n].hcchar_copy.b.epdir == 0) {
-+ return st->channel[n].hctsiz_copy.b.xfersize;
-+ } else {
-+ return st->channel[n].hctsiz_copy.b.xfersize - hctsiz.b.xfersize;
-+ }
-+
-+}
-+
-+
-+/**
-+ * fiq_increment_dma_buf() - update DMA address for bounce buffers after a CSPLIT
-+ *
-+ * Of use only for IN periodic transfers.
-+ */
-+static int notrace fiq_increment_dma_buf(struct fiq_state *st, int num_channels, int n)
-+{
-+ hcdma_data_t hcdma;
-+ int i = st->channel[n].dma_info.index;
-+ int len;
-+ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base;
-+
-+ len = fiq_get_xfer_len(st, n);
-+ fiq_print(FIQDBG_INT, st, "LEN: %03d", len);
-+ st->channel[n].dma_info.slot_len[i] = len;
-+ i++;
-+ if (i > 6)
-+ BUG();
-+
-+ hcdma.d32 = (dma_addr_t) &blob->channel[n].index[i].buf[0];
-+ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32);
-+ st->channel[n].dma_info.index = i;
-+ return 0;
-+}
-+
-+/**
-+ * fiq_reload_hctsiz() - for IN transactions, reset HCTSIZ
-+ */
-+static void notrace fiq_fsm_reload_hctsiz(struct fiq_state *st, int n)
-+{
-+ hctsiz_data_t hctsiz = { .d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ) };
-+ hctsiz.b.xfersize = st->channel[n].hctsiz_copy.b.xfersize;
-+ hctsiz.b.pktcnt = 1;
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32);
-+}
-+
-+/**
-+ * fiq_iso_out_advance() - update DMA address and split position bits
-+ * for isochronous OUT transactions.
-+ *
-+ * Returns 1 if this is the last packet queued, 0 otherwise. Split-ALL and
-+ * Split-BEGIN states are not handled - this is done when the transaction was queued.
-+ *
-+ * This function must only be called from the FIQ_ISO_OUT_ACTIVE state.
-+ */
-+static int notrace fiq_iso_out_advance(struct fiq_state *st, int num_channels, int n)
-+{
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ hcdma_data_t hcdma;
-+ struct fiq_dma_blob *blob = (struct fiq_dma_blob *) st->dma_base;
-+ int last = 0;
-+ int i = st->channel[n].dma_info.index;
-+
-+ fiq_print(FIQDBG_INT, st, "ADV %01d %01d ", n, i);
-+ i++;
-+ if (i == 4)
-+ last = 1;
-+ if (st->channel[n].dma_info.slot_len[i+1] == 255)
-+ last = 1;
-+
-+ /* New DMA address - address of bounce buffer referred to in index */
-+ hcdma.d32 = (uint32_t) &blob->channel[n].index[i].buf[0];
-+ //hcdma.d32 = FIQ_READ(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n));
-+ //hcdma.d32 += st->channel[n].dma_info.slot_len[i];
-+ fiq_print(FIQDBG_INT, st, "LAST: %01d ", last);
-+ fiq_print(FIQDBG_INT, st, "LEN: %03d", st->channel[n].dma_info.slot_len[i]);
-+ hcsplt.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT);
-+ hctsiz.d32 = FIQ_READ(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ);
-+ hcsplt.b.xactpos = (last) ? ISOC_XACTPOS_END : ISOC_XACTPOS_MID;
-+ /* Set up new packet length */
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.xfersize = st->channel[n].dma_info.slot_len[i];
-+ fiq_print(FIQDBG_INT, st, "%08x", hctsiz.d32);
-+
-+ st->channel[n].dma_info.index++;
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCSPLT, hcsplt.d32);
-+ FIQ_WRITE(st->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, hctsiz.d32);
-+ FIQ_WRITE(st->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32);
-+ return last;
-+}
-+
-+/**
-+ * fiq_fsm_tt_next_isoc() - queue next pending isochronous out start-split on a TT
-+ *
-+ * Despite the limitations of the DWC core, we can force a microframe pipeline of
-+ * isochronous OUT start-split transactions while waiting for a corresponding other-type
-+ * of endpoint to finish its CSPLITs. TTs have big periodic buffers therefore it
-+ * is very unlikely that filling the start-split FIFO will cause data loss.
-+ * This allows much better interleaving of transactions in an order-independent way-
-+ * there is no requirement to prioritise isochronous, just a state-space search has
-+ * to be performed on each periodic start-split complete interrupt.
-+ */
-+static int notrace fiq_fsm_tt_next_isoc(struct fiq_state *st, int num_channels, int n)
-+{
-+ int hub_addr = st->channel[n].hub_addr;
-+ int port_addr = st->channel[n].port_addr;
-+ int i, poked = 0;
-+ for (i = 0; i < num_channels; i++) {
-+ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH)
-+ continue;
-+ if (st->channel[i].hub_addr == hub_addr &&
-+ st->channel[i].port_addr == port_addr) {
-+ switch (st->channel[i].fsm) {
-+ case FIQ_PER_ISO_OUT_PENDING:
-+ if (st->channel[i].nrpackets == 1) {
-+ st->channel[i].fsm = FIQ_PER_ISO_OUT_LAST;
-+ } else {
-+ st->channel[i].fsm = FIQ_PER_ISO_OUT_ACTIVE;
-+ }
-+ fiq_fsm_restart_channel(st, i, 0);
-+ poked = 1;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ }
-+ if (poked)
-+ break;
-+ }
-+ return poked;
-+}
-+
-+/**
-+ * fiq_fsm_tt_in_use() - search for host channels using this TT
-+ * @n: Channel to use as reference
-+ *
-+ */
-+int notrace noinline fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n)
-+{
-+ int hub_addr = st->channel[n].hub_addr;
-+ int port_addr = st->channel[n].port_addr;
-+ int i, in_use = 0;
-+ for (i = 0; i < num_channels; i++) {
-+ if (i == n || st->channel[i].fsm == FIQ_PASSTHROUGH)
-+ continue;
-+ switch (st->channel[i].fsm) {
-+ /* TT is reserved for channels that are in the middle of a periodic
-+ * split transaction.
-+ */
-+ case FIQ_PER_SSPLIT_STARTED:
-+ case FIQ_PER_CSPLIT_WAIT:
-+ case FIQ_PER_CSPLIT_NYET1:
-+ //case FIQ_PER_CSPLIT_POLL:
-+ case FIQ_PER_ISO_OUT_ACTIVE:
-+ case FIQ_PER_ISO_OUT_LAST:
-+ if (st->channel[i].hub_addr == hub_addr &&
-+ st->channel[i].port_addr == port_addr) {
-+ in_use = 1;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+ if (in_use)
-+ break;
-+ }
-+ return in_use;
-+}
-+
-+/**
-+ * fiq_fsm_more_csplits() - determine whether additional CSPLITs need
-+ * to be issued for this IN transaction.
-+ *
-+ * We cannot tell the inbound PID of a data packet due to hardware limitations.
-+ * we need to make an educated guess as to whether we need to queue another CSPLIT
-+ * or not. A no-brainer is when we have received enough data to fill the endpoint
-+ * size, but for endpoints that give variable-length data then we have to resort
-+ * to heuristics.
-+ *
-+ * We also return whether this is the last CSPLIT to be queued, again based on
-+ * heuristics. This is to allow a 1-uframe overlap of periodic split transactions.
-+ * Note: requires at least 1 CSPLIT to have been performed prior to being called.
-+ */
-+
-+/*
-+ * We need some way of guaranteeing if a returned periodic packet of size X
-+ * has a DATA0 PID.
-+ * The heuristic value of 144 bytes assumes that the received data has maximal
-+ * bit-stuffing and the clock frequency of the transmitting device is at the lowest
-+ * permissible limit. If the transfer length results in a final packet size
-+ * 144 < p <= 188, then an erroneous CSPLIT will be issued.
-+ * Also used to ensure that an endpoint will nominally only return a single
-+ * complete-split worth of data.
-+ */
-+#define DATA0_PID_HEURISTIC 144
-+
-+static int notrace noinline fiq_fsm_more_csplits(struct fiq_state *state, int n, int *probably_last)
-+{
-+
-+ int i;
-+ int total_len = 0;
-+ int more_needed = 1;
-+ struct fiq_channel_state *st = &state->channel[n];
-+
-+ for (i = 0; i < st->dma_info.index; i++) {
-+ total_len += st->dma_info.slot_len[i];
-+ }
-+
-+ *probably_last = 0;
-+
-+ if (st->hcchar_copy.b.eptype == 0x3) {
-+ /*
-+ * An interrupt endpoint will take max 2 CSPLITs. if we are receiving data
-+ * then this is definitely the last CSPLIT.
-+ */
-+ *probably_last = 1;
-+ } else {
-+ /* Isoc IN. This is a bit risky if we are the first transaction:
-+ * we may have been held off slightly. */
-+ if (i > 1 && st->dma_info.slot_len[st->dma_info.index-1] <= DATA0_PID_HEURISTIC) {
-+ more_needed = 0;
-+ }
-+ /* If in the next uframe we will receive enough data to fill the endpoint,
-+ * then only issue 1 more csplit.
-+ */
-+ if (st->hctsiz_copy.b.xfersize - total_len <= DATA0_PID_HEURISTIC)
-+ *probably_last = 1;
-+ }
-+
-+ if (total_len >= st->hctsiz_copy.b.xfersize ||
-+ i == 6 || total_len == 0)
-+ /* Note: due to bit stuffing it is possible to have > 6 CSPLITs for
-+ * a single endpoint. Accepting more would completely break our scheduling mechanism though
-+ * - in these extreme cases we will pass through a truncated packet.
-+ */
-+ more_needed = 0;
-+
-+ return more_needed;
-+}
-+
-+/**
-+ * fiq_fsm_too_late() - Test transaction for lateness
-+ *
-+ * If a SSPLIT for a large IN transaction is issued too late in a frame,
-+ * the hub will disable the port to the device and respond with ERR handshakes.
-+ * The hub status endpoint will not reflect this change.
-+ * Returns 1 if we will issue a SSPLIT that will result in a device babble.
-+ */
-+int notrace fiq_fsm_too_late(struct fiq_state *st, int n)
-+{
-+ int uframe;
-+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) };
-+ uframe = hfnum.b.frnum & 0x7;
-+ if ((uframe < 6) && (st->channel[n].nrpackets + 1 + uframe > 7)) {
-+ return 1;
-+ } else {
-+ return 0;
-+ }
-+}
-+
-+
-+/**
-+ * fiq_fsm_start_next_periodic() - A half-arsed attempt at a microframe pipeline
-+ *
-+ * Search pending transactions in the start-split pending state and queue them.
-+ * Don't queue packets in uframe .5 (comes out in .6) (USB2.0 11.18.4).
-+ * Note: we specifically don't do isochronous OUT transactions first because better
-+ * use of the TT's start-split fifo can be achieved by pipelining an IN before an OUT.
-+ */
-+static void notrace noinline fiq_fsm_start_next_periodic(struct fiq_state *st, int num_channels)
-+{
-+ int n;
-+ hfnum_data_t hfnum = { .d32 = FIQ_READ(st->dwc_regs_base + HFNUM) };
-+ if ((hfnum.b.frnum & 0x7) == 5)
-+ return;
-+ for (n = 0; n < num_channels; n++) {
-+ if (st->channel[n].fsm == FIQ_PER_SSPLIT_QUEUED) {
-+ /* Check to see if any other transactions are using this TT */
-+ if(!fiq_fsm_tt_in_use(st, num_channels, n)) {
-+ if (!fiq_fsm_too_late(st, n)) {
-+ st->channel[n].fsm = FIQ_PER_SSPLIT_STARTED;
-+ fiq_print(FIQDBG_INT, st, "NEXTPER ");
-+ fiq_fsm_restart_channel(st, n, 0);
-+ } else {
-+ st->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT;
-+ }
-+ break;
-+ }
-+ }
-+ }
-+ for (n = 0; n < num_channels; n++) {
-+ if (st->channel[n].fsm == FIQ_PER_ISO_OUT_PENDING) {
-+ if (!fiq_fsm_tt_in_use(st, num_channels, n)) {
-+ fiq_print(FIQDBG_INT, st, "NEXTISO ");
-+ st->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE;
-+ fiq_fsm_restart_channel(st, n, 0);
-+ break;
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * fiq_fsm_update_hs_isoc() - update isochronous frame and transfer data
-+ * @state: Pointer to fiq_state
-+ * @n: Channel transaction is active on
-+ * @hcint: Copy of host channel interrupt register
-+ *
-+ * Returns 0 if there are no more transactions for this HC to do, 1
-+ * otherwise.
-+ */
-+static int notrace noinline fiq_fsm_update_hs_isoc(struct fiq_state *state, int n, hcint_data_t hcint)
-+{
-+ struct fiq_channel_state *st = &state->channel[n];
-+ int xfer_len = 0, nrpackets = 0;
-+ hcdma_data_t hcdma;
-+ fiq_print(FIQDBG_INT, state, "HSISO %02d", n);
-+
-+ xfer_len = fiq_get_xfer_len(state, n);
-+ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].actual_length = xfer_len;
-+
-+ st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].status = hcint.d32;
-+
-+ st->hs_isoc_info.index++;
-+ if (st->hs_isoc_info.index == st->hs_isoc_info.nrframes) {
-+ return 0;
-+ }
-+
-+ /* grab the next DMA address offset from the array */
-+ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].offset;
-+ FIQ_WRITE(state->dwc_regs_base + HC_DMA + (HC_OFFSET * n), hcdma.d32);
-+
-+ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as
-+ * the core needs to be told to send the correct number. Caution: for IN transfers,
-+ * this is always set to the maximum size of the endpoint. */
-+ xfer_len = st->hs_isoc_info.iso_desc[st->hs_isoc_info.index].length;
-+ /* Integer divide in a FIQ: fun. FIXME: make this not suck */
-+ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps;
-+ if (nrpackets == 0)
-+ nrpackets = 1;
-+ st->hcchar_copy.b.multicnt = nrpackets;
-+ st->hctsiz_copy.b.pktcnt = nrpackets;
-+
-+ /* Initial PID also needs to be set */
-+ if (st->hcchar_copy.b.epdir == 0) {
-+ st->hctsiz_copy.b.xfersize = xfer_len;
-+ switch (st->hcchar_copy.b.multicnt) {
-+ case 1:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA0;
-+ break;
-+ case 2:
-+ case 3:
-+ st->hctsiz_copy.b.pid = DWC_PID_MDATA;
-+ break;
-+ }
-+
-+ } else {
-+ switch (st->hcchar_copy.b.multicnt) {
-+ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps;
-+ case 1:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA0;
-+ break;
-+ case 2:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA1;
-+ break;
-+ case 3:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA2;
-+ break;
-+ }
-+ }
-+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCTSIZ, st->hctsiz_copy.d32);
-+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR, st->hcchar_copy.d32);
-+ /* Channel is enabled on hcint handler exit */
-+ fiq_print(FIQDBG_INT, state, "HSISOOUT");
-+ return 1;
-+}
-+
-+
-+/**
-+ * fiq_fsm_do_sof() - FSM start-of-frame interrupt handler
-+ * @state: Pointer to the state struct passed from banked FIQ mode registers.
-+ * @num_channels: set according to the DWC hardware configuration
-+ *
-+ * The SOF handler in FSM mode has two functions
-+ * 1. Hold off SOF from causing schedule advancement in IRQ context if there's
-+ * nothing to do
-+ * 2. Advance certain FSM states that require either a microframe delay, or a microframe
-+ * of holdoff.
-+ *
-+ * The second part is architecture-specific to mach-bcm2835 -
-+ * a sane interrupt controller would have a mask register for ARM interrupt sources
-+ * to be promoted to the nFIQ line, but it doesn't. Instead a single interrupt
-+ * number (USB) can be enabled. This means that certain parts of the USB specification
-+ * that require "wait a little while, then issue another packet" cannot be fulfilled with
-+ * the timing granularity required to achieve optimal throughout. The workaround is to use
-+ * the SOF "timer" (125uS) to perform this task.
-+ */
-+static int notrace noinline fiq_fsm_do_sof(struct fiq_state *state, int num_channels)
-+{
-+ hfnum_data_t hfnum = { .d32 = FIQ_READ(state->dwc_regs_base + HFNUM) };
-+ int n;
-+ int kick_irq = 0;
-+
-+ if ((hfnum.b.frnum & 0x7) == 1) {
-+ /* We cannot issue csplits for transactions in the last frame past (n+1).1
-+ * Check to see if there are any transactions that are stale.
-+ * Boot them out.
-+ */
-+ for (n = 0; n < num_channels; n++) {
-+ switch (state->channel[n].fsm) {
-+ case FIQ_PER_CSPLIT_WAIT:
-+ case FIQ_PER_CSPLIT_NYET1:
-+ case FIQ_PER_CSPLIT_POLL:
-+ case FIQ_PER_CSPLIT_LAST:
-+ /* Check if we are no longer in the same full-speed frame. */
-+ if (((state->channel[n].expected_uframe & 0x3FFF) & ~0x7) <
-+ (hfnum.b.frnum & ~0x7))
-+ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT;
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+ }
-+
-+ for (n = 0; n < num_channels; n++) {
-+ switch (state->channel[n].fsm) {
-+
-+ case FIQ_NP_SSPLIT_RETRY:
-+ case FIQ_NP_IN_CSPLIT_RETRY:
-+ case FIQ_NP_OUT_CSPLIT_RETRY:
-+ fiq_fsm_restart_channel(state, n, 0);
-+ break;
-+
-+ case FIQ_HS_ISOC_SLEEPING:
-+ /* Is it time to wake this channel yet? */
-+ if (--state->channel[n].uframe_sleeps == 0) {
-+ state->channel[n].fsm = FIQ_HS_ISOC_TURBO;
-+ fiq_fsm_restart_channel(state, n, 0);
-+ }
-+ break;
-+
-+ case FIQ_PER_SSPLIT_QUEUED:
-+ if ((hfnum.b.frnum & 0x7) == 5)
-+ break;
-+ if(!fiq_fsm_tt_in_use(state, num_channels, n)) {
-+ if (!fiq_fsm_too_late(state, n)) {
-+ fiq_print(FIQDBG_INT, state, "SOF GO %01d", n);
-+ fiq_fsm_restart_channel(state, n, 0);
-+ state->channel[n].fsm = FIQ_PER_SSPLIT_STARTED;
-+ } else {
-+ /* Transaction cannot be started without risking a device babble error */
-+ state->channel[n].fsm = FIQ_PER_SPLIT_TIMEOUT;
-+ state->haintmsk_saved.b2.chint &= ~(1 << n);
-+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0);
-+ kick_irq |= 1;
-+ }
-+ }
-+ break;
-+
-+ case FIQ_PER_ISO_OUT_PENDING:
-+ /* Ordinarily, this should be poked after the SSPLIT
-+ * complete interrupt for a competing transfer on the same
-+ * TT. Doesn't happen for aborted transactions though.
-+ */
-+ if ((hfnum.b.frnum & 0x7) >= 5)
-+ break;
-+ if (!fiq_fsm_tt_in_use(state, num_channels, n)) {
-+ /* Hardware bug. SOF can sometimes occur after the channel halt interrupt
-+ * that caused this.
-+ */
-+ fiq_fsm_restart_channel(state, n, 0);
-+ fiq_print(FIQDBG_INT, state, "SOF ISOC");
-+ if (state->channel[n].nrpackets == 1) {
-+ state->channel[n].fsm = FIQ_PER_ISO_OUT_LAST;
-+ } else {
-+ state->channel[n].fsm = FIQ_PER_ISO_OUT_ACTIVE;
-+ }
-+ }
-+ break;
-+
-+ case FIQ_PER_CSPLIT_WAIT:
-+ /* we are guaranteed to be in this state if and only if the SSPLIT interrupt
-+ * occurred when the bus transaction occurred. The SOF interrupt reversal bug
-+ * will utterly bugger this up though.
-+ */
-+ if (hfnum.b.frnum != state->channel[n].expected_uframe) {
-+ fiq_print(FIQDBG_INT, state, "SOFCS %d ", n);
-+ state->channel[n].fsm = FIQ_PER_CSPLIT_POLL;
-+ fiq_fsm_restart_channel(state, n, 0);
-+ fiq_fsm_start_next_periodic(state, num_channels);
-+
-+ }
-+ break;
-+
-+ case FIQ_PER_SPLIT_TIMEOUT:
-+ case FIQ_DEQUEUE_ISSUED:
-+ /* Ugly: we have to force a HCD interrupt.
-+ * Poke the mask for the channel in question.
-+ * We will take a fake SOF because of this, but
-+ * that's OK.
-+ */
-+ state->haintmsk_saved.b2.chint &= ~(1 << n);
-+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, 0);
-+ kick_irq |= 1;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+ }
-+
-+ if (state->kick_np_queues ||
-+ dwc_frame_num_le(state->next_sched_frame, hfnum.b.frnum))
-+ kick_irq |= 1;
-+
-+ return !kick_irq;
-+}
-+
-+
-+/**
-+ * fiq_fsm_do_hcintr() - FSM host channel interrupt handler
-+ * @state: Pointer to the FIQ state struct
-+ * @num_channels: Number of channels as per hardware config
-+ * @n: channel for which HAINT(i) was raised
-+ *
-+ * An important property is that only the CHHLT interrupt is unmasked. Unfortunately, AHBerr is as well.
-+ */
-+static int notrace noinline fiq_fsm_do_hcintr(struct fiq_state *state, int num_channels, int n)
-+{
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hcint_data_t hcint_probe;
-+ hcchar_data_t hcchar;
-+ int handled = 0;
-+ int restart = 0;
-+ int last_csplit = 0;
-+ int start_next_periodic = 0;
-+ struct fiq_channel_state *st = &state->channel[n];
-+ hfnum_data_t hfnum;
-+
-+ hcint.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT);
-+ hcintmsk.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK);
-+ hcint_probe.d32 = hcint.d32 & hcintmsk.d32;
-+
-+ if (st->fsm != FIQ_PASSTHROUGH) {
-+ fiq_print(FIQDBG_INT, state, "HC%01d ST%02d", n, st->fsm);
-+ fiq_print(FIQDBG_INT, state, "%08x", hcint.d32);
-+ }
-+
-+ switch (st->fsm) {
-+
-+ case FIQ_PASSTHROUGH:
-+ case FIQ_DEQUEUE_ISSUED:
-+ /* doesn't belong to us, kick it upstairs */
-+ break;
-+
-+ case FIQ_PASSTHROUGH_ERRORSTATE:
-+ /* We are here to emulate the error recovery mechanism of the dwc HCD.
-+ * Several interrupts are unmasked if a previous transaction failed - it's
-+ * death for the FIQ to attempt to handle them as the channel isn't halted.
-+ * Emulate what the HCD does in this situation: mask and continue.
-+ * The FSM has no other state setup so this has to be handled out-of-band.
-+ */
-+ fiq_print(FIQDBG_ERR, state, "ERRST %02d", n);
-+ if (hcint_probe.b.nak || hcint_probe.b.ack || hcint_probe.b.datatglerr) {
-+ fiq_print(FIQDBG_ERR, state, "RESET %02d", n);
-+ /* In some random cases we can get a NAK interrupt coincident with a Xacterr
-+ * interrupt, after the device has disappeared.
-+ */
-+ if (!hcint.b.xacterr)
-+ st->nr_errors = 0;
-+ hcintmsk.b.nak = 0;
-+ hcintmsk.b.ack = 0;
-+ hcintmsk.b.datatglerr = 0;
-+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINTMSK, hcintmsk.d32);
-+ return 1;
-+ }
-+ if (hcint_probe.b.chhltd) {
-+ fiq_print(FIQDBG_ERR, state, "CHHLT %02d", n);
-+ fiq_print(FIQDBG_ERR, state, "%08x", hcint.d32);
-+ return 0;
-+ }
-+ break;
-+
-+ /* Non-periodic state groups */
-+ case FIQ_NP_SSPLIT_STARTED:
-+ case FIQ_NP_SSPLIT_RETRY:
-+ /* Got a HCINT for a NP SSPLIT. Expected ACK / NAK / fail */
-+ if (hcint.b.ack) {
-+ /* SSPLIT complete. For OUT, the data has been sent. For IN, the LS transaction
-+ * will start shortly. SOF needs to kick the transaction to prevent a NYET flood.
-+ */
-+ if(st->hcchar_copy.b.epdir == 1)
-+ st->fsm = FIQ_NP_IN_CSPLIT_RETRY;
-+ else
-+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY;
-+ st->nr_errors = 0;
-+ handled = 1;
-+ fiq_fsm_setup_csplit(state, n);
-+ } else if (hcint.b.nak) {
-+ // No buffer space in TT. Retry on a uframe boundary.
-+ st->fsm = FIQ_NP_SSPLIT_RETRY;
-+ handled = 1;
-+ } else if (hcint.b.xacterr) {
-+ // The only other one we care about is xacterr. This implies HS bus error - retry.
-+ st->nr_errors++;
-+ st->fsm = FIQ_NP_SSPLIT_RETRY;
-+ if (st->nr_errors >= 3) {
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ } else {
-+ handled = 1;
-+ restart = 1;
-+ }
-+ } else {
-+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
-+ handled = 0;
-+ restart = 0;
-+ }
-+ break;
-+
-+ case FIQ_NP_IN_CSPLIT_RETRY:
-+ /* Received a CSPLIT done interrupt.
-+ * Expected Data/NAK/STALL/NYET for IN.
-+ */
-+ if (hcint.b.xfercomp) {
-+ /* For IN, data is present. */
-+ st->fsm = FIQ_NP_SPLIT_DONE;
-+ } else if (hcint.b.nak) {
-+ /* no endpoint data. Punt it upstairs */
-+ st->fsm = FIQ_NP_SPLIT_DONE;
-+ } else if (hcint.b.nyet) {
-+ /* CSPLIT NYET - retry on a uframe boundary. */
-+ handled = 1;
-+ st->nr_errors = 0;
-+ } else if (hcint.b.datatglerr) {
-+ /* data toggle errors do not set the xfercomp bit. */
-+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
-+ } else if (hcint.b.xacterr) {
-+ /* HS error. Retry immediate */
-+ st->fsm = FIQ_NP_IN_CSPLIT_RETRY;
-+ st->nr_errors++;
-+ if (st->nr_errors >= 3) {
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ } else {
-+ handled = 1;
-+ restart = 1;
-+ }
-+ } else if (hcint.b.stall || hcint.b.bblerr) {
-+ /* A STALL implies either a LS bus error or a genuine STALL. */
-+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
-+ } else {
-+ /* Hardware bug. It's possible in some cases to
-+ * get a channel halt with nothing else set when
-+ * the response was a NYET. Treat as local 3-strikes retry.
-+ */
-+ hcint_data_t hcint_test = hcint;
-+ hcint_test.b.chhltd = 0;
-+ if (!hcint_test.d32) {
-+ st->nr_errors++;
-+ if (st->nr_errors >= 3) {
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ } else {
-+ handled = 1;
-+ }
-+ } else {
-+ /* Bail out if something unexpected happened */
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ }
-+ }
-+ break;
-+
-+ case FIQ_NP_OUT_CSPLIT_RETRY:
-+ /* Received a CSPLIT done interrupt.
-+ * Expected ACK/NAK/STALL/NYET/XFERCOMP for OUT.*/
-+ if (hcint.b.xfercomp) {
-+ st->fsm = FIQ_NP_SPLIT_DONE;
-+ } else if (hcint.b.nak) {
-+ // The HCD will implement the holdoff on frame boundaries.
-+ st->fsm = FIQ_NP_SPLIT_DONE;
-+ } else if (hcint.b.nyet) {
-+ // Hub still processing.
-+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY;
-+ handled = 1;
-+ st->nr_errors = 0;
-+ //restart = 1;
-+ } else if (hcint.b.xacterr) {
-+ /* HS error. retry immediate */
-+ st->fsm = FIQ_NP_OUT_CSPLIT_RETRY;
-+ st->nr_errors++;
-+ if (st->nr_errors >= 3) {
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ } else {
-+ handled = 1;
-+ restart = 1;
-+ }
-+ } else if (hcint.b.stall) {
-+ /* LS bus error or genuine stall */
-+ st->fsm = FIQ_NP_SPLIT_LS_ABORTED;
-+ } else {
-+ /*
-+ * Hardware bug. It's possible in some cases to get a
-+ * channel halt with nothing else set when the response was a NYET.
-+ * Treat as local 3-strikes retry.
-+ */
-+ hcint_data_t hcint_test = hcint;
-+ hcint_test.b.chhltd = 0;
-+ if (!hcint_test.d32) {
-+ st->nr_errors++;
-+ if (st->nr_errors >= 3) {
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ } else {
-+ handled = 1;
-+ }
-+ } else {
-+ // Something unexpected happened. AHBerror or babble perhaps. Let the IRQ deal with it.
-+ st->fsm = FIQ_NP_SPLIT_HS_ABORTED;
-+ }
-+ }
-+ break;
-+
-+ /* Periodic split states (except isoc out) */
-+ case FIQ_PER_SSPLIT_STARTED:
-+ /* Expect an ACK or failure for SSPLIT */
-+ if (hcint.b.ack) {
-+ /*
-+ * SSPLIT transfer complete interrupt - the generation of this interrupt is fraught with bugs.
-+ * For a packet queued in microframe n-3 to appear in n-2, if the channel is enabled near the EOF1
-+ * point for microframe n-3, the packet will not appear on the bus until microframe n.
-+ * Additionally, the generation of the actual interrupt is dodgy. For a packet appearing on the bus
-+ * in microframe n, sometimes the interrupt is generated immediately. Sometimes, it appears in n+1
-+ * coincident with SOF for n+1.
-+ * SOF is also buggy. It can sometimes be raised AFTER the first bus transaction has taken place.
-+ * These appear to be caused by timing/clock crossing bugs within the core itself.
-+ * State machine workaround.
-+ */
-+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
-+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
-+ fiq_fsm_setup_csplit(state, n);
-+ /* Poke the oddfrm bit. If we are equivalent, we received the interrupt at the correct
-+ * time. If not, then we're in the next SOF.
-+ */
-+ if ((hfnum.b.frnum & 0x1) == hcchar.b.oddfrm) {
-+ fiq_print(FIQDBG_INT, state, "CSWAIT %01d", n);
-+ st->expected_uframe = hfnum.b.frnum;
-+ st->fsm = FIQ_PER_CSPLIT_WAIT;
-+ } else {
-+ fiq_print(FIQDBG_INT, state, "CSPOL %01d", n);
-+ /* For isochronous IN endpoints,
-+ * we need to hold off if we are expecting a lot of data */
-+ if (st->hcchar_copy.b.mps < DATA0_PID_HEURISTIC) {
-+ start_next_periodic = 1;
-+ }
-+ /* Danger will robinson: we are in a broken state. If our first interrupt after
-+ * this is a NYET, it will be delayed by 1 uframe and result in an unrecoverable
-+ * lag. Unmask the NYET interrupt.
-+ */
-+ st->expected_uframe = (hfnum.b.frnum + 1) & 0x3FFF;
-+ st->fsm = FIQ_PER_CSPLIT_BROKEN_NYET1;
-+ restart = 1;
-+ }
-+ handled = 1;
-+ } else if (hcint.b.xacterr) {
-+ /* 3-strikes retry is enabled, we have hit our max nr_errors */
-+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
-+ start_next_periodic = 1;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
-+ start_next_periodic = 1;
-+ }
-+ /* We can now queue the next isochronous OUT transaction, if one is pending. */
-+ if(fiq_fsm_tt_next_isoc(state, num_channels, n)) {
-+ fiq_print(FIQDBG_INT, state, "NEXTISO ");
-+ }
-+ break;
-+
-+ case FIQ_PER_CSPLIT_NYET1:
-+ /* First CSPLIT attempt was a NYET. If we get a subsequent NYET,
-+ * we are too late and the TT has dropped its CSPLIT fifo.
-+ */
-+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
-+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
-+ start_next_periodic = 1;
-+ if (hcint.b.nak) {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ } else if (hcint.b.xfercomp) {
-+ fiq_increment_dma_buf(state, num_channels, n);
-+ st->fsm = FIQ_PER_CSPLIT_POLL;
-+ st->nr_errors = 0;
-+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) {
-+ handled = 1;
-+ restart = 1;
-+ if (!last_csplit)
-+ start_next_periodic = 0;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ }
-+ } else if (hcint.b.nyet) {
-+ /* Doh. Data lost. */
-+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED;
-+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) {
-+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
-+ }
-+ break;
-+
-+ case FIQ_PER_CSPLIT_BROKEN_NYET1:
-+ /*
-+ * we got here because our host channel is in the delayed-interrupt
-+ * state and we cannot take a NYET interrupt any later than when it
-+ * occurred. Disable then re-enable the channel if this happens to force
-+ * CSPLITs to occur at the right time.
-+ */
-+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
-+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
-+ fiq_print(FIQDBG_INT, state, "BROK: %01d ", n);
-+ if (hcint.b.nak) {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ start_next_periodic = 1;
-+ } else if (hcint.b.xfercomp) {
-+ fiq_increment_dma_buf(state, num_channels, n);
-+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) {
-+ st->fsm = FIQ_PER_CSPLIT_POLL;
-+ handled = 1;
-+ restart = 1;
-+ start_next_periodic = 1;
-+ /* Reload HCTSIZ for the next transfer */
-+ fiq_fsm_reload_hctsiz(state, n);
-+ if (!last_csplit)
-+ start_next_periodic = 0;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ }
-+ } else if (hcint.b.nyet) {
-+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED;
-+ start_next_periodic = 1;
-+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) {
-+ /* Local 3-strikes retry is handled by the core. This is a ERR response.*/
-+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
-+ }
-+ break;
-+
-+ case FIQ_PER_CSPLIT_POLL:
-+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
-+ hcchar.d32 = FIQ_READ(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCCHAR);
-+ start_next_periodic = 1;
-+ if (hcint.b.nak) {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ } else if (hcint.b.xfercomp) {
-+ fiq_increment_dma_buf(state, num_channels, n);
-+ if (fiq_fsm_more_csplits(state, n, &last_csplit)) {
-+ handled = 1;
-+ restart = 1;
-+ /* Reload HCTSIZ for the next transfer */
-+ fiq_fsm_reload_hctsiz(state, n);
-+ if (!last_csplit)
-+ start_next_periodic = 0;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ }
-+ } else if (hcint.b.nyet) {
-+ /* Are we a NYET after the first data packet? */
-+ if (st->nrpackets == 0) {
-+ st->fsm = FIQ_PER_CSPLIT_NYET1;
-+ handled = 1;
-+ restart = 1;
-+ } else {
-+ /* We got a NYET when polling CSPLITs. Can happen
-+ * if our heuristic fails, or if someone disables us
-+ * for any significant length of time.
-+ */
-+ if (st->nr_errors >= 3) {
-+ st->fsm = FIQ_PER_SPLIT_NYET_ABORTED;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_DONE;
-+ }
-+ }
-+ } else if (hcint.b.xacterr || hcint.b.stall || hcint.b.bblerr) {
-+ /* For xacterr, Local 3-strikes retry is handled by the core. This is a ERR response.*/
-+ st->fsm = FIQ_PER_SPLIT_LS_ABORTED;
-+ } else {
-+ st->fsm = FIQ_PER_SPLIT_HS_ABORTED;
-+ }
-+ break;
-+
-+ case FIQ_HS_ISOC_TURBO:
-+ if (fiq_fsm_update_hs_isoc(state, n, hcint)) {
-+ /* more transactions to come */
-+ handled = 1;
-+ fiq_print(FIQDBG_INT, state, "HSISO M ");
-+ /* For strided transfers, put ourselves to sleep */
-+ if (st->hs_isoc_info.stride > 1) {
-+ st->uframe_sleeps = st->hs_isoc_info.stride - 1;
-+ st->fsm = FIQ_HS_ISOC_SLEEPING;
-+ } else {
-+ restart = 1;
-+ }
-+ } else {
-+ st->fsm = FIQ_HS_ISOC_DONE;
-+ fiq_print(FIQDBG_INT, state, "HSISO F ");
-+ }
-+ break;
-+
-+ case FIQ_HS_ISOC_ABORTED:
-+ /* This abort is called by the driver rewriting the state mid-transaction
-+ * which allows the dequeue mechanism to work more effectively.
-+ */
-+ break;
-+
-+ case FIQ_PER_ISO_OUT_ACTIVE:
-+ if (hcint.b.ack) {
-+ if(fiq_iso_out_advance(state, num_channels, n)) {
-+ /* last OUT transfer */
-+ st->fsm = FIQ_PER_ISO_OUT_LAST;
-+ /*
-+ * Assuming the periodic FIFO in the dwc core
-+ * actually does its job properly, we can queue
-+ * the next ssplit now and in theory, the wire
-+ * transactions will be in-order.
-+ */
-+ // No it doesn't. It appears to process requests in host channel order.
-+ //start_next_periodic = 1;
-+ }
-+ handled = 1;
-+ restart = 1;
-+ } else {
-+ /*
-+ * Isochronous transactions carry on regardless. Log the error
-+ * and continue.
-+ */
-+ //explode += 1;
-+ st->nr_errors++;
-+ if(fiq_iso_out_advance(state, num_channels, n)) {
-+ st->fsm = FIQ_PER_ISO_OUT_LAST;
-+ //start_next_periodic = 1;
-+ }
-+ handled = 1;
-+ restart = 1;
-+ }
-+ break;
-+
-+ case FIQ_PER_ISO_OUT_LAST:
-+ if (hcint.b.ack) {
-+ /* All done here */
-+ st->fsm = FIQ_PER_ISO_OUT_DONE;
-+ } else {
-+ st->fsm = FIQ_PER_ISO_OUT_DONE;
-+ st->nr_errors++;
-+ }
-+ start_next_periodic = 1;
-+ break;
-+
-+ case FIQ_PER_SPLIT_TIMEOUT:
-+ /* SOF kicked us because we overran. */
-+ start_next_periodic = 1;
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ if (handled) {
-+ FIQ_WRITE(state->dwc_regs_base + HC_START + (HC_OFFSET * n) + HCINT, hcint.d32);
-+ } else {
-+ /* Copy the regs into the state so the IRQ knows what to do */
-+ st->hcint_copy.d32 = hcint.d32;
-+ }
-+
-+ if (restart) {
-+ /* Restart always implies handled. */
-+ if (restart == 2) {
-+ /* For complete-split INs, the show must go on.
-+ * Force a channel restart */
-+ fiq_fsm_restart_channel(state, n, 1);
-+ } else {
-+ fiq_fsm_restart_channel(state, n, 0);
-+ }
-+ }
-+ if (start_next_periodic) {
-+ fiq_fsm_start_next_periodic(state, num_channels);
-+ }
-+ if (st->fsm != FIQ_PASSTHROUGH)
-+ fiq_print(FIQDBG_INT, state, "FSMOUT%02d", st->fsm);
-+
-+ return handled;
-+}
-+
-+
-+/**
-+ * dwc_otg_fiq_fsm() - Flying State Machine (monster) FIQ
-+ * @state: pointer to state struct passed from the banked FIQ mode registers.
-+ * @num_channels: set according to the DWC hardware configuration
-+ * @dma: pointer to DMA bounce buffers for split transaction slots
-+ *
-+ * The FSM FIQ performs the low-level tasks that normally would be performed by the microcode
-+ * inside an EHCI or similar host controller regarding split transactions. The DWC core
-+ * interrupts each and every time a split transaction packet is received or sent successfully.
-+ * This results in either an interrupt storm when everything is working "properly", or
-+ * the interrupt latency of the system in general breaks time-sensitive periodic split
-+ * transactions. Pushing the low-level, but relatively easy state machine work into the FIQ
-+ * solves these problems.
-+ *
-+ * Return: void
-+ */
-+void notrace dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels)
-+{
-+ gintsts_data_t gintsts, gintsts_handled;
-+ gintmsk_data_t gintmsk;
-+ //hfnum_data_t hfnum;
-+ haint_data_t haint, haint_handled;
-+ haintmsk_data_t haintmsk;
-+ int kick_irq = 0;
-+
-+ gintsts_handled.d32 = 0;
-+ haint_handled.d32 = 0;
-+
-+ fiq_fsm_spin_lock(&state->lock);
-+ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS);
-+ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK);
-+ gintsts.d32 &= gintmsk.d32;
-+
-+ if (gintsts.b.sofintr) {
-+ /* For FSM mode, SOF is required to keep the state machine advance for
-+ * certain stages of the periodic pipeline. It's death to mask this
-+ * interrupt in that case.
-+ */
-+
-+ if (!fiq_fsm_do_sof(state, num_channels)) {
-+ /* Kick IRQ once. Queue advancement means that all pending transactions
-+ * will get serviced when the IRQ finally executes.
-+ */
-+ if (state->gintmsk_saved.b.sofintr == 1)
-+ kick_irq |= 1;
-+ state->gintmsk_saved.b.sofintr = 0;
-+ }
-+ gintsts_handled.b.sofintr = 1;
-+ }
-+
-+ if (gintsts.b.hcintr) {
-+ int i;
-+ haint.d32 = FIQ_READ(state->dwc_regs_base + HAINT);
-+ haintmsk.d32 = FIQ_READ(state->dwc_regs_base + HAINTMSK);
-+ haint.d32 &= haintmsk.d32;
-+ haint_handled.d32 = 0;
-+ for (i=0; i<num_channels; i++) {
-+ if (haint.b2.chint & (1 << i)) {
-+ if(!fiq_fsm_do_hcintr(state, num_channels, i)) {
-+ /* HCINT was not handled in FIQ
-+ * HAINT is level-sensitive, leading to level-sensitive ginststs.b.hcint bit.
-+ * Mask HAINT(i) but keep top-level hcint unmasked.
-+ */
-+ state->haintmsk_saved.b2.chint &= ~(1 << i);
-+ } else {
-+ /* do_hcintr cleaned up after itself, but clear haint */
-+ haint_handled.b2.chint |= (1 << i);
-+ }
-+ }
-+ }
-+
-+ if (haint_handled.b2.chint) {
-+ FIQ_WRITE(state->dwc_regs_base + HAINT, haint_handled.d32);
-+ }
-+
-+ if (haintmsk.d32 != (haintmsk.d32 & state->haintmsk_saved.d32)) {
-+ /*
-+ * This is necessary to avoid multiple retriggers of the MPHI in the case
-+ * where interrupts are held off and HCINTs start to pile up.
-+ * Only wake up the IRQ if a new interrupt came in, was not handled and was
-+ * masked.
-+ */
-+ haintmsk.d32 &= state->haintmsk_saved.d32;
-+ FIQ_WRITE(state->dwc_regs_base + HAINTMSK, haintmsk.d32);
-+ kick_irq |= 1;
-+ }
-+ /* Top-Level interrupt - always handled because it's level-sensitive */
-+ gintsts_handled.b.hcintr = 1;
-+ }
-+
-+
-+ /* Clear the bits in the saved register that were not handled but were triggered. */
-+ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32);
-+
-+ /* FIQ didn't handle something - mask has changed - write new mask */
-+ if (gintmsk.d32 != (gintmsk.d32 & state->gintmsk_saved.d32)) {
-+ gintmsk.d32 &= state->gintmsk_saved.d32;
-+ gintmsk.b.sofintr = 1;
-+ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32);
-+// fiq_print(FIQDBG_INT, state, "KICKGINT");
-+// fiq_print(FIQDBG_INT, state, "%08x", gintmsk.d32);
-+// fiq_print(FIQDBG_INT, state, "%08x", state->gintmsk_saved.d32);
-+ kick_irq |= 1;
-+ }
-+
-+ if (gintsts_handled.d32) {
-+ /* Only applies to edge-sensitive bits in GINTSTS */
-+ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32);
-+ }
-+
-+ /* We got an interrupt, didn't handle it. */
-+ if (kick_irq) {
-+ state->mphi_int_count++;
-+ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send);
-+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29));
-+
-+ }
-+ state->fiq_done++;
-+ mb();
-+ fiq_fsm_spin_unlock(&state->lock);
-+}
-+
-+
-+/**
-+ * dwc_otg_fiq_nop() - FIQ "lite"
-+ * @state: pointer to state struct passed from the banked FIQ mode registers.
-+ *
-+ * The "nop" handler does not intervene on any interrupts other than SOF.
-+ * It is limited in scope to deciding at each SOF if the IRQ SOF handler (which deals
-+ * with non-periodic/periodic queues) needs to be kicked.
-+ *
-+ * This is done to hold off the SOF interrupt, which occurs at a rate of 8000 per second.
-+ *
-+ * Return: void
-+ */
-+void notrace dwc_otg_fiq_nop(struct fiq_state *state)
-+{
-+ gintsts_data_t gintsts, gintsts_handled;
-+ gintmsk_data_t gintmsk;
-+ hfnum_data_t hfnum;
-+
-+ fiq_fsm_spin_lock(&state->lock);
-+ hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM);
-+ gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS);
-+ gintmsk.d32 = FIQ_READ(state->dwc_regs_base + GINTMSK);
-+ gintsts.d32 &= gintmsk.d32;
-+ gintsts_handled.d32 = 0;
-+
-+ if (gintsts.b.sofintr) {
-+ if (!state->kick_np_queues &&
-+ dwc_frame_num_gt(state->next_sched_frame, hfnum.b.frnum)) {
-+ /* SOF handled, no work to do, just ACK interrupt */
-+ gintsts_handled.b.sofintr = 1;
-+ } else {
-+ /* Kick IRQ */
-+ state->gintmsk_saved.b.sofintr = 0;
-+ }
-+ }
-+
-+ /* Reset handled interrupts */
-+ if(gintsts_handled.d32) {
-+ FIQ_WRITE(state->dwc_regs_base + GINTSTS, gintsts_handled.d32);
-+ }
-+
-+ /* Clear the bits in the saved register that were not handled but were triggered. */
-+ state->gintmsk_saved.d32 &= ~(gintsts.d32 & ~gintsts_handled.d32);
-+
-+ /* We got an interrupt, didn't handle it and want to mask it */
-+ if (~(state->gintmsk_saved.d32)) {
-+ state->mphi_int_count++;
-+ gintmsk.d32 &= state->gintmsk_saved.d32;
-+ FIQ_WRITE(state->dwc_regs_base + GINTMSK, gintmsk.d32);
-+ /* Force a clear before another dummy send */
-+ FIQ_WRITE(state->mphi_regs.intstat, (1<<29));
-+ FIQ_WRITE(state->mphi_regs.outdda, (int) state->dummy_send);
-+ FIQ_WRITE(state->mphi_regs.outddb, (1<<29));
-+
-+ }
-+ state->fiq_done++;
-+ mb();
-+ fiq_fsm_spin_unlock(&state->lock);
-+}
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.h
-@@ -0,0 +1,370 @@
-+/*
-+ * dwc_otg_fiq_fsm.h - Finite state machine FIQ header definitions
-+ *
-+ * Copyright (c) 2013 Raspberry Pi Foundation
-+ *
-+ * Author: Jonathan Bell <jonathan@raspberrypi.org>
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of Raspberry Pi nor the
-+ * names of its contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ * This FIQ implements functionality that performs split transactions on
-+ * the dwc_otg hardware without any outside intervention. A split transaction
-+ * is "queued" by nominating a specific host channel to perform the entirety
-+ * of a split transaction. This FIQ will then perform the microframe-precise
-+ * scheduling required in each phase of the transaction until completion.
-+ *
-+ * The FIQ functionality has been surgically implanted into the Synopsys
-+ * vendor-provided driver.
-+ *
-+ */
-+
-+#ifndef DWC_OTG_FIQ_FSM_H_
-+#define DWC_OTG_FIQ_FSM_H_
-+
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_hcd.h"
-+#include <linux/kernel.h>
-+#include <linux/irqflags.h>
-+#include <linux/string.h>
-+#include <asm/barrier.h>
-+
-+#if 0
-+#define FLAME_ON(x) \
-+do { \
-+ int gpioreg; \
-+ \
-+ gpioreg = readl(__io_address(0x20200000+0x8)); \
-+ gpioreg &= ~(7 << (x-20)*3); \
-+ gpioreg |= 0x1 << (x-20)*3; \
-+ writel(gpioreg, __io_address(0x20200000+0x8)); \
-+ \
-+ writel(1<<x, __io_address(0x20200000+(0x1C))); \
-+} while (0)
-+
-+#define FLAME_OFF(x) \
-+do { \
-+ writel(1<<x, __io_address(0x20200000+(0x28))); \
-+} while (0)
-+#else
-+#define FLAME_ON(x) do { } while (0)
-+#define FLAME_OFF(X) do { } while (0)
-+#endif
-+
-+/* This is a quick-and-dirty arch-specific register read/write. We know that
-+ * writes to a peripheral on BCM2835 will always arrive in-order, also that
-+ * reads and writes are executed in-order therefore the need for memory barriers
-+ * is obviated if we're only talking to USB.
-+ */
-+#define FIQ_WRITE(_addr_,_data_) (*(volatile unsigned int *) (_addr_) = (_data_))
-+#define FIQ_READ(_addr_) (*(volatile unsigned int *) (_addr_))
-+
-+/* FIQ-ified register definitions. Offsets are from dwc_regs_base. */
-+#define GINTSTS 0x014
-+#define GINTMSK 0x018
-+/* Debug register. Poll the top of the received packets FIFO. */
-+#define GRXSTSR 0x01C
-+#define HFNUM 0x408
-+#define HAINT 0x414
-+#define HAINTMSK 0x418
-+#define HPRT0 0x440
-+
-+/* HC_regs start from an offset of 0x500 */
-+#define HC_START 0x500
-+#define HC_OFFSET 0x020
-+
-+#define HC_DMA 0x514
-+
-+#define HCCHAR 0x00
-+#define HCSPLT 0x04
-+#define HCINT 0x08
-+#define HCINTMSK 0x0C
-+#define HCTSIZ 0x10
-+
-+#define ISOC_XACTPOS_ALL 0b11
-+#define ISOC_XACTPOS_BEGIN 0b10
-+#define ISOC_XACTPOS_MID 0b00
-+#define ISOC_XACTPOS_END 0b01
-+
-+#define DWC_PID_DATA2 0b01
-+#define DWC_PID_MDATA 0b11
-+#define DWC_PID_DATA1 0b10
-+#define DWC_PID_DATA0 0b00
-+
-+typedef struct {
-+ volatile void* base;
-+ volatile void* ctrl;
-+ volatile void* outdda;
-+ volatile void* outddb;
-+ volatile void* intstat;
-+} mphi_regs_t;
-+
-+enum fiq_debug_level {
-+ FIQDBG_SCHED = (1 << 0),
-+ FIQDBG_INT = (1 << 1),
-+ FIQDBG_ERR = (1 << 2),
-+ FIQDBG_PORTHUB = (1 << 3),
-+};
-+
-+typedef struct {
-+ union {
-+ uint32_t slock;
-+ struct _tickets {
-+ uint16_t owner;
-+ uint16_t next;
-+ } tickets;
-+ };
-+} fiq_lock_t;
-+
-+struct fiq_state;
-+
-+extern void _fiq_print (enum fiq_debug_level dbg_lvl, volatile struct fiq_state *state, char *fmt, ...);
-+#if 0
-+#define fiq_print _fiq_print
-+#else
-+#define fiq_print(x, y, ...)
-+#endif
-+
-+extern bool fiq_enable, fiq_fsm_enable;
-+extern ushort nak_holdoff;
-+
-+/**
-+ * enum fiq_fsm_state - The FIQ FSM states.
-+ *
-+ * This is the "core" of the FIQ FSM. Broadly, the FSM states follow the
-+ * USB2.0 specification for host responses to various transaction states.
-+ * There are modifications to this host state machine because of a variety of
-+ * quirks and limitations in the dwc_otg hardware.
-+ *
-+ * The fsm state is also used to communicate back to the driver on completion of
-+ * a split transaction. The end states are used in conjunction with the interrupts
-+ * raised by the final transaction.
-+ */
-+enum fiq_fsm_state {
-+ /* FIQ isn't enabled for this host channel */
-+ FIQ_PASSTHROUGH = 0,
-+ /* For the first interrupt received for this channel,
-+ * the FIQ has to ack any interrupts indicating success. */
-+ FIQ_PASSTHROUGH_ERRORSTATE = 31,
-+ /* Nonperiodic state groups */
-+ FIQ_NP_SSPLIT_STARTED = 1,
-+ FIQ_NP_SSPLIT_RETRY = 2,
-+ FIQ_NP_OUT_CSPLIT_RETRY = 3,
-+ FIQ_NP_IN_CSPLIT_RETRY = 4,
-+ FIQ_NP_SPLIT_DONE = 5,
-+ FIQ_NP_SPLIT_LS_ABORTED = 6,
-+ /* This differentiates a HS transaction error from a LS one
-+ * (handling the hub state is different) */
-+ FIQ_NP_SPLIT_HS_ABORTED = 7,
-+
-+ /* Periodic state groups */
-+ /* Periodic transactions are either started directly by the IRQ handler
-+ * or deferred if the TT is already in use.
-+ */
-+ FIQ_PER_SSPLIT_QUEUED = 8,
-+ FIQ_PER_SSPLIT_STARTED = 9,
-+ FIQ_PER_SSPLIT_LAST = 10,
-+
-+
-+ FIQ_PER_ISO_OUT_PENDING = 11,
-+ FIQ_PER_ISO_OUT_ACTIVE = 12,
-+ FIQ_PER_ISO_OUT_LAST = 13,
-+ FIQ_PER_ISO_OUT_DONE = 27,
-+
-+ FIQ_PER_CSPLIT_WAIT = 14,
-+ FIQ_PER_CSPLIT_NYET1 = 15,
-+ FIQ_PER_CSPLIT_BROKEN_NYET1 = 28,
-+ FIQ_PER_CSPLIT_NYET_FAFF = 29,
-+ /* For multiple CSPLITs (large isoc IN, or delayed interrupt) */
-+ FIQ_PER_CSPLIT_POLL = 16,
-+ /* The last CSPLIT for a transaction has been issued, differentiates
-+ * for the state machine to queue the next packet.
-+ */
-+ FIQ_PER_CSPLIT_LAST = 17,
-+
-+ FIQ_PER_SPLIT_DONE = 18,
-+ FIQ_PER_SPLIT_LS_ABORTED = 19,
-+ FIQ_PER_SPLIT_HS_ABORTED = 20,
-+ FIQ_PER_SPLIT_NYET_ABORTED = 21,
-+ /* Frame rollover has occurred without the transaction finishing. */
-+ FIQ_PER_SPLIT_TIMEOUT = 22,
-+
-+ /* FIQ-accelerated HS Isochronous state groups */
-+ FIQ_HS_ISOC_TURBO = 23,
-+ /* For interval > 1, SOF wakes up the isochronous FSM */
-+ FIQ_HS_ISOC_SLEEPING = 24,
-+ FIQ_HS_ISOC_DONE = 25,
-+ FIQ_HS_ISOC_ABORTED = 26,
-+ FIQ_DEQUEUE_ISSUED = 30,
-+ FIQ_TEST = 32,
-+};
-+
-+struct fiq_stack {
-+ int magic1;
-+ uint8_t stack[2048];
-+ int magic2;
-+};
-+
-+
-+/**
-+ * struct fiq_dma_info - DMA bounce buffer utilisation information (per-channel)
-+ * @index: Number of slots reported used for IN transactions / number of slots
-+ * transmitted for an OUT transaction
-+ * @slot_len[6]: Number of actual transfer bytes in each slot (255 if unused)
-+ *
-+ * Split transaction transfers can have variable length depending on other bus
-+ * traffic. The OTG core DMA engine requires 4-byte aligned addresses therefore
-+ * each transaction needs a guaranteed aligned address. A maximum of 6 split transfers
-+ * can happen per-frame.
-+ */
-+struct fiq_dma_info {
-+ u8 index;
-+ u8 slot_len[6];
-+};
-+
-+struct __attribute__((packed)) fiq_split_dma_slot {
-+ u8 buf[188];
-+};
-+
-+struct fiq_dma_channel {
-+ struct __attribute__((packed)) fiq_split_dma_slot index[6];
-+};
-+
-+struct fiq_dma_blob {
-+ struct __attribute__((packed)) fiq_dma_channel channel[0];
-+};
-+
-+/**
-+ * struct fiq_hs_isoc_info - USB2.0 isochronous data
-+ * @iso_frame: Pointer to the array of OTG URB iso_frame_descs.
-+ * @nrframes: Total length of iso_frame_desc array
-+ * @index: Current index (FIQ-maintained)
-+ * @stride: Interval in uframes between HS isoc transactions
-+ */
-+struct fiq_hs_isoc_info {
-+ struct dwc_otg_hcd_iso_packet_desc *iso_desc;
-+ unsigned int nrframes;
-+ unsigned int index;
-+ unsigned int stride;
-+};
-+
-+/**
-+ * struct fiq_channel_state - FIQ state machine storage
-+ * @fsm: Current state of the channel as understood by the FIQ
-+ * @nr_errors: Number of transaction errors on this split-transaction
-+ * @hub_addr: SSPLIT/CSPLIT destination hub
-+ * @port_addr: SSPLIT/CSPLIT destination port - always 1 if single TT hub
-+ * @nrpackets: For isoc OUT, the number of split-OUT packets to transmit. For
-+ * split-IN, number of CSPLIT data packets that were received.
-+ * @hcchar_copy:
-+ * @hcsplt_copy:
-+ * @hcintmsk_copy:
-+ * @hctsiz_copy: Copies of the host channel registers.
-+ * For use as scratch, or for returning state.
-+ *
-+ * The fiq_channel_state is state storage between interrupts for a host channel. The
-+ * FSM state is stored here. Members of this structure must only be set up by the
-+ * driver prior to enabling the FIQ for this host channel, and not touched until the FIQ
-+ * has updated the state to either a COMPLETE state group or ABORT state group.
-+ */
-+
-+struct fiq_channel_state {
-+ enum fiq_fsm_state fsm;
-+ unsigned int nr_errors;
-+ unsigned int hub_addr;
-+ unsigned int port_addr;
-+ /* Hardware bug workaround: sometimes channel halt interrupts are
-+ * delayed until the next SOF. Keep track of when we expected to get interrupted. */
-+ unsigned int expected_uframe;
-+ /* number of uframes remaining (for interval > 1 HS isoc transfers) before next transfer */
-+ unsigned int uframe_sleeps;
-+ /* in/out for communicating number of dma buffers used, or number of ISOC to do */
-+ unsigned int nrpackets;
-+ struct fiq_dma_info dma_info;
-+ struct fiq_hs_isoc_info hs_isoc_info;
-+ /* Copies of HC registers - in/out communication from/to IRQ handler
-+ * and for ease of channel setup. A bit of mungeing is performed - for
-+ * example the hctsiz.b.maxp is _always_ the max packet size of the endpoint.
-+ */
-+ hcchar_data_t hcchar_copy;
-+ hcsplt_data_t hcsplt_copy;
-+ hcint_data_t hcint_copy;
-+ hcintmsk_data_t hcintmsk_copy;
-+ hctsiz_data_t hctsiz_copy;
-+ hcdma_data_t hcdma_copy;
-+};
-+
-+/**
-+ * struct fiq_state - top-level FIQ state machine storage
-+ * @mphi_regs: virtual address of the MPHI peripheral register file
-+ * @dwc_regs_base: virtual address of the base of the DWC core register file
-+ * @dma_base: physical address for the base of the DMA bounce buffers
-+ * @dummy_send: Scratch area for sending a fake message to the MPHI peripheral
-+ * @gintmsk_saved: Top-level mask of interrupts that the FIQ has not handled.
-+ * Used for determining which interrupts fired to set off the IRQ handler.
-+ * @haintmsk_saved: Mask of interrupts from host channels that the FIQ did not handle internally.
-+ * @np_count: Non-periodic transactions in the active queue
-+ * @np_sent: Count of non-periodic transactions that have completed
-+ * @next_sched_frame: For periodic transactions handled by the driver's SOF-driven queuing mechanism,
-+ * this is the next frame on which a SOF interrupt is required. Used to hold off
-+ * passing SOF through to the driver until necessary.
-+ * @channel[n]: Per-channel FIQ state. Allocated during init depending on the number of host
-+ * channels configured into the core logic.
-+ *
-+ * This is passed as the first argument to the dwc_otg_fiq_fsm top-level FIQ handler from the asm stub.
-+ * It contains top-level state information.
-+ */
-+struct fiq_state {
-+ fiq_lock_t lock;
-+ mphi_regs_t mphi_regs;
-+ void *dwc_regs_base;
-+ dma_addr_t dma_base;
-+ struct fiq_dma_blob *fiq_dmab;
-+ void *dummy_send;
-+ gintmsk_data_t gintmsk_saved;
-+ haintmsk_data_t haintmsk_saved;
-+ int mphi_int_count;
-+ unsigned int fiq_done;
-+ unsigned int kick_np_queues;
-+ unsigned int next_sched_frame;
-+#ifdef FIQ_DEBUG
-+ char * buffer;
-+ unsigned int bufsiz;
-+#endif
-+ struct fiq_channel_state channel[0];
-+};
-+
-+extern void fiq_fsm_spin_lock(fiq_lock_t *lock);
-+
-+extern void fiq_fsm_spin_unlock(fiq_lock_t *lock);
-+
-+extern int fiq_fsm_too_late(struct fiq_state *st, int n);
-+
-+extern int fiq_fsm_tt_in_use(struct fiq_state *st, int num_channels, int n);
-+
-+extern void dwc_otg_fiq_fsm(struct fiq_state *state, int num_channels);
-+
-+extern void dwc_otg_fiq_nop(struct fiq_state *state);
-+
-+#endif /* DWC_OTG_FIQ_FSM_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_stub.S
-@@ -0,0 +1,80 @@
-+/*
-+ * dwc_otg_fiq_fsm.S - assembly stub for the FSM FIQ
-+ *
-+ * Copyright (c) 2013 Raspberry Pi Foundation
-+ *
-+ * Author: Jonathan Bell <jonathan@raspberrypi.org>
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in the
-+ * documentation and/or other materials provided with the distribution.
-+ * * Neither the name of Raspberry Pi nor the
-+ * names of its contributors may be used to endorse or promote products
-+ * derived from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-+ * DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> BE LIABLE FOR ANY
-+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+
-+#include <asm/assembler.h>
-+#include <linux/linkage.h>
-+
-+
-+.text
-+
-+.global _dwc_otg_fiq_stub_end;
-+
-+/**
-+ * _dwc_otg_fiq_stub() - entry copied to the FIQ vector page to allow
-+ * a C-style function call with arguments from the FIQ banked registers.
-+ * r0 = &hcd->fiq_state
-+ * r1 = &hcd->num_channels
-+ * r2 = &hcd->dma_buffers
-+ * Tramples: r0, r1, r2, r4, fp, ip
-+ */
-+
-+ENTRY(_dwc_otg_fiq_stub)
-+ /* Stash unbanked regs - SP will have been set up for us */
-+ mov ip, sp;
-+ stmdb sp!, {r0-r12, lr};
-+#ifdef FIQ_DEBUG
-+ // Cycle profiling - read cycle counter at start
-+ mrc p15, 0, r5, c15, c12, 1;
-+#endif
-+ /* r11 = fp, don't trample it */
-+ mov r4, fp;
-+ /* set EABI frame size */
-+ sub fp, ip, #512;
-+
-+ /* for fiq NOP mode - just need state */
-+ mov r0, r8;
-+ /* r9 = num_channels */
-+ mov r1, r9;
-+ /* r10 = struct *dma_bufs */
-+// mov r2, r10;
-+
-+ /* r4 = &fiq_c_function */
-+ blx r4;
-+#ifdef FIQ_DEBUG
-+ mrc p15, 0, r4, c15, c12, 1;
-+ subs r5, r5, r4;
-+ // r5 is now the cycle count time for executing the FIQ. Store it somewhere?
-+#endif
-+ ldmia sp!, {r0-r12, lr};
-+ subs pc, lr, #4;
-+_dwc_otg_fiq_stub_end:
-+END(_dwc_otg_fiq_stub)
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
-@@ -0,0 +1,4260 @@
-+
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
-+ * $Revision: #104 $
-+ * $Date: 2011/10/24 $
-+ * $Change: 1871159 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/** @file
-+ * This file implements HCD Core. All code in this file is portable and doesn't
-+ * use any OS specific functions.
-+ * Interface provided by HCD Core is defined in <code><hcd_if.h></code>
-+ * header file.
-+ */
-+
-+#include <linux/usb.h>
-+#include <linux/usb/hcd.h>
-+
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+#include "dwc_otg_fiq_fsm.h"
-+
-+extern bool microframe_schedule;
-+extern uint16_t fiq_fsm_mask, nak_holdoff;
-+
-+//#define DEBUG_HOST_CHANNELS
-+#ifdef DEBUG_HOST_CHANNELS
-+static int last_sel_trans_num_per_scheduled = 0;
-+static int last_sel_trans_num_nonper_scheduled = 0;
-+static int last_sel_trans_num_avail_hc_at_start = 0;
-+static int last_sel_trans_num_avail_hc_at_end = 0;
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+
-+dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void)
-+{
-+ return DWC_ALLOC(sizeof(dwc_otg_hcd_t));
-+}
-+
-+/**
-+ * Connection timeout function. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds.
-+ */
-+void dwc_otg_hcd_connect_timeout(void *ptr)
-+{
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr);
-+ DWC_PRINTF("Connect Timeout\n");
-+ __DWC_ERROR("Device Not Connected/Responding\n");
-+}
-+
-+#if defined(DEBUG)
-+static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ if (qh->channel != NULL) {
-+ dwc_hc_t *hc = qh->channel;
-+ dwc_list_link_t *item;
-+ dwc_otg_qh_t *qh_item;
-+ int num_channels = hcd->core_if->core_params->host_channels;
-+ int i;
-+
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+
-+ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+ hcdma = DWC_READ_REG32(&hc_regs->hcdma);
-+
-+ DWC_PRINTF(" Assigned to channel %p:\n", hc);
-+ DWC_PRINTF(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32,
-+ hcsplt.d32);
-+ DWC_PRINTF(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32,
-+ hcdma);
-+ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINTF(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINTF(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINTF(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINTF(" qh: %p\n", hc->qh);
-+ DWC_PRINTF(" NP inactive sched:\n");
-+ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) {
-+ qh_item =
-+ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINTF(" %p\n", qh_item);
-+ }
-+ DWC_PRINTF(" NP active sched:\n");
-+ DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) {
-+ qh_item =
-+ DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_PRINTF(" %p\n", qh_item);
-+ }
-+ DWC_PRINTF(" Channels: \n");
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = hcd->hc_ptr_array[i];
-+ DWC_PRINTF(" %2d: %p\n", i, hc);
-+ }
-+ }
-+}
-+#else
-+#define dump_channel_info(hcd, qh)
-+#endif /* DEBUG */
-+
-+/**
-+ * Work queue function for starting the HCD when A-Cable is connected.
-+ * The hcd_start() must be called in a process context.
-+ */
-+static void hcd_start_func(void *_vp)
-+{
-+ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd);
-+ if (hcd) {
-+ hcd->fops->start(hcd);
-+ }
-+}
-+
-+static void del_xfer_timers(dwc_otg_hcd_t * hcd)
-+{
-+#ifdef DEBUG
-+ int i;
-+ int num_channels = hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]);
-+ }
-+#endif
-+}
-+
-+static void del_timers(dwc_otg_hcd_t * hcd)
-+{
-+ del_xfer_timers(hcd);
-+ DWC_TIMER_CANCEL(hcd->conn_timer);
-+}
-+
-+/**
-+ * Processes all the URBs in a single list of QHs. Completes them with
-+ * -ESHUTDOWN and frees the QTD.
-+ */
-+static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
-+{
-+ dwc_list_link_t *qh_item, *qh_tmp;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_qtd_t *qtd, *qtd_tmp;
-+
-+ DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) {
-+ qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry);
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp,
-+ &qh->qtd_list, qtd_list_entry) {
-+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-+ if (qtd->urb != NULL) {
-+ hcd->fops->complete(hcd, qtd->urb->priv,
-+ qtd->urb, -DWC_E_SHUTDOWN);
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
-+ }
-+
-+ }
-+ if(qh->channel) {
-+ /* Using hcchar.chen == 1 is not a reliable test.
-+ * It is possible that the channel has already halted
-+ * but not yet been through the IRQ handler.
-+ */
-+ dwc_otg_hc_halt(hcd->core_if, qh->channel,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE);
-+ if(microframe_schedule)
-+ hcd->available_host_channels++;
-+ qh->channel = NULL;
-+ }
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ }
-+}
-+
-+/**
-+ * Responds with an error status of ESHUTDOWN to all URBs in the non-periodic
-+ * and periodic schedules. The QTD associated with each URB is removed from
-+ * the schedule and freed. This function may be called when a disconnect is
-+ * detected or when the HCD is being stopped.
-+ */
-+static void kill_all_urbs(dwc_otg_hcd_t * hcd)
-+{
-+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
-+ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
-+ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
-+}
-+
-+/**
-+ * Start the connection timer. An OTG host is required to display a
-+ * message if the device does not connect within 10 seconds. The
-+ * timer is deleted if a port connect interrupt occurs before the
-+ * timer expires.
-+ */
-+static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd)
-+{
-+ DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ );
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_session_start_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+ dwc_otg_hcd = p;
-+ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback function for starting the HCD when A-Cable is
-+ * connected.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_start_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = p;
-+ dwc_otg_core_if_t *core_if;
-+ hprt0_data_t hprt0;
-+
-+ core_if = dwc_otg_hcd->core_if;
-+
-+ if (core_if->op_state == B_HOST) {
-+ /*
-+ * Reset the port. During a HNP mode switch the reset
-+ * needs to occur within 1ms and have a duration of at
-+ * least 50ms.
-+ */
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtrst = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+ DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg,
-+ hcd_start_func, dwc_otg_hcd, 50,
-+ "start hcd");
-+
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback function for disconnect of the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_disconnect_cb(void *p)
-+{
-+ gintsts_data_t intr;
-+ dwc_otg_hcd_t *dwc_otg_hcd = p;
-+
-+ /*
-+ * Set status flags for the hub driver.
-+ */
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 0;
-+ if(fiq_enable)
-+ local_fiq_disable();
-+ /*
-+ * Shutdown any transfers in process by clearing the Tx FIFO Empty
-+ * interrupt mask and status bits and disabling subsequent host
-+ * channel interrupts.
-+ */
-+ intr.d32 = 0;
-+ intr.b.nptxfempty = 1;
-+ intr.b.ptxfempty = 1;
-+ intr.b.hcintr = 1;
-+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk,
-+ intr.d32, 0);
-+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts,
-+ intr.d32, 0);
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /*
-+ * Turn off the vbus power only if the core has transitioned to device
-+ * mode. If still in host mode, need to keep power on to detect a
-+ * reconnection.
-+ */
-+ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
-+ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+ DWC_PRINTF("Disconnect: PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0,
-+ hprt0.d32);
-+ }
-+
-+ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
-+ }
-+
-+ /* Respond with an error status to all URBs in the schedule. */
-+ kill_all_urbs(dwc_otg_hcd);
-+
-+ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
-+ /* Clean up any host channels that were in use. */
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ hcchar_data_t hcchar;
-+
-+ num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
-+
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ /* Flush out any channel requests in slave mode. */
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (DWC_CIRCLEQ_EMPTY_ENTRY
-+ (channel, hc_list_entry)) {
-+ hc_regs =
-+ dwc_otg_hcd->core_if->
-+ host_if->hc_regs[i];
-+ hcchar.d32 =
-+ DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chen = 0;
-+ hcchar.b.chdis = 1;
-+ hcchar.b.epdir = 0;
-+ DWC_WRITE_REG32
-+ (&hc_regs->hcchar,
-+ hcchar.d32);
-+ }
-+ }
-+ }
-+ }
-+
-+ for (i = 0; i < num_channels; i++) {
-+ channel = dwc_otg_hcd->hc_ptr_array[i];
-+ if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) {
-+ hc_regs =
-+ dwc_otg_hcd->core_if->host_if->hc_regs[i];
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ /* Halt the channel. */
-+ hcchar.b.chdis = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar,
-+ hcchar.d32);
-+ }
-+
-+ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if,
-+ channel);
-+ DWC_CIRCLEQ_INSERT_TAIL
-+ (&dwc_otg_hcd->free_hc_list, channel,
-+ hc_list_entry);
-+ /*
-+ * Added for Descriptor DMA to prevent channel double cleanup
-+ * in release_channel_ddma(). Which called from ep_disable
-+ * when device disconnect.
-+ */
-+ channel->qh = NULL;
-+ }
-+ }
-+ if(fiq_fsm_enable) {
-+ for(i=0; i < 128; i++) {
-+ dwc_otg_hcd->hub_port[i] = 0;
-+ }
-+ }
-+
-+ }
-+
-+ if(fiq_enable)
-+ local_fiq_enable();
-+
-+ if (dwc_otg_hcd->fops->disconnect) {
-+ dwc_otg_hcd->fops->disconnect(dwc_otg_hcd);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * HCD Callback function for stopping the HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int32_t dwc_otg_hcd_stop_cb(void *p)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = p;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
-+ dwc_otg_hcd_stop(dwc_otg_hcd);
-+ return 1;
-+}
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+/**
-+ * HCD Callback function for sleep of HCD.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int dwc_otg_hcd_sleep_cb(void *p)
-+{
-+ dwc_otg_hcd_t *hcd = p;
-+
-+ dwc_otg_hcd_free_hc_from_lpm(hcd);
-+
-+ return 0;
-+}
-+#endif
-+
-+
-+/**
-+ * HCD Callback function for Remote Wakeup.
-+ *
-+ * @param p void pointer to the <code>struct usb_hcd</code>
-+ */
-+static int dwc_otg_hcd_rem_wakeup_cb(void *p)
-+{
-+ dwc_otg_hcd_t *hcd = p;
-+
-+ if (hcd->core_if->lx_state == DWC_OTG_L2) {
-+ hcd->flags.b.port_suspend_change = 1;
-+ }
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ else {
-+ hcd->flags.b.port_l1_change = 1;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+/**
-+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
-+ * stopped.
-+ */
-+void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd)
-+{
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
-+
-+ /*
-+ * The root hub should be disconnected before this function is called.
-+ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
-+ * and the QH lists (via ..._hcd_endpoint_disable).
-+ */
-+
-+ /* Turn off all host-specific interrupts. */
-+ dwc_otg_disable_host_interrupts(hcd->core_if);
-+
-+ /* Turn off the vbus power */
-+ DWC_PRINTF("PortPower off\n");
-+ hprt0.b.prtpwr = 0;
-+ DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32);
-+ dwc_mdelay(1);
-+}
-+
-+int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd,
-+ dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle,
-+ int atomic_alloc)
-+{
-+ int retval = 0;
-+ uint8_t needs_scheduling = 0;
-+ dwc_otg_transaction_type_e tr_type;
-+ dwc_otg_qtd_t *qtd;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ hprt0_data_t hprt0 = { .d32 = 0 };
-+
-+#ifdef DEBUG /* integrity checks (Broadcom) */
-+ if (NULL == hcd->core_if) {
-+ DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n");
-+ /* No longer connected. */
-+ return -DWC_E_INVALID;
-+ }
-+#endif
-+ if (!hcd->flags.b.port_connect_status) {
-+ /* No longer connected. */
-+ DWC_ERROR("Not connected\n");
-+ return -DWC_E_NO_DEVICE;
-+ }
-+
-+ /* Some core configurations cannot support LS traffic on a FS root port */
-+ if ((hcd->fops->speed(hcd, dwc_otg_urb->priv) == USB_SPEED_LOW) &&
-+ (hcd->core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (hcd->core_if->hwcfg2.b.hs_phy_type == 1)) {
-+ hprt0.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0);
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) {
-+ return -DWC_E_NO_DEVICE;
-+ }
-+ }
-+
-+ qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc);
-+ if (qtd == NULL) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+#ifdef DEBUG /* integrity checks (Broadcom) */
-+ if (qtd->urb == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ if (qtd->urb->priv == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+#endif
-+ intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk);
-+ if(!intr_mask.b.sofintr || fiq_enable) needs_scheduling = 1;
-+ if((((dwc_otg_qh_t *)ep_handle)->ep_type == UE_BULK) && !(qtd->urb->flags & URB_GIVEBACK_ASAP))
-+ /* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */
-+ needs_scheduling = 0;
-+
-+ retval = dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc);
-+ // creates a new queue in ep_handle if it doesn't exist already
-+ if (retval < 0) {
-+ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
-+ "Error status %d\n", retval);
-+ dwc_otg_hcd_qtd_free(qtd);
-+ return retval;
-+ }
-+
-+ if(needs_scheduling) {
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+ }
-+ return retval;
-+}
-+
-+int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd,
-+ dwc_otg_hcd_urb_t * dwc_otg_urb)
-+{
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_qtd_t *urb_qtd;
-+ BUG_ON(!hcd);
-+ BUG_ON(!dwc_otg_urb);
-+
-+#ifdef DEBUG /* integrity checks (Broadcom) */
-+
-+ if (hcd == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n");
-+ return -DWC_E_INVALID;
-+ }
-+ if (dwc_otg_urb == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n");
-+ return -DWC_E_INVALID;
-+ }
-+ if (dwc_otg_urb->qtd == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n");
-+ return -DWC_E_INVALID;
-+ }
-+ urb_qtd = dwc_otg_urb->qtd;
-+ BUG_ON(!urb_qtd);
-+ if (urb_qtd->qh == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n");
-+ return -DWC_E_INVALID;
-+ }
-+#else
-+ urb_qtd = dwc_otg_urb->qtd;
-+ BUG_ON(!urb_qtd);
-+#endif
-+ qh = urb_qtd->qh;
-+ BUG_ON(!qh);
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ if (urb_qtd->in_process) {
-+ dump_channel_info(hcd, qh);
-+ }
-+ }
-+#ifdef DEBUG /* integrity checks (Broadcom) */
-+ if (hcd->core_if == NULL) {
-+ DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n");
-+ return -DWC_E_INVALID;
-+ }
-+#endif
-+ if (urb_qtd->in_process && qh->channel) {
-+ /* The QTD is in process (it has been assigned to a channel). */
-+ if (hcd->flags.b.port_connect_status) {
-+ int n = qh->channel->hc_num;
-+ /*
-+ * If still connected (i.e. in host mode), halt the
-+ * channel so it can be used for other transfers. If
-+ * no longer connected, the host registers can't be
-+ * written to halt the channel since the core is in
-+ * device mode.
-+ */
-+ /* In FIQ FSM mode, we need to shut down carefully.
-+ * The FIQ may attempt to restart a disabled channel */
-+ if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) {
-+ qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE;
-+ qh->channel->halt_pending = 1;
-+ hcd->fiq_state->channel[n].fsm = FIQ_DEQUEUE_ISSUED;
-+ } else {
-+ dwc_otg_hc_halt(hcd->core_if, qh->channel,
-+ DWC_OTG_HC_XFER_URB_DEQUEUE);
-+ }
-+ }
-+ }
-+
-+ /*
-+ * Free the QTD and clean up the associated QH. Leave the QH in the
-+ * schedule if it has any remaining QTDs.
-+ */
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - "
-+ "delete %sQueue handler\n",
-+ hcd->core_if->dma_desc_enable?"DMA ":"");
-+ if (!hcd->core_if->dma_desc_enable) {
-+ uint8_t b = urb_qtd->in_process;
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
-+ if (b) {
-+ dwc_otg_hcd_qh_deactivate(hcd, qh, 0);
-+ qh->channel = NULL;
-+ } else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ }
-+ } else {
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
-+ }
-+ return 0;
-+}
-+
-+int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
-+ int retry)
-+{
-+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
-+ int retval = 0;
-+ dwc_irqflags_t flags;
-+
-+ if (retry < 0) {
-+ retval = -DWC_E_INVALID;
-+ goto done;
-+ }
-+
-+ if (!qh) {
-+ retval = -DWC_E_INVALID;
-+ goto done;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+
-+ while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) {
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+ retry--;
-+ dwc_msleep(5);
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+ }
-+
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+ /*
-+ * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove
-+ * and qh_free to prevent stack dump on DWC_DMA_FREE() with
-+ * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free()
-+ * and dwc_otg_hcd_frame_list_alloc().
-+ */
-+ dwc_otg_hcd_qh_free(hcd, qh);
-+
-+done:
-+ return retval;
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
-+int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle)
-+{
-+ int retval = 0;
-+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
-+ if (!qh)
-+ return -DWC_E_INVALID;
-+
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ return retval;
-+}
-+#endif
-+
-+/**
-+ * HCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
-+ .start = dwc_otg_hcd_start_cb,
-+ .stop = dwc_otg_hcd_stop_cb,
-+ .disconnect = dwc_otg_hcd_disconnect_cb,
-+ .session_start = dwc_otg_hcd_session_start_cb,
-+ .resume_wakeup = dwc_otg_hcd_rem_wakeup_cb,
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ .sleep = dwc_otg_hcd_sleep_cb,
-+#endif
-+ .p = 0,
-+};
-+
-+/**
-+ * Reset tasklet function
-+ */
-+static void reset_tasklet_func(void *data)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data;
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ hprt0_data_t hprt0;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
-+
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtrst = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ dwc_mdelay(60);
-+
-+ hprt0.b.prtrst = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+}
-+
-+static void completion_tasklet_func(void *ptr)
-+{
-+ dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) ptr;
-+ struct urb *urb;
-+ urb_tq_entry_t *item;
-+ dwc_irqflags_t flags;
-+
-+ /* This could just be spin_lock_irq */
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+ while (!DWC_TAILQ_EMPTY(&hcd->completed_urb_list)) {
-+ item = DWC_TAILQ_FIRST(&hcd->completed_urb_list);
-+ urb = item->urb;
-+ DWC_TAILQ_REMOVE(&hcd->completed_urb_list, item,
-+ urb_tq_entries);
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+ DWC_FREE(item);
-+
-+ usb_hcd_giveback_urb(hcd->priv, urb, urb->status);
-+
-+
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+ }
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+ return;
-+}
-+
-+static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
-+{
-+ dwc_list_link_t *item;
-+ dwc_otg_qh_t *qh;
-+ dwc_irqflags_t flags;
-+
-+ if (!qh_list->next) {
-+ /* The list hasn't been initialized yet. */
-+ return;
-+ }
-+ /*
-+ * Hold spinlock here. Not needed in that case if bellow
-+ * function is being called from ISR
-+ */
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+ /* Ensure there are no QTDs or URBs left. */
-+ kill_urbs_in_qh_list(hcd, qh_list);
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+
-+ DWC_LIST_FOREACH(item, qh_list) {
-+ qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
-+ dwc_otg_hcd_qh_remove_and_free(hcd, qh);
-+ }
-+}
-+
-+/**
-+ * Exit from Hibernation if Host did not detect SRP from connected SRP capable
-+ * Device during SRP time by host power up.
-+ */
-+void dwc_otg_hcd_power_up(void *ptr)
-+{
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
-+
-+ DWC_PRINTF("%s called\n", __FUNCTION__);
-+
-+ if (!core_if->hibernation_suspend) {
-+ DWC_PRINTF("Already exited from Hibernation\n");
-+ return;
-+ }
-+
-+ /* Switch on the voltage to the core */
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Reset the core */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Disable power clamps */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ /* Remove reset the core signal */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnrstn = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Disable PMU interrupt */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ core_if->hibernation_suspend = 0;
-+
-+ /* Disable PMU */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+ dwc_udelay(10);
-+
-+ /* Enable VBUS */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.dis_vbus = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
-+
-+ core_if->op_state = A_HOST;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_hcd_start(core_if);
-+}
-+
-+void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num)
-+{
-+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num];
-+ struct fiq_dma_blob *blob = hcd->fiq_dmab;
-+ int i;
-+
-+ st->fsm = FIQ_PASSTHROUGH;
-+ st->hcchar_copy.d32 = 0;
-+ st->hcsplt_copy.d32 = 0;
-+ st->hcint_copy.d32 = 0;
-+ st->hcintmsk_copy.d32 = 0;
-+ st->hctsiz_copy.d32 = 0;
-+ st->hcdma_copy.d32 = 0;
-+ st->nr_errors = 0;
-+ st->hub_addr = 0;
-+ st->port_addr = 0;
-+ st->expected_uframe = 0;
-+ st->nrpackets = 0;
-+ st->dma_info.index = 0;
-+ for (i = 0; i < 6; i++)
-+ st->dma_info.slot_len[i] = 255;
-+ st->hs_isoc_info.index = 0;
-+ st->hs_isoc_info.iso_desc = NULL;
-+ st->hs_isoc_info.nrframes = 0;
-+
-+ DWC_MEMSET(&blob->channel[num].index[0], 0x6b, 1128);
-+}
-+
-+/**
-+ * Frees secondary storage associated with the dwc_otg_hcd structure contained
-+ * in the struct usb_hcd field.
-+ */
-+static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ struct device *dev = dwc_otg_hcd_to_dev(dwc_otg_hcd);
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
-+
-+ del_timers(dwc_otg_hcd);
-+
-+ /* Free memory for QH/QTD lists */
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
-+ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
-+
-+ /* Free memory for the host channels. */
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
-+
-+#ifdef DEBUG
-+ if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) {
-+ DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]);
-+ }
-+#endif
-+ if (hc != NULL) {
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n",
-+ i, hc);
-+ DWC_FREE(hc);
-+ }
-+ }
-+
-+ if (dwc_otg_hcd->core_if->dma_enable) {
-+ if (dwc_otg_hcd->status_buf_dma) {
-+ DWC_DMA_FREE(dev, DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ dwc_otg_hcd->status_buf,
-+ dwc_otg_hcd->status_buf_dma);
-+ }
-+ } else if (dwc_otg_hcd->status_buf != NULL) {
-+ DWC_FREE(dwc_otg_hcd->status_buf);
-+ }
-+ DWC_SPINLOCK_FREE(dwc_otg_hcd->channel_lock);
-+ DWC_SPINLOCK_FREE(dwc_otg_hcd->lock);
-+ /* Set core_if's lock pointer to NULL */
-+ dwc_otg_hcd->core_if->lock = NULL;
-+
-+ DWC_TIMER_FREE(dwc_otg_hcd->conn_timer);
-+ DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet);
-+ DWC_TASK_FREE(dwc_otg_hcd->completion_tasklet);
-+ DWC_FREE(dwc_otg_hcd->fiq_state);
-+
-+#ifdef DWC_DEV_SRPCAP
-+ if (dwc_otg_hcd->core_if->power_down == 2 &&
-+ dwc_otg_hcd->core_if->pwron_timer) {
-+ DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer);
-+ }
-+#endif
-+ DWC_FREE(dwc_otg_hcd);
-+}
-+
-+int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
-+
-+int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if)
-+{
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+ int retval = 0;
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK))
-+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->lock);
-+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(hcd->channel_lock);
-+#else
-+ hcd->lock = DWC_SPINLOCK_ALLOC();
-+ hcd->channel_lock = DWC_SPINLOCK_ALLOC();
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n",
-+ hcd, core_if);
-+ if (!hcd->lock) {
-+ DWC_ERROR("Could not allocate lock for pcd");
-+ DWC_FREE(hcd);
-+ retval = -DWC_E_NO_MEMORY;
-+ goto out;
-+ }
-+ hcd->core_if = core_if;
-+
-+ /* Register the HCD CIL Callbacks */
-+ dwc_otg_cil_register_hcd_callbacks(hcd->core_if,
-+ &hcd_cil_callbacks, hcd);
-+
-+ /* Initialize the non-periodic schedule. */
-+ DWC_LIST_INIT(&hcd->non_periodic_sched_inactive);
-+ DWC_LIST_INIT(&hcd->non_periodic_sched_active);
-+
-+ /* Initialize the periodic schedule. */
-+ DWC_LIST_INIT(&hcd->periodic_sched_inactive);
-+ DWC_LIST_INIT(&hcd->periodic_sched_ready);
-+ DWC_LIST_INIT(&hcd->periodic_sched_assigned);
-+ DWC_LIST_INIT(&hcd->periodic_sched_queued);
-+ DWC_TAILQ_INIT(&hcd->completed_urb_list);
-+ /*
-+ * Create a host channel descriptor for each host channel implemented
-+ * in the controller. Initialize the channel descriptor array.
-+ */
-+ DWC_CIRCLEQ_INIT(&hcd->free_hc_list);
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array));
-+ for (i = 0; i < num_channels; i++) {
-+ channel = DWC_ALLOC(sizeof(dwc_hc_t));
-+ if (channel == NULL) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR("%s: host channel allocation failed\n",
-+ __func__);
-+ dwc_otg_hcd_free(hcd);
-+ goto out;
-+ }
-+ channel->hc_num = i;
-+ hcd->hc_ptr_array[i] = channel;
-+#ifdef DEBUG
-+ hcd->core_if->hc_xfer_timer[i] =
-+ DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout,
-+ &hcd->core_if->hc_xfer_info[i]);
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i,
-+ channel);
-+ }
-+
-+ if (fiq_enable) {
-+ hcd->fiq_state = DWC_ALLOC(sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels));
-+ if (!hcd->fiq_state) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR("%s: cannot allocate fiq_state structure\n", __func__);
-+ dwc_otg_hcd_free(hcd);
-+ goto out;
-+ }
-+ DWC_MEMSET(hcd->fiq_state, 0, (sizeof(struct fiq_state) + (sizeof(struct fiq_channel_state) * num_channels)));
-+
-+ for (i = 0; i < num_channels; i++) {
-+ hcd->fiq_state->channel[i].fsm = FIQ_PASSTHROUGH;
-+ }
-+ hcd->fiq_state->dummy_send = DWC_ALLOC_ATOMIC(16);
-+
-+ hcd->fiq_stack = DWC_ALLOC(sizeof(struct fiq_stack));
-+ if (!hcd->fiq_stack) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR("%s: cannot allocate fiq_stack structure\n", __func__);
-+ dwc_otg_hcd_free(hcd);
-+ goto out;
-+ }
-+ hcd->fiq_stack->magic1 = 0xDEADBEEF;
-+ hcd->fiq_stack->magic2 = 0xD00DFEED;
-+ hcd->fiq_state->gintmsk_saved.d32 = ~0;
-+ hcd->fiq_state->haintmsk_saved.b2.chint = ~0;
-+
-+ /* This bit is terrible and uses no API, but necessary. The FIQ has no concept of DMA pools
-+ * (and if it did, would be a lot slower). This allocates a chunk of memory (~9kiB for 8 host channels)
-+ * for use as transaction bounce buffers in a 2-D array. Our access into this chunk is done by some
-+ * moderately readable array casts.
-+ */
-+ hcd->fiq_dmab = DWC_DMA_ALLOC(dev, (sizeof(struct fiq_dma_channel) * num_channels), &hcd->fiq_state->dma_base);
-+ DWC_WARN("FIQ DMA bounce buffers: virt = 0x%08x dma = 0x%08x len=%d",
-+ (unsigned int)hcd->fiq_dmab, (unsigned int)hcd->fiq_state->dma_base,
-+ sizeof(struct fiq_dma_channel) * num_channels);
-+
-+ DWC_MEMSET(hcd->fiq_dmab, 0x6b, 9024);
-+
-+ /* pointer for debug in fiq_print */
-+ hcd->fiq_state->fiq_dmab = hcd->fiq_dmab;
-+ if (fiq_fsm_enable) {
-+ int i;
-+ for (i=0; i < hcd->core_if->core_params->host_channels; i++) {
-+ dwc_otg_cleanup_fiq_channel(hcd, i);
-+ }
-+ DWC_PRINTF("FIQ FSM acceleration enabled for :\n%s%s%s%s",
-+ (fiq_fsm_mask & 0x1) ? "Non-periodic Split Transactions\n" : "",
-+ (fiq_fsm_mask & 0x2) ? "Periodic Split Transactions\n" : "",
-+ (fiq_fsm_mask & 0x4) ? "High-Speed Isochronous Endpoints\n" : "",
-+ (fiq_fsm_mask & 0x8) ? "Interrupt/Control Split Transaction hack enabled\n" : "");
-+ }
-+ }
-+
-+ /* Initialize the Connection timeout timer. */
-+ hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer",
-+ dwc_otg_hcd_connect_timeout, 0);
-+
-+ printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled");
-+ if (microframe_schedule)
-+ init_hcd_usecs(hcd);
-+
-+ /* Initialize reset tasklet. */
-+ hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd);
-+
-+ hcd->completion_tasklet = DWC_TASK_ALLOC("completion_tasklet",
-+ completion_tasklet_func, hcd);
-+#ifdef DWC_DEV_SRPCAP
-+ if (hcd->core_if->power_down == 2) {
-+ /* Initialize Power on timer for Host power up in case hibernation */
-+ hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER",
-+ dwc_otg_hcd_power_up, core_if);
-+ }
-+#endif
-+
-+ /*
-+ * Allocate space for storing data on status transactions. Normally no
-+ * data is sent, but this space acts as a bit bucket. This must be
-+ * done after usb_add_hcd since that function allocates the DMA buffer
-+ * pool.
-+ */
-+ if (hcd->core_if->dma_enable) {
-+ hcd->status_buf =
-+ DWC_DMA_ALLOC(dev, DWC_OTG_HCD_STATUS_BUF_SIZE,
-+ &hcd->status_buf_dma);
-+ } else {
-+ hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE);
-+ }
-+ if (!hcd->status_buf) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR("%s: status_buf allocation failed\n", __func__);
-+ dwc_otg_hcd_free(hcd);
-+ goto out;
-+ }
-+
-+ hcd->otg_port = 1;
-+ hcd->frame_list = NULL;
-+ hcd->frame_list_dma = 0;
-+ hcd->periodic_qh_count = 0;
-+
-+ DWC_MEMSET(hcd->hub_port, 0, sizeof(hcd->hub_port));
-+#ifdef FIQ_DEBUG
-+ DWC_MEMSET(hcd->hub_port_alloc, -1, sizeof(hcd->hub_port_alloc));
-+#endif
-+
-+out:
-+ return retval;
-+}
-+
-+void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd)
-+{
-+ /* Turn off all host-specific interrupts. */
-+ dwc_otg_disable_host_interrupts(hcd->core_if);
-+
-+ dwc_otg_hcd_free(hcd);
-+}
-+
-+/**
-+ * Initializes dynamic portions of the DWC_otg HCD state.
-+ */
-+static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd)
-+{
-+ int num_channels;
-+ int i;
-+ dwc_hc_t *channel;
-+ dwc_hc_t *channel_tmp;
-+
-+ hcd->flags.d32 = 0;
-+
-+ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
-+ if (!microframe_schedule) {
-+ hcd->non_periodic_channels = 0;
-+ hcd->periodic_channels = 0;
-+ } else {
-+ hcd->available_host_channels = hcd->core_if->core_params->host_channels;
-+ }
-+ /*
-+ * Put all channels in the free channel list and clean up channel
-+ * states.
-+ */
-+ DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp,
-+ &hcd->free_hc_list, hc_list_entry) {
-+ DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry);
-+ }
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ for (i = 0; i < num_channels; i++) {
-+ channel = hcd->hc_ptr_array[i];
-+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel,
-+ hc_list_entry);
-+ dwc_otg_hc_cleanup(hcd->core_if, channel);
-+ }
-+
-+ /* Initialize the DWC core for host mode operation. */
-+ dwc_otg_core_host_init(hcd->core_if);
-+
-+ /* Set core_if's lock pointer to the hcd->lock */
-+ hcd->core_if->lock = hcd->lock;
-+}
-+
-+/**
-+ * Assigns transactions from a QTD to a free host channel and initializes the
-+ * host channel to perform the transactions. The host channel is removed from
-+ * the free list.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param qh Transactions from the first QTD for this QH are selected and
-+ * assigned to a free host channel.
-+ */
-+static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ dwc_hc_t *hc;
-+ dwc_otg_qtd_t *qtd;
-+ dwc_otg_hcd_urb_t *urb;
-+ void* ptr = NULL;
-+ uint32_t intr_enable;
-+ unsigned long flags;
-+ gintmsk_data_t gintmsk = { .d32 = 0, };
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+
-+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-+
-+ urb = qtd->urb;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length);
-+
-+ if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info))
-+ urb->actual_length = urb->length;
-+
-+
-+ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
-+
-+ /* Remove the host channel from the free list. */
-+ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
-+
-+ qh->channel = hc;
-+
-+ qtd->in_process = 1;
-+
-+ /*
-+ * Use usb_pipedevice to determine device address. This address is
-+ * 0 before the SET_ADDRESS command and the correct address afterward.
-+ */
-+ hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info);
-+ hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info);
-+ hc->speed = qh->dev_speed;
-+ hc->max_packet = dwc_max_packet(qh->maxp);
-+
-+ hc->xfer_started = 0;
-+ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
-+ hc->error_state = (qtd->error_count > 0);
-+ hc->halt_on_queue = 0;
-+ hc->halt_pending = 0;
-+ hc->requests = 0;
-+
-+ /*
-+ * The following values may be modified in the transfer type section
-+ * below. The xfer_len value may be reduced when the transfer is
-+ * started to accommodate the max widths of the XferSize and PktCnt
-+ * fields in the HCTSIZn register.
-+ */
-+
-+ hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0);
-+ if (hc->ep_is_in) {
-+ hc->do_ping = 0;
-+ } else {
-+ hc->do_ping = qh->ping_state;
-+ }
-+
-+ hc->data_pid_start = qh->data_toggle;
-+ hc->multi_count = 1;
-+
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length;
-+
-+ /* For non-dword aligned case */
-+ if (((unsigned long)hc->xfer_buff & 0x3)
-+ && !hcd->core_if->dma_desc_enable) {
-+ ptr = (uint8_t *) urb->buf + urb->actual_length;
-+ }
-+ } else {
-+ hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length;
-+ }
-+ hc->xfer_len = urb->length - urb->actual_length;
-+ hc->xfer_count = 0;
-+
-+ /*
-+ * Set the split attributes
-+ */
-+ hc->do_split = 0;
-+ if (qh->do_split) {
-+ uint32_t hub_addr, port_addr;
-+ hc->do_split = 1;
-+ hc->xact_pos = qtd->isoc_split_pos;
-+ /* We don't need to do complete splits anymore */
-+// if(fiq_fsm_enable)
-+ if (0)
-+ hc->complete_split = qtd->complete_split = 0;
-+ else
-+ hc->complete_split = qtd->complete_split;
-+
-+ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr);
-+ hc->hub_addr = (uint8_t) hub_addr;
-+ hc->port_addr = (uint8_t) port_addr;
-+ }
-+
-+ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
-+ case UE_CONTROL:
-+ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n");
-+ hc->do_ping = 0;
-+ hc->ep_is_in = 0;
-+ hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *) urb->setup_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *) urb->setup_packet;
-+ }
-+ hc->xfer_len = 8;
-+ ptr = NULL;
-+ break;
-+ case DWC_OTG_CONTROL_DATA:
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n");
-+ hc->data_pid_start = qtd->data_toggle;
-+ break;
-+ case DWC_OTG_CONTROL_STATUS:
-+ /*
-+ * Direction is opposite of data direction or IN if no
-+ * data.
-+ */
-+ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n");
-+ if (urb->length == 0) {
-+ hc->ep_is_in = 1;
-+ } else {
-+ hc->ep_is_in =
-+ dwc_otg_hcd_is_pipe_out(&urb->pipe_info);
-+ }
-+ if (hc->ep_is_in) {
-+ hc->do_ping = 0;
-+ }
-+
-+ hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
-+
-+ hc->xfer_len = 0;
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *) hcd->status_buf_dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *) hcd->status_buf;
-+ }
-+ ptr = NULL;
-+ break;
-+ }
-+ break;
-+ case UE_BULK:
-+ hc->ep_type = DWC_OTG_EP_TYPE_BULK;
-+ break;
-+ case UE_INTERRUPT:
-+ hc->ep_type = DWC_OTG_EP_TYPE_INTR;
-+ break;
-+ case UE_ISOCHRONOUS:
-+ {
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc;
-+
-+ hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
-+
-+ if (hcd->core_if->dma_desc_enable)
-+ break;
-+
-+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
-+
-+ frame_desc->status = 0;
-+
-+ if (hcd->core_if->dma_enable) {
-+ hc->xfer_buff = (uint8_t *) urb->dma;
-+ } else {
-+ hc->xfer_buff = (uint8_t *) urb->buf;
-+ }
-+ hc->xfer_buff +=
-+ frame_desc->offset + qtd->isoc_split_offset;
-+ hc->xfer_len =
-+ frame_desc->length - qtd->isoc_split_offset;
-+
-+ /* For non-dword aligned buffers */
-+ if (((unsigned long)hc->xfer_buff & 0x3)
-+ && hcd->core_if->dma_enable) {
-+ ptr =
-+ (uint8_t *) urb->buf + frame_desc->offset +
-+ qtd->isoc_split_offset;
-+ } else
-+ ptr = NULL;
-+
-+ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ if (hc->xfer_len <= 188) {
-+ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ } else {
-+ hc->xact_pos =
-+ DWC_HCSPLIT_XACTPOS_BEGIN;
-+ }
-+ }
-+ }
-+ break;
-+ }
-+ /* non DWORD-aligned buffer case */
-+ if (ptr) {
-+ uint32_t buf_size;
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ buf_size = hcd->core_if->core_params->max_transfer_size;
-+ } else {
-+ buf_size = 4096;
-+ }
-+ if (!qh->dw_align_buf) {
-+ qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(dev, buf_size,
-+ &qh->dw_align_buf_dma);
-+ if (!qh->dw_align_buf) {
-+ DWC_ERROR
-+ ("%s: Failed to allocate memory to handle "
-+ "non-dword aligned buffer case\n",
-+ __func__);
-+ return;
-+ }
-+ }
-+ if (!hc->ep_is_in) {
-+ dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len);
-+ }
-+ hc->align_buff = qh->dw_align_buf_dma;
-+ } else {
-+ hc->align_buff = 0;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This value may be modified when the transfer is started to
-+ * reflect the actual transfer length.
-+ */
-+ hc->multi_count = dwc_hb_mult(qh->maxp);
-+ }
-+
-+ if (hcd->core_if->dma_desc_enable)
-+ hc->desc_list_addr = qh->desc_list_dma;
-+
-+ dwc_otg_hc_init(hcd->core_if, hc);
-+
-+ local_irq_save(flags);
-+
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ }
-+
-+ /* Enable the top level host channel interrupt. */
-+ intr_enable = (1 << hc->hc_num);
-+ DWC_MODIFY_REG32(&hcd->core_if->host_if->host_global_regs->haintmsk, 0, intr_enable);
-+
-+ /* Make sure host channel interrupts are enabled. */
-+ gintmsk.b.hcintr = 1;
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-+
-+ if (fiq_enable) {
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ }
-+
-+ local_irq_restore(flags);
-+ hc->qh = qh;
-+}
-+
-+
-+/**
-+ * fiq_fsm_transaction_suitable() - Test a QH for compatibility with the FIQ
-+ * @qh: pointer to the endpoint's queue head
-+ *
-+ * Transaction start/end control flow is grafted onto the existing dwc_otg
-+ * mechanisms, to avoid spaghettifying the functions more than they already are.
-+ * This function's eligibility check is altered by debug parameter.
-+ *
-+ * Returns: 0 for unsuitable, 1 implies the FIQ can be enabled for this transaction.
-+ */
-+
-+int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh)
-+{
-+ if (qh->do_split) {
-+ switch (qh->ep_type) {
-+ case UE_CONTROL:
-+ case UE_BULK:
-+ if (fiq_fsm_mask & (1 << 0))
-+ return 1;
-+ break;
-+ case UE_INTERRUPT:
-+ case UE_ISOCHRONOUS:
-+ if (fiq_fsm_mask & (1 << 1))
-+ return 1;
-+ break;
-+ default:
-+ break;
-+ }
-+ } else if (qh->ep_type == UE_ISOCHRONOUS) {
-+ if (fiq_fsm_mask & (1 << 2)) {
-+ /* HS ISOCH support. We test for compatibility:
-+ * - DWORD aligned buffers
-+ * - Must be at least 2 transfers (otherwise pointless to use the FIQ)
-+ * If yes, then the fsm enqueue function will handle the state machine setup.
-+ */
-+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+ struct dwc_otg_hcd_iso_packet_desc (*iso_descs)[0] = &urb->iso_descs;
-+ int nr_iso_frames = urb->packet_count;
-+ int i;
-+ uint32_t ptr;
-+
-+ if (nr_iso_frames < 2)
-+ return 0;
-+ for (i = 0; i < nr_iso_frames; i++) {
-+ ptr = urb->dma + iso_descs[i]->offset;
-+ if (ptr & 0x3) {
-+ printk_ratelimited("%s: Non-Dword aligned isochronous frame offset."
-+ " Cannot queue FIQ-accelerated transfer to device %d endpoint %d\n",
-+ __FUNCTION__, qh->channel->dev_addr, qh->channel->ep_num);
-+ return 0;
-+ }
-+ }
-+ return 1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * fiq_fsm_setup_periodic_dma() - Set up DMA bounce buffers
-+ * @hcd: Pointer to the dwc_otg_hcd struct
-+ * @qh: Pointer to the endpoint's queue head
-+ *
-+ * Periodic split transactions are transmitted modulo 188 bytes.
-+ * This necessitates slicing data up into buckets for isochronous out
-+ * and fixing up the DMA address for all IN transfers.
-+ *
-+ * Returns 1 if the DMA bounce buffers have been used, 0 if the default
-+ * HC buffer has been used.
-+ */
-+int fiq_fsm_setup_periodic_dma(dwc_otg_hcd_t *hcd, struct fiq_channel_state *st, dwc_otg_qh_t *qh)
-+ {
-+ int frame_length, i = 0;
-+ uint8_t *ptr = NULL;
-+ dwc_hc_t *hc = qh->channel;
-+ struct fiq_dma_blob *blob;
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc;
-+
-+ for (i = 0; i < 6; i++) {
-+ st->dma_info.slot_len[i] = 255;
-+ }
-+ st->dma_info.index = 0;
-+ i = 0;
-+ if (hc->ep_is_in) {
-+ /*
-+ * Set dma_regs to bounce buffer. FIQ will update the
-+ * state depending on transaction progress.
-+ */
-+ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base;
-+ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0];
-+ /* Calculate the max number of CSPLITS such that the FIQ can time out
-+ * a transaction if it fails.
-+ */
-+ frame_length = st->hcchar_copy.b.mps;
-+ do {
-+ i++;
-+ frame_length -= 188;
-+ } while (frame_length >= 0);
-+ st->nrpackets = i;
-+ return 1;
-+ } else {
-+ if (qh->ep_type == UE_ISOCHRONOUS) {
-+
-+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-+
-+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+ frame_length = frame_desc->length;
-+
-+ /* Virtual address for bounce buffers */
-+ blob = hcd->fiq_dmab;
-+
-+ ptr = qtd->urb->buf + frame_desc->offset;
-+ if (frame_length == 0) {
-+ /*
-+ * for isochronous transactions, we must still transmit a packet
-+ * even if the length is zero.
-+ */
-+ st->dma_info.slot_len[0] = 0;
-+ st->nrpackets = 1;
-+ } else {
-+ do {
-+ if (frame_length <= 188) {
-+ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, frame_length);
-+ st->dma_info.slot_len[i] = frame_length;
-+ ptr += frame_length;
-+ } else {
-+ dwc_memcpy(&blob->channel[hc->hc_num].index[i].buf[0], ptr, 188);
-+ st->dma_info.slot_len[i] = 188;
-+ ptr += 188;
-+ }
-+ i++;
-+ frame_length -= 188;
-+ } while (frame_length > 0);
-+ st->nrpackets = i;
-+ }
-+ ptr = qtd->urb->buf + frame_desc->offset;
-+ /* Point the HC at the DMA address of the bounce buffers */
-+ blob = (struct fiq_dma_blob *) hcd->fiq_state->dma_base;
-+ st->hcdma_copy.d32 = (uint32_t) &blob->channel[hc->hc_num].index[0].buf[0];
-+
-+ /* fixup xfersize to the actual packet size */
-+ st->hctsiz_copy.b.pid = 0;
-+ st->hctsiz_copy.b.xfersize = st->dma_info.slot_len[0];
-+ return 1;
-+ } else {
-+ /* For interrupt, single OUT packet required, goes in the SSPLIT from hc_buff. */
-+ return 0;
-+ }
-+ }
-+}
-+
-+/*
-+ * Pushing a periodic request into the queue near the EOF1 point
-+ * in a microframe causes erroneous behaviour (frmovrun) interrupt.
-+ * Usually, the request goes out on the bus causing a transfer but
-+ * the core does not transfer the data to memory.
-+ * This guard interval (in number of 60MHz clocks) is required which
-+ * must cater for CPU latency between reading the value and enabling
-+ * the channel.
-+ */
-+#define PERIODIC_FRREM_BACKOFF 1000
-+
-+int fiq_fsm_queue_isoc_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ dwc_hc_t *hc = qh->channel;
-+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
-+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-+ int frame;
-+ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num];
-+ int xfer_len, nrpackets;
-+ hcdma_data_t hcdma;
-+ hfnum_data_t hfnum;
-+
-+ if (st->fsm != FIQ_PASSTHROUGH)
-+ return 0;
-+
-+ st->nr_errors = 0;
-+
-+ st->hcchar_copy.d32 = 0;
-+ st->hcchar_copy.b.mps = hc->max_packet;
-+ st->hcchar_copy.b.epdir = hc->ep_is_in;
-+ st->hcchar_copy.b.devaddr = hc->dev_addr;
-+ st->hcchar_copy.b.epnum = hc->ep_num;
-+ st->hcchar_copy.b.eptype = hc->ep_type;
-+
-+ st->hcintmsk_copy.b.chhltd = 1;
-+
-+ frame = dwc_otg_hcd_get_frame_number(hcd);
-+ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1;
-+
-+ st->hcchar_copy.b.lspddev = 0;
-+ /* Enable the channel later as a final register write. */
-+
-+ st->hcsplt_copy.d32 = 0;
-+
-+ st->hs_isoc_info.iso_desc = (struct dwc_otg_hcd_iso_packet_desc *) &qtd->urb->iso_descs;
-+ st->hs_isoc_info.nrframes = qtd->urb->packet_count;
-+ /* grab the next DMA address offset from the array */
-+ st->hcdma_copy.d32 = qtd->urb->dma;
-+ hcdma.d32 = st->hcdma_copy.d32 + st->hs_isoc_info.iso_desc[0].offset;
-+
-+ /* We need to set multi_count. This is a bit tricky - has to be set per-transaction as
-+ * the core needs to be told to send the correct number. Caution: for IN transfers,
-+ * this is always set to the maximum size of the endpoint. */
-+ xfer_len = st->hs_isoc_info.iso_desc[0].length;
-+ nrpackets = (xfer_len + st->hcchar_copy.b.mps - 1) / st->hcchar_copy.b.mps;
-+ if (nrpackets == 0)
-+ nrpackets = 1;
-+ st->hcchar_copy.b.multicnt = nrpackets;
-+ st->hctsiz_copy.b.pktcnt = nrpackets;
-+
-+ /* Initial PID also needs to be set */
-+ if (st->hcchar_copy.b.epdir == 0) {
-+ st->hctsiz_copy.b.xfersize = xfer_len;
-+ switch (st->hcchar_copy.b.multicnt) {
-+ case 1:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA0;
-+ break;
-+ case 2:
-+ case 3:
-+ st->hctsiz_copy.b.pid = DWC_PID_MDATA;
-+ break;
-+ }
-+
-+ } else {
-+ st->hctsiz_copy.b.xfersize = nrpackets * st->hcchar_copy.b.mps;
-+ switch (st->hcchar_copy.b.multicnt) {
-+ case 1:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA0;
-+ break;
-+ case 2:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA1;
-+ break;
-+ case 3:
-+ st->hctsiz_copy.b.pid = DWC_PID_DATA2;
-+ break;
-+ }
-+ }
-+
-+ st->hs_isoc_info.stride = qh->interval;
-+ st->uframe_sleeps = 0;
-+
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d ", hc->hc_num);
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcchar_copy.d32);
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32);
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32);
-+ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32);
-+ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) {
-+ /* Prevent queueing near EOF1. Bad things happen if a periodic
-+ * split transaction is queued very close to EOF. SOF interrupt handler
-+ * will wake this channel at the next interrupt.
-+ */
-+ st->fsm = FIQ_HS_ISOC_SLEEPING;
-+ st->uframe_sleeps = 1;
-+ } else {
-+ st->fsm = FIQ_HS_ISOC_TURBO;
-+ st->hcchar_copy.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
-+ }
-+ mb();
-+ st->hcchar_copy.b.chen = 0;
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ return 0;
-+}
-+
-+
-+/**
-+ * fiq_fsm_queue_split_transaction() - Set up a host channel and FIQ state
-+ * @hcd: Pointer to the dwc_otg_hcd struct
-+ * @qh: Pointer to the endpoint's queue head
-+ *
-+ * This overrides the dwc_otg driver's normal method of queueing a transaction.
-+ * Called from dwc_otg_hcd_queue_transactions(), this performs specific setup
-+ * for the nominated host channel.
-+ *
-+ * For periodic transfers, it also peeks at the FIQ state to see if an immediate
-+ * start is possible. If not, then the FIQ is left to start the transfer.
-+ */
-+int fiq_fsm_queue_split_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh)
-+{
-+ int start_immediate = 1, i;
-+ hfnum_data_t hfnum;
-+ dwc_hc_t *hc = qh->channel;
-+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
-+ /* Program HC registers, setup FIQ_state, examine FIQ if periodic, start transfer (not if uframe 5) */
-+ int hub_addr, port_addr, frame, uframe;
-+ struct fiq_channel_state *st = &hcd->fiq_state->channel[hc->hc_num];
-+
-+ if (st->fsm != FIQ_PASSTHROUGH)
-+ return 0;
-+ st->nr_errors = 0;
-+
-+ st->hcchar_copy.d32 = 0;
-+ st->hcchar_copy.b.mps = hc->max_packet;
-+ st->hcchar_copy.b.epdir = hc->ep_is_in;
-+ st->hcchar_copy.b.devaddr = hc->dev_addr;
-+ st->hcchar_copy.b.epnum = hc->ep_num;
-+ st->hcchar_copy.b.eptype = hc->ep_type;
-+ if (hc->ep_type & 0x1) {
-+ if (hc->ep_is_in)
-+ st->hcchar_copy.b.multicnt = 3;
-+ else
-+ /* Docs say set this to 1, but driver sets to 0! */
-+ st->hcchar_copy.b.multicnt = 0;
-+ } else {
-+ st->hcchar_copy.b.multicnt = 1;
-+ st->hcchar_copy.b.oddfrm = 0;
-+ }
-+ st->hcchar_copy.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW) ? 1 : 0;
-+ /* Enable the channel later as a final register write. */
-+
-+ st->hcsplt_copy.d32 = 0;
-+ if(qh->do_split) {
-+ hcd->fops->hub_info(hcd, DWC_CIRCLEQ_FIRST(&qh->qtd_list)->urb->priv, &hub_addr, &port_addr);
-+ st->hcsplt_copy.b.compsplt = 0;
-+ st->hcsplt_copy.b.spltena = 1;
-+ // XACTPOS is for isoc-out only but needs initialising anyway.
-+ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_ALL;
-+ if((qh->ep_type == DWC_OTG_EP_TYPE_ISOC) && (!qh->ep_is_in)) {
-+ /* For packetsize 0 < L < 188, ISOC_XACTPOS_ALL.
-+ * for longer than this, ISOC_XACTPOS_BEGIN and the FIQ
-+ * will update as necessary.
-+ */
-+ if (hc->xfer_len > 188) {
-+ st->hcsplt_copy.b.xactpos = ISOC_XACTPOS_BEGIN;
-+ }
-+ }
-+ st->hcsplt_copy.b.hubaddr = (uint8_t) hub_addr;
-+ st->hcsplt_copy.b.prtaddr = (uint8_t) port_addr;
-+ st->hub_addr = hub_addr;
-+ st->port_addr = port_addr;
-+ }
-+
-+ st->hctsiz_copy.d32 = 0;
-+ st->hctsiz_copy.b.dopng = 0;
-+ st->hctsiz_copy.b.pid = hc->data_pid_start;
-+
-+ if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
-+ hc->xfer_len = hc->max_packet;
-+ } else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
-+ hc->xfer_len = 188;
-+ }
-+ st->hctsiz_copy.b.xfersize = hc->xfer_len;
-+
-+ st->hctsiz_copy.b.pktcnt = 1;
-+
-+ if (hc->ep_type & 0x1) {
-+ /*
-+ * For potentially multi-packet transfers, must use the DMA bounce buffers. For IN transfers,
-+ * the DMA address is the address of the first 188byte slot buffer in the bounce buffer array.
-+ * For multi-packet OUT transfers, we need to copy the data into the bounce buffer array so the FIQ can punt
-+ * the right address out as necessary. hc->xfer_buff and hc->xfer_len have already been set
-+ * in assign_and_init_hc(), but this is for the eventual transaction completion only. The FIQ
-+ * must not touch internal driver state.
-+ */
-+ if(!fiq_fsm_setup_periodic_dma(hcd, st, qh)) {
-+ if (hc->align_buff) {
-+ st->hcdma_copy.d32 = hc->align_buff;
-+ } else {
-+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF);
-+ }
-+ }
-+ } else {
-+ if (hc->align_buff) {
-+ st->hcdma_copy.d32 = hc->align_buff;
-+ } else {
-+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF);
-+ }
-+ }
-+ /* The FIQ depends upon no other interrupts being enabled except channel halt.
-+ * Fixup channel interrupt mask. */
-+ st->hcintmsk_copy.d32 = 0;
-+ st->hcintmsk_copy.b.chhltd = 1;
-+ st->hcintmsk_copy.b.ahberr = 1;
-+
-+ /* Hack courtesy of FreeBSD: apparently forcing Interrupt Split transactions
-+ * as Control puts the transfer into the non-periodic request queue and the
-+ * non-periodic handler in the hub. Makes things lots easier.
-+ */
-+ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT) {
-+ st->hcchar_copy.b.multicnt = 0;
-+ st->hcchar_copy.b.oddfrm = 0;
-+ st->hcchar_copy.b.eptype = UE_CONTROL;
-+ if (hc->align_buff) {
-+ st->hcdma_copy.d32 = hc->align_buff;
-+ } else {
-+ st->hcdma_copy.d32 = ((unsigned long) hc->xfer_buff & 0xFFFFFFFF);
-+ }
-+ }
-+ DWC_WRITE_REG32(&hc_regs->hcdma, st->hcdma_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, st->hctsiz_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcsplt, st->hcsplt_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, st->hcintmsk_copy.d32);
-+
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+
-+ if (hc->ep_type & 0x1) {
-+ hfnum.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+ frame = (hfnum.b.frnum & ~0x7) >> 3;
-+ uframe = hfnum.b.frnum & 0x7;
-+ if (hfnum.b.frrem < PERIODIC_FRREM_BACKOFF) {
-+ /* Prevent queueing near EOF1. Bad things happen if a periodic
-+ * split transaction is queued very close to EOF.
-+ */
-+ start_immediate = 0;
-+ } else if (uframe == 5) {
-+ start_immediate = 0;
-+ } else if (hc->ep_type == UE_ISOCHRONOUS && !hc->ep_is_in) {
-+ start_immediate = 0;
-+ } else if (hc->ep_is_in && fiq_fsm_too_late(hcd->fiq_state, hc->hc_num)) {
-+ start_immediate = 0;
-+ } else {
-+ /* Search through all host channels to determine if a transaction
-+ * is currently in progress */
-+ for (i = 0; i < hcd->core_if->core_params->host_channels; i++) {
-+ if (i == hc->hc_num || hcd->fiq_state->channel[i].fsm == FIQ_PASSTHROUGH)
-+ continue;
-+ switch (hcd->fiq_state->channel[i].fsm) {
-+ /* TT is reserved for channels that are in the middle of a periodic
-+ * split transaction.
-+ */
-+ case FIQ_PER_SSPLIT_STARTED:
-+ case FIQ_PER_CSPLIT_WAIT:
-+ case FIQ_PER_CSPLIT_NYET1:
-+ case FIQ_PER_CSPLIT_POLL:
-+ case FIQ_PER_ISO_OUT_ACTIVE:
-+ case FIQ_PER_ISO_OUT_LAST:
-+ if (hcd->fiq_state->channel[i].hub_addr == hub_addr &&
-+ hcd->fiq_state->channel[i].port_addr == port_addr) {
-+ start_immediate = 0;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+ if (!start_immediate)
-+ break;
-+ }
-+ }
-+ }
-+ if ((fiq_fsm_mask & 0x8) && hc->ep_type == UE_INTERRUPT)
-+ start_immediate = 1;
-+
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "FSMQ %01d %01d", hc->hc_num, start_immediate);
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "%08d", hfnum.b.frrem);
-+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "H:%02dP:%02d", hub_addr, port_addr);
-+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hctsiz_copy.d32);
-+ //fiq_print(FIQDBG_INT, hcd->fiq_state, "%08x", st->hcdma_copy.d32);
-+ switch (hc->ep_type) {
-+ case UE_CONTROL:
-+ case UE_BULK:
-+ st->fsm = FIQ_NP_SSPLIT_STARTED;
-+ break;
-+ case UE_ISOCHRONOUS:
-+ if (hc->ep_is_in) {
-+ if (start_immediate) {
-+ st->fsm = FIQ_PER_SSPLIT_STARTED;
-+ } else {
-+ st->fsm = FIQ_PER_SSPLIT_QUEUED;
-+ }
-+ } else {
-+ if (start_immediate) {
-+ /* Single-isoc OUT packets don't require FIQ involvement */
-+ if (st->nrpackets == 1) {
-+ st->fsm = FIQ_PER_ISO_OUT_LAST;
-+ } else {
-+ st->fsm = FIQ_PER_ISO_OUT_ACTIVE;
-+ }
-+ } else {
-+ st->fsm = FIQ_PER_ISO_OUT_PENDING;
-+ }
-+ }
-+ break;
-+ case UE_INTERRUPT:
-+ if (fiq_fsm_mask & 0x8) {
-+ st->fsm = FIQ_NP_SSPLIT_STARTED;
-+ } else if (start_immediate) {
-+ st->fsm = FIQ_PER_SSPLIT_STARTED;
-+ } else {
-+ st->fsm = FIQ_PER_SSPLIT_QUEUED;
-+ }
-+ default:
-+ break;
-+ }
-+ if (start_immediate) {
-+ /* Set the oddfrm bit as close as possible to actual queueing */
-+ frame = dwc_otg_hcd_get_frame_number(hcd);
-+ st->expected_uframe = (frame + 1) & 0x3FFF;
-+ st->hcchar_copy.b.oddfrm = (frame & 0x1) ? 0 : 1;
-+ st->hcchar_copy.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, st->hcchar_copy.d32);
-+ }
-+ mb();
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ return 0;
-+}
-+
-+
-+/**
-+ * This function selects transactions from the HCD transfer schedule and
-+ * assigns them to available host channels. It is called from HCD interrupt
-+ * handler functions.
-+ *
-+ * @param hcd The HCD state structure.
-+ *
-+ * @return The types of new transactions that were assigned to host channels.
-+ */
-+dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
-+{
-+ dwc_list_link_t *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int num_channels;
-+ dwc_irqflags_t flags;
-+ dwc_spinlock_t *channel_lock = hcd->channel_lock;
-+ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
-+
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_per_scheduled = 0;
-+ last_sel_trans_num_nonper_scheduled = 0;
-+ last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels;
-+#endif /* DEBUG_HOST_CHANNELS */
-+
-+ /* Process entries in the periodic ready list. */
-+ qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready);
-+
-+ while (qh_ptr != &hcd->periodic_sched_ready &&
-+ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
-+
-+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+
-+ if (microframe_schedule) {
-+ // Make sure we leave one channel for non periodic transactions.
-+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
-+ if (hcd->available_host_channels <= 1) {
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+ break;
-+ }
-+ hcd->available_host_channels--;
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_per_scheduled++;
-+#endif /* DEBUG_HOST_CHANNELS */
-+ }
-+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ assign_and_init_hc(hcd, qh);
-+
-+ /*
-+ * Move the QH from the periodic ready schedule to the
-+ * periodic assigned schedule.
-+ */
-+ qh_ptr = DWC_LIST_NEXT(qh_ptr);
-+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
-+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
-+ &qh->qh_list_entry);
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+ }
-+
-+ /*
-+ * Process entries in the inactive portion of the non-periodic
-+ * schedule. Some free host channels may not be used if they are
-+ * reserved for periodic transfers.
-+ */
-+ qh_ptr = hcd->non_periodic_sched_inactive.next;
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ while (qh_ptr != &hcd->non_periodic_sched_inactive &&
-+ (microframe_schedule || hcd->non_periodic_channels <
-+ num_channels - hcd->periodic_channels) &&
-+ !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
-+
-+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ /*
-+ * Check to see if this is a NAK'd retransmit, in which case ignore for retransmission
-+ * we hold off on bulk retransmissions to reduce NAK interrupt overhead for full-speed
-+ * cheeky devices that just hold off using NAKs
-+ */
-+ if (fiq_enable && nak_holdoff && qh->do_split) {
-+ if (qh->nak_frame != 0xffff) {
-+ uint16_t next_frame = dwc_frame_num_inc(qh->nak_frame, (qh->ep_type == UE_BULK) ? nak_holdoff : 8);
-+ uint16_t frame = dwc_otg_hcd_get_frame_number(hcd);
-+ if (dwc_frame_num_le(frame, next_frame)) {
-+ if(dwc_frame_num_le(next_frame, hcd->fiq_state->next_sched_frame)) {
-+ hcd->fiq_state->next_sched_frame = next_frame;
-+ }
-+ qh_ptr = DWC_LIST_NEXT(qh_ptr);
-+ continue;
-+ } else {
-+ qh->nak_frame = 0xFFFF;
-+ }
-+ }
-+ }
-+
-+ if (microframe_schedule) {
-+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
-+ if (hcd->available_host_channels < 1) {
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+ break;
-+ }
-+ hcd->available_host_channels--;
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_nonper_scheduled++;
-+#endif /* DEBUG_HOST_CHANNELS */
-+ }
-+
-+ assign_and_init_hc(hcd, qh);
-+
-+ /*
-+ * Move the QH from the non-periodic inactive schedule to the
-+ * non-periodic active schedule.
-+ */
-+ qh_ptr = DWC_LIST_NEXT(qh_ptr);
-+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
-+ DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active,
-+ &qh->qh_list_entry);
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+
-+
-+ if (!microframe_schedule)
-+ hcd->non_periodic_channels++;
-+ }
-+ /* we moved a non-periodic QH to the active schedule. If the inactive queue is empty,
-+ * stop the FIQ from kicking us. We could potentially still have elements here if we
-+ * ran out of host channels.
-+ */
-+ if (fiq_enable) {
-+ if (DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive)) {
-+ hcd->fiq_state->kick_np_queues = 0;
-+ } else {
-+ /* For each entry remaining in the NP inactive queue,
-+ * if this a NAK'd retransmit then don't set the kick flag.
-+ */
-+ if(nak_holdoff) {
-+ DWC_LIST_FOREACH(qh_ptr, &hcd->non_periodic_sched_inactive) {
-+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+ if (qh->nak_frame == 0xFFFF) {
-+ hcd->fiq_state->kick_np_queues = 1;
-+ }
-+ }
-+ }
-+ }
-+ }
-+ if(!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned))
-+ ret_val |= DWC_OTG_TRANSACTION_PERIODIC;
-+
-+ if(!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active))
-+ ret_val |= DWC_OTG_TRANSACTION_NON_PERIODIC;
-+
-+
-+#ifdef DEBUG_HOST_CHANNELS
-+ last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels;
-+#endif /* DEBUG_HOST_CHANNELS */
-+ return ret_val;
-+}
-+
-+/**
-+ * Attempts to queue a single transaction request for a host channel
-+ * associated with either a periodic or non-periodic transfer. This function
-+ * assumes that there is space available in the appropriate request queue. For
-+ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
-+ * is available in the appropriate Tx FIFO.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param hc Host channel descriptor associated with either a periodic or
-+ * non-periodic transfer.
-+ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
-+ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
-+ * transfers.
-+ *
-+ * @return 1 if a request is queued and more requests may be needed to
-+ * complete the transfer, 0 if no more requests are required for this
-+ * transfer, -1 if there is insufficient space in the Tx FIFO.
-+ */
-+static int queue_transaction(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc, uint16_t fifo_dwords_avail)
-+{
-+ int retval;
-+
-+ if (hcd->core_if->dma_enable) {
-+ if (hcd->core_if->dma_desc_enable) {
-+ if (!hc->xfer_started
-+ || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
-+ dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh);
-+ hc->qh->ping_state = 0;
-+ }
-+ } else if (!hc->xfer_started) {
-+ if (fiq_fsm_enable && hc->error_state) {
-+ hcd->fiq_state->channel[hc->hc_num].nr_errors =
-+ DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list)->error_count;
-+ hcd->fiq_state->channel[hc->hc_num].fsm =
-+ FIQ_PASSTHROUGH_ERRORSTATE;
-+ }
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ hc->qh->ping_state = 0;
-+ }
-+ retval = 0;
-+ } else if (hc->halt_pending) {
-+ /* Don't queue a request if the channel has been halted. */
-+ retval = 0;
-+ } else if (hc->halt_on_queue) {
-+ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
-+ retval = 0;
-+ } else if (hc->do_ping) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ }
-+ retval = 0;
-+ } else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
-+ if ((fifo_dwords_avail * 4) >= hc->max_packet) {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ retval = 1;
-+ } else {
-+ retval =
-+ dwc_otg_hc_continue_transfer(hcd->core_if,
-+ hc);
-+ }
-+ } else {
-+ retval = -1;
-+ }
-+ } else {
-+ if (!hc->xfer_started) {
-+ dwc_otg_hc_start_transfer(hcd->core_if, hc);
-+ retval = 1;
-+ } else {
-+ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Processes periodic channels for the next frame and queues transactions for
-+ * these channels to the DWC_otg controller. After queueing transactions, the
-+ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
-+ * to queue as Periodic Tx FIFO or request queue space becomes available.
-+ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
-+ */
-+static void process_periodic_channels(dwc_otg_hcd_t * hcd)
-+{
-+ hptxsts_data_t tx_status;
-+ dwc_list_link_t *qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status = 0;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+
-+ dwc_otg_host_global_regs_t *host_regs;
-+ host_regs = hcd->core_if->host_if->host_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " P Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+
-+ qh_ptr = hcd->periodic_sched_assigned.next;
-+ while (qh_ptr != &hcd->periodic_sched_assigned) {
-+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
-+ if (tx_status.b.ptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
-+
-+ // Do not send a split start transaction any later than frame .6
-+ // Note, we have to schedule a periodic in .5 to make it go in .6
-+ if(fiq_fsm_enable && qh->do_split && ((dwc_otg_hcd_get_frame_number(hcd) + 1) & 7) > 6)
-+ {
-+ qh_ptr = qh_ptr->next;
-+ hcd->fiq_state->next_sched_frame = dwc_otg_hcd_get_frame_number(hcd) | 7;
-+ continue;
-+ }
-+
-+ if (fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) {
-+ if (qh->do_split)
-+ fiq_fsm_queue_split_transaction(hcd, qh);
-+ else
-+ fiq_fsm_queue_isoc_transaction(hcd, qh);
-+ } else {
-+
-+ /*
-+ * Set a flag if we're queueing high-bandwidth in slave mode.
-+ * The flag prevents any halts to get into the request queue in
-+ * the middle of multiple high-bandwidth packets getting queued.
-+ */
-+ if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) {
-+ hcd->core_if->queuing_high_bandwidth = 1;
-+ }
-+ status = queue_transaction(hcd, qh->channel,
-+ tx_status.b.ptxfspcavail);
-+ if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+ }
-+
-+ /*
-+ * In Slave mode, stay on the current transfer until there is
-+ * nothing more to do or the high-bandwidth request count is
-+ * reached. In DMA mode, only need to queue one request. The
-+ * controller automatically handles multiple packets for
-+ * high-bandwidth transfers.
-+ */
-+ if (hcd->core_if->dma_enable || status == 0 ||
-+ qh->channel->requests == qh->channel->multi_count) {
-+ qh_ptr = qh_ptr->next;
-+ /*
-+ * Move the QH from the periodic assigned schedule to
-+ * the periodic queued schedule.
-+ */
-+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued,
-+ &qh->qh_list_entry);
-+
-+ /* done queuing high bandwidth */
-+ hcd->core_if->queuing_high_bandwidth = 0;
-+ }
-+ }
-+
-+ if (!hcd->core_if->dma_enable) {
-+ dwc_otg_core_global_regs_t *global_regs;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ global_regs = hcd->core_if->core_global_regs;
-+ intr_mask.b.ptxfempty = 1;
-+#ifdef DEBUG
-+ tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " P Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.ptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " P Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.ptxfspcavail);
-+#endif
-+ if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) ||
-+ no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the periodic Tx
-+ * FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
-+ intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
-+ 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * Processes active non-periodic channels and queues transactions for these
-+ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
-+ * FIFO Empty interrupt is enabled if there are more transactions to queue as
-+ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
-+ * FIFO Empty interrupt is disabled.
-+ */
-+static void process_non_periodic_channels(dwc_otg_hcd_t * hcd)
-+{
-+ gnptxsts_data_t tx_status;
-+ dwc_list_link_t *orig_qh_ptr;
-+ dwc_otg_qh_t *qh;
-+ int status;
-+ int no_queue_space = 0;
-+ int no_fifo_space = 0;
-+ int more_to_do = 0;
-+
-+ dwc_otg_core_global_regs_t *global_regs =
-+ hcd->core_if->core_global_regs;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
-+#ifdef DEBUG
-+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " NP Tx Req Queue Space Avail (before queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ /*
-+ * Keep track of the starting point. Skip over the start-of-list
-+ * entry.
-+ */
-+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ }
-+ orig_qh_ptr = hcd->non_periodic_qh_ptr;
-+
-+ /*
-+ * Process once through the active list or until no more space is
-+ * available in the request queue or the Tx FIFO.
-+ */
-+ do {
-+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
-+ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
-+ no_queue_space = 1;
-+ break;
-+ }
-+
-+ qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t,
-+ qh_list_entry);
-+
-+ if(fiq_fsm_enable && fiq_fsm_transaction_suitable(qh)) {
-+ fiq_fsm_queue_split_transaction(hcd, qh);
-+ } else {
-+ status = queue_transaction(hcd, qh->channel,
-+ tx_status.b.nptxfspcavail);
-+
-+ if (status > 0) {
-+ more_to_do = 1;
-+ } else if (status < 0) {
-+ no_fifo_space = 1;
-+ break;
-+ }
-+ }
-+ /* Advance to next QH, skipping start-of-list entry. */
-+ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
-+ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
-+ hcd->non_periodic_qh_ptr =
-+ hcd->non_periodic_qh_ptr->next;
-+ }
-+
-+ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
-+
-+ if (!hcd->core_if->dma_enable) {
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ intr_mask.b.nptxfempty = 1;
-+
-+#ifdef DEBUG
-+ tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " NP Tx Req Queue Space Avail (after queue): %d\n",
-+ tx_status.b.nptxqspcavail);
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " NP Tx FIFO Space Avail (after queue): %d\n",
-+ tx_status.b.nptxfspcavail);
-+#endif
-+ if (more_to_do || no_queue_space || no_fifo_space) {
-+ /*
-+ * May need to queue more transactions as the request
-+ * queue or Tx FIFO empties. Enable the non-periodic
-+ * Tx FIFO empty interrupt. (Always use the half-empty
-+ * level to ensure that new requests are loaded as
-+ * soon as possible.)
-+ */
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
-+ intr_mask.d32);
-+ } else {
-+ /*
-+ * Disable the Tx FIFO empty interrupt since there are
-+ * no more transactions that need to be queued right
-+ * now. This function is called from interrupt
-+ * handlers to queue more transactions as transfer
-+ * states change.
-+ */
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
-+ 0);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function processes the currently active host channels and queues
-+ * transactions for these channels to the DWC_otg controller. It is called
-+ * from HCD interrupt handler functions.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param tr_type The type(s) of transactions to queue (non-periodic,
-+ * periodic, or both).
-+ */
-+void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
-+ dwc_otg_transaction_type_e tr_type)
-+{
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
-+#endif
-+ /* Process host channels associated with periodic transfers. */
-+ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
-+ tr_type == DWC_OTG_TRANSACTION_ALL) &&
-+ !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) {
-+
-+ process_periodic_channels(hcd);
-+ }
-+
-+ /* Process host channels associated with non-periodic transfers. */
-+ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
-+ tr_type == DWC_OTG_TRANSACTION_ALL) {
-+ if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) {
-+ process_non_periodic_channels(hcd);
-+ } else {
-+ /*
-+ * Ensure NP Tx FIFO empty interrupt is disabled when
-+ * there are no non-periodic transfers to process.
-+ */
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+ gintmsk.b.nptxfempty = 1;
-+
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ } else {
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+ }
-+ }
-+ }
-+}
-+
-+#ifdef DWC_HS_ELECT_TST
-+/*
-+ * Quick and dirty hack to implement the HS Electrical Test
-+ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
-+ *
-+ * This code was copied from our userspace app "hset". It sends a
-+ * Get Device Descriptor control sequence in two parts, first the
-+ * Setup packet by itself, followed some time later by the In and
-+ * Ack packets. Rather than trying to figure out how to add this
-+ * functionality to the normal driver code, we just hijack the
-+ * hardware, using these two function to drive the hardware
-+ * directly.
-+ */
-+
-+static dwc_otg_core_global_regs_t *global_regs;
-+static dwc_otg_host_global_regs_t *hc_global_regs;
-+static dwc_otg_hc_regs_t *hc_regs;
-+static uint32_t *data_fifo;
-+
-+static void do_setup(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+
-+ /* Enable HAINTs */
-+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /*
-+ * Send Setup packet (Get Device Descriptor)
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chdis = 1;
-+// hcchar.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ dwc_mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+
-+ /* Fill FIFO with Setup data for Get Device Descriptor */
-+ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
-+ DWC_WRITE_REG32(data_fifo++, 0x01000680);
-+ DWC_WRITE_REG32(data_fifo++, 0x00080000);
-+
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ /* Disable HCINTs */
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+}
-+
-+static void do_in_ack(void)
-+{
-+ gintsts_data_t gintsts;
-+ hctsiz_data_t hctsiz;
-+ hcchar_data_t hcchar;
-+ haint_data_t haint;
-+ hcint_data_t hcint;
-+ host_grxsts_data_t grxsts;
-+
-+ /* Enable HAINTs */
-+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
-+
-+ /* Enable HCINTs */
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /*
-+ * Receive Control In packet
-+ */
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ dwc_mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 8;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 1;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer */
-+ if (grxsts.b.bcnt > 0) {
-+ int i;
-+ int word_count = (grxsts.b.bcnt + 3) / 4;
-+
-+ data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
-+
-+ for (i = 0; i < word_count; i++) {
-+ (void)DWC_READ_REG32(data_fifo++);
-+ }
-+ }
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Wait for receive status queue interrupt */
-+ do {
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+ } while (gintsts.b.rxstsqlvl == 0);
-+
-+ /* Read RXSTS */
-+ grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
-+
-+ /* Clear RXSTSQLVL in GINTSTS */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ break;
-+
-+ default:
-+ break;
-+ }
-+
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+// usleep(100000);
-+// mdelay(100);
-+ dwc_mdelay(1);
-+
-+ /*
-+ * Send handshake packet
-+ */
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Make sure channel is disabled */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chen) {
-+ hcchar.b.chdis = 1;
-+ hcchar.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+ //sleep(1);
-+ dwc_mdelay(1000);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ }
-+
-+ /* Set HCTSIZ */
-+ hctsiz.d32 = 0;
-+ hctsiz.b.xfersize = 0;
-+ hctsiz.b.pktcnt = 1;
-+ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
-+ DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
-+
-+ /* Set HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.epdir = 0;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.mps = 8;
-+ hcchar.b.chen = 1;
-+ DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
-+
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+
-+ /* Wait for host channel interrupt */
-+ do {
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+ } while (gintsts.b.hcintr == 0);
-+
-+ /* Disable HCINTs */
-+ DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
-+
-+ /* Disable HAINTs */
-+ DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
-+
-+ /* Read HAINT */
-+ haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
-+
-+ /* Read HCINT */
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+
-+ /* Read HCCHAR */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+
-+ /* Clear HCINT */
-+ DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
-+
-+ /* Clear HAINT */
-+ DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
-+
-+ /* Clear GINTSTS */
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ /* Read GINTSTS */
-+ gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
-+}
-+#endif
-+
-+/** Handles hub class-specific requests. */
-+int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
-+ uint16_t typeReq,
-+ uint16_t wValue,
-+ uint16_t wIndex, uint8_t * buf, uint16_t wLength)
-+{
-+ int retval = 0;
-+
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ usb_hub_descriptor_t *hub_desc;
-+ hprt0_data_t hprt0 = {.d32 = 0 };
-+
-+ uint32_t port_status;
-+
-+ switch (typeReq) {
-+ case UCR_CLEAR_HUB_FEATURE:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearHubFeature 0x%x\n", wValue);
-+ switch (wValue) {
-+ case UHF_C_HUB_LOCAL_POWER:
-+ case UHF_C_HUB_OVER_CURRENT:
-+ /* Nothing required here */
-+ break;
-+ default:
-+ retval = -DWC_E_INVALID;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "ClearHubFeature request %xh unknown\n",
-+ wValue);
-+ }
-+ break;
-+ case UCR_CLEAR_PORT_FEATURE:
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ if (wValue != UHF_PORT_L1)
-+#endif
-+ if (!wIndex || wIndex > 1)
-+ goto error;
-+
-+ switch (wValue) {
-+ case UHF_PORT_ENABLE:
-+ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtena = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case UHF_PORT_SUSPEND:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
-+
-+ if (core_if->power_down == 2) {
-+ dwc_otg_host_hibernation_restore(core_if, 0, 0);
-+ } else {
-+ DWC_WRITE_REG32(core_if->pcgcctl, 0);
-+ dwc_mdelay(5);
-+
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtres = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ hprt0.b.prtsusp = 0;
-+ /* Clear Resume bit */
-+ dwc_mdelay(100);
-+ hprt0.b.prtres = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ }
-+ break;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ case UHF_PORT_L1:
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ glpmcfg_data_t lpmcfg = {.d32 = 0 };
-+
-+ lpmcfg.d32 =
-+ DWC_READ_REG32(&core_if->
-+ core_global_regs->glpmcfg);
-+ lpmcfg.b.en_utmi_sleep = 0;
-+ lpmcfg.b.hird_thres &= (~(1 << 4));
-+ lpmcfg.b.prt_sleep_sts = 1;
-+ DWC_WRITE_REG32(&core_if->
-+ core_global_regs->glpmcfg,
-+ lpmcfg.d32);
-+
-+ /* Clear Enbl_L1Gating bit. */
-+ pcgcctl.b.enbl_sleep_gating = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32,
-+ 0);
-+
-+ dwc_mdelay(5);
-+
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtres = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0,
-+ hprt0.d32);
-+ /* This bit will be cleared in wakeup interrupt handle */
-+ break;
-+ }
-+#endif
-+ case UHF_PORT_POWER:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case UHF_PORT_INDICATOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
-+ /* Port inidicator not supported */
-+ break;
-+ case UHF_C_PORT_CONNECTION:
-+ /* Clears drivers internal connect status change
-+ * flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 0;
-+ break;
-+ case UHF_C_PORT_RESET:
-+ /* Clears the driver's internal Port Reset Change
-+ * flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
-+ dwc_otg_hcd->flags.b.port_reset_change = 0;
-+ break;
-+ case UHF_C_PORT_ENABLE:
-+ /* Clears the driver's internal Port
-+ * Enable/Disable Change flag */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
-+ dwc_otg_hcd->flags.b.port_enable_change = 0;
-+ break;
-+ case UHF_C_PORT_SUSPEND:
-+ /* Clears the driver's internal Port Suspend
-+ * Change flag, which is set when resume signaling on
-+ * the host port is complete */
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
-+ dwc_otg_hcd->flags.b.port_suspend_change = 0;
-+ break;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ case UHF_C_PORT_L1:
-+ dwc_otg_hcd->flags.b.port_l1_change = 0;
-+ break;
-+#endif
-+ case UHF_C_PORT_OVER_CURRENT:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
-+ dwc_otg_hcd->flags.b.port_over_current_change = 0;
-+ break;
-+ default:
-+ retval = -DWC_E_INVALID;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "ClearPortFeature request %xh "
-+ "unknown or unsupported\n", wValue);
-+ }
-+ break;
-+ case UCR_GET_HUB_DESCRIPTOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubDescriptor\n");
-+ hub_desc = (usb_hub_descriptor_t *) buf;
-+ hub_desc->bDescLength = 9;
-+ hub_desc->bDescriptorType = 0x29;
-+ hub_desc->bNbrPorts = 1;
-+ USETW(hub_desc->wHubCharacteristics, 0x08);
-+ hub_desc->bPwrOn2PwrGood = 1;
-+ hub_desc->bHubContrCurrent = 0;
-+ hub_desc->DeviceRemovable[0] = 0;
-+ hub_desc->DeviceRemovable[1] = 0xff;
-+ break;
-+ case UCR_GET_HUB_STATUS:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetHubStatus\n");
-+ DWC_MEMSET(buf, 0, 4);
-+ break;
-+ case UCR_GET_PORT_STATUS:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n",
-+ wIndex, dwc_otg_hcd->flags.d32);
-+ if (!wIndex || wIndex > 1)
-+ goto error;
-+
-+ port_status = 0;
-+
-+ if (dwc_otg_hcd->flags.b.port_connect_status_change)
-+ port_status |= (1 << UHF_C_PORT_CONNECTION);
-+
-+ if (dwc_otg_hcd->flags.b.port_enable_change)
-+ port_status |= (1 << UHF_C_PORT_ENABLE);
-+
-+ if (dwc_otg_hcd->flags.b.port_suspend_change)
-+ port_status |= (1 << UHF_C_PORT_SUSPEND);
-+
-+ if (dwc_otg_hcd->flags.b.port_l1_change)
-+ port_status |= (1 << UHF_C_PORT_L1);
-+
-+ if (dwc_otg_hcd->flags.b.port_reset_change) {
-+ port_status |= (1 << UHF_C_PORT_RESET);
-+ }
-+
-+ if (dwc_otg_hcd->flags.b.port_over_current_change) {
-+ DWC_WARN("Overcurrent change detected\n");
-+ port_status |= (1 << UHF_C_PORT_OVER_CURRENT);
-+ }
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return 0's for the remainder of the port status
-+ * since the port register can't be read if the core
-+ * is in device mode.
-+ */
-+ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
-+ break;
-+ }
-+
-+ hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
-+ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32);
-+
-+ if (hprt0.b.prtconnsts)
-+ port_status |= (1 << UHF_PORT_CONNECTION);
-+
-+ if (hprt0.b.prtena)
-+ port_status |= (1 << UHF_PORT_ENABLE);
-+
-+ if (hprt0.b.prtsusp)
-+ port_status |= (1 << UHF_PORT_SUSPEND);
-+
-+ if (hprt0.b.prtovrcurract)
-+ port_status |= (1 << UHF_PORT_OVER_CURRENT);
-+
-+ if (hprt0.b.prtrst)
-+ port_status |= (1 << UHF_PORT_RESET);
-+
-+ if (hprt0.b.prtpwr)
-+ port_status |= (1 << UHF_PORT_POWER);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
-+ port_status |= (1 << UHF_PORT_HIGH_SPEED);
-+ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
-+ port_status |= (1 << UHF_PORT_LOW_SPEED);
-+
-+ if (hprt0.b.prttstctl)
-+ port_status |= (1 << UHF_PORT_TEST);
-+ if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) {
-+ port_status |= (1 << UHF_PORT_L1);
-+ }
-+ /*
-+ For Synopsys HW emulation of Power down wkup_control asserts the
-+ hreset_n and prst_n on suspned. This causes the HPRT0 to be zero.
-+ We intentionally tell the software that port is in L2Suspend state.
-+ Only for STE.
-+ */
-+ if ((core_if->power_down == 2)
-+ && (core_if->hibernation_suspend == 1)) {
-+ port_status |= (1 << UHF_PORT_SUSPEND);
-+ }
-+ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */
-+
-+ *((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
-+
-+ break;
-+ case UCR_SET_HUB_FEATURE:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetHubFeature\n");
-+ /* No HUB features supported */
-+ break;
-+ case UCR_SET_PORT_FEATURE:
-+ if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1))
-+ goto error;
-+
-+ if (!dwc_otg_hcd->flags.b.port_connect_status) {
-+ /*
-+ * The port is disconnected, which means the core is
-+ * either in device mode or it soon will be. Just
-+ * return without doing anything since the port
-+ * register can't be written if the core is in device
-+ * mode.
-+ */
-+ break;
-+ }
-+
-+ switch (wValue) {
-+ case UHF_PORT_SUSPEND:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
-+ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) {
-+ goto error;
-+ }
-+ if (core_if->power_down == 2) {
-+ int timeout = 300;
-+ dwc_irqflags_t flags;
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ gusbcfg_data_t gusbcfg = {.d32 = 0 };
-+#ifdef DWC_DEV_SRPCAP
-+ int32_t otg_cap_param = core_if->core_params->otg_cap;
-+#endif
-+ DWC_PRINTF("Preparing for complete power-off\n");
-+
-+ /* Save registers before hibernation */
-+ dwc_otg_save_global_regs(core_if);
-+ dwc_otg_save_host_regs(core_if);
-+
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ hprt0.b.prtena = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ /* Spin hprt0.b.prtsusp to became 1 */
-+ do {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ if (hprt0.b.prtsusp) {
-+ break;
-+ }
-+ dwc_mdelay(1);
-+ } while (--timeout);
-+ if (!timeout) {
-+ DWC_WARN("Suspend wasn't genereted\n");
-+ }
-+ dwc_udelay(10);
-+
-+ /*
-+ * We need to disable interrupts to prevent servicing of any IRQ
-+ * during going to hibernation
-+ */
-+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
-+ core_if->lx_state = DWC_OTG_L2;
-+#ifdef DWC_DEV_SRPCAP
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 0;
-+ hprt0.b.prtena = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0,
-+ hprt0.d32);
-+#endif
-+ gusbcfg.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->
-+ gusbcfg);
-+ if (gusbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ /* Suspend the Phy Clock */
-+ pcgcctl.d32 = 0;
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0,
-+ pcgcctl.d32);
-+ dwc_udelay(10);
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ } else {
-+ /* UTMI+ Interface */
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
-+ dwc_udelay(10);
-+ }
-+#ifdef DWC_DEV_SRPCAP
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.dis_vbus = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+#endif
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ gpwrdn.d32 = 0;
-+#ifdef DWC_DEV_SRPCAP
-+ gpwrdn.b.srp_det_msk = 1;
-+#endif
-+ gpwrdn.b.disconn_det_msk = 1;
-+ gpwrdn.b.lnstchng_msk = 1;
-+ gpwrdn.b.sts_chngint_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Enable Power Down Clamp and all interrupts in GPWRDN */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnclmp = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+ dwc_udelay(10);
-+
-+ /* Switch off VDD */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+
-+#ifdef DWC_DEV_SRPCAP
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE)
-+ {
-+ core_if->pwron_timer_started = 1;
-+ DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ );
-+ }
-+#endif
-+ /* Save gpwrdn register for further usage if stschng interrupt */
-+ core_if->gr_backup->gpwrdn_local =
-+ DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
-+
-+ /* Set flag to indicate that we are in hibernation */
-+ core_if->hibernation_suspend = 1;
-+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags);
-+
-+ DWC_PRINTF("Host hibernation completed\n");
-+ // Exit from case statement
-+ break;
-+
-+ }
-+ if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex &&
-+ dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+ gotgctl.b.hstsethnpen = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gotgctl, 0, gotgctl.d32);
-+ core_if->op_state = A_SUSPEND;
-+ }
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ {
-+ dwc_irqflags_t flags;
-+ /* Update lx_state */
-+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
-+ core_if->lx_state = DWC_OTG_L2;
-+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
-+ }
-+ /* Suspend the Phy Clock */
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, 0,
-+ pcgcctl.d32);
-+ dwc_udelay(10);
-+ }
-+
-+ /* For HNP the bus must be suspended for at least 200ms. */
-+ if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ dwc_mdelay(200);
-+ }
-+
-+ /** @todo - check how sw can wait for 1 sec to check asesvld??? */
-+#if 0 //vahrama !!!!!!!!!!!!!!!!!!
-+ if (core_if->adp_enable) {
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+ gpwrdn_data_t gpwrdn;
-+
-+ while (gotgctl.b.asesvld == 1) {
-+ gotgctl.d32 =
-+ DWC_READ_REG32(&core_if->
-+ core_global_regs->
-+ gotgctl);
-+ dwc_mdelay(100);
-+ }
-+
-+ /* Enable Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+
-+ /* Unmask SRP detected interrupt from Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.srp_det_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->
-+ gpwrdn, 0, gpwrdn.d32);
-+
-+ dwc_otg_adp_probe_start(core_if);
-+ }
-+#endif
-+ break;
-+ case UHF_PORT_POWER:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_POWER\n");
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtpwr = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ break;
-+ case UHF_PORT_RESET:
-+ if ((core_if->power_down == 2)
-+ && (core_if->hibernation_suspend == 1)) {
-+ /* If we are going to exit from Hibernated
-+ * state via USB RESET.
-+ */
-+ dwc_otg_host_hibernation_restore(core_if, 0, 1);
-+ } else {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+
-+ DWC_DEBUGPL(DBG_HCD,
-+ "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_RESET\n");
-+ {
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ pcgcctl.b.enbl_sleep_gating = 1;
-+ pcgcctl.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
-+ DWC_WRITE_REG32(core_if->pcgcctl, 0);
-+ }
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ {
-+ glpmcfg_data_t lpmcfg;
-+ lpmcfg.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ if (lpmcfg.b.prt_sleep_sts) {
-+ lpmcfg.b.en_utmi_sleep = 0;
-+ lpmcfg.b.hird_thres &= (~(1 << 4));
-+ DWC_WRITE_REG32
-+ (&core_if->core_global_regs->glpmcfg,
-+ lpmcfg.d32);
-+ dwc_mdelay(1);
-+ }
-+ }
-+#endif
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ /* Clear suspend bit if resetting from suspended state. */
-+ hprt0.b.prtsusp = 0;
-+ /* When B-Host the Port reset bit is set in
-+ * the Start HCD Callback function, so that
-+ * the reset is started within 1ms of the HNP
-+ * success interrupt. */
-+ if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) {
-+ hprt0.b.prtpwr = 1;
-+ hprt0.b.prtrst = 1;
-+ DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32);
-+ DWC_WRITE_REG32(core_if->host_if->hprt0,
-+ hprt0.d32);
-+ }
-+ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
-+ dwc_mdelay(60);
-+ hprt0.b.prtrst = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ core_if->lx_state = DWC_OTG_L0; /* Now back to the on state */
-+ }
-+ break;
-+#ifdef DWC_HS_ELECT_TST
-+ case UHF_PORT_TEST:
-+ {
-+ uint32_t t;
-+ gintmsk_data_t gintmsk;
-+
-+ t = (wIndex >> 8); /* MSB wIndex USB */
-+ DWC_DEBUGPL(DBG_HCD,
-+ "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_TEST %d\n",
-+ t);
-+ DWC_WARN("USB_PORT_FEAT_TEST %d\n", t);
-+ if (t < 6) {
-+ hprt0.d32 = dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prttstctl = t;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0,
-+ hprt0.d32);
-+ } else {
-+ /* Setup global vars with reg addresses (quick and
-+ * dirty hack, should be cleaned up)
-+ */
-+ global_regs = core_if->core_global_regs;
-+ hc_global_regs =
-+ core_if->host_if->host_global_regs;
-+ hc_regs =
-+ (dwc_otg_hc_regs_t *) ((char *)
-+ global_regs +
-+ 0x500);
-+ data_fifo =
-+ (uint32_t *) ((char *)global_regs +
-+ 0x1000);
-+
-+ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 =
-+ DWC_READ_REG32
-+ (&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ dwc_mdelay(15000);
-+
-+ /* Drive suspend on the root port */
-+ hprt0.d32 =
-+ dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 1;
-+ hprt0.b.prtres = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* 15 second delay per the test spec */
-+ dwc_mdelay(15000);
-+
-+ /* Drive resume on the root port */
-+ hprt0.d32 =
-+ dwc_otg_read_hprt0(core_if);
-+ hprt0.b.prtsusp = 0;
-+ hprt0.b.prtres = 1;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+ dwc_mdelay(100);
-+
-+ /* Clear the resume bit */
-+ hprt0.b.prtres = 0;
-+ DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
-+
-+ /* Restore interrupts */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 =
-+ DWC_READ_REG32
-+ (&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, 0);
-+
-+ /* 15 second delay per the test spec */
-+ dwc_mdelay(15000);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ dwc_mdelay(15000);
-+
-+ /* Restore interrupts */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
-+ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
-+ /* Save current interrupt mask */
-+ gintmsk.d32 =
-+ DWC_READ_REG32
-+ (&global_regs->gintmsk);
-+
-+ /* Disable all interrupts while we muck with
-+ * the hardware directly
-+ */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, 0);
-+
-+ /* Send the Setup packet */
-+ do_setup();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ dwc_mdelay(15000);
-+
-+ /* Send the In and Ack packets */
-+ do_in_ack();
-+
-+ /* 15 second delay so nothing else happens for awhile */
-+ dwc_mdelay(15000);
-+
-+ /* Restore interrupts */
-+ DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
-+ }
-+ }
-+ break;
-+ }
-+#endif /* DWC_HS_ELECT_TST */
-+
-+ case UHF_PORT_INDICATOR:
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
-+ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
-+ /* Not supported */
-+ break;
-+ default:
-+ retval = -DWC_E_INVALID;
-+ DWC_ERROR("DWC OTG HCD - "
-+ "SetPortFeature request %xh "
-+ "unknown or unsupported\n", wValue);
-+ break;
-+ }
-+ break;
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ case UCR_SET_AND_TEST_PORT_FEATURE:
-+ if (wValue != UHF_PORT_L1) {
-+ goto error;
-+ }
-+ {
-+ int portnum, hird, devaddr, remwake;
-+ glpmcfg_data_t lpmcfg;
-+ uint32_t time_usecs;
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk;
-+
-+ if (!dwc_otg_get_param_lpm_enable(core_if)) {
-+ goto error;
-+ }
-+ if (wValue != UHF_PORT_L1 || wLength != 1) {
-+ goto error;
-+ }
-+ /* Check if the port currently is in SLEEP state */
-+ lpmcfg.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ if (lpmcfg.b.prt_sleep_sts) {
-+ DWC_INFO("Port is already in sleep mode\n");
-+ buf[0] = 0; /* Return success */
-+ break;
-+ }
-+
-+ portnum = wIndex & 0xf;
-+ hird = (wIndex >> 4) & 0xf;
-+ devaddr = (wIndex >> 8) & 0x7f;
-+ remwake = (wIndex >> 15);
-+
-+ if (portnum != 1) {
-+ retval = -DWC_E_INVALID;
-+ DWC_WARN
-+ ("Wrong port number(%d) in SetandTestPortFeature request\n",
-+ portnum);
-+ break;
-+ }
-+
-+ DWC_PRINTF
-+ ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n",
-+ portnum, hird, devaddr, remwake);
-+ /* Disable LPM interrupt */
-+ gintmsk.d32 = 0;
-+ gintmsk.b.lpmtranrcvd = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
-+ gintmsk.d32, 0);
-+
-+ if (dwc_otg_hcd_send_lpm
-+ (dwc_otg_hcd, devaddr, hird, remwake)) {
-+ retval = -DWC_E_INVALID;
-+ break;
-+ }
-+
-+ time_usecs = 10 * (lpmcfg.b.retry_count + 1);
-+ /* We will consider timeout if time_usecs microseconds pass,
-+ * and we don't receive LPM transaction status.
-+ * After receiving non-error responce(ACK/NYET/STALL) from device,
-+ * core will set lpmtranrcvd bit.
-+ */
-+ do {
-+ gintsts.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ if (gintsts.b.lpmtranrcvd) {
-+ break;
-+ }
-+ dwc_udelay(1);
-+ } while (--time_usecs);
-+ /* lpm_int bit will be cleared in LPM interrupt handler */
-+
-+ /* Now fill status
-+ * 0x00 - Success
-+ * 0x10 - NYET
-+ * 0x11 - Timeout
-+ */
-+ if (!gintsts.b.lpmtranrcvd) {
-+ buf[0] = 0x3; /* Completion code is Timeout */
-+ dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd);
-+ } else {
-+ lpmcfg.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ if (lpmcfg.b.lpm_resp == 0x3) {
-+ /* ACK responce from the device */
-+ buf[0] = 0x00; /* Success */
-+ } else if (lpmcfg.b.lpm_resp == 0x2) {
-+ /* NYET responce from the device */
-+ buf[0] = 0x2;
-+ } else {
-+ /* Otherwise responce with Timeout */
-+ buf[0] = 0x3;
-+ }
-+ }
-+ DWC_PRINTF("Device responce to LPM trans is %x\n",
-+ lpmcfg.b.lpm_resp);
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0,
-+ gintmsk.d32);
-+
-+ break;
-+ }
-+#endif /* CONFIG_USB_DWC_OTG_LPM */
-+ default:
-+error:
-+ retval = -DWC_E_INVALID;
-+ DWC_WARN("DWC OTG HCD - "
-+ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
-+ typeReq, wIndex, wValue);
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+/** Returns index of host channel to perform LPM transaction. */
-+int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr)
-+{
-+ dwc_otg_core_if_t *core_if = hcd->core_if;
-+ dwc_hc_t *hc;
-+ hcchar_data_t hcchar;
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+
-+ if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
-+ DWC_PRINTF("No free channel to select for LPM transaction\n");
-+ return -1;
-+ }
-+
-+ hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
-+
-+ /* Mask host channel interrupts. */
-+ gintmsk.b.hcintr = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
-+
-+ /* Fill fields that core needs for LPM transaction */
-+ hcchar.b.devaddr = devaddr;
-+ hcchar.b.epnum = 0;
-+ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
-+ hcchar.b.mps = 64;
-+ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
-+ hcchar.b.epdir = 0; /* OUT */
-+ DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar,
-+ hcchar.d32);
-+
-+ /* Remove the host channel from the free list. */
-+ DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
-+
-+ DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr);
-+
-+ return hc->hc_num;
-+}
-+
-+/** Release hc after performing LPM transaction */
-+void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd)
-+{
-+ dwc_hc_t *hc;
-+ glpmcfg_data_t lpmcfg;
-+ uint8_t hc_num;
-+
-+ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
-+ hc_num = lpmcfg.b.lpm_chan_index;
-+
-+ hc = hcd->hc_ptr_array[hc_num];
-+
-+ DWC_PRINTF("Freeing channel %d after LPM\n", hc_num);
-+ /* Return host channel to free list */
-+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
-+}
-+
-+int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird,
-+ uint8_t bRemoteWake)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ pcgcctl_data_t pcgcctl = {.d32 = 0 };
-+ int channel;
-+
-+ channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr);
-+ if (channel < 0) {
-+ return channel;
-+ }
-+
-+ pcgcctl.b.enbl_sleep_gating = 1;
-+ DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32);
-+
-+ /* Read LPM config register */
-+ lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
-+
-+ /* Program LPM transaction fields */
-+ lpmcfg.b.rem_wkup_en = bRemoteWake;
-+ lpmcfg.b.hird = hird;
-+ lpmcfg.b.hird_thres = 0x1c;
-+ lpmcfg.b.lpm_chan_index = channel;
-+ lpmcfg.b.en_utmi_sleep = 1;
-+ /* Program LPM config register */
-+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
-+
-+ /* Send LPM transaction */
-+ lpmcfg.b.send_lpm = 1;
-+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
-+
-+ return 0;
-+}
-+
-+#endif /* CONFIG_USB_DWC_OTG_LPM */
-+
-+int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port)
-+{
-+ int retval;
-+
-+ if (port != 1) {
-+ return -DWC_E_INVALID;
-+ }
-+
-+ retval = (hcd->flags.b.port_connect_status_change ||
-+ hcd->flags.b.port_reset_change ||
-+ hcd->flags.b.port_enable_change ||
-+ hcd->flags.b.port_suspend_change ||
-+ hcd->flags.b.port_over_current_change);
-+#ifdef DEBUG
-+ if (retval) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
-+ " Root port status changed\n");
-+ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n",
-+ hcd->flags.b.port_connect_status_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n",
-+ hcd->flags.b.port_reset_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n",
-+ hcd->flags.b.port_enable_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n",
-+ hcd->flags.b.port_suspend_change);
-+ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n",
-+ hcd->flags.b.port_over_current_change);
-+ }
-+#endif
-+ return retval;
-+}
-+
-+int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ hfnum_data_t hfnum;
-+ hfnum.d32 =
-+ DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->
-+ hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n",
-+ hfnum.b.frnum);
-+#endif
-+ return hfnum.b.frnum;
-+}
-+
-+int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
-+ struct dwc_otg_hcd_function_ops *fops)
-+{
-+ int retval = 0;
-+
-+ hcd->fops = fops;
-+ if (!dwc_otg_is_device_mode(hcd->core_if) &&
-+ (!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) {
-+ dwc_otg_hcd_reinit(hcd);
-+ } else {
-+ retval = -DWC_E_NO_DEVICE;
-+ }
-+
-+ return retval;
-+}
-+
-+void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd)
-+{
-+ return hcd->priv;
-+}
-+
-+void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data)
-+{
-+ hcd->priv = priv_data;
-+}
-+
-+uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd)
-+{
-+ return hcd->otg_port;
-+}
-+
-+uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd)
-+{
-+ uint32_t is_b_host;
-+ if (hcd->core_if->op_state == B_HOST) {
-+ is_b_host = 1;
-+ } else {
-+ is_b_host = 0;
-+ }
-+
-+ return is_b_host;
-+}
-+
-+dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
-+ int iso_desc_count, int atomic_alloc)
-+{
-+ dwc_otg_hcd_urb_t *dwc_otg_urb;
-+ uint32_t size;
-+
-+ size =
-+ sizeof(*dwc_otg_urb) +
-+ iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc);
-+ if (atomic_alloc)
-+ dwc_otg_urb = DWC_ALLOC_ATOMIC(size);
-+ else
-+ dwc_otg_urb = DWC_ALLOC(size);
-+
-+ if (dwc_otg_urb)
-+ dwc_otg_urb->packet_count = iso_desc_count;
-+ else {
-+ DWC_ERROR("**** DWC OTG HCD URB alloc - "
-+ "%salloc of %db failed\n",
-+ atomic_alloc?"atomic ":"", size);
-+ }
-+ return dwc_otg_urb;
-+}
-+
-+void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ uint8_t dev_addr, uint8_t ep_num,
-+ uint8_t ep_type, uint8_t ep_dir, uint16_t mps)
-+{
-+ dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num,
-+ ep_type, ep_dir, mps);
-+#if 0
-+ DWC_PRINTF
-+ ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n",
-+ dev_addr, ep_num, ep_dir, ep_type, mps);
-+#endif
-+}
-+
-+void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ void *urb_handle, void *buf, dwc_dma_t dma,
-+ uint32_t buflen, void *setup_packet,
-+ dwc_dma_t setup_dma, uint32_t flags,
-+ uint16_t interval)
-+{
-+ dwc_otg_urb->priv = urb_handle;
-+ dwc_otg_urb->buf = buf;
-+ dwc_otg_urb->dma = dma;
-+ dwc_otg_urb->length = buflen;
-+ dwc_otg_urb->setup_packet = setup_packet;
-+ dwc_otg_urb->setup_dma = setup_dma;
-+ dwc_otg_urb->flags = flags;
-+ dwc_otg_urb->interval = interval;
-+ dwc_otg_urb->status = -DWC_E_IN_PROGRESS;
-+}
-+
-+uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb)
-+{
-+ return dwc_otg_urb->status;
-+}
-+
-+uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb)
-+{
-+ return dwc_otg_urb->actual_length;
-+}
-+
-+uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb)
-+{
-+ return dwc_otg_urb->error_count;
-+}
-+
-+void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ int desc_num, uint32_t offset,
-+ uint32_t length)
-+{
-+ dwc_otg_urb->iso_descs[desc_num].offset = offset;
-+ dwc_otg_urb->iso_descs[desc_num].length = length;
-+}
-+
-+uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ int desc_num)
-+{
-+ return dwc_otg_urb->iso_descs[desc_num].status;
-+}
-+
-+uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
-+ dwc_otg_urb, int desc_num)
-+{
-+ return dwc_otg_urb->iso_descs[desc_num].actual_length;
-+}
-+
-+int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle)
-+{
-+ int allocated = 0;
-+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
-+
-+ if (qh) {
-+ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
-+ allocated = 1;
-+ }
-+ }
-+ return allocated;
-+}
-+
-+int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle)
-+{
-+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
-+ int freed = 0;
-+ DWC_ASSERT(qh, "qh is not allocated\n");
-+
-+ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
-+ freed = 1;
-+ }
-+
-+ return freed;
-+}
-+
-+uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle)
-+{
-+ dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
-+ DWC_ASSERT(qh, "qh is not allocated\n");
-+ return qh->usecs;
-+}
-+
-+void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd)
-+{
-+#ifdef DEBUG
-+ int num_channels;
-+ int i;
-+ gnptxsts_data_t np_tx_status;
-+ hptxsts_data_t p_tx_status;
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ DWC_PRINTF("\n");
-+ DWC_PRINTF
-+ ("************************************************************\n");
-+ DWC_PRINTF("HCD State:\n");
-+ DWC_PRINTF(" Num channels: %d\n", num_channels);
-+ for (i = 0; i < num_channels; i++) {
-+ dwc_hc_t *hc = hcd->hc_ptr_array[i];
-+ DWC_PRINTF(" Channel %d:\n", i);
-+ DWC_PRINTF(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
-+ hc->dev_addr, hc->ep_num, hc->ep_is_in);
-+ DWC_PRINTF(" speed: %d\n", hc->speed);
-+ DWC_PRINTF(" ep_type: %d\n", hc->ep_type);
-+ DWC_PRINTF(" max_packet: %d\n", hc->max_packet);
-+ DWC_PRINTF(" data_pid_start: %d\n", hc->data_pid_start);
-+ DWC_PRINTF(" multi_count: %d\n", hc->multi_count);
-+ DWC_PRINTF(" xfer_started: %d\n", hc->xfer_started);
-+ DWC_PRINTF(" xfer_buff: %p\n", hc->xfer_buff);
-+ DWC_PRINTF(" xfer_len: %d\n", hc->xfer_len);
-+ DWC_PRINTF(" xfer_count: %d\n", hc->xfer_count);
-+ DWC_PRINTF(" halt_on_queue: %d\n", hc->halt_on_queue);
-+ DWC_PRINTF(" halt_pending: %d\n", hc->halt_pending);
-+ DWC_PRINTF(" halt_status: %d\n", hc->halt_status);
-+ DWC_PRINTF(" do_split: %d\n", hc->do_split);
-+ DWC_PRINTF(" complete_split: %d\n", hc->complete_split);
-+ DWC_PRINTF(" hub_addr: %d\n", hc->hub_addr);
-+ DWC_PRINTF(" port_addr: %d\n", hc->port_addr);
-+ DWC_PRINTF(" xact_pos: %d\n", hc->xact_pos);
-+ DWC_PRINTF(" requests: %d\n", hc->requests);
-+ DWC_PRINTF(" qh: %p\n", hc->qh);
-+ if (hc->xfer_started) {
-+ hfnum_data_t hfnum;
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hfnum.d32 =
-+ DWC_READ_REG32(&hcd->core_if->
-+ host_if->host_global_regs->hfnum);
-+ hcchar.d32 =
-+ DWC_READ_REG32(&hcd->core_if->host_if->
-+ hc_regs[i]->hcchar);
-+ hctsiz.d32 =
-+ DWC_READ_REG32(&hcd->core_if->host_if->
-+ hc_regs[i]->hctsiz);
-+ hcint.d32 =
-+ DWC_READ_REG32(&hcd->core_if->host_if->
-+ hc_regs[i]->hcint);
-+ hcintmsk.d32 =
-+ DWC_READ_REG32(&hcd->core_if->host_if->
-+ hc_regs[i]->hcintmsk);
-+ DWC_PRINTF(" hfnum: 0x%08x\n", hfnum.d32);
-+ DWC_PRINTF(" hcchar: 0x%08x\n", hcchar.d32);
-+ DWC_PRINTF(" hctsiz: 0x%08x\n", hctsiz.d32);
-+ DWC_PRINTF(" hcint: 0x%08x\n", hcint.d32);
-+ DWC_PRINTF(" hcintmsk: 0x%08x\n", hcintmsk.d32);
-+ }
-+ if (hc->xfer_started && hc->qh) {
-+ dwc_otg_qtd_t *qtd;
-+ dwc_otg_hcd_urb_t *urb;
-+
-+ DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) {
-+ if (!qtd->in_process)
-+ break;
-+
-+ urb = qtd->urb;
-+ DWC_PRINTF(" URB Info:\n");
-+ DWC_PRINTF(" qtd: %p, urb: %p\n", qtd, urb);
-+ if (urb) {
-+ DWC_PRINTF(" Dev: %d, EP: %d %s\n",
-+ dwc_otg_hcd_get_dev_addr(&urb->
-+ pipe_info),
-+ dwc_otg_hcd_get_ep_num(&urb->
-+ pipe_info),
-+ dwc_otg_hcd_is_pipe_in(&urb->
-+ pipe_info) ?
-+ "IN" : "OUT");
-+ DWC_PRINTF(" Max packet size: %d\n",
-+ dwc_otg_hcd_get_mps(&urb->
-+ pipe_info));
-+ DWC_PRINTF(" transfer_buffer: %p\n",
-+ urb->buf);
-+ DWC_PRINTF(" transfer_dma: %p\n",
-+ (void *)urb->dma);
-+ DWC_PRINTF(" transfer_buffer_length: %d\n",
-+ urb->length);
-+ DWC_PRINTF(" actual_length: %d\n",
-+ urb->actual_length);
-+ }
-+ }
-+ }
-+ }
-+ DWC_PRINTF(" non_periodic_channels: %d\n", hcd->non_periodic_channels);
-+ DWC_PRINTF(" periodic_channels: %d\n", hcd->periodic_channels);
-+ DWC_PRINTF(" periodic_usecs: %d\n", hcd->periodic_usecs);
-+ np_tx_status.d32 =
-+ DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts);
-+ DWC_PRINTF(" NP Tx Req Queue Space Avail: %d\n",
-+ np_tx_status.b.nptxqspcavail);
-+ DWC_PRINTF(" NP Tx FIFO Space Avail: %d\n",
-+ np_tx_status.b.nptxfspcavail);
-+ p_tx_status.d32 =
-+ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts);
-+ DWC_PRINTF(" P Tx Req Queue Space Avail: %d\n",
-+ p_tx_status.b.ptxqspcavail);
-+ DWC_PRINTF(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
-+ dwc_otg_hcd_dump_frrem(hcd);
-+ dwc_otg_dump_global_registers(hcd->core_if);
-+ dwc_otg_dump_host_registers(hcd->core_if);
-+ DWC_PRINTF
-+ ("************************************************************\n");
-+ DWC_PRINTF("\n");
-+#endif
-+}
-+
-+#ifdef DEBUG
-+void dwc_print_setup_data(uint8_t * setup)
-+{
-+ int i;
-+ if (CHK_DEBUG_LEVEL(DBG_HCD)) {
-+ DWC_PRINTF("Setup Data = MSB ");
-+ for (i = 7; i >= 0; i--)
-+ DWC_PRINTF("%02x ", setup[i]);
-+ DWC_PRINTF("\n");
-+ DWC_PRINTF(" bmRequestType Tranfer = %s\n",
-+ (setup[0] & 0x80) ? "Device-to-Host" :
-+ "Host-to-Device");
-+ DWC_PRINTF(" bmRequestType Type = ");
-+ switch ((setup[0] & 0x60) >> 5) {
-+ case 0:
-+ DWC_PRINTF("Standard\n");
-+ break;
-+ case 1:
-+ DWC_PRINTF("Class\n");
-+ break;
-+ case 2:
-+ DWC_PRINTF("Vendor\n");
-+ break;
-+ case 3:
-+ DWC_PRINTF("Reserved\n");
-+ break;
-+ }
-+ DWC_PRINTF(" bmRequestType Recipient = ");
-+ switch (setup[0] & 0x1f) {
-+ case 0:
-+ DWC_PRINTF("Device\n");
-+ break;
-+ case 1:
-+ DWC_PRINTF("Interface\n");
-+ break;
-+ case 2:
-+ DWC_PRINTF("Endpoint\n");
-+ break;
-+ case 3:
-+ DWC_PRINTF("Other\n");
-+ break;
-+ default:
-+ DWC_PRINTF("Reserved\n");
-+ break;
-+ }
-+ DWC_PRINTF(" bRequest = 0x%0x\n", setup[1]);
-+ DWC_PRINTF(" wValue = 0x%0x\n", *((uint16_t *) & setup[2]));
-+ DWC_PRINTF(" wIndex = 0x%0x\n", *((uint16_t *) & setup[4]));
-+ DWC_PRINTF(" wLength = 0x%0x\n\n", *((uint16_t *) & setup[6]));
-+ }
-+}
-+#endif
-+
-+void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd)
-+{
-+#if 0
-+ DWC_PRINTF("Frame remaining at SOF:\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->frrem_samples, hcd->frrem_accum,
-+ (hcd->frrem_samples > 0) ?
-+ hcd->frrem_accum / hcd->frrem_samples : 0);
-+
-+ DWC_PRINTF("\n");
-+ DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_7_samples,
-+ hcd->core_if->hfnum_7_frrem_accum,
-+ (hcd->core_if->hfnum_7_samples >
-+ 0) ? hcd->core_if->hfnum_7_frrem_accum /
-+ hcd->core_if->hfnum_7_samples : 0);
-+ DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_0_samples,
-+ hcd->core_if->hfnum_0_frrem_accum,
-+ (hcd->core_if->hfnum_0_samples >
-+ 0) ? hcd->core_if->hfnum_0_frrem_accum /
-+ hcd->core_if->hfnum_0_samples : 0);
-+ DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->core_if->hfnum_other_samples,
-+ hcd->core_if->hfnum_other_frrem_accum,
-+ (hcd->core_if->hfnum_other_samples >
-+ 0) ? hcd->core_if->hfnum_other_frrem_accum /
-+ hcd->core_if->hfnum_other_samples : 0);
-+
-+ DWC_PRINTF("\n");
-+ DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
-+ (hcd->hfnum_7_samples_a > 0) ?
-+ hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0);
-+ DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
-+ (hcd->hfnum_0_samples_a > 0) ?
-+ hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0);
-+ DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
-+ (hcd->hfnum_other_samples_a > 0) ?
-+ hcd->hfnum_other_frrem_accum_a /
-+ hcd->hfnum_other_samples_a : 0);
-+
-+ DWC_PRINTF("\n");
-+ DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
-+ (hcd->hfnum_7_samples_b > 0) ?
-+ hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0);
-+ DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
-+ (hcd->hfnum_0_samples_b > 0) ?
-+ hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0);
-+ DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n");
-+ DWC_PRINTF(" samples %u, accum %llu, avg %llu\n",
-+ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
-+ (hcd->hfnum_other_samples_b > 0) ?
-+ hcd->hfnum_other_frrem_accum_b /
-+ hcd->hfnum_other_samples_b : 0);
-+#endif
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
-@@ -0,0 +1,868 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
-+ * $Revision: #58 $
-+ * $Date: 2011/09/15 $
-+ * $Change: 1846647 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+#ifndef __DWC_HCD_H__
-+#define __DWC_HCD_H__
-+
-+#include "dwc_otg_os_dep.h"
-+#include "usb.h"
-+#include "dwc_otg_hcd_if.h"
-+#include "dwc_otg_core_if.h"
-+#include "dwc_list.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_fiq_fsm.h"
-+#include "dwc_otg_driver.h"
-+
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Host Contoller Driver (HCD).
-+ *
-+ * The Host Controller Driver (HCD) is responsible for translating requests
-+ * from the USB Driver into the appropriate actions on the DWC_otg controller.
-+ * It isolates the USBD from the specifics of the controller by providing an
-+ * API to the USBD.
-+ */
-+
-+struct dwc_otg_hcd_pipe_info {
-+ uint8_t dev_addr;
-+ uint8_t ep_num;
-+ uint8_t pipe_type;
-+ uint8_t pipe_dir;
-+ uint16_t mps;
-+};
-+
-+struct dwc_otg_hcd_iso_packet_desc {
-+ uint32_t offset;
-+ uint32_t length;
-+ uint32_t actual_length;
-+ uint32_t status;
-+};
-+
-+struct dwc_otg_qtd;
-+
-+struct dwc_otg_hcd_urb {
-+ void *priv;
-+ struct dwc_otg_qtd *qtd;
-+ void *buf;
-+ dwc_dma_t dma;
-+ void *setup_packet;
-+ dwc_dma_t setup_dma;
-+ uint32_t length;
-+ uint32_t actual_length;
-+ uint32_t status;
-+ uint32_t error_count;
-+ uint32_t packet_count;
-+ uint32_t flags;
-+ uint16_t interval;
-+ struct dwc_otg_hcd_pipe_info pipe_info;
-+ struct dwc_otg_hcd_iso_packet_desc iso_descs[0];
-+};
-+
-+static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe)
-+{
-+ return pipe->ep_num;
-+}
-+
-+static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return pipe->pipe_type;
-+}
-+
-+static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe)
-+{
-+ return pipe->mps;
-+}
-+
-+static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return pipe->dev_addr;
-+}
-+
-+static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return (pipe->pipe_type == UE_ISOCHRONOUS);
-+}
-+
-+static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return (pipe->pipe_type == UE_INTERRUPT);
-+}
-+
-+static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return (pipe->pipe_type == UE_BULK);
-+}
-+
-+static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return (pipe->pipe_type == UE_CONTROL);
-+}
-+
-+static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe)
-+{
-+ return (pipe->pipe_dir == UE_DIR_IN);
-+}
-+
-+static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info
-+ *pipe)
-+{
-+ return (!dwc_otg_hcd_is_pipe_in(pipe));
-+}
-+
-+static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe,
-+ uint8_t devaddr, uint8_t ep_num,
-+ uint8_t pipe_type, uint8_t pipe_dir,
-+ uint16_t mps)
-+{
-+ pipe->dev_addr = devaddr;
-+ pipe->ep_num = ep_num;
-+ pipe->pipe_type = pipe_type;
-+ pipe->pipe_dir = pipe_dir;
-+ pipe->mps = mps;
-+}
-+
-+/**
-+ * Phases for control transfers.
-+ */
-+typedef enum dwc_otg_control_phase {
-+ DWC_OTG_CONTROL_SETUP,
-+ DWC_OTG_CONTROL_DATA,
-+ DWC_OTG_CONTROL_STATUS
-+} dwc_otg_control_phase_e;
-+
-+/** Transaction types. */
-+typedef enum dwc_otg_transaction_type {
-+ DWC_OTG_TRANSACTION_NONE = 0,
-+ DWC_OTG_TRANSACTION_PERIODIC = 1,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC = 2,
-+ DWC_OTG_TRANSACTION_ALL = DWC_OTG_TRANSACTION_PERIODIC + DWC_OTG_TRANSACTION_NON_PERIODIC
-+} dwc_otg_transaction_type_e;
-+
-+struct dwc_otg_qh;
-+
-+/**
-+ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
-+ * interrupt, or isochronous transfer. A single QTD is created for each URB
-+ * (of one of these types) submitted to the HCD. The transfer associated with
-+ * a QTD may require one or multiple transactions.
-+ *
-+ * A QTD is linked to a Queue Head, which is entered in either the
-+ * non-periodic or periodic schedule for execution. When a QTD is chosen for
-+ * execution, some or all of its transactions may be executed. After
-+ * execution, the state of the QTD is updated. The QTD may be retired if all
-+ * its transactions are complete or if an error occurred. Otherwise, it
-+ * remains in the schedule so more transactions can be executed later.
-+ */
-+typedef struct dwc_otg_qtd {
-+ /**
-+ * Determines the PID of the next data packet for the data phase of
-+ * control transfers. Ignored for other transfer types.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Current phase for control transfers (Setup, Data, or Status). */
-+ dwc_otg_control_phase_e control_phase;
-+
-+ /** Keep track of the current split type
-+ * for FS/LS endpoints on a HS Hub */
-+ uint8_t complete_split;
-+
-+ /** How many bytes transferred during SSPLIT OUT */
-+ uint32_t ssplit_out_xfer_count;
-+
-+ /**
-+ * Holds the number of bus errors that have occurred for a transaction
-+ * within this transfer.
-+ */
-+ uint8_t error_count;
-+
-+ /**
-+ * Index of the next frame descriptor for an isochronous transfer. A
-+ * frame descriptor describes the buffer position and length of the
-+ * data to be transferred in the next scheduled (micro)frame of an
-+ * isochronous transfer. It also holds status for that transaction.
-+ * The frame index starts at 0.
-+ */
-+ uint16_t isoc_frame_index;
-+
-+ /** Position of the ISOC split on full/low speed */
-+ uint8_t isoc_split_pos;
-+
-+ /** Position of the ISOC split in the buffer for the current frame */
-+ uint16_t isoc_split_offset;
-+
-+ /** URB for this transfer */
-+ struct dwc_otg_hcd_urb *urb;
-+
-+ struct dwc_otg_qh *qh;
-+
-+ /** This list of QTDs */
-+ DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry;
-+
-+ /** Indicates if this QTD is currently processed by HW. */
-+ uint8_t in_process;
-+
-+ /** Number of DMA descriptors for this QTD */
-+ uint8_t n_desc;
-+
-+ /**
-+ * Last activated frame(packet) index.
-+ * Used in Descriptor DMA mode only.
-+ */
-+ uint16_t isoc_frame_index_last;
-+
-+} dwc_otg_qtd_t;
-+
-+DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd);
-+
-+/**
-+ * A Queue Head (QH) holds the static characteristics of an endpoint and
-+ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
-+ * be entered in either the non-periodic or periodic schedule.
-+ */
-+typedef struct dwc_otg_qh {
-+ /**
-+ * Endpoint type.
-+ * One of the following values:
-+ * - UE_CONTROL
-+ * - UE_BULK
-+ * - UE_INTERRUPT
-+ * - UE_ISOCHRONOUS
-+ */
-+ uint8_t ep_type;
-+ uint8_t ep_is_in;
-+
-+ /** wMaxPacketSize Field of Endpoint Descriptor. */
-+ uint16_t maxp;
-+
-+ /**
-+ * Device speed.
-+ * One of the following values:
-+ * - DWC_OTG_EP_SPEED_LOW
-+ * - DWC_OTG_EP_SPEED_FULL
-+ * - DWC_OTG_EP_SPEED_HIGH
-+ */
-+ uint8_t dev_speed;
-+
-+ /**
-+ * Determines the PID of the next data packet for non-control
-+ * transfers. Ignored for control transfers.<br>
-+ * One of the following values:
-+ * - DWC_OTG_HC_PID_DATA0
-+ * - DWC_OTG_HC_PID_DATA1
-+ */
-+ uint8_t data_toggle;
-+
-+ /** Ping state if 1. */
-+ uint8_t ping_state;
-+
-+ /**
-+ * List of QTDs for this QH.
-+ */
-+ struct dwc_otg_qtd_list qtd_list;
-+
-+ /** Host channel currently processing transfers for this QH. */
-+ struct dwc_hc *channel;
-+
-+ /** Full/low speed endpoint on high-speed hub requires split. */
-+ uint8_t do_split;
-+
-+ /** @name Periodic schedule information */
-+ /** @{ */
-+
-+ /** Bandwidth in microseconds per (micro)frame. */
-+ uint16_t usecs;
-+
-+ /** Interval between transfers in (micro)frames. */
-+ uint16_t interval;
-+
-+ /**
-+ * (micro)frame to initialize a periodic transfer. The transfer
-+ * executes in the following (micro)frame.
-+ */
-+ uint16_t sched_frame;
-+
-+ /*
-+ ** Frame a NAK was received on this queue head, used to minimise NAK retransmission
-+ */
-+ uint16_t nak_frame;
-+
-+ /** (micro)frame at which last start split was initialized. */
-+ uint16_t start_split_frame;
-+
-+ /** @} */
-+
-+ /**
-+ * Used instead of original buffer if
-+ * it(physical address) is not dword-aligned.
-+ */
-+ uint8_t *dw_align_buf;
-+ dwc_dma_t dw_align_buf_dma;
-+
-+ /** Entry for QH in either the periodic or non-periodic schedule. */
-+ dwc_list_link_t qh_list_entry;
-+
-+ /** @name Descriptor DMA support */
-+ /** @{ */
-+
-+ /** Descriptor List. */
-+ dwc_otg_host_dma_desc_t *desc_list;
-+
-+ /** Descriptor List physical address. */
-+ dwc_dma_t desc_list_dma;
-+
-+ /**
-+ * Xfer Bytes array.
-+ * Each element corresponds to a descriptor and indicates
-+ * original XferSize size value for the descriptor.
-+ */
-+ uint32_t *n_bytes;
-+
-+ /** Actual number of transfer descriptors in a list. */
-+ uint16_t ntd;
-+
-+ /** First activated isochronous transfer descriptor index. */
-+ uint8_t td_first;
-+ /** Last activated isochronous transfer descriptor index. */
-+ uint8_t td_last;
-+
-+ /** @} */
-+
-+
-+ uint16_t speed;
-+ uint16_t frame_usecs[8];
-+
-+ uint32_t skip_count;
-+} dwc_otg_qh_t;
-+
-+DWC_CIRCLEQ_HEAD(hc_list, dwc_hc);
-+
-+typedef struct urb_tq_entry {
-+ struct urb *urb;
-+ DWC_TAILQ_ENTRY(urb_tq_entry) urb_tq_entries;
-+} urb_tq_entry_t;
-+
-+DWC_TAILQ_HEAD(urb_list, urb_tq_entry);
-+
-+/**
-+ * This structure holds the state of the HCD, including the non-periodic and
-+ * periodic schedules.
-+ */
-+struct dwc_otg_hcd {
-+ /** The DWC otg device pointer */
-+ struct dwc_otg_device *otg_dev;
-+ /** DWC OTG Core Interface Layer */
-+ dwc_otg_core_if_t *core_if;
-+
-+ /** Function HCD driver callbacks */
-+ struct dwc_otg_hcd_function_ops *fops;
-+
-+ /** Internal DWC HCD Flags */
-+ volatile union dwc_otg_hcd_internal_flags {
-+ uint32_t d32;
-+ struct {
-+ unsigned port_connect_status_change:1;
-+ unsigned port_connect_status:1;
-+ unsigned port_reset_change:1;
-+ unsigned port_enable_change:1;
-+ unsigned port_suspend_change:1;
-+ unsigned port_over_current_change:1;
-+ unsigned port_l1_change:1;
-+ unsigned reserved:26;
-+ } b;
-+ } flags;
-+
-+ /**
-+ * Inactive items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are not
-+ * currently assigned to a host channel.
-+ */
-+ dwc_list_link_t non_periodic_sched_inactive;
-+
-+ /**
-+ * Active items in the non-periodic schedule. This is a list of
-+ * Queue Heads. Transfers associated with these Queue Heads are
-+ * currently assigned to a host channel.
-+ */
-+ dwc_list_link_t non_periodic_sched_active;
-+
-+ /**
-+ * Pointer to the next Queue Head to process in the active
-+ * non-periodic schedule.
-+ */
-+ dwc_list_link_t *non_periodic_qh_ptr;
-+
-+ /**
-+ * Inactive items in the periodic schedule. This is a list of QHs for
-+ * periodic transfers that are _not_ scheduled for the next frame.
-+ * Each QH in the list has an interval counter that determines when it
-+ * needs to be scheduled for execution. This scheduling mechanism
-+ * allows only a simple calculation for periodic bandwidth used (i.e.
-+ * must assume that all periodic transfers may need to execute in the
-+ * same frame). However, it greatly simplifies scheduling and should
-+ * be sufficient for the vast majority of OTG hosts, which need to
-+ * connect to a small number of peripherals at one time.
-+ *
-+ * Items move from this list to periodic_sched_ready when the QH
-+ * interval counter is 0 at SOF.
-+ */
-+ dwc_list_link_t periodic_sched_inactive;
-+
-+ /**
-+ * List of periodic QHs that are ready for execution in the next
-+ * frame, but have not yet been assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_assigned as host
-+ * channels become available during the current frame.
-+ */
-+ dwc_list_link_t periodic_sched_ready;
-+
-+ /**
-+ * List of periodic QHs to be executed in the next frame that are
-+ * assigned to host channels.
-+ *
-+ * Items move from this list to periodic_sched_queued as the
-+ * transactions for the QH are queued to the DWC_otg controller.
-+ */
-+ dwc_list_link_t periodic_sched_assigned;
-+
-+ /**
-+ * List of periodic QHs that have been queued for execution.
-+ *
-+ * Items move from this list to either periodic_sched_inactive or
-+ * periodic_sched_ready when the channel associated with the transfer
-+ * is released. If the interval for the QH is 1, the item moves to
-+ * periodic_sched_ready because it must be rescheduled for the next
-+ * frame. Otherwise, the item moves to periodic_sched_inactive.
-+ */
-+ dwc_list_link_t periodic_sched_queued;
-+
-+ /**
-+ * Total bandwidth claimed so far for periodic transfers. This value
-+ * is in microseconds per (micro)frame. The assumption is that all
-+ * periodic transfers may occur in the same (micro)frame.
-+ */
-+ uint16_t periodic_usecs;
-+
-+ /**
-+ * Total bandwidth claimed so far for all periodic transfers
-+ * in a frame.
-+ * This will include a mixture of HS and FS transfers.
-+ * Units are microseconds per (micro)frame.
-+ * We have a budget per frame and have to schedule
-+ * transactions accordingly.
-+ * Watch out for the fact that things are actually scheduled for the
-+ * "next frame".
-+ */
-+ uint16_t frame_usecs[8];
-+
-+
-+ /**
-+ * Frame number read from the core at SOF. The value ranges from 0 to
-+ * DWC_HFNUM_MAX_FRNUM.
-+ */
-+ uint16_t frame_number;
-+
-+ /**
-+ * Count of periodic QHs, if using several eps. For SOF enable/disable.
-+ */
-+ uint16_t periodic_qh_count;
-+
-+ /**
-+ * Free host channels in the controller. This is a list of
-+ * dwc_hc_t items.
-+ */
-+ struct hc_list free_hc_list;
-+ /**
-+ * Number of host channels assigned to periodic transfers. Currently
-+ * assuming that there is a dedicated host channel for each periodic
-+ * transaction and at least one host channel available for
-+ * non-periodic transactions.
-+ */
-+ int periodic_channels; /* microframe_schedule==0 */
-+
-+ /**
-+ * Number of host channels assigned to non-periodic transfers.
-+ */
-+ int non_periodic_channels; /* microframe_schedule==0 */
-+
-+ /**
-+ * Number of host channels assigned to non-periodic transfers.
-+ */
-+ int available_host_channels;
-+
-+ /**
-+ * Array of pointers to the host channel descriptors. Allows accessing
-+ * a host channel descriptor given the host channel number. This is
-+ * useful in interrupt handlers.
-+ */
-+ struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS];
-+
-+ /**
-+ * Buffer to use for any data received during the status phase of a
-+ * control transfer. Normally no data is transferred during the status
-+ * phase. This buffer is used as a bit bucket.
-+ */
-+ uint8_t *status_buf;
-+
-+ /**
-+ * DMA address for status_buf.
-+ */
-+ dma_addr_t status_buf_dma;
-+#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
-+
-+ /**
-+ * Connection timer. An OTG host must display a message if the device
-+ * does not connect. Started when the VBus power is turned on via
-+ * sysfs attribute "buspower".
-+ */
-+ dwc_timer_t *conn_timer;
-+
-+ /* Tasket to do a reset */
-+ dwc_tasklet_t *reset_tasklet;
-+
-+ dwc_tasklet_t *completion_tasklet;
-+ struct urb_list completed_urb_list;
-+
-+ /* */
-+ dwc_spinlock_t *lock;
-+ dwc_spinlock_t *channel_lock;
-+ /**
-+ * Private data that could be used by OS wrapper.
-+ */
-+ void *priv;
-+
-+ uint8_t otg_port;
-+
-+ /** Frame List */
-+ uint32_t *frame_list;
-+
-+ /** Hub - Port assignment */
-+ int hub_port[128];
-+#ifdef FIQ_DEBUG
-+ int hub_port_alloc[2048];
-+#endif
-+
-+ /** Frame List DMA address */
-+ dma_addr_t frame_list_dma;
-+
-+ struct fiq_stack *fiq_stack;
-+ struct fiq_state *fiq_state;
-+
-+ /** Virtual address for split transaction DMA bounce buffers */
-+ struct fiq_dma_blob *fiq_dmab;
-+
-+#ifdef DEBUG
-+ uint32_t frrem_samples;
-+ uint64_t frrem_accum;
-+
-+ uint32_t hfnum_7_samples_a;
-+ uint64_t hfnum_7_frrem_accum_a;
-+ uint32_t hfnum_0_samples_a;
-+ uint64_t hfnum_0_frrem_accum_a;
-+ uint32_t hfnum_other_samples_a;
-+ uint64_t hfnum_other_frrem_accum_a;
-+
-+ uint32_t hfnum_7_samples_b;
-+ uint64_t hfnum_7_frrem_accum_b;
-+ uint32_t hfnum_0_samples_b;
-+ uint64_t hfnum_0_frrem_accum_b;
-+ uint32_t hfnum_other_samples_b;
-+ uint64_t hfnum_other_frrem_accum_b;
-+#endif
-+};
-+
-+static inline struct device *dwc_otg_hcd_to_dev(struct dwc_otg_hcd *hcd)
-+{
-+ return &hcd->otg_dev->os_dep.platformdev->dev;
-+}
-+
-+/** @name Transaction Execution Functions */
-+/** @{ */
-+extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t
-+ * hcd);
-+extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
-+ dwc_otg_transaction_type_e tr_type);
-+
-+int dwc_otg_hcd_allocate_port(dwc_otg_hcd_t * hcd, dwc_otg_qh_t *qh);
-+void dwc_otg_hcd_release_port(dwc_otg_hcd_t * dwc_otg_hcd, dwc_otg_qh_t *qh);
-+
-+extern int fiq_fsm_queue_transaction(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh);
-+extern int fiq_fsm_transaction_suitable(dwc_otg_qh_t *qh);
-+extern void dwc_otg_cleanup_fiq_channel(dwc_otg_hcd_t *hcd, uint32_t num);
-+
-+/** @} */
-+
-+/** @name Interrupt Handler Functions */
-+/** @{ */
-+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *
-+ dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *
-+ dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *
-+ dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *
-+ dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *
-+ dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd,
-+ uint32_t num);
-+extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *
-+ dwc_otg_hcd);
-+/** @} */
-+
-+/** @name Schedule Queue Functions */
-+/** @{ */
-+
-+/* Implemented in dwc_otg_hcd_queue.c */
-+extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
-+ dwc_otg_hcd_urb_t * urb, int atomic_alloc);
-+extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
-+extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
-+extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
-+extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
-+ int sched_csplit);
-+
-+/** Remove and free a QH */
-+static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd,
-+ dwc_otg_qh_t * qh)
-+{
-+ dwc_irqflags_t flags;
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+ dwc_otg_hcd_qh_free(hcd, qh);
-+}
-+
-+/** Allocates memory for a QH structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc)
-+{
-+ if (atomic_alloc)
-+ return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t));
-+ else
-+ return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t));
-+}
-+
-+extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb,
-+ int atomic_alloc);
-+extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb);
-+extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd,
-+ dwc_otg_qh_t ** qh, int atomic_alloc);
-+
-+/** Allocates memory for a QTD structure.
-+ * @return Returns the memory allocate or NULL on error. */
-+static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc)
-+{
-+ if (atomic_alloc)
-+ return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t));
-+ else
-+ return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t));
-+}
-+
-+/** Frees the memory for a QTD structure. QTD should already be removed from
-+ * list.
-+ * @param qtd QTD to free.*/
-+static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd)
-+{
-+ DWC_FREE(qtd);
-+}
-+
-+/** Removes a QTD from list.
-+ * @param hcd HCD instance.
-+ * @param qtd QTD to remove from list.
-+ * @param qh QTD belongs to.
-+ */
-+static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_qh_t * qh)
-+{
-+ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
-+}
-+
-+/** Remove and free a QTD
-+ * Need to disable IRQ and hold hcd lock while calling this function out of
-+ * interrupt servicing chain */
-+static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_qh_t * qh)
-+{
-+ dwc_otg_hcd_qtd_remove(hcd, qtd, qh);
-+ dwc_otg_hcd_qtd_free(qtd);
-+}
-+
-+/** @} */
-+
-+/** @name Descriptor DMA Supporting Functions */
-+/** @{ */
-+
-+extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
-+extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_halt_status_e halt_status);
-+
-+extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
-+extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
-+
-+/** @} */
-+
-+/** @name Internal Functions */
-+/** @{ */
-+dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb);
-+/** @} */
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd,
-+ uint8_t devaddr);
-+extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd);
-+#endif
-+
-+/** Gets the QH that contains the list_head */
-+#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
-+
-+/** Gets the QTD that contains the list_head */
-+#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
-+
-+/** Check if QH is non-periodic */
-+#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \
-+ (_qh_ptr_->ep_type == UE_CONTROL))
-+
-+/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-+#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-+
-+/** Packet size for any kind of endpoint descriptor */
-+#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-+
-+/**
-+ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
-+ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
-+ * frame number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
-+{
-+ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
-+ (DWC_HFNUM_MAX_FRNUM >> 1);
-+}
-+
-+/**
-+ * Returns true if _frame1 is greater than _frame2. The comparison is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
-+ * number when the max frame number is reached.
-+ */
-+static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
-+{
-+ return (frame1 != frame2) &&
-+ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
-+ (DWC_HFNUM_MAX_FRNUM >> 1));
-+}
-+
-+/**
-+ * Increments _frame by the amount specified by _inc. The addition is done
-+ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
-+ */
-+static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
-+{
-+ return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
-+}
-+
-+static inline uint16_t dwc_full_frame_num(uint16_t frame)
-+{
-+ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
-+}
-+
-+static inline uint16_t dwc_micro_frame_num(uint16_t frame)
-+{
-+ return frame & 0x7;
-+}
-+
-+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd);
-+
-+#ifdef DEBUG
-+/**
-+ * Macro to sample the remaining PHY clocks left in the current frame. This
-+ * may be used during debugging to determine the average time it takes to
-+ * execute sections of code. There are two possible sample points, "a" and
-+ * "b", so the _letter argument must be one of these values.
-+ *
-+ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
-+ * example, "cat /sys/devices/lm0/hcd_frrem".
-+ */
-+#define dwc_sample_frrem(_hcd, _qh, _letter) \
-+{ \
-+ hfnum_data_t hfnum; \
-+ dwc_otg_qtd_t *qtd; \
-+ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
-+ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
-+ hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
-+ switch (hfnum.b.frnum & 0x7) { \
-+ case 7: \
-+ _hcd->hfnum_7_samples_##_letter++; \
-+ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ case 0: \
-+ _hcd->hfnum_0_samples_##_letter++; \
-+ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ default: \
-+ _hcd->hfnum_other_samples_##_letter++; \
-+ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
-+ break; \
-+ } \
-+ } \
-+}
-+#else
-+#define dwc_sample_frrem(_hcd, _qh, _letter)
-+#endif
-+#endif
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
-@@ -0,0 +1,1139 @@
-+/*==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $
-+ * $Revision: #10 $
-+ * $Date: 2011/10/20 $
-+ * $Change: 1869464 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/** @file
-+ * This file contains Descriptor DMA support implementation for host mode.
-+ */
-+
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+extern bool microframe_schedule;
-+
-+static inline uint8_t frame_list_idx(uint16_t frame)
-+{
-+ return (frame & (MAX_FRLIST_EN_NUM - 1));
-+}
-+
-+static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed)
-+{
-+ return (idx + inc) &
-+ (((speed ==
-+ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
-+ MAX_DMA_DESC_NUM_GENERIC) - 1);
-+}
-+
-+static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed)
-+{
-+ return (idx - inc) &
-+ (((speed ==
-+ DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
-+ MAX_DMA_DESC_NUM_GENERIC) - 1);
-+}
-+
-+static inline uint16_t max_desc_num(dwc_otg_qh_t * qh)
-+{
-+ return (((qh->ep_type == UE_ISOCHRONOUS)
-+ && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH))
-+ ? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC);
-+}
-+static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh)
-+{
-+ return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)
-+ ? ((qh->interval + 8 - 1) / 8)
-+ : qh->interval);
-+}
-+
-+static int desc_list_alloc(struct device *dev, dwc_otg_qh_t * qh)
-+{
-+ int retval = 0;
-+
-+ qh->desc_list = (dwc_otg_host_dma_desc_t *)
-+ DWC_DMA_ALLOC(dev, sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh),
-+ &qh->desc_list_dma);
-+
-+ if (!qh->desc_list) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__);
-+
-+ }
-+
-+ dwc_memset(qh->desc_list, 0x00,
-+ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
-+
-+ qh->n_bytes =
-+ (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh));
-+
-+ if (!qh->n_bytes) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR
-+ ("%s: Failed to allocate array for descriptors' size actual values\n",
-+ __func__);
-+
-+ }
-+ return retval;
-+
-+}
-+
-+static void desc_list_free(struct device *dev, dwc_otg_qh_t * qh)
-+{
-+ if (qh->desc_list) {
-+ DWC_DMA_FREE(dev, max_desc_num(qh), qh->desc_list,
-+ qh->desc_list_dma);
-+ qh->desc_list = NULL;
-+ }
-+
-+ if (qh->n_bytes) {
-+ DWC_FREE(qh->n_bytes);
-+ qh->n_bytes = NULL;
-+ }
-+}
-+
-+static int frame_list_alloc(dwc_otg_hcd_t * hcd)
-+{
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+ int retval = 0;
-+
-+ if (hcd->frame_list)
-+ return 0;
-+
-+ hcd->frame_list = DWC_DMA_ALLOC(dev, 4 * MAX_FRLIST_EN_NUM,
-+ &hcd->frame_list_dma);
-+ if (!hcd->frame_list) {
-+ retval = -DWC_E_NO_MEMORY;
-+ DWC_ERROR("%s: Frame List allocation failed\n", __func__);
-+ }
-+
-+ dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM);
-+
-+ return retval;
-+}
-+
-+static void frame_list_free(dwc_otg_hcd_t * hcd)
-+{
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+
-+ if (!hcd->frame_list)
-+ return;
-+
-+ DWC_DMA_FREE(dev, 4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma);
-+ hcd->frame_list = NULL;
-+}
-+
-+static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en)
-+{
-+
-+ hcfg_data_t hcfg;
-+
-+ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
-+
-+ if (hcfg.b.perschedena) {
-+ /* already enabled */
-+ return;
-+ }
-+
-+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr,
-+ hcd->frame_list_dma);
-+
-+ switch (fr_list_en) {
-+ case 64:
-+ hcfg.b.frlisten = 3;
-+ break;
-+ case 32:
-+ hcfg.b.frlisten = 2;
-+ break;
-+ case 16:
-+ hcfg.b.frlisten = 1;
-+ break;
-+ case 8:
-+ hcfg.b.frlisten = 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ hcfg.b.perschedena = 1;
-+
-+ DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n");
-+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+
-+}
-+
-+static void per_sched_disable(dwc_otg_hcd_t * hcd)
-+{
-+ hcfg_data_t hcfg;
-+
-+ hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
-+
-+ if (!hcfg.b.perschedena) {
-+ /* already disabled */
-+ return;
-+ }
-+ hcfg.b.perschedena = 0;
-+
-+ DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n");
-+ DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
-+}
-+
-+/*
-+ * Activates/Deactivates FrameList entries for the channel
-+ * based on endpoint servicing period.
-+ */
-+void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable)
-+{
-+ uint16_t i, j, inc;
-+ dwc_hc_t *hc = NULL;
-+
-+ if (!qh->channel) {
-+ DWC_ERROR("qh->channel = %p", qh->channel);
-+ return;
-+ }
-+
-+ if (!hcd) {
-+ DWC_ERROR("------hcd = %p", hcd);
-+ return;
-+ }
-+
-+ if (!hcd->frame_list) {
-+ DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list);
-+ return;
-+ }
-+
-+ hc = qh->channel;
-+ inc = frame_incr_val(qh);
-+ if (qh->ep_type == UE_ISOCHRONOUS)
-+ i = frame_list_idx(qh->sched_frame);
-+ else
-+ i = 0;
-+
-+ j = i;
-+ do {
-+ if (enable)
-+ hcd->frame_list[j] |= (1 << hc->hc_num);
-+ else
-+ hcd->frame_list[j] &= ~(1 << hc->hc_num);
-+ j = (j + inc) & (MAX_FRLIST_EN_NUM - 1);
-+ }
-+ while (j != i);
-+ if (!enable)
-+ return;
-+ hc->schinfo = 0;
-+ if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) {
-+ j = 1;
-+ /* TODO - check this */
-+ inc = (8 + qh->interval - 1) / qh->interval;
-+ for (i = 0; i < inc; i++) {
-+ hc->schinfo |= j;
-+ j = j << qh->interval;
-+ }
-+ } else {
-+ hc->schinfo = 0xff;
-+ }
-+}
-+
-+#if 1
-+void dump_frame_list(dwc_otg_hcd_t * hcd)
-+{
-+ int i = 0;
-+ DWC_PRINTF("--FRAME LIST (hex) --\n");
-+ for (i = 0; i < MAX_FRLIST_EN_NUM; i++) {
-+ DWC_PRINTF("%x\t", hcd->frame_list[i]);
-+ if (!(i % 8) && i)
-+ DWC_PRINTF("\n");
-+ }
-+ DWC_PRINTF("\n----\n");
-+
-+}
-+#endif
-+
-+static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ dwc_irqflags_t flags;
-+ dwc_spinlock_t *channel_lock = hcd->channel_lock;
-+
-+ dwc_hc_t *hc = qh->channel;
-+ if (dwc_qh_is_non_per(qh)) {
-+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
-+ if (!microframe_schedule)
-+ hcd->non_periodic_channels--;
-+ else
-+ hcd->available_host_channels++;
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+ } else
-+ update_frame_list(hcd, qh, 0);
-+
-+ /*
-+ * The condition is added to prevent double cleanup try in case of device
-+ * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb().
-+ */
-+ if (hc->qh) {
-+ dwc_otg_hc_cleanup(hcd->core_if, hc);
-+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
-+ hc->qh = NULL;
-+ }
-+
-+ qh->channel = NULL;
-+ qh->ntd = 0;
-+
-+ if (qh->desc_list) {
-+ dwc_memset(qh->desc_list, 0x00,
-+ sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
-+ }
-+}
-+
-+/**
-+ * Initializes a QH structure's Descriptor DMA related members.
-+ * Allocates memory for descriptor list.
-+ * On first periodic QH, allocates memory for FrameList
-+ * and enables periodic scheduling.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh The QH to init.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+ int retval = 0;
-+
-+ if (qh->do_split) {
-+ DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n");
-+ return -1;
-+ }
-+
-+ retval = desc_list_alloc(dev, qh);
-+
-+ if ((retval == 0)
-+ && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) {
-+ if (!hcd->frame_list) {
-+ retval = frame_list_alloc(hcd);
-+ /* Enable periodic schedule on first periodic QH */
-+ if (retval == 0)
-+ per_sched_enable(hcd, MAX_FRLIST_EN_NUM);
-+ }
-+ }
-+
-+ qh->ntd = 0;
-+
-+ return retval;
-+}
-+
-+/**
-+ * Frees descriptor list memory associated with the QH.
-+ * If QH is periodic and the last, frees FrameList memory
-+ * and disables periodic scheduling.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh The QH to init.
-+ */
-+void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+
-+ desc_list_free(dev, qh);
-+
-+ /*
-+ * Channel still assigned due to some reasons.
-+ * Seen on Isoc URB dequeue. Channel halted but no subsequent
-+ * ChHalted interrupt to release the channel. Afterwards
-+ * when it comes here from endpoint disable routine
-+ * channel remains assigned.
-+ */
-+ if (qh->channel)
-+ release_channel_ddma(hcd, qh);
-+
-+ if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)
-+ && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) {
-+
-+ per_sched_disable(hcd);
-+ frame_list_free(hcd);
-+ }
-+}
-+
-+static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx)
-+{
-+ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
-+ /*
-+ * Descriptor set(8 descriptors) index
-+ * which is 8-aligned.
-+ */
-+ return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8;
-+ } else {
-+ return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1));
-+ }
-+}
-+
-+/*
-+ * Determine starting frame for Isochronous transfer.
-+ * Few frames skipped to prevent race condition with HC.
-+ */
-+static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
-+ uint8_t * skip_frames)
-+{
-+ uint16_t frame = 0;
-+ hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd);
-+
-+ /* sched_frame is always frame number(not uFrame) both in FS and HS !! */
-+
-+ /*
-+ * skip_frames is used to limit activated descriptors number
-+ * to avoid the situation when HC services the last activated
-+ * descriptor firstly.
-+ * Example for FS:
-+ * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor
-+ * corresponding to curr_frame+1, the descriptor corresponding to frame 2
-+ * will be fetched. If the number of descriptors is max=64 (or greather) the
-+ * list will be fully programmed with Active descriptors and it is possible
-+ * case(rare) that the latest descriptor(considering rollback) corresponding
-+ * to frame 2 will be serviced first. HS case is more probable because, in fact,
-+ * up to 11 uframes(16 in the code) may be skipped.
-+ */
-+ if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
-+ /*
-+ * Consider uframe counter also, to start xfer asap.
-+ * If half of the frame elapsed skip 2 frames otherwise
-+ * just 1 frame.
-+ * Starting descriptor index must be 8-aligned, so
-+ * if the current frame is near to complete the next one
-+ * is skipped as well.
-+ */
-+
-+ if (dwc_micro_frame_num(hcd->frame_number) >= 5) {
-+ *skip_frames = 2 * 8;
-+ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
-+ } else {
-+ *skip_frames = 1 * 8;
-+ frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
-+ }
-+
-+ frame = dwc_full_frame_num(frame);
-+ } else {
-+ /*
-+ * Two frames are skipped for FS - the current and the next.
-+ * But for descriptor programming, 1 frame(descriptor) is enough,
-+ * see example above.
-+ */
-+ *skip_frames = 1;
-+ frame = dwc_frame_num_inc(hcd->frame_number, 2);
-+ }
-+
-+ return frame;
-+}
-+
-+/*
-+ * Calculate initial descriptor index for isochronous transfer
-+ * based on scheduled frame.
-+ */
-+static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ uint16_t frame = 0, fr_idx, fr_idx_tmp;
-+ uint8_t skip_frames = 0;
-+ /*
-+ * With current ISOC processing algorithm the channel is being
-+ * released when no more QTDs in the list(qh->ntd == 0).
-+ * Thus this function is called only when qh->ntd == 0 and qh->channel == 0.
-+ *
-+ * So qh->channel != NULL branch is not used and just not removed from the
-+ * source file. It is required for another possible approach which is,
-+ * do not disable and release the channel when ISOC session completed,
-+ * just move QH to inactive schedule until new QTD arrives.
-+ * On new QTD, the QH moved back to 'ready' schedule,
-+ * starting frame and therefore starting desc_index are recalculated.
-+ * In this case channel is released only on ep_disable.
-+ */
-+
-+ /* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */
-+ if (qh->channel) {
-+ frame = calc_starting_frame(hcd, qh, &skip_frames);
-+ /*
-+ * Calculate initial descriptor index based on FrameList current bitmap
-+ * and servicing period.
-+ */
-+ fr_idx_tmp = frame_list_idx(frame);
-+ fr_idx =
-+ (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) -
-+ fr_idx_tmp)
-+ % frame_incr_val(qh);
-+ fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM;
-+ } else {
-+ qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames);
-+ fr_idx = frame_list_idx(qh->sched_frame);
-+ }
-+
-+ qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx);
-+
-+ return skip_frames;
-+}
-+
-+#define ISOC_URB_GIVEBACK_ASAP
-+
-+#define MAX_ISOC_XFER_SIZE_FS 1023
-+#define MAX_ISOC_XFER_SIZE_HS 3072
-+#define DESCNUM_THRESHOLD 4
-+
-+static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
-+ uint8_t skip_frames)
-+{
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc;
-+ dwc_otg_qtd_t *qtd;
-+ dwc_otg_host_dma_desc_t *dma_desc;
-+ uint16_t idx, inc, n_desc, ntd_max, max_xfer_size;
-+
-+ idx = qh->td_last;
-+ inc = qh->interval;
-+ n_desc = 0;
-+
-+ ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval;
-+ if (skip_frames && !qh->channel)
-+ ntd_max = ntd_max - skip_frames / qh->interval;
-+
-+ max_xfer_size =
-+ (qh->dev_speed ==
-+ DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS :
-+ MAX_ISOC_XFER_SIZE_FS;
-+
-+ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
-+ while ((qh->ntd < ntd_max)
-+ && (qtd->isoc_frame_index_last <
-+ qtd->urb->packet_count)) {
-+
-+ dma_desc = &qh->desc_list[idx];
-+ dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t));
-+
-+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
-+
-+ if (frame_desc->length > max_xfer_size)
-+ qh->n_bytes[idx] = max_xfer_size;
-+ else
-+ qh->n_bytes[idx] = frame_desc->length;
-+ dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx];
-+ dma_desc->status.b_isoc.a = 1;
-+ dma_desc->status.b_isoc.sts = 0;
-+
-+ dma_desc->buf = qtd->urb->dma + frame_desc->offset;
-+
-+ qh->ntd++;
-+
-+ qtd->isoc_frame_index_last++;
-+
-+#ifdef ISOC_URB_GIVEBACK_ASAP
-+ /*
-+ * Set IOC for each descriptor corresponding to the
-+ * last frame of the URB.
-+ */
-+ if (qtd->isoc_frame_index_last ==
-+ qtd->urb->packet_count)
-+ dma_desc->status.b_isoc.ioc = 1;
-+
-+#endif
-+ idx = desclist_idx_inc(idx, inc, qh->dev_speed);
-+ n_desc++;
-+
-+ }
-+ qtd->in_process = 1;
-+ }
-+
-+ qh->td_last = idx;
-+
-+#ifdef ISOC_URB_GIVEBACK_ASAP
-+ /* Set IOC for the last descriptor if descriptor list is full */
-+ if (qh->ntd == ntd_max) {
-+ idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
-+ qh->desc_list[idx].status.b_isoc.ioc = 1;
-+ }
-+#else
-+ /*
-+ * Set IOC bit only for one descriptor.
-+ * Always try to be ahead of HW processing,
-+ * i.e. on IOC generation driver activates next descriptors but
-+ * core continues to process descriptors followed the one with IOC set.
-+ */
-+
-+ if (n_desc > DESCNUM_THRESHOLD) {
-+ /*
-+ * Move IOC "up". Required even if there is only one QTD
-+ * in the list, cause QTDs migth continue to be queued,
-+ * but during the activation it was only one queued.
-+ * Actually more than one QTD might be in the list if this function called
-+ * from XferCompletion - QTDs was queued during HW processing of the previous
-+ * descriptor chunk.
-+ */
-+ idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed);
-+ } else {
-+ /*
-+ * Set the IOC for the latest descriptor
-+ * if either number of descriptor is not greather than threshold
-+ * or no more new descriptors activated.
-+ */
-+ idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
-+ }
-+
-+ qh->desc_list[idx].status.b_isoc.ioc = 1;
-+#endif
-+}
-+
-+static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+
-+ dwc_hc_t *hc;
-+ dwc_otg_host_dma_desc_t *dma_desc;
-+ dwc_otg_qtd_t *qtd;
-+ int num_packets, len, n_desc = 0;
-+
-+ hc = qh->channel;
-+
-+ /*
-+ * Start with hc->xfer_buff initialized in
-+ * assign_and_init_hc(), then if SG transfer consists of multiple URBs,
-+ * this pointer re-assigned to the buffer of the currently processed QTD.
-+ * For non-SG request there is always one QTD active.
-+ */
-+
-+ DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
-+
-+ if (n_desc) {
-+ /* SG request - more than 1 QTDs */
-+ hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length;
-+ hc->xfer_len = qtd->urb->length - qtd->urb->actual_length;
-+ }
-+
-+ qtd->n_desc = 0;
-+
-+ do {
-+ dma_desc = &qh->desc_list[n_desc];
-+ len = hc->xfer_len;
-+
-+ if (len > MAX_DMA_DESC_SIZE)
-+ len = MAX_DMA_DESC_SIZE - hc->max_packet + 1;
-+
-+ if (hc->ep_is_in) {
-+ if (len > 0) {
-+ num_packets = (len + hc->max_packet - 1) / hc->max_packet;
-+ } else {
-+ /* Need 1 packet for transfer length of 0. */
-+ num_packets = 1;
-+ }
-+ /* Always program an integral # of max packets for IN transfers. */
-+ len = num_packets * hc->max_packet;
-+ }
-+
-+ dma_desc->status.b.n_bytes = len;
-+
-+ qh->n_bytes[n_desc] = len;
-+
-+ if ((qh->ep_type == UE_CONTROL)
-+ && (qtd->control_phase == DWC_OTG_CONTROL_SETUP))
-+ dma_desc->status.b.sup = 1; /* Setup Packet */
-+
-+ dma_desc->status.b.a = 1; /* Active descriptor */
-+ dma_desc->status.b.sts = 0;
-+
-+ dma_desc->buf =
-+ ((unsigned long)hc->xfer_buff & 0xffffffff);
-+
-+ /*
-+ * Last descriptor(or single) of IN transfer
-+ * with actual size less than MaxPacket.
-+ */
-+ if (len > hc->xfer_len) {
-+ hc->xfer_len = 0;
-+ } else {
-+ hc->xfer_buff += len;
-+ hc->xfer_len -= len;
-+ }
-+
-+ qtd->n_desc++;
-+ n_desc++;
-+ }
-+ while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC));
-+
-+
-+ qtd->in_process = 1;
-+
-+ if (qh->ep_type == UE_CONTROL)
-+ break;
-+
-+ if (n_desc == MAX_DMA_DESC_NUM_GENERIC)
-+ break;
-+ }
-+
-+ if (n_desc) {
-+ /* Request Transfer Complete interrupt for the last descriptor */
-+ qh->desc_list[n_desc - 1].status.b.ioc = 1;
-+ /* End of List indicator */
-+ qh->desc_list[n_desc - 1].status.b.eol = 1;
-+
-+ hc->ntd = n_desc;
-+ }
-+}
-+
-+/**
-+ * For Control and Bulk endpoints initializes descriptor list
-+ * and starts the transfer.
-+ *
-+ * For Interrupt and Isochronous endpoints initializes descriptor list
-+ * then updates FrameList, marking appropriate entries as active.
-+ * In case of Isochronous, the starting descriptor index is calculated based
-+ * on the scheduled frame, but only on the first transfer descriptor within a session.
-+ * Then starts the transfer via enabling the channel.
-+ * For Isochronous endpoint the channel is not halted on XferComplete
-+ * interrupt so remains assigned to the endpoint(QH) until session is done.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh The QH to init.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ /* Channel is already assigned */
-+ dwc_hc_t *hc = qh->channel;
-+ uint8_t skip_frames = 0;
-+
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ init_non_isoc_dma_desc(hcd, qh);
-+
-+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
-+ break;
-+ case DWC_OTG_EP_TYPE_INTR:
-+ init_non_isoc_dma_desc(hcd, qh);
-+
-+ update_frame_list(hcd, qh, 1);
-+
-+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
-+ break;
-+ case DWC_OTG_EP_TYPE_ISOC:
-+
-+ if (!qh->ntd)
-+ skip_frames = recalc_initial_desc_idx(hcd, qh);
-+
-+ init_isoc_dma_desc(hcd, qh, skip_frames);
-+
-+ if (!hc->xfer_started) {
-+
-+ update_frame_list(hcd, qh, 1);
-+
-+ /*
-+ * Always set to max, instead of actual size.
-+ * Otherwise ntd will be changed with
-+ * channel being enabled. Not recommended.
-+ *
-+ */
-+ hc->ntd = max_desc_num(qh);
-+ /* Enable channel only once for ISOC */
-+ dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
-+ }
-+
-+ break;
-+ default:
-+
-+ break;
-+ }
-+}
-+
-+static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc;
-+ dwc_otg_qtd_t *qtd, *qtd_tmp;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_host_dma_desc_t *dma_desc;
-+ uint16_t idx, remain;
-+ uint8_t urb_compl;
-+
-+ qh = hc->qh;
-+ idx = qh->td_first;
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry)
-+ qtd->in_process = 0;
-+ return;
-+ } else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) ||
-+ (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) {
-+ /*
-+ * Channel is halted in these error cases.
-+ * Considered as serious issues.
-+ * Complete all URBs marking all frames as failed,
-+ * irrespective whether some of the descriptors(frames) succeeded or no.
-+ * Pass error code to completion routine as well, to
-+ * update urb->status, some of class drivers might use it to stop
-+ * queing transfer requests.
-+ */
-+ int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR)
-+ ? (-DWC_E_IO)
-+ : (-DWC_E_OVERFLOW);
-+
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
-+ for (idx = 0; idx < qtd->urb->packet_count; idx++) {
-+ frame_desc = &qtd->urb->iso_descs[idx];
-+ frame_desc->status = err;
-+ }
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err);
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
-+ }
-+ return;
-+ }
-+
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
-+
-+ if (!qtd->in_process)
-+ break;
-+
-+ urb_compl = 0;
-+
-+ do {
-+
-+ dma_desc = &qh->desc_list[idx];
-+
-+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+ remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0;
-+
-+ if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) {
-+ /*
-+ * XactError or, unable to complete all the transactions
-+ * in the scheduled micro-frame/frame,
-+ * both indicated by DMA_DESC_STS_PKTERR.
-+ */
-+ qtd->urb->error_count++;
-+ frame_desc->actual_length = qh->n_bytes[idx] - remain;
-+ frame_desc->status = -DWC_E_PROTOCOL;
-+ } else {
-+ /* Success */
-+
-+ frame_desc->actual_length = qh->n_bytes[idx] - remain;
-+ frame_desc->status = 0;
-+ }
-+
-+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ /*
-+ * urb->status is not used for isoc transfers here.
-+ * The individual frame_desc status are used instead.
-+ */
-+
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
-+
-+ /*
-+ * This check is necessary because urb_dequeue can be called
-+ * from urb complete callback(sound driver example).
-+ * All pending URBs are dequeued there, so no need for
-+ * further processing.
-+ */
-+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
-+ return;
-+ }
-+
-+ urb_compl = 1;
-+
-+ }
-+
-+ qh->ntd--;
-+
-+ /* Stop if IOC requested descriptor reached */
-+ if (dma_desc->status.b_isoc.ioc) {
-+ idx = desclist_idx_inc(idx, qh->interval, hc->speed);
-+ goto stop_scan;
-+ }
-+
-+ idx = desclist_idx_inc(idx, qh->interval, hc->speed);
-+
-+ if (urb_compl)
-+ break;
-+ }
-+ while (idx != qh->td_first);
-+ }
-+stop_scan:
-+ qh->td_first = idx;
-+}
-+
-+uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_host_dma_desc_t * dma_desc,
-+ dwc_otg_halt_status_e halt_status,
-+ uint32_t n_bytes, uint8_t * xfer_done)
-+{
-+
-+ uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0;
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+
-+ if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
-+ urb->status = -DWC_E_IO;
-+ return 1;
-+ }
-+ if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) {
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_STALL:
-+ urb->status = -DWC_E_PIPE;
-+ break;
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ urb->status = -DWC_E_OVERFLOW;
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ urb->status = -DWC_E_PROTOCOL;
-+ break;
-+ default:
-+ DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__,
-+ halt_status);
-+ break;
-+ }
-+ return 1;
-+ }
-+
-+ if (dma_desc->status.b.a == 1) {
-+ DWC_DEBUGPL(DBG_HCDV,
-+ "Active descriptor encountered on channel %d\n",
-+ hc->hc_num);
-+ return 0;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) {
-+ if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
-+ urb->actual_length += n_bytes - remain;
-+ if (remain || urb->actual_length == urb->length) {
-+ /*
-+ * For Control Data stage do not set urb->status=0 to prevent
-+ * URB callback. Set it when Status phase done. See below.
-+ */
-+ *xfer_done = 1;
-+ }
-+
-+ } else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) {
-+ urb->status = 0;
-+ *xfer_done = 1;
-+ }
-+ /* No handling for SETUP stage */
-+ } else {
-+ /* BULK and INTR */
-+ urb->actual_length += n_bytes - remain;
-+ if (remain || urb->actual_length == urb->length) {
-+ urb->status = 0;
-+ *xfer_done = 1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ dwc_otg_hcd_urb_t *urb = NULL;
-+ dwc_otg_qtd_t *qtd, *qtd_tmp;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_host_dma_desc_t *dma_desc;
-+ uint32_t n_bytes, n_desc, i;
-+ uint8_t failed = 0, xfer_done;
-+
-+ n_desc = 0;
-+
-+ qh = hc->qh;
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
-+ qtd->in_process = 0;
-+ }
-+ return;
-+ }
-+
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
-+
-+ urb = qtd->urb;
-+
-+ n_bytes = 0;
-+ xfer_done = 0;
-+
-+ for (i = 0; i < qtd->n_desc; i++) {
-+ dma_desc = &qh->desc_list[n_desc];
-+
-+ n_bytes = qh->n_bytes[n_desc];
-+
-+ failed =
-+ update_non_isoc_urb_state_ddma(hcd, hc, qtd,
-+ dma_desc,
-+ halt_status, n_bytes,
-+ &xfer_done);
-+
-+ if (failed
-+ || (xfer_done
-+ && (urb->status != -DWC_E_IN_PROGRESS))) {
-+
-+ hcd->fops->complete(hcd, urb->priv, urb,
-+ urb->status);
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
-+
-+ if (failed)
-+ goto stop_scan;
-+ } else if (qh->ep_type == UE_CONTROL) {
-+ if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) {
-+ if (urb->length > 0) {
-+ qtd->control_phase = DWC_OTG_CONTROL_DATA;
-+ } else {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n");
-+ } else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
-+ if (xfer_done) {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n");
-+ } else if (i + 1 == qtd->n_desc) {
-+ /*
-+ * Last descriptor for Control data stage which is
-+ * not completed yet.
-+ */
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ }
-+ }
-+ }
-+
-+ n_desc++;
-+ }
-+
-+ }
-+
-+stop_scan:
-+
-+ if (qh->ep_type != UE_CONTROL) {
-+ /*
-+ * Resetting the data toggle for bulk
-+ * and interrupt endpoints in case of stall. See handle_hc_stall_intr()
-+ */
-+ if (halt_status == DWC_OTG_HC_XFER_STALL)
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ else
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ }
-+
-+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-+ hcint_data_t hcint;
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+ if (hcint.b.nyet) {
-+ /*
-+ * Got a NYET on the last transaction of the transfer. It
-+ * means that the endpoint should be in the PING state at the
-+ * beginning of the next transfer.
-+ */
-+ qh->ping_state = 1;
-+ clear_hc_int(hc_regs, nyet);
-+ }
-+
-+ }
-+
-+}
-+
-+/**
-+ * This function is called from interrupt handlers.
-+ * Scans the descriptor list, updates URB's status and
-+ * calls completion routine for the URB if it's done.
-+ * Releases the channel to be used by other transfers.
-+ * In case of Isochronous endpoint the channel is not halted until
-+ * the end of the session, i.e. QTD list is empty.
-+ * If periodic channel released the FrameList is updated accordingly.
-+ *
-+ * Calls transaction selection routines to activate pending transfers.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param hc Host channel, the transfer is completed on.
-+ * @param hc_regs Host channel registers.
-+ * @param halt_status Reason the channel is being halted,
-+ * or just XferComplete for isochronous transfer
-+ */
-+void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ uint8_t continue_isoc_xfer = 0;
-+ dwc_otg_transaction_type_e tr_type;
-+ dwc_otg_qh_t *qh = hc->qh;
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+
-+ complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
-+
-+ /* Release the channel if halted or session completed */
-+ if (halt_status != DWC_OTG_HC_XFER_COMPLETE ||
-+ DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
-+
-+ /* Halt the channel if session completed */
-+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
-+ }
-+
-+ release_channel_ddma(hcd, qh);
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ } else {
-+ /* Keep in assigned schedule to continue transfer */
-+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
-+ &qh->qh_list_entry);
-+ continue_isoc_xfer = 1;
-+
-+ }
-+ /** @todo Consider the case when period exceeds FrameList size.
-+ * Frame Rollover interrupt should be used.
-+ */
-+ } else {
-+ /* Scan descriptor list to complete the URB(s), then release the channel */
-+ complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
-+
-+ release_channel_ddma(hcd, qh);
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+
-+ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
-+ /* Add back to inactive non-periodic schedule on normal completion */
-+ dwc_otg_hcd_qh_add(hcd, qh);
-+ }
-+
-+ }
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) {
-+ if (continue_isoc_xfer) {
-+ if (tr_type == DWC_OTG_TRANSACTION_NONE) {
-+ tr_type = DWC_OTG_TRANSACTION_PERIODIC;
-+ } else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) {
-+ tr_type = DWC_OTG_TRANSACTION_ALL;
-+ }
-+ }
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
-@@ -0,0 +1,417 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $
-+ * $Revision: #12 $
-+ * $Date: 2011/10/26 $
-+ * $Change: 1873028 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+#ifndef __DWC_HCD_IF_H__
-+#define __DWC_HCD_IF_H__
-+
-+#include "dwc_otg_core_if.h"
-+
-+/** @file
-+ * This file defines DWC_OTG HCD Core API.
-+ */
-+
-+struct dwc_otg_hcd;
-+typedef struct dwc_otg_hcd dwc_otg_hcd_t;
-+
-+struct dwc_otg_hcd_urb;
-+typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t;
-+
-+/** @name HCD Function Driver Callbacks */
-+/** @{ */
-+
-+/** This function is called whenever core switches to host mode. */
-+typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd);
-+
-+/** This function is called when device has been disconnected */
-+typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd);
-+
-+/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */
-+typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
-+ void *urb_handle,
-+ uint32_t * hub_addr,
-+ uint32_t * port_addr);
-+/** Via this function HCD core gets device speed */
-+typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
-+ void *urb_handle);
-+
-+/** This function is called when urb is completed */
-+typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd,
-+ void *urb_handle,
-+ dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ int32_t status);
-+
-+/** Via this function HCD core gets b_hnp_enable parameter */
-+typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd);
-+
-+struct dwc_otg_hcd_function_ops {
-+ dwc_otg_hcd_start_cb_t start;
-+ dwc_otg_hcd_disconnect_cb_t disconnect;
-+ dwc_otg_hcd_hub_info_from_urb_cb_t hub_info;
-+ dwc_otg_hcd_speed_from_urb_cb_t speed;
-+ dwc_otg_hcd_complete_urb_cb_t complete;
-+ dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable;
-+};
-+/** @} */
-+
-+/** @name HCD Core API */
-+/** @{ */
-+/** This function allocates dwc_otg_hcd structure and returns pointer on it. */
-+extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void);
-+
-+/** This function should be called to initiate HCD Core.
-+ *
-+ * @param hcd The HCD
-+ * @param core_if The DWC_OTG Core
-+ *
-+ * Returns -DWC_E_NO_MEMORY if no enough memory.
-+ * Returns 0 on success
-+ */
-+extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if);
-+
-+/** Frees HCD
-+ *
-+ * @param hcd The HCD
-+ */
-+extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd);
-+
-+/** This function should be called on every hardware interrupt.
-+ *
-+ * @param dwc_otg_hcd The HCD
-+ *
-+ * Returns non zero if interrupt is handled
-+ * Return 0 if interrupt is not handled
-+ */
-+extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
-+
-+/** This function is used to handle the fast interrupt
-+ *
-+ */
-+extern void __attribute__ ((naked)) dwc_otg_hcd_handle_fiq(void);
-+
-+/**
-+ * Returns private data set by
-+ * dwc_otg_hcd_set_priv_data function.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Set private data.
-+ *
-+ * @param hcd The HCD
-+ * @param priv_data pointer to be stored in private data
-+ */
-+extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data);
-+
-+/**
-+ * This function initializes the HCD Core.
-+ *
-+ * @param hcd The HCD
-+ * @param fops The Function Driver Operations data structure containing pointers to all callbacks.
-+ *
-+ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode.
-+ * Returns 0 on success
-+ */
-+extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
-+ struct dwc_otg_hcd_function_ops *fops);
-+
-+/**
-+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
-+ * stopped.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Handles hub class-specific requests.
-+ *
-+ * @param dwc_otg_hcd The HCD
-+ * @param typeReq Request Type
-+ * @param wValue wValue from control request
-+ * @param wIndex wIndex from control request
-+ * @param buf data buffer
-+ * @param wLength data buffer length
-+ *
-+ * Returns -DWC_E_INVALID if invalid argument is passed
-+ * Returns 0 on success
-+ */
-+extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
-+ uint16_t typeReq, uint16_t wValue,
-+ uint16_t wIndex, uint8_t * buf,
-+ uint16_t wLength);
-+
-+/**
-+ * Returns otg port number.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Returns OTG version - either 1.3 or 2.0.
-+ *
-+ * @param core_if The core_if structure pointer
-+ */
-+extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if);
-+
-+/**
-+ * Returns 1 if currently core is acting as B host, and 0 otherwise.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Returns current frame number.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Dumps hcd state.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Dump the average frame remaining at SOF. This can be used to
-+ * determine average interrupt latency. Frame remaining is also shown for
-+ * start transfer and two additional sample points.
-+ * Currently this function is not implemented.
-+ *
-+ * @param hcd The HCD
-+ */
-+extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd);
-+
-+/**
-+ * Sends LPM transaction to the local device.
-+ *
-+ * @param hcd The HCD
-+ * @param devaddr Device Address
-+ * @param hird Host initiated resume duration
-+ * @param bRemoteWake Value of bRemoteWake field in LPM transaction
-+ *
-+ * Returns negative value if sending LPM transaction was not succeeded.
-+ * Returns 0 on success.
-+ */
-+extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr,
-+ uint8_t hird, uint8_t bRemoteWake);
-+
-+/* URB interface */
-+
-+/**
-+ * Allocates memory for dwc_otg_hcd_urb structure.
-+ * Allocated memory should be freed by call of DWC_FREE.
-+ *
-+ * @param hcd The HCD
-+ * @param iso_desc_count Count of ISOC descriptors
-+ * @param atomic_alloc Specefies whether to perform atomic allocation.
-+ */
-+extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
-+ int iso_desc_count,
-+ int atomic_alloc);
-+
-+/**
-+ * Set pipe information in URB.
-+ *
-+ * @param hcd_urb DWC_OTG URB
-+ * @param devaddr Device Address
-+ * @param ep_num Endpoint Number
-+ * @param ep_type Endpoint Type
-+ * @param ep_dir Endpoint Direction
-+ * @param mps Max Packet Size
-+ */
-+extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb,
-+ uint8_t devaddr, uint8_t ep_num,
-+ uint8_t ep_type, uint8_t ep_dir,
-+ uint16_t mps);
-+
-+/* Transfer flags */
-+#define URB_GIVEBACK_ASAP 0x1
-+#define URB_SEND_ZERO_PACKET 0x2
-+
-+/**
-+ * Sets dwc_otg_hcd_urb parameters.
-+ *
-+ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function.
-+ * @param urb_handle Unique handle for request, this will be passed back
-+ * to function driver in completion callback.
-+ * @param buf The buffer for the data
-+ * @param dma The DMA buffer for the data
-+ * @param buflen Transfer length
-+ * @param sp Buffer for setup data
-+ * @param sp_dma DMA address of setup data buffer
-+ * @param flags Transfer flags
-+ * @param interval Polling interval for interrupt or isochronous transfers.
-+ */
-+extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb,
-+ void *urb_handle, void *buf,
-+ dwc_dma_t dma, uint32_t buflen, void *sp,
-+ dwc_dma_t sp_dma, uint32_t flags,
-+ uint16_t interval);
-+
-+/** Gets status from dwc_otg_hcd_urb
-+ *
-+ * @param dwc_otg_urb DWC_OTG URB
-+ */
-+extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb);
-+
-+/** Gets actual length from dwc_otg_hcd_urb
-+ *
-+ * @param dwc_otg_urb DWC_OTG URB
-+ */
-+extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t *
-+ dwc_otg_urb);
-+
-+/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs
-+ *
-+ * @param dwc_otg_urb DWC_OTG URB
-+ */
-+extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t *
-+ dwc_otg_urb);
-+
-+/** Set ISOC descriptor offset and length
-+ *
-+ * @param dwc_otg_urb DWC_OTG URB
-+ * @param desc_num ISOC descriptor number
-+ * @param offset Offset from beginig of buffer.
-+ * @param length Transaction length
-+ */
-+extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ int desc_num, uint32_t offset,
-+ uint32_t length);
-+
-+/** Get status of ISOC descriptor, specified by desc_num
-+ *
-+ * @param dwc_otg_urb DWC_OTG URB
-+ * @param desc_num ISOC descriptor number
-+ */
-+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t *
-+ dwc_otg_urb, int desc_num);
-+
-+/** Get actual length of ISOC descriptor, specified by desc_num
-+ *
-+ * @param dwc_otg_urb DWC_OTG URB
-+ * @param desc_num ISOC descriptor number
-+ */
-+extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
-+ dwc_otg_urb,
-+ int desc_num);
-+
-+/** Queue URB. After transfer is completes, the complete callback will be called with the URB status
-+ *
-+ * @param dwc_otg_hcd The HCD
-+ * @param dwc_otg_urb DWC_OTG URB
-+ * @param ep_handle Out parameter for returning endpoint handle
-+ * @param atomic_alloc Flag to do atomic allocation if needed
-+ *
-+ * Returns -DWC_E_NO_DEVICE if no device is connected.
-+ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
-+ * Returns 0 on success.
-+ */
-+extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd,
-+ dwc_otg_hcd_urb_t * dwc_otg_urb,
-+ void **ep_handle, int atomic_alloc);
-+
-+/** De-queue the specified URB
-+ *
-+ * @param dwc_otg_hcd The HCD
-+ * @param dwc_otg_urb DWC_OTG URB
-+ */
-+extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd,
-+ dwc_otg_hcd_urb_t * dwc_otg_urb);
-+
-+/** Frees resources in the DWC_otg controller related to a given endpoint.
-+ * Any URBs for the endpoint must already be dequeued.
-+ *
-+ * @param hcd The HCD
-+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
-+ * @param retry Number of retries if there are queued transfers.
-+ *
-+ * Returns -DWC_E_INVALID if invalid arguments are passed.
-+ * Returns 0 on success
-+ */
-+extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
-+ int retry);
-+
-+/* Resets the data toggle in qh structure. This function can be called from
-+ * usb_clear_halt routine.
-+ *
-+ * @param hcd The HCD
-+ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
-+ *
-+ * Returns -DWC_E_INVALID if invalid arguments are passed.
-+ * Returns 0 on success
-+ */
-+extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle);
-+
-+/** Returns 1 if status of specified port is changed and 0 otherwise.
-+ *
-+ * @param hcd The HCD
-+ * @param port Port number
-+ */
-+extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port);
-+
-+/** Call this function to check if bandwidth was allocated for specified endpoint.
-+ * Only for ISOC and INTERRUPT endpoints.
-+ *
-+ * @param hcd The HCD
-+ * @param ep_handle Endpoint handle
-+ */
-+extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd,
-+ void *ep_handle);
-+
-+/** Call this function to check if bandwidth was freed for specified endpoint.
-+ *
-+ * @param hcd The HCD
-+ * @param ep_handle Endpoint handle
-+ */
-+extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle);
-+
-+/** Returns bandwidth allocated for specified endpoint in microseconds.
-+ * Only for ISOC and INTERRUPT endpoints.
-+ *
-+ * @param hcd The HCD
-+ * @param ep_handle Endpoint handle
-+ */
-+extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd,
-+ void *ep_handle);
-+
-+/** @} */
-+
-+#endif /* __DWC_HCD_IF_H__ */
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
-@@ -0,0 +1,2727 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
-+ * $Revision: #89 $
-+ * $Date: 2011/10/20 $
-+ * $Change: 1869487 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+#include <linux/jiffies.h>
-+#include <asm/fiq.h>
-+
-+
-+extern bool microframe_schedule;
-+
-+/** @file
-+ * This file contains the implementation of the HCD Interrupt handlers.
-+ */
-+
-+int fiq_done, int_done;
-+
-+#ifdef FIQ_DEBUG
-+char buffer[1000*16];
-+int wptr;
-+void notrace _fiq_print(FIQDBG_T dbg_lvl, char *fmt, ...)
-+{
-+ FIQDBG_T dbg_lvl_req = FIQDBG_PORTHUB;
-+ va_list args;
-+ char text[17];
-+ hfnum_data_t hfnum = { .d32 = FIQ_READ(dwc_regs_base + 0x408) };
-+
-+ if(dbg_lvl & dbg_lvl_req || dbg_lvl == FIQDBG_ERR)
-+ {
-+ local_fiq_disable();
-+ snprintf(text, 9, "%4d%d:%d ", hfnum.b.frnum/8, hfnum.b.frnum%8, 8 - hfnum.b.frrem/937);
-+ va_start(args, fmt);
-+ vsnprintf(text+8, 9, fmt, args);
-+ va_end(args);
-+
-+ memcpy(buffer + wptr, text, 16);
-+ wptr = (wptr + 16) % sizeof(buffer);
-+ local_fiq_enable();
-+ }
-+}
-+#endif
-+
-+/** This function handles interrupts for the HCD. */
-+int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ int retval = 0;
-+ static int last_time;
-+ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk;
-+ hfnum_data_t hfnum;
-+ haintmsk_data_t haintmsk;
-+
-+#ifdef DEBUG
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+
-+#endif
-+
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-+
-+ /* Exit from ISR if core is hibernated */
-+ if (core_if->hibernation_suspend == 1) {
-+ goto exit_handler_routine;
-+ }
-+ DWC_SPINLOCK(dwc_otg_hcd->lock);
-+ /* Check if HOST Mode */
-+ if (dwc_otg_is_host_mode(core_if)) {
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock);
-+ /* Pull in from the FIQ's disabled mask */
-+ gintmsk.d32 = gintmsk.d32 | ~(dwc_otg_hcd->fiq_state->gintmsk_saved.d32);
-+ dwc_otg_hcd->fiq_state->gintmsk_saved.d32 = ~0;
-+ }
-+
-+ if (fiq_fsm_enable && ( 0x0000FFFF & ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint))) {
-+ gintsts.b.hcintr = 1;
-+ }
-+
-+ /* Danger will robinson: fake a SOF if necessary */
-+ if (fiq_fsm_enable && (dwc_otg_hcd->fiq_state->gintmsk_saved.b.sofintr == 1)) {
-+ gintsts.b.sofintr = 1;
-+ }
-+ gintsts.d32 &= gintmsk.d32;
-+
-+ if (fiq_enable) {
-+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ }
-+
-+ if (!gintsts.d32) {
-+ goto exit_handler_routine;
-+ }
-+
-+#ifdef DEBUG
-+ // We should be OK doing this because the common interrupts should already have been serviced
-+ /* Don't print debug message in the interrupt handler on SOF */
-+#ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+#endif
-+ DWC_DEBUGPL(DBG_HCDI, "\n");
-+#endif
-+
-+#ifdef DEBUG
-+#ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+#endif
-+ DWC_DEBUGPL(DBG_HCDI,
-+ "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n",
-+ gintsts.d32, core_if);
-+#endif
-+ hfnum.d32 = DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->hfnum);
-+ if (gintsts.b.sofintr) {
-+ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
-+ }
-+
-+ if (gintsts.b.rxstsqlvl) {
-+ retval |=
-+ dwc_otg_hcd_handle_rx_status_q_level_intr
-+ (dwc_otg_hcd);
-+ }
-+ if (gintsts.b.nptxfempty) {
-+ retval |=
-+ dwc_otg_hcd_handle_np_tx_fifo_empty_intr
-+ (dwc_otg_hcd);
-+ }
-+ if (gintsts.b.i2cintr) {
-+ /** @todo Implement i2cintr handler. */
-+ }
-+ if (gintsts.b.portintr) {
-+
-+ gintmsk_data_t gintmsk = { .b.portintr = 1};
-+ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock);
-+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ } else {
-+ DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+ }
-+ if (gintsts.b.hcintr) {
-+ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
-+ }
-+ if (gintsts.b.ptxfempty) {
-+ retval |=
-+ dwc_otg_hcd_handle_perio_tx_fifo_empty_intr
-+ (dwc_otg_hcd);
-+ }
-+#ifdef DEBUG
-+#ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+#endif
-+ {
-+ DWC_DEBUGPL(DBG_HCDI,
-+ "DWC OTG HCD Finished Servicing Interrupts\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
-+ DWC_READ_REG32(&global_regs->gintsts));
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
-+ DWC_READ_REG32(&global_regs->gintmsk));
-+ }
-+#endif
-+
-+#ifdef DEBUG
-+#ifndef DEBUG_SOF
-+ if (gintsts.d32 != DWC_SOF_INTR_MASK)
-+#endif
-+ DWC_DEBUGPL(DBG_HCDI, "\n");
-+#endif
-+
-+ }
-+
-+exit_handler_routine:
-+ if (fiq_enable) {
-+ gintmsk_data_t gintmsk_new;
-+ haintmsk_data_t haintmsk_new;
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock);
-+ gintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->gintmsk_saved.d32;
-+ if(fiq_fsm_enable)
-+ haintmsk_new.d32 = *(volatile uint32_t *)&dwc_otg_hcd->fiq_state->haintmsk_saved.d32;
-+ else
-+ haintmsk_new.d32 = 0x0000FFFF;
-+
-+ /* The FIQ could have sneaked another interrupt in. If so, don't clear MPHI */
-+ if ((gintmsk_new.d32 == ~0) && (haintmsk_new.d32 == 0x0000FFFF)) {
-+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.intstat, (1<<16));
-+ if (dwc_otg_hcd->fiq_state->mphi_int_count >= 50) {
-+ fiq_print(FIQDBG_INT, dwc_otg_hcd->fiq_state, "MPHI CLR");
-+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, ((1<<31) + (1<<16)));
-+ while (!(DWC_READ_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & (1 << 17)))
-+ ;
-+ DWC_WRITE_REG32(dwc_otg_hcd->fiq_state->mphi_regs.ctrl, (1<<31));
-+ dwc_otg_hcd->fiq_state->mphi_int_count = 0;
-+ }
-+ int_done++;
-+ }
-+ haintmsk.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk);
-+ /* Re-enable interrupts that the FIQ masked (first time round) */
-+ FIQ_WRITE(dwc_otg_hcd->fiq_state->dwc_regs_base + GINTMSK, gintmsk.d32);
-+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock);
-+ local_fiq_enable();
-+
-+ if ((jiffies / HZ) > last_time) {
-+ //dwc_otg_qh_t *qh;
-+ //dwc_list_link_t *cur;
-+ /* Once a second output the fiq and irq numbers, useful for debug */
-+ last_time = jiffies / HZ;
-+ // DWC_WARN("np_kick=%d AHC=%d sched_frame=%d cur_frame=%d int_done=%d fiq_done=%d",
-+ // dwc_otg_hcd->fiq_state->kick_np_queues, dwc_otg_hcd->available_host_channels,
-+ // dwc_otg_hcd->fiq_state->next_sched_frame, hfnum.b.frnum, int_done, dwc_otg_hcd->fiq_state->fiq_done);
-+ //printk(KERN_WARNING "Periodic queues:\n");
-+ }
-+ }
-+
-+ DWC_SPINUNLOCK(dwc_otg_hcd->lock);
-+ return retval;
-+}
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+
-+#warning Compiling code to track missed SOFs
-+#define FRAME_NUM_ARRAY_SIZE 1000
-+/**
-+ * This function is for debug only.
-+ */
-+static inline void track_missed_sofs(uint16_t curr_frame_number)
-+{
-+ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
-+ static int frame_num_idx = 0;
-+ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
-+ static int dumped_frame_num_array = 0;
-+
-+ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
-+ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) !=
-+ curr_frame_number) {
-+ frame_num_array[frame_num_idx] = curr_frame_number;
-+ last_frame_num_array[frame_num_idx++] = last_frame_num;
-+ }
-+ } else if (!dumped_frame_num_array) {
-+ int i;
-+ DWC_PRINTF("Frame Last Frame\n");
-+ DWC_PRINTF("----- ----------\n");
-+ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
-+ DWC_PRINTF("0x%04x 0x%04x\n",
-+ frame_num_array[i], last_frame_num_array[i]);
-+ }
-+ dumped_frame_num_array = 1;
-+ }
-+ last_frame_num = curr_frame_number;
-+}
-+#endif
-+
-+/**
-+ * Handles the start-of-frame interrupt in host mode. Non-periodic
-+ * transactions may be queued to the DWC_otg controller for the current
-+ * (micro)frame. Periodic transactions may be queued to the controller for the
-+ * next (micro)frame.
-+ */
-+int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd)
-+{
-+ hfnum_data_t hfnum;
-+ gintsts_data_t gintsts = { .d32 = 0 };
-+ dwc_list_link_t *qh_entry;
-+ dwc_otg_qh_t *qh;
-+ dwc_otg_transaction_type_e tr_type;
-+ int did_something = 0;
-+ int32_t next_sched_frame = -1;
-+
-+ hfnum.d32 =
-+ DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
-+
-+#ifdef DEBUG_SOF
-+ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
-+#endif
-+ hcd->frame_number = hfnum.b.frnum;
-+
-+#ifdef DEBUG
-+ hcd->frrem_accum += hfnum.b.frrem;
-+ hcd->frrem_samples++;
-+#endif
-+
-+#ifdef DWC_TRACK_MISSED_SOFS
-+ track_missed_sofs(hcd->frame_number);
-+#endif
-+ /* Determine whether any periodic QHs should be executed. */
-+ qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive);
-+ while (qh_entry != &hcd->periodic_sched_inactive) {
-+ qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry);
-+ qh_entry = qh_entry->next;
-+ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
-+
-+ /*
-+ * Move QH to the ready list to be executed next
-+ * (micro)frame.
-+ */
-+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
-+ &qh->qh_list_entry);
-+
-+ did_something = 1;
-+ }
-+ else
-+ {
-+ if(next_sched_frame < 0 || dwc_frame_num_le(qh->sched_frame, next_sched_frame))
-+ {
-+ next_sched_frame = qh->sched_frame;
-+ }
-+ }
-+ }
-+ if (fiq_enable)
-+ hcd->fiq_state->next_sched_frame = next_sched_frame;
-+
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ did_something = 1;
-+ }
-+
-+ /* Clear interrupt - but do not trample on the FIQ sof */
-+ if (!fiq_fsm_enable) {
-+ gintsts.b.sofintr = 1;
-+ DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
-+ }
-+ return 1;
-+}
-+
-+/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
-+ * least one packet in the Rx FIFO. The packets are moved from the FIFO to
-+ * memory if the DWC_otg controller is operating in Slave mode. */
-+int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ host_grxsts_data_t grxsts;
-+ dwc_hc_t *hc = NULL;
-+
-+ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
-+
-+ grxsts.d32 =
-+ DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
-+
-+ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
-+ if (!hc) {
-+ DWC_ERROR("Unable to get corresponding channel\n");
-+ return 0;
-+ }
-+
-+ /* Packet Status */
-+ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum);
-+ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid,
-+ hc->data_pid_start);
-+ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts);
-+
-+ switch (grxsts.b.pktsts) {
-+ case DWC_GRXSTS_PKTSTS_IN:
-+ /* Read the data into the host buffer. */
-+ if (grxsts.b.bcnt > 0) {
-+ dwc_otg_read_packet(dwc_otg_hcd->core_if,
-+ hc->xfer_buff, grxsts.b.bcnt);
-+
-+ /* Update the HC fields for the next packet received. */
-+ hc->xfer_count += grxsts.b.bcnt;
-+ hc->xfer_buff += grxsts.b.bcnt;
-+ }
-+
-+ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
-+ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
-+ case DWC_GRXSTS_PKTSTS_CH_HALTED:
-+ /* Handled in interrupt, just ignore data */
-+ break;
-+ default:
-+ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n",
-+ grxsts.b.pktsts);
-+ break;
-+ }
-+
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
-+ * data packets may be written to the FIFO for OUT transfers. More requests
-+ * may be written to the non-periodic request queue for IN transfers. This
-+ * interrupt is enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_NON_PERIODIC);
-+ return 1;
-+}
-+
-+/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
-+ * packets may be written to the FIFO for OUT transfers. More requests may be
-+ * written to the periodic request queue for IN transfers. This interrupt is
-+ * enabled only in Slave mode. */
-+int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
-+ dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
-+ DWC_OTG_TRANSACTION_PERIODIC);
-+ return 1;
-+}
-+
-+/** There are multiple conditions that can cause a port interrupt. This function
-+ * determines which interrupt conditions have occurred and handles them
-+ * appropriately. */
-+int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ int retval = 0;
-+ hprt0_data_t hprt0;
-+ hprt0_data_t hprt0_modify;
-+
-+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
-+ hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
-+
-+ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ hprt0_modify.b.prtena = 0;
-+ hprt0_modify.b.prtconndet = 0;
-+ hprt0_modify.b.prtenchng = 0;
-+ hprt0_modify.b.prtovrcurrchng = 0;
-+
-+ /* Port Connect Detected
-+ * Set flag and clear if detected */
-+ if (dwc_otg_hcd->core_if->hibernation_suspend == 1) {
-+ // Dont modify port status if we are in hibernation state
-+ hprt0_modify.b.prtconndet = 1;
-+ hprt0_modify.b.prtenchng = 1;
-+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
-+ return retval;
-+ }
-+
-+ if (hprt0.b.prtconndet) {
-+ /** @todo - check if steps performed in 'else' block should be perfromed regardles adp */
-+ if (dwc_otg_hcd->core_if->adp_enable &&
-+ dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) {
-+ DWC_PRINTF("PORT CONNECT DETECTED ----------------\n");
-+ DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer);
-+ dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
-+ /* TODO - check if this is required, as
-+ * host initialization was already performed
-+ * after initial ADP probing
-+ */
-+ /*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
-+ dwc_otg_core_init(dwc_otg_hcd->core_if);
-+ dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if);
-+ cil_hcd_start(dwc_otg_hcd->core_if);*/
-+ } else {
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
-+ "Port Connect Detected--\n", hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_connect_status_change = 1;
-+ dwc_otg_hcd->flags.b.port_connect_status = 1;
-+ hprt0_modify.b.prtconndet = 1;
-+
-+ /* B-Device has connected, Delete the connection timer. */
-+ DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer);
-+ }
-+ /* The Hub driver asserts a reset when it sees port connect
-+ * status change flag */
-+ retval |= 1;
-+ }
-+
-+ /* Port Enable Changed
-+ * Clear if detected - Set internal flag if disabled */
-+ if (hprt0.b.prtenchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Enable Changed--\n", hprt0.d32);
-+ hprt0_modify.b.prtenchng = 1;
-+ if (hprt0.b.prtena == 1) {
-+ hfir_data_t hfir;
-+ int do_reset = 0;
-+ dwc_otg_core_params_t *params =
-+ dwc_otg_hcd->core_if->core_params;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ dwc_otg_hcd->core_if->core_global_regs;
-+ dwc_otg_host_if_t *host_if =
-+ dwc_otg_hcd->core_if->host_if;
-+
-+ /* Every time when port enables calculate
-+ * HFIR.FrInterval
-+ */
-+ hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
-+ hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if);
-+ DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
-+
-+ /* Check if we need to adjust the PHY clock speed for
-+ * low power and adjust it */
-+ if (params->host_support_fs_ls_low_power) {
-+ gusbcfg_data_t usbcfg;
-+
-+ usbcfg.d32 =
-+ DWC_READ_REG32(&global_regs->gusbcfg);
-+
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED
-+ || hprt0.b.prtspd ==
-+ DWC_HPRT0_PRTSPD_FULL_SPEED) {
-+ /*
-+ * Low power
-+ */
-+ hcfg_data_t hcfg;
-+ if (usbcfg.b.phylpwrclksel == 0) {
-+ /* Set PHY low power clock select for FS/LS devices */
-+ usbcfg.b.phylpwrclksel = 1;
-+ DWC_WRITE_REG32
-+ (&global_regs->gusbcfg,
-+ usbcfg.d32);
-+ do_reset = 1;
-+ }
-+
-+ hcfg.d32 =
-+ DWC_READ_REG32
-+ (&host_if->host_global_regs->hcfg);
-+
-+ if (hprt0.b.prtspd ==
-+ DWC_HPRT0_PRTSPD_LOW_SPEED
-+ && params->host_ls_low_power_phy_clk
-+ ==
-+ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)
-+ {
-+ /* 6 MHZ */
-+ DWC_DEBUGPL(DBG_CIL,
-+ "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
-+ if (hcfg.b.fslspclksel !=
-+ DWC_HCFG_6_MHZ) {
-+ hcfg.b.fslspclksel =
-+ DWC_HCFG_6_MHZ;
-+ DWC_WRITE_REG32
-+ (&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ } else {
-+ /* 48 MHZ */
-+ DWC_DEBUGPL(DBG_CIL,
-+ "FS_PHY programming HCFG to 48 MHz ()\n");
-+ if (hcfg.b.fslspclksel !=
-+ DWC_HCFG_48_MHZ) {
-+ hcfg.b.fslspclksel =
-+ DWC_HCFG_48_MHZ;
-+ DWC_WRITE_REG32
-+ (&host_if->host_global_regs->hcfg,
-+ hcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+ } else {
-+ /*
-+ * Not low power
-+ */
-+ if (usbcfg.b.phylpwrclksel == 1) {
-+ usbcfg.b.phylpwrclksel = 0;
-+ DWC_WRITE_REG32
-+ (&global_regs->gusbcfg,
-+ usbcfg.d32);
-+ do_reset = 1;
-+ }
-+ }
-+
-+ if (do_reset) {
-+ DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet);
-+ }
-+ }
-+
-+ if (!do_reset) {
-+ /* Port has been enabled set the reset change flag */
-+ dwc_otg_hcd->flags.b.port_reset_change = 1;
-+ }
-+ } else {
-+ dwc_otg_hcd->flags.b.port_enable_change = 1;
-+ }
-+ retval |= 1;
-+ }
-+
-+ /** Overcurrent Change Interrupt */
-+ if (hprt0.b.prtovrcurrchng) {
-+ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x "
-+ "Port Overcurrent Changed--\n", hprt0.d32);
-+ dwc_otg_hcd->flags.b.port_over_current_change = 1;
-+ hprt0_modify.b.prtovrcurrchng = 1;
-+ retval |= 1;
-+ }
-+
-+ /* Clear Port Interrupts */
-+ DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
-+
-+ return retval;
-+}
-+
-+/** This interrupt indicates that one or more host channels has a pending
-+ * interrupt. There are multiple conditions that can cause each host channel
-+ * interrupt. This function determines which conditions have occurred for each
-+ * host channel interrupt and handles them appropriately. */
-+int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ int i;
-+ int retval = 0;
-+ haint_data_t haint = { .d32 = 0 } ;
-+
-+ /* Clear appropriate bits in HCINTn to clear the interrupt bit in
-+ * GINTSTS */
-+
-+ if (!fiq_fsm_enable)
-+ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
-+
-+ // Overwrite with saved interrupts from fiq handler
-+ if(fiq_fsm_enable)
-+ {
-+ /* check the mask? */
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&dwc_otg_hcd->fiq_state->lock);
-+ haint.b2.chint |= ~(dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint);
-+ dwc_otg_hcd->fiq_state->haintmsk_saved.b2.chint = ~0;
-+ fiq_fsm_spin_unlock(&dwc_otg_hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ }
-+
-+ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
-+ if (haint.b2.chint & (1 << i)) {
-+ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
-+ }
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * Gets the actual length of a transfer after the transfer halts. _halt_status
-+ * holds the reason for the halt.
-+ *
-+ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
-+ * *short_read is set to 1 upon return if less than the requested
-+ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
-+ * return. short_read may also be NULL on entry, in which case it remains
-+ * unchanged.
-+ */
-+static uint32_t get_actual_xfer_length(dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_halt_status_e halt_status,
-+ int *short_read)
-+{
-+ hctsiz_data_t hctsiz;
-+ uint32_t length;
-+
-+ if (short_read != NULL) {
-+ *short_read = 0;
-+ }
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+
-+ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
-+ if (hc->ep_is_in) {
-+ length = hc->xfer_len - hctsiz.b.xfersize;
-+ if (short_read != NULL) {
-+ *short_read = (hctsiz.b.xfersize != 0);
-+ }
-+ } else if (hc->qh->do_split) {
-+ //length = split_out_xfersize[hc->hc_num];
-+ length = qtd->ssplit_out_xfer_count;
-+ } else {
-+ length = hc->xfer_len;
-+ }
-+ } else {
-+ /*
-+ * Must use the hctsiz.pktcnt field to determine how much data
-+ * has been transferred. This field reflects the number of
-+ * packets that have been transferred via the USB. This is
-+ * always an integral number of packets if the transfer was
-+ * halted before its normal completion. (Can't use the
-+ * hctsiz.xfersize field because that reflects the number of
-+ * bytes transferred via the AHB, not the USB).
-+ */
-+ length =
-+ (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
-+ }
-+
-+ return length;
-+}
-+
-+/**
-+ * Updates the state of the URB after a Transfer Complete interrupt on the
-+ * host channel. Updates the actual_length field of the URB based on the
-+ * number of bytes transferred via the host channel. Sets the URB status
-+ * if the data transfer is finished.
-+ *
-+ * @return 1 if the data transfer specified by the URB is completely finished,
-+ * 0 otherwise.
-+ */
-+static int update_urb_state_xfer_comp(dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_hcd_urb_t * urb,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ int xfer_done = 0;
-+ int short_read = 0;
-+
-+ int xfer_length;
-+
-+ xfer_length = get_actual_xfer_length(hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE,
-+ &short_read);
-+
-+ if (urb->actual_length + xfer_length > urb->length) {
-+ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n",
-+ hc->dev_addr, __func__, __LINE__);
-+ xfer_length = urb->length - urb->actual_length;
-+ }
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (hc->align_buff && xfer_length && hc->ep_is_in) {
-+ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
-+ xfer_length);
-+ }
-+
-+ urb->actual_length += xfer_length;
-+
-+ if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) &&
-+ (urb->flags & URB_SEND_ZERO_PACKET)
-+ && (urb->actual_length == urb->length)
-+ && !(urb->length % hc->max_packet)) {
-+ xfer_done = 0;
-+ } else if (short_read || urb->actual_length >= urb->length) {
-+ xfer_done = 1;
-+ urb->status = 0;
-+ }
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (hc->ep_is_in ? "IN" : "OUT"),
-+ hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n",
-+ hctsiz.b.xfersize);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ urb->length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n",
-+ urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n",
-+ short_read, xfer_done);
-+ }
-+#endif
-+
-+ return xfer_done;
-+}
-+
-+/*
-+ * Save the starting data toggle for the next transfer. The data toggle is
-+ * saved in the QH for non-control transfers and it's saved in the QTD for
-+ * control transfers.
-+ */
-+void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd)
-+{
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
-+ dwc_otg_qh_t *qh = hc->qh;
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ } else {
-+ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ } else {
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ }
-+ }
-+}
-+
-+/**
-+ * Updates the state of an Isochronous URB when the transfer is stopped for
-+ * any reason. The fields of the current entry in the frame descriptor array
-+ * are set based on the transfer state and the input _halt_status. Completes
-+ * the Isochronous URB if all the URB frames have been completed.
-+ *
-+ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
-+ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
-+ */
-+static dwc_otg_halt_status_e
-+update_isoc_urb_state(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
-+{
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+ dwc_otg_halt_status_e ret_val = halt_status;
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc;
-+
-+ frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_COMPLETE:
-+ frame_desc->status = 0;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
-+ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
-+ hc->qh->dw_align_buf, frame_desc->actual_length);
-+ }
-+
-+ break;
-+ case DWC_OTG_HC_XFER_FRAME_OVERRUN:
-+ urb->error_count++;
-+ if (hc->ep_is_in) {
-+ frame_desc->status = -DWC_E_NO_STREAM_RES;
-+ } else {
-+ frame_desc->status = -DWC_E_COMMUNICATION;
-+ }
-+ frame_desc->actual_length = 0;
-+ break;
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ urb->error_count++;
-+ frame_desc->status = -DWC_E_OVERFLOW;
-+ /* Don't need to update actual_length in this case. */
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ urb->error_count++;
-+ frame_desc->status = -DWC_E_PROTOCOL;
-+ frame_desc->actual_length =
-+ get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
-+ dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
-+ hc->qh->dw_align_buf, frame_desc->actual_length);
-+ }
-+ /* Skip whole frame */
-+ if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) &&
-+ hc->ep_is_in && hcd->core_if->dma_enable) {
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_offset = 0;
-+ }
-+
-+ break;
-+ default:
-+ DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status);
-+ break;
-+ }
-+ if (++qtd->isoc_frame_index == urb->packet_count) {
-+ /*
-+ * urb->status is not used for isoc transfers.
-+ * The individual frame_desc statuses are used instead.
-+ */
-+ hcd->fops->complete(hcd, urb->priv, urb, 0);
-+ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ ret_val = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+ return ret_val;
-+}
-+
-+/**
-+ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
-+ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
-+ * still linked to the QH, the QH is added to the end of the inactive
-+ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
-+ * schedule if no more QTDs are linked to the QH.
-+ */
-+static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd)
-+{
-+ int continue_split = 0;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
-+
-+ qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
-+
-+ if (qtd->complete_split) {
-+ continue_split = 1;
-+ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
-+ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
-+ continue_split = 1;
-+ }
-+
-+ if (free_qtd) {
-+ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
-+ continue_split = 0;
-+ }
-+
-+ qh->channel = NULL;
-+ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
-+}
-+
-+/**
-+ * Releases a host channel for use by other transfers. Attempts to select and
-+ * queue more transactions since at least one host channel is available.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param hc The host channel to release.
-+ * @param qtd The QTD associated with the host channel. This QTD may be freed
-+ * if the transfer is complete or an error has occurred.
-+ * @param halt_status Reason the channel is being released. This status
-+ * determines the actions taken by this function.
-+ */
-+static void release_channel(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ dwc_otg_transaction_type_e tr_type;
-+ int free_qtd;
-+ dwc_irqflags_t flags;
-+ dwc_spinlock_t *channel_lock = hcd->channel_lock;
-+
-+ int hog_port = 0;
-+
-+ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d, xfer_len %d\n",
-+ __func__, hc->hc_num, halt_status, hc->xfer_len);
-+
-+ if(fiq_fsm_enable && hc->do_split) {
-+ if(!hc->ep_is_in && hc->ep_type == UE_ISOCHRONOUS) {
-+ if(hc->xact_pos == DWC_HCSPLIT_XACTPOS_MID ||
-+ hc->xact_pos == DWC_HCSPLIT_XACTPOS_BEGIN) {
-+ hog_port = 0;
-+ }
-+ }
-+ }
-+
-+ switch (halt_status) {
-+ case DWC_OTG_HC_XFER_URB_COMPLETE:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_AHB_ERR:
-+ case DWC_OTG_HC_XFER_STALL:
-+ case DWC_OTG_HC_XFER_BABBLE_ERR:
-+ free_qtd = 1;
-+ break;
-+ case DWC_OTG_HC_XFER_XACT_ERR:
-+ if (qtd->error_count >= 3) {
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " Complete URB with transaction error\n");
-+ free_qtd = 1;
-+ qtd->urb->status = -DWC_E_PROTOCOL;
-+ hcd->fops->complete(hcd, qtd->urb->priv,
-+ qtd->urb, -DWC_E_PROTOCOL);
-+ } else {
-+ free_qtd = 0;
-+ }
-+ break;
-+ case DWC_OTG_HC_XFER_URB_DEQUEUE:
-+ /*
-+ * The QTD has already been removed and the QH has been
-+ * deactivated. Don't want to do anything except release the
-+ * host channel and try to queue more transfers.
-+ */
-+ goto cleanup;
-+ case DWC_OTG_HC_XFER_NO_HALT_STATUS:
-+ free_qtd = 0;
-+ break;
-+ case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE:
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " Complete URB with I/O error\n");
-+ free_qtd = 1;
-+ qtd->urb->status = -DWC_E_IO;
-+ hcd->fops->complete(hcd, qtd->urb->priv,
-+ qtd->urb, -DWC_E_IO);
-+ break;
-+ default:
-+ free_qtd = 0;
-+ break;
-+ }
-+
-+ deactivate_qh(hcd, hc->qh, free_qtd);
-+
-+cleanup:
-+ /*
-+ * Release the host channel for use by other transfers. The cleanup
-+ * function clears the channel interrupt enables and conditions, so
-+ * there's no need to clear the Channel Halted interrupt separately.
-+ */
-+ if (fiq_fsm_enable && hcd->fiq_state->channel[hc->hc_num].fsm != FIQ_PASSTHROUGH)
-+ dwc_otg_cleanup_fiq_channel(hcd, hc->hc_num);
-+ dwc_otg_hc_cleanup(hcd->core_if, hc);
-+ DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
-+
-+ if (!microframe_schedule) {
-+ switch (hc->ep_type) {
-+ case DWC_OTG_EP_TYPE_CONTROL:
-+ case DWC_OTG_EP_TYPE_BULK:
-+ hcd->non_periodic_channels--;
-+ break;
-+
-+ default:
-+ /*
-+ * Don't release reservations for periodic channels here.
-+ * That's done when a periodic transfer is descheduled (i.e.
-+ * when the QH is removed from the periodic schedule).
-+ */
-+ break;
-+ }
-+ } else {
-+
-+ DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
-+ hcd->available_host_channels++;
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "AHC = %d ", hcd->available_host_channels);
-+ DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
-+ }
-+
-+ /* Try to queue more transfers now that there's a free channel. */
-+ tr_type = dwc_otg_hcd_select_transactions(hcd);
-+ if (tr_type != DWC_OTG_TRANSACTION_NONE) {
-+ dwc_otg_hcd_queue_transactions(hcd, tr_type);
-+ }
-+}
-+
-+/**
-+ * Halts a host channel. If the channel cannot be halted immediately because
-+ * the request queue is full, this function ensures that the FIFO empty
-+ * interrupt for the appropriate queue is enabled so that the halt request can
-+ * be queued when there is space in the request queue.
-+ *
-+ * This function may also be called in DMA mode. In that case, the channel is
-+ * simply released since the core always halts the channel automatically in
-+ * DMA mode.
-+ */
-+static void halt_channel(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
-+{
-+ if (hcd->core_if->dma_enable) {
-+ release_channel(hcd, hc, qtd, halt_status);
-+ return;
-+ }
-+
-+ /* Slave mode processing... */
-+ dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
-+
-+ if (hc->halt_on_queue) {
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+ dwc_otg_core_global_regs_t *global_regs;
-+ global_regs = hcd->core_if->core_global_regs;
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
-+ /*
-+ * Make sure the Non-periodic Tx FIFO empty interrupt
-+ * is enabled so that the non-periodic schedule will
-+ * be processed.
-+ */
-+ gintmsk.b.nptxfempty = 1;
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ } else {
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+ } else {
-+ /*
-+ * Move the QH from the periodic queued schedule to
-+ * the periodic assigned schedule. This allows the
-+ * halt to be queued when the periodic schedule is
-+ * processed.
-+ */
-+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
-+ &hc->qh->qh_list_entry);
-+
-+ /*
-+ * Make sure the Periodic Tx FIFO Empty interrupt is
-+ * enabled so that the periodic schedule will be
-+ * processed.
-+ */
-+ gintmsk.b.ptxfempty = 1;
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ } else {
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for non-periodic transfers after a Transfer
-+ * Complete interrupt. This function should be called after any endpoint type
-+ * specific handling is finished to release the host channel.
-+ */
-+static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ hcint_data_t hcint;
-+
-+ qtd->error_count = 0;
-+
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+ if (hcint.b.nyet) {
-+ /*
-+ * Got a NYET on the last transaction of the transfer. This
-+ * means that the endpoint should be in the PING state at the
-+ * beginning of the next transfer.
-+ */
-+ hc->qh->ping_state = 1;
-+ clear_hc_int(hc_regs, nyet);
-+ }
-+
-+ /*
-+ * Always halt and release the host channel to make it available for
-+ * more transfers. There may still be more phases for a control
-+ * transfer or more data packets for a bulk transfer at this point,
-+ * but the host channel is still halted. A channel will be reassigned
-+ * to the transfer when the non-periodic schedule is processed after
-+ * the channel is released. This allows transactions to be queued
-+ * properly via dwc_otg_hcd_queue_transactions, which also enables the
-+ * Tx FIFO Empty interrupt if necessary.
-+ */
-+ if (hc->ep_is_in) {
-+ /*
-+ * IN transfers in Slave mode require an explicit disable to
-+ * halt the channel. (In DMA mode, this call simply releases
-+ * the channel.)
-+ */
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ } else {
-+ /*
-+ * The channel is automatically disabled by the core for OUT
-+ * transfers in Slave mode.
-+ */
-+ release_channel(hcd, hc, qtd, halt_status);
-+ }
-+}
-+
-+/**
-+ * Performs common cleanup for periodic transfers after a Transfer Complete
-+ * interrupt. This function should be called after any endpoint type specific
-+ * handling is finished to release the host channel.
-+ */
-+static void complete_periodic_xfer(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ hctsiz_data_t hctsiz;
-+ qtd->error_count = 0;
-+
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
-+ /* Core halts channel in these cases. */
-+ release_channel(hcd, hc, qtd, halt_status);
-+ } else {
-+ /* Flush any outstanding requests from the Tx queue. */
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+}
-+
-+static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ uint32_t len;
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc;
-+ frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+
-+ len = get_actual_xfer_length(hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE, NULL);
-+
-+ if (!len) {
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_offset = 0;
-+ return 0;
-+ }
-+ frame_desc->actual_length += len;
-+
-+ if (hc->align_buff && len)
-+ dwc_memcpy(qtd->urb->buf + frame_desc->offset +
-+ qtd->isoc_split_offset, hc->qh->dw_align_buf, len);
-+ qtd->isoc_split_offset += len;
-+
-+ if (frame_desc->length == frame_desc->actual_length) {
-+ frame_desc->status = 0;
-+ qtd->isoc_frame_index++;
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_offset = 0;
-+ }
-+
-+ if (qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ }
-+
-+ return 1; /* Indicates that channel released */
-+}
-+
-+/**
-+ * Handles a host channel Transfer Complete interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ int urb_xfer_done;
-+ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
-+
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "Transfer Complete--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_desc_enable) {
-+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status);
-+ if (pipe_type == UE_ISOCHRONOUS) {
-+ /* Do not disable the interrupt, just clear it */
-+ clear_hc_int(hc_regs, xfercomp);
-+ return 1;
-+ }
-+ goto handle_xfercomp_done;
-+ }
-+
-+ /*
-+ * Handle xfer complete on CSPLIT.
-+ */
-+
-+ if (hc->qh->do_split) {
-+ if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in
-+ && hcd->core_if->dma_enable) {
-+ if (qtd->complete_split
-+ && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs,
-+ qtd))
-+ goto handle_xfercomp_done;
-+ } else {
-+ qtd->complete_split = 0;
-+ }
-+ }
-+
-+ /* Update the QTD and URB states. */
-+ switch (pipe_type) {
-+ case UE_CONTROL:
-+ switch (qtd->control_phase) {
-+ case DWC_OTG_CONTROL_SETUP:
-+ if (urb->length > 0) {
-+ qtd->control_phase = DWC_OTG_CONTROL_DATA;
-+ } else {
-+ qtd->control_phase = DWC_OTG_CONTROL_STATUS;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " Control setup transaction done\n");
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ case DWC_OTG_CONTROL_DATA:{
-+ urb_xfer_done =
-+ update_urb_state_xfer_comp(hc, hc_regs, urb,
-+ qtd);
-+ if (urb_xfer_done) {
-+ qtd->control_phase =
-+ DWC_OTG_CONTROL_STATUS;
-+ DWC_DEBUGPL(DBG_HCDV,
-+ " Control data transfer done\n");
-+ } else {
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ }
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ break;
-+ }
-+ case DWC_OTG_CONTROL_STATUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n");
-+ if (urb->status == -DWC_E_IN_PROGRESS) {
-+ urb->status = 0;
-+ }
-+ hcd->fops->complete(hcd, urb->priv, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ break;
-+ }
-+
-+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case UE_BULK:
-+ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n");
-+ urb_xfer_done =
-+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+ if (urb_xfer_done) {
-+ hcd->fops->complete(hcd, urb->priv, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case UE_INTERRUPT:
-+ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n");
-+ urb_xfer_done =
-+ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
-+
-+ /*
-+ * Interrupt URB is done on the first transfer complete
-+ * interrupt.
-+ */
-+ if (urb_xfer_done) {
-+ hcd->fops->complete(hcd, urb->priv, urb, urb->status);
-+ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
-+ } else {
-+ halt_status = DWC_OTG_HC_XFER_COMPLETE;
-+ }
-+
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ case UE_ISOCHRONOUS:
-+ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n");
-+ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
-+ halt_status =
-+ update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
-+ break;
-+ }
-+
-+handle_xfercomp_done:
-+ disable_hc_int(hc_regs, xfercompl);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel STALL interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+ int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
-+
-+ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
-+ "STALL Received--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_desc_enable) {
-+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL);
-+ goto handle_stall_done;
-+ }
-+
-+ if (pipe_type == UE_CONTROL) {
-+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
-+ }
-+
-+ if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) {
-+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
-+ /*
-+ * USB protocol requires resetting the data toggle for bulk
-+ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
-+ * setup command is issued to the endpoint. Anticipate the
-+ * CLEAR_FEATURE command since a STALL has occurred and reset
-+ * the data toggle now.
-+ */
-+ hc->qh->data_toggle = 0;
-+ }
-+
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
-+
-+handle_stall_done:
-+ disable_hc_int(hc_regs, stall);
-+
-+ return 1;
-+}
-+
-+/*
-+ * Updates the state of the URB when a transfer has been stopped due to an
-+ * abnormal condition before the transfer completes. Modifies the
-+ * actual_length field of the URB to reflect the number of bytes that have
-+ * actually been transferred via the host channel.
-+ */
-+static void update_urb_state_xfer_intr(dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_hcd_urb_t * urb,
-+ dwc_otg_qtd_t * qtd,
-+ dwc_otg_halt_status_e halt_status)
-+{
-+ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
-+ halt_status, NULL);
-+
-+ if (urb->actual_length + bytes_transferred > urb->length) {
-+ printk_once(KERN_DEBUG "dwc_otg: DEVICE:%03d : %s:%d:trimming xfer length\n",
-+ hc->dev_addr, __func__, __LINE__);
-+ bytes_transferred = urb->length - urb->actual_length;
-+ }
-+
-+ /* non DWORD-aligned buffer case handling. */
-+ if (hc->align_buff && bytes_transferred && hc->ep_is_in) {
-+ dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
-+ bytes_transferred);
-+ }
-+
-+ urb->actual_length += bytes_transferred;
-+
-+#ifdef DEBUG
-+ {
-+ hctsiz_data_t hctsiz;
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
-+ __func__, (hc->ep_is_in ? "IN" : "OUT"),
-+ hc->hc_num);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n",
-+ hc->start_pkt_count);
-+ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
-+ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet);
-+ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n",
-+ bytes_transferred);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n",
-+ urb->actual_length);
-+ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n",
-+ urb->length);
-+ }
-+#endif
-+}
-+
-+/**
-+ * Handles a host channel NAK interrupt. This handler may be called in either
-+ * DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "NAK Received--\n", hc->hc_num);
-+
-+ /*
-+ * When we get bulk NAKs then remember this so we holdoff on this qh until
-+ * the beginning of the next frame
-+ */
-+ switch(dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
-+ case UE_BULK:
-+ case UE_CONTROL:
-+ if (nak_holdoff && qtd->qh->do_split)
-+ hc->qh->nak_frame = dwc_otg_hcd_get_frame_number(hcd);
-+ }
-+
-+ /*
-+ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
-+ * interrupt. Re-start the SSPLIT transfer.
-+ */
-+ if (hc->do_split) {
-+ if (hc->complete_split) {
-+ qtd->error_count = 0;
-+ }
-+ qtd->complete_split = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ goto handle_nak_done;
-+ }
-+
-+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
-+ case UE_CONTROL:
-+ case UE_BULK:
-+ if (hcd->core_if->dma_enable && hc->ep_is_in) {
-+ /*
-+ * NAK interrupts are enabled on bulk/control IN
-+ * transfers in DMA mode for the sole purpose of
-+ * resetting the error count after a transaction error
-+ * occurs. The core will continue transferring data.
-+ * Disable other interrupts unmasked for the same
-+ * reason.
-+ */
-+ disable_hc_int(hc_regs, datatglerr);
-+ disable_hc_int(hc_regs, ack);
-+ qtd->error_count = 0;
-+ goto handle_nak_done;
-+ }
-+
-+ /*
-+ * NAK interrupts normally occur during OUT transfers in DMA
-+ * or Slave mode. For IN transfers, more requests will be
-+ * queued as request queue space is available.
-+ */
-+ qtd->error_count = 0;
-+
-+ if (!hc->qh->ping_state) {
-+ update_urb_state_xfer_intr(hc, hc_regs,
-+ qtd->urb, qtd,
-+ DWC_OTG_HC_XFER_NAK);
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH)
-+ hc->qh->ping_state = 1;
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will
-+ * start/continue.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ break;
-+ case UE_INTERRUPT:
-+ qtd->error_count = 0;
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
-+ break;
-+ case UE_ISOCHRONOUS:
-+ /* Should never get called for isochronous transfers. */
-+ DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n");
-+ break;
-+ }
-+
-+handle_nak_done:
-+ disable_hc_int(hc_regs, nak);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel ACK interrupt. This interrupt is enabled when
-+ * performing the PING protocol in Slave mode, when errors occur during
-+ * either Slave mode or DMA mode, and during Start Split transactions.
-+ */
-+static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "ACK Received--\n", hc->hc_num);
-+
-+ if (hc->do_split) {
-+ /*
-+ * Handle ACK on SSPLIT.
-+ * ACK should not occur in CSPLIT.
-+ */
-+ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
-+ qtd->ssplit_out_xfer_count = hc->xfer_len;
-+ }
-+ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
-+ /* Don't need complete for isochronous out transfers. */
-+ qtd->complete_split = 1;
-+ }
-+
-+ /* ISOC OUT */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-+ switch (hc->xact_pos) {
-+ case DWC_HCSPLIT_XACTPOS_ALL:
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_END:
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ qtd->isoc_split_offset = 0;
-+ break;
-+ case DWC_HCSPLIT_XACTPOS_BEGIN:
-+ case DWC_HCSPLIT_XACTPOS_MID:
-+ /*
-+ * For BEGIN or MID, calculate the length for
-+ * the next microframe to determine the correct
-+ * SSPLIT token, either MID or END.
-+ */
-+ {
-+ struct dwc_otg_hcd_iso_packet_desc
-+ *frame_desc;
-+
-+ frame_desc =
-+ &qtd->urb->
-+ iso_descs[qtd->isoc_frame_index];
-+ qtd->isoc_split_offset += 188;
-+
-+ if ((frame_desc->length -
-+ qtd->isoc_split_offset) <= 188) {
-+ qtd->isoc_split_pos =
-+ DWC_HCSPLIT_XACTPOS_END;
-+ } else {
-+ qtd->isoc_split_pos =
-+ DWC_HCSPLIT_XACTPOS_MID;
-+ }
-+
-+ }
-+ break;
-+ }
-+ } else {
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-+ }
-+ } else {
-+ /*
-+ * An unmasked ACK on a non-split DMA transaction is
-+ * for the sole purpose of resetting error counts. Disable other
-+ * interrupts unmasked for the same reason.
-+ */
-+ if(hcd->core_if->dma_enable) {
-+ disable_hc_int(hc_regs, datatglerr);
-+ disable_hc_int(hc_regs, nak);
-+ }
-+ qtd->error_count = 0;
-+
-+ if (hc->qh->ping_state) {
-+ hc->qh->ping_state = 0;
-+ /*
-+ * Halt the channel so the transfer can be re-started
-+ * from the appropriate point. This only happens in
-+ * Slave mode. In DMA mode, the ping_state is cleared
-+ * when the transfer is started because the core
-+ * automatically executes the PING, then the transfer.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
-+ }
-+ }
-+
-+ /*
-+ * If the ACK occurred when _not_ in the PING state, let the channel
-+ * continue transferring data after clearing the error count.
-+ */
-+
-+ disable_hc_int(hc_regs, ack);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel NYET interrupt. This interrupt should only occur on
-+ * Bulk and Control OUT endpoints and for complete split transactions. If a
-+ * NYET occurs at the same time as a Transfer Complete interrupt, it is
-+ * handled in the xfercomp interrupt handler, not here. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "NYET Received--\n", hc->hc_num);
-+
-+ /*
-+ * NYET on CSPLIT
-+ * re-do the CSPLIT immediately on non-periodic
-+ */
-+ if (hc->do_split && hc->complete_split) {
-+ if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
-+ && hcd->core_if->dma_enable) {
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_offset = 0;
-+ if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ }
-+ else
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ goto handle_nyet_done;
-+ }
-+
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ int frnum = dwc_otg_hcd_get_frame_number(hcd);
-+
-+ // With the FIQ running we only ever see the failed NYET
-+ if (dwc_full_frame_num(frnum) !=
-+ dwc_full_frame_num(hc->qh->sched_frame) ||
-+ fiq_fsm_enable) {
-+ /*
-+ * No longer in the same full speed frame.
-+ * Treat this as a transaction error.
-+ */
-+#if 0
-+ /** @todo Fix system performance so this can
-+ * be treated as an error. Right now complete
-+ * splits cannot be scheduled precisely enough
-+ * due to other system activity, so this error
-+ * occurs regularly in Slave mode.
-+ */
-+ qtd->error_count++;
-+#endif
-+ qtd->complete_split = 0;
-+ halt_channel(hcd, hc, qtd,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+ /** @todo add support for isoc release */
-+ goto handle_nyet_done;
-+ }
-+ }
-+
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-+ goto handle_nyet_done;
-+ }
-+
-+ hc->qh->ping_state = 1;
-+ qtd->error_count = 0;
-+
-+ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
-+ DWC_OTG_HC_XFER_NYET);
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+
-+ /*
-+ * Halt the channel and re-start the transfer so the PING
-+ * protocol will start.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
-+
-+handle_nyet_done:
-+ disable_hc_int(hc_regs, nyet);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel babble interrupt. This handler may be called in
-+ * either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "Babble Error--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_desc_enable) {
-+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
-+ DWC_OTG_HC_XFER_BABBLE_ERR);
-+ goto handle_babble_done;
-+ }
-+
-+ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
-+ hcd->fops->complete(hcd, qtd->urb->priv,
-+ qtd->urb, -DWC_E_OVERFLOW);
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
-+ } else {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_BABBLE_ERR);
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+
-+handle_babble_done:
-+ disable_hc_int(hc_regs, bblerr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel AHB error interrupt. This handler is only called in
-+ * DMA mode.
-+ */
-+static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hcsplt_data_t hcsplt;
-+ hctsiz_data_t hctsiz;
-+ uint32_t hcdma;
-+ char *pipetype, *speed;
-+
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "AHB Error--\n", hc->hc_num);
-+
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+ hcdma = DWC_READ_REG32(&hc_regs->hcdma);
-+
-+ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
-+ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
-+ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
-+ DWC_ERROR(" Device address: %d\n",
-+ dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
-+ DWC_ERROR(" Endpoint: %d, %s\n",
-+ dwc_otg_hcd_get_ep_num(&urb->pipe_info),
-+ (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"));
-+
-+ switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
-+ case UE_CONTROL:
-+ pipetype = "CONTROL";
-+ break;
-+ case UE_BULK:
-+ pipetype = "BULK";
-+ break;
-+ case UE_INTERRUPT:
-+ pipetype = "INTERRUPT";
-+ break;
-+ case UE_ISOCHRONOUS:
-+ pipetype = "ISOCHRONOUS";
-+ break;
-+ default:
-+ pipetype = "UNKNOWN";
-+ break;
-+ }
-+
-+ DWC_ERROR(" Endpoint type: %s\n", pipetype);
-+
-+ switch (hc->speed) {
-+ case DWC_OTG_EP_SPEED_HIGH:
-+ speed = "HIGH";
-+ break;
-+ case DWC_OTG_EP_SPEED_FULL:
-+ speed = "FULL";
-+ break;
-+ case DWC_OTG_EP_SPEED_LOW:
-+ speed = "LOW";
-+ break;
-+ default:
-+ speed = "UNKNOWN";
-+ break;
-+ };
-+
-+ DWC_ERROR(" Speed: %s\n", speed);
-+
-+ DWC_ERROR(" Max packet size: %d\n",
-+ dwc_otg_hcd_get_mps(&urb->pipe_info));
-+ DWC_ERROR(" Data buffer length: %d\n", urb->length);
-+ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->buf, (void *)urb->dma);
-+ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ DWC_ERROR(" Interval: %d\n", urb->interval);
-+
-+ /* Core haltes the channel for Descriptor DMA mode */
-+ if (hcd->core_if->dma_desc_enable) {
-+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
-+ DWC_OTG_HC_XFER_AHB_ERR);
-+ goto handle_ahberr_done;
-+ }
-+
-+ hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO);
-+
-+ /*
-+ * Force a channel halt. Don't call halt_channel because that won't
-+ * write to the HCCHARn register in DMA mode to force the halt.
-+ */
-+ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
-+handle_ahberr_done:
-+ disable_hc_int(hc_regs, ahberr);
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel transaction error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "Transaction Error--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_desc_enable) {
-+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+ goto handle_xacterr_done;
-+ }
-+
-+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
-+ case UE_CONTROL:
-+ case UE_BULK:
-+ qtd->error_count++;
-+ if (!hc->qh->ping_state) {
-+
-+ update_urb_state_xfer_intr(hc, hc_regs,
-+ qtd->urb, qtd,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) {
-+ hc->qh->ping_state = 1;
-+ }
-+ }
-+
-+ /*
-+ * Halt the channel so the transfer can be re-started from
-+ * the appropriate point or the PING protocol will start.
-+ */
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ break;
-+ case UE_INTERRUPT:
-+ qtd->error_count++;
-+ if (hc->do_split && hc->complete_split) {
-+ qtd->complete_split = 0;
-+ }
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ break;
-+ case UE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status =
-+ update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_XACT_ERR);
-+
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ break;
-+ }
-+handle_xacterr_done:
-+ disable_hc_int(hc_regs, xacterr);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel frame overrun interrupt. This handler may be called
-+ * in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "Frame Overrun--\n", hc->hc_num);
-+
-+ switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
-+ case UE_CONTROL:
-+ case UE_BULK:
-+ break;
-+ case UE_INTERRUPT:
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+ break;
-+ case UE_ISOCHRONOUS:
-+ {
-+ dwc_otg_halt_status_e halt_status;
-+ halt_status =
-+ update_isoc_urb_state(hcd, hc, hc_regs, qtd,
-+ DWC_OTG_HC_XFER_FRAME_OVERRUN);
-+
-+ halt_channel(hcd, hc, qtd, halt_status);
-+ }
-+ break;
-+ }
-+
-+ disable_hc_int(hc_regs, frmovrun);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handles a host channel data toggle error interrupt. This handler may be
-+ * called in either DMA mode or Slave mode.
-+ */
-+static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "Data Toggle Error on %s transfer--\n",
-+ hc->hc_num, (hc->ep_is_in ? "IN" : "OUT"));
-+
-+ /* Data toggles on split transactions cause the hc to halt.
-+ * restart transfer */
-+ if(hc->qh->do_split)
-+ {
-+ qtd->error_count++;
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ update_urb_state_xfer_intr(hc, hc_regs,
-+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ } else if (hc->ep_is_in) {
-+ /* An unmasked data toggle error on a non-split DMA transaction is
-+ * for the sole purpose of resetting error counts. Disable other
-+ * interrupts unmasked for the same reason.
-+ */
-+ if(hcd->core_if->dma_enable) {
-+ disable_hc_int(hc_regs, ack);
-+ disable_hc_int(hc_regs, nak);
-+ }
-+ qtd->error_count = 0;
-+ }
-+
-+ disable_hc_int(hc_regs, datatglerr);
-+
-+ return 1;
-+}
-+
-+#ifdef DEBUG
-+/**
-+ * This function is for debug only. It checks that a valid halt status is set
-+ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
-+ * taken and a warning is issued.
-+ * @return 1 if halt status is ok, 0 otherwise.
-+ */
-+static inline int halt_status_ok(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ hcchar_data_t hcchar;
-+ hctsiz_data_t hctsiz;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ hcsplt_data_t hcsplt;
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
-+ /*
-+ * This code is here only as a check. This condition should
-+ * never happen. Ignore the halt if it does occur.
-+ */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
-+ hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
-+ DWC_WARN
-+ ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
-+ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
-+ "hcint 0x%08x, hcintmsk 0x%08x, "
-+ "hcsplt 0x%08x, qtd->complete_split %d\n", __func__,
-+ hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32,
-+ hcintmsk.d32, hcsplt.d32, qtd->complete_split);
-+
-+ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
-+ __func__, hc->hc_num);
-+ DWC_WARN("\n");
-+ clear_hc_int(hc_regs, chhltd);
-+ return 0;
-+ }
-+
-+ /*
-+ * This code is here only as a check. hcchar.chdis should
-+ * never be set when the halt interrupt occurs. Halt the
-+ * channel again if it does occur.
-+ */
-+ hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
-+ if (hcchar.b.chdis) {
-+ DWC_WARN("%s: hcchar.chdis set unexpectedly, "
-+ "hcchar 0x%08x, trying to halt again\n",
-+ __func__, hcchar.d32);
-+ clear_hc_int(hc_regs, chhltd);
-+ hc->halt_pending = 0;
-+ halt_channel(hcd, hc, qtd, hc->halt_status);
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+#endif
-+
-+/**
-+ * Handles a host Channel Halted interrupt in DMA mode. This handler
-+ * determines the reason the channel halted and proceeds accordingly.
-+ */
-+static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ int out_nak_enh = 0;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ /* For core with OUT NAK enhancement, the flow for high-
-+ * speed CONTROL/BULK OUT is handled a little differently.
-+ */
-+ if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) {
-+ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
-+ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
-+ out_nak_enh = 1;
-+ }
-+ }
-+
-+ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
-+ (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR
-+ && !hcd->core_if->dma_desc_enable)) {
-+ /*
-+ * Just release the channel. A dequeue can happen on a
-+ * transfer timeout. In the case of an AHB Error, the channel
-+ * was forced to halt because there's no way to gracefully
-+ * recover.
-+ */
-+ if (hcd->core_if->dma_desc_enable)
-+ dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
-+ hc->halt_status);
-+ else
-+ release_channel(hcd, hc, qtd, hc->halt_status);
-+ return;
-+ }
-+
-+ /* Read the HCINTn register to determine the cause for the halt. */
-+
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
-+
-+ if (hcint.b.xfercomp) {
-+ /** @todo This is here because of a possible hardware bug. Spec
-+ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
-+ * interrupt w/ACK bit set should occur, but I only see the
-+ * XFERCOMP bit, even with it masked out. This is a workaround
-+ * for that behavior. Should fix this when hardware is fixed.
-+ */
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
-+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-+ }
-+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.stall) {
-+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) {
-+ if (out_nak_enh) {
-+ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
-+ DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n");
-+ qtd->error_count = 0;
-+ } else {
-+ DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n");
-+ }
-+ }
-+
-+ /*
-+ * Must handle xacterr before nak or ack. Could get a xacterr
-+ * at the same time as either of these on a BULK/CONTROL OUT
-+ * that started with a PING. The xacterr takes precedence.
-+ */
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) {
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) {
-+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.bblerr) {
-+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.frmovrun) {
-+ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.datatglerr) {
-+ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (!out_nak_enh) {
-+ if (hcint.b.nyet) {
-+ /*
-+ * Must handle nyet before nak or ack. Could get a nyet at the
-+ * same time as either of those on a BULK/CONTROL OUT that
-+ * started with a PING. The nyet takes precedence.
-+ */
-+ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.nak && !hcintmsk.b.nak) {
-+ /*
-+ * If nak is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the nak is handled by
-+ * the nak interrupt handler, not here. Handle nak here for
-+ * BULK/CONTROL OUT transfers, which halt on a NAK to allow
-+ * rewinding the buffer pointer.
-+ */
-+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.ack && !hcintmsk.b.ack) {
-+ /*
-+ * If ack is not masked, it's because a non-split IN transfer
-+ * is in an error state. In that case, the ack is handled by
-+ * the ack interrupt handler, not here. Handle ack here for
-+ * split transfers. Start splits halt on ACK.
-+ */
-+ handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
-+ } else {
-+ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
-+ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * A periodic transfer halted with no other channel
-+ * interrupts set. Assume it was halted by the core
-+ * because it could not be completed in its scheduled
-+ * (micro)frame.
-+ */
-+#ifdef DEBUG
-+ DWC_PRINTF
-+ ("%s: Halt channel %d (assume incomplete periodic transfer)\n",
-+ __func__, hc->hc_num);
-+#endif
-+ halt_channel(hcd, hc, qtd,
-+ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
-+ } else {
-+ DWC_ERROR
-+ ("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
-+ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
-+ __func__, hc->hc_num, hcint.d32,
-+ DWC_READ_REG32(&hcd->
-+ core_if->core_global_regs->
-+ gintsts));
-+ /* Failthrough: use 3-strikes rule */
-+ qtd->error_count++;
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ update_urb_state_xfer_intr(hc, hc_regs,
-+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ }
-+
-+ }
-+ } else {
-+ DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n",
-+ hcint.d32);
-+ /* Failthrough: use 3-strikes rule */
-+ qtd->error_count++;
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ update_urb_state_xfer_intr(hc, hc_regs,
-+ qtd->urb, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
-+ }
-+}
-+
-+/**
-+ * Handles a host channel Channel Halted interrupt.
-+ *
-+ * In slave mode, this handler is called only when the driver specifically
-+ * requests a halt. This occurs during handling other host channel interrupts
-+ * (e.g. nak, xacterr, stall, nyet, etc.).
-+ *
-+ * In DMA mode, this is the interrupt that occurs when the core has finished
-+ * processing a transfer on a channel. Other host channel interrupts (except
-+ * ahberr) are disabled in DMA mode.
-+ */
-+static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd,
-+ dwc_hc_t * hc,
-+ dwc_otg_hc_regs_t * hc_regs,
-+ dwc_otg_qtd_t * qtd)
-+{
-+ DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
-+ "Channel Halted--\n", hc->hc_num);
-+
-+ if (hcd->core_if->dma_enable) {
-+ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
-+ } else {
-+#ifdef DEBUG
-+ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
-+ return 1;
-+ }
-+#endif
-+ release_channel(hcd, hc, qtd, hc->halt_status);
-+ }
-+
-+ return 1;
-+}
-+
-+
-+/**
-+ * dwc_otg_fiq_unmangle_isoc() - Update the iso_frame_desc structure on
-+ * FIQ transfer completion
-+ * @hcd: Pointer to dwc_otg_hcd struct
-+ * @num: Host channel number
-+ *
-+ * 1. Un-mangle the status as recorded in each iso_frame_desc status
-+ * 2. Copy it from the dwc_otg_urb into the real URB
-+ */
-+void dwc_otg_fiq_unmangle_isoc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num)
-+{
-+ struct dwc_otg_hcd_urb *dwc_urb = qtd->urb;
-+ int nr_frames = dwc_urb->packet_count;
-+ int i;
-+ hcint_data_t frame_hcint;
-+
-+ for (i = 0; i < nr_frames; i++) {
-+ frame_hcint.d32 = dwc_urb->iso_descs[i].status;
-+ if (frame_hcint.b.xfercomp) {
-+ dwc_urb->iso_descs[i].status = 0;
-+ dwc_urb->actual_length += dwc_urb->iso_descs[i].actual_length;
-+ } else if (frame_hcint.b.frmovrun) {
-+ if (qh->ep_is_in)
-+ dwc_urb->iso_descs[i].status = -DWC_E_NO_STREAM_RES;
-+ else
-+ dwc_urb->iso_descs[i].status = -DWC_E_COMMUNICATION;
-+ dwc_urb->error_count++;
-+ dwc_urb->iso_descs[i].actual_length = 0;
-+ } else if (frame_hcint.b.xacterr) {
-+ dwc_urb->iso_descs[i].status = -DWC_E_PROTOCOL;
-+ dwc_urb->error_count++;
-+ dwc_urb->iso_descs[i].actual_length = 0;
-+ } else if (frame_hcint.b.bblerr) {
-+ dwc_urb->iso_descs[i].status = -DWC_E_OVERFLOW;
-+ dwc_urb->error_count++;
-+ dwc_urb->iso_descs[i].actual_length = 0;
-+ } else {
-+ /* Something went wrong */
-+ dwc_urb->iso_descs[i].status = -1;
-+ dwc_urb->iso_descs[i].actual_length = 0;
-+ dwc_urb->error_count++;
-+ }
-+ }
-+ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval * (nr_frames - 1));
-+
-+ //printk_ratelimited(KERN_INFO "%s: HS isochronous of %d/%d frames with %d errors complete\n",
-+ // __FUNCTION__, i, dwc_urb->packet_count, dwc_urb->error_count);
-+}
-+
-+/**
-+ * dwc_otg_fiq_unsetup_per_dma() - Remove data from bounce buffers for split transactions
-+ * @hcd: Pointer to dwc_otg_hcd struct
-+ * @num: Host channel number
-+ *
-+ * Copies data from the FIQ bounce buffers into the URB's transfer buffer. Does not modify URB state.
-+ * Returns total length of data or -1 if the buffers were not used.
-+ *
-+ */
-+int dwc_otg_fiq_unsetup_per_dma(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, dwc_otg_qtd_t *qtd, uint32_t num)
-+{
-+ dwc_hc_t *hc = qh->channel;
-+ struct fiq_dma_blob *blob = hcd->fiq_dmab;
-+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num];
-+ uint8_t *ptr = NULL;
-+ int index = 0, len = 0;
-+ int i = 0;
-+ if (hc->ep_is_in) {
-+ /* Copy data out of the DMA bounce buffers to the URB's buffer.
-+ * The align_buf is ignored as this is ignored on FSM enqueue. */
-+ ptr = qtd->urb->buf;
-+ if (qh->ep_type == UE_ISOCHRONOUS) {
-+ /* Isoc IN transactions - grab the offset of the iso_frame_desc into the URB transfer buffer */
-+ index = qtd->isoc_frame_index;
-+ ptr += qtd->urb->iso_descs[index].offset;
-+ } else {
-+ /* Need to increment by actual_length for interrupt IN */
-+ ptr += qtd->urb->actual_length;
-+ }
-+
-+ for (i = 0; i < st->dma_info.index; i++) {
-+ len += st->dma_info.slot_len[i];
-+ dwc_memcpy(ptr, &blob->channel[num].index[i].buf[0], st->dma_info.slot_len[i]);
-+ ptr += st->dma_info.slot_len[i];
-+ }
-+ return len;
-+ } else {
-+ /* OUT endpoints - nothing to do. */
-+ return -1;
-+ }
-+
-+}
-+/**
-+ * dwc_otg_hcd_handle_hc_fsm() - handle an unmasked channel interrupt
-+ * from a channel handled in the FIQ
-+ * @hcd: Pointer to dwc_otg_hcd struct
-+ * @num: Host channel number
-+ *
-+ * If a host channel interrupt was received by the IRQ and this was a channel
-+ * used by the FIQ, the execution flow for transfer completion is substantially
-+ * different from the normal (messy) path. This function and its friends handles
-+ * channel cleanup and transaction completion from a FIQ transaction.
-+ */
-+void dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd_t *hcd, uint32_t num)
-+{
-+ struct fiq_channel_state *st = &hcd->fiq_state->channel[num];
-+ dwc_hc_t *hc = hcd->hc_ptr_array[num];
-+ dwc_otg_qtd_t *qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
-+ dwc_otg_qh_t *qh = hc->qh;
-+ dwc_otg_hc_regs_t *hc_regs = hcd->core_if->host_if->hc_regs[num];
-+ hcint_data_t hcint = hcd->fiq_state->channel[num].hcint_copy;
-+ int hostchannels = 0;
-+ fiq_print(FIQDBG_INT, hcd->fiq_state, "OUT %01d %01d ", num , st->fsm);
-+
-+ hostchannels = hcd->available_host_channels;
-+ switch (st->fsm) {
-+ case FIQ_TEST:
-+ break;
-+
-+ case FIQ_DEQUEUE_ISSUED:
-+ /* hc_halt was called. QTD no longer exists. */
-+ /* TODO: for a nonperiodic split transaction, need to issue a
-+ * CLEAR_TT_BUFFER hub command if we were in the start-split phase.
-+ */
-+ release_channel(hcd, hc, NULL, hc->halt_status);
-+ break;
-+
-+ case FIQ_NP_SPLIT_DONE:
-+ /* Nonperiodic transaction complete. */
-+ if (!hc->ep_is_in) {
-+ qtd->ssplit_out_xfer_count = hc->xfer_len;
-+ }
-+ if (hcint.b.xfercomp) {
-+ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.nak) {
-+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
-+ }
-+ break;
-+
-+ case FIQ_NP_SPLIT_HS_ABORTED:
-+ /* A HS abort is a 3-strikes on the HS bus at any point in the transaction.
-+ * Normally a CLEAR_TT_BUFFER hub command would be required: we can't do that
-+ * because there's no guarantee which order a non-periodic split happened in.
-+ * We could end up clearing a perfectly good transaction out of the buffer.
-+ */
-+ if (hcint.b.xacterr) {
-+ qtd->error_count += st->nr_errors;
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.ahberr) {
-+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
-+ } else {
-+ local_fiq_disable();
-+ BUG();
-+ }
-+ break;
-+
-+ case FIQ_NP_SPLIT_LS_ABORTED:
-+ /* A few cases can cause this - either an unknown state on a SSPLIT or
-+ * STALL/data toggle error response on a CSPLIT */
-+ if (hcint.b.stall) {
-+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.datatglerr) {
-+ handle_hc_datatglerr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.bblerr) {
-+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.ahberr) {
-+ handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
-+ } else {
-+ local_fiq_disable();
-+ BUG();
-+ }
-+ break;
-+
-+ case FIQ_PER_SPLIT_DONE:
-+ /* Isoc IN or Interrupt IN/OUT */
-+
-+ /* Flow control here is different from the normal execution by the driver.
-+ * We need to completely ignore most of the driver's method of handling
-+ * split transactions and do it ourselves.
-+ */
-+ if (hc->ep_type == UE_INTERRUPT) {
-+ if (hcint.b.nak) {
-+ handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hc->ep_is_in) {
-+ int len;
-+ len = dwc_otg_fiq_unsetup_per_dma(hcd, hc->qh, qtd, num);
-+ //printk(KERN_NOTICE "FIQ Transaction: hc=%d len=%d urb_len = %d\n", num, len, qtd->urb->length);
-+ qtd->urb->actual_length += len;
-+ if (qtd->urb->actual_length >= qtd->urb->length) {
-+ qtd->urb->status = 0;
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ /* Interrupt transfer not complete yet - is it a short read? */
-+ if (len < hc->max_packet) {
-+ /* Interrupt transaction complete */
-+ qtd->urb->status = 0;
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ /* Further transactions required */
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ }
-+ } else {
-+ /* Interrupt OUT complete. */
-+ dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
-+ qtd->urb->actual_length += hc->xfer_len;
-+ if (qtd->urb->actual_length >= qtd->urb->length) {
-+ qtd->urb->status = 0;
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, qtd->urb->status);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ }
-+ } else {
-+ /* ISOC IN complete. */
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+ int len = 0;
-+ /* Record errors, update qtd. */
-+ if (st->nr_errors) {
-+ frame_desc->actual_length = 0;
-+ frame_desc->status = -DWC_E_PROTOCOL;
-+ } else {
-+ frame_desc->status = 0;
-+ /* Unswizzle dma */
-+ len = dwc_otg_fiq_unsetup_per_dma(hcd, qh, qtd, num);
-+ frame_desc->actual_length = len;
-+ }
-+ qtd->isoc_frame_index++;
-+ if (qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ }
-+ break;
-+
-+ case FIQ_PER_ISO_OUT_DONE: {
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+ /* Record errors, update qtd. */
-+ if (st->nr_errors) {
-+ frame_desc->actual_length = 0;
-+ frame_desc->status = -DWC_E_PROTOCOL;
-+ } else {
-+ frame_desc->status = 0;
-+ frame_desc->actual_length = frame_desc->length;
-+ }
-+ qtd->isoc_frame_index++;
-+ qtd->isoc_split_offset = 0;
-+ if (qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ }
-+ break;
-+
-+ case FIQ_PER_SPLIT_NYET_ABORTED:
-+ /* Doh. lost the data. */
-+ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed "
-+ "- FIQ reported NYET. Data may have been lost.\n",
-+ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3);
-+ if (hc->ep_type == UE_ISOCHRONOUS) {
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+ /* Record errors, update qtd. */
-+ frame_desc->actual_length = 0;
-+ frame_desc->status = -DWC_E_PROTOCOL;
-+ qtd->isoc_frame_index++;
-+ qtd->isoc_split_offset = 0;
-+ if (qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ }
-+ break;
-+
-+ case FIQ_HS_ISOC_DONE:
-+ /* The FIQ has performed a whole pile of isochronous transactions.
-+ * The status is recorded as the interrupt state should the transaction
-+ * fail.
-+ */
-+ dwc_otg_fiq_unmangle_isoc(hcd, qh, qtd, num);
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ break;
-+
-+ case FIQ_PER_SPLIT_LS_ABORTED:
-+ if (hcint.b.xacterr) {
-+ /* Hub has responded with an ERR packet. Device
-+ * has been unplugged or the port has been disabled.
-+ * TODO: need to issue a reset to the hub port. */
-+ qtd->error_count += 3;
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.stall) {
-+ handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
-+ } else if (hcint.b.bblerr) {
-+ handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
-+ } else {
-+ printk_ratelimited(KERN_INFO "Transfer to device %d endpoint 0x%x failed "
-+ "- FIQ reported FSM=%d. Data may have been lost.\n",
-+ st->fsm, hc->dev_addr, hc->ep_num);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ }
-+ break;
-+
-+ case FIQ_PER_SPLIT_HS_ABORTED:
-+ /* Either the SSPLIT phase suffered transaction errors or something
-+ * unexpected happened.
-+ */
-+ qtd->error_count += 3;
-+ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ break;
-+
-+ case FIQ_PER_SPLIT_TIMEOUT:
-+ /* Couldn't complete in the nominated frame */
-+ printk(KERN_INFO "Transfer to device %d endpoint 0x%x frame %d failed "
-+ "- FIQ timed out. Data may have been lost.\n",
-+ hc->dev_addr, hc->ep_num, dwc_otg_hcd_get_frame_number(hcd) >> 3);
-+ if (hc->ep_type == UE_ISOCHRONOUS) {
-+ struct dwc_otg_hcd_iso_packet_desc *frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
-+ /* Record errors, update qtd. */
-+ frame_desc->actual_length = 0;
-+ if (hc->ep_is_in) {
-+ frame_desc->status = -DWC_E_NO_STREAM_RES;
-+ } else {
-+ frame_desc->status = -DWC_E_COMMUNICATION;
-+ }
-+ qtd->isoc_frame_index++;
-+ if (qtd->isoc_frame_index == qtd->urb->packet_count) {
-+ hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_COMPLETE);
-+ }
-+ } else {
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ }
-+ break;
-+
-+ default:
-+ DWC_WARN("Unexpected state received on hc=%d fsm=%d on transfer to device %d ep 0x%x",
-+ hc->hc_num, st->fsm, hc->dev_addr, hc->ep_num);
-+ qtd->error_count++;
-+ release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
-+ }
-+ return;
-+}
-+
-+/** Handles interrupt for a specific Host Channel */
-+int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
-+{
-+ int retval = 0;
-+ hcint_data_t hcint;
-+ hcintmsk_data_t hcintmsk;
-+ dwc_hc_t *hc;
-+ dwc_otg_hc_regs_t *hc_regs;
-+ dwc_otg_qtd_t *qtd;
-+
-+ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
-+
-+ hc = dwc_otg_hcd->hc_ptr_array[num];
-+ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
-+ if(hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
-+ /* We are responding to a channel disable. Driver
-+ * state is cleared - our qtd has gone away.
-+ */
-+ release_channel(dwc_otg_hcd, hc, NULL, hc->halt_status);
-+ return 1;
-+ }
-+ qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
-+
-+ /*
-+ * FSM mode: Check to see if this is a HC interrupt from a channel handled by the FIQ.
-+ * Execution path is fundamentally different for the channels after a FIQ has completed
-+ * a split transaction.
-+ */
-+ if (fiq_fsm_enable) {
-+ switch (dwc_otg_hcd->fiq_state->channel[num].fsm) {
-+ case FIQ_PASSTHROUGH:
-+ break;
-+ case FIQ_PASSTHROUGH_ERRORSTATE:
-+ /* Hook into the error count */
-+ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "HCDERR%02d", num);
-+ if (!dwc_otg_hcd->fiq_state->channel[num].nr_errors) {
-+ qtd->error_count = 0;
-+ fiq_print(FIQDBG_ERR, dwc_otg_hcd->fiq_state, "RESET ");
-+ }
-+ break;
-+ default:
-+ dwc_otg_hcd_handle_hc_fsm(dwc_otg_hcd, num);
-+ return 1;
-+ }
-+ }
-+
-+ hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
-+ hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
-+ hcint.d32 = hcint.d32 & hcintmsk.d32;
-+ if (!dwc_otg_hcd->core_if->dma_enable) {
-+ if (hcint.b.chhltd && hcint.d32 != 0x2) {
-+ hcint.b.chhltd = 0;
-+ }
-+ }
-+
-+ if (hcint.b.xfercomp) {
-+ retval |=
-+ handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ /*
-+ * If NYET occurred at same time as Xfer Complete, the NYET is
-+ * handled by the Xfer Complete interrupt handler. Don't want
-+ * to call the NYET interrupt handler in this case.
-+ */
-+ hcint.b.nyet = 0;
-+ }
-+ if (hcint.b.chhltd) {
-+ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.ahberr) {
-+ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.stall) {
-+ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.nak) {
-+ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.ack) {
-+ if(!hcint.b.chhltd)
-+ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.nyet) {
-+ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.xacterr) {
-+ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.bblerr) {
-+ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.frmovrun) {
-+ retval |=
-+ handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+ if (hcint.b.datatglerr) {
-+ retval |=
-+ handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
-+ }
-+
-+ return retval;
-+}
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
-@@ -0,0 +1,1005 @@
-+
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $
-+ * $Revision: #20 $
-+ * $Date: 2011/10/26 $
-+ * $Change: 1872981 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the implementation of the HCD. In Linux, the HCD
-+ * implements the hc_driver API.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/version.h>
-+#include <asm/io.h>
-+#include <asm/fiq.h>
-+#include <linux/usb.h>
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
-+#include <../drivers/usb/core/hcd.h>
-+#else
-+#include <linux/usb/hcd.h>
-+#endif
-+#include <asm/bug.h>
-+
-+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
-+#define USB_URB_EP_LINKING 1
-+#else
-+#define USB_URB_EP_LINKING 0
-+#endif
-+
-+#include "dwc_otg_hcd_if.h"
-+#include "dwc_otg_dbg.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_hcd.h"
-+
-+extern unsigned char _dwc_otg_fiq_stub, _dwc_otg_fiq_stub_end;
-+
-+/**
-+ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
-+ * qualified with its direction (possible 32 endpoints per device).
-+ */
-+#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
-+ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
-+
-+static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
-+
-+extern bool fiq_enable;
-+
-+/** @name Linux HC Driver API Functions */
-+/** @{ */
-+/* manage i/o requests, device state */
-+static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ struct usb_host_endpoint *ep,
-+#endif
-+ struct urb *urb, gfp_t mem_flags);
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
-+#endif
-+#else /* kernels at or post 2.6.30 */
-+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd,
-+ struct urb *urb, int status);
-+#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */
-+
-+static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
-+static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
-+#endif
-+static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
-+extern int hcd_start(struct usb_hcd *hcd);
-+extern void hcd_stop(struct usb_hcd *hcd);
-+static int get_frame_number(struct usb_hcd *hcd);
-+extern int hub_status_data(struct usb_hcd *hcd, char *buf);
-+extern int hub_control(struct usb_hcd *hcd,
-+ u16 typeReq,
-+ u16 wValue, u16 wIndex, char *buf, u16 wLength);
-+
-+struct wrapper_priv_data {
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+};
-+
-+/** @} */
-+
-+static struct hc_driver dwc_otg_hc_driver = {
-+
-+ .description = dwc_otg_hcd_name,
-+ .product_desc = "DWC OTG Controller",
-+ .hcd_priv_size = sizeof(struct wrapper_priv_data),
-+
-+ .irq = dwc_otg_hcd_irq,
-+
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ //.reset =
-+ .start = hcd_start,
-+ //.suspend =
-+ //.resume =
-+ .stop = hcd_stop,
-+
-+ .urb_enqueue = dwc_otg_urb_enqueue,
-+ .urb_dequeue = dwc_otg_urb_dequeue,
-+ .endpoint_disable = endpoint_disable,
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
-+ .endpoint_reset = endpoint_reset,
-+#endif
-+ .get_frame_number = get_frame_number,
-+
-+ .hub_status_data = hub_status_data,
-+ .hub_control = hub_control,
-+ //.bus_suspend =
-+ //.bus_resume =
-+};
-+
-+/** Gets the dwc_otg_hcd from a struct usb_hcd */
-+static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
-+{
-+ struct wrapper_priv_data *p;
-+ p = (struct wrapper_priv_data *)(hcd->hcd_priv);
-+ return p->dwc_otg_hcd;
-+}
-+
-+/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
-+static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd)
-+{
-+ return dwc_otg_hcd_get_priv_data(dwc_otg_hcd);
-+}
-+
-+/** Gets the usb_host_endpoint associated with an URB. */
-+inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
-+{
-+ struct usb_device *dev = urb->dev;
-+ int ep_num = usb_pipeendpoint(urb->pipe);
-+
-+ if (usb_pipein(urb->pipe))
-+ return dev->ep_in[ep_num];
-+ else
-+ return dev->ep_out[ep_num];
-+}
-+
-+static int _disconnect(dwc_otg_hcd_t * hcd)
-+{
-+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
-+
-+ usb_hcd->self.is_b_host = 0;
-+ return 0;
-+}
-+
-+static int _start(dwc_otg_hcd_t * hcd)
-+{
-+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
-+
-+ usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd);
-+ hcd_start(usb_hcd);
-+
-+ return 0;
-+}
-+
-+static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr,
-+ uint32_t * port_addr)
-+{
-+ struct urb *urb = (struct urb *)urb_handle;
-+ struct usb_bus *bus;
-+#if 1 //GRAYG - temporary
-+ if (NULL == urb_handle)
-+ DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG
-+ if (NULL == urb->dev)
-+ DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG
-+ if (NULL == port_addr)
-+ DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG
-+#endif
-+ if (urb->dev->tt) {
-+ if (NULL == urb->dev->tt->hub) {
-+ DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n",
-+ __func__); //GRAYG
-+ //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG
-+ *hub_addr = 0; //GRAYG
-+ // we probably shouldn't have a transaction translator if
-+ // there's no associated hub?
-+ } else {
-+ bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd));
-+ if (urb->dev->tt->hub == bus->root_hub)
-+ *hub_addr = 0;
-+ else
-+ *hub_addr = urb->dev->tt->hub->devnum;
-+ }
-+ *port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1;
-+ } else {
-+ *hub_addr = 0;
-+ *port_addr = urb->dev->ttport;
-+ }
-+ return 0;
-+}
-+
-+static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle)
-+{
-+ struct urb *urb = (struct urb *)urb_handle;
-+ return urb->dev->speed;
-+}
-+
-+static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd)
-+{
-+ struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
-+ return usb_hcd->self.b_hnp_enable;
-+}
-+
-+static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
-+ struct urb *urb)
-+{
-+ hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval;
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ hcd_to_bus(hcd)->bandwidth_isoc_reqs++;
-+ } else {
-+ hcd_to_bus(hcd)->bandwidth_int_reqs++;
-+ }
-+}
-+
-+static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
-+ struct urb *urb)
-+{
-+ hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval;
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ hcd_to_bus(hcd)->bandwidth_isoc_reqs--;
-+ } else {
-+ hcd_to_bus(hcd)->bandwidth_int_reqs--;
-+ }
-+}
-+
-+/**
-+ * Sets the final status of an URB and returns it to the device driver. Any
-+ * required cleanup of the URB is performed. The HCD lock should be held on
-+ * entry.
-+ */
-+static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle,
-+ dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status)
-+{
-+ struct urb *urb = (struct urb *)urb_handle;
-+ urb_tq_entry_t *new_entry;
-+ int rc = 0;
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n",
-+ __func__, urb, usb_pipedevice(urb->pipe),
-+ usb_pipeendpoint(urb->pipe),
-+ usb_pipein(urb->pipe) ? "IN" : "OUT", status);
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ DWC_PRINTF(" ISO Desc %d status: %d\n",
-+ i, urb->iso_frame_desc[i].status);
-+ }
-+ }
-+ }
-+ new_entry = DWC_ALLOC_ATOMIC(sizeof(urb_tq_entry_t));
-+ urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb);
-+ /* Convert status value. */
-+ switch (status) {
-+ case -DWC_E_PROTOCOL:
-+ status = -EPROTO;
-+ break;
-+ case -DWC_E_IN_PROGRESS:
-+ status = -EINPROGRESS;
-+ break;
-+ case -DWC_E_PIPE:
-+ status = -EPIPE;
-+ break;
-+ case -DWC_E_IO:
-+ status = -EIO;
-+ break;
-+ case -DWC_E_TIMEOUT:
-+ status = -ETIMEDOUT;
-+ break;
-+ case -DWC_E_OVERFLOW:
-+ status = -EOVERFLOW;
-+ break;
-+ case -DWC_E_SHUTDOWN:
-+ status = -ESHUTDOWN;
-+ break;
-+ default:
-+ if (status) {
-+ DWC_PRINTF("Uknown urb status %d\n", status);
-+
-+ }
-+ }
-+
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+
-+ urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb);
-+ for (i = 0; i < urb->number_of_packets; ++i) {
-+ urb->iso_frame_desc[i].actual_length =
-+ dwc_otg_hcd_urb_get_iso_desc_actual_length
-+ (dwc_otg_urb, i);
-+ urb->iso_frame_desc[i].status =
-+ dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i);
-+ }
-+ }
-+
-+ urb->status = status;
-+ urb->hcpriv = NULL;
-+ if (!status) {
-+ if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
-+ (urb->actual_length < urb->transfer_buffer_length)) {
-+ urb->status = -EREMOTEIO;
-+ }
-+ }
-+
-+ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ||
-+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
-+ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
-+ if (ep) {
-+ free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd),
-+ dwc_otg_hcd_get_ep_bandwidth(hcd,
-+ ep->hcpriv),
-+ urb);
-+ }
-+ }
-+ DWC_FREE(dwc_otg_urb);
-+ if (!new_entry) {
-+ DWC_ERROR("dwc_otg_hcd: complete: cannot allocate URB TQ entry\n");
-+ urb->status = -EPROTO;
-+ /* don't schedule the tasklet -
-+ * directly return the packet here with error. */
-+#if USB_URB_EP_LINKING
-+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
-+#endif
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb);
-+#else
-+ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status);
-+#endif
-+ } else {
-+ new_entry->urb = urb;
-+#if USB_URB_EP_LINKING
-+ rc = usb_hcd_check_unlink_urb(dwc_otg_hcd_to_hcd(hcd), urb, urb->status);
-+ if(0 == rc) {
-+ usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
-+ }
-+#endif
-+ if(0 == rc) {
-+ DWC_TAILQ_INSERT_TAIL(&hcd->completed_urb_list, new_entry,
-+ urb_tq_entries);
-+ DWC_TASK_HI_SCHEDULE(hcd->completion_tasklet);
-+ }
-+ }
-+ return 0;
-+}
-+
-+static struct dwc_otg_hcd_function_ops hcd_fops = {
-+ .start = _start,
-+ .disconnect = _disconnect,
-+ .hub_info = _hub_info,
-+ .speed = _speed,
-+ .complete = _complete,
-+ .get_b_hnp_enable = _get_b_hnp_enable,
-+};
-+
-+static struct fiq_handler fh = {
-+ .name = "usb_fiq",
-+};
-+
-+static void hcd_init_fiq(void *cookie)
-+{
-+ dwc_otg_device_t *otg_dev = cookie;
-+ dwc_otg_hcd_t *dwc_otg_hcd = otg_dev->hcd;
-+ struct pt_regs regs;
-+ int irq;
-+
-+ if (claim_fiq(&fh)) {
-+ DWC_ERROR("Can't claim FIQ");
-+ BUG();
-+ }
-+ DWC_WARN("FIQ on core %d at 0x%08x",
-+ smp_processor_id(),
-+ (fiq_fsm_enable ? (int)&dwc_otg_fiq_fsm : (int)&dwc_otg_fiq_nop));
-+ DWC_WARN("FIQ ASM at 0x%08x length %d", (int)&_dwc_otg_fiq_stub, (int)(&_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub));
-+ set_fiq_handler((void *) &_dwc_otg_fiq_stub, &_dwc_otg_fiq_stub_end - &_dwc_otg_fiq_stub);
-+ memset(&regs,0,sizeof(regs));
-+
-+ regs.ARM_r8 = (long) dwc_otg_hcd->fiq_state;
-+ if (fiq_fsm_enable) {
-+ regs.ARM_r9 = dwc_otg_hcd->core_if->core_params->host_channels;
-+ //regs.ARM_r10 = dwc_otg_hcd->dma;
-+ regs.ARM_fp = (long) dwc_otg_fiq_fsm;
-+ } else {
-+ regs.ARM_fp = (long) dwc_otg_fiq_nop;
-+ }
-+
-+ regs.ARM_sp = (long) dwc_otg_hcd->fiq_stack + (sizeof(struct fiq_stack) - 4);
-+
-+// __show_regs(&regs);
-+ set_fiq_regs(&regs);
-+
-+ //Set the mphi periph to the required registers
-+ dwc_otg_hcd->fiq_state->mphi_regs.base = otg_dev->os_dep.mphi_base;
-+ dwc_otg_hcd->fiq_state->mphi_regs.ctrl = otg_dev->os_dep.mphi_base + 0x4c;
-+ dwc_otg_hcd->fiq_state->mphi_regs.outdda = otg_dev->os_dep.mphi_base + 0x28;
-+ dwc_otg_hcd->fiq_state->mphi_regs.outddb = otg_dev->os_dep.mphi_base + 0x2c;
-+ dwc_otg_hcd->fiq_state->mphi_regs.intstat = otg_dev->os_dep.mphi_base + 0x50;
-+ dwc_otg_hcd->fiq_state->dwc_regs_base = otg_dev->os_dep.base;
-+ DWC_WARN("MPHI regs_base at 0x%08x", (int)dwc_otg_hcd->fiq_state->mphi_regs.base);
-+ //Enable mphi peripheral
-+ writel((1<<31),dwc_otg_hcd->fiq_state->mphi_regs.ctrl);
-+#ifdef DEBUG
-+ if (readl(dwc_otg_hcd->fiq_state->mphi_regs.ctrl) & 0x80000000)
-+ DWC_WARN("MPHI periph has been enabled");
-+ else
-+ DWC_WARN("MPHI periph has NOT been enabled");
-+#endif
-+ // Enable FIQ interrupt from USB peripheral
-+#ifdef CONFIG_MULTI_IRQ_HANDLER
-+ irq = platform_get_irq(otg_dev->os_dep.platformdev, 1);
-+#else
-+ irq = INTERRUPT_VC_USB;
-+#endif
-+ if (irq < 0) {
-+ DWC_ERROR("Can't get FIQ irq");
-+ return;
-+ }
-+ enable_fiq(irq);
-+ local_fiq_enable();
-+}
-+
-+/**
-+ * Initializes the HCD. This function allocates memory for and initializes the
-+ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
-+ * USB bus with the core and calls the hc_driver->start() function. It returns
-+ * a negative error on failure.
-+ */
-+int hcd_init(dwc_bus_dev_t *_dev)
-+{
-+ struct usb_hcd *hcd = NULL;
-+ dwc_otg_hcd_t *dwc_otg_hcd = NULL;
-+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
-+ int retval = 0;
-+ u64 dmamask;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev);
-+
-+ /* Set device flags indicating whether the HCD supports DMA. */
-+ if (dwc_otg_is_dma_enable(otg_dev->core_if))
-+ dmamask = DMA_BIT_MASK(32);
-+ else
-+ dmamask = 0;
-+
-+#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
-+ dma_set_mask(&_dev->dev, dmamask);
-+ dma_set_coherent_mask(&_dev->dev, dmamask);
-+#elif defined(PCI_INTERFACE)
-+ pci_set_dma_mask(_dev, dmamask);
-+ pci_set_consistent_dma_mask(_dev, dmamask);
-+#endif
-+
-+ /*
-+ * Allocate memory for the base HCD plus the DWC OTG HCD.
-+ * Initialize the base HCD.
-+ */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
-+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id);
-+#else
-+ hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev));
-+ hcd->has_tt = 1;
-+// hcd->uses_new_polling = 1;
-+// hcd->poll_rh = 0;
-+#endif
-+ if (!hcd) {
-+ retval = -ENOMEM;
-+ goto error1;
-+ }
-+
-+ hcd->regs = otg_dev->os_dep.base;
-+
-+
-+ /* Initialize the DWC OTG HCD. */
-+ dwc_otg_hcd = dwc_otg_hcd_alloc_hcd();
-+ if (!dwc_otg_hcd) {
-+ goto error2;
-+ }
-+ ((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd =
-+ dwc_otg_hcd;
-+ otg_dev->hcd = dwc_otg_hcd;
-+ otg_dev->hcd->otg_dev = otg_dev;
-+
-+ if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) {
-+ goto error2;
-+ }
-+
-+ if (fiq_enable) {
-+ if (num_online_cpus() > 1) {
-+ /* bcm2709: can run the FIQ on a separate core to IRQs */
-+ smp_call_function_single(1, hcd_init_fiq, otg_dev, 1);
-+ } else {
-+ smp_call_function_single(0, hcd_init_fiq, otg_dev, 1);
-+ }
-+ }
-+
-+ hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd);
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel)
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later
-+ hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if);
-+#endif
-+ /* Don't support SG list at this point */
-+ hcd->self.sg_tablesize = 0;
-+#endif
-+ /*
-+ * Finish generic HCD initialization and start the HCD. This function
-+ * allocates the DMA buffer pool, registers the USB bus, requests the
-+ * IRQ line, and calls hcd_start method.
-+ */
-+#ifdef PLATFORM_INTERFACE
-+ retval = usb_add_hcd(hcd, platform_get_irq(_dev, fiq_enable ? 0 : 1), IRQF_SHARED);
-+#else
-+ retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED);
-+#endif
-+ if (retval < 0) {
-+ goto error2;
-+ }
-+
-+ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd);
-+ return 0;
-+
-+error2:
-+ usb_put_hcd(hcd);
-+error1:
-+ return retval;
-+}
-+
-+/**
-+ * Removes the HCD.
-+ * Frees memory and resources associated with the HCD and deregisters the bus.
-+ */
-+void hcd_remove(dwc_bus_dev_t *_dev)
-+{
-+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ struct usb_hcd *hcd;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev);
-+
-+ if (!otg_dev) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
-+ return;
-+ }
-+
-+ dwc_otg_hcd = otg_dev->hcd;
-+
-+ if (!dwc_otg_hcd) {
-+ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
-+ return;
-+ }
-+
-+ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
-+
-+ if (!hcd) {
-+ DWC_DEBUGPL(DBG_ANY,
-+ "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n",
-+ __func__);
-+ return;
-+ }
-+ usb_remove_hcd(hcd);
-+ dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL);
-+ dwc_otg_hcd_remove(dwc_otg_hcd);
-+ usb_put_hcd(hcd);
-+}
-+
-+/* =========================================================================
-+ * Linux HC Driver Functions
-+ * ========================================================================= */
-+
-+/** Initializes the DWC_otg controller and its root hub and prepares it for host
-+ * mode operation. Activates the root port. Returns 0 on success and a negative
-+ * error code on failure. */
-+int hcd_start(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ struct usb_bus *bus;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
-+ bus = hcd_to_bus(hcd);
-+
-+ hcd->state = HC_STATE_RUNNING;
-+ if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) {
-+ return 0;
-+ }
-+
-+ /* Initialize and connect root hub if one is not already attached */
-+ if (bus->root_hub) {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
-+ /* Inform the HUB driver to resume. */
-+ usb_hcd_resume_root_hub(hcd);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
-+ * stopped.
-+ */
-+void hcd_stop(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ dwc_otg_hcd_stop(dwc_otg_hcd);
-+}
-+
-+/** Returns the current frame number. */
-+static int get_frame_number(struct usb_hcd *hcd)
-+{
-+ hprt0_data_t hprt0;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
-+ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
-+ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd) >> 3;
-+ else
-+ return dwc_otg_hcd_get_frame_number(dwc_otg_hcd);
-+}
-+
-+#ifdef DEBUG
-+static void dump_urb_info(struct urb *urb, char *fn_name)
-+{
-+ DWC_PRINTF("%s, urb %p\n", fn_name, urb);
-+ DWC_PRINTF(" Device address: %d\n", usb_pipedevice(urb->pipe));
-+ DWC_PRINTF(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
-+ (usb_pipein(urb->pipe) ? "IN" : "OUT"));
-+ DWC_PRINTF(" Endpoint type: %s\n", ( {
-+ char *pipetype;
-+ switch (usb_pipetype(urb->pipe)) {
-+case PIPE_CONTROL:
-+pipetype = "CONTROL"; break; case PIPE_BULK:
-+pipetype = "BULK"; break; case PIPE_INTERRUPT:
-+pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS:
-+pipetype = "ISOCHRONOUS"; break; default:
-+ pipetype = "UNKNOWN"; break;};
-+ pipetype;}
-+ )) ;
-+ DWC_PRINTF(" Speed: %s\n", ( {
-+ char *speed; switch (urb->dev->speed) {
-+case USB_SPEED_HIGH:
-+speed = "HIGH"; break; case USB_SPEED_FULL:
-+speed = "FULL"; break; case USB_SPEED_LOW:
-+speed = "LOW"; break; default:
-+ speed = "UNKNOWN"; break;};
-+ speed;}
-+ )) ;
-+ DWC_PRINTF(" Max packet size: %d\n",
-+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
-+ DWC_PRINTF(" Data buffer length: %d\n", urb->transfer_buffer_length);
-+ DWC_PRINTF(" Transfer buffer: %p, Transfer DMA: %p\n",
-+ urb->transfer_buffer, (void *)urb->transfer_dma);
-+ DWC_PRINTF(" Setup buffer: %p, Setup DMA: %p\n",
-+ urb->setup_packet, (void *)urb->setup_dma);
-+ DWC_PRINTF(" Interval: %d\n", urb->interval);
-+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
-+ int i;
-+ for (i = 0; i < urb->number_of_packets; i++) {
-+ DWC_PRINTF(" ISO Desc %d:\n", i);
-+ DWC_PRINTF(" offset: %d, length %d\n",
-+ urb->iso_frame_desc[i].offset,
-+ urb->iso_frame_desc[i].length);
-+ }
-+ }
-+}
-+#endif
-+
-+/** Starts processing a USB transfer request specified by a USB Request Block
-+ * (URB). mem_flags indicates the type of memory allocation to use while
-+ * processing this URB. */
-+static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ struct usb_host_endpoint *ep,
-+#endif
-+ struct urb *urb, gfp_t mem_flags)
-+{
-+ int retval = 0;
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
-+ struct usb_host_endpoint *ep = urb->ep;
-+#endif
-+ dwc_irqflags_t irqflags;
-+ void **ref_ep_hcpriv = &ep->hcpriv;
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ dwc_otg_hcd_urb_t *dwc_otg_urb;
-+ int i;
-+ int alloc_bandwidth = 0;
-+ uint8_t ep_type = 0;
-+ uint32_t flags = 0;
-+ void *buf;
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(urb, "dwc_otg_urb_enqueue");
-+ }
-+#endif
-+
-+ if (!urb->transfer_buffer && urb->transfer_buffer_length)
-+ return -EINVAL;
-+
-+ if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
-+ || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
-+ if (!dwc_otg_hcd_is_bandwidth_allocated
-+ (dwc_otg_hcd, ref_ep_hcpriv)) {
-+ alloc_bandwidth = 1;
-+ }
-+ }
-+
-+ switch (usb_pipetype(urb->pipe)) {
-+ case PIPE_CONTROL:
-+ ep_type = USB_ENDPOINT_XFER_CONTROL;
-+ break;
-+ case PIPE_ISOCHRONOUS:
-+ ep_type = USB_ENDPOINT_XFER_ISOC;
-+ break;
-+ case PIPE_BULK:
-+ ep_type = USB_ENDPOINT_XFER_BULK;
-+ break;
-+ case PIPE_INTERRUPT:
-+ ep_type = USB_ENDPOINT_XFER_INT;
-+ break;
-+ default:
-+ DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe));
-+ }
-+
-+ /* # of packets is often 0 - do we really need to call this then? */
-+ dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd,
-+ urb->number_of_packets,
-+ mem_flags == GFP_ATOMIC ? 1 : 0);
-+
-+ if(dwc_otg_urb == NULL)
-+ return -ENOMEM;
-+
-+ if (!dwc_otg_urb && urb->number_of_packets)
-+ return -ENOMEM;
-+
-+ dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe),
-+ usb_pipeendpoint(urb->pipe), ep_type,
-+ usb_pipein(urb->pipe),
-+ usb_maxpacket(urb->dev, urb->pipe,
-+ !(usb_pipein(urb->pipe))));
-+
-+ buf = urb->transfer_buffer;
-+ if (hcd->self.uses_dma && !buf && urb->transfer_buffer_length) {
-+ /*
-+ * Calculate virtual address from physical address,
-+ * because some class driver may not fill transfer_buffer.
-+ * In Buffer DMA mode virual address is used,
-+ * when handling non DWORD aligned buffers.
-+ */
-+ buf = (void *)__bus_to_virt((unsigned long)urb->transfer_dma);
-+ dev_warn_once(&urb->dev->dev,
-+ "USB transfer_buffer was NULL, will use __bus_to_virt(%pad)=%p\n",
-+ &urb->transfer_dma, buf);
-+ }
-+
-+ if (!(urb->transfer_flags & URB_NO_INTERRUPT))
-+ flags |= URB_GIVEBACK_ASAP;
-+ if (urb->transfer_flags & URB_ZERO_PACKET)
-+ flags |= URB_SEND_ZERO_PACKET;
-+
-+ dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf,
-+ urb->transfer_dma,
-+ urb->transfer_buffer_length,
-+ urb->setup_packet,
-+ urb->setup_dma, flags, urb->interval);
-+
-+ for (i = 0; i < urb->number_of_packets; ++i) {
-+ dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i,
-+ urb->
-+ iso_frame_desc[i].offset,
-+ urb->
-+ iso_frame_desc[i].length);
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags);
-+ urb->hcpriv = dwc_otg_urb;
-+#if USB_URB_EP_LINKING
-+ retval = usb_hcd_link_urb_to_ep(hcd, urb);
-+ if (0 == retval)
-+#endif
-+ {
-+ retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb,
-+ /*(dwc_otg_qh_t **)*/
-+ ref_ep_hcpriv, 1);
-+ if (0 == retval) {
-+ if (alloc_bandwidth) {
-+ allocate_bus_bandwidth(hcd,
-+ dwc_otg_hcd_get_ep_bandwidth(
-+ dwc_otg_hcd, *ref_ep_hcpriv),
-+ urb);
-+ }
-+ } else {
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval);
-+#if USB_URB_EP_LINKING
-+ usb_hcd_unlink_urb_from_ep(hcd, urb);
-+#endif
-+ DWC_FREE(dwc_otg_urb);
-+ urb->hcpriv = NULL;
-+ if (retval == -DWC_E_NO_DEVICE)
-+ retval = -ENODEV;
-+ }
-+ }
-+#if USB_URB_EP_LINKING
-+ else
-+ {
-+ DWC_FREE(dwc_otg_urb);
-+ urb->hcpriv = NULL;
-+ }
-+#endif
-+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags);
-+ return retval;
-+}
-+
-+/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
-+ * success. */
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
-+#else
-+static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
-+#endif
-+{
-+ dwc_irqflags_t flags;
-+ dwc_otg_hcd_t *dwc_otg_hcd;
-+ int rc;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
-+
-+ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+#ifdef DEBUG
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ dump_urb_info(urb, "dwc_otg_urb_dequeue");
-+ }
-+#endif
-+
-+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
-+ rc = usb_hcd_check_unlink_urb(hcd, urb, status);
-+ if (0 == rc) {
-+ if(urb->hcpriv != NULL) {
-+ dwc_otg_hcd_urb_dequeue(dwc_otg_hcd,
-+ (dwc_otg_hcd_urb_t *)urb->hcpriv);
-+
-+ DWC_FREE(urb->hcpriv);
-+ urb->hcpriv = NULL;
-+ }
-+ }
-+
-+ if (0 == rc) {
-+ /* Higher layer software sets URB status. */
-+#if USB_URB_EP_LINKING
-+ usb_hcd_unlink_urb_from_ep(hcd, urb);
-+#endif
-+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
-+
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ usb_hcd_giveback_urb(hcd, urb);
-+#else
-+ usb_hcd_giveback_urb(hcd, urb, status);
-+#endif
-+ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
-+ DWC_PRINTF("Called usb_hcd_giveback_urb() \n");
-+ DWC_PRINTF(" 1urb->status = %d\n", urb->status);
-+ }
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n");
-+ } else {
-+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n",
-+ rc);
-+ }
-+
-+ return rc;
-+}
-+
-+/* Frees resources in the DWC_otg controller related to a given endpoint. Also
-+ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
-+ * must already be dequeued. */
-+static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ DWC_DEBUGPL(DBG_HCD,
-+ "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
-+ "endpoint=%d\n", ep->desc.bEndpointAddress,
-+ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
-+ dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250);
-+ ep->hcpriv = NULL;
-+}
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
-+/* Resets endpoint specific parameter values, in current version used to reset
-+ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */
-+static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
-+{
-+ dwc_irqflags_t flags;
-+ struct usb_device *udev = NULL;
-+ int epnum = usb_endpoint_num(&ep->desc);
-+ int is_out = usb_endpoint_dir_out(&ep->desc);
-+ int is_control = usb_endpoint_xfer_control(&ep->desc);
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep);
-+
-+ if (dev)
-+ udev = to_usb_device(dev);
-+ else
-+ return;
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum);
-+
-+ DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
-+ usb_settoggle(udev, epnum, is_out, 0);
-+ if (is_control)
-+ usb_settoggle(udev, epnum, !is_out, 0);
-+
-+ if (ep->hcpriv) {
-+ dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv);
-+ }
-+ DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
-+}
-+#endif
-+
-+/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
-+ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
-+ * interrupt.
-+ *
-+ * This function is called by the USB core when an interrupt occurs */
-+static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+ int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
-+ if (retval != 0) {
-+ S3C2410X_CLEAR_EINTPEND();
-+ }
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/** Creates Status Change bitmap for the root hub and root port. The bitmap is
-+ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
-+ * is the status change indicator for the single root port. Returns 1 if either
-+ * change indicator is 1, otherwise returns 0. */
-+int hub_status_data(struct usb_hcd *hcd, char *buf)
-+{
-+ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
-+
-+ buf[0] = 0;
-+ buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1;
-+
-+ return (buf[0] != 0);
-+}
-+
-+/** Handles hub class-specific requests. */
-+int hub_control(struct usb_hcd *hcd,
-+ u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
-+{
-+ int retval;
-+
-+ retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd),
-+ typeReq, wValue, wIndex, buf, wLength);
-+
-+ switch (retval) {
-+ case -DWC_E_INVALID:
-+ retval = -EINVAL;
-+ break;
-+ }
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
-@@ -0,0 +1,963 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
-+ * $Revision: #44 $
-+ * $Date: 2011/10/26 $
-+ * $Change: 1873028 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_DEVICE_ONLY
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the functions to manage Queue Heads and Queue
-+ * Transfer Descriptors.
-+ */
-+
-+#include "dwc_otg_hcd.h"
-+#include "dwc_otg_regs.h"
-+
-+extern bool microframe_schedule;
-+
-+/**
-+ * Free each QTD in the QH's QTD-list then free the QH. QH should already be
-+ * removed from a list. QTD list should already be empty if called from URB
-+ * Dequeue.
-+ *
-+ * @param hcd HCD instance.
-+ * @param qh The QH to free.
-+ */
-+void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ dwc_otg_qtd_t *qtd, *qtd_tmp;
-+ dwc_irqflags_t flags;
-+ uint32_t buf_size = 0;
-+ uint8_t *align_buf_virt = NULL;
-+ dwc_dma_t align_buf_dma;
-+ struct device *dev = dwc_otg_hcd_to_dev(hcd);
-+
-+ /* Free each QTD in the QTD list */
-+ DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
-+ DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
-+ DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
-+ dwc_otg_hcd_qtd_free(qtd);
-+ }
-+
-+ if (hcd->core_if->dma_desc_enable) {
-+ dwc_otg_hcd_qh_free_ddma(hcd, qh);
-+ } else if (qh->dw_align_buf) {
-+ if (qh->ep_type == UE_ISOCHRONOUS) {
-+ buf_size = 4096;
-+ } else {
-+ buf_size = hcd->core_if->core_params->max_transfer_size;
-+ }
-+ align_buf_virt = qh->dw_align_buf;
-+ align_buf_dma = qh->dw_align_buf_dma;
-+ }
-+
-+ DWC_FREE(qh);
-+ DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
-+ if (align_buf_virt)
-+ DWC_DMA_FREE(dev, buf_size, align_buf_virt, align_buf_dma);
-+ return;
-+}
-+
-+#define BitStuffTime(bytecount) ((8 * 7* bytecount) / 6)
-+#define HS_HOST_DELAY 5 /* nanoseconds */
-+#define FS_LS_HOST_DELAY 1000 /* nanoseconds */
-+#define HUB_LS_SETUP 333 /* nanoseconds */
-+#define NS_TO_US(ns) ((ns + 500) / 1000)
-+ /* convert & round nanoseconds to microseconds */
-+
-+static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount)
-+{
-+ unsigned long retval;
-+
-+ switch (speed) {
-+ case USB_SPEED_HIGH:
-+ if (is_isoc) {
-+ retval =
-+ ((38 * 8 * 2083) +
-+ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
-+ HS_HOST_DELAY;
-+ } else {
-+ retval =
-+ ((55 * 8 * 2083) +
-+ (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
-+ HS_HOST_DELAY;
-+ }
-+ break;
-+ case USB_SPEED_FULL:
-+ if (is_isoc) {
-+ retval =
-+ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
-+ if (is_in) {
-+ retval = 7268 + FS_LS_HOST_DELAY + retval;
-+ } else {
-+ retval = 6265 + FS_LS_HOST_DELAY + retval;
-+ }
-+ } else {
-+ retval =
-+ (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
-+ retval = 9107 + FS_LS_HOST_DELAY + retval;
-+ }
-+ break;
-+ case USB_SPEED_LOW:
-+ if (is_in) {
-+ retval =
-+ (67667 * (31 + 10 * BitStuffTime(bytecount))) /
-+ 1000;
-+ retval =
-+ 64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
-+ retval;
-+ } else {
-+ retval =
-+ (66700 * (31 + 10 * BitStuffTime(bytecount))) /
-+ 1000;
-+ retval =
-+ 64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
-+ retval;
-+ }
-+ break;
-+ default:
-+ DWC_WARN("Unknown device speed\n");
-+ retval = -1;
-+ }
-+
-+ return NS_TO_US(retval);
-+}
-+
-+/**
-+ * Initializes a QH structure.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh The QH to init.
-+ * @param urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH.
-+ */
-+#define SCHEDULE_SLOP 10
-+void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb)
-+{
-+ char *speed, *type;
-+ int dev_speed;
-+ uint32_t hub_addr, hub_port;
-+
-+ dwc_memset(qh, 0, sizeof(dwc_otg_qh_t));
-+
-+ /* Initialize QH */
-+ qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
-+ qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
-+
-+ qh->data_toggle = DWC_OTG_HC_PID_DATA0;
-+ qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info);
-+ DWC_CIRCLEQ_INIT(&qh->qtd_list);
-+ DWC_LIST_INIT(&qh->qh_list_entry);
-+ qh->channel = NULL;
-+
-+ /* FS/LS Enpoint on HS Hub
-+ * NOT virtual root hub */
-+ dev_speed = hcd->fops->speed(hcd, urb->priv);
-+
-+ hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port);
-+ qh->do_split = 0;
-+ if (microframe_schedule)
-+ qh->speed = dev_speed;
-+
-+ qh->nak_frame = 0xffff;
-+
-+ if (((dev_speed == USB_SPEED_LOW) ||
-+ (dev_speed == USB_SPEED_FULL)) &&
-+ (hub_addr != 0 && hub_addr != 1)) {
-+ DWC_DEBUGPL(DBG_HCD,
-+ "QH init: EP %d: TT found at hub addr %d, for port %d\n",
-+ dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr,
-+ hub_port);
-+ qh->do_split = 1;
-+ qh->skip_count = 0;
-+ }
-+
-+ if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) {
-+ /* Compute scheduling parameters once and save them. */
-+ hprt0_data_t hprt;
-+
-+ /** @todo Account for split transfers in the bus time. */
-+ int bytecount =
-+ dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
-+
-+ qh->usecs =
-+ calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed),
-+ qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS),
-+ bytecount);
-+ /* Start in a slightly future (micro)frame. */
-+ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
-+ SCHEDULE_SLOP);
-+ qh->interval = urb->interval;
-+
-+#if 0
-+ /* Increase interrupt polling rate for debugging. */
-+ if (qh->ep_type == UE_INTERRUPT) {
-+ qh->interval = 8;
-+ }
-+#endif
-+ hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0);
-+ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
-+ ((dev_speed == USB_SPEED_LOW) ||
-+ (dev_speed == USB_SPEED_FULL))) {
-+ qh->interval *= 8;
-+ qh->sched_frame |= 0x7;
-+ qh->start_split_frame = qh->sched_frame;
-+ }
-+
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n",
-+ dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n",
-+ dwc_otg_hcd_get_ep_num(&urb->pipe_info),
-+ dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
-+ switch (dev_speed) {
-+ case USB_SPEED_LOW:
-+ qh->dev_speed = DWC_OTG_EP_SPEED_LOW;
-+ speed = "low";
-+ break;
-+ case USB_SPEED_FULL:
-+ qh->dev_speed = DWC_OTG_EP_SPEED_FULL;
-+ speed = "full";
-+ break;
-+ case USB_SPEED_HIGH:
-+ qh->dev_speed = DWC_OTG_EP_SPEED_HIGH;
-+ speed = "high";
-+ break;
-+ default:
-+ speed = "?";
-+ break;
-+ }
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed);
-+
-+ switch (qh->ep_type) {
-+ case UE_ISOCHRONOUS:
-+ type = "isochronous";
-+ break;
-+ case UE_INTERRUPT:
-+ type = "interrupt";
-+ break;
-+ case UE_CONTROL:
-+ type = "control";
-+ break;
-+ case UE_BULK:
-+ type = "bulk";
-+ break;
-+ default:
-+ type = "?";
-+ break;
-+ }
-+
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n", type);
-+
-+#ifdef DEBUG
-+ if (qh->ep_type == UE_INTERRUPT) {
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
-+ qh->usecs);
-+ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
-+ qh->interval);
-+ }
-+#endif
-+
-+}
-+
-+/**
-+ * This function allocates and initializes a QH.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param urb Holds the information about the device/endpoint that we need
-+ * to initialize the QH.
-+ * @param atomic_alloc Flag to do atomic allocation if needed
-+ *
-+ * @return Returns pointer to the newly allocated QH, or NULL on error. */
-+dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
-+ dwc_otg_hcd_urb_t * urb, int atomic_alloc)
-+{
-+ dwc_otg_qh_t *qh;
-+
-+ /* Allocate memory */
-+ /** @todo add memflags argument */
-+ qh = dwc_otg_hcd_qh_alloc(atomic_alloc);
-+ if (qh == NULL) {
-+ DWC_ERROR("qh allocation failed");
-+ return NULL;
-+ }
-+
-+ qh_init(hcd, qh, urb);
-+
-+ if (hcd->core_if->dma_desc_enable
-+ && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) {
-+ dwc_otg_hcd_qh_free(hcd, qh);
-+ return NULL;
-+ }
-+
-+ return qh;
-+}
-+
-+/* microframe_schedule=0 start */
-+
-+/**
-+ * Checks that a channel is available for a periodic transfer.
-+ *
-+ * @return 0 if successful, negative error code otherise.
-+ */
-+static int periodic_channel_available(dwc_otg_hcd_t * hcd)
-+{
-+ /*
-+ * Currently assuming that there is a dedicated host channnel for each
-+ * periodic transaction plus at least one host channel for
-+ * non-periodic transactions.
-+ */
-+ int status;
-+ int num_channels;
-+
-+ num_channels = hcd->core_if->core_params->host_channels;
-+ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels)
-+ && (hcd->periodic_channels < num_channels - 1)) {
-+ status = 0;
-+ } else {
-+ DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
-+ __func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels); //NOTICE
-+ status = -DWC_E_NO_SPACE;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Checks that there is sufficient bandwidth for the specified QH in the
-+ * periodic schedule. For simplicity, this calculation assumes that all the
-+ * transfers in the periodic schedule may occur in the same (micro)frame.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH containing periodic bandwidth required.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ int status;
-+ int16_t max_claimed_usecs;
-+
-+ status = 0;
-+
-+ if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) {
-+ /*
-+ * High speed mode.
-+ * Max periodic usecs is 80% x 125 usec = 100 usec.
-+ */
-+
-+ max_claimed_usecs = 100 - qh->usecs;
-+ } else {
-+ /*
-+ * Full speed mode.
-+ * Max periodic usecs is 90% x 1000 usec = 900 usec.
-+ */
-+ max_claimed_usecs = 900 - qh->usecs;
-+ }
-+
-+ if (hcd->periodic_usecs > max_claimed_usecs) {
-+ DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs); //NOTICE
-+ status = -DWC_E_NO_SPACE;
-+ }
-+
-+ return status;
-+}
-+
-+/* microframe_schedule=0 end */
-+
-+/**
-+ * Microframe scheduler
-+ * track the total use in hcd->frame_usecs
-+ * keep each qh use in qh->frame_usecs
-+ * when surrendering the qh then donate the time back
-+ */
-+const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
-+
-+/*
-+ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
-+ */
-+int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
-+{
-+ int i;
-+ for (i=0; i<8; i++) {
-+ _hcd->frame_usecs[i] = max_uframe_usecs[i];
-+ }
-+ return 0;
-+}
-+
-+static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ int i;
-+ unsigned short utime;
-+ int t_left;
-+ int ret;
-+ int done;
-+
-+ ret = -1;
-+ utime = _qh->usecs;
-+ t_left = utime;
-+ i = 0;
-+ done = 0;
-+ while (done == 0) {
-+ /* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
-+ if (utime <= _hcd->frame_usecs[i]) {
-+ _hcd->frame_usecs[i] -= utime;
-+ _qh->frame_usecs[i] += utime;
-+ t_left -= utime;
-+ ret = i;
-+ done = 1;
-+ return ret;
-+ } else {
-+ i++;
-+ if (i == 8) {
-+ done = 1;
-+ ret = -1;
-+ }
-+ }
-+ }
-+ return ret;
-+ }
-+
-+/*
-+ * use this for FS apps that can span multiple uframes
-+ */
-+static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ int i;
-+ int j;
-+ unsigned short utime;
-+ int t_left;
-+ int ret;
-+ int done;
-+ unsigned short xtime;
-+
-+ ret = -1;
-+ utime = _qh->usecs;
-+ t_left = utime;
-+ i = 0;
-+ done = 0;
-+loop:
-+ while (done == 0) {
-+ if(_hcd->frame_usecs[i] <= 0) {
-+ i++;
-+ if (i == 8) {
-+ done = 1;
-+ ret = -1;
-+ }
-+ goto loop;
-+ }
-+
-+ /*
-+ * we need n consecutive slots
-+ * so use j as a start slot j plus j+1 must be enough time (for now)
-+ */
-+ xtime= _hcd->frame_usecs[i];
-+ for (j = i+1 ; j < 8 ; j++ ) {
-+ /*
-+ * if we add this frame remaining time to xtime we may
-+ * be OK, if not we need to test j for a complete frame
-+ */
-+ if ((xtime+_hcd->frame_usecs[j]) < utime) {
-+ if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
-+ j = 8;
-+ ret = -1;
-+ continue;
-+ }
-+ }
-+ if (xtime >= utime) {
-+ ret = i;
-+ j = 8; /* stop loop with a good value ret */
-+ continue;
-+ }
-+ /* add the frame time to x time */
-+ xtime += _hcd->frame_usecs[j];
-+ /* we must have a fully available next frame or break */
-+ if ((xtime < utime)
-+ && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
-+ ret = -1;
-+ j = 8; /* stop loop with a bad value ret */
-+ continue;
-+ }
-+ }
-+ if (ret >= 0) {
-+ t_left = utime;
-+ for (j = i; (t_left>0) && (j < 8); j++ ) {
-+ t_left -= _hcd->frame_usecs[j];
-+ if ( t_left <= 0 ) {
-+ _qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
-+ _hcd->frame_usecs[j]= -t_left;
-+ ret = i;
-+ done = 1;
-+ } else {
-+ _qh->frame_usecs[j] += _hcd->frame_usecs[j];
-+ _hcd->frame_usecs[j] = 0;
-+ }
-+ }
-+ } else {
-+ i++;
-+ if (i == 8) {
-+ done = 1;
-+ ret = -1;
-+ }
-+ }
-+ }
-+ return ret;
-+}
-+
-+static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
-+{
-+ int ret;
-+ ret = -1;
-+
-+ if (_qh->speed == USB_SPEED_HIGH) {
-+ /* if this is a hs transaction we need a full frame */
-+ ret = find_single_uframe(_hcd, _qh);
-+ } else {
-+ /* if this is a fs transaction we may need a sequence of frames */
-+ ret = find_multi_uframe(_hcd, _qh);
-+ }
-+ return ret;
-+}
-+
-+/**
-+ * Checks that the max transfer size allowed in a host channel is large enough
-+ * to handle the maximum data transfer in a single (micro)frame for a periodic
-+ * transfer.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for a periodic endpoint.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ int status;
-+ uint32_t max_xfer_size;
-+ uint32_t max_channel_xfer_size;
-+
-+ status = 0;
-+
-+ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
-+ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
-+
-+ if (max_xfer_size > max_channel_xfer_size) {
-+ DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n",
-+ __func__, max_xfer_size, max_channel_xfer_size); //NOTICE
-+ status = -DWC_E_NO_SPACE;
-+ }
-+
-+ return status;
-+}
-+
-+
-+
-+/**
-+ * Schedules an interrupt or isochronous transfer in the periodic schedule.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for the periodic transfer. The QH should already contain the
-+ * scheduling information.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ int status = 0;
-+
-+ if (microframe_schedule) {
-+ int frame;
-+ status = find_uframe(hcd, qh);
-+ frame = -1;
-+ if (status == 0) {
-+ frame = 7;
-+ } else {
-+ if (status > 0 )
-+ frame = status-1;
-+ }
-+
-+ /* Set the new frame up */
-+ if (frame > -1) {
-+ qh->sched_frame &= ~0x7;
-+ qh->sched_frame |= (frame & 7);
-+ }
-+
-+ if (status != -1)
-+ status = 0;
-+ } else {
-+ status = periodic_channel_available(hcd);
-+ if (status) {
-+ DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__); //NOTICE
-+ return status;
-+ }
-+
-+ status = check_periodic_bandwidth(hcd, qh);
-+ }
-+ if (status) {
-+ DWC_INFO("%s: Insufficient periodic bandwidth for "
-+ "periodic transfer.\n", __func__);
-+ return status;
-+ }
-+ status = check_max_xfer_size(hcd, qh);
-+ if (status) {
-+ DWC_INFO("%s: Channel max transfer size too small "
-+ "for periodic transfer.\n", __func__);
-+ return status;
-+ }
-+
-+ if (hcd->core_if->dma_desc_enable) {
-+ /* Don't rely on SOF and start in ready schedule */
-+ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry);
-+ }
-+ else {
-+ if(fiq_enable && (DWC_LIST_EMPTY(&hcd->periodic_sched_inactive) || dwc_frame_num_le(qh->sched_frame, hcd->fiq_state->next_sched_frame)))
-+ {
-+ hcd->fiq_state->next_sched_frame = qh->sched_frame;
-+
-+ }
-+ /* Always start in the inactive schedule. */
-+ DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry);
-+ }
-+
-+ if (!microframe_schedule) {
-+ /* Reserve the periodic channel. */
-+ hcd->periodic_channels++;
-+ }
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ hcd->periodic_usecs += qh->usecs;
-+
-+ return status;
-+}
-+
-+
-+/**
-+ * This function adds a QH to either the non periodic or periodic schedule if
-+ * it is not already in the schedule. If the QH is already in the schedule, no
-+ * action is taken.
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ int status = 0;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
-+ /* QH already in a schedule. */
-+ return status;
-+ }
-+
-+ /* Add the new QH to the appropriate schedule */
-+ if (dwc_qh_is_non_per(qh)) {
-+ /* Always start in the inactive schedule. */
-+ DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive,
-+ &qh->qh_list_entry);
-+ //hcd->fiq_state->kick_np_queues = 1;
-+ } else {
-+ status = schedule_periodic(hcd, qh);
-+ if ( !hcd->periodic_qh_count ) {
-+ intr_mask.b.sofintr = 1;
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ } else {
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
-+ }
-+ }
-+ hcd->periodic_qh_count++;
-+ }
-+
-+ return status;
-+}
-+
-+/**
-+ * Removes an interrupt or isochronous transfer from the periodic schedule.
-+ *
-+ * @param hcd The HCD state structure for the DWC OTG controller.
-+ * @param qh QH for the periodic transfer.
-+ */
-+static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ int i;
-+ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
-+
-+ /* Update claimed usecs per (micro)frame. */
-+ hcd->periodic_usecs -= qh->usecs;
-+
-+ if (!microframe_schedule) {
-+ /* Release the periodic channel reservation. */
-+ hcd->periodic_channels--;
-+ } else {
-+ for (i = 0; i < 8; i++) {
-+ hcd->frame_usecs[i] += qh->frame_usecs[i];
-+ qh->frame_usecs[i] = 0;
-+ }
-+ }
-+}
-+
-+/**
-+ * Removes a QH from either the non-periodic or periodic schedule. Memory is
-+ * not freed.
-+ *
-+ * @param hcd The HCD state structure.
-+ * @param qh QH to remove from schedule. */
-+void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
-+{
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
-+ /* QH is not in a schedule. */
-+ return;
-+ }
-+
-+ if (dwc_qh_is_non_per(qh)) {
-+ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
-+ hcd->non_periodic_qh_ptr =
-+ hcd->non_periodic_qh_ptr->next;
-+ }
-+ DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
-+ //if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_inactive))
-+ // hcd->fiq_state->kick_np_queues = 1;
-+ } else {
-+ deschedule_periodic(hcd, qh);
-+ hcd->periodic_qh_count--;
-+ if( !hcd->periodic_qh_count && !fiq_fsm_enable ) {
-+ intr_mask.b.sofintr = 1;
-+ if (fiq_enable) {
-+ local_fiq_disable();
-+ fiq_fsm_spin_lock(&hcd->fiq_state->lock);
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ fiq_fsm_spin_unlock(&hcd->fiq_state->lock);
-+ local_fiq_enable();
-+ } else {
-+ DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
-+ * non-periodic schedule. The QH is added to the inactive non-periodic
-+ * schedule if any QTDs are still attached to the QH.
-+ *
-+ * For periodic QHs, the QH is removed from the periodic queued schedule. If
-+ * there are any QTDs still attached to the QH, the QH is added to either the
-+ * periodic inactive schedule or the periodic ready schedule and its next
-+ * scheduled frame is calculated. The QH is placed in the ready schedule if
-+ * the scheduled frame has been reached already. Otherwise it's placed in the
-+ * inactive schedule. If there are no QTDs attached to the QH, the QH is
-+ * completely removed from the periodic schedule.
-+ */
-+void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
-+ int sched_next_periodic_split)
-+{
-+ if (dwc_qh_is_non_per(qh)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
-+ /* Add back to inactive non-periodic schedule. */
-+ dwc_otg_hcd_qh_add(hcd, qh);
-+ //hcd->fiq_state->kick_np_queues = 1;
-+ }
-+ } else {
-+ uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd);
-+
-+ if (qh->do_split) {
-+ /* Schedule the next continuing periodic split transfer */
-+ if (sched_next_periodic_split) {
-+
-+ qh->sched_frame = frame_number;
-+
-+ if (dwc_frame_num_le(frame_number,
-+ dwc_frame_num_inc
-+ (qh->start_split_frame,
-+ 1))) {
-+ /*
-+ * Allow one frame to elapse after start
-+ * split microframe before scheduling
-+ * complete split, but DONT if we are
-+ * doing the next start split in the
-+ * same frame for an ISOC out.
-+ */
-+ if ((qh->ep_type != UE_ISOCHRONOUS) ||
-+ (qh->ep_is_in != 0)) {
-+ qh->sched_frame =
-+ dwc_frame_num_inc(qh->sched_frame, 1);
-+ }
-+ }
-+ } else {
-+ qh->sched_frame =
-+ dwc_frame_num_inc(qh->start_split_frame,
-+ qh->interval);
-+ if (dwc_frame_num_le
-+ (qh->sched_frame, frame_number)) {
-+ qh->sched_frame = frame_number;
-+ }
-+ qh->sched_frame |= 0x7;
-+ qh->start_split_frame = qh->sched_frame;
-+ }
-+ } else {
-+ qh->sched_frame =
-+ dwc_frame_num_inc(qh->sched_frame, qh->interval);
-+ if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
-+ qh->sched_frame = frame_number;
-+ }
-+ }
-+
-+ if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
-+ dwc_otg_hcd_qh_remove(hcd, qh);
-+ } else {
-+ /*
-+ * Remove from periodic_sched_queued and move to
-+ * appropriate queue.
-+ */
-+ if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) ||
-+ (!microframe_schedule && qh->sched_frame == frame_number)) {
-+ DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
-+ &qh->qh_list_entry);
-+ } else {
-+ if(fiq_enable && !dwc_frame_num_le(hcd->fiq_state->next_sched_frame, qh->sched_frame))
-+ {
-+ hcd->fiq_state->next_sched_frame = qh->sched_frame;
-+ }
-+
-+ DWC_LIST_MOVE_HEAD
-+ (&hcd->periodic_sched_inactive,
-+ &qh->qh_list_entry);
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * This function allocates and initializes a QTD.
-+ *
-+ * @param urb The URB to create a QTD from. Each URB-QTD pair will end up
-+ * pointing to each other so each pair should have a unique correlation.
-+ * @param atomic_alloc Flag to do atomic alloc if needed
-+ *
-+ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
-+dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc)
-+{
-+ dwc_otg_qtd_t *qtd;
-+
-+ qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc);
-+ if (qtd == NULL) {
-+ return NULL;
-+ }
-+
-+ dwc_otg_hcd_qtd_init(qtd, urb);
-+ return qtd;
-+}
-+
-+/**
-+ * Initializes a QTD structure.
-+ *
-+ * @param qtd The QTD to initialize.
-+ * @param urb The URB to use for initialization. */
-+void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb)
-+{
-+ dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t));
-+ qtd->urb = urb;
-+ if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) {
-+ /*
-+ * The only time the QTD data toggle is used is on the data
-+ * phase of control transfers. This phase always starts with
-+ * DATA1.
-+ */
-+ qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
-+ qtd->control_phase = DWC_OTG_CONTROL_SETUP;
-+ }
-+
-+ /* start split */
-+ qtd->complete_split = 0;
-+ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
-+ qtd->isoc_split_offset = 0;
-+ qtd->in_process = 0;
-+
-+ /* Store the qtd ptr in the urb to reference what QTD. */
-+ urb->qtd = qtd;
-+ return;
-+}
-+
-+/**
-+ * This function adds a QTD to the QTD-list of a QH. It will find the correct
-+ * QH to place the QTD into. If it does not find a QH, then it will create a
-+ * new QH. If the QH to which the QTD is added is not currently scheduled, it
-+ * is placed into the proper schedule based on its EP type.
-+ * HCD lock must be held and interrupts must be disabled on entry
-+ *
-+ * @param[in] qtd The QTD to add
-+ * @param[in] hcd The DWC HCD structure
-+ * @param[out] qh out parameter to return queue head
-+ * @param atomic_alloc Flag to do atomic alloc if needed
-+ *
-+ * @return 0 if successful, negative error code otherwise.
-+ */
-+int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd,
-+ dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc)
-+{
-+ int retval = 0;
-+ dwc_otg_hcd_urb_t *urb = qtd->urb;
-+
-+ /*
-+ * Get the QH which holds the QTD-list to insert to. Create QH if it
-+ * doesn't exist.
-+ */
-+ if (*qh == NULL) {
-+ *qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc);
-+ if (*qh == NULL) {
-+ retval = -DWC_E_NO_MEMORY;
-+ goto done;
-+ } else {
-+ if (fiq_enable)
-+ hcd->fiq_state->kick_np_queues = 1;
-+ }
-+ }
-+ retval = dwc_otg_hcd_qh_add(hcd, *qh);
-+ if (retval == 0) {
-+ DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd,
-+ qtd_list_entry);
-+ qtd->qh = *qh;
-+ }
-+done:
-+
-+ return retval;
-+}
-+
-+#endif /* DWC_DEVICE_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
-@@ -0,0 +1,188 @@
-+#ifndef _DWC_OS_DEP_H_
-+#define _DWC_OS_DEP_H_
-+
-+/**
-+ * @file
-+ *
-+ * This file contains OS dependent structures.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/errno.h>
-+#include <linux/types.h>
-+#include <linux/slab.h>
-+#include <linux/list.h>
-+#include <linux/interrupt.h>
-+#include <linux/ctype.h>
-+#include <linux/string.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/jiffies.h>
-+#include <linux/delay.h>
-+#include <linux/timer.h>
-+#include <linux/workqueue.h>
-+#include <linux/stat.h>
-+#include <linux/pci.h>
-+
-+#include <linux/version.h>
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
-+# include <linux/irq.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-+# include <linux/usb/ch9.h>
-+#else
-+# include <linux/usb_ch9.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
-+# include <linux/usb/gadget.h>
-+#else
-+# include <linux/usb_gadget.h>
-+#endif
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
-+# include <asm/irq.h>
-+#endif
-+
-+#ifdef PCI_INTERFACE
-+# include <asm/io.h>
-+#endif
-+
-+#ifdef LM_INTERFACE
-+# include <asm/unaligned.h>
-+# include <asm/sizes.h>
-+# include <asm/param.h>
-+# include <asm/io.h>
-+# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
-+# include <asm/arch/hardware.h>
-+# include <asm/arch/lm.h>
-+# include <asm/arch/irqs.h>
-+# include <asm/arch/regs-irq.h>
-+# else
-+/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure -
-+ here we assume that the machine architecture provides definitions
-+ in its own header
-+*/
-+# include <mach/lm.h>
-+# include <mach/hardware.h>
-+# endif
-+#endif
-+
-+#ifdef PLATFORM_INTERFACE
-+#include <linux/platform_device.h>
-+#include <asm/mach/map.h>
-+#endif
-+
-+/** The OS page size */
-+#define DWC_OS_PAGE_SIZE PAGE_SIZE
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
-+typedef int gfp_t;
-+#endif
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
-+# define IRQF_SHARED SA_SHIRQ
-+#endif
-+
-+typedef struct os_dependent {
-+ /** Base address returned from ioremap() */
-+ void *base;
-+
-+ /** Register offset for Diagnostic API */
-+ uint32_t reg_offset;
-+
-+ /** Base address for MPHI peripheral */
-+ void *mphi_base;
-+
-+#ifdef LM_INTERFACE
-+ struct lm_device *lmdev;
-+#elif defined(PCI_INTERFACE)
-+ struct pci_dev *pcidev;
-+
-+ /** Start address of a PCI region */
-+ resource_size_t rsrc_start;
-+
-+ /** Length address of a PCI region */
-+ resource_size_t rsrc_len;
-+#elif defined(PLATFORM_INTERFACE)
-+ struct platform_device *platformdev;
-+#endif
-+
-+} os_dependent_t;
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+
-+
-+/* Type for the our device on the chosen bus */
-+#if defined(LM_INTERFACE)
-+typedef struct lm_device dwc_bus_dev_t;
-+#elif defined(PCI_INTERFACE)
-+typedef struct pci_dev dwc_bus_dev_t;
-+#elif defined(PLATFORM_INTERFACE)
-+typedef struct platform_device dwc_bus_dev_t;
-+#endif
-+
-+/* Helper macro to retrieve drvdata from the device on the chosen bus */
-+#if defined(LM_INTERFACE)
-+#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev)
-+#elif defined(PCI_INTERFACE)
-+#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev)
-+#elif defined(PLATFORM_INTERFACE)
-+#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev)
-+#endif
-+
-+/**
-+ * Helper macro returning the otg_device structure of a given struct device
-+ *
-+ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
-+ */
-+#ifdef LM_INTERFACE
-+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
-+ struct lm_device *lm_dev = \
-+ container_of(_dev, struct lm_device, dev); \
-+ _var = lm_get_drvdata(lm_dev); \
-+ } while (0)
-+
-+#elif defined(PCI_INTERFACE)
-+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
-+ _var = dev_get_drvdata(_dev); \
-+ } while (0)
-+
-+#elif defined(PLATFORM_INTERFACE)
-+#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
-+ struct platform_device *platform_dev = \
-+ container_of(_dev, struct platform_device, dev); \
-+ _var = platform_get_drvdata(platform_dev); \
-+ } while (0)
-+#endif
-+
-+
-+/**
-+ * Helper macro returning the struct dev of the given struct os_dependent
-+ *
-+ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep)
-+ */
-+#ifdef LM_INTERFACE
-+#define DWC_OTG_OS_GETDEV(_osdep) \
-+ ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev)
-+#elif defined(PCI_INTERFACE)
-+#define DWC_OTG_OS_GETDEV(_osdep) \
-+ ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev)
-+#elif defined(PLATFORM_INTERFACE)
-+#define DWC_OTG_OS_GETDEV(_osdep) \
-+ ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev)
-+#endif
-+
-+
-+
-+
-+#endif /* _DWC_OS_DEP_H_ */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
-@@ -0,0 +1,2725 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
-+ * $Revision: #101 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+
-+/** @file
-+ * This file implements PCD Core. All code in this file is portable and doesn't
-+ * use any OS specific functions.
-+ * PCD Core provides Interface, defined in <code><dwc_otg_pcd_if.h></code>
-+ * header file, which can be used to implement OS specific PCD interface.
-+ *
-+ * An important function of the PCD is managing interrupts generated
-+ * by the DWC_otg controller. The implementation of the DWC_otg device
-+ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
-+ *
-+ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
-+ * @todo Does it work when the request size is greater than DEPTSIZ
-+ * transfer size
-+ *
-+ */
-+
-+#include "dwc_otg_pcd.h"
-+
-+#ifdef DWC_UTE_CFI
-+#include "dwc_otg_cfi.h"
-+
-+extern int init_cfi(cfiobject_t * cfiobj);
-+#endif
-+
-+/**
-+ * Choose endpoint from ep arrays using usb_ep structure.
-+ */
-+static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
-+{
-+ int i;
-+ if (pcd->ep0.priv == handle) {
-+ return &pcd->ep0;
-+ }
-+ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
-+ if (pcd->in_ep[i].priv == handle)
-+ return &pcd->in_ep[i];
-+ if (pcd->out_ep[i].priv == handle)
-+ return &pcd->out_ep[i];
-+ }
-+
-+ return NULL;
-+}
-+
-+/**
-+ * This function completes a request. It call's the request call back.
-+ */
-+void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req,
-+ int32_t status)
-+{
-+ unsigned stopped = ep->stopped;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req);
-+ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
-+
-+ /* don't modify queue heads during completion callback */
-+ ep->stopped = 1;
-+ /* spin_unlock/spin_lock now done in fops->complete() */
-+ ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status,
-+ req->actual);
-+
-+ if (ep->pcd->request_pending > 0) {
-+ --ep->pcd->request_pending;
-+ }
-+
-+ ep->stopped = stopped;
-+ DWC_FREE(req);
-+}
-+
-+/**
-+ * This function terminates all the requsts in the EP request queue.
-+ */
-+void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_otg_pcd_request_t *req;
-+
-+ ep->stopped = 1;
-+
-+ /* called with irqs blocked?? */
-+ while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN);
-+ }
-+}
-+
-+void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
-+ const struct dwc_otg_pcd_function_ops *fops)
-+{
-+ pcd->fops = fops;
-+}
-+
-+/**
-+ * PCD Callback function for initializing the PCD when switching to
-+ * device mode.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_start_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ /*
-+ * Initialized the Core for Device mode.
-+ */
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dwc_otg_core_dev_init(core_if);
-+ /* Set core_if's lock pointer to the pcd->lock */
-+ core_if->lock = pcd->lock;
-+ }
-+ return 1;
-+}
-+
-+/** CFI-specific buffer allocation function for EP */
-+#ifdef DWC_UTE_CFI
-+uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
-+ size_t buflen, int flags)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ ep = get_ep_from_handle(pcd, pep);
-+ if (!ep) {
-+ DWC_WARN("bad ep\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen,
-+ flags);
-+}
-+#else
-+uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
-+ size_t buflen, int flags);
-+#endif
-+
-+/**
-+ * PCD Callback function for notifying the PCD when resuming from
-+ * suspend.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_resume_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
-+
-+ if (pcd->fops->resume) {
-+ pcd->fops->resume(pcd);
-+ }
-+
-+ /* Stop the SRP timeout timer. */
-+ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS)
-+ || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
-+ if (GET_CORE_IF(pcd)->srp_timer_started) {
-+ GET_CORE_IF(pcd)->srp_timer_started = 0;
-+ DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer);
-+ }
-+ }
-+ return 1;
-+}
-+
-+/**
-+ * PCD Callback function for notifying the PCD device is suspended.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_suspend_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
-+
-+ if (pcd->fops->suspend) {
-+ DWC_SPINUNLOCK(pcd->lock);
-+ pcd->fops->suspend(pcd);
-+ DWC_SPINLOCK(pcd->lock);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * PCD Callback function for stopping the PCD when switching to Host
-+ * mode.
-+ *
-+ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
-+ */
-+static int32_t dwc_otg_pcd_stop_cb(void *p)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
-+ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd);
-+
-+ dwc_otg_pcd_stop(pcd);
-+ return 1;
-+}
-+
-+/**
-+ * PCD Callback structure for handling mode switching.
-+ */
-+static dwc_otg_cil_callbacks_t pcd_callbacks = {
-+ .start = dwc_otg_pcd_start_cb,
-+ .stop = dwc_otg_pcd_stop_cb,
-+ .suspend = dwc_otg_pcd_suspend_cb,
-+ .resume_wakeup = dwc_otg_pcd_resume_cb,
-+ .p = 0, /* Set at registration */
-+};
-+
-+/**
-+ * This function allocates a DMA Descriptor chain for the Endpoint
-+ * buffer to be used for a transfer to/from the specified endpoint.
-+ */
-+dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(struct device *dev,
-+ dwc_dma_t * dma_desc_addr,
-+ uint32_t count)
-+{
-+ return DWC_DMA_ALLOC_ATOMIC(dev, count * sizeof(dwc_otg_dev_dma_desc_t),
-+ dma_desc_addr);
-+}
-+
-+/**
-+ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
-+ */
-+void dwc_otg_ep_free_desc_chain(struct device *dev,
-+ dwc_otg_dev_dma_desc_t * desc_addr,
-+ uint32_t dma_desc_addr, uint32_t count)
-+{
-+ DWC_DMA_FREE(dev, count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr,
-+ dma_desc_addr);
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * dwc_ep)
-+{
-+
-+ dsts_data_t dsts = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ volatile uint32_t *addr;
-+ int i, j;
-+ uint32_t len;
-+
-+ if (dwc_ep->is_in)
-+ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
-+ else
-+ dwc_ep->desc_cnt =
-+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
-+ dwc_ep->bInterval;
-+
-+ /** Allocate descriptors for double buffering */
-+ dwc_ep->iso_desc_addr =
-+ dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,
-+ dwc_ep->desc_cnt * 2);
-+ if (dwc_ep->desc_addr) {
-+ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
-+ return;
-+ }
-+
-+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ /** ISO OUT EP */
-+ if (dwc_ep->is_in == 0) {
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
-+ dma_addr_t dma_ad;
-+ uint32_t data_per_desc;
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[dwc_ep->num];
-+ int offset;
-+
-+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma));
-+
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr0;
-+
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ sts.b_iso_out.rxsts = 0;
-+ sts.b_iso_out.l = 0;
-+ sts.b_iso_out.sp = 0;
-+ sts.b_iso_out.ioc = 0;
-+ sts.b_iso_out.pid = 0;
-+ sts.b_iso_out.framenum = 0;
-+
-+ offset = 0;
-+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
-+ i += dwc_ep->pkt_per_frm) {
-+
-+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
-+ uint32_t len = (j + 1) * dwc_ep->maxpacket;
-+ if (len > dwc_ep->data_per_frame)
-+ data_per_desc =
-+ dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket;
-+ else
-+ data_per_desc = dwc_ep->maxpacket;
-+ len = data_per_desc % 4;
-+ if (len)
-+ data_per_desc += 4 - len;
-+
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ offset += data_per_desc;
-+ dma_desc++;
-+ dma_ad += data_per_desc;
-+ }
-+ }
-+
-+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
-+ uint32_t len = (j + 1) * dwc_ep->maxpacket;
-+ if (len > dwc_ep->data_per_frame)
-+ data_per_desc =
-+ dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket;
-+ else
-+ data_per_desc = dwc_ep->maxpacket;
-+ len = data_per_desc % 4;
-+ if (len)
-+ data_per_desc += 4 - len;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ offset += data_per_desc;
-+ dma_desc++;
-+ dma_ad += data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ len = (j + 1) * dwc_ep->maxpacket;
-+ if (len > dwc_ep->data_per_frame)
-+ data_per_desc =
-+ dwc_ep->data_per_frame - j * dwc_ep->maxpacket;
-+ else
-+ data_per_desc = dwc_ep->maxpacket;
-+ len = data_per_desc % 4;
-+ if (len)
-+ data_per_desc += 4 - len;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+ dma_desc++;
-+
-+ /** Buffer 1 descriptors setup */
-+ sts.b_iso_out.ioc = 0;
-+ dma_ad = dwc_ep->dma_addr1;
-+
-+ offset = 0;
-+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
-+ i += dwc_ep->pkt_per_frm) {
-+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
-+ uint32_t len = (j + 1) * dwc_ep->maxpacket;
-+ if (len > dwc_ep->data_per_frame)
-+ data_per_desc =
-+ dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket;
-+ else
-+ data_per_desc = dwc_ep->maxpacket;
-+ len = data_per_desc % 4;
-+ if (len)
-+ data_per_desc += 4 - len;
-+
-+ data_per_desc =
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ offset += data_per_desc;
-+ dma_desc++;
-+ dma_ad += data_per_desc;
-+ }
-+ }
-+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ offset += data_per_desc;
-+ dma_desc++;
-+ dma_ad += data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ sts.b_iso_out.l = 1;
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ dwc_ep->next_frame = 0;
-+
-+ /** Write dma_ad into DOEPDMA register */
-+ DWC_WRITE_REG32(&(out_regs->doepdma),
-+ (uint32_t) dwc_ep->iso_dma_desc_addr);
-+
-+ }
-+ /** ISO IN EP */
-+ else {
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
-+ dma_addr_t dma_ad;
-+ dwc_otg_dev_in_ep_regs_t *in_regs =
-+ core_if->dev_if->in_ep_regs[dwc_ep->num];
-+ unsigned int frmnumber;
-+ fifosize_data_t txfifosize, rxfifosize;
-+
-+ txfifosize.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->
-+ dtxfsts);
-+ rxfifosize.d32 =
-+ DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
-+
-+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+
-+ dma_ad = dwc_ep->dma_addr0;
-+
-+ dsts.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ sts.b_iso_in.txsts = 0;
-+ sts.b_iso_in.sp =
-+ (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0;
-+ sts.b_iso_in.ioc = 0;
-+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-+
-+ frmnumber = dwc_ep->next_frame;
-+
-+ sts.b_iso_in.framenum = frmnumber;
-+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-+ sts.b_iso_in.l = 0;
-+
-+ /** Buffer 0 descriptors setup */
-+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+ dma_desc++;
-+
-+ dma_ad += dwc_ep->data_per_frame;
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+ }
-+
-+ sts.b_iso_in.ioc = 1;
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+ ++dma_desc;
-+
-+ /** Buffer 1 descriptors setup */
-+ sts.b_iso_in.ioc = 0;
-+ dma_ad = dwc_ep->dma_addr1;
-+
-+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
-+ i += dwc_ep->pkt_per_frm) {
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+ dma_desc++;
-+
-+ dma_ad += dwc_ep->data_per_frame;
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+
-+ sts.b_iso_in.ioc = 0;
-+ }
-+ sts.b_iso_in.ioc = 1;
-+ sts.b_iso_in.l = 1;
-+
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
-+
-+ /** Write dma_ad into diepdma register */
-+ DWC_WRITE_REG32(&(in_regs->diepdma),
-+ (uint32_t) dwc_ep->iso_dma_desc_addr);
-+ }
-+ /** Enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.usbactep = 1;
-+ depctl.b.cnak = 1;
-+
-+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
-+ depctl.d32 = DWC_READ_REG32(addr);
-+}
-+
-+/**
-+ * This function initializes a descriptor chain for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl = {.d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if (ep->is_in) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) {
-+ return;
-+ } else {
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+
-+ ep->xfer_len =
-+ ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
-+ ep->pkt_cnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
-+ ep->xfer_count = 0;
-+ ep->xfer_buff =
-+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->dma_addr =
-+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+
-+ if (ep->is_in) {
-+ /* Program the transfer size and packet count
-+ * as follows: xfersize = N * maxpacket +
-+ * short_packet pktcnt = N + (short_packet
-+ * exist ? 1 : 0)
-+ */
-+ deptsiz.b.mc = ep->pkt_per_frm;
-+ deptsiz.b.xfersize = ep->xfer_len;
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ dieptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ DWC_WRITE_REG32(&
-+ (core_if->dev_if->in_ep_regs[ep->num]->
-+ diepdma), (uint32_t) ep->dma_addr);
-+
-+ } else {
-+ deptsiz.b.pktcnt =
-+ (ep->xfer_len + (ep->maxpacket - 1)) /
-+ ep->maxpacket;
-+ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
-+
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
-+ doeptsiz, deptsiz.d32);
-+
-+ /* Write the DMA register */
-+ DWC_WRITE_REG32(&
-+ (core_if->dev_if->out_ep_regs[ep->num]->
-+ doepdma), (uint32_t) ep->dma_addr);
-+
-+ }
-+ /** Enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
-+ }
-+}
-+
-+/**
-+ * This function does the setup for a data transfer for an EP and
-+ * starts the transfer. For an IN transfer, the packets will be
-+ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
-+ * the packets are unloaded from the Rx FIFO in the ISR.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * ep)
-+{
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable) {
-+ if (ep->is_in) {
-+ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
-+ } else {
-+ ep->desc_cnt = ep->pkt_cnt;
-+ }
-+ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
-+ } else {
-+ if (core_if->pti_enh_enable) {
-+ dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
-+ } else {
-+ ep->cur_pkt_addr =
-+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->
-+ xfer_buff0;
-+ ep->cur_pkt_dma_addr =
-+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->
-+ dma_addr0;
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-+ }
-+ }
-+ } else {
-+ ep->cur_pkt_addr =
-+ (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
-+ ep->cur_pkt_dma_addr =
-+ (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
-+ }
-+}
-+
-+/**
-+ * This function stops transfer for an EP and
-+ * resets the ep's variables.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ */
-+
-+void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ depctl_data_t depctl = {.d32 = 0 };
-+ volatile uint32_t *addr;
-+
-+ if (ep->is_in == 1) {
-+ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
-+ } else {
-+ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
-+ }
-+
-+ /* disable the ep */
-+ depctl.d32 = DWC_READ_REG32(addr);
-+
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+
-+ DWC_WRITE_REG32(addr, depctl.d32);
-+
-+ if (core_if->dma_desc_enable &&
-+ ep->iso_desc_addr && ep->iso_dma_desc_addr) {
-+ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,
-+ ep->iso_dma_desc_addr,
-+ ep->desc_cnt * 2);
-+ }
-+
-+ /* reset varibales */
-+ ep->dma_addr0 = 0;
-+ ep->dma_addr1 = 0;
-+ ep->xfer_buff0 = 0;
-+ ep->xfer_buff1 = 0;
-+ ep->data_per_frame = 0;
-+ ep->data_pattern_frame = 0;
-+ ep->sync_frame = 0;
-+ ep->buf_proc_intrvl = 0;
-+ ep->bInterval = 0;
-+ ep->proc_buf_num = 0;
-+ ep->pkt_per_frm = 0;
-+ ep->pkt_per_frm = 0;
-+ ep->desc_cnt = 0;
-+ ep->iso_desc_addr = 0;
-+ ep->iso_dma_desc_addr = 0;
-+}
-+
-+int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0,
-+ dwc_dma_t dma1, int sync_frame, int dp_frame,
-+ int data_per_frame, int start_frame,
-+ int buf_proc_intrvl, void *req_handle,
-+ int atomic_alloc)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_irqflags_t flags = 0;
-+ dwc_ep_t *dwc_ep;
-+ int32_t frm_data;
-+ dsts_data_t dsts;
-+ dwc_otg_core_if_t *core_if;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+
-+ if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("bad ep\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+ core_if = GET_CORE_IF(pcd);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if (ep->iso_req_handle) {
-+ DWC_WARN("ISO request in progress\n");
-+ }
-+
-+ dwc_ep->dma_addr0 = dma0;
-+ dwc_ep->dma_addr1 = dma1;
-+
-+ dwc_ep->xfer_buff0 = buf0;
-+ dwc_ep->xfer_buff1 = buf1;
-+
-+ dwc_ep->data_per_frame = data_per_frame;
-+
-+ /** @todo - pattern data support is to be implemented in the future */
-+ dwc_ep->data_pattern_frame = dp_frame;
-+ dwc_ep->sync_frame = sync_frame;
-+
-+ dwc_ep->buf_proc_intrvl = buf_proc_intrvl;
-+
-+ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
-+
-+ dwc_ep->proc_buf_num = 0;
-+
-+ dwc_ep->pkt_per_frm = 0;
-+ frm_data = ep->dwc_ep.data_per_frame;
-+ while (frm_data > 0) {
-+ dwc_ep->pkt_per_frm++;
-+ frm_data -= ep->dwc_ep.maxpacket;
-+ }
-+
-+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ if (start_frame == -1) {
-+ dwc_ep->next_frame = dsts.b.soffn + 1;
-+ if (dwc_ep->bInterval != 1) {
-+ dwc_ep->next_frame =
-+ dwc_ep->next_frame + (dwc_ep->bInterval - 1 -
-+ dwc_ep->next_frame %
-+ dwc_ep->bInterval);
-+ }
-+ } else {
-+ dwc_ep->next_frame = start_frame;
-+ }
-+
-+ if (!core_if->pti_enh_enable) {
-+ dwc_ep->pkt_cnt =
-+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
-+ dwc_ep->bInterval;
-+ } else {
-+ dwc_ep->pkt_cnt =
-+ (dwc_ep->data_per_frame *
-+ (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
-+ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
-+ }
-+
-+ if (core_if->dma_desc_enable) {
-+ dwc_ep->desc_cnt =
-+ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
-+ dwc_ep->bInterval;
-+ }
-+
-+ if (atomic_alloc) {
-+ dwc_ep->pkt_info =
-+ DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
-+ } else {
-+ dwc_ep->pkt_info =
-+ DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
-+ }
-+ if (!dwc_ep->pkt_info) {
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ if (core_if->pti_enh_enable) {
-+ dwc_memset(dwc_ep->pkt_info, 0,
-+ sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
-+ }
-+
-+ dwc_ep->cur_pkt = 0;
-+ ep->iso_req_handle = req_handle;
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
-+ return 0;
-+}
-+
-+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle)
-+{
-+ dwc_irqflags_t flags = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+ if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("bad ep\n");
-+ return -DWC_E_INVALID;
-+ }
-+ dwc_ep = &ep->dwc_ep;
-+
-+ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
-+
-+ DWC_FREE(dwc_ep->pkt_info);
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+ if (ep->iso_req_handle != req_handle) {
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+ ep->iso_req_handle = 0;
-+ return 0;
-+}
-+
-+/**
-+ * This function is used for perodical data exchnage between PCD and gadget drivers.
-+ * for Isochronous EPs
-+ *
-+ * - Every time a sync period completes this function is called to
-+ * perform data exchange between PCD and gadget
-+ */
-+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
-+ void *req_handle)
-+{
-+ int i;
-+ dwc_ep_t *dwc_ep;
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ DWC_SPINUNLOCK(ep->pcd->lock);
-+ pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle,
-+ dwc_ep->proc_buf_num ^ 0x1);
-+ DWC_SPINLOCK(ep->pcd->lock);
-+
-+ for (i = 0; i < dwc_ep->pkt_cnt; ++i) {
-+ dwc_ep->pkt_info[i].status = 0;
-+ dwc_ep->pkt_info[i].offset = 0;
-+ dwc_ep->pkt_info[i].length = 0;
-+ }
-+}
-+
-+int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *iso_req_handle)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+ if (!ep->desc || ep->dwc_ep.num == 0) {
-+ DWC_WARN("bad ep\n");
-+ return -DWC_E_INVALID;
-+ }
-+ dwc_ep = &ep->dwc_ep;
-+
-+ return dwc_ep->pkt_cnt;
-+}
-+
-+void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *iso_req_handle, int packet,
-+ int *status, int *actual, int *offset)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+ if (!ep)
-+ DWC_WARN("bad ep\n");
-+
-+ dwc_ep = &ep->dwc_ep;
-+
-+ *status = dwc_ep->pkt_info[packet].status;
-+ *actual = dwc_ep->pkt_info[packet].length;
-+ *offset = dwc_ep->pkt_info[packet].offset;
-+}
-+
-+#endif /* DWC_EN_ISOC */
-+
-+static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep,
-+ uint32_t is_in, uint32_t ep_num)
-+{
-+ /* Init EP structure */
-+ pcd_ep->desc = 0;
-+ pcd_ep->pcd = pcd;
-+ pcd_ep->stopped = 1;
-+ pcd_ep->queue_sof = 0;
-+
-+ /* Init DWC ep structure */
-+ pcd_ep->dwc_ep.is_in = is_in;
-+ pcd_ep->dwc_ep.num = ep_num;
-+ pcd_ep->dwc_ep.active = 0;
-+ pcd_ep->dwc_ep.tx_fifo_num = 0;
-+ /* Control until ep is actvated */
-+ pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+ pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
-+ pcd_ep->dwc_ep.dma_addr = 0;
-+ pcd_ep->dwc_ep.start_xfer_buff = 0;
-+ pcd_ep->dwc_ep.xfer_buff = 0;
-+ pcd_ep->dwc_ep.xfer_len = 0;
-+ pcd_ep->dwc_ep.xfer_count = 0;
-+ pcd_ep->dwc_ep.sent_zlp = 0;
-+ pcd_ep->dwc_ep.total_len = 0;
-+ pcd_ep->dwc_ep.desc_addr = 0;
-+ pcd_ep->dwc_ep.dma_desc_addr = 0;
-+ DWC_CIRCLEQ_INIT(&pcd_ep->queue);
-+}
-+
-+/**
-+ * Initialize ep's
-+ */
-+static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd)
-+{
-+ int i;
-+ uint32_t hwcfg1;
-+ dwc_otg_pcd_ep_t *ep;
-+ int in_ep_cntr, out_ep_cntr;
-+ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
-+ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
-+
-+ /**
-+ * Initialize the EP0 structure.
-+ */
-+ ep = &pcd->ep0;
-+ dwc_otg_pcd_init_ep(pcd, ep, 0, 0);
-+
-+ in_ep_cntr = 0;
-+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
-+ for (i = 1; in_ep_cntr < num_in_eps; i++) {
-+ if ((hwcfg1 & 0x1) == 0) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
-+ in_ep_cntr++;
-+ /**
-+ * @todo NGS: Add direction to EP, based on contents
-+ * of HWCFG1. Need a copy of HWCFG1 in pcd structure?
-+ * sprintf(";r
-+ */
-+ dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i);
-+
-+ DWC_CIRCLEQ_INIT(&ep->queue);
-+ }
-+ hwcfg1 >>= 2;
-+ }
-+
-+ out_ep_cntr = 0;
-+ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
-+ for (i = 1; out_ep_cntr < num_out_eps; i++) {
-+ if ((hwcfg1 & 0x1) == 0) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
-+ out_ep_cntr++;
-+ /**
-+ * @todo NGS: Add direction to EP, based on contents
-+ * of HWCFG1. Need a copy of HWCFG1 in pcd structure?
-+ * sprintf(";r
-+ */
-+ dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i);
-+ DWC_CIRCLEQ_INIT(&ep->queue);
-+ }
-+ hwcfg1 >>= 2;
-+ }
-+
-+ pcd->ep0state = EP0_DISCONNECT;
-+ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
-+ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
-+}
-+
-+/**
-+ * This function is called when the SRP timer expires. The SRP should
-+ * complete within 6 seconds.
-+ */
-+static void srp_timeout(void *ptr)
-+{
-+ gotgctl_data_t gotgctl;
-+ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
-+ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
-+
-+ gotgctl.d32 = DWC_READ_REG32(addr);
-+
-+ core_if->srp_timer_started = 0;
-+
-+ if (core_if->adp_enable) {
-+ if (gotgctl.b.bsesvld == 0) {
-+ gpwrdn_data_t gpwrdn = {.d32 = 0 };
-+ DWC_PRINTF("SRP Timeout BSESSVLD = 0\n");
-+ /* Power off the core */
-+ if (core_if->power_down == 2) {
-+ gpwrdn.b.pwrdnswtch = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->gpwrdn,
-+ gpwrdn.d32, 0);
-+ }
-+
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuintsel = 1;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
-+ gpwrdn.d32);
-+ dwc_otg_adp_probe_start(core_if);
-+ } else {
-+ DWC_PRINTF("SRP Timeout BSESSVLD = 1\n");
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+ }
-+ }
-+
-+ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
-+ (core_if->core_params->i2c_enable)) {
-+ DWC_PRINTF("SRP Timeout\n");
-+
-+ if ((core_if->srp_success) && (gotgctl.b.bsesvld)) {
-+ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
-+ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
-+ }
-+
-+ /* Clear Session Request */
-+ gotgctl.d32 = 0;
-+ gotgctl.b.sesreq = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl,
-+ gotgctl.d32, 0);
-+
-+ core_if->srp_success = 0;
-+ } else {
-+ __DWC_ERROR("Device not connected/responding\n");
-+ gotgctl.b.sesreq = 0;
-+ DWC_WRITE_REG32(addr, gotgctl.d32);
-+ }
-+ } else if (gotgctl.b.sesreq) {
-+ DWC_PRINTF("SRP Timeout\n");
-+
-+ __DWC_ERROR("Device not connected/responding\n");
-+ gotgctl.b.sesreq = 0;
-+ DWC_WRITE_REG32(addr, gotgctl.d32);
-+ } else {
-+ DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32);
-+ }
-+}
-+
-+/**
-+ * Tasklet
-+ *
-+ */
-+extern void start_next_request(dwc_otg_pcd_ep_t * ep);
-+
-+static void start_xfer_tasklet_func(void *data)
-+{
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ int i;
-+ depctl_data_t diepctl;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
-+
-+ diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl);
-+
-+ if (pcd->ep0.queue_sof) {
-+ pcd->ep0.queue_sof = 0;
-+ start_next_request(&pcd->ep0);
-+ // break;
-+ }
-+
-+ for (i = 0; i < core_if->dev_if->num_in_eps; i++) {
-+ depctl_data_t diepctl;
-+ diepctl.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
-+
-+ if (pcd->in_ep[i].queue_sof) {
-+ pcd->in_ep[i].queue_sof = 0;
-+ start_next_request(&pcd->in_ep[i]);
-+ // break;
-+ }
-+ }
-+
-+ return;
-+}
-+
-+/**
-+ * This function initialized the PCD portion of the driver.
-+ *
-+ */
-+dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev)
-+{
-+ struct device *dev = &otg_dev->os_dep.platformdev->dev;
-+ dwc_otg_core_if_t *core_if = otg_dev->core_if;
-+ dwc_otg_pcd_t *pcd = NULL;
-+ dwc_otg_dev_if_t *dev_if;
-+ int i;
-+
-+ /*
-+ * Allocate PCD structure
-+ */
-+ pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t));
-+
-+ if (pcd == NULL) {
-+ return NULL;
-+ }
-+
-+#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_SPINLOCK))
-+ DWC_SPINLOCK_ALLOC_LINUX_DEBUG(pcd->lock);
-+#else
-+ pcd->lock = DWC_SPINLOCK_ALLOC();
-+#endif
-+ DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n",
-+ pcd, core_if);//GRAYG
-+ if (!pcd->lock) {
-+ DWC_ERROR("Could not allocate lock for pcd");
-+ DWC_FREE(pcd);
-+ return NULL;
-+ }
-+ /* Set core_if's lock pointer to hcd->lock */
-+ core_if->lock = pcd->lock;
-+ pcd->core_if = core_if;
-+
-+ dev_if = core_if->dev_if;
-+ dev_if->isoc_ep = NULL;
-+
-+ if (core_if->hwcfg4.b.ded_fifo_en) {
-+ DWC_PRINTF("Dedicated Tx FIFOs mode\n");
-+ } else {
-+ DWC_PRINTF("Shared Tx FIFO mode\n");
-+ }
-+
-+ /*
-+ * Initialized the Core for Device mode here if there is nod ADP support.
-+ * Otherwise it will be done later in dwc_otg_adp_start routine.
-+ */
-+ if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) {
-+ dwc_otg_core_dev_init(core_if);
-+ }
-+
-+ /*
-+ * Register the PCD Callbacks.
-+ */
-+ dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd);
-+
-+ /*
-+ * Initialize the DMA buffer for SETUP packets
-+ */
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ pcd->setup_pkt =
-+ DWC_DMA_ALLOC(dev, sizeof(*pcd->setup_pkt) * 5,
-+ &pcd->setup_pkt_dma_handle);
-+ if (pcd->setup_pkt == NULL) {
-+ DWC_FREE(pcd);
-+ return NULL;
-+ }
-+
-+ pcd->status_buf =
-+ DWC_DMA_ALLOC(dev, sizeof(uint16_t),
-+ &pcd->status_buf_dma_handle);
-+ if (pcd->status_buf == NULL) {
-+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5,
-+ pcd->setup_pkt, pcd->setup_pkt_dma_handle);
-+ DWC_FREE(pcd);
-+ return NULL;
-+ }
-+
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dev_if->setup_desc_addr[0] =
-+ dwc_otg_ep_alloc_desc_chain(dev,
-+ &dev_if->dma_setup_desc_addr[0], 1);
-+ dev_if->setup_desc_addr[1] =
-+ dwc_otg_ep_alloc_desc_chain(dev,
-+ &dev_if->dma_setup_desc_addr[1], 1);
-+ dev_if->in_desc_addr =
-+ dwc_otg_ep_alloc_desc_chain(dev,
-+ &dev_if->dma_in_desc_addr, 1);
-+ dev_if->out_desc_addr =
-+ dwc_otg_ep_alloc_desc_chain(dev,
-+ &dev_if->dma_out_desc_addr, 1);
-+ pcd->data_terminated = 0;
-+
-+ if (dev_if->setup_desc_addr[0] == 0
-+ || dev_if->setup_desc_addr[1] == 0
-+ || dev_if->in_desc_addr == 0
-+ || dev_if->out_desc_addr == 0) {
-+
-+ if (dev_if->out_desc_addr)
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->out_desc_addr,
-+ dev_if->dma_out_desc_addr, 1);
-+ if (dev_if->in_desc_addr)
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->in_desc_addr,
-+ dev_if->dma_in_desc_addr, 1);
-+ if (dev_if->setup_desc_addr[1])
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->setup_desc_addr[1],
-+ dev_if->dma_setup_desc_addr[1], 1);
-+ if (dev_if->setup_desc_addr[0])
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->setup_desc_addr[0],
-+ dev_if->dma_setup_desc_addr[0], 1);
-+
-+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5,
-+ pcd->setup_pkt,
-+ pcd->setup_pkt_dma_handle);
-+ DWC_DMA_FREE(dev, sizeof(*pcd->status_buf),
-+ pcd->status_buf,
-+ pcd->status_buf_dma_handle);
-+
-+ DWC_FREE(pcd);
-+
-+ return NULL;
-+ }
-+ }
-+ } else {
-+ pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5);
-+ if (pcd->setup_pkt == NULL) {
-+ DWC_FREE(pcd);
-+ return NULL;
-+ }
-+
-+ pcd->status_buf = DWC_ALLOC(sizeof(uint16_t));
-+ if (pcd->status_buf == NULL) {
-+ DWC_FREE(pcd->setup_pkt);
-+ DWC_FREE(pcd);
-+ return NULL;
-+ }
-+ }
-+
-+ dwc_otg_pcd_reinit(pcd);
-+
-+ /* Allocate the cfi object for the PCD */
-+#ifdef DWC_UTE_CFI
-+ pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t));
-+ if (NULL == pcd->cfi)
-+ goto fail;
-+ if (init_cfi(pcd->cfi)) {
-+ CFI_INFO("%s: Failed to init the CFI object\n", __func__);
-+ goto fail;
-+ }
-+#endif
-+
-+ /* Initialize tasklets */
-+ pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet",
-+ start_xfer_tasklet_func, pcd);
-+ pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet",
-+ do_test_mode, pcd);
-+
-+ /* Initialize SRP timer */
-+ core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if);
-+
-+ if (core_if->core_params->dev_out_nak) {
-+ /**
-+ * Initialize xfer timeout timer. Implemented for
-+ * 2.93a feature "Device DDMA OUT NAK Enhancement"
-+ */
-+ for(i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ pcd->core_if->ep_xfer_timer[i] =
-+ DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout,
-+ &pcd->core_if->ep_xfer_info[i]);
-+ }
-+ }
-+
-+ return pcd;
-+#ifdef DWC_UTE_CFI
-+fail:
-+#endif
-+ if (pcd->setup_pkt)
-+ DWC_FREE(pcd->setup_pkt);
-+ if (pcd->status_buf)
-+ DWC_FREE(pcd->status_buf);
-+#ifdef DWC_UTE_CFI
-+ if (pcd->cfi)
-+ DWC_FREE(pcd->cfi);
-+#endif
-+ if (pcd)
-+ DWC_FREE(pcd);
-+ return NULL;
-+
-+}
-+
-+/**
-+ * Remove PCD specific data
-+ */
-+void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ struct device *dev = dwc_otg_pcd_to_dev(pcd);
-+ int i;
-+
-+ if (pcd->core_if->core_params->dev_out_nak) {
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]);
-+ pcd->core_if->ep_xfer_info[i].state = 0;
-+ }
-+ }
-+
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ DWC_DMA_FREE(dev, sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt,
-+ pcd->setup_pkt_dma_handle);
-+ DWC_DMA_FREE(dev, sizeof(uint16_t), pcd->status_buf,
-+ pcd->status_buf_dma_handle);
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->setup_desc_addr[0],
-+ dev_if->dma_setup_desc_addr
-+ [0], 1);
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->setup_desc_addr[1],
-+ dev_if->dma_setup_desc_addr
-+ [1], 1);
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->in_desc_addr,
-+ dev_if->dma_in_desc_addr, 1);
-+ dwc_otg_ep_free_desc_chain(dev,
-+ dev_if->out_desc_addr,
-+ dev_if->dma_out_desc_addr,
-+ 1);
-+ }
-+ } else {
-+ DWC_FREE(pcd->setup_pkt);
-+ DWC_FREE(pcd->status_buf);
-+ }
-+ DWC_SPINLOCK_FREE(pcd->lock);
-+ /* Set core_if's lock pointer to NULL */
-+ pcd->core_if->lock = NULL;
-+
-+ DWC_TASK_FREE(pcd->start_xfer_tasklet);
-+ DWC_TASK_FREE(pcd->test_mode_tasklet);
-+ if (pcd->core_if->core_params->dev_out_nak) {
-+ for (i = 0; i < MAX_EPS_CHANNELS; i++) {
-+ if (pcd->core_if->ep_xfer_timer[i]) {
-+ DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]);
-+ }
-+ }
-+ }
-+
-+/* Release the CFI object's dynamic memory */
-+#ifdef DWC_UTE_CFI
-+ if (pcd->cfi->ops.release) {
-+ pcd->cfi->ops.release(pcd->cfi);
-+ }
-+#endif
-+
-+ DWC_FREE(pcd);
-+}
-+
-+/**
-+ * Returns whether registered pcd is dual speed or not
-+ */
-+uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) ||
-+ ((core_if->hwcfg2.b.hs_phy_type == 2) &&
-+ (core_if->hwcfg2.b.fs_phy_type == 1) &&
-+ (core_if->core_params->ulpi_fs_ls))) {
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Returns whether registered pcd is OTG capable or not
-+ */
-+uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ gusbcfg_data_t usbcfg = {.d32 = 0 };
-+
-+ usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
-+ if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) {
-+ return 0;
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function assigns periodic Tx FIFO to an periodic EP
-+ * in shared Tx FIFO mode
-+ */
-+static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t TxMsk = 1;
-+ int i;
-+
-+ for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) {
-+ if ((TxMsk & core_if->tx_msk) == 0) {
-+ core_if->tx_msk |= TxMsk;
-+ return i + 1;
-+ }
-+ TxMsk <<= 1;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * This function assigns periodic Tx FIFO to an periodic EP
-+ * in shared Tx FIFO mode
-+ */
-+static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if)
-+{
-+ uint32_t PerTxMsk = 1;
-+ int i;
-+ for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) {
-+ if ((PerTxMsk & core_if->p_tx_msk) == 0) {
-+ core_if->p_tx_msk |= PerTxMsk;
-+ return i + 1;
-+ }
-+ PerTxMsk <<= 1;
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * This function releases periodic Tx FIFO
-+ * in shared Tx FIFO mode
-+ */
-+static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if,
-+ uint32_t fifo_num)
-+{
-+ core_if->p_tx_msk =
-+ (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
-+}
-+
-+/**
-+ * This function releases periodic Tx FIFO
-+ * in shared Tx FIFO mode
-+ */
-+static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num)
-+{
-+ core_if->tx_msk =
-+ (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
-+}
-+
-+/**
-+ * This function is being called from gadget
-+ * to enable PCD endpoint.
-+ */
-+int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
-+ const uint8_t * ep_desc, void *usb_ep)
-+{
-+ int num, dir;
-+ dwc_otg_pcd_ep_t *ep = NULL;
-+ const usb_endpoint_descriptor_t *desc;
-+ dwc_irqflags_t flags;
-+ fifosize_data_t dptxfsiz = {.d32 = 0 };
-+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
-+ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
-+ int retval = 0;
-+ int i, epcount;
-+ struct device *dev = dwc_otg_pcd_to_dev(pcd);
-+
-+ desc = (const usb_endpoint_descriptor_t *)ep_desc;
-+
-+ if (!desc) {
-+ pcd->ep0.priv = usb_ep;
-+ ep = &pcd->ep0;
-+ retval = -DWC_E_INVALID;
-+ goto out;
-+ }
-+
-+ num = UE_GET_ADDR(desc->bEndpointAddress);
-+ dir = UE_GET_DIR(desc->bEndpointAddress);
-+
-+ if (!desc->wMaxPacketSize) {
-+ DWC_WARN("bad maxpacketsize\n");
-+ retval = -DWC_E_INVALID;
-+ goto out;
-+ }
-+
-+ if (dir == UE_DIR_IN) {
-+ epcount = pcd->core_if->dev_if->num_in_eps;
-+ for (i = 0; i < epcount; i++) {
-+ if (num == pcd->in_ep[i].dwc_ep.num) {
-+ ep = &pcd->in_ep[i];
-+ break;
-+ }
-+ }
-+ } else {
-+ epcount = pcd->core_if->dev_if->num_out_eps;
-+ for (i = 0; i < epcount; i++) {
-+ if (num == pcd->out_ep[i].dwc_ep.num) {
-+ ep = &pcd->out_ep[i];
-+ break;
-+ }
-+ }
-+ }
-+
-+ if (!ep) {
-+ DWC_WARN("bad address\n");
-+ retval = -DWC_E_INVALID;
-+ goto out;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+
-+ ep->desc = desc;
-+ ep->priv = usb_ep;
-+
-+ /*
-+ * Activate the EP
-+ */
-+ ep->stopped = 0;
-+
-+ ep->dwc_ep.is_in = (dir == UE_DIR_IN);
-+ ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize);
-+
-+ ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE;
-+
-+ if (ep->dwc_ep.is_in) {
-+ if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
-+ ep->dwc_ep.tx_fifo_num = 0;
-+
-+ if (ep->dwc_ep.type == UE_ISOCHRONOUS) {
-+ /*
-+ * if ISOC EP then assign a Periodic Tx FIFO.
-+ */
-+ ep->dwc_ep.tx_fifo_num =
-+ assign_perio_tx_fifo(GET_CORE_IF(pcd));
-+ }
-+ } else {
-+ /*
-+ * if Dedicated FIFOs mode is on then assign a Tx FIFO.
-+ */
-+ ep->dwc_ep.tx_fifo_num =
-+ assign_tx_fifo(GET_CORE_IF(pcd));
-+ }
-+
-+ /* Calculating EP info controller base address */
-+ if (ep->dwc_ep.tx_fifo_num
-+ && GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
-+ gdfifocfg.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->
-+ core_global_regs->gdfifocfg);
-+ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
-+ dptxfsiz.d32 =
-+ (DWC_READ_REG32
-+ (&GET_CORE_IF(pcd)->core_global_regs->
-+ dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16);
-+ gdfifocfg.b.epinfobase =
-+ gdfifocfgbase.d32 + dptxfsiz.d32;
-+ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
-+ core_global_regs->gdfifocfg,
-+ gdfifocfg.d32);
-+ }
-+ }
-+ }
-+ /* Set initial data PID. */
-+ if (ep->dwc_ep.type == UE_BULK) {
-+ ep->dwc_ep.data_pid_start = 0;
-+ }
-+
-+ /* Alloc DMA Descriptors */
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+#ifndef DWC_UTE_PER_IO
-+ if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
-+#endif
-+ ep->dwc_ep.desc_addr =
-+ dwc_otg_ep_alloc_desc_chain(dev,
-+ &ep->dwc_ep.dma_desc_addr,
-+ MAX_DMA_DESC_CNT);
-+ if (!ep->dwc_ep.desc_addr) {
-+ DWC_WARN("%s, can't allocate DMA descriptor\n",
-+ __func__);
-+ retval = -DWC_E_SHUTDOWN;
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ goto out;
-+ }
-+#ifndef DWC_UTE_PER_IO
-+ }
-+#endif
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n",
-+ (ep->dwc_ep.is_in ? "IN" : "OUT"),
-+ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
-+#ifdef DWC_UTE_PER_IO
-+ ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1);
-+#endif
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1);
-+ ep->dwc_ep.frame_num = 0xFFFFFFFF;
-+ }
-+
-+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+
-+#ifdef DWC_UTE_CFI
-+ if (pcd->cfi->ops.ep_enable) {
-+ pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep);
-+ }
-+#endif
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+out:
-+ return retval;
-+}
-+
-+/**
-+ * This function is being called from gadget
-+ * to disable PCD endpoint.
-+ */
-+int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_irqflags_t flags;
-+ dwc_otg_dev_dma_desc_t *desc_addr;
-+ dwc_dma_t dma_desc_addr;
-+ gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
-+ gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
-+ fifosize_data_t dptxfsiz = {.d32 = 0 };
-+ struct device *dev = dwc_otg_pcd_to_dev(pcd);
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+
-+ if (!ep || !ep->desc) {
-+ DWC_DEBUGPL(DBG_PCD, "bad ep address\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+
-+ dwc_otg_request_nuke(ep);
-+
-+ dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ if (pcd->core_if->core_params->dev_out_nak) {
-+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]);
-+ pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0;
-+ }
-+ ep->desc = NULL;
-+ ep->stopped = 1;
-+
-+ gdfifocfg.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg);
-+ gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
-+
-+ if (ep->dwc_ep.is_in) {
-+ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
-+ /* Flush the Tx FIFO */
-+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd),
-+ ep->dwc_ep.tx_fifo_num);
-+ }
-+ release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
-+ release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
-+ if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
-+ /* Decreasing EPinfo Base Addr */
-+ dptxfsiz.d32 =
-+ (DWC_READ_REG32
-+ (&GET_CORE_IF(pcd)->
-+ core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16);
-+ gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32;
-+ if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg,
-+ gdfifocfg.d32);
-+ }
-+ }
-+ }
-+
-+ /* Free DMA Descriptors */
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
-+ desc_addr = ep->dwc_ep.desc_addr;
-+ dma_desc_addr = ep->dwc_ep.dma_desc_addr;
-+
-+ /* Cannot call dma_free_coherent() with IRQs disabled */
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ dwc_otg_ep_free_desc_chain(dev, desc_addr, dma_desc_addr,
-+ MAX_DMA_DESC_CNT);
-+
-+ goto out_unlocked;
-+ }
-+ }
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+out_unlocked:
-+ DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num,
-+ ep->dwc_ep.is_in ? "IN" : "OUT");
-+ return 0;
-+
-+}
-+
-+/******************************************************************************/
-+#ifdef DWC_UTE_PER_IO
-+
-+/**
-+ * Free the request and its extended parts
-+ *
-+ */
-+void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req)
-+{
-+ DWC_FREE(req->ext_req.per_io_frame_descs);
-+ DWC_FREE(req);
-+}
-+
-+/**
-+ * Start the next request in the endpoint's queue.
-+ *
-+ */
-+int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd,
-+ dwc_otg_pcd_ep_t * ep)
-+{
-+ int i;
-+ dwc_otg_pcd_request_t *req = NULL;
-+ dwc_ep_t *dwcep = NULL;
-+ struct dwc_iso_xreq_port *ereq = NULL;
-+ struct dwc_iso_pkt_desc_port *ddesc_iso;
-+ uint16_t nat;
-+ depctl_data_t diepctl;
-+
-+ dwcep = &ep->dwc_ep;
-+
-+ if (dwcep->xiso_active_xfers > 0) {
-+#if 0 //Disable this to decrease s/w overhead that is crucial for Isoc transfers
-+ DWC_WARN("There are currently active transfers for EP%d \
-+ (active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers,
-+ dwcep->xiso_queued_xfers);
-+#endif
-+ return 0;
-+ }
-+
-+ nat = UGETW(ep->desc->wMaxPacketSize);
-+ nat = (nat >> 11) & 0x03;
-+
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ ereq = &req->ext_req;
-+ ep->stopped = 0;
-+
-+ /* Get the frame number */
-+ dwcep->xiso_frame_num =
-+ dwc_otg_get_frame_number(GET_CORE_IF(pcd));
-+ DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num);
-+
-+ ddesc_iso = ereq->per_io_frame_descs;
-+
-+ if (dwcep->is_in) {
-+ /* Setup DMA Descriptor chain for IN Isoc request */
-+ for (i = 0; i < ereq->pio_pkt_count; i++) {
-+ //if ((i % (nat + 1)) == 0)
-+ if ( i > 0 )
-+ dwcep->xiso_frame_num =
-+ (dwcep->xiso_bInterval +
-+ dwcep->xiso_frame_num) & 0x3FFF;
-+ dwcep->desc_addr[i].buf =
-+ req->dma + ddesc_iso[i].offset;
-+ dwcep->desc_addr[i].status.b_iso_in.txbytes =
-+ ddesc_iso[i].length;
-+ dwcep->desc_addr[i].status.b_iso_in.framenum =
-+ dwcep->xiso_frame_num;
-+ dwcep->desc_addr[i].status.b_iso_in.bs =
-+ BS_HOST_READY;
-+ dwcep->desc_addr[i].status.b_iso_in.txsts = 0;
-+ dwcep->desc_addr[i].status.b_iso_in.sp =
-+ (ddesc_iso[i].length %
-+ dwcep->maxpacket) ? 1 : 0;
-+ dwcep->desc_addr[i].status.b_iso_in.ioc = 0;
-+ dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1;
-+ dwcep->desc_addr[i].status.b_iso_in.l = 0;
-+
-+ /* Process the last descriptor */
-+ if (i == ereq->pio_pkt_count - 1) {
-+ dwcep->desc_addr[i].status.b_iso_in.ioc = 1;
-+ dwcep->desc_addr[i].status.b_iso_in.l = 1;
-+ }
-+ }
-+
-+ /* Setup and start the transfer for this endpoint */
-+ dwcep->xiso_active_xfers++;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if->
-+ in_ep_regs[dwcep->num]->diepdma,
-+ dwcep->dma_desc_addr);
-+ diepctl.d32 = 0;
-+ diepctl.b.epena = 1;
-+ diepctl.b.cnak = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if->
-+ in_ep_regs[dwcep->num]->diepctl, 0,
-+ diepctl.d32);
-+ } else {
-+ /* Setup DMA Descriptor chain for OUT Isoc request */
-+ for (i = 0; i < ereq->pio_pkt_count; i++) {
-+ //if ((i % (nat + 1)) == 0)
-+ dwcep->xiso_frame_num = (dwcep->xiso_bInterval +
-+ dwcep->xiso_frame_num) & 0x3FFF;
-+ dwcep->desc_addr[i].buf =
-+ req->dma + ddesc_iso[i].offset;
-+ dwcep->desc_addr[i].status.b_iso_out.rxbytes =
-+ ddesc_iso[i].length;
-+ dwcep->desc_addr[i].status.b_iso_out.framenum =
-+ dwcep->xiso_frame_num;
-+ dwcep->desc_addr[i].status.b_iso_out.bs =
-+ BS_HOST_READY;
-+ dwcep->desc_addr[i].status.b_iso_out.rxsts = 0;
-+ dwcep->desc_addr[i].status.b_iso_out.sp =
-+ (ddesc_iso[i].length %
-+ dwcep->maxpacket) ? 1 : 0;
-+ dwcep->desc_addr[i].status.b_iso_out.ioc = 0;
-+ dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1;
-+ dwcep->desc_addr[i].status.b_iso_out.l = 0;
-+
-+ /* Process the last descriptor */
-+ if (i == ereq->pio_pkt_count - 1) {
-+ dwcep->desc_addr[i].status.b_iso_out.ioc = 1;
-+ dwcep->desc_addr[i].status.b_iso_out.l = 1;
-+ }
-+ }
-+
-+ /* Setup and start the transfer for this endpoint */
-+ dwcep->xiso_active_xfers++;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
-+ dev_if->out_ep_regs[dwcep->num]->
-+ doepdma, dwcep->dma_desc_addr);
-+ diepctl.d32 = 0;
-+ diepctl.b.epena = 1;
-+ diepctl.b.cnak = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
-+ dev_if->out_ep_regs[dwcep->num]->
-+ doepctl, 0, diepctl.d32);
-+ }
-+
-+ } else {
-+ ep->stopped = 1;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * - Remove the request from the queue
-+ */
-+void complete_xiso_ep(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_otg_pcd_request_t *req = NULL;
-+ struct dwc_iso_xreq_port *ereq = NULL;
-+ struct dwc_iso_pkt_desc_port *ddesc_iso = NULL;
-+ dwc_ep_t *dwcep = NULL;
-+ int i;
-+
-+ //DWC_DEBUG();
-+ dwcep = &ep->dwc_ep;
-+
-+ /* Get the first pending request from the queue */
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ if (!req) {
-+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
-+ return;
-+ }
-+ dwcep->xiso_active_xfers--;
-+ dwcep->xiso_queued_xfers--;
-+ /* Remove this request from the queue */
-+ DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
-+ } else {
-+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
-+ return;
-+ }
-+
-+ ep->stopped = 1;
-+ ereq = &req->ext_req;
-+ ddesc_iso = ereq->per_io_frame_descs;
-+
-+ if (dwcep->xiso_active_xfers < 0) {
-+ DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num,
-+ dwcep->xiso_active_xfers);
-+ }
-+
-+ /* Fill the Isoc descs of portable extended req from dma descriptors */
-+ for (i = 0; i < ereq->pio_pkt_count; i++) {
-+ if (dwcep->is_in) { /* IN endpoints */
-+ ddesc_iso[i].actual_length = ddesc_iso[i].length -
-+ dwcep->desc_addr[i].status.b_iso_in.txbytes;
-+ ddesc_iso[i].status =
-+ dwcep->desc_addr[i].status.b_iso_in.txsts;
-+ } else { /* OUT endpoints */
-+ ddesc_iso[i].actual_length = ddesc_iso[i].length -
-+ dwcep->desc_addr[i].status.b_iso_out.rxbytes;
-+ ddesc_iso[i].status =
-+ dwcep->desc_addr[i].status.b_iso_out.rxsts;
-+ }
-+ }
-+
-+ DWC_SPINUNLOCK(ep->pcd->lock);
-+
-+ /* Call the completion function in the non-portable logic */
-+ ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0,
-+ &req->ext_req);
-+
-+ DWC_SPINLOCK(ep->pcd->lock);
-+
-+ /* Free the request - specific freeing needed for extended request object */
-+ dwc_pcd_xiso_ereq_free(ep, req);
-+
-+ /* Start the next request */
-+ dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep);
-+
-+ return;
-+}
-+
-+/**
-+ * Create and initialize the Isoc pkt descriptors of the extended request.
-+ *
-+ */
-+static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req,
-+ void *ereq_nonport,
-+ int atomic_alloc)
-+{
-+ struct dwc_iso_xreq_port *ereq = NULL;
-+ struct dwc_iso_xreq_port *req_mapped = NULL;
-+ struct dwc_iso_pkt_desc_port *ipds = NULL; /* To be created in this function */
-+ uint32_t pkt_count;
-+ int i;
-+
-+ ereq = &req->ext_req;
-+ req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport;
-+ pkt_count = req_mapped->pio_pkt_count;
-+
-+ /* Create the isoc descs */
-+ if (atomic_alloc) {
-+ ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count);
-+ } else {
-+ ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count);
-+ }
-+
-+ if (!ipds) {
-+ DWC_ERROR("Failed to allocate isoc descriptors");
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ /* Initialize the extended request fields */
-+ ereq->per_io_frame_descs = ipds;
-+ ereq->error_count = 0;
-+ ereq->pio_alloc_pkt_count = pkt_count;
-+ ereq->pio_pkt_count = pkt_count;
-+ ereq->tr_sub_flags = req_mapped->tr_sub_flags;
-+
-+ /* Init the Isoc descriptors */
-+ for (i = 0; i < pkt_count; i++) {
-+ ipds[i].length = req_mapped->per_io_frame_descs[i].length;
-+ ipds[i].offset = req_mapped->per_io_frame_descs[i].offset;
-+ ipds[i].status = req_mapped->per_io_frame_descs[i].status; /* 0 */
-+ ipds[i].actual_length =
-+ req_mapped->per_io_frame_descs[i].actual_length;
-+ }
-+
-+ return 0;
-+}
-+
-+static void prn_ext_request(struct dwc_iso_xreq_port *ereq)
-+{
-+ struct dwc_iso_pkt_desc_port *xfd = NULL;
-+ int i;
-+
-+ DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs);
-+ DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags);
-+ DWC_DEBUG("error_count=%d", ereq->error_count);
-+ DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count);
-+ DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count);
-+ DWC_DEBUG("res=%d", ereq->res);
-+
-+ for (i = 0; i < ereq->pio_pkt_count; i++) {
-+ xfd = &ereq->per_io_frame_descs[0];
-+ DWC_DEBUG("FD #%d", i);
-+
-+ DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length);
-+ DWC_DEBUG("xfd->length=%d", xfd->length);
-+ DWC_DEBUG("xfd->offset=%d", xfd->offset);
-+ DWC_DEBUG("xfd->status=%d", xfd->status);
-+ }
-+}
-+
-+/**
-+ *
-+ */
-+int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
-+ int zero, void *req_handle, int atomic_alloc,
-+ void *ereq_nonport)
-+{
-+ dwc_otg_pcd_request_t *req = NULL;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_irqflags_t flags;
-+ int res;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+ if (!ep) {
-+ DWC_WARN("bad ep\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ /* We support this extension only for DDMA mode */
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
-+ if (!GET_CORE_IF(pcd)->dma_desc_enable)
-+ return -DWC_E_INVALID;
-+
-+ /* Create a dwc_otg_pcd_request_t object */
-+ if (atomic_alloc) {
-+ req = DWC_ALLOC_ATOMIC(sizeof(*req));
-+ } else {
-+ req = DWC_ALLOC(sizeof(*req));
-+ }
-+
-+ if (!req) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+
-+ /* Create the Isoc descs for this request which shall be the exact match
-+ * of the structure sent to us from the non-portable logic */
-+ res =
-+ dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc);
-+ if (res) {
-+ DWC_WARN("Failed to init the Isoc descriptors");
-+ DWC_FREE(req);
-+ return res;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+
-+ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
-+ req->buf = buf;
-+ req->dma = dma_buf;
-+ req->length = buflen;
-+ req->sent_zlp = zero;
-+ req->priv = req_handle;
-+
-+ //DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+ ep->dwc_ep.dma_addr = dma_buf;
-+ ep->dwc_ep.start_xfer_buff = buf;
-+ ep->dwc_ep.xfer_buff = buf;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = buflen;
-+
-+ /* Add this request to the tail */
-+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
-+ ep->dwc_ep.xiso_queued_xfers++;
-+
-+//DWC_DEBUG("CP_0");
-+//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags);
-+//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport);
-+//prn_ext_request(&req->ext_req);
-+
-+ //DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+ /* If the req->status == ASAP then check if there is any active transfer
-+ * for this endpoint. If no active transfers, then get the first entry
-+ * from the queue and start that transfer
-+ */
-+ if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) {
-+ res = dwc_otg_pcd_xiso_start_next_request(pcd, ep);
-+ if (res) {
-+ DWC_WARN("Failed to start the next Isoc transfer");
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ DWC_FREE(req);
-+ return res;
-+ }
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ return 0;
-+}
-+
-+#endif
-+/* END ifdef DWC_UTE_PER_IO ***************************************************/
-+int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
-+ int zero, void *req_handle, int atomic_alloc)
-+{
-+ struct device *dev = dwc_otg_pcd_to_dev(pcd);
-+ dwc_irqflags_t flags;
-+ dwc_otg_pcd_request_t *req;
-+ dwc_otg_pcd_ep_t *ep;
-+ uint32_t max_transfer;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
-+ DWC_WARN("bad ep\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (atomic_alloc) {
-+ req = DWC_ALLOC_ATOMIC(sizeof(*req));
-+ } else {
-+ req = DWC_ALLOC(sizeof(*req));
-+ }
-+
-+ if (!req) {
-+ return -DWC_E_NO_MEMORY;
-+ }
-+ DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
-+ if (!GET_CORE_IF(pcd)->core_params->opt) {
-+ if (ep->dwc_ep.num != 0) {
-+ DWC_ERROR("queue req %p, len %d buf %p\n",
-+ req_handle, buflen, buf);
-+ }
-+ }
-+
-+ req->buf = buf;
-+ req->dma = dma_buf;
-+ req->length = buflen;
-+ req->sent_zlp = zero;
-+ req->priv = req_handle;
-+ req->dw_align_buf = NULL;
-+ if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable
-+ && !GET_CORE_IF(pcd)->dma_desc_enable)
-+ req->dw_align_buf = DWC_DMA_ALLOC(dev, buflen,
-+ &req->dw_align_buf_dma);
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+
-+ /*
-+ * After adding request to the queue for IN ISOC wait for In Token Received
-+ * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token
-+ * Received when EP is disabled interrupt to obtain starting microframe
-+ * (odd/even) start transfer
-+ */
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (req != 0) {
-+ depctl_data_t depctl = {.d32 =
-+ DWC_READ_REG32(&pcd->core_if->dev_if->
-+ in_ep_regs[ep->dwc_ep.num]->
-+ diepctl) };
-+ ++pcd->request_pending;
-+
-+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
-+ if (ep->dwc_ep.is_in) {
-+ depctl.b.cnak = 1;
-+ DWC_WRITE_REG32(&pcd->core_if->dev_if->
-+ in_ep_regs[ep->dwc_ep.num]->
-+ diepctl, depctl.d32);
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ }
-+ return 0;
-+ }
-+
-+ /*
-+ * For EP0 IN without premature status, zlp is required?
-+ */
-+ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
-+ DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num);
-+ //_req->zero = 1;
-+ }
-+
-+ /* Start the transfer */
-+ if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) {
-+ /* EP0 Transfer? */
-+ if (ep->dwc_ep.num == 0) {
-+ switch (pcd->ep0state) {
-+ case EP0_IN_DATA_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_IN_DATA_PHASE\n",
-+ __func__);
-+ break;
-+
-+ case EP0_OUT_DATA_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_OUT_DATA_PHASE\n",
-+ __func__);
-+ if (pcd->request_config) {
-+ /* Complete STATUS PHASE */
-+ ep->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+ }
-+ break;
-+
-+ case EP0_IN_STATUS_PHASE:
-+ DWC_DEBUGPL(DBG_PCD,
-+ "%s ep0: EP0_IN_STATUS_PHASE\n",
-+ __func__);
-+ break;
-+
-+ default:
-+ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
-+ pcd->ep0state);
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ return -DWC_E_SHUTDOWN;
-+ }
-+
-+ ep->dwc_ep.dma_addr = dma_buf;
-+ ep->dwc_ep.start_xfer_buff = buf;
-+ ep->dwc_ep.xfer_buff = buf;
-+ ep->dwc_ep.xfer_len = buflen;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
-+
-+ if (zero) {
-+ if ((ep->dwc_ep.xfer_len %
-+ ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.xfer_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
-+ &ep->dwc_ep);
-+ } // non-ep0 endpoints
-+ else {
-+#ifdef DWC_UTE_CFI
-+ if (ep->dwc_ep.buff_mode != BM_STANDARD) {
-+ /* store the request length */
-+ ep->dwc_ep.cfi_req_len = buflen;
-+ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd,
-+ ep, req);
-+ } else {
-+#endif
-+ max_transfer =
-+ GET_CORE_IF(ep->pcd)->core_params->
-+ max_transfer_size;
-+
-+ /* Setup and start the Transfer */
-+ if (req->dw_align_buf){
-+ if (ep->dwc_ep.is_in)
-+ dwc_memcpy(req->dw_align_buf,
-+ buf, buflen);
-+ ep->dwc_ep.dma_addr =
-+ req->dw_align_buf_dma;
-+ ep->dwc_ep.start_xfer_buff =
-+ req->dw_align_buf;
-+ ep->dwc_ep.xfer_buff =
-+ req->dw_align_buf;
-+ } else {
-+ ep->dwc_ep.dma_addr = dma_buf;
-+ ep->dwc_ep.start_xfer_buff = buf;
-+ ep->dwc_ep.xfer_buff = buf;
-+ }
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = buflen;
-+
-+ ep->dwc_ep.maxxfer = max_transfer;
-+ if (GET_CORE_IF(pcd)->dma_desc_enable) {
-+ uint32_t out_max_xfer =
-+ DDMA_MAX_TRANSFER_SIZE -
-+ (DDMA_MAX_TRANSFER_SIZE % 4);
-+ if (ep->dwc_ep.is_in) {
-+ if (ep->dwc_ep.maxxfer >
-+ DDMA_MAX_TRANSFER_SIZE) {
-+ ep->dwc_ep.maxxfer =
-+ DDMA_MAX_TRANSFER_SIZE;
-+ }
-+ } else {
-+ if (ep->dwc_ep.maxxfer >
-+ out_max_xfer) {
-+ ep->dwc_ep.maxxfer =
-+ out_max_xfer;
-+ }
-+ }
-+ }
-+ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
-+ ep->dwc_ep.maxxfer -=
-+ (ep->dwc_ep.maxxfer %
-+ ep->dwc_ep.maxpacket);
-+ }
-+
-+ if (zero) {
-+ if ((ep->dwc_ep.total_len %
-+ ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.total_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+ }
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd),
-+ &ep->dwc_ep);
-+ }
-+ }
-+
-+ if (req != 0) {
-+ ++pcd->request_pending;
-+ DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
-+ if (ep->dwc_ep.is_in && ep->stopped
-+ && !(GET_CORE_IF(pcd)->dma_enable)) {
-+ /** @todo NGS Create a function for this. */
-+ diepmsk_data_t diepmsk = {.d32 = 0 };
-+ diepmsk.b.intktxfemp = 1;
-+ if (GET_CORE_IF(pcd)->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
-+ dev_if->dev_global_regs->diepeachintmsk
-+ [ep->dwc_ep.num], 0,
-+ diepmsk.d32);
-+ } else {
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
-+ dev_if->dev_global_regs->
-+ diepmsk, 0, diepmsk.d32);
-+ }
-+
-+ }
-+ }
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+ return 0;
-+}
-+
-+int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle)
-+{
-+ dwc_irqflags_t flags;
-+ dwc_otg_pcd_request_t *req;
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+ if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
-+ DWC_WARN("bad argument\n");
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+
-+ /* make sure it's actually queued on this endpoint */
-+ DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) {
-+ if (req->priv == (void *)req_handle) {
-+ break;
-+ }
-+ }
-+
-+ if (req->priv != (void *)req_handle) {
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) {
-+ dwc_otg_request_done(ep, req, -DWC_E_RESTART);
-+ } else {
-+ req = NULL;
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+ return req ? 0 : -DWC_E_SHUTDOWN;
-+
-+}
-+
-+/**
-+ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests
-+ *
-+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
-+ * requests. If the gadget driver clears the halt status, it will
-+ * automatically unwedge the endpoint.
-+ *
-+ * Returns zero on success, else negative DWC error code.
-+ */
-+int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_irqflags_t flags;
-+ int retval = 0;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+
-+ if ((!ep->desc && ep != &pcd->ep0) ||
-+ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
-+ ep->dwc_ep.is_in ? "IN" : "OUT");
-+ retval = -DWC_E_AGAIN;
-+ } else {
-+ /* This code needs to be reviewed */
-+ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dtxfsts_data_t txstatus;
-+ fifosize_data_t txfifosize;
-+
-+ txfifosize.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->
-+ core_global_regs->dtxfsiz[ep->dwc_ep.
-+ tx_fifo_num]);
-+ txstatus.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->
-+ dev_if->in_ep_regs[ep->dwc_ep.num]->
-+ dtxfsts);
-+
-+ if (txstatus.b.txfspcavail < txfifosize.b.depth) {
-+ DWC_WARN("%s() Data In Tx Fifo\n", __func__);
-+ retval = -DWC_E_AGAIN;
-+ } else {
-+ if (ep->dwc_ep.num == 0) {
-+ pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
-+ &ep->dwc_ep);
-+ }
-+ } else {
-+ if (ep->dwc_ep.num == 0) {
-+ pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ }
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+ return retval;
-+}
-+
-+int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_irqflags_t flags;
-+ int retval = 0;
-+
-+ ep = get_ep_from_handle(pcd, ep_handle);
-+
-+ if (!ep || (!ep->desc && ep != &pcd->ep0) ||
-+ (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
-+ DWC_WARN("%s, bad ep\n", __func__);
-+ return -DWC_E_INVALID;
-+ }
-+
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
-+ ep->dwc_ep.is_in ? "IN" : "OUT");
-+ retval = -DWC_E_AGAIN;
-+ } else if (value == 0) {
-+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ } else if (value == 1) {
-+ if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
-+ dtxfsts_data_t txstatus;
-+ fifosize_data_t txfifosize;
-+
-+ txfifosize.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->
-+ dtxfsiz[ep->dwc_ep.tx_fifo_num]);
-+ txstatus.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
-+ in_ep_regs[ep->dwc_ep.num]->dtxfsts);
-+
-+ if (txstatus.b.txfspcavail < txfifosize.b.depth) {
-+ DWC_WARN("%s() Data In Tx Fifo\n", __func__);
-+ retval = -DWC_E_AGAIN;
-+ } else {
-+ if (ep->dwc_ep.num == 0) {
-+ pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
-+ &ep->dwc_ep);
-+ }
-+ } else {
-+ if (ep->dwc_ep.num == 0) {
-+ pcd->ep0state = EP0_STALL;
-+ }
-+
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ }
-+ } else if (value == 2) {
-+ ep->dwc_ep.stall_clear_flag = 0;
-+ } else if (value == 3) {
-+ ep->dwc_ep.stall_clear_flag = 1;
-+ }
-+
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function initiates remote wakeup of the host from suspend state.
-+ */
-+void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set)
-+{
-+ dctl_data_t dctl = { 0 };
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dsts_data_t dsts;
-+
-+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+ if (!dsts.b.suspsts) {
-+ DWC_WARN("Remote wakeup while is not in suspend state\n");
-+ }
-+ /* Check if DEVICE_REMOTE_WAKEUP feature enabled */
-+ if (pcd->remote_wakeup_enable) {
-+ if (set) {
-+
-+ if (core_if->adp_enable) {
-+ gpwrdn_data_t gpwrdn;
-+
-+ dwc_otg_adp_probe_stop(core_if);
-+
-+ /* Mask SRP detected interrupt from Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.srp_det_msk = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->gpwrdn,
-+ gpwrdn.d32, 0);
-+
-+ /* Disable Power Down Logic */
-+ gpwrdn.d32 = 0;
-+ gpwrdn.b.pmuactv = 1;
-+ DWC_MODIFY_REG32(&core_if->
-+ core_global_regs->gpwrdn,
-+ gpwrdn.d32, 0);
-+
-+ /*
-+ * Initialize the Core for Device mode.
-+ */
-+ core_if->op_state = B_PERIPHERAL;
-+ dwc_otg_core_init(core_if);
-+ dwc_otg_enable_global_interrupts(core_if);
-+ cil_pcd_start(core_if);
-+
-+ dwc_otg_initiate_srp(core_if);
-+ }
-+
-+ dctl.b.rmtwkupsig = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ dctl, 0, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
-+
-+ dwc_mdelay(2);
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ dctl, dctl.d32, 0);
-+ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
-+ }
-+ } else {
-+ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
-+ }
-+}
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+/**
-+ * This function initiates remote wakeup of the host from L1 sleep state.
-+ */
-+void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set)
-+{
-+ glpmcfg_data_t lpmcfg;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+
-+ /* Check if we are in L1 state */
-+ if (!lpmcfg.b.prt_sleep_sts) {
-+ DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n");
-+ return;
-+ }
-+
-+ /* Check if host allows remote wakeup */
-+ if (!lpmcfg.b.rem_wkup_en) {
-+ DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n");
-+ return;
-+ }
-+
-+ /* Check if Resume OK */
-+ if (!lpmcfg.b.sleep_state_resumeok) {
-+ DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n");
-+ return;
-+ }
-+
-+ lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
-+ lpmcfg.b.en_utmi_sleep = 0;
-+ lpmcfg.b.hird_thres &= (~(1 << 4));
-+ DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
-+
-+ if (set) {
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dctl.b.rmtwkupsig = 1;
-+ /* Set RmtWkUpSig bit to start remote wakup signaling.
-+ * Hardware will automatically clear this bit.
-+ */
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl,
-+ 0, dctl.d32);
-+ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
-+ }
-+
-+}
-+#endif
-+
-+/**
-+ * Performs remote wakeup.
-+ */
-+void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_irqflags_t flags;
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ if (core_if->lx_state == DWC_OTG_L1) {
-+ dwc_otg_pcd_rem_wkup_from_sleep(pcd, set);
-+ } else {
-+#endif
-+ dwc_otg_pcd_rem_wkup_from_suspend(pcd, set);
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ }
-+#endif
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+ }
-+ return;
-+}
-+
-+void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dctl_data_t dctl = { 0 };
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ dctl.b.sftdiscon = 1;
-+ DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs);
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
-+ dwc_udelay(no_of_usecs);
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0);
-+
-+ } else{
-+ DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n");
-+ }
-+ return;
-+
-+}
-+
-+int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd)
-+{
-+ dsts_data_t dsts;
-+ gotgctl_data_t gotgctl;
-+
-+ /*
-+ * This function starts the Protocol if no session is in progress. If
-+ * a session is already in progress, but the device is suspended,
-+ * remote wakeup signaling is started.
-+ */
-+
-+ /* Check if valid session */
-+ gotgctl.d32 =
-+ DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
-+ if (gotgctl.b.bsesvld) {
-+ /* Check if suspend state */
-+ dsts.d32 =
-+ DWC_READ_REG32(&
-+ (GET_CORE_IF(pcd)->dev_if->
-+ dev_global_regs->dsts));
-+ if (dsts.b.suspsts) {
-+ dwc_otg_pcd_remote_wakeup(pcd, 1);
-+ }
-+ } else {
-+ dwc_otg_pcd_initiate_srp(pcd);
-+ }
-+
-+ return 0;
-+
-+}
-+
-+/**
-+ * Start the SRP timer to detect when the SRP does not complete within
-+ * 6 seconds.
-+ *
-+ * @param pcd the pcd structure.
-+ */
-+void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_irqflags_t flags;
-+ DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
-+ dwc_otg_initiate_srp(GET_CORE_IF(pcd));
-+ DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
-+}
-+
-+int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd)
-+{
-+ return dwc_otg_get_frame_number(GET_CORE_IF(pcd));
-+}
-+
-+int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd)
-+{
-+ return GET_CORE_IF(pcd)->core_params->lpm_enable;
-+}
-+
-+uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd)
-+{
-+ return pcd->b_hnp_enable;
-+}
-+
-+uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd)
-+{
-+ return pcd->a_hnp_support;
-+}
-+
-+uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd)
-+{
-+ return pcd->a_alt_hnp_support;
-+}
-+
-+int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd)
-+{
-+ return pcd->remote_wakeup_enable;
-+}
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
-@@ -0,0 +1,273 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
-+ * $Revision: #48 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+#if !defined(__DWC_PCD_H__)
-+#define __DWC_PCD_H__
-+
-+#include "dwc_otg_os_dep.h"
-+#include "usb.h"
-+#include "dwc_otg_cil.h"
-+#include "dwc_otg_pcd_if.h"
-+#include "dwc_otg_driver.h"
-+
-+struct cfiobject;
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the structures, constants, and interfaces for
-+ * the Perpherial Contoller Driver (PCD).
-+ *
-+ * The Peripheral Controller Driver (PCD) for Linux will implement the
-+ * Gadget API, so that the existing Gadget drivers can be used. For
-+ * the Mass Storage Function driver the File-backed USB Storage Gadget
-+ * (FBS) driver will be used. The FBS driver supports the
-+ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
-+ * transports.
-+ *
-+ */
-+
-+/** Invalid DMA Address */
-+#define DWC_DMA_ADDR_INVALID (~(dwc_dma_t)0)
-+
-+/** Max Transfer size for any EP */
-+#define DDMA_MAX_TRANSFER_SIZE 65535
-+
-+/**
-+ * Get the pointer to the core_if from the pcd pointer.
-+ */
-+#define GET_CORE_IF( _pcd ) (_pcd->core_if)
-+
-+/**
-+ * States of EP0.
-+ */
-+typedef enum ep0_state {
-+ EP0_DISCONNECT, /* no host */
-+ EP0_IDLE,
-+ EP0_IN_DATA_PHASE,
-+ EP0_OUT_DATA_PHASE,
-+ EP0_IN_STATUS_PHASE,
-+ EP0_OUT_STATUS_PHASE,
-+ EP0_STALL,
-+} ep0state_e;
-+
-+/** Fordward declaration.*/
-+struct dwc_otg_pcd;
-+
-+/** DWC_otg iso request structure.
-+ *
-+ */
-+typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
-+
-+#ifdef DWC_UTE_PER_IO
-+
-+/**
-+ * This shall be the exact analogy of the same type structure defined in the
-+ * usb_gadget.h. Each descriptor contains
-+ */
-+struct dwc_iso_pkt_desc_port {
-+ uint32_t offset;
-+ uint32_t length; /* expected length */
-+ uint32_t actual_length;
-+ uint32_t status;
-+};
-+
-+struct dwc_iso_xreq_port {
-+ /** transfer/submission flag */
-+ uint32_t tr_sub_flags;
-+ /** Start the request ASAP */
-+#define DWC_EREQ_TF_ASAP 0x00000002
-+ /** Just enqueue the request w/o initiating a transfer */
-+#define DWC_EREQ_TF_ENQUEUE 0x00000004
-+
-+ /**
-+ * count of ISO packets attached to this request - shall
-+ * not exceed the pio_alloc_pkt_count
-+ */
-+ uint32_t pio_pkt_count;
-+ /** count of ISO packets allocated for this request */
-+ uint32_t pio_alloc_pkt_count;
-+ /** number of ISO packet errors */
-+ uint32_t error_count;
-+ /** reserved for future extension */
-+ uint32_t res;
-+ /** Will be allocated and freed in the UTE gadget and based on the CFC value */
-+ struct dwc_iso_pkt_desc_port *per_io_frame_descs;
-+};
-+#endif
-+/** DWC_otg request structure.
-+ * This structure is a list of requests.
-+ */
-+typedef struct dwc_otg_pcd_request {
-+ void *priv;
-+ void *buf;
-+ dwc_dma_t dma;
-+ uint32_t length;
-+ uint32_t actual;
-+ unsigned sent_zlp:1;
-+ /**
-+ * Used instead of original buffer if
-+ * it(physical address) is not dword-aligned.
-+ **/
-+ uint8_t *dw_align_buf;
-+ dwc_dma_t dw_align_buf_dma;
-+
-+ DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry;
-+#ifdef DWC_UTE_PER_IO
-+ struct dwc_iso_xreq_port ext_req;
-+ //void *priv_ereq_nport; /* */
-+#endif
-+} dwc_otg_pcd_request_t;
-+
-+DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request);
-+
-+/** PCD EP structure.
-+ * This structure describes an EP, there is an array of EPs in the PCD
-+ * structure.
-+ */
-+typedef struct dwc_otg_pcd_ep {
-+ /** USB EP Descriptor */
-+ const usb_endpoint_descriptor_t *desc;
-+
-+ /** queue of dwc_otg_pcd_requests. */
-+ struct req_list queue;
-+ unsigned stopped:1;
-+ unsigned disabling:1;
-+ unsigned dma:1;
-+ unsigned queue_sof:1;
-+
-+#ifdef DWC_EN_ISOC
-+ /** ISOC req handle passed */
-+ void *iso_req_handle;
-+#endif //_EN_ISOC_
-+
-+ /** DWC_otg ep data. */
-+ dwc_ep_t dwc_ep;
-+
-+ /** Pointer to PCD */
-+ struct dwc_otg_pcd *pcd;
-+
-+ void *priv;
-+} dwc_otg_pcd_ep_t;
-+
-+/** DWC_otg PCD Structure.
-+ * This structure encapsulates the data for the dwc_otg PCD.
-+ */
-+struct dwc_otg_pcd {
-+ const struct dwc_otg_pcd_function_ops *fops;
-+ /** The DWC otg device pointer */
-+ struct dwc_otg_device *otg_dev;
-+ /** Core Interface */
-+ dwc_otg_core_if_t *core_if;
-+ /** State of EP0 */
-+ ep0state_e ep0state;
-+ /** EP0 Request is pending */
-+ unsigned ep0_pending:1;
-+ /** Indicates when SET CONFIGURATION Request is in process */
-+ unsigned request_config:1;
-+ /** The state of the Remote Wakeup Enable. */
-+ unsigned remote_wakeup_enable:1;
-+ /** The state of the B-Device HNP Enable. */
-+ unsigned b_hnp_enable:1;
-+ /** The state of A-Device HNP Support. */
-+ unsigned a_hnp_support:1;
-+ /** The state of the A-Device Alt HNP support. */
-+ unsigned a_alt_hnp_support:1;
-+ /** Count of pending Requests */
-+ unsigned request_pending;
-+
-+ /** SETUP packet for EP0
-+ * This structure is allocated as a DMA buffer on PCD initialization
-+ * with enough space for up to 3 setup packets.
-+ */
-+ union {
-+ usb_device_request_t req;
-+ uint32_t d32[2];
-+ } *setup_pkt;
-+
-+ dwc_dma_t setup_pkt_dma_handle;
-+
-+ /* Additional buffer and flag for CTRL_WR premature case */
-+ uint8_t *backup_buf;
-+ unsigned data_terminated;
-+
-+ /** 2-byte dma buffer used to return status from GET_STATUS */
-+ uint16_t *status_buf;
-+ dwc_dma_t status_buf_dma_handle;
-+
-+ /** EP0 */
-+ dwc_otg_pcd_ep_t ep0;
-+
-+ /** Array of IN EPs. */
-+ dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1];
-+ /** Array of OUT EPs. */
-+ dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1];
-+ /** number of valid EPs in the above array. */
-+// unsigned num_eps : 4;
-+ dwc_spinlock_t *lock;
-+
-+ /** Tasklet to defer starting of TEST mode transmissions until
-+ * Status Phase has been completed.
-+ */
-+ dwc_tasklet_t *test_mode_tasklet;
-+
-+ /** Tasklet to delay starting of xfer in DMA mode */
-+ dwc_tasklet_t *start_xfer_tasklet;
-+
-+ /** The test mode to enter when the tasklet is executed. */
-+ unsigned test_mode;
-+ /** The cfi_api structure that implements most of the CFI API
-+ * and OTG specific core configuration functionality
-+ */
-+#ifdef DWC_UTE_CFI
-+ struct cfiobject *cfi;
-+#endif
-+
-+};
-+
-+static inline struct device *dwc_otg_pcd_to_dev(struct dwc_otg_pcd *pcd)
-+{
-+ return &pcd->otg_dev->os_dep.platformdev->dev;
-+}
-+
-+//FIXME this functions should be static, and this prototypes should be removed
-+extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep);
-+extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep,
-+ dwc_otg_pcd_request_t * req, int32_t status);
-+
-+void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
-+ void *req_handle);
-+
-+extern void do_test_mode(void *data);
-+#endif
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
-@@ -0,0 +1,361 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $
-+ * $Revision: #11 $
-+ * $Date: 2011/10/26 $
-+ * $Change: 1873028 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+
-+#if !defined(__DWC_PCD_IF_H__)
-+#define __DWC_PCD_IF_H__
-+
-+//#include "dwc_os.h"
-+#include "dwc_otg_core_if.h"
-+#include "dwc_otg_driver.h"
-+
-+/** @file
-+ * This file defines DWC_OTG PCD Core API.
-+ */
-+
-+struct dwc_otg_pcd;
-+typedef struct dwc_otg_pcd dwc_otg_pcd_t;
-+
-+/** Maxpacket size for EP0 */
-+#define MAX_EP0_SIZE 64
-+/** Maxpacket size for any EP */
-+#define MAX_PACKET_SIZE 1024
-+
-+/** @name Function Driver Callbacks */
-+/** @{ */
-+
-+/** This function will be called whenever a previously queued request has
-+ * completed. The status value will be set to -DWC_E_SHUTDOWN to indicated a
-+ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset,
-+ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid
-+ * parameters. */
-+typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle, int32_t status,
-+ uint32_t actual);
-+/**
-+ * This function will be called whenever a previousle queued ISOC request has
-+ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count
-+ * function.
-+ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_*
-+ * functions.
-+ */
-+typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle, int proc_buf_num);
-+/** This function should handle any SETUP request that cannot be handled by the
-+ * PCD Core. This includes most GET_DESCRIPTORs, SET_CONFIGS, Any
-+ * class-specific requests, etc. The function must non-blocking.
-+ *
-+ * Returns 0 on success.
-+ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported.
-+ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes.
-+ * Returns -DWC_E_SHUTDOWN on any other error. */
-+typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes);
-+/** This is called whenever the device has been disconnected. The function
-+ * driver should take appropriate action to clean up all pending requests in the
-+ * PCD Core, remove all endpoints (except ep0), and initialize back to reset
-+ * state. */
-+typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd);
-+/** This function is called when device has been connected. */
-+typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed);
-+/** This function is called when device has been suspended */
-+typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd);
-+/** This function is called when device has received LPM tokens, i.e.
-+ * device has been sent to sleep state. */
-+typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd);
-+/** This function is called when device has been resumed
-+ * from suspend(L2) or L1 sleep state. */
-+typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd);
-+/** This function is called whenever hnp params has been changed.
-+ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions
-+ * to get hnp parameters. */
-+typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd);
-+/** This function is called whenever USB RESET is detected. */
-+typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd);
-+
-+typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes);
-+
-+/**
-+ *
-+ * @param ep_handle Void pointer to the usb_ep structure
-+ * @param ereq_port Pointer to the extended request structure created in the
-+ * portable part.
-+ */
-+typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle, int32_t status,
-+ void *ereq_port);
-+/** Function Driver Ops Data Structure */
-+struct dwc_otg_pcd_function_ops {
-+ dwc_connect_cb_t connect;
-+ dwc_disconnect_cb_t disconnect;
-+ dwc_setup_cb_t setup;
-+ dwc_completion_cb_t complete;
-+ dwc_isoc_completion_cb_t isoc_complete;
-+ dwc_suspend_cb_t suspend;
-+ dwc_sleep_cb_t sleep;
-+ dwc_resume_cb_t resume;
-+ dwc_reset_cb_t reset;
-+ dwc_hnp_params_changed_cb_t hnp_changed;
-+ cfi_setup_cb_t cfi_setup;
-+#ifdef DWC_UTE_PER_IO
-+ xiso_completion_cb_t xisoc_complete;
-+#endif
-+};
-+/** @} */
-+
-+/** @name Function Driver Functions */
-+/** @{ */
-+
-+/** Call this function to get pointer on dwc_otg_pcd_t,
-+ * this pointer will be used for all PCD API functions.
-+ *
-+ * @param core_if The DWC_OTG Core
-+ */
-+extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_device_t *otg_dev);
-+
-+/** Frees PCD allocated by dwc_otg_pcd_init
-+ *
-+ * @param pcd The PCD
-+ */
-+extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd);
-+
-+/** Call this to bind the function driver to the PCD Core.
-+ *
-+ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function.
-+ * @param fops The Function Driver Ops data structure containing pointers to all callbacks.
-+ */
-+extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
-+ const struct dwc_otg_pcd_function_ops *fops);
-+
-+/** Enables an endpoint for use. This function enables an endpoint in
-+ * the PCD. The endpoint is described by the ep_desc which has the
-+ * same format as a USB ep descriptor. The ep_handle parameter is used to refer
-+ * to the endpoint from other API functions and in callbacks. Normally this
-+ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the
-+ * core for that interface.
-+ *
-+ * Returns -DWC_E_INVALID if invalid parameters were passed.
-+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
-+ * Returns 0 on success.
-+ *
-+ * @param pcd The PCD
-+ * @param ep_desc Endpoint descriptor
-+ * @param usb_ep Handle on endpoint, that will be used to identify endpoint.
-+ */
-+extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
-+ const uint8_t * ep_desc, void *usb_ep);
-+
-+/** Disable the endpoint referenced by ep_handle.
-+ *
-+ * Returns -DWC_E_INVALID if invalid parameters were passed.
-+ * Returns -DWC_E_SHUTDOWN if any other error occurred.
-+ * Returns 0 on success. */
-+extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle);
-+
-+/** Queue a data transfer request on the endpoint referenced by ep_handle.
-+ * After the transfer is completes, the complete callback will be called with
-+ * the request status.
-+ *
-+ * @param pcd The PCD
-+ * @param ep_handle The handle of the endpoint
-+ * @param buf The buffer for the data
-+ * @param dma_buf The DMA buffer for the data
-+ * @param buflen The length of the data transfer
-+ * @param zero Specifies whether to send zero length last packet.
-+ * @param req_handle Set this handle to any value to use to reference this
-+ * request in the ep_dequeue function or from the complete callback
-+ * @param atomic_alloc If driver need to perform atomic allocations
-+ * for internal data structures.
-+ *
-+ * Returns -DWC_E_INVALID if invalid parameters were passed.
-+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
-+ * Returns 0 on success. */
-+extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ uint8_t * buf, dwc_dma_t dma_buf,
-+ uint32_t buflen, int zero, void *req_handle,
-+ int atomic_alloc);
-+#ifdef DWC_UTE_PER_IO
-+/**
-+ *
-+ * @param ereq_nonport Pointer to the extended request part of the
-+ * usb_request structure defined in usb_gadget.h file.
-+ */
-+extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ uint8_t * buf, dwc_dma_t dma_buf,
-+ uint32_t buflen, int zero,
-+ void *req_handle, int atomic_alloc,
-+ void *ereq_nonport);
-+
-+#endif
-+
-+/** De-queue the specified data transfer that has not yet completed.
-+ *
-+ * Returns -DWC_E_INVALID if invalid parameters were passed.
-+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
-+ * Returns 0 on success. */
-+extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle);
-+
-+/** Halt (STALL) an endpoint or clear it.
-+ *
-+ * Returns -DWC_E_INVALID if invalid parameters were passed.
-+ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
-+ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later
-+ * Returns 0 on success. */
-+extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value);
-+
-+/** This function */
-+extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle);
-+
-+/** This function should be called on every hardware interrupt */
-+extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd);
-+
-+/** This function returns current frame number */
-+extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd);
-+
-+/**
-+ * Start isochronous transfers on the endpoint referenced by ep_handle.
-+ * For isochronous transfers duble buffering is used.
-+ * After processing each of buffers comlete callback will be called with
-+ * status for each transaction.
-+ *
-+ * @param pcd The PCD
-+ * @param ep_handle The handle of the endpoint
-+ * @param buf0 The virtual address of first data buffer
-+ * @param buf1 The virtual address of second data buffer
-+ * @param dma0 The DMA address of first data buffer
-+ * @param dma1 The DMA address of second data buffer
-+ * @param sync_frame Data pattern frame number
-+ * @param dp_frame Data size for pattern frame
-+ * @param data_per_frame Data size for regular frame
-+ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP.
-+ * @param buf_proc_intrvl Interval of ISOC Buffer processing
-+ * @param req_handle Handle of ISOC request
-+ * @param atomic_alloc Specefies whether to perform atomic allocation for
-+ * internal data structures.
-+ *
-+ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
-+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function.
-+ * Returns -DW_E_SHUTDOWN for any other error.
-+ * Returns 0 on success
-+ */
-+extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ uint8_t * buf0, uint8_t * buf1,
-+ dwc_dma_t dma0, dwc_dma_t dma1,
-+ int sync_frame, int dp_frame,
-+ int data_per_frame, int start_frame,
-+ int buf_proc_intrvl, void *req_handle,
-+ int atomic_alloc);
-+
-+/** Stop ISOC transfers on endpoint referenced by ep_handle.
-+ *
-+ * @param pcd The PCD
-+ * @param ep_handle The handle of the endpoint
-+ * @param req_handle Handle of ISOC request
-+ *
-+ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function
-+ * Returns 0 on success
-+ */
-+int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle);
-+
-+/** Get ISOC packet status.
-+ *
-+ * @param pcd The PCD
-+ * @param ep_handle The handle of the endpoint
-+ * @param iso_req_handle Isochronoush request handle
-+ * @param packet Number of packet
-+ * @param status Out parameter for returning status
-+ * @param actual Out parameter for returning actual length
-+ * @param offset Out parameter for returning offset
-+ *
-+ */
-+extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd,
-+ void *ep_handle,
-+ void *iso_req_handle, int packet,
-+ int *status, int *actual,
-+ int *offset);
-+
-+/** Get ISOC packet count.
-+ *
-+ * @param pcd The PCD
-+ * @param ep_handle The handle of the endpoint
-+ * @param iso_req_handle
-+ */
-+extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd,
-+ void *ep_handle,
-+ void *iso_req_handle);
-+
-+/** This function starts the SRP Protocol if no session is in progress. If
-+ * a session is already in progress, but the device is suspended,
-+ * remote wakeup signaling is started.
-+ */
-+extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd);
-+
-+/** This function returns 1 if LPM support is enabled, and 0 otherwise. */
-+extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd);
-+
-+/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */
-+extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd);
-+
-+/** Initiate SRP */
-+extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd);
-+
-+/** Starts remote wakeup signaling. */
-+extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set);
-+
-+/** Starts micorsecond soft disconnect. */
-+extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs);
-+/** This function returns whether device is dualspeed.*/
-+extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd);
-+
-+/** This function returns whether device is otg. */
-+extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd);
-+
-+/** These functions allow to get hnp parameters */
-+extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd);
-+extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd);
-+extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd);
-+
-+/** CFI specific Interface functions */
-+/** Allocate a cfi buffer */
-+extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep,
-+ dwc_dma_t * addr, size_t buflen,
-+ int flags);
-+
-+/******************************************************************************/
-+
-+/** @} */
-+
-+#endif /* __DWC_PCD_IF_H__ */
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
-@@ -0,0 +1,5148 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
-+ * $Revision: #116 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+
-+#include "dwc_otg_pcd.h"
-+
-+#ifdef DWC_UTE_CFI
-+#include "dwc_otg_cfi.h"
-+#endif
-+
-+#ifdef DWC_UTE_PER_IO
-+extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep);
-+#endif
-+//#define PRINT_CFI_DMA_DESCS
-+
-+#define DEBUG_EP0
-+
-+/**
-+ * This function updates OTG.
-+ */
-+static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset)
-+{
-+
-+ if (reset) {
-+ pcd->b_hnp_enable = 0;
-+ pcd->a_hnp_support = 0;
-+ pcd->a_alt_hnp_support = 0;
-+ }
-+
-+ if (pcd->fops->hnp_changed) {
-+ pcd->fops->hnp_changed(pcd);
-+ }
-+}
-+
-+/** @file
-+ * This file contains the implementation of the PCD Interrupt handlers.
-+ *
-+ * The PCD handles the device interrupts. Many conditions can cause a
-+ * device interrupt. When an interrupt occurs, the device interrupt
-+ * service routine determines the cause of the interrupt and
-+ * dispatches handling to the appropriate function. These interrupt
-+ * handling functions are described below.
-+ * All interrupt registers are processed from LSB to MSB.
-+ */
-+
-+/**
-+ * This function prints the ep0 state for debug purposes.
-+ */
-+static inline void print_ep0_state(dwc_otg_pcd_t * pcd)
-+{
-+#ifdef DEBUG
-+ char str[40];
-+
-+ switch (pcd->ep0state) {
-+ case EP0_DISCONNECT:
-+ dwc_strcpy(str, "EP0_DISCONNECT");
-+ break;
-+ case EP0_IDLE:
-+ dwc_strcpy(str, "EP0_IDLE");
-+ break;
-+ case EP0_IN_DATA_PHASE:
-+ dwc_strcpy(str, "EP0_IN_DATA_PHASE");
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+ dwc_strcpy(str, "EP0_OUT_DATA_PHASE");
-+ break;
-+ case EP0_IN_STATUS_PHASE:
-+ dwc_strcpy(str, "EP0_IN_STATUS_PHASE");
-+ break;
-+ case EP0_OUT_STATUS_PHASE:
-+ dwc_strcpy(str, "EP0_OUT_STATUS_PHASE");
-+ break;
-+ case EP0_STALL:
-+ dwc_strcpy(str, "EP0_STALL");
-+ break;
-+ default:
-+ dwc_strcpy(str, "EP0_INVALID");
-+ }
-+
-+ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
-+#endif
-+}
-+
-+/**
-+ * This function calculate the size of the payload in the memory
-+ * for out endpoints and prints size for debug purposes(used in
-+ * 2.93a DevOutNak feature).
-+ */
-+static inline void print_memory_payload(dwc_otg_pcd_t * pcd, dwc_ep_t * ep)
-+{
-+#ifdef DEBUG
-+ deptsiz_data_t deptsiz_init = {.d32 = 0 };
-+ deptsiz_data_t deptsiz_updt = {.d32 = 0 };
-+ int pack_num;
-+ unsigned payload;
-+
-+ deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num];
-+ deptsiz_updt.d32 =
-+ DWC_READ_REG32(&pcd->core_if->dev_if->
-+ out_ep_regs[ep->num]->doeptsiz);
-+ /* Payload will be */
-+ payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize;
-+ /* Packet count is decremented every time a packet
-+ * is written to the RxFIFO not in to the external memory
-+ * So, if payload == 0, then it means no packet was sent to ext memory*/
-+ pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt);
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "Payload for EP%d-%s\n",
-+ ep->num, (ep->is_in ? "IN" : "OUT"));
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "Number of transfered bytes = 0x%08x\n", payload);
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "Number of transfered packets = %d\n", pack_num);
-+#endif
-+}
-+
-+
-+#ifdef DWC_UTE_CFI
-+static inline void print_desc(struct dwc_otg_dma_desc *ddesc,
-+ const uint8_t * epname, int descnum)
-+{
-+ CFI_INFO
-+ ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n",
-+ epname, descnum, ddesc->buf, ddesc->status.b.bytes,
-+ ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts,
-+ ddesc->status.b.bs);
-+}
-+#endif
-+
-+/**
-+ * This function returns pointer to in ep struct with number ep_num
-+ */
-+static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
-+{
-+ int i;
-+ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-+ if (ep_num == 0) {
-+ return &pcd->ep0;
-+ } else {
-+ for (i = 0; i < num_in_eps; ++i) {
-+ if (pcd->in_ep[i].dwc_ep.num == ep_num)
-+ return &pcd->in_ep[i];
-+ }
-+ return 0;
-+ }
-+}
-+
-+/**
-+ * This function returns pointer to out ep struct with number ep_num
-+ */
-+static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
-+{
-+ int i;
-+ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-+ if (ep_num == 0) {
-+ return &pcd->ep0;
-+ } else {
-+ for (i = 0; i < num_out_eps; ++i) {
-+ if (pcd->out_ep[i].dwc_ep.num == ep_num)
-+ return &pcd->out_ep[i];
-+ }
-+ return 0;
-+ }
-+}
-+
-+/**
-+ * This functions gets a pointer to an EP from the wIndex address
-+ * value of the control request.
-+ */
-+dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex)
-+{
-+ dwc_otg_pcd_ep_t *ep;
-+ uint32_t ep_num = UE_GET_ADDR(wIndex);
-+
-+ if (ep_num == 0) {
-+ ep = &pcd->ep0;
-+ } else if (UE_GET_DIR(wIndex) == UE_DIR_IN) { /* in ep */
-+ ep = &pcd->in_ep[ep_num - 1];
-+ } else {
-+ ep = &pcd->out_ep[ep_num - 1];
-+ }
-+
-+ return ep;
-+}
-+
-+/**
-+ * This function checks the EP request queue, if the queue is not
-+ * empty the next request is started.
-+ */
-+void start_next_request(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_otg_pcd_request_t *req = 0;
-+ uint32_t max_transfer =
-+ GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
-+
-+#ifdef DWC_UTE_CFI
-+ struct dwc_otg_pcd *pcd;
-+ pcd = ep->pcd;
-+#endif
-+
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+
-+#ifdef DWC_UTE_CFI
-+ if (ep->dwc_ep.buff_mode != BM_STANDARD) {
-+ ep->dwc_ep.cfi_req_len = req->length;
-+ pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req);
-+ } else {
-+#endif
-+ /* Setup and start the Transfer */
-+ if (req->dw_align_buf) {
-+ ep->dwc_ep.dma_addr = req->dw_align_buf_dma;
-+ ep->dwc_ep.start_xfer_buff = req->dw_align_buf;
-+ ep->dwc_ep.xfer_buff = req->dw_align_buf;
-+ } else {
-+ ep->dwc_ep.dma_addr = req->dma;
-+ ep->dwc_ep.start_xfer_buff = req->buf;
-+ ep->dwc_ep.xfer_buff = req->buf;
-+ }
-+ ep->dwc_ep.sent_zlp = 0;
-+ ep->dwc_ep.total_len = req->length;
-+ ep->dwc_ep.xfer_len = 0;
-+ ep->dwc_ep.xfer_count = 0;
-+
-+ ep->dwc_ep.maxxfer = max_transfer;
-+ if (GET_CORE_IF(ep->pcd)->dma_desc_enable) {
-+ uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE
-+ - (DDMA_MAX_TRANSFER_SIZE % 4);
-+ if (ep->dwc_ep.is_in) {
-+ if (ep->dwc_ep.maxxfer >
-+ DDMA_MAX_TRANSFER_SIZE) {
-+ ep->dwc_ep.maxxfer =
-+ DDMA_MAX_TRANSFER_SIZE;
-+ }
-+ } else {
-+ if (ep->dwc_ep.maxxfer > out_max_xfer) {
-+ ep->dwc_ep.maxxfer =
-+ out_max_xfer;
-+ }
-+ }
-+ }
-+ if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
-+ ep->dwc_ep.maxxfer -=
-+ (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket);
-+ }
-+ if (req->sent_zlp) {
-+ if ((ep->dwc_ep.total_len %
-+ ep->dwc_ep.maxpacket == 0)
-+ && (ep->dwc_ep.total_len != 0)) {
-+ ep->dwc_ep.sent_zlp = 1;
-+ }
-+
-+ }
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
-+ } else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ DWC_PRINTF("There are no more ISOC requests \n");
-+ ep->dwc_ep.frame_num = 0xFFFFFFFF;
-+ }
-+}
-+
-+/**
-+ * This function handles the SOF Interrupts. At this time the SOF
-+ * Interrupt is disabled.
-+ */
-+int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+ gintsts_data_t gintsts;
-+
-+ DWC_DEBUGPL(DBG_PCD, "SOF\n");
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.sofintr = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function handles the Rx Status Queue Level Interrupt, which
-+ * indicates that there is a least one packet in the Rx FIFO. The
-+ * packets are moved from the FIFO to memory, where they will be
-+ * processed when the Endpoint Interrupt Register indicates Transfer
-+ * Complete or SETUP Phase Done.
-+ *
-+ * Repeat the following until the Rx Status Queue is empty:
-+ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
-+ * info
-+ * -# If Receive FIFO is empty then skip to step Clear the interrupt
-+ * and exit
-+ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
-+ * SETUP data to the buffer
-+ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data
-+ * to the destination buffer
-+ */
-+int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ gintmsk_data_t gintmask = {.d32 = 0 };
-+ device_grxsts_data_t status;
-+ dwc_otg_pcd_ep_t *ep;
-+ gintsts_data_t gintsts;
-+#ifdef DEBUG
-+ static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" };
-+#endif
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
-+ /* Disable the Rx Status Queue Level interrupt */
-+ gintmask.b.rxstsqlvl = 1;
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0);
-+
-+ /* Get the Status from the top of the FIFO */
-+ status.d32 = DWC_READ_REG32(&global_regs->grxstsp);
-+
-+ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
-+ "pktsts:%x Frame:%d(0x%0x)\n",
-+ status.b.epnum, status.b.bcnt,
-+ dpid_str[status.b.dpid],
-+ status.b.pktsts, status.b.fn, status.b.fn);
-+ /* Get pointer to EP structure */
-+ ep = get_out_ep(pcd, status.b.epnum);
-+
-+ switch (status.b.pktsts) {
-+ case DWC_DSTS_GOUT_NAK:
-+ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
-+ break;
-+ case DWC_STS_DATA_UPDT:
-+ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
-+ if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
-+ /** @todo NGS Check for buffer overflow? */
-+ dwc_otg_read_packet(core_if,
-+ ep->dwc_ep.xfer_buff,
-+ status.b.bcnt);
-+ ep->dwc_ep.xfer_count += status.b.bcnt;
-+ ep->dwc_ep.xfer_buff += status.b.bcnt;
-+ }
-+ break;
-+ case DWC_STS_XFER_COMP:
-+ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
-+ break;
-+ case DWC_DSTS_SETUP_COMP:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
-+#endif
-+ break;
-+ case DWC_DSTS_SETUP_UPDT:
-+ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,
-+ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
-+ pcd->setup_pkt->req.bmRequestType,
-+ pcd->setup_pkt->req.bRequest,
-+ UGETW(pcd->setup_pkt->req.wValue),
-+ UGETW(pcd->setup_pkt->req.wIndex),
-+ UGETW(pcd->setup_pkt->req.wLength));
-+#endif
-+ ep->dwc_ep.xfer_count += status.b.bcnt;
-+ break;
-+ default:
-+ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
-+ status.b.pktsts);
-+ break;
-+ }
-+
-+ /* Enable the Rx Status Queue Level interrupt */
-+ DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32);
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.rxstsqlvl = 1;
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
-+ return 1;
-+}
-+
-+/**
-+ * This function examines the Device IN Token Learning Queue to
-+ * determine the EP number of the last IN token received. This
-+ * implementation is for the Mass Storage device where there are only
-+ * 2 IN EPs (Control-IN and BULK-IN).
-+ *
-+ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
-+ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ *
-+ */
-+static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_device_global_regs_t *dev_global_regs =
-+ core_if->dev_if->dev_global_regs;
-+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
-+ /* Number of Token Queue Registers */
-+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
-+ dtknq1_data_t dtknqr1;
-+ uint32_t in_tkn_epnums[4];
-+ int ndx = 0;
-+ int i = 0;
-+ volatile uint32_t *addr = &dev_global_regs->dtknqr1;
-+ int epnum = 0;
-+
-+ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
-+
-+ /* Read the DTKNQ Registers */
-+ for (i = 0; i < DTKNQ_REG_CNT; i++) {
-+ in_tkn_epnums[i] = DWC_READ_REG32(addr);
-+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
-+ in_tkn_epnums[i]);
-+ if (addr == &dev_global_regs->dvbusdis) {
-+ addr = &dev_global_regs->dtknqr3_dthrctl;
-+ } else {
-+ ++addr;
-+ }
-+
-+ }
-+
-+ /* Copy the DTKNQR1 data to the bit field. */
-+ dtknqr1.d32 = in_tkn_epnums[0];
-+ /* Get the EP numbers */
-+ in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
-+ ndx = dtknqr1.b.intknwptr - 1;
-+
-+ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
-+ if (ndx == -1) {
-+ /** @todo Find a simpler way to calculate the max
-+ * queue position.*/
-+ int cnt = TOKEN_Q_DEPTH;
-+ if (TOKEN_Q_DEPTH <= 6) {
-+ cnt = TOKEN_Q_DEPTH - 1;
-+ } else if (TOKEN_Q_DEPTH <= 14) {
-+ cnt = TOKEN_Q_DEPTH - 7;
-+ } else if (TOKEN_Q_DEPTH <= 22) {
-+ cnt = TOKEN_Q_DEPTH - 15;
-+ } else {
-+ cnt = TOKEN_Q_DEPTH - 23;
-+ }
-+ epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF;
-+ } else {
-+ if (ndx <= 5) {
-+ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
-+ } else if (ndx <= 13) {
-+ ndx -= 6;
-+ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
-+ } else if (ndx <= 21) {
-+ ndx -= 14;
-+ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
-+ } else if (ndx <= 29) {
-+ ndx -= 22;
-+ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
-+ }
-+ }
-+ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
-+ return epnum;
-+}
-+
-+/**
-+ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
-+ * The active request is checked for the next packet to be loaded into
-+ * the non-periodic Tx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ gnptxsts_data_t txstatus = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+
-+ int epnum = 0;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ uint32_t len = 0;
-+ int dwords;
-+
-+ /* Get the epnum from the IN Token Learning Queue. */
-+ epnum = get_ep_of_last_in_token(core_if);
-+ ep = get_in_ep(pcd, epnum);
-+
-+ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum);
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+ dwords = (len + 3) / 4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32);
-+
-+ while (txstatus.b.nptxqspcavail > 0 &&
-+ txstatus.b.nptxfspcavail > dwords &&
-+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+ txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
-+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
-+ DWC_READ_REG32(&global_regs->gnptxsts));
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.nptxfempty = 1;
-+ DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
-+ * The active request is checked for the next packet to be loaded into
-+ * apropriate Tx FIFO.
-+ */
-+static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *ep_regs;
-+ dtxfsts_data_t txstatus = {.d32 = 0 };
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ uint32_t len = 0;
-+ int dwords;
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
-+
-+ ep_regs = core_if->dev_if->in_ep_regs[epnum];
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+
-+ /* While there is space in the queue and space in the FIFO and
-+ * More data to tranfer, Write packets to the Tx FIFO */
-+ txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
-+
-+ while (txstatus.b.txfspcavail > dwords &&
-+ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
-+ ep->dwc_ep.xfer_len != 0) {
-+ /* Write the FIFO */
-+ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
-+
-+ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
-+ if (len > ep->dwc_ep.maxpacket) {
-+ len = ep->dwc_ep.maxpacket;
-+ }
-+
-+ dwords = (len + 3) / 4;
-+ txstatus.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
-+ DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
-+ txstatus.d32);
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
-+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function is called when the Device is disconnected. It stops
-+ * any active requests and informs the Gadget driver of the
-+ * disconnect.
-+ */
-+void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd)
-+{
-+ int i, num_in_eps, num_out_eps;
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_SPINLOCK(pcd->lock);
-+
-+ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
-+ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
-+ /* don't disconnect drivers more than once */
-+ if (pcd->ep0state == EP0_DISCONNECT) {
-+ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
-+ DWC_SPINUNLOCK(pcd->lock);
-+ return;
-+ }
-+ pcd->ep0state = EP0_DISCONNECT;
-+
-+ /* Reset the OTG state. */
-+ dwc_otg_pcd_update_otg(pcd, 1);
-+
-+ /* Disable the NP Tx Fifo Empty Interrupt. */
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Flush the FIFOs */
-+ /**@todo NGS Flush Periodic FIFOs */
-+ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
-+ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
-+
-+ /* prevent new request submissions, kill any outstanding requests */
-+ ep = &pcd->ep0;
-+ dwc_otg_request_nuke(ep);
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < num_in_eps; i++) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
-+ dwc_otg_request_nuke(ep);
-+ }
-+ /* prevent new request submissions, kill any outstanding requests */
-+ for (i = 0; i < num_out_eps; i++) {
-+ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
-+ dwc_otg_request_nuke(ep);
-+ }
-+
-+ /* report disconnect; the driver is already quiesced */
-+ if (pcd->fops->disconnect) {
-+ DWC_SPINUNLOCK(pcd->lock);
-+ pcd->fops->disconnect(pcd);
-+ DWC_SPINLOCK(pcd->lock);
-+ }
-+ DWC_SPINUNLOCK(pcd->lock);
-+}
-+
-+/**
-+ * This interrupt indicates that ...
-+ */
-+int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+
-+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr");
-+ intr_mask.b.i2cintr = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.i2cintr = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that ...
-+ */
-+int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintsts_data_t gintsts;
-+#if defined(VERBOSE)
-+ DWC_PRINTF("Early Suspend Detected\n");
-+#endif
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.erlysuspend = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This function configures EPO to receive SETUP packets.
-+ *
-+ * @todo NGS: Update the comments from the HW FS.
-+ *
-+ * -# Program the following fields in the endpoint specific registers
-+ * for Control OUT EP 0, in order to receive a setup packet
-+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
-+ * setup packets)
-+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
-+ * to back setup packets)
-+ * - In DMA mode, DOEPDMA0 Register with a memory address to
-+ * store any setup packets received
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param pcd Programming view of the PCD.
-+ */
-+static inline void ep0_out_start(dwc_otg_core_if_t * core_if,
-+ dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ deptsiz0_data_t doeptsize0 = {.d32 = 0 };
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ depctl_data_t doepctl = {.d32 = 0 };
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__,
-+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
-+#endif
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
-+ if (doepctl.b.epena) {
-+ return;
-+ }
-+ }
-+
-+ doeptsize0.b.supcnt = 3;
-+ doeptsize0.b.pktcnt = 1;
-+ doeptsize0.b.xfersize = 8 * 3;
-+
-+ if (core_if->dma_enable) {
-+ if (!core_if->dma_desc_enable) {
-+ /** put here as for Hermes mode deptisz register should not be written */
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
-+ doeptsize0.d32);
-+
-+ /** @todo dma needs to handle multiple setup packets (up to 3) */
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
-+ pcd->setup_pkt_dma_handle);
-+ } else {
-+ dev_if->setup_desc_index =
-+ (dev_if->setup_desc_index + 1) & 1;
-+ dma_desc =
-+ dev_if->setup_desc_addr[dev_if->setup_desc_index];
-+
-+ /** DMA Descriptor Setup */
-+ dma_desc->status.b.bs = BS_HOST_BUSY;
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ dma_desc->status.b.sr = 0;
-+ dma_desc->status.b.mtrf = 0;
-+ }
-+ dma_desc->status.b.l = 1;
-+ dma_desc->status.b.ioc = 1;
-+ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
-+ dma_desc->buf = pcd->setup_pkt_dma_handle;
-+ dma_desc->status.b.sts = 0;
-+ dma_desc->status.b.bs = BS_HOST_READY;
-+
-+ /** DOEPDMA0 Register write */
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
-+ dev_if->dma_setup_desc_addr
-+ [dev_if->setup_desc_index]);
-+ }
-+
-+ } else {
-+ /** put here as for Hermes mode deptisz register should not be written */
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
-+ doeptsize0.d32);
-+ }
-+
-+ /** DOEPCTL0 Register write cnak will be set after setup interrupt */
-+ doepctl.d32 = 0;
-+ doepctl.b.epena = 1;
-+ if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
-+ doepctl.b.cnak = 1;
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
-+ } else {
-+ DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32);
-+ }
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
-+ DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
-+ DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
-+ DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
-+#endif
-+}
-+
-+/**
-+ * This interrupt occurs when a USB Reset is detected. When the USB
-+ * Reset Interrupt occurs the device state is set to DEFAULT and the
-+ * EP0 state is set to IDLE.
-+ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
-+ * -# Unmask the following interrupt bits
-+ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
-+ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
-+ * - DOEPMSK.SETUP = 1
-+ * - DOEPMSK.XferCompl = 1
-+ * - DIEPMSK.XferCompl = 1
-+ * - DIEPMSK.TimeOut = 1
-+ * -# Program the following fields in the endpoint specific registers
-+ * for Control OUT EP 0, in order to receive a setup packet
-+ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
-+ * setup packets)
-+ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
-+ * to back setup packets)
-+ * - In DMA mode, DOEPDMA0 Register with a memory address to
-+ * store any setup packets received
-+ * At this point, all the required initialization, except for enabling
-+ * the control 0 OUT endpoint is done, for receiving SETUP packets.
-+ */
-+int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ depctl_data_t doepctl = {.d32 = 0 };
-+ depctl_data_t diepctl = {.d32 = 0 };
-+ daint_data_t daintmsk = {.d32 = 0 };
-+ doepmsk_data_t doepmsk = {.d32 = 0 };
-+ diepmsk_data_t diepmsk = {.d32 = 0 };
-+ dcfg_data_t dcfg = {.d32 = 0 };
-+ grstctl_t resetctl = {.d32 = 0 };
-+ dctl_data_t dctl = {.d32 = 0 };
-+ int i = 0;
-+ gintsts_data_t gintsts;
-+ pcgcctl_data_t power = {.d32 = 0 };
-+
-+ power.d32 = DWC_READ_REG32(core_if->pcgcctl);
-+ if (power.b.stoppclk) {
-+ power.d32 = 0;
-+ power.b.stoppclk = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
-+
-+ power.b.pwrclmp = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
-+
-+ power.b.rstpdwnmodule = 1;
-+ DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
-+ }
-+
-+ core_if->lx_state = DWC_OTG_L0;
-+
-+ DWC_PRINTF("USB RESET\n");
-+#ifdef DWC_EN_ISOC
-+ for (i = 1; i < 16; ++i) {
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ ep = get_in_ep(pcd, i);
-+ if (ep != 0) {
-+ dwc_ep = &ep->dwc_ep;
-+ dwc_ep->next_frame = 0xffffffff;
-+ }
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ /* reset the HNP settings */
-+ dwc_otg_pcd_update_otg(pcd, 1);
-+
-+ /* Clear the Remote Wakeup Signalling */
-+ dctl.b.rmtwkupsig = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
-+
-+ /* Set NAK for all OUT EPs */
-+ doepctl.b.snak = 1;
-+ for (i = 0; i <= dev_if->num_out_eps; i++) {
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
-+ }
-+
-+ /* Flush the NP Tx FIFO */
-+ dwc_otg_flush_tx_fifo(core_if, 0x10);
-+ /* Flush the Learning Queue */
-+ resetctl.b.intknqflsh = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+ if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
-+ core_if->start_predict = 0;
-+ for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
-+ core_if->nextep_seq[i] = 0xff; // 0xff - EP not active
-+ }
-+ core_if->nextep_seq[0] = 0;
-+ core_if->first_in_nextep_seq = 0;
-+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
-+ diepctl.b.nextep = 0;
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
-+
-+ /* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
-+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.epmscnt = 2;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
-+ __func__, core_if->first_in_nextep_seq);
-+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
-+ }
-+ }
-+
-+ if (core_if->multiproc_int_enable) {
-+ daintmsk.b.inep0 = 1;
-+ daintmsk.b.outep0 = 1;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk,
-+ daintmsk.d32);
-+
-+ doepmsk.b.setup = 1;
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+ if ((core_if->dma_desc_enable) ||
-+ (core_if->dma_enable
-+ && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
-+ doepmsk.b.stsphsercvd = 1;
-+ }
-+ if (core_if->dma_desc_enable)
-+ doepmsk.b.bna = 1;
-+/*
-+ doepmsk.b.babble = 1;
-+ doepmsk.b.nyet = 1;
-+
-+ if (core_if->dma_enable) {
-+ doepmsk.b.nak = 1;
-+ }
-+*/
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0],
-+ doepmsk.d32);
-+
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ diepmsk.b.intknepmis = 1;
-+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
-+ diepmsk.b.intknepmis = 0;
-+
-+/* if (core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+*/
-+/*
-+ if (core_if->dma_enable) {
-+ diepmsk.b.nak = 1;
-+ }
-+*/
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0],
-+ diepmsk.d32);
-+ } else {
-+ daintmsk.b.inep0 = 1;
-+ daintmsk.b.outep0 = 1;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk,
-+ daintmsk.d32);
-+
-+ doepmsk.b.setup = 1;
-+ doepmsk.b.xfercompl = 1;
-+ doepmsk.b.ahberr = 1;
-+ doepmsk.b.epdisabled = 1;
-+
-+ if ((core_if->dma_desc_enable) ||
-+ (core_if->dma_enable
-+ && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
-+ doepmsk.b.stsphsercvd = 1;
-+ }
-+ if (core_if->dma_desc_enable)
-+ doepmsk.b.bna = 1;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
-+
-+ diepmsk.b.xfercompl = 1;
-+ diepmsk.b.timeout = 1;
-+ diepmsk.b.epdisabled = 1;
-+ diepmsk.b.ahberr = 1;
-+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
-+ diepmsk.b.intknepmis = 0;
-+/*
-+ if (core_if->dma_desc_enable) {
-+ diepmsk.b.bna = 1;
-+ }
-+*/
-+
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
-+ }
-+
-+ /* Reset Device Address */
-+ dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
-+ dcfg.b.devaddr = 0;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
-+
-+ /* setup EP0 to receive SETUP packets */
-+ if (core_if->snpsid <= OTG_CORE_REV_2_94a)
-+ ep0_out_start(core_if, pcd);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.usbreset = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Get the device speed from the device status register and convert it
-+ * to USB speed constant.
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ */
-+static int get_device_speed(dwc_otg_core_if_t * core_if)
-+{
-+ dsts_data_t dsts;
-+ int speed = 0;
-+ dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
-+
-+ switch (dsts.b.enumspd) {
-+ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
-+ speed = USB_SPEED_HIGH;
-+ break;
-+ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
-+ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
-+ speed = USB_SPEED_FULL;
-+ break;
-+
-+ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
-+ speed = USB_SPEED_LOW;
-+ break;
-+ }
-+
-+ return speed;
-+}
-+
-+/**
-+ * Read the device status register and set the device speed in the
-+ * data structure.
-+ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
-+ */
-+int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ gintsts_data_t gintsts;
-+ gusbcfg_data_t gusbcfg;
-+ dwc_otg_core_global_regs_t *global_regs =
-+ GET_CORE_IF(pcd)->core_global_regs;
-+ uint8_t utmi16b, utmi8b;
-+ int speed;
-+ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
-+
-+ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) {
-+ utmi16b = 6; //vahrama old value was 6;
-+ utmi8b = 9;
-+ } else {
-+ utmi16b = 4;
-+ utmi8b = 8;
-+ }
-+ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) {
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+ }
-+
-+#ifdef DEBUG_EP0
-+ print_ep0_state(pcd);
-+#endif
-+
-+ if (pcd->ep0state == EP0_DISCONNECT) {
-+ pcd->ep0state = EP0_IDLE;
-+ } else if (pcd->ep0state == EP0_STALL) {
-+ pcd->ep0state = EP0_IDLE;
-+ }
-+
-+ pcd->ep0state = EP0_IDLE;
-+
-+ ep0->stopped = 0;
-+
-+ speed = get_device_speed(GET_CORE_IF(pcd));
-+ pcd->fops->connect(pcd, speed);
-+
-+ /* Set USB turnaround time based on device speed and PHY interface. */
-+ gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
-+ if (speed == USB_SPEED_HIGH) {
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
-+ DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
-+ /* ULPI interface */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
-+ DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
-+ /* UTMI+ interface */
-+ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ } else if (GET_CORE_IF(pcd)->hwcfg4.
-+ b.utmi_phy_data_width == 1) {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ } else if (GET_CORE_IF(pcd)->
-+ core_params->phy_utmi_width == 8) {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ } else {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ }
-+ }
-+ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
-+ DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
-+ /* UTMI+ OR ULPI interface */
-+ if (gusbcfg.b.ulpi_utmi_sel == 1) {
-+ /* ULPI interface */
-+ gusbcfg.b.usbtrdtim = 9;
-+ } else {
-+ /* UTMI+ interface */
-+ if (GET_CORE_IF(pcd)->
-+ core_params->phy_utmi_width == 16) {
-+ gusbcfg.b.usbtrdtim = utmi16b;
-+ } else {
-+ gusbcfg.b.usbtrdtim = utmi8b;
-+ }
-+ }
-+ }
-+ } else {
-+ /* Full or low speed */
-+ gusbcfg.b.usbtrdtim = 9;
-+ }
-+ DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.enumdone = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that the ISO OUT Packet was dropped due to
-+ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs
-+ * read all the data from the Rx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+
-+ DWC_WARN("INTERRUPT Handler not implemented for %s\n",
-+ "ISOC Out Dropped");
-+
-+ intr_mask.b.isooutdrop = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.isooutdrop = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates the end of the portion of the micro-frame
-+ * for periodic transactions. If there is a periodic transaction for
-+ * the next frame, load the packets into the EP periodic Tx FIFO.
-+ */
-+int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP");
-+
-+ intr_mask.b.eopframe = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.eopframe = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that EP of the packet on the top of the
-+ * non-periodic Tx FIFO does not match EP of the IN Token received.
-+ *
-+ * The "Device IN Token Queue" Registers are read to determine the
-+ * order the IN Tokens have been received. The non-periodic Tx FIFO
-+ * is flushed, so it can be reloaded in the order seen in the IN Token
-+ * Queue.
-+ */
-+int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintsts_data_t gintsts;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dctl_data_t dctl;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) {
-+ core_if->start_predict = 1;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
-+
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ if (!gintsts.b.ginnakeff) {
-+ /* Disable EP Mismatch interrupt */
-+ intr_mask.d32 = 0;
-+ intr_mask.b.epmismatch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
-+ /* Enable the Global IN NAK Effective Interrupt */
-+ intr_mask.d32 = 0;
-+ intr_mask.b.ginnakeff = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
-+ /* Set the global non-periodic IN NAK handshake */
-+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
-+ dctl.b.sgnpinnak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-+ } else {
-+ DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n");
-+ }
-+ /* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective()
-+ * handler after Global IN NAK Effective interrupt will be asserted */
-+ }
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.epmismatch = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt is valid only in DMA mode. This interrupt indicates that the
-+ * core has stopped fetching data for IN endpoints due to the unavailability of
-+ * TxFIFO space or Request Queue space. This interrupt is used by the
-+ * application for an endpoint mismatch algorithm.
-+ *
-+ * @param pcd The PCD
-+ */
-+int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintsts_data_t gintsts;
-+ gintmsk_data_t gintmsk_data;
-+ dctl_data_t dctl;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
-+
-+ /* Clear the global non-periodic IN NAK handshake */
-+ dctl.d32 = 0;
-+ dctl.b.cgnpinnak = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+
-+ /* Mask GINTSTS.FETSUSP interrupt */
-+ gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-+ gintmsk_data.b.fetsusp = 0;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.fetsusp = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
-+
-+ return 1;
-+}
-+/**
-+ * This funcion stalls EP0.
-+ */
-+static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ usb_device_request_t *ctrl = &pcd->setup_pkt->req;
-+ DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
-+ ctrl->bmRequestType, ctrl->bRequest, err_val);
-+
-+ ep0->dwc_ep.is_in = 1;
-+ dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+ pcd->ep0.stopped = 1;
-+ pcd->ep0state = EP0_IDLE;
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+}
-+
-+/**
-+ * This functions delegates the setup command to the gadget driver.
-+ */
-+static inline void do_gadget_setup(dwc_otg_pcd_t * pcd,
-+ usb_device_request_t * ctrl)
-+{
-+ int ret = 0;
-+ DWC_SPINUNLOCK(pcd->lock);
-+ ret = pcd->fops->setup(pcd, (uint8_t *) ctrl);
-+ DWC_SPINLOCK(pcd->lock);
-+ if (ret < 0) {
-+ ep0_do_stall(pcd, ret);
-+ }
-+
-+ /** @todo This is a g_file_storage gadget driver specific
-+ * workaround: a DELAYED_STATUS result from the fsg_setup
-+ * routine will result in the gadget queueing a EP0 IN status
-+ * phase for a two-stage control transfer. Exactly the same as
-+ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
-+ * specific request. Need a generic way to know when the gadget
-+ * driver will queue the status phase. Can we assume when we
-+ * call the gadget driver setup() function that it will always
-+ * queue and require the following flag? Need to look into
-+ * this.
-+ */
-+
-+ if (ret == 256 + 999) {
-+ pcd->request_config = 1;
-+ }
-+}
-+
-+#ifdef DWC_UTE_CFI
-+/**
-+ * This functions delegates the CFI setup commands to the gadget driver.
-+ * This function will return a negative value to indicate a failure.
-+ */
-+static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd,
-+ struct cfi_usb_ctrlrequest *ctrl_req)
-+{
-+ int ret = 0;
-+
-+ if (pcd->fops && pcd->fops->cfi_setup) {
-+ DWC_SPINUNLOCK(pcd->lock);
-+ ret = pcd->fops->cfi_setup(pcd, ctrl_req);
-+ DWC_SPINLOCK(pcd->lock);
-+ if (ret < 0) {
-+ ep0_do_stall(pcd, ret);
-+ return ret;
-+ }
-+ }
-+
-+ return ret;
-+}
-+#endif
-+
-+/**
-+ * This function starts the Zero-Length Packet for the IN status phase
-+ * of a 2 stage control transfer.
-+ */
-+static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ if (pcd->ep0state == EP0_STALL) {
-+ return;
-+ }
-+
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+
-+ /* Prepare for more SETUP Packets */
-+ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
-+ if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a)
-+ && (pcd->core_if->dma_desc_enable)
-+ && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) {
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "Data terminated wait next packet in out_desc_addr\n");
-+ pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr);
-+ pcd->data_terminated = 1;
-+ }
-+ ep0->dwc_ep.xfer_len = 0;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.is_in = 1;
-+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+ /* Prepare for more SETUP Packets */
-+ //ep0_out_start(GET_CORE_IF(pcd), pcd);
-+}
-+
-+/**
-+ * This function starts the Zero-Length Packet for the OUT status phase
-+ * of a 2 stage control transfer.
-+ */
-+static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ if (pcd->ep0state == EP0_STALL) {
-+ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
-+ return;
-+ }
-+ pcd->ep0state = EP0_OUT_STATUS_PHASE;
-+
-+ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
-+ ep0->dwc_ep.xfer_len = 0;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.is_in = 0;
-+ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+
-+ /* Prepare for more SETUP Packets */
-+ if (GET_CORE_IF(pcd)->dma_enable == 0) {
-+ ep0_out_start(GET_CORE_IF(pcd), pcd);
-+ }
-+}
-+
-+/**
-+ * Clear the EP halt (STALL) and if pending requests start the
-+ * transfer.
-+ */
-+static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
-+{
-+ if (ep->dwc_ep.stall_clear_flag == 0)
-+ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
-+
-+ /* Reactive the EP */
-+ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
-+ if (ep->stopped) {
-+ ep->stopped = 0;
-+ /* If there is a request in the EP queue start it */
-+
-+ /** @todo FIXME: this causes an EP mismatch in DMA mode.
-+ * epmismatch not yet implemented. */
-+
-+ /*
-+ * Above fixme is solved by implmenting a tasklet to call the
-+ * start_next_request(), outside of interrupt context at some
-+ * time after the current time, after a clear-halt setup packet.
-+ * Still need to implement ep mismatch in the future if a gadget
-+ * ever uses more than one endpoint at once
-+ */
-+ ep->queue_sof = 1;
-+ DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet);
-+ }
-+ /* Start Control Status Phase */
-+ do_setup_in_status_phase(pcd);
-+}
-+
-+/**
-+ * This function is called when the SET_FEATURE TEST_MODE Setup packet
-+ * is sent from the host. The Device Control register is written with
-+ * the Test Mode bits set to the specified Test Mode. This is done as
-+ * a tasklet so that the "Status" phase of the control transfer
-+ * completes before transmitting the TEST packets.
-+ *
-+ * @todo This has not been tested since the tasklet struct was put
-+ * into the PCD struct!
-+ *
-+ */
-+void do_test_mode(void *data)
-+{
-+ dctl_data_t dctl;
-+ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ int test_mode = pcd->test_mode;
-+
-+// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
-+
-+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
-+ switch (test_mode) {
-+ case 1: // TEST_J
-+ dctl.b.tstctl = 1;
-+ break;
-+
-+ case 2: // TEST_K
-+ dctl.b.tstctl = 2;
-+ break;
-+
-+ case 3: // TEST_SE0_NAK
-+ dctl.b.tstctl = 3;
-+ break;
-+
-+ case 4: // TEST_PACKET
-+ dctl.b.tstctl = 4;
-+ break;
-+
-+ case 5: // TEST_FORCE_ENABLE
-+ dctl.b.tstctl = 5;
-+ break;
-+ }
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-+}
-+
-+/**
-+ * This function process the GET_STATUS Setup Commands.
-+ */
-+static inline void do_get_status(dwc_otg_pcd_t * pcd)
-+{
-+ usb_device_request_t ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ uint16_t *status = pcd->status_buf;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD,
-+ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bmRequestType, ctrl.bRequest,
-+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
-+ UGETW(ctrl.wLength));
-+#endif
-+
-+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
-+ case UT_DEVICE:
-+ if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */
-+ DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex));
-+ DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver);
-+ DWC_PRINTF("OTG CAP - %d, %d\n",
-+ core_if->core_params->otg_cap,
-+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
-+ if (core_if->otg_ver == 1
-+ && core_if->core_params->otg_cap ==
-+ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ uint8_t *otgsts = (uint8_t*)pcd->status_buf;
-+ *otgsts = (core_if->otg_sts & 0x1);
-+ pcd->ep0_pending = 1;
-+ ep0->dwc_ep.start_xfer_buff =
-+ (uint8_t *) otgsts;
-+ ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts;
-+ ep0->dwc_ep.dma_addr =
-+ pcd->status_buf_dma_handle;
-+ ep0->dwc_ep.xfer_len = 1;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
-+ &ep0->dwc_ep);
-+ return;
-+ } else {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ break;
-+ } else {
-+ *status = 0x1; /* Self powered */
-+ *status |= pcd->remote_wakeup_enable << 1;
-+ break;
-+ }
-+ case UT_INTERFACE:
-+ *status = 0;
-+ break;
-+
-+ case UT_ENDPOINT:
-+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
-+ if (ep == 0 || UGETW(ctrl.wLength) > 2) {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ /** @todo check for EP stall */
-+ *status = ep->stopped;
-+ break;
-+ }
-+ pcd->ep0_pending = 1;
-+ ep0->dwc_ep.start_xfer_buff = (uint8_t *) status;
-+ ep0->dwc_ep.xfer_buff = (uint8_t *) status;
-+ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
-+ ep0->dwc_ep.xfer_len = 2;
-+ ep0->dwc_ep.xfer_count = 0;
-+ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
-+ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
-+}
-+
-+/**
-+ * This function process the SET_FEATURE Setup Commands.
-+ */
-+static inline void do_set_feature(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+ usb_device_request_t ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+ int32_t otg_cap_param = core_if->core_params->otg_cap;
-+ gotgctl_data_t gotgctl = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bmRequestType, ctrl.bRequest,
-+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
-+ UGETW(ctrl.wLength));
-+ DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param);
-+
-+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
-+ case UT_DEVICE:
-+ switch (UGETW(ctrl.wValue)) {
-+ case UF_DEVICE_REMOTE_WAKEUP:
-+ pcd->remote_wakeup_enable = 1;
-+ break;
-+
-+ case UF_TEST_MODE:
-+ /* Setup the Test Mode tasklet to do the Test
-+ * Packet generation after the SETUP Status
-+ * phase has completed. */
-+
-+ /** @todo This has not been tested since the
-+ * tasklet struct was put into the PCD
-+ * struct! */
-+ pcd->test_mode = UGETW(ctrl.wIndex) >> 8;
-+ DWC_TASK_SCHEDULE(pcd->test_mode_tasklet);
-+ break;
-+
-+ case UF_DEVICE_B_HNP_ENABLE:
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
-+
-+ /* dev may initiate HNP */
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->b_hnp_enable = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
-+ /**@todo Is the gotgctl.devhnpen cleared
-+ * by a USB Reset? */
-+ gotgctl.b.devhnpen = 1;
-+ gotgctl.b.hnpreq = 1;
-+ DWC_WRITE_REG32(&global_regs->gotgctl,
-+ gotgctl.d32);
-+ } else {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ break;
-+
-+ case UF_DEVICE_A_HNP_SUPPORT:
-+ /* RH port supports HNP */
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->a_hnp_support = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ } else {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ break;
-+
-+ case UF_DEVICE_A_ALT_HNP_SUPPORT:
-+ /* other RH port does */
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
-+ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
-+ pcd->a_alt_hnp_support = 1;
-+ dwc_otg_pcd_update_otg(pcd, 0);
-+ } else {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ break;
-+
-+ default:
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+
-+ case UT_INTERFACE:
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ case UT_ENDPOINT:
-+ if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) {
-+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
-+ if (ep == 0) {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ ep->stopped = 1;
-+ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function process the CLEAR_FEATURE Setup Commands.
-+ */
-+static inline void do_clear_feature(dwc_otg_pcd_t * pcd)
-+{
-+ usb_device_request_t ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep = 0;
-+
-+ DWC_DEBUGPL(DBG_PCD,
-+ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bmRequestType, ctrl.bRequest,
-+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
-+ UGETW(ctrl.wLength));
-+
-+ switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
-+ case UT_DEVICE:
-+ switch (UGETW(ctrl.wValue)) {
-+ case UF_DEVICE_REMOTE_WAKEUP:
-+ pcd->remote_wakeup_enable = 0;
-+ break;
-+
-+ case UF_TEST_MODE:
-+ /** @todo Add CLEAR_FEATURE for TEST modes. */
-+ break;
-+
-+ default:
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+ do_setup_in_status_phase(pcd);
-+ break;
-+
-+ case UT_ENDPOINT:
-+ ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
-+ if (ep == 0) {
-+ ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
-+ return;
-+ }
-+
-+ pcd_clear_halt(pcd, ep);
-+
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function process the SET_ADDRESS Setup Commands.
-+ */
-+static inline void do_set_address(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ usb_device_request_t ctrl = pcd->setup_pkt->req;
-+
-+ if (ctrl.bmRequestType == UT_DEVICE) {
-+ dcfg_data_t dcfg = {.d32 = 0 };
-+
-+#ifdef DEBUG_EP0
-+// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
-+#endif
-+ dcfg.b.devaddr = UGETW(ctrl.wValue);
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
-+ do_setup_in_status_phase(pcd);
-+ }
-+}
-+
-+/**
-+ * This function processes SETUP commands. In Linux, the USB Command
-+ * processing is done in two places - the first being the PCD and the
-+ * second in the Gadget Driver (for example, the File-Backed Storage
-+ * Gadget Driver).
-+ *
-+ * <table>
-+ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr>
-+ *
-+ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
-+ * defined in chapter 9 of the USB 2.0 Specification chapter 9
-+ * </td></tr>
-+ *
-+ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
-+ * requests are the ENDPOINT_HALT feature is procesed, all others the
-+ * interface requests are ignored.</td></tr>
-+ *
-+ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
-+ * requests are processed by the PCD. Interface requests are passed
-+ * to the Gadget Driver.</td></tr>
-+ *
-+ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
-+ * with device address received </td></tr>
-+ *
-+ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
-+ * requested descriptor</td></tr>
-+ *
-+ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
-+ * not implemented by any of the existing Gadget Drivers.</td></tr>
-+ *
-+ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
-+ * all EPs and enable EPs for new configuration.</td></tr>
-+ *
-+ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
-+ * the current configuration</td></tr>
-+ *
-+ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
-+ * EPs and enable EPs for new configuration.</td></tr>
-+ *
-+ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
-+ * current interface.</td></tr>
-+ *
-+ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
-+ * message.</td></tr>
-+ * </table>
-+ *
-+ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
-+ * processed by pcd_setup. Calling the Function Driver's setup function from
-+ * pcd_setup processes the gadget SETUP commands.
-+ */
-+static inline void pcd_setup(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ usb_device_request_t ctrl = pcd->setup_pkt->req;
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+
-+ deptsiz0_data_t doeptsize0 = {.d32 = 0 };
-+
-+#ifdef DWC_UTE_CFI
-+ int retval = 0;
-+ struct cfi_usb_ctrlrequest cfi_req;
-+#endif
-+
-+ doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz);
-+
-+ /** In BDMA more then 1 setup packet is not supported till 3.00a */
-+ if (core_if->dma_enable && core_if->dma_desc_enable == 0
-+ && (doeptsize0.b.supcnt < 2)
-+ && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
-+ DWC_ERROR
-+ ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n");
-+ }
-+ if ((core_if->snpsid >= OTG_CORE_REV_3_00a)
-+ && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) {
-+ ctrl =
-+ (pcd->setup_pkt +
-+ (3 - doeptsize0.b.supcnt - 1 +
-+ ep0->dwc_ep.stp_rollover))->req;
-+ }
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
-+ ctrl.bmRequestType, ctrl.bRequest,
-+ UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
-+ UGETW(ctrl.wLength));
-+#endif
-+
-+ /* Clean up the request queue */
-+ dwc_otg_request_nuke(ep0);
-+ ep0->stopped = 0;
-+
-+ if (ctrl.bmRequestType & UE_DIR_IN) {
-+ ep0->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_DATA_PHASE;
-+ } else {
-+ ep0->dwc_ep.is_in = 0;
-+ pcd->ep0state = EP0_OUT_DATA_PHASE;
-+ }
-+
-+ if (UGETW(ctrl.wLength) == 0) {
-+ ep0->dwc_ep.is_in = 1;
-+ pcd->ep0state = EP0_IN_STATUS_PHASE;
-+ }
-+
-+ if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) {
-+
-+#ifdef DWC_UTE_CFI
-+ DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t));
-+
-+ //printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n",
-+ ctrl.bRequestType, ctrl.bRequest);
-+ if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) {
-+ if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) {
-+ retval = cfi_setup(pcd, &cfi_req);
-+ if (retval < 0) {
-+ ep0_do_stall(pcd, retval);
-+ pcd->ep0_pending = 0;
-+ return;
-+ }
-+
-+ /* if need gadget setup then call it and check the retval */
-+ if (pcd->cfi->need_gadget_att) {
-+ retval =
-+ cfi_gadget_setup(pcd,
-+ &pcd->
-+ cfi->ctrl_req);
-+ if (retval < 0) {
-+ pcd->ep0_pending = 0;
-+ return;
-+ }
-+ }
-+
-+ if (pcd->cfi->need_status_in_complete) {
-+ do_setup_in_status_phase(pcd);
-+ }
-+ return;
-+ }
-+ }
-+#endif
-+
-+ /* handle non-standard (class/vendor) requests in the gadget driver */
-+ do_gadget_setup(pcd, &ctrl);
-+ return;
-+ }
-+
-+ /** @todo NGS: Handle bad setup packet? */
-+
-+///////////////////////////////////////////
-+//// --- Standard Request handling --- ////
-+
-+ switch (ctrl.bRequest) {
-+ case UR_GET_STATUS:
-+ do_get_status(pcd);
-+ break;
-+
-+ case UR_CLEAR_FEATURE:
-+ do_clear_feature(pcd);
-+ break;
-+
-+ case UR_SET_FEATURE:
-+ do_set_feature(pcd);
-+ break;
-+
-+ case UR_SET_ADDRESS:
-+ do_set_address(pcd);
-+ break;
-+
-+ case UR_SET_INTERFACE:
-+ case UR_SET_CONFIG:
-+// _pcd->request_config = 1; /* Configuration changed */
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ case UR_SYNCH_FRAME:
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+
-+ default:
-+ /* Call the Gadget Driver's setup functions */
-+ do_gadget_setup(pcd, &ctrl);
-+ break;
-+ }
-+}
-+
-+/**
-+ * This function completes the ep0 control transfer.
-+ */
-+static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-+ dev_if->in_ep_regs[ep->dwc_ep.num];
-+#ifdef DEBUG_EP0
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-+ dev_if->out_ep_regs[ep->dwc_ep.num];
-+#endif
-+ deptsiz0_data_t deptsiz;
-+ dev_dma_desc_sts_t desc_sts;
-+ dwc_otg_pcd_request_t *req;
-+ int is_last = 0;
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+
-+#ifdef DWC_UTE_CFI
-+ struct cfi_usb_ctrlrequest *ctrlreq;
-+ int retval = -DWC_E_NOT_SUPPORTED;
-+#endif
-+
-+ desc_sts.b.bytes = 0;
-+
-+ if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ if (ep->dwc_ep.is_in) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
-+#endif
-+ do_setup_out_status_phase(pcd);
-+ } else {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
-+#endif
-+
-+#ifdef DWC_UTE_CFI
-+ ctrlreq = &pcd->cfi->ctrl_req;
-+
-+ if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) {
-+ if (ctrlreq->bRequest > 0xB0
-+ && ctrlreq->bRequest < 0xBF) {
-+
-+ /* Return if the PCD failed to handle the request */
-+ if ((retval =
-+ pcd->cfi->ops.
-+ ctrl_write_complete(pcd->cfi,
-+ pcd)) < 0) {
-+ CFI_INFO
-+ ("ERROR setting a new value in the PCD(%d)\n",
-+ retval);
-+ ep0_do_stall(pcd, retval);
-+ pcd->ep0_pending = 0;
-+ return 0;
-+ }
-+
-+ /* If the gadget needs to be notified on the request */
-+ if (pcd->cfi->need_gadget_att == 1) {
-+ //retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req);
-+ retval =
-+ cfi_gadget_setup(pcd,
-+ &pcd->cfi->
-+ ctrl_req);
-+
-+ /* Return from the function if the gadget failed to process
-+ * the request properly - this should never happen !!!
-+ */
-+ if (retval < 0) {
-+ CFI_INFO
-+ ("ERROR setting a new value in the gadget(%d)\n",
-+ retval);
-+ pcd->ep0_pending = 0;
-+ return 0;
-+ }
-+ }
-+
-+ CFI_INFO("%s: RETVAL=%d\n", __func__,
-+ retval);
-+ /* If we hit here then the PCD and the gadget has properly
-+ * handled the request - so send the ZLP IN to the host.
-+ */
-+ /* @todo: MAS - decide whether we need to start the setup
-+ * stage based on the need_setup value of the cfi object
-+ */
-+ do_setup_in_status_phase(pcd);
-+ pcd->ep0_pending = 0;
-+ return 1;
-+ }
-+ }
-+#endif
-+
-+ do_setup_in_status_phase(pcd);
-+ }
-+ pcd->ep0_pending = 0;
-+ return 1;
-+ }
-+
-+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ return 0;
-+ }
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+
-+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE
-+ || pcd->ep0state == EP0_IN_STATUS_PHASE) {
-+ is_last = 1;
-+ } else if (ep->dwc_ep.is_in) {
-+ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
-+ if (core_if->dma_desc_enable != 0)
-+ desc_sts = dev_if->in_desc_addr->status;
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xfersize=%d pktcnt=%d\n",
-+ ep->dwc_ep.num, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+#endif
-+
-+ if (((core_if->dma_desc_enable == 0)
-+ && (deptsiz.b.xfersize == 0))
-+ || ((core_if->dma_desc_enable != 0)
-+ && (desc_sts.b.bytes == 0))) {
-+ req->actual = ep->dwc_ep.xfer_count;
-+ /* Is a Zero Len Packet needed? */
-+ if (req->sent_zlp) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
-+#endif
-+ req->sent_zlp = 0;
-+ }
-+ do_setup_out_status_phase(pcd);
-+ }
-+ } else {
-+ /* ep0-OUT */
-+#ifdef DEBUG_EP0
-+ deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz);
-+ DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n",
-+ ep->dwc_ep.num, ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+#endif
-+ req->actual = ep->dwc_ep.xfer_count;
-+
-+ /* Is a Zero Len Packet needed? */
-+ if (req->sent_zlp) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
-+#endif
-+ req->sent_zlp = 0;
-+ }
-+ /* For older cores do setup in status phase in Slave/BDMA modes,
-+ * starting from 3.00 do that only in slave, and for DMA modes
-+ * just re-enable ep 0 OUT here*/
-+ if (core_if->dma_enable == 0
-+ || (core_if->dma_desc_enable == 0
-+ && core_if->snpsid <= OTG_CORE_REV_2_94a)) {
-+ do_setup_in_status_phase(pcd);
-+ } else if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "Enable out ep before in status phase\n");
-+ ep0_out_start(core_if, pcd);
-+ }
-+ }
-+
-+ /* Complete the request */
-+ if (is_last) {
-+ dwc_otg_request_done(ep, req, 0);
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+#ifdef DWC_UTE_CFI
-+/**
-+ * This function calculates traverses all the CFI DMA descriptors and
-+ * and accumulates the bytes that are left to be transfered.
-+ *
-+ * @return The total bytes left to transfered, or a negative value as failure
-+ */
-+static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep)
-+{
-+ int32_t ret = 0;
-+ int i;
-+ struct dwc_otg_dma_desc *ddesc = NULL;
-+ struct cfi_ep *cfiep;
-+
-+ /* See if the pcd_ep has its respective cfi_ep mapped */
-+ cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep);
-+ if (!cfiep) {
-+ CFI_INFO("%s: Failed to find ep\n", __func__);
-+ return -1;
-+ }
-+
-+ ddesc = ep->dwc_ep.descs;
-+
-+ for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) {
-+
-+#if defined(PRINT_CFI_DMA_DESCS)
-+ print_desc(ddesc, ep->ep.name, i);
-+#endif
-+ ret += ddesc->status.b.bytes;
-+ ddesc++;
-+ }
-+
-+ if (ret)
-+ CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__,
-+ ret);
-+
-+ return ret;
-+}
-+#endif
-+
-+/**
-+ * This function completes the request for the EP. If there are
-+ * additional requests for the EP in the queue they will be started.
-+ */
-+static void complete_ep(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ struct device *dev = dwc_otg_pcd_to_dev(ep->pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs =
-+ dev_if->in_ep_regs[ep->dwc_ep.num];
-+ deptsiz_data_t deptsiz;
-+ dev_dma_desc_sts_t desc_sts;
-+ dwc_otg_pcd_request_t *req = 0;
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ uint32_t byte_count = 0;
-+ int is_last = 0;
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num,
-+ (ep->dwc_ep.is_in ? "IN" : "OUT"));
-+
-+ /* Get any pending requests */
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ if (!req) {
-+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
-+ return;
-+ }
-+ } else {
-+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
-+ return;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
-+
-+ if (ep->dwc_ep.is_in) {
-+ deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
-+
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable == 0) {
-+ if (deptsiz.b.xfersize == 0
-+ && deptsiz.b.pktcnt == 0) {
-+ byte_count =
-+ ep->dwc_ep.xfer_len -
-+ ep->dwc_ep.xfer_count;
-+
-+ ep->dwc_ep.xfer_buff += byte_count;
-+ ep->dwc_ep.dma_addr += byte_count;
-+ ep->dwc_ep.xfer_count += byte_count;
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "%d-%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->dwc_ep.num,
-+ (ep->dwc_ep.
-+ is_in ? "IN" : "OUT"),
-+ ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+
-+ if (ep->dwc_ep.xfer_len <
-+ ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer
-+ (core_if, &ep->dwc_ep);
-+ } else if (ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length transfer in case if it is queued
-+ * a transfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Descriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 length.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer
-+ (core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ } else {
-+ if (ep->dwc_ep.type ==
-+ DWC_OTG_EP_TYPE_ISOC) {
-+ req->actual = 0;
-+ dwc_otg_request_done(ep, req, 0);
-+
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+
-+ /* If there is a request in the queue start it. */
-+ start_next_request(ep);
-+ } else
-+ DWC_WARN
-+ ("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n",
-+ ep->dwc_ep.num,
-+ (ep->dwc_ep.is_in ? "IN" : "OUT"),
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+ }
-+ } else {
-+ dma_desc = ep->dwc_ep.desc_addr;
-+ byte_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+
-+#ifdef DWC_UTE_CFI
-+ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
-+ ep->dwc_ep.buff_mode);
-+ if (ep->dwc_ep.buff_mode != BM_STANDARD) {
-+ int residue;
-+
-+ residue = cfi_calc_desc_residue(ep);
-+ if (residue < 0)
-+ return;
-+
-+ byte_count = residue;
-+ } else {
-+#endif
-+ for (i = 0; i < ep->dwc_ep.desc_cnt;
-+ ++i) {
-+ desc_sts = dma_desc->status;
-+ byte_count += desc_sts.b.bytes;
-+ dma_desc++;
-+ }
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ if (byte_count == 0) {
-+ ep->dwc_ep.xfer_count =
-+ ep->dwc_ep.total_len;
-+ is_last = 1;
-+ } else {
-+ DWC_WARN("Incomplete transfer\n");
-+ }
-+ }
-+ } else {
-+ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "%d-%s len=%d xfersize=%d pktcnt=%d\n",
-+ ep->dwc_ep.num,
-+ ep->dwc_ep.is_in ? "IN" : "OUT",
-+ ep->dwc_ep.xfer_len,
-+ deptsiz.b.xfersize,
-+ deptsiz.b.pktcnt);
-+
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if,
-+ &ep->dwc_ep);
-+ } else if (ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if,
-+ &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ } else {
-+ DWC_WARN
-+ ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n",
-+ ep->dwc_ep.num,
-+ (ep->dwc_ep.is_in ? "IN" : "OUT"),
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ }
-+ }
-+ } else {
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs =
-+ dev_if->out_ep_regs[ep->dwc_ep.num];
-+ desc_sts.d32 = 0;
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable) {
-+ dma_desc = ep->dwc_ep.desc_addr;
-+ byte_count = 0;
-+ ep->dwc_ep.sent_zlp = 0;
-+
-+#ifdef DWC_UTE_CFI
-+ CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
-+ ep->dwc_ep.buff_mode);
-+ if (ep->dwc_ep.buff_mode != BM_STANDARD) {
-+ int residue;
-+ residue = cfi_calc_desc_residue(ep);
-+ if (residue < 0)
-+ return;
-+ byte_count = residue;
-+ } else {
-+#endif
-+
-+ for (i = 0; i < ep->dwc_ep.desc_cnt;
-+ ++i) {
-+ desc_sts = dma_desc->status;
-+ byte_count += desc_sts.b.bytes;
-+ dma_desc++;
-+ }
-+
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ /* Checking for interrupt Out transfers with not
-+ * dword aligned mps sizes
-+ */
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR &&
-+ (ep->dwc_ep.maxpacket%4)) {
-+ ep->dwc_ep.xfer_count =
-+ ep->dwc_ep.total_len - byte_count;
-+ if ((ep->dwc_ep.xfer_len %
-+ ep->dwc_ep.maxpacket)
-+ && (ep->dwc_ep.xfer_len /
-+ ep->dwc_ep.maxpacket <
-+ MAX_DMA_DESC_CNT))
-+ ep->dwc_ep.xfer_len -=
-+ (ep->dwc_ep.desc_cnt -
-+ 1) * ep->dwc_ep.maxpacket +
-+ ep->dwc_ep.xfer_len %
-+ ep->dwc_ep.maxpacket;
-+ else
-+ ep->dwc_ep.xfer_len -=
-+ ep->dwc_ep.desc_cnt *
-+ ep->dwc_ep.maxpacket;
-+ if (ep->dwc_ep.xfer_len > 0) {
-+ dwc_otg_ep_start_transfer
-+ (core_if, &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ } else {
-+ ep->dwc_ep.xfer_count =
-+ ep->dwc_ep.total_len - byte_count +
-+ ((4 -
-+ (ep->dwc_ep.
-+ total_len & 0x3)) & 0x3);
-+ is_last = 1;
-+ }
-+ } else {
-+ deptsiz.d32 = 0;
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&out_ep_regs->doeptsiz);
-+
-+ byte_count = (ep->dwc_ep.xfer_len -
-+ ep->dwc_ep.xfer_count -
-+ deptsiz.b.xfersize);
-+ ep->dwc_ep.xfer_buff += byte_count;
-+ ep->dwc_ep.dma_addr += byte_count;
-+ ep->dwc_ep.xfer_count += byte_count;
-+
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if,
-+ &ep->dwc_ep);
-+ } else if (ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length trasfer in case if it is queued
-+ * a trasfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Desriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 legth.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if,
-+ &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+ } else {
-+ /* Check if the whole transfer was completed,
-+ * if no, setup transfer for next portion of data
-+ */
-+ if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ } else if (ep->dwc_ep.sent_zlp) {
-+ /*
-+ * This fragment of code should initiate 0
-+ * length transfer in case if it is queued
-+ * a transfer with size divisible to EPs max
-+ * packet size and with usb_request zero field
-+ * is set, which means that after data is transfered,
-+ * it is also should be transfered
-+ * a 0 length packet at the end. For Slave and
-+ * Buffer DMA modes in this case SW has
-+ * to initiate 2 transfers one with transfer size,
-+ * and the second with 0 size. For Descriptor
-+ * DMA mode SW is able to initiate a transfer,
-+ * which will handle all the packets including
-+ * the last 0 length.
-+ */
-+ ep->dwc_ep.sent_zlp = 0;
-+ dwc_otg_ep_start_zl_transfer(core_if,
-+ &ep->dwc_ep);
-+ } else {
-+ is_last = 1;
-+ }
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "addr %p, %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n",
-+ &out_ep_regs->doeptsiz, ep->dwc_ep.num,
-+ ep->dwc_ep.is_in ? "IN" : "OUT",
-+ ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count,
-+ deptsiz.b.xfersize, deptsiz.b.pktcnt);
-+ }
-+
-+ /* Complete the request */
-+ if (is_last) {
-+#ifdef DWC_UTE_CFI
-+ if (ep->dwc_ep.buff_mode != BM_STANDARD) {
-+ req->actual = ep->dwc_ep.cfi_req_len - byte_count;
-+ } else {
-+#endif
-+ req->actual = ep->dwc_ep.xfer_count;
-+#ifdef DWC_UTE_CFI
-+ }
-+#endif
-+ if (req->dw_align_buf) {
-+ if (!ep->dwc_ep.is_in) {
-+ dwc_memcpy(req->buf, req->dw_align_buf, req->length);
-+ }
-+ DWC_DMA_FREE(dev, req->length, req->dw_align_buf,
-+ req->dw_align_buf_dma);
-+ }
-+
-+ dwc_otg_request_done(ep, req, 0);
-+
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+
-+ /* If there is a request in the queue start it. */
-+ start_next_request(ep);
-+ }
-+}
-+
-+#ifdef DWC_EN_ISOC
-+
-+/**
-+ * This function BNA interrupt for Isochronous EPs
-+ *
-+ */
-+static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ volatile uint32_t *addr;
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ int i;
-+
-+ dma_desc =
-+ dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
-+
-+ if (dwc_ep->is_in) {
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
-+ sts.d32 = dma_desc->status.d32;
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ dma_desc->status.d32 = sts.d32;
-+ }
-+ } else {
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
-+ sts.d32 = dma_desc->status.d32;
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ dma_desc->status.d32 = sts.d32;
-+ }
-+ }
-+
-+ if (dwc_ep->is_in == 0) {
-+ addr =
-+ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->
-+ num]->doepctl;
-+ } else {
-+ addr =
-+ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+ depctl.b.epena = 1;
-+ DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
-+}
-+
-+/**
-+ * This function sets latest iso packet information(non-PTI mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+ dma_addr_t dma_addr;
-+ uint32_t offset;
-+
-+ if (ep->proc_buf_num)
-+ dma_addr = ep->dma_addr1;
-+ else
-+ dma_addr = ep->dma_addr0;
-+
-+ if (ep->is_in) {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->
-+ in_ep_regs[ep->num]->dieptsiz);
-+ offset = ep->data_per_frame;
-+ } else {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[ep->num]->doeptsiz);
-+ offset =
-+ ep->data_per_frame +
-+ (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
-+ }
-+
-+ if (!deptsiz.b.xfersize) {
-+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-+ ep->pkt_info[ep->cur_pkt].offset =
-+ ep->cur_pkt_dma_addr - dma_addr;
-+ ep->pkt_info[ep->cur_pkt].status = 0;
-+ } else {
-+ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
-+ ep->pkt_info[ep->cur_pkt].offset =
-+ ep->cur_pkt_dma_addr - dma_addr;
-+ ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA;
-+ }
-+ ep->cur_pkt_addr += offset;
-+ ep->cur_pkt_dma_addr += offset;
-+ ep->cur_pkt++;
-+}
-+
-+/**
-+ * This function sets latest iso packet information(DDMA mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * dwc_ep)
-+{
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ iso_pkt_info_t *iso_packet;
-+ uint32_t data_per_desc;
-+ uint32_t offset;
-+ int i, j;
-+
-+ iso_packet = dwc_ep->pkt_info;
-+
-+ /** Reinit closed DMA Descriptors*/
-+ /** ISO OUT EP */
-+ if (dwc_ep->is_in == 0) {
-+ dma_desc =
-+ dwc_ep->iso_desc_addr +
-+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+ offset = 0;
-+
-+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
-+ i += dwc_ep->pkt_per_frm) {
-+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->
-+ data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 -
-+ data_per_desc %
-+ 4) : 0;
-+
-+ sts.d32 = dma_desc->status.d32;
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status =
-+ sts.b_iso_out.rxsts +
-+ (sts.b_iso_out.bs ^ BS_DMA_DONE);
-+ if (iso_packet->status) {
-+ iso_packet->status = -DWC_E_NO_DATA;
-+ }
-+
-+ /* Received data length */
-+ if (!sts.b_iso_out.rxbytes) {
-+ iso_packet->length =
-+ data_per_desc -
-+ sts.b_iso_out.rxbytes;
-+ } else {
-+ iso_packet->length =
-+ data_per_desc -
-+ sts.b_iso_out.rxbytes + (4 -
-+ dwc_ep->data_per_frame
-+ % 4);
-+ }
-+
-+ iso_packet->offset = offset;
-+
-+ offset += data_per_desc;
-+ dma_desc++;
-+ iso_packet++;
-+ }
-+ }
-+
-+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
-+
-+ sts.d32 = dma_desc->status.d32;
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status =
-+ sts.b_iso_out.rxsts +
-+ (sts.b_iso_out.bs ^ BS_DMA_DONE);
-+ if (iso_packet->status) {
-+ iso_packet->status = -DWC_E_NO_DATA;
-+ }
-+
-+ /* Received data length */
-+ iso_packet->length =
-+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-+
-+ iso_packet->offset = offset;
-+
-+ offset += data_per_desc;
-+ iso_packet++;
-+ dma_desc++;
-+ }
-+
-+ sts.d32 = dma_desc->status.d32;
-+
-+ /* Write status in iso_packet_decsriptor */
-+ iso_packet->status =
-+ sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE);
-+ if (iso_packet->status) {
-+ iso_packet->status = -DWC_E_NO_DATA;
-+ }
-+ /* Received data length */
-+ if (!sts.b_iso_out.rxbytes) {
-+ iso_packet->length =
-+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
-+ } else {
-+ iso_packet->length =
-+ dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
-+ (4 - dwc_ep->data_per_frame % 4);
-+ }
-+
-+ iso_packet->offset = offset;
-+ } else {
-+/** ISO IN EP */
-+
-+ dma_desc =
-+ dwc_ep->iso_desc_addr +
-+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
-+ sts.d32 = dma_desc->status.d32;
-+
-+ /* Write status in iso packet descriptor */
-+ iso_packet->status =
-+ sts.b_iso_in.txsts +
-+ (sts.b_iso_in.bs ^ BS_DMA_DONE);
-+ if (iso_packet->status != 0) {
-+ iso_packet->status = -DWC_E_NO_DATA;
-+
-+ }
-+ /* Bytes has been transfered */
-+ iso_packet->length =
-+ dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-+
-+ dma_desc++;
-+ iso_packet++;
-+ }
-+
-+ sts.d32 = dma_desc->status.d32;
-+ while (sts.b_iso_in.bs == BS_DMA_BUSY) {
-+ sts.d32 = dma_desc->status.d32;
-+ }
-+
-+ /* Write status in iso packet descriptor ??? do be done with ERROR codes */
-+ iso_packet->status =
-+ sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE);
-+ if (iso_packet->status != 0) {
-+ iso_packet->status = -DWC_E_NO_DATA;
-+ }
-+
-+ /* Bytes has been transfered */
-+ iso_packet->length =
-+ dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
-+ }
-+}
-+
-+/**
-+ * This function reinitialize DMA Descriptors for Isochronous transfer
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP to start the transfer on.
-+ *
-+ */
-+static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
-+{
-+ int i, j;
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ dma_addr_t dma_ad;
-+ volatile uint32_t *addr;
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ uint32_t data_per_desc;
-+
-+ if (dwc_ep->is_in == 0) {
-+ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
-+ } else {
-+ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+
-+ if (dwc_ep->proc_buf_num == 0) {
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr0;
-+ } else {
-+ /** Buffer 1 descriptors setup */
-+ dma_ad = dwc_ep->dma_addr1;
-+ }
-+
-+ /** Reinit closed DMA Descriptors*/
-+ /** ISO OUT EP */
-+ if (dwc_ep->is_in == 0) {
-+ dma_desc =
-+ dwc_ep->iso_desc_addr +
-+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ sts.b_iso_out.bs = BS_HOST_READY;
-+ sts.b_iso_out.rxsts = 0;
-+ sts.b_iso_out.l = 0;
-+ sts.b_iso_out.sp = 0;
-+ sts.b_iso_out.ioc = 0;
-+ sts.b_iso_out.pid = 0;
-+ sts.b_iso_out.framenum = 0;
-+
-+ for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
-+ i += dwc_ep->pkt_per_frm) {
-+ for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->
-+ data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 -
-+ data_per_desc %
-+ 4) : 0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ dma_ad += data_per_desc;
-+ dma_desc++;
-+ }
-+ }
-+
-+ for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
-+
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ dma_desc++;
-+ dma_ad += data_per_desc;
-+ }
-+
-+ sts.b_iso_out.ioc = 1;
-+ sts.b_iso_out.l = dwc_ep->proc_buf_num;
-+
-+ data_per_desc =
-+ ((j + 1) * dwc_ep->maxpacket >
-+ dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
-+ j * dwc_ep->maxpacket : dwc_ep->maxpacket;
-+ data_per_desc +=
-+ (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
-+ sts.b_iso_out.rxbytes = data_per_desc;
-+
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+ } else {
-+/** ISO IN EP */
-+
-+ dma_desc =
-+ dwc_ep->iso_desc_addr +
-+ dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
-+
-+ sts.b_iso_in.bs = BS_HOST_READY;
-+ sts.b_iso_in.txsts = 0;
-+ sts.b_iso_in.sp = 0;
-+ sts.b_iso_in.ioc = 0;
-+ sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
-+ sts.b_iso_in.framenum = dwc_ep->next_frame;
-+ sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
-+ sts.b_iso_in.l = 0;
-+
-+ for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ sts.b_iso_in.framenum += dwc_ep->bInterval;
-+ dma_ad += dwc_ep->data_per_frame;
-+ dma_desc++;
-+ }
-+
-+ sts.b_iso_in.ioc = 1;
-+ sts.b_iso_in.l = dwc_ep->proc_buf_num;
-+
-+ dma_desc->buf = dma_ad;
-+ dma_desc->status.d32 = sts.d32;
-+
-+ dwc_ep->next_frame =
-+ sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
-+ }
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+}
-+
-+/**
-+ * This function is to handle Iso EP transfer complete interrupt
-+ * in case Iso out packet was dropped
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param dwc_ep The EP for wihich transfer complete was asserted
-+ *
-+ */
-+static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if,
-+ dwc_ep_t * dwc_ep)
-+{
-+ uint32_t dma_addr;
-+ uint32_t drp_pkt;
-+ uint32_t drp_pkt_cnt;
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ int i;
-+
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[dwc_ep->num]->doeptsiz);
-+
-+ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
-+ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
-+
-+ /* Setting dropped packets status */
-+ for (i = 0; i < drp_pkt_cnt; ++i) {
-+ dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA;
-+ drp_pkt++;
-+ deptsiz.b.pktcnt--;
-+ }
-+
-+ if (deptsiz.b.pktcnt > 0) {
-+ deptsiz.b.xfersize =
-+ dwc_ep->xfer_len - (dwc_ep->pkt_cnt -
-+ deptsiz.b.pktcnt) * dwc_ep->maxpacket;
-+ } else {
-+ deptsiz.b.xfersize = 0;
-+ deptsiz.b.pktcnt = 0;
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz,
-+ deptsiz.d32);
-+
-+ if (deptsiz.b.pktcnt > 0) {
-+ if (dwc_ep->proc_buf_num) {
-+ dma_addr =
-+ dwc_ep->dma_addr1 + dwc_ep->xfer_len -
-+ deptsiz.b.xfersize;
-+ } else {
-+ dma_addr =
-+ dwc_ep->dma_addr0 + dwc_ep->xfer_len -
-+ deptsiz.b.xfersize;;
-+ }
-+
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
-+
-+ /** Re-enable endpoint, clear nak */
-+ depctl.d32 = 0;
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+
-+ DWC_MODIFY_REG32(&core_if->dev_if->
-+ out_ep_regs[dwc_ep->num]->doepctl, depctl.d32,
-+ depctl.d32);
-+ return 0;
-+ } else {
-+ return 1;
-+ }
-+}
-+
-+/**
-+ * This function sets iso packets information(PTI mode)
-+ *
-+ * @param core_if Programming view of DWC_otg controller.
-+ * @param ep The EP to start the transfer on.
-+ *
-+ */
-+static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
-+{
-+ int i, j;
-+ dma_addr_t dma_ad;
-+ iso_pkt_info_t *packet_info = ep->pkt_info;
-+ uint32_t offset;
-+ uint32_t frame_data;
-+ deptsiz_data_t deptsiz;
-+
-+ if (ep->proc_buf_num == 0) {
-+ /** Buffer 0 descriptors setup */
-+ dma_ad = ep->dma_addr0;
-+ } else {
-+ /** Buffer 1 descriptors setup */
-+ dma_ad = ep->dma_addr1;
-+ }
-+
-+ if (ep->is_in) {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
-+ dieptsiz);
-+ } else {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
-+ doeptsiz);
-+ }
-+
-+ if (!deptsiz.b.xfersize) {
-+ offset = 0;
-+ for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) {
-+ frame_data = ep->data_per_frame;
-+ for (j = 0; j < ep->pkt_per_frm; ++j) {
-+
-+ /* Packet status - is not set as initially
-+ * it is set to 0 and if packet was sent
-+ successfully, status field will remain 0*/
-+
-+ /* Bytes has been transfered */
-+ packet_info->length =
-+ (ep->maxpacket <
-+ frame_data) ? ep->maxpacket : frame_data;
-+
-+ /* Received packet offset */
-+ packet_info->offset = offset;
-+ offset += packet_info->length;
-+ frame_data -= packet_info->length;
-+
-+ packet_info++;
-+ }
-+ }
-+ return 1;
-+ } else {
-+ /* This is a workaround for in case of Transfer Complete with
-+ * PktDrpSts interrupts merging - in this case Transfer complete
-+ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
-+ * set and with DOEPTSIZ register non zero. Investigations showed,
-+ * that this happens when Out packet is dropped, but because of
-+ * interrupts merging during first interrupt handling PktDrpSts
-+ * bit is cleared and for next merged interrupts it is not reset.
-+ * In this case SW hadles the interrupt as if PktDrpSts bit is set.
-+ */
-+ if (ep->is_in) {
-+ return 1;
-+ } else {
-+ return handle_iso_out_pkt_dropped(core_if, ep);
-+ }
-+ }
-+}
-+
-+/**
-+ * This function is to handle Iso EP transfer complete interrupt
-+ *
-+ * @param pcd The PCD
-+ * @param ep The EP for which transfer complete was asserted
-+ *
-+ */
-+static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ uint8_t is_last = 0;
-+
-+ if (ep->dwc_ep.next_frame == 0xffffffff) {
-+ DWC_WARN("Next frame is not set!\n");
-+ return;
-+ }
-+
-+ if (core_if->dma_enable) {
-+ if (core_if->dma_desc_enable) {
-+ set_ddma_iso_pkts_info(core_if, dwc_ep);
-+ reinit_ddma_iso_xfer(core_if, dwc_ep);
-+ is_last = 1;
-+ } else {
-+ if (core_if->pti_enh_enable) {
-+ if (set_iso_pkts_info(core_if, dwc_ep)) {
-+ dwc_ep->proc_buf_num =
-+ (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ dwc_otg_iso_ep_start_buf_transfer
-+ (core_if, dwc_ep);
-+ is_last = 1;
-+ }
-+ } else {
-+ set_current_pkt_info(core_if, dwc_ep);
-+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ is_last = 1;
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num =
-+ (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ if (dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr =
-+ dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr =
-+ dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr =
-+ dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr =
-+ dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+ dwc_otg_iso_ep_start_frm_transfer(core_if,
-+ dwc_ep);
-+ }
-+ }
-+ } else {
-+ set_current_pkt_info(core_if, dwc_ep);
-+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ is_last = 1;
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+ if (dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
-+ }
-+ if (is_last)
-+ dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle);
-+}
-+#endif /* DWC_EN_ISOC */
-+
-+/**
-+ * This function handle BNA interrupt for Non Isochronous EPs
-+ *
-+ */
-+static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep)
-+{
-+ dwc_ep_t *dwc_ep = &ep->dwc_ep;
-+ volatile uint32_t *addr;
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dwc_otg_pcd_t *pcd = ep->pcd;
-+ dwc_otg_dev_dma_desc_t *dma_desc;
-+ dev_dma_desc_sts_t sts = {.d32 = 0 };
-+ dwc_otg_core_if_t *core_if = ep->pcd->core_if;
-+ int i, start;
-+
-+ if (!dwc_ep->desc_cnt)
-+ DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num,
-+ (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt);
-+
-+ if (core_if->core_params->cont_on_bna && !dwc_ep->is_in
-+ && dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) {
-+ uint32_t doepdma;
-+ dwc_otg_dev_out_ep_regs_t *out_regs =
-+ core_if->dev_if->out_ep_regs[dwc_ep->num];
-+ doepdma = DWC_READ_REG32(&(out_regs->doepdma));
-+ start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t);
-+ dma_desc = &(dwc_ep->desc_addr[start]);
-+ } else {
-+ start = 0;
-+ dma_desc = dwc_ep->desc_addr;
-+ }
-+
-+
-+ for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
-+ sts.d32 = dma_desc->status.d32;
-+ sts.b.bs = BS_HOST_READY;
-+ dma_desc->status.d32 = sts.d32;
-+ }
-+
-+ if (dwc_ep->is_in == 0) {
-+ addr =
-+ &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->
-+ doepctl;
-+ } else {
-+ addr =
-+ &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
-+ }
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+ DWC_MODIFY_REG32(addr, 0, depctl.d32);
-+}
-+
-+/**
-+ * This function handles EP0 Control transfers.
-+ *
-+ * The state of the control transfers are tracked in
-+ * <code>ep0state</code>.
-+ */
-+static void handle_ep0(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
-+ dev_dma_desc_sts_t desc_sts;
-+ deptsiz0_data_t deptsiz;
-+ uint32_t byte_count;
-+
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-+ print_ep0_state(pcd);
-+#endif
-+
-+// DWC_PRINTF("HANDLE EP0\n");
-+
-+ switch (pcd->ep0state) {
-+ case EP0_DISCONNECT:
-+ break;
-+
-+ case EP0_IDLE:
-+ pcd->request_config = 0;
-+
-+ pcd_setup(pcd);
-+ break;
-+
-+ case EP0_IN_DATA_PHASE:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
-+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
-+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-+#endif
-+
-+ if (core_if->dma_enable != 0) {
-+ /*
-+ * For EP0 we can only program 1 packet at a time so we
-+ * need to do the make calculations after each complete.
-+ * Call write_packet to make the calculations, as in
-+ * slave mode, and use those values to determine if we
-+ * can complete.
-+ */
-+ if (core_if->dma_desc_enable == 0) {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->
-+ dev_if->in_ep_regs[0]->
-+ dieptsiz);
-+ byte_count =
-+ ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
-+ } else {
-+ desc_sts =
-+ core_if->dev_if->in_desc_addr->status;
-+ byte_count =
-+ ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
-+ }
-+ ep0->dwc_ep.xfer_count += byte_count;
-+ ep0->dwc_ep.xfer_buff += byte_count;
-+ ep0->dwc_ep.dma_addr += byte_count;
-+ }
-+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
-+ &ep0->dwc_ep);
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ } else if (ep0->dwc_ep.sent_zlp) {
-+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
-+ &ep0->dwc_ep);
-+ ep0->dwc_ep.sent_zlp = 0;
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
-+ } else {
-+ ep0_complete_request(ep0);
-+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-+ }
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
-+ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
-+ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
-+#endif
-+ if (core_if->dma_enable != 0) {
-+ if (core_if->dma_desc_enable == 0) {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->
-+ dev_if->out_ep_regs[0]->
-+ doeptsiz);
-+ byte_count =
-+ ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
-+ } else {
-+ desc_sts =
-+ core_if->dev_if->out_desc_addr->status;
-+ byte_count =
-+ ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
-+ }
-+ ep0->dwc_ep.xfer_count += byte_count;
-+ ep0->dwc_ep.xfer_buff += byte_count;
-+ ep0->dwc_ep.dma_addr += byte_count;
-+ }
-+ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
-+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
-+ &ep0->dwc_ep);
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
-+ } else if (ep0->dwc_ep.sent_zlp) {
-+ dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
-+ &ep0->dwc_ep);
-+ ep0->dwc_ep.sent_zlp = 0;
-+ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
-+ } else {
-+ ep0_complete_request(ep0);
-+ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
-+ }
-+ break;
-+
-+ case EP0_IN_STATUS_PHASE:
-+ case EP0_OUT_STATUS_PHASE:
-+ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
-+ ep0_complete_request(ep0);
-+ pcd->ep0state = EP0_IDLE;
-+ ep0->stopped = 1;
-+ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */
-+
-+ /* Prepare for more SETUP Packets */
-+ if (core_if->dma_enable) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+ break;
-+
-+ case EP0_STALL:
-+ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
-+ break;
-+ }
-+#ifdef DEBUG_EP0
-+ print_ep0_state(pcd);
-+#endif
-+}
-+
-+/**
-+ * Restart transfer
-+ */
-+static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if;
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t dieptsiz = {.d32 = 0 };
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+#ifdef DWC_EN_ISOC
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ return;
-+ }
-+#endif /* DWC_EN_ISOC */
-+
-+ core_if = GET_CORE_IF(pcd);
-+ dev_if = core_if->dev_if;
-+
-+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-+
-+ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x"
-+ " stopped=%d\n", ep->dwc_ep.xfer_buff,
-+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped);
-+ /*
-+ * If xfersize is 0 and pktcnt in not 0, resend the last packet.
-+ */
-+ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
-+ ep->dwc_ep.start_xfer_buff != 0) {
-+ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
-+ ep->dwc_ep.xfer_count = 0;
-+ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
-+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-+ } else {
-+ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
-+ /* convert packet size to dwords. */
-+ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
-+ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
-+ }
-+ ep->stopped = 0;
-+ DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x "
-+ "xfer_len=%0x stopped=%d\n",
-+ ep->dwc_ep.xfer_buff,
-+ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len,
-+ ep->stopped);
-+ if (epnum == 0) {
-+ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
-+ } else {
-+ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
-+ }
-+ }
-+}
-+
-+/*
-+ * This function create new nextep sequnce based on Learn Queue.
-+ *
-+ * @param core_if Programming view of DWC_otg controller
-+ */
-+void predict_nextep_seq( dwc_otg_core_if_t * core_if)
-+{
-+ dwc_otg_device_global_regs_t *dev_global_regs =
-+ core_if->dev_if->dev_global_regs;
-+ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
-+ /* Number of Token Queue Registers */
-+ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
-+ dtknq1_data_t dtknqr1;
-+ uint32_t in_tkn_epnums[4];
-+ uint8_t seqnum[MAX_EPS_CHANNELS];
-+ uint8_t intkn_seq[TOKEN_Q_DEPTH];
-+ grstctl_t resetctl = {.d32 = 0 };
-+ uint8_t temp;
-+ int ndx = 0;
-+ int start = 0;
-+ int end = 0;
-+ int sort_done = 0;
-+ int i = 0;
-+ volatile uint32_t *addr = &dev_global_regs->dtknqr1;
-+
-+
-+ DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
-+
-+ /* Read the DTKNQ Registers */
-+ for (i = 0; i < DTKNQ_REG_CNT; i++) {
-+ in_tkn_epnums[i] = DWC_READ_REG32(addr);
-+ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
-+ in_tkn_epnums[i]);
-+ if (addr == &dev_global_regs->dvbusdis) {
-+ addr = &dev_global_regs->dtknqr3_dthrctl;
-+ } else {
-+ ++addr;
-+ }
-+
-+ }
-+
-+ /* Copy the DTKNQR1 data to the bit field. */
-+ dtknqr1.d32 = in_tkn_epnums[0];
-+ if (dtknqr1.b.wrap_bit) {
-+ ndx = dtknqr1.b.intknwptr;
-+ end = ndx -1;
-+ if (end < 0)
-+ end = TOKEN_Q_DEPTH -1;
-+ } else {
-+ ndx = 0;
-+ end = dtknqr1.b.intknwptr -1;
-+ if (end < 0)
-+ end = 0;
-+ }
-+ start = ndx;
-+
-+ /* Fill seqnum[] by initial values: EP number + 31 */
-+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
-+ seqnum[i] = i +31;
-+ }
-+
-+ /* Fill intkn_seq[] from in_tkn_epnums[0] */
-+ for (i=0; i < 6; i++)
-+ intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf;
-+
-+ if (TOKEN_Q_DEPTH > 6) {
-+ /* Fill intkn_seq[] from in_tkn_epnums[1] */
-+ for (i=6; i < 14; i++)
-+ intkn_seq[i] =
-+ (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf;
-+ }
-+
-+ if (TOKEN_Q_DEPTH > 14) {
-+ /* Fill intkn_seq[] from in_tkn_epnums[1] */
-+ for (i=14; i < 22; i++)
-+ intkn_seq[i] =
-+ (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf;
-+ }
-+
-+ if (TOKEN_Q_DEPTH > 22) {
-+ /* Fill intkn_seq[] from in_tkn_epnums[1] */
-+ for (i=22; i < 30; i++)
-+ intkn_seq[i] =
-+ (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__,
-+ start, end);
-+ for (i=0; i<TOKEN_Q_DEPTH; i++)
-+ DWC_DEBUGPL(DBG_PCDV,"%d\n", intkn_seq[i]);
-+
-+ /* Update seqnum based on intkn_seq[] */
-+ i = 0;
-+ do {
-+ seqnum[intkn_seq[ndx]] = i;
-+ ndx++;
-+ i++;
-+ if (ndx == TOKEN_Q_DEPTH)
-+ ndx = 0;
-+ } while ( i < TOKEN_Q_DEPTH );
-+
-+ /* Mark non active EP's in seqnum[] by 0xff */
-+ for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
-+ if (core_if->nextep_seq[i] == 0xff )
-+ seqnum[i] = 0xff;
-+ }
-+
-+ /* Sort seqnum[] */
-+ sort_done = 0;
-+ while (!sort_done) {
-+ sort_done = 1;
-+ for (i=0; i<core_if->dev_if->num_in_eps; i++) {
-+ if (seqnum[i] > seqnum[i+1]) {
-+ temp = seqnum[i];
-+ seqnum[i] = seqnum[i+1];
-+ seqnum[i+1] = temp;
-+ sort_done = 0;
-+ }
-+ }
-+ }
-+
-+ ndx = start + seqnum[0];
-+ if (ndx >= TOKEN_Q_DEPTH)
-+ ndx = ndx % TOKEN_Q_DEPTH;
-+ core_if->first_in_nextep_seq = intkn_seq[ndx];
-+
-+ /* Update seqnum[] by EP numbers */
-+ for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
-+ ndx = start + i;
-+ if (seqnum[i] < 31) {
-+ ndx = start + seqnum[i];
-+ if (ndx >= TOKEN_Q_DEPTH)
-+ ndx = ndx % TOKEN_Q_DEPTH;
-+ seqnum[i] = intkn_seq[ndx];
-+ } else {
-+ if (seqnum[i] < 0xff) {
-+ seqnum[i] = seqnum[i] - 31;
-+ } else {
-+ break;
-+ }
-+ }
-+ }
-+
-+ /* Update nextep_seq[] based on seqnum[] */
-+ for (i=0; i<core_if->dev_if->num_in_eps; i++) {
-+ if (seqnum[i] != 0xff) {
-+ if (seqnum[i+1] != 0xff) {
-+ core_if->nextep_seq[seqnum[i]] = seqnum[i+1];
-+ } else {
-+ core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq;
-+ break;
-+ }
-+ } else {
-+ break;
-+ }
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
-+ __func__, core_if->first_in_nextep_seq);
-+ for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
-+ DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]);
-+ }
-+
-+ /* Flush the Learning Queue */
-+ resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl);
-+ resetctl.b.intknqflsh = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
-+
-+
-+}
-+
-+/**
-+ * handle the IN EP disable interrupt.
-+ */
-+static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd,
-+ const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ deptsiz_data_t dieptsiz = {.d32 = 0 };
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ gintmsk_data_t gintmsk_data;
-+ depctl_data_t depctl;
-+ uint32_t diepdma;
-+ uint32_t remain_to_transfer = 0;
-+ uint8_t i;
-+ uint32_t xfer_size;
-+
-+ ep = get_in_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-+ complete_ep(ep);
-+ return;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum,
-+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl));
-+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
-+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
-+
-+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-+ dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
-+
-+ if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) {
-+ if (ep->stopped) {
-+ if (core_if->en_multiple_tx_fifo)
-+ /* Flush the Tx FIFO */
-+ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
-+ /* Clear the Global IN NP NAK */
-+ dctl.d32 = 0;
-+ dctl.b.cgnpinnak = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+ /* Restart the transaction */
-+ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
-+ restart_transfer(pcd, epnum);
-+ }
-+ } else {
-+ /* Restart the transaction */
-+ if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
-+ restart_transfer(pcd, epnum);
-+ }
-+ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
-+ }
-+ return;
-+ }
-+
-+ if (core_if->start_predict > 2) { // NP IN EP
-+ core_if->start_predict--;
-+ return;
-+ }
-+
-+ core_if->start_predict--;
-+
-+ if (core_if->start_predict == 1) { // All NP IN Ep's disabled now
-+
-+ predict_nextep_seq(core_if);
-+
-+ /* Update all active IN EP's NextEP field based of nextep_seq[] */
-+ for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) {
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (core_if->nextep_seq[i] != 0xff) { // Active NP IN EP
-+ depctl.b.nextep = core_if->nextep_seq[i];
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-+ }
-+ }
-+ /* Flush Shared NP TxFIFO */
-+ dwc_otg_flush_tx_fifo(core_if, 0);
-+ /* Rewind buffers */
-+ if (!core_if->dma_desc_enable) {
-+ i = core_if->first_in_nextep_seq;
-+ do {
-+ ep = get_in_ep(pcd, i);
-+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
-+ xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count;
-+ if (xfer_size > ep->dwc_ep.maxxfer)
-+ xfer_size = ep->dwc_ep.maxxfer;
-+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (dieptsiz.b.pktcnt != 0) {
-+ if (xfer_size == 0) {
-+ remain_to_transfer = 0;
-+ } else {
-+ if ((xfer_size % ep->dwc_ep.maxpacket) == 0) {
-+ remain_to_transfer =
-+ dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket;
-+ } else {
-+ remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket)
-+ + (xfer_size % ep->dwc_ep.maxpacket);
-+ }
-+ }
-+ diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma);
-+ dieptsiz.b.xfersize = remain_to_transfer;
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32);
-+ diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer);
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma);
-+ }
-+ i = core_if->nextep_seq[i];
-+ } while (i != core_if->first_in_nextep_seq);
-+ } else { // dma_desc_enable
-+ DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__);
-+ }
-+
-+ /* Restart transfers in predicted sequences */
-+ i = core_if->first_in_nextep_seq;
-+ do {
-+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
-+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (dieptsiz.b.pktcnt != 0) {
-+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ depctl.b.epena = 1;
-+ depctl.b.cnak = 1;
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
-+ }
-+ i = core_if->nextep_seq[i];
-+ } while (i != core_if->first_in_nextep_seq);
-+
-+ /* Clear the global non-periodic IN NAK handshake */
-+ dctl.d32 = 0;
-+ dctl.b.cgnpinnak = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+
-+ /* Unmask EP Mismatch interrupt */
-+ gintmsk_data.d32 = 0;
-+ gintmsk_data.b.epmismatch = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32);
-+
-+ core_if->start_predict = 0;
-+
-+ }
-+}
-+
-+/**
-+ * Handler for the IN EP timeout handshake interrupt.
-+ */
-+static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd,
-+ const uint32_t epnum)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+
-+#ifdef DEBUG
-+ deptsiz_data_t dieptsiz = {.d32 = 0 };
-+ uint32_t num = 0;
-+#endif
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dwc_otg_pcd_ep_t *ep;
-+
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ ep = get_in_ep(pcd, epnum);
-+
-+ /* Disable the NP Tx Fifo Empty Interrrupt */
-+ if (!core_if->dma_enable) {
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+ }
-+ /** @todo NGS Check EP type.
-+ * Implement for Periodic EPs */
-+ /*
-+ * Non-periodic EP
-+ */
-+ /* Enable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.ginnakeff = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
-+
-+ /* Set Global IN NAK */
-+ dctl.b.sgnpinnak = 1;
-+ DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
-+
-+ ep->stopped = 1;
-+
-+#ifdef DEBUG
-+ dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz);
-+ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
-+ dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
-+#endif
-+
-+#ifdef DISABLE_PERIODIC_EP
-+ /*
-+ * Set the NAK bit for this EP to
-+ * start the disable process.
-+ */
-+ diepctl.d32 = 0;
-+ diepctl.b.snak = 1;
-+ DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32,
-+ diepctl.d32);
-+ ep->disabling = 1;
-+ ep->stopped = 1;
-+#endif
-+}
-+
-+/**
-+ * Handler for the IN EP NAK interrupt.
-+ */
-+static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t *core_if;
-+ diepmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nak = 1;
-+
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ diepeachintmsk[epnum], intr_mask.d32, 0);
-+ } else {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP Babble interrupt.
-+ */
-+static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t *core_if;
-+ doepmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
-+ "OUT EP Babble");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.babble = 1;
-+
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ doepeachintmsk[epnum], intr_mask.d32, 0);
-+ } else {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP NAK interrupt.
-+ */
-+static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t *core_if;
-+ doepmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nak = 1;
-+
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ doepeachintmsk[epnum], intr_mask.d32, 0);
-+ } else {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * Handler for the OUT EP NYET interrupt.
-+ */
-+static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd,
-+ const uint32_t epnum)
-+{
-+ /** @todo implement ISR */
-+ dwc_otg_core_if_t *core_if;
-+ doepmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
-+ core_if = GET_CORE_IF(pcd);
-+ intr_mask.b.nyet = 1;
-+
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
-+ doepeachintmsk[epnum], intr_mask.d32, 0);
-+ } else {
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ intr_mask.d32, 0);
-+ }
-+
-+ return 1;
-+}
-+
-+/**
-+ * This interrupt indicates that an IN EP has a pending Interrupt.
-+ * The sequence for handling the IN EP interrupt is shown below:
-+ * -# Read the Device All Endpoint Interrupt register
-+ * -# Repeat the following for each IN EP interrupt bit set (from
-+ * LSB to MSB).
-+ * -# Read the Device Endpoint Interrupt (DIEPINTn) register
-+ * -# If "Transfer Complete" call the request complete function
-+ * -# If "Endpoint Disabled" complete the EP disable procedure.
-+ * -# If "AHB Error Interrupt" log error
-+ * -# If "Time-out Handshake" log error
-+ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx
-+ * FIFO.
-+ * -# If "IN Token EP Mismatch" (disable, this is handled by EP
-+ * Mismatch Interrupt)
-+ */
-+static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd)
-+{
-+#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
-+do { \
-+ diepint_data_t diepint = {.d32=0}; \
-+ diepint.b.__intr = 1; \
-+ DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
-+ diepint.d32); \
-+} while (0)
-+
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ dwc_otg_dev_if_t *dev_if = core_if->dev_if;
-+ diepint_data_t diepint = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ uint32_t ep_intr;
-+ uint32_t epnum = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
-+
-+ /* Read in the device interrupt bits */
-+ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
-+
-+ /* Service the Device IN interrupts for each endpoint */
-+ while (ep_intr) {
-+ if (ep_intr & 0x1) {
-+ uint32_t empty_msk;
-+ /* Get EP pointer */
-+ ep = get_in_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
-+ empty_msk =
-+ DWC_READ_REG32(&dev_if->
-+ dev_global_regs->dtknqr4_fifoemptymsk);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n",
-+ epnum, empty_msk, depctl.d32);
-+
-+ DWC_DEBUGPL(DBG_PCD,
-+ "EP%d-%s: type=%d, mps=%d\n",
-+ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
-+ dwc_ep->type, dwc_ep->maxpacket);
-+
-+ diepint.d32 =
-+ dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
-+
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP %d Interrupt Register - 0x%x\n", epnum,
-+ diepint.d32);
-+ /* Transfer complete */
-+ if (diepint.b.xfercompl) {
-+ /* Disable the NP Tx FIFO Empty
-+ * Interrupt */
-+ if (core_if->en_multiple_tx_fifo == 0) {
-+ intr_mask.b.nptxfempty = 1;
-+ DWC_MODIFY_REG32
-+ (&core_if->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+ } else {
-+ /* Disable the Tx FIFO Empty Interrupt for this EP */
-+ uint32_t fifoemptymsk =
-+ 0x1 << dwc_ep->num;
-+ DWC_MODIFY_REG32(&core_if->
-+ dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
-+ fifoemptymsk, 0);
-+ }
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if, epnum, xfercompl);
-+
-+ /* Complete the transfer */
-+ if (epnum == 0) {
-+ handle_ep0(pcd);
-+ }
-+#ifdef DWC_EN_ISOC
-+ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (!ep->stopped)
-+ complete_iso_ep(pcd, ep);
-+ }
-+#endif /* DWC_EN_ISOC */
-+#ifdef DWC_UTE_PER_IO
-+ else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (!ep->stopped)
-+ complete_xiso_ep(ep);
-+ }
-+#endif /* DWC_UTE_PER_IO */
-+ else {
-+ if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC &&
-+ dwc_ep->bInterval > 1) {
-+ dwc_ep->frame_num += dwc_ep->bInterval;
-+ if (dwc_ep->frame_num > 0x3FFF)
-+ {
-+ dwc_ep->frm_overrun = 1;
-+ dwc_ep->frame_num &= 0x3FFF;
-+ } else
-+ dwc_ep->frm_overrun = 0;
-+ }
-+ complete_ep(ep);
-+ if(diepint.b.nak)
-+ CLEAR_IN_EP_INTR(core_if, epnum, nak);
-+ }
-+ }
-+ /* Endpoint disable */
-+ if (diepint.b.epdisabled) {
-+ DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n",
-+ epnum);
-+ handle_in_ep_disable_intr(pcd, epnum);
-+
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if, epnum, epdisabled);
-+ }
-+ /* AHB Error */
-+ if (diepint.b.ahberr) {
-+ DWC_ERROR("EP%d IN AHB Error\n", epnum);
-+ /* Clear the bit in DIEPINTn for this interrupt */
-+ CLEAR_IN_EP_INTR(core_if, epnum, ahberr);
-+ }
-+ /* TimeOUT Handshake (non-ISOC IN EPs) */
-+ if (diepint.b.timeout) {
-+ DWC_ERROR("EP%d IN Time-out\n", epnum);
-+ handle_in_ep_timeout_intr(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if, epnum, timeout);
-+ }
-+ /** IN Token received with TxF Empty */
-+ if (diepint.b.intktxfemp) {
-+ DWC_DEBUGPL(DBG_ANY,
-+ "EP%d IN TKN TxFifo Empty\n",
-+ epnum);
-+ if (!ep->stopped && epnum != 0) {
-+
-+ diepmsk_data_t diepmsk = {.d32 = 0 };
-+ diepmsk.b.intktxfemp = 1;
-+
-+ if (core_if->multiproc_int_enable) {
-+ DWC_MODIFY_REG32
-+ (&dev_if->dev_global_regs->diepeachintmsk
-+ [epnum], diepmsk.d32, 0);
-+ } else {
-+ DWC_MODIFY_REG32
-+ (&dev_if->dev_global_regs->diepmsk,
-+ diepmsk.d32, 0);
-+ }
-+ } else if (core_if->dma_desc_enable
-+ && epnum == 0
-+ && pcd->ep0state ==
-+ EP0_OUT_STATUS_PHASE) {
-+ // EP0 IN set STALL
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs
-+ [epnum]->diepctl);
-+
-+ /* set the disable and stall bits */
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ }
-+ depctl.b.stall = 1;
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs
-+ [epnum]->diepctl,
-+ depctl.d32);
-+ }
-+ CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp);
-+ }
-+ /** IN Token Received with EP mismatch */
-+ if (diepint.b.intknepmis) {
-+ DWC_DEBUGPL(DBG_ANY,
-+ "EP%d IN TKN EP Mismatch\n", epnum);
-+ CLEAR_IN_EP_INTR(core_if, epnum, intknepmis);
-+ }
-+ /** IN Endpoint NAK Effective */
-+ if (diepint.b.inepnakeff) {
-+ DWC_DEBUGPL(DBG_ANY,
-+ "EP%d IN EP NAK Effective\n",
-+ epnum);
-+ /* Periodic EP */
-+ if (ep->disabling) {
-+ depctl.d32 = 0;
-+ depctl.b.snak = 1;
-+ depctl.b.epdis = 1;
-+ DWC_MODIFY_REG32(&dev_if->in_ep_regs
-+ [epnum]->diepctl,
-+ depctl.d32,
-+ depctl.d32);
-+ }
-+ CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff);
-+
-+ }
-+
-+ /** IN EP Tx FIFO Empty Intr */
-+ if (diepint.b.emptyintr) {
-+ DWC_DEBUGPL(DBG_ANY,
-+ "EP%d Tx FIFO Empty Intr \n",
-+ epnum);
-+ write_empty_tx_fifo(pcd, epnum);
-+
-+ CLEAR_IN_EP_INTR(core_if, epnum, emptyintr);
-+
-+ }
-+
-+ /** IN EP BNA Intr */
-+ if (diepint.b.bna) {
-+ CLEAR_IN_EP_INTR(core_if, epnum, bna);
-+ if (core_if->dma_desc_enable) {
-+#ifdef DWC_EN_ISOC
-+ if (dwc_ep->type ==
-+ DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This checking is performed to prevent first "false" BNA
-+ * handling occuring right after reconnect
-+ */
-+ if (dwc_ep->next_frame !=
-+ 0xffffffff)
-+ dwc_otg_pcd_handle_iso_bna(ep);
-+ } else
-+#endif /* DWC_EN_ISOC */
-+ {
-+ dwc_otg_pcd_handle_noniso_bna(ep);
-+ }
-+ }
-+ }
-+ /* NAK Interrutp */
-+ if (diepint.b.nak) {
-+ DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n",
-+ epnum);
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ depctl_data_t depctl;
-+ if (ep->dwc_ep.frame_num == 0xFFFFFFFF) {
-+ ep->dwc_ep.frame_num = core_if->frame_num;
-+ if (ep->dwc_ep.bInterval > 1) {
-+ depctl.d32 = 0;
-+ depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
-+ if (ep->dwc_ep.frame_num & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ depctl.b.setd0pid = 0;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ depctl.b.setd1pid = 0;
-+ }
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
-+ }
-+ start_next_request(ep);
-+ }
-+ ep->dwc_ep.frame_num += ep->dwc_ep.bInterval;
-+ if (dwc_ep->frame_num > 0x3FFF) {
-+ dwc_ep->frm_overrun = 1;
-+ dwc_ep->frame_num &= 0x3FFF;
-+ } else
-+ dwc_ep->frm_overrun = 0;
-+ }
-+
-+ CLEAR_IN_EP_INTR(core_if, epnum, nak);
-+ }
-+ }
-+ epnum++;
-+ ep_intr >>= 1;
-+ }
-+
-+ return 1;
-+#undef CLEAR_IN_EP_INTR
-+}
-+
-+/**
-+ * This interrupt indicates that an OUT EP has a pending Interrupt.
-+ * The sequence for handling the OUT EP interrupt is shown below:
-+ * -# Read the Device All Endpoint Interrupt register
-+ * -# Repeat the following for each OUT EP interrupt bit set (from
-+ * LSB to MSB).
-+ * -# Read the Device Endpoint Interrupt (DOEPINTn) register
-+ * -# If "Transfer Complete" call the request complete function
-+ * -# If "Endpoint Disabled" complete the EP disable procedure.
-+ * -# If "AHB Error Interrupt" log error
-+ * -# If "Setup Phase Done" process Setup Packet (See Standard USB
-+ * Command Processing)
-+ */
-+static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd)
-+{
-+#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
-+do { \
-+ doepint_data_t doepint = {.d32=0}; \
-+ doepint.b.__intr = 1; \
-+ DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
-+ doepint.d32); \
-+} while (0)
-+
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ uint32_t ep_intr;
-+ doepint_data_t doepint = {.d32 = 0 };
-+ uint32_t epnum = 0;
-+ dwc_otg_pcd_ep_t *ep;
-+ dwc_ep_t *dwc_ep;
-+ dctl_data_t dctl = {.d32 = 0 };
-+ gintmsk_data_t gintmsk = {.d32 = 0 };
-+
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
-+
-+ /* Read in the device interrupt bits */
-+ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
-+
-+ while (ep_intr) {
-+ if (ep_intr & 0x1) {
-+ /* Get EP pointer */
-+ ep = get_out_ep(pcd, epnum);
-+ dwc_ep = &ep->dwc_ep;
-+
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP%d-%s: type=%d, mps=%d\n",
-+ dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
-+ dwc_ep->type, dwc_ep->maxpacket);
-+#endif
-+ doepint.d32 =
-+ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
-+ /* Moved this interrupt upper due to core deffect of asserting
-+ * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */
-+ if (doepint.b.stsphsercvd) {
-+ deptsiz0_data_t deptsiz;
-+ CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd);
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[0]->doeptsiz);
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a
-+ && core_if->dma_enable
-+ && core_if->dma_desc_enable == 0
-+ && doepint.b.xfercompl
-+ && deptsiz.b.xfersize == 24) {
-+ CLEAR_OUT_EP_INTR(core_if, epnum,
-+ xfercompl);
-+ doepint.b.xfercompl = 0;
-+ ep0_out_start(core_if, pcd);
-+ }
-+ if ((core_if->dma_desc_enable) ||
-+ (core_if->dma_enable
-+ && core_if->snpsid >=
-+ OTG_CORE_REV_3_00a)) {
-+ do_setup_in_status_phase(pcd);
-+ }
-+ }
-+ /* Transfer complete */
-+ if (doepint.b.xfercompl) {
-+
-+ if (epnum == 0) {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
-+ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
-+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint),
-+ doepint.d32);
-+ DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n",
-+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl));
-+
-+ if (core_if->snpsid >= OTG_CORE_REV_3_00a
-+ && core_if->dma_enable == 0) {
-+ doepint_data_t doepint;
-+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[0]->doepint);
-+ if (pcd->ep0state == EP0_IDLE && doepint.b.sr) {
-+ CLEAR_OUT_EP_INTR(core_if, epnum, sr);
-+ goto exit_xfercompl;
-+ }
-+ }
-+ /* In case of DDMA look at SR bit to go to the Data Stage */
-+ if (core_if->dma_desc_enable) {
-+ dev_dma_desc_sts_t status = {.d32 = 0};
-+ if (pcd->ep0state == EP0_IDLE) {
-+ status.d32 = core_if->dev_if->setup_desc_addr[core_if->
-+ dev_if->setup_desc_index]->status.d32;
-+ if(pcd->data_terminated) {
-+ pcd->data_terminated = 0;
-+ status.d32 = core_if->dev_if->out_desc_addr->status.d32;
-+ dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8);
-+ }
-+ if (status.b.sr) {
-+ if (doepint.b.setup) {
-+ DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n");
-+ /* Already started data stage, clear setup */
-+ CLEAR_OUT_EP_INTR(core_if, epnum, setup);
-+ doepint.b.setup = 0;
-+ handle_ep0(pcd);
-+ /* Prepare for more setup packets */
-+ if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
-+ pcd->ep0state == EP0_IN_DATA_PHASE) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+
-+ goto exit_xfercompl;
-+ } else {
-+ /* Prepare for more setup packets */
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP0_IDLE SR=1 setup=0 new setup comes\n");
-+ ep0_out_start(core_if, pcd);
-+ }
-+ }
-+ } else {
-+ dwc_otg_pcd_request_t *req;
-+ dev_dma_desc_sts_t status = {.d32 = 0};
-+ diepint_data_t diepint0;
-+ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint);
-+
-+ if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) {
-+ DWC_ERROR("EP0 is stalled/disconnected\n");
-+ }
-+
-+ /* Clear IN xfercompl if set */
-+ if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE
-+ || pcd->ep0state == EP0_IN_DATA_PHASE)) {
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint, diepint0.d32);
-+ }
-+
-+ status.d32 = core_if->dev_if->setup_desc_addr[core_if->
-+ dev_if->setup_desc_index]->status.d32;
-+
-+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len
-+ && (pcd->ep0state == EP0_OUT_DATA_PHASE))
-+ status.d32 = core_if->dev_if->out_desc_addr->status.d32;
-+ if (pcd->ep0state == EP0_OUT_STATUS_PHASE)
-+ status.d32 = core_if->dev_if->
-+ out_desc_addr->status.d32;
-+
-+ if (status.b.sr) {
-+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
-+ } else {
-+ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
-+ pcd->ep0state == EP0_OUT_DATA_PHASE) {
-+ /* Read arrived setup packet from req->buf */
-+ dwc_memcpy(&pcd->setup_pkt->req,
-+ req->buf + ep->dwc_ep.xfer_count, 8);
-+ }
-+ req->actual = ep->dwc_ep.xfer_count;
-+ dwc_otg_request_done(ep, req, -ECONNRESET);
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ }
-+ pcd->ep0state = EP0_IDLE;
-+ if (doepint.b.setup) {
-+ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
-+ /* Data stage started, clear setup */
-+ CLEAR_OUT_EP_INTR(core_if, epnum, setup);
-+ doepint.b.setup = 0;
-+ handle_ep0(pcd);
-+ /* Prepare for setup packets if ep0in was enabled*/
-+ if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+
-+ goto exit_xfercompl;
-+ } else {
-+ /* Prepare for more setup packets */
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP0_IDLE SR=1 setup=0 new setup comes 2\n");
-+ ep0_out_start(core_if, pcd);
-+ }
-+ }
-+ }
-+ }
-+ if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable
-+ && core_if->dma_desc_enable == 0) {
-+ doepint_data_t doepint_temp = {.d32 = 0};
-+ deptsiz0_data_t doeptsize0 = {.d32 = 0 };
-+ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[ep->dwc_ep.num]->doepint);
-+ doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[ep->dwc_ep.num]->doeptsiz);
-+ if (pcd->ep0state == EP0_IDLE) {
-+ if (doepint_temp.b.sr) {
-+ CLEAR_OUT_EP_INTR(core_if, epnum, sr);
-+ }
-+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[0]->doepint);
-+ if (doeptsize0.b.supcnt == 3) {
-+ DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n");
-+ ep->dwc_ep.stp_rollover = 1;
-+ }
-+ if (doepint.b.setup) {
-+retry:
-+ /* Already started data stage, clear setup */
-+ CLEAR_OUT_EP_INTR(core_if, epnum, setup);
-+ doepint.b.setup = 0;
-+ handle_ep0(pcd);
-+ ep->dwc_ep.stp_rollover = 0;
-+ /* Prepare for more setup packets */
-+ if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
-+ pcd->ep0state == EP0_IN_DATA_PHASE) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+ goto exit_xfercompl;
-+ } else {
-+ /* Prepare for more setup packets */
-+ DWC_DEBUGPL(DBG_ANY,
-+ "EP0_IDLE SR=1 setup=0 new setup comes\n");
-+ doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[0]->doepint);
-+ if(doepint.b.setup)
-+ goto retry;
-+ ep0_out_start(core_if, pcd);
-+ }
-+ } else {
-+ dwc_otg_pcd_request_t *req;
-+ diepint_data_t diepint0 = {.d32 = 0};
-+ doepint_data_t doepint_temp = {.d32 = 0};
-+ depctl_data_t diepctl0;
-+ diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint);
-+ diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepctl);
-+
-+ if (pcd->ep0state == EP0_IN_DATA_PHASE
-+ || pcd->ep0state == EP0_IN_STATUS_PHASE) {
-+ if (diepint0.b.xfercompl) {
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint, diepint0.d32);
-+ }
-+ if (diepctl0.b.epena) {
-+ diepint_data_t diepint = {.d32 = 0};
-+ diepctl0.b.snak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepctl, diepctl0.d32);
-+ do {
-+ dwc_udelay(10);
-+ diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint);
-+ } while (!diepint.b.inepnakeff);
-+ diepint.b.inepnakeff = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint, diepint.d32);
-+ diepctl0.d32 = 0;
-+ diepctl0.b.epdis = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl,
-+ diepctl0.d32);
-+ do {
-+ dwc_udelay(10);
-+ diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ in_ep_regs[0]->diepint);
-+ } while (!diepint.b.epdisabled);
-+ diepint.b.epdisabled = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint,
-+ diepint.d32);
-+ }
-+ }
-+ doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[ep->dwc_ep.num]->doepint);
-+ if (doepint_temp.b.sr) {
-+ CLEAR_OUT_EP_INTR(core_if, epnum, sr);
-+ if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
-+ } else {
-+ DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
-+ pcd->ep0state == EP0_OUT_DATA_PHASE) {
-+ /* Read arrived setup packet from req->buf */
-+ dwc_memcpy(&pcd->setup_pkt->req,
-+ req->buf + ep->dwc_ep.xfer_count, 8);
-+ }
-+ req->actual = ep->dwc_ep.xfer_count;
-+ dwc_otg_request_done(ep, req, -ECONNRESET);
-+ ep->dwc_ep.start_xfer_buff = 0;
-+ ep->dwc_ep.xfer_buff = 0;
-+ ep->dwc_ep.xfer_len = 0;
-+ }
-+ pcd->ep0state = EP0_IDLE;
-+ if (doepint.b.setup) {
-+ DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
-+ /* Data stage started, clear setup */
-+ CLEAR_OUT_EP_INTR(core_if, epnum, setup);
-+ doepint.b.setup = 0;
-+ handle_ep0(pcd);
-+ /* Prepare for setup packets if ep0in was enabled*/
-+ if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
-+ ep0_out_start(core_if, pcd);
-+ }
-+ goto exit_xfercompl;
-+ } else {
-+ /* Prepare for more setup packets */
-+ DWC_DEBUGPL(DBG_PCDV,
-+ "EP0_IDLE SR=1 setup=0 new setup comes 2\n");
-+ ep0_out_start(core_if, pcd);
-+ }
-+ }
-+ }
-+ }
-+ if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE)
-+ handle_ep0(pcd);
-+exit_xfercompl:
-+ DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
-+ dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32);
-+ } else {
-+ if (core_if->dma_desc_enable == 0
-+ || pcd->ep0state != EP0_IDLE)
-+ handle_ep0(pcd);
-+ }
-+#ifdef DWC_EN_ISOC
-+ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (doepint.b.pktdrpsts == 0) {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if,
-+ epnum,
-+ xfercompl);
-+ complete_iso_ep(pcd, ep);
-+ } else {
-+
-+ doepint_data_t doepint = {.d32 = 0 };
-+ doepint.b.xfercompl = 1;
-+ doepint.b.pktdrpsts = 1;
-+ DWC_WRITE_REG32
-+ (&core_if->dev_if->out_ep_regs
-+ [epnum]->doepint,
-+ doepint.d32);
-+ if (handle_iso_out_pkt_dropped
-+ (core_if, dwc_ep)) {
-+ complete_iso_ep(pcd,
-+ ep);
-+ }
-+ }
-+#endif /* DWC_EN_ISOC */
-+#ifdef DWC_UTE_PER_IO
-+ } else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
-+ if (!ep->stopped)
-+ complete_xiso_ep(ep);
-+#endif /* DWC_UTE_PER_IO */
-+ } else {
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if, epnum,
-+ xfercompl);
-+
-+ if (core_if->core_params->dev_out_nak) {
-+ DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]);
-+ pcd->core_if->ep_xfer_info[epnum].state = 0;
-+#ifdef DEBUG
-+ print_memory_payload(pcd, dwc_ep);
-+#endif
-+ }
-+ complete_ep(ep);
-+ }
-+
-+ }
-+
-+ /* Endpoint disable */
-+ if (doepint.b.epdisabled) {
-+
-+ /* Clear the bit in DOEPINTn for this interrupt */
-+ CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled);
-+ if (core_if->core_params->dev_out_nak) {
-+#ifdef DEBUG
-+ print_memory_payload(pcd, dwc_ep);
-+#endif
-+ /* In case of timeout condition */
-+ if (core_if->ep_xfer_info[epnum].state == 2) {
-+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->dctl);
-+ dctl.b.cgoutnak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32);
-+ /* Unmask goutnakeff interrupt which was masked
-+ * during handle nak out interrupt */
-+ gintmsk.b.goutnakeff = 1;
-+ DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
-+ 0, gintmsk.d32);
-+
-+ complete_ep(ep);
-+ }
-+ }
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
-+ {
-+ dctl_data_t dctl;
-+ gintmsk_data_t intr_mask = {.d32 = 0};
-+ dwc_otg_pcd_request_t *req = 0;
-+
-+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ dev_global_regs->dctl);
-+ dctl.b.cgoutnak = 1;
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
-+ dctl.d32);
-+
-+ intr_mask.d32 = 0;
-+ intr_mask.b.incomplisoout = 1;
-+
-+ /* Get any pending requests */
-+ if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
-+ req = DWC_CIRCLEQ_FIRST(&ep->queue);
-+ if (!req) {
-+ DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
-+ } else {
-+ dwc_otg_request_done(ep, req, 0);
-+ start_next_request(ep);
-+ }
-+ } else {
-+ DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
-+ }
-+ }
-+ }
-+ /* AHB Error */
-+ if (doepint.b.ahberr) {
-+ DWC_ERROR("EP%d OUT AHB Error\n", epnum);
-+ DWC_ERROR("EP%d DEPDMA=0x%08x \n",
-+ epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma);
-+ CLEAR_OUT_EP_INTR(core_if, epnum, ahberr);
-+ }
-+ /* Setup Phase Done (contorl EPs) */
-+ if (doepint.b.setup) {
-+#ifdef DEBUG_EP0
-+ DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum);
-+#endif
-+ CLEAR_OUT_EP_INTR(core_if, epnum, setup);
-+
-+ handle_ep0(pcd);
-+ }
-+
-+ /** OUT EP BNA Intr */
-+ if (doepint.b.bna) {
-+ CLEAR_OUT_EP_INTR(core_if, epnum, bna);
-+ if (core_if->dma_desc_enable) {
-+#ifdef DWC_EN_ISOC
-+ if (dwc_ep->type ==
-+ DWC_OTG_EP_TYPE_ISOC) {
-+ /*
-+ * This checking is performed to prevent first "false" BNA
-+ * handling occuring right after reconnect
-+ */
-+ if (dwc_ep->next_frame !=
-+ 0xffffffff)
-+ dwc_otg_pcd_handle_iso_bna(ep);
-+ } else
-+#endif /* DWC_EN_ISOC */
-+ {
-+ dwc_otg_pcd_handle_noniso_bna(ep);
-+ }
-+ }
-+ }
-+ /* Babble Interrupt */
-+ if (doepint.b.babble) {
-+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n",
-+ epnum);
-+ handle_out_ep_babble_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if, epnum, babble);
-+ }
-+ if (doepint.b.outtknepdis) {
-+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \
-+ disabled\n",epnum);
-+ if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ doepmsk_data_t doepmsk = {.d32 = 0};
-+ ep->dwc_ep.frame_num = core_if->frame_num;
-+ if (ep->dwc_ep.bInterval > 1) {
-+ depctl_data_t depctl;
-+ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->
-+ out_ep_regs[epnum]->doepctl);
-+ if (ep->dwc_ep.frame_num & 0x1) {
-+ depctl.b.setd1pid = 1;
-+ depctl.b.setd0pid = 0;
-+ } else {
-+ depctl.b.setd0pid = 1;
-+ depctl.b.setd1pid = 0;
-+ }
-+ DWC_WRITE_REG32(&core_if->dev_if->
-+ out_ep_regs[epnum]->doepctl, depctl.d32);
-+ }
-+ start_next_request(ep);
-+ doepmsk.b.outtknepdis = 1;
-+ DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
-+ doepmsk.d32, 0);
-+ }
-+ CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis);
-+ }
-+
-+ /* NAK Interrutp */
-+ if (doepint.b.nak) {
-+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum);
-+ handle_out_ep_nak_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if, epnum, nak);
-+ }
-+ /* NYET Interrutp */
-+ if (doepint.b.nyet) {
-+ DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum);
-+ handle_out_ep_nyet_intr(pcd, epnum);
-+
-+ CLEAR_OUT_EP_INTR(core_if, epnum, nyet);
-+ }
-+ }
-+
-+ epnum++;
-+ ep_intr >>= 1;
-+ }
-+
-+ return 1;
-+
-+#undef CLEAR_OUT_EP_INTR
-+}
-+static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun)
-+{
-+ int retval = 0;
-+ if(!frm_overrun && curr_fr >= trgt_fr)
-+ retval = 1;
-+ else if (frm_overrun
-+ && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2)))
-+ retval = 1;
-+ return retval;
-+}
-+/**
-+ * Incomplete ISO IN Transfer Interrupt.
-+ * This interrupt indicates one of the following conditions occurred
-+ * while transmitting an ISOC transaction.
-+ * - Corrupted IN Token for ISOC EP.
-+ * - Packet not complete in FIFO.
-+ * The follow actions will be taken:
-+ * -# Determine the EP
-+ * -# Set incomplete flag in dwc_ep structure
-+ * -# Disable EP; when "Endpoint Disabled" interrupt is received
-+ * Flush FIFO
-+ */
-+int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd)
-+{
-+ gintsts_data_t gintsts;
-+
-+#ifdef DWC_EN_ISOC
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dsts_data_t dsts = {.d32 = 0 };
-+ dwc_ep_t *dwc_ep;
-+ int i;
-+
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ for (i = 1; i <= dev_if->num_in_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i].dwc_ep;
-+ if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+
-+ if (depctl.b.epdis && deptsiz.d32) {
-+ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
-+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num =
-+ (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+
-+ if (dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr =
-+ dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr =
-+ dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr =
-+ dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr =
-+ dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+
-+ dsts.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
-+ dev_global_regs->dsts);
-+ dwc_ep->next_frame = dsts.b.soffn;
-+
-+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
-+ (pcd),
-+ dwc_ep);
-+ }
-+ }
-+ }
-+
-+#else
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dwc_ep_t *dwc_ep;
-+ dwc_otg_dev_if_t *dev_if;
-+ int i;
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n");
-+
-+ for (i = 1; i <= dev_if->num_in_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i-1].dwc_ep;
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
-+ if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num,
-+ dwc_ep->frm_overrun))
-+ {
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ depctl.b.snak = 1;
-+ depctl.b.epdis = 1;
-+ DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32);
-+ }
-+ }
-+ }
-+
-+ /*intr_mask.b.incomplisoin = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0); */
-+#endif //DWC_EN_ISOC
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.incomplisoin = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * Incomplete ISO OUT Transfer Interrupt.
-+ *
-+ * This interrupt indicates that the core has dropped an ISO OUT
-+ * packet. The following conditions can be the cause:
-+ * - FIFO Full, the entire packet would not fit in the FIFO.
-+ * - CRC Error
-+ * - Corrupted Token
-+ * The follow actions will be taken:
-+ * -# Determine the EP
-+ * -# Set incomplete flag in dwc_ep structure
-+ * -# Read any data from the FIFO
-+ * -# Disable EP. When "Endpoint Disabled" interrupt is received
-+ * re-enable EP.
-+ */
-+int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd)
-+{
-+
-+ gintsts_data_t gintsts;
-+
-+#ifdef DWC_EN_ISOC
-+ dwc_otg_dev_if_t *dev_if;
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dsts_data_t dsts = {.d32 = 0 };
-+ dwc_ep_t *dwc_ep;
-+ int i;
-+
-+ dev_if = GET_CORE_IF(pcd)->dev_if;
-+
-+ for (i = 1; i <= dev_if->num_out_eps; ++i) {
-+ dwc_ep = &pcd->in_ep[i].dwc_ep;
-+ if (pcd->out_ep[i].dwc_ep.active &&
-+ pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz);
-+ depctl.d32 =
-+ DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
-+
-+ if (depctl.b.epdis && deptsiz.d32) {
-+ set_current_pkt_info(GET_CORE_IF(pcd),
-+ &pcd->out_ep[i].dwc_ep);
-+ if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
-+ dwc_ep->cur_pkt = 0;
-+ dwc_ep->proc_buf_num =
-+ (dwc_ep->proc_buf_num ^ 1) & 0x1;
-+
-+ if (dwc_ep->proc_buf_num) {
-+ dwc_ep->cur_pkt_addr =
-+ dwc_ep->xfer_buff1;
-+ dwc_ep->cur_pkt_dma_addr =
-+ dwc_ep->dma_addr1;
-+ } else {
-+ dwc_ep->cur_pkt_addr =
-+ dwc_ep->xfer_buff0;
-+ dwc_ep->cur_pkt_dma_addr =
-+ dwc_ep->dma_addr0;
-+ }
-+
-+ }
-+
-+ dsts.d32 =
-+ DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
-+ dev_global_regs->dsts);
-+ dwc_ep->next_frame = dsts.b.soffn;
-+
-+ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
-+ (pcd),
-+ dwc_ep);
-+ }
-+ }
-+ }
-+#else
-+ /** @todo implement ISR */
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ dwc_otg_core_if_t *core_if;
-+ deptsiz_data_t deptsiz = {.d32 = 0 };
-+ depctl_data_t depctl = {.d32 = 0 };
-+ dctl_data_t dctl = {.d32 = 0 };
-+ dwc_ep_t *dwc_ep = NULL;
-+ int i;
-+ core_if = GET_CORE_IF(pcd);
-+
-+ for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
-+ dwc_ep = &pcd->out_ep[i].dwc_ep;
-+ depctl.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
-+ if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) {
-+ core_if->dev_if->isoc_ep = dwc_ep;
-+ deptsiz.d32 =
-+ DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
-+ break;
-+ }
-+ }
-+ dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
-+ gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
-+ intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
-+
-+ if (!intr_mask.b.goutnakeff) {
-+ /* Unmask it */
-+ intr_mask.b.goutnakeff = 1;
-+ DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32);
-+ }
-+ if (!gintsts.b.goutnakeff) {
-+ dctl.b.sgoutnak = 1;
-+ }
-+ DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
-+
-+ depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
-+ if (depctl.b.epena) {
-+ depctl.b.epdis = 1;
-+ depctl.b.snak = 1;
-+ }
-+ DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32);
-+
-+ intr_mask.d32 = 0;
-+ intr_mask.b.incomplisoout = 1;
-+
-+#endif /* DWC_EN_ISOC */
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.incomplisoout = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * This function handles the Global IN NAK Effective interrupt.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ depctl_data_t diepctl = {.d32 = 0 };
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+ int i;
-+
-+ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
-+
-+ /* Disable all active IN EPs */
-+ for (i = 0; i <= dev_if->num_in_eps; i++) {
-+ diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
-+ if (!(diepctl.b.eptype & 1) && diepctl.b.epena) {
-+ if (core_if->start_predict > 0)
-+ core_if->start_predict++;
-+ diepctl.b.epdis = 1;
-+ diepctl.b.snak = 1;
-+ DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32);
-+ }
-+ }
-+
-+
-+ /* Disable the Global IN NAK Effective Interrupt */
-+ intr_mask.b.ginnakeff = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.ginnakeff = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * OUT NAK Effective.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
-+ gintmsk_data_t intr_mask = {.d32 = 0 };
-+ gintsts_data_t gintsts;
-+ depctl_data_t doepctl;
-+ int i;
-+
-+ /* Disable the Global OUT NAK Effective Interrupt */
-+ intr_mask.b.goutnakeff = 1;
-+ DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
-+ intr_mask.d32, 0);
-+
-+ /* If DEV OUT NAK enabled*/
-+ if (pcd->core_if->core_params->dev_out_nak) {
-+ /* Run over all out endpoints to determine the ep number on
-+ * which the timeout has happened
-+ */
-+ for (i = 0; i <= dev_if->num_out_eps; i++) {
-+ if ( pcd->core_if->ep_xfer_info[i].state == 2 )
-+ break;
-+ }
-+ if (i > dev_if->num_out_eps) {
-+ dctl_data_t dctl;
-+ dctl.d32 =
-+ DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
-+ dctl.b.cgoutnak = 1;
-+ DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl,
-+ dctl.d32);
-+ goto out;
-+ }
-+
-+ /* Disable the endpoint */
-+ doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
-+ if (doepctl.b.epena) {
-+ doepctl.b.epdis = 1;
-+ doepctl.b.snak = 1;
-+ }
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
-+ return 1;
-+ }
-+ /* We come here from Incomplete ISO OUT handler */
-+ if (dev_if->isoc_ep) {
-+ dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep;
-+ uint32_t epnum = dwc_ep->num;
-+ doepint_data_t doepint;
-+ doepint.d32 =
-+ DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint);
-+ dev_if->isoc_ep = NULL;
-+ doepctl.d32 =
-+ DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl);
-+ DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32);
-+ if (doepctl.b.epena) {
-+ doepctl.b.epdis = 1;
-+ doepctl.b.snak = 1;
-+ }
-+ DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl,
-+ doepctl.d32);
-+ return 1;
-+ } else
-+ DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
-+ "Global OUT NAK Effective\n");
-+
-+out:
-+ /* Clear interrupt */
-+ gintsts.d32 = 0;
-+ gintsts.b.goutnakeff = 1;
-+ DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
-+ gintsts.d32);
-+
-+ return 1;
-+}
-+
-+/**
-+ * PCD interrupt handler.
-+ *
-+ * The PCD handles the device interrupts. Many conditions can cause a
-+ * device interrupt. When an interrupt occurs, the device interrupt
-+ * service routine determines the cause of the interrupt and
-+ * dispatches handling to the appropriate function. These interrupt
-+ * handling functions are described below.
-+ *
-+ * All interrupt registers are processed from LSB to MSB.
-+ *
-+ */
-+int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd)
-+{
-+ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
-+#ifdef VERBOSE
-+ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
-+#endif
-+ gintsts_data_t gintr_status;
-+ int32_t retval = 0;
-+
-+ /* Exit from ISR if core is hibernated */
-+ if (core_if->hibernation_suspend == 1) {
-+ return retval;
-+ }
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n",
-+ __func__,
-+ DWC_READ_REG32(&global_regs->gintsts),
-+ DWC_READ_REG32(&global_regs->gintmsk));
-+#endif
-+
-+ if (dwc_otg_is_device_mode(core_if)) {
-+ DWC_SPINLOCK(pcd->lock);
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n",
-+ __func__,
-+ DWC_READ_REG32(&global_regs->gintsts),
-+ DWC_READ_REG32(&global_regs->gintmsk));
-+#endif
-+
-+ gintr_status.d32 = dwc_otg_read_core_intr(core_if);
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
-+ __func__, gintr_status.d32);
-+
-+ if (gintr_status.b.sofintr) {
-+ retval |= dwc_otg_pcd_handle_sof_intr(pcd);
-+ }
-+ if (gintr_status.b.rxstsqlvl) {
-+ retval |=
-+ dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
-+ }
-+ if (gintr_status.b.nptxfempty) {
-+ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
-+ }
-+ if (gintr_status.b.goutnakeff) {
-+ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
-+ }
-+ if (gintr_status.b.i2cintr) {
-+ retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
-+ }
-+ if (gintr_status.b.erlysuspend) {
-+ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
-+ }
-+ if (gintr_status.b.usbreset) {
-+ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
-+ }
-+ if (gintr_status.b.enumdone) {
-+ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
-+ }
-+ if (gintr_status.b.isooutdrop) {
-+ retval |=
-+ dwc_otg_pcd_handle_isoc_out_packet_dropped_intr
-+ (pcd);
-+ }
-+ if (gintr_status.b.eopframe) {
-+ retval |=
-+ dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
-+ }
-+ if (gintr_status.b.inepint) {
-+ if (!core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-+ }
-+ }
-+ if (gintr_status.b.outepintr) {
-+ if (!core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-+ }
-+ }
-+ if (gintr_status.b.epmismatch) {
-+ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd);
-+ }
-+ if (gintr_status.b.fetsusp) {
-+ retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd);
-+ }
-+ if (gintr_status.b.ginnakeff) {
-+ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
-+ }
-+ if (gintr_status.b.incomplisoin) {
-+ retval |=
-+ dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
-+ }
-+ if (gintr_status.b.incomplisoout) {
-+ retval |=
-+ dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
-+ }
-+
-+ /* In MPI mode Device Endpoints interrupts are asserted
-+ * without setting outepintr and inepint bits set, so these
-+ * Interrupt handlers are called without checking these bit-fields
-+ */
-+ if (core_if->multiproc_int_enable) {
-+ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
-+ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
-+ }
-+#ifdef VERBOSE
-+ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
-+ DWC_READ_REG32(&global_regs->gintsts));
-+#endif
-+ DWC_SPINUNLOCK(pcd->lock);
-+ }
-+ return retval;
-+}
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
-@@ -0,0 +1,1280 @@
-+ /* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $
-+ * $Revision: #21 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+#ifndef DWC_HOST_ONLY
-+
-+/** @file
-+ * This file implements the Peripheral Controller Driver.
-+ *
-+ * The Peripheral Controller Driver (PCD) is responsible for
-+ * translating requests from the Function Driver into the appropriate
-+ * actions on the DWC_otg controller. It isolates the Function Driver
-+ * from the specifics of the controller by providing an API to the
-+ * Function Driver.
-+ *
-+ * The Peripheral Controller Driver for Linux will implement the
-+ * Gadget API, so that the existing Gadget drivers can be used.
-+ * (Gadget Driver is the Linux terminology for a Function Driver.)
-+ *
-+ * The Linux Gadget API is defined in the header file
-+ * <code><linux/usb_gadget.h></code>. The USB EP operations API is
-+ * defined in the structure <code>usb_ep_ops</code> and the USB
-+ * Controller API is defined in the structure
-+ * <code>usb_gadget_ops</code>.
-+ *
-+ */
-+
-+#include "dwc_otg_os_dep.h"
-+#include "dwc_otg_pcd_if.h"
-+#include "dwc_otg_pcd.h"
-+#include "dwc_otg_driver.h"
-+#include "dwc_otg_dbg.h"
-+
-+extern bool fiq_enable;
-+
-+static struct gadget_wrapper {
-+ dwc_otg_pcd_t *pcd;
-+
-+ struct usb_gadget gadget;
-+ struct usb_gadget_driver *driver;
-+
-+ struct usb_ep ep0;
-+ struct usb_ep in_ep[16];
-+ struct usb_ep out_ep[16];
-+
-+} *gadget_wrapper;
-+
-+/* Display the contents of the buffer */
-+extern void dump_msg(const u8 * buf, unsigned int length);
-+/**
-+ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case
-+ * if the endpoint is not found
-+ */
-+static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
-+{
-+ int i;
-+ if (pcd->ep0.priv == handle) {
-+ return &pcd->ep0;
-+ }
-+
-+ for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
-+ if (pcd->in_ep[i].priv == handle)
-+ return &pcd->in_ep[i];
-+ if (pcd->out_ep[i].priv == handle)
-+ return &pcd->out_ep[i];
-+ }
-+
-+ return NULL;
-+}
-+
-+/* USB Endpoint Operations */
-+/*
-+ * The following sections briefly describe the behavior of the Gadget
-+ * API endpoint operations implemented in the DWC_otg driver
-+ * software. Detailed descriptions of the generic behavior of each of
-+ * these functions can be found in the Linux header file
-+ * include/linux/usb_gadget.h.
-+ *
-+ * The Gadget API provides wrapper functions for each of the function
-+ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
-+ * function, which then calls the underlying PCD function. The
-+ * following sections are named according to the wrapper
-+ * functions. Within each section, the corresponding DWC_otg PCD
-+ * function name is specified.
-+ *
-+ */
-+
-+/**
-+ * This function is called by the Gadget Driver for each EP to be
-+ * configured for the current configuration (SET_CONFIGURATION).
-+ *
-+ * This function initializes the dwc_otg_ep_t data structure, and then
-+ * calls dwc_otg_ep_activate.
-+ */
-+static int ep_enable(struct usb_ep *usb_ep,
-+ const struct usb_endpoint_descriptor *ep_desc)
-+{
-+ int retval;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc);
-+
-+ if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
-+ DWC_WARN("%s, bad ep or descriptor\n", __func__);
-+ return -EINVAL;
-+ }
-+ if (usb_ep == &gadget_wrapper->ep0) {
-+ DWC_WARN("%s, bad ep(0)\n", __func__);
-+ return -EINVAL;
-+ }
-+
-+ /* Check FIFO size? */
-+ if (!ep_desc->wMaxPacketSize) {
-+ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
-+ return -ERANGE;
-+ }
-+
-+ if (!gadget_wrapper->driver ||
-+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_WARN("%s, bogus device state\n", __func__);
-+ return -ESHUTDOWN;
-+ }
-+
-+ /* Delete after check - MAS */
-+#if 0
-+ nat = (uint32_t) ep_desc->wMaxPacketSize;
-+ printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat);
-+ nat = (nat >> 11) & 0x03;
-+ printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat);
-+#endif
-+ retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd,
-+ (const uint8_t *)ep_desc,
-+ (void *)usb_ep);
-+ if (retval) {
-+ DWC_WARN("dwc_otg_pcd_ep_enable failed\n");
-+ return -EINVAL;
-+ }
-+
-+ usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize);
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function is called when an EP is disabled due to disconnect or
-+ * change in configuration. Any pending requests will terminate with a
-+ * status of -ESHUTDOWN.
-+ *
-+ * This function modifies the dwc_otg_ep_t data structure for this EP,
-+ * and then calls dwc_otg_ep_deactivate.
-+ */
-+static int ep_disable(struct usb_ep *usb_ep)
-+{
-+ int retval;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep);
-+ if (!usb_ep) {
-+ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
-+ usb_ep ? usb_ep->name : NULL);
-+ return -EINVAL;
-+ }
-+
-+ retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep);
-+ if (retval) {
-+ retval = -EINVAL;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function allocates a request object to use with the specified
-+ * endpoint.
-+ *
-+ * @param ep The endpoint to be used with with the request
-+ * @param gfp_flags the GFP_* flags to use.
-+ */
-+static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
-+ gfp_t gfp_flags)
-+{
-+ struct usb_request *usb_req;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags);
-+ if (0 == ep) {
-+ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
-+ return 0;
-+ }
-+ usb_req = kzalloc(sizeof(*usb_req), gfp_flags);
-+ if (0 == usb_req) {
-+ DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n");
-+ return 0;
-+ }
-+ usb_req->dma = DWC_DMA_ADDR_INVALID;
-+
-+ return usb_req;
-+}
-+
-+/**
-+ * This function frees a request object.
-+ *
-+ * @param ep The endpoint associated with the request
-+ * @param req The request being freed
-+ */
-+static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req)
-+{
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req);
-+
-+ if (0 == ep || 0 == req) {
-+ DWC_WARN("%s() %s\n", __func__,
-+ "Invalid ep or req argument!\n");
-+ return;
-+ }
-+
-+ kfree(req);
-+}
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+/**
-+ * This function allocates an I/O buffer to be used for a transfer
-+ * to/from the specified endpoint.
-+ *
-+ * @param usb_ep The endpoint to be used with with the request
-+ * @param bytes The desired number of bytes for the buffer
-+ * @param dma Pointer to the buffer's DMA address; must be valid
-+ * @param gfp_flags the GFP_* flags to use.
-+ * @return address of a new buffer or null is buffer could not be allocated.
-+ */
-+static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
-+ dma_addr_t * dma, gfp_t gfp_flags)
-+{
-+ void *buf;
-+ dwc_otg_pcd_t *pcd = 0;
-+
-+ pcd = gadget_wrapper->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
-+ dma, gfp_flags);
-+
-+ /* Check dword alignment */
-+ if ((bytes & 0x3UL) != 0) {
-+ DWC_WARN("%s() Buffer size is not a multiple of"
-+ "DWORD size (%d)", __func__, bytes);
-+ }
-+
-+ buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags);
-+ WARN_ON(!buf);
-+
-+ /* Check dword alignment */
-+ if (((int)buf & 0x3UL) != 0) {
-+ DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
-+ __func__, buf);
-+ }
-+
-+ return buf;
-+}
-+
-+/**
-+ * This function frees an I/O buffer that was allocated by alloc_buffer.
-+ *
-+ * @param usb_ep the endpoint associated with the buffer
-+ * @param buf address of the buffer
-+ * @param dma The buffer's DMA address
-+ * @param bytes The number of bytes of the buffer
-+ */
-+static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
-+ dma_addr_t dma, unsigned bytes)
-+{
-+ dwc_otg_pcd_t *pcd = 0;
-+
-+ pcd = gadget_wrapper->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes);
-+
-+ dma_free_coherent(NULL, bytes, buf, dma);
-+}
-+#endif
-+
-+/**
-+ * This function is used to submit an I/O Request to an EP.
-+ *
-+ * - When the request completes the request's completion callback
-+ * is called to return the request to the driver.
-+ * - An EP, except control EPs, may have multiple requests
-+ * pending.
-+ * - Once submitted the request cannot be examined or modified.
-+ * - Each request is turned into one or more packets.
-+ * - A BULK EP can queue any amount of data; the transfer is
-+ * packetized.
-+ * - Zero length Packets are specified with the request 'zero'
-+ * flag.
-+ */
-+static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req,
-+ gfp_t gfp_flags)
-+{
-+ dwc_otg_pcd_t *pcd;
-+ struct dwc_otg_pcd_ep *ep = NULL;
-+ int retval = 0, is_isoc_ep = 0;
-+ dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n",
-+ __func__, usb_ep, usb_req, gfp_flags);
-+
-+ if (!usb_req || !usb_req->complete || !usb_req->buf) {
-+ DWC_WARN("bad params\n");
-+ return -EINVAL;
-+ }
-+
-+ if (!usb_ep) {
-+ DWC_WARN("bad ep\n");
-+ return -EINVAL;
-+ }
-+
-+ pcd = gadget_wrapper->pcd;
-+ if (!gadget_wrapper->driver ||
-+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
-+ gadget_wrapper->gadget.speed);
-+ DWC_WARN("bogus device state\n");
-+ return -ESHUTDOWN;
-+ }
-+
-+ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
-+ usb_ep->name, usb_req, usb_req->length, usb_req->buf);
-+
-+ usb_req->status = -EINPROGRESS;
-+ usb_req->actual = 0;
-+
-+ ep = ep_from_handle(pcd, usb_ep);
-+ if (ep == NULL)
-+ is_isoc_ep = 0;
-+ else
-+ is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0;
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ dma_addr = usb_req->dma;
-+#else
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
-+ struct device *dev = NULL;
-+
-+ if (otg_dev != NULL)
-+ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
-+
-+ if (usb_req->length != 0 &&
-+ usb_req->dma == DWC_DMA_ADDR_INVALID) {
-+ dma_addr = dma_map_single(dev, usb_req->buf,
-+ usb_req->length,
-+ ep->dwc_ep.is_in ?
-+ DMA_TO_DEVICE:
-+ DMA_FROM_DEVICE);
-+ }
-+ }
-+#endif
-+
-+#ifdef DWC_UTE_PER_IO
-+ if (is_isoc_ep == 1) {
-+ retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
-+ usb_req->length, usb_req->zero, usb_req,
-+ gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req);
-+ if (retval)
-+ return -EINVAL;
-+
-+ return 0;
-+ }
-+#endif
-+ retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
-+ usb_req->length, usb_req->zero, usb_req,
-+ gfp_flags == GFP_ATOMIC ? 1 : 0);
-+ if (retval) {
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * This function cancels an I/O request from an EP.
-+ */
-+static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
-+{
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req);
-+
-+ if (!usb_ep || !usb_req) {
-+ DWC_WARN("bad argument\n");
-+ return -EINVAL;
-+ }
-+ if (!gadget_wrapper->driver ||
-+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_WARN("bogus device state\n");
-+ return -ESHUTDOWN;
-+ }
-+ if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) {
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * usb_ep_set_halt stalls an endpoint.
-+ *
-+ * usb_ep_clear_halt clears an endpoint halt and resets its data
-+ * toggle.
-+ *
-+ * Both of these functions are implemented with the same underlying
-+ * function. The behavior depends on the value argument.
-+ *
-+ * @param[in] usb_ep the Endpoint to halt or clear halt.
-+ * @param[in] value
-+ * - 0 means clear_halt.
-+ * - 1 means set_halt,
-+ * - 2 means clear stall lock flag.
-+ * - 3 means set stall lock flag.
-+ */
-+static int ep_halt(struct usb_ep *usb_ep, int value)
-+{
-+ int retval = 0;
-+
-+ DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value);
-+
-+ if (!usb_ep) {
-+ DWC_WARN("bad ep\n");
-+ return -EINVAL;
-+ }
-+
-+ retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value);
-+ if (retval == -DWC_E_AGAIN) {
-+ return -EAGAIN;
-+ } else if (retval) {
-+ retval = -EINVAL;
-+ }
-+
-+ return retval;
-+}
-+
-+//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
-+#if 0
-+/**
-+ * ep_wedge: sets the halt feature and ignores clear requests
-+ *
-+ * @usb_ep: the endpoint being wedged
-+ *
-+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
-+ * requests. If the gadget driver clears the halt status, it will
-+ * automatically unwedge the endpoint.
-+ *
-+ * Returns zero on success, else negative errno. *
-+ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
-+ */
-+static int ep_wedge(struct usb_ep *usb_ep)
-+{
-+ int retval = 0;
-+
-+ DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name);
-+
-+ if (!usb_ep) {
-+ DWC_WARN("bad ep\n");
-+ return -EINVAL;
-+ }
-+
-+ retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep);
-+ if (retval == -DWC_E_AGAIN) {
-+ retval = -EAGAIN;
-+ } else if (retval) {
-+ retval = -EINVAL;
-+ }
-+
-+ return retval;
-+}
-+#endif
-+
-+#ifdef DWC_EN_ISOC
-+/**
-+ * This function is used to submit an ISOC Transfer Request to an EP.
-+ *
-+ * - Every time a sync period completes the request's completion callback
-+ * is called to provide data to the gadget driver.
-+ * - Once submitted the request cannot be modified.
-+ * - Each request is turned into periodic data packets untill ISO
-+ * Transfer is stopped..
-+ */
-+static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
-+ gfp_t gfp_flags)
-+{
-+ int retval = 0;
-+
-+ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
-+ DWC_WARN("bad params\n");
-+ return -EINVAL;
-+ }
-+
-+ if (!usb_ep) {
-+ DWC_PRINTF("bad params\n");
-+ return -EINVAL;
-+ }
-+
-+ req->status = -EINPROGRESS;
-+
-+ retval =
-+ dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0,
-+ req->buf1, req->dma0, req->dma1,
-+ req->sync_frame, req->data_pattern_frame,
-+ req->data_per_frame,
-+ req->
-+ flags & USB_REQ_ISO_ASAP ? -1 :
-+ req->start_frame, req->buf_proc_intrvl,
-+ req, gfp_flags == GFP_ATOMIC ? 1 : 0);
-+
-+ if (retval) {
-+ return -EINVAL;
-+ }
-+
-+ return retval;
-+}
-+
-+/**
-+ * This function stops ISO EP Periodic Data Transfer.
-+ */
-+static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
-+{
-+ int retval = 0;
-+ if (!usb_ep) {
-+ DWC_WARN("bad ep\n");
-+ }
-+
-+ if (!gadget_wrapper->driver ||
-+ gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
-+ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
-+ gadget_wrapper->gadget.speed);
-+ DWC_WARN("bogus device state\n");
-+ }
-+
-+ dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req);
-+ if (retval) {
-+ retval = -EINVAL;
-+ }
-+
-+ return retval;
-+}
-+
-+static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep,
-+ int packets, gfp_t gfp_flags)
-+{
-+ struct usb_iso_request *pReq = NULL;
-+ uint32_t req_size;
-+
-+ req_size = sizeof(struct usb_iso_request);
-+ req_size +=
-+ (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
-+
-+ pReq = kmalloc(req_size, gfp_flags);
-+ if (!pReq) {
-+ DWC_WARN("Can't allocate Iso Request\n");
-+ return 0;
-+ }
-+ pReq->iso_packet_desc0 = (void *)(pReq + 1);
-+
-+ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
-+
-+ return pReq;
-+}
-+
-+static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
-+{
-+ kfree(req);
-+}
-+
-+static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = {
-+ .ep_ops = {
-+ .enable = ep_enable,
-+ .disable = ep_disable,
-+
-+ .alloc_request = dwc_otg_pcd_alloc_request,
-+ .free_request = dwc_otg_pcd_free_request,
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ .alloc_buffer = dwc_otg_pcd_alloc_buffer,
-+ .free_buffer = dwc_otg_pcd_free_buffer,
-+#endif
-+
-+ .queue = ep_queue,
-+ .dequeue = ep_dequeue,
-+
-+ .set_halt = ep_halt,
-+ .fifo_status = 0,
-+ .fifo_flush = 0,
-+ },
-+ .iso_ep_start = iso_ep_start,
-+ .iso_ep_stop = iso_ep_stop,
-+ .alloc_iso_request = alloc_iso_request,
-+ .free_iso_request = free_iso_request,
-+};
-+
-+#else
-+
-+ int (*enable) (struct usb_ep *ep,
-+ const struct usb_endpoint_descriptor *desc);
-+ int (*disable) (struct usb_ep *ep);
-+
-+ struct usb_request *(*alloc_request) (struct usb_ep *ep,
-+ gfp_t gfp_flags);
-+ void (*free_request) (struct usb_ep *ep, struct usb_request *req);
-+
-+ int (*queue) (struct usb_ep *ep, struct usb_request *req,
-+ gfp_t gfp_flags);
-+ int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
-+
-+ int (*set_halt) (struct usb_ep *ep, int value);
-+ int (*set_wedge) (struct usb_ep *ep);
-+
-+ int (*fifo_status) (struct usb_ep *ep);
-+ void (*fifo_flush) (struct usb_ep *ep);
-+static struct usb_ep_ops dwc_otg_pcd_ep_ops = {
-+ .enable = ep_enable,
-+ .disable = ep_disable,
-+
-+ .alloc_request = dwc_otg_pcd_alloc_request,
-+ .free_request = dwc_otg_pcd_free_request,
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
-+ .alloc_buffer = dwc_otg_pcd_alloc_buffer,
-+ .free_buffer = dwc_otg_pcd_free_buffer,
-+#else
-+ /* .set_wedge = ep_wedge, */
-+ .set_wedge = NULL, /* uses set_halt instead */
-+#endif
-+
-+ .queue = ep_queue,
-+ .dequeue = ep_dequeue,
-+
-+ .set_halt = ep_halt,
-+ .fifo_status = 0,
-+ .fifo_flush = 0,
-+
-+};
-+
-+#endif /* _EN_ISOC_ */
-+/* Gadget Operations */
-+/**
-+ * The following gadget operations will be implemented in the DWC_otg
-+ * PCD. Functions in the API that are not described below are not
-+ * implemented.
-+ *
-+ * The Gadget API provides wrapper functions for each of the function
-+ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
-+ * wrapper function, which then calls the underlying PCD function. The
-+ * following sections are named according to the wrapper functions
-+ * (except for ioctl, which doesn't have a wrapper function). Within
-+ * each section, the corresponding DWC_otg PCD function name is
-+ * specified.
-+ *
-+ */
-+
-+/**
-+ *Gets the USB Frame number of the last SOF.
-+ */
-+static int get_frame_number(struct usb_gadget *gadget)
-+{
-+ struct gadget_wrapper *d;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
-+
-+ if (gadget == 0) {
-+ return -ENODEV;
-+ }
-+
-+ d = container_of(gadget, struct gadget_wrapper, gadget);
-+ return dwc_otg_pcd_get_frame_number(d->pcd);
-+}
-+
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+static int test_lpm_enabled(struct usb_gadget *gadget)
-+{
-+ struct gadget_wrapper *d;
-+
-+ d = container_of(gadget, struct gadget_wrapper, gadget);
-+
-+ return dwc_otg_pcd_is_lpm_enabled(d->pcd);
-+}
-+#endif
-+
-+/**
-+ * Initiates Session Request Protocol (SRP) to wakeup the host if no
-+ * session is in progress. If a session is already in progress, but
-+ * the device is suspended, remote wakeup signaling is started.
-+ *
-+ */
-+static int wakeup(struct usb_gadget *gadget)
-+{
-+ struct gadget_wrapper *d;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
-+
-+ if (gadget == 0) {
-+ return -ENODEV;
-+ } else {
-+ d = container_of(gadget, struct gadget_wrapper, gadget);
-+ }
-+ dwc_otg_pcd_wakeup(d->pcd);
-+ return 0;
-+}
-+
-+static const struct usb_gadget_ops dwc_otg_pcd_ops = {
-+ .get_frame = get_frame_number,
-+ .wakeup = wakeup,
-+#ifdef CONFIG_USB_DWC_OTG_LPM
-+ .lpm_support = test_lpm_enabled,
-+#endif
-+ // current versions must always be self-powered
-+};
-+
-+static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes)
-+{
-+ int retval = -DWC_E_NOT_SUPPORTED;
-+ if (gadget_wrapper->driver && gadget_wrapper->driver->setup) {
-+ retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget,
-+ (struct usb_ctrlrequest
-+ *)bytes);
-+ }
-+
-+ if (retval == -ENOTSUPP) {
-+ retval = -DWC_E_NOT_SUPPORTED;
-+ } else if (retval < 0) {
-+ retval = -DWC_E_INVALID;
-+ }
-+
-+ return retval;
-+}
-+
-+#ifdef DWC_EN_ISOC
-+static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle, int proc_buf_num)
-+{
-+ int i, packet_count;
-+ struct usb_gadget_iso_packet_descriptor *iso_packet = 0;
-+ struct usb_iso_request *iso_req = req_handle;
-+
-+ if (proc_buf_num) {
-+ iso_packet = iso_req->iso_packet_desc1;
-+ } else {
-+ iso_packet = iso_req->iso_packet_desc0;
-+ }
-+ packet_count =
-+ dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle);
-+ for (i = 0; i < packet_count; ++i) {
-+ int status;
-+ int actual;
-+ int offset;
-+ dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle,
-+ i, &status, &actual, &offset);
-+ switch (status) {
-+ case -DWC_E_NO_DATA:
-+ status = -ENODATA;
-+ break;
-+ default:
-+ if (status) {
-+ DWC_PRINTF("unknown status in isoc packet\n");
-+ }
-+
-+ }
-+ iso_packet[i].status = status;
-+ iso_packet[i].offset = offset;
-+ iso_packet[i].actual_length = actual;
-+ }
-+
-+ iso_req->status = 0;
-+ iso_req->process_buffer(ep_handle, iso_req);
-+
-+ return 0;
-+}
-+#endif /* DWC_EN_ISOC */
-+
-+#ifdef DWC_UTE_PER_IO
-+/**
-+ * Copy the contents of the extended request to the Linux usb_request's
-+ * extended part and call the gadget's completion.
-+ *
-+ * @param pcd Pointer to the pcd structure
-+ * @param ep_handle Void pointer to the usb_ep structure
-+ * @param req_handle Void pointer to the usb_request structure
-+ * @param status Request status returned from the portable logic
-+ * @param ereq_port Void pointer to the extended request structure
-+ * created in the the portable part that contains the
-+ * results of the processed iso packets.
-+ */
-+static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle, int32_t status, void *ereq_port)
-+{
-+ struct dwc_ute_iso_req_ext *ereqorg = NULL;
-+ struct dwc_iso_xreq_port *ereqport = NULL;
-+ struct dwc_ute_iso_packet_descriptor *desc_org = NULL;
-+ int i;
-+ struct usb_request *req;
-+ //struct dwc_ute_iso_packet_descriptor *
-+ //int status = 0;
-+
-+ req = (struct usb_request *)req_handle;
-+ ereqorg = &req->ext_req;
-+ ereqport = (struct dwc_iso_xreq_port *)ereq_port;
-+ desc_org = ereqorg->per_io_frame_descs;
-+
-+ if (req && req->complete) {
-+ /* Copy the request data from the portable logic to our request */
-+ for (i = 0; i < ereqport->pio_pkt_count; i++) {
-+ desc_org[i].actual_length =
-+ ereqport->per_io_frame_descs[i].actual_length;
-+ desc_org[i].status =
-+ ereqport->per_io_frame_descs[i].status;
-+ }
-+
-+ switch (status) {
-+ case -DWC_E_SHUTDOWN:
-+ req->status = -ESHUTDOWN;
-+ break;
-+ case -DWC_E_RESTART:
-+ req->status = -ECONNRESET;
-+ break;
-+ case -DWC_E_INVALID:
-+ req->status = -EINVAL;
-+ break;
-+ case -DWC_E_TIMEOUT:
-+ req->status = -ETIMEDOUT;
-+ break;
-+ default:
-+ req->status = status;
-+ }
-+
-+ /* And call the gadget's completion */
-+ req->complete(ep_handle, req);
-+ }
-+
-+ return 0;
-+}
-+#endif /* DWC_UTE_PER_IO */
-+
-+static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle,
-+ void *req_handle, int32_t status, uint32_t actual)
-+{
-+ struct usb_request *req = (struct usb_request *)req_handle;
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
-+ struct dwc_otg_pcd_ep *ep = NULL;
-+#endif
-+
-+ if (req && req->complete) {
-+ switch (status) {
-+ case -DWC_E_SHUTDOWN:
-+ req->status = -ESHUTDOWN;
-+ break;
-+ case -DWC_E_RESTART:
-+ req->status = -ECONNRESET;
-+ break;
-+ case -DWC_E_INVALID:
-+ req->status = -EINVAL;
-+ break;
-+ case -DWC_E_TIMEOUT:
-+ req->status = -ETIMEDOUT;
-+ break;
-+ default:
-+ req->status = status;
-+
-+ }
-+
-+ req->actual = actual;
-+ DWC_SPINUNLOCK(pcd->lock);
-+ req->complete(ep_handle, req);
-+ DWC_SPINLOCK(pcd->lock);
-+ }
-+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
-+ ep = ep_from_handle(pcd, ep_handle);
-+ if (GET_CORE_IF(pcd)->dma_enable) {
-+ if (req->length != 0) {
-+ dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
-+ struct device *dev = NULL;
-+
-+ if (otg_dev != NULL)
-+ dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
-+
-+ dma_unmap_single(dev, req->dma, req->length,
-+ ep->dwc_ep.is_in ?
-+ DMA_TO_DEVICE: DMA_FROM_DEVICE);
-+ }
-+ }
-+#endif
-+
-+ return 0;
-+}
-+
-+static int _connect(dwc_otg_pcd_t * pcd, int speed)
-+{
-+ gadget_wrapper->gadget.speed = speed;
-+ return 0;
-+}
-+
-+static int _disconnect(dwc_otg_pcd_t * pcd)
-+{
-+ if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) {
-+ gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget);
-+ }
-+ return 0;
-+}
-+
-+static int _resume(dwc_otg_pcd_t * pcd)
-+{
-+ if (gadget_wrapper->driver && gadget_wrapper->driver->resume) {
-+ gadget_wrapper->driver->resume(&gadget_wrapper->gadget);
-+ }
-+
-+ return 0;
-+}
-+
-+static int _suspend(dwc_otg_pcd_t * pcd)
-+{
-+ if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) {
-+ gadget_wrapper->driver->suspend(&gadget_wrapper->gadget);
-+ }
-+ return 0;
-+}
-+
-+/**
-+ * This function updates the otg values in the gadget structure.
-+ */
-+static int _hnp_changed(dwc_otg_pcd_t * pcd)
-+{
-+
-+ if (!gadget_wrapper->gadget.is_otg)
-+ return 0;
-+
-+ gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd);
-+ gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd);
-+ gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd);
-+ return 0;
-+}
-+
-+static int _reset(dwc_otg_pcd_t * pcd)
-+{
-+ return 0;
-+}
-+
-+#ifdef DWC_UTE_CFI
-+static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req)
-+{
-+ int retval = -DWC_E_INVALID;
-+ if (gadget_wrapper->driver->cfi_feature_setup) {
-+ retval =
-+ gadget_wrapper->driver->
-+ cfi_feature_setup(&gadget_wrapper->gadget,
-+ (struct cfi_usb_ctrlrequest *)cfi_req);
-+ }
-+
-+ return retval;
-+}
-+#endif
-+
-+static const struct dwc_otg_pcd_function_ops fops = {
-+ .complete = _complete,
-+#ifdef DWC_EN_ISOC
-+ .isoc_complete = _isoc_complete,
-+#endif
-+ .setup = _setup,
-+ .disconnect = _disconnect,
-+ .connect = _connect,
-+ .resume = _resume,
-+ .suspend = _suspend,
-+ .hnp_changed = _hnp_changed,
-+ .reset = _reset,
-+#ifdef DWC_UTE_CFI
-+ .cfi_setup = _cfi_setup,
-+#endif
-+#ifdef DWC_UTE_PER_IO
-+ .xisoc_complete = _xisoc_complete,
-+#endif
-+};
-+
-+/**
-+ * This function is the top level PCD interrupt handler.
-+ */
-+static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
-+{
-+ dwc_otg_pcd_t *pcd = dev;
-+ int32_t retval = IRQ_NONE;
-+
-+ retval = dwc_otg_pcd_handle_intr(pcd);
-+ if (retval != 0) {
-+ S3C2410X_CLEAR_EINTPEND();
-+ }
-+ return IRQ_RETVAL(retval);
-+}
-+
-+/**
-+ * This function initialized the usb_ep structures to there default
-+ * state.
-+ *
-+ * @param d Pointer on gadget_wrapper.
-+ */
-+void gadget_add_eps(struct gadget_wrapper *d)
-+{
-+ static const char *names[] = {
-+
-+ "ep0",
-+ "ep1in",
-+ "ep2in",
-+ "ep3in",
-+ "ep4in",
-+ "ep5in",
-+ "ep6in",
-+ "ep7in",
-+ "ep8in",
-+ "ep9in",
-+ "ep10in",
-+ "ep11in",
-+ "ep12in",
-+ "ep13in",
-+ "ep14in",
-+ "ep15in",
-+ "ep1out",
-+ "ep2out",
-+ "ep3out",
-+ "ep4out",
-+ "ep5out",
-+ "ep6out",
-+ "ep7out",
-+ "ep8out",
-+ "ep9out",
-+ "ep10out",
-+ "ep11out",
-+ "ep12out",
-+ "ep13out",
-+ "ep14out",
-+ "ep15out"
-+ };
-+
-+ int i;
-+ struct usb_ep *ep;
-+ int8_t dev_endpoints;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__);
-+
-+ INIT_LIST_HEAD(&d->gadget.ep_list);
-+ d->gadget.ep0 = &d->ep0;
-+ d->gadget.speed = USB_SPEED_UNKNOWN;
-+
-+ INIT_LIST_HEAD(&d->gadget.ep0->ep_list);
-+
-+ /**
-+ * Initialize the EP0 structure.
-+ */
-+ ep = &d->ep0;
-+
-+ /* Init the usb_ep structure. */
-+ ep->name = names[0];
-+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->maxpacket = MAX_PACKET_SIZE;
-+ dwc_otg_pcd_ep_enable(d->pcd, NULL, ep);
-+
-+ list_add_tail(&ep->ep_list, &d->gadget.ep_list);
-+
-+ /**
-+ * Initialize the EP structures.
-+ */
-+ dev_endpoints = d->pcd->core_if->dev_if->num_in_eps;
-+
-+ for (i = 0; i < dev_endpoints; i++) {
-+ ep = &d->in_ep[i];
-+
-+ /* Init the usb_ep structure. */
-+ ep->name = names[d->pcd->in_ep[i].dwc_ep.num];
-+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->maxpacket = MAX_PACKET_SIZE;
-+ list_add_tail(&ep->ep_list, &d->gadget.ep_list);
-+ }
-+
-+ dev_endpoints = d->pcd->core_if->dev_if->num_out_eps;
-+
-+ for (i = 0; i < dev_endpoints; i++) {
-+ ep = &d->out_ep[i];
-+
-+ /* Init the usb_ep structure. */
-+ ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num];
-+ ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
-+
-+ /**
-+ * @todo NGS: What should the max packet size be set to
-+ * here? Before EP type is set?
-+ */
-+ ep->maxpacket = MAX_PACKET_SIZE;
-+
-+ list_add_tail(&ep->ep_list, &d->gadget.ep_list);
-+ }
-+
-+ /* remove ep0 from the list. There is a ep0 pointer. */
-+ list_del_init(&d->ep0.ep_list);
-+
-+ d->ep0.maxpacket = MAX_EP0_SIZE;
-+}
-+
-+/**
-+ * This function releases the Gadget device.
-+ * required by device_unregister().
-+ *
-+ * @todo Should this do something? Should it free the PCD?
-+ */
-+static void dwc_otg_pcd_gadget_release(struct device *dev)
-+{
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
-+}
-+
-+static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev)
-+{
-+ static char pcd_name[] = "dwc_otg_pcd";
-+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
-+ struct gadget_wrapper *d;
-+ int retval;
-+
-+ d = DWC_ALLOC(sizeof(*d));
-+ if (d == NULL) {
-+ return NULL;
-+ }
-+
-+ memset(d, 0, sizeof(*d));
-+
-+ d->gadget.name = pcd_name;
-+ d->pcd = otg_dev->pcd;
-+
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
-+ strcpy(d->gadget.dev.bus_id, "gadget");
-+#else
-+ dev_set_name(&d->gadget.dev, "%s", "gadget");
-+#endif
-+
-+ d->gadget.dev.parent = &_dev->dev;
-+ d->gadget.dev.release = dwc_otg_pcd_gadget_release;
-+ d->gadget.ops = &dwc_otg_pcd_ops;
-+ d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL;
-+ d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd);
-+
-+ d->driver = 0;
-+ /* Register the gadget device */
-+ retval = device_register(&d->gadget.dev);
-+ if (retval != 0) {
-+ DWC_ERROR("device_register failed\n");
-+ DWC_FREE(d);
-+ return NULL;
-+ }
-+
-+ return d;
-+}
-+
-+static void free_wrapper(struct gadget_wrapper *d)
-+{
-+ if (d->driver) {
-+ /* should have been done already by driver model core */
-+ DWC_WARN("driver '%s' is still registered\n",
-+ d->driver->driver.name);
-+#ifdef CONFIG_USB_GADGET
-+ usb_gadget_unregister_driver(d->driver);
-+#endif
-+ }
-+
-+ device_unregister(&d->gadget.dev);
-+ DWC_FREE(d);
-+}
-+
-+/**
-+ * This function initialized the PCD portion of the driver.
-+ *
-+ */
-+int pcd_init(dwc_bus_dev_t *_dev)
-+{
-+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
-+ int retval = 0;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev);
-+
-+ otg_dev->pcd = dwc_otg_pcd_init(otg_dev);
-+
-+ if (!otg_dev->pcd) {
-+ DWC_ERROR("dwc_otg_pcd_init failed\n");
-+ return -ENOMEM;
-+ }
-+
-+ otg_dev->pcd->otg_dev = otg_dev;
-+ gadget_wrapper = alloc_wrapper(_dev);
-+
-+ /*
-+ * Initialize EP structures
-+ */
-+ gadget_add_eps(gadget_wrapper);
-+ /*
-+ * Setup interupt handler
-+ */
-+#ifdef PLATFORM_INTERFACE
-+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
-+ platform_get_irq(_dev, fiq_enable ? 0 : 1));
-+ retval = request_irq(platform_get_irq(_dev, fiq_enable ? 0 : 1), dwc_otg_pcd_irq,
-+ IRQF_SHARED, gadget_wrapper->gadget.name,
-+ otg_dev->pcd);
-+ if (retval != 0) {
-+ DWC_ERROR("request of irq%d failed\n",
-+ platform_get_irq(_dev, fiq_enable ? 0 : 1));
-+ free_wrapper(gadget_wrapper);
-+ return -EBUSY;
-+ }
-+#else
-+ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
-+ _dev->irq);
-+ retval = request_irq(_dev->irq, dwc_otg_pcd_irq,
-+ IRQF_SHARED | IRQF_DISABLED,
-+ gadget_wrapper->gadget.name, otg_dev->pcd);
-+ if (retval != 0) {
-+ DWC_ERROR("request of irq%d failed\n", _dev->irq);
-+ free_wrapper(gadget_wrapper);
-+ return -EBUSY;
-+ }
-+#endif
-+
-+ dwc_otg_pcd_start(gadget_wrapper->pcd, &fops);
-+
-+ return retval;
-+}
-+
-+/**
-+ * Cleanup the PCD.
-+ */
-+void pcd_remove(dwc_bus_dev_t *_dev)
-+{
-+ dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
-+ dwc_otg_pcd_t *pcd = otg_dev->pcd;
-+
-+ DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
-+
-+ /*
-+ * Free the IRQ
-+ */
-+#ifdef PLATFORM_INTERFACE
-+ free_irq(platform_get_irq(_dev, 0), pcd);
-+#else
-+ free_irq(_dev->irq, pcd);
-+#endif
-+ dwc_otg_pcd_remove(otg_dev->pcd);
-+ free_wrapper(gadget_wrapper);
-+ otg_dev->pcd = 0;
-+}
-+
-+#endif /* DWC_HOST_ONLY */
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h
-@@ -0,0 +1,2550 @@
-+/* ==========================================================================
-+ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
-+ * $Revision: #98 $
-+ * $Date: 2012/08/10 $
-+ * $Change: 2047372 $
-+ *
-+ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
-+ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
-+ * otherwise expressly agreed to in writing between Synopsys and you.
-+ *
-+ * The Software IS NOT an item of Licensed Software or Licensed Product under
-+ * any End User Software License Agreement or Agreement for Licensed Product
-+ * with Synopsys or any supplement thereto. You are permitted to use and
-+ * redistribute this Software in source and binary forms, with or without
-+ * modification, provided that redistributions of source code must retain this
-+ * notice. You may not view, use, disclose, copy or distribute this file or
-+ * any information contained herein except pursuant to this license grant from
-+ * Synopsys. If you do not agree with this notice, including the disclaimer
-+ * below, then you are not authorized to use the Software.
-+ *
-+ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
-+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-+ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
-+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
-+ * DAMAGE.
-+ * ========================================================================== */
-+
-+#ifndef __DWC_OTG_REGS_H__
-+#define __DWC_OTG_REGS_H__
-+
-+#include "dwc_otg_core_if.h"
-+
-+/**
-+ * @file
-+ *
-+ * This file contains the data structures for accessing the DWC_otg core registers.
-+ *
-+ * The application interfaces with the HS OTG core by reading from and
-+ * writing to the Control and Status Register (CSR) space through the
-+ * AHB Slave interface. These registers are 32 bits wide, and the
-+ * addresses are 32-bit-block aligned.
-+ * CSRs are classified as follows:
-+ * - Core Global Registers
-+ * - Device Mode Registers
-+ * - Device Global Registers
-+ * - Device Endpoint Specific Registers
-+ * - Host Mode Registers
-+ * - Host Global Registers
-+ * - Host Port CSRs
-+ * - Host Channel Specific Registers
-+ *
-+ * Only the Core Global registers can be accessed in both Device and
-+ * Host modes. When the HS OTG core is operating in one mode, either
-+ * Device or Host, the application must not access registers from the
-+ * other mode. When the core switches from one mode to another, the
-+ * registers in the new mode of operation must be reprogrammed as they
-+ * would be after a power-on reset.
-+ */
-+
-+/****************************************************************************/
-+/** DWC_otg Core registers .
-+ * The dwc_otg_core_global_regs structure defines the size
-+ * and relative field offsets for the Core Global registers.
-+ */
-+typedef struct dwc_otg_core_global_regs {
-+ /** OTG Control and Status Register. <i>Offset: 000h</i> */
-+ volatile uint32_t gotgctl;
-+ /** OTG Interrupt Register. <i>Offset: 004h</i> */
-+ volatile uint32_t gotgint;
-+ /**Core AHB Configuration Register. <i>Offset: 008h</i> */
-+ volatile uint32_t gahbcfg;
-+
-+#define DWC_GLBINTRMASK 0x0001
-+#define DWC_DMAENABLE 0x0020
-+#define DWC_NPTXEMPTYLVL_EMPTY 0x0080
-+#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000
-+#define DWC_PTXEMPTYLVL_EMPTY 0x0100
-+#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000
-+
-+ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */
-+ volatile uint32_t gusbcfg;
-+ /**Core Reset Register. <i>Offset: 010h</i> */
-+ volatile uint32_t grstctl;
-+ /**Core Interrupt Register. <i>Offset: 014h</i> */
-+ volatile uint32_t gintsts;
-+ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */
-+ volatile uint32_t gintmsk;
-+ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */
-+ volatile uint32_t grxstsr;
-+ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/
-+ volatile uint32_t grxstsp;
-+ /**Receive FIFO Size Register. <i>Offset: 024h</i> */
-+ volatile uint32_t grxfsiz;
-+ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */
-+ volatile uint32_t gnptxfsiz;
-+ /**Non Periodic Transmit FIFO/Queue Status Register (Read
-+ * Only). <i>Offset: 02Ch</i> */
-+ volatile uint32_t gnptxsts;
-+ /**I2C Access Register. <i>Offset: 030h</i> */
-+ volatile uint32_t gi2cctl;
-+ /**PHY Vendor Control Register. <i>Offset: 034h</i> */
-+ volatile uint32_t gpvndctl;
-+ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */
-+ volatile uint32_t ggpio;
-+ /**User ID Register. <i>Offset: 03Ch</i> */
-+ volatile uint32_t guid;
-+ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */
-+ volatile uint32_t gsnpsid;
-+ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */
-+ volatile uint32_t ghwcfg1;
-+ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */
-+ volatile uint32_t ghwcfg2;
-+#define DWC_SLAVE_ONLY_ARCH 0
-+#define DWC_EXT_DMA_ARCH 1
-+#define DWC_INT_DMA_ARCH 2
-+
-+#define DWC_MODE_HNP_SRP_CAPABLE 0
-+#define DWC_MODE_SRP_ONLY_CAPABLE 1
-+#define DWC_MODE_NO_HNP_SRP_CAPABLE 2
-+#define DWC_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */
-+ volatile uint32_t ghwcfg3;
-+ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/
-+ volatile uint32_t ghwcfg4;
-+ /** Core LPM Configuration register <i>Offset: 054h</i>*/
-+ volatile uint32_t glpmcfg;
-+ /** Global PowerDn Register <i>Offset: 058h</i> */
-+ volatile uint32_t gpwrdn;
-+ /** Global DFIFO SW Config Register <i>Offset: 05Ch</i> */
-+ volatile uint32_t gdfifocfg;
-+ /** ADP Control Register <i>Offset: 060h</i> */
-+ volatile uint32_t adpctl;
-+ /** Reserved <i>Offset: 064h-0FFh</i> */
-+ volatile uint32_t reserved39[39];
-+ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
-+ volatile uint32_t hptxfsiz;
-+ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
-+ otherwise Device Transmit FIFO#n Register.
-+ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
-+ volatile uint32_t dtxfsiz[15];
-+} dwc_otg_core_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Control
-+ * and Status Register (GOTGCTL). Set the bits using the bit
-+ * fields then write the <i>d32</i> value to the register.
-+ */
-+typedef union gotgctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned sesreqscs:1;
-+ unsigned sesreq:1;
-+ unsigned vbvalidoven:1;
-+ unsigned vbvalidovval:1;
-+ unsigned avalidoven:1;
-+ unsigned avalidovval:1;
-+ unsigned bvalidoven:1;
-+ unsigned bvalidovval:1;
-+ unsigned hstnegscs:1;
-+ unsigned hnpreq:1;
-+ unsigned hstsethnpen:1;
-+ unsigned devhnpen:1;
-+ unsigned reserved12_15:4;
-+ unsigned conidsts:1;
-+ unsigned dbnctime:1;
-+ unsigned asesvld:1;
-+ unsigned bsesvld:1;
-+ unsigned otgver:1;
-+ unsigned reserved1:1;
-+ unsigned multvalidbc:5;
-+ unsigned chirpen:1;
-+ unsigned reserved28_31:4;
-+ } b;
-+} gotgctl_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core OTG Interrupt Register
-+ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i>
-+ * value to the register.
-+ */
-+typedef union gotgint_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Current Mode */
-+ unsigned reserved0_1:2;
-+
-+ /** Session End Detected */
-+ unsigned sesenddet:1;
-+
-+ unsigned reserved3_7:5;
-+
-+ /** Session Request Success Status Change */
-+ unsigned sesreqsucstschng:1;
-+ /** Host Negotiation Success Status Change */
-+ unsigned hstnegsucstschng:1;
-+
-+ unsigned reserved10_16:7;
-+
-+ /** Host Negotiation Detected */
-+ unsigned hstnegdet:1;
-+ /** A-Device Timeout Change */
-+ unsigned adevtoutchng:1;
-+ /** Debounce Done */
-+ unsigned debdone:1;
-+ /** Multi-Valued input changed */
-+ unsigned mvic:1;
-+
-+ unsigned reserved31_21:11;
-+
-+ } b;
-+} gotgint_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core AHB Configuration
-+ * Register (GAHBCFG). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gahbcfg_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned glblintrmsk:1;
-+#define DWC_GAHBCFG_GLBINT_ENABLE 1
-+
-+ unsigned hburstlen:4;
-+#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5
-+#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7
-+
-+ unsigned dmaenable:1;
-+#define DWC_GAHBCFG_DMAENABLE 1
-+ unsigned reserved:1;
-+ unsigned nptxfemplvl_txfemplvl:1;
-+ unsigned ptxfemplvl:1;
-+#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1
-+#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0
-+ unsigned reserved9_20:12;
-+ unsigned remmemsupp:1;
-+ unsigned notialldmawrit:1;
-+ unsigned ahbsingle:1;
-+ unsigned reserved24_31:8;
-+ } b;
-+} gahbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core USB Configuration
-+ * Register (GUSBCFG). Set the bits using the bit fields then write
-+ * the <i>d32</i> value to the register.
-+ */
-+typedef union gusbcfg_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned toutcal:3;
-+ unsigned phyif:1;
-+ unsigned ulpi_utmi_sel:1;
-+ unsigned fsintf:1;
-+ unsigned physel:1;
-+ unsigned ddrsel:1;
-+ unsigned srpcap:1;
-+ unsigned hnpcap:1;
-+ unsigned usbtrdtim:4;
-+ unsigned reserved1:1;
-+ unsigned phylpwrclksel:1;
-+ unsigned otgutmifssel:1;
-+ unsigned ulpi_fsls:1;
-+ unsigned ulpi_auto_res:1;
-+ unsigned ulpi_clk_sus_m:1;
-+ unsigned ulpi_ext_vbus_drv:1;
-+ unsigned ulpi_int_vbus_indicator:1;
-+ unsigned term_sel_dl_pulse:1;
-+ unsigned indicator_complement:1;
-+ unsigned indicator_pass_through:1;
-+ unsigned ulpi_int_prot_dis:1;
-+ unsigned ic_usb_cap:1;
-+ unsigned ic_traffic_pull_remove:1;
-+ unsigned tx_end_delay:1;
-+ unsigned force_host_mode:1;
-+ unsigned force_dev_mode:1;
-+ unsigned reserved31:1;
-+ } b;
-+} gusbcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core Reset Register
-+ * (GRSTCTL). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union grstctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Core Soft Reset (CSftRst) (Device and Host)
-+ *
-+ * The application can flush the control logic in the
-+ * entire core using this bit. This bit resets the
-+ * pipelines in the AHB Clock domain as well as the
-+ * PHY Clock domain.
-+ *
-+ * The state machines are reset to an IDLE state, the
-+ * control bits in the CSRs are cleared, all the
-+ * transmit FIFOs and the receive FIFO are flushed.
-+ *
-+ * The status mask bits that control the generation of
-+ * the interrupt, are cleared, to clear the
-+ * interrupt. The interrupt status bits are not
-+ * cleared, so the application can get the status of
-+ * any events that occurred in the core after it has
-+ * set this bit.
-+ *
-+ * Any transactions on the AHB are terminated as soon
-+ * as possible following the protocol. Any
-+ * transactions on the USB are terminated immediately.
-+ *
-+ * The configuration settings in the CSRs are
-+ * unchanged, so the software doesn't have to
-+ * reprogram these registers (Device
-+ * Configuration/Host Configuration/Core System
-+ * Configuration/Core PHY Configuration).
-+ *
-+ * The application can write to this bit, any time it
-+ * wants to reset the core. This is a self clearing
-+ * bit and the core clears this bit after all the
-+ * necessary logic is reset in the core, which may
-+ * take several clocks, depending on the current state
-+ * of the core.
-+ */
-+ unsigned csftrst:1;
-+ /** Hclk Soft Reset
-+ *
-+ * The application uses this bit to reset the control logic in
-+ * the AHB clock domain. Only AHB clock domain pipelines are
-+ * reset.
-+ */
-+ unsigned hsftrst:1;
-+ /** Host Frame Counter Reset (Host Only)<br>
-+ *
-+ * The application can reset the (micro)frame number
-+ * counter inside the core, using this bit. When the
-+ * (micro)frame counter is reset, the subsequent SOF
-+ * sent out by the core, will have a (micro)frame
-+ * number of 0.
-+ */
-+ unsigned hstfrm:1;
-+ /** In Token Sequence Learning Queue Flush
-+ * (INTknQFlsh) (Device Only)
-+ */
-+ unsigned intknqflsh:1;
-+ /** RxFIFO Flush (RxFFlsh) (Device and Host)
-+ *
-+ * The application can flush the entire Receive FIFO
-+ * using this bit. The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is reading from the RxFIFO nor the MAC
-+ * is writing the data in to the FIFO. The
-+ * application should wait until the bit is cleared
-+ * before performing any other operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned rxfflsh:1;
-+ /** TxFIFO Flush (TxFFlsh) (Device and Host).
-+ *
-+ * This bit is used to selectively flush a single or
-+ * all transmit FIFOs. The application must first
-+ * ensure that the core is not in the middle of a
-+ * transaction. The application should write into
-+ * this bit, only after making sure that neither the
-+ * DMA engine is writing into the TxFIFO nor the MAC
-+ * is reading the data out of the FIFO. The
-+ * application should wait until the core clears this
-+ * bit, before performing any operations. This bit
-+ * will takes 8 clocks (slowest of PHY or AHB clock)
-+ * to clear.
-+ */
-+ unsigned txfflsh:1;
-+
-+ /** TxFIFO Number (TxFNum) (Device and Host).
-+ *
-+ * This is the FIFO number which needs to be flushed,
-+ * using the TxFIFO Flush bit. This field should not
-+ * be changed until the TxFIFO Flush bit is cleared by
-+ * the core.
-+ * - 0x0 : Non Periodic TxFIFO Flush
-+ * - 0x1 : Periodic TxFIFO #1 Flush in device mode
-+ * or Periodic TxFIFO in host mode
-+ * - 0x2 : Periodic TxFIFO #2 Flush in device mode.
-+ * - ...
-+ * - 0xF : Periodic TxFIFO #15 Flush in device mode
-+ * - 0x10: Flush all the Transmit NonPeriodic and
-+ * Transmit Periodic FIFOs in the core
-+ */
-+ unsigned txfnum:5;
-+ /** Reserved */
-+ unsigned reserved11_29:19;
-+ /** DMA Request Signal. Indicated DMA request is in
-+ * probress. Used for debug purpose. */
-+ unsigned dmareq:1;
-+ /** AHB Master Idle. Indicates the AHB Master State
-+ * Machine is in IDLE condition. */
-+ unsigned ahbidle:1;
-+ } b;
-+} grstctl_t;
-+
-+/**
-+ * This union represents the bit fields of the Core Interrupt Mask
-+ * Register (GINTMSK). Set/clear the bits using the bit fields then
-+ * write the <i>d32</i> value to the register.
-+ */
-+typedef union gintmsk_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved0:1;
-+ unsigned modemismatch:1;
-+ unsigned otgintr:1;
-+ unsigned sofintr:1;
-+ unsigned rxstsqlvl:1;
-+ unsigned nptxfempty:1;
-+ unsigned ginnakeff:1;
-+ unsigned goutnakeff:1;
-+ unsigned ulpickint:1;
-+ unsigned i2cintr:1;
-+ unsigned erlysuspend:1;
-+ unsigned usbsuspend:1;
-+ unsigned usbreset:1;
-+ unsigned enumdone:1;
-+ unsigned isooutdrop:1;
-+ unsigned eopframe:1;
-+ unsigned restoredone:1;
-+ unsigned epmismatch:1;
-+ unsigned inepintr:1;
-+ unsigned outepintr:1;
-+ unsigned incomplisoin:1;
-+ unsigned incomplisoout:1;
-+ unsigned fetsusp:1;
-+ unsigned resetdet:1;
-+ unsigned portintr:1;
-+ unsigned hcintr:1;
-+ unsigned ptxfempty:1;
-+ unsigned lpmtranrcvd:1;
-+ unsigned conidstschng:1;
-+ unsigned disconnect:1;
-+ unsigned sessreqintr:1;
-+ unsigned wkupintr:1;
-+ } b;
-+} gintmsk_data_t;
-+/**
-+ * This union represents the bit fields of the Core Interrupt Register
-+ * (GINTSTS). Set/clear the bits using the bit fields then write the
-+ * <i>d32</i> value to the register.
-+ */
-+typedef union gintsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+#define DWC_SOF_INTR_MASK 0x0008
-+ /** register bits */
-+ struct {
-+#define DWC_HOST_MODE 1
-+ unsigned curmode:1;
-+ unsigned modemismatch:1;
-+ unsigned otgintr:1;
-+ unsigned sofintr:1;
-+ unsigned rxstsqlvl:1;
-+ unsigned nptxfempty:1;
-+ unsigned ginnakeff:1;
-+ unsigned goutnakeff:1;
-+ unsigned ulpickint:1;
-+ unsigned i2cintr:1;
-+ unsigned erlysuspend:1;
-+ unsigned usbsuspend:1;
-+ unsigned usbreset:1;
-+ unsigned enumdone:1;
-+ unsigned isooutdrop:1;
-+ unsigned eopframe:1;
-+ unsigned restoredone:1;
-+ unsigned epmismatch:1;
-+ unsigned inepint:1;
-+ unsigned outepintr:1;
-+ unsigned incomplisoin:1;
-+ unsigned incomplisoout:1;
-+ unsigned fetsusp:1;
-+ unsigned resetdet:1;
-+ unsigned portintr:1;
-+ unsigned hcintr:1;
-+ unsigned ptxfempty:1;
-+ unsigned lpmtranrcvd:1;
-+ unsigned conidstschng:1;
-+ unsigned disconnect:1;
-+ unsigned sessreqintr:1;
-+ unsigned wkupintr:1;
-+ } b;
-+} gintsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union device_grxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned epnum:4;
-+ unsigned bcnt:11;
-+ unsigned dpid:2;
-+
-+#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet
-+#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete
-+
-+#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK
-+#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete
-+#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet
-+ unsigned pktsts:4;
-+ unsigned fn:4;
-+ unsigned reserved25_31:7;
-+ } b;
-+} device_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Receive Status Read and
-+ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
-+ * element then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union host_grxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned chnum:4;
-+ unsigned bcnt:11;
-+ unsigned dpid:2;
-+
-+ unsigned pktsts:4;
-+#define DWC_GRXSTS_PKTSTS_IN 0x2
-+#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3
-+#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
-+#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7
-+
-+ unsigned reserved21_31:11;
-+ } b;
-+} host_grxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
-+ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element
-+ * then read out the bits using the <i>b</i>it elements.
-+ */
-+typedef union fifosize_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned startaddr:16;
-+ unsigned depth:16;
-+ } b;
-+} fifosize_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Non-Periodic Transmit
-+ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union gnptxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned nptxfspcavail:16;
-+ unsigned nptxqspcavail:8;
-+ /** Top of the Non-Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (Last entry for the selected
-+ * channel/EP)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - IN/OUT
-+ * - 2'b01 - Zero Length OUT
-+ * - 2'b10 - PING/Complete Split
-+ * - 2'b11 - Channel Halt
-+ * - bits 30:27 - Channel/EP Number
-+ */
-+ unsigned nptxqtop_terminate:1;
-+ unsigned nptxqtop_token:2;
-+ unsigned nptxqtop_chnep:4;
-+ unsigned reserved:1;
-+ } b;
-+} gnptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Transmit
-+ * FIFO Status Register (DTXFSTS). Read the register into the
-+ * <i>d32</i> element then read out the bits using the <i>b</i>it
-+ * elements.
-+ */
-+typedef union dtxfsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned txfspcavail:16;
-+ unsigned reserved:16;
-+ } b;
-+} dtxfsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the I2C Control Register
-+ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gi2cctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned rwdata:8;
-+ unsigned regaddr:8;
-+ unsigned addr:7;
-+ unsigned i2cen:1;
-+ unsigned ack:1;
-+ unsigned i2csuspctl:1;
-+ unsigned i2cdevaddr:2;
-+ unsigned i2cdatse0:1;
-+ unsigned reserved:1;
-+ unsigned rw:1;
-+ unsigned bsydne:1;
-+ } b;
-+} gi2cctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the PHY Vendor Control Register
-+ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gpvndctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned regdata:8;
-+ unsigned vctrl:8;
-+ unsigned regaddr16_21:6;
-+ unsigned regwr:1;
-+ unsigned reserved23_24:2;
-+ unsigned newregreq:1;
-+ unsigned vstsbsy:1;
-+ unsigned vstsdone:1;
-+ unsigned reserved28_30:3;
-+ unsigned disulpidrvr:1;
-+ } b;
-+} gpvndctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the General Purpose
-+ * Input/Output Register (GGPIO).
-+ * Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union ggpio_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned gpi:16;
-+ unsigned gpo:16;
-+ } b;
-+} ggpio_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User ID Register
-+ * (GUID). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union guid_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned rwdata:32;
-+ } b;
-+} guid_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Synopsys ID Register
-+ * (GSNPSID). Read the register into the <i>d32</i> element then read out the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gsnpsid_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned rwdata:32;
-+ } b;
-+} gsnpsid_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config1
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg1_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned ep_dir0:2;
-+ unsigned ep_dir1:2;
-+ unsigned ep_dir2:2;
-+ unsigned ep_dir3:2;
-+ unsigned ep_dir4:2;
-+ unsigned ep_dir5:2;
-+ unsigned ep_dir6:2;
-+ unsigned ep_dir7:2;
-+ unsigned ep_dir8:2;
-+ unsigned ep_dir9:2;
-+ unsigned ep_dir10:2;
-+ unsigned ep_dir11:2;
-+ unsigned ep_dir12:2;
-+ unsigned ep_dir13:2;
-+ unsigned ep_dir14:2;
-+ unsigned ep_dir15:2;
-+ } b;
-+} hwcfg1_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config2
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg2_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /* GHWCFG2 */
-+ unsigned op_mode:3;
-+#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
-+#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
-+#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
-+#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
-+#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
-+
-+ unsigned architecture:2;
-+ unsigned point2point:1;
-+ unsigned hs_phy_type:2;
-+#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
-+#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
-+#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
-+
-+ unsigned fs_phy_type:2;
-+ unsigned num_dev_ep:4;
-+ unsigned num_host_chan:4;
-+ unsigned perio_ep_supported:1;
-+ unsigned dynamic_fifo:1;
-+ unsigned multi_proc_int:1;
-+ unsigned reserved21:1;
-+ unsigned nonperio_tx_q_depth:2;
-+ unsigned host_perio_tx_q_depth:2;
-+ unsigned dev_token_q_depth:5;
-+ unsigned otg_enable_ic_usb:1;
-+ } b;
-+} hwcfg2_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config3
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg3_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /* GHWCFG3 */
-+ unsigned xfer_size_cntr_width:4;
-+ unsigned packet_size_cntr_width:3;
-+ unsigned otg_func:1;
-+ unsigned i2c:1;
-+ unsigned vendor_ctrl_if:1;
-+ unsigned optional_features:1;
-+ unsigned synch_reset_type:1;
-+ unsigned adp_supp:1;
-+ unsigned otg_enable_hsic:1;
-+ unsigned bc_support:1;
-+ unsigned otg_lpm_en:1;
-+ unsigned dfifo_depth:16;
-+ } b;
-+} hwcfg3_data_t;
-+
-+/**
-+ * This union represents the bit fields in the User HW Config4
-+ * Register. Read the register into the <i>d32</i> element then read
-+ * out the bits using the <i>b</i>it elements.
-+ */
-+typedef union hwcfg4_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned num_dev_perio_in_ep:4;
-+ unsigned power_optimiz:1;
-+ unsigned min_ahb_freq:1;
-+ unsigned hiber:1;
-+ unsigned xhiber:1;
-+ unsigned reserved:6;
-+ unsigned utmi_phy_data_width:2;
-+ unsigned num_dev_mode_ctrl_ep:4;
-+ unsigned iddig_filt_en:1;
-+ unsigned vbus_valid_filt_en:1;
-+ unsigned a_valid_filt_en:1;
-+ unsigned b_valid_filt_en:1;
-+ unsigned session_end_filt_en:1;
-+ unsigned ded_fifo_en:1;
-+ unsigned num_in_eps:4;
-+ unsigned desc_dma:1;
-+ unsigned desc_dma_dyn:1;
-+ } b;
-+} hwcfg4_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core LPM Configuration
-+ * Register (GLPMCFG). Set the bits using bit fields then write
-+ * the <i>d32</i> value to the register.
-+ */
-+typedef union glpmctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** LPM-Capable (LPMCap) (Device and Host)
-+ * The application uses this bit to control
-+ * the DWC_otg core LPM capabilities.
-+ */
-+ unsigned lpm_cap_en:1;
-+ /** LPM response programmed by application (AppL1Res) (Device)
-+ * Handshake response to LPM token pre-programmed
-+ * by device application software.
-+ */
-+ unsigned appl_resp:1;
-+ /** Host Initiated Resume Duration (HIRD) (Device and Host)
-+ * In Host mode this field indicates the value of HIRD
-+ * to be sent in an LPM transaction.
-+ * In Device mode this field is updated with the
-+ * Received LPM Token HIRD bmAttribute
-+ * when an ACK/NYET/STALL response is sent
-+ * to an LPM transaction.
-+ */
-+ unsigned hird:4;
-+ /** RemoteWakeEnable (bRemoteWake) (Device and Host)
-+ * In Host mode this bit indicates the value of remote
-+ * wake up to be sent in wIndex field of LPM transaction.
-+ * In Device mode this field is updated with the
-+ * Received LPM Token bRemoteWake bmAttribute
-+ * when an ACK/NYET/STALL response is sent
-+ * to an LPM transaction.
-+ */
-+ unsigned rem_wkup_en:1;
-+ /** Enable utmi_sleep_n (EnblSlpM) (Device and Host)
-+ * The application uses this bit to control
-+ * the utmi_sleep_n assertion to the PHY when in L1 state.
-+ */
-+ unsigned en_utmi_sleep:1;
-+ /** HIRD Threshold (HIRD_Thres) (Device and Host)
-+ */
-+ unsigned hird_thres:5;
-+ /** LPM Response (CoreL1Res) (Device and Host)
-+ * In Host mode this bit contains handsake response to
-+ * LPM transaction.
-+ * In Device mode the response of the core to
-+ * LPM transaction received is reflected in these two bits.
-+ - 0x0 : ERROR (No handshake response)
-+ - 0x1 : STALL
-+ - 0x2 : NYET
-+ - 0x3 : ACK
-+ */
-+ unsigned lpm_resp:2;
-+ /** Port Sleep Status (SlpSts) (Device and Host)
-+ * This bit is set as long as a Sleep condition
-+ * is present on the USB bus.
-+ */
-+ unsigned prt_sleep_sts:1;
-+ /** Sleep State Resume OK (L1ResumeOK) (Device and Host)
-+ * Indicates that the application or host
-+ * can start resume from Sleep state.
-+ */
-+ unsigned sleep_state_resumeok:1;
-+ /** LPM channel Index (LPM_Chnl_Indx) (Host)
-+ * The channel number on which the LPM transaction
-+ * has to be applied while sending
-+ * an LPM transaction to the local device.
-+ */
-+ unsigned lpm_chan_index:4;
-+ /** LPM Retry Count (LPM_Retry_Cnt) (Host)
-+ * Number host retries that would be performed
-+ * if the device response was not valid response.
-+ */
-+ unsigned retry_count:3;
-+ /** Send LPM Transaction (SndLPM) (Host)
-+ * When set by application software,
-+ * an LPM transaction containing two tokens
-+ * is sent.
-+ */
-+ unsigned send_lpm:1;
-+ /** LPM Retry status (LPM_RetryCnt_Sts) (Host)
-+ * Number of LPM Host Retries still remaining
-+ * to be transmitted for the current LPM sequence
-+ */
-+ unsigned retry_count_sts:3;
-+ unsigned reserved28_29:2;
-+ /** In host mode once this bit is set, the host
-+ * configures to drive the HSIC Idle state on the bus.
-+ * It then waits for the device to initiate the Connect sequence.
-+ * In device mode once this bit is set, the device waits for
-+ * the HSIC Idle line state on the bus. Upon receving the Idle
-+ * line state, it initiates the HSIC Connect sequence.
-+ */
-+ unsigned hsic_connect:1;
-+ /** This bit overrides and functionally inverts
-+ * the if_select_hsic input port signal.
-+ */
-+ unsigned inv_sel_hsic:1;
-+ } b;
-+} glpmcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields of the Core ADP Timer, Control and
-+ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write
-+ * the <i>d32</i> value to the register.
-+ */
-+typedef union adpctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Probe Discharge (PRB_DSCHG)
-+ * These bits set the times for TADP_DSCHG.
-+ * These bits are defined as follows:
-+ * 2'b00 - 4 msec
-+ * 2'b01 - 8 msec
-+ * 2'b10 - 16 msec
-+ * 2'b11 - 32 msec
-+ */
-+ unsigned prb_dschg:2;
-+ /** Probe Delta (PRB_DELTA)
-+ * These bits set the resolution for RTIM value.
-+ * The bits are defined in units of 32 kHz clock cycles as follows:
-+ * 2'b00 - 1 cycles
-+ * 2'b01 - 2 cycles
-+ * 2'b10 - 3 cycles
-+ * 2'b11 - 4 cycles
-+ * For example if this value is chosen to 2'b01, it means that RTIM
-+ * increments for every 3(three) 32Khz clock cycles.
-+ */
-+ unsigned prb_delta:2;
-+ /** Probe Period (PRB_PER)
-+ * These bits sets the TADP_PRD as shown in Figure 4 as follows:
-+ * 2'b00 - 0.625 to 0.925 sec (typical 0.775 sec)
-+ * 2'b01 - 1.25 to 1.85 sec (typical 1.55 sec)
-+ * 2'b10 - 1.9 to 2.6 sec (typical 2.275 sec)
-+ * 2'b11 - Reserved
-+ */
-+ unsigned prb_per:2;
-+ /** These bits capture the latest time it took for VBUS to ramp from
-+ * VADP_SINK to VADP_PRB.
-+ * 0x000 - 1 cycles
-+ * 0x001 - 2 cycles
-+ * 0x002 - 3 cycles
-+ * etc
-+ * 0x7FF - 2048 cycles
-+ * A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec.
-+ */
-+ unsigned rtim:11;
-+ /** Enable Probe (EnaPrb)
-+ * When programmed to 1'b1, the core performs a probe operation.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned enaprb:1;
-+ /** Enable Sense (EnaSns)
-+ * When programmed to 1'b1, the core performs a Sense operation.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned enasns:1;
-+ /** ADP Reset (ADPRes)
-+ * When set, ADP controller is reset.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adpres:1;
-+ /** ADP Enable (ADPEn)
-+ * When set, the core performs either ADP probing or sensing
-+ * based on EnaPrb or EnaSns.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adpen:1;
-+ /** ADP Probe Interrupt (ADP_PRB_INT)
-+ * When this bit is set, it means that the VBUS
-+ * voltage is greater than VADP_PRB or VADP_PRB is reached.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adp_prb_int:1;
-+ /**
-+ * ADP Sense Interrupt (ADP_SNS_INT)
-+ * When this bit is set, it means that the VBUS voltage is greater than
-+ * VADP_SNS value or VADP_SNS is reached.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adp_sns_int:1;
-+ /** ADP Tomeout Interrupt (ADP_TMOUT_INT)
-+ * This bit is relevant only for an ADP probe.
-+ * When this bit is set, it means that the ramp time has
-+ * completed ie ADPCTL.RTIM has reached its terminal value
-+ * of 0x7FF. This is a debug feature that allows software
-+ * to read the ramp time after each cycle.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adp_tmout_int:1;
-+ /** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK)
-+ * When this bit is set, it unmasks the interrupt due to ADP_PRB_INT.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adp_prb_int_msk:1;
-+ /** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK)
-+ * When this bit is set, it unmasks the interrupt due to ADP_SNS_INT.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adp_sns_int_msk:1;
-+ /** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK)
-+ * When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT.
-+ * This bit is valid only if OTG_Ver = 1'b1.
-+ */
-+ unsigned adp_tmout_int_msk:1;
-+ /** Access Request
-+ * 2'b00 - Read/Write Valid (updated by the core)
-+ * 2'b01 - Read
-+ * 2'b00 - Write
-+ * 2'b00 - Reserved
-+ */
-+ unsigned ar:2;
-+ /** Reserved */
-+ unsigned reserved29_31:3;
-+ } b;
-+} adpctl_data_t;
-+
-+////////////////////////////////////////////
-+// Device Registers
-+/**
-+ * Device Global Registers. <i>Offsets 800h-BFFh</i>
-+ *
-+ * The following structures define the size and relative field offsets
-+ * for the Device Mode Registers.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_global_regs {
-+ /** Device Configuration Register. <i>Offset 800h</i> */
-+ volatile uint32_t dcfg;
-+ /** Device Control Register. <i>Offset: 804h</i> */
-+ volatile uint32_t dctl;
-+ /** Device Status Register (Read Only). <i>Offset: 808h</i> */
-+ volatile uint32_t dsts;
-+ /** Reserved. <i>Offset: 80Ch</i> */
-+ uint32_t unused;
-+ /** Device IN Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 810h</i> */
-+ volatile uint32_t diepmsk;
-+ /** Device OUT Endpoint Common Interrupt Mask
-+ * Register. <i>Offset: 814h</i> */
-+ volatile uint32_t doepmsk;
-+ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */
-+ volatile uint32_t daint;
-+ /** Device All Endpoints Interrupt Mask Register. <i>Offset:
-+ * 81Ch</i> */
-+ volatile uint32_t daintmsk;
-+ /** Device IN Token Queue Read Register-1 (Read Only).
-+ * <i>Offset: 820h</i> */
-+ volatile uint32_t dtknqr1;
-+ /** Device IN Token Queue Read Register-2 (Read Only).
-+ * <i>Offset: 824h</i> */
-+ volatile uint32_t dtknqr2;
-+ /** Device VBUS discharge Register. <i>Offset: 828h</i> */
-+ volatile uint32_t dvbusdis;
-+ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */
-+ volatile uint32_t dvbuspulse;
-+ /** Device IN Token Queue Read Register-3 (Read Only). /
-+ * Device Thresholding control register (Read/Write)
-+ * <i>Offset: 830h</i> */
-+ volatile uint32_t dtknqr3_dthrctl;
-+ /** Device IN Token Queue Read Register-4 (Read Only). /
-+ * Device IN EPs empty Inr. Mask Register (Read/Write)
-+ * <i>Offset: 834h</i> */
-+ volatile uint32_t dtknqr4_fifoemptymsk;
-+ /** Device Each Endpoint Interrupt Register (Read Only). /
-+ * <i>Offset: 838h</i> */
-+ volatile uint32_t deachint;
-+ /** Device Each Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 83Ch</i> */
-+ volatile uint32_t deachintmsk;
-+ /** Device Each In Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 840h</i> */
-+ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
-+ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
-+ * <i>Offset: 880h</i> */
-+ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
-+} dwc_otg_device_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Configuration
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements. Write the
-+ * <i>d32</i> member to the dcfg register.
-+ */
-+typedef union dcfg_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Device Speed */
-+ unsigned devspd:2;
-+ /** Non Zero Length Status OUT Handshake */
-+ unsigned nzstsouthshk:1;
-+#define DWC_DCFG_SEND_STALL 1
-+
-+ unsigned ena32khzs:1;
-+ /** Device Addresses */
-+ unsigned devaddr:7;
-+ /** Periodic Frame Interval */
-+ unsigned perfrint:2;
-+#define DWC_DCFG_FRAME_INTERVAL_80 0
-+#define DWC_DCFG_FRAME_INTERVAL_85 1
-+#define DWC_DCFG_FRAME_INTERVAL_90 2
-+#define DWC_DCFG_FRAME_INTERVAL_95 3
-+
-+ /** Enable Device OUT NAK for bulk in DDMA mode */
-+ unsigned endevoutnak:1;
-+
-+ unsigned reserved14_17:4;
-+ /** In Endpoint Mis-match count */
-+ unsigned epmscnt:5;
-+ /** Enable Descriptor DMA in Device mode */
-+ unsigned descdma:1;
-+ unsigned perschintvl:2;
-+ unsigned resvalid:6;
-+ } b;
-+} dcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Remote Wakeup */
-+ unsigned rmtwkupsig:1;
-+ /** Soft Disconnect */
-+ unsigned sftdiscon:1;
-+ /** Global Non-Periodic IN NAK Status */
-+ unsigned gnpinnaksts:1;
-+ /** Global OUT NAK Status */
-+ unsigned goutnaksts:1;
-+ /** Test Control */
-+ unsigned tstctl:3;
-+ /** Set Global Non-Periodic IN NAK */
-+ unsigned sgnpinnak:1;
-+ /** Clear Global Non-Periodic IN NAK */
-+ unsigned cgnpinnak:1;
-+ /** Set Global OUT NAK */
-+ unsigned sgoutnak:1;
-+ /** Clear Global OUT NAK */
-+ unsigned cgoutnak:1;
-+ /** Power-On Programming Done */
-+ unsigned pwronprgdone:1;
-+ /** Reserved */
-+ unsigned reserved:1;
-+ /** Global Multi Count */
-+ unsigned gmc:2;
-+ /** Ignore Frame Number for ISOC EPs */
-+ unsigned ifrmnum:1;
-+ /** NAK on Babble */
-+ unsigned nakonbble:1;
-+ /** Enable Continue on BNA */
-+ unsigned encontonbna:1;
-+
-+ unsigned reserved18_31:14;
-+ } b;
-+} dctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device Status
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union dsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Suspend Status */
-+ unsigned suspsts:1;
-+ /** Enumerated Speed */
-+ unsigned enumspd:2;
-+#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
-+#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
-+#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2
-+#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3
-+ /** Erratic Error */
-+ unsigned errticerr:1;
-+ unsigned reserved4_7:4;
-+ /** Frame or Microframe Number of the received SOF */
-+ unsigned soffn:14;
-+ unsigned reserved22_31:10;
-+ } b;
-+} dsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP Interrupt
-+ * Register and the Device IN EP Common Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union diepint_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer complete mask */
-+ unsigned xfercompl:1;
-+ /** Endpoint disable mask */
-+ unsigned epdisabled:1;
-+ /** AHB Error mask */
-+ unsigned ahberr:1;
-+ /** TimeOUT Handshake mask (non-ISOC EPs) */
-+ unsigned timeout:1;
-+ /** IN Token received with TxF Empty mask */
-+ unsigned intktxfemp:1;
-+ /** IN Token Received with EP mismatch mask */
-+ unsigned intknepmis:1;
-+ /** IN Endpoint NAK Effective mask */
-+ unsigned inepnakeff:1;
-+ /** Reserved */
-+ unsigned emptyintr:1;
-+
-+ unsigned txfifoundrn:1;
-+
-+ /** BNA Interrupt mask */
-+ unsigned bna:1;
-+
-+ unsigned reserved10_12:3;
-+ /** BNA Interrupt mask */
-+ unsigned nak:1;
-+
-+ unsigned reserved14_31:18;
-+ } b;
-+} diepint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN EP
-+ * Common/Dedicated Interrupt Mask Register.
-+ */
-+typedef union diepint_data diepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP Interrupt
-+ * Registerand Device OUT EP Common Interrupt Mask Register.
-+ *
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union doepint_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer complete */
-+ unsigned xfercompl:1;
-+ /** Endpoint disable */
-+ unsigned epdisabled:1;
-+ /** AHB Error */
-+ unsigned ahberr:1;
-+ /** Setup Phase Done (contorl EPs) */
-+ unsigned setup:1;
-+ /** OUT Token Received when Endpoint Disabled */
-+ unsigned outtknepdis:1;
-+
-+ unsigned stsphsercvd:1;
-+ /** Back-to-Back SETUP Packets Received */
-+ unsigned back2backsetup:1;
-+
-+ unsigned reserved7:1;
-+ /** OUT packet Error */
-+ unsigned outpkterr:1;
-+ /** BNA Interrupt */
-+ unsigned bna:1;
-+
-+ unsigned reserved10:1;
-+ /** Packet Drop Status */
-+ unsigned pktdrpsts:1;
-+ /** Babble Interrupt */
-+ unsigned babble:1;
-+ /** NAK Interrupt */
-+ unsigned nak:1;
-+ /** NYET Interrupt */
-+ unsigned nyet:1;
-+ /** Bit indicating setup packet received */
-+ unsigned sr:1;
-+
-+ unsigned reserved16_31:16;
-+ } b;
-+} doepint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device OUT EP
-+ * Common/Dedicated Interrupt Mask Register.
-+ */
-+typedef union doepint_data doepmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device All EP Interrupt
-+ * and Mask Registers.
-+ * - Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union daint_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** IN Endpoint bits */
-+ unsigned in:16;
-+ /** OUT Endpoint bits */
-+ unsigned out:16;
-+ } ep;
-+ struct {
-+ /** IN Endpoint bits */
-+ unsigned inep0:1;
-+ unsigned inep1:1;
-+ unsigned inep2:1;
-+ unsigned inep3:1;
-+ unsigned inep4:1;
-+ unsigned inep5:1;
-+ unsigned inep6:1;
-+ unsigned inep7:1;
-+ unsigned inep8:1;
-+ unsigned inep9:1;
-+ unsigned inep10:1;
-+ unsigned inep11:1;
-+ unsigned inep12:1;
-+ unsigned inep13:1;
-+ unsigned inep14:1;
-+ unsigned inep15:1;
-+ /** OUT Endpoint bits */
-+ unsigned outep0:1;
-+ unsigned outep1:1;
-+ unsigned outep2:1;
-+ unsigned outep3:1;
-+ unsigned outep4:1;
-+ unsigned outep5:1;
-+ unsigned outep6:1;
-+ unsigned outep7:1;
-+ unsigned outep8:1;
-+ unsigned outep9:1;
-+ unsigned outep10:1;
-+ unsigned outep11:1;
-+ unsigned outep12:1;
-+ unsigned outep13:1;
-+ unsigned outep14:1;
-+ unsigned outep15:1;
-+ } b;
-+} daint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device IN Token Queue
-+ * Read Registers.
-+ * - Read the register into the <i>d32</i> member.
-+ * - READ-ONLY Register
-+ */
-+typedef union dtknq1_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** In Token Queue Write Pointer */
-+ unsigned intknwptr:5;
-+ /** Reserved */
-+ unsigned reserved05_06:2;
-+ /** write pointer has wrapped. */
-+ unsigned wrap_bit:1;
-+ /** EP Numbers of IN Tokens 0 ... 4 */
-+ unsigned epnums0_5:24;
-+ } b;
-+} dtknq1_data_t;
-+
-+/**
-+ * This union represents Threshold control Register
-+ * - Read and write the register into the <i>d32</i> member.
-+ * - READ-WRITABLE Register
-+ */
-+typedef union dthrctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** non ISO Tx Thr. Enable */
-+ unsigned non_iso_thr_en:1;
-+ /** ISO Tx Thr. Enable */
-+ unsigned iso_thr_en:1;
-+ /** Tx Thr. Length */
-+ unsigned tx_thr_len:9;
-+ /** AHB Threshold ratio */
-+ unsigned ahb_thr_ratio:2;
-+ /** Reserved */
-+ unsigned reserved13_15:3;
-+ /** Rx Thr. Enable */
-+ unsigned rx_thr_en:1;
-+ /** Rx Thr. Length */
-+ unsigned rx_thr_len:9;
-+ unsigned reserved26:1;
-+ /** Arbiter Parking Enable*/
-+ unsigned arbprken:1;
-+ /** Reserved */
-+ unsigned reserved28_31:4;
-+ } b;
-+} dthrctl_data_t;
-+
-+/**
-+ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
-+ * 900h-AFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_in_ep_regs {
-+ /** Device IN Endpoint Control Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t diepctl;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
-+ uint32_t reserved04;
-+ /** Device IN Endpoint Interrupt Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t diepint;
-+ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device IN Endpoint Transfer Size
-+ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t dieptsiz;
-+ /** Device IN Endpoint DMA Address Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t diepdma;
-+ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 18h</i> */
-+ volatile uint32_t dtxfsts;
-+ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
-+ * (ep_num * 20h) + 1Ch</i> */
-+ volatile uint32_t diepdmab;
-+} dwc_otg_dev_in_ep_regs_t;
-+
-+/**
-+ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
-+ * B00h-CFCh</i>
-+ *
-+ * There will be one set of endpoint registers per logical endpoint
-+ * implemented.
-+ *
-+ * <i>These registers are visible only in Device mode and must not be
-+ * accessed in Host mode, as the results are unknown.</i>
-+ */
-+typedef struct dwc_otg_dev_out_ep_regs {
-+ /** Device OUT Endpoint Control Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 00h</i> */
-+ volatile uint32_t doepctl;
-+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */
-+ uint32_t reserved04;
-+ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
-+ * (ep_num * 20h) + 08h</i> */
-+ volatile uint32_t doepint;
-+ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
-+ uint32_t reserved0C;
-+ /** Device OUT Endpoint Transfer Size Register. <i>Offset:
-+ * B00h + (ep_num * 20h) + 10h</i> */
-+ volatile uint32_t doeptsiz;
-+ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 14h</i> */
-+ volatile uint32_t doepdma;
-+ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 18h</i> */
-+ uint32_t unused;
-+ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
-+ * + (ep_num * 20h) + 1Ch</i> */
-+ uint32_t doepdmab;
-+} dwc_otg_dev_out_ep_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Control
-+ * Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union depctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Maximum Packet Size
-+ * IN/OUT EPn
-+ * IN/OUT EP0 - 2 bits
-+ * 2'b00: 64 Bytes
-+ * 2'b01: 32
-+ * 2'b10: 16
-+ * 2'b11: 8 */
-+ unsigned mps:11;
-+#define DWC_DEP0CTL_MPS_64 0
-+#define DWC_DEP0CTL_MPS_32 1
-+#define DWC_DEP0CTL_MPS_16 2
-+#define DWC_DEP0CTL_MPS_8 3
-+
-+ /** Next Endpoint
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned nextep:4;
-+
-+ /** USB Active Endpoint */
-+ unsigned usbactep:1;
-+
-+ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
-+ * This field contains the PID of the packet going to
-+ * be received or transmitted on this endpoint. The
-+ * application should program the PID of the first
-+ * packet going to be received or transmitted on this
-+ * endpoint , after the endpoint is
-+ * activated. Application use the SetD1PID and
-+ * SetD0PID fields of this register to program either
-+ * D0 or D1 PID.
-+ *
-+ * The encoding for this field is
-+ * - 0: D0
-+ * - 1: D1
-+ */
-+ unsigned dpid:1;
-+
-+ /** NAK Status */
-+ unsigned naksts:1;
-+
-+ /** Endpoint Type
-+ * 2'b00: Control
-+ * 2'b01: Isochronous
-+ * 2'b10: Bulk
-+ * 2'b11: Interrupt */
-+ unsigned eptype:2;
-+
-+ /** Snoop Mode
-+ * OUT EPn/OUT EP0
-+ * IN EPn/IN EP0 - reserved */
-+ unsigned snp:1;
-+
-+ /** Stall Handshake */
-+ unsigned stall:1;
-+
-+ /** Tx Fifo Number
-+ * IN EPn/IN EP0
-+ * OUT EPn/OUT EP0 - reserved */
-+ unsigned txfnum:4;
-+
-+ /** Clear NAK */
-+ unsigned cnak:1;
-+ /** Set NAK */
-+ unsigned snak:1;
-+ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA0. Set Even
-+ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to even (micro)
-+ * frame.
-+ */
-+ unsigned setd0pid:1;
-+ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
-+ * Writing to this field sets the Endpoint DPID (DPID)
-+ * field in this register to DATA1 Set Odd
-+ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
-+ * Writing to this field sets the Even/Odd
-+ * (micro)frame (EO_FrNum) field to odd (micro) frame.
-+ */
-+ unsigned setd1pid:1;
-+
-+ /** Endpoint Disable */
-+ unsigned epdis:1;
-+ /** Endpoint Enable */
-+ unsigned epena:1;
-+ } b;
-+} depctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer size */
-+ unsigned xfersize:19;
-+/** Max packet count for EP (pow(2,10)-1) */
-+#define MAX_PKT_CNT 1023
-+ /** Packet Count */
-+ unsigned pktcnt:10;
-+ /** Multi Count - Periodic IN endpoints */
-+ unsigned mc:2;
-+ unsigned reserved:1;
-+ } b;
-+} deptsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Device EP 0 Transfer
-+ * Size Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union deptsiz0_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer size */
-+ unsigned xfersize:7;
-+ /** Reserved */
-+ unsigned reserved7_18:12;
-+ /** Packet Count */
-+ unsigned pktcnt:2;
-+ /** Reserved */
-+ unsigned reserved21_28:8;
-+ /**Setup Packet Count (DOEPTSIZ0 Only) */
-+ unsigned supcnt:2;
-+ unsigned reserved31;
-+ } b;
-+} deptsiz0_data_t;
-+
-+/////////////////////////////////////////////////
-+// DMA Descriptor Specific Structures
-+//
-+
-+/** Buffer status definitions */
-+
-+#define BS_HOST_READY 0x0
-+#define BS_DMA_BUSY 0x1
-+#define BS_DMA_DONE 0x2
-+#define BS_HOST_BUSY 0x3
-+
-+/** Receive/Transmit status definitions */
-+
-+#define RTS_SUCCESS 0x0
-+#define RTS_BUFFLUSH 0x1
-+#define RTS_RESERVED 0x2
-+#define RTS_BUFERR 0x3
-+
-+/**
-+ * This union represents the bit fields in the DMA Descriptor
-+ * status quadlet. Read the quadlet into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
-+ * <i>b_iso_in</i> elements.
-+ */
-+typedef union dev_dma_desc_sts {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** quadlet bits */
-+ struct {
-+ /** Received number of bytes */
-+ unsigned bytes:16;
-+ /** NAK bit - only for OUT EPs */
-+ unsigned nak:1;
-+ unsigned reserved17_22:6;
-+ /** Multiple Transfer - only for OUT EPs */
-+ unsigned mtrf:1;
-+ /** Setup Packet received - only for OUT EPs */
-+ unsigned sr:1;
-+ /** Interrupt On Complete */
-+ unsigned ioc:1;
-+ /** Short Packet */
-+ unsigned sp:1;
-+ /** Last */
-+ unsigned l:1;
-+ /** Receive Status */
-+ unsigned sts:2;
-+ /** Buffer Status */
-+ unsigned bs:2;
-+ } b;
-+
-+//#ifdef DWC_EN_ISOC
-+ /** iso out quadlet bits */
-+ struct {
-+ /** Received number of bytes */
-+ unsigned rxbytes:11;
-+
-+ unsigned reserved11:1;
-+ /** Frame Number */
-+ unsigned framenum:11;
-+ /** Received ISO Data PID */
-+ unsigned pid:2;
-+ /** Interrupt On Complete */
-+ unsigned ioc:1;
-+ /** Short Packet */
-+ unsigned sp:1;
-+ /** Last */
-+ unsigned l:1;
-+ /** Receive Status */
-+ unsigned rxsts:2;
-+ /** Buffer Status */
-+ unsigned bs:2;
-+ } b_iso_out;
-+
-+ /** iso in quadlet bits */
-+ struct {
-+ /** Transmited number of bytes */
-+ unsigned txbytes:12;
-+ /** Frame Number */
-+ unsigned framenum:11;
-+ /** Transmited ISO Data PID */
-+ unsigned pid:2;
-+ /** Interrupt On Complete */
-+ unsigned ioc:1;
-+ /** Short Packet */
-+ unsigned sp:1;
-+ /** Last */
-+ unsigned l:1;
-+ /** Transmit Status */
-+ unsigned txsts:2;
-+ /** Buffer Status */
-+ unsigned bs:2;
-+ } b_iso_in;
-+//#endif /* DWC_EN_ISOC */
-+} dev_dma_desc_sts_t;
-+
-+/**
-+ * DMA Descriptor structure
-+ *
-+ * DMA Descriptor structure contains two quadlets:
-+ * Status quadlet and Data buffer pointer.
-+ */
-+typedef struct dwc_otg_dev_dma_desc {
-+ /** DMA Descriptor status quadlet */
-+ dev_dma_desc_sts_t status;
-+ /** DMA Descriptor data buffer pointer */
-+ uint32_t buf;
-+} dwc_otg_dev_dma_desc_t;
-+
-+/**
-+ * The dwc_otg_dev_if structure contains information needed to manage
-+ * the DWC_otg controller acting in device mode. It represents the
-+ * programming view of the device-specific aspects of the controller.
-+ */
-+typedef struct dwc_otg_dev_if {
-+ /** Pointer to device Global registers.
-+ * Device Global Registers starting at offset 800h
-+ */
-+ dwc_otg_device_global_regs_t *dev_global_regs;
-+#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
-+
-+ /**
-+ * Device Logical IN Endpoint-Specific Registers 900h-AFCh
-+ */
-+ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_IN_EP_REG_OFFSET 0x900
-+#define DWC_EP_REG_OFFSET 0x20
-+
-+ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
-+ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
-+#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
-+
-+ /* Device configuration information */
-+ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */
-+ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */
-+ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/
-+
-+ /** Size of periodic FIFOs (Bytes) */
-+ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
-+
-+ /** Size of Tx FIFOs (Bytes) */
-+ uint16_t tx_fifo_size[MAX_TX_FIFOS];
-+
-+ /** Thresholding enable flags and length varaiables **/
-+ uint16_t rx_thr_en;
-+ uint16_t iso_tx_thr_en;
-+ uint16_t non_iso_tx_thr_en;
-+
-+ uint16_t rx_thr_length;
-+ uint16_t tx_thr_length;
-+
-+ /**
-+ * Pointers to the DMA Descriptors for EP0 Control
-+ * transfers (virtual and physical)
-+ */
-+
-+ /** 2 descriptors for SETUP packets */
-+ dwc_dma_t dma_setup_desc_addr[2];
-+ dwc_otg_dev_dma_desc_t *setup_desc_addr[2];
-+
-+ /** Pointer to Descriptor with latest SETUP packet */
-+ dwc_otg_dev_dma_desc_t *psetup;
-+
-+ /** Index of current SETUP handler descriptor */
-+ uint32_t setup_desc_index;
-+
-+ /** Descriptor for Data In or Status In phases */
-+ dwc_dma_t dma_in_desc_addr;
-+ dwc_otg_dev_dma_desc_t *in_desc_addr;
-+
-+ /** Descriptor for Data Out or Status Out phases */
-+ dwc_dma_t dma_out_desc_addr;
-+ dwc_otg_dev_dma_desc_t *out_desc_addr;
-+
-+ /** Setup Packet Detected - if set clear NAK when queueing */
-+ uint32_t spd;
-+ /** Isoc ep pointer on which incomplete happens */
-+ void *isoc_ep;
-+
-+} dwc_otg_dev_if_t;
-+
-+/////////////////////////////////////////////////
-+// Host Mode Register Structures
-+//
-+/**
-+ * The Host Global Registers structure defines the size and relative
-+ * field offsets for the Host Mode Global Registers. Host Global
-+ * Registers offsets 400h-7FFh.
-+*/
-+typedef struct dwc_otg_host_global_regs {
-+ /** Host Configuration Register. <i>Offset: 400h</i> */
-+ volatile uint32_t hcfg;
-+ /** Host Frame Interval Register. <i>Offset: 404h</i> */
-+ volatile uint32_t hfir;
-+ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
-+ volatile uint32_t hfnum;
-+ /** Reserved. <i>Offset: 40Ch</i> */
-+ uint32_t reserved40C;
-+ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
-+ volatile uint32_t hptxsts;
-+ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
-+ volatile uint32_t haint;
-+ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
-+ volatile uint32_t haintmsk;
-+ /** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */
-+ volatile uint32_t hflbaddr;
-+} dwc_otg_host_global_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Configuration Register.
-+ * Read the register into the <i>d32</i> member then set/clear the bits using
-+ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
-+ */
-+typedef union hcfg_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** FS/LS Phy Clock Select */
-+ unsigned fslspclksel:2;
-+#define DWC_HCFG_30_60_MHZ 0
-+#define DWC_HCFG_48_MHZ 1
-+#define DWC_HCFG_6_MHZ 2
-+
-+ /** FS/LS Only Support */
-+ unsigned fslssupp:1;
-+ unsigned reserved3_6:4;
-+ /** Enable 32-KHz Suspend Mode */
-+ unsigned ena32khzs:1;
-+ /** Resume Validation Periiod */
-+ unsigned resvalid:8;
-+ unsigned reserved16_22:7;
-+ /** Enable Scatter/gather DMA in Host mode */
-+ unsigned descdma:1;
-+ /** Frame List Entries */
-+ unsigned frlisten:2;
-+ /** Enable Periodic Scheduling */
-+ unsigned perschedena:1;
-+ unsigned reserved27_30:4;
-+ unsigned modechtimen:1;
-+ } b;
-+} hcfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfir_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned frint:16;
-+ unsigned hfirrldctrl:1;
-+ unsigned reserved:15;
-+ } b;
-+} hfir_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Frame Remaing/Number
-+ * Register.
-+ */
-+typedef union hfnum_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned frnum:16;
-+#define DWC_HFNUM_MAX_FRNUM 0x3FFF
-+ unsigned frrem:16;
-+ } b;
-+} hfnum_data_t;
-+
-+typedef union hptxsts_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned ptxfspcavail:16;
-+ unsigned ptxqspcavail:8;
-+ /** Top of the Periodic Transmit Request Queue
-+ * - bit 24 - Terminate (last entry for the selected channel)
-+ * - bits 26:25 - Token Type
-+ * - 2'b00 - Zero length
-+ * - 2'b01 - Ping
-+ * - 2'b10 - Disable
-+ * - bits 30:27 - Channel Number
-+ * - bit 31 - Odd/even microframe
-+ */
-+ unsigned ptxqtop_terminate:1;
-+ unsigned ptxqtop_token:2;
-+ unsigned ptxqtop_chnum:4;
-+ unsigned ptxqtop_odd:1;
-+ } b;
-+} hptxsts_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Port Control and Status
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hprt0 register.
-+ */
-+typedef union hprt0_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned prtconnsts:1;
-+ unsigned prtconndet:1;
-+ unsigned prtena:1;
-+ unsigned prtenchng:1;
-+ unsigned prtovrcurract:1;
-+ unsigned prtovrcurrchng:1;
-+ unsigned prtres:1;
-+ unsigned prtsusp:1;
-+ unsigned prtrst:1;
-+ unsigned reserved9:1;
-+ unsigned prtlnsts:2;
-+ unsigned prtpwr:1;
-+ unsigned prttstctl:4;
-+ unsigned prtspd:2;
-+#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
-+#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
-+#define DWC_HPRT0_PRTSPD_LOW_SPEED 2
-+ unsigned reserved19_31:13;
-+ } b;
-+} hprt0_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haint_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned ch0:1;
-+ unsigned ch1:1;
-+ unsigned ch2:1;
-+ unsigned ch3:1;
-+ unsigned ch4:1;
-+ unsigned ch5:1;
-+ unsigned ch6:1;
-+ unsigned ch7:1;
-+ unsigned ch8:1;
-+ unsigned ch9:1;
-+ unsigned ch10:1;
-+ unsigned ch11:1;
-+ unsigned ch12:1;
-+ unsigned ch13:1;
-+ unsigned ch14:1;
-+ unsigned ch15:1;
-+ unsigned reserved:16;
-+ } b;
-+
-+ struct {
-+ unsigned chint:16;
-+ unsigned reserved:16;
-+ } b2;
-+} haint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union haintmsk_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned ch0:1;
-+ unsigned ch1:1;
-+ unsigned ch2:1;
-+ unsigned ch3:1;
-+ unsigned ch4:1;
-+ unsigned ch5:1;
-+ unsigned ch6:1;
-+ unsigned ch7:1;
-+ unsigned ch8:1;
-+ unsigned ch9:1;
-+ unsigned ch10:1;
-+ unsigned ch11:1;
-+ unsigned ch12:1;
-+ unsigned ch13:1;
-+ unsigned ch14:1;
-+ unsigned ch15:1;
-+ unsigned reserved:16;
-+ } b;
-+
-+ struct {
-+ unsigned chint:16;
-+ unsigned reserved:16;
-+ } b2;
-+} haintmsk_data_t;
-+
-+/**
-+ * Host Channel Specific Registers. <i>500h-5FCh</i>
-+ */
-+typedef struct dwc_otg_hc_regs {
-+ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
-+ volatile uint32_t hcchar;
-+ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
-+ volatile uint32_t hcsplt;
-+ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
-+ volatile uint32_t hcint;
-+ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
-+ volatile uint32_t hcintmsk;
-+ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
-+ volatile uint32_t hctsiz;
-+ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
-+ volatile uint32_t hcdma;
-+ volatile uint32_t reserved;
-+ /** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */
-+ volatile uint32_t hcdmab;
-+} dwc_otg_hc_regs_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Characteristics
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+typedef union hcchar_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Maximum packet size in bytes */
-+ unsigned mps:11;
-+
-+ /** Endpoint number */
-+ unsigned epnum:4;
-+
-+ /** 0: OUT, 1: IN */
-+ unsigned epdir:1;
-+
-+ unsigned reserved:1;
-+
-+ /** 0: Full/high speed device, 1: Low speed device */
-+ unsigned lspddev:1;
-+
-+ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
-+ unsigned eptype:2;
-+
-+ /** Packets per frame for periodic transfers. 0 is reserved. */
-+ unsigned multicnt:2;
-+
-+ /** Device address */
-+ unsigned devaddr:7;
-+
-+ /**
-+ * Frame to transmit periodic transaction.
-+ * 0: even, 1: odd
-+ */
-+ unsigned oddfrm:1;
-+
-+ /** Channel disable */
-+ unsigned chdis:1;
-+
-+ /** Channel enable */
-+ unsigned chen:1;
-+ } b;
-+} hcchar_data_t;
-+
-+typedef union hcsplt_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Port Address */
-+ unsigned prtaddr:7;
-+
-+ /** Hub Address */
-+ unsigned hubaddr:7;
-+
-+ /** Transaction Position */
-+ unsigned xactpos:2;
-+#define DWC_HCSPLIT_XACTPOS_MID 0
-+#define DWC_HCSPLIT_XACTPOS_END 1
-+#define DWC_HCSPLIT_XACTPOS_BEGIN 2
-+#define DWC_HCSPLIT_XACTPOS_ALL 3
-+
-+ /** Do Complete Split */
-+ unsigned compsplt:1;
-+
-+ /** Reserved */
-+ unsigned reserved:14;
-+
-+ /** Split Enble */
-+ unsigned spltena:1;
-+ } b;
-+} hcsplt_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host All Interrupt
-+ * Register.
-+ */
-+typedef union hcint_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** Transfer Complete */
-+ unsigned xfercomp:1;
-+ /** Channel Halted */
-+ unsigned chhltd:1;
-+ /** AHB Error */
-+ unsigned ahberr:1;
-+ /** STALL Response Received */
-+ unsigned stall:1;
-+ /** NAK Response Received */
-+ unsigned nak:1;
-+ /** ACK Response Received */
-+ unsigned ack:1;
-+ /** NYET Response Received */
-+ unsigned nyet:1;
-+ /** Transaction Err */
-+ unsigned xacterr:1;
-+ /** Babble Error */
-+ unsigned bblerr:1;
-+ /** Frame Overrun */
-+ unsigned frmovrun:1;
-+ /** Data Toggle Error */
-+ unsigned datatglerr:1;
-+ /** Buffer Not Available (only for DDMA mode) */
-+ unsigned bna:1;
-+ /** Exessive transaction error (only for DDMA mode) */
-+ unsigned xcs_xact:1;
-+ /** Frame List Rollover interrupt */
-+ unsigned frm_list_roll:1;
-+ /** Reserved */
-+ unsigned reserved14_31:18;
-+ } b;
-+} hcint_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Interrupt Mask
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcintmsk register.
-+ */
-+typedef union hcintmsk_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ unsigned xfercompl:1;
-+ unsigned chhltd:1;
-+ unsigned ahberr:1;
-+ unsigned stall:1;
-+ unsigned nak:1;
-+ unsigned ack:1;
-+ unsigned nyet:1;
-+ unsigned xacterr:1;
-+ unsigned bblerr:1;
-+ unsigned frmovrun:1;
-+ unsigned datatglerr:1;
-+ unsigned bna:1;
-+ unsigned xcs_xact:1;
-+ unsigned frm_list_roll:1;
-+ unsigned reserved14_31:18;
-+ } b;
-+} hcintmsk_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host Channel Transfer Size
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
-+ * hcchar register.
-+ */
-+
-+typedef union hctsiz_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Total transfer size in bytes */
-+ unsigned xfersize:19;
-+
-+ /** Data packets to transfer */
-+ unsigned pktcnt:10;
-+
-+ /**
-+ * Packet ID for next data packet
-+ * 0: DATA0
-+ * 1: DATA2
-+ * 2: DATA1
-+ * 3: MDATA (non-Control), SETUP (Control)
-+ */
-+ unsigned pid:2;
-+#define DWC_HCTSIZ_DATA0 0
-+#define DWC_HCTSIZ_DATA1 2
-+#define DWC_HCTSIZ_DATA2 1
-+#define DWC_HCTSIZ_MDATA 3
-+#define DWC_HCTSIZ_SETUP 3
-+
-+ /** Do PING protocol when 1 */
-+ unsigned dopng:1;
-+ } b;
-+
-+ /** register bits */
-+ struct {
-+ /** Scheduling information */
-+ unsigned schinfo:8;
-+
-+ /** Number of transfer descriptors.
-+ * Max value:
-+ * 64 in general,
-+ * 256 only for HS isochronous endpoint.
-+ */
-+ unsigned ntd:8;
-+
-+ /** Data packets to transfer */
-+ unsigned reserved16_28:13;
-+
-+ /**
-+ * Packet ID for next data packet
-+ * 0: DATA0
-+ * 1: DATA2
-+ * 2: DATA1
-+ * 3: MDATA (non-Control)
-+ */
-+ unsigned pid:2;
-+
-+ /** Do PING protocol when 1 */
-+ unsigned dopng:1;
-+ } b_ddma;
-+} hctsiz_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Host DMA Address
-+ * Register used in Descriptor DMA mode.
-+ */
-+typedef union hcdma_data {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ unsigned reserved0_2:3;
-+ /** Current Transfer Descriptor. Not used for ISOC */
-+ unsigned ctd:8;
-+ /** Start Address of Descriptor List */
-+ unsigned dma_addr:21;
-+ } b;
-+} hcdma_data_t;
-+
-+/**
-+ * This union represents the bit fields in the DMA Descriptor
-+ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union host_dma_desc_sts {
-+ /** raw register data */
-+ uint32_t d32;
-+ /** quadlet bits */
-+
-+ /* for non-isochronous */
-+ struct {
-+ /** Number of bytes */
-+ unsigned n_bytes:17;
-+ /** QTD offset to jump when Short Packet received - only for IN EPs */
-+ unsigned qtd_offset:6;
-+ /**
-+ * Set to request the core to jump to alternate QTD if
-+ * Short Packet received - only for IN EPs
-+ */
-+ unsigned a_qtd:1;
-+ /**
-+ * Setup Packet bit. When set indicates that buffer contains
-+ * setup packet.
-+ */
-+ unsigned sup:1;
-+ /** Interrupt On Complete */
-+ unsigned ioc:1;
-+ /** End of List */
-+ unsigned eol:1;
-+ unsigned reserved27:1;
-+ /** Rx/Tx Status */
-+ unsigned sts:2;
-+#define DMA_DESC_STS_PKTERR 1
-+ unsigned reserved30:1;
-+ /** Active Bit */
-+ unsigned a:1;
-+ } b;
-+ /* for isochronous */
-+ struct {
-+ /** Number of bytes */
-+ unsigned n_bytes:12;
-+ unsigned reserved12_24:13;
-+ /** Interrupt On Complete */
-+ unsigned ioc:1;
-+ unsigned reserved26_27:2;
-+ /** Rx/Tx Status */
-+ unsigned sts:2;
-+ unsigned reserved30:1;
-+ /** Active Bit */
-+ unsigned a:1;
-+ } b_isoc;
-+} host_dma_desc_sts_t;
-+
-+#define MAX_DMA_DESC_SIZE 131071
-+#define MAX_DMA_DESC_NUM_GENERIC 64
-+#define MAX_DMA_DESC_NUM_HS_ISOC 256
-+#define MAX_FRLIST_EN_NUM 64
-+/**
-+ * Host-mode DMA Descriptor structure
-+ *
-+ * DMA Descriptor structure contains two quadlets:
-+ * Status quadlet and Data buffer pointer.
-+ */
-+typedef struct dwc_otg_host_dma_desc {
-+ /** DMA Descriptor status quadlet */
-+ host_dma_desc_sts_t status;
-+ /** DMA Descriptor data buffer pointer */
-+ uint32_t buf;
-+} dwc_otg_host_dma_desc_t;
-+
-+/** OTG Host Interface Structure.
-+ *
-+ * The OTG Host Interface Structure structure contains information
-+ * needed to manage the DWC_otg controller acting in host mode. It
-+ * represents the programming view of the host-specific aspects of the
-+ * controller.
-+ */
-+typedef struct dwc_otg_host_if {
-+ /** Host Global Registers starting at offset 400h.*/
-+ dwc_otg_host_global_regs_t *host_global_regs;
-+#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
-+
-+ /** Host Port 0 Control and Status Register */
-+ volatile uint32_t *hprt0;
-+#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
-+
-+ /** Host Channel Specific Registers at offsets 500h-5FCh. */
-+ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
-+#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
-+#define DWC_OTG_CHAN_REGS_OFFSET 0x20
-+
-+ /* Host configuration information */
-+ /** Number of Host Channels (range: 1-16) */
-+ uint8_t num_host_channels;
-+ /** Periodic EPs supported (0: no, 1: yes) */
-+ uint8_t perio_eps_supported;
-+ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
-+ uint16_t perio_tx_fifo_size;
-+
-+} dwc_otg_host_if_t;
-+
-+/**
-+ * This union represents the bit fields in the Power and Clock Gating Control
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union pcgcctl_data {
-+ /** raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** Stop Pclk */
-+ unsigned stoppclk:1;
-+ /** Gate Hclk */
-+ unsigned gatehclk:1;
-+ /** Power Clamp */
-+ unsigned pwrclmp:1;
-+ /** Reset Power Down Modules */
-+ unsigned rstpdwnmodule:1;
-+ /** Reserved */
-+ unsigned reserved:1;
-+ /** Enable Sleep Clock Gating (Enbl_L1Gating) */
-+ unsigned enbl_sleep_gating:1;
-+ /** PHY In Sleep (PhySleep) */
-+ unsigned phy_in_sleep:1;
-+ /** Deep Sleep*/
-+ unsigned deep_sleep:1;
-+ unsigned resetaftsusp:1;
-+ unsigned restoremode:1;
-+ unsigned enbl_extnd_hiber:1;
-+ unsigned extnd_hiber_pwrclmp:1;
-+ unsigned extnd_hiber_switch:1;
-+ unsigned ess_reg_restored:1;
-+ unsigned prt_clk_sel:2;
-+ unsigned port_power:1;
-+ unsigned max_xcvrselect:2;
-+ unsigned max_termsel:1;
-+ unsigned mac_dev_addr:7;
-+ unsigned p2hd_dev_enum_spd:2;
-+ unsigned p2hd_prt_spd:2;
-+ unsigned if_dev_mode:1;
-+ } b;
-+} pcgcctl_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Global Data FIFO Software
-+ * Configuration Register. Read the register into the <i>d32</i> member then
-+ * set/clear the bits using the <i>b</i>it elements.
-+ */
-+typedef union gdfifocfg_data {
-+ /* raw register data */
-+ uint32_t d32;
-+ /** register bits */
-+ struct {
-+ /** OTG Data FIFO depth */
-+ unsigned gdfifocfg:16;
-+ /** Start address of EP info controller */
-+ unsigned epinfobase:16;
-+ } b;
-+} gdfifocfg_data_t;
-+
-+/**
-+ * This union represents the bit fields in the Global Power Down Register
-+ * Register. Read the register into the <i>d32</i> member then set/clear the
-+ * bits using the <i>b</i>it elements.
-+ */
-+typedef union gpwrdn_data {
-+ /* raw register data */
-+ uint32_t d32;
-+
-+ /** register bits */
-+ struct {
-+ /** PMU Interrupt Select */
-+ unsigned pmuintsel:1;
-+ /** PMU Active */
-+ unsigned pmuactv:1;
-+ /** Restore */
-+ unsigned restore:1;
-+ /** Power Down Clamp */
-+ unsigned pwrdnclmp:1;
-+ /** Power Down Reset */
-+ unsigned pwrdnrstn:1;
-+ /** Power Down Switch */
-+ unsigned pwrdnswtch:1;
-+ /** Disable VBUS */
-+ unsigned dis_vbus:1;
-+ /** Line State Change */
-+ unsigned lnstschng:1;
-+ /** Line state change mask */
-+ unsigned lnstchng_msk:1;
-+ /** Reset Detected */
-+ unsigned rst_det:1;
-+ /** Reset Detect mask */
-+ unsigned rst_det_msk:1;
-+ /** Disconnect Detected */
-+ unsigned disconn_det:1;
-+ /** Disconnect Detect mask */
-+ unsigned disconn_det_msk:1;
-+ /** Connect Detected*/
-+ unsigned connect_det:1;
-+ /** Connect Detected Mask*/
-+ unsigned connect_det_msk:1;
-+ /** SRP Detected */
-+ unsigned srp_det:1;
-+ /** SRP Detect mask */
-+ unsigned srp_det_msk:1;
-+ /** Status Change Interrupt */
-+ unsigned sts_chngint:1;
-+ /** Status Change Interrupt Mask */
-+ unsigned sts_chngint_msk:1;
-+ /** Line State */
-+ unsigned linestate:2;
-+ /** Indicates current mode(status of IDDIG signal) */
-+ unsigned idsts:1;
-+ /** B Session Valid signal status*/
-+ unsigned bsessvld:1;
-+ /** ADP Event Detected */
-+ unsigned adp_int:1;
-+ /** Multi Valued ID pin */
-+ unsigned mult_val_id_bc:5;
-+ /** Reserved 24_31 */
-+ unsigned reserved29_31:3;
-+ } b;
-+} gpwrdn_data_t;
-+
-+#endif
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/test/Makefile
-@@ -0,0 +1,16 @@
-+
-+PERL=/usr/bin/perl
-+PL_TESTS=test_sysfs.pl test_mod_param.pl
-+
-+.PHONY : test
-+test : perl_tests
-+
-+perl_tests :
-+ @echo
-+ @echo Running perl tests
-+ @for test in $(PL_TESTS); do \
-+ if $(PERL) ./$$test ; then \
-+ echo "=======> $$test, PASSED" ; \
-+ else echo "=======> $$test, FAILED" ; \
-+ fi \
-+ done
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
-@@ -0,0 +1,337 @@
-+package dwc_otg_test;
-+
-+use strict;
-+use Exporter ();
-+
-+use vars qw(@ISA @EXPORT
-+$sysfsdir $paramdir $errors $params
-+);
-+
-+@ISA = qw(Exporter);
-+
-+#
-+# Globals
-+#
-+$sysfsdir = "/sys/devices/lm0";
-+$paramdir = "/sys/module/dwc_otg";
-+$errors = 0;
-+
-+$params = [
-+ {
-+ NAME => "otg_cap",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 2
-+ },
-+ {
-+ NAME => "dma_enable",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ {
-+ NAME => "dma_burst_size",
-+ DEFAULT => 32,
-+ ENUM => [1, 4, 8, 16, 32, 64, 128, 256],
-+ LOW => 1,
-+ HIGH => 256
-+ },
-+ {
-+ NAME => "host_speed",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ {
-+ NAME => "host_support_fs_ls_low_power",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ {
-+ NAME => "host_ls_low_power_phy_clk",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ {
-+ NAME => "dev_speed",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ {
-+ NAME => "enable_dynamic_fifo",
-+ DEFAULT => 1,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ {
-+ NAME => "data_fifo_size",
-+ DEFAULT => 8192,
-+ ENUM => [],
-+ LOW => 32,
-+ HIGH => 32768
-+ },
-+ {
-+ NAME => "dev_rx_fifo_size",
-+ DEFAULT => 1064,
-+ ENUM => [],
-+ LOW => 16,
-+ HIGH => 32768
-+ },
-+ {
-+ NAME => "dev_nperio_tx_fifo_size",
-+ DEFAULT => 1024,
-+ ENUM => [],
-+ LOW => 16,
-+ HIGH => 32768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_1",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_2",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_3",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_4",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_5",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_6",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_7",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_8",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_9",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_10",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_11",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_12",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_13",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_14",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "dev_perio_tx_fifo_size_15",
-+ DEFAULT => 256,
-+ ENUM => [],
-+ LOW => 4,
-+ HIGH => 768
-+ },
-+ {
-+ NAME => "host_rx_fifo_size",
-+ DEFAULT => 1024,
-+ ENUM => [],
-+ LOW => 16,
-+ HIGH => 32768
-+ },
-+ {
-+ NAME => "host_nperio_tx_fifo_size",
-+ DEFAULT => 1024,
-+ ENUM => [],
-+ LOW => 16,
-+ HIGH => 32768
-+ },
-+ {
-+ NAME => "host_perio_tx_fifo_size",
-+ DEFAULT => 1024,
-+ ENUM => [],
-+ LOW => 16,
-+ HIGH => 32768
-+ },
-+ {
-+ NAME => "max_transfer_size",
-+ DEFAULT => 65535,
-+ ENUM => [],
-+ LOW => 2047,
-+ HIGH => 65535
-+ },
-+ {
-+ NAME => "max_packet_count",
-+ DEFAULT => 511,
-+ ENUM => [],
-+ LOW => 15,
-+ HIGH => 511
-+ },
-+ {
-+ NAME => "host_channels",
-+ DEFAULT => 12,
-+ ENUM => [],
-+ LOW => 1,
-+ HIGH => 16
-+ },
-+ {
-+ NAME => "dev_endpoints",
-+ DEFAULT => 6,
-+ ENUM => [],
-+ LOW => 1,
-+ HIGH => 15
-+ },
-+ {
-+ NAME => "phy_type",
-+ DEFAULT => 1,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 2
-+ },
-+ {
-+ NAME => "phy_utmi_width",
-+ DEFAULT => 16,
-+ ENUM => [8, 16],
-+ LOW => 8,
-+ HIGH => 16
-+ },
-+ {
-+ NAME => "phy_ulpi_ddr",
-+ DEFAULT => 0,
-+ ENUM => [],
-+ LOW => 0,
-+ HIGH => 1
-+ },
-+ ];
-+
-+
-+#
-+#
-+sub check_arch {
-+ $_ = `uname -m`;
-+ chomp;
-+ unless (m/armv4tl/) {
-+ warn "# \n# Can't execute on $_. Run on integrator platform.\n# \n";
-+ return 0;
-+ }
-+ return 1;
-+}
-+
-+#
-+#
-+sub load_module {
-+ my $params = shift;
-+ print "\nRemoving Module\n";
-+ system "rmmod dwc_otg";
-+ print "Loading Module\n";
-+ if ($params ne "") {
-+ print "Module Parameters: $params\n";
-+ }
-+ if (system("modprobe dwc_otg $params")) {
-+ warn "Unable to load module\n";
-+ return 0;
-+ }
-+ return 1;
-+}
-+
-+#
-+#
-+sub test_status {
-+ my $arg = shift;
-+
-+ print "\n";
-+
-+ if (defined $arg) {
-+ warn "WARNING: $arg\n";
-+ }
-+
-+ if ($errors > 0) {
-+ warn "TEST FAILED with $errors errors\n";
-+ return 0;
-+ } else {
-+ print "TEST PASSED\n";
-+ return 0 if (defined $arg);
-+ }
-+ return 1;
-+}
-+
-+#
-+#
-+@EXPORT = qw(
-+$sysfsdir
-+$paramdir
-+$params
-+$errors
-+check_arch
-+load_module
-+test_status
-+);
-+
-+1;
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl
-@@ -0,0 +1,133 @@
-+#!/usr/bin/perl -w
-+#
-+# Run this program on the integrator.
-+#
-+# - Tests module parameter default values.
-+# - Tests setting of valid module parameter values via modprobe.
-+# - Tests invalid module parameter values.
-+# -----------------------------------------------------------------------------
-+use strict;
-+use dwc_otg_test;
-+
-+check_arch() or die;
-+
-+#
-+#
-+sub test {
-+ my ($param,$expected) = @_;
-+ my $value = get($param);
-+
-+ if ($value == $expected) {
-+ print "$param = $value, okay\n";
-+ }
-+
-+ else {
-+ warn "ERROR: value of $param != $expected, $value\n";
-+ $errors ++;
-+ }
-+}
-+
-+#
-+#
-+sub get {
-+ my $param = shift;
-+ my $tmp = `cat $paramdir/$param`;
-+ chomp $tmp;
-+ return $tmp;
-+}
-+
-+#
-+#
-+sub test_main {
-+
-+ print "\nTesting Module Parameters\n";
-+
-+ load_module("") or die;
-+
-+ # Test initial values
-+ print "\nTesting Default Values\n";
-+ foreach (@{$params}) {
-+ test ($_->{NAME}, $_->{DEFAULT});
-+ }
-+
-+ # Test low value
-+ print "\nTesting Low Value\n";
-+ my $cmd_params = "";
-+ foreach (@{$params}) {
-+ $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} ";
-+ }
-+ load_module($cmd_params) or die;
-+
-+ foreach (@{$params}) {
-+ test ($_->{NAME}, $_->{LOW});
-+ }
-+
-+ # Test high value
-+ print "\nTesting High Value\n";
-+ $cmd_params = "";
-+ foreach (@{$params}) {
-+ $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} ";
-+ }
-+ load_module($cmd_params) or die;
-+
-+ foreach (@{$params}) {
-+ test ($_->{NAME}, $_->{HIGH});
-+ }
-+
-+ # Test Enum
-+ print "\nTesting Enumerated\n";
-+ foreach (@{$params}) {
-+ if (defined $_->{ENUM}) {
-+ my $value;
-+ foreach $value (@{$_->{ENUM}}) {
-+ $cmd_params = "$_->{NAME}=$value";
-+ load_module($cmd_params) or die;
-+ test ($_->{NAME}, $value);
-+ }
-+ }
-+ }
-+
-+ # Test Invalid Values
-+ print "\nTesting Invalid Values\n";
-+ $cmd_params = "";
-+ foreach (@{$params}) {
-+ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1;
-+ }
-+ load_module($cmd_params) or die;
-+
-+ foreach (@{$params}) {
-+ test ($_->{NAME}, $_->{DEFAULT});
-+ }
-+
-+ $cmd_params = "";
-+ foreach (@{$params}) {
-+ $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1;
-+ }
-+ load_module($cmd_params) or die;
-+
-+ foreach (@{$params}) {
-+ test ($_->{NAME}, $_->{DEFAULT});
-+ }
-+
-+ print "\nTesting Enumerated\n";
-+ foreach (@{$params}) {
-+ if (defined $_->{ENUM}) {
-+ my $value;
-+ foreach $value (@{$_->{ENUM}}) {
-+ $value = $value + 1;
-+ $cmd_params = "$_->{NAME}=$value";
-+ load_module($cmd_params) or die;
-+ test ($_->{NAME}, $_->{DEFAULT});
-+ $value = $value - 2;
-+ $cmd_params = "$_->{NAME}=$value";
-+ load_module($cmd_params) or die;
-+ test ($_->{NAME}, $_->{DEFAULT});
-+ }
-+ }
-+ }
-+
-+ test_status() or die;
-+}
-+
-+test_main();
-+0;
---- /dev/null
-+++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl
-@@ -0,0 +1,193 @@
-+#!/usr/bin/perl -w
-+#
-+# Run this program on the integrator
-+# - Tests select sysfs attributes.
-+# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc.
-+# -----------------------------------------------------------------------------
-+use strict;
-+use dwc_otg_test;
-+
-+check_arch() or die;
-+
-+#
-+#
-+sub test {
-+ my ($attr,$expected) = @_;
-+ my $string = get($attr);
-+
-+ if ($string eq $expected) {
-+ printf("$attr = $string, okay\n");
-+ }
-+ else {
-+ warn "ERROR: value of $attr != $expected, $string\n";
-+ $errors ++;
-+ }
-+}
-+
-+#
-+#
-+sub set {
-+ my ($reg, $value) = @_;
-+ system "echo $value > $sysfsdir/$reg";
-+}
-+
-+#
-+#
-+sub get {
-+ my $attr = shift;
-+ my $string = `cat $sysfsdir/$attr`;
-+ chomp $string;
-+ if ($string =~ m/\s\=\s/) {
-+ my $tmp;
-+ ($tmp, $string) = split /\s=\s/, $string;
-+ }
-+ return $string;
-+}
-+
-+#
-+#
-+sub test_main {
-+ print("\nTesting Sysfs Attributes\n");
-+
-+ load_module("") or die;
-+
-+ # Test initial values of regoffset/regvalue/guid/gsnpsid
-+ print("\nTesting Default Values\n");
-+
-+ test("regoffset", "0xffffffff");
-+ test("regvalue", "invalid offset");
-+ test("guid", "0x12345678"); # this will fail if it has been changed
-+ test("gsnpsid", "0x4f54200a");
-+
-+ # Test operation of regoffset/regvalue
-+ print("\nTesting regoffset\n");
-+ set('regoffset', '5a5a5a5a');
-+ test("regoffset", "0xffffffff");
-+
-+ set('regoffset', '0');
-+ test("regoffset", "0x00000000");
-+
-+ set('regoffset', '40000');
-+ test("regoffset", "0x00000000");
-+
-+ set('regoffset', '3ffff');
-+ test("regoffset", "0x0003ffff");
-+
-+ set('regoffset', '1');
-+ test("regoffset", "0x00000001");
-+
-+ print("\nTesting regvalue\n");
-+ set('regoffset', '3c');
-+ test("regvalue", "0x12345678");
-+ set('regvalue', '5a5a5a5a');
-+ test("regvalue", "0x5a5a5a5a");
-+ set('regvalue','a5a5a5a5');
-+ test("regvalue", "0xa5a5a5a5");
-+ set('guid','12345678');
-+
-+ # Test HNP Capable
-+ print("\nTesting HNP Capable bit\n");
-+ set('hnpcapable', '1');
-+ test("hnpcapable", "0x1");
-+ set('hnpcapable','0');
-+ test("hnpcapable", "0x0");
-+
-+ set('regoffset','0c');
-+
-+ my $old = get('gusbcfg');
-+ print("setting hnpcapable\n");
-+ set('hnpcapable', '1');
-+ test("hnpcapable", "0x1");
-+ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9)));
-+ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9)));
-+
-+ $old = get('gusbcfg');
-+ print("clearing hnpcapable\n");
-+ set('hnpcapable', '0');
-+ test("hnpcapable", "0x0");
-+ test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9)));
-+ test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9)));
-+
-+ # Test SRP Capable
-+ print("\nTesting SRP Capable bit\n");
-+ set('srpcapable', '1');
-+ test("srpcapable", "0x1");
-+ set('srpcapable','0');
-+ test("srpcapable", "0x0");
-+
-+ set('regoffset','0c');
-+
-+ $old = get('gusbcfg');
-+ print("setting srpcapable\n");
-+ set('srpcapable', '1');
-+ test("srpcapable", "0x1");
-+ test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8)));
-+ test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8)));
-+
-+ $old = get('gusbcfg');
-+ print("clearing srpcapable\n");
-+ set('srpcapable', '0');
-+ test("srpcapable", "0x0");
-+ test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8)));
-+ test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8)));
-+
-+ # Test GGPIO
-+ print("\nTesting GGPIO\n");
-+ set('ggpio','5a5a5a5a');
-+ test('ggpio','0x5a5a0000');
-+ set('ggpio','a5a5a5a5');
-+ test('ggpio','0xa5a50000');
-+ set('ggpio','11110000');
-+ test('ggpio','0x11110000');
-+ set('ggpio','00001111');
-+ test('ggpio','0x00000000');
-+
-+ # Test DEVSPEED
-+ print("\nTesting DEVSPEED\n");
-+ set('regoffset','800');
-+ $old = get('regvalue');
-+ set('devspeed','0');
-+ test('devspeed','0x0');
-+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
-+ set('devspeed','1');
-+ test('devspeed','0x1');
-+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
-+ set('devspeed','2');
-+ test('devspeed','0x2');
-+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2));
-+ set('devspeed','3');
-+ test('devspeed','0x3');
-+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3));
-+ set('devspeed','4');
-+ test('devspeed','0x0');
-+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
-+ set('devspeed','5');
-+ test('devspeed','0x1');
-+ test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
-+
-+
-+ # mode Returns the current mode:0 for device mode1 for host mode Read
-+ # hnp Initiate the Host Negotiation Protocol. Read returns the status. Read/Write
-+ # srp Initiate the Session Request Protocol. Read returns the status. Read/Write
-+ # buspower Get or Set the Power State of the bus (0 - Off or 1 - On) Read/Write
-+ # bussuspend Suspend the USB bus. Read/Write
-+ # busconnected Get the connection status of the bus Read
-+
-+ # gotgctl Get or set the Core Control Status Register. Read/Write
-+ ## gusbcfg Get or set the Core USB Configuration Register Read/Write
-+ # grxfsiz Get or set the Receive FIFO Size Register Read/Write
-+ # gnptxfsiz Get or set the non-periodic Transmit Size Register Read/Write
-+ # gpvndctl Get or set the PHY Vendor Control Register Read/Write
-+ ## ggpio Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits. Read/Write
-+ ## guid Get or set the value of the User ID Register Read/Write
-+ ## gsnpsid Get the value of the Synopsys ID Regester Read
-+ ## devspeed Get or set the device speed setting in the DCFG register Read/Write
-+ # enumspeed Gets the device enumeration Speed. Read
-+ # hptxfsiz Get the value of the Host Periodic Transmit FIFO Read
-+ # hprt0 Get or Set the value in the Host Port Control and Status Register Read/Write
-+
-+ test_status("TEST NYI") or die;
-+}
-+
-+test_main();
-+0;